Powered by Deep Web Technologies
Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Electric Utility Industrial Conservation Programs  

E-Print Network [OSTI]

The Alliance to Save Energy conducted a study, funded by the John A. Hartford Foundation, of industrial and commercial electricity conservation opportunities in the service territory of Arkansas Power and Light Company (AP&L). The study determined...

Norland, D. L.

1983-01-01T23:59:59.000Z

2

PPL Electric Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

PPL Electric Utilities offers rebates and incentives for commercial and industrial products installed in their service area. The program offers rebates for lighting, heat pumps, refrigeration...

3

Anaheim Public Utilities- Commercial & Industrial New Construction Rebate Program  

Broader source: Energy.gov [DOE]

Anaheim Public Utilities (APU) offers commercial, industrial, and institutional customers the New Construction Incentives Program to offset construction and installation costs of energy efficient...

4

Providing Utilities with Tools for Industrial Marketing Programs  

E-Print Network [OSTI]

PROVIDING UTILITIES WITH TOOLS FOR INDUSTRIAL MARKETING PROGRAMS Laura E. Cahi 11 Center "for Metals Fabrication Columbus, Ohio Marketing electrotechnologies to industrial customers can be a complex task unless the right tools are available... to marketing representa tives. The Center for Metals Fabrication is using several tools to tailor marketing programs for 18 electric utilities. CMF provides: o A hotline that customer and utility representatives can use to get advice on implenenting...

Cahill, L. E.

5

Using DOE Industrial Energy Audit Data for Utility Program Design  

E-Print Network [OSTI]

. Baltimore Gas & Electric Company BG&E provides natural gas and electric service to central Maryland, serving approximately 1,000,000 residential customers, 100,000 commercial customers, and 3,000 industrial customers. The industrial customers in BG... time-of-use rates, credits for reducing demand during critical periods, and rebates for efficient lighting, motors, and air compressors. In 1992, BG&E also began the design of its Custom Industrial Plant Upgrade Program, intended to provide custom...

Glaser, C. J.; Packard, C. P.; Parfomak, P.

6

Moorhead Public Service Utility- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

[http://www.mpsutility.com Moorhead Public Service Utility] offers the Bright Energy Solutions Programs for commercial and industrial customers that purchase and install qualifying energy-efficient...

7

Coldwater Board of Public Utilities- Commercial and Industrial Lighting Rebate Program  

Broader source: Energy.gov [DOE]

The Coldwater Board of Public Utility, in conjunction with American Municipal Power's "Efficiency Smart" program, offers a wide range of incentives that encourage commercial and industrial to...

8

Shakopee Public Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Shakopee Public Utilities (SPU) offers a wide array of rebates and incentives encouraging its commercial customers to increase the energy efficiency of their facilities. Broadly, rebates exist for...

9

Waseca Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency (SMMPA) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit, municipally-owned member utilities...

10

Fort Collins Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Fort Collins provides businesses incentives for new construction projects and existing building retrofits. The Electric Efficiency Program encourages companies to retrofit facilities with new...

11

Industrial Customer Perspectives on Utility Energy Efficiency Programs |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartment ofTheDepartment of2012Pathways

12

Electric Utility Industry Update  

Broader source: Energy.gov [DOE]

Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

13

Austin Utilities (Gas and Electric)- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Austin Utilities offers incentives to its commercial and industrial customers for the installation of energy-efficient equipment in eligible facilities. Rebates are available for lighting equipment...

14

Utility and Industrial Partnerships  

E-Print Network [OSTI]

In the past decade, many external forces have shocked both utilities and their large industrial customers into seeking more effective ways of coping and surviving. One such way is to develop mutually beneficial partnerships optimizing the use...

Sashihara, T. F.

15

Innovative Utility Pricing for Industry  

E-Print Network [OSTI]

INNOVATIVE UTILITY PRICING FOR INDUSTRY James A. Ross Drazen-Brubaker &Associates, Inc. St. Louis, Missouri ABSTRACT The electric utility industry represents only one source of power available to industry. Al though the monopolistic... structure of the electric utility industry may convey a perception that an electric utility is unaffected by competition, this is an erroneous perception with regard to in dustry. Electric utilities face increased compe tition, both from other utilities...

Ross, J. A.

16

Lessons Learned: A review of utility experience with conservation and load management programs for commercial and industrial customers  

SciTech Connect (OSTI)

This report examines utility experience with conservation and load management (C LM) programs of commercial and industrial (C I) customers in order to summarize the lessons learned from program experiences to date and what these teach us about how to operate successful programs in the future. This analysis was motivated by a desire to learn about programs which achieve high participation rates and high electricity savings while remaining cost effective. Also, we wanted to review the very latest experiences with innovative program approaches -- approaches that might prove useful to utilities as they scale up their C LM activities. Specific objectives of this phase of the study are threefold: (1) To disseminate information on utility C LM experience to a nationwide audience. (2) To review current New York State utility programs and make suggestions on how these programs can be improved. (3) To collect data for the final phase of the American Council for an Energy-Efficient Economy/New York State Energy Research and Development Authority project, which will examine the savings that are achievable if C LM programs are pushed to the limit'' of current knowledge on how to structure and run cost-effective C LM programs. 19 tabs.

Nadel, S.

1990-10-01T23:59:59.000Z

17

Utility and state industrial EMS incentives programs: Experience and success factors  

SciTech Connect (OSTI)

This paper summarizes the results of a survey of utility and state demand-side management (DSM) programs that address efficient motor systems. The paper discusses the incentive structures in place at both the state and utility levels to encourage efficient motor systems, and the market barriers associated with implementation of efficient motor equipment. The paper also assesses how the current incentives might address the market barriers to the implementation of efficient motor systems.

Roop, J.M.; Stucky, D.J.

1993-03-01T23:59:59.000Z

18

Industrial Energy Efficiency: Designing Effective State Programs...  

Office of Environmental Management (EM)

State Programs for the Industrial Sector This report provides state regulators, utilities, and other program administrators an overview of the spectrum of U.S. industrial...

19

A Case Study of Danville Utilities: Utilizing Industrial Assessment...  

Broader source: Energy.gov (indexed) [DOE]

A Case Study of Danville Utilities: Utilizing Industrial Assessment Centers to Provide Energy Efficiency Resources for Key Accounts A Case Study of Danville Utilities: Utilizing...

20

Port Angeles Public Works and Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Port Angeles Public Works and Utilities provides incentives for business customers to increase the energy efficiency of eligible facilities. Rebates are offered for a variety of improvements...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

The Impacts of Utility-Sponsored Demand-Side Management Programs on Industrial Electricity Consumers  

E-Print Network [OSTI]

in this paper of the arguments and recommendations of DSM-advocates are general, particular attention is paid to the potentially damaging effects of these proposals on large commercial and industrial customers....

Rosenblum, J. I.

22

Operation of a Joint Utility/Industry Ambient Air Monitoring Program in the Houston Area  

E-Print Network [OSTI]

of Significant Deterioration (PSD) permit and ESL-IE-91-06-28 Proceedings from the 13th National Industrial Energy Technology Conference, Houston, TX, June 12-13, 1991 Texas Air Control Board (TACB) construction and operating permit requirements. The objectives... member companies with representative criteria pollutant and meteorological data for industry located within a 900 square mile area encompassing east Harris and west Chambers Counties. Data from this network has been approved by the ACB and EPA Region VI...

Kush, J. A.

23

Blooming Prairie Public Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency (SMMPA) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit, municipally-owned member utilities...

24

Lodi Electric Utility- PV Rebate Program  

Broader source: Energy.gov [DOE]

Lodi Electric Utility offers rebates to its residential, commercial, industrial and municipal customers who install photovoltaic (PV) systems. The rebate program is funded with approximately $6...

25

Designing Industrial DSM Programs that Work  

E-Print Network [OSTI]

. Industrial DSM programs are generally among the least expensive types of DSM programs. A 1990 review (Nadel) of over 200 commercial and industrial DSM programs found that motor rebate and other industrial programs had the lowest cost to the utility... Electric Smart Money for Business Program. Wisconsin Electric's (WEPCO) C&I Smart Money for Business program is a combination custom and prescriptive program offering commercial and industrial customers zero to-low interest loans or cash rebates...

Nadel, S. M.; Jordan, J. A.

26

INDUSTRIAL ENGINEERING GRADUATE PROGRAMS  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor of Philosophy in Systems and Engineering Management programs prepare competent industrial engineers

Gelfond, Michael

27

Designing Effective State Programs for the Industrial Sector...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Effective State Programs for the Industrial Sector provides state regulators, utilities, and other program administrators with an overview of U.S. industrial energy...

28

Anoka Municipal Utility- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Anoka Municipal Utility (AMU) offers the Commercial and Industrial Lighting and Motor Rebate Program for commercial and industrial customers who install high efficiency lighting, motors, and...

29

Utility Conservation Programs: Opportunities and Strategies  

E-Print Network [OSTI]

UTILITY CONSERVATION PROGRAMS: OPPORTUNITIES AND STRATEGIES*+ Douglas L. Norland James L. Wolf Alliance to Save Energy Washington, D.C. ABSTRACT This paper examines the use of conservation programs to achiev~ utility goals in an electric... industry environment subject to change. First, the importance of articulating clear goals for the mission of a utility is discussed. Second, a strategic framework for analysis of utility promo tion of conservation investment is presented. Third...

Norland, D. L.; Wolf, J. L.

30

Utility Partnerships Program Overview (Brochure)  

SciTech Connect (OSTI)

Program overview brochure for the Utility Partnerships Program within the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP).

Not Available

2011-07-01T23:59:59.000Z

31

What Does Industry Expect From An Electrical Utility  

E-Print Network [OSTI]

The electric utility industry is an important supplier to Union Carbide and as such must become a proactive participant in our quality programs which are aimed at continuous improvement in everything we do. The essential ingredients in the supplier...

Jensen, C. V.

32

Industrial Load Shaping: A Utility Strategy to Deal with Competition  

E-Print Network [OSTI]

INDUSTRIAL LOAD SHAPING: A UTILITY STRATEGY TO DEAL WITH COMPETITION DONALD BULES BULES AND ASSOCIATES SAN FRANCISCO, ABSTRACT In recent years competition from various sources such as cogeneration and bypass has led many utilities... to refocus attention on their large industrial customers. Industrial load shaping is a customized program involving cost-effective process modifications and operational changes which result in a restructuring of the electric load profile of individual...

Bules, D.

33

Promoting Energy Efficiency in Industry: Utility Roles and Perspectives  

E-Print Network [OSTI]

successful utility marketing puget Sound Power and Light programs related to commercial/industrial end (Puget Power) -- The most flex use efficiency are: ible rebate program offered. Commercial/industrial customers ? Customer Education may submit... proposals and engineering designs for a rebate Pacific Gas and Electric Company up to $100,000. Utility (PG&E) -- Technical briefs of engineers also help with drawing new, emerging technologies. up bid specifications. Energy consumption monitoring...

Limaye, D. R.; Davis, T. D.

1984-01-01T23:59:59.000Z

34

The Utility Battery Storage Systems Program Overview  

SciTech Connect (OSTI)

Utility battery energy storage allows a utility or customer to store electrical energy for dispatch at a time when its use is more economical, strategic, or efficient. The UBS program sponsors systems analyses, technology development of subsystems and systems integration, laboratory and field evaluation, and industry outreach. Achievements and planned activities in each area are discussed.

Not Available

1994-11-01T23:59:59.000Z

35

Industry/Utility Partnerships: Formula for Success  

E-Print Network [OSTI]

INDUSTRY/UTILITY PARTNERSHIPS: FORMULA FOR SUCCESS William R. Smith, PE, Business Development, Houston Lighting & Power Company, Houston, TX 77046 H. D. Spriggs, PhD, President, Matrix 2000, Leesburg, VA 22075 ABSTRACT Industry/utility... a critical role in their competitiveness. Utilities can playa central role in industrial competitiveness, not only by providing competitively priced and reliable power, but also by helping their customers to identify and implement the most...

Smith, W. R.; Spriggs, H. D.

36

Industrial Low Temperature Waste Heat Utilization  

E-Print Network [OSTI]

In this paper, some common and emerging techniques to better utilize energy in the chemical process industries are discussed. Temperature levels of waste heat available are pointed out. Emerging practices for further economical utilization of waste...

Altin, M.

1981-01-01T23:59:59.000Z

37

Public Utilities Commission Consumer Programs  

E-Print Network [OSTI]

California Public Utilities Commission Consumer Programs Water Programs The CPUC regulates company's service territory and have varying income limits. Check with your water utility to find out plans that can help you man- age your bills. Contact the utility directly, using the customer service

38

Anaheim Public Utilities- Green Building and New Construction Rebate Program  

Broader source: Energy.gov [DOE]

Anaheim Public Utilities (APU) offers commercial, industrial, residential, and institutional customers the Green Building Incentives Program to offset construction, installation and upgrade costs...

39

Integrated Industrial Wood Chip Utilization  

E-Print Network [OSTI]

The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

Owens, E. T.

1984-01-01T23:59:59.000Z

40

Deregulating the electric utility industry  

E-Print Network [OSTI]

Many functions must be performed in any large electric power system. A specific proposal for a deregulated power system, based on a real-time spot energy marketplace, is presented and analyzed. A central T&D utility acts ...

Bohn, Roger E.

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

AVLIS industrial access program  

SciTech Connect (OSTI)

This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the project in a competitive procurement situation. As a result, costs and procurement risks are both reduced because the products provided come from within the AVLIS suppliers' experience base. At the same time, suppliers can benefit by the potential to participate in AVLIS technology spin-off markets. 35 figures.

Not Available

1984-11-15T23:59:59.000Z

42

Industrial Utilization of Coal-Oil Mixtures  

E-Print Network [OSTI]

Coal-oil mixtures (COM) are receiving increasing interest as economical alternatives to residual fuel oil and natural gas used in heavy industrial and utility applications. Four basic approaches are currently employed in the manufacture of COM...

Dunn, J. E.; Hawkins, G. T.

1982-01-01T23:59:59.000Z

43

Federal Utility Partnership Working Group Industry Commitment...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

utility industry members of the Edison Electric Institute pledge to assist Federal agencies in achieving energy-saving goals. These goals are set in the Energy Policy Act of...

44

The Utility Relationship to its Key Industries  

E-Print Network [OSTI]

While the price of energy may have stabilized for the moment, the impact of several years of rate increases in the cost of energy, materials, and labor have made American industry re-evaluate their operations. Utilities serving clusters...

Gilbert, J. S.

45

Federal Utility Partnership Working Group Industry Commitment  

Broader source: Energy.gov [DOE]

Investor-owned electric utility industry members of the Edison Electric Institute pledge to assist Federal agencies in achieving energy-saving goals. These goals are set in the Energy Policy Act of...

46

Utility Roles in Preserving the Industrial Base  

E-Print Network [OSTI]

While the price of energy may have stabilized for the moment, the impact of several years of rate increases in the cost of energy, materials, and labor has made American industry re-evaluate its operations. Utilities serving clusters of industrial...

Gilbert, J. S.

47

Electric Utility Measurement & Verification Program  

E-Print Network [OSTI]

Electric Utility Measurement & Verification Program Ken Lau, P.Eng., CMVP Graham Henderson, P.Eng., CMVP Dan Hebert, P.Eng.,CMVP Mgr, Measurement & Verification Engineering Team Leader Senior Engineer BC Hydro Burnaby, BC Canada...

Lau, K.; Henderson, G.; Hebert, D.

48

Colorado Industrial Challenge and Recognition Program | Department...  

Broader source: Energy.gov (indexed) [DOE]

Colorado Industrial Challenge and Recognition Program Colorado Industrial Challenge and Recognition Program This fact sheet offers details of the Colorado Industrial program state...

49

SymposiumandIndustrialAffiliatesProgramLightinAction Industrial Affiliates Program  

E-Print Network [OSTI]

SymposiumandIndustrialAffiliatesProgramLightinAction #12;Industrial Affiliates Program Friday, 8 Session I Abstract: Recently Additive Manufacturing (AM) has been hailed as the "third industrial revolution" by Economist magazine [April -2012]. Precision of the product manufactured by AM largely depends

Van Stryland, Eric

50

Utility Partnerships Program Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyTheTwo New12.'6/0.2Contract (UESC) is not anPartnerships Program

51

EPRI's Industrial Energy Management Program  

E-Print Network [OSTI]

the Electric Power Research Institute has been establishing industry specific Centers and Offices nationwide to assist electric utilities and their customers in managing for a better use of energy. Hundreds of joint industry/utility projects... services thus supporting national objectives for a clean environment and a strong economic future. The Electric Power Research Institute (EPRI) recognizes that the management of energy use and the environmental impacts of industrial activity...

Mergens, E.; Niday, L.

52

Garnering the Industrial Sector: A Comparison of Cutting Edge Industrial DSM Programs  

E-Print Network [OSTI]

The industrial sector has posed a daunting DSM challenge to utilities throughout North America, even to those with successful and creative residential and commercial DSM programs. Most utilities have had great difficulty in going beyond conventional...

Kyricopoulos, P. F.; Wikler, G. A.; Faruqui, A.; Wood, B. G.

53

Hercules Municipal Utility- PV Rebate Program  

Broader source: Energy.gov [DOE]

'''''Note: This program has been temporarily suspended. Contact the utility for more information.'''''

54

The Industrial Electrification Program  

E-Print Network [OSTI]

EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

Harry, I. L.

1982-01-01T23:59:59.000Z

55

Utility battery storage systems program report for FY 94  

SciTech Connect (OSTI)

Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Energy Management. The goal of this program is to assist industry in developing cost-effective battery systems as a utility resource option by 2000. Sandia is responsible for the engineering analyses, contracted development, and testing of rechargeable batteries and systems for utility energy storage applications. This report details the technical achievements realized during fiscal year 1994.

Butler, P.C.

1995-03-01T23:59:59.000Z

56

How One Utility is Building Industrial Consumer Relationships  

E-Print Network [OSTI]

HOW ONE UT1~ITY IS BUILDING INDUSTRIAL CONSUMER RELATIONSHIPS DONALD E. HAMILTON Manager-Industrial Services and Cogeneration Gulf States Utilities Company Beaumont, Texas COMPETITION AND THE UTILITY INDUSTRY The refining and petrochemical... industries enjoyed an unprecedented era of growth beginning with World War II and continuing through the seventies. Electric loads served by gulf coast utilities grew at phenomenal rates. Electric loads at Gulf States Utilities, my Company, grew at a...

Hamilton, D. E.

57

Better Buildings Neighborhood Program Working with Utilities...  

Broader source: Energy.gov (indexed) [DOE]

August 2, 2012 Better Buildings Neighborhood Program Working with Utilities Peer Exchange Call: Effective Strategies for Participating in Utility Planning Call Slides and...

58

Trends in Utility Green Pricing Programs (2005)  

SciTech Connect (OSTI)

This report presents year-end 2005 data on utility green pricing programs, and examines trends in consumer response and program implementation over time. The data in this report, which were obtained via a questionnaire distributed to utility green pricing program managers, can be used by utilities to benchmark the success of their green power programs.

Bird, L.; Brown, E.

2006-10-01T23:59:59.000Z

59

Utility vehicle safety Operator training program  

E-Print Network [OSTI]

Utility vehicle safety Operator training program #12;Permissible use Utility Vehicles may only Utility Vehicle operator · When equipped with the "Required Equipment" · On public roadways within Drivers" · Obey all traffic regulations · Trained; update training every two years · Operate vehicles

Minnesota, University of

60

Federal Utility Program Overview (Fact Sheet)  

SciTech Connect (OSTI)

Fact sheet overview of the U.S. Department of Energy (DOE) Federal Energy Management Program's (FEMP) Federal Utility Program, including common contracts and services available to Federal agencies through local serving utilities.

Not Available

2009-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Utility battery storage systems. Program report for FY95  

SciTech Connect (OSTI)

Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the U.S. Department of Energy`s Office of Utility Technologies. The goal of this program is to assist industry in developing cost-effective battery systems as a utility resource option by 2000. Sandia is responsible for the engineering analyses, contracted development, and testing of rechargeable batteries and systems for utility energy storage applications. This report details the technical achievements realized during fiscal year 1995.

Butler, P.C.

1996-03-01T23:59:59.000Z

62

Industrial-Load-Shaping: The Practice of and Prospects for Utility/Industry Cooperation to Manage Peak Electricity Demand  

E-Print Network [OSTI]

INDUSTRIAL-LOAD-SHAPI1IG: TIlE PRACTICE OF AND PROSPECTS FOR UTILITY/INDUSTRY COOPERATION TO MAUGE PEAK ELECTRICITY DEMAND Donald J. BuIes and David E. Rubin Consultants, Pacific Gas and Electric Company San Francisco, California Michael F.... Maniates Energy and Resources Group, University of California Berkeley, California ABSTRACT Load-management programs designed to reduce demand for electricity during peak periods are becoming increasingly important to electric utilities. For a gf...

Bules, D. J.; Rubin, D. E.; Maniates, M. F.

63

New Advanced System Utilizes Industrial Waste Heat to Power Water...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Water Reuse ADVANCED MANUFACTURING OFFICE New Advanced System Utilizes Industrial Waste Heat to Power Water Purification Introduction As population growth and associated factors...

64

Accrediting industrial safety training programs  

SciTech Connect (OSTI)

There are job-specific training requirements established by regulations that Impose stringent training requirements on a contractor, for example, the Occupational Safety & Health Act (OSHA). Failure to comply with OSHA training requirements can result in severe penalties being levied against a company. Although an accredited training program is expensive, it is a possible solution for minimizing risks associated with job-specific training requirements for employees. Operating DOE contractors direct approximately 10 percent of the operating funds toward training activities. Training needs for contractors span a broad range, from requirements awareness training for managers, to general training required on a one-time basis for all employees, to highly specialized training programs for employees involved In clean-up operations at hazardous waste sites. With this kind of an investment in training, it is logical to maximize the most return on an investment of training funds and to limit exposure to liability suits whenever possible. This presentation will provide an overview of accredited industrial safety programs. The criteria for accredited industrial safety programs will be defined. The question of whether accredited training programs are necessary will be examined. Finally, advantages and disadvantages will be identified for accrediting industrial safety training programs.

Beitel, L.

1992-12-31T23:59:59.000Z

65

Trends in Utility Green Pricing Programs (2005)  

Broader source: Energy.gov [DOE]

This report presents year-end 2005 data on utility green pricing programs, and examines trends in consumer response and program implementation over time. The data in this report, which were obtained via a questionnaire distributed to utility green pricing program managers, can be used by utilities to benchmark the success of their green power programs. It is important to note that this report covers only a portion of voluntary markets for renewable energy. It does not cover green power sold by independent marketers except for cases in which the marketers work in conjunction with utilities or default electricity suppliers.

66

Colorado Springs Utilities- Energy Efficient Builder Program  

Broader source: Energy.gov [DOE]

The Colorado Springs Utilities (CSU) Energy Efficient Builder Program offers an incentive to builders who construct ENERGY STAR® qualified homes within the CSU service area. The incentive range...

67

Sharyland Utilities- Commercial Standard Offer Program (Texas)  

Broader source: Energy.gov [DOE]

Sharyland Utilities offers the Residential and "Hard-to-Reach" Standard Offer Programs, which encourage residential customers to pursue energy saving measures and equipment upgrades in their homes....

68

Oklahoma Industrial Energy Management Program  

E-Print Network [OSTI]

In Oklahoma, industry consumes about 35% of the total energy consumed. While it is true that much work has been done in the larger companies, most small to medium sized companies have yet to undertake a substantial energy management program. Often...

Turner, W. C.; Estes, C. B.

1982-01-01T23:59:59.000Z

69

Environment Canada Industrial Programs Section  

E-Print Network [OSTI]

#12;Environment Canada Industrial Programs Section Environmental Protection Guide for Best Management Practices for Process Water Management at Fish Processing Plants in British Columbia h~ NovaTec Consultants Inc. Environmental Engineers and Scientists September 1994 Project No: 1043.16 #12;DISCLAIMER

70

Renewable Energy Price-Stability Benefits in Utility Green Power Programs  

SciTech Connect (OSTI)

This paper examines utility experiences when offering the fixed-price benefits of renewable energy in green pricing programs, including the methods utilized and the impact on program participation. It focuses primarily on utility green pricing programs in states that have not undergone electric industry restructuring.

Bird, L. A.; Cory, K. S.; Swezey, B. G.

2008-08-01T23:59:59.000Z

71

UW Computer Science & Engineering Industry Affiliates Program  

E-Print Network [OSTI]

UW Computer Science & Engineering Industry Affiliates Program 2013-14 Contributions for the CSE Industry Affiliates Program are to be used to further the Computer Science & Engineering program-Benton Industrial Affiliates Program University of Washington Computer Science & Engineering Box 352350 Seattle, WA

Borenstein, Elhanan

72

UW Computer Science & Engineering Industrial Affiliates Program  

E-Print Network [OSTI]

UW Computer Science & Engineering Industrial Affiliates Program 2011-12 Contributions for the CSE Industrial Affiliates Program are to be used to further the Computer Science & Engineering program with this completed form to: Kay Beck-Benton Industrial Affiliates Program University of Washington Computer Science

Anderson, Richard

73

Austin Utilities- Solar Rebate Program  

Broader source: Energy.gov [DOE]

Austin Utilities provides incentives for their residential and commercial customers to install photovoltaic (PV) and solar water heating systems. Qualifying PV systems can earn $1 per watt;...

74

ENERGY STAR Portfolio Manager and Utility Benchmarking Programs...  

Office of Environmental Management (EM)

ENERGY STAR Portfolio Manager and Utility Benchmarking Programs: Effectiveness as a Conduit to Utility Energy Efficiency Programs ENERGY STAR Portfolio Manager and Utility...

75

Canada's Voluntary Industrial Energy Conservation Program  

E-Print Network [OSTI]

Industrial Energy Conservation in Canada is organized and promoted through a voluntary program that is administered by industry. Industry is divided into fifteen sectors, each of which is represented by a Voluntary Task Force. Information exchange...

Wolf, C. A., Jr.

1980-01-01T23:59:59.000Z

76

Energy Efficient Industrialized Housing Research Program  

SciTech Connect (OSTI)

Six area reported progress in the Energy Efficient Industrialized Housing Research Program during FY 1991. As part of Industry Guidance, meetings were held with steering and technical committees in computers, housing design and manufacturing. This task area enables the program to benefit from the expertise of industry representatives and communicate research results directly to them. As part of the Design Process performance specifications were being developed for the future housing system designed last year. These house designs coordinate and optimize predicted and desirable advances in computerized design processes, materials, components, and manufacturing automation to achieve energy efficiency at reduced first cost. Energy design software were being developed for CAD systems, stressed skin insulating core panel manufacturers; and a prototype energy sales tool. A prototype design was to be developed to integrate one or more subsystems with the building skin. As part of the Manufacturing Process we are developing a manufacturing process simulation and data base to help current and new entrants to the industrialized housing industry in assessing the impact of implementing new manufacturing techniques. For Evaluation we are developing testing plans for six units of housing on the UO campus and the stressed skin insulating core house to be constructed in Oregon. The DOW Chemical test structure will be retrofitted with a tile roof and retested to compare to the dome and conventional construction structures. Calibration of the wind tunnel will be completed so that laboratory tests can be conducted to simulate the ventilation cooling efficiency of houses in design. Research utilization and program management were either aspects of this program.

Not Available

1992-03-01T23:59:59.000Z

77

Energy Programs of the Texas Industrial Commission  

E-Print Network [OSTI]

The objectives of the Industrial Energy Conservation Program are to assist Texas industry in using energy more efficiently through seminars, workshops, technical information exchange and other supportive programs with the goal of conserving at least...

Heare, J.; dePlante, L. E.

1979-01-01T23:59:59.000Z

78

Unitil- Commercial and Industrial Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

Unitil offers three different programs for its commercial, industrial, and institutional customers in New Hampshire: the Small Business Energy Efficiency Services Program, the Large Business...

79

Industrial Boiler Optimization Utilizing CO Control  

E-Print Network [OSTI]

complex is the focus of many corporate and plant managers. This paper discusses the approach of a large chemical company that is effectively utilizing a direct digital control (DOC) system coupled with the measurement of carbon monoxide to optimize...

Ruoff, C. W.; Reiter, R. E.

1980-01-01T23:59:59.000Z

80

Trends in Utility Green Pricing Programs (2004)  

SciTech Connect (OSTI)

In the early 1990s, only a handful of utilities offered their customers a choice of purchasing electricity generated from renewable energy sources. Today, nearly 600 utilities in regulated electricity markets--or almost 20% of all utilities nationally--provide their customers a "green power" option. Because some utilities offer programs in conjunction with cooperative associations or other publicly owned power entities, the number of distinct programs totals about 125. Through these programs, more than 40 million customers spanning 34 states have the ability to purchase renewable energy to meet some portion or all of their electricity needs--or make contributions to support the development of renewable energy resources. Typically, customers pay a premium above standard electricity rates for this service. This report presents year-end 2004 data on utility green pricing programs, and examines trends in consumer response and program implementation over time. The data in this report, which were obtained via a questionnaire distributed to utility green pricing program managers, can be used by utilities as benchmarks by which to gauge the success of their green power programs.

Bird, L.; Brown, E.

2005-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Demand Response Programs Oregon Public Utility Commission  

E-Print Network [OSTI]

, Demand Side Management #12;Current Programs/Tariffs ­ Load Control Programs Cool Keeper, Utah (currentlyDemand Response Programs Oregon Public Utility Commission January 6, 2005 Mike Koszalka Director 33 MW, building to 90 MW) Irrigation load control, Idaho (35 MW summer, 2004) Lighting load control

82

Cogeneration: The Need for Utility-Industry Cooperation  

E-Print Network [OSTI]

Cogeneration is receiving increasing attention because of its potential for efficient utilization of energy. Many recent cogeneration studies, however, have concentrated on the benefits and costs of cogeneration to industry, giving little...

Limaye, D. R.

1982-01-01T23:59:59.000Z

83

Marshfield Utilities- Heat Pump Rebate Program  

Broader source: Energy.gov [DOE]

Marshfield Utilities offers cash-back rewards for Ground Source Heat Pumps, as well as Focus on Energy program incentives. A rebate of $550 will be given to customers who purchase and install...

84

Cedar Falls Utilities- Residential New Construction Program  

Broader source: Energy.gov [DOE]

Cedar Falls Utilities offers incentives to residential customers who construct new energy efficient homes. A rate discount of 25% is available to customers who meet the 5 Star Home Program criteria...

85

Colorado Springs Utilities- Renewable Energy Rebate Program  

Broader source: Energy.gov [DOE]

Through its Renewable Energy Rebate Program, Colorado Springs Utilities (CSU) offers a rebate to customers who install grid-connected solar-electric (PV) systems, wind systems, and solar water...

86

Clark Public Utilities- Residential Weatherization Loan Program  

Broader source: Energy.gov [DOE]

Loans of up to $15,000 at a 5.25% interest are available through Clark Public Utilities' Weatherization Loan Program. The loans can pay for the average local cost of eligible measures, based on...

87

Avista Utilities (Gas)- Prescriptive Commercial Incentive Program  

Broader source: Energy.gov [DOE]

Avista Utilities offers Natural Gas saving incentives to commercial customers on rate schedule 420 and 424. This program provides rebates for a variety of equipment and appliances including cooking...

88

Natural Gas Utility Conservation Programs (Maine)  

Broader source: Energy.gov [DOE]

This Chapter describes how natural gas utilities serving more than 5,000 residential customers must implement natural gas energy conservation programs. The regulations describe criteria and terms...

89

Bryan Texas Utilities- SmartHOME Program  

Broader source: Energy.gov [DOE]

The Bryan Texas Utilities (BTU) SmartHOME Programs offers incentives to owners of single- and multi-family homes for insulation, windows, and solar screens. The incentive rate is set at $900/kW...

90

Ontario's Industrial Energy Services Program  

E-Print Network [OSTI]

% of the engineering costs up to a maximum depending on the size of the annual energy bill. Once the work has been completed and the consultant's invoice paid, a copy of the invoice and a co~y of the report is sent to the Ministry. After internal review, a cheque... represent approximately $600 million annually. Recently, the Ontario Ministry of Energy released a policy paper outlining the government's commitment to energy conservation and efficiency. One of the key areas was Industry, and the Ministry's programs...

Ploeger, L. K.

91

Standardized equipment labeling program for electrical utilities  

SciTech Connect (OSTI)

The purpose of this supporting document is to provide specific guidelines required for Electrical Utilities to implement and maintain a standard equipment and piping labeling program in accordance with WHC-SP-0708, Chapter 18, {open_quotes}Westinghouse Hanford Company Conduct of Operations Manual{close_quotes}. Specific guidelines include definition of program responsibilities.

Not Available

1994-07-19T23:59:59.000Z

92

Perspectives on the future of the electric utility industry  

SciTech Connect (OSTI)

This report offers perspectives on the future of the electric utility industry. These perspectives will be used in further research to assess the prospects for Integrated Resource Planning (IRP). The perspectives are developed first by examining economic, political and regulatory, societal, technological, and environmental trends that are (1) national and global in scope and (2) directly related to the electric utility industry. Major national and global trends include increasing global economic competition, increasing political and ethnic strife, rapidly changing technologies, and increasing worldwide concern about the environment. Major trends in the utility industry include increasing competition in generation; changing patterns of electricity demand; increasing use of information technology to control power systems; and increasing implementation of environmental controls. Ways in which the national and global trends may directly affect the utility industry are also explored. The trends are used to construct three global and national scenarios- ``business as usual,`` ``technotopia future,`` and ``fortress state`` -and three electric utility scenarios- ``frozen in headlights,`` ``megaelectric,`` and ``discomania.`` The scenarios are designed to be thought provoking descriptions of potential futures, not predictions of the future, although three key variables are identified that will have significant impacts on which future evolves-global climate change, utility technologies, and competition. While emphasis needs to be placed on understanding the electric utility scenarios, the interactions between the two sets of scenarios is also of interest.

Tonn, B. [Oak Ridge National Lab., TN (United States); Schaffhauser, A. [Tennessee Univ., Knoxville, TN (United States)

1994-04-01T23:59:59.000Z

93

Fort Pierce Utilities Authority- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

'''Fort Pierce Utilities Authority has suspended rebate offerings until 2013. Contact the utility for more information on this program. '''

94

Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs  

E-Print Network [OSTI]

Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs Supervisory Committee Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management of Environmental Studies) Departmental Member For energy utilities faced with expanded jurisdictional energy

Victoria, University of

95

Industrial DSM Programs: Low-Cost Resource and Smart Customer Service  

E-Print Network [OSTI]

customers through demand-side management programs. The economic consequences of the utility's involvement has been far-reaching in each of the cases presented, and these examples illustrate the close interdependence between utilities and all industries...

Jaussaud, D.

96

Electric Utility Transmission and Distribution Line Engineering Program  

SciTech Connect (OSTI)

Economic development in the United States depends on a reliable and affordable power supply. The nation will need well educated engineers to design a modern, safe, secure, and reliable power grid for our future needs. An anticipated shortage of qualified engineers has caused considerable concern in many professional circles, and various steps are being taken nationwide to alleviate the potential shortage and ensure the North American power system's reliability, and our world-wide economic competitiveness. To help provide a well-educated and trained workforce which can sustain and modernize the nation's power grid, Gonzaga University's School of Engineering and Applied Science has established a five-course (15-credit hour) Certificate Program in Transmission and Distribution (T&D) Engineering. The program has been specifically designed to provide working utility engineering professionals with on-line access to advanced engineering courses which cover modern design practice with an industry-focused theoretical foundation. A total of twelve courses have been developed to-date and students may select any five in their area of interest for the T&D Certificate. As each course is developed and taught by a team of experienced engineers (from public and private utilities, consultants, and industry suppliers), students are provided a unique opportunity to interact directly with different industry experts over the eight weeks of each course. Course material incorporates advanced aspects of civil, electrical, and mechanical engineering disciplines that apply to power system design and are appropriate for graduate engineers. As such, target students for the certificate program include: (1) recent graduates with a Bachelor of Science Degree in an engineering field (civil, mechanical, electrical, etc.); (2) senior engineers moving from other fields to the utility industry (i.e. paper industry to utility engineering or project management positions); and (3) regular working professionals wishing to update their skills or increase their knowledge of utility engineering design practices and procedures. By providing graduate educational opportunities for the above groups, the T&D Program will help serve a strong industry need for training the next generation of engineers in the cost-effective design, construction, operation, and maintenance of modern electrical transmission and distribution systems. In addition to developing the on-line engineering courses described above, the T&D Program also focused significant efforts towards enhancing the training opportunities available to power system operators in the northwest. These efforts have included working with outside vendors to provide NERC-approved training courses in Gonzaga University's (GU) system operator training facility, support for an accurate system model which can be used in regional blackstart exercises, and the identification of a retired system operator who could provide actual regional training courses. The GU system operator training facility is also being used to recruit young workers, veterans, and various under-represented groups to the utility industry. Over the past three years students from Columbia Gorge Community College, Spokane Falls Community College, Walla Walla Community College, Central Washington University, Eastern Washington University, Gonzaga University, and various local high schools have attended short (one-day) system operator training courses free of charge. These collaboration efforts has been extremely well received by both students and industry, and meet T&D Program objectives of strengthening the power industry workforce while bridging the knowledge base across power worker categories, and recruiting new workers to replace a predominantly retirement age workforce. In the past three years the T&D Program has provided over 170 utility engineers with access to advanced engineering courses, been involved in training more than 300 power system operators, and provided well over 500 college and high school students with an experienc

Peter McKenny

2010-08-31T23:59:59.000Z

97

Commercial and Industrial Solar Rebate Program  

Broader source: Energy.gov [DOE]

The New Hampshire Public Utilities Commission initiated a new solar rebate program for non-residential applicants in November 2010. Funded by alternative compliance payments under the state's...

98

GUIDO BARTELS General Manager Global Energy & Utilities Industry, IBM  

E-Print Network [OSTI]

Energy Inc., a U.S. based publicly-traded, green energy technology company. Bartels is a frequent speakerGUIDO BARTELS General Manager Global Energy & Utilities Industry, IBM Chairman, Global Smart Grid Federation Board Member and Former Chairman, GridWise Alliance Guido Bartels heads up IBM's energy

99

Lodi Electric Utility- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Lodi Electric Utility (LEU) offers several residential energy efficiency programs, including the Appliance Rebate Program and the Home Improvement Rebate Program. Through the Energy Efficient Home...

100

Saving Energy in Industrial Compressed Air Systems: Issues and Obstacles in DSM Program Design  

E-Print Network [OSTI]

in capturing this potential through utility-sponsored DSM programs. Baltimore Gas & Electric Company (BG&E) has been investigating compressed air program design since 1991, and has offered rebate programs since January 1992. This paper will review BG... of performance, and incentive mechanisms. BACKGROUND Utility DSM for industrial customers has generally been developed as an offshoot of commercial programs targeting a few common end uses - lighting, HVAC, and motors. As DSM matures, however, utilities...

Trojanowski, D.; Parfomak, P.

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Oklahoma Industrial Energy Management Program  

E-Print Network [OSTI]

The need for sound energy management is no longer worthy of debate. Action is necessary and much is being done by U.S. industry. Unfortunately, however, the majority of the work is being done by the few large energy intensive industries throughout...

Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

1979-01-01T23:59:59.000Z

102

Electric & Gas Conservation Programs Connecticut Energy Efficiency Fund Programs for Commercial & Industrial Customers  

E-Print Network [OSTI]

1 Electric & Gas Conservation Programs Connecticut Energy Efficiency Fund Programs for Commercial & Industrial Customers Presented by: CL&P?s Conservation and Load Management Department 2 ? Connecticut Energy Efficiency... watts/sq.ft. calculations relative to ASHRAE 90.1-2004 baselines 7 Energy Conscious Blueprint Program ? Provides prescriptive rebates for: ? CT Cool Choice for HVAC Equipment ($ per ton) ? Utility prescriptive caps apply to the following: ? VFDs...

Sermakekian, E.

2011-01-01T23:59:59.000Z

103

Industrial and Agricultural Production Efficiency Program  

Broader source: Energy.gov [DOE]

Energy Trust of Oregon offers the Industrial and Agricultural Production Efficiency Program to customers of Portland General Electric, Pacific Power, NW Natural and Cascade Natural Gas. In order to...

104

Energy Technical Assistance: Industrial Processes Program  

E-Print Network [OSTI]

The Energy Technical Assistance Division of Texas Engineering Extension Service (TEEX) has implemented an energy conservation program to assist small industry in using energy more efficiently. This full time service, an outgrowth of the Texas A...

McClure, J. D.

1980-01-01T23:59:59.000Z

105

Industrial Energy Efficiency Programs: Development and Trends  

E-Print Network [OSTI]

As more states establish Energy Efficiency Resource Standards (EERS), goals for energy efficiency savings are increasing across the country. Increasingly, states are relying on their industrial energy efficiency programs to find and help implement...

Chittum, A.; Kaufman, N.; Elliot, N.

2010-01-01T23:59:59.000Z

106

Training For Industry Program (TIP) (Oklahoma)  

Broader source: Energy.gov [DOE]

The Oklahoma Department of Career and Technology Education runs the Training For Industry Program (TIP) is a no-cost/low-cost way for new or growing companies that create jobs to get a skilled,...

107

MSU Industrial Affiliates Program Guidelines MSU Departments or organizations that are developing industrial affiliates programs  

E-Print Network [OSTI]

Engineering is attached. A Best Practices Manual on developing industrial collaboration programs can be found at: http://erc-assoc.org/best_practices/best-practices-manual The Technology Transfer Office industrial affiliates programs should use a structure that is best suited for the program and the affiliates

Lawrence, Rick L.

108

Industrial recovered-materials-utilization targets for the metals and metal-products industry  

SciTech Connect (OSTI)

The National Energy Conservation Policy Act of 1978 directs DOE to set targets for increased utilization of energy-saving recovered materials for certain industries. These targets are to be established at levels representing the maximum feasible increase in utilization of recovered materials that can be achieved progressively by January 1, 1987 and is consistent with technical and economic factors. A benefit to be derived from the increased use of recoverable materials is in energy savings, as state in the Act. Therefore, emhasis on different industries in the metals sector has been related to their energy consumption. The ferrous industry (iron and steel, ferrour foundries and ferralloys), as defined here, accounts for approximately 3%, and all others for the remaining 3%. Energy consumed in the lead and zinc segments is less than 1% each. Emphasis is placed on the ferrous scrap users, followed by the aluminum and copper industries. A bibliography with 209 citations is included.

None

1980-03-01T23:59:59.000Z

109

Michigan utilities begin implementation of cogeneration programs  

SciTech Connect (OSTI)

Michigan's two major utilities, Consumers Power Corporation and Detroit Edison, are beginning to implement cogeneration and small power programs, although their approaches differ. Consumers Power is entering agreements to purchase cogenerated power at reasonable buyback rates to meet near-future capacity needs, while Detroit Edison is offering rate breaks to keep customers on the grid with an on-site cogeneration alternative rider because of excess capacity. Once its excess capacity is absorbed, Detroit Edison will encourage pursue the approach of Consumers Power. The latter recently filed to convert a Midland cancelled nuclear plant into a gas-fired cogeneration facility. The author reviews complications in this and other contracts and utility commission decisions. 2 tables.

Not Available

1987-02-01T23:59:59.000Z

110

Assessment of net lost revenue adjustment mechanisms for utility DSM programs  

SciTech Connect (OSTI)

Utility shareholders can lose money on demand-side management (DSM) investments between rate cases. Several industry analysts argue that the revenues lost from utility DSM programs are an important financial disincentive to utility DSM investment. A key utility regulatory reform undertaken since 1989 allows utilities to recover the lost revenues incurred through successful operation of DSM programs. Explicitly defined net lost revenue adjustment (NLRA) mechanisms are states` preferred approach to lost revenue recovery from DSM programs. This report examines the experiences states and utilities are having with the NLRA approach. The report has three objectives. First, we determine whether NLRA is a feasible and successful approach to removing the lost-revenue disincentive to utility operation of DSM programs. Second, we identify the conditions linked to successful implementation of NLRA mechanisms in different states and assess whether NLRA has changed utility investment behavior. Third, we suggest improvements to NLRA mechanisms. We first identify states with NLRA mechanisms where utilities are recovering lost revenues from DSM programs. We interview staff at regulatory agencies in all these states and utility staff in four states. These interviews focus on the status of NLRA, implementation issues, DSM measurement issues, and NLRA results. We also analyze regulatory agency orders on NLRA, as well as associated testimony, reports, and utility lost revenue recovery filings. Finally, we use qualitative and quantitative indicators to assess NLRA`s effectiveness. Contrary to the concerns raised by some industry analysts, our results indicate NLRA is a feasible approach to the lost-revenue disincentive.

Baxter, L.W.

1995-01-01T23:59:59.000Z

111

Transitioning to a Utility Funded Program Environment: What Do...  

Broader source: Energy.gov (indexed) [DOE]

Program Sustainability Peer Exchange Call: Transitioning to a Utility Funded Program Environment: What Do I Need To Know? call slides and discussion summary, January 17, 2013. Call...

112

Lodi Electric Utility- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Lodi Electric Utility (LEU) offers 3 commercial energy efficiency programs to eligible customers. Available incentives are based upon the customer rate schedule. Each program has separate incentive...

113

Sustainable Energy Utility- Residential Energy Efficiency Program (District of Columbia)  

Broader source: Energy.gov [DOE]

The District of Columbia Sustainable Energy Utility currently offers the Residential Energy Efficiency Program. The program provides financial incentives to District residents who install energy-...

114

Partnering With Utilities to Offer Energy Efficiency Programs Webinar Transcript  

Broader source: Energy.gov [DOE]

Partnering With Utilities to Offer Energy Efficiency Programs Webinar Transcript, from the U.S. Department of Energy Technical Assistance Program (TAP).

115

Cedarburg Light and Water Utility- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Cedarburg Light and Water Utility provides incentives for commercial, industrial and agricultural customers to increase the energy efficiency of eligible facilities. Upon request, Cedarburg Light...

116

New Ulm Public Utilities- Solar Electric Rebate Program  

Broader source: Energy.gov [DOE]

New Ulm Public Utilities provides solar photovoltaic (PV) rebates for residential, commercial, and industrial customers. Rebates are for $1 per nameplate watt, and customers must sign a net...

117

Avista Utilities (Electric)- Commercial Energy Efficiency Incentives Program  

Broader source: Energy.gov [DOE]

Avista Utilities offers numerous incentives to commercial and industrial customers to increase the energy efficiency of customer facilities or equipment. Incentive options are available for heating...

118

Clark Public Utilities- Commercial Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

Clark Public Utilities (CPU) offers a variety of energy efficiency rebates and services to help commercial and industrial customers save energy in existing and new facilities. Clark Public...

119

Elk River Municipal Utilities- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Elk River Municipal Utilities offers a variety of rebates to commercial, industrial, and agricultural customers for the installation of specific energy efficient equipment. Rebates are available...

120

New Ulm Public Utilities- Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

New Ulm Public Utilities offers incentives for its residential, commercial, and industrial customers to install energy-efficient equipment in eligible homes and facilities. Equipment eligible for...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Anaheim Public Utilities- Low-Interest Energy Efficiency Loan Program  

Broader source: Energy.gov [DOE]

Anaheim Public Utilities offers low-cost financing for energy efficiency measures through State Assistance Fund for Enterprise, Business and Industrial Development Corporation ([http://www.safe...

122

The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs  

SciTech Connect (OSTI)

End-use energy efficiency is increasingly being relied upon as a resource for meeting electricity and natural gas utility system needs within the United States. There is a direct connection between the maturation of energy efficiency as a resource and the need for consistent, high-quality data and reporting of efficiency program costs and impacts. To support this effort, LBNL initiated the Cost of Saved Energy Project (CSE Project) and created a Demand-Side Management (DSM) Program Impacts Database to provide a resource for policy makers, regulators, and the efficiency industry as a whole. This study is the first technical report of the LBNL CSE Project and provides an overview of the project scope, approach, and initial findings, including: • Providing a proof of concept that the program-level cost and savings data can be collected, organized, and analyzed in a systematic fashion; • Presenting initial program, sector, and portfolio level results for the program administrator CSE for a recent time period (2009-2011); and • Encouraging state and regional entities to establish common reporting definitions and formats that would make the collection and comparison of CSE data more reliable. The LBNL DSM Program Impacts Database includes the program results reported to state regulators by more than 100 program administrators in 31 states, primarily for the years 2009–2011. In total, we have compiled cost and energy savings data on more than 1,700 programs over one or more program-years for a total of more than 4,000 program-years’ worth of data, providing a rich dataset for analyses. We use the information to report costs-per-unit of electricity and natural gas savings for utility customer-funded, end-use energy efficiency programs. The program administrator CSE values are presented at national, state, and regional levels by market sector (e.g., commercial, industrial, residential) and by program type (e.g., residential whole home programs, commercial new construction, commercial/industrial custom rebate programs). In this report, the focus is on gross energy savings and the costs borne by the program administrator—including administration, payments to implementation contractors, marketing, incentives to program participants (end users) and both midstream and upstream trade allies, and evaluation costs. We collected data on net savings and costs incurred by program participants. However, there were insufficient data on participant cost contributions, and uncertainty and variability in the ways in which net savings were reported and defined across states (and program administrators).

Billingsley, Megan A.; Hoffman, Ian M.; Stuart, Elizabeth; Schiller, Steven R.; Goldman, Charles A.; LaCommare, Kristina

2014-03-19T23:59:59.000Z

123

DEMEC Member Utilities- Green Energy Program Incentives (8 utilities)  

Broader source: Energy.gov [DOE]

'''''Note: The municipal electric utilities serving New Castle, Clayton, Lewes, Middletown, Smyrna, and Seaford do not offer any rebates for individual renewable energy systems. Please see the...

124

Cyber Security Challenges in Using Cloud Computing in the Electric Utility Industry  

SciTech Connect (OSTI)

This document contains introductory material that discusses cyber security challenges in using cloud computing in the electric utility industry.

Akyol, Bora A.

2012-09-01T23:59:59.000Z

125

Industrial energy-efficiency-improvement program  

SciTech Connect (OSTI)

Progress made by industry toward attaining the voluntary 1980 energy efficiency improvement targets is reported. The mandatory reporting population has been expanded from ten original industries to include ten additional non-targeted industries and all corporations using over one trillion Btu's annually in any manufacturing industry. The ten most energy intensive industries have been involved in the reporting program since the signing of the Energy Policy and Conservation Act and as industrial energy efficiency improvement overview, based primarily on information from these industries (chemicals and allied products; primary metal industry; petroleum and coal products; stone, clay, and glass products; paper and allied products; food and kindred products; fabricated metal products; transportation equipment; machinery, except electrical; and textile mill products), is presented. Reports from industries, now required to report, are included for rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products. Additional data from voluntary submissions are included for American Gas Association; American Hotel and Motel Association; General Telephone and Electronics Corporation; and American Telephone and Telegraph Company. (MCW)

Not Available

1980-12-01T23:59:59.000Z

126

THE DEPARTMENT OF Mechanical & Industrial Engineering's graduate programs ed-  

E-Print Network [OSTI]

THE DEPARTMENT OF Mechanical & Industrial Engineering's graduate programs ed- ucate students Mechanical and Industrial Engineering faculty members conduct research in affiliation with vari- ous College I N Industrial Engineering Department of Mechanical & Industrial Engineering 3131 Seamans Center

Kusiak, Andrew

127

Ocala Utility Services- Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Ocala Utility Services Electric and Telecommunications is a community owned utility that serves around 50,000 customers in Ocala and Marion County area. Ocala Utility Services offers rebates on A/C...

128

Single-Issue Industrial Revenue Bond Program (Missouri)  

Broader source: Energy.gov [DOE]

The Missouri Development Finance Board administers a Single-Issue Tax-Exempt Industrial Revenue Bond Program as well as a Taxable Industrial Revenue Bond Program. The Tax-Exempt Program finances (i...

129

Liberty Utilities (Gas)- Commercial Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

'''Liberty Utilities has assumed National Grid's customers base in the state of New Hampshire. Customers should contact Liberty Utilities for questions regarding incentive availability.'''

130

Designing a Thermal Energy Storage Program for Electric Utilities  

E-Print Network [OSTI]

Electric utilities are looking at thermal energy storage technology as a viable demand side management (DSM) option. In order for this DSM measure to be effective, it must be incorporated into a workable, well-structured utility program. This paper...

Niehus, T. L.

1994-01-01T23:59:59.000Z

131

CenterPoint Energy- Commercial and Industrial Standard Offer Program  

Broader source: Energy.gov [DOE]

CenterPoint Energy's Commercial and Industrial Standard Offer Program pays incentives to service providers who install energy efficiency measures in commercial or industrial facilities that are...

132

DOE Hydrogen and Fuel Cells Program Record, Record # 13008: Industry...  

Broader source: Energy.gov (indexed) [DOE]

Record 13008: Industry Deployed Fuel Cell Powered Lift Trucks DOE Hydrogen and Fuel Cells Program Record, Record 13008: Industry Deployed Fuel Cell Powered Lift Trucks...

133

Tools to Boost Steam System Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet describes how the Industrial Technologies Program steam software tools can help industrial plants identify steam system improvements to save energy and money.

Not Available

2008-12-01T23:59:59.000Z

134

PPL Electric Utilities- Custom Energy Efficiency Program  

Broader source: Energy.gov [DOE]

Prospective applicants should contact their PPL Electric Utilities Key Account Manager before beginning any project. If applicants do not have one, they should contact the utility at the phone or...

135

New Braunfels Utilities- Energy Efficiency and Water Conservation Rebate Programs  

Broader source: Energy.gov [DOE]

New Braunfels Utilities offer a variety of programs encouraging its customers to make their homes more energy efficiency. Rebates are available for washing machines, air conditioners, heat pumps,...

136

Cedar Falls Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

The Cedar Falls Utilities (CFU) Energy Efficiency Rebate Program provides rebates for energy efficient heating and cooling equipment, thermal envelope improvements and appliance recycling. The...

137

City of Palo Alto Utilities- Smart Energy Rebate Program  

Broader source: Energy.gov [DOE]

City of Palo Alto Utilities offers incentives to residential customers to increase the energy efficiency of homes through the Smart Energy Rebate Program. Rebates are offered for qualifying...

138

PPL Electric Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

PPL Electric Utilities offers numerous rebates and incentives for its residential customers. Refer to the program web site for complete details.

139

Orlando Utilities Commission- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Orlando Utilities Commission (OUC) offers rebates on a variety of energy efficient improvements for residential customers. Customers should view the program brochure on the web site listed above...

140

Colorado Springs Utilities- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

The Colorado Springs Utilities (CSU) Business Energy and Water Efficiency Rebate Program offers a variety of incentives to business customers who upgrade evaporative cooling, HVAC, irrigation,...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Colorado Springs Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Colorado Springs Utilities offers a variety of energy and water efficiency incentives to its residential customers through the Residential Rebate Program. Rebates are offered for single and multi...

142

Florida Public Utilities- Commercial Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

Florida Public Utilities offers the Energy for Life Conservation program to commercial electric customers to save energy in facilities. Rebates are available for lighting, chiller, heat pump, air...

143

Kentucky Utilities Company- Residential Energy Efficiency Rebate Program (Kentucky)  

Broader source: Energy.gov [DOE]

Kentucky Utilities Company's Home Energy Rebate program provides incentives for residential customers to upgrade to energy efficiency home appliances and heat and air conditioning equipment. ...

144

Central Lincoln People's Utility District- Residential Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

Central Lincoln People's Municipal Utility District (CLPUD) offers a variety of energy efficiency programs for residential customers to save energy in eligible homes. Rebates are available for...

145

Orange and Rockland Utilities (Electric)- Residential Appliance Recycling Program  

Broader source: Energy.gov [DOE]

Orange and Rockland Utilities provides rebates for residential customers for recycling older, inefficient refrigerators and freezers. All appliances must meet the program requirements listed on the...

146

Orange and Rockland Utilities (Electric)- Residential Efficiency Program (New York)  

Broader source: Energy.gov [DOE]

Orange and Rockland Utilities provides rebates for residential customers for recycling older, inefficient refrigerators and freezers. All appliances must meet the program requirements listed on the...

147

Brownsville Public Utilities Board- Green Living Residential Rebate Program  

Broader source: Energy.gov [DOE]

Brownsville Public Utilities Board offers residential customers rebates for installation of energy efficient measures. Through the Green Living Rebate program, customers can apply for rebates for...

148

antimicrobial utilization program: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of energy conservation measures (ECMs... Lau, K.; Henderson, G.; Hebert, D. 3 Demand Response Programs Oregon Public Utility Commission Power Transmission, Distribution...

149

Utility Rebates and Incentive Programs (Fact Sheet)  

SciTech Connect (OSTI)

Fact sheet overview of the Federal Utility Partnership Working Group (FUPWG), including group objectives, activities, and services.

Not Available

2009-07-01T23:59:59.000Z

150

The Future of Utility Customer-Funded Energy Efficiency Programs  

E-Print Network [OSTI]

LBNL-5803E The Future of Utility Customer- Funded Energy Efficiency Programs in the United States Customer-Funded Energy Efficiency Programs in the United States: Projected Spending and Savings to 2025

151

Orlando Utilities Commission- Home Energy Efficiency Fix-Up Program  

Broader source: Energy.gov [DOE]

Orlando Utilities Commission's Home Energy Fix-Up Program provides assistance to low-income residential customers. To qualify for the program the total annual family income must be less than $40...

152

City of Palo Alto Utilities- Solar Water Heating Program  

Broader source: Energy.gov [DOE]

City of Palo Alto Utilities is offering incentives for their residential, commercial and industrial customers to install solar water heating systems on their homes and facilities with a goal of 1...

153

Riverside Public Utilities- Residential PV Incentive Program  

Broader source: Energy.gov [DOE]

'''''Note: Funding for this program has been exhausted for the remainder of the fiscal year. The program is scheduled to reopen on July 1, 2014. '''''

154

The geothermal partnership: Industry, utilities, and government meeting the challenges of the 90's  

SciTech Connect (OSTI)

Each year the Geothermal Division of the US Department of Energy conducts an in-depth review of its entire geothermal R D program. The conference serves several purposes: a status report on current R D activities, an assessment of progress and problems, a review of management issues, and a technology transfer opportunity between DOE and the US geothermal community. This year's conference, Program Review IX, was held in San Francisco on March 19--21, 1991. The theme of this review was The Geothermal Partnership -- Industry, Utilities, and Government Meeting the Challenges of the 90's.'' The importance of this partnership has increased markedly as demands for improved technology must be balanced with available research resources. By working cooperatively, the geothermal community, including industry, utilities, DOE, and other state and federal agencies, can more effectively address common research needs. The challenge currently facing the geothermal partnership is to strengthen the bonds that ultimately will enhance opportunities for future development of geothermal resources. Program Review IX consisted of eight sessions including an opening session. The seven technical sessions included presentations by the relevant field researchers covering DOE-sponsored R D in hydrothermal, hot dry rock, and geopressured energy and the progress associated with the Long Valley Exploratory Well. Individual papers have been cataloged separately.

Not Available

1991-01-01T23:59:59.000Z

155

Energy Efficient Industrialized Housing Research Program. Annual report, FY 1991  

SciTech Connect (OSTI)

Six area reported progress in the Energy Efficient Industrialized Housing Research Program during FY 1991. As part of Industry Guidance, meetings were held with steering and technical committees in computers, housing design and manufacturing. This task area enables the program to benefit from the expertise of industry representatives and communicate research results directly to them. As part of the Design Process performance specifications were being developed for the future housing system designed last year. These house designs coordinate and optimize predicted and desirable advances in computerized design processes, materials, components, and manufacturing automation to achieve energy efficiency at reduced first cost. Energy design software were being developed for CAD systems, stressed skin insulating core panel manufacturers; and a prototype energy sales tool. A prototype design was to be developed to integrate one or more subsystems with the building skin. As part of the Manufacturing Process we are developing a manufacturing process simulation and data base to help current and new entrants to the industrialized housing industry in assessing the impact of implementing new manufacturing techniques. For Evaluation we are developing testing plans for six units of housing on the UO campus and the stressed skin insulating core house to be constructed in Oregon. The DOW Chemical test structure will be retrofitted with a tile roof and retested to compare to the dome and conventional construction structures. Calibration of the wind tunnel will be completed so that laboratory tests can be conducted to simulate the ventilation cooling efficiency of houses in design. Research utilization and program management were either aspects of this program.

Not Available

1992-03-01T23:59:59.000Z

156

A R&D Program for Advanced Industrial Heat Pumps  

E-Print Network [OSTI]

The overall goal of the DOE Industrial Heat Pump Program is to foster research and development which will allow more efficient and economical recovery of waste energy in industry. Specifically, the program includes the identification of appropriate...

Hayes, A. J.

157

Entergy New Orleans- Small Commercial and Industrial Solutions Program  

Broader source: Energy.gov [DOE]

The Commercial and Industrial Solutions Program is an energy efficiency program designed to help business customers understand and make energy efficiency improvements in eligible facilities. The...

158

Lassen Municipal Utility District- PV Rebate Program  

Broader source: Energy.gov [DOE]

Lassen Municipal Utility District (LMUD) is providing incentives for its customers to purchase solar electric photovoltaic (PV) systems. Rebate levels will decrease annually over the life of the...

159

Dover Public Utilities- Green Energy Program Incentives  

Broader source: Energy.gov [DOE]

Delaware's municipal utilities provide incentives for solar photovoltaic (PV), solar thermal, wind, geothermal, and fuel cell systems installed by their electric customers. Eligibility is limited...

160

Rochester Public Utilities- Solar Rebate Program  

Broader source: Energy.gov [DOE]

Rochester Public Utilities provides incentives for residential and commercial customers to install photovoltaic (PV) and solar water heating systems. Qualifying PV systems can earn $1 per watt...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Owatanna Public Utilities- Solar Rebate Program  

Broader source: Energy.gov [DOE]

Owatanna Public Utilities provides incentives for their residential and commercial customers to install photovoltaic (PV) and solar water heating systems. Qualifying PV systems can earn $1 per watt...

162

Hutchinson Utilities Commission- Commercial Energy Efficiency Program  

Broader source: Energy.gov [DOE]

Hutchinson Utilities Commission (HUC) offers rebates to commercial customers in Hutchinson who perform energy conservation improvements to their businesses. These rebates are limited to one...

163

Industrial Technologies Program ORNL-developed cast nickel aluminide rolls  

E-Print Network [OSTI]

intensity by 25% over ten years and to reduce industry's carbon footprint. The program works to develop). Our program works to reduce industrial energy intensity and to develop energy saving products with industry to reduce energy use and carbon emissions and to improve industrial competitiveness. We

164

Entergy Arkansas- Commercial and Industrial Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

Entergy Arkansas has several programs to help commercial and industrial customers increase the energy efficiency of eligible facilities.

165

An Evaluation of Industrial Heat Pumps for Effective Low-Temperature Heat Utilization  

E-Print Network [OSTI]

The implementation of industrial heat pumps utilizing waste water from various industrial processes for the production of process steam is presented as a viable economic alternative to a conventional fossil-fired boiler and as an effective fuel...

Leibowitz, H. M.; Colosimo, D. D.

1980-01-01T23:59:59.000Z

166

Robust Output Feedback Stabilization of Nonlinear Interconnected Systems with Application to an Industrial Utility Boiler  

E-Print Network [OSTI]

to an Industrial Utility Boiler Adarsha Swarnakar, Horacio Jose Marquez and Tongwen Chen Abstract-- This paper boiler (Utility boiler), where the nonlinear model describes the complicated dynamics of the drum

Marquez, Horacio J.

167

ERHAN KUTANOGLU Graduate Program in Operations Research and Industrial Engineering  

E-Print Network [OSTI]

ERHAN KUTANOGLU Graduate Program in Operations Research and Industrial Engineering Department · As a tenured faculty member in the Operations Research and Industrial Engineering Graduate Program, develop School of Engineering Co-Director, Industrial Affiliates Program January 2012 ­ Present Advanced

Kutanoglu, Erhan

168

Industrial Advanced Turbine Systems Program overview  

SciTech Connect (OSTI)

DOE`s ATS Program will lead to the development of an optimized, energy efficient, and environmentally friendly gas turbine power systems in the 3 to 20 MW class. Market studies were conducted for application of ATS to the dispersed/distributed electric power generation market. The technology studies have led to the design of a gas-fired, recuperated, industrial size gas turbine. The Ceramic Stationary Gas Turbine program continues. In the High Performance Steam Systems program, a 100 hour development test to prove the advanced 1500 F, 1500 psig system has been successfully completed. A market transformation will take place: the customer will be offered a choice of energy conversion technologies to meet heat and power generation needs into the next century.

Esbeck, D.W.

1995-12-31T23:59:59.000Z

169

Utility Partnership Webinar Series: State Mandates for Utility Energy Efficiency  

Broader source: Energy.gov [DOE]

This webinar highlights state mandates from throughout the country, and how they’ve influenced utility industrial energy efficiency programs.

170

City of Lompoc Utilities- PV Rebate Program  

Broader source: Energy.gov [DOE]

City of Lompoc Utilities provides rebates to its electric customers who purchase and install photovoltaic (PV) systems. The rebate is $2.00 per watt-AC. The incentive amount may not exceed 50% the...

171

Lake Worth Utilities- Energy Conservation Rebate Program  

Broader source: Energy.gov [DOE]

The City of Lake Worth Utilities, in conjunction with Florida Municipal Power Agency, offers a variety of rebates to residential and commercial customers for upgrading to energy saving equipment....

172

Fort Collins Utilities- Home Efficiency Program  

Broader source: Energy.gov [DOE]

Fort Collins Utilities (FCU) provides rebates for customers living in existing single-family homes who pursue energy efficiency projects. Either the Efficiency Audit or Efficiency Audit Plus is a...

173

Utilizing Industrial Engineers to Implement "Lean Enterprise" at Company A  

E-Print Network [OSTI]

Industrial Engineers (IEs) have a wide breadth of knowledge that has proven to benefit organizations in a variety of ways. As process improvement experts with education in engineering, quality, and business, Industrial Engineers are skilled...

Stein, Jean D'Ann

2012-12-14T23:59:59.000Z

174

Sandia National Laboratories: Utility Operations and Programs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Generator Modeling Radar Friendly Blades Special Programs Techno-Economic Modeling, Analysis, and Support Analysis, Modeling, Cost of Energy, and Policy Impact: Wind Vision 2014...

175

Industrial-Utility Cooperation: Moving Into Strategic Alliance  

E-Print Network [OSTI]

the utility would do anything and that IS exactly what is happening. Instead, ask questions that indicate your utility is working consistent with the customer's time lines, financial constraints, etc. Always add a blank space for su~gestions...

Gilbert, J. S.

176

Abstract--With the deregulation and restructuring of utility industry, many substation automation applications are being  

E-Print Network [OSTI]

1 Abstract--With the deregulation and restructuring of utility industry, many substation automation serves as a handy tool for substation automation related studies. Index Terms--Alternative Transient the deregulation and restructuring of utility industry, it is desirable to introduce more automated functions

177

Industrial Consortium for the Utilization of the Geopressured-Geothermal Resource. Volume 1  

SciTech Connect (OSTI)

The Geopressured-Geothermal Program, now in its fifteenth year, is entering the transition period to commercial use. The industry cost-shared proposals to the consortium, represented in the presentations included in these proceedings, attest to the interest developing in the industrial community in utilizing the geopressured-geothermal resource. Sixty-five participants attended these sessions, two-thirds of whom represented industry. The areas represented by cost-shared proposals include (1) thermal enhanced oil recovery, (2) direct process use of thermal energy, e.g., aquaculture and agriculture, (3) conversion of thermal energy to electricity, (4) environment related technologies, e.g., use of supercritical processes, and (5) operational proposals, e.g., a field manual for scale inhibitors. It is hoped that from this array of potential use projects, some will persist and be successful in proving the viability of using the geopressured-geothermal resource. Such industrial use of an alternative and relatively clean energy resource will benefit our nation and its people.

Negus-deWys, J. (ed.)

1990-03-01T23:59:59.000Z

178

Industrial Consortium for the Utilization of the Geopressured-Geothermal Resource. Volume 2  

SciTech Connect (OSTI)

The Geopressured-Geothermal Program, now in its fifteenth year, is entering the transition period to commercial use. The industry cost-shared proposals to the consortium, represented in the presentations included in these proceedings, attest to the interest developing in the industrial community in utilizing the geopressured-geothermal resource. Sixty-five participants attended these sessions, two-thirds of whom represented industry. The areas represented by cost-shared proposals include (1) thermal enhanced oil recovery, (2) direct process use of thermal energy, e.g., aquaculture and agriculture, (3) conversion of thermal energy to electricity, (4) environment related technologies, e.g., use of supercritical processes, and (5) operational proposals, e.g., a field manual for scale inhibitors. It is hoped that from this array of potential use projects, some will persist and be successful in proving the viability of using the geopressured-geothermal resource. Such industrial use of an alternative and relatively clean energy resource will benefit our nation and its people.

Negus-deWys, J. (ed.)

1990-03-01T23:59:59.000Z

179

AEP Appalachian Power - Commercial and Industrial Rebate Programs...  

Broader source: Energy.gov (indexed) [DOE]

150,000 will be reviewed on a case-by-case basis Program Info Start Date 3112011 State West Virginia Program Type Utility Rebate Program Rebate Amount UnitarySplit ACAir...

180

Characterizing the Response of Commercial and Industrial Facilities to Dynamic Pricing Signals from the Utility  

SciTech Connect (OSTI)

We describe a method to generate statistical models of electricity demand from Commercial and Industrial (C&I) facilities including their response to dynamic pricing signals. Models are built with historical electricity demand data. A facility model is the sum of a baseline demand model and a residual demand model; the latter quantifies deviations from the baseline model due to dynamic pricing signals from the utility. Three regression-based baseline computation methods were developed and analyzed. All methods performed similarly. To understand the diversity of facility responses to dynamic pricing signals, we have characterized the response of 44 C&I facilities participating in a Demand Response (DR) program using dynamic pricing in California (Pacific Gas and Electric's Critical Peak Pricing Program). In most cases, facilities shed load during DR events but there is significant heterogeneity in facility responses. Modeling facility response to dynamic price signals is beneficial to the Independent System Operator for scheduling supply to meet demand, to the utility for improving dynamic pricing programs, and to the customer for minimizing energy costs.

Mathieu, Johanna L.; Gadgil, Ashok J.; Callaway, Duncan S.; Price, Phillip N.; Kiliccote, Sila

2010-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Willmar Municipal Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Willmar Municipal Utilities offer rebates on Energy Star rated appliances and air conditioners and Marathon water heaters. In addition to these rebates, WMU also offers a Load Sharing Program. ...

182

Rock Hill Utilities- Water Heater and Heat Pump Rebate Program  

Broader source: Energy.gov [DOE]

Through the SmartChoice program, Rock Hill Utilities offers rebates for water heater and heat pump replacements. Information on financing for heat pumps can also be found on the web site listed...

183

College Station Utilities- Residential Energy Back II Rebate Program  

Broader source: Energy.gov [DOE]

College Station Utilities offers an incentive for residential customers to install energy efficient HVAC equipment through the Energy Back II Program. To qualify for the rebate, the A/C system...

184

Gainesville Regional Utilities- Solar Water Heating Rebate Program  

Broader source: Energy.gov [DOE]

The Gainesville Regional Utilities (GRU) Solar Rebate Program, established in early 1997 as part of GRU's demand-side management initiatives, provides rebates of $500 to residential customers of...

185

Orlando Utilities Commission- Commercial Energy Efficiency Rebate Program (Florida)  

Broader source: Energy.gov [DOE]

Orlando Utilities Commission (OUC) offers rebates on a variety of energy efficient improvements for commercial customers. Customers should view the program brochure on the web site listed above for...

186

Fort Collins Utilities- Residential and Small Commercial Appliance Rebate Program  

Broader source: Energy.gov [DOE]

Fort Collins Utilities offers a number of appliance and recycling rebates to residential and small commercial customers. The appliance rebate program offers a $50 rebate for Energy Star rated...

187

Florida Public Utilities (Gas)- Residential Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

Florida Public Utilities offers the Energy for Life Conservation Program to its residential natural gas customers to save energy in their homes. Rebates are available for existing residences and...

188

Deregulation and environmental differentiation in the electric utility industry  

E-Print Network [OSTI]

Press. Portland General Electric Company. 2004. Renewablegreen power is Portland General Electric. The utility workswind energy use (Portland General Electric, 2004). From the

Delmas, M; Russo, M V; Montes-Sancho, M J

2007-01-01T23:59:59.000Z

189

Deregulation and environmental differentiation in the electric utility industry  

E-Print Network [OSTI]

data on two types of renewables (hydroelectric facilitiesand non-hydroelectric facilities) for utilities in each ofdifference for hydroelectric facilities. However, for those

Delmas, M; Russo, M V; Montes-Sancho, M J

2007-01-01T23:59:59.000Z

190

Energy Department Develops Tool with Industry to Help Utilities...  

Energy Savers [EERE]

White House initiative to develop a Cybersecurity Capability Maturity Model for the electricity sector, which aims to support the private sector and utilities nationwide in...

191

Utility Battery Storage Systems Program report for FY93  

SciTech Connect (OSTI)

Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Energy Management. In this capacity, Sandia is responsible for the engineering analyses, contract development, and testing of rechargeable batteries and systems for utility-energy-storage applications. This report details the technical achievements realized during fiscal year 1993.

Butler, P.C.

1994-02-01T23:59:59.000Z

192

Utility Rebate Program | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UC 19-6-401UpsonUtah StateLoadingGrant Program JumpProgram Jump

193

School Focused Utility Programs in Texas  

E-Print Network [OSTI]

rights reserved. Program Services ? Mission: Achieve sustained school investment in cost effective energy efficiency ? Benchmarking/Master Planning to create the resolve to invest ? Project development and review ? Technical and financial... justification ? Project documentation assistance ? Cash Incentives (lower than Standard Offer) ? Tell the story ? PR, Check Presentations ? 2011 CLEAResult ? All rights reserved. Sample Benchmarking Report ? Understand the energy consumption and cost...

Santos, B.; Negley, M.

2012-01-01T23:59:59.000Z

194

Extractive Industries and Sustainable Development EXECUTIVE TRAINING PROGRAM  

E-Print Network [OSTI]

Industries and Sustainable Development EXECUTIVE TRAINING PROGRAM Vale Columbia Center UNIVERSITY Center on Globalization and Sustainable Development EARTH INSTITUTE | COLUMBIA UNIVERSITY #12; Extractive Industries and Sustainable Development Executive Training

195

DOE Hydrogen and Fuel Cells Program Record #13007: Industry Deployed...  

Broader source: Energy.gov (indexed) [DOE]

13007: Industry Deployed Fuel Cell Backup Power (BuP) DOE Hydrogen and Fuel Cells Program Record 13007: Industry Deployed Fuel Cell Backup Power (BuP) This record from the DOE...

196

Establishment of a Graduate Certificate Program in Biobased Industrial Products – Final Technical Report  

SciTech Connect (OSTI)

A certificate of graduate studies in Biobased Industrial Products is to be established at Kansas State University (KSU) along with the development of a similar program at Pittsburg State University, Pittsburg, KS. At KSU, the program of study will be coordinated through the steering committee of the Agricultural Products Utilization Forum (APUF); the certificate of graduate studies will be awarded through the Graduate School of Kansas State University. This certificate will establish an interdisciplinary program of study that will: (1) ensure participating students receive a broad education in several disciplines related to Biobased Industrial Products, (2) provide a documented course of study for students preferring a freestanding certificate program, and (3) provide a paradigm shift in student awareness away from petroleum-based feedstocks to the utilization of renewable resources for fuels and chemical feedstocks. The academic program described herein will accomplish this goal by: (1) providing exposure to several academic disciplines key to Biobased Industrial Products; (2) improving university/industry collaboration through an external advisory board, distance learning opportunities, and student internships; (3) expanding the disciplines represented on the students' supervisory committee; (4) establishing a seminar series on Biobased Industrial Products that draws upon expert speakers representing several disciplines; and (5) increasing collaboration between disciplines. Numerous research programs emphasizing Biobased Industrial Products currently exist at KSU and PSU. The certificate of graduate studies, the emphasis on interdisciplinary collaboration within the students? thesis research, the proposed seminar series, and formation of an industrial advisory board will: (1) provide an interdisciplinary academic experience that spans several departments, four colleges, four research centers, and two universities; (2) tangibly promote collaboration between KSU and PSU; (3) catalyze involvement of plant geneticists with researchers active in the development and utilization of biobased industrial products; and, (4) promote university/industry collaboration.

John R. Schlup

2005-11-04T23:59:59.000Z

197

A Proposed Framework for Improving IT Utilization in the Energy Industry  

E-Print Network [OSTI]

Abstract—The purpose of this study is to suggest direction for future study of the energy-IT industry that will be used for framework to increase IT utilization in the energy industry. Recently, Green IT is a becoming global issue because of global environmental pollution. Also, IT roles in energy industry are becoming more important. However, the related studies were IT industry oriented that is not sufficient to make plan for Green energy. Therefore, after analyzing existing studies related to Green energy and Green IT, re-categorization for Green energy-IT industry was suggested. Direction of framework is based on energy industry that enable to link between energy and IT. The results of this study suggest comprehensive insight to Green energy-IT industry. Thus it is able to provide useful implications and guidelines to increase IT utilization in the energy industry.

Jin Kyung Park; Ji Yeon Cho; Yong Ho Shim; Su Jin Kim; Bong Gyou Lee

198

Electric-utility DSM programs: Terminology and reporting formats  

SciTech Connect (OSTI)

The number, scope, effects, and costs of electric-utility demand-site management programs are growing rapidly in the United States. Utilities, their regulators, and energy policy makers need reliable information on the costs of, participation in, and energy and load effects of these programs to make informed decisions. In particular, information is needed on the ability of these programs to cost-effectively provide energy and capacity resources that are alternatives to power plants. This handbook addresses the need for additional and better information in two ways. First, it discusses the key concepts associated with DSM-program types, participation, energy and load effects, and costs. Second, the handbook offers definitions and a sample reporting form for utility DSM programs. The primary purpose in developing these definitions and this form is to encourage consistency in the collection and reporting of data on DSM programs. To ensure that the discussions, reporting formats, and definitions will be useful and used, development of this handbook was managed by a committee, with membership from electric utilities, state regulatory commissions, and the US Department of Energy. Also, this data-collection form was pretested by seven people from six utilities, who completed the form for nine DSM programs.

Hirst, E. [Oak Ridge National Lab., TN (United States); Sabo, C. [Barakat and Chamberlin, Inc., Washington, DC (United States)

1991-10-01T23:59:59.000Z

199

Office of Industry Research and Technology Programs Greetings to Industry  

E-Print Network [OSTI]

Assistant Vice President, Corporate & Foundation Relations Inside this issue... Greetings to Industry. The founding members are American Axle and Manufacturing, Eaton Corpora- tion and John Deere. This applied

Ginzel, Matthew

200

The Industries of the Future Program: What's in it for Texas Industries?  

E-Print Network [OSTI]

The purpose of the TEXAS INDUSTRIES OF THE FUTURE program is to facilitate the development, demonstration and adoption of emerging technologies that reduce industrial energy usage, emissions, and associated costs, resulting in improved competitive...

Ferland, K. A.

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Manufacturers and Utilities to Accelerate Industry Uptake of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Industry Uptake of Superior Energy Performance December 20, 2013 - 11:40am Addthis At a White House meeting of the Better Buildings Initiative on December 3rd, six manufacturers...

202

Application of Expert Systems to Industrial Utility Equipment Optimization  

E-Print Network [OSTI]

of 154 rules to effectively manage the maintenance requirements of an air compressor. Chillers Refrigeration systems in industry are widespread, with chilled water used for both process needs and HVAC cooling. Refrigeration systems can account... for a large proportion of total energy usage in a facility, particularly in industries such as cold storage (90%), retail (70%) and ice cream manufacturing (70%) (“Refrigeration Systems” 2011). Due to the varying types of compressor normally...

Hayes,S.; Burton,K.; O'Sullivan,D.

2014-01-01T23:59:59.000Z

203

Utility Conservation Programs: A Regulatory and Design Framework  

E-Print Network [OSTI]

, it provides that a conservation program may be implemented as long as the utility's revenue requirements (the total costs to the utility of providing electric services) do not rise over what they would have been in the absence of a utility conservation... is to achieve the greatest reduction in revenue requirements (to provide electric services at least cost to society), a utility would never pay an incentive for an in dividual ECO greater than the marginal cost it saves. If it offered incentives greater...

Norland, D. L.; Wolf, J. L.

204

Oklahoma Municipal Power Authority- Commercial and Industrial Energy Efficiency Program  

Broader source: Energy.gov [DOE]

The Oklahoma Municipal Power Authority (OMPA) offers the Demand and Energy Efficiency Program (DEEP) to eligible commercial, industrial, and municipal government customers served by OMPA. This...

205

Duke Energy- Small Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Duke Energy encourages its business customers to increase the energy efficiency of eligible facilities through the Commercial and Industrial Energy Efficiency Rebate Program. The equipment rebates...

206

Lincoln Electric System (Commercial and Industrial)- Sustainable Energy Program  

Broader source: Energy.gov [DOE]

Lincoln Electric System (LES) offers a variety of energy efficiency incentives for commercial and industrial customers through the Sustainable Energy Program (SEP). Some incentives are provided on...

207

DTE Energy (Electric)- Commercial and Industrial Energy Efficiency Program  

Broader source: Energy.gov [DOE]

DTE Energy's Commercial Your Energy Savings Program provides prescriptive incentives to commercial and industrial customers who implement energy efficiency upgrades in facilities. Custom incentives...

208

Dakota Electric Association- Commercial and Industrial Custom Energy Grant Program  

Broader source: Energy.gov [DOE]

Dakota Electric's Custom Energy Grant Program is offered for any commercial or industrial customer that installs qualifying energy-efficient products which exceed conventional models and result in...

209

Advanced Industrial Materials Program. Annual progress report, FY 1993  

SciTech Connect (OSTI)

Mission of the AIM program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDAs. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

Stooksbury, F. [comp.

1994-06-01T23:59:59.000Z

210

Utility Grant Program | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UC 19-6-401UpsonUtah StateLoadingGrant Program Jump to:

211

Regulatory and policy implications of Federal legislation on utility DSM programs  

SciTech Connect (OSTI)

This paper reviews some potential consequences of recent Federal legislation to demand-side management (DSM) at utilities. The legislation discussed are the 1992 Energy Policy Act (EPAct), the 1990 Amendments to the Clean Air Act, and FERC Order No. 636. Examples of specific activities regarding DSM in Pennsylvania are included for illustration. Each of the Federal laws under discussion is unique in terms of origin, goals, and focus. Nevertheless, they all focus on the regulated energy industries such that their effects tend to combine to force massive changes. In die regulated electric and natural gas industries, this synergy is compounding the complexity of management and, at least in the short term, contributing to increases in the cost of doing business. In the long term, these Federal initiatives are likely to lead to a massive reassessment of state-regulated energy sources in production and end use, and their environmental consequences. The overall effect of all three pieces of legislation is to increase competition among the state-regulated utilities. The differences between competitive and regulated industries are noted in a effort to explain the effect of inducing competition among energy utilities. This has particular relevance to utility-sponsored energy-efficiency programs such as DSM and other customer assistance activities. This paper has three objectives. First, it outlines the contents of the Federal legislation regarding utility DSM programs. Second, it explains some of the impacts of these laws and regulations on utility programs, particularly the likely effects of the emerging competitive utility market. Third, it seeks to understand where and how action will be needed to carry out many of the provisions of these laws in the most cost-effective manner.

Hopkins, M.E.F. [Pacific Northwest Lab., Richland, WA (United States); Griffiths, D. [Pennsylvania Public Utility Commission, Harrisburg, PA (United States)

1994-03-01T23:59:59.000Z

212

Reduce NOx and Improve Energy Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet describes how the Industrial Technologies Program NOx and Energy Assessment Tool (NxEAT) can help petroleum refining and chemical plants improve energy efficiency.

Not Available

2008-12-01T23:59:59.000Z

213

Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs  

E-Print Network [OSTI]

Program (WIP). “History of the State Energy Program. ”and history of utility customer- funded programs, institutional capacity of state energyand history of utility customer-funded programs, institutional capacity of state energy

Goldman, Charles A.

2011-01-01T23:59:59.000Z

214

Energy Efficiency Fund (Electric)- Commercial and Industrial Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

All Connecticut Utilities implement electric and gas efficiency rebate programs funded by Connecticut's public benefits charge through the Energy Efficiency Fund. The Connecticut Light and Power...

215

Interactions Between Energy Efficiecy Programs Funded Under Recover Act and Utility Customer-funded Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

Interactions Between Energy Efficiecy Programs Funded Under Recover Act and Utility Customer-funded Energy Efficiency Programs Webinar.

216

The Utility-Industry Partnership for Economic Development: A Troubled Marriage?  

E-Print Network [OSTI]

The electric utilities' relationship with their industrial customers and the importance of the product and services that they offer, uniquely position them as an influential player in the economy of the communities that they serve. Traditionally...

Haeri, M. H.; Shaffer, S.

217

Evaluation of Industrial Energy Options for Cogeneration, Waste Heat Recovery and Alternative Fuel Utilization  

E-Print Network [OSTI]

This paper describes the energy options available to Missouri industrial firms in the areas of cogeneration, waste heat recovery, and coal and alternative fuel utilization. The project, being performed by Synergic Resources Corporation...

Hencey, S.; Hinkle, B.; Limaye, D. R.

1980-01-01T23:59:59.000Z

218

Evaluation and Design of Utility Co-Owned Cogeneration Systems for Industrial Parks  

E-Print Network [OSTI]

The Electric Power Research Institute, EPRI, is currently evaluating the potential of utility co-owned cogeneration facilities in industrial parks. This paper describes part of the work performed by one of EPRI's contractors, Impell Corporation...

Hu, D. S.; Tamaro, R. F.; Schiller, S. R.

1984-01-01T23:59:59.000Z

219

Impact of Industrial Electric Rate Structure on Energy Conservation - A Utility Viewpiont  

E-Print Network [OSTI]

As the price of energy rises, changes in industrial electric rates will have an impact on energy usage and conservation. Utilities interested in reducing system peak demands may reflect this need in the rate structure as an incentive...

Williams, M. M.

1981-01-01T23:59:59.000Z

220

Use of Utility Interval Meters in an Industrial Energy Audit  

E-Print Network [OSTI]

This paper describes a unique approach to an energy audit of a large tank farm. The audit was unusual in that it was located out-of-doors and the energy-using equipment was made up almost entirely of pumps. The auditors used the utility interval...

Wallace, M.

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Analytical Methods for Implementing Industrial Load Management Programs  

E-Print Network [OSTI]

Many utilities have completed long-term planning studies and have shown that a load management program is cost effective. They are now actively implementing large-scale, system-wide programs such as demand subscription, interruptable rates, and time...

Hassig, N.; Chan, M.; Carlson, R.

1982-01-01T23:59:59.000Z

222

Research utilization in the building industry: decision model and preliminary assessment  

SciTech Connect (OSTI)

The Research Utilization Program was conceived as a far-reaching means for managing the interactions of the private sector and the federal research sector as they deal with energy conservation in buildings. The program emphasizes a private-public partnership in planning a research agenda and in applying the results of ongoing and completed research. The results of this task support the hypothesis that the transfer of R and D results to the buildings industry can be accomplished more efficiently and quickly by a systematic approach to technology transfer. This systematic approach involves targeting decision makers, assessing research and information needs, properly formating information, and then transmitting the information through trusted channels. The purpose of this report is to introduce elements of a market-oriented knowledge base, which would be useful to the Building Systems Division, the Office of Buildings and Community Systems and their associated laboratories in managing a private-public research partnership on a rational systematic basis. This report presents conceptual models and data bases that can be used in formulating a technology transfer strategy and in planning technology transfer programs.

Watts, R.L.; Johnson, D.R.; Smith, S.A.; Westergard, E.J.

1985-10-01T23:59:59.000Z

223

"2013 Utility Bundled Retail Sales- Industrial"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECSPropaneResidential" "(DataIndustrial"

224

The Gas Utility View of Industrial Energy Conservation  

E-Print Network [OSTI]

~ ! general session of energy decisions and project~ons; functions. Where the environment is supportive, gas supply and regulations; developments in utiiiza there is positive activity. As we move forward into tion equipment and other subjects of broad... to raise capital to support the traditional functions of a gas utility. A key element in conservation is the maintenance Atlanta have been holding during this past decape. Many have been conservation oriented to make g~s go further. Techniques...

Loberg, T. J.

1980-01-01T23:59:59.000Z

225

The Electric Utility Industry--Change and Challenge  

E-Print Network [OSTI]

, quality circles, and strategic planning are but a few of the latest buzzwords making their way around utilities these days. The terms are frequently misunderstood, are sometimes intimidating, and consequently may get in the way of implementing improved... resource needs, be estimated so that intelligent decisions regarding resource allocation, timing and trade-offs can be made. Summgry The process outlined above most closely resembles strategic planning. This procedure represents a structured...

Williams, M. H.

226

The Industry Coupled Case Study Program final report  

SciTech Connect (OSTI)

The Industry Coupled Case Study Program was conceived as a short-term cooperative program between the Federal government and private industry. Federal funds were committed to stimulate geothermal exploration and development between 1977 and 1979, although some work under the program continues into 1982. Federal funding has been phased out and the remaining information developed during the program is being disseminated and reported. This report presents an overview of the program and documents the technical results and open-file data base resulting from the program.

Stringfellow, J. [ed.

1982-10-01T23:59:59.000Z

227

Advanced Industrial Materials (AIM) Program: Annual progress report FY 1995  

SciTech Connect (OSTI)

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This Annual Report for FY 1995 contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Areas covered here are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

NONE

1996-04-01T23:59:59.000Z

228

Decoupling Utility Profits from Sales: Issues for the Photovoltaic Industry  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy CooperationRequirements Matrix DOE-STD-3009-2014ofOutline1:Department ofUtilities, Clean|

229

LWRS Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

utilities across the industry (representing 70% of the existing LWR fleet) and Electric Power Research Institute advises the program. The Utility Working Group developed a...

230

Dereck, Shockley, Xcel Energy's Commercial - Industrial Programs  

Broader source: Energy.gov (indexed) [DOE]

year Energy Efficiency Programs Energy Savings Goals - Colorado 2012: u Business Electric Savings: 199 GWhs u Gas Savings: 435,054 Dth (all programs) u...

231

Energy efficient industrialized housing research program  

SciTech Connect (OSTI)

This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

1989-12-01T23:59:59.000Z

232

Energy efficient industrialized housing research program  

SciTech Connect (OSTI)

This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; Mc Donald, M.; McGinn, B.; Ryan, P.; Sekiguchi, T. (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

1989-01-01T23:59:59.000Z

233

Advanced Industrial Materials (AIM) Program annual progress report, FY 1997  

SciTech Connect (OSTI)

The Advanced Industrial Materials (AIM) Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy, US Department of Energy (DOE). The mission of AIM is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. OIT has embarked on a fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrating on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are the aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans, some of which have been completed. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support.

NONE

1998-05-01T23:59:59.000Z

234

Massachusetts Municipal Commercial Industrial Incentive Program  

Broader source: Energy.gov [DOE]

Certain municipal utilities in Massachusetts, in cooperation with Massachusetts Municipal Wholesale Electric Company ([http://www.mmwec.org/ MMWEC]), have begun offering energy efficiency...

235

Solutia: Massachusetts Chemical Manufacturer Uses SECURE Methodology to Identify Potential Reductions in Utility and Process Energy Consumption. Industrial Technologies Program (ITP) Chemicals BestPractices Plant-Wide Assessment Case Study (Brochure).  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage » SearchEnergyDepartmentScoping Study |4Solid-State Technologies Program

236

Advanced Manufacturing Office (Formerly Industrial Technologies Program)  

E-Print Network [OSTI]

: Manufacturing Energy and Carbon Footprint, derived from 2006 MECS #12;Management Structure and Project Execution, aqueous-based processes). Develop broadly applicable, manufacturing processes that reduce energy intensity-value industries such as the renewable energy industry. Example materials include low-cost carbon fiber, low

237

The Texas Industrial Energy Conservation Program  

E-Print Network [OSTI]

Industry is Texas' largest consumer of energy (46+% of total). With foresight of the escalating cost of energy, it was apparent these additional costs to industry would have two adverse effects. First, the cost of their product to the consumer would...

Waldrop, T.

1982-01-01T23:59:59.000Z

238

Current activities handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the activities each of the thirteen state legislatures potentially affected by the Formerly Utilized Sites Remedial Action Program. It contains a description of the state legislative procedural rules and a schedule of each legislative session; a summary of pending relevant legislation; the name and telephone number of legislative and state agency contacts; and the full text of all bills identified.

none,

1981-02-27T23:59:59.000Z

239

Energy efficient industrialized housing research program  

SciTech Connect (OSTI)

This report summarizes three documents: Multiyear Research Plan, Volume I FY 1989 Task Reports, and Volume II Appendices. These documents describe tasks that were undertaken from November 1988 to December 1989, the first year of the project. Those tasks were: (1) the formation of a steering committee, (2) the development of a multiyear research plan, (3) analysis of the US industrialized housing industry, (4) assessment of foreign technology, (5) assessment of industrial applications, (6) analysis of computerized design and evaluation tools, and (7) assessment of energy performance of baseline and advanced industrialized housing concepts. While this document summarizes information developed in each task area, it doesn't review task by task, as Volume I FY 1989 Task Reports does, but rather treats the subject of energy efficient industrialized housing as a whole to give the reader a more coherent view. 7 figs., 9 refs.

Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

1990-02-01T23:59:59.000Z

240

Practical Training in Microalgae Utilization with Key Industry Engineering Group Key Industry Engineering Group s.r.o. has developed a biotechnology for the production of an animal  

E-Print Network [OSTI]

Practical Training in Microalgae Utilization with Key Industry Engineering Group Key Industry on a suspension of Planktochlorella microalgae. The product consists of a suspension of algae in the growing

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Technology Roadmap Research Program for the Steel Industry  

SciTech Connect (OSTI)

The steel industry's Technology Roadmap Program (TRP) is a collaborative R&D effort jointly sponsored by the steel industry and the United States Department of Energy. The TRP program was designed to develop new technologies to save energy , increase competitiveness, and improve the environment. TRP ran from July, 1997 to December, 2008, with a total program budget of $38 million dollars. During that period 47 R&D projects were performed by 28 unique research organizations; co-funding was provided by DOE and 60 industry partners. The projects benefited all areas of steelmaking and much know-how was developed and transferred to industry. The American Iron and Steel Institute is the owner of all intellectual property developed under TRP and licenses it at commercial rates to all steelmakers. TRP technologies are in widespread use in the steel industry as participants received royalty-free use of intellectual property in return for taking the risk of funding this research.

Joseph R. Vehec

2010-12-30T23:59:59.000Z

242

Industrial cogeneration optimization program. Final report, September 1979  

SciTech Connect (OSTI)

This study program is part of the DOE Integrated Industry Cogeneration Program to optimize, evaluate, and demonstrate cogeneration systems, with direct participation of the industries most affected. One objective is to characterize five major energy-intensive industries with respect to their energy-use profiles. The industries are: petroleum refining and related industries, textile mill products, paper and allied products, chemicals and allied products, and food and kindred products. Another objective is to select optimum cogeneration systems for site-specific reference case plants in terms of maximum energy savings subject to given return on investment hurdle rates. Analyses were made that define the range of optimal cogeneration systems for each reference-case plant considering technology applicability, economic factors, and energy savings by type of fuel. This study also provides guidance to other parts of the program through information developed with regard to component development requirements, institutional and regulatory barriers, as well as fuel use and environmental considerations. (MCW)

Not Available

1980-01-01T23:59:59.000Z

243

Industrial Energy-Efficiency Improvement Program. Annual report to the Congress and the President 1979  

SciTech Connect (OSTI)

The industrial energy efficiency improvement program to accelerate market penetration of new and emerging industrial technologies and practices which will improve energy efficiency; encourage substitution of more plentiful domestic fuels; and enhance recovery of energy and materials from industrial waste streams is described. The role of research, development, and demonstration; technology implementation; the reporting program; and progress are covered. Specific reports from the chemicals and allied products; primary metals; petroleum and coal products; stone, clay, and glass, paper and allied products; food and kindred products; fabricated metals; transportation equipment; machinery (except electrical); textile mill products; rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products are discussed. Additional data from voluntary submissions, a summary on progress in the utilization of recovered materials, and an analysis of industrial fuel mix are briefly presented. (MCW)

Not Available

1980-12-01T23:59:59.000Z

244

Urban and Industrial Sites Reinvestment Tax Credit Program (Connecticut)  

Broader source: Energy.gov [DOE]

The Urban and Industrial Sites Reinvestment Tax Credit Program provides up to $100 million in tax credits over a ten-year period to support projects that create jobs and capital investment in under...

245

Duquesne Light Company- Commercial and Industrial Energy Efficiency Program  

Broader source: Energy.gov [DOE]

Duquesne Light provides rebates on energy-saving equipment to commercial and industrial customers in the eligible service territory. There are 2 types of rebate programs available to all C&I...

246

Large Industrial Renewable Energy Purchase Program (New Brunswick)  

Broader source: Energy.gov [DOE]

Beginning January 1, 2012 the Large Industrial Renewable Energy Purchase Program allows NB Power to purchase renewable energy generated by its largest customers at a rate of $95/MWh. This...

247

Accounting aspects of the Border Industrialization Program of Mexico  

E-Print Network [OSTI]

ACCOUNTING ASPECTS OF THE BORDER INDUSTRIALIZATION PROGRAM OF MEXICO A Thesis CAROL ANN CONKLIN GORDON Submitted to the Graduate College of Texas A&M University in partial fuli'illment of the requirement for the degree of MASTER OF SCIENCE... December 1972 Major Subject: Accounting ACCOUNTING ASPECTS OF THE BORDER INDUSTRIALIZATION PROGRAM OF MEXICO A Thesis by CAROL ANN CONKLIN GORDON Approved as to style and content by: (Chairman of Committee) ( (. o~. - &(. , f. A t;, ~ (Head...

Gordon, Carol Ann Conklin

1972-01-01T23:59:59.000Z

248

Invester-Owned Utilities' 2012-13 Results, 2014 Programs  

E-Print Network [OSTI]

savings going forward ? Deep-dive review of PY2013 programs underway ? Statewide cost = $5.7M ? EM&V costs are program costs for cost-effectiveness analysis Statewide Evaluation, Measurement & Verification (EM&V) Project ESL-KT-13-12-14 CATEE 2013...Clean Air Through Energy Efficiency Conference December 16-18, 2013 San Antonio, Texas ESL-KT-13-12-14 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 So…What Have You Done? Utility Efficiency...

Berny, B.

2013-01-01T23:59:59.000Z

249

Ground-source heat pump case studies and utility programs  

SciTech Connect (OSTI)

Ground-source heat pump systems are one of the promising new energy technologies that has shown rapid increase in usage over the past ten years in the United States. These systems offer substantial benefits to consumers and utilities in energy (kWh) and demand (kW) savings. The purpose of this study was to determine what existing monitored data was available mainly from electric utilities on heat pump performance, energy savings and demand reduction for residential, school and commercial building applications. In order to verify the performance, information was collected for 253 case studies from mainly utilities throughout the United States. The case studies were compiled into a database. The database was organized into general information, system information, ground system information, system performance, and additional information. Information was developed on the status of demand-side management of ground-source heat pump programs for about 60 electric utility and rural electric cooperatives on marketing, incentive programs, barriers to market penetration, number units installed in service area, and benefits.

Lienau, P.J.; Boyd, T.L.; Rogers, R.L.

1995-04-01T23:59:59.000Z

250

MMPA- Commercial and Industrial Energy Efficiency Program  

Broader source: Energy.gov [DOE]

Minnesota Municipal Power Agency (MMPA) generates and purchases electricity for 11 member communities in Minnesota. The following 8 members participate in the MMPA WE Save Business Program:...

251

Evaluating Industrial Conservation Programs: An Interdisciplinary Approach  

E-Print Network [OSTI]

be saved by using them. By improving the efficiency of a particular industrial process, we reduce implicitly the cost of using energy to produce effective work. Once the cost of using energy is reduced, a producer may become more energy-intensive, much...

Einhorn, M. A.

252

Special Issues for Program Design and Evaluation for Industrial Energy Programs  

E-Print Network [OSTI]

Designing energy efficiency programs that include serving industrial customers, and evaluating them, carries with it a set of challenges. A summary view from prior efficiency program evaluations will be presented that examines these challenges, how...

Megdal, L.

2007-01-01T23:59:59.000Z

253

The EPRI/DOE Utility Wind Turbine Performance Verification Program  

SciTech Connect (OSTI)

In 1992, the Electric Power Research Institute (EPRI) and the US Department of Energy (DOE) initiated the Utility Wind Turbine Performance Verification Program (TVP). This paper provides an overview of the TVP, its purpose and goals, and the participating utility projects. Improved technology has significantly reduced the cost of energy from wind turbines since the early 1980s. In 1992, turbines were producing electricity for about $0.07--$0.09/kilowatt-hour (kWh) (at 7 m/s [16 mph sites]), compared with more than $0.30/kWh in 1980. Further technology improvements were expected to lower the cost of energy from wind turbines to $0.05/kWh. More than 17,000 wind turbines, totaling more than 1,500 MW capacity, were installed in the US, primarily in California and Hawaii. The better wind plants had availabilities above 95%, capacity factors exceeding 30%, and operation and maintenance costs of $0.01/kWh. However, despite improving technology, EPRI and DOE recognized that utility use of wind turbines was still largely limited to turbines installed in California and Hawaii during the 1980s. Wind resource assessments showed that other regions of the US, particularly the Midwest, had abundant wind resources. EPRI and DOE sought to provide a bridge from utility-grade turbine development programs under way to commercial purchases of the wind turbines. The TVP was developed to allow utilities to build and operate enough candidate turbines to gain statistically significant operating and maintenance data.

Calvert, S.; Goldman, P. [Department of Energy, Washington, DC (United States); DeMeo, E.; McGowin, C. [Electric Power Research Inst., Palo Alto, CA (United States); Smith, B.; Tromly, K. [National Renewable Energy Lab., Golden, CO (United States)

1997-01-01T23:59:59.000Z

254

Industrial Revenue Bond Program (District of Columbia)  

Broader source: Energy.gov [DOE]

The District provides below market bond financing to lower the costs of borrowing for qualified capital construction and renovation projects. The program is available to non-profits, institutions,...

255

Use of Thermal Energy Storage to Enhance the Recovery and Utilization of Industrial Waste Heat  

E-Print Network [OSTI]

The recovery and reuse of industrial waste heat may be limited if an energy source cannot be fully utilized in an otherwise available out of phase or unequal capacity end-use process. This paper summarizes the results of a technical and economic...

McChesney, H. R.; Bass, R. W.; Landerman, A. M.; Obee, T. N.; Sgamboti, C. T.

1982-01-01T23:59:59.000Z

256

Electric Utility Industrial DSM and M&V Program  

E-Print Network [OSTI]

the profile and increase awareness of employees on energy efficiency and conservation. Process Partners can access funds to create a Strategic Energy Management Plan (SEMP), implement an Energy Management Information System (EMIS) and institute a...

Lau, K. P. K.

2008-01-01T23:59:59.000Z

257

Fairmont Public Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit, municipally...

258

Wells Public Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit,...

259

Preston Public Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit,...

260

Litchfield Public Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA])is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit, municipally...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Mora Municipal Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit,...

262

Lake City Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit,...

263

Design for energy efficiency: Energy efficient industrialized housing research program. Progress report  

SciTech Connect (OSTI)

Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

1991-03-01T23:59:59.000Z

264

China's Energy Management System Program for Industry  

E-Print Network [OSTI]

Conference New Orleans, LA. May 20-23, 2014 | iipnetwork.org Waste Heat Recovery in Cement – Market Status 4 5 7 15 24 9 12 24 26 739 0 100 200 300 400 500 600 700 800 Rest of World Americas Europe Mid East Other Asia Pakistan Thailand Japan India China...MS Implementation guidance for Thermal Power – EnMS Implementation guidance for Coke – EnMS Implementation guidance Plate Coal Industry – M&V guidance on energy performance • 2015 – EnMS Implementation guidance for Paper – EnMS Implementation guidance...

Hedman, B.; Yu, Y.; Friedman, Z.; Taylor, R.

2014-01-01T23:59:59.000Z

265

The Role of Public Utility Commissions in Energy Efficiency Program Delivery  

Broader source: Energy.gov [DOE]

This presentation, given through the DOE's Technical Assitance Program (TAP), addresses the role of public utility commissions in energy efficiency program delivery. Presented on August 31, 2011.

266

Massachusetts state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the state of Massachusetts. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; the full text of relevant statutes and regulations.

None

1981-02-09T23:59:59.000Z

267

California state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the state of California. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; the full text of relevant statutes and regulations.

none,

1981-02-09T23:59:59.000Z

268

Pennsylvania state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and State levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Pennsylvania. It contains a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

269

Maryland State information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Handbook Series Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Maryland. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

270

Oregon state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Oregon. It contains a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

271

Oregon state information handbook formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administater, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Oregon. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

272

Iowa state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, By Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the state of Iowa. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; the full test of relevant statutes and regulations.

None

1981-02-09T23:59:59.000Z

273

Utility Goals for the Efficiency Resource: Impact of PUC Rulemaking Project No. 39674 on Future Programs  

E-Print Network [OSTI]

Utility Goals for the Efficiency Resource: Impact of PUC Rulemaking Project No. 39674 on Future Programs Amy Martin CATEE Conference October 10, 2012 Overview ? Frontier Associates ? EUMMOT ? Utility Program Overview and Results to Date... Pricing & Resource Planning ? Energy Efficiency & Renewable Energy Programs ? Market Research ? Regulatory Assistance ? Database Solutions ? EUMMOT Administrator Who is EUMMOT? Electric Utility Marketing Managers of Texas (EUMMOT...

Martin, A.

2012-01-01T23:59:59.000Z

274

Defense programs industrial partnerships at Los Alamos National Laboratory  

SciTech Connect (OSTI)

The US Department of Energy`s Defense Programs face unprecedented challenges of stewardship for an aging nuclear stockpile, cessation of nuclear testing, reduced federal budgets, and a smaller manufacturing complex. Partnerships with industry are essential in developing technology, modernizing the manufacturing complex, and maintaining the safety and reliability of the nation`s nuclear capability. The past decade of federal support for industrial partnerships has promoted benefits to US industrial competitiveness. Recent shifts in government policy have re-emphasized the importance of industrial partnerships in accomplishing agency missions. Nevertheless, abundant opportunities exist for dual-benefit, mission-driven partnerships between the national laboratories and industry. Experience at Los Alamos National Laboratory with this transition is presented.

Freese, K.B. [Los Alamos National Lab., NM (United States). Industrial Partnership Office

1996-10-01T23:59:59.000Z

275

Expanding the Industrial Assessment Center Program: Building an Industrial Efficiency Workforce  

E-Print Network [OSTI]

Expanding the Industrial Assessment Center Program: Building an Industrial Efficiency Workforce Daniel Trombley Engineering Associate R. Neal Elliott, Ph.D., P.E. Associate Director of Research American Council for an Energy... be underserved (or hard to serve geographically) by the CoE. The CoE would coordinate with other satellite centers to ensure regional needs are met. Satellite centers would be housed in universities and colleges with four year ABET 1 -accredited engineering...

Trombley, D.; Elliott, R. N.; Chittum, A.

276

CHP Modeling as a Tool for Electric Power Utilities to Understand Major Industrial Customers  

E-Print Network [OSTI]

for optimum rate design. REFERENCES 1. Kumana, J D and R Nath, "Demand Side Dispatching, Part 1 - A Novel Approach for Industrial Load Shaping Applications", IETC Proceedings (March 93) 2. R Nath, D A Cerget, and E T Henderson, "Demand Side... Dispatching, Part 2 - An Industrial Application", IETC Proceedings (March 93) 3. R Nath and J D Kumana, "NOx Dispatching in Plant Utility Systems using Existing Software Tools", IETC Proceedings (April 92) 4. R Nath, J D KUJIl3I13, and J F Holiday...

Kumana, J. D.; Alanis, F. J.; Swad, T.; Shah, J. V.

277

Description of the Formerly Utilized Sites Remedial Action Program  

SciTech Connect (OSTI)

The background and the results to date of the Department of Energy program to identify and evaluate the radiological conditions at sites formerly utilized by the Corps of Engineers' Manhattan Engineer District (MED) and the US Atomic Energy Commission (AEC) are summarized. The sites of concern were federally, privately, and institutionally owned and were used primarily for research, processing, and storage of uranium and thorium ores, concentrates, or residues. Some sites were subsequently released for other purposes without radiological restriction. Surveys have been conducted since 1974 to document radiological conditions at such sites. Based on radiological surveys, sites are identified in this document that require, or are projected to require, remedial action to remove potential restrictions on the use of the property due to the presence of residual low-level radioactive contamination. Specific recommendations for each site will result from more detailed environmental and engineering surveys to be conducted at those sites and, if necessary, an environmental impact assessment or environmental impact statement will be prepared. Section 3.0 describes the current standards and guidelines now being used to conduct remedial actions. Current authority of the US Department of Energy (DOE) to proceed with remedial actions and the new authority required are summarized. A plan to implement the Formerly Utilized Sites Remedial Action Program (FUSRAP) in accordance with the new authority is presented, including the objectives, scope, general approach, and a summary schedule. Key issues affecting schedule and cost are discussed.

Not Available

1980-09-01T23:59:59.000Z

278

Calculation of the degree of utilization of oxygen in the oxidation of bitumen under industrial conditions  

SciTech Connect (OSTI)

The degree of utilization of air oxygen plays an important role in bitumen production. This parameter depends firstly on the capacity of the compressor that could be reduced at a more complete utilization of oxygen; secondly, a high oxygen content of the waste gases can lead to explosions and coke formation. Besides this, the waste gases contain toxic substances at concentrations which are not permitted for discharge into the atmosphere. Thus, the possibility of calculating the oxygen content of waste gases on industrial installation was investigated. The authors have derived an equation which describes the oxygen content of the waste gases as a function of the temperature and depth of oxidation, the oxygen flow rate, and the height of the liquid phase, for a laboratory unit; it was taken as the basis for the transition to the industrial scale.

Marakaeva, L.A.; Bereznikov, A.V.; Rozental', D.A.

1988-09-10T23:59:59.000Z

279

Cogeneration for industrial and mixed-use parks. Volume 1. A handbook for utilities. Final report  

SciTech Connect (OSTI)

The purpose of this handbook is to assist utility personnel in identifying existing or planned mixed-use and industrial parks as potential cogeneration plant sites. This handbook describes a process for evaluating the potential of a given site for cogeneration. The process involves a set of screenings, based on selection criteria and some basic analyses, to identify sites which have the highest likelihood of supporting a successful cogeneration project. Also included in the handbook are worksheets and case studies.

Schiller, S.R.; Minicucci, D.D.; Tamaro, R.F.

1986-05-01T23:59:59.000Z

280

Federal government information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the Federal Government. It contains a summary of the organization and responsibilities of agencies within the executive branch of the Federal government which may be relevant to FUSRAP activities; a brief summary of relevant Federal statutes and regulations; a description of the structure of the US Congress, identification of the officers, relevant committees and committee chairmen; a description of the Federal legislative process; a summary of legislation enacted and considered in the recently-adjourned 96th Congress; a description of the Federal budgetary process; a summary of the Carter Administration's comprehensive radioactive waste management program; and excerpts from the text of relevant federal statutes and regulations.

Not Available

1980-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Meeting State Carbon Emission Requirements through Industrial Energy Efficiency: The Southern California Gas Company’s Industrial End User Program  

Broader source: Energy.gov [DOE]

This case study describes the Southern California Gas Company’s Industrial End User program, which helps large industrial customers increase energy efficiency and reduce energy use and greenhouse gas emissions.

282

Liberty Utilities (Electric) – Commercial Energy Efficiency Incentive Programs  

Broader source: Energy.gov [DOE]

'''Liberty Utilities has assumed National Grid's customers base in the state of New Hampshire. Customers should contact Liberty Utilities for questions regarding incentive availability.'''

283

Liberty Utilities (Electric) – Commercial New Construction Rebate Program (New Hampshire)  

Broader source: Energy.gov [DOE]

'''Liberty Utilities has assumed National Grid's customers base in the state of New Hampshire. Customers should contact Liberty Utilities for questions regarding incentive availability.'''

284

Liberty Utilities (Electric)- Residential Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

'''Liberty Utilities has assumed National Grid's customers base in the state of New Hampshire. Customers should contact Liberty Utilities for questions regarding incentive availability.'''

285

Regional secondary resource utilization parks: The industrial parks of the future  

SciTech Connect (OSTI)

Obstacles currently facing the solid waste recycling industry are often related to lack of public and investor confidence, issues of profitability and liability, and insufficient consumer identification with products made from recycled materials. Resolution of these issues may not be possible without major changes in the way the solid waste recycling business is structured. One potential solution takes the form of the secondary resource utilization park. The premise is simple: Provide a strategically located facility where a broad range of secondary resources are separated, refined or converted, and made into new products on the site. The secondary material resources would come from municipal solid waste, demolition waste, landscape trimmings, used tires, scrap metal, agricultural waste, food processing waste, and other non-hazardous forms. The park would consist of separation and conversion facilities, research and product standards laboratories, and industries that convert the materials into products and fuels. Energy conversion systems using some waste streams as fuel could be located at the park to supplement energy demands of the industrial operations. The strategic co-location of the resource providers and user industries would also minimize transportation costs and could provide a test case for an industrial ecology'' approach to sustainable economic development.

Kuusinen, T.L.; Beck, J.E.; Holter, G.M.

1992-11-01T23:59:59.000Z

286

Regional secondary resource utilization parks: The industrial parks of the future  

SciTech Connect (OSTI)

Obstacles currently facing the solid waste recycling industry are often related to lack of public and investor confidence, issues of profitability and liability, and insufficient consumer identification with products made from recycled materials. Resolution of these issues may not be possible without major changes in the way the solid waste recycling business is structured. One potential solution takes the form of the secondary resource utilization park. The premise is simple: Provide a strategically located facility where a broad range of secondary resources are separated, refined or converted, and made into new products on the site. The secondary material resources would come from municipal solid waste, demolition waste, landscape trimmings, used tires, scrap metal, agricultural waste, food processing waste, and other non-hazardous forms. The park would consist of separation and conversion facilities, research and product standards laboratories, and industries that convert the materials into products and fuels. Energy conversion systems using some waste streams as fuel could be located at the park to supplement energy demands of the industrial operations. The strategic co-location of the resource providers and user industries would also minimize transportation costs and could provide a test case for an ``industrial ecology`` approach to sustainable economic development.

Kuusinen, T.L.; Beck, J.E.; Holter, G.M.

1992-11-01T23:59:59.000Z

287

Missouri State information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Missouri. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature chairmen, and a summary of recent relevant legislative action; a description of the organization and structure of local governments affected by remedial action at the St. Louis area sites; a summary of relevant local ordinances and regulations; an identification of relevant public interest groups; a list of radio stations, television stations, and newspapers that provide public information to the St. Louis area or to Jefferson City; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

288

Improve Overall Plant Efficiency and Fuel Use, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet describes how the Industrial Technologies Program combined heat and power (CHP) tool can help identify energy savings in gas turbine-driven systems.

Not Available

2008-12-01T23:59:59.000Z

289

Partnering with Utilities Part 2- Advanced Topics for Local Governments in Creating Successful Partnerships with Utilities to Deliver Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

This presentation given through the DOE's Technical Assitance Program (TAP) is part two in the series Partnering with Utilities:Advanced Topics for Local Governments in Creating Successful Partnerships with Utilities to Deliver Energy Efficiency Programs.

290

Partnering with Utilities Part 2: Advanced Topics for Local Governments in Creating Successful Partnerships with Utilities to Deliver Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

This presentation; given through the DOE's Technical Assitance Program (TAP); is part two in the series; Partnering with Utilities:Advanced Topics for Local Governments in Creating Successful Partnerships with Utilities to Deliver Energy Efficiency Programs.

291

Advanced Utility Mercury-Sorbent Field-Testing Program  

SciTech Connect (OSTI)

This report summarizes the work conducted from September 1, 2003 through December 31, 2007 on the project entitled Advanced Utility Mercury-Sorbent Field-Testing Program. The project covers the testing at the Detroit Edison St. Clair Plant and the Duke Power Cliffside and Buck Stations. The St. Clair Plant used a blend of subbituminous and bituminous coal and controlled the particulate emissions by means of a cold-side ESP. The Duke Power Stations used bituminous coals and controlled their particulate emissions by means of hot-side ESPs. The testing at the Detroit Edison St. Clair Plant demonstrated that mercury sorbents could be used to achieve high mercury removal rates with low injection rates at facilities that burn subbituminous coal. A mercury removal rate of 94% was achieved at an injection rate of 3 lb/MMacf over the thirty day long-term test. Prior to this test, it was believed that the mercury in flue gas of this type would be the most difficult to capture. This is not the case. The testing at the two Duke Power Stations proved that carbon- based mercury sorbents can be used to control the mercury emissions from boilers with hot-side ESPs. It was known that plain PACs did not have any mercury capacity at elevated temperatures but that brominated B-PAC did. The mercury removal rate varies with the operation but it appears that mercury removal rates equal to or greater than 50% are achievable in facilities equipped with hot-side ESPs. As part of the program, both sorbent injection equipment and sorbent production equipment was acquired and operated. This equipment performed very well during this program. In addition, mercury instruments were acquired for this program. These instruments worked well in the flue gas at the St. Clair Plant but not as well in the flue gas at the Duke Power Stations. It is believed that the difference in the amount of oxidized mercury, more at Duke Power, was the difference in instrument performance. Much of the equipment was purchased used and all of the equipment has nearly reached the end of its useful service.

Ronald Landreth

2007-12-31T23:59:59.000Z

292

Curricular emphasis in Industrial Distribution programs and programs of similar theme  

E-Print Network [OSTI]

fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY August 2003 Major Subject: Educational Human Resource Development © 2003... (Member) Bryan R. Cole (Head of Department) August 2003 Major Subject: Educational Human Resource Development iii ABSTRACT Curricular Emphasis in Industrial Distribution Programs and Programs of Similar Theme. (August 2003) John...

Miller, John Edward

2004-09-30T23:59:59.000Z

293

City of Shasta Lake Electric Utility- PV Rebate Program  

Broader source: Energy.gov [DOE]

'''''Note: This program is currently not accepting applications. Check the program web site for information regarding future solicitations. '''''...

294

A New Scheme on Robust Observer Based Control Design for Nonlinear Interconnected Systems with Application to an Industrial Utility Boiler  

E-Print Network [OSTI]

with Application to an Industrial Utility Boiler Adarsha Swarnakar, Horacio Jose Marquez and Tongwen Chen Abstract. The controller design is evaluated on a natural circulation drum boiler, where the nonlinear model describes

Marquez, Horacio J.

295

Otter Tail Power Company- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Otter Tail Power Company Rebate Program offers rebates to qualifying commercial, industrial, and agricultural customers for the installation of high-efficiency equipment upgrades. See the program...

296

City of Palo Alto Utilities- Commercial Energy Efficiency Rebate Program (California)  

Broader source: Energy.gov [DOE]

City of Palo Alto Utilities, through the Commercial Advantage Program several separate offerings, provides incentives for commercial customers to replace old equipment with new, more efficient...

297

Partnering with Utilities and Other Program Administrators to Sustain-Grow Your Energy Efficiency Initiatives  

Broader source: Energy.gov [DOE]

This document contains the transcript for the Partnering with Utilities and Other Program Administrators to Sustain and Grow Your Energy Efficiency Initiatives webinar held on May 8, 2013.

298

Electric-utility DSM programs: 1990 data and forecasts to 2000  

SciTech Connect (OSTI)

In April 1992, the Energy Information Administration (EIA) released data on 1989 and 1990 electric-utility demand-site management (DMS) programs. These data represent a census of US utility DSM programs, with reports of utility expenditures, energy savings, and load reductions caused by these programs. In addition, EIA published utility estimates of the costs and effects of these programs from 1991 to 2000. These data provide the first comprehensive picture of what utilities are spending and accomplishing by utility, state, and region. This report presents, summarizes, and interprets the 1990 data and the utility forecasts of their DSM-program expenditures and impacts to the year 2000. Only utilities with annual sales greater than 120 GWh were required to report data on their DSM programs to EIA. Of the 1194 such utilities, 363 reported having a DSM program that year. These 363 electric utilities spent $1.2 billion on their DSM programs in 1990, up from $0.9 billion in 1989. Estimates of energy savings (17,100 GWh in 1990 and 14,800 GWh in 1989) and potential reductions in peak demand (24,400 MW in 1990 and about 19,400 MW in 1989) also showed substantial increases. Overall, utility DSM expenditures accounted for 0.7% of total US electric revenues, while the reductions in energy and demand accounted for 0.6% and 4.9% of their respective 1990 national totals. The investor-owned utilities accounted for 70 to 90% of the totals for DSM costs, energy savings, and demand reductions. The public utilities reported larger percentage reductions in peak demand and energy smaller percentage DSM expenditures. These averages hide tremendous variations across utilities. Utility forecasts of DSM expenditures and effects show substantial growth in both absolute and relative terms.

Hirst, E.

1992-06-01T23:59:59.000Z

299

Utility residential new construction programs: Going beyond the code. A report from the Database on Energy Efficiency Programs (DEEP) Project  

SciTech Connect (OSTI)

Based on an evaluation of 10 residential new construction programs, primarily sponsored by investor-owned utilities in the United States, we find that many of these programs are in dire straits and are in danger of being discontinued because current inclusion of only direct program effects leads to the conclusion that they are not cost-effective. We believe that the cost-effectiveness of residential new construction programs can be improved by: (1) promoting technologies and advanced building design practices that significantly exceed state and federal standards; (2) reducing program marketing costs and developing more effective marketing strategies; (3) recognizing the role of these programs in increasing compliance with existing state building codes; and (4) allowing utilities to obtain an ``energy-savings credit`` from utility regulators for program spillover (market transformation) impacts. Utilities can also leverage their resources in seizing these opportunities by forming strong and trusting partnerships with the building community and with local and state government.

Vine, E.

1995-08-01T23:59:59.000Z

300

City of Palo Alto Utilities- New Construction Commercial Rebate Program  

Broader source: Energy.gov [DOE]

The City of Palo Alto's "Business New Construction Rebate Program" provides financial incentives for commercial, municipal, and school buildings built to the program's energy efficiency standards....

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Riverside Public Utilities- Non-Residential PV Incentive Program  

Broader source: Energy.gov [DOE]

'''''Note: Funding for this program has been exhausted for the remainder of the fiscal year. The program is scheduled to reopen on July 1, 2014.'''''

302

Implementation of solar-reflective surfaces: Materials and utility programs  

SciTech Connect (OSTI)

This report focuses on implementation issues for using solar-reflective surfaces to cool urban heat islands, with specific examples for Sacramento, California. Advantages of solar-reflective surfaces for reducing energy use are: (1) they are cost-effective if albedo is increased during routine maintenance; (2) the energy savings coincide with peak demand for power; (3) there are positive effects on environmental quality; and (4) the white materials have a long service life. Important considerations when choosing materials for mitigating heat islands are identified as albedo, emissivity, durability, cost, pollution and appearance. There is a potential for increasing urban albedo in Sacramento by an additional 18%. Of residential roofs, we estimate that asphalt shingle and modified bitumen cover the largest area, and that built-up roofing and modified bitumen cover the largest area of commercial buildings. For all of these roof types, albedo may be increased at the time of re-roofing without any additional cost. When a roof is repaired, a solar-reflective roof coating may be applied to significantly increase albedo and extend the life of the root Although a coating may be cost-effective if applied to a new roof following installation or to an older roof following repair, it is not cost-effective if the coating is applied only to save energy. Solar-reflective pavement may be cost-effective if the albedo change is included in the routine resurfacing schedule. Cost-effective options for producing light-colored pavement may include: (1) asphalt concrete, if white aggregate is locally available; (2) concrete overlays; and (3) newly developed white binders and aggregate. Another option may be hot-rolled asphalt, with white chippings. Utilities could promote solar-reflective surfaces through advertisement, educational programs and cost-sharing of road resurfacing.

Bretz, S.; Akbari, H.; Rosenfeld, A.; Taha, H.

1992-06-01T23:59:59.000Z

303

Office of Industrial Technologies: Summary of program results  

SciTech Connect (OSTI)

Working in partnership with industry, the US Department of Energy`s (DOE`s) Office of Industrial Technologies (OIT) is helping reduce industrial energy use, emissions, and waste while boosting productivity. Operating within the Office of Energy Efficiency and Renewable Energy (EE), OIT conducts research, development, demonstration, and technology transfer efforts that are producing substantial, measurable benefits to industry. This document summarizes some of the impacts of OIT`s programs through 1997. OIT tracks energy savings as well as other benefits associated with the successfully commercialized technologies resulting from OIT-supported research partnerships. Specifically, a chart shows current and cumulative energy savings as well as cumulative reductions of various air pollutants including particulates, volatile organic compounds (VOCs), nitrogen oxides (NO{sub x}), sulfur oxides (SO{sub x}), and the greenhouse gas, carbon dioxide (CO{sub 2}). The bulk of the document consists of four appendices. Appendix 1 describes the technologies currently available commercially, along with their applications and benefits; Appendix 2 describes the OIT-supported emerging technologies that are likely to be commercialized within the next year or two; Appendix 3 describes OIT-sponsored technologies used in commercial applications in the past that are no longer tracked; and Appendix 4 describes the methodology used to assess and track OIT-supported technologies.

NONE

1999-01-01T23:59:59.000Z

304

Solar synthesis of advanced materials: A solar industrial program initiative  

SciTech Connect (OSTI)

This is an initiative for accelerating the use of solar energy in the advanced materials manufacturing industry in the United States. The initiative will be based on government-industry collaborations that will develop the technology and help US industry compete in the rapidly expanding global advanced materials marketplace. Breakthroughs in solar technology over the last 5 years have created exceptional new tools for developing advanced materials. Concentrated sunlight from solar furnaces can produce intensities that approach those on the surface of the sun and can generate temperatures well over 2000{degrees}C. Very thin layers of illuminated surfaces can be driven to remarkably high temperatures in a fraction of a second. Concentrated solar energy can be delivered over large areas, allowing for rapid processing and high production rates. By using this technology, researchers are transforming low-cost raw materials into high-performance products. Solar synthesis of advanced materials uses bulk materials and energy more efficiently, lowers processing costs, and reduces the need for strategic materials -- all with a technology that does not harm the environment. The Solar Industrial Program has built a unique, world class solar furnace at NREL to help meet the growing need for applied research in advanced materials. Many new advanced materials processes have been successfully demonstrated in this facility, including the following: Metalorganic deposition, ceramic powders, diamond-like carbon materials, rapid heat treating, and cladding (hard coating).

Lewandowski, A.

1992-06-01T23:59:59.000Z

305

Hercules Municipal Utility- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Hercules Municipal Utility provides financial incentives for its residential members to increase the energy efficiency of participating homes. Rebates are offered for a variety of home appliances...

306

Anoka Municipal Utility- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Anoka Municipal Utilities (AMU) offers incentives for residential customers to install energy-efficient appliances and light bulbs in eligible homes. Rebates are available for Energy Star qualified...

307

Truckee Donner Public Utility District- Energy Conservation Rebate Program  

Broader source: Energy.gov [DOE]

Truckee Donner Public Utility District (TDPUD) offers incentives for customers to improve the energy efficiency of homes and businesses. Participants must be a TDPUD electric customer (and water...

308

Lassen Municipal Utility District- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Lassen Municipal Utility District (LMUD) offers an incentive for residential customers who purchase and install efficient lighting, HVAC equipment and ENERGY STAR rated appliances for eligible...

309

River Falls Municipal Utilities- Business Energy Efficiency Rebate Program (Wisconsin)  

Broader source: Energy.gov [DOE]

River Falls Municipal Utility (RFMU) offers a variety of rebates to business customers for implementing energy efficient equipment upgrades. Rebates are available for commercial lighting, central...

310

City Utilities of Springfield- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

City Utilities of Springfield offers incentives for commercial customers to increase the efficiency of eligible facilities. Rebates are available for efficient lighting upgrades, controls and for...

311

Montana-Dakota Utilities- Commercial Energy Efficiency Incentive Program  

Broader source: Energy.gov [DOE]

Montana-Dakota Utilities (MDU) offers a variety of rebates to commercial customers for the purchase and installation of energy efficient lighting measures, air conditioning equipment, variable...

312

City of Lompoc Utilities- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

City of Lompoc Utilities offers rebates to commercial customers for the purchase and installation of energy efficiency lighting, clothes washers, dishwashers, replaced refrigerators, new...

313

Kissimmee Utility Authority- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Kissimmee Utility Authority (KUA) offers several rebates to commercial customers for energy efficiency improvements. Rebates are available for HVAC maintenance, heat pumps, duct leak repairs,...

314

Central Lincoln People's Utility District- Renewable Energy Incentive Program (Oregon)  

Broader source: Energy.gov [DOE]

Central Lincoln People's Utility District provides financial incentives for its commercial and residential customers to install photovoltaic (PV), solar water heating, wind, and hydro electric...

315

Clark Public Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Clark Public Utilities offers several energy incentives for residential customers to increase the energy efficiency of their homes. Rebates are offered for refrigerators, freezers, clothes washers,...

316

Marshall Municipal Utilities- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Marshall Municipal Utilities offers incentives to commercial customers which help cover the installation costs of energy efficient lighting, heating and cooling equipment, motors, variable...

317

Elk River Municipal Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

[http://www.elkriverutilities.com/index.php Elk River Municipal Utilities] provides rebates to their residential electric customers who purchase and install Energy Star rated appliances and HVAC...

318

Gainesville Regional Utilities- Business Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Gainesville Regional Utilities (GRU) offers an incentive to business customers for upgrading to energy efficient equipment at eligible facilities. Incentives are available for ductwork, insulation,...

319

Norwich Public Utilities (Electric)- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Norwich Public Utilities (NPU) provides residential customers with rebates on the ENERGY STAR-qualified appliances and energy efficient HVAC equipment. Eligible appliance purchases include...

320

Orlando Utilities Commission- Residential Solar Water Heater Rebate Program (Florida)  

Broader source: Energy.gov [DOE]

The Orlando Utilities Commission (OUC) offers residential electric customers a point-of-sale rebate of $1,000 for new solar water heating systems.

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Norwich Public Utilities (Gas)- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Norwich Public Utilities (NPU) provides residential natural gas customers rebates for upgrading to energy efficient equipment in eligible homes. NPU offers rebates of between $250 - $1050 for...

322

Orange and Rockland Utilities (Gas)- Residential Efficiency Program  

Broader source: Energy.gov [DOE]

Orange and Rockland Utilities provides rebates for residential customers purchasing energy efficient natural gas equipment. Rebates exist for furnaces, water boilers and controls, steam boilers,...

323

City Utilities of Springfield- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

City Utilities of Springfield Missouri provides incentives for residential customers to increase the efficiency of eligible homes. Rebates are available for programmable thermostats, insulation...

324

Anaheim Public Utilities- Residential Home Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Upon request, Anaheim Public Utilities will perform a free home efficiency inspection, in which they will recommend energy saving improvements, rebates and provide some free energy saving devices....

325

Costs and effects of electric-utility DSM programs: 1989--1997  

SciTech Connect (OSTI)

All US electric utilities are required to report to the Energy Information Administration data on their demand-side management (DSM) programs. These data provide a comprehensive view of utility DSM-program costs and effects (energy savings and load reductions) for 1989, 1990, 1991, and 1992 as well as projections for 1993 and 1997.

Hirst, E.

1994-06-01T23:59:59.000Z

326

Utility Partnership Webinar Series: Industrial Customer Perspectives on Utility Energy Efficiency Programs  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyTheTwo New12.'6/0.2Contract (UESC) is not an

327

Compliance problems of small utility systems with the Powerplant and Industrial Fuel Use Act of 1978: volume II - appendices  

SciTech Connect (OSTI)

A study of the problems of compliance with the Powerplant and Industrial Fuel Use Act of 1978 experienced by electric utility systems which have a total generating capacity of less than 2000 MW is presented. This volume presents the following appendices: (A) case studies (Farmington, New Mexico; Lamar, Colorado; Dover, Delaware; Wolverine Electric Cooperative, Michigan; Central Telephone and Utilities, Kansas; Sierra Pacific Power Company, Nevada; Vero Beach, Florida; Lubbock, Texas; Western Farmers Cooperative, Oklahoma; and West Texas Utilities Company, Texas); (B) contacts and responses to study; (C) joint action legislation chart; (D) Texas Municipal Power Agency case study; (E) existing generating units jointly owned with small utilities; (F) future generating units jointly owned with small utilities; (G) Federal Register Notice of April 17, 1980, and letter of inquiry to utilities; (H) small utility responses; and (I) Section 744, PIFUA. (WHK)

None

1981-01-01T23:59:59.000Z

328

Determination of ecologically vital groundwaters at selected sites in the Formerly Utilized Sites Remedial Action Program  

SciTech Connect (OSTI)

The US Department of Energy is classifying groundwaters at sites in its Formerly Utilized Sites Remedial Action Program (FUSRAP). Of particular concern is the potential presence of groundwaters that are highly vulnerable to contamination and that are either (1) irreplaceable sources of drinking water or (2) ecologically vital. Conditions at nine FUSRAP sites were evaluated to determine if ecologically vital groundwaters are present. The sites evaluated were Wayne Interim Storage Site, Maywood Interim Storage Site, and Middlesex Sampling Plant in New Jersey; Ashland 2 Site, Seaway Industrial Park, Colonie Interim storage Site, and Niagara Falls Storage Site in New York; and the St. Louis Airport Site and Hazelwood Interim Storage Site in Missouri. The analyses indicated that groundwaters are vulnerable to contamination at all but two of the sites -- the Ashland 2 and Seaway Industrial Park sites in New York. Groundwater discharge points were identified within a 2-mile radius (i.e., the classification review area) of all of the sites. No ecologically vital groundwater areas exist in the vicinities of any of the nine FUSRAP sites evaluated. 35 refs., 17 figs.

Vinikour, W.S.; Yin, S.C.L.

1989-08-01T23:59:59.000Z

329

Utility Solar Financing Programs (ACE, JCP&L, RECO)  

Broader source: Energy.gov [DOE]

Note: As of this writing there are no further solicitations scheduled under the current program. The summary below describes the program as it existed prior to its suspension and is included for...

330

The effects of utility DSM programs on electricity costs and prices  

SciTech Connect (OSTI)

More and more US utilities are running more and larger demand-side management (DSM) programs. Assessing the cost-effectiveness of these programs raises difficult questions for utilities and their regulators. Should these programs aim to minimize the total cost of providing electric-energy services or should they minimize the price of electricity This study offers quantitative estimates on the tradeoffs between total costs and electricity prices. This study uses a dynamic model to assess the effects of energy-efficiency programs on utility revenues, total resource costs, electricity prices, and electricity consumption for the period 1990 to 2010. These DSM programs are assessed under alternative scenarios. In these cases, fossil-fuel prices, load growth, the amount of excess capacity the utility has in 1990, planned retirements of power plants, the financial treatment of DSM programs, and the costs of energy- efficient programs vary. These analyses are conducted for three utilities: a base'' that is typical of US utilities; a surplus'' utility that has excess capacity, few planned retirements, and slow growth in fossil-fuel prices and incomes; and a deficit'' utility that has little excess capacity, many planned retirements, and rapid growth in fossil-fuel prices and incomes. 28 refs.

Hirst, E.

1991-11-01T23:59:59.000Z

331

The effects of utility DSM programs on electricity costs and prices  

SciTech Connect (OSTI)

More and more US utilities are running more and larger demand-side management (DSM) programs. Assessing the cost-effectiveness of these programs raises difficult questions for utilities and their regulators. Should these programs aim to minimize the total cost of providing electric-energy services or should they minimize the price of electricity? This study offers quantitative estimates on the tradeoffs between total costs and electricity prices. This study uses a dynamic model to assess the effects of energy-efficiency programs on utility revenues, total resource costs, electricity prices, and electricity consumption for the period 1990 to 2010. These DSM programs are assessed under alternative scenarios. In these cases, fossil-fuel prices, load growth, the amount of excess capacity the utility has in 1990, planned retirements of power plants, the financial treatment of DSM programs, and the costs of energy- efficient programs vary. These analyses are conducted for three utilities: a ``base`` that is typical of US utilities; a ``surplus`` utility that has excess capacity, few planned retirements, and slow growth in fossil-fuel prices and incomes; and a ``deficit`` utility that has little excess capacity, many planned retirements, and rapid growth in fossil-fuel prices and incomes. 28 refs.

Hirst, E.

1991-11-01T23:59:59.000Z

332

State Demand-Side Management Programs Funds are Exploding! How Industries Can Best Use These Programs to Maximize Their Benefits  

E-Print Network [OSTI]

Find out from an Industrial Program Manager that runs a successful state DSM/Energy Efficiency program for the industrial sector how to best find, use and benefit from these types of programs. The amount of money that states are investing in DSM...

Nicol, J.

2008-01-01T23:59:59.000Z

333

Clark Public Utilities- Residential Heat Pump Loan Program  

Broader source: Energy.gov [DOE]

Clark Public Utilities offers loans of up to $20,000 for air-source heat pumps and $30,000 for geothermal heat pumps. Loans will help customers cover the up-front cost of installing a highly...

334

Orlando Utilities Commission- Residential Solar Loan Program (Florida)  

Broader source: Energy.gov [DOE]

Orlando Utilities Commission (OUC), in cooperation with the Orlando Federal Credit Union (OFCU), provides its customers with low-interest loans for solar photovoltaic (PV) systems and solar water...

335

Springfield Utility Board- Super Good Cents Manufactured Homes Rebate Program  

Broader source: Energy.gov [DOE]

The Springfield Utility Board offers a $600 incentive for the purchase of a Super Good Cents Manufactured Home. Super Good Cents Manufactured Homes offer improve comfort and efficiency. The...

336

Shakopee Public Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Shakopee Public Utilities offers its residential customers rebates on a variety of energy-efficient appliances and equipment. Rebates are available for CFL and LED lighting, air-source and...

337

Kentucky Utilities Company- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Kentucky Utilities Company (KU) offers rebates to all commercial customers who pay a DSM charge on monthly bills. Rebates are available on lighting measures, sensors, air conditioners, heat pumps,...

338

Port Angeles Public Works and Utilities- Solar Energy Loan Program  

Broader source: Energy.gov [DOE]

The City of Port Angeles Public Works and Utilities offers a low-interest loan to its residential and commercial customers for certain renewable energy projects. The loan is available for...

339

Moreno Valley Electric Utility- Solar Electric Incentive Program  

Broader source: Energy.gov [DOE]

Moreno Valley Electric Utility provides rebates to its electric customers for the purchase of photovoltaic (PV) systems. System must be on the same premises as the customer to qualify. Systems 30...

340

Marshall Municipal Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

[http://www.marshallutilities.com/index.php Marshall Municipal Utilities (MMU)] offers a variety of incentives for its residential customers to install energy-efficient equipment in their homes. ...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

River Falls Municipal Utilities- Renewable Energy Finance Program  

Broader source: Energy.gov [DOE]

River Falls Municipal Utilities (RFMU) offers loans of $2,500 - $50,000 to its residential customers for the installation of photovoltaic (PV), solar thermal, geothermal, wind electric systems. The...

342

Lake City Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency (SMMPA) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit, municipally-owned member utilities...

343

Lake Worth Utilities- Residential Solar Water Heating Rebate Program  

Broader source: Energy.gov [DOE]

The City of Lake Worth Utilities (CLWU), in conjunction with Florida Municipal Power Agency, offers rebates to customers who purchase and install a solar water heating system for residential use. A...

344

Marshall Municipal Utilities- Solar Thermal Water Heater Rebate Program  

Broader source: Energy.gov [DOE]

Marshall Municipal Utilities (MMU) offers residential customers rebates for installing a ENERGY STAR Solar Thermal Water Heater. Rebates are based on the size of the system; MMU offers $20 per...

345

New Braunfels Utilities- Residential Solar Water Heater Rebate Program  

Broader source: Energy.gov [DOE]

New Braunfels Utilities offers a rebate for residential customers who purchase and install solar water heating systems on eligible homes. A rebate of the equivalent of $0.265 per kWh is available...

346

Cyber Security Testing and Training Programs for Industrial Control Systems  

SciTech Connect (OSTI)

Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

Daniel Noyes

2012-03-01T23:59:59.000Z

347

Plowshare Program - American Atomic Bomb Tests For Industrial Applications  

SciTech Connect (OSTI)

The United States Atomic Energy Commission (AEC) established the Plowshare Program as a research and development activity to explore the technical and economic feasibility of using nuclear explosives for industrial applications. The reasoning was that the relatively inexpensive energy available from nuclear explosions could prove useful for a wide variety of peaceful purposes. The Plowshare Program began in 1958 and continued through 1975. Between December 1961 and May 1973, the United States conducted 27 Plowshare nuclear explosive tests comprising 35 individual detonations. Conceptually, industrial applications resulting from the use of nuclear explosives could be divided into two broad categories: 1) large-scale excavation and quarrying, where the energy from the explosion was used to break up and/or move rock; and 2) underground engineering, where the energy released from deeply buried nuclear explosives increased the permeability and porosity of the rock by massive breaking and fracturing. Possible excavation applications included: canals, harbors, highway and railroad cuts through mountains, open pit mining, construction of dams, and other quarry and construction-related projects. Underground nuclear explosion applications included: stimulation of natural gas production, preparation of leachable ore bodies for in situ leaching, creation of underground zones of fractured oil shale for in situ retorting, and formation of underground natural gas and petroleum storage reservoirs.

None

2012-04-22T23:59:59.000Z

348

Medical surveillance and programs on industrial hygiene at RCRA facilities  

SciTech Connect (OSTI)

Some special areas where much progress in industrial hygiene and safety has been made in the past few years are; training, personal protective equipment, uniforms, personal monitoring, area monitoring, and medical surveillance. Before one can begin to construct programs for worker protection, some knowledge of potential exposures must be gained. The best place to start is the Waste Analysis Plan, and the list of wastes that a particular site is authorized to receive. Waste Codes are listed within a facility`s Part A and Part B permits. Actual facility receipt of wastes are well documented within Load Records and other documentation. A facility`s training program forms the heart of a health and safety program. Every TSD facility should have developed a matrix of job titles and required training. Every facility must also make a commitment to providing a wide range of personal protective equipment, including a wide array of disposables. Some facilities will benefit from the occasional use of the newer respirator quantitative fit-testing devices. All facilities are urged to rent or borrow this type of equipment periodically. Quantitative respirator fit-testers are capable of revealing important deficiencies in a respirator program. Providing uniforms is a newer means of protecting workers. The use of uniforms is an effective means for addressing the idea of carry-home-waste. The use of disposables including boots, must be integrated into a Uniform Program if the program is to be effective. In addition, employees must strictly understand that uniforms must not leave the facility at any time, including lunch time.

Murphy, T.E. [Ash Grove Cement Co., Overland Park, KS (United States)

1994-12-31T23:59:59.000Z

349

Electric-utility DSM-program costs and effects, 1991 to 2001  

SciTech Connect (OSTI)

For the past three years (1989, 1990, and 1991), all US electric utilities that sell more than 120 GWh/year have been required to report to the Energy Information Administration data on their demand-side management (DSM) programs. These data provide a rich and uniquely comprehensive picture of electric-utility DSM programs in the United States. Altogether, 890 utilities (of about 3250 in the United States) ran DSM programs in 1991; of these, 439 sold more than 120 GWh and reported details on their DSM programs. These 439 utilities represent more than 80% of total US electricity sales and revenues. Altogether, these utilities spent almost $1.8 billion on DSM programs in 1991, equal to 1.0% of total utility revenues that year. In return for these (and prior-year) expenditures, utility DSM programs cut potential peak demand by 26,700 MW (4.8% of the national total) and cut annual electricity use by 23,300 GWh (0.9% of the national total). These 1991 numbers represent substantial increases over the 1989 and 1990 numbers on utility DSM programs. Specifically, utility DSM expenditures doubled, energy savings increased by almost 50%, and demand reductions increased by one-third between 1989 and 1991. Utilities differed enormously in their DSM-program expenditures and effects. Almost 12% of the reporting utilities spent more than 2% of total revenues on DSM programs in 1991, while almost 60% spent less than 0.5% of revenues on DSM. Utility estimates of future DSM-program expenditures and benefits show continuing growth. By the year 2001, US utilities expect to spend 1.2% of revenues on DSM and to cut demand by 8.8% and annual sales by 2.7%. Here, too, expectations vary by region. Utilities in the West and Northwest plan to spend more than 2% of revenues on DSM that year, while utilities in the Mid-Atlantic, Midwest, Southwest, Central, and North Central regions plan to spend less than 1% of revenues on DSM.

Hirst, E.

1993-05-01T23:59:59.000Z

350

Cedar Falls Utilities- Commercial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

The CFU Commercial Energy Efficiency Rebate Program provides rebates for a variety of energy efficient improvements in commercial facilities. The amount of the rebate varies greatly by technology...

351

Anaheim Public Utilities- Small Business Energy Management Assistance Program  

Broader source: Energy.gov [DOE]

The Small Business Energy Management System Program provides participating customers with free electrical energy use evaluations, retrofit funding, and installation assistance. Anaheim Public...

352

TVA Partner Utilities- In-Home Energy Evaluation Program  

Broader source: Energy.gov [DOE]

The Tennessee Valley Authority (TVA) ''energy right'' In-Home Energy Evaluation Pilot Program encourages the installation of energy-efficiency improvements in existing single family dwellings. The...

353

Lewis County PUD- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

[http://www.lcpud.org/index.html Lewis County PUD] offers rebates for commercial and industrial lighting, as well as industrial process upgrades, on a case-by-case basis. Eligible industrial...

354

Gainesville Regional Utilities- Solar-Electric (PV) System Rebate Program  

Broader source: Energy.gov [DOE]

'''''NOTE: Application targets for fiscal year 2013 have been met for the GRU Solar PV Rebate Program. The next round of applications are scheduled to open on October 1, 2013 pending approval of...

355

City of Palo Alto Utilities- New Construction Residential Rebate Program  

Broader source: Energy.gov [DOE]

The City of Palo Alto encourages home builders in Palo Alto to build more efficient residences than is required by state and local codes and ordinances. To qualify for this program, new homes must...

356

City of Gridley Utilities- PV Buy Down Program  

Broader source: Energy.gov [DOE]

'''''Funding for this program is currently exhausted. The summary below describes incentives as they were in 2010 and 2011. Incentive levels for the next funding round are still unknown.'''''

357

Philadelphia Gas Works- Commercial and Industrial Equipment Rebate Program (Pennsylvania)  

Broader source: Energy.gov [DOE]

Philadelphia Gas Works' (PGW) Commercial and Industrial Equipment rebates are available to all PGW commercial and industrial customers installing high efficiency boilers or eligible commercial food...

358

River Falls Municipal Utilities- Non-Profit Energy Efficiency Rebate Program (Wisconsin)  

Broader source: Energy.gov [DOE]

River Falls Municipal Utility (RFMU) provides matching rebates to non-profit customers who participate and receive rebates through the Focus On Energy program. Incentives are available on a range...

359

Port Angeles Public Works and Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Port Angeles Public Works and Utilities offers a rebate program to encourage residential customers to increase the energy efficiency of their homes. The rebates apply to qualifying installations in...

360

City of Tallahassee Utilities- Low-Income Energy Efficiency Grant Programs  

Broader source: Energy.gov [DOE]

City of Tallahassee Utilities offers two different grants that encourage low-income residents to improve the energy efficiency of homes. Both programs require a free home energy audit to be...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Performance Assurance for Multi-Year Contracts Under the Utility Incentive Program  

SciTech Connect (OSTI)

This 4-page fact sheet provides guidance for federal energy and facility managers on participation in utility programs for the management of electricity demand, and energy and water conservation.

Not Available

2007-08-01T23:59:59.000Z

362

Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs  

SciTech Connect (OSTI)

Since the spring of 2009, billions of federal dollars have been allocated to state and local governments as grants for energy efficiency and renewable energy projects and programs. The scale of this American Reinvestment and Recovery Act (ARRA) funding, focused on 'shovel-ready' projects to create and retain jobs, is unprecedented. Thousands of newly funded players - cities, counties, states, and tribes - and thousands of programs and projects are entering the existing landscape of energy efficiency programs for the first time or expanding their reach. The nation's experience base with energy efficiency is growing enormously, fed by federal dollars and driven by broader objectives than saving energy alone. State and local officials made countless choices in developing portfolios of ARRA-funded energy efficiency programs and deciding how their programs would relate to existing efficiency programs funded by utility customers. Those choices are worth examining as bellwethers of a future world where there may be multiple program administrators and funding sources in many states. What are the opportunities and challenges of this new environment? What short- and long-term impacts will this large, infusion of funds have on utility customer-funded programs; for example, on infrastructure for delivering energy efficiency services or on customer willingness to invest in energy efficiency? To what extent has the attribution of energy savings been a critical issue, especially where administrators of utility customer-funded energy efficiency programs have performance or shareholder incentives? Do the new ARRA-funded energy efficiency programs provide insights on roles or activities that are particularly well-suited to state and local program administrators vs. administrators or implementers of utility customer-funded programs? The answers could have important implications for the future of U.S. energy efficiency. This report focuses on a selected set of ARRA-funded energy efficiency programs administered by state energy offices: the State Energy Program (SEP) formula grants, the portion of Energy Efficiency and Conservation Block Grant (EECBG) formula funds administered directly by states, and the State Energy Efficient Appliance Rebate Program (SEEARP). Since these ARRA programs devote significant monies to energy efficiency and serve similar markets as utility customer-funded programs, there are frequent interactions between programs. We exclude the DOE low-income weatherization program and EECBG funding awarded directly to the over 2,200 cities, counties and tribes from our study to keep its scope manageable. We summarize the energy efficiency program design and funding choices made by the 50 state energy offices, 5 territories and the District of Columbia. We then focus on the specific choices made in 12 case study states. These states were selected based on the level of utility customer program funding, diversity of program administrator models, and geographic diversity. Based on interviews with more than 80 energy efficiency actors in those 12 states, we draw observations about states strategies for use of Recovery Act funds. We examine interactions between ARRA programs and utility customer-funded energy efficiency programs in terms of program planning, program design and implementation, policy issues, and potential long-term impacts. We consider how the existing regulatory policy framework and energy efficiency programs in these 12 states may have impacted development of these selected ARRA programs. Finally, we summarize key trends and highlight issues that evaluators of these ARRA programs may want to examine in more depth in their process and impact evaluations.

Goldman, Charles A.; Stuart, Elizabeth; Hoffman, Ian; Fuller, Merrian C.; Billingsley, Megan A.

2011-02-25T23:59:59.000Z

363

Electric Utilities' Role in Industrial Competitiveness: Going Beyond the Energy Audit  

E-Print Network [OSTI]

and productivity and 1 profitability improvement measures are introduce and described. Figure 3 shows the inputs used in Industry Manual development. Information contained in an Industry Manual \\ typically includes: \\ ? introduction and definition..., March 24-25, 1993 INDUSTRY MANUAL Figure 3 Industry Manual Inputs ? typical aggregate breakdown of capital and operating cost elements ? unit operations comprising manufacturing routes and alternate technologies ? simplified block flow...

Jeffress, R. D.

364

Cost-Effectiveness: Implication for Bonneville and Utility Programs Council document 2007-23 August 2007  

E-Print Network [OSTI]

incentives paid by utilities are less than present value of the avoided cost of alternative electricity1 Cost-Effectiveness: Implication for Bonneville and Utility Programs Council document 2007 found to be cost effective if the electric system paid all the costs. Council plan conservation targets

365

Barron Electric Cooperative- Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Barron Electric Cooperative (BEC) offers the Customized Energy Incentive Program for their commercial, industrial, and agricultural members to save energy by replacing old equipment with more...

366

Otter Tail Power Company- Commercial and Industrial Energy Efficiency Grant Program  

Broader source: Energy.gov [DOE]

Otter Tail Power Company Grants for Conservation Program allows its commercial and industrial customers to submit energy-saving proposals and receive grants for their custom efficiency projects....

367

A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets  

SciTech Connect (OSTI)

Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

Weller, G.H.

2001-07-15T23:59:59.000Z

368

Energy efficiency programs and policies in the industrial sector in industrialized countries  

E-Print Network [OSTI]

energy efficiency. Among industries included are cement, pulp and paper and plasticenergy efficiency in industry. Achievements: Production standards have been set for the engineering, plastics,

Galitsky, Christina; Price, Lynn; Worrell, Ernst

2004-01-01T23:59:59.000Z

369

FORMERLY UTILIZED SITES REMEDIAL ACTION PROGRAM ELIMINATION REPORT  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$ EGcG ENERGY MEASUREMENTS;/:4,4 (;I c.CF INDUSTRIES,

370

Philadelphia Gas Works- Commercial and Industrial EnergySense Retrofit Program (Pennsylvania)  

Broader source: Energy.gov [DOE]

Philadelphia Gas Works' (PGW) Commercial and Industrial Retrofit Incentive Program is part of EnergySense, PGW’s portfolio of energy efficiency programs designed to help customers save energy and...

371

Comprehensive monitoring program for fossil fuel utility boilers  

SciTech Connect (OSTI)

Kentucky Utilities Company (KUCo) is an investor-owned electric utility serving customers in 78 Kentucky counties and through a subsidiary, Old Dominion Power Company, serves customers in five counties in southwestern Virginia. Over 99 percent of all electricity generated is from coal. KUCo has five coal-fired generating stations with a total generating capacity of 2,530,000 kilowatts. According to regulations adopted by the Kentucky Division of Air Pollution (DAP), each existing, indirect heat exchanger having a capacity factor greater than thirty percent is required to install, operate and maintain continuous opacity and sulfur dioxide monitoring equipment. Newer units already had continuous emission monitors (CEM's) and they were also required to monitor for nitrogen oxides. When the CEM retro-fit project was started in the spring of 1980, the operating status, as well as the manufacturer and model numbers of existing equipment, were identified. Approximately 80 percent of the existing equipment was manufactured by Lear Siegler, Inc. (LSI). Most of the LSI equipment was operable and it was determined that LSI equipment would be used for the retro-fit project. Existing equipment was renovated to include recent design changes and improvements and some equipment supplied by others was replaced.

Moffett, J.W.; Garcia, A.M.

1983-06-01T23:59:59.000Z

372

Florida state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with DOE, Office of Nuclear Waste Management, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the federal and state levels, the pertinent programs they administer, each affected state legislature, and current federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Florida. It contains a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

None

1981-02-27T23:59:59.000Z

373

Commercial and Industrial Conservation and Load Management Programs at New England Electric  

E-Print Network [OSTI]

COMMERCIAL AND INDUSTRIAL CONSERVAT~ON AND LOAD MANAGEMENT PROGRAMS AT NEW ENGLAND ELECTRIC PETER H. GIBSON Manager, Load Management and Conservation Services New England Power Service Company Westborough, Massachusetts ABSTRACT New... is directed mainly toward the commercial and industrial classes, which mske up 62% of sales. The overall program, called Partners In Energy Planning, includes a performance contracting or modified shared savings program, a lighting subsidy program, a...

Gibson, P. H.

374

Data and projections on US electric-utility DSM programs: 1989--1997  

SciTech Connect (OSTI)

All US electric utilities are required to report to the Energy Information Administration (EIA) data on their demand-side management (DSM) programs. These data provide a comprehensive view of utility DSM-program costs and effects (energy savings and load reductions) for 1989, 1990, 1991, and 1992 as well as projections for 1993 and 1997. For 1992, US utility DSM programs cost almost $2.4 billion, saved 31,800 GWh, and cut potential peak demand by 32,900 MW. Normalized by retail revenues, sales, and peak demand, utilities spent 1.3% of their revenues to achieve energy and demand reductions of 1.2 and 6.0%, respectively.

Hirst, E.

1994-12-01T23:59:59.000Z

375

Impact of Large Scale Energy Efficiency Programs On Consumer Tariffs and Utility Finances in India  

SciTech Connect (OSTI)

Large-scale EE programs would modestly increase tariffs but reduce consumers' electricity bills significantly. However, the primary benefit of EE programs is a significant reduction in power shortages, which might make these programs politically acceptable even if tariffs increase. To increase political support, utilities could pursue programs that would result in minimal tariff increases. This can be achieved in four ways: (a) focus only on low-cost programs (such as replacing electric water heaters with gas water heaters); (b) sell power conserved through the EE program to the market at a price higher than the cost of peak power purchase; (c) focus on programs where a partial utility subsidy of incremental capital cost might work and (d) increase the number of participant consumers by offering a basket of EE programs to fit all consumer subcategories and tariff tiers. Large scale EE programs can result in consistently negative cash flows and significantly erode the utility's overall profitability. In case the utility is facing shortages, the cash flow is very sensitive to the marginal tariff of the unmet demand. This will have an important bearing on the choice of EE programs in Indian states where low-paying rural and agricultural consumers form the majority of the unmet demand. These findings clearly call for a flexible, sustainable solution to the cash-flow management issue. One option is to include a mechanism like FAC in the utility incentive mechanism. Another sustainable solution might be to have the net program cost and revenue loss built into utility's revenue requirement and thus into consumer tariffs up front. However, the latter approach requires institutionalization of EE as a resource. The utility incentive mechanisms would be able to address the utility disincentive of forgone long-run return but have a minor impact on consumer benefits. Fundamentally, providing incentives for EE programs to make them comparable to supply-side investments is a way of moving the electricity sector toward a model focused on providing energy services rather than providing electricity.

Abhyankar, Nikit; Phadke, Amol

2011-01-20T23:59:59.000Z

376

Implementation of the Formerly Utilized Sites Remedial Action Program:  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartment of Energy MediaRequirementsto

377

Utility-Scale Financial Incentives and Programs Resources | Department of  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of EnergyProgram2-26The ConfederatedSolarusingEnergyofdescribesDepartment

378

Electric Utility Energy Efficiency Programs | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThisStatement Tuesday,DepartmentTheandElectricpresentation

379

Better Buildings Neighborhood Program Business Models Guide: Non-Utility  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: ScopeDepartment ofEnergyBeowawe7:forOFFICE 0Program

380

Energy Smart- Commercial and Industrial Energy Efficiency Rebate Program (20 Municipalities)  

Broader source: Energy.gov [DOE]

Franklin Energy Services has partnered with the Michigan Public Power Agency (MPPA), which is made up of 20 municipal utilities, to offer the Energy Smart Commercial and Industrial Energy...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Natural gas recovery, storage, and utilization SBIR program  

SciTech Connect (OSTI)

A Fossil Energy natural-gas topic has been a part of the DOE Small Business Innovation Research (SBIR) program since 1988. To date, 50 Phase SBIR natural-gas applications have been funded. Of these 50, 24 were successful in obtaining Phase II SBIR funding. The current Phase II natural-gas research projects awarded under the SBIR program and managed by METC are presented by award year. The presented information on these 2-year projects includes project title, awardee, and a project summary. The 1992 Phase II projects are: landfill gas recovery for vehicular natural gas and food grade carbon dioxide; brine disposal process for coalbed gas production; spontaneous natural as oxidative dimerization across mixed conducting ceramic membranes; low-cost offshore drilling system for natural gas hydrates; motorless directional drill for oil and gas wells; and development of a multiple fracture creation process for stimulation of horizontally drilled wells.The 1993 Phase II projects include: process for sweetening sour gas by direct thermolysis of hydrogen sulfide; remote leak survey capability for natural gas transport storage and distribution systems; reinterpretation of existing wellbore log data using neural-based patter recognition processes; and advanced liquid membrane system for natural gas purification.

Shoemaker, H.D.

1993-12-31T23:59:59.000Z

382

SSL Pricing and Efficacy Trend Analysis for Utility Program Planning  

SciTech Connect (OSTI)

An LED lamp or luminaire can generally be found that matches or exceeds the efficacy of benchmark technologies in a given product category, and LED products continue to expand into ever-higher lumen output niches. However, the price premium for LED continues to pose a barrier to adoption in many applications, in spite of expected savings from reduced energy use and maintenance. Other factors—such as dimmability and quality of light—can also present challenges. The appropriate type, timing, and magnitude of energy efficiency activities will vary from organization to organization based on local variables and the method of evaluation. A number of factors merit consideration when prioritizing activities for development. Category-specific projections for pricing and efficacy are provided herein to assist in efficiency program planning efforts.

Tuenge, Jason R.

2013-10-01T23:59:59.000Z

383

Improvements in Hanford TRU Program Utilizing Systems Modeling and Analyses  

SciTech Connect (OSTI)

Hanford's Transuranic (TRU) Program is responsible for certifying contact-handled (CH) TRU waste and shipping the certified waste to the Waste Isolation Pilot Plant (WIPP). Hanford's CH TRU waste includes material that is in retrievable storage as well as above ground storage, and newly generated waste. Certifying a typical container entails retrieving and then characterizing it (Non-Destructive Examination [NDE], Non-Destructive Assay [NDA], and Head Space Gas Sampling [HSG]), validating records (data review and reconciliation), and designating the container for a payload. The certified payload is then shipped to WIPP. Systems modeling and analysis techniques were applied to Hanford's TRU Program to help streamline the certification process and increase shipping rates. The modeling and analysis yields several benefits: - Maintains visibility on system performance and predicts downstream consequences of production issues. - Predicts future system performance with higher confidence, based on tracking past performance. - Applies speculation analyses to determine the impact of proposed changes (e.g., apparent shortage of feed should not be used as basis to reassign personnel if more feed is coming in the queue). - Positively identifies the appropriate queue for all containers (e.g., discovered several containers that were not actively being worked because they were in the wrong 'physical' location - method used previously for queuing up containers). - Identifies anomalies with the various data systems used to track inventory (e.g., dimensional differences for Standard Waste Boxes). A model of the TRU Program certification process was created using custom queries of the multiple databases for managing waste containers. The model was developed using a simplified process chart based on the expected path for a typical container. The process chart was augmented with the remediation path for containers that do not meet acceptance criteria for WIPP. Containers are sorted into queues based on their current status in the process. A container can be in only one queue at any given time. Existing data systems are queried to establish the quantity of containers in each queue on any given day. This sets the amount of feed available that is then modeled to be processed according to the daily production plans. The daily production plans were created by identifying the equipment necessary and the staff that performs each process step, and determining the expected production rate for each step. Production performance is monitored on a weekly basis with Project senior staff to establish a total operating efficiency (TOE) for each step (comparing actual performance to production capacity). The unit operations were modeled to be constrained by each day's feed queue plus the performance of the preceding step. The TOE for each unit operation was applied to an integrated model to determine bottlenecks and identify areas for improvement. All of the steps were linked to predict future system performance based on available feed and integrated system-level TOE. It has been determined that at times sub-optimization of a particular unit operation is necessary to ensure the system remains balanced (e.g., having excess capacity in assay does no good if there is no feed available because the real-time radiography [RTR] is working at half capacity). Several recommendations have been provided to the Project management team resulting in improvements in the performance of TRU certification activities by Hanford's TRU Program. (authors)

Baynes, P.A.; Bailey, K.B.; McKenney, D.E. [Fluor Hanford, Inc., Richland, WA (United States); Uytioco, E. [Fluor Government Group, Richland, WA (United States)

2008-07-01T23:59:59.000Z

384

Profile of the chemicals industry in California: Californiaindustries of the future program  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) Office of Industrial Technologies (OIT) established the Industries of the Future (IOF) program to increase energy efficiency, reduce waste production and to improve competitiveness, currently focusing on nine sectors. The IOF is a partnership strategy involving industry, the research community and the government, working together to identify technology needs, promote industrial partnerships and implement joint measures with all partners involved. The State Industries of the Future (SIOF) program delivers the accomplishments of the national Industries of the Future strategy to the local level, to expand the technology opportunities to a larger number of partners and reach smaller businesses and manufacturers that were not initially involved in the IOF effort. The state programs bring together industry, academia, and state agencies to address the important issues confronting industry in the state. These public-private coalitions facilitate industry solutions locally and enhance economic development. California has started a State Industries of the Future effort, in collaboration with the U.S. Department of Energy. The California Energy Commission (CEC) is leading the SIOF program in California, as part of many other programs to improve the energy efficiency and performance of industries in California. The California State IOF program aims to build a network of participants from industry, academia and government in four selected industrial sectors as a basis for the development of a strategic partnership for industrial energy efficient technology in the state. In California the IOF effort focuses petroleum refining, chemical processing, food processing and electronics. As part of this effort, the SIOF program will develop roadmaps for technology development for the selected sectors. On the basis of the roadmap, the program will develop successful projects with co-funding from state and federal government, and promote industry-specific energy-efficiency. An important element of the SIOF-program is the preparation of R&D roadmaps for each of the selected industries. The roadmap will help to identify priority needs for the participating industries to meet their energy challenges. The roadmap effort builds on the roadmaps developed by DOE, and on the conditions specific for the industry in California. Key to the successful preparation of a roadmap in the selected industries is the development of a profile of the industries. The profile provides a basis for the participants in the roadmap-effort, especially as the structure of the industries in California can be different than in the nation. The sector profiles describe the current economic and energy situation of these industries in California, the processes and energy uses, and the potential future developments in each industry. The profiles are an integral part of the roadmap, to help working group partners to evaluate the industry's R&D needs for their industry in California. In this report, we focus on the chemicals industry. The industry is an important economic factor in the state, providing over 82,300 jobs directly, and more in indirect employment. Value of shipments in 2001 was just under $25.7 Billion, or 6% of all manufacturing in California. There are over 1,500 chemical plants in California, of which 52% are pharmaceutical companies. Many companies operate chemical plants in California. The industry consumes 8% of the electricity and 5% of the natural gas in California. In this report, we start with a description of the chemical industry in the United States and California. This is followed by a discussion of the energy consumption and energy intensity of the Californian chemical industry. Chapter 3 focuses on the main sub-sectors. For each of the sub-sectors a general process description is provided in Chapter 4. Based on this analysis, in Chapter 5, we discuss potential technology developments that can contribute to further improving the energy efficiency in chemical plants, with a focus on the situation in California.

Galitsky, Christina; Worrell, Ernst

2004-06-01T23:59:59.000Z

385

Advanced Industrial Materials (AIM) Program: Compilation of project summaries and significant accomplishments, FY 1995  

SciTech Connect (OSTI)

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This report contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Subject areas covered are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

NONE

1996-04-01T23:59:59.000Z

386

Advanced Industrial Materials (AIM) Program Compilation of Project Summaries and Significant Accomplishments FY 1999  

SciTech Connect (OSTI)

For the past 10 years the Advanced Industrial Materials (AIM) has supported development of new and improved materials to enable U.S. industry to improve energy efficiency, increase productivity, and reduce waste. It has been a National Laboratory based program, with work currently under way at Oak Ridge National Laboratory, Los Alamos National Laboratory, and Sandia National Laboratories, in collaboration with industrial and university partners. With the advent of the Industries of the Future (IOF) strategy within the Office of Industrial Technologies (OIT) and the scheduled completion of the Continuous Fiber Ceramic Composites (CFCC) Program in FY 2002, an integrated materials program is being developed in OIT. So this represents the last summary of AIM research and development. The new program, Industrial Materials for the Future (IMF), will be competitive in operation, with solicitations for proposals for development of materials in accordance with the IOF Technology Roadmaps, followed by merit review and funding of the best proposals. Industry will take the lead in ''industry-specific'' research and development, in cooperation with National Laboratories, as needed. National Laboratories and universities will take the lead in maintaining a base technology program, for the purpose of maintaining a continuing flow of new materials technologies. The AIM and CFCC Programs will be replaced by the IMF program over a three year period, so that in FY 2004, all research and development will be in response to industry solicitations and Laboratory/university calls. The Program Manager believes that AIM has been an extremely successful program, thanks to the Laboratory investigators and their partners. For 10 years, the program has increased industrial participation from very little to nearly 100 percent. The CFCC Program, similarly, has been successful in advancing the knowledge of processing and property development in these materials, though much still can be done in advancing their uses in industry. It is hoped that the Industrial Materials for the Future Program will be equally successful, not only in solving industry's short-term, immediate needs, but also in maintaining a materials technology base that will lead to longer-range materials and processing developments. The projects summarized here will be carried to successful conclusions over the next 3 years and the current Laboratories in AIM and CFCC will be joined by other Laboratories, universities, and new industrial partners. The Program Manager expresses his profound appreciation for the very fine work done for OIT during the last 10 years.

Angelini, P

2000-08-08T23:59:59.000Z

387

ENERGY STAR&reg; Portfolio Manager and Utility Benchmarking Programs: Effectiveness as a Conduit to Utility Energy Efficiency Programs  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThisStatement ||MoreThis document gives an overview ofSTAR ®

388

Public Interest Energy Research (PIER) Program FINAL PROJECT REPORT California Energy Balance Update and Decomposition Analysis for the Industry and Building Sectors  

E-Print Network [OSTI]

Losses CHP, Commercial Power CHP, Electric Power CHP, Industrial Power Electric Generators, Utilities

de la Rue du Can, Stephane

2014-01-01T23:59:59.000Z

389

www.abb.com\\careers ABB is a leader in power and automation technologies that enables utility and industry customers to improve perfo r-  

E-Print Network [OSTI]

their production based on energy pricing. Project: Workforce Scheduling in the Utility Industry Your profile: You in research & development is a prerequisite for ABB's business success. Essential contributions grow out for Power. Industrial planning and scheduling problems Optimization of energy efficiency in industrial

Mannheim, Universität

390

User's guide to SERICPAC: A computer program for calculating electric-utility avoided costs rates  

SciTech Connect (OSTI)

SERICPAC is a computer program developed to calculate average avoided cost rates for decentralized power producers and cogenerators that sell electricity to electric utilities. SERICPAC works in tandem with SERICOST, a program to calculate avoided costs, and determines the appropriate rates for buying and selling of electricity from electric utilities to qualifying facilities (QF) as stipulated under Section 210 of PURA. SERICPAC contains simulation models for eight technologies including wind, hydro, biogas, and cogeneration. The simulations are converted in a diversified utility production which can be either gross production or net production, which accounts for an internal electricity usage by the QF. The program allows for adjustments to the production to be made for scheduled and forced outages. The final output of the model is a technology-specific average annual rate. The report contains a description of the technologies and the simulations as well as complete user's guide to SERICPAC.

Wirtshafter, R.; Abrash, M.; Koved, M.; Feldman, S.

1982-05-01T23:59:59.000Z

391

Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 2, Industrial liquid waste processing, industrial gaseous waste processing  

SciTech Connect (OSTI)

This two-volume proceedings summarize the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Individual reports are indexed separately.

Lee, V.E. [ed.; Watts, R.L.

1993-04-01T23:59:59.000Z

392

Advanced Industrial Materials (AIM) program. Compilation of project summaries and significant accomplishments FY 1996  

SciTech Connect (OSTI)

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven {open_quotes}Vision Industries{close_quotes} that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: (1) Aluminum; (2) Chemical; (3) Forest Products; (4) Glass; (5) Metal Casting; (6) Refineries; and (7) Steel. This report is a compilation of project summaries and significant accomplishments on materials.

NONE

1997-04-01T23:59:59.000Z

393

The Department of Energy`s Solar Industrial Program: 1995 review  

SciTech Connect (OSTI)

During 1995, the Department of Energy`s Solar Industrial (SI) Program worked to bring the benefits of solar energy to America`s industrial sector. Scientists and engineers within the program continued the basic research, applied engineering, and economic analyses that have been at the heart of the Program`s success since its inception in 1989. In 1995, all three of the SI Program`s primary areas of research and development--solar detoxification, advanced solar processes, and solar process heat--succeeded in increasing the contribution made by renewable and energy-efficient technologies to American industry`s sustainable energy future. The Solar Detoxification Program develops solar-based pollution control technologies for destroying hazardous environmental contaminants. The Advanced Solar Processes Program investigates industrial uses of highly concentrated solar energy. The Solar Process Heat Program conducts the investigations and analyses that help energy planners determine when solar heating technologies--like those that produce industrial-scale quantities of hot water, hot air, and steam--can be applied cost effectively. The remainder of this report highlights the research and development conducted within in each of these subprograms during 1995.

NONE

1996-04-01T23:59:59.000Z

394

Oncor Electric Delivery- Large Commercial and Industrial Rebate Program  

Broader source: Energy.gov [DOE]

Oncor provides incentives to service providers who install approved energy efficiency measures in commercial, industrial, and government sites. Service providers can include energy service...

395

Commercial and Industrial Energy Conservation Programs in Illinois  

E-Print Network [OSTI]

This paper presents the State of Illinois' evolving role in assisting commercial and industrial firms in identifying and improving inefficiencies in the use of energy....

Thomas, S. K.

1980-01-01T23:59:59.000Z

396

Financial Assistance to Industry Program (New Brunswick, Canada)  

Broader source: Energy.gov [DOE]

The purpose of the assistance is to provide adequate funding for capital expenditures and working capital to enable the establishment, expansion, or maintenance of eligible industries. The...

397

Progress Energy Carolinas- Commercial and Industrial Energy-Efficiency Program  

Broader source: Energy.gov [DOE]

Progress Energy provides rebates for energy efficiency measures in new construction or retrofits, as well as Technical Assistance for feasibility/energy studies to commercial, industrial and...

398

Dakota Electric Association- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Dakota Electric Association provides financial incentives for commercial and industrial customers to increase the energy efficiency of eligible facilities. Examples of equipment and measures...

399

Detroit Public Lighting Department- Commercial and Industrial Energy Wise Program  

Broader source: Energy.gov [DOE]

The Detroit Public Lighting Department (PLD) offers commercial and industrial customers rebates for energy efficient equipment. Specific rebate amounts, equipment requirements, and applications are...

400

Energy Efficiency Fund (Gas)- Commercial and Industrial Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

Through the Connecticut Energy Efficiency Fund, rebates are available for commercial, industrial or municipal customers of Connecticut Natural Gas Corporation, Southern Connecticut Gas Company, or...

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Laclede Gas Company- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Commercial and Industrial customers can receive rebates for various energy efficiency measures. Customers implementing specified efficiency measures can receive prescriptive rebates. All other...

402

Indiana Michigan Power- Commercial and Industrial Rebates Program  

Broader source: Energy.gov [DOE]

Indiana Michigan Power offers rebates for HVAC equipment, variable frequency drives, commercial refrigeration equipments, food service equipment and lighting measures for commercial and industrial...

403

Advanced Industrial Materials (AIM) Program: Compilation of project summaries and significant accomplishments, FY 1997  

SciTech Connect (OSTI)

The mission of the Advanced Industrial Materials (AIM) Program is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. A fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrates on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are the aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support. Assessments of materials needs and opportunities in the process industries are an on-going effort within the program. These assessments are being used for program planning and priority setting, followed by support of work to satisfy those needs. All the industries have identified materials as critical, particularly for high-temperature strength, corrosion resistance, and wear resistance. Also important from the energy efficiency viewpoint are membranes, catalytic membranes, and reactors for separations, both for processing and waste reduction. AIM focuses, therefore, on high-temperature materials, corrosion resistant materials, wear resistant materials, strong polymers, coatings, and membrane materials for industrial applications.

NONE

1998-05-01T23:59:59.000Z

404

A THERMODYNAMICS STUDY ON THE UTILIZATION OF JORDANIAN OIL SHALE IN CEMENT INDUSTRY  

E-Print Network [OSTI]

Oil shale can be utilized in manufacturing the Portland cement. In addition to the utilization of the spent oil shale after combustion, it can also reduce the required temperature for the clinkering reactions. A study on the Jordanian oil shale was performed to maximize the use of oil shale in the

Awni Y. Al-otoom

405

Industrial Rates and Demand-Side Management Programs  

E-Print Network [OSTI]

), Southwestern Public Service, Southwestern Electric Power, City of Austin, West Texas Utilities, EI Paso Electric, and Texas-New Mexico Power. Wholesale sales by major utilities included in "Others" category. Texas service areas only. Percentages based...,928,250 31.8% Texas Total 49,521 13,804 25.8% 93,847,494 36.9% wI Self-Gen 49,521 17,619 30.7% 119,841042 42.8% Note: Utilities are: TV Electric, Houston Lighting & Power, GulfStates Utilities, Central Power and Light, City Public Service (San Antonio...

Kasprowicz, L. M.; House, R.

406

EPUD- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Emerald People's Utility District (EPUD) offers financial incentives for commercial customers to increase the energy efficiency of their facilities. EPUD works with the Bonneville Power...

407

Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for Commercial Warm Air Furnaces, Notice of Proposed Rulemaking  

Broader source: Energy.gov [DOE]

Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for Commercial Warm Air Furnaces, Notice of Proposed Rulemaking

408

Utility/Industry Partnerships Involving Distributed Generation Technologies in Evolving Electricity Markets  

E-Print Network [OSTI]

in evolving electric markets and will review both current and emerging distributed generation technologies aimed at retail industrial, commercial and residential markets. This paper will draw upon several Electric Power Research Institute’s (EPRI) and member...

Rastler, D. M.

409

Graduate Programs in Industrial and Manufacturing Engineering The industrial and manufacturing (IME) department at WSU  

E-Print Network [OSTI]

systems, ergonomics/human factors, or manufacturing systems engineering. In order to be admitted to the Ph. Ergonomics/Human Factors. Emphases include industrial ergonomics; bio-mechanics; human-machine systems; occupational safety and other industrial hygiene issues; and ergonomics and human factors issues in aviation

410

Economic Impacts of Expanded Woody Biomass Utilization on the Bioenergy and Forest Products Industries in Florida  

E-Print Network [OSTI]

1 Economic Impacts of Expanded Woody Biomass Utilization on the Bioenergy and Forest Products as the starting point for implementation of the CGE model, which finds a solution where all markets

Florida, University of

411

The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs  

E-Print Network [OSTI]

Residential programs designed around directly influencing household habits and decision-making on energy consumption through quantitative or graphical feedback

Billingsley, Megan A.

2014-01-01T23:59:59.000Z

412

Cost-Effectiveness -Implication for Bonneville and Utility Programs The Council's 5th  

E-Print Network [OSTI]

value of the avoided cost of alternative electricity resources avoided by the measure. The remainder1 Cost-Effectiveness - Implication for Bonneville and Utility Programs Background The Council's 5th Plan conservation targets are comprised of measures that were found to be cost effective

413

The French National Energy Conservation Program - The Case of Industry  

E-Print Network [OSTI]

France is certainly one of the industrialized countries which has been the most severely affected by the energy crisis. It has thus been necessary since 1974 to plan and execute a bold, far-reaching government policy for energy reconversion...

Zyss, J.

1980-01-01T23:59:59.000Z

414

A Low Cost Energy Management Program at Engelhard Industries Division  

E-Print Network [OSTI]

in technology related to precious metals and nonmetallic minerals. It manufactures high-performance chemical and precious metals products, including catalysts for the petroleum and automotive industries. Engelhard's energy costs have risen dramatically over...

Brown, T. S.; Michalek, R.; Reiter, S.

1982-01-01T23:59:59.000Z

415

Grand Marais PUC- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency (SMMPA) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit, municipally-owned member utilities...

416

Comprehensive Approaches to Industrial Energy Efficiency: Examples from the Climate Wise Program  

E-Print Network [OSTI]

The Climate Wise Program is a partnership initiative sponsored by the U.S. EPA, with technical support from the U.S. DOE, with industry. It is designed to stimulate the voluntary reduction of greenhouse gas emissions among participating...

Milmoe, P. H.; Winkelman, S. R.; Asrael, J.

417

California’s Industrial Energy Efficiency Best Practices Technical Outreach and Training Program  

E-Print Network [OSTI]

This paper describes the California Energy Commission’s (Commission) energy policies and programs that save energy and money for California’s manufacturing and food processing industries to help retain businesses in-state and reduce greenhouse gases...

Kazama, D. B.; Wong, T.; Wang, J.

2007-01-01T23:59:59.000Z

418

Energy efficiency programs and policies in the industrial sector in industrialized countries  

E-Print Network [OSTI]

company and the Danish Energy Agency. The agreements, whichDanish Energy Authority [1] The Ministry of the Environment [2] and its Environmental Protection Agency [agencies 1. Voluntary Agreements with industry – Danish Energy

Galitsky, Christina; Price, Lynn; Worrell, Ernst

2004-01-01T23:59:59.000Z

419

Bringing you a prosperous future where energy is clean, abundant, reliable and affordable Industrial Technologies Program  

E-Print Network [OSTI]

Bringing you a prosperous future where energy is clean, abundant, reliable and affordable Industrial Technologies Program U.S. Department of Energy Office of Energy Efficiency and Renewable Energy for a comprehensive, physics- based model of dimensional changes and hot tearing. Hot Tear #12;Industrial Technologies

Beckermann, Christoph

420

A study of the educational outcomes of the teacher-in-industry program  

E-Print Network [OSTI]

OF SCIENCE December 1991 Major Subject: Educational Curriculum &, Instruction A STUDY OF THE EDUCATIONAL OUTCOMES OF THE TEACHER-IN-INDUSTRY PROGRAM A Thesis by TERI FLYNN METCALF Approved as to style and content by: Robert (Chair of James mmittee... difference in beliefs between the participant group and the reference group was found, suggesting that the Teacher-in-Industry Program had a positive impact on teacher beliefs about classroom methods, curriculum content and themselves...

Metcalf, Teri Flynn

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Utility DSM Programs from 1989 through 1998: Continuation or cross roads?  

SciTech Connect (OSTI)

Over the past five years, the Energy Information Administration (EIA) has been collecting data annually from U.S. electric utilities on their demand-side management (DSM) programs, both current and projected. The latest data cover activities for 1993 and projections for 1994 and 1998. In 1993, 991 utilities operated DSM programs. That year, they spent $2.8 billion, a 13% increase over 1992 expenditures. These and earlier DSM programs saved 44,000 GWh of energy and reduced potential peak demand by 40,000 MW, 30% and 22% increases over the 1992 values, respectively. While some people predict the demise of electric-utility DSM programs, the data do not paint so bleak a picture. In most parts of the country, DSM programs grew in 1993 and utilities (as of Spring 1994) projected continued growth through 1998. Expenditures grew from 1.3% of revenues in 1992 to 1.5% in 1993, and are expected to grow 2.5% per year faster than inflation, which is equivalent to revenue growth. Thus, DSM spending is expected to stay constant at 1.5% of revenues through 1998. Because of the cumulative effect of DSM programs, energy savings are expected to grow from 1.2% of sales in 1992 to 1.6% in 1993 and 3.0% in 1998. Potential-peak reductions are expected to increase from 5.9% of peak demand in 1992 to 6.8% in 1993 and 8.9% in 1998. However, the growth in spending is not as rapid as the 8% annual real growth projected a year earlier. Actual expenditures in 1993 were 6.5% lower than projected early that year. Energy savings, on the other hand, were the same as projected earlier. Potential peak reductions were actually 9% higher than previously projected.

Hadley, S.; Hirst, E.

1995-02-01T23:59:59.000Z

422

State Clean Energy Policies Analysis: State, Utility, and Municipal Loan Programs  

SciTech Connect (OSTI)

High initial costs can impede the deployment of clean energy technologies. Financing can reduce these costs. And, state, municipal, and utility-sponsored loan programs have emerged to fill the gap between clean energy technology financing needs and private sector lending. In general, public loan programs are more favorable to clean energy technologies than are those offered by traditional lending institutions; however, public loan programs address only the high up-front costs of clean energy systems, and the technology installed under these loan programs rarely supports clean energy production at levels that have a notable impact on the broader energy sector. This report discusses ways to increase the impact of these loan programs and suggests related policy design considerations.

Lantz, E.

2010-05-01T23:59:59.000Z

423

Impact of Industrial Electric Rate Structure on Load Management - A Utility Viewpoint  

E-Print Network [OSTI]

A few years ago our response to an inquiry regarding availability of electric service for a large industrial load was something like: 'Let us put this into our production model to determine whether we will have adequate generating capacity to commit...

Richardson, J. A.

1984-01-01T23:59:59.000Z

424

International Experience with Key Program Elements of IndustrialEnergy Efficiency or Greenhouse Gas Emissions Reduction Target-SettingPrograms  

SciTech Connect (OSTI)

Target-setting agreements, also known as voluntary ornegotiated agreements, have been used by a number of governments as amechanism for promoting energy efficiency within the industrial sector. Arecent survey of such target-setting agreement programs identified 23energy efficiency or GHG emissions reduction voluntary agreement programsin 18 countries. International best practice related to target-settingagreement programs calls for establishment of a coordinated set ofpolicies that provide strong economic incentives as well as technical andfinancial support to participating industries. The key program elementsof a target-setting program are the target-setting process,identification of energy-saving technologies and measures usingenergy-energy efficiency guidebooks and benchmarking as well as byconducting energy-efficiency audits, development of an energy-savingsaction plan, development and implementation of energy managementprotocols, development of incentives and supporting policies, monitoringprogress toward targets, and program evaluation. This report firstprovides a description of three key target-setting agreement programs andthen describes international experience with the key program elementsthat comprise such programs using information from the three keytarget-setting programs as well as from other international programsrelated to industrial energy efficiency or GHG emissionsreductions.

Price, Lynn; Galitsky, Christina; Kramer, Klaas Jan

2008-02-02T23:59:59.000Z

425

Industry  

E-Print Network [OSTI]

SHIP - Solar heat for industrial processes. Internationalsolar power could be used to provide process heat for

Bernstein, Lenny

2008-01-01T23:59:59.000Z

426

Peoples Gas- Commercial and Industrial Prescriptive Rebate Program  

Broader source: Energy.gov [DOE]

Peoples Gas offers the Chicagoland Natural Gas Savings Program to help non-residential customers purchase energy efficient equipment. Rebates are available on energy efficient furnaces, boilers,...

427

DTE Energy (Gas)- Commercial and Industrial Energy Efficiency Program  

Broader source: Energy.gov [DOE]

DTE Energy's Commercial Your Energy Savings Program provides prescriptive incentives, predominantly on a simple per unit basis. Custom incentives are based on the amount of estimated annual energy...

428

The Future of Combustion Turbine Technology for Industrial and Utility Power Generation  

E-Print Network [OSTI]

Low capital cost and ample low-cost natural gas supplies will make natural gas-fired combustion turbine systems the power generation technology of choice over the next decade. Against the background of earlier use by electric utilities, this paper...

Karp, A. D.; Simbeck, D. R.

429

The Public Utility and Industry: A Customer- Supplier Relationship for Long-Term Survival  

E-Print Network [OSTI]

. the basic concept "Thesewas oil and promote fuels such as coal and are the rates, this is what it costs. we nuclear power. have the power," said the public utility This in turn caused significant A new approach was needed by both capital expenditures...

Janson, J. R.

430

U.S. Department of Energy (DOE) Industrial Programs and Their Impacts  

E-Print Network [OSTI]

P.O. Box 999 Battelle Blvd. MS: K6-05 P.O. Box 999 Battelle Blvd. MS: K6-05 Richland, Washington 99352 Richland, Washington 99352 ABSTRACT The U.S. Department of Energy?s Industrial Technologies Program (ITP) has been working... in the nation's indus- trial sector far exceeds any other sector and is more diverse. In 2006, the industrial sector used 32.43 Figure 1. Industrial Energy Flows (Quad), 2006 ESL-IE-08-05-33 Proceedings from the Thirtieth Industrial Energy Technology...

Weakley, S. A.; Roop, J. M.

2008-01-01T23:59:59.000Z

431

Sponsors of CIEEDAC: Natural Resources Canada, Canadian Industry Program for Energy Conservation, Aluminium Industry Association, Canadian Petroleum Products Institute, Canadian Portland Cement Association, Canadian Pulp  

E-Print Network [OSTI]

of REGIONAL TRENDS IN INDUSTRIAL GREENHOUSE GAS EMISSIONS, 1990 - 1996 in Canada Prepared for EnvironmentSponsors of CIEEDAC: Natural Resources Canada, Canadian Industry Program for Energy Conservation. Not for Quotation GHG Emissions, 1990 - 1996 CIEEDAC i March, 2001 Analysis of Regional Trends in Industrial

432

Bringing you a prosperous future where energy is clean, abundant, reliable and affordable Industrial Technologies Program  

E-Print Network [OSTI]

Technologies Program A Strong Energy Portfolio for a Strong America Energy efficiency and clean, renewableBringing you a prosperous future where energy is clean, abundant, reliable and affordable Industrial Technologies Program U.S. Department of Energy Office of Energy Efficiency and Renewable Energy

Beckermann, Christoph

433

Energy Efficiency: Marketing and Service Potential for Energy Utilities' Industrial Markets  

E-Print Network [OSTI]

to serve a specific customer segment. Example companies: ? Kansas Gas Service (Kansas City & Wichita, KS) ? Public Service Gas &Electric (Newark, NJ) ? NW Natural (Portland, OR) ? Reliant Minnegasco (Minneapolis, MN) ? Oklahoma Natural Gas (Okla... information or links to other sites that do. A collaboration of New England based utilities have developed the GasNetworks website for both marketing and customer service purposes. Other examples: ? NW Natural (Portland, OR); ? Piedmont Natural Gas...

Russel, C.; Tate, R.; Tubiolo, A.

434

Neural network technology as a pollution prevention tool in the electric utility industry  

SciTech Connect (OSTI)

This paper documents efforts by the Lower Colorado River Authority (LCRA) to pilot test the use of neural network technology as a pollution prevention tool for reducing stack emissions from a natural gas-fired power generating facility. The project was funded in part by a grant from the US Environmental Protection Agency (EPA), Region VI. combustion control is quickly becoming an emerging alternative for reducing utility plant emissions without installing costly end of pipe controls. The LCRA estimates that the technology has the potential to improve the thermal efficiency of a large utility boiler by more than 1 percent. preliminary calculations indicate that a 1% improvement in thermal efficiency at the 430 MW gas-fired utility boiler could results in an estimated energy savings of 142, 140 mmBtus and carbon dioxide (CO{sub 2}) reductions of 8,774 tons per year. This paper describes the process that were undertaken to identify and implement the pilot project at LCRA's Thomas C. Ferguson Power Plant, located in Marble Falls, Texas, Activities performed and documented include lessons learned, equipment selection, data acquisition, model evaluation and projected emission reductions.

Johnson, M.L.

1998-07-01T23:59:59.000Z

435

ConEd (Electric)- Commercial and Industrial Energy Efficiency Program  

Broader source: Energy.gov [DOE]

Con Edison offers New York Commercial electric customers a rebate program for energy efficient equipment in buildings inside the eligible service area. All equipment must be installed by a...

436

Duke Energy (Electric)- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Duke Energy’s Smart $aver Incentive program offers rebates to non-residential customers to install energy efficient equipment in their facilities. All Duke Energy North Carolina nonresidential...

437

ConEd (Gas)- Commercial and Industrial Energy Efficiency Program  

Broader source: Energy.gov [DOE]

Con Edison offers New York Commercial natural gas customers a rebate program for energy efficient equipment in buildings inside the eligible service area. All equipment must be installed by a...

438

Con Edison Commercial and Industrial Energy Efficiency Program  

E-Print Network [OSTI]

? Con Edison C&I Energy Efficiency Team ? Program Management and Account Executives ? Lockheed Martin Team ? Marketing, Operations, Engineering and Administration ? Market Partner Network ? Con Edison Customers 6 C&I Program: Three Major..., energy consultants, and other suppliers of energy efficient equipment and services ? Market Partners assist Con Edison customers with applying for incentives, supporting their application process and providing solutions to energy problems...

Pospisil, D.

2011-01-01T23:59:59.000Z

439

Environmental Monitoring and the Gas Industry: Program Manager Handbook  

SciTech Connect (OSTI)

This document has been developed for the nontechnical gas industry manager who has the responsibility for the development of waste or potentially contaminated soil and groundwater data or must make decisions based on such data for the management or remediation of these materials. It explores the pse of common analytical chemistry instrumentation and associated techniques for identification of environmentally hazardous materials. Sufficient detail is given to familiarize the nontechnical reader with the principles behind the operation of each technique. The scope and realm of the techniques and their constituent variations are portrayed through a discussion of crucial details and, where appropriate, the depiction of real-life data. It is the author's intention to provide an easily understood handbook for gas industry management. Techniques which determine the presence, composition, and quantification of gas industry wastes are discussed. Greater focus is given to traditional techniques which have been the mainstay of modem analytical benchwork. However, with the continual advancement of instrumental principles and design, several techniques have been included which are likely to receive greater attention in fiture considerations for waste-related detection. Definitions and concepts inherent to a thorough understanding of the principles common to analytical chemistry are discussed. It is also crucial that gas industry managers understand the effects of the various actions which take place before, during, and after the actual sampling step. When a series of sample collection, storage, and transport activities occur, new or inexperienced project managers may overlook or misunderstand the importance of the sequence. Each step has an impact on the final results of the measurement process; errors in judgment or decision making can be costly. Specific techniques and methodologies for the collection, storage, and transport of environmental media samples are not described or discussed in detail in thk handbook. However, the underlying philosophy regarding the importance of proper collection, storage, and transport practices, as well as pertinent references, are presented.

Gregory D. Gillispie

1997-12-01T23:59:59.000Z

440

AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report  

SciTech Connect (OSTI)

The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listing of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.

Petersen, G.; Bair, K.; Ross, J. [eds.

1994-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Review of a State Industrial Efficiency Program: Texas Industries of the Future  

E-Print Network [OSTI]

Plan accomplishments; attendees at events; impacts of Best Practice trainings; and individual project outcomes. Since its inception, the program has organized 48 workshops, forums, roundtables and conferences, with a total of over 2,300 attendees...

Ferland, K.

2008-01-01T23:59:59.000Z

442

(Technical and engineering support for the Office of Industrial Programs)  

SciTech Connect (OSTI)

As of April 19, 1991, technical, operational and analytic support and assistance to the offices and divisions of the Office of Renewable Energy, under contract DE-AC01-86CE30844 was completed. The overall work effort, initiated February 20, 1986, was characterized by timely, comprehensive, high quality, professional responsiveness to a broad range of renewable energy program operational support requirements. These are no instances of failure to respond, nor unacceptable response, during the five-year period. The technology program areas covered are Solar Buildings Technology, Wind Energy Technology, Photovoltaic Energy Technology, Geothermal Energy Technology, Biofuels and Municipal Waste Technology, Solar Thermal Technology, Hydropower Energy Technology, Ocean Energy Technology, and Electric Energy Systems and Energy Storage. The analytical and managerial support provided to the office and staff of the Deputy Assistant Secretary for Renewable Energy enabled a comprehensive evaluation of program and policy alternatives, and the selection and execution of appropriate courses of action from amongst those alternatives. Largely through these means the Office has been able to maintain continuity and a meaningful program thrust through the vacillations of policies and budgets that it has experienced over that it has experienced over the past five years. Appended are summaries of support activities within each of the individual technology program areas, as well as a complete listing of all project deliverables and due-dates for each submittal under the contract.

Not Available

1991-01-01T23:59:59.000Z

443

An Energy Conservation Program in the Food Industry  

E-Print Network [OSTI]

Conser vation Program and their annual energy consumption ranges from 10,000 MBTU's to 1,800,000 MBTU's. Because of these differences in product lines and size, each facility has a unique energy con sumption pattern and needs a unique approach...~ra? tion. These standards must be translated into the plant's cost accounting and control sy~tem. Energy cost control is a primary objectivejof the program. I Energy control equipment, procedures and a4tion plans for maintaining energy usage within...

Farner, C. T.

444

UMCP-BG and E collaboration in nuclear power engineering in the framework of DOE-Utility Nuclear Power Engineering Education Matching Grant Program  

SciTech Connect (OSTI)

The DOE-Utility Nuclear Power Engineering Education Matching Grant Program has been established to support the education of students in Nuclear Engineering Programs to maintain a knowledgeable workforce in the United States in order to keep nuclear power as a viable component in a mix of energy sources for the country. The involvement of the utility industry ensures that this grant program satisfies the needs and requirements of local nuclear energy producers and at the same time establishes a strong linkage between education and day-to-day nuclear power generation. As of 1997, seventeen pairs of university-utility partners existed. UMCP was never a member of that group of universities, but applied for the first time with a proposal to Baltimore Gas and Electric Company in January 1999 [1]. This proposal was generously granted by BG&E [2,3] in the form of a gift in the amount of $25,000 from BG&E's Corporate Contribution Program. Upon the arrival of a newly appointed Director of Administration in the Department of Materials and Nuclear Engineering, the BG&E check was deposited into the University's Maryland Foundation Fund. The receipt of the letter and the check enabled UMCP to apply for DOE's matching funds in the same amount by a proposal.

Wolfe, Lothar PhD

2000-03-01T23:59:59.000Z

445

Industrial Energy Efficiency: Designing Effective State Programs for the Industrial Sector  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy Health andofIan Kalin About UsIndustrial Energy Efficiency AssessmentsJobs

446

Industrial Energy Efficiency: Designing Effective State Programs for the Industrial Sector: Executive Summary  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy Health andofIan Kalin About UsIndustrial Energy Efficiency

447

Research and development separation technology: The DOE Industrial Energy Conservation Program  

SciTech Connect (OSTI)

This brochure summarizes the Office of Industrial Programs' RandD efforts in the advancement of separation technology. The purpose of this brochure is to provide interested parties with information on federal industrial energy conservation activities in separation technology. The brochure is comprised of the following sections: Separation Technology, summarizes the current state of separation technology and its uses. Potential Energy Savings, discusses the potential for industrial energy conservation through the implementation of advanced separation processes. Office of Industrial Programs' RandD Efforts in Separation Technology Development, describes the separation RandD projects conducted by IP. RandD Data Base, lists contractor, principal investigator, and location of each separation-related RandD effort sponsored by IP.

Not Available

1987-07-01T23:59:59.000Z

448

Using Java for Real-Time Critical Industrial Robot Programming Andreas Schierl, Andreas Angerer, Alwin Hoffmann, Michael Vistein and Wolfgang Reif  

E-Print Network [OSTI]

Using Java for Real-Time Critical Industrial Robot Programming Andreas Schierl, Andreas Angerer, Alwin Hoffmann, Michael Vistein and Wolfgang Reif I. VISION Industrial robotics is characterized programming languages. Additionally, to become an acceptable replacement in industrial applications

Reif, Wolfgang

449

DOE Hydrogen and Fuel Cells Program Record, Record # 13008: Industry  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdf MoreProgram |DOE Exercises OptionDOE Hydrogen and Fuel

450

Electricity Industry Leaders U.S. Utilities, Grid Operators, Others Come Together  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThisStatementNOT

451

Determination of elements for Industrial Hygiene and Safety Engineering programs at the Masters level  

E-Print Network [OSTI]

&M Industrial Hygiene and Safety Engineering graduate programs. Seventy-three percent of this sample population responded and provided demographic informanon, course evaluations, and topic preferences for short course education. Task/activity responses were... hygienists or safety personnel (1). Saltzman emphasized that industrial hygienists and safety personnel must be evaluated on what their job responsibilities are and on what degrees of protection they are able to provide the workers (2). The American...

Duke, James Edward

1992-01-01T23:59:59.000Z

452

Advanced sensor development program for the pulp and paper industry  

SciTech Connect (OSTI)

This report describes experimental and theoretical studies toward development of a remote sensing technique for non-intrusive temperature measurement based on optical spectroscopic analysis of recovery boiler. The overall objectives were (a) construction of a fiber-optic system for measurement of spectroscopic emission intensities at several wavelengths and (b) development of a computer program relating these intensities to temperatures of the emitting species. The emitting species for temperature measurements in flames can be either naturally occurring free radicals (OH, CH, C{sub 2}) or atoms which, in turn, can be either naturally occurring or seeded into flames. Sodium atoms, the obvious emitters in recovery boilers, are not promising as thermometric species because of their high concentration. At high concentrations, strong self-absorption results cause optical depths to be much smaller than the sampling depths desired for recovery boilers. An experimental program was, therefore, undertaken with the objective of identification and spectroscopic detection and measurement of other naturally occurring thermometric species. The program consisted of several laboratory studies and four field trips to different recovery boilers. 19 refs., 43 figs., 8 tabs.

Allen, J.D.; Charagundla, S.R.; Macek, A.; Semerjian, H.G.; Whetstone, J.R.

1990-10-01T23:59:59.000Z

453

Energy Efficiency Programs for Small and Medium Sized Industry  

E-Print Network [OSTI]

.47 0.60 0.73 0.39 16.59 Lumber SIC 24 2.66 2.29 2.9 2.46 7.55 Furniture SIC 25 1.18 1.28 1.20 0.96 18.33 Paper SIC 26 10.84 9.94 12.56 11.91 -9.88 Printing and 0.62 0.73 0.77 0.76 -21.44 Publishing SIC 27 Chemicals SIC 28 9.99 9.51 9.69 10.44 -4....79 0.87 6.16 Related Products SIC 38 Misc. Manufacturing 1.08 1.10 0.93 1.17 -8.10 SIC39 50 ESL-IE-01-05-08 Proceedings from the Twenty-third National Industrial Energy Technology Conference, Houston, TX, May 1-4, 2001 Energy Intensity (Thousand...

Shipley, A. M.; Elliott, R. N.

454

Promoting emerging energy-efficiency technologies and practices by utilities in a restructured energy industry: A report from California  

SciTech Connect (OSTI)

The potential energy savings from emerging technologies (i.e., those technologies emerging from research and development) represent a significant resource to California and the US This paper describes how California's investor-owned utilities (IOUs) have been promoting emerging technologies over the last three years to increase energy efficiency in the buildings sector. During these years, the IOUs have experienced significant changes in their regulatory environment as part of the restructuring of the energy industry in California. These regulatory changes have impacted the way emerging technologies are treated by the regulatory community and the IOUs. After reviewing these changes, the paper concludes by discussing potential opportunities to improve the market penetration of emerging technologies.

Vine, Edward L.

2000-07-01T23:59:59.000Z

455

Industry  

E-Print Network [OSTI]

of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

Bernstein, Lenny

2008-01-01T23:59:59.000Z

456

Overview of the Duke University Bass Connections Program in Industrial Energy Efficiency  

E-Print Network [OSTI]

Overview of the Duke University Bass Connections Program in Industrial Energy Efficiency Gale Boyd, Duke University Presented to the IETC May 21st, 2014 New Orleans, LA ESL-IE-14-05-03 Proceedings of the Thrity-Sixth Industrial Energy Technology... related to the economy, the environment, and security. ESL-IE-14-05-03 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 AY13-14 Project Team List ? The University as an Energy Laboratory: Design...

Boyd, G.

2014-01-01T23:59:59.000Z

457

Commercial and Industrial DSM Program Overview | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Codesthe NaturalCommercial Building1ProgramCommercial

458

Implementing an Industrial Energy Efficiency Program in Minnesota |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartment of EnergyDepartment of Energy Map

459

Industrial Energy Efficiency: Designing Effective State Programs for the  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartment ofTheDepartment of2012PathwaysJobs | Department

460

AEP SWEPCO - Commercial and Industrial Energy Efficiency Rebate Programs |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' ResearchThe Office of FossilMembership |92011PolicyDepartment(Ohio) |MaximumProgram

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Re-utilization of Industrial CO2 for Algae Production Using a Phase Change Material  

SciTech Connect (OSTI)

This is the final report of a 36-month Phase II cooperative agreement. Under this project, Touchstone Research Laboratory (Touchstone) investigated the merits of incorporating a Phase Change Material (PCM) into an open-pond algae production system that can capture and re-use the CO2 from a coal-fired flue gas source located in Wooster, OH. The primary objective of the project was to design, construct, and operate a series of open algae ponds that accept a slipstream of flue gas from a coal-fired source and convert a significant portion of the CO2 to liquid biofuels, electricity, and specialty products, while demonstrating the merits of the PCM technology. Construction of the pilot facility and shakedown of the facility in Wooster, OH, was completed during the first two years, and the focus of the last year was on operations and the cultivation of algae. During this Phase II effort a large-scale algae concentration unit from OpenAlgae was installed and utilized to continuously harvest algae from indoor raceways. An Algae Lysing Unit and Oil Recovery Unit were also received and installed. Initial parameters for lysing nanochloropsis were tested. Conditions were established that showed the lysing operation was effective at killing the algae cells. Continuous harvesting activities yielded over 200 kg algae dry weight for Ponds 1, 2 and 4. Studies were conducted to determine the effect of anaerobic digestion effluent as a nutrient source and the resulting lipid productivity of the algae. Lipid content and total fatty acids were unaffected by culture system and nutrient source, indicating that open raceway ponds fed diluted anaerobic digestion effluent can obtain similar lipid productivities to open raceway ponds using commercial nutrients. Data were also collected with respect to the performance of the PCM material on the pilot-scale raceway ponds. Parameters such as evaporative water loss, temperature differences, and growth/productivity were tracked. The pond with the PCM material was consistently 2 to 5°C warmer than the control pond. This difference did not seem to increase significantly over time. During phase transitions for the PCM, the magnitude of the difference between the daily minimum and maximum temperatures decreased, resulting in smaller daily temperature fluctuations. A thin layer of PCM material reduced overall water loss by 74% and consistently provided algae densities that were 80% greater than the control pond.

Joseph, Brian

2013-12-31T23:59:59.000Z

462

Geothermal Program Review XVII: proceedings. Building on 25 years of Geothermal Partnership with Industry  

SciTech Connect (OSTI)

The US Department of Energy's Office (DOE) of Geothermal Technologies conducted its annual Program Review XVII in Berkeley, California, on May 18--20, 1999. The theme this year was "Building on 25 Years of Geothermal Partnership with Industry". In 1974, Congress enacted Public Law 93-410 which sanctioned the Geothermal Energy Coordination and Management Project, the Federal Government's initial partnering with the US geothermal industry. The annual program review provides a forum to foster this federal partnership with the US geothermal industry through the presentation of DOE-funded research papers from leaders in the field, speakers who are prominent in the industry, topical panel discussions and workshops, planning sessions, and the opportunity to exchange ideas. Speakers and researchers from both industry and DOE presented an annual update on research in progress, discussed changes in the environment and deregulated energy market, and exchanged ideas to refine the DOE Strategic Plan for research and development of geothermal resources in the new century. A panel discussion on Climate Change and environmental issues and regulations provided insight into the opportunities and challenges that geothermal project developers encounter. This year, a pilot peer review process was integrated with the program review. A team of geothermal industry experts were asked to evaluate the research in progress that was presented. The evaluation was based on the Government Performance and Results Act (GPRA) criteria and the goals and objectives of the Geothermal Program as set forth in the Strategic Plan. Despite the short timeframe and cursory guidance provided to both the principle investigators and the peer reviewers, the pilot process was successful. Based on post review comments by both presenters and reviewers, the process will be refined for next year's program review.

NONE

1999-10-01T23:59:59.000Z

463

Driving the Nation Toward a Clean Energy Future: Fuels Utilization Program Fact Sheet  

SciTech Connect (OSTI)

The transportation market in the United States is evolving. As the number of vehicles and miles traveled on American roadways continues to grow, the nation is looking toward advanced vehicles and fuels to meet the increasing demand for more energy efficient, environmentally friendly modes of transport. At the National Renewable Energy Laboratory, the Center for Transportation Technologies and Systems' Fuel Utilization Program is doing its part. We're developing and demonstrating engine and fuel technologies that allow alternative and advanced petroleum fuels to compete with their conventional counterparts.

Thomas, J.

2000-12-12T23:59:59.000Z

464

New York state information handbook formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying our the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of New York. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

None

1980-12-31T23:59:59.000Z

465

New Mexico state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of New Mexico. It contains a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

2014-12-31T23:59:59.000Z

466

Industry  

E-Print Network [OSTI]

options for combined heat and power in Canada. Office ofpolicies to promote combined heat and power in US industry.with fuel inputs in combined heat and power plants being

Bernstein, Lenny

2008-01-01T23:59:59.000Z

467

Industry  

E-Print Network [OSTI]

EJ of primary energy, 40% of the global total of 227 EJ. Bytotal energy use by industry and on the fraction of electricity use consumed by motor driven systems was taken as representative of global

Bernstein, Lenny

2008-01-01T23:59:59.000Z

468

US Department of Energy`s continuous fiber ceramic composite program - components for industrial use  

SciTech Connect (OSTI)

U.S. industry has a critical need for materials that are light, strong, corrosion resistant, and capable of performing in high temperature environments. The U.S. Department of Energy`s Continuous Fiber Ceramic Composite (CFCC) Program is addressing this critical industrial need. Although many traditional ceramics perform well at high temperature, they typically fail in a catastrophic manner in industrial service. CFCCs are the solution to this problem. A CFCC is made by placing a ceramic matrix around reinforcing continuous fibers that have been placed or woven into a preform. The resulting CFCC is a high temperature resistant material that exhibits tough behavior with better in-service reliability. Various CFCC components and sub-elements are being fabricated and tested in simulated and/or actual service environments during Phase II of this program.

Jonkouski, J. [Chicago Operations Office, Argonne, IL (United States)

1997-12-31T23:59:59.000Z

469

Advanced industrial gas turbine technology readiness demonstration program. Phase II. Final report: compressor rig fabrication assembly and test  

SciTech Connect (OSTI)

The results of a component technology demonstration program to fabricate, assemble and test an advanced axial/centrifugal compressor are presented. This work was conducted to demonstrate the utilization of advanced aircraft gas turbine cooling and high pressure compressor technology to improve the performance and reliability of future industrial gas turbines. Specific objectives of the compressor component testing were to demonstrate 18:1 pressure ratio on a single spool at 90% polytropic efficiency with 80% fewer airfoils as compared to current industrial gas turbine compressors. The compressor design configuration utilizes low aspect ratio/highly-loaded axial compressor blading combined with a centrifugal backend stage to achieve the 18:1 design pressure ratio in only 7 stages and 281 axial compressor airfoils. Initial testing of the compressor test rig was conducted with a vaneless centrifugal stage diffuser to allow documentation of the axial compressor performance. Peak design speed axial compressor performance demonstrated was 91.8% polytropic efficiency at 6.5:1 pressure ratio. Subsequent documentation of the combined axial/centrifugal performance with a centrifugal stage pipe diffuser resulted in the demonstration of 91.5% polytropic efficiency and 14% stall margin at the 18:1 overall compressor design pressure ratio. The demonstrated performance not only exceeded the contract performance goals, but also represents the highest known demonstrated compressor performance in this pressure ratio and flow class. The performance demonstrated is particularly significant in that it was accomplished at airfoil loading levels approximately 15% higher than that of current production engine compressor designs. The test results provide conclusive verification of the advanced low aspect ratio axial compressor and centrifugal stage technologies utilized.

Schweitzer, J. K.; Smith, J. D.

1981-03-01T23:59:59.000Z

470

Alternatives for management of wastes generated by the formerly utilized sites remedial action program and supplement  

SciTech Connect (OSTI)

Alternatives for disposal or stabilization of the wastes generated by the US Department of Energy's Formerly Utilized Sites Remedial Action Program (FUSRAP) are identified and compared, with emphasis on the long-term aspects. These wastes consist of soil material and rubble containing trace amounts of radionuclides. A detailed pathway analysis for the dose to the maximally exposed individual is carried out using an adaptation of the natural analogue method. Comparisons of the different alternatives, based on the results of the pathway analysis and qualitative cost considerations, indicate that, if the hazard is such that the wastes must be removed and disposed of rather than stabilized in place, disposal by immediate dispersal is preferable to containment, and containment followed by slow planned dispersal is preferable to containment without dispersal. The Supplement presents refinements of work that was reported at the 1982 International Decommissioning Symposium. The new material consists of revisions of the estimates of the predicted potential dose to the maximally exposed individual and a more detailed comparative assessment of the radiological impacts of alternatives for management of wastes generated by the US Department of Energy's Formerly Utilized Sites Remedial Action Program (FUSRAP).

Gilbert, T.L.; Peterson, J.M.; Vocke, R.W.; Alexander, J.K.

1983-03-01T23:59:59.000Z

471

U.S. Department of Energy (DOE) Industrial Programs and Their Impacts  

E-Print Network [OSTI]

of Molten Salts from Molten Aluminum Alloys - - - - - High-Capacity Melt Furnace 0.000 0.000 - 0.000 0.000 Onsite Process for Recovering Waste Aluminum 0.139 0.016 - 0.016 2.20 Oxygen-Enhanced Combustion for Recycled Aluminum 0.025 - - 0.003 0... of the best energy-saving tech- nologies and practices within industry. In addition to these strategies, ITP partners with other program areas within EERE and performs on- going program evaluation, including assessing past programs and the benefits...

Weakley, S. A.; Roop, J. M.

2004-01-01T23:59:59.000Z

472

Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs  

E-Print Network [OSTI]

Energy Program Weatherization Assistance Program Executivelow-income Weatherization Assistance Program (WAP), WAP haslow-income Weatherization Assistance Program (WAP); and

Goldman, Charles A.

2011-01-01T23:59:59.000Z

473

Technology Roadmap for the 21st Century Truck Program, a government-industry research partnership  

SciTech Connect (OSTI)

The 21st Century Truck Program has been established as a government-industry research partnership to support the development and implementation of commercially viable technologies that will dramatically cut fuel use and emissions of commercial trucks and buses while enhancing their safety and affordability as well as maintaining or enhancing performance. The innovations resulting from this program will reduce dependence on foreign oil, improve our nation's air quality, provide advanced technology for military vehicles, and enhance the competitiveness of the U.S. truck and bus industry while ensuring safe and affordable freight and bus transportation for the nation's economy. This Technology Roadmap for the 21st Century Truck Program has been prepared to guide the development of the technical advancements that will enable the needed improvements in commercial truck fuel economy, emissions, and safety.

None

2000-12-01T23:59:59.000Z

474

Industry  

SciTech Connect (OSTI)

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01T23:59:59.000Z

475

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report  

SciTech Connect (OSTI)

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01T23:59:59.000Z

476

Standard guide for establishing a quality assurance program for analytical chemistry laboratories within the nuclear industry  

E-Print Network [OSTI]

1.1 This guide covers the establishment of a quality assurance (QA) program for analytical chemistry laboratories within the nuclear industry. Reference to key elements of ANSI/ISO/ASQC Q9001, Quality Systems, provides guidance to the functional aspects of analytical laboratory operation. When implemented as recommended, the practices presented in this guide will provide a comprehensive QA program for the laboratory. The practices are grouped by functions, which constitute the basic elements of a laboratory QA program. 1.2 The essential, basic elements of a laboratory QA program appear in the following order: Section Organization 5 Quality Assurance Program 6 Training and Qualification 7 Procedures 8 Laboratory Records 9 Control of Records 10 Control of Procurement 11 Control of Measuring Equipment and Materials 12 Control of Measurements 13 Deficiencies and Corrective Actions 14

American Society for Testing and Materials. Philadelphia

2006-01-01T23:59:59.000Z

477

Radiation Protection Considerations at USACE Formerly Utilized Sites Remedial Action Program (FUSRAP) Projects  

SciTech Connect (OSTI)

The Formerly Utilized Sites Remedial Action Program (FUSRAP) was initially authorized by Congress in 1974. FUSRAP was enacted to address residual radioactive contamination associated with numerous sites across the U.S. at which radioactive material (primarily Uranium ores and related milling products) had been processed in support of the nation's nuclear weapons program dating back to the Manhattan Project and the period immediately following World War II. In October 1997, Congress transferred the management of this program from the Department of Energy to the United States Corp of Engineers. Through this program, the Corps addresses the environmental remediation of certain sites once used by DOE's predecessor agencies, the Manhattan Engineer District and the Atomic Energy Commission. The waste at FUSRAP sites consists mainly of low levels of uranium, thorium and radium, along with some mixed wastes. Upon completion of remedial activities, these sites are transferred to DOE for long-term stewardship activities. This paper presents and contrasts the radiological conditions and recent monitoring results associated with five large ongoing FUSRAP projects including Maywood, N.J.; the Linde site near Buffalo, N.Y.; Colonie in Albany N.Y. and the St Louis, Mo. airport and downtown sites. The radiological characteristics of soil and debris at each site and respective regulatory clean up criteria is presented and contrasted. Some differences are discussed in the radiological characteristics of material at some sites that result in variations in radiation protection monitoring programs. Additionally, summary data for typical personnel radiation exposure monitoring results are presented. In summary: 1. The FUSRAP projects for which data and observations are reported in this paper are considered typical of the radiological nature of FUSRAP sites in general. 2. These sites are characterized by naturally occurring uranium and thorium series radionuclides in soil and debris, at concentrations typically < E4 pCi/ gram total activity. 3. Although external exposure rates are generally low resulting in few exposures above background, occasional 'hot spots' are observed in the 1- 10 mR / hr range or higher. However personnel and general area external exposure monitoring programs consistently demonstrate very low potential for external exposure at theses sites. 4. Potential for airborne exposure is controlled by wetting and misting techniques during excavation and movement of materials. Air sampling and bioassay programs confirm low potential for airborne exposure of workers at these sites. 5. Radiation protection and health physics monitoring programs as implemented at these sites ensure that exposures to personal are maintained ALARA. (authors)

Brown, S.H. [CHP, SHB INC., Centennial, Colorado (United States)

2008-07-01T23:59:59.000Z

478

Colonie Interim Storage Site environmental report for calendar year 1992, 1130 Central Avenue, Colonie, New York. Formerly Utilized Sites Remedial Action Program (FUSRAP)  

SciTech Connect (OSTI)

This report describes the environmental surveillance program at the Colonie Interim Storage Site (CISS) and provides the results for 1992. The site is located in eastern New York State, approximately 6.4 km (4.0 mi) northwest of downtown Albany. From 1958 to 1984, National Lead (NL) Industries used the facility to manufacture various components from depleted and enriched uranium natural thorium. Environmental monitoring of CISS began in 1984 when Congress added, the site to the US Department of Energy`s (DOE) Formerly Utilized Sites Remedial Action Program (FUSRAP). FUSRAP is a program established to identify and decontaminate or otherwise control sites where residual radioactive materials remain from the early years of the nation`s atomic energy program or from commercial operations causing conditions that Congress has authorized DOE to remedy. The environmental surveillance program at CISS includes sampling networks for external gamma radiation exposure and for thorium-232 and total uranium concentrations in surface water, sediment, and groundwater. Several chemical parameters are also measured in groundwater, including total metals, volatile organics, and water quality parameters. This surveillance program assists in fulfilling the DOE policy of measuring and monitoring effluents from DOE activities and calculating hypothetical doses. Results are compared with applicable Environmental Protection Agency (EPA) and New York State Department of Environmental Conservation (NYSDEC) standards, DOE derived concentration guides (DCGs), dose limits, and other DOE requirements.

Not Available

1993-05-01T23:59:59.000Z

479

Industrial - Utility Cogeneration Systems  

E-Print Network [OSTI]

Cogeneration may be described as an efficient method for the production of electric power in conjunction with process steam or heat which optimizes the energy supplied as fuel to maximize the energy produced for consumption. In a conventional...

Harkins, H. L.

1979-01-01T23:59:59.000Z

480

Cogeneration - A Utility Perspective  

E-Print Network [OSTI]

are discussed from a utility perspective as how they influence utility participation in future projects. The avoided cost methodology is examined, and these payments for sale of energy to the utility are compared with utility industrial rates. In addition...

Williams, M.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial utility program" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

U.S. Department of Energy’s Industrial Technologies Program and Its Impacts  

SciTech Connect (OSTI)

The U.S. Department of Energy’s Industrial Technologies Program (ITP) has been working with industry since 1976 to encourage the development and adoption of new, energy-efficient technologies. ITP has helped industry not only use energy and materials more efficiently but also improve environ-mental performance, product quality, and productivity. To help ITP determine the impacts of its pro-grams, Pacific Northwest National Laboratory (PNNL) periodically reviews and analyzes ITP pro-gram benefits. PNNL contacts vendors and users of ITP-sponsored technologies that have been commer-cialized, estimates the number of units that have penetrated the market, conducts engineering analyses to estimate energy savings from the new technolo-gies, and estimates air pollution and carbon emission reductions. This paper discusses the results of PNNL’s most recent review (conducted in 2010). From 1976-2009, the commercialized technologies from ITP’s research and development programs and other activities have cumulatively saved 10.0 quadrillion Btu, with a net cost savings of $61.82 billion.

Weakley, Steven A.; Brown, Scott A.

2011-05-20T23:59:59.000Z

482

U.S. Department of Energy’s Industrial Technology Program and Its Impacts  

SciTech Connect (OSTI)

The U.S. Department of Energy’s Industrial Technologies Program (ITP) has been working with industry since 1976 to encourage the development and adoption of new, energy-efficient technologies. ITP has helped industry not only use energy and materials more efficiently but also improve environ-mental performance, product quality, and productivity. To help ITP determine the impacts of its pro-grams, Pacific Northwest National Laboratory (PNNL) periodically reviews and analyzes ITP pro-gram benefits. PNNL contacts vendors and users of ITP-sponsored technologies that have been commer-cialized, estimates the number of units that have penetrated the market, conducts engineering analyses to estimate energy savings from the new technolo¬gies, and estimates air pollution and carbon emission reductions. This paper discusses the results of PNNL’s most recent review (conducted in 2009). From 1976-2008, the commercialized technologies from ITP’s research and development programs and other activities have cumulatively saved 9.27 quadrillion Btu, with a net cost savings of $63.91 billion.

Weakley, Steven A.; Roop, Joseph M.

2010-05-15T23:59:59.000Z

483

Saint Peter Municipal Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit,...

484

New Prague Utilities Commission- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to eighteen non-profit, municipally...

485

Spring Valley Public Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit, municipally...

486

Redwood Falls Public Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southern Minnesota Municipal Power Agency ([http://www.smmpa.com SMMPA]) is a joint-action agency which generates and sells reliable electricity at wholesale to its eighteen non-profit,...

487

Utility and State Industrial Efficient Motors Systems Incentives Programs: Experience and Success Factors  

E-Print Network [OSTI]

. The Washington Slate Energy Office provides technology transfer and efficiency information. WSEO also developed and maintains the MotorMaster energy-efficient motor database, which is distributed nationally. The Wisconsin Energy Bureau will provide...

Roop, J. M.; Stucky, D. J.

488

Background report for the formerly utilized Manhattan Engineer District/Atomic Energy Commission sites program  

SciTech Connect (OSTI)

The Department of Energy is conducting a program to determine radiological conditions at sites formerly used by the Army Corps of Engineers' Manhattan Engineer District and the Atomic Energy Commission in the early years of nuclear energy development. Also included in the program are sites used in the Los Alamos plutonium development program and the Trinity atomic bomb test site. Materials, equipment, buildings, and land became contaminated, primarily with naturally occurring radioactive nuclides. They were later decontaminated in accordance with the standards and survey methods in use at that time. Since then, however, radiological criteria, and proposed guidelines for release of such sites for unrestricted use have become more stringent as research on the effects of low-level radiation has progressed. In addition, records documenting some of these decontamination efforts cannot be found, and the final radiological conditions of the sites could not be adequately determined from the records. As a result, the Formerly Utilized Sites Program was initiated in 1974 to identify these formerly used sites and to reevaluate their radiological status. This report covers efforts through June 1980 to determine the radiological status of sites for which the existing conditions could not be clearly defined. Principal contractor facilities and associated properties have already been identified and activities are continuing to identify additional sites. Any new sites located will probably be subcontractor facilities and areas used for disposal of contractor waste or equipment; however, only limited information regarding this equipment and material has been collected to date. As additional information becomes available, supplemental reports will be published.

None

1980-09-01T23:59:59.000Z

489

U.S. Department of Energy Program of International Technical Cooperation for Research Reactor Utilization  

SciTech Connect (OSTI)

The U.S. Department of Energy, National Nuclear Security Administration (DOE/NNSA) has initiated collaborations with the national nuclear authorities of Egypt, Peru, and Romania for the purpose of advancing the commercial potential and utilization of their respective research reactors. Under its Office of International Safeguards ''Sister Laboratory'' program, DOE/NNSA has undertaken numerous technical collaborations over the past decade intended to promote peaceful applications of nuclear technology. Among these has been technical assistance in research reactor applications, such as neutron activation analysis, nuclear analysis, reactor physics, and medical radioisotope production. The current collaborations are intended to provide the subject countries with a methodology for greater commercialization of research reactor products and services. Our primary goal is the transfer of knowledge, both in administrative and technical issues, needed for the establishment of an effective business plan and utilization strategy for the continued operation of the countries' research reactors. Technical consultation, cooperation, and the information transfer provided are related to: identification, evaluation, and assessment of current research reactor capabilities for products and services; identification of opportunities for technical upgrades for new or expanded products and services; advice and consultation on research reactor upgrades and technical modifications; characterization of markets for reactor products and services; identification of competition and estimation of potential for market penetration; integration of technical constraints; estimation of cash flow streams; and case studies.

Chong, D.; Manning, M.; Ellis, R.; Apt, K.; Flaim, S.; Sylvester, K.

2004-10-03T23:59:59.000Z

490

Lessons learned from new construction utility demand side management programs and their implications for implementing building energy codes  

SciTech Connect (OSTI)

This report was prepared for the US Department of Energy (DOE) Office of Codes and Standards by the Pacific Northwest Laboratory (PNL) through its Building Energy Standards Program (BESP). The purpose of this task was to identify demand-side management (DSM) strategies for new construction that utilities have adopted or developed to promote energy-efficient design and construction. PNL conducted a survey of utilities and used the information gathered to extrapolate lessons learned and to identify evolving trends in utility new-construction DSM programs. The ultimate goal of the task is to identify opportunities where states might work collaboratively with utilities to promote the adoption, implementation, and enforcement of energy-efficient building energy codes.

Wise, B.K.; Hughes, K.R.; Danko, S.L.; Gilbride, T.L.

1994-07-01T23:59:59.000Z

491

US Air Force Facility Energy Management Program - How Industry Can Help the Air Force Meet Its Objectives  

E-Print Network [OSTI]

This paper describes the Air Force's facility energy management program including how industry can help the Air Force meet its facility energy objectives. Background information on energy use and energy conservation efforts are presented to give...

Holden, P. C.; Kroop, R. H.

1983-01-01T23:59:59.000Z

492

Voluntary Agreements for Energy Efficiency or GHG EmissionsReduction in Industry: An Assessment of Programs Around the World  

SciTech Connect (OSTI)

Voluntary agreements for energy efficiency improvement and reduction of energy-related greenhouse gas (GHG) emissions have been a popular policy instrument for the industrial sector in industrialized countries since the 1990s. A number of these national-level voluntary agreement programs are now being modified and strengthened, while additional countries--including some recently industrialized and developing countries--are adopting these type of agreements in an effort to increase the energy efficiency of their industrial sectors.Voluntary agreement programs can be roughly divided into three broad categories: (1) programs that are completely voluntary, (2) programs that use the threat of future regulations or energy/GHG emissions taxes as a motivation for participation, and (3) programs that are implemented in conjunction with an existing energy/GHG emissions tax policy or with strict regulations. A variety of government-provided incentives as well as penalties are associated with these programs. This paper reviews 23 energy efficiency or GHG emissions reduction voluntary agreement programs in 18 countries, including countries in Europe, the U.S., Canada, Australia, New Zealand, Japan, South Korea, and Chinese Taipei (Taiwan) and discusses preliminary lessons learned regarding program design and effectiveness. The paper notes that such agreement programs, in which companies inventory and manage their energy use and GHG emissions to meet specific reduction targets, are an essential first step towards GHG emissions trading programs.

Price, Lynn

2005-06-01T23:59:59.000Z

493

E-FUSRAP: AUTOMATING THE CASE FILE FOR THE FORMERLY UTILIZED SITES REMEDIAL ACTION PROGRAM  

SciTech Connect (OSTI)

The Department of Energy's (DOE) Office of Site Closure, EM-30, houses the document library pertaining to sites that are related to the Formerly Utilized Sites Remedial Action Program (FUSRAP) and regularly addresses ongoing information demands, primarily from Freedom of Information Act (FOIA) requests, interested members of the public, the DOE, and other Federal Agencies. To address these demands more efficiently, DOE has begun to implement a new multi-phase, information management process known as e-FUSRAP. The first phase of e-FUSRAP, the development of the Considered Sites Database, summarizes and allows public access to complex information on over 600 sites considered as candidates for FUSRAP. The second phase of e-FUSRAP, the development of the Document Indexing Database, will create an internal index of more than 10,000 documents in the FUSRAP library's case file, allowing more effective management and retrieval of case file documents. Together, the phases of e-FUSRAP will allow EM-30 to become an innovative leader in enhancing public information sources.

Mackenzie, D.; Marshall, K.

2003-02-27T23:59:59.000Z

494

Overview of the U.S. Department of Energy Formerly Utilized Sites Remedial Action Program - 12189  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) Formerly Utilized Sites Remedial Action Program (FUSRAP) was established in 1974 to address residual radiological contamination at sites where work was performed for the Manhattan Engineer District and U.S. Atomic Energy Commission. Initially, FUSRAP activities began with a records search for sites that had the potential to contain residual radiological contamination; 46 sites were identified that were eligible for and required remediation. Remedial action began in 1979. In 1997, Congress assigned responsibility for the remediation of FUSRAP sites to the U.S. Army Corps of Engineers (USACE). DOE retains responsibility for determining if sites are eligible for FUSRAP remediation and for providing long-term surveillance and maintenance (LTS&M) of remediated FUSRAP sites. DOE LTS&M activities are designed to ensure that FUSRAP sites remain protective of human health and the environment and to preserve knowledge regarding FUSRAP sites. Additional elements include eligibility determinations, transition of remediated sites from USACE to DOE, LTS&M operations such as inspections and institutional controls management, stakeholder support, preservation of records, and real property and reuse. DOE maintains close coordination with USACE and regulators to ensure there is no loss of protectiveness when sites transition to DOE for LTS&M.

Clayton, Christopher [U.S. Department of Energy Office of Legacy Management, Washington, DC; Kothari, Vijendra [U.S. Department of Energy Office of Legacy Management, Morgantown, West Virginia; Starr, Ken [U.S. Department of Energy Office of Legacy Management, Westminster, Colorado; Gillespie, Joey [S.M. Stoller Corporation, Contractor for the U.S. Department of Energy Office of Legacy Management, Grand Junction, Colorado; Widdop, Michael [S.M. Stoller Corporation, Contractor for the U.S. Department of Energy Office of Legacy Management, Grand Junction, Colorado; none,

2012-02-26T23:59:59.000Z

495

Central Wind Power Forecasting Programs in North America by Regional Transmission Organizations and Electric Utilities  

SciTech Connect (OSTI)

The report addresses the implementation of central wind power forecasting by electric utilities and regional transmission organizations in North America.

Porter, K.; Rogers, J.

2009-12-01T23:59:59.000Z

496

Analysis of the Clean Air Act Amendments of 1990: A forecast of the electric utility industry response to Title IV, Acid Deposition Control  

SciTech Connect (OSTI)

The Clean Air Act Amendments of 1990 incorporate, for the first time, provisions aimed specifically at the control of acid rain. These provisions restrict emissions of sulfur dioxide (SO{sub 2}) and oxides of nitrogen (NO{sub x}) from electric power generating stations. The restrictions on SO{sub 2} take the form of an overall cap on the aggregate emissions from major generating plants, allowing substantial flexibility in the industry`s response to those restrictions. This report discusses one response scenario through the year 2030 that was examined through a simulation of the utility industry based on assumptions consistent with characterizations used in the National Energy Strategy reference case. It also makes projections of emissions that would result from the use of existing and new capacity and of the associated additional costs of meeting demand subject to the emission limitations imposed by the Clean Air Act. Fuel-use effects, including coal-market shifts, consistent with the response scenario are also described. These results, while dependent on specific assumptions for this scenario, provide insight into the general character of the likely utility industry response to Title IV.

Molburg, J.C.; Fox, J.A.; Pandola, G.; Cilek, C.M.

1991-10-01T23:59:59.000Z

497

U.S. Department of Energy (DOE) Industrial Programs and Their Impacts  

E-Print Network [OSTI]

.062 - 0.003 - 0.093 12.6 Aluminum Scrap Sorting 0.361 0.270 0.002 0.001 0.078 0.058 7.09 Detection and Removal of Molten Salts from Molten Aluminum Alloys - - - - - - - High-Capacity Melt Furnace 0.000 0.000 - 0.000 - 0.000 0.000 Oxygen-Enhanced Combustion... evaluation, including assessing past programs and the benefits that have accrued from investments. Through emphasis on technologies and practices, the ITP uses its IOF process to increase the efficiency of industrial energy use, both now...

Weakley, S. A.; Roop, J. M.

2005-01-01T23:59:59.000Z

498

Energy Efficient Industrialized Housing Research Program, Center for Housing Innovation, University of Oregon and the Florida Solar Energy Center  

SciTech Connect (OSTI)

This research program addresses the need to increase the energy efficiency of industrialized housing. Two research centers have responsibility for the program: the Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. The two organizations provide complementary architectural, systems engineering, and industrial engineering capabilities. In 1989 we worked on these tasks: (1) the formation of a steering committee, (2) the development of a multiyear research plan, (3) analysis of the US industrialized housing industry, (4) assessment of foreign technology, (5) assessment of industrial applications, (6) analysis of computerized design and evaluation tools, and (7) assessment of energy performance of baseline and advanced industrialized housing concepts. The current research program, under the guidance of a steering committee composed of industry and government representatives, focuses on three interdependent concerns -- (1) energy, (2) industrial process, and (3) housing design. Building homes in a factory offers the opportunity to increase energy efficiency through the use of new materials and processes, and to increase the value of these homes by improving the quality of their construction. Housing design strives to ensure that these technically advanced homes are marketable and will meet the needs of the people who will live in them.

Brown, G.Z.

1990-01-01T23:59:59.000Z

499

Central Wind Forecasting Programs in North America by Regional Transmission Organizations and Electric Utilities: Revised Edition  

SciTech Connect (OSTI)

The report and accompanying table addresses the implementation of central wind power forecasting by electric utilities and regional transmission organizations in North America. The first part of the table focuses on electric utilities and regional transmission organizations that have central wind power forecasting in place; the second part focuses on electric utilities and regional transmission organizations that plan to adopt central wind power forecasting in 2010. This is an update of the December 2009 report, NREL/SR-550-46763.

Rogers, J.; Porter, K.

2011-03-01T23:59:59.000Z

500

Electric Market and Utility Operation Terminology (Fact Sheet), Solar Energy Technologies Program (SETP)  

Broader source: Energy.gov [DOE]

This fact sheet is a list of electric market and utility operation terminology for a series of three electricity fact sheets.