Powered by Deep Web Technologies
Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Inland Wetlands and Water Courses Regulations (Connecticut)  

Energy.gov (U.S. Department of Energy (DOE))

Regulated activities in or near inland wetlands and water courses include the removal or depositing of material, land or water obstruction or alteration, construction, pollution, or water diversion...

2

Inland Navigation Districts and Florida Inland Navigation District Law  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Inland Navigation Districts and Florida Inland Navigation District Inland Navigation Districts and Florida Inland Navigation District Law (Florida) Inland Navigation Districts and Florida Inland Navigation District Law (Florida) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Florida Program Type Siting and Permitting Provider Florida Inland Navigation District (FIND) The first part of this legislation establishes Inland Navigation Districts,

3

The European land and inland water CO2, CO, CH4 and N2O balance between 2001 and 2005  

SciTech Connect

Globally, terrestrial ecosystems have absorbed about 30% of anthropogenic greenhouse gas emissions over the period 2000-2007 and inter-hemispheric gradients indicate that a significant fraction of terrestrial carbon sequestration must be north of the Equator. We present a compilation of the CO{sub 2}, CO, CH{sub 4} and N{sub 2}O balances of Europe following a dual constraint approach in which (1) a land-based balance derived mainly from ecosystem carbon inventories and (2) a land-based balance derived from flux measurements are compared to (3) the atmospheric data-based balance derived from inversions constrained by measurements of atmospheric GHG (greenhouse gas) concentrations. Good agreement between the GHG balances based on fluxes (1294 {+-} 545 Tg C in CO{sub 2}-eq yr{sup -1}), inventories (1299 {+-} 200 Tg C in CO{sub 2}-eq yr{sup -1}) and inversions (1210 {+-} 405 Tg C in CO{sub 2}-eq yr{sup -1}) increases our confidence that the processes underlying the European GHG budget are well understood and reasonably sampled. However, the uncertainty remains large and largely lacks formal estimates. Given that European net land to atmosphere exchanges are determined by a few dominant fluxes, the uncertainty of these key components needs to be formally estimated before efforts could be made to reduce the overall uncertainty. The net land-to-atmosphere flux is a net source for CO{sub 2}, CO, CH{sub 4} and N{sub 2}O, because the anthropogenic emissions by far exceed the biogenic sink strength. The dual-constraint approach confirmed that the European biogenic sink removes as much as 205 {+-} 72 Tg C yr{sup -1} from fossil fuel burning from the atmosphere. However, This C is being sequestered in both terrestrial and inland aquatic ecosystems. If the C-cost for ecosystem management is taken into account, the net uptake of ecosystems is estimated to decrease by 45% but still indicates substantial C-sequestration. However, when the balance is extended from CO{sub 2} towards the main GHGs, C-uptake by terrestrial and aquatic ecosystems is offset by emissions of non-CO{sub 2} GHGs. As such, the European ecosystems are unlikely to contribute to mitigating the effects of climate change.

Luyassaert, S [CEA-CNRS-UVSQ, LSCE; Abril, G [Laboratoire EPOC, CNRS; Andres, Robert Joseph [ORNL; Bastviken, D [Linkoping University; Bellassen, V [CEA-CNRS-UVSQ, LSCE; Bergamaschi, P [European Commission Joint Research Centre; Bousquet, P [CEA-CNRS-UVSQ, LSCE; Chevallier, F [CEA-CNRS-UVSQ, LSCE; Ciais, P. [LSCE/CEA, Gif-sur-Yvette, France; Corazza, M [European Commission Joint Research Centre; Dechow, R [Johann Heinrich von Thünen Institute; Erb, K-H [Alpen-Adria Universitaet Klagenfurt-Vienna-Graz; Etiope, G [Istituto Nazionale di Geofisica e Vulcanologia; Fortems-Cheiney, A [CEA-CNRS-UVSQ, LSCE; Grassi, G [European Commission Joint Research Centre; Hartmann, J [University of Hamburg; Jung, M. [Max Planck Institute for Biogeochemistry; Lathiere, J [CEA-CNRS-UVSQ, LSCE; Lohila, A [Finnish Meteorological institute; Mayorga, E [University of Washington; Moosdorf, N [University of Hamburg; Njakou, D [University of Antwerp; Otto, J [CEA-CNRS-UVSQ, LSCE; Papale, D. [University of Tuscia; Peters, W [Wageningen University and Research Centre, The Netherlands; Peylin, P [CEA-CNRS-UVSQ, LSCE; Raymond, Peter A [Yale School of Forestry and Environmental Studies; Rodenbeck, C [Max Planck Institute for Biogeochemistry; Saarnio, S [University of Eastern Finland; Schulze, E.-D. [Max Planck Institute for Biogeochemistry; Szopa, S [CEA-CNRS-UVSQ, LSCE; Thompson, R [CEA-CNRS-UVSQ, LSCE; Verkerk, P [European Forest Institute; Vuichard, N [CEA-CNRS-UVSQ, LSCE; Wang, R [Peking University; Wattenbach, M [Helmholtz Centre Potsdam GFZ German Research Centre For Geosciences; Zaehle, S [Max Planck Institute for Biogeochemistry

2012-01-01T23:59:59.000Z

4

Publications, Personnel and Government Organizations Related to the Limnology, Aquatic Biology and Ichthyology of the Inland Waters of Texas  

E-Print Network (OSTI)

This report is the result of a growing concern about the rate at which development of the water resources of Texas is outstripping biological and ecological knowledge of the aquatic environments concerned. Most Texas streams are already much modified by present impoundments, diversions, and pollution. The magnitude of proposed future development is evidenced by planning proposals published in 1961 by the Texas Board of Water Engineers (1) and in 1966 by its successor agency, the Texas Water Development Board (2). Although municipal, industrial, and agricultural water requirements currently have a preeminent role in planning water development, recreational considerations are becoming increasingly important. Factors which influence the quality and quantity of the aquatic biota have a profound effect on recreational potential, as well as on water quality aspects of other water uses. Thus far water resource development in Texas has proceeded with little information available on possible biological effects, and only general predictions can be made based on experience elsewhere. If data are going to be available which will enable effective consideration of biological problems to be made in the planning stages of water development projects, there must be sizable increases in the quantity and quality of aquatic research. The taxonomy and distribution of fresh water fishes in Texas are well known, but ecological data are scarce. Our knowledge of the taxonomy, distribution and ecology of other aquatic organisms in Texas is rudimentary. Baseline information giving data on stream populations prior to development modification is meager, in contrast to the abundant physical and chemical data provided by the United States Geological Survey, the Texas Water Development Board and other agencies. Additional research is still needed on many physical and chemical problems, however. The compilation contained herein has two objectives: (1) to be of assistance to those already working in the fields covered and (2) to provide a status report which may encourage and perhaps make easier the entry of new researchers into these fields. Primary emphasis has been placed on compiling the bibliographic material and on the personnel roster. The data on state and federal agencies and on courses offered at colleges and universities became available in the course of the investigation and has been included primarily to assist those new to the field in becoming oriented.

Clark, W.J.

1966-11-01T23:59:59.000Z

5

Rotary drive mechanism  

Science Conference Proceedings (OSTI)

This patent describes a rotary drive mechanism which includes a rotary solenoid having a stator and multi-poled rotor. A moving member rotates with the rotor and is biased by a biasing device. The biasing device causes a further rotational movement after rotation by the rotary solenoid. Thus, energization of the rotary solenoid moves the member in one direction to one position and biases the biasing device against the member. Subsequently, de- energization of the rotary solenoid causes the biasing device to move the member in the same direction to another position from where the moving member is again movable by energization and de-energization of the rotary solenoid. Preferably, the moving member is a multi-lobed cam having the same number of lobes as the rotor has poles. An anti- overdrive device is also preferably provided for preventing overdrive in the forward direction or a reverse rotation of the moving member and for precisely aligning the moving member.

Kenderdine, E.W.

1991-10-08T23:59:59.000Z

6

Rotary drive mechanism  

Science Conference Proceedings (OSTI)

A rotary drive mechanism includes a rotary solenoid having a stator and multi-poled rotor. A moving member rotates with the rotor and is biased by a biasing device. The biasing device causes a further rotational movement after rotation by the rotary solenoid. Thus, energization of the rotary solenoid moves the member in one direction to one position and biases the biasing device against the member. Subsequently, de-energization of the rotary solenoid causes the biasing device to move the member in the same direction to another position from where the moving member is again movable by energization and de-energization of the rotary solenoid. Preferably, the moving member is a multi-lobed cam having the same number of lobes as the rotor has poles. An anti-overdrive device is also preferably provided for preventing overdrive in the forward direction or a reverse rotation of the moving member and for precisely aligning the moving member.

Kenderdine, Eugene W. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

7

EM Rotary Filter Program  

Electrical Junction Box Motors for Rotary Microfilters Motor Operated Valves Electrical ... savings SMPs Clarified Salt Solution Pumping System Sr-90 and actinides

8

Inland Power and Light Company - Residential Energy Efficiency Rebate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Inland Power and Light Company - Residential Energy Efficiency Inland Power and Light Company - Residential Energy Efficiency Rebate Programs Inland Power and Light Company - Residential Energy Efficiency Rebate Programs < Back Eligibility Residential Savings Category Appliances & Electronics Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Sealing Your Home Ventilation Heat Pumps Water Heating Windows, Doors, & Skylights Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Refrigerators/Freezers Recycling: $30 Electric Water Heaters: $25 Refrigerators/Freezers: $25 Clothes Washers: $20 - $50 Energy Star Site Built Home: $1,000 Northwest Energy Efficient Manufactured Home: $1,000 Air-source Heat Pumps (Installed in an All-Electric Home): $1,000

9

Northern pike bycatch in an inland commercial hoop net fishery: effects of water temperature and net tending frequency on injury, physiology, and survival  

Science Conference Proceedings (OSTI)

In lakes and rivers of eastern Ontario (Canada) commercial fishers use hoop nets to target a variety of fishes, but incidentally capture non-target (i.e., bycatch) gamefish species such as northern pike (Esox lucius). Little is known about the consequences of bycatch in inland commercial fisheries, making it difficult to identify regulatory options. Regulations that limit fishing during warmer periods and that require frequent net tending have been proposed as possible strategies to reduce bycatch mortality. Using northern pike as a model, we conducted experiments during two thermal periods (mid-April: 14.45 ± 0.32 °C, and late May: 17.17 ± 0.08 °C) where fish were retained in nets for 2 d and 6 d. A ‘0 d’ control group consisted of northern pike that were angled, immediately sampled and released. We evaluated injury, physiological status and mortality after the prescribed net retention period and for the surviving fish used radio telemetry with manual tracking to monitor delayed post-release mortality. Our experiments revealed that injury levels, in-net mortality, and post-release mortality tended to increase with net set duration and at higher temperatures. Pike exhibited signs of chronic stress and starvation following retention, particularly at higher temperatures. Total mortality rates were negligible for the 2 d holding period at 14 °C, 14% for 6 d holding at 14 °C, 21% for 2 d holding at 17 °C, and 58% for 6 d holding at 17 °C. No mortality was observed in control fish. Collectively, these data reveal that frequent net tending, particularly at warmer temperatures, may be useful for conserving gamefish populations captured as bycatch in inland hoop net fisheries.

Colotelo, Alison HA; Raby, Graham D.; Hasler, Caleb T.; Haxton, Tim; Smokorowski, Karen; Blouin-Demers, Gabriel; Cooke, Steven J.

2013-01-01T23:59:59.000Z

10

INLAND PORT TRANSPORTATION EVALUATION GUIDE  

E-Print Network (OSTI)

INLAND PORT TRANSPORTATION EVALUATION GUIDE by Robert Harrison, Center for Transportation Research Transportation Institute, The Texas A&M University System; and Jolanda Prozzi, Center for Transportation Research, The University of Texas at Austin CENTER FOR TRANSPORTATION RESEARCH Bureau of Engineering Research

Texas at Austin, University of

11

Inland Power & Light Company - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pumps (Installed in homes with Electric Zonal Heating): 1,500 Window Replacement: 3 per square foot Inland Power & Light offers a variety of rebates through the Conservation...

12

Rotary mechanical latch  

Science Conference Proceedings (OSTI)

A rotary mechanical latch for positive latching and unlatching of a rotary device with a latchable rotating assembly having a latching gear that can be driven to latched and unlatched states by a drive mechanism such as an electric motor. A cam arm affixed to the latching gear interfaces with leading and trailing latch cams affixed to a flange within the drive mechanism. The interaction of the cam arm with leading and trailing latch cams prevents rotation of the rotating assembly by external forces such as those due to vibration or tampering.

Spletzer, Barry L.; Martinez, Michael A.; Marron, Lisa C.

2012-11-13T23:59:59.000Z

13

Solar heated rotary kiln  

SciTech Connect

A solar heated rotary kiln utilized for decomposition of materials, such as zinc sulfate. The rotary kiln has an open end and is enclosed in a sealed container having a window positioned for directing solar energy into the open end of the kiln. The material to be decomposed is directed through the container into the kiln by a feed tube. The container is also provided with an outlet for exhaust gases and an outlet for spent solids, and rests on a tiltable base. The window may be cooled and kept clear of debris by coolant gases.

Shell, Pamela K. (Tracy, CA)

1984-01-01T23:59:59.000Z

14

Rotary shaft sealing assembly  

DOE Patents (OSTI)

A rotary shaft sealing assembly in which a first fluid is partitioned from a second fluid in a housing assembly having a rotary shaft located at least partially within. In one embodiment a lip seal is lubricated and flushed with a pressure-generating seal ring preferably having an angled diverting feature. The pressure-generating seal ring and a hydrodynamic seal may be used to define a lubricant-filled region with each of the seals having hydrodynamic inlets facing the lubricant-filled region. Another aspect of the sealing assembly is having a seal to contain pressurized lubricant while withstanding high rotary speeds. Another rotary shaft sealing assembly embodiment includes a lubricant supply providing a lubricant at an elevated pressure to a region between a lip seal and a hydrodynamic seal with a flow control regulating the flow of lubricant past the lip seal. The hydrodynamic seal may include an energizer element having a modulus of elasticity greater than the modulus of elasticity of a sealing lip of the hydrodynamic seal.

Dietle, Lannie L. (Houston, TX); Schroeder, John E. (Richmond, TX); Kalsi, Manmohan S. (Houston, TX); Alvarez, Patricio D. (Richmond, TX)

2010-09-21T23:59:59.000Z

15

Rotary shaft sealing assembly  

DOE Patents (OSTI)

A rotary shaft sealing assembly in which a first fluid is partitioned from a second fluid in a housing assembly having a rotary shaft located at least partially within. In one embodiment a lip seal is lubricated and flushed with a pressure-generating seal ring preferably having an angled diverting feature. The pressure-generating seal ring and a hydrodynamic seal may be used to define a lubricant-filled region with each of the seals having hydrodynamic inlets facing the lubricant-filled region. Another aspect of the sealing assembly is having a seal to contain pressurized lubricant while withstanding high rotary speeds. Another rotary shaft sealing assembly embodiment includes a lubricant supply providing a lubricant at an elevated pressure to a region between a lip seal and a hydrodynamic seal with a flow control regulating the flow of lubricant past the lip seal. The hydrodynamic seal may include an energizer element having a modulus of elasticity greater than the modulus of elasticity of a sealing lip of the hydrodynamic seal.

Dietle, Lannie L; Schroeder, John E; Kalsi, Manmohan S; Alvarez, Patricio D

2013-08-13T23:59:59.000Z

16

Rotary magnetic heat pump  

DOE Patents (OSTI)

A rotary magnetic heat pump constructed without flow seals or segmented rotor accomplishes recuperation and regeneration by using split flow paths. Heat exchange fluid pumped through heat exchangers and returned to the heat pump splits into two flow components: one flowing counter to the rotor rotation and one flowing with the rotation.

Kirol, Lance D. (Shelly, ID)

1988-01-01T23:59:59.000Z

17

Rotary pneumatic valve  

DOE Patents (OSTI)

A rotary pneumatic valve which is thrust balanced and the pneumatic pressure developed produces only radial loads on the valve cylinder producing negligible resistance and thus minimal torque on the bearings of the valve. The valve is multiplexed such that at least two complete switching cycles occur for each revolution of the cylinder spindle. 4 figs.

Hardee, H.C.

1989-08-02T23:59:59.000Z

18

Rotary Burner Demonstration  

Science Conference Proceedings (OSTI)

The subject technology, the Calcpos Rotary Burner (CRB), is a burner that is proposed to reduce energy consumption and emission levels in comparison to currently available technology. burners are used throughout industry to produce the heat that is required during the refining process. Refineries seek to minimize the use of energy in refining while still meeting EPA regulations for emissions.

Paul Flanagan

2003-04-30T23:59:59.000Z

19

Rotary magnetic heat pump  

DOE Patents (OSTI)

A rotary magnetic heat pump constructed without flow seals or segmented rotor accomplishes recuperation and regeneration by using split flow paths. Heat exchange fluid pumped through heat exchangers and returned to the heat pump splits into two flow components: one flowing counter to the rotor rotation and one flowing with the rotation. 5 figs.

Kirol, L.D.

1987-02-11T23:59:59.000Z

20

Recirculating rotary gas compressor  

DOE Patents (OSTI)

A positive displacement, recirculating Roots-type rotary gas compressor is described which operates on the basis of flow work compression. The compressor includes a pair of large diameter recirculation conduits which return compressed discharge gas to the compressor housing, where it is mixed with low pressure inlet gas, thereby minimizing adiabatic heating of the gas. The compressor includes a pair of involutely lobed impellers and an associated port configuration which together result in uninterrupted flow of recirculation gas. The large diameter recirculation conduits equalize gas flow velocities within the compressor and minimize gas flow losses. The compressor is particularly suited to applications requiring sustained operation at higher gas compression ratios than have previously been feasible with rotary pumps, and is particularly applicable to refrigeration or other applications requiring condensation of a vapor. 12 figs.

Weinbrecht, J.F.

1992-02-25T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Recirculating rotary gas compressor  

DOE Patents (OSTI)

A positive displacement, recirculating Roots-type rotary gas compressor which operates on the basis of flow work compression. The compressor includes a pair of large diameter recirculation conduits (24 and 26) which return compressed discharge gas to the compressor housing (14), where it is mixed with low pressure inlet gas, thereby minimizing adiabatic heating of the gas. The compressor includes a pair of involutely lobed impellers (10 and 12) and an associated port configuration which together result in uninterrupted flow of recirculation gas. The large diameter recirculation conduits equalize gas flow velocities within the compressor and minimize gas flow losses. The compressor is particularly suited to applications requiring sustained operation at higher gas compression ratios than have previously been feasible with rotary pumps, and is particularly applicable to refrigeration or other applications requiring condensation of a vapor.

Weinbrecht, John F. (601 Oakwood Loop, NE., Albuquerque, NM 87123)

1992-01-01T23:59:59.000Z

22

Texas Inland Refining District Operable Crude Oil Distillation ...  

U.S. Energy Information Administration (EIA)

Texas Inland Refining District Operable Crude Oil Distillation Capacity (Thousand Barrels per Calendar Day)

23

Inland Energy Inc | Open Energy Information  

Open Energy Info (EERE)

the 500MW natural gas-fired combined cycle, plus 50MW solar thermal, Victorville 2 power plant. References Inland Energy Inc1 LinkedIn Connections CrunchBase Profile No...

24

Rotary kiln seal  

SciTech Connect

A rotary seal used to prevent the escape of contaminates from a rotating kiln incinerator. The rotating seal combines a rotating disc plate which is attached to the rotating kiln shell and four sets of non-rotating carbon seal bars housed in a primary and secondary housing and which rub on the sides of the disc. A seal air system is used to create a positive pressure in a chamber between the primary and secondary seals to create a positive air flow into the contaminated gas chamber. The seal air system also employs an air inlet located between the secondary and tertiary seals to further insure that no contaminates pass the seal and enter the external environment and to provide makeup air for the air which flows into the contaminated gas chamber. The pressure exerted by the seal bars on the rotating disc is controlled by means of a preload spring. The seal is capable of operating in a thermally changing environment where the both radial expansion and axial movement of the rotating kiln do not result in the failure of the seal.

Drexler, Robert L. (Idaho Falls, ID)

1992-01-01T23:59:59.000Z

25

Rotary kiln seal  

DOE Patents (OSTI)

A rotary seal used to prevent the escape of contaminants from a rotating kiln incinerator. The rotating seal combines a rotating disc plate which is attached to the rotating kiln shell and four sets of non-rotating carbon seal bars housed in a primary and secondary housing and which rub on the sides of the disc. A seal air system is used to create a positive pressure in a chamber between the primary and secondary seals to create a positive air flow into the contaminated gas chamber. The seal air system also employs an air inlet located between the secondary and tertiary seals to further insure that no contaminants pass the seal and enter the external environment and to provide makeup air for the air which flows into the contaminated gas chamber. The pressure exerted by the seal bars on the rotating disc is controlled by means of a preload spring. The seal is capable of operating in a thermally changing environment where the both radial expansion and axial movement of the rotating kiln do not result in the failure of the seal.

Drexler, R.L.

1990-10-17T23:59:59.000Z

26

Performance optimization of rotary dehumidifiers  

SciTech Connect

A rotary dehumidifier consists of a rotating porous matrix made of a desiccant with mechanically supporting materials. The dehumidification performance of a rotary dehumidifier wheel depends on its rotational speed, the sorption properties of the desiccant, the heat and mass transfer characteristics of the matrix, and the size of the dehumidifier. The effect of the rotational speed on the dehumidification performance of a rotary dehumidifier has been investigated by Zheng, Worek, and Novosel (1993). this paper extends that previous work and investigates the effects of desiccant sorption properties, the heat and mass transfer characteristics, and the size of the rotary dehumidifier on the dehumidification performance. The results show that the using desiccant materials in a rotary dehumidifier with different adsorption characteristics results in a wide variation in dehumidification performance. However, the maximum performance of a rotary dehumidifier occurs for a desiccant material having an isotherm shape that can be characterized to have a separation factor of 0.07. Also, as the desiccant moisture uptake increases, the dehumidifier performance also increases. However, the performance improvement for a desiccant matrix having a maximum moisture uptake of larger than 0.25 by weight is not significant. The heat and mass transfer properties and the size of rotary dehumidifier are characterized by the number of transfer units NTU. Generally, the larger the NTU, the better dehumidification performance. However, similar to the maximum moisture uptake, when the NTU is larger than 12, the performance will not improve significantly. Also, the dehumidifier with the most favorable adsorption characteristic has a slower rotational speed, which results in lower power requirements to rotate the desiccant wheel and smaller carry-over losses.

Zheng, W.; Worek, W.M. [Univ. of Chicago, IL (United States). Dept. of Mechanical Engineering; Novosel, D. [Gas Research Inst., Chicago, IL (United States)

1995-02-01T23:59:59.000Z

27

Interaction between an Inland Urban Heat Island and a Sea-Breeze Flow: A Laboratory Study  

Science Conference Proceedings (OSTI)

Using laboratory experimental data taken from a temperature-controlled water tank, the basic features of the circulation associated with an inland urban heat island (UHI) of diameter D and surface heating rate H0 and its interaction with a sea-...

A. Cenedese; P. Monti

2003-11-01T23:59:59.000Z

28

Solar-heated rotary kiln  

DOE Patents (OSTI)

A solar heated rotary kiln utilized for decomposition of materials, such as zinc sulfate is disclosed. The rotary kiln has an open end and is enclosed in a sealed container having a window positioned for directing solar energy into the open end of the kiln. The material to be decomposed is directed through the container into the kiln by a feed tube. The container is also provided with an outlet for exhaust gases and an outlet for spent solids, and rests on a tiltable base. The window may be cooled and kept clear of debris by coolant gases.

Shell, P.K.

1982-04-14T23:59:59.000Z

29

Rotary actuator utilizing a shape memory alloy  

SciTech Connect

An apparatus is described comprising; (a) rotary accumulator means for accumulating a length of a shape memory alloy wire; (b) the shape memory alloy wire attached at one end to a point fixed with respect to the rotary accumulator means and attached at a second end to the rotary accumulator means; (c) biasing means for biasing the rotary accumulator means to a first position; and (d) means for heating the shape memory alloy wire to cause the shape memory alloy wire to contract, thereby rotating the rotary accumulator means from the first position to a second position.

Bloch, J.T.

1988-08-09T23:59:59.000Z

30

Inland Empire Utilities Agency IEUA | Open Energy Information  

Open Energy Info (EERE)

Agency IEUA Agency IEUA Jump to: navigation, search Name Inland Empire Utilities Agency (IEUA) Place Chino, California Sector Renewable Energy, Services, Solar Product Water utility that also offers renewable energy services through methane gas and solar generation. Coordinates 34.012811°, -117.689328° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":34.012811,"lon":-117.689328,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

31

Federal Memorandum of Understanding for Hydropower/Federal Inland  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Federal Memorandum of Understanding for Hydropower/Federal Inland Hydropower Working Group < Federal Memorandum of Understanding for Hydropower Jump to: navigation, search Federal Memorandum of Understanding for Hydropower Hydroelectric-collage2.jpg Home Federal Inland Hydropower Working Group Participating Agencies Resources Federal Inland Hydropower Working Group The Federal Inland Hydropower Working Group is made up of 15 federal entities involved in the regulation, management, or development of hydropower resources (including hydrokinetics) in rivers and streams of the

32

Inland Power & Light Company (Idaho) | Open Energy Information  

Open Energy Info (EERE)

Power & Light Company (Idaho) Jump to: navigation, search Name Inland Power & Light Company Place Idaho Utility Id 8699 References EIA Form EIA-861 Final Data File for 2010 -...

33

High bandwidth rotary fast tool servos and a hybrid rotary/linear electromagnetic actuator  

E-Print Network (OSTI)

This thesis describes the development of two high bandwidth short-stroke rotary fast tool servos and the hybrid rotary/linear electromagnetic actuator developed for one of them. Design insights, trade-off methodologies, ...

Montesanti, Richard Clement

2005-01-01T23:59:59.000Z

34

Automated container transport system between inland port and terminals  

Science Conference Proceedings (OSTI)

In this article we propose a new concept called automated container transportation system between inland port and terminals (ACTIPOT) which involves the use of automated trucks to transfer containers between an inland port and container terminals. The ... Keywords: Automated container transportation system, Petri nets, automated truck, supervisory control, vehicle control

Jianlong Zhang; Petros A. Ioannou; Anastasios Chassiakos

2006-04-01T23:59:59.000Z

35

Rotary kilns - transport phenomena and transport processes  

Science Conference Proceedings (OSTI)

Rotary kilns and rotating industrial drying ovens are used for a wide variety of applications including processing raw minerals and feedstocks as well as heat-treating hazardous wastes. They are particularly critical in the manufacture of Portland cement. Their design and operation is critical to their efficient usage, which if done incorrectly can result in improperly treated materials and excessive, high fuel costs. This book treats all engineering aspects of rotary kilns, including thermal and fluid principles involved in their operation, as well as how to properly design an engineering process that uses rotary kilns. Chapter 1: The Rotary Kiln Evolution and Phenomenon Chapter 2: Basic Description of Rotary Kiln Operation Chapter 3: Freeboard Aerodynamic Phenomena Chapter 4: Granular Flows in Rotary Kilns Chapter 5: Mixing and Segregation Chapter 6: Combustion and Flame - includes section on types of fuels used in rotary kilns, coal types, ranking and analysis, petroleum coke combustion, scrap tire combustion, pulverized fuel (coal/coke) firing in kilns, pulverized fuel delivery and firing systems. Chapter 7: Freeboard Heat Transfer Chapter 8: Heat Transfer Processes in the Rotary Kiln Bed Chapter 9: Mass and Energy Balance Chapter 10: Rotary Kiln Minerals Process Applications.

Boateng, A.

2008-01-15T23:59:59.000Z

36

Inland Pacific Energy Center | Open Energy Information  

Open Energy Info (EERE)

Pacific Energy Center Pacific Energy Center Jump to: navigation, search Name Inland Pacific Energy Center Place Stanfield, Oregon Sector Biofuels Product Biofuels producer currently developing a portfolio of ethanol and biodiesel projects in Stanfield, Oregon. Coordinates 45.78095°, -119.217704° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.78095,"lon":-119.217704,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

37

Rotary union for use with ultrasonic thickness measuring probe  

DOE Patents (OSTI)

A rotary union for rotatably supporting an ultrasonic probe operable to nondestructively measure the thickness of steam generator tubes to determine the amount of corrosion experienced by the tubes includes a stationary body having a bore therethrough and an outlet drain, and a fitting rotatably mounted within the upper end of the body. The fitting has a bore aligned with the bore of the body. An electrical cable positioned within a water supply tube in an annular arrangement passes through the bore of the body and the bore of the fitting. This annular arrangement, in turn, is positioned within a connector element which extends outwardly from the fitting bore and is connected to the ultrasonic probe. An elastomeric lower bushing seals the annular arrangement to the lower end of the rotary union body and an elastomeric upper bushing seals the connector element to the fitting to permit the connector element and the ultrasonic probe connected thereto to rotate with the fitting relative to the body. The lower and upper bushings permit water to be passed through the annular arrangement and into the ultrasonic probe and thereafter discharged between the annular arrangement and the connector element to the outlet drain of the rotary union body. 5 figs.

Nachbar, H.D.

1992-09-15T23:59:59.000Z

38

Inland Empire Utility Agency (IEUA) | Open Energy Information  

Open Energy Info (EERE)

Inland Empire Utility Agency (IEUA) Inland Empire Utility Agency (IEUA) Jump to: navigation, search Name Inland Empire Utility Agency (IEUA) Facility Inland Empire Utility Agency (IEUA) Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Foundation Windpower Developer Foundation Windpower Energy Purchaser IEUA Location Chino CA Coordinates 34.08495622°, -117.5266421° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":34.08495622,"lon":-117.5266421,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

39

Inland Power & Light Company- Agricultural Energy Efficiency Rebate Programs  

Energy.gov (U.S. Department of Energy (DOE))

Inland Power offers a variety of incentives for agricultural/irrigation customers to save energy on participating farms. Rebates are available for a variety of sprinkler equipment (nozzles, gaskets...

40

Observations of Fluxes and Inland Breezes over a Heterogeneous Surface  

Science Conference Proceedings (OSTI)

Repeated aircraft runs at about 33 m over heterogeneous terrain are analyzed to study the spatial variability of the mesoscale flow and turbulent fluxes. An irrigated area, about 12 km across, generates a relatively cool moist inland breeze. As ...

L. Mahrt; Jielun Sun; Dean Vickers; J. I. Macpherson; J. R. Pederson; R. L. Desjardins

1994-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Floating seal system for rotary devices  

DOE Patents (OSTI)

This invention relates to a floating seal system for rotary devices to reduce gas leakage around the rotary device in a duct and across the face of the rotary device to an adjacent duct. The peripheral seal bodies are made of resilient material having a generally U-shaped cross section wherein one of the legs is secured to a support member and the other of the legs forms a contacting seal against the rotary device. The legs of the peripheral seal form an extended angle of intersection of about 10.degree. to about 30.degree. in the unloaded condition to provide even sealing forces around the periphery of the rotary device. The peripheral seal extends around the periphery of the support member except where intersected by radial seals which reduce gas leakage across the face of the rotary device and between adjacent duct portions. The radial seal assembly is fabricated from channel bars, the smaller channel bar being secured to the divider of the support member and a larger inverted rigid floating channel bar having its legs freely movable over the legs of the smaller channel bar forming therewith a tubular channel. A resilient flexible tube is positioned within the tubular channel for substantially its full length to reduce gas leakage across the tubular channel. A spacer extends beyond the face of the floating channel near each end of the floating channel a distance to provide desired clearance between the floating channel and the face of the rotary device.

Banasiuk, Hubert A. (Chicago, IL)

1983-01-01T23:59:59.000Z

42

Floating seal system for rotary devices  

DOE Patents (OSTI)

This invention relates to a floating seal system for rotary devices to reduce gas leakage around the rotary device in a duct and across the face of the rotary device to an adjacent duct. The peripheral seal bodies are made of resilient material having a generally U-shaped cross section wherein one of the legs is secured to a support member and the other of the legs forms a contacting seal against the rotary device. The legs of the peripheral seal form an extended angle of intersection of about 10[degree] to about 30[degree] in the unloaded condition to provide even sealing forces around the periphery of the rotary device. The peripheral seal extends around the periphery of the support member except where intersected by radial seals which reduce gas leakage across the face of the rotary device and between adjacent duct portions. The radial seal assembly is fabricated from channel bars, the smaller channel bar being secured to the divider of the support member and a larger inverted rigid floating channel bar having its legs freely movable over the legs of the smaller channel bar forming therewith a tubular channel. A resilient flexible tube is positioned within the tubular channel for substantially its full length to reduce gas leakage across the tubular channel. A spacer extends beyond the face of the floating channel near each end of the floating channel a distance to provide desired clearance between the floating channel and the face of the rotary device. 5 figs.

Banasiuk, H.A.

1983-08-23T23:59:59.000Z

43

Enclosed rotary disc air pulser  

DOE Patents (OSTI)

An enclosed rotary disc air pulser for use with a solvent extraction pulse olumn includes a housing having inlet, exhaust and pulse leg ports, a shaft mounted in the housing and adapted for axial rotation therein, first and second disc members secured to the shaft within the housing in spaced relation to each other to define a chamber therebetween, the chamber being in communication with the pulse leg port, the first disc member located adjacent the inlet port, the second disc member being located adjacent the exhaust port, each disc member having a milled out portion, the disc members positioned on the shaft so that as the shaft rotates, the milled out portions permit alternative cyclical communication between the inlet port and the chamber and the exhaust port and the chamber.

Olson, A. L. (Idaho Falls, ID); Batcheller, Tom A. (Idaho Falls, ID); Rindfleisch, J. A. (Arco, ID); Morgan, John M. (Arco, ID)

1989-01-01T23:59:59.000Z

44

Enclosed rotary disc air pulser  

DOE Patents (OSTI)

This invention is comprised of an enclosed rotary disc air pulser for use with a solvent extraction pulse column includes a housing having inlet, exhaust and pulse leg ports, a shaft mounted in the housing and adapted for axial rotation therein, first and second disc members secured to the shaft within the housing in spaced relation to each other to define a chamber there between, the chamber being in communication with the pulse leg port, and first disc member located adjacent the inlet port, the second disc member being located adjacent the exhaust port, each disc member having a milled out portion, the disc members positioned on the shaft so that as the shaft rotates, the milled out portions permit alternative cyclical communication between the inlet port and the chamber and the exhaust port and chamber. 5 figs.

Olson, A.L.; Batcheller, T.A.; Rindfleisch, J.A.; Morgan, J.M.

1988-08-12T23:59:59.000Z

45

Experimental Results on Advanced Rotary Desiccant Dehumidifiers  

E-Print Network (OSTI)

The Solar Energy Research Institute (SERI) has developed the Cyclic Test Facility (CTF) to develop and validate analytical methods for evaluating and predicting the performance of advanced rotary dehumidifiers. This paper describes the CTF, the dehumidifiers tested at the CTF, and the analytical methods used. The results reported provide an engineering data base and a design tool for evaluating rotary dehumidifiers for desiccant cooling applications.

Barathan, D.; Parsons, J. M.; MaClaine-Cross, I.

1986-01-01T23:59:59.000Z

46

Experimental results on advanced rotary desiccant dehumidifiers  

DOE Green Energy (OSTI)

The Solar Energy Research Institute (SERI) has developed the Cyclic Test Facility (CTF) to develop and validate analytical methods for evaluating and predicting the performance of advanced rotary dehumidifiers. This paper describes the CTF, the dehumidifiers tested at the CTF, and the analytical methods used. The results reported provide an engineering data base and a design tool for evaluating rotary dehumidifiers for desiccant cooling applications.

Bharathan, D.; Parsons, J.; Maclaine-cross, I.

1986-08-01T23:59:59.000Z

47

Coal desulfurization in a rotary kiln combustor  

Science Conference Proceedings (OSTI)

The purpose of this project was to demonstrate the combustion of coal and coal wastes in a rotary kiln reactor with limestone addition for sulfur control. The rationale for the project was the perception that rotary systems could bring several advantages to combustion of these fuels, and may thus offer an alternative to fluid-bed boilers. Towards this end, an existing wood pyrolysis kiln (the Humphrey Charcoal kiln) was to be suitably refurbished and retrofitted with a specially designed version of a patented air distributor provided by Universal Energy, Inc. (UEI). As the project progressed beyond the initial stages, a number of issues were raised regarding the feasibility and the possible advantages of burning coals in a rotary kiln combustor and, in particular, the suitability of the Humphrey Charcoal kiln as a combustor. Instead, an opportunity arose to conduct combustion tests in the PEDCO Rotary Cascading-Bed Boiler (RCBB) commercial demonstration unit at the North American Rayon CO. (NARCO) in Elizabethton, TN. The tests focused on anthracite culm and had two objectives: (a) determine the feasibility of burning anthracite culms in a rotary kiln boiler and (b) obtain input for any further work involving the Humphrey Charcoal kiln combustor. A number of tests were conducted at the PEDCO unit. The last one was conducted on anthracite culm procured directly from the feed bin of a commercial circulating fluid-bed boiler. The results were disappointing; it was difficult to maintain sustained combustion even when large quantities of supplemental fuel were used. Combustion efficiency was poor, around 60 percent. The results suggest that the rotary kiln boiler, as designed, is ill-suited with respect to low-grade, hard to burn solid fuels, such as anthracite culm. Indeed, data from combustion of bituminous coal in the PEDCO unit suggest that with respect to coal in general, the rotary kiln boiler appears inferior to the circulating fluid bed boiler.

Cobb, J.T. Jr.

1992-09-11T23:59:59.000Z

48

Inland Power & Light Company | Open Energy Information  

Open Energy Info (EERE)

Power & Light Company Power & Light Company Jump to: navigation, search Name Inland Power & Light Company Address 10110 W. Hallett Road Place Washington Zip 99224 Utility Id 8699 Utility Location Yes Ownership C NERC Location WECC NERC WECC Yes Activity Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] [2] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Contents 1 About 2 Energy Rates 3 Utility Rate Schedules 4 Average Rates 5 References About Inland Power & Light Company is a utility company located in Spokane, Washington, providing power over 38,000 customers. It is the largest cooperative in Washington state. Energy Rates As of April 1, 2010, these are the rates and fees at Inland Power and Light

49

California Inland Empire Council Boy Scouts of America PARENT/GUARDIAN CONSENT FORM  

E-Print Network (OSTI)

California Inland Empire Council Boy Scouts of America PARENT/GUARDIAN CONSENT FORM to Safe Scouting. TALENT RELEASE (Yes) (No) I hereby assign and grant to the California Inland Empire/electronic representations and/or sound recordings made by the California Inland Empire Council and I hereby release

50

Power Production from Geothermal Brine with the Rotary Separator Turbine  

SciTech Connect

The rotary separator turbine is a new turbine device that operates with gas-liquid mixtures. This device achieves complete gas-liquid separation, generates power from the liquid and repressurizes the liquid. The use of the rotary separator turbine for geothermal power generation was investigated on this program. A pilot scale unit was designed and tested. Tests were conducted with a clean water/steam mixture and with geothermal brine/steam flows at East Mesa, California; Raft River, Idaho; and Roosevelt Hot Springs, Utah. The test results were used to calculate the performance advantage of a rotary separator turbine power system compared to a flash steam power system and a binary power system. The calculated performance advantages were then used to estimate market potential for wellhead and central station Biphase units. The measured performance in the laboratory and in the field agreed to within {+-} 10% of the predicted values. The design goal of 20 kWe was generated both in the laboratory and from brine. Separated steam quality was measured to be greater than 99.96% at all three geothermal resources and in the laboratory. Brine pressure leaving the test unit was greater than reinjection pressure requirements. Maximum brine outlet pressure of 90 psig was demonstrated. The measured performance values would result in a 34% increase in electric power production above a single stage flash steam system. Increasing the size from the pilot size unit (20kWe) to a wellhead unit (2000 kWe) gave a calculated performance advantage of 40%. Based on these favorable results, design, construction and testing of a full-size well-head unit was initiated.

Cerini, Donald J.; Hays, Lance G.

1980-12-01T23:59:59.000Z

51

ORNL Trusted Corridors Project: Watts Bar Dam Inland Waterway Project  

Science Conference Proceedings (OSTI)

Radiation has existed everywhere in the environment since the Earth's formation - in rocks, soil, water, and plants. The mining and processing of naturally occurring radioactive materials for use in medicine, power generation, consumer products, and industry inevitably generate emissions and waste. Radiological measuring devices have been used by industry for years to measure for radiation in undesired locations or simply identify radioactive materials. Since the terrorist attacks on the United States on 9-11-01 these radiation measuring devices have proliferated in many places in our nation's commerce system. DOE, TVA, the Army Corps and ORNL collaborated to test the usefulness of these devices in our nation's waterway system on this project. The purpose of the Watts Bar Dam ORNL Trusted Corridors project was to investigate the security, safety and enforcement needs of local, state and federal government entities for state-of-the-art sensor monitoring in regards to illegal cargo including utilization of the existing infrastructure. TVA's inland waterways lock system is a recognized and accepted infrastructure by the commercial carrier industry. Safety Monitoring activities included tow boat operators, commercial barges and vessels, recreational watercraft and their cargo, identification of unsafe vessels and carriers, and, monitoring of domestic and foreign commercial vessels and cargo identification. Safety Enforcement activities included cargo safety, tracking, identification of hazardous materials, waterway safety regulations, and hazardous materials regulations. Homeland Security and Law Enforcement Applications included Radiological Dispersive Devices (RDD) identification, identification of unsafe or illicit transport of hazardous materials including chemicals and radiological materials, and screening for shipments of illicit drugs. In the Fall of 2005 the SensorNet funding for the project expired. After several unsuccessful attempts to find a Federal sponsor to continue with the project, the Watts Bar Dam Project was canceled and the Exploranium radiation monitors were removed from the doors of Watts Bar Dam in early 2006. The DHS Domestic Nuclear Detection Office decided to proceed with a Pilot building on the ORNL work performed at the TN and SC weigh stations in the highway sector of the Trusted Corridors project and eventually expanded it to other southern states under the name of Southeastern Corridor Pilot Project (SETCP). Many of the Phase I goals were achieved however real-world test data of private watercraft and barges was never obtained.

Walker, Randy M [ORNL; Gross, Ian G [ORNL; Smith, Cyrus M [ORNL; Hill, David E [ORNL

2011-11-01T23:59:59.000Z

52

BACKPRESSURE TESTING OF ROTARY MICROFILTER DISKS  

Science Conference Proceedings (OSTI)

The Savannah River National Laboratory (SRNL), under the Department of Energy (DOE) Office of Environmental Management (EM), is modifying and testing the SpinTek{trademark} rotary microfilter (RMF) for radioactive filtration service in the Department of Energy (DOE) complex. The RMF has been shown to improve filtration throughput when compared to other conventional methods such as cross-flow filtration. A concern with the RMF was that backpressure, or reverse flow through the disk, would damage the filter membranes. Reverse flow might happen as a result of an inadvertent valve alignment during flushing. Testing was completed in the Engineering Development Laboratory (EDL) located in SRNL to study the physical effects of backpressure as well as to determine the maximum allowable back-pressure for RMF disks. The RMF disks tested at the EDL were manufactured by SpinTek{trademark} Filtration and used a Pall Corporation PMM050 filter membrane (0.5 micron nominal pore size) made from 316L stainless steel. Early versions of the RMF disks were made from synthetic materials that were incompatible with caustic solutions and radioactive service as well as being susceptible to delaminating when subjected to backpressure. Figure 1-1 shows the essential components of the RMF; 3 rotating disks and 3 stationary turbulence promoters (or shear elements) are shown. Figure 1-2 show the assembly view of a 25 disk RMF proposed for use at the Savannah River Site (SRS) and at the Hanford Facility. The purpose of the testing discussed in this report was to determine the allowable backpressure for RMF disks as well as study the physical effects of backpressure on RMF disks made with the Pall PMM050 membrane. This was accomplished by pressurizing the disks in the reverse flow direction (backpressure) until the test limit was reached or until membrane failure occurred. Backpressure was applied to the disks with air while submerged in deionized (DI) water. This method provided a visual representation of membrane integrity via bubble flow patterns. Membrane failure was defined as the inability to filter effectively at the nominal filter pore size. Effective filtration was determined by turbidity measurements of filtrate that was produced by applying forward-pressure to the disks while submerged in a representative simulant. The representative simulant was Tank 8F simulated sludge produced for SRNL by Optima Chemical. Two disks were tested. Disk 1 was tested primarily to determine approximate levels of backpressure where membrane failure occurred. These levels were then used to define the strategy for testing the Disk 2; a strategy that would better define and quantify the mode of failure.

Fowley, M.; Herman, D.

2011-04-14T23:59:59.000Z

53

Compact fast analyzer of rotary cuvette type  

DOE Patents (OSTI)

A compact fast analyzer of the rotary cuvette type is provided for simultaneously determining concentrations in a multiplicity of discrete samples using either absorbance or fluorescence measurement techniques. A rigid, generally rectangular frame defines optical passageways for the absorbance and fluorescence measurement systems. The frame also serves as a mounting structure for various optical components as well as for the cuvette rotor mount and drive system. A single light source and photodetector are used in making both absorbance and fluorescence measurements. Rotor removal and insertion are facilitated by a swing-out drive motor and rotor mount. BACKGROUND OF THE INVENTION The invention relates generally to concentration measuring instruments and more specifically to a compact fast analyzer of the rotary cuvette type which is suitable for making either absorbance or fluorescence measurements. It was made in the course of, or under, a contract with the U.S. Atomic Energy Commission.

Thacker, Louis H. (Knoxville, TN)

1976-01-01T23:59:59.000Z

54

Rotary Mode Core Sample System availability improvement  

SciTech Connect

The Rotary Mode Core Sample System (RMCSS) is used to obtain stratified samples of the waste deposits in single-shell and double-shell waste tanks at the Hanford Site. The samples are used to characterize the waste in support of ongoing and future waste remediation efforts. Four sampling trucks have been developed to obtain these samples. Truck I was the first in operation and is currently being used to obtain samples where the push mode is appropriate (i.e., no rotation of drill). Truck 2 is similar to truck 1, except for added safety features, and is in operation to obtain samples using either a push mode or rotary drill mode. Trucks 3 and 4 are now being fabricated to be essentially identical to truck 2.

Jenkins, W.W.; Bennett, K.L.; Potter, J.D. [Westinghouse Hanford Co., Richland, WA (United States); Cross, B.T.; Burkes, J.M.; Rogers, A.C. [Southwest Research Institute (United States)

1995-02-28T23:59:59.000Z

55

High Pressure Rotary Shaft Sealing Mechanism  

DOE Patents (OSTI)

A laterally translatable pressure staged rotary shaft sealing mechanism having a seal housing with a shaft passage therein being exposed to a fluid pressure P1 and with a rotary shaft being located within the shaft passage. At least one annular laterally translatable seal carrier is provided. First and second annular resilient sealing elements are supported in axially spaced relation by the annular seal carriers and have sealing relation with the rotary shaft. The seal housing and at least one seal carrier define a first pressure staging chamber exposed to the first annular resilient sealing element and a second pressure staging chamber located between and exposed to the first and second annular resilient sealing elements. A first fluid is circulated to the first pressure chamber at a pressure P1, and a second staging pressure fluid is circulated to the second pressure chamber at a fraction of pressure P1 to achieve pressure staging, cooling of the seals. Seal placement provides hydraulic force balancing of the annular seal carriers.

Dietle, Lannie (Sugar Land, TX); Gobeli, Jeffrey D. (Houston, TX)

2001-05-08T23:59:59.000Z

56

Coal desulfurization in a rotary kiln combustor  

Science Conference Proceedings (OSTI)

BCR National Laboratory (BCRNL) has initiated a project aimed at evaluating the technical and economic feasibility of using a rotary kiln, suitably modified, to burn Pennsylvania anthracite wastes, co-fired with high-sulfur bituminous coal. Limestone will be injected into the kiln for sulfur control, to determine whether high sulfur capture levels can be achieved with high sorbent utilization. The principal objectives of this work are: (1) to prove the feasibility of burning anthracite refuse, with co-firing of high-sulfur bituminous coal and with limestone injection for sulfur emissions control, in a rotary kiln fitted with a Universal Energy International (UEI) air injector system; (2) to determine the emissions levels of SO{sub x} and NO{sub x} and specifically to identify the Ca/S ratios that are required to meet New Source Performance Standards; (3) to evaluate the technical and economic merits of a commercial rotary kiln combustor in comparison to fluidized bed combustors; and, (4) to ascertain the need for further work, including additional combustion tests, prior to commercial application, and to recommend accordingly a detailed program towards this end.

Cobb, J.T. Jr.

1990-08-15T23:59:59.000Z

57

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on...

58

A unidirectional rotary solenoid as applied to stronglinks  

Science Conference Proceedings (OSTI)

This paper describes the design goals and results of an advanced development stronglink project with special emphasis on a new rotary solenoid concept. 10 figs.

Kenderdine, E.W.

1988-01-01T23:59:59.000Z

59

TESTING OF THE SECOND GENERATION SPINTEK ROTARY FILTER -11357  

SciTech Connect

The SpinTek rotary microfilter has been developed under the Department of Energy (DOE) Office of Environmental Management (EM) for the purpose of deployment in radioactive service in the DOE complex. The unit that was fabricated and tested is the second generation of the filter that incorporates recommended improvements from previous testing. The completion of this test satisfied a key milestone for the EM technology development program and technology readiness for deployment by Savannah River Remediation in the Small Column Ion Exchange and Sludge Washing processes at the Savannah River Site (SRS). The Savannah River National Laboratory (SRNL) contracted SpinTek Filtration to fabricate a full scale 25 disk rotary filter and perform a 1000 hour endurance test with a simulated SRS sludge. Over 1500 hours of operation have been completed with the filter. SpinTek Filtration fabricated a prototypic 25 disk rotary filter including updates to manufacturing tolerances, an updated design to the rotary joint, improved cooling to the bottom journal, decreases in disk and filter shaft hydraulic resistances. The filter disks were fabricated with 0.5 {micro} pore size, sintered-metal filter media manufactured by Pall Corporation (M050). After fabrication was complete, the filter passed acceptance tests demonstrating rejection of solids and clean water flux with a 50% improvement over the previous filters. Once the acceptance test was complete, a 1000 hour endurance test was initiated simulating a sludge washing process. The test used a simulated SRS Sludge Batch 6 recipe. The insoluble solids started at 5 wt% and were raised to 10 and 15 wt% insoluble solids to simulate the concentration of a large volume tank. The filter system was automated and set up for 24 hour unattended operation. To facilitate this, process control logic was written to operate the filter. During the development it was demonstrated that the method of starting and stopping the filter can affect the build up of filter cake on the disks and therefore the performance of the filter. The filter performed well with the simulant. Very little drop in production was noticed between the 5 and 10 wt% insoluble solids feed. Increasing to 15 wt% had a more pronounced impact due to the rheology of the feed. Acid cleaning was used to clean the filter disks in-situ and restore filtration rate to almost 90% of the initial clean disk rate. Eighty liters of 0.2 M nitric acid in conjunction with water rinses were used to clean the filter in less than 2 hours. Filter testing was completed after 1000 hours of operation were performed on the final filter assembly configuration. The total run time for the testing was over 1500 hours. At the end of the test, the sludge washing was performed successfully from approximately 5.6 M to less than 1 M sodium.

Herman, D.; Poirier, M.; Fowley, M.; Keefer, M.; Huff, T.

2011-02-02T23:59:59.000Z

60

Habitat Use and Spatial Relationships of American Alligator withHabitat Use and Spatial Relationships of American Alligator within Inland Wetlands of East Texasin Inland Wetlands of East Texas Introduction  

E-Print Network (OSTI)

Relationships of American Alligator within Inland Wetlands of East Texasin Inland Wetlands of East Texas rebounded to allow hunting throughout most of their range In Texas, management strategies are based upon

Hung, I-Kuai

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Demonstration of a rotary separator for two-phase brine and steam flows. Final report  

DOE Green Energy (OSTI)

The application of a two-phase rotary separator for geothermal energy conversion was demonstrated. Laboratory tests were conducted with clean water and steam at Biphase Energy Systems, Inc., Santa Monica, California. Field tests were conducted at the Union Oil Co., Tow No. 1 wellsite near Brawley, California. The system tested consisted of the major components of a total flow rotary separator/turbine conversion system. A nozzle converted the brine wellhead enthalpy to two-phase flow kinetic by impinging the nozzle flow tangentially on the inside of the separator. The flow was therefore subjected to the high centrifugal force field in the separator. This caused the liquid phase to collect as a film on the separator drum with very little energy loss. The steam was allowed to flow radially inward to the central steam discharge. Potable water was obtained by condensing the steam exhaust. The brine collection system converted the liquid film kinetic energy to static pressure head. The system was operated for 116 hours in a high salinity environment (115,000 ppM TDS). The system operated properly with no adverse effects from solids precipitation or scale buildup. The rotary separator produced separate flows of pure liquid and steam of greater than 99.5% quality.

Cerini, D.J.

1978-01-01T23:59:59.000Z

62

Coal desulfurization in a rotary kiln combustor  

Science Conference Proceedings (OSTI)

Several issues that could have an impact on the capability to burn anthracite culm in a rotary bed boiler were identified; specifically, questions were raised concerning the specifications of the anthracite culm itself and some relating to the equipment. The anthracite culm delivered was wet, (with more than 10 percent moisture), and coarser than feed material for fluidized boilers. It was felt that using finer fuel, ensuring that it is largely dry, would aid the combustion of anthracite culm. It also appeared that if provisions were made for more efficient internal and external recycle of ash, this would also enhance the combustion of this fuel. Accordingly, the decision was made to conduct an additional campaign of tests that would incorporate these changes. The tests, conducted on July 15 and 16, 1991, involved an anthracite culm that was, in fact, obtained from a fluidized bed a heating value of 3,000 Btu/lb and came with a top size of 1/4-inch. Despite these changes, sustained combustion could not be achieved without the use of large quantities of supplemental fuel. Based on these tests, we tend to conclude that the rotary kiln is ill suited for the combustion of hard-to-burn, low-grade solid fuels like anthracite culm.

Cobb, J.T. Jr.

1991-08-29T23:59:59.000Z

63

Inland Power and Light Company - Agricultural Energy Efficiency Rebate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agricultural Energy Efficiency Agricultural Energy Efficiency Rebate Programs Inland Power and Light Company - Agricultural Energy Efficiency Rebate Programs < Back Eligibility Agricultural Savings Category Other Manufacturing Maximum Rebate Custom: 70% or project cost Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Flow controlling type nozzle for impact sprinklers: $4 Rebuilt or New Impact Sprinklers: $3.75 Nozzle for Impact Sprinkler: $1.50 Rotating Type Sprinklers: $4 Gasket: $2.75 Low-Pressure Regulators: $5 Low-Pressure Sprinklers: $4 Multiple Configuration Nozzles: $3 Multi-Trajectory Sprays: $4 Drains for Lines: $1 Hubs for Wheel-Lines: $14.50 "Goose Neck" Elbow for New Drop Tubes: $1.65 Drop Tubes: $3 Center Pivot Base Boot Gasket: $175

64

Results of the 1000 Hour Rotary Microfilter Endurance Test  

Stellite on Nitronic 60. 8 SRNL-L3100-2010-00229 Rotary Microfilter 1000 Hour Test Flux Data for 1000 Hour Test 0 1 2 3 4 5 6 0 100 200 300 400 500 ...

65

TESTING OF THE DUAL ROTARY FILTER SYSTEM  

SciTech Connect

The Savannah River National Laboratory (SRNL) installed and tested two hydraulically connected SpinTek rotary microfilter (RMF) units to determine the behavior of a multiple filter system. Both units were successfully controlled by a control scheme written in DELTA-V architecture by Savannah River Remediation (SRR) Process Control Engineering personnel. The control system was tuned to provide satisfactory response to changing conditions during the operation of the multi-filter system. Stability was maintained through the startup and shutdown of one of the filter units while the second was still in operation. The installation configuration originally proposed by the Small Colum Ion Exchange (SCIX) project of independent filter and motor mountings may be susceptible to vibration. Significant stiffening of the filter and motor mounts was required to minimize the vibration. Alignment of the motor to the filter was a challenge in this test configuration. The deployment configuration must be easy to manipulate and allow for fine adjustment. An analysis of the vibration signature of the test system identified critical speeds. Whether it corresponds to the resonance frequency of a rotor radial vibration mode that was excited by rotor unbalance is uncertain based upon the measurements. A relative motion series should be completed on the filter with the final shaft configuration to determine if the resonances exist in the final filter design. The instrumentation selected for deployment, including the concentrate discharge control valve and flow meters, performed well. Automation of the valve control integrated well with the control scheme and when used in concert with the other control variables, allowed automated control of the dual RMF system. The one area of concern with the instrumentation was the condition resulting when the filtrate flow meter operated with less than three gpm. This low flow was at the lower range of performance for the flow meter. This should not be an issue in deployment where the desired flow rate will be within the normal operating range of the meter. Testing demonstrated that the use of a flexible line for the filtrate discharge is highly desired at the outlet of the rotary union to transition to the system piping. Isolating the vibration from the rotary union will significantly improve the lifetime of the seals. Methods to monitor and isolate individual filters should be considered during deployment. The ability to diagnose issues and isolate individual filters would allow isolation prior to failure. Thus, filters may be cleaned or repaired instead of requiring complete replacement if the condition were to continue unnoticed. Isolating the filtrate line of each filter during startup will minimize the premature buildup of solids on the filter disks. Several tests have shown that the method of filter startup can improve performance lifetime of the filters. The installation must factor in an air inlet for the draining of a filter that does not involve a reverse flow through the filter disks. The reverse flow may cause deformation of the disks or may damage other components of the filters themselves.

Herman, D.; Fowley, M.; Stefanko, D.

2011-08-29T23:59:59.000Z

66

Application of Airborne Passive Microwave Observations for Monitoring Inland Flooding Caused by Tropical Cyclones  

Science Conference Proceedings (OSTI)

Inland flooding from tropical cyclones is a significant factor in storm-related deaths in the United States and other countries, with the majority of tropical cyclone fatalities recorded in the United States resulting from freshwater flooding. ...

Courtney D. Buckley; Robbie E. Hood; Frank J. LaFontaine

2009-10-01T23:59:59.000Z

67

Quantifying Surface Energy Fluxes in the Vicinity of Inland-Tracking Tropical Cyclones  

Science Conference Proceedings (OSTI)

Tropical cyclones (TCs) typically weaken or transition to extratropical cyclones after making landfall. However, there are cases of TCs maintaining warm-core structures and intensifying inland unexpectedly, referred to as TC maintenance or ...

Theresa K. Andersen; David E. Radcliffe; J. Marshall Shepherd

68

Coastal-inland solar radiation difference study. Final report  

DOE Green Energy (OSTI)

The purpose of this study was to quantify the characteristics of solar insolation in the coastal zone and to determine the effect of the sea breeze circulation on the global insolation. In order to satisfy these objectives, a six station sampling network was established in the coastal plain of southeastern North Carolina, where previous evidence has indicated that the sea breeze circulation is almost a daily occurrence from late May through October. Three sites (Sloop Point, Onslow Beach, and Cape Fear Technical Institute (CFTI)) were located near the coast (coastal sites) to assess the insolation at the coast. A site (Clinton) was located in an area seldom affected by the sea breeze (about 100 km from the coast). Two additional sites, Wallace and Ellis Airport, located between the coastal sites and the control site, were to be used to assess the transient impact of the sea breeze upon the insolation. Pyranometers were located at each site to measure the global insolation. Direct normal insolation measured by a pyrheliometer and ultraviolet radiation measured by uv radiometers were observed at the Sloop Point and Clinton sites only. Data were collected during the calendar year 1978. The results of the study indicated that the global insolation had greater variability over the network during the summer season (June, July, and August). During the summer, there was a systematicdiurnal variation of the difference in global insolation between the inland and the coastal sites.

Bach, W.D. Jr.; Vukovich, F.M.

1980-04-01T23:59:59.000Z

69

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Wednesday, 28 April 2010 00:00 Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

70

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Wednesday, 28 April 2010 00:00 Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

71

Microwave lamp with multi-purpose rotary motor  

DOE Patents (OSTI)

In a microwave powered electrodeless lamp, a single rotary motor is used to (a) rotate the bulb and (b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooler for providing cooling gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement. 8 figs.

Ury, M.G.; Turner, B.; Wooten, R.D.

1999-02-02T23:59:59.000Z

72

Microwave lamp with multi-purpose rotary motor  

DOE Patents (OSTI)

In a microwave powered electrodeless lamp, a single rotary motor is used to a) rotate the bulb and b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooling for providing cooler gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement.

Ury, Michael G. (Bethesda, MD); Turner, Brian (Myersville, MD); Wooten, Robert D. (Rockville, MD)

1999-01-01T23:59:59.000Z

73

Inland Northwest Regional High School Science Bowl | U.S. DOE Office of  

Office of Science (SC) Website

Inland Northwest Regional Inland Northwest Regional High School Science Bowl National Science Bowl® (NSB) NSB Home About High School High School Students High School Coaches High School Regionals High School Rules, Forms, and Resources Middle School Attending National Event Volunteers 2013 Competition Results News Media WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: 202-586-6702 E: National.Science.Bowl@science.doe.gov Washington Regions Inland Northwest Regional High School Science Bowl Print Text Size: A A A RSS Feeds FeedbackShare Page Regional Coordinator Information Name: Kaye Kamp Email: kkamp@whitworth.edu Regional Event Information Date: February 8, 2014 Maximum Number of Teams: 42

74

Inland Northwest Regional Middle School Science Bowl | U.S. DOE Office of  

Office of Science (SC) Website

Regions » Inland Northwest Regions » Inland Northwest Regional Middle School Science Bowl National Science Bowl® (NSB) NSB Home About High School Middle School Middle School Students Middle School Coaches Middle School Regionals Middle School Rules, Forms, and Resources Attending National Event Volunteers 2013 Competition Results News Media WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: 202-586-6702 E: National.Science.Bowl@science.doe.gov Washington Regions Inland Northwest Regional Middle School Science Bowl Print Text Size: A A A RSS Feeds FeedbackShare Page Regional Coordinator Information Name: Kaye Kamp Email: kkamp@whitworth.edu Regional Event Information Date: Saturday, March 1, 2014

75

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

76

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

77

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

78

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

79

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

80

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Micro rotary machine and methods for using same  

SciTech Connect

A micro rotary machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft comprises a horizontal shaft and is operable to be rotated by the micro actuator. A micro tool is coupled to the micro shaft and is operable to perform work in response to motion of the micro shaft.

Stalford, Harold L. (Norman, OK)

2012-04-17T23:59:59.000Z

82

Quantifying the impact of inland transport times on container fleet sizing in liner shipping services with uncertainties  

Science Conference Proceedings (OSTI)

Container fleet sizing is a key issue in liner shipping industry. Although container shipping is an intermodal transport system, inland container movements are often beyond the control of shipping lines. It is vital to understand how the inland transport ... Keywords: Container fleet sizing, Empty container repositioning, Genetic algorithms, Golden section, Intermodal, Simulated annealing, Stochastic

Jing-Xin Dong; Dong-Ping Song

2012-01-01T23:59:59.000Z

83

Inland Power and Light Company - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heating & Cooling Design & Remodeling Sealing Your Home Ventilation Heat Pumps Water Heating Windows, Doors, & Skylights Program Info State District of Columbia Program Type...

84

EVALUATION OF ALTERNATIVE FILTER MEDIA FOR THE ROTARY MICROFILTER  

SciTech Connect

SRS is currently developing and testing several processes to treat high level radioactive liquid waste. These processes include the Integrated Salt Disposition Process (ISDP), the Salt Waste Processing Facility (SWPF), and the Small Column Ion Exchange Process (SCIX). Each of these processes has a solid-liquid separation process that limits its throughput. SRNL researchers identified and tested the rotary microfilter as a technology to increase solid-liquid separation throughput. The testing showed significant improvement in filter flux with the rotary microfilter over the baseline crossflow filter (i.e., 2.5-6.5X during scoping tests, as much as 10X in actual waste tests, and approximately 3X in pilot-scale tests). SRNL received funding from DOE EM-21, and subsequently DOE EM-31 to develop the rotary microfilter for high level radioactive service. The work has included upgrading the rotary microfilter for radioactive service, testing with simulated SRS waste streams, and testing it with simulated Hanford waste streams. While the filtration rate is better than that obtained during testing of crossflow filters, the authors believe the rotary microfilter throughput can be improved by using a better filter membrane. The rotary microfilter membrane is made of stainless steel (Pall PMM050). Previous testing, funded by DOE EM-21, showed that asymmetric filters composed of a ceramic membrane on top of a stainless steel support produced higher filter flux than 100% stainless steel symmetric filters in crossflow filter tests. In that testing, the Pall Accusep and Graver filters produced 13-21% larger filter flux than the baseline 0.1 {micro}m Mott filter. While the improvement in flux is not as dramatic as the improvement of the rotary filter over a crossflow filter, a 13-21% increase could reduce the lifetime of a 30 year process by 4-6 years, with significant cost savings. Subsequent rotary filter testing showed the Pall PMM050 stainless steel filter membrane produced higher flux than the Mott filter media in bench-scale and pilot-scale testing. The Accusep and Graver filter media were not evaluated in that testing, because they are not available as flat sheets. The Accusep filter was developed at ORNL and licensed to Pall Corporation. This filter has a stainless steel support structure with a zirconium oxide ceramic membrane. The pore size is 0.1 {micro}m absolute. The Graver filter has a stainless steel support structure with a titanium dioxide ceramic membrane. The pore size is 0.07 {micro}m absolute. SRNL and ORNL are working together to develop filter media similar to the Accusep and Graver media, and to test them in a bench-scale filtration apparatus to attempt to improve the throughput of the rotary microfilter. This report describes the effort.

Poirier, M.; Herman, D.; Bhave, R.

2011-09-13T23:59:59.000Z

85

A Climatology of Inland Winds from Tropical Cyclones for the Eastern United States  

Science Conference Proceedings (OSTI)

Tropical cyclones pose a significant threat to life and property along coastal regions of the United States. As these systems move inland and dissipate, they can also pose a threat to life and property, through heavy rains, high winds, and other ...

Michael C. Kruk; Ethan J. Gibney; David H. Levinson; Michael Squires

2010-07-01T23:59:59.000Z

86

Solids transportation model of an industrial rotary dryer  

SciTech Connect

A complete simulation model has been developed for an industrial rotary dryer to account for the heat and mass exchange between the solids and the gas. This simulator is mainly composed of three models: solids transportation model, furnace model, and gas model. The solids transportation model is the modified Cholette-Cloutier model. It consists of a series of interactive reservoirs which are subdivided into an active and dead compartments to account for the characteristic extended tail of the residence time distribution (RTD) curves observed in industrial dryers. To expand the validity of the model, experiments have been performed in an industrial rotary dryer to obtain RTD curves under different mineral concentrate and gas flow rates. This paper describes these experiments and presents the variation of the average residence time and model parameters as function of solids and gas flow rates.

Renaud, M.; Thibault, J.; Trusiak, A.

2000-05-01T23:59:59.000Z

87

Skew and twist resistant hydrodynamic rotary shaft seal  

DOE Patents (OSTI)

A hydrodynamically lubricated squeeze packing type rotary shaft seal suitable for lubricant retention and environmental exclusion which incorporates one or more resilient protuberances which cooperate with the gland walls to hold the seal straight in its installation groove in unpressurized and low pressure lubricant retention applications thereby preventing skew-induced wear caused by impingement of abrasive contaminants present in the environment, and which also serve as radial bearings to prevent tipping of the seal within its installation gland. 14 figs.

Dietle, L.; Kalsi, M.S.

1999-02-23T23:59:59.000Z

88

Skew and twist resistant hydrodynamic rotary shaft seal  

DOE Patents (OSTI)

A hydrodynamically lubricated squeeze packing type rotary shaft seal suitable for lubricant retention and environmental exclusion which incorporates one or more resilient protuberances which and cooperate with the gland walls to hold the seal straight in its installation groove in unpressurized and low pressure lubricant retention applications thereby preventing skew-induced wear caused by impingement of abrasive contaminants present in the environment, and which also serve as radial bearings to prevent tipping of the seal within its installation gland.

Dietle, Lannie (Sugar Land, TX); Kalsi, Manmohan Singh (Houston, TX)

1999-01-01T23:59:59.000Z

89

Evaluation of Alternative Filter Media for the Rotary Microfilter  

SciTech Connect

The Savannah River Site is currently developing and testing several processes to treat high level radioactive liquid waste. Each of these processes has a solid-liquid separation process that limits its throughput. Savannah River National Laboratory researchers identified and tested the rotary microfilter as a technology to increase solid-liquid separation throughput. The authors believe the rotary microfilter throughput can be improved by using a better filter membrane. Previous testing showed that asymmetric filters composed of a ceramic membrane on top of a stainless steel support produced higher filter flux than 100% stainless steel symmetric filters in crossflow filter tests. Savannah River National Laboratory and Oak Ridge National Laboratory are working together to develop asymmetric ceramic ? stainless steel composite filters and asymmetric 100% stainless steel filters to improve the throughput of the rotary microfilter. The Oak Ridge National Laboratory Inorganic Membrane Group fabricated samples of alternative filter membranes. In addition, Savannah River National Laboratory obtained samples of filter membranes from Pall, Porvair, and SpinTek. They tested these samples in a static test cell with feed slurries containing monosodium titanate and simulated sludge.

Poirier, M. R.; Herman, D. T.; Bhave, R.

2011-11-09T23:59:59.000Z

90

Further Characterization of New NiTi Wire and Rotary Endodontic ...  

Science Conference Proceedings (OSTI)

Presentation Title, Further Characterization of New NiTi Wire and Rotary ... Higher-resolution transmission electron microscopy examination of M-Wire used to ...

91

Table 4.4 Crude Oil and Natural Gas Rotary Rigs in ...  

U.S. Energy Information Administration (EIA)

Table 4.4 Crude Oil and Natural Gas Rotary Rigs in Operation, 1949-2011 (Number of Rigs) Year: By Site : By Type: Total 1: Onshore

92

Remote Sensing for Water Quality Applications  

E-Print Network (OSTI)

Remote Sensing for Water Quality Applications #12;Objective Give a brief update on GEO Inland and Nearshore Coastal Water Quality Remote Sensing Workshop (GEO Work Task WA-06-01)) Held in Geneva and Nearshore Coastal Water Quality Remote Sensing Workshop (GEO Work Task WA-06-01)) Organizing committee

93

A rotary-airlock valve resists abrasive mixtures  

SciTech Connect

Hill and Griffith (H and G, Cincinnati, Ohio) is a leading supplier of custom-blended additives to founderies. Thousands of tons of clay and carbon blends such as bentonite, gilsonite and pulverized coal, pass through the company's rotary-airlock feeding system each month. H and G's original rotary valves had cylinders lined with chrome, and closed-end rotors with tips made from nickel-chromium alloys. These valves remained in service for a maximum of only three months each. During that time, the abrasive mixtures passing through the valves virtually eroded them, increasing tolerances and causing significant air leakage. The leaks caused the pneumatic line to plug up, reducing the velocity of the line below the minimum level needed to carry any material. To overcome the leakage, a second blower was added to the system. This unit supplied an additional 40 brake hp to the pneumatic-conveying line. With constant maintenance of the valve and the continuous operation of both blowers, H and G was able to extend the valve's life by nine months. After 20 years of trying valves with various configuration, H and G installed a Smoot Type 6 rotary-airlock valve in September of 1985. The new valve's internals were made from abrasion-resistant grades of NiHard and Stellite. This combination of alloys prolonged the active life of the valve by improving its abrasion resistance. During its first year, the Smoot valve did not break down, leak air or require use of the secondary blower. After its first year of service no wear was found on the valve's internal surfaces. Another mechanical analysis was performed in 1991, after five additional years of valve operation. The valve, which had now handled more than 250,000 tons of product, showed minimal wear. H and G's capital costs had been reduced from 25[cents]/ton to 3[cents]/ton by the new valve.

Not Available

1993-03-01T23:59:59.000Z

94

Research for the Crane Boom Length Coefficient Considering the Tower Head Flexibility in Rotary Plane  

Science Conference Proceedings (OSTI)

When the crane boom length in rotary plane is determined, the traditional methods only consider support condition, non-uniform, boom end lateral displacement constraint effect of amplitude dragline and hoist rope tensile forces. Ignoring tower head elastic ... Keywords: Equivalent elastic support method, Rotary plane, Tower head flexibility, Non-conservative loading, Length coefficient

Zhang Guangyun; Lan Peng; Lu Nianli

2011-01-01T23:59:59.000Z

95

Skew And Twist Resistant Hydrodynamic Rotary Shaft Seal  

SciTech Connect

A hydrodynamically lubricated squeeze packing type rotary shaft seal suitable for lubricant retention and environmental exclusion which incorporates one or more resilient protuberances which and cooperate with the gland walls to hold the seal straight in its installation groove in unpressurized and low pressure lubricant retention applications thereby preventing skew-induced wear caused by impingement of abrasive contaminants present in the environment, and which also serve as radial bearings to prevent tipping of the seal within its installation gland. Compared to prior art, this invention provides a dramatic reduction of seal and shaft wear in abrasive environments and provides a significant increase in seal life.

Dietle, Lannie (Sugar Land, TX); Kalsi, Manmohan Singh (Houston, TX)

2000-03-14T23:59:59.000Z

96

System and method for cooling a superconducting rotary machine  

Science Conference Proceedings (OSTI)

A system for cooling a superconducting rotary machine includes a plurality of sealed siphon tubes disposed in balanced locations around a rotor adjacent to a superconducting coil. Each of the sealed siphon tubes includes a tubular body and a heat transfer medium disposed in the tubular body that undergoes a phase change during operation of the machine to extract heat from the superconducting coil. A siphon heat exchanger is thermally coupled to the siphon tubes for extracting heat from the siphon tubes during operation of the machine.

Ackermann, Robert Adolf (Schenectady, NY); Laskaris, Evangelos Trifon (Schenectady, NY); Huang, Xianrui (Clifton Park, NY); Bray, James William (Niskayuna, NY)

2011-08-09T23:59:59.000Z

97

DEVELOPMENT OF A ROTARY MICROFILTER FOR RADIOACTIVE WASTE APPLICATIONS  

Science Conference Proceedings (OSTI)

The processing rate of Savannah River Site (SRS) high-level waste decontamination processes are limited by the flow rate of the solid-liquid separation. The baseline process, using a 0.1 micron cross-flow filter, produces {approx}0.02 gpm/sq. ft. of filtrate under expected operating conditions. Savannah River National Laboratory (SRNL) demonstrated significantly higher filter flux for actual waste samples using a small-scale rotary filter. With funding from the U. S. Department of Energy Office of Cleanup Technology, SRNL personnel are evaluating and developing the rotary microfilter for radioactive service at SRS. The authors improved the design for the disks and filter unit to make them suitable for high-level radioactive service. They procured two units using the new design, tested them with simulated SRS wastes, and evaluated the operation of the units. Work to date provides the following conclusions and program status: (1) The authors modified the design of the filter disks to remove epoxy and Ryton{reg_sign}. The new design includes welding both stainless steel and ceramic coated stainless steel filter media to a stainless steel support plate. The welded disks were tested in the full-scale unit. They showed good reliability and met filtrate quality requirements. (2) The authors modified the design of the unit, making installation and removal easier. The new design uses a modular, one-piece filter stack that is removed simply by disassembly of a flange on the upper (inlet) side of the filter housing. All seals and rotary unions are contained within the removable stack. (3) While it is extremely difficult to predict the life of the seal, the vendor representative indicates a minimum of one year in present service conditions is reasonable. Changing the seal face material from silicon-carbide to a graphite-impregnated silicon-carbide is expected to double the life of the seal. Replacement of the current seal with an air seal could increase the lifetime to 5 years and is undergoing testing in the current work. (4) The bottom bushing showed wear due to a misalignment during the manufacture of the filter tank. Replacing the graphite bushing with a more wear resistant material such as a carbide material will increase the lifetime of the bushing. This replacement requires a more wear resistant part or coating to prevent excessive wear of the shaft. The authors are currently conducting testing with the more wear resistant bushing. (5) The project team plans to use the rotary microfilter as a filter in advance of an ion exchange process under development for potential deployment in SRS waste tank risers.

Poirier, M; David Herman, D; Samuel Fink, S

2008-02-25T23:59:59.000Z

98

Comparison of residence time models for cascading rotary dryers  

SciTech Connect

The predictions of the models of Matchett and Baker (1988), Saeman and Mitchell (1954) and Friedman and Marshall (1949) for the solids residence time in rotary dryers have been compared with both pilot-scale and industrial-scale data. A countercurrent pilot-scale dryer of 0.2m diameter and 2m long has been used with air velocities up to 1.5 m to measure the residence times of sorghum grain. The average discrepancy for the solids residence time between the predictions and the experiments that were carried out in the pilot-scale rotary dryer is {minus}10.4%. Compared with the models of Friedman and Marshall (1949) and Saeman and Mitchell (1954) for the pilot-scale data obtained here, the Matchett and Baker model is more satisfactory for predicting the solids residence time in this pilot-scale dryer. It has also been found that the model of Matchett and Baker describes the industrial data of Saeman and Mitchell (1954) than the correlation of Friedman and Marshall (1949).

Cao, W.F.; Langrish, T.A.G. [Univ. of Sydney, New South Wales (Australia). Dept. of Chemical Engineering

1999-04-01T23:59:59.000Z

99

Wear compensating seal means for rotary piston coal feeder  

SciTech Connect

The present invention is directed to a wear compensating seal arrangement for use in a rotary piston feeder utilized for feeding pulverized coal into a gasifier operating at relatively high pressures and elevated temperatures. The rotary piston feeder has a circular casing with a coal loading opening therein diametrically opposed from a coal discharge and contains a rotatable disoidal rotor having a cylinder in which a reciprocatable piston is disposed. The reciprocation of the piston within the cylinder is provided by a stationary conjugate cam whereby pulverized coal from a coal hopper at atmospheric pressure can be introduced into the cylinder and then discharged therefrom into the high pressure gasifier while maintaining minimal losses of producer gas and the expenditure of minimal energy which would detract from the efficiency of the gasification. The seal arrangement of the present invention is disposed between the rotor and the casing about the coal discharge and prevents the high pressure gases from within the gasifier from escaping between these relatively movable parts during operation of the coal feeder. The seal utilizes a primary seal in contact with the rotor and a secondary seal supporting the primary seal. The primary seal is continuously urged towards the rotor by springs and the high pressure producer gas.

Gencsoy, Hasan T. (Morgantown, WV); Gardner, John F. (Morgantown, WV)

1979-01-01T23:59:59.000Z

100

Water quality modeling for the Kennet and Avon Canal, a navigational canal in an inland catchment  

E-Print Network (OSTI)

& Validation...........................................................141 7.2.1. Hydrology ................................................................................................141 7.2.2. Total Solids...

Zeckoski, Rebecca

2010-10-12T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Development of a Low-Cost Rotary Steerable Drilling System  

DOE Green Energy (OSTI)

The project had the goal to develop and commercialize a low-cost rotary steerable system (LCRSS) capable of operating downhole at conventional pressures and temperatures to reduce operating costs by a minimum of 50% and lost-in-hole charges by at least 50% over the currently offered systems. The LCRSS system developed under this project does reduce operating costs by 55% and lost-in-hole charges by at least 50%. The developed product is not commercializable in its current form. The overall objective was to develop and commercialize a low cost rotary steerable system (LCRSS) capable of operating downhole at conventional pressures and temperatures (20,000 psi/150 C) while reducing the operating costs by 50% and the lost-in-hole charges by 50% over the currently available systems. The proposed reduction in costs were to be realized through the significant reduction in tool complexity, a corresponding increase in tool reliability as expressed in the mean-time between failure (MTBF), and a reduction in the time and costs required to service tools after each field operation. Ultimately, the LCRSS system was to be capable of drilling 7 7/8 in. to 9 5/8 in. borehole diameters. The project was divided into three Phases, of which Phases I & II were previously completed and reported on, and are part of the case file. Therefore, the previously reported information is not repeated herein. Phase III included the fabrication of two field ready prototypes that were to be subjected to a series of drilling tests at GTI Catoosa, DOE RMOTC, and at customer partnering wells, if possible, as appropriate in the timing of the field test objectives to fully exercise all elements of the LCRSS. These tests were conducted in an iterative process based on a performance/reliability improvement cycle with the goal of demonstrating the system met all aspects required for commercial viability. These tests were conducted to achieve continuous runs of 100+ hours with well trajectories that fully exercised the tool's build/turn/drop/hold target capabilities and its higher end ratings for bit weight, torque and rotary speed. The tool teardowns were rigorously analyzed at the conclusion of each field run to assess component wear rates and to fully document any detrimental behavior(s) observed.

Roney Nazarian

2012-01-31T23:59:59.000Z

102

The CI-FLOW Project: A System for Total Water Level Prediction from the Summit to the Sea  

Science Conference Proceedings (OSTI)

The objective of the Coastal and Inland Flooding Observation and Warning (CI-FLOW) project is to prototype new hydrometeorologic techniques to address a critical NOAA service gap: routine total water level predictions for tidally influenced watersheds. ...

Suzanne Van Cooten; Kevin E. Kelleher; Kenneth Howard; Jian Zhang; Jonathan J. Gourley; John S. Kain; Kodi Nemunaitis-Monroe; Zac Flamig; Heather Moser; Ami Arthur; Carrie Langston; Randall Kolar; Yang Hong; Kendra Dresback; Evan Tromble; Humberto Vergara; Richard A Luettich Jr.; Brian Blanton; Howard Lander; Ken Galluppi; Jessica Proud Losego; Cheryl Ann Blain; Jack Thigpen; Katie Mosher; Darin Figurskey; Michael Moneypenny; Jonathan Blaes; Jeff Orrock; Rich Bandy; Carin Goodall; John G. W. Kelley; Jason Greenlaw; Micah Wengren; Dave Eslinger; Jeff Payne; Geno Olmi; John Feldt; John Schmidt; Todd Hamill; Robert Bacon; Robert Stickney; Lundie Spence

2011-11-01T23:59:59.000Z

103

High pressure rotary piston coal feeder for coal gasification applications  

DOE Patents (OSTI)

The subject development is directed to an apparatus for feeding pulverized coal into a coal gasifier operating at relatively high pressures and elevated temperatures. This apparatus is a rotary piston feeder which comprises a circular casing having a coal loading opening therein diametrically opposed from a coal discharge and contains a rotatable discoid rotor having a cylinder in which a reciprocateable piston is disposed. The reciprocation of the piston within the cylinder is provided by a stationary conjugate cam arrangement whereby the pulverized coal from a coal hopper at atmospheric pressure can be introduced into the cylinder cavity and then discharged therefrom into the high-pressure gasifier without the loss of high pressure gases from within the latter.

Gencsoy, Hasan T. (Morgantown, WV)

1977-05-24T23:59:59.000Z

104

Rim for rotary inertial energy storage device and method  

DOE Patents (OSTI)

The present invention is directed to an improved rim or a high-performance rotary inertial energy storage device (flywheel). The improved rim is fabricated from resin impregnated filamentary material which is circumferentially wound in a side-by-side relationship to form a plurality of discretely and sequentially formed concentric layers of filamentary material that are bound together in a resin matrix. The improved rim is provided by prestressing the filamentary material in each successive layer to a prescribed tension loading in accordance with a predetermined schedule during the winding thereof and then curing the resin in each layer prior to forming the next layer for providing a prestress distribution within the rim to effect a self-equilibrating compressive prestress within the windings which counterbalances the transverse or radial tensile stresses generated during rotation of the rim for inhibiting deleterious delamination problems.

Knight, Jr., Charles E. (Knoxville, TN); Pollard, Roy E. (Powell, TN)

1980-01-01T23:59:59.000Z

105

U.S. Offshore Crude Oil and Natural Gas Rotary Rigs in Operation ...  

U.S. Energy Information Administration (EIA)

U.S. Offshore Crude Oil and Natural Gas Rotary Rigs in Operation (Number of Elements) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec; 1973: 99: 89: 90: 79: 72 ...

106

Modeling and simulation of two-leaf semi-rotary VAWT  

Science Conference Proceedings (OSTI)

In this paper, according to the structural characteristics of two-leaf semi-rotary VAWT (vertical axis wind turbine), the microelement method and the coordinate system rotation method are used to establish the mathematical model of wind turbine and, ...

Qian Zhang; Haifeng Chen; Binbin Wang

2010-09-01T23:59:59.000Z

107

Bias in hard disk drive rotary actuator pivot bearings: measurements and lubrication phenomena  

Science Conference Proceedings (OSTI)

Bias in disk drive rotary actuator bearings exhibits complex behavior related to the history of the actuator movement. This paper investigates the hysteresis component of bias present after seeks. Measurements of bias during full stroke actuator movements ...

Daniel Helmick; William Messner; C. Fred Higgs, III

2007-04-01T23:59:59.000Z

108

Generation of Optimal Unit Distance Codes for Rotary Encoders through Simulated Evolution  

Science Conference Proceedings (OSTI)

An evolutionary algorithm is used to generate unit distance codes for absolute rotary encoders. The target is to obtain a code suitable for disk size reduction, or for resolution increase, thus overcoming the limitations of conventional Gray codes. Obtained ...

Stefano Gregori; Roberto Rossi; Guido Torelli; Valentino Liberali

2001-04-01T23:59:59.000Z

109

U.S. Offshore Crude Oil and Natural Gas Rotary Rigs in Operation ...  

U.S. Energy Information Administration (EIA)

U.S. Offshore Crude Oil and Natural Gas Rotary Rigs in Operation (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 ...

110

GA 200-500 (VSD): Oil-injected rotary screw compressors, 200 ...  

U.S. Energy Information Administration (EIA)

GA 200-500 (VSD): Oil-injected rotary screw compressors, 200-500 kW / 268-670 hp.,Kunshan CompAirs Machinery Plant Co.,Ltd is the leading air ...

111

GA 30+-90 / GA 37-90 VSD: Oil-injected rotary screw ...  

U.S. Energy Information Administration (EIA)

GA 30+-90 / GA 37-90 VSD: Oil-injected rotary screw compressors, 30-90 kW / 40-125 hp,Kunshan CompAirs Machinery Plant Co.,Ltd is the leading air ...

112

GAe11-30 / GAe 18-30 VSD: Oil-injected rotary screw ...  

U.S. Energy Information Administration (EIA)

GAe11-30 / GAe 18-30 VSD: Oil-injected rotary screw compressors, 11-30 kW / 15-40 hp,Kunshan CompAirs Machinery Plant Co.,Ltd is the leading air ...

113

GA 11+-30/GA 15-30 VSD: Oil-injected rotary screw compressors ...  

U.S. Energy Information Administration (EIA)

GA 11+-30/GA 15-30 VSD: Oil-injected rotary screw compressors, 11-30 kW / 15-40 hp,Kunshan CompAirs Machinery Plant Co.,Ltd is the leading air ...

114

GA 90+-160+ / GA 110-160 VSD: Oil-injected rotary screw ...  

U.S. Energy Information Administration (EIA)

GA 90+-160+ / GA 110-160 VSD: Oil-injected rotary screw compressors, 90-160 kW / 125-200 hp.,Kunshan CompAirs Machinery Plant Co.,Ltd is the leading ...

115

U.S. Crude Oil and Natural Gas Rotary Rigs in Operation (Number of ...  

U.S. Energy Information Administration (EIA)

U.S. Crude Oil and Natural Gas Rotary Rigs in Operation (Number of Elements) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec; 1973: 1,219: 1,126: 1,049: 993 ...

116

Granular Attrition due to Rotary Valve in a Pneumatic Conveying System  

E-Print Network (OSTI)

The rotary valve is a widely used mechanical device in many solids-handling industrial processes. However, it may also be responsible for most of the attrition effects occurring in a typical process. In this study, the ...

Yao, Jun

117

Water  

NLE Websites -- All DOE Office Websites (Extended Search)

Laws Envirosearch Institutional Controls NEPA Activities RCRA RQ*Calculator Water HSS Logo Water Laws Overview of water-related legislation affecting DOE sites Clean...

118

Barges haul LP-gas on inland waterways and the deep-blue sea  

SciTech Connect

Warren Petroleum Co. (Tulsa) owns 23 LP-gas barges and leases another eight to 10, depending on need, for transporting product from Mont Belvieu to terminals on the inland waterways and east to Florida and down into the Caribbean. One of these barges is the Sioux, recently completed by Fredeman Shipyard, located at Carlyss, La. Upon delivery to the owner, M and W Barge Co. of Belle Chasse, La., the barge went on charter to Warren Petroleum. Built under the supervision of project manager Terry T. Frickey, the barge took nine months to complete and provided 20 new jobs at the shipyard. The company is currently negotiating for a similar barge-construction contract.

Not Available

1988-03-01T23:59:59.000Z

119

Hydrodynamically Lubricated Rotary Shaft Having Twist Resistant Geometry  

SciTech Connect

A hydrodynamically lubricated squeeze packing type rotary shaft with a cross-sectional geometry suitable for pressurized lubricant retention is provided which, in the preferred embodiment, incorporates a protuberant static sealing interface that, compared to prior art, dramatically improves the exclusionary action of the dynamic sealing interface in low pressure and unpressurized applications by achieving symmetrical deformation of the seal at the static and dynamic sealing interfaces. In abrasive environments, the improved exclusionary action results in a dramatic reduction of seal and shaft wear, compared to prior art, and provides a significant increase in seal life. The invention also increases seal life by making higher levels of initial compression possible, compared to prior art, without compromising hydrodynamic lubrication; this added compression makes the seal more tolerant of compression set, abrasive wear, mechanical misalignment, dynamic runout, and manufacturing tolerances, and also makes hydrodynamic seals with smaller cross-sections more practical. In alternate embodiments, the benefits enumerated above are achieved by cooperative configurations of the seal and the gland which achieve symmetrical deformation of the seal at the static and dynamic sealing interfaces. The seal may also be configured such that predetermined radial compression deforms it to a desired operative configuration, even through symmetrical deformation is lacking.

Dietle, Lannie (Houston, TX); Gobeli, Jeffrey D. (Houston, TX)

1993-07-27T23:59:59.000Z

120

Sway control method and system for rotary cranes  

DOE Patents (OSTI)

Methods and apparatuses for reducing the oscillatory motion of rotary crane payloads during operator-commanded or computer-controlled maneuvers. An Input-shaping filter receives input signals from multiple operator input devices and converts them into output signals readable by the crane controller to dampen the payload tangential and radial sway associated with rotation of the jib. The input signals are characterized by a hub rotation trajectory .gamma.(t), which includes a jib angular acceleration .gamma., a trolley acceleration x, and a load-line length velocity L. The system state variables are characterized by a tangential rotation angle .theta.(t) and a radial rotation angle .phi.(t) of the load-line. The coupled equations of motion governing the filter are non-linear and configuration-dependent. In one embodiment, a filter is provided between the operator and the crane for filtering undesired frequencies from the angular .gamma. and trolley x velocities to suppress payload oscillation. In another embodiment, crane commands are computer generated and controlled to suppress vibration of the payload using a postulated asymmetrical shape for the acceleration profiles of the jib, which profiles are uniquely determined by a set of parameters (including the acceleration pulse amplitude and the duration and coast time between pulses), or a dynamic programming approach.

Robinett, Rush D. (Tijeras, NM); Parker, Gordon G. (Houghton, MI); Feddema, John T. (Albuquerque, NM); Dohrmann, Clark R. (Albuquerque, NM); Petterson, Ben J. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Coal desulfurization in a rotary kiln combustor. Final report, March 15, 1990--July 31, 1991  

Science Conference Proceedings (OSTI)

The purpose of this project was to demonstrate the combustion of coal and coal wastes in a rotary kiln reactor with limestone addition for sulfur control. The rationale for the project was the perception that rotary systems could bring several advantages to combustion of these fuels, and may thus offer an alternative to fluid-bed boilers. Towards this end, an existing wood pyrolysis kiln (the Humphrey Charcoal kiln) was to be suitably refurbished and retrofitted with a specially designed version of a patented air distributor provided by Universal Energy, Inc. (UEI). As the project progressed beyond the initial stages, a number of issues were raised regarding the feasibility and the possible advantages of burning coals in a rotary kiln combustor and, in particular, the suitability of the Humphrey Charcoal kiln as a combustor. Instead, an opportunity arose to conduct combustion tests in the PEDCO Rotary Cascading-Bed Boiler (RCBB) commercial demonstration unit at the North American Rayon CO. (NARCO) in Elizabethton, TN. The tests focused on anthracite culm and had two objectives: (a) determine the feasibility of burning anthracite culms in a rotary kiln boiler and (b) obtain input for any further work involving the Humphrey Charcoal kiln combustor. A number of tests were conducted at the PEDCO unit. The last one was conducted on anthracite culm procured directly from the feed bin of a commercial circulating fluid-bed boiler. The results were disappointing; it was difficult to maintain sustained combustion even when large quantities of supplemental fuel were used. Combustion efficiency was poor, around 60 percent. The results suggest that the rotary kiln boiler, as designed, is ill-suited with respect to low-grade, hard to burn solid fuels, such as anthracite culm. Indeed, data from combustion of bituminous coal in the PEDCO unit suggest that with respect to coal in general, the rotary kiln boiler appears inferior to the circulating fluid bed boiler.

Cobb, J.T. Jr.

1992-09-11T23:59:59.000Z

122

Rotary seal with enhanced lubrication and contaminant flushing  

DOE Patents (OSTI)

A resilient, ring shaped interference-type hydrodynamic rotary seal having waves on the lubricant side which provide increased film thickness and flushing action by creating contact pressure induced angulated restrictions formed by abrupt restrictive diverters. The angulated restrictions are defined by projecting ridges, corners at the trailing edge of the waves, or simply by use of a converging shape at the trailing edge of the waves which is more abrupt than the gently converging hydrodynamic inlet shape at the leading edge of the waves. The abrupt restrictive diverter performs two functions; a restricting function and a diverting function. The angulated restrictions cause a local film thickness restriction which produces a damming effect preventing a portion of the lubricant from leaking out of the dynamic sealing interface at the trailing edge of the wave, and results in a much thicker lubricant film thickness under the waves. This contributes to more film thickness in the remainder of the dynamic sealing interface toward the environment because film thickness tends to decay gradually rather than abruptly due to the relative stiffness of the seal material. Because of the angle of the abrupt restrictive diverter relative to the relative rotation direction, in conjunction with the restriction or damming effect, a strong diverting action is produced which pumps lubricant across the dynamic sealing interface toward the environment. The lubricant diversion is caused by the component of the rotational velocity tangent to the abrupt restrictive diverter. The component of rotational velocity normal to the abrupt restrictive diverter causes a portion of the lubricant film to be pumped past the abrupt restrictive diverter, thereby assuring adequate lubrication thereof.

Dietle, Lannie L. (Sugar Land, TX)

2000-01-01T23:59:59.000Z

123

A Decision Support System for irrigation water allocation along the middle reaches of the Heihe River Basin, Northwest China  

Science Conference Proceedings (OSTI)

To improve the water resource management of the inland river basins of northwestern China, a Decision Support System (DSS) is developed to provide an operative computer platform for decision makers. The DSS is designed according to actual water resource ... Keywords: Decision Support System, GIS, Irrigation management, Irrigation water allocation, Water resource management

Yingchun Ge, Xin Li, Chunlin Huang, Zhuotong Nan

2013-09-01T23:59:59.000Z

124

Seasonal Changes in a Vertical Thermal Structure Producing Stable Lower-Troposphere Layers over the Inland Region of the Indochina Peninsula  

Science Conference Proceedings (OSTI)

The authors performed a thermal budget analysis to understand the nature of seasonal changes in stable lower-troposphere layers over the inland region of the Indochina Peninsula, using atmospheric reanalysis data. The analysis focuses on ...

Masato I. Nodzu; Shin-Ya Ogino; Manabu D. Yamanaka

2011-07-01T23:59:59.000Z

125

ROTARY FILTER FINES TESTING FOR SMALL COLUMN ION EXCHANGE  

SciTech Connect

SRNL was requested to quantify the amount of 'fines passage' through the 0.5 micron membranes currently used for the rotary microfilter (RMF). Testing was also completed to determine if there is any additional benefit to utilizing a 0.1 micron filter to reduce the amount of fines that could pass through the filter. Quantifying of the amount of fines that passed through the two sets of membranes that were tested was accomplished by analyzing the filtrate by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) for titanium. Even with preparations to isolate the titanium, all samples returned results of less than the instrument's detection limit of 0.184 mg/L. Test results show that the 0.5 micron filters produced a significantly higher flux while showing a negligible difference in filtrate clarity measured by turbidity. The first targeted deployment of the RMF is with the Small Column Ion Exchange (SCIX) at the Savannah River Site (SRS). SCIX uses crystalline silicotitanate (CST) to sorb cesium to decontaminate a clarified salt solution. The passage of fine particles through the filter membranes in sufficient quantities has the potential to impact the downstream facilities. To determine the amount of fines passage, a contract was established with SpinTek Filtration to operate a 3-disk pilot scale unit with prototypic filter disk and various feeds and two different filter disk membranes. SpinTek evaluated a set of the baseline 0.5 micron filter disks as well as a set of 0.1 micron filter disks to determine the amount of fine particles that would pass the membrane and to determine the flux each set produced. The membrane on both disk sets is manufactured by the Pall Corporation (PMM 050). Each set of disks was run with three feed combinations: prototypically ground CST, CST plus monosodium titanate (MST), and CST, MST, plus Sludge Batch 6 (SB6) simulant. Throughout the testing, samples of the filtrate were collected, measured for turbidity, and sent back to SRNL for analysis to quantify the amount of fines that passed through the membrane. It should be noted that even though ground CST was tested, it will be transferred to the Defense Waste Processing Facility (DWPF) feed tank and is not expected to require filtration.

Herman, D.

2011-08-03T23:59:59.000Z

126

Burning state recognition of rotary kiln using ELMs with heterogeneous features  

Science Conference Proceedings (OSTI)

Image based burning state recognition plays an important role in sintering process control of rotary kiln. Although many efforts on dealing with this problem have been made over the past years, the recognition performance cannot be satisfactory due to ... Keywords: Burning state, ELM, Eigen-flame image, Latent semantic analysis, Multivariate image analysis

Weitao Li; Dianhui Wang; Tianyou Chai

2013-02-01T23:59:59.000Z

127

Radioactive air emissions program notice of construction, rotary mode core-sampling truck and exhauster  

SciTech Connect

Efforts have been ongoing to obtain core samples from the contents of each of the Hanford Site`s 149 single-shell tanks (SSTs). The SSTs contain various amounts and combinations of liquid, sludge, and saltcake. Existing sampling equipment is unable to retrieve samples of hardened waste within established tank safety restrictions (particularly limits on temperature). A new rotary mode core-sampling system has been designed to sample tanks containing hardened wastes. The prominent feature of this new system is the use of a nitrogen gas purge. The nitrogen gas purge will cool the drill bit and prevent cross contamination of different waste layers in the tank. The nitrogen gas purge will also allow more complete sample recovery, by clearing cuttings that might otherwise obstruct the sampler or drill bit. Nitrogen was chosen over other compressed gases for its inherent safety. Many of the tanks to be sampled with the rotary mode core-sampling system are not actively ventilated, these tanks are operated at atmospheric pressure with passive (breather) high-efficiency particulate air (HEPA) filters. Unless a ventilation system of the proper capacity is used, addition of the nitrogen purge gas to SSTs will cause the tanks to pressurize. Additionally, the use of the rotary mode core-sampling system will generate aerosols and dusts potentially containing radioactive particles in the tank vapor space. Consequently, an exhauster will be required during operation of the rotary mode core-sampling system on SSTs to prevent tank pressurization and to control emissions. This exhauster will be required to be moved from tank farm to tank farm with the rotary mode core-sampling system.

Not Available

1993-05-01T23:59:59.000Z

128

Water, Land and People  

NLE Websites -- All DOE Office Websites (Extended Search)

Water, Land and People Water, Land and People Nature Bulletin No. 251 January 8, 1983 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation WATER, LAND AND PEOPLE "Water, Land and People" is the title of a book which, like "Road to Survival", should be read by every American. Water, and its uses or control, has become a vital national problem. Some places, some years, we have too much of it and suffer disastrous floods. Elsewhere we have too little. In cities like New York and Los Angeles -- even in many inland towns -- and in the western lands which depend upon irrigation, the demand far exceeds the supply. Our Congress is beseeched for huge appropriations to provide flood control, navigation, electric power and irrigation.

129

An Analysis of Potential Stream Fish and Fish Habitat Monitoring Procedures for the Inland Northwest: Annual Report 1999.  

SciTech Connect

Recent concerns over the rapid declines of native stream-fish populations in the inland Northwest have prompted the USDA Forest Service to institute interim land management practices intended to stop further declines in fish habitat quality and protect existing high quality habitat. Natural resource managers in the Inland Northwest need tools for assessing the success or failure of conservation policies and the impacts of management actions on fish and fish habitats. Effectiveness monitoring is one such potential tool, but there are currently no established monitoring protocols. Since 1991, US Forest Service biologists have used the standardized R1/R4 inventory procedures to measure fish and fish habitats on agency lands throughout the Intermountain West. The widespread use and acceptance of these standardized procedures and the large amount of data collected suggest that the R1/R4 procedures might provide the basis for an effectiveness monitoring protocol. Using fish and fish habitat data collected by Forest Service biologists, the authors assessed the efficiency of the R1/R4 procedures for monitoring stream fish and fish habitats.

Peterson, James T.; Wollrab, Sherry P.

1999-09-01T23:59:59.000Z

130

Internal combustion engine with rotary valve assembly having variable intake valve timing  

DOE Patents (OSTI)

An internal combustion engine has rotary valves associated with movable shutters operable to vary the closing of intake air/fuel port sections to obtain peak volumetric efficiency over the entire range of speed of the engine. The shutters are moved automatically by a control mechanism that is responsive to the RPM of the engine. A foot-operated lever associated with the control mechanism is also used to move the shutters between their open and closed positions.

Hansen, Craig N. (Eden Prairie, MN); Cross, Paul C. (Shorewood, MN)

1995-01-01T23:59:59.000Z

131

Mathematical model and the dynamic simulation of an electromechanical rotary device. [SLENOID  

SciTech Connect

A mathematical model of an electro-mechanical rotary device is presented. This device contains a rotor, stator, and two spring-loaded arms which restrict the rotor motion. The desired action is the alignment of the rotor and the consequent movement of the arms. The SLENOID computer program for calculating the magnetic torque, air gap permeance, spring torque, damping effects, and motion of the rotor and arms is described. (LCL)

Emergy, J.D.

1980-02-01T23:59:59.000Z

132

Comparative analysis of core drilling and rotary drilling in volcanic terrane  

DOE Green Energy (OSTI)

Initially, the goal of this report is to compare and contrast penetration rates of rotary-mud drilling and core drilling in young volcanic terranes. It is widely recognized that areas containing an abundance of recent volcanic rocks are excellent targets for geothermal resources. Exploration programs depend heavily upon reliable subsurface information, because surface geophysical methods may be ineffective, inconclusive, or both. Past exploration drilling programs have mainly relied upon rotary-mud rigs for virtually all drilling activity. Core-drilling became popular several years ago, because it could deal effectively with two major problems encountered in young volcanic terranes: very hard, abrasive rock and extreme difficulty in controlling loss of circulation. In addition to overcoming these difficulties, core-drilling produced subsurface samples (core) that defined lithostratigraphy, structure and fractures far better than drill-chips. It seemed that the only negative aspect of core drilling was cost. The cost-per-foot may be two to three times higher than an ''initial quote'' for rotary drilling. In addition, penetration rates for comparable rock-types are often much lower for coring operations. This report also seeks to identify the extent of wireline core drilling (core-drilling using wireline retrieval) as a geothermal exploration tool. 25 refs., 21 figs., 13 tabs.

Flynn, T.; Trexler, D.T.; Wallace, R.H. Jr. (ed.)

1987-04-01T23:59:59.000Z

133

Modeling of the solids transportation within an industrial rotary dryer: A simple model  

SciTech Connect

To better understand the underlying phenomena taking place in an industrial rotary dryer and to determine the optimum operating conditions, a simulator in which the solids transportation, the gas flow, and the heat and mass transfer are modeled is currently being developed. This paper describes the use of interactive perfect mixers in series to model the solids transportation within an industrial rotary dryer, on the basis of an experimental residence time distribution curve (RTD). Two simple models are proposed: a series of perfect well-mixed interacting tanks and a modified Cholette-Cloutier model. The first model is not able to account for the nonideal behavior of the solids transportation in the rotary dryer. To account for the characteristic extended tail of the RTD curves observed in industrial dryers, in a second model, the solid phase is divided between an active and a dead zone. This model, with 36 cells and 25% of the volume occupied by the dead zones, modeled very well the industrial RTD curve. In addition, the model produces bed depth and axial velocity profiles that are consistent with those reported in the literature.

Duchesne, C.; Thibault, J.; Bazin, C. [Laval Univ., Sainte-Foy, Quebec (Canada)] [Laval Univ., Sainte-Foy, Quebec (Canada)

1996-07-01T23:59:59.000Z

134

EVALUATION OF AP-FARM SIMULANT COMPOSITION FOR ROTARY MICROFILTER TESTING  

SciTech Connect

This document identifies the feed composition of a Hanford AP tank farm simulant for rotary microfiltration testing. The composition is based on an Hanford Tank Waste Operations Simulator (HTWOS) model run in combination with Tank Waste Information Network (TWINS) data and mineralogical studies of actual waste solids. The feed simulant is intended to be used in test runs at SRNL. The simulant will be prepared in two parts: (1) A supernate, composed of water-soluble salts and (2) The undissolved (actually, undissolvable) solids. Test slurries with distinct solids concentrations (e.g., 0.5, 5 and 10 wt%) are then prepared as needed. The base for the composition of supernate and solids is the modeled feed sequence for a deployment scenario of the Supplemental Pretreatment units within AP-farm. These units comprise a filtration part, the RMF, and a Cesium-removal part, a Small Column Ion Exchange. The primary use of this simulant is for filtration testing - however, in case that it is also used for ion-exchange tests, the amount of Cs-137 that would need to be added is available in Table 1 and Attachment 3. A modified model run (MMR-049) of the Hanford Tank Waste Operations Simulator (HTWOS) system plan 6 case 3 was performed to identify the feed sequence. Case 3 assumed supplemental treatment besides the low activity waste (LAW) melter with supplemental pretreatment supporting the pretreatment facility. The MMR did not cap the duration of supplemental pretreatment to 15 months, but rather used it throughout the entire treatment mission as an add-on option to the pretreatment facility at the Waste Treatment and Immobilization Plant (WTP). Tank 241-AP-105 (AP-105) was chosen as the feed tank to the filtration unit. Other parameters included a fixed minimum of 0.5 wt% solids in the feed and a maximum Na-concentration of 5M in the supernate. The solids rejection from the filtration unit was set to 99.99% and the maximum allowed amount of solids within tank AP-105 was set to 10 wt%. A comprehensive description of the run and the full suite of results were issued as SVF-2364-00. The list of individual feed events including the amounts of liquid and solids transferred for the first five years is added as Attachment 2; the chemical composition of the supernate feed comprises Attachment 3. For the simulant composition, only the first five years of proposed feed delivery were taken into account. The main outcome of MMR-049 was that for the first five years, the feed would come mostly from AP-farms. Multiple delivery campaigns to AP-105 are included in this average feed, while minimizing the amount of contributing tanks to the solids in the feed mix.

HUBER HJ

2011-09-19T23:59:59.000Z

135

Integrated Status and Effectiveness Monitoring Program - Entiat River Snorkel Surveys and Rotary Screw Trap, 2007.  

DOE Green Energy (OSTI)

The USFWS Mid-Columbia River Fishery Resource Office conducted snorkel surveys at 24 sites during the summer and fall periods of 2006 survey periods as part of the Integrated Status and Effectiveness Monitoring Program in the Entiat River. A total of 37,938 fish from 15 species/genera and an unknown category were enumerated. Chinook salmon were the overall most common fish observed and comprised 15% of fish enumerated followed by rainbow trout (10%) and mountain whitefish (7%). Day surveys were conducted during the summer period 2007 (August), while night surveys were conducted during the fall 2007 (October) surveys. The USFWS Mid-Columbia River Fishery Resource Office (MCFRO) operated two rotary screw traps on the Entiat River as part of the Integrated Status and Effectiveness Monitoring Program (ISEMP) program from August through November of 2007. Along with the smolt traps, juvenile emigrants were also captured at remote locations throughout the Entiat watershed and its major tributary, the Mad River. A total of 999 wild Oncorhynchus mykiss and 5,107 wild run O. tshawytscha were PIT tagged during the study period. Rotary screw trap efficiencies averaged 22.3% for juvenile O. tshawytscha and 9.0% for juvenile O. mykiss. Rotary screw traps operated 7 days a week and remote capture operations were conducted when flow and temperature regimes permitted. This is third annual progress report to Bonneville Power Administration for the snorkel surveys conducted in the Entiat River as related to long-term effectiveness monitoring of restoration programs in this watershed. The objective of this study is to monitor the fish habitat utilization of planned in-stream restoration efforts in the Entiat River by conducting pre- and post-construction snorkel surveys at selected treatment and control sites.

Nelle, R.D.

2008-01-01T23:59:59.000Z

136

Experimental studies of heat and mass exchange in parallel-passage rotary desiccant dehumidifiers for solar cooling applications  

DOE Green Energy (OSTI)

This report presents results of work done to experimentally characterize the performance of rotary desiccant dehumidifiers and to develop and validate analytical methods for evaluating their performance in air-conditioning systems. A facility, the Cyclic Test Facility, and a test-and-analysis procedure were developed to evaluate the performance of the rotary dehumidifiers. Experiments were performed to develop a basic understanding of the simultaneous heat- and mass-transfer processes in the dehumidifiers. Two test articles were tested under cyclic operation to characterize their performance. Detailed accounts of the Cyclic Test Facility, its hardware and instrumentation, the two test articles, and data reduction and analysis methods are provided. The data provide an engineering data base for evaluating rotary desiccant dehumidifiers for cooling applications. 46 refs., 26 figs., 3 tabs.

Bharathan, D.; Parsons, J.M.; Maclaine-cross, I.L.

1987-11-01T23:59:59.000Z

137

Obtaining pressures in the 10?5 Pa range with oil?sealed rotary vacuum pumps  

Science Conference Proceedings (OSTI)

Trapped oil?sealed rotary pumps are usually considered capable of ultimate pressures no lower than about 10?3 Pa. Experiments are described which confirm that most of this residual gas originates from air dissolved in the pump oil. Replacement of the air with a less soluble gas (helium) or an easily trapped gas (carbon dioxide) is shown to give a useful reduction in ultimate pressure and to reduce the oxygen partial pressure to essentially zero. Operation with completely degassed oil is shown to give ultimate pressures in the 10?5 Pa range. The design of pumps based on these principles is discussed.

B. R. F. Kendall

1982-01-01T23:59:59.000Z

138

On the use of the parabolic concentration profile assumption for a rotary desiccant dehumidifier  

SciTech Connect

The current work describes a model for a desiccant dehumidifier which uses a parabolic concentration profile assumption to model the diffusion resistance inside the desiccant particle. The relative merits of the parabolic concentration profile model compared with widely utilized rotary desiccant wheel models are discussed. The periodic steady-state parabolic concentration profile model developed is efficient and can accommodate a variety of materials. These features make it an excellent tool for design studies requiring repetitive desiccant wheel simulations. A quartic concentration profile assumption was also investigated which yielded a 2.8 percent average improvement in prediction error over the parabolic model.

Chant, E.E. [Univ. of Turabo, Gurabo (Puerto Rico); Jeter, S.M. [Georgia Inst. of Technology, Atlanta, GA (United States). George W. Woodruff School of Mechanical Engineering

1995-02-01T23:59:59.000Z

139

Local entropy generation analysis of a rotary magnetic heat pump regenerator  

SciTech Connect

The rotary magnetic heat pump has attractive thermodynamic performance but it is strongly influenced by the effectiveness of the regenerator. This study uses local entropy generation analysis to evaluate the regenerator design and to suggest design improvements. The results show that performance of the proposed design is dominated by heat transfer related entropy generation. This suggests that enhancement concepts that improve heat transfer should be considered, even if the enhancement causes a significant increase in viscous losses (pressure drop). One enhancement technique, the use of flow disrupters, was evaluated and the results showed that flow disrupters can significantly reduce thermodynamic losses.

Drost, M.K.; White, M.D.

1990-04-01T23:59:59.000Z

140

COMPENDIUM OF COMPLETED TESTING IN SUPPORT OF ROTARY MICROFILTRATION AT SAVANNAH RIVER SITE AND HANFORD  

SciTech Connect

This report presents a chronological summary of previous technology development efforts concerning the rotary microfiltration (RMF) unit from SpinTek{trademark}. Rotary microfiltration has been developed for high radiation application over the last decades as one of the optional filtration techniques for supplemental treatment. Supplemental treatment includes a near- or in-tank solids separation and subsequent cesium removal unit, followed by an immobilization technique; this includes options such as steam reforming, bulk vitrification or cast stone (grout). The main difference between RMF and standard cross flow filtration (CFF) is the disconnection of filtrate flux from feed velocity; i.e., filtrate flux is only dependent on transmembrane pressure, filter fouling and temperature. These efforts have been supported by the U.S. Department of Energy (DOE), Office of Cleanup Technologies since the 1990s by their Environmental Management Program (currently EM-31). In order to appropriately address future testing needs, a compilation of the relevant previous testing reports was essential. This compendium does not intend to cover all of the presentations/reports that were produced over the last decades but focuses on those of relevance for developing an RMF unit fit for deployment at the Hanford site. The report is split into three parts: (1) an introductory overview, (2) Figure 1 graphically covering the main development steps and its key players and (3) a more detailed table of the citations and brief descriptions of results and recommendations.

HUBER HJ

2011-05-24T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Baseline Design Compliance Matrix for the Rotary Mode Core Sampling System  

SciTech Connect

The purpose of the design compliance matrix (DCM) is to provide a single-source document of all design requirements associated with the fifteen subsystems that make up the rotary mode core sampling (RMCS) system. It is intended to be the baseline requirement document for the RMCS system and to be used in governing all future design and design verification activities associated with it. This document is the DCM for the RMCS system used on Hanford single-shell radioactive waste storage tanks. This includes the Exhauster System, Rotary Mode Core Sample Trucks, Universal Sampling System, Diesel Generator System, Distribution Trailer, X-Ray Cart System, Breathing Air Compressor, Nitrogen Supply Trailer, Casks and Cask Truck, Service Trailer, Core Sampling Riser Equipment, Core Sampling Support Trucks, Foot Clamp, Ramps and Platforms and Purged Camera System. Excluded items are tools such as light plants and light stands. Other items such as the breather inlet filter are covered by a different design baseline. In this case, the inlet breather filter is covered by the Tank Farms Design Compliance Matrix.

LECHELT, J.A.

2000-10-17T23:59:59.000Z

142

Comparison of the performance of open cycle air conditioners utilizing rotary desiccant dehumidifiers  

DOE Green Energy (OSTI)

This paper presents the results of an investigation of open cycle cooling systems using rotary desiccant dehumidifiers. Three systems, the ventilation, recirculation, and Dunkle cycles have been modeled. The performance of these systems coupled with an air-based solar system has been determined using TRNSYS simulations of system operation in four representative US climates. The system COP, fraction of the total cooling load met by the desiccant system, and fraction of the thermal energy provided by solar energy are compared. An assessment of the effect of climate and system parameters on the relative performance of the three system configurations is made. It is shown that in order to meet residential loads of 7 to 11 kW with a COP on the order of unity, systems with high effectiveness must be employed. These systems were also found to perform well when operated solely with a solar thermal input.

Jurinak, J.J.; Beckman, W.A.

1985-01-01T23:59:59.000Z

143

Control schemes for an industrial rotary calciner with a heat shield around the combustion zone  

SciTech Connect

Soda ash (sodium carbonate) is produced by calcining natural trona ore (sodium sesquicarbonate) in rotary calciners. Shell overheating, the consequent deformation of the calciner shell, and heat loss are frequently encountered problems during this operation. Installation of a concentric, metallic heat shield around the calciner`s combustion zone can help to reduce the shell temperature and recover some of the energy that would otherwise be lost. Another problem often encountered is the deterioration of product quality when the system inputs deviate from their design rates. A mathematical model of the calciner with a heat shield is used to design different control schemes in order to maintain the product quality. Performance of the designed control schemes is demonstrated via computer simulation.

Ciftci, S.; Kim, N.K. [Michigan Technological Univ., Houghton, MI (United States). Dept. of Chemical Engineering] [Michigan Technological Univ., Houghton, MI (United States). Dept. of Chemical Engineering

1999-03-01T23:59:59.000Z

144

Method and apparatus for maximizing throughput of indirectly heated rotary kilns  

DOE Patents (OSTI)

An apparatus and method for achieving improved throughput capacity of indirectly heated rotary kilns used to produce pyrolysis products such as shale oils or coal oils that are susceptible to decomposition by high kiln wall temperatures is disclosed. High throughput is achieved by firing the kiln such that optimum wall temperatures are maintained beginning at the point where the materials enter the heating section of the kiln and extending to the point where the materials leave the heated section. Multiple high velocity burners are arranged such that combustion products directly impact on the area of the kiln wall covered internally by the solid material being heated. Firing rates for the burners are controlled to maintain optimum wall temperatures.

Coates, Ralph L; Smoot, L. Douglas; Hatfield, Kent E

2012-10-30T23:59:59.000Z

145

An Advanced Solar-Powered Rotary Solid Adsorption Refrigerator with High Performance  

E-Print Network (OSTI)

In this paper, according to practical consideration, a new solar powered rotary solid adsorption refrigerator system adopting activated carbon fibre + ethanol as its adsorption pair has been designed with higher performance. Moreover, the principle of the refrigeration cycle, different components of the machine, selection of working pairs and feasible theory analysis of the refrigeration system all have been presented in detail. In addition, it shows that the new refrigerator has many great advantages including a simple structure, fast refrigeration, higher thermodynamic coefficient, friendly to the atmospheric environment, etc. This paper explains that the refrigerating process is constant, which has a promising potential for competing the 'intermittent' cycle reported before. Through improving the refrigerant performance of heat and mass transfer in the adsorbent bed, the refrigeration cycle has been advanced from the aspect of utilization of the thermal energy from low-temperature level resources. In addition, it is shown that the commercial solar powered refrigerator will be existent in the near future.

Zheng, A.; Gu, J.

2006-01-01T23:59:59.000Z

146

Stable five axes cryogenic photoemission manipulator without a differentially pumped rotary feedthrough  

Science Conference Proceedings (OSTI)

We report on the design and construction of an ultrahigh vacuum compatible cryogenic manipulator for angle resolved photoemission spectroscopy. Unlike designs that have been used so far, our design allows five motions (three translational and two angular) without a differentially pumped rotary feedthrough. The design greatly reduces the sample motion upon rotation, which is crucial in automatic data acquisition over a large area in the momentum space. The constructed manipulator shows smooth motions in vacuum and the lowest temperature it could reach is about 8 K at the sample position. Angular reproducibilities are found to be about 0.02 deg. for both of the angular motions. The wobbling motion from the rotation around the vertical rotation axis is found to be virtually nonexistent (less than 0.1 mm)

Kim, Bum Joon; Kim, Hyeong-Do; Cho, Deok-Yong; Kim, Myongjin; Oh, S.-J.; Kim, Changyoung [School of Physics and Center for Strongly Correlated Materials Research, Seoul National University, Seoul 151-742 (Korea, Republic of); Pohang Accelerator Laboratory, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of); School of Physics and Center for Strongly Correlated Materials Research, Seoul National University, Seoul 151-742 (Korea, Republic of); Pohang Accelerator Laboratory, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of); School of Physics and Center for Strongly Correlated Materials Research, Seoul National University, Seoul 151-742 (Korea, Republic of); Institute of Physics and Applied Physics, Yonsei University, Seoul 120-749 (Korea, Republic of)

2005-06-15T23:59:59.000Z

147

Unsteady-state material balance model for a continuous rotary dissolver  

Science Conference Proceedings (OSTI)

The unsteady-state continuous rotary dissolver material balance code (USSCRD) is a useful tool with which to study the performance of the rotary dissolver under a wide variety of operating conditions. The code does stepwise continuous material balance calculations around each dissolver stage and the digester tanks. Output from the code consists of plots and tabular information on the stagewise concentration profiles of UO{sub 2}, PuO{sub 2}, fission products, Pu(NO{sub 3}){sub 4}, UO{sub 2}(NO{sub 3}){sub 2}, fission product nitrates, HNO{sub 3}, H{sub 2}O, stainless steel, total particulate, and total fuel in pins. Other information about material transfers, stagewise liquid volume, material inventory, and dissolution performance is also provided. This report describes the development of the code, its limitations, key operating parameters, usage procedures, and the results of the analysis of several sets of operating conditions. Of primary importance in this work was the estimation of the steady-state heavy metal inventory in a 0.5-t/d dissolver drum. Values ranging from {similar_to}12 to >150 kg of U + Pu were obtained for a variety of operating conditions. Realistically, inventories are expected to be near the lower end of this range. Study of the variation of operating parameters showed significant effects on dissolver product composition from intermittent solids feed. Other observations indicated that the cycle times for the digesters and shear feed should be closely coupled in order to avoid potential problems with off-specification product. 19 references, 14 tables.

Lewis, B.E.

1984-09-01T23:59:59.000Z

148

EPRI Clean Water Act 316(b) Fish Protection Technology Workshop Proceedings: September 30, 2004, Holden, Massachusetts  

Science Conference Proceedings (OSTI)

This compact disc (CD) contains presentations made at the EPRI Clean Water Act §316(b) Fish Protection Technology Workshop held at the facilities of Alden Research Laboratory in Holden, Massachusetts on September 30, 2004. The presentations provide engineering and visual information on many types of cooling water intake structure fish protection technologies, including barrier nets, behavioral barriers (strobe lights and acoustic systems), traveling water screens, rotary screens, flat panel and cyli...

2004-12-27T23:59:59.000Z

149

DSP-Based Sensor-less Permanent Magnet Synchronous Motor Driver With Quasi-Sine PWM for Air-Conditioner Rotary Compressor.  

E-Print Network (OSTI)

??This thesis presented a sensor-less permanent magnet synchronous motor (PMSM) driver for controlling air-conditioner rotary compressor speed. In this thesis, a quasi-sine pulse-width modulation (PWM)… (more)

Liu, Li-hsiang

2012-01-01T23:59:59.000Z

150

Coal desulfurization in a rotary kiln combustor. Quarterly report No. 1, April 16, 1990--July 15, 1990  

Science Conference Proceedings (OSTI)

BCR National Laboratory (BCRNL) has initiated a project aimed at evaluating the technical and economic feasibility of using a rotary kiln, suitably modified, to burn Pennsylvania anthracite wastes, co-fired with high-sulfur bituminous coal. Limestone will be injected into the kiln for sulfur control, to determine whether high sulfur capture levels can be achieved with high sorbent utilization. The principal objectives of this work are: (1) to prove the feasibility of burning anthracite refuse, with co-firing of high-sulfur bituminous coal and with limestone injection for sulfur emissions control, in a rotary kiln fitted with a Universal Energy International (UEI) air injector system; (2) to determine the emissions levels of SO{sub x} and NO{sub x} and specifically to identify the Ca/S ratios that are required to meet New Source Performance Standards; (3) to evaluate the technical and economic merits of a commercial rotary kiln combustor in comparison to fluidized bed combustors; and, (4) to ascertain the need for further work, including additional combustion tests, prior to commercial application, and to recommend accordingly a detailed program towards this end.

Cobb, J.T. Jr.

1990-08-15T23:59:59.000Z

151

Method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method of destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500.degree. C. to heat the particulate material to a temperature in the range of from about 200.degree. C. to about 900.degree. C. in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

McIntosh, Michael J. (Bolingbrook, IL); Arzoumanidis, Gregory G. (Naperville, IL)

1997-01-01T23:59:59.000Z

152

Method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet. 5 figs.

McIntosh, M.J.; Arzoumanidis, G.G.

1997-09-02T23:59:59.000Z

153

Apparatus and methods for cooling and sealing rotary helical screw compressors  

DOE Patents (OSTI)

In a compression system which incorporates a rotary helical screw compressor, and for any type of gas or refrigerant, the working liquid oil is atomized through nozzles suspended in, and parallel to, the suction gas flow, or alternatively the nozzles are mounted on the suction piping. In either case, the aim is to create positively a homogeneous mixture of oil droplets to maximize the effectiveness of the working liquid oil in improving the isothermal and volumetric efficiencies. The oil stream to be atomized may first be degassed at compressor discharge pressure by heating within a pressure vessel and recovering the energy added by using the outgoing oil stream to heat the incoming oil stream. The stripped gas is typically returned to the compressor discharge flow. In the preferred case, the compressor rotors both contain a hollow cavity through which working liquid oil is injected into channels along the edges of the rotors, thereby forming a continuous and positive seal between the rotor edges and the compressor casing. In the alternative method, working liquid oil is injected either in the same direction as the rotor rotation or counter to rotor rotation through channels in the compressor casing which are tangential to the rotor edges and parallel to the rotor center lines or alternatively the channel paths coincide with the helical path of the rotor edges. 14 figs.

Fresco, A.N.

1997-08-05T23:59:59.000Z

154

Apparatus and methods for cooling and sealing rotary helical screw compressors  

DOE Patents (OSTI)

In a compression system which incorporates a rotary helical screw compressor, and for any type of gas or refrigerant, the working liquid oil is atomized through nozzles suspended in, and parallel to, the suction gas flow, or alternatively the nozzles are mounted on the suction piping. In either case, the aim is to create positively a homogeneous mixture of oil droplets to maximize the effectiveness of the working liquid oil in improving the isothermal and volumetric efficiencies. The oil stream to be atomized may first be degassed at compressor discharge pressure by heating within a pressure vessel and recovering the energy added by using the outgoing oil stream to heat the incoming oil stream. The stripped gas is typically returned to the compressor discharge flow. In the preferred case, the compressor rotors both contain a hollow cavity through which working liquid oil is injected into channels along the edges of the rotors, thereby forming a continuous and positive seal between the rotor edges and the compressor casing. In the alternative method, working liquid oil is injected either in the same direction as the rotor rotation or counter to rotor rotation through channels in the compressor casing which are tangential to the rotor edges and parallel to the rotor centerlines or alternatively the channel paths coincide with the helical path of the rotor edges.

Fresco, Anthony N. (P.O. Box 734, Upton, NY 11973)

1997-01-01T23:59:59.000Z

155

Independent one-way acting hydraulic jar sections for a rotary drill string  

SciTech Connect

First and second separate one-way acting hydraulic jar sections each include inner and outer telescopically arranged tubular members with means for connecting one end of each the inner and outer tubular members of each jar section in the drill string. Spaced seal means between the inner and outer tubular members form a chamber in each jar section for confining hydraulic operating fluid. Hydraulic jar means are formed by cooperating means on the inner and outer tubular members within each operating fluid chamber. The cooperating means is spaced axially and disengaged in each fluid chamber when the drill string is in tension and compression during rotary drilling operation to inhibit damage and wear thereto. The hydraulic jar means in the first jar section is constructed to deliver an up jar and the jar means in the separate second jar section is constructed to deliver a down jar to the drill string. Drive means in a sealed chamber in each jar section connect the inner and outer tubular members of each jar section to allow relative longitudinal movement while preventing relative rotation therebetween. Means to equalize pressure adjacent one end of each of the chambers with the pressure in the well bore is provided in each jar section, which accommodates relative longitudinal movement of the inner and outer tubular members of each jar section for selectively creating an up or down jarring force independently of the well bore pressure.

Anderson, E.A.; Webb, D.D.

1980-10-07T23:59:59.000Z

156

A method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

McIntosh, M.J.; Arzoumanidis, G.G.

1995-12-31T23:59:59.000Z

157

EVALUATION OF ALTERNATIVE FILTER MEDIA FOR THE ROTARY MICROFILTER, PHASE 2  

SciTech Connect

Testing was conducted at the Savannah River National Laboratory (SRNL) to investigate filter membrane performance in an effort to increase rotary microfilter (RMF) throughput. Membranes were tested in the SpinTek Filtration, Inc. Static Test Cell (STC), which permitted quick and easy testing of several different membranes. Testing consisted of 100 hours tests with two different slurry feeds, based on recommendations from the phase 1 testing. One feed contained Monosodium Titanate (MST) solids in a simulated salt solution. The other feed contained simulated sludge batch 6 (SB6) solids in a simulated salt solution. Five membranes were tested, one each from filter manufactures Pall and Porvair and three from the Oak Ridge National Laboratory (ORNL). The membrane from Pall is the current membrane used on the latest generation RMF. The Porvair membrane performed well in previous STC tests as well as one of the ORNL membranes. The other two membranes from ORNL were recently developed and not available for the previous STC test. The results indicate that the Porvair filter performed best with the MST slurry and the ORNL SVB6-1B filter performed best with the SB6 slurry. Difficulty was encountered with the ORNL filters due to their dimensional thickness, which was greater than the recommended filter thickness for the STC. The STC equipment was modified to complete the testing of the ORNL filters.

Fowley, M.

2012-07-31T23:59:59.000Z

158

Performance investigation on a novel two-stage solar driven rotary desiccant cooling system using composite desiccant materials  

Science Conference Proceedings (OSTI)

In this study, a two-stage solar driven rotary desiccant cooling (TSRDC) system with novel configuration and newly developed silica gel-haloid composite desiccant is proposed aiming to reduce regeneration temperature and to achieve high energy performance. Simulated results show that there also exists an optimal rotation speed for TSRDC system. Compared with one-stage system, it is found that for the similar supply air state, the required regeneration temperature of TSRDC system is lower and for the same regeneration temperature, the cooling capacity of TSRDC is bigger. (author)

Ge, T.S.; Li, Y.; Dai, Y.J.; Wang, R.Z. [Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200240 (China)

2010-02-15T23:59:59.000Z

159

Analysis of the Energy-Saving Potential of a Three-Rotary Wheel Fresh Air-Handling Unit  

E-Print Network (OSTI)

To evaluate the energy-saving potential of a proposed three-rotary wheel fresh air-handling unit (TRWFAHU), it is numerically simulated with weather data of Changsha by using a mathematical model. Compared with a conventional fresh air-handling unit, TRWFAHU can save 10.2% of primary energy and greatly decrease the energy consumption of chiller. If waste heat is available for regenerating the desiccant, the system can achieve greater energy savings. It is feasible to improve indoor air quality (IAQ) by increasing ventilation while without increasing energy consumption.

Hao, X.; Zhang, G.; Zou, S.; Liu, H.

2006-01-01T23:59:59.000Z

160

Integrated Status and Effectiveness Monitoring Program - Entiat River Rotary Screw Traps,Snorkel Surveys, and Steelhead Redd Surveys, 2008.  

DOE Green Energy (OSTI)

The USFWS Mid-Columbia River Fishery Resource Office (MCRFRO) operated two rotary screw traps on the Entiat River as part of the Integrated Status and Effectiveness Monitoring Program from March through November of 2008. Along with the smolt traps, juvenile emigrants were also captured at remote locations throughout the Entiat watershed and its major tributary, the Mad River. A total of 16,782 wild salmonids were PIT tagged during the study period. Of this, 3,961(23.6%) were wild Oncorhynchus mykiss, 6,987 (41.6%) were wild spring run O. tshawytscha, and 5,591 (33.3%) were identified as wild O. tshawytscha of unknown run. Rotary screw trap efficiencies averaged 40.3% at the upper (Rkm 11.0) trap and 7.8% for the lower (Rkm 2.0) trap. These efficiencies were pooled for emigrant O. tshawytscha and O. mykiss. The MCRFRO conducted effectiveness monitoring snorkel surveys at 24 sites during the winter period and 30 sites during the summer and fall periods of 2008 as part of the Integrated Status and Effectiveness Monitoring Program in the Entiat River. The 2008 steelhead spawning grounds surveys were conducted weekly in the main Entiat River from rkm 1.1 to 44.2. A total of 222 steelhead redds were identified over the period from February 28 to June 16 2008 with April being the peak spawning month. Approximately 80% of the steelhead redds were located downstream of the rkm 26.

Nelle, R.D.; Desgroseiller, Tom; Cotter, Michael (U.S. Fish and Wildlife Service)

2009-02-17T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Integrated Status and Effectiveness Monitoring Program - Entiat River Rotary Screw Traps, Snorkel Surveys, and Steelhead Redd Surveys, 2008-2009.  

DOE Green Energy (OSTI)

The USFWS Mid-Columbia River Fishery Resource Office (MCRFRO) operated two rotary screw traps on the Entiat River as part of the Integrated Status and Effectiveness Monitoring Program from March through November of 2008. Along with the smolt traps, juvenile emigrants were also captured at remote locations throughout the Entiat watershed and its major tributary, the Mad River. A total of 16,782 wild salmonids were PIT tagged during the study period. Of this, 3,961(23.6%) were wild Oncorhynchus mykiss, 6,987 (41.6%) were wild spring run O. tshawytscha, and 5,591 (33.3%) were identified as wild O. tshawytscha of unknown run. Rotary screw trap efficiencies averaged 40.3% at the upper (Rkm 11.0) trap and 7.8% for the lower (Rkm 2.0) trap. These efficiencies were pooled for emigrant O. tshawytscha and O. mykiss. The MCRFRO conducted effectiveness monitoring snorkel surveys at 24 sites during the winter period and 30 sites during the summer and fall periods of 2008 as part of the Integrated Status and Effectiveness Monitoring Program in the Entiat River. The 2008 steelhead spawning grounds surveys were conducted weekly in the main Entiat River from rkm 1.1 to 44.2. A total of 222 steelhead redds were identified over the period from February 28 to June 16 2008 with April being the peak spawning month. Approximately 80% of the steelhead redds were located downstream of the rkm 26.

Nelle, R.D.; Desgroseillier, Tom; Cotter, Michael [U.S. Fish and Wildlife Service

2009-04-14T23:59:59.000Z

162

EVALUATION OF SUPPLEMENTAL PRE-TREATMENT DEVELOPMENT REQUIREMENTS TO MEET TRL 6 ROTARY MICROFILTRATION  

SciTech Connect

In spring 2011, the Technology Maturation Plan (TMP) for the Supplemental Treatment Project (RPP-PLAN-49827, Rev. 0), Technology Maturation Plan for the Treatment Project (T4S01) was developed. This plan contains all identified actions required to reach technical maturity for a field-deployable waste feed pretreatment system. The supplemental pretreatment system has a filtration and a Cs-removal component. Subsequent to issuance of the TMP, rotary microfiltration (RMF) has been identified as the prime filtration technology for this application. The prime Cs-removal technology is small column ion exchange (ScIX) using spherical resorcinol formaldehyde (sRF) as the exchange resin. During fiscal year 2011 (FY2011) some of the tasks identified in the TMP have been completed. As of September 2011, the conceptual design package has been submitted to DOE as part of the critical decision (CD-1) process. This document describes the remaining tasks identified in the TMP to reach technical maturity and evaluates the validity of the proposed tests to fill the gaps as previously identified in the TMP. The potential vulnerabilities are presented and the completed list of criteria for the DOE guide DOE G 413.3-4 different technology readiness levels are added in an attachment. This evaluation has been conducted from a technology development perspective - all programmatic and manufacturing aspects were excluded from this exercise. Compliance with the DOE G 413.3-4 programmatic and manufacturing requirements will be addressed directly by the Treatment Project during the course of engineering design. The results of this evaluation show that completion of the proposed development tasks in the TMP are sufficient to reach TRL 6 from a technological point of view. The tasks involve actual waste tests using the current baseline configuration (2nd generation disks, 40 psi differential pressure, 30 C feed temperature) and three different simulants - the PEP, an AP-Farm and an S-saltcake. Based on FY2011 dollars used in the TMP, these tests will have ROM costs of $950K and require up to 10 months to complete. Completion of the simulant testing will satisfy the TRL 5 and TRL 6 criteria that are related to system testing with materials that represent the full range of properties in a relevant environment.

HUBER HJ

2011-10-03T23:59:59.000Z

163

Environmental Controls on the Surface Energy Budget over a Large Southern Inland Water in the United States: An Analysis of One-Year Eddy Covariance Flux Data  

Science Conference Proceedings (OSTI)

The authors analyzed the surface energy fluxes that were measured by an eddy covariance system over the Ross Barnett Reservoir in Mississippi for a 1-yr period in 2008. On a monthly basis over the course of the year, positive vertical temperature ...

Heping Liu; Qianyu Zhang; Gordon Dowler

2012-12-01T23:59:59.000Z

164

Evaluation of rotary drum screens used to protect juvenile salmonids in the Yakima River Basin, Washington, USA  

DOE Green Energy (OSTI)

The purpose of this study is to assess the design and operation of rotary drum screens. Chinook salmon Oncorhynchus tshawytscha and steelhead O. mykiss are the potentially affected fish. Cold-branded fish are released upstream of the screen facilities. For descaling tests, the fish are captured as they exit the facility and are examined for injuries, descaling, and post-test mortalities. For screen passage tests, nets are placed in the irrigation ditch, downstream of the screen facilities, to determine if fish can pass through or over the screens. More than 100 tests have been conducted with almost 35,000 fish. Additionally, nearly 2000 native fish have been evaluated. Usually less than 2% of the test fish are injured or dead, and the condition of test fish does not differ from the controls. Less than 2% of the fish pass through or over the screens when the screen seals are properly installed and maintained.

Neitzel, D.A.; Abernethy, C.S. (Pacific Northwest Lab., Richland, WA (USA)); Clune, T.J. (USDOE Bonneville Power Administration, Yakima, WA (USA))

1990-10-01T23:59:59.000Z

165

SERI Desiccant Cooling Test Facility. Status report. Preliminary data on the performance of a rotary parallel-passage silica-gel dehumidifier  

DOE Green Energy (OSTI)

This report describes the SERI Desiccant Cooling Test Facility. The facility can test bench-scale rotary dehumidifiers over a wide range of controlled conditions. We constructed and installed in the test loop a prototype parallel-passage rotary dehumidifier that has spirally wound polyester tape coated with silica gel. The initial tests gave satisfactory results indicating that approximately 90% of the silica gel was active and the overall Lewis number of the wheel was near unity. The facility has several minor difficulties including an inability to control humidity satisfactorily and nonuniform and highly turbulent inlet velocities. To completely validate the facility requires a range of dehumidifier designs. Several choices are available including constructing a second parallel-passage dehumidifier with the passage spacing more uniform.

Schultz, K.J.

1986-04-01T23:59:59.000Z

166

Apparatus and method for controlling the rotary airlocks in a coal processing system by reversing the motor current rotating the air lock  

SciTech Connect

An improvement to a coal processing system where hard materials found in the coal may cause jamming of either inflow or outflow rotary airlocks, each driven by a reversible motor. The instantaneous current used by the motor is continually monitored and compared to a predetermined value. If an overcurrent condition occurs, indicating a jamming of the airlock, a controller means starts a "soft" reverse rotation of the motor thereby clearing the jamming. Three patterns of the motor reversal are provided.

Groombridge, Clifton E. (Hardin, MT)

1996-01-01T23:59:59.000Z

167

Desalination of brackish ground waters and produced waters using in-situ precipitation.  

Science Conference Proceedings (OSTI)

The need for fresh water has increased exponentially during the last several decades due to the continuous growth of human population and industrial and agricultural activities. Yet existing resources are limited often because of their high salinity. This unfavorable situation requires the development of new, long-term strategies and alternative technologies for desalination of saline waters presently not being used to supply the population growth occurring in arid regions. We have developed a novel environmentally friendly method for desalinating inland brackish waters. This process can be applied to either brackish ground water or produced waters (i.e., coal-bed methane or oil and gas produced waters). Using a set of ion exchange and sorption materials, our process effectively removes anions and cations in separate steps. The ion exchange materials were chosen because of their specific selectivity for ions of interest, and for their ability to work in the temperature and pH regions necessary for cost and energy effectiveness. For anion exchange, we have focused on hydrotalcite (HTC), a layered hydroxide similar to clay in structure. For cation exchange, we have developed an amorphous silica material that has enhanced cation (in particular Na{sup +}) selectivity. In the case of produced waters with high concentrations of Ca{sup 2+}, a lime softening step is included.

Krumhansl, James Lee; Pless, Jason; Nenoff, Tina Maria; Voigt, James A.; Phillips, Mark L. F.; Axness, Marlene; Moore, Diana Lynn; Sattler, Allan Richard

2004-08-01T23:59:59.000Z

168

Investigation of a rotary valving system with variable valve timing for internal combustion engines: Final technical report  

DOE Green Energy (OSTI)

The objective of the program was to provide a functional demonstration of the Hansen Rotary Valving System with Variable Valve timing (HRVS/VVT), capable of throttleless inlet charge control, as an alternative to conventional poppet-valves for use in spark ignited internal combustion engines. The goal of this new technology is to secure benefits in fuel economy, broadened torque band, vibration reduction, and overhaul accessibility. Additionally, use of the variable valve timing capability to vary the effective compression ratio is expected to improve multi-fuel tolerance and efficiency. Efforts directed at the design of HRVS components proved to be far more extensive than had been anticipated, ultimately requiring that proof-trial design/development work be performed. Although both time and funds were exhausted before optical or ion-probe types of in-cylinder investigation could be undertaken, a great deal of laboratory data was acquired during the course of the design/development work. This laboratory data is the basis for the information presented in this Final Report.

Cross, P.C.; Hansen, C.N.

1994-11-18T23:59:59.000Z

169

Enumeration of Juvenile Salmonids in the Okanogan Basin Using Rotary Screw Traps, Performance Period: March 15, 2006 - July 15, 2006.  

DOE Green Energy (OSTI)

The Colville Tribes identified the need for collecting baseline census data on the timing and abundance of juvenile salmonids in the Okanogan River basin for the purpose of documenting local fish populations, augmenting existing fishery data and assessing natural production trends of salmonids. This report documents and assesses the pilot year of rotary trap capture of salmonid smolts on the Okanogan River. The project is a component of the Colville Tribes Okanogan Basin Monitoring and Evaluation Program (OBMEP) which began in 2004. Trapping for outmigrating fish began on 14 March 2006 and continued through 11 July 2006. Anadromous forms of Oncorhynchus, including summer steelhead (O. mykiss), Chinook (O. tshawytscha), and sockeye (O. nerka), were targeted for this study; all have verified, natural production in the Okanogan basin. Both 8-ft and 5-ft rotary screw traps were deployed on the Okanogan River from the Highway 20 Bridge and typically fished during evening hours or 24 hours per day, depending upon trap position and discharge conditions. Juvenile Chinook salmon were the most abundant species trapped in 2006 (10,682 fry and 2,024 smolts), followed by sockeye (205 parr and 3,291 smolts) and steelhead (1 fry and 333 smolts). Of the trapped Chinook, all fry were wild origin and all but five of the smolts were hatchery-reared. All trapped sockeye were wild origin and 88% of the steelhead smolts were hatchery-reared. Mark-recapture experiments were conducted using Chinook fry and hatchery-reared steelhead smolts (sockeye were not used in 2006 because the peak of the juvenile migration occurred prior to the onset of the mark-recapture experiments). A total of 930 chinook fry were marked and released across eight separate release dates (numbers of marked Chinook fry released per day ranged from 34 to 290 fish). A total of 11 chinook fry were recaptured for an overall trap efficiency of 1.18%. A total of 710 hatchery-reared steelhead were marked and released across three separate release dates (numbers of steelhead released per day ranged from 100 to 500 fish). A total of 12 steelhead were recaptured for an overall trap efficiency of 1.69%. A pooled Peterson estimator with a Chapman modification was used to produce population estimates for wild Chinook fry and hatchery-reared steelhead based on the results of the mark-recapture experiments. The 2006 populations for Chinook and steelhead were estimated to be 381,554 (95% confidence intervals: 175,731-587,377) and 14,164 (6,999-21,330), respectively. The population estimates were based on the periods in which mark-recapture experiments were initialized through the end of the trapping season (10 May for steelhead and 1 June for Chinook).

Johnson, Peter N.; Rayton, Michael D.

2007-05-01T23:59:59.000Z

170

Development of a cable reel development system using a rotary joint for kilometer lengths of two-fiber multi-mode fiber optic cable  

SciTech Connect

Brookhaven National Laboratory (BNL) recently developed a two-component system for use during remote inspections. The system consists of a mobile unit with television cameras and other equipment and a stationary base station. A variety of signals must be continually transmitted between the two system components as the mobile unit is moved from the location to another. Two channels of broadband (10MHz) NTSC video are transmitted from the mobile unit to the base station, and a bi-directional ``talk set`` provides audio communication between personnel at each location. In addition, several channels of RS-232 are required to support present and future instruments used at the mobile unit and controlled by personnel at the base station. Brookhaven developed a mobile unit which communicated with a base station over a 2-fiber multimode fiber optic cable. One of the design requirements was maintaining constant communication with the base station during the time the mobile unit was moved about. To provide uninterrupted communications, deployment of the 1-km long fiber optic cable was initially performed with a ``spinning reel`` mechanism. The spinning reel mechanism proved to be mechanically unsuitable, and so the cable deployment mechanism was redesigned to spool the cable off the reel. The requirement for uninterrupted communications required a two-channel fiber optic rotary joint in the design. Incorporation of the rotary joint into the design is described, and appropriate reference material is included.

Curtiss, J.A.; Jahelka, J.R.

1995-08-11T23:59:59.000Z

171

A safety assessment of rotary mode core sampling in flammable gas single shell tanks: Hanford Site, Richland, Washington  

SciTech Connect

This safety assessment (SA) addresses each of the required elements associated with the installation, operation, and removal of a rotary-mode core sampling (RMCS) device in flammable-gas single-shell tanks (SSTs). The RMCS operations are needed in order to retrieve waste samples from SSTs with hard layers of waste for which push-mode sampling is not adequate for sampling. In this SA, potential hazards associated with the proposed action were identified and evaluated systematically. Several potential accident cases that could result in radiological or toxicological gas releases were identified and analyzed and their consequences assessed. Administrative controls, procedures and design changes required to eliminate or reduce the potential of hazards were identified. The accidents were analyzed under nine categories, four of which were burn scenarios. In SSTS, burn accidents result in unacceptable consequences because of a potential dome collapse. The accidents in which an aboveground burn propagates into the dome space were shown to be in the ``beyond extremely unlikely`` frequency category. Given the unknown nature of the gas-release behavior in the SSTS, a number of design changes and administrative controls were implemented to achieve these low frequencies. Likewise, drill string fires and dome space fires were shown to be very low frequency accidents by taking credit for the design changes, controls, and available experimental and analytical data. However, a number of Bureau of Mines (BOM) tests must be completed before some of the burn accidents can be dismissed with high confidence. Under the category of waste fires, the possibility of igniting the entrapped gases and the waste itself were analyzed. Experiments are being conducted at the BOM to demonstrate that the drill bit is not capable of igniting the trapped gas in the waste. Laboratory testing and thermal analysis demonstrated that, under normal operating conditions, the drill bit will not create high enough temperatures to initiate a propagating reaction in the waste. However, system failure that coincides in a waste layer with high organic content and low moisture may initiate an exothermic reaction in the waste. Consequently, a conservative approach based on the current state of the knowledge resulted in limiting the drilling process to a subset of the flammable-gas tanks. Accidents from the chemical reactions and criticality category are shown to result in acceptable risk. A number of accidents are shown to potentially result in containment (tank liner) breach below the waste level. Mitigative features are provided for these accidents. Gas-release events without burn also are analyzed, and radiological and toxicological consequences are shown to be within risk guidelines. Finally, the consequences of potential spills are shown to be within the risk guidelines.

Raymond, R.E.

1996-04-15T23:59:59.000Z

172

Rotary bulk solids divider  

DOE Patents (OSTI)

An apparatus for the disbursement of a bulk solid sample comprising, a gravity hopper having a top open end and a bottom discharge end, a feeder positioned beneath the gravity hopper so as to receive a bulk solid sample flowing from the bottom discharge end, and a conveyor receiving the bulk solid sample from the feeder and rotating on an axis that allows the bulk solid sample to disperse the sample to a collection station.

Maronde, Carl P. (McMurray, PA); Killmeyer, Jr., Richard P. (Pittsburgh, PA)

1992-01-01T23:59:59.000Z

173

Rotary drilling jar  

SciTech Connect

This patent describes an improved jar for use in freeing well tools and the like stuck in a well bore. The improvement comprises: tubular, inner mandrel means having a downwardly facing shoulder and having an annular groove in an exterior surface located relatively below the shoulder. The annular groove in the inner mandrel means tapers inwardly from an exterior surface of the inner mandrel means. The inner mandrel means are arranged for connection to a conduit when positioned in the well bore; and tubular, outer mandrel means encircling the inner mandrel means and arranged at a lower end for connection to the well to tool and having an upwardly facing abutment engageable with the downwardly facing shoulder.

Loeb, J.B.; Osborne, A.J.; Miglierini, R.A.

1987-05-05T23:59:59.000Z

174

Rotary slot dog  

SciTech Connect

A clamp or dog is disclosed which preferably comprises a slotted stepped cylindrical body which is inserted into a hole in a workpiece and then fastened to a base or fixture using a screw which is inserted through the slot. The stepped configuration provides an annular clamping surface which securely clamps the workpiece against the base or fixture. The slotted cylindrical configuration permits adjustment of the workpiece and retaining clamp in any direction, i.e., over 360.degree., relative to the mounting position of the screw in the base or fixture.

Cutburth, Ronald W. (Tracy, CA); Smauley, David A. (Livermore, CA)

1987-01-01T23:59:59.000Z

175

Water Challenges for Geologic Carbon Capture and Sequestration  

E-Print Network (OSTI)

Finally, a key issue in desalination is brine condensatean opportunity for inland desalination, whereby fresh waterthe inlet pressure for the desalination system, reducing the

Newmark, Robin L.; Friedmann, Samuel J.; Carroll, Susan A.

2010-01-01T23:59:59.000Z

176

Water Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Quality Water Quality We protect water quality through stormwater control measures and an extensive network of monitoring wells and stations encompassing groundwater, surface...

177

Water Research Consortium U.S. Department of Energy Grant Award Number DE-FG02-05ER64132 Final Technical Report For Period Beginning: 15 September 2005 And Ending: 31 December 2009 Report Date: 16 March 2010  

SciTech Connect

This report summarizes the activities of the INRA Water Research Consortium (IWRC) for the period beginning September 15, 2005 and ending December 16, 2010. This report compares accomplishments to project objectives, documents the activities associated with this project, and lists products developed during the course of the project. The Water Resources Research Needs Assessment team received funding from the Inland Northwest Research Alliance Water Resources Steering Committee to facilitate a structured needs assessment process that could provide a basis for future targeted research efforts to improve regional water resources management in the Inland Northwest region. The original INRA proposal specifically mentions the need to conduct a detailed assessment of the information and research needs of policy makers and water user groups during a period of increasing competition for scarce water supplies. A particular focus of this assessment would be to understand what types of research might facilitate water resource management during periods of drought. The specific goals of the Needs Assessment project were to: (1) Quickly ascertain the perceptions of diverse stakeholders in this region; (2) Condense this complex information into a format that can be shared with the INRA scientific panel, and (3) Develop of a realistic set of research needs & priorities that can shape future INRA-funded research activities.

Steven R. Billingsley

2010-03-18T23:59:59.000Z

178

Desalination of brackish waters using ion exchange media.  

Science Conference Proceedings (OSTI)

An environmentally friendly method and materials study for desalinating inland brackish waters (i.e., coal bed methane produced waters) using a set of ion-exchange materials is presented. This desalination process effectively removes anions and cations in separate steps with minimal caustic waste generation. The anion-exchange material, hydrotalcite (HTC), exhibits an ion-exchange capacity (IEC) of {approx} 3 mequiv g{sup -1}. The cation-exchange material, an amorphous aluminosilicate permutite-like material, (Na{sub x+2y}Al{sub x}Si{sub 1-x}O{sub 2+y}), has an IEC of {approx}2.5 mequiv g{sup -1}. These ion-exchange materials were studied and optimized because of their specific ion-exchange capacity for the ions of interest and their ability to function in the temperature and pH regions necessary for cost and energy effectiveness. Room temperature, minimum pressure column studies (once-pass through) on simulant brackish water (total dissolved solids (TDS) = 2222 ppm) resulted in water containing TDS = 25 ppm. A second once-pass through column study on actual produced water (TDS = {approx}11,000) with a high carbonate concentration used an additional lime softening step and resulted in a decreased TDS of 600 ppm.

Pless, Jason D.; Krumhansl, James Lee; Nenoff, Tina Maria; Voigt, James A.; Phillips, Mark L. F.; Axness, Marlene; Moore, Diana Lynn

2005-01-01T23:59:59.000Z

179

Desalination of brackish waters using ion-exchange media  

Science Conference Proceedings (OSTI)

An environmentally friendly method and materials study for desalinating inland brackish waters (i.e., coal bed methane produced waters) using a set of ion-exchange materials is presented. This desalination process effectively removes anions and cations in separate steps with minimal caustic waste generation. The anion-exchange material, hydrotalcite (HTC), exhibits an ion-exchange capacity (IEC) of around 3 mequiv g{sup -1}. The cation-exchange material, an amorphous aluminosilicate permutite-like material, (Na{sub x}+2yAl{sub x}Si{sub 1}-xO{sub 2+y}), has an IEC of around to 2.5 mequiv g{sup -1}. These ion-exchange materials were studied and optimized because of their specific ion-exchange capacity for the ions of interest and their ability to function in the temperature and pH regions necessary for cost and energy effectiveness. Room temperature, minimum pressure column studies (once-pass through) on simulant brackish water (total dissolved solids (TDS) = 2222 ppm) resulted in water containing TDS = 25 ppm. A second once-pass through column study on actual produced water (TDS = similar to 11 000) with a high carbonate concentration used an additional lime softening step and resulted in a decreased TDS of 600 ppm.

Pless, J.D.; Philips, M.L.F.; Voigt, J.A.; Moore, D.; Axness, M.; Krumhansl, J.L.; Nenoff, T.M. [Sandia National Labs., Albuquerque, NM (United States)

2006-06-21T23:59:59.000Z

180

Energy and water development appropriations for 1987. Part 8. Hearings before a Subcommittee of the Committee on Appropriations, House of Representatives, Ninety-Ninth Congress, Second Session  

SciTech Connect

Part 8 of the hearing record covers testimony given by individuals, organizations, and members of Congress on specific energy and water projects. Part 8 begins with testimony in support of the Coosa-Alabama Waterway and Port of Mobile project, and includes cost details and information about the economic benefits that will accrue to the region with the inland waterway. There is also testimony pertaining to the Warrier-Tombigbee Waterway, the Appalachicola-Chattahoochee Flint Waterway, and projects affecting the Red River and South Columbia Basins, California, and other regions. Supporting documentation accompanies the testimony given for each project.

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Turbid water Clear water  

E-Print Network (OSTI)

: The submersible laser bathymetric (LBath) optical system is capable of simultaneously providing visual images- dynamical wing. This underwater package is pulled through the water by a single towed cable with fiber optic special high energy density optical fibers. A remote Pentium based PC also at the surface is used

Jaffe, Jules

182

Water Intoxication  

E-Print Network (OSTI)

2008, May 14). Too much water raises seizure risk in babies.id=4844 9. Schoenly, Lorry. “Water Intoxication and Inmates:article/246650- overview>. 13. Water intoxication alert. (

Lingampalli, Nithya

2013-01-01T23:59:59.000Z

183

Pharmaceutical Waters  

Science Conference Proceedings (OSTI)

Table 3   Water treatment process for water for injection (WFI)...deionization WFI production Evaporation still or vapor compression...

184

Water Snakes  

NLE Websites -- All DOE Office Websites (Extended Search)

of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation WATER SNAKES Contrary to popular belief, the Water Moccasin commonly known as the...

185

Investigating Water  

E-Print Network (OSTI)

This 3-ring binder contains teaching plans for 12 lessons on topics such as "Water in Our Daily Lives," "The Water Cycle," "Amazing Aquifers," "Water and Soil," "Aquatic Ecosystems," and "Water Wise Use." Accompanying each lesson plan are activity and record sheets for hands-on learning experiences. This curriculum is intended for students in about 4th to 8th grades.

Howard Jr., Ronald A.

2002-01-02T23:59:59.000Z

186

Energy Basics: Water Heating  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Storage Water Heaters Tankless Demand Water Heaters Heat Pump Water Heaters Solar Water Heaters Tankless Coil & Indirect Water Heaters Water Heating A variety of...

187

Ground Water  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Nature Bulletin No. 408-A February 27, 1971 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation GROUND WATER We take...

188

Water Dogs  

NLE Websites -- All DOE Office Websites (Extended Search)

NA Question: I'd like to know about the water dogs and their life cycle? Replies: Water dog, or mud puppy, is a common name for a type of salamander that never develops lungs, but...

189

Water Bugs  

NLE Websites -- All DOE Office Websites (Extended Search)

Bugs Bugs Nature Bulletin No. 221-A March 12, 1966 Forest Preserve District of Cook County Seymour Simon, President Roland F. Eisenbeis, Supt. of Conservation WATER BUGS It is fascinating to lie in a boat or on a log at the edge of the water and watch the drama that unfolds among the small water animals. Among the star performers in small streams and ponds are the Water Bugs. These are aquatic members of that large group of insects called the "true bugs", most of which live on land. Moreover, unlike many other types of water insects, they do not have gills but get their oxygen directly from the air. Those that do go beneath the surface usually carry an oxygen supply with them in the form of a shiny glistening sheath of air imprisoned among a covering of fine waterproof hairs. The common water insect known to small boys at the "Whirligig Bug" is not a water bug but a beetle.

190

EXTENSION WATER SUMMIT PRIORITY: WATER CONSERVATION  

E-Print Network (OSTI)

EXTENSION WATER SUMMIT PRIORITY: WATER CONSERVATION Leadership Team Subcommittee: Joan Bradshaw Michael Dukes Pierce Jones Kati Migliaccio #12;Water Conservation - Situation · Florida water supplies;Water Conservation Initiative 2: Enhancing and protecting water quality, quantity, and supply Priority 1

Slatton, Clint

191

Reusing Water  

NLE Websites -- All DOE Office Websites (Extended Search)

Reusing Water Reusing Water Reusing Water Millions of gallons of industrial wastewater is recycled at LANL by virtue of a long-term strategy to treat wastewater rather than discharging it into the environment. April 12, 2012 Water from cooling the supercomputer is release to maintain a healthy wetland. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email We reuse the same water up to six times before releasing it back into the environment cleaner than when it was pumped. How many times does LANL reuse water? Wastewater is generated from some of the facilities responsible for the Lab's biggest missions, such as the cooling towers of the Los Alamos Neutron Science Center, one of the Lab's premier science research

192

Water Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

- National Energy Technology Laboratory Office of Systems Analyses and Planning EUEC Energy & Environment Conference 2008, EPS,1292008 2 * Water Scarcity Seen Dampening Case...

193

Water and Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Water in swimming pool Water and Energy The water and energy technology research focuses on improving the efficiency of energy and water use in water delivery, supply and...

194

Energy Basics: Water Heating  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

about: Conventional Storage Water Heaters Demand (Tankless or Instantaneous) Water Heaters Heat Pump Water Heaters Solar Water Heaters Tankless Coil and Indirect Water Heaters...

195

Texas Inland Refinery Utilization and Capacity  

U.S. Energy Information Administration (EIA)

-No Data Reported; --= Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Notes: Totals may not equal sum ...

196

Texas Inland Refinery and Blender Net Production  

U.S. Energy Information Administration (EIA)

Residual Fuel Oil: 143: 161: 168: 154: 187: 179: 1993-2013: Less Than 0.31 Percent Sulfur: 71: 83: 75: 85: 81: 77: 1993-2013: ... Processing Gain(-) ...

197

Reduction of iron-oxide-carbon composites: part II. Rates of reduction of composite pellets in a rotary hearth furnace simulator  

SciTech Connect

A new ironmaking concept is being proposed that involves the combination of a rotary hearth furnace (RHF) with an iron-bath smelter. The RHF makes use of iron-oxide-carbon composite pellets as the charge material and the final product is direct-reduced iron (DRI) in the solid or molten state. This part of the research includes the development of a reactor that simulated the heat transfer in an RHF. The external heat-transport and high heating rates were simulated by means of infrared (IR) emitting lamps. The reaction rates were measured by analyzing the off-gas and computing both the amount of CO and CO{sub 2} generated and the degree of reduction. The reduction times were found to be comparable to the residence times observed in industrial RHFs. Both artificial ferric oxide (PAH) and naturally occurring hematite and taconite ores were used as the sources of iron oxide. Coal char and devolatilized wood charcoal were the reductants. Wood charcoal appeared to be a faster reductant than coal char. However, in the PAH-containing pellets, the reverse was found to be true because of heat-transfer limitations. For the same type of reductant, hematite-containing pellets were observed to reduce faster than taconite-containing pellets because of the development of internal porosity due to cracking and fissure formation during the Fe2O{sub 3}-to-Fe3O{sub 4} transition. This is, however, absent during the reduction of taconite, which is primarily Fe3O{sub 4}. The PAH-wood-charcoal pellets were found to undergo a significant amount of swelling at low-temperature conditions, which impeded the external heat transport to the lower layers. If the average degree of reduction targeted in an RHF is reduced from 95 to approximately 70 pct by coupling the RHF with a bath smelter, the productivity of the RHF can be enhanced 1.5 to 2 times. The use of a two- or three-layer bed was found to be superior to that of a single layer, for higher productivities.

Halder, S.; Fruehan, R.J. [Praxair Inc., Tonawanda, NY (United States). Praxair Technological Center

2008-12-15T23:59:59.000Z

198

Water pollution  

SciTech Connect

Ballast water, which is sea water that is carried in oil tankers to provide stability, can become contaminated with oil. Alyeska Pipeline Service Company runs a water treatment plant at its pipeline terminal at Prot Valdez, Alaska, to treat ballast water before it is discharged into the sea. GAO reviewed EPA's recently reissued National Pollution Discharge Elimination System permit for the Port Valdez facility. In this report, GAO compares the effluent limits and other requirements under the reissued permit with those of the old permit, determines the reasons for changes in the reissued permit, and examines Alyeska's initial efforts to comply with the reissued permit's effluent limits and reporting requirements.

1990-06-01T23:59:59.000Z

199

Conveyor with rotary airlock apparatus  

DOE Patents (OSTI)

This invention is comprised of an apparatus for transferring objects from a first region to a second region, the first and second regions having differing atmospheric environments. The apparatus includes a shell having an entrance and an exit, a conveyer belt running through the shell from the entrance to the exit, and a horizontally mounted `revolving door` with at least four vanes revolving about its axis. The inner surface of the shell and the top surface of the conveyer belt act as opposing walls of the `revolving door`. The conveyer belt dips as it passes under but against the revolving vanes so as not to interfere with them but to engage at least two of the vanes and define thereby a moving chamber. Preferably, the conveyer belt has ridges or grooves on its surface that engage the edges of the vanes and act to rotate the vane assembly. Conduits are provided that communicate with the interior of the shell and allow the adjustment of the atmosphere of the moving chamber or recovery of constituents of the atmosphere of the first region from the moving chamber before they escape to the second region.

Kronbert, J.W.

1993-01-01T23:59:59.000Z

200

Rotary powder feed through apparatus  

DOE Patents (OSTI)

A device for increasing the uniformity of solids within a solids fabrication system, such as a direct light fabrication (DLF) system in which gas entrained powders are passed through the focal point of a moving high-power light which fuses the particles in the powder to a surface being built up in layers. The invention provides a feed through interface wherein gas entrained powders input from stationary input lines are coupled to a rotating head of the fabrication system. The invention eliminates the need to provide additional slack in the feed lines to accommodate head rotation, and therefore reduces feed line bending movements which induce non-uniform feeding of gas entrained powder to a rotating head.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

The Development of an Energy Evaluation Tool for Chilled Water Systems  

E-Print Network (OSTI)

An energy evaluation tool for chilled water systems was developed. This tool quantifies the energy usage of various chilled water systems and typical energy conservation measures that are applied to these systems. It can be used as a screening tool to identify potential areas that can be further examined while only requiring a minimum number of inputs. The tool is useful for analyzing chiller plants with up to three electric chillers consisting of reciprocating, helical rotary, and/or centrifugal chillers. Both air-cooled and water-cooled systems can be analyzed with the tool, however, this article focuses on water-cooled systems. The tool is capable of analyzing the economics of the following energy conservation measures: 1) raising the chilled water temperature, 2) lowering the condenser temperature, 3) replacing the chiller(s), 4) using variable speed drives on centrifugal compressors, 5) utilizing free cooling, and 6) replacing electric chiller(s) with gas engine centrifugal chillers. For each of these measures, the tool calculates the annual energy and cost savings.

Stocki, M.; Kosanovic, D.; Ambs, L.

2001-05-01T23:59:59.000Z

202

Water Boatman  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Boatman Water Boatman Name: Joshua Location: N/A Country: N/A Date: N/A Question: I am doing a research on water boatman. I go through your web, I only find little information about it. Can you give me its habitat, its appearance, life cycles and communication between themselves and they defenses themselves? Replies: Find a good book in the library on insects, also on pond biology/ecology, as boatmen live in ponds and marshes. It should be easy to find. J.Elliott Try this web site: http://www.dnr.state.il.us/ctap.ctaphome.htm or http://www.dnr.state.il.us/nredu/nredpage.htm this is the state of Illinois Dept. of Natural Resources homepage and somewhere on there is a page called "bugpage". They have pictures and characteristics of aquatic insects there. good luck

203

Water Heaters and Hot Water Distribution Systems  

E-Print Network (OSTI)

gas water heaters; and pressure loss calculations for residentialgas water heaters; and pressure loss calculations for residential

Lutz, Jim

2012-01-01T23:59:59.000Z

204

Water Detritiation: Better SCK-CEN Catalysts for Liquid Phase Catalytic Exchange  

SciTech Connect

A technically and economically sound technology for water detritiation is mandatory for the future of fusion. This technology is expected to be based on water electrolysis and Liquid Phase Catalytic Exchange (LPCE). LPCE requires an efficient hydrophobic catalyst. SCK-CEN invented and developed such a catalyst in the past, which is prepared by depositing platinum on an activated charcoal carrier and mixing it with polytetrafluorethylene as a hydrophobic material. In combination with an appropriate wettable packing, different batches of this catalyst performed very well during years of extensive testing, allowing us to develop the ELEX process for water detritiation at inland reprocessing plants. Recently we succeeded in reproducing this catalyst and preparing a slightly different but clearly ameliorated type. By extrapolation these new results would allow us to obtain, at 40 deg. C and under typical but conservative operating conditions, a decontamination factor of 10000 with a column of less than 3 meters long. Such performances would make this catalyst an excellent candidate for application at JET or ITER. To confirm the performances of our improved catalyst for a longer period of time and in a longer column, we are now starting experiments in a newly built installation and we are collaborating with ICSI, Romania.

Bruggeman, Aime; Braet, Johan; Vanderbiesen, Sven [SCK-CEN (Belgium)

2005-07-15T23:59:59.000Z

205

Remapping Inland Southern California: Global Commodity Distribution, Land Speculation, and Politics in the Inland Empire  

E-Print Network (OSTI)

Science 38 (2), 235–244. Beauregard, R. A. (2006). Whenand Molotch (1987), Beauregard (2006), and Walker (2004) ForNicholson-Smith 1991) and (Beauregard 2006). See Lefebvre’

De Lara, Juan David

2009-01-01T23:59:59.000Z

206

Water Heaters and Hot Water Distribution Systems  

E-Print Network (OSTI)

The effect on water and gas usage from cross-flow betweencontrols have on water and gas usage over a large number ofsystems, and their water and gas usage. Hourly schedules for

Lutz, Jim

2012-01-01T23:59:59.000Z

207

Efficient Water Use & Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Goals Water Use Goal 4: Efficient Water Use & Management Aware of the arid climate of northern New Mexico, water reduction and conservation remains a primary...

208

Water and Energy Interactions  

E-Print Network (OSTI)

A white paper describing produced water from production ofCE, Veil JA. 2009. Produced Water Volumes and Managementunderground formations (produced water) are often extracted

McMahon, James E.

2013-01-01T23:59:59.000Z

209

Saving Water Saves Energy  

E-Print Network (OSTI)

of California’s Water Conservation Standards for ResidentialCalifornia Urban Water Conservation Council, 2006. http://http://www.nrdc.org/water/conservation/edrain/edrain.pdf

McMahon, James E.; Whitehead, Camilla Dunham; Biermayer, Peter

2006-01-01T23:59:59.000Z

210

Texas Hot Water Report  

NLE Websites -- All DOE Office Websites (Extended Search)

coil hot water storage tank, a backup instantaneous electric water heater, a hydronic fan coil unit for space heating, and an efficient plumbing manifold for domestic hot water...

211

Water Permits (Louisiana)  

Energy.gov (U.S. Department of Energy (DOE))

The Water Permits Division authorizes permits administered under the Water Quality Regulations. Louisiana's Water Quality Regulations require permits for the discharge of pollutants from any point...

212

Water Beetles  

NLE Websites -- All DOE Office Websites (Extended Search)

Beetles Beetles Nature Bulletin No. 639-A April 29, 1961 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis Supt. of Conservation WATER BEETLES The world is full of beetles. They live everywhere except in the oceans and in the polar regions. There are more of them than any other kind of insect. A quarter of a million species are known and new ones are being discovered every year. Whether it is a microscopic mushroom beetle a hundredth of an inch long, or a giant six-inch Hercules beetle from South America, it can be recognized by its wings. The upper pair forms a hard shell curving like a shield over the thin folded lower wings and the abdomen. In flight, the upper pair is extended like the wings of an airplane and the lower two become buzzing propellers.

213

Water watch  

Science Conference Proceedings (OSTI)

The Hydropower Generation Report provides generation figures for the largest hydropower producers in each of six regions in the US. The report compares, for each month, the amount of hydroelectricity generated (in thousands of megawatt-hours) by each producers in the last two years to the ten-year average for that month. This database is used to figure long-term generation averages and percent of averages. The producers regularly provide current generation data to update the database. This issue of [open quotes]Water Watch[close quotes] focuses on winter snow conditions across the US as of mid-January. In addition, the department provides an outlook of spring flood potential. The information presented is based on data from the US Geological Survey, the National Weather Service, and the Soil Conservation Service.

Not Available

1991-02-01T23:59:59.000Z

214

Water Conservation Tips  

E-Print Network (OSTI)

Gardener Water Conservation Tips fo r t h e UCSC Farm &share some of the water-conservation techniques used at theWinter Squash Water Conservation Mulches will save water,

Brown, Martha

2008-01-01T23:59:59.000Z

215

Drinking Water Problems: Lead  

E-Print Network (OSTI)

Lead in drinking water can damage the brain, kidneys, nervous system and red blood cells. This publication explains how lead can enter drinking water, how to have your water tested, and how to eliminate lead from drinking water.

Dozier, Monty; McFarland, Mark L.

2004-02-20T23:59:59.000Z

216

Water Conservation Tips  

E-Print Network (OSTI)

Gardener Water Conservation Tips fo r t h e UCSC Farm &we share some of the water-conservation techniques used atWinter Squash Water Conservation Mulches will save water,

Brown, Martha

2008-01-01T23:59:59.000Z

217

NIST: NIF - Water Sensitivity  

Science Conference Proceedings (OSTI)

Water Sensitivity. Neutrons are extremely sensitive to small amounts of water. To quantify and calibrate this sensitivity we ...

218

Conventional Storage Water Heaters  

Energy.gov (U.S. Department of Energy (DOE))

Conventional storage water heaters remain the most popular type of water heating system for homes and buildings.

219

ARM: Microwave Radiometer data (MWR Profiles - QME), water vapor, temp, cloud liquid water, precip water retrievals  

DOE Data Explorer (OSTI)

Microwave Radiometer data (MWR Profiles - QME), water vapor, temp, cloud liquid water, precip water retrievals

Maria Cadeddu

220

WATER AND GROWTH: FUTURE WATER SUPPLIES FOR  

E-Print Network (OSTI)

. Reclaimed Water As people use water, a wastewater stream is produced. Once cleaned to acceptable standards and is available as reclaimed water. #12;20 New growth in central Arizona will produce significant quantities to return for wastewater treatment51 . Of the reclaimed water produced, 30% is assumed available to meet

Gelt, Joe

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Partnering to Save Water  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Partnering Partnering to Save Water Phill Consiglio Southern California Edison What We Are Going to Discuss * A Little Bit About Water * The Energy Cost of Water * Water Technologies * What We Have Done * Where We Are Going A Little Bit About Water *The Earth Has A Finite Supply Of Fresh Water. - Water Is Stored In Aquifers, Surface Waters And The Atmosphere - Sometimes Oceans Are Mistaken For Available Water, But The Amount Of Energy Needed To Convert Saline Water To Potable Water Is Prohibitive Today *This Has Created A Water Crisis Due To: - Inadequate Access To Safe Drinking Water For About 884 Million People - Inadequate Access To Water For Sanitation And Waste Disposal For 2.5 Billion People - Groundwater Overdrafting (Excessive Use) Leading To Diminished Agricultural Yields

222

Water Heaters and Hot Water Distribution Systems  

E-Print Network (OSTI)

Water Distribution System Recommendations for the 2008 Title- 24 Residential Building Energy Efficiency Standards .. 4 Multi-FamilyWater Distribution System Recommendations for the 2008 Title- 24 Residential Building Energy Efficiency Standards 11 Multi-FamilyWater Distribution System Recommendations for the 2008 Title- 24 Residential Building Energy Efficiency Standards 48 Multi-Family

Lutz, Jim

2012-01-01T23:59:59.000Z

223

Water heater heat reclaimer  

SciTech Connect

This invention relates to the conservation of energy in a domestic gas water heater by utilizing the hot exhaust gases in a gas water heater for the preheating of the incoming unheated water into the water heater. The exhaust gases from a domestic gas water heater carry wasted heat and the present invention provides a mean to reclaim part of the wasted heat for the preheating of the incoming unheated water during hot water usage periods. During non hot water usage periods the heat in the exhaust gases is not reclaimed to prevent overheating of the water and also to prevent the formation of water deposit in the preheating assembly or heat reclaimer. During the non hot water usage periods the heat produced in the water heater is normally needed only to maintain the desired water temperature of the stored water in the water tank of the water heater. Due to the rapid heating or recovery rate, the present invention enables the use of a smaller water heater. The use of a smaller water heater reduces the normal heat loss from the stored hot water thereby further reduces energy consumption.

Wie, C.T.

1983-08-09T23:59:59.000Z

224

Feature - WATER Tool Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Assessment for Transportation Energy Resources (WATER) Tool Released Water Assessment for Transportation Energy Resources (WATER) Tool Released Argonne National Laboratory recently released an open access online tool called WATER (Water Assessment for Transportation Energy Resources), which quantifies water footprint of fuel production stages from feedstock production to conversion process for biofuel with county, state, and regional level spatial resolution. WATER provides analysis on water consumption and its impact on water quality. It contains biofuel pathways for corn grain ethanol, soybean biodiesel, and cellulosic ethanol produced from corn stover and wheat straw. Perennial grass (Switchgrass and Miscanthus) and forest wood residue-based biofuel pathways are currently under development. The WATER tool enables users to conduct pathway comparison, scenario development, and regional specific feedstock analysis in supporting of biofuel industry development and planning. It is available at http://water.es.anl.gov/.

225

Tankless Demand Water Heaters  

Energy.gov (U.S. Department of Energy (DOE))

Demand (tankless or instantaneous) water heaters have heating devices that are activated by the flow of water, so they provide hot water only as needed and without the use of a storage tank. They...

226

Review: Globalization of Water  

E-Print Network (OSTI)

Review: Globalization of Water: Sharing the Planet’sAshok K. Globalization of Water: Sharing the Planet’s140) liters of virtual water (p. 15). This is one of the

Tennant, Matthew Aaron

2009-01-01T23:59:59.000Z

227

Saving Water Saves Energy  

E-Print Network (OSTI)

H. , Groves D. California Water 2030: An Efficient Future,Preemption of California’s Water Conservation Standards for2Epdf Biermayer P. Potential Water and Energy Savings from

McMahon, James E.; Whitehead, Camilla Dunham; Biermayer, Peter

2006-01-01T23:59:59.000Z

228

Water, Water Everywhere: How Can We Understand It?  

Science Conference Proceedings (OSTI)

... Science Afternoon. Water, Water Everywhere: How Can We Understand It? An exploration of water using physical models and computer simulation. ...

2012-10-01T23:59:59.000Z

229

Water Rx - The Problem of Pharmaceuticals in Our Nation's Waters  

E-Print Network (OSTI)

IN OUR NATION'S WATERS intake via drinking water wastherapeutic dose and intake via drinking water was 150,000

Leitman, Melanie

2011-01-01T23:59:59.000Z

230

Drinking Water Standards  

E-Print Network (OSTI)

This publication explains the federal safety standards for drinking water provided by public water supply systems. It discusses the legal requirements for public water supplies, the maximum level allowed for contaminants in the water, and the potential health effects of each contaminant regulated. People who use water from private sources such as wells can also use these standards as a guide in checking whether their water is safe.

Dozier, Monty; McFarland, Mark L.

2006-04-26T23:59:59.000Z

231

Carbon and Water Resource Management for Water Distribution Systems  

E-Print Network (OSTI)

4 April, 2013. (4) 2010 Water Use Survey Summary Estimates –State Totals; Texas Water Development Board: Austin, TX,indicators for urban water systems. Urban Water. 2004, 4,

Hendrickson, Thomas Peter

2013-01-01T23:59:59.000Z

232

Ultraviolet Water Treatment  

Science Conference Proceedings (OSTI)

UV Ray of Hope for Safer Drinking Water. ... It is not, however, too soon for the American Water Works Association to express its appreciation. ...

2013-01-03T23:59:59.000Z

233

NETL: Water - Energy Interface  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Water - Energy Interface Innovations for Existing Plants Water - Energy Interface Previous Next...

234

Membranes for Clean Water  

Science Conference Proceedings (OSTI)

Membranes for Clean Water. Summary: ... Description: Impact. Access to affordable, clean water is vital to the nation's economic growth and security. ...

2013-02-02T23:59:59.000Z

235

Drinking Water Problems: Copper  

E-Print Network (OSTI)

High levels of copper in drinking water can cause health problems. This publication explains the effects of copper in water and methods of removing it. 4 pp.

Dozier, Monty; McFarland, Mark L.; Lesikar, Bruce J.

2006-01-25T23:59:59.000Z

236

Water and Energy Interactions  

E-Print Network (OSTI)

water and wasted embodied energy. While 5% of California'senergy intensive (94). Water- inefficient fixtures and fittings (toilets, showerheads, urinals, faucets) represent both wasted

McMahon, James E.

2013-01-01T23:59:59.000Z

237

Review: Globalization of Water  

E-Print Network (OSTI)

using virtual water (e.g. coffee produced in an environmentis produced in an environment in which it takes less water

Tennant, Matthew Aaron

2009-01-01T23:59:59.000Z

238

Water-heating dehumidifier  

DOE Patents (OSTI)

A water-heating dehumidifier includes a refrigerant loop including a compressor, at least one condenser, an expansion device and an evaporator including an evaporator fan. The condenser includes a water inlet and a water outlet for flowing water therethrough or proximate thereto, or is affixed to the tank or immersed into the tank to effect water heating without flowing water. The immersed condenser design includes a self-insulated capillary tube expansion device for simplicity and high efficiency. In a water heating mode air is drawn by the evaporator fan across the evaporator to produce cooled and dehumidified air and heat taken from the air is absorbed by the refrigerant at the evaporator and is pumped to the condenser, where water is heated. When the tank of water heater is full of hot water or a humidistat set point is reached, the water-heating dehumidifier can switch to run as a dehumidifier.

Tomlinson, John J. (Knoxville, TN)

2006-04-18T23:59:59.000Z

239

Research Addressing Power Plant Water  

NLE Websites -- All DOE Office Websites (Extended Search)

Addressing Power Plant Water Management to Minimize Water Use while Providing Reliable Electricity Generation Water and Energy 2 Water and Energy are inextricably linked. Because...

240

Movement and Injury Rates for Three Life Stages of Spring Chinook Salmon Oncorhynchus Tshawytscha : A Comparison of Submerged Orifices and an Overflow Weir for Fish Bypass in a Modular Rotary Drum Fish Screen : Annual Report 1995.  

DOE Green Energy (OSTI)

The Pacific Northwest National Laboratory (PNNL) evaluated the effectiveness of 6-in. and 2-in. submerged orifices, and an overflow weir for fish bypass at a rotary drum fish screening facility. A modular drum screen built by the Washington Department of Fish and Wildlife (WDFW) was installed at PNNL`s Aquatic Ecology research laboratory in Richland, Washington. Fry, subyearlings, and smolts of spring chinook salmon (Oncorhynchus tshawyacha) were introduced into the test system, and their movement and injury rates were monitored. A total of 33 tests (100 fish per test) that lasted from 24 to 48 hr were completed from 1994 through 1995. Passage rate depended on both fish size and bypass configuration. For fry/fingerling spring chinook salmon, there was no difference in passage rate through the three bypass configurations (2-in. orifice, 6-in. orifice, or overflow weir). Subyearlings moved sooner when the 6-in. orifice was used, with more than 50% exiting through the fish bypass in the first 8 hr. Smolts exited quickly and preferred the 6-in. orifice, with over 90% of the smolts exiting through the bypass in less than 2 hr. Passage was slightly slower when a weir was used, with 90% of the smolts exiting in about 4 hr. When the 2-in. orifice was used in the bypass, 90% of the smolts did not exit until after 8 hr. In addition, about 7% of the smolts failed to migrate from the forebay within 24 hr, indicating that smolts were significantly delayed when the 2-in. orifice was used. Few significant injuries were detected for any of the life stages. However, light descaling occurred on about 15% of chinook salmon smolts passing through the 2-in. orifice. Although a single passage through the orifice did not appear to cause significant scale loss or other damage, passing through several screening facilities with 2-in. orifices could cause cumulative injuries.

Abernethy, C. Scott; Neitzel, Duane A.; Mavros, William V.

1996-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Lawn Water Management  

E-Print Network (OSTI)

Water is a limited resource in Texas. This booklet explains how homeowners can establish a water management program for a home lawn that both maintains a healthy sod and also conserves water. The publication discusses soil types, grass varieties, management practices and watering techniques.

McAfee, James

2006-06-26T23:59:59.000Z

242

WaterSense Program: Methodology for National Water Savings Analysis Model Indoor Residential Water Use  

E-Print Network (OSTI)

Fixtures Market Overview: Water Savings Potential forNew Jersey. American Water Works Association ResearchResidential End Uses of Water (REUWS). 1999. American Water

McNeil, Michael

2008-01-01T23:59:59.000Z

243

Service Water Piping Guideline  

Science Conference Proceedings (OSTI)

In the years 1988 and 1989, EPRI organized the Service Water Working Group (SWWG) to identify and help resolve the many issues surrounding service water (SW) systems in nuclear power plants. One issue identified by the SWWG was corrosion in service water piping systems. Interest in this issue resulted in the development of several technical reports: Guidelines for the Repair/Replacement Welding of Nuclear Service Water Systems, TR-100386; Guide for the Examination of Service Water System Piping, TR-10206...

2005-09-30T23:59:59.000Z

244

Energy Water Linkage: Projected Water Needs  

NLE Websites -- All DOE Office Websites (Extended Search)

June 2004 Executive Summary Thermoelectric generation requires large volumes of water, primarily for cooling. An analysis was conducted to estimate the demand...

245

Engineering Task Plan for Water Supply for RMCS Spray Wash Trailer  

Science Conference Proceedings (OSTI)

This ETP defines the task and deliverables associated with the design, fabrication and testing of an improved spray wash system for the Rotary Mode Core Sampling (RMCS)Spray Wash Trailer.

BOGER, R.M.

2000-04-20T23:59:59.000Z

246

Engineering Task Plan for Water Supply for Spray Washers on the Support Trucks  

SciTech Connect

This Engineering Task Plan (ETP) defines the task and deliverables associated with the design, fabrication and testing of an improved spray wash system for the Rotary Mode Core Sampling (RMCS) System Support Trucks.

BOGER, R.M.

2000-02-03T23:59:59.000Z

247

Reactor water cleanup system  

DOE Patents (OSTI)

A reactor water cleanup system includes a reactor pressure vessel containing a reactor core submerged in reactor water. First and second parallel cleanup trains are provided for extracting portions of the reactor water from the pressure vessel, cleaning the extracted water, and returning the cleaned water to the pressure vessel. Each of the cleanup trains includes a heat exchanger for cooling the reactor water, and a cleaner for cleaning the cooled reactor water. A return line is disposed between the cleaner and the pressure vessel for channeling the cleaned water thereto in a first mode of operation. A portion of the cooled water is bypassed around the cleaner during a second mode of operation and returned through the pressure vessel for shutdown cooling.

Gluntz, Douglas M. (San Jose, CA); Taft, William E. (Los Gatos, CA)

1994-01-01T23:59:59.000Z

248

Instantaneous gas water heater  

SciTech Connect

Hot water supply temperature is set by a temperature setting device in response to an instantaneous flow rate signal from a water flow rate sensor arranged in a water supply pipe and a feeding water temperature signal from a feeding water temperature sensor which are compared with a predetermined hot water supply temperature and calculated in a control unit. A proportional valve and other devices in a gas supply pipe are controlled in response to the result of the comparison and calculation to define a required volume of gas for ignition and heating. At the same time, a fan damper is controlled by a damper control device so as to adjust the volume of combustion air. A signal representing discharging hot water temperature from a discharging hot water temperature sensor arranged in a hot water feeding pipe is fed back to the control unit and calculated therein, and a valve in the hot water supply pipe is adjusted in response to the result of calculation to attain the desired hot water supply temperature. In order to prevent freezing in the system in winter season, a signal from a thermostat in the water feeding pipe is transmitted to a heater arranged in an air supply chamber so as to heat a heat exchanger pipe and, at the same time, heaters arranged in the water feeding pipe and the hot water supply pipe are also controlled to prevent freezing.

Tsutsui, O.; Kuwahara, H.; Murakami, Sh.; Yasunaga, Sh.

1985-02-26T23:59:59.000Z

249

Arnold Schwarzenegger WATER HEATERS AND HOT WATER  

E-Print Network (OSTI)

controls. This response applies to markets that have a demand for central water heating systems Distribution Systems Subtask 2.1 Multifamily Water Heating Construction Practices, Pricing and Availability systems in multifamily buildings. This market characterization study is helping HMG develop

250

ii Produced Water Pretreatment for Water Recovery  

E-Print Network (OSTI)

Horizontal drilling and slickwater hydrofracturing have enabled shale gas to become a significant contributor to the United States ’ energy supply. Hydrofracturing typically requires 2MM – 6.5MM gallons of water per shale gas well. About 15-25 % of this water returns to the surface as “flowback ” within 30 days after hydrofracturing. “Produced water ” continues to flow at a much reduced rate, e.g. 2-10 bbl/day, for the life of the well. In addition to high salinity and hardness levels (Mg, Ca, Sr, Ba), much Marcellus produced water also contains significant levels of naturally occurring radioactive materials (NORM), particularly radium. The near absence of disposal wells in Pennsylvania initially forced much of the produced water to be trucked into Ohio for disposal by deep-well injection (UIC). Currently up to 95 % of the

Principal Investigator; James M. Silva; James M. Silva; Hope Matis; William L. Kostedt Iv; Vicki Watkins

2012-01-01T23:59:59.000Z

251

Energy-Water Overview  

U.S. Energy Information Administration (EIA) Indexed Site

Emerging Issues and Challenges Emerging Issues and Challenges DOE/EIA 2010 Energy Conference Mike Hightower Sandia National Laboratories mmhight@sandia.gov, 505-844-5499 Energy and Water are ... Interdependent Water for Energy and Energy for Water Energy and power production require water: * Thermoelectric cooling * Hydropower * Energy minerals extraction/mining * Fuel Production (fossil fuels, H 2 , biofuels) * Emission control Water production, processing, distribution, and end-use require energy: * Pumping * Conveyance and Transport * Treatment * Use conditioning * Surface and Ground water Water Consumption by Sector U.S. Freshwater Consumption, 100 Bgal/day Livestock 3.3% Thermoelectric 3.3% Commercial 1.2% Domestic 7.1% Industrial 3.3% Mining 1.2% Irrigation 80.6% Energy uses 27 percent of all non-agricultural fresh water

252

Water Management Planning  

NLE Websites -- All DOE Office Websites (Extended Search)

water efficiency water efficiency at Federal sites Background The Federal Energy Management Program (FEMP) sponsored a water assessment at the Y-12 National Security Complex (Y-12) located in Oak Ridge, Tennessee, during fiscal year 2010. Driven by mandated water reduction goals of Executive Orders 13423 and 13514, the objective of the water assessment was to develop a comprehensive understanding of the current water-consuming applications and equipment at Y-12 and to identify key areas for water efficiency improvements. The water-assessment team learned key lessons from the Y-12 assessment. Therefore, the aim of this document is to share these key lessons to help other large process-driven sites at the Department of Energy (DOE) and beyond develop a comprehensive

253

Water Management Planning  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

water efficiency water efficiency at Federal sites Background The Federal Energy Management Program (FEMP) sponsored a water assessment at the Y-12 National Security Complex (Y-12) located in Oak Ridge, Tennessee, during fiscal year 2010. Driven by mandated water reduction goals of Executive Orders 13423 and 13514, the objective of the water assessment was to develop a comprehensive understanding of the current water-consuming applications and equipment at Y-12 and to identify key areas for water efficiency improvements. The water-assessment team learned key lessons from the Y-12 assessment. Therefore, the aim of this document is to share these key lessons to help other large process-driven sites at the Department of Energy (DOE) and beyond develop a comprehensive

254

Water | OpenEI  

Open Energy Info (EERE)

Water Water Dataset Summary Description This dataset is from the report Operational water consumption and withdrawal factors for electricity generating technologies: a review of existing literature (J. Macknick, R. Newmark, G. Heath and K.C. Hallett) and provides estimates of operational water withdrawal and water consumption factors for electricity generating technologies in the United States. Estimates of water factors were collected from published primary literature and were not modified except for unit conversions. Source National Renewable Energy Laboratory Date Released August 28th, 2012 (2 years ago) Date Updated Unknown Keywords coal consumption csp factors geothermal PV renewable energy technologies Water wind withdrawal Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon Operational water consumption and withdrawal factors for electricity generating technologies (xlsx, 77.7 KiB)

255

Report on Produced Water  

NLE Websites -- All DOE Office Websites (Extended Search)

water is the largest volume by-product or waste stream associated with oil and gas exploration and production. The cost of managing such a large volume of water is a key...

256

Boiling Water in Microwave  

NLE Websites -- All DOE Office Websites (Extended Search)

Boiling Water in Microwave A 26-year old man decided to have a cup of coffee. He took a cup of water and put it in the microwave to heat it up (something that he had done numerous...

257

A gathering of water  

E-Print Network (OSTI)

The act of immersion is a powerful catalyst for the affirmation or transformation of identity. How we place ourselves in water expresses cultural valuations of our bodies, water, and social relations, as well as categories ...

Horowitz, Naomi Leah, 1970-

2005-01-01T23:59:59.000Z

258

Walking on water  

E-Print Network (OSTI)

The ingenious methods employed by insects and spiders to move across a water surface rely on microphysics that is of little use to larger water walkers but of considerable interest to the microfluidics community.

Bush, John W. M.

259

Madrid Hot Water Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Comprehensive Assessment of Hot Water System Page 1 of 2 HOT WATER SYSTEM In general, the plumbing system in MAGIC BOX is designed to concentrate all devices, be they storage,...

260

Water Conservation Tips  

E-Print Network (OSTI)

Water Needs breath. Adding compost to sandy soils helps thesoil retain water longer—the compost acts like a sponge,from applications of compost and other organic matter. For

Brown, Martha

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Drinking Water Problems: Arsenic  

E-Print Network (OSTI)

High levels of arsenic in drinking water can poison and even kill people. This publication explains the symptoms of arsenic poisoning and common treatment methods for removing arsenic from your water supply.

Lesikar, Bruce J.; Melton, Rebecca; Hare, Michael; Hopkins, Janie; Dozier, Monty

2005-12-02T23:59:59.000Z

262

Water Prism Volume 1  

Science Conference Proceedings (OSTI)

This report documents the design and implementation of Water Prism, a decision support system that evaluates alternative management plans to obtain water resource sustainability at the regional, watershed or local levels. It considers surface, ground and impoundment waters, and all water using sectors (industrial, agricultural, municipal, electric power and the environment). This report will be of value to environment, generation, and planning managers within power companies, government agencies, ...

2012-12-06T23:59:59.000Z

263

Demystifying water treatment  

SciTech Connect

Increasingly accountable for the environmental quality and cost of managing their waste and process water streams, customers require more precise data about the constituents in their water. This has forced suppliers to unlock some of the secrets of water treatment. In the open exchange of information, users are trading in esoteric formulations for products that are more chemical efficient and environmentally benign. Factoring more prominently in the water treatment equation are service and supply. This paper reviews some of these simpler treatments.

Hairston, D.

1994-09-01T23:59:59.000Z

264

Water and Energy Interactions  

E-Print Network (OSTI)

History 4 Water Used For Fuel Production.. 4 Coal Production .. 6 Carbon Capture and Sequestration .. 7 Natural Gas

McMahon, James E.

2013-01-01T23:59:59.000Z

265

Water and Energy Interactions  

E-Print Network (OSTI)

Hydroelectricity for agriculture and hydroelectricity. Large volumes of waterElectricity Production Hydroelectricity The most common type

McMahon, James E.

2013-01-01T23:59:59.000Z

266

What's In My Water?  

E-Print Network (OSTI)

You can learn about the quality of your water by sending a sample to a laboratory for analysis. This publication will help you understand the lab report by explaining the properties, components and contaminants often found in water. It describes the sources of water contaminants, problems that can be caused by those contaminants, suggestions for correcting problems, and the safe levels of each contaminant in water for household use, for irrigation and for livestock.

Provin, Tony; Pitt, John L.

2003-04-21T23:59:59.000Z

267

Saving Water Saves Energy  

SciTech Connect

Hot water use in households, for showers and baths as wellas for washing clothes and dishes, is a major driver of household energyconsumption. Other household uses of water (such as irrigatinglandscaping) require additional energy in other sectors to transport andtreat the water before use, and to treat wastewater. In California, 19percent of total electricity for all sectors combined and 32 percent ofnatural gas consumption is related to water. There is a criticalinterdependence between energy and water systems: thermal power plantsrequire cooling water, and water pumping and treatment require energy.Energy efficiency can be increased by a number of means, includingmore-efficient appliances (e.g., clothes washers or dishwashers that useless total water and less heated water), water-conserving plumbingfixtures and fittings (e.g., showerheads, faucets, toilets) and changesin consumer behavior (e.g., lower temperature set points for storagewater heaters, shorter showers). Water- and energy-conserving activitiescan help offset the stress imposed on limited water (and energy) suppliesfrom increasing population in some areas, particularly in drought years,or increased consumption (e.g., some new shower systems) as a result ofincreased wealth. This paper explores the connections between householdwater use and energy, and suggests options for increased efficiencies inboth individual technologies and systems. Studies indicate that urbanwater use can be reduced cost-effectively by up to 30 percent withcommercially available products. The energy savings associated with watersavings may represent a large additional and largely untappedcost-effective opportunity.

McMahon, James E.; Whitehead, Camilla Dunham; Biermayer, Peter

2006-06-15T23:59:59.000Z

268

Energy-Water Nexus  

SciTech Connect

Conclusions of this presentation are: (1) energy and water are interconnected; (2) new energy sources will place increased demands on water supplies; (3) existing energy sources will be subjected to increasing restrictions on their water use; and (4) integrated decision support tools will need to be developed to help policy makers decide which policies and advanced technologies can address these issues.

Horak, W.

2010-07-26T23:59:59.000Z

269

Corrosion in Water  

Science Conference Proceedings (OSTI)

Table 1   Corrosion of chemical lead in industrial and domestic waters...ppm hardness 22 72 Yes Slow 6.35 0.25 Cooling tower water, oxygenated, from Lake Erie 16â??29 60â??85 Complete None 134.6 5.3 Los Angeles aqueduct water, treated with chlorine

270

Water treatment method  

DOE Patents (OSTI)

A method for reducing the concentration of any undesirable metals dissolved in contaminated water, such as waste water. The method involves uniformly reacting the contaminated water with an excess amount of solid particulate calcium sulfite to insolubilize the undesirable metal ions, followed by removal thereof and of the unreacted calcium sulfite.

Martin, Frank S. (Farmersville, OH); Silver, Gary L. (Centerville, OH)

1991-04-30T23:59:59.000Z

271

Water treatment on wheels  

Science Conference Proceedings (OSTI)

Design options and combinations of fixed and mobile demineralization equipment give power plant operators the flexibility to continually optimize their water treatment system to meet rapidly changing needs. The article classifies water treatment service contracts for demineralized water into four categories and presents associated design, economic and operational advantages to power plant designers, constructors, owners and operators. 1 tab.

Taylor, R.T.

2005-09-01T23:59:59.000Z

272

Water treatment method  

DOE Patents (OSTI)

A method for reducing the concentration of many undesirable metals dissolved in contaminated water, such as waste water. The method involves uniformly reacting the contaminated water with an excess amount of solid particulate calcium sulfite to insolubilize the undesirable metal ions, followed by removal thereof and of the unreacted calcium sulfite. 1 tab.

Martin, F.S.; Silver, G.L.

1990-02-02T23:59:59.000Z

273

Drinking Water Problems: Radionuclides  

E-Print Network (OSTI)

Radionuclides in drinking water can cause serious health problems for people. This publication explains what the sources of radionuclides in water are, where high levels have been found in Texas, how they affect health and how to treat water to remove them.

Lesikar, Bruce J.; Melton, Rebecca; Hare, Michael; Hopkins, Janie; Dozier, Monty

2006-08-04T23:59:59.000Z

274

Reduction of Water Consumption  

E-Print Network (OSTI)

Cooling systems using water evaporation to dissipate waste heat, will require one pound of water per 1,000 Btu. To reduce water consumption, a combination of "DRY" and "WET" cooling elements is the only practical answer. This paper reviews the various options available: WET-DRY towers, or DRY-WET, or combination WET and DRY towers!

Adler, J.

1985-05-01T23:59:59.000Z

275

Water treatment method  

DOE Patents (OSTI)

A method is described for reducing the concentration of any undesirable metals dissolved in contaminated water, such as waste water. The method involves uniformly reacting the contaminated water with an excess amount of solid particulate calcium sulfite to insolubilize the undesirable metal ions, followed by removal thereof and of the unreacted calcium sulfite.

Martin, F.S.; Silver, G.L.

1991-04-30T23:59:59.000Z

276

Division of Water, Part 675: Great Lakes Water Withdrawal Registration...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

75: Great Lakes Water Withdrawal Registration Regulations (New York) Division of Water, Part 675: Great Lakes Water Withdrawal Registration Regulations (New York) Eligibility...

277

Carbon and Water Resource Management for Water Distribution Systems  

E-Print Network (OSTI)

5 March 2013. (12) Water Conservation Master Plan; East Baywww.ebmud.com/for-customers/water-conservation- rebates-and-services/water-conservation-master-plan, accessed 15

Hendrickson, Thomas Peter

2013-01-01T23:59:59.000Z

278

Water-Miscible (Water-Soluble) Fluids  

Science Conference Proceedings (OSTI)

...the growth of microorganisms such as bacteria, algae, and fungi. If disposal is of no concern, phenolics can be used. The soaps, wetting agents, and couplers used as emulsifiers in water-miscible fluids reduce surface

279

Water News | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water News Water News Bioenergy Buildings Geothermal Government Energy Management Homes Hydrogen & Fuel Cells Advanced Manufacturing Solar Vehicles Water Wind Blog Archive Recent...

280

The economic conception of water  

E-Print Network (OSTI)

American City: municipal water supply investments. Ph. D.A . (2004). Boosting Water Productivity. In: Worldwatch1975). Issues in Village Water Supply. Washington, D . C ,

Hanemann, W. Michael

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Planning Water Use in California  

E-Print Network (OSTI)

the University of Maryland Water Policy Collaborative, 2006.FURTH ER READ ING California Department of Water Resources.California Water Plan Update 2005: A Framework for Action.

Eisenstein, William; Kondolf, G. Mathias

2008-01-01T23:59:59.000Z

282

Par Pond water balance  

SciTech Connect

A water budget for the Par Pond hydrologic system was established in order to estimate the rate of groundwater influx to Par Pond. This estimate will be used in modeling exercises to predict Par Pond reservoir elevation and spillway discharge in the scenario where Savannah River water is no longer pumped and discharged into Par Pond. The principal of conservation of mass was used to develop the water budget, where water inflow was set equal to water outflow. Components of the water budget were identified, and the flux associated with each was determined. The water budget was considered balanced when inflow and outflow summed to zero. The results of this study suggest that Par Pond gains water from the groundwater system in the upper reaches of the reservoir, but looses water to the groundwater system near the dam. The rate of flux of groundwater from the water table aquifer into Par Pond was determined to be 13 cfs. The rate of flux from Par Pond to the water table aquifer near the dam was determined to be 7 cfs.

Hiergesell, R.A.; Dixon, K.L.

1996-06-01T23:59:59.000Z

283

Water Heating | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Heating Water Heating Water Heating Infographic: Water Heaters 101 Everything you need to know about saving money on water heating costs Read more Selecting a New Water Heater Tankless? Storage? Solar? Save money on your water heating bill by choosing the right type of energy-efficient water heater for your needs. Read more Sizing a New Water Heater When buying a new water heater, bigger is not always better. Learn how to buy the right size of water heater. Read more You can reduce your monthly water heating bills by selecting the appropriate water heater for your home or pool and by using some energy-efficient water heating strategies. Some simple do-it-yourself projects, like insulating hot water pipes and lowering your water heating temperature, can also help you save money and energy on your water heating.

284

Water Data Report: An Annotated Bibliography  

E-Print Network (OSTI)

Table 5: Public supply water withdrawals, 2000. water withdrawals, 2000. water withdrawals, 2000.

Dunham Whitehead, Camilla; Melody, Moya

2007-01-01T23:59:59.000Z

285

Water Heating | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Heating Water Heating August 19, 2013 - 11:15am Addthis A variety of systems are available for water heating in homes and buildings. Learn about: Conventional Storage Water...

286

Virginia Tech Hot Water Report  

NLE Websites -- All DOE Office Websites (Extended Search)

The team chose to use a water-to-water heat pump (WWHP) connected to an earth coupled heat exchanger to provide water heating. This system provides not only domestic hot water...

287

Water | OpenEI Community  

Open Energy Info (EERE)

Water Home Water Power Forum Description: Forum for information related to the Water Power Gateway The Water Power Community Forum provides you with a way to engage with other...

288

Stabilizing geometry for hydrodynamic rotary seals  

DOE Patents (OSTI)

A hydrodynamic sealing assembly including a first component having first and second walls and a peripheral wall defining a seal groove, a second component having a rotatable surface relative to said first component, and a hydrodynamic seal comprising a seal body of generally ring-shaped configuration having a circumference. The seal body includes hydrodynamic and static sealing lips each having a cross-sectional area that substantially vary in time with each other about the circumference. In an uninstalled condition, the seal body has a length defined between first and second seal body ends which varies in time with the hydrodynamic sealing lip cross-sectional area. The first and second ends generally face the first and second walls, respectively. In the uninstalled condition, the first end is angulated relative to the first wall and the second end is angulated relative to the second wall. The seal body has a twist-limiting surface adjacent the static sealing lip. In the uninstalled condition, the twist-limiting surface is angulated relative to the peripheral wall and varies along the circumference. A seal body discontinuity and a first component discontinuity mate to prevent rotation of the seal body relative to the first component.

Dietle, Lannie L. (Houston, TX); Schroeder, John E. (Richmond, TX)

2010-08-10T23:59:59.000Z

289

Rotary steerable motor system for underground drilling  

Science Conference Proceedings (OSTI)

A preferred embodiment of a system for rotating and guiding a drill bit in an underground bore includes a drilling motor and a drive shaft coupled to drilling motor so that drill bit can be rotated by the drilling motor. The system further includes a guidance module having an actuating arm movable between an extended position wherein the actuating arm can contact a surface of the bore and thereby exert a force on the housing of the guidance module, and a retracted position.

Turner, William E. (Durham, CT); Perry, Carl A. (Middletown, CT); Wassell, Mark E. (Kingwood, TX); Barbely, Jason R. (Middletown, CT); Burgess, Daniel E. (Middletown, CT); Cobern, Martin E. (Cheshire, CT)

2010-07-27T23:59:59.000Z

290

Continuous Flow Differential Pressure Rotary Transport ...  

This patent-pending active material transport system design concept provides solutions to several process challenges associated with moving materials ...

291

34th annual reed rotary rig census  

SciTech Connect

This article reports that the number of rigs active according to the 1986 census is 1052, which represents a decline of 1573 rigs from 1985 figures. This 60 percent decrease is the largest decline of active rigs in the 34-year history of the census. The 1986 census takers found 3993 rigs are available with the capacity to drill deeper than 3000 ft. The count has thus declined by 416 rigs (9 percent) from the 1985 total of 4409. Rig availability declined for the fourth consecutive year following nine straight years of fleet expansion (1974-1982). During the past four years, 1651 rigs have been removed from the drilling fleet representing a 29 percent decline from the record high number of rigs available in 1982. The 1986 decline in the available U.S. fleet is considerably less than what many industry observers had been anticipating. A larger decrease in the rig fleet has not been realized for a number of reasons.

Hutchinson, D.L.; Pastusek, P.E.

1986-10-01T23:59:59.000Z

292

Publicly Submitted White Papers - Water  

Science Conference Proceedings (OSTI)

*. Bookmark and Share. Water. Advanced ... Strategies; AQUEOUS PHASE MERCURY REMOVAL: Strategies for a Secure Future Water Supply; ...

2012-08-01T23:59:59.000Z

293

Suppressant:Water & Aqueous Solutions  

Science Conference Proceedings (OSTI)

Suppressant:Water & Aqueous Solutions. ... Reuther, JJ; 1991. Fine Water Sprays for Fire Protection: A Halon Replacement Option.. ...

2011-10-28T23:59:59.000Z

294

Solar Water Heating  

NLE Websites -- All DOE Office Websites (Extended Search)

publication provides basic informa- publication provides basic informa- tion on the components and types of solar water heaters currently available and the economic and environmental benefits of owning a system. Although the publica- tion does not provide information on building and installing your own system, it should help you discuss solar water heating systems intelligently with a solar equipment dealer. Solar water heaters, sometimes called

295

Refining District Texas Inland Refinery Net Production of ...  

U.S. Energy Information Administration (EIA)

456: 256: 371: 355: 491: 473: 442: 479: 2011: 362: 357: 409: 461: 490: 454: 501: 474: 450: 483: 443: 453: 2012: 489: 453: 455: 401: 477: 470: 421: 446: 441: 291: 246 ...

296

Inland Power and Light Company - Agricultural Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

equipment (nozzles, gaskets, regulators, sprays, drains, hubs, etc), irrigation motor replacements, and variable frequency drives for small milking machines. Specific...

297

Texas Inland Downstream Processing of Fresh Feed Input  

U.S. Energy Information Administration (EIA)

Process: Area: 2007 2008 2009 2010 2011 2012 View History; Catalytic Reforming : 133: 125: 131: 2010-2012: Catalytic Cracking: 173: 158: 159: 149: 162: 164: 1987-2012 ...

298

Federal Memorandum of Understanding for Hydropower/Federal Inland...  

Open Energy Info (EERE)

of Energy Environmental Protection Agency Federal Energy Regulatory Commission Fish and Wildlife Service Forest Service National Oceanic and Atmospheric Administration...

299

Texas Inland Refinery Net Production - U.S. Energy Information ...  

U.S. Energy Information Administration (EIA)

Distillate Fuel Oil: 61,280: 67,071: 58,800: 61,610: 64,796: 67,355: 2005-2012: 15 ppm Sulfur and under: 54,444: 60,705: ... or Loss ...

300

PADD IV PADD II lakes PADD V - PADD II - inland  

U.S. Energy Information Administration (EIA)

228 U.S. Energy Information Administration Annual Energy Outlook 2013 Regional maps Source Maritime Canada Caribbean PADD V - other PADD II lakes PADD V -

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Texas Inland Refinery District Sulfur Content (Weighted Average ...  

U.S. Energy Information Administration (EIA)

0.75-= No Data Reported; --= Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 3/15/2013:

302

Selecting a new water heater  

SciTech Connect

This fact sheet describes the types of water heaters available (storage water heaters, demand water heaters, heat pump water heaters, tankless coil and indirect water heaters, and solar water heaters). The criteria for selection are discussed. These are capacity, efficiency rating, and cost. A resource list is provided for further information.

NONE

1995-03-01T23:59:59.000Z

303

Water | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

daylighting, passive solar and active solar. They also have an 80 gallon solar hot water heater. | Photo by Dennis Schroeder, National Renewable Energy Laboratory. A guide to...

304

Shield for Water Boiler  

SciTech Connect

Siimplified shielding calculations indicating the proposed design for the water boiler assembly will reduce the radiation at normal operaton to values well below those which are considered tolerable.

Balent, R.

1951-08-08T23:59:59.000Z

305

Saving Water Saves Energy  

E-Print Network (OSTI)

for Consumer Products: California Energy Commission PetitionCLOTHES_WASHERS.PDF> California Energy Commission. ApplianceMapTesting.lasso California Energy Commission, The Water

McMahon, James E.; Whitehead, Camilla Dunham; Biermayer, Peter

2006-01-01T23:59:59.000Z

306

Influence of Water Quality  

Science Conference Proceedings (OSTI)

...BP. Boffardi, Corrosion Inhibitors in the Water Treatment Industry, Corrosion: Fundamentals, Testing, and Protection, Vol 13A, ASM Handbook, ASM International, 2003, p 891â??906...

307

Cooling water distribution system  

DOE Patents (OSTI)

A passive containment cooling system for a nuclear reactor containment vessel. Disclosed is a cooling water distribution system for introducing cooling water by gravity uniformly over the outer surface of a steel containment vessel using an interconnected series of radial guide elements, a plurality of circumferential collector elements and collector boxes to collect and feed the cooling water into distribution channels extending along the curved surface of the steel containment vessel. The cooling water is uniformly distributed over the curved surface by a plurality of weirs in the distribution channels.

Orr, Richard (Pittsburgh, PA)

1994-01-01T23:59:59.000Z

308

ELDON water heater  

SciTech Connect

Experience with the installation of an ELDON water heater in the TLC Services, Inc. laundry facility is reported. Piping diagram and pictures are included. (MHR)

Wood, H.E.

1980-07-18T23:59:59.000Z

309

Water and Energy Interactions  

E-Print Network (OSTI)

technologies integrated with desalination systems. Renew.IC, Soldatos PG. 2008. Water desalination cost literature:review and assessment. Desalination 223(1–3): 448–56 107.

McMahon, James E.

2013-01-01T23:59:59.000Z

310

Water and Energy Interactions  

E-Print Network (OSTI)

oil recovery involves the injection of large quantities ofbarrel of oil equivalent (2). Although large quantities ofvarying, quantities of often low-quality water (2, 32). Oil

McMahon, James E.

2013-01-01T23:59:59.000Z

311

Water and Energy Interactions  

E-Print Network (OSTI)

Nuclear plants use steam turbines, and cooling water asmajority is used for steam-driven turbines, which generatedelectricity using steam engines, gas turbines, or Stirling

McMahon, James E.

2013-01-01T23:59:59.000Z

312

Salty Water Cerenkov Detectors  

E-Print Network (OSTI)

The addition of certain solutes to a water Cerenkov detector will introduce new charge-current channels for the detection of $\

W. C. Haxton

1995-11-28T23:59:59.000Z

313

Wool and Water.  

E-Print Network (OSTI)

?? Wool and Water is a creative work of 36 poems. This collection examines the relationship between the silent and vocal, between the pastoral and… (more)

Frederick, Kira

2009-01-01T23:59:59.000Z

314

Wool and water.  

E-Print Network (OSTI)

??Wool and Water is a creative work of 36 poems. This collection examines the relationship between the silent and vocal, between the pastoral and urban.… (more)

Frederick, Kira.

2009-01-01T23:59:59.000Z

315

UV Treated Water Dangers  

NLE Websites -- All DOE Office Websites (Extended Search)

there are chances of developing cancer or such growth due to radiation on drinking water & it's continuous intake? What are other hazards that may cause problems for human...

316

Supplying Water Social Studies  

NLE Websites -- All DOE Office Websites (Extended Search)

Handbook of Engaged Learning Projects SUPPLYING OUR WATER NEEDS: Africa Project Summary Scenario Student Pages References Index SubjectContent Area: World CulturesSocial Studies...

317

Saving Water Saves Energy  

E-Print Network (OSTI)

Test Procedure for Dishwashers, Federal Register, Vol. 68,e.g. , ,clothes washers or dishwashers that use less totalhes Washers Toilet s Dishwashers Figure 2a. Household Water

McMahon, James E.; Whitehead, Camilla Dunham; Biermayer, Peter

2006-01-01T23:59:59.000Z

318

Water and Energy Interactions  

E-Print Network (OSTI)

produced water into aging oil wells to help maximize oilpores until it reaches oil wells. This process can last forrock formations and reach oil wells. Using both processes,

McMahon, James E.

2013-01-01T23:59:59.000Z

319

OpenEI - Water  

Open Energy Info (EERE)

for years 1989 through 2010 for UT at Austin; specifically, electricity usage (kWh), natural gas usage (Mcf), associated costs. Also provides water consumption for 2005...

320

Water Heating Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heaters Solar Water Heaters Tankless Coil and Indirect Water Heaters Addthis Related Articles Tankless Demand Water Heater Basics Solar Water Heater Basics Heat Pump Water Heater...

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Modeling 18° Water Variability  

Science Conference Proceedings (OSTI)

Variability of 18° Water formation is investigated with an isopycnic-coordinate model of the North Atlantic. A 30-year spinup integration is used as a “control” experiment in which the upper water column in the Sargasso Sea is shown to be in ...

Robert Marsh; Adrian L. New

1996-06-01T23:59:59.000Z

322

Purge water management system  

DOE Patents (OSTI)

A purge water management system for effectively eliminating the production of purge water when obtaining a groundwater sample from a monitoring well. In its preferred embodiment, the purge water management system comprises an expandable container, a transportation system, and a return system. The purge water management system is connected to a wellhead sampling configuration, typically permanently installed at the well site. A pump, positioned with the monitoring well, pumps groundwater through the transportation system into the expandable container, which expands in direct proportion with volume of groundwater introduced, usually three or four well volumes, yet prevents the groundwater from coming into contact with the oxygen in the air. After this quantity of groundwater has been removed from the well, a sample is taken from a sampling port, after which the groundwater in the expandable container can be returned to the monitoring well through the return system. The purge water management system prevents the purge water from coming in contact with the outside environment, especially oxygen, which might cause the constituents of the groundwater to oxidize. Therefore, by introducing the purge water back into the monitoring well, the necessity of dealing with the purge water as a hazardous waste under the Resource Conservation and Recovery Act is eliminated.

Cardoso-Neto, Joao E. (North Augusta, SC); Williams, Daniel W. (Aiken, SC)

1996-01-01T23:59:59.000Z

323

Purge water management system  

DOE Patents (OSTI)

A purge water management system is described for effectively eliminating the production of purge water when obtaining a groundwater sample from a monitoring well. In its preferred embodiment, the purge water management system comprises an expandable container, a transportation system, and a return system. The purge water management system is connected to a wellhead sampling configuration, typically permanently installed at the well site. A pump, positioned with the monitoring well, pumps groundwater through the transportation system into the expandable container, which expands in direct proportion with volume of groundwater introduced, usually three or four well volumes, yet prevents the groundwater from coming into contact with the oxygen in the air. After this quantity of groundwater has been removed from the well, a sample is taken from a sampling port, after which the groundwater in the expandable container can be returned to the monitoring well through the return system. The purge water management system prevents the purge water from coming in contact with the outside environment, especially oxygen, which might cause the constituents of the groundwater to oxidize. Therefore, by introducing the purge water back into the monitoring well, the necessity of dealing with the purge water as a hazardous waste under the Resource Conservation and Recovery Act is eliminated.

Cardoso-Neto, J.E.; Williams, D.W.

1995-01-01T23:59:59.000Z

324

Water Waves and Integrability  

E-Print Network (OSTI)

The Euler's equations describe the motion of inviscid fluid. In the case of shallow water, when a perturbative asymtotic expansion of the Euler's equations is taken (to a certain order of smallness of the scale parameters), relations to certain integrable equations emerge. Some recent results concerning the use of integrable equation in modeling the motion of shallow water waves are reviewed in this contribution.

Rossen I. Ivanov

2007-07-12T23:59:59.000Z

325

Drinking Water Problems: Nitrates  

E-Print Network (OSTI)

High levels of nitrates in drinking water can be harmful for very young infants and susceptible adults. This publication explains how people are exposed to nitrates, what health effects are caused by them in drinking water and how to remove them.

Dozier, Monty; Melton, Rebecca; Hare, Michael; Hopkins, Janie; Lesikar, Bruce J.

2008-03-28T23:59:59.000Z

326

Arkansas Water Resources Center  

E-Print Network (OSTI)

nutrients are available. Blowdown - the water discharged from a boiler or cooling tower to dispose and explains the procedures the owner/operator intends to take to perform assessment monitoring. Attenuation procedures. Equipotential Line - a line in a two-dimensional ground-water flow field such that the total

Soerens, Thomas

327

Water Efficiency Program Prioritization  

NLE Websites -- All DOE Office Websites (Extended Search)

Efficiency Program Efficiency Program Prioritization Federal Energy Management Program Office of Energy Efficiency and Renewable Energy January 2009 Will Lintner (william.lintner@ee.doe.gov) Federal Energy Management The Goal - EO 13423 Beginning in 2008, Federal agencies must reduce water consumption intensity through life- effective measures, relative to the baseline of the agency's water consumption in fiscal year 2007 by 2 percent annually through the end of FY 2015 or 16 percent by the end of FY 2015. 2 Water Use Intensit ty (gal/sqft) Federal Sector Glide-Path to Meeting WUI Reduction Goal 55 50 45 40 35 30 25 20 FY 07 FY 08 FY 09 FY 10 FY 11 FY 12 FY 13 FY 14 FY 15 Total Federal sector FY07 WUI Glide-Path for meeting WUI reduction goal (16%) 3 Next Steps * Compile Water Data FY 2008. The baseline for water

328

INEEL Source Water Assessment  

SciTech Connect

The Idaho National Engineering and Environmental Laboratory (INEEL) covers approximately 890 mi2 and includes 12 public water systems that must be evaluated for Source water protection purposes under the Safe Drinking Water Act. Because of its size and location, six watersheds and five aquifers could potentially affect the INEEL’s drinking water sources. Based on a preliminary evaluation of the available information, it was determined that the Big Lost River, Birch Creek, and Little Lost River Watersheds and the eastern Snake River Plain Aquifer needed to be assessed. These watersheds were delineated using the United States Geologic Survey’s Hydrological Unit scheme. Well capture zones were originally estimated using the RESSQC module of the Environmental Protection Agency’s Well Head Protection Area model, and the initial modeling assumptions and results were checked by running several scenarios using Modflow modeling. After a technical review, the resulting capture zones were expanded to account for the uncertainties associated with changing groundwater flow directions, a thick vadose zone, and other data uncertainties. Finally, all well capture zones at a given facility were merged to a single wellhead protection area at each facility. A contaminant source inventory was conducted, and the results were integrated with the well capture zones, watershed and aquifer information, and facility information using geographic information system technology to complete the INEEL’s Source Water Assessment. Of the INEEL’s 12 public water systems, three systems rated as low susceptibility (EBR-I, Main Gate, and Gun Range), and the remainder rated as moderate susceptibility. No INEEL public water system rated as high susceptibility. We are using this information to develop a source water management plan from which we will subsequently implement an INEEL-wide source water management program. The results are a very robust set of wellhead protection areas that will protect the INEEL’s public water systems yet not too conservative to inhibit the INEEL from carrying out its missions.

Sehlke, Gerald

2003-03-01T23:59:59.000Z

329

Optimization of Chilled Water Systems  

E-Print Network (OSTI)

Chilled water systems are one of the major energy consumers in industrial, commercial, and institutional complexes. The centralization of chilled water systems presents numerous advantages, including simplified controls, reduced installation capacity due to diversity, and consolidated maintenance and operation. Centrally chilled water systems present potential energy and cost savings in the following areas: • Chilled water reset. • Condenser water reset. • Chiller sequencing. • Chilled water storage. • Variable chilled water pumping. The feasibility aspect of the above items will be discussed in this paper.

Gidwani, B. N.

1987-09-01T23:59:59.000Z

330

Pressurized Water Reactor Secondary Water Chemistry Guidelines – Revision 6  

Science Conference Proceedings (OSTI)

State-of-the-art water chemistry programs reduce equipment corrosion and enhance steam generator reliability. A committee of industry experts prepared these revised "Pressurized Water Reactor Secondary Water Chemistry Guidelines" to incorporate the latest field and laboratory data on secondary system corrosion and performance issues. Pressurized water reactor (PWR) operators can use these guidelines to update their secondary water chemistry programs.

2004-12-13T23:59:59.000Z

331

Recent California Water Transfers: Emerging Options in Water  

E-Print Network (OSTI)

IN TRANSFERS Recent years have produced increased interest in the transfer of water and waterRecent California Water Transfers: Emerging Options in Water Management by Jay R. Lund Associate for Environmental and Water Resources Engineering DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING University

Lund, Jay R.

332

Effects of forestry on emission of CO2 from boreal lakes.  

E-Print Network (OSTI)

?? Inland waters have long been neglected in the global carbon cycle. They represent only 2,8% of the land area, but it has come clear… (more)

Larsson, Cecilia

2013-01-01T23:59:59.000Z

333

A Membrane Process for Industrial Water Treatment: From Bench to Pilot Demonstration  

Science Conference Proceedings (OSTI)

A rotary membrane filtration system was used to separate die lubricant from a manufacturing wastewater stream consisting of various oils, hydrocarbons, heavy metals, and silicones. The ultrafiltration membranes reduced organics from initial oil and grease contents by factors of 20 to 25, carbon oxygen demand by 1.5 to 2, and total organic carbon by 0.6, while the biological oxygen demand remained constant. The rotary membranes were not fouled as badly as static membranes, and the rotary membrane flux levels were consistently higher and more stable than those of the static membranes tested. Field testing demonstrated that the rotary ultrafilter can concentrate the die lubricant, remove the glycerin component, and produce a die lubricant suitable for in-plant recycling. The recycling system operated for 6 weeks with only seven cleaning cycles and no mechanical or electrical failures. Test data and quality records indicate that when recycled die lubricant was used, the die casting scrap was reduced from 8.4 to 7.8%. Rotary ultrafiltration presents significant opportunities that can be evaluated further.

Eric S. Peterson; Bill Cleary; Michael Hackett; Jessica Trudeau

2005-01-01T23:59:59.000Z

334

WATER-TRAPPED WORLDS  

Science Conference Proceedings (OSTI)

Although tidally locked habitable planets orbiting nearby M-dwarf stars are among the best astronomical targets to search for extrasolar life, they may also be deficient in volatiles and water. Climate models for this class of planets show atmospheric transport of water from the dayside to the nightside, where it is precipitated as snow and trapped as ice. Since ice only slowly flows back to the dayside upon accumulation, the resulting hydrological cycle can trap a large amount of water in the form of nightside ice. Using ice sheet dynamical and thermodynamical constraints, I illustrate how planets with less than about a quarter the Earth's oceans could trap most of their surface water on the nightside. This would leave their dayside, where habitable conditions are met, potentially dry. The amount and distribution of residual liquid water on the dayside depend on a variety of geophysical factors, including the efficiency of rock weathering at regulating atmospheric CO{sub 2} as dayside ocean basins dry up. Water-trapped worlds with dry daysides may offer similar advantages as land planets for habitability, by contrast with worlds where more abundant water freely flows around the globe.

Menou, Kristen [Department of Astronomy, Columbia University, 550 West 120th Street, New York, NY 10027 (United States)

2013-09-01T23:59:59.000Z

335

The politics of water  

Science Conference Proceedings (OSTI)

Wars have been waged over oil and gold, but it is water that now poses the greatest potential for provoking conflict among nations-and the greatest need for new guarantees of cooperation. Athough water is a renewable resource, it is also a finite one. Nearly 40 percent of the world's population depends on river systems shared by two or more countries, leading to political hot spots, most critically in the middle east. This article describes in detail the water problems in the middle east, starting with the Jordan River basin, the Golan Heights, and the coastal aquifer, partly polluted. On the Sinai Peninsula the Nile River is the water source for nine countries, and the Tigris-Euphrates, although still providing water in relative abundance, is prey to the failure of Iraq, Syria, and Turkey to reach water-sharing agreements. Discussion includes the possibilities of turning the win-lose situations into win-win situations by appropriate water management and the problem of lack of a clear legal framework for settling disputes.

Postel, S.

1993-08-01T23:59:59.000Z

336

Water's Hydrogen Bond Strength  

E-Print Network (OSTI)

Water is necessary both for the evolution of life and its continuance. It possesses particular properties that cannot be found in other materials and that are required for life-giving processes. These properties are brought about by the hydrogen bonded environment particularly evident in liquid water. Each liquid water molecule is involved in about four hydrogen bonds with strengths considerably less than covalent bonds but considerably greater than the natural thermal energy. These hydrogen bonds are roughly tetrahedrally arranged such that when strongly formed the local clustering expands, decreasing the density. Such low density structuring naturally occurs at low and supercooled temperatures and gives rise to many physical and chemical properties that evidence the particular uniqueness of liquid water. If aqueous hydrogen bonds were actually somewhat stronger then water would behave similar to a glass, whereas if they were weaker then water would be a gas and only exist as a liquid at sub-zero temperatures. The overall conclusion of this investigation is that water's hydrogen bond strength is poised centrally within a narrow window of its suitability for life.

Martin Chaplin

2007-06-10T23:59:59.000Z

337

Brookhaven's Drinking-Water Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Quality Water Quality The Lab's finished drinking water is produced with pride by the staff of BNL's Water Treatment Facility Home Groundwater Consumer Confidence Reports Water Treatment Process Resources Tap Water Recommendations Water Cooler Cleaning Additional Resources Brookhaven Lab Drinking Water Brookhaven produces its own drinking water for all employees, facility-users, guests, residents, and visitors on site at its Water Treatment Facility (WTF). BNL's drinking water is pumped from groundwater by five active wells and processed at the WTF which can handle up to 6 million gallons per day. The "finished" water is sent to the Lab's two storage towers and then distributed around the site via 45 miles of pipeline. To ensure that Brookhaven's water meets all applicable local, state, and

338

Water Sampling | Open Energy Information  

Open Energy Info (EERE)

Water Sampling Water Sampling Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Water Sampling Details Activities (51) Areas (45) Regions (5) NEPA(2) Exploration Technique Information Exploration Group: Field Techniques Exploration Sub Group: Field Sampling Parent Exploration Technique: Field Sampling Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Water composition and source of fluids Thermal: Water temperature Dictionary.png Water Sampling: Water sampling is done to characterize the chemical, thermal, or hydrological properties of a surface or subsurface aqueous system. Other definitions:Wikipedia Reegle Introduction Water sampling is done to characterize the geothermal system under investigation. A geothermal water typically has a unique chemical signature

339

Wind/Water Nexus  

DOE Green Energy (OSTI)

Nobel laureate Richard Smalley cited energy and water as among humanity's top problems for the next 50 years as the world's population increases from 6.3 billion to 9 billion. The U.S. Department of Energy's Wind and Hydropower Program has initiated an effort to explore wind energy's role as a technical solution to this critically important issue in the United States and the world. This four-page fact sheet outlines five areas in which wind energy can contribute: thermoelectric power plant/water processes, irrigation, municipal water supply, desalination, and wind/hydropower integration.

Not Available

2006-04-01T23:59:59.000Z

340

EXPERIMENTAL ANIMAL WATERING DEVICE  

SciTech Connect

A device for watering experimental animals confined in a battery of individual plastic enclosures is described. It consists of a rectangular plastic enclosure having a plurality of fluid-tight compartments, each with a drinking hole near the bottom and a filling hole on the top. The enclosure is immersed in water until filled, its drinking holes sealed with a strip of tape, and it is then placed in the battery. The tape sealing prevents the flow of water from the device, but permits animals to drink by licking the drinking holes. (AEC)

Finkel, M.P.

1964-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Green Systems Solar Hot Water  

E-Print Network (OSTI)

Green Systems Solar Hot Water Heating the Building Co-generation: Heat Recovery System: Solar Thermal Panels (Trex enclosure) Hot Water Storage Tank (TS-5; basement) Hot Water Heaters (HW-1,2; basement) Pre-heats water so water heaters don't need to use as much energy Gas-powered, high efficiency

Schladow, S. Geoffrey

342

Burbank Water and Power - Solar Water Heater Rebate Program (California) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Burbank Water and Power - Solar Water Heater Rebate Program Burbank Water and Power - Solar Water Heater Rebate Program (California) Burbank Water and Power - Solar Water Heater Rebate Program (California) < Back Eligibility Residential Savings Category Heating & Cooling Solar Water Heating Program Info State California Program Type Utility Rebate Program Rebate Amount $1,500 Provider Rebates Burbank Water and Power is providing incentives for the purchase of solar water heaters. Incentives are only available to residential customers with electric water heaters. There is a limit of one solar water heater per year per property. Applicants must provide access to their residence for a pre-inspection to verify the existing use of an electric water heater. Customers must comply with all code and permit requirements. More

343

Water and Energy Interactions  

E-Print Network (OSTI)

US DOE). Energy Sources: Bioenergy. http://www.energy.gov/comparison of algae to other bioenergy feedstocks. Environ.The water footprint of bioenergy. Proc. Natl. Acad. Sci. USA

McMahon, James E.

2013-01-01T23:59:59.000Z

344

Optimization of Cooling Water  

E-Print Network (OSTI)

A cooling water system can be optimized by operation at the highest possible cycles of concentration without risking sealing and fouling on heat exchanger surfaces. The way to optimize will be shown, with a number of examples of new systems.

Matson, J.

1985-05-01T23:59:59.000Z

345

Water | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Renewables » Water Renewables » Water Water EERE plays a key role in advancing America's "all of the above" energy strategy, leading a large network of researchers and other partners to deliver innovative technologies that will make renewable electricity generation cost-competitive with traditional sources of energy. EERE plays a key role in advancing America's "all of the above" energy strategy, leading a large network of researchers and other partners to deliver innovative technologies that will make renewable electricity generation cost-competitive with traditional sources of energy. Image of a buoy used for creating electricity from waves on the water. An american flag is attached to the top of the yellow buoy. The U.S. Department of Energy (DOE) leads the growing global effort to

346

Report on Produced Water  

NLE Websites -- All DOE Office Websites (Extended Search)

September 2009 Produced Water Volumes and Management Practices Page 3 Table of Contents Executive Summary ........................................................................................................................ 7 Chapter 1 - Introduction ............................................................................................................. 11 1.1 Purpose .......................................................................................................................... 11 1.2 Background ................................................................................................................... 11 1.3 Overview ....................................................................................................................... 11

347

Water and Energy Interactions  

E-Print Network (OSTI)

water from production of crude oil, natural gas, and coaleach gallon (3.79 liters) of crude oil. When combined withto refine each gallon of crude oil, between 3.6 and 7.0

McMahon, James E.

2013-01-01T23:59:59.000Z

348

Solar hot water heater  

SciTech Connect

A solar hot water heater includes an insulated box having one or more hot water storage tanks contained inside and further having a lid which may be opened to permit solar radiation to heat a supply of water contained within the one or more hot water storage tanks. A heat-actuated control unit is mounted on an external portion of the box, such control unit having a single pole double throw thermostat which selectively activates an electric winch gear motor to either open or close the box lid. The control unit operates to open the lid to a predetermined position when exposed to the sun's rays, and further operates to immediately close the lid in response to any sudden drop in temperature, such as might occur during a rainstorm, clouds moving in front of the sun, or the like.

Melvin, H.A.

1982-12-28T23:59:59.000Z

349

Water Treatment Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

to see the operation than have us explain it. Basically, most treatment plants remove the solid material and use living organisms and chlorine to clean up the water. Steve Sample...

350

Water and Energy Interactions  

E-Print Network (OSTI)

past 15 years, nine solar thermal power plants, with a totala) colocating thermal power plants that use seawater forWater used in thermal electric power plants is extracted

McMahon, James E.

2013-01-01T23:59:59.000Z

351

UV water disinfector  

DOE Patents (OSTI)

A UV disinfector with a gravity driven feed water delivery system and an air-suspended bare UV lamp are disclosed. The disinfector is hydrodynamically optimized with a laminerizing, perforated baffle wall, beveled treatment chamber, and outlet weir. 7 figs.

Gadgil, A.; Garud, V.

1998-07-14T23:59:59.000Z

352

UV water disinfector  

DOE Patents (OSTI)

A UV disinfector with a gravity driven feed water delivery system, and an air-suspended bare UV lamp. The disinfector is hydrodynamically optimized with a laminerizing, perforated baffle wall, beveled treatment chamber, and outlet weir.

Gadgil, Ashok (El Cerrito, CA); Garud, Vikas (Bombay, IN)

1998-07-14T23:59:59.000Z

353

Water and Energy Interactions  

E-Print Network (OSTI)

opportunities at U.S. nuclear power plants. U.S. Dep. EnergyAlthough coal and nuclear power plants tend to supply baseis difficult to develop nuclear power plants in water-scarce

McMahon, James E.

2013-01-01T23:59:59.000Z

354

Water and Energy Interactions  

E-Print Network (OSTI)

US Dep. Energy, Washington, DC. http://www1.eere.energy.gov/Alliance Save Energy, Washington, DC. http://watergy.org/of Energy and Water. US DOE, Washington, DC. http://

McMahon, James E.

2013-01-01T23:59:59.000Z

355

Storm Water Detention Pond  

NLE Websites -- All DOE Office Websites (Extended Search)

allow water to meander through them. * Amend soil on the banks of the drainages with a compost-based soil builder. * Plant or stake the channel with with appropriate vegetation...

356

Contaminating Fresh Waters (Florida)  

Energy.gov (U.S. Department of Energy (DOE))

It is illegal to discharge any dyestuff, coal tar, oil, sawdust, poison, or deleterious substances into any fresh running waters in Florida in quantities sufficient to injure, stupefy, or kill fish...

357

Makeshift cold water aquarium  

NLE Websites -- All DOE Office Websites (Extended Search)

Location: NA Country: NA Date: NA Question: Hi- I am a student teacher in the Seattle area. As a hobby, I scuba dive in the icy waters of Puget Sound. I would love to set...

358

Water and Energy Interactions  

E-Print Network (OSTI)

oil, natural gas, and coal bed methane. Argonne Natl. Lab. ,gallons of water (31). Coal-bed methane, the availability ofnatural gas production. Coal-bed methane produces large, but

McMahon, James E.

2013-01-01T23:59:59.000Z

359

September 2004 Water Sampling  

Office of Legacy Management (LM)

was not identified at many groundwater locations. 18. Was the presence or absence of ice in the cooler documented at every sample location? Yes 19. Were water levels measured...

360

air_water.cdr  

Office of Legacy Management (LM)

Office of Legacy Management Weldon Spring Site Air and Water Monitoring 32008 This fact sheet provides information at Weldon Spring, Missouri. This site is managed by the U.S....

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Arkansas Water Resources Center  

E-Print Network (OSTI)

Alluvial Aquifer, that has resulted from oil and gas operations in the area, particularly in south, discharge from poultry and hog plants, and leaky landfills, among others. Saline water intrusion and near

Soerens, Thomas

362

Water Heater Safety FAQs  

NLE Websites -- All DOE Office Websites (Extended Search)

from 30 gallons to 80 gallons in a variety of fuel sources (gas, electric, liquid propane). We also offer a wide selection of Rheem gas and electric tankless water heaters....

363

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Transport Membrane Condenser for Water and Energy Recovery from Power Plant Flue Gas Gas Technology Institute (GTI) will develop a membrane separation technology to recover water...

364

IEP - Water-Energy Interface: Innovative Water Reuse and Recovery  

NLE Websites -- All DOE Office Websites (Extended Search)

is being performed in this program area to develop advanced technologies to reuse power plant cooling water and associated waste heat and to investigate methods to recover water...

365

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Use of Produced Water in Recirculated Cooling Systems at Power Generating Facilities - EPRI The objective of this project is evaluation and development of the use of produced water...

366

Santa Clara Water & Sewer- Solar Water Heating Program  

Energy.gov (U.S. Department of Energy (DOE))

In 1975, the City of Santa Clara established the nation's first municipal solar utility. Under the Solar Water Heating Program, the Santa Clara Water & Sewer Utilities Department supplies,...

367

IEP - Water-Energy Interface: Cooling Water Intake Structures  

NLE Websites -- All DOE Office Websites (Extended Search)

The types of cooling water systems to be evaluated are: Wet Cooling Tower - The condenser is cooled with water recirculated to a mechanical draft cooling tower. Because there...

368

The Relationship between Water and Energy: Optimizing Water and Energy  

E-Print Network (OSTI)

In an effort to conserve water, drought-proof operating plants and control costs, the critical relationship of water and energy is clearly exposed. Five years of effort has transpired into countless studies, more than 100 projects and a clear understanding that the highest value opportunities for water conservation usually exist where there is the strongest interaction of water and energy. Steam management systems, process cooling, high quality water production and waste water treatment represent high probability areas for water conservation and value capture. These are not the only areas to reduce water management infrastructure and environmental footprint but they represent areas with the high potential for efforts to return bottom line value.

Finley, T.; Fennessey, K.; Light, R.

2007-01-01T23:59:59.000Z

369

A Realistic Hot Water Draw Specification for Rating Solar Water...  

NLE Websites -- All DOE Office Websites (Extended Search)

thornton@tess-inc.com ABSTRACT In the United States, annual performance ratings for solar water heaters are simulated, using TMY weather and specified water draw. Bias...

370

September 2004 Water Sampling  

Office of Legacy Management (LM)

3 3 Groundwater and Surface Water Sampling at the Slick Rock East and West, Colorado, Processing Sites November 2013 LMS/SRE/SRW/S0913 This page intentionally left blank U.S. Department of Energy DVP-September 2013, Slick Rock, Colorado November 2013 RIN 13095593 Page i Contents Sampling Event Summary ...............................................................................................................1 Slick Rock East and West, Colorado, Processing Sites, Sample Location Map .............................5 Data Assessment Summary ..............................................................................................................7 Water Sampling Field Activities Verification Checklist .............................................................9

371

September 2004 Water Sampling  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Groundwater and Surface Water Sampling at the Tuba City, Arizona, Disposal Site November 2013 LMS/TUB/S00813 This page intentionally left blank U.S. Department of Energy DVP-August 2013, Tuba City, Arizona November 2013 RIN 13085553 Page i Contents Sampling Event Summary ...............................................................................................................1 Tuba City, Arizona, Disposal Site, Sample Location Map ..............................................................7 Data Assessment Summary ..............................................................................................................9 Water Sampling Field Activities Verification Checklist ...........................................................11

372

Water softening process  

DOE Patents (OSTI)

This invention involves an improved process for softening hard water which comprises selectively precipitaing CaCO.sub.3 to form a thin layer thereof, increasing the pH of said water to precipitate magnesium as magnesium hydroxide and then filtering the resultant slurry through said layer. The CaCO.sub.3 layer serves as a thin permeable layer which has particularly useful application in cross-flow filtration applications.

Sheppard, John D. (Oak Ridge, TN); Thomas, David G. (Oak Ridge, TN)

1976-01-01T23:59:59.000Z

373

Purifying contaminated water  

DOE Patents (OSTI)

Process for removing biorefractory compounds from contaminated water (e.g., oil shale retort waste-water) by contacting same with fragmented raw oil shale. Biorefractory removal is enhanced by preactivating the oil shale with at least one member of the group of carboxylic, acids, alcohols, aldehydes, ketones, ethers, amines, amides, sulfoxides, mixed ether-esters and nitriles. Further purification is obtained by stripping, followed by biodegradation and removal of the cells.

Daughton, Christian G. (San Pablo, CA)

1983-01-01T23:59:59.000Z

374

Water Cooling | Open Energy Information  

Open Energy Info (EERE)

Cooling: Cooling: Water cooling is commonly defined as a method of using water as a heat conduction to remove heat from an object, machine, or other substance by passing cold water over or through it. In energy generation, water cooling is typically used to cool steam back into water so it can be used again in the generation process. Other definitions:Wikipedia Reegle Water Cooling Typical water cooled condenser used for condensing steam Water or liquid cooling is the most efficient cooling method and requires the smallest footprint when cold water is readily available. When used in power generation the steam/vapor that exits the turbine is condensed back into water and reused by means of a heat exchanger. Water cooling requires a water resource that is cold enough to bring steam, typically

375

Water Heating | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

need to know about saving money on water heating costs Read more Selecting a New Water Heater Tankless? Storage? Solar? Save money on your water heating bill by choosing the right...

376

FEMP-Solar Water Heating  

Energy.gov (U.S. Department of Energy (DOE))

Fact sheet details solar water heating and how to use the sun to heat domestic water in any climate. Document explains how solar water heating helps to save energy, reduce utility costs, and preserve the environment.

377

Clean Water Legacy Act (Minnesota)  

Energy.gov (U.S. Department of Energy (DOE))

This Act provides authority, direction, and resources to achieve and maintain water quality standards for groundwater and surface waters by implementing the federal Clean Water Act as well as...

378

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Thermoelectric Power Plant Water Demands Using Alternative Water Supplies: Thermoelectric Power Plant Water Demands Using Alternative Water Supplies: Power Demand Options in Regions of Water Stress and Future Carbon Management Sandia National Laboratories (SNL) is conducting a regional modeling assessment of non-traditional water sources for use in thermoelectric power plants. The assessment includes the development of a model to characterize water quantity and quality from several sources of non-traditional water, initially focused within the Southeastern United States. The project includes four primary tasks: (1) identify water sources, needs, and treatment options; (2) assess and model non-traditional water quantity and quality; (3) identify and characterize water treatment options including an assessment of cost; and (4) develop a framework of metrics, processes, and modeling aspects that can be applied to other regions of the United States.

379

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Internet-Based, GIS Catalog of Non-Traditional Sources of Cooling Water for Use at Coal-Fired Power Plants Internet-Based, GIS Catalog of Non-Traditional Sources of Cooling Water for Use at Coal-Fired Power Plants GIS Catalog Graphic Arthur Langhus Layne, LLC will create an internet-based, geographic information system (GIS) catalog of non-traditional sources of cooling water for coal-fired power plants. The project will develop data to identify the availability of oil and gas produced water, abandoned coal mine water, industrial waste water, and low-quality ground water. By pairing non-traditional water sources to power plant water needs, the research will allow power plants that are affected by water shortages to continue to operate at full-capacity without adversely affecting local communities or the environment. The nationwide catalog will identify the location, water withdrawal, and

380

Mitigation, Adaptation, Uncertainty -- Growing Water  

E-Print Network (OSTI)

UrbanLab is Sarah Dunn + Martin Felsen, with Lee Greenberg,Growing Water Martin Felsen and Sarah Dunn The Growing Water

Felsen, Martin; Dunn, Sarah

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Reading Comprehension - The Water Cycle  

NLE Websites -- All DOE Office Websites (Extended Search)

three phases that water can be found in are atom, molecule, compound solids, liquids, and gas . During condensation precipitation evaporation , water turns...

382

How Water Molecules are Connected  

NLE Websites -- All DOE Office Websites (Extended Search)

Science (Dec. 17, 2004) * *Online subscription needed. How Water Molecules are Connected Water may be the most important molecule on Earth, but our understanding of its properties...

383

Conservation of Water Resources (Virginia)  

Energy.gov (U.S. Department of Energy (DOE))

The State Water Control Board is responsible for formulating and implementing a comprehensive water use policy for the Commonwealth of Virginia. Implemented by the Department of Environmental...

384

Disinfecting Water after a Disaster  

E-Print Network (OSTI)

This publication explains how to disinfect water after a flood, as well as where to find water in an emergency when supplies are limited.

Dozier, Monty; Schoessow, Courtney

2005-09-30T23:59:59.000Z

385

NREL: Water Power Research - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Search More Search Options Site Map Printable Version Projects NREL's water power R&D projects support industry efforts to develop and deploy cost-effective water power...

386

Columbia Water & Light- Solar Rebates  

Energy.gov (U.S. Department of Energy (DOE))

Columbia Water & Light (CWL) offers rebates to its commercial and residential customers for the purchase of solar water heaters and solar photovoltaic systems. These rebates are available for...

387

Water Heaters | Open Energy Information  

Open Energy Info (EERE)

Heaters Jump to: navigation, search TODO: Add description List of Water Heaters Incentives Retrieved from "http:en.openei.orgwindex.php?titleWaterHeaters&oldid267202...

388

Soil and Water Conservation (Indiana)  

Energy.gov (U.S. Department of Energy (DOE))

The Indiana Association of Soil and Water Conservation Districts is an association of the 92 soil and water conservation districts, each representing one of the 92 Indiana counties.

389

System for treating produced water  

DOE Patents (OSTI)

A system and method were used to treat produced water. Field-testing demonstrated the removal of contaminants from produced water from oil and gas wells.

Sullivan, Enid J. (Los Alamos, NM); Katz, Lynn (Austin, TX); Kinney, Kerry (Austin, TX); Bowman, Robert S. (Lemitar, NM); Kwon, Soondong (Kyungbuk, KR)

2010-08-03T23:59:59.000Z

390

Fluid Metrology Calibration Services - Water Flow  

Science Conference Proceedings (OSTI)

Fluid Metrology Calibration Services - Water Flow. Water Flow Calibrations 18020C. ... NIST provides calibration services for water flow meters. ...

2011-10-03T23:59:59.000Z

391

Empirical Modeling of Layered Integrated Water Vapor Using Surface Mixing Ratio in Nigeria  

Science Conference Proceedings (OSTI)

Using the available upper-air data for three stations in Nigeria (Lagos, a coastal station; Minna, an inland station; and Kano, a sub-Sahelian station), an intensive examination has been carried out on the linkage between surface mixing ratio rs ...

B. Adeyemi

2009-02-01T23:59:59.000Z

392

Pressurized Water Reactor Secondary Water Chemistry Guidelines - Revision 7  

Science Conference Proceedings (OSTI)

State-of-the-art water chemistry programs reduce equipment corrosion and enhance steam generator reliability. A committee of industry experts prepared these revised PWR Secondary Water Chemistry Guidelines to incorporate the latest field and laboratory data on secondary system corrosion and performance issues. Pressurized water reactor (PWR) operators can use these guidelines to update their secondary water chemistry programs.

2009-02-17T23:59:59.000Z

393

Regulations Establishing Water Quality Standards for Surface...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Establishing Water Quality Standards for Surface Water of the State of Arkansas (Arkansas) Regulations Establishing Water Quality Standards for Surface Water of the State of...

394

Colorado Ground Water Commission | Open Energy Information  

Open Energy Info (EERE)

Water Commission Jump to: navigation, search Name Colorado Ground Water Commission Place Colorado Website http:water.state.co.usgroun References Colorado Ground Water Commission...

395

Regulations Establishing Water Quality Standards for Surface Water of the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Establishing Water Quality Standards for Surface Water Establishing Water Quality Standards for Surface Water of the State of Arkansas (Arkansas) Regulations Establishing Water Quality Standards for Surface Water of the State of Arkansas (Arkansas) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Arkansas Program Type Environmental Regulations Siting and Permitting

396

Water Usage Law, Major Water Users (Missouri) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Usage Law, Major Water Users (Missouri) Water Usage Law, Major Water Users (Missouri) Water Usage Law, Major Water Users (Missouri) < Back Eligibility Agricultural Commercial Construction Fed. Government Industrial Institutional Investor-Owned Utility Local Government Municipal/Public Utility Retail Supplier Rural Electric Cooperative Systems Integrator Tribal Government Utility Savings Category Water Buying & Making Electricity Program Info State Missouri Program Type Environmental Regulations Provider Missouri Department of Natural Resources Any water user with the capability to withdraw or divert 100,000 gallons or more per day from any stream, river, lake, well, spring or other water source must register and file for a permit for water withdrawal and diversion from the Department of Natural Resources. Additionally, no major

397

Water Transport Exploratory Studies  

NLE Websites -- All DOE Office Websites (Extended Search)

Exploratory Studies Exploratory Studies Office of Hydrogen, Fuel Cells, and Infrastructure Technologies 2007 kickoff meeting February 13-14, 2007 DOE Forrestal Building Rod Borup Mukundan Rangachary, Bryan Pivovar, Yu Seung Kim, John Davey, David Wood, Tom Springer, Muhammad Arif , Ken Chen, Simon Cleghorn, Will Johnson, Karren More, Peter Wilde, Tom Zawodzinski Los Alamos National Lab This presentation does not contain any proprietary or confidential information Objectives * Develop understanding of water transport in PEM Fuel Cells (non-design-specific) * Evaluate structural and surface properties of materials affecting water transport and performance * Develop (enable) new components and operating methods * Accurately model water transport within the fuel cell * Develop a better understanding of the effects of

398

Alternate Water Supply System  

Office of Legacy Management (LM)

Alternate Water Supply Alternate Water Supply System Flushing Report Riverton, Wyoming, Processing Site January 2008 Office of Legacy Management DOE M/1570 2008 - -L Work Performed Under DOE Contract No. for the U.S. Department of Energy Office of Legacy Management. DE-AC01-02GJ79491 Approved for public release; distribution is unlimited. Office of Legacy Management Office of Legacy Management Office of Legacy Management U.S. Department of Energy This page intentionally left blank DOE-LM/1570-2008 Alternate Water Supply System Flushing Report Riverton, Wyoming, Processing Site January 2008 Work Performed by S.M. Stoller Corporation under DOE Contract No. DE-AC01-02GJ79491 for the U.S. Department of Energy Office of Legacy Management, Grand Junction, Colorado This page intentionally left blank

399

Energy and Water Act  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Acquisition Letter 2004-02 - FY 2004 Le2islation Provisions (dated March 1.2004) Acquisition Letter 2004-02 - FY 2004 Le2islation Provisions (dated March 1.2004) Energy and Water Act AL-2004-02 provides guidance regarding the implementation of Section 30 I. 304. 307. 501,502, and Legislative Direction as provided in the Energy and Water Development Appropriation:) Act Pub. L, 108-137, also known as the E&W Act. RFP's for unfunded programs, UseJ' facilities, lobbying restrictions, and purchase of American made products are carried ovc:r from the FY 2003 Energy and Water Development Appropriations Act Pub, L, 108-7 {Division D), However, while the provision regarding competition still exists in the F'" 2004 legislation, the direction provided by Congress regarding the extend/compete process for 5 Management and Operating (M&O)contracts is

400

Biological denitrification of water  

SciTech Connect

The authors discuss research regarding the denitrification of drinking water. Most work has been done in Europe. As a consequence there may be a gap in the understanding of the international state of the art with regard to drinking-water denitrification. Numerous substrates have been evaluated including methanol, ethanol, acetic acid, methane, carbon monoxide, hydrogen, and various sulfur compounds. Various unit processes have been utilized including biofilters, fluidized-bed and packed-bed reactors, packed towers containing cells immobilized in polymer gels, and completely mixed reactors with cells attached to bouyant porous carriers. There are several commercial facilities currently providing drinking water to European communities. Most include post-treatment with flocculation, filtration, and disinfection. A common concern in denitrification operations is the minimization of nitrite accumulation.

Gayle, B.P. (Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (USA)); Boardman, G.D.; Sherrard, J.H. (Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (USA). Dept. of Civil Engineering); Benoit, R.E. (Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (USA). Dept. of Biology)

1989-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Water, law, science  

SciTech Connect

In a world with water resources severely impacted bytechnology, science must actively contribute to water law. To this end,this paper is an earth scientist s attempt to comprehend essentialelements of water law, and to examine their connections to science.Science and law share a common logical framework of starting with apriori prescribed tenets, and drawing consistent inferences. In science,observationally established physical laws constitute the tenets, while inlaw, they stem from social values. The foundations of modern water law inEurope and the New World were formulated nearly two thousand years ago byRoman jurists who were inspired by Greek philosophy of reason.Recognizing that vital natural elements such as water, air, and the seawere governed by immutable natural laws, they reasoned that theseelements belonged to all humans, and therefore cannot be owned as privateproperty. Legally, such public property was to be governed by jusgentium, the law of all people or the law of all nations. In contrast,jus civile or civil law governed private property. Remarkably, jusgentium continues to be relevant in our contemporary society in whichscience plays a pivotal role in exploiting vital resources common to all.This paper examines the historical roots of modern water law, followstheir evolution through the centuries, and examines how the spirit ofscience inherent in jus gentium is profoundly influencing evolving waterand environmental laws in Europe, the United States and elsewhere. In atechnological world, scientific knowledge has to lie at the core of waterlaw. Yet, science cannot formulate law. It is hoped that a philosophicalunderstanding of the relationships between science and law willcontribute to their constructively coming together in the service ofsociety.

Narasimhan, T.N.

2007-10-17T23:59:59.000Z

402

Impacts of Water Quality on Residential Water Heating Equipment  

SciTech Connect

Water heating is a ubiquitous energy use in all residential housing, accounting for 17.7% of residential energy use (EIA 2012). Today, there are many efficient water heating options available for every fuel type, from electric and gas to more unconventional fuel types like propane, solar, and fuel oil. Which water heating option is the best choice for a given household will depend on a number of factors, including average daily hot water use (total gallons per day), hot water draw patterns (close together or spread out), the hot water distribution system (compact or distributed), installation constraints (such as space, electrical service, or venting accommodations) and fuel-type availability and cost. While in general more efficient water heaters are more expensive than conventional water heating technologies, the savings in energy use and, thus, utility bills can recoup the additional upfront investment and make an efficient water heater a good investment over time in most situations, although the specific payback period for a given installation will vary widely. However, the expected lifetime of a water heater in a given installation can dramatically influence the cost effectiveness and savings potential of a water heater and should be considered, along with water use characteristics, fuel availability and cost, and specific home characteristics when selecting the optimum water heating equipment for a particular installation. This report provides recommendations for selecting and maintaining water heating equipment based on local water quality characteristics.

Widder, Sarah H.; Baechler, Michael C.

2013-11-01T23:59:59.000Z

403

Water drives peptide conformational transitions  

E-Print Network (OSTI)

Transitions between metastable conformations of a dipeptide are investigated using classical molecular dynamics simulation with explicit water molecules. The distribution of the surrounding water at different moments before the transitions and the dynamical correlations of water with the peptide's configurational motions indicate that water is the main driving force of the conformational changes.

Nerukh, Dmitry

2011-01-01T23:59:59.000Z

404

Brief No. 9 WATER SECURITY,  

E-Print Network (OSTI)

Brief No. 9 WATER SECURITY, RISK & SOCIETY 1 of 4 Water Security and Federal Rivers March 2012 Australian National University Key messages · Water security in a hydroclimatic risk society. Climate risks interact with rapidly changing social, demographic and economic forces to position water security

New, Mark

405

National Smart Water Grid  

DOE Green Energy (OSTI)

The United States repeatedly experiences floods along the Midwest's large rivers and droughts in the arid Western States that cause traumatic environmental conditions with huge economic impact. With an integrated approach and solution these problems can be alleviated. Tapping into the Mississippi River and its tributaries, the world's third largest fresh water river system, during flood events will mitigate the damage of flooding and provide a new source of fresh water to the Western States. The trend of increased flooding on the Midwest's large rivers is supported by a growing body of scientific literature. The Colorado River Basin and the western states are experiencing a protracted multi-year drought. Fresh water can be pumped via pipelines from areas of overabundance/flood to areas of drought or high demand. Calculations document 10 to 60 million acre-feet (maf) of fresh water per flood event can be captured from the Midwest's Rivers and pumped via pipelines to the Colorado River and introduced upstream of Lake Powell, Utah, to destinations near Denver, Colorado, and used in areas along the pipelines. Water users of the Colorado River include the cities in southern Nevada, southern California, northern Arizona, Colorado, Utah, Indian Tribes, and Mexico. The proposed start and end points, and routes of the pipelines are documented, including information on right-of-ways necessary for state and federal permits. A National Smart Water Grid{trademark} (NSWG) Project will create thousands of new jobs for construction, operation, and maintenance and save billions in drought and flood damage reparations tax dollars. The socio-economic benefits of NWSG include decreased flooding in the Midwest; increased agriculture, and recreation and tourism; improved national security, transportation, and fishery and wildlife habitats; mitigated regional climate change and global warming such as increased carbon capture; decreased salinity in Colorado River water crossing the US-Mexico border; and decreased eutrophication (excessive plant growth and decay) in the Gulf of Mexico to name a few. The National Smart Water Grid{trademark} will pay for itself in a single major flood event.

Beaulieu, R A

2009-07-13T23:59:59.000Z

406

Impact of Climate Change on Irrigation Water Availability, Crop Water Requirements and Soil Salinity in the SJV, CA  

E-Print Network (OSTI)

on Irrigation Water Availability, Crop Water Requirementsreduced surface water availability can be managed byrequirement and water availability (surface water and

Hopmans, Jan W; Maurer, Edwin P

2008-01-01T23:59:59.000Z

407

Optimization of Chilled Water Systems  

E-Print Network (OSTI)

Chilled water systems are one of the major energy consumers in industrial, commercial, and institutional complexes. The centralization of chilled water systems has considerable advantages, namely: simplified controls, the installed capacity is reduced due to diversity, consolidated maintenance and operation, etc. With chilled water systems, the following areas present potential energy and cost savings: Chilled Water Reset Condenser Water Reset Sequencing of the Chillers Chilled Water Storage Variable Chilled Water Pumping In this paper the feasibility aspect of each of the above items will be discussed.

Gidwani, B. N.

1984-01-01T23:59:59.000Z

408

NREL: Learning - Solar Hot Water  

NLE Websites -- All DOE Office Websites (Extended Search)

Hot Water Hot Water Photo of solar collectors on a roof for a solar hot water system. For solar hot water systems, flat-plate solar collectors are typically installed facing south on a rooftop. The shallow water of a lake is usually warmer than the deep water. That's because the sunlight can heat the lake bottom in the shallow areas, which in turn, heats the water. It's nature's way of solar water heating. The sun can be used in basically the same way to heat water used in buildings and swimming pools. Most solar water heating systems for buildings have two main parts: a solar collector and a storage tank. The most common collector is called a flat-plate collector. Mounted on the roof, it consists of a thin, flat, rectangular box with a transparent cover that faces the sun. Small tubes

409

Absorption Heat Pump Water Heater  

NLE Websites -- All DOE Office Websites (Extended Search)

Absorption Heat Pump Water Heater Absorption Heat Pump Water Heater Kyle Gluesenkamp Building Equipment Group, ETSD gluesenkampk@ornl.gov 865-241-2952 April 3, 2013 CRADA - GE Development of High Performance Residential Gas Water Heater Image courtesy John Wilkes 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: Absorption technology could greatly boost water heater efficiency, but faces barriers of high first cost and working fluid challenges. Impact of Project: Energy factor of gas storage water

410

Absorption Heat Pump Water Heater  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Absorption Heat Pump Water Heater Absorption Heat Pump Water Heater Kyle Gluesenkamp Building Equipment Group, ETSD gluesenkampk@ornl.gov 865-241-2952 April 3, 2013 CRADA - GE Development of High Performance Residential Gas Water Heater Image courtesy John Wilkes 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: Absorption technology could greatly boost water heater efficiency, but faces barriers of high first cost and working fluid challenges. Impact of Project: Energy factor of gas storage water

411

Energy-efficient water heating  

SciTech Connect

This fact sheet describes how to reduce the amount of hot water used in faucets and showers, automatic dishwashers, and washing machines; how to increase water-heating system efficiency by lowering the water heater thermostat, installing a timer and heat traps, and insulating hot water pipes and the storage tank; and how to use off-peak power to heat water. A resource list for further information is included.

NONE

1995-01-01T23:59:59.000Z

412

Guidelines for Makeup Water Treatment  

Science Conference Proceedings (OSTI)

The quality of boiler and heat recovery steam generator HRSG cycle makeup water is central to ensuring the necessary purity of boiler or HRSG water, feedwater, and steam. It plays an important role in ensuring component availability and reliability in fossil and combined cycle plants. This report presents up-to-date guidelines based on proven approaches for producing makeup water from various raw water supplies. Major losses of availability in fossil fuel plants are attributable to water and steam contam...

2010-12-23T23:59:59.000Z

413

BOILING WATER REACTOR WITH FEED WATER INJECTION NOZZLES  

DOE Patents (OSTI)

This patent covers the use of injection nozzles for pumping water into the lower ends of reactor fuel tubes in which water is converted directly to steam. Pumping water through fuel tubes of this type of boiling water reactor increases its power. The injection nozzles decrease the size of pump needed, because the pump handles only the water going through the nozzles, additional water being sucked into the tubes by the nozzles independently of the pump from the exterior body of water in which the fuel tubes are immersed. The resulting movement of exterior water along the tubes holds down steam formation, and thus maintains the moderator effectiveness, of the exterior body of water. (AEC)

Treshow, M.

1963-04-30T23:59:59.000Z

414

Warm Water Mass Formation  

Science Conference Proceedings (OSTI)

Poleward heat transport by the own implies warm Water mass formation, i.e., the retention by the tropical and subtropical ocean of some of its net radiant heat gain. Under what condition net heat retention becomes comparable to latent heat ...

G. T. Csanady

1984-02-01T23:59:59.000Z

415

September 2004 Water Sampling  

Office of Legacy Management (LM)

Riverton, Wyoming, Riverton, Wyoming, Processing Site September 2013 LMS/RVT/S00613 This page intentionally left blank U.S. Department of Energy DVP-June 2013, Riverton, Wyoming September 2013 RIN 13065379 Page i Contents Sampling Event Summary ...............................................................................................................1 Riverton, Wyoming, Processing Site, Sample Location Map .........................................................5 Data Assessment Summary ..............................................................................................................7 Water Sampling Field Activities Verification Checklist .............................................................9 Laboratory Performance Assessment ........................................................................................11

416

Water Resources Milind Sohoni  

E-Print Network (OSTI)

111111111111111111111111111111111111111111111111111111 111111111111111111111111111111111111 111111111111111111 Massive Rock Well Fractured Basalt WT Soil of fractured basalt. Fractures and layer-junctions important for seepage. Note seepage face. Soil layers lined, and is typically pebbles. The water collects in the main column and is fed up through the delivery pipe

Sohoni, Milind

417

Hot water supply system  

SciTech Connect

A hot water supply system is described which consists of: a boiler having an exhaust; solar panels; and a frame supporting the solar panels and including a compartment beneath the solar panels, the boiler exhaust termining in the compartment beneath the solar panels, the boiler being within the compartment.

Piper, J.R.

1986-06-10T23:59:59.000Z

418

SUPERCRITICAL WATER PARTIAL OXIDATION  

E-Print Network (OSTI)

of ~$3/GJ can be achieved with small-size SWPO gasifiers. · Demonstrate a 5-tpd reduced-scale gasifier at a small municipal POTW. · Construct a 40-tpd commercial biomass gasifier at a large municipal POTW. M-246 into hydrogen ­ SCW quickly gasifies all organics with minimum char ­ Water-gas shift contributes significantly

419

Cooling Water System Optimization  

E-Print Network (OSTI)

During summer months, many manufacturing plants have to cut back in rates because the cooling water system is not providing sufficient cooling to support higher production rates. There are many low/no-cost techniques available to improve tower performance. To understand the importance of the optimization techniques, cooling tower theory will be discussed first.

Aegerter, R.

2005-01-01T23:59:59.000Z

420

Water Cooling Systems  

Science Conference Proceedings (OSTI)

...coil. Usually, two pumps are provided, one as a standby with an automatic switchover, because it is extremely important to circulate water through the coil continuously to prevent it from being damaged. To protect induction furnace equipment during momentary power interruptions or prolonged power...

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Plasmonic solar water splitting.  

Science Conference Proceedings (OSTI)

The study of the optoelectronic effects of plasmonic metal nanoparticles on semiconductors has led to compelling evidence for plasmon-enhanced water splitting. We review the relevant physics, device geometries, and research progress in this area. We focus on localized surface plasmons and their effects on semiconductors, particularly in terms of energy transfer, scattering, and hot electron transfer.

Warren, S. C.; Thimsen, E. (Materials Science Division); (Ecole Polytechnique Federale de Lausanne); (Northwestern Univ.)

2012-01-01T23:59:59.000Z

422

Water Conservation and Water Use Efficiency (Wisconsin) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conservation and Water Use Efficiency (Wisconsin) Conservation and Water Use Efficiency (Wisconsin) Water Conservation and Water Use Efficiency (Wisconsin) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Buying & Making Electricity Water Program Info Start Date 01/2011 State Wisconsin Program Type Siting and Permitting Provider Wisconsin Department of Natural Resources Wisconsin has several statutes that promote water conservation and

423

Water Conservation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Conservation Water Conservation Water Conservation Mission The team facilitates the reduction of water consumption intensity at LM sites in support of requirements of Executive Order (EO) 13423, Strengthening Federal Environmental, Energy, and Transportation Management, and (EO) 13514, Federal Leadership in Environmental, Energy, and Economic Performance, and DOE Order 436.1, Departmental Sustainability, as approved by LM. The Water Conservation Team advocates natural resource sustainability by continually improving water use efficiencies. Scope LM and the contractor evaluate, make recommendations, and implement approved programs to maintain and operate its buildings and facilities in a manner that beneficially reduces water use, loss, and waste at LM sites. The team strives to reduce water use intensity annually. Water efficiency

424

Cornell University Hot Water Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Hot Water System Hot Water System The production and delivery of hot water in the CUSD home is technologically advanced, economical, and simple. Hot water is produced primarily by the evacuated solar thermal tube collectors on the roof of the house. The solar thermal tube array was sized to take care of the majority of our heating and hot water needs throughout the course of the year in the Washington, DC climate. The solar thermal tube array also provides heating to the radiant floor. The hot water and radiant floor systems are tied independently to the solar thermal tube array, preventing the radiant floor from robbing the water heater of much needed thermal energy. In case the solar thermal tubes are not able to provide hot water to our system, the hot water tank contains an electric heating

425

Reading Comprehension - The Water Cycle  

NLE Websites -- All DOE Office Websites (Extended Search)

The Water Cycle The Water Cycle Evaporation, Condensation and Precipitation The _________ moon sun water clouds evaporates _________ fish oceans rain water from lakes and oceans. As the air rises, it cools. The water vapor condenses into tiny droplets of _________ evaporation clouds water sunshine . The droplets crowd together and form a _________ cloud lake storm precipitation . Wind blows the _________ rain sun droplet cloud towards the land. The tiny droplets join together and fall as precipitation to the _________ river lake ground cloud . The water soaks into the ground and collects in _________ rivers and lakes oceans and clouds jars and cups plants and animals . The _________ storm cycle river house that never ends has started again! A water cycle diagram. Use the diagram to identify the different parts of the water cycle:

426

Hot tips on water heating  

SciTech Connect

Water-heater manufacturers responded to the call for energy conservation with innovations and efficiency standards for the home, business, and plant. Conventional tank-type water heaters offer better design and insulation, but the heat-pump water heater offers the highest efficiency. Available in add-on units and integral units, they now represent up to 40% of manufacturers' sales. Other advances are the desuperheater devices which recapture air-conditioner waste heat, solar-water-heating systems, instantaneous water heaters, and industrial heat-recovery systems for process water. 1 figure. (DCK)

Forker, J.

1982-03-01T23:59:59.000Z

427

Water Rights: Surface Water (Indiana) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Surface Water (Indiana) Surface Water (Indiana) Water Rights: Surface Water (Indiana) < Back Eligibility Agricultural Construction Fed. Government Industrial Institutional Investor-Owned Utility Local Government Municipal/Public Utility Nonprofit Rural Electric Cooperative State/Provincial Govt Tribal Government Utility Savings Category Water Buying & Making Electricity Program Info State Indiana Program Type Environmental Regulations Provider Indiana Department of Natural Resources The Indiana Department of Natural Resources regulates the use and diversion of surface waters. An entity that creates additional stream volumes by releases from impoundments built and financed by the entity for the entity's purpose may use the increased flowage at all times. Any entity may be required to report the volume of water used. Diversion of water out of

428

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Extraction From Coal-Fired Power Plant Flue Gas-Energy & Environmental Research Center (EERC) Coal occurs naturally with water present (3-60 weight %), and the combustion...

429

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

would otherwise be evaporated from the stack. This water would then be available for power plant operations such as cooling tower or flue gas desulfurization make-up water. An...

430

River Forecast Application for Water Management: Oil and Water?  

Science Conference Proceedings (OSTI)

Managing water resources generally and managing reservoir operations specifically have been touted as opportunities for applying forecasts to improve decision making. Previous studies have shown that the application of forecasts into water ...

Kevin Werner; Kristen Averyt; Gigi Owen

2013-07-01T23:59:59.000Z

431

Burbank Water and Power - Solar Water Heater Rebate Program ...  

Open Energy Info (EERE)

Burbank Water and Power - Solar Water Heater Rebate Program (California) No revision has been approved for this page. It is currently under review by our subject matter experts. No...

432

Helping California Reach Its Water and Water/Energy Conservation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Helping California Reach Its Water and WaterEnergy Conservation Potential Speaker(s): Mary Ann Dickinson Date: September 25, 2003 - 12:00pm Location: Bldg. 90 Seminar HostPoint...

433

NORTH AMERICAN WATER OFFICE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NORTH AMERICAN WATER OFFICE NORTH AMERICAN WATER OFFICE P.O. Box 174 Lake Elmo, MN 55042 Phone: (612) 770-3861 Fax: (612) 770-3976 January 30, 1998 US Department of Energy Office of General Council GC-52 1000 Independence Ave. SW Washington DC 20585 RE: Preparation of Report to Congress on Price-Anderson Act Dear Office of General Council: The Price Anderson Act should be eliminated. The Price Anderson Act assumes that the encouragement and growth of the commercial nuclear industry is in the public interest. It is not. Rational evaluation of the commercial nuclear industry forces the conclusion that the Price Anderson Act simply shields the commercial nuclear industry from costs that it would otherwise, in a fair market setting, be forced to internalize and pay. Price Anderson amounts to

434

Water_Treatment.cdr  

Office of Legacy Management (LM)

Since dewatering at the Weldon Spring site began in Since dewatering at the Weldon Spring site began in 1992, more than 290 million gallons of contaminated water have been treated and released into the Missouri River from two similar water treatment facilities at the site and the nearby Quarry. On September 30, 1999, dewatering efforts at the Chemical Plant site were completed, meeting one of the most substantial milestones of the project and bringing to an end a part of history that was started nearly 5 decades ago. From 1955 to 1966, uranium materials were processed at the U.S. Atomic Energy Commission's Uranium Feed Materials Plant. The ore was processed in a nitric acid solution that separated the uranium from other chemicals. The by-product, called raffinate, was neutralized with lime, then placed in four settling basins,

435

water from the CO  

NLE Websites -- All DOE Office Websites (Extended Search)

water from the CO water from the CO 2 stream and then compresses the dry CO 2 to a supercritical phase. The compressed CO 2 then travels through a 1 mile- long pipeline to the wellhead where it is injected into the Mt. Simon Sandstone at a depth of about 7,000 feet. November 21, 2011, http:// www.netl.doe.gov/publications/press/2011/111121_co2_injection. html. Fossil Energy Techline, "Midwest Has Potential to Store Hundreds of Years of CO 2 Emissions." Injection field tests conducted by the Midwest Regional Carbon Sequestration Partnership (MRCSP) indicate that their region has the geologic potential to store hundreds of years of regional carbon dioxide (CO 2 ) emissions primarily in deep saline formations. The MRCSP Phase II field tests included seven small-scale field validation tests: three

436

$69 solar water heater  

SciTech Connect

The construction of a batch or breadbox solar water heater is described in which it is assumed that an old refrigerator and used galvanized air compressor tank are available (at no charge). Additional materials required (plumbing, hardware, lumber, and miscellaneous) cost approximately $69. The refrigerator serves as an insulated box as well as a built-in hinged adjustable reflector (the door). The door also provides tight-fitting nighttime insulation. Detailed directions are provided for the construction of the solar water heater; the principal operations involve modification of the refrigerator, plumbing the tank, constructing the glazing section, and tilting the collector properly. Ample illustrations are provided and a complete list of materials needed is included. The project can be completed in one day. (MJJ)

Morris, E.

1980-09-01T23:59:59.000Z

437

September 2004 Water Sampling  

Office of Legacy Management (LM)

Sampling at the Sampling at the Shirley Basin South, Wyoming, Disposal Site September 2013 LMS/SBS/S00613 This page intentionally left blank U.S. Department of Energy DVP-June 2013, Shirley Basin South, Wyoming September 2013 RIN 13065426 Page i Contents Sampling Event Summary ...............................................................................................................1 Shirley Basin South, Wyoming, Disposal Site Sample Location Map ............................................3 Data Assessment Summary ..............................................................................................................5 Water Sampling Field Activities Verification Checklist .............................................................7

438

September 2004 Water Sampling  

Office of Legacy Management (LM)

Old and New Rifle, Old and New Rifle, Colorado, Processing Sites August 2013 LMS/RFN/RFO/S00613 This page intentionally left blank U.S. Department of Energy DVP-June 2013, Rifle, Colorado August 2013 RIN 13065380 Page i Contents Sampling Event Summary ...............................................................................................................1 Sample Location Map, New Rifle, Colorado, Processing Site ........................................................5 Sample Location Map, Old Rifle, Colorado, Processing Site ..........................................................6 Data Assessment Summary ..............................................................................................................7 Water Sampling Field Activities Verification Checklist .............................................................9

439

September 2004 Water Sampling  

Office of Legacy Management (LM)

Green River, Utah, Disposal Site Green River, Utah, Disposal Site August 2013 LMS/GRN/S00613 This page intentionally left blank U.S. Department of Energy DVP-June 2013, Green River, Utah August 2013 RIN 13065402 Page i Contents Sampling Event Summary ...............................................................................................................1 Data Assessment Summary ..............................................................................................................7 Water Sampling Field Activities Verification Checklist .............................................................9 Laboratory Performance Assessment ........................................................................................11 Sampling Quality Control Assessment ......................................................................................18

440

September 2004 Water Sampling  

NLE Websites -- All DOE Office Websites (Extended Search)

and October 2013 and October 2013 Groundwater Sampling at the Bluewater, New Mexico, Disposal Site December 2013 LMS/BLU/S00813 This page intentionally left blank U.S. Department of Energy DVP-August and October 2013, Bluewater, New Mexico December 2013 RIN 13085537 and 13095651 Page i Contents Sampling Event Summary ...............................................................................................................1 Private Wells Sampled August 2013 and October 2013, Bluewater, NM, Disposal Site ................3 Data Assessment Summary ..............................................................................................................5 Water Sampling Field Activities Verification Checklist .............................................................7

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

WATER COOLED RETORT COVER  

DOE Patents (OSTI)

A retort cover is designed for use in the production of magnesium metal by the condensation of vaporized metal on a collecting surface. The cover includes a condensing surface, insulating means adjacent to the condensing surface, ind a water-cooled means for the insulating means. The irrangement of insulation and the cooling means permits the magnesium to be condensed at a high temperature and in massive nonpyrophoric form. (AEC)

Ash, W.J.; Pozzi, J.F.

1962-05-01T23:59:59.000Z

442

WATER RESOURCES NEWS NEBRASKA WATER RESOURCES RESEARCH INSTITUTE  

E-Print Network (OSTI)

system for the .Atlantic Richfield Hanford Company which will accept models of ground-water conditions operations on the Hanford ground-water regime which moves through ancient sand and gravel channels deep under environmental impacts as essential factors in the planning, design and construction of water resources projects

Nebraska-Lincoln, University of

443

EPA Final Ground Water Rule  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Nuclear Safety and Environment Office of Nuclear Safety and Environment Nuclear Safety and Environment Information Brief HS-20-IB-2007-02 (March 2007) EPA Final Ground Water Rule Safe Drinking Water Act: National Primary Drinking Water Regulations Ground Water Rule - 40 CFR Parts 9, 141 and 142 Final Rule: 71 FR 65574 Effective Date: January 8, 2007 1 RULE SYNOPSIS On November 8, 2006, the U.S. Environmental Protection Agency (EPA) published a final Ground Water Rule (GWR) to promote increased protection against microbial pathogens that may be present in public water systems (PWSs) that use ground water sources for their supply (these systems are known as ground water systems). This Rule establishes a risk-targeted approach

444

On the dead water phenomenon  

E-Print Network (OSTI)

We give an explicit solution to the phenomenon of internal waves with a still water surface, called dead water, on the basis of the Gerstner wave solution to the Euler equations.

Stuhlmeier, Raphael

2013-01-01T23:59:59.000Z

445

Synchrotrons Explore Water's Molecular Mysteries  

NLE Websites -- All DOE Office Websites (Extended Search)

fluoride crystal. This surface was expected to stimulate ice formation, but even when chilled to a temperature of about 6.5 F-well below water's normal freezing point-the water...

446

ARM - Measurement - Ice water content  

NLE Websites -- All DOE Office Websites (Extended Search)

to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Ice water content The concentration (massvol) of ice water particles in a cloud....

447

Atmospheric Water Vapor over China  

Science Conference Proceedings (OSTI)

Chinese radiosonde data from 1970 to 1990 are relatively homogeneous in time and are used to examine the climatology, trends, and variability of China’s atmospheric water vapor content. The climatological distribution of precipitable water (PW) ...

Panmao Zhai; Robert E. Eskridge

1997-10-01T23:59:59.000Z

448

Distribution of Water in Hailstones  

Science Conference Proceedings (OSTI)

A large number of photographs of thin sections of quenched hailstones have been studied to determine the most common patterns of water distribution within hailstones. The way in which water is distributed throughout the hailstone determines which ...

Petr Chýlek; B. R. D. Gupta; Nancy C. Knight; Charles A. Knight

1984-10-01T23:59:59.000Z

449

Fiber-Optic Long-Line Position Sensor - Energy Innovation Portal  

Description Large-scale rotary drilling for oil and gas, minerals, and water wells have a need for measuring the depth of drill bits and pipe segments.

450

Hydrogen isotope separation from water  

DOE Patents (OSTI)

A process for separating tritium from tritium-containing water or deuterium enrichment from water is described. The process involves selective, laser-induced two-photon excitation and photodissociation of those water molecules containing deuterium or tritium followed by immediate reaction of the photodissociation products with a scavenger gas which does not substantially absorb the laser light. The reaction products are then separated from the undissociated water. (auth)

Jensen, R.J.

1975-09-01T23:59:59.000Z

451

HEPTAFLUOROPROPANE WITH WATER SPRAY COOLING ...  

Science Conference Proceedings (OSTI)

HEPTAFLUOROPROPANE WITH WATER SPRAY COOLING SYSTEM AS A TOTAL ... and evaluation studies on active and passive fire protection ...

2011-10-13T23:59:59.000Z

452

Assessment of Water Balance Models  

Science Conference Proceedings (OSTI)

Power generating plants perform water balance studies for a variety of reasons, and they use a range of different modeling approaches and tools to accomplish their specific objectives. This EPRI report presents the results of a project conducted with the objective of providing the industry and the interested public with an assessment of the value of water balance models to conserve and manage water. The report provides an overview of the state-of-the-art water balance models and identifies ...

2013-10-29T23:59:59.000Z

453

Water-Using Equipment: Domestic  

SciTech Connect

Water management is an important aspect of energy engineering. This article addresses water-using equipment primarily used for household purposes, including faucets, showers, toilets, urinals, dishwashers, and clothes washers, and focuses on how the equipment can be optimized to save both water and energy. Technology retrofits and operation and maintenance changes are the primary methods discussed for water and energy conservation. Auditing to determine current consumption rates is also described for each technology.

Solana, Amy E.; McMordie-Stoughton, Katherine L.

2006-01-24T23:59:59.000Z

454

Water Quantity | Open Energy Information  

Open Energy Info (EERE)

Quantity Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleWaterQuantity&oldid612364...

455

A Novel Process for Demulsification of Water-in-Crude Oil Emulsions by Dense Carbon Dioxide  

E-Print Network (OSTI)

using a wide variety of equipments such as centrifuges, rotary vacuum filters, belt presses, and filter concentrations behave as a liquid, with Newtonian flow characteristics. Centrifugal dewater- ing is possible obtained, which was considered acceptable since a dry- ing system followed centrifugation. Pressure filters

Kilpatrick, Peter K.

456

Efficient Water Use & Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Use Water Use Goal 4: Efficient Water Use & Management Aware of the arid climate of northern New Mexico, water reduction and conservation remains a primary concern at LANL. Energy Conservation» Efficient Water Use & Management» High Performance Sustainable Buildings» Greening Transportation» Green Purchasing & Green Technology» Pollution Prevention» Science Serving Sustainability» ENVIRONMENTAL SUSTAINABILITY GOALS at LANL Sanitary Effluent Reclamation Facility: Using reverse osmosis to superpurify water reduces bacterial growth and mineral build up, allowing the system to circulate water up to four times in the High-Performance Computing Center. LANSCE cooling towers circulate water for evaporative cooling. LANL is testing methods for decreased water and chemical use at this location. Gabriel C. Herrera of LANL checks gauges on piping inside the Sanitary Effluent Reclamation Facility (SERF). Sanitary Effluent Reclamation Facility: In an effort to reduce water consumption, the SERF was constructed to treat and process sanitary effluent water used for cooling the supercomputing facilities. Sandia Canyon: Water from the SERF is used to keep the wetlands healthy to transform hexavalent into trivalent chromium.

457

Open Cooling Water Chemistry Guideline  

Science Conference Proceedings (OSTI)

State-of-the-art chemistry programs help to ensure the continued operation of open cooling water systems while mitigating corrosion and fouling mechanisms. This document, Open Cooling Water Chemistry Guideline, prepared by a committee of industry experts, reflects field and laboratory data on corrosion and fouling issues of open cooling systems.BackgroundService Water System Chemical Addition Guideline (Electric Power Research Institute ...

2012-09-17T23:59:59.000Z

458

REGIONAL WATER SUPPLY PLANNING AND  

E-Print Network (OSTI)

accepted standards, which is an important planning aspect for water supply agencies. Yeh et al. (2000CHAPTER 3 REGIONAL WATER SUPPLY PLANNING AND CAPACITY EXPANSION MODELS Messele Z. Ejeta California Department of Water Resources Sacramento, California Larry W. Mays Department of Civil and Environmental

Mays, Larry W.

459

Tiered Analysis of Water Sustainability  

Science Conference Proceedings (OSTI)

This report presents a preliminary analysis of a "toolkit" to evaluate water availability constraints and options to address these constraints for existing and future electric power generation. This report will be useful to electric power company environment, planning, and water acquisition staff and water resource stakeholders and managers.

2009-03-12T23:59:59.000Z

460

Produced water associated with the  

E-Print Network (OSTI)

Summary: Produced water associated with the oil and gas (O&G) industry annually introduces hundreds of billions of gallons of brackish wastewa- ter in the U.S. alone. Most produced water is highly saline companies pay to have this contaminated produced water trucked to reinjection sites for disposal--an expen

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Drinking Water Problems: Radionuclides (Spanish)  

E-Print Network (OSTI)

Radionuclides in drinking water can cause serious health problems for people. This publication explains what the sources of radionuclides in water are, where high levels have been found in Texas, how they affect health and how to treat water to remove them.

Lesikar, Bruce J.; Melton, Rebecca; Hare, Michael; Hopkins, Janie; Dozier, Monty

2006-12-21T23:59:59.000Z

462

Enhanced oil recovery water requirements  

SciTech Connect

Water requirements for enhanced oil recovery (EOR) are evaluated using publicly available information, data from actual field applications, and information provided by knowledgeable EOR technologists in 14 major oil companies. Water quantity and quality requirements are estimated for individual EOR processes (steam drive; in situ combustion; and CO/sub 2/, micellar-polymer, polymer, and caustic flooding) in those states and specific geographic locations where these processes will play major roles in future petroleum production by the year 2000. The estimated quantity requirements represent the total water needed from all sources. A reduction in these quantities can be achieved by reinjecting all of the produced water potentially available for recycle in the oil recovery method. For injection water quality requirements, it is noted that not all of the water used for EOR needs to be fresh. The use of treated produced water can reduce significantly the quantities of fresh water that would be sought from other sources. Although no major EOR project to date has been abandoned because of water supply problems, competing regional uses for water, drought situations, and scarcity of high quality surface water and ground water could be impediments to certain projects in the near future.

Royce, B.; Kaplan, E.; Garrell, M.; Geffen, T.M.

1983-03-01T23:59:59.000Z

463

Our Environment in Hot Water: Comparing Water Heaters, A Life Cycle Approach Comparing Tank and Tankless Water Heaters in California  

E-Print Network (OSTI)

Study on Eco-Design of Water Heaters, Van Holstein en Kemnaand Assessment” in Water Heating Rulemaking TechnicalG. Smith, Tankless Gas Water Heaters: Oregon Market Status,

Lu, Alison

2011-01-01T23:59:59.000Z

464

Does it Hold Water? Repudiating the "Singular Entity" or "Unitary Waters" Approach to the Clean Water Act  

E-Print Network (OSTI)

demonstrates that the intake water is drawn from the samedemonstrates that the intake water is drawn from the samean industrial user "intake credits" for water withdrawn from

Sattizahn, Gregory L.

2005-01-01T23:59:59.000Z

465

Drain Water Heat Recovery | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Drain Water Heat Recovery Drain Water Heat Recovery Drain Water Heat Recovery June 15, 2012 - 6:20pm Addthis Diagram of a drain water heat recovery system. Diagram of a drain water heat recovery system. How does it work? Use heat from water you've already used to preheat more hot water, reducing your water heating costs. Any hot water that goes down the drain carries away energy with it. That's typically 80%-90% of the energy used to heat water in a home. Drain-water (or greywater) heat recovery systems capture this energy from water you've already used (for example, to shower, wash dishes, or wash clothing) to preheat cold water entering the water heater or going to other water fixtures. This reduces the amount of energy needed for water heating. How It Works Drain-water heat recovery technology works well with all types of water

466

Drain Water Heat Recovery | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Drain Water Heat Recovery Drain Water Heat Recovery Drain Water Heat Recovery June 15, 2012 - 6:20pm Addthis Diagram of a drain water heat recovery system. Diagram of a drain water heat recovery system. How does it work? Use heat from water you've already used to preheat more hot water, reducing your water heating costs. Any hot water that goes down the drain carries away energy with it. That's typically 80%-90% of the energy used to heat water in a home. Drain-water (or greywater) heat recovery systems capture this energy from water you've already used (for example, to shower, wash dishes, or wash clothing) to preheat cold water entering the water heater or going to other water fixtures. This reduces the amount of energy needed for water heating. How It Works Drain-water heat recovery technology works well with all types of water

467

WATER FOR LIFE Module on Life in the Water and the Water Sanitation Process Created for SPICE GK  

E-Print Network (OSTI)

Water for Life ” module which includes topic areas on bacterial life in the water, water borne pathogens, and water sanitation. Students will be exposed to and learn about the importance of water to life on earth, the concerns with water borne pathogens worldwide, and processes of water sanitation. Lesson 1 “We Need Clean Water”. Students are introduced to terminology and basic facts on water sanitation and water borne pathogens in order to provide a purpose as to why we should study water quality. Lesson 2 “ What is in that water? Bacterial load and Water Quality Experiment. ” In this lesson students conduct an experiment in which they measure the bacterial load (amount of bacteria) in 4 different types of water and examine the effect of UV disinfection on the water samples bacterial populations. Lesson 3 “Water Sanitation Article and Research Essay. ” Students gain background knowledge from reading an article on water sanitation. They will

Program Elisa Livengood; Carmella O’steen

2008-01-01T23:59:59.000Z

468

Molecular water oxidation catalyst  

DOE Patents (OSTI)

A dimeric composition of the formula: ##STR1## wherein L', L", L'", and L"" are each a bidentate ligand having at least one functional substituent, the ligand selected from bipyridine, phenanthroline, 2-phenylpyridine, bipyrimidine, and bipyrazyl and the functional substituent selected from carboxylic acid, ester, amide, halogenide, anhydride, acyl ketone, alkyl ketone, acid chloride, sulfonic acid, phosphonic acid, and nitro and nitroso groups. An electrochemical oxidation process for the production of the above functionally substituted bidentate ligand diaqua oxo-bridged ruthenium dimers and their use as water oxidation catalysts is described.

Gratzel, Michael (St. Sulpice, CH); Munavalli, Shekhar (Bel Air, MD); Pern, Fu-Jann (Lakewood, CO); Frank, Arthur J. (Lakewood, CO)

1993-01-01T23:59:59.000Z

469

Trimodal steady water waves  

E-Print Network (OSTI)

We construct three-dimensional families of small-amplitude gravity-driven rotational steady water waves on finite depth. The solutions contain counter-currents and multiple crests in each minimal period. Each such wave generically is a combination of three different Fourier modes, giving rise to a rich and complex variety of wave patterns. The bifurcation argument is based on a blow-up technique, taking advantage of three parameters associated with the vorticity distribution, the strength of the background stream, and the period of the wave.

Mats Ehrnström; Erik Wahlén

2013-10-31T23:59:59.000Z

470

Water heater control module  

DOE Patents (OSTI)

An advanced electric water heater control system that interfaces with a high temperature cut-off thermostat and an upper regulating thermostat. The system includes a control module that is electrically connected to the high-temperature cut-off thermostat and the upper regulating thermostat. The control module includes a switch to open or close the high-temperature cut-off thermostat and the upper regulating thermostat. The control module further includes circuitry configured to control said switch in response to a signal selected from the group of an autonomous signal, a communicated signal, and combinations thereof.

Hammerstrom, Donald J

2013-11-26T23:59:59.000Z

471

NETL Water Paper Draft 2  

NLE Websites -- All DOE Office Websites (Extended Search)

` ` ADDRESSING THE CRITICAL LINK BETWEEN FOSSIL ENERGY AND WATER The Department of Energy/Office of Fossil Energy's Water-Related Research, Development, and Demonstration Programs Contributing Authors: Thomas Feeley, DOE/NETL John Duda, DOE/NETL Lindsay Green, SAIC Robert Kleinmann, DOE/NETL James Murphy, SAIC Terry Ackman, DOE/NETL Jeffrey Hoffmann, DOE/NETL DOE/FE Energy-Water RD&D Programs, October 2005 October 2005 DOE/FE Energy-Water RD&D Programs, October 2005 This Page Intentionally Left Blank. DOE/FE Energy-Water RD&D Programs, October 2005 TABLE OF CONTENTS INTRODUCTION ........................................................................................................................................

472

CHIMNEY FOR BOILING WATER REACTOR  

DOE Patents (OSTI)

A boiling-water reactor is described which has vertical fuel-containing channels for forming steam from water. Risers above the channels increase the head of water radially outward, whereby water is moved upward through the channels with greater force. The risers are concentric and the radial width of the space between them is somewhat small. There is a relatively low rate of flow of water up through the radially outer fuel-containing channels, with which the space between the risers is in communication. (AE C)

Petrick, M.

1961-08-01T23:59:59.000Z

473

USGS Annual Water Data Reports  

SciTech Connect

Water resources data are published annually for use by engineers, scientists, managers, educators, and the general public. These archival products supplement direct access to current and historical water data provided by the National Water Information System (NWIS). Beginning with Water Year 2006, annual water data reports are available as individual electronic Site Data Sheets for the entire Nation for retrieval, download, and localized printing on demand. National distribution includes tabular and map interfaces for search, query, display and download of data. Data provided include extreme and mean discharge rates.

None

2012-04-01T23:59:59.000Z

474

Chapter 10 Water Quality Standards (Kentucky)  

Energy.gov (U.S. Department of Energy (DOE))

This administrative regulation establishes procedures to protect the surface waters of the Commonwealth, and thus protect water resources. It states the designated uses of surface water and...

475

Water Power Forum | OpenEI Community  

Open Energy Info (EERE)

Notices My stuff Energy blogs Login | Sign Up Search Facebook icon Twitter icon Water Power Forum Home > Water Power Forum > Posts by term > Water Power Forum Content Group...

476

Water application related to oil shale listed  

SciTech Connect

A water right application filed by the Rio Blanco Oil Shale Company, Inc. is reported for surface waters and ground water in Rio Blanco County, Colorado.

1986-09-01T23:59:59.000Z

477

California Water and the Rhetoric of Crisis  

E-Print Network (OSTI)

planner specializing in water managment, and isinterested in California water policy and groundwaterBerkeley on conjunctive water management in the San Joaquin

Pollak, Josh

2010-01-01T23:59:59.000Z

478

Water Data Report: An Annotated Bibliography  

E-Print Network (OSTI)

Communications. New Mexico Water Conservation Program. (Lastincluding A Water Conservation Guide for Commercial,The Potential for Urban Water Conservation in California.

Dunham Whitehead, Camilla; Melody, Moya

2007-01-01T23:59:59.000Z

479

Potential Water and Energy Savings from Showerheads  

E-Print Network (OSTI)

the California Urban Water Conservation Council through thethe California Urban Water Conservation Council. While thisto prioritize showerhead water conservation programs. In a

Biermayer, Peter J.

2005-01-01T23:59:59.000Z

480

Handbook of Water Use and Conservation  

E-Print Network (OSTI)

more of the myriad water conservation measures described inthe 21st century, water conservation is looking far moreup her claim that water conservation represents "The Great

Cohen, Russell A.

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland water rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Tahoe Water Systems | Open Energy Information  

Open Energy Info (EERE)

Tahoe Water Systems Jump to: navigation, search Name Tahoe Water Systems Sector Solar, Wind energy Product Develops a self-contained solarwind based water pumping technology....

482

Definition: Surface Water Sampling | Open Energy Information  

Open Energy Info (EERE)

Water Sampling Jump to: navigation, search Dictionary.png Surface Water Sampling Water sampling is done to characterize the chemical, thermal, or hydrological properties of a...

483

Westlands Water District | Open Energy Information  

Open Energy Info (EERE)

Westlands Water District Jump to: navigation, search Name Westlands Water District Place California Sector Solar Product Water district in central California which administers a...

484

A new approach to water desalination  

NLE Websites -- All DOE Office Websites (Extended Search)

new approach to water desalination A new approach to water desalination Graphene sheets with precisely controlled pores have potential to purify water more efficiently than...

485

NETL Water and Power Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Water and Power Plants Review Water and Power Plants Review A review meeting was held on June 20, 2006 of the NETL Water and Power Plants research program at the Pittsburgh NETL site. Thomas Feeley, Technology Manager for the Innovations for Existing Plants Program, gave background information and an overview of the Innovations for Existing Plants Water Program. Ongoing/Ending Projects Alternative Water Sources Michael DiFilippo, a consultant for EPRI, presented results from the project "Use of Produced Water in Recirculated Cooling Systems at Power Generating Facilities". John Rodgers, from Clemson University, presented results from the project "An Innovative System for the Efficient and Effective Treatment of Non-traditional Waters for Reuse in Thermoelectric Power Generation".

486

Water inventory management in condenser pool of boiling water reactor  

DOE Patents (OSTI)

An improved system for managing the water inventory in the condenser pool of a boiling water reactor has means for raising the level of the upper surface of the condenser pool water without adding water to the isolation pool. A tank filled with water is installed in a chamber of the condenser pool. The water-filled tank contains one or more holes or openings at its lowermost periphery and is connected via piping and a passive-type valve (e.g., squib valve) to a high-pressure gas-charged pneumatic tank of appropriate volume. The valve is normally closed, but can be opened at an appropriate time following a loss-of-coolant accident. When the valve opens, high-pressure gas inside the pneumatic tank is released to flow passively through the piping to pressurize the interior of the water-filled tank. In so doing, the initial water contents of the tank are expelled through the openings, causing the water level in the condenser pool to rise. This increases the volume of water available to be boiled off by heat conducted from the passive containment cooling heat exchangers. 4 figs.

Gluntz, Douglas M. (San Jose, CA)

1996-01-01T23:59:59.000Z

487

Water inventory management in condenser pool of boiling water reactor  

DOE Patents (OSTI)

An improved system for managing the water inventory in the condenser pool of a boiling water reactor has means for raising the level of the upper surface of the condenser pool water without adding water to the isolation pool. A tank filled with water is installed in a chamber of the condenser pool. The water-filled tank contains one or more holes or openings at its lowermost periphery and is connected via piping and a passive-type valve (e.g., squib valve) to a high-pressure gas-charged pneumatic tank of appropriate volume. The valve is normally closed, but can be opened at an appropriate time following a loss-of-coolant accident. When the valve opens, high-pressure gas inside the pneumatic tank is released to flow passively through the piping to pressurize the interior of the water-filled tank. In so doing, the initial water contents of the tank are expelled through the openings, causing the water level in the condenser pool to rise. This increases the volume of water available to be boiled off by heat conducted from the passive containment cooling heat exchangers. 4 figs.

Gluntz, D.M.

1996-03-12T23:59:59.000Z

488

WATER BOILER REACTOR  

DOE Patents (OSTI)

As its name implies, this reactor utilizes an aqueous solution of a fissionable element salt, and is also conventional in that it contains a heat exchanger cooling coil immersed in the fuel. Its novelty lies in the utilization of a cylindrical reactor vessel to provide a critical region having a large and constant interface with a supernatant vapor region, and the use of a hollow sleeve coolant member suspended from the cover assembly in coaxial relation with the reactor vessel. Cool water is circulated inside this hollow coolant member, and a gap between its outer wall and the reactor vessel is used to carry off radiolytic gases for recombination in an external catalyst chamber. The central passage of the coolant member defines a reflux condenser passage into which the externally recombined gases are returned and condensed. The large and constant interface between fuel solution and vapor region prevents the formation of large bubbles and minimizes the amount of fuel salt carried off by water vapor, thus making possible higher flux densities, specific powers and power densities.

King, L.D.P.

1960-11-22T23:59:59.000Z

489

Does it Hold Water? Repudiating the "Singular Entity" or "Unitary Waters" Approach to the Clean Water Act  

E-Print Network (OSTI)

project was flood control, water conservation, and drainage.LAW [Vol. 23:101 rejoin the waters of the canal. 77 Thequality in both individual water bodies and the waters of

Sattizahn, Gregory L.

2005-01-01T23:59:59.000Z

490

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Use of Air2Air™ Technology to Recover Fresh-Water from the Normal Evaporative Cooling Loss at Coal-Based Thermoelectric Power Plants – SPX Cooling Systems Use of Air2Air™ Technology to Recover Fresh-Water from the Normal Evaporative Cooling Loss at Coal-Based Thermoelectric Power Plants – SPX Cooling Systems In this project, SPX Cooling Systems, formerly Marley Cooling Technologies, Inc., evaluates the performance of its patented Air2Air(tm) condensing technology in cooling tower applications at coal-fired electric power plants. Researchers quantify Air2Air(tm) water conservation capabilities with results segmented by season and time of day. They determine the pressure drop and energy use during operation. Additionally, SPX Cooling Systems develops a collection method for the recovered water, analyzes water quality, and identifies potential on-site processes capable of utilizing the recovered water.

491

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Application of Pulsed Electrical Fields for Advanced Cooling in Coal-Fired Power Plants Application of Pulsed Electrical Fields for Advanced Cooling in Coal-Fired Power Plants Drexel University is conducting research with the overall objective of developing technologies to reduce freshwater consumption at coal-fired power plants. The goal of this research is to develop a scale-prevention technology based on a novel filtration method and an integrated system of physical water treatment in an effort to reduce the amount of water needed for cooling tower blowdown. This objective is being pursued under two coordinated, National Energy Technology Laboratory sponsored research and development projects. In both projects, pulsed electrical fields are employed to promote the precipitation and removal of mineral deposits from power plant cooling water, thereby allowing the water to be recirculated for longer periods of time before fresh makeup water has to be introduced into the cooling water system.

492

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Plant Water Management Power Plant Water Management A Synergistic Combination of Advanced Separation and Chemical Scale Inhibitor Technologies for Efficient Use of Impaired Water as Cooling Water in Coal-Based Power Plants – Nalco Company Example of Pipe Scaling The overall objective of this project, conducted by Nalco Company in partnership with Argonne National Laboratory, is to develop advanced-scale control technologies to enable coal-based power plants to use impaired water in recirculating cooling systems. The use of impaired water is currently challenged technically and economically due to additional physical and chemical treatment requirements to address scaling, corrosion, and biofouling. Nalco's research focuses on methods to economically manage scaling issues (see Figure 1). The overall approach uses synergistic

493

Spatial Water Balance in Texas  

E-Print Network (OSTI)

Water availability is critical to the economy in the state of Texas. Numerous reservoirs and conveyance structures have been constructed across the State to meet the water supply needs of farmers, municipalities, industries, and power generating facilities. Despite this extensive water management system, water supply remains a concern because of increasing populations and uncertainties about climate stability. The rainfall map of Texas shown in Figure 1.1 clearly shows that water management is a spatial problem. The State as a whole receives about 711 mm year-1 of rainfall, while the area of the State east of the 100th meridian receives 890 mm year-1 and the area west of the 100th meridian receives only 457 mm year-1. In addition to water supply concerns, the assessment of non-point source pollution is another important issue that is largely dependent on the spatial distribution of runoff. Although, the focus of this report is not to address water supply or pollution issues directly, an improved understanding of the spatial water balance - the partitioning of precipitation between evaporation, runoff, and groundwater recharge at different points in space - will directly benefit those who wish to assess water resource availability and non-point source pollution potential across the State. The goal of this study was to gain an improved understanding of the stocks of water in different components (air, soil, water bodies) of the hydrologic cycle and the fluxes between these components. A basic approach for determining stocks and fluxes involves the calculation of a water balance. A water balance, applied to a particular control volume, is an application of the law of conservation of mass which states that matter cannot be created or destroyed. To achieve a balance, the rate of change of storage of water within the control volume must be equal to the difference between its rates of inflow and outflow across the control surface. In this study, three independent water balance models were constructed to model different components of the hydrologic cycle - an atmospheric water balance, a soil-water balance, and a surface water balance. These models were constructed using a geographic information system (GIS). A GIS provides a framework for storing and manipulating spatial data and facilitates modeling on control volumes of various sizes and shapes. In all three cases, the choice of modeling unit was driven by the resolution and characteristics of the input data. The control volumes for the atmospheric, soil, and surface water balance models respectively are (1) an imaginary column confined horizontally by the boundary of Texas and extending to the 300 mb pressure level, (2) 0.5° cells with a depth equal to the plant-extractable water capacity of the soil, and (3) 166 gaged watersheds of differing sizes and shapes. Neither the atmospheric nor the surface water balance involve any simulation of physical processes and are simply mass balances based on empirical data. The soil-water balance does attempt to simulate evaporation from the soil through the use of a soil-moisture extraction function. Both the atmospheric and soil-water balance models are time-varying models, while the surface water balance model is steady-state and uses an empirical relationship to estimate mean annual runoff and evaporation in ungaged areas. One advantage of making three independent water balance calculations is that checks for consistency can be made among the three models. For example, all three models yield an estimate of actual evapotranspiration which is a difficult quantity to estimate, particularly at the regional scale. Previous studies at the scale of Texas have estimated only evaporation from open water surfaces and potential evapotranspiration from the land surface (TDWR, 1983; Dugas and Ainsworth, 1983).

Reed, Seann; Maidment, David; Patoux, Jerome

1994-11-01T23:59:59.000Z

494

Centralizing Fish in Water Policy: A case study of water concerns in  

E-Print Network (OSTI)

availability Fish Water diversion and contamination Fracking Infrastructure Southern water security Fracking

Aukema, Brian - ukema, Brian

495

Water Quality Criteria for Intrastate, Interstate, and Coastal Water  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Criteria for Intrastate, Interstate, and Coastal Quality Criteria for Intrastate, Interstate, and Coastal Water (Mississippi) Water Quality Criteria for Intrastate, Interstate, and Coastal Water (Mississippi) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Mississippi Program Type Environmental Regulations

496

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanofiltration Treatment Options for Thermoelectric Power Plant Water Treatment Demands Nanofiltration Treatment Options for Thermoelectric Power Plant Water Treatment Demands Sandia National Laboratories (SNL) is conducting a study on the use of nanofiltration (NF) treatment options to enable use of non-traditional water sources as an alternative to freshwater make-up for thermoelectric power plants. The project includes a technical and economic evaluation of NF for two types of water that contain moderate to high levels of total dissolved solids (TDS): (1) cooling tower recirculating water and (2) produced waters from oil & gas extraction operations. Reverse osmosis (RO) is the most mature and commonly considered option for high TDS water treatment. However, RO is generally considered to be too expensive to make treatment of produced waters for power plant use a feasible application. Therefore, SNL is investigating the use of NF, which could be a more cost effective treatment option than RO. Similar to RO, NF is a membrane-based process. Although NF is not as effective as RO for the removal of TDS (typical salt rejection is ~85 percent, compared to >95 percent for RO), its performance should be sufficient for typical power plant applications. In addition to its lower capital cost, an NF system should have lower operating costs because it requires less pressure to achieve an equivalent flux of product water.

497

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

An Innovative Fresh Water Production Process for Fossil Fired Power Plants An Innovative Fresh Water Production Process for Fossil Fired Power Plants Using Energy Stored in Main Condenser Cooling Water - University of Florida This project replaces the cooling tower in a fossil fired power plant with an innovative diffusion driven desalination (DDD) plant that will render the power plant a net producer of fresh water. The energy required to drive the desalination process comes from the main condenser cooling water, which would otherwise be discharged. Saline water is used to condense the low pressure steam exiting the turbine. The hot, saline water exiting the condenser is sprayed into the top of a diffusion tower. The diffusion tower is filled with high surface area packing material such as that used in air stripping towers to enhance the water/air surface area. Air is blown through the bottom of the tower and becomes humidified. The humidified air goes to a direct-contact condenser where the fresh water is condensed. This process has an advantage over conventional desalination technology in that it may be driven by waste heat with very low thermodynamic availability. Also, cold air is a byproduct of this process which can be used to cool buildings.

498

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Study of the Use of Saline Formations for Combined Thermoelectric Power Plant Water Needs and Carbon Sequestration at a Regional-Scale Sandia National Laboratories (SNL) and the...

499

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

including: assessment of the availability and proximity of impaired waters at twelve power plant locations spanning the major geographic regions of the continental 48 states;...

500

NETL: Water-Energy Interface - Power Plant Water Management  

NLE Websites -- All DOE Office Websites (Extended Search)

in Cooling Towers GE Global Research will develop treatment technologies to enable power plant use of non-traditional waters. Using effective treatment methods to make...