Powered by Deep Web Technologies
Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Solar energy industry survey  

SciTech Connect

This report describes the results of a survey of companies in the solar energy industry. The general objective of the survey was to provide information to help evaluate the effectiveness of technology transfer mechanisms for the development of the solar industry. The specific objectives of the survey included: (1) determination of the needs of the solar industry; (2) identification of special concerns of the solar industry; and (3) determination of the types of technology transfer mechanisms that would be most helpful to the solar industry in addressing these needs and concerns. The major focus was on technical problems and developments, but institutional and marketing considerations were also treated. The majority of the sample was devoted to the solar heating and cooling (SHAC) component of the industry. However, a small number of photovoltaic (PV), wind, and power generation system manufacturers were also surveyed. Part I discusses the methodology used in the selection, performance, and data reduction stages of the survey, comments on the nature of the responses, and describes the conclusions drawn from the survey. The latter include both general conclusions concerning the entire solar industry, and specific conclusions concerning component groups, such as manufacturers, architects, installers, or dealers. Part II consists of tabulated responses and non-attributed verbatim comments that summarize and illustrate the survey results.

1979-08-06T23:59:59.000Z

2

Customer Feedback during Development of 1998 MECS: Mail/Electronic Survey  

U.S. Energy Information Administration (EIA) Indexed Site

1998 MECS User Needs 1998 MECS User Needs Mail/Electronic Survey Results A mail/electronic survey was conducted as part of the process to collect information on the data needs of MECS customers. The collection time frame was May 1 through July 31, 1998. The survey portion has been completed, and the total results are now available. During this three-month period, the electronic user-needs survey received about 207 hits. Yet, only 15 of those hits resulted in the transmission of a completed survey. Exactly 239 surveys were mailed to customers on the mailing list of the MECS publication. A total of 50 completed surveys (21% response rate) were returned, 32 of which resulted from a follow-up mail request. Only two surveys were returned by the 11 trade associations that were identified as MECS users. Where appropriate, the replies of those two TRADE

3

Industry Survey of Radioactive Material Control Practices  

Science Conference Proceedings (OSTI)

Workers and materials entering and exiting the radiation control areas (RCAs) of nuclear power plants are carefully monitored for radioactivity. This report documents a survey developed to evaluate the range of instrumentation and practices used by the industry for performing such measurements.

2003-11-26T23:59:59.000Z

4

Geothermal industry employment: Survey results & analysis  

DOE Green Energy (OSTI)

The Geothermal Energy Association (GEA) is ofteh asked about the socioeconomic and employment impact of the industry. Since available literature dealing with employment involved in the geothermal sector appeared relatively outdated, unduly focused on certain activities of the industry (e.g. operation and maintenance of geothermal power plants) or poorly reliable, GEA, in consultation with the DOE, decided to conduct a new employment survey to provide better answers to these questions. The main objective of this survey is to assess and characterize the current workforce involved in geothermal activities in the US. Several initiatives have therefore been undertaken to reach as many organizations involved in geothermal activities as possible and assess their current workforce. The first section of this document describes the methodology used to contact the companies involved in the geothermal sector. The second section presents the survey results and analyzes them. This analysis includes two major parts. The first part analyzes the survey responses, presents employment numbers that were captured and describes the major characteristics of the industry that have been identified. The second part of the analysis estimates the number of workers involved in companies that are active in the geothermal business but did not respond to the survey or could not be reached. Preliminary conclusions and the study limits and restrictions are then presented. The third section addresses the potential employment impact related to manufacturing and construction of new geothermal power facilities. Indirect and induced economic impacts related with such investment are also investigated.

Not Available

2005-09-01T23:59:59.000Z

5

Mailing Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Mailing Services Mailing Services Use the form below to add your name to the Depleted UF6 Mailing List. First Name: Last Name: Organization: Address: City: State: Postal Code:...

6

Summary of Industry Surveys on Future Capacity Commitments  

U.S. Energy Information Administration (EIA)

Energy Information Administration Natural Gas 1996: Issues and Trends 141 Appendix C Summary of Industry Surveys on Future Capacity Commitments Table C1.

7

Metered Mail Form International Mail Only  

E-Print Network (OSTI)

Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

Palmeri, Thomas

8

LASER Welding Survey for Power Generation Industry  

Science Conference Proceedings (OSTI)

EPRI has developed technology for laser weld repair of steam generator tubes in light water reactors. This technology has promise for other specialized welding and heat treatment applications in the power generation industry.

1998-04-23T23:59:59.000Z

9

Survey paper: A survey on industrial applications of fuzzy control  

Science Conference Proceedings (OSTI)

Fuzzy control has long been applied to industry with several important theoretical results and successful results. Originally introduced as model-free control design approach, model-based fuzzy control has gained widespread significance in the past decade. ... Keywords: Adaptive fuzzy control, Mamdani fuzzy controllers, Predictive control, Stable design, Takagi-Sugeno fuzzy controllers

Radu-Emil Precup; Hans Hellendoorn

2011-04-01T23:59:59.000Z

10

Tobias Maile  

NLE Websites -- All DOE Office Websites (Extended Search)

Tobias Maile Tobias Maile 1 Cyclotron Road MS 90R3111 Berkeley CA 94720 (510) 486-5961 TMaile@lbl.gov This publications database is an ongoing project, and not all Division publications are represented here yet. Publications 2013 O'Donnell, James, Tobias Maile, Cody Rose, Natasa Mrazovic, Elmer Morrissey, Cynthia Regnier, Kristen Parrish, and Vladimir Bazjanac. Transforming BIM to BEM: Generation of Building Geometry for the NASA Ames Sustainability Base BIM., 2013. Download: PDF (2.98 MB) 2012 Maile, Tobias, Mangesh Basarkar, James O'Donnell, Philip Haves, and Kevin Settlemyer. "Mapping Hvac Systems for Simulation In EnergyPlus." In SimBuild 2012 IBPSA Conference. Madison, WI, USA, 2012. Download: PDF (1.24 MB) 2011 Maile, Tobias, Vladimir Bazjanac, James O'Donnell, and Matthew Garr. "A

11

Industry  

E-Print Network (OSTI)

oxide emission reductions in industry in the EU. Europeanissues: Annual survey of industries. Central StatisticalDesiccated coconut industry of Sri- Lankas opportunities

Bernstein, Lenny

2008-01-01T23:59:59.000Z

12

Manufacturing-Industrial Energy Consumption Survey(MECS) Historical  

U.S. Energy Information Administration (EIA) Indexed Site

> Historical Publications > Historical Publications Manufacturing Establishments reports, data tables and questionnaires Released: May 2008 The Manufacturing Energy Consumption Survey (MECS) is a periodic national sample survey devoted to measuring energy consumption and related issues in the manufacturing sector. The MECS collects data on energy consumption, purchases and expenditures, and related issues and behaviors. Links to previously published documents are given below. Beginning in 1998, reports were only issued electronically. Additional electronic releases are available on the MECS Homepage. The basic unit of data collection for this survey is the manufacturing establishment. Industries are selected according to definitions found in the North American Industry Classification System (NAICS), which replace the earlier Standard Industrial Classification (SIC) system.

13

Metered Mail Form Domestic Mail Only  

E-Print Network (OSTI)

Metered Mail Form Domestic Mail Only For USPS Mail Only Charge to Department First Class Mail Media Meter Form. · All outgoing USPS Mail that needs postage should be kept separate from all other mail already be sealed prior to being metered. Failure to properly seal this type of mail could result

Palmeri, Thomas

14

A Survey of the U.S. Energy ServiceA Survey of the U.S. Energy Service Company (ESCO) Industry: MarketCompany (ESCO) Industry: MarketCompany (ESCO) Industry: MarketCompany (ESCO) Industry: Market  

E-Print Network (OSTI)

A Survey of the U.S. Energy ServiceA Survey of the U.S. Energy Service Company (ESCO) Industry and savings 33 #12;Estimated Size of U.S. ESCO IndustryEstimated Size of U.S. ESCO Industry Energy AnalysisGrowth Projections for U.S. ESCO Industry Energy Analysis Department Electricity Markets and Policy Group 55 #12

15

Via Mail:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2009 1, 2009 Via email: GC-62@hq.doe.gov Via Mail: Office of the Assistant General Counsel for Technology Transfer and Intellectual Property U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 ATTN: TECHNOLOGY TRANSFER QUESTIONS Dear Sir or Madam: This letter is in response to the Notice of Inquiry: Technology Transfer Practices at Department of Energy ("DOE") Laboratories. (Federal Register Vol. 73, No. 229, p. 72036). The following comments are respectfully submitted on behalf of Eastman Chemical Company ("Eastman"). Eastman is a global FORTUNE 500 company with 2007 sales of $6.8 billion and approximately

16

RADIATION: A TOOL FOR INDUSTRY. A Survey of Current Technology  

SciTech Connect

This one-year survey of industrial applications of ionizing radiation is based on interviews with workers in the field and on analysis of selected literature. ionizing radiation at kilowatt power levels from electron accelerators and from radionuclides is finding a few special applications, notably sterilization and be in various stages of process development and tcsting. These are concentrated heavily in the plastics field, though examples are found in petrochemical synthesis, product sterilization, and portable energy sources such as batteries. Ionizing radiation is not yet a processing tool of major importance to industry generally, however, because it has not yet demonstrated sufficient advantages over established methods of achieving a similar result. Thus, though ionizing radiation produces free radicals under a wide variety of conditions, it has, with few exceptions, not proved superior to other agents, such as heat and chemicals, that also produce free radicals. Insufficient specificity of action, low yields, and costs higher than those of competitive processes are among the chief difficulties found. Possible unique features of radiation have not been fully explored. Optimization of enviromental variables has not been thoroughly studied. Indirect advantages associated with radiation, such as greater processing or packaging flexibility, have already proved significantly important but have not yet been thoroughly evaluated in most potential applications. Even radiation engineering is relatively undeveloped and radiation economics uncertain. Skillfully oriented research and development on such problems will improve the likelihood of radiation becoming a tool of major importance for U.S. industry. (auth)

1959-01-01T23:59:59.000Z

17

Survey and analyze the business conditions of the solar industry, June-July 1981. Task I  

DOE Green Energy (OSTI)

Progress is reported on the following tasks: surveying and analyzing the business conditions of the solar industry, administrative analysis of solar system product certification standards and codes, and solar industry advertising guidelines. (MHR)

Not Available

1981-01-01T23:59:59.000Z

18

Member Survey of Industry Issues for Hardware and Conductors  

Science Conference Proceedings (OSTI)

This report presents the results of a survey to obtain information on atmospheric corrosion issues associated with overhead transmission line hardware and conductors exposed to the environment. Atmospheric corrosion is a natural and unavoidable phenomenon that can lead to the premature failure of conductors, shield wires, hardware or components and result in momentary or even sustained outages. Survey results will help support research and development activities to extend the capabilities of ...

2012-12-12T23:59:59.000Z

19

Source category survey: mineral wool manufacturing industry. Final report  

SciTech Connect

This report contains background information which was used for determining the need for new source performance standards (NSPS) for the mineral wool manufacturing industry in accordance with Section 111 of the Clean Air Act. Air pollution emissions and growth trends of the mineral wool industry are examined. Manufacturing processes, control strategies, and state and local air pollution regulations are discussed. The impact of a potential NSPS on particulate and carbon monoxide emissions is calculated.

Not Available

1980-06-01T23:59:59.000Z

20

Member Survey on Steel Crossarms: Industry Issues Regarding Degradation, Inspection, Life Assessment and Mitigation  

Science Conference Proceedings (OSTI)

This report presents the results of a survey to obtain information on industry issues related to steel crossarm degradation and failures, and utility practices regarding inspection, life assessment, and mitigation. Survey results will help improve understanding of crossarm issues to be addressed, and provide guidance for further research on degradation modes, inspection technologies, and mitigation techniques.A web-based survey tool was used to construct a set of focused questions to ...

2012-12-12T23:59:59.000Z

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Review: Industrial aspects and literature survey: Fleet composition and routing  

Science Conference Proceedings (OSTI)

The purpose of this paper is to describe industrial aspects of combined fleet composition and routing in maritime and road-based transportation, and to present the current status of research in the form of a comprehensive literature review. First, presents ... Keywords: Fleet composition, Fleet dimensioning, Fleet size and mix, Maritime transportation, Road-based transportation, Vehicle routing

Arild Hoff; Henrik Andersson; Marielle Christiansen; Geir Hasle; Arne Lkketangen

2010-12-01T23:59:59.000Z

22

Workforce Development: A Survey of Industry Needs and Training Approaches  

DOE Green Energy (OSTI)

This paper presents information and data collected during 2008 on PV workforce needs by the Interstate Renewable Energy Council for the U.S. Department of Energy. The data was collected from licensed contractors, PV practitioners, educators and expert instructors at training sessions, and at focus group and advisory committee meetings. Respondents were primarily from three states: Florida, New York and California. Other states were represented, but to a lesser extent. For data collection, a 12-item questionnaire was developed that addressed key workforce development issues from the perspectives of both the PV industry and training institutions. A total of 63 responses were collected, although not every respondent answered every question. Industry representatives slightly outnumbered the educators, although the difference in responses was not significant.

Ventre, Jerry; Weissman, Jane

2009-04-01T23:59:59.000Z

23

TMS: Mailing List Rentals  

Science Conference Proceedings (OSTI)

List your company in the TMS directory [MORE] ... Through utilizing a TMS mailing list, your organization can reach over 10,000 professionals within the minerals...

24

Wellbore thermal simulation for geothermal wells. Survey of existing capability and industry needs and interest  

DOE Green Energy (OSTI)

Four operating companies and five service companies in the petroleum and geothermal industry were contacted (1) to determine needs for wellbore temperature predictions during operations and (2) to evaluate interest in use of a wellbore thermal simulator (computer program) if developed by ERDA. As a basis for contacting industry, a literature survey was undertaken to assess the state-of-the-art and availability of wellbore thermal simulation capability. The literature review is summarized in the four tables of Appendix 1. Written abstracts of the individual articles is given in Appendix 2. The feedback from industry is presented in Appendix 3 in the form of completed questionaires.

Goodman, M.A.

1977-06-01T23:59:59.000Z

25

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report  

Science Conference Proceedings (OSTI)

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01T23:59:59.000Z

26

Survey of government assistance for the world's hard-coal industries  

Science Conference Proceedings (OSTI)

This report investigates the existence and use of subsidies and incentives that foreign nations give their coal industries. Of particular interest are those aids that promote and facilitate the export of coal. A survey of hard coal producing countries was conducted to compile, and quantify if possible, direct and indirect financial aids given by governments for the purposes of maintaining, expanding or creating an indigenous coal industry and facilitating exports. The survey found that government measures commonly used to maintain, expand or create coal production include deficit operating grants, capital grants, preferential loan credits, labor and tax benefits, and export marketing assistance. Typical measures used to guarantee and protect domestic coal markets are long-term supply agreements, price supports, government purchases, tariffs, import licenses, and quotas. Common types of financial assistance provided by governments that do not benefit current coal production or use are research and development funds, environmental grants for restoring past mined lands, and payments to unemployed miners.

Neme, L.A.; Yancik, J.J.

1989-05-01T23:59:59.000Z

27

A Survey of LTR Program Industry Partner Satisfaction at Oak Ridge National Lab  

SciTech Connect

As a US Department of Energy (DOE) Office of Science (SC) National Laboratory, the Oak Ridge National Lab (ORNL) participates in the Laboratory Technology Research (LTR) Program. The mission of the LTR Program is to advance science and technology, in support of DOE missions, toward innovative applications through cost-shared partnerships with the private sector. The benefits to industry participants include gaining access to world-class researchers and facilities, while the benefits to the ORNL researchers includes leveraging the declining government-provided funds. Thus, the importance placed upon industry partner satisfaction is large, especially if the LTR Program is to be sustained during episodes of government budget constraints. Realizing the critical nature of partner satisfaction, in 1998 the DOE-SC National Laboratories surveyed industrial partners to assess their satisfaction with the cooperative research projects in which they were involved. This paper will describe the survey methodology including development of the questionnaire and a summary of the responses (particularly those which are germane to the ORNL.) The results of the survey will be categorized as follows: (1) Desire to partner again with ORNL; (2) Benefits obtained by the company from the partnership; and (3) LTR Program ratings assigned in 11 key areas (i.e., quality of work, expertise, protection of intellectual property, value, facilities, understanding company needs, reliability of funding, schedule responsiveness, project management, contract negotiation, and contract administration.) More information about the LTR Program can be found at http://www.er.doe.gov/production/octr/aentr/aeptrnr.html.

Payne, T.L.; Kniel, C.

2000-02-01T23:59:59.000Z

28

pine (mail utility info)  

NLE Websites -- All DOE Office Websites (Extended Search)

pine (mail utility info) pine (mail utility info) Basics, FAQ, etc, On our UNIX machines, module load pine The line module load pine should ALSO be in the file ~/.rc/user_modules (The pine module also includes pico) pine usage with IMAP4 (UNIX) Moving pine email files into IMAP4 LBNL UNIX info on pine links to Pine Information Center Pine 4.2.1/Solaris: Forwarding as attachment; the following procedure has proved successful for at least some users: Check the option "enable-full-header-cmd". To get to this option, 1. M (Main Menu) 2. S (Setup) "Choose a setup task from the menu below :" 3. C (Configure) 4. Scroll down to "Advanced Command Preferences", and press "X" to set "enable-full-header-cmd". It looks like this: ================================================================

29

A Survey of the U.S. ESCO Industry: Market Growth and Development from 2008 to 2011  

E-Print Network (OSTI)

Evolution of the U.S. Energy Service Company Industry: NewAn international survey of the energy service company (ESCO)Association of Energy Service Companies Environmental Energy

Satchwell, Andrew

2010-01-01T23:59:59.000Z

30

Industry  

E-Print Network (OSTI)

from refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processes

Bernstein, Lenny

2008-01-01T23:59:59.000Z

31

Tax and Fiscal Policies for Promotion of Industrial EnergyEfficiency: A Survey of International Experience  

SciTech Connect

The Energy Foundation's China Sustainable Energy Program (CSEP) has undertaken a major project investigating fiscal and tax policy options for stimulating energy efficiency and renewable energy development in China. This report, which is part of the sectoral sub-project studies on energy efficiency in industry, surveys international experience with tax and fiscal policies directed toward increasing investments in energy efficiency in the industrial sector. The report begins with an overview of tax and fiscal policies, including descriptions and evaluations of programs that use energy or energy-related carbon dioxide (CO2) taxes, pollution levies, public benefit charges, grants or subsidies, subsidized audits, loans, tax relief for specific technologies, and tax relief as part of an energy or greenhouse gas (GHG) emission tax or agreement scheme. Following the discussion of these individual policies, the report reviews experience with integrated programs found in two countries as well as with GHG emissions trading programs. The report concludes with a discussion of the best practices related to international experience with tax and fiscal policies to encourage investment in energy efficiency in industry.

Price, Lynn; Galitsky, Christina; Sinton, Jonathan; Worrell,Ernst; Graus, Wina

2005-09-15T23:59:59.000Z

32

PMP2000: Mailing List Form  

Science Conference Proceedings (OSTI)

Name. Title. Organization. Street/P.O. Box. City. State/Province. Zip/Postal Code. Country. Telephone. Fax. E-Mail Address...

33

RADIOACTIVE WASTE DISPOSAL PRACTICES IN THE ATOMIC ENERGY INDUSTRY. A Survey of the Costs  

SciTech Connect

A survey was made on methcds and related costs of disposing of radioactive wastes as practiced in 1955 by twelve atomic industry installations. Wherever possible, estimated unit costs of differentiated stages of waste handling are shown- these are integrated to show the over-all scope of waste dispesal practices at each site. Tabular data summarize costs and operation magnitades at the installations. A pattern is established for standardizing the reporting of fixed costs and equipment unsage costs. The economy of solid waste volume reduction is analyzed. Material costs are listed. An outline for recording monthly waste disposal costs is presented. Obvious conclusions drawn from the factual data are: that it is more expensive per cubic foot to handle high-level wastes than low-level wastes. and that land disposal is less expenaive than sea disposal. A reexamination of baling economics shows that high compression of solid wastes is more expensive than simpler forms of compaction. (auth)

Joseph, A.B.

1955-12-31T23:59:59.000Z

34

Federal Energy Management Program: Industrial Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Facilities to someone by E-mail Share Federal Energy Management Program: Industrial Facilities on Facebook Tweet about Federal Energy Management Program: Industrial...

35

Industry  

E-Print Network (OSTI)

the paper, glass or ceramics industry) making it difficulttechnology in the ceramic manufacturing industry. industries: iron and steel, non-ferrous metals, chemicals (including fertilisers), petroleum refining, minerals (cement, lime, glass and ceramics) and

Bernstein, Lenny

2008-01-01T23:59:59.000Z

36

Industry  

E-Print Network (OSTI)

in the iron and steel industry: a global model. Energy, 30,report of the world steel industry 2005. International Irontrends in the iron and steel industry. Energy Policy, 30,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

37

UTC e-mail | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

UTC e-mail UTC e-mail Fuel Cells in the QTR UTC e-mail More Documents & Publications Air Products Hydrogen Energy Systems Fuel Cell and Hydrogen Energy Association...

38

Industry  

E-Print Network (OSTI)

and power in US industry. Energy Policy, 29, pp. 1243-1254.Paris. IEA, 2004: Energy Policies of IEA Countries: Finlandand steel industry. Energy Policy, 30, pp. 827-838. Kim, Y.

Bernstein, Lenny

2008-01-01T23:59:59.000Z

39

Market assessment for active solar heating and cooling products. Category B: A survey of decision makers in the HVAC market place. Survey instruments  

DOE Green Energy (OSTI)

Telephone screener questionnaires and mail-out questionnaires for marketing surveys for solar heating and cooling equipment are presented. Questionnaires are included for the residential segment, industrial segment, HVAC professionals segment, builder/developer segment, and the commercial segment. No results are reported. (WHK)

Lilien, G. L.; Johnston, P. E.

1980-09-01T23:59:59.000Z

40

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and...

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Alternative Fuels Data Center: Biofuels Industry Development...  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Biofuels Industry Development Grants to someone by E-mail Share Alternative Fuels Data Center: Biofuels Industry Development Grants on Facebook Tweet about Alternative Fuels Data...

42

Vehicle Technologies Office: DOE & Industry Partners Unveil ...  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE & Industry Partners Unveil 'More Electric Truck' at Trucking Show to someone by E-mail Share Vehicle Technologies Office: DOE & Industry Partners Unveil 'More Electric Truck'...

43

Gulf of Mexico Gas Hydrate Joint Industry Project Leg II: Walker Ridge 313 LWD Operations and Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Cook Cook 1 , Gilles Guerin 1 , Stefan Mrozewski 1 , Timothy Collett 2 , & Ray Boswell 3 Walker Ridge 313 LWD Operations and Results Gulf of Mexico Gas Hydrate Joint Industry Project Leg II: 1 Borehole Research Group Lamont-Doherty Earth Observatory of Columbia University Palisades, NY 10964 E-mail: Cook: acook@ldeo.columbia.edu Guerin: guerin@ldeo.columbia.edu Mrozewski: stefan@ldeo.columbia.edu 3 National Energy Technology Laboratory U.S. Department of Energy P.O. Box 880 Morgantown, WV 26507 E-mail: ray.boswell@netl.doe.gov 2 US Geological Survey Denver Federal Center, MS-939 Box 25046 Denver, CO 80225 E-mail:

44

1980 Active-Solar Installations Survey  

SciTech Connect

The survey covers active solar installations made during and prior to calendar year 1980. As the first survey of active solar installations in the United States, the objective was to establish a national baseline information system that could provide current data on residential and commercial active solar installations as well as a listing of firms involved in the active solar industry, including installers. Potential respondents were identified from regional lists of solar equipment dealers and installers compiled by each Regional Solar Energy Center (RSEC). The RSEC lists were computerized and combined into a mailing list of 5466 company names and addresses. An additional 1619 referrals, were provided by survey respondents from the RSEC list. However, because of resource constraints, 981 of these referrals were not included in the survey. To substantiate that the results of this survey represent accurate statistics on the number of active solar installations in the United States, a comparison was made to the Solar Collector Manufacturing Survey installations. (PSB)

1982-10-01T23:59:59.000Z

45

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

An Exploration of Innovation and An Exploration of Innovation and Energy Efficiency in an Appliance Industry Prepared by Margaret Taylor, K. Sydny Fujita, Larry Dale, and James McMahon For the European Council for an Energy Efficient Economy March 29, 2012 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY LBNL - 5689E An Exploration of Innovation and Energy Efficiency in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and direction of technological change of product industries; the factors that underlie the outcomes of innovation in these industries; and the ways the innovation system might respond to any given intervention. The report provides an overview of the dynamics of energy efficiency policy and innovation in the appliance

46

Industry  

E-Print Network (OSTI)

milling industry: An ENERGY STAR Guide for Energy and Plantcement mak- ing - An ENERGY STAR Guide for Energy and Plantre- fineries - An ENERGY STAR Guide for Energy and Plant

Bernstein, Lenny

2008-01-01T23:59:59.000Z

47

Tax and Fiscal Policies for Promotion of Industrial Energy Efficiency: A Survey of International Experience  

E-Print Network (OSTI)

IEA), 2004b. Renewable Energy Policy Review, Sweden. Paris:and Challenges, Energy Policy, Vol. 26, No. 11: 813-829.in Chinese Industry," Energy Policy 22 pp.239 255. Sinton,

Price, Lynn; Galitsky, Christina; Sinton, Jonathan; Worrell, Ernst; Graus, Wina

2005-01-01T23:59:59.000Z

48

Industry Survey and Assessment of Available Corrosion Mitigation Technologies: 20th Century State of the Art  

Science Conference Proceedings (OSTI)

This report summarizes the findings of searching various industry databases and soliciting information from suppliers regarding available corrosion detection of mitigation technologies. The focus of the search was for methods that can mitigate, detect, or monitor corrosion on pipe-type cable systems; methods appropriate for submarine cables were also considered. Special attention was given to new corrosion technologies or the application of different technologies from associated industries. Information w...

2000-03-31T23:59:59.000Z

49

Survey of Instrumentation and Control Practices in the Process Industries for Application to the Power Utilities  

Science Conference Proceedings (OSTI)

With impending deregulation and ever-tightening environmental constraints, utilities are increasing their emphasis on maximizing operating efficiency and reducing maintenance and operational costs. It is likely that utilities can use the capabilities of modern control and information management systems more effectively than they currently do. This report documents lessons learned over many years by experts in the process industries that might benefit the utility industry as it transitions to a competitiv...

1999-04-08T23:59:59.000Z

50

Industry  

Science Conference Proceedings (OSTI)

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01T23:59:59.000Z

51

C. KIMBLE & V. B. PRABHU -CIM and Manufacturing Industry in the North East of England: a Survey of some Current Issues in Ergonomics of Advanced Manufacturing  

E-Print Network (OSTI)

C. KIMBLE & V. B. PRABHU - CIM and Manufacturing Industry in the North East of England: a Survey. Pub Elsevier publications, 1988, pp 133 - 140. ISBN 0 444 70486 8 CIM AND MANUFACTURING INDUSTRY and the computer technologies it uses. One label often applied to this approach is CIM (Computer Integrated

Kimble, Chris

52

Electricity in lieu of nautral gas and oil for industrial thermal energy: a preliminary survey  

SciTech Connect

In 1974, industrial processors accounted for nearly 50% of the nation's natural gas consumption and nearly 20% of its consumption of petroleum. This report is a preliminary assessment of the potential capability of the process industries to substitute utility-generated electricity for these scarce fuels. It is tacitly assumed that virtually all public utilities will soon be relying on coal or nuclear fission for primary energy. It was concluded that the existing technology will permit substitution of electricity for approximately 75% of the natural gas and petroleum now being consumed by industrial processors, which is equivalent to an annual usage of 800 million barrels of oil and 9 trillion cubic feet of gas at 1974 levels. Process steam generation, used throughout industry and representing 40% of its energy usage, offers the best near-term potential for conversion to electricity. Electric boilers and energy costs for steam are briefly discussed. Electrically driven heat pumps are considered as a possible method to save additional low-grade energy. Electrical reheating at high temperatures in the primary metals sector will be an effective way to conserve gas and oil. A wholesale shift by industry to electricity to replace gas and oil will produce impacts on the public utilities and, perhaps, those of a more general socio-economic nature. The principal bar to large-scale electrical substitution is economics, not technology. 174 references.

Tallackson, J. R.

1979-02-01T23:59:59.000Z

53

Daylighting practices of the architectural industry (baseline results of a national survey)  

DOE Green Energy (OSTI)

A national survey of over 300 commercial design architects was conducted to develop baseline information on their knowledge, perceptions, and use of daylighting in commercial building designs. Pacific Northwest Laboratory conducted the survey for the US Department of Energy's (DOE) Office of Building and Community Systems (BCS). In the survey daylighting was defined as the intentional use of natural light as a partial substitute for artificially generated light. The results suggested that architects need to be educated about the true benefits of daylighting and the impacts it can have on a building's energy performance. Educational programs that will increase the architects' understanding and awareness of modern daylighting technologies and practices should be developed by utilities, stage agencies, and the federal government. If more architects can be made aware of the true effectiveness and positive attributes of daylighting systems and technologies, daylighting may be used in more commercial buildings. The results of the survey show that the more familiar architects feel they are with daylighting, the more they use daylighting. 3 refs., 19 tabs.

Hattrup, M.P.

1990-05-01T23:59:59.000Z

54

National survey of industrial markets for steam produced from burning municipal solid waste  

DOE Green Energy (OSTI)

This report presents the methodology and findings of an analysis to determine the maximum size of the industrial market for steam produced from municipal solid waste in the United States. The data used in the analysis were developed from the 1980 census report and the US Chamber of Commerce's 1979 Standard Industrial Classification (SIC) listing. The process used to match potential steam users with populations large enough to generate suitable quantities of waste is presented. No attempt was made to rank the markets or analyze the market economics.

Pearson, C.V.

1983-09-01T23:59:59.000Z

55

Invited Review: Industrial aspects and literature survey: Combined inventory management and routing  

Science Conference Proceedings (OSTI)

This paper describes industrial aspects of combined inventory management and routing in maritime and road-based transportation, and gives a classification and comprehensive literature review of the current state of the research. The literature is contrasted ... Keywords: Inventory management, Inventory routing, Vehicle routing

Henrik Andersson; Arild Hoff; Marielle Christiansen; Geir Hasle; Arne Lkketangen

2010-09-01T23:59:59.000Z

56

Industry-Wide Error Rate Database in Power Switching: Switching Practices Survey  

Science Conference Proceedings (OSTI)

This report describes a survey that was conducted in 2013 to collect data on utility practices in operational power switching and on rates of switching errors. Over the years, the Electric Power Research Institute (EPRI) Switching Safety and Reliability (SS&R) project has developed two previous estimates of switching errors. These estimates were derived as part of research reported in the 1996 EPRI report Field Operation Power Switching Safety (TR-106465) and in the 2000 EPRI report ...

2013-11-19T23:59:59.000Z

57

A utility survey and market assessment on repowering in the electric power industry  

SciTech Connect

Section 1 of this report provides a background about the DOE High Performance Power Systems (HIPPS) program. There are two kinds of HIPPS cycles under development. One team is led by the Foster Wheeler Development Corporation, the other team is led by the United Technologies Research Center. These cycles are described. Section 2 summarizes the feedback from the survey of the repowering needs of ten electric utility companies. The survey verified that the utility company planners favor a repowering for a first-of-a-kind demonstration of a new technology rather than an all-new-site application. These planners list the major factor in considering a unit as a repowering candidate as plant age: they identify plants built between 1955 and 1965 as the most likely candidates. Other important factors include the following: the need to reduce operating costs; the need to perform major maintenance/replacement of the boiler; and the need to reduce emissions. Section 3 reports the results of the market assessment. Using the size and age preferences identified in the survey, a market assessment was conducted (with the aid of a power plant data base) to estimate the number and characteristics of US generating units which constitute the current, primary potential market for coal-based repowering. Nearly 250 units in the US meet the criteria determined to be the potential repowering market.

Klara, J.M. [USDOE Pittsburgh Energy Technology Center, PA (United States); Weinstein, R.E. [Parsons Power Group Inc., Reading, PA (United States); Wherley, M.R. [Science Applications International Corp., Reston, VA (United States)

1996-08-01T23:59:59.000Z

58

Industrial  

Gasoline and Diesel Fuel Update (EIA)

Industrial Industrial 8,870,422 44.3% Commercial 3,158,244 15.8% Electric Utilities 2,732,496 13.7% Residential 5,241,414 26.2% Source: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." T e x a s L o u i s i a n a C a l i f o r n i a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Industrial Billion Cubic Meters T e x a s C a l i f o r n i a F l o r i d a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Electric Utilities Billion Cubic Meters N e w Y o r k C a l i f o r n i a I l l i n o i s A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Commercial Billion Cubic Meters I l l i n o i s C a l i f o r n i a N e w Y o r k A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Residential Billion Cubic Meters 11. Natural Gas Delivered to Consumers in the United States, 1996 Figure Volumes in Million Cubic Feet Energy Information Administration

59

Lost circulation in geothermal wells: survey and evaluation of industry experience  

DOE Green Energy (OSTI)

Lost circulation during drilling and completion of geothermal wells can be a severe problem, particularly in naturally fractured and/or vugular formations. Geothermal and petroleum operators, drilling service companies, and independent consultants were interviewed to assess the lost circulation problem in geothermal wells and to determine general practices for preventing lost circulation. This report documents the results and conclusions from the interviews and presents recommendations for needed research. In addition, a survey was also made of the lost circulation literature, of currently available lost circulation materials, and of existing lost circulation test equipment.

Goodman, M.A.

1981-07-01T23:59:59.000Z

60

CPEP products and Mailing List  

NLE Websites -- All DOE Office Websites (Extended Search)

CPEP es una organización sin fines de lucro formada por profesores, CPEP es una organización sin fines de lucro formada por profesores, educadores, y físicos. Los materiales preparados por el CPEP presentan los conocimientos actuales sobre la naturaleza fundamental de la materia y la energía, incorporando los principales descubrimientos e investigaciones de las tres últimas décadas. Los productos desarrollados por el CPEP están disponibles por intermedio de nuestro distribuidor: Science Kit 777 Park Drive Tonawanda, NY 14150 USA Phone: 1(800)828-7777 or 1(716)874-6020 FAX: 1(716)874-9572 Para obtener información (sin efectuar una orden de compra) o para ser incorporado en nuestra lista de correo dirigirse a: E-mail: pdg@lbl.gov or Call: 1(510)486-5885, or Write: CPEP MS 50-308, Lawrence Berkeley National Laboratory,

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Survey of industrial coal conversion equipment capabilities: high-temperature, high-pressure gas purification  

SciTech Connect

In order to ensure optimum operating efficiencies for combined-cycle electric generating systems, it is necessary to provide gas treatment equipment capable of operating at high temperatures (>1000/sup 0/F) and high pressure (>10 atmospheres absolute). This equipment, when assembled in a process train, will be required to condition the inlet stream to a gas turbine to suitable levels of gas purity (removal of particulate matter, sulfur, nitrogen, and alkali metal compounds) so that it will be compatible with both environmental and machine constraints. In this work, a survey of the available and developmental equipment for the removal of particulate matter and sulfur compounds has been conducted. In addition, an analysis has been performed to evaluate the performance of a number of alternative process configurations in light of overall system needs. Results from this study indicate that commercially available, reliable, and economically competitive hot-gas cleanup equipment capable of conditioning raw product gas to the levels required for high-temperatue turbine operation will not be available for some time.

Meyer, J. P.; Edwards, M. S.

1978-06-01T23:59:59.000Z

62

Mail and Distribution | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Facility Operations Food Services Graphics Mail and Distribution Parking and Garage Photography Printing Recycling Safety and Health Shuttle Bus and Couriers Supply...

63

Special Mailing Distribution Lists | Staff Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Special Mailing Distribution Lists Special Mailing Distribution Lists Special mailing distribution lists -- to be used repeatedly over long periods of time -- may be established by written request to the Senior Communications Clerk, at mailroomdl@bnl.gov. It is important to notify the Senior Communications Clerk of all changes to the Mailing Distribution Lists. Assignments to all other Standard Distribution Lists are made automatically according to each employee's personnel code. Deletions resulting from terminations are effected automatically. The Mail Room maintains an automatic addressing system for the following Standard Distribution Lists: Director's Office; Department Chairs and Division Managers and their Deputies, Associate, Assistant and Acting Chairs; Division and major Section Heads in the Departments and Divisions; BSA Board of Directors.

64

Field Facilities Contacts for Printing and Mail  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facilities Contacts for Printing and Mail Facilities Contacts for Printing and Mail Print and Mail Contacts Site Printing Contact Mail Contact NNSA, Albuquerque Deborah Miller (505) 845-6049 Thomas H. Clinkenbeard NNSA Service Center PO Box 5400 Albuquerque, NM 87185-5400 (505) 845-4602 tclinkenbeard@doeal.gov (mailto:tclinkenbeard@doeal.gov) Argonne National Laboratory Doreen Schoening Argonne National Laboratory U.S. Department of Energy 9700 South Cass Avenue Blvd 340 Lemonmt, IL 60439 (630) 840-6399 dschoening@anl.gov (mailto:dschoening@anl.gov) Bechtel Jacobs James Hughes Bechtel Jacobs - Mail Stop 7294 U.S. Department of Energy PO Box 4699 Oak Ridge, TN 37831 (865) 576-8423 Berkeley Site Office Mercedes Downing Berkeley Site Office U.S. Department of Energy 1 Cyclotron Road Bldg 90

65

Advanced Manufacturing Office: Western Industrial Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Send a link to Advanced Manufacturing Office: Western Industrial Energy Efficiency & Combined Heat and Power Regional Dialogue Meeting to someone by E-mail Share Advanced...

66

Export.gov - Energy Industry Associations  

NLE Websites -- All DOE Office Websites (Extended Search)

Problems Locations Domestic Offices International Offices FAQ Blog Connect Home > By Industry > Energy Print | E-mail Page Main Topics Energy Home Oil & Gas Civil Nuclear...

67

Unsubscribe from the Depleted UF6 E-mail List  

NLE Websites -- All DOE Office Websites (Extended Search)

Services Unsubscribe Unsubscribe from the Depleted UF6 E-mail List This form allows you to remove yourself from the Depleted UF6 e-mail list. Type your e-mail address here:...

68

NPDES Individual Permit for Industrial Facilities - Mail Merge Template  

NLE Websites -- All DOE Office Websites (Extended Search)

No. TN0002968 No. TN0002968 Authorization to discharge under the National Pollutant Discharge Elimination System (NPDES) Issued By Tennessee Department of Environment and Conservation Division of Water Pollution Control 401 Church Street 6th Floor, L & C Annex Nashville, Tennessee 37243-1534 Under authority of the Tennessee Water Quality Control Act of 1977 (T.C.A. 69-3-101 et seq.) and the delegation of authority from the United States Environmental Protection Agency under the Federal Water Pollution Control Act, as amended by the Clean Water Act of 1977 (33 U.S.C. 1251, et seq.) Discharger: USDOE-Oak Ridge Y12 National Security Complex is authorized to discharge: process wastewaters and other wastewaters which have been accepted for treatment via waste acceptance procedures, cooling

69

Minutes from the Print and Mail Managers Exchange Forum Teleconferences |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Minutes from the Print and Mail Managers Exchange Forum Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences. Contact the Office of Administrative Management and Support at (202) 586-4318 with any questions. Last updated 04/01/13 Minutes from the March 14, 2013 Printing and Mail Teleconference Minutes from the January 10, 2013 Printing and Mail Teleconference Minutes from the November 01, 2012 Printing and Mail Teleconference Minutes from the June 28, 2012 Printing and Mail Teleconference Minutes from the May 03, 2012 Printing and Mail Teleconference Minutes from the February 23, 2012 Printing and Mail Teleconference Minutes from the October 26, 2011 Printing and Mail Teleconference

70

Control center survey: Installed and planned applications software  

SciTech Connect

This project surveyed the utility industry use of applications. In addition, the survey collected information regarding future plans to add applications, interest in and knowledge about new control center technologies and identification of current problems that might be solved by new software applications. Over three hundred (300) utilities were surveyed consisting of the investor-owned, rural electric generation and transmission cooperatives, municipal power pools and federally chartered utilities. Of these utilities, 10 are Canadian and 7 are power pools. The rest are United States utilities having a peak demand on installed capacity above 200 MW. The survey was conducted by mailing a questionnaire and/or following up with a telephone call. Information was received from 282 utilities, a 94% response. 13 figs., 14 tabs.

Not Available

1990-02-01T23:59:59.000Z

71

MIME Extensions for Mail-Enabled Applications: application/Safe-Tcl and multipart/enabled-mail  

E-Print Network (OSTI)

MIME [RFC-MIME] defines a format and general framework for the representation of a wide variety of data types in Internet mail. This document defines two new subtypes of MIME data, the application/Safe-Tcl and multipart/enabled-mail subtypes, for providing Enabled Mail [EM-MODEL] in the Internet community. A table of contents appears at the end of this document. 1. Overview Most electronic mail, even multimedia mail as standardized in MIME [RFC-MIME], is "passive" in the sense that the data are unidirectional. Textual, image, audio, or video data are simply displayed to the user, who reads, views, listens, or watches it and then must take specific action to initiate any response to the data, such as to reply to the originator, to replay the data, or to redistribute it to other recipients. Less commonly used, but the subject of considerable research attention, has been "active" mail, in which the data delivered through the mail constitute a program in a well-specified language, allowi...

Nathaniel Borenstein; Nathaniel Borenstein Bellcore

1993-01-01T23:59:59.000Z

72

April 7, 2008 Dr. Mark Myers, Director US Geological Survey ...  

Science Conference Proceedings (OSTI)

... US Geological Survey 12201 Sunrise Valley Drive, Mail ... The Central and Eastern United States hazard ... coastal California and the Basin and Range ...

2011-01-26T23:59:59.000Z

73

A Survey of the U.S. ESCO Industry: Market Growth and Development from 2008 to 2011  

SciTech Connect

In this study, LBNL analyzes the current size of the Energy Service Company (ESCO) industry, industry growth projections to 2011, and market trends in order to provide policymakers with a more indepth understanding of energy efficiency activity among private sector firms. We draw heavily on information from interviews with ESCOs conducted from October 2009 to February 2010 and from our review of publicly available financial information regarding individual ESCOs. A significant ramp-up in energy efficiency activities is occurring at the local, state, and federal level. These activities include the establishment in {approx}18 states of statewide energy savings goals to be obtained from adoption of an Energy Efficiency Resource Standard (EERS), legislative or state regulatory directives to obtain all cost-effective demand-side resources (Barbose et al 2009), and a significant increase in federal funding for energy efficiency programs as part of the American Recovery and Reinvestment Act (ARRA). As part of this increased focus on energy efficiency, policymakers are evaluating the role of private sector companies, including ESCOs, in delivering cost-effective energy savings to end-users. The U.S. ESCO industry has long been recognized for its role in successfully delivering comprehensive energy projects in the public sector. This study analyzes the current size of the ESCO industry, industry growth projections, and market trends in order to provide policymakers with a more in-depth understanding of energy efficiency activity among private sector firms. This study may also be of interest to policymakers abroad who are exploring options to encourage development of a private-sector energy services industry in their own countries. This study draws heavily on information from interviews with ESCOs conducted from October 2009 to February 2010 and is part of a series of ESCO industry reports prepared by Lawrence Berkeley National Laboratory (LBNL) in collaboration with the National Association of Energy Services Companies (NAESCO). The analysis builds on previous ESCO industry reports (see Goldman et al. 2005 and Hopper et al. 2007) and provides updated estimates of ESCO industry revenues and ESCO views on perceived trends in costs and savings.

Satchwell, Andrew; Goldman, Charles; Larsen, Peter; Gilligan, Donald; Singer, Terry

2010-06-08T23:59:59.000Z

74

Industrial Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Industrial Industrial / Manufacturing Buildings Industrial/manufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey (MECS). See the MECS home page for further information. Commercial buildings found on a manufacturing industrial complex, such as an office building for a manufacturer, are not considered to be commercial if they have the same owner and operator as the industrial complex. However, they would be counted in the CBECS if they were owned and operated independently of the manufacturing industrial complex. Specific questions may be directed to: Joelle Michaels joelle.michaels@eia.doe.gov CBECS Manager Release date: January 21, 2003 Page last modified: May 5, 2009 10:18 AM http://www.eia.gov/consumption/commercial/data/archive/cbecs/pba99/industrial.html

75

State of the Art of Artificial Intelligence and Predictive Analytics in the E&P Industry: A Technology Survey  

E-Print Network (OSTI)

) production management, (5) process control, (6) filtering/cleaning data, and (7) virtual metering and event/Cleansing Data VirtualMetering& Events recognition FaultDetection SurfaceFacility Modeling& Simulation related to several E&P operations and service companies is presented. This survey captures the level of AI

Mohaghegh, Shahab

76

Minutes from the January 10, 2013 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 10, 2013 January 10, 2013 Mail discussion Al Majors opened the meeting by discussing the Mail Management Report and latest update on status. One final report is yet to be submitted, after which close out will be accomplished. Copies will be provided to the Mail Managers once completed. Al introduced Derrick Miliner, Program Manager from the General Services Administration, Office of Government-wide Policy, and acknowledged Mr. Miliner's role in completing the Mail Management Report. Mail Security Plans A number of unclassified site specific mail security plans have been received. Requirement for classified site specific mail security plans is to submit a letter or email stating that the classified plan is in place. Mail Manager Change Notification to Headquarters

77

Minutes from the June 28, 2012 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 28, 2012 Mail discussion Al Majors opened the meeting by introducing United Parcel Service (UPS) Representative Shelly Scott. Ms. Scott's contact information is: Shelly Scott shellyscott@ups.com 404 402-9827 (cell) Ms. Scott discussed issues relating to various UPS services available to the department. Next Al introduced Michael R. Sanders, President and Chief Executive Officer of Intra-Mail Network, an innovative, information Technology Company that improves the delivery of mail or email to individuals at institutions. Mr. Sanders provided an overview of services and capabilities available to help eliminate mailing-related problems. DOE Headquarters Mail Center is currently conducting a mailing list clean up (pilot) with Intra-Mail Network to eliminate the unwanted incoming junk mail addressed to Headquarters

78

arXiv.org - Mailings from the physics archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Mailings from the physics archive Submissions to the new physics archive and the reorganized cond-mat archive now include Subj-class: headings . It is possible to receive mailings...

79

Intraorganizational Versus Interorganizational Uses and Benefits of Electronic Mail  

Science Conference Proceedings (OSTI)

The success of an organization depends on rapid, reliable, and direct communications within the organization and with the outside world. To determine if electronic mail e-mail provides a competitive benefit, a sample of 99 management-level participants ...

Denise J. McManus; Chetan Sankar; Houston H. Carr; F. Nelson Ford

2002-07-01T23:59:59.000Z

80

Simulation-based optimization of a complex mail transportation network  

Science Conference Proceedings (OSTI)

The Swedish Postal Services receives and distributes over 22 million pieces of mail every day. Mail transportation takes place overnight by airplanes, trains, trucks, and cars in a transportation network comprising a huge number of possible routes. For ...

Anna Syberfeldt; Henrik Grimm; Amos Ng; Martin Andersson; Ingemar Karlsson

2008-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Vehicle Technologies Office: Fact #528: July 21, 2008 Survey...  

NLE Websites -- All DOE Office Websites (Extended Search)

8: July 21, 2008 Survey Shows Most Americans Expect Gas Prices to Reach 5 This Year to someone by E-mail Share Vehicle Technologies Office: Fact 528: July 21, 2008 Survey Shows...

82

Industrial-hygiene survey report of General Electric Company, Albuquerque, New Mexico, April 18-24, 1989  

Science Conference Proceedings (OSTI)

A walk through survey was conducted at the General Electric Company (SIC-3079), located in Albuquerque, New Mexico, to obtain information on the extent of exposure to 4,4{prime}-methylenedianiline (101779) (MDA) during hand layup work with preimpregnated graphite fabric while making molded jet engine parts, to obtain information on the elimination of MDA in the urine of potentially exposed workers, and to identify deficiencies in the handling of MDA and to offer recommendations for improving worker protection. A total of 210 worker urine samples was taken. Other samples taken included air samples, samples of glove washings, surface wipe samples, shoe samples, and bulk samples. From the data obtained it was possible to estimate the primary sources of exposure and their relative importance. Comparing the mass of airborne MDA inhaled with the amounts measured in the urine the following day suggested that skin contact was a significant contributory route of exposure. The author states that further efforts should therefore be made to reduce this exposure. Such efforts would include the selection of better personal protective equipment and improved work practices. Possible engineering modifications would be limited due to the manual nature of the work involved.

Boeniger, M.F.

1990-12-01T23:59:59.000Z

83

Minutes from the Print and Mail Managers Exchange Forum Teleconference...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Mail Teleconference More Documents & Publications Identification and Prioritization of Technical Issues July 19, 2012 SEAB Minutes Lessons Learned Quarterly Report, March 2013...

84

Advanced Manufacturing Office: Industrial Assessment Centers (IACs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Assessment Industrial Assessment Centers (IACs) to someone by E-mail Share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Facebook Tweet about Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Twitter Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Google Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Delicious Rank Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Digg Find More places to share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on AddThis.com... Industrial Assessment Centers (IACs) Learn More Learn how companies have benefited from IAC assessments. Search the IAC Database for recommendations and savings achieved.

85

Data-Driven Mailing Helps Heat Up Untapped Seattle Market  

NLE Websites -- All DOE Office Websites (Extended Search)

Focus Series Focus Series Data-Driven Mailing Helps Heat Up Untapped Seattle Market Recognizing owners of oil-heated homes in Seattle, Washington, as a long-untapped market, Community Power Works engaged them through a direct mail campaign in April 2012. Not only did the mailing generate hundreds of sign-ups, but the number of oil-heated homes initiating upgrades increased to 50% in the six months after the mailing. In the interview below, Community Power Works Project Manager Ruth Bell and Program/System Analyst Vince Schueler of the Washington State University (WSU) Energy Program 1 provide a summary of the successes and lessons learned. Following the interview is an example letter used by Community Power Works in its direct mail outreach. Q. Why focus on oil-heated homes in Seattle?

86

Salary Survey Top Industries | Individual  

E-Print Network (OSTI)

to graduation. The new report contains more data, and the data are more robust, allowing for additional analysis additional changes: First, in the past, the Winter report had been the first report for the new year's class the most new graduates of a particular major. (example: average salary that manufacturing firms

Miami, University of

87

Survey of solar homeowners  

SciTech Connect

Some key results are presented of a national mail survey of 3800 solar homeowners. The solar owners expressed their perceptions about performance, cost, problem areas, and their own motivations and degree of satisfaction. Various types of residential solar installations are represented, including active and passive water heating, space heating, and wind energy systems. After each question put to the respondents, the breakdown of answers is listed and a brief interpretation of the findings is presented. (LEW)

1981-09-01T23:59:59.000Z

88

Uranium industry annual 1998  

SciTech Connect

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

NONE

1999-04-22T23:59:59.000Z

89

Minutes from the May 26, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

26, 2010 26, 2010 Printing and Mail Managers Exchange Forum Teleconference Seventeen individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the FY 2010, Congressional Joint Committee on Printing Commercial Printing Report "JCP Form No. 2" Dallas Woodruff, Headquarters informed the group that Headquarters received responses from all DOE printing and duplicating facilities. The report is due to the Congressional Joint Committee on Printing no later than May 31, 2010.

90

Internet Dial-In Infodisk E-Mail Diskette Natural Gas Annual,  

Gasoline and Diesel Fuel Update (EIA)

Internet Internet Dial-In Infodisk E-Mail Diskette Natural Gas Annual, 1996 Provides information on supply and disposition of natural gas in the United States. Information is provided nationally, regionally, and by State for 1996. Historical Natural Gas Annual, 1930 through 1996 Contains historical information about supply and disposition of natural gas at the national, regional, and State level, as well as prices at selected points in the flow of gas from wellhead to burnertip. Natural Gas 1996: Issues and Trends Examines how industry restructuring continues to expand choices, and challenges, for industry, participants, and natural gas customers. Natural Gas 1995: Issues and Trends Addresses current issues affecting the natural gas industry and markets, and analyzes trends in the most recent natural gas data. Natural Gas 1994: Issues and Trends Provides an overview of the natural

91

This form may be submitted to the EIA by mail, fax, e-mail, or secure file trans  

U.S. Energy Information Administration (EIA) Indexed Site

using a secure method of transmission: HTTPS. This is an industry standard method to send information over the web using secure, encrypted processes. (It is the same method that commercial companies communicate with customers when transacting business on the web.) To use this service, we recommend the use of Microsoft Internet Explorer 5.5 or later or Netscape 4.77 or later. Send your surveys using this secure method at: https://idc.eia.doe.gov/upload/noticeoog.jsp." using a secure method of transmission: HTTPS. This is an industry standard method to send information over the web using secure, encrypted processes. (It is the same method that commercial companies communicate with customers when transacting business on the web.) To use this service, we recommend the use of Microsoft Internet Explorer 5.5 or later or Netscape 4.77 or later. Send your surveys using this secure method at: https://idc.eia.doe.gov/upload/noticeoog.jsp." ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,," OMB No. 1905-0057" ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,," Expiration Date: 7/31/2016" ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,," Version No: 2013.002" "ANNUAL REPORT OF THE ORIGIN OF NATURAL GAS LIQUIDS PRODUCTION"

92

Headquarters Program & Staff Office Mailing Addresses | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Headquarters Program & Staff Office Mailing Headquarters Program & Staff Office Mailing Addresses Headquarters Program & Staff Office Mailing Addresses The following addresses are for delivery of regular mail and small packages: Delivery to the Headquarters buildings in Washington, DC: Name of Individual Title Routing Symbol/Forrestal Building U.S. Department of Energy 1000 Independence Ave., S.W. Washington, DC 20585 Name of Individual Title Routing Symbol/L'Enfant Plaza Building U.S. Department of Energy 1000 Independence Ave., S.W. Washington, DC 20585-1615 Delivery to the Headquarters buildings in Germantown, MD: Name of Individual Title Routing Symbol/Germantown Building U.S. Department of Energy 1000 Independence Ave., S.W. Washington, DC 20585-1290 Name of Individual Title Routing Symbol/Cloverleaf Building

93

Minutes from the September 15, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 15, 2010 Printing and Mail Managers Exchange Forum Teleconference September 15, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-four individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming FY 2010 Department-wide Three-Year Plan Dallas Woodruff, Headquarters informed the group that the programmer has been making modifications to the spreadsheets such as the narrative section, equipment installed year, sites data consolidation etc. The enhancement to the narrative section will allow sites to enter data into the four narrative sections, which allow

94

Collaborative spam filtering using e-mail networks  

E-Print Network (OSTI)

program determines that (TTL). the e-mail is de?nitely spam,walk of the same length as the TTL on a short random walklength l, which is the TTL. used in the content implantation

Kong, Joseph S; Rezaei, B A; Sarshar, N; Roychowdhury, V P; Boykin, P O

2006-01-01T23:59:59.000Z

95

Name Title Work Phone Work E-Mail  

NLE Websites -- All DOE Office Websites (Extended Search)

12012 EOTA - STAFF Name Title Work Phone Work E-Mail Melissa Otero Program Manager 505-842-7112 motero@eota.energy.gov Janet Lee Online Learning Support Specialist 505-842-7110...

96

Uranium industry annual 1994  

SciTech Connect

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

NONE

1995-07-05T23:59:59.000Z

97

Dan Miller Associate, Industrial and Economic Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Name, Phone, e-mail address Name, Phone, e-mail address Dan Miller Associate, Industrial and Economic Development Dan Miller joined Oak Ridge National Laboratory in January, 2010 as an Associate in Industrial Partnerships and Economic Development. His responsibilities include leading and supporting initiatives in the energy storage portfolio focused on technology commercialization, economic development, and industrial partnerships. He also manages ORNL's relationships with companies involved in the Oak Ridge Science & Technology Park and is actively recruiting additional companies to locate there. Prior to joining ORNL, Dan was a Licensing Associate in Rice University Office of Technology Transfer, where he managed the patent portfolio of the university's physical science technologies.

98

U-157: Ruby Mail Gem Directory Traversal and Shell Command Injection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

57: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities U-157: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities April 27,...

99

T-618: Debian update for exim4: Mail Transport Agent | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

mail transport agent in Debian, uses DKIM data obtain from DNS directly in a format string, potentially allowing malicious mail senders to execute arbitrary code. reference...

100

2010 - Federal Viewpoint Survey Reports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2010 Federal Employee Viewpoint Survey Trend Report Responsible Contacts N. Tony Nguyen PROGRAM ANALYST E-mail tony.nguyen@hq.doe.gov Phone 202-586-4533 More Documents &...

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

2009 - Federal Viewpoint Survey Reports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report 2009 Annual Employee Survey Trend Report Responsible Contacts N. Tony Nguyen PROGRAM ANALYST E-mail tony.nguyen@hq.doe.gov Phone 202-586-4533 More Documents &...

102

2012 - Federal Viewpoint Survey Reports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Viewpoint Survey Results: Agency Management Report Responsible Contacts N. Tony Nguyen PROGRAM ANALYST E-mail tony.nguyen@hq.doe.gov Phone 202-586-4533 More Documents &...

103

Report Period: EIA ID NUMBER: Appendix A: Mailing Address: Appendix B:  

U.S. Energy Information Administration (EIA) Indexed Site

Report Period: Report Period: EIA ID NUMBER: Appendix A: Mailing Address: Appendix B: Zip Code - Secure File Transfer option available at: - - - - Email form to: OOG.SURVEYS@eia.doe.gov Fax form to: (202) 586-9772 Email address: Oil & Gas Survey U.S. Department of Energy Ben Franklin Station PO Box 279 Washington, DC 20044-0279 Questions? Call toll free: 1-800-638-8812 1. Total Acquisitions (Enter the total volume of foreign crude oil acquired during the report month for importation into the United States. This is the sum of column (l), Part III, excluding resubmission.) 2. Offshore Inventories (Enter the total volume of foreign oil owned by the firm, for eventual importation into the United States which is held in storage outside the United States and/or is enroute to the United States as of the

104

Table Commercial Industrial Vehicle Fuel Electric Power  

U.S. Energy Information Administration (EIA)

State Residential Commercial Industrial Vehicle Fuel Electric Power ... Form EIA?886, Annual Survey of Alternative Fueled Vehicles; ...

105

Boost Process Heating Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

Science Conference Proceedings (OSTI)

This fact sheet describes how the Industrial Technologies Program Process Heating Assessment and Survey Tool (PHAST) can help industrial plants indentify opportunities to save energy.

Not Available

2008-12-01T23:59:59.000Z

106

Minutes from the January 19, 2011 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 2010 January 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide FY-2010 Three-Year Plan Dallas Woodruff, Headquarters in formed the group that the Department-wide Printing and Publishing Activities is currently in the concurrence process. The report is due to congress by February 11, 2011. Mr. Woodruff thanks those that assisted in development of the report and he asked for recommendations on how to make the data submission more users friendly. Mr Woodruff also asked members to share any concern or problems they experienced regarding to using the Excel

107

Minutes from the March 17, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 17, 2010 March 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-eight individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming Congressional Joint Committee on Printing Commercial Printing Report "JCP Form No. 2" Dallas Woodruff, Headquarters informed the group that sites should receive the call letter for the report on or around March 30, 2010. The report is due back to Headquarters by May 3, 2009. Mr. Woodruff reminded the group that they must report negative responses as well.

108

Minutes from the November 17, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 17, 2010 November 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty seven individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide "Three-Year Plan" Dallas Woodruff, Headquarters opened the meeting by thanking everyone for providing their sites Three-Year Plan data to Headquarters in timely manner. Mr. Woodruff went on to say a number of individuals indentified a problem with the narrative section of the PPAFI Spreadsheets (unable to print the narratives). Mr. Woodruff notified the programmer of the narrative section printing glitch.

109

Mailing Addresses and Information Numbers for Operations, Field, and Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

About Energy.gov » Mailing Addresses and Information Numbers for About Energy.gov » Mailing Addresses and Information Numbers for Operations, Field, and Site Offices Mailing Addresses and Information Numbers for Operations, Field, and Site Offices Name Telephone Number U.S. Department of Energy Ames Site Office 111 TASF, Iowa State University Ames, Iowa 50011 515-294-9557 U.S. Department of Energy Argonne Site Office 9800 S. Cass Avenue Argonne, IL 60439 630-252-2000 U.S. Department of Energy Berkeley Site Office Berkeley National Laboratory 1 Cyclotron Road Berkeley, CA 94720 510-486-5784 U.S. Department of Energy Bonneville Power Administration P.O. Box 3621 905 NE 11th Avenue Portland, OR 97232 Bonneville Power Administration General and Regional Offices 503-230-3000 U.S. Department of Energy Brookhaven Site Office Upton, NY 11973 631-344-5050

110

Mailing Addresses for National Laboratories and Technology Centers |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mailing Addresses for National Laboratories and Mailing Addresses for National Laboratories and Technology Centers Mailing Addresses for National Laboratories and Technology Centers Name Telephone Number U.S. Department of Energy Albany Research Center 1450 Queen Ave. SW Albany, OR 97321-2198 541-967-5892 U.S. Department of Energy Ames Laboratory #311 TASF, Iowa State University Ames, Iowa 50011 515-294-2680 U.S. Department of Energy Argonne National Laboratory (East) 9700 S. Cass Avenue Argonne, IL 60439 630-252-2000 U.S. Department of Energy Argonne National Laboratory (West) P.O. Box 2528 Idaho Fall, ID 83403-2528 208-533-7341 U.S. Department of Energy Bettis Atomic Power Laboratory, Bechtel Bettis, Inc. 814 Pittsburgh McKeesport Boulevard West Mifflin, PA 15122-0079 412-476-5000 U.S. Department of Energy

111

Minutes from the January 20, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the Department-wide Printing and Publishing Activities Report Three-Year Plan. Dallas Woodruff, Headquarters thanked the group for their contributions made to the Department-wide printing program during FY 2009. Mr Woodruff also thanked the group for providing data for the FY 2009 Three-Year Plan in a timely manner. The Three-Year Plan is in track for completion before the February

112

1981 Active-Solar-Installations Survey  

SciTech Connect

The survey gathered data on active residential and commercial solar systems installed during calendar year 1981 and a listing of firms involved in various aspects of the industry. The mail and telephone followup survey results are presented in 21 tables for combined national and state data. The total number of installations reported nationwide during 1981 was 122,907. Almost 95% of all reported installations were made in the single-family residential sector. The fewest quantity of installations (1.2%) was reported in the commercial sector. The remaining 4% was reported in the multifamily residential sector. Water heaters represented the largest number of systems installed in single-family, multifamily, and commercial buildings. The average size of water-heating systems in single-family homes was 61 square feet with an average cost of $3,235. Pool heaters represented the second largest number of systems installed in single-family and multifamily homes and represented 16.4% of the total installations. The average size of pool heaters in single-family homes was 376 square feet with an average cost of $3,455.

1982-12-01T23:59:59.000Z

113

LiveMail: personalized avatars for mobile entertainment  

Science Conference Proceedings (OSTI)

LiveMail is a prototype system that allows mobile subscribers to communicate using personalized 3D face models created from images taken by their phone cameras. The user takes a snapshot of someone's face - a friend, famous person, themselves, even a ...

Miran Mosmondor; Tomislav Kosutic; Igor S. Pandzic

2005-06-01T23:59:59.000Z

114

HEART SMART NUTRITION Mailout or E-mail Lesson Series  

E-Print Network (OSTI)

HEART SMART NUTRITION Mailout or E-mail Lesson Series MEMORANDUM TO : County Extension Agents Fellow, Professor and Extension Nutrition Specialist SUBJECT: Lesson Series Heart Smart Nutrition Heart. A county-wide Heart Smart seminar would also be another opportunity to sign up participants for the series

115

Photovoltaic battery & charge controller market & applications survey. An evaluation of the photovoltaic system market for 1995  

DOE Green Energy (OSTI)

Under the sponsorship of the Department of Energy, Office of Utility Technologies, the Battery Analysis and Evaluation Department and the Photovoltaic System Assistance Center of Sandia National Laboratories (SNL) initiated a U.S. industry-wide PV Energy Storage System Survey. Arizona State University (ASU) was contracted by SNL in June 1995 to conduct the survey. The survey included three separate segments tailored to: (a) PV system integrators, (b) battery manufacturers, and (c) PV charge controller manufacturers. The overall purpose of the survey was to: (a) quantify the market for batteries shipped with (or for) PV systems in 1995, (b) quantify the PV market segments by battery type and application for PV batteries, (c) characterize and quantify the charge controllers used in PV systems, (d) characterize the operating environment for energy storage components in PV systems, and (e) estimate the PV battery market for the year 2000. All three segments of the survey were mailed in January 1996. This report discusses the purpose, methodology, results, and conclusions of the survey.

Hammond, R.L.; Turpin, J.F.; Corey, G.P. [and others] [and others

1996-12-01T23:59:59.000Z

116

Poultry Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. poultry industry and ways in which electric-powered processes and technologies can be used in poultry and egg production and processing. The poultry industry, which consists of poultry production for meat as well as egg production and processing, is one of the fastest growing segments of the U.S. food manufacturing industry. It is also an energy-intensive industry. In fact, a 2010 report by the USDA illustrates ...

2011-03-30T23:59:59.000Z

117

You are where you e-mail: using e-mail data to estimate international migration rates  

Science Conference Proceedings (OSTI)

International migration is one of the major determinants of demographic change. Although efforts to produce comparable statistics are underway, estimates of demographic flows are inexistent, outdated, or largely inconsistent, for most countries. We estimate ... Keywords: demographics, e-mail data, migration, mobility

Emilio Zagheni; Ingmar Weber

2012-06-01T23:59:59.000Z

118

Industrial demand-side management programs: What`s happened, what works, what`s needed  

Science Conference Proceedings (OSTI)

In order to analyze experience to date with industrial demand-side management (DSM), a survey of utilities was conducted and a database of industrial DSM programs was prepared. More than eighty utilities and third-party organizations were interviewed. Data were collected via phone, fax, and/or mail from the utilities and entered into a database. In order to limit the scope of this study, the database contains incentive-based, energy-saving programs and not load management or information-only programs (including technical assistance programs). Programs in the database were divided into four categories: two ``prescriptive rebate`` categories and two ``custom rebate`` categories. The database contains 31 incentive-based, energy-saving industrial DSM programs offered by 17 utilities. The appendix to this report summarizes the results approximately 60 industrial DSM programs. Most of the programs included in the appendix, but not in the database, are either C&I programs for which commercial and industrial data were not disaggregated or new industrial DSM programs for which data are not yet available.

Jordan, J.A.; Nadel, S.M. [American Council for an Energy-Efficient Economy, Washington, DC (United States)

1993-03-01T23:59:59.000Z

119

Alternative Fuels Data Center: Biomass and Biofuels Industry Development  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Biomass and Biofuels Biomass and Biofuels Industry Development to someone by E-mail Share Alternative Fuels Data Center: Biomass and Biofuels Industry Development on Facebook Tweet about Alternative Fuels Data Center: Biomass and Biofuels Industry Development on Twitter Bookmark Alternative Fuels Data Center: Biomass and Biofuels Industry Development on Google Bookmark Alternative Fuels Data Center: Biomass and Biofuels Industry Development on Delicious Rank Alternative Fuels Data Center: Biomass and Biofuels Industry Development on Digg Find More places to share Alternative Fuels Data Center: Biomass and Biofuels Industry Development on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Biomass and Biofuels Industry Development

120

The Future of Electric Vehicles and Arizona State University's MAIL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Future of Electric Vehicles and Arizona State University's The Future of Electric Vehicles and Arizona State University's MAIL Battery The Future of Electric Vehicles and Arizona State University's MAIL Battery August 11, 2010 - 4:26pm Addthis Cody Friesen and his team at Arizona State University | Photo Credit Arizona State University Cody Friesen and his team at Arizona State University | Photo Credit Arizona State University Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs What does this mean for me? EV batteries will have the ability to recharge at least 1000 times at a low cost due to its composition of only domestically-sourced, earth abundant material Electric Vehicles are becoming a reality. Last month, the President got behind the wheel of a Chevy Volt in Michigan, and traveled to Smith

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Minutes from the March 14, 2013 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 14, 2013 March 14, 2013 Mail discussion Al Majors is on leave today. Ellsworth Howell Jr. and Tony Nellums are sitting for Al. There are no agenda items for the Mail portion. A discussion period for questions, comments, or suggestions was opened without response Printing discussion Discussed suggestions for reducing printing expenses Presidential Executive Order 13589 and reducing hard copy printing in favor of electronic publishing Sec. 5. Printing. Agencies are encouraged to limit the publication and printing of hard copy documents and to presume that information should be provided in an electronic form, whenever practicable, permitted by law, and consistent with applicable records retention requirements. Agencies should consider using acquisition vehicles developed by the

122

Via E-Mail Michael Li Electricity Policy Specialist U.S. Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 1, 2010 November 1, 2010 Via E-Mail Michael Li Electricity Policy Specialist U.S. Department of Energy Office of Electricity Delivery and Energy Reliability 1000 Independence Avenue, SW Washington, DC 20585 smartgridpolicy@hq.doe.gov Re: Smart Grid RFI: Addressing Policy And Logistical Challenges Dear Mr. Li: On behalf of the Association of Home Appliance Manufacturers (AHAM), I would like to provide our comments on the Smart Grid RFI: Addressing Policy and Logistical Challenges, 75 Fed. Reg. 57,006 (Sept. 17, 2010). The Association of Home Appliance Manufacturers (AHAM) represents manufacturers of major, portable and floor care home appliances, and suppliers to the industry. AHAM's membership includes over 150 companies throughout the world. In the U.S., AHAM members employ tens

123

By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Room 6A245 Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: Regulatory Burden RFI Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on its Request for Information on reducing regulatory burden, 76 Fed. Reg. 6123 (Feb. 3, 2011). AHAM represents manufacturers of major, portable and floor care home appliances, and suppliers to the industry. AHAM's more than 150 members employ tens of thousands of people in the U.S. and produce more than 95% of the household appliances shipped for sale within the

124

By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 1, 2011 August 1, 2011 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Room 6A245 Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: EO 13563 Preliminary Plan Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on preliminary plan for retrospective analysis of existing rules, 76 Fed. Reg. 40646 (July 11, 2011). AHAM represents manufacturers of major, portable and floor care home appliances, and suppliers to the industry. AHAM's more than 150 members employ tens of thousands of people in the U.S. and produce more than 95% of the household appliances shipped for sale within the

125

By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 19, 2012 June 19, 2012 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: Regulatory Burden RFI Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on its Regulatory Burden RFI, 77 Fed. Reg. 28518 (May 15, 2012). AHAM represents manufacturers of major, portable and floor care home appliances, and suppliers to the industry. AHAM's more than 150 members employ tens of thousands of people in the U.S. and produce more than 95% of the household appliances shipped for sale within the

126

Uranium industry annual 1995  

SciTech Connect

The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

NONE

1996-05-01T23:59:59.000Z

127

V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis...

128

The Potential For Miscommunication Using E-Mail As A Source Of Communication  

Science Conference Proceedings (OSTI)

The purpose of this study is to explore inherent characteristics and functional uses of electronic mail (e-mail) that may create the possibility of miscommunication and an impoverished medium for conducting successful personal/social interactions.

Vicki P. Rainey

2000-12-01T23:59:59.000Z

129

Figure 2. Energy Consumption of Vehicles, Selected Survey Years  

U.S. Energy Information Administration (EIA) Indexed Site

Home > Households, Buildings & Industry >Transportation Surveys > Household Vehicles Energy Use > Figure 2 Figure 2. Energy Consumption of Vehicles, Selected Survey Years...

130

Formaldehyde-exposure characterization in garment-manufacturing plants: a composite summary of three in-depth industrial-hygiene surveys  

SciTech Connect

The extent of exposure to formaldehyde was investigated at three garment manufacturing facilities using fabrics pretreated with a formaldehyde-based resin system. Two of the facilities (in Georgia) operated on a two-shift basis with approximately 1000 and 500 workers; one facility (in Pennsylvania) operated on a one-shift basis and had approximately 600 workers. The facilities cut and sewed men's dress shirts from treated fabric. Measured exposures to formaldehyde, respirable dust, and organic cleaning solvent vapors were all below the applicable American Conference of Governmental Industrial Hygienists Threshold Limit Values and Occupational Safety and Health Administration Permissible Exposure Limits.

Elliott, L.J.; Stayner, L.T.; Blade, L.M.; Halperin, W.; Keenlyside, R.

1987-01-01T23:59:59.000Z

131

NIST SP 800-45 Version 2, Guidelines on Electronic Mail ...  

Science Conference Proceedings (OSTI)

Page 1. Special Publication 800-45 Version 2 Guidelines on Electronic Mail Security Recommendations of the National Institute of ...

2012-02-06T23:59:59.000Z

132

Unsolicited Commercial E-Mail: Empirical Analysis of a Digital Commons  

Science Conference Proceedings (OSTI)

Unsolicited commercial e-mail (UCE) is a significant problem of the digital commons, but there has been little empirical analysis of proposed solutions and underlying mechanisms. This study, based on an analysis of 47 million inbound e-mail messages ... Keywords: Attention Endowment, Box-Jenkins, Common-Pool Resource, Digital Commons, E-Mail Marketing, Exclusion, Is Management, Rival, Spam, Time Series, Unsolicited Commercial E-Mail

Nigel Melville; Aaron Stevens; Robert Plice; Oleg Pavlov

2006-06-01T23:59:59.000Z

133

Survey report: study of information/educational discussions with private industries and public institutions on the direct-heat utilization of geothermal energy  

DOE Green Energy (OSTI)

Results of a study of private and public institutions' responses to the proposed use of geothermal energy in the form of direct heat are summarized. This heat energy would be used as an alternate or supportive source for their process or other heat requirements. The summary includes information from over 75 personal contacts with firms in several categories. No attempt is made to reference specific data to any particular company. Although not necessarily confidential, some financial information concerning energy costs to profits was considered sensitive and is respected as such. The companies contacted are in the following categories: food processing--canning, drying, dehydration; chemicals; paper/wood-pulp processing; food machinery; horticulture; and dairy. The area covered in the study was from Seattle, Washington, to San Diego, California, during mid-1976. Industry's response varied from mild interest, as with corporations that had little or no knowledge of geothermal energy (and regard it as a new unproven science), to enthusiasm from corporations that employ their own energy departments. The study clearly indicated the need for a basic educational/promotional program and an operating demonstration project (industrial park) to prove economic feasibility and instill confidence in the potential of geothermal energy.

Davey, J.V.

1977-03-01T23:59:59.000Z

134

Telling the story of older people e-mailing: An ethnographical study  

Science Conference Proceedings (OSTI)

While e-mail is the Internet application most used by older people, very little is known about how they interact with e-mail systems and use them in their daily lives. We undertook a 3-year ethnographical study aimed at revealing and explaining real ... Keywords: Accessibility barriers, E-mail, Ethnography, Interactive experiences, Older people, Real life use

Sergio Sayago; Josep Blat

2010-01-01T23:59:59.000Z

135

Coal Survey Frequently Asked Questions  

U.S. Energy Information Administration (EIA) Indexed Site

Survey FAQ Survey FAQ Available FAQ: Q. Whom do I contact if I need assistance completing a survey form? Q. Whom do I contact if I require assistance with the registration process, log-in process, instructions pertaining to JavaScript or cookies? Q. What unit of measurement should be used to calculate Btu? Q. How do I update the information that appears under Item I on IDC? Q. Under "Item II: Coal Receipts, Consumption and Stocks," can a value be negative? Q. How do I convert between short tons and metric tons? Vice Versa. Q. How do I convert between pounds to short tons? Vice Versa. Q. How do I correct a mistake on the Survey Form once I have submitted the data? Q. How do I log in if forgot my password? Q. If I accidently deleted the registration letters, how can I get my Mail ID and Code?

136

Dairy Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. dairy industry and ways in which electric-powered processes and technologies can be used in milk production and processing. Because of the different processes involved, the characteristics of energy consumption at milk production and processing facilities vary by facility. Most energy used in milk production is in the form of diesel fuel, followed by electricity and then by petroleum products such as gasoline an...

2011-03-30T23:59:59.000Z

137

Minutes from the February 23, 2012 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Printing and Mail Managers Exchange Forum Teleconference February 23, 2012 Participants: Headquarters (5) National Energy Technology Laboratory, PA National Security Complex Y-12 (2) Oak Ridge National Laboratory Y-12 Site Office (2) Hanford Site Office Oak Ridge Association University Oak Ridge Operations Office BWXT Pantex Site Office JanTec Corporation, Richland, Washington Los Alamos National Laboratory Chicago Office Bettis Atomic Power Laboratory National Security Technology C1, Las Vegas SLAC National Accelerator Laboratory Comments/Additions to minutes from last meeting. There were no comments. Printing Agenda Items......... Update on the Department-wide Printing and Publishing Activities Three-Year Plan (2013-2015).

138

T.: Numerical sequence extraction in handwritten incoming mail documents  

E-Print Network (OSTI)

In this communication, we propose a method for the automatic extraction of numerical fields in handwritten documents. The approach exploits the known syntactic structure of the numerical field to extract, combined with a set of contextual morphological features to find the best label to each connected component. Applying an HMM based syntactic analyzer on the overall document allows to localize/extract fields of interest. Reported results on the extraction of zip codes, phone numbers and customer codes from handwritten incoming mail documents demonstrate the interest of the proposed approach. 1.

G. Koch; L. Heutte; T. Paquet

2003-01-01T23:59:59.000Z

139

Carbon Emissions: Food Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Food Industry Food Industry Carbon Emissions in the Food Industry The Industry at a Glance, 1994 (SIC Code: 20) Total Energy-Related Emissions: 24.4 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 6.6% Total First Use of Energy: 1,193 trillion Btu -- Pct. of All Manufacturers: 5.5% Carbon Intensity: 20.44 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 24.4 Net Electricity 9.8 Natural Gas 9.1 Coal 4.2 All Other Sources 1.3 Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998

140

Export.gov - By Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

By Industry By Industry Print | E-mail Page Export Information By Industry Export.gov offers a wide range of current industry and trade information to help exporters of U.S goods and services find the information they need to compete successfully in overseas markets. Four Essential Resources 1. Export Assistance. The U.S. & Foreign Commercial Service is the trade promotion arm of the U.S. Department of Commerce's International Trade Administration. Commercial Service trade professionals in more than100 U.S. cities and in nearly 80 countries help U.S. companies to start exporting or increase sales to new global markets. Commercial Service services include: Market Intelligence , Trade Counseling , Business Matchmaking, and more. 2. Trade Data & Analysis. Trade data can help companies identify the best

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Business Innovation Programs Agribusiness Supply Chain Survey  

E-Print Network (OSTI)

Business Innovation Programs Agribusiness Supply Chain Survey Industrial Energy Efficiency Healthy LAFAYETTE, Ind. - An industry's supply chain is only as strong as its weakest link. For the agribusiness Workforce Green Worker Certification Nanotechnology Transfer Energy Systems Network Innovations Link #12

142

EIA Energy Efficiency-Table 4f. Industrial Production Indexes...  

Annual Energy Outlook 2012 (EIA)

f Page Last Modified: May 2010 Table 4f. Industrial Production Indexes by Selected Industries, 1998, 2002, and 2006 (2000 100) MECS Survey Years NAICS Subsector and Industry 1998...

143

U-157: Ruby Mail Gem Directory Traversal and Shell Command Injection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

57: Ruby Mail Gem Directory Traversal and Shell Command 57: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities U-157: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities April 27, 2012 - 7:00am Addthis PROBLEM: Ruby Mail Gem Directory Traversal and Shell Command Injection Vulnerabilities PLATFORM: Mail gem for Ruby 2.x ABSTRACT: Some vulnerabilities have been reported in the Mail gem for Ruby, which can be exploited by malicious people to manipulate certain data and compromise a vulnerable system. Reference Links: Secunia Advisory SA48970 CVE-2012-2139 CVE-2012-2140 IMPACT ASSESSMENT: Medium Discussion: Input passed via the "to" parameter within the file delivery method is not properly verified before being used and can be exploited to modify arbitrary files via directory traversal attacks. Certain input passed to

144

Carbon Emissions: Chemicals Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Chemicals Industry Chemicals Industry Carbon Emissions in the Chemicals Industry The Industry at a Glance, 1994 (SIC Code: 28) Total Energy-Related Emissions: 78.3 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 21.1% -- Nonfuel Emissions: 12.0 MMTC Total First Use of Energy: 5,328 trillion Btu -- Pct. of All Manufacturers: 24.6% Energy Sources Used As Feedstocks: 2,297 trillion Btu -- LPG: 1,365 trillion Btu -- Natural Gas: 674 trillion Btu Carbon Intensity: 14.70 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 78.3 Natural Gas 32.1

145

Carbon Emissions: Paper Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Paper Industry Paper Industry Carbon Emissions in the Paper Industry The Industry at a Glance, 1994 (SIC Code: 26) Total Energy-Related Emissions: 31.6 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 8.5% Total First Use of Energy: 2,665 trillion Btu -- Pct. of All Manufacturers: 12.3% -- Pct. Renewable Energy: 47.7% Carbon Intensity: 11.88 MMTC per quadrillion Btu Renewable Energy Sources (no net emissions): -- Pulping liquor: 882 trillion Btu -- Wood chips and bark: 389 trillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 31.6 Net Electricity 11.0

146

COMPUTER-AIDED TRANSLATION AN INDUSTRY SURVEY  

E-Print Network (OSTI)

u s i n e s s School, this report is essential to anyone in the translation field. The report. ii·.·:··~i / / "An exceptionally important and original publication not merely for English but lin- ·: ' Gv :i:iii?i:iii ~:!;:::guistics and science as well." - Neoterm. iiii!i~i:~i Over 1/4 million

147

The EMA system: a CTI based e-mail alerting service  

Science Conference Proceedings (OSTI)

The integration of Internet services and telephony services is a new area for the development of telecommunications services. One example is an e-mail alerting service that uses the telephony network for e-mail notification. The EMA system is a computer ...

D. Frank; H. Lucic; M. Opsenica; L. Puksec; M. Zic; S. Brajkovic; V. Maricic

2000-02-01T23:59:59.000Z

148

Survey Expectations  

E-Print Network (OSTI)

of Michigan and is known as the Michigan survey, with many other similar surveys conducted across OECD countries so as to provide up to date information on consumer expectations. Questions on expectations are also sometimes included in panel surveys... be formed, do of course make it possible to assess whether, or how far, such expectations are well-founded by comparing the experiences of individual households with their prior expectations. A key aspect of the Michigan survey, and of many other more recent...

Pesaran, M Hashem; Weale, Martin

2006-03-14T23:59:59.000Z

149

Industrial Applications  

Science Conference Proceedings (OSTI)

Table 2   Frequently used rubber linings in other industries...Application Lining Power industry Scrubber towers Blended chlorobutyl Limestone slurry tanks Blended chlorobutyl Slurry piping Blended chlorobutyl 60 Shore A hardness natural rubber Seawater cooling water

150

Industries Affected  

Science Conference Proceedings (OSTI)

Table 2   Industries affected by microbiologically influenced corrosion...generation: nuclear, hydro, fossil fuel,

151

REGULATING HAWAII'S PETROLEUM INDUSTRY  

E-Print Network (OSTI)

This study was prepared in response to House Resolution No. 174, H.D. 2, which was adopted during the Regular Session of 1995. The Resolution requested the Legislative Reference Bureau to conduct a study to obtain the views of selected state agencies and representatives of Hawaii's petroleum industry in order to assist the Legislature in formulating policies that protect the interests of Hawaii's gasoline consumers. The Resolution sought information and the views of survey participants on a broad range of proposals to regulate Hawaii's petroleum industry. This study reviews each of these proposals in terms of their value to consumers, and explores both regulatory policy options and alternatives to regulation available to state lawmakers. The Bureau extends its sincere appreciation to all those whose participation and cooperation made this study possible. A list of contact persons, including the names of survey participants and others who helped to contribute to this study, is contained in Appendix B.

Mark J. Rosen; Wendell K. Kimura

1995-01-01T23:59:59.000Z

152

Survey Statisticians  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Statisticians Survey Statisticians The U.S.Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the Survey Statistician, who measures the amounts of energy produced and consumed in the United States. Responsibilities: Survey Statisticians perform or participate in one or more of the following important functions: * Design energy surveys by writing questions, creating layouts and testing questions for clarity and accuracy. * Conduct energy surveys to include sending out and tracking survey responses, editing and analyzing data submis- sions and communicating with respondents to verify data.

153

Rebecca Peterson VIA U.S. Mail and E-mail: U.S. Department of Energy ERS2014@eia.gov  

Gasoline and Diesel Fuel Update (EIA)

May 6, 2013 May 6, 2013 Rebecca Peterson VIA U.S. Mail and E-mail: U.S. Department of Energy ERS2014@eia.gov U.S. Energy Information Administration Rebecca.Patterson@eia.doe.gov Mail Stop EI-23, Forrestal Building 1000 Independence Avenue SW Washington, D.C. 20585 Re: Comments on Form EIA-930 Dear Ms. Peterson: Alaska Electric Light and Power (AEL&P), the electric utility serving Juneau, Alaska, offers these comments on the proposed implementation of Form EIA-930 "Balancing Authority Operations Report." (a) whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility. AEL&P is a small, electrically isolated utility. AEL&P generates,

154

Magma Source Location Survey  

DOE Green Energy (OSTI)

A survey of Industry/University geophysicists was conducted to obtain their opinions on the existence of shallow (less than 10 km from surface) magma bodies in the western conterminous United States and methods for locating and defining them. Inputs from 35 individuals were received and are included. Responses were that shallow magma bodies exist and that existing geophysical sensing systems are adequate to locate them.

Hardee, H.C.; Dunn, J.C.; Colp, J.L.

1982-03-01T23:59:59.000Z

155

Market analysis of the solar energy industry  

SciTech Connect

This report describes the results of a survey of companies in the solar energy industry. The general objective of the survey was to provide information to help evaluate the effectiveness of technology transfer mechanisms for the development of the solar industry. The specific objectives of the survey included: (1) determination of the needs of the solar industry; (2) identification of special concerns of the solar industry; and (3) determination of the types of technology transfer mechanisms that would be most helpful to the solar industry in addressing these needs and concerns. The major focus was on technical problems and developments, but institutional and marketing considerations were also treated. The majority of the sample was devoted to the solar heating and cooling (SHAC) component of the industry. However, a small number of photovoltaic (PV), wind, and power generation system manufacturers were also surveyed. Part I discusses the methodology used in the selection, performance, and data reduction stages of the survey, comments on the nature of the responses, and describes the conclusions drawn from the survey. The latter include both general conclusions concerning the entire solar industry, and specific conclusions concerning component groups, such as manufacturers, architects, installers, or dealers. Part II consists of tabulated responses and non-attributed verbatim comments that summarize and illustrate the survey results.

1979-08-01T23:59:59.000Z

156

Industrial Retrofits are Possible  

E-Print Network (OSTI)

Ontario is the industrial heartland of Canada and more than 80% of its energy comes from Canadian sources with the remainder from the neighbouring U.S. states. Because of the ever increasing demand for energy relating to increased economic activity, the provincial government's major energy priority is efficiency. In April of 1987, the provincial government initiated a program to assist industrial energy users to reduce their energy usage. This program was designed to concentrate on an in-depth analysis of the complete operations of industrial plants with the analyses being performed by specialist, private sector, engineering consultants. The program is in 3 phases providing an Ontario industrial plant with an Energy Analysis, a Feasibility Analysis Grant and a Project Engineering Design Grant. In this presentation, the author will outline the results of the program to date and will attempt to share with the audience the individual case experiences. Since the program's start, the Ontario Ministry of Energy has completed over 320 energy analyses of industrial plants which had combined energy bills of over $420 million. The potential annual energy savings identified were over $40 million or 9.51%. Electricity and natural gas are the major fuels used by Ontario industries and our surveys to date have shown savings of 6% in electricity and 11% in natural gas. Over the first two years of the program, individual plants have or are intending to implement more than half of the energy analysis recommendations.

Stobart, E. W.

1990-06-01T23:59:59.000Z

157

AERIAL RADIOLOGICAL SURVEYS  

SciTech Connect

Measuring terrestrial gamma radiation from airborne platforms has proved to be a useful method for characterizing radiation levels over large areas. Over 300 aerial radiological surveys have been carried out over the past 25 years including U.S. Department of Energy (DOE) sites, commercial nuclear power plants, Formerly Utilized Sites Remedial Action Program/Uranium Mine Tailing Remedial Action Program (FUSRAP/UMTRAP) sites, nuclear weapons test sites, contaminated industrial areas, and nuclear accident sites. This paper describes the aerial measurement technology currently in use by the Remote Sensing Laboratory (RSL) for routine environmental surveys and emergency response activities. Equipment, data-collection and -analysis methods, and examples of survey results are described.

Proctor, A.E.

1997-06-09T23:59:59.000Z

158

Digital Surveying Directional Surveying Specialists | Open Energy  

Open Energy Info (EERE)

Digital Surveying Directional Surveying Specialists Digital Surveying Directional Surveying Specialists Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Digital Surveying Directional Surveying Specialists Author Directional Surveying Specialists Published Publisher Not Provided, 2012 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Digital Surveying Directional Surveying Specialists Citation Directional Surveying Specialists. Digital Surveying Directional Surveying Specialists [Internet]. 2012. [cited 2013/10/08]. Available from: http://www.digitalsurveying.co.za/services/geophysical-borehole-surveying/overview/optical-televiewer/ Retrieved from "http://en.openei.org/w/index.php?title=Digital_Surveying_Directional_Surveying_Specialists&oldid=690244"

159

Oklahoma Industrial Energy Management Program  

E-Print Network (OSTI)

The need for sound energy management is no longer worthy of debate. Action is necessary and much is being done by U.S. industry. Unfortunately, however, the majority of the work is being done by the few large energy intensive industries throughout the country. The average small to medium sized company has yet to undertake a dedicated program. The reasons are numerous, but often it is simply because of a lack of knowledge of techniques or the amount of savings possible. Recognizing this, the Oklahoma Department of Energy designed a program to acquaint Oklahoma industry with the potential savings available through energy management and some basic techniques. The program is entitled "Oklahoma Industrial Energy Management Program" and is housed at Oklahoma State University. The program is funded by the U. S. Department of Energy through the State Energy Conservation Plan. This paper describes the program offerings, impact to date and plans for the future. The program offerings basically include: 1. A series of tuition free Industrial Energy Management Conferences (over 20 given to date involving many Oklahoma industries). 2. A free energy newsletter entitled "Energy Channel" mailed to all participating Oklahoma industries. 3. A series of Energy Audit booklets including instructions and forms. 4. Technical aid on a limited basis. 5. A series of laboratory type experiments involving power factor, solar energy, boiler combustion improvement and other energy related projects. 6. Fact sheet publication as the need develops. Plans for the future include expansion of the program to small businesses in general through the Energy Extension Service and more technical aid to participating industries, The basic plan involving the services above shall remain intact. The program has been very successful to date. The results are directly transferable to other states and the program directors are willing to share information.

Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

1979-01-01T23:59:59.000Z

160

Industry @ ALS  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry @ ALS Industry @ ALS Industry @ ALS Concrete Industry Benefits from Ancient Romans and the ALS Print Thursday, 17 October 2013 14:24 New insights into the Romans' ingenious concrete harbor structures emerging from ALS beamline research could move the modern concrete industry toward its goal of a reduced carbon footprint. Summary Slide Read more... Moving Industry Forward: Finding the Environmental Opportunity in Biochar Print Thursday, 12 September 2013 08:41 Using ALS Beamlines 10.3.2 and 8.3.2, the Environmental Protection Agency (EPA) is currently investigating how biochar sorbs environmental toxins and which kinds of biochar are the most effective. The possibilities for widespread use have already launched entrepreneurial commercial ventures. Summary Slide

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

SCO Survey  

Science Conference Proceedings (OSTI)

Survey on Future of NIST's Standards Information Services. June 5, 2013. *. Bookmark and Share. Contact: Clare Allocca 301-975-4359. ...

2013-06-05T23:59:59.000Z

162

Guidelines for Estimating Unmetered Industrial Water Use  

SciTech Connect

The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

Boyd, Brian K.

2010-08-01T23:59:59.000Z

163

V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java 7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis PROBLEM: A vulnerability was reported in IBM Lotus Notes PLATFORM: IBM Notes 8.0.x, 8.5.x, 9.0 ABSTRACT: A remote user can cause Java applets to be executed on the target user's system REFERENCE LINKS: Security Tracker Alert ID 1028504 IBM Security Bulletin 1633819 CVE-2013-0127 CVE-2013-0538 IMPACT ASSESSMENT: Medium DISCUSSION: The mail client does not filter 'applet' and 'javascript' tags in HTML-based email messages. A remote user can send a specially crafted email message that, when loaded by the target user, will execute arbitrary Java code on the target system. The code will run with the privileges of the

164

V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java 7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis PROBLEM: A vulnerability was reported in IBM Lotus Notes PLATFORM: IBM Notes 8.0.x, 8.5.x, 9.0 ABSTRACT: A remote user can cause Java applets to be executed on the target user's system REFERENCE LINKS: Security Tracker Alert ID 1028504 IBM Security Bulletin 1633819 CVE-2013-0127 CVE-2013-0538 IMPACT ASSESSMENT: Medium DISCUSSION: The mail client does not filter 'applet' and 'javascript' tags in HTML-based email messages. A remote user can send a specially crafted email message that, when loaded by the target user, will execute arbitrary Java code on the target system. The code will run with the privileges of the

165

emergency.pppl.gov Join Our Mailing List A Collaborative National Center for Fusion & Plasma Research  

E-Print Network (OSTI)

emergency.pppl.gov Join Our Mailing List A Collaborative National Center for Fusion & Plasma Research Search News Room News Archive American Fusion News Press Releases Publications Princeton Journal

166

E-Mail Client and Mobile Device Configuration Changes for Exchange...  

NLE Websites -- All DOE Office Websites (Extended Search)

coming in When notification is received, restart Outlook. Outlook 2010, cached mode disabled 14.0.6112.5000 Connection lost; cannot log in to view existing mail Reopen Outlook....

167

This form may be submitted to the EIA by mail, fax, e-mail, or secure file trans  

U.S. Energy Information Administration (EIA) Indexed Site

5.5 or later or Netscape 4.77 or later. Send your surveys using this secure method at: https://signon.eia.doe.gov/upload/noticeoog.jsp" 5.5 or later or Netscape 4.77 or later. Send your surveys using this secure method at: https://signon.eia.doe.gov/upload/noticeoog.jsp" ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"OMB No. 1905-0174" ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Expiration Date: 12/31/2015" ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Version No.: 2013.01" "FORM EIA-782A" "REFINERS'/GAS PLANT OPERATORS' MONTHLY PETROLEUM PRODUCT SALES REPORT" "This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. Title 18 USC 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. See Instructions for further details on the sanctions and the provisions concerning the confidentiality of information submitted on this form."

168

Survey Consumption  

Gasoline and Diesel Fuel Update (EIA)

fsidentoi fsidentoi Survey Consumption and 'Expenditures, April 1981 March 1982 Energy Information Administration Wasningtoa D '" N """"*"""*"Nlwr. . *'.;***** -. Mik>. I This publication is available from ihe your COr : 20585 Residential Energy Consumption Survey: Consum ption and Expendi tures, April 1981 Through March 1982 Part 2: Regional Data Prepared by: Bruce Egan This report was prepared by the Energy Information Administra tion, the independent statistical

169

"Annual Electric Power Industry Report (EIA-861 data file)  

Annual Energy Outlook 2012 (EIA)

Data Released: September 20, 2012 Data for: 2011 Next Release: September 2013 Re-Release Date: November 27, 2012 (CORRECTION) Survey form EIA-861 -- Annual Electric Power Industry...

170

Economic Impacts of the Forest Industry in Florida, 2003 Final Report to the Florida Forestry Association  

E-Print Network (OSTI)

.......................................16 List of Tables Table ES-1. Florida forest industry groups surveyed, response rates, and reported .......................................................................15 Table 3.1. Florida forest industry survey responses and response rates was estimated at around 30 thousand jobs. Table ES-1. Florida forest industry groups surveyed, response rates

Florida, University of

171

Guidelines for Estimating Unmetered Industrial Water Use  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guidelines for Guidelines for Estimating Unmetered Industrial Water Use Prepared for U.S. Department of Energy Federal Energy Management Program By Pacific Northwest National Laboratory Brian Boyd Revised September 2011 Source: Michael Kauffmann 2 Contacts Will Lintner Federal Energy Management Program 1000 Independence Ave., S.W. Washington, D.C. 20585-0121 Phone: (202) 586-3120 E-mail: William.Lintner@ee.doe.gov Brian Boyd Pacific Northwest National Laboratory 902 Battelle Boulevard Richland, WA 99352 Phone: (509) 371-6724 E-mail: Brian.Boyd@pnnl.gov 3 Acknowledgements This document was prepared by the Pacific Northwest National Laboratory (PNNL) on behalf of the Federal Energy Management Program. PNNL would like to thank the Federal Water Working Group of the Interagency Energy Management Task Force, which provided initial

172

Guidelines for Estimating Unmetered Industrial Water Use  

NLE Websites -- All DOE Office Websites (Extended Search)

Guidelines for Guidelines for Estimating Unmetered Industrial Water Use Prepared for U.S. Department of Energy Federal Energy Management Program By Pacific Northwest National Laboratory Brian Boyd Revised September 2011 Source: Michael Kauffmann 2 Contacts Will Lintner Federal Energy Management Program 1000 Independence Ave., S.W. Washington, D.C. 20585-0121 Phone: (202) 586-3120 E-mail: William.Lintner@ee.doe.gov Brian Boyd Pacific Northwest National Laboratory 902 Battelle Boulevard Richland, WA 99352 Phone: (509) 371-6724 E-mail: Brian.Boyd@pnnl.gov 3 Acknowledgements This document was prepared by the Pacific Northwest National Laboratory (PNNL) on behalf of the Federal Energy Management Program. PNNL would like to thank the Federal Water Working Group of the Interagency Energy Management Task Force, which provided initial

173

Climate Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations Employee Operations Employee Climate Survey March 2009 Acknowledgements The Berkeley Lab Survey Team consisted of the following: Jim Krupnick, Sponsor Vera Potapenko, Project Lead Karen Ramorino, Project Manager Chris Paquette, MOR Associates Alexis Bywater, MOR Associates MOR Associates, an external consulting firm, acted as project manager for this effort, analyzing the data and preparing this report. MOR Associates specializes in continuous improve- ment, strategic thinking and leadership development. MOR Associates has conducted a number of large-scale surveys for organizations in higher education, including MIT, Stanford, the University of Chicago, and others. MOR Associates, Inc. 462 Main Street, Suite 300 Watertown, MA 02472 tel: 617.924.4501

174

Solid-State Lighting: DOE Hosts LED Industry Standards Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Information Resources Printable Version Share this resource Send a link to Solid-State Lighting: DOE Hosts LED Industry Standards Workshop to someone by E-mail Share Solid-State Lighting: DOE Hosts LED Industry Standards Workshop on Facebook Tweet about Solid-State Lighting: DOE Hosts LED Industry Standards Workshop on Twitter Bookmark Solid-State Lighting: DOE Hosts LED Industry Standards Workshop on Google Bookmark Solid-State Lighting: DOE Hosts LED Industry Standards Workshop on Delicious Rank Solid-State Lighting: DOE Hosts LED Industry Standards Workshop on Digg Find More places to share Solid-State Lighting: DOE Hosts LED Industry Standards Workshop on AddThis.com... Conferences & Meetings Past Conferences Presentations Publications Webcasts Videos Tools

175

VLBI surveys  

E-Print Network (OSTI)

Systematic surveys of astronomical objects often lead to discoveries, but always provide invaluable information for statistical studies of well-defined samples. They also promote follow-up investigations of individual objects or classes. Surveys using a yet unexplored observing wavelength, a novel technique or a new instrument are of special importance. Significantly improved observing parameters (e.g. sensitivity, angular resolution, monitoring capability) provide new insight into the morphological and physical properties of the objects studied. I give a brief overview of the important Very Long Baseline Interferometry (VLBI) imaging surveys conducted in the past. A list of surveys guides us through the developments up until the present days. I also attempt to show directions for the near future.

S. Frey

2006-11-08T23:59:59.000Z

176

Coal industry annual 1997  

Science Conference Proceedings (OSTI)

Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

NONE

1998-12-01T23:59:59.000Z

177

Economic Impact of the Texas Poultry Industry  

E-Print Network (OSTI)

It is estimated that the Texas poultry industry contributes more than $1.6 billion to the state's economy, according to results of a survey of broiler, egg and turkey producers operating in 2003. Details about industry income, employees and economic impact are presented in this publication.

Carey, John B.

2004-12-02T23:59:59.000Z

178

DIEGO FAZI Mailing address: Solar Energy Conversion Group Chemical Sciences & Engineering Division  

NLE Websites -- All DOE Office Websites (Extended Search)

DIEGO FAZI DIEGO FAZI Mailing address: Solar Energy Conversion Group Chemical Sciences & Engineering Division Bldg 200, Room E105 Argonne National Laboratory 9700 South Cass Ave. Argonne IL 60439-4831 E-mail addresses: dfazi@anl.gov Office Number: 630-252-5796 Fax: 630-252-9289 Personal Pages: http://faculty.wcas.northwestern.edu/diego-fazi/ http://www.fazid.org Research Interests Diego Fazi comes from a theoretical Physics background and he performed research in gravitational-wave astronomy within the project LIGO from 2005 to 2012. In October 2012 Dr. Fazi joined the CSE division at Argonne as a postdoctoral appointee in the Solar Conversion

179

Industrial Use of Infrared Inspections  

E-Print Network (OSTI)

Infrared is and has been an established technology in the military and aerospace fields. However, only relatively recently has this technology found a "use" in the industrial sector. Many reasons exist why the technology has not been used, but in the final analysis it comes down to the fact that the industrial management responsible for the operations and production budgets did not, and in many cases, still does not understand the economic benefits to the company that infrared industrial inspections can bring about. Over the last 2-3 years a number of articles have appeared in various industrial publications concerning infrared surveys. However, all of the articles have dealt with the technical aspects of infrared inspections, with the economics either completely neglected or mentioned only in passing. I believe that in the real industrial world it is the economic benefits of a technology that allow the product of that technology to reach the market and become a success, and not the fact that a technology is useful per se. In this presentation, I shall be focusing primarily on the major economic aspects of the surveys and what the end results really represent in terms of economic benefits. Once the economic benefits of these inspections are clearly understood, it will be readily apparent why the industrial use of these inspections is developing rapidly.

Duch, A. A.

1979-01-01T23:59:59.000Z

180

Industrial Energy Efficiency Programs: Development and Trends  

E-Print Network (OSTI)

As more states establish Energy Efficiency Resource Standards (EERS), goals for energy efficiency savings are increasing across the country. Increasingly, states are relying on their industrial energy efficiency programs to find and help implement those savings. Historically, industrial energy efficiency programs have not been completely effective at finding those savings, in large part because the programs have not been flexible enough to accommodate the heterogeneous needs and unique characteristics of the industrial sector. This paper will discuss the state of industrial energy efficiency programs today. Relying on an ACEEE-administered survey of 35 industrial energy efficiency programs, we will determine current trends and challenges, address emerging needs, and identify best practices in the administration of today's industrial efficiency programs. The paper will serve as an update on industrial energy efficiency program activities and discuss the ways in which today's programs are trying to serve their industrial clients better.

Chittum, A.; Kaufman, N.; Elliot, N.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Making Space for a New Medium: On the Use of Electronic Mail in a Newspaper Newsroom  

Science Conference Proceedings (OSTI)

Within the field of computer-supported cooperative work, there are a continuously growing number of studies of the use of electronic media in groups and organisations. Despite the existence of this impressive body of research, there have been comparatively ... Keywords: computer-mediated communication, electronic mail, ethnographic study, newspaper, newsroom environment, workplace studies

Amelie Hssjer; Kerstin Severinson Eklundh

2009-02-01T23:59:59.000Z

182

*Corresponding author. E-mail address: agagroup@olympus.ece.jhu.edu (A.G. Andreou).  

E-Print Network (OSTI)

*Corresponding author. E-mail address: agagroup@olympus.ece.jhu.edu (A.G. Andreou). This research and Computer Engineering, The Johns Hopkins University, 3400 N. Charles Street, Baltimore, MD 21211, USA contains eight photoreceptors which receive light through a facet lens and respond in graded fashion

Maryland at College Park, University of

183

NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7  

E-Print Network (OSTI)

NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7 meeting Cocks Friedman, Randy NW Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW-8553 bdickens@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen

184

NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector  

E-Print Network (OSTI)

NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector Cocks, Michael BPA Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW Ind. Gas Users (503@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen@intgas.com Distribution Dahlberg

185

Using the Internet DNS to Distribute RFC1327 Mail Address Mapping Tables  

Science Conference Proceedings (OSTI)

This memo defines how to store in the Internet Domain Name System the mapping information needed by e-mail gateways and other tools to map RFC822 domain names into X.400 O/R names and vice versa. Mapping information can be managed in a distributed rather ...

C. Allocchio; A. Bonito; B. Cole; S. Giordano; R. Hagens

1994-08-01T23:59:59.000Z

186

A. Y. T. Leung1 e-mail: bcaleung@cityu.edu.hk  

E-Print Network (OSTI)

X. Guo A. Y. T. Leung1 e-mail: bcaleung@cityu.edu.hk Department of Building and Construction, City, Arizona State University, Tempe, AZ 85287-6106 X. Q. He Department of Building and Construction, City of Carbon Nanotubes: An Atomic-Scale Finite Element Study This paper employs the atomic-scale finite element

Jiang, Hanqing

187

Carbon Emissions: Petroleum Refining Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Petroleum Refining Industry Petroleum Refining Industry Carbon Emissions in the Petroleum Refining Industry The Industry at a Glance, 1994 (SIC Code: 2911) Total Energy-Related Emissions: 79.9 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 21.5% -- Nonfuel Emissions: 16.5 MMTC Total First Use of Energy: 6,263 trillion Btu -- Pct. of All Manufacturers: 28.9% Nonfuel Use of Energy Sources: 3,110 trillion Btu (49.7%) -- Naphthas and Other Oils: 1,328 trillion Btu -- Asphalt and Road Oil: 1,224 trillion Btu -- Lubricants: 416 trillion Btu Carbon Intensity: 12.75 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey", "Monthly Refinery Report" for 1994, and Emissions of Greenhouse Gases in the United States 1998.

188

2009 Canadian Radiation Oncology Resident Survey  

SciTech Connect

Purpose: Statistics from the Canadian post-MD education registry show that numbers of Canadian radiation oncology (RO) trainees have risen from 62 in 1999 to approximately 150 per year between 2003 and 2009, contributing to the current perceived downturn in employment opportunities for radiation oncologists in Canada. When last surveyed in 2003, Canadian RO residents identified job availability as their main concern. Our objective was to survey current Canadian RO residents on their training and career plans. Methods and Materials: Trainees from the 13 Canadian residency programs using the national matching service were sought. Potential respondents were identified through individual program directors or chief resident and were e-mailed a secure link to an online survey. Descriptive statistics were used to report responses. Results: The eligible response rate was 53% (83/156). Similar to the 2003 survey, respondents generally expressed high satisfaction with their programs and specialty. The most frequently expressed perceived weakness in their training differed from 2003, with 46.5% of current respondents feeling unprepared to enter the job market. 72% plan on pursuing a postresidency fellowship. Most respondents intend to practice in Canada. Fewer than 20% of respondents believe that there is a strong demand for radiation oncologists in Canada. Conclusions: Respondents to the current survey expressed significant satisfaction with their career choice and training program. However, differences exist compared with the 2003 survey, including the current perceived lack of demand for radiation oncologists in Canada.

Debenham, Brock, E-mail: debenham@ualberta.net [Department of Radiation Oncology, Cross Cancer Institute, University of Alberta, Edmonton, Alberta (Canada); Banerjee, Robyn [Department of Radiation Oncology, Tom Baker Cancer Centre, University of Calgary, Calgary, Alberta (Canada); Fairchild, Alysa; Dundas, George [Department of Radiation Oncology, Cross Cancer Institute, University of Alberta, Edmonton, Alberta (Canada); Trotter, Theresa [Department of Radiation Oncology, Tom Baker Cancer Centre, University of Calgary, Calgary, Alberta (Canada); Yee, Don [Department of Radiation Oncology, Cross Cancer Institute, University of Alberta, Edmonton, Alberta (Canada)

2012-03-15T23:59:59.000Z

189

ARM User Survey Report: Data Access, Quality, and Delivery  

SciTech Connect

The objective of this survey was to obtain user feedback to determine how users of the Atmospheric Radiation Measurement (ARM) Climate Research Facility Data Archive interact with the more than 2000 available types of datastreams. The survey also gathered information about data discovery and data quality. The Market and Competitive Analysis group at Pacific Northwest National Laboratory worked with web administrators to develop a landing page from which users could access the survey. A survey invitation was sent by ARM via email to about 6100 users on February 22, 2012. The invitation was also posted on the ARM website and Facebook page. Reminders were sent via e-mail and posted on Facebook while the survey was open, February 22-March 23, 2012.

Mather, JH; Roeder, LR; Sivaraman, C

2012-06-28T23:59:59.000Z

190

Associations and Industry - TMS  

Science Conference Proceedings (OSTI)

... Associations and Industry, Research Programs, ==== Basic Metallurgy ==== ... FORUMS > ASSOCIATIONS AND INDUSTRY, Replies, Views, Originator, Last...

191

Industrial alliances  

Science Conference Proceedings (OSTI)

The United States is emerging from the Cold War era into an exciting, but challenging future. Improving the economic competitiveness of our Nation is essential both for improving the quality of life in the United States and maintaining a strong national security. The research and technical skills used to maintain a leading edge in defense and energy now should be used to help meet the challenge of maintaining, regaining, and establishing US leadership in industrial technologies. Companies recognize that success in the world marketplace depends on products that are at the leading edge of technology, with competitive cost, quality, and performance. Los Alamos National Laboratory and its Industrial Partnership Center (IPC) has the strategic goal to make a strong contribution to the nation`s economic competitiveness by leveraging the government`s investment at the Laboratory: personnel, infrastructure, and technological expertise.

Adams, K.V.

1993-09-13T23:59:59.000Z

192

Attitudinal survey of citizens in a potential Gulf Coast geopressured-geothermal test-well locality. Final report  

DOE Green Energy (OSTI)

The results of a mail survey used to tap the opinions of the public at large in the study area are described. Attention in that section is focused on awareness of the resource, favorability toward the impending development, concerns about the development, attitudes regarding how the development should take place, levels of community satisfaction, and perceived future problems due to community growth. An analysis is given of the 33 interviews conducted with local representatives of the financial and commercial sectors, government, industry, agriculture, and environmental groups. The main foci here are perceived problems and benefits associated with geothermal development and the local capacity for coping with strains on community services resulting from any population growth which may be generated by resource development. A comparison and synthesis of the results from the general survey and the sector interviews is included. In conclusion, policy recommendations are made for means through which to consolidate goals and to achieve resource development objectives with minimal antagonism of and problems for local citizens and community sectors.

Lopreato, S.C.; Blissett, M.

1977-05-01T23:59:59.000Z

193

Tobias Maile  

NLE Websites -- All DOE Office Websites (Extended Search)

and Matthew Garr. "A software tool to compare measured and simulated building energy performance data." In IBPSA Building Simulation 2011. Sydney, Australia, 2011....

194

JOM Salary Survey - TMS  

Science Conference Proceedings (OSTI)

JOM Salary Survey. This survey is currently closed. Please contact the author of this survey for further assistance. Javascript is required for this site to function,...

195

Environmental concerns gaining importance in industry operations  

Science Conference Proceedings (OSTI)

This paper reports that environmental concerns have leapt to the forefront of industry's concerns in operating in Latin America. The United Nations Conference on Environment and Development in Rio de Janeiro June 3-14 focused a strong world spotlight on the region's environmental and commercial resources. Protection of the region's rain forests, which accounts for a huge share of the world's total, is emerging as an especially contentious issue. Ecuador's Oriente region may well prove the litmus test of how or whether oil and gas companies are able to operate in Latin American rain forests. Controversy over industry operations in the Oriente have heated to the point that environmentalist and native groups have routinely picketed company offices in Quito and used mass fundraiser mailings in North America.

Not Available

1992-07-06T23:59:59.000Z

196

Transforming the Freight Industry  

E-Print Network (OSTI)

Transforming the Freight Industry From Regulation to Icommon-carrier freight industry was Competition to backwardjourneys. When the freight industry was deregulated, it was

Regan, Amelia

2002-01-01T23:59:59.000Z

197

Demographics and industry returns  

E-Print Network (OSTI)

Demographics and Industry Returns By Stefano DellaVigna andand returns across industries. Cohort size fluc- tuationspredict profitability by industry. Moreover, forecast demand

Pollet, Joshua A.; DellaVigna, Stefano

2007-01-01T23:59:59.000Z

198

2012 NERSC User Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Results 2012 User Survey Text 2012 NERSC User Survey Text The 2012 NERSC User Survey is closed. The following is the text of the survey. Section 1: Overall Satisfaction with...

199

SURVEY OF OPERATION AND MAINTENANCE-RELATED MATERIALS NEEDS IN GEOTHERMAL POWER PLANTS  

SciTech Connect

A survey was conducted to determine operation and maintenance (O and M)-related materials needs in geothermal power plants and to identify future research and development to address these needs. A total of 44 questionnaires was mailed to geothermal plant operators and industry consultants. The response rate was 54%. The participants were asked to describe type and frequency of materials problems, strategies currently used to mitigate such problems, barriers to using new or alternative materials and technologies, sources of information and give their views research and development priorities. A. wide range of opinions was obtained, reflecting each individual respondent's perspective and the site-specific nature of some problems. However, the consensus is that corrosion and scaling remain major issues and that components requiring performance improvements include pipelines, well casing, turbines, heat exchangers, condensers, valves and cooling towers. It is recommended that appropriate research and development continue to be directed at reducing O and M costs associated with materials failure or inadequate service. There should be a balance between optimizing existing materials through better design and understanding of behavior in geothermal environments and development of new materials. Life extension of existing equipment, service life prediction, education of plant personnel in materials and methods for mitigating corrosion, and improvements in inhibitors and biocides would also be beneficial.

ALLAN,M.L.

1998-06-01T23:59:59.000Z

200

Survey of operation and maintenance-related materials needs in geothermal power plants  

DOE Green Energy (OSTI)

A survey was conducted to determine operation and maintenance (O and M)-related materials needs in geothermal power plants and to identify future research and development to address these needs. A total of 44 questionnaires was mailed to geothermal plant operators and industry consultants. The response rate was 54%. The participants were asked to describe type and frequency of materials problems, strategies currently used to mitigate such problems, barriers to using new or alternative materials and technologies, sources of information and give their views on research and development priorities. A wide range of opinions was obtained, reflecting each individual respondent`s perspective and the site-specific nature of some problems. However, the consensus is that corrosion and scaling remain major issues and that components requiring performance improvements include pipelines, well casing, turbines, heat exchangers, condensers, valves and cooling towers. It is recommended that appropriate research and development continue to be directed at reducing O and M costs associated with materials failure or inadequate service. There should be a balance between optimizing existing materials through better design and understanding of behavior in geothermal environments and development of new materials. Life extension of existing equipment, service life prediction, education of plant personnel in materials and methods for mitigating corrosion, and improvements in inhibitors and biocides would also be beneficial.

Allan, M.L.

1998-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

SURVEY OF OPERATION AND MAINTENANCE-RELATED MATERIALS NEEDS IN GEOTHERMAL POWER PLANTS  

DOE Green Energy (OSTI)

A survey was conducted to determine operation and maintenance (O and M)-related materials needs in geothermal power plants and to identify future research and development to address these needs. A total of 44 questionnaires was mailed to geothermal plant operators and industry consultants. The response rate was 54%. The participants were asked to describe type and frequency of materials problems, strategies currently used to mitigate such problems, barriers to using new or alternative materials and technologies, sources of information and give their views research and development priorities. A. wide range of opinions was obtained, reflecting each individual respondent's perspective and the site-specific nature of some problems. However, the consensus is that corrosion and scaling remain major issues and that components requiring performance improvements include pipelines, well casing, turbines, heat exchangers, condensers, valves and cooling towers. It is recommended that appropriate research and development continue to be directed at reducing O and M costs associated with materials failure or inadequate service. There should be a balance between optimizing existing materials through better design and understanding of behavior in geothermal environments and development of new materials. Life extension of existing equipment, service life prediction, education of plant personnel in materials and methods for mitigating corrosion, and improvements in inhibitors and biocides would also be beneficial.

ALLAN,M.L.

1998-06-01T23:59:59.000Z

202

Industry Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

idatech.com idatech.com info@idatech.com 63065 NE 18 th Street Bend, OR 97701 541.383.3390 Industry Perspective Biogas and Fuel Cell Workshop National Renewable Energy Laboratory June 11 - 13, 2012 Mike Hicks Chairman of the Board of Directors, FCHEA Treasurer of the Board of Directors, FCS&E Engineering Manager, Technology Development & Integration, IdaTech Outline 1. Critical Factors * Fuel Purity * Fuel Cost 2. Natural Gas - The Wild Card & Competition 3. IdaTech's Experience Implementing Biofuel Critical Factor - Fuel Purity All fuel cell system OEMs have fuel purity specifications * Independent of * Raw materials or feed stocks * Manufacturing process * Depends on * Fuel processor technology * Fuel cell technology - low temp PEM versus SOFC

203

Solid-State Lighting: Industry Leaders, Research Experts Gather for 2006  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry Leaders, Research Industry Leaders, Research Experts Gather for 2006 DOE Solid-State Lighting Workshop to someone by E-mail Share Solid-State Lighting: Industry Leaders, Research Experts Gather for 2006 DOE Solid-State Lighting Workshop on Facebook Tweet about Solid-State Lighting: Industry Leaders, Research Experts Gather for 2006 DOE Solid-State Lighting Workshop on Twitter Bookmark Solid-State Lighting: Industry Leaders, Research Experts Gather for 2006 DOE Solid-State Lighting Workshop on Google Bookmark Solid-State Lighting: Industry Leaders, Research Experts Gather for 2006 DOE Solid-State Lighting Workshop on Delicious Rank Solid-State Lighting: Industry Leaders, Research Experts Gather for 2006 DOE Solid-State Lighting Workshop on Digg Find More places to share Solid-State Lighting: Industry Leaders,

204

Office of Industrial Technologies: Industry partnerships  

SciTech Connect

US industries are making progress in turning the vision of the future into reality: More effective competition in global markets, increased industrial efficiency, more jobs, reduced waste generation and greenhouse gas emissions (to 1990 levels), improved environment. DOE`s Office of Industrial Technologies is catalyzing and supporting industry progress in many ways. This pamphlet gives an overview of OIT.

1995-04-01T23:59:59.000Z

205

Commodity Flow Survey | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Commodity Flow Survey Commodity Flow Survey BusinessUSA Data/Tools Apps Challenges Let's Talk BusinessUSA You are here Data.gov » Communities » BusinessUSA » Data Commodity Flow Survey Dataset Summary Description The Commodity Flow Survey provides information on commodities shipped, their value, weight, and mode of transportation, as well as the origin and destination of shipments of commodities from manufacturing, mining, wholesale, and selected retail and services establishments. It is undertaken through a partnership between the Bureau of the Census, U.S. Department of Commerce, and the Bureau of Transportation Statistics, Research and Innovative Technology Administration. Tags {cfc,commodity,flow," federal",state,local,transportation,facilities,services,energy,safety,environment,Mining,Manufacturing,Wholesale,trade,Retail,Services,auxiliary,establishments,warehouses,industries,export,shipment,distance,tons,weight,hazardous,miles,ton-miles,destination,industry,hazard,ship,intrastate,interstate,"UN number",packaging,"TIH number",u.s.,metropolitan}

206

Photovoltaic industry manufacturing technology. Final report  

DOE Green Energy (OSTI)

This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

1998-08-01T23:59:59.000Z

207

Vehicle Technologies Office: Fact #666: March 14, 2011 Survey says Electric  

NLE Websites -- All DOE Office Websites (Extended Search)

6: March 14, 6: March 14, 2011 Survey says Electric Vehicle Prices are Key to someone by E-mail Share Vehicle Technologies Office: Fact #666: March 14, 2011 Survey says Electric Vehicle Prices are Key on Facebook Tweet about Vehicle Technologies Office: Fact #666: March 14, 2011 Survey says Electric Vehicle Prices are Key on Twitter Bookmark Vehicle Technologies Office: Fact #666: March 14, 2011 Survey says Electric Vehicle Prices are Key on Google Bookmark Vehicle Technologies Office: Fact #666: March 14, 2011 Survey says Electric Vehicle Prices are Key on Delicious Rank Vehicle Technologies Office: Fact #666: March 14, 2011 Survey says Electric Vehicle Prices are Key on Digg Find More places to share Vehicle Technologies Office: Fact #666: March 14, 2011 Survey says Electric Vehicle Prices are Key on

208

Impostazioni Google Apps con client Mail di Apple Mac per l'account di fantasia pinco.panco@uniroma1.it  

E-Print Network (OSTI)

Impostazioni Google Apps con client Mail di Apple Mac per l'account di fantasia pinco è ospitato sui server google.com) #12;Impostazioni Google Apps con client Mail di Apple Mac per l Google Apps con client Mail di Apple Mac per l'account di fantasia pinco.panco@uniroma1.it Pag. 3

Di Pillo, Gianni

209

Underground Distribution: Urban Network Practices Survey - 2012  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has undertaken a multiyear research effort to identify and describe leading industry practices for managing urban network systems in the key functional areas of planning, design, construction, maintenance, operations, and safety. This report summarizes the results of the 2012 survey of urban network practices issued by EPRI and provides comparisons to a similar survey issued by EPRI in 2009.

2012-07-11T23:59:59.000Z

210

Analysis of concentrating PV-T systems for the commercial/industrial sector. Volume II. PV-T state-of-the-art survey and site/application pair selection and analysis  

DOE Green Energy (OSTI)

As part of a project to develop feasibility assessments, design procedures, and reference designs for total energy systems that could use actively cooled concentrating photovoltaic collectors, a survey was conducted to provide an overview of available photovoltaic-thermal (PV-T) technology. General issues associated with the design and installation of a PV-T system are identified. Electrical and thermal efficiencies for the line-focus Fresnel, the linear parabolic trough, and the point-focus Fresnel collectors are specified as a function of operating temperature, ambient temperature, and insolation. For current PV-T technologies, the line-focus Fresnel collector proved to have the highest thermal and electrical efficiencies, lowest array cost, and lowest land area requirement. But a separate feasibility analysis involving 11 site/application pairs showed that for most applications, the cost of the photovoltaic portion of a PV-T system is not recovered through the displacement of an electrical load, and use of a thermal-only system to displace the thermal load would be a more economical alternative. PV-T systems are not feasible for applications that have a small thermal load, a large steam requirement, or a high load return temperature. SAND82-7157/3 identifies the technical issues involved in designing a photovoltaic-thermal system and provides guidance for resolving such issues. Detailed PV-T system designs for three selected applications and the results of a trade-off study for these applications are presented in SAND82-7157/4. A summary of the major results of this entire study and conclusions concerning PV-T systems and applications is presented in SAND82-7157/1.

Schwinkendorf, W.E.

1984-09-01T23:59:59.000Z

211

EIA Energy Efficiency-Table 4e. Gross Output by Selected Industries...  

Gasoline and Diesel Fuel Update (EIA)

e Page Last Modified: May 2010 Table 4e. Gross Output1by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS Subsector and Industry 1998 2002...

212

The Role of Emerging Technologies in Improving Energy Efficiency: Examples from the Food Processing Industry  

E-Print Network (OSTI)

2002 Manufacturing Energy Consumption Survey, Washington,impacts on industrial energy consumption. The cumulativeemerging technologies on energy consumption in the U.S. food

Lung, Robert Bruce; Masanet, Eric; McKane, Aimee

2006-01-01T23:59:59.000Z

213

Advanced commercial survey methods (COMSURV). Volume 1. Demonstration of tailored versus general questionnaires. Final report  

Science Conference Proceedings (OSTI)

This report discusses the results of a demonstration to assess the effects of questionnaire design on response rates, data quality, and general questionnaire performance in commercial sector surveys. With the cooperation of the Virginia Power Company (VEPCO), the concept of tailoring the questionnaire to specific types of commercial establishments was tested in a survey of food stores and office buildings. Tailoring involves the use of trade-specific language, questions about specialized equipment, and special instructions. One result of this study was the demonstration that it is possible to collect detailed trade-specific information with a tailored mail survey instrument. It was also expected that tailoring would improve both overall response rates and question-specific response rates, but this does not appear to be the case. In fact, the results indicate that tailored questionnaires may decrease overall response rates since misclassified units are less likely to respond. In view of this, some guidelines for the use of tailored survey instruments are presented. This report also contains numerous comparisons of the VEPCO survey results with results from the Nonresidential Building Energy Consumption Survey (NBECS). The comparisons reveal that the mail survey technique did provide estimates which compared reasonably with larger-scale on-site surveys.

McCarthy, P.M.; Bernstein, H.M.

1986-03-01T23:59:59.000Z

214

Robotic Surveying  

SciTech Connect

ZAPATA ENGINEERING challenged our engineers and scientists, which included robotics expertise from Carnegie Mellon University, to design a solution to meet our client's requirements for rapid digital geophysical and radiological data collection of a munitions test range with no down-range personnel. A prime concern of the project was to minimize exposure of personnel to unexploded ordnance and radiation. The field season was limited by extreme heat, cold and snow. Geographical Information System (GIS) tools were used throughout this project to accurately define the limits of mapped areas, build a common mapping platform from various client products, track production progress, allocate resources and relate subsurface geophysical information to geographical features for use in rapidly reacquiring targets for investigation. We were hopeful that our platform could meet the proposed 35 acres per day, towing both a geophysical package and a radiological monitoring trailer. We held our breath and crossed our fingers as the autonomous Speedrower began to crawl across the playa lakebed. We met our proposed production rate, and we averaged just less than 50 acres per 12-hour day using the autonomous platform with a path tracking error of less than +/- 4 inches. Our project team mapped over 1,800 acres in an 8-week (4 days per week) timeframe. The expertise of our partner, Carnegie Mellon University, was recently demonstrated when their two autonomous vehicle entries finished second and third at the 2005 Defense Advanced Research Projects Agency (DARPA) Grand Challenge. 'The Grand Challenge program was established to help foster the development of autonomous vehicle technology that will some day help save the lives of Americans who are protecting our country on the battlefield', said DARPA Grand Challenge Program Manager, Ron Kurjanowicz. Our autonomous remote-controlled vehicle (ARCV) was a modified New Holland 2550 Speedrower retrofitted to allow the machine-actuated functions to be controlled by an onboard computer. The computer-controlled Speedrower was developed at Carnegie Mellon University to automate agricultural harvesting. Harvesting tasks require the vehicle to cover a field using minimally overlapping rows at slow speeds in a similar manner to geophysical data acquisition. The Speedrower had demonstrated its ability to perform as it had already logged hundreds of acres of autonomous harvesting. This project is the first use of autonomous robotic technology on a large-scale for geophysical surveying.

Suzy Cantor-McKinney; Michael Kruzic

2007-03-01T23:59:59.000Z

215

Natural balance of graminicolous aphids in Pakistan. Survey of populations  

E-Print Network (OSTI)

Natural balance of graminicolous aphids in Pakistan. Survey of populations Sulaiman HAMID Sind Sugar Industry Research Institute, 14-A, Latifabad III, Hyderabad Sind, Pakistan SUMMARY Aphids attacking gramineous crops were studied in seven climatically and ecologically different regions of Pakistan

Recanati, Catherine

216

Survey Background and Technical Information on CBECS  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Background and Technical Information Survey Background and Technical Information Survey Background and Technical Information Survey Background The commercial sector encompasses a vast range of building types- service businesses, such as retail and wholesale stores, hotels and motels, restaurants, and hospitals, as well as certain buildings that would not be considered "commercial" in a traditional economic sense, such as public and private schools, correctional institutions, and religious and fraternal organizations. Excluded from the sector are the goods-producing industries: manufacturing, agriculture, mining, forestry and fisheries, and construction. Nearly all energy use in the commercial sector takes place in, or is associated with, the buildings that house these commercial activities. Analysis of the structures, activities, and equipment associated with different types of buildings is the clearest way to evaluate commercial sector energy use. The Commercial Buildings Energy Consumption Survey (CBECS) is a national-level sample survey of commercial buildings and their energy suppliers conducted quadrennially (previously triennially) by the Energy Information Administration (EIA). The 2003 CBECS was the eighth survey in the series begun in 1979. From 1979 to 1986, the survey was known as the Nonresidential Buildings Energy Consumption Survey, or NBECS.

217

Buildings Energy Data Book: 2.7 Industrialized Housing (IH)  

Buildings Energy Data Book (EERE)

2 2 2007 Top Five Manufacturers of Modular/3D Housing Units (1) Company Champion Enterprises, Inc. 27% CMH Manufacturing 14% All American Homes, LLC 10% Palm Harbor Homes, Inc. 10% Excel Homes LLC 7% Note(s): Source(s): 1,200 110.6 1) Data based on mail-in surveys from manufacturers, which may not be entirely complete. 2) Market shares based on total gross sales volume of the Modular/3D home producers included in the list of the top 25 factory-built producers responding to the survey. In 2007, surveyed Modular/3D home sales were estimated at $1.6 billion and 20,601 units. HousingZone.com, 2007 Factory Built Housing Results, http://www.housingzone.com/factory.html. 3,200 228.8 1,689 165.4 1,614 162.9 Gross Sales Market Share of Top Units Produced Volume ($million) 25 Company Sales (2)

218

Buildings Energy Data Book: 2.7 Industrialized Housing (IH)  

Buildings Energy Data Book (EERE)

4 4 2004 Top Five Manufacturers of Factory-Fabricated Components (1) Company Carpenter Contractors 175.0 1,130 Automated Building Company 102.5 702 Landmark Truss 45.0 425 Southern Building Products 25.9 180 Dolan Lumber & Truss 25.1 260 Note(s): Source(s): Automated Builder Magazine, Sept. 2005, p. 40-41. 26% 15% 7% 4% 4% 1) Factory-fabricated components include trusses, wall panels, and doors. Data based on mail-in surveys from manufacturers, which may not be entirely complete. 2) Market shares based on total gross sales volume of producers of only components included in the list of the top 26 IH producers responding to the survey. In 2004, surveyed component sales was estimated at $665.1 million. 3) The top 26 companies employ over 4,970 people at their plants. Gross Sales

219

Buildings Energy Data Book: 2.7 Industrialized Housing (IH)  

Buildings Energy Data Book (EERE)

1 1 2007 Top Five Manufacturers of Factory-Built Housing Units (1) Company CMH Manufacturing 20% Champion Enterprises, Inc. 19% Palm Harbor Homes, Inc. 10% Fleetwood Enterprises, Inc. 9% Skyline Corporation 6% Note(s): Source(s): 8,207 376.4 1) Data based on mail-in surveys from manufacturers which may not be entirely complete. 2) Market shares based on total gross sales volume of the factory-built home producers included in the list of the top 25 factory-built producers responding to the survey. In 2007, surveyed factory-built home sales were estimated at $6.6 billion and 133,361 units. HousingZone.com, 2007 Factory Built Housing Results. 21,126 1,286.6 8,911 679.1 15,137 600.0 Gross Sales Market Share of Top Units Produced Volume ($million) 25 Company Sales (2) 31,100 1,327.8

220

Buildings Energy Data Book: 2.7 Industrialized Housing (IH)  

Buildings Energy Data Book (EERE)

3 3 2007 Top Five Manufacturers of HUD-Code (Mobile) Homes (1) Company CMH Manufacturing 23% Champion Enterprises, Inc. 18% Fleetwood Enterprises, Inc. 12% Palm Harbor Homes 11% Skyline Corporation 8% Note(s): Source(s): 8,207 376 1) Data based on mail-in surveys from manufacturers, which may not be entirely complete. 2) Market shares based on total gross sales volume of the HUD-Code home producers included in the list of the top 25 factory-built producers responding to the survey. In 2007, surveyed HUD-Code home sales were estimated at $4.83 billion and 109,320 units. HousingZone.com, 2007 Factory Built Housing Results, http://www.housingzone.com/factory.html. 16,473 848 15,137 600 7,297 516 Gross Sales Market Share of Top Units Produced Volume ($million) 25 Company Sales (2)

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

First high-temperature electronics products survey 2005.  

Science Conference Proceedings (OSTI)

On April 4-5, 2005, a High-Temperature Electronics Products Workshop was held. This workshop engaged a number of governmental and private industry organizations sharing a common interest in the development of commercially available, high-temperature electronics. One of the outcomes of this meeting was an agreement to conduct an industry survey of high-temperature applications. This report covers the basic results of this survey.

Normann, Randy Allen

2006-04-01T23:59:59.000Z

222

1998 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

8 User Survey Results 1998 User Survey Results Respondent Summary NERSC has completed its first user survey since its move to Lawrence Berkeley National Laboratory. The survey is...

223

Annual Capital Expenditures Survey | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Annual Capital Expenditures Survey Annual Capital Expenditures Survey BusinessUSA Data/Tools Apps Challenges Let's Talk BusinessUSA You are here Data.gov » Communities » BusinessUSA » Data Annual Capital Expenditures Survey Dataset Summary Description Provides national estimates of investment in new and used buildings and other structures, machinery, and equipment by U.S. nonfarm businesses with and without employees. Data are published by industry for companies with employees for NAICS 3-digit and selected 4-digit industries. Data on the amount of business expenditures for new plant and equipment and measures of the stock of existing facilities are critical to evaluate productivity growth, the ability of U.S. business to compete with foreign business, changes in industrial capacity, and measures of overall economic performance. In addition, ACES data provide industry analysts with capital expenditure data for market analysis, economic forecasting, identifying business opportunities and developing new and strategic plans. The ACES is an integral part of the Federal Government's effort to improve and supplement ongoing statistical programs. Private companies and organizations,, educators and students, and economic researchers use the survey results for analyzing and conducting impact evaluations on past and current economic performance, short-term economic forecasts, productivity, long-term economic growth, tax policy, capacity utilization, business fixed capital stocks and capital formation, domestic and international competitiveness trade policy, market research, and financial analysis.

224

North Carolina Geological Survey | Open Energy Information  

Open Energy Info (EERE)

State North Carolina State North Carolina Name North Carolina Geological Survey Address 1612 Mail Service Center City, State Raleigh, North Carolina Zip 27699-1612 Website http://www.geology.enr.state.n Coordinates 35.67°, -78.66° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.67,"lon":-78.66,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

225

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

| Industrial Program Coordinator | Publications Courtesy of The New York Times, Noah Berger The overall goal of the plan to enhance the NSLS facility's Industrial Users'...

226

Uranium industry annual 1997  

SciTech Connect

This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

NONE

1998-04-01T23:59:59.000Z

227

Construction Industry Institute  

Science Conference Proceedings (OSTI)

... in one of our country's most vital industries. ... An industry-led program to disseminate practical ... fire-proofing materials, connections, and steel trusses; ...

2010-10-05T23:59:59.000Z

228

A survey of software testing practices in Canada  

Science Conference Proceedings (OSTI)

Software testing is an important activity in the software development life-cycle. In an earlier study in 2009, we reported the results of a regional survey of software testing practices among practitioners in the Canadian province of Alberta. To get ... Keywords: Canada, Industry practices, Software testing, Survey

Vahid Garousi; Junji Zhi

2013-05-01T23:59:59.000Z

229

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Demand Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Demand Module calculates energy consumption for the four Census Regions (see Figure 5) and disaggregates the energy consumption

230

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Module calculates

231

Industrial Applications of Renewable Resources  

Science Conference Proceedings (OSTI)

Archive of Industrial Applications of Renewable Resources Industrial Applications of Renewable Resources Cincinnati, Ohio, USA Industrial Applications of Renewable Resources ...

232

E-Mail: tliss@umn.edu Web Site: tli.umn.edu  

E-Print Network (OSTI)

Management, Maintenance & Rehabilitation Structural and functional evaluation of steel, concrete, and timber technologies being transferred to industry. After 9/11 he directed all security-related research of public/private educational, commercial and industrial projects, as well as consulting on development

Amin, S. Massoud

233

BY FAX AND CERTIFIED MAIL James A. Garrett President AeroSys, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

13, 2010 13, 2010 BY FAX AND CERTIFIED MAIL James A. Garrett President AeroSys, Inc. 929 Eldridge Drive Hagerstown, MD 21740 Dear Mr. Garrett: The attached notice advises you of test results stemming from the September 24, 2009 test notice issued by the United States Department of Energy (DOE) pursuant to 10 CFR § 430.70 regarding the performance of the remaining products manufactured by AeroSys, Inc. (AeroSys) that were selected for enforcement testing. The notice also advises you of your legal obligations. Violations of the applicable energy-efficiency standards may be subject to civil penalties. Separate from this notice, DOE may issue a notice of liability for such penalties as appropriate. As specified in the attached notice, DOE asks that AeroSys acknowledge receipt of this notice

234

Industrial Geospatial Analysis Tool for Energy Evaluation  

E-Print Network (OSTI)

IGATE-E is an industrial energy analysis tool. The tool is intended to be a decision support and planning tool to a wide spectrum of energy analysts, engineers, researchers, government organizations, private consultants, industry partners, and alike. The tool applies statistical modeling to multiple datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using information from DOE's Industrial Assessment Center database (IAC-DB) and DOE's Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool utilizes the DOE EIA-MECS energy survey data to validate bottom-up estimates and permits several statistical examinations.

Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

2013-01-01T23:59:59.000Z

235

Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

1 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive 1 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Data Methodology & Forms + EXPAND ALL Consumption of Energy for All Purposes (First Use) Total Primary Consumption of Energy for All Purposes by Census Region, Industry Group, and Selected Industries, 1991: Part 1 (Estimates in Btu or Physical Units) XLS Total Primary Consumption of Energy for All Purposes by Census Region, Industry Group, and Selected Industries, 1991: Part 2 (Estimates in Trillion Btu) XLS Total Consumption of LPG, Distillate Fuel Oil, and Residual Fuel Oil for Selected Purposes by Census Region, Industry Group, and Selected Industries, 1991 (Estimates in Barrels per Day) XLS Total Primary Consumption of Energy for All Purposes by Census Region and Economic Characteristics of the Establishment, 1991 (Estimates in Btu or Physical Units) XLS

236

Climate VISION: Industry Associations  

Office of Scientific and Technical Information (OSTI)

Industry Associations Industry Associations Aluminum Aluminum Association (Coordinating aluminum industry Climate VISION activities) The Aluminum Association, Inc. is the trade association for producers of primary aluminum, recyclers and semi-fabricated aluminum products, as well as suppliers to the industry. The Association provides leadership to the industry through its programs and services which aim to enhance aluminum's position in a world of proliferating materials, increase its use as the "material of choice," remove impediments to its fullest use, and assist in achieving the industry's environmental, societal, and economic objectives. Automobile Manufacturers Alliance of Automobile Manufacturers (Coordinating automobile industry Climate VISION activities) The Alliance of Automobile Manufacturers, Inc. is a trade association

237

Sponsors of CIEEDAC: Natural Resources Canada, Canadian Industry Program for Energy Conservation, Aluminium Industry Association, Canadian Petroleum Products Institute, Canadian Portland Cement Association, Canadian Pulp  

E-Print Network (OSTI)

2. Industrial Consumption of Energy, and the Quarterly Report of Energy Supply and Demand 3. Annual Canada (NRCan): 1. Annual Survey of Manufacturers (ASM, from STC) 2. Industrial Consumption of Energy consistent source of historical data related to energy consumption in all Canadian industry by region

238

Add me to your mailing list for future information about energy management courses.  

E-Print Network (OSTI)

, gas, electricity and steam) and familiarize yourself with an overview of LEED. Explore optimization and distribution and those pertaining to gas production, transmission and distribution. You will also survey indoor

California at Davis, University of

239

FAQs for Survey Form EIA-821  

Gasoline and Diesel Fuel Update (EIA)

21 21 What is the purpose of the EIA-821 survey? The EIA-821 survey is used to collect annual data on the sales of distillate and residual fuel oils, and kerosene to various categories of energy users at the state level. How is this data used? The data collected on the EIA-821 survey are used by EIA and the Department of Energy (DOE) in determining petroleum product supply and demand changes. In addition, the data are used by Federal, State, and local agencies, Congress, industry analysts, trade publications, academia, and the public to analyze, model and forecast petroleum product sales by state and energy use category. Where can I find published data from the EIA-821 survey? The annual data are published in the Fuel Oil and Kerosene Sales. The Fuel Oil and Kerosene Sales report provides information, illustrations

240

User_LaunchSurvey  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Completing Assigned Survey and Completing Assigned Survey © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Launching and Completing Assigned Survey Purpose The purpose of this job aid is to guide users through the step-by-step process of launching and completing assigned surveys. Task A. Launch and Complete Assigned Survey From the Home page, filter the To-Do List to show only Surveys. Hover over the course evaluation title. Click Open. 1 2 3 3 2 1 Launch and Complete Assigned Survey 6 Steps Task A SuccessFactors Learning v 6.4 User Job Aid Launching and Completing Assigned Survey © 2011 SuccessFactors, Inc. - 2 - SuccessFactors Learning Complete the survey by selecting the radio button for the appropriate rating

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Case Studies of Industrial Cogeneration in the U. S.  

E-Print Network (OSTI)

This paper describes the results of a survey and evaluation of plant-specific information on industrial cogeneration. The study was performed as part of a project sponsored by the Electric Power Research Institute to evaluate Dual Energy Use Systems (DEUS). The purpose of this project was to evaluate site specific data on DEUS from the utility perspective, identify promising candidates, and define R&D opportunities. The first major task in this DEUS project was a survey of industrial cogeneration sites to identify the technoeconomic and institutional factors affecting the success of cogeneration systems in industry. Sites were selected based on a mix of industry types, geographic location, type of cogeneration system, generating capacity, age of plant and other characteristics. Site-specific surveys were conducted and supplemented by information from secondary sources such as FERC and DOE statistical data systems. This paper presents information on 17 cogeneration facilities. Also presented is information on the perspectives of the relevant utilities.

Limaye, D. R.; Isser, S.; Hinkle, B.; Hough, T.

1980-01-01T23:59:59.000Z

242

Carbon Emissions: Iron and Steel Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Iron and Steel Industry Iron and Steel Industry Carbon Emissions in the Iron and Steel Industry The Industry at a Glance, 1994 (SIC Code: 3312) Total Energy-Related Emissions: 39.9 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 10.7% -- Nonfuel Emissions: 22.2 MMTC Total First Use of Energy: 1,649 trillion Btu -- Pct. of All Manufacturers: 7.6% Nonfuel Use of Energy: 886 trillion Btu (53.7%) -- Coal: 858 trillion Btu (used to make coke) Carbon Intensity: 24.19 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 39.9 Coal 22.7

243

High Tech and Industrial Systems Group  

NLE Websites -- All DOE Office Websites (Extended Search)

High Tech and Industrial Systems Group High Tech and Industrial Systems Group Some of the largest energy users in today's economy are high tech buildings and industrial systems. They operate up to 24 hours per day with energy intensities much greater than typical commercial or residential buildings, and they are essential to the national economy. High-tech buildings, such as laboratories, cleanrooms, data centers, and hospitals, are characterized by large base-loads, continuous operation, and high energy-use intensities. These buildings crosscut many industries and institutions. Group activities and products include: benchmarking surveys and metrics, case study reports, technology development, technology demonstrations, assessment and profiling tools, best practice guides, workshops, training guides, and development of other strategies.

244

A Manpower Assessment of the Geothermal Industry  

DOE Green Energy (OSTI)

The authors were asked to estimate the net employment gains in the geothermal industry from 1980 to 1985 and 1990. Method was by survey. Response rates were high, so the estimates here likely reflect industry knowledge and outlooks at the start of the most active construction decade of the U.S. geothermal industry. An untitled table following Table IV-1 is of great interest because it breaks out employment requirement estimates for different phases/aspects of project development, i.e., exploration and resource assessment, exploratory drilling, production drilling, power plant construction, feed system (field piping) construction, field operation and maintenance, power plant operation and maintenance, and transmission line construction. Estimates like these are rare in the U.S. geothermal literature. While these estimates are dated, they comprise an historical economic baseline from which improvements in labor use in the geothermal industry might be constructed. (DJE 2005)

None

1979-08-24T23:59:59.000Z

245

ORISE: Characterization surveys  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization surveys Characterization surveys An ORISE technicians performs a characterization survey The Oak Ridge Institute for Science and Education (ORISE) performs independent, objective characterization surveys to define the extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental aspect of all D&D projects, characterization surveys provide guidance to determine the best remediation procedures and are a cost-effective method of ensuring a site meets preliminary regulatory standards. ORISE designs characterization surveys using the data quality objectives process. This approach focuses on the particular objective of characterization, and ensures that only the data needed to address the characterization decisions are collected. Data collection efforts are

246

A survey of thin-film solar photovoltaic industry & technologies  

E-Print Network (OSTI)

A new type of solar cell technology using so-called thin-film solar photovoltaic material has the potential to make a great impact on our lives. Because it uses very little or no silicon at all, thin- film (TF) solar ...

Grama, Sorin

2007-01-01T23:59:59.000Z

247

Industrial Decision Making  

E-Print Network (OSTI)

Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy although, freight costs, favorable exchange rates and high capacity utilization will encourage future industrial investment. Industry will eventually enter a new period of major investment. Future industrial investment will be an opportunity to influence the energy efficiency of these facilities for generations to come. Program managers must begin engaging industrial customers now, in order to exploit this unprecedented opportunity to change future energy use patterns. This paper reviews recent market trends and industrial investment decision-making. The paper will also address several important questions: Why has industrial investment declined? What is the outlook for industrial investment? How can programs engage industry for future opportunities?

Elliott, R. N.; McKinney, V.; Shipley, A.

2008-01-01T23:59:59.000Z

248

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS 27 data.

249

Geochemical Journal, Vol. 39, pp. 383 to 389, 2005 *Corresponding author (e-mail: ytakaha@hiroshima-u.ac.jp)  

E-Print Network (OSTI)

383 Geochemical Journal, Vol. 39, pp. 383 to 389, 2005 *Corresponding author (e-mail: ytakaha@hiroshima,3 1 Department of Earth & Planetary Systems Science, Hiroshima University, Higashi-Hiroshima 739 for Multiple Isotope Research for Astro-and Geochemical Evolution (MIRAGE), Hiroshima University, Higashi-Hiroshima

250

Great Republic: a historical and archaeological analysis of a Pacific mail steamship  

E-Print Network (OSTI)

In 1986 the remains of a shipwreck were discovered on Sand Island in the mouth of the Columbia River in the Pacific Northwest. The following year, a team of archaeologists investigated the site in order to determine its original identity. After a series of dives, the team concluded that the wreck was the remains of the Hudsons Bay Company brig, Isabella, a ship that was lost in that area in 1830. Recent investigations on the shipwreck disproved this identity. The turbulent conditions of the Columbia River have helped researchers by shifting a significant amount of sand overburden away from the vessel, exposing a greater area of the ship. With this new information, the wreck is now believed to be the remains of the wooden side-wheel steamer Great Republic that belonged to the Pacific Mail Steamship Company, rather than Isabella. This thesis investigates the history of Great Republic and its role in American maritime history, as well as its possible archaeological remains at the bottom of the Columbia River. In order to provide a clear and concise story, I begin with the history of the Pacific Mail Steamship Company and its importance in the development of the western coast of the United States. Since Great Republic was integral to the Asian trade of the nineteenth century, the second portion of the thesis is dedicated to Asian-American commercial and political relations during the nineteenth century. Great Republic and its three sister ships are then described and analyzed in detail based on contemporary sources. Finally, the archaeological evidence is assessed beginning with the discovery of the wreck. I detail the investigations and discoveries made on the wreck over the last 20 years. In my conclusions I discuss the importance of Great Republic from a historical standpoint and emphasize its place in American maritime history. I also detail key aspects concerning the wreck that I believe are imperative for future research. Though the remains convincingly appear to be those of Great Republic there are still structural features that need to be analyzed before a positive identification is possible.

Roberts, Andrew Philip

2008-12-01T23:59:59.000Z

251

INFRASTRUCTURE SURVEY 2011  

E-Print Network (OSTI)

10 Appendices Appendix 1. Glossary of Terminology and Definitions 11 Appendix 2. Survey Definitions. There is a Glossary of Terminology and Definitions (Appendix 1). The survey form is Appendix 3 of this Report

252

California`s forest products industry: 1992. Forest Service resource bulletin  

SciTech Connect

The report presents the findings of a survey of primary forest products industries in California for 1992. The survey included the following sectors: Lumber, pulp and board; shake and shingle; export; and post, pole, and piling. Veneer and plywood mills are not included because they could not be presented without disclosng critical details. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed, and disposition of mill residence.

Ward, F.R.

1995-03-01T23:59:59.000Z

253

Oregon`s forest products industry: 1992. Forest Service resource bulletin  

SciTech Connect

The report presents the findings of a survey of primary forest products industries in Oregon for 1992. The survey included the following sectors; lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tables presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed, and disposition of mill residues.

Ward, F.R.

1995-03-01T23:59:59.000Z

254

Industrial production index forecast: Methods comparison  

Science Conference Proceedings (OSTI)

The purpose of this work is to investigate the suitability of different methods as short term forecast tools. It is studied and compared the application of the Kalman filter method with other forecasting methods when applied to a set of qualitative and quantitative information. The work data set is made of qualitative surveys of conjunture and the industrial production index (IPI). The objective is the attainment of short term forecast models for the Portuguese IPI of the transforming industry. After the previous treatment of the data

M. Filomena Teodoro

2012-01-01T23:59:59.000Z

255

C:MydocsMYDOCSHATTIERECS97recsForms97Mail.PDF  

U.S. Energy Information Administration (EIA) Indexed Site

B (1997) B (1997) Form Approval: OMB No.: 1905-0092 Nationwide Survey on Household Energy Use Expires: March 31, 2000 The numbers in parentheses are for office use only. This survey is being conducted for the U.S. Department of Energy by Response Analysis Corporation. The survey is voluntary and is authorized under the Federal Energy Administration Act of 1974 (Public Law 93-275), as amended. Information about specific households will be kept strictly confidential. The data will be summarized within large groupings for statistical purposes. We estimate that it will take 20 minutes to complete this questionnaire. Send comments regarding this estimate or any other aspects of this collection of information, including suggestions for reducing the length of this questionnaire, to the Energy Information

256

Utility FGD Survey, January--December 1989  

Science Conference Proceedings (OSTI)

The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

Hance, S.L.; McKibben, R.S.; Jones, F.M. (IT Corp., Cincinnati, OH (United States))

1992-03-01T23:59:59.000Z

257

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

258

Industrial | Open Energy Information  

Open Energy Info (EERE)

to: navigation, search Click to return to AEO2011 page AEO2011 Data From AEO2011 report . Market Trends Despite a 54-percent increase in industrial shipments, industrial energy...

259

America's Booming Wind Industry  

Energy.gov (U.S. Department of Energy (DOE))

Sharing key findings from two new Energy Department reports that highlight the record growth of America's wind industry.

260

The Copper Industry  

Science Conference Proceedings (OSTI)

...These products are sold to a wide variety of industrial users. Certain mill products??chiefly wire, cable, and most

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

NIST Industry Day 2012  

Science Conference Proceedings (OSTI)

... at www.fedbizopps.gov. Search NIST-AMD-INDUSTRY-DAY-2012 in the Quick Search engine. Deadline for registration ...

2013-08-30T23:59:59.000Z

262

Industrial Development Projects (Montana)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation authorizes municipalities and counties to issue bonds or interest coupons to finance industrial projects, including energy generation facilities.

263

Manufacturing Energy Consumption Survey (MECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

Manufacturing Energy Consumption Survey (MECS) Manufacturing Energy Consumption Survey (MECS) Glossary › FAQS › Overview Data 2010 2006 2002 1998 1994 1991 Archive Analysis & Projections MECS Industry Analysis Briefs Steel Industry Analysis The steel industry is critical to the U.S. economy. Steel is the material of choice for many elements of construction, transportation, manufacturing, and a variety of consumer products. It is the backbone of bridges, skyscrapers, railroads, automobiles, and appliances. Most grades of steel used today - particularly high-strength steels that are lighter and more versatile - were not available a decade ago. Chemical Industry Analysis The chemical industries are a cornerstone of the U.S. economy, converting raw materials such as oil, natural gas, air, water, metals, and minerals

264

Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

10 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive 10 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Data Methodology & Forms + EXPAND ALL Consumption of Energy for All Purposes (First Use) Table 1.1 By Mfg. Industry & Region (physical units) XLS PDF Table 1.2 By Mfg. Industry & Region (trillion Btu) XLS PDF Table 1.3 By Value of Shipments & Employment Size Category & Region XLS PDF Table 1.5 By Further Classification of "Other" Energy Sources XLS PDF Energy Used as a Nonfuel (Feedstock) Table 2.1 By Mfg. Industry & Region (physical units) XLS PDF Table 2.2 By Mfg. Industry & Region (trillion Btu) XLS PDF Table 2.3 By Value of Shipments & Employment Size Category XLS PDF Energy Consumption as a Fuel Table 3.1 By Mfg. Industry & Region (physical units) XLS PDF

265

Environmental Survey preliminary report  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

Not Available

1988-04-01T23:59:59.000Z

266

California Industrial Energy Efficiency Potential  

SciTech Connect

This paper presents an overview of the modeling approach andhighlights key findings of a California industrial energy efficiencypotential study. In addition to providing estimates of technical andeconomic potential, the study examines achievable program potential undervarious program-funding scenarios. The focus is on electricity andnatural gas savings for manufacturing in the service territories ofCalifornia's investor-owned utilities (IOUs). The assessment is conductedby industry type and by end use. Both crosscutting technologies andindustry-specific process measures are examined. Measure penetration intothe marketplace is modeled as a function of customer awareness, measurecost effectiveness, and perceived market barriers. Data for the studycomes from a variety of sources, including: utility billing records, theEnergy Information Association (EIA) Manufacturing Energy ConsumptionSurvey (MECS), state-sponsored avoided cost studies, energy efficiencyprogram filings, and technology savings and cost data developed throughLawrence Berkeley National Laboratory (LBNL). The study identifies 1,706GWh and 47 Mth (million therms) per year of achievable potential over thenext twelve years under recent levels of program expenditures, accountingfor 5.2 percent of industrial electricity consumption and 1.3 percent ofindustrial natural gas consumption. These estimates grow to 2,748 GWh and192 Mth per year if all cost-effective and achievable opportunities arepursued. Key industrial electricity end uses, in terms of energy savingspotential, include compressed air and pumping systems that combine toaccount for about half of the total achievable potential estimates. Fornatural gas, savings are concentrated in the boiler and process heatingend uses, accounting for over 99 percent to total achievablepotential.

Coito, Fred; Worrell, Ernst; Price, Lynn; Masanet, Eric; RafaelFriedmann; Rufo, Mike

2005-06-01T23:59:59.000Z

267

Transforming the Oil Industry into the Energy Industry  

E-Print Network (OSTI)

innovation and lets industry pick winning technologies. TheTransforming the Oil Industry intothe Energy Industry BY DANIEL SPERLING AND SONIA YEH A C C E

Sperling, Daniel; Yeh, Sonia

2009-01-01T23:59:59.000Z

268

From Industry Protection to Industry Promotion: IT Policy in Brazil  

E-Print Network (OSTI)

Brazilian banking automation industry. Science, TechnologyBrazilian liberalisation of the IT industry on technologicalWorking paper. Computer Industry Almanac, Inc. (1999).

Botelho, Antonio Jose Junqueira; Dedrick, Jason; Kraemer, Kenneth L.; Tigre, Paulo Bastos

1999-01-01T23:59:59.000Z

269

Artin Der Minassians1 e-mail: artin.der.minassians@gmail.com  

E-Print Network (OSTI)

of Natural Sciences Fax: +44 (0) 1786 467 641 University of Stirling Email: kristen.knowles@stir.ac.uk FK9 4 of Stirling Stirling, UK September 2010 to present, PhD Research Student in Psychology Behaviour, Psychomorph, DI3D. Extensive sound engineering experience. Web-based survey expertise using Qualtrics

Sanders, Seth

270

Infrared Surveys for AGN  

E-Print Network (OSTI)

From the earliest extragalactic infrared studies AGN have shown themselves to be strong infrared sources and IR surveys have revealed new populations of AGN. I briefly review current motivations for AGN surveys in the infrared and results from previous IR surveys. The Luminous Infrared Galaxies, which in some cases house dust-enshrouded AGN, submillimeter surveys, and recent studies of the cosmic x-ray and infrared backgrounds suggest that there is a population of highly-obscured AGN at high redshift. ISO Surveys have begun to resolve the infrared background and may have detected this obscured AGN population. New infrared surveys, particularly the SIRTF Wide-area Infrared Extragalactic Legacy Survey (SWIRE), will detect this population and provide a platform for understanding the evolution of AGN, Starbursts and passively evolving galaxies in the context of large-scale structure and environment.

Smith, H E

2002-01-01T23:59:59.000Z

271

Infrared Surveys for AGN  

E-Print Network (OSTI)

From the earliest extragalactic infrared studies AGN have shown themselves to be strong infrared sources and IR surveys have revealed new populations of AGN. I briefly review current motivations for AGN surveys in the infrared and results from previous IR surveys. The Luminous Infrared Galaxies, which in some cases house dust-enshrouded AGN, submillimeter surveys, and recent studies of the cosmic x-ray and infrared backgrounds suggest that there is a population of highly-obscured AGN at high redshift. ISO Surveys have begun to resolve the infrared background and may have detected this obscured AGN population. New infrared surveys, particularly the SIRTF Wide-area Infrared Extragalactic Legacy Survey (SWIRE), will detect this population and provide a platform for understanding the evolution of AGN, Starbursts and passively evolving galaxies in the context of large-scale structure and environment.

Harding E. Smith

2002-03-06T23:59:59.000Z

272

2010 Georgia Manufacturing Survey  

Science Conference Proceedings (OSTI)

... Linked to Innovation Manufacturing Wages by Percentages of Respondents ... Manufacturing Strategies by Industry Group (Percentage of firms ...

2013-07-31T23:59:59.000Z

273

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry banner Industry banner Neutron scattering research has applications in practically every field, and neutron research at ORNL is leading to productive partnerships with the industrial and business communities. We welcome proposals for all types of research, including those involving proprietary work. Recent studies have led to discoveries with potential applications in fields such as medicine, energy, and various metals technologies. For more information, please see our recent research highlights. Research Collaborations Industry-Driven Research Benefits Plastics Manufacturing Corning uses VULCAN to test limits of ceramic material for car emission controls, filtration devices Neutrons Probe Inner Workings of Batteries Industry and Neutron Science: Working To Make a Match

274

Waste Heat Management Options: Industrial Process Heating Systems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heat Management Options Heat Management Options Industrial Process Heating Systems By Dr. Arvind C. Thekdi E-mail: athekdi@e3minc.com E3M, Inc. August 20, 2009 2 Source of Waste Heat in Industries * Steam Generation * Fluid Heating * Calcining * Drying * Heat Treating * Metal Heating * Metal and Non-metal Melting * Smelting, agglomeration etc. * Curing and Forming * Other Heating Waste heat is everywhere! Arvind Thekdi, E3M Inc Arvind Thekdi, E3M Inc 3 Waste Heat Sources from Process Heating Equipment * Hot gases - combustion products - Temperature from 300 deg. F. to 3000 deg.F. * Radiation-Convection heat loss - From temperature source of 500 deg. F. to 2500 deg. F. * Sensible-latent heat in heated product - From temperature 400 deg. F. to 2200 deg. F. * Cooling water or other liquids - Temperature from 100 deg. F. to 180 deg. F.

275

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Print Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

276

e-mail: elperin@menix.bgu.ac.il Department of Mechanical Engineering,  

E-Print Network (OSTI)

developed a theoretical model of a novel thermal laser shock method for separation of glass and glass-ceramic.1115/1.1649245 Introduction High quality separation of nonmetallic e.g., glass, glass- ceramic wafers into chips is of great significance in electronic industry. Since chips often operate at large thermal loadings, high quality

Elperin, Tov

277

Survey of Emerging Nondestructive Evaluation Technologies  

Science Conference Proceedings (OSTI)

Four emerging nondestructive evaluation (NDE) technologies were surveyed in this report for potential applications in the electric power industry. Some of them are new, and others have experienced renewed interest based on recent technical improvements. These four NDE technologies are phased array curvature correction, guided wave focusing and imaging, laser shearography, and acoustic camera. For each of these technologies, this report provides background information, challenges, technical solutions, pot...

2012-03-30T23:59:59.000Z

278

Tobacco Industry Involvement in Colorado  

E-Print Network (OSTI)

Accessed May 25, 2004) Industry Summary. 1992 (est. ).11 May 2004) Tobacco Industry Involvement in Colorado Pageor (800) LUNG-USA. Tobacco Industry Involvement in Colorado

Landman, BA, Anne; Bialick, Peter

2004-01-01T23:59:59.000Z

279

For Industry | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

R&D accelerates battery technology | More news Home | Connect with ORNL | For Industry For Industry | For Industry SHARE There are a few different way of "working" with...

280

Optoelectronics Industry Development Association  

Science Conference Proceedings (OSTI)

... those systems that meet final demand are information ... One survey found that 45 percent of respondents ... there was a tremendous response from the ...

2010-10-05T23:59:59.000Z

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

PIA - Industry Interactive Procurement System (IIPS) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industry Interactive Procurement System (IIPS) PIA - Industry Interactive Procurement System (IIPS) PIA - Industry Interactive Procurement System (IIPS) PIA - Industry Interactive...

282

Industrial | OpenEI  

Open Energy Info (EERE)

Industrial Industrial Dataset Summary Description The Industrial Assessment Centers (IAC) Database is a collection of all the publicly available data from energy efficiency assessments conducted by IACs at small and medium-sized industrial facilities. Source Department of Energy Industrial Assessment Centers Date Released September 20th, 2012 (2 years ago) Date Updated September 20th, 2012 (2 years ago) Keywords assessment energy efficiency Industrial manufacturing small and medium-sized Data application/vnd.ms-excel icon copy_of_iac_database.xls (xls, 28.7 MiB) Quality Metrics Level of Review Standards Comment Temporal and Spatial Coverage Frequency Daily Time Period License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset

283

Berkeley Lab Postdoc Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Founded in 1983, MOR Associates has led dozens of major survey efforts on behalf of higher education, such as UC Berkeley, MIT, Stanford University, University of Washington,...

284

ORISE: Characterization surveys  

NLE Websites -- All DOE Office Websites (Extended Search)

extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental aspect of all D&D projects, characterization surveys provide...

285

The Dark Energy Survey  

Science Conference Proceedings (OSTI)

A new proposed optical?near infrared survey of 5000 square degrees of the South Galactic Cap is presented. To perform it

E. Snchez; Dark Energy Survey Collaboration

2006-01-01T23:59:59.000Z

286

Nuclear dual-purpose plants for industrial energy  

SciTech Connect

One of the major obstacles to extensive application of nuclear power to industrial heat is the difference between the relatively small energy requirements of individual industrial plants and the large thermal capacity of current power reactors. A practical way of overcoming this obstacle would be to operate a centrally located dual-purpose power plant that would furnish process steam to a cluster of industrial plants, in addition to generating electrical power. The present study indicates that even relatively remote industrial plants could be served by the power plant, since it might be possible to convey steam economically as much as ten miles or more. A survey of five major industries indicates a major potential market for industrial steam from large nuclear power stations.

Klepper, O.H.

1976-01-01T23:59:59.000Z

287

South Dakota timber industry: An assessment of timber product output and use, 1993. Forest Service resource bulletin  

SciTech Connect

Reports findings of a survey of all primary wood-using mills in South Dakota in 1993 and compares those findings with earlier surveys. Reports production and receipts of industrial roundwood by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by South Dakota`s primary wood-using industry.

Hackett, R.L.; Sowers, R.A.

1996-10-04T23:59:59.000Z

288

Industrial Partnerships Office  

Industrial Partnerships Office 6/13 Richard Rankin Director----Roger Werne Deputy Director-----Yvonne King Administrator Nina Potter Manager Intellectual Property

289

Industrial Waste Generation  

NLE Websites -- All DOE Office Websites (Extended Search)

9) Page 2 of 7 Industrial Waste Generation Work with Engineered Nanomaterials Power Consumption Historical Contamination (groundwater, soil) Hazardous Waste Generation Atmospheric...

290

Construction Industry Software  

Science Conference Proceedings (OSTI)

... Translates a CIS/2 (CIMsteel Integration Standards) file into a 3D interactive VRML model of a steel structure or an IFC (Industry Foundation Classes ...

2012-04-23T23:59:59.000Z

291

Search - Industrial Partnerships Office  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore ...

292

Technologies - Industrial Partnerships Office  

Energy, Utilities, & Power Systems. Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988

293

Industrial Energy Efficiency Assessments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Energy Efficiency Assessments Lynn Price Staff Scientist China Energy Group Energy Analysis Department Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Industrial Energy Efficiency Assessments - Definition and overview of key components - International experience - Chinese situation and recommendations - US-China collaboration Industrial Energy Efficiency Assessments - Analysis of the use of energy and potential for energy efficiency in an industrial facility * Current situation * Recommendations for improving energy efficiency * Cost-benefit analysis of recommended options * An action plan for realizing potential savings Types of Industrial Energy Efficiency Assessments - Preliminary or walk-through - Detailed or diagnostic Audit criteria

294

OpenEI - Industrial  

Open Energy Info (EERE)

renewable energy consumption (in quadrillion btu) for electricity generation in the United States by energy use sector (commercial, industrial and electric power) and by...

295

The Effects Of Port Security Compliance On The Competitiveness Of European Union Maritime Industry Firms  

E-Print Network (OSTI)

ABSTRACT The Effects Of Port Security Compliance On The Competitiveness Of European Union Maritime Industry Firms. (May 2013) Jonathan Stone Department of Maritime Administration Texas A&M University Research Advisor: Dr. Joan Mileski Department of Maritime Administration Prior research has addressed European Union (EU) water transportation policy and its impact on firm strategy. We extend this research by attempting to measure the effect of port security regulation compliance implementation on the perceived competitiveness of maritime firms located in European Union ports. We ask the question: Can firm specific implementation of required port security compliance enhance or hinder a firms competitive advantage? We use Resource-Based Strategic Theory as a framework for evaluating competitiveness. Resource based theory purports that assets and systems can give a firm a competitive advantage if they follow the VRIN criteria of Valuable, Rare, Inimitable, and Not easily substitutable. We ask via email and snail mail survey instrument whether certain security assets, resources and systems are VRIN and whether these assets, resources and systems give competitive advantage to the firm. The type of resources/assets/systems include physical assets such as fencing; ongoing management assets such as communication systems, planning and structuring management assets such as security planning systems; human assets such as employee knowledge; technological assets such as software protection; intangible assets such as a safety culture and financial assets such as cost savings from security compliance. We administer the instrument to all firms operating in EU ports in 2011-2012. A list of firms is obtained from IHSfairplay Ports and Terminals Guide. The results of the survey shows that most managers do not perceive a competitive advantage was gained in the way security assets/resources/management systems were implemented. However, a strong minority 34.12% of managers did perceive competitive advantage was gained from port security compliance where systems/assets/resources were not easily imitated or the I. Furthermore, managers perceive where they were located within the port as an important advantage to security and competitiveness.

Stone, Jonathan Taylor

2013-05-01T23:59:59.000Z

296

Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

2 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive 2 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Data Methodology & Forms all tables + EXPAND ALL Consumption of Energy for All Purposes (First Use) Values RSE Table 1.1 By Mfg. Industry & Region (physical units) XLS PDF XLS Table 1.2 By Mfg. Industry & Region (trillion Btu) XLS PDF XLS Table 1.3 By Value of Shipments & Employment Size Category & Region XLS PDF Table 1.4 Number of Establishments Using Energy Consumed for All Purpose XLSPDF Table 1.5 By Further Classification of "Other" Energy Sources XLS PDF Energy Used as a Nonfuel (Feedstock) Values RSE Table 2.1 By Mfg. Industry & Region (physical units) XLS PDF XLS Table 2.2 By Mfg. Industry & Region (trillion Btu) XLS PDF XLS Table 2.3 By Value of Shipments & Employment Size Category XLS PDF

297

E-mail: ceas-adv@UWM.edu Website: www.uwm.edu/CEAS Phone: (414) 229-4667 INDUSTRIAL ENGINEERING  

E-Print Network (OSTI)

and a biogas power plant. Through field trips and hands-on projects, engineering students are offered

Saldin, Dilano

298

REMOTE SENSING GEOLOGICAL SURVEY  

E-Print Network (OSTI)

REMOTE SENSING IN GEOLOGICAL SURVEY OF BRAZIL August/2010 Mônica Mazzini Perrotta Remote Sensing Division Head #12;SUMMARY The Geological Survey of Brazil mission The Remote Sensing Division Main remote, Paleontology, Remote Sensing Director of Hydrology and Land Management But Remote Sensing Division gives

299

Utility Baghouse Survey 2009  

Science Conference Proceedings (OSTI)

EPRI conducted comprehensive surveys of utility baghouse installations in 1981, 1991, and 2005 to summarize the state of the technology. The current survey focuses on nine selected pulse-jet baghouses to provide a better understanding of the design, performance, and operation of recent installations.

2009-12-14T23:59:59.000Z

300

NASA Customer Satisfaction Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Satisfaction Survey Customer Satisfaction Survey NASA's Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC) would like to encourage you to participate in the NASA ESDIS 2013 American Customer Satisfaction Survey. The ORNL DAAC is one of twelve data centers sponsored by NASA's Earth Science Data and Information System (ESDIS) project. The ESDIS project uses the results of this survey to evaluate our success and to determine where improvements are needed. Invitations will be sent to you, our users, from CFI Group [CFI Group on behalf of NASA (NASA@jangomail.com)] during the week of August 20, 2013. Each invitation will reference us as "ORNL DAAC / FLUXNET", and contain a unique secure link to this Web-based anonymous survey. We encourage you to participate!

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Building Technologies Residential Survey  

SciTech Connect

Introduction A telephone survey of 1,025 residential occupants was administered in late October for the Building Technologies Program (BT) to gather information on residential occupant attitudes, behaviors, knowledge, and perceptions. The next section, Survey Results, provides an overview of the responses, with major implications and caveats. Additional information is provided in three appendices as follows: - Appendix A -- Summary Response: Provides summary tabular data for the 13 questions that, with subparts, comprise a total of 25 questions. - Appendix B -- Benchmark Data: Provides a benchmark by six categories to the 2001 Residential Energy Consumption Survey administered by EIA. These were ownership, heating fuel, geographic location, race, household size and income. - Appendix C -- Background on Survey Method: Provides the reader with an understanding of the survey process and interpretation of the results.

Secrest, Thomas J.

2005-11-07T23:59:59.000Z

302

Recent developments: Industry briefs  

SciTech Connect

This article is the `Industry Briefs` portion of the March 1992 `Recent Developments` section of Nuexco. Specific issues mentioned are: (1) closure of Yankee Rowe, (2) steam-generator tube plugging at Trojan, (3) laser enrichment in South Africa, (4) the US uranium industry, (5) planning for two nuclear units in Taiwan, and (6) the establishment of a Czech/French joint venture.

NONE

1992-03-01T23:59:59.000Z

303

Geothermal industry assessment  

DOE Green Energy (OSTI)

An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

Not Available

1980-07-01T23:59:59.000Z

304

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry and Neutron Science Industry and Neutron Science Industry and Neutron Science: Working To Make a Match "In fundamental research, we want to know everything. Industry wants to know enough to answer a question." Research Contact: Mike Crawford September 2011, Written by Deborah Counce Mike Crawford and Souleymane Diallo Mike Crawford of Dupont (right) and Souleymane Diallo, instrument scientist for the Backscattering Spectrometer at SNS, prepare a material sample for an experiment on the instrument. Industrial users are starting to eye the potential of neutron science for solving problems that can't be solved in any other way. At the same time, the SNS and HFIR neutron science facilities at ORNL are exploring ways to woo such users and to make a match of it, to the benefit of both.

305

Uranium industry annual 1996  

SciTech Connect

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

NONE

1997-04-01T23:59:59.000Z

306

Case Study of the California Cement Industry  

SciTech Connect

California is the largest cement producing state in theU.S., accounting for between 10 percent and 15 percent of U.S. cementproduction and cement industry employment. The cement industry inCalifornia consists of 31 sites that consume large amounts of energy,annually: 1,600 GWh of electricity, 22 million therms of natural gas, 2.3million tons of coal, 0.25 tons of coke, and smaller amounts of wastematerials, including tires. The case study summarized in this paperfocused on providing background information, an assessment ofenergy-efficiency opportunities and barriers, and program recommendationsthat can be used by program planners to better target products to thecement industry. The primary approach to this case study involvedwalk-through surveys of customer facilities and in depth interviews withcustomer decision makers and subsequent analysis of collected data. Inaddition, a basic review of the cement production process was developed,and summary cement industry energy and economic data were collected, andanalyzed. The analysis of secondary data provides background informationon the cement industry and identification of potential energy-efficiencyopportunities. The interviews provide some understanding of the customerperspective about implementation of energy-efficiencyprojects.

Coito, Fred; Powell, Frank; Worrell, Ernst; Price, Lynn; Friedmann, Rafael

2005-05-01T23:59:59.000Z

307

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Jun Wang Physicist, Industrial Program Coordinator Phone: 344-2661 Email: junwang@bnl.gov Jun Wang is an Industrial Program Coordinator in the Photon Science Directorate at Brookhaven National Laboratory. She is working closely with industrial researchers as well as beamline staff to identify and explore new opportunities in industrial applications using synchrotron radiation. She has been leading the industrial research program including consultation, collaboration and outreach to the industrial user groups. Before joining BNL in 2008, Jun Wang was a Lead Scientist for a high-resolution high throughput powder diffraction program at the Advanced Photon Source (APS). As a Physicist at BNL, her research focuses on materials structure determination and evolution. Her expertise covers wide range x-ray techniques such as thin film x-ray diffraction and reflectivity, powder diffraction, small angle x-ray scattering, protein solution scattering and protein crystallography, as well as x-ray imaging. Currently she is the project leader of a multi-million dollar project on transmission x-ray microscopy recently funded by the U.S. DOE and the spokesperson for this new imaging beamline at the NSLS. She has also been collaborating with universities and industries for several projects on energy research at the NSLS.

308

NEXRAD and the Broadcast Weather Industry: Preparing to Share the Technology  

Science Conference Proceedings (OSTI)

This paper describes results from a survey designed to establish the current level of radar and computer technology of the television weather industry, and to assess the awareness and attitudes of television weather forecasters toward the Next ...

Michele M. Robertson; Kelvin K. Droegemeier

1990-01-01T23:59:59.000Z

309

A guide to surveys of motor vehicle fleets  

DOE Green Energy (OSTI)

In response to directives in Section 407 of the Energy Policy Act of 1992 (EPACT), the Energy Information Administration (EIA) developed a data collection program designed to provide information useful to persons interested in the alternative fuels market. The target audience includes those seeking to manufacture, convert, sell, own, or operate alternative-fuel vehicles (AFVs) or alternative fueling facilities. Among the various projects EIA conducted as part of this data collection program were two fleet surveys conducted in Department of Energy-designated Clean Cities. The Clean Cities program is a locally-based government/industry partnership coordinated by the Department of Energy to expand the use of alternative transportation fuels. These surveys were designed to collect a broad range of information regarding the fleets and fleet vehicles in operation in the Atlanta, Georgia and Denver, Colorado areas. One of the objectives of these surveys was to attempt to identify and describe the market for AFVs. Due to inherent limitations associated with AFVs and limited alternative-fuel infrastructure, it`s believed that the first practical applications for AFVs will be within private and government fleets. Another objective in conducting the Clean Cities Fleet surveys was to develop a useful methodology for accessing and surveying private and municipal fleets that would aid other interested parties in conducting similar surveys. This report is intended to provide a description of how EIA gathered information on private and municipal fleets, but the basic survey design could be used to design surveys of other difficult-to-access populations. There are 3 basic steps to any survey: define the target population, constructing the survey frame, and implementing the survey. The procedures outlined in this report are, for the most part, the procedures used for the fleet survey conducted in Denver. The major changes between the two surveys are described in Appendix A.

NONE

1996-11-01T23:59:59.000Z

310

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W. (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

1998-01-01T23:59:59.000Z

311

Industrial Process Surveillance System  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

2001-01-30T23:59:59.000Z

312

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

1998-06-09T23:59:59.000Z

313

Via E-mail to ERS2014@eia.gov Ms. Rebecca Peterson U. S. Energy Information Administration  

Gasoline and Diesel Fuel Update (EIA)

of the Northwest Balancing Authorities of the Northwest Balancing Authorities Page 1 of 6 May 6, 2013 Via E-mail to ERS2014@eia.gov Ms. Rebecca Peterson U. S. Energy Information Administration U. S. Department of Energy Re: Comments on Proposed Form EIA-930 "Balancing Authority Operations Report" Avista Corporation ("Avista"), Portland General Electric Company ("PGE"), NorthWestern Energy, Puget Sound Energy ("PSE"), Seattle City Light, Chelan PUD, and Tacoma Power (collectively, "Northwest Balancing Authorities" or "Northwest BAs") appreciate the opportunity to make comments on the

314

Generalized survey propagation  

Science Conference Proceedings (OSTI)

Survey propagation (SP) has recently been discovered as an efficient algorithm in solving classes of hard constraint-satisfaction problems (CSP). Powerful as it is, SP is still a heuristic algorithm, and further understanding its algorithmic nature, ...

Ronghui Tu / Yongyi Mao, Jiying Zhao

2011-01-01T23:59:59.000Z

315

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n tal Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope oc:c:urs, Project Lead must submit a new NEPA Compliance Survey and contact the Technical...

316

Site Energy Surveys  

E-Print Network (OSTI)

Operating improvements and selected investments have already improved US refining and petrochemical energy utilization efficiency by about 20%, compared to 1972 operating efficiencies. This is equivalent to saving well over 250,000 B/D of crude; which is equal to the output of several major synthetic fuels projects! Site Energy Surveys can be an important technique for achieving the next major increment (1520%) in energy savings, even when using existing technology. These surveys encompass the total site, all associated plants, and investigate all aspects of energy requirements, heat integration configurations, steam/power cogeneration possibilities and inefficient practices. After potential energy conservation opportunities have been identified, screening is conducted to develop their economic attractiveness. This presentation reviews factors leading to the need for Site Energy Surveys, the objectives for conducting surveys, the approach utilized, considerations given to values of energy and concludes with overall improvements achieved.

Lockett, W., Jr.; Guide, J. J.

1981-01-01T23:59:59.000Z

317

Evaluating Our Instruction: Surveys  

E-Print Network (OSTI)

you put in; and as the grandest mill in the world will not extract wheat flour from peascod, so pagesEvaluating Our Instruction: Surveys Mathematics may be compared to a mill of exquisite workmanship

Maryland at College Park, University of

318

Argonne CNM: Industrial Users  

NLE Websites -- All DOE Office Websites (Extended Search)

For Industrial Users For Industrial Users The Center for Nanoscale Materials (CNM) has specific interest in growing the industrial user program and encourages researchers in industry to consider the capabilities and expertise we have to offer. As a CNM user, you have easy access to sophisticated scientific instrumentation geared toward nanoscience and nanotechnology. Moreover, our widely recognized staff researchers offer support in designing your experiments, using the equipment, and analyzing your data. Access to the CNM is through peer review of user proposals. Before you submit your first user proposal, we encourage you to contact any of our staff researchers, group leaders, the User Office, or division management to discuss the feasibility of your intended research using the expertise and facilities at the CNM. We are here to serve you as part of our user community and will be happy to address any questions you might have.

319

Electric Utility Industry Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Utility Industry Update Electric Utility Industry Update Steve Kiesner Director, National Customer Markets Edison Electric Institute FUPWG Spring 2012 April 12, 2012 Edison Electric Institute  Investor-Owned Electric Companies  Membership includes  200 US companies,  More than 65 international affiliates and  170 associates  US members  Serve more than 95% of the ultimate customers in the investor-owned segment of the industry and  Nearly 70% of all electric utility ultimate customers, and  Our mission focuses on advocating public policy; expanding market opportunities; and providing strategic business information Agenda Significant Industry Trends Utility Infrastructure Investments Generation and Fuel Landscape

320

Industry | OpenEI  

Open Energy Info (EERE)

Industry Industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by other industries and construction. Data is only available for Paraguay and the U.S., years 2000 to 2007. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption Industry UN Data application/zip icon XML (zip, 514 bytes) application/zip icon XLS (zip, 425 bytes) Quality Metrics

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Former User Group Chair Enthusiastic About Relevance of Neutron Scattering Former User Group Chair Enthusiastic About Relevance of Neutron Scattering to Industrial Research Former User Group Chair Mike Crawford Mike Crawford, DuPont Research and Development. The drive is intensifying to encourage research partnerships between Neutron Sciences and private industry. Such partnerships, a long-term strategic goal set by the DOE's Basic Energy Sciences Advisory Committee, will deliver industry and its technological problems to SNS and HFIR, where joint laboratory-industry teams can use the unparalleled resources available here to resolve them. "SNS is a tremendous facility. It has the potential to have a couple of thousand user visits a year and, if they build another target station in the future, you're probably talking about 4000 user visits a year,"

322

Industrial Oil Products Division  

Science Conference Proceedings (OSTI)

A forum for professionals involved in research, development, engineering, marketing, and testing of industrial products and co-products from fats and oils, including fuels, lubricants, coatings, polymers, paints, inks, cosmetics, dielectric fluids, and ad

323

Industrial Demand Module  

Reports and Publications (EIA)

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

Kelly Perl

2013-05-14T23:59:59.000Z

324

Optimization of Industrial Enzymes  

Enzymes are highly efficient naturally occurring catalysts that are used in a wide range of applications from industrial processes to new drug development. Conventional mechanism for understanding the mechanisms of enzyme functions are costly and time ...

325

Technologies - Industrial Partnerships Office  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore National Security, LLC ...

326

Electric Power Industry Restructuring:  

U.S. Energy Information Administration (EIA)

Good morning. I was asked to speak to you today about EIAs data collection efforts in a more competitive electric power industry. I know that you want to hear ...

327

Uranium Industry Annual, 1992  

Science Conference Proceedings (OSTI)

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

Not Available

1993-10-28T23:59:59.000Z

328

Industrial Demand Module  

Reports and Publications (EIA)

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

Kelly Perl

2013-09-30T23:59:59.000Z

329

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Hidden Stresses in Materials HTML, HFIR Team Work with Industry To Find Hidden Stresses in Materials Metalsa, EPRI, John Deere among partners in high-impact projects Whether it's...

330

Industrial Assessment Center  

SciTech Connect

The University of Dayton (UD) performed energy assessments, trained students and supported USDOE objectives. In particular, the UD Industrial Assessment Center (IAC) performed 96 industrial energy assessment days for mid-sized manufacturers. The average identified and implemented savings on each assessment were $261,080 per year and $54,790 per year. The assessments served as direct training in industrial energy efficiency for 16 UD IAC students. The assessments also served as a mechanism for the UD IAC to understand manufacturing energy use and improve upon the science of manufacturing energy efficiency. Specific research results were published in 16 conference proceedings and journals, disseminated in 22 additional invited lectures, and shared with the industrial energy community through the UD IAC website.

J. Kelly Kissock; Becky Blust

2007-04-17T23:59:59.000Z

331

Working Through Outsourcing: Software Practice, Industry Organization and Industry Evolution in India  

E-Print Network (OSTI)

Outsourcing: Software Practice, Industry Organizationand Industry Evolution in India Kyle EischenSoftware Practice, Industry Organization and Industry

Eischen, Kyle

2004-01-01T23:59:59.000Z

332

CSEM WP 112 Consumer Choice and Industrial Policy  

E-Print Network (OSTI)

residential natural gas market and examine responses to a specially commissioned survey of nearly seven the UK domestic natural gas market1 As such, it provides a useful example of the developmentCSEM WP 112 Consumer Choice and Industrial Policy: A Study of UK Energy Markets Monica Giulietti

California at Berkeley. University of

333

North Shore Gas - Commercial and Industrial Prescriptive Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

North Shore Gas - Commercial and Industrial Prescriptive Rebate North Shore Gas - Commercial and Industrial Prescriptive Rebate Program North Shore Gas - Commercial and Industrial Prescriptive Rebate Program < Back Eligibility Commercial Savings Category Heating & Cooling Commercial Heating & Cooling Heating Other Commercial Weatherization Manufacturing Appliances & Electronics Water Heating Maximum Rebate Contact North Shore Gas Program Info Expiration Date 05/31/2013 State Illinois Program Type Utility Rebate Program Rebate Amount Steam Traps (Low Pressure): $60/unit Steam Traps (High Pressure): $150/unit Industrial/Process Steam Trap (Low Pressure): $150 Industrial/Process Steam Trap (High Pressure): $200 HVAC Steam Trap Test: $5/unit surveyed Condensing Unit Heater: $2/MBH Boilers: $2 - $6.67/MBH Boiler Cutout/Reset Control: $250

334

Materials Reliability Program: Inspection Data Survey Report (MRP-219, revision 8)  

Science Conference Proceedings (OSTI)

This document provides summaries and details of inspection data collected from U.S. Pressurized Water Reactors (PWRs) in response to a biannual survey conducted by the Electric Power Research Institutes (EPRIs) Materials Reliability Program (MRP). This revision includes results through fall 2011. The results of the MRP surveys have informed industry practices and prompted mitigative actions, the results of which are already reflected in the current industry ...

2012-12-23T23:59:59.000Z

335

Innovative Utility Pricing for Industry  

E-Print Network (OSTI)

The electric utility industry represents only one source of power available to industry. Although the monopolistic structure of the electric utility industry may convey a perception that an electric utility is unaffected by competition, this is an erroneous perception with regard to industry. Electric utilities face increased competition, both from other utilities and from industrial self-generation. The paper discusses competition for industrial customers and innovative pricing trends that have evolved nationally to meet the growing competition for industrial sales. Cogeneration activities and the emerging concepts of wheeling power are also discussed. Specifics of industry evaluation and reaction to utility pricing are presented. Also enumerated are examples of the response various utilities throughout the United States have made to the needs of their industrial customers through innovative rate design. Industry/utility cooperation can result in benefits to industry, to the electric utility and to all other ratepayers. This discussion includes examples of successful cooperation between industry and utilities.

Ross, J. A.

1986-06-01T23:59:59.000Z

336

Human computation: a survey and taxonomy of a growing field  

Science Conference Proceedings (OSTI)

The rapid growth of human computation within research and industry has produced many novel ideas aimed at organizing web users to do great things. However, the growth is not adequately supported by a framework with which to understand each new system ... Keywords: crowdsourcing, data mining, human computation, literature review, social computing, survey, taxonomy

Alexander J. Quinn; Benjamin B. Bederson

2011-05-01T23:59:59.000Z

337

Advanced technology options for industrial heating equipment research  

Science Conference Proceedings (OSTI)

This document presents a strategy for a comprehensive program plan that is applicable to the Combustion Equipment Program of the DOE Office of Industrial Technologies (the program). The program seeks to develop improved heating equipment and advanced control techniques which, by improvements in combustion and beat transfer, will increase energy-use efficiency and productivity in industrial processes and allow the preferred use of abundant, low grade and waste domestic fuels. While the plan development strategy endeavors to be consistent with the programmatic goals and policies of the office, it is primarily governed by the needs and concerns of the US heating equipment industry. The program, by nature, focuses on energy intensive industrial processes. According to the DOE Manufacturing Energy Consumption Survey (MECS), the industrial sector in the US consumed about 21 quads of energy in 1988 in the form of coal, petroleum, natural gas and electricity. This energy was used as fuels for industrial boilers and furnaces, for agricultural uses, for construction, as feedstocks for chemicals and plastics, and for steel, mining, motors, engines and other industrial use over 75 percent of this energy was consumed to provide heat and power for manufacturing industries. The largest consumers of fuel energy were the primary metals, chemical and allied products, paper and allied products, and stone, clay and glass industry groups which accounted for about 60% of the total fuel energy consumed by the US manufacturing sector.

Jain, R.C.

1992-10-01T23:59:59.000Z

338

Baseline study of US industry solar exports  

DOE Green Energy (OSTI)

This study is a detailed aggregate profile of US solar export activity in 1979 based on a survey of all segments of the solar industry. It identifies the dollar volume of exports by technology: (1) solar heating and cooling products; (2) wind products; (3) photovoltaics; (4) solar thermal electric; (5) OTEC and biomass; and (6) support products and services. The study offers to government and industry groups, for the first time, comprehensive information with which to formulate export goals and assistance measures based on the current realities of the solar export marketplace. Specific and aggregate recommendations which can lead to identification of realistic solar export opportunities and development of solar export markets are included.

Jacobius, T M; Levi, R S; Bereny, J A

1980-10-01T23:59:59.000Z

339

California Industrial Energy Efficiency Potential  

E-Print Network (OSTI)

The Potential for Energy Efficiency. Prepared for The EnergyIndustrial Sector Energy Efficiency Potential Study - DraftIndustrial Energy Efficiency Market Characterization Study.

Coito, Fred; Worrell, Ernst; Price, Lynn; Masanet, Eric; Rafael Friedmann; Rufo, Mike

2005-01-01T23:59:59.000Z

340

Industrial Technologies - Energy Innovation Portal  

Industrial Technologies Marketing Summaries Here youll find marketing summaries of industrial technologies available for licensing from U.S. Department of Energy ...

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

EIA Electric Industry Data Collection  

U.S. Energy Information Administration (EIA)

Steam Production EIA Electric Industry Data Collection Residential Industrial ... Monthly data on cost and quality of fuels delivered to cost-of-service plants

342

NEMS industrial module documentation report  

SciTech Connect

The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

1994-01-01T23:59:59.000Z

343

> FAQs for Survey Form EIA-888  

Gasoline and Diesel Fuel Update (EIA)

88 88 What is the purpose of this survey? The U.S. Energy Information Administration (EIA) Form EIA-888, "On-Highway Diesel Fuel Price Survey," is designed to collect and publish data on the cash price (including taxes) of self-serve, on-highway diesel fuel. The data are used to calculate average diesel fuel oil prices at the national, regional, and select State levels which are vital to the trucking industry and shippers throughout the United States. These data are point-in-time estimates as of 8:00 a.m. Monday. The prices are released every Monday (Tuesday if Monday is a Federal holiday) through DOE's 24-hour telephone hotline at 202-586-6966. These average prices are also published in the Gasoline & Diesel Fuel Update and released electronically to subscribers of EIA's email notification (regular

344

Utility FGD survey: January--December 1989  

Science Conference Proceedings (OSTI)

This is Volume 1 of the Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

Hance, S.L.; McKibben, R.S.; Jones, F.M.

1992-03-01T23:59:59.000Z

345

Utility FGD survey, Janurary--December 1988  

SciTech Connect

The Utility FGD Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company. Simplified process flow diagrams of FGD systems, definitions, and a glossary of terms are attached to the report. Current data for domestic FGD systems show systems in operation, systems under construction, and systems planned. The current total FGD-controlled capacity in the United States is 67,091 MW. 2 figs., 9 tabs.

Hance, S.L.; McKibben, R.S.; Jones, F.M. (IT Corp., Cincinnati, OH (United States)) [IT Corp., Cincinnati, OH (United States)

1991-09-01T23:59:59.000Z

346

Utility FGD survey, January--December 1988  

Science Conference Proceedings (OSTI)

The Utility FGD Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company. Simplified process flow diagrams of FGD systems, definitions, and a glossary of terms are attached to the report. Current data for domestic FGD systems show systems in operation, systems under construction, and systems planned. The current total FGD-controlled capacity in the United States is 67,091 MW.

Hance, S.L.; McKibben, R.S.; Jones, F.M. (IT Corp., Cincinnati, OH (United States)) [IT Corp., Cincinnati, OH (United States)

1991-09-01T23:59:59.000Z

347

Energy Efficiency Fund (Electric) - Commercial and Industrial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial and Industrial Energy Efficiency Programs Energy Efficiency Fund (Electric) - Commercial and Industrial Energy Efficiency Programs Eligibility Commercial Industrial...

348

Industrial Distributed Energy: Combined Heat & Power | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial Distributed Energy: Combined Heat & Power Industrial Distributed Energy: Combined Heat & Power Information about the Department of Energy's Industrial Technologies...

349

Coldwater Board of Public Utilities - Commercial & Industrial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial & Industrial Lighting Rebate Program Coldwater Board of Public Utilities - Commercial & Industrial Lighting Rebate Program Eligibility Commercial Industrial Local...

350

Industrial Oil Products Newsletter April 2013  

Science Conference Proceedings (OSTI)

Read the Industrial Oil Products Newsletter April 2013. Industrial Oil Products Newsletter April 2013 Industrial Oil Products Newsletter April 2013 ...

351

Operations Improvement Surveys  

E-Print Network (OSTI)

Exxon Chemical Company developed unique site-wide energy optimization technology in the mid1970's. This technology was applied by means of site energy surveys which were carried out at every major Exxon facility throughout the world during the 1976-1981 timeframe. The first 20% of energy savings, versus the 1972 reference, had already been captured or was in progress via conventional energy conservation methods. The site energy surveys identified attractive investments to save a second 20% of energy use. In early 1982, Exxon Corp. started to apply this same technology to its major facilities to define attractive NO INVESTMENT and LOW INVESTMENT operational improvement savings which could be implemented quickly. This presentation covers Exxon's approach to site energy optimization and the Operations Improvement Survey Program. The Program has identified at many sites, an average of 5% reduction in today's energy costs at No/Low investment plus additional savings in the feedstock and energy supply areas.

Guide, J. J.; O'Brien, W. J.

1984-01-01T23:59:59.000Z

352

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Range Management Survey Date: Range Management Survey Date: 12/6/10 DOE Code: 6730.020.0000 Contractor 8067-788 Code: Project Lead: I Anthony Bowler Project Overview We will use a backhoe to get samples for our range management survey. At each site. one or 1. Brief project descnptlon [include anything that two holes will be excavated, and the samples will be taken from 0-1' and 1-2' deep. After could 1mpad the environment] excavating and the samples taken. the remaining soli Will be replaced and tamped back into 2. Legal location place. 3. Duratfon of tile project See attached NPR-3 Maps for preliminary locations : N~ area well 6-A-2\ NVV SW Section 21 . 4. Major equipment to be used f Township 39N, Range 78E) Middle area well 48-1 -Sh (SE SW 34 Township 39N, Range 4 WU-LSIT£5

353

ET Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ET Industries, Inc. ET Industries, Inc. (showerheads) Issued: May 24, 2013 BEFORE THE U.S. DEPARTMENT OF ENERGY Washington, D.C. 20585 ) ) ) ) ) Case Number: 2012-SE-2902 AMENDED NOTICE OF NONCOMPLIANCE DETERMINATION 1 Manufacturers (including importers) are prohibited from distributing covered products in the United States that do not comply with applicable federal water conservation standards. See 10 C.F.R. §§ 429.5, 429.102; 42 U.S.C. §§ 6291(10), 6302. On April 3, 2012, DOE tested one unit of the "ThunderHead" showerhead basic model ("basic model TH-1 " 2 ), which ET Industries, Inc. ("ET") imported into the United States. On April 24, 2012, DOE completed testing of three additional units of basic model TH-1, also imported into

354

Industrial lighting handbook  

SciTech Connect

Technological advances in industrial lighting system components now make it possible to reduce lighting system consumption by up to 50% or more without loss of the benefits inherent in good quality electric illumination. Management involvement in decisions about industrial lighting is essential, however, and this document provides generalized information in lay terms to help decision-makers become familiar with the concerns that affect industrial environment and the financial well-being of their companies. The five sections (1) discuss the benefits of good lighting, (2) review certain major lighting issues and terms, (3) identify procedures for developing a lighting energy management plan, (4) identify lighting energy management options (LEMOs), and (5) discuss sources of assistance. 19 figures, 8 tables.

1985-01-01T23:59:59.000Z

355

China's Industrial Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

China's Industrial Energy China's Industrial Energy Consumption Trends and Impacts of the Top-1000 Enterprises Energy- Saving Program and the Ten Key Energy-Saving Projects Jing Ke, Lynn Price, Stephanie Ohshita, David Fridley, Nina Khanna, Nan Zhou, Mark Levine China Energy Group Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Reprint version of journal article published in "Energy Policy", Volume 50, Pages 562-569, November 2012 October 2012 This work was supported by the China Sustainable Energy Program of the Energy Foundation through the U.S. Department of Energy under Contract No. DE-AC02- 05CH11231. ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY

356

Natural Gas Industrial Price  

Gasoline and Diesel Fuel Update (EIA)

Citygate Price Residential Price Commercial Price Industrial Price Electric Power Price Gross Withdrawals Gross Withdrawals From Gas Wells Gross Withdrawals From Oil Wells Gross Withdrawals From Shale Gas Wells Gross Withdrawals From Coalbed Wells Repressuring Nonhydrocarbon Gases Removed Vented and Flared Marketed Production NGPL Production, Gaseous Equivalent Dry Production Imports By Pipeline LNG Imports Exports Exports By Pipeline LNG Exports Underground Storage Capacity Gas in Underground Storage Base Gas in Underground Storage Working Gas in Underground Storage Underground Storage Injections Underground Storage Withdrawals Underground Storage Net Withdrawals Total Consumption Lease and Plant Fuel Consumption Pipeline & Distribution Use Delivered to Consumers Residential Commercial Industrial Vehicle Fuel Electric Power Period: Monthly Annual

357

INDUSTRIAL ASSESSMENT CENTER PROGRAM  

Science Conference Proceedings (OSTI)

Since its establishment in 1990, San Diego State Universitys Industrial Assessment Center (IAC) has served close to 400 small and medium-sized manufacturing plants in Southern California. SDSU/IACs efforts to transfer state-of-the-art technologies to industry have increased revenues, cultivated creativity, improved efficiencies, and benefited the environment. A substantial benefit from the program has been the ongoing training of engineering faculty and students. During this funding cycle, SDSU/IAC has trained 31 students, 7 of the graduate. A total of 92 assessments and 108 assessment days were completed, resulting in 638 assessment recommendations.

ASFAW BEYENE

2008-09-29T23:59:59.000Z

358

Industrial Assessment Center  

SciTech Connect

Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

Dr. Diane Schaub

2007-03-05T23:59:59.000Z

359

Solar industrial process heat  

DOE Green Energy (OSTI)

The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

Lumsdaine, E.

1981-04-01T23:59:59.000Z

360

Heliostat mirror survey and analysis  

DOE Green Energy (OSTI)

The mirrors used on concentrating solar systems must be able to withstand severe and sustained environmental stresses for long periods of time if they are to be economically acceptable. Little is known about how commercially produced wet process silvered second surface mirrors will withstand the test of time in solar applications. Field experience in existing systems has shown that the performance of the reflective surface varies greatly with time and is influenced to a large extent by the construction details of the mirror module. Degradation of the reflective layer has been seen that ranges from non-observable to severe. The exact mechanisms involved in the degradation process are not well understood from either the phenomenological or microanalytical points of view and are thus subject to much debate. The three chapters of this report summarize the work recently performed in three general areas that are key to understanding and ultimately controlling the degradation phenomena. These areas are: a survey of the present commercial mirroring industry, the microanalytical examination of numerous degraded and nondegraded mirrors, and an investigation of several novel techniques that might be used to extend the life of heliostat mirrors. Appendices include: (a) list of mirror manufacturers and (b) recommended specifications for second surface silvered mirrors for central receiver heliostat applications. (WHK)

Lind, M.A.; Buckwalter, C.Q.; Daniel, J.L.; Hartman, J.S.; Thomas, M.T.; Pederson, L.R.

1979-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Industrial Partnerships | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Carbon Fiber Consortium Manufacturing Industrial Partnerships Staff University Partnerships Events and Conferences Success Stories Video Newsletters Staff Contacts Partnerships Home | Connect with ORNL | For Industry | Partnerships | Industrial Partnerships SHARE Industrial Partnerships ORNL takes great pride in its work with U.S. industry. Each year, the Industrial Partnerships team hosts more than 100 visits to ORNL by both large corporations and small companies to help our potential partners understand the capabilities and expertise that exist at the laboratory and the various mechanisms available to help facilitate collaboration. Mechanism for Partnering How do I get started exploring industrial partnerships at ORNL? As the nation's largest science and energy laboratory, it can sometimes be

362

Energy conservation in the primary aluminum and chlor-alkali industries  

SciTech Connect

The primary aluminum and chlor-alkali industries together use nearly 13% of the electrical energy consumed by US industry. As part of its mission to promote energy conservation in basic US industries, the DOE surveys the present technological status of the major electrochemical industries and evaluates promising technological innovations that may lead to reduced energy requirements. This study provides technical and economic analyses in support of a government program of research and development in advanced electrolytic technology. This program is intended to supplement the development efforts directed toward energy savings by private industry. Sections II and III of this report cover aluminum and chlorine production processes only, since these two industries represent over 90% of the electrical energy requirements of all electrolytic industries in the United States. Section IV examines barriers to accelerated research and development by the electrolytic industries, and makes suggestions for government actions to overcome these barriers.

1980-10-01T23:59:59.000Z

363

Energy coservation status and needs: medium-sized commercial/industrial firms  

SciTech Connect

The potential for conserving energy by Seattle City Light's commercial/industrial customers is investigated. The results of the study will help SCL and others to provide energy- and money-saving help to their medium-sized business customers. Fifty in-person interviews of firms within the SCL area and 102 mailed questionnaires from customers outside the area in Washington and Oregon were analyzed. Researchers found that many steps requiring little cost have been implemented, but instituting further hard conservation measures such as new machinery, retrofitting, or changes in machine operations are lacking. (MCW)

1979-10-01T23:59:59.000Z

364

INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER  

SciTech Connect

The U. S. Department of Energys Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

MELINDA KRAHENBUHL

2010-05-28T23:59:59.000Z

365

Industrial cogeneration optimization program  

SciTech Connect

The purpose of this program was to identify up to 10 good near-term opportunities for cogeneration in 5 major energy-consuming industries which produce food, textiles, paper, chemicals, and refined petroleum; select, characterize, and optimize cogeneration systems for these identified opportunities to achieve maximum energy savings for minimum investment using currently available components of cogenerating systems; and to identify technical, institutional, and regulatory obstacles hindering the use of industrial cogeneration systems. The analysis methods used and results obtained are described. Plants with fuel demands from 100,000 Btu/h to 3 x 10/sup 6/ Btu/h were considered. It was concluded that the major impediments to industrial cogeneration are financial, e.g., high capital investment and high charges by electric utilities during short-term cogeneration facility outages. In the plants considered an average energy savings from cogeneration of 15 to 18% compared to separate generation of process steam and electric power was calculated. On a national basis for the 5 industries considered, this extrapolates to saving 1.3 to 1.6 quads per yr or between 630,000 to 750,000 bbl/d of oil. Properly applied, federal activity can do much to realize a substantial fraction of this potential by lowering the barriers to cogeneration and by stimulating wider implementation of this technology. (LCL)

1980-01-01T23:59:59.000Z

366

Industrial Assessment Center  

SciTech Connect

This project involved providing technical assistance to help small and medium size industries in Wisconsin to reduce operating costs by managing energy, waste and productivity. The project helped save 525 companies on average about $40,000 per year. Under the direction of Dr. Saxena, more than twenty undergraduate and ten graduate students were trained in energy, waste, and productivity management.

Umesh K. Saxena

2009-06-04T23:59:59.000Z

367

Synfuels industry opportunities  

SciTech Connect

Presentations made at the seminar are included in this volume. The present state in the development of synthetic fuels and the creation of the Synthetic Fuels Corporation are discussed by representatives of federal agencies and private industry. Separate abstracts of individual items were prepared for inclusion in the Energy Data Base and Energy Abstracts for Policy Analysis. (DMC)

Hill, R.F.; Boardman, E.B.; Heavner, M.L. (eds.)

1981-01-01T23:59:59.000Z

368

Wireless sensor network survey  

Science Conference Proceedings (OSTI)

A wireless sensor network (WSN) has important applications such as remote environmental monitoring and target tracking. This has been enabled by the availability, particularly in recent years, of sensors that are smaller, cheaper, and intelligent. These ... Keywords: Protocols, Sensor network deployment, Sensor network services, Survey, Wireless sensor network

Jennifer Yick; Biswanath Mukherjee; Dipak Ghosal

2008-08-01T23:59:59.000Z

369

Turning industry visions into reality  

Science Conference Proceedings (OSTI)

This brochure outlines the activities of the Office of Industrial Technologies (OIT) in the Department of Energy. OIT activities are aimed at industry adoption of energy-efficient, pollution-reducing technologies and include research and development on advanced technologies, financing, technical assistance, information dissemination, education, and bringing together industry groups, universities, National Laboratories, states, and environmentalists. OIT`s core initiative is to facilitate partnerships within seven materials and process industries: aluminum, chemicals, forest products, glass, metalcasting, petroleum refining, and steel industries.

NONE

1997-01-01T23:59:59.000Z

370

Industrial battery stack  

SciTech Connect

A novel industrial battery stack is disclosed, wherein positive plates which have been longitudinally wrapped with a perforate or semi-perforate material are accurately aligned with respect to the negative plates and separators in the stack during the stacking operation. The novel spacing members of the present invention have a generally U-shaped cross section for engaging through the wrapping a portion of the positive plate adjacent to the longitudinal edges of that plate. Projections protruding substantially from the base of the ''U'' provide the proper distance between the edge of the wrapped plate and an adjacent longitudinal surface. During the stacking and burning operation, this longitudinal surface comprises the back wall of a novel industrial battery plate holder. Following the burning of the battery stack and its subsequent assembly into an appropriate industrial battery case, the spacing member or members act to protect the positive battery plates and retain them in their proper alignment during the operation of the battery. Applicants have also provided a novel apparatus and method for stacking, aligning and burning industrial battery stacks which comprises a battery stack holder having several upstanding walls which define a stacking column having a coplanar terminus. An adjustably locatable partition within said stacking column may be disposed at any of a plurality of positions parallel with respect to the coplanar terminus so that the battery stack holder may be adjusted for any of a variety of given sizes of plates and separators. The battery plates and separators may then be stacked into the battery stack holder so that only the plate lugs extrude beyond the coplanar terminus. A dam is insertable along the top of the battery plates and across the top of the upstanding side walls of the battery stack holder to facilitate the rapid efficient burning of the industrial battery stack.

Digiacomo, H.L.; Sacco, J.A.

1980-08-19T23:59:59.000Z

371

ConEd (Electric) - Commercial and Industrial Energy Efficiency Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ConEd (Electric) - Commercial and Industrial Energy Efficiency ConEd (Electric) - Commercial and Industrial Energy Efficiency Program ConEd (Electric) - Commercial and Industrial Energy Efficiency Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Large Commercial Energy Study: $50,000 (electric); $67,000 (combined with gas) Program Info Expiration Date 12/31/2015 State New York Program Type Utility Rebate Program Rebate Amount Lighting: Varies widely by type Small Business Energy Surveys: Free Small Business Equipment Upgrades: up to 70% of cost Large Commercial Energy Study: 50% of the cost

372

2010 Federal Employee Viewpoint Survey  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Employee Viewpoint Survey Federal Employee Viewpoint Survey Page 1 of 20 ________________________________________________________________________________________________________________________________________________________________________________________________________________ Department of Energy 2010 Federal Employee Viewpoint Survey: Trend Report (2006 and 2008 results have been recalculated to exclude Do Not Know/No Basis to Judge responses) Response Summary Surveys Completed 2010 Governmentwide 263,475 2010 Department of Energy 6,648 2008 Department of Energy 6,093 2006 Department of Energy 7,742 This 2010 Federal Employee Viewpoint Survey Report provides summary results for your department or agency. The results include Positive, Neutral, and Negative response percentages for each survey item. For each of the

373

FACILITY SURVEY & TRANSFER Facility Survey & Transfer Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SURVEY & TRANSFER SURVEY & TRANSFER Facility Survey & Transfer Overview Transfer Activities Checklist Pre-Survey Information Request Survey Report Content Detailed Walkdown Checklist Walkdown Checklist Clipboard Aids S & M Checklist Survey Report Example - Hot Storage Garden Survey Report Example - Tritium System Test Assembly Survey Report Example - Calutron Overview As DOE facilities become excess, many that are radioactively and/or chemically contaminated will become candidate for transfer to DOE-EM for deactivation and decommissioning. Requirements and guidance for such transfers are contained in:  DOE Order 430.1B Chg. 2, REAL PROPERTY & ASSET MANAGEMENT  DOE Guide 430.1-5, TRANSITION IMPLEMENTATION GUIDE The transfer process is illustrated in the Transfer Process figure. The purpose here is to provide examples of methods and

374

Survey of neutron radiography facilities  

SciTech Connect

A directory of neutron radiography facilities around the world was informally compiled about ten years ago under the auspices of the American Society for Testing and Materials (ASTM), Subcommittee E7.05 (Radiology, Neutron). The work lay dormant for a number of years, but was revived in earnest in the fall of 1995. At that time, letters were mailed to all the facilities with available addresses in the original directory, requesting updated information. Additionally, information was gathered at the Second Topical meeting on neutron Radiography Facility System Design and Beam Characterization (November, 1995, Shonan Village, Japan). A second mailing was sent for final confirmation and updates in January, 1996. About 75% of the information in the directory has now been confirmed by the facility management. This paper presents a summary of the information contained in the facility directory. An electronic version of the directory in Wordperfect 6.1, uuencode, or rtf format is available by sending e-mail to the authors at imel{at}anl.gov or imel{at}baobab.cad.cea.fr. A WWW site for the directory is presently under construction.

Imel, G.R. [Centre d`Etudes de Cadarache, St. Paul lez Durance (France); McClellan, G.G. [Argonne National Lab., Idaho Falls, ID (United States)

1996-08-01T23:59:59.000Z

375

Industrial Technologies Success Stories - Energy Innovation Portal  

Bookmark Industrial Technologies Success Stories - Energy Innovation Portal on Google; Bookmark Industrial Technologies Success Stories ...

376

Industrial Energy Procurement Contracts  

E-Print Network (OSTI)

Rates are going down and services are improving! Or are they? As opportunities to directly contract for energy expand from the larger industrials to include mid-market companies, existing energy supply and service contracts will be renegotiated and new ones developed. Many of these mid-level industrial customers typically lack in-house expertise on energy procurement, yet their operations use significant amounts of energy. This paper looks at some of the issues involved in the main terms of a procurement contract, as well as issues in contract formation and termination. Finally the paper reviews some of the recent energy aggregation and outsourcing deals to highlight some that worked and some that didn't.

Thompson, P.; Cooney, K.

2000-04-01T23:59:59.000Z

377

Coal industry annual 1993  

Science Conference Proceedings (OSTI)

Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

Not Available

1994-12-06T23:59:59.000Z

378

Industrial Facilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial Facilities Industrial Facilities Industrial Facilities October 8, 2013 - 10:14am Addthis The Federal Energy Management Program (FEMP) encourages Federal agencies requiring assistance with implementing energy-efficiency measures in their industrial facilities to hire a U.S. Department of Energy Industrial Assessment Center (IAC) for assessment services. The following resources can be used to plan and implement industrial facility energy-efficiency projects. Technical Publications: The Advanced Manufacturing Office (AMO) website offers fact sheets, handbooks, and self-assessment manuals covering steam system efficiency, fundamentals of compressed air systems, motor systems management, and other topics. Tools: The AMO website offers valuable software tools for evaluating

379

Evolution of industrial automation  

Science Conference Proceedings (OSTI)

Automation has been of high priority for the manufacturing sector, from Ford's first set of Model-T Assembly lines in the early 1920s to the modern factory floor. With appropriate automation, the aim was to rationalise the production and keep ... Keywords: Ethernet, architecture, automated manufacturing, bus topology, control servers, distributed control, economies of scale, embedded intelligence, functionality, fuzzy logic, global village, graphic panel, industrial automation, networking, networks

R. Murugesan

2006-03-01T23:59:59.000Z

380

Industrial - Utility Cogeneration Systems  

E-Print Network (OSTI)

Cogeneration may be described as an efficient method for the production of electric power in conjunction with process steam or heat which optimizes the energy supplied as fuel to maximize the energy produced for consumption. In a conventional electric utility power plant, considerable energy is wasted in the form of heat rejection to the atmosphere thru cooling towers, ponds or lakes, or to rivers. In a cogeneration system heat rejection can be minimized by systems which apply the otherwise wasted energy to process systems requiring energy in the form of steam or heat. Texas has a base load of some 75 million pounds per hour of process steam usage, of which a considerable portion could be generated through cogeneration methods. The objective of this paper is to describe the various aspects of cogeneration in a manner which will illustrate the energy saving potential available utilizing proven technology. This paper illustrates the technical and economical benefits of cogeneration in addition to demonstrating the fuel savings per unit of energy required. Specific examples show the feasibility and desirability of cogeneration systems for utility and industrial cases. Consideration of utility-industrial systems as well as industrial-industrial systems will be described in technical arrangement as well as including a discussion of financial approaches and ownership arrangements available to the parties involved. There is a considerable impetus developing for the utilization of coal as the energy source for the production of steam and electricity. In many cases, because of economics and site problems, the central cogeneration facility will be the best alternative for many users.

Harkins, H. L.

1979-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Transforming the Oil Industry into the Energy Industry  

E-Print Network (OSTI)

Transforming the Oil Industry into the Energy Industry BYculprit. It consumes half the oil used in the world andconsuming two thirds of the oil and causing about one third

Sperling, Daniel; Yeh, Sonia

2009-01-01T23:59:59.000Z

382

Update on Energy Saving Opportunities in Industrial Electrical Power Systems  

E-Print Network (OSTI)

High electrical power costs, rising at a rate consistently above that of general inflation, force the industrial power user to continuously update and evaluate available means of saving electrical energy. This paper provides a survey of one company's experience with several methods of energy conservation in electrical distribution systems, and its present practices in this area. Topics covered include the location of large and reducible losses, the determination of the worth of these losses, and a survey of ways to reduce them in an economical manner.

Frasure, J. W.; Fredericks, C. J.

1986-06-01T23:59:59.000Z

383

Sloan digital sky survey  

SciTech Connect

The Sloan Digital Sky Survey will produce a detailed digital photometric map of half the northern sky to about 23 magnitude using a special purpose wide field 2.5 meter telescope. From this map we will select {approximately} 10{sup 6} galaxies and 10{sup 5} quasars, and obtain high resolution spectra using the same telescope. The imaging catalog will contain 10{sup 8} galaxies, a similar number of stars, and 10{sup 6} quasar candidates.

Kent, S.M.; Stoughton, C.; Newberg, H.; Loveday, J.; Petravick, D.; Gurbani, V.; Berman, E.; Sergey, G. [Fermi National Accelerator Lab., Batavia, IL (United States); Lupton, R. [Princeton Univ., NJ (United States)

1994-04-01T23:59:59.000Z

384

Industrial Energy Use Indices  

E-Print Network (OSTI)

Energy use indices and associated coefficients of variation are computed for major industry categories for electricity and natural gas use in small and medium-sized plants in the U.S. Standard deviations often exceed the average EUI for an energy type, with coefficients of variation averaging 290% for 8,200 plants from all areas of the continental U.S. Data from milder climates appears more scattered than that from colder climates. For example, the ratio of the average of coefficient of variations for all industry types in warm versus cold regions of the U.S. generally is greater than unity. Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used in the south of the U.S. This analysis uses electricity and natural gas energy consumption and area data of manufacturing plants available in the U.S. Department of Energys national Industrial Assessment Center database.

Hanegan, A.; Heffington, W. M.

2007-01-01T23:59:59.000Z

385

2006 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

6 User Survey Results 6 User Survey Results Show All | 1 2 3 4 5 ... 15 | Next » 2006 User Survey Results Table of Contents Survey Results Users are invited to provide overall comments about NERSC: Here are the survey results: Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness Ratings All Usefulness Topics Hardware Resources Software Visualization and Data Analysis HPC Consulting Services and Communications Web Interfaces Training Comments about NERSC Survey Results Many thanks to the 256 users who responded to this year's User Survey. This represents a response rate of about 13 percent of the active NERSC users. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's

386

New techniques and products solve industry problems. [New technology available for the natural gas pipeline industry  

SciTech Connect

Recently introduced technology advances in data handling, manipulation and delivery; new gas and storage marketing products; a nonintrusive pipe-crack arrester; and responsive pipe-coating mill construction show promise for cutting industry costs by increasing efficiency in pipe line construction, repair, rehabilitation, and operations. The products, services and methods described in this new technology survey include: a PC-compatible dataserver that requires no user programming; flexible, responsive gas transportation scheme; evaluation of possible further uses on brittle transmission lines for fiberglass-reinforced resin composite; new multilayer epoxy PE coating mill in Corinth, Greece, near areas where large pipe line construction and rehabilitation projects are contemplated.

Bullion, L.

1993-09-01T23:59:59.000Z

387

Economics and policy implications of industrial fuel usage  

Science Conference Proceedings (OSTI)

The nation's use of wood as fuel is put into perspective, recognizing constraints imposed by governmental initiatives and actions. The forest product industry, and its use of wood for energy, is surveyed. The effect of PURPA on this industry, the nation's leader in cogeneration, is discussed. Proposed energy taxes would reverse recent trends in energy conservation. Low sulphur content frees wood and its residues from environmental legislation. Federal funding is needed to determine the extent of the economically accessible fuel wood. The proposed deregulation of natural gas will affect wood use adversely.

Slinn, D.J.

1983-06-01T23:59:59.000Z

388

Evolution of the U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008  

E-Print Network (OSTI)

and S. Rezessy. 2010. Energy Service Companies Market inSurvey of the U.S. Energy Services Company (ESCO) Industry:and E. Vine, 2006. Energy service companies in European

Goldman, Charles A.

2013-01-01T23:59:59.000Z

389

Industrial applications of solar energy. First quarterly progress report  

DOE Green Energy (OSTI)

The objective of this program is to define solar energy systems that are technically and economically feasible, can satisfy all or part of selected industry demands, and to determine the market potential for such systems. The primary emphasis is placed on the application of total energy systems where industrial process heat, electrical needs, and space heating and cooling requirements are satisfied with a single solar collector field at maximum possible efficiency. Industrial energy usage in the United States and the Southwest was surveyed to determine which industries were most energy intensive. This resulted in the selection of six major groups: (1) Chemicals and Allied Products - SIC 28, (2) Primary Metals - SIC 33, (3) Petroleum and Coal Products - SIC 29, (4) Paper and Allied Products - SIC 26, (5) Stone, Clay, and Glass Products - SIC 32, and (6) Food and Kindred Products - SIC 20. These groupings account for approximately 80% of the total industrial energy usage, both nationwide and within the Southwest. These major groups were then pursued through their subdivisions to determine more specifically the largest energy users and their locations within the Southwest, allowing the final industry selection. Approximately 300 representatives of the selected industries were contacted to determine their specific energy requirements as well as architecturally related energy parameters. Climatic and seismic data is also being collected for the areas encompassing the selected regions.

Rogan, J.E.

1976-01-01T23:59:59.000Z

390

2002 Manufacturing Energy Consumption Survey - User Needs Survey  

U.S. Energy Information Administration (EIA) Indexed Site

2002 Manufacturing Energy Consumption Survey: User-Needs Survey 2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next “ Energy Consumption Survey” (MECS)! As our valued customer, you are in an important position to tell us what kinds of data are most useful in helping you understand energy consumption in the U.S. manufacturing sector. Below is a short electronic survey with just a few questions. We will stop collecting responses for user feedback on May 17, 2002. This deadline serves to meet our intended release date of April/May 2003 for fielding MECS2002. The MECS is designed to produce estimates of energy consumption and other energy-related activities in manufacturing. The survey also collects information on energy expenditures, average prices, onsite generation of

391

NETL: Industrial Capture & Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Capture & Storage Industrial Capture & Storage Technologies Industrial Capture & Storage The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL, or DOE) is currently implementing a program titled "Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO2 Use." This CO2 Capture and Sequestration (CCS) and CO2 use program is a cost-shared collaboration between the Government and industry whose purpose is to increase investment in clean industrial technologies and sequestration projects. In accordance with the American Recovery and Reinvestment Act of 2009, and Section 703 of Public Law 110-140, DOE's two specific objectives are to demonstrate: (1) Large-Scale Industrial CCS projects from industrial sources, and (2) Innovative Concepts for beneficial CO2 use.

392

Industrial Applications for Renewable Resources  

Science Conference Proceedings (OSTI)

This CD-ROM contains the PowerPoint presentations from the presenters from Industrial Applications of Renewable Resources: A Conference on Sustainable Technologies. Industrial Applications for Renewable Resources Biofuels and Bioproducts and Biodiesel DV

393

Texas Industries of the Future  

E-Print Network (OSTI)

The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs, resulting in improved competitive performance. The bottom line for Texas industry is savings in energy and materials, cost-effective environmental compliance, increased productivity, reduced waste, and enhanced product quality. The state program leverages the programs and tools of the federal Department of Energy's Industries of the Future. At the federal level, there are nine Industries of the Future: refining, chemicals, aluminum, steel, metal casting, glass, mining, agriculture, and forest products. These industries were selected nationally because they supply over 90% of the U.S. economy's material needs and account for 75% of all energy use by U.S. industry. In Texas, three IOF sectors, chemicals, refining and forest products, account for 86% of the energy used by industry in this state.

Ferland, K.

2002-04-01T23:59:59.000Z

394

Empirical essays in industrial organization  

E-Print Network (OSTI)

In this dissertation, I present three empirical essays that encompass topics in industrial organization. The first essay examines the degree of competition and spatial differentiation in the retail industry by exploiting ...

Chiou, Lesley C

2005-01-01T23:59:59.000Z

395

Industry Professional | Open Energy Information  

Open Energy Info (EERE)

Industry Professional Jump to: navigation, search How to GET INVOLVED WITH OpenEI Get involved with OpenEI Programmer.jpg Industry Professional Do you have valuable information...

396

Deaerators in Industrial Steam Systems  

SciTech Connect

This revised ITP tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

397

High Technology and Industrial Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Semiconductor clean room Semiconductor clean room High Technology and Industrial Systems EETD's research on high technology buildings and industrial systems is aimed at reducing energy consumed by the industrial sector in manufacturing facilities, including high technology industries such as data centers, cleanrooms in the such industries as electronics and pharmaceutical manufacturing, and laboratories, improving the competitiveness of U.S. industry. Contacts William Tschudi WFTschudi@lbl.gov (510) 495-2417 Aimee McKane ATMcKane@lbl.gov (518) 782-7002 Links High-Performance Buildings for High-Tech Industries Industrial Energy Analysis Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

398

Small DR Industry Experiences  

Science Conference Proceedings (OSTI)

Over the past twenty years, a number of companies have developed products and provided services for the small distributed resources (DR) market. There are powerful lessons and insights to gain from these efforts. With the growing interest in DR and the emergence of new technologies and products in the less than 300kW size range, this report looks at the past and the different paths that companies have taken to bring small power products to market. Representative surveys were conducted of major players in...

2000-12-06T23:59:59.000Z

399

Partnering Highlights - Industrial Partnerships Office  

Lawrence Livermore National Laboratory (LLNL) is participating in six industry projects for the advancement of energy technologies using high ...

400

Definition: Airborne Gravity Survey | Open Energy Information  

Open Energy Info (EERE)

Survey Jump to: navigation, search Dictionary.png Airborne Gravity Survey Airborne gravity gradiometry (AGG) surveys provide information regarding the mass distribution of the...

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

2010 State Laboratory Program Workload Survey  

Science Conference Proceedings (OSTI)

Page 1. 2010 State Laboratory Program Workload Survey 2010 SLP Survey v.1.00 August 17, 2011 Page 2. SLP Survey 2010 - Page 2 of 122 ...

2011-08-24T23:59:59.000Z

402

Aluminum: Industry of the future  

SciTech Connect

For over a century, the US aluminum industry has led the global market with advances in technology, product development, and marketing. Industry leaders recognize both the opportunities and challenges they face as they head into the 21st century, and that cooperative R and D is key to their success. In a unique partnership, aluminum industry leaders have teamed with the US Department of Energy`s Office of Industrial Technologies (OIT) to focus on innovative technologies that will help to strengthen the competitive position of the US aluminum industry and, at the same time, further important national goals. This industry-led partnership, the Aluminum Industry of the Future, promotes technologies that optimize the use of energy and materials in operations and reduce wastes and energy-related emissions. Led by The Aluminum Association, industry leaders began by developing a unified vision of future market, business, energy, and environmental goals. Their vision document, Partnerships for the Future, articulates a compelling vision for the next 20 years: to maintain and grow the aluminum industry through the manufacture and sale of competitively priced, socially desirable, and ecologically sustainable products. Continued global leadership in materials markets will require the combined resources of industry, universities, and government laboratories. By developing a unified vision, the aluminum industry has provided a framework for the next step in the Industries of the Future process, the development of a technology roadmap designed to facilitate cooperative R and D.

1998-11-01T23:59:59.000Z

403

Recent developments: Industry briefs  

SciTech Connect

The January 1992 Industry Briefs includes brief articles on: (1) the startup of Chinese and Indian nuclear units, (2) agreements between China and Pakistan for the construction of a nuclear unit, (3) international safeguards agreements, (4) restart of a nuclear unit in Armenia, (5) closure of a German nuclear waste site, (6) restructuring of the Hungarian state-owned utility MVMT, (7) requests for bids for Wolsong Units 3 and 4, (8) signing of the European Energy charter, (9) continued operation of the MAGNOX reactors, and (10) changing Canadian requirements on uranium.

NONE

1992-01-01T23:59:59.000Z

404

Coal industry annual 1996  

Science Conference Proceedings (OSTI)

This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

NONE

1997-11-01T23:59:59.000Z

405

The changing battery industry  

SciTech Connect

This report provides an economic and technological assessment of the electrical battery industry, highlighting major trends. Among those systems considered are lithium-based, sodium-sulfur nickel-zinc, nickel-iron, nickel-hydrogen, zinc-chloride, conductive polymer, and redox cells. Lead-acid, nickel-cadmium, and manganese dioxide-based batteries and direct solar power and fuel cells are discussed in relation to these new techniques. New applications, including electric vehicles, solar power storage, utility load leveling, portable appliances, computer power and memory backup, and medical implants are discussed. Predictions and development scenarios for the next twenty years are provided for the U.S. market.

Not Available

1987-01-01T23:59:59.000Z

406

Recent developments: Industry briefs  

Science Conference Proceedings (OSTI)

This article is the `Industry Briefs` portion of Nuexco`s September 1992 `Recent Developments` section. Specific iems discussed include: (1) merger of Urangesellschaft and Interuran, (2) cessation of uranium mining in Bulgaria, (3) record operation of Limerick-2 and Tokai-2, (4) MRS in Wyoming, (5) low-level waste facilities at Perry, (6) closure of Trojan, (7) restart of Kozloduy-6, (8) agreements between Cogema and Minatom, (9) planning for a large nuclear power plant in Japan moves forward, (10) order of a new reactor at Civaux, (11) relicensing of Yankee Rowe, (12) operation of Bradwell-2, and (13) high-level waste management in Japan.

NONE

1992-09-01T23:59:59.000Z

407

Recent developments: Industry briefs  

Science Conference Proceedings (OSTI)

This article is the `Industry Briefs` portion of Nuexco`s August 2992 `Recent Developments` section. Specific items discussed include: (1) non-proliferation in Argentina and Brazil, (2) a joint-venture uranium leaching project in the USA, (3) life extension for Yankee Rowe, (4) contracts for nuclear plants in the Republic of Korea, (5) cleanup of Wismut, (6) record operation of Three Mile Island-1, Oconee-1, and Cook-1, (7) closure of Kozloduy units, (8) China`s ascension to the non-proliferation treaty, and (9) a centrifuge enrichment facility in Japan.

NONE

1991-08-01T23:59:59.000Z

408

Coal Industry Annual 1995  

SciTech Connect

This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

1996-10-01T23:59:59.000Z

409

The impact of government policies on industrial evolution : the case of China's automotive industry  

E-Print Network (OSTI)

Governmental industrial policies have great influence on industrial performances and development trajectories. The infant industry theory has been the dominating theoretical foundation of the industrial policies in developing ...

Luo, Jianxi

2006-01-01T23:59:59.000Z

410

Airborne Inspection Technology: Market Survey  

Science Conference Proceedings (OSTI)

This report presents findings of an investigation into various airborne inspection technologies currently used within the electric utility industry.

2002-03-04T23:59:59.000Z

411

ENERGY CONSUMPTION SURVEY  

U.S. Energy Information Administration (EIA) Indexed Site

5 RESIDENTIAL TRANSPORTATION 5 RESIDENTIAL TRANSPORTATION ENERGY CONSUMPTION SURVEY Prepared for: UNITED STATES DEPARTMENT OF ENERGY ENERGY INFORMATION ADMINISTRATION OFFICE OF ENERGY MARKETS AND END USE ENERGY END USE DIVISION RESIDENTIAL AND COMMERCIAL BRANCH WASHINGTON, DC 20585 Prepared by: THE ORKAND CORPORATION 8484 GEORGIA AVENUE SILVER SPRING, MD 20910 October 1986 Contract Number DE-AC01-84EI19658 TABLE OF CONTENTS FRONT MATTER Index to Program Descriptions........................................... vi List of Exhibits ....................................................... viii Acronyms and Abbreviations ............................................. ix SECTION 1: GENERAL INFORMATION ........................................ 1-1 1.1. Summary ....................................................... 1-1

412

Laundered protective clothing survey  

SciTech Connect

It is considered appropriate occasionally to make independent checks on the effectiveness of the plant laundry in removing radioactive contamination from plant-issue protective clothing. Previous surveys have offered constructive criticism resulting in improved handling of high level and soft beta contaminated clothing and incorporation in new designs of ventilating and air sampling recommendations. Recurrently the adequacy of laundry reject limits is questioned, and only recently an accurate, special study resulted in relaxed limits for Metal Preparation area clothing. A current question concerns the advisability of determining the reject level on the beta-gamma monitor more frequently than once a day. 2 tabs.

Clukey, H.V.

1952-10-15T23:59:59.000Z

413

Pretreatment of industrial discharges to publicly owned treatment works (POTW)  

SciTech Connect

A discussion covers a brief survey of federal regulations establishing standards for the pretreatment of pollutants discharged into POTW's; the experience of the Municipality of Metropolitan Seattle (Metro) in dealing with the pretreatment of heavy metals in industrial and commercial discharges; a study and analysis by Seattle Metro of organic priority pollutants in wastewater including identification sources; and POTW treatment control technology for organic priority pollutants in Seattle Metro.

Ongerth, J.E.; Dewalle, F.B.

1980-08-01T23:59:59.000Z

414

Industrial safety and applied health physics. Annual report for 1977  

SciTech Connect

Progress is reported on the following: radiation monitoring with regard to personnel monitoring and health physics instrumentation; environs surveillance with regard to atmospheric monitoring, water monitoring, radiation background measurements, and soil and grass samples; radiation and safety surveys with regard to laboratory operations monitoring, radiation incidents, and laundry monitoring; industrial safety and special projects with regard to accident analysis, disabling injuries, and safety awards. (HLW)

Auxier, J.A.; Davis, D.M.

1978-06-01T23:59:59.000Z

415

Human factors aspects of advanced instrumentation in the nuclear industry  

SciTech Connect

An important consideration in regards to the use of advanced instrumentation in the nuclear industry is the interface between the instrumentation system and the human. A survey, oriented towards identifying the human factors aspects of digital instrumentation, was conducted at a number of United States (US) and Canadian nuclear vendors and utilities. Human factors issues, subsumed under the categories of computer-generated displays, controls, organizational support, training, and related topics were identified. 20 refs., 2 tabs.

Carter, R.J.

1989-01-01T23:59:59.000Z

416

Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

6 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive 6 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Data Methodology & Forms 2006 Data Tables Revision notice (November 2009): Tables 1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.5, 4.1 and 4.2 have been slightly revised due to further editing. The revisions in XLS are indicated with a value of "R" in an adjacent column. In the PDF versions, the revised values are superscripted with an "R". No further revisions are anticipated for these tables. all tables + EXPAND ALL Consumption of Energy for All Purposes (First Use) Values RSE Table 1.1 By Mfg. Industry & Region (physical units) XLS PDF XLS Table 1.2 By Mfg. Industry & Region (trillion Btu) XLS PDF XLS Table 1.3 By Value of Shipments & Employment Size Category & Region XLS PDF XLS

417

Guardian Industries | Open Energy Information  

Open Energy Info (EERE)

Industries Industries Jump to: navigation, search Name Guardian Industries Place Auburn Hills, MI Website http://www.guardian.com/ References Results of NREL Testing (Glass Magazine)[1] Guardian News Archive[2] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Other Relationship Partnering Center within NREL Transportation Technologies and Systems Partnership Year 2002 LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Guardian Industries is a company located in Auburn Hills, MI. References ↑ "Results of NREL Testing (Glass Magazine)" ↑ "Guardian News Archive" Retrieved from "http://en.openei.org/w/index.php?title=Guardian_Industries&oldid=381719" Categories: Clean Energy Organizations

418

Outlook for Industrial Energy Benchmarking  

E-Print Network (OSTI)

The U.S. Environmental Protection Agency is exploring options to sponsor an industrial energy efficiency benchmarking study to identify facility specific, cost-effective best practices and technologies. Such a study could help develop a common understanding of opportunities for energy efficiency improvements and provide additional information to improve the competitiveness of U.S. industry. The EPA's initial benchmarking efforts will focus on industrial power facilities. The key industries of interest include the most energy intensive industries, such as chemical, pulp and paper, and iron and steel manufacturing.

Hartley, Z.

2000-04-01T23:59:59.000Z

419

NETL: Industrial Capture & Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Technologies Industrial Capture & Storage Area 1 Large-Scale Industrial CCS Program The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL, or DOE) is currently implementing a program titled "Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO2 Use." This CO2 Capture and Sequestration (CCS) and CO2 use program is a cost-shared collaboration between the Government and industry whose purpose is to increase investment in clean industrial technologies and sequestration projects. In accordance with the American Recovery and Reinvestment Act of 2009, and Section 703 of Public Law 110-140, DOE's two specific objectives are to demonstrate: (1) Large-Scale Industrial CCS projects from industrial sources, and (2) Innovative Concepts for beneficial CO2 use.

420

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEPA COMPLIANCE SURVEY NEPA COMPLIANCE SURVEY # 350 8 Revised 8/2/10 mjt Attachment 1 Written by Dan Smallwood Production Enhancement Project-5 T-2-34 to T-1-33 MIT all wells in this area to determine which are producing wells. There are 15 wells shut in this area because of no tank or shipping line. According to the old test sheet these wells make 24bbls oil and 120bbls of water. Two of these wells have leaks in the flow lines that will be fixed. One is 33-S-34 which could be run to 34-AX-34, about 400' .6 bbl/pd and the other is 35 shx 34 which could be run to 35-AX-34 which is about 200'.5bbl/pd. 42-AX-34 could be ran to 32-AX-34 and then to 33-SX-34 to 34-AX-34. There are two manifolds at T-2-34, one with 10 wells and the other with 12. None of the flow lines have valves or checks in the lines. I propose we flush, disconnect, and plug all wells that

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 Project Information Project Title: Survey Centralizer Design Date: 2-10-2010 DOE Code: 6730.020.71091 Contractor Code: 8067-762 Project Lead: Frank Ingham Project Overview 1. What are the environmental No environmental impacts. impacts? Run a logging tool through existing wells at : 2. What is the /ega/location? 67-LBT-3, SW SE sec 3, T38N , R78W 86-1 -X-10 , NE SE Sec 10, T38N , R78W 3. What is the duration of the project? 22-2-X-10H , NW NW Sec 10, T38N , R78W 4. What major equipment will be used if any (work over rig , drilling rig, 4 Days etc.)? Stinger truck or crane . The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

422

Chemical production from industrial by-product gases: Final report  

DOE Green Energy (OSTI)

The potential for conservation of natural gas is studied and the technical and economic feasibility and the implementation of ventures to produce such chemicals using carbon monoxide and hydrogen from byproduct gases are determined. A survey was performed of potential chemical products and byproduct gas sources. Byproduct gases from the elemental phosphorus and the iron and steel industries were selected for detailed study. Gas sampling, preliminary design, market surveys, and economic analyses were performed for specific sources in the selected industries. The study showed that production of methanol or ammonia from byproduct gas at the sites studied in the elemental phosphorus and the iron and steel industries is technically feasible but not economically viable under current conditions. Several other applications are identified as having the potential for better economics. The survey performed identified a need for an improved method of recovering carbon monoxide from dilute gases. A modest experimental program was directed toward the development of a permselective membrane to fulfill that need. A practical membrane was not developed but further investigation along the same lines is recommended. (MCW)

Lyke, S.E.; Moore, R.H.

1981-04-01T23:59:59.000Z

423

Emerging energy-efficient industrial technologies  

E-Print Network (OSTI)

Performance for Industrial Refrigeration Systems. M.Sc.the performance of industrial refrigeration systems. SystemIndustrial Technologies Cooling and Storage (Food-4) Refrigeration

2000-01-01T23:59:59.000Z

424

Litigation in Argentina: challenging the tobacco industry.  

E-Print Network (OSTI)

Profits over people: Tobacco Industry Activities to MarketBarnoya J, Glantz S. Tobacco industry success in preventingL. Implications of the tobacco industry documents for public

Flores, M L; Barnoya, J; Mejia, R; Alderete, E; Prez-Stable, E J

2006-01-01T23:59:59.000Z

425

Emerging energy-efficient technologies for industry  

E-Print Network (OSTI)

Efficient Technologies for Industry Ernst Worrell Staff20036, USA ABSTRACT U.S. industry consumes approximately 37%efficient technologies for industry, focusing on over 50

2004-01-01T23:59:59.000Z

426

NSLS Industrial User Program | Synchrotron Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

NSLS Industrial Users' Program Industry Home | Synchrotron Techniques | Battery Lab | Science Highlights | Industrial Program Coordinator | Publications Battery Lab NSLS users are...

427

Industrial Partnerships - Oak Ridge National Laboratory | ORNL  

Industrial Partnerships Overview. ORNL takes great pride in its work with U.S. industry, both large and small. Each year, the Industrial Partnerships team hosts more ...

428

Industrial Energy Efficiency and Climate Change Mitigation  

E-Print Network (OSTI)

and Paper n Other Industries, Electricity Conservation s65% of electricity consumed by industry is used by motorof the main industries include electricity savings. q

Worrell, Ernst

2009-01-01T23:59:59.000Z

429

Case Study of the California Cement Industry  

E-Print Network (OSTI)

2 compares cement industry electricity and natural gas useTable 2. Cement Industry Electricity and Natural GasFigure 2. Cement Industry End Use Electricity Consumption

Coito, Fred; Powell, Frank; Worrell, Ernst; Price, Lynn; Friedmann, Rafael

2005-01-01T23:59:59.000Z

430

Industrial Energy Audit Guidebook: Guidelines for Conducting...  

Open Energy Info (EERE)

Industrial Energy Audit Guidebook: Guidelines for Conducting an Energy Audit in Industrial Facilities Jump to: navigation, search Name Industrial Energy Audit Guidebook: Guidelines...

431

Evaluating the DSM Potential for Industrial Electrotechnologies and Management Practices  

E-Print Network (OSTI)

In an effort to help balance load requirements and generating capacity, Houston Lighting & Power Company (HL&P) contracted with SRI International (SRI) to identify existing and emerging electrotechnologies and management practices (technologies) for possible inclusion in an industrial demand side management (DSM) program. This paper outlines the procedures used to evaluate technologies that may impact oil refining, pulp & paper production, and 26 major chemical processes of industrial customers within HL&P's service area. Each technology was reviewed with regard to its electricity requirements and applicability to various industries. In addition, each technology's basic principles, existing industrial applications, possible new applications, product or process limitations, and representative economics were investigated. Where applicable, concerns other than economic attractiveness such as environmental issues, worker safety, and product quality were identified. Additional information was also obtained from preliminary efforts to project the commercial penetration of each of these technologies. Factors affecting commercial penetration include the existing level of market penetration, fuel prices, electricity prices, capital investment requirements, perceived risk, and internal hurdles rates for investment. In order to fully determine which of these technologies should be included in an industrial DSM program, various HL&P industrial customers were interviewed with regard to their knowledge and/or acceptance levels of selected electrotechnologies and management practices. This enabled HL&P to better understand the specific needs of industrial customers within their service area. This survey data, along with the information provided by SRI and other sources, formed the basis for initial selection of technologies to include in an industrial DSM program. The value of encouraging HL&P's industrial customers to use any of these technologies will be compared to DSM programs for other customer classes, as well as more traditional generating resource options, before the final selection of electrotechnologies and management practices is made.

Harrell, P. J.; Pavone, A.

1991-06-01T23:59:59.000Z

432

Energy Flow Models for the Steel Industry  

E-Print Network (OSTI)

Energy patterns in the U. S. steel industry are examined using several models. First is an end-use model based on data in the 1994 Manufacturing Energy Consumption Survey (MECS). Then a seven-step process model is presented and material flow through each step is calibrated against Commerce Dept. data. Third, a detailed energy flow model is presented for coke ovens and blast furnaces, two very energy-intensive steps in our seven step model of steelmaking. This process-step model is calibrated against both our energy end use and material flow models. These models can serve as the base case for simulating changes in energy utilization and waste streams for steelmaking spurred by economic or regulatory conditions or technology innovations.

Hyman, B.; Andersen, J. P.

1998-04-01T23:59:59.000Z

433

UTC e-mail  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Koonin, Steven Koonin, Steven Sent: Wednesday, April 20, 2011 8:35 AM To: DL-SC DOE-QER-TEAM Subject: FW: Fuel Cells in the QTR Attachments: Department of Energy Framing Document Ltr 041511.pdf Follow Up Flag: Follow up Flag Status: Flagged Categories: QTR Transparency From: McQuade, J. Michael UTCHQ [mailto:J.Michael.McQuade@utc.com] Sent: Wednesday, April 20, 2011 8:32 AM To: Majumdar, Arun; Koonin, Steven Subject: Fuel Cells in the QTR Steve, Arun, First, a very big compliment to you, Steve, on the quality and depth of the QTR Framing Document that was released for public comment. As you both know better than me, these processes are in many ways defined and constrained by the initial context in which they are communicated, and a terms of reference that misses the mark can make an entire, vital process doomed from the start. We

434

Science Education Mailing Lists  

NLE Websites -- All DOE Office Websites (Extended Search)

programs that are open to the general public. Events, such as the Jefferson Lab Science Series and the Jefferson Lab Open House, will be announced through this list. To...

435

VIA ELECTRONIC MAIL  

E-Print Network (OSTI)

Attached please find comments submitted on behalf of the Bipartisan Policy Center in regards to the 2012 LNG Export Study. Best,

David Rosner; Tracy Terry; Margot Anderson; David Rosner

2013-01-01T23:59:59.000Z

436

Canada Post Publications Mail  

E-Print Network (OSTI)

Commission Dr. Maxine Smith, Memphis Honorable Lana Seivers, Commissioner of Education Mr. William Watkins Buccaneer golfers and coaches,and supporters of the ETSU golf program,for the dedication of The Frederick B.Warren-William

Brownstone, Rob

437

An aerial radiological survey of the Ames Laboratory and surrounding area, Ames, Iowa. Date of survey: July 1991  

Science Conference Proceedings (OSTI)

An aerial radiological survey of the Ames Laboratory and surrounding area in Ames, Iowa, was conducted during the period July 15--25, 1991. The purpose of the survey was to measure and document the terrestrial radiological environment at the Ames Laboratory and the surrounding area for use in effective environmental management and emergency response planning. The aerial survey was flown at an altitude of 200 feet (61 meters) along a series of parallel lines 350 feet (107 meters) apart. The survey encompassed an area of 36 square miles (93 square kilometers) and included the city of Ames, Iowa, and the Iowa State University. The results are reported as exposure rates at 1 meter above ground level (inferred from the aerial data) in the form of a gamma radiation contour map. Typical background exposure rates were found to vary from 7 to 9 microroentgens per hour ({mu}R/h). No anomalous radiation levels were detected at the Ames Laboratory. However, one anomalous radiation source was detected at an industrial storage yard in the city of Ames. In support of the aerial survey, ground-based exposure rate and soil sample measurements were obtained at several sites within the survey perimeter. The results of the aerial and ground-based measurements were found to agree within the expected uncertainty of {+-}15%.

Maurer, R.J.

1993-04-01T23:59:59.000Z

438

Industrial Geospatial Analysis Tool for Energy Evaluation (IGATE-E)  

Science Conference Proceedings (OSTI)

IGATE-E is an energy analysis tool for industrial energy evaluation. The tool applies statistical modeling to multiple publicly available datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using DOE s Industrial Assessment Center database (IAC-DB) and DOE s Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to other commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool provides validation against DOE s EIA-MECS state level energy estimations and permits several statistical examinations. IGATE-E is intended to be a decision support and planning tool to a wide spectrum of energy analysts, researchers, government organizations, private consultants, industry partners, and alike.

Alkadi, Nasr E [ORNL; Starke, Michael R [ORNL; Ma, Ookie [DOE EERE; Nimbalkar, Sachin U [ORNL; Cox, Daryl [ORNL

2013-01-01T23:59:59.000Z

439

Zoe Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Issued: February 9, 2012 Issued: February 9, 2012 BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2011-SW-2912 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Zoe Industries, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated against Respondent pursuant to 10 C.F.R. § 429.122 by Notice of Proposed Civil Penalty, alleging that Respondent distributed in commerce in the United States the Giessdorf eight-jet basic model showerhead, SKU 150043, which failed to meet the applicable standard for water usage. See 10 C.F.R. § 430.32(p). 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement

440

ESCO Industry in China  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ESCO Development in ESCO Development in China China-America EE Forum 2011.5.6, S.F Contents Fast development 1 Great potential 2 Opportunities & Challenges 3 Function of EMCA 4 China Energy Conservation project  Officially started in 1998;  It is a key international cooperation project in the field of energy conservation by Chinese government and World Bank/GEF;  The main purpose of the project is to promote Energy Performance Contracting (EPC) mechanism and develop ESCO industry in China Project progress-1 st phase 3 pilot ESCOs: Beijing Liaoning Shandong Phase I EC information Dissemination Center(ECIDC) Project progress-2 nd phase EMCA Phase II I& G New and Potential ESCOs Technical support Financial support Project Progress- 2 nd Phase EMCA---provide practical technical

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Zoe Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

D.C. 20585 D.C. 20585 ) ) ) ) ) Case Number: 2011-SW-2912 Issued: September 28, 2011 NOTICE OF NONCOMPLIANCE DETERMINATION Manufacturers and private labelers are prohibited from distributing covered products that do not comply with applicable Federal water conservation standards. 10 C.F.R. § 429.102; 42 U.S.C. § 6302. On July 20, 2011, DOE tested four units of the Giessdorf eight-jet basic model showerhead, SKU 150043 ("Giessdorf 150043"), manufactured by GiessdorfPlumbing, Inc. ("Giessdorf"), and imported by Zoe Industries, Inc. ("Zoe"), in accordance with DOE test procedures (10 C.F.R. Part 430, Subpart B, Appendix S). DOE's testing demonstrated that the Giessdorf 150043 model is not in compliance with Federal law. First, Federal water conservation standards require that the water flow for a showerhead

442

End User Perspective - Industrial  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid State Research Center Solid State Research Center DOE Fuel Cell Portable Power Workshop End User Perspective - Industrial Consumer Electronics Power (< 20-50W) Department of Energy Fuel Cell Portable Power Workshop Jerry Hallmark Manager Energy Technologies Lab Motorola Labs Solid State Research Center DOE Fuel Cell Portable Power Workshop Outline * Energy & Power of Portable Devices * Fuel Cell Applications & Cost * Key Requirements & Challenges * Fuels for Portable Fuel Cells * Fuel Transportation Regulations and Standards * Methanol Fuel Cells - Direct Methanol Fuel Cells - Reformed Methanol Fuel Cells * Technical Challenges 2 Solid State Research Center DOE Fuel Cell Portable Power Workshop Portable Electronics Yearly Energy Usage  :KU 1990 1980  :KU

443

and Industry Dynamics  

E-Print Network (OSTI)

We assess the long-run dynamic implications of market-based regulation of carbon dioxide emissions in the US Portland cement industry. We consider several alternative policy designs, including mechanisms that use production subsidies to partially offset compliance costs and border tax adjustments to penalize emissions associated with foreign imports. Our results highlight two general countervailing market distortions. First, following Buchanan (1969), reductions in product market surplus and allocative inefficiencies due to market power in the domestic cement market counteract the social benefits of carbon abatement. Second, tradeexposure to unregulated foreign competitors leads to emissions leakage which offsets domestic emissions reductions. Taken together, these forces result in social welfare losses under policy regimes that fully internalize the emissions externality. In contrast, market-based policies that incorporate design features to mitigate the exercise of market power and emissions leakage can deliver welfare gains. 1

Meredith Fowlie; Mar Reguant; Stephen P. Ryan; Meredith Fowlie; Mar Reguant; Stephen P. Ryan

2013-01-01T23:59:59.000Z

444

Industrial Heat Recovery - 1982  

E-Print Network (OSTI)

Two years ago I summarized 20 years of experience on Industrial Heat Recovery for the Energy-source Technology Conference and Exhibition held in New Orleans, Louisiana. At the end of that paper I concluded with brief advice on 'How to specify heat recovery equipment.' The two years which have elapsed since then have convinced me that proper specification assures the most reliable equipment at the lowest price. The most economical specification describes the operating and site data but leaves the design details for the supplier. A true specialist will be able to provide you with the latest technology at the best possible price. This paper explores the impact of specifications on heat recovery equipment and its associated cost.

Csathy, D.

1982-01-01T23:59:59.000Z

445

Commercial Buildings Energy Consumption Survey (CBECS) - U.S. Energy  

Gasoline and Diesel Fuel Update (EIA)

Survey Background and Technical Information Survey Background and Technical Information Survey Background The commercial sector encompasses a vast range of building types-service businesses, such as retail and wholesale stores, hotels and motels, restaurants, and hospitals, as well as certain buildings that would not be considered "commercial" in a traditional economic sense, such as public and private schools, correctional institutions, and religious and fraternal organizations. Excluded from the sector are the goods-producing industries: manufacturing, agriculture, mining, forestry and fisheries, and construction. Nearly all energy use in the commercial sector takes place in, or is associated with, the buildings that house these commercial activities. Analysis of the structures, activities, and equipment associated with

446

Reflection Survey (Deangelo, Et Al., 1999) | Open Energy Information  

Open Energy Info (EERE)

Deangelo, Et Al., 1999) Deangelo, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Reflection Survey (Deangelo, Et Al., 1999) Exploration Activity Details Location Unspecified Exploration Technique Reflection Survey Activity Date Usefulness useful DOE-funding Unknown Notes We believe we have demonstrated two sources that can generate S-waves that are appropriate for evaluating geothermal prospects. The first, a vector-explosive package, has never been available to the seismic industry, and the demonstration of its source pe References M. DeAngelo, B.A. Hardage, J. L. Simmons Jr. (1999) Development Of Active Seismic Vector-Wavefield Imaging Technology For Geothermal Applications Retrieved from "http://en.openei.org/w/index.php?title=Reflection_Survey_(Deangelo,_Et_Al.,_1999)&oldid=388218

447

Comparison of National Programs for Industrial Energy Efficiency: Industry Brief  

Science Conference Proceedings (OSTI)

This report looks at the Better Buildings, Better Plants program from the Department of Energy; E3, an initiative of five U.S. federal agencies; ENERGY STAR for Industry from the Environmental Protection Agency; and Superior Energy Performance, a product of the U.S. Council for Energy-Efficient Manufacturing. By comparing the goals of several energy-efficiency programs that have been established to support industry, this report hopes to help industrial facilities find the right fit for their own ...

2013-02-25T23:59:59.000Z

448

Research Projects in Industrial Technology.  

Science Conference Proceedings (OSTI)

The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the industrial sector, as well as other sectors, in its 1986 Power Plan. Specifically, the Council recommended that BPA operate a research and development program in conjunction with industry to determine the potential costs and savings from efficiency improvements in industrial processes which apply to a wide array of industrial firms.'' The section, composed of multidisciplinary engineers, provides technical support to the Industrial Programs Branch by designing and carrying out research relating to energy conservation in the industrial sector. The projects contained in this booklet are arranged by sector --industrial, utility, and agricultural -- and, within each sector, chronologically from ongoing to completed, with those projects completed most recently falling first. For each project the following information is given: its objective approach, key findings, cost, and contact person. Completed projects also include the date of completion, a report title, and report number.

United States. Bonneville Power Administration. Industrial Technology Section.

1990-06-01T23:59:59.000Z

449

The RFF Home Energy Audit and Retrofit Survey...............................................................  

E-Print Network (OSTI)

Commercial and residential buildings are responsible for 42 percent of all U.S. energy consumption and 41 percent of U.S. CO2 emissions. Engineering studies identify several investments in new enegy-efficiency equipment or building retrofits that would more than pay for themselves in terms of lower future energy costs, but homeowners and businesses generally do not have good information about how to take advantage of these opportunities. Energy auditors make up a growing industry of professionals who evaluate building energy use and provide this information to building owners. This paper reports the results of a survey of nearly 500 home energy auditors and contractors that Resources for the Future conducted in summer 2011. The survey asked about the characteristics of these businesses and the services they provide, the degree to which homeowners follow up on their recommendations, and the respondents opinions on barriers to home energy retrofits and the role for government. Findings from the survey suggest that the audit industry only partially is filling the information gap. Not enough homeowners know about or understand audits, and the follow-through on recommendations once they do have audits is incomplete. But the survey findings suggest that low energy prices and the high cost of retrofits may be more responsible for these outcomes than failures of information.

Karen Palmer; Margaret Walls; Hal Gordon; Todd Gerarden

2011-01-01T23:59:59.000Z

450

2005 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

5 User Survey Results 5 User Survey Results Show All | 1 2 3 4 5 ... 10 | Next » 2005 User Survey Results Table of Contents Response Summary Respondent Demographics All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software Visualization and Data Analysis Services and Communications Web Interfaces Training Comments about NERSC Response Summary Many thanks to the 201 users who responded to this year's User Survey. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. The survey results are listed below.

451

2000 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

0 User Survey Results 0 User Survey Results Show All | 1 2 3 4 5 ... 10 | Next » 2000 User Survey Results Table of Contents Response Summary User Information Overall Satisfaction and Importance All Satisfaction Questions and FY 1999 to FY 2000 Changes Consulting and Account Support Web and Communications Hardware Resources Software Resources Training User Comments Response Summary NERSC extends its thanks to all the users who participated in this year's survey. Your responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. Every year we institute changes based on the survey; the FY 1999 survey resulted in the following changes: We created a long-running queue (12 hours maximum) for jobs using up

452

2002 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

2 User Survey Results 2 User Survey Results Show All | 1 2 3 4 5 ... 11 | Next » 2002 User Survey Results Table of Contents Response Summary User Information Overall Satisfaction and Importance All Satisfaction Questions and Changes from Previous Years Visualization and Grid Computing Web, NIM, and Communications Hardware Resources Software Training User Services Comments about NERSC Response Summary Many thanks to the 300 users who responded to this year's User Survey -- this represents the highest response level in the five years we have conducted the survey. The respondents represent all five DOE Science Offices and a variety of home institutions: see User Information. You can see the FY 2002 User Survey text, in which users rated us on a 7-point satisfaction scale. Some areas were also rated on a 3-point

453

Energy Department Develops Tool with Industry to Help Utilities Strengthen  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Develops Tool with Industry to Help Utilities Develops Tool with Industry to Help Utilities Strengthen Their Cybersecurity Capabilities Energy Department Develops Tool with Industry to Help Utilities Strengthen Their Cybersecurity Capabilities June 28, 2012 - 10:24am Addthis News Media Contact (202) 586-4940 WASHINGTON -- As part of the Obama Administration's commitment to protecting America's critical energy infrastructure, U.S. Energy Secretary Steven Chu today announced the release of a new Cybersecurity Self-Evaluation Survey Tool for utilities that will strengthen protection of the nation's electric grid from cybersecurity threats. Today's announcement is part of a broader White House initiative to develop a Cybersecurity Capability Maturity Model for the electricity sector, which aims to support the private sector and utilities nationwide in determining

454

FAQs for Survey Forms 809 and 819  

Gasoline and Diesel Fuel Update (EIA)

9 and 819 9 and 819 EIA-809 (Weekly Oxygenate Report) How do I submit the form? There are four ways to submit the EIA-809 form. Secure File Transfer: https://signon.eia.doe.gov/upload/noticeoog.jsp The Secure File Transfer System uses the secure hypertext transfer protocol (HTTPS), an industry standard method to send information over the web using secure, encrypted processes. Electronic Filing Option: The PC Electronic Data Reporting Option (PEDRO) is a Windows-based application that will enable you to enter data interactively, import data from your own database, validate your data online, and transmit the encrypted data electronically to EIA via the Internet or a dial-up modem. To receive this free software call (202) 586-9659. Email: oog.surveys@eia.gov Fax forms to: (202) 586-1076

455

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 Project lnfonnation Project Title: Change out down guy on power pole Date: 2-8-10 DOE Code : Contractor Code: Project Lead: Mike Preston Project Overview 1 What are the environmental No impact to the environment impacts? Power pole east of B-1 -33 2. What is the legal location? 3. What is the duration of the project? 3Hr 4. What major equipment will be used if any (worl< over rig, drilling rig, Backhoe and operator for equ1 pment etc.)? The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE; If ChiingSurvey alld contact Ut TlrCh.,lcal Assunlnce DepartmenL Impacts If YES, then complete below

456

Fermilab Prairie Plant Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Crack the Quadrat* Code! Crack the Quadrat* Code! compass plasnt * What is a Quadrat? It's a one-meter square plot. Plants in the quadrat are identified and counted. Fermilab quadrat specialists can! Attention Citizen Scientists Are you a prairie enthusiast? Learn scientific plant monitoring techniques while enjoying our beautiful prairie. Join a unique science program open to the public, adult groups, families, scouts and more …. Become a prairie quadrat specialist and do real science at Fermilab! In the Fermilab Prairie Plant Survey you will learn how to identify prairie plants, map a prairie plot and track restoration progress along with our experts. Use our Website to contribute data you collect. Come once or come back two or three times to see how the prairie changes. Keep an eye on this prairie for years to come!

457

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 Project lnfonnation Project Title: New Drilling Location in Section 29 Date: 12-10-2009 DOE Code: 6730.020.78002 Contractor Code: 8067-371 Project Lead: Mark Duletsky Project Overview The project will involve excavating 3-4 backhoe pits to a depth of about 8 feet to observe soil characteristics 1. What are the environmental impacts? in the vicinity of our planned reserve pit excavation area. 2. What is the legal location? NE 1/4, SE 1/4, Sec. 29. T39N. R78W. Natrona County, Wyoming 3. What is the duration of the project? 4. What major equipment will be used 1 day if any (work over rig, drilling rig, etc.)? Backhoe The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

458

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 Project lnfonnation Project Title: C-EAG. Maintenance I grading of existing roads Date: 8/4/2011 and road drainages (barrow ditches): ex 81.3 DOE Code: Contractor Code: Project Lead: Michael J. Taylor [NCO] Project Overview 1. Brief project description [include C-EA 6. Maintenance I grading of existing roads and road drai nages anything that could impact the (barrow ditches) : ex 81.3 environment] Existing roads defined as per May 2010 Aerial Photos. (Changing out culverts, grading I modifying embankments, etc., that has potential to impact wetlands, requires a NCS.) The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

459

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 Project lnfonnation Project Title: Restoration of 77 -13-SX-3 Date: 2-8-1 0 DOE Code: Contractor Code: Project Lead: Jeff Jones Project Overview We will be restoring 77-SX-3 per procedure. 1. What are the environmental impacts? The duration of this project will be 3-4 days. 2. What is the leg al location? 3. What is the duration of the project? The equipment to be used will be Backhoe, welder, tiller dump truck. 4. What major equipment will be used if any (work over rig , drilling rig , We will take oil contaminated dirt to the Eastside landfarm and backfill with d ean fill dirt from sec. 20. etc.)? The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

460

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 Project lnfonnation Project Title: e-EA5. Reclamation of well sites Date: 8/4/2011 DOE Code: Contractor Code: Project Lead: Michael J. Taylor [NCO] Project Overview e-EA 5. Reclamation of wellsites : ex 81.3 and ex 86.1 1. Brief project description [include anything that could impact the Small-scale, short-term cleanup actions including excavation and environment] consolidation of contaminated soils, removal of underground piping, removal of rig anchors or T-bars, drainage control , transport and backfilling of clean soil I fill dirt, and reseeding . The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

SURVEY OF FALLOUT OPERATIONS  

SciTech Connect

A survey was made of fall-out operations in the various countries of the world, These operations are outlined by country. The source of information has largely been the reports submitted to UNSCEAR forwarding data for their consideration. In addition, some material has been received directly in exchange for HASL Quarterlies and other publications of the Laboratory. In many cases, responsible scientists from the country concerned have reviewed the sheets and have made corrections. All of the programs that are shown have been and are subject to modification as time goes on, thus, the data indicate the status of the program as of 1961. No attempt has been made to list re search projects or special fall-out measurements and only programs of a continuing nature have been covered. (auth)

1962-07-01T23:59:59.000Z

462

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Project l nfonnation Project Title: Reclamation ofT-2-14 Date: 11/2412009 DOE Code: Contractor Code: Project Lead: Jeff Jones Project Overview We will be removing old piping from the treater@ T-2-14. We will also remove the berm and grade and 1. What are the environmental impacts? reclamate location. The duration of this project will be approx. 2 days. Equipment that will be used is as follows backhoe. dumptruck, blade,and a tiller so we can seed with native grasses. 2. What is the legal location? 3. What is the duration of the project? 4. What major equipment will be used if any (woO< over rig, drilling rig, etc.)? The table below Is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

463

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 0 Project lnfonnation Project Title: Replace electrical line from well to power pole Date: 3/10/2010 DOE Code: Contractor Code: Project Lead: Mike Preston Project Overview No impact to the environment. 1. What are the environmental impacts? Dig up old electrical line from pumping unit on 61-S-34 to power pole east of well , {approximately 75 feet 2. What is the legal location? from unit) and replace with new line. 3. What is the duration of the project? 4. What major equipment will be used 1 day if any (work over rig , drilling rig , etc.)? Electrician, ditch witch and operator for equipment The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

464

Naming the pain in requirements engineering: design of a global family of surveys and first results from Germany  

Science Conference Proceedings (OSTI)

Context: For many years, we have observed industry struggling in defining a high quality requirements engineering (RE) and researchers trying to understand industrial expectations and problems. Although we are investigating the discipline with ... Keywords: family of studies, requirements engineering, survey research

Daniel Mndez Fernndez; Stefan Wagner

2013-04-01T23:59:59.000Z

465

Tobacco Industry Political Activity in Colorado 1979-1995  

E-Print Network (OSTI)

7 TOBACCO INDUSTRY POLITICALcontrol. * Increased tobacco industry political spending atlocal communities. * The tobacco industry seeks preemptive

Monardi, Fred M. Ph.D.; O'Neill, Amanda; Glantz, Stanton A. Ph.D.

1996-01-01T23:59:59.000Z

466

Tobacco Industry Interference with Tobacco Control  

E-Print Network (OSTI)

143. Bero L. Tobacco industry manipulation of research.Glantz SA. German tobacco industrys successful efforts toBarnoya J, Glantz S. Tobacco industry success in preventing

World Health Organization

2009-01-01T23:59:59.000Z

467

2001 Residential Energy Consumption Survey  

U.S. Energy Information Administration (EIA)

Residential Energy Consumption Survey ... Office of Management and Budget, Washington, DC 20503. Form EIA-457A (2001) Form Approval: OMB No. 1905-0092 ...

468

RESIDENTIAL ENERGY CONSUMPTION SURVEY 1997  

U.S. Energy Information Administration (EIA)

RESIDENTIAL ENERGY CONSUMPTION SURVEY 1997. OVERVIEW: MOST POPULOUS STATES ... Homes with air-conditioning: 95%... with a central air-conditioning system: 83%

469

industrial sector | OpenEI  

Open Energy Info (EERE)

industrial sector industrial sector Dataset Summary Description Biomass energy consumption and electricity net generation in the industrial sector by industry and energy source in 2008. This data is published and compiled by the U.S. Energy Information Administration (EIA). Source EIA Date Released August 01st, 2010 (4 years ago) Date Updated August 01st, 2010 (4 years ago) Keywords 2008 biomass consumption industrial sector Data application/vnd.ms-excel icon industrial_biomass_energy_consumption_and_electricity_2008.xls (xls, 27.6 KiB) Quality Metrics Level of Review Peer Reviewed Comment Temporal and Spatial Coverage Frequency Annually Time Period 2008 License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset Usefulness of the metadata

470

User Facilities for Industry 101  

NLE Websites -- All DOE Office Websites (Extended Search)

Satellite!Workshop!10!-!User!Facilities!for!Industry!101! Satellite!Workshop!10!-!User!Facilities!for!Industry!101! Organizers:+Andreas+Roelofs+(CNM),+Jyotsana+Lal+(APS),+Katie+Carrado+Gregar+(CNM),+and+Susan+Strasser+ (APS)! ! In! order! to! increase! awareness! of! the! industrial! community! to! Argonne! National! Laboratory! user! facilities,!the!Advanced!Photon!Source!(APS),!the!Center!for!Nanoscale!Materials!(CNM)!and!the!Electron! Microscopy!Center!(EMC)!welcomed!industrial!scientists,!engineers!and!related!professionals!to!a!oneC day! workshop! to! learn! more! about! Argonne's! National! Laboratory! and! the! capabilities/techniques! available! for! their! use.! The! workshop! showcased! several! successful! industrial! user! experiments,! and! explained! the! different! ways! in! which! industrial! scientists! can! work! at! Argonne! or! with! Argonne!

471

Industry Profile | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industry Profile Industry Profile Industry Profile November 1, 2013 - 11:40am Addthis The largest energy consuming industrial sectors account for the largest share of CHP capacity; namely: Chemicals (30%), Petroleum Refining (17%), and Paper Products (14%). Other industrial sectors include: Commercial/Institutional (12%), Food (8%), Primary Metals (5%), Other Manufacturing (8%), and Other Industrial (6%). Combined heat and power (CHP)-sometimes referred to as cogeneration-involves the sequential process of producing and utilizing electricity and thermal energy from a single fuel. CHP is widely recognized to save energy and costs, while reducing carbon dioxide (CO2) and other pollutants. CHP is a realistic, near-term option for large energy efficiency improvements and significant CO2 reductions.

472

Demand Response Opportunities in Industrial Refrigerated Warehouses...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Response Opportunities in Industrial Refrigerated Warehouses in California Title Demand Response Opportunities in Industrial Refrigerated Warehouses in California...

473

Midstate Electric Cooperative - Commercial and Industrial Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial and Industrial Energy Efficiency Rebate Program Midstate Electric Cooperative - Commercial and Industrial Energy Efficiency Rebate Program Eligibility Commercial...

474

Industrial Energy Efficiency:Policy, Initiatives, & Opportunities...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency:Policy, Initiatives, & Opportunities Industrial Energy Efficiency:Policy, Initiatives, & Opportunities presentation Industrial Energy Efficiency:Policy, Initiatives, &...

475

NIST Medical-Industrial Radiation Facility  

Science Conference Proceedings (OSTI)

Medical-Industrial Radiation Facility. ... Radiation hardness testing; Electron-beam sterilization; Beam diagnostics; Industrial CT scanning. ...

476

Carbon Emissions: Food Industry - Energy Information Administration  

U.S. Energy Information Administration (EIA)

The wet corn milling industry emits almost a sixth of the energy-related carbon in the food industry. ...

477

Exhibitor: SAINT GOBAIN INDUSTRIAL CERAMICS NORTON ...  

Science Conference Proceedings (OSTI)

SAINT GOBAIN INDUSTRIAL CERAMICS NORTON PRIMARY METALS ... Norton refractory products for the copper industry include shaft furnace liners, bricks,...

478

Barron Electric Cooperative - Commercial, Industrial, and Agricultural...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial, and Agricultural Energy Efficiency Rebate Program Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program...

479

Industry Interactive Procurement System (IIPS)  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry Interactive Industry Interactive Industry Interactive Industry Interactive Procurement System Procurement System (IIPS) (IIPS) Douglas Baptist, Project Manager Information Management Systems Division US Department of Energy IIPS Functions Issue synopses, solicitations and related documents via the Internet Receive and Respond to Solicitation Specific Questions Receive proposal, bid or application information electronically Provide access to proposal information to authorized personnel through a web browser Conduct negotiations or obtain clarifications Issue award documents IIPS Security Security Plan in place and approved by DOE's Chief Information Officer System security tested by DOE's Computer Incident Advisory Capability team Security measures include: - Encryption on the IIPS server

480

Industrial energy management | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify...

Note: This page contains sample records for the topic "industry survey mailing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Industry-Lab Research Opportunities  

Partnering With Berkeley Lab: Industry-Lab Research Opportunities. Some of the most innovative technology transfer at Berkeley Lab involves collaborative projects ...

482

Technology Commercialization Showcase 2008: Industrial ...  

Source: McKinsey & Company, 2007. Industry represents 38% of the total global opportunity to reduce energy demand: 6 Agenda Market Overview ...

483

AMO Industrial Distributed Energy: Partnerships  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

energy efficiency by 2020. The Industrial Energy EfficiencyCombined Heat & Power Working Group is developing a number of resources. News Energy Department Invests in...

484

Industrial SPP / Partner Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Cascade Energy Engineering 5257 NE MLK Jr. Blvd, Suite 301 Portland, OR 97211 Business: Industrial Energy Efficiency Dan Brown, Vice President Phone: 503-287-8488 Email:...

485

Carbon Emissions: Petroleum Refining Industry  

U.S. Energy Information Administration (EIA)

Energy-Related Carbon Emissions for the Petroleum and Coal Products Industry, 1994. Petroleum refining is by far the largest component of the petroleum and ...

486

Greenline Industries | Open Energy Information  

Open Energy Info (EERE)

Industries Place San Rafael, California Zip 94901 Product Small to medium scale biodiesel plants designer and producer. They also run a biodiesel plant in Vallejo,...

487

Shrenik Industries | Open Energy Information  

Open Energy Info (EERE)

India Zip 416 109 Sector Wind energy Product Maharashtra-based wind turbine tower manufacturer and subsidiary of the Sanjay Ghodawat Group of Industries. References...

488

DMI Industries | Open Energy Information  

Open Energy Info (EERE)

OTTR), is a diversified heavy steel manufacturer with a primary concentration on wind tower fabrication. References DMI Industries1 LinkedIn Connections CrunchBase Profile No...

489

Ventower Industries | Open Energy Information  

Open Energy Info (EERE)

Place Monroe, Michigan Zip 48161 Sector Wind energy Product Michigan-based wind turbine tower manufacturer. References Ventower Industries1 LinkedIn Connections CrunchBase...

490

Industry and Related Associations - TMS  

Science Conference Proceedings (OSTI)

The web site of IPC: Association Connecting Electronics Industries, 0, 883, Christina Raabe Eck, 2/12/2007 12:48 PM by Todd Osman. New Messages, Rating...

491

Tech Transfer - Industrial Partnerships Office  

LLNL-industry consortium advances high performance computing. A prototype computer system is demonstrating the use of flash memory in supercomputing.

492

California Industrial Energy Efficiency Potential  

E-Print Network (OSTI)

sponsored avoided cost studies, energy efficiency programat various costs is with energy efficiency supply curves.Energy Efficiency in Industry Table 4 summarizes the benefit-cost

Coito, Fred; Worrell, Ernst; Price, Lynn; Masanet, Eric; Rafael Friedmann; Rufo, Mike

2005-01-01T23:59:59.000Z

493

Eolica Industrial | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Name Eolica Industrial Place Sao Paulo, Sao Paulo, Brazil Zip 01020-901 Sector Wind energy Product Brazil based wind turbine steel towers and...

494

Industrial Carbon Capture Project Selections  

Energy.gov (U.S. Department of Energy (DOE))

Industrial Carbon Capture Project SelectionsSeptember 2, 2010These projects have been selected for negotiation of awards; final award amounts may vary.

495

Industrial Relations | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

and introduce technologies to the private sector. How Industry Can Work with Argonne Argonne has many types of contractual agreements to meet the needs and interests of...

496

Industries in focus | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

ENERGY STAR Energy Performance Indicators for plants Industries in focus Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers...

497

Energy Savings in Industrial Buildings  

E-Print Network (OSTI)

The industrial sector accounts for more than one-third of total energy use in the United States and emits 28.7 percent of the countrys greenhouse gases. Energy use in the industrial sector is largely for steam and process heating systems, and electricity for equipment such as pumps, air compressors, and fans. Lesser, yet significant, amounts of energy are used for industrial buildings heating, ventilation, and air conditioning (HVAC), lighting and facility use (such as office equipment). Due to economic growth, energy consumption in the industrial sector will continue to increase gradually, as will energy use in industrial buildings. There is a large potential for energy saving and carbon intensity reduction by improving HVAC, lighting, and other aspects of building operation and technologies. Analyses show that most of the technologies and measures to save energy in buildings would be cost-effective with attractive rates of return. First, this paper will investigate energy performance in buildings within the manufacturing sector, as classified in the North American Industry Classification System (NAICS). Energy use patterns for HVAC and lighting in industrial buildings vary dramatically across different manufacturing sectors. For example, food manufacturing uses more electricity for HVAC than does apparel manufacturing because of the different energy demand patterns. Energy saving opportunities and potential from industrial buildings will also be identified and evaluated. Lastly, barriers for deployment of energy savings technologies will be explored along with recommendations for policies to promote energy efficiency in industrial buildings.

Zhou, A.; Tutterow, V.; Harris, J.

2009-05-01T23:59:59.000Z

498

ENERGY STAR Challenge for Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Challenge for Industry Professional Engineers' Guide for Validating Statements of Energy Improvement Office of Air and Radiation Climate Protection Partnerships Division May 2013...

499

NREL: Energy Storage - Industry Participants  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry Participants NREL's energy storage project is funded by the DOE's Vehicle Technologies Office. We work closely with automobile manufacturers, energy storage developers,...

500

Results and Analysis of EPRI Utility Survey on Experiences of Composite Products  

Science Conference Proceedings (OSTI)

This report covers the results and analysis of a North American utility survey on the experience of polymer-based / composite products and apparatus used in transmission class (69 - 765 kV) substations. The survey addresses many topics that are of general interest to utilities such as: Standards (internal or industry) that may have been used to purchase these apparatus. Laboratory and field trial investigations undertaken by utilities to determine whether the apparatus was suitable for thei...

2004-12-12T23:59:59.000Z