Sample records for industries including aerospace

  1. New environmental regulation for the aerospace industry: The aerospace NESHAP

    SciTech Connect (OSTI)

    Bauer, J.P.; Gampper, B.P. [Brusn and McDonnell Waste Consultants, Inc., Kansas City, MO (United States); Baker, J.M. [Raytheon Aircraft Co., Wichita, KS (United States)

    1997-12-31T23:59:59.000Z

    40 CFR Part 63, Subpart GG, the National Emission Standard for Hazardous Air Pollutants for Aerospace Manufacturing and Rework Facilities, commonly referred to as the Aerospace NESHAP, was issued on September 1, 1995 and requires compliance by September 1, 1998. The regulation affects any facility that manufactures or reworks commercial, civil, or military aircraft vehicles or components and is a major source of Hazardous Air Pollutants (HAPs). The regulation targets reducing Volatile Organic Compound (VOC) and Hazardous Air Pollutant (HAP) emissions to the atmosphere. Processes affected by the new regulation include aircraft painting, paint stripping, chemical milling masking, solvent cleaning, and spray gun cleaning. Regulatory requirements affecting these processes are summarized, and different compliance options compared in terms of cost-effectiveness and industry acceptance. Strategies to reduce compliance costs and minimize recordkeeping burdens are also presented.

  2. High Assurance Aerospace CPS & Implications for the Automotive Industry

    E-Print Network [OSTI]

    Poovendran, Radha

    High Assurance Aerospace CPS & Implications for the Automotive Industry Scott A. Lintelman1 assurance CPS can mutually benefit aerospace and automotive industries. I. INTRODUCTION Commercial aviation]. In the automotive industry, recent trends in intelligent transportation systems can be evidently mapped to e

  3. Development of alternate parts for the aerospace industry

    E-Print Network [OSTI]

    Tapley, James Paul

    2010-01-01T23:59:59.000Z

    This thesis explores the topic of the development of alternate parts for the aerospace industry, drawing on industry examples to demonstrate methods and approaches and the benefits to firms engaged in these activities. I ...

  4. An examination of Boeing's supply chain management practices within the context of the global aerospace industry

    E-Print Network [OSTI]

    Çizmeci, DaÄŸ lar

    2005-01-01T23:59:59.000Z

    This thesis examines the supply chain management practices of the Boeing Commercial Airplane Company within the context of the global aerospace industry. The methodology used for this study includes a study of emerging ...

  5. aerospace industries division: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute for Aerospace Survey & Earth Rossiter, D G "David" 31 AEROSPACE SAFETY ADVISORY PANEL Geosciences Websites Summary: AEROSPACE SAFETY ADVISORY PANEL ANNUAL...

  6. An Assessment of the Degree of Implementation of the Lean Aerospace Initiative Principles and Practices within the US Aerospace and Defense Industry

    E-Print Network [OSTI]

    Shaw, Thomas E.

    This report is a formal documentation of the results of an assessment of the degree to which Lean Principles and Practices have been implemented in the US Aerospace and Defense Industry. An Industry Association team prepared ...

  7. Broadening Industry Governance to Include Nonproliferation

    SciTech Connect (OSTI)

    Hund, Gretchen; Seward, Amy M.

    2008-11-11T23:59:59.000Z

    As industry is the first line of defense in detecting and thwarting illicit trade networks, the engagement of the private sector is critical to any government effort to strengthen existing mechanisms to protect goods and services throughout the supply chain. This study builds on previous PNNL work to continue to evaluate means for greater industry engagement to complement and strengthen existing governmental efforts to detect and stem the trade of illicit goods and to protect and secure goods that could be used in making a weapon of mass destruction. Specifically, the study evaluates the concept of Industry Self Regulation, defined as a systematic voluntary program undertaken by an industry or by individual companies to anticipate, implement, supplement, or substitute for regulatory requirements in a given field, generally through the adoption of best practices. Through a series of interviews with companies with a past history of non-compliance, trade associations and NGOs, the authors identify gaps in the existing regulatory infrastructure, drivers for a self regulation approach and the form such an approach might take, as well as obstacles to be overcome. The authors conclude that it is at the intersection of industry, government, and security that—through collaborative means—the effectiveness of the international nonproliferation system—can be most effectively strengthened to the mutual benefit of both government and the private sector. Industry has a critical stake in the success of this regime, and has the potential to act as an integrating force that brings together the existing mechanisms of the global nonproliferation regime: export controls, physical protection, and safeguards. The authors conclude that industry compliance is not enough; rather, nonproliferation must become a central tenant of a company’s corporate culture and be viewed as an integral component of corporate social responsibility (CSR).

  8. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Ávila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01T23:59:59.000Z

    in Aerospace and Automotive Manufacturing Author: Avila,in the Aerospace and Automotive Industry“, SAE Transactionsin the aerospace and automotive industries has become

  9. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Avila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01T23:59:59.000Z

    in Aerospace and Automotive Manufacturing Miguel Ávila, Joelin the aerospace and automotive industries has becomes in the aerospace and automotive industry, only during the

  10. Cogeneration handbook for the petroleum refining industry. [Glossary included

    SciTech Connect (OSTI)

    Not Available

    1984-02-01T23:59:59.000Z

    This Handbook deals only with industrial cogeneration, that is, simultaneous production of both heat and electricity at the industrial plant site. The cogenerator has the option of either selling all cogenerated power to the utility while simultaneously purchasing power to satisfy his plant demand, or directly supplying the plant demand with cogenerated power, thus displacing utility-supplied power. This Handbook provides the refinery plant manager or company energy coordinator with a framework for making a preliminary assessment of the feasibility and viability of cogeneration at a particular plant. The handbook is intended to provide an understanding of the potential of several standardized cogeneration systems, as well as their limitations. However, because the decision to cogenerate is very site specific, the handbook cannot provide all of the answers. It does attempt, however, to bring to light the major issues that should be addressed in the decision-making process. The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. 39 figures, 37 tables.

  11. Faculty of Engineering Aerospace Engineering

    E-Print Network [OSTI]

    Faculty of Engineering Aerospace Engineering Canada's aerospace industry is one of the largest. One of the key factors that will continue this success is a steady stream of engineering talent.uwindsor.ca/mame Rigorous, Enriching Programs Our new Aerospace Engineering program at Windsor is an optional stream within

  12. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Ávila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01T23:59:59.000Z

    the Aerospace and Automotive Industry“, SAE Transactions J.aerospace and automotive industries has become increasinglyaerospace and automotive industries has become increasingly

  13. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Avila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01T23:59:59.000Z

    aerospace and automotive industries has become increasinglythe aerospace and automotive industry, only during the pastLMA partners in the automotive industry. formation and crown

  14. aerospace pyrotechnic systems: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Websites Summary: High Assurance Aerospace CPS & Implications for the Automotive Industry Scott A. Lintelman1 of this next-generation aerospace CPS. This paper...

  15. aerospace technology development: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Master of Science Gallo, Linda C. 280 High Assurance Aerospace CPS & Implications for the Automotive Industry Engineering Websites Summary: High Assurance Aerospace CPS &...

  16. advanced aerospace systems: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Master of Science Gallo, Linda C. 300 High Assurance Aerospace CPS & Implications for the Automotive Industry Engineering Websites Summary: High Assurance Aerospace CPS &...

  17. An exploration of supply chain management practices in the aerospace industry and in Rolls-Royce

    E-Print Network [OSTI]

    Tiwari, Mohit

    2005-01-01T23:59:59.000Z

    This thesis is a part of the Supply Chain 2020 research project which seeks to study best practices in supply chain management in multiple industries in order to develop a deeper understanding of key principles and practices ...

  18. Measuring and managing intellectual capital in the U.S. aerospace industry

    E-Print Network [OSTI]

    Siegel, Lawrence R

    2004-01-01T23:59:59.000Z

    "Intellectual capital" has been heralded in business journals as an important component for successful business development in today's economy. Intellectual capital consists of knowledge-based assets -- including people, ...

  19. A Snapshot of the Texas Aerospace Industry and a Comparison of Competitor States

    E-Print Network [OSTI]

    Ario, Shannon; Elliott, Elizabeth; Gray, Kevin; Hemmeline, Charles; Pomeroy, Dan; White, Andrew; Zurawski, Paul

    2002-01-01T23:59:59.000Z

    of Aviation ...................................................................................19 Table 3-B. Major Airports in the U.S.- 1998...............................................................................21 Table 3-C. Data for the U... MarsPort Engineering Project. Aviation Texas has numerous aviation assets including five of the 55 most active airports and the most plane departures of any of the states studied in this report. Texas ranks 3 rd behind California and Florida...

  20. Benefits of Implementing Lean Practices and the Impact of the Lean Aerospace Initiative in the Defense Aerospace Industry and Government Agencies

    E-Print Network [OSTI]

    Unknown author

    1999-01-31T23:59:59.000Z

    In the 1980’s, many United States industrial organizations started developing new production processes to improve quality, reduce cost, and better respond to customer needs and the pressures of global competition. This new ...

  1. Flexibility in Aerospace and Automotive Component Manufacturing Systems

    E-Print Network [OSTI]

    de Weck, Olivier L.

    Traditionally, parts fabrication in the aerospace and automotive industries has been associated with a number for the aerospace and automotive industries. The thesis lays out a set of generic flexibility strategies and sets I could receive an impression of manufacturing in today's automotive and aerospace industry

  2. FacultyofAerospaceEngineering Aerospace Masterweeks

    E-Print Network [OSTI]

    Lindken, Ralph

    faster. The technological demands of larger wind turbines, wind farms, integration in the electricity · Wind farm aerodynamics Rotor Design · Aerodynamics · Structure & Composites Electrical Power SystemsFacultyofAerospaceEngineering Aerospace Masterweeks Aerospace Engineering & European Wind Energy

  3. aerospace vehicle development: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A350-XWB, signals a new era in the aerospace industry. The high stiffness to weight ratio of ... Ahn, Junghyun 2008-01-01 214 Steven H. Collins Mechanical and Aerospace...

  4. Optimization of Industrial Refrigeration Plants: Including a Case Study at Stonyfield Farm Yogurt

    E-Print Network [OSTI]

    Dixon, R.; McCowan, B.; Drake, L.; Epstein, G.; D'Antonio, M.; Moray, S.

    2006-01-01T23:59:59.000Z

    controls and unloading (specifically in the case of screw compressors which do not unload linearly). A lower refrigerant temperature results in lower suction pressure and increased compressor power requirements. A lower condensing pressure, which is a...Optimization of Industrial Refrigeration Plants: Including a Case Study at Stonyfield Farm Yogurt Mark D’Antonio Satyen Moray Brian McCowan Gary Epstein VP Engineering Services Project Manager VP Technology & Development President Energy...

  5. aerospace expeditionary force: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    important as matrix materials for the advanced composites used in aerospace, electronics, automotive and other industries. (more) Subramaniam, C 1994-01-01 257 The influence of...

  6. aerospace research establishment: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    important as matrix materials for the advanced composites used in aerospace, electronics, automotive and other industries. (more) Subramaniam, C 1994-01-01 371 Microscale...

  7. aging aerospace structures: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and improving performance are two key factors in structural design. In the aerospace and automotive industries, this is particularly true with respect to design criteria such as...

  8. aerospace medicine: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    important as matrix materials for the advanced composites used in aerospace, electronics, automotive and other industries. (more) Subramaniam, C 1994-01-01 244 The influence of...

  9. Integrated analysis procedure of aerospace composite structure

    E-Print Network [OSTI]

    Ahn, Junghyun

    2008-01-01T23:59:59.000Z

    The emergence of composite material application in major commercial aircraft design, represented by the Boeing 787 and Airbus A350-XWB, signals a new era in the aerospace industry. The high stiffness to weight ratio of ...

  10. #include #include

    E-Print Network [OSTI]

    Campbell, Andrew T.

    process #12;#include #include pid_t pid = fork(); if (pid () failed */ } else if (pid == 0) { /* parent process */ } else { /* child process */ } #12;thread #12

  11. #include #include

    E-Print Network [OSTI]

    Poinsot, Laurent

    #include #include //Rappels : "getpid()" permet d'obtenir son propre pid // "getppid()" renvoie le pid du père d'un processus int main (void) { pid_t pid_fils; pid_fils = fork(); if(pid_fils==-1) { printf("Erreur de création du processus fils\

  12. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering It is a new beginning for innovative fundamental and applied and consolidation of bulk nanocrystalline materials using mechanical alloying, the alloy development and synthesis

  13. Decision-maker's guide to wood fuel for small industrial energy users. Final report. [Includes glossary

    SciTech Connect (OSTI)

    Levi, M. P.; O'Grady, M. J.

    1980-02-01T23:59:59.000Z

    The technology and economics of various wood energy systems available to the small industrial and commercial energy user are considered. This book is designed to help a plant manager, engineer, or others in a decision-making role to become more familiar with wood fuel systems and make informed decisions about switching to wood as a fuel. The following subjects are discussed: wood combustion, pelletized wood, fuel storage, fuel handling and preparation, combustion equipment, retrofitting fossil-fueled boilers, cogeneration, pollution abatement, and economic considerations of wood fuel use. (MHR)

  14. Aerospace mergers and acquisitions from a lean enterprise perspective

    E-Print Network [OSTI]

    Kim, Junhong, 1974-

    2004-01-01T23:59:59.000Z

    In the past twenty years, companies in the aerospace industry experienced major transitions: mergers and acquisitions, and lean transformation initiatives. This thesis presents research about the relation of lean efforts ...

  15. Fire fighting in aerospace product development : a study of project capacity and resource planning in an aerospace enterprise

    E-Print Network [OSTI]

    McQuarrie, Allan J. (Allan John), 1963-

    2003-01-01T23:59:59.000Z

    It is broadly recognized in the aerospace industry, as well as many others, that organizations which effectively execute development projects to meet desired cost, schedule, and performance targets for their customers ...

  16. Department of Mechanical, Materials, and Aerospace Engineering Department of Mechanical, Materials, and Aerospace Engineering

    E-Print Network [OSTI]

    Saniie, Jafar

    instrumentation, com- bustion, internal combustion engines, two-phase flow and heat-transfer, electrohydrodynamics mobile and stationary combustion sources. Materials science and engineering laboratories includeDepartment of Mechanical, Materials, and Aerospace Engineering Department of Mechanical, Materials

  17. Lean enterprise in the construction industry

    E-Print Network [OSTI]

    Marchini-Blanco, Juan, 1971-

    2004-01-01T23:59:59.000Z

    This thesis explores the application of the Lean Enterprise Model (LEM) to construction firms. LEM is a framework derived from lean manufacturing principles by MIT's Lean Aerospace Initiative (LAI) for the aerospace industry. ...

  18. Mechanical and Aerospace Engineering

    E-Print Network [OSTI]

    Integration Specialist in the Smart Grid Technologies and Strategy Division of the California IndependentMechanical and Aerospace Engineering seminar The Challenges of Renewable Energy Integration into the CAISO Grid Abstract I will be presenting who the CAISO is and what we do. We will also discuss where we

  19. Mechanical and Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical and Aerospace Engineering Abstract Solid materials used in energy conversion and storage Department of Civil & Environmental Engineering, Department of Mechanical Engineering, Northwestern University April 6, 2012 at 2:00pm in SCOB 252 School for Engineering of Matter, Transport & Energy #12;

  20. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering An experimental methodology is presented for mechanism Yang is a second graduate student in the department of mechanical engineering of ASU. He received his Jian Yang School for Engineering of Matter, Transport and Energy Arizona State University October 5

  1. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering The development of high-energy storage devices has been one energy capacity over 500 cycles. Teng Ma received his BS degree in Thermal and Power Engineering from Xi and Technology of China in 2009. He is currently a Ph.D. candidate in Mechanical Engineering at School

  2. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    in Mechanical Engineering at the School for Engineering of Matter, Transport and Energy, working in Dr. MarcusMechanical & Aerospace Engineering The atomization of a liquid jet by a high speed cross.S.E. degree in mechanical engineering from Amirkabir University of Technology in 2006 and M.S. degree

  3. aerospace engineering students: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aerospace Lindken, Ralph 2 Mechanical and Aerospace Engineering Postgraduate Student Physics Websites Summary: & Aerospace Engineering and Naval Architecture & Marine...

  4. Aerospace Applications for OLED Lighting

    Energy Savers [EERE]

    2015 Boeing. All rights reserved. Export Controlled ECCN: 9E991 NLR Aerospace economics drive long development cycles and even longer product lifecycles * Development of a...

  5. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    SHIP - Solar heat for industrial processes. Internationalsolar power could be used to provide process heat for

  6. Design for affordability in defense and aerospace systems using tradespace-based methods

    E-Print Network [OSTI]

    Wu, Marcus Shihong

    2014-01-01T23:59:59.000Z

    Program failures have plagued the defense and aerospace industry for decades, as unanticipated cost and schedule overruns have rendered the development of systems ineffective in terms of time and cost considerations. This ...

  7. Industrial Customer Perspectives on Utility Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Customer Perspectives on Utility Energy Efficiency Programs Industrial Customer Perspectives on Utility Energy Efficiency Programs These presentations from ATK Aerospace Systems,...

  8. Development of laboratory and process sensors to monitor particle size distribution of industrial slurries (including shape characterization). Final technical report

    SciTech Connect (OSTI)

    Pendse, H.P.; Goetz, P.J.; Sharma, A.; Han, W; Bliss, T.C.

    1996-10-01T23:59:59.000Z

    The overall goal of the Particle Size Distribution (PSD) sensor projects was to develop and commercialize a sensor system capable of particle analysis, in terms of size distributions, using concentrated suspensions at high solids concentrations. The early research was focused on application of ultrasonic spectroscopy of inorganic pigment slurries (e.g. titanium dioxide) commonly encountered on paper industry. During the project prototypes were tested in both academic and industrial laboratories. Work also involved successful field tests of the on-line prototype at a pigment manufacturing facility. Pen Kem continued the work at its cost beyond the initial funded period from March `92 to September `94. The first project (DE- FC05-88CE40684), which began in September 1988, culminated in a commercial laboratory instrument, Pen Kem AcoustoPhor {trademark} 8000, put on the market in June 1993. The follow-on project was aimed at investigation of shape and orientation effects on ultrasonic spectroscopy. A new cooperative agreement was awarded in September 1994 (DE-FC05-94CE40005) to develop shape characterization capabilities deemed critical by the clay industry. This follow-on project achieved following successes: A theoretical model was developed to account for the effects of size-dependent aspect ratios of spheroid particles under different orientations on ultrasound attenuation spectra of concentrated slurries. The theoretical model was confirmed by laboratory tests on kaolin slurries. An algorithm was developed to simulate evolution of particle orientation fields in simple squeezing flows.

  9. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    oil, starch and corn refining, since these can be a source of fuel products. The sugar cane industry

  10. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

  11. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    iron and steel production. IEA Greenhouse Gas R&D Programme,tempera- ture range. IEA/Caddet, Sittard, The Netherlands.industry. Cheltenham, UK, IEA Greenhouse Gas R&D Programme,

  12. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    process residual like bagasse are now available (Cornland etsugar in- dustry uses bagasse and the edible oils industrySection 7.4.7. ). The use of bagasse for energy is likely to

  13. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Note: Biomass energy included Source: Price et al. , 2006.Note: Biomass energy included Source: Price et al. (2006).

  14. Industry

    SciTech Connect (OSTI)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01T23:59:59.000Z

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  15. Mechanical, Materials, and Aerospace Engineering Department of Mechanical, Materials, and Aerospace Engineering

    E-Print Network [OSTI]

    Heller, Barbara

    Interdisciplinary Programs Master of Science in Mechanical and Aerospace Engineering with specialization in Energy/Environment/Economics (E3 ) Master of Mechanical and Aerospace Engineering with specialization in EnergyMechanical, Materials, and Aerospace Engineering Department of Mechanical, Materials, and Aerospace

  16. MIT and the Aerospace Industry MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    is RAVEN (Real-time indoor Autonomous Vehicle test ENviron- ment), a unique experimental facility that uses · Human-vehicle interactions / systems · Space vehicles and robotics · Energy use, environmental impact in combustion systems, supersonic impinging jets, and blade tonals in underwater vehicles; active

  17. PROPULSION AND ENERGY 54 AEROSPACE AMERICA/DECEMBER 2005

    E-Print Network [OSTI]

    Walker, Mitchell

    PROPULSION AND ENERGY 54 AEROSPACE AMERICA/DECEMBER 2005 Electric propulsion Several significant advancements in electric propulsion (EP) systems and related technolo- gies occurred this year. Flight programs throughout the discharge and includes the effects of magnetic fields on the primary electrons. PRIMA is used

  18. Calcium based bulk metallic glass has desirable properties for the aerospace industry including high strength and elasticity in addition to low density. These properties are due to the amorphous

    E-Print Network [OSTI]

    Rollins, Andrew M.

    structure of the glass and low atomic weight constituents. Near the glass transition, extreme softening by lubricating with methanol and grinding with 800 and 4000 grit SiC paper. X-Ray diffraction spectra were SUMMARY · In the as-received condition, the Ca-Mg-Zn glass has a higher 3pt bend notch toughness than

  19. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    for carbon capture and storage technologies. Annual Reviewof carbon capture and storage (CCS) technology offers aCarbon dioxide Capture and Storage (CCS), including oxy-fuel combustion21 Process-specific technologies

  20. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    implementation of predictive methods in commercial, numerical codes. Finally, opportunities for students University in 2007. During this time, he has been elected to several leadership positions within the ASME, including as the secretary of the ASME Research Committee on the Mechanics of Jointed Structures, he has

  1. The University's Aerospace Engineering Research Centre was established in 2007 and has since made a significant contribution to research and development in the aerospace

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    The aerospace industry is increasingly using composite materials, such as carbon fibre, in the building damage from an impact forms in composite aircraft materials, with the aim of assisting designers to power them. However, the difficulty with these new materials is that a low velocity impact

  2. GRADUATE STUDIES IN MECHANICAL AND AEROSPACE ENGINEERING Department of Mechanical and Aerospace Engineering

    E-Print Network [OSTI]

    Mohan, Chilukuri K.

    A Guide to GRADUATE STUDIES IN MECHANICAL AND AEROSPACE ENGINEERING at Department of Mechanical...................................................................................................... 3 2. Master of Science in Mechanical and Aerospace Engineering ........................................................................................................................ 6 4. Master of Science in Energy Systems Engineering (MSESE

  3. Department of Mechanical, Materials, and Aerospace Engineering Department of Mechanical, Materials, and Aerospace Engineering

    E-Print Network [OSTI]

    Heller, Barbara

    in Mechanical and Aerospace Engineering with specialization in Energy/Environment/Economics (E3 ) Master of Mechanical and Aerospace Enginering with specialization in Energy/Environment/Economics (E3 ) CertificateDepartment of Mechanical, Materials, and Aerospace Engineering Department of Mechanical, Materials

  4. Aerospace Power & Electronics Simulation Workshop 2004 Satellite Attitude Control

    E-Print Network [OSTI]

    Simon, Dan

    Aerospace Power & Electronics Simulation Workshop 2004 · Satellite Attitude Control System Design;3Aerospace Power & Electronics Simulation Workshop 2004 ADCS ·ADCS: Attitude Determination and Control subsystem ·Attitude Determination - Using sensors ·Attitude Control - Using actuators #12;4Aerospace Power

  5. Department of Mechanical and Aerospace Engineering The Department of Mechanical and Aerospace Engineering (MAE) at the University of Florida invites

    E-Print Network [OSTI]

    Roy, Subrata

    and aerospace sciences, (4) cellular mechanics and engineering, (5) energy, with emphasis on renewable Department of Mechanical and Aerospace Engineering The Department of Mechanical of the above areas. Applicants must have a Ph.D. in mechanical or aerospace engineering

  6. aerospace team online: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Aerospace Engineering Online by the SEAS Materials Science Websites Summary: Aerospace Engineering Online by the SEAS UCLA MS Engineering Online, msenrgol.seas.ucla.edu Area is...

  7. Faculty Positions Department of Aerospace Engineering

    E-Print Network [OSTI]

    Faculty Positions Department of Aerospace Engineering Dwight Look College of Engineering Texas A&M University The Department of Aerospace Engineering in the Dwight Look College of Engineering is continuing for qualified students to pursue engineering education at Texas A&M University (http://engineering.tamu.edu/25by

  8. OKLAHOMA STATE UNIVERSITY Mechanical and Aerospace Engineering

    E-Print Network [OSTI]

    OKLAHOMA STATE UNIVERSITY Mechanical and Aerospace Engineering Assistant Professor The School (6) tenure-track faculty positions at the Assistant Professor rank. Exceptional candidates in all precision manufacturing, HVAC&R, vibrations, aircraft and spacecraft, robotics, unmanned systems, autonomy

  9. Inventory optimization in an aerospace supply chain

    E-Print Network [OSTI]

    Lo, Billy S. (Billy Si Yee)

    2007-01-01T23:59:59.000Z

    Strategic inventory management has become a major focus for Honeywell Aerospace as the business unit challenged itself to meeting cost reduction goals while maintaining a high level of service to its customers. This challenge ...

  10. Aerospace Engineering Pre-Professional Courses Degree Plan for Bachelor of Science in Aerospace Engineering 2006

    E-Print Network [OSTI]

    Texas at Arlington, University of

    Engineering Analysis MAE 2323 Dynamics MAE 3330 Matrices Lin Alg Prerequisite Prerequisite or Concurrent Enrollment MAE 3309 Thermo Engineering MAE 2301 Intro to A&A MAE 2312 Solid Mech Concurrent EnrollmentConcurrentAerospace Engineering Pre-Professional Courses Degree Plan for Bachelor of Science in Aerospace

  11. aerospace tools faast: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and laboratory facilities unsurpassed in Europe: low-speed (35msec) and high-speed wind in aerospace technology in all of Europe. The Faculty of Aerospace Engineering draws...

  12. auxiliary aerospace power: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Solar Simulation Workshop 2004 Spacecraft control type Passive control - Gravity gradient control - Spin controlAerospace Power & Electronics...

  13. aerospace battery workshop: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Solar Simulation Workshop 2004 Spacecraft control type Passive control - Gravity gradient control - Spin controlAerospace Power & Electronics...

  14. Analysis of sourcing & procurement practices : a cross industry framework

    E-Print Network [OSTI]

    Koliousis, Ioannis G

    2006-01-01T23:59:59.000Z

    This thesis presents and analyzes the various practices in the functional area of Sourcing and Procurement. The 21 firms that are studied operate in one of the following industries: Aerospace, Apparel/ Footwear, Automotive, ...

  15. aerospace industry: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16802 Phone: (814) 863-1502 E-Mail: vigor@psu.edu Bill Vavra (B.S., Aer E: 1974) Raytheon Aircraft Co-mail: billvavra@rac.ray.com Honorary Member: Vance Coffman, Retired CEO...

  16. Shanghai Aerospace Industrial General Corporation aka Shanghai Academy of

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AGShandong Lusa New Energy Co Ltd JumpSpaceflight

  17. Sibley School of Mechanical and Aerospace Engineering

    E-Print Network [OSTI]

    Bonassar, Larry

    design; sustainable design; additive manufacturing; manufacturing of advanced and multifunctional 607 255-0813 mc288@cornell.edu October 2014 Faculty Position in Design and Manufacturing Mechanical and Manufacturing, as related strongly to the disciplines within Mechanical and Aerospace Engineering. Candidates

  18. FacultyofAerospace Engineering MSc Programme

    E-Print Network [OSTI]

    Langendoen, Koen

    as Nuna 6, the solar- powered car that won second place in the 2011 World Solar Challenge in Australia in aircraft and propulsion system design. Aerodynamics and Wind Energy The MSc track in Aerodynamics and Wind Energy combines fundamental and applied research disciplines of aerospace and wind-power systems

  19. Mechanical & Aerospace Engineering Turning Ideas into Reality

    E-Print Network [OSTI]

    Mottram, Nigel

    Mechanical & Aerospace Engineering Turning Ideas into Reality EnErgy Environ m Ent HEaltH mat Overview The Courses Mechanical Engineering (MEng / BEng) Mechanical Engineering With International Study (MEng / BEng) Aero-Mechanical Engineering (MEng / BEng) E N T r y F A Q S A p p l y i n g C a m p u

  20. Aerospace and Mechanical Engineers design and build unique, complex mechanical, optical,

    E-Print Network [OSTI]

    Rohs, Remo

    , and electronic systems, ranging in scale from the International Space Station to micro-scale electric generators undergraduate research and student projects have included the creation of a composite material violin, electric airplanes, and formula race cars for competition. aerospace & mechanical ame overview · programs available

  1. Aerospace and Mechanical Engineers design and build unique, complex mechanical-optical-

    E-Print Network [OSTI]

    Rohs, Remo

    -optical- electronic systems, ranging in scale from the International Space Station to micro-scale electric generators undergraduate research and student projects have included the creation of a composite material violin, electric airplanes, formula race cars for competition, and custom wave-tanks for testing surfboards. AEROSPACE

  2. Industrial Sites Work Plan for Leachfield Corrective Action Units: Nevada Test Site and Tonopah Test Range, Nevada (including Record of Technical Change Nos. 1, 2, 3, and 4)

    SciTech Connect (OSTI)

    DOE/NV

    1998-12-18T23:59:59.000Z

    This Leachfield Corrective Action Units (CAUs) Work Plan has been developed in accordance with the Federal Facility Agreement and Consent Order (FFACO) that was agreed to by the U.S. Department of Energy, Nevada Operations Office (DOE/NV); the State of Nevada Division of Environmental Protection (NDEP); and the U.S. Department of Defense (FFACO, 1996). Under the FFACO, a work plan is an optional planning document that provides information for a CAU or group of CAUs where significant commonality exists. A work plan may be developed that can be referenced by leachfield Corrective Action Investigation Plans (CAIPs) to eliminate redundant CAU documentation. This Work Plan includes FFACO-required management, technical, quality assurance (QA), health and safety, public involvement, field sampling, and waste management documentation common to several CAUs with similar site histories and characteristics, namely the leachfield systems at the Nevada Test Site (NTS) and the Tonopah Test Range (TT R). For each CAU, a CAIP will be prepared to present detailed, site-specific information regarding contaminants of potential concern (COPCs), sampling locations, and investigation methods.

  3. ageless aerospace vehicles: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in SCOB 228 School for Engineering of Matter, Transport & Energy 12; 49 Aerospace Safety Advisory Panel Geosciences Websites Summary: Joseph W. Dyer, USN (Ret.), Chair Dr....

  4. aerospace sciences meeting: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    School of Engineering and Applied Science Department of Mechanical and Aerospace Materials Science Websites Summary: Princeton University School of Engineering and Applied...

  5. aerospace medicine vol: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ON AEROSPACE AND ELECTRONIC SYSTEMS, VOL. XX, NO. Y, MONTH 2006 1 Knowledge-based system for multi-target tracking Computer Technologies and Information Sciences Websites...

  6. Sandia National Laboratories: Careers: Aerospace Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home DistributionTransportationVice-President ofScience &AboutAerospace

  7. Career Map: Aerospace Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy Change RequestFirst Report to the PrimePilotAwardsCareerAerospace

  8. CASL Industry Council Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IndustryCouncil.shtml The new members that joined the Industry Council include NPP owneroperators with analysis capability: Tyrone Stevens of Exelon, and SMR vendors:...

  9. aerospace systems test: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aerospace systems test First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 26th Aerospace Testing Seminar,...

  10. 34 McCormick / spring Lead mechanical engineer, Titan Aerospace

    E-Print Network [OSTI]

    Chen, Wei

    and solar panels. Anyway, I learned about the job through a solar car listserv. I contacted him and becameCormick: What does Titan Aerospace do? Cornew: Titan Aerospace is a startup that designs and builds solar-powered unmanned aerial vehicles, or drones. Our long-term goal is to build solar-powered UAVs that could stay

  11. aerospace nuclear safety: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aerospace nuclear safety First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 AEROSPACE SAFETY ADVISORY...

  12. T. G. Bifano Department of Aerospace and Mechanical

    E-Print Network [OSTI]

    T. G. Bifano Department of Aerospace and Mechanical Engineering, Boston University, Boston, MA 02215 T. A. Dow Department of Mechanical and Aerospace Engineering, Precision Engineering Center, North stress, the mechanism of deformation will change from one of re- versible energy storage via elastic

  13. BS in Aerospace Engineering ABET Accreditation The Bachelor of Science program in Aerospace Engineering at Syracuse University is accredited by

    E-Print Network [OSTI]

    Mohan, Chilukuri K.

    the impact of engineering solutions in a global, economic, environmental, and societal context (iBS in Aerospace Engineering ABET Accreditation The Bachelor of Science program in Aerospace Engineering at Syracuse University is accredited by the Engineering Accreditation Commission of ABET, http

  14. BS in Aerospace Engineering ABET Accreditation The Bachelor of Science program in Aerospace Engineering at Syracuse University is accredited by

    E-Print Network [OSTI]

    Mohan, Chilukuri K.

    the impact of engineering solutions in a global, economic, environmental, and societal context (iBS in Aerospace Engineering ABET Accreditation The Bachelor of Science program in Aerospace Engineering at Syracuse University is accredited by the Engineering Accreditation Commission of ABET

  15. The CU Aerospace / VACCO Propulsion Unit for CubeSats (PUC) is a complete high-performance and

    E-Print Network [OSTI]

    Carroll, David L.

    such as solar panels and magnetic torquers. For increased performance, or to meet customer specific missionThe CU Aerospace / VACCO Propulsion Unit for CubeSats (PUC) is a complete high necessary propulsion subsystems, including controller, power processing unit, micro-cavity discharge

  16. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  17. Aerospace & Energetics Research Program -University of Washington Plasma Dynamics Group

    E-Print Network [OSTI]

    Shumlak, Uri

    - University of Washington Plasma Dynamics Group q The Boltzmann equation is seven dimensional. qAerospace & Energetics Research Program - University of Washington Plasma Dynamics Group Plasma Research Program - University of Washington Plasma Dynamics Group Abstract Many current plasma simulation

  18. aerospace mechanisms symposium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Aerospace Engineering We present an arbitrary high-order quadrature- free, Runge for Engineering of Matter, Transport, and Energy. He received his B.S. in physics from Arizona...

  19. adaptive aerospace tools: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and will remain so for the foreseeable future. Airbus is the main Euro- pean aerospace company in the civil sector, however a large part of the work is performed at various...

  20. aerospace medical panel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: Rprint & Copyright @ by Aerospace Medical Association, Alexandria, V A w. P. ROACH, M.S., Ph.D., M, B.S., and CRAIG M. BRAMLETTE, A.S. ROACH WP, ROGERS ME, ROCKWELL BA,...

  1. aerospace personal cooling: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is a reliable and fast NDT-technique that can be applied for a wide range of testing problems in aerospace applications. It is robust and sensitive enough to be used in...

  2. Department of Mechanical and Aerospace Engineering Updated: Spring 2012

    E-Print Network [OSTI]

    Krstic, Miroslav

    Department of Mechanical and Aerospace Engineering Updated: Spring 2012 MECHANICAL ENGINEERING TECHNICAL ELECTIVES Mechanical Engineering Majors are required to complete four (4) Technical Electives Century Energy Technologies II MAE 135 Computational Mechanics MAE 180A Spacecraft Guidance MAE 181 Space

  3. West Virginia University 1 Department of Mechanical and Aerospace

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    , solid mechanics, energy systems, engineering materials, automatic controls, mechatronicsWest Virginia University 1 Department of Mechanical and Aerospace Engineering Degrees Offered · Master of science in mechanical engineering · Master of science in engineering with a major in mechanical

  4. Risk from network disruptions in an aerospace supply chain

    E-Print Network [OSTI]

    Wilson, Bryan K. (Bryan Keith)

    2010-01-01T23:59:59.000Z

    This thesis presents methods for determining the effects of risk from disruptions using an aerospace supply chain as the example, primarily through the use of a computer simulation model. Uncertainty in the current marketplace ...

  5. CARLETON UNIVERSITY Department of Mechanical and Aerospace Engineering

    E-Print Network [OSTI]

    Dawson, Jeff W.

    ............................................................................................................................................... 3 FLUID MECHANICS, COMBUSTION AND BIOMEDICAL ENGINEERING................................... 6 HEATCARLETON UNIVERSITY Department of Mechanical and Aerospace Engineering Funded Graduate Research - Graduate students under the direction of Prof. T. Pearce from Systems and Computer Engineering department

  6. Reduction of rework at a large aerospace manufacturer

    E-Print Network [OSTI]

    Lieberman, Jeremy A. (Jeremy Alan)

    2012-01-01T23:59:59.000Z

    It is an axiom of the manufacturing of any complex product that errors will occur that require repair or discard of said product. In building aircraft, Raptor Aerospace encounters and repairs numerous deviations from the ...

  7. Solid state power bus controllers for aerospace applications

    E-Print Network [OSTI]

    Villarreal, Terry Joseph

    1988-01-01T23:59:59.000Z

    SOLID STATE POWER BUS CONTROLLERS FOR AEROSPACE APPLICATIONS A Thesis by TERRY JOSEPH VILLARREAL Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE December 1988 Major Subject: Electrical Eny'neering SOLID STATE POWER BUS CONTROLLERS FOR AEROSPACE APPLICATIONS A Thesis TERRY JOSEPH VILLARREAL Approved as to style and content by: Mehrdad Ehsani (Chairman of Committee) Robert D. Nevels...

  8. Dynamic behavior analysis for a six axis industrial machining BISU Claudiu1,a

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    .). In the aerospace industry, robot starts to be used for complex applications such as drilling, riveting, fiberDynamic behavior analysis for a six axis industrial machining robot BISU Claudiu1,a , CHERIF Mehdi2-yves.knevez@u-bordeaux1.fr Abstract The six axis robots are widely used in automotive industry for their good

  9. Developing a 21st Century Aerospace Workforce

    E-Print Network [OSTI]

    Joel Cutcher-Gershenfeld

    2003-04-16T23:59:59.000Z

    Across the industry there are leaders at every level who are being challenged to think and act in new ways. The same is true for this commission. This can't be a "business as usual" review of the industry's status. As the ...

  10. New AB-Thermonuclear Reactor for Aerospace

    E-Print Network [OSTI]

    Alexander Bolonkin

    2007-06-14T23:59:59.000Z

    There are two main methods of nulcear fusion: inertial confinement fusion (ICF) and magnetic confinement fusion (MCF). Existing thermonuclear reactors are very complex, expensive, large, and heavy. They cannot achieve the Lawson creterion. The author offers an innovation. ICF has on the inside surface of the shell-shaped combustion chamber a covering of small Prism Reflectors (PR) and plasma reflector. These prism reflectors have a noteworthy advantage, in comparison with conventional mirror and especially with conventional shell: they multi-reflect the heat and laser radiation exactly back into collision with the fuel target capsule (pellet). The plasma reflector reflects the Bremsstrahlung radiation. The offered innovation decreases radiation losses, creates significant radiation pressure and increases the reaction time. The Lawson criterion increases by hundreds of times. The size, cost, and weight of a typical installation will decrease by tens of times. The author is researching the efficiency of these innovations. Keywords: Thermonuclear reactor, Multi-reflex AB-thermonuclear reactor, aerospace thermonuclear engine. This work is presented as paper AIAA-2006-7225 to Space-2006 Conference, 19-21 September, 2006, San Jose, CA, USA.

  11. Multistate analysis and design : case studies in aerospace design and long endurance systems

    E-Print Network [OSTI]

    Agte, Jeremy S. (Jeremy Sundermeyer)

    2011-01-01T23:59:59.000Z

    This research contributes to the field of aerospace engineering by proposing and demonstrating an integrated process for the early-stage, multistate design of aerospace systems. The process takes into early consideration ...

  12. Service bulletin inventory management and modeling for aerospace parts in customer service organization

    E-Print Network [OSTI]

    Pardede, Erna K. (Erna Kertasasmita)

    2013-01-01T23:59:59.000Z

    The Customer Service department of United Technology Corporation (UTC) Aerospace System is primarily responsible for providing spare parts, repair services, training, and technical support for products that UTC Aerospace ...

  13. Bachelor of Science Aerospace Administration and Operations

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    industry. Admission Requirements Transferring to OSU-Tulsa OSU-Tulsa offers only junior and senior on the Tulsa campus. Check with the Advisement Center (http://www.osu- tulsa.okstate.edu/academics/advisement.asp) for exceptions. If you would like to complete your full four-year degree in Tulsa, you can take your first two

  14. Biomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial | Mechanical | Petroleum Careers in Industrial Engineering

    E-Print Network [OSTI]

    Glowinski, Roland

    | Mechanical | Petroleum Careers in Industrial Engineering Manufacturing, service and retail industries hireBiomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial a significant number of industrial engineers. Specific industries include automobile manufacturers, electronics

  15. 2001 -4380 -0 Aerospace EngineeringIto, Ward, and Valasek ROBUST DYNAMIC INVERSION

    E-Print Network [OSTI]

    Valasek, John

    2001 - 4380 - 0 Aerospace EngineeringIto, Ward, and Valasek ROBUST DYNAMIC INVERSION CONTROLLER DESIGN FOR THE X-38 AIAA-2001-4380 Dai Ito, Dr. Donald T. Ward, and Dr. John Valasek Aerospace Engineering AIAA GN&C Conference, Montreal, Canada 9 August 2001 #12;2001 - 4380 - 1 Aerospace Engineering

  16. 1Mechanical, Aerospace and Nuclear Engineering nacThe Gaerttner Laboratory RPI LINAC Facility

    E-Print Network [OSTI]

    Danon, Yaron

    Nuclear Criticality Safety Program Conference April 27, 2011 #12;2Mechanical, Aerospace and Nuclear, Aerospace and Nuclear Engineering nacThe Gaerttner Laboratory RPI LINAC Facility Nuclear Criticality Safety1Mechanical, Aerospace and Nuclear Engineering nacThe Gaerttner Laboratory RPI LINAC Facility

  17. UNIVERSITY OF STRATHCLYDE Lecturer/Senior Lecturer/Reader in Mechanical or Aerospace Engineering

    E-Print Network [OSTI]

    areas: space/aerospace systems; micro/nano fluids and flows; energy engineering; or the mechanicsUNIVERSITY OF STRATHCLYDE Lecturer/Senior Lecturer/Reader in Mechanical or Aerospace Engineering Department of Mechanical & Aerospace Engineering Salary range: £33,320 - £58,157, open contract (with 3-year

  18. Aerospace & Energetics Research Program -University of Washington Plasma Dynamics Group

    E-Print Network [OSTI]

    Shumlak, Uri

    of Washington Plasma Dynamics Group q The Boltzmann equation is seven dimensional. q As a consequence plasmaAerospace & Energetics Research Program - University of Washington Plasma Dynamics Group Plasma Plasma Dynamics Group Abstract Many current plasma simulation codes are based on the magnetohydrodynamic

  19. Applying Semantic Web Technologies to Knowledge Sharing in Aerospace Engineering

    E-Print Network [OSTI]

    Ciravegna, Fabio

    Applying Semantic Web Technologies to Knowledge Sharing in Aerospace Engineering A.-S. Dadzie , R. This paper details an integrated methodology to optimise Knowledge reuse and sharing, illustrated with a use of Knowledge from legacy documents via automated means, or directly in systems interfacing with Knowledge

  20. advanced aerospace materials: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aerospace materials First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Recent Advances in the Analysis and...

  1. aerospace structural materials: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aerospace structural materials First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 DEPARTMENT OF...

  2. aerospace materials: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aerospace materials First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 DEPARTMENT OF MECHANICAL,...

  3. Honors and Awards 2008-2009 Department of Aerospace Engineering

    E-Print Network [OSTI]

    Lin, Zhiqun

    Honors and Awards 2008-2009 Department of Aerospace Engineering D. Chimenti: Invited plenary Base, Florida H. Hu: 2009 AIAA Best Paper Award, AIAA Applied Aerodynamics Technical Committee A. Laws: Deans' Staff Excellence Award, College of Engineering, ISU V. Levitas: Einstein Award for Scientific

  4. Herek Clack Department of Mechanical, Materials, and Aerospace Engineering

    E-Print Network [OSTI]

    Saniie, Jafar

    Herek Clack Department of Mechanical, Materials, and Aerospace Engineering You could say, Clack has developed a new combustion laboratory at IIT and established a research group focusing on reacting, multiphase, and turbulent flows; and mitigation of toxic products of combustion. An expert

  5. Reprint & Copyright by Aerospace Medical Association, Washington, DC

    E-Print Network [OSTI]

    Reprint & Copyright ©by Aerospace Medical Association, Washington, DC TECHNICAL NOTE Reflectance.EPICS Biomedical Engineering and Science Institute and Department of Electrical and Computer Engineering, Drexel and pulsatile and mean Doppler velocities were examined as predictors of impending peripheral light loss (PLL

  6. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Obeying Environmental Laws Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the...

  7. 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 4-7 Jan 2011, Orlando, Florida Momentum Transfer in Millisecond Periodic-Pulsed

    E-Print Network [OSTI]

    Liu, Feng

    to measure crossflow velocity field around the body in atmospheric air. The periodic-pulsed discharges have- tions of induced maximum crossflow velocity and maximum magnitude of axial-vorticity in the neighborhood actuation q = velocity component in crossflow plane r, = polar coordinates at body center, measured from

  8. Uranium industry annual 1998

    SciTech Connect (OSTI)

    NONE

    1999-04-22T23:59:59.000Z

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

  9. Uranium industry annual 1994

    SciTech Connect (OSTI)

    NONE

    1995-07-05T23:59:59.000Z

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

  10. Micro -Thermonuclear AB-Reactors for Aerospace

    E-Print Network [OSTI]

    Alexander Bolonkin

    2007-01-08T23:59:59.000Z

    The author offers several innovations that he first suggested publicly early in 1983 for the AB multi-reflex engine, space propulsion, getting energy from plasma, etc. (see: A. Bolonkin, Non-Rocket Space Launch and Flight, Elsevier, London, 2006, Chapters 12, 3A). It is the micro-thermonuclear AB-Reactors. That is new micro-thermonuclear reactor with very small fuel pellet that uses plasma confinement generated by multi-reflection of laser beam or its own magnetic field. The Lawson criterion increases by hundreds of times. The author also suggests a new method of heating the power-making fuel pellet by outer electric current as well as new direct method of transformation of ion kinetic energy into harvestable electricity. These offered innovations dramatically decrease the size, weight and cost of thermonuclear reactor, installation, propulsion system and electric generator. Non-industrial countries can produce these researches and constructions. Currently, the author is researching the efficiency of these innovations for two types of the micro-thermonuclear reactors: multi-reflection reactor (ICF) and self-magnetic reactor (MCF).

  11. Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April, 2006 (draft) 1 MEASURING INDUSTRIAL ENERGY SAVINGS

    E-Print Network [OSTI]

    Kissock, Kelly

    Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April, 2006 (draft) 1 MEASURING INDUSTRIAL ENERGY SAVINGS Kelly Kissock and Carl Eger Department of Mechanical and Aerospace a general method for measuring industrial energy savings and demonstrates the method using a case study from

  12. Industrial Engineering Industrial Advisory Board

    E-Print Network [OSTI]

    Gelfond, Michael

    Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

  13. Internship Contract (Includes Practicum)

    E-Print Network [OSTI]

    Thaxton, Christopher S.

    Internship Contract (Includes Practicum) Student's name-mail: _________________________________________ Internship Agency Contact Agency Name: ____________________________________ Address-mail: __________________________________________ Location of Internship, if different from Agency: ________________________________________________ Copies

  14. ARM - Field Campaign - Unmanned Aerospace Vehicle (UAV) IOP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa- PolarizationgovCampaignsSummer Single Column ModelRSPgovCampaignsUnmanned Aerospace

  15. Pump apparatus including deconsolidator

    DOE Patents [OSTI]

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07T23:59:59.000Z

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  16. A Long, Contingent Path to Comparative Advantage: Industrial Policy and the Japanese Iron and Steel Industry, 1900-1973

    E-Print Network [OSTI]

    ELBAUM, BERNARD

    2006-01-01T23:59:59.000Z

    comparative advantage, and heavy industry, favored by moreits spending in heavy industries, including militarilylight as well as heavy industries, recommendations from both

  17. Uranium industry annual 1996

    SciTech Connect (OSTI)

    NONE

    1997-04-01T23:59:59.000Z

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  18. Percentage of Total Natural Gas Industrial Deliveries included in Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site. IfProved(MillionPrice (Percent) YearPricePricePipeline and

  19. Percentage of Total Natural Gas Industrial Deliveries included in Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site. IfProved(MillionPrice (Percent) YearPricePricePipeline

  20. JOURNAL OF AEROSPACE COMPUTING, INFORMATION, AND COMMUNICATION Vol. 6, March 2009

    E-Print Network [OSTI]

    Valasek, John

    control the shape of aerospace structures has spawned the use of shape memory alloy actuatorsJOURNAL OF AEROSPACE COMPUTING, INFORMATION, AND COMMUNICATION Vol. 6, March 2009 Reinforcement Learning for Characterizing Hysteresis Behavior of Shape Memory Alloys Kenton Kirkpatrick and John Valasek

  1. Health Monitoring of Aging Aerospace Structures using the Electro-Mechanical Impedance Method

    E-Print Network [OSTI]

    Giurgiutiu, Victor

    1 Health Monitoring of Aging Aerospace Structures using the Electro- Mechanical Impedance Method-mechanical (E/M) impedance method for health monitoring of aging aerospace structures. As a nondestructive aircraft, health monitoring, statistics, neural networks, 1. INTRODUCTION Structural health monitoring (SHM

  2. Department of Mechanical, Materials and Aerospace Engineering IIT Graduate Bulletin 2006-2008

    E-Print Network [OSTI]

    Heller, Barbara

    , and thermal sciences. The department also offers programs in materials science and engineering241 Department of Mechanical, Materials and Aerospace Engineering IIT Graduate Bulletin 2006-2008 Department of Mechanical, Materials and Aerospace Engineering 243 Engineering 1 Building 10 W. 32nd St

  3. Mechanical & Aerospace Engineering Dept. West Virginia University, Oct. 2nd, 2008

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Mechanical & Aerospace Engineering Dept. West Virginia University, Oct. 2nd, 2008 www STUDENTS in MECHANICAL and AEROSPACE ENGINEERING #12;OBJECTIVES · Overview of Departmental Policies · M.S. & Ph.D. Degrees in Energy Materials ­ Multidisciplinary program based in the MAE dept ­ Five

  4. Living Expenses (includes approximately

    E-Print Network [OSTI]

    Maroncelli, Mark

    & engineering programs All other programs Graduate: MBA/INFSY at Erie & Harrisburg (12 credits) Business Guarantee 3 (Does not include Dependents Costs4 ) Altoona, Berks, Erie, and Harrisburg 12-Month Estimated

  5. Department Name Degrees Phone Email Website Aerospace Engineering MS, PhD 303-492-6416 aerograd@colorado.edu http://www.colorado.edu/aerospace

    E-Print Network [OSTI]

    Mulligan, Jane

    Department Name Degrees Phone Email Website Aerospace Engineering MS, PhD 303-492-6416 aerograd@colorado.edu http://www.colorado.edu/aerospace Anthropology MA, PhD 303-492-7947 anthro@colorado.edu http://www.colorado.edu/anthropology Applied Mathematics MS, PhD 303-492-1238 amgradco@colorado.edu http://amath.colorado.edu Art and Art

  6. Plasma Immersion Ion Implantation with Solid Targets for Space and Aerospace Applications

    SciTech Connect (OSTI)

    Oliveira, R. M.; Goncalves, J. A. N.; Ueda, M.; Silva, G. [National Institute for Space Research, PO Box 515, ZIP 12227-010 Sao Jose dos Campos, Sao Paulo (Brazil); Baba, K. [Industrial Technology Center of Nagasaki, 2-1303-8, Ikeda, Omura Nagasaki 856-0026 (Japan)

    2009-01-05T23:59:59.000Z

    This paper describes successful results obtained by a new type of plasma source, named as Vaporization of Solid Targets (VAST), for treatment of materials for space and aerospace applications, by means of plasma immersion ion implantation and deposition (PIII and D). Here, the solid element is vaporized in a high pressure glow discharge, being further ionized and implanted/deposited in a low pressure cycle, with the aid of an extra electrode. First experiments in VAST were run using lithium as the solid target. Samples of silicon and aluminum alloy (2024) were immersed into highly ionized lithium plasma, whose density was measured by a double Langmuir probe. Measurements performed with scanning electron microscopy (SEM) showed clear modification of the cross-sectioned treated silicon samples. X-ray photoelectron spectroscopy (XPS) analysis revealed that lithium was implanted/deposited into/onto the surface of the silicon. Implantation depth profiles may vary according to the condition of operation of VAST. One direct application of this treatment concerns the protection against radiation damage for silicon solar cells. For the case of the aluminum alloy, X-ray diffraction analysis indicated the appearance of prominent new peaks. Surface modification of A12024 by lithium implantation/deposition can lower the coefficient of friction and improve the resistance to fatigue of this alloy. Recently, cadmium was vaporized and ionized in VAST. The main benefit of this element is associated with the improvement of corrosion resistance of metallic substrates. Besides lithium and cadmium, VAST allows to performing PIII and D with other species, leading to the modification of the near-surface of materials for distinct purposes, including applications in the space and aerospace areas.

  7. Dynamic behavior analysis for a six axis industrial machining robot

    E-Print Network [OSTI]

    Bisu, Claudiu-Florinel; Gérard, Alain; K'Nevez, Jean-Yves

    2012-01-01T23:59:59.000Z

    The six axis robots are widely used in automotive industry for their good repeatability (as defined in the ISO92983) (painting, welding, mastic deposition, handling etc.). In the aerospace industry, robot starts to be used for complex applications such as drilling, riveting, fiber placement, NDT, etc. Given the positioning performance of serial robots, precision applications require usually external measurement device with complexes calibration procedure in order to reach the precision needed. New applications in the machining field of composite material (aerospace, naval, or wind turbine for example) intend to use off line programming of serial robot without the use of calibration or external measurement device. For those applications, the position, orientation and path trajectory precision of the tool center point of the robot are needed to generate the machining operation. This article presents the different conditions that currently limit the development of robots in robotic machining applications. We ana...

  8. Lean Transformation in the U.S. Aerospace Industry: Appreciating Interdependent Social and Technical Systems

    E-Print Network [OSTI]

    CUTCHER-GERSHENFELD, JOEL

    2003-05-02T23:59:59.000Z

    Lean practices and principles build on a half-century of successive initiatives aimed at transforming social and technical systems in organizations. While they are send as ...

  9. Getting ahead in sourcing through benchmarking and system dynamic analysis : an aerospace industry perspective

    E-Print Network [OSTI]

    Chang, Yue (Yue Cathy)

    2006-01-01T23:59:59.000Z

    Sourcing and purchasing have received renewed attention recently as many supply chains challenge themselves to meet cost reduction goals. These challenges are especially apparent in the high-mix, low volume, and often ...

  10. The Department of Aerospace Engineering Moving The Wind Industry With Technology

    E-Print Network [OSTI]

    Demirel, Melik C.

    in the areas of jet noise and nozzle aerodynamics. He received his Bachelor's degree from N.C. State University with a current capability of 60 GW generated by 45,000 turbine. That is enough energy to power the equivalent and acoustics of the ro- tor and detailed concepts for wind turbine sound mitigation that are under development

  11. Applying Service Oriented Architecture in the Aerospace Industry Jurga Kazlauskaite, Arsalan Minhas, F. H. Vogt

    E-Print Network [OSTI]

    Turau, Volker

    the need for verification and programmatic support at every step of development. Verification of produced at the Software Engineering Institute of the East China Normal University in Shanghai, China. He received his Ph Architectures for distri- buted product lifecycle management applications in cross enterprise environments

  12. THERMODYNAMIC MODELING AND EXPERIMENTAL INVESTIGATION OF BRAZED JOINTS USED IN AEROSPACE INDUSTRY

    E-Print Network [OSTI]

    Medraj, Mamoun

    of these deleterious phases is transient liquid phase bonding (TLP), also known as diffusion brazing. The diffusion and experimental investigations. It was observed that the boron diffusion model and migrating solid were used as base metals; however, silicon diffusion model was more accurate for stainless steel base

  13. Labor Relations and the Development of the Aerospace Industry in Mexico

    E-Print Network [OSTI]

    Salinas, Javier

    2014-01-01T23:59:59.000Z

    Metropolitana, Azcapotzalco. México. Lçopez, M. (2010)la ciudad de Querétaro, Qro. , México el 12/10/2010. Lucena,Sociología del Trabajo. FCE. México. ProMéxico (2014) Mapa

  14. Framework for the selection of acquisition targets applied in the commercial aerospace industry

    E-Print Network [OSTI]

    Tajima, Michael (Michael Ken)

    2010-01-01T23:59:59.000Z

    Acquisitions are costly, even the ones that never happen. They require a significant commitment of resources involving multi-disciplinary teams examining all aspects of a business. This can come at a significant cost if ...

  15. May 12, 2011, Visiting Speakers Program Events - Aerospace Industry: Challenges and Combating Counterfeit Parts

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment3311, 3312), October 20122 DOEDepartmentJune 29, 2012 VIA EMAIL

  16. Energy conservation guide for industrial processes

    SciTech Connect (OSTI)

    Not Available

    1981-01-01T23:59:59.000Z

    Th Energy Conservation Guide for industrial processes has simple instructions to survey energy use areas at Navy industrial activities like shipyards, Naval air rework facilities and government owned, contractor operated (GOCO) plants. This guide includes information and procedures on: organizing and conducting an industrial energy survey; evaluating purchased energy data; descriptions of industrial systems; and evaluation of industrial processes for conservation.

  17. Uranium Industry Annual, 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-28T23:59:59.000Z

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

  18. Uranium industry annual 1995

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

  19. The dynamics of supply chains in the automotive industry

    E-Print Network [OSTI]

    Braese, Niklas

    2005-01-01T23:59:59.000Z

    This thesis looks at how supply chains in the automotive industry operate from the perspective of the manufacturers. The study includes the industry structure, the top players in the industry, factors that drive the industry, ...

  20. Magnetic Processing – A Pervasive Energy Efficient Technology for Next Generation Materials for Aerospace and Specialty Steel Markets

    SciTech Connect (OSTI)

    Mackiewicz-Ludtka, G.; Ludtka, G.M.; Ray, P. (Carpenter Technologies, Inc.); Magee, J. (Carpenter Technologies, Inc.)

    2010-09-10T23:59:59.000Z

    Thermomagnetic Magnetic Processing is an exceptionally fertile, pervasive and cross-cutting technology that is just now being recognized by several major industry leaders for its significant potential to increase energy efficiency and materials performance for a myriad of energy intensive industries in a variety of areas and applications. ORNL has pioneered the use and development of large magnetic fields in thermomagnetically processing (T-MP) materials for altering materials phase equilibria and transformation kinetics. ORNL has discovered that using magnetic fields, we can produce unique materials responses. T-MP can produce unique phase stabilities & microstructures with improved materials performance for structural and functional applications not achieved with traditional processing techniques. These results suggest that there are unprecedented opportunities to produce significantly enhanced materials properties via atomistic level (nano-) microstructural control and manipulation. ORNL (in addition to others) have shown that grain boundary chemistry and precipitation kinetics are also affected by large magnetic fields. This CRADA has taken advantage of ORNL’s unique, custom-designed thermo-magnetic, 9 Tesla superconducting magnet facility that enables rapid heating and cooling of metallic components within the magnet bore; as well as ORNL’s expertise in high magnetic field (HMF) research. Carpenter Technologies, Corp., is a a US-based industrial company, that provides enhanced performance alloys for the Aerospace and Specialty Steel products. In this CRADA, Carpenter Technologies, Corp., is focusing on applying ORNL’s Thermomagnetic Magnetic Processing (TMP) technology to improve their current and future proprietary materials’ product performance and open up new markets for their Aerospace and Specialty Steel products. Unprecedented mechanical property performance improvements have been demonstrated for a high strength bainitic alloy industrial/commercial alloy that is envisioned to provide the potential for new markets for this alloy. These thermomechanical processing results provide these alloys with a major breakthrough demonstrating that simultaneous improvements in yield strength and ductility are achieved: 12 %, 10%, 13%, and 22% increases in yield strength, elongation, reduction-in-area, and impact energy respectively. In addition, TMP appears to overcome detrimental chemical homogeneity impacts on uniform microstructure evolution.

  1. Additive Manufacturing in China: Aviation and Aerospace Applications (Part 2)

    E-Print Network [OSTI]

    ANDERSON, Eric

    2013-01-01T23:59:59.000Z

    Analysis May 2013 Additive Manufacturing in China: Aviationan overview of China’s additive manufacturing industry wasmilitary achievements in additive manufacturing. 2 Initial

  2. Additive Manufacturing in China: Aviation and Aerospace Applications (Part 2)

    E-Print Network [OSTI]

    ANDERSON, Eric

    2013-01-01T23:59:59.000Z

    Bulletin Analysis May 2013 Additive Manufacturing in China:an overview of China’s additive manufacturing industry wasmilitary achievements in additive manufacturing. 2 Initial

  3. Doctor of Engineering internship experience at Ball Aerospace Systems Division, Boulder, Colorado: an internship report

    E-Print Network [OSTI]

    Larson, Wiley J.

    2013-03-13T23:59:59.000Z

    This monograph describes the author's internship experiences at Ball Aerospace Systems Division, Boulder, Colorado. A system-level spacecraft design procedure is presented. It describes a spacecraft design flow with emphasis...

  4. Implementation Planning for the Introduction of Knowledge Management in an Aerospace Engineering Organization

    E-Print Network [OSTI]

    Hughes, Neil

    2013-05-17T23:59:59.000Z

    The availability of information within an aerospace organization is required for engineers to perform activities. As information is considered, it’s the experience of the engineer that allows information to become knowledge for use. Knowledge...

  5. An Approach to Analyze Tradeoffs for Aerospace System Design and Operation

    E-Print Network [OSTI]

    O'Neill, Gregory

    2012-11-01T23:59:59.000Z

    There are important tradeoffs that need to be considered for the design and operation of aerospace systems. In addition to tradeoffs, there may also be multiple stakeholders of interest to the system and each may have ...

  6. An approach to analyze tradeoffs for aerospace system design and operation

    E-Print Network [OSTI]

    O'Neill, Michael Gregory

    2013-01-01T23:59:59.000Z

    There are important tradeoffs that need to be considered for the design and operation of aerospace systems. In addition to tradeoffs, there may also be multiple stakeholders of interest to the system and each may have ...

  7. Raman P. Singh School of Mechanical and Aerospace Engineering Phone (Tulsa): 918.594.8155

    E-Print Network [OSTI]

    Ghajar, Afshin J.

    Raman P. Singh School of Mechanical and Aerospace Engineering Phone (Tulsa): 918.594.8155 Oklahoma State University Phone (Stillwater): 405.744.1825 700 N. Greenwood Avenue, Tulsa, OK 74106 raman

  8. Design of a small fast steering mirror for airborne and aerospace applications

    E-Print Network [OSTI]

    Boulet, Michael Thomas

    2008-01-01T23:59:59.000Z

    This thesis presents the analysis and design of a small advanced fast steering mirror (sAFSM) for airborne and aerospace platforms. The sAFSM provides feedback-controlled articulation of two rotational axes for precision ...

  9. Aerospace and Mechanical Engineers design and build unique, complex mechanical, optical, and electronic

    E-Print Network [OSTI]

    Rohs, Remo

    20 Aerospace and Mechanical Engineers design and build unique, complex mechanical, optical Engineering students conduct extensive basic and applied research within and crossing usual disciplinary vehicle aerodynamics, combustion, robotics, heat transfer and nonlinear dynamics. In addition, recent

  10. Aerospace and Mechanical Engineers design and build unique, complex mechanical, optical, and

    E-Print Network [OSTI]

    Rohs, Remo

    20 Aerospace and Mechanical Engineers design and build unique, complex mechanical, optical Engineering students conduct extensive basic and applied research within and crossing usual disciplinary vehicle aerodynamics, combustion, robotics, heat transfer and nonlinear dynamics. In addition, recent

  11. OTHER INDUSTRIES

    Broader source: Energy.gov [DOE]

    AMO funded research results in novel technologies in diverse industries beyond the most energy intensive ones within the U.S. Manufacturing sector. These technologies offer quantifiable energy...

  12. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

    1998-06-09T23:59:59.000Z

    A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

  13. Advanced Manufacturing Office (Formerly Industrial Technologies Program)

    E-Print Network [OSTI]

    Advanced Manufacturing Office (Formerly Industrial Technologies Program) Leo Christodoulou Jamie August 11, 2011 #12;Background and Opportunity Background Industry accounts for 30% of energy consumption-value industries such as the renewable energy industry. Example materials include low-cost carbon fiber, low

  14. Industry Partners Panel

    Broader source: Energy.gov [DOE]

    Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

  15. Industrial Energy Use Indices

    E-Print Network [OSTI]

    Hanegan, A.; Heffington, W. M.

    2007-01-01T23:59:59.000Z

    of variations for all industry types in warm versus cold regions of the U.S. generally is greater than unity. Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used...

  16. australian petroleum industry: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (VOCs) and odors from petrochemical industrial complex, including China Petroleum company (CPC),Renwu and Dazher petrochemical industrial parks, causes poor (more) Yang,...

  17. Appears in Proceedings of the 1997 IEEE Aerospace Conference, Aspen, CO, February 1997. DSS2 6 0 1 2 3 0 2 1 0

    E-Print Network [OSTI]

    Schaffer, Steven

    Appears in Proceedings of the 1997 IEEE Aerospace Conference, Aspen, CO, February 1997. DSS­2 6 0 1 #12; Appears in Proceedings of the 1997 IEEE Aerospace Conference, Aspen, CO, February 1997

  18. Appears in Proceedings of the 1997 IEEE Aerospace Conference, Aspen, CO, February 1997. DSS-2 6 0 1 2 3 0 2 1 0

    E-Print Network [OSTI]

    Schaffer, Steven

    Appears in Proceedings of the 1997 IEEE Aerospace Conference, Aspen, CO, February 1997. DSS-2 6 0 1 #12;Appears in Proceedings of the 1997 IEEE Aerospace Conference, Aspen, CO, February 1997

  19. To be published in IEEE Aerospace Conference Proceedings, 2003, Cat No. 0-7803-7651-X/03/$17.00 2003 IEEE Planar REDOX and Conductivity Sensors

    E-Print Network [OSTI]

    Kounaves, Samuel P.

    To be published in IEEE Aerospace Conference Proceedings, 2003, Cat No. 0-7803-7651-X/03 are AeroRedox2C14 - 1 #12;To be published in IEEE Aerospace Conference Proceedings, 2003, Cat No. 0. BIOGRAPHIES 1. INTRODUCTION This paper extends the work reported at last year's IEEE Aerospace conference

  20. Coal industry annual 1993

    SciTech Connect (OSTI)

    Not Available

    1994-12-06T23:59:59.000Z

    Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

  1. College of Engineering | Mechanical and Industrial Engineering Department

    E-Print Network [OSTI]

    Mountziaris, T. J.

    College of Engineering | Mechanical and Industrial Engineering Department Are you up for a challenge? In the Mechanical and Industrial Engineering Innovation Shop at UMass Amherst, we challenge, instruments, and computers to support mechanical and industrial engineering projects ­ including all

  2. Research Projects in Industrial Technology.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration. Industrial Technology Section.

    1990-06-01T23:59:59.000Z

    The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the industrial sector, as well as other sectors, in its 1986 Power Plan. Specifically, the Council recommended that BPA operate a research and development program in conjunction with industry to determine the potential costs and savings from efficiency improvements in industrial processes which apply to a wide array of industrial firms.'' The section, composed of multidisciplinary engineers, provides technical support to the Industrial Programs Branch by designing and carrying out research relating to energy conservation in the industrial sector. The projects contained in this booklet are arranged by sector --industrial, utility, and agricultural -- and, within each sector, chronologically from ongoing to completed, with those projects completed most recently falling first. For each project the following information is given: its objective approach, key findings, cost, and contact person. Completed projects also include the date of completion, a report title, and report number.

  3. EUROPEAN CONFERENCE FOR AEROSPACE SCIENCES Study on the eddy current damping of the spin dynamics of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    4TH EUROPEAN CONFERENCE FOR AEROSPACE SCIENCES Study on the eddy current damping of the spin consideration in this article, are impacted by torques generated by eddy currents as the conducting non, the permanent magnetic field from the magnetosphere generates eddy current in the spinning, conducting body

  4. FOB Undergoing Test and Alignment in FAS at Ball Aerospace OPTICAL TESTS AND ALIGNMENTS

    E-Print Network [OSTI]

    Schneider, Glenn

    FOB Undergoing Test and Alignment in FAS at Ball Aerospace OPTICAL TESTS AND ALIGNMENTS After the FOB alignment is complete, and it passes environmental tests, it will be checked out in a second HST. The NICMOS FOB will relay simulated images from RAS/HOMS to a Photometrics CCD camera placed where the three

  5. Proceedings of AIAA Aerospace Sciences 20th ASME Wind Energy Symposium

    E-Print Network [OSTI]

    Sweetman, Bert

    Proceedings of AIAA Aerospace Sciences 20th ASME Wind Energy Symposium January 8­11, 2001, Reno, NV or implicitly, for a number of design codes--especially Copyright 2001 by The American Institute of Aeronautics, 1999) have begun to adopt these code formats, in analogy with long-standing practice in the building

  6. October 24, 2000 13:32 Proceedings of AIAA Aerospace Sciences

    E-Print Network [OSTI]

    Sweetman, Bert

    October 24, 2000 13:32 Proceedings of AIAA Aerospace Sciences 20th ASME Wind Energy Symposium, either explicitly or implicitly, for a number of design codes---especially Copyright 2001 by The American turbine standards (e.g., IEC, 1999) have begun to adopt these code formats, in analogy with long

  7. aerospace materials aluminum-lithium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aerospace materials aluminum-lithium First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 The effect of...

  8. R~print & Copyright @ by Aerospace Medical Association, Alexandria, V A

    E-Print Network [OSTI]

    Boppart, Stephen

    R~print & Copyright @ by Aerospace Medical Association, Alexandria, V A w. P. ROACH, M.S., Ph.D., M, B.S., and CRAIG M. BRAMLETTE, A.S. ROACH WP, ROGERS ME, ROCKWELL BA, BOPPART SA, STEIN CD, BRAMLETTE

  9. Dr. Brian L. Wardle Director, Nano-Engineered Composite aerospace STructures (NECST) Consortium

    E-Print Network [OSTI]

    Guiltinan, Mark

    are in the areas of nano-engineered advanced composites, bulk nanostructured materials, carbon-based material applications. Such hybrid advanced composites employ aligned carbon nanotubes (CNTs) to enhance laminate Composite aerospace STructures (NECST) Consortium and has served as the materials/structures lead on MIT

  10. 1Mechanical, Aerospace and Nuclear Engineering nacThe Gaerttner Laboratory Nuclear Data Research at RPI

    E-Print Network [OSTI]

    Danon, Yaron

    1Mechanical, Aerospace and Nuclear Engineering nacThe Gaerttner Laboratory Nuclear Data Research at RPI Y. Danon Rensselaer Polytechnic Institute, Troy, NY, 12180 RPI Nuclear Data (RND) 2011 Symposium for Criticality Safety and Reactor Applications Rensselaer Polytechnic Institute, April 27, 2011 #12;2Mechanical

  11. Sibley School of Mechanical & Aerospace Engineering -Graduate Post Graduate Activities Detail & History

    E-Print Network [OSTI]

    Lipson, Michal

    for comparison of activity and salary trends. Number Graduated: 69 Number Responded: 55 Response Rate: 80% (-N & Control Engineer (3) El Segundo CA Canadian Center for Aerospace* - N Test Engineer Calgary, Alberta Design Eng Lynn MA General Motors Fuel Cell Systems Analyst Honeoye Falls NY Gotham Consulting Partners

  12. EUROPEAN CONFERENCE FOR AEROSPACE SCIENCES Semi-intrusive and non-intrusive stochastic methods for

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    4TH EUROPEAN CONFERENCE FOR AEROSPACE SCIENCES Semi-intrusive and non-intrusive stochastic methods, 33400 Talence, France Abstract In this work we present semi-intrusive and non-intrusive techniques and non-intrusive. The intrusive technique consist to write an ad-hoc code by modifying an existing

  13. ME/AE 381 Mechanical and Aerospace Control Systems TWO FLYWHEEL SYSTEM LABORATORY

    E-Print Network [OSTI]

    Landers, Robert G.

    ME/AE 381 ­ Mechanical and Aerospace Control Systems TWO FLYWHEEL SYSTEM LABORATORY The objective of this laboratory is to design controllers that will regulate the angular position of a two­flywheel system (see tasks: 1. Ignoring Coulomb friction, determine a state­space description of the two flywheel system

  14. CIRQ: Qualitative fluid flow modelling for aerospace FMEA applications Neal Snooke

    E-Print Network [OSTI]

    Snooke, Neal

    M2 CIRQ: Qualitative fluid flow modelling for aerospace FMEA applications Neal Snooke Department- oped on top of the MCIRQ simulator with the aim to produce an automated FMEA for aircraft fuel systems similar to pre- viously developed automated electrical FMEA. Introduction This paper describes a circuit

  15. MIT and Automotive Industries MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    MIT and Automotive Industries MIT Industry Brief MIT's Industrial Liaison Program (ILP) can bring@ilp.mit.edu, or visit http://ilp-www.mit.edu. MIT and Automotive Industries The Massachusetts Institute of Technology (MIT) is a leading center of research and education on topics important to the automotive industry

  16. I I THE AEROSPACE CORPORATION I I,W. I

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling CorpNewCF INDUSTRIES,L? .-I I ,Is I I THE

  17. Pulp & Paper Industry- A Strategic Energy Review

    E-Print Network [OSTI]

    Stapley, C. E.

    The pulp and paper industry with yearly energy purchases of $5 billion per year including 50 billion kWh of power is one of the largest industrial energy producers in the U.S. However, structural changes in the global pulp and paper industry could...

  18. Scheduling optimization of a real flexible job shop including side ...

    E-Print Network [OSTI]

    2013-08-19T23:59:59.000Z

    Aug 19, 2013 ... The multitask cell at GKN Aerospace Sweden is a production cell con- ...... In order to demonstrate the effect of the squeezing procedure we solved ..... [13] J. Gao, M. Gen, L. Sun, Scheduling jobs and maintenances in flexible.

  19. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users The

  20. Industry @ ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users

  1. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFP »summerlectures [ICO]default Sign InIndustrial

  2. Stirling engines. (Latest citations from the Aerospace database). Published Search

    SciTech Connect (OSTI)

    Not Available

    1993-09-01T23:59:59.000Z

    The bibliography contains citations concerning fuel consumption, engine design and testing, computerized simulation, and lubrication systems relative to the Stirling cycle engine. Solar energy conversion research, thermodynamic efficiency, economics, and utilization for power generation and automobile engines are included. Materials used in Stirling engines are briefly evaluated. (Contains 250 citations and includes a subject term index and title list.)

  3. How Godzilla Ate Pittsburgh: The Long Rise of the Japanese Iron and Steel Industry, 1900–1973

    E-Print Network [OSTI]

    Bernard Elbaum

    2007-01-01T23:59:59.000Z

    comparative advantage, and heavy industry, favored by moreits spending in heavy industries, including militarilyafter all, had favored heavy industry ever since the 19th

  4. Coal Industry Annual 1995

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

  5. Coal industry annual 1996

    SciTech Connect (OSTI)

    NONE

    1997-11-01T23:59:59.000Z

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

  6. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  7. Industrial Decision Making 

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01T23:59:59.000Z

    and industrial investment decision-making. The paper will also address several important questions: • Why has industrial investment declined? • What is the outlook for industrial investment? • How can programs engage industry for future opportunities?...

  8. 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 4-7 Jan 2011, Orlando, Florida PIV Study on Steady and Periodic-Pulsed

    E-Print Network [OSTI]

    Liu, Feng

    chamber with one atmosphere pressure. The effects of pulse duty ratio on the induced maximum crossflow of pulsed actuation q = velocity component in crossflow plane r, = polar coordinates at body center profiles, e.g., flat plates,5­7 circular cylinder,8 NACA airfoils.9, 10 In this paper, the crossflow fields

  9. Department of Aerospace & Mechanical Engineering University of Southern California

    E-Print Network [OSTI]

    Zhou, Chongwu

    , an assistant professor at the USC Viterbi School of Engineering, has won a 2007 Faculty Early Career work has a range of applications, including the design of biologically inspired robotic vehicles

  10. 46th Aerospace Sciences Meeting, January 7-10, 2008, Reno, Nevada A Smart Wind Turbine Blade Using Distributed

    E-Print Network [OSTI]

    Nelson, Robert C.

    46th Aerospace Sciences Meeting, January 7-10, 2008, Reno, Nevada A Smart Wind Turbine Blade Using of "smart" wind turbine blades with integrated sensor-actuator-controller modules to im- prove

  11. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  12. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  13. Coal industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  14. Countries Gasoline Prices Including Taxes

    Gasoline and Diesel Fuel Update (EIA)

    Selected Countries (U.S. dollars per gallon, including taxes) Date Belgium France Germany Italy Netherlands UK US 51115 6.15 6.08 6.28 6.83 6.96 6.75 3.06 5415 6.14 6.06...

  15. Sponsorship includes: Agriculture in the

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    Sponsorship includes: · Agriculture in the Classroom · Douglas County Farm Bureau · Gifford Farm · University of Nebraska Agricultural Research and Development Center · University of Nebraska- Lincoln Awareness Coalition is to help youth, primarily from urban communities, become aware of agriculture

  16. Industrial Engineering Roles In Industry

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    , be they processes, products or systems · Typical focus areas include: ­ Project Management ­ Manufacturing ­ Quality Measurement and Improvement ­ Program Management ­ Ergonomics/Human Factors ­ Technology, Production and Distribution ­ Supply Chain Management ­ Productivity, Methods and Process Engineering

  17. 2001 4232 -0 Aerospace EngineeringBokadia and Valasek SEV ER E W EATH ER AV O ID AN C E

    E-Print Network [OSTI]

    Valasek, John

    2001 ­ 4232 -0 Aerospace EngineeringBokadia and Valasek SEV ER E W EATH ER AV O ID AN C E U SIN G IN FO R M ED H EU R ISTIC SEAR C H AIAA-2001-4232 Sangeeta Bokadia and Dr. John Valasek Aerospace Engineering AIAA GN&C Conference, Montreal, Canada 7 August 2001 #12;2001 ­ 4232 -1 Aerospace Engineering

  18. Comparing the Effects of Mutualism and Competition on Industrial Districts

    E-Print Network [OSTI]

    Hoyle, Rebecca B.

    stations. The diversity of industries situated in the region include food processing industries, oil refining, chemical and bio-chemical produc- tion facilities, as well as heavy industrial facilitiesComparing the Effects of Mutualism and Competition on Industrial Districts Christopher J.K. Knighta

  19. Industrial energy use indices

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10T23:59:59.000Z

    and colder are determined by annual average temperature weather data). Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used in the south of the U.S. iv... the average EUI for an energy type. The combined CoV from all of the industries considered, which accounts for 8,200 plants from all areas of the continental U.S., is 290%. This paper discusses EUIs and their variations based on electricity and natural...

  20. Electric Utility Industry Update

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

  1. Uranium industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-04-01T23:59:59.000Z

    This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

  2. Energy efficient industrialized housing research program

    SciTech Connect (OSTI)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; Mc Donald, M.; McGinn, B.; Ryan, P.; Sekiguchi, T. (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-01-01T23:59:59.000Z

    This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

  3. Delivered Energy Consumption Projections by Industry in the Annual Energy Outlook 2002

    Reports and Publications (EIA)

    2002-01-01T23:59:59.000Z

    This paper presents delivered energy consumption and intensity projections for the industries included in the industrial sector of the National Energy Modeling System.

  4. Workplace Charging Challenge Partner: Freudenberg-NOK Sealing...

    Broader source: Energy.gov (indexed) [DOE]

    technologies for a variety of markets including: aerospace; agriculture; appliance; automotive; construction; diesel engine; energy; food and beverage; heavy industry; and...

  5. Industrial energy-efficiency-improvement program

    SciTech Connect (OSTI)

    Not Available

    1980-12-01T23:59:59.000Z

    Progress made by industry toward attaining the voluntary 1980 energy efficiency improvement targets is reported. The mandatory reporting population has been expanded from ten original industries to include ten additional non-targeted industries and all corporations using over one trillion Btu's annually in any manufacturing industry. The ten most energy intensive industries have been involved in the reporting program since the signing of the Energy Policy and Conservation Act and as industrial energy efficiency improvement overview, based primarily on information from these industries (chemicals and allied products; primary metal industry; petroleum and coal products; stone, clay, and glass products; paper and allied products; food and kindred products; fabricated metal products; transportation equipment; machinery, except electrical; and textile mill products), is presented. Reports from industries, now required to report, are included for rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products. Additional data from voluntary submissions are included for American Gas Association; American Hotel and Motel Association; General Telephone and Electronics Corporation; and American Telephone and Telegraph Company. (MCW)

  6. Industry Analysis February 2013

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    technology ­ Clean tech/ clean technology #12;7 Industry Studies · IbisWorld ­ U.S. and global industry-Industries · Biodiesel ­ Biofuel ­ Alternate fuels ­ Green fuels ­ Renewable fuels/energy ­ Green energy ­ Green Canada, Census, Industry Canada, the OECD, European Union, IMF, World Bank, UN . . . Never pay for stats

  7. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    : Occupational biomechanics, work physiology, industrial ergonomics, environmental hygiene, cognitive engineeringINDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor

  8. A R&D Program for Advanced Industrial Heat Pumps 

    E-Print Network [OSTI]

    Hayes, A. J.

    1985-01-01T23:59:59.000Z

    The overall goal of the DOE Industrial Heat Pump Program is to foster research and development which will allow more efficient and economical recovery of waste energy in industry. Specifically, the program includes the identification of appropriate...

  9. A R&D Program for Advanced Industrial Heat Pumps

    E-Print Network [OSTI]

    Hayes, A. J.

    The overall goal of the DOE Industrial Heat Pump Program is to foster research and development which will allow more efficient and economical recovery of waste energy in industry. Specifically, the program includes the identification of appropriate...

  10. Impact of Electricity Deregulation on Industrial Assessment Strategies 

    E-Print Network [OSTI]

    Kasten, D. J.; Muller, M. R.; Pavlovic, F.

    2002-01-01T23:59:59.000Z

    of predictions in the electric industry is less mature than in the natural gas field. BIG OR SMALL EFFICENCY? As we mentioned earlier, many recommendations in industry do not improve efficiency. These include shifting operations to nighttime, demand...

  11. Industrial Revolutions: a graduate seminar Seminar in History of Technology

    E-Print Network [OSTI]

    Janssen, Michel

    recent industrialization in central Europe, Asia, and Latin America, also begun to reassess the concept of industrial revolution itself. This reassessment includes renewed attention to the scientific and technical

  12. Composites for Aerospace and Transportation As the fuel costs and environment concerns continue to increase, so does the demand for composite

    E-Print Network [OSTI]

    Li, Mo

    Composites for Aerospace and Transportation As the fuel costs and environment concerns continue to increase, so does the demand for composite materials for aerospace and transportation applications. Polymer composites are inherited lighter than their metallic counterparts resulting in significant weight reduction

  13. American Institute of Aeronautics and Astronautics, Infotech@Aerospace Conference, Paper No. 2005-7077 A Small Semi-Autonomous Rotary-Wing Unmanned Air

    E-Print Network [OSTI]

    -7077 1 A Small Semi-Autonomous Rotary-Wing Unmanned Air Vehicle (UAV) Scott D. Hanford* , Lyle N. Long System (GPS) will not work indoors, so other sensors will have to be used for indoor flight. The software. * NSF Fellow, Aerospace Engineering, Member AIAA, sdh187@psu.edu. Professor, Aerospace Engineering

  14. THE AEROSPACE

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj: ;;I : T' j-jE: i t 1 \.

  15. THE AEROSPACE

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj: ;;I : T' j-jE: i t 1 \.Suile

  16. Steam Path Audits on Industrial Steam Turbines 

    E-Print Network [OSTI]

    Mitchell, D. R.

    1992-01-01T23:59:59.000Z

    The electric utility industry has benefitted from steam path audits on steam turbines for several years. Benefits include the ability to identify areas of performance degradation during a turbine outage. Repair priorities can then be set...

  17. Alternate Cooling Methods for Industrial Plants

    E-Print Network [OSTI]

    Brown, M.; Moore, D.

    refrigerants has caused many plants to evaluate existing cooling methods. This paper presents case studies on alternate cooling methods used for space conditioning at several different industrial facilities. Methods discussed include direct and indirect...

  18. Energy efficient industrialized housing research program

    SciTech Connect (OSTI)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-12-01T23:59:59.000Z

    This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

  19. Emerging Opportunities in Industrial Electrification Technologies 

    E-Print Network [OSTI]

    Schmidt, P. S.

    1989-01-01T23:59:59.000Z

    in the manufacturing sector. Nearly half of manufacturing energy use was in the process industries, which include chemicals, petroleum products, pulp and paper, foods, textiles, and tobacco. Metals production, primarily aluminum and steel, accounted for about 21... %, and metals fabrication, including transportation, machinery, instrumentation and electronics, and other metal products, about 19%. The balance of about 14% was used in other non-metals industries, such as stone, clay, and glass, rubber and plastics...

  20. Industrial ecology Prosperity Game{trademark}

    SciTech Connect (OSTI)

    Beck, D.; Boyack, K.; Berman, M.

    1998-03-01T23:59:59.000Z

    Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

  1. Smart Materials and Adaptive Systems (3 Credits) Instructor Gregory Washington, Mechanical and Aerospace Engineering, UC Irvine (gnwashin@uci.edu)

    E-Print Network [OSTI]

    materials. Each subsection will result in a mini-design project. Text Course Notes preparedSmart Materials and Adaptive Systems (3 Credits) Instructor Gregory Washington, Mechanical and Aerospace Engineering, UC Irvine (gnwashin@uci.edu) Synopsis Modeling and control of smart materials

  2. Experimental and computational analysis of toughness anisotropy in an AA2139 Al-alloy for aerospace applications

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Experimental and computational analysis of toughness anisotropy in an AA2139 Al-alloy for aerospace applications T.F. Morgeneyer1,3 , J. Besson1 , H. Proudhon1 , M.J. Starink2 and I. Sinclair2 1

  3. AIAA Paper No. 2005-6982 InfoTech@Aerospace Conference, American Institute of Aeronautics and Astronautics, Sept., 2005

    E-Print Network [OSTI]

    and Astronautics, Sept., 2005 1 An Undergraduate Course in Unmanned Air Vehicles Lyle N. Long* , Scott D. Hanford of unmanned air vehicles. A two semester course at the senior-level in the Aerospace Engineering Department wing loading. In the second semester, teams of students worked together to build a larger aircraft from

  4. 44th Aerospace Sciences Meeting and Exhibit, January 9-12, 2006, Reno, Nevada Turbine Tip Clearance Flow Control

    E-Print Network [OSTI]

    Morris, Scott C.

    clearance between the rotor blade tips and outer casing. For a turbine, this clearance is on the order in an engine. In a turbine stage, blade rotation is caused by work extraction through turning of the post44th Aerospace Sciences Meeting and Exhibit, January 9-12, 2006, Reno, Nevada Turbine Tip Clearance

  5. ESA Workshop on Aerospace EMC Florence, Italy / 30 March 1 April 2009 A NOVEL WAY OF USING REVERBERATION CHAMBERS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ESA Workshop on Aerospace EMC Florence, Italy / 30 March ­ 1 April 2009 A NOVEL WAY OF USING of facility, among others, are often used nowadays for high frequency EMC radiated-immunity tests of using RCs for EMC testing with the generation of high-intensity deterministic temporal wavefronts inside

  6. The Industrial Electrification Program

    E-Print Network [OSTI]

    Harry, I. L.

    1982-01-01T23:59:59.000Z

    EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

  7. Electrotechnologies in Process Industries

    E-Print Network [OSTI]

    Amarnath, K. R.

    The Industrial Program at the Electric Power Research Institute (EPRI) promotes the efficient use of electricity to improve the competitive position of the American industry. Electrotechnologies that improve productivity, improve quality...

  8. and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    technologicalandlogisticssystemsbygathering, structuring, and managing information. Indus- trial engineers apply their knowledge not only45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle

  9. Demographics and industry returns

    E-Print Network [OSTI]

    Pollet, Joshua A.; DellaVigna, Stefano

    2007-01-01T23:59:59.000Z

    Industry category Child care Children’s books Children’s clothing Toysindustry Child care Children’s books Children’s clothing ToysIndustries are associated with high demand by children (child care, toys) and

  10. INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY

    E-Print Network [OSTI]

    Pohl, Karsten

    INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

  11. Industry Analysis October 2010

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    Different regulations for some industries in Canada, the U.S. and Europe ie. telecommunications, energy of energy, materials, industrial waste, byproducts #12;Contact Constance Adamson Stauffer Library adamsonc

  12. Geothermal Industry Partnership Opportunities

    Broader source: Energy.gov [DOE]

    Here you'll find links to information about partnership opportunities and programs for the geothermal industry.

  13. Digital Arts The digital arts major offers coursework on a range of topics including

    E-Print Network [OSTI]

    Miles, Will

    Florida's growing digital media industry and world-famous tourism industry. Our relationshipDigital Arts The digital arts major offers coursework on a range of topics including image in these departments should consider the digital arts minor as a way to investigate the creative applications

  14. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

  15. Microsoft PowerPoint - Highlights of the Industry Working Group...

    National Nuclear Security Administration (NNSA)

    identification format - Further concerns about both the upfront and maintenance costs Identified path forward and future engagement to include: - Creation of Industry...

  16. New Advanced System Utilizes Industrial Waste Heat to Power Water...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is crucial to ensuring their status as global competitors. Currently, most industries treat water to meet standards for direct discharge to surface water. The process includes a...

  17. HVAC component data modeling using industry foundation classes

    E-Print Network [OSTI]

    Bazjanac, Vladimir; Forester, James; Haves, Philip; Sucic, Darko; Xu, Peng

    2002-01-01T23:59:59.000Z

    HVAC Component Data Modeling Using Industry Foundationof a major extension of the HVAC part of the IFC data model.generic approach for handling HVAC components. This includes

  18. Industrial Dojo Program Fosters Industrial Internet Development...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE Launches Cloud Foundry 'Industrial Dojo,' Contributes to Open Source to Foster Continued...

  19. Industrial policy and the Indian electronics industry

    E-Print Network [OSTI]

    Love, Robert (Robert Eric)

    2008-01-01T23:59:59.000Z

    Recently, production within India's Electronics sector amounted to a low $12 billion when compared to the global output of $1400 billion. The slow growth in the local industry is often judged to be the result of late ...

  20. LANSCE | Lujan Center | Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Users The Lujan Neutron Scattering Center offers a diverse set of capabilities and instruments for industrial projects. Industrial users are invited to contact Fredrik...

  1. Challenges of electric power industry restructuring for fuel suppliers

    SciTech Connect (OSTI)

    NONE

    1998-09-01T23:59:59.000Z

    The purpose of this report is to provide an assessment of the changes in other energy industries that could occur as the result of restructuring in the electric power industry. This report is prepared for a wide audience, including Congress, Federal and State agencies, the electric power industry, and the general public. 28 figs., 25 tabs.

  2. The future steelmaking industry and its technologies

    SciTech Connect (OSTI)

    Fruehan, R.J.; Paxton, H.W.; Giarratani, F.; Lave, L. [Carnegie-Mellon Univ., Pittsburgh, PA (United States)]|[Pittsburgh Univ., PA (United States)

    1995-01-01T23:59:59.000Z

    The objective of this report is to develop a vision of the future steelmaking industry including its general characteristics and technologies. In addition, the technical obstacles and research and development opportunities for commercialization of these technologies are identified. The report is being prepared by the Sloan Steel Industry Competitiveness Study with extensive input from the industry. Industry input has been through AISI (American Iron and Steel Institute), SMA (Steel Manufacturers Association) and contacts with individual company executives and technical leaders. The report identifies the major industry drivers which will influence technological developments in the industry for the next 5--25 years. Initially, the role of past drivers in shaping the current industry was examined to help understand the future developments. Whereas this report concentrates on future technologies other major factors such as national and international competition, human resource management and capital concerns are examined to determine their influence on the future industry. The future industry vision does not specify specific technologies but rather their general characteristics. Finally, the technical obstacles and the corresponding research and development required for commercialization are detailed.

  3. A Survey of the U.S. ESCO Industry: Market Growth and Development from 2000 to 2006

    E-Print Network [OSTI]

    Hopper, Nicole; Goldman, Charles; Gilligan, Donald; Singer, Terry E.; Birr, Dave

    2007-01-01T23:59:59.000Z

    5 3.1 ESCO Industry21 Appendix A: ESCO Companies Included inSummary: Figure ES-1. ESCO Industry Activity: 1990-

  4. Benchmarks for industrial energy efficiency

    SciTech Connect (OSTI)

    Amarnath, K.R. [Electric Power Research Inst., Palo Alto, CA (United States); Kumana, J.D. [Linnhoff March, Inc., Houston, TX (United States); Shah, J.V. [Electric Power Research Inst., Pittsburgh, PA (United States). Chemicals and Petroleum Center

    1996-12-31T23:59:59.000Z

    What are the standards for improving energy efficiency for industries such as petroleum refining, chemicals, and glass manufacture? How can different industries in emerging markets and developing accelerate the pace of improvements? This paper discusses several case studies and experiences relating to this subject emphasizing the use of energy efficiency benchmarks. Two important benchmarks are discussed. The first is based on a track record of outstanding performers in the related industry segment; the second benchmark is based on site specific factors. Using energy use reduction targets or benchmarks, projects have been implemented in Mexico, Poland, India, Venezuela, Brazil, China, Thailand, Malaysia, Republic of South Africa and Russia. Improvements identified through these projects include a variety of recommendations. The use of oxy-fuel and electric furnaces in the glass industry in Poland; reconfiguration of process heat recovery systems for refineries in China, Malaysia, and Russia; recycling and reuse of process wastewater in Republic of South Africa; cogeneration plant in Venezuela. The paper will discuss three case studies of efforts undertaken in emerging market countries to improve energy efficiency.

  5. Using lean enterprise principles to drive quality and on time delivery to customers : a study of the Honeywell Aerospace Engine Assembly and Test Center of Excellence

    E-Print Network [OSTI]

    Jones, Andrea (Andrea Sieg)

    2006-01-01T23:59:59.000Z

    Honeywell Aerospace has been a leader in manufacturing high quality engines to customers for decades. With engine and auxiliary power unit (APU) growth of-9% in 2005, and projected growth similar or greater for 2006, ...

  6. Adapting to contradiction : competing models of organization in the United States organic foods industry

    E-Print Network [OSTI]

    Haedicke, Michael Anthony

    2008-01-01T23:59:59.000Z

    foods that many industry members felt were not compatible with organic agriculture, including ingredients made from genetically modified plants, irradiation

  7. Industrial Retrofits are Possible

    E-Print Network [OSTI]

    Stobart, E. W.

    . In April of 1987, the provincial government initiated a program to assist industrial energy users to reduce their energy usage. This program was designed to concentrate on an in-depth analysis of the complete operations of industrial plants... with the analyses being performed by specialist, private sector, engineering consultants. The program is in 3 phases providing an Ontario industrial plant with an Energy Analysis, a Feasibility Analysis Grant and a Project Engineering Design Grant...

  8. Presentations for Industry

    Broader source: Energy.gov [DOE]

    Learn energy-saving strategies from leading manufacturing companies and energy experts. The presentations are organized below by topic area. In addition, industrial energy managers, utilities, and...

  9. About Industrial Distributed Energy

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office's (AMO's) Industrial Distributed Energy activities build on the success of predecessor DOE programs on distributed energy and combined heat and power (CHP) while...

  10. Industrial Demand Module

    Gasoline and Diesel Fuel Update (EIA)

    Boiler, Steam, and Cogeneration (BSC) Component. The BSC Component satisfies the steam demand from the PA and BLD Components. In some industries, the PA Component produces...

  11. Integration of heat pumps into industrial processes

    SciTech Connect (OSTI)

    Chappell, R.N. (USDOE, Washington, DC (USA)); Priebe, S.J. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

    1989-01-01T23:59:59.000Z

    The Department of Energy and others have funded studies to assess the potential for energy savings using industrial heat pumps. The studies included classifications of heat pumps, economic evaluations, and placement of heat pumps in industrial processes. Pinch technology was used in the placement studies to determine the placement, size, and type of heat pumps for a given applications. There appears to be considerable scope for heat pumping in several industries, but, where maximum process energy savings are desired, it is important to consider heat pumping in the context of overall process integration. 19 refs., 15 figs.

  12. Surveillance of industrial processes with correlated parameters

    DOE Patents [OSTI]

    White, A.M.; Gross, K.C.; Kubic, W.L.; Wigeland, R.A.

    1996-12-17T23:59:59.000Z

    A system and method for surveillance of an industrial process are disclosed. The system and method includes a plurality of sensors monitoring industrial process parameters, devices to convert the sensed data to computer compatible information and a computer which executes computer software directed to analyzing the sensor data to discern statistically reliable alarm conditions. The computer software is executed to remove serial correlation information and then calculate Mahalanobis distribution data to carry out a probability ratio test to determine alarm conditions. 10 figs.

  13. Photovoltaic industry progress through 1984

    SciTech Connect (OSTI)

    Watts, R.L.; Smith, S.A.; Dirks, J.A.

    1985-04-01T23:59:59.000Z

    The growth of the US photovoltaics (PV) industry over the past decade has been impressive. First designed to provide power for satellites using high-cost production techniques, PV is now the economical choice in many remote terrestrial applications. The remarkable growth of PV in terms of quality of cells and modules, production techniques, and system design, was initiated by a cooperative effort of the US Government and the domestic PV manufacturers. European and Japanese firms entered the PV industry later, but are also growing rapidy. The Europeans continue to supply PV systems for village electrification and water pumping to many Third World countries. The Japanese have been developing the amorphous silicon (A-Si) technology by expanding its use in consumer goods. The world PV industry saw dramatic changes in industry ownership and in the emphasis on developing new and improved technology during 1984. The objective of this report is to present information on the developments of the world PV industry and focuses on developments occurring in 1984. Information is presented on a regional basis (US, Europe, Japan, other) to avoid disclosing company-confidential data. All information was gleaned from several sources, including a review of the technical literature and direct contacts with PV manufacturers. Prior to publishing the regional totals, all numbers were compared with those of other sources. The information contained in this report is prepared for use by the Department of Energy for their use in long-term R and D planning. However, this information should also be of interest by PV manufacturers and to those who may be contemplating entering the PV market. PV shipments for 1984, government supports for PV, and various PV market sectors are discussed.

  14. Growing Hawaii's agriculture industry,

    E-Print Network [OSTI]

    Program Overview Growing Hawaii's agriculture industry, one business at a time Website: http-3547 agincubator@ctahr.hawaii.edu Grow Your Business If you are looking to start an agriculture-related business with our program · Positively impact the agriculture industry in Hawaii with their success

  15. Geothermal industry assessment

    SciTech Connect (OSTI)

    Not Available

    1980-07-01T23:59:59.000Z

    An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

  16. Industrial Optimization Compact Course

    E-Print Network [OSTI]

    Kirches, Christian

    Industrial Optimization Compact Course and Challenge Workshop Optimization plays a crucial role of the processes are typically nonlinear and dyna- mic. Thus, complex dynamic optimization or optimal control in industrial optimization. February 17­20, 2014 ·9.00­17.00 IWR ·Im Neuenheimer Feld 368 ·69120 Heidelberg www

  17. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

  18. Online Monitoring of Plant Assets in the Nuclear Industry

    SciTech Connect (OSTI)

    Nancy Lybeck; Vivek Agarwal; Binh Pham; Richard Rusaw; Randy Bickford

    2013-10-01T23:59:59.000Z

    Today’s online monitoring technologies provide opportunities to perform predictive and proactive health management of assets within many different industries, in particular the defense and aerospace industries. The nuclear industry can leverage these technologies to enhance safety, productivity, and reliability of the aging fleet of existing nuclear power plants. The U.S. Department of Energy’s Light Water Reactor Sustainability Program is collaborating with the Electric Power Research Institute’s (EPRI’s) Long-Term Operations program to implement online monitoring in existing nuclear power plants. Proactive online monitoring in the nuclear industry is being explored using EPRI’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software, a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. This paper focuses on development of asset fault signatures used to assess the health status of generator step-up transformers and emergency diesel generators in nuclear power plants. Asset fault signatures describe the distinctive features based on technical examinations that can be used to detect a specific fault type. Fault signatures are developed based on the results of detailed technical research and on the knowledge and experience of technical experts. The Diagnostic Advisor of the FW-PHM Suite software matches developed fault signatures with operational data to provide early identification of critical faults and troubleshooting advice that could be used to distinguish between faults with similar symptoms. This research is important as it will support the automation of predictive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.

  19. Guide to the energy industries. [Index of 2930 items

    SciTech Connect (OSTI)

    Not Available

    1983-01-01T23:59:59.000Z

    The primary focus of the guide is the identification of marketing and financial data on seven specific energy industries: coal, energy alternatives, hydroelectric power, natural gas, nuclear energy, petroleum, and solar energy. The guide is divided into four parts. Part 1 contains sources of data that concern the seven energy industries. It is arranged alphabetically by industry and, within each industry, by broad geographic region. Part 2 lists publishers of energy industry data and includes an index to sources produced by those publishers. Part 3 contains indexes by SIC code and by subject. Part 4 is a title index.

  20. Building America Industrialized Housing Partnership (BAIHP II)

    SciTech Connect (OSTI)

    Abernethy, Bob; Chandra, Subrato; Baden, Steven; Cummings, Jim; Cummings, Jamie; Beal, David; Chasar, David; Colon, Carlos; Dutton, Wanda; Fairey, Philip; Fonorow, Ken; Gil, Camilo; Gordon, Andrew; Hoak, David; Kerr, Ryan; Peeks, Brady; Kosar, Douglas; Hewes, Tom; Kalaghchy, Safvat; Lubliner, Mike; Martin, Eric; McIlvaine, Janet; Moyer, Neil; Liguori, Sabrina; Parker, Danny; Sherwin, John; Stroer, Dennis; Thomas-Rees, Stephanie; Daniel, Danielle; McIlvaine, Janet

    2010-11-30T23:59:59.000Z

    This report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the final budget period (BP5) of our contract, January 1, 2010 to November 30, 2010. Highlights from the four previous budget periods are included for context. BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work in BP5 was performed in six tasks areas: Building America System Research Management, Documentation and Technical Support; System Performance Evaluations; Prototype House Evaluations; Initial Community Scale Evaluations; Project Closeout, Final Review of BA Communities; and Other Research Activities.

  1. Biomonitoring for the photovoltaics industry

    SciTech Connect (OSTI)

    Bernholc, N.M.; Moskowitz, P.D.

    1995-07-01T23:59:59.000Z

    Biomonitoring often is used as a method for estimating the dose to an individual. Therefore, a parameter of measurement, or biomarkers must be identified. The purpose of this paper is to give an overview of biomonitoring protocols for metals used in the photovoltaics industry. Special attention is given to areas that often are skimmed over, to gain insights into some of the problems that may arise when these tasks are carried out. Biological monitoring can be used to determine current human exposures to chemicals, as well as to detect past exposures, and the effects that these exposures may have on human health. It is used in conjunction with environmental monitoring to describe more completely worker`s exposures to, and absorption of, chemicals in the workplace. Biological specimens (e.g., blood, hair or urine) are analyzed for chemical agents, metabolites, or for some specific effect on the person (Lowry 1994). Biomonitoring can assess a workers exposure to industrial chemicals by all routes including skin absorption and ingestion. Although the methodology still is in its infancy, in cases where the procedures have been developed, it can be an invaluable component of an ongoing program of industrial hygiene monitoring. Like any technology, there are limitations to its effectiveness because of a lack of knowledge, contamination of specimens, and the introduction of errors.

  2. MHK technologies include current energy conversion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    research leverages decades of experience in engineering and design and analysis (D&A) of wind power technologies, and its vast research complex, including high-performance...

  3. Industrial Decision Making

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01T23:59:59.000Z

    Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy...

  4. AI Industrial Engineering 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    This paper describes the California Energy Commission’s (Commission) energy policies and programs that save energy and money for California’s manufacturing and food processing industries to help retain businesses in-state and reduce greenhouse gases...

  5. Industrial energy use indices 

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10T23:59:59.000Z

    Energy use index (EUI) is an important measure of energy use which normalizes energy use by dividing by building area. Energy use indices and associated coefficients of variation are computed for major industry categories ...

  6. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Plant managers around the world are interested in improving the energy efficiency of their facilities while both growing and modernizing their manufacturing capabilities. Emerging industrial technologies, both at the ...

  7. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Industrial steam users recognize the need to reduce system cost in order to remain internationally competitive. Steam systems are a key utility that influence cost significantly, and represent a high value opportunity ...

  8. Utility and Industrial Partnerships

    E-Print Network [OSTI]

    Sashihara, T. F.

    In the past decade, many external forces have shocked both utilities and their large industrial customers into seeking more effective ways of coping and surviving. One such way is to develop mutually beneficial partnerships optimizing the use...

  9. Engineering Industrial & Systems

    E-Print Network [OSTI]

    Berdichevsky, Victor

    powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I the skills necessary to be successful in today's global environment. EDGE exposes and trains engineering

  10. Clean Energy Manufacturing Initiative Industrial Efficiency and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

  11. NEMS industrial module documentation report

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  12. Industrial Development Fund (North Carolina)

    Broader source: Energy.gov [DOE]

    The Industrial Development Fund provides financing grants and loans through designated municipalities and counties to assist in infrastructure improvements for targeted industrial projects. The...

  13. Industrial Energy Efficiency: Designing Effective State Programs...

    Energy Savers [EERE]

    Industrial Energy Efficiency: Designing Effective State Programs for the Industrial Sector Industrial Energy Efficiency: Designing Effective State Programs for the Industrial...

  14. Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst

    E-Print Network [OSTI]

    Mountziaris, T. J.

    9/13/2007 Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst Department of Mechanical and Industrial Engineering About the Mechanical and Industrial Engineering Industry Advisory Board The purpose of the Mechanical and Industrial Engineering Industry Advisory

  15. QoS-oriented Integrated Network Planning for Industrial Wireless Sensor Networks

    E-Print Network [OSTI]

    Breu, Ruth

    , Industry Automation Division, Germany {feng.chen,german,dressler}@informatik.uni-erlangen.de Abstract including industrial automation. This also includes Wireless Sensor Network (WSN) technology [1] basedQoS-oriented Integrated Network Planning for Industrial Wireless Sensor Networks Feng Chen

  16. EE Regional Technology Roadmap Includes comparison

    E-Print Network [OSTI]

    EE Regional Technology Roadmap Includes comparison against 6th Power Plan (Update cyclically Data Clearinghouse BPA/RTF NEEA/Regional Programs Group Update Regional EE Technology Roadmap Lighting

  17. DIDACTICAL HOLOGRAPHIC EXHIBIT INCLUDING (HOLOGRAPHIC TELEVISION)

    E-Print Network [OSTI]

    de Aguiar, Marcus A. M.

    DIDACTICAL HOLOGRAPHIC EXHIBIT INCLUDING HoloTV (HOLOGRAPHIC TELEVISION) José J. Lunazzi , DanielCampinasSPBrasil Abstract: Our Institute of Physics exposes since 1980 didactical exhibitions of holography in Brazil where

  18. Sessions include: Beginning Farmer and Rancher

    E-Print Network [OSTI]

    Watson, Craig A.

    Sessions include: ­ Beginning Farmer and Rancher ­ New Markets and Regulations ­ Food Safety ­ Good Bug, Bad Bug ID ­ Horticulture ­ Hydroponics ­ Livestock and Pastured Poultry ­ Mushrooms ­ Organic ­ Live animal exhibits ­ Saturday evening social, and ­ Local foods Florida Small Farms and Alternative

  19. Gas storage materials, including hydrogen storage materials

    DOE Patents [OSTI]

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25T23:59:59.000Z

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  20. Gas storage materials, including hydrogen storage materials

    DOE Patents [OSTI]

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19T23:59:59.000Z

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  1. Aluminum industry energy conservation workshop V papers

    SciTech Connect (OSTI)

    Not Available

    1980-01-01T23:59:59.000Z

    This book contains papers given at a recent meeting sponsored by The Aluminum Association. The focus of the meeting is on energy conservation in the aluminum industry. Topics include recovery of waste heat, more energy efficient design of plants, and government policies.

  2. Dr. Lewis Ntaimo Industrial and Systems Engineering

    E-Print Network [OSTI]

    Ding, Yu

    for renewable energy, including wind energy, is cost and marketability and that wind energy is perhaps the most of the cost of wind energy generation, depending on wind farm size, terrain and other factors. "You can in the market. However, to sustain wind energy generation and increase its market share, industry needs

  3. The Office of Industrial Technologies - enhancing the competitiveness, efficiency, and environmental quality of American industry through technology partnerships

    SciTech Connect (OSTI)

    NONE

    1997-09-01T23:59:59.000Z

    A critical component of the Federal Government`s effort to stimulate improved industrial energy efficiency is the DOE`s Office of Industrial Technologies (OIT). OIT funds research, development, and demonstration (RD&D) efforts and transfers the resulting technology and knowledge to industry. This document describes OIT`s program, including the new Industries of the Future (IOF) initiative and the strategic activities that are part of the IOF process. It also describes the energy, economic, and environmental characteristics of the materials and process industries that consume nearly 80% of all energy used by manufacturing in the United States. OIT-supported RD&D activities relating to these industries are described, and quantitative estimates of the potential benefits of many OIT-supported technologies for industry are also provided.

  4. Policies on Japan's Space Industry

    E-Print Network [OSTI]

    with space emerging countries 3. Step up leading-edge science and technology as an innovation engine (1Policies on Japan's Space Industry Shuichi Kaneko Director, Space Industry Office Manufacturing Industries Bureau Ministry of Economy, Trade and Industry (METI) #12;Japan's Space Policy is based

  5. Product strategy in response to technological innovation in the semiconductor test industry

    E-Print Network [OSTI]

    Lin, Robert W. (Robert Wei-Pang), 1976-

    2004-01-01T23:59:59.000Z

    After the market boom of 2000 in the semiconductor industry changed significantly. The changes included stricter limits on capital cost spending, and the increased propensity of the industry to outsource the manufacturing ...

  6. Econometric model of the U.S. sheep and mohair industries for policy analysis 

    E-Print Network [OSTI]

    Ribera Landivar, Luis Alejandro

    2005-08-29T23:59:59.000Z

    The U.S. sheep industry has been declining in size for many years. Many factors have contributed to the decline of the sheep industry including declining consumption of lamb and mutton, the growth in manmade fiber use, ...

  7. Feezol Industries | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGerman AerospaceEfficiencyInformation

  8. Electric Power Monthly, August 1990. [Glossary included

    SciTech Connect (OSTI)

    Not Available

    1990-11-29T23:59:59.000Z

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  9. Emulsified industrial oils recycling

    SciTech Connect (OSTI)

    Gabris, T.

    1982-04-01T23:59:59.000Z

    The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

  10. Industrial Assessment Center

    SciTech Connect (OSTI)

    Dr. Diane Schaub

    2007-03-05T23:59:59.000Z

    Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

  11. Libyan oil industry

    SciTech Connect (OSTI)

    Waddams, F.C.

    1980-01-01T23:59:59.000Z

    Three aspects of the growth and progress of Libya's oil industry since the first crude oil discovery in 1961 are: (1) relations between the Libyan government and the concessionary oil companies; (2) the impact of Libyan oil and events in Libya on the petroleum markets of Europe and the world; and (3) the response of the Libyan economy to the development of its oil industry. The historical review begins with Libya's becoming a sovereign nation in 1951 and traces its subsequent development into a position as a leading world oil producer. 54 references, 10 figures, 55 tables.

  12. Solar industrial process heat

    SciTech Connect (OSTI)

    Lumsdaine, E.

    1981-04-01T23:59:59.000Z

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  13. Industrial Equipment Impacts Infrastructure

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf05 IdentifiedPathways to SustainedIndustrial AssessmentIndustrial

  14. Ontario's Industrial Energy Services Program

    E-Print Network [OSTI]

    Ploeger, L. K.

    .8%! ! ! ! OTHER 8.4%! l4.9%! l4.0%! ! ! ! TOTAL 100.0%! 100.0%! 100.0%! ! PROGRAM STRATEGY Ontario's Industrial Energy Services Program was designed to: lead industrial energy consumers to the realization that increased energy efficiency generates... ONTARIO'S INDUSTRIAL ENERGY SERVICES PROGRAM LINDA K. PLOEGER, GENERAL MANAGER, INDUSTRY PROGRAMS ONTARIO MINISTRY OF ENERGY TORONTO, ONTARIO, ABSTRACT The Ontario Ministry of Energy began offering its new Industrial Energy Services Program...

  15. NOTICE OF PUBLIC HEARING City of Industry Renewable Energy Resources

    E-Print Network [OSTI]

    NOTICE OF PUBLIC HEARING City of Industry Renewable Energy Resources Procurement Plan & Enforcement a public hearing to consider the adoption of the City of Industry Renewable Energy Resources Procurement to procure a minimum quantity of electricity products from eligible renewable energy resources, including

  16. Communication in automation, including networking and wireless

    E-Print Network [OSTI]

    Antsaklis, Panos

    Communication in automation, including networking and wireless Nicholas Kottenstette and Panos J and networking in automation is given. Digital communication fundamentals are reviewed and networked control are presented. 1 Introduction 1.1 Why communication is necessary in automated systems Automated systems use

  17. Electrochemical cell including ribbed electrode substrates

    SciTech Connect (OSTI)

    Breault, R.D.; Goller, G.J.; Roethlein, R.J.; Sprecher, G.C.

    1981-07-21T23:59:59.000Z

    An electrochemical cell including an electrolyte retaining matrix layer located between and in contact with cooperating anode and cathode electrodes is disclosed herein. Each of the electrodes is comprised of a ribbed (or grooved) substrate including a gas porous body as its main component and a catalyst layer located between the substrate and one side of the electrolyte retaining matrix layer. Each substrate body includes a ribbed section for receiving reactant gas and lengthwise side portions on opposite sides of the ribbed section. Each of the side portions includes a channel extending along its entire length from one surface thereof (e.g., its outer surface) to but stopping short of an opposite surface (e.g., its inner surface) so as to provide a web directly between the channel and the opposite surface. Each of the channels is filled with a gas impervious substance and each of the webs is impregnated with a gas impervious substance so as to provide a gas impervious seal along the entire length of each side portion of each substrate and between the opposite faces thereof (e.g., across the entire thickness thereof).

  18. Prices include compostable serviceware and linen tablecloths

    E-Print Network [OSTI]

    California at Davis, University of

    & BLACK BEAN ENCHILADAS Fresh corn tortillas stuffed with tender brown butter sautéed butternut squash, black beans and yellow on- ions, garnished with avocado and sour cream. $33 per person EDAMAME & CORN SQUASH & BLACK BEAN ENCHILADA FREE RANGE CHICK- EN SANDWICH PLATED ENTREES All plated entrees include

  19. Energy Consumption of Personal Computing Including Portable

    E-Print Network [OSTI]

    Namboodiri, Vinod

    Energy Consumption of Personal Computing Including Portable Communication Devices Pavel Somavat1 consumption, questions are being asked about the energy contribution of computing equipment. Al- though studies have documented the share of energy consumption by this type of equipment over the years, research

  20. M. Bujorianu and M. Fisher (Eds.): Workshop on Formal Methods for Aerospace (FMA)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    software industry. It focuses on software development and maintenance phases of satellite lifecycle Flight-Software L. Besnard, T. Gautier, J. Ouy, J.-P. Talpin, J.-P. Bodeveix, A. Cortier, M. Pantel, M in MDE to the satellite flight software indus- try, advocates a top-down approach built on a domain

  1. China's Energy Management System Program for Industry

    E-Print Network [OSTI]

    Hedman, B.; Yu, Y.; Friedman, Z.; Taylor, R.

    2014-01-01T23:59:59.000Z

    En er gy C o n su m p ti o n , Q u ad s Source: DOE EIA International Energy Outlook 2013 4 * Includes fuel for electricity generation and T&D losses ESL-IE-14-05-24 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New... y En er gy C o n su m p ti o n , Q u ad s Source: DOE EIA International Energy Outlook 2013 Total Non-OECD Total OECD China U.S. India 5 ESL-IE-14-05-24 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May...

  2. The American nuclear power industry. A handbook

    SciTech Connect (OSTI)

    Pearman, W.A.; Starr, P.

    1984-01-01T23:59:59.000Z

    This book presents an overview of the history and current organization of the American nuclear power industry. Part I focuses on development of the industry, including the number, capacity, and type of plants in commercial operation as well as those under construction. Part II examines the safety, environmental, antitrust, and licensing issues involved in the use of nuclear power. Part III presents case studies of selected plants, such as Three Mile Island and Seabrook, to illustrate some of the issues discussed. The book also contains a listing of the Nuclear Regulatory Commission libraries and a subject index.

  3. China's Energy Management System Program for Industry 

    E-Print Network [OSTI]

    Hedman, B.; Yu, Y.; Friedman, Z.; Taylor, R.

    2014-01-01T23:59:59.000Z

    En er gy C o n su m p ti o n , Q u ad s Source: DOE EIA International Energy Outlook 2013 4 * Includes fuel for electricity generation and T&D losses ESL-IE-14-05-24 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New... y En er gy C o n su m p ti o n , Q u ad s Source: DOE EIA International Energy Outlook 2013 Total Non-OECD Total OECD China U.S. India 5 ESL-IE-14-05-24 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May...

  4. Computer Aided Design of Advanced Turbine Airfoil Alloys for Industrial Gas Turbines in Coal Fired Environments

    SciTech Connect (OSTI)

    G.E. Fuchs

    2007-12-31T23:59:59.000Z

    Recent initiatives for fuel flexibility, increased efficiency and decreased emissions in power generating industrial gas turbines (IGT's), have highlighted the need for the development of techniques to produce large single crystal or columnar grained, directionally solidified Ni-base superalloy turbine blades and vanes. In order to address the technical difficulties of producing large single crystal components, a program has been initiated to, using computational materials science, better understand how alloy composition in potential IGT alloys and solidification conditions during processing, effect castability, defect formation and environmental resistance. This program will help to identify potential routes for the development of high strength, corrosion resistant airfoil/vane alloys, which would be a benefit to all IGT's, including small IGT's and even aerospace gas turbines. During the first year, collaboration with Siemens Power Corporation (SPC), Rolls-Royce, Howmet and Solar Turbines has identified and evaluated about 50 alloy compositions that are of interest for this potential application. In addition, alloy modifications to an existing alloy (CMSX-4) were also evaluated. Collaborating with SPC and using computational software at SPC to evaluate about 50 alloy compositions identified 5 candidate alloys for experimental evaluation. The results obtained from the experimentally determined phase transformation temperatures did not compare well to the calculated values in many cases. The effects of small additions of boundary strengtheners (i.e., C, B and N) to CMSX-4 were also examined. The calculated phase transformation temperatures were somewhat closer to the experimentally determined values than for the 5 candidate alloys, discussed above. The calculated partitioning coefficients were similar for all of the CMSX-4 alloys, similar to the experimentally determined segregation behavior. In general, it appears that computational materials science has become a useful tool to help reduce the number of iterations necessary to perform laboratory experiments or alloy development. However, we clearly are not able to rely solely on computational techniques in the development of high temperature materials for IGT applications. A significant amount of experimentation will continue to be required.

  5. INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER

    SciTech Connect (OSTI)

    MELINDA KRAHENBUHL

    2010-05-28T23:59:59.000Z

    The U. S. Department of Energy’s Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

  6. Subterranean barriers including at least one weld

    DOE Patents [OSTI]

    Nickelson, Reva A.; Sloan, Paul A.; Richardson, John G.; Walsh, Stephanie; Kostelnik, Kevin M.

    2007-01-09T23:59:59.000Z

    A subterranean barrier and method for forming same are disclosed, the barrier including a plurality of casing strings wherein at least one casing string of the plurality of casing strings may be affixed to at least another adjacent casing string of the plurality of casing strings through at least one weld, at least one adhesive joint, or both. A method and system for nondestructively inspecting a subterranean barrier is disclosed. For instance, a radiographic signal may be emitted from within a casing string toward an adjacent casing string and the radiographic signal may be detected from within the adjacent casing string. A method of repairing a barrier including removing at least a portion of a casing string and welding a repair element within the casing string is disclosed. A method of selectively heating at least one casing string forming at least a portion of a subterranean barrier is disclosed.

  7. Power generation method including membrane separation

    DOE Patents [OSTI]

    Lokhandwala, Kaaeid A. (Union City, CA)

    2000-01-01T23:59:59.000Z

    A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

  8. Rotor assembly including superconducting magnetic coil

    DOE Patents [OSTI]

    Snitchler, Gregory L. (Shrewsbury, MA); Gamble, Bruce B. (Wellesley, MA); Voccio, John P. (Somerville, MA)

    2003-01-01T23:59:59.000Z

    Superconducting coils and methods of manufacture include a superconductor tape wound concentrically about and disposed along an axis of the coil to define an opening having a dimension which gradually decreases, in the direction along the axis, from a first end to a second end of the coil. Each turn of the superconductor tape has a broad surface maintained substantially parallel to the axis of the coil.

  9. Electric power monthly, September 1990. [Glossary included

    SciTech Connect (OSTI)

    Not Available

    1990-12-17T23:59:59.000Z

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  10. Advanced Industrial Materials Program. Annual progress report, FY 1993

    SciTech Connect (OSTI)

    Stooksbury, F. [comp.

    1994-06-01T23:59:59.000Z

    Mission of the AIM program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDAs. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

  11. Industrial recovered-materials-utilization targets for the metals and metal-products industry

    SciTech Connect (OSTI)

    None

    1980-03-01T23:59:59.000Z

    The National Energy Conservation Policy Act of 1978 directs DOE to set targets for increased utilization of energy-saving recovered materials for certain industries. These targets are to be established at levels representing the maximum feasible increase in utilization of recovered materials that can be achieved progressively by January 1, 1987 and is consistent with technical and economic factors. A benefit to be derived from the increased use of recoverable materials is in energy savings, as state in the Act. Therefore, emhasis on different industries in the metals sector has been related to their energy consumption. The ferrous industry (iron and steel, ferrour foundries and ferralloys), as defined here, accounts for approximately 3%, and all others for the remaining 3%. Energy consumed in the lead and zinc segments is less than 1% each. Emphasis is placed on the ferrous scrap users, followed by the aluminum and copper industries. A bibliography with 209 citations is included.

  12. New source performance standards for industrial boilers. Volume 2. Review of industry operating practices

    SciTech Connect (OSTI)

    Bryan, R.J.; Weisenberg, I.J.; Wilson, K.

    1980-09-01T23:59:59.000Z

    The applicability is evaluated of several possible versions of a revised New Source Performance Standards (NSPS) for industrial boilers to boilers that are operated according to typical industry practices. A survey of operating practices is presented, and it is concluded that an NSPS that includes too high a percent removal requirement for SO/sub 2/ (90%) might be excessively costly and cause operating problems for the industrial operator. More field evaluations of low excess air and low Btu gasification are required to validate these techniques for pollution control under industrial boiler operating conditions. The cost of two small boilers with no SO/sub 2/ controls was less than one large boiler of twice the capacity with SO/sub 2/ controls. The annual cost of operating and maintaining the control system accounted for the difference.

  13. A Low Cost Energy Management Program at Engelhard Industries Division 

    E-Print Network [OSTI]

    Brown, T. S.; Michalek, R.; Reiter, S.

    1982-01-01T23:59:59.000Z

    in technology related to precious metals and nonmetallic minerals. It manufactures high-performance chemical and precious metals products, including catalysts for the petroleum and automotive industries. Engelhard's energy costs have risen dramatically over...

  14. A Low Cost Energy Management Program at Engelhard Industries Division

    E-Print Network [OSTI]

    Brown, T. S.; Michalek, R.; Reiter, S.

    1982-01-01T23:59:59.000Z

    in technology related to precious metals and nonmetallic minerals. It manufactures high-performance chemical and precious metals products, including catalysts for the petroleum and automotive industries. Engelhard's energy costs have risen dramatically over...

  15. Market-Based Emissions Regulation and Industry Dynamics

    E-Print Network [OSTI]

    Fowlie, Meredith

    We assess the long-run dynamic implications of market-based regulation of carbon dioxide emissions in the US Portland cement industry. We consider several alternative policy designs, including mechanisms that use production ...

  16. An Overview of the Louisiana Primary Solid Wood Products Industry

    E-Print Network [OSTI]

    goal of this second study is to profile the primary solid wood products industry. In addition (including pulp and paper) and secondary manufacturing establishments (Jacob et al. 1987). The forest

  17. Organic Rankine Cycles for the Petro-Chemical Industry 

    E-Print Network [OSTI]

    Rose, R. K.; Colosimo, D. D.

    1979-01-01T23:59:59.000Z

    Under a cooperatively funded DOE/MTI program, a packaged organic Rankine power recovery system is being developed specifically to meet the needs of the petroleum refining and chemical industries. Program objectives include an actual in...

  18. Industrial Compressed Air System Energy Efficiency Guidebook.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1993-12-01T23:59:59.000Z

    Energy efficient design, operation and maintenance of compressed air systems in industrial plants can provide substantial reductions in electric power and other operational costs. This guidebook will help identify cost effective, energy efficiency opportunities in compressed air system design, re-design, operation and maintenance. The guidebook provides: (1) a broad overview of industrial compressed air systems, (2) methods for estimating compressed air consumption and projected air savings, (3) a description of applicable, generic energy conservation measures, and, (4) a review of some compressed air system demonstration projects that have taken place over the last two years. The primary audience for this guidebook includes plant maintenance supervisors, plant engineers, plant managers and others interested in energy management of industrial compressed air systems.

  19. Multiverse rate equation including bubble collisions

    E-Print Network [OSTI]

    Michael P. Salem

    2013-02-19T23:59:59.000Z

    The volume fractions of vacua in an eternally inflating multiverse are described by a coarse-grain rate equation, which accounts for volume expansion and vacuum transitions via bubble formation. We generalize the rate equation to account for bubble collisions, including the possibility of classical transitions. Classical transitions can modify the details of the hierarchical structure among the volume fractions, with potential implications for the staggering and Boltzmann-brain issues. Whether or not our vacuum is likely to have been established by a classical transition depends on the detailed relationships among transition rates in the landscape.

  20. Transforming the Oil Industry into the Energy Industry

    E-Print Network [OSTI]

    Sperling, Daniel; Yeh, Sonia

    2009-01-01T23:59:59.000Z

    Transforming the Oil Industry into the Energy Industry BYculprit. It consumes half the oil used in the world andconsuming two thirds of the oil and causing about one third

  1. Innovative New Industrial Technologies: An Industry/DOE Joint Endeavor

    E-Print Network [OSTI]

    Gross, T. J.

    The Department of Energy’s Office of Industrial Programs supports research and development leading to improved energy efficiency and greater overall productivity in the industrial sector. Its basic strategy is a program of cost-shared R...

  2. INDUSTRIAL ASSOCIATESHIP SCHEME Centre for Industrial Consultancy and Sponsored Research

    E-Print Network [OSTI]

    Bhashyam, Srikrishna

    this scheme: #12;(i) Energy Energy Storage (1990) Strategies for Energy Saving in Industry (1993) Pollution Control Equipment (2001) Acoustics and Noise Control for Industry (2005) Urban Air Quality

  3. Rocky Mountain NP, Colorado Nitrogen emissions from a variety of human made sources, including ammonia

    E-Print Network [OSTI]

    MacDonald, Lee

    sources. Sources of human made or excess atmospheric nitrogen include power plants, vehicle exhaust, oil are working with industry to reduce significant sources of nitrogen emissions. The State of Colorado will use at CSU is focused on identifying and refining voluntary best management practices (BMPs) for agricultural

  4. TUNGSTEN--2003 79.1 References that include a section mark () are found in the Internet

    E-Print Network [OSTI]

    Stockpile (NDS) and increases in stocks held by U.S. industry. No U.S. tungsten mine production was reported reported in 2001. Salient U.S. tungsten statistics and world tungsten concentrate production for 2003TUNGSTEN--2003 79.1 1 References that include a section mark (§) are found in the Internet

  5. Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

    SciTech Connect (OSTI)

    Azimi, S.A.; Conrad, J.L.; Reed, J.E.

    1985-03-01T23:59:59.000Z

    Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

  6. INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles of physical and human resources. These engineers are involved in developing manufacturing systems to help companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited

  7. BTU Accounting for Industry

    E-Print Network [OSTI]

    Redd, R. O.

    1979-01-01T23:59:59.000Z

    , salesmen cars, over the highway trucks, facilities startup, waste used as fuel and fuels received for storage. This is a first step in the DOE's effort to establish usage guidelines for large industrial users and, we note, it requires BTU usage data...-generated electricity, heating, ventilating, air conditioning, in-plant transportation, ore hauling, raw material storage and finished product warehousing. Categories which are excluded are corporate and divisional offices, basic research, distribution centers...

  8. Industrial Waste Heat Recovery

    E-Print Network [OSTI]

    Ward, M. E.; Solomon, N. G.; Tabb, E. S.

    1980-01-01T23:59:59.000Z

    INDUSTRIAL WASTE HEAT RECOVREY M. E. Ward and N. G. Solomon E. S. Tabb Solar Turbines International and Gas Research Institute San Diego, California Chicago, Illinois ABSTRACT i I One hundred fifty reports were reviewed along with interviews... tests, promising low temperature heat exchanger tube alloys and coated surfaces were identified. 1INTROUCTION of advanced technology heat recovery techniques 1_ Recovering waste heat from the flue gases of the pr~ary objective. Specific objectives...

  9. Industrial Energy Efficiency Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to Industrial

  10. The impact of government policies on industrial evolution : the case of China's automotive industry

    E-Print Network [OSTI]

    Luo, Jianxi

    2006-01-01T23:59:59.000Z

    Governmental industrial policies have great influence on industrial performances and development trajectories. The infant industry theory has been the dominating theoretical foundation of the industrial policies in developing ...

  11. Optical panel system including stackable waveguides

    DOE Patents [OSTI]

    DeSanto, Leonard (Dunkirk, MD); Veligdan, James T. (Manorville, NY)

    2007-11-20T23:59:59.000Z

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  12. Optical panel system including stackable waveguides

    DOE Patents [OSTI]

    DeSanto, Leonard; Veligdan, James T.

    2007-03-06T23:59:59.000Z

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  13. Thermovoltaic semiconductor device including a plasma filter

    DOE Patents [OSTI]

    Baldasaro, Paul F. (Clifton Park, NY)

    1999-01-01T23:59:59.000Z

    A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

  14. Published in 2001 IEEE Aerospace Conference, 2001, Vol.1, 331-338 -DOI 10.1109/AERO.2001.931724 Designing a Water-Quality Monitor

    E-Print Network [OSTI]

    Kounaves, Samuel P.

    Published in 2001 IEEE Aerospace Conference, 2001, Vol.1, 331-338 - DOI 10.1109/AERO.2001-7803-6599-2/01/$10.00 © 2001 IEEE Abstract---This effort is directed at developing a sensor for evaluating water quality. A set on the ionophore to control transport and generate a gradient of the analyte through the #12;Published in 2001 IEEE

  15. Industrial Heat Pump Design Options

    E-Print Network [OSTI]

    Gilbert, J. S.

    There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

  16. Industrial Heat Pump Design Options 

    E-Print Network [OSTI]

    Gilbert, J. S.

    1985-01-01T23:59:59.000Z

    There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

  17. A National Resource for Industry

    E-Print Network [OSTI]

    alloys, and metal matrix composite products carbon fibe's manufacturing industries. These industries call upon ORNL's expertise in materials synthesis, characterization-efficient manufacturing processes and materials targeting products of the future. The Department of Energy's first

  18. Electrotechnologies and Industrial Pollution Control

    E-Print Network [OSTI]

    Schmidt, P. S.

    The role of electrotechnologies in the control of emissions and effluents from industrial processes is discussed. Matrices are presented identifying those electrotechnologies which impact pollution in various industries. Specific examples...

  19. Deaerators in Industrial Steam Systems

    SciTech Connect (OSTI)

    Not Available

    2006-01-01T23:59:59.000Z

    This revised ITP tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  20. Modeling the semiconductor industry dynamics

    E-Print Network [OSTI]

    Wu, Kailiang

    2008-01-01T23:59:59.000Z

    The semiconductor industry is an exciting and challenging industry. Strong demand at the application end, plus the high capital intensity and rapid technological innovation in manufacturing, makes it difficult to manage ...

  1. Texas Industries of the Future

    E-Print Network [OSTI]

    Ferland, K.

    The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs...

  2. Fracking: An Industry Under Pressure

    E-Print Network [OSTI]

    Melville, Jo

    2013-01-01T23:59:59.000Z

    is able to squeeze out of oil and gas wells, it is a hugehugely to the local oil and gas industries, household incomeMore importantly, the oil and gas industry -- mostly through

  3. Innovative Utility Pricing for Industry

    E-Print Network [OSTI]

    Ross, J. A.

    tariffs can re a market for power during the time when it has sult in benefits to industry, to the electric abundant capacity available. From the other rate utility, and to other ratepayers on the electric payers' perspective, there will be a continued...INNOVATIVE UTILITY PRICING FOR INDUSTRY James A. Ross Drazen-Brubaker &Associates, Inc. St. Louis, Missouri ABSTRACT The electric utility industry represents only one source of power available to industry. Al though the monopolistic...

  4. MECHANICAL & INDUSTRIAL ENGINEERING COLLOQUIUM: ME 794

    E-Print Network [OSTI]

    Bieber, Michael

    MEC Particle transport along and across the streamlines in microfluidic devices Dr. Shahab Shojaei-Zadeh Mechanical and Aerospace Engineering Rutgers University, New Jersey Flow in microfluidic devices are usually regarded based on the consideration of Stokes flow condition. Inertial microfluidics, however, has recently

  5. Engine lubrication circuit including two pumps

    DOE Patents [OSTI]

    Lane, William H.

    2006-10-03T23:59:59.000Z

    A lubrication pump coupled to the engine is sized such that the it can supply the engine with a predetermined flow volume as soon as the engine reaches a peak torque engine speed. In engines that operate predominately at speeds above the peak torque engine speed, the lubrication pump is often producing lubrication fluid in excess of the predetermined flow volume that is bypassed back to a lubrication fluid source. This arguably results in wasted power. In order to more efficiently lubricate an engine, a lubrication circuit includes a lubrication pump and a variable delivery pump. The lubrication pump is operably coupled to the engine, and the variable delivery pump is in communication with a pump output controller that is operable to vary a lubrication fluid output from the variable delivery pump as a function of at least one of engine speed and lubrication flow volume or system pressure. Thus, the lubrication pump can be sized to produce the predetermined flow volume at a speed range at which the engine predominately operates while the variable delivery pump can supplement lubrication fluid delivery from the lubrication pump at engine speeds below the predominant engine speed range.

  6. Models of Procyon A including seismic constraints

    E-Print Network [OSTI]

    P. Eggenberger; F. Carrier; F. Bouchy

    2005-01-14T23:59:59.000Z

    Detailed models of Procyon A based on new asteroseismic measurements by Eggenberger et al (2004) have been computed using the Geneva evolution code including shellular rotation and atomic diffusion. By combining all non-asteroseismic observables now available for Procyon A with these seismological data, we find that the observed mean large spacing of 55.5 +- 0.5 uHz favours a mass of 1.497 M_sol for Procyon A. We also determine the following global parameters of Procyon A: an age of t=1.72 +- 0.30 Gyr, an initial helium mass fraction Y_i=0.290 +- 0.010, a nearly solar initial metallicity (Z/X)_i=0.0234 +- 0.0015 and a mixing-length parameter alpha=1.75 +- 0.40. Moreover, we show that the effects of rotation on the inner structure of the star may be revealed by asteroseismic observations if frequencies can be determined with a high precision. Existing seismological data of Procyon A are unfortunately not accurate enough to really test these differences in the input physics of our models.

  7. Industrial Energy Audit Guidebook: Guidelines for Conducting...

    Open Energy Info (EERE)

    Industry Resource Type: Guidemanual Website: china.lbl.govsiteschina.lbl.govfilesLBNL-3991E.Industrial%20Energy Industrial Energy Audit Guidebook: Guidelines for Conducting...

  8. Local Option- Industrial Facilities and Development Bonds

    Broader source: Energy.gov [DOE]

    Under the Utah Industrial Facilities and Development Act, counties, municipalities, and state universities in Utah may issue Industrial Revenue Bonds (IRBs) or Industrial Development Bonds (IDBs)...

  9. Federal Utility Partnership Working Group Industry Commitment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Commitment Federal Utility Partnership Working Group Industry Commitment Investor-owned electric utility industry members of the Edison Electric Institute pledge to assist...

  10. 337th Catalysis Research Center (CRC) Colloquium Fluorine Industry in China

    E-Print Network [OSTI]

    Ishii, Hitoshi

    337th Catalysis Research Center (CRC) Colloquium Fluorine Industry in China Lu Long (Shanghai industries in China, the second largest economy in the world. In this presentation, fluorine industry in China and the potential business opportunity will be discussed briefly, including inorganic fluorides

  11. PROGRAMME SPECIFICATION UNDERGRADUATE PROGRAMMES Programme name Civil Engineering, Civil Engineering with Industrial

    E-Print Network [OSTI]

    Weyde, Tillman

    , Civil Engineering with Industrial Placement Award MEng (Hons) School School of Engineering that includes the Institution of Civil Engineers and the Institution of Structural Engineers. The industrial to the practice of engineering have had firsthand experience of current practice in the Civil Engineering industry

  12. Canada's coal industry: full swing ahead

    SciTech Connect (OSTI)

    Stone, K. [Natural Resources Canada (Canada). Minerals and Metals Sector

    2007-03-15T23:59:59.000Z

    The article presents facts and figures about Canada's coal industry in 2006 including production, exports, imports, mines in operation, the Genesee 3 coal-fired generation unit, the Dodds-Roundhill Gasification Project, and new coal mine development plans. The outlook for 2007 is positive, with coal production expected to increase from 67 Mt in 2006 to 70 Mt in 2007 and exports expected to increase from 28 Mt in 2006 to 30 Mt in 2007.

  13. Industrial recreation in Texas: an exploratory study

    E-Print Network [OSTI]

    Kershaw, Deborah Louise

    1982-01-01T23:59:59.000Z

    that a recreation program was not included in their service offerings. Three of these respondents are vendors of recreation services. One is an institute of higher education and another is a municipal park and recreation department. They indicated... the data concerning the number of employees utilized in the administration of the recreation programs. Table 2. Industrial Recreation Program Organization ~Sons or EmpToyee Sponsor Company Sponsor Combinations ALL RESPONDENTS ~F 18 12 10 fftl...

  14. Energy And The Foods Processing Industry

    E-Print Network [OSTI]

    Baker, R.

    temperature of the outside air. Other factors limiting downward progression of SCT inc lude gas pressure-driven pumping systems and improperly designed hot-gas defrost systems. The chief factors limiting upward progression of the SST include excess... flows is performed, with the objective of determining where heat can be transferred from cooling to heating streams. The heat transfer can be either via recuperative heat exchangers or industrial heat pumps; the choice of which is defined...

  15. A lessee's guide to leasing industrial equipment

    E-Print Network [OSTI]

    Johnson, Jones Eugene

    1959-01-01T23:59:59.000Z

    is included in the agree- ment, the lessee is treading on dangerous ground, The Internal Reve- nue Service will examine such agreements closely and may decide the original transaction was a sale and not a lease. Regardless, whether the lessee actually...A LESSEE'S GUIDE TO LEASING INDUSTRIAL EQUIPMENT A Thesis Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in Partial fulfillment of the requirements for the degree of Master of Business Administration...

  16. Industrial Cogeneration Application

    E-Print Network [OSTI]

    Mozzo, M. A.

    INDUSTRIAL COGENERATION APLLICATION Martin A. Mozzo, Jr., P.E. American Standard, Inc. New York,New York ABSTRACT Cogeneration is the sequential use of a single fuel source to generate electrical and thermal energy. It is not a new technology... been reviewing the potential of cogeneration at some of our key facilities. Our plan is to begin with a Pilot Plant 500 KW steam turbine generator to be install~d and operating in 1986. Key points to be discuss~d in the paper are: 1...

  17. Natural Gas Industrial Price

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14 Dec-14 Jan-15LiquidBG 0 20Year Jan Feb2009 20103 5.53

  18. Industrial Green | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook link to04948Industrial Green

  19. CASL - Industry Council

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteandscience, and8 FY0Link to Resources Industry

  20. CASL - Industry Council Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteandscience, and8 FY0Link to Resources IndustryCASL

  1. Industrial Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to Industrial Energy

  2. Industrial Energy Efficiency Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to IndustrialEnergy

  3. Advanced Industrial Materials (AIM) Program: Annual progress report FY 1995

    SciTech Connect (OSTI)

    NONE

    1996-04-01T23:59:59.000Z

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This Annual Report for FY 1995 contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Areas covered here are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

  4. Aerospace and Mechanical Engineers design and build unique, complex mechanical, optical,

    E-Print Network [OSTI]

    Rohs, Remo

    including control of turbulence, emerging fuel cell technologies, computational fluid mechanics, ground skills in the areas of mechanics, thermodynamics, fluid mechanics, heat transfer, materials and automatic

  5. NIST Mobility and Manipulation Project Needs and Plans The NIST Mobility and Manipulation (MM) Project is seeking government, industry

    E-Print Network [OSTI]

    Perkins, Richard A.

    . The project testbed includes an industrial robot mounted on a linear rail. The MM Project also plans characterizing components of the new NIST robot testbed, which includes a six-axis industrial robot arm under that are of concern to industry. Real world applications are also highly beneficial for developing and evaluating

  6. The role of advanced technology in the future of the power generation industry

    SciTech Connect (OSTI)

    Bechtel, T.F.

    1994-10-01T23:59:59.000Z

    This presentation reviews the directions that technology has given the power generation industry in the past and how advanced technology will be the key for the future of the industry. The topics of the presentation include how the industry`s history has defined its culture, how today`s economic and regulatory climate has constrained its strategy, and how certain technology options might give some of the players an unfair advantage.

  7. New players, opportunities and frustrations in the global marketplace -- Results of an industry-wide survey

    SciTech Connect (OSTI)

    Schwartz, R.

    1998-07-01T23:59:59.000Z

    Review of the annual industry-wide survey of the independent power industry, including top players, market shares, company growth rates, player activities by country and market expectations. The author offers fresh analysis on industry trends based on the survey, conducted through direct interviews with nearly 200 global power developers. Unlike other overviews offering demand projections of various power markets, this survey takes a look at the industry itself.

  8. Whitacre College of Engineering Industrial Engineering Department

    E-Print Network [OSTI]

    Gelfond, Michael

    Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

  9. Faculty of Engineering & Design Industrial Placements

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Faculty of Engineering & Design Industrial Placements A guide for industry #12;Industrial placements The Faculty of Engineering & Design has built close links with engineering companies through research, projects, placements and graduate employees. We know that working with industry ensures our

  10. Competitive developments in the electric supply industry

    SciTech Connect (OSTI)

    Bruder, G.F.; Lively, M.

    1996-12-31T23:59:59.000Z

    Competition in the electric supply industry is outlined. The following topics are discussed: six impending major developments in the electric industry; recent and projected developments in the industry; where is the industry headed?; and what the future holds.

  11. GRADUATE STUDIES IN BUILDING TECHNOLOGY AN INTERDISCIPLINARY PROGRAM INCLUDING

    E-Print Network [OSTI]

    Reif, Rafael

    materials industry, in building construction and industrialized buildings, as well as practice buildings; and new housing construction costs represent about eight percent of the annual GNP. The average to the construction of new buildings, to the retrofit or rehabilitation of existing buildings and to the efficient

  12. The Industrialization of Thermoelectric Power Generation Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Industrialization of Thermoelectric Power Generation Technology The Industrialization of Thermoelectric Power Generation Technology Presents module and system requirements for...

  13. ITP Industrial Materials: Development and Commercialization of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Materials: Development and Commercialization of Alternative Carbon Fiber Precursors and Conversion Technologies ITP Industrial Materials: Development and...

  14. SPIDERS Joint Capability Technology Demonstration Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SPIDERS Joint Capability Technology Demonstration Industry Day Presentations SPIDERS Joint Capability Technology Demonstration Industry Day Presentations Presentations from the...

  15. Office of Industry Research and Technology Programs Greetings to Industry

    E-Print Network [OSTI]

    Ginzel, Matthew

    Assistant Vice President, Corporate & Foundation Relations Inside this issue... Greetings to Industry. The founding members are American Axle and Manufacturing, Eaton Corpora- tion and John Deere. This applied

  16. Industrial Partnership Prosperity Game{trademark}

    SciTech Connect (OSTI)

    Boyak, K.; Berman, M.; Beck, D.

    1998-02-01T23:59:59.000Z

    Prosperity Games TM are an outgrowth and adaptation move/countermove and seminar War Games. Prosperity Games TM are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education, and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games TM are unique in that both the game format and the player contributions vary from game to game. This report documents the Industry Partnership Prosperity Game sponsored by the Technology Partnerships and Commercialization Center at Sandia National Laboratories. Players came from the Sandia line organizations, the Sandia business development and technology partnerships organizations, the US Department of Energy, academia, and industry The primary objectives of this game were to: explore ways to increase industry partnerships to meet long-term Sandia goals; improve Sandia business development and marketing strategies and tactics; improve the process by which Sandia develops long-term strategic alliances. The game actions and recommendations of these players provided valuable insights as to what Sandia can do to meet these objectives.

  17. Metal-air batteries. (Latest citations from the Aerospace database). Published Search

    SciTech Connect (OSTI)

    NONE

    1997-02-01T23:59:59.000Z

    The bibliography contains citations concerning applications of metal-air batteries. Topics include systems that possess different practical energy densities at specific powers. Coverage includes the operation of air electrodes at different densities and performance results. The systems are used in electric vehicles as a cost-effective method to achieve reliability and efficiency. Zinc-air batteries are covered more thoroughly in a separate bibliography. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  18. Improving inventory and distribution in an aerospace parts and service organization

    E-Print Network [OSTI]

    Wessels, Steven Allan, Jr

    2011-01-01T23:59:59.000Z

    Hamilton Sundstrand has made several changes to their supply chain in recent years, including increased offshore and outsourced production, new service offerings and relocation of facilities, to meet shifting business needs ...

  19. Strategic Plan for Utilizing Low Cost Engineering Resources at Generic Aerospace

    E-Print Network [OSTI]

    Veach, Michael

    2012-12-14T23:59:59.000Z

    In the past, businesses have used several different options in an effort to alleviate engineering resource constraints. These included use of contract engineers, overtime of employees, or utilization of sister facilities ...

  20. The Energy Services Company (ESCO) industry: Analysis of industry and market trends

    SciTech Connect (OSTI)

    Dayton, D.S.; Goldman, C.A.; Pickle, S.J.

    1998-07-01T23:59:59.000Z

    As retail competition accelerates, energy service companies (ESCOs) are confronting major structural changes in the energy services industry and a business environment in which many large customers are re-thinking their energy-related purchasing practices. This paper analyzes recent trends in the ESCO industry and looks specifically at how traditional performance contracting firms are faring during the transition to a new market structure. The authors also discuss trends in both established and emerging ESCO markets. Key findings include: (1) Independent ESCOs are declining both in number and share of the market for energy-efficiency services; (2) Utility-owned ESCOs and retail energy service companies (RESCOs) are an increasingly significant force in the energy-efficiency services market; and (3) Performance contracting, long a hallmark of the ESCO industry, is being overtaken by other forms of energy service contracts in percentage of total revenue.

  1. Industry Supply Chain Development (Ohio)

    Broader source: Energy.gov [DOE]

    Supply Chain Development programs are focused on targeted industries that have significant growth opportunities for Ohio's existing manufacturing sector from emerging energy resources and...

  2. FAQS Reference Guide – Industrial Hygiene

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the November 2007 edition of DOE-STD-1138-2007, Industrial Hygiene Functional Area Qualification Standard.

  3. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    s Nuclear Industry After Fukushima Jingdong YUAN SummaryT he March 2011 Fukushima nuclear accident has had aand speedy responses to Fukushima-like and other unexpected

  4. Industrial energy conservation technology

    SciTech Connect (OSTI)

    Schmidt, P.S.; Williams, M.A. (eds.)

    1980-01-01T23:59:59.000Z

    A separate abstract was prepared for each of the 60 papers included in this volume, all of which will appear in Energy Research Abstracts (ERA); 21 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  5. Public-policy responsibilities in a restructured electricity industry

    SciTech Connect (OSTI)

    Tonn, B.; Hirst, E.; Bauer, D.

    1995-06-01T23:59:59.000Z

    In this report, we identify and define the key public-policy values, objectives, and actions that the US electricity industry currently meets. We also discuss the opportunities for meeting these objectives in a restructured industry that relies primarily on market forces rather than on government mandates. And we discuss those functions that governments might undertake, presumably because they will not be fully met by a restructured industry on its own. These discussions are based on a variety of inputs. The most important inputs came from participants in an April 1995 workshop on Public-Policy Responsibilities and Electric Industry Restructuring: Shaping the Research Agenda. Other sources of information and insights include the reviews of a draft of this report by workshop participants and others and the rapidly growing literature on electric-industry restructuring and its implications. One of the major concerns about the future of the electricity industry is the fate of numerous social and environmental programs supported by today`s electric utilities. Many people worry that a market-driven industry may not meet the public-policy objectives that electric utilities have met in the past. Examples of potentially at-risk programs include demand-side management (DSM), renewable energy, low-income weatherization, and fuel diversity. Workshop participants represented electric utilities, public utility commissions (PUCs), state energy offices, public-interest groups, other energy providers, and the research community.

  6. Industrial Assessments and Why Your Plant Should Have One

    E-Print Network [OSTI]

    Glaser, C. J.; Demetrops, J. P.

    list of member energy service companies, including contact information, and descriptions ofthe services offered. The Electric Power Research Institute (EPRI), a research consortia ofelectric utilities, has a number of technical resources which may... be of interest. EPRI, which has about 700 members, is currently working with over twenty participating utilities through the EPRI Partnership for Industrial Competitiveness (EPIC) program., to provide eligible firms with industrial plant surveys. The EPIC...

  7. Proceedings of the 1992 DOE-industry thermal distribution conference

    SciTech Connect (OSTI)

    Andrews, J.W. [ed.

    1992-06-01T23:59:59.000Z

    The subject of the conference was thermal distribution in small buildings. Thermal distribution systems are the ductwork, piping, or other means used to transport heat or cooling effect from the equipment in which the heat or cooling is produced to the building spaces in which it is used. The small buildings category is defined to include single-family residential and multifamily and commercial buildings with less than 10,000 ft{sup 2} floor area. The 1992 DOE-Industry Thermal Distribution Conference was conceived as the beginning of a process of information transfer between the DOE and the industries having a stake in thermal distribution systems, whereby the DOE can make the industry aware of its thinking and planned directions early enough for changes to be made, and whereby the industries represented can provide this input to the DOE on a timely and informed basis. In accordance with this, the objectives of the Conference were: To present--to a representative group of researchers and industry representative--the current industry thinking and DOE`s current directions for research in small-building thermal distribution. To obtain from industry and the research community a critique of the DOE priorities and additional ideas concerning how DOE can best assist the industry in promoting energy conservation in thermal distribution systems.

  8. Proceedings of the 1992 DOE-industry thermal distribution conference

    SciTech Connect (OSTI)

    Andrews, J.W. (ed.)

    1992-06-01T23:59:59.000Z

    The subject of the conference was thermal distribution in small buildings. Thermal distribution systems are the ductwork, piping, or other means used to transport heat or cooling effect from the equipment in which the heat or cooling is produced to the building spaces in which it is used. The small buildings category is defined to include single-family residential and multifamily and commercial buildings with less than 10,000 ft{sup 2} floor area. The 1992 DOE-Industry Thermal Distribution Conference was conceived as the beginning of a process of information transfer between the DOE and the industries having a stake in thermal distribution systems, whereby the DOE can make the industry aware of its thinking and planned directions early enough for changes to be made, and whereby the industries represented can provide this input to the DOE on a timely and informed basis. In accordance with this, the objectives of the Conference were: To present--to a representative group of researchers and industry representative--the current industry thinking and DOE's current directions for research in small-building thermal distribution. To obtain from industry and the research community a critique of the DOE priorities and additional ideas concerning how DOE can best assist the industry in promoting energy conservation in thermal distribution systems.

  9. The industrial Center at Mississippi State University

    SciTech Connect (OSTI)

    b.K. Hodge; Mary C. Emplaincourt

    2007-04-30T23:59:59.000Z

    The Mississippi State University Industrial Assessment Center (IAC) is one of 26 centers supported by the U.S. Department of Energy (DOE) at universities across the country. The Mississippi State University IAC in existence since 1994 provides plant assessments at no cost to eligible small and mid-sized manufacturers categorized in Standard Industrial Classification (SIC) Codes 20-39. Client eligibility is based on gross sales below $100 million, fewer than 500 employees at the plant, annual utility bills more than $100,000 and less than $2 million, and no in-house professional staff to perform an assessment. IAC assessment benefits include no cost to the clients, increased profitability and competitiveness, confidentiality, non-regulatory, nonobligatory, and student involvement.

  10. Industrial demand side management: A status report

    SciTech Connect (OSTI)

    Hopkins, M.F.; Conger, R.L.; Foley, T.J. [and others

    1995-05-01T23:59:59.000Z

    This report provides an overview of and rationale for industrial demand side management (DSM) programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential energy savings in kilowatt hours. The report presents types and examples of programs and explores elements of successful programs. Two in-depth case studies (from Boise Cascade and Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. A comprehensive bibliography is included, technical assistance programs are listed and described, and a methodology for evaluating potential or actual savings from projects is delineated.

  11. Creating Value Wood Products Industry

    E-Print Network [OSTI]

    Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

  12. Forschungsschwerpunkt S92 Industrial Geometry

    E-Print Network [OSTI]

    Jüttler, Bert

    Forschungsschwerpunkt S92 Industrial Geometry http://www.ig.jku.at Computational Geometry Robot Kinematics Computer Aided Geometric Design Image Processing INDUSTRIAL GEOMETRY Classical Geometry Computer unwanted branches of the implicitly defined curves. Moreover, it is required for many applications, e

  13. Oklahoma Industrial Energy Management Program

    E-Print Network [OSTI]

    Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

    1979-01-01T23:59:59.000Z

    The need for sound energy management is no longer worthy of debate. Action is necessary and much is being done by U.S. industry. Unfortunately, however, the majority of the work is being done by the few large energy intensive industries throughout...

  14. Industrial Wastes as a Fuel

    E-Print Network [OSTI]

    Richardson, G.; Hendrix, W.

    1980-01-01T23:59:59.000Z

    available for coal since it was at one time a major industrial fuel and is still used extensively for electric power generation. However, combustion data for other fuels such as wood and solid materials typically generated as industrial wastes can only...

  15. Petroleum industry assists hurricane relief

    SciTech Connect (OSTI)

    Not Available

    1992-09-14T23:59:59.000Z

    This paper reports that the petroleum industry is aiding victims of last month's Hurricane Andrew with cash, clothing, food, water, and other supplies. Cash contributions announced as of last week totaled more than $2.7 million for distribution in South Florida and South Louisiana. Petroleum industry employees were collecting relief items such as bottled water and diapers for distribution in those areas.

  16. Career Choices: Industry vs. Academia

    E-Print Network [OSTI]

    Rohs, Remo

    Career Choices: Industry vs. Academia Yan Liu Assistant Professor Computer Science Department, IBM TJ Watson Research Center · Now, USC #12;1) What career path did you consider most during your Ph industry, and where can one make the most impact? · Best virtues in all jobs ­ Hardworking ­ Good attitude

  17. Characterization and modeling of ferroelectric materials for high pressure, high temperature applications

    E-Print Network [OSTI]

    VALADEZ PEREZ, JUAN CARLOS

    2012-01-01T23:59:59.000Z

    Applications in the Aerospace and automotive industrytemperature, etc. In the automotive industry is a similarThe automotive and aerospace industries also require high

  18. Title: Designing Energy-Efficient Information Processing Systems Abstract: The semiconductor industry is facing some extraordinary challenges, including process and

    E-Print Network [OSTI]

    Title: Designing Energy-Efficient Information Processing Systems Abstract: The semiconductor. It is against this backdrop that I provide examples of some techniques used to improve the energy efficiency's research focuses on energy-efficient computing, energy storage systems, low power electronics and design

  19. BUILDING STRONG Industry Listening

    E-Print Network [OSTI]

    US Army Corps of Engineers

    of Expertise · Environmental Team · Dredging/costing Team · AIS Team · Port Capacity Team · Public include costs associated with deepening and widening deep-draft harbors; the ability of the waterways: · Costs associated with deepening and widening deep-draft harbors; · Ability of waterways and ports

  20. Effectively Visualizing Multi-Valued Flow Data using Color and Texture Timothy Urness1

    E-Print Network [OSTI]

    Marusic, Ivan

    .3 [Computer Graphics]: Picture/Image Generation; I.3.7 [Computer Graphics]: Three-Dimensional Graphics have a major impact on many industries including aerospace, transportation, energy, and chemical

  1. Quantifying the Uncertainty in Estimates of World Conventional Oil Resources

    E-Print Network [OSTI]

    Tien, Chih-Ming

    2010-07-14T23:59:59.000Z

    judgments have been used to provide useful information in forecasting, decision-making, and assessing risks, and its application 15 15 fields are quite diverse, including aerospace, medicine, the nuclear industry, veterinary science, agriculture...

  2. Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry Swindall, VP, Business & Industry Development, WI Economic Development Corporation Manuel Sattig, BMW Group

  3. Market development directory for solar industrial process heat systems

    SciTech Connect (OSTI)

    None

    1980-02-01T23:59:59.000Z

    The purpose of this directory is to provide a basis for market development activities through a location listing of key trade associations, trade periodicals, and key firms for three target groups. Potential industrial users and potential IPH system designers were identified as the prime targets for market development activities. The bulk of the directory is a listing of these two groups. The third group, solar IPH equipment manufacturers, was included to provide an information source for potential industrial users and potential IPH system designers. Trade associates and their publications are listed for selected four-digit Standard Industrial Code (SIC) industries. Since industries requiring relatively lower temperature process heat probably will comprise most of the near-term market for solar IPH systems, the 80 SIC's included in this chapter have process temperature requirements less than 350/sup 0/F. Some key statistics and a location list of the largest plants (according to number of employees) in each state are included for 15 of the 80 SIC's. Architectural/engineering and consulting firms are listed which are known to have solar experience. Professional associated and periodicals to which information on solar IPH sytstems may be directed also are included. Solar equipment manufacturers and their associations are listed. The listing is based on the SERI Solar Energy Information Data Base (SEIDB).

  4. Energy use and CO2 emissions of China’s industrial sector from a global perspective

    SciTech Connect (OSTI)

    Zhou, Sheng; Kyle, G. Page; Yu, Sha; Clarke, Leon E.; Eom, Jiyong; Luckow, Patrick W.; Chaturvedi, Vaibhav; Zhang, Xiliang; Edmonds, James A.

    2013-07-10T23:59:59.000Z

    The industrial sector has accounted for more than 50% of China’s final energy consumption in the past 30 years. Understanding the future emissions and emissions mitigation opportunities depends on proper characterization of the present-day industrial energy use, as well as industrial demand drivers and technological opportunities in the future. Traditionally, however, integrated assessment research has handled the industrial sector of China in a highly aggregate form. In this study, we develop a technologically detailed, service-oriented representation of 11 industrial subsectors in China, and analyze a suite of scenarios of future industrial demand growth. We find that, due to anticipated saturation of China’s per-capita demands of basic industrial goods, industrial energy demand and CO2 emissions approach a plateau between 2030 and 2040, then decrease gradually. Still, without emissions mitigation policies, the industrial sector remains heavily reliant on coal, and therefore emissions-intensive. With carbon prices, we observe some degree of industrial sector electrification, deployment of CCS at large industrial point sources of CO2 emissions at low carbon prices, an increase in the share of CHP systems at industrial facilities. These technological responses amount to reductions of industrial emissions (including indirect emission from electricity) are of 24% in 2050 and 66% in 2095.

  5. AVLIS industrial access program

    SciTech Connect (OSTI)

    Not Available

    1984-11-15T23:59:59.000Z

    This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the project in a competitive procurement situation. As a result, costs and procurement risks are both reduced because the products provided come from within the AVLIS suppliers' experience base. At the same time, suppliers can benefit by the potential to participate in AVLIS technology spin-off markets. 35 figures.

  6. Assessing U.S. ESCO industry performance and market trends: Results from the NAESCO database project

    SciTech Connect (OSTI)

    Osborn, Julie; Goldman, Chuck; Hopper, Nicole; Singer, Terry

    2002-05-15T23:59:59.000Z

    The U.S. Energy Services Company (ESCO) industry is often cited as the most successful model for the private sector delivery of energy-efficiency services. This study documents actual performance of the ESCO industry in order to provide policymakers and investors with objective informative and customers with a resource for benchmarking proposed projects relative to industry performance. We have assembled a database of nearly 1500 case studies of energy-efficiency projects - the most comprehensive data set of the U.S. ESCO industry available. These projects include $2.55B of work completed by 51 ESCOs and span much of the history of this industry.

  7. AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A

    E-Print Network [OSTI]

    AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A Donald Bradley Morgan Bruns Adam Fleming Jay Ling on the automotive industry, specifically, large-scale manufacturers of automobiles. The automotive industry of the automotive industry. This is followed by an analysis of the industry's structural characteristics using

  8. Energy-Efficiency Improvement Opportunities for the Textile Industry

    SciTech Connect (OSTI)

    China Energy Group; Hasanbeigi, Ali

    2010-09-29T23:59:59.000Z

    The textile industry is one of the most complicated manufacturing industries because it is a fragmented and heterogeneous sector dominated by small and medium enterprises (SMEs). Energy is one of the main cost factors in the textile industry. Especially in times of high energy price volatility, improving energy efficiency should be a primary concern for textile plants. There are various energy-efficiency opportunities that exist in every textile plant, many of which are cost-effective. However, even cost-effective options often are not implemented in textile plants mostly because of limited information on how to implement energy-efficiency measures, especially given the fact that a majority of textile plants are categorized as SMEs and hence they have limited resources to acquire this information. Know-how on energy-efficiency technologies and practices should, therefore, be prepared and disseminated to textile plants. This guidebook provides information on energy-efficiency technologies and measures applicable to the textile industry. The guidebook includes case studies from textile plants around the world and includes energy savings and cost information when available. First, the guidebook gives a brief overview of the textile industry around the world, with an explanation of major textile processes. An analysis of the type and the share of energy used in different textile processes is also included in the guidebook. Subsequently, energy-efficiency improvement opportunities available within some of the major textile sub-sectors are given with a brief explanation of each measure. The conclusion includes a short section dedicated to highlighting a few emerging technologies in the textile industry as well as the potential for the use of renewable energy in the textile industry.

  9. Laboratory/industry partnerships for environmental remediation

    SciTech Connect (OSTI)

    Beskid, N.J.; Zussman, S.K.

    1994-09-01T23:59:59.000Z

    There are two measures of ``successful`` technology transfer in DOE`s environmental restoration and waste management program. The first is remediation of DOE sites, and the second is commercialization of an environmental remediation process or product. The ideal case merges these two in laboratory/industry partnerships for environmental remediation. The elements to be discussed in terms of their effectiveness in aiding technology transfer include: a decision-making champion; timely and sufficient funding; well organized technology transfer function; well defined DOE and commercial markets; and industry/commercial partnering. Several case studies are presented, including the successful commercialization of a process for vitrification of low-level radioactive waste, the commercial marketing of software for hazardous waste characterization, and the application of a monitoring technique that has won a prestigious technical award. Case studies will include: vitrification of low-level radioactive waste (GTS Duratek, Columbia, MD); borehole liner for emplacing instrumentation and sampling groundwater (Science and Engineering Associates, Inc., Santa Fe, NM); electronic cone penetrometer (Applied Research Associates, Inc., South Royalton, VT); and software for hazardous waste monitoring ConSolve, Inc. (Lexington, MA). The roles of the Department of Energy and Argonne National Laboratory in these successes will be characterized.

  10. Industrial universal electrometer

    DOE Patents [OSTI]

    Cordaro, Joseph V. (Martinez, GA); Wood, Michael B. (Aiken, SC)

    2012-07-03T23:59:59.000Z

    An electrometer for use in measuring current is provided. The electrometer includes an enclosure capable of containing various components of the electrometer. A pre-amplifier is present and is one of the components of the electrometer. The pre-amplifier is contained by the enclosure. The pre-amplifier has a pre-amplifier enclosure that contains the pre-amplifier and provides radio frequency shielding and magnetic shielding to the pre-amplifier.

  11. MECH 386 INDUSTRIAL FLUID MECHANICS INDUSTRIAL FLUID MECHANICS

    E-Print Network [OSTI]

    technologies - Wind turbine - Wave energy (Wells turbine) - Tidal power 7. Flow in porous media - Darcy's law 8 - Positive displacement pumps - Systems of pumps - Industrial practice (Guest speaker) 6. Renewable energy

  12. The industrial ecology of the iron casting industry

    E-Print Network [OSTI]

    Jones, Alissa J. (Alissa Jean)

    2007-01-01T23:59:59.000Z

    Metal casting is an energy and materials intensive manufacturing process, which is an important U.S. industry. This study analyzes iron casting, in particular, for possible improvements that will result in greater efficiencies ...

  13. Geothermal industry employment: Survey results & analysis

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    The Geothermal Energy Association (GEA) is ofteh asked about the socioeconomic and employment impact of the industry. Since available literature dealing with employment involved in the geothermal sector appeared relatively outdated, unduly focused on certain activities of the industry (e.g. operation and maintenance of geothermal power plants) or poorly reliable, GEA, in consultation with the DOE, decided to conduct a new employment survey to provide better answers to these questions. The main objective of this survey is to assess and characterize the current workforce involved in geothermal activities in the US. Several initiatives have therefore been undertaken to reach as many organizations involved in geothermal activities as possible and assess their current workforce. The first section of this document describes the methodology used to contact the companies involved in the geothermal sector. The second section presents the survey results and analyzes them. This analysis includes two major parts. The first part analyzes the survey responses, presents employment numbers that were captured and describes the major characteristics of the industry that have been identified. The second part of the analysis estimates the number of workers involved in companies that are active in the geothermal business but did not respond to the survey or could not be reached. Preliminary conclusions and the study limits and restrictions are then presented. The third section addresses the potential employment impact related to manufacturing and construction of new geothermal power facilities. Indirect and induced economic impacts related with such investment are also investigated.

  14. Industrial Waste Landfill IV upgrade package

    SciTech Connect (OSTI)

    Not Available

    1994-03-29T23:59:59.000Z

    The Y-12 Plant, K-25 Site, and ORNL are managed by DOE`s Operating Contractor (OC), Martin Marietta Energy Systems, Inc. (Energy Systems) for DOE. Operation associated with the facilities by the Operating Contractor and subcontractors, DOE contractors and the DOE Federal Building result in the generation of industrial solid wastes as well as construction/demolition wastes. Due to the waste streams mentioned, the Y-12 Industrial Waste Landfill IV (IWLF-IV) was developed for the disposal of solid industrial waste in accordance to Rule 1200-1-7, Regulations Governing Solid Waste Processing and Disposal in Tennessee. This revised operating document is a part of a request for modification to the existing Y-12 IWLF-IV to comply with revised regulation (Rule Chapters 1200-1-7-.01 through 1200-1-7-.08) in order to provide future disposal space for the ORR, Subcontractors, and the DOE Federal Building. This revised operating manual also reflects approved modifications that have been made over the years since the original landfill permit approval. The drawings referred to in this manual are included in Drawings section of the package. IWLF-IV is a Tennessee Department of Environmental and Conservation/Division of Solid Waste Management (TDEC/DSWM) Class 11 disposal unit.

  15. The US petroleum refining industry in the 1980's

    SciTech Connect (OSTI)

    Not Available

    1990-10-11T23:59:59.000Z

    As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.

  16. Canada's Voluntary Industrial Energy Conservation Program

    E-Print Network [OSTI]

    Wolf, C. A., Jr.

    1980-01-01T23:59:59.000Z

    Industrial Energy Conservation in Canada is organized and promoted through a voluntary program that is administered by industry. Industry is divided into fifteen sectors, each of which is represented by a Voluntary Task Force. Information exchange...

  17. Heat Recovery in the Forge Industry

    E-Print Network [OSTI]

    Shingledecker, R. B.

    1982-01-01T23:59:59.000Z

    Department of Energy figures reveal that in 1979 the forging and stamping operations were the primary consumers of energy (27%) within the 'Fabricated Metals Products Industry' (SIC 34). Industrial furnaces utilized by the forging industry often...

  18. Industrial Geospatial Analysis Tool for Energy Evaluation

    E-Print Network [OSTI]

    Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

    2013-01-01T23:59:59.000Z

    of manufacturing industries based on each type of industries using information from DOE's Industrial Assessment Center database (IAC-DB) and DOE's Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition...

  19. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2011/2012 September).................1 REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH (30).....................................................................................................2 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  20. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2010/2011 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH)...................................................................................................1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  1. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2009/2010 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING (30 CREDITS)...............1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  2. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2013/2014 September..............................3 C. COURSE REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS............................4 E. DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH

  3. Industrial Heat Pumps: Where and When 

    E-Print Network [OSTI]

    Ranade, S. M.; Chao, Y. T.

    1989-01-01T23:59:59.000Z

    A brief review of the types of industrial heat pumps is presented. General guidelines are provided for appropriate placement of industrial heat pumps. Industrial applications are used as examples to illustrate key points.

  4. Effective Transfer of Industrial Energy Conservation Technologies

    E-Print Network [OSTI]

    Clement, M.; Vallario, R. W.

    1983-01-01T23:59:59.000Z

    , and acceptance by industry of new energy conserving technologies. These new technologies were developed through cost sharing programs between the Department of Energy and private industry. These joint efforts reduced the risk to industry, thus making them willing...

  5. Iron and steel industry process model

    SciTech Connect (OSTI)

    Sparrow, F.T.; Pilati, D.; Dougherty, T.; McBreen, E.; Juang, L.L.

    1980-01-01T23:59:59.000Z

    The iron and steel industry process model depicts expected energy-consumption characteristics of the iron and steel industry and ancillary industries for the next 25 years by means of a process model of the major steps in steelmaking, from ore mining and scrap recycling to the final finishing of carbon, alloy, and stainless steel into steel products such as structural steel, slabs, plates, tubes, and bars. Two plant types are modeled: fully integrated mills and mini-mills. User-determined inputs into the model are as follows: projected energy and materials prices; projected costs of capacity expansion and replacement; energy-conserving options, both operating modes and investments; the internal rate of return required on investment; and projected demand for finished steel. Nominal input choices in the model for the inputs listed above are as follows: National Academy of Sciences Committee on Nuclear and Alternative Energy Systems Demand Panel nominal energy-price projections for oil, gas, distillates, residuals, and electricity and 1975 actual prices for materials; actual 1975 costs; new technologies added; 15% after taxes; and 1975 actual demand with 1.5%/y growth. The model reproduces the base-year (1975) actual performance of the industry; then, given the above nominal input choices, it projects modes of operation and capacity expansion that minimize the cost of meeting the given final demands for each of 5 years, each year being the midpoint of a 5-year interval. The output of the model includes the following: total energy use and intensity (Btu/ton) by type, by process, and by time period; energy conservation options chosen; utilization rates for existing capacity; capital-investment decisions for capacity expansion.

  6. Industrial Energy Audit Guidebook: Guidelines for Conducting an Energy Audit in Industrial Facilities

    SciTech Connect (OSTI)

    Hasanbeigi, Ali; Price, Lynn

    2010-10-07T23:59:59.000Z

    Various studies in different countries have shown that significant energy-efficiency improvement opportunities exist in the industrial sector, many of which are cost-effective. These energy-efficiency options include both cross-cutting as well as sector-specific measures. However, industrial plants are not always aware of energy-efficiency improvement potentials. Conducting an energy audit is one of the first steps in identifying these potentials. Even so, many plants do not have the capacity to conduct an effective energy audit. In some countries, government policies and programs aim to assist industry to improve competitiveness through increased energy efficiency. However, usually only limited technical and financial resources for improving energy efficiency are available, especially for small and medium-sized enterprises. Information on energy auditing and practices should, therefore, be prepared and disseminated to industrial plants. This guidebook provides guidelines for energy auditors regarding the key elements for preparing for an energy audit, conducting an inventory and measuring energy use, analyzing energy bills, benchmarking, analyzing energy use patterns, identifying energy-efficiency opportunities, conducting cost-benefit analysis, preparing energy audit reports, and undertaking post-audit activities. The purpose of this guidebook is to assist energy auditors and engineers in the plant to conduct a well-structured and effective energy audit.

  7. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    Brief 2013-9 January 2013 China’s Nuclear Industry Aftera significant impact on the future of China’s nuclear power.the importance of safety as China builds more nuclear power

  8. Energy Savings in Industrial Buildings 

    E-Print Network [OSTI]

    Zhou, A.; Tutterow, V.; Harris, J.

    2009-01-01T23:59:59.000Z

    , and electricity for equipment such as pumps, air compressors, and fans. Lesser, yet significant, amounts of energy are used for industrial buildings – heating, ventilation, and air conditioning (HVAC), lighting and facility use (such as office equipment). Due...

  9. CALIFORNIA ENERGY PETROLEUM INDUSTRY INFORMATION

    E-Print Network [OSTI]

    PETROLEUM AND NON-PETROLEUM ................................................... 40 PRODUCT DEFINITIONS Major Petroleum Product Storer and Terminal Weekly Report Major petroleum product storers, terminalCALIFORNIA ENERGY COMMISSION PETROLEUM INDUSTRY INFORMATION REPORTING ACT (PIIRA) PROGRAM REPORTING

  10. Industrial Plans for AEO2014

    U.S. Energy Information Administration (EIA) Indexed Site

    you for your attention 10 Industrial Team Washington DC, July 30, 2013 Macro Team: Kay Smith (202) 586-1132 | kay.smith@eia.gov Vipin Arora (202) 586-1048 | vipin.arora@eia.gov...

  11. Three Essays on Industrial Organization

    E-Print Network [OSTI]

    Lee, Yang Seung

    2008-12-18T23:59:59.000Z

    The dissertation discusses issues in the field of industrial organization. When the government provides better infrastructure to competing firms for innovation, private firms' R&D expenditures are affected. When the ...

  12. Hazardous and Industrial Waste (Minnesota)

    Broader source: Energy.gov [DOE]

    This section describes standards that must be met by facilities generating and processing hazardous and industrial waste, as well as required permits for the construction and operation of such a...

  13. Uncertainty, investment, and industry evolution

    E-Print Network [OSTI]

    Caballero, Ricardo J.

    1992-01-01T23:59:59.000Z

    We study the effects of aggregate and idiosyncratic uncertainty on the entry of firms, total investment, and prices in a competitive industry with irreversible investment. We first use standard dynamic programming methods ...

  14. Outlook for Industrial Energy Benchmarking 

    E-Print Network [OSTI]

    Hartley, Z.

    2000-01-01T23:59:59.000Z

    OUTLOOK FOR INDUSTRIAL ENERGY BENCHMARKING Zoe Hartley Environmental Protection Specialist U.S. Environmental Protection Agency Washington, DC ABSTRACT The U.S. Environmental Protection Agency is exploring options to sponsor an ~d~ ~~gy...

  15. Changing Trends in Telecommunications Industry

    E-Print Network [OSTI]

    Sathyanarayanan, Ramachandran

    2010-12-17T23:59:59.000Z

    The mobile telecommunication industry is one of the fastest growing and continually changing markets in the world today. The greatest achievement of wireless technology is that it has made communications possible in the ...

  16. Innovative Energy Efficient Industrial Ventilation

    E-Print Network [OSTI]

    Litomisky, A.

    2005-01-01T23:59:59.000Z

    factories, we found striking dichotomy between the classical “static” design of ventilation systems and constantly changing workflow and business demands. Using data from real factories, we are able to prove that classical industrial ventilation design...

  17. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    2013-9 January 2013 China’s Nuclear Industry After FukushimaMarch 2011 Fukushima nuclear accident has had a significanton the future of China’s nuclear power. First, it highlights

  18. Industrial Mathematics and Inverse Problems

    E-Print Network [OSTI]

    Fulmek, Markus

    #12;The Industrial Mathematics Structure in Linz 5 #12;The Blast Furnace Process 6 #12;Aims": Looking for causes of an observed or desired effect! A.Tikhonov ( 1936), geophysical problems. F

  19. Outlook for Industrial Energy Benchmarking

    E-Print Network [OSTI]

    Hartley, Z.

    The U.S. Environmental Protection Agency is exploring options to sponsor an industrial energy efficiency benchmarking study to identify facility specific, cost-effective best practices and technologies. Such a study could help develop a common...

  20. Integrated Industrial Wood Chip Utilization

    E-Print Network [OSTI]

    Owens, E. T.

    1984-01-01T23:59:59.000Z

    The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

  1. Electric Utility Industrial Conservation Programs

    E-Print Network [OSTI]

    Norland, D. L.

    1983-01-01T23:59:59.000Z

    The Alliance to Save Energy conducted a study, funded by the John A. Hartford Foundation, of industrial and commercial electricity conservation opportunities in the service territory of Arkansas Power and Light Company (AP&L). The study determined...

  2. Nanocoatings for High-Efficiency Industrial Hydraulic and Tooling Systems

    SciTech Connect (OSTI)

    Clifton B. Higdon III

    2011-01-07T23:59:59.000Z

    Industrial manufacturing in the U.S. accounts for roughly one third of the 98 quadrillion Btu total energy consumption. Motor system losses amount to 1.3 quadrillion Btu, which represents the largest proportional loss of any end-use category, while pumps alone represent over 574 trillion BTU (TBTU) of energy loss each year. The efficiency of machines with moving components is a function of the amount of energy lost to heat because of friction between contacting surfaces. The friction between these interfaces also contributes to downtime and the loss of productivity through component wear and subsequent repair. The production of new replacement parts requires additional energy. Among efforts to reduce energy losses, wear-resistant, low-friction coatings on rotating and sliding components offer a promising approach that is fully compatible with existing equipment and processes. In addition to lubrication, one of the most desirable solutions is to apply a protective coating or surface treatment to rotating or sliding components to reduce their friction coefficients, thereby leading to reduced wear. Historically, a number of materials such as diamond-like carbon (DLC), titanium nitride (TiN), titanium aluminum nitride (TiAlN), and tungsten carbide (WC) have been examined as tribological coatings. The primary objective of this project was the development of a variety of thin film nanocoatings, derived from the AlMgB14 system, with a focus on reducing wear and friction in both industrial hydraulics and cutting tool applications. Proof-of-concept studies leading up to this project had shown that the constituent phases, AlMgB14 and TiB2, were capable of producing low-friction coatings by pulsed laser deposition. These coatings combine high hardness with a low friction coefficient, and were shown to substantially reduce wear in laboratory tribology tests. Selection of the two applications was based largely on the concept of improved mechanical interface efficiencies for energy conservation. In mobile hydraulic systems, efficiency gains through low friction would translate into improved fuel economy and fewer greenhouse gas emissions. Stationary hydraulic systems, accordingly, would consume less electrical power. Reduced tooling wear in machining operations would translate to greater operating yields, while lowering the energy consumed during processing. The AlMgB14 nanocoatings technology progressed beyond baseline laboratory tests into measurable energy savings and enhancements to product durability. Three key hydraulic markets were identified over the course of the project that will benefit from implementation: industrial vane pumps, orbiting valve-in-star hydraulic motors, and variable displacement piston pumps. In the vane pump application, the overall product efficiency was improved by as much as 11%. Similar results were observed with the hydraulic motors tested, where efficiency gains of over 10% were noted. For variable displacement piston pumps, overall efficiency was improved by 5%. For cutting tools, the most significant gains in productivity (and, accordingly, the efficiency of the machining process as a whole) were associated with the roughing and finishing of titanium components for aerospace systems. Use of the AlMgB14 nanocoating in customer field tests has shown that the coated tools were able to withstand machining rates as high as 500sfm (limited only by the substrate material), with relatively low flank wear when compared to other industrial offerings. AlMgB14 coated tools exhibited a 60% improvement over similarly applied TiAlN thin films. Furthermore, AlMgB14-based coatings in these particular tests lasted twice as long than their TiAlN counterparts at the 500sfm feed rates. Full implementation of the technology into the industrial hydraulic and cutting tool markets equates to a worldwide energy savings of 46 trillion BTU/year by 2030. U.S.-based GHG emissions associated with the markets identified would fall accordingly, dropping by as much as 50,000 tonnes annually.

  3. EPRI's Industrial Energy Management Program

    E-Print Network [OSTI]

    Mergens, E.; Niday, L.

    EPRI's INDUSTRIAL ENERGY MANAGEMENT PROGRAM ED MERGENS MANAGER EPRI's CHEMICALS & PETROLEUM OFFICE HOUSTON, TEXAS ABSTRACT The loss of American industry jobs to foreign competition is made worse by national concerns over fuels combustion... are funded at a level in excess of SlO million annually. By providing technical guidance and sponsoring research and development projects, these Centers and Offices are a key element in EPRI's role of improving the value of electricity to consumers...

  4. Colorado State University Industrial Assessment Center Saves...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Assessment Center, inspects equipment at a manufacturing facility during an energy audit. | Photo courtesy of University of Missouri IAC. Industrial Assessment Centers...

  5. Emerging energy-efficient technologies for industry

    E-Print Network [OSTI]

    2001-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for2000. “Emerging Energy-Efficient Industrial Technologies,”Emerging Energy-Efficient Technologies for Industry Ernst

  6. Emerging Energy-Efficient Technologies for Industry

    E-Print Network [OSTI]

    2005-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for200 emerging energy-efficient technologies in industry, of2000. “Emerging Energy-Efficient Industrial Technologies,”

  7. Emerging energy-efficient technologies for industry

    E-Print Network [OSTI]

    2004-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for2000. “Emerging Energy-Efficient Industrial Technologies,”Emerging Energy-Efficient Technologies for Industry Ernst

  8. Green Industrial Policy: Trade and Theory

    E-Print Network [OSTI]

    Karp, Larry; Stevenson, Megan

    2012-01-01T23:59:59.000Z

    Papers Year 2012 Paper 1126 Green Industrial Policy: Trade© 2012 by author(s). Green Industrial Policy: Trade andreality and the potential for green indus- trial policy. We

  9. Industrial and Organizational Psychology Doctoral Program Handbook

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Industrial and Organizational Psychology Doctoral Program Handbook University of Central Florida chosen the University of Central Florida for your graduate training in Industrial and Organizational

  10. ITP Industrial Distributed Energy: Distributed Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ITP Industrial Distributed Energy: Distributed Energy Program Project Profile: Verizon Central Office Building ITP Industrial Distributed Energy: Distributed Energy Program Project...

  11. Tax-Exempt Industrial Revenue Bonds (Kansas)

    Broader source: Energy.gov [DOE]

    Tax-Exempt Industrial Revenue Bonds are issued by cities and counties for the purchase, construction, improvement or remodeling of a facility for agricultural, commercial, hospital, industrial,...

  12. EIS-0428: Mississippi Gasification, LLC, Industrial Gasification...

    Broader source: Energy.gov (indexed) [DOE]

    8: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS EIS-0428: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS...

  13. ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aluminum Industry Vision: Sustainable Solutions for a Dynamic World ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions for a Dynamic World alumvision.pdf More Documents...

  14. EIS-0429: Indiana Gasification, LLC, Industrial Gasification...

    Office of Environmental Management (EM)

    9: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport, IN and CO2 Pipeline EIS-0429: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport,...

  15. Joint Capability Technology Demonstration (JCTD) Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Agenda outlines the activities of the 2014...

  16. Industrial Energy Efficiency and Climate Change Mitigation

    E-Print Network [OSTI]

    Worrell, Ernst

    2009-01-01T23:59:59.000Z

    mitigate 21 MtCO 2 . Cogeneration (also called Combined Heatefficiencies. Industrial cogeneration is an important partpotential for industrial cogeneration is estimated at almost

  17. Nuclear Arms Control R&D Consortium includes Los Alamos

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Arms Control R&D Consortium includes Los Alamos Nuclear Arms Control R&D Consortium includes Los Alamos A consortium led by the University of Michigan that includes LANL as...

  18. amenagement durables industrie: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CLUSTERS? INDUSTRY CLUSTERS IN MINNESOTA INDUSTRY CLUSTER APPROACHES IN MINNESOTA INDUSTRY CLUSTER Levinson, David M. 379 Energy Conservation in China North Industries...

  19. Progress in the development of lightweight nickel electrode for aerospace applications

    SciTech Connect (OSTI)

    Britton, D.L.

    1992-03-01T23:59:59.000Z

    The NASA Lewis Research Center is currently developing nickel electrodes for nickel-hydrogen (Ni-H2) cells and batteries. These electrodes are lighter in weight and have higher specific energy than the heavy sintered state of the art nickel electrodes. In the present approach, lightweight materials or plaques are used as conductive supports for the nickel hydroxide active material. These plaques (fiber, felt, and nickel plated plastic) are fabricated into nickel electrodes by electrochemically impregnating them with active material. Initial performance tests include capacity measurements at five discharge levels, C/2, 1.0C, 1.37C, 2.0C, and 2.74C. The electrodes that pass the initial tests are life cycle tested at 40 and 80 percent depths of discharge (DOD). Different formulations of nickel fiber materials obtained from several manufacturers are currently being tested as possible candidates for nickel electrodes. Over 7,000 cycles of life cycle testing have been accumulated at 40 percent DOD, using the lightweight fiber electrode in a boiler plate Ni-H2 cell with stable voltage.

  20. Expert system for testing industrial processes and determining sensor status

    DOE Patents [OSTI]

    Gross, K.C.; Singer, R.M.

    1998-06-02T23:59:59.000Z

    A method and system are disclosed for monitoring both an industrial process and a sensor. The method and system include determining a minimum number of sensor pairs needed to test the industrial process as well as the sensor for evaluating the state of operation of both. The technique further includes generating a first and second signal characteristic of an industrial process variable. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the pair of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 24 figs.

  1. Expert system for testing industrial processes and determining sensor status

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Singer, Ralph M. (Naperville, IL)

    1998-01-01T23:59:59.000Z

    A method and system for monitoring both an industrial process and a sensor. The method and system include determining a minimum number of sensor pairs needed to test the industrial process as well as the sensor for evaluating the state of operation of both. The technique further includes generating a first and second signal characteristic of an industrial process variable. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the pair of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test.

  2. A Roadmap to Success: Hiring, Retaining, and Including People...

    Broader source: Energy.gov (indexed) [DOE]

    A Roadmap to Success: Hiring, Retaining, and Including People with Disabilities A Roadmap to Success: Hiring, Retaining, and Including People with Disabilities December 5, 2014...

  3. [Article 1 of 7: Motivates and Includes the Consumer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and include the consumer exist. Some examples include advanced two-way metering (AMI), demand response (DR), and distributed energy resources (DER). A common misconception is...

  4. Including Retro-Commissioning in Federal Energy Savings Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Including Retro-Commissioning in Federal Energy Savings Performance Contracts Including Retro-Commissioning in Federal Energy Savings Performance Contracts Document describes...

  5. Investigations into the Nature of Halogen Bonding Including Symmetry...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    into the Nature of Halogen Bonding Including Symmetry Adapted Perturbation Theory Analyses. Investigations into the Nature of Halogen Bonding Including Symmetry Adapted...

  6. The Department of Energy`s Solar Industrial Program: 1994 review

    SciTech Connect (OSTI)

    NONE

    1995-03-01T23:59:59.000Z

    This is a report on DOE`s Solar Industrial Program. The topics of the report include an overview of the program, it`s participants and it`s objectives; solar detoxification--using solar energy to destroy environmental contaminants in air, water, and soil; solar process heat--generating industrial quantities of hot water, steam, and hot air from solar energy; and advanced processes--using concentrated solar energy to manufacture high-technology materials and develop new industrial processes.

  7. MINING VENTILATION CONTROL: A NEW INDUSTRIAL CASE FOR WIRELESS AUTOMATION

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    % of the energy consumed by the mining process goes into the ventilation (including heating the air). It is clearMINING VENTILATION CONTROL: A NEW INDUSTRIAL CASE FOR WIRELESS AUTOMATION E. Witrant1, A. D This paper serves as an introduction to Special Session on Ventilation Control in Large-Scale Systems. We de

  8. Economic Impact PermianBasin'sOil&GasIndustry

    E-Print Network [OSTI]

    Zhang, Yuanlin

    of Petroleum Evaluation Engineers (SPEE) parameters for evaluating Resource Plays 53 Appendix C: Detailed Play to traditional economic impacts, this report includes a petroleum engineering-based analysis that providesEconomic Impact PermianBasin'sOil&GasIndustry #12;The Economic Impact of the Permian Basin's Oil

  9. Development of Bulk Nanocrystalline Cemented Tungsten Carbide for Industrial Applicaitons

    SciTech Connect (OSTI)

    Z. Zak Fang, H. Y. Sohn

    2009-03-10T23:59:59.000Z

    This report contains detailed information of the research program entitled "Development of Bulk Nanocrystalline Cemented Tungsten Carbide Materials for Industrial Applications". The report include the processes that were developed for producing nanosized WC/Co composite powders, and an ultrahigh pressure rapid hot consolidation process for sintering of nanosized powders. The mechanical properties of consolidated materials using the nanosized powders are also reported.

  10. Industrial Geospatial Analysis Tool for Energy Evaluation (IGATE-E)

    SciTech Connect (OSTI)

    Alkadi, Nasr E [ORNL] [ORNL; Starke, Michael R [ORNL] [ORNL; Ma, Ookie [DOE EERE] [DOE EERE; Nimbalkar, Sachin U [ORNL] [ORNL; Cox, Daryl [ORNL] [ORNL

    2013-01-01T23:59:59.000Z

    IGATE-E is an energy analysis tool for industrial energy evaluation. The tool applies statistical modeling to multiple publicly available datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using DOE s Industrial Assessment Center database (IAC-DB) and DOE s Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to other commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool provides validation against DOE s EIA-MECS state level energy estimations and permits several statistical examinations. IGATE-E is intended to be a decision support and planning tool to a wide spectrum of energy analysts, researchers, government organizations, private consultants, industry partners, and alike.

  11. Economic analysis of the European cement industry

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Economic analysis of the European cement industry Marcel Boyer1 and JeanPierre Ponssard2 December 2013. The methodology is applied to the European cement industry over the period 20042012 (Part I) and over the next and industry experts. Key words: return on assets, capital intensive industry, business cycle, European cement

  12. What does an Industrial Engineer really do???

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    What does an Industrial Engineer really do??? #12;What you will learn · What Industrial Engineering is · Examples of Industrial Engineering (IE) activities · The advantages of an IE college degree #12;Engineering does that engineer do? Where? #12;Industrial Engineers Find a Better Way... · A better way to make

  13. Mechanical and Industrial Engineering John Stuart

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical and Industrial Engineering John Stuart Paul Washburn Co-Chairs MIE IAB Meeting #12;2Mechanical and Industrial Engineering Dean Tim Anderson #12;3Mechanical and Industrial Engineering Strategic vision for growing College Goal Method Current resources #12;4Mechanical and Industrial Engineering

  14. Faculty of Engineering Industrial and Manufacturing

    E-Print Network [OSTI]

    Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

  15. Industrial & Systems Engineering Areas of Engineering Interests

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

  16. Pollution Prevention and New Industrial Estates

    E-Print Network [OSTI]

    Heal, Kate

    1 Pollution Prevention and New Industrial Estates Chris Pittner Associate Director WSP 21 May 2012 POLLUTION PREVENTION AND NEW INDUSTRIAL ESTATES Pollution within Industrial Estates Legal Framework and Guidance Surface Water Management Project Examples #12;2 POLLUTION WITHIN INDUSTRIAL ESTATES Sources Poor

  17. Agricultural productivity and industrialization: A reformulation

    E-Print Network [OSTI]

    Bandyopadhyay, Antar

    Agricultural productivity and industrialization: A reformulation Debasis Mondal Sept 20, 2014 Abstract In this paper we examine the role of agricultural productivity on the process of industrialization industrialization by releasing labor from agriculture to industry. In fact, when agriculture is highly productive

  18. Industrial hygiene concerns associated with oil shale development

    SciTech Connect (OSTI)

    Ettinger, H.J.

    1980-01-01T23:59:59.000Z

    Health protection concerns (including industrial hygiene, safety, and occupational medicine) must be evaluated to insure that development of the oil shale industry proceeds without significant risk to the health of the workers involved. These concerns need to be identified in the early stages of developing this industry. To provide a basis for discussing potential health protection concerns related to oil shale, it is necessary to briefly discuss the magnitude and characteristics of this resource; the alternate proposed technologies; and the unit operations which make up the operating system. This subject has been detailed in many publications, among them reports prepared for the Environmental Protection Agency. This discussion will be limited to providing sufficient background to put industrial hygiene and other health protection concerns in perspective, and will include a brief description of typical technologies under consideration. It will not provide a detailed description of these technologies, or attempt to cover all the alternate technologies which may be applied to the development of oil shale. However, a basis for considering potential health protection problems associated with development of this industry will be established.

  19. Industrial applications of electron accelerators

    E-Print Network [OSTI]

    Cleland, M R

    2006-01-01T23:59:59.000Z

    This paper addresses the industrial applications of electron accelerators for modifying the physical, chemical or biological properties of materials and commercial products by treatment with ionizing radiation. Many beneficial effects can be obtained with these methods, which are known as radiation processing. The earliest practical applications occurred during the 1950s, and the business of radiation processing has been expanding since that time. The most prevalent applications are the modification of many different plastic and rubber products and the sterilization of single-use medical devices. Emerging applications are the pasteurization and preservation of foods and the treatment of toxic industrial wastes. Industrial accelerators can now provide electron energies greater than 10 MeV and average beam powers as high as 700 kW. The availability of high-energy, high-power electron beams is stimulating interest in the use of X-rays (bremsstrahlung) as an alternative to gamma rays from radioactive nuclides.

  20. SymposiumandIndustrialAffiliatesProgramLightinAction Industrial Affiliates Program

    E-Print Network [OSTI]

    Van Stryland, Eric

    Session I Abstract: Recently Additive Manufacturing (AM) has been hailed as the "third industrial Platform for precision additive manufacturing largely depends on the speed and accuracy of in-situ optical Dean & Director, CREOL, UCF Symposium: Light in Action Session I. Manufacturing 9:15 Advances