National Library of Energy BETA

Sample records for ingest software status

  1. ACRF Ingest Software Status: New, Current, and Future - June 2008

    SciTech Connect (OSTI)

    AS Koontz; S Choudhury; BD Ermold; NN Keck; KL Gaustad; RC Perez

    2008-06-01

    The purpose of this report is to provide status of the ingest software used to process instrument data for the Atmospheric Radiation Measurement (ARM) Program Climate Research Facility (ACRF). The report is divided into 4 sections: (1) for news about ingests currently under development, (2) for current production ingests, (3) for future ingest development plans, and (4) for information on retired ingests. Please note that datastreams beginning in “xxx” indicate cases where ingests run at multiple ACRF sites, which results in a datastream(s) for each location.

  2. ARM Climate Research Facility Quarterly Ingest Status Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 ARM Climate Research Facility Quarterly Ingest Status Report A Koontz C Sivaraman October 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not

  3. HARDWARE AND SOFTWARE STATUS OF QCDOC.

    SciTech Connect (OSTI)

    BOYLE,P.A.; CHEN,D.; CHRIST,N.H.; PETROV.K.; ET AL.

    2003-07-15

    QCDOC is a massively parallel supercomputer whose processing nodes are based on an application-specific integrated circuit (ASIC). This ASIC was custom-designed so that crucial lattice QCD kernels achieve an overall sustained performance of 50% on machines with several 10,000 nodes. This strong scalability, together with low power consumption and a price/performance ratio of $1 per sustained MFlops, enable QCDOC to attack the most demanding lattice QCD problems. The first ASICs became available in June of 2003, and the testing performed so far has shown all systems functioning according to specification. We review the hardware and software status of QCDOC and present performance figures obtained in real hardware as well as in simulation.

  4. PCMDI software system: status and future plans report no. 44

    SciTech Connect (OSTI)

    Williams, Dean N.

    1997-08-01

    This report describes the current status and future plans of PCMDI`s software products. A complete description of each product is provided, including the product`s problem statement, purpose, requirements, design diagram, current status, future development, developers, contributors, and off-site collaborators. While it is noted that each software product can be executed as an independent process, it is important to discern that all products work together in the complete PCMDI Software Systems: A suite of software tools facilitating for the storage, diagnosis, and visualization of climate data.

  5. ARM - Ingest

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field...

  6. 2011 SAPHIRE 8 Software Quality Assurance Status Report

    SciTech Connect (OSTI)

    Kurt G. Vedros

    2011-09-01

    The Software Quality Assurance engineer position was created in fiscal year 2011 to better maintain and improve the quality of the SAPHIRE 8 development program. This year's Software Quality Assurance tasks concentrated on developing the framework of the SQA program. This report reviews the accomplishments and recommendations for each of the subtasks set forth for JCN V6059: (1) Reviews, Tests, and Code Walkthroughs; (2) Data Dictionary; (3) Metrics; (4) Requirements Traceability Matrix; (5) Provide Oversight on SAPHIRE QA Activities; and (6) Support NRC Presentations and Meetings.

  7. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    option 3 or 510-486-8611 Home For Users Software Software Software on the NERSC computers includes the vendor-supplied operating systems and programming environments as well...

  8. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Software Computations Uncertainty Quantification Stochastic About CRF Transportation Energy Consortiums Engine Combustion Heavy Duty Heavy Duty Low-Temperature & Diesel Combustion ...

  9. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transportation Energy/Predictive Simulation of Engines/Reacting Flow/Applied Math & Software/Software Softwareadmin2015-10-30T02:00:39+00:00 The studies of mathematical methods and algorithms needed to computationally model reacting flows have in some instances involved the development of codes serving this and related purposes. Links to descriptions of these codes, some of which are available by download or other means, are provided here, along with brief explanations. A flexible

  10. ARM - Ingest Associated Status Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    common data format) datastream is generated: xxxmetFn.b1 xxxcmhFn.b1 aosingest Mentor: John Ogren, NOAA Lead Developer: Annette Koontz, PNNL Backup Developer: Brian Ermold, PNNL...

  11. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software NERSC/JGI Supported Software in Modules Package Category Version Module Install Date Date Made Default 7zip applications/ general 9.20.1 7zip/9.20.1 2013-01-14 2013-01-14 ABYSS applications/ bioinformatics 1.3.2 Abyss/1.3.2 2012-04-03 2012-04-03 ABySS applications/ bioinformatics 1.3.4 ABySS/1.3.4 2012-11-26 2012-11-26 ABySS applications/ bioinformatics 1.3.6 ABySS/1.3.6 2014-05-06 ABySS applications/ bioinformatics 1.5.0 ABySS/1.5.0 2014-05-06 ABySS applications/ bioinformatics 1.9.0

  12. ARM - Ingest Readiness Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field...

  13. ARM Climate Research Facility Third Quarter Ingest Report - 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 ARM Climate Research Facility Quarterly Ingest Status Report A Koontz C Sivaraman July 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not

  14. Status Report on the Development of Micro-Scheduling Software for the Advanced Outage Control Center Project

    SciTech Connect (OSTI)

    Shawn St. Germain; Kenneth Thomas; Ronald Farris; Jeffrey Joe

    2014-09-01

    The long-term viability of existing nuclear power plants (NPPs) in the United States (U.S.) is dependent upon a number of factors, including maintaining high capacity factors, maintaining nuclear safety, and reducing operating costs, particularly those associated with refueling outages. Refueling outages typically take 20-30 days, and for existing light water NPPs in the U.S., the reactor cannot be in operation during the outage. Furthermore, given that many NPPs generate between $1-1.5 million/day in revenue when in operation, there is considerable interest in shortening the length of refueling outages. Yet, refueling outages are highly complex operations, involving multiple concurrent and dependent activities that are difficult to coordinate. Finding ways to improve refueling outage performance while maintaining nuclear safety has proven to be difficult. The Advanced Outage Control Center project is a research and development (R&D) demonstration activity under the Light Water Reactor Sustainability (LWRS) Program. LWRS is a R&D program which works with industry R&D programs to establish technical foundations for the licensing and managing of long-term, safe, and economical operation of current NPPs. The Advanced Outage Control Center project has the goal of improving the management of commercial NPP refueling outages. To accomplish this goal, this INL R&D project is developing an advanced outage control center (OCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. This report describes specific recent efforts to develop a capability called outage Micro-Scheduling. Micro-Scheduling is the ability to allocate and schedule outage support task resources on a sub-hour basis. Micro-Scheduling is the real-time fine-tuning of the outage schedule to react to the actual progress of the primary outage activities to ensure that support task resources are optimally deployed with the least amount of delay and unproductive use of resources. The remaining sections of this report describe in more detail the scheduling challenges that occur during outages, how a Micro-Scheduling capability helps address those challenges, and provides a status update on work accomplished to date and the path forward.

  15. Live Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Queue Look Classic Queue Look Scheduled Outages Outage Log Science Gateway Status Login Node Status Filesystem Status My NERSC Getting Started Accounts & Allocations Cori Phase II Schedule Computational Systems Storage & File Systems Data & Analytics Connecting to NERSC Queues and Scheduling Job Logs & Statistics Application Performance Training & Tutorials Software Policies User Surveys NERSC Users Group User Announcements Help Staff Blogs Request Repository Mailing List

  16. ARM - Ingest Supporting Tools and Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field...

  17. NERSC Software Downloads

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Software Downloads HPSS Software Downloads Policies User Surveys NERSC Users Group User Announcements Help Staff Blogs Request Repository Mailing List Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home Ā» For Users Ā» Software Ā» NERSC Software Downloads

  18. Announcement of Computer Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    F 241.4 (10-01) (Replaces ESTSC F1 and ESTSC F2) All Other Editions Are Obsolete UNITED STATES DEPARTMENT OF ENERGY ANNOUNCEMENT OF COMPUTER SOFTWARE OMB Control Number 1910-1400 (OMB Burden Disclosure Statement is on last page of Instructions) Record Status (Select One): New Package Software Revision H. Description/Abstract PART I: STI SOFTWARE DESCRIPTION A. Software Title SHORT NAME OR ACRONYM KEYWORDS IN CONTEXT (KWIC) TITLE B. Developer(s) E-MAIL ADDRESS(ES) C. Site Product Number 1. DOE

  19. All Software List

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compilers Programming Models Version Control Tools Programming Libraries Performance and Debugging Tools Grid Software and Services NERSC Software Downloads Policies User Surveys NERSC Users Group User Announcements Help Staff Blogs Request Repository Mailing List Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov

  20. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File Storage Software and Tools Performance and Optimization Retirement Plans Jesup Dirac Edison Phase I Euclid - Retired 01/31/2013 Franklin - Retired 04/30/12 Bassi Storage & File Systems Data & Analytics Connecting to NERSC Queues and Scheduling Job Logs & Statistics Application Performance Training & Tutorials Software Policies User Surveys NERSC Users Group User Announcements Help Staff Blogs Request Repository Mailing List Operations for: Passwords & Off-Hours Status

  1. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Franklin Queues and Policies File storage and I/O Software and Tools Debugging and profiling Cray XT Documentation Franklin is Being Retired Bassi Storage & File Systems Data & Analytics Connecting to NERSC Queues and Scheduling Job Logs & Statistics Application Performance Training & Tutorials Software Policies User Surveys NERSC Users Group User Announcements Help Staff Blogs Request Repository Mailing List Operations for: Passwords & Off-Hours Status 1-800-66-NERSC,

  2. Protecting Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    your software outside of the Lab even if you only plan to share the software with other academic institutions, please contact us. How to Report: Complete the Software Disclosure...

  3. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management ...

  4. Tracker 300 Software

    Energy Science and Technology Software Center (OSTI)

    2006-01-12

    The Tracker300 software is downloaded to an off-the-shelf product called RCM3400/RCM3410 made by Rabbit Semiconductor. The software is a closed loop control which computes the sun's position and provides stability compensation. Using the RCM3400/RCM3410 module, the software stores and retrieves parameters from the onboard flash. The software also allows for communication with a host. It will allow the parameters to be downloaded or uploaded, it will show the status of the controller, it will providemoreĀ Ā» real-time feedback, and it will send command acknowledgements. The software will capture the GPS response and ensure the internal clock is set correctly.Ā«Ā less

  5. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 665-9090 Email The Richard P. Feynman Center for Innovation (FCI) releases copyright materials from Los Alamos under different mechanisms. Open Source Software GitHub Explore all open source

  6. Software Providers

    Broader source: Energy.gov [DOE]

    Software providers interested in linking their software to the Home Energy Scoring Tool can do so via an application programming interface (API). By licensing the Home Energy Score API, third-party...

  7. Fast Global File Status

    Energy Science and Technology Software Center (OSTI)

    2013-01-01

    Fast Global File Status (FGFS) is a system software package that implimints a scalable mechanism to retrieve file information, such as its degree of distribution or replication and consistency.

  8. Self-assembled software and method of overriding software execution

    DOE Patents [OSTI]

    Bouchard, Ann M.; Osbourn, Gordon C.

    2013-01-08

    A computer-implemented software self-assembled system and method for providing an external override and monitoring capability to dynamically self-assembling software containing machines that self-assemble execution sequences and data structures. The method provides an external override machine that can be introduced into a system of self-assembling machines while the machines are executing such that the functionality of the executing software can be changed or paused without stopping the code execution and modifying the existing code. Additionally, a monitoring machine can be introduced without stopping code execution that can monitor specified code execution functions by designated machines and communicate the status to an output device.

  9. Gemini Scout Control Software

    Energy Science and Technology Software Center (OSTI)

    2010-11-23

    The Gemini Scout Control Software consists of two Windows applications that allow the Gemini Scout vehicle to be controlled by an operator. The Embedded application runs on the vehicle's Gemini Scout Control Software onboard computer and controls the vehicle's various motors and sensors. This application reports the vehicle's status and receives vehicle commands overthe local-area-network. The Embedded applicationalso allows the user to control the vehicle using a USB game-pad connected directly to the vehicle. ThemoreĀ Ā» Operator Control Unit (OCU) application runs on an external PC and communicates with the vehicle via an Ethernet connection. The OCU application sends commands to and receives data from the Embedded application running on the vehicle. The OCU application also communicates directly with the digital video encoders and radios in order to display video from the vehicle's cameras and the status of the radio link. The OCU application has a graphical user interface (GUI) that displays the vehicle's status and allows the user to change various vehicle settings. Finally, the OCU application receives input from a USB game-pad connected to the PC in order to control the vehicle's functions.Ā«Ā less

  10. Software Developers

    Broader source: Energy.gov [DOE]

    Because SEED will provide a common, open-source data framework, software developers will be able to write applications that access the data in a consistent way (with proper permissions), or build functionalities onto the SEED platform in a replicable way.

  11. Live Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For Users Live Status Queue Look Classic Queue Look Scheduled Outages Outage Log Science Gateway Status Login Node Status Filesystem Status My NERSC Move to CRT Getting Started...

  12. Beam Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beam Status Beam Status Print Loading... You can also view the Operations Group's Beam History archives.

  13. Software Configuration Management (SCM) A Practical Guide | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy (SCM) A Practical Guide Software Configuration Management (SCM) A Practical Guide This document provides a practical guide for integrating software configuration management disciplines into the management of software engineering projects. Software configuration management is the process of identifying and defining the software configuration items in a system, controlling the release and change of these items throughout the system lifecycle, recording and reporting the status of

  14. PDSF Login Node Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PDSF Login Node Status Getting Started Hardware Configuration Using the PDSF Batch System Performance and Optimization Software and Tools Announcements and Meetings Cluster Statistics Getting help Group Pages Using Carver for PDSF jobs PDSF Completed Jobs Genepool Testbeds Retired Systems Storage & File Systems Data & Analytics Connecting to NERSC Queues and Scheduling Job Logs & Statistics Application Performance Training & Tutorials Software Policies User Surveys NERSC Users

  15. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made...

  16. System Management Software

    Energy Science and Technology Software Center (OSTI)

    2013-02-22

    MacPatch is Mac OS X system management software solution. It's used for patching, software distribution and inventory.

  17. Isolation and identification of apolar metabolites of ingested

    Office of Scientific and Technical Information (OSTI)

    20-hydroxyecdysone in frass of Heliothis virescens larvae (Journal Article) | SciTech Connect Isolation and identification of apolar metabolites of ingested 20-hydroxyecdysone in frass of Heliothis virescens larvae Citation Details In-Document Search Title: Isolation and identification of apolar metabolites of ingested 20-hydroxyecdysone in frass of Heliothis virescens larvae A large amount of 20-hydroxyecdysone was orally administered to larvae of the tobacco budworm, Heliothis virescens,

  18. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made Default Last edited: 2016-03-21 13:44:4

  19. Applied Math & Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Math & Software - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us ... Twitter Google + Vimeo GovDelivery SlideShare Applied Math & Software HomeTransportation ...

  20. Beam Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beam Status Print Loading... You can also view the Operations Group's Beam History archives

  1. Open Source Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Source Software Open Source Software All open source software available through the Laboratory is listed below. Contact thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 667-5844 Email For more information regarding how to access software from Los Alamos, contact the Software Team. brulilo, Version 0.x brulilo is a Python package for building and evolving thermonuclear reaction

  2. U.S. Dept. of Energy Announcement of Computer Software

    Energy Savers [EERE]

    ANNOUNCEMENT OF COMPUTER SOFTWARE Record Status (Select one): NEW PACKAGE SOFTWARE REVISION PART I: STI SOFTWARE DESCRIPTION A. Software Title SHORT NAME OR ACRONYM KEYWORDS IN CONTEXT B. Developer(s) E-MAIL ADDRESS(ES) C. Site Product Number 1. DOE CONTRACT/GRANT NUMBER(S) 2. R&D PROJECT ID(S) 3. SOFTWARE OR OTHER IDENTIFYING NUMBER(S) D. Originating Research Organization E. Release Date/Date of Issuance F. Sponsoring Organization G. Other (Information useful to include in published

  3. User' Software Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction...

  4. CDF THERORY SOFTWARE

    Energy Science and Technology Software Center (OSTI)

    003883WKSTN00 cDF Theory Software for mesoscopic modeling of equilibrium and transport phenomena  store.pnnl.gov 

  5. C# Software Title Software Description Date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Code (BLSCC), Version 1.x This software, written entirely in LabView, provides the command, control, and data acquisition capability for the BottleViz or CoilViz Bottle...

  6. Safesky Software | Open Energy Information

    Open Energy Info (EERE)

    Safesky Software Jump to: navigation, search Name: Safesky Software Place: Israel Product: Israel-based innovative technologies company References: Safesky Software1 This article...

  7. Elite Software | Open Energy Information

    Open Energy Info (EERE)

    Elite Software Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Elite Software AgencyCompany Organization: Elite Software Sector: Energy Focus Area: Buildings Phase:...

  8. Buffalo Software | Open Energy Information

    Open Energy Info (EERE)

    Software Jump to: navigation, search Logo: Buffalo Software Name: Buffalo Software Place: Broomfield Country: United States Zip: 80020 Region: Rockies Area Sector: Buildings...

  9. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Windows and Building Envelope Software Tools Software Tools See past projects. Fenestration Software Tools Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA

  10. Track 2 Commercial Grade Dedication of Software.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of other types of software - Instrumentation & control software - Software development Design and Analysis Software * Finite element analysis * Piping analysis * Seismic...

  11. Modules Software Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment Ā» Modules Environment Modules Software Environment NERSC uses the module utility to manage nearly all software. There are two huge advantages of the module approach: NERSC can provide many different versions and/or installations of a single software package on a given machine, including a default version as well as several older and newer versions; and Users can easily switch to different versions or installations without having to explicitly specify different paths. With modules,

  12. ESTSC - Software Best Practices

    Office of Scientific and Technical Information (OSTI)

    ... Provide a short summary of the mathematical methods, engineering principles, numerical algorithms, and procedures incorporated into the software. R Other Information useful to ...

  13. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Connecting to NERSC Queues and Scheduling Job Logs & Statistics Application Performance Training & Tutorials Software Policies User Surveys NERSC Users Group User Announcements...

  14. Software | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    models with broad-ranging applications, such as simulation and modeling, computation, Internet usage, and more. Argonne has both commercially available software and open-source...

  15. NPDF status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NPDF INSTRUMENT STATUS Waiting for runs .. Last update: Fri Mar 27 04:43:30 2015 NPDF RECENT DATA PLOTTING Select plot: GSAS - PDF

  16. SMARTS status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SMARTS INSTRUMENT STATUS Instrument Status (Last updated: 2016/03/02 14:04:07) Run Number: 97106 Title: Adams Sample 6-4 after heat treat to 1000C [abso strain -10.000 Run Status: ended Last Script Activity: 2016/02/28 20:05:52: End run 97106; mah 300000 abso strain -10.000 100.0 * * * * * * View full script Next Script Command: N/A Proposal#: 7039 Sample#: 2004061 MAH: 302227 Monitor: 132724 Beam Current: 0 Shutter Status: CLSD Used disk space on /home: 59% Used disk space on /disk2: 73% Crate

  17. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.22 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  18. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.21 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  19. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  20. Cathodoluminescence Spectrum Imaging Software

    Energy Science and Technology Software Center (OSTI)

    2011-04-07

    The software developed for spectrum imaging is applied to the analysis of the spectrum series generated by our cathodoluminescence instrumentation. This software provides advanced processing capabilities s such: reconstruction of photon intensity (resolved in energy) and photon energy maps, extraction of the spectrum from selected areas, quantitative imaging mode, pixel-to-pixel correlation spectrum line scans, ASCII, output, filling routines, drift correction, etc.

  1. Plating Tank Control Software

    Energy Science and Technology Software Center (OSTI)

    1998-03-01

    The Plating Tank Control Software is a graphical user interface that controls and records plating process conditions for plating in high aspect ratio channels that require use of low current and long times. The software is written for a Pentium II PC with an 8 channel data acquisition card, and the necessary shunt resistors for measuring currents in the millampere range.

  2. ACRO: Calculation of Organ Dose from Acute or Chronic Inhalation and Ingestion of

    Energy Science and Technology Software Center (OSTI)

    1982-02-01

    ACRO estimates the burden and dose to the organs or tissues as a result of inhalation or ingestion of radioactive materials.

  3. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management Checklist | Department of Energy SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist The following checklist is intended to provide system owners, project managers, configuration managers, and other information system development and maintenance professionals with guidance in identifying and planning software configuration management (SCM)

  4. Multiphase flow calculation software

    DOE Patents [OSTI]

    Fincke, James R.

    2003-04-15

    Multiphase flow calculation software and computer-readable media carrying computer executable instructions for calculating liquid and gas phase mass flow rates of high void fraction multiphase flows. The multiphase flow calculation software employs various given, or experimentally determined, parameters in conjunction with a plurality of pressure differentials of a multiphase flow, preferably supplied by a differential pressure flowmeter or the like, to determine liquid and gas phase mass flow rates of the high void fraction multiphase flows. Embodiments of the multiphase flow calculation software are suitable for use in a variety of applications, including real-time management and control of an object system.

  5. Software Carpentry Bootcamp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Carpentry Bootcamp Software Carpentry Bootcamp carpenter-tools.jpg Overview Do you spend too much time wrestling with computers and not enough doing research? If so, NERSC will be hosting a free two-day Software Carpentry Boot Camp on March 28-29 to introduce scientists to skills and tools that will allow them to use computing more efficiently. The workshop will cover the core skills a researcher needs to know in order to be productive in a small team, and will be followed by four to

  6. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Edison that is managed by modules. Package Category Version Module Install Date Date Made Default A Fortran interface to the GNU Scientific Library (GSL) libraries/ math 1.0.0 fgsl/1.0.0 2015-04-14 2015-04-14 ABINIT applications/ material sciences 7.0.5 abinit/7.0.5 2013-03-12 2013-03-12 ABINIT applications/ material sciences 7.10.2 abinit/7.10.2 2015-01-27 ABINIT applications/ material sciences 7.10.4

  7. Energy Modeling Software

    Broader source: Energy.gov [DOE]

    Information from energy simulation software is critical in the design of energy-efficient commercial buildings. The tools listed on this page are the product of Commercial Buildings Integration...

  8. Open Source Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL Go Suite The LANL Go Suite is a collection of packages, libraries, utilities, and software patches related to Google's Go programming language. The LANL Go Suite largely takes ...

  9. HOMERĀ® Energy Modeling Software

    Energy Science and Technology Software Center (OSTI)

    2000-12-31

    The HOMERĀ® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  10. Duty Cycle Software Model

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    The Software consists of code which is capable of processing a large volume of data to create a Ā“duty cycleĀ” which is representative of how equipment will function under certain conditions.

  11. Software Quality Assurance

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-10-02

    DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01. To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). Does not cancel other directives.

  12. Software Quality Assurance

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-10-02

    To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01.

  13. Public Key FPGA Software

    Energy Science and Technology Software Center (OSTI)

    2013-07-25

    The Public Key (PK) FPGA software performs asymmetric authentication using the 163-bit Elliptic Curve Digital Signature Algorithm (ECDSA) on an embedded FPGA platform. A digital signature is created on user-supplied data, and communication with a host system is performed via a Serial Peripheral Interface (SPI) bus. Software includes all components necessary for signing, including custom random number generator for key creation and SHA-256 for data hashing.

  14. LIGA Scanner Control Software

    Energy Science and Technology Software Center (OSTI)

    1999-02-01

    The LIGA Scanner Software is a graphical user interface package that facilitates controlling the scanning operation of x-rays from a synchrotron and sample manipulation for making LIGA parts. The process requires scanning of the LIGA mask and the PMMA resist through a stationary x-ray beam to provide an evenly distributed x-ray exposure over the wafer. This software package has been written specifically to interface with Aerotech motor controllers.

  15. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Hopper, Cray XE6 Carver Jesup Dirac Edison Phase I Euclid - Retired 01/31/2013 Franklin - Retired 04/30/12 Bassi Storage & File Systems Data & Analytics Connecting to NERSC Queues and Scheduling Job Logs & Statistics Application Performance Training & Tutorials Software Policies User Surveys NERSC Users Group User Announcements Help Staff

  16. SHM Data Sets and Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHM Data Sets and Software SHM Data Sets and Software SHM Data Sets and Software Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI Director Michael Todd (858) ...

  17. software | OpenEI Community

    Open Energy Info (EERE)

    software Home Future of Condition Monitoring for Wind Turbines Description: Research into third party software to aid in the development of better CMS in order to raise turbine...

  18. Aclara Software | Open Energy Information

    Open Energy Info (EERE)

    Aclara Software Jump to: navigation, search Name: Aclara Software Address: 16 Laurel Avenue Place: Wellesley, Massachusetts Zip: 02481 Region: Greater Boston Area Sector:...

  19. Fenestration Software Tools

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    dccurcija@lbl.gov Lawrence Berkeley National Laboratory Fenestration Software Tools 2014 Building Technologies Office Peer Review 2 Project Summary Timeline: Start date: 10/1/2013 (longer term effort through different projects in the past) Planned end date: 9/30/2018 Key Milestones 1. Released version of the next generation of fenestration software tools 2. Addition of full set of models for cellular shades and pleated shades Budget: Total DOE $ to date: $265k Total future DOE $: $2,000k Key

  20. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Software and Tools Chos Chos is used to select your operating system at PDSF. Read More Ā» Modules Module is a system which you can use to specify what software you want to use... Read More Ā» Project Accounts You can use a shared project account to facilitate collaboration... Read More Ā» Checking Quotas To check your quotas use the myquota command... Read More Ā» Accelerating Remote X Performance You can use NX to greatly improve the performance of X window applications. Read More Ā»

  1. Electronic Status Board

    Energy Science and Technology Software Center (OSTI)

    2004-06-02

    This software was developed to post real-time process status and building conditions to operators, system engineers, system managers, and all support personnel. Data input is via operator console, strategically located throughout the facility, or by electronic rounds tablet. The system requires a person to log in with a unique user id and password to edit data. Viewing system status does not require log in and can be done from any desktop location running FileMaker. OncemoreĀ Ā» logged into the system, all new records saved are stamped with date, time and user name, and a historical copy is created that can be brought up to review status. There is no limitation to the amount of records that can be saved in the historical databases. The system will flag all out of limit conditions on the screen and enter that record on a turnover summery page which displays only flagged items. System conditions are displayed on a plasma display which scrolls through the various system condition screens. The system also shows floor plans that reflect specific building radiological conditions which aides in pre job briefings to show all hazards to personnel entering specific locations. The input screen is displayed on a second standard computer monitor connected to the input PC. There are several popup screens that require user intervention to ensure that the user wants to edit the data, is editing the appropriate sytem, and if they want to continue to stay logged into the system. Each workstation is connected to a Uninterrupted Power Supply which will shut each system down safely in a power failure. The server is configured to print out current status upon notification from the UPS that power has failed. The system also has a video input card which is connected to a DVD/VCR which shows safety meetings, and images taken from a digital camera used to show specific locations/items for pre-job briefings.Ā«Ā less

  2. JSATS Decoder Software Manual

    SciTech Connect (OSTI)

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ā€˜real-timeā€™ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  3. Self-assembling software generator

    DOE Patents [OSTI]

    Bouchard, Ann M.; Osbourn, Gordon C.

    2011-11-25

    A technique to generate an executable task includes inspecting a task specification data structure to determine what software entities are to be generated to create the executable task, inspecting the task specification data structure to determine how the software entities will be linked after generating the software entities, inspecting the task specification data structure to determine logic to be executed by the software entities, and generating the software entities to create the executable task.

  4. Status | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Status Status PDF icon Status More Documents & Publications DOE O 206.2 Identity, Credential, and Access Management (ICAM) ICAM Workshop Audit Report: IG-0860

  5. Enhancing Seismic Calibration Research Through Software Automation and Scientific Information Management

    SciTech Connect (OSTI)

    Ruppert, S D; Dodge, D A; Ganzberger, M D; Harris, D B; Hauk, T F

    2009-07-07

    The National Nuclear Security Administration (NNSA) Ground-Based Nuclear Explosion Monitoring Research and Development (GNEMRD) Program at LLNL continues to make significant progress enhancing the process of deriving seismic calibrations and performing scientific integration, analysis, and information management with software automation tools. Our tool efforts address the problematic issues of very large datasets and varied formats encountered during seismic calibration research. New information management and analysis tools have resulted in demonstrated gains in efficiency of producing scientific data products and improved accuracy of derived seismic calibrations. In contrast to previous years, software development work this past year has emphasized development of automation at the data ingestion level. This change reflects a gradually-changing emphasis in our program from processing a few large data sets that result in a single integrated delivery, to processing many different data sets from a variety of sources. The increase in the number of sources had resulted in a large increase in the amount of metadata relative to the final volume of research products. Software developed this year addresses the problems of: (1) Efficient metadata ingestion and conflict resolution; (2) Automated ingestion of bulletin information; (3) Automated ingestion of waveform information from global data centers; and (4) Site Metadata and Response transformation required for certain products. This year, we also made a significant step forward in meeting a long-standing goal of developing and using a waveform correlation framework. Our objective for such a framework is to extract additional calibration data (e.g. mining blasts) and to study the extent to which correlated seismicity can be found in global and regional scale environments.

  6. Unified Parallel Software

    Energy Science and Technology Software Center (OSTI)

    2003-12-01

    UPS (Unified Paralled Software is a collection of software tools libraries, scripts, executables) that assist in parallel programming. This consists of: o libups.a C/Fortran callable routines for message passing (utilities written on top of MPI) and file IO (utilities written on top of HDF). o libuserd-HDF.so EnSight user-defined reader for visualizing data files written with UPS File IO. o ups_libuserd_query, ups_libuserd_prep.pl, ups_libuserd_script.pl Executables/scripts to get information from data files and to simplify the use ofmoreĀ Ā» EnSight on those data files. o ups_io_rm/ups_io_cp Manipulate data files written with UPS File IO These tools are portable to a wide variety of Unix platforms.Ā«Ā less

  7. TOUGH2 software qualification

    SciTech Connect (OSTI)

    Pruess, K.; Simmons, A.; Wu, Y.S.; Moridis, G.

    1996-02-01

    TOUGH2 is a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media. It belongs to the MULKOM ({open_quotes}MULti-KOMponent{close_quotes}) family of codes and is a more general version of the TOUGH simulator. The MULKOM family of codes was originally developed with a focus on geothermal reservoir simulation. They are suited to modeling systems which contain different fluid mixtures, with applications to flow problems arising in the context of high-level nuclear waste isolation, oil and gas recovery and storage, and groundwater resource protection. TOUGH2 is essentially a subset of MULKOM, consisting of a selection of the better tested and documented MULKOM program modules. The purpose of this package of reports is to provide all software baseline documents necessary for the software qualification of TOUGH2.

  8. CACTUS Software Download

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CACTUS Software Download - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  9. Applied Math & Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Math & Software - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  10. Weekly Petroleum Status Report

    Gasoline and Diesel Fuel Update (EIA)

    Please go to the redesigned Weekly Petroleum Status Report.

  11. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tools Software Tools AMO's tools help manufacturers increase industrial energy efficiency at the plant-level and in specific systems. Learn step-by-step ways to identify ...

  12. Tevatron status

    SciTech Connect (OSTI)

    Dugan, G.

    1989-03-01

    The Fermilab Tevatron is both the world's highest energy accelerator system and first large-scale superconducting synchrotron. Since Tevatron commissioning in July 1983, the accelerator has operated in 1984, 1985 and 1987 with extracted beams of 800 GeV for three runs of fixed target physics, and in 1987, and 1988, with proton-antiproton colliding beams at 900 /times/ 900 GeV. This paper will focus on the collider operation of the Tevatron: its present status and the outlook for its longer-term future evolution. 18 refs., 3 figs., 2 tabs.

  13. BG/Q Drivers Status | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blue Gene/Q Versus Blue Gene/P BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] BG/Q Drivers Status The status of

  14. Software Verification and Validation Procedure

    SciTech Connect (OSTI)

    Olund, Thomas S.

    2008-09-15

    This Software Verification and Validation procedure provides the action steps for the Tank Waste Information Network System (TWINS) testing process. The primary objective of the testing process is to provide assurance that the software functions as intended, and meets the requirements specified by the client. Verification and validation establish the primary basis for TWINS software product acceptance.

  15. Intelligent Software Agents: Sensor Integration and Response

    SciTech Connect (OSTI)

    Kulesz, James J; Lee, Ronald W

    2013-01-01

    Abstract In a post Macondo world the buzzwords are Integrity Management and Incident Response Management. The twin processes are not new but the opportunity to link the two is novel. Intelligent software agents can be used with sensor networks in distributed and centralized computing systems to enhance real-time monitoring of system integrity as well as manage the follow-on incident response to changing, and potentially hazardous, environmental conditions. The software components are embedded at the sensor network nodes in surveillance systems used for monitoring unusual events. When an event occurs, the software agents establish a new concept of operation at the sensing node, post the event status to a blackboard for software agents at other nodes to see , and then react quickly and efficiently to monitor the scale of the event. The technology addresses a current challenge in sensor networks that prevents a rapid and efficient response when a sensor measurement indicates that an event has occurred. By using intelligent software agents - which can be stationary or mobile, interact socially, and adapt to changing situations - the technology offers features that are particularly important when systems need to adapt to active circumstances. For example, when a release is detected, the local software agent collaborates with other agents at the node to exercise the appropriate operation, such as: targeted detection, increased detection frequency, decreased detection frequency for other non-alarming sensors, and determination of environmental conditions so that adjacent nodes can be informed that an event is occurring and when it will arrive. The software agents at the nodes can also post the data in a targeted manner, so that agents at other nodes and the command center can exercise appropriate operations to recalibrate the overall sensor network and associated intelligence systems. The paper describes the concepts and provides examples of real-world implementations including the Threat Detection and Analysis System (TDAS) at the International Port of Memphis and the Biological Warning and Incident Characterization System (BWIC) Environmental Monitoring (EM) Component. Technologies developed for these 24/7 operational systems have applications for improved real-time system integrity awareness as well as provide incident response (as needed) for production and field applications.

  16. Master Software License Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GE Global Research Software Commercial Off the Shelf (COTS) License Terms and Conditions (01/2011) This Agreement (also referred to as "Order") is made by Licensor, a company whose address and primary contact information are contained on the face of the GE purchase order ("Order Document") to which these terms apply, and General Electric Company, a company organized and existing under the laws of the State of New York, U.S.A., and acting through its GE Global Research

  17. Nexus Energy Software Inc | Open Energy Information

    Open Energy Info (EERE)

    Nexus Energy Software Inc Jump to: navigation, search Name: Nexus Energy Software Inc Place: Wellesley, Massachusetts Zip: 2481 Product: Nexus Energy Software is a provider of...

  18. ESP Environmental Software Providers | Open Energy Information

    Open Energy Info (EERE)

    ESP Environmental Software Providers Jump to: navigation, search Name: ESP (Environmental Software Providers) Place: California Zip: CA 94041 Product: ESP(tm)s software...

  19. Wrapper Induction Software

    SciTech Connect (OSTI)

    2011-08-18

    Wrapper Induction is a software package that allows for unsupervised, semi-supervised, and manual extraction of social media data independent of language or site architecture. A large range of blog formats is available to individuals as means of publishing data to the internet. Blogs are a source of rich information for analysts. With a growing volume of information and blog engines, there is an increased need for automatic or semi-automatic extraction of that data for processing to help deliver results to analysts. Wrapper Induction is designed to automatically or semi-automatically create a template that can be used to harvest blog data from websites. Blogs are in a variety of formats and languages. Wrapper Induction creates a template and extracts blog data in a way that is independent of a specified blog format or language.

  20. Wrapper Induction Software

    Energy Science and Technology Software Center (OSTI)

    2011-08-18

    Wrapper Induction is a software package that allows for unsupervised, semi-supervised, and manual extraction of social media data independent of language or site architecture. A large range of blog formats is available to individuals as means of publishing data to the internet. Blogs are a source of rich information for analysts. With a growing volume of information and blog engines, there is an increased need for automatic or semi-automatic extraction of that data for processingmoreĀ Ā» to help deliver results to analysts. Wrapper Induction is designed to automatically or semi-automatically create a template that can be used to harvest blog data from websites. Blogs are in a variety of formats and languages. Wrapper Induction creates a template and extracts blog data in a way that is independent of a specified blog format or language.Ā«Ā less

  1. Energy Tracking Software Platform

    SciTech Connect (OSTI)

    Ryan Davis; Nathan Bird; Rebecca Birx; Hal Knowles

    2011-04-04

    Acceleration has created an interactive energy tracking and visualization platform that supports decreasing electric, water, and gas usage. Homeowners have access to tools that allow them to gauge their use and track progress toward a smaller energy footprint. Real estate agents have access to consumption data, allowing for sharing a comparison with potential home buyers. Home builders have the opportunity to compare their neighborhood's energy efficiency with competitors. Home energy raters have a tool for gauging the progress of their clients after efficiency changes. And, social groups are able to help encourage members to reduce their energy bills and help their environment. EnergyIT.com is the business umbrella for all energy tracking solutions and is designed to provide information about our energy tracking software and promote sales. CompareAndConserve.com (Gainesville-Green.com) helps homeowners conserve energy through education and competition. ToolsForTenants.com helps renters factor energy usage into their housing decisions.

  2. Estimating baseline risks from biouptake and food ingestion at a contaminated site

    SciTech Connect (OSTI)

    MacDonell, M.; Woytowich, K.; Blunt, D.; Picel, M.

    1993-11-01

    Biouptake of contaminants and subsequent human exposure via food ingestion represents a public concern at many contaminated sites. Site-specific measurements from plant and animal studies are usually quite limited, so this exposure pathway is often modeled to assess the potential for adverse health effects. A modeling tool was applied to evaluate baseline risks at a contaminated site in Missouri, and the results were used to confirm that ingestion of fish and game animals from the site area do not pose a human health threat. Results were also used to support the development of cleanup criteria for site soil.

  3. SAVANNAH RIVER SITE CAPABILITIES FOR CONDUCTING INGESTION PATHWAY CONSEQUENCE ASSESSMENTS FOR EMERGENCY RESPONSE

    SciTech Connect (OSTI)

    Hunter, C

    2007-12-11

    Potential airborne releases of radioactivity from facilities operated for the U. S. Department of Energy at the Savannah River Site could pose significant consequences to the public through the ingestion pathway. The Savannah River National Laboratory has developed a suite of technologies needed to conduct assessments of ingestion dose during emergency response, enabling emergency manager at SRS to develop initial protective action recommendation for state agencies early in the response and to make informed decisions on activation of additional Federal assets that would be needed to support long-term monitoring and assessment activities.

  4. Electronic Records Management Software Applications Design Criteria...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electronic Records Management Software Applications Design Criteria Standard Electronic Records Management Software Applications Design Criteria Standard This Standard is reissued ...

  5. Software-Defined Networking (SDN)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ENOS Experimental Network Testbeds Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home Ā» Network R&D Ā» Software-Defined Networking (SDN) Network R&D Software-Defined Networking (SDN) ENOS Experimental

  6. Software and High Performance Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and High Performance Computing Software and High Performance Computing Providing world-class high performance computing capability that enables unsurpassed solutions to complex problems of strategic national interest Contact thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 667-5844 Email Software Computational physics, computer science, applied mathematics, statistics and the

  7. AIRMaster+ Software | Open Energy Information

    Open Energy Info (EERE)

    Policies: Deployment Programs DeploymentPrograms: Technical Assistance AIRMaster+ is a free online software tool that helps users analyse energy use and savings opportunities in...

  8. More Mac software and connections

    SciTech Connect (OSTI)

    Busbey, A.B.

    1988-11-01

    This column briefly reviews several geologic software packaged designed for Apple Macintosh. In addition, it discusses methods of networking Apple Macintosh computers.

  9. SUNREL Software - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search SUNREL Software An energy simulation program to aid ... Contact NREL About This Technology Technology Marketing Summary Historically, building ...

  10. Software & Downloads | Open Energy Information

    Open Energy Info (EERE)

    Wind Industry Careers Skystream 3.7 Downloads These resources require a Windows computer. Skyview is the manufacturer-provided wind turbine communication software. It is...

  11. HMX Cooling Core Optimization Software

    Energy Science and Technology Software Center (OSTI)

    2006-08-31

    The Software consists of code which is used to determine the optimal configuration of an HMX cooling core in a heat exchanger.

  12. NIF Status Update - 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    status NIF Status Update - 2014 May - Highlights of May Experiments on NIF Gigabar Equation-of-State Experiments Production of Beryllium Capsules for NIF Begins First Weekly...

  13. Parallel time integration software

    Energy Science and Technology Software Center (OSTI)

    2014-07-01

    This package implements an optimal-scaling multigrid solver for the (non) linear systems that arise from the discretization of problems with evolutionary behavior. Typically, solution algorithms for evolution equations are based on a time-marching approach, solving sequentially for one time step after the other. Parallelism in these traditional time-integrarion techniques is limited to spatial parallelism. However, current trends in computer architectures are leading twards system with more, but not faster. processors. Therefore, faster compute speeds mustmoreĀ Ā» come from greater parallelism. One approach to achieve parallelism in time is with multigrid, but extending classical multigrid methods for elliptic poerators to this setting is a significant achievement. In this software, we implement a non-intrusive, optimal-scaling time-parallel method based on multigrid reduction techniques. The examples in the package demonstrate optimality of our multigrid-reduction-in-time algorithm (MGRIT) for solving a variety of parabolic equations in two and three sparial dimensions. These examples can also be used to show that MGRIT can achieve significant speedup in comparison to sequential time marching on modern architectures.Ā«Ā less

  14. Records Inventory Data Collection Software

    Energy Science and Technology Software Center (OSTI)

    1995-03-01

    DATALINK was created to provide an easy to use data collection program for records management software products. It provides several useful tools for capturing and validating record index data in the field. It also allows users to easily create a comma delimited, ASCII text file for data export into most records management software products.

  15. X-Ray Analysis Software

    Energy Science and Technology Software Center (OSTI)

    2007-03-09

    XRAYS is a suite of prgrams related to scientific software in general and exray and neutron scattering problems in particular. It is expected to bean ongoing progam involving collaboration with other facilities. It is expected to include legacy and other existing software as well as new applications and new interfaces for existing applications.

  16. EDS operator and control software

    SciTech Connect (OSTI)

    Ott, L.L.

    1985-04-01

    The Enrichment Diagnostic System (EDS) was developed at Lawrence Livermore National Laboratory (LLNL) to acquire, display and analyze large quantities of transient data for a real-time Advanced Vapor Laser Isotope Separation (AVLIS) experiment. Major topics discussed in this paper are the EDS operator interface (SHELL) program, the data acquisition and analysis scheduling software, and the graphics software. The workstation concept used in EDS, the software used to configure a user's workstation, and the ownership and management of a diagnostic are described. An EDS diagnostic is a combination of hardware and software designed to study specific aspects of the process. Overall system performance is discussed from the standpoint of scheduling techniques, evaluation tools, optimization techniques, and program-to-program communication methods. EDS is based on a data driven design which keeps the need to modify software to a minimum. This design requires a fast and reliable data base management system. A third party data base management product, Berkeley Software System Database, written explicitly for HP1000's, is used for all EDS data bases. All graphics is done with an in-house graphics product, Device Independent Graphics Library (DIGLIB). Examples of devices supported by DIGLIB are: Versatec printer/plotters, Raster Technologies Graphic Display Controllers, and HP terminals (HP264x and HP262x). The benefits derived by using HP hardware and software as well as obstacles imposed by the HP environment are presented in relation to EDS development and implementation.

  17. RELAP-7 SOFTWARE VERIFICATION AND VALIDATION PLAN

    SciTech Connect (OSTI)

    Smith, Curtis L; Choi, Yong-Joon; Zou, Ling

    2014-09-01

    This INL plan comprehensively describes the software for RELAP-7 and documents the software, interface, and software design requirements for the application. The plan also describes the testing-based software verification and validation (SV&V) processā€”a set of specially designed software models used to test RELAP-7.

  18. HOMERĀ® Energy Modeling Software 2003

    Energy Science and Technology Software Center (OSTI)

    2003-12-31

    The HOMERĀ® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  19. DC Pro Software Tool Suite

    SciTech Connect (OSTI)

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  20. Confined Space Imager (CSI) Software

    Energy Science and Technology Software Center (OSTI)

    2013-07-03

    The software provides real-time image capture, enhancement, and display, and sensor control for the Confined Space Imager (CSI) sensor system The software captures images over a Cameralink connection and provides the following image enhancements: camera pixel to pixel non-uniformity correction, optical distortion correction, image registration and averaging, and illumination non-uniformity correction. The software communicates with the custom CSI hardware over USB to control sensor parameters and is capable of saving enhanced sensor images to anmoreĀ Ā» external USB drive. The software provides sensor control, image capture, enhancement, and display for the CSI sensor system. It is designed to work with the custom hardware.Ā«Ā less

  1. Managing risk in software systems

    SciTech Connect (OSTI)

    Fletcher, S.K.; Jansma, R.M.; Murphy, M.D.

    1995-07-01

    A methodology for risk management in the design of software systems is presented. It spans security, safety, and correct operation of software within the context of its environment, and produces a risk analysis and documented risk management strategy. It is designed to be iteratively applied, to attain appropriate levels of detail throughout the analysis. The methodology and supporting tools are discussed. The methodology is critiqued relative to other research in the field. Some sample applications of the methodology are presented.

  2. Pybus -- A Python Software Bus

    SciTech Connect (OSTI)

    Lavrijsen, Wim T.L.P.

    2004-10-14

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer of component support. This functionality can be presented to the developer in the form of a module, making it very easy to use. This paper describes a Pythonmodule, PyBus, with which the concept of a ''software bus'' can be realized in Python. It demonstrates, within the context of the ATLAS software framework Athena, how PyBus can be used for the installation and (run-time) configuration of software, not necessarily Python modules, from a Python application in a way that is transparent to the end-user.

  3. AIRMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tool Brochure AIRMaster+ Software Tool Brochure Brochure that provides information on AMO's AIRMaster+ software tool, including how it works, next steps, and how to access the tool. PDF icon AIRMaster+ Brochure

  4. Software Configuration Management Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plan Software Configuration Management Plan This template is used for documenting the ... a systems development project PDF icon Software Configuration Management Plan More ...

  5. Hara Software Inc | Open Energy Information

    Open Energy Info (EERE)

    Software Inc Jump to: navigation, search Name: Hara Software Inc Place: Menlo Park, California Zip: 94025 Product: California-based venture capital funded developer of energy and...

  6. SAPHIRE 8 Software Acceptance Test Plan

    SciTech Connect (OSTI)

    Ted S. Wood; Curtis L. Smith

    2009-07-01

    This document describe & report the overall SAPHIRE 8 Software acceptance test paln to offically release the SAPHIRE version 8 software to the NRC custoer for distribution.

  7. Software Engineer (CODAC) | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Engineer (CODAC) Department: Information Technology Supervisor(s): Bill Davis ... This Software Engineer position is with the CODAC group, responsible for the development ...

  8. Open Source Software | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Source Software TDC encourages Argonne authors to post on the GitHub platform to facilitate transfer of open source software....

  9. Software Complexity Threatens Performance Portability

    SciTech Connect (OSTI)

    Gamblin, T.

    2015-09-11

    Modern HPC software packages are rarely self-contained. They depend on a large number of external libraries, and many spend large fractions of their runtime in external subroutines. Performance portability depends not only on the effort of application teams, but also on the availability of well-tuned libraries. At most sites, the burden of maintaining libraries is shared by code teams and facilities. Facilities typically provide well-tuned default versions, but code teams frequently build with bleeding-edge compilers to achieve high performance. For this reason, HPC has no ā€œstandardā€ software stack, unlike other domains where performance is not critical. Incompatibilities among compilers and software versions force application teams and facility staff to re-build custom versions of libraries for each new toolchain. Because the number of potential configurations is combinatorial, and because HPC software is notoriously difficult to port to new machines [3, 7, 8], the tuning effort required to support and maintain performance-portable libraries outstrips the available manpower at most sites. Software complexity is a growing obstacle to performance portability for HPC.

  10. Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status Updates and Status Current Status: Up Carver Email Announcements Archive An archive of email announcements sent to NERSC users regarding Carver. Read More Ā» Timeline Timeline of significant Carver events. Read More Ā» Last edited: 2016-04-29 11:34:35

  11. Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status Updates and Status Current Status: Up Announcements All recent NERSC announcements affecting Euclid. Read More Ā» Email Announcements Archive An archive of email announcements sent to NERSC users regarding Euclid. Read More Ā» Known Problems All known current problems with Euclid. Read More Ā» Timeline Timeline of significant Euclid events. Read More Ā» Last edited: 2016-04-29 11:34:40

  12. Software/firmware design specification for 10-MWe solar-thermal central-receiver pilot plant

    SciTech Connect (OSTI)

    Ladewig, T.D.

    1981-03-01

    The software and firmware employed for the operation of the Barstow Solar Pilot Plant are completely described. The systems allow operator control of up to 2048 heliostats, and include the capability of operator-commanded control, graphic displays, status displays, alarm generation, system redundancy, and interfaces to the Operational Control System, the Data Acquisition System, and the Beam Characterization System. The requirements are decomposed into eleven software modules for execution in the Heliostat Array Controller computer, one firmware module for execution in the Heliostat Field Controller microprocessor, and one firmware module for execution in the Heliostat Controller microprocessor. The design of the modules to satisfy requirements, the interfaces between the computers, the software system structure, and the computers in which the software and firmware will execute are detailed. The testing sequence for validation of the software/firmware is described. (LEW)

  13. ARM TR-008

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 ACRF Ingest Software Status: New, Current, and Future February 2007 Annette Koontz, for ACRF Engineering Management Pacific Northwest National Laboratory PNNL Ingest Developers: Sutanay Choudhury Brian Ermold Krista Gaustad Annette Koontz Work supported by the U. S. Department of Energy, Office of Science, Office of Biological and Environmental Research February 2007, DOE/SC-ARM/P-07-004.1 Introduction The purpose of this report is to provide status of the ingest software used to process

  14. Heuristic status polling

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.; Heidelberger, Philip; Kumar, Sameer; Parker, Jeffrey J.; Ratterman, Joseph D.

    2011-06-07

    Methods, compute nodes, and computer program products are provided for heuristic status polling of a component in a computing system. Embodiments include receiving, by a polling module from a requesting application, a status request requesting status of a component; determining, by the polling module, whether an activity history for the component satisfies heuristic polling criteria; polling, by the polling module, the component for status if the activity history for the component satisfies the heuristic polling criteria; and not polling, by the polling module, the component for status if the activity history for the component does not satisfy the heuristic criteria.

  15. GridOPTICS Software System

    Energy Science and Technology Software Center (OSTI)

    2014-02-24

    GridOPTICS Software System (GOSS) is a middleware that facilitates creation of new, modular and flexible operational and planning platforms that can meet the challenges of the next generation power grid. GOSS enables Department of Energy, power system utilities, and vendors to build better tools faster. GOSS makes it possible to integrate Future Power Grid Initiative software products/prototypes into existing power grid software systems, including the PNNL PowerNet and EIOC environments. GOSS is designed to allowmoreĀ Ā» power grid applications developed for different underlying software platforms installed in different utilities to communicate with ease. This can be done in compliance with existing security and data sharing policies between the utilities. GOSS not only supports one-to-one data transfer between applications, but also publisher/subscriber scheme. To support interoperability requirements of future EMS, GOSS is designed for CIM compliance. In addition to this, it supports authentication and authorization capabilities to protect the system from cyber threats. In summary, the contributions of the GOSS middleware are as follows: Ā• A platform to support future EMS development. Ā• A middleware that promotes interoperability between power grid applications. Ā• A distributed architecture that separates data sources from power grid applications. Ā• Support for data exchange with either one-to-one or publisher/subscriber interfaces. Ā• An authentication and authorization scheme for limiting the access to data between utilities.Ā«Ā less

  16. Human factors in software development

    SciTech Connect (OSTI)

    Curtis, B.

    1986-01-01

    This book presents an overview of ergonomics/human factors in software development, recent research, and classic papers. Articles are drawn from the following areas of psychological research on programming: cognitive ergonomics, cognitive psychology, and psycholinguistics. Topics examined include: theoretical models of how programmers solve technical problems, the characteristics of programming languages, specification formats in behavioral research and psychological aspects of fault diagnosis.

  17. Field Deployable Tritium Assay System Host Graphical User Interface Software

    Energy Science and Technology Software Center (OSTI)

    1998-05-12

    The FDTASHOST software is a Graphical User Interface for the Field Deployable Tritium Assay System (FDTAS - Invention Disclosure SRS-96-09-091 has been submitted). The program runs on the Host computer which is located in the Laboratory and connected to the FDTAS remote field system via a modem over a phone line. The operator receives status information and messages from the Remote system. The operator can enter in commands to be executed by the remote systemmoreĀ Ā» using the mouse and a pull down menu.Ā«Ā less

  18. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Energy.gov Ā» Web Policies Ā» Social Media Social Media The Department of Energy is committed to expanding the conversation on energy issues and upholding open government principles of transparency, participation and collaboration. One of the key ways we seek to accomplish this is through the use of social media. "Social media" is a broad term for a wide spectrum of interactive and user-driven content technologies, including social networks like Twitter, Facebook, YouTube and

  19. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Evaluation and Test Suite coNCePTuaL -- A Network Correctness and Performance Testing Language db, Version 0.2.x FEHM (Finite Element Heat and Mass Transfer Code) Genome...

  20. Proceedings of the Fifth Triennial Software Quality Forum 2000, Software for the Next Millennium, Software Quality Forum

    SciTech Connect (OSTI)

    Scientific Software Engineering Group, CIC-12

    2000-04-01

    The Software Quality Forum is a triennial conference held by the Software Quality Assurance Subcommittee for the Department of Energy's Quality Managers. The forum centers on key issues, information, and technology important in software development for the Nuclear Weapons Complex. This year it will be opened up to include local information technology companies and software vendors presenting their solutions, ideas, and lessons learned. The Software Quality Forum 2000 will take on a more hands-on, instructional tone than those previously held. There will be an emphasis on providing information, tools, and resources to assist developers in their goal of producing next generation software.

  1. Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status Updates and Status Current Status: Up See the MOTD for live up to date information on NERSC systems Open Issues List of known problems and key issues we are actively working on. Read More Ā» Genepool Featured Announcements A list of key Genepool announcements and system changes. Read More Ā» Genepool Email Announcements Archive An archive of email announcements sent to NERSC users regarding Genepool. Read More Ā» Announcements Move data from /projectb/projectdirs 5 March 2014, 3:13 pm

  2. Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status Updates and Status Current Status: Retired on April 30, 2012 Announcements A list of key Franklin announcements and system changes. Read More Ā» Email Announcements Archive An archive of email announcements sent to NERSC users regarding Franklin. Read More Ā» Franklin Timeline This page records a brief timeline of significant events and user environment changes on Franklin. Read More Ā» Last edited: 2016-04-29 11:34:24

  3. Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status Updates and Status Current Status: Up Open Issues List of known problems, submitted bug reports and issues we are actively working on. Read More Ā» Hopper Featured Announcements A list of key Hopper announcements and system changes. Read More Ā» Hopper Email Announcements Archive An archive of email announcements sent to NERSC users regarding Hopper. Read More Ā» Announcements Hopper OS upgrade and new SW set to default next Wed, Feb 27 21 February 2013, 10:29 am Hopper scheduled

  4. Remotely Monitored Sealing Array Software

    SciTech Connect (OSTI)

    2012-09-12

    The Remotely Monitored Sealing Array (RMSA) utilizes the Secure Sensor Platform (SSP) framework to establish the fundamental operating capabilities for communication, security, power management, and cryptography. In addition to the SSP framework the RMSA software has unique capabilities to support monitoring a fiber optic seal. Fiber monitoring includes open and closed as well as parametric monitoring to detect tampering attacks. The fiber monitoring techniques, using the SSP power management processes, allow the seals to last for years while maintaining the security requirements of the monitoring application. The seal is enclosed in a tamper resistant housing with software to support active tamper monitoring. New features include LED notification of fiber closure, the ability to retrieve the entire fiber optic history via translator command, separate memory storage for fiber optic events, and a more robust method for tracking and resending failed messages.

  5. Roadmap for Peridynamic Software Implementation

    SciTech Connect (OSTI)

    Littlewood, David John

    2015-10-01

    The application of peridynamics for engineering analysis requires an efficient and robust software implementation. Key elements include processing of the discretization, the proximity search for identification of pairwise interactions, evaluation of the con- stitutive model, application of a bond-damage law, and contact modeling. Additional requirements may arise from the choice of time integration scheme, for example esti- mation of the maximum stable time step for explicit schemes, and construction of the tangent stiffness matrix for many implicit approaches. This report summaries progress to date on the software implementation of the peridynamic theory of solid mechanics. Discussion is focused on parallel implementation of the meshfree discretization scheme of Silling and Askari [33] in three dimensions, although much of the discussion applies to computational peridynamics in general.

  6. Component Modeling Approach Software Tool

    SciTech Connect (OSTI)

    2010-08-23

    The Component Modeling Approach Software Tool (CMAST) establishes a set of performance libraries of approved components (frames, glass, and spacer) which can be accessed for configuring fenestration products for a project, and btaining a U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) rating for those products, which can then be reflected in a CMA Label Certificate for code compliance. CMAST is web-based as well as client-based. The completed CMA program and software tool will be useful in several ways for a vast array of stakeholders in the industry: Generating performance ratings for bidding projects Ascertaining credible and accurate performance data Obtaining third party certification of overall product performance for code compliance

  7. Component Modeling Approach Software Tool

    Energy Science and Technology Software Center (OSTI)

    2010-08-23

    The Component Modeling Approach Software Tool (CMAST) establishes a set of performance libraries of approved components (frames, glass, and spacer) which can be accessed for configuring fenestration products for a project, and btaining a U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) rating for those products, which can then be reflected in a CMA Label Certificate for code compliance. CMAST is web-based as well as client-based. The completed CMA program and software toolmoreĀ Ā» will be useful in several ways for a vast array of stakeholders in the industry: Generating performance ratings for bidding projects Ascertaining credible and accurate performance data Obtaining third party certification of overall product performance for code complianceĀ«Ā less

  8. Remotely Monitored Sealing Array Software

    Energy Science and Technology Software Center (OSTI)

    2012-09-12

    The Remotely Monitored Sealing Array (RMSA) utilizes the Secure Sensor Platform (SSP) framework to establish the fundamental operating capabilities for communication, security, power management, and cryptography. In addition to the SSP framework the RMSA software has unique capabilities to support monitoring a fiber optic seal. Fiber monitoring includes open and closed as well as parametric monitoring to detect tampering attacks. The fiber monitoring techniques, using the SSP power management processes, allow the seals to lastmoreĀ Ā» for years while maintaining the security requirements of the monitoring application. The seal is enclosed in a tamper resistant housing with software to support active tamper monitoring. New features include LED notification of fiber closure, the ability to retrieve the entire fiber optic history via translator command, separate memory storage for fiber optic events, and a more robust method for tracking and resending failed messages.Ā«Ā less

  9. Secure Video Surveillance System Acquisition Software

    Energy Science and Technology Software Center (OSTI)

    2009-12-04

    The SVSS Acquisition Software collects and displays video images from two cameras through a VPN, and store the images onto a collection controller. The software is configured to allow a user to enter a time window to display up to 2 1/2, hours of video review. The software collects images from the cameras at a rate of 1 image per second and automatically deletes images older than 3 hours. The software code operates in amoreĀ Ā» linux environment and can be run in a virtual machine on Windows XP. The Sandia software integrates the different COTS software together to build the video review system.Ā«Ā less

  10. SWiFT Software Quality Assurance Plan.

    SciTech Connect (OSTI)

    Berg, Jonathan Charles

    2016-01-01

    This document describes the software development practice areas and processes which contribute to the ability of SWiFT software developers to provide quality software. These processes are designed to satisfy the requirements set forth by the Sandia Software Quality Assurance Program (SSQAP). APPROVALS SWiFT Software Quality Assurance Plan (SAND2016-0765) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Controls Engineer Jonathan Berg (6121) Date CHANGE HISTORY Issue Date Originator(s) Description A 2016/01/27 Jon Berg (06121) Initial release of the SWiFT Software Quality Assurance Plan

  11. CITSS Configurable Item List: COTS Software | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Configurable Item List: COTS Software CITSS Configurable Item List: COTS Software CITSS Configurable Item List: COTS Software PDF icon CITSS Configurable Item List: COTS Software More Documents & Publications CITSS Project Plan CITSS Project Plan Software Configuration Management Plan

  12. Software Defined Networking (SDN) Project

    Energy Savers [EERE]

    Software Defined Networking (SDN) Project Energy sector-focused SDN flow controller to manage control system networks centrally and securely Background Traditional information technology (IT) approaches to network administration and packet delivery are not always appropriate for electric industry applications. The nondeterministic latency and configuration complexity make network design difficult for the deterministic, static control systems of the energy sector. In the electric industry, it is

  13. MemAxes Visualization Software

    Energy Science and Technology Software Center (OSTI)

    2014-08-28

    Hardware advancements such as Intel's PEBS and AMD's IBS, as well as software developments such as the perf_event API in Linux have made available the acquisition of memory access samples with performance information. MemAxes is a visualization and analysis tool for memory access sample data. By mapping the samples to their associated code, variables, node topology, and application dataset, MemAxes provides intuitive views of the data.

  14. Software archeology: a case study in software quality assurance and design

    SciTech Connect (OSTI)

    Macdonald, John M; Lloyd, Jane A; Turner, Cameron J

    2009-01-01

    Ideally, quality is designed into software, just as quality is designed into hardware. However, when dealing with legacy systems, demonstrating that the software meets required quality standards may be difficult to achieve. As the need to demonstrate the quality of existing software was recognized at Los Alamos National Laboratory (LANL), an effort was initiated to uncover and demonstrate that legacy software met the required quality standards. This effort led to the development of a reverse engineering approach referred to as software archaeology. This paper documents the software archaeology approaches used at LANL to document legacy software systems. A case study for the Robotic Integrated Packaging System (RIPS) software is included.

  15. TWRS systems engineering software configuration management plan

    SciTech Connect (OSTI)

    Porter, P.E.

    1996-10-09

    This plan delineates the requirements for control of software developed and supported by the Tank Waste Remediation System (TWRS) Technical Integration organization. The information contained in this plan shall assist employees involved with software modification and configuration control.

  16. STATUS OF THE NRC'S DECOMMISSIONING PROGRAM

    SciTech Connect (OSTI)

    Orlando, D. A.; Camper, L. W.; Buckley, J.

    2002-02-25

    On July 21, 1997, the U.S. Nuclear Regulatory Commission published the final rule on Radiological Criteria for License Termination (the License Termination Rule) as Subpart E to 10 CFR Part 20. NRC regulations require that materials licensees submit Decommissioning Plans to support the decommissioning of its facility if it is required by license condition, or if the procedures and activities necessary to carry out the decommissioning have not been approved by NRC and these procedures could increase the potential health and safety impacts to the workers or the public. NRC regulations also require that reactor licensees submit Post-shutdown Decommissioning Activities Reports and License Termination Plans to support the decommissioning of nuclear power facilities. This paper provides an update on the status of the NRC's decommissioning program. It discusses the status of permanently shut-down commercial power reactors, complex decommissioning sites, and sites listed in the Site Decommissioning Management Plan. The paper provides the status of various tools and guidance the NRC is developing to assist licensees during decommissioning, including a Standard Review Plan for evaluating plans and information submitted by licensees to support the decommissioning of nuclear facilities and the D and D Screen software for determining the potential doses from residual radioactivity. Finally, it discusses the status of the staff's current efforts to streamline the decommissioning process.

  17. Cost Model and Cost Estimating Software

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    This chapter discusses a formalized methodology is basically a cost model, which forms the basis for estimating software.

  18. @ work' video segment features Robotic Software Engineer

    ScienceCinema (OSTI)

    Idaho National Laboratory

    2010-01-08

    @ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

  19. Software and Data | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software and Data Software and Data Here you can find software programs that model geothermal systems and economics, as well as data related to geothermal technology and energy to assist with calculation and model construction. Software GeoT: A Computer Program for Multicomponent Geothermometry and Geochemical Speciation, Lawrence Berkeley National Laboratory Geothermal Electricity Technology Evaluation Model (GETEM) Chemical models for optimizing geothermal energy production, Idaho National

  20. IS&T@LANL Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IS&T@LANL Software IS&T@LANL Software The following software packages have been developed with significant LANL involvement or lead. Contact Institute Director Stephan Eidenbenz (505) 667-3742 Email Professional Staff Assistant Nickole Aguilar Garcia (505) 665-3048 Email The following software packages have been developed with significant LANL involvement or lead. The links take you either to the project web page or to the open-source repository for download. LANL publishes many of its

  1. @ work' video segment features Robotic Software Engineer

    SciTech Connect (OSTI)

    Idaho National Laboratory

    2008-03-27

    @ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

  2. VMS software for the Jorway-411 interface

    SciTech Connect (OSTI)

    Dorries, T.; Moore, C.; Pordes, R.; White, V.

    1987-05-01

    This report describes a Software Package used to access CAMAC through the Jorway-411 Interface, for use on VAX/VMS systems. The software can be used to access parallel and/or serial CAMAC branch highways, and multiple Jorways may be connected to the VAX UNIBUS or MicroVax QBUS. The software available includes a VAX/VMS device driver for the JORWAY-411 and support routines and programs that access the driver. The software is accompanied by extensive documentation.

  3. Software: our quest for excellence. Honoring 50 years of software history, progress, and process

    SciTech Connect (OSTI)

    1997-06-01

    The Software Quality Forum was established by the Software Quality Assurance (SQA) Subcommittee, which serves as a technical advisory group on software engineering and quality initiatives and issues for DOE`s quality managers. The forum serves as an opportunity for all those involved in implementing SQA programs to meet and share ideas and concerns. Participation from managers, quality engineers, and software professionals provides an ideal environment for identifying and discussing issues and concerns. The interaction provided by the forum contributes to the realization of a shared goal--high quality software product. Topics include: testing, software measurement, software surety, software reliability, SQA practices, assessments, software process improvement, certification and licensing of software professionals, CASE tools, software project management, inspections, and management`s role in ensuring SQA. The bulk of this document consists of vugraphs. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  4. Acquisition & Financial Assistance Rules Status | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisition & Financial Assistance Rules Status Acquisition & Financial Assistance Rules Status Subscribe to Acquisition & Financial Assistance Rules Status Updates PDF icon ...

  5. TacNet Tracker Software

    Energy Science and Technology Software Center (OSTI)

    2008-08-04

    The TacNet Tracker will be used for the monitoring and real-time tracking of personnel and assets in an unlimited number of specific applications. The TacNet Tracker software is a VxWorks Operating System based programming package that controls the functionality for the wearable Tracker. One main use of the TacNet Tracker is in Blue Force Tracking, the ability to track the good guys in an adversarial situation or in a force-on-force or real battle conditions. ThemoreĀ Ā» purpose of blue force tracking is to provide situational awareness to the battlefield commanders and personnel. There are practical military applications with the TacNet Tracker.The mesh network is a wireless IP communications network that moves data packets from source IP addresses to specific destination IP addresses. Addresses on the TacNet infrastructure utilize an 8-bit network mask (255.0.0.0). In other words, valid TacNet addresses range from 10.0.0.1 to 10.254.254.254. The TacNet software design uses uni-cast transmission techniques because earlier mesh network software releases did not provide for the ability to utilize multi-cast data movement. The TacNet design employs a list of addresses to move information within the TacNet infrastructure. For example, a convoy text file containing the IP addresses of all valid receivers of TacNet information could be used for transmitting the information and for limiting transmission to addresses on the list.Ā«Ā less

  6. Software | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software ALCF MPI Benchmark Suite: ALCF MPI Benchmark Suite, which is designed to benchmark and measure several basic routines, such as messaging rate, ping-pong, aggregate off-node bandwidth, bi-section bandwidth, and collective operations. Contact: Vitali Morozov Download: ALCF_MPI_Benchmark_v1.01.BGQ.tar.bz2 BigSort Benchmark: The BigSort benchmark sorts a large number of 64-bit integers (from 0 to T) in parallel. In particular, the total size of the data set can exceed the aggregated memory

  7. CHP Installed Capacity Optimizer Software

    Energy Science and Technology Software Center (OSTI)

    2004-11-30

    The CHP Installed Capacity Optimizer is a Microsoft Excel spreadsheet application that determines the most economic amount of capacity of distributed generation and thermal utilization equipment (e.g., absorption chillers) to install for any user-defined set of load and cost data. Installing the optimum amount of capacity is critical to the life-cycle economic viability of a distributed generation/cooling heat and power (CHP) application. Using advanced optimization algorithms, the software accesses the loads, utility tariffs, equipment costs,moreĀ Ā» etc., and provides to the user the most economic amount of system capacity to install.Ā«Ā less

  8. GENI: Grid Hardware and Software

    SciTech Connect (OSTI)

    2012-01-09

    GENI Project: The 15 projects in ARPA-Eā€™s GENI program, short for ā€œGreen Electricity Network Integration,ā€ aim to modernize the way electricity is transmitted in the U.S. through advances in hardware and software for the electric grid. These advances will improve the efficiency and reliability of electricity transmission, increase the amount of renewable energy the grid can utilize, and provide energy suppliers and consumers with greater control over their power flows in order to better manage peak power demand and cost.

  9. NWP Small Business Status through June 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Small Business Status through June 2014

  10. ARM - Status and Actions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status and Actions Campaign Details News Field Participants Resources Status and Actions ARM Data Discovery Browse Data Status and Actions For up-to-date campaign action, please see News 28.JUN.07 Requests for all field participants: Please place your preliminary data on the CHAPS ftp site no later than December. Connor Flynn has worked with ARM colleagues to give us a password protected FTP site. If you haven't received the instructions already from Connor regarding how to access the site,

  11. NMMSS Software Quality Assurance Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NMMSS Software Quality Assurance Plan NMMSS Software Quality Assurance Plan The Software Quality Assurance Plan (SQAP) for the Nuclear Materials Management and Safeguard System ...

  12. Turbine Aeration Physical Modeling and Software Design | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Turbine Aeration Physical Modeling and Software Design Turbine Aeration Physical Modeling and Software Design Turbine Aeration Physical Modeling and Software Design Office ...

  13. Software Quality: A Guide to Responsibilities and Resources,...

    Energy Savers [EERE]

    Software Quality: A Guide to Responsibilities and Resources, SQAS Software Quality: A Guide to Responsibilities and Resources, SQAS This Guide provides guidance to the software...

  14. o CNMS Status Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Town Hall User Meeting (see attached slides) * Agenda: o Intro of UEC o CNMS Status Update o UEC activities o Nominations for open seat on the UEC * Activities o Monthly Telecon o...

  15. Small Business Status

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Teaming Arrangements on Small Business Status The Department of Energy is planning to set aside for small businesses a number of acquisitions of a very complex nature, requiring a ...

  16. NIF Status Update - 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    news NIF Status Update - 2014 May Gigabar Equation-of-State Experiment Reaches Record Pressures On May 29, the NIF Team fired two gigabar (Gbar)-class equation-of-state experiments...

  17. Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Updates and Status Current Status: Up Open Issues List of known problems, submitted bug reports and issues we are actively working on Read More Ā» Timeline and Updates A list of major system changes and updates Read More Ā» Email Announcements Archive An archive of email announcements sent to NERSC users regarding Edison Read More Ā» Last edited: 2016-04-29 11:34:32

  18. Status of Corrective Actions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WIPP AIB Report Ā» Status of Corrective Actions Status of Corrective Actions at LANL Department of Energy Issues Accident Investigation Board (AIB) Report on February 14 Incident at the Waste Isolation Pilot Project in Carlsbad, New Mexico April 12, 2012 x x Contact Communication Office (505) 667-7000 Corrective Actions Undertaken by Los Alamos National Laboratory though a collaborative effort led by the Associate Director for Environmental Safety and Health (ADESH), the Associate Director for

  19. Safety system status monitoring

    SciTech Connect (OSTI)

    Lewis, J.R.; Morgenstern, M.H.; Rideout, T.H.; Cowley, P.J.

    1984-03-01

    The Pacific Northwest Laboratory has studied the safety aspects of monitoring the preoperational status of safety systems in nuclear power plants. The goals of the study were to assess for the NRC the effectiveness of current monitoring systems and procedures, to develop near-term guidelines for reducing human errors associated with monitoring safety system status, and to recommend a regulatory position on this issue. A review of safety system status monitoring practices indicated that current systems and procedures do not adequately aid control room operators in monitoring safety system status. This is true even of some systems and procedures installed to meet existing regulatory guidelines (Regulatory Guide 1.47). In consequence, this report suggests acceptance criteria for meeting the functional requirements of an adequate system for monitoring safety system status. Also suggested are near-term guidelines that could reduce the likelihood of human errors in specific, high-priority status monitoring tasks. It is recommended that (1) Regulatory Guide 1.47 be revised to address these acceptance criteria, and (2) the revised Regulatory Guide 1.47 be applied to all plants, including those built since the issuance of the original Regulatory Guide.

  20. Corrective Action Unit Deliverable/Task Status Tracking Tool

    Energy Science and Technology Software Center (OSTI)

    2009-08-13

    The CDSTool is a project management tool designed specifically to manage environmental restoration projects. The tool allows users to capture all projects in their baseline, develop and assign approaches, assign documents and reviews to particular projects and approaches, track and measure progress and status of each document/phase/activity in the project, based on the approach. The CDSTtool provides the ability to assign responsible personnel to each activity, provide status to scheduling software, track WBS, capture issues,moreĀ Ā» comments, and history of development or performance related to the activity, document or phase.Ā«Ā less

  1. Graph Partitioning and Sequencing Software

    Energy Science and Technology Software Center (OSTI)

    1995-09-19

    Graph partitioning is a fundemental problem in many scientific contexts. CHACO2.0 is a software package designed to partition and sequence graphs. CHACO2.0 allows for recursive application of several methods for finding small edge separators in weighted graphs. These methods include inertial, spectral, Kernighan Lin and multilevel methods in addition to several simpler strategies. Each of these approaches can be used to partition the graph into two, four, or eight pieces at each level of recursion.moreĀ Ā» In addition, the Kernighan Lin method can be used to improve partitions generated by any of the other algorithms. CHACO2.0 can also be used to address various graph sequencing problems, with applications to scientific computing, database design, gene sequencing and other problems.Ā«Ā less

  2. Web Operational Status Boards

    SciTech Connect (OSTI)

    2004-04-16

    Web Operational Status Boards (WebOSB)is a web-based application designed to acquire, display, and update highly dynamic status information between multiple users and jurisdictions. WebOSB is able to disseminate real-time status information?support the timely sharing of information?with constant, dynamic updates via personal computers and the Internet between emergency operations centers (EOCs), incident command centers, and to users outside the EOC who need to know the information (hospitals, shelters, schools). The WebOSB application far exceeds outdated information-sharing methods used by emergency workers: whiteboards, Word and Excel documents, or even locality-specific Web sites. WebOSB?s capabilities include the following elements: - Secure access. Multiple users can access information on WebOSB from any personal computer with Internet access and a secure ID. Privileges are use to control access and distribution of status information and to identify users who are authorized to add or edit information. - Simultaneous update. WebOSB provides options for users to add, display, and update dynamic information simultaneously at all locations involved in the emergency management effort, A single status board can be updated from multiple locations enabling shelters and hospitals to post bed availability or list decontamination capability. - On-the-fly modification. Allowing the definition of an existing status board to be modified on-the-fly can be an asset during an emergency, where information requirements can change quickly. The status board designer feature allows an administrator to quickly define, modi,, add to, and implement new status boards in minutes without needing the help of Web designers and computer programmers. - Publisher/subscriber notification. As a subscriber, each user automatically receives notification of any new information relating to specific status boards. The publisher/subscriber feature automatically notified each user of any new information relating to specific status boards. WebOSB can be installed to fit the specific needs of an emergency management community. Because it was originally developed to concurrently support multiple EOCs at the local, county, and state level, it can also support multi-user environments for other types of projects.

  3. Web Operational Status Boards

    Energy Science and Technology Software Center (OSTI)

    2004-04-16

    Web Operational Status Boards (WebOSB)is a web-based application designed to acquire, display, and update highly dynamic status information between multiple users and jurisdictions. WebOSB is able to disseminate real-time status informationĀ—support the timely sharing of informationĀ—with constant, dynamic updates via personal computers and the Internet between emergency operations centers (EOCs), incident command centers, and to users outside the EOC who need to know the information (hospitals, shelters, schools). The WebOSB application far exceeds outdated information-sharingmoreĀ Ā» methods used by emergency workers: whiteboards, Word and Excel documents, or even locality-specific Web sites. WebOSBĀ’s capabilities include the following elements: - Secure access. Multiple users can access information on WebOSB from any personal computer with Internet access and a secure ID. Privileges are use to control access and distribution of status information and to identify users who are authorized to add or edit information. - Simultaneous update. WebOSB provides options for users to add, display, and update dynamic information simultaneously at all locations involved in the emergency management effort, A single status board can be updated from multiple locations enabling shelters and hospitals to post bed availability or list decontamination capability. - On-the-fly modification. Allowing the definition of an existing status board to be modified on-the-fly can be an asset during an emergency, where information requirements can change quickly. The status board designer feature allows an administrator to quickly define, modi,, add to, and implement new status boards in minutes without needing the help of Web designers and computer programmers. - Publisher/subscriber notification. As a subscriber, each user automatically receives notification of any new information relating to specific status boards. The publisher/subscriber feature automatically notified each user of any new information relating to specific status boards. WebOSB can be installed to fit the specific needs of an emergency management community. Because it was originally developed to concurrently support multiple EOCs at the local, county, and state level, it can also support multi-user environments for other types of projects.Ā«Ā less

  4. A new development on measurement and control software of SANS BATAN spectrometer (SMARTer) in Serpong, Indonesia

    SciTech Connect (OSTI)

    Bharoto,; Suparno, Nadi; Putra, Edy Giri Rachman

    2015-04-16

    In 2005, the main computer for data acquisition and control system of Small-angle Neutron Scattering (SANS) BATAN Spectrometer (SMARTer) was replaced since it halted to operate the spectrometer. According to this replacement, the new software for data acquisition and control system has been developed in-house. Visual Basic programming language is used in developing the software. In the last two years, many developments have been made both in the hardware and also the software to conduct the experiment is more effective and efficient. Lately, the previous motor controller card (ISA Card) was replaced with the programmable motor controller card (PCI Card) for driving one motor of position sensitive detector (PSD), eight motors of four collimators, and six motors of six pinhole discs. This new control system software makes all motors can be moved simultaneously, then it reduces significantly the consuming time of setting up the instrument before running the experiment. Along with that development, the new data acquisition software under MS Windows operating system is also developed to drive a beam stopper in X-Y directions as well as to read the equipment status such as position of the collimators and PSD, to acquire neutron counts on monitor and PSD detectors, and also to manage 12 samples position automatically. A timer object which is set in one second to read the equipment status via serial port of the computer (RS232C), and general purpose interface board (GPIB) for reading the total counts of each pixel of the PSD from histogram memory was used in this new software. The experiment result displayed in real time on the main window, and the data is saved in the special format for further data reduction and analysis. The new software has been implemented and performed for experiment using a preset count or preset time mode for absolute scattering intensity method.

  5. Automation Status | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Automation Status Automation Status Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011. PDF icon Automation Status More Documents & Publications PEM Stack Manufacturing: Industry Status 2011 NREL/DOE Hydrogen and Fuel Cell Manufacturing R&D Workshop Report Manufacturing Barriers to High Temperature PEM Commercialization

  6. Improving CSE Software through Reproducibility Requirements. (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Improving CSE Software through Reproducibility Requirements. Citation Details In-Document Search Title: Improving CSE Software through Reproducibility Requirements. Abstract not provided. Authors: Heroux, Michael Allen Publication Date: 2011-02-01 OSTI Identifier: 1109282 Report Number(s): SAND2011-1158C 471476 DOE Contract Number: AC04-94AL85000 Resource Type: Conference Resource Relation: Conference: 4th International Workshop on Software Engineering for Computational

  7. Thermal Scout Software - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Analysis Energy Analysis Find More Like This Return to Search Thermal Scout Software National Renewable Energy Laboratory Contact NREL About This Technology Publications: PDF Document Publication "Field Survey of Parabolic Trough Receiver Thermal Performance" H. Price, R. Forristall, T. Wendelin, and A. Lewandowski, NREL/CP-550-39459, April 2006 (914 KB) Heat Collection Element Survey System software<br /> Heat Collection Element Survey System software Parabolic troughs

  8. Fenestration Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fenestration Software Tools Fenestration Software Tools Addthis 1 of 6 Fenestration Software Tools Overview -- Portfolio and Use Cases Image: Lawrence Berkeley National Laboratory 2 of 6 Facade Heat Gain for four different office scenarios displayed in COMFEN for a full year. Image: Lawrence Berkeley National Laboratory 3 of 6 False color results indicating glare and light levels for 9 a.m., noon and 3 p.m. on June 21st for four different scenarios in COMFEN. Image: Lawrence Berkeley National

  9. ASCEM Software Capabilities and Performance Assessment Deployments |

    Energy Savers [EERE]

    Department of Energy ASCEM Software Capabilities and Performance Assessment Deployments ASCEM Software Capabilities and Performance Assessment Deployments Greg Flach ASCEM Site Applications Team Performance & Risk Assessment Community of Practice Technical Exchange Meeting December 11-12, 2014 Las Vegas NM To view all the P&RA CoP 2014 Technical Exchange Meeting videos click here. Video Presentation PDF icon ASCEM Software Capabilities and Performance Assessment Deployments More

  10. Fenestration Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fenestration Software Tools Fenestration Software Tools 1 of 6 Fenestration Software Tools Overview -- Portfolio and Use Cases Image: Lawrence Berkeley National Laboratory 2 of 6 Facade Heat Gain for four different office scenarios displayed in COMFEN for a full year. Image: Lawrence Berkeley National Laboratory 3 of 6 False color results indicating glare and light levels for 9 a.m., noon and 3 p.m. on June 21st for four different scenarios in COMFEN. Image: Lawrence Berkeley National Laboratory

  11. Software Policy | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cooley Policies Accounts Policy Account Sponsorship & Retention Policy ALCC Quarterly Report Policy ALCF Acknowledgment Policy Data Policy INCITE Quarterly Report Policy Job Scheduling Policy on BG/Q Job Scheduling Policies on Cooley Pullback Policy Refund Policy Software Policy User Authentication Policy Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Software Policy ALCF Resource Software

  12. Lead Software Engineer | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    an individual to join its Information Technology Department in the High Performance Computing (HPC) and Network Division. Responsibilities for the Software Engineer will...

  13. SERI QC Solar Data Quality Assessment Software

    Energy Science and Technology Software Center (OSTI)

    1994-12-31

    SERI QC is a mathematical software package that assesses the quality of solar radiation data. The SERI QC software is a function written in the C programming language. IT IS NOT A STANDALONE SOFTWARE APPLICATION. The user must write the calling application that requires quality assessment of solar data. The C function returns data quality flags to the calling program. A companion program, QCFIT, is a standalone Windows application that provides support files for themoreĀ Ā» SERI QC function (data quality boundaries). The QCFIT software can also be used as an analytical tool for visualizing solar data quality independent of the SERI QC function.Ā«Ā less

  14. Safety Software Quality Assurance Functional Area Qualification...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    72-2011, Safety Software Quality Assurance Functional Area Qualification Standard by Diane Johnson This SSQA FAQS identifies the minimum technical competency requirements for DOE...

  15. Understanding and managing risk in software systems

    SciTech Connect (OSTI)

    Fletcher, S.K.; Jansma, R.; Lim, J.; Murphy, M.; Wyss, G.

    1995-07-01

    When software is used in safety-critical, security-critical, or mission-critical situations, it is imperative to understand and manage the risks involved. A risk assessment methodology and toolset have been developed which are specific to software systems. This paper describes the concepts of the methodology, with emphasis on the experience of designing a toolset to support the methodology. Also presented are results of applying the methodology to two real software-based products: the software toolset itself, and a network firewall.

  16. Improving CSE Software through Reproducibility Requirements....

    Office of Scientific and Technical Information (OSTI)

    Resource Type: Conference Resource Relation: Conference: 4th International Workshop on ... Proposed for presentation at the 4th International Workshop on Software Engineering for ...

  17. Combustion Analysis Software Package for Internal Combustion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Return to Search Combustion Analysis Software Package for Internal Combustion Engines Colorado State University Contact CSU About This Technology Technology Marketing Summary ...

  18. Duty Cycle Software - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search Duty Cycle Software National Renewable Energy Laboratory Contact NREL About This Technology Technology Marketing Summary Duty cycles capture the ...

  19. EXACT Software Repository v 1.1

    Energy Science and Technology Software Center (OSTI)

    2007-01-07

    The EXACT Software Repository contains a variety of software packages for describing, controlling, and analyzing computer experiments. The EXACT Python framework provides the experimentalist with convenient software tools to ease and organize the entire experimental process, including the description of factors and levels, the design of experiments, the control of experimental runs, the archiving of results, and analysis of results. The FAST package provides a Framework for Agile Software Testing. FAST manage the distributed executionmoreĀ Ā» of EXACT, as well as summaries of test results.Ā«Ā less

  20. Crowdsourcing Software Award | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (MIT) and the Defense Advanced Research Projects Agency (DARPA). The software is designed to allow DARPA to solicit and attract new ideas and concepts that could shape the ...

  1. AMO Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tools AMO Software Tools PDF icon webcast_20111115_better_tools_better_plants.pdf PDF icon webcast_20110712_itp_tools.pdf PDF icon webcast_2009-0611_ind_buildings.pdf PDF icon MotorMaster+ Tool Presentation (March 19, 2009) PDF icon webcast_2009-0312_steam_systems_tool.pdf PDF icon webcast_2009-0305_software_tools.pdf PDF icon QuickPEP Tool Demonstration (February 26, 2009) PDF icon quickpep_webcast_10-30-08.pdf PDF icon software_tools_webcast_10-23-08.pdf More Documents &

  2. SAPHIRE 8 Software Project Plan

    SciTech Connect (OSTI)

    Curtis L.Smith; Ted S. Wood

    2010-03-01

    This project is being conducted at the request of the DOE and the NRC. The INL has been requested by the NRC to improve and maintain the Systems Analysis Programs for Hands-on Integrated Reliability Evaluation (SAPHIRE) tool set concurrent with the changing needs of the user community as well as staying current with new technologies. Successful completion will be upon NRC approved release of all software and accompanying documentation in a timely fashion. This project will enhance the SAPHIRE tool set for the user community (NRC, Nuclear Power Plant operations, Probabilistic Risk Analysis (PRA) model developers) by providing improved Common Cause Failure (CCF), External Events, Level 2, and Significance Determination Process (SDP) analysis capabilities. The SAPHIRE development team at the Idaho National Laboratory is responsible for successful completion of this project. The project is under the supervision of Curtis L. Smith, PhD, Technical Lead for the SAPHIRE application. All current capabilities from SAPHIRE version 7 will be maintained in SAPHIRE 8. The following additional capabilities will be incorporated: • Incorporation of SPAR models for the SDP interface. • Improved quality assurance activities for PRA calculations of SAPHIRE Version 8. • Continue the current activities for code maintenance, documentation, and user support for the code.

  3. GENII Version 2 Software Design Document

    SciTech Connect (OSTI)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying appropriate risk factors to the effective dose equivalent or organ dose. In addition, Version 2 uses cancer risk factors from Federal Guidance Report 13 to estimate risk to specific organs or tissues.

  4. Ingestion of phosphorus-32 at Massachusetts Institute of Technology, Cambridge, Massachusetts, identified on August 19, 1995

    SciTech Connect (OSTI)

    1995-12-01

    On Monday, October 16, 1995, the Massachussetts Institue of Technology (MIT, the licensee) notified the US Nuclear Regulatory Commission (NRC) of an incident involving ingestion of phosphorus-32 by a researcher at the MIT Center for Cancer Research. The licensee informed the NRC that a researcher had reported the incident on August 19. The licensee initially estimated the intake as 500 microcuries (19 MBq) and the dose as 4000 millirem (40 mSv) to the individual. On October 12, the licensee informed the researcher that its final intake estimate was 579 microcuries (21 MBq), just under the 600 microcuries (22 MBq) which would represent an overexposure. On October 17, the NRC established an Incident Investigation Team to investigate the case. NRC also contracted with Lawrence Livermore National Laboratory and Oak Ridge Institute for Science and Education to do independent dose assessments of the urine sample data and the whole-body data. The Team concluded that the licensee`s final intake and dose estimates were in accordance with accepted scientific references and NRC guidance. However, recognizing the uncertainties involved in the use of models to simulate human characteristics, the Team determined the intake would be better characterized as likely falling within a range of 500 to 750 microcuries (19--28 NMq). An NRC medical consultant concluded that no symptoms or acute effects should be observed from an intake of this level.

  5. The Macolumn: Desperately seeking software. [Geologic software for the Apple Macintosh

    SciTech Connect (OSTI)

    Busbey, A.B.

    1988-08-01

    The Apple Macintosh has been available since 1984, but there has been little development of commercial geological software for it. The author briefly reviews what geological software is available for the Macintosh

  6. Software Evaluation of Hotspot and DOE Safety Software Toolbox Recommendation, 3/07

    Broader source: Energy.gov [DOE]

    The intent of the gap analysis is to evaluate Hotspot specified above and recommend to the DOE Office of Health, Safety and Security (HSS) whether this safety software should be added to the DOE Safety Software Central Registry.

  7. Guide to Preventing Computer Software Piracy

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-07-12

    Guide to Preventing Computer Software Piracy It is the intent of the Department of Energy (DOE) to issue guidance in accordance with Federal CIO Council recommendations and in compliance with Executive Order 13103. The guidance in this document is based on the CIO Council's recommendations in reference to computer software piracy, and applies to all DOE elements. Canceled by DOE N 205.18

  8. HotSpot Software Configuration Management Plan

    SciTech Connect (OSTI)

    Walker, H; Homann, S G

    2009-03-12

    This Software Configuration Management Plan (SCMP) describes the software configuration management procedures used to ensure that the HotSpot dispersion model meets the requirements of its user base, which includes: (1) Users of the PC version of HotSpot for consequence assessment, hazard assessment and safety analysis calculations; and (2) Users of the NARAC Web and iClient software tools, which allow users to run HotSpot for consequence assessment modeling These users and sponsors of the HotSpot software and the organizations they represent constitute the intended audience for this document. This plan is intended to meet Critical Recommendations 1 and 3 from the Software Evaluation of HotSpot and DOE Safety Software Toolbox Recommendation for inclusion of HotSpot in the Department of Energy (DOE) Safety Software Toolbox. HotSpot software is maintained for the Department of Energy Office of Emergency Operations by the National Atmospheric Release Advisory Center (NARAC) at Lawrence Livermore National Laboratory (LLNL). An overview of HotSpot and NARAC are provided.

  9. Padlock and RCA signature predication software

    Energy Science and Technology Software Center (OSTI)

    2005-10-24

    This software predicts DNA signatures compatible with padlock probe and rolling circle amplification (RCA) platforms. Specifically, the software takes a multiple sequence alignment, generates a consensus of conserved bases, and from these conserved regions selects forward and reverse primers that are immediately adjacent to one another, which is the desired orientation for assays such as padlock probes and RCA.

  10. Glueballs: a status report

    SciTech Connect (OSTI)

    Scharre, D.L.

    1982-01-01

    It is expected from quantum chromodynamics (QCD) that glueballs, bound states which contain gluons but no valence quarks, should exist. To date, no conclusive evidence for glueballs has been presented. After a brief review of the expected properties and experimental signatures of glueballs the status of some glueball candidate states are discussed.

  11. Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Burst Buffer Cori Phase II Questions about Cori II Application Porting and Performance NESAP NERSC-8 Procurement Programming models File Storage and I/O Edison PDSF Genepool Testbeds Retired Systems Storage & File Systems Data & Analytics Connecting to NERSC Queues and Scheduling Job Logs & Statistics Application Performance Training & Tutorials Software Policies User Surveys NERSC Users Group User Announcements Help Staff Blogs Request Repository Mailing List Operations for:

  12. Visualizing Energy Resources Dynamically on Earth (VERDE)

    Energy Science and Technology Software Center (OSTI)

    2009-06-01

    VERDE is a software service that ingests data on real-time eneryg grid status and analyzes the data with models and algorithms presenting the output in a form that can be visualized by client spatio-temporal browsers

  13. ARM - Historical Archive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ocean Measurements: An ARM Notebook of Buoys, Vessels, and Rigs - Draft (PDF, 5,186) ARM Climate Research Facility Sites (PDF, 1.7MB) ACRF Ingest Software Status: New, Current, ...

  14. LAMPF: proposal status and summaries

    SciTech Connect (OSTI)

    Rayburn, L.; Talley, B.

    1982-03-01

    Revisions and additions are given for LAMPF proposal summaries and status reports. These apply to LA-7444-MS. (GHT)

  15. National Hydrogen Learning Demonstration Status

    Broader source: Energy.gov [DOE]

    Presentation slides from the Fuel Cell Technologies Program webinar "National Hydrogen Learning Demonstration Status" held February 6, 2012.

  16. SuperNEMO status

    SciTech Connect (OSTI)

    Chapon, A. [Universite de Caen Basse-Normandie, ENSICAEN, LPC Caen, UMR 6534, 6 boulevard du Marechal Juin, 14050 CAEN Cedex (France); Collaboration: SUPERNEMO Collaboration

    2011-12-16

    The SuperNEMO experiment aims to reach a sensitivity up to 10{sup 26} years on the half-life of neutrinoless double beta decay. The SuperNEMO project strongly inherits from the previous Nemo3 experiment. It will consist of a ''tracko-calo'' modular detector with at least 100 kg of betabeta isotope. The current status of the main R and D tasks will be presented: enrichment and production of source foils, radiopurity control, tracker and calorimeter.

  17. ESnet Planning, Status,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ESnet Planning, Status, and Future Issues William E. Johnston, ESnet Department Head and Senior Scientist Joe Burrescia, General Manager Mike Collins, Chin Guok, and Eli Dart, Engineering Brian Tierney, Advanced Development Jim Gagliardi, Operations and Deployment Stan Kluz, Infrastructure and ECS Mike Helm, Federated Trust Dan Peterson, Security Officer Gizella Kapus, Business Manager and the rest of the ESnet Team wej@es.net, this talk is available at www.es.net Energy Sciences Network

  18. Small Business Status

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Teaming Arrangements on Small Business Status The Department of Energy is planning to set aside for small businesses a number of acquisitions of a very complex nature, requiring a myriad of capabilities on the part of offerors, which might result in teaming arrangements or joint ventures being formed. Given this, the Department believes that potential offerors should be aware of the Small Business Administration's regulations regarding affiliation. As such, DOE will include the following

  19. MARS Flight Engineering Status

    SciTech Connect (OSTI)

    Fast, James E.; Dorow, Kevin E.; Morris, Scott J.; Thompson, Robert C.; Willett, Jesse A.

    2010-04-06

    The Multi-sensor Airborne Radiation Survey Flight Engineering project (MARS FE) has designed a high purity germanium (HPGe) crystal array for conducting a wide range of field measurements. In addition to the HPGe detector system, a platform-specific shock and vibration isolation system and environmental housing have been designed to support demonstration activities in a maritime environment on an Unmanned Surface Vehicle (USV). This report describes the status of the equipment as of the end of FY09.

  20. Requirements and Submission Process for Qualified Software

    Broader source: Energy.gov [DOE]

    This document provides a complete list of requirements and submission details to have software qualified for calculating energy and power cost savings for commercial building tax deductions under tax code Section 179D.

  1. DEVELOPMENT OF A SOFTWARE DESIGN TOOL FOR

    Broader source: Energy.gov [DOE]

    This project focuses on the development of a stand-alone software tool for the design and economic analysis of hybrid geothermal heat pump systems for heating-and cooling dominated buildings using solar collectors in both operating modes.

  2. Gas characterization system software acceptance test report

    SciTech Connect (OSTI)

    Vo, C.V.

    1996-03-28

    This document details the results of software acceptance testing of gas characterization systems. The gas characterization systems will be used to monitor the vapor spaces of waste tanks known to contain measurable concentrations of flammable gases.

  3. JaWE to Openflow translation software

    Energy Science and Technology Software Center (OSTI)

    2004-09-07

    Jawt2Openfiow isa software product for the Zope content management system that converts a workflow defined by JaWE to a workflow implemented with Openflow in Zope.

  4. Sodium storage facility software configuration control plan

    SciTech Connect (OSTI)

    Jones, D.D.

    1997-06-18

    This document describes the plan for ensuring that the SSF Trace Heat Software will be available for use whenever that facility is opened for the use of draining sodium from FFTF.

  5. University of Portland Google Vernier Software + Technology...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sponsors for their support of the bpa science bowl University of Portland Google Vernier Software + Technology Schweitzer Engineering Laboratories B O N N E V I L L E P O W E...

  6. Property:SoftwarePage | Open Energy Information

    Open Energy Info (EERE)

    scs900-site-controller-software + MHK ISDBSensors0.01" Rain Gauge (2m cable) Smart Sensor + http:www.onsetcomp.comproductssoftwarehoboware + MHK ISDBSensors0.2 mm...

  7. CB-EMIS WEB SERVICE SOFTWARE

    Energy Science and Technology Software Center (OSTI)

    2007-01-01

    This software provides CB-EMIS data to remote devices using a secure internet connection. The CB-EMIS Web Service filters and repackages data in a form suitable for resource limited devices such as a cell phone. Data transmission is filtered based on a user's authentical level. The web services acts as intermediary so that no direct connection is possible between the internet and the CB-EMIS server software.

  8. Collaboration Topics - System Software | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration System Software This collaboration focuses on research and development of parallel file system interfaces and tools, system resource management capabilities, operating system evaluation, and software for high-performance interconnects. Current activities include the test and evaluation of technologies and tools associated with the Lustre parallel file system, the development and analysis of middleware to encapsulate application I/O requirements and abstract the capabilities of

  9. Open Source Software | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Source Software The Ames Laboratory has a number of open source software packages available which are listed below: CyDime: As the rate, sophistication, and potential damage of cyber attacks continue to grow, the latency of human-speed analysis and response is becoming increasingly costly. Intelligent response to detected attacks and other malicious activity requires both knowledge of the characteristics of the attack as well as how resources involved in the attack related to the mission of

  10. Electronic Records Management Software Applications Design Criteria

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standard | Department of Energy Electronic Records Management Software Applications Design Criteria Standard Electronic Records Management Software Applications Design Criteria Standard This Standard is reissued under the authority of DoD Directive 5015.2, "Department of DefenseRecords Management Program," March 6, 2000, (Reference (a)) which provides implementing and procedural guidance on the management of records in the Department of Defense. PDF icon Electronic Records

  11. Software Based DIAS and FACET Training Guide

    Energy Science and Technology Software Center (OSTI)

    2005-03-01

    The Dynamic Information Architecture System (DIAS) is an ANL- developed framework fo developing multidisciplinary simulation systems. It is copyrighted (ANL-SF-96-130 and ANL-SF-98-127) and licensed software and the invention is patented (ANL-IN-95-146). This Developer's Guide and accompanying Farm Tax tutorial provides software based system and documentation tha supports the DIAS licenses.

  12. Software and Libraries | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System Overview Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries Boost CPMD Code_Saturne GAMESS GPAW GROMACS LAMMPS MADNESS QBox IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Software and Libraries Expand All Close All Mira/Cetus Vesta

  13. MotorMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tool Brochure MotorMaster+ Software Tool Brochure This brochure provides information on AMO's MotorMaster+ software tool, including how it works, next steps, and how to ...

  14. Arigo Software GmbH | Open Energy Information

    Open Energy Info (EERE)

    Arigo Software GmbH Jump to: navigation, search Name: Arigo Software GmbH Place: Germany Product: Developer of LonWorks hardware and software products References: Arigo...

  15. Software speeds detection of diseases and cancer-treatment targets

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software speeds detection of diseases Software speeds detection of diseases and cancer-treatment targets The Lab has released an updated version of software that is now capable of...

  16. Status of the phenomena representation, 3D modeling, and cloud-based software architecture development

    SciTech Connect (OSTI)

    Smith, Curtis L.; Prescott, Steven; Kvarfordt, Kellie; Sampath, Ram; Larson, Katie

    2015-09-01

    Early in 2013, researchers at the Idaho National Laboratory outlined a technical framework to support the implementation of state-of-the-art probabilistic risk assessment to predict the safety performance of advanced small modular reactors. From that vision of the advanced framework for risk analysis, specific tasks have been underway in order to implement the framework. This report discusses the current development of a several tasks related to the framework implementation, including a discussion of a 3D physics engine that represents the motion of objects (including collision and debris modeling), cloud-based analysis tools such as a Bayesian-inference engine, and scenario simulations. These tasks were performed during 2015 as part of the technical work associated with the Advanced Reactor Technologies Program.

  17. Digital X-ray Pipe Inspector Software

    Energy Science and Technology Software Center (OSTI)

    2009-10-29

    The Digital X-ray Pipe Inspector software requires a digital x-ray image of a pipe as input to the program, such as the image in Attachment A Figure 1. The image may be in a variety of software formats such as bitmap, jpeg, tiff, DICOM or DICONDE. The software allows the user to interactively select a region of interest from the image for analysis. This software is used to analyze digital x-ray images of pipes tomoreĀ Ā» evaluate loss of wall thickness. The software specifically provides tools to analyze the image in (a) the pipe walls, (b) between the pipe walls. Traditional software uses only the information at the pipe wall while this new software also evaluates the image between the pipewalls. This makes the inspection process faster, more thorough, more efficient, and reduces expensive reshots. Attachment A Figure 2 shows a region of interest (a green box) drawn by the user around an anomaly in the pipe wall. This area is automatically analyzed by the external pipe wall tool with the result shown in Attachment A Figure 3. The edges of the pipe wall are detected and highlighted in yellow and areas where the wall thickness in less the the minimum wall threshold are shown in red. These measurements are typically made manually in other software programs, which lead to errors and inconsistency because the location of the edges are estimated by the user. Attachment A Figure 4 shows a region of interest (a green box) drawn by the user between the pipe walls. As can be seen there are intensity anomalies that correspond to wall defects. However, this information is not used directly by other software programs. In order to fully investigate these anomalies, the pipe would be reinspected in a different orientation to attempt to obtain a view of the anomaly in the pipe wall rather than the interior of the pipe. The pipe may need to be x-rayed a number of times to obtain the correct orientation. This is very costly and time consuming. The new software can perform the analysis directly on the intensity information in the original image. Figures 5 through 9 in Attachment A show wall defects in red for various percents of wall thickness loss. For example, Figure 5 show defects (in red) where the wall thickness is 95% or less than the nominal wall thickness (or a 5% or greater wall thickness loss). Wall thicknesses can be given in absolute terms as well.Ā«Ā less

  18. Software Configuration Management Plan (SCMP) version 1.1, Phase 1. Federal Emergency Management Information System (FEMIS): System platform

    SciTech Connect (OSTI)

    Strycker, F.E. Jr.

    1993-07-19

    This document is the Software Configuration Management Plan (SCMP) for the Federal Emergency Management Information System (FEMIS) project. FEMIS is an automated decision support system that integrates the planning and analysis, operations and response, and recovery phases of emergency management. It has broad application across the full range of emergency planning and operations. The SCMP will describe the configuration management system to be used for the control and maintenance of the software and associated documentation during development, test, and production of the FEMIS project. This plan provides information on the requirements and procedures necessary for the configuration management activities of FEMIS. It identifies the software configuration management requirements and establishes the methodology for generating configuration identifiers, controlling engineering changes, maintaining status accounting, and performing audits and reviews during the design and development of software configuration items. This plan defines the Software Configuration Management (SCM) activities necessary for maintaining all support software items and associated documentation being developed, procured, tested, sustained and kept in the production environment for FEMIS. It will apply to all phases of the software development life cycle, up to and including the time of delivery to the customer.

  19. Building Energy Management Open-Source Software (BEMOSS)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Management Open-Source Software (BEMOSS) 2014 Building Technologies Office ... Key Milestones 1.First cut of the BEMOSS software - 10312014 2.User interface app - 10...

  20. Unique Hardware and Software Data Acquisition and Processing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hardware and Software Data Acquisition and Processing Solutions in a Small Engine Test Cell for Enhanced Kinetic Engine Modeling Accuracy Unique Hardware and Software Data ...

  1. DOE Commercial Building Energy Asset Score: Software Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Score: Software Development for Phase II Building Types DOE Commercial Building Energy Asset Score: Software Development for Phase II Building Types DOE Commercial Building Energy ...

  2. Nuclear Energy Advanced Modeling and Simulation (NEAMS) Software...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Verification and Validation (V&V) Plan Requirements Nuclear Energy Advanced Modeling and Simulation (NEAMS) Software Verification and Validation (V&V) Plan Requirements ...

  3. Trilinos developers SQE guide : ASC software quality engineering...

    Office of Scientific and Technical Information (OSTI)

    developers SQE guide : ASC software quality engineering practices. Citation Details In-Document Search Title: Trilinos developers SQE guide : ASC software quality engineering ...

  4. Trilinos developers SQE guide : ASC software quality engineering...

    Office of Scientific and Technical Information (OSTI)

    SQE guide : ASC software quality engineering practices. Citation Details In-Document Search Title: Trilinos developers SQE guide : ASC software quality engineering practices. ...

  5. Sanraa Media Limited India formerly Sanra Software | Open Energy...

    Open Energy Info (EERE)

    Sanraa Media Limited India formerly Sanra Software Jump to: navigation, search Name: Sanraa Media Limited India (formerly Sanra Software) Place: Chennai, Tamil Nadu, India Zip:...

  6. Catalog of Data Analysis Software | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Areas of Interest Imaging Spectroscopy Scattering General Catalog of Data Analysis Software Development of software for visualization, analysis, reduction and simulation of x-ray...

  7. Berkeley Lab Climate Software Honored for Pattern Recognition...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Software Honored for Pattern Recognition Advances Berkeley Lab Climate Software Honored for Pattern Recognition Advances September 17, 2015 Contact: Kathy Kincade, +1 510 ...

  8. Overview of HyRAM (Hydrogen Risk Assessment Models) Software...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HyRAM (Hydrogen Risk Assessment Models) Software for Science-Based Safety, Codes, and Standards Webinar Overview of HyRAM (Hydrogen Risk Assessment Models) Software for ...

  9. Software Helps Kentucky County Gauge Energy Use | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    purchase EnergyCAP software. The energy management software currently being installed in ... data analysis, the county can take action to spur change in energy usage and behavior. ...

  10. Weekly Petroleum Status Report

    U.S. Energy Information Administration (EIA) Indexed Site

    All Petrolem Reports Weekly Petroleum Status Report Data for week ending May 20, 2016 | Release Date: May 25, 2016 | Next Release Date: June 2, 2016 | full report Previous Issues Week: May 25, 2016 May 18, 2016 May 11, 2016 May 4, 2016 April 27, 2016 April 20, 2016 April 13, 2016 April 6, 2016 March 30, 2016 March 23, 2016 March 16, 2016 March 9, 2016 March 2, 2016 prior issues Go The petroleum supply situation in the context of historical information and selected prices. Released after 10:30

  11. Current status of APEX

    SciTech Connect (OSTI)

    Betts, R.R.

    1993-10-01

    The ATLAS Positron Experiment (APEX) is designed to investigate narrow structures observed in the energy spectra of positions and positron-electron coincidences produced in collisions of high Z ions with high Z targets at Coulomb barrier energies. The apparatus consists of a large diameter uniform-field solenoid mounted transverse to the beam direction. Scattered heavy ions are detected in a gas-counter array. Electrons and positrons transversing the solenoid are detected in highly segmented silicon arrays surrounded by position sensitive NaI detectors for positron identification. The concept of APEX and the current status of the apparatus will be discussed.

  12. Status of Wheeler Reservoir

    SciTech Connect (OSTI)

    Not Available

    1990-09-01

    This is one in a series of status reports prepared by the Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overview of Wheeler Reservoir summarizes reservoir purposes and operation, reservoir and watershed characteristics, reservoir uses and use impairments, and water quality and aquatic biological conditions. The information presented here is from the most recent reports, publications, and original data available. If no recent data were available, historical data were summarized. If data were completely lacking, environmental professionals with special knowledge of the resource were interviewed. 12 refs., 2 figs.

  13. Independent Verification and Validation Of SAPHIRE 8 Software Configuration Management Plan Project Number: N6423 U.S. Nuclear Regulatory Commission

    SciTech Connect (OSTI)

    Kent Norris

    2010-02-01

    The purpose of the Independent Verification and Validation (IV&V) role in the evaluation of the SAPHIRE configuration management is to assess the activities that results in the process of identifying and defining the baselines associated with the SAPHIRE software product; controlling the changes to baselines and release of baselines throughout the life cycle; recording and reporting the status of baselines and the proposed and actual changes to the baselines; and verifying the correctness and completeness of baselines.. The IV&V team began this endeavor after the software engineering and software development of SAPHIRE had already been in production.

  14. Independent Verification and Validation Of SAPHIRE 8 Software Configuration Management Plan Project Number: N6423 U.S. Nuclear Regulatory Commission

    SciTech Connect (OSTI)

    Kent Norris

    2009-10-01

    The purpose of the Independent Verification and Validation (IV&V) role in the evaluation of the SAPHIRE configuration management is to assess the activities that results in the process of identifying and defining the baselines associated with the SAPHIRE software product; controlling the changes to baselines and release of baselines throughout the life cycle; recording and reporting the status of baselines and the proposed and actual changes to the baselines; and verifying the correctness and completeness of baselines.. The IV&V team began this endeavor after the software engineering and software development of SAPHIRE had already been in production.

  15. RVA. 3-D Visualization and Analysis Software to Support Management of Oil and Gas Resources

    SciTech Connect (OSTI)

    Keefer, Donald A.; Shaffer, Eric G.; Storsved, Brynne; Vanmoer, Mark; Angrave, Lawrence; Damico, James R.; Grigsby, Nathan

    2015-12-01

    A free software application, RVA, has been developed as a plugin to the US DOE-funded ParaView visualization package, to provide support in the visualization and analysis of complex reservoirs being managed using multi-fluid EOR techniques. RVA, for Reservoir Visualization and Analysis, was developed as an open-source plugin to the 64 bit Windows version of ParaView 3.14. RVA was developed at the University of Illinois at Urbana-Champaign, with contributions from the Illinois State Geological Survey, Department of Computer Science and National Center for Supercomputing Applications. RVA was designed to utilize and enhance the state-of-the-art visualization capabilities within ParaView, readily allowing joint visualization of geologic framework and reservoir fluid simulation model results. Particular emphasis was placed on enabling visualization and analysis of simulation results highlighting multiple fluid phases, multiple properties for each fluid phase (including flow lines), multiple geologic models and multiple time steps. Additional advanced functionality was provided through the development of custom code to implement data mining capabilities. The built-in functionality of ParaView provides the capacity to process and visualize data sets ranging from small models on local desktop systems to extremely large models created and stored on remote supercomputers. The RVA plugin that we developed and the associated User Manual provide improved functionality through new software tools, and instruction in the use of ParaView-RVA, targeted to petroleum engineers and geologists in industry and research. The RVA web site (http://rva.cs.illinois.edu) provides an overview of functions, and the development web site (https://github.com/shaffer1/RVA) provides ready access to the source code, compiled binaries, user manual, and a suite of demonstration data sets. Key functionality has been included to support a range of reservoirs visualization and analysis needs, including: sophisticated connectivity analysis, cross sections through simulation results between selected wells, simplified volumetric calculations, global vertical exaggeration adjustments, ingestion of UTChem simulation results, ingestion of Isatis geostatistical framework models, interrogation of joint geologic and reservoir modeling results, joint visualization and analysis of well history files, location-targeted visualization, advanced correlation analysis, visualization of flow paths, and creation of static images and animations highlighting targeted reservoir features.

  16. ICP-MS Data Analysis Software

    Energy Science and Technology Software Center (OSTI)

    1999-01-14

    VG2Xl - this program reads binary data files generated by VG instrumentals inductively coupled plasma-mass spectrometers using PlasmaQuad Software Version 4.2.1 and 4.2.2 running under IBM OS/2. ICPCalc - this module is a macro for Microsoft Excel written in VBA (Virtual Basic for Applications) that performs data analysis for ICP-MS data required for nuclear materials that cannot readily be done with the vendor''s software. VG2GRAMS - This program reads binary data files generated by VGmoreĀ Ā» instruments inductively coupled plasma mass spectrometers using PlasmaQuad software versions 4.2.1 and 4.2.2 running under IBM OS/2.Ā«Ā less

  17. Adaptable Computing Environment/Self-Assembling Software

    Energy Science and Technology Software Center (OSTI)

    2007-09-25

    Complex software applications are difficult to learn to use and to remember how to use. Further, the user has no control over the functionality available in a given application. The software we use can be created and modified only by a relatively small group of elite, highly skilled artisans known as programmers. "Normal users" are powerless to create and modify software themselves, because the tools for software development, designed by and for programmers, are amoreĀ Ā» barrier to entry. This software, when completed, will be a user-adaptable computing environment in which the user is really in control of his/her own software, able to adapt the system, make new parts of the system interactive, and even modify the behavior of the system itself. Som key features of the basic environment that have been implemented are (a) books in bookcases, where all data is stored, (b) context-sensitive compass menus (compass, because the buttons are located in compass directions relative to the mouose cursor position), (c) importing tabular data and displaying it in a book, (d) light-weight table querying/sorting, (e) a Reach&Get capability (sort of a "smart" copy/paste that prevents the user from copying invalid data), and (f) a LogBook that automatically logs all user actions that change data or the system itself. To bootstrap toward full end-user adaptability, we implemented a set of development tools. With the development tools, compass menus can be made and customized.Ā«Ā less

  18. Decision-Support Software for Grid Operators: Transmission Topology Control for Infrastructure Resilience to the Integration of Renewable Generation

    SciTech Connect (OSTI)

    2012-03-16

    GENI Project: The CRA team is developing control technology to help grid operators more actively manage power flows and integrate renewables by optimally turning on and off entire power lines in coordination with traditional control of generation and load resources. The control technology being developed would provide grid operators with tools to help manage transmission congestion by identifying the facilities whose on/off status must change to lower generation costs, increase utilization of renewable resources and improve system reliability. The technology is based on fast optimization algorithms for the near to real-time change in the on/off status of transmission facilities and their software implementation.

  19. Software security for a network storage service

    SciTech Connect (OSTI)

    Haynes, R.A.; Kelly, S.M.

    1992-09-01

    In 1991, Sandia National Laboratories acquired a Network Storage Service (NSS) as a result of a fully competitive procurement. The Network Storage Service, which provides access to over a terabyte of data storage in a two-tiered hierarchy, had minimal software security features. Before the NSS could be placed into production, it had to be accredited by the Department of Energy, Sandia`s accrediting authority. Sandia was faced with implementing security features to allow the NSS to be operated in its secure computing network, which is a single security clearance, multiple data security level environment. This paper describes the software security design alternatives that were considered and what was ultimately implemented.

  20. Software security for a network storage service

    SciTech Connect (OSTI)

    Haynes, R.A.; Kelly, S.M.

    1992-01-01

    In 1991, Sandia National Laboratories acquired a Network Storage Service (NSS) as a result of a fully competitive procurement. The Network Storage Service, which provides access to over a terabyte of data storage in a two-tiered hierarchy, had minimal software security features. Before the NSS could be placed into production, it had to be accredited by the Department of Energy, Sandia's accrediting authority. Sandia was faced with implementing security features to allow the NSS to be operated in its secure computing network, which is a single security clearance, multiple data security level environment. This paper describes the software security design alternatives that were considered and what was ultimately implemented.

  1. SAPHIRE 8 Software Quality Assurance Oversight

    SciTech Connect (OSTI)

    Kurt G. Vedros

    2011-09-01

    The software quality assurance oversight consists of updating and maintaining revision control of the SAPHIRE 8 quality assurance program documentation and of monitoring revision control of the SAPHIRE 8 source code. This report summarizes the oversight efforts through description of the revision control system (RCS) setup, operation and contents. Documents maintained under revision control include the Acceptance Test Plan (ATP), Configuration Management Plan, Quality Assurance Plan, Software Project Plan, Requirements Traceability Matrix (RTM), System Test Plan, SDP Interface Training Manual, and the SAPHIRE 8, 'New Features and Capabilities Overview'.

  2. SSRL Light Source Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beam Current: 500.01 mA Beam Status: Beams (ACR) Loss Rate: -4.01 mA/min SPEAR Plot SPEAR Operator Messages No operator message. SSRL BEAMLINES Beamline Steering Periods Gap(mm) Field(T) K Pwr(W) Yield(Ah) 1 Open OK - 48.0 1.249 - 71 1706.83 2 Open OK - 48.0 1.249 - 71 1720.14 4 Open - 10 18.0 1.892 40.64 23464 1719.90 5 Open - 14 39.8 0.240 3.14 320 1709.96 6 Open OK 27 16.0 0.850 5.56 3891 1721.69 7 Open - 10 17.4 1.930 41.47 24424 1718.88 8 Open OK - 48.0 1.249 - 71 1680.85 9 Open - 8 24.6

  3. Sandia software guidelines: Volume 5, Tools, techniques, and methodologies

    SciTech Connect (OSTI)

    Not Available

    1989-07-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. This volume describes software tools and methodologies available to Sandia personnel for the development of software, and outlines techniques that have proven useful within the Laboratories and elsewhere. References and evaluations by Sandia personnel are included. 6 figs.

  4. Manchester Software 1099 Reporting PIA, Idaho National Laboratory |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Manchester Software 1099 Reporting PIA, Idaho National Laboratory Manchester Software 1099 Reporting PIA, Idaho National Laboratory Manchester Software 1099 Reporting PIA, Idaho National Laboratory PDF icon Manchester Software 1099 Reporting PIA, Idaho National Laboratory More Documents & Publications PIA - INL PeopleSoft - Human Resource System Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees'

  5. Analyst Tools and Quality Control Software for the ARM Data System

    SciTech Connect (OSTI)

    Moore, S.T.

    2004-12-14

    ATK Mission Research develops analyst tools and automated quality control software in order to assist the Atmospheric Radiation Measurement (ARM) Data Quality Office with their data inspection tasks. We have developed a web-based data analysis and visualization tool, called NCVweb, that allows for easy viewing of ARM NetCDF files. NCVweb, along with our library of sharable Interactive Data Language procedures and functions, allows even novice ARM researchers to be productive with ARM data with only minimal effort. We also contribute to the ARM Data Quality Office by analyzing ARM data streams, developing new quality control metrics, new diagnostic plots, and integrating this information into DQ HandS - the Data Quality Health and Status web-based explorer. We have developed several ways to detect outliers in ARM data streams and have written software to run in an automated fashion to flag these outliers.

  6. EMBODY(Environmental Modules Build System Software)

    Energy Science and Technology Software Center (OSTI)

    2009-02-09

    Embody (Environment Modules Build) is a software build tool with integrated support for the environment-modules package. The tool eases and automates the task of building and installing software packages from source or binary distributions, as well as the management of associated modulefiles. An administrator or software pool maintainer has to write a brief script for the installation process. These steps are usually described for manual execution, in a package's README or INSTALL file. It wouldmoreĀ Ā» be up to the site administrator to work out a procedure to capture the steps taken. This tool: streamlines and codifies the installation tasks in a common framework; it provides a self-documenting and unified way for maintaining package installations; uses bash shell variables and functions for portability; keeps log files of the proceedings. It is similar in intent and function to other existing tools, such as RPM, but has several novel features tailored for High Performance Computing (HPC) software deployments. The design goal is simplicity and decoupling from RPM's dependencies and its database, which enables coexistence of several builds. Useful on HPC systems, new builds can be deployed centrally to shared file systems and without affecting running jobs.Ā«Ā less

  7. Mining Bug Databases for Unidentified Software Vulnerabilities

    SciTech Connect (OSTI)

    Dumidu Wijayasekara; Milos Manic; Jason Wright; Miles McQueen

    2012-06-01

    Identifying software vulnerabilities is becoming more important as critical and sensitive systems increasingly rely on complex software systems. It has been suggested in previous work that some bugs are only identified as vulnerabilities long after the bug has been made public. These vulnerabilities are known as hidden impact vulnerabilities. This paper discusses the feasibility and necessity to mine common publicly available bug databases for vulnerabilities that are yet to be identified. We present bug database analysis of two well known and frequently used software packages, namely Linux kernel and MySQL. It is shown that for both Linux and MySQL, a significant portion of vulnerabilities that were discovered for the time period from January 2006 to April 2011 were hidden impact vulnerabilities. It is also shown that the percentage of hidden impact vulnerabilities has increased in the last two years, for both software packages. We then propose an improved hidden impact vulnerability identification methodology based on text mining bug databases, and conclude by discussing a few potential problems faced by such a classifier.

  8. Descriptive Morphology Terms For MAMA software

    SciTech Connect (OSTI)

    Ruggiero, Christy E.; Porter, Reid B.

    2014-05-21

    The table on the following pages lists a set of morphology terms for describing materials. We have organized these terms by categories. Software uses are welcome to suggest other terms that are needed to accurately describe materials. This list is intended as a initial starting point to generating a consensus terminology list.

  9. SAPHIRE 8 Software Configuration Management Plan

    SciTech Connect (OSTI)

    Curtis Smith

    2010-01-01

    The INL software developers use version control for both the formally released SAPHIRE versions, as well as for source code. For each formal release of the software, the developers perform an acceptance test: the software must pass a suite of automated tests prior to official release. Each official release of SAPHIRE is assigned a unique version identifier. The release is bundled into a standard installation package for easy and consistent set-up by individual users. Included in the release is a list of bug fixes and new features for the current release, as well as a history of those items for past releases. Each formal release of SAPHIRE will have passed an acceptance test. In addition to assignment of a unique version identifier for an official software release, each source code file is kept in a controlled library. Source code is a collection of all the computer instructions written by developers to create the finished product. The library is kept on a server, where back-ups are regularly made. This document describes the configuration management approach used as part of the SAPHIRE development.

  10. SWQM: Source Water Quality Modeling Software

    Energy Science and Technology Software Center (OSTI)

    2008-01-08

    The Source Water Quality Modeling software (SWQM) simulates the water quality conditions that reflect properties of water generated by water treatment facilities. SWQM consists of a set of Matlab scripts that model the statistical variation that is expected in a water treatment facilityĀ’s water, such as pH and chlorine levels.

  11. Gamma Detector Response and Analysis Software - Light

    Energy Science and Technology Software Center (OSTI)

    2004-06-14

    GADRAS is used to analyze gamma-ray spectra, which may be augmented by neutron count rate information. The fundamental capabilities of GADRAS are imparted by physics-based detector response functions for a variety of gamma ray and neufron detectors. The software has provisions for characterizing detector response parameters so that specta can be computed accurately over the range 30keV key to II MeV. Associated neutron detector count rates can also be computed for characterized detectors. GADRAS incorporatesmoreĀ Ā» a variety of analysis algorithms that utilize the computed spectra. The full version of GADRAS incorporates support for computation of radiation leakages from complex source models, but this capability is not supported by GADRAS-LT. GADRAS has been and will continue to be disseminated free of charge to government agencies and National Laboratories as OUO software. GADRAS-LT is a limited software version that was prepared for exclusive use of our Technology Transfer parnter Thermo Electron (TE). TE will use the software to characterize and test radiation detectors that are fabricated under the terms of our partnership. The development of these sensors has been defined as a National Security priority by our sponsor, NNSA/NA-20, by DHS/S&T, and by SNL president Paul Robinson. Although GADRAS-LT is OUO, features that are not essential to the detector development have been removed. TE will not be licensed to commercialize GADRAS-LT or to distribute it to third parties.Ā«Ā less

  12. 2006 XSD Scientific Software User Survey.

    SciTech Connect (OSTI)

    Jemian, P. R.

    2007-01-22

    In preparation for the 2006 XSD Scientific Software workshop, our committee sent a survey on June 16 to 100 users in the APS user community. This report contains the survey and the responses we received. The responses are presented in the order received.

  13. For Service Providers and Software Developers

    Broader source: Energy.gov [DOE]

    DOE welcomes use of the Asset Score by energy services companies, consultants, software providers, and other parties that offer services to building owners to improve the energy efficiency of buildings. Such providers can integrate their tools seamlessly with the Asset Score through an application programming (API) interface.

  14. Review of Quantitative Software Reliability Methods

    SciTech Connect (OSTI)

    Chu, T.L.; Yue, M.; Martinez-Guridi, M.; Lehner, J.

    2010-09-17

    The current U.S. Nuclear Regulatory Commission (NRC) licensing process for digital systems rests on deterministic engineering criteria. In its 1995 probabilistic risk assessment (PRA) policy statement, the Commission encouraged the use of PRA technology in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. Although many activities have been completed in the area of risk-informed regulation, the risk-informed analysis process for digital systems has not yet been satisfactorily developed. Since digital instrumentation and control (I&C) systems are expected to play an increasingly important role in nuclear power plant (NPP) safety, the NRC established a digital system research plan that defines a coherent set of research programs to support its regulatory needs. One of the research programs included in the NRC's digital system research plan addresses risk assessment methods and data for digital systems. Digital I&C systems have some unique characteristics, such as using software, and may have different failure causes and/or modes than analog I&C systems; hence, their incorporation into NPP PRAs entails special challenges. The objective of the NRC's digital system risk research is to identify and develop methods, analytical tools, and regulatory guidance for (1) including models of digital systems into NPP PRAs, and (2) using information on the risks of digital systems to support the NRC's risk-informed licensing and oversight activities. For several years, Brookhaven National Laboratory (BNL) has worked on NRC projects to investigate methods and tools for the probabilistic modeling of digital systems, as documented mainly in NUREG/CR-6962 and NUREG/CR-6997. However, the scope of this research principally focused on hardware failures, with limited reviews of software failure experience and software reliability methods. NRC also sponsored research at the Ohio State University investigating the modeling of digital systems using dynamic PRA methods. These efforts, documented in NUREG/CR-6901, NUREG/CR-6942, and NUREG/CR-6985, included a functional representation of the system's software but did not explicitly address failure modes caused by software defects or by inadequate design requirements. An important identified research need is to establish a commonly accepted basis for incorporating the behavior of software into digital I&C system reliability models for use in PRAs. To address this need, BNL is exploring the inclusion of software failures into the reliability models of digital I&C systems, such that their contribution to the risk of the associated NPP can be assessed.

  15. FBL Outer Can Welder Acquisition Software

    Energy Science and Technology Software Center (OSTI)

    2004-01-16

    The Outer Can Welder Data Acquisition Software (OCWDAS) was originally developed by SRTC for use at Hanford to assist in the storage of their excess plutonium in the DOE standard 3013 containers until it can be properly dispositioned using one of the approved DOE methods. After Hanford OCWDAS software was the starting point for the new version developed for FB-Line. New graphical display formats and features were added to this software to make it moremoreĀ Ā» robust and operator friendly. Several hardware changes were also made at this time and the software was modified to accommodate these as well. During the welding process, critical weld parameters such as weld current and voltage, can give valuable information about the weld. In the past, weld data from the TIG welding process, such as the bagless transfer system in FB-Line, has been monitored using strip chart recorders. The data from the weld process, recorded on the strip chart recorder traces, are reviewed to analyze the weld. The OCWDAS improves this technology by digitizing the weld data which allows for automation of the analysis process. The OCWDAS performs the necessary functions to perform the data acquisition functions during the 3013 Outer Can Welding Process. It is important to monitor the critical weld parameters, current and voltage, during a weld as they can be used to set acceptance criteria for weld acceptance. The software monitors and records the weld current, voltage, and RPM data. It also records the absolute position of the weld head during the weld process from a quadrature encoder. Digital handshaking between the AMI Welding unit and the OCWDAS ensure that both systems are operational and ready prior to the weld initiation taking place.Ā«Ā less

  16. Use of modern software technology in the redesign of OPAL trigger software

    SciTech Connect (OSTI)

    Ackerstaff, K.; Khodabandeh, A.; Shears, T.

    1998-08-01

    The OPAL experiment at LEP has a central trigger system which is modular and VME based. An upgrade of the control software was necessary to increase the flexibility and maintainability of the system. The software has been completely re-engineered in a project which lasted from January until August 1997. The use and benefits of a customized software development environment as an instrumentation of the design process, and of the project infrastructure, are described. The importance of this approach for the success of the project and its suitability for use in real-time systems is demonstrated.

  17. The Status of Glueballs

    SciTech Connect (OSTI)

    Lindenbaum, S.J. |

    1993-04-14

    The Status of Glueballs is presented considering that most popular candidates from among the isoscalars in the J{sup PC} = 0{sup ++}, 0{sup {minus}+} and 2{sup ++} channels. It is shown that in the 0{sup ++} channel the f{sub 0}(1720) which was discovered earlier (the S*{prime}(1720)) at BNL is highly likely the same state as the SLAC {theta}(1720) now that its spin has been found to be 0 instead of the 2 claimed for a long period. In the {sup ++} channel there is likely a complex of 2-3 states {zeta}/{eta}(1280), {lambda}/{eta}(1420) and {iota}/{eta}(1520) involving at least one extra isosclar. In the 2{sup ++}, the g{sub T}(2010), g{sub T}{prime}(2300) and g{sub T}{double_prime}(2340) {phi}{phi} states found in {pi}{sup {minus}} p {yields} {phi}{phi}n (OZI forbidden glueball filter channel) strikingly, approximately, completely break the OZI suppression and comprise within the errors all the {phi}{phi} cross-section. The only viable explanation of these states in the context of QCD is that they are produced by 1-3 primary 2{sup ++} glueballs. All alternate explanations in the past 15 years have failed.

  18. Status of MICE

    SciTech Connect (OSTI)

    Soler, F. J. P.

    2010-03-30

    The Muon Ionization Cooling Experiment (MICE) is an experiment currently under construction at the Rutherford Appleton Laboratory (RAL) in the UK. The aim of the experiment is to demonstrate the concept of ionization cooling for a beam of muons, crucial for the requirements of a Neutrino Factory and a Muon Collider. Muon cooling is achieved by measuring the reduction of the four dimensional transverse emittance for a beam of muons passing through low density absorbers and then accelerating the longitudinal component of the momentum using RF cavities. The absorbers are maintained in a focusing magnetic field to reduce the beta function of the beam and the RF cavities are kept inside coupling coils. The main goal of MICE is to measure a fractional drop in emittance, of order -10% for large emittance beams, with an accuracy of 1%(which imposes a requirement that the absolute emittance be measured with an accuracy of 0.1%). This paper will discuss the status of MICE, including the progress in commissioning the muon beam line at the ISIS accelerator at RAL, the construction of the different detector elements in MICE and the prospects for the future.

  19. Method for critical software event execution reliability in high integrity software

    SciTech Connect (OSTI)

    Kidd, M.E. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    This report contains viewgraphs on a method called SEER, which provides a high level of confidence that critical software driven event execution sequences faithfully exceute in the face of transient computer architecture failures in both normal and abnormal operating environments.

  20. Establishing Economic Effectiveness through Software Health-Management

    SciTech Connect (OSTI)

    Pizka, M; Panas, T

    2009-05-27

    More than two thirds of the annual software budget of large-scale organizations dealing with complex software systems is spent on the perfection, correction, and operation of existing software systems. A significant part of these running costs could be saved if the software systems that need to be constantly extende, maintained and operated were in a better technical condition. This paper proposes Software Health-Checks as a method to assess the technical condition of existing software systems and to deduce measures for improving the health of software in a structured manner. Since 2006 numerous commercial software systems with a total of 30 MLOC, implemented in various technologies, were already checked with this method. The actions suggested as a result of these Software 'Health-Checks', repeatedly yielded dramatic performance improvements, risk reductions and cost savings between 30% and 80%.

  1. 24-hour human urine and serum profiles of Bisphenol A following ingestion in soup: Individual pharmacokinetic data and emographics

    SciTech Connect (OSTI)

    Teeguarden, Justin G.; Twaddle, Nathan C.; Churchwell, Mona I.; Yang, Xiaoxia; Fisher, Jeffrey W.; Seryak, Liesel M.; Doerge, Daniel R.

    2015-09-01

    Here we present data to evaluate potential absorption of Bisphenol A through non-metabolizing tissues of the upper digestive tract. Concurrent serum and urine concentrations of d6-BPA, and its glucuronide and sulfate conjugates, were measured over a 24 h period in 10 adult male volunteers following ingestion of 30 ?g d6-BPA/kg body weight in soup. The pharmacokinetic behavior of BPA and its metabolites in this cohort (rapid absorption, complete elimination, evidence against sublingual absorption) was reported. This Data in Brief article contains the corresponding individual pharmacokinetic data, reports the demographics of the cohort and provides additional details related to the analytical methods employed and is related to [4].

  2. 24-hour human urine and serum profiles of Bisphenol A following ingestion in soup: Individual pharmacokinetic data and emographics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Teeguarden, Justin G.; Twaddle, Nathan C.; Churchwell, Mona I.; Yang, Xiaoxia; Fisher, Jeffrey W.; Seryak, Liesel M.; Doerge, Daniel R.

    2015-09-01

    Here we present data to evaluate potential absorption of Bisphenol A through non-metabolizing tissues of the upper digestive tract. Concurrent serum and urine concentrations of d6-BPA, and its glucuronide and sulfate conjugates, were measured over a 24 h period in 10 adult male volunteers following ingestion of 30 Ī¼g d6-BPA/kg body weight in soup. The pharmacokinetic behavior of BPA and its metabolites in this cohort (rapid absorption, complete elimination, evidence against sublingual absorption) was reported. This Data in Brief article contains the corresponding individual pharmacokinetic data, reports the demographics of the cohort and provides additional details related to the analyticalmoreĀ Ā» methods employed and is related to [4].Ā«Ā less

  3. Omics Metadata Management Software v. 1 (OMMS)

    Energy Science and Technology Software Center (OSTI)

    2013-09-09

    Our application, the Omics Metadata Management Software (OMMS), answers both needs, empowering experimentalists to generate intuitive, consistent metadata, and to perform bioinformatics analyses and information management tasks via a simple and intuitive web-based interface. Several use cases with short-read sequence datasets are provided to showcase the full functionality of the OMMS, from metadata curation tasks, to bioinformatics analyses and results management and downloading. The OMMS can be implemented as a stand alone-package for individual laboratories,moreĀ Ā» or can be configured for web-based deployment supporting geographically dispersed research teams. Our software was developed with open-source bundles, is flexible, extensible and easily installed and run by operators with general system administration and scripting language literacy.Ā«Ā less

  4. Omics Metadata Management Software v. 1 (OMMS)

    SciTech Connect (OSTI)

    2013-09-09

    Our application, the Omics Metadata Management Software (OMMS), answers both needs, empowering experimentalists to generate intuitive, consistent metadata, and to perform bioinformatics analyses and information management tasks via a simple and intuitive web-based interface. Several use cases with short-read sequence datasets are provided to showcase the full functionality of the OMMS, from metadata curation tasks, to bioinformatics analyses and results management and downloading. The OMMS can be implemented as a stand alone-package for individual laboratories, or can be configured for web-based deployment supporting geographically dispersed research teams. Our software was developed with open-source bundles, is flexible, extensible and easily installed and run by operators with general system administration and scripting language literacy.

  5. Software-defined Quantum Communication Systems

    SciTech Connect (OSTI)

    Humble, Travis S; Sadlier, Ronald J

    2014-01-01

    Quantum communication systems harness modern physics through state-of-the-art optical engineering to provide revolutionary capabilities. An important concern for quantum communication engineering is designing and prototyping these systems to prototype proposed capabilities. We apply the paradigm of software-defined communica- tion for engineering quantum communication systems to facilitate rapid prototyping and prototype comparisons. We detail how to decompose quantum communication terminals into functional layers defining hardware, software, and middleware concerns, and we describe how each layer behaves. Using the super-dense coding protocol as a test case, we describe implementations of both the transmitter and receiver, and we present results from numerical simulations of the behavior. We find that while the theoretical benefits of super dense coding are maintained, there is a classical overhead associated with the full implementation.

  6. Strategic Initiatives Work Group Status Overview - September...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Group Status Overview - September 2012 Documents Available for Download PDF icon September 2012 Status Overviews More Documents & Publications Strategic Initiatives Work Group ...

  7. Special Status Species | Open Energy Information

    Open Energy Info (EERE)

    Status Species Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleSpecialStatusSpecies&oldid647804" Feedback Contact needs updating Image...

  8. Property:CSC-Status | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Property Name CSC-Status Property Type String Description Geothermal Case Study Challenge (CSC) sign-up status Allows Values Available;Completed;Selected Pages...

  9. Machine Status | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Support User Support Machine Status Presentations Training & Outreach User Survey Machine Status MIRA 0 CETUS 0 VESTA 0 TUKEY 0...

  10. Machine Status and Schedule | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    @apsnotify on Twitter | RSS feed Email lists: APS Notify | XRAYOPS APSStatus App: Android Beamline Status Beamline Status Beam Properties Beam Properties Storage Ring...

  11. Contractor Earned Value Management System Certification Status...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System Certification Status More Documents & Publications VPP Participant Status EM Major Contracts Awarded Since 2006 DOE Site Facility Management Contracts Internet Posting

  12. Document Status & Schedules | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Document Status & Schedules Document Status & Schedules Schedules of Key Environmental Impact Statements This document graphically displays the milestone dates and projected ...

  13. Thermodynamic Database Population Software (DBCreate) - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Geothermal Geothermal Energy Analysis Energy Analysis Find More Like This Return to Search Thermodynamic Database Population Software (DBCreate) DOE Grant Recipients Contact GRANT About This Technology <span id="Caption"><span id="ctl00_MainContentHolder_zoomimage_defaultCaption">Geochemical modeling relies on accurate and up to date thermodynamic databases.</span></span> Geochemical modeling relies on accurate and up to date thermodynamic

  14. Building Agent Software - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Analysis Energy Analysis Find More Like This Return to Search Building Agent Software Occupancy Feedback for Building Controls National Renewable Energy Laboratory Contact NREL About This Technology Publications: PDF Document Publication Progress on Enabling an Interactive Conversation Between Commercial Building Occupants and Their Building To Improve Comfort and Energy Efficiency (948 KB) <p> Building Agent System Architecture</p> Building Agent System Architecture <p>

  15. FBL Outer Can Welder Analysis Software

    Energy Science and Technology Software Center (OSTI)

    2003-04-21

    The Outer Can Welder Analysis Software (OCWAS) was originally developed by SRTC for use at Hanford to assist in the storage of their excess plutonium in the DOE standard 3013 containers until it can be properly dispositioned using one of the approved DOE methods. After that development effort, SRS funded SRTC to develop a similar system for FB-Line for use with 3013 canister welding at SRS. More robust analysis routines and techniques were used withmoreĀ Ā» this new version as well as enhanced graphical representation of the data. During the welding process, critical weld parameters such as weld current and voltage, can give valuable information about the weld. In the past, weld data from the TIG welding process, has been monitored using strip chart recorders. The data from the weld process, recorded on the strip chart recorder traces, are reviewed to analyze the weld. To improve this process, another software package developed by SRTC, the OCW DAS, digitizes the weld data and stores the data in a file. The OCWAS automates the weld analysis process by analyzing the data obtained during the weld process. The OCWAS reads a data file that was previously collected using the OCW DAS software. The software will read the file and parse the data. The user is first prompted to enter the file name. The file is then opened and the operator name, canister identification, and Date/Time of Acquisition are read from the file and displayed on the screen. The binary weld data is then read from the file into an array until the end of the file is reached. The current, voltage, and position data are displayed on the screen in graphical format on the front panel. The weld power and resistance are calculated and are also displayed in graphical format on the front panel.Ā«Ā less

  16. PRIVACY IMPACT ASSESSMENT: INL Manchester Software

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manchester Software 1099 Reporting PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program. Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be

  17. Secure Software-Defined Radio Project

    Energy Savers [EERE]

    Software-Defined Radio Project Secure, versatile radio for "last mile" communications to utility distribution automation devices Background Communication to and from utility distribution automation devices provides greater system reliability and uptime, faster restoration, and more cost effective operations. However, many of these utility devices are located in remote locations, making secure communications difficult. Wired communication such as fiber optic cabling can be prohibitively

  18. SUNREL Energy Simulation Software | Buildings | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SUNREL Energy Simulation Software SUNRELĀ® is a hourly building energy simulation program that aids in the design of small energy-efficient buildings where the loads are dominated by the dynamic interactions between the building's envelope, its environment, and its occupants. The program is based on fundamental models of physical behavior and includes algorithms specifically for passive technologies, such as Trombe walls, programmable window shading, advanced glazings, and natural ventilation.

  19. The BAT-Swift Science Software

    SciTech Connect (OSTI)

    Palmer, D.M.; Fenimore, E.; Galassi, M.; Mclean, K.; Tavenner, T.; Barthelmy, S.; Blau, M.; Cummings, J.; Gehrels, N.; Hullinger, D.; Krimm, H.; Markwardt, C.; Mason, R.; Ong, J.; Polk, J.; Parsons, A.; Shackelford, L.; Tueller, J.; Walling, S.; Okada, Y.

    2004-09-28

    The BAT instrument tells Swift where to point to make immediate follow-up observations of GRBs. The science software on board must efficiently process {gamma}-ray events coming in at up to 34 kHz, identify rate increases that could be due to GRBs while disregarding those from known sources, and produce images to accurately and rapidly locate new Gamma-ray sources.

  20. software-disclaimer | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NETL Software Disclaimer This material was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States nor the United States Department of Energy, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.

  1. Methods For Self-Organizing Software

    DOE Patents [OSTI]

    Bouchard, Ann M.; Osbourn, Gordon C.

    2005-10-18

    A method for dynamically self-assembling and executing software is provided, containing machines that self-assemble execution sequences and data structures. In addition to ordered functions calls (found commonly in other software methods), mutual selective bonding between bonding sites of machines actuates one or more of the bonding machines. Two or more machines can be virtually isolated by a construct, called an encapsulant, containing a population of machines and potentially other encapsulants that can only bond with each other. A hierarchical software structure can be created using nested encapsulants. Multi-threading is implemented by populations of machines in different encapsulants that are interacting concurrently. Machines and encapsulants can move in and out of other encapsulants, thereby changing the functionality. Bonding between machines' sites can be deterministic or stochastic with bonding triggering a sequence of actions that can be implemented by each machine. A self-assembled execution sequence occurs as a sequence of stochastic binding between machines followed by their deterministic actuation. It is the sequence of bonding of machines that determines the execution sequence, so that the sequence of instructions need not be contiguous in memory.

  2. Software Framework for Advanced Power Plant Simulations

    SciTech Connect (OSTI)

    John Widmann; Sorin Munteanu; Aseem Jain; Pankaj Gupta; Mark Moales; Erik Ferguson; Lewis Collins; David Sloan; Woodrow Fiveland; Yi-dong Lang; Larry Biegler; Michael Locke; Simon Lingard; Jay Yun

    2010-08-01

    This report summarizes the work accomplished during the Phase II development effort of the Advanced Process Engineering Co-Simulator (APECS). The objective of the project is to develop the tools to efficiently combine high-fidelity computational fluid dynamics (CFD) models with process modeling software. During the course of the project, a robust integration controller was developed that can be used in any CAPE-OPEN compliant process modeling environment. The controller mediates the exchange of information between the process modeling software and the CFD software. Several approaches to reducing the time disparity between CFD simulations and process modeling have been investigated and implemented. These include enabling the CFD models to be run on a remote cluster and enabling multiple CFD models to be run simultaneously. Furthermore, computationally fast reduced-order models (ROMs) have been developed that can be 'trained' using the results from CFD simulations and then used directly within flowsheets. Unit operation models (both CFD and ROMs) can be uploaded to a model database and shared between multiple users.

  3. COG Software Architecture Design Description Document

    SciTech Connect (OSTI)

    Buck, R M; Lent, E M

    2009-09-21

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  4. ESTSC - Find the latest in U.S. Department of Energy Software

    Office of Scientific and Technical Information (OSTI)

    Energy Science and Technology Software Center Elink Software Center Thank you for visiting the Energy Science and Technology Software Center! We have recently redesigned our software submission and dissemination processes, and we hope you will like the new websites. To Submit Software, please use the software submission form 241.4 on E-Link. To Search for Software, please visit Scitech Connect, and use the "Software" tab to limit searches to software only. To Order Software, please

  5. Status of Hydrogen Storage Technologies

    Broader source: Energy.gov [DOE]

    The current status in terms of weight, volume, and cost of various hydrogen storage technologies is shown below. These values are estimates from storage system developers and the R&D community...

  6. Plant Operational Status - Pantex Plant

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plant Operational Status Plant Operational Status Page Content Shift 1 - Day The Pantex Plant is open for normal Day Shift operations. Plant personnel are to report as assigned. Personnel may call 477-3000, Option 1 for additional details. Shift 2 - Swing The Pantex Plant is open for normal Swing Shift operations. Plant personnel are to report as assigned. Personnel may call 477-3000, Option 1 for additional details. Shift 3 - Grave The Pantex Plant is open for normal Graveyard Shift operations.

  7. EECBG Success Story: Software Helps Kentucky County Gauge Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Helps Kentucky County Gauge Energy Use EECBG Success Story: Software Helps Kentucky County Gauge Energy Use July 27, 2010 - 1:00pm Addthis Lexington-Fayette Urban County, ...

  8. Software Configuration Management Plan for the Sodium Removal System

    SciTech Connect (OSTI)

    HILL, L.F.

    2000-03-06

    This document establishers the Software Configuration Management Plan (SCMP) for the software associated with the control system of the Sodium Removal System (SRS) located in the Interim Examination and Maintenance (IEM Cell) Facility of the FFTF Flux Test.

  9. Functional Testing Protocols for Commercial Building Efficiency Baseline Modeling Software

    SciTech Connect (OSTI)

    Jump, David; Price, Phillip N.; Granderson, Jessica; Sohn, Michael

    2013-09-06

    This document describes procedures for testing and validating proprietary baseline energy modeling software accuracy in predicting energy use over the period of interest, such as a month or a year. The procedures are designed according to the methodology used for public domain baselining software in another LBNL report that was (like the present report) prepared for Pacific Gas and Electric Company: ?Commercial Building Energy Baseline Modeling Software: Performance Metrics and Method Testing with Open Source Models and Implications for Proprietary Software Testing Protocols? (referred to here as the ?Model Analysis Report?). The test procedure focuses on the quality of the software?s predictions rather than on the specific algorithms used to predict energy use. In this way the software vendor is not required to divulge or share proprietary information about how their software works, while enabling stakeholders to assess its performance.

  10. Software solutions manage the definition, operation, maintenance and configuration control of the National Ignition Facility

    SciTech Connect (OSTI)

    Dobson, D; Churby, A; Krieger, E; Maloy, D; White, K

    2011-07-25

    The National Ignition Facility (NIF) is the world's largest laser composed of millions of individual parts brought together to form one massive assembly. Maintaining control of the physical definition, status and configuration of this structure is a monumental undertaking yet critical to the validity of the shot experiment data and the safe operation of the facility. The NIF business application suite of software provides the means to effectively manage the definition, build, operation, maintenance and configuration control of all components of the National Ignition Facility. State of the art Computer Aided Design software applications are used to generate a virtual model and assemblies. Engineering bills of material are controlled through the Enterprise Configuration Management System. This data structure is passed to the Enterprise Resource Planning system to create a manufacturing bill of material. Specific parts are serialized then tracked along their entire lifecycle providing visibility to the location and status of optical, target and diagnostic components that are key to assessing pre-shot machine readiness. Nearly forty thousand items requiring preventive, reactive and calibration maintenance are tracked through the System Maintenance & Reliability Tracking application to ensure proper operation. Radiological tracking applications ensure proper stewardship of radiological and hazardous materials and help provide a safe working environment for NIF personnel.

  11. Supplemental Assessment of the Y-12 Groundwater Protection Program Using Monitoring and Remediation Optimization System Software

    SciTech Connect (OSTI)

    Elvado Environmental LLC; GSI Environmental LLC

    2009-01-01

    A supplemental quantitative assessment of the Groundwater Protection Program (GWPP) at the Y-12 National Security Complex (Y-12) in Oak Ridge, TN was performed using the Monitoring and Remediation Optimization System (MAROS) software. This application was previously used as part of a similar quantitative assessment of the GWPP completed in December 2005, hereafter referenced as the 'baseline' MAROS assessment (BWXT Y-12 L.L.C. [BWXT] 2005). The MAROS software contains modules that apply statistical analysis techniques to an existing GWPP analytical database in conjunction with hydrogeologic factors, regulatory framework, and the location of potential receptors, to recommend an improved groundwater monitoring network and optimum sampling frequency for individual monitoring locations. The goal of this supplemental MAROS assessment of the Y-12 GWPP is to review and update monitoring network optimization recommendations resulting from the 2005 baseline report using data collected through December 2007. The supplemental MAROS assessment is based on the findings of the baseline MAROS assessment and includes only the groundwater sampling locations (wells and natural springs) currently granted 'Active' status in accordance with the Y-12 GWPP Monitoring Optimization Plan (MOP). The results of the baseline MAROS assessment provided technical rationale regarding the 'Active' status designations defined in the MOP (BWXT 2006). One objective of the current report is to provide a quantitative review of data collected from Active but infrequently sampled wells to confirm concentrations at these locations. This supplemental MAROS assessment does not include the extensive qualitative evaluations similar to those presented in the baseline report.

  12. Building Life Cycle Cost Programs Software Installation Troubleshooting |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Software Installation Troubleshooting Building Life Cycle Cost Programs Software Installation Troubleshooting Having trouble downloading the Building Life Cycle Cost (BLCC) Programs software? Macintosh Operating Systems If you are receiving the "Download.app is damaged and can't be opened" error message when you attempt to install the BLCC software on your Macintosh operating system, visit the Tech Recipes website for instruction on how to change your security

  13. Workplace Charging Challenge Partner: Vernier Software & Technology |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Vernier Software & Technology Workplace Charging Challenge Partner: Vernier Software & Technology Workplace Charging Challenge Partner: Vernier Software & Technology Joined the Challenge: June 2015 Headquarters: Beaverton, OR Charging Location: Beaverton, OR Domestic Employees: 105 As part of their commitment to the environment and to business practices that are Earth friendly, Vernier Software & Technology provide to employees a variety of alternative

  14. Tax Deduction Qualified Software Tas version 9.3.1

    Broader source: Energy.gov [DOE]

    Information about the Tas version 9.3.1 qualified computer software and federal tax incentive requirements for commercial buildings.

  15. Software-defined Radio Based Wireless Tomography: Experimental

    Office of Scientific and Technical Information (OSTI)

    Demonstration and Verification (Journal Article) | SciTech Connect Journal Article: Software-defined Radio Based Wireless Tomography: Experimental Demonstration and Verification Citation Details In-Document Search Title: Software-defined Radio Based Wireless Tomography: Experimental Demonstration and Verification This letter presents an experimental demonstration of software-defined-radio-based wireless tomography using computer-hosted radio devices called Universal Software Radio Peripheral

  16. Nuclear Safety Software & Quality Assurance | Department of Energy

    Energy Savers [EERE]

    Safety Software & Quality Assurance Nuclear Safety Software & Quality Assurance Nuclear Safety Software & Quality Assurance In support of DOE O 410.1, Central Technical Authority Responsibilities Regarding Nuclear Safety Requirements, the Chief of Nuclear Safety (CNS) provides operational awareness, oversight, and assistance to Environmental Management (EM) Headquarters, field offices, and their contractors in the areas of nuclear safety Quality Assurance (QA) and Software Quality

  17. Facility Software Quality Assurance (SQA) for Captal Project Critical

    Energy Savers [EERE]

    Decisions RM | Department of Energy Software Quality Assurance (SQA) for Captal Project Critical Decisions RM Facility Software Quality Assurance (SQA) for Captal Project Critical Decisions RM The purpose of this Software Quality Assurance for Capital Project Critical Decision Review Module (SQA RM) is to identify, integrate, and clarify, in one EM document, the SQA performance objectives, criteria, and guidance needed to review project documents and activities. PDF icon Facility Software

  18. Safety Software Quality Assurance - Central Registry | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Quality Assurance - Central Registry Safety Software Quality Assurance - Central Registry The Department of Energy maintains a list of "toolbox" codes that have been evaluated against DOE Safety Software Quality Assurance (SSQA) requirements of DOE O 414.1D, Quality Assurance, and its safety software guidance, DOE G 414.1-4, and accepted as toolbox codes. The toolbox codes are used by DOE contractors to perform calculations and to develop data used to establish the safety

  19. Tax Deduction Qualified Software Tas version 9.3.2

    Broader source: Energy.gov [DOE]

    Information about the Tas version 9.3.2 qualified computer software and federal tax incentive requirements for commercial buildings.

  20. Trilinos developers SQE guide : ASC software quality engineering practices.

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Technical Report: Trilinos developers SQE guide : ASC software quality engineering practices. Citation Details In-Document Search Title: Trilinos developers SQE guide : ASC software quality engineering practices. The Trilinos Project is an effort to develop algorithms and enabling technologies within an object-oriented software framework for the solution of large-scale, complex multi-physics engineering and scientific problems. A new software capability

  1. Software Dedication Using NQA-1 - June 2012 | Department of Energy

    Energy Savers [EERE]

    Using NQA-1 - June 2012 Software Dedication Using NQA-1 - June 2012 Presentation on guidance of Software Dedication Using ASME NQA-1 Approach. Sample CGD plan and detailed review. PDF icon Software Dedication Using NQA-1 - June 2012 More Documents & Publications EIS-0418: Draft Environmental Impact Statement EIS-0472: Mitigation Action Plan EIS-0413: Final Environmental Impact Statement

  2. Prometheus Reactor I&C Software Development Methodology, for Action

    SciTech Connect (OSTI)

    T. Hamilton

    2005-07-30

    The purpose of this letter is to submit the Reactor Instrumentation and Control (I&C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I&C Software Development Process Manual and Reactor Module Software Development Plan to NR for information.

  3. Representation of Limited Rights Data and Restricted Computer Software |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Representation of Limited Rights Data and Restricted Computer Software Representation of Limited Rights Data and Restricted Computer Software PDF icon Representation of Limited Rights Data and Restricted Computer Software More Documents & Publications CLB-1003.PDF&#0; Intellectual Property Provisions (CSB-1003) Cooperative Agreement Research, Development, or Demonstration Domestic Small Businesses CDLB-1003.PDF&#0;

  4. SRS Software Verification Pre Operational and Startup Test

    SciTech Connect (OSTI)

    HILL, L.F.

    2000-10-18

    This document defines testing for the software used to control the Sodium Removal System (SRS). The testing is conducted off-line from the. physical plant by using a simulator built-in to the software. This provides verification of proper software operation prior to performing the operational acceptance tests with the actual plant hardware.

  5. The Program for Climate Model Diagnosis and Intercomparison (PCMDI) Software Development: Applications, Infrastructure, and Middleware/Networks

    SciTech Connect (OSTI)

    Williams, Dean N.

    2011-06-30

    The status of and future plans for the Program for Climate Model Diagnosis and Intercomparison (PCMDI) hinge on software that PCMDI is either currently distributing or plans to distribute to the climate community in the near future. These software products include standard conventions, national and international federated infrastructures, and community analysis and visualization tools. This report also mentions other secondary software not necessarily led by or developed at PCMDI to provide a complete picture of the overarching applications, infrastructures, and middleware/networks. Much of the software described anticipates the use of future technologies envisioned over the span of next year to 10 years. These technologies, together with the software, will be the catalyst required to address extreme-scale data warehousing, scalability issues, and service-level requirements for a diverse set of well-known projects essential for predicting climate change. These tools, unlike the previous static analysis tools of the past, will support the co-existence of many users in a productive, shared virtual environment. This advanced technological world driven by extreme-scale computing and the data it generates will increase scientists’ productivity, exploit national and international relationships, and push research to new levels of understanding.

  6. Microgrid and Inverter Control and Simulator Software

    SciTech Connect (OSTI)

    2012-09-13

    A collection of software that can simulate the operation of an inverter on a microgrid or control a real inverter. In addition, it can simulate the control of multiple nodes on a microgrid." Application: Simulation of inverters and microgrids; control of inverters on microgrids." The MMI submodule is designed to control custom inverter hardware, and to simulate that hardware. The INVERTER submodule is only the simulator code, and is of an earlier generation than the simulator in MMI. The MICROGRID submodule is an agent-based simulator of multiple nodes on a microgrid which presents a web interface. The WIND submodule produces movies of wind data with a web interface.

  7. The VAXONLINE software system at Fermilab

    SciTech Connect (OSTI)

    White, V.; Heinicke, P.; Berman, E.; Constanta-Fanourakis, P.; MacKinnon, B.; Moore, C.; Nicinski, T.; Petravick, D.; Pordes, R.; Quigg, L.

    1987-06-01

    The VAXONLINE software system, started in late 1984, is now in use at 12 experiments at Fermilab, with at least one VAX or MicroVax. Data acquisition features now provide for the collection and combination of data from one or more sources, via a list-driven Event Builder program. Supported sources include CAMAC, FASTBUS, Front-end PDP-11's, Disk, Tape, DECnet, and other processors running VAXONLINE. This paper describes the functionality provided by the VAXONLINE system, gives performance figures, and discusses the ongoing program of enhancements.

  8. Bagless Transfer System Welder Analysis Software

    Energy Science and Technology Software Center (OSTI)

    2003-10-01

    The Bagless Transfer System Welder Analysis Software (BTS WAS) was developed by SRTC for use with the Bagless Transfer System. During the welding process, critical weld parameters such as weld current and voltage, can give valuable informaitoin about the weld. In the past, weld data from the TIG welding process, such as the bagless transfer system in FB-Line, has been monitored using strip chart recorders. The data from the weld process, recorded on the stripmoreĀ Ā» chart recorder traces, were reviewed by the supervisor using a procedure and criteria to analyze the weld. This hand checking can be tedious and time consuming. To improve this process, another software package developed by SRTC, the BTS DAS, digitizes the weld data and stores the weld data in a file. The BTS WAS automates the weld analysis process by analyzing the data obtained during the weld process against the same weld criteria that the supervisor currently users. Of course with the automated analysis system the supervisor is still provided the same information in the same chart display format so he can also manually review the data as desired. The BTS WAS reads in a data file that was prevously collected using the BTS DAS software. The software will read the file and parse the data. The user is first prompted to enter the file name. The file is then opened and the operator name and Date/Time of Acquisition are read from the file and displayed on the screen. The binary weld data is then read from the file into an array until the end of the file is reached. The shunt and weld current, voltage, RPM, and position data are displayed on the screen in graphical formats on the front panel. The weld power and resistance are calculated and are also displayed in graphical format on the front panel. Individual tack analysis data is provided for each of the three tacks. The main weld and downslope data is also displayed.Ā«Ā less

  9. LANSCE | Lujan Center | Software | popLA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    popLA Texture Analysis and Modeling Albeit out-dated by now, the popLA package still offers functionality in demand by the texture community. Please note that the development of the core package stopped in 1994. This means the software may require emulators such as VirtualBox to run on a given system. There is a python based GUI version of popLA under development and this version is also available upon request. We encourage researchers interested in popLA to also look at the following much more

  10. SolTrace Optical Analysis Software

    Energy Science and Technology Software Center (OSTI)

    2001-12-31

    SolTrace is a software package that models solar power optical systems and analyzes their performance. SolTrace can model parabolic trough collectors, point-focus concentrating systems, and power towers. It rapidly displays and saves data as scatter plots, flux maps, and performance graphs. SolTrace can model optical geometry as a series of stages, composed of optical elements that possess attributes such as shape, contour, and optical quality. It can also model any number of stages containing anymoreĀ Ā» number of different elements, and it features an extensive variety of available shapes and contours.Ā«Ā less

  11. Burst Buffer Architecture and Software Roadmap

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Burst Buffer Architecture Burst Buffer Architecture and Software Roadmap NERSC has been working with Cray to bring BurstBuffer technology to the users of Cori. The NERSC BurstBuffer is based on Cray DataWarp that utilizes flash or SSD (solid-state drive) technologies to significantly increase the I/O performance on Cori. Motivation In order to meet users' requests for better I/O performance NERSC is installing a Burst Buffer. There are two aspects of I/O performance. One aspect is the total

  12. Automated Vulnerability Detection for Compiled Smart Grid Software

    SciTech Connect (OSTI)

    Prowell, Stacy J; Pleszkoch, Mark G; Sayre, Kirk D; Linger, Richard C

    2012-01-01

    While testing performed with proper experimental controls can provide scientifically quantifiable evidence that software does not contain unintentional vulnerabilities (bugs), it is insufficient to show that intentional vulnerabilities exist, and impractical to certify devices for the expected long lifetimes of use. For both of these needs, rigorous analysis of the software itself is essential. Automated software behavior computation applies rigorous static software analysis methods based on function extraction (FX) to compiled software to detect vulnerabilities, intentional or unintentional, and to verify critical functionality. This analysis is based on the compiled firmware, takes into account machine precision, and does not rely on heuristics or approximations early in the analysis.

  13. SUSTAINABLE REMEDIATION SOFTWARE TOOL EXERCISE AND EVALUATION

    SciTech Connect (OSTI)

    Kohn, J.; Nichols, R.; Looney, B.

    2011-05-12

    The goal of this study was to examine two different software tools designed to account for the environmental impacts of remediation projects. Three case studies from the Savannah River Site (SRS) near Aiken, SC were used to exercise SiteWise (SW) and Sustainable Remediation Tool (SRT) by including both traditional and novel remediation techniques, contaminants, and contaminated media. This study combined retrospective analysis of implemented projects with prospective analysis of options that were not implemented. Input data were derived from engineering plans, project reports, and planning documents with a few factors supplied from calculations based on Life Cycle Assessment (LCA). Conclusions drawn from software output were generally consistent within a tool; both tools identified the same remediation options as the 'best' for a given site. Magnitudes of impacts varied between the two tools, and it was not always possible to identify the source of the disagreement. The tools differed in their quantitative approaches: SRT based impacts on specific contaminants, media, and site geometry and modeled contaminant removal. SW based impacts on processes and equipment instead of chemical modeling. While SW was able to handle greater variety in remediation scenarios, it did not include a measure of the effectiveness of the scenario.

  14. Bagless Transfer System Welder Data Acquisition Software

    Energy Science and Technology Software Center (OSTI)

    2003-09-30

    The Bagless Transfer System Welder Data Acquisition Software (BTS DAS) was developed by SRTC to replace a strip chart recorder that has been in place since the design of the BTS. During the welding process, critical weld parameters such as weld current and voltage, can give valuable information about the weld. In the past, weld data from the TID welding process, has been monitored using strip chart recorders. The data from the weld process, recordedmoreĀ Ā» on the strip chart recorder traces, are reviewed to analyze the weld. The BTS DAS improves this technology by digitizing the weld data which allows for automation of the analysis process. Also, the data files are now stored digitally as well as a hard copy printout, so they can be reanalyzed if needed. The BTS DAS performs the necessary functions to perform the data acquisition functions during the BTS Welding Process. It is important to monitor the critical weld parameters, current and voltage, during a weld as they can be used to set acceptance criteria for weld acceptance. The software monitors and records the weld current, voltage, and RPM data. The welder DAS is a passive device and does not control the welder. The BTS control system interfaces directly with the welder and the BTS DAS. Digital handshaking is used between the BTS DAS and the BTS control system to ensure that the DAS is ready to weld prior to allowing the operator to initiate the welding process.Ā«Ā less

  15. Compiling software for a hierarchical distributed processing system

    DOE Patents [OSTI]

    Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

    2013-12-31

    Compiling software for a hierarchical distributed processing system including providing to one or more compiling nodes software to be compiled, wherein at least a portion of the software to be compiled is to be executed by one or more nodes; compiling, by the compiling node, the software; maintaining, by the compiling node, any compiled software to be executed on the compiling node; selecting, by the compiling node, one or more nodes in a next tier of the hierarchy of the distributed processing system in dependence upon whether any compiled software is for the selected node or the selected node's descendents; sending to the selected node only the compiled software to be executed by the selected node or selected node's descendent.

  16. LARGE BLOCK TEST STATUS REPORT

    SciTech Connect (OSTI)

    Wilder, D. G.; Blair, S. C.; Buscheck, T.; Carloson, R. C.; Lee, K.; Meike, A.; Ramirez, J. L.; Sevougian, D.

    1997-08-26

    This report is intended to serve as a status report, which essentially transmits the data that have been collected to date on the Large Block Test (LBT). The analyses of data will be performed during FY98, and then a complete report will be prepared. This status report includes introductory material that is not needed merely to transmit data but is available at this time and therefore included. As such, this status report will serve as the template for the future report, and the information is thus preserved. The United States Department of Energy (DOE) is investigatinq the suitability of Yucca Mountain (YM) as a potential site for the nation's first high-level nuclear waste repository. As shown in Fig. 1-1, the site is located about 120 km northwest of Las Vegas, Nevada, in an area of uninhabited desert.

  17. Using CORE Model-Based Systems Engineering Software to Support Program Management in the U.S. Department of Energy Office of the Biomass Project: Preprint

    SciTech Connect (OSTI)

    Riley, C.; Sandor, D.; Simpkins, P.

    2006-11-01

    This paper describes how a model-based systems engineering software, CORE, is helping the U. S. Department of Energy's Office of Biomass Program assist with bringing biomass-derived biofuels to the market. This software tool provides information to guide informed decision-making as biomass-to-biofuels systems are advanced from concept to commercial adoption. It facilitates management and communication of program status by automatically generating custom reports, Gantt charts, and tables using the widely available programs of Microsoft Word, Project and Excel.

  18. Review of existing reactive transport software

    SciTech Connect (OSTI)

    Glassley, W., LLNL

    1998-02-03

    Simulations of thermal and hydrological evolution following the potential emplacement of a subterranean nuclear waste repository at Yucca Mountain, NV provide data that suggest the inevitability of dependent, simultaneous chemical evolution in this system. These chemical changes will modify significantly both the magnitude and structure of local porosity and permeability; hence, they will have a dynamic feedback effect on the evolving thermal and hydrological regime. Yet, despite this intimate interdependence of transport and chemical processes, a rigorous quantitative analysis of the post- emplacement environment that incorporates this critical feedback mechanism has not been completed to date. As an initial step in this direction, the present document outlines the fundamental chemical and transport processes that must be accounted for in such an analysis, and reviews the inventory of existing software that encodes these processed in explicitly coupled form. A companion report describes the prioritization of specific capabilities that are needed for modeling post-emplacement reactive transport at Yucca Mountain.

  19. Microgrid and Inverter Control and Simulator Software

    Energy Science and Technology Software Center (OSTI)

    2012-09-13

    A collection of software that can simulate the operation of an inverter on a microgrid or control a real inverter. In addition, it can simulate the control of multiple nodes on a microgrid." Application: Simulation of inverters and microgrids; control of inverters on microgrids." The MMI submodule is designed to control custom inverter hardware, and to simulate that hardware. The INVERTER submodule is only the simulator code, and is of an earlier generation than themoreĀ Ā» simulator in MMI. The MICROGRID submodule is an agent-based simulator of multiple nodes on a microgrid which presents a web interface. The WIND submodule produces movies of wind data with a web interface.Ā«Ā less

  20. SAPHIRE 8 Software Quality Assurance Plan

    SciTech Connect (OSTI)

    Curtis Smith

    2010-02-01

    This Quality Assurance (QA) Plan documents the QA activities that will be managed by the INL related to JCN N6423. The NRC developed the SAPHIRE computer code for performing probabilistic risk assessments (PRAs) using a personal computer (PC) at the Idaho National Laboratory (INL) under Job Code Number (JCN) L1429. SAPHIRE started out as a feasibility study for a PRA code to be run on a desktop personal PC and evolved through several phases into a state-of-the-art PRA code. The developmental activity of SAPHIRE was the result of two concurrent important events: The tremendous expansion of PC software and hardware capability of the 90s and the onset of a risk-informed regulation era.

  1. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan : ASC software quality engineering practices Version 3.0.

    SciTech Connect (OSTI)

    Turgeon, Jennifer L.; Minana, Molly A.; Hackney, Patricia; Pilch, Martin M.

    2009-01-01

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in the US Department of Energy/National Nuclear Security Agency (DOE/NNSA) Quality Criteria, Revision 10 (QC-1) as 'conformance to customer requirements and expectations'. This quality plan defines the SNL ASC Program software quality engineering (SQE) practices and provides a mapping of these practices to the SNL Corporate Process Requirement (CPR) 001.3.6; 'Corporate Software Engineering Excellence'. This plan also identifies ASC management's and the software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals. This SNL ASC Software Quality Plan establishes the signatories commitments to improving software products by applying cost-effective SQE practices. This plan enumerates the SQE practices that comprise the development of SNL ASC's software products and explains the project teams opportunities for tailoring and implementing the practices.

  2. SAPHIRE 8 Software Independent Verification and Validation Plan

    SciTech Connect (OSTI)

    Rae J. Nims; Kent M. Norris

    2010-02-01

    SAPHIRE 8 is being developed with a phased or cyclic iterative rapid application development methodology. Due to this approach, a similar approach is being taken for the IV&V activities on each vital software object. The IV&V plan is structured around NUREG/BR-0167, ā€œSoftware Quality Assurance Program and Guidelines,ā€ February 1993. The Nuclear Regulatory Research Office Instruction No.: PRM-12, ā€œSoftware Quality Assurance for RES Sponsored Codes,ā€ March 26, 2007 specifies that RES-sponsored software is to be evaluated against NUREG/BR-0167. Per the guidance in NUREG/BR-0167, SAPHIRE is classified as ā€œLevel 1.ā€ Level 1 software corresponds to technical application software used in a safety decision.

  3. The Hidden Job Requirements for a Software Engineer

    SciTech Connect (OSTI)

    Marinovici, Maria C.; Kirkham, Harold; Glass, Kevin A.

    2014-01-09

    In a world increasingly operated by computers, where innovation depends on software, the software engineerā€™s role is changing continuously and gaining new dimensions. In commercial software development as well as scientific research environments, the way software developers are perceived is changing, because they are more important to the business than ever before. Nowadays, their job requires skills extending beyond the regular job description posted by HR, and more is expected. To advance and thrive in their new roles, the software engineers must embrace change, and practice the themes of the new era (integration, collaboration and optimization). The challenges may be somehow intimidating for freshly graduated software engineers. Through this paper the authors hope to set them on a path for success, by helping them relinquish their fear of the unknown.

  4. Small job development software project documentation for the activity management system. Revision 1

    SciTech Connect (OSTI)

    Gates, T.A.; Burdick, M.B.

    1994-09-22

    This document contains all the required software development documentation as required by WHC-CM-3-10, software practices.

  5. Building Energy Monitoring Software Aids Native Alaskan Villages |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Building Energy Monitoring Software Aids Native Alaskan Villages Building Energy Monitoring Software Aids Native Alaskan Villages March 9, 2016 - 1:08pm Addthis Energy Department financial support for Alaska is helping remote facilities like the Toksook Bay Well House to identify critical savings opportunities with energy monitoring software. Toksook Bay has a population of about 600. Energy Department financial support for Alaska is helping remote facilities like the

  6. Final Report: Enabling Exascale Hardware and Software Design through

    Office of Scientific and Technical Information (OSTI)

    Scalable System Virtualization (Technical Report) | SciTech Connect Technical Report: Final Report: Enabling Exascale Hardware and Software Design through Scalable System Virtualization Citation Details In-Document Search Title: Final Report: Enabling Exascale Hardware and Software Design through Scalable System Virtualization In this grant, we enhanced the Palacios virtual machine monitor to increase its scalability and suitability for addressing exascale system software design issues. This

  7. Technical Meeting: Software Framework for Transactive Energy: VOLTTRON(tm)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 | Department of Energy Software Framework for Transactive Energy: VOLTTRON(tm) 2015 Technical Meeting: Software Framework for Transactive Energy: VOLTTRON(tm) 2015 On July 23 and 24, 2015, BTO held technical meetings graciously hosted by the Virginia Tech Advanced Research Institute on a Software Framework for Transactive Energy: VOLTTRON(tm). The purpose of this meeting was to provide an overview of the VOLTTRON platform, present new developments and uses, discuss advancement of the

  8. PNNL Moves Cybersecurity Software and a Novel Disinfecting System Beyond

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Lab | Department of Energy PNNL Moves Cybersecurity Software and a Novel Disinfecting System Beyond the Lab PNNL Moves Cybersecurity Software and a Novel Disinfecting System Beyond the Lab January 28, 2016 - 11:42am Addthis Original content from Pacific Northwest National Laboratory Eric Francavilla, PNNL: (509) 372-4066 Frances White, PNNL: (509) 375-6904 RICHLAND, Wash. - Software that helps cybersecurity analysts prevent hacks and a microbial disinfecting system that kills with an

  9. RAVEN and Dynamic Probabilistic Risk Assessment: Software overview

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect RAVEN and Dynamic Probabilistic Risk Assessment: Software overview Citation Details In-Document Search Title: RAVEN and Dynamic Probabilistic Risk Assessment: Software overview RAVEN is a generic software framework to perform parametric and probabilistic analysis based on the response of complex system codes. The initial development was aimed to provide dynamic risk analysis capabilities to the Thermo-Hydraulic code RELAP-7 [], currently under development at

  10. DOE Commercial Building Energy Asset Score: Software Development for Phase

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    II Building Types | Department of Energy Score: Software Development for Phase II Building Types DOE Commercial Building Energy Asset Score: Software Development for Phase II Building Types DOE Commercial Building Energy Asset Score: Software Development for Phase II Building Types PDF icon asset_score_assumptions_july_2013.pdf More Documents & Publications Weekend/Weekday Ozone Study in the South Coast Air Basin Users Perspective on Advanced Fuel Cell Bus Technology In Plane

  11. Software speeds detection of diseases and cancer-treatment targets

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software speeds detection of diseases Software speeds detection of diseases and cancer-treatment targets The Lab has released an updated version of software that is now capable of identifying DNA from viruses and all parts of the Tree of Life. December 1, 2014 With Sequedex, a laptop computer can analyze DNA sequences faster than any current DNA sequencer can create them. With Sequedex, a laptop computer can analyze DNA sequences faster than any current DNA sequencer can create them. Contact

  12. Enhancing User Customization through Novel Software Architecture for Utility Scale Solar Siting Software

    SciTech Connect (OSTI)

    Brant Peery; Sam Alessi; Randy Lee; Leng Vang; Scott Brown; David Solan; Dan Ames

    2014-06-01

    There is a need for a spatial decision support application that allows users to create customized metrics for comparing proposed locations of a new solar installation. This document discusses how PVMapper was designed to overcome the customization problem through the development of loosely coupled spatial and decision components in a JavaScript plugin architecture. This allows the user to easily add functionality and data to the system. The paper also explains how PVMapper provides the user with a dynamic and customizable decision tool that enables them to visually modify the formulas that are used in the decision algorithms that convert data to comparable metrics. The technologies that make up the presentation and calculation software stack are outlined. This document also explains the architecture that allows the tool to grow through custom plugins created by the software users. Some discussion is given on the difficulties encountered while designing the system.

  13. Training Work Group Status Overview - July 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training Work Group Status Overview - July 2012 Documents Available for Download PDF icon July 2012 Status Overviews More Documents & Publications Training Work Group Status ...

  14. Workforce Retention Work Group Status Overview - July 2012 |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work Group Status Overview - July 2012 Documents Available for Download PDF icon July 2012 Status Overviews More Documents & Publications Workforce Retention Work Group Status ...

  15. Strategic Initiatives Work Group Status Overview - July 2012...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work Group Status Overview - July 2012 Documents Available for Download PDF icon July 2012 Status Overviews More Documents & Publications Strategic Initiatives Work Group Status ...

  16. Complete LNG Terminal Status Maps | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Complete LNG Terminal Status Maps Complete LNG Terminal Status Maps A series of slides showing the status of various LNG terminals (existing, under construction, proposed, etc.) in...

  17. Status and Future of TRANSCOM | Department of Energy

    Office of Environmental Management (EM)

    and Future of TRANSCOM Status and Future of TRANSCOM Current Program Status Upcoming Changes Glimpse at Future Options DOE Commitments PDF icon Status and Future of TRANSCOM More...

  18. Thoughts From the 2012 Whitney Software Symposium | GE Global...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Big Data, Modeling and Simulation, High Performance Computing and the Industrial Internet as key technological enablers of GE's Software initiatives. We enjoyed speakers from...

  19. Agriculture and Land Use National Greenhouse Gas Inventory Software...

    Open Energy Info (EERE)

    Agriculture and Land Use National Greenhouse Gas Inventory Software Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Agriculture and Land Use National Greenhouse Gas...

  20. Information Technology Specialist (SystemsAnalysis/Applications Software)

    Broader source: Energy.gov [DOE]

    This position is located in Asset Management and Engineering Applications (JST), Software Development Operations (JS), Information Technology (J), Bonneville Power Administration (BPA). Asset...

  1. Building Energy Management Open-Source Software Development ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Objectives We propose to develop a web-based BEMOSS software platform for ... controllers Advanced monitoring - Web-service interface allowing access from ...

  2. Comparison of Software Models for Energy Savings from Cool Roofs...

    Office of Scientific and Technical Information (OSTI)

    Title: Comparison of Software Models for Energy Savings from Cool Roofs A web-based Roof ... This tool employs modern web technologies, usability design, and national average defaults ...

  3. Nuclear Energy Advanced Modeling and Simulation (NEAMS) Software

    Energy Savers [EERE]

    Verification and Validation (V&V) Plan Requirements | Department of Energy Software Verification and Validation (V&V) Plan Requirements Nuclear Energy Advanced Modeling and Simulation (NEAMS) Software Verification and Validation (V&V) Plan Requirements The purpose of the NEAMS Software V&V Plan is to define what the NEAMS program expects in terms of V&V for the computational models that are developed under NEAMS. PDF icon NEAMS Software Verification and Validation Plan

  4. PNNL Moves Cybersecurity Software and a Novel Disinfecting System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Original content from Pacific Northwest National Laboratory Eric Francavilla, PNNL: (509) 372-4066 Frances White, PNNL: (509) 375-6904 RICHLAND, Wash. - Software that helps ...

  5. Experimental apparatus and software design for dynamic long-term...

    Office of Scientific and Technical Information (OSTI)

    reliability testing of a spring-mass MEMS device. Citation Details In-Document Search Title: Experimental apparatus and software design for dynamic long-term reliability ...

  6. Nuclear Safety Software & Quality Assurance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Nuclear Safety Software & Quality Assurance In support of DOE O 410.1, Central Technical Authority Responsibilities Regarding Nuclear Safety Requirements, the Chief of Nuclear...

  7. Device and Software to Measure Thermal Impedance of Electrochemical...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Device and Software to Measure Thermal Impedance of Electrochemical Systems National Renewable Energy Laboratory Contact NREL About This Technology Technology Marketing Summary ...

  8. Technical Meeting on the Software Framework for Transactive Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Transactive energy in buildings will rely on robust control software that enables automatic, market-based intra-building efficiency optimizations. BTO believes that the best way to ...

  9. V-232: Cisco ASA Software TFTP Protocol Inspection Denial of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-232: Cisco ASA Software TFTP Protocol Inspection Denial of Service Vulnerability August ... U-197: Cisco Adaptive Security Appliances Denial of Service Vulnerability V-071: Cisco ASA ...

  10. Software speeds detection of diseases and cancer-treatment targets

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software speeds detection of diseases and cancer-treatment targets Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All...

  11. ORNL Researchers Develop 'Autotune' Software to Make it Quicker...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joshua New have developed automated, or "Autotune," calibration software, which reduces the amount of ... "The Autotune methodology uses multiparameter optimization techniques, ...

  12. Comparison of software models for energy savings from cool roofs...

    Office of Scientific and Technical Information (OSTI)

    Comparison of software models for energy savings from cool roofs Citation Details In-Document Search This content will become publicly available on September 4, 2017 Title: ...

  13. "Turn-Key" Open Source Software Solutions for Energy Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This FOA seeks to develop a "turn key" BAS solution using Open-Source software and architecture specifically tailored to small and medium buildings to advance opportunities for ...

  14. Software Discovery at San Ramon | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and asset life cycle optimization to fuel consumption management and plant automation. Software Development Tools and Methodologies These tools provide best practices for...

  15. Scalable System Software for Parallel Programming | Argonne Leadership...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the software environment for leadership-class applications through programming models, high-performance IO, and analysis. In all three areas, researchers are exploring ways...

  16. EPA Tier2 Submit Software Webpage | Open Energy Information

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for EPA Tier2 Submit Software Webpage Citation United States Environmental...

  17. ESnet, Coalition Partners Announce Global Breakthrough for Software...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Software-Defined Networking Proving true SDN principles and deployment at Internet-scale, ONOS-based peering router and Vandervecken SDN controller stack successfully...

  18. Qualified Software for Calculating Commercial Building Tax Deductions

    Broader source: Energy.gov [DOE]

    On this page you'll find a list of qualified computer software for calculating commercial building energy and power cost savings that meet federal tax incentive requirements.

  19. JBlulce Data Acquisition Software for Macromolecular Crystallography

    Energy Science and Technology Software Center (OSTI)

    2010-06-01

    JBlulce (Java Beam Line Universal Integrated Configuration Environment is a data acquisition software for macromolecular crystallography conforming user interface of the SSRL Blulce that has become a de-factor standard in the field. Besides this interface conformity, JBlulce is a unique system in terms of architecture, speec, capability and osftware implementation. It features only two software layers, the JBlulce clients and the EPICS servers, as compared to three layers present in Blulc and most of similarmoreĀ Ā» systems. This layers reduction provides a faster communication with hardware and an easier access to advanced hardware capabilities like on-the-fly scanning. Then JBlulc clients are designed to operate in parallel with the other beamline controls which streamlines the tasks performed by staff such as beamline preparation, maitenance, audting and user assistance. Another distinction is the deployment of multiple plugins that can be written in any programming languag thus involving more staff into the development. further on, JBlulce makes use of unified motion controls allowing for easy scanning and optimizing of any beamline component. Finally, the graphic interface is implemented in Java making full use of rich Java libraries and Jave IDE for debugging. to compare, Blulce user interface is implemented with aging Tcl/tk language providing very restricted capabilities. JBlulce makes full use of the industrial power and wide drivers selection of EPICS in controlling hardware; all hardware commuication is routed via multiple EPICS servers residing on local area network. JBlulce also includes several EPICS State Notation servers aimed at making hardware communication more robust. Besides using EPICS for controlling hardware, JBlulce extensively uses EPICS databases for efficien communications between multiple instances of JBlulce clients and JBlulce pplugins that can run in parallel on different computers. All of the above makes JBlulce one of the biggest and most sophisticated EPICS client projects to date. JBlulce configuraion is stored in my SQL database which provides flexibility in tuning the system. The database is also accessible by the plugins. From the users perspective JBlulce provides all standard features of data acquisition software for macromolecular crystallography plus such unique capabilities as:one click beamline energy change that may involve switching undulator harmonics, mirrors lanes and beam realignment, automated diffraction rtastering for finding small crystals and swwet spots on poorly diffracting crystals with automated scoring of raster cells by the number of reflections; data collection along a vector; automated on-the-fly fluorescent tastering, a faster and lower-irradiation compliment to the diffraction raster; fully automated fluorescence measurements for MAD that include signal optimization, fast on the fly energy scanning and automated adapting of scan range to chemical shifts; fly-scan mimibeam realighment; automated loop and crystal centering, controls for sample automounter, automated screening, data collectin audting, remoate access and a lot more.Ā«Ā less

  20. ARM - Ingest Contacts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brian Ermold Pacific Northwest National Laboratory brian.ermold@pnnl.gov 509.375.2277 Annette Koontz Pacific Northwest National Laboratory annette.koontz@pnnl.gov 509.375.3609...

  1. Ingestion resistant seal assembly

    DOE Patents [OSTI]

    Little, David A.

    2011-12-13

    A seal assembly limits gas leakage from a hot gas path to one or more disc cavities in a gas turbine engine. The seal assembly includes a seal apparatus associated with a blade structure including a row of airfoils. The seal apparatus includes an annular inner shroud associated with adjacent stationary components, a wing member, and a first wing flange. The wing member extends axially from the blade structure toward the annular inner shroud. The first wing flange extends radially outwardly from the wing member toward the annular inner shroud. A plurality of regions including one or more recirculation zones are defined between the blade structure and the annular inner shroud that recirculate working gas therein back toward the hot gas path.

  2. KTM Experimental Complex Project Status

    SciTech Connect (OSTI)

    Tazhibayeva, I.L.; Azizov, E.A.; Krylov, V.A.; Shkolnik, V.S.; Velikhov, E.P.; Obysov, N.A.; Tukhvatulin, Sh.T.; Tikhomirov, L.N.; Shestakov, V.P.; Filatov, O.G

    2005-04-15

    A review of KTM experimental complex project status, which is aimed the creation of a Kazakhstani spherical tokamak for study and tests materials and components of future fusion reactors. Revised basic parameters of the KTM facility and ground of the changes taking into account new plasma core geometry, new design of vacuum chamber and modified magnetic system, transport sluice and movable divertor devices, and additional RF-heating system are presented here.

  3. SuperNEMO Project Status

    SciTech Connect (OSTI)

    Chauveau, E. [Universite de Bordeaux, Centre d'Etudes Nucleaires de Bordeaux Gradignan, UMR 5797, F-33175 Gradignan (France) and CNRS/IN2P3, Centre d'Etudes Nucleaires de Bordeaux Gradignan, UMR 5797, F-33175 Gradignan (France)

    2009-11-09

    The SuperNEMO experiment aims to reach a sensitivity up to 10{sup 26} years on the half-life of neutrinoless double beta decay. The chosen way is to build a 'tracko-calo' detector with at least 100 kg of betabeta isotope. The current status of the main R and D tasks will be presented: enrichment and production of source foil, radiopurity control, tracker and calorimeter.

  4. PIRANHA: A Knowledge Discovery Engine Software

    Energy Science and Technology Software Center (OSTI)

    2008-12-18

    Clustering textual information provides a number of useful capabilities for a PIRANHA user. Finding Similar Documents : A user can select a document of interest, and then quickly find other documents that are a close match. For example, a user may have an e-mail of interest found on a captured computer. Clustering allows for similar e-mail on other computers to be quickly found, thus potentially establishing a link. Document Sampling: A set of documents willmoreĀ Ā» usually contain common themes or topic. Representative documents from these themes can be quickly found, and presented to a user. For example, a captured hard drive may have thousands of documents representing many different topics, i.e., form finances to methods to favorite restaurants. Ten or twenty representative documents from these themes can be found, and used by a user to quickly determine what areas need further attention. Classifying Documents: A set of representative documents can be used by a user to define a topic of interest, and then related documents can be added to that set. This allows a user to pick specific documents that are of interest, perhaps nuclear materials, then allows the software agents to automatically put related document into the same nuclear materials folder.Ā«Ā less

  5. Tool Support for Software Lookup Table Optimization

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wilcox, Chris; Strout, Michelle Mills; Bieman, James M.

    2011-01-01

    A number of scientific applications are performance-limited by expressions that repeatedly call costly elementary functions. Lookup table (LUT) optimization accelerates the evaluation of such functions by reusing previously computed results. LUT methods can speed up applications that tolerate an approximation of function results, thereby achieving a high level of fuzzy reuse. One problem with LUT optimization is the difficulty of controlling the tradeoff between performance and accuracy. The current practice of manual LUT optimization adds programming effort by requiring extensive experimentation to make this tradeoff, and such hand tuning can obfuscate algorithms. In this paper we describe a methodology andmoreĀ Ā» tool implementation to improve the application of software LUT optimization. Our Mesa tool implements source-to-source transformations for C or C++ code to automate the tedious and error-prone aspects of LUT generation such as domain profiling, error analysis, and code generation. We evaluate Mesa with five scientific applications. Our results show a performance improvement of 3.0Ɨ and 6.9Ɨ for two molecular biology algorithms, 1.4Ɨ for a molecular dynamics program, 2.1Ɨ to 2.8Ɨ for a neural network application, and 4.6Ɨ for a hydrology calculation. We find that Mesa enables LUT optimization with more control over accuracy and less effort than manual approaches.Ā«Ā less

  6. Software-Defined Solutions for Managing Energy Use in Small to Medium Sized Commercial Buildings

    SciTech Connect (OSTI)

    Peffer, Therese; Blumstein, Carl; Culler, David; Modera, Mark; Meier, Alan

    2015-09-10

    The Project uses state-of-the-art computer science to extend the benefits of Building Automation Systems (BAS) typically found in large buildings (>100,000 square foot) to medium-sized commercial buildings (<50,000 sq ft). The BAS developed in this project, termed OpenBAS, uses an open-source and open software architecture platform, user interface, and plug-and-play control devices to facilitate adoption of energy efficiency strategies in the commercial building sector throughout the United States. At the heart of this ā€œturn keyā€ BAS is the platform with three types of controllersā€”thermostat, lighting controller, and general controllerā€”that are easily ā€œdiscoveredā€ by the platform in a plug-and-play fashion. The user interface showcases the platform and provides the control system set-up, system status display and means of automatically mapping the control points in the system.

  7. Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for contract years 2009, 200S, 2007, 2006, 2005 for the following DOE prime contracts. WTS - WIPP Carlsbad, NM CWI - Idaho Cleanup Project (ICP) WVES - Interim Ends State...

  8. Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    change. (Technical Report) | SciTech Connect Statistical surrogate models for prediction of high-consequence climate change. Citation Details In-Document Search Title: Statistical surrogate models for prediction of high-consequence climate change. In safety engineering, performance metrics are defined using probabilistic risk assessments focused on the low-probability, high-consequence tail of the distribution of possible events, as opposed to best estimates based on central tendencies. We

  9. EECBG Success Story: Software Helps Kentucky County Gauge Energy Use

    Broader source: Energy.gov [DOE]

    Lexington-Fayette Urban County, Kentucky invested $140,000 of a $2.7 million Energy Efficiency and Conservation Block Grant (EECBG) to purchase EnergyCAP software. The energy management software will allow the county to track energy usage and greenhouse gas emission levels in targeted properties as well as process reports and analyze utility bills. Learn more.

  10. Mining Software Usage with the Automatic Library Tracking Database (ALTD)

    SciTech Connect (OSTI)

    Hadri, Bilel; Fahey, Mark R

    2013-01-01

    Tracking software usage is important for HPC centers, computer vendors, code developers and funding agencies to provide more efficient and targeted software support, and to forecast needs and guide HPC software effort towards the Exascale era. However, accurately tracking software usage on HPC systems has been a challenging task. In this paper, we present a tool called Automatic Library Tracking Database (ALTD) that has been developed and put in production on several Cray systems. The ALTD infrastructure prototype automatically and transparently stores information about libraries linked into an application at compilation time and also the executables launched in a batch job. We will illustrate the usage of libraries, compilers and third party software applications on a system managed by the National Institute for Computational Sciences.

  11. Software reliability and safety in nuclear reactor protection systems

    SciTech Connect (OSTI)

    Lawrence, J.D.

    1993-11-01

    Planning the development, use and regulation of computer systems in nuclear reactor protection systems in such a way as to enhance reliability and safety is a complex issue. This report is one of a series of reports from the Computer Safety and Reliability Group, Lawrence Livermore that investigates different aspects of computer software in reactor National Laboratory, that investigates different aspects of computer software in reactor protection systems. There are two central themes in the report, First, software considerations cannot be fully understood in isolation from computer hardware and application considerations. Second, the process of engineering reliability and safety into a computer system requires activities to be carried out throughout the software life cycle. The report discusses the many activities that can be carried out during the software life cycle to improve the safety and reliability of the resulting product. The viewpoint is primarily that of the assessor, or auditor.

  12. Software Synthesis for High Productivity Exascale Computing

    SciTech Connect (OSTI)

    Bodik, Rastislav

    2010-09-01

    Over the three years of our project, we accomplished three key milestones: We demonstrated how ideas from generative programming and software synthesis can help support the development of bulk-synchronous distributed memory kernels. These ideas are realized in a new language called MSL, a C-like language that combines synthesis features with high level notations for array manipulation and bulk-synchronous parallelism to simplify the semantic analysis required for synthesis. We also demonstrated that these high level notations map easily to low level C code and show that the performance of this generated code matches that of handwritten Fortran. Second, we introduced the idea of solver-aided domain-specific languages (SDSLs), which are an emerging class of computer-aided programming systems. SDSLs ease the construction of programs by automating tasks such as verification, debugging, synthesis, and non-deterministic execution. SDSLs are implemented by translating the DSL program into logical constraints. Next, we developed a symbolic virtual machine called Rosette, which simplifies the construction of such SDSLs and their compilers. We have used Rosette to build SynthCL, a subset of OpenCL that supports synthesis. Third, we developed novel numeric algorithms that move as little data as possible, either between levels of a memory hierarchy or between parallel processors over a network. We achieved progress in three aspects of this problem. First we determined lower bounds on communication. Second, we compared these lower bounds to widely used versions of these algorithms, and noted that these widely used algorithms usually communicate asymptotically more than is necessary. Third, we identified or invented new algorithms for most linear algebra problems that do attain these lower bounds, and demonstrated large speed-ups in theory and practice.

  13. Cluster computing software for GATE simulations

    SciTech Connect (OSTI)

    Beenhouwer, Jan de; Staelens, Steven; Kruecker, Dirk; Ferrer, Ludovic; D'Asseler, Yves; Lemahieu, Ignace; Rannou, Fernando R.

    2007-06-15

    Geometry and tracking (GEANT4) is a Monte Carlo package designed for high energy physics experiments. It is used as the basis layer for Monte Carlo simulations of nuclear medicine acquisition systems in GEANT4 Application for Tomographic Emission (GATE). GATE allows the user to realistically model experiments using accurate physics models and time synchronization for detector movement through a script language contained in a macro file. The downside of this high accuracy is long computation time. This paper describes a platform independent computing approach for running GATE simulations on a cluster of computers in order to reduce the overall simulation time. Our software automatically creates fully resolved, nonparametrized macros accompanied with an on-the-fly generated cluster specific submit file used to launch the simulations. The scalability of GATE simulations on a cluster is investigated for two imaging modalities, positron emission tomography (PET) and single photon emission computed tomography (SPECT). Due to a higher sensitivity, PET simulations are characterized by relatively high data output rates that create rather large output files. SPECT simulations, on the other hand, have lower data output rates but require a long collimator setup time. Both of these characteristics hamper scalability as a function of the number of CPUs. The scalability of PET simulations is improved here by the development of a fast output merger. The scalability of SPECT simulations is improved by greatly reducing the collimator setup time. Accordingly, these two new developments result in higher scalability for both PET and SPECT simulations and reduce the computation time to more practical values.

  14. LLCEDATA and LLCECALC for Windows version 1.0, Volume 3: Software verification and validation

    SciTech Connect (OSTI)

    McFadden, J.G.

    1998-09-04

    LLCEDATA and LLCECALC for Windows are user-friendly computer software programs that work together to determine the proper waste designation, handling, and disposition requirements for Long Length Contaminated Equipment (LLCE). LLCEDATA reads from a variety of data bases to produce an equipment data file(EDF) that represents a snapshot of both the LLCE and the tank from which it originates. LLCECALC reads the EDF and the gamma assay file (AV2) that is produced by the flexible Receiver Gamma Energy Analysis System. LLCECALC performs corrections to the AV2 file as it is being read and characterizes the LLCE. Both programs produce a variety of reports, including a characterization report and a status report. The status report documents each action taken by the user, LLCEDATA, and LLCECALC. Documentation for LLCEDATA and LLCECALC for Windows is available in three volumes. Volume 1 is a user`s manual, which is intended as a quick reference for both LLCEDATA and LLCECALC. Volume 2 is a technical manual, which discusses system limitations and provides recommendations to the LLCE process. Volume 3 documents LLCEDATA and LLCECALC`s verification and validation. Two of the three installation test cases, from Volume 1, are independently confirmed. Data bases used in LLCEDATA are verified and referenced. Both phases of LLCECALC process gamma and characterization, are extensively tested to verify that the methodology and algorithms used are correct.

  15. Status of LLNL granite projects

    SciTech Connect (OSTI)

    Ramspott, L.D.

    1980-12-31

    The status of LLNL Projects dealing with nuclear waste disposal in granitic rocks is reviewed. This review covers work done subsequent to the June 1979 Workshop on Thermomechanical Modeling for a Hardrock Waste Repository and is prepared for the July 1980 Workshop on Thermomechanical-Hydrochemical Modeling for a Hardrock Waste Repository. Topics reviewed include laboratory determination of thermal, mechanical, and transport properties of rocks at conditions simulating a deep geologic repository, and field testing at the Climax granitic stock at the USDOE Nevada Test Site.

  16. Rapid/PSM - lessons learned from using PSA for plant status monitoring

    SciTech Connect (OSTI)

    Chu, B.B.; Young, J.; Weinzimmer, F.

    1987-01-01

    Power plant operation requires decisions that can affect both the availability of the plant and its compliance with operating guidelines. Taking equipment out of service may affect the ability of the plant to produce power at a certain power level and may also affect the status of the plant with regard to technical specifications. However, plant operators and supervisors possess few tools that can rapidly determine plant availability and system status, can assess the impact on plant health (e.g., likelihood of continued operation) of taking equipment in or out of service, and can present information on required actions or desired alternatives. The plant status monitor (PSM), which is a part of Rapid software development under the risk assessment program of the Nuclear Power Division at the Electric Power Research Institute (EPRI), is designed to provide such information to plant personnel as an aid to their decision making. The Rapid/PSM can assist the management of plant safety and productivity and can minimize the potential technical specification violations. This paper describes the lessons learned from the development and demonstration of Rapid/PSM software at GPU Nuclear Corporation's (GPUN's) Oyster Creek Nuclear Generation Plant.

  17. Oil shale: Technology status report

    SciTech Connect (OSTI)

    Not Available

    1986-10-01

    This report documents the status of the US Department of Energy's (DOE) Oil Shale Program as of the end of FY 86. The report consists of (1) a status of oil shale development, (2) a description of the DOE Oil Shale Program, (3) an FY 86 oil shale research summary, and (4) a summary of FY 86 accomplishments. Discoveries were made in FY 86 about the physical and chemical properties and behavior of oil shales, process chemistry and kinetics, in situ retorting, advanced processes, and the environmental behavior and fate of wastes. The DOE Oil Shale Program shows an increasing emphasis on eastern US oil shales and in the development of advanced oil shale processing concepts. With the award to Foster Wheeler for the design of oil shale conceptual plants, the first step in the development of a systems analysis capability for the complete oil shale process has been taken. Unocal's Parachute Creek project, the only commercial oil shale plant operating in the United States, is operating at about 4000 bbl/day. The shale oil is upgraded at Parachute Creek for input to a conventional refinery. 67 refs., 21 figs., 3 tabs.

  18. Software configuration management plan for the Hanford site technical database

    SciTech Connect (OSTI)

    GRAVES, N.J.

    1999-05-10

    The Hanford Site Technical Database (HSTD) is used as the repository/source for the technical requirements baseline and programmatic data input via the Hanford Site and major Hanford Project Systems Engineering (SE) activities. The Hanford Site SE effort has created an integrated technical baseline for the Hanford Site that supports SE processes at the Site and project levels which is captured in the HSTD. The HSTD has been implemented in Ascent Logic Corporation (ALC) Commercial Off-The-Shelf (COTS) package referred to as the Requirements Driven Design (RDD) software. This Software Configuration Management Plan (SCMP) provides a process and means to control and manage software upgrades to the HSTD system.

  19. Applying Agile MethodstoWeapon/Weapon-Related Software

    SciTech Connect (OSTI)

    Adams, D; Armendariz, M; Blackledge, M; Campbell, F; Cloninger, M; Cox, L; Davis, J; Elliott, M; Granger, K; Hans, S; Kuhn, C; Lackner, M; Loo, P; Matthews, S; Morrell, K; Owens, C; Peercy, D; Pope, G; Quirk, R; Schilling, D; Stewart, A; Tran, A; Ward, R; Williamson, M

    2007-05-02

    This white paper provides information and guidance to the Department of Energy (DOE) sites on Agile software development methods and the impact of their application on weapon/weapon-related software development. The purpose of this white paper is to provide an overview of Agile methods, examine the accepted interpretations/uses/practices of these methodologies, and discuss the applicability of Agile methods with respect to Nuclear Weapons Complex (NWC) Technical Business Practices (TBPs). It also provides recommendations on the application of Agile methods to the development of weapon/weapon-related software.

  20. Clearance Status Inquiries | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Clearance Status Inquiries At any time during the clearance process, you may contact the Personnel Security Help Desk to inquire about the status of your clearance. You can also visit the Applicant Tracking System (ATS) online to find out the status of your clearance (see below). Specific timeframes cannot be guaranteed as to how long it will take for the Office of Personnel Management (OPM) to conduct the background investigation or for the investigation to be adjudicated by a Personnel

  1. Outreach and Collaboration Program Status and Accomplishments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outreach and Collaboration Program Status and Accomplishments 2008-2009 Outreach and Collaboration has helped HSS expand the DOE's sphere of communication and influence through ...

  2. Molecular catalytic coal liquid conversion. Quarterly status...

    Office of Scientific and Technical Information (OSTI)

    July--September 1995 Citation Details In-Document Search Title: Molecular catalytic coal liquid conversion. Quarterly status report, July--September 1995 You are accessing...

  3. Molecular catalytic coal liquid conversion. Quarterly status...

    Office of Scientific and Technical Information (OSTI)

    report Citation Details In-Document Search Title: Molecular catalytic coal liquid conversion. Quarterly status report You are accessing a document from the Department of...

  4. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1: ASC software quality engineering practices, Version 2.0.

    SciTech Connect (OSTI)

    Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  5. A Stochastic Process-Based Look at Software Reliability | GE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A hidden bug in released software seems at a first glance, to be analogous to an undetected crack in the blades of an operating gas turbine. Well, there is a crucial difference ...

  6. High-performance, distributed computing software libraries and services

    Energy Science and Technology Software Center (OSTI)

    2002-01-24

    The Globus toolkit provides basic Grid software infrastructure (i.e. middleware), to facilitate the development of applications which securely integrate geographically separated resources, including computers, storage systems, instruments, immersive environments, etc.

  7. HOMERĀ® Energy Modeling Software V2.19

    Energy Science and Technology Software Center (OSTI)

    2008-12-31

    The HOMERĀ® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  8. HOMERĀ® Energy Modeling Software V2.67

    Energy Science and Technology Software Center (OSTI)

    2008-12-31

    The HOMERĀ® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  9. HOMERĀ® Energy Modeling Software V2.65

    Energy Science and Technology Software Center (OSTI)

    2008-12-31

    The HOMERĀ® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  10. HOMERĀ® Energy Modeling Software V2.64

    Energy Science and Technology Software Center (OSTI)

    2003-12-31

    The HOMERĀ® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  11. HOMERĀ® Energy Modeling Software V2.63

    Energy Science and Technology Software Center (OSTI)

    2003-12-31

    The HOMERĀ® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  12. HOMERĀ® Energy Modeling Software V2.0

    Energy Science and Technology Software Center (OSTI)

    2003-12-31

    The HOMERĀ® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  13. Building Energy Management Open-Source Software (BEMOSS)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Other software used: ZeroMQ 6 BEMOSS I nteroperability CommunicaMon T echnologies q Ethernet ( IEEE 8 02.3) q Serial I nterface ( RS---485) q ZigBee ( IEEE 8 02.15.4) q ...

  14. Open-Source Software in Computational Research: A Case Study

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Syamlal, Madhava; O'Brien, Thomas J.; Benyahia, Sofiane; Gel, Aytekin; Pannala, Sreekanth

    2008-01-01

    A case study of open-source (OS) development of the computational research software MFIX, used for multiphase computational fluid dynamics simulations, is presented here. The verification and validation steps required for constructing modern computational software and the advantages of OS development in those steps are discussed. The infrastructure used for enabling the OS development of MFIX is described. The impact of OS development on computational research and education in gas-solids flow, as well as the dissemination of information to other areas such as geophysical and volcanology research, is demonstrated. This study shows that the advantages of OS development were realized inmoreĀ Ā» the case of MFIX: verification by many users, which enhances software quality; the use of software as a means for accumulating and exchanging information; the facilitation of peer review of the results of computational research.Ā«Ā less

  15. Software Platform Evaluation - Verifiable Fuel Cycle Simulation (VISION) Model

    SciTech Connect (OSTI)

    J. J. Jacobson; D. E. Shropshire; W. B. West

    2005-11-01

    The purpose of this Software Platform Evaluation (SPE) is to document the top-level evaluation of potential software platforms on which to construct a simulation model that satisfies the requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). See the Software Requirements Specification for Verifiable Fuel Cycle Simulation (VISION) Model (INEEL/EXT-05-02643, Rev. 0) for a discussion of the objective and scope of the VISION model. VISION is intended to serve as a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies. This document will serve as a guide for selecting the most appropriate software platform for VISION. This is a ā€œliving documentā€ that will be modified over the course of the execution of this work.

  16. The SDAV Software Frameworks for Visualization and Analysis on...

    Office of Scientific and Technical Information (OSTI)

    Conference: The SDAV Software Frameworks for Visualization and Analysis on Next-Generation Multi-Core and Many-Core Architectures Citation Details In-Document Search Title: The ...

  17. FAQS Reference Guide ā€“ Safety Software Quality Assurance

    Broader source: Energy.gov [DOE]

    This reference guide has been developed to address the competency statements in the (March 2011) edition of DOE-STD-1172-2011, Safety Software Quality Assurance Functional Area Qualification Standard.

  18. GE Software Expert Julian Keith Loren Discusses Innovation and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Expert Julian Keith Loren Discusses Innovation and the Industrial Internet Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window)...

  19. System Software and Tools for High Performance Computing Environments: A report on the findings of the Pasadena Workshop, April 14--16, 1992

    SciTech Connect (OSTI)

    Sterling, T.; Messina, P.; Chen, M.

    1993-04-01

    The Pasadena Workshop on System Software and Tools for High Performance Computing Environments was held at the Jet Propulsion Laboratory from April 14 through April 16, 1992. The workshop was sponsored by a number of Federal agencies committed to the advancement of high performance computing (HPC) both as a means to advance their respective missions and as a national resource to enhance American productivity and competitiveness. Over a hundred experts in related fields from industry, academia, and government were invited to participate in this effort to assess the current status of software technology in support of HPC systems. The overall objectives of the workshop were to understand the requirements and current limitations of HPC software technology and to contribute to a basis for establishing new directions in research and development for software technology in HPC environments. This report includes reports written by the participants of the workshop`s seven working groups. Materials presented at the workshop are reproduced in appendices. Additional chapters summarize the findings and analyze their implications for future directions in HPC software technology development.

  20. Experimental apparatus and software design for dynamic long-term

    Office of Scientific and Technical Information (OSTI)

    reliability testing of a spring-mass MEMS device. (Conference) | SciTech Connect Experimental apparatus and software design for dynamic long-term reliability testing of a spring-mass MEMS device. Citation Details In-Document Search Title: Experimental apparatus and software design for dynamic long-term reliability testing of a spring-mass MEMS device. No abstract prepared. Authors: Parson, Ted Blair ; Reu, Phillip L. ; Tanner, Danelle Mary ; Boyce, Brad Lee ; Epp, David S. Publication Date:

  1. Intelligent Software Agents for Enhancing Sensor Networks Monitoring of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Changing Conditions - Energy Innovation Portal Energy Analysis Energy Analysis Find More Like This Return to Search Intelligent Software Agents for Enhancing Sensor Networks Monitoring of Changing Conditions Oak Ridge National Laboratory Contact ORNL About This Technology Technology Marketing SummaryIntelligent software agents developed by ORNL researchers can be used with sensor networks in distributed and centralized computing systems to enhance detection and response by sensors to

  2. Representation of Limited Rights Data and Restricted Computer Software |

    Energy Savers [EERE]

    Department of Energy Representation of Limited Rights Data and Restricted Computer Software Representation of Limited Rights Data and Restricted Computer Software Any data delivered under an award resulting from this announcement is subject to the Rights in Data - General or the Rights in Data - Programs Covered Under Special Data Statutes clause (See Intellectual Property Provisions). Under these clauses, the Recipient may withhold from delivery data that qualify as limited rights data or

  3. NREL Releases New Version of Energy Evaluation Software - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL NREL Releases New Version of Energy Evaluation Software January 4, 2005 Golden, Colo. - Researchers at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) recently released Version 2.1 of HOMER, a micropower optimization software model that simplifies the task of evaluating design options for both off-grid and grid-connected power systems. Users supply information about electrical loads, renewable resources and component costs and HOMER simulates multiple designs

  4. Request for Information (RFI): Advanced Manufacturing Office (AMO) Software

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tools | Department of Energy Advanced Manufacturing Office (AMO) Software Tools Request for Information (RFI): Advanced Manufacturing Office (AMO) Software Tools July 25, 2014 - 1:00pm Addthis Funding: This RFI is not a Funding Opportunity Announcement (FOA); therefore, EERE is not accepting applications at this time. Open Date: 07/25/2014 Close Date: 09/30/2014 Funding Organization: The Advanced Manufacturing Office of the Office of Energy Efficiency and Renewable Energy Funding Number:

  5. Berkeley Lab Climate Software Honored for Pattern Recognition Advances

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Software Honored for Pattern Recognition Advances Berkeley Lab Climate Software Honored for Pattern Recognition Advances September 17, 2015 Contact: Kathy Kincade, +1 510 495 2124, kkincade@lbl.gov The Toolkit for Extreme Climate Analysis (TECA), developed at Lawrence Berkeley National Laboratory to help climate researchers detect extreme weather events in large datasets, has been recognized for its achievements in solving large-scale pattern recognition problems. "TECA: Petascale

  6. Representation of Limited Rights Data and Restricted Computer Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REPRESENTATION OF LIMITED RIGHTS DATA AND RESTRICTED COMPUTER SOFTWARE Applicant: Funding Opportunity Announcement/Solicitation No.: (a) Any data delivered under an award resulting from this announcement is subject to the Rights in Data - General or the Rights in Data - Programs Covered Under Special Data Statutes clause (See Intellectual Property Provisions). Under these clauses, the Recipient may withhold from delivery data that qualify as limited rights data or restricted computer software.

  7. Software Engineer (Scientific Application) | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Engineer (Scientific Application) Department: Information Technology Staff: ENG 04 Requisition Number: 1600370 Position Summary: The Princeton Plasma Physics Laboratory is a Department of Energy (DOE) funded national facility that performs cutting-edge research in the field of plasma physics and nuclear fusion in concert with Princeton University. This Scientific Applications Software Engineer position is with the Controls and Data Acquisition (CODAC) group, responsible for the

  8. Radioisotope thermoelectric generator transportation system subsystem 143 software development plan

    SciTech Connect (OSTI)

    King, D.A.

    1994-11-10

    This plan describes the activities to be performed and the controls to be applied to the process of specifying, developing, and qualifying the data acquisition software for the Radioisotope Thermoelectric Generator (RTG) Transportation System Subsystem 143 Instrumentation and Data Acquisition System (IDAS). This plan will serve as a software quality assurance plan, a verification and validation (V and V) plan, and a configuration management plan.

  9. Computational Systems & Software Environment | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Computational Systems & Software Environment The mission of this national sub-program is to build integrated, balanced, and scalable computational capabilities to meet the predictive simulation requirements of NNSA. This sub-program strives to provide users of ASC computing resources a stable and seamless computing environment for all ASC-deployed platforms. Along with these powerful systems that ASC will maintain and field the supporting software infrastructure that the

  10. Advanced Analysis Software Key to New, Energy-Efficient Technologies -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Innovation Portal Wind Energy Wind Energy Hydropower, Wave and Tidal Hydropower, Wave and Tidal Energy Analysis Energy Analysis Building Energy Efficiency Building Energy Efficiency Find More Like This Return to Search Advanced Analysis Software Key to New, Energy-Efficient Technologies Leveraging Scientific and Engineering Know-How to Advance Sources of Renewable Energy Argonne National Laboratory Contact ANL About This Technology <p> 1. Using the analytical software, experts

  11. System Software Resilience. (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    System Software Resilience. Citation Details In-Document Search Title: System Software Resilience. Abstract not provided. Authors: Ferreira, Kurt Brian Publication Date: 2014-05-01 OSTI Identifier: 1145816 Report Number(s): SAND2014-4240C 518360 DOE Contract Number: DE-AC04-94AL85000 Resource Type: Conference Resource Relation: Conference: External Advisory Board held June 2-3, 2014 in Albuquerque, NM.; Related Information: Proposed for presentation at the External Advisory Board held June 2-3,

  12. Building Energy Optimization (BEopt) Software | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Buildings Ā» Building America Ā» Building Energy Optimization (BEopt) Software Building Energy Optimization (BEopt) Software BEopt 2.4 Now Available! With the release of BEopt Version 2.4 Beta, users can now perform modeling analysis on multifamily buildings! Other new options for input include: heat pump clothes dryers; electric/gas clothes dryers; condensing tank water heaters; door construction and area; window areas defined by faƧade-specific WWRs; and 2013 ASHRAE 62.2

  13. Status of the Majorana Demonstrator

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cuesta, C.; Abgrall, N.; Arnquist, I. J.; Avignone, III, F. T.; Barabash, A. S.; Bertrand, F. E.; Brudanin, V.; Busch, M.; Buuck, M.; Byram, D.; et al

    2015-08-06

    The Majorana Collaboration is constructing the Majorana Demonstrator, an ultra-low background, 40-kg modular high purity Ge detector array to search for neutrinoless double-beta decay in 76Ge. In view of the next generation of tonne-scale Ge-based neutrinoless double-beta decay searches that will probe the neutrino mass scale in the inverted-hierarchy region, a major goal of the Demonstrator is to demonstrate a path forward to achieving a background rate at or below 1 count/tonne/year in the 4 keV region of interest around the Q-value at 2039 keV. Lastly, the current status of the Demonstrator is discussed, as are plans for its completion.

  14. NIF Projects Controls and Information Systems Software Quality Assurance Plan

    SciTech Connect (OSTI)

    Fishler, B

    2011-03-18

    Quality achievement for the National Ignition Facility (NIF) and the National Ignition Campaign (NIC) is the responsibility of the NIF Projects line organization as described in the NIF and Photon Science Directorate Quality Assurance Plan (NIF QA Plan). This Software Quality Assurance Plan (SQAP) is subordinate to the NIF QA Plan and establishes quality assurance (QA) activities for the software subsystems within Controls and Information Systems (CIS). This SQAP implements an activity level software quality assurance plan for NIF Projects as required by the LLNL Institutional Software Quality Assurance Program (ISQAP). Planned QA activities help achieve, assess, and maintain appropriate quality of software developed and/or acquired for control systems, shot data systems, laser performance modeling systems, business applications, industrial control and safety systems, and information technology systems. The objective of this SQAP is to ensure that appropriate controls are developed and implemented for management planning, work execution, and quality assessment of the CIS organization's software activities. The CIS line organization places special QA emphasis on rigorous configuration control, change management, testing, and issue tracking to help achieve its quality goals.

  15. Fuel Cell Development Status | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development Status Fuel Cell Development Status Presented at the DOE-DOD Shipboard APU Workshop on March 29, 2011. PDF icon apu2011_7_short.pdf More Documents & Publications PAFC History and Successes MCFC and PAFC R&D Workshop Summary Report PAFC Cost Challenges

  16. Monthly Status Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Monthly Status Reports Monthly Status Reports Active Project Justification Statement Project Registration Number Assignments (Active) All Active DOE Technical Standards Document Project Registration Number Assignments (Completed) The Proposed Reaffirmations and Cancellations For Additional Information Contact: Jeffrey Feit phone: 301-903-0471 e-mail: jeffrey.feit@hq.doe.gov

  17. ESTSC - Find the latest in U.S. Department of Energy Software

    Office of Scientific and Technical Information (OSTI)

    Energy Science and Technology Software Center (ESTSC) is the centralized software management facility for the U.S. Department of Energy (DOE). A component of the Office of...

  18. Defect Prevention and Detection in Software for Automated Test Equipment

    SciTech Connect (OSTI)

    E. Bean

    2006-11-30

    Software for automated test equipment can be tedious and monotonous making it just as error-prone as other software. Active defect prevention and detection are also important for test applications. Incomplete or unclear requirements, a cryptic syntax used for some test applications—especially script-based test sets, variability in syntax or structure, and changing requirements are among the problems encountered in one tester. Such problems are common to all software but can be particularly problematic in test equipment software intended to test another product. Each of these issues increases the probability of error injection during test application development. This report describes a test application development tool designed to address these issues and others for a particular piece of test equipment. By addressing these problems in the development environment, the tool has powerful built-in defect prevention and detection capabilities. Regular expressions are widely used in the development tool as a means of formally defining test equipment requirements for the test application and verifying conformance to those requirements. A novel means of using regular expressions to perform range checking was developed. A reduction in rework and increased productivity are the results. These capabilities are described along with lessons learned and their applicability to other test equipment software. The test application development tool, or “application builder”, is known as the PT3800 AM Creation, Revision and Archiving Tool (PACRAT).

  19. Verification of operating software for cooperative monitoring applications

    SciTech Connect (OSTI)

    Tolk, K.M.; Rembold, R.K.

    1997-08-01

    Monitoring agencies often use computer based equipment to control instruments and to collect data at sites that are being monitored under international safeguards or other cooperative monitoring agreements. In order for this data to be used as an independent verification of data supplied by the host at the facility, the software used must be trusted by the monitoring agency. The monitoring party must be sure that the software has not be altered to give results that could lead to erroneous conclusions about nuclear materials inventories or other operating conditions at the site. The host might also want to verify that the software being used is the software that has been previously inspected in order to be assured that only data that is allowed under the agreement is being collected. A description of a method to provide this verification using keyed has functions and how the proposed method overcomes possible vulnerabilities in methods currently in use such as loading the software from trusted disks is presented. The use of public key data authentication for this purpose is also discussed.

  20. Development of output user interface software to support analysis

    SciTech Connect (OSTI)

    Wahanani, Nursinta Adi Natsir, Khairina Hartini, Entin

    2014-09-30

    Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this software 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.

  1. WILDFIRE IGNITION RESISTANCE ESTIMATOR WIZARD SOFTWARE DEVELOPMENT REPORT

    SciTech Connect (OSTI)

    Phillips, M.; Robinson, C.; Gupta, N.; Werth, D.

    2012-10-10

    This report describes the development of a software tool, entitled “WildFire Ignition Resistance Estimator Wizard” (WildFIRE Wizard, Version 2.10). This software was developed within the Wildfire Ignition Resistant Home Design (WIRHD) program, sponsored by the U. S. Department of Homeland Security, Science and Technology Directorate, Infrastructure Protection & Disaster Management Division. WildFIRE Wizard is a tool that enables homeowners to take preventive actions that will reduce their home’s vulnerability to wildfire ignition sources (i.e., embers, radiant heat, and direct flame impingement) well in advance of a wildfire event. This report describes the development of the software, its operation, its technical basis and calculations, and steps taken to verify its performance.

  2. Software and codes for analysis of concentrating solar power technologies.

    SciTech Connect (OSTI)

    Ho, Clifford Kuofei

    2008-12-01

    This report presents a review and evaluation of software and codes that have been used to support Sandia National Laboratories concentrating solar power (CSP) program. Additional software packages developed by other institutions and companies that can potentially improve Sandia's analysis capabilities in the CSP program are also evaluated. The software and codes are grouped according to specific CSP technologies: power tower systems, linear concentrator systems, and dish/engine systems. A description of each code is presented with regard to each specific CSP technology, along with details regarding availability, maintenance, and references. A summary of all the codes is then presented with recommendations regarding the use and retention of the codes. A description of probabilistic methods for uncertainty and sensitivity analyses of concentrating solar power technologies is also provided.

  3. RAVEN, a New Software for Dynamic Risk Analysis

    SciTech Connect (OSTI)

    Cristian Rabiti; Andrea Alfonsi; Joshua Cogliati; Diego Mandelli; Robert Kinoshita

    2014-06-01

    RAVEN is a generic software driver to perform parametric and probabilistic analysis of code simulating complex systems. Initially developed to provide dynamic risk analysis capabilities to the RELAP-7 code [1] is currently being generalized with the addition of Application Programming Interfaces (APIs). These interfaces are used to extend RAVEN capabilities to any software as long as all the parameters that need to be perturbed are accessible by inputs files or directly via python interfaces. RAVEN is capable to investigate the system response probing the input space using Monte Carlo, grid strategies, or Latin Hyper Cube schemes, but its strength is its focus toward system feature discovery like limit surfaces separating regions of the input space leading to system failure using dynamic supervised learning techniques. The paper will present an overview of the software capabilities and their implementation schemes followed by same application examples.

  4. Final Report. Center for Scalable Application Development Software

    SciTech Connect (OSTI)

    Mellor-Crummey, John

    2014-10-26

    The Center for Scalable Application Development Software (CScADS) was established as a part- nership between Rice University, Argonne National Laboratory, University of California Berkeley, University of Tennessee ā€“ Knoxville, and University of Wisconsin ā€“ Madison. CScADS pursued an integrated set of activities with the aim of increasing the productivity of DOE computational scientists by catalyzing the development of systems software, libraries, compilers, and tools for leadership computing platforms. Principal Center activities were workshops to engage the research community in the challenges of leadership computing, research and development of open-source software, and work with computational scientists to help them develop codes for leadership computing platforms. This final report summarizes CScADS activities at Rice University in these areas.

  5. EPICS: A control system software co-development success story

    SciTech Connect (OSTI)

    Knott, M.; Gurd, D.; Lewis, S.; Thuot, M.

    1993-11-01

    The Experimental Physics and Industrial Control Systems (EPICS) is the result of a software sharing and co-development effort of major importance now underway. The initial two participants, LANL and ANL, have now been joined by three other labs, and an earlier version of the software has been transferred to three commercial firms and is currently undergoing separate development. The reasons for EPICS`s success may be useful to enumerate and explain and the desire and prospects for its continued development are certainly worth examining.

  6. The SDAV Software Frameworks for Visualization and Analysis on

    Office of Scientific and Technical Information (OSTI)

    Next-Generation Multi-Core and Many-Core Architectures. (Conference) | SciTech Connect Conference: The SDAV Software Frameworks for Visualization and Analysis on Next-Generation Multi-Core and Many-Core Architectures. Citation Details In-Document Search Title: The SDAV Software Frameworks for Visualization and Analysis on Next-Generation Multi-Core and Many-Core Architectures. Authors: Moreland, Kenneth D. ; Sewell, Christopher ; Meredith, Jeremy ; Peterka, Tom ; DeMarle, David ; Lo, Li-Ta ;

  7. GE Software Expert Julian Keith Loren Discusses Innovation and the

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Internet | GE Global Research GE Software Expert Julian Keith Loren Discusses Innovation and the Industrial Internet Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE Software Expert Julian Keith Loren Discusses Innovation and the Industrial Internet Julian Keith Loren, a senior product manager at GE

  8. Vendors boot up a new generation of mining software

    SciTech Connect (OSTI)

    Carter, R.A.

    2008-10-15

    From complete mine management down to the smallest detail of process or machine design, the latest programs are claimed to process and display data easier, faster, and more accurately. MINExpo 2008 held in Las Vegas in September offered a bonanza of information on complete mine management to specilaized financial modules. Gemcom Software introduced new versions of five of its key products - Surpac 6.1, GEMS 6.2, Minex 5.3, MinerSched 6.0 and Whittle 4.2. Lerca Geosystems launched its Jigsaw 360 mine management suite, encompassing GPS navigation. Products launched by Modular Mining systems, Carlson Software, DEM Solutions and Logimine are also mentioned. 2 figs.

  9. EISA 432 Energy Audits Best Practices: Software Tools

    SciTech Connect (OSTI)

    Maryl Fisher

    2014-11-01

    Five whole building analysis software tools that can aid an energy manager with fulfilling energy audit and commissioning/retro-commissioning requirements were selected for review in this best practices study. A description of each software tool is provided as well as a discussion of the user interface and level of expertise required for each tool, a review of how to use the tool for analyzing energy conservation opportunities, the format and content of reports generated by the tool, and a discussion on the applicability of the tool for commissioning.

  10. Goal Practice & Experience : Status Quo and Future for Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Goal Practice & Experience : Status Quo and Future for Industrial Scale Biomass Energy Development in China Goal Practice & Experience : Status Quo and Future for Industrial Scale ...

  11. Focus Group Meeting (Activities Status) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Accomplishments Overview More Documents & Publications Focus Group Meeting (Activities Status) Focus Group Meeting (Topical Wrap-Up) Focus Group Meeting (Activities Status

  12. Training Work Group Status Overview - September 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training Work Group Status Overview - September 2012 Documents Available for Download PDF icon September 2012 Status Overviews More Documents & Publications Training Work Group ...

  13. Workforce Retention Work Group Status Overview - September 2012...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Group Status Overview - September 2012 Documents Available for Download PDF icon September 2012 Status Overviews More Documents & Publications Workforce Retention Work Group ...

  14. Current Status of the Spent Nuclear Fuel Management Program in...

    Office of Scientific and Technical Information (OSTI)

    Current Status of the Spent Nuclear Fuel Management Program in the United States. Citation Details In-Document Search Title: Current Status of the Spent Nuclear Fuel Management...

  15. Candidate and Special Status Species | Open Energy Information

    Open Energy Info (EERE)

    Status Species Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleCandidateandSpecialStatusSpecies&oldid612384" Feedback Contact needs...

  16. Category:BLM CaseStatus | Open Energy Information

    Open Energy Info (EERE)

    ENERGYGeothermal Home BLM Case Status Status of cases issued by the United States Bureau of Land Management (BLM) to organizations to utilize the land resources for geothermal...

  17. Status Report: Characterization of Weld Residual Stresses on...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Status Report: Characterization of Weld Residual Stresses on Full Diameter SNF Interim Storage Canister Mockup Status Report: Characterization of Weld Residual Stresses on Full ...

  18. The Status of Renewable Hydrogen and Energy Station Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Status of Renewable Hydrogen and Energy Station Technologies and Policy Recommendations The Status of Renewable Hydrogen and Energy Station Technologies and Policy ...

  19. Indonesia and Climate Change: Current Status and Policies | Open...

    Open Energy Info (EERE)

    Indonesia and Climate Change: Current Status and Policies Jump to: navigation, search Name Indonesia and Climate Change: Current Status and Policies AgencyCompany Organization...

  20. Thailand-Status and Potential for the Development of Biofuels...

    Open Energy Info (EERE)

    Status and Potential for the Development of Biofuels and Rural Renewable Energy Jump to: navigation, search Name Thailand-Status and Potential for the Development of Biofuels and...

  1. Fusion Nuclear Science and Technology Program - Status and plans...

    Office of Environmental Management (EM)

    Fusion Nuclear Science and Technology Program - Status and plans for tritium research ... May 05-07, 2015. PDF icon Fusion Nuclear Science and Technology Program - Status and plans ...

  2. Fusion Nuclear Science and Technology Program - Status and Plans...

    Office of Environmental Management (EM)

    Plans for Tritium Research Fusion Nuclear Science and Technology Program - Status and ... 23-25, 2014. PDF icon Fusion Nuclear Science and Technology Program - Status and Plans ...

  3. Reorganization Status of the Office of Energy Efficiency and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Status of the Office of Energy Efficiency and Renewable Energy: Panel Observations Reorganization Status of the Office of Energy Efficiency and Renewable Energy: Panel Observations ...

  4. Status and EAC Recommendations for Electricity Delivery Workforce...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Status and EAC Recommendations for Electricity Delivery Workforce (September 2014) Status and EAC Recommendations for Electricity Delivery Workforce (September 2014) This memo, ...

  5. Computer software design description for the integrated control and data acquisition system LDUA system

    SciTech Connect (OSTI)

    Aftanas, B.L.

    1998-08-12

    This Computer Software Design Description (CSDD) document provides the overview of the software design for all the software that is part of the integrated control and data acquisition system of the Light Duty Utility Arm System (LDUA). It describes the major software components and how they interface. It also references the documents that contain the detailed design description of the components.

  6. Status of the SLC (Stanford Linear Collider)

    SciTech Connect (OSTI)

    Coupal, D.P.

    1989-07-01

    This report presents a brief review of the status of the Stanford Linear Collider. Topics covered are: Beam luminosity, Detectors and backgrounds; and Future prospects. 3 refs., 8 figs., 1 tab. (LSP)

  7. Status of the MAJORANA DEMONSTRATOR experiment

    SciTech Connect (OSTI)

    Martin, R. D. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA, USA and Department of Physics, University of South Dakota, Vermillion, SD (United States); Abgrall, N.; Chan, Y-D.; Hegai, A.; Mertens, S.; Poon, A. W. P.; Vetter, K. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Aguayo, E.; Fast, J. E.; Hoppe, E. W.; Kouzes, R. T.; LaFerriere, B. D.; Orrell, J. L.; Overman, N. R.; Soin, A. [Pacific Northwest National Laboratory, Richland, WA (United States); Avignone III, F. T. [Department of Physics and Astronomy, University of South Carolina, Columbia, SC, USA and Oak Ridge National Laboratory, Oak Ridge, TN (United States); Barabash, A. S.; Konovalov, S. I.; Yumatov, V. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Bertrand, F. E. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); and others

    2014-06-24

    The MAJORANA DEMONSTRATOR neutrinoless double beta-decay experiment is currently under construction at the Sanford Underground Research Facility in South Dakota, USA. An overview and status of the experiment are given.

  8. Status of the MAJORANA DEMONSTRATOR experiment

    SciTech Connect (OSTI)

    Martin, R. D.; Abgrall, N.; Aguayo, Estanislao; Avignone, F. T.; Barabash, Alexander S.; Bertrand, F.; Boswell, M.; Brudanin, V.; Busch, Matthew; Caldwell, A. S.; Chan, Yuen-Dat; Christofferson, Cabot-Ann; Combs, Dustin C.; Detwiler, Jason A.; Doe, P. J.; Efremenko, Yuri; Egorov, Viatcheslav; Ejiri, H.; Elliott, S.; Esterline, James H.; Fast, James E.; Finnerty, P.; Fraenkle, Florian; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M.; Gruszko, J.; Guiseppe, Vincente; Gusev, K.; Hallin, A. L.; Hazama, R.; Hegai, A.; Henning, R.; Hoppe, Eric W.; Howard, Stanley; Howe, M. A.; Keeter, K.; Kidd, M. F.; Kochetov, Oleg; Konovalov, S.; Kouzes, Richard T.; LaFerriere, Brian D.; Leon, Jonathan D.; Leviner, L.; Loach, J. C.; MacMullin, J.; MacMullin, S.; Mertens, S.; Mizouni, Leila; Nomachi, Masaharu; Orrell, John L.; O'Shaughnessy, Mark D.; Overman, Nicole R.; Phillips, David; Poon, Alan; Pushkin, K.; Radford, D. C.; Rielage, Keith; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Schubert, Alexis G.; Shanks, B.; Shima, T.; Shirchenko, M.; Snavely, Kyle J.; Snyder, N.; Soin, Aleksandr; Suriano, Anne-Marie; Thompson, J.; Timkin, V.; Tornow, W.; Varner, R. L.; Vasilyev, Sergey; Vetter, Kai; Vorren, Kris R.; White, Brandon R.; Wilkerson, J. F.; Xu, W.; Yakushev, E.; Young, A.; Yu, Chang-Hong; Yumatov, Vladimir

    2014-07-08

    The MAJORANA DEMONSTRATOR neutrinoless double beta-decay experiment is currently under construction at the Sanford Underground Research Facility in South Dakota, USA. An overview and status of the experiment are given.

  9. National Hydrogen Learning Demonstration Status (Presentation)

    SciTech Connect (OSTI)

    Wipke, K.; Sprik, S.; Kurtz, J.; Ramsden, T.; Ainscough, C.; Saur, G.

    2012-02-01

    This presentation discusses U.S. DOE Learning Demonstration Project goals, fuel cell vehicle and H2 station deployment status, and technical highlights of vehicle and infrastructure analysis results and progress.

  10. Generalized parton distributions: Status and perspectives (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Generalized parton distributions: Status and perspectives Citation Details In-Document Search Title: Generalized parton distributions: Status and perspectives We summarize recent developments in understanding the concept of generalized parton distributions (GPDs), its relation to nucleon structure, and its application to high-Q^2 electroproduction processes. Following a brief review of QCD factorization and transverse nucleon structure, we discuss (a) new theoretical methods

  11. ARM - Value-Added Product Status Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status Reports Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product Status Reports ARM Climate Research Facility Quarterly Value-Added Product Report July 1-September 30, 2015 (PDF, 1MB) ARM Climate Research Facility Quarterly

  12. ARM - Value-Added Products - Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Status Report Expand Orange | Expand Blue | Expand Green | Collapse All See Legend for Data Availability explanation. ARM - Value-Added Products - Status Last Update: March 21 2016 19:00:50 +/- Vap Name Translator Developer Frequency Tier Producer Data Availability ACRED (ARM Cloud Retrieval Ensemble Data) Shaocheng Xie Chuanfeng Zhao, Renata Mc Coy Periodically Evaluation Developer ARM Overview: Developer Description: The ARM Cloud Retrieval Ensemble Dataset (ACRED) is a multi-year cloud

  13. Status of Laboratory Goals | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status of Laboratory Goals Status of Calendar Year 2016 objectives and targets. Item 1 Recommendation: The EMSSC recommends an Open House be held in the Ames Laboratory Storeroom and Warehouse by April 1, 2016. The Open House will provide Ames Laboratory employees the opportunity to discover what supplies are readily available through the storeroom and showcase the Equipment Pool website. This recommendation will increase awareness of the sustainable purchasing requirements by showcasing these

  14. ILDG Middleware Working Group Status Report

    SciTech Connect (OSTI)

    B. Joo; W. Watson

    2004-09-01

    We report on the status of the ILDG Middleware Working Group. The Middleware Working Group was formed with the aim of designing standard middleware to allow the interoperation of the data grids of ILDG member collaborations. Details of the working group are given. In this contribution we outline the role of middleware in the ILDG, present our proposed middleware architecture and discuss our current status and future work within the working group.

  15. TMACS test procedure TP012: Panalarm software bridge

    SciTech Connect (OSTI)

    Washburn, S.J.

    1994-08-25

    This Test Procedure addresses the testing of the functionality of the Tank Monitor and Control System (TMACS) Panalarm bridge software. The features to be tested are: Bridge Initialization Options; Bridge Communication; Bridge Performance; Testing Checksum Errors; and Testing Command Reject Errors. Only the first three could be tested; the last two have been deferred to a later date.

  16. Software Requirements Specification Verifiable Fuel Cycle Simulation (VISION) Model

    SciTech Connect (OSTI)

    D. E. Shropshire; W. H. West

    2005-11-01

    The purpose of this Software Requirements Specification (SRS) is to define the top-level requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). This simulation model is intended to serve a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies.

  17. Recent improvements to software used for optimization of SRF linacs

    SciTech Connect (OSTI)

    Powers, Tom J.

    2014-12-01

    This work describes a software tool that allows one to vary parameters and understand the effects on the optimized costs of construction plus 10 year operations of an SRF linac, where operation costs includes the cost of the electrical utilities but not the labor or other costs. The program includes estimates for the associated cryogenic facility, and controls hardware. The software interface provides the ability to vary the cost of the different aspects of the machine as well as to change the cryomodule and cavity types. Additionally, this work will describe the recent improvements to the software that allow one to estimate the costs of energy-recovery based linacs and to enter arbitrary values of the low field Q0 and Q0 slope. The initial goal when developing the software was to convert a spreadsheet format to a graphical interface and to allow the ability to sweep different parameter sets. The tools also allow one to compare the cost of the different facets of the machine design and operations so as to better understand tradeoffs. An example of how it was used to independently investigate cost optimization tradeoffs for the LCLS-II linac will also be presented.

  18. Managing Scientific Software Complexity with Bocca and CCA

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Allan, Benjamin A.; Norris, Boyana; Elwasif, Wael R.; Armstrong, Robert C.

    2008-01-01

    In high-performance scientific software development, the emphasis is often on short time to first solution. Even when the development of new components mostly reuses existing components or libraries and only small amounts of new code must be created, dealing with the component glue code and software build processes to obtain complete applications is still tedious and error-prone. Component-based software meant to reduce complexity at the application level increases complexity to the extent that the user must learn and remember the interfaces and conventions of the component model itself. To address these needs, we introduce Bocca, the first tool to enablemoreĀ Ā» application developers to perform rapid component prototyping while maintaining robust software-engineering practices suitable to HPC environments. Bocca provides project management and a comprehensive build environment for creating and managing applications composed of Common Component Architecture components. Of critical importance for high-performance computing (HPC) applications, Bocca is designed to operate in a language-agnostic way, simultaneously handling components written in any of the languages commonly used in scientific applications: C, C++, Fortran, Python and Java. Bocca automates the tasks related to the component glue code, freeing the user to focus on the scientific aspects of the application. Bocca embraces the philosophy pioneered by Ruby on Rails for web applications: start with something that works, and evolve it to the user's purpose.Ā«Ā less

  19. Managing scientific software complexity with Bocca and CCA

    SciTech Connect (OSTI)

    Benjamin, Allan A.; Norris, Boyana; Elwasif, Wael R; Armstrong, Robert C.

    2008-01-01

    In high-performance scientific software development, the emphasis is often on short time to first solution. Even when the development of new components mostly reuses existing components or libraries and only small amounts of new code must be created, dealing with the component glue code and software build processes to obtain complete applications is still tedious and error-prone. Component-based software meant to reduce complexity at the application level increases complexity to the extent that the user must learn and remember the interfaces and conventions of the component model itself. To address these needs, we introduce Bocca, the first tool to enable application developers to perform rapid component prototyping while maintaining robust software-engineering practices suitable to HPC environments. Bocca provides project management and a comprehensive build environment for creating and managing applications composed of Common Component Architecture components. Of critical importance for high-performance computing (HPC) applications, Bocca is designed to operate in a language-agnostic way, simultaneously handling components written in any of the languages commonly used in scientific applications: C, C++, Fortran, Python and Java. Bocca automates the tasks related to the component glue code, freeing the user to focus on the scientific aspects of the application. Bocca embraces the philosophy pioneered by Ruby on Rails for web applications: start with something that works, and evolve it to the user's purpose.

  20. GenePRIMP: A software quality control tool

    SciTech Connect (OSTI)

    Amrita Pati

    2010-05-05

    Amrita Pati of the DOE Joint Genome Institute's Genome Biology group describes the software tool GenePRIMP and how it fits into the quality control pipeline for microbial genomics. Further details regarding GenePRIMP appear in a paper published online May 2, 2010 in Nature Methods.

  1. Technical evaluation of software for gamma-ray logging system

    SciTech Connect (OSTI)

    Stromswold, D.C.

    1994-05-01

    This report contains results of a technical review of software, identified as LGCALC, that processes data collected by a high-resolution gamma-ray borehole logging system. The software presently operates within Westinghouse Hanford Company, Department of Geosciences, to process data collected by the Radionuclide Logging System. The software has been reviewed for its suitability for processing data to be collected by new high-resolution gamma-ray logging trucks scheduled to begin operational tests within Westinghouse Tank Waste Remediation Systems during 1994. Examination of the program code and hands-on operational tests have shown that this software is suitable for its intended use of processing high-resolution gamma-ray data obtained from borehole logging. Most of the code requires no changes, but in a few limited cases, suggestions have been made to correct errors or improve operation. Section 4 describes these changes. The technical review has confirmed the appropriateness, correctness, completeness, and coding accuracy of algorithms used to process spectral gamma-ray data, leading to a calculation of subsurface radionuclide contaminants. Running the program with test data from calibration models has confirmed that the program operates correctly. Comparisons with hand calculations have shown the correctness of the output from the program, based on known input data. Section 3 describes these tests. The recommended action is to make the near term programming changes suggested in Section 4.1 and then use the LGCALC analysis program with the new high-resolution logging systems once they have been properly calibrated.

  2. Safety Software Quality Assurance Functional Area Qualification Standard

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-10

    This SSQA FAQS identifies the minimum technical competency requirements for DOE personnel who have a responsibility for safety software. Although there may be other competency requirements associated with the positions held by DOE personnel, this technical FAQS is limited to identifying the specific technical competencies required throughout all defense nuclear facilities

  3. Software for the occupational health and safety integrated management system

    SciTech Connect (OSTI)

    Vătăsescu, Mihaela

    2015-03-10

    This paper intends to present the design and the production of a software for the Occupational Health and Safety Integrated Management System with the view to a rapid drawing up of the system documents in the field of occupational health and safety.

  4. GenePRIMP: A software quality control tool

    ScienceCinema (OSTI)

    Amrita Pati

    2010-09-01

    Amrita Pati of the DOE Joint Genome Institute's Genome Biology group describes the software tool GenePRIMP and how it fits into the quality control pipeline for microbial genomics. Further details regarding GenePRIMP appear in a paper published online May 2, 2010 in Nature Methods.

  5. NREL Software Models Performance of Wind Plants (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2015-01-01

    This NREL Highlight is being developed for the 2015 February Alliance S&T Meeting, and describes NREL's Simulator for Offshore Wind Farm Applications (SOWFA) software in collaboration with Norway-based Statoil, to optimize layouts and controls of wind plants arrays.

  6. Westinghouse Waste Simulation and Optimization Software Tool - 13493

    SciTech Connect (OSTI)

    Mennicken, Kim [Westinghouse Electric Germany GmbH, Global Waste Management, Dudenstrasse 44, D-68167 Mannheim (Germany)] [Westinghouse Electric Germany GmbH, Global Waste Management, Dudenstrasse 44, D-68167 Mannheim (Germany); Aign, Joerg [Westinghouse Electric Germany GmbH, Global Waste Management, Tarpenring 6, D-22419 Hamburg (Germany)] [Westinghouse Electric Germany GmbH, Global Waste Management, Tarpenring 6, D-22419 Hamburg (Germany)

    2013-07-01

    Radioactive waste is produced during NPP operation and NPP D and D. Different kinds of waste with different volumes and properties have to be treated. Finding a technically and commercially optimized waste treatment concept is a difficult and time consuming process. The Westinghouse waste simulation and optimization software tool is an approach to study the total life cycle cost of any waste management facility. The tool enables the user of the simulation and optimization software to plan processes and storage buildings and to identify bottlenecks in the overall waste management design before starting detailed planning activities. Furthermore, application of the software enables the user to optimize the number of treatment systems, to determine the minimum design capacity for onsite storage facilities, to identify bottlenecks in the overall design and to identify the most cost-effective treatment paths by maintaining optimal waste treatment technologies. In combination with proven waste treatment equipment and integrated waste management solutions, the waste simulation and optimization software provides reliable qualitative results that lead to an effective planning and minimization of the total project planning risk of any waste management activity. (authors)

  7. Status and EAC Recommendations for Electricity Delivery Workforce (September 2014)

    Broader source: Energy.gov [DOE]

    Status and recommendations presented at the September 2014 meeting for Electricity Delivery Workforce (September 2014)

  8. Open Source Scanning Probe Microscopy Control Software package GXSM

    SciTech Connect (OSTI)

    Zahl, P.; Wagner, T.; Moller, R.; Klust, A.

    2010-05-01

    GXSM is a full featured and modern scanning probe microscopy (SPM) software. It can be used for powerful multidimensional image/data processing, analysis, and visualization. Connected to an instrument, it is operating many different flavors of SPM, e.g., scanning tunneling microscopy and atomic force microscopy or, in general, two-dimensional multichannel data acquisition instruments. The GXSM core can handle different data types, e.g., integer and floating point numbers. An easily extendable plug-in architecture provides many image analysis and manipulation functions. A digital signal processor subsystem runs the feedback loop, generates the scanning signals, and acquires the data during SPM measurements. The programmable GXSM vector probe engine performs virtually any thinkable spectroscopy and manipulation task, such as scanning tunneling spectroscopy or tip formation. The GXSM software is released under the GNU general public license and can be obtained via the internet.

  9. Assurance and assessment techniques for nuclear weapon related software

    SciTech Connect (OSTI)

    Blackledge, M.A.

    1993-07-01

    Sandia National Laboratories has the qualification evaluation responsibility for the design of certain components intended for use in nuclear weapons. Specific techniques in assurance and assessment have been developed to provide the quality evidence that the software has been properly qualified for use. Qualification Evaluation is a process for assessing the suitability of either a process used to develop or manufacture the product, or the product itself. The qualification process uses a team approach to evaluating a product or process, chaired by a Quality Assurance professional, with other members representing the design organization, the systems organization, and the production agency. Suitable for use implies that adequate and appropriate definition and documentation has been produced and formally released, adequate verification and validation activities have taken place to ensure proper operation, and the software product meets all requirements, explicitly or otherwise.

  10. Assurance and assessment techniques for nuclear weapon related software

    SciTech Connect (OSTI)

    Blackledge, M.A.

    1993-12-31

    Sandia National Laboratories has the qualification evaluation responsibility for the design of certain components intended for use in nuclear weapons. Specific techniques in assurance and assessment have been developed to provide the quality evidence that the software has been properly qualified for use. Qualification Evaluation is a process for assessing the suitability of either a process used to develop or manufacture the product, or the product itself The qualification process uses a team approach to evaluating a product or process, chaired by a Quality Assurance professional, with other members representing the design organization, the systems organization, and the production agency. Suitable for use implies that adequate and appropriate definition and documentation has been produced and formally released, adequate verification and validation activities have taken place to ensure proper operation, and the software product meets all requirements, explicitly or otherwise.

  11. Assurance and assessment techniques for nuclear weapon related software

    SciTech Connect (OSTI)

    Blackledge, M.A.

    1993-01-01

    Sandia National Laboratories has the qualification evaluation responsibility for the design of certain components intended for use in nuclear weapons. Specific techniques in assurance and assessment have been developed to provide the quality evidence that the software has been properly qualified for use. Qualification Evaluation is a process for assessing the suitability of either a process used to develop or manufacture the product, or the product itself. The qualification process uses a team approach to evaluating a product or process, chaired by a Quality Assurance professional, with other members representing the design organization, the systems organization, and the production agency. Suitable for use implies that adequate and appropriate definition and documentation has been produced and formally released, adequate verification and validation activities have taken place to ensure proper operation, and the software product meets all requirements, explicitly or otherwise.

  12. Solder Interconnect Predictor (SIP) Software v. 0.5

    Energy Science and Technology Software Center (OSTI)

    2008-11-19

    This software tool was developed for predicting the fatigue damage in a wide variety of 63Sn-37Pb solder joints used in electronics applications. This tool is based upon the unified creep plasticity damage model CompSIR developed at Sandia National Laboratories. The software can be used as a design tool for predicting the long term reliability of consumer, military and space electronics. Both service as well as accelerated testing environments can be addressed by the user. ThemoreĀ Ā» mesh generating function provides the user with the greater versatility to explore different package and I/O configurations. For example, different solder joint geometries can be investigated to determine the effects of workmanship quality on reliability. Graphical user interfaces provide the user with easy data input screens as well as results profiles.Ā«Ā less

  13. Center for Technology for Advanced Scientific Component Software (TASCS)

    SciTech Connect (OSTI)

    Damevski, Kostadin

    2009-03-30

    A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

  14. Solid Waste Information and Tracking System (SWITS) Software Requirements Specification

    SciTech Connect (OSTI)

    MAY, D.L.

    2000-03-22

    This document is the primary document establishing requirements for the Solid Waste Information and Tracking System (SWITS) as it is converted to a client-server architecture. The purpose is to provide the customer and the performing organizations with the requirements for the SWITS in the new environment. This Software Requirement Specification (SRS) describes the system requirements for the SWITS Project, and follows the PHMC Engineering Requirements, HNF-PRO-1819, and Computer Software Qualify Assurance Requirements, HNF-PRO-309, policies. This SRS includes sections on general description, specific requirements, references, appendices, and index. The SWITS system defined in this document stores information about the solid waste inventory on the Hanford site. Waste is tracked as it is generated, analyzed, shipped, stored, and treated. In addition to inventory reports a number of reports for regulatory agencies are produced.

  15. Representation of Limited Rights Data and Restricted Computer Software

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 2005 Applicant Name___________________________________ Announcement Number______________________________ Representation of Limited Rights Data and Restricted Computer Software (a) Any data delivered under an award resulting from this announcement is subject to the Rights in Data - General or the Rights in Data - Programs Covered Under Special Data Statutes clause (See Intellectual Property Provisions at http://www.gc.energy.gov/financial_assistance_awards.htm). Under these clauses, the

  16. NSTX-U Digital Coil Protection System Software Detailed Design

    SciTech Connect (OSTI)

    2014-06-01

    The National Spherical Torus Experiment (NSTX) currently uses a collection of analog signal processing solutions for coil protection. Part of the NSTX Upgrade (NSTX-U) entails replacing these analog systems with a software solution running on a conventional computing platform. The new Digital Coil Protection System (DCPS) will replace the old systems entirely, while also providing an extensible framework that allows adding new functionality as desired.

  17. Pulse Analysis Spectroradiometer System (PASS) Software - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Energy Analysis Energy Analysis Find More Like This Return to Search Pulse Analysis Spectroradiometer System (PASS) Software National Renewable Energy Laboratory Contact NREL About This Technology Publications: PDF Document Publication Pulse Analysis Spectroradiometer System for Measuring the Spectral Distribution of Flash Solar Simulators http://www.nrel.gov/docs/fy08osti/43652.pdf (576 KB) Technology Marketing SummaryFlashing artificial light sources are used extensively in

  18. Renewable Energy Load Matching Software - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wind Energy Wind Energy Solar Photovoltaic Solar Photovoltaic Energy Analysis Energy Analysis Find More Like This Return to Search Renewable Energy Load Matching Software National Renewable Energy Laboratory Contact NREL About This Technology Publications: PDF Document Publication RELM Publication (561 KB) Technology Marketing Summary The most common way of describing the quality of an existing or potential wind or solar power generation site is the total amount of energy expected to be

  19. Software for a Multi-beam Optical Stress Sensor

    Energy Science and Technology Software Center (OSTI)

    2000-04-19

    This software program tracks multiple laser beam spots reflected from a substrate which is changing its shape in response to changes in environment or changes in its physical state. The geometry of the laser, substrate, camera, and substrate parameters result in a final measurement of the stress-thickness product that would bend the substrate to its final curvature. A typical example is thin film growth.

  20. FirstOPTIC Software Package for Parabolic Trough Evaluation - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal Find More Like This Return to Search FirstOPTIC Software Package for Parabolic Trough Evaluation National Renewable Energy Laboratory Contact NREL About This Technology Publications: PDF Document Publication ASME Article (900 KB) Technology Marketing Summary Parabolic trough collectors are one of the main concentrating solar power (CSP) technologies used in commercial utility-scale power generation plants. A key param-eter for trough performance evaluation is the collector