Sample records for industry aeo2006 extends

  1. Changing Trends in the Refining Industry (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    There have been some major changes in the U.S. refining industry recently, prompted in part by a significant decline in the quality of imported crude oil and by increasing restrictions on the quality of finished products. As a result, high-quality crudes, such as the West Texas Intermediate (WTI) crude that serves as a benchmark for oil futures on the New York Mercantile Exchange (NYMEX), have been trading at record premiums to the OPEC (Organization of the Petroleum Exporting Countries) Basket price.

  2. World Oil Prices in AEO2006 (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    World oil prices in the Annual Energy Outlook 2006 (AEO) reference case are substantially higher than those in the AEO2005 reference case. In the AEO2006 reference case, world crude oil prices, in terms of the average price of imported low-sulfur, light crude oil to U.S. refiners, decline from current levels to about $47 per barrel (2004 dollars) in 2014, then rise to $54 per barrel in 2025 and $57 per barrel in 2030. The price in 2025 is approximately $21 per barrel higher than the corresponding price projection in the AEO2005 reference case.

  3. Comparison of AEO 2006 Natural Gas Price Forecast to NYMEX Futures Prices

    E-Print Network [OSTI]

    Bolinger, Mark; Wiser, Ryan

    2005-01-01T23:59:59.000Z

    Gas Price Forecast W ith natural gas prices significantlyof AEO 2006 Natural Gas Price Forecast to NYMEX Futurescase long-term natural gas price forecasts from the AEO

  4. Comparison of AEO 2006 Natural Gas Price Forecast to NYMEX Futures Prices

    E-Print Network [OSTI]

    Bolinger, Mark; Wiser, Ryan

    2005-01-01T23:59:59.000Z

    Comparison of AEO 2006 Natural Gas Price Forecast to NYMEXs reference case long-term natural gas price forecasts fromAEO series to contemporaneous natural gas prices that can be

  5. Comparison of AEO 2006 Natural Gas Price Forecast to NYMEX FuturesPrices

    SciTech Connect (OSTI)

    Bolinger, Mark; Wiser, Ryan

    2005-12-19T23:59:59.000Z

    On December 12, 2005, the reference case projections from ''Annual Energy Outlook 2006'' (AEO 2006) were posted on the Energy Information Administration's (EIA) web site. We at LBNL have in the past compared the EIA's reference case long-term natural gas price forecasts from the AEO series to contemporaneous natural gas prices that can be locked in through the forward market, with the goal of better understanding fuel price risk and the role that renewables play in mitigating such risk (see, for example, http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf). As such, we were curious to see how the latest AEO gas price forecast compares to the NYMEX natural gas futures strip. This brief memo presents our findings. As a refresher, our past work in this area has found that over the past five years, forward natural gas contracts (with prices that can be locked in--e.g., gas futures, swaps, and physical supply) have traded at a premium relative to contemporaneous long-term reference case gas price forecasts from the EIA. As such, we have concluded that, over the past five years at least, levelized cost comparisons of fixed-price renewable generation with variable price gas-fired generation that have been based on AEO natural gas price forecasts (rather than forward prices) have yielded results that are ''biased'' in favor of gas-fired generation, presuming that long-term price stability is valued. In this memo we simply update our past analysis to include the latest long-term gas price forecast from the EIA, as contained in AEO 2006. For the sake of brevity, we do not rehash information (on methodology, potential explanations for the premiums, etc.) contained in our earlier reports on this topic; readers interested in such information are encouraged to download that work from http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf. As was the case in the past five AEO releases (AEO 2001-AEO 2005), we once again find that the AEO 2006 reference case gas price forecast falls well below where NYMEX natural gas futures contracts were trading at the time the EIA finalized its gas price forecast. In fact, the NYMEX-AEO 2006 reference case comparison yields by far the largest premium--$2.3/MMBtu levelized over five years--that we have seen over the last six years. In other words, on average, one would have had to pay $2.3/MMBtu more than the AEO 2006 reference case natural gas price forecast in order to lock in natural gas prices over the coming five years and thereby replicate the price stability provided intrinsically by fixed-price renewable generation (or other forms of generation whose costs are not tied to the price of natural gas). Fixed-price generation (like certain forms of renewable generation) obviously need not bear this added cost, and moreover can provide price stability for terms well in excess of five years.

  6. An Analysis of Two Industrial Assessment Center Extended Assessments

    E-Print Network [OSTI]

    Farouz, H. E.; Gafford, G. D.; Eggebrecht, J. A.; Heffington, W. M.

    The Industrial Assessment Center at Texas A&M University extended assessments by spending about two extra days at each of three manufacturing plants. The extended assessments are characterized by use of sophisticated electronic monitoring equipment...

  7. Industrial Sector Energy Demand: Revisions for Non-Energy-Intensive Manufacturing (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01T23:59:59.000Z

    For the industrial sector, the Energy Information Administration's (EIA) analysis and projection efforts generally have focused on the energy-intensive industriesfood, bulk chemicals, refining, glass, cement, steel, and aluminumwhere energy cost averages 4.8% of annual operating cost. Detailed process flows and energy intensity indicators have been developed for narrowly defined industry groups in the energy-intensive manufacturing sector. The non-energy-intensive manufacturing industries, where energy cost averages 1.9% of annual operating cost, previously have received somewhat less attention, however. In Annual Energy Outlook 2006 (AEO), energy demand projections were provided for two broadly aggregated industry groups in the non-energy-intensive manufacturing sector: metal-based durables and other non-energy-intensive. In the AEO2006 projections, the two groups accounted for more than 50% of the projected increase in industrial natural gas consumption from 2004 to 2030.

  8. Nonconventional Liquid Fuels (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    Higher prices for crude oil and refined petroleum products are opening the door for nonconventional liquids to displace petroleum in the traditional fuel supply mix. Growing world demand for diesel fuel is helping to jump-start the trend toward increasing production of nonconventional liquids, and technological advances are making the nonconventional alternatives more viable commercially. Those trends are reflected in the Annual Energy Outlook 2006 projections.

  9. Mercury Emissions Control Technologies (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    The Annual Energy Outlook 2006 reference case assumes that states will comply with the requirements of the Environmental Protection Agency's new Clean Air Mercury Rule (CAMR) regulation. CAMR is a two-phase program, with a Phase I cap of 38 tons of mercury emitted from all U.S. power plants in 2010 and a Phase II cap of 15 tons in 2018. Mercury emissions in the electricity generation sector in 2003 are estimated at around 50 tons. Generators have a variety of options to meet the mercury limits, such as: switching to coal with a lower mercury content, relying on flue gas desulfurization or selective catalytic reduction equipment to reduce mercury emissions, or installing conventional activated carbon injection (ACI) technology.

  10. Federal Air Emissions Regulations (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    In 2005, the Environmental Protection Agency (EPA) finalized two regulations, the Clean Air Interstate Rule (CAIR) and the Clean Air Mercury Rule CAMR, that would reduce emissions from coal-fired power plants in the United States. Both CAIR and CAMR are included in the Annual Energy Outlook 2006 reference case. The EPA has received 11 petitions for reconsideration of CAIR and has provided an opportunity for public comment on reconsidering certain aspects of CAIR. Public comments were accepted until January 13, 2006. The EPA has also received 14 petitions for reconsideration of CAMR and is willing to reconsider certain aspects of the rule. Public comments were accepted for 45 days after publication of the reconsideration notice in the Federal Register. Several states and organizations have filed lawsuits against CAMR. The ultimate decision of the courts will have a significant impact on the implementation of CAMR.

  11. Energy Policy Act 2005 Summary (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    The U.S. House of Representatives passed H.R. 6 EH, the Energy Policy Act of 2005, on April 21, 2005, and the Senate passed H.R. 6 EAS on June 28, 2005. A conference committee was convened to resolve differences between the two bills, and a report was approved and issued on July 27, 2005. The House approved the conference report on July 28, 2005, and the Senate followed on July 29, 2005. EPACT2005 was signed into law by President Bush on August 8, 2005, and became Public Law 109-058.

  12. Energy Technologies on the Horizon (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    A key issue in mid-term forecasting is the representation of changing and developing technologies. How existing technologies will evolve, and what new technologies might emerge, cannot be known with certainty. The issue is of particular importance in Annual Energy Outlook 2006 (AEO), the first AEO with projections out to 2030.

  13. Economic Effects of High Oil Prices (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    The Annual Energy Outlook 2006 projections of future energy market conditions reflect the effects of oil prices on the macroeconomic variables that affect oil demand, in particular, and energy demand in general. The variables include real gross domestic product (GDP) growth, inflation, employment, exports and imports, and interest rates.

  14. Development of a New Extended Motor Product Label for Industrial Energy Efficiency

    E-Print Network [OSTI]

    Rogers, E.; Boteler, R.; Elliot, R. N.

    2014-01-01T23:59:59.000Z

    opportunities ESL-IE-14-05-11 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 Prescriptive Rebate Programs Provides a rebate for specific products that have been determined to be more efficient... of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 Example: Prescriptive Rebates Example: NEMA Premium ® • Label identifies highest efficiency motors • Label is acceptable documentation for efficiency programs...

  15. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    SHIP - Solar heat for industrial processes. Internationalsolar power could be used to provide process heat for

  16. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    oil, starch and corn refining, since these can be a source of fuel products. The sugar cane industry

  17. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

  18. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    iron and steel production. IEA Greenhouse Gas R&D Programme,tempera- ture range. IEA/Caddet, Sittard, The Netherlands.industry. Cheltenham, UK, IEA Greenhouse Gas R&D Programme,

  19. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    process residual like bagasse are now available (Cornland etsugar in- dustry uses bagasse and the edible oils industrySection 7.4.7. ). The use of bagasse for energy is likely to

  20. Industry

    SciTech Connect (OSTI)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01T23:59:59.000Z

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  1. Understanding and Evaluating Extended Surfaces

    E-Print Network [OSTI]

    Ganapathy, V.

    Extended surfaces are widely used in heat transfer equipment in power and process plants. While various types of extended surfaces are used in the industry, this paper will limit the discussions to the widely used configurations in heat recovery...

  2. State Air Emission Regulations That Affect Electric Power Producers (Update) (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    Several states have recently enacted air emission regulations that will affect the electricity generation sector. The regulations govern emissions of NOx, SO2, CO2, and mercury from power plants.

  3. U.S. Greenhouse Gas Intensity and the Global Climate Change Initiative (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    On February 14, 2002, President Bush announced the Administrations Global Climate Change Initiative. A key goal of the Climate Change Initiative is to reduce U.S. greenhouse gas (GHG) intensity-defined as the ratio of total U.S. GHG emissions to economic output-by 18% over the 2002 to 2012 time frame.

  4. Volumetric Excise Tax Credit for Alternative Fuels (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    On August 10, 2005, President Bush signed into law the Safe, Accountable, Flexible, and Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU)]. The act includes authorization for a multitude of transportation infrastructure projects, establishes highway safety provisions, provides for research and development, and includes a large number of miscellaneous provisions related to transportation, most of which are not included in Annual Energy Outlook 2006 because their energy impacts are vague or undefined.

  5. State Renewable Energy Requirements and Goals: Update Through 2005 (Update) (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    Annual Energy Outlook 2005 provided a summary of 17 state renewable energy programs in existence as of December 31, 2003, in 15 states.

  6. State Restrictions on Methyl Tertiary Butyl Ether (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    By the end of 2005, 25 states had barred, or passed laws banning, any more than trace levels of methyl tertiary butyl ether (MTBE) in their gasoline supplies, and legislation to ban MTBE was pending in 4 others. Some state laws address only MTBE; others also address ethers such as ethyl tertiary butyl ether (ETBE) and tertiary amyl methyl ether (TAME). Annual Energy Outlook 2006 assumes that all state MTBE bans prohibit the use of all ethers for gasoline blending.

  7. Advanced Technologies for Light-Duty Vehicles (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    A fundamental concern in projecting the future attributes of light-duty vehicles-passenger cars, sport utility vehicles, pickup trucks, and minivans-is how to represent technological change and the market forces that drive it. There is always considerable uncertainty about the evolution of existing technologies, what new technologies might emerge, and how consumer preferences might influence the direction of change. Most of the new and emerging technologies expected to affect the performance and fuel use of light-duty vehicles over the next 25 years are represented in the National Energy Modeling System (NEMS); however, the potential emergence of new, unforeseen technologies makes it impossible to address all the technology options that could come into play. The previous section of Issues in Focus discussed several potential technologies that currently are not represented in NEMS. This section discusses some of the key technologies represented in NEMS that are expected to be implemented in light-duty vehicles over the next 25 years.

  8. Update on Transition to Ultra-Low-Sulfur Diesel Fuel (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    On November 8, 2005, the Environmental Protection Agency (EPA) Administrator signed a direct final rule that will shift the retail compliance date for offering ultra-low sulfur diesel (ULSD) for highway use from September 1, 2006, to October 15, 2006. The change will allow more time for retail outlets and terminals to comply with the new 15 parts per million (ppm) sulfur standard, providing time for entities in the diesel fuel distribution system to flush higher sulfur fuel out of the system during the transition. Terminals will have until September 1, 2006, to complete their transitions to ULSD. The previous deadline was July 15, 2006.

  9. California Greenhouse Gas Emissions Standards for Light-Duty Vehicles (Update) (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    The state of California was given authority under the Clean Air Act Amendments of 1990 (CAAA90) to set emissions standards for light-duty vehicles that exceed federal standards. In addition, other states that do not comply with the National Ambient Air Quality Standards (NAAQS) set by the Environmental Protection Agency under CAAA90 were given the option to adopt Californias light-duty vehicle emissions standards in order to achieve air quality compliance. CAAA90 specifically identifies hydrocarbon, carbon monoxide, and NOx as vehicle-related air pollutants that can be regulated. California has led the nation in developing stricter vehicle emissions standards, and other states have adopted the California standards.

  10. Proposed Revisions to Light Truck Fuel Economy Standard (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    In August 2005, the National Highway Traffic Safety Administration (NHTSA) published proposed reforms to the structure of CAFE standards for light trucks and increases in light truck Corporate Average Fuel Economy (CAFE) standards for model years 2008 through 201. Under the proposed new structure, NHTSA would establish minimum fuel economy levels for six size categories defined by the vehicle footprint (wheelbase multiplied by track width), as summarized in Table 3. For model years 2008 through 2010, the new CAFE standards would provide manufacturers the option of complying with either the standards defined for each individual footprint category or a proposed average light truck fleet standard of 22.5 miles per gallon in 2008, 23.1 miles per gallon in 2009, and 23.5 miles per gallon in 2010. All light truck manufacturers would be required to meet an overall standard based on sales within each individual footprint category after model year 2010.

  11. Limitations of extended reach drilling in deepwater

    E-Print Network [OSTI]

    Akinfenwa, Akinwunmi Adebayo

    2000-01-01T23:59:59.000Z

    As the worldwide search for hydrocarbons continues into the deepwater of the oceans, drilling extended reach wells have helped to drain the fields in the most cost effective way, thus providing the oil and gas industry the cushion to cope...

  12. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Obeying Environmental Laws Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the...

  13. Industrial Engineering Industrial Advisory Board

    E-Print Network [OSTI]

    Gelfond, Michael

    Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

  14. Extended Lyapunov exponents

    SciTech Connect (OSTI)

    Wiesel, W.E. (Air Force Institute of Technology, Wright-Patterson Air Force Base, Ohio 45433 (United States))

    1992-12-15T23:59:59.000Z

    The definition of a Lyapunov exponent can be extended to include an imaginary part. This extension requires the definition of a coordinate frame on the tangent space of the differential equation and an extension of the concept of a limit. The definition of extended Lyapunov exponents is based on the eigenvalues of the fundamental matrix. It is shown that the extended exponent agrees completely with the constant-coefficient case. It is shown that the eigenvectors and eigenvalues obey differential equations and can be propagated numerically without constructing the fundamental matrix itself. Bifurcation of eigenvalues and eigenvectors can also be followed numerically without recourse to the fundamental matrix. Two example applications of the method to the calculation of extended Lyapunov exponents are given. In the Lorenz problem, the real parts of the extended Lyapunov exponents agree quite well with previous results. Fourier-transform methods are used to show that the power spectrum of relative motion is discrete, with fundamental frequency quite close to the calculated imaginary part of the extended Lyapunov exponent. In the simple pendulum, the extended Lyapunov exponents are usually purely imaginary and are the relative oscillation frequencies of adjacent trajectories.

  15. Extended quantum color coding

    SciTech Connect (OSTI)

    Hayashi, A.; Hashimoto, T.; Horibe, M. [Department of Applied Physics, Fukui University, Fukui 910-8507 (Japan)

    2005-01-01T23:59:59.000Z

    The quantum color coding scheme proposed by Korff and Kempe [e-print quant-ph/0405086] is easily extended so that the color coding quantum system is allowed to be entangled with an extra auxiliary quantum system. It is shown that in the extended scheme we need only {approx}2{radical}(N) quantum colors to order N objects in large N limit, whereas {approx}N/e quantum colors are required in the original nonextended version. The maximum success probability has asymptotics expressed by the Tracy-Widom distribution of the largest eigenvalue of a random Gaussian unitary ensemble (GUE) matrix.

  16. OTHER INDUSTRIES

    Broader source: Energy.gov [DOE]

    AMO funded research results in novel technologies in diverse industries beyond the most energy intensive ones within the U.S. Manufacturing sector. These technologies offer quantifiable energy...

  17. ARM - SGP Extended Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP :ProductsVaisala CL51InstrumentsCentral Facility SGP RelatedExtended

  18. Coldwater Extended Facility #8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t zManufacturing:DOECoachIndustrial

  19. Emulsified industrial oils recycling

    SciTech Connect (OSTI)

    Gabris, T.

    1982-04-01T23:59:59.000Z

    The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

  20. EXTENDED FORMULATIONS FOR INDEPENDENCE POLYTOPES ...

    E-Print Network [OSTI]

    2015-04-15T23:59:59.000Z

    1. Introduction. The theory of extended formulations deals with the concept ... contains basic definitions and facts about linear and regular matroids including 1-

  1. MIT and Automotive Industries MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    MIT and Automotive Industries MIT Industry Brief MIT's Industrial Liaison Program (ILP) can bring@ilp.mit.edu, or visit http://ilp-www.mit.edu. MIT and Automotive Industries The Massachusetts Institute of Technology (MIT) is a leading center of research and education on topics important to the automotive industry

  2. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users The

  3. Industry @ ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users

  4. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFP »summerlectures [ICO]default Sign InIndustrial

  5. Extender for securing a closure

    DOE Patents [OSTI]

    Thomas, II, Patrick A.

    2012-10-02T23:59:59.000Z

    An apparatus for securing a closure such as door or a window that opens and closes by movement relative to a fixed structure such as a wall or a floor. Many embodiments provide a device for relocating a padlock from its normal location where it secures a fastener (such as a hasp) to a location for the padlock that is more accessible for locking and unlocking the padlock. Typically an extender is provided, where the extender has a hook at a first end that is disposed through the eye of the staple of the hasp, and at an opposing second end the extender has an annulus, such as a hole in the extender or a loop or ring affixed to the extender. The shackle of the padlock may be disposed through the annulus and may be disposed through the eye of a second staple to secure the door or window in a closed or open position. Some embodiments employ a rigid sheath to enclose at least a portion of the extender. Typically the rigid sheath has an open state where the hook is exposed outside the sheath and a closed state where the hook is disposed within the sheath.

  6. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  7. Industrial Decision Making 

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01T23:59:59.000Z

    and industrial investment decision-making. The paper will also address several important questions: • Why has industrial investment declined? • What is the outlook for industrial investment? • How can programs engage industry for future opportunities?...

  8. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  9. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  10. Report on extending the solar program in Federal buildings

    SciTech Connect (OSTI)

    Not Available

    1980-02-01T23:59:59.000Z

    The potential benefits of extending the Solar in Federal Buildings Program are presented. Some of these are: meeting National Energy Conservation Policy Act goals, centralized management of program elements, establish central coordination of federal agency solar activities, assert federal government leadership role in promoting solar technologies, guarantee market support to solar industry, expanding federal agency solar activities, development of private and public sector solar capabilities, and enhancement of solar product development effort. (MHR)

  11. Lightweight extendable and retractable pole

    DOE Patents [OSTI]

    Warren, John L. (Santa Barbara, CA); Brandt, James E. (Santa Barbara, CA)

    1994-01-01T23:59:59.000Z

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole.

  12. Lightweight extendable and retractable pole

    DOE Patents [OSTI]

    Warren, J.L.; Brandt, J.E.

    1994-08-02T23:59:59.000Z

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole. 18 figs.

  13. Extended range chemical sensing apparatus

    DOE Patents [OSTI]

    Hughes, Robert C. (Albuquerque, NM); Schubert, W. Kent (Albuquerque, NM)

    1994-01-01T23:59:59.000Z

    An apparatus for sensing chemicals over extended range of concentrations. In particular, first and second sensors each having separate, but overlapping ranges for sensing concentrations of hydrogen are provided. Preferably, the first sensor is a MOS solid state device wherein the metal electrode or gate is a nickel alloy. The second sensor is a chemiresistor comprising a nickel alloy.

  14. Extended range chemical sensing apparatus

    DOE Patents [OSTI]

    Hughes, R.C.; Schubert, W.K.

    1994-01-18T23:59:59.000Z

    An apparatus is described for sensing chemicals over extended range of concentrations. In particular, first and second sensors each having separate, but overlapping ranges for sensing concentrations of hydrogen are provided. Preferably, the first sensor is a MOS solid state device wherein the metal electrode or gate is a nickel alloy. The second sensor is a chemiresistor comprising a nickel alloy. 6 figures.

  15. TOWARD AUTOMATED DESIGN OF INDUSTRIAL-STRENGTH ANALOG CIRCUITS

    E-Print Network [OSTI]

    Fernandez, Thomas

    Chapter 8 TOWARD AUTOMATED DESIGN OF INDUSTRIAL-STRENGTH ANALOG CIRCUITS BY MEANS OF GENETIC be extended to deliver industrial-strength automated design of analog circuits, but two countervailing factors been previously established that genetic programming can be used as an automated invention machine

  16. Extended foundations of stochastic prediction

    E-Print Network [OSTI]

    Sergey Kamenshchikov

    2014-06-28T23:59:59.000Z

    The basic purpose of this work was to suggest universal quantitative description of ergodic system intermediate bifurcation and obligatory conditions of this transition. Conditions for existence of phase state and first order phase transition were introduced in terms of energy balance for system volume unit. Extended Fokker - Plank equation with time dependent diffusion factor was formulated. It turned out that for ergodic system with fixed boundary quantized energy spectrum of phase stable states exists. Obtained results may be applied for prediction of ergodic system behavior. If isolation condition is satisfied, phase spectrum quantization allows selecting proper control parameters for system stabilization. Information about current system coarsened energy allows predicting of future stochastic system behavior on the basis of extended Fokker - Plank model.

  17. Entanglement distillation by extendible maps

    E-Print Network [OSTI]

    Lukasz Pankowski; Fernando G. S. L. Brandao; Michal Horodecki; Graeme Smith

    2013-08-25T23:59:59.000Z

    It is known that from entangled states that have positive partial transpose it is not possible to distill maximally entangled states by local operations and classical communication (LOCC). A long-standing open question is whether maximally entangled states can be distilled from every state with a non-positive partial transpose. In this paper we study a possible approach to the question consisting of enlarging the class of operations allowed. Namely, instead of LOCC operations we consider k-extendible operations, defined as maps whose Choi-Jamiolkowski state is k-extendible. We find that this class is unexpectedly powerful - e.g. it is capable of distilling EPR pairs even from product states. We also perform numerical studies of distillation of Werner states by those maps, which show that if we raise the extension index k simultaneously with the number of copies of the state, then the class of k-extendible operations is not that powerful anymore and provide a better approximation to the set of LOCC operations.

  18. Electric Utility Industry Update

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

  19. Uranium industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-04-01T23:59:59.000Z

    This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

  20. CASL Industry Council Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IndustryCouncil.shtml The new members that joined the Industry Council include NPP owneroperators with analysis capability: Tyrone Stevens of Exelon, and SMR vendors:...

  1. Industry Analysis February 2013

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    technology ­ Clean tech/ clean technology #12;7 Industry Studies · IbisWorld ­ U.S. and global industry-Industries · Biodiesel ­ Biofuel ­ Alternate fuels ­ Green fuels ­ Renewable fuels/energy ­ Green energy ­ Green Canada, Census, Industry Canada, the OECD, European Union, IMF, World Bank, UN . . . Never pay for stats

  2. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    : Occupational biomechanics, work physiology, industrial ergonomics, environmental hygiene, cognitive engineeringINDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor

  3. Pipe crawler with extendable legs

    DOE Patents [OSTI]

    Zollinger, W.T.

    1992-06-16T23:59:59.000Z

    A pipe crawler for moving through a pipe in inchworm fashion having front and rear leg assemblies separated by air cylinders to increase and decrease the spacing between assemblies. Each leg of the four legs of an assembly is moved between a wall-engaging, extended position and a retracted position by a separate air cylinder. The air cylinders of the leg assemblies are preferably arranged in pairs of oppositely directed cylinders with no pair lying in the same axial plane as another pair. Therefore, the cylinders can be as long as a leg assembly is wide and the crawler can crawl through sections of pipes where the diameter is twice that of other sections. The crawler carries a valving system, a manifold to distribute air supplied by a single umbilical air hose to the various air cylinders in a sequence controlled electrically by a controller. The crawler also utilizes a rolling mechanism, casters in this case, to reduce friction between the crawler and pipe wall thereby further extending the range of the pipe crawler. 8 figs.

  4. Pipe crawler with extendable legs

    DOE Patents [OSTI]

    Zollinger, William T. (3927 Almon Dr., Martinez, GA 30907)

    1992-01-01T23:59:59.000Z

    A pipe crawler for moving through a pipe in inchworm fashion having front and rear leg assemblies separated by air cylinders to increase and decrease the spacing between assemblies. Each leg of the four legs of an assembly is moved between a wall-engaging, extended position and a retracted position by a separate air cylinder. The air cylinders of the leg assemblies are preferably arranged in pairs of oppositely directed cylinders with no pair lying in the same axial plane as another pair. Therefore, the cylinders can be as long a leg assembly is wide and the crawler can crawl through sections of pipes where the diameter is twice that of other sections. The crawler carries a valving system, a manifold to distribute air supplied by a single umbilical air hose to the various air cylinders in a sequence controlled electrically by a controller. The crawler also utilizes a rolling mechanism, casters in this case, to reduce friction between the crawler and pipe wall thereby further extending the range of the pipe crawler.

  5. Extended inflation with induced gravity

    SciTech Connect (OSTI)

    Accetta, F. S.; Trester, J. J.

    1989-05-15T23:59:59.000Z

    We consider a recently proposed extended model of inflation which improves upon the original old inflation scenario by achieving a graceful exit from the false-vacuum phase. In this paper extended inflation is generalized to include a potential /ital V/(/phi/) for the Brans-Dicke-type field /phi/. We find that whereas a graceful exit can still be had, the inclusion of a potential places constraints on the percolation time scale for exiting the inflationary phase. Additional constraints on /ital V/(/phi/) and the false-vacuum energy density /rho//sub /ital F// from density and gravitational-wave perturbations are discussed. For initially small values of /phi/ the false vacuum undergoes power-law inflation, while for initially large values of /phi/ the expansion is exponential. Within true-vacuum regions slow-rolling inflation can occur. As a result, this model generically leads to multiple episodes of inflation. We discuss the significance these multiple episodes of inflation may have on the formation of large-scale structure and the production of voids.

  6. EXTENDED FORMULATIONS FOR PACKING AND PARTITIONING ...

    E-Print Network [OSTI]

    2008-06-02T23:59:59.000Z

    The topic of this paper are extended formulations for these orbitopes, i.e., (sim- ple) linear descriptions of ... Extending over pages 18 to. 27, it hardly leaves (not

  7. Cash Flow Impacts of Industrial Steam Efficiency

    E-Print Network [OSTI]

    Russell, C.

    of thermal transfer tasks within the majority of manufacturing industries, it is widely perceived as a "support" utility. In other words, steam is considered a power source subordinate to process lines that are the real focus of manufacturing activity... be directed to productive functions, enabling the plant to extend production runs or perhaps even begin new product lines. RETURN ON INVESTMENT Global competition and decentralized corporate structures provide formidable challenges for manufacturing...

  8. The Industrial Electrification Program

    E-Print Network [OSTI]

    Harry, I. L.

    1982-01-01T23:59:59.000Z

    EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

  9. Electrotechnologies in Process Industries

    E-Print Network [OSTI]

    Amarnath, K. R.

    The Industrial Program at the Electric Power Research Institute (EPRI) promotes the efficient use of electricity to improve the competitive position of the American industry. Electrotechnologies that improve productivity, improve quality...

  10. and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    technologicalandlogisticssystemsbygathering, structuring, and managing information. Indus- trial engineers apply their knowledge not only45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle

  11. Demographics and industry returns

    E-Print Network [OSTI]

    Pollet, Joshua A.; DellaVigna, Stefano

    2007-01-01T23:59:59.000Z

    Industry category Child care Children’s books Children’s clothing Toysindustry Child care Children’s books Children’s clothing ToysIndustries are associated with high demand by children (child care, toys) and

  12. INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY

    E-Print Network [OSTI]

    Pohl, Karsten

    INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

  13. Industry Analysis October 2010

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    Different regulations for some industries in Canada, the U.S. and Europe ie. telecommunications, energy of energy, materials, industrial waste, byproducts #12;Contact Constance Adamson Stauffer Library adamsonc

  14. Geothermal Industry Partnership Opportunities

    Broader source: Energy.gov [DOE]

    Here you'll find links to information about partnership opportunities and programs for the geothermal industry.

  15. World Oil Prices in AEO2007 (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01T23:59:59.000Z

    Over the long term, the Annual Energy Outlook 2007 (AEO) projection for world oil prices -- defined as the average price of imported low-sulfur, light crude oil to U.S. refiners -- is similar to the AEO2006 projection. In the near term, however, AEO2007 projects prices that are $8 to $10 higher than those in AEO2006.

  16. Pair extended coupled cluster doubles

    E-Print Network [OSTI]

    Henderson, Thomas M; Scuseria, Gustavo E

    2015-01-01T23:59:59.000Z

    The accurate and efficient description of strongly correlated systems remains an important challenge for computational methods. Doubly occupied configuration interaction (DOCI), in which all electrons are paired and no correlations which break these pairs are permitted, can in many cases provide an accurate account of strong correlations, albeit at combinatorial computational cost. Recently, there has been significant interest in a method we refer to as pair coupled cluster doubles (pCCD), a variant of coupled cluster doubles in which the electrons are paired. This is simply because pCCD provides energies nearly identical to those of DOCI, but at mean-field computational cost (disregarding the cost of the two-electron integral transformation). Here, we introduce the more complete pair extended coupled cluster doubles (pECCD) approach which, like pCCD, has mean-field cost and reproduces DOCI energetically. We show that unlike pCCD, pECCD also reproduces the DOCI wave function with high accuracy. Moreoever, pEC...

  17. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

  18. Industrial Dojo Program Fosters Industrial Internet Development...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE Launches Cloud Foundry 'Industrial Dojo,' Contributes to Open Source to Foster Continued...

  19. Industrial policy and the Indian electronics industry

    E-Print Network [OSTI]

    Love, Robert (Robert Eric)

    2008-01-01T23:59:59.000Z

    Recently, production within India's Electronics sector amounted to a low $12 billion when compared to the global output of $1400 billion. The slow growth in the local industry is often judged to be the result of late ...

  20. LANSCE | Lujan Center | Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Users The Lujan Neutron Scattering Center offers a diverse set of capabilities and instruments for industrial projects. Industrial users are invited to contact Fredrik...

  1. Uranium industry annual 1998

    SciTech Connect (OSTI)

    NONE

    1999-04-22T23:59:59.000Z

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

  2. Uranium industry annual 1994

    SciTech Connect (OSTI)

    NONE

    1995-07-05T23:59:59.000Z

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

  3. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  4. Optimization Online - Extending Algebraic Modelling Languages for ...

    E-Print Network [OSTI]

    Christian Valente

    2006-12-27T23:59:59.000Z

    Dec 27, 2006 ... Extending Algebraic Modelling Languages for Stochastic Programming. Christian Valente(Christian.Valente ***at*** brunel.ac.uk) Gautam ...

  5. Extending the Operating Lives of Materials

    ScienceCinema (OSTI)

    Paul Jablonski

    2010-09-01T23:59:59.000Z

    Metallurgist Paul Jablonski discusses his role in developing processes that extend the operating temperatures and operating lives of materials used in energy applications.

  6. Extending the Operating Lives of Materials

    SciTech Connect (OSTI)

    Paul Jablonski

    2010-01-26T23:59:59.000Z

    Metallurgist Paul Jablonski discusses his role in developing processes that extend the operating temperatures and operating lives of materials used in energy applications.

  7. Sandia National Laboratories: extend the complete combustion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    extend the complete combustion zone Sandia Maps Multiple Paths to Cleaner, Low-Temp Diesels On October 22, 2013, in CRF, Energy, Facilities, News, News & Events, Partnership,...

  8. Industrial Retrofits are Possible

    E-Print Network [OSTI]

    Stobart, E. W.

    . In April of 1987, the provincial government initiated a program to assist industrial energy users to reduce their energy usage. This program was designed to concentrate on an in-depth analysis of the complete operations of industrial plants... with the analyses being performed by specialist, private sector, engineering consultants. The program is in 3 phases providing an Ontario industrial plant with an Energy Analysis, a Feasibility Analysis Grant and a Project Engineering Design Grant...

  9. Presentations for Industry

    Broader source: Energy.gov [DOE]

    Learn energy-saving strategies from leading manufacturing companies and energy experts. The presentations are organized below by topic area. In addition, industrial energy managers, utilities, and...

  10. About Industrial Distributed Energy

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office's (AMO's) Industrial Distributed Energy activities build on the success of predecessor DOE programs on distributed energy and combined heat and power (CHP) while...

  11. Industrial Demand Module

    Gasoline and Diesel Fuel Update (EIA)

    Boiler, Steam, and Cogeneration (BSC) Component. The BSC Component satisfies the steam demand from the PA and BLD Components. In some industries, the PA Component produces...

  12. Extended Kalman filtering applied to a two-axis robotic arm with flexible links

    SciTech Connect (OSTI)

    Lertpiriyasuwat, V.; Berg, M.C.; Buffinton, K.W.

    2000-03-01T23:59:59.000Z

    An industrial robot today uses measurements of its joint positions and models of its kinematics and dynamics to estimate and control its end-effector position. Substantially better end-effector position estimation and control performance would be obtainable if direct measurements of its end-effector position were also used. The subject of this paper is extended Kalman filtering for precise estimation of the position of the end-effector of a robot using, in addition to the usual measurements of the joint positions, direct measurements of the end-effector position. The estimation performances of extended Kalman filters are compared in applications to a planar two-axis robotic arm with very flexible links. The comparisons shed new light on the dependence of extended Kalman filter estimation performance on the quality of the model of the arm dynamics that the extended Kalman filter operates with.

  13. Growing Hawaii's agriculture industry,

    E-Print Network [OSTI]

    Program Overview Growing Hawaii's agriculture industry, one business at a time Website: http-3547 agincubator@ctahr.hawaii.edu Grow Your Business If you are looking to start an agriculture-related business with our program · Positively impact the agriculture industry in Hawaii with their success

  14. Geothermal industry assessment

    SciTech Connect (OSTI)

    Not Available

    1980-07-01T23:59:59.000Z

    An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

  15. Industrial Optimization Compact Course

    E-Print Network [OSTI]

    Kirches, Christian

    Industrial Optimization Compact Course and Challenge Workshop Optimization plays a crucial role of the processes are typically nonlinear and dyna- mic. Thus, complex dynamic optimization or optimal control in industrial optimization. February 17­20, 2014 ·9.00­17.00 IWR ·Im Neuenheimer Feld 368 ·69120 Heidelberg www

  16. Uranium industry annual 1996

    SciTech Connect (OSTI)

    NONE

    1997-04-01T23:59:59.000Z

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  17. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

  18. Industrialization and manufacturing steps within the Global Product Lifecycle context

    E-Print Network [OSTI]

    Boyer, Edmond

    steps within the Product Life cycle Management (PLM) context. Initially, PLM was focused almost. In the same time, the industrialization and the manufacturing are not sufficiently integrated into the PLM solutions. Actually, there is much to be gained by extending the coverage of PLM to production stage

  19. Industrialization and manufacturing steps within the Global Product Lifecycle context

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    steps within the Product Life cycle Management (PLM) context. Initially, PLM was focused almost. In the same time, the industrialization and the production are not sufficiently integrated into the PLM solutions. Currently, there is much to be gained by extending the coverage of PLM to production step

  20. Uranium industry annual 1995

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

  1. Apparatus and methods for a human extender

    DOE Patents [OSTI]

    Jansen, John F. (Knoxville, TN)

    2001-01-01T23:59:59.000Z

    A human extender controller for interface between a human operator and a physical object through a physical plant. The human extender controller uses an inner-feedback loop to increase the equivalent damping of the operating system to stabilize the system when it contacts with the environment and reduces the impact of the environment variation by utilizing a high feedback gain, determined by a root locus sketch. Because the stability of the human extender controller of the present invention is greatly enhanced over that of the prior art, the present invention is able to achieve a force reflection ratio 500 to 1 and capable of handling loads above the two (2) ton range.

  2. Extended core for motor/generator

    DOE Patents [OSTI]

    Shoykhet, Boris A.

    2005-05-10T23:59:59.000Z

    An extended stator core in a motor/generator can be utilized to mitigate losses in end regions of the core and a frame of the motor/generator. To mitigate the losses, the stator core can be extended to a length substantially equivalent to or greater than a length of a magnetically active portion in the rotor. Alternatively, a conventional length stator core can be utilized with a shortened magnetically active portion to mitigate losses in the motor/generator. To mitigate the losses in the core caused by stator winding, the core can be extended to a length substantially equivalent or greater than a length of stator winding.

  3. Extended core for motor/generator

    DOE Patents [OSTI]

    Shoykhet, Boris A.

    2006-08-22T23:59:59.000Z

    An extended stator core in a motor/generator can be utilized to mitigate losses in end regions of the core and a frame of the motor/generator. To mitigate the losses, the stator core can be extended to a length substantially equivalent to or greater than a length of a magnetically active portion in the rotor. Alternatively, a conventional length stator core can be utilized with a shortened magnetically active portion to mitigate losses in the motor/generator. To mitigate the losses in the core caused by stator winding, the core can be extended to a length substantially equivalent or greater than a length of stator winding.

  4. Extended emission associated with young HII regions

    E-Print Network [OSTI]

    S. P. Ellingsen; S. S. Shabala; S. E. Kurtz

    2004-12-06T23:59:59.000Z

    We have used the Australia Telescope Compact Array (ATCA) to make observations of a sample of eight young ultra-compact HII regions, selected on the basis that they have associated class II methanol maser emission. We have made observations sensitive to both compact and extended structures and find both to be present in most sources. The scale of the extended emission in our sample is in general less than that observed towards samples based on IRAS properties, or large single-dish flux densities. Our observations are consistent with a scenario where extended and compact radio continuum emission coexists within HII regions for a significant period of time. We suggest that these observations are consistent with a model where HII evolution takes place within hierarchically structured molecular clouds. This model is the subject of a companion paper (Shabala et al. 2005) and addresses both the association between compact and extended emission and UCHII region lifetime problem.

  5. Extending dependencies for improving data quality 

    E-Print Network [OSTI]

    Ma, Shuai

    2011-06-30T23:59:59.000Z

    This doctoral thesis presents the results of my work on extending dependencies for improving data quality, both in a centralized environment with a single database and in a data exchange and integration environment with ...

  6. PALC: Extending ALC ABoxes with Probabilities

    E-Print Network [OSTI]

    Jäger, Gerhard

    on description logics can be found in [BCM+ 03] and [BKW03]. For many applications it is important to extend on probabilities on terminological axioms, see for example [BKW03, Hei94, KLP97]. Notable exceptions are [Jae94, GL

  7. ELSEVIER International Journal of Industrial Ergonomics 17 (1996) 285-290 Ir~ernattonatlournalc~

    E-Print Network [OSTI]

    Radwin, Robert G.

    1996-01-01T23:59:59.000Z

    ELSEVIER International Journal of Industrial Ergonomics 17 (1996) 285-290 Ir~ernattonatlournalc~ Industrial Ergonomics Short communication A new method for extending the range of conductive polymer sensors measurement instruments are important for providing ergonomics practitioners with a quantitative means

  8. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

    1998-06-09T23:59:59.000Z

    A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

  9. Industrial Decision Making

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01T23:59:59.000Z

    Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy...

  10. AI Industrial Engineering 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    This paper describes the California Energy Commission’s (Commission) energy policies and programs that save energy and money for California’s manufacturing and food processing industries to help retain businesses in-state and reduce greenhouse gases...

  11. Uranium Industry Annual, 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-28T23:59:59.000Z

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

  12. Industrial energy use indices 

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10T23:59:59.000Z

    Energy use index (EUI) is an important measure of energy use which normalizes energy use by dividing by building area. Energy use indices and associated coefficients of variation are computed for major industry categories ...

  13. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Plant managers around the world are interested in improving the energy efficiency of their facilities while both growing and modernizing their manufacturing capabilities. Emerging industrial technologies, both at the ...

  14. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Industrial steam users recognize the need to reduce system cost in order to remain internationally competitive. Steam systems are a key utility that influence cost significantly, and represent a high value opportunity ...

  15. Utility and Industrial Partnerships

    E-Print Network [OSTI]

    Sashihara, T. F.

    In the past decade, many external forces have shocked both utilities and their large industrial customers into seeking more effective ways of coping and surviving. One such way is to develop mutually beneficial partnerships optimizing the use...

  16. Engineering Industrial & Systems

    E-Print Network [OSTI]

    Berdichevsky, Victor

    powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I the skills necessary to be successful in today's global environment. EDGE exposes and trains engineering

  17. Clean Energy Manufacturing Initiative Industrial Efficiency and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

  18. NEMS industrial module documentation report

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  19. Industrial Development Fund (North Carolina)

    Broader source: Energy.gov [DOE]

    The Industrial Development Fund provides financing grants and loans through designated municipalities and counties to assist in infrastructure improvements for targeted industrial projects. The...

  20. Using System Dynamics to Extend Real Options Use: Insights from the Oil & Gas Industry

    E-Print Network [OSTI]

    Ford, David N.

    to real options through work with a major energy firm to apply real options. Five key challenges facing & Production Technology Group, BP. 3111 Winding Shore Lane, Katy TX 77450. E-mail address: JohnsoST@bp.com 2, Texas A&M University, College Station, TX 77843-3136. E-mail address: xftu@tamu.edu 3 Assistant

  1. Industrial Energy Efficiency: Designing Effective State Programs...

    Energy Savers [EERE]

    Industrial Energy Efficiency: Designing Effective State Programs for the Industrial Sector Industrial Energy Efficiency: Designing Effective State Programs for the Industrial...

  2. Extended emission around GPS radio sources

    E-Print Network [OSTI]

    C. Stanghellini; C. P. O'Dea; D. Dallacasa; P. Cassaro; S. A. Baum; R. Fanti; C. Fanti

    2005-07-21T23:59:59.000Z

    Extended radio emission detected around a sample of GHz Peaked Spectrum (GPS) radio sources is discussed. Evidence for extended emission which is related to the GPS source is found in 6 objects out of 33. Three objects are associated with quasars with core-jet pc-scale morphology, and three are identified with galaxies with symmetric (CSO) radio morphology. We conclude that the core-jet GPS quasars are likely to be beamed objects with a continuous supply of energy from the core to the kpc scale. It is also possible that low surface brightness extended radio emission is present in other GPS quasars but the emission is below our detection limit due to the high redshifts of the objects. On the other hand, the CSO/galaxies with extended large scale emission may be rejuvenated sources where the extended emission is the relic of previous activity. In general, the presence of large scale emission associated with GPS galaxies is uncommon, suggesting that in the context of the recurrent activity model, the time scale between subsequent bursts is in general longer than the radiative lifetime of the radio emission from the earlier activity.

  3. Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst

    E-Print Network [OSTI]

    Mountziaris, T. J.

    9/13/2007 Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst Department of Mechanical and Industrial Engineering About the Mechanical and Industrial Engineering Industry Advisory Board The purpose of the Mechanical and Industrial Engineering Industry Advisory

  4. Extended Hamiltonian systems in multisymplectic field theories

    SciTech Connect (OSTI)

    Echeverria-Enriquez, Arturo; Leon, Manuel de; Munoz-Lecanda, Miguel C.; Roman-Roy, Narciso [Departamento de Matematica Aplicada IV, Campus Norte UPC, Edificio C-3, C/Jordi Girona 1, E-08034 Barcelona (Spain); Instituto de Matematicas y Fisica Fundamental, CSIC, C/Serrano 123, E-28006 Madrid (Spain); Departamento de Matematica Aplicada IV, Campus Norte UPC, Edificio C-3, C/Jordi Girona 1, E-08034 Barcelona (Spain)

    2007-11-15T23:59:59.000Z

    We consider Hamiltonian systems in first-order multisymplectic field theories. We review the properties of Hamiltonian systems in the so-called restricted multimomentum bundle, including the variational principle which leads to the Hamiltonian field equations. In an analogous way to how these systems are defined in the so-called extended (symplectic) formulation of nonautonomous mechanics, we introduce Hamiltonian systems in the extended multimomentum bundle. The geometric properties of these systems are studied, the Hamiltonian equations are analyzed using integrable multivector fields, the corresponding variational principle is also stated, and the relation between the extended and the restricted Hamiltonian systems is established. All these properties are also adapted to certain kinds of submanifolds of the multimomentum bundles in order to cover the case of almost-regular field theories.

  5. Extended Chaos Theory and Multiparticle Production

    E-Print Network [OSTI]

    Yi-Fang Chang

    2008-08-02T23:59:59.000Z

    First, using the method of the soliton-solution, the fermion probability density equation, which corresponds to the Dirac equation, is derived. Next, we extend the chaos theory, in which the period bifurcation is equivalent to the particle production. Then this extended chaos theory can be used for description of the multiparticle production and the extensive air showers at high energy. Let the parameter takes a suitable value, the quantitative results will be obtained, and an approximate formula will be derived. Many properties of the multiparticle production and of the chaos theory are universal.

  6. Policies on Japan's Space Industry

    E-Print Network [OSTI]

    with space emerging countries 3. Step up leading-edge science and technology as an innovation engine (1Policies on Japan's Space Industry Shuichi Kaneko Director, Space Industry Office Manufacturing Industries Bureau Ministry of Economy, Trade and Industry (METI) #12;Japan's Space Policy is based

  7. Proceedings of Student/Faculty Research Day, CSIS, Pace University, May 4th Extending the Life of Legacy Software Systems

    E-Print Network [OSTI]

    Tappert, Charles

    as the application of scientific knowledge, especially in industry and business. Ray Kurzweil [5] presented which must be considered when extending the life of a legacy system in light of the Technology Life Obsolescence Surplus Retire Support Antiquity Table 2. Comparison of Technology Life Cycle Models The models

  8. Industrial Assessment Center

    SciTech Connect (OSTI)

    Dr. Diane Schaub

    2007-03-05T23:59:59.000Z

    Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

  9. Libyan oil industry

    SciTech Connect (OSTI)

    Waddams, F.C.

    1980-01-01T23:59:59.000Z

    Three aspects of the growth and progress of Libya's oil industry since the first crude oil discovery in 1961 are: (1) relations between the Libyan government and the concessionary oil companies; (2) the impact of Libyan oil and events in Libya on the petroleum markets of Europe and the world; and (3) the response of the Libyan economy to the development of its oil industry. The historical review begins with Libya's becoming a sovereign nation in 1951 and traces its subsequent development into a position as a leading world oil producer. 54 references, 10 figures, 55 tables.

  10. Solar industrial process heat

    SciTech Connect (OSTI)

    Lumsdaine, E.

    1981-04-01T23:59:59.000Z

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  11. Industrial Equipment Impacts Infrastructure

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf05 IdentifiedPathways to SustainedIndustrial AssessmentIndustrial

  12. EXTENDED PARKING REQUEST COLORADO SCHOOL OF MINES

    E-Print Network [OSTI]

    for an extended period of time. Vehicle registration and a valid CSM parking permit must be current and visible: __________________________ Your Permit #: ______________________________ License Plate Number and State of Issue be current and valid thru the expected date of return indicated below * In consideration for being permitted

  13. Extending Amdahl's Law for Energy-Efficient

    E-Print Network [OSTI]

    Lee, Hsien-Hsin "Sean"

    Extending Amdahl's Law for Energy-Efficient Computing in the Many-Core Era Dong Hyuk Woo and Hsien design constraints to analyze many-core design alternatives. The revised models provide computer architects with a better understanding of many- core design types, enabling them to make more informed

  14. EXTENDING GEOSPATIAL REPOSITORIES WITH GEOSEMANTIC PROXIMITY FUNCTIONALITIES

    E-Print Network [OSTI]

    EXTENDING GEOSPATIAL REPOSITORIES WITH GEOSEMANTIC PROXIMITY FUNCTIONALITIES TO FACILITATE THE INTEROPERABILITY OF GEOSPATIAL DATA Jean Brodeur a, b , Yvan Bédard a a Centre for Research in Geomatics, Laval.Bedard@scg.ulaval.ca Commission IV, WG IV/1 KEY WORDS: Geospatial data interoperability, Geospatial repository, Geosemantic

  15. Extending additivity from symmetric to asymmetric channels

    E-Print Network [OSTI]

    Motohisa Fukuda

    2005-08-14T23:59:59.000Z

    We prove a lemma which allows one to extend results about the additivity of the minimal output entropy from highly symmetric channels to a much larger class. A similar result holds for the maximal output $p$-norm. Examples are given showing its use in a variety of situations. In particular, we prove the additivity and the multiplicativity for the shifted depolarising channel.

  16. SF STATE Extended Learning PROFESSIONAL DEVELOPMENT PROGRAM

    E-Print Network [OSTI]

    . See www.pmi.org for credential requirements. The current first time pass rate of our students for the PMP Exam is 89%. PMBOK is a registered mark of the Project Management Institute, Inc. The PMI SF State Extended Learning is approved by the Project Management Institute (PMI)® as a Registered

  17. Extending the Upper Temperature Limit for Life

    E-Print Network [OSTI]

    Lovley, Derek

    ) un- der N2-CO2 (80:20) in sealed culture tubes that con- tained formate (10 mM) as the electron donor that permit strain 121 to grow at such high temperatures are unknown. It is gen- erally assumed that the upperExtending the Upper Temperature Limit for Life Kazem Kashefi and Derek R. Lovley* The upper

  18. Jitter Regulation for Multiple Streams (Extended Abstract)

    E-Print Network [OSTI]

    Hay, David

    Jitter Regulation for Multiple Streams (Extended Abstract) David Hay and Gabriel Scalosub Computer as possible; the smoothness of a traffic is typically captured by its delay jitter, i.e., the difference between the maximal and minimal end-to-end delays. The task of minimizing the jitter is done by jitter

  19. Column Generation for Extended Formulations - Optimization Online

    E-Print Network [OSTI]

    2011-07-08T23:59:59.000Z

    Jul 8, 2011 ... reformulation in order to define a good quality outer approximation of the .... extends to the case where one only has a good reformulation in an ..... by inspection. ..... the formulation is kept under control by way of managing its variables .... ming solution as a hyper-path (associated to a unit flow incoming to

  20. EXTENDED DESCRIPTION TECHNIQUES FOR SECURITY ENGINEERING

    E-Print Network [OSTI]

    of security critical systems. Based on general security evaluation criteria, we show how to extend the system applications that communi- cate over open networks like the Internet--security is an extremely important issue this problem, on the one hand there are highly sophisticated col- lections of evaluation criteria that security

  1. Ontario's Industrial Energy Services Program

    E-Print Network [OSTI]

    Ploeger, L. K.

    .8%! ! ! ! OTHER 8.4%! l4.9%! l4.0%! ! ! ! TOTAL 100.0%! 100.0%! 100.0%! ! PROGRAM STRATEGY Ontario's Industrial Energy Services Program was designed to: lead industrial energy consumers to the realization that increased energy efficiency generates... ONTARIO'S INDUSTRIAL ENERGY SERVICES PROGRAM LINDA K. PLOEGER, GENERAL MANAGER, INDUSTRY PROGRAMS ONTARIO MINISTRY OF ENERGY TORONTO, ONTARIO, ABSTRACT The Ontario Ministry of Energy began offering its new Industrial Energy Services Program...

  2. Industry Partners Panel

    Broader source: Energy.gov [DOE]

    Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

  3. Industrial Energy Use Indices

    E-Print Network [OSTI]

    Hanegan, A.; Heffington, W. M.

    2007-01-01T23:59:59.000Z

    of variations for all industry types in warm versus cold regions of the U.S. generally is greater than unity. Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used...

  4. INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER

    SciTech Connect (OSTI)

    MELINDA KRAHENBUHL

    2010-05-28T23:59:59.000Z

    The U. S. Department of Energy’s Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

  5. Extended-burnup LWR (light-water reactor) fuel: The amount, characteristics, and potential effects on interim storage

    SciTech Connect (OSTI)

    Bailey, W.J.

    1989-03-01T23:59:59.000Z

    The results of a study on extended-burnup, light-water reactor (LWR) spent fuel are described in this report. The study was performed by Pacific Northwest Laboratory for the US Department of Energy (DOE). The purpose of the study was to collect and evaluate information on the status of in-reactor performance and integrity of extended-burnup LWR fuel and initiate the investigation of the effects of extending fuel burnup on the subsequent handling, interim storage, and other operations (e.g., rod consolidation and shipping) associated with the back end of the fuel cycle. The results of this study will aid DOE and the nuclear industry in assessing the effects on waste management of extending the useful in-reactor life of nuclear fuel. The experience base with extended-burnup fuel is now substantial and projections for future use of extended-burnup fuel in domestic LWRs are positive. The basic performance and integrity of the fuel in the reactor has not been compromised by extending the burnup, and the potential limitations for further extending the burnup are not severe. 104 refs., 15 tabs.

  6. Transforming the Oil Industry into the Energy Industry

    E-Print Network [OSTI]

    Sperling, Daniel; Yeh, Sonia

    2009-01-01T23:59:59.000Z

    Transforming the Oil Industry into the Energy Industry BYculprit. It consumes half the oil used in the world andconsuming two thirds of the oil and causing about one third

  7. Innovative New Industrial Technologies: An Industry/DOE Joint Endeavor

    E-Print Network [OSTI]

    Gross, T. J.

    The Department of Energy’s Office of Industrial Programs supports research and development leading to improved energy efficiency and greater overall productivity in the industrial sector. Its basic strategy is a program of cost-shared R...

  8. INDUSTRIAL ASSOCIATESHIP SCHEME Centre for Industrial Consultancy and Sponsored Research

    E-Print Network [OSTI]

    Bhashyam, Srikrishna

    this scheme: #12;(i) Energy Energy Storage (1990) Strategies for Energy Saving in Industry (1993) Pollution Control Equipment (2001) Acoustics and Noise Control for Industry (2005) Urban Air Quality

  9. On energy conservation in extended magnetohydrodynamics

    E-Print Network [OSTI]

    Kimura, Keiji

    2014-01-01T23:59:59.000Z

    A systematic study of energy conservation for extended magnetohydrodynamic (MHD) models that include Hall terms and electron inertia is performed. It is observed that commonly used models do not conserve energy in the ideal limit, i.e., when viscosity and resistivity are neglected. In particular, a term in the momentum equation that is often neglected is seen to be needed for conservation of energy.

  10. Fusion Rules for Extended Current Algebras

    E-Print Network [OSTI]

    Ernest Baver; Doron Gepner

    1996-01-30T23:59:59.000Z

    The initial classification of fusion rules have shown that rational conformal field theory is very limited. In this paper we study the fusion rules of extend ed current algebras. Explicit formulas are given for the S matrix and the fusion rules, based on the full splitting of the fixed point fields. We find that in s ome cases sensible fusion rules are obtained, while in others this procedure lea ds to fractional fusion constants.

  11. Impacts of the extended-weight coal haul road system. Final research report, December 1995

    SciTech Connect (OSTI)

    Pigman, J.; Crabtree, J.; Agent, K.; Graves, C.; Deacon, J.

    1995-12-01T23:59:59.000Z

    The Extended-Weight Coal Haul Road System, created by the Kentucky Legislature in 1986, consists of all roads which carry over 50,000 tons of coal in a calendar year. Trucks hauling coal on this system are authorized to exceed normal weight limits through the payment of an annual decal fee. A research study was initiated in July of 1992 to analyze the impacts of the extended-weight system. Analyses in this report are based on the following: historical data on coal production and transportation: data from coal decal applications; interviews of legislators, transportation officials, coal company representatives, and coal trucking representatives; newspaper articles; vehicle classification data; analyses of pavement costs; pavement rideability data; and accident data. Primary conclusions include; (1) The extended-weight system has apparently been somewhat successful in accomplishing the objective of enhancing the competitiveness and economic viability of the Kentucky coal industry; (2) Overall accident rates did not increase as a result of implementation of the extended-weight system, but the fatal accident injury rates were significantly higher on the extended-weight system and for trucks operating with the coal decal; (3) Advance-warning flashers have been evaluated and recommended as a means of reducing intersection accidents involving heavy/coal trucks; (4) The coal-decal fee structure results in a net annual loss in Road Fund revenue of approximately $2 million; (5) Forty percent of revenue from decal fees are allocated to counties even though county-maintained roads comprise only eight percent of the extended-weight system; (6) Heavier weights of coal-decal trucks add approximately $9 million annually to the pavement overlay costs; (7) Road users throughout the state are subsidizing the movement of Kentucky coal by participating in the cost of maintaining and improving the highway system; and (8) Possibly reflecting the increased funding of extended-weight roads.

  12. INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles of physical and human resources. These engineers are involved in developing manufacturing systems to help companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited

  13. Coal industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  14. Coal industry annual 1993

    SciTech Connect (OSTI)

    Not Available

    1994-12-06T23:59:59.000Z

    Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

  15. BTU Accounting for Industry

    E-Print Network [OSTI]

    Redd, R. O.

    1979-01-01T23:59:59.000Z

    , salesmen cars, over the highway trucks, facilities startup, waste used as fuel and fuels received for storage. This is a first step in the DOE's effort to establish usage guidelines for large industrial users and, we note, it requires BTU usage data...-generated electricity, heating, ventilating, air conditioning, in-plant transportation, ore hauling, raw material storage and finished product warehousing. Categories which are excluded are corporate and divisional offices, basic research, distribution centers...

  16. Industrial Waste Heat Recovery

    E-Print Network [OSTI]

    Ward, M. E.; Solomon, N. G.; Tabb, E. S.

    1980-01-01T23:59:59.000Z

    INDUSTRIAL WASTE HEAT RECOVREY M. E. Ward and N. G. Solomon E. S. Tabb Solar Turbines International and Gas Research Institute San Diego, California Chicago, Illinois ABSTRACT i I One hundred fifty reports were reviewed along with interviews... tests, promising low temperature heat exchanger tube alloys and coated surfaces were identified. 1INTROUCTION of advanced technology heat recovery techniques 1_ Recovering waste heat from the flue gases of the pr~ary objective. Specific objectives...

  17. Industrial Energy Efficiency Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to Industrial

  18. The impact of government policies on industrial evolution : the case of China's automotive industry

    E-Print Network [OSTI]

    Luo, Jianxi

    2006-01-01T23:59:59.000Z

    Governmental industrial policies have great influence on industrial performances and development trajectories. The infant industry theory has been the dominating theoretical foundation of the industrial policies in developing ...

  19. Industrial Heat Pump Design Options

    E-Print Network [OSTI]

    Gilbert, J. S.

    There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

  20. Industrial Heat Pump Design Options 

    E-Print Network [OSTI]

    Gilbert, J. S.

    1985-01-01T23:59:59.000Z

    There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

  1. A National Resource for Industry

    E-Print Network [OSTI]

    alloys, and metal matrix composite products carbon fibe's manufacturing industries. These industries call upon ORNL's expertise in materials synthesis, characterization-efficient manufacturing processes and materials targeting products of the future. The Department of Energy's first

  2. Electrotechnologies and Industrial Pollution Control

    E-Print Network [OSTI]

    Schmidt, P. S.

    The role of electrotechnologies in the control of emissions and effluents from industrial processes is discussed. Matrices are presented identifying those electrotechnologies which impact pollution in various industries. Specific examples...

  3. Deaerators in Industrial Steam Systems

    SciTech Connect (OSTI)

    Not Available

    2006-01-01T23:59:59.000Z

    This revised ITP tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  4. Modeling the semiconductor industry dynamics

    E-Print Network [OSTI]

    Wu, Kailiang

    2008-01-01T23:59:59.000Z

    The semiconductor industry is an exciting and challenging industry. Strong demand at the application end, plus the high capital intensity and rapid technological innovation in manufacturing, makes it difficult to manage ...

  5. Texas Industries of the Future

    E-Print Network [OSTI]

    Ferland, K.

    The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs...

  6. Fracking: An Industry Under Pressure

    E-Print Network [OSTI]

    Melville, Jo

    2013-01-01T23:59:59.000Z

    is able to squeeze out of oil and gas wells, it is a hugehugely to the local oil and gas industries, household incomeMore importantly, the oil and gas industry -- mostly through

  7. Innovative Utility Pricing for Industry

    E-Print Network [OSTI]

    Ross, J. A.

    tariffs can re a market for power during the time when it has sult in benefits to industry, to the electric abundant capacity available. From the other rate utility, and to other ratepayers on the electric payers' perspective, there will be a continued...INNOVATIVE UTILITY PRICING FOR INDUSTRY James A. Ross Drazen-Brubaker &Associates, Inc. St. Louis, Missouri ABSTRACT The electric utility industry represents only one source of power available to industry. Al though the monopolistic...

  8. Praxair extending hydrogen pipeline in Southeast Texas

    SciTech Connect (OSTI)

    Not Available

    1992-08-24T23:59:59.000Z

    This paper reports that Praxair Inc., an independent corporation created by the spinoff of Union Carbide Corp.'s Linde division, is extending its high purity hydrogen pipeline system from Channelview, Tex., to Port Arthur, Tex. The 70 mile, 10 in. extension begins at a new pressure swing adsorption (PSA) purification unit next to Lyondell Petrochemical Co.'s Channelview plant. The PSA unit will upgrade hydrogen offgas from Lyondell's methanol plant to 99.99% purity hydrogen. The new line, advancing at a rate of about 1 mile/day, will reach its first customer, Star Enterprise's 250,000 b/d Port Arthur refinery, in September.

  9. Extend the Operating Life of Your Motor

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport in Representative Geologic Media | DepartmentEnergy ExploringPond1988) |Extend

  10. Industrial Energy Audit Guidebook: Guidelines for Conducting...

    Open Energy Info (EERE)

    Industry Resource Type: Guidemanual Website: china.lbl.govsiteschina.lbl.govfilesLBNL-3991E.Industrial%20Energy Industrial Energy Audit Guidebook: Guidelines for Conducting...

  11. Local Option- Industrial Facilities and Development Bonds

    Broader source: Energy.gov [DOE]

    Under the Utah Industrial Facilities and Development Act, counties, municipalities, and state universities in Utah may issue Industrial Revenue Bonds (IRBs) or Industrial Development Bonds (IDBs)...

  12. Federal Utility Partnership Working Group Industry Commitment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Commitment Federal Utility Partnership Working Group Industry Commitment Investor-owned electric utility industry members of the Edison Electric Institute pledge to assist...

  13. Coal Industry Annual 1995

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

  14. Industrial Cogeneration Application

    E-Print Network [OSTI]

    Mozzo, M. A.

    INDUSTRIAL COGENERATION APLLICATION Martin A. Mozzo, Jr., P.E. American Standard, Inc. New York,New York ABSTRACT Cogeneration is the sequential use of a single fuel source to generate electrical and thermal energy. It is not a new technology... been reviewing the potential of cogeneration at some of our key facilities. Our plan is to begin with a Pilot Plant 500 KW steam turbine generator to be install~d and operating in 1986. Key points to be discuss~d in the paper are: 1...

  15. Coal industry annual 1996

    SciTech Connect (OSTI)

    NONE

    1997-11-01T23:59:59.000Z

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

  16. Industrial energy use indices

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10T23:59:59.000Z

    and colder are determined by annual average temperature weather data). Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used in the south of the U.S. iv... the average EUI for an energy type. The combined CoV from all of the industries considered, which accounts for 8,200 plants from all areas of the continental U.S., is 290%. This paper discusses EUIs and their variations based on electricity and natural...

  17. Natural Gas Industrial Price

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14 Dec-14 Jan-15LiquidBG 0 20Year Jan Feb2009 20103 5.53

  18. Industrial Green | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook link to04948Industrial Green

  19. CASL - Industry Council

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteandscience, and8 FY0Link to Resources Industry

  20. CASL - Industry Council Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteandscience, and8 FY0Link to Resources IndustryCASL

  1. Industrial Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to Industrial Energy

  2. Industrial Energy Efficiency Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to IndustrialEnergy

  3. Extended Supersymmetry in Gapped and Superconducting Graphene

    E-Print Network [OSTI]

    V. K. Oikonomou

    2015-06-27T23:59:59.000Z

    In view of the many quantum field theoretical descriptions of graphene in $2+1$ dimensions, we present another field theoretical feature of graphene, in the presence of defects. Particularly, we shall be interested in gapped graphene in the presence of a domain wall and also for superconducting graphene in the presence of a vortex. As we explicitly demonstrate, the gapped graphene electrons that are localized on the domain wall are associated with four $N=2$ one dimensional supersymmetries, with each pair combining to form an extended $N=4$ supersymmetry with non-trivial topological charges. The case of superconducting graphene is more involved, with the electrons localized on the vortex being associated with $n$ one dimensional supersymmetries, which in turn combine to form an $N=2n$ extended supersymmetry with no-trivial topological charges. As we shall prove, all supersymmetries are unbroken, a feature closely related to the number of the localized fermions and also to the exact form of the associated operators. In addition, the corresponding Witten index is invariant under compact and odd perturbations.

  4. Charged Local Defects in Extended Systems

    SciTech Connect (OSTI)

    Schultz, Peter A.

    1999-05-25T23:59:59.000Z

    The conventional approach to treating charged defects in extended systems in first principles calculations is via the supercell approximation using a neutralizing jellium background charge. I explicitly demonstrate shortcomings of this standard approach and discuss the consequences. Errors in the electrostatic potential surface over the volume of a supercell are shown to be comparable to a band gap energy in semiconductor materials, for cell sizes typically used in first principles simulations. I present an alternate method for eliminating the divergence of the Coulomb potential in supercell calculations of charged defects in extended systems that embodies a correct treatment of the electrostatic potential in the local viciniq of the a charged defect, via a mixed boundary condition approach. I present results of first principles calculations of charged vacancies in NaCl that illustrate the importance of polarization effects once an accurate representation of the local potential is obtained. These polarization effects, poorly captured in small supercells, also impact the energetic on the scale of typical band gap energies.

  5. Extended Supersymmetry in Gapped and Superconducting Graphene

    E-Print Network [OSTI]

    V. K. Oikonomou

    2014-11-30T23:59:59.000Z

    In view of the many quantum field theoretical descriptions of graphene in $2+1$ dimensions, we present another field theoretical feature of graphene, in the presence of defects. Particularly, we shall be interested in gapped graphene in the presence of a domain wall and also for superconducting graphene in the presence of a vortex. As we explicitly demonstrate, the gapped graphene electrons that are localized on the domain wall are associated with four $N=2$ one dimensional supersymmetries, with each pair combining to form an extended $N=4$ supersymmetry with non-trivial topological charges. The case of superconducting graphene is more involved, with the electrons localized on the vortex being associated with $n$ one dimensional supersymmetries, which in turn combine to form an $N=2n$ extended supersymmetry with no-trivial topological charges. As we shall prove, all supersymmetries are unbroken, a feature closely related to the number of the localized fermions and also to the exact form of the associated operators. In addition, the corresponding Witten index is invariant under compact and odd perturbations.

  6. Impacts of the extended-weight coal haul road system (interim report). Research report

    SciTech Connect (OSTI)

    Crabtree, J.D.; Pigman, J.G.; Deacon, J.A.; Agent, K.R.

    1993-10-01T23:59:59.000Z

    The Extended-Weight Coal Haul Road System, created by Kentucky`s Legislature in 1986, consists of all roads which carry over 50,000 tons of coal in a calendar year. Trucks hauling coal on this system are authorized to exceed normal weight limits through the payment of an annual decal fee. A research study was initiated in July of 1992 to analyze the impacts of the extended-weight system. This interim report prepared after one year of a three-year study, describes the analyses performed thus far and presents preliminary findings, recommendations, and a discussion of future work. Analyses in this report are based on: historical data on coal production and transportation; data from coal decal applications; interviews of legislators, transportation officials, coal company representatives, and coal trucking representatives: newspaper articles; vehicle classification data; a pavement cost analysis; and accident data. Preliminary conclusions include: (1) The extended-weight system has apparently been somewhat successful in accomplishing the primary objectives: to enhance the competitiveness and economic viability of Kentucky`s coal industry and to eliminate the perceived need for cal haulers to violate the law in order to be competitive; (2) Overall accident rates are no higher on the extended-weight system than on other comparable routes, but the fatal accident rate is significantly higher on the extended-weight system; (3) The coal-decal fee structure results in a net annual loss in Road Fund revenue of approximately $2 million; (4) Forty percent of the revenue from decal sales is allocated to the counties, although less than ten percent of the extended-weight system in county-maintained; (5) The heavier weights of coal-decal trucks add approximately $9 million annually to pavement overlay costs and increase other highway costs. (6) Road users throughout the state are subsidizing the movement of Kentucky coal by underwriting the increased costs.

  7. Whitacre College of Engineering Industrial Engineering Department

    E-Print Network [OSTI]

    Gelfond, Michael

    Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

  8. Faculty of Engineering & Design Industrial Placements

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Faculty of Engineering & Design Industrial Placements A guide for industry #12;Industrial placements The Faculty of Engineering & Design has built close links with engineering companies through research, projects, placements and graduate employees. We know that working with industry ensures our

  9. Competitive developments in the electric supply industry

    SciTech Connect (OSTI)

    Bruder, G.F.; Lively, M.

    1996-12-31T23:59:59.000Z

    Competition in the electric supply industry is outlined. The following topics are discussed: six impending major developments in the electric industry; recent and projected developments in the industry; where is the industry headed?; and what the future holds.

  10. Assessment of industrial attitudes toward generic research needs in tribology

    SciTech Connect (OSTI)

    Sibley, L.B.; Zlotnick, M.; Levinson, T.M.

    1985-09-01T23:59:59.000Z

    Based on extended discussions during visits with 27 companies representing 13 different parts of the tribology industry (such as bearings, lubricants, coatings, powerplants), it is apparent that only a tiny fraction of the large sums publicly reported as R and D expenditures by industry are used to fund generic tribology research. For example, of the greater than $2 B expenditures reported for R and D in the lubricants sector for 1982, the estimated total for generic tribology research was $12 M. This was the largest expenditure in any sector of the tribology industry and one-third of the total of $36 M. In the automotive industry out of a reported expenditure of $4 B, the estimated generic tribology research was $3 M. In some segments of the tribology industry, for example coatings and filters, there were no expenditures on generic research. There was little tendency to improve the state of the art of the tribology industry through long-term investment in generic R and D in ways that would foster innovation and productivity of energy conservation technology. Expenditures were oriented to development of specific commercial and military products, or to basic research focused on unspecified far term results, although useful spin-off of military developments into commercial fields sometimes occurs. There was a broad consensus in the companies visited that existing research results were not always made easily accessible to potential users in industry. The implication was that industry might benefit more if a larger fraction of the funds were devoted to putting the research results into a form design and development engineers could more readily apply. The need for a more effective presentation of research results was expressed with greater urgency at the smaller companies, but there seemed to be a broad consensus on the need for improvement. Recommendations are given.

  11. Research Projects in Industrial Technology.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration. Industrial Technology Section.

    1990-06-01T23:59:59.000Z

    The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the industrial sector, as well as other sectors, in its 1986 Power Plan. Specifically, the Council recommended that BPA operate a research and development program in conjunction with industry to determine the potential costs and savings from efficiency improvements in industrial processes which apply to a wide array of industrial firms.'' The section, composed of multidisciplinary engineers, provides technical support to the Industrial Programs Branch by designing and carrying out research relating to energy conservation in the industrial sector. The projects contained in this booklet are arranged by sector --industrial, utility, and agricultural -- and, within each sector, chronologically from ongoing to completed, with those projects completed most recently falling first. For each project the following information is given: its objective approach, key findings, cost, and contact person. Completed projects also include the date of completion, a report title, and report number.

  12. Biomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial | Mechanical | Petroleum Careers in Industrial Engineering

    E-Print Network [OSTI]

    Glowinski, Roland

    | Mechanical | Petroleum Careers in Industrial Engineering Manufacturing, service and retail industries hireBiomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial a significant number of industrial engineers. Specific industries include automobile manufacturers, electronics

  13. Eighth workshop on crystalline silicon solar cell materials and processes: Extended abstracts and papers

    SciTech Connect (OSTI)

    NONE

    1998-08-01T23:59:59.000Z

    The theme of this workshop is Supporting the Transition to World Class Manufacturing. This workshop provides a forum for an informal exchange of information between researchers in the photovoltaic and non-photovoltaic fields on various aspects of impurities and defects in silicon, their dynamics during device processing, and their application in defect engineering. This interaction helps establish a knowledge base that can be used for improving device fabrication processes to enhance solar-cell performance and reduce cell costs. It also provides an excellent opportunity for researchers from industry and universities to recognize mutual needs for future joint research. The workshop format features invited review presentations, panel discussions, and two poster sessions. The poster sessions create an opportunity for both university and industrial researchers to present their latest results and provide a natural forum for extended discussions and technical exchanges.

  14. Topological characterization in extended quantum Ising models

    E-Print Network [OSTI]

    G. Zhang; Z. Song

    2015-04-01T23:59:59.000Z

    We show that a class of exactly solvable quantum Ising models, including transverse-field Ising model and anisotropic XY model, can be characterized as the loops in a two-dimensional auxiliary space. The transverse-field Ising model corresponds to a circle and the XY model corresponds to an ellipse, while other models yield a Cardioid, Limacon, Hypocycloid, and Lissajous curves, et al.. It is shown that the variation of the ground state energy density, which is a function of the loop, experiences a non-analytical point when the winding number of the corresponding loop changes. The winding number can serve as a topological quantum number of the quantum phases in the extended quantum Ising model, which sheds some light upon the relation between quantum phase transition and the geometrical order parameter characterizing the phase diagram.

  15. The Physics Case for Extended Tevatron Running

    E-Print Network [OSTI]

    Darien R. Wood

    2010-11-06T23:59:59.000Z

    Run II of the Tevatron collider at Fermilab is currently scheduled to end late in 2011. Given the current performance of the collider and of the CDF and D0 detectors, it is estimated that the current data set could be approximately doubled with a run extended into 2014. A few examples are presented of the physics potential of these additional statistics. These are discussed in the context of the expected reach of the LHC 7 TeV data and the existing Tevatron data. In particular, an extraordinary opportunity is described which could probe the existence of a standard model Higgs boson with mass in the currently preferred region between 115 GeV and 150 GeV.

  16. The Physics Case for Extended Tevatron Running

    SciTech Connect (OSTI)

    Wood, Darien R.

    2010-11-01T23:59:59.000Z

    Run II of the Tevatron collider at Fermilab is currently scheduled to end late in 2011. Given the current performance of the collider and of the CDF and D0 detectors, it is estimated that the current data set could be approximately doubled with a run extended into 2014. A few examples are presented of the physics potential of these additional statistics. These are discussed in the context of the expected reach of the LHC 7 TeV data and the existing Tevatron data. In particular, an extraordinary opportunity is described which could probe the existence of a standard model Higgs boson with mass in the currently preferred region between 115 GeV and 150 GeV.

  17. The Industrialization of Thermoelectric Power Generation Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Industrialization of Thermoelectric Power Generation Technology The Industrialization of Thermoelectric Power Generation Technology Presents module and system requirements for...

  18. ITP Industrial Materials: Development and Commercialization of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Materials: Development and Commercialization of Alternative Carbon Fiber Precursors and Conversion Technologies ITP Industrial Materials: Development and...

  19. SPIDERS Joint Capability Technology Demonstration Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SPIDERS Joint Capability Technology Demonstration Industry Day Presentations SPIDERS Joint Capability Technology Demonstration Industry Day Presentations Presentations from the...

  20. Office of Industry Research and Technology Programs Greetings to Industry

    E-Print Network [OSTI]

    Ginzel, Matthew

    Assistant Vice President, Corporate & Foundation Relations Inside this issue... Greetings to Industry. The founding members are American Axle and Manufacturing, Eaton Corpora- tion and John Deere. This applied

  1. Curing Cognitive Hiccups: A Defense of The Extended Mind 

    E-Print Network [OSTI]

    Clark, Andy

    2007-01-01T23:59:59.000Z

    Human cognitive processing, according to the Extended Mind Hypothesis may at times extend into the environment surrounding the organism. Such a view should be contrasted with a nearby, (but much more conservative) view ...

  2. Design of Extended Warranties in Supply Chains under Additive Demand

    E-Print Network [OSTI]

    Li, Kumpeg; Mallik, Suman; Chhajed, Dilip

    2012-01-01T23:59:59.000Z

    We study the design of extended warranties in a supply chain consisting of a manufacturer and an independent retailer. The manufacturer produces a single product and sells it exclusively through the retailer. The extended ...

  3. Essays on Extended Service Contracts May 1st, 2008

    E-Print Network [OSTI]

    Sadeh, Norman M.

    1 Essays on Extended Service Contracts Tao Chen Defense May 1st, 2008 #12;2 Abstract Extended service contracts have been the major profit generator for many consumer electronics retailers of extended service contracts and how the ESC purchase decisions are related to the product purchase decisions

  4. Cardiovascular Signal Decomposition and Estimation with the Extended Kalman Smoother

    E-Print Network [OSTI]

    Cardiovascular Signal Decomposition and Estimation with the Extended Kalman Smoother James Mc of cardiovascular signals that can be used with the extended Kalman filter or smoother to simultaneously estimate with the extended Kalman filter and smoother to estimate and track all the model parameters of interest including

  5. Extending the GHS Weil Descent Attack No Author Given

    E-Print Network [OSTI]

    Hess, Florian

    Extending the GHS Weil Descent Attack No Author Given No Institute Given Abstract. In this paper we extend the Weil descent attack due to Gaudry, Hess and Smart (GHS) to a much larger class of elliptic curves. This extended attack applies to elds of composite degree over F2 . The principle behind

  6. Industry Supply Chain Development (Ohio)

    Broader source: Energy.gov [DOE]

    Supply Chain Development programs are focused on targeted industries that have significant growth opportunities for Ohio's existing manufacturing sector from emerging energy resources and...

  7. FAQS Reference Guide – Industrial Hygiene

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the November 2007 edition of DOE-STD-1138-2007, Industrial Hygiene Functional Area Qualification Standard.

  8. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    s Nuclear Industry After Fukushima Jingdong YUAN SummaryT he March 2011 Fukushima nuclear accident has had aand speedy responses to Fukushima-like and other unexpected

  9. Extended Forward Sensitivity Analysis for Uncertainty Quantification

    SciTech Connect (OSTI)

    Haihua Zhao; Vincent A. Mousseau

    2011-09-01T23:59:59.000Z

    Verification and validation (V&V) are playing more important roles to quantify uncertainties and realize high fidelity simulations in engineering system analyses, such as transients happened in a complex nuclear reactor system. Traditional V&V in the reactor system analysis focused more on the validation part or did not differentiate verification and validation. The traditional approach to uncertainty quantification is based on a 'black box' approach. The simulation tool is treated as an unknown signal generator, a distribution of inputs according to assumed probability density functions is sent in and the distribution of the outputs is measured and correlated back to the original input distribution. The 'black box' method mixes numerical errors with all other uncertainties. It is also not efficient to perform sensitivity analysis. Contrary to the 'black box' method, a more efficient sensitivity approach can take advantage of intimate knowledge of the simulation code. In these types of approaches equations for the propagation of uncertainty are constructed and the sensitivities are directly solved for as variables in the simulation. This paper presents the forward sensitivity analysis as a method to help uncertainty qualification. By including time step and potentially spatial step as special sensitivity parameters, the forward sensitivity method is extended as one method to quantify numerical errors. Note that by integrating local truncation errors over the whole system through the forward sensitivity analysis process, the generated time step and spatial step sensitivity information reflect global numerical errors. The discretization errors can be systematically compared against uncertainties due to other physical parameters. This extension makes the forward sensitivity method a much more powerful tool to help uncertainty qualification. By knowing the relative sensitivity of time and space steps with other interested physical parameters, the simulation is allowed to run at optimized time and space steps without affecting the confidence of the physical parameter sensitivity results. The time and space steps forward sensitivity analysis method can also replace the traditional time step and grid convergence study with much less computational cost. Several well defined benchmark problems with manufactured solutions are utilized to demonstrate the extended forward sensitivity analysis method. All the physical solutions, parameter sensitivity solutions, even the time step sensitivity in one case, have analytical forms, which allows the verification to be performed in the strictest sense.

  10. Extended Fractal Fits to Riemann Zeros

    E-Print Network [OSTI]

    Paul B. Slater

    2007-05-21T23:59:59.000Z

    We extend to the first 300 Riemann zeros, the form of analysis reported by us in arXiv:math-ph/0606005, in which the largest study had involved the first 75 zeros. Again, we model the nonsmooth fluctuating part of the Wu-Sprung potential, which reproduces the Riemann zeros, by the alternating-sign sine series fractal of Berry and Lewis A(x,g). Setting the fractal dimension equal to 3/2. we estimate the frequency parameter (g), plus an overall scaling parameter (s) introduced. We search for that pair of parameters (g,s) which minimizes the least-squares fit of the lowest 300 eigenvalues -- obtained by solving the one-dimensional stationary (non-fractal) Schrodinger equation with the trial potential (smooth plus nonsmooth parts) -- to the first 300 Riemann zeros. We randomly sample values within the rectangle 0 fractal supplementation. Some limited improvement is again found. There are two (primary and secondary) quite distinct subdomains, in which the values giving improvements in fit are concentrated.

  11. Extended silicate dust emission in PG QSOs

    E-Print Network [OSTI]

    M. Schweitzer; B. Groves; H. Netzer; D. Lutz; E. Sturm; A. Contursi; R. Genzel; L. J. Tacconi; S. Veilleux; D. -C. Kim; D. Rupke; A. J. Baker

    2008-01-30T23:59:59.000Z

    This paper addresses the origin of the silicate emission observed in PG QSOs, based on observations with the Spitzer Space Telescope. Scenarios based on the unified model suggest that silicate emission in AGN arises mainly from the illuminated faces of the clouds in the torus at temperatures near sublimation. However, detections of silicate emission in Type 2 QSOs, and the estimated cool dust temperatures, argue for a more extended emission region.To investigate this issue we present the mid-infrared spectra of 23 QSOs. These spectra, and especially the silicate emission features at ~10 and ~18 mu can be fitted using dusty narrow line region (NLR) models and a combination of black bodies. The bolometric luminosities of the QSOs allow us to derive the radial distances and covering factors for the silicate-emitting dust. The inferred radii are 100-200 times larger than the dust sublimation radius, much larger than the expected dimensions of the inner torus. Our QSO mid-IR spectra are consistent with the bulk of the silicate dust emission arising from the dust in the innermost parts of the NLR.

  12. Creating Value Wood Products Industry

    E-Print Network [OSTI]

    Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

  13. Forschungsschwerpunkt S92 Industrial Geometry

    E-Print Network [OSTI]

    JĂĽttler, Bert

    Forschungsschwerpunkt S92 Industrial Geometry http://www.ig.jku.at Computational Geometry Robot Kinematics Computer Aided Geometric Design Image Processing INDUSTRIAL GEOMETRY Classical Geometry Computer unwanted branches of the implicitly defined curves. Moreover, it is required for many applications, e

  14. Oklahoma Industrial Energy Management Program

    E-Print Network [OSTI]

    Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

    1979-01-01T23:59:59.000Z

    The need for sound energy management is no longer worthy of debate. Action is necessary and much is being done by U.S. industry. Unfortunately, however, the majority of the work is being done by the few large energy intensive industries throughout...

  15. Industrial Wastes as a Fuel

    E-Print Network [OSTI]

    Richardson, G.; Hendrix, W.

    1980-01-01T23:59:59.000Z

    available for coal since it was at one time a major industrial fuel and is still used extensively for electric power generation. However, combustion data for other fuels such as wood and solid materials typically generated as industrial wastes can only...

  16. Petroleum industry assists hurricane relief

    SciTech Connect (OSTI)

    Not Available

    1992-09-14T23:59:59.000Z

    This paper reports that the petroleum industry is aiding victims of last month's Hurricane Andrew with cash, clothing, food, water, and other supplies. Cash contributions announced as of last week totaled more than $2.7 million for distribution in South Florida and South Louisiana. Petroleum industry employees were collecting relief items such as bottled water and diapers for distribution in those areas.

  17. Career Choices: Industry vs. Academia

    E-Print Network [OSTI]

    Rohs, Remo

    Career Choices: Industry vs. Academia Yan Liu Assistant Professor Computer Science Department, IBM TJ Watson Research Center · Now, USC #12;1) What career path did you consider most during your Ph industry, and where can one make the most impact? · Best virtues in all jobs ­ Hardworking ­ Good attitude

  18. Integration of Business and Industrial Knowledge on Services to Set Trusted Business Communities of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ones) to define extended business service models, paying a particular attention on "fIntegration of Business and Industrial Knowledge on Services to Set Trusted Business Communities, the European Union promotes clearly internet of services based solutions to support innovative business

  19. E-Business Value Creation in Jordanian Banking Services Industry: An Empirical Analysis of Key Factors

    E-Print Network [OSTI]

    E-Business Value Creation in Jordanian Banking Services Industry: An Empirical Analysis of Key an extended conceptual research model for assessing the value of e-business at the bank level environment) that may affect value creation of carrying out e- business in Jordanian banking sector. Survey

  20. Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry Swindall, VP, Business & Industry Development, WI Economic Development Corporation Manuel Sattig, BMW Group

  1. Extended model for Richtmyer-Meshkov mix

    SciTech Connect (OSTI)

    Mikaelian, K O

    2009-11-18T23:59:59.000Z

    We examine four Richtmyer-Meshkov (RM) experiments on shock-generated turbulent mix and find them to be in good agreement with our earlier simple model in which the growth rate h of the mixing layer following a shock or reshock is constant and given by 2{alpha}A{Delta}v, independent of initial conditions h{sub 0}. Here A is the Atwood number ({rho}{sub B}-{rho}{sub A})/({rho}{sub B} + {rho}{sub A}), {rho}{sub A,B} are the densities of the two fluids, {Delta}V is the jump in velocity induced by the shock or reshock, and {alpha} is the constant measured in Rayleigh-Taylor (RT) experiments: {alpha}{sup bubble} {approx} 0.05-0.07, {alpha}{sup spike} {approx} (1.8-2.5){alpha}{sup bubble} for A {approx} 0.7-1.0. In the extended model the growth rate beings to day after a time t*, when h = h*, slowing down from h = h{sub 0} + 2{alpha}A{Delta}vt to h {approx} t{sup {theta}} behavior, with {theta}{sup bubble} {approx} 0.25 and {theta}{sup spike} {approx} 0.36 for A {approx} 0.7. They ascribe this change-over to loss of memory of the direction of the shock or reshock, signaling transition from highly directional to isotropic turbulence. In the simplest extension of the model h*/h{sub 0} is independent of {Delta}v and depends only on A. They find that h*/h{sub 0} {approx} 2.5-3.5 for A {approx} 0.7-1.0.

  2. AVLIS industrial access program

    SciTech Connect (OSTI)

    Not Available

    1984-11-15T23:59:59.000Z

    This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the project in a competitive procurement situation. As a result, costs and procurement risks are both reduced because the products provided come from within the AVLIS suppliers' experience base. At the same time, suppliers can benefit by the potential to participate in AVLIS technology spin-off markets. 35 figures.

  3. Energy conservation guide for industrial processes

    SciTech Connect (OSTI)

    Not Available

    1981-01-01T23:59:59.000Z

    Th Energy Conservation Guide for industrial processes has simple instructions to survey energy use areas at Navy industrial activities like shipyards, Naval air rework facilities and government owned, contractor operated (GOCO) plants. This guide includes information and procedures on: organizing and conducting an industrial energy survey; evaluating purchased energy data; descriptions of industrial systems; and evaluation of industrial processes for conservation.

  4. AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A

    E-Print Network [OSTI]

    AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A Donald Bradley Morgan Bruns Adam Fleming Jay Ling on the automotive industry, specifically, large-scale manufacturers of automobiles. The automotive industry of the automotive industry. This is followed by an analysis of the industry's structural characteristics using

  5. MECH 386 INDUSTRIAL FLUID MECHANICS INDUSTRIAL FLUID MECHANICS

    E-Print Network [OSTI]

    technologies - Wind turbine - Wave energy (Wells turbine) - Tidal power 7. Flow in porous media - Darcy's law 8 - Positive displacement pumps - Systems of pumps - Industrial practice (Guest speaker) 6. Renewable energy

  6. The industrial ecology of the iron casting industry

    E-Print Network [OSTI]

    Jones, Alissa J. (Alissa Jean)

    2007-01-01T23:59:59.000Z

    Metal casting is an energy and materials intensive manufacturing process, which is an important U.S. industry. This study analyzes iron casting, in particular, for possible improvements that will result in greater efficiencies ...

  7. Conference Paper for Electricity Industry in Transition: Issues and Prospects for Asia, Bangkok, Thailand, Jan. 14-16, 2004. 2003 Dennis Ray and Frank Wayno

    E-Print Network [OSTI]

    and Education in a Transitioning Electric Power Industry Dennis Ray Executive Director Power Systems Engineering if they are considered as much a part of the electric supply industry infrastructure as poles and wires. By putting, in some cases over an extended period of time. Historically, the electric-power system has been vertically

  8. Upper crustal faulting in an obliquely extending orogen, structural...

    Open Energy Info (EERE)

    faulting in an obliquely extending orogen, structural control on permeability and production in the Coso Geothermal Field, eastern California Jump to: navigation, search OpenEI...

  9. Extending the Temperature Range of Electric Submersible Pumps...

    Broader source: Energy.gov (indexed) [DOE]

    0 4.4.5 Extending the Temperature Range of Electric Submersible Pumps to 338 C - Hotline IV - High-temperature ESP Presentation Number: 019 Investigator: Dhruva, Brindesh...

  10. Multi-unit Auctions with Unknown Supply [Extended Abstract

    E-Print Network [OSTI]

    Saberi, Amin

    Multi-unit Auctions with Unknown Supply [Extended Abstract] Mohammad Mahdian Microsoft Research Redmond, WA, USA mahdian@microsoft.com Amin Saberi Stanford University Stanford, CA, USA saberi

  11. Energy Department And University of California Extend Management...

    National Nuclear Security Administration (NNSA)

    Apply for Our Jobs Our Jobs Working at NNSA Blog Home Media Room Press Releases Energy Department And University of California Extend ... Energy Department And University of...

  12. Microsoft BPA proposal extends Port Townsend Paper contract nine...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is adopted. BPA is proposing to amend Port Townsend Paper Company's existing power purchase contract extending the term of the contract until September 2022,...

  13. Uranium Leasing Program Draft PEIS Public Comment Period Extended...

    Broader source: Energy.gov (indexed) [DOE]

    Uranium Leasing Program Draft PEIS Public Comment Period Extended to May 31, 2013 Draft ULPEIS comment extension community notification041813 (3).pdf More Documents & Publications...

  14. Upper crustal structure of an obliquely extending orogen, central...

    Open Energy Info (EERE)

    eastern California Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Upper crustal structure of an obliquely extending orogen, central...

  15. Online Condition Monitoring to Enable Extended Operation of Nuclear Power Plants

    SciTech Connect (OSTI)

    Meyer, Ryan M.; Bond, Leonard J.; Ramuhalli, Pradeep

    2012-03-31T23:59:59.000Z

    Safe, secure, and economic operation of nuclear power plants will remain of strategic significance. New and improved monitoring will likely have increased significance in the post-Fukushima world. Prior to Fukushima, many activities were already underway globally to facilitate operation of nuclear power plants beyond their initial licensing periods. Decisions to shut down a nuclear power plant are mostly driven by economic considerations. Online condition monitoring is a means to improve both the safety and economics of extending the operating lifetimes of nuclear power plants, enabling adoption of proactive aging management. With regard to active components (e.g., pumps, valves, motors, etc.), significant experience in other industries has been leveraged to build the science base to support adoption for online condition-based maintenance and proactive aging management in the nuclear industry. Many of the research needs are associated with enabling proactive management of aging in passive components (e.g., pipes, vessels, cables, containment structures, etc.). This paper provides an overview of online condition monitoring for the nuclear power industry with an emphasis on passive components. Following the overview, several technology/knowledge gaps are identified, which require addressing to facilitate widespread online condition monitoring of passive components.

  16. Individual and group electronic brainstorming in an industrial setting.

    SciTech Connect (OSTI)

    Dornburg, Courtney C.; Stevens, Susan Marie; Davidson, George S.; Hendrickson, Stacey M. Langfitt

    2008-05-01T23:59:59.000Z

    An experiment was conducted comparing the effectiveness of individual versus group electronic brainstorming in addressing real-world 'wickedly difficult' challenges. Previous laboratory research has engaged small groups of students in answering questions irrelevant to an industrial setting. The current experiment extended this research to larger, real-world employee groups engaged in addressing organization-relevant challenges. Within the present experiment, the data demonstrated that individuals performed at least as well as groups in terms of number of ideas produced and significantly (p < .02) outperformed groups in terms of the quality of those ideas (as measured along the dimensions of originality, feasibility, and effectiveness).

  17. Industrial stator vane with sequential impingement cooling inserts

    DOE Patents [OSTI]

    Jones, Russell B; Fedock, John A; Goebel, Gloria E; Krueger, Judson J; Rawlings, Christopher K; Memmen, Robert L

    2013-08-06T23:59:59.000Z

    A turbine stator vane for an industrial engine, the vane having two impingement cooling inserts that produce a series of impingement cooling from the pressure side to the suction side of the vane walls. Each insert includes a spar with a row of alternating impingement cooling channels and return air channels extending in a radial direction. Impingement cooling plates cover the two sides of the insert and having rows of impingement cooling holes aligned with the impingement cooling channels and return air openings aligned with the return air channel.

  18. Canada's Voluntary Industrial Energy Conservation Program

    E-Print Network [OSTI]

    Wolf, C. A., Jr.

    1980-01-01T23:59:59.000Z

    Industrial Energy Conservation in Canada is organized and promoted through a voluntary program that is administered by industry. Industry is divided into fifteen sectors, each of which is represented by a Voluntary Task Force. Information exchange...

  19. Heat Recovery in the Forge Industry

    E-Print Network [OSTI]

    Shingledecker, R. B.

    1982-01-01T23:59:59.000Z

    Department of Energy figures reveal that in 1979 the forging and stamping operations were the primary consumers of energy (27%) within the 'Fabricated Metals Products Industry' (SIC 34). Industrial furnaces utilized by the forging industry often...

  20. Industrial Geospatial Analysis Tool for Energy Evaluation

    E-Print Network [OSTI]

    Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

    2013-01-01T23:59:59.000Z

    of manufacturing industries based on each type of industries using information from DOE's Industrial Assessment Center database (IAC-DB) and DOE's Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition...

  1. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2011/2012 September).................1 REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH (30).....................................................................................................2 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  2. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2010/2011 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH)...................................................................................................1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  3. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2009/2010 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING (30 CREDITS)...............1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  4. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2013/2014 September..............................3 C. COURSE REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS............................4 E. DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH

  5. Industrial Heat Pumps: Where and When 

    E-Print Network [OSTI]

    Ranade, S. M.; Chao, Y. T.

    1989-01-01T23:59:59.000Z

    A brief review of the types of industrial heat pumps is presented. General guidelines are provided for appropriate placement of industrial heat pumps. Industrial applications are used as examples to illustrate key points.

  6. Effective Transfer of Industrial Energy Conservation Technologies

    E-Print Network [OSTI]

    Clement, M.; Vallario, R. W.

    1983-01-01T23:59:59.000Z

    , and acceptance by industry of new energy conserving technologies. These new technologies were developed through cost sharing programs between the Department of Energy and private industry. These joint efforts reduced the risk to industry, thus making them willing...

  7. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    Brief 2013-9 January 2013 China’s Nuclear Industry Aftera significant impact on the future of China’s nuclear power.the importance of safety as China builds more nuclear power

  8. Energy Savings in Industrial Buildings 

    E-Print Network [OSTI]

    Zhou, A.; Tutterow, V.; Harris, J.

    2009-01-01T23:59:59.000Z

    , and electricity for equipment such as pumps, air compressors, and fans. Lesser, yet significant, amounts of energy are used for industrial buildings – heating, ventilation, and air conditioning (HVAC), lighting and facility use (such as office equipment). Due...

  9. CALIFORNIA ENERGY PETROLEUM INDUSTRY INFORMATION

    E-Print Network [OSTI]

    PETROLEUM AND NON-PETROLEUM ................................................... 40 PRODUCT DEFINITIONS Major Petroleum Product Storer and Terminal Weekly Report Major petroleum product storers, terminalCALIFORNIA ENERGY COMMISSION PETROLEUM INDUSTRY INFORMATION REPORTING ACT (PIIRA) PROGRAM REPORTING

  10. Industrial Plans for AEO2014

    U.S. Energy Information Administration (EIA) Indexed Site

    you for your attention 10 Industrial Team Washington DC, July 30, 2013 Macro Team: Kay Smith (202) 586-1132 | kay.smith@eia.gov Vipin Arora (202) 586-1048 | vipin.arora@eia.gov...

  11. Three Essays on Industrial Organization

    E-Print Network [OSTI]

    Lee, Yang Seung

    2008-12-18T23:59:59.000Z

    The dissertation discusses issues in the field of industrial organization. When the government provides better infrastructure to competing firms for innovation, private firms' R&D expenditures are affected. When the ...

  12. Hazardous and Industrial Waste (Minnesota)

    Broader source: Energy.gov [DOE]

    This section describes standards that must be met by facilities generating and processing hazardous and industrial waste, as well as required permits for the construction and operation of such a...

  13. Uncertainty, investment, and industry evolution

    E-Print Network [OSTI]

    Caballero, Ricardo J.

    1992-01-01T23:59:59.000Z

    We study the effects of aggregate and idiosyncratic uncertainty on the entry of firms, total investment, and prices in a competitive industry with irreversible investment. We first use standard dynamic programming methods ...

  14. Outlook for Industrial Energy Benchmarking 

    E-Print Network [OSTI]

    Hartley, Z.

    2000-01-01T23:59:59.000Z

    OUTLOOK FOR INDUSTRIAL ENERGY BENCHMARKING Zoe Hartley Environmental Protection Specialist U.S. Environmental Protection Agency Washington, DC ABSTRACT The U.S. Environmental Protection Agency is exploring options to sponsor an ~d~ ~~gy...

  15. Changing Trends in Telecommunications Industry

    E-Print Network [OSTI]

    Sathyanarayanan, Ramachandran

    2010-12-17T23:59:59.000Z

    The mobile telecommunication industry is one of the fastest growing and continually changing markets in the world today. The greatest achievement of wireless technology is that it has made communications possible in the ...

  16. Innovative Energy Efficient Industrial Ventilation

    E-Print Network [OSTI]

    Litomisky, A.

    2005-01-01T23:59:59.000Z

    factories, we found striking dichotomy between the classical “static” design of ventilation systems and constantly changing workflow and business demands. Using data from real factories, we are able to prove that classical industrial ventilation design...

  17. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    2013-9 January 2013 China’s Nuclear Industry After FukushimaMarch 2011 Fukushima nuclear accident has had a significanton the future of China’s nuclear power. First, it highlights

  18. Industrial Mathematics and Inverse Problems

    E-Print Network [OSTI]

    Fulmek, Markus

    #12;The Industrial Mathematics Structure in Linz 5 #12;The Blast Furnace Process 6 #12;Aims": Looking for causes of an observed or desired effect! A.Tikhonov ( 1936), geophysical problems. F

  19. Outlook for Industrial Energy Benchmarking

    E-Print Network [OSTI]

    Hartley, Z.

    The U.S. Environmental Protection Agency is exploring options to sponsor an industrial energy efficiency benchmarking study to identify facility specific, cost-effective best practices and technologies. Such a study could help develop a common...

  20. Integrated Industrial Wood Chip Utilization

    E-Print Network [OSTI]

    Owens, E. T.

    1984-01-01T23:59:59.000Z

    The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

  1. Electric Utility Industrial Conservation Programs

    E-Print Network [OSTI]

    Norland, D. L.

    1983-01-01T23:59:59.000Z

    The Alliance to Save Energy conducted a study, funded by the John A. Hartford Foundation, of industrial and commercial electricity conservation opportunities in the service territory of Arkansas Power and Light Company (AP&L). The study determined...

  2. High-lift chemical heat pump technologies for industrial processes

    SciTech Connect (OSTI)

    Olszewski, M.; Zaltash, A.

    1995-03-01T23:59:59.000Z

    Traditionally industrial heat pumps (IHPs) have found applications on a process specific basis with reject heat from a process being upgraded and returned to the process. The IHP must be carefully integrated into a process since improper placement may result in an uneconomic application. Industry has emphasized a process integration approach to the design and operation of their plants. Heat pump applications have adopted this approach and the area of applicability was extended by utilizing a process integrated approach where reject heat from one process is upgraded and then used as input for another process. The DOE IHP Program has extended the process integration approach of heat pump application with a plant utility emphasis. In this design philosophy, reject heat from a process is upgraded to plant utility conditions and fed into the plant distribution system. This approach has the advantage that reject heat from any pr@s can be used as input and the output can be used at any location within the plant. Thus the approach can be easily integrated into existing industrial applications and all reject heat streams are potential targets of opportunity. The plant utility approach can not be implemented without having heat pumps with high-lift capabilities (on the order of 65{degree}C). Current heat pumps have only about half the lift capability required. Thus the current emphasis for the DOE IHP Program is the development of high lift chemical heat pumps that can deliver heat more economically to higher heat delivery temperatures. This is achieved with innovative cooling (refrigeration) and heating technologies which are based on advanced cycles and advanced working fluids or a combination of both. This paper details the plan to develop economically competitive, environmentally acceptable heat pump technologies that are capable of providing the delivery temperature and lift required to supply industrial plant utility-grade process heating and/or cooling.

  3. EPRI's Industrial Energy Management Program

    E-Print Network [OSTI]

    Mergens, E.; Niday, L.

    EPRI's INDUSTRIAL ENERGY MANAGEMENT PROGRAM ED MERGENS MANAGER EPRI's CHEMICALS & PETROLEUM OFFICE HOUSTON, TEXAS ABSTRACT The loss of American industry jobs to foreign competition is made worse by national concerns over fuels combustion... are funded at a level in excess of SlO million annually. By providing technical guidance and sponsoring research and development projects, these Centers and Offices are a key element in EPRI's role of improving the value of electricity to consumers...

  4. Colorado State University Industrial Assessment Center Saves...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Assessment Center, inspects equipment at a manufacturing facility during an energy audit. | Photo courtesy of University of Missouri IAC. Industrial Assessment Centers...

  5. Emerging energy-efficient technologies for industry

    E-Print Network [OSTI]

    2001-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for2000. “Emerging Energy-Efficient Industrial Technologies,”Emerging Energy-Efficient Technologies for Industry Ernst

  6. Emerging Energy-Efficient Technologies for Industry

    E-Print Network [OSTI]

    2005-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for200 emerging energy-efficient technologies in industry, of2000. “Emerging Energy-Efficient Industrial Technologies,”

  7. Emerging energy-efficient technologies for industry

    E-Print Network [OSTI]

    2004-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for2000. “Emerging Energy-Efficient Industrial Technologies,”Emerging Energy-Efficient Technologies for Industry Ernst

  8. Green Industrial Policy: Trade and Theory

    E-Print Network [OSTI]

    Karp, Larry; Stevenson, Megan

    2012-01-01T23:59:59.000Z

    Papers Year 2012 Paper 1126 Green Industrial Policy: Trade© 2012 by author(s). Green Industrial Policy: Trade andreality and the potential for green indus- trial policy. We

  9. Industrial and Organizational Psychology Doctoral Program Handbook

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Industrial and Organizational Psychology Doctoral Program Handbook University of Central Florida chosen the University of Central Florida for your graduate training in Industrial and Organizational

  10. ITP Industrial Distributed Energy: Distributed Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ITP Industrial Distributed Energy: Distributed Energy Program Project Profile: Verizon Central Office Building ITP Industrial Distributed Energy: Distributed Energy Program Project...

  11. Tax-Exempt Industrial Revenue Bonds (Kansas)

    Broader source: Energy.gov [DOE]

    Tax-Exempt Industrial Revenue Bonds are issued by cities and counties for the purchase, construction, improvement or remodeling of a facility for agricultural, commercial, hospital, industrial,...

  12. EIS-0428: Mississippi Gasification, LLC, Industrial Gasification...

    Broader source: Energy.gov (indexed) [DOE]

    8: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS EIS-0428: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS...

  13. ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aluminum Industry Vision: Sustainable Solutions for a Dynamic World ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions for a Dynamic World alumvision.pdf More Documents...

  14. EIS-0429: Indiana Gasification, LLC, Industrial Gasification...

    Office of Environmental Management (EM)

    9: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport, IN and CO2 Pipeline EIS-0429: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport,...

  15. Joint Capability Technology Demonstration (JCTD) Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Agenda outlines the activities of the 2014...

  16. Industrial Energy Efficiency and Climate Change Mitigation

    E-Print Network [OSTI]

    Worrell, Ernst

    2009-01-01T23:59:59.000Z

    mitigate 21 MtCO 2 . Cogeneration (also called Combined Heatefficiencies. Industrial cogeneration is an important partpotential for industrial cogeneration is estimated at almost

  17. Effect of different extenders and storage temperatures on sperm viability

    E-Print Network [OSTI]

    Zaragoza, Universidad de

    a split-sample technique, in four different extenders: one for milk (Mi), one for sodium citrate (Na better than both the sodium citrate- and the milk-based extender did when liquid ram semen was stored up to ram spermatozoa and impair fertility [3±6], fresh diluted and cooled ram semen might be an alternative

  18. Extended Kalman Filter Using a Kernel Recursive Least Squares Observer

    E-Print Network [OSTI]

    Slatton, Clint

    Extended Kalman Filter Using a Kernel Recursive Least Squares Observer Pingping Zhu, Badong Chen estimation problem combining the extended Kalman filter (EKF) with a kernel recursive least squares (KRLS Kalman filter, EKF and KRLS algorithms. Results demonstrate that the performance of the EKF

  19. Buoyant melting instabilities beneath extending lithosphere: 1. Numerical models

    E-Print Network [OSTI]

    Tackley, Paul J.

    Buoyant melting instabilities beneath extending lithosphere: 1. Numerical models John W. Hernlund,1,2 Paul J. Tackley,1,3 and David J. Stevenson4 Received 18 November 2006; revised 18 October 2007 diffusely extending lithosphere is studied using numerical convection models covering a wide range

  20. Extending Greenland temperature records into the late eighteenth century

    E-Print Network [OSTI]

    Feigon, Brooke

    Extending Greenland temperature records into the late eighteenth century B. M. Vinther,1 K. K records for Greenland reach back to the late nineteenth century at a few sites. Combining early record back to the year 1784. The new extended Greenland temperature record is 9% incomplete. There are

  1. EXTENDED SIMPLE COLORED PETRI NETS: A TOOL FOR PLANT SIMULATION

    E-Print Network [OSTI]

    Coglio, Alessandro

    EXTENDED SIMPLE COLORED PETRI NETS: A TOOL FOR PLANT SIMULATION Antonio Camurri and Alessandro, I­16145 Genova, Italy {music, tokamak}@dist.unige.it ABSTRACT Extended Simple Colored Petri Nets (ESCP­nets) are a new class of High­level Petri Nets conceived as a good trade­off between Petri Nets (P­nets

  2. Extending Neuro-evolutionary Preference Learning through Player Modeling

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Extending Neuro-evolutionary Preference Learning through Player Modeling H´ector P. Mart approach extends neuro-evolutionary preference learning by embedding a player modeling module preferences of users using neuro-evolutionary pref- erence learning has provided highly accurate computational

  3. amenagement durables industrie: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CLUSTERS? INDUSTRY CLUSTERS IN MINNESOTA INDUSTRY CLUSTER APPROACHES IN MINNESOTA INDUSTRY CLUSTER Levinson, David M. 379 Energy Conservation in China North Industries...

  4. Corrosion inhibitors in the electronic industry

    SciTech Connect (OSTI)

    Brusic, V. [IBM, Yorktown Heights, NY (United States). Thomas J. Watson Research Center

    1996-12-01T23:59:59.000Z

    The most widely used inhibitors in the electronics industry are chromates, phosphates, and silicates in chip processing and azoles in printed circuit board (PCB) fabrication. Azoles are the principal constituents of Organic Solderability Preservatives (OSPS) used on bare copper that could replace Hot Air Solder Leveling (HASL). For years HASL has been the most prevalent surface finishing process in PCB fabrication. This process is currently under scrutiny, because of safety and environment concerns (lead exposure, waste disposal), process limitations (stress, extendibility to fine-pitch device assembly), and cost. The use of azoles is a cost-effective solution to these concerns but it is also a source of new ones. Aside from being typical corrosion inhibitors, the azoles are expected to provide protection to a copper surface against thermal oxidation yet at higher temperatures inhibitors themselves are not stable. The challenge of bringing azoles to PCB manufacture has resulted in close interaction of the board shop, assembly customer, and the OSP chemistry suppliers. This paper is an overview of the relevant work in which a compromise between process demands and achievable inhibitor performance is discussed.

  5. Economic analysis of the European cement industry

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Economic analysis of the European cement industry Marcel Boyer1 and JeanPierre Ponssard2 December 2013. The methodology is applied to the European cement industry over the period 20042012 (Part I) and over the next and industry experts. Key words: return on assets, capital intensive industry, business cycle, European cement

  6. What does an Industrial Engineer really do???

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    What does an Industrial Engineer really do??? #12;What you will learn · What Industrial Engineering is · Examples of Industrial Engineering (IE) activities · The advantages of an IE college degree #12;Engineering does that engineer do? Where? #12;Industrial Engineers Find a Better Way... · A better way to make

  7. Mechanical and Industrial Engineering John Stuart

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical and Industrial Engineering John Stuart Paul Washburn Co-Chairs MIE IAB Meeting #12;2Mechanical and Industrial Engineering Dean Tim Anderson #12;3Mechanical and Industrial Engineering Strategic vision for growing College Goal Method Current resources #12;4Mechanical and Industrial Engineering

  8. Faculty of Engineering Industrial and Manufacturing

    E-Print Network [OSTI]

    Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

  9. Industrial & Systems Engineering Areas of Engineering Interests

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

  10. Pollution Prevention and New Industrial Estates

    E-Print Network [OSTI]

    Heal, Kate

    1 Pollution Prevention and New Industrial Estates Chris Pittner Associate Director WSP 21 May 2012 POLLUTION PREVENTION AND NEW INDUSTRIAL ESTATES Pollution within Industrial Estates Legal Framework and Guidance Surface Water Management Project Examples #12;2 POLLUTION WITHIN INDUSTRIAL ESTATES Sources Poor

  11. Agricultural productivity and industrialization: A reformulation

    E-Print Network [OSTI]

    Bandyopadhyay, Antar

    Agricultural productivity and industrialization: A reformulation Debasis Mondal Sept 20, 2014 Abstract In this paper we examine the role of agricultural productivity on the process of industrialization industrialization by releasing labor from agriculture to industry. In fact, when agriculture is highly productive

  12. Advanced Manufacturing Office (Formerly Industrial Technologies Program)

    E-Print Network [OSTI]

    Advanced Manufacturing Office (Formerly Industrial Technologies Program) Leo Christodoulou Jamie August 11, 2011 #12;Background and Opportunity Background Industry accounts for 30% of energy consumption-value industries such as the renewable energy industry. Example materials include low-cost carbon fiber, low

  13. Industrial applications of electron accelerators

    E-Print Network [OSTI]

    Cleland, M R

    2006-01-01T23:59:59.000Z

    This paper addresses the industrial applications of electron accelerators for modifying the physical, chemical or biological properties of materials and commercial products by treatment with ionizing radiation. Many beneficial effects can be obtained with these methods, which are known as radiation processing. The earliest practical applications occurred during the 1950s, and the business of radiation processing has been expanding since that time. The most prevalent applications are the modification of many different plastic and rubber products and the sterilization of single-use medical devices. Emerging applications are the pasteurization and preservation of foods and the treatment of toxic industrial wastes. Industrial accelerators can now provide electron energies greater than 10 MeV and average beam powers as high as 700 kW. The availability of high-energy, high-power electron beams is stimulating interest in the use of X-rays (bremsstrahlung) as an alternative to gamma rays from radioactive nuclides.

  14. SymposiumandIndustrialAffiliatesProgramLightinAction Industrial Affiliates Program

    E-Print Network [OSTI]

    Van Stryland, Eric

    Session I Abstract: Recently Additive Manufacturing (AM) has been hailed as the "third industrial Platform for precision additive manufacturing largely depends on the speed and accuracy of in-situ optical Dean & Director, CREOL, UCF Symposium: Light in Action Session I. Manufacturing 9:15 Advances

  15. MIT and Life Sciences & Health Care Industries MIT Industry Brief

    E-Print Network [OSTI]

    Polz, Martin

    the interface between inorganic and organic materials for applications to energy, medicine, electronics have been used in applications as varied as solar cells, batteries, medical diagnostics and basic. The Institute for Soldier Nanotechnologies (ISN) is a team of MIT, U.S. Army, and industry partners working

  16. MIT and the Building/Construction Industries MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    devoted to improving the ability of companies to efficiently customize products and services in various in these areas. Please note that this is not a comprehensive summary of research being conducted at MIT in the topic areas listed above. MIT's Industrial Liaison Program (ILP) can bring the intellectual power of MIT

  17. Automating An Industrial Power Plant 

    E-Print Network [OSTI]

    Williams, D. R.; McCowen, R. R.

    1987-01-01T23:59:59.000Z

    and electricity requirements of the Component Works as well as all of the heat and a portion of the electricity needed by the adjacent John Deere Foundry. This paper describes the automation of an eXisting industrial power plant and tells how the project...AUTlliATING AN INDUSTRIAL POWER PLANT DAVID R. WILLIAMS, P.E. Energy Coordi?nator John Deere Component Works Waterloo, Iowa ABSTRACT The need for an upgrade of boiler and turbine controls in the 15 MW coal-fired cogeneration plant...

  18. The Omniscient Garbage Collector: a Resource Analysis Framework (extended abstract)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    The Omniscient Garbage Collector: a Resource Analysis Framework (extended abstract) Aurélien point of view, we develop the omniscient garbage collector (OGC), which decides precisely when the resource index requires an omniscient garbage collector, a NP-complete problem tightly connected

  19. Zerocash: Decentralized Anonymous Payments from Bitcoin (extended version)

    E-Print Network [OSTI]

    Zerocash: Decentralized Anonymous Payments from Bitcoin (extended version) Eli Ben Bitcoin is the first digital currency to see widespread adoption. Although payments are conducted between pseudonyms, Bitcoin cannot offer strong privacy guarantees: payment transactions are recorded in a public

  20. Assessment for the extended uses of historic structures 

    E-Print Network [OSTI]

    Brune, Geoffrey John

    1996-01-01T23:59:59.000Z

    This thesis constructs a tool for assessing the interventions required to extend the use of historic properties in historic districts. The continued use of these structures, either historically noteworthy or important as contributing to the context...

  1. Accelerating the development of complex products in extended enterprises

    E-Print Network [OSTI]

    Dawson, Benjamin Alan

    2011-01-01T23:59:59.000Z

    This thesis examines strategies to accelerate product development in a large commercial aerospace program structured as an extended enterprise where first and second tier suppliers perform most of the detailed product ...

  2. Assessment for the extended uses of historic structures

    E-Print Network [OSTI]

    Brune, Geoffrey John

    1996-01-01T23:59:59.000Z

    This thesis constructs a tool for assessing the interventions required to extend the use of historic properties in historic districts. The continued use of these structures, either historically noteworthy or important as contributing to the context...

  3. On the Hardness of Optimal Auctions (Extended Abstract)

    E-Print Network [OSTI]

    Saberi, Amin

    On the Hardness of Optimal Auctions (Extended Abstract) Amir Ronen #3; Amin Saberi y Abstract We Berkeley. Email: saberi@cc.gatech.edu. problem which is perhaps the most basic in optimal auction design

  4. Extending STI for Demanding Hard-Real-Time Systems Deepaksrivats

    E-Print Network [OSTI]

    Dean, Alexander G.

    Extending STI for Demanding Hard-Real-Time Systems Benjamin Welch Shobhit Kanaujia Adarsh Seetharam to implement given functionality on a generic processor, saving money, power, and energy and simplifying design

  5. Energy Flow in Extended Gradient Partial Differential Equations

    E-Print Network [OSTI]

    Energy Flow in Extended Gradient Partial Differential Equations Th. Gallay S. Slijepâ??atiment 425 BijeniŸcka 30 F­91405 Orsay, France 10000 Zagreb, Croatia Thierry.Gallay@math.u­psud.fr slijepce

  6. New Development of Self-Interaction Corrected DFT for Extended...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DFT-SIC calculation can be carried out efficiently even for extended systems. Using this new development the formation energies of defects in 3C-SiC were calculated and compared...

  7. Accuracy of Reduced and Extended Thin-Wire Kernels

    SciTech Connect (OSTI)

    Burke, G J

    2008-11-24T23:59:59.000Z

    Some results are presented comparing the accuracy of the reduced thin-wire kernel and an extended kernel with exact integration of the 1/R term of the Green's function and results are shown for simple wire structures.

  8. Quantization of extended SchrÄodinger-Virasoro Lie algebra

    E-Print Network [OSTI]

    Lamei Yuan; Liji Zhou

    2010-04-21T23:59:59.000Z

    In present paper, we quantize the extended Schr\\"Aodinger-Virasoro Lie algebra in char- acteristic zero with its Lie bialgebra structures classified by Yuan-Wu-Xu, and get a new Hopf algebra.

  9. Generalized covariation and extended Fukushima decompositions for Banach valued processes.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Generalized covariation and extended Fukushima decompositions for Banach valued processes corresponding results when B = C([-, 0]) and X = X(·). This will consitute a significant Fukushima decomposition random variables, Malliavin calculus, Generalized Fukushima decomposition. LUISS Guido Carli - Libera

  10. NPDES Individual Permit for Industrial Facilities - Mail Merge...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WATER DISCHARGES ASSOCIATED WITH INDUSTRIAL ACTIVITY FROM FABRICATED METAL PRODUCTS INDUSTRY......44 I. CONTENTS OF PLAN. ......

  11. Kick circulation analysis for extended reach and horizontal wells

    E-Print Network [OSTI]

    Long, Maximilian Mark

    2005-02-17T23:59:59.000Z

    KICK CIRCULATION ANALYSIS FOR EXTENDED-REACH AND HORIZONTAL WELLS A Thesis by MAXIMILIAN M. LONG Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 2004 Major Subject: Petroleum Engineering KICK CIRCULATION ANALYSIS FOR EXTENDED-REACH AND HORIZONTAL WELLS A Thesis by MAXIMILIAN M. LONG Submitted...

  12. Extended cage adjustable speed electric motors and drive packages

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN)

    1999-01-01T23:59:59.000Z

    The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced.

  13. A subliminal manipulation of the Extended Parallel Process Model

    E-Print Network [OSTI]

    Stephenson, Michael Taylor

    1993-01-01T23:59:59.000Z

    the context of skin cancer. The goals of this study were to (1) assess the effects of subliminal embeds as fear appeals (2) within the framework of the Extended Parallel Process Model, the EPPM (Witte, 1992a). While this study demonstrated that subliminal... go unnoticed by individuals (Dixon, 1981). To extend the inquiry into subliminal message processing, this project places embedded pictures (a form of subliminal research) in the context of skin cancer This thesis uses the style of mm ni ' n...

  14. Certificate Industrial and Systems Engineering

    E-Print Network [OSTI]

    Su, Xiao

    Six Sigma Certificate Industrial and Systems Engineering San José State University September, 2008 #12;1 Lean Enterprise and Six Sigma Lean Enterprise about transforming the old mass production-to-cradle design, incorporating design for manufacturability, reproducibility, product lifecycle, etc. Six Sigma

  15. Oklahoma Industrial Energy Management Program

    E-Print Network [OSTI]

    Turner, W. C.; Estes, C. B.

    1982-01-01T23:59:59.000Z

    In Oklahoma, industry consumes about 35% of the total energy consumed. While it is true that much work has been done in the larger companies, most small to medium sized companies have yet to undertake a substantial energy management program. Often...

  16. PETROLEUM INDUSTRY INFORMATION REPORTING ACT

    E-Print Network [OSTI]

    compliance. The Energy Commission uses the new refinery reports when creating the Weekly Fuels Watch Report refinery production and inventories. Monthly data of refinery inputs and outputs have a variety of regular use data by refineries to support analyses of total energy use by industry type within the state

  17. Electrified Separation Processes in Industry

    E-Print Network [OSTI]

    Appleby, A. J.

    1983-01-01T23:59:59.000Z

    distillation, in the chemical and related industries is very considerable. The majority of the energy used for these separations is thermal input in the form of the low heating-value of oil or gas. From the national viewpoint, it would be advantageous...

  18. Benchmarks for industrial energy efficiency

    SciTech Connect (OSTI)

    Amarnath, K.R. [Electric Power Research Inst., Palo Alto, CA (United States); Kumana, J.D. [Linnhoff March, Inc., Houston, TX (United States); Shah, J.V. [Electric Power Research Inst., Pittsburgh, PA (United States). Chemicals and Petroleum Center

    1996-12-31T23:59:59.000Z

    What are the standards for improving energy efficiency for industries such as petroleum refining, chemicals, and glass manufacture? How can different industries in emerging markets and developing accelerate the pace of improvements? This paper discusses several case studies and experiences relating to this subject emphasizing the use of energy efficiency benchmarks. Two important benchmarks are discussed. The first is based on a track record of outstanding performers in the related industry segment; the second benchmark is based on site specific factors. Using energy use reduction targets or benchmarks, projects have been implemented in Mexico, Poland, India, Venezuela, Brazil, China, Thailand, Malaysia, Republic of South Africa and Russia. Improvements identified through these projects include a variety of recommendations. The use of oxy-fuel and electric furnaces in the glass industry in Poland; reconfiguration of process heat recovery systems for refineries in China, Malaysia, and Russia; recycling and reuse of process wastewater in Republic of South Africa; cogeneration plant in Venezuela. The paper will discuss three case studies of efforts undertaken in emerging market countries to improve energy efficiency.

  19. Optimization of Industrial Refrigeration Systems

    E-Print Network [OSTI]

    Flack, P. J.; Sharp, M. K.; Case, M. E.; Gregory, R. W.; Case, P. L.

    A computer program designed to optimize the size of an evaporative condenser in a two-stage industrial refrigeration plant was created. The program sizes both the high-stage and low-stage compressors and an evaporative condenser. Once the initial...

  20. Shale Play Industry Transportation Challenges,

    E-Print Network [OSTI]

    Minnesota, University of

    ­ High volume commodi-es flows in and out of shale plays · Sand In....Oil in excess of 50 MMT/Yr. · Life of current Shale Oil & Gas explora-on trend ­ 2012) #12;Shale Play Oil Industry A Look at the Baaken · 2-3 Unit Trains

  1. Photovoltaic industry progress through 1984

    SciTech Connect (OSTI)

    Watts, R.L.; Smith, S.A.; Dirks, J.A.

    1985-04-01T23:59:59.000Z

    The growth of the US photovoltaics (PV) industry over the past decade has been impressive. First designed to provide power for satellites using high-cost production techniques, PV is now the economical choice in many remote terrestrial applications. The remarkable growth of PV in terms of quality of cells and modules, production techniques, and system design, was initiated by a cooperative effort of the US Government and the domestic PV manufacturers. European and Japanese firms entered the PV industry later, but are also growing rapidy. The Europeans continue to supply PV systems for village electrification and water pumping to many Third World countries. The Japanese have been developing the amorphous silicon (A-Si) technology by expanding its use in consumer goods. The world PV industry saw dramatic changes in industry ownership and in the emphasis on developing new and improved technology during 1984. The objective of this report is to present information on the developments of the world PV industry and focuses on developments occurring in 1984. Information is presented on a regional basis (US, Europe, Japan, other) to avoid disclosing company-confidential data. All information was gleaned from several sources, including a review of the technical literature and direct contacts with PV manufacturers. Prior to publishing the regional totals, all numbers were compared with those of other sources. The information contained in this report is prepared for use by the Department of Energy for their use in long-term R and D planning. However, this information should also be of interest by PV manufacturers and to those who may be contemplating entering the PV market. PV shipments for 1984, government supports for PV, and various PV market sectors are discussed.

  2. Identification of civil structural parameters using the extended Kalman filter

    E-Print Network [OSTI]

    Foun, Kevin

    2010-01-01T23:59:59.000Z

    In the context of civil and industrial structures, structural control and damage detection have recently become an area of great interest. The safety of a structure is always the most important issue for structural engineers, ...

  3. industrial & systems (ISE) Industrial and Systems Engineers use engineering and business principles

    E-Print Network [OSTI]

    Rohs, Remo

    to linear programming; transportation and assignment problems; dynamic program- ming; deterministic to programing, software and multimedia. USC's undergraduate ISE curriculum prepares students for industry. Programs Available · Industrial and Systems Engineering Bachelor of Science 129 units · Industrial

  4. Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry

    E-Print Network [OSTI]

    Sheridan, Jennifer

    1 Report Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry Thursday, October 6, 2011 Room 221 · Fluno Center · 601 University Avenue · Madison · WI industry through supply chain management, public policies and innovative technologies to help

  5. Energy Analysis and Diagnostics Data Analysis From Industrial Energy Assessments for Manufacturing Industries

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Plummer, R. W.; Srinath, S.; Meffe, C. M.; Ipe, J. J.; Veena, R.

    . The data shows the types of industries in our geographical area which have benefited from the industrial assessments and outlines the relationships between these industry types and variables such as energy consumption, types of recommendations, sales, plant...

  6. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    A.T, 2001: Prospects for biogas harvesting at Sungunn WongseRenewables Biomass, Biogas, PV, Wind turbines, Hydropowermill, fluidized bed kiln Biogas, Biomass Cullet preheating

  7. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Note: Biomass energy included Source: Price et al. , 2006.Note: Biomass energy included Source: Price et al. (2006).

  8. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    incineration and the demand for fossil fuels. In Japan, useincineration and the demand for fossil fuels. In Brazil,

  9. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    competitiveness in the EU emissions trading scheme: Optionson NO x and CO 2 emissions trading. Emissions Trader -Economy. DTI, 2005: EU Emissions trading scheme: Benchmark

  10. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    driven systems; high efficiency boilers and process heaters;aims to develop boilers with an efficiency of 94%. However,much lower. Efficiency measures exist for both boilers and

  11. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    14 pp. IEA, 2006c: World Energy Outlook 2006. Internationalan extrapolation of its World Energy Outlook 2005 ReferenceCO 2 gases The IEA’s World Energy Outlook 2006 (IEA, 2006c)

  12. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    about 1.2% of world energy consumption and is responsible7.2: Design energy consumption trends in world ammonia

  13. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    for carbon capture and storage technologies. Annual Reviewof carbon capture and storage (CCS) technology offers aCarbon dioxide Capture and Storage (CCS), including oxy-fuel combustion21 Process-specific technologies

  14. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    20 about 20 about 20 CCS Potential (tCO 2 /t) Mitigationstream, which is a potential candidate for CCS technology.reduces the potential for applying CCS technology. Chlorine

  15. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Schleich, J. , 2004: Do energy audits help reduce barriersof organizational barriers. Energy audit and managementa; US EPA, n.d. ). Energy Audits and Management Systems.

  16. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    energy-efficiency investments can be planned and implemented. There are also voluntary agreements covering process emissions in Australia,

  17. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Emission reduction at Engen refinery in South Durban. Paperenergy consumed in refineries and other energy conversionCement Membrane separation Refinery gas Natural gas Bio-

  18. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Air bottoming cycle Black liquor gasification combined cycleCEPI, 2001), and that use continues to grow. Black liquorgasification: Black liquor is the residue from chemical

  19. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    2002: Profiles in SMEs and SME Issues, 1990-2000. Asia-Energy management practices in SME- Case study of bakery incountries. Integrating SME development strategy into the

  20. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Europe Former Soviet Union Developing Asia Latin America Sub-Saharan Africa Middle East & North Africa World B2 Scenario Note: Biomass

  1. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    and fuel used in the primary smelter. PFC emission includedto current state-of-the art smelter electricity use and 50%commonly been connected to smelter retrofit, conversion, or

  2. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    2006: Supply-side energy efficiency and fossil fuel switch.use, from non-energy uses of fossil fuels and from non-emissions from non-energy uses of fossil fuels and from non-

  3. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    7.2: Design energy consumption trends in world ammoniagoes up: Recent trends in China’s Energy Consumption. Energy

  4. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    communication to the UN Framework Convention on Climate Change.Communications - Report by the Secretariat. UN Framework Convention on Climate Change.

  5. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Energy efficiency and energy awareness in Botswana; ESI,attitudes towards and awareness of energy efficiency; •limited awareness of the availability of energy-saving and

  6. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    both emis- sions from incineration and the demand for fossilyr (Okazaki et al. , 2004). Incineration of wastes (e.g. ,by reducing emissions from incineration and the demand for

  7. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Eidt, B. , 2004: Cogeneration opportunities - Global EnergyP.R.K. , 2003: Sugar cogeneration for power challenges andnewsletter in sugar and cogeneration. STAPPA/ALAPCO, 1999:

  8. Industrial

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFP »summerlectures [ICO]default Sign In About |

  9. Industrial

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook link to04948 Site Map6871

  10. Industrial

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook link to04948 Site

  11. Tools to Boost Steam System Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program steam software tools can help industrial plants identify steam system improvements to save energy and money.

  12. Extended Emission of Short Gamma-Ray Bursts

    E-Print Network [OSTI]

    Lin Lin; En-Wei Liang; Bin-Bin Zhang; Shuang Nan Zhang

    2008-09-10T23:59:59.000Z

    Preliminary results of our analysis on the extended emission of short/medium duration GRBs observed with Swift/BAT are presented. The Bayesian blocks algorithm is used to analyze the burst durations and the temporal structure of the lightcurves in different energy bands. We show here the results of three bursts (GRBs 050724, 061006 and 070714B) that have a prominent soft extended emission component in our sample. The extended emission of these bursts is a continuous, flickering-liked component, lasting $\\sim 100$ seconds post the GRB trigger at 15-25 keV bands. Without considering this component, the three bursts are classified as short GRBs, with $T_{90}=2\\sim 3$ seconds. GRB 060614 has an emission component similar to the extended emission, but this component has pulse-liked structure, possibly indicating that this emission component is different from that observed in GRBs 050724, 061006, and 070714B. Further analysis on the spectral evolution behavior of the extended emission component is on going.

  13. Oklahoma Industrial Energy Management Program 

    E-Print Network [OSTI]

    Estes, C. B.; Turner, W. C.

    1980-01-01T23:59:59.000Z

    usage continues to rise. With this informa tion, Oklahoma embarked upon a program to help indus try (particularly small to medium sized ones) meet the challenge. Program Objectives The primary objective of the program can be stated simply as: "To... for the country and necessary for her to be competitive in the International marketplace. PROGRAM DESCRIPTION The first step was to develop a symbol that year tenure of the.program. The conferences have concentrated on the industrialized areas of Tulsa...

  14. The Industry Viewpoint Mike Shepherd

    E-Print Network [OSTI]

    Leeds, University of

    1 UK WIR MTU2 The Industry Viewpoint Mike Shepherd Client Manager ­ Distribution and Streetworks UK in Hampstead 1851 #12;3 UK WIR Where are we now? UK WIR MAINS AND SEWERS #12;4 UK WIR FIBRE OPTICS UK WIR GAS companies dig 500,000 holes/yr · Gas, electricity and telecoms dig 250,000/yr each · Many jobs take longer

  15. Electrotechnologies and Industrial Pollution Control 

    E-Print Network [OSTI]

    Schmidt, P. S.

    1990-01-01T23:59:59.000Z

    content, and nonferrfms industrial efficiency and productivity has been cited in reverb melting furnaces produce high percentage~ of a number of publications [1-4]; these benefits continue metal oxides. These pollutants are greatly reduced in to drive... or in furnaces are capable of heat treating metals in vacu~m, development and which could be of value to low oxygen, or inert atmospheres, and operate witH no manufacturers in meeting productivity and exhaust gases. Thus, metal oxide formationl...

  16. Biomonitoring for the photovoltaics industry

    SciTech Connect (OSTI)

    Bernholc, N.M.; Moskowitz, P.D.

    1995-07-01T23:59:59.000Z

    Biomonitoring often is used as a method for estimating the dose to an individual. Therefore, a parameter of measurement, or biomarkers must be identified. The purpose of this paper is to give an overview of biomonitoring protocols for metals used in the photovoltaics industry. Special attention is given to areas that often are skimmed over, to gain insights into some of the problems that may arise when these tasks are carried out. Biological monitoring can be used to determine current human exposures to chemicals, as well as to detect past exposures, and the effects that these exposures may have on human health. It is used in conjunction with environmental monitoring to describe more completely worker`s exposures to, and absorption of, chemicals in the workplace. Biological specimens (e.g., blood, hair or urine) are analyzed for chemical agents, metabolites, or for some specific effect on the person (Lowry 1994). Biomonitoring can assess a workers exposure to industrial chemicals by all routes including skin absorption and ingestion. Although the methodology still is in its infancy, in cases where the procedures have been developed, it can be an invaluable component of an ongoing program of industrial hygiene monitoring. Like any technology, there are limitations to its effectiveness because of a lack of knowledge, contamination of specimens, and the introduction of errors.

  17. Energy Matters: Industrial Energy Efficiency | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Dr. Kathleen Hogan to Host Live Chat on Industrial Energy Efficiency LiveChat Wed, 1116, 2 pm ET: Industrial Energy Efficiency VIDEO: Who Was the Better Inventor, Tesla or Edison?...

  18. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01T23:59:59.000Z

    Voluntary Agreements for Energy Efficiency or GHG EmissionsACEEE Summer Study on Energy Efficiency in Industry, WestStandard for Industrial Energy Efficiency A. McKane 1 , R.

  19. Energy Programs of the Texas Industrial Commission 

    E-Print Network [OSTI]

    Heare, J.; dePlante, L. E.

    1979-01-01T23:59:59.000Z

    workshops and seminars; an annual Industrial Energy Technology Conference; the coordination of a university program for the training of industrial energy auditors; and organizational assistance in the establishment of regional energy conservation groups...

  20. 2008 Industrial Technologies Market Report, May 2009

    SciTech Connect (OSTI)

    Energetics; DOE

    2009-07-01T23:59:59.000Z

    The industrial sector is a critical component of the U.S. economy, providing an array of consumer, transportation, and national defense-related goods we rely on every day. Unlike many other economic sectors, however, the industrial sector must compete globally for raw materials, production, and sales. Though our homes, stores, hospitals, and vehicles are located within our borders, elements of our goods-producing industries could potentially be moved offshore. Keeping U.S. industry competitive is essential to maintaining and growing the U.S. economy. This report begins with an overview of trends in industrial sector energy use. The next section of the report focuses on some of the largest and most energy-intensive industrial subsectors. The report also highlights several emerging technologies that could transform key segments of industry. Finally, the report presents policies, incentives, and drivers that can influence the competitiveness of U.S. industrial firms.

  1. General overview of the Nigerian construction industry

    E-Print Network [OSTI]

    Dantata, Sanusi (Sanusi A.)

    2008-01-01T23:59:59.000Z

    The purpose of this study is to investigate and provide a general overview of the Nigerian construction industry, its role in the national economy, the main participants in the industry, the problems that they face, and ...

  2. The State of the Industrial Compressor Market

    E-Print Network [OSTI]

    Perry, W.

    The industrial compressor industry in the United States has been operating in a textbook example of a mature market. No truly new compressor technology has been introduced in the past thirty years and there is none on the horizon. Competitive...

  3. Qualified Target Industry Tax Refund (Florida)

    Broader source: Energy.gov [DOE]

    The Qualified Target Industry Tax Refund incentive is available for companies that create high wage jobs in targeted high value-added industries. The incentive refunds up to $3,000 per new full...

  4. New or Expanding Industries Tax Credit (Montana)

    Broader source: Energy.gov [DOE]

    Under the New or Expanding Industries Tax Credit, property used by certain new or expanding industries is eligible for reduced taxable valuation (up to 50% of their taxable value for the first 5...

  5. A New Approach to Industrial Air Conditioning

    E-Print Network [OSTI]

    Gravenstreter, T.

    1982-01-01T23:59:59.000Z

    -dryer Systems Division, has marketed industrial drying machinery. These heat reactivated dryers can handle latent loads in industrial air conditioning systems. Through waste heat conservation, air conditioning costs can be reduced 25 to 50%, with applications...

  6. FINLAND SOURCES 2007 -Forest industry production Authorities

    E-Print Network [OSTI]

    FINLAND SOURCES 2007 - Forest industry production Print Home Finland Government Authorities Local » Turnover » Profit » Energy Year 2006 » Shipping Business services Infrastructure Economy Education strategy of the EU's Forest-Based Industries Technology Platform provides a good basis for preparing

  7. Energy Programs of the Texas Industrial Commission

    E-Print Network [OSTI]

    Heare, J.; dePlante, L. E.

    1979-01-01T23:59:59.000Z

    The objectives of the Industrial Energy Conservation Program are to assist Texas industry in using energy more efficiently through seminars, workshops, technical information exchange and other supportive programs with the goal of conserving at least...

  8. UNDERGRADUATE DEGREES Industrial and Systems Engineering

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    control, information technologies, and electronics and solar power assembly and reliability. Students solving. Students delve into systems modeling and simulation, systems design and the simplificationUNDERGRADUATE DEGREES Industrial and Systems Engineering The Bachelor's Degree in Industrial

  9. Partnering with Industry to Develop Advanced Biofuels

    Broader source: Energy.gov [DOE]

    Breakout Session IA—Conversion Technologies I: Industrial Perspectives on Pathways to Advanced Biofuels Partnering with Industry to Develop Advanced Biofuels David C. Carroll, President and Chief Executive Officer, Gas Technology Institute

  10. Daylighting Application and Effectiveness in Industrial Facilities 

    E-Print Network [OSTI]

    McCowan, B.; Birleanu, D.

    2005-01-01T23:59:59.000Z

    artificial lighting became available, most older industrial buildings had their daylighting features boarded over. With modern glazing systems and sophisticated designs that minimize glare issues, daylighting for industrial buildings is making a strong...

  11. Practical Procedures for Auditing Industrial Boiler Plants

    E-Print Network [OSTI]

    O'Neil, J. P.

    1980-01-01T23:59:59.000Z

    Industrial boiler plants are an area of opportunity in virtually every industry to save energy and reduce costs by using relatively simple, inexpensive auditing procedures. An energy audit consists of inspection, measurement, analysis...

  12. Scottish Energy Research Academy Energy Industry Doctorates

    E-Print Network [OSTI]

    Painter, Kevin

    Scottish Energy Research Academy (SERA) Energy Industry Doctorates in Renewable Energy Technologies for Guidance 1. Introduction The Energy Technology Partnership (ETP) has established an Energy Industry · Energy conversion and storage · Energy materials · Grid and networks · Energy utilisation in buildings

  13. Renewble energy industry. Joint hearing before the Committee on Energy and Commerce and the Committee on Small Business and the Committee on Education and Labor, House of Representatives, Ninety-Eighth Congress, First Session, June 28, 1983

    SciTech Connect (OSTI)

    Not Available

    1983-01-01T23:59:59.000Z

    Sixteen witnesses from the solar and other renewable energy industries as well as representatives of the homebuilding industry, lobbyists, and members of Congress testified at a joint hearing on the status and problems of the solar industry. The witnesses were asked to address the need for extending business and renewable tax credits beyond the expiration date and other ways to promote the industry, which has experienced less growth than expected. Despite budget cuts in federal programs, the solar industry has outpaced the economy. Material submitted by other organizations and individuals for the record follows the testimony.

  14. The Texas Industrial Energy Conservation Program 

    E-Print Network [OSTI]

    Waldrop, T.

    1982-01-01T23:59:59.000Z

    cesses listed. Chart1-lndustrial Target Groups SIC CODE INDUSTRY 201 Meat Products 204 Feed and Grain 207 Fats and Oils 26 Paper and Allied Products 28 Chemicals and Allied Products 30 Rubber and Plastics 33 Primary Metals 34 Fabricated Metals... industry seminars. In the preparation of workbooks for industrial processes, a screening of engineering firms was 763 ESL-IE-82-04-139 Proceedings from the Fourth Industrial Energy Technology Conference, Houston, TX, April 4-7, 1982 conducted in order...

  15. Guiding Principles for Successfully Implementing Industrial Energy...

    Energy Savers [EERE]

    Assessment Recommendations Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations This implementation guide provides key principles and...

  16. Guidelines for Estimating Unmetered Industrial Water Use

    SciTech Connect (OSTI)

    Boyd, Brian K.

    2010-08-01T23:59:59.000Z

    The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

  17. Industrial Distributed Energy: Combined Heat & Power

    Office of Energy Efficiency and Renewable Energy (EERE)

    Information about the Department of Energy’s Industrial Technologies Program and its Combined Heat and Power program.

  18. Industrial Scale Demonstration of Smart Manufacturing Achieving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains Industrial Scale Demonstration of Smart Manufacturing Achieving...

  19. Green Industrial Policy: Trade and Theory

    E-Print Network [OSTI]

    Karp, Larry; Stevenson, Megan

    2012-01-01T23:59:59.000Z

    and solar panels, and the renewables industry employs well over a million workers (NYT Bradsher, The opportunity cost

  20. Initial conditions for anisotropic extended-type inflationary universes

    SciTech Connect (OSTI)

    del Campo, S. (Instituto de Fisica, Universidad Catolica de Valparaiso, Avenida Brasil 2950, Valparaiso (Chile))

    1992-05-15T23:59:59.000Z

    Recently, extended-type inflationary universe models have been proposed as an appealing approach for solving most of the cosmological puzzles'' that, in contrast with previous models, do not require a fine-tuning'' for the microphysical parameters present in the effective potential. These scenarios rest on a Brans-Dicke-type theory, where a nonminimal coupling of the form {ital f}({ital cphi}){ital R} is assumed, and it may or may not include a potential for the Brans-Dicke field. In its classical description, different extended inflationary universe scenarios are described, where anisotropy is taken into account. By using the Hartle-Hawking and the Vilenkin boundary conditions for the wave function of the Universe, the probability distributions for the initial states of these extended models in the case of a small anisotropy are determined and discussed.

  1. Industrial Robotics Prof. Alessandro De Luca

    E-Print Network [OSTI]

    De Luca, Alessandro

    Robotics 1 Industrial Robotics Prof. Alessandro De Luca Robotics 1 1 #12;What is a robot? ! industrial definition (RIA = Robotic Institute of America) re-programmable multi-functional manipulator;Evolution toward industrial robots ! with respect to the ancestors ! flexibility of use ! adaptability

  2. Missouri Industrial Assessment Center College of Engineering

    E-Print Network [OSTI]

    Noble, James S.

    , education, outreach and industrial energy audit. The audit is completely free, with summary recommendationMissouri Industrial Assessment Center College of Engineering University of Missouri-Columbia #12;Mo Department of Energy's requirement, the ultimate goal of Missouri Industrial Assessment Center is to be "the

  3. Pulp & Paper Industry- A Strategic Energy Review

    E-Print Network [OSTI]

    Stapley, C. E.

    The pulp and paper industry with yearly energy purchases of $5 billion per year including 50 billion kWh of power is one of the largest industrial energy producers in the U.S. However, structural changes in the global pulp and paper industry could...

  4. Sustainability the forest and paper industry

    E-Print Network [OSTI]

    Sustainability the forest and paper industry ­ on its way to sustainability http Sustainable Forestry Practices In Tune with the Environment The Forest and Paper Industry's Energy Profile 2 3 5 7 9 12 #12;1 Sustainability 10 Years after Rio The Forest and Paper Industry's Messages

  5. Sustainability the forest and paper industry

    E-Print Network [OSTI]

    Sustainability the forest and paper industry ­ on its way to sustainability #12;Contents Introduction The Forest and Paper Industry's Economic Profile A Key Social Actor Sustainable Forestry Practices;1 Sustainability 10 Years after Rio The Forest and Paper Industry's Messages Sustainability has become an essential

  6. UW Computer Science & Engineering Industrial Affiliates Program

    E-Print Network [OSTI]

    Anderson, Richard

    UW Computer Science & Engineering Industrial Affiliates Program 2011-12 Contributions for the CSE Industrial Affiliates Program are to be used to further the Computer Science & Engineering program with this completed form to: Kay Beck-Benton Industrial Affiliates Program University of Washington Computer Science

  7. Montana State University 1 Industrial Engineering

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Montana State University 1 Industrial Engineering The mission of the undergraduate program in Industrial Engineering (IE) is to produce graduates well grounded in both classical and current industrial engineering knowledge and skills consistent with the land-grant mission of MSU. Graduates

  8. UW Computer Science & Engineering Industry Affiliates Program

    E-Print Network [OSTI]

    Borenstein, Elhanan

    UW Computer Science & Engineering Industry Affiliates Program 2013-14 Contributions for the CSE Industry Affiliates Program are to be used to further the Computer Science & Engineering program-Benton Industrial Affiliates Program University of Washington Computer Science & Engineering Box 352350 Seattle, WA

  9. DYNAMIC WORKCELL FOR INDUSTRIAL ROBOTS A Dissertation

    E-Print Network [OSTI]

    Hoover, Adam

    DYNAMIC WORKCELL FOR INDUSTRIAL ROBOTS A Dissertation Presented to the Graduate School of Clemson: This dissertation entitled "Dynamic Workcell for Industrial Robots" and written by Yanfei Liu is presented present a novel approach to workcell design for enhanced per- formance of industrial robot manipulators

  10. OVERVIEW OF MUNICIPAL AND INDUSTRIAL LAND APPLICATION

    E-Print Network [OSTI]

    Balser, Teri C.

    biosolids NR 214 ­ Industrial by-products NR 518 ­ Solid waste SITES MUST BE APPROVED AND PERMITTED PRIOR,000 80,000 Biosolids 210,000 70,000 Industrial wastes 1,146,000 345,000 Solid waste na na Source: Fred on material Biosolids: 25 % of organic-N + 100% of NH4-N. Second and third year credits Industrial

  11. Methods for extending the storage life of fresh beef

    E-Print Network [OSTI]

    Motycka, Robert Ray

    1973-01-01T23:59:59.000Z

    MI'I", !ODS }' OR Eg"' ' ll Ii&': TOP 4 Thesis ROBFRT RAY MOTYCX. . ", Submitted to the Graduate College of Texas A&N Universi. ty i. n partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1973 Major Subject...: Neat Science METHODS FOR EXTENDING THE STORAGE LIFE OF FRESH BEEF A Thesis by ROBERT RAY MOTYCKA Approved as to style and content by: (Co-Chairman df Conmrfttee) /y (Head of Depart ent) (Member) December 1973 ABSTRACT Methods for Extending...

  12. Solid low level waste forms and extended storage

    SciTech Connect (OSTI)

    Kohout, R. [R. Kohout & Associates, Ltd., Toronto, Ontario (Canada)

    1995-11-01T23:59:59.000Z

    This paper presents regulatory, technical, and economic aspects of selecting solid waste forms for the extended on-site storage of power plant low level wastes (LLW) in the United States. The author explains current uncertainties and disposal site shortages, defines power plant waste types, addresses regulatory requirements for disposal, discusses basic waste form storage considerations, outlines possible strategies for the management of individual waste types, and offers methodological steps for selecting a waste form for extended storage. Broader issues closely associated with waste form selection are also presented.

  13. Environmental Protection- Industrial Compliance (Newfoundland and Labrador, Canada)

    Broader source: Energy.gov [DOE]

    The Industrial Compliance Section develops and administers Certificates of Approval for the Construction and/or Operation of various industrial facilities. Industries with air emissions and/or...

  14. Business Opportunities in the Energy Industry | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Business Opportunities in the Energy Industry Business Opportunities in the Energy Industry An opportunity for small businesses to network with industry professionals, sponsored by...

  15. ITP Petroleum Refining: Profile of the Petroleum Refining Industry...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Profile of the Petroleum Refining Industry in California: California Industries of the Future Program ITP Petroleum Refining: Profile of the Petroleum Refining Industry in...

  16. Cooling, Heating, and Power for Industry: A Market Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry: A Market Assessment, August 2003 Cooling, Heating, and Power for Industry: A Market Assessment, August 2003 Industrial applications of CHP have been around for decades,...

  17. Local Option- Industrial Facilities and Development Bonds (Utah)

    Broader source: Energy.gov [DOE]

    Under the Utah Industrial Facilities and Development Act, counties, municipalities, and state universities in Utah may issue Industrial Revenue Bonds (IRBs) or Industrial Development Bonds (IDBs)...

  18. Spirits of Capitalism: Explaining Industrial Variation in South Asia

    E-Print Network [OSTI]

    Naseemullah, Adnan

    2010-01-01T23:59:59.000Z

    1966). “Indian Automotive Industry: Opportunities andin Pakistan’s Automotive Industry. ” Journal of Asia Pacificin Pakistan’s Automotive Industry”, Journal of Asia Pacific

  19. Real-Time Neutron Radiography - Applications For The Automotive Industry

    E-Print Network [OSTI]

    Richards, Wade J; Tuttle, Michael J; Ulowetz, Kirsten; Mcgee, Robert

    2003-01-01T23:59:59.000Z

    Applications For The Automotive Industry Wade J. Richardstechniques for the automotive industry is not new 5 . Theused to assist the automotive industry in new and creative

  20. Energy and Environmental Challenges for the Japanese Automotive Industry

    E-Print Network [OSTI]

    Sperling, Daniel

    2000-01-01T23:59:59.000Z

    for the Japanese Automotive Industry UCD-ITS-RR-00-05 Danieland uncertainty for the automotive industry. The industryissues facing the automotive industry are regulation of

  1. Department of Energy Wind Vision: An Industry Preview | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Wind Vision: An Industry Preview Department of Energy Wind Vision: An Industry Preview The "Department of Energy Wind Vision: An Industry Preview,"...

  2. Organizing Global Knowledge Networks in the Electronics Industry

    E-Print Network [OSTI]

    Dedrick, Jason; Kraemer, Kenneth L; Linden, Greg; Brown, Claire; Murtha, Tom

    2007-01-01T23:59:59.000Z

    Knowledge Networks in the Electronics Industry 1 Jasonusing studies from the electronics industry. We examine theanalysis to the overall electronics industry to illustrate

  3. Challenges Facing the Green Industry The floriculture, nursery and landscape industries,

    E-Print Network [OSTI]

    and environmental issues. Extension's Response Designed for both industry and consumers, a web- based seminar

  4. Graduate Programs in Industrial and Manufacturing Engineering The industrial and manufacturing (IME) department at WSU

    E-Print Network [OSTI]

    ; occupational safety and other industrial hygiene issues; and ergonomics and human factors issues in aviationGraduate Programs in Industrial and Manufacturing Engineering The industrial and manufacturing (IME programs in industrial engineering (MSIE and PhDIE, respectively). The department also offers four graduate

  5. MECHANICAL AND INDUSTRIAL ENGINEERING INDUSTRIAL ADVISORY BOARD WEDNESDAY, APRIL 23, 2014

    E-Print Network [OSTI]

    Mountziaris, T. J.

    MECHANICAL AND INDUSTRIAL ENGINEERING INDUSTRIAL ADVISORY BOARD WEDNESDAY, APRIL 23, 2014 MEETING AGENDA MECHANICAL AND INDUSTRIAL ENGINEERING MIE CONFERENCE ROOM (ELAB) UNIVERSITY OF MASSACHUSETTS AMHERST, MA 9:00 a.m. State of the MIE Industrial Advisory Board Dave Anderson & · Minutes from October

  6. Glass needs for a growing photovoltaics industry

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Burrows, Keith; Fthenakis, Vasilis

    2015-01-01T23:59:59.000Z

    With the projected growth in photovoltaics, the demand for glass for the solar industry will far exceed the current supply, and thousands of new float-glass plants will have to be built to meet its needs over the next 20 years. Such expansion will provide an opportunity for the solar industry to obtain products better suited to their needs, such as low-iron glass and borosilicate glass at the lowest possible price. While there are no significant technological hurdles that would prevent the flat glass industry from meeting the solar industry’s projected needs, to do so will require advance planning and substantialmore »investments.« less

  7. HTGR Industrial Application Functional and Operational Requirements

    SciTech Connect (OSTI)

    L. E. Demick

    2010-08-01T23:59:59.000Z

    This document specifies the functional and performance requirements to be used in the development of the conceptual design of a high temperature gas-cooled reactor (HTGR) based plant supplying energy to a typical industrial facility. These requirements were developed from collaboration with industry and HTGR suppliers over the preceding three years to identify the energy needs of industrial processes for which the HTGR technology is technically and economically viable. The functional and performance requirements specified herein are an effective representation of the industrial sector energy needs and an effective basis for developing a conceptual design of the plant that will serve the broadest range of industrial applications.

  8. Glass needs for a growing photovoltaics industry

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Burrows, Keith [Columbia Univ., New York, NY (United States); Fthenakis, Vasilis [Columbia Univ., New York, NY (United States); Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-01-01T23:59:59.000Z

    With the projected growth in photovoltaics, the demand for glass for the solar industry will far exceed the current supply, and thousands of new float-glass plants will have to be built to meet its needs over the next 20 years. Such expansion will provide an opportunity for the solar industry to obtain products better suited to their needs, such as low-iron glass and borosilicate glass at the lowest possible price. While there are no significant technological hurdles that would prevent the flat glass industry from meeting the solar industry’s projected needs, to do so will require advance planning and substantial investments.

  9. Annual energy outlook 2006 with projections to 2030

    SciTech Connect (OSTI)

    NONE

    2006-02-15T23:59:59.000Z

    The Annual Energy Outlook 2006 (AEO2006), prepared by the Energy Information Administration (EIA), presents long-term forecasts of energy supply, demand, and prices through 2030. The projections are based on results from EIA's National Energy Modeling System (NEMS). The report begins with an 'Overview' summarizing the AEO2006 reference case and comparing it with the AEO2005 reference case. The next section, 'Legislation and Regulations', discusses evolving legislation and regulatory issues, including recently enacted legislation and regulation, such as the Energy Policy Act of 2005, and some that are proposed. 'Issues in Focus' includes a discussion of the basis of EIA's substantial revision of the world oil price trend used in the projections. Other topics examined include: energy technologies on the cusp of being introduced; mercury emissions control technologies; and U.S. greenhouse gas intensity. 'Issues in Focus' is followed by 'Energy Market Trends', which provides a summary of the AEO2006 projections for energy markets. The analysis in AEO2006 focuses primarily on a reference case, lower and higher economic growth cases, and lower and higher energy price cases. In addition, more than 30 alternative cases are included in AEO2006. Complete tables for the five primary cases are provided in Appendixes A through C. Major results from many of the alternative cases are provided in Appendix D. Appendix E briefly describes NEMS and the alternatives cases. 112 figs., 25 tabs., 7 apps.

  10. Voice Quality Evaluation for Wireless Transmission with ROHC (extended version

    E-Print Network [OSTI]

    Reisslein, Martin

    (reduction in header and total packet size), the voice quality, and the delay jitter. Importantly, we employ1 Voice Quality Evaluation for Wireless Transmission with ROHC (extended version and software code encoded voice with ROHC over a wireless link. We first present a tutorial on voice quality evaluation. We

  11. Parametrization of extended Gaussian disorder models from microscopic charge transport

    E-Print Network [OSTI]

    Schmidt, Volker

    -size effects at small charge densities, the data is fitted to the uncorrelated and correlated extended Gaussian to compound synthesis. 1 Introduction The optimization of organic photovoltaic cells,1,2 light emitting diodes,3 and field effect tran- sistors4 requires the improvement of the charge-carrier mobility, µ

  12. On extendability of group actions on compact Riemann surfaces

    E-Print Network [OSTI]

    Conder, Marston

    of such groups. The associated signatures appear in Table 1 below, the #12;rst eight corresponding to normalOn extendability of group actions on compact Riemann surfaces E. Bujalance #3; , F.J. Cirre y , M.D.E. Conder z 28 September 2001 Abstract The question of whether a given group G which acts faithfully

  13. Extended RDF as a Semantic Foundation of Rule Markup Languages

    E-Print Network [OSTI]

    Analyti, Anastasia; Damásio, Carlos Viegas; Wagner, Gerd; 10.1613/jair.2425

    2011-01-01T23:59:59.000Z

    Ontologies and automated reasoning are the building blocks of the Semantic Web initiative. Derivation rules can be included in an ontology to define derived concepts, based on base concepts. For example, rules allow to define the extension of a class or property, based on a complex relation between the extensions of the same or other classes and properties. On the other hand, the inclusion of negative information both in the form of negation-as-failure and explicit negative information is also needed to enable various forms of reasoning. In this paper, we extend RDF graphs with weak and strong negation, as well as derivation rules. The ERDF stable model semantics of the extended framework (Extended RDF) is defined, extending RDF(S) semantics. A distinctive feature of our theory, which is based on Partial Logic, is that both truth and falsity extensions of properties and classes are considered, allowing for truth value gaps. Our framework supports both closed-world and open-world reasoning through the explicit...

  14. New Blind Signatures Equivalent to Factorization (Extended Abstract)

    E-Print Network [OSTI]

    Pointcheval, David

    New Blind Signatures Equivalent to Factorization (Extended Abstract) David Pointcheval Jacques Stern Abstract In this paper, we present new blind signature schemes based on the factorization problem. They are the first blind sig- nature schemes proved secure relatively to factorization. By security, we mean

  15. Optimal Fractal Coding is NP-Hard1 (Extended Abstract)

    E-Print Network [OSTI]

    Reiterer, Harald

    Optimal Fractal Coding is NP-Hard1 (Extended Abstract) Matthias Ruhl, Hannes Hartenstein Institut f,hartenst@informatik.uni-freiburg.de Abstract In fractal compression a signal is encoded by the parameters of a contractive trans- formation whose fixed point (attractor) is an approximation of the original data. Thus fractal coding can

  16. EXTENDING THE PREDICTION OF THE THERMODYNAMIC PROPERTIES OF CLAY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    EXTENDING THE PREDICTION OF THE THERMODYNAMIC PROPERTIES OF CLAY MINERALS TO THE TRAPPING OF TRACE The thermodynamic properties of clay minerals, which control the stability of these minerals in solution, are still are parameterised using a given set of minerals. For clay minerals, the latter are mainly composed by Si, Al, Fe

  17. Cyber Security via Minority Games with Epistatic Signaling (Extended Abstract)

    E-Print Network [OSTI]

    Mishra, Bud

    Cyber Security via Minority Games with Epistatic Signaling (Extended Abstract) W. Casey, L. Metcalf occurs when deceptions are employed in order to breach the security of the system, thus making the entire profiles (e.g., the distribution of players employing various kinds of vulnerability and threat predictions

  18. Optimal Storage Policies with Wind Forecast Uncertainties [Extended Abstract

    E-Print Network [OSTI]

    Dalang, Robert C.

    Optimal Storage Policies with Wind Forecast Uncertainties [Extended Abstract] Nicolas Gast EPFL, IC generation. The use of energy storage compensates to some extent these negative effects; it plays a buffer role between demand and production. We revisit a model of real storage proposed by Bejan et al.[1]. We

  19. Kalman and Extended Kalman Filters: Concept, Derivation and Properties

    E-Print Network [OSTI]

    Ribeiro,Isabel

    Kalman and Extended Kalman Filters: Concept, Derivation and Properties Maria Isabel Ribeiro for Gaussian Random Vectors . . . . . . . . . . 12 4 The Kalman Filter 14 4.1 Kalman Filter dynamics . . . . . . . . . . . . . . . . . . . . . . . 15 4.2 One-step ahead prediction dynamics . . . . . . . . . . . . . . . . 22 4.3 Kalman filter

  20. Extended Response to Weir and Smith Sven E. Wilson

    E-Print Network [OSTI]

    Martinez, Tony R.

    Extended Response to Weir and Smith Sven E. Wilson Brigham Young University Benjamin L. Howell University Phone: (801) 422-9018 Email: sven@byu.edu #12;2 Abstract Evidence provided by Weir and Smith and a variety of regression models (including that of Weir and Smith). In particular, our pooled regression

  1. Evaluation of the Technical Basis for Extended Dry Storage and

    E-Print Network [OSTI]

    -- Executive Summary U.S. Nuclear Waste Technical Review Board December 2010 #12;U.S.U.S. Nuclear Waste Technical Review Board Authors This report was prepared for the U.S. Nuclear Waste Technical Review Board.NWTRB.GOV ii #12;Extended Dry Storage and Transportation of Used Nuclear Fuel U.S. Nuclear Waste Technical

  2. Extending the analysis of the FlipIt game

    E-Print Network [OSTI]

    Rossides, Michalis

    2013-01-01T23:59:59.000Z

    In this thesis, we extend the game theoretical analysis of the FlipIt gameą. The game was first articulated and analyzed by Marten van Dijk, Ari Juels, Alina Oprea and Ronald L. Rivest. FlipIt (or otherwise The Game of ...

  3. TPA#1573154.02 Extending the Squeak Virtual Machine

    E-Print Network [OSTI]

    Ducasse, Stéphane

    TPA#1573154.02 Extending the Squeak Virtual Machine Andrew C. Greenberg NetWolves Technology not otherwise possible without an extension. Squeaking out more speed Squeak programs are not compiled to native permitting a programmer to focus energies on refining only small portions of the code. Using a Squeak

  4. Extending ballistic graphene FET lumped element models to diffusive devices

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Extending ballistic graphene FET lumped element models to diffusive devices G Vincenzi1,2 , G graphene field effect device model is presented. The model is based on the "Top-of-the-barrier" approach which is usually valid only for ballistic graphene nanotransistors. Proper modifications are introduced

  5. An extended Dirac equation in noncommutative space-time

    E-Print Network [OSTI]

    R. Vilela Mendes

    2015-02-01T23:59:59.000Z

    Stabilizing, by deformation, the algebra of relativistic quantum mechanics a non-commutative space-time geometry is obtained. The exterior algebra of this geometry leads to an extended massless Dirac equation which has both a massless and a large mass solution. The nature of the solutions is discussed, as well as the effects of coupling the two solutions.

  6. An extended Dirac equation in noncommutative space-time

    E-Print Network [OSTI]

    Mendes, R Vilela

    2015-01-01T23:59:59.000Z

    Stabilizing, by deformation, the algebra of relativistic quantum mechanics a non-commutative space-time geometry is obtained. The exterior algebra of this geometry leads to an extended massless Dirac equation which has both a massless and a large mass solution. The nature of the solutions is discussed, as well as the effects of coupling the two solutions.

  7. Browser Interfaces and Extended Validation SSL Certificates: An Empirical Study

    E-Print Network [OSTI]

    Van Oorschot, Paul

    Browser Interfaces and Extended Validation SSL Certificates: An Empirical Study Robert Biddle provided by SSL certificates and browser interfaces in the face of var- ious attacks. As one response, basic SSL server certificates are being demoted to second-class status in conjunction

  8. The Description Logic ALCN HR+ Extended with Concrete Domains

    E-Print Network [OSTI]

    Moeller, Ralf

    The Description Logic ALCN HR+ Extended with Concrete Domains: A Practically Motivated Approach, role hierarchies, transitively closed roles, generalized concept inclusions, and concrete domains. As in other languages based on concrete domains (e.g. ALC(D)) a so-called ex- istential predicate restriction

  9. The Description Logic ALCNHR + Extended with Concrete Domains

    E-Print Network [OSTI]

    Haarslev, Volker

    The Description Logic ALCNHR + Extended with Concrete Domains: A Practically Motivated Approach restrictions, role hierarchies, transitively closed roles, generalized concept inclusions, and concrete domains. As in other languages based on concrete domains (e.g. ALC(D)) a so­called ex­ istential predicate restriction

  10. Extending Plan Inference Techniques to Recognize Intentions in Information Graphics

    E-Print Network [OSTI]

    Carberry, Sandra

    Extending Plan Inference Techniques to Recognize Intentions in Information Graphics Stephanie Elzer information graphics. Our work is part of a larger project to de- velop an interactive natural language system graphics. 1 Introduction The amount of information available electronically has increased dramatically over

  11. EXTENDING THE DEFINITION OF ENTROPY TO NONEQUILIBRIUM STEADY STATES.

    E-Print Network [OSTI]

    ## of #. Our definition is based on energy exchanged, uses the microscopic dynamics of the system, and agreesEXTENDING THE DEFINITION OF ENTROPY TO NONEQUILIBRIUM STEADY STATES. by David Ruelle* Abstract. We forces # and maintained at fixed kinetic energy (Hoover­Evans isokinetic thermostat). We assume

  12. AN EXTENDED CLASS OF NONLINEAR CONJUGATE GRADIENT METHODS \\Lambda

    E-Print Network [OSTI]

    Yuan, Ya-xiang

    AN EXTENDED CLASS OF NONLINEAR CONJUGATE GRADIENT METHODS \\Lambda Y. H. Dai and Y. Yuan State Key 100080, P. R. China. Email: dyh,yyx@lsec.cc.ac.cn Abstract Conjugate gradient methods are very important be analyzed uniformly, conjugate gradient methods are often analyzed individually. Recently, Dai and Yuan

  13. Extending the Cell SPE with Energy Efficient Branch Prediction

    E-Print Network [OSTI]

    Kuzmanov, Georgi

    Extending the Cell SPE with Energy Efficient Branch Prediction Martijn Briejer1 , Cor Meenderinck1 , and Ben Juurlink2 1 Delft University of Technology, Delft, the Netherlands cor@ce.et.tudelft.nl 2 Technische Universit¨at Berlin, Berlin, Germany juurlink@cs.tu-berlin.de Abstract. Energy-efficient dynamic

  14. Critical phenomena of asymmetric nuclear matter in the extended

    E-Print Network [OSTI]

    Critical phenomena of asymmetric nuclear matter in the extended Zimanyi-Moszkowski model K nuclear matter produced by heavy-ion reactions is isospin asymmetric. Although the critical exponents. Miyazaki Abstract We have studied the liquid-gas phase transition of warm asymmetric nuclear matter

  15. On the algebraization of valuation semantics (extended abstract)

    E-Print Network [OSTI]

    Lisboa, Universidade Técnica de

    On the algebraization of valuation semantics (extended abstract) Carlos Caleiro Ricardo Gon-Tarski method. Nevertheless, many interesting logics fall out of the scope of this approach. It is the case to , that represents the valuation map. Moreover, the two-sorted signature 2 will have the operations of on sort

  16. Quasi light fields: extending the light field to coherent radiation

    E-Print Network [OSTI]

    Wornell, Gregory W.

    Quasi light fields: extending the light field to coherent radiation Anthony Accardi1,2 and Gregory light field, and for coherent radiation using electromagnetic field theory. We present a model of coherent image formation that strikes a balance between the utility of the light field

  17. EXTENDING UFDS TO PIDS WITHOUT ADDING UNITS KEITH A. KEARNES

    E-Print Network [OSTI]

    Kearnes, Keith A.

    EXTENDING UFDS TO PIDS WITHOUT ADDING UNITS KEITH A. KEARNES ABSTRACT. If U is a UFD, then there is a PID P containing U that has the same unit group as U. Moreover, P can be taken so that its field there is a PID P such that (i) P is a proper subring of the real numbers, (ii) P properly contains the ring

  18. Merging DBMs E#ciently --Extended Abstract Alexandre David 1

    E-Print Network [OSTI]

    David, Alexandre

    Merging DBMs E#ciently -- Extended Abstract Alexandre David 1 Department of Computer Science to reduce the number of DBMs in federations by merging them. Federations are unions of DBMs and are used to represent non­convex zones. Inclusion checking between DBMs is a limited technique to reduce the size

  19. Merging DBMs Efficiently Extended Abstract Alexandre David1

    E-Print Network [OSTI]

    David, Alexandre

    Merging DBMs Efficiently ­ Extended Abstract Alexandre David1 Department of Computer Science algorithms to reduce the number of DBMs in federations by merging them. Federations are unions of DBMs and are used to represent non-convex zones. Inclusion checking between DBMs is a limited technique to reduce

  20. Composting Successes and Failures Extending the Growing Season Workshop

    E-Print Network [OSTI]

    Amin, S. Massoud

    3/18/2014 1 Composting Successes and Failures Extending the Growing Season Workshop LaMoine Nickel University of MN SWROC March 12, 2014 Beginning of compost process 9/6/2013 Finished compost product 11/19/2013 What is Composting Composting is a biological process in which microorganisms convert organic

  1. CREATIVE CONCEPTUAL DESIGN: EXTENDING THE SCOPE BY INFUSED DESIGN

    E-Print Network [OSTI]

    Shai, Offer

    1 CREATIVE CONCEPTUAL DESIGN: EXTENDING THE SCOPE BY INFUSED DESIGN Offer Shai School of Mechanical infused design that guarantees generating design solutions by transforming systems and methods from remote. This process is partially supported by a computer tool. We describe the method of infused design and illustrate

  2. Western Michigan University -Extended University Programs How to Get Started

    E-Print Network [OSTI]

    de Doncker, Elise

    Western Michigan University - Extended University Programs How to Get Started Interested in takingThe first toWestern Michigan University, Office of Admissions,1903W. Michigan Ave,Kalamazoo,MI 49008Western Michigan University,Office of Admissions,1903W.Michigan Ave, Kalamazoo,MI 49008-5211;the other

  3. US Biofuels Baseline and impact of extending the

    E-Print Network [OSTI]

    Noble, James S.

    June 2011 US Biofuels Baseline and impact of extending the $0.45 ethanol blenders baseline projections for agricultural and biofuel markets.1 That baseline assumed current biofuel policy for cellulosic biofuels was assumed to expire at the end of 2012. This report compares a slightly modified

  4. Prediction Games in Infinitely Rich Worlds [Extended Abstract

    E-Print Network [OSTI]

    Madani, Omid

    Prediction Games in Infinitely Rich Worlds [Extended Abstract] Omid Madani madani prediction games may make this massive learning possible. In this paper, we describe prediction games potential of prediction games is in pointing to ways of achieving powerful large-scale learning without

  5. Rational Secret Sharing and Multiparty Computation: Extended Abstract

    E-Print Network [OSTI]

    Fiat, Amos

    Rational Secret Sharing and Multiparty Computation: Extended Abstract Joseph Halpern Department the problems of secret sharing and multiparty computation, assuming that agents prefer to get the secret (resp get it. We show that, under these assumptions, neither secret sharing nor multiparty function

  6. Location logistics of industrial facilities

    E-Print Network [OSTI]

    Hammack, William Eugene

    1981-01-01T23:59:59.000Z

    of company intent1ons is not made at the correct time and in the correct manner. 6. Recommend Best Areas for Further Invest1 ations. Once the on-site evaluations have been completed, the 11st of possibilities is reduced still further and only the best... location and site selection. This data was gathered through library research, atten- dance of various industr1al development conferences, sol1citation of mater1als from individuals currently involved with industrial facil1ties location, and various...

  7. Automating An Industrial Power Plant

    E-Print Network [OSTI]

    Williams, D. R.; McCowen, R. R.

    AUTlliATING AN INDUSTRIAL POWER PLANT DAVID R. WILLIAMS, P.E. Energy Coordi?nator John Deere Component Works Waterloo, Iowa ABSTRACT The need for an upgrade of boiler and turbine controls in the 15 MW coal-fired cogeneration plant... for the project was estimated at $860,OOO/year. The upgrading process began with a search for a design/ build contractor that could provide complete turn key capability, beginning with a site survey and ending with operator acceptanoe. The contractor...

  8. INDUST: An Industrial Data Base

    E-Print Network [OSTI]

    Wilfert, G. L.; Moore, N. L.

    .5% of the natural gas consump tion, 98.1% of the fuel oil consumption, 99.2% of the coal/coke consumption, and 99.7% of a class of fuels called "other" fuels. Within these 13 indus try groups, INDUST addresses a wide variety of energy-intense industries... the manufac turing sector, Table 1 shows the latest EIA pro visional estimate of energy consumption (in trillion Btu) for 1985. The EIA reports fuel consumption according to five categories: electricity, fuel oil, natural gas, coal and coke, and other...

  9. Industry Sponsored Research | Partnerships | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users

  10. Shrenik Industries | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCalifornia Sector:Shrenik Industries Jump to: navigation, search

  11. Ventower Industries | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCalifornia Sector:ShreniksourceVentower Industries Jump to:

  12. Jax Industries | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtelInterias SolarJane Capital Partners JumpMissouri:Java -Jax Industries

  13. Nuclear Industry Job Descriptions Boilermaker

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project TapsDOE Directives,838NuclearForensicsIndustry

  14. 2013 Average Monthly Bill- Industrial

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin:Deployment ActivitiesAge Refining Air BPA2.D

  15. Eolica Industrial | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORTEnergy OffshoreDeveloperEnertechEolica Cajueiro daIndustrial

  16. Industrial Hygiene | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook link to04948Industrial

  17. Industry Cluster Development Grant winners

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook linkProtection »SafetyIndustry

  18. Reid Industries | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation, searchRayreviewAl., 2005) |RGGIRehobeth, Alabama:Reid

  19. Office of Industrial Technologies research in progress

    SciTech Connect (OSTI)

    Not Available

    1993-05-01T23:59:59.000Z

    The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

  20. A Long, Contingent Path to Comparative Advantage: Industrial Policy and the Japanese Iron and Steel Industry, 1900-1973

    E-Print Network [OSTI]

    ELBAUM, BERNARD

    2006-01-01T23:59:59.000Z

    comparative advantage, and heavy industry, favored by moreits spending in heavy industries, including militarilylight as well as heavy industries, recommendations from both

  1. Refining and Extending the Business Model with Information Technology: Dell Computer Corporation

    E-Print Network [OSTI]

    Kraemer, Kenneth L; Dedrick, Jason; Yamashiro, Sandra

    1999-01-01T23:59:59.000Z

    of Dell’s Direct Business Model Fuels Fifteenth ConsecutiveAND EXTENDING THE REFINING AND EXTENDING THE BUSINESS MODELBUSINESS MODEL CENTER FOR RESEARCH ON INFORMATION TECHNOLOGY

  2. Industrial process heat market assessment

    SciTech Connect (OSTI)

    Bresnick, S.

    1981-12-01T23:59:59.000Z

    This report is designed to be a reference resource, giving a broad perspective of the potential HTGR market for industrial process heat. It is intended to serve as a briefing document for those wishing to obtain background information and also to serve as a starting point from which more detailed and refined studies may be undertaken. In doing so, the report presents a qualitative and quantitative description of the industrial process heat market in the US, provides a summary discussion of cogeneration experience to date, and outlines the existing institutional and financial framework for cogeneration. The intent is to give the reader an understanding of the current situation and experience in this area. The cogeneration area in particular is an evolving one because of regulations and tax laws, which are still in the process of being developed and interpreted. The report presents the latest developments in regulatory and legislative activities which are associated with that technology. Finally, the report presents a brief description of the three HTGR systems under study during the current fiscal year and describes the specific market characteristics which each application is designed to serve.

  3. Extending Qualitative Modelling for Simulation of TimeDelayed Behaviour

    E-Print Network [OSTI]

    Miguel, Ian

    industrial plants is to choose a measured variable and maintain the re­ quired value of this variable through a process of mea­ surement, comparison, and adjustment. A time delay between a disturbance in the plant applicable to simulators that enable synchronous tracking. The rest of this paper is arranged as follows

  4. Extending an Algebraic Modeling Language to Support Constraint ...

    E-Print Network [OSTI]

    4er PowerMac G4

    2001-04-02T23:59:59.000Z

    Department of Industrial Engineering and Management Sciences ..... method for seeking the best objective value over all feasible solutions. Global ...... [15] ILOG, Inc., ILOG OPL Studio 3.0 User's Manual and OPL Studio 3.0 Optimization ... In Principles and Practice of Constraint Programming — CP'99, Joxan Jaffar, ed.,.

  5. THE DEPARTMENT OF Mechanical & Industrial Engineering's graduate programs ed-

    E-Print Network [OSTI]

    Kusiak, Andrew

    THE DEPARTMENT OF Mechanical & Industrial Engineering's graduate programs ed- ucate students Mechanical and Industrial Engineering faculty members conduct research in affiliation with vari- ous College I N Industrial Engineering Department of Mechanical & Industrial Engineering 3131 Seamans Center

  6. The dynamics of supply chains in the automotive industry

    E-Print Network [OSTI]

    Braese, Niklas

    2005-01-01T23:59:59.000Z

    This thesis looks at how supply chains in the automotive industry operate from the perspective of the manufacturers. The study includes the industry structure, the top players in the industry, factors that drive the industry, ...

  7. Industrial ecology Prosperity Game{trademark}

    SciTech Connect (OSTI)

    Beck, D.; Boyack, K.; Berman, M.

    1998-03-01T23:59:59.000Z

    Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

  8. Opportunities, Barriers and Actions for Industrial Demand Response in California

    E-Print Network [OSTI]

    McKane, Aimee T.

    2009-01-01T23:59:59.000Z

    Demand Side Management Framework for Industrial Facilities provides three major areas for changing electric loads in industrial buildings:

  9. Electricity distribution industry restructuring, electrification, and competition in South Africa

    SciTech Connect (OSTI)

    Galen, P S

    1997-07-01T23:59:59.000Z

    This paper reviews the status of the South African electricity supply industry (ESI) and proposals for reorienting and restructuring it. South Africa has been intensely examining its ESI for more than 4 years in an effort to determine whether and how it should be restructured to best support the country`s new economic development and social upliftment goals. The debate has been spirited and inclusive of most ESI stakeholders. The demands on and expectations for the ESI are many and varied. The debate has reflected this diversity of interests and views. In essence, however, there is a consensus on what is expected of the industry, namely, to extend provision of adequate, reliable, and affordable electricity service to all citizens and segments of the economy. This means a large-scale electrification program to reach as many of the nearly 50% of households currently without electricity service as soon as possible, tariff reform to promote equity and efficiency, and the upgrading of service quality now being provided by some of the newly consolidated municipal authorities. The issues involved are how best to achieve these results within the context of the national Reconstruction and Development Program, while accounting for time and resource constraints and balancing the interests of the various parties.

  10. West Virginia University 1 Department of Industrial and Management Systems

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    in industrial engineering · Master of science in industrial hygiene · Master of science in safety management in the United States of having two complimentary graduate programs in industrial hygiene and safety accredited of a successful industrial engineer Masters of Science in Industrial Hygiene A graduate of the Industrial Hygiene

  11. Estimating Power System Dynamic States Using Extended Kalman Filter

    SciTech Connect (OSTI)

    Huang, Zhenyu; Schneider, Kevin P.; Nieplocha, Jaroslaw; Zhou, Ning

    2014-10-31T23:59:59.000Z

    Abstract—The state estimation tools which are currently deployed in power system control rooms are based on a steady state assumption. As a result, the suite of operational tools that rely on state estimation results as inputs do not have dynamic information available and their accuracy is compromised. This paper investigates the application of Extended Kalman Filtering techniques for estimating dynamic states in the state estimation process. The new formulated “dynamic state estimation” includes true system dynamics reflected in differential equations, not like previously proposed “dynamic state estimation” which only considers the time-variant snapshots based on steady state modeling. This new dynamic state estimation using Extended Kalman Filter has been successfully tested on a multi-machine system. Sensitivity studies with respect to noise levels, sampling rates, model errors, and parameter errors are presented as well to illustrate the robust performance of the developed dynamic state estimation process.

  12. Extended space expectation values in quantum dynamical system evolutions

    SciTech Connect (OSTI)

    Demiralp, Metin [Istanbul Technical University, Informatics Institute, Maslak, 34469, Istanbul (Turkey)

    2014-10-06T23:59:59.000Z

    The time variant power series expansion for the expectation value of a given quantum dynamical operator is well-known and well-investigated issue in quantum dynamics. However, depending on the operator and Hamiltonian singularities this expansion either may not exist or may not converge for all time instances except the beginning of the evolution. This work focuses on this issue and seeks certain cures for the negativities. We work in the extended space obtained by adding all images of the initial wave function under the system Hamiltonian’s positive integer powers. This requires the introduction of certain appropriately defined weight operators. The resulting better convergence in the temporal power series urges us to call the new defined entities “extended space expectation values” even though they are constructed over certain weight operators and are somehow pseudo expectation values.

  13. Extended fluid models: Pressure tensor effects and equilibria

    SciTech Connect (OSTI)

    Cerri, S. S. [Physics Department “E. Fermi,” University of Pisa and CNISM, Largo B. Pontecorvo 3, 56127 Pisa (Italy) [Physics Department “E. Fermi,” University of Pisa and CNISM, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Max-Planck-Institut für Plasmaphysik, EURATOM association, Boltzmannstr. 2, D-85748 Garching (Germany); Henri, P. [Physics Department “E. Fermi,” University of Pisa and CNISM, Largo B. Pontecorvo 3, 56127 Pisa (Italy) [Physics Department “E. Fermi,” University of Pisa and CNISM, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Université de Nice Sophia Antipolis, CNRS, Observatoire de la Côte d'Azur, BP 4229 06304, Nice Cedex 4 (France); Califano, F.; Pegoraro, F. [Physics Department “E. Fermi,” University of Pisa and CNISM, Largo B. Pontecorvo 3, 56127 Pisa (Italy)] [Physics Department “E. Fermi,” University of Pisa and CNISM, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Del Sarto, D. [Institut Jean Lamour, UMR 7198 CNRS – Université de Lorraine, BP 239 F-54506 Vandoeuvre les Nancy (France)] [Institut Jean Lamour, UMR 7198 CNRS – Université de Lorraine, BP 239 F-54506 Vandoeuvre les Nancy (France); Faganello, M. [International Institute for Fusion Science/PIIM, UMR 7345 CNRS Aix-Marseille University, Marseille (France)] [International Institute for Fusion Science/PIIM, UMR 7345 CNRS Aix-Marseille University, Marseille (France)

    2013-11-15T23:59:59.000Z

    We consider the use of “extended fluid models” as a viable alternative to computationally demanding kinetic simulations in order to manage the global large scale evolution of a collisionless plasma while accounting for the main effects that come into play when spatial micro-scales of the order of the ion inertial scale d{sub i} and of the thermal ion Larmor radius ?{sub i} are formed. We present an extended two-fluid model that retains finite Larmor radius (FLR) corrections to the ion pressure tensor while electron inertia terms and heat fluxes are neglected. Within this model we calculate analytic FLR plasma equilibria in the presence of a shear flow and elucidate the role of the magnetic field asymmetry. Using a Hybrid Vlasov code, we show that these analytic equilibria offer a significant improvement with respect to conventional magnetohydrodynamic shear-flow equilibria when initializing kinetic simulations.

  14. Superconducting Cosmic Strings and One Dimensional Extended Supersymmetric Algebras

    E-Print Network [OSTI]

    V. K. Oikonomou

    2014-04-30T23:59:59.000Z

    In this article we study in detail the supersymmetric structures that underlie the system of fermionic zero modes around a superconducting cosmic string. Particularly, we extend the analysis existing in the literature on the one dimensional $N=2$ supersymmetry and we find multiple $N=2$, $d=1$ supersymmetries. In addition, compact perturbations of the Witten index of the system are performed and we find to which physical situations these perturbations correspond. More importantly, we demonstrate that there exists a much more rich supersymmetric structure underlying the system of fermions with $N_f$ flavors and these are $N$-extended supersymmetric structures with non-trivial topological charges, with "$N$" depending on the fermion flavors.

  15. Energy efficient industrialized housing research program

    SciTech Connect (OSTI)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-12-01T23:59:59.000Z

    This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

  16. Quantum Correlation in One-dimensional Extend Quantum Compass Model

    E-Print Network [OSTI]

    Wen-Long You

    2012-02-04T23:59:59.000Z

    We study the correlations in the one-dimensional extended quantum compass model in a transverse magnetic field. By exactly solving the Hamiltonian, we find that the quantum correlation of the ground state of one-dimensional quantum compass model is vanishing. We show that quantum discord can not only locate the quantum critical points, but also discern the orders of phase transitions. Furthermore, entanglement quantified by concurrence is also compared.

  17. Wave Speed in the Macroscopic Extended Model for Ultrarelativistic Gases

    E-Print Network [OSTI]

    F. Borghero; F. Demontis; S. Pennisi

    2010-12-07T23:59:59.000Z

    An exact macroscopic extended model for ultrarelativistic gases, with an arbitrary number of moments, is present in the literature. Here we exploit equations determining wave speeds for that model. We find interesting results; for example, the whole system for their determination can be divided into independent subsystems and some, but not all, wave speeds are expressed by rational numbers. Moreover, the extraordinary property that these wave speeds for the macroscopic model are the same of those in the kinetic model, is proved.

  18. Extended axion electrodynamics: Optical activity induced by nonstationary dark matter

    E-Print Network [OSTI]

    A. B. Balakin; N. O. Tarasova

    2012-01-14T23:59:59.000Z

    We establish a new self-consistent Einstein-Maxwell-axion model based on the Lagrangian, which is linear in the pseudoscalar (axion) field and its four-gradient and includes the four-vector of macroscopic velocity of the axion system as a whole. We consider extended equations of the axion electrodynamics, modified gravity field equations, and discuss nonstationary effects in the phenomenon of optical activity induced by axions.

  19. Black holes in Born-Infeld extended new massive gravity

    SciTech Connect (OSTI)

    Ghodsi, Ahmad; Yekta, Davood Mahdavian [Department of Physics, Ferdowsi University of Mashhad, P.O. Box 1436, Mashhad (Iran, Islamic Republic of)

    2011-05-15T23:59:59.000Z

    In this paper we find different types of black holes for the Born-Infeld extended new massive gravity. Our solutions include (un)charged warped (anti-)de Sitter black holes for four and six derivative expanded action. We also look at the black holes in unexpanded Born-Infeld action. In each case we calculate the entropy, angular momentum and mass of the black holes. We also find the central charges for the conformal field theory duals.

  20. Light curves from supernova shock breakout through an extended wind

    SciTech Connect (OSTI)

    Ginzburg, Sivan; Balberg, Shmuel [Racah Institute of Physics, The Hebrew University, Jerusalem 91904 (Israel)

    2014-01-01T23:59:59.000Z

    Recent observations suggest that some supernovae may be the result of an explosion into an optically thick circumstellar material, the product of pre-explosion mass loss (wind) by the progenitor star. This scenario has been studied previously both analytically and numerically. However, many previous studies base their analysis on the diffusion approximation for radiation transfer, which is inappropriate in the optically thin outer layers of the wind. Here we study the deviations from diffusion and calculate light curves more accurately using a Monte Carlo approach to photon transfer. We distinguish between 'compact' winds, for which the diffusion approximation is appropriate, and 'extended' winds, which require a more delicate treatment of the radiation. We show that this effect is more significant than that of the light-travel time difference to a distant observer, which has a secondary influence on the light curves of extended-wind systems. We also comment on the applicability of the widely used flux-limited diffusion approximation in this context: we find that it generally does not reproduce the Monte Carlo results. The flux-limited diffusion approximation leads to results that are not only quantitatively but also qualitatively wrong in the extended-wind regime.

  1. Energy efficient industrialized housing research program

    SciTech Connect (OSTI)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; Mc Donald, M.; McGinn, B.; Ryan, P.; Sekiguchi, T. (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-01-01T23:59:59.000Z

    This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

  2. Industrial Gases as a Vehicle for Competitiveness

    E-Print Network [OSTI]

    Dale, J. R.

    -based separation technology was developing to offer an alternative to cryogenic separation for those instances when neither high purity or cryogenic properties were required by the application. It resulted in gas of lower than 99.9995%, "five-nines", purity...INDUSTRIAL GASES AS A VEHICLE FOR COMPETITIVENESS James R. Dale, Director, Technology Programs, Airco Industrial Gases Division, The BOC Group, Inc., Murray Hill, New Jersey ABSTRACT Industrial gases are produced using compressed air...

  3. Process Integration of Industrial Heat Pumps

    E-Print Network [OSTI]

    Priebe, S. J.; Chappell, R. N.

    PROCESS INTEGRATION OF INDUSTRIAL HEAT PUMPS* S. J. Priebe EG&G Idaho, Inc. Idaho Falls, Idaho ABSTRACT The integration of heat pumps into industrial processes shows potential for energy savings. Heat pumps must, however, be integrated... properly relative to the process pinch and the unit operations in the process. The shape of the grand composite curve, the type of heat ?pump drive, and the kind of heat pump cycle were examined to determine their effects on the placement of industrial...

  4. Summary of FY13 Industry Interviews

    SciTech Connect (OSTI)

    Hund, Gretchen; Kurzrok, Andrew J.; Seward, Amy M.; Wyse, Evan T.; Gunawardena, Navindra H.

    2013-09-01T23:59:59.000Z

    This white paper discusses the industry self-regulation project’s outreach interview activities for FY13 and summarizes conclusions.

  5. Emerging energy-efficient industrial technologies

    E-Print Network [OSTI]

    2000-01-01T23:59:59.000Z

    Microturbines: What is a Microturbine? ” OIT’s Industrial1999c. Summary of the Microturbine Technology Summit:s Emerging Companies; Microturbine Firm Hopes IPO Generates

  6. Industrial Energy Efficiency Projects Improve Competitiveness...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency Projects Improve Competitiveness and Protect Jobs Industrial Energy Efficiency Projects Improve Competitiveness and Protect Jobs U.S. Department of Energy (DOE)...

  7. Unitil- Commercial and Industrial Energy Efficiency Programs

    Broader source: Energy.gov [DOE]

    Unitil offers three different programs for its commercial, industrial, and institutional customers in New Hampshire: the Small Business Energy Efficiency Services Program, the Large Business...

  8. Industrial Assessment Centers Help Students, Communities Learn...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Another Industrial Assessment Center Student Success Story Dayakar Devaru, University of West Virginia graduate student, named Outstanding IAC Engineering Student for his...

  9. Industrial and Process Efficiency Performance Incentives

    Broader source: Energy.gov [DOE]

    The New York State Energy Research and Development Authority (NYSERDA) offers the Industrial and Process Efficiency (IPE) Program to provide performance-based incentives to manufacturers and data...

  10. Emerging energy-efficient technologies for industry

    E-Print Network [OSTI]

    2004-01-01T23:59:59.000Z

    J. , Nadel, S. , 2000. “Emerging Energy-Efficient IndustrialThorne, J. , 1998. “Emerging Energy-Saving Technologies andand Policy Implications of Energy and Material Efficiency

  11. Emerging energy-efficient industrial technologies

    E-Print Network [OSTI]

    2000-01-01T23:59:59.000Z

    for U.S. Department of Energy’s Office of IndustrialLaboratory. Burlington, MA: Office of Energy Efficiencyand Renewable Energy. (Food-4) (Motorsys-8) (Overview)

  12. Emerging energy-efficient technologies for industry

    E-Print Network [OSTI]

    2001-01-01T23:59:59.000Z

    J. , Nadel, S. , 2000. “Emerging Energy-Efficient IndustrialThorne, J. , 1998. “Emerging Energy-Saving Technologies andand Policy Implications of Energy and Material Efficiency

  13. Emerging Energy-Efficient Technologies for Industry

    E-Print Network [OSTI]

    2005-01-01T23:59:59.000Z

    Thorne, J. , 1998. “Emerging Energy-Saving Technologies andand Policy Implications of Energy and Material EfficiencyD. Ed. 1999. “Industrial Energy Efficiency Policies:

  14. ANALYSIS OF THE CALIFORNIA ENERGY INDUSTRY

    E-Print Network [OSTI]

    Authors, Various

    2010-01-01T23:59:59.000Z

    shown as changes in oil demand for elec- trical energyindustry fuel. ity Oil demand is specified by four majorft /year) II. Annual Oil Demand (10 Transportation Industry

  15. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01T23:59:59.000Z

    ISO 9000/14000 quality and environmental management systems,industrial quality and environmental management systems suchISO 9000/14000 quality and environmental management systems,

  16. Characterizing emerging industrial technologies in energy models

    E-Print Network [OSTI]

    Laitner, John A. Skip; Worrell, Ernst; Galitsky, Christina; Hanson, Donald A.

    2003-01-01T23:59:59.000Z

    Efficient and Clean Energy Technologies, 2000. Scenarios ofEmerging Energy-Efficient Industrial Technologies,” Lawrenceinformation about energy efficiency technologies, their

  17. A BRIEF HISTORY OF INDUSTRIAL CATALYSIS

    E-Print Network [OSTI]

    Heinemann, Heinz

    2013-01-01T23:59:59.000Z

    greater in chemical and petrochemical applications than inMonomers Olefin Petrochemicals Bimetallic reformingsales and values; for the Petrochemical Industry (Table B) X

  18. Industrial Energy Efficiency and Climate Change Mitigation

    SciTech Connect (OSTI)

    Worrell, Ernst; Bernstein, Lenny; Roy, Joyashree; Price, Lynn; de la Rue du Can, Stephane; Harnisch, Jochen

    2009-02-02T23:59:59.000Z

    Industry contributes directly and indirectly (through consumed electricity) about 37% of the global greenhouse gas emissions, of which over 80% is from energy use. Total energy-related emissions, which were 9.9 GtCO2 in 2004, have grown by 65% since 1971. Even so, industry has almost continuously improved its energy efficiency over the past decades. In the near future, energy efficiency is potentially the most important and cost-effective means for mitigating greenhouse gas emissions from industry. This paper discusses the potential contribution of industrial energy efficiency technologies and policies to reduce energy use and greenhouse gas emissions to 2030.

  19. ITP Metal Casting: Metalcasting Industry Technology Roadmap

    Broader source: Energy.gov (indexed) [DOE]

    foundries spend a higher proportion of their funds available for capital improvements on pollution control equipment. The industry as a whole, however, invests significantly in...

  20. Status of State Electric Industry Restructuring Activity

    Reports and Publications (EIA)

    2010-01-01T23:59:59.000Z

    Presents an overview of the status of electric industry restructuring in each state. Restructuring means that a monopoly system of electric utilities has been replaced with competing sellers.