Powered by Deep Web Technologies
Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Inland capture fisheries  

Science Journals Connector (OSTI)

...from a particular water body or for conservation initiatives...exploit common pool resources. Their...access to the water body and resource...fisheries and conservation objectives for...biodiversity in inland waters. J. Fish Biol...

2010-01-01T23:59:59.000Z

2

Inland Navigation Districts and Florida Inland Navigation District Law  

Broader source: Energy.gov (indexed) [DOE]

Inland Navigation Districts and Florida Inland Navigation District Inland Navigation Districts and Florida Inland Navigation District Law (Florida) Inland Navigation Districts and Florida Inland Navigation District Law (Florida) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Florida Program Type Siting and Permitting Provider Florida Inland Navigation District (FIND) The first part of this legislation establishes Inland Navigation Districts,

3

INLAND PORT TRANSPORTATION EVALUATION GUIDE  

E-Print Network [OSTI]

INLAND PORT TRANSPORTATION EVALUATION GUIDE by Robert Harrison, Center for Transportation Research Transportation Institute, The Texas A&M University System; and Jolanda Prozzi, Center for Transportation Research, The University of Texas at Austin CENTER FOR TRANSPORTATION RESEARCH Bureau of Engineering Research

Texas at Austin, University of

4

Inland Wetlands and Water Courses Regulations (Connecticut)  

Broader source: Energy.gov [DOE]

Regulated activities in or near inland wetlands and water courses include the removal or depositing of material, land or water obstruction or alteration, construction, pollution, or water diversion...

5

Refiner Crude Oil Inputs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Day) Refiner Percent Operable Utilization Net Inputs (Refiner and Blender) of Motor Gasoline Blending Comp Net Inputs (Refiner and Blender) of RBOB Blending Components Net...

6

Ecosystem approach to inland fisheries: research needs and implementation strategies  

Science Journals Connector (OSTI)

...fisheries into ecosystem approaches for management of inland waters...natural and social science approaches to address coupled...ecosystem approaches for management of inland waters...natural and social science approaches to address coupled...

2011-01-01T23:59:59.000Z

7

Recycling silver chloride  

Science Journals Connector (OSTI)

Recycling silver chloride ... A simple way to reduce lab cost by recycling silver in the academic lab. ...

Edwin Thall

1981-01-01T23:59:59.000Z

8

Federal Memorandum of Understanding for Hydropower/Federal Inland  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Federal Memorandum of Understanding for Hydropower/Federal Inland Hydropower Working Group < Federal Memorandum of Understanding for Hydropower Jump to: navigation, search Federal Memorandum of Understanding for Hydropower Hydroelectric-collage2.jpg Home Federal Inland Hydropower Working Group Participating Agencies Resources Federal Inland Hydropower Working Group The Federal Inland Hydropower Working Group is made up of 15 federal entities involved in the regulation, management, or development of hydropower resources (including hydrokinetics) in rivers and streams of the

9

Inland Pacific Energy Center | Open Energy Information  

Open Energy Info (EERE)

Pacific Energy Center Pacific Energy Center Jump to: navigation, search Name Inland Pacific Energy Center Place Stanfield, Oregon Sector Biofuels Product Biofuels producer currently developing a portfolio of ethanol and biodiesel projects in Stanfield, Oregon. Coordinates 45.78095°, -119.217704° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.78095,"lon":-119.217704,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

10

ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Bandwidth for Petroleum Refining Processes ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes bandwidth.pdf More Documents & Publications ITP Petroleum...

11

ITP Petroleum Refining: Profile of the Petroleum Refining Industry...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Profile of the Petroleum Refining Industry in California: California Industries of the Future Program ITP Petroleum Refining: Profile of the Petroleum Refining Industry in...

12

MECS 2006- Petroleum Refining  

Broader source: Energy.gov [DOE]

Manufacturing Energy and Carbon Footprint for Petroleum Refining (NAICS 324110) Sector with Total Energy Input, October 2012 (MECS 2006)

13

Petroleum Refining | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Petroleum Refining Petroleum Refining Maintaining the viability of the U.S. petroleum refining industry requires continuous improvement in productivity and energy efficiency. The...

14

Inland Empire Utility Agency (IEUA) | Open Energy Information  

Open Energy Info (EERE)

Inland Empire Utility Agency (IEUA) Inland Empire Utility Agency (IEUA) Jump to: navigation, search Name Inland Empire Utility Agency (IEUA) Facility Inland Empire Utility Agency (IEUA) Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Foundation Windpower Developer Foundation Windpower Energy Purchaser IEUA Location Chino CA Coordinates 34.08495622°, -117.5266421° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":34.08495622,"lon":-117.5266421,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

15

The distribution and phenology of arbuscular mycorrhizae along an inland  

E-Print Network [OSTI]

The distribution and phenology of arbuscular mycorrhizae along an inland salinity gradient I Perry salinity gradient. Roots of Hordeu~njubaru~n,Disrichlis srricra, Agropyron trachycaulum, Sonchus arvensis, fungi, gradient, mycorrhiza, phenology, salinity, vesicles. Resume : Les patrons saisonniers et de

Kenkel, Norm

16

Biocatalysis in Oil Refining  

SciTech Connect (OSTI)

Biocatalysis in Oil Refining focuses on petroleum refining bioprocesses, establishing a connection between science and technology. The micro organisms and biomolecules examined for biocatalytic purposes for oil refining processes are thoroughly detailed. Terminology used by biologists, chemists and engineers is brought into a common language, aiding the understanding of complex biological-chemical-engineering issues. Problems to be addressed by the future R&D activities and by new technologies are described and summarized in the last chapter.

Borole, Abhijeet P [ORNL; Ramirez-Corredores, M. M. [BP Global Fuels Technology

2007-01-01T23:59:59.000Z

17

Inland Power & Light Company | Open Energy Information  

Open Energy Info (EERE)

Power & Light Company Power & Light Company Jump to: navigation, search Name Inland Power & Light Company Address 10110 W. Hallett Road Place Washington Zip 99224 Utility Id 8699 Utility Location Yes Ownership C NERC Location WECC NERC WECC Yes Activity Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] [2] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Contents 1 About 2 Energy Rates 3 Utility Rate Schedules 4 Average Rates 5 References About Inland Power & Light Company is a utility company located in Spokane, Washington, providing power over 38,000 customers. It is the largest cooperative in Washington state. Energy Rates As of April 1, 2010, these are the rates and fees at Inland Power and Light

18

Inland Power and Light Company - Residential Energy Efficiency Rebate  

Broader source: Energy.gov (indexed) [DOE]

Inland Power and Light Company - Residential Energy Efficiency Inland Power and Light Company - Residential Energy Efficiency Rebate Programs Inland Power and Light Company - Residential Energy Efficiency Rebate Programs < Back Eligibility Residential Savings Category Appliances & Electronics Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Sealing Your Home Ventilation Heat Pumps Water Heating Windows, Doors, & Skylights Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Refrigerators/Freezers Recycling: $30 Electric Water Heaters: $25 Refrigerators/Freezers: $25 Clothes Washers: $20 - $50 Energy Star Site Built Home: $1,000 Northwest Energy Efficient Manufactured Home: $1,000 Air-source Heat Pumps (Installed in an All-Electric Home): $1,000

19

A systems-level methodology for the analysis of inland waterway infrastructure disruptions  

Science Journals Connector (OSTI)

Inland waterways are vital to the Nations economic strength, and to the health and welfare of the American people. This paper describes an end-to-end systems analysis methodology for inland waterways that inc...

Steve Folga; Tim Allison; Yazmin Seda-Sanabria

2009-12-01T23:59:59.000Z

20

Optimization of silver-dielectric-silver nanoshell for sensing applications  

SciTech Connect (OSTI)

In this paper, resonance light scattering (RLS) properties of a silver-dielectric-silver nanoshell, based on quasi-static approach and plasmon hybridization theory, are investigated. Scattering spectrum of silver-dielectric-silver nanoshell has two intense and clearly separated RLS peaks and provides a potential for biosensing based on surface plasmon resonance and surface-enhanced Raman scattering. The two RLS peaks in silver-dielectric-silver nanoshell are optimized by tuning the geometrical dimensions. In addition, the optimal geometry is discussed to obtain the high sensitivity of silver-dielectric-silver nanoshell. As the silver core radius increases, the sensitivity of silver-dielectric-silver nanoshell decreases whereas increasing the middle dielectric thickness increases the sensitivity of silver-dielectric-silver nanoshell.

Shirzaditabar, Farzad; Saliminasab, Maryam [Department of Physics, Razi University, Kermanshah 67144-15111 (Iran, Islamic Republic of)] [Department of Physics, Razi University, Kermanshah 67144-15111 (Iran, Islamic Republic of)

2013-08-15T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Effects of Climate Change on Inland Fishes of California  

E-Print Network [OSTI]

Effects of Climate Change on Inland Fishes of California Rebecca M. Quiñones rmquinones@ucdavis.edu Peter B Moyle pbmoyle@ucdavis.edu Center for Watershed Sciences Department of Wildlife, Fish of climate change on aquatic habitats in California · Climate change threats to native fishes · What can we

California at Davis, University of

22

Hirshfeld atom refinement  

Science Journals Connector (OSTI)

The new automated iterative Hirshfeld atom refinement method is explained and validated through comparison of structural models of Gly-L-Ala obtained from synchrotron X-ray and neutron diffraction data at 12, 50, 150 and 295 K. Structural parameters involving hydrogen atoms are determined with comparable precision from both experiments and agree mostly to within two combined standard uncertainties.

Capelli, S.C.

2014-08-29T23:59:59.000Z

23

Issues in adaptive mesh refinement  

SciTech Connect (OSTI)

In this paper, we present an approach for a patch-based adaptive mesh refinement (AMR) for multi-physics simulations. The approach consists of clustering, symmetry preserving, mesh continuity, flux correction, communications, and management of patches. Among the special features of this patch-based AMR are symmetry preserving, efficiency of refinement, special implementation offlux correction, and patch management in parallel computing environments. Here, higher efficiency of refinement means less unnecessarily refined cells for a given set of cells to be refined. To demonstrate the capability of the AMR framework, hydrodynamics simulations with many levels of refinement are shown in both two- and three-dimensions.

Dai, William Wenlong [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

24

Petroleum Refining (2010 MECS) | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Petroleum Refining (2010 MECS) Petroleum Refining (2010 MECS) Manufacturing Energy and Carbon Footprint for Petroleum Refining Sector (NAICS 324110) Energy use data source: 2010...

25

Minimally refined biomass fuel  

DOE Patents [OSTI]

A minimally refined fluid composition, suitable as a fuel mixture and derived from biomass material, is comprised of one or more water-soluble carbohydrates such as sucrose, one or more alcohols having less than four carbons, and water. The carbohydrate provides the fuel source; water solubilizes the carbohydrates; and the alcohol aids in the combustion of the carbohydrate and reduces the vicosity of the carbohydrate/water solution. Because less energy is required to obtain the carbohydrate from the raw biomass than alcohol, an overall energy savings is realized compared to fuels employing alcohol as the primary fuel.

Pearson, Richard K. (Pleasanton, CA); Hirschfeld, Tomas B. (Livermore, CA)

1984-01-01T23:59:59.000Z

26

Inland out: Midwestern river coal transloaders deal with increased pressures  

SciTech Connect (OSTI)

As greater amounts of US western coal is burned by many eastern and south-eastern power plants located along the Ohio River and its tributaries, Midwestern coal transload facilities are playing an ever growing role in the nation's coal transportation system by moving traffic off clogged rail lines onto barges on inland rivers. The article describes operations by three mid-western ports - American Electric Power's (AEP) Cook Terminal in Metropolis, IL; Kinder-Morgan's Cora Terminal in Cora, IL; and Kinder-Morgan's Grand Rivers Terminal near Paducah, KY. Together these terminals transferred more than 30 m tons onto barges in 2006. 5 figs.

Buchsbaum, L.

2007-06-15T23:59:59.000Z

27

Weekly Refiner Net Production  

U.S. Energy Information Administration (EIA) Indexed Site

Refiner Net Production Refiner Net Production (Thousand Barrels per Day) Period: Weekly 4-Week Average Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Product/Region 11/08/13 11/15/13 11/22/13 11/29/13 12/06/13 12/13/13 View History Finished Motor Gasoline 2,168 2,300 2,336 2,359 2,462 2,368 2010-2013 East Coast (PADD 1) 54 53 52 67 71 67 2010-2013 Midwest (PADD 2) 696 745 722 711 798 790 2010-2013 Gulf Coast (PADD 3) 891 916 1,010 1,053 1,011 1,021 2010-2013 Rocky Mountain (PADD 4) 260 248 245 232 279 235 2010-2013 West Coast (PADD 5) 268 338 308 296 302 255 2010-2013 Reformulated 50 49 49 49 48 49 2010-2013 Blended with Ethanol 50 49 49 49 48 49 2010-2013 Other

28

ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes  

Broader source: Energy.gov [DOE]

This energy bandwidth analysis provides a realistic estimate of the energy that may be saved in petroleum refining processes by quantifying measures of energy consumption.

29

ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Refining Processes Prepared by Energetics Incorporated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Industrial Technologies Program...

30

Refines Efficiency Improvement  

SciTech Connect (OSTI)

Refinery processes that convert heavy oils to lighter distillate fuels require heating for distillation, hydrogen addition or carbon rejection (coking). Efficiency is limited by the formation of insoluble carbon-rich coke deposits. Heat exchangers and other refinery units must be shut down for mechanical coke removal, resulting in a significant loss of output and revenue. When a residuum is heated above the temperature at which pyrolysis occurs (340 C, 650 F), there is typically an induction period before coke formation begins (Magaril and Aksenova 1968, Wiehe 1993). To avoid fouling, refiners often stop heating a residuum before coke formation begins, using arbitrary criteria. In many cases, this heating is stopped sooner than need be, resulting in less than maximum product yield. Western Research Institute (WRI) has developed innovative Coking Index concepts (patent pending) which can be used for process control by refiners to heat residua to the threshold, but not beyond the point at which coke formation begins when petroleum residua materials are heated at pyrolysis temperatures (Schabron et al. 2001). The development of this universal predictor solves a long standing problem in petroleum refining. These Coking Indexes have great potential value in improving the efficiency of distillation processes. The Coking Indexes were found to apply to residua in a universal manner, and the theoretical basis for the indexes has been established (Schabron et al. 2001a, 2001b, 2001c). For the first time, a few simple measurements indicates how close undesired coke formation is on the coke formation induction time line. The Coking Indexes can lead to new process controls that can improve refinery distillation efficiency by several percentage points. Petroleum residua consist of an ordered continuum of solvated polar materials usually referred to as asphaltenes dispersed in a lower polarity solvent phase held together by intermediate polarity materials usually referred to as resins. The Coking Indexes focus on the amount of these intermediate polarity species since coke formation begins when these are depleted. Currently the Coking Indexes are determined by either titration or solubility measurements which must be performed in a laboratory. In the current work, various spectral, microscopic, and thermal techniques possibly leading to on-line analysis were explored for measuring the Coking Indexes.

WRI

2002-05-15T23:59:59.000Z

31

Refiner Wholesale Price ...........................  

Gasoline and Diesel Fuel Update (EIA)

Prices (cents per gallon) Prices (cents per gallon) Refiner Wholesale Price ........................... 297 299 302 275 289 290 288 262 275 289 280 257 293 282 276 Gasoline Regular Grade Retail Prices Including Taxes PADD 1 .................................................... 363 366 364 355 361 350 355 331 341 355 347 327 362 349 343 PADD 2 .................................................... 355 366 369 340 350 368 352 318 334 355 346 318 357 347 338 PADD 3 .................................................... 346 353 345 326 339 336 337 307 323 341 329 305 343 330 325 PADD 4 .................................................... 322 374 358 348 323 361 362 326 322 351 348 322 351 344 337 PADD 5 .................................................... 390 413 390 384 382 390 385 355 362 384 379 356 394 378 371 U.S. Average ........................................

32

Re-refining in India  

SciTech Connect (OSTI)

The Indian Institute of Petroleum, Dehra Dun made available its know-how for re-refining used engine oil to about 30 entrepreneurs. Out of these only a handful are utilizing their process. However, there are about 30 members in Petroleum Re-Refiners Association of India. After the certification scheme, as announced by the Ministry of Petroleum, is completed, a true picture would emerge as to the actual number of re-refiners engaged in the proper re-refining of used engine oil. The total consumption of lubricants in India is 500,000 tons of which about 5 percent maximum comes to the recognized re-refining industry and the balance is either burnt or discarded. The Government of India has been encouraging in particular the Government undertakings to set up their own captive units for re-refining but these have not been so successful and the output of captive units is used for topping up purpose. With the establishment of a re-refined engine oil specification and registration of the re-refiners it is hoped that the Government will take a more positive step in encouraging the re-refining industry.

Bhargava, M.K.

1980-11-01T23:59:59.000Z

33

Jonathan Silver | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Jonathan Silver Jonathan Silver About Us Jonathan Silver - Executive Director of the Loan Programs Office Photo of Jonathan Silver Jonathan Silver was named Executive Director of the U.S. Department of Energy's Loan Programs Office in November 2009. Mr. Silver leads the Obama Administration's $70 billion dollar investment program in alternative energy, financing a wide range of solar, wind, geothermal, biofuels, fossil and nuclear energy projects. He also heads the government's $20 billion investment program in advanced automotive technology. As Executive Director, Mr. Silver is responsible for the agency's strategic direction and oversees all of its transactions. He frequently represents the agency before Congress and in public forums. In 2010, Mr. Silver was named one of the country's top ten "influencers"

34

Jonathan Silver | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Jonathan Silver Jonathan Silver About Us Jonathan Silver - Executive Director of the Loan Programs Office Photo of Jonathan Silver Jonathan Silver was named Executive Director of the U.S. Department of Energy's Loan Programs Office in November 2009. Mr. Silver leads the Obama Administration's $70 billion dollar investment program in alternative energy, financing a wide range of solar, wind, geothermal, biofuels, fossil and nuclear energy projects. He also heads the government's $20 billion investment program in advanced automotive technology. As Executive Director, Mr. Silver is responsible for the agency's strategic direction and oversees all of its transactions. He frequently represents the agency before Congress and in public forums. In 2010, Mr. Silver was named one of the country's top ten "influencers"

35

Inland Empire Utilities Agency IEUA | Open Energy Information  

Open Energy Info (EERE)

Agency IEUA Agency IEUA Jump to: navigation, search Name Inland Empire Utilities Agency (IEUA) Place Chino, California Sector Renewable Energy, Services, Solar Product Water utility that also offers renewable energy services through methane gas and solar generation. Coordinates 34.012811°, -117.689328° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":34.012811,"lon":-117.689328,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

36

Inland Power and Light Company - Agricultural Energy Efficiency Rebate  

Broader source: Energy.gov (indexed) [DOE]

Agricultural Energy Efficiency Agricultural Energy Efficiency Rebate Programs Inland Power and Light Company - Agricultural Energy Efficiency Rebate Programs < Back Eligibility Agricultural Savings Category Other Manufacturing Maximum Rebate Custom: 70% or project cost Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Flow controlling type nozzle for impact sprinklers: $4 Rebuilt or New Impact Sprinklers: $3.75 Nozzle for Impact Sprinkler: $1.50 Rotating Type Sprinklers: $4 Gasket: $2.75 Low-Pressure Regulators: $5 Low-Pressure Sprinklers: $4 Multiple Configuration Nozzles: $3 Multi-Trajectory Sprays: $4 Drains for Lines: $1 Hubs for Wheel-Lines: $14.50 "Goose Neck" Elbow for New Drop Tubes: $1.65 Drop Tubes: $3 Center Pivot Base Boot Gasket: $175

37

Refinement in Object-Z and CSP  

Science Journals Connector (OSTI)

In this paper we explore the relationship between refinement in Object-Z and refinement in CSP. We prove with a simple counter-example ... , does not imply failures-divergences refinement in CSP. This contradicts...

Christie Bolton; Jim Davies

2002-01-01T23:59:59.000Z

38

Anomalies in the refinement of isoleucine  

Science Journals Connector (OSTI)

The side-chain torsion angles of isoleucines in X-ray protein structures are a function of resolution, secondary structure and refinement software. Detailing the standard torsion angles used in refinement software can improve protein structure refinement.

Berntsen, K.R.M.

2014-03-19T23:59:59.000Z

39

Nucleic Acid Standards - Refinement Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Refinement Parameters Refinement Parameters The DNA/RNA topology and parameter files for X-PLOR are shown below. These were tested with DNA structures and with protein-DNA complexes. X-PLOR topology file X-PLOR parameter files: X-PLOR parameter file For the refinement of high resolution structures (< 1.7 Angstroms) the parameter file with distinct bond distances and bond angles for both C2'-endo and C3'-endo conformations should be considered: X-PLOR parameter file for high resolution structures "New Parameters for the Refinement of Nucleic Acid Containing Structures." Gary Parkinson, Jaroslav Vojtechovsky, Lester Clowney, Axel Brunger*, and Helen M. Berman. (1996) Acta Cryst. D 52, 57-64 Rutgers University, Department of Chemistry, Piscataway, NJ 08855-0939; *The Howard Hughes Medical Institute and Departments of Molecular and

40

NORTHEAST REGIONAL REFINED PETROLEUM PRODUCT RESERVE | Department...  

Broader source: Energy.gov (indexed) [DOE]

NORTHEAST REGIONAL REFINED PETROLEUM PRODUCT RESERVE NORTHEAST REGIONAL REFINED PETROLEUM PRODUCT RESERVE The Northeast region of the U.S. is particularly vulnerable to gasoline...

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Improving the accuracy of macromolecular structure refinement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and subsequent refinement is challenging at low resolution. We compared refinement methods using synchrotron diffraction data of photosystem I at 7.4 resolution, starting...

42

On-Site Recreation Surveys and Selection Effects: Valuing Open Access Recreation on Inland Waterways  

Science Journals Connector (OSTI)

Inland waterways embrace both commercial and public good types of recreational facility. Commercial recreation extracts some form of payment, for example ... a permit. However, for other types of recreation, such...

Ken Willis; Guy Garrod

1992-01-01T23:59:59.000Z

43

DSm Vector Spaces of Refined Labels  

E-Print Network [OSTI]

In this book the authors introduce the notion of DSm vector spaces of refined labels. They also realize the refined labels as a plane and a n-dimensional space. Further, using these refined labels, several algebraic structures are defined. Finally DSm semivector space or refined labels is described. Authors also propose some research problems.

Kandasamy, W B Vasantha

2011-01-01T23:59:59.000Z

44

DSm Vector Spaces of Refined Labels  

E-Print Network [OSTI]

In this book the authors introduce the notion of DSm vector spaces of refined labels. They also realize the refined labels as a plane and a n-dimensional space. Further, using these refined labels, several algebraic structures are defined. Finally DSm semivector space or refined labels is described. Authors also propose some research problems.

W. B. Vasantha Kandasamy; Florentin Smarandache

2011-12-02T23:59:59.000Z

45

Conformal refinement of unstructured quadrilateral meshes  

SciTech Connect (OSTI)

We present a multilevel adaptive refinement technique for unstructured quadrilateral meshes in which the mesh is kept conformal at all times. This means that the refined mesh, like the original, is formed of only quadrilateral elements that intersect strictly along edges or at vertices, i.e., vertices of one quadrilateral element do not lie in an edge of another quadrilateral. Elements are refined using templates based on 1:3 refinement of edges. We demonstrate that by careful design of the refinement and coarsening strategy, we can maintain high quality elements in the refined mesh. We demonstrate the method on a number of examples with dynamically changing refinement regions.

Garmella, Rao [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

46

Electronic structure of superconductivity refined  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electronic structure of superconductivity refined Electronic structure of superconductivity refined Electronic structure of superconductivity refined A team of physicists propose a new model that expands on a little understood aspect of the electronic structure in high-temperature superconductors. July 10, 2008 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

47

Carbon Emissions: Petroleum Refining Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Petroleum Refining Industry Petroleum Refining Industry Carbon Emissions in the Petroleum Refining Industry The Industry at a Glance, 1994 (SIC Code: 2911) Total Energy-Related Emissions: 79.9 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 21.5% -- Nonfuel Emissions: 16.5 MMTC Total First Use of Energy: 6,263 trillion Btu -- Pct. of All Manufacturers: 28.9% Nonfuel Use of Energy Sources: 3,110 trillion Btu (49.7%) -- Naphthas and Other Oils: 1,328 trillion Btu -- Asphalt and Road Oil: 1,224 trillion Btu -- Lubricants: 416 trillion Btu Carbon Intensity: 12.75 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey", "Monthly Refinery Report" for 1994, and Emissions of Greenhouse Gases in the United States 1998.

48

Used oil re-refining  

SciTech Connect (OSTI)

Used oils, especially used lubricating oils which are normally considered waste and are discarded or burned, are reclaimed for reuse by a re-refining procedure involving the steps of: heat soaking the used oil; distilling the heat soaked oil; passing the distillate through a guard bed of activated material; hydrotreating the guard bed treated distillate under standard hydrotreating conditions. If the used oil to be re-refined contains a quantity of water and/or fuel fraction which the practioner considers sufficiently large to be detrimental, the used oil may be subjected to a dewatering/defueling step prior to being heat soaked.

Reid, L. E.; Ryan, D. G.; Yao, K. C.

1985-04-23T23:59:59.000Z

49

Vacuum State/Refiner/Location  

U.S. Energy Information Administration (EIA) Indexed Site

Vacuum Vacuum State/Refiner/Location Barrels per Atmospheric Crude Oil Distillation Capacity Barrels per Operating Idle Operating Idle Downstream Charge Capacity Thermal Cracking Delayed Fluid Coking Visbreaking Other/Gas Calendar Day Stream Day Distillation Coking Oil Table 3. Capacity of Operable Petroleum Refineries by State as of January 1, 2013 (Barrels per Stream Day, Except Where Noted) ......................................................... Alabama 120,100 0 130,000 0 48,000 32,000 0 0 0 Goodway Refining LLC 4,100 0 5,000 0 0 0 0 0 0 ....................................................................................................................................................................................................

50

ORNL Trusted Corridors Project: Watts Bar Dam Inland Waterway Project  

SciTech Connect (OSTI)

Radiation has existed everywhere in the environment since the Earth's formation - in rocks, soil, water, and plants. The mining and processing of naturally occurring radioactive materials for use in medicine, power generation, consumer products, and industry inevitably generate emissions and waste. Radiological measuring devices have been used by industry for years to measure for radiation in undesired locations or simply identify radioactive materials. Since the terrorist attacks on the United States on 9-11-01 these radiation measuring devices have proliferated in many places in our nation's commerce system. DOE, TVA, the Army Corps and ORNL collaborated to test the usefulness of these devices in our nation's waterway system on this project. The purpose of the Watts Bar Dam ORNL Trusted Corridors project was to investigate the security, safety and enforcement needs of local, state and federal government entities for state-of-the-art sensor monitoring in regards to illegal cargo including utilization of the existing infrastructure. TVA's inland waterways lock system is a recognized and accepted infrastructure by the commercial carrier industry. Safety Monitoring activities included tow boat operators, commercial barges and vessels, recreational watercraft and their cargo, identification of unsafe vessels and carriers, and, monitoring of domestic and foreign commercial vessels and cargo identification. Safety Enforcement activities included cargo safety, tracking, identification of hazardous materials, waterway safety regulations, and hazardous materials regulations. Homeland Security and Law Enforcement Applications included Radiological Dispersive Devices (RDD) identification, identification of unsafe or illicit transport of hazardous materials including chemicals and radiological materials, and screening for shipments of illicit drugs. In the Fall of 2005 the SensorNet funding for the project expired. After several unsuccessful attempts to find a Federal sponsor to continue with the project, the Watts Bar Dam Project was canceled and the Exploranium radiation monitors were removed from the doors of Watts Bar Dam in early 2006. The DHS Domestic Nuclear Detection Office decided to proceed with a Pilot building on the ORNL work performed at the TN and SC weigh stations in the highway sector of the Trusted Corridors project and eventually expanded it to other southern states under the name of Southeastern Corridor Pilot Project (SETCP). Many of the Phase I goals were achieved however real-world test data of private watercraft and barges was never obtained.

Walker, Randy M [ORNL; Gross, Ian G [ORNL; Smith, Cyrus M [ORNL; Hill, David E [ORNL

2011-11-01T23:59:59.000Z

51

Green Petroleum Refining - Mathematical Models for Optimizing Petroleum Refining Under Emission Constraints.  

E-Print Network [OSTI]

??Petroleum refining processes provide the daily requirements of energy for the global market. Each refining process produces wastes that have the capacity to harm the (more)

Ali Yusuf, Yusuf

2013-01-01T23:59:59.000Z

52

Inland Northwest Regional High School Science Bowl | U.S. DOE Office of  

Office of Science (SC) Website

Inland Northwest Regional Inland Northwest Regional High School Science Bowl National Science Bowl® (NSB) NSB Home About High School High School Students High School Coaches High School Regionals High School Rules, Forms, and Resources Middle School Attending National Event Volunteers 2013 Competition Results News Media WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: 202-586-6702 E: National.Science.Bowl@science.doe.gov Washington Regions Inland Northwest Regional High School Science Bowl Print Text Size: A A A RSS Feeds FeedbackShare Page Regional Coordinator Information Name: Kaye Kamp Email: kkamp@whitworth.edu Regional Event Information Date: February 8, 2014 Maximum Number of Teams: 42

53

Inland Northwest Regional Middle School Science Bowl | U.S. DOE Office of  

Office of Science (SC) Website

Regions » Inland Northwest Regions » Inland Northwest Regional Middle School Science Bowl National Science Bowl® (NSB) NSB Home About High School Middle School Middle School Students Middle School Coaches Middle School Regionals Middle School Rules, Forms, and Resources Attending National Event Volunteers 2013 Competition Results News Media WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: 202-586-6702 E: National.Science.Bowl@science.doe.gov Washington Regions Inland Northwest Regional Middle School Science Bowl Print Text Size: A A A RSS Feeds FeedbackShare Page Regional Coordinator Information Name: Kaye Kamp Email: kkamp@whitworth.edu Regional Event Information Date: Saturday, March 1, 2014

54

Synthesis and Characterization of Silver Hollandite and its Applicatio...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Silver Hollandite and its Application in Emission Control. Synthesis and Characterization of Silver Hollandite and its Application in Emission Control. Abstract: Silver hollandite,...

55

A design flow based on modular refinement  

E-Print Network [OSTI]

We propose a practical methodology based on modular refinement to design complex systems. The methodology relies on modules with latency-insensitive interfaces so that the refinements can change the timing contract of a ...

Dave, Nirav H.

56

Sharp Retrenchment, Modulated Refinement and Simulation  

E-Print Network [OSTI]

retrenchment is introduced and briefly justified informally, as a liberalisation of refinement. In sharp as a liberalisation of the notion of refinement, whose purpose was to enable more of the informal aspects of de

Banach, Richard

57

Entitlements exemptions for new refiners  

SciTech Connect (OSTI)

The practice of exempting start-up inventories from entitlement requirements for new refiners has been called into question by the Office of Hearings and Appeals and other responsible Departmental officials. ERA with the assistance of the Office of General Counsel considering resolving the matter through rulemaking; however, by October 26, 1979 no rulemaking had been published. Because of the absence of published standards for use in granting these entitlements to new refineries, undue reliance was placed on individual judgements that could result in inequities to applicants and increase the potential for fraud and abuse. Recommendations are given as follows: (1) if the program for granting entitlements exemptions to new refiners is continued, the Administrator, ERA should promptly take action to adopt an appropriate regulation to formalize the program by establishing standards and controls that will assure consistent and equitable application; in addition, files containing adjustments given to new refiners should be made complete to support benefits already allowed; and (2) whether the program is continued or discontinued, the General Counsel and the Administrator, ERA, should coordiate on how to evaluate the propriety of inventory adjustments previously granted to new refineries.

Not Available

1980-02-29T23:59:59.000Z

58

Reaping Energy Savings from Petroleum Refining  

E-Print Network [OSTI]

REAPING ENERGY SAVINGS FROM PETROLEUM REFINING Alan Deng, Project Manager, San Francisco, CA, Ron Cascone, Project Manager, White Plains, NY, Nexant, Inc. ABSTRACT The refining industry is one of the largest energy users in Pacific Gas.... Market barriers include lack of standards and perceptions of unproven reliability for new technologies in petroleum refining, lack of understanding of the refining process by energy efficiency professionals, lack of capital investment, high up...

Deng, A.; Cascone, R.

2006-01-01T23:59:59.000Z

59

Firing of pulverized solvent refined coal  

DOE Patents [OSTI]

An air-purged burner for the firing of pulverized solvent refined coal is constructed and operated such that the solvent refined coal can be fired without the coking thereof on the burner components. The air-purged burner is designed for the firing of pulverized solvent refined coal in a tangentially fired boiler.

Derbidge, T. Craig (Sunnyvale, CA); Mulholland, James A. (Chapel Hill, NC); Foster, Edward P. (Macungie, PA)

1986-01-01T23:59:59.000Z

60

The Silver Bullet: Storage!  

Broader source: Energy.gov (indexed) [DOE]

West Philly High X-prize PHEV The Silver Bullet... Storage! Terry Boston President & CEO PJM Interconnection July 12, 2011 PJM©2011 2 United States PJM Eastern Interconnection PJM as Part of the Eastern Interconnection KEY STATISTICS PJM member companies 700+ millions of people served 58 peak load in megawatts 158,448 MWs of generating capacity 180,400 miles of transmission lines 61,200 GWh of annual energy 794,335 generation sources 1,365 square miles of territory 211,000 area served 13 states + DC Internal/external tie lines 142 * 24% of generation in Eastern Interconnection * 27% of load in Eastern Interconnection * 19% of transmission assets in Eastern Interconnection 20% of U.S. GDP produced in PJM www.pjm.com As of 6/1/2011 PJM©2011 3 43,623 0 5,000 10,000 15,000

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

ITP Petroleum Refining: Impacts of Condition Assessment on Energy...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

ITP Petroleum Refining: Impacts of Condition Assessment on Energy Use: Selected Applications in Chemicals Processing and Petroleum Refining ITP Petroleum Refining: Impacts of...

62

ITP Petroleum Refining: Energy and Environmental Profile of the...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Environmental Profile of the U.S. Petroleum Refining Industry (November 2007) ITP Petroleum Refining: Energy and Environmental Profile of the U.S. Petroleum Refining Industry...

63

Solar Energy in Inland Southern California: The Future is Now The University of California, Riverside  

E-Print Network [OSTI]

Agenda Solar Energy in Inland Southern California: The Future is Now The University of California Southern California Research Initiative for Solar Energy February 6th 2014, 7:30 am - 6:00 pm and the general public to learn about the state of solar energy by discussing the latest technology, public policy

California at Riverside, University of

64

Solar Energy in Inland Southern California: The Future Is Now Feb. 6, 2014  

E-Print Network [OSTI]

Solar Energy in Inland Southern California: The Future Is Now Feb. 6, 2014 This conference to learn about the state of solar energy by discussing the latest technology, public policy and opportunities for incorporating solar energy in their communities, including how the marketplace works, local

California at Riverside, University of

65

Nuclear gene phylogeography reveals the historical legacy of an ancient inland sea on lineages of the  

E-Print Network [OSTI]

a dataset comprised of one mitochondrial and five nuclear loci, we elucidate the major biogeographicNuclear gene phylogeography reveals the historical legacy of an ancient inland sea on lineages of California. In addition, discordant mitochondrial/ nuclear genetic patterns suggest subsequent gene flow from

Grether, Gregory

66

Application of FLake for the prediction of ice thickness for inland waters in the Netherlands  

E-Print Network [OSTI]

Application of FLake for the prediction of ice thickness for inland waters in the Netherlands Cisco in the Netherlands. In cold spells numerous ditches, canals and lakes get frozen and many people go out for ice in the Netherlands. in ice thickness predictions. KNMI issues ice thickness predictions, based on a model of De Bruin

Stoffelen, Ad

67

relatively high population density (much of it living inland) and small  

E-Print Network [OSTI]

relatively high population density (much of it living inland) and small rivers this is an important of filters such as activated carbon. The main problem is one of scale. A city such as Northampton, UK energy intensive drinking water purification technology in such a case would be an expensive undertaking

Darton, Richard

68

Argonne CNM Highlight: Superhydrophobicity on Silver Nanoplates  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Superhydrophobicity on Silver Nanoplates Superhydrophobicity on Silver Nanoplates Superhydrophobic silver nanoplates Representations of water droplets on a GaAs substrate covered with the Ag nanoplates; as featured on back cover of the journal issue Gallium arsenide wafers decorated with silver nanoplates result in composite surfaces of varying hydrophobocity. CNM researchers and collaborators at Clemson have accomplished this in part by coating the silver nanoplates with self-assembled monolayers of alkyl thiol molecules. By carefully controlling reaction conditions, the size, thickness, and surface roughness of the individual silver nanoplates are tuned to produce different topographic structures and roughness of the composite surfaces. This in turn influences the surface hydrophobicity. The composite surfaces

69

Solvent refined coal (SRC) process  

SciTech Connect (OSTI)

This report summarizes the progress of the Solvent Refined Coal (SRC) project by The Pittsburg and Midway Coal Mining Co. at the SRC Pilot Plant in Fort Lewis, Washington and the Gulf Science and Technology Company Process Development Unit (P-99) in Harmarville, Pennsylvania, for the Department of Energy during the month of October, 1980. The Fort Lewis Pilot Plant was shut down the entire month of October, 1980 for inspection and maintenance. PDU P-99 completed two runs during October investigating potential start-up modes for the Demonstration Plant.

Not Available

1980-12-01T23:59:59.000Z

70

Petroleum Refining Energy Use in Relation to Fuel Products Made  

E-Print Network [OSTI]

In recent years crude oils available to refiners have required more energy to refine and refiners have adjusted their processes to obtain better energy efficiency. In addition, the shift to lead-free gasoline has led to refining adjustments...

White, J. R.; Marshall, J. F.; Shoemaker, G. L.; Smith, R. B.

1983-01-01T23:59:59.000Z

71

Theoretical investigations of silver clusters and silver-ligand systems.  

SciTech Connect (OSTI)

Studies directed at understanding structural and electronic properties of silver clusters have been and remain the subject of an active theoretical [1-22] and experimental [23- 38] effort. One of the reasons is the (still) important role these systems play in the photographic process. Investigations of interactions of silver clusters with different atoms and molecules are motivated primarily by a possible utility of these clusters in catalytic processes. The important role of silver in the selective oxidation of ethylene into ethylene oxide, the feedstock for polyester production, is well-known [39]. Possible variations in chemical reactivity with the cluster size and understanding of the mechanisms of interactions with different ligands may lead to new and more efficient applications. Investigations of cluster-ligand systems also contribute a great deal to a better understanding of gas-surface interactions. Accordingly, theoretical studies of silver clusters and cluster-ligand systems [40-44] fall into two categories--those that use clusters as models for silver surfaces [40], and those that target clusters and cluster-ligand interactions as subjects in their own right [41-44]. The common goal of all these studies is to elucidate the nature of the interatomic interactions and bonding at the microscopic level and thereby arrive at a fundamental understanding and description of the various structural and electronic properties.

Jellinek, J.; Salian, U.; Srinivas, S.

1999-05-19T23:59:59.000Z

72

Chapter 2 Conventional refining processes  

Science Journals Connector (OSTI)

Publisher Summary This chapter discusses conventional refining processes. Refining is a very elaborate operation by which crude oil is transformed into a series of products such as, gases, fuels, solvents, lube oils, etc. Crude oil is a complex mixture of hydrocarbons (HC) of different C/H ratio and molecular structures. The different classes of HC molecules comprise paraffins, olefins, cycles, aromatics, resins, asphaltenes, and other poly-unsaturated molecules. In addition to hydrocarbons, crude oils also contain some other compounds composed by other atoms (heteroatoms) than carbon and hydrogen. Those moieties consist of sulfur (S), nitrogen (N), oxygen (O), and heavy metals. Crudes are usually classified in terms of their specific gravity as very light, light, median, heavy, and extra heavy. An empirical set of units for the crude gravity, defined by the American Petroleum Institute (API), is currently used in oil industry. Their appearance varies from transparent liquids to black solids, going from light to heavy. Light oils have lower specific gravity and larger API gravity, while for heavy oils vice versa. Their composition also changes, and so the concentration of those heteroatomic compounds typically increases from light to heavy. The crude oils are also categorized in terms of their chemical composition, as for instance, sour crude oils, those presenting high acidity, paraffinic, naphthenic, and aromatic.

2007-01-01T23:59:59.000Z

73

Representations of finite groups The Alperin-McKay refinement  

E-Print Network [OSTI]

Representations of finite groups The Alperin-McKay refinement The Isaacs-Navarro refinements The Mc-McKay refinement The Isaacs-Navarro refinements The basics Some history The McKay conjecture (for now) Let G groups The Alperin-McKay refinement The Isaacs-Navarro refinements The basics Some history The Mc

Cossey, James P.

74

Silver transport in CVD silicon carbide  

E-Print Network [OSTI]

Ion implantation and diffusion couple experiments were used to study silver transport through and release from CVD silicon carbide. Results of these experiments show that silver does not migrate via classical diffusion in ...

MacLean, Heather J. (Heather Jean), 1974-

2004-01-01T23:59:59.000Z

75

Refining Bio-Oil alongside Petroleum  

Office of Energy Efficiency and Renewable Energy (EERE)

W.R. Grace and Pacific Northwest National Laboratory are working to establish a bio-oil refining process that users existing petroleum refinery infrastructure.

76

Towards a flexible energy system A case study for Inland Norway  

Science Journals Connector (OSTI)

Abstract This paper analyze the benefits of the use of bioenergy, solar thermal and wind energy in a flexible energy system to increase the share of renewable sources (RES) in primary energy supply, reduce primary energy consumption (PEC) and ensure power supply security in Inland Norway, and Norway at large. Firstly, the Inland reference energy system was built and validated using the EnergyPLAN system analysis tool based on the year 2009. Two alternative systems (scenarios), mainly of bio-heat and heat pumps in individual and district heating systems were then constructed and compared with the reference system using EnergyPLAN. The quality of a given energy system can be best described by its PEC, RES, emission levels and socio-economic costs. The result shows that it is plausible to improve the quality of the Inland energy system by optimal resource assortment in the energy mix. Integrated use of bio-heat and heat pumps in individual and district heating systems, as a replacement for direct electric heaters would reduce PEC and socio-economic costs considerably more than intensive bio-heating deployment alone, thereby increasing total domestic green electricity generation. The ability to integrate wind power and its value in the Inland energy system is more reflected by reducing imports of electricity during peak demand periods in winter, as wind power availability in the region is significant as opposed to the low precipitation during these periods. In addition, increasing wind energy penetration helps to limit biomass consumption in a district heating system built on heat pumps and bio-heat boilers.

Dejene Assefa Hagos; Alemayehu Gebremedhin; Bjrn Zethraeus

2014-01-01T23:59:59.000Z

77

Heavy oils (natural and refined)  

SciTech Connect (OSTI)

This section of the Petroleum and Coal review again contains discussions on the analysis of asphalts, bitumens, tars, and pitches as well as heavy natural and refined oils. The characterization of these heavy (high-boiling) materials impacts the way they are produced, their effect on the processing environment, and their suitability for various end products. The analysis of these heavy materials is becoming increasingly important as crude oil stocks get heavier and larger quantities of high-boiling materials are processed to derive clean lower boiling products. This review covers articles found in the literature in the last two years. This review will cover new or improved analytical procedures and applications to new sources of heavy oils. This review will be subdivided into individual separation or analytical techniques. Combined analytical techniques (e.g., GC-FT-IR) will be included under the technique most emphasized in the article. The review is categorized further by chromatographic techniques, spectroscopic techniques, thermal techniques, and miscellaneous. 71 refs.

Lintelmann, K.A. [Marathon Oil Co., Littleton, CO (United States)

1995-06-15T23:59:59.000Z

78

Nuclear Spins of Silver-104 and Silver-106  

Science Journals Connector (OSTI)

The nuclear spins of four neutron-deficient isotopes of silver have been measured by atomic-beam methods. The results are: for 27-min Ag104, I=2; for 1.2-hr Ag104, I=5; for 24-min Ag106, I=1; and for 8.3-day Ag106, I=6. Of these, the result for 1.2-hr Ag104 has not been reported previously.

W. B. Ewbank; L. L. Marino; W. A. Nierenberg; H. A. Shugart; H. B. Silsbee

1959-08-01T23:59:59.000Z

79

Re-refining enters a new era  

SciTech Connect (OSTI)

The author describes the current state of affairs in the re-refining industry. Re-refiners are companies that recycle used lubricating oil into high quality base oils and other petroleum products. The re-refining industry has experienced it's own unique problems, as well as some of those occurring in the rest of the petroleum industry. For these reasons, other solutions are forthcoming, resulting in a new era. The future will see existing plants retrofitted, shut down plants being reopened, expanded and modernized and in the long term, new grass roots ''mega'' plants will be constructed in strategic marketing territories.

Booth, G.T. III

1987-01-01T23:59:59.000Z

80

Firing of pulverized solvent refined coal  

DOE Patents [OSTI]

A burner for the firing of pulverized solvent refined coal is constructed and operated such that the solvent refined coal can be fired successfully without any performance limitations and without the coking of the solvent refined coal on the burner components. The burner is provided with a tangential inlet of primary air and pulverized fuel, a vaned diffusion swirler for the mixture of primary air and fuel, a center water-cooled conical diffuser shielding the incoming fuel from the heat radiation from the flame and deflecting the primary air and fuel steam into the secondary air, and a watercooled annulus located between the primary air and secondary air flows.

Lennon, Dennis R. (Allentown, PA); Snedden, Richard B. (McKeesport, PA); Foster, Edward P. (Macungie, PA); Bellas, George T. (Library, PA)

1990-05-15T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Toxicogenomic Responses of Nanotoxicity in Daphnia magna Exposed to Silver Nitrate and Coated Silver Nanoparticles  

Science Journals Connector (OSTI)

Applications for silver nanomaterials in consumer products are rapidly expanding, creating an urgent need for toxicological examination of the exposure potential and ecological effects of silver nanoparticles (AgNPs). The integration of genomic techniques ...

Helen C. Poynton; James M. Lazorchak; Christopher A. Impellitteri; Bonnie J. Blalock; Kim Rogers; H. Joel Allen; Alexandre Loguinov; J. Lee Heckman; Shekar Govindasmawy

2012-04-30T23:59:59.000Z

83

Silver City Grant County Airport (SVC) Pavement Condition and Analysis  

E-Print Network [OSTI]

Silver City Grant County Airport (SVC) Pavement Condition and Analysis Submitted to: Jane M. Lucero ....................................1. Airport Conditions at Silver City Grant County Airport (SVC) 4 ..................................Figure 1. Geographic Location of Silver City Grant County Airport (SVC) 4 ......................Table 1

Cal, Mark P.

84

Silver Peak Innovative Exploration Project  

Broader source: Energy.gov [DOE]

DOE Geothermal Peer Review 2010 - Presentation. Project objectives: Reduce the high level of risk during the early stages of geothermal project development by conducting a multi-faceted and innovative exploration and drilling program at Silver Peak. Determine the combination of techniques that are most useful and cost-effective in identifying the geothermal resource through a detailed, post-project evaluation of the exploration and drilling program.

85

Valero Refining Company - NJ | Open Energy Information  

Open Energy Info (EERE)

Valero Refining Company - NJ Valero Refining Company - NJ Jump to: navigation, search Name Valero Refining Company - NJ Place New Jersey Utility Id 56325 Utility Location Yes Ownership R Operates Generating Plant Yes Activity Retail Marketing Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png No rate schedules available. Average Rates Industrial: $0.0652/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Valero_Refining_Company_-_NJ&oldid=411921" Categories: EIA Utility Companies and Aliases

86

Introducing Reference Semantics via Refinement Graeme Smith  

E-Print Network [OSTI]

Introducing Reference Semantics via Refinement Graeme Smith Software Verification Research Centre, University of Queensland, Australia smith@svrc.uq.edu.au Abstract. Two types of semantics have been given

Smith, Graeme

87

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Gallons per Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1997...

88

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Gallons per Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1996...

89

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Gallons per Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1995...

90

Diameter-Refined Metallic Carbon Nanotubes as Optically Tunable...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Diameter-Refined Metallic Carbon Nanotubes as Optically Tunable Transparent Conductors Home > Research > ANSER Research Highlights > Diameter-Refined Metallic Carbon Nanotubes as...

91

Genealogy of major U.S. refiners  

U.S. Energy Information Administration (EIA) Indexed Site

of major U.S. refiners of major U.S. refiners 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Amoco SOHIO BP ARCO Mapco Williams Clark Refining 1/89 12/98 4/00 3/98 Orion Diamond Shamrock Ultramar k 12/96 7/03 Ultramar Diamond Shamrock (UDS) Total North America UDS 9/97 Valero Salomon (Basis) Valero Williams BP BP b BP-Husky Refining LLC (jv) Husky Huntway 5/97 6/01 9/05 Valero Premcor g Valero Valero Valero 12/01 7/94 e 12/98 f Carlyle Group y Coastal 3/03 d 12/88 a 6/01 o Sun Company Sunoco v 7/07 i 4/08 c 5/04 h Pacific Refining (jv) 12/88 r El Paso 1/04 w 10/98 m 6/00 n 9/89 t 8/94 u See notes, footnotes, and source notes below. PBF Energy 6/10 p 12/10 q 3/11 x 10/11 j 9/00 l 1/01 s Genealogy of major U.S. refiners (continued) 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013

92

Composition-Controlled Synthesis of Bimetallic Gold-Silver Nanoparticl...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Composition-Controlled Synthesis of Bimetallic Gold-Silver Nanoparticles. Composition-Controlled Synthesis of Bimetallic Gold-Silver Nanoparticles. Abstract: This paper reports...

93

Molecular Dynamics Study of the Electrical Double Layer at Silver...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrical Double Layer at Silver Chloride Electrolyte Interfaces. Molecular Dynamics Study of the Electrical Double Layer at Silver Chloride Electrolyte Interfaces. Abstract:...

94

Refining intensity, energy consumption, and pulp quality in two-stage chip refining  

SciTech Connect (OSTI)

This paper reports on thermomechanical pulps produced in two pilot plant installations. Both installations were conventional two-stage systems in which the first stage was pressurized and the second was atmospheric. At a given specific energy, pulp quality was improved. Alternatively, for a given pulp quality, the energy consumption was reduced when refining in the first stage was carried out at a high refining intensity. High refining intensity was reached by operating the first stage either at a high rotational speed or low consistency. There were indications that these benefits could be enhanced if the second stage were operated at a low refining intensity.

Miles, K.B.; May, W.D.; Karnis, A. (Pulp and Paper Research Inst. of Canada, 570 St. John's Boulevard, Pointe Claire, Quebec H9R 3J9 (CA))

1991-03-01T23:59:59.000Z

95

Green Petroleum Refining -Mathematical Models for Optimizing Petroleum Refining Under Emission Constraints  

E-Print Network [OSTI]

Green Petroleum Refining - Mathematical Models for Optimizing Petroleum Refining Under Emission understand that my thesis may be made electronically available to the public. #12;iii Abstract Petroleum and treating options for petroleum refinery waste streams. The performance of the developed model

Anderson, Charles H.

96

Hydrogen Piping Experience in Chevron Refining  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Piping Piping Experience in Chevron Refining Ned Niccolls Materials Engineer Chevron Energy Technology Company Hydrogen Pipeline Working Group Workshop August 30-31, 2005 Outline 2 Overall perspectives from long term use of hydrogen piping in refining. Piping specifications and practices. The (few) problem areas. Related industry work: American Petroleum Institute corrosion and materials work on high temperature hydrogen attack. Overall Perspectives 3 Few problems with hydrogen piping operating at ambient to at least 800F and pressures up to at least 3000psia as long as we stay within well- defined limits H2S contamination presents many more problems, beyond the scope of this talk We will note a couple of specific vulnerabilities Refining tracks materials performance in

97

Hydrotreating operations discussed at refining meeting  

SciTech Connect (OSTI)

At the most recent National Petroleum Refiners Association question and answer session on refining and petrochemical technology, refiners and a panel of experts exchanged experiences on hydrotreater operations. Topics addressed included reactor pressurization, scale basket removal, and the use of antifoulants in effluent exchangers. This article presents comments from the panelists on the following questions. (1) What is the industry practice used to speed up the pressurization of 2.25 Cr/1 Mo reactors during start-up? Is there any relationship between reactor skin temperature and pressure used? (2) Has anyone removed scale baskets from a hydrotreating reactor and compared operations before and after? If so, were there any noticeable differences? Why? (3) What is the industry experience with the use of antifoulants for hydrocracking or hydrotreating reactor effluent exchangers?

NONE

1995-06-12T23:59:59.000Z

98

Norwegian Silicon Refining AS | Open Energy Information  

Open Energy Info (EERE)

Refining AS Refining AS Jump to: navigation, search Name Norwegian Silicon Refining AS Place Oslo, Norway Zip 214 Product Oslo-based company with an upgraded metallurgical silicon (UMG) production process called the Stubergh method. Coordinates 59.91228°, 10.74998° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":59.91228,"lon":10.74998,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

99

1995 Reformulated Gasoline Market Affected Refiners Differently  

Gasoline and Diesel Fuel Update (EIA)

5 Reformulated Gasoline Market Affected 5 Reformulated Gasoline Market Affected Refiners Differently by John Zyren, Charles Dale and Charles Riner Introduction The United States has completed its first summer driving season using reformulated gasoline (RFG). Motorists noticed price increases at the retail level, resulting from the increased cost to produce and deliver the product, as well as from the tight sup- ply/demand balance during the summer. This arti- cle focuses on the costs of producing RFG as experienced by different types of refiners and on how these refiners fared this past summer, given the prices for RFG at the refinery gate. RFG Regulatory Requirements The use of RFG is a result of the Clean Air Act Amendments of 1990 (CAAA). The CAAA cover a wide range of programs aimed at improving air qual-

100

School of Mathematical and Physical Sciences, University of Reading, Silver Renewal, November 2013. Athena SWAN Silver Department award renewal  

E-Print Network [OSTI]

School of Mathematical and Physical Sciences, University of Reading, Silver Renewal, November 2013. 1 Athena SWAN Silver Department award renewal application Name of institution: University of Reading of university Bronze award: renewed November 2011 Level of award applied for: Silver renewal Athena SWAN Silver

Mottram, Nigel

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Refinement of the crystal structure of hydroboracite  

Science Journals Connector (OSTI)

...1978) ABSTRACT The crystal structure of caysichite was determined and refined to R=0.06, using 959 independentreflec-iions; the space group is CcmZy with a 13,27(L), b 13.91(1),c 9.73G)4,. The crystal chemical formula is Ye(CagREJ...

C. Sabelli; A. Stoppioni

102

Focus on Venezuelan heavy crude: refining margins  

SciTech Connect (OSTI)

Of six crudes refined in the US Gulf Coast, heavy Venezuelan crude Lagunillas (15/sup 0/ API) provides the best margin per barrel. Data for end of December 1983 and the first three weeks of January show that margins on all crudes are on the rise in this market, due to a turnaround in product prices. The lighter crudes are showing the greatest increase in Gross Product Worth. This is having a modest shrinking effect on the margin differential between light and heavy crudes in this market. The domestic crude West Texas Intermediate, at 40/sup 0/ API, provides the highest GPW in this crude slate sample, over US $31 per barrel, compared to GPW of under US $28 per barrel for Lagunillas. Still, as Lagunillas cost about US $8 less than does WTI, refiners with sufficient residue conversion capacity can be earning about US $3.50 more in margin per barrel than they can with WTI. Although few refiners would be using a 15/sup 0/ API crude exclusively for any length of time, heavier oil's inclusion in modern refiners' diets is enhancing their competitive position more than any other single factor. This issue of Energy Detente presents the fuel price/tax series and industrial fuel prices for January 1984 for countries of the Western Hemisphere.

Not Available

1984-01-25T23:59:59.000Z

103

Transforming and Refining Abstract Constraint Specifications  

E-Print Network [OSTI]

Transforming and Refining Abstract Constraint Specifications Alan M. Frisch1 , Brahim Hnich2 , Ian choose model transformations to reduce greatly the amount of effort that is required to solve a problem by systematic search. It is a consid- erable challenge to automate such transformations. A problem may be viewed

Walsh, Toby

104

Contemporary Anthropogenic Silver Cycle:? A Multilevel Analysis  

Science Journals Connector (OSTI)

In 1991, Baccini and Brunner stated that, with urbanization, the anthroposphere assumes high energy and material fluxes (16). ... Table 2.? Silver Fabrication Demand by End Usea ... In country-level cycles, the waste generation of silver from film and photograph production ranges from 1 to 4 g Ag/(capitayear) using an assumed direct relationship between photographic development and GDP per capita in constant prices, up to 10?000 USD per capita. ...

Jeremiah Johnson; Julie Jirikowic; Marlen Bertram; D. van Beers; R. B. Gordon; Kathryn Henderson; R. J. Klee; Ted Lanzano; R. Lifset; Lucia Oetjen; T. E. Graedel

2005-05-07T23:59:59.000Z

105

Using supercritical fluids to refine hydrocarbons  

DOE Patents [OSTI]

This is a method to reactively refine hydrocarbons, such as heavy oils with API gravities of less than 20.degree. and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure using a selected fluid at supercritical conditions. The reaction portion of the method delivers lighter weight, more volatile hydrocarbons to an attached contacting device that operates in mixed subcritical or supercritical modes. This separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques. This method produces valuable products with fewer processing steps, lower costs, increased worker safety due to less processing and handling, allow greater opportunity for new oil field development and subsequent positive economic impact, reduce related carbon dioxide, and wastes typical with conventional refineries.

Yarbro, Stephen Lee

2014-11-25T23:59:59.000Z

106

Improve corrosion control in refining processes  

SciTech Connect (OSTI)

New guidelines show how to control corrosion and environmental cracking of process equipment when processing feedstocks containing sulfur and/or naphthenic acids. To be cost competitive refiners must be able to process crudes of opportunity. These feedstocks when processed under high temperatures and pressures and alkaline conditions can cause brittle cracks and blisters in susceptible steel-fabricated equipment. Even with advances in steel metallurgy, wet H{sub 2}S cracking continues to be a problem. New research data shows that process conditions such as temperature, pH and flowrate are key factors in the corrosion process. Before selecting equipment material, operators must understand the corrosion mechanisms present within process conditions. Several case histories investigate the corrosion reactions found when refining naphthenic crudes and operating amine gas-sweetening systems. These examples show how to use process controls, inhibitors and/or metallurgy to control corrosion and environmental cracking, to improve material selection and to extend equipment service life.

Kane, R.D.; Cayard, M.S. [CLI International, Houston, TX (United States)

1995-11-01T23:59:59.000Z

107

Parabolic refined invariants and Macdonald polynomials  

E-Print Network [OSTI]

A string theoretic derivation is given for the conjecture of Hausel, Letellier, and Rodriguez-Villegas on the cohomology of character varieties with marked points. Their formula is identified with a refined BPS expansion in the stable pair theory of a local root stack, generalizing previous work of the first two authors in collaboration with G. Pan. Haiman's geometric construction for Macdonald polynomials is shown to emerge naturally in this context via geometric engineering. In particular this yields a new conjectural relation between Macdonald polynomials and refined local orbifold curve counting invariants. The string theoretic approach also leads to a new spectral cover construction for parabolic Higgs bundles in terms of holomorphic symplectic orbifolds.

Chuang, Wu-yen; Donagi, Ron; Pantev, Tony

2013-01-01T23:59:59.000Z

108

Genealogy of major U.S. refiners - Energy Information Administration  

U.S. Energy Information Administration (EIA) Indexed Site

See full Genealogy of Major U.S. Refiners Previous Release Genealogy of Major U.S. Refiners Genealogy of Major U.S. Refiners Release date: September 18, 2013 figre 1. World energy consumption, 1990-2040. The structure of the U.S. petroleum refining industry has changed substantially over the past several years. In the diagram the companies shown on the right side are presently active in U.S. refining. The transactions over the past 25 years that created these companies also are shown. The transactions included here may be as little as a single refinery, or as much as all the refining assets of the parties to the transaction. Transactions that include less than all refining assets are indicated by vertical dotted lines while vertical solid lines indicate that all refining assets are included. Additionally,

109

Grain Refinement of Permanent Mold Cast Copper Base Alloys  

SciTech Connect (OSTI)

Grain refinement is a well established process for many cast and wrought alloys. The mechanical properties of various alloys could be enhanced by reducing the grain size. Refinement is also known to improve casting characteristics such as fluidity and hot tearing. Grain refinement of copper-base alloys is not widely used, especially in sand casting process. However, in permanent mold casting of copper alloys it is now common to use grain refinement to counteract the problem of severe hot tearing which also improves the pressure tightness of plumbing components. The mechanism of grain refinement in copper-base alloys is not well understood. The issues to be studied include the effect of minor alloy additions on the microstructure, their interaction with the grain refiner, effect of cooling rate, and loss of grain refinement (fading). In this investigation, efforts were made to explore and understand grain refinement of copper alloys, especially in permanent mold casting conditions.

M.Sadayappan; J.P.Thomson; M.Elboujdaini; G.Ping Gu; M. Sahoo

2005-04-01T23:59:59.000Z

110

Hardware/Software Co-Design via Specification Refinement  

E-Print Network [OSTI]

. The Rosetta refinement capability extends this by allowing a system's functional behavior and its implementation details to be described separately. The Rosetta Refinement Tool combines the functional behavior and the implementation details to form a system...

Peck, Wesley Graham

2011-12-31T23:59:59.000Z

111

5.841 Crystal Structure Refinement, Fall 2006  

E-Print Network [OSTI]

This course in crystal structure refinement examines the practical aspects of crystal structure determination from data collection strategies to data reduction and basic and advanced refinement problems of organic and ...

Mueller, Peter

112

5.067 Crystal Structure Refinement, Fall 2007  

E-Print Network [OSTI]

This course in crystal structure refinement examines the practical aspects of crystal structure determination from data collection strategies to data reduction and basic and advanced refinement problems of organic and ...

Mueller, Peter

113

Verification of microarchitectural refinements in rule-based systems  

E-Print Network [OSTI]

Microarchitectural refinements are often required to meet performance, area, or timing constraints when designing complex digital systems. While refinements are often straightforward to implement, it is difficult to formally ...

Dave, Nirav H.

114

ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry: Chapter 7: Gold & Silver  

Broader source: Energy.gov (indexed) [DOE]

Department of Energy Department of Energy 7 Gold & Silver Gold has played a prominent role in world economic and political events. Most of the gold mined over the past 6000 years exists mainly in the form of refined gold held by governments as monetary reserve assets or by individuals in the form of jewelry, bullion coins, or small bars held as insurance against currency devaluation. In modern usage, gold is also used worldwide in numerous electronic, industrial, and dental applications, but more than three-fourths of the world's total annual demand goes toward the fabrication of jewelry and the minting of coins. Silver has three primary applications: industrial and decorative uses, photography, and jewelry and silverware. Together, these categories represent more than 95 percent of

115

Error estimation and adaptive mesh refinement for aerodynamic flows  

E-Print Network [OSTI]

Error estimation and adaptive mesh refinement for aerodynamic flows Ralf Hartmann, Joachim Held-oriented mesh refinement for single and multiple aerodynamic force coefficients as well as residual-based mesh refinement applied to various three-dimensional lam- inar and turbulent aerodynamic test cases defined

Hartmann, Ralf

116

Charles R. Goldman, Michio Kumagai, Richard D. Robarts: Climatic change and global warming of inland waters. Impacts and mitigation for ecosystems and societies  

Science Journals Connector (OSTI)

This book is about changes that have occurred and are likely to happen in surface inland waters, both fresh and saline, as warming proceeds. The book is organised in three ... chapters describe and analyse the ef...

Luc Hens

2014-08-01T23:59:59.000Z

117

Nuclear power plants and biocultural renaissance: A case study of Iwaishima Island in the Seto Inland Sea of Japan  

Science Journals Connector (OSTI)

For three decades, Iwaishima Islanders have rejected the proposal for a nuclear power plant to be built 3.5km from their home. Located in the Suo-nada Inland Sea, which has miraculously escaped contamination, dredging of sand, or reclamation that damaged the Seto Inland Sea after WWII, the islanders maintain their livelihood by marketing fresh fish and organic produce. Based on studies on the biodiversity and recent interviews, some underlying reasons for their unyielding struggle have come to light: (1) some worked in Fukushima Daiichi NPP, and knew its damaging effects on human health and the bioregion; (2) islanders exchange goods and services, with minimal dependence on cash; and (3) they have revived the 10-century-old Kanmai (divine dance) festival held every 4years.

Yuji Ankei

2012-01-01T23:59:59.000Z

118

Argonne CNM News: Charge Separation in Silver Clusters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Charge Separation in Silver Clusters Charge Separation in Silver Clusters silver clusters Artist's rendering of silver clusters capped with organic ligand molecules. transient kinetics of silver clusters Transient kinetics showing charge recombination in ligand-stabilized silver clusters for different surrounding solvents (water-methanol mixture, acetone, and dichloromethane). Both charge separation and recombination events are faster in more polar solvents. Center for Nanoscale Materials (CNM) users from the Ecole Polytechnique Federale de Lausanne in Switzerland, working with the CNM Nanophotonics Group, have demonstrated the existence of long-lived charge-separated states in silver clusters. The clusters, synthesized chemically in solution, consist of exactly 44 silver atoms and are stabilized by exactly

119

Sintered silver joints via controlled topography of electronic packaging subcomponents  

SciTech Connect (OSTI)

Disclosed are sintered silver bonded electronic package subcomponents and methods for making the same. Embodiments of the sintered silver bonded EPSs include topography modification of one or more metal surfaces of semiconductor devices bonded together by the sintered silver joint. The sintered silver bonded EPSs include a first semiconductor device having a first metal surface, the first metal surface having a modified topography that has been chemically etched, grit blasted, uniaxial ground and/or grid sliced connected to a second semiconductor device which may also include a first metal surface with a modified topography, a silver plating layer on the first metal surface of the first semiconductor device and a silver plating layer on the first metal surface of the second semiconductor device and a sintered silver joint between the silver plating layers of the first and second semiconductor devices which bonds the first semiconductor device to the second semiconductor device.

Wereszczak, Andrew A.

2014-09-02T23:59:59.000Z

120

Silver-catalyzed synthesis of amides from amines and aldehydes  

DOE Patents [OSTI]

The invention provides a method for producing amides via the reaction of aldehydes and amines with oxygen adsorbed on a metallic silver or silver alloy catalyst. An exemplary reaction is shown in Scheme 1: (I), (II), (III). ##STR00001##

Madix, Robert J; Zhou, Ling; Xu, Bingjun; Friend, Cynthia M; Freyschlag, Cassandra G

2014-11-18T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Health-hazard evaluation report HETA 82-309-1630, Inland Steel, East Chicago, Indiana  

SciTech Connect (OSTI)

Environmental and breathing-zone samples were analyzed for polynuclear aromatic hydrocarbons (PAHs) and coal-tar-pitch volatiles at the Inland Steel Company, East Chicago, Indiana in November, 1982 and September, 1984. The evaluation was requested because of concern about employee exposures during maintenance of the coke battery precipitator at the number 2 facility. Four former employees were interviewed. The cyclohexane soluble fraction of coal-tar-pitch volatiles ranged from 0.232 to 0.668 mg/m/sup 3/. The OSHA standard is 0.15mg/m/sup 3/. Naphthalene concentrations up to 0.107mg/m/sup 3/ were detected. The OSHA standard for naphthalene is 50mg/m/sup 3/. Other PAHs detected included phenanthrene, fluorene and acenaphthene. The employees reported experiencing local skin, eye, ear, nose, and throat irritation while working on the coke battery precipitator in the past. Personal protective measures such as wearing safety boots, barrier creams on exposed skin surfaces, and showering and changing clothes before leaving the facility were implemented. The authors conclude that a potential health hazard from PAHs and coal-tar-pitch volatiles is being adequately addressed by the facility. Recommendations include continuing the present personal protective measures and providing emergency rescue training.

Almaguer, D.; Orris, P.

1985-10-01T23:59:59.000Z

122

(Data in metric tons of silver content unless otherwise noted)  

E-Print Network [OSTI]

60 to 90 tons of silver that is reclaimed and recycled annually from photographic wastewater. Import in photographic wastewater may be recycled. Silver demand for use in coins, electronics, industrial applications Recycling: In 2010, approximately 1,600 tons of silver was recovered from old and new scrap. This includes

123

Silver Peak Geothermal Project | Open Energy Information  

Open Energy Info (EERE)

Silver Peak Geothermal Project Silver Peak Geothermal Project Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Development Project: Silver Peak Geothermal Project Project Location Information Coordinates 37.755°, -117.63472222222° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.755,"lon":-117.63472222222,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

124

Silver Peak Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Silver Peak Geothermal Area Silver Peak Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Silver Peak Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (5) 9 Exploration Activities (26) 10 References Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"TERRAIN","zoom":6,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"300px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.746167220142,"lon":-117.60267734528,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

125

In-Situ Silver Acetylide Silver Nitrate Explosive Deposition Measurements Using X-Ray Fluorescence.  

SciTech Connect (OSTI)

The Light Initiated High Explosive facility utilized a spray deposited coating of silver acetylide - silver nitrate explosive to impart a mechanical shock into targets of interest. A diagnostic was required to measure the explosive deposition in - situ. An X - ray fluorescence spectrometer was deployed at the facility. A measurement methodology was developed to measure the explosive quantity with sufficient accuracy. Through the use of a tin reference material under the silver based explosive, a field calibration relationship has been developed with a standard deviation of 3.2 % . The effect of the inserted tin material into the experiment configuration has been explored.

Covert, Timothy T.

2014-09-01T23:59:59.000Z

126

Renewable Energy Project Refinement Webinar | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Renewable Energy Project Refinement Webinar Renewable Energy Project Refinement Webinar Renewable Energy Project Refinement Webinar May 28, 2014 11:00AM MDT Attendees will become familiar with the three components of project refinement: project financing strategies, off-taker agreements, and vendor selection. Project refinement obstacles, particularly financing, can deter the deployment of renewable energy projects on tribal lands. Attendees will learn about the financial resources and ownership options available-including venture capital and innovative financing-that can help Tribes overcome longstanding barriers and attract higher levels of private investment. Finally, attendees will learn how project refinement can accelerate renewable energy development and, with it, tribal economic and community development. There is no cost to attend the webinar, but

127

A CSP Account of Event-B Refinement  

E-Print Network [OSTI]

Event-B provides a flexible framework for stepwise system development via refinement. The framework supports steps for (a) refining events (one-by-one), (b) splitting events (one-by-many), and (c) introducing new events. In each of the steps events can moreover possibly be anticipated or convergent. All such steps are accompanied with precise proof obligations. Still, it remains unclear what the exact relationship - in terms of a behaviour-oriented semantics - between an Event-B machine and its refinement is. In this paper, we give a CSP account of Event-B refinement, with a treatment for the first time of splitting events and of anticipated events. To this end, we define a CSP semantics for Event-B and show how the different forms of Event-B refinement can be captured as CSP refinement.

Schneider, Steve; Wehrheim, Heike; 10.4204/EPTCS.55.9

2011-01-01T23:59:59.000Z

128

Refinement of synchroton spectral tip calculations  

Science Journals Connector (OSTI)

Refinements in the computing techniques were performed in the calculation of transition rates to the ground and first excited states in magnetic bremsstrahlung via the use of exact matrix elements. The above calculations were carried out to double precision on a UNIVAC 1108 computer as was the calculation of transition rates to the second excited state. Empirical formulas are given for the transition rates from arbitrary upper states to the ground state, first excited state, and the second excited state for arbitrary magnetic field strengths. In addition the relative probabilities of transitions from level three to the remaining three lower levels is investigated in detail in the vicinity of the quantum-mechanical critical field, and the spectral tip structure for an electron in state n?1 is viewed in this high-field regime.

D. White

1978-09-15T23:59:59.000Z

129

Silver Peak Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Silver Peak Geothermal Area Silver Peak Geothermal Area (Redirected from Silver Peak Area) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Silver Peak Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (5) 9 Exploration Activities (26) 10 References Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"TERRAIN","zoom":6,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"300px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.746167220142,"lon":-117.60267734528,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

130

Silver Star Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Silver Star Wind Farm Silver Star Wind Farm Jump to: navigation, search Name Silver Star Wind Farm Facility Silver Star Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner BP Alternative Energy/Clipper Developer BP Alternative Energy/Clipper Energy Purchaser Market Location Eastland and Erath Counties TX Coordinates 32.332058°, -98.466783° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.332058,"lon":-98.466783,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

131

Renewable Energy Financial Instruments Guidance Tool (REFINe) | Open Energy  

Open Energy Info (EERE)

Renewable Energy Financial Instruments Guidance Tool (REFINe) Renewable Energy Financial Instruments Guidance Tool (REFINe) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Financial Instruments Guidance Tool (REFINe) Focus Area: Renewable Energy Topics: Policy Impacts Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/0,,contentMDK:2298 Equivalent URI: cleanenergysolutions.org/content/renewable-energy-financial-instrument Language: English Policies: "Deployment Programs,Financial Incentives" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Training & Education Renewable Energy Financial Instruments Guidance Tool (REFINe) aims to assist policy in identifying appropriate financial instruments to scale-up

132

New Process for Grain Refinement of Aluminum. Final Report  

SciTech Connect (OSTI)

A new method of grain refining aluminum involving in-situ formation of boride nuclei in molten aluminum just prior to casting has been developed in the subject DOE program over the last thirty months by a team consisting of JDC, Inc., Alcoa Technical Center, GRAS, Inc., Touchstone Labs, and GKS Engineering Services. The Manufacturing process to make boron trichloride for grain refining is much simpler than preparing conventional grain refiners, with attendant environmental, capital, and energy savings. The manufacture of boride grain refining nuclei using the fy-Gem process avoids clusters, salt and oxide inclusions that cause quality problems in aluminum today.

Dr. Joseph A. Megy

2000-09-22T23:59:59.000Z

133

Petroleum Products Table 43. Refiner Motor Gasoline Volumes...  

Gasoline and Diesel Fuel Update (EIA)

by Grade, Sales Type, PAD District, and State 262 Energy Information Administration Petroleum Marketing Annual 1996 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type,...

134

ITP Petroleum Refining: Technology Roadmap for the Petroleum...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Technology Roadmap for the Petroleum Industry ITP Petroleum Refining: Technology Roadmap for the Petroleum Industry petroleumroadmap.pdf More Documents & Publications ITP Aluminum:...

135

Petroleum Products Table 43. Refiner Motor Gasoline Volumes...  

Gasoline and Diesel Fuel Update (EIA)

by Grade, Sales Type, PAD District, and State 262 Energy Information Administration Petroleum Marketing Annual 1997 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type,...

136

,"U.S. Total Refiner Petroleum Product Prices"  

U.S. Energy Information Administration (EIA) Indexed Site

NUSDPG","EMAEPPRLPWGNUSDPG","EMAEPPRHPWGNUSDPG" "Date","U.S. Total Gasoline WholesaleResale Price by Refiners (Dollars per Gallon)","U.S. Aviation Gasoline Wholesale...

137

Table 19. U.S. Refiner Residual Fuel Oil Prices  

U.S. Energy Information Administration (EIA) Indexed Site

Prices," source for backcast estimates prior to January 1983. 19. U.S. Refiner Residual Fuel Oil Prices 36 Energy Information Administration Petroleum Marketing Annual 1996...

138

Table 19. U.S. Refiner Residual Fuel Oil Prices  

U.S. Energy Information Administration (EIA) Indexed Site

Prices," source for backcast estimates prior to January 1983. 19. U.S. Refiner Residual Fuel Oil Prices 36 Energy Information Administration Petroleum Marketing Annual 1997...

139

Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...  

Gasoline and Diesel Fuel Update (EIA)

Information AdministrationPetroleum Marketing Annual 1998 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons per...

140

Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Information Administration Petroleum Marketing Annual 1995 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon Excluding...

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Information AdministrationPetroleum Marketing Annual 1999 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons per...

142

Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

- - - - W W - - - - - - See footnotes at end of table. 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State 292 Energy Information...

143

Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Information AdministrationPetroleum Marketing Annual 1999 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon Excluding...

144

Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...  

Gasoline and Diesel Fuel Update (EIA)

Information Administration Petroleum Marketing Annual 1995 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons per...

145

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Information AdministrationPetroleum Marketing Annual 1998 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per Day) -...

146

Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

Information AdministrationPetroleum Marketing Annual 1998 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon Excluding...

147

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Information Administration Petroleum Marketing Annual 1995 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per Day) -...

148

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

Information AdministrationPetroleum Marketing Annual 1999 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per Day) -...

149

11 California Petroleum Supply, Transportation, Refining and Marketing Trends  

E-Print Network [OSTI]

11 California Petroleum Supply, Transportation, Refining and Marketing Trends Chapter 2 CALIFORNIA PETROLEUM SUPPLY, TRANSPORTATION, REFINING AND MARKETING TRENDS INTRODUCTION California is an integral part of the world oil market as a world-scale petroleum consumer. Historically, about 50 percent of this petroleum

150

fCourse: Learn to Swim Level 5: Stroke Refinement  

E-Print Network [OSTI]

fCourse: Learn to Swim Level 5: Stroke Refinement Purpose To further learn how to coordinate and refine strokes Prerequisites Valid American Red Cross Learn-to-Swim Level 4: Fundamental Aquatic Skills Shallow-angle dive from the side then glide and begin a front stroke Tuck and pike surface dives, submerge

Hemmers, Oliver

151

On Adaptive Mesh Refinement for Atmospheric Pollution Models  

E-Print Network [OSTI]

On Adaptive Mesh Refinement for Atmospheric Pollution Models Emil M. Constantinescu and Adrian Springer-Verlag Berlin Heidelberg 2005 #12;On Adaptive Mesh Refinement for Atmospheric Pollution Models 799 res- olution system for modeling regional air pollution based on the chemical transport model STEM

Sandu, Adrian

152

Refining Landscape Change Models through Outlier Analysis in the  

E-Print Network [OSTI]

Refining Landscape Change Models through Outlier Analysis in the Muskegon Watershed of Michigan significantly to the state economy, accounting for nearly 20% of its economic output (Michigan Land Use, 1965; Lee, 1973; Wegener, 1994), and model refinement/advancement, in large part due to advances

Walker, Robert T.

153

Refined BPS state counting from Nekrasov's formula and Macdonald functions  

E-Print Network [OSTI]

It has been argued that the Nekrasov's partition function gives the generating function of refined BPS state counting in the compactification of M theory on local Calabi-Yau spaces. We show that a refined version of the topological vertex we proposed before (hep-th/0502061) is a building block of the Nekrasov's partition function with two equivariant parameters. Compared with another refined topological vertex by Iqbal-Kozcaz-Vafa (hep-th/0701156), our refined vertex is expressed entirely in terms of the specialization of the Macdonald symmetric functions which is related to the equivariant character of the Hilbert scheme of points on C^2. We provide diagrammatic rules for computing the partition function from the web diagrams appearing in geometric engineering of Yang-Mills theory with eight supercharges. Our refined vertex has a simple transformation law under the flop operation of the diagram, which suggests that homological invariants of the Hopf link are related to the Macdonald functions.

Hidetoshi Awata; Hiroaki Kanno

2009-03-10T23:59:59.000Z

154

The response of mechanical and chemical pulps to refining  

SciTech Connect (OSTI)

This paper reports on theoretical equations describing the flow of pulp in refiners were used to analyze the experimental results obtained in a series of pilot plant trials. Western red cedar and loblolly pine wood chips were refined in 1-3 stages at rotational speeds of 1200 and 1800 rpm to produce thermomechanical pulps (TMP). Also, sulfate semibleached and low-yield sulfite pulps were refined at low (5%), medium (12%), and high (25%) consistency. The results indicate that the number of refining stages did not affect mechanical pulp quality. At a given specific energy, increasing the rotational speed increased the specific energy per impact and decreased the total number of impacts, resulting in a faster rate of fines generation for mechanical pulps. For chemical pulps higher pulp consistency produced gentler refining and yielded a higher rate of freeness decrease.

Miles, K.B.; Karnis, A. (Pulp and Paper Research Inst. of Canada, 570 St. John's Rd., Pointe Claire, Quebec H9R 3J9 (CA))

1991-01-01T23:59:59.000Z

155

Steel refining with an electrochemical cell  

DOE Patents [OSTI]

Apparatus for processing a metallic fluid containing iron oxide, container for a molten metal including an electrically conductive refractory disposed for contact with the molten metal which contains iron oxide, an electrolyte in the form of a basic slag on top of the molten metal, an electrode in the container in contact with the slag electrically separated from the refractory, and means for establishing a voltage across the refractory and the electrode to reduce iron oxide to iron at the surface of the refractory in contact with the iron oxide containing fluid. A process is disclosed for refining an iron product containing not more than about 10% by weight oxygen and not more than about 10% by weight sulfur, comprising providing an electrolyte of a slag containing one or more of calcium oxide, magnesium oxide, silica or alumina, providing a cathode of the iron product in contact with the electrolyte, providing an anode in contact with the electrolyte electrically separated from the cathode, and operating an electrochemical cell formed by the anode, the cathode and the electrolyte to separate oxygen or sulfur present in the iron product therefrom.

Blander, Milton (Palos Park, IL); Cook, Glenn M. (Naperville, IL)

1988-01-01T23:59:59.000Z

156

Silver State Geothermal Project | Open Energy Information  

Open Energy Info (EERE)

Silver State Geothermal Project Silver State Geothermal Project Project Location Information Coordinates 38.786666666667°, -117.17916666667° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.786666666667,"lon":-117.17916666667,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

157

Silver Sage Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Sage Wind Farm Sage Wind Farm Jump to: navigation, search Name Silver Sage Wind Farm Facility Silver Sage Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Duke Energy Carolinas LLC Developer Duke Energy Carolinas LLC Energy Purchaser Cheyenne Light Fuel & Power Location West of Cheyenne WY Coordinates 41.141259°, -104.983061° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.141259,"lon":-104.983061,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

158

Life Cycle Carbon Footprint of Re-Refined versus Base Oil That Is Not Re-Refined  

Science Journals Connector (OSTI)

The study showed that global warming potential was lower for all five re-refining techniques considered compared to the production of base oil in standard refineries. ... Safety-Kleen, the largest used oil re-refiner in North America, collects and re-refines used oil into approximately 100,000,000 gallons of base oil per year. ... Figure 4 presents the re-refined carbon footprint-based oil GHG emissions for re-refinery system yields of 50% (equivalent to two gallons of use over a gallon of base oils lifetime; 50% burden from virgin base oil input) to 100% (infinite re-refining; no burden from virgin base oil input). ...

Lisa N. Grice; Carolyn E. Nobel; Lin Longshore; Ramsay Huntley; Ashley L. DeVierno

2013-10-25T23:59:59.000Z

159

Changing System Interfaces Consistently: a New Refinement Strategy for CSP B  

E-Print Network [OSTI]

Changing System Interfaces Consistently: a New Refinement Strategy for CSP B Steve Schneider refinement in the context of CSP B. Our motivation to include this notion of refinement within the CSP B to change the events of a CSP process and the B machines when refining a system. Notions of refinement based

Doran, Simon J.

160

Plasma parameters in electrospark deposition of silver coatings  

Science Journals Connector (OSTI)

Spectroscopic measurements and mathematical simulations are conducted to study the composition and parameters of spark discharge in depositing coatings with silver electrodes using an litron-22 generator. The...

V. D. Kurochkin; L. P. Kravchenko; L. O. Kryachko

2008-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

DNA Origami Directed Self-Assembly of Discrete Silver Nanoparticle...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Self-Assembly of Discrete Silver Nanoparticle Architectures Source: Angewandte Chemie International Edition Year: 2010 Volume: 49 Pages: 2700-2704 ABSTRACT: DNA origami...

162

Table 24. Refining Industry Energy Consumption  

Gasoline and Diesel Fuel Update (EIA)

- Corrections to Tables 24 to 32 - Corrections to Tables 24 to 32 Table 24. Refining Industry Energy Consumption 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2002- 2025 Carbon Dioxide Emissions 4/ (million metric tons) 190.4 185.7 188.0 191.3 207.3 215.6 220.0 222.8 225.1 226.3 228.0 230.7 234.1 237.5 238.5 239.4 239.4 238.6 240.6 240.5 242.2 244.2 245.9 246.3 246.6 1.2% Table 25. Food Industry Energy Consumption 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2002- 2025 Carbon Dioxide Emissions 3/ (million metric tons) 87.8 89.4 87.5 87.8 89.2 90.2 90.9 91.4 92.2 93.5 94.5 95.7 96.7 97.7 98.6 99.6 100.8 101.9 102.9 104.1 105.4 107.0 108.7 110.3 112.1 1.0% Table 26. Paper Industry Energy Consumption 2001 2002 2003 2004 2005 2006 2007

163

Soil Sampling At Silver Peak Area (Henkle, Et Al., 2005) | Open...  

Open Energy Info (EERE)

Silver Peak Area (Henkle, Et Al., 2005) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Soil Sampling At Silver Peak Area (Henkle, Et Al., 2005)...

164

Exploration of the marine silver cycle in coastal and open ocean environments of the North Pacific.  

E-Print Network [OSTI]

??Five profiles of the silver concentration in the subArctic Northeast Pacific Ocean yield a broad correlation between the Ag content and dissolved Si. However, silver (more)

Kramer, Dennis

2010-01-01T23:59:59.000Z

165

,"Weekly Refiner Net Production"  

U.S. Energy Information Administration (EIA) Indexed Site

Refiner Net Production" Refiner Net Production" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Weekly Refiner Net Production",21,"Weekly","12/13/2013","6/4/2010" ,"Release Date:","12/18/2013" ,"Next Release Date:","12/27/2013" ,"Excel File Name:","pet_pnp_wprodr_s1_w.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_pnp_wprodr_s1_w.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202) 586-8800",,,"12/18/2013 10:39:21 AM"

166

Studies of the refining of crude cottonseed oil and its solutions in commercial hexane  

E-Print Network [OSTI]

with Different Concentrations of Caustic Soda................ 55 17. Refining of Diluted Cottonseed Oil-Hexane Fiscellas with 24? Re' Caustic Soda................................. 5^ Page LIST OF FIGURES (Continued) 18. Refining of FFOHR Cottonseed Oil.................................................... .65 21. Refining Cottonseed Oil Kiscellas with Ammonia Gas Followed by Caustic Re-refining......................... 67 22. Ammonium Hydroxide Refining of Cottonseed Oil-Hexane Kiscellas and Re-refining with 2.5$ of 20? Be' Caustic Soda...

Zeitoun, Mohamed Ali

2013-10-04T23:59:59.000Z

167

Developing Refined Products Storage in the Strategic Petroleum Reserve |  

Broader source: Energy.gov (indexed) [DOE]

Refined Products Storage in the Strategic Petroleum Refined Products Storage in the Strategic Petroleum Reserve Developing Refined Products Storage in the Strategic Petroleum Reserve May 12, 2009 - 3:14pm Addthis Statement of David F. Johnson, Deputy Assistant Secretary for Petroleum Reserves before the Committee on Energy and Natural Resources, United States Senate. Mr. Chairman and members of the Committee, I am pleased to be here today to discuss the issue of developing refined products storage in the Strategic Petroleum Reserve. As you know, the SPR was established by Congress through passage of the Energy Policy and Conservation Act in 1975 in response to the Arab oil embargoes. The primary policy of the U.S. petroleum stockpiling program has been to store crude oil. The SPR has served to protect our Nation from crude oil supply interruptions for over three

168

Secretary Bodman Tours Refinery and Calls for More Domestic Refining  

Broader source: Energy.gov (indexed) [DOE]

Tours Refinery and Calls for More Domestic Tours Refinery and Calls for More Domestic Refining Capacity Secretary Bodman Tours Refinery and Calls for More Domestic Refining Capacity May 18, 2006 - 10:43am Addthis Highlights President Bush's Four-Point Plan to Combat High Energy Prices PORT ARTHUR, TX - Secretary of Energy Samuel W. Bodman today renewed the call for expanded oil refining capacity in the United States and discussed additional steps the Department of Energy (DOE) is taking to prepare for the upcoming hurricane season. Secretary Bodman made the statements after touring the Motiva Refinery in Port Arthur, Texas. "We need a more robust energy sector; and one way to do that is to strengthen and expand our domestic oil refining capacity. We're hopeful that Motiva will continue to work to expand their capacity to 600,000

169

,"U.S. Refiner Acquisition Cost of Crude Oil"  

U.S. Energy Information Administration (EIA) Indexed Site

Acquisition Cost of Crude Oil" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Refiner...

170

Petroleum Products Table 43. Refiner Motor Gasoline Volumes...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

133.6 - 276.4 See footnotes at end of table. 220 Energy Information AdministrationPetroleum Marketing Annual 2000 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type,...

171

Petroleum Products Table 43. Refiner Motor Gasoline Volumes...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

201.3 - 453.3 See footnotes at end of table. 262 Energy Information Administration Petroleum Marketing Annual 1995 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type,...

172

Wind Simulation Refinement: Some New Challenges for Particle Methods  

Science Journals Connector (OSTI)

We present two new challenges related to the stochastic downscaling method (SDM) that we applied to wind simulation refinement in Bernardin et al. (Stoch....Particle in Cell methods. Then we turn to the uniform d...

C. Chauvin; F. Bernardin; M. Bossy

2010-01-01T23:59:59.000Z

173

Gulf Coast refiners gain access to more California crudes  

SciTech Connect (OSTI)

Refiners east of the Rockies, particularly Gulf Coast refiners, have gained access to easter and central California crudes with the opening of Celeron Corp.'s All American Pipeline (AAPL). Currently, AAPL is carrying a blend of California crudes with properties similar to Alaskan North Slope (ANS). Although the blend is moderate gravity and sulfur content, it is comprised of crudes from several fields in California that display wide variations in quality. Future deliveries east from California will be from regions with even more extremes of quality. To familiarize refiners with the crudes that will become available, some of the properties of these California crudes are discussed, along with some of the problems refiners may encounter in processing these materials.

Vautrain, J.H.; Sanderson, W.J.

1988-07-11T23:59:59.000Z

174

,"U.S. Total Refiner Acquisition Cost of Crude Oil"  

U.S. Energy Information Administration (EIA) Indexed Site

Crude Oil" "Sourcekey","R00003","R12003","R13003" "Date","U.S. Crude Oil Composite Acquisition Cost by Refiners (Dollars per Barrel)","U.S. Crude Oil Domestic...

175

Error estimation and adaptive mesh refinement for aerodynamic flows  

E-Print Network [OSTI]

Error estimation and adaptive mesh refinement for aerodynamic flows Ralf Hartmann1 and Paul Houston2 1 Institute of Aerodynamics and Flow Technology DLR (German Aerospace Center) Lilienthalplatz 7

Hartmann, Ralf

176

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

S O N D 0 10 20 30 40 50 60 70 1995 Cents per Gallon Excluding Taxes Retail < or 1% Wholesale < or 1% Retail > 1% Wholesale > 1% 7. U.S. Refiner Residual Fuel Oil Prices and...

177

May 28 Webinar to Focus on Tribal Energy Project Refinement  

Broader source: Energy.gov [DOE]

Register for the Tribal Renewable Energy Project Refinement webinar, which will be held on Wednesday, May 28, 2014, from 11 a.m. to 12:30 p.m. Mountain time.

178

Efficient Parallel Refinement for Hierarchical Radiosity on a DSM computer  

E-Print Network [OSTI]

Efficient Parallel Refinement for Hierarchical Radiosity on a DSM computer François X. Sillion memory (DSM) parallel architecture. Our task definition is based on a very fine grain decompo- sition

Paris-Sud XI, Université de

179

LCA of a spent lube oil Re-refining process  

Science Journals Connector (OSTI)

Although re-refining of spent lubricating oils (used oils) has been practiced with varying technical and commercial success for over the past 50 years, a sustainable processing technology has yet to become widely accepted. Poor on-stream efficiency, inconsistent product quality, and careless management of feedstock contaminants and byproducts have often resulted in widespread environmental problems and poor economics. Environmentally-conscious design of processes and products is increasingly viewed as an integral strategy in the sustainable development of new refining and chemical processes. Life cycle assessment is becoming the preferred methodology for comparing the environmental impacts of competing processes. A life cycle analyses of a promising new re-refining technology, the HyLubeTM process, has been undertaken to quantify the intrinsic benefits of HyLube re-refining over the current practice of recovering used oils for fuel value

Tom N. Kalnes; David R. Shonnard; Andreas Schuppel

2006-01-01T23:59:59.000Z

180

The crisis in Kuwait and U. S. refiners' travail  

SciTech Connect (OSTI)

The August 2, 1990, invasion of Kuwait on the part of Iraq has set in motion an accelerated domino affect in US fuels markets. The impact on US refiners has been generally negative, both in terms of margins and perceptions of same. This issue of Energy Detente (ED) updates a few directional indicators that affect refining margins and considers longer-term refining capacity requirements in the US. ED feels the invasion of Kuwait might force oil companies to allocate more talent, time, and financial resources to public affairs. This issue also contains the following: (1) The ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of Aug. 24, 1990; and (2) the ED Fuel Price/Tax Series for countries of the Eastern Hemisphere Aug. 1990 edition. 4 figs., 5 tabs.

Not Available

1990-08-31T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

CATALYTIC CONVERSION OF SOLVENT REFINED COAL TO LIQUID PRODUCTS  

E-Print Network [OSTI]

I. Solvent Refined Coal II. Catalysts III. Purpose andSondreal, E.A. , "Viscosity of Coal Liquids - The Effect ofAnthraxylon - Kinetics of Coal Hydrogenation," Ind. and Eng.

Tanner, K.I.

2010-01-01T23:59:59.000Z

182

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

2,026.7 W W 234.5 161.7 - 396.3 See footnotes at end of table. 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State 262 Energy Information...

183

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

2,222.4 W W 206.4 134.3 - 340.7 See footnotes at end of table. 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State 262 Energy Information...

184

Polygons in Buildings and their Refined Side Lengths  

E-Print Network [OSTI]

1999. [Bro] K. Brown, Buildings, Springer, 1989. [BuBI] D.AMS, 2001. [D] M. Davis, Buildings are CAT(0), in Geometryat Springerlink.com POLYGONS IN BUILDINGS AND THEIR REFINED

Kapovich, Michael; Leeb, Bernhard; Millson, John J.

2009-01-01T23:59:59.000Z

185

Hydrogen and Fuel Cells - Refining the Message Initiating a National Dialogue and Educational Agenda  

E-Print Network [OSTI]

Hydrogen and Fuel Cells Refining the Message Initiating aApril 1, 2005 Hydrogen and Fuel Cells Refining the Messagethe communication problem. Hydrogen and fuel cells have now

Eggert, Anthony; Kurani, Kenneth S; Turrentine, Tom; Ogden, Joan M; Sperling, Dan; Winston, Emily

2005-01-01T23:59:59.000Z

186

Former Corporation/Refiner Total Atmospheric Crude Oil Distillation Capacity  

U.S. Energy Information Administration (EIA) Indexed Site

Former Corporation/Refiner Former Corporation/Refiner Total Atmospheric Crude Oil Distillation Capacity (bbl/cd) New Corporation/Refiner Date of Sale Table 12. Refinery Sales During 2012 Antelope Refining LLC Garco Energy LLC 3/12 Douglas, WY 3,800 Delta Air Lines/Monroe Energy LLC ConocoPhillips Company 4/12 Trainer, PA 185,000 Phillips 66 Company ConocoPhillips Company 5/12 Belle Chasse, LA 252,000 Billings, MT 59,000 Ferndale, WA 101,000 Linden, NJ 238,000 Ponca City, OK 198,400 Rodeo, CA 120,200 Sweeny, TX 247,000 Westlake, LA 239,400 Wilmington, CA 139,000 Nustar Asphalt LLC (50% Nustar Energy LP and 50% Lindsay Goldberg LLC) Nustar Energy LP/Nustar Asphalt Refining LLC 9/12 Paulsboro, NJ 70,000 Savannah, GA 28,000 Carlyle Group/Philadelphia Energy Solutions Refining and Marketing LLC Sunoco Inc./Sunoco Inc. R&M

187

Carlsbad Field Office Receives New Mexico's Silver Award for  

Broader source: Energy.gov (indexed) [DOE]

Carlsbad Field Office Receives New Mexico's Silver Award for Carlsbad Field Office Receives New Mexico's Silver Award for Environmental Excellence Carlsbad Field Office Receives New Mexico's Silver Award for Environmental Excellence August 1, 2012 - 12:00pm Addthis DOE Carlsbad Field Office Deputy Manager Ed Ziemianski presents a Waste Isolation Pilot Plant (WIPP) team with the Green Zia Program Silver Level Leader award from the New Mexico Environment Department earlier this month in recognition of environmental initiatives. Shown right of Ziemianski is Farok Sharif, Washington TRU Solutions LLC, the WIPP management and operating contractor, President and General Manager. DOE Carlsbad Field Office Deputy Manager Ed Ziemianski presents a Waste Isolation Pilot Plant (WIPP) team with the Green Zia Program Silver Level

188

GRAIN REFINEMENT OF PERMANENT MOLD CAST COPPER BASE ALLOYS  

SciTech Connect (OSTI)

Grain refinement behavior of copper alloys cast in permanent molds was investigated. This is one of the least studied subjects in copper alloy castings. Grain refinement is not widely practiced for leaded copper alloys cast in sand molds. Aluminum bronzes and high strength yellow brasses, cast in sand and permanent molds, were usually fine grained due to the presence of more than 2% iron. Grain refinement of the most common permanent mold casting alloys, leaded yellow brass and its lead-free replacement EnviroBrass III, is not universally accepted due to the perceived problem of hard spots in finished castings and for the same reason these alloys contain very low amounts of iron. The yellow brasses and Cu-Si alloys are gaining popularity in North America due to their low lead content and amenability for permanent mold casting. These alloys are prone to hot tearing in permanent mold casting. Grain refinement is one of the solutions for reducing this problem. However, to use this technique it is necessary to understand the mechanism of grain refinement and other issues involved in the process. The following issues were studied during this three year project funded by the US Department of Energy and the copper casting industry: (1) Effect of alloying additions on the grain size of Cu-Zn alloys and their interaction with grain refiners; (2) Effect of two grain refining elements, boron and zirconium, on the grain size of four copper alloys, yellow brass, EnviroBrass II, silicon brass and silicon bronze and the duration of their effect (fading); (3) Prediction of grain refinement using cooling curve analysis and use of this method as an on-line quality control tool; (4) Hard spot formation in yellow brass and EnviroBrass due to grain refinement; (5) Corrosion resistance of the grain refined alloys; (6) Transfer the technology to permanent mold casting foundries; It was found that alloying elements such as tin and zinc do not change the grain size of Cu-Zn alloys. Aluminum promoted b phase formation and modified the grain structure from dendritic to equiaxed. Lead or bismuth reduces the size of grains, but not change the morphology of the structure in Cu-Zn alloys. The grain size of the Cu-Zn-alloy can be reduced from 3000 mm to 300 mm after the addition of aluminum and lead. Similar effects were observed in EnviroBrass III after the addition of aluminum and bismuth. Boron refined the structure of yellow brasses in the presence of iron. At least 50 ppm of iron and 3 ppm of boron are necessary to cause grain refinement in these alloys. Precipitation of iron from the melt is identified as the cause of grain refinement. Boron initiates the precipitation of iron which could not be explained at this time. On the other hand zirconium causes some reduction in grain size in all four alloys investigated. The critical limit for the zirconium was found to be around 100 ppm below which not much refinement could be observed. The mechanism of grain refinement in the presence of zirconium could not be explained. Grain refinement by boron and iron can remain over a long period of time, at least for 72 hours of holding or after remelting few times. It is necessary to have the iron and boron contents above the critical limits mentioned earlier. On the other hand, refinement by zirconium is lost quite rapidly, some times within one hour of holding, mostly due to the loss of zirconium, most probably by oxidation, from the melt. In all the cases it is possible to revive the refinement by adding more of the appropriate refining element. Cooling curve analysis (thermal analysis) can be used successfully to predict the grain refinement in yellow brasses. The precipitation of iron in the liquid metal causes the metal to solidify without undercooling. Absence of this reaction, as indicated by the time-temperature (t-T) and its first derivative (dt/dT) curves, proved to be an indicator of refinement. The viability of the technique as an on-line quality control tool was proved in two foundries. The method can also correctly predict the onset of fading. Th

M. SADAYAPPAN, J.P. THOMSON, M.ELBOUJDAINI, G. PING GU, M. SAHOO

2004-04-29T23:59:59.000Z

189

Adaptive mesh refinement for shocks and material interfaces  

SciTech Connect (OSTI)

There are three kinds of adaptive mesh refinement (AMR) in structured meshes. Block-based AMR sometimes over refines meshes. Cell-based AMR treats cells cell by cell and thus loses the advantage of the nature of structured meshes. Patch-based AMR is intended to combine advantages of block- and cell-based AMR, i.e., the nature of structured meshes and sharp regions of refinement. But, patch-based AMR has its own difficulties. For example, patch-based AMR typically cannot preserve symmetries of physics problems. In this paper, we will present an approach for a patch-based AMR for hydrodynamics simulations. The approach consists of clustering, symmetry preserving, mesh continuity, flux correction, communications, management of patches, and load balance. The special features of this patch-based AMR include symmetry preserving, efficiency of refinement across shock fronts and material interfaces, special implementation of flux correction, and patch management in parallel computing environments. To demonstrate the capability of the AMR framework, we will show both two- and three-dimensional hydrodynamics simulations with many levels of refinement.

Dai, William Wenlong [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

190

Contaminants in Used Lubricating Oils and Their Fate during Distillation/Hydrotreatment Re-Refining  

Science Journals Connector (OSTI)

Contaminants in Used Lubricating Oils and Their Fate during Distillation/Hydrotreatment Re-Refining ...

Dennis W. Brinkman; John R. Dickson

1995-01-01T23:59:59.000Z

191

Properties of Bulk Sintered Silver As a Function of Porosity  

SciTech Connect (OSTI)

This report summarizes a study where various properties of bulk-sintered silver were investigated over a range of porosity. This work was conducted within the National Transportation Research Center's Power Device Packaging project that is part of the DOE Vehicle Technologies Advanced Power Electronics and Electric Motors Program. Sintered silver, as an interconnect material in power electronics, inherently has porosity in its produced structure because of the way it is made. Therefore, interest existed in this study to examine if that porosity affected electrical properties, thermal properties, and mechanical properties because any dependencies could affect the intended function (e.g., thermal transfer, mechanical stress relief, etc.) or reliability of that interconnect layer and alter how its performance is modeled. Disks of bulk-sintered silver were fabricated using different starting silver pastes and different sintering conditions to promote different amounts of porosity. Test coupons were harvested out of the disks to measure electrical resistivity and electrical conductivity, thermal conductivity, coefficient of thermal expansion, elastic modulus, Poisson's ratio, and yield stress. The authors fully recognize that the microstructure of processed bulk silver coupons may indeed not be identical to the microstructure produced in thin (20-50 microns) layers of sintered silver. However, measuring these same properties with such a thin actual structure is very difficult, requires very specialized specimen preparation and unique testing instrumentation, is expensive, and has experimental shortfalls of its own, so the authors concluded that the herein measured responses using processed bulk sintered silver coupons would be sufficient to determine acceptable values of those properties. Almost all the investigated properties of bulk sintered silver changed with porosity content within a range of 3-38% porosity. Electrical resistivity, electrical conductivity, thermal conductivity, elastic modulus, Poisson's ratio, and yield stress all depended on the porosity content in bulk-sintered silver. The only investigated property that was independent of porosity in that range was coefficient of thermal expansion.

Wereszczak, Andrew A [ORNL; Vuono, Daniel J [ORNL; Wang, Hsin [ORNL; Ferber, Mattison K [ORNL; Liang, Zhenxian [ORNL

2012-06-01T23:59:59.000Z

192

Phase Transition and Thermal Decomposition of Silver Isocyanate (AgNCO)  

SciTech Connect (OSTI)

The thermal behavior of AgNCO (silver isocyanate) has been studied via thermal analysis, optical spectroscopy, X-ray powder diffraction and transmission electron microscopy. Upon quenching the high temperature polymorph (HT-AgNCO) to room temperature, a new modification has been obtained (q-AgNCO). Its crystal structure was solved from X-ray powder diffraction data and refined by the Rietveld method (Pmmn (no. 59), a = 3.579(3) A, b = 5.777(4) A, c = 5.807(2) A, V = 120.08(3) A3, Z = 2, T = 295 K). The structure consists of chains of Ag+ ions bridged by isocyanate units. HT-AgNCO exists between T = 135 C and the melting/decomposition point and exhibits virtually free rotation of the complex anions. According to preliminary single-crystal studies, HT-AgNCO (C2/m, a = 5.87 A, b = 3.51 A, c = 5.81 A, B = 105.953 degrees, Z = 2, T = 373 K) is structurally related to ?-NaN3. The crystal structures of both, HT-AgNCO and q-AgNCO have been compared with that of the room temperature modification (RT-AgNCO). The thermal behavior and the ionic conductivity of AgNCO are discussed with respect to the related compounds AgN3 and KSCN. Decomposition of AgNCO proceeds in distinct steps, as seen from TGA, and results in the formation of nanoparticles of elemental silver and an amorphous polymer consisting of C, N and O, only.

Schmidt, C.; Dinnebier, R; Jansen, M

2009-01-01T23:59:59.000Z

193

Adsorption of silver dimer on graphene - A DFT study  

SciTech Connect (OSTI)

We performed a systematic density functional theory (DFT) study of the adsorption of silver dimer (Ag{sub 2}) on graphene using SIESTA (Spanish Initiative for Electronic Simulations with Thousands of Atoms) package, in the generalized gradient approximation (GGA). The adsorption energy, geometry, and charge transfer of Ag2-graphene system are calculated. The minimum energy configuration for a silver dimer is parallel to the graphene sheet with its two atoms directly above the centre of carbon-carbon bond. The negligible charge transfer between the dimer and the surface is also indicative of a weak bond. The methodology demonstrated in this paper may be applied to larger silver clusters on graphene sheet.

Kaur, Gagandeep, E-mail: gaganj1981@yahoo.com [Department of Physics and Centre of Advanced Studies in Physics, Panjab University, Chandigarh-160014, India and Chandigarh Engineering College, Landran, Mohali-140307, Punjab (India); Gupta, Shuchi [Department of Physics and Centre of Advanced Studies in Physics, Panjab University, Chandigarh-160014, India and University Institute of Engineering and Technology, Panjab University, Chandigarh -160014 (India); Rani, Pooja; Dharamvir, Keya [Department of Physics and Centre of Advanced Studies in Physics, Panjab University, Chandigarh-160014 (India)

2014-04-24T23:59:59.000Z

194

Refining Crude Oil - Energy Explained, Your Guide To Understanding Energy -  

Gasoline and Diesel Fuel Update (EIA)

Oil and Petroleum Products > Refining Crude Oil Oil and Petroleum Products > Refining Crude Oil Energy Explained - Home What Is Energy? Forms of Energy Sources of Energy Laws of Energy Units and Calculators Energy Conversion Calculators British Thermal Units (Btu) Degree-Days U.S. Energy Facts State and U.S. Territory Data Use of Energy In Industry For Transportation In Homes In Commercial Buildings Efficiency and Conservation Energy and the Environment Greenhouse Gases Effect on the Climate Where Emissions Come From Outlook for Future Emissions Recycling and Energy Nonrenewable Sources Oil and Petroleum Products Refining Crude Oil Where Our Oil Comes From Imports and Exports Offshore Oil and Gas Use of Oil Prices and Outlook Oil and the Environment Gasoline Where Our Gasoline Comes From Use of Gasoline Prices and Outlook

195

Integration Strategy of Gasification Technology:? A Gateway to Future Refining  

Science Journals Connector (OSTI)

The historical evidence of the operation of a coal gasification plant goes as far back in time as 1878.1 The United State's first power plant based on coal gasification technology was installed in 1980.2 The concept of gasification has begun to attract much attention from the refining industry because of stringent environmental regulations on transportation fuel, slashing demands for fuel oils, and uncertainty in the availability of good crude oils. ... Therefore, it is a challenging task for refining industries to economically integrate gasification technology, and this is the major theme of the paper. ... Gasification is superior to many of the available power production and waste disposal technologies by addressing various issues together regarding environmental emissions, maintaining quality of refining products, and waste management. ...

Jhuma Sadhukhan; X. X. Zhu

2002-02-09T23:59:59.000Z

196

Chapter 1 - Refining Heavy Oil and Extra-heavy Oil  

Science Journals Connector (OSTI)

The definitions of heavy oil, extra-heavy oil, and tar sand bitumen are inadequate insofar as the definitions rely upon a single physical property to define a complex feedstock. This chapter presents viable options to the antiquated definitions of the heavy feedstocks (heavy oil, extra-heavy oil, and tar sand bitumen) as well as an introduction to the various aspects of heavy feedstock refining in order for the reader to place each feedstock in the correct context of properties, behavior, and refining needs.

James G. Speight

2013-01-01T23:59:59.000Z

197

Petroleum Refining Operations: Key Issues, Advances, and Opportunities  

Science Journals Connector (OSTI)

A typical petroleum industry supply chain is composed of an exploration phase at the wellhead, crude procurement and storage logistics, transportation to the refineries, refinery operations, and distribution and delivery of its products (Figure 1). ... This network is used to transport crude from wellhead to refinery for processing, to transport intermediates between multisite refining facilities, and to transport finished products from product storage tanks to distribution centers and finally to the customers. ... In common-carrier pipelines, however, several refineries located at different sites use the same trunk line for shipping refined petroleum products to downstream output terminals. ...

Nikisha K. Shah; Zukui Li; Marianthi G. Ierapetritou

2010-12-10T23:59:59.000Z

198

National oil companies' presence to hike US refining competition  

SciTech Connect (OSTI)

This paper reports that the downstream segment of the U.S. petroleum business is virtually certain to become more competitive because of the growing presence of national oil companies in the country's refining industry. That's a forecast by New York investment firm Kidder Peabody. It cites a plan by Mexico's Petroleos Mexicanos (Pemex) to form a joint venture with Shell Oil Co. covering Shell's 225,000 b/d Deer Park, Tex., refinery as the latest example of national oil companies' movement into U.S. refining.

Not Available

1992-09-21T23:59:59.000Z

199

C:\Eco-SSLs\Contaminant Specific Documents\Silver\September 2006\Eco-SSL for Silver Sept 06.wpd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Silver Silver Interim Final OSWER Directive 9285.7-77 U.S. Environmental Protection Agency Office of Solid Waste and Emergency Response 1200 Pennsylvania Avenue, N.W. Washington, DC 20460 September 2006 This page intentionally left blank i TABLE OF CONTENTS 1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 SUMMARY OF ECO-SSLs FOR SILVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3.0 ECO-SSL FOR TERRESTRIAL PLANTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4.0 ECO-SSL FOR SOIL INVERTEBRATES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5.0 ECO-SSL FOR AVIAN WILDLIFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5.1 Avian TRV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5.2 Estimation of Dose and Calculation of the Eco-SSL . . . . . . . . . . . . . . . . . . . . . . . . 8 6.0

200

Silver Spring Networks | Open Energy Information  

Open Energy Info (EERE)

Networks Networks Jump to: navigation, search Name Silver Spring Networks Address 575 Broadway Street Place Redwood City, California Zip 94063 Sector Efficiency Product Energy efficiency Website http://www.silverspringnetwork Coordinates 37.4858629°, -122.2067269° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.4858629,"lon":-122.2067269,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

EA-1921: Silver Peak Area Geothermal Exploration Project Environmental  

Broader source: Energy.gov (indexed) [DOE]

921: Silver Peak Area Geothermal Exploration Project 921: Silver Peak Area Geothermal Exploration Project Environmental Assessment, Esmeralda County, Nevada EA-1921: Silver Peak Area Geothermal Exploration Project Environmental Assessment, Esmeralda County, Nevada SUMMARY The Bureau of Land Management (BLM)(lead agency) and DOE are jointly preparing this EA, which evaluates the potential environmental impacts of a project proposed by Rockwood Lithium Inc (Rockwood), formerly doing business as Chemetall Foote Corporation. Rockwood has submitted to the BLM, Tonopah Field Office, an Operations Plan for the construction, operation, and maintenance of the Silver Peak Area Geothermal Exploration Project within Esmeralda County, Nevada. The purpose of the project is to determine subsurface temperatures, confirm the existence of geothermal resources, and

202

Multispectral Imaging At Silver Peak Area (Laney, 2005) | Open Energy  

Open Energy Info (EERE)

Laney, 2005) Laney, 2005) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Multispectral Imaging At Silver Peak Area (Laney, 2005) Exploration Activity Details Location Silver Peak Area Exploration Technique Multispectral Imaging Activity Date Usefulness not indicated DOE-funding Unknown Notes Geology and Geophysics of Geothermal Systems, Gregory Nash, 2005. A third objective was testing ASTER multispectral data for small-scale mapping of the geology of the northern Silver Peak Range, Nevada near the Fish Lake Valley geothermal field. References Patrick Laney (2005) Federal Geothermal Research Program Update - Fiscal Year 2004 Retrieved from "http://en.openei.org/w/index.php?title=Multispectral_Imaging_At_Silver_Peak_Area_(Laney,_2005)&oldid=511017"

203

EA-1921: Silver Peak Area Geothermal Exploration Project Environmental  

Broader source: Energy.gov (indexed) [DOE]

921: Silver Peak Area Geothermal Exploration Project 921: Silver Peak Area Geothermal Exploration Project Environmental Assessment, Esmeralda County, Nevada EA-1921: Silver Peak Area Geothermal Exploration Project Environmental Assessment, Esmeralda County, Nevada SUMMARY The Bureau of Land Management (BLM)(lead agency) and DOE are jointly preparing this EA, which evaluates the potential environmental impacts of a project proposed by Rockwood Lithium Inc (Rockwood), formerly doing business as Chemetall Foote Corporation. Rockwood has submitted to the BLM, Tonopah Field Office, an Operations Plan for the construction, operation, and maintenance of the Silver Peak Area Geothermal Exploration Project within Esmeralda County, Nevada. The purpose of the project is to determine subsurface temperatures, confirm the existence of geothermal resources, and

204

Resistivity Tomography At Silver Peak Area (DOE GTP) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Tomography At Silver Peak Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Silver Peak Area (DOE GTP) Exploration Activity Details Location Silver Peak Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Resistivity_Tomography_At_Silver_Peak_Area_(DOE_GTP)&oldid=689883" Categories:

205

Synthesis of Silver Colloids: Experiment and Computational Model  

E-Print Network [OSTI]

We summarize our recent results that model the formation of uniform spherical silver colloids prepared by mixing iso-ascorbic acid and silver-amine complex solutions in the absence of dispersants. We found that the experimental results can be modeled effectively by the two-stage formation mechanism used previously to model the preparation of colloidal gold spheres. The equilibrium concentration of silver atoms and the surface tension of silver precursor nanocrystals are both treated as free parameters, and the experimental reaction time scale is fit by a narrow region of this two-parameter space. The kinetic parameter required to match the final particle size is found to be very close to that used previously in modeling the formation of uniform gold particles, suggesting that similar kinetics governs the aggregation process. The model also reproduces semi quantitatively the effects of temperature and solvent viscosity on particle synthesis.

Ionel Halaciuga; Daniel T. Robb; Vladimir Privman; Dan V. Goia

2008-09-30T23:59:59.000Z

206

Effect of Oxygen Pressure on the Melting of Silver  

Science Journals Connector (OSTI)

... silver strip about 6 mm long, 1 mm wide and 0.09 mm thick was roughened with emery paper and the ends welded to two stout gold wires. A thermocouple ...

E. H. BAKER; J. K. JOHNSTONE

1965-01-02T23:59:59.000Z

207

Luminescence of Cds Nanoparticles Doped with Silver Ions  

Science Journals Connector (OSTI)

The optical characteristics of CdS nanoparticles doped with silver ions and produced in aqueous...+...ions in the composition of the semiconductor nanoparticles at which it is possible to increase their luminesce...

G. Ya. Grodzyuk; V. V. Shvalagin; S. R. Lavorik

2014-09-01T23:59:59.000Z

208

(Data in metric tons of silver content unless otherwise noted)  

E-Print Network [OSTI]

in photographic wastewater may be recycled. Silver demand for use in photographic applications, jewelry reliance 7 as a percentage of apparent consumption 61 58 65 64 57 Recycling: In 2012, approximately 1

209

In situ Oxidation of Ultrathin Silver Films on Ni(111)  

SciTech Connect (OSTI)

Oxidation of silver films of one- and two-monolayer thicknesses on the Ni(111) surface was investigated by low-energy electron microscopy at temperatures of 500 and 600 K. Additionally, intensity-voltage curves were measured in situ during oxidation to reveal the local film structure on a nanometer scale. At both temperatures, we find that exposure to molecular oxygen leads to the destabilization of the Ag film with subsequent relocation of the silver atoms to small few-layer-thick silver patches and concurrent evolution of NiO(111) regions. Subsequent exposure of the oxidized surface to ethylene initiates the transformation of bilayer islands back into monolayer islands, demonstrating at least partial reversibility of the silver relocation process at 600 K.

A Meyer; I Flege; S Senanayake; B Kaemena; R Rettew; F Alamgir; J Falta

2011-12-31T23:59:59.000Z

210

NNSA awards Eileen Johnston Silver Medal | National Nuclear Security  

National Nuclear Security Administration (NNSA)

awards Eileen Johnston Silver Medal | National Nuclear Security awards Eileen Johnston Silver Medal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > NNSA awards Eileen Johnston Silver Medal NNSA awards Eileen Johnston Silver Medal Posted By Office of Public Affairs Eileen Johnston Eileen Johnston, assistant manager for Safeguards and

211

Hybrid Systems of Silver Nanoparticles Generated on Cellulose Surfaces  

Science Journals Connector (OSTI)

(4-7) For instance, polymer supported silver NPs at the moment are attracting much attention in biomedical applications, due to the antibacterial character, enabling their use in wound dressing materials, body wall repairs, tissue scaffolds, or even antimicrobial filters. ... (26) Recently, a cellulose acetate nanofibrillar aerogel structure with about 6 wt % loading content of Ag NPs was prepared. ... Graft copolymerization onto cellulose-based filter paper and its further development as silver nanoparticles loaded antibacterial food-packaging material ...

Ana Maria Ferraria; Sami Boufi; Nicolas Battaglini; Ana Maria Botelho do Rego; Manuel ReiVilar

2009-11-06T23:59:59.000Z

212

Application of advanced diesel technology to inland waterway towboats. variable timing, electronic fuel injection. Final report, September 1985-January 1989  

SciTech Connect (OSTI)

This report represents the test and evaluation of advanced diesel technology components on the DDC Series 149 Marine engine. The tests were conducted on an inland-waterways towboat and consist of over 20,000 engine hours of operation during the testing. The Detroit Diesel Series 16V-149 engine rated at 900 SHP was tested aboard the M/V ESCATAWPA owned and operated by Warrior and Gulf Navigation Company. Both port and starboard engines were instrumented to measure engine operating parameters, propeller-shaft torque, and fuel consumption. The data were collected by a computer-based data-acquisition system and written to floppy disc for analysis. The tasks included: (1) baseline evaluation of naturally-aspirated (NA) engines; (2) upgrade both engines to turbocharged intercooled and blower bypassed (TIB) configuration and measure performance; (3) upgrade port engine with Detroit Diesel electronic control (DDEC) and measure performance; (4) change port engine to high-torque rise governor setting and measure performance; (5) upgrade starboard engine with DDEC.

Rowland, D.P.

1989-03-01T23:59:59.000Z

213

Department of Computing Stepwise Refinement in Event-B||CSP  

E-Print Network [OSTI]

in Event-B||CSP Part 1: Safety Steve Schneider, Helen Treharne and Heike Wehrheim March 12th 2011 #12;Stepwise Refinement in Event-B CSP Part 1: Safety Steve Schneider1 Helen Treharne1 Heike Wehrheim2 1, 2011 Contents 1 Introduction 3 2 CSP 3 2.1 Notation

Doran, Simon J.

214

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1996 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

215

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Gasoline and Diesel Fuel Update (EIA)

4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1997 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

216

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Gasoline and Diesel Fuel Update (EIA)

4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1995 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

217

Delaunay Refinement for Piecewise Smooth Complexes Siu-Wing Cheng  

E-Print Network [OSTI]

a Lipschitz-like property. A Delaunay refinement algo- rithm using the weighted Voronoi diagram is shown]. However, an algorithm that handles input as general as piecewise smooth complexes (PSC) is still lacking. There is a need in solid modeling to represent objects that are dimensionally or materially inhomogeneous [22

Cheng, Siu-Wing

218

Kenney: The USSOCOM Trinity The USSOCOM Trinity: Refining Special Operations  

E-Print Network [OSTI]

was that the American military would plan, train, and equip to conduct major combat operations on opposite sidesKenney: The USSOCOM Trinity 1 The USSOCOM Trinity: Refining Special Operations Commitment to 21st on the United States Special Operations Command and recommends means and methods to capitalize on current

219

Liver vasculature refinement with multiple 3D structuring element shapes  

Science Journals Connector (OSTI)

Delineating anatomical structures and other regions of interest is an important component of assisting and automating specific diagnostic, radiological, and surgical tasks. In this paper, a segmentation approach for liver region delineation is proposed, ... Keywords: 3D structuring element, Hysteresis thresholding, Mathematical morphology, Region growing, Texture analysis, Vessel tree refinement

Do-Yeon Kim

2014-08-01T23:59:59.000Z

220

Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

W W 78.6 W 85.7 81.8 W 69.3 73.8 See footnotes at end of table. 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District and State 176 Energy Information...

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

W 70.5 78.9 W 76.0 83.6 W 69.2 75.2 See footnotes at end of table. 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District and State 176 Energy Information...

222

TOPICAL PAPER Potential Synergies and Challenges in Refining Cellulosic Biomass  

E-Print Network [OSTI]

TOPICAL PAPER Potential Synergies and Challenges in Refining Cellulosic Biomass to Fuels, Chemicals that can reduce greenhouse gas emissions, enhance energy security, improve the economy, dispose of such products, and sugar costs are predicted to drop with plant size as a result of economies of scale

California at Riverside, University of

223

Surface-enhanced Raman scattering from silver electrodes  

SciTech Connect (OSTI)

The chemical and physical origins of the anomalously large enhancement of the Raman scattering cross section for molecules adsorbed on silver electrodes in an electrochemical cell were investigated. The effect of the chemical reactions which occur during the anodization/activation procedure were studied using the Ag-CN system. It was shown that the function of the anodization process is to roughen the electrode surface and create an activated site for bonding to the cyanide. A new nonelectrochemical technique for activating the silver surface, along with a study of the enhanced cyanide Raman scattering in different background electrolytes, showed that the Raman active entity on the surface must be a silver-cyanide complex. In order to study the physical mechanism of the enhancement, the angular dependence of the scattered radiation was measured from pyridine adsorbed on an evaporated silver electrode. Both polycrystalline and single crystalline silver films were used. The angular dependence of the scattered radiation from these films showed that the metal surface was controlling the directional properties of the scattered radiation, and not the polarizability tensor of the adsorbate. Based on these experimental results, it was concluded that for weakly roughened silver electrodes the source of the anomalous enhancement is due to a resonant Raman scattering process.

Trott, G.R.

1982-01-01T23:59:59.000Z

224

Inland-transport modes for coal and coal-derived energy: an evaluation method for comparing environmental impacts  

SciTech Connect (OSTI)

This report presents a method for evaluating relative environmental impacts of coal transportation modes (e.g., unit trains, trucks). Impacts of each mode are evaluated (rated) for a number of categories of environmental effects (e.g., air pollution, water pollution). The overall environmental impact of each mode is determined for the coal origin (mine-mouth area), the coal or coal-energy product destination (demand point), and the line-haul route. These origin, destination, and en route impact rankings are then combined into a systemwide ranking. Thus the method accounts for the many combinations of transport modes, routes, and energy products that can satisfy a user's energy demand from a particular coal source. Impact ratings and system rankings are not highly detailed (narrowly defined). Instead, environmental impacts are given low, medium, and high ratings that are developed using environmental effects data compiled in a recent Argonne National Laboratory report entitled Data for Intermodal Comparison of Environmental Impacts of Inland Transportation Alternatives for Coal Energy (ANL/EES-TM-206). The ratings and rankings developed for this report are generic. Using the method presented, policy makers can apply these generic data and the analytical framework given to particular cases by adding their own site specific data and making some informed judgements. Separate tables of generic ratings and rankings are developed for transportation systems serving coal power plants, coal liquefaction plants, and coal gasification plants. The final chapter presents an hypothetical example of a site-specific application and adjustment of generic evaluations. 44 references, 2 figures, 14 tables.

Bertram, K.M.

1983-06-01T23:59:59.000Z

225

Atlantic Basin Refining Dynamics from U.S. Perspective  

Gasoline and Diesel Fuel Update (EIA)

This presentation focuses on the current refining situation in the Atlantic Basin, This presentation focuses on the current refining situation in the Atlantic Basin, Page 1 including some discussion on how we got here, and on drivers that will influence the next 5 years. I will focus on three topics today that are critical to the petroleum product dynamics of Page 2 the Atlantic Basin over the next several years. The first is product demand growth - something that has been affected both by the recession and legislation. Next I will cover the supply situation for gasoline and distillates in the Atlantic Basin, since Europe and the U.S. are closely entwined in these markets. Last, we will visit the outlook for those drivers affecting profitability - an area of large uncertainty. I will begin today with a short discussion of important underlying long-term trends in U.S.

226

,"U.S. Sales for Resale, Total Refiner Motor Gasoline Sales Volumes...  

U.S. Energy Information Administration (EIA) Indexed Site

for Refiner Gasoline Volumes" "Sourcekey","A103700001" "Date","U.S. Total Gasoline WholesaleResale Volume by Refiners (Thousand Gallons per Day)" 30331,217871.4 30362,217946.8...

227

Development of miscella refining process for cottonseed oil-isopropyl alcohol system: laboratory-scale evaluations  

E-Print Network [OSTI]

A technologically feasible cottonseed oil-isopropyl alcohol (IPA) miscella refining process was developed to produce high quality cottonseed oil. Individual steps necessary to refine cottonseed oil-IPA miscella were determined and improved...

Chau, Chi-Fai

1994-01-01T23:59:59.000Z

228

The Extraction?Flocculation Re-refining Lubricating Oil Process Using Ternary Organic Solvents  

Science Journals Connector (OSTI)

The Extraction?Flocculation Re-refining Lubricating Oil Process Using Ternary Organic Solvents ... Res., 1997, 36 (9), ... Waste lubricating oils may be re-refined with organic solvents that dissolve base oil and segregate the additives and solid particles. ...

J. P. Martins

1997-09-02T23:59:59.000Z

229

Life cycle and matrix analyses for re-refined Oil in Japan  

Science Journals Connector (OSTI)

Unstable market systems and consumer preferences for virgin oil have inhibited the development of waste oil re-refining in Japan. In this papery comparative life cycle inventories were developed for re-refining w...

Chie Nakaniwa; Thomas E. Graedel

2002-03-01T23:59:59.000Z

230

On the limits of refinement-testing for model-checking CSP  

Science Journals Connector (OSTI)

Refinement-checking, as embodied in tools like FDR, PAT and ProB, is a popular approach for model-checking refinement-closed predicates of CSP processes. We consider the limits of this ... denotational predicate ...

Toby Murray

2013-03-01T23:59:59.000Z

231

RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company...  

Office of Environmental Management (EM)

RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company, Inc.Commonwealth of Puerto Rico RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company, Inc....

232

Fact #676: May 23, 2011 U.S. Refiners Produce about 19 Gallons...  

Energy Savers [EERE]

6: May 23, 2011 U.S. Refiners Produce about 19 Gallons of Gasoline from a Barrel of Oil Fact 676: May 23, 2011 U.S. Refiners Produce about 19 Gallons of Gasoline from a Barrel of...

233

Argonne CNM News: Ambient-Stable Tetragonal Phase in Silver Nanowires  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ambient-Stable Tetragonal Phase in Silver Nanowires Ambient-Stable Tetragonal Phase in Silver Nanowires Silver nanowires SEM image of randomly assembled silver nanowires and low-resolution TEM image (inset) of a cross-sectional sample of an individual nanowire. Scale bar represents 500 nm SIlver nanowire with fivefold symmetry Schematic drawing of a silver nanowire with fivefold symmetry. Cross-section of individual silver nanowire High-resolution TEM image of a cross-sectional sample of an individual silver nanowire. Scale bar represents 5 nm. A stable non-face-centered-cubic phase in noble metal nanoparticles has been reported for this first time by researchers at the Center for Nanoscale Materials (Nanophotonics & NanoBio Interfaces Groups) working with colleagues at the Advanced Photon Source and Electron Microscopy

234

Schneider Electric Goes Platinum-and Silver-in Superior Energy...  

Broader source: Energy.gov (indexed) [DOE]

Schneider Electric Goes Platinum-and Silver-in Superior Energy Performance Schneider Electric Goes Platinum-and Silver-in Superior Energy Performance October 1, 2014 - 11:33am...

235

(Data in metric tons1 of silver content unless otherwise noted)  

E-Print Network [OSTI]

. This includes 60 to 90 tons of silver that are reclaimed and recycled annually from photographic wastewater 53 61 65 Recycling: Approximately 1,000 tons of silver was recovered from old and new scrap in 2006

236

REFINING AND END USE STUDY OF COAL LIQUIDS  

SciTech Connect (OSTI)

This document summarizes all of the work conducted as part of the Refining and End Use Study of Coal Liquids. There were several distinct objectives set, as the study developed over time: (1) Demonstration of a Refinery Accepting Coal Liquids; (2) Emissions Screening of Indirect Diesel; (3) Biomass Gasification F-T Modeling; and (4) Updated Gas to Liquids (GTL) Baseline Design/Economic Study.

Unknown

2002-01-01T23:59:59.000Z

237

Evolutions in 3D numerical relativity using fixed mesh refinement  

E-Print Network [OSTI]

We present results of 3D numerical simulations using a finite difference code featuring fixed mesh refinement (FMR), in which a subset of the computational domain is refined in space and time. We apply this code to a series of test cases including a robust stability test, a nonlinear gauge wave and an excised Schwarzschild black hole in an evolving gauge. We find that the mesh refinement results are comparable in accuracy, stability and convergence to unigrid simulations with the same effective resolution. At the same time, the use of FMR reduces the computational resources needed to obtain a given accuracy. Particular care must be taken at the interfaces between coarse and fine grids to avoid a loss of convergence at higher resolutions, and we introduce the use of "buffer zones" as one resolution of this issue. We also introduce a new method for initial data generation, which enables higher-order interpolation in time even from the initial time slice. This FMR system, "Carpet", is a driver module in the freely available Cactus computational infrastructure, and is able to endow generic existing Cactus simulation modules ("thorns") with FMR with little or no extra effort.

Erik Schnetter; Scott H. Hawley; Ian Hawke

2004-03-02T23:59:59.000Z

238

Refinement and verification of concurrent systems specified in ObjectZ and CSP  

E-Print Network [OSTI]

Refinement and verification of concurrent systems specified in Object­Z and CSP Graeme Smith­Z and CSP. A common semantic basis for the two languages enables a unified method of refinement to be used, based upon CSP refinement. To enable state­based techniques to be used for the Object­Z components

Smith, Graeme

239

A Multi-Tiered Genetic Algorithm for Data Mining and Hypothesis Refinement  

E-Print Network [OSTI]

. The second stage of testing was on the ability to take results from a previous algorithm and perform refinement on the data model. Initially, Arcanum was used to refine its own data models. Of the six data models used for hypothesis refinement, Arcanum...

Taylor, Christopher M.

2009-01-01T23:59:59.000Z

240

Sterling science: Strain in silver nanoparticles creates unusual  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sterling science: Strain in silver nanoparticles creates unusual Sterling science: Strain in silver nanoparticles creates unusual "twinning" By Jared Sagoff * August 27, 2012 Tweet EmailPrint When twins are forced to share, it can put a significant strain on their relationship. While this observation is perhaps unsurprising in the behavior of children, it is less obvious when it comes to nanoparticles. After spending close to a decade examining the structure of nanowires made of pure silver, scientists at the U.S. Department of Energy's (DOE) Argonne National Laboratory have discovered a set of unusual behaviors in nanocrystals with a strained, five-fold symmetry formed by "twinning" in the crystal structure. The twinned crystals' unusual pentagonal symmetry and complicated structures distinguish them from the cubic

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Microsoft Word - SilverCreek-Fiber-CX.doc  

Broader source: Energy.gov (indexed) [DOE]

John Brank John Brank Customer Service Engineer - TPC-OLYMPIA Proposed Action: Silver Creek Substation fiber project Budget Information: Work Order 253198, Task 03 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.7 Adding fiber optic cable to transmission structures or burying fiber optic cable in existing transmission line rights of way. Locations: Silver Creek Substation, Lewis County, Washington (T12N R2E SEC17) Proposed by: Bonneville Power Administration (BPA) and Lewis County Public Utility District (PUD) Description of the Proposed Action: BPA proposes to connect a fiber optic cable from an existing Lewis County PUD transmission line into the BPA Silver Creek Substation in Lewis County, Washington. The fiber project is needed to increase transmission system

242

Silver Peak Innovative Exploration Project (Ram Power Inc.)  

SciTech Connect (OSTI)

Data generated from the Silver Peak Innovative Exploration Project, in Esmeralda County, Nevada, encompasses a deep-circulation (amagmatic) meteoric-geothermal system circulating beneath basin-fill sediments locally blanketed with travertine in western Clayton Valley (lithium-rich brines from which have been mined for several decades). Spring- and shallow-borehole thermal-water geochemistry and geothermometry suggest that a Silver Peak geothermal reservoir is very likely to attain the temperature range 260- 300oF (~125-150oC), and may reach 300-340oF (~150-170oC) or higher (GeothermEx, Inc., 2006). Results of detailed geologic mapping, structural analysis, and conceptual modeling of the prospect (1) support the GeothermEx (op. cit.) assertion that the Silver Peak prospect has good potential for geothermal-power production; and (2) provide a theoretical geologic framework for further exploration and development of the resource. The Silver Peak prospect is situated in the transtensional (regional shearing coupled with extension) Walker Lane structural belt, and squarely within the late Miocene to Pliocene (11 Ma to ~5 Ma) Silver Peak-Lone Mountain metamorphic core complex (SPCC), a feature that accommodated initial displacement transfer between major right-lateral strike- slip fault zones on opposite sides of the Walker Lane. The SPCC consists essentially of a ductiley-deformed lower plate, or core, of Proterozoic metamorphic tectonites and tectonized Mesozoic granitoids separated by a regionally extensive, low-angle detachment fault from an upper plate of severely stretched and fractured structural slices of brittle, Proterozoic to Miocene-age lithologies. From a geothermal perspective, the detachment fault itself and some of the upper-plate structural sheets could function as important, if secondary, subhorizontal thermal-fluid aquifers in a Silver Peak hydrothermal system.

Miller, Clay

2010-01-01T23:59:59.000Z

243

Distribution and food habits of the inland silverside, Menidia beryllina, and the northern brook silverside, Labidesthes sicculus, in Lake Conroe, Texas  

E-Print Network [OSTI]

species in seine catches varied similarly among the stations. Stations with gradual offshore slopes and sandy sediments had the greatest catches of both silverside species. Inland silverside abundance showed significant temporal variation due...-lm), offshore (0-1m) and offshore (0-2m). Density of zooplankters was greatest in the offshore samples, but little variation among stations occurred. Sididae was the j* pl kt*t h i h~1, hil ~Ctd*h' th major zooplankter in the offshore samples. Selectivity...

Morris, Joseph Eugene

2012-06-07T23:59:59.000Z

244

Investigation of silver electrodeposition on polycrystalline platinum by iodine chemisorption  

E-Print Network [OSTI]

Qb)ja'A (12) Silver electrodeposition onto the I-pretreated polycrystalline Pt electrode was done using 2 mM AgC104 in 1 M H2SO4. Under these conditions, Ag deposition consists of two underpotential deposition peaks at 0. 65 and 0. 50 V (peaks 1...INVESTIGATION OF SILVER ELECIRODEPOSITION ON POLYCRYSTALLINE PLATINUM BY IODINE CHEMISORPTION A Thesis by JOHN EUGENE HARRIS Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements...

Harris, John Eugene

1988-01-01T23:59:59.000Z

245

The European land and inland water CO2, CO, CH4 and N2O balance between 2001 and 2005  

SciTech Connect (OSTI)

Globally, terrestrial ecosystems have absorbed about 30% of anthropogenic greenhouse gas emissions over the period 2000-2007 and inter-hemispheric gradients indicate that a significant fraction of terrestrial carbon sequestration must be north of the Equator. We present a compilation of the CO{sub 2}, CO, CH{sub 4} and N{sub 2}O balances of Europe following a dual constraint approach in which (1) a land-based balance derived mainly from ecosystem carbon inventories and (2) a land-based balance derived from flux measurements are compared to (3) the atmospheric data-based balance derived from inversions constrained by measurements of atmospheric GHG (greenhouse gas) concentrations. Good agreement between the GHG balances based on fluxes (1294 {+-} 545 Tg C in CO{sub 2}-eq yr{sup -1}), inventories (1299 {+-} 200 Tg C in CO{sub 2}-eq yr{sup -1}) and inversions (1210 {+-} 405 Tg C in CO{sub 2}-eq yr{sup -1}) increases our confidence that the processes underlying the European GHG budget are well understood and reasonably sampled. However, the uncertainty remains large and largely lacks formal estimates. Given that European net land to atmosphere exchanges are determined by a few dominant fluxes, the uncertainty of these key components needs to be formally estimated before efforts could be made to reduce the overall uncertainty. The net land-to-atmosphere flux is a net source for CO{sub 2}, CO, CH{sub 4} and N{sub 2}O, because the anthropogenic emissions by far exceed the biogenic sink strength. The dual-constraint approach confirmed that the European biogenic sink removes as much as 205 {+-} 72 Tg C yr{sup -1} from fossil fuel burning from the atmosphere. However, This C is being sequestered in both terrestrial and inland aquatic ecosystems. If the C-cost for ecosystem management is taken into account, the net uptake of ecosystems is estimated to decrease by 45% but still indicates substantial C-sequestration. However, when the balance is extended from CO{sub 2} towards the main GHGs, C-uptake by terrestrial and aquatic ecosystems is offset by emissions of non-CO{sub 2} GHGs. As such, the European ecosystems are unlikely to contribute to mitigating the effects of climate change.

Luyassaert, S [CEA-CNRS-UVSQ, LSCE; Abril, G [Laboratoire EPOC, CNRS; Andres, Robert Joseph [ORNL; Bastviken, D [Linkoping University; Bellassen, V [CEA-CNRS-UVSQ, LSCE; Bergamaschi, P [European Commission Joint Research Centre; Bousquet, P [CEA-CNRS-UVSQ, LSCE; Chevallier, F [CEA-CNRS-UVSQ, LSCE; Ciais, P. [LSCE/CEA, Gif-sur-Yvette, France; Corazza, M [European Commission Joint Research Centre; Dechow, R [Johann Heinrich von Thnen Institute; Erb, K-H [Alpen-Adria Universitaet Klagenfurt-Vienna-Graz; Etiope, G [Istituto Nazionale di Geofisica e Vulcanologia; Fortems-Cheiney, A [CEA-CNRS-UVSQ, LSCE; Grassi, G [European Commission Joint Research Centre; Hartmann, J [University of Hamburg; Jung, M. [Max Planck Institute for Biogeochemistry; Lathiere, J [CEA-CNRS-UVSQ, LSCE; Lohila, A [Finnish Meteorological institute; Mayorga, E [University of Washington; Moosdorf, N [University of Hamburg; Njakou, D [University of Antwerp; Otto, J [CEA-CNRS-UVSQ, LSCE; Papale, D. [University of Tuscia; Peters, W [Wageningen University and Research Centre, The Netherlands; Peylin, P [CEA-CNRS-UVSQ, LSCE; Raymond, Peter A [Yale School of Forestry and Environmental Studies; Rodenbeck, C [Max Planck Institute for Biogeochemistry; Saarnio, S [University of Eastern Finland; Schulze, E.-D. [Max Planck Institute for Biogeochemistry; Szopa, S [CEA-CNRS-UVSQ, LSCE; Thompson, R [CEA-CNRS-UVSQ, LSCE; Verkerk, P [European Forest Institute; Vuichard, N [CEA-CNRS-UVSQ, LSCE; Wang, R [Peking University; Wattenbach, M [Helmholtz Centre Potsdam GFZ German Research Centre For Geosciences; Zaehle, S [Max Planck Institute for Biogeochemistry

2012-01-01T23:59:59.000Z

246

Inland capture fisheries  

Science Journals Connector (OSTI)

...synthesis and critical review. International water management institute...Report No.15, Colombo, Sri Lanka, 45pp. Nguyen Khoa...Valdimarsson, G. 2003 International fish trade. Presentation...the expert consultation on international fish trade and food security...

2010-01-01T23:59:59.000Z

247

Cogeneration handbook for the petroleum refining industry. [Contains glossary  

SciTech Connect (OSTI)

The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the petroleum refining industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

Fassbender, L.L.; Garrett-Price, B.A.; Moore, N.L.; Fassbender, A.G.; Eakin, D.E.; Gorges, H.A.

1984-03-01T23:59:59.000Z

248

Nanosized molecular sieves as petroleum refining and petrochemical catalysts  

Science Journals Connector (OSTI)

Abstract Nanosized ZSM-5 was synthesized and used for straight run gasoline reforming. Nanosized ? was synthesized and used for the alkylation of benzene and ethylene in ethylbenzene production. Nanosized titanosilicate molecular sieve with a hollow structure (HTS) was synthesized and used for the oximation of cyclohexanone. Nanosized silicalite-1 was synthesized and used for the gas phase Beckmann rearrangement of cyclohexanone oxime in caprolactam production. Recent progress in the synthesis and application of nanosized ZSM-5, ?, TS-1, and silicalite-1 were reviewed. The catalyst lifetimes were prolonged when nanosized molecular sieves were used as petroleum refining and petrochemical catalysts.

Xuhong MU; Dianzhong WANG; Yongrui WANG; Min LIN; Shibiao CHENG; Xingtian SHU

2013-01-01T23:59:59.000Z

249

Photo-Disintegration of Silver and Aluminum  

Science Journals Connector (OSTI)

The energy and angular distributions of protons emitted from Ag and Al nuclei when irradiated with the x-rays from a 22-Mev betatron were determined with the use of photographic nuclear emulsions. A maximum x-ray energy of 20.8 Mev was used with Ag and energies of 20.8, 17.1, and 13.9 Mev with Al.With silver the number of neutrons emitted in the same irradiation was determined from the (?,n) induced activity. The ratio of numbers of protons in each Mev interval to the total number of neutrons is compared to the same ratio calculated on the basis of various assumptions as to level density and nuclear reaction cross sections. The comparison suggests that the observed proton spectrum consists of two overlapping components. One is a lower energy group in rough quantitative agreement as to spectrum shape and numbers with calculations from reasonable assumptions as to statistical-model level densities and other nuclear parameters. The second group is a high energy tail (10-14 Mev) of protons definitely outside of the spectrum expected from the statistical model. Moreover, only the high energy group shows angular asymmetry with a preference for emission at 90 to the x-ray beam, which supports the hypothesis that these protons are emitted before the excitation energy is statistically distributed in the nucleus.The ratio of total numbers of protons to neutrons emitted by Ag under 20.8-Mev bremsstrahlung radiation is 0.0230.008.With Al protons are emitted with spherical symmetry and with a yield, for quanta above about 14 Mev, as large or larger than the (?,n) yield determined by Hirzel and Wffler at 17.6 Mev. The shape of the spectrum and the ratio of (?,p) to (?,n) cross sections are compatible with the assumption of a constant or slowly increasing level density in the residual nucleus, as expected for a light nucleus in the energy range involved. From the maximum energy of emitted protons the proton threshold was determined to be 8.60.5 Mev.For use with the theoretical calculation of the proton spectra, the (?,n) cross sections as a function of x-ray quantum energy were determined for Ag107,109, Al27, and also for Cu63. The cross section of Ag109 was found to have a maximum of 0.3210-24 cm2 at 16.5 Mev, Cu63 a maximum of 0.1010-24 cm2 at 17.5 Mev. For Al27 the cross section is still rising at 22 Mev.

B. C. Diven and G. M. Almy

1950-11-01T23:59:59.000Z

250

Colored and Functional Silver Nanoparticle?Wool Fiber Composites  

Science Journals Connector (OSTI)

CIE L*, a*, and b* Values and 457 nm Brightness of Merino Wools Colored by Silver Nanoparticles ... This shows the presence of some oxidized nitrogen in the base merino wool, which probably arises from the wool scouring and pretreatment processes that the wool has been subjected to prior to us receiving it. ...

Fern M. Kelly; James H. Johnston

2011-03-07T23:59:59.000Z

251

SHORT COMMUNICATION An In Situ Silver Cationization Method  

E-Print Network [OSTI]

desorption of perflu- orinated polyethers (PFPEs), and used a second laser to ablate a plume of metal ions the forma- tion of metal ion adducts by mixing metal salts into the matrix they used to perform SIMS [5 from the sample substrate to form metal cation adducts [7]. Kahr and Wilkins used a layer of silver

de Vries, Mattanjah S.

252

EES 111: Earth Science and the Silver Screen  

E-Print Network [OSTI]

EES 111: Earth Science and the Silver Screen As the global population continues to grow the environmental issues / earth science topics that serve as the platform upon which these films are created. This course intends to: - introduce students to the basic concepts of earth and environmental sciences

253

Method for extracting copper, silver and related metals  

DOE Patents [OSTI]

A process for selectively extracting precious metals such as silver and gold concurrent with copper extraction from aqueous solutions containing the same. The process utilizes tetrathiamacrocycles and high molecular weight organic acids that exhibit a synergistic relationship when complexing with certain metal ions thereby removing them from ore leach solutions.

Moyer, B.A.; McDowell, W.J.

1987-10-23T23:59:59.000Z

254

Vision Document: Its the Economy Stupid Team Silver  

E-Print Network [OSTI]

Vision Document: Its the Economy Stupid Team Silver 1 Vision The current economic crisis has is swinging by three hundred points in a day, how can small time investors be expected to keep track of it all unfortunate investors, see below). For the small time investor who needs to keep track of realtime market data

Gamble, R. F.

255

Highly Stable Silver Nanoplates for Surface Plasmon Resonance Biosensing  

SciTech Connect (OSTI)

An SPR biosensor was developed by employing highly stable Au-protected Ag nanoplates (NP) as enhancers (see picture). Superior performance was achieved by depositing a thin and uniform coating of Au on the Ag surface while minimizing disruptive galvanic replacement and retaining the strong surface plasmon resonance (SPR) of the silver nanoplates.

Gao, Chuanbo [University of California, Riverside; Lu, Zhenda [University of California, Riverside; Chi, Miaofang [ORNL; Liu, ying [University of California, Riverside; Cheng, Quan [University of California, Riverside; Yin, Yadong [University of California, Riverside

2012-01-01T23:59:59.000Z

256

Process Refinements - Reporting of Public Use of Diesel Fuel  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Based on FHWA's reassessment of the reporting and attribution process and on the GAO study, several specific issues were identified. These issues were published in a Federal Register notice for public response.3 Sixteen States provided comments on the issues provided in the Federal Register. Two additional issues were also raised by commenters. The comments may be found at http://dmses.dot.gov; search for docket number FHWA-2000-7635. All of the issues are discussed below. Certain process refinements are required to address these issues; these changes are explained in the following sections. Based on FHWA's reassessment of the reporting and attribution process and on the GAO study, several specific issues were identified. These issues were published in a Federal Register notice for public response.3 Sixteen States provided comments on the issues provided in the Federal Register. Two additional issues were also raised by commenters. The comments may be found at http://dmses.dot.gov; search for docket number FHWA-2000-7635. All of the issues are discussed below. Certain process refinements are required to address these issues; these changes are explained in the following sections. Some of the issues concern the data reported by the States. Because of differences in State laws, States collect different types of data. Chapter 2 of A Guide to Reporting Highway Statistics4 provides instructions for completing Forms FHWA-551M and FHWA-556.

257

Investigation of tapered silver / silver halide coated hollow glass waveguides for the transmission of CO2 laser radiation  

E-Print Network [OSTI]

of CO2 laser radiation Carlos M. Bledt*a , Daniel V. Kopp a , and James A. Harrington a a Dept Graduate School of Biomedical Engineering, Tohoku University, Sendai 980-8579, Japan Jason M. Kriesel c c focuses on the theoretical and practical infrared radiation propagation properties of tapered silver

258

Influence of Alloy and Solidification Parameters on Grain Refinement in Aluminum Weld Metal due to Inoculation  

SciTech Connect (OSTI)

The goals are: (1) Establish how much Ti/B grain refiner is need to completely refine aluminum weld metal for different alloys and different welding conditions; (2) Characterize how alloy composition and solidification parameters affect weld metal grain refinement; and (3) Apply relevant theory to understand observed behavior. Conclusions are: (1) additions of Ti/B grain refiner to weld metal in Alloys 1050, 5083, and 6082 resulted in significant grain refinement; (2) grain refinement was more effective in GTAW than LBW, resulting in finer grains at lower Ti content - reason is limited time available for equiaxed grain growth in LBW (inability to occlude columnar grain growth); (3) welding travel speed did not markedly affect grain size within GTAW and LBW clusters; and (4) application of Hunt CET analysis showed experimental G to be on the order of the critical G{sub CET}; G{sub CET} was consistently higher for GTAW than for LBW.

Schempp, Philipp [BAM, Germany; Tang, Z. [BIAS, Germany; Cross, Carl E. [Los Alamos National Laboratory; Seefeld, T. [BIAS, Germany; Pittner, A. [BAM, Germany; Rethmeier, M. [BAM, Germany

2012-06-28T23:59:59.000Z

259

Impact of Environmental Compliance Costs on U.S. Refining Profitability 1995-2001  

Reports and Publications (EIA)

This report assesses the effects of pollution abatement requirements on the financial performance of U.S. petroleum refining and marketing operations during the 1995 to 2001 period. This study is a follow-up to the October 1997 publication entitled The Impact of Environmental Compliance Costs on U.S. Refining Profitability, that focused on the financial impacts of U.S. refining pollution abatement investment requirements in the 1988 to1995 period.

2003-01-01T23:59:59.000Z

260

Linkages between the markets for crude oil and the markets for refined products  

SciTech Connect (OSTI)

To understand the crude oil price determination process it is necessary to extend the analysis beyond the markets for petroleum. Crude oil prices are determined in two closely related markets: the markets for crude oil and the markets for refined products. An econometric-linear programming model was developed to capture the linkages between the markets for crude oil and refined products. In the LP refiners maximize profits given crude oil supplies, refining capacities, and prices of refined products. The objective function is profit maximization net of crude oil prices. The shadow price on crude oil gives the netback price. Refined product prices are obtained from the econometric models. The model covers the free world divided in five regions. The model is used to analyze the impacts on the markets of policies that affect crude oil supplies, the demands for refined products, and the refining industry. For each scenario analyzed the demand for crude oil is derived from the equilibrium conditions in the markets for products. The demand curve is confronted with a supply curve which maximizes revenues providing an equilibrium solution for both crude oil and product markets. The model also captures crude oil price differentials by quality. The results show that the demands for crude oil are different across regions due to the structure of the refining industries and the characteristics of the demands for refined products. Changes in the demands for products have a larger impact on the markets than changes in the refining industry. Since markets for refined products and crude oil are interrelated they can't be analyzed individually if an accurate and complete assessment of a policy is to be made. Changes in only one product market in one region affect the other product markets and the prices of crude oil.

Didziulis, V.S.

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Environmental Regulations and Changes in Petroleum Refining Operations  

Gasoline and Diesel Fuel Update (EIA)

Environmental Regulations and Environmental Regulations and Changes in Petroleum Refining Operations By Tancred C.M. Lidderdale Contents * Introduction * Motor Gasoline Summer Volatility (RVP) Regulations o Table 1. Summer Volatility Regulations for Motor Gasoline o Table 2. Refinery Inputs and Production of Normal Butane o Figure 1. Refinery Inputs and Production of Normal Butane o Table 3. Price Relationship Between Normal Butane and Motor Gasoline o Table 4. Market Price Premium for Low Vapor Pressure (RVP) Gasoline * Oxygenate Content of Motor Gasoline o Figure 2. Oxygenate Content of Motor Gasoline o Table 5. Oxygenated and Conventional Motor Gasoline Price Relationship o Table 6. Reformulated and Conventional Motor Gasoline Price Relationship o Figure 3. Price Differences Between RFG or MTBE and Conventional Gasoline

262

Curved mesh generation and mesh refinement using Lagrangian solid mechanics  

SciTech Connect (OSTI)

We propose a method for generating well-shaped curved unstructured meshes using a nonlinear elasticity analogy. The geometry of the domain to be meshed is represented as an elastic solid. The undeformed geometry is the initial mesh of linear triangular or tetrahedral elements. The external loading results from prescribing a boundary displacement to be that of the curved geometry, and the final configuration is determined by solving for the equilibrium configuration. The deformations are represented using piecewise polynomials within each element of the original mesh. When the mesh is sufficiently fine to resolve the solid deformation, this method guarantees non-intersecting elements even for highly distorted or anisotropic initial meshes. We describe the method and the solution procedures, and we show a number of examples of two and three dimensional simplex meshes with curved boundaries. We also demonstrate how to use the technique for local refinement of non-curved meshes in the presence of curved boundaries.

Persson, P.-O.; Peraire, J.

2008-12-31T23:59:59.000Z

263

New extraction-based re-refining process saves money  

SciTech Connect (OSTI)

A novel re-refining process uses solvent extraction and distillation to process used oil at lower cost and much smaller volumes than existing technology will allow. Current technology typically requires minimum processing volumes of 40,000 gpd for economically viable operation. The new process, developed by Interline Resources Corp., Alpine, Utah, can operate economically on volumes as small as 5,000 gpd. The new process has eliminated the need for thin-film evaporators, as well as the very expensive hydrofinishing step. The elimination of this capital-intensive equipment is made possible by the patented Mellon Process. In this process, the water, additives, and solids are removed at ambient conditions, thus allowing the resulting oil to be handled in traditional distillation equipment. The paper describes the process, yields, costs, and operating experience of the commercial-scale re-refinery at Draper, Utah.

Not Available

1994-05-30T23:59:59.000Z

264

Global refining beyond the year 2000 - A European perspective  

SciTech Connect (OSTI)

A new French publication from Editions Technip contains a broad-based discussion on the economic and processing parameters that will shape the refinery of the future. Process experts from Institut Francais Du Petrole (IFP) have constructed a {open_quotes}road map{close_quotes} for refining and petrochemical flow schemes that should interest industry planners and decision makers throughout the world. The importance attributed to the characterization of crude oils and petroleum products is stressed. On a directional basis, the industry will see more emphasis on methodologies to improve existing conversion and separation processes. Buzzwords such as biorefining, refinery integrated information systems, petrochemical/refinery integration and many others will find a forum in future publications.

Gonzalez, R.G. [ed.

1996-01-01T23:59:59.000Z

265

Table 3a. Imported Refiner Acquisition Cost of Crude Oil, Projected...  

U.S. Energy Information Administration (EIA) Indexed Site

a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual" "Projected Price in Constant Dollars" " constant dollars per barrel in ""dollar year"" specific to each...

266

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

AdministrationPetroleum Marketing Annual 1998 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) -...

267

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

AdministrationPetroleum Marketing Annual 1999 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) -...

268

Quantitative Methods for Strategic and Investment Planning in the Oil-Refining  

E-Print Network [OSTI]

by one refinery Refinery Opera*onal Planning - Simulate the Refining Scenarios Supply Chain Investments Planning - Test the refinery best scenarios

Grossmann, Ignacio E.

269

Table A2. Refiner/Reseller Prices of Aviation Fuels, Propane...  

Gasoline and Diesel Fuel Update (EIA)

Marketing Annual 1995 467 Table A2. RefinerReseller Prices of Aviation Fuels, Propane, and Kerosene, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) -...

270

Table A2. Refiner/Reseller Prices of Aviation Fuels, Propane...  

Gasoline and Diesel Fuel Update (EIA)

Marketing Annual 1999 421 Table A2. RefinerReseller Prices of Aviation Fuels, Propane, and Kerosene, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) -...

271

E-Print Network 3.0 - adaptive grid refinement Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of .004, the adaptive algorithm automatically generates 5 refined grids. One grid patch... and more elsewhere, would clearly be optimal. In this talk, we describe a method of...

272

Table A1. Refiner/Reseller Motor Gasoline Prices by Grade, PAD...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AdministrationPetroleum Marketing Annual 1999 401 Table A1. RefinerReseller Motor Gasoline Prices by Grade, PAD District and State, 1984-Present (Cents per Gallon Excluding...

273

Village of Silver Springs, New York (Utility Company) | Open Energy  

Open Energy Info (EERE)

Silver Springs Silver Springs Place New York Utility Id 17186 Utility Location Yes Ownership M NERC Location NPCC NERC NPCC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Demand Metered Commercial General Non-Demand Commercial Private Outdoor Lighting (1000 Wattage) Lighting Private Outdoor Lighting (175 Wattage) Lighting Residential Residential Street Lighting Lighting Average Rates Residential: $0.0691/kWh Commercial: $0.0587/kWh Industrial: $0.0449/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from

274

Silver Creek Farms Aquaculture Low Temperature Geothermal Facility | Open  

Open Energy Info (EERE)

Creek Farms Aquaculture Low Temperature Geothermal Facility Creek Farms Aquaculture Low Temperature Geothermal Facility Jump to: navigation, search Name Silver Creek Farms Aquaculture Low Temperature Geothermal Facility Facility Silver Creek Farms Sector Geothermal energy Type Aquaculture Location Twin Falls, Idaho Coordinates 42.5629668°, -114.4608711° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

275

Silver Peak, Nevada: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Peak, Nevada: Energy Resources Peak, Nevada: Energy Resources (Redirected from Silver Peak, NV) Jump to: navigation, search Name Silver Peak, Nevada Equivalent URI DBpedia GeoNames ID 5512346 Coordinates 37.7549309°, -117.6348148° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.7549309,"lon":-117.6348148,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

276

Simulation of soil water dynamics and rice crop growth as affected by bunding and fertilizer application in inland valley systems of West Africa  

Science Journals Connector (OSTI)

Rice production in rainfed inland systems is constrained by rainfall distribution and the heterogeneity of the topography that frequently lead to runoff causing erosion and loss of nutrients especially nitrogen. The use of water-saving and nutrient management technologies such as bunding and fertilizer application could help farmers maintain soil moisture and reduce nutrient losses thereby increase rice production. This study used the crop model EPIC (Environmental Policy Integrated Climate) to assess soil water dynamics and rice crop growth as affected by bunding and fertilizer application in inland valley systems of West Africa. The model was parameterized using observed soil water characteristics and crop parameters and run against observation data collected from 2007 to 2010 in a factorial trial combining bund and fertilizer rate. Simulation of soil water condition was satisfactory for unbunded conditions with coefficients of determination (R2) from comparison between simulated and observed soil water content between 0.64 and 0.68 depending on soil depth. Depth of ponded water during the growing period was adequately predicted in three out of four years. Simulated LAI development, total aboveground biomass and grain yield compared well with field observations in unbunded plots, the MRE (mean relative error) of simulated yield was 618%. In bund plots in 2009 and 2010, the grain yield was overestimated by the model when no fertilizer was applied (MRE=45%). Although negative effect of elevated iron concentration in the rice plant reduces the model performance, it was used to indicate effective effect of iron on the growth of crop the presence of bund in very wet year. The general use of the model for rainfed rice production at a large scale requires identification of areas with iron toxicity risk.

Omonlola Nadine Worou; Thomas Gaiser; Kazuki Saito; Heiner Goldbach; Frank Ewert

2012-01-01T23:59:59.000Z

277

Spatial and temporal variation in yield of rainfed lowland rice in inland valley as affected by fertilizer application and bunding in North-West Benin  

Science Journals Connector (OSTI)

Abstract Rainfed lowlands in inland valleys present a high potential for rice (Oryza spp.) production in West Africa. However, rice yield in the lowlands is, in general, low due to various constraints such as poor soil fertility, drought, iron (Fe) toxicity, and poor crop management practices. The objective of this study was to evaluate the efficiency of bunding and fertilizer application for improving rice productivity in the two toposequential positions (upslope and downslope positions) in an inland valley. The experiment was conducted in a researcher-managed on-farm trial located in the North West of Benin Republic over four wet seasons (20072010). In addition to the toposequential positions, the experiment included two treatments: (1) fertilizer inputs: no fertilizer and fertilizer (60kgN and 40kgPha?1) and (2) water control: with and without bunds (without drainage). Effect of bunding on rice yield was consistent across four seasons, two fertilizer application treatments, and two toposequential positions, and bunding increased rice yield by 29%. Rice yield was higher in upslope than in downslope, except for 2010. In upslope, high ponded water level in 2010, due to higher rainfall than in other years, increased Fe toxicity, resulting in lower yield in 2010. Year-to-year variation in yield response to fertilizer application was related to differences in N uptake at 38 days after sowing. When Fe concentration in leaves was lower, N uptake was higher. Thus, Fe toxicity at early stage could contribute to yield response to fertilizer application. These results indicate that while bunding is essential for improving rice productivity, improving yield response to fertilizer application requires drainage systems in the areas where risk for Fe toxicity is high.

Omonlola Nadine Worou; Thomas Gaiser; Kazuki Saito; Heiner Goldbach; Frank Ewert

2013-01-01T23:59:59.000Z

278

Northern pike bycatch in an inland commercial hoop net fishery: effects of water temperature and net tending frequency on injury, physiology, and survival  

SciTech Connect (OSTI)

In lakes and rivers of eastern Ontario (Canada) commercial fishers use hoop nets to target a variety of fishes, but incidentally capture non-target (i.e., bycatch) gamefish species such as northern pike (Esox lucius). Little is known about the consequences of bycatch in inland commercial fisheries, making it difficult to identify regulatory options. Regulations that limit fishing during warmer periods and that require frequent net tending have been proposed as possible strategies to reduce bycatch mortality. Using northern pike as a model, we conducted experiments during two thermal periods (mid-April: 14.45 0.32 C, and late May: 17.17 0.08 C) where fish were retained in nets for 2 d and 6 d. A 0 d control group consisted of northern pike that were angled, immediately sampled and released. We evaluated injury, physiological status and mortality after the prescribed net retention period and for the surviving fish used radio telemetry with manual tracking to monitor delayed post-release mortality. Our experiments revealed that injury levels, in-net mortality, and post-release mortality tended to increase with net set duration and at higher temperatures. Pike exhibited signs of chronic stress and starvation following retention, particularly at higher temperatures. Total mortality rates were negligible for the 2 d holding period at 14 C, 14% for 6 d holding at 14 C, 21% for 2 d holding at 17 C, and 58% for 6 d holding at 17 C. No mortality was observed in control fish. Collectively, these data reveal that frequent net tending, particularly at warmer temperatures, may be useful for conserving gamefish populations captured as bycatch in inland hoop net fisheries.

Colotelo, Alison HA; Raby, Graham D.; Hasler, Caleb T.; Haxton, Tim; Smokorowski, Karen; Blouin-Demers, Gabriel; Cooke, Steven J.

2013-01-01T23:59:59.000Z

279

Recycle of iodine-loaded silver mordenite by hydrogen reduction  

SciTech Connect (OSTI)

In 1977 and 1978, workers at Idaho National Engineering Laboratory (INEL) developed and tested a process for the regeneration and reuse of silver mordenite, AgZ, used to trap iodine from the dissolver off-gas stream of a nuclear fuel reprocessing plant. We were requested by the Airborne Waste Management Program Office of the Department of Energy to perform a confirmatory recycle study using repeated loadings at about 150/sup 0/C with elemental iodine, each followed by a drying step at 300/sup 0/C, then by iodine removal using elemental hydrogen at 500/sup 0/C. The results of our study show that AgZ can be recycled. There was considerable difficulty in stripping the iodine at 500/sup 0/C.; however, this step went reasonably well at 550/sup 0/C or slightly higher, with no apparent loss in the iodine-loading capacity of the AgZ. Large releases of elemental iodine occurred during the drying stage and the early part of the stripping stage. Lead zeolite, which was employed in the original design to trap the HI produced, is ineffective in removal of I/sub 2/. The process needs modification to handle the iodine. Severe corrosion of the stainless steel components of the system resulted from the HI-I/sub 2/-H/sub 2/O mixture. Monel or other halogen-resistant materials need to be examined for this application. Because of difficulty with the stripping stage and with corrosion, the experiments were terminated after 12 cycles. Thus, the maximum lifetime (cycles) of recycle AgZ has not been determined. Mechanistic studies of iodine retention by silver zeolites and of the behavior of silver atoms on the reduction stage would be of assistance in optimizing silver mordenite recycle.

Burger, L.L.; Scheele, R.D.

1982-11-01T23:59:59.000Z

280

Lithium silver chromate cell: a five-year story  

SciTech Connect (OSTI)

A French produced lithium silver chromate cell was first introduced in 1973 and has been used ever since as a pacemaker power source. Today, more than 370,000 cells have been produced. In five years of use, no battery-related failure has been observed in the field, giving to this system the high degree of reliability, required by this application. During this period, a study of the electrochemical aspects was maintained allowing better understanding of cell behavior. 5 refs.

Lenfant, P.; Broussely, M.; Rivault, J.P.; Grimm, M.

1980-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Advanced ultraviolet-resistant silver mirrors for use in solar reflectors  

DOE Patents [OSTI]

A silver mirror construction that maintains a high percentage of hemispherical reflectance throughout the UV and visible spectrum when used in solar reflectors, comprising:a) a pressure sensitive adhesive layer positioned beneath a silver overlay;b) a polymer film disposed on the silver overlay;c) an adhesive layer positioned on the polymer film; andd) a UV screening acrylic film disposed on the adhesive layer.

Jorgensen, Gary J. (Pine, CO); Gee, Randy (Arvada, CO)

2009-11-03T23:59:59.000Z

282

A silver staining technique for investigating wear of restorative dental composites  

SciTech Connect (OSTI)

A silver staining technique was developed to demonstrate microdefects in dental restorative composites. Fine silver particles were preferentially introduced into the damaged region to provide optical contrast between the damaged and the undamaged regions. The amount of silver deposition determined with an electron probe microanalyzer, provided an indication of the extent of damage within the dental composites. Examples to demonstrate this technique were given with one clinically worn dental composite restoration and one in vitro worn composite sample.

Wu, W.; Cobb, E.N.

1981-05-01T23:59:59.000Z

283

Pressure Temperature Log At Silver Peak Area (DOE GTP) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Pressure Temperature Log At Silver Peak Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Silver Peak Area (DOE GTP) Exploration Activity Details Location Silver Peak Area Exploration Technique Pressure Temperature Log Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Pressure_Temperature_Log_At_Silver_Peak_Area_(DOE_GTP)&oldid=511053" Categories: Exploration Activities

284

E-Print Network 3.0 - acute silver toxicity Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Membrane of Rainbow Trout Gills Summary: that are the primary site for acute heavy metal toxicity (Mc- Donald and Wood, 1993). The toxic action of silver... and chloride...

285

Detection and speciation of silver in freshwater containing triclosan and thyroid hormone T3.  

E-Print Network [OSTI]

??In freshwater, there is more opportunity for silver (Ag) to interact with organic ligands than in seawater. Triclosan is an antibiotic agent which resembles thyroid (more)

Collins, Patricia Lillian

2010-01-01T23:59:59.000Z

286

Emission-angle-dependent photoluminescence of rubrene thin films on silver  

Science Journals Connector (OSTI)

Rubrene layers with thickness comparable to a visible light wavelength on silver thin film exhibit anomalous photoluminescence (PL) spectra that depend strongly on emission angle. The...

Wakamatsu, Takashi

2014-01-01T23:59:59.000Z

287

Optical Properties of Functional Composite Silver Nanoparticles and Their Potential Use in Reproductive Medicine  

Science Journals Connector (OSTI)

Silver nanoparticles are promising product of nanotechnology with attractive physicochemical and biological properties. The main aim of the study was to investigate optical properties...

Syrvatka, Vasyl J; Slyvchuk, Yurij I; Rozgoni, Ivan I; Gevkan, Ivan I; Bilyy , Oleksandr I

288

Mag Lab Affiliate Receives 2010 Silver Medal for Physics/Materials...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mag Lab Affiliate Receives 2010 Silver Medal for PhysicsMaterials Science Print Version Email story February 17, 2010 Media Contact: Naresh Dalal, (850) 644-3398...

289

Radiative Decay Engineering of Direct Bandgap Emission in Silver Ion-Implanted Polarized Silicon Quantum Dots  

Science Journals Connector (OSTI)

Emission from low energy Silver ion implanted crystalline silicon quantum dots can be enhanced due to enhanced radiative recombination induced by polarization of the dots and metal...

Singh, Akhilesh; Gryczynski, Karol; Neogi, Arup; Kim, Moon

290

Durable silver mirror with ultra-violet thru far infra-red reflection  

DOE Patents [OSTI]

A durable highly reflective silver mirror characterized by high reflectance in a broad spectral range of about 300 nm in the UV to the far infrared (.about.10000 nm), as well as exceptional environmental durability. A high absorptivity metal underlayer is used which prevents the formation of a galvanic cell with a silver layer while increasing the reflectance of the silver layer. Environmentally durable overcoat layers are provided to enhance mechanical and chemical durability and protect the silver layer from corrosion and tarnishing, for use in a wide variety of surroundings or climates, including harsh or extreme environments.

Wolfe, Jesse D. (Discovery Bay, CA)

2010-11-23T23:59:59.000Z

291

SILVER--2003 68.1 References that include a section mark () are found in the Internet  

E-Print Network [OSTI]

reduction in byproduct silver generated at copper mines. Downtime at Kennecott Utah Copper Corp.'s Bingham Canyon Mine reduced productio

292

Thermal-induced nonlinear optical characteristics of ethanol solution doped with silver nanoparticles  

Science Journals Connector (OSTI)

The investigation of nonlinear optical characteristics of ethanol solution doped with silver nanoparticles is presented. A large thermal-induced third-order nonlinear refractive...

Mao, Zhengle; Qiao, Lingling; He, Fei; Liao, Yang; Wang, Chen; Cheng, Ya

2009-01-01T23:59:59.000Z

293

To appear in EPTCS. A CSP account of Event-B refinement  

E-Print Network [OSTI]

To appear in EPTCS. A CSP account of Event-B refinement Steve Schneider Department of Computing a CSP account of Event-B refinement, with a treatment for the first time of splitting events and of anticipated events. To this end, we define a CSP seman- tics for Event-B and show how the different forms

Doran, Simon J.

294

FDR3 --A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong,  

E-Print Network [OSTI]

FDR3 -- A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong, Alexandre.roscoe}@cs.ox.ac.uk Abstract. FDR3 is a complete rewrite of the CSP refinement checker FDR2, incorporating a significant number describe the new algorithm that FDR3 uses to construct its in- ternal representation of CSP processes

Oxford, University of

295

FDR3 --A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong,  

E-Print Network [OSTI]

FDR3 -- A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong, Alexandre.roscoe}@cs.ox.ac.uk Abstract. FDR3 is a complete rewrite of the CSP refinement checker FDR2, incorporating a significant number describe the new algorithm that FDR3 uses to construct its internal representation of CSP processes

Oxford, University of

296

Ego-Motion Estimation and 3D Model Refinement in Scenes with Varying Illumination  

E-Print Network [OSTI]

-motion and refining and updating a coarse depth map using surface parallax and a generalized dynamic im- age (GDI (DEM), we first estimate the ego-motion by combining a global ego-motion constraint and a local GDI field and the GDI model parameters locally and use them to refine the depth map estimates. We use

Agrawal, Amit

297

Effects of wastewater from an oil-sand-refining operation on survival, hematology, gill histology,  

E-Print Network [OSTI]

Effects of wastewater from an oil-sand-refining operation on survival, hematology, gill histology the effects of various types of wastewater produced in oil-sand-refining on the survival, hematology, gill. In con- trast, all fish did not survive a 28-day period in any of the wastewaters tested and, in some

Farrell, Anthony P.

298

Aspects of Western Refining, Inc.'s Proposed Acquisition of Giant Industries, Inc.  

Reports and Publications (EIA)

Presentation of company-level, non-proprietary data and relevant aggregate data for U.S. refinery capacity and gasoline marketing of Western Refining and Giant Industries to inform discussions of Western Refining Inc.'s proposed acquisition of Giant Industries Inc. for a total of $1.5 billion, which was announced August 28, 2006.

2006-01-01T23:59:59.000Z

299

Refiner options for converting and utilizing heavy fuel oil  

SciTech Connect (OSTI)

Ongoing advances in established technologies, together with recent commercial applications of residue fluid catalytic cracking (RFCC), automated residue demetallization, solvent deasphalting and gasification of pitch and coke, have markedly enhanced options for processing and economically using residues. Key long-term driving forces for processing strategies are: the need for flexibility to handle heavy, high-metals crude oils, and the economic benefit of being able to convert low-value residues to high-value light transportation fuels, hydrogen and electric power. Narrowing light/heavy crude oil price differentials and relatively low crude oil price levels since the early 1990s until the first quarter of 1996 have slowed the addition of new bottom-of-the-barrel conversion projects over the past two years. At the same time, world crude oil demand has increased at an annual average rate of nearly one million barrels/day (MMbpd) since 1985. Some major producer/refining companies forecast this rate of increase to continue well into the next decade. The inevitable net result will be the increased production of heavier crude oils. The authors project that this will be accompanied by flat or declining markets for heavy fuel oil and a resultant need for additional residue conversion/utilization capacity. The paper discusses technology application and status, economic observations, and technology outlook.

Dickenson, R.L.; Biasca, F.E.; Schulman, B.L.; Johnson, H.E. [SFA Pacific, Inc., Mountain View, CA (United States)

1997-02-01T23:59:59.000Z

300

Emission in the 5080- region from highly ionized silver in Princeton Large Torus tokamak plasmas  

Science Journals Connector (OSTI)

The spectrum of silver emitted by Princeton Large Torus tokamak plasmas has been recorded in the 25150- region by a multichannel time-resolving grazing-incidence spectrometer. Silver...

Schwob, J L; Finkenthal, M; Wouters, A; Suckewer, S; Cohen, S A

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Advanced Manufacture of Second-Surface, Silvered Glass Reflectors for High-Performance, Low-Cost CSP Collector Systems  

Broader source: Energy.gov [DOE]

Advanced Manufacture of Second-Surface, Silvered Glass Reflectors for High-Performance, Low-Cost CSP Collector Systems

302

CdS nanoparticles in porous silicate glasses: energy characteristics, photocatalytic activity, and the effect of silver ion doping  

Science Journals Connector (OSTI)

Energy diagrams were constructed for CdS nanoparticles doped with silver ions and incorporated into silicate...

A. I. Kryukov; N. P. Smirnova; A. V. Korzhak

303

SELF-ASSEMBLED DNA NANOSTRUCTURES AND DNA-TEMPLATED SILVER NANOWIRES  

E-Print Network [OSTI]

helix bundles, and the cross-tiles as well as synthetic double-stranded DNA moleculesSELF-ASSEMBLED DNA NANOSTRUCTURES AND DNA-TEMPLATED SILVER NANOWIRES by Sung Ha Park Department;ABSTRACT SELF-ASSEMBLED DNA NANOSTRUCTURES AND DNA-TEMPLATED SILVER NANOWIRES by Sung Ha Park Department

Reif, John H.

304

Letters to Analytical Chemistry Silver Nanoparticles on a Plastic Platform for  

E-Print Network [OSTI]

Letters to Analytical Chemistry Silver Nanoparticles on a Plastic Platform for Localized Surface on plastics is described. The silver-nanopar- ticles-on-plastic sensor (SNOPS) was fabricated by chemi- cally modifying the surface of a common plastic, polyeth- yleneterephthalate

Brolo, Alexandre G.

305

A Porous Ceramic Tablet Embedded with Silver Nanopatches for Low-Cost Point-of-Use Water Purification  

Science Journals Connector (OSTI)

This work describes a novel method to embed silver in ceramic porous media in the form of metallic silver nanopatches. This method has been applied to develop a new POU technology, a silver-infused ceramic tablet that provides long-term water ...

Beeta Ehdaie; Carly Krause; James A. Smith

2014-11-11T23:59:59.000Z

306

Developing Mode-Rich Satellite Software by Refinement in Event B Alexei Iliasov, Elena Troubitsyna, Linas Laibinis, Alexander Romanovsky, Kimmo  

E-Print Network [OSTI]

an intricate mode-transition scheme. We show that re refinement in Event-B provides the engineers an intricate mode-transition scheme. We show that re refinement in Event-B provides the engineers

Newcastle upon Tyne, University of

307

Concerning the energy levels of silver in Ge-Si alloys  

SciTech Connect (OSTI)

The emission from impurity states of silver (an element of the IB subgroup) in a Ge-Si alloy, containing 18 at % Si, has been studied. The donor level of silver has been found in crystals doubly doped with gallium and silver, while its first acceptor level has been revealed in crystals doped with only silver. Single crystals were grown by pulling from a melt using a feeding rod. Doping with gallium was performed by introducing this element into the feeding rod, and silver was introduced into the crystals via diffusion. The positions of the donor and first acceptor Ag levels with respect to the top of the valence band were found by analyzing the temperature dependence of the Hall coefficient and the electroneutrality equation for the crystal: 0.06 and 0.29 eV, respectively.

Tahirov, V. I. [Baku State University (Azerbaijan); Agamaliev, Z. A. [National Academy of Sciences of Azerbaijan, Institute of Physics (Azerbaijan); Sadixova, S. R.; Guliev, A. F.; Gahramanov, N. F., E-mail: n_gakhramanov@mail.ru [Sumgait State University (Azerbaijan)

2012-03-15T23:59:59.000Z

308

Hybrid electrohydrodynamic atomization of nanostructured silver top contact for inverted organic solar cells  

Science Journals Connector (OSTI)

Abstract The present study is demonstrating the deposition of solution based nanostructured silver top electrode for inverted organic solar cells. The deposition of silver nanoparticles through hybrid electrohydrodynamic atomization (Hybrid-EHDA) is discussed in detail. The film thicknesses were varied with respect to spray times. The interface between the metal electrode and organic film was investigated using a focused ion beam analyzer. The sheet resistance of nanostructured silver film was reduced by increasing the film thickness. The lowest sheet resistance of silver film is ~0.07?/sq with a film thickness of 2.6m. The power conversion efficiency of fabricated devices was found to be influenced by the sheet resistance of silver film. The maximum power conversion efficiency (~2.44%) was observed at 0.07?/sq. Our results demonstrate that the Hybrid-EHDA will play a promising role in the fabrication of inverted organic solar cells using a solution based top electrode.

Junwoo Kim; Navaneethan Duraisamy; Taik-Min Lee; Inyoung Kim; Kyung-Hyun Choi

2014-01-01T23:59:59.000Z

309

MODIFICATION OF SURFACE AND TRIBOLOGICAL PROPERTIES OF DLC FILMS BY ADDING SILVER CONTENT  

SciTech Connect (OSTI)

The incorporation of silver into the diamond-like carbon (DLC) coatings has shown excellent potential in various applications; therefore the surface and tribological properties of silver-containing DLC thin films deserve to be investigated. In this study we have deposited silver-containing hydrogenated and hydrogen-free DLC coatings by plasma immersion ion implantation and deposition (PIII-D) methods. Atomic force microscopy (AFM) and nano-scratch tests were used to study the surface and tribological properties. The silver incorporation had only slight effects on hydrogenated DLC coatings. However, the incorporation of silver has significant effect on hydrogen-free DLC of smoothing the surface and increasing the surface energy. Those effects have been illustrated and explained in the context of experimental results.

Zhang, Hanshen S.; Endrino, Jose L.; Anders, Andre

2008-06-12T23:59:59.000Z

310

,"U.S. Aviation Gasoline Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Aviation Gasoline Refiner Sales Volumes" Aviation Gasoline Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Aviation Gasoline Refiner Sales Volumes",2,"Monthly","9/2013","1/15/1983" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refoth_c_nus_eppv_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refoth_c_nus_eppv_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

311

,"Aviation Gasoline Sales to End Users Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Aviation Gasoline Sales to End Users Refiner Sales Volumes" Aviation Gasoline Sales to End Users Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Aviation Gasoline Sales to End Users Refiner Sales Volumes",60,"Monthly","9/2013","1/15/1983" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refoth_a_eppv_vtr_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refoth_a_eppv_vtr_mgalpd_m.htm" ,"Source:","Energy Information Administration"

312

,"U.S. Sales to End Users, Total Refiner Motor Gasoline Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Users, Total Refiner Motor Gasoline Sales Volumes" Users, Total Refiner Motor Gasoline Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Products for Refiner Gasoline Volumes",1,"Monthly","9/2013","1/15/1983" ,"Data 2","by Grade",3,"Monthly","9/2013","1/15/1983" ,"Data 3","by Formulation",3,"Monthly","9/2013","1/15/1994" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refmg_d_nus_vtr_mgalpd_m.xls"

313

Influence of Aluminum Content on Grain Refinement and Strength of AZ31 Magnesium GTA Weld Metal  

SciTech Connect (OSTI)

The goal is to characterize the effect of Al content on AZ31 weld metal, the grain size and strength, and examine role of Al on grain refinement. The approach is to systematically vary the aluminum content of AZ31 weld metal, Measure average grain size in weld metal, and Measure cross-weld tensile properties and hardness. Conclusions are that: (1) increased Al content in AZ31 weld metal results in grain refinement Reason: higher undercooling during solidification; (2) weld metal grain refinement resulted in increased strength & hardness Reason: grain boundary strengthening; and (3) weld metal strength can be raised to wrought base metal levels.

Babu, N. Kishore [Singapore Institute of Manufacturing Technology; Cross, Carl E. [Los Alamos National Laboratory

2012-06-28T23:59:59.000Z

314

On Some Computations of Higher Rank Refined Donaldson-Thomas Invariants  

E-Print Network [OSTI]

We present some computations of higher rank refined Donaldson-Thomas invariants on local curve geometries, corresponding to local D6-D2-D0 or D4-D2-D0 configurations. A refined wall-crossing formula for invariants with higher D6 or D4 ranks is derived and verified to agree with the existing formulas under the unrefined limit. Using the formula, refined invariants on the $(-1,-1)$ and $(-2,0)$ local rational curve with higher D6 or D4 ranks are computed.

Wu-yen Chuang; Chien-Hsun Wang

2014-09-08T23:59:59.000Z

315

,"U.S. Residual Fuel Oil Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Refiner Sales Volumes" Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Residual Fuel Oil Refiner Sales Volumes",2,"Monthly","9/2013","1/15/1983" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refres_c_nus_eppr_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refres_c_nus_eppr_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

316

,"U.S. Motor Gasoline Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Refiner Sales Volumes" Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Motor Gasoline Refiner Sales Volumes",6,"Monthly","9/2013","1/15/1983" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refmg_c_nus_epm0_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refmg_c_nus_epm0_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

317

Table 3b. Imported Refiner Acquisition Cost of Crude Oil, Projected...  

U.S. Energy Information Administration (EIA) Indexed Site

b. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual" "Projected Price in Nominal Dollars" " nominal dollars per barrel" ,1993,1994,1995,1996,1997,1998,1999,2000...

318

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

W 839.2 135.0 1,251.9 See footnotes at end of table. 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State Energy Information Administration...

319

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

W 1,039.3 132.9 1,418.3 See footnotes at end of table. 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State Energy Information Administration...

320

An idealized molecular geometry library for refinement of poorly behaved molecular fragments with constraints  

Science Journals Connector (OSTI)

An idealized molecular geometry library has been created as a web site to be used for refinement of difficult structures with constrained fragment geometries. The library application is illustrated with a practical example.

Guzei, I.A.

2014-03-28T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Knowledge-Based B-Factor Restraints for the Refinement of Proteins  

Science Journals Connector (OSTI)

The current practice of restraining all B factors equal to their bonded neighbors is reviewed. A restraint is proposed that uses the patterns of B factors of low-resolution refinements.

Tronrud, D.E.

1996-04-01T23:59:59.000Z

322

Surface selective removal of xylan from refined never-dried birch kraft pulp  

Science Journals Connector (OSTI)

In this study, the effect of enzyme treatment on refined, never-dried bleached birch kraft pulp was investigated, using an endo-1,4-?-xylanase, that is substantially free from cellulase activity. The xylanase tre...

Esa Saukkonen; Katja Lyytikinen; Pavel Geydt; Kaj Backfolk

2014-10-01T23:59:59.000Z

323

Steam System Opportunity Assessment for the Pulp and Paper, Chemical Manufacturing, and Petroleum Refining Industries  

Broader source: Energy.gov [DOE]

This report assesses steam generation and use in the pulp and paper, chemical manufacturing, and the petroleum refining industries. The report also estimates the energy savings potential available from implementing steam system performance and efficiency improvements.

324

Validation and refinement of gene-regulatory pathways on a network of physical interactions  

E-Print Network [OSTI]

As genome-scale measurements lead to increasingly complex models of gene regulation, systematic approaches are needed to validate and refine these models. Towards this goal, we describe an automated procedure for prioritizing ...

Yeang, Chen-Hsiang, 1969-

325

Specification, Refinement and Verification of Concurrent SystemsAn Integration of Object-Z and CSP  

Science Journals Connector (OSTI)

This paper presents a method of formally specifying, refining and verifying concurrent systems which uses the object-oriented state-based specification language Object-Z together with the process algebra CSP. Obj...

Graeme Smith; John Derrick

2001-05-01T23:59:59.000Z

326

Table A2. Refiner/Reseller Prices of Aviation Fuels, Propane...  

Gasoline and Diesel Fuel Update (EIA)

- W 73.5 See footnotes at end of table. A2. RefinerReseller Prices of Aviation Fuels, Propane, and Kerosene, by PAD District, 1983-Present Energy Information Administration ...

327

FIA-15-0002- In the Matter of Alon Refining Krotz Springs, Inc.  

Broader source: Energy.gov [DOE]

This Decision concerns an Appeal that Alon Refining Krotz Springs, Inc. (Alon) filed in response to a determination that was issued to it by the Department of Energys (DOE) Office of Information...

328

Using a conformation-dependent stereochemical library improves crystallographic refinement of proteins  

SciTech Connect (OSTI)

The major macromolecular crystallographic refinement packages restrain models to ideal geometry targets defined as single values that are independent of molecular conformation. However, ultrahigh-resolution X-ray models of proteins are not consistent with this concept of ideality and have been used to develop a library of ideal main-chain bond lengths and angles that are parameterized by the {phi}/{psi} angle of the residue [Berkholz et al. (2009), Structure, 17, 1316-1325]. Here, it is first shown that the new conformation-dependent library does not suffer from poor agreement with ultrahigh-resolution structures, whereas current libraries have this problem. Using the TNT refinement package, it is then shown that protein structure refinement using this conformation-dependent library results in models that have much better agreement with library values of bond angles with little change in the R values. These tests support the value of revising refinement software to account for this new paradigm.

Tronrud, Dale E.; Berkholz, Donald S.; Karplus, P. Andrew (Oregon State U.)

2010-07-02T23:59:59.000Z

329

Table A1. Refiner/Reseller Motor Gasoline Prices by Grade, PAD...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

78.2 101.8 83.6 87.5 74.7 See footnotes at end of table. A1. RefinerReseller Motor Gasoline Prices by Grade, PAD District, and State, 1984-Present 452 Energy Information...

330

Improving catalysts for the refining of straight-run gasoline fractions of petroleum  

Science Journals Connector (OSTI)

We propose a method for modifying catalysts based on a high-silica zeolite of the ZSM-5 type using Ni nanopowder to improve catalysts for the refining of straight-run gasoline fractions. The proposed method, whic...

E. V. Urzhumova; L. M. Velichkina; A. V. Vosmerikov; A. E. Ermakov

2011-06-01T23:59:59.000Z

331

Combustion Emissions from Refining Lower Quality Oil: What Is the Global Warming Potential?  

Science Journals Connector (OSTI)

Refinery crude feed, processing, yield, and fuel data from four regions accounting for 97% of U.S. refining capacity from 1999 to 2008 were compared among regions and years for effects on processing and energy consumption predicted by the processing characteristics of heavier, higher sulfur oils. ... Estimates that construct process-by-process allocations of emissions among these factors have not been verified by observations from operating refineries in part because publicly reported data are limited for refinery-specific crude feeds and unavailable for process-level material and energy inputs and outputs (4-6). ... Rough estimates including the energy, d, and S lost in bitumen upgrading for SCO refined reveal greater effects of total processing for crude feeds refined in Districts 2 and 4 and follow the relationships observed in refining (Figure 2). ...

Greg Karras

2010-11-30T23:59:59.000Z

332

Parcel Per Parcel Toward A More Refined Carbon Emissions Estimation For Livermore, CA  

E-Print Network [OSTI]

A More Refined Carbon Emissions Estimation For Livermore, CAof lifestyle on carbon emissions in the residential sector [an all-time low in carbon emissions, though most use overall

ivanovi?, Ana

2014-01-01T23:59:59.000Z

333

--No Title--  

U.S. Energy Information Administration (EIA) Indexed Site

Farm Bureau Coop Association Inergy Inland Refining International Aviation Sales Johnson Fuel Oil Kern Oil and Refining Kinder Morgan Transmix Koch Hydrocarbon Koch...

334

Energy use in cropping systems: A regional long-term exploratory analysis of energy allocation and efficiency in the Inland Pampa (Argentina)  

Science Journals Connector (OSTI)

As agricultural system comprises natural processes that are ruled by thermodynamics, the energy utilization is well suited for assessing the sustainability in the management of natural resources. The goals of this paper are 1) to assess the energy use efficiency of the main crops during the 19922005 period in Inland Pampa (Argentina); 2) to evaluate the database structure in terms of energy allocation; 3) to assess the changes in technical efficiency using frontier analysis and 4) to identify the best explanatory variables for energy efficiency variability. Results showed an upward trend in productivity per unit area in the crops analyzed (excluding sunflower). Summer soybean and sunflower showed higher energy efficiency values by the end of time series. The main shift in the energy use pattern was the reduction of the energy allocated to tillage. The overall performance of the wheat and soybean crops in the study area appears to be closer to the energy usage pattern shown by the top 5% energy use efficiency crop fields. The exploratory analysis using classification and regression trees (CART) revealed that the energy allocation to tillage; and the crop specie were the attributes that mainly explained the energy efficiency changes.

Diego Omar Ferraro

2012-01-01T23:59:59.000Z

335

Cost-Effective Mapping of Benthic Habitats in Inland Reservoirs through Split-Beam Sonar, Indicator Kriging, and Historical Geologic Data  

SciTech Connect (OSTI)

Because bottom substrate composition is an important control on the temporal and spatial location of the aquatic community, accurate maps of benthic habitats of inland lakes and reservoirs provide valuable information to managers, recreational users, and scientists. Therefore, we collected vertical, split-beam sonar data (roughness [E1], hardness [E2], and bathymetry) and sediment samples to make such maps. Statistical calibration between sonar parameters and sediment classes was problematic because the E1:E2 ratios for soft (muck and clay) sediments overlapped a lower and narrower range for hard (gravel) substrates. Thus, we used indicator kriging (IK) to map the probability that unsampled locations did not contain coarse sediments. To overcome the calibration issue we tested proxies for the natural processes and anthropogenic history of the reservoir as potential predictive variables. Of these, a geologic map proved to be the most useful. The central alluvial valley and mudflats contained mainly muck and organic-rich clays. The surrounding glacial till and shale bedrock uplands contained mainly poorly sorted gravels. Anomalies in the sonar data suggested that the organic-rich sediments also contained trapped gases, presenting additional interpretive issues for the mapping. We extended the capability of inexpensive split-beam sonar units through the incorporation of historic geologic maps and other records as well as validation with dredge samples. Through the integration of information from multiple data sets, were able to objectively identify bottom substrate and provide reservoir users with an accurate map of available benthic habitat.

Venteris, Erik R.; May, Cassandra

2014-04-23T23:59:59.000Z

336

EASURING IMPROVEMENT IN THE ENERGY PERFORMANCE OF THE U.S. CORN REFINING INDUSTRY  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

| P | P a g e MEASURING IMPROVEMENT IN THE ENERGY PERFORMANCE OF THE U.S. CORN REFINING INDUSTRY SPONSORED BY THE U.S. ENVIRONMENTAL PROTECTION AGENCY AS PART OF THE ENERGY STAR® PROGRAM GALE A. BOYD AND CHRISTIAN DELGADO DUKE UNIVERSITY DEPARTMENT OF ECONOMICS BOX 90097, DURHAM, NC 27708 JULY 10, 2012 2 | P a g e MEASURING IMPROVEMENT IN THE ENERGY PERFORMANCE OF THE U.S. CORN REFINING INDUSTRY CONTENTS Figures .................................................................................................................................................................................................................. 3 Tables ................................................................................................................................................................................................................... 3

337

Microsoft PowerPoint - genealogy of major US refiners (00 to 09).ppt  

U.S. Energy Information Administration (EIA) Indexed Site

Of Major U.S. Refiners Of Major U.S. Refiners 2001 2004 2005 2006 2000 2002 Diamond Shamrock Ultramar j 6/01 12/01 9/97 12/96 Total North America Valero Salomon (Basis) Huntway Valero Valero Ultramar Diamond Shamrock (UDS) UDS 5/97 Notes, footnotes, and source notes are at the bottom of these figures. 2003 Clark Refining g 9/05 Valero Valero 3/98 Mapco Williams Williams Companies d 3/03 d Premcor h 1/89 4/00 12/98 BP America BP Amoco ARCO BP America SOHIO BP America b Sun Company Sunoco r 1/04 o El Paso 1/01 Pacific Refining (jv) Coastal Orion Valero 7/03 6/01 o El Paso 12/88 n 2007 2008 2009 BP-Husky Refining LLC (jv) Husky 7/07 i 4/08 c 10/98 l 8/94 q 9/89 p 12/88 a 7/94 e 12/98 f 6/00 m 9/00 k 5/04 g Holly 6/03 s 6/09 t 12/09 u Holly Genealogy Of Major U.S. Refiners (continued) 2001 2004 2005 2006 2000 2002 2003 2007 2008 2009 1/98 USX (Marathon) 10/98 y Ashland Marathon Lyondell

338

Biogenic silver nanoparticles synthesised from Zingiber officinale and its antifungal properties  

Science Journals Connector (OSTI)

A silver particle at the nanoscale level behaves as an effective antimicrobial agent and offers numerous applications in biosensing and medicine. The current study unveils the effect of rhizome of Zingiber officinale and its silver nanoparticles against the growth and hydrolytic enzyme of two lethal moulds, Alternaria alternata and Curvularia lunata. The rhizome of Zingiber officinale was extracted under aseptic conditions to get cold distilled water and silver nanoparticle extracts in order to check the effect on inhibition of cell mass formation and protease activity of Curvularia lunata and Alternaria alternata. The formation of silver nanoparticles was confirmed by UV-Vis absorption spectroscopy and scanning electron microscopy. The obtained results showed that the highest tested concentration (2%) of Zingiber officinale in cold distilled water and silver nanoparticle extracts strongly inhibited the cell mass formation as well as protease activity in test organisms. The silver nanoparticle extract showed potent antifungal activity when compared to cold distilled water extract. The study unravels the antifungal property of Zingiber officinale and its biogenically synthesised silver nanoparticles that can be exploited further for therapeutical and other industrial applications.

Malini Soundararajan; Neha Deora; Lynette Lincoln; Purandhi Roopmani; Shikha Gupta; Rajatha Shambu

2014-01-01T23:59:59.000Z

339

Kinetic Monte Carlo (KMC) simulation of fission product silver transport through TRISO fuel particle  

Science Journals Connector (OSTI)

A mesoscale kinetic Monte Carlo (KMC) model developed to investigate the diffusion of silver through the pyrolytic carbon and silicon carbide containment layers of a TRISO fuel particle is described. The release of radioactive silver from TRISO particles has been studied for nearly three decades, yet the mechanisms governing silver transport are not fully understood. This model atomically resolves Ag, but provides a mesoscale medium of carbon and silicon carbide, which can include a variety of defects including grain boundaries, reflective interfaces, cracks, and radiation-induced cavities that can either accelerate silver diffusion or slow diffusion by acting as traps for silver. The key input parameters to the model (diffusion coefficients, trap binding energies, interface characteristics) are determined from available experimental data, or parametrically varied, until more precise values become available from lower length scale modeling or experiment. The predicted results, in terms of the time/temperature dependence of silver release during post-irradiation annealing and the variability of silver release from particle to particle have been compared to available experimental data from the German HTR Fuel Program (Gontard and Nabielek [1]) and Minato and co-workers (Minato et al. [2]).

G. Mric de Bellefon; B.D. Wirth

2011-01-01T23:59:59.000Z

340

A review of "Imperfect Sense: The Predicament of Miltons Irony." by Victoria Silver  

E-Print Network [OSTI]

on the subject of Milton?s God. Silver?s introductory chapter addresses the uneasy re- sponses readers have had to Milton?s attempt to ?justify the ways of God to men.? Here, she discusses William Empson, whose Milton?s God she acknowledges as a seminal... will for an eternal tyranny? (43). In her second chapter, ?Milton?s God,? Silver outlines the ?peculiar hiddenness of the reformers? God? as a vehicle both to explain her notion of Milton?s two Gods and to propose ?a solu- tion? to the ?strangely kindred conflicts...

David V. Urban

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Silver Peak, Nevada: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Peak, Nevada: Energy Resources Peak, Nevada: Energy Resources Jump to: navigation, search Name Silver Peak, Nevada Equivalent URI DBpedia GeoNames ID 5512346 Coordinates 37.7549309°, -117.6348148° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.7549309,"lon":-117.6348148,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

342

Efficient incorporation of silver to improve superconducting fibers  

DOE Patents [OSTI]

An improved method for the efficient incorporation of a metal such as silver in a superconducting material includes blending the metal with a high temperature superconductor or precursor powder and consolidating the same into pellets. The pellets are charged directly into a heating assembly where it is melted and heated sufficiently to a uniform temperature prior to fiberization. Droplets of the melted blend fall through a collar into a nozzle where they are subjected to a high velocity gas to break the melted material into ligaments which solidify into improved flexible fibers having the metal homogeneously dis This invention was made with Government support under a contract with the Department of Energy (DOE) and Ames Laboratory, Contract No. SC-91-225, our reference No. CRD-1272. The Government has certain rights in this invention.

Gleixner, Richard A. (North Canton, OH); LaCount, Dale F. (Alliance, OH); Finnemore, Douglas K. (Ames, IA)

1994-04-26T23:59:59.000Z

343

Microsoft Word - CX-Silver_Butte_28August2012.docx  

Broader source: Energy.gov (indexed) [DOE]

August 28, 2012 August 28, 2012 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Frank Weintraub Project Manager - TEP-TPP-1 Proposed Action: Silver Butte Fiber Burial Project Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B.47 Fiber Optic Cable. Location: Kootenai National Forest, Lincoln and Sanders County, Montana Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to bury an approximately 1-mile-long overhead fiber optic line (fiber) segment located along the Noxon-Libby transmission line. Under the Proposed Action, the fiber would be buried within the BPA right-of-way (ROW) and a U.S. Forest Service (USFS) access road. Past snow and ice loading along the segment has resulted in

344

Iodine Loading of NO Aged Silver Exchanged Mordenite  

SciTech Connect (OSTI)

In an off-gas treatment system for used nuclear fuel processing, a solid sorbent will typically be exposed to a gas stream for months at a time. This gas stream may be at elevated temperature and could contain water vapor, gaseous nitrogen oxides (NO{sub x}), nitric acid vapors, and a variety of other constituents. For this reason, it is important to evaluate the effects of long-term exposure, or aging, on proposed sorbents. Silver exchanged mordenite (AgZ) is being studied at Oak Ridge National Laboratory (ORNL) to determine its iodine sorption capacity after long term exposure to increasingly more complex chemical environments. Studies previously conducted at ORNL investigated the effects of aging reduced silver exchanged mordenite (Ag{sup 0}Z) in dry air, moist air, and NO2. This study investigated the effects of extended exposure to nitric oxide (NO) gas on the iodine capture performance of Ag{sup 0}Z. A deep bed of Ag{sup 0}Z was aged in a 1% nitric oxide (NO) air stream, and portions of the bed were removed at pre-determined intervals. After being removed from the NO stream, each sample was loaded with iodine in a thin bed configuration. These samples were analyzed by neutron activation analysis (NAA) to quantify the iodine content in the sample. Samples were removed at one week and one month. A 78% decrease in sample capacity was seen after one week of exposure, with no further decrease observed after 1 month of aging. The observed loss in capacity is larger in magnitude than previous studies exposing Ag{sup 0}Z to dry air, moist air, or NO2 gas. The aging study was terminated after one month and repeated; this successfully demonstrated the reproducibility of the results.

Patton, K. K. [ORNL; Bruffey, S. H. [ORNL; Jubin, J. T. [ORNL; Walker, Jr., J. F. [ORNL

2014-09-30T23:59:59.000Z

345

Testimony of Jonathan Silver, Executive Director Loan Programs Office, U.S.  

Broader source: Energy.gov (indexed) [DOE]

Testimony of Jonathan Silver, Executive Director Loan Programs Testimony of Jonathan Silver, Executive Director Loan Programs Office, U.S. Department of Energy Before the Subcommittee on Oversight and Investigations Committee on Energy and Commerce U.S. House of Representatives Testimony of Jonathan Silver, Executive Director Loan Programs Office, U.S. Department of Energy Before the Subcommittee on Oversight and Investigations Committee on Energy and Commerce U.S. House of Representatives September 14, 2011 - 12:01am Addthis As prepared for delivery Thank you Chairman Stearns, Ranking Member DeGette, and members of the Subcommittee. My name is Jonathan Silver, and I have served as Executive Director of the Loan Programs Office at the Department of Energy since November 2009. For most of my career, I have worked in the private sector, analyzing,

346

Enhancement of Raman Scattering for Silver Nanoparticles Located on Electrolessly Roughened Silicon  

Science Journals Connector (OSTI)

To study the effect of roughness of a supporting substrate to Raman enhancement, silver nanoparticles (AgNPs) were prepared on Si with different degrees of roughness. To roughen the...

Liou, Yen-Chen Maggie; Chen, Jiann-Yeu; Yang, Jyisy

2014-01-01T23:59:59.000Z

347

Parameters of free-burning arc discharge plasma in air with silver-based electrodes  

Science Journals Connector (OSTI)

We have used optical spectroscopy to study the radial temperature profiles for an electric arc plasma between silver electrodes and electrodes made ... . We established that the parameters of the arc discharge pl...

I. L. Babich; A. N. Veklich; L. A. Kryachko

2006-05-01T23:59:59.000Z

348

Communication: CO oxidation by silver and gold cluster cations: Identification of different active oxygen species  

SciTech Connect (OSTI)

The oxidation of carbon monoxide with nitrous oxide on mass-selected Au{sub 3}{sup +} and Ag{sub 3}{sup +} clusters has been investigated under multicollision conditions in an octopole ion trap experiment. The comparative study reveals that for both gold and silver cations carbon dioxide is formed on the clusters. However, whereas in the case of Au{sub 3}{sup +} the cluster itself acts as reactive species that facilitates the formation of CO{sub 2} from N{sub 2}O and CO, for silver the oxidized clusters Ag{sub 3}O{sub x}{sup +} (n= 1-3) are identified as active in the CO oxidation reaction. Thus, in the case of the silver cluster cations N{sub 2}O is dissociated and one oxygen atom is suggested to directly react with CO, whereas a second kind of oxygen strongly bound to silver is acting as a substrate for the reaction.

Popolan, Denisia M.; Bernhardt, Thorsten M. [Institute of Surface Chemistry and Catalysis, University of Ulm, Albert-Einstein-Allee 47, 89069 Ulm (Germany)

2011-03-07T23:59:59.000Z

349

Experimental observation of silver and gold penetration into dental ceramic by means of a radiotracer technique  

SciTech Connect (OSTI)

A radiotracer technique was used to study silver and gold diffusion into dental porcelain under experimental conditions close to the real conditions in prosthetic laboratories for porcelain bakes. It was clearly shown that these non-oxidizable elements were able to diffuse into the ceramic as well as oxidizable ones. The penetration depth varied widely according to the element. The ratio DAg/DAu was about 10(3) around 850 degrees C. In contrast to gold, the silver diffusion rate was high enough to allow silver, from the metallic alloy, to be present at the external ceramic surface after diffusion into the ceramic. Hence, the greening of dental porcelains baked on silver-rich alloys could be explained mainly by a solid-state diffusion mechanism.

Moya, F.; Payan, J.; Bernardini, J.; Moya, E.G.

1987-12-01T23:59:59.000Z

350

Photoionization spectra of silver dimers adsorbed on the surface of a ZnS single crystal  

Science Journals Connector (OSTI)

We use the photostimulated luminescence flash method to measure photoionization spectra of Ag2 clusters adsorbed on the surface of a ZnS single crystal. Adsorbed dimers of silver are prepared by treatment of the ...

O. V. Ovchinnikov; D. A. Minakov; M. S. Smirnov

2007-07-01T23:59:59.000Z

351

Re-refining of waste mineral insulating oil by extraction with N-methyl-2-pyrrolidone  

Science Journals Connector (OSTI)

Extraction with N-methyl-2-pyrrolidone (NMP) via the three-stage mixersettler operation was studied as possible process for re-refining of waste mineral insulating oil. The following extraction process parameters were investigated systematically in order to determine their optimum values: amount of water as co-solvent in NMP, extraction temperature and solvent/oil ratio. The process parameters and resulting oil chemical compositions were found to influence the electrical properties and the oxidation stability of the re-refined oil. The levels of aromatic, paraffinic and polycyclic aromatic hydrocarbons were determined using IR spectroscopy and HPLC, while other relevant chemical and electrical properties of waste and re-refined oil were determined according to IEC, ISO and ASTM standards. Extraction using NMP was found to be an adequate method for waste mineral insulating oil re-refining, according to the application properties of the re-refined oil. Moderate extraction temperature, 1% water in NMP and a low solvent/oil ratio (0.5) were determined to be the optimum process parameters.

Jelena Luki?; Aleksandar Orlovi?; Michael Spiteller; Jovan Jovanovi?; Dejan Skala

2006-01-01T23:59:59.000Z

352

Calorimetric studies of oxygen adsorption on silver powder and of CO and CO/sub 2/ interactions with preadsorbed oxygen on silver  

SciTech Connect (OSTI)

The initial rapid oxygen adsorption on powdered silver ethylene oxidation catalyst had a heat of adsorption that decreased from 70 to 40 kcal/mole as the adsorbed amount increased from 2 to 20 jmole/sq m. The rapid oxygen adsorption covered about one-fourth of the silver surface. Carbon monoxide adsorbed on the oxygen-covered silver with an initial heat of adsorption of 90 kcal/mole which decreased after 0.6 jmole/sq m CO were adsorbed and was approx. 70 kcal/mole at 2 jmole/sq m CO. Carbon dioxide adsorbed on the oxygen-covered surface with 38 kcal/mole heat of adsorption that was independent of coverage. The adsorption study provided evidence for the formation of adsorbed carbonate (CO/sub 3/) surface complexes.

Vass, M.I.; Budrugeac, P.

1980-07-01T23:59:59.000Z

353

Measurements of the diffusion coefficient of silver 110-m in a nuclear grade graphite  

E-Print Network [OSTI]

MEASUREMENTS OF TEE DIFFUSION COEFFICIENT OF SILVER 110-m IN A NUCLEAR GRADE. GRAPHITE A Thesis by THAD CALHOUN MCMILLAN, Jr. Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree... of MASTER OF SCIENCE August 1980 Major Subject: Nuclear Engineering MEASUREMENTS OF THE DIFFUSION COEFFICIENT OF SILVER 110-m IN A NUCLEAR GRADE GRAPHITE A Thesis by THAD CALHOUN MCMILLAN, Jr. Approved as to style and content by: (Chairman...

McMillan, Thad Calhoun

2012-06-07T23:59:59.000Z

354

Staining of in vivo subsurface degradation in dental composites with silver nitrate  

SciTech Connect (OSTI)

A previously reported technique for staining areas of degradation in dental composite restorations was evaluated in 51 removed restorations. The staining reagent was silver nitrate, which penetrated the degraded subsurface as ionic silver and was subsequently developed into colored deposits of metallic silver. Several artefacts were recognized that resulted in an apparent image of subsurface stain. Most importantly, the presence of a layer of adsorbed silver on the edge of the specimen exaggerated the extent of staining. In order for the true depth of stain to be determined, thin sections of the materials should first be examined with a stereomicroscope to distinguish any contribution from adsorbed silver on the specimen edge. With this regimen, no stain was present in 41% of the restorations, and in a further 30%, the depth of stain was less than 50 microns. In two composites, the depth of stain was greater than 900 microns, and in a number of specimens, localized stain was found in association with attrition scars. Energy-dispersive x-ray analysis indicated that the amount of silver present in the degraded layers was very small. Overall, the results indicated that the staining technique is useful in the study of composite degradation.

Mair, L.H. (Univ. of Liverpool (England))

1991-03-01T23:59:59.000Z

355

Fewer Steps to Higher Octane Gasoline in Petroleum Refining | U.S. DOE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fewer Steps to Higher Octane Gasoline in Petroleum Refining Fewer Steps to Higher Octane Gasoline in Petroleum Refining Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory Committee (BESAC) News & Resources Contact Information Basic Energy Sciences U.S. Department of Energy SC-22/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3081 F: (301) 903-6594 E: sc.bes@science.doe.gov More Information » July 2013 Fewer Steps to Higher Octane Gasoline in Petroleum Refining A novel metal-organic framework (MOF) efficiently separates higher octane components from the low value ones, offering great potential for significant cost reduction in gasoline production. Print Text Size: A A A Subscribe FeedbackShare Page

356

,"Conventional Gasoline Sales to End Users, Total Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Conventional Gasoline Sales to End Users, Total Refiner Sales Volumes" Conventional Gasoline Sales to End Users, Total Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Conventional Gasoline Sales to End Users, Total Refiner Sales Volumes",60,"Monthly","9/2013","1/15/1994" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refmg_a_epm0u_vtr_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refmg_a_epm0u_vtr_mgalpd_m.htm" ,"Source:","Energy Information Administration"

357

,"U.S. Reformulated Gasoline Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Reformulated Gasoline Refiner Sales Volumes" Reformulated Gasoline Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Reformulated Gasoline Refiner Sales Volumes",6,"Monthly","9/2013","1/15/1994" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refmg_c_nus_epm0r_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refmg_c_nus_epm0r_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

358

DOE - Office of Legacy Management -- National Smelting and Refining Co - OH  

Office of Legacy Management (LM)

Smelting and Refining Co - Smelting and Refining Co - OH 20 FUSRAP Considered Sites Site: NATIONAL SMELTING & REFINING CO. (OH.20) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: 6800 Grand Avenue , Cleveland , Ohio OH.20-1 Evaluation Year: 1993 OH.20-2 Site Operations: No indication of other test operations using very limited quantities of slag material. OH.20-1 Site Disposition: Eliminated - Potential for contamination considered remote based upon limited scope of activities at the site OH.20-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium - No Indication of Anything But Trace Amounts Handled OH.20-1 Radiological Survey(s): None Indicated Site Status: Eliminated from consideration under FUSRAP

359

New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants |  

Broader source: Energy.gov (indexed) [DOE]

New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants January 31, 2012 - 2:09pm Addthis The Electric Power Research Institute (EPRI), the U.S. Department of Energy (DOE), and the U.S. Nuclear Regulatory Commission (NRC) released a new seismic study today that will help U.S. nuclear facilities in the central and eastern United States reassess seismic hazards. The Central and Eastern United States Seismic Source Characterization for Nuclear Facilities model and report is the culmination of a four-year effort among the participating organizations and replaces previous seismic source models used by industry and government since the late 1980s. The NRC is requesting U.S. nuclear power plants to reevaluate seismic

360

,"U.S. Conventional, Average Refiner Gasoline Prices"  

U.S. Energy Information Administration (EIA) Indexed Site

Conventional, Average Refiner Gasoline Prices" Conventional, Average Refiner Gasoline Prices" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Conventional, Average Refiner Gasoline Prices",6,"Monthly","9/2013","1/15/1994" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_pri_refmg2_c_nus_epm0u_dpgal_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_pri_refmg2_c_nus_epm0u_dpgal_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

,"U.S. Reformulated, Average Refiner Gasoline Prices"  

U.S. Energy Information Administration (EIA) Indexed Site

Reformulated, Average Refiner Gasoline Prices" Reformulated, Average Refiner Gasoline Prices" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Reformulated, Average Refiner Gasoline Prices",6,"Monthly","9/2013","1/15/1994" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_pri_refmg2_c_nus_epm0r_dpgal_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_pri_refmg2_c_nus_epm0r_dpgal_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

362

,"Motor Gasoline Sales to End Users, Total Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Users, Total Refiner Sales Volumes" Users, Total Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Motor Gasoline Sales to End Users, Total Refiner Sales Volumes",60,"Monthly","9/2013","1/15/1983" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refmg_a_epm0_vtr_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refmg_a_epm0_vtr_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

363

,"No. 2 Distillate Sales to End Users Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Sales to End Users Refiner Sales Volumes" Sales to End Users Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","No. 2 Distillate Sales to End Users Refiner Sales Volumes",60,"Monthly","9/2013","1/15/1983" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refoth_a_epd2_vtr_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refoth_a_epd2_vtr_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

364

The Impact of Environmental Compliance Costs on U.S. Refining Profitability  

Gasoline and Diesel Fuel Update (EIA)

The Impact of Environmental Compliance Costs on U.S. Refining Profitability October 1997 Energy Information Administration Office of Energy Markets and End Use U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. Energy Information Administration/The Impact of Environmental Compliance Costs on U.S. Refining Profitability ii Contacts The Impact of Environmental Compliance Costs on U.S. Refining Profitability was prepared in the Office of Energy Markets and End Use of the Energy Information Administration, U.S. Department of Energy under the general direction of W. Calvin

365

Overview of Eulerian Methods and Block Adaptive Mesh Refinement Techniques at Sandia  

National Nuclear Security Administration (NNSA)

Crawford, D.A. et al. 1 Crawford, D.A. et al. 1 Overview of Eulerian Methods and Block Adaptive Mesh Refinement Techniques at Sandia D. A. Crawford* and D. M. Hensinger* * Sandia National Laboratories, Albuquerque, New Mexico, USA. Multi-material shock-physics Eulerian codes have undergone several generations of refinement in as many decades at Sandia. The widely used code, CTH, can trace its lineage to the one- and two-dimensional codes CHARTD and CSQ. An adaptive mesh refinement (AMR) strategy has been implemented in CTH, providing improved performance and memory utilization and evidence of improved scaling for large problems. The ALE (Arbitrary Lagrangian Eulerian) code ALEGRA combines the multi- material shock physics capabilities found in CTH with a finite element

366

Closed-loop study of the effects of multicycle re-refining of automotive lubricating oil  

SciTech Connect (OSTI)

Twenty-five gallons of a hydrofinished virgin lubricating oil basestock was blended with additives into a 10W30 crankcase oil. After the engines had been pruged with a flush oil, 11 vehicles were charged with the blended virgin oil. Mileages ranging from 2000 to over 3000 miles of use were accumulated before the oil was drained, re-refined and recharged to the vehicles. This cycle was repeated until the oil had been re-refined three times. At each stage, detailed analyses and compound characterizations were performed on both the oil being recycled and on the same oil which was re-refined but never charged to vehicles. The data showed no significant change in the composition of the base oil, except for a minor buildup of additive base oil, which was expected.

Reynolds, J.W.; Goetzinger, J.W.; Cotton, F.O.; Brinkman, D.W.; Whisman, M.L.

1982-03-01T23:59:59.000Z

367

Refined Glauber model versus Faddeev calculations and experimental data for pd spin observables  

SciTech Connect (OSTI)

Spin-dependent observables in intermediate-energy pd elastic scattering within the framework of the refined Glauber model are considered. The improvements include an account of all ten pp and pn helicity amplitudes at respective energies constructed on the basis of modern phase-shift analysis, accurate deuteron wave functions taken from the modern NN force model and account of charge-exchange effects. Predictions of the refined diffraction model for differential cross section and analyzing powers are compared with exact three-body Faddeev calculations and the recent experimental data. An amazingly good agreement between the results of both theoretical approaches as well as between the refined Glauber model and experiment in a wide angular range not only for differential cross section but also for vector and tensor analyzing powers has been found for the first time. Possible reasons for this agreement are discussed.

Platonova, M. N.; Kukulin, V. I. [D.V. Skobeltsyn Institute of Nuclear Physics, M.V. Lomonosov Moscow State University, Moscow RU-119991 (Russian Federation)

2010-01-15T23:59:59.000Z

368

New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants |  

Broader source: Energy.gov (indexed) [DOE]

New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants January 31, 2012 - 2:09pm Addthis The Electric Power Research Institute (EPRI), the U.S. Department of Energy (DOE), and the U.S. Nuclear Regulatory Commission (NRC) released a new seismic study today that will help U.S. nuclear facilities in the central and eastern United States reassess seismic hazards. The Central and Eastern United States Seismic Source Characterization for Nuclear Facilities model and report is the culmination of a four-year effort among the participating organizations and replaces previous seismic source models used by industry and government since the late 1980s. The NRC is requesting U.S. nuclear power plants to reevaluate seismic

369

,"Residual Fuel Oil Sales to End Users Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Sales to End Users Refiner Sales Volumes" Sales to End Users Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Residual Fuel Oil Sales to End Users Refiner Sales Volumes",9,"Monthly","9/2013","1/15/1983" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refres_a_eppr_vtr_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refres_a_eppr_vtr_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

370

,"Kerosene-Type Jet Fuel Sales to End Users Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Kerosene-Type Jet Fuel Sales to End Users Refiner Sales Volumes" Kerosene-Type Jet Fuel Sales to End Users Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Kerosene-Type Jet Fuel Sales to End Users Refiner Sales Volumes",60,"Monthly","9/2013","1/15/1983" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refoth_a_epjk_vtr_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refoth_a_epjk_vtr_mgalpd_m.htm" ,"Source:","Energy Information Administration"

371

,"U.S. Conventional Gasoline Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Conventional Gasoline Refiner Sales Volumes" Conventional Gasoline Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Conventional Gasoline Refiner Sales Volumes",6,"Monthly","9/2013","1/15/1994" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refmg_c_nus_epm0u_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refmg_c_nus_epm0u_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

372

,"No. 2 Diesel Fuel Sales to End Users Refiner Sales Volumes"  

U.S. Energy Information Administration (EIA) Indexed Site

Sales to End Users Refiner Sales Volumes" Sales to End Users Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","No. 2 Diesel Fuel Sales to End Users Refiner Sales Volumes",60,"Monthly","9/2013","1/15/1994" ,"Release Date:","12/2/2013" ,"Next Release Date:","1/2/2014" ,"Excel File Name:","pet_cons_refoth_a_epd2d_vtr_mgalpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_refoth_a_epd2d_vtr_mgalpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov"

373

Cavity QED implementation of the multi-qubit refined Deutsch-Jozsa algorithm  

E-Print Network [OSTI]

We theoretically study the realization of a multi-qubit refined Deutsch-Jozsa (DJ) algorithm using resonant interaction of many Rydberg atoms with a single-mode microwave cavity, in which the multi-qubit controlled phase gates could be accomplished efficiently. We show how to achieve a multi-qubit refined DJ algorithm in high fidelity, even in the case of a weak cavity decay and some imperfection. We argue that the required operations in our scheme are almost within the present experimental possibilities.

Wan Li Yang; Chang Yong Chen; Zhen Yu Xu; Mang Feng

2010-02-25T23:59:59.000Z

374

Liquid-liquid extraction as the means of refining cottonseed oil  

E-Print Network [OSTI]

LIBRARY A 4 AI CvLLEGE OF TEXAS LIOVID-LIQUID EXTRACTION AS THE MEANS OI REFINING CCTTONSEFZ OIL A Thesis By 1'RVUBHAI CHIINIBHAI PATEL a 0 U z A R 0 Submitted to the Graduate School of the Agricultural and Mechanical College of Texas... in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Auuust 1996 Major Subject Chemical ineeri LIQUID-LIQUID EXTRACTION AS THE MEANS OF REFINING COTTONSEED OIL A Thesis By MANUBHAI CHUNIBHAI PATEL Approved as to style...

Patel, Manubhai Chunibhai

2012-06-07T23:59:59.000Z

375

Synthesis, Characterization, and Silver Adsorption Property of Magnetic Cellulose Xanthate from Acidic Solution: Prepared by One Step and Biogenic Approach  

Science Journals Connector (OSTI)

Finally this method was applied to analyze the silver ions in tap water, dental radiology agent, and synthetic samples. ... Finally this method was applied for determination of the silver ions, in tap water, dental radiology agent, and synthetic samples. ... Finally, the MCX1 was applied for adsorption of Ag+ from dental radiology agent and synthetic samples, and the results indicate the capability of the method for selective adsorption of silver from complicated matrices. ...

Mostafa Hossein Beyki; Mehrnoosh Bayat; Simin Miri; Farzaneh Shemirani; Hassan Alijani

2014-08-27T23:59:59.000Z

376

Use of massively multiple merged data for low-resolution S-SAD phasing and refinement of flavivirus NS1  

Science Journals Connector (OSTI)

High-multiplicity data were used to solve the West Nile virus NS1 structure by S-SAD and for the extension of useable resolution for refinement.

Akey, D.L.

2014-09-27T23:59:59.000Z

377

Studies on design of a process for organo-refining of coal to obtain super clean coal  

SciTech Connect (OSTI)

Organo-refining of coal results in refining the coal to obtain super clean coal and residual coal. Super clean coal may be used to obtain value added chemicals, products, and cleaner fuels from coal. In the present work, studies on the design of a semicontinuous process for organo-refining of one ton of coal have been made. The results are reported. This is only a cursory attempt for the design, and further studies may be required for designing this process for use in the development of a scaled-up process of organo-refining of coal.

Sharma, C.S.; Sharma, D.K. [Indian Inst. of Tech., New Delhi (India). Centre for Energy Studies

1999-08-01T23:59:59.000Z

378

Evaluation of sterling silver as a contacting material for the cathode chamber of the solid-oxide fuel cell.  

E-Print Network [OSTI]

??This research focuses on the development and testing of contact paste materials for the SOFC, utilizing silver, in a simulated cathode environment. Test specimens were (more)

Sakacsi, John.

2006-01-01T23:59:59.000Z

379

Effect of geometric lattice design on optical/electrical properties of transparent silver grid for organic solar cells  

Science Journals Connector (OSTI)

Silver (Ag) grid transparent electrode is one of the most promising transparent conducting electrodes (TCEs) to replace conventional indium tin oxide (ITO). We systematically...

Lim, Ju Won; Lee, Young Tack; Pandey, Rina; Yoo, Tae-Hee; Sang, Byoung-In; Ju, Byeong-Kwon; Hwang, Do Kyung; Choi, Won Kook

2014-01-01T23:59:59.000Z

380

Aging of Iodine-Loaded Silver Mordenite in NO2  

SciTech Connect (OSTI)

Used nuclear fuel facilities need to control and minimize radioactive emissions. Off-gas systems are designed to remove radioactive contaminants, such as 85Kr, 14C, 3H, and 129I. In an off-gas system, any capture material will be exposed to a gas stream for months at a time. This gas stream may be at elevated temperature and could contain water, NOx gas, or a variety of other constituents comprising the dissolver off-gas stream in a nuclear fuel reprocessing plant. For this reason, it is important to evaluate the effects of long-term exposure, or aging, on proposed capture materials. One material under consideration is reduced silver mordenite (Ag0Z), which is recognized for its efficient iodine capture properties. Iodine is immobilized on Ag0Z as AgI, a solid with low volatility (m.p. ? 500C). The aim of this study was to determine whether extended aging at elevated temperature in a nominally 2% NO2 environment would result in a loss of immobilized iodine from this material due to either physical or chemical changes that might occur during aging. Charges of iodine-loaded reduced silver mordenite (I2-Ag0Z) were exposed to a 2% NO2 environment for 1, 2, 3, and 4 months at 150C, then analyzed for iodine losses The aging study was completed successfully. The material did not visibly change color or form. The results demonstrate that no significant iodine loss was observed over the course of 4 months of 2% NO2 aging of I2-Ag0Z at elevated temperature within the margin of error and the variability (~10%) in the loading along the beds. This provides assurance that iodine will remain immobilized on Ag0Z during extended online use in an off-gas capture treatment system. Future tests should expose I2-Ag0Z to progressively more complex feed gases in an effort to accurately replicate the conditions expected in a reprocessing facility.

Bruffey, Stephanie H. [ORNL; Jubin, Robert Thomas [ORNL; Patton, Kaara K. [ORNL; Walker Jr, Joseph Franklin [ORNL

2014-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Adaptive Mesh Refinement and Multilevel Iteration for Flow in Porous Media  

E-Print Network [OSTI]

, including support from Mobil Exploration and Production Technical Center, Dallas. 2 Supported by NSF grant; Abstract An adaptive local mesh refinement algorithm originally developed for unsteady gas dynamics are provided. #12; 1 Introduction. The numerical treatment of field­scale simulation of enhanced oil recovery

Trangenstein, John A.

382

Refined Asymptotics for the subcritical Keller-Segel system and Related Functional Inequalities  

E-Print Network [OSTI]

Refined Asymptotics for the subcritical Keller-Segel system and Related Functional Inequalities self-similarity for the subcritical Keller- Segel system in the radially symmetric two-dimensional case that the one-dimensional equation is a contraction with respect to Fourier distance in the subcritical case. 1

Paris-Sud XI, Université de

383

Error estimation and anisotropic mesh refinement for 3d laminar aerodynamic flow simulations  

E-Print Network [OSTI]

Error estimation and anisotropic mesh refinement for 3d laminar aerodynamic flow simulations Tobias Leichta,b , Ralf Hartmann,a,b aInstitute of Aerodynamics and Flow Technology, DLR (German Aerospace Center-dimensional laminar aerodynamic flow simulations. The optimal order symmetric interior penalty discontinuous Galerkin

Hartmann, Ralf

384

Refinement of weed risk assessments for biofuels using Camelina sativa as a model species  

E-Print Network [OSTI]

Refinement of weed risk assessments for biofuels using Camelina sativa as a model species Philip B and Environmental Sciences, Montana State University, PO Box 173120, Bozeman, MT 59717-3120, USA Summary 1. Biofuel. However, concerns have been raised on the invasiveness of biofuel feedstocks. Estimating invasion

Peterson, Robert K. D.

385

Techno-economic study of re-refining waste lubricating oils in the Arabian Gulf countries  

Science Journals Connector (OSTI)

Waste oil reclaimation by re-refining is a promising process for recycling valuable polutant waste. In Arabian Gulf countries, a limited volume of waste oil is recycled. A technical and economical evaluation of some reclaimation methods to produce lubricating oil has been conducted.

M.I. Al-Ahmad; I.S. Al-Mutaz

1991-01-01T23:59:59.000Z

386

Used oil re-refining: Cote d`ivoire. Final report. Export trade information  

SciTech Connect (OSTI)

The scope of work for this project was divided into two major phases of work, the Feasibility Study (FS) and the Process Design Specification (PDS). The Feasibility Study performed by Matrix Engineering, Inc. (Matrix) reviewed three solvent extraction processes, plus fractionation and adsorbent filtration, as suitable technologies for use in a used oil re-refining facility for Cote d`Ivoire.

NONE

1995-11-16T23:59:59.000Z

387

Environmental Regulations and Changes in Petroleum Refining Operations (Released in the STEO June 1998)  

Reports and Publications (EIA)

Changes in domestic refining operations are identified and related to the summer Reid vapor pressure (RVP) restrictions and oxygenate blending requirements. This analysis uses published Energy Information Administration survey data and linear regression equations from the Short-Term Integrated Forecasting System (STIFS). The STIFS model is used for producing forecasts appearing in the Short-Term Energy Outlook.

1998-01-01T23:59:59.000Z

388

Grain refinement and texture development of cast bi90sb10 alloy via severe plastic deformation  

E-Print Network [OSTI]

recrystallization and causes the development of a bimodal microstructure consisting of fine grains (5-30 micron) and coarse grains (50-300 micron). ECAE processing of homogenizied Bi-Sb alloy causes grain refinement and produces a more uniform microstructure...

Im, Jae-taek

2009-05-15T23:59:59.000Z

389

Rocky Mountain area petroleum product availability with reduced PADD IV refining capacity  

SciTech Connect (OSTI)

Studies of Rocky Mountain area petroleum product availability with reduced refining capacity in Petroleum Administration for Defense IV (PADD IV, part of the Rocky Mountain area) have been performed with the Oak Ridge National Laboratory Refinery Yield Model, a linear program which has been updated to blend gasolines to satisfy constraints on emissions of nitrogen oxides and winter toxic air pollutants. The studies do not predict refinery closures in PADD IV. Rather, the reduced refining capacities provide an analytical framework for probing the flexibility of petroleum refining and distribution for winter demand conditions in the year 2000. Industry analysts have estimated that, for worst case scenarios, 20 to 35 percent of PADD IV refining capacity could be shut-down as a result of clean air and energy tax legislation. Given these industry projections, the study scenarios provide the following conclusions: The Rocky Mountain area petroleum system would have the capability to satisfy winter product demand with PADD IV refinery capacity shut-downs in the middle of the range of industry projections, but not in the high end of the range of projections. PADD IV crude oil production can be maintained by re-routing crude released from PADD IV refinery demands to satisfy increased crude oil demands in PADDs II (Midwest), III (Gulf Coast), and Washington. Clean Air Act product quality regulations generally do not increase the difficulty of satisfying emissions reduction constraints in the scenarios.

Hadder, G.R.; Chin, S.M.

1994-02-01T23:59:59.000Z

390

OPERATOR INTERACTION WITH MODEL-BASED PREDICTIVE CONTROLLERS IN PETROCHEMICAL REFINING  

E-Print Network [OSTI]

. These differences in level may explain why we observed refinery operators asking questions of the automation not. This could also explain why we did not observe refinery operators having difficultyOPERATOR INTERACTION WITH MODEL-BASED PREDICTIVE CONTROLLERS IN PETROCHEMICAL REFINING Greg A

Virginia, University of

391

Refinement and validation of a multi-level assessment method for Mid-Atlantic tidal wetlands  

E-Print Network [OSTI]

Refinement and validation of a multi-level assessment method for Mid-Atlantic tidal wetlands (EPA of wetland resources across the Mid-Atlantic physiographic region, efforts are currently underway in a number of states, most notably Delaware, Maryland, Pennsylvania and Virginia, to develop and implement wetland

392

Silver Peak Innovative Exploration Project Geothermal Project | Open Energy  

Open Energy Info (EERE)

Innovative Exploration Project Geothermal Project Innovative Exploration Project Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Silver Peak Innovative Exploration Project Project Type / Topic 1 Recovery Act: Geothermal Technologies Program Project Type / Topic 2 Validation of Innovative Exploration Technologies Project Description The scope of this three phase project includes tasks to validate a variety of innovative exploration and drilling technologies which aim to accurately characterize the geothermal site and thereby reduce project risk. Phase 1 exploration will consist of two parts: 1) surface and near surface investigations and 2) subsurface geophysical surveys and modeling. The first part of Phase 1 includes: a hyperspectral imaging survey (to map thermal anomalies and geothermal indicator minerals), shallow temperature probe measurements, and drilling of temperature gradient wells to depths of 1000 feet. In the second part of Phase 1, 2D & 3D geophysical modeling and inversion of gravity, magnetic, and magnetotelluric datasets will be used to image the subsurface. This effort will result in the creation of a 3D model composed of structural, geological, and resistivity components. The 3D model will then be combined with the temperature data to create an integrated model that will be used to prioritize drill target locations.

393

Silver Star Hot Springs Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Hot Springs Geothermal Area Hot Springs Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Silver Star Hot Springs Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (0) 10 References Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"TERRAIN","zoom":6,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"300px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.685,"lon":-112.295,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

394

Silver Creek-Morton Transmission Project: Environmental assessment  

SciTech Connect (OSTI)

Bonneville Power Administration (BPA) will in 1989, replace the Silver Creek-Morton 69-kV transmission line with a line of 115-kV construction and, in the late 1990's, add capacitors at Morton Substation. Portions of the new line would be constructed on new right-of-way adjacent to the old 69-kV line and portions would be constructed on the same right-of-way. Construction on adjacent right-of-way would require new right-of-way up to 50 feet wide on one side of the present right-of-way. BPA would then release to private ownership right-of-way up to 50 feet wide on the opposite side, after the old line has been removed. Parts of the new line would be constructed on H-frame wood-pole sructures and parts on single wood-pole structures, depending on land use constraints. 16 refs., 3 figs., 3 tabs.

Not Available

1986-06-01T23:59:59.000Z

395

Silver doped nanobioactive glass particles for bone implant applications  

SciTech Connect (OSTI)

Silica based silver doped nanobioactive glass compositions (58SiO{sub 2}-33CaO-9P{sub 2}O{sub 5} and 58SiO{sub 2}-23CaO-9P{sub 2}O{sub 5}-10Ag{sub 2}O(mol%)) were synthesized by a simple sol-gel route. The prepared samples were comprehensively characterised by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy and scanning electron microscopic studies. The results reveal that the prepared samples have amorphous phase with spherical morphology and having a particle size less than 100 nm. The specific surface areas were 90 and 61 m{sup 2}g{sup -1} respectively. The in vitro bioactivity of glass samples were confirmed by the formation of hydroxyapatite layer on glass surfaces. The Ag{sub 2}O-doped nanobioactive glasse samples shows reveal significant antibacterial activity compare with base glasses.

Prabhu, M.; Kavitha, K.; Karunakaran, G.; Manivasakan, P.; Rajendran, V. [Centre for Nanoscience and Technology, K. S. Rangasamy College of Technology, Tiruchengode - 637215, Namakkal (DT), Tamil Nadu (India)

2013-02-05T23:59:59.000Z

396

Room temperature discharge characteristics of Li/NH4NO3?LiNO3-amide cells using silver salts as active cathode materials  

Science Journals Connector (OSTI)

The discharge characteristics of cells using lithium anodes in conjunction with nitrate-amide melt electrolytes and silver salt cathodes are presented. The use of insoluble or sparingly soluble silver salts as active

G. E. McManis; A. N. Fletcher; D. E. Bliss

1986-11-01T23:59:59.000Z

397

The effect of TMP refining using an adjustable-speed drive on energy consumption and pulp quality. [ThermoMechanical Pulp  

SciTech Connect (OSTI)

An experimental investigation was conducted to study the effect of TMP refining using adjustable-speed drive (ASD) on energy consumption and pulp quality. The project is based on the studies of disc refiner models at high- and low-consistency refining. The primary objectives is to examine the potential energy efficiency improvement of a TMP system by evaluating the effect of TMP refining using ASD in pilot scale at the Center for High Yield Pulping Science. The pilot experimental results show that certain benefits of TMP refining using ASD can be obtained. Preliminary results demonstrate that increasing the first stage of refining speed reduces electrical energy at similar pulp quality.

Su, W.; Hsieh, J. (Georgia Inst. of Technology, Atlanta, GA (United States))

1994-09-01T23:59:59.000Z

398

The Role of Neutron Activation Analysis in the Pathological Evaluation of Silver-Eluting Biomedical Devices in Biological Matrices  

E-Print Network [OSTI]

to their presence was not observed. INAA results correlated with these findings; silver was not detected adjacent to the test article, but a concentration of 74 ppm 29% of silver was observed in tissue adjacent to the control article. A complex system of ordinary...

Lancon, Trevor

2014-08-14T23:59:59.000Z

399

Efficient organic light-emitting diode using semitransparent silver as anode Huajun Peng, Xiuling Zhu, Jiaxin Sun, Zhiliang Xie, Shuang Xie,  

E-Print Network [OSTI]

Efficient organic light-emitting diode using semitransparent silver as anode Huajun Peng, Xiuling A semitransparent silver layer is investigated as the anode for organic light-emitting devices OLEDs. A bottom-emitting OLED using the modified, semitransparent silver anode, demonstrates improved current

400

Transformation of carbon monoxide dimer surface structures on yttrium oxide modified by silver  

SciTech Connect (OSTI)

It has been established that introducing ions of silver(II) in yttrium(III) oxide leads to the formation of a significant concentration of a paramagnetic dimer species (CO)/sub 2/-in the course of the adsorption of carbon monoxide, and that these dimers exhibit high thermal stability and reactivity. Reactions are proposed for the formation of the dimer species (CO)/sub 2//sup 2 -/ and (CO)/sub 2//sup -/ on the surface of the Ag/Y/sub 2/O/sub 3/ catalyst that involve the reduction of the anion vacancies and a change in the oxidation state of the silver ions. Modifying the yttrium oxide with ionic silver leads to a marked decrease in the strength of the oxidative ability of the surface of the catalyst for CO, while the nature of the active sites of the yttrium oxide, which adsorbs CO in three forms, remains unchanged.

Vydrin, S.N.; Bobolev, A.V.; Loginov, A.Yu.

1987-09-10T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Cavitation erosion of silver plated coating at different temperatures and pressures  

SciTech Connect (OSTI)

Cavitation often occurs in inducer pumps used for space rockets. Silver plated coating on the inducer liner faces the damage of cavitation. Therefore, it is important to study about the cavitation erosion resistance for silver plated coating at several operating conditions in the inducer pumps. In this study, the cavitation erosion tests were carried for silver plated coating in deionized water and ethanol at several liquid temperatures (273K400K) and pressures (0.10MPa0.48MPa). The mass loss rate is evaluated in terms of thermodynamic parameter ? proposed by Brennen [9], suppression pressure pp{sub v} (p{sub v}: saturated vapor pressure) and acoustic impedance ?c (?: density and c: sound speed). Cavitation bubble behaviors depending on the thermodynamic effect and the liquid type were observed by high speed video camera. The mass loss rate is formulated by thermodynamic parameter ?, suppression pressure pp{sub v} and acoustic impedance ?c.

Hattori, Shuji; Motoi, Yoshihiro [Graduate School of Engineering, University of Fukui, 3-9-1 Bunkyo, Fuku-shi, Fukui 910-8507 (Japan); Kikuta, Kengo; Tomaru, Hiroshi [IHI Corperation, TOYOSU IHI BUILDING, 1-1, Toyosu 3-chome, Koto-ku, Tokyo 1358710 (Japan)

2014-04-11T23:59:59.000Z

402

Behavior of silver molybdate at high-pressure  

SciTech Connect (OSTI)

Behavior of cubic spinel phase of Ag{sub 2}MoO{sub 4} is investigated at high pressure using X-ray diffraction and Raman spectroscopy. The P-V data are fitted to a third order Birch-Murnaghan equation of state using a value of B{sub 0}=113 GPa and B Prime {sub 0}=4. The compound is also found to exhibit a phase transition around 5 GPa to a tetragonal structure and the two phases are found to coexist over a range of pressures. Raman spectra exhibit dramatic changes across the phase transition. Increase of X-ray background scattering and broadening of the Raman peaks associated with MoO{sub 4} tetrahedral ions in the high pressure phase suggest evolution of positional disorder. However, no evidence of pressure-induced amorphization was found up to 47 GPa. - Graphical abstract: Evolution of the integrated intensity of all the diffraction peaks between 12 and 18 degree 2{theta} as a function of pressure. The rapid decrease of the intensity suggests evolution of positional disorder in the high-pressure tetragonal phase. Highlights: Black-Right-Pointing-Pointer First in-situ X-ray diffraction and Raman study of cubic silver molybdate at high pressure. Black-Right-Pointing-Pointer Commencement of a structural transition to a tetragonal phase is found at 2.3 GPa. Black-Right-Pointing-Pointer The high-pressure phase is found to have positional disorder. Black-Right-Pointing-Pointer A bulk modulus of 113 GPa is obtained from the equation of state.

Arora, A.K., E-mail: akarora49@yahoo.co.in [Condensed Matter Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India); Nithya, R. [Condensed Matter Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India)] [Condensed Matter Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India); Misra, Sunasira [Liquid Metals and Structural Chemistry Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India)] [Liquid Metals and Structural Chemistry Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India); Yagi, Takehiko [Institute for Solid State Physics, Tokyo University, Kashiwanoha, Kashiwa, Chiba 277-8581 (Japan)] [Institute for Solid State Physics, Tokyo University, Kashiwanoha, Kashiwa, Chiba 277-8581 (Japan)

2012-12-15T23:59:59.000Z

403

Zero-field Spin Depolarization of Low-Energy Muons in Ferromagnetic Nickel and Silver Metal  

Science Journals Connector (OSTI)

We present zero-field muon-spin depolarization measurements in nickel and silver performed using low-energy muon-spin relaxation technique.Ni or Ag are usually used in this depth-resolved technique as a backing material to enable background subtraction when studying small crystals or materials with weak magnetism. The depolarization rate of the asymmetry in silver and that of the slow relaxing part of the asymmetry in nickel are small(? 0.05?s?1), and weakly temperature and energy-dependent.

H. Saadaoui; Z. Salman; T. Prokscha; A. Suter; B.M. Wojek; E. Morenzoni

2012-01-01T23:59:59.000Z

404

Donor doping of single-walled carbon nanotubes by filling of channels with silver  

SciTech Connect (OSTI)

The channels of single-walled carbon nanotubes (SWNTs) are filled with metallic silver. The synthesized nanocomposites are studied by Raman spectroscopy and optical absorption spectroscopy, and these data indicate a substantial modification of the electronic structure of the nanotubes upon their filling. Moreover, X-ray photoelectron spectroscopy shows that the incorporation of the metal leads to a change in the work function of SWNTs due to the Fermi level upshift and to the transfer of an electron density from inserted nanoparticles to the nanotube walls. Thus, the filling of the channels with silver results in donor doping of the nanotubes.

Kharlamova, M. V., E-mail: mv.kharlamova@gmail.com [Moscow State University (Russian Federation); Niu, J. J. [Drexel University, Department of Materials Science and Engineering (United States)

2012-09-15T23:59:59.000Z

405

Biomass Refining  

Science Journals Connector (OSTI)

...little acetic or lactic acid (2). Corn stover is a promising feedstock for...with real feedstocks (3). With corn stover, inhibitory products slow...Natick workers showed that two-roll wet milling is effective and relatively inexpensive...

Henry R. Bungay

1982-11-12T23:59:59.000Z

406

Reductions in Northeast Refining Activity: Potential Implications for Petroleum Product Markets  

Gasoline and Diesel Fuel Update (EIA)

Reductions in Northeast Reductions in Northeast Refining Activity: Potential Implications for Petroleum Product Markets December 2011 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Reductions in Northeast Refining Activity: Potential Implications for Petroleum Product Markets i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as representing those of the U.S. Department of Energy

407

Table 1A","Refiner Acquisition Cost of Crude Oil by PAD District (Domestic  

U.S. Energy Information Administration (EIA) Indexed Site

A","Refiner Acquisition Cost of Crude Oil by PAD District (Domestic)" A","Refiner Acquisition Cost of Crude Oil by PAD District (Domestic)" ,"(Dollars per Barrel)" ,,," "," " ,,,"Previous ","Final" "Frequency","Date","Area","Price","Price","Difference" "Annual",2010,"PAD District 2",78.7,78.85,0.15 ,,"PAD District 4",73.65,73.56,-0.09 ,,"U.S.",77.96,78.01,0.05 ,2011,"PAD District 3",103.19,103.24,0.05 ,,"PAD District 2",96.82,96.81,-0.01 ,,"PAD District 4",89.36,89.34,-0.02 ,,"U.S.",100.74,100.71,-0.03 ,,"PAD District 5",103.85,103.83,-0.02 "Month","application/vnd.ms-excel","PAD District 4",73.68,72.66,-1.02

408

A consistent approach to large eddy simulation using adaptive mesh refinement  

SciTech Connect (OSTI)

The large eddy simulation of turbulent flows is discussed with particular attention paid to the issue of commutation of differentiation and filtering. Multi-level adaptive mesh refinement is proposed as a means of mostly avoiding commutation errors where increased grid resolution is required to capture key flow features. The strategy is to employ multiple uniform grids in a nested hierarchy using a constant-width filter for each grid. It is shown that commutivity of fine and coarse grid filters must be enforced in order to consistently relate variables at different refinement levels. Methods for treating fine grid boundaries and walls are also discussed. It is shown that errors associated with boundary treatments are small and localized.

Cook, A.W.

1999-09-01T23:59:59.000Z

409

Hydrogen transfer in transformations of olefin and thiophene compounds for the refining of gasoline fractions  

Science Journals Connector (OSTI)

Abstract Hydrogen transfer reactions in the transformations of mixtures of model hydrocarbons (hydrogen donors and acceptors) on zeolite catalysts were studied. Hydrogen donors were represented by various classes of hydrocarbons, and acceptorsby unsaturated (olefin) and thiophene compounds. The [H]-donor activity series of hydrocarbons was revealed. Strong differences in the transformation pathways of 1-hexene and 1-octene under the conditions of catalytic refining were demonstrated. A new method for the refining of low-rank gasoline fractions was proposed. The method is based on the hydrogen transfer reactions between hydrogen donor hydrocarbons and hydrogen acceptor hydrocarbons, which proceed without molecular hydrogen. The proposed method allows the simultaneous removal of sulfur (more than 95%) and unsaturated (more than 90%) compounds.

Oleg V. Potapenko; Vladimir P. Doronin; Tatyana P. Sorokina; Vladimir A. Likholobov

2014-01-01T23:59:59.000Z

410

Changing structure of the world refining industry: implications for the United States and other major consuming regions  

SciTech Connect (OSTI)

There are five chapters in this publication. Chapter I on refining industry in transition covers refining history highlights, and OPEC's downstream operations. Chapter II on demand for oil and oil products discusses supply and demand for OPEC oil, demand for oil products, historical growth trends, future growth trends and the case of East Asia - emergence of a fuel oil glut. Chapter III on the US and other traditional refining centers begins with an introduction on the structure of refining and continues on to cover the refining industry in OECD countries, USA, Western Europe, Japan, Singapore and Caribbean and closes with some conclusions. Chapter IV is on refining expansions in OPEC and the third World Nations. The following are covered: (1) nations of the Gulf (Saudi Arabia, Kuwait, Iran, Iraq, Bahrain, Qatar, Oman, United Arab Emirates); (2) OPEC members beyond the Gulf (Indonesia, Africa, Libya, Algeria, Nigeria and Gabon, South America, Venezuela); (3) other major exporters (China, Egypt, Malaysia, Mexico); (4) non-OPEC developing countries - trends in the refining sector. The chapter ends with a short summary on capacity prospects and comparative economics. The final chapter has conclusions and recommendations on: price interactions between crude and products; product exports - impact on OPEC's internal; prices and market influence; importers and exporters - decisions; and course of action of the United States. 18 figures, 40 tables.

Not Available

1985-02-01T23:59:59.000Z

411

Characterization of U-6Nb ingots produced via the electron beam cold hearth refining process  

SciTech Connect (OSTI)

A study was undertaken at Lawrence Livermore National Laboratory to characterize uranium, 6% niobium ingots produced via electron beam melting, hearth refining and continuous casting and to compare this material with conventional VIM/skull melt/VAR material. Samples of both the ingot and feed material were analyzed for niobium and trace metallic elements, carbon, oxygen and nitrogen. This material was also inspected metallographically and via microprobe analysis.

McKoon, R.H.

1997-11-14T23:59:59.000Z

412

Vacuum-induction melting, refining, and casting of uranium and its alloys  

SciTech Connect (OSTI)

The vacuum-induction melting (VIM), refining, and casting of uranium and its alloys are discussed. Emphasis is placed on historical development, VIM equipment, crucible and mold design, furnace atmospheres, melting parameters, impurity pickup, ingot quality, and economics. The VIM procedures used to produce high-purity, high-quality sound ingots at the US Department of Energy Rocky Flats Plant are discussed in detail.

Jackson, R.J.

1989-10-11T23:59:59.000Z

413

Techno-economic evaluation of waste lube oil re-refining in Saudi Arabia  

SciTech Connect (OSTI)

About 80 million gallons of automotive lubricating oils are sold in Saudi Arabia. Much of this oil, after use, is actually contributing to the increased pollution of land because of indiscriminate dumping. Any scheme of secondary use of the waste lube oils would be of interest both for conservation of energy resources and for protection of environment. This paper discusses the secondary use for the used automotive lubricating oils. Process technology of Meinken, Mohawk and KTI were selected for the techno-economic feasibility study for re-refining used oil. Profitability analysis for each process is worked out and the results are compared. In many countries, the re-refining of used oils has become an important industry. The objective of recovering high quality raffinates is attained through the use of widely differing techniques. The processes concerned can be classified according to the chemical or physical method of used-oil pretreatment selected. Meinken process is based on chemical pretreatment, whereas both Mohawk and KTI processes employ physical methods involving distillation and eliminate the use of sulfuric acid, thus providing a facility for safer operation than Meinken. The plant capacity of two existing units in Jeddah are 10,000 TPA and 80,000 TPA re-refining of waste oil. We selected a plant of 50,000 TPA waste oil re-refining for economic study of these three processes. The authors wish to acknowledge the support from King Fahd University of Petroleum & Minerals and King Abdulaziz City for Science & Technology for this work.

Ali, F.M.; Hamdan, A.J.; Rahman, F. [King Fahd Univ. of Petroleum & Minerals, Dharan (Saudi Arabia)] [and others

1995-12-31T23:59:59.000Z

414

Re-refined lubrication oils. (Latest citations from the NTIS bibliographic database). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning treatments and re-refining of used lubrication oils. Topics include the decontamination processes, reclamation of automobile oils, and handling and storage of waste oils. Environmental analyses of used oil recycling are included. Environmental, resource conservation, and economic aspects of recycled lubricating oils are also discussed. (Contains 50-250 citations and includes a subject term index and title list.)

NONE

1995-07-01T23:59:59.000Z

415

Using high-order methods on adaptively refined block-structured meshes - discretizations, interpolations, and filters.  

SciTech Connect (OSTI)

Block-structured adaptively refined meshes (SAMR) strive for efficient resolution of partial differential equations (PDEs) solved on large computational domains by clustering mesh points only where required by large gradients. Previous work has indicated that fourth-order convergence can be achieved on such meshes by using a suitable combination of high-order discretizations, interpolations, and filters and can deliver significant computational savings over conventional second-order methods at engineering error tolerances. In this paper, we explore the interactions between the errors introduced by discretizations, interpolations and filters. We develop general expressions for high-order discretizations, interpolations, and filters, in multiple dimensions, using a Fourier approach, facilitating the high-order SAMR implementation. We derive a formulation for the necessary interpolation order for given discretization and derivative orders. We also illustrate this order relationship empirically using one and two-dimensional model problems on refined meshes. We study the observed increase in accuracy with increasing interpolation order. We also examine the empirically observed order of convergence, as the effective resolution of the mesh is increased by successively adding levels of refinement, with different orders of discretization, interpolation, or filtering.

Ray, Jaideep; Lefantzi, Sophia; Najm, Habib N.; Kennedy, Christopher A.

2006-01-01T23:59:59.000Z

416

An investigation on recycling the recovered uranium from electro-refining process in a CANDU reactor  

Science Journals Connector (OSTI)

Feasibility studies for recycling the recovered uranium from electro-refining process of pyroprocessing into a Canada Deuterium Uranium (CANDU) reactor have been carried out with a source term analysis code ORIGEN-S, a reactor lattice analysis code WIMS-AECL, and a Monte Carlo analysis code MCNPX. The uranium metal can be recovered in a solid cathode during an electro-refining process and has a form of a dendrite phase with about 99.99% expecting recovery purity. Considering some impurities of transuranic (TRU) elements and fission products in the recovered uranium, sensitivity calculations were also performed for the compositions of impurities. For a typical spent PWR fuel of 3.0wt.% of uranium enrichment, 30GWD/tU burnup and 10years cooling, the recovered uranium exhibited an extended burnup up to 14GWD/tU. And among the several safety parameters, the void reactivity at the equilibrium state was estimated 15mk. Additionally, a simple sphere model was constructed to analyze surface dose rates with the Monte Carlo calculations. It was found that the recovered uranium from the spent PWR fuel by electro-refining process has a significant radioactivity depending on the impurities such as fission products.

Chang Je Park; Kweon Ho Kang; Jung Won Lee; Ki Seog Seo

2011-01-01T23:59:59.000Z

417

Optimized fabrication and electrical analysis of silver nanowires templated on DNA molecules  

E-Print Network [OSTI]

. In this letter, we present the base sequence design of synthetic double-stranded DNA dsDNA and fabrication of metallic silver nanowires templated on both synthetic dsDNA and bacteriophage -DNA molecules. We also as programmable interconnects in bio- electronic devices. The DNA base sequence of the synthetic unit dsDNA tile

Finkelstein, Gleb

418

Laser cleaning of tarnished silver and copper threads in museum textiles Christian Degrigny a,  

E-Print Network [OSTI]

Laser cleaning of tarnished silver and copper threads in museum textiles Christian Degrigny a, 44306 Nantes cedex 3, France d Laser and Applications Division, Institute of Electronic Structure and Laser (IESL9), FORTH, Vasilika Vouton, P.O. Box 1527, Heraklion 71110, Crete, Greece Abstract Recent

Boyer, Edmond

419

Silver Surfer: A System to Compare Isometric and Elastic Board Interfaces for Locomotion in VR  

E-Print Network [OSTI]

Silver Surfer: A System to Compare Isometric and Elastic Board Interfaces for Locomotion in VR Jia travel in virtual environments. We also demonstrate the setup of a complete virtual reality system aimed Surf Simulator. Because it is hard for people to yaw a board when standing on it, most board interfaces

Lindeman, Robert W.

420

Atmospheric Corrosion of Silver Investigated by X-ray Photoelectron Spectroscopy Dissertation  

E-Print Network [OSTI]

Atmospheric Corrosion of Silver Investigated by X-ray Photoelectron Spectroscopy Dissertation Atmospheric corrosion is a costly problem. Accelerated laboratory tests, such as the salt fog chamber, have been created to predict corrosion of materials without the need to expose them over long periods

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Harnessing Nanomedicine for Mucosal TheranosticsA Silver Bullet at Last?  

Science Journals Connector (OSTI)

Harnessing Nanomedicine for Mucosal TheranosticsA Silver Bullet at Last? ... (23) It is, therefore, expected that the next therapeutic modality in treating IBD could use targeted nanomedicines that deliver therapeutic cargos to bacteria or to epithelial cells that secrete substances that affect the microbiome. ...

Eran Elinav; Dan Peer

2013-04-09T23:59:59.000Z

422

Transparent conductive grids via direct writing of silver nanoparticle inks Bok Yeop Ahn,a  

E-Print Network [OSTI]

. Using this approach, microscale features ($1 mm) in one-dimensional (1D) to three-dimensional (3D transparency and electrical conductivity.6 Recent efforts have focused on printing and other solution routes and co-workers have produced transparent conductive arrays by inkjet printing of dilute silver

Lewis, Jennifer

423

Phylogeny and Nucleomorph Karyotype Diversity of Chlorarachniophyte Algae TIA D. SILVER,a,1  

E-Print Network [OSTI]

Phylogeny and Nucleomorph Karyotype Diversity of Chlorarachniophyte Algae TIA D. SILVER,a,1 SAYAKA/or reticulopod-forming marine algae with chlorophyll a- and b-containing plastids of secondary endosymbiotic. THE chlorarachniophytes are an enigmatic group of unicellular marine algae with diverse morphologies and a widespread

Archibald, John

424

(Data in metric tons1 of silver content unless otherwise noted)  

E-Print Network [OSTI]

that is reclaimed and recycled annually from photographic wastewater. Import Sources (2005-08):2 Mexico, 54%; Canada in photographic wastewater may be recycled. Silver demand for industrial, photographic, jewelry, silverware Net import reliance8 as a percentage of apparent consumptione 72 63 68 67 63 Recycling: In 2009

425

Bioavailability of silver nanoparticles and ions: from a chemical and biochemical perspective  

Science Journals Connector (OSTI)

...Switzerland 4 Respiratory Medicine, Department of Clinical...increase in the level of nanotechnology-related products...applications, including medicine, consumer products...bacteria, and its uses in medicine. Chem. Rev. ( doi...silver nanoparticles. Nanotechnology 16, 2346-2353...

2013-01-01T23:59:59.000Z

426

Process for forming pure silver ohmic contacts to N- and P-type gallium arsenide materials  

DOE Patents [OSTI]

Disclosed is an improved process for manufacturing gallium arsenide semiconductor devices having as its components a n-type gallium arsenide substrate layer and a p-type gallium arsenide diffused layer. The improved process comprises forming a pure silver ohmic contact to both the diffuse layer and the substrate layer wherein the n-type layer comprises a substantially low doping carrier concentration.

Hogan, S.J.

1983-03-13T23:59:59.000Z

427

Identification of silver and palladium in irradiated TRISO coated particles of the AGR-1 experiment  

Science Journals Connector (OSTI)

Abstract Evidence of the release of certain metallic fission products through intact tristructural isotropic (TRISO) particles has been seen for decades around the world, as well as in the recent AGR-1 experiment at the Idaho National Laboratory (INL). However, understanding the basic mechanism of transport is still lacking. This understanding is important because the TRISO coating is part of the high temperature gas-cooled reactor functional containment and critical for the safety strategy for licensing purposes. Our approach to identify fission products in irradiated AGR-1 TRISO fuel using scanning transmission electron microscopy (STEM), electron energy loss spectroscopy (EELS) and energy filtered TEM (EFTEM), has led to first-of-a-kind data at the nano-scale indicating the presence of silver at triple-points and grain boundaries of the SiC layer in the TRISO particle. Cadmium was also found in the triple junctions. In this initial study, the silver was only identified in SiC grain boundaries and triple points on the edge of the SiCIPyC interface up to a depth of approximately 0.5?m. Palladium was identified as the main constituent of micron-sized precipitates present at the SiC grain boundaries. Additionally spherical nano-sized palladium rich precipitates were found inside the SiC grains. No silver was found in the center of the micron-sized fission product precipitates using these techniques, although silver was found on the outer edge of one of the PdUSi containing precipitates which was facing the \\{IPyC\\} layer. Only PdU containing precipitates were identified in the \\{IPyC\\} layer and no silver was identified in the \\{IPyC\\} layer. The identification of silver alongside the SiC grain boundaries and the findings of Pd inside the SiC grains and alongside SiC grain boundaries provide important information needed to understand silver and palladium transport in TRISO fuel, which has been the topic of international research for the past forty years. The findings reported in this paper may support the postulations of recent research that Ag transport may be driven by grain boundary diffusion. However, more work is needed to fully understand the transport mechanisms. Additionally, the usefulness of the advanced electron microscopic techniques for TRISO coated particle research is demonstrated in this paper.

I.J. van Rooyen; T.M. Lillo; Y.Q. Wu

2014-01-01T23:59:59.000Z

428

Refined understanding of sulfur amino acid nutrition in hybrid striped bass, Morone chrysops (male symbol) x M. saxatilis (female symbol)  

E-Print Network [OSTI]

to methionine supported the lowest responses. Inclusion of MHA or AlimetTM did not affect TAN excretion of HSB. These findings will aid in refining diet formulations for HSB to ensure adequate sulfur amino acid nutrition....

Kelly, Mark Christopher

2005-08-29T23:59:59.000Z

429

Summary of findings from the Biomass Refining Consortium for Applied Fundamentals and Innovation (CAFI): corn stover pretreatment  

Science Journals Connector (OSTI)

The Biomass Refining Consortium for Applied Fundamentals and Innovation, with members from Auburn University ... the course of two separate USDA- and DOE-funded projects, these pretreatment technologies were appl...

Richard T. Elander; Bruce E. Dale; Mark Holtzapple; Michael R. Ladisch

2009-08-01T23:59:59.000Z

430

Fact #676: May 23, 2011 U.S. Refiners Produce about 19 Gallons of Gasoline from a Barrel of Oil  

Broader source: Energy.gov [DOE]

A standard U.S. barrel contains 42 gallons of crude oil which yields about 44 gallons of petroleum products. The additional 2 gallons of petroleum products come from refiner gains which result in...

431

Thermal conductivity studies of novel nanofluids based on metallic silver decorated mesoporous silica nanoparticles  

SciTech Connect (OSTI)

Graphical abstract: - Highlights: Metallic silver was decorated in mSiO{sub 2} with grafted hemiaminal functional groups. Synthesized nanoparticles were used for preparation of glycerol based nanofluids. The effect of temperature, weight fraction of mSiO{sub 2} and concentration of silver nanoparticles on thermal conductivity of nanofluids was investigated. - Abstract: In the present study, the mesoporous structure of silica (mSiO{sub 2}) nanoparticles as well as hemiaminal grafted mSiO{sub 2} decorated by metallic silver (Ag/mSiO{sub 2}) has been used for the preparation of glycerol based nanofluids. Structural and morphological characterization of the synthesized products have been carried out using Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray diffraction (XRD), UVvis spectroscopy, inductively coupled plasma (ICP) and N{sub 2} adsorptiondesorption isotherms. The thermal conductivity and viscosity of the nanofluids have been measured as a function of temperature for various weight fractions and silver concentrations of mSiO{sub 2} and Ag/mSiO{sub 2} nanoparticles, respectively. The results show that the thermal conductivity of the nanofluids increase up to 9.24% as the weight fraction of mSiO{sub 2} increases up to 4 wt%. Also, increasing the percent of the silver decorated mSiO{sub 2} (Ag/mSiO{sub 2}) up to 2.98% caused an enhancement in the thermal conductivity of the base fluid up to 10.95%. Furthermore, the results show that the nanofluids have Newtonian behavior in the tested temperature range for various concentrations of nanoparticles.

Tadjarodi, Azadeh, E-mail: tajarodi@iust.ac.ir [Research Laboratory of Inorganic Materials Synthesis, Department of Chemistry, Iran University of Science and Technology, 16846-13114 Tehran (Iran, Islamic Republic of); Zabihi, Fatemeh [Research Laboratory of Inorganic Materials Synthesis, Department of Chemistry, Iran University of Science and Technology, 16846-13114 Tehran (Iran, Islamic Republic of); Chemistry and Nanotechnology Laboratory, National Center for Laser Science and Technology, Tehran (Iran, Islamic Republic of)

2013-10-15T23:59:59.000Z

432

A study of solvent refining of cottonseed oil by use of a rotating core countercurrent extraction column  

E-Print Network [OSTI]

. Conclusions 7. Bibliography 8. Appendix 23 27 A STUDY OF SOLVENT REFINING OP COTTONSEED OIL BY USE OF A ROTATING CORE COUNTERCURRENT EXTRACTION COLUMN INTRODUCTION In th1s study the applicability oi several solvents for solvent refining crude... countercurrent ex- traction column. Cottonseed oil is essent1ally a triglyceride but contains also a number of impurities. Jamieson and Baughman (7) report the following 1n crude cottonseed oil& rai'finose, pentosans, resins, proteoses, peptones...

Holbrook, Charles Ray

1953-01-01T23:59:59.000Z

433

Grain refinement using equal channel angular extrusion in bulk sections of copper 101 and aluminum alloys 3003 and 6061  

E-Print Network [OSTI]

GRAIN REFINEMENT USING EQUAL CHANNEL ANGULAR EXTRUSION IN BULK SECTIONS OF COPPER 101 AND ALUMINUM ALLOYS 3003 AND 6061 A Thesis by STEPHANE FERRASSE Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 1995 Major Subject: Mechanical Engineering GRAIN REFINEMENT USING EQUAL CHANNEL ANGULAR EXTRUSION IN BULK SECTIONS OF COPPER 101 AND ALUMINUM ALLOYS 3003 AND 6061 A Thesis by STEPHANE FERRASSE...

Ferrasse, Stephane

1995-01-01T23:59:59.000Z

434

Direct Reduction of Waste through Refining of DOE Metal Assets - 13632  

SciTech Connect (OSTI)

CVMR{sup R} presents a technology for refining nickel from the enrichment barrier materials of the DOE that is proven through 100 years of use by the metals industry. CVMR{sup R} applies modern controls, instrumentation for process and monitoring of the system, and innovative production methods to produce a wide spectrum of products that generate new technology applications and improvements to our society and economy. CVMR{sup R} will receive barrier materials as a secure operation and size reduce the metal to a shred that is fed to a carbonylation reactor where nickel is reacted with carbon monoxide and generate nickel carbonyl. The carbonyl will be filtered and decomposed with heat to form a variety of products that include high value nano powders, coated substrates, net shapes and pure nickel. The residue from the reactor will retain radionuclides from enrichment activities. The carbon monoxide will only react and extract nickel under the operating conditions to leave volumetric contamination in the unreacted residue. A demonstration plant was designed and built by CVMR{sup R} and operated by BWXT, to demonstrate the systems capabilities to DOE in 2006. A pilot plant operation precedes the detailed design of the nickel refinery and provides essential data for design, safe work practices, waste characterizations and system kinetics and confirms the project feasibility. CVMR{sup R} produces nickel products that are cleaner than the nickel in U.S. commerce and used by industry today. The CVMR{sup R} process and systems for nickel refining is well suited for DOE materials and will provide value through environmental stewardship, recovery of high value assets, and support of the DOE environmental remediation programs as the refined nickel generates additional long term benefits to local communities. (authors)

Hargett, Michael C.; Terekhov, Dimitri; Khozan, Kamran M. [Chemical Vapour Metal Refining - CVMR (United States)] [Chemical Vapour Metal Refining - CVMR (United States)

2013-07-01T23:59:59.000Z

435

An angularly refineable phase space finite element method with approximate sweeping procedure  

SciTech Connect (OSTI)

An angularly refineable phase space finite element method is proposed to solve the neutron transport equation. The method combines the advantages of two recently published schemes. The angular domain is discretized into small patches and patch-wise discontinuous angular basis functions are restricted to these patches, i.e. there is no overlap between basis functions corresponding to different patches. This approach yields block diagonal Jacobians with small block size and retains the possibility for S{sub n}-like approximate sweeping of the spatially discontinuous elements in order to provide efficient preconditioners for the solution procedure. On the other hand, the preservation of the full FEM framework (as opposed to collocation into a high-order S{sub n} scheme) retains the possibility of the Galerkin interpolated connection between phase space elements at arbitrary levels of discretization. Since the basis vectors are not orthonormal, a generalization of the Riemann procedure is introduced to separate the incoming and outgoing contributions in case of unstructured meshes. However, due to the properties of the angular discretization, the Riemann procedure can be avoided at a large fraction of the faces and this fraction rapidly increases as the level of refinement increases, contributing to the computational efficiency. In this paper the properties of the discretization scheme are studied with uniform refinement using an iterative solver based on the S{sub 2} sweep order of the spatial elements. The fourth order convergence of the scalar flux is shown as anticipated from earlier schemes and the rapidly decreasing fraction of required Riemann faces is illustrated. (authors)

Kophazi, J.; Lathouwers, D. [Faculty of Applied Sciences, Delft University of Technology, Mekelweg 15, NL-2629 JB Delft (Netherlands)

2013-07-01T23:59:59.000Z

436

NETL: Oil & Natural Gas Projects 00516 North Dakota Refining Capacity Study  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

North Dakota Refining Capacity Study North Dakota Refining Capacity Study DE-FE0000516 Goal The objective of the North Dakota Refining Capacity study is to assess the feasibility of increasing the oil refinery capacity in North Dakota, and, if possible, determine the scale of such an expansion, the slate of refined product(s) that would produce the most economic benefit, and the preferred ownership model, i.e., private, public or private-public. Performer North Dakota Association of Rural Electric Cooperatives (NDAREC) Corval Group, partnered with Purvin & Gertz and Mustang Engineering Background The genesis of this study came from an April 2008 report issued by the U.S. Geological Survey (USGS) asserting that North Dakota and Montana have an estimated 3.0 to 4.3 billion barrels of undiscovered, technically recoverable oil in an area known as the Bakken Formation. This assessment shows a 25-fold increase in the amount of recoverable oil compared to the USGS 1995 estimate of 151 million barrels of oil. The Bakken Formation estimate is larger than all other current USGS oil assessments of the lower 48 states and is the largest "continuous" oil accumulation ever assessed by the USGS. The new report points out that the new geologic models applied to the Bakken Formation, advances in drilling and production technologies, and recent oil discoveries have resulted in these substantially larger technically recoverable oil volumes. About 105 million barrels of oil were produced from the Bakken Formation by the end of 2007. In 2008, the formation produced another 27.2 million barrels of oil, which represented 43% of the state’s annual oil production of some 62.3 million barrels. Even though oil prices have dropped significantly in recent months, it appears that oil production from this formation will continue strong for decades to come. Most recently, a major production find has occurred in the Three Forks formation underlying the Bakken. This find is still undergoing significant testing, but early evidence suggests it represents another significant recoverable pool of oil in western North Dakota.

437

Introduction to Energy Savings in Process Heating for the Corn Refining  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Savings in Process Heating for the Corn Savings in Process Heating for the Corn Refining Industry Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

438

Implementation of the refined Deutsch-Jozsa algorithn on a 3-bit NMR quantum computer  

E-Print Network [OSTI]

We implemented the refined Deutsch-Jozsa algorithm on a 3-bit nuclear magnetic resonance quantum computer, which is the meaningful test of quantum parallelism because qubits are entangled. All of the balanced and constant functions were realized exactly. The results agree well with theoretical predictions and clearly distinguish the balanced functions from constant functions. Efficient refocusing schemes were proposed for the soft z-pulse and J-coupling and it is proved that the thermal equilibrium state gives the same results as the pure state for this algorithm.

Jaehyun Kim; Jae-Seung Lee; Soonchil Lee; Chaejoon Cheong

1999-10-04T23:59:59.000Z

439

European refiners must seek creative processes to justify heavy-ends projects  

SciTech Connect (OSTI)

There are strong reasons for wanting to upgrade the bottom of the crude oil barrel. But European refiners will not find it easy to get approval and funding for major capital investment projects. In most cases, investment justification will have to be creative and may need to rely on factors traditionally considered to be outside the conventional refinery fence. Examples of such creative upgrading schemes are those employed in four gasification projects planned for refineries in Italy. It is clear that the major obstacles to heavy residue processing are not technical, but economic. A review of these obstacles will set the stage for European investment in bottom-of-the-barrel processing.

Hunt, P. [Chem Systems Ltd., London (United Kingdom)

1996-12-09T23:59:59.000Z

440

Design refinements and support systems for Texas A&M Automatic Marine Corer  

E-Print Network [OSTI]

to thank his wife, Tommie, for her patience and moral support during the project. vi TABLE OF CONTENTS Chapters I. INTRODUCTION, Page II. DESIGN REFINEMENTS AND TESTING. III. WINCE AND A-FRAME ASSEMBLY AND SUPPORT VESSEL . . 23 IV. LUBRICATION... for testing and demonstration purposes . The parts required for one assembly are shown in Fig. 3. At the time of ordering the material, only 3. 75 in. diameter solid round stock was available. The cutting away of excess stock to produce a 3 in. diameter...

Henderson, Herman Olen

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Techno-economic evaluation of waste lube oil re-refining in Saudi Arabia  

SciTech Connect (OSTI)

About 80 million gallons of automotive lubricating oils are sold in Saudi Arabia. Much of this oil, after use, is actually contributing to the increased pollution of land because of indiscriminate dumping. Any scheme of secondary use of the waste lube oils would be of interest both for conservation of energy resources and for protection of environment. This paper discusses the secondary use for the used automotive lubricating oils. Process technology of Meinken, Mohawk and KTI were selected for the techno-economic feasibility study for refining used oil. Profitability analysis of each process is worked out and the results are compared.

Ali, M.F.; Hamdan, A.J.; Rahman, F. [King Fahd Univ. of Petroleum & Minerals, Dhahran (Saudi Arabia)

1995-12-31T23:59:59.000Z

442

Growth of barley exposed to solvent refined coal (SRC) materials added to soil  

SciTech Connect (OSTI)

The growth of barley plants (Hordeum vulgare) grown in Ritzville silt loam soil, treated with solvent refined coal material, SRC solid (SRC I) and SRC liquid (SRC II) was examined. Although the SRC materials will not be introduced to soil or surface waters in normal uses, they could be spilled during transportation. Such spills could contaminate surface waters and agricultural, rangeland and forest soils, possibly causing acute or chronic damage to plants and also provide a way for certain inorganic and organic materials to enter food chains.

Cline, J.F.; Rickard, W.H.; Thiede, M.E.

1980-01-01T23:59:59.000Z

443

Quantitative phase analysis of Mg:ZrO{sub 2} nanoparticles by Rietveld refinement method  

SciTech Connect (OSTI)

To quantify the structural phases of nanocrystalline ZrO{sub 2} doped with Mg ions of varying concentrations (3, 5, 10, 15 and 20%) and annealed at different temperatures. Magnesia doped zirconia was prepared by chemical co-precipitation method and annealed up to 1000C. The monoclinic and tetragonal phases present in Mg:ZrO{sub 2} were quantified using Rietveld refinement analysis of the X-ray diffraction data and compared with the Direct method based on peak intensity calculations. Tetragonal phase was dominant in the 600C annealed Mg:ZrO{sub 2} for all Mg concentrations.

Balaji, V., E-mail: thangadurai.p@gmail.com; Senthilkumaran, S., E-mail: thangadurai.p@gmail.com; Thangadurai, P., E-mail: thangadurai.p@gmail.com [Center for Nano Science and Technology, Pondicherry University, Puducherry- 605014 (India)

2014-04-24T23:59:59.000Z

444

Microstructural refinement of W-Ni-Fe heavy alloys by alloying additions  

SciTech Connect (OSTI)

This communication describes the effect of alloying additions on grain refinement in tungsten heavy alloys and the resulting changes in mechanical properties. The body-centered-cubic refractory metals, like molybdenum and tantalum, have total solubility in tungsten and a high solubility in the matrix. The solubility of the additive in tungsten provides a means to increase the strength by solid-solution hardening. Alternatively, the solubility of tungsten in the matrix is the key to grain growth and possible strengthening by a reduction in the grain-growth size.

German, R.M.

1988-12-01T23:59:59.000Z

445

Preparation and optical properties of a new nanostructural material: Silver-ion-doped CdS nanoparticles in silicate matrices  

Science Journals Connector (OSTI)

Porous silicate glasses containing cadmium sulfide nanoparticles doped with silver ions have been prepared; light absorption and luminescence have been investigated; and a new general route for the cretion of ...

N. P. Smirnova; A. I. Kryukov; A. M. Eremenko

446

Heat transfer rate of a closed-loop oscillating heat pipe with check valves using silver nanofluid as working fluid  

Science Journals Connector (OSTI)

This research investigated the effect of aspect ratios (evaporator length to inner diameter of capillary tube), inclination angles, and concentrations of silver nanofluid on the heat transfer rate of a closed-loo...

S. Wannapakhe; S. Rittidech; B. Bubphachot

2009-06-01T23:59:59.000Z

447

THE DESORPTION OF SILVER AND THALLIUM FROM SOILS IN THE PRESENCE OF A CHELATING RESIN WITH THIOL  

E-Print Network [OSTI]

isomorphic substitution for potassium leads to its environmental release Water, Air, and Soil Pollution 160 nonferrous mining, metal works, coal combustion, and cement plants (Schoer, 1984). Much more silver

Walter, M.Todd

448

Investigation into the molar feeding ratio and temperature dependence on the replacement reaction between platinum ions and silver nanoparticles  

E-Print Network [OSTI]

The deliberate structuring of bimetallic nanoparticles has useful applications in both fuel cell applications and biomedical research. This thesis studies the replacement reaction between platinum ions and silver nanoparticles, ...

Stuk, Archimedes

2010-01-01T23:59:59.000Z

449

Spectrally controlled atom-by-atom photoassembly of silver clusters on the surface of ionic-covalent crystals  

Science Journals Connector (OSTI)

The fundamental possibility of implementing light-controlled atom-by-atom assembly of silver clusters beginning with dimers and trimers via photostimulated diffusion of individual atoms initially adsorbed on t...

A. N. Latyshev; O. V. Ovchinnikov; M. S. Smirnov

2010-11-01T23:59:59.000Z

450

The Effect of Annealing at 1500 C on Migration and Release of Ion Implanted Silver in CVD Silicon Carbide  

SciTech Connect (OSTI)

The transport of silver in CVD {beta}-SiC has been studied using ion implantation. Silver ions were implanted in {beta}-SiC using the ATLAS accelerator facility at the Argonne National Laboratory. Ion beams with energies of 93 and 161 MeV were used to achieve deposition with peak concentrations at depths of approximately 9 and 13 {micro}m, respectively. As-implanted samples were then annealed at 1500 C for 210 or 480 hours. XPS, SEM, TEM, STEM, and optical methods were used to analyze the material before and after annealing. Silver concentration profiles were determined using XPS before and after annealing. STEM and SEM equipped with quantitative chemical analysis capability were used to more fully characterize the location and morphology of the silver before and after annealing. The results show that, within the uncertainty of measurement techniques, there is no silver migration, via either inter- or intragrannular paths, for the times and temperature studied. Additionally, the silver was observed to phase separate within the SiC after annealing. The irradiation damage from the implantation process resulted in a three-layer morphology in the as-implanted condition: (1) a layer of unaltered SiC, followed by (2) a layer of crystallized SiC, followed by (3) an amorphized layer which contained essentially all of the implanted silver. After annealing the layer structure changed. Layer 1 was unaltered. The grains in layer 2 recrystallized to form an epitaxial (columnar) layer. Layer 3 recrystallized to form a fine grain equiaxed layer. The results of this work do not support the long held assumption that silver release from CVD SiC, used for gas-reactor coated particle fuel, is dominated by grain boundary diffusion.

HJ MacLean; RG Ballinger; LE Kolaya; SA Simonson; N Lewis; M Hanson

2004-10-07T23:59:59.000Z

451

Solvent refined coal process: operation of the solvent refined coal pilot plant, Wilsonville, Alabama. First quarter report, January-March 1981  

SciTech Connect (OSTI)

This report summarizes the operating conditions and test results obtained during the first quarter of 1981 at the six ton per day solvent refined coal (SRC-I) pilot plant in Wilsonville, Alabama. The plant operated for approximately two-thirds of the period with a scheduled shutdown, from 22 February to 17 March, accounting for most of the downtime. Kentucky 9 coal from the Fies mine was processed throughout the period. The following potential process improvements and tests were evaluated in the respective process units. SRC Unit: Low severity run tests to evaluate SRC reactor conditions for two-stage liquefaction; process solvent quality studies while simulating demonstration plant conditions with low quality process solvent (anthracene oil); operation of the new, reduced volume and residence time, V103 High Pressure Separator; Evaluation of the hot separator mode of operation; and adjustment of the T102 Vacuum Column operation to determine if it can produce a combined trays 3 and 8 stream that would be an acceptable process solvent (95% boiling at over 450/sup 0/F). CSD Unit: Steam stripping of SRC and LSRC to reduce product-related DAS losses; and ambient and cryogenic SRC sampling comparisons for DAS determination tests. Pressure checking of the hydrotreater unit was completed, and the Dowtherm system was placed in service. Solvent circulation was initiated in the unit as efforts continued to verify equipment performance.

Lewis, H.E.

1981-01-01T23:59:59.000Z

452

Table 3b. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual  

U.S. Energy Information Administration (EIA) Indexed Site

b. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual b. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual Projected Price in Nominal Dollars (nominal dollars per barrel) 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 AEO 1994 17.06 17.21 18.24 19.43 20.64 22.12 23.76 25.52 27.51 29.67 31.86 34.00 36.05 38.36 40.78 43.29 45.88 48.37 AEO 1995 15.24 17.27 18.23 19.26 20.39 21.59 22.97 24.33 25.79 27.27 28.82 30.38 32.14 33.89 35.85 37.97 40.28 AEO 1996 17.16 17.74 18.59 19.72 20.97 22.34 23.81 25.26 26.72 28.22 29.87 31.51 33.13 34.82 36.61 38.48 40.48

453

Table 3a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual  

U.S. Energy Information Administration (EIA) Indexed Site

a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual Projected Price in Constant Dollars (constant dollars per barrel in "dollar year" specific to each AEO) AEO Dollar Year 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 AEO 1994 1992 16.69 16.43 16.99 17.66 18.28 19.06 19.89 20.72 21.65 22.61 23.51 24.29 24.90 25.60 26.30 27.00 27.64 28.16 AEO 1995 1993 14.90 16.41 16.90 17.45 18.00 18.53 19.13 19.65 20.16 20.63 21.08 21.50 21.98 22.44 22.94 23.50 24.12 AEO 1996 1994 16.81 16.98 17.37 17.98 18.61 19.27 19.92 20.47 20.97 21.41 21.86 22.25 22.61 22.97 23.34 23.70 24.08

454

Integrated analysis and design optimization of germanium purification process using zone-refining technique  

Science Journals Connector (OSTI)

Abstract Germanium (Ge) is a preferred material in the fabrication of high-performance gamma radiation detector for spectroscopy in nuclear physics. To maintain an intrinsic region in which electrons and holes reach the contacts to produce a spectroscopic signal, germanium crystals are usually doped with lithium (Li) ions. Consequently, hyperpure germanium (HPGe) should be prepared before the doping process to eliminate the interference of unexpected impurities in the Li dopant. Zone-refining technique, widely used in purification of ultra-pure materials, is chosen as one of the purification steps during detector-grade germanium production. In the paper, numerical analysis has been conducted to analyze heat transfer, melt flow and impurity segregation during a multi-pass zone-refining process of germanium in a Cyberstar mirror furnace. By modifying the effective redistribution coefficients, axial segregations of various impurities are investigated. Marangoni convection is found dominant in the melt. It affects the purification process through modifying the boundary layer thickness. Impurity distributions along the ingot are obtained with different conditions, such as pass number, zone travel rate, initial impurity concentration, segregation coefficient, and hot-zone length. Based on the analysis, optimization of the purification process design is proposed.

Sen Wang; H.S. Fang; Z.L. Jin; C.J. Zhao; L.L. Zheng

2014-01-01T23:59:59.000Z

455

Relativistic magnetohydrodynamics in dynamical spacetimes: A new adaptive mesh refinement implementation  

SciTech Connect (OSTI)

We have written and tested a new general relativistic magnetohydrodynamics code, capable of evolving magnetohydrodynamics (MHD) fluids in dynamical spacetimes with adaptive-mesh refinement (AMR). Our code solves the Einstein-Maxwell-MHD system of coupled equations in full 3+1 dimensions, evolving the metric via the Baumgarte-Shapiro Shibata-Nakamura formalism and the MHD and magnetic induction equations via a conservative, high-resolution shock-capturing scheme. The induction equations are recast as an evolution equation for the magnetic vector potential, which exists on a grid that is staggered with respect to the hydrodynamic and metric variables. The divergenceless constraint {nabla}{center_dot}B=0 is enforced by the curl of the vector potential. Our MHD scheme is fully compatible with AMR, so that fluids at AMR refinement boundaries maintain {nabla}{center_dot}B=0. In simulations with uniform grid spacing, our MHD scheme is numerically equivalent to a commonly used, staggered-mesh constrained-transport scheme. We present code validation test results, both in Minkowski and curved spacetimes. They include magnetized shocks, nonlinear Alfven waves, cylindrical explosions, cylindrical rotating disks, magnetized Bondi tests, and the collapse of a magnetized rotating star. Some of the more stringent tests involve black holes. We find good agreement between analytic and numerical solutions in these tests, and achieve convergence at the expected order.

Etienne, Zachariah B.; Liu, Yuk Tung [Department of Physics, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States); Shapiro, Stuart L.

2010-10-15T23:59:59.000Z

456

Refined augmented Lagrange Hopfield network-based Lagrange relaxation for hydrothermal scheduling  

Science Journals Connector (OSTI)

This paper proposes a refined augmented Lagrange Hopfield network-based Lagrange relaxation (ALHN-LR) for solving short term hydrothermal scheduling (HTS) problem with pumped-storage hydro units. ALHN-LR consists of improved Lagrange relaxation (ILR) and augmented Lagrange Hopfield network (ALHN). For solving the HTS problem, the proposed method applies enhanced ILR for finding thermal unit scheduling, ALHN for solving constrained economic dispatch (CED), and heuristic search-based algorithms in earlier papers for committing hydro and pumped-storage units, repairing ramp rate, emission, and transmission constraint violations, and refining the obtained result. The proposed ALHN which is a continuous Hopfield network with its energy function based on augmented Lagrangian function can properly handle both equality and inequality constraints in CED problem. The proposed ALHN-LR is tested on a hydrothermal system with 17 thermal, two hydro and two pumped-storage units, and the IEEE 24-bus reliability test system over the 168-hour schedule time horizon. Test results indicate that the proposed method can obtain less total costs than those from augmented Hopfield network (AHN), hybrid enhanced Lagrangian relaxation and quadratic programming (hybrid LRQP), and augmented Lagrangian relaxation (ALR).

Dieu Ngoc Vo; Weerakorn Ongsakul

2013-01-01T23:59:59.000Z

457

8 Modern refining concepts-an update on naphtha-isomerization to modern gasoline manufacture  

Science Journals Connector (OSTI)

Publisher Summary This chapter discusses several major refinery processes to improve RON. These include naphtha-isomerization, reforming, addition of FCC-Naphtha, alkylation, addition of oxygenates or polygas or butanes. Naphtha isomerization is a simple and very cost effective technology for octane replacement. Isomerization of light naphtha streams rich in C5's and C6's typically results in an increase of 10 to 20 octane numbers. The octane increase depends upon the feed composition and the octane need of the refiner. Proper selection of the isomerization technology is an assurance against lack of octane and surplus of benzene in the gasoline pool. Normal C5's and C6's typically are abundant in streams from gas condensate units, light raffinate from aromatics extraction units, and light straight-run naphtha from atmospheric distillation. Even benzene containing feedstocks became potential sources for isomerization as modern catalysts help to manage the benzene surplus through saturation and ring opening reactions to high octane product. This conversion of benzene is an added benefit of isomerization to refiners' economics, especially in those countries where extra credit is given for benzene reduction in the gasoline pool. The isomerization reaction takes place over a catalyst under relatively mild conditions in the presence of hydrogen.

Hartmut Weyda; Ernst Khler

2003-01-01T23:59:59.000Z

458

Autocatalytic silver-plating of aluminium radio frequency waveguides with autocatalytic nickel as the undercoat for space applications  

Science Journals Connector (OSTI)

Autocatalytic plating, a technique used for evenly coating contoured items with deep cavities, such as microwave components, irrespective of shape and size of the item to be plated, was used in this work to coat a radio frequency waveguide. In this work, a process sequence was developed for autocatalytic silver plating on aluminum base material with autocatalytic nickel as the undercoat. The thickness of the deposited silver depends on variables like temperature, concentration of silver ions in the electrolyte, and the pH of the solution. The influence of these variables was studied under different process conditions. Silver-coated rectangular plates were subjected to various tests, including a bend test, a heat resistance test, a thermal cycling test, a thermo vacuum test, a solderability test, and a humidity resistance test. Autocatalytic silver-coated RF waveguide WR28 was tested for insertion loss and return loss. Autocatalytic silver-plated rectangular plates and waveguides were found to withstand a simulated space environment.

Sharad Shukla; N Gomathi; Rene George

2014-01-01T23:59:59.000Z

459

Reduced graphene oxide based silver sulfide hybrid films formed at a liquid/liquid interface  

SciTech Connect (OSTI)

Free-standing, ultra-thin films of silver sulfide and reduced graphene oxide (RGO) based silver sulfide hybrids are prepared at a liquid/liquid interface employing in situ chemical reaction strategy. Ag{sub 2}S and RGO?Ag{sub 2}S hybrid films are characterized by various techniques such as UV-visible and photo luminescence spectroscopy, X-ray diffraction and scanning electron microscopy. The morphology of hybrid films consists of Ag{sub 2}S nanocrystals on RGO surface while Ag{sub 2}S films contains branched network of dendritic structures. RGO?Ag{sub 2}S exhibit interesting optical and electrical properties. The hybrid films absorb in the region 500650 nm and show emission in the red region. A higher conductance is observed for the hybrid films arising from the RGO component. This simple low cost method can be extended to prepare other RGO based metal sulfides.

Bramhaiah, K., E-mail: jsneena@csmr.res.in; John, Neena S., E-mail: jsneena@csmr.res.in [Centre for Soft Matter Research, P.B. No.1329, Jalahalli, Bangalore-560013 (India)

2014-04-24T23:59:59.000Z

460

Boron- and phosphorus-doped polycrystalline silicon thin films prepared by silver-induced layer exchange  

SciTech Connect (OSTI)

Intentional boron and phosphorus doping of polycrystalline silicon thin films on glass prepared by the silver-induced layer exchange is presented. A silver/(titanium) oxide/amorphous silicon stack is annealed at temperatures below the eutectic temperature of the Ag/Si system, leading to a complete layer exchange and simultaneous crystallization of the amorphous silicon. Intentional doping of the amorphous silicon prior to the exchange process results in boron- or phosphorus-doped polycrystalline silicon. Hall effect measurements show carrier concentrations between 2 Multiplication-Sign 10{sup 17} cm{sup -3} and 3 Multiplication-Sign 10{sup 20} cm{sup -3} for phosphorus and 4 Multiplication-Sign 10{sup 18} cm{sup -3} to 3 Multiplication-Sign 10{sup 19} cm{sup -3} for boron-doped layers, with carrier mobilities up to 90 cm{sup 2}/V s.

Antesberger, T.; Wassner, T. A.; Jaeger, C.; Algasinger, M.; Kashani, M.; Scholz, M.; Matich, S.; Stutzmann, M. [Walter Schottky Institut and Physics Department, Technische Universitaet Muenchen, Am Coulombwall 4, 85748 Garching (Germany)] [Walter Schottky Institut and Physics Department, Technische Universitaet Muenchen, Am Coulombwall 4, 85748 Garching (Germany)

2013-05-27T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

In situ transmission electron microscopy observation of silver oxidation in ionized/atomic gas.  

SciTech Connect (OSTI)

The interaction between silver and ionized and atomic gas was observed directly by in situ transmission electron microscopy with an environmental cell for the first time. The electron beam provides dual functions as the source of both gas ionization and imaging. The concentration of ionized gas was tuned via adjusting the current density of the electron beam. Oxidation of the silver is observed in situ, indicating the presence of ionized and/or atomic oxygen. The evolution of microstructure and phase constituents was characterized. Then the oxidation rate was measured, and the relationships among grain size, mass transport rate, and electron flux were characterized. The role of the electron beam is discussed, and the results are rationalized with respect to ex situ results from the literature.

Sun, L.; Noh, K. W.; Wen, J-G.; Dillon, S. J. (Materials Science Division); (Massachusetts Inst. Tech.); (Univ. Illinois - Urbana)

2011-10-17T23:59:59.000Z

462

Self-consistent QM/MM methodologies for structural refinement of photosystem II and other macromolecules of biological interest  

SciTech Connect (OSTI)

The combination of quantum mechanics and molecular mechanics (QM/MM) is one of the most promising approaches to study the structure, function, and properties of proteins and nucleic acids. However, there some instances in which the limitations of either the MM (lack of a proper electronic description) or QM (limited to a few number of atoms) methods prevent a proper description of the system. To address this issue, we review here our approach to fine-tune the structure of biological systems using post-QM/MM refinements. These protocols are based on spectroscopy data, and/or partitioning of the system to extend the QM description to a larger region of a protein. We illustrate these methodologies through applications to several biomolecules, which were pre-optimized at the QM/MM level and then further refined using postQM/MM refinement methodologies: mod(QM/MM), which refines the atomic charges of the residues included in the MM region accounting for polarization effects; mod(QM/MM)-opt that partition the MM region in smaller parts and optimizes each part in an iterative. self-consistent way, and the Polarized-Extended X-Ray Absorption Fine Structure (P-EXAFS) fitting procedure, which fine-tune the atomic coordinates to reproduce experimental polarized EXAFS spectra. The first two techniques were applied to the guanine quadruplex. while the P-EXAFS refinement was applied to the oxygen evolving complex of photosystem II.

Batista, Enrique R [Los Alamos National Laboratory; Sproviero, Eduardo M [YALE UNIV; Newcomer, Michael [YALE UNIV; Gascon, Jose A [YALE UNIV; Batista, Victor S [YALE UNIV

2008-01-01T23:59:59.000Z

463

Schneider Electric Goes Platinumand Silverin Superior Energy Performance  

Broader source: Energy.gov [DOE]

?AMO is proud to announce that Schneider Electric now has five manufacturing facilities certified in the U.S. Department of Energy's (DOE) Superior Energy Performance (SEP) program and ISO 50001. Two Platinum level facilitiesSmyrna, Tennessee, and Seneca, South Carolinaimproved their energy performance by more than 15%. Three Silver level plantsLincoln, Nebraska; Lexington, Kentucky; and Cedar Rapids, Iowaimproved energy performance by more than 5%.

464

Large magnetoresistance in non-magnetic silver chalcogenides and new class of magnetoresistive compounds  

DOE Patents [OSTI]

The heavily-doped silver chalcogenides, Ag.sub.2+.delta. Se and Ag.sub.2+.delta. Te, show magnetoresistance effects on a scale comparable to the "colossal" magnetoresistance (CMR) compounds. Hall coefficient, magnetoconductivity, and hydrostatic pressure experiments establish that elements of narrow-gap semiconductor physics apply, but both the size of the effects at room temperature and the linear field dependence down to fields of a few Oersteds are surprising new features.

Saboungi, Marie-Louis (Chicago, IL); Price, David C. L. (Chicago, IL); Rosenbaum, Thomas F. (Chicago, IL); Xu, Rong (Den Haag, NL); Husmann, Anke (Kiel, DE)

2001-01-01T23:59:59.000Z

465

Infrared-Laser Photoacoustic Spectroscopy for Surface Studies: SF6 Interaction with Silver Films  

Science Journals Connector (OSTI)

Infrared-laser photoacoustic spectroscopy has been applied to surface studies at submonolayer coverage under ultrahigh-vacuum conditions. The adsorption of SF6 on silver films at 90 K was investigated. Simultaneous x-ray photoelectron measurements show that 0.1 of a monolayer can be readily detected with the photoacoustic technique. Photoacoustic spectra from submonolayer to multilayer surface coverages have been obtained and show characteristic SF6 vibrational bands.

F. Trger; H. Coufal; T. J. Chuang

1982-12-06T23:59:59.000Z

466

Rolling contact fatigue in high vacuum using ion plated nickel-copper-silver solid lubrication  

SciTech Connect (OSTI)

Ion plated, nickel-copper-silver coated steel ball bearings that were tested in rolling contact fatigue (RCF) experiments in high vacuum are presented in this article. ANSI T5 ball bearings were coated with approximately 10 nm of nickel-copper followed by 100 nm of silver using a dc ion plating process. The balls were then tested for RCF in vacuum in the 10{sup -7} Torr range at 130 Hz rotational speed and at 4.1 GPa Hertzian contact stress. The significance of this work is in the extension of RCF testing to an ultrahigh vacuum (UHV) application using silver as a lubricant instead of oil. The effects of pressure and voltage on the ion plating process were also investigated using scanning electron microscopy and RCF life testing in UHV. Test results with a ball size of 5/16 in. in UHV show that deposition at voltages greater than 2.5 kV shortens the RCF life and introduces a unique failure mode. Voltage and pressure fluctuations during the deposition process result in significant thickness monitor measurement errors as well. A regulator control scheme that minimizes the process pressure overshoot is also simulated.

Danyluk, Mike; Dhingra, Anoop [Mechanical Engineering Department, University of Wisconsin-Milwaukee, Milwaukee, Wisconsin 53211-3029 (United States)

2011-01-15T23:59:59.000Z

467

The Origin of Surface-Enhanced Raman Scattering of 4,4' -Biphenyldicarboxylate on Silver Substrates  

SciTech Connect (OSTI)

We combine scanning electron microscopy, atomic force microscopy, surface-enhanced Raman scattering (SERS), and tools of computational chemistry to investigate the origin of Raman scattering of 4,4-biphenyldicarboxylic acid adsorbed as 4,4-biphenyldicarboxylate on two different silver substrates. The first consists of a 100 nm deep cylindrical aperture embedded in an array of cylindrical nano-holes featuring an average diameter of 350 nm and a periodicity of 700 nm. The second is a nano-junction formed by a 100 nm silver nano-particle coated with the adsorbate and a flat silver surface. We find that the underlying background signal in the SERS spectra collected from the former strongly resemble the SERS spectra of the nano-sphere-featuring substrate, engineered to operate in the charge transfer plasmon limit. Our analysis of a series of SERS spectra consecutively collected from one nano-cylinder suggests that the optical response of a single molecule can be extracted, its brightest Raman active mode enhanced by a factor of 7.4 x 106.

El-Khoury, Patrick Z.; Peppernick, Samuel J.; Hu, Dehong; Joly, Alan G.; Hess, Wayne P.

2013-04-11T23:59:59.000Z

468

Determine Minimum Silver Flake Addition to GCM for Iodine Loaded AgZ  

SciTech Connect (OSTI)

The minimum amount of silver flake required to prevent loss of I{sub 2} during sintering in air for a SNL Glass Composite Material (GCM) Waste Form containing AgI-MOR (ORNL, 8.7 wt%) was determined to be 1.1 wt% Ag. The final GCM composition prior to sintering was 20 wt% AgI-MOR, 1.1 wt% Ag, and 80 wt% Bi-Si oxide glass. The amount of silver flake needed to suppress iodine loss was determined using thermo gravimetric analysis with mass spectroscopic off-gas analysis. These studies found that the ratio of silver to AgI-MOR required is lower in the presence of the glass than without it. Therefore an additional benefit of the GCM is that it serves to inhibit some iodine loss during processing. Alternatively, heating the AgI-MOR in inert atmosphere instead of air allowed for densified GCM formation without I{sub 2} loss, and no necessity for the addition of Ag. The cause of this behavior is found to be related to the oxidation of the metallic Ag to Ag{sup +} when heated to above ~300{degrees}C in air. Heating rate, iodine loading levels and atmosphere are the important variables that determine AgI migration and results suggest that AgI may be completely incorporated into the mordenite structure by the 550{degrees}C sintering temperature.

Terry J. Garino; Tina M. Nenoff; Mark A. Rodriguez

2014-04-01T23:59:59.000Z

469

Enhancing the Sensitivity of Chemical Sensors for Chlorinated Hydrocarbons in Water by the Use of Tapered Silver Halide Fibers and Tunable Diode Lasers  

Science Journals Connector (OSTI)

Tapered silver halide fibers were used for the first time for high-sensitivity fiber evanescent wave spectroscopic (FEWS) measurements of chlorinated hydrocarbons (CHCs) in water at...

Gbel, Roman; Krska, Rudolf; Kellner, Robert; Kastner, Joachim; Lambrecht, Armin; Tacke, Maurus; Katzir, Abraham

1995-01-01T23:59:59.000Z

470

The Impact of Environmental Compliance Costs on U.S. Refining Profitability 1995-2001  

Gasoline and Diesel Fuel Update (EIA)

Impact of Environmental Impact of Environmental Compliance Costs on U.S. Refining Profitability 1995-2001 May 2003 Energy Information Administration Office of Energy Markets and End Use U.S. Department of Energy Washington, D.C. 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. Contacts This report was prepared in the Office of Energy Markets and End Use of the Energy Information Administration (EIA), U.S. Department of Energy, under the general direction of W. Calvin Kilgore. The project was directed by Mark E. Rodekohr, Director

471

Reasons and current outlook for the sale of federal royalty oil to small and independent refiners  

SciTech Connect (OSTI)

The Department of Interior receives a royalty from oil production on federal lands. Interior can take the royalty as a cash payment or a portion of the oil itself, which it can then sell to small and independent refiners who are determined to be in need of crude oil supplies. Sales of this so-called royalty oil have been held about every 3 years since 1970. In early 1985, Interior announced its intention to terminate the program because of its declining importance and proposed legislation to that effect. While GAO sees no compelling need to legislatively restrict Interior's ability to hold future royalty oil sales now or in the future, it has identified several ways to improve the program's effectiveness. This report examines Interior's basis for the most recent sales and the current status and need for the royalty oil program and discusses ways in which its administration might be improved if future sales are held.

Not Available

1985-08-26T23:59:59.000Z

472

On the Computation of Integral Curves in Adaptive Mesh Refinement Vector Fields  

SciTech Connect (OSTI)

Integral curves, such as streamlines, streaklines, pathlines, and timelines, are an essential tool in the analysis of vector field structures, offering straightforward and intuitive interpretation of visualization results. While such curves have a long-standing tradition in vector field visualization, their application to Adaptive Mesh Refinement (AMR) simulation results poses unique problems. AMR is a highly effective discretization method for a variety of physical simulation problems and has recently been applied to the study of vector fields in flow and magnetohydrodynamic applications. The cell-centered nature of AMR data and discontinuities in the vector field representation arising from AMR level boundaries complicate the application of numerical integration methods to compute integral curves. In this paper, we propose a novel approach to alleviate these problems and show its application to streamline visualization in an AMR model of the magnetic field of the solar system as well as to a simulation of two incompressible viscous vortex rings merging.

Deines, Eduard; Weber, Gunther H.; Garth, Christoph; Van Straalen, Brian; Borovikov, Sergey; Martin, Daniel F.; Joy, Kenneth I.

2011-06-27T23:59:59.000Z

473

Refined methods for the evaluation of coal resources, quantum leaps in productivity  

SciTech Connect (OSTI)

Studies of coal resource evaluations have been constantly refined since the inception of the Joint Coal Availability Project between the Kentucky Geological Survey and the U.S. Geological Survey in the mid 1980's. Originally geological, environmental, social and technical data was collected and analyzed on individual 7.5 minute quadrangles (areas of 50 to 60 square miles). Mineable coal beds were correlated using the best available data and map and mining information accuracy were closely scrutinized. Advancements in Geographical Information Systems (GIS) and the development of regional databases have allowed the US GS to model the geology and mining restrictions in the same detail, but, for much larger areas coal fields and basins, than in the past. This paper will discuss the GIS programs, methodologies, and computer hardware used in the coal evaluations, and results of Illinois, Powder River, and San Juan Basins and Wasatch Plateau studies.

Devereux Carter, M; Rohrbacher, T.; Molnia, C.L.; Osmonson, L.; Treworgy, C.G.; Weisenfluh, G.

1999-07-01T23:59:59.000Z

474

Solvent-refined-coal (SRC) process. Volume II. Sections V-XIV. Final report  

SciTech Connect (OSTI)

This report documents the completion of development work on the Solvent Refined Coal Process by The Pittsburgh and Midway Coal Mining Co. The work was initiated in 1966 under Office of Coal Research, US Department of Interior, Contract No. 14-01-0001-496 and completed under US Department of Energy Contract No. DE-AC05-79ET10104. This report discusses work leading to the development of the SRC-I and SRC-II processes, construction of the Fort Lewis Pilot Plant for the successful development of these processes, and results from the operation of this pilot plant. Process design data generated on a 1 ton-per-day Process Development Unit, bench-scale units and through numerous research projects in support of the design of major demonstration plants are also discussed in summary form and fully referenced in this report.

Not Available

1982-05-01T23:59:59.000Z

475

An adaptively refined phase-space element method for cosmological simulations and collisionless dynamics  

E-Print Network [OSTI]

Dark matter numerical simulations and the N-body method are essential for understanding how structure forms and evolves in the Universe. However, the discrete nature of N-body simulations can affect its accuracy when modelling collisionless systems. We introduce a new approach to simulate the gravitational evolution of cold collisionless fluids by solving the Vlasov-Poisson equations in terms of adaptively refineable "Lagrangian phase space elements". These geometrical elements are piecewise smooth maps between three-dimensional Lagrangian space and six-dimensional Eulerian phase space and approximate the continuum structure of the distribution function. They allow for dynamical adaptive splitting to follow the evolution even in regions of very strong mixing. We discuss various test problems which demonstrate the correctness and performance of our method. We show that it has several advantages compared to standard N-body algorithms by i) explicitly tracking the fine-grained distribution function, ii) naturall...

Hahn, Oliver

2015-01-01T23:59:59.000Z

476

Development of a performance-based industrial energy efficiency indicator for corn refining plants.  

SciTech Connect (OSTI)

Organizations that implement strategic energy management programs have the potential to achieve sustained energy savings if the programs are carried out properly. A key opportunity for achieving energy savings that plant managers can take is to determine an appropriate level of energy performance by comparing their plant's performance with that of similar plants in the same industry. Manufacturing facilities can set energy efficiency targets by using performance-based indicators. The U.S. Environmental Protection Agency (EPA), through its ENERGY STAR{reg_sign} program, has been developing plant energy performance indicators (EPIs) to encourage a variety of U.S. industries to use energy more efficiently. This report describes work with the corn refining industry to provide a plant-level indicator of energy efficiency for facilities that produce a variety of products--including corn starch, corn oil, animal feed, corn sweeteners, and ethanol--for the paper, food, beverage, and other industries in the United States. Consideration is given to the role that performance-based indicators play in motivating change; the steps needed to develop indicators, including interacting with an industry to secure adequate data for an indicator; and the actual application and use of an indicator when complete. How indicators are employed in the EPA's efforts to encourage industries to voluntarily improve their use of energy is discussed as well. The report describes the data and statistical methods used to construct the EPI for corn refining plants. Individual equations are presented, as are the instructions for using them in an associated Excel spreadsheet.

Boyd, G. A.; Decision and Information Sciences; USEPA

2006-07-31T23:59:59.000Z

477

Hybrid Characteristics: 3D radiative transfer for parallel adaptive mesh refinement hydrodynamics  

E-Print Network [OSTI]

We have developed a three-dimensional radiative transfer method designed specifically for use with parallel adaptive mesh refinement hydrodynamics codes. This new algorithm, which we call hybrid characteristics, introduces a novel form of ray tracing that can neither be classified as long, nor as short characteristics, but which applies the underlying principles, i.e. efficient execution through interpolation and parallelizability, of both. Primary applications of the hybrid characteristics method are radiation hydrodynamics problems that take into account the effects of photoionization and heating due to point sources of radiation. The method is implemented in the hydrodynamics package FLASH. The ionization, heating, and cooling processes are modelled using the DORIC ionization package. Upon comparison with the long characteristics method, we find that our method calculates the column density with a similarly high accuracy and produces sharp and well defined shadows. We show the quality of the new algorithm in an application to the photoevaporation of multiple over-dense clumps. We present several test problems demonstrating the feasibility of our method for performing high resolution three-dimensional radiation hydrodynamics calculations that span a large range of scales. Initial performance tests show that the ray tracing part of our method takes less time to execute than other parts of the calculation (e.g. hydrodynamics and adaptive mesh refinement), and that a high degree of efficiency is obtained in parallel execution. Although the hybrid characteristics method is developed for problems involving photoionization due to point sources, the algorithm can be easily adapted to the case of more general radiation fields.

Erik-Jan Rijkhorst; Tomasz Plewa; Anshu Dubey; Garrelt Mellema

2005-05-10T23:59:59.000Z

478

Synthesis and single crystal structure refinement of the one-layer hydrate of sodium brittle mica  

SciTech Connect (OSTI)

A sodium brittle mica with the ideal composition [Na{sub 4}]{sup inter}[Mg{sub 6}]{sup oct}[Si{sub 4}Al{sub 4}]{sup tet}O{sub 20}F{sub 4} was synthesized via melt synthesis in a gas tight crucible. This mica is unusual inasmuch as the known mica structure holds only room for two interlayer cations per unit cell and inasmuch as it readily hydrates despite the high layer charge while ordinary micas and brittle micas are non-swelling. The crystal structure of one-layer hydrate sodium brittle mica was determined and refined from single crystal X-ray data. Interlayer cations reside at the center of the distorted hexagonal cavities and are coordinated by the three inner basal oxygen atoms. The coordination of the interlayer cation is completed by three interlayer water molecules residing at the center of the interlayer region. The relative position of adjacent 2:1-layers thus is fixed by these octahedrally coordinated interlayer cations. Pseudo-symmetry leads to extensive twinning. In total five twin operations generate the same environment for the interlayer species and are energetically degenerate. - Graphical abstract: The sodium brittle mica has been successfully synthesized by melt synthesis and the crystal structure of the one-layer hydrate of sodium brittle mica was determined from single crystal X-ray diffraction data. Highlights: Black-Right-Pointing-Pointer Melt synthesis yielded coarse grained sodium brittle mica which showed little disorder. Black-Right-Pointing-Pointer Sodium brittle mica hydrated completely to the state of one-layer hydrate. Black-Right-Pointing-Pointer Structure of one-layer hydrate of sodium brittle mica could therefore be determined and refined. Black-Right-Pointing-Pointer Arrangement of upper and lower tetrahedral sheet encompassing interlayer cation were clarified.

Kalo, Hussein; Milius, Wolfgang [Lehrstuhl fuer Anorganische Chemie I, University of Bayreuth, D-95440 Bayreuth (Germany)] [Lehrstuhl fuer Anorganische Chemie I, University of Bayreuth, D-95440 Bayreuth (Germany); Braeu, Michael [BASF Construction Chemicals GmbH, 83308 Trostberg (Germany)] [BASF Construction Chemicals GmbH, 83308 Trostberg (Germany); Breu, Josef, E-mail: Josef.Breu@uni-bayreuth.de [Lehrstuhl fuer Anorganische Chemie I, University of Bayreuth, D-95440 Bayreuth (Germany)] [Lehrstuhl fuer Anorganische Chemie I, University of Bayreuth, D-95440 Bayreuth (Germany)

2013-02-15T23:59:59.000Z

479

Application of the BETC re-refining technology to some state-of-the-art commercial lube oils  

SciTech Connect (OSTI)

Five new lubricating oils of the extended drain and/or friction modified-type were charged to vehicles and used. The segregated drainings from each oil were re-refined by the solvent treatment/distillation process developed by the Bartlesville Energy Technology Center. The solvent treatment step of this process failed to desludge these oils significantly, indicating high levels of active dispersant additives remaining in the oils because of insufficient use. The overall process was successful, however, in producing re-refined basestocks of apparent high quality from the used oils. Thus, it would appear that direct distillation without pretreatment would have been adequate for these segregated samples.

Reynolds, J.W.; Brinkman, D.

1981-07-01T23:59:59.000Z

480

Verification, optimization and refinement of a direct-inverse transonic wing design method including weak viscous interaction  

E-Print Network [OSTI]

and Refinement of a. Direct-Inverse Transonic Wing Design Method Including Weak Viscous Interaction. (August 1989) Robert R. Ratcliff, B. S. , Texas A&M University Chair oi' Advisory Committee: Dr. Leland A. Carlson New developments in the direct-inverse wing... AND DISCUSSION . 92 VI V. 1 Bound&ary L&iyer and Wake Effects . . V. 2 Spanwise Grid Skewness V. 3 Wing Planform Effects V. 4 Initial Profile Efi'ects V. 5 Pressure Distribution Compatibility V. 6 Grid Refinement Effects . . V. 7 Fixed Trailing Edge...

Ratcliff, Robert R.

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "inland refining silver" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Claudio Schepke: Online Parallel Mesh Refinement for Climatological Applications Weather forecasts for long periods of time have emerged as increasingly important.  

E-Print Network [OSTI]

Claudio Schepke: Online Parallel Mesh Refinement for Climatological Applications Weather forecasts, this presentation discusses how to explore parallelism at different levels for climatological models, like OLAM

Wichmann, Felix

482

SYSTEM-ON-CHIP POWER CONSUMPTION REFINEMENT AND David Y. Feinstein, Mitchell A. Thornton and Fatih Kocan  

E-Print Network [OSTI]

SYSTEM-ON-CHIP POWER CONSUMPTION REFINEMENT AND ANALYSIS David Y. Feinstein, Mitchell A. Thornton {dfeinste,mitch,kocan}@engr.smu.edu Abstract Accurate power consumption estimation of a System-on- Chip (So current consumption. It is very important that these estimations will be fine tuned to the specific So

Thornton, Mitchell

483

Using Knowledge-Based Neural Networks to Improve Algorithms: Refining the Chou-Fasman Algorithm for Protein Folding  

E-Print Network [OSTI]

for Protein Folding Richard Maclin Jude W. Shavlik Computer Sciences Dept. University of Wisconsin 1210 W learning Theory refinement Neural networks Finite-state automata Protein folding Chou-Fasman algorithm-Fasman algorithm, a method for predicting how globular proteins fold. Empirical evidence shows

Maclin, Rich

484

North Carolina used motor oil re-refining program: site selection, permits, and environmental impact study. [Re-refinery  

SciTech Connect (OSTI)

The State of North Carolina has a used motor oil re-refining program that collects crankcase drainings from various sources, re-refines it in a plant purchased from the Phillips Petroleum Company, and distributes the product to State and other governmental garages. This report describes the steps between the initial decision to establish a used oil re-refining demonstration program and receipt of a final permit to operate a facility. The report covers in some detail those issues faced in obtaining approval to establish the program, select a site, gain permits for construction and operation, prepare an acceptable environmental impact statement, and start re-refining used motor oil. Many of the considerations made during this experience are germaine to other states and to private enterprise, although the details may vary. This is the first in what is expected to be a related series of reports; subsequent numbers will cover the economics of plant acquisition and start-up, technical considerations, and long term operations of the re-refinery.

Griffith, W.C.; Holland, G.M.; Taylor, A.; Taylor, S.

1981-12-01T23:59:59.000Z

485

Neutron and X-ray diffraction and empirical potential structure refinement modelling of magnesium stabilised amorphous calcium  

E-Print Network [OSTI]

Neutron and X-ray diffraction and empirical potential structure refinement modelling of magnesium online xxxx Keywords: Amorphous calcium carbonate; EPSR modelling; Neutron diffraction; X-ray diffraction Amorphous calcium carbonate (ACC) plays a key role in biomineralisation processes in sea organisms. Neutron

Benning, Liane G.

486

LJournal of Alloys and Compounds 291 (1999) 94101 The simultaneous powder X-ray and neutron diffraction refinement of two  

E-Print Network [OSTI]

melting of metals in the The intermetallic ternary transition metal nitrides and presence of carbon]. These phases are of interest decomposition of transition metal tris­ethylenediamine to the solid state chemist diffraction refinement of two h-carbide type nitrides, Fe Mo N and Co Mo N, prepared by3 3 3 3 ammonolysis

zur Loye, Hans-Conrad

487

Uptake of Toxic Metal Ions from Water by Naked and Monolayer Protected Silver Nanoparticles: An X-ray Photoelectron Spectroscopic Investigation  

Science Journals Connector (OSTI)

Uptake of Toxic Metal Ions from Water by Naked and Monolayer Protected Silver Nanoparticles: An X-ray Photoelectron Spectroscopic Investigation ... Several other remedial measures including nano zerovalent iron (nzvi) has been proposed. ... Although several studies have investigated gold from the perspective of heavy metal remediation, investigations to such depth have not happened with silver. ...

M. S. Bootharaju; T. Pradeep

2010-04-15T23:59:59.000Z

488

Can oil prices help estimate commodity futures prices? The cases of copper and silver  

Science Journals Connector (OSTI)

There is an extensive literature on modeling the stochastic process of commodity futures. It has been shown that models with several risk factors are able to adequately fit both the level and the volatility structure of observed transactions with reasonable low errors. One of the characteristics of commodity futures markets is the relatively short term maturity of their contracts, typically ranging for only a few years. This poses a problem for valuing long term investments that require extrapolating the observed term structure. There has been little work on how to effectively do this extrapolation and in measuring its errors. Cortazar et al. (2008b) propose a multicommodity model that jointly estimates two commodities, one with much longer maturity futures contracts than the other, showing that futures prices of one commodity may be useful information for estimating the stochastic process of another. They implement the procedure using highly correlated commodities like WTI and Brent. In this paper we analyze using prices of long term oil futures contracts to help estimate long term copper and silver future prices. We start by analyzing the performance of the Cortazar et al. (2008b) multicommodity model, now applied to oil-copper and oil-silver which have much lower correlation than the WTIBrent contracts. We show that for these commodities with lower correlation the multicommodity model seems not to be effective. We then propose a modified multicommodity model with a much simpler structure which is easier to estimate and that uses the non-stationary long term process of oil to help estimate long term copper and silver futures prices, achieving a much better fit than using available individual or multicommodity models.

Gonzalo Cortazar; Francisco Eterovic

2010-01-01T23:59:59.000Z

489

Quantifying Stove Emissions Related to Different Use Patterns for the Silver-mini  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Quantifying Stove Emissions Related to Quantifying Stove Emissions Related to Different Use Patterns for the Silver-mini (Small Turkish) Space Heating Stove Randy Maddalena, Melissa Lunden, Daniel Wilson, Cristina Ceballos, Thomas Kirchstetter, Jonathan Slack, Larry Dale Environmental Energy Technologies Division Indoor Environment Group Lawrence Berkeley National Laboratory Berkeley, CA 94720 August 2012 This work was supported by the Millennium Challenge Corporation, USA and by the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. LBNL-6319E Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither

490

Thermal expansion of multiwall carbon nanotube reinforced nanocrystalline silver matrix composite  

SciTech Connect (OSTI)

Multiwall carbon nanotube reinforced silver matrix composite was fabricated by novel molecular level mixing method, which involves nucleation of Ag ions inside carbon nanotube dispersion at the molecular level. As a result the carbon nanotubes get embedded within the powder rather than on the surfaces. Micro structural characterization by X- ray diffraction and scanning electron microscopy reveals that the nanotubes are homogeneously dispersed and anchored within the matrix. The thermal expansion of the composite with the multiwall nanotube content (0, 1.5 vol%) were investigated and it is found that coefficient of thermal expansion decreases with the addition of multiwall nanotube content and reduce to about 63% to that of pure Ag.

Sharma, Manjula, E-mail: manjula.physics@gmail.com; Sharma, Vimal [Department of Physics, NIT Hamirpur - 177005, HP (India); Pal, Hemant [Department of Physics, NIT Hamirpur - 177005, HP, India and Department of Physics, Govt. College Chamba - 176310, HP (India)

2014-04-24T23:59:59.000Z

491

Microsoft Word - Chemetall Foote_Kings Mountain and Silver Peak Final EA 9-15-10-1 _3_  

Broader source: Energy.gov (indexed) [DOE]

5 5 Final Environmental Assessment For Chemetall Foote Corporation Electric Drive Vehicle Battery and Component Manufacturing Initiative Kings Mountain, NC and Silver Peak, NV September 2010 Prepared for: Department of Energy National Energy Technology Laboratory This page intentionally left blank. Electric Drive Vehicle Battery and DOE/EA-1715 Component Manufacturing Initiative Project Environmental Assessment Chemetall Foote Corporation, Kings Mountain, NC and Silver Peak, NV September 2010 National Environmental Policy Act (NEPA) Compliance Cover Sheet Proposed Action: The U.S. Department of Energy (DOE) proposes, through a cooperative agreement with Chemetall Foote Corporation (Chemetall) to partially fund: (1) the establishment of a new 5,000 metric ton per year lithium

492

NA Standards | Refinement Parameters | X-PLOR param file for high  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the file for different bond distances and angles of C2'and C3'-endo the file for different bond distances and angles of C2'and C3'-endo remark K= scale*(kT/sigma**2), scales=Base 0.1875, Sugar 0.566, Phos 1.548 ! removed references to CA, CF, CS, MG, NH3, OS (ATB 12/30/94) ! removed TIP3 water model (ATB 12/30/94) ! mapped NA->NNA, CH3E->CC3E (ATB 12/30/94) ! G.PARKINSON, J.VOJTECHOVSKY, L.CLOWNEY, A.T.BRUNGER ! H.M.BERMAN ! NEW PARAMETERS FOR THE REFINEMENT OF NUCLEIC ACID CONTAINING ! STRUCTURES ! ACTA CRYST.D (1996) v. 52 57-64 set echo=false end !the generic bonds were taken from param11.dna with 3*kq bond C5R OH 876.000 1.4300 ! 5' end bond C5D OH 876.000 1.4300 ! 5' end bond C3R OH 876.000 1.4300 ! 3' end bond C3D OH 876.000 1.4300 ! 3' end bond HHO O2R 1350.000 0.9572 !Mod HO to HHO 05/15/96

493

Microstructural refinement and strengthening of Cu-4 Cr-2 Nb alloy by mechanical milling  

SciTech Connect (OSTI)

Lately, a variety of dispersion strengthened (DS) copper alloys that provide a good combination of thermal/electrical conductivity and mechanical strength have been developed. Strengthening is usually achieved by the introduction of a ceramic, refractory metal or intermetallic secondary phase. Cu-Cr-Nb is one such DS alloy in which strengthening is provided by Cr{sub 2}Nb intermetallic particles. Mechanical milling of as-atomized Cu-4 Cr-2 Nb alloy powders substantially increases the mechanical strength (hardness) of the starting material. This is achieved through a drastic grain size, as well as large precipitate size refinement. A more uniform precipitate distribution is also attained. Whether milling is performed with steel or WC vial and balls the hardness saturates at approximately 100 HRB after about 4 hr milling. However, this benefit of MM was offset by an equally severe decrease in electrical conductivity. This decrease is attributed to impurities/contamination from the milling media introduced into the milled powder, primarily, Fe and C, or, WC and Co.

Anderson, K.R.; Groza, J.R. [Univ. of California, Davis, CA (United States). Dept. of Chemical Engineering and Materials Science] [Univ. of California, Davis, CA (United States). Dept. of Chemical Engineering and Materials Science; Ulmer, D.G. [Rockwell International, Canoga Park, CA (United States). Rocketdyne Div.] [Rockwell International, Canoga Park, CA (United States). Rocketdyne Div.

1997-07-15T23:59:59.000Z

494

Decontamination and decarburization of stainless and carbon steel by melt refining  

SciTech Connect (OSTI)

With many nuclear reactors and facilities being decommissioned in the next ten to twenty years the concern for handling and storing Radioactive Scrap Metal (RSM) is growing. Upon direction of the DOE Office of Environmental Restoration and Waste Management, Lockheed Idaho Technology Company (LITCO) is developing technologies for the conditioning of spent fuels and high-level wastes for interim storage and repository acceptance, including the recycling of Radioactive Scrap Metals (RSM) for beneficial reuse with the DOE complex. In February 1993, Montana Tech of the University of Montana was contracted to develop and demonstrate technologies for the decontamination of stainless steel RSM. The general objectives of the Montana Tech research program included conducting a literature survey, performing laboratory scale melt refining experiments to optimize decontaminating slag compositions, performing an analysis of preferred melting techniques, coordinating pilot scale and commercial scale demonstrations, and producing sufficient quantities of surrogate-containing material for all of the laboratory, pilot and commercial scale test programs. Later on, the program was expanded to include decontamination of carbon steel RSM. Each research program has been completed, and results are presented in this report.

Mizia, R.E.; Worcester, S.A.; Twidwell, L.G.; Webber, D.; Paolini, D.J.; Weldon, T.A.

1996-09-05T23:59:59.000Z

495

Refinement, Validation and Application of Cloud-Radiation Parameterization in a GCM  

SciTech Connect (OSTI)

The research performed under this award was conducted along 3 related fronts: (1) Refinement and assessment of parameterizations of sub-grid scale radiative transport in GCMs. (2) Diagnostic studies that use ARM observations of clouds and convection in an effort to understand the effects of moist convection on its environment, including how convection influences clouds and radiation. This aspect focuses on developing and testing methodologies designed to use ARM data more effectively for use in atmospheric models, both at the cloud resolving model scale and the global climate model scale. (3) Use (1) and (2) in combination with both models and observations of varying complexity to study key radiation feedback Our work toward these objectives thus involved three corresponding efforts. First, novel diagnostic techniques were developed and applied to ARM observations to understand and characterize the effects of moist convection on the dynamical and thermodynamical environment in which it occurs. Second, an in house GCM radiative transfer algorithm (BUGSrad) was employed along with an optimal estimation cloud retrieval algorithm to evaluate the ability to reproduce cloudy-sky radiative flux observations. Assessments using a range of GCMs with various moist convective parameterizations to evaluate the fidelity with which the parameterizations reproduce key observable features of the environment were also started in the final year of this award. The third study area involved the study of cloud radiation feedbacks and we examined these in both cloud resolving and global climate models.

Dr. Graeme L. Stephens

2009-04-30T23:59:59.000Z

496

Technical support to the Solvent Refined Coal (SRC) demonstration projects: assessment of current research and development  

SciTech Connect (OSTI)

A program to demonstrate Solvent Refined Coal (SRC) technology has been initiated by the US Department of Energy (DOE) in partnership with two industrial groups. Project management responsibility has been assigned to the Oak Ridge Operations Office (ORO) of DOE. ORO requested that the Oak Ridge National Laboratory assess current research and development (R and D) activities and develop recommendations for those activities that might contribute to successful completion of the SRC demonstration plant projects. The objectives of this final report are to discuss in detail the problem areas in SRC; to discuss the current and planned R and D investigations relevant to the problems identified; and to suggest appropriate R and D activities in support of designs for the SRC demonstration plants. Four types of R and D activities are suggested: continuation of present and planned activities; coordination of activities and results, present and proposed; extension/redirection of activities not involving major equipment purchase or modifications; and new activities. Important examples of the first type of activity include continuation of fired heater, slurry rheology, and slurry mixing studies at Ft. Lewis. Among the second type of activity, coordination of data acquisition and interpretation is recommended in the areas of heat transfer, vapor/liquid equilibria, and physical properties. Principal examples of recommendations for extension/redirection include screening studies at laboratory scale on the use of carbonaceous precoat (e.g., anthracite) infiltration, and 15- to 30-day continuous tests of the Texaco gasifier at the Texaco Montebello facility (using SRC residues).

Edwards, M.S.; Rodgers, B.R.; Brown, C.H.; Carlson, P.K.; Gambill, W.R.; Gilliam, T.M.; Holmes, J.M.; Krishnan, R.P.; Parsly, L.F.

1980-12-01T23:59:59.000Z

497

A NEW GHOST-NODE METHOD FOR LINKING DIFFERENT MODELS WITH VARIED GRID REFINEMENT  

SciTech Connect (OSTI)

A flexible, robust method for linking grids of locally refined models that may be constructed using different types of numerical methods is needed to address a variety of hydrologic problems. This work outlines and tests a new ghost-node model-linking method based on the iterative method of Mehl and Hill (2002, 2004). It is applicable to steady-state solutions for ground-water flow. Tests are presented for a homogeneous two-dimensional system that facilitates clear analysis of typical problems. The coupled grids are simulated using the finite-difference and finite-element models MODFLOW and FEHM. Results indicate that when the grids are matched spatially so that nodes and control volume boundaries are aligned, the new coupling technique has approximately twice the error as coupling using two MODFLOW models. When the grids are non-matching; model accuracy is slightly increased over matching grid cases. Overall, results indicate that the ghost-node technique is a viable means to accurately couple distinct models.

J. dickinson; S.C. James; S. Mehl; M.C. Hill; S. Leake; G.A. Zyvoloski

2005-10-18T23:59:59.000Z

498

Solvent refined coal (SRC) process. Quarterly technical progress report, January 1980-March 1980. [In process streams  

SciTech Connect (OSTI)

This report summarizes the progress of the Solvent Refined Coal (SRC) project at the SRC Pilot Plant in Fort Lewis, Wahsington, and the Process Development Unit (P-99) in Harmarville, Pennsylvania. After the remaining runs of the slurry preheater survey test program were completed January 14, the Fort Lewis Pilot Plant was shut down to inspect Slurry Preheater B and to insulate the coil for future testing at higher rates of heat flux. Radiographic inspection of the coil showed that the welds at the pressure taps and the immersion thermowells did not meet design specifications. Slurry Preheater A was used during the first 12 days of February while weld repairs and modifications to Slurry Preheater B were completed. Two attempts to complete a material balance run on Powhatan No. 6 Mine coal were attempted but neither was successful. Slurry Preheater B was in service the remainder of the quarter. The start of a series of runs at higher heat flux was delayed because of plugging in both the slurry and the hydrogen flow metering systems. Three baseline runs and three slurry runs of the high heat flux program were completed before the plant was shut down March 12 for repair of the Inert Gas Unit. Attempts to complete a fourth slurry run at high heat flux were unsuccessful because of problems with the coal feed handling and the vortex mix systems. Process Development Unit (P-99) completed three of the four runs designed to study the effect of dissolver L/D ratio. The fourth was under way at the end of the period. SRC yield correlations have been developed that include coal properties as independent variables. A preliminary ranking of coals according to their reactivity in PDU P-99 has been made. Techniques for studying coking phenomenona are now in place.

Not Available

1981-01-01T23:59:59.000Z

499

A field study evaluation of short-term refined Gaussian dispersion models  

SciTech Connect (OSTI)

A tracer study was conducted at the Duke Forest Site in Chapel Hill, North Carolina in January, 1995 to evaluate the ability of three short-term refined Gaussian dispersion models to predict the fate of volume source emissions under field study conditions. Study participants included the American Petroleum Institute (API), the US Environmental Protection Agency (EPA), the US Department of Energy (DOE), the University of North Carolina at Chapel Hill (UNC), and private consulting firms. The models evaluated were Industrial Source Complex--Short Term versions 2 and 3 (ISC2, ISC3) and the American Meteorological Society (AMS) Environmental Protection Agency (EPA) Regulatory Model Improvement Committee (AERMIC) model, AERMOD. All three models are based on the steady-state Gaussian plume dispersion equation, which predicts concentrations at downwind receptor locations when integrated over the distance between the source and receptor. Chemicals were released at known rates and measurements were taken at various points in the study field using Tedlar bag point sampling and open-path Fourier Transform infrared (OP-FTIR) monitoring. The study found that ISC and AERMOD underpredicted the measured concentrations for each dataset collected in the field study. ISC and AERMOD each underpredicted the OPFTIR dataset by a factor of approximately 1.6. ISC underpredicted the Tedlar{reg_sign} dataset by approximately 2.1, while AERMOD underpredicted by a factor of approximately 2.6. Regardless of source configuration or measurement technique used, under-prediction with respect to the measured concentration was consistently observed. This indicates that safety factors or other corrections may be necessary in predicting contaminant concentrations over the distances examined in this study, i.e., in the near field of less than 200 meters.

Piper, A.

1996-12-31T23:59:59.000Z

500

Inspection of integrated two-stage liquefaction products as petroleum refining feedstocks  

SciTech Connect (OSTI)

Regardless of the specific technology used to produce transportation fuels from coal, the net product of the liquefaction process will have to undergo additional refining to make finished products. Consequently, there is a need to characterize the material that exits the liquefaction plant as net product and enters the refinery as feed. The net product of the Integrated Two-Stage Liquefaction (ITSL) process, as practiced at the 6 ton/day (5.5 tonne/day) Wilsonville, Alabama (USA) plant, is a distillable liquid boiling predominantly below 650{degrees}F (343{degrees}C). Products from ITSL operations at the Wilsonville plant were evaluated through the use of standard petroleum tests on several occasions. However, those evaluations were performed on materials generated much earlier in the ITSL campaign and, thus, may not be representative of products generated from the process as it is currently configured. For this work, net products were obtained for analysis from ITSL operations during fully lined-out material balance operating periods.Samples were taken fro Run 259G, which was operated with Ireland Mine coal (hvAb, Pittsburgh seam, West Virginia, USA) and from Run 260D, which was operated with Black Thunder Mine coal (subbituminous, Powder River Basin, Wyoming, USA). A complete suite of light crude oil assay tests was performed on each sample. These assays included tests on the whole coal liquid, and the separated naphtha (<380{degrees}F/193{degrees}C), jet fuel or kerosene (380{degrees}F/193{degrees}C {times} 510{degrees}F/266{degrees}C), and diesel fuel (>510{degrees}F/266{degrees}C) fractions. The results of the assays were compared against typical petroleum product specifications. The discussion will concentrate on the test results of the bituminous coal product.

Winschel, R.A.; Burke, F.P. [Consolidation Coal Co., Library, PA (United States); Zhou, P. [Burns and Roe Services Corp., Pittsburgh, PA (United States)

1991-12-31T23:59:59.000Z