Powered by Deep Web Technologies
Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Tax-Exempt Industrial Revenue Bonds (Kansas)  

Broader source: Energy.gov [DOE]

Tax-Exempt Industrial Revenue Bonds are issued by cities and counties for the purchase, construction, improvement or remodeling of a facility for agricultural, commercial, hospital, industrial,...

2

Industrial Revenue Bond Issuance Cost Assistance (Wisconsin)  

Broader source: Energy.gov [DOE]

Industrial Revenue Bonds (IRB) are tax-exempt bonds that can be used to stimulate capital investment and job creation by providing private borrowers with access to financing at interest rates that...

3

Single-Issue Industrial Revenue Bond Program (Missouri)  

Broader source: Energy.gov [DOE]

The Missouri Development Finance Board administers a Single-Issue Tax-Exempt Industrial Revenue Bond Program as well as a Taxable Industrial Revenue Bond Program. The Tax-Exempt Program finances (i...

4

Industrial Revenue Bond Program (District of Columbia)  

Broader source: Energy.gov [DOE]

The District provides below market bond financing to lower the costs of borrowing for qualified capital construction and renovation projects. The program is available to non-profits, institutions,...

5

Local Government Revenue Bonds (Montana)  

Broader source: Energy.gov [DOE]

Limited obligation local government bonds ("special revenue bonds") may be issued for qualified electric energy generation facilities, including those powered by renewables. These bonds generally...

6

Private Activity Revenue Bonds (Maryland)  

Broader source: Energy.gov [DOE]

Private Activity Revenue Bonds are available in the form of both taxable bonds and tax-exempt bonds. Both types of bonds provide access to long-term capital markets for fixed asset financing....

7

Local Option- Industrial Facilities and Development Bonds (Utah)  

Broader source: Energy.gov [DOE]

Under the Utah Industrial Facilities and Development Act, counties, municipalities, and state universities in Utah may issue Industrial Revenue Bonds (IRBs) or Industrial Development Bonds (IDBs)...

8

2013 Total Electric Industry- Revenue (Thousands Dollars)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import CostsLiquids Reserve3.Revenue (Thousands Dollars) (Data

9

Bond Financing Program (New Hampshire)  

Broader source: Energy.gov [DOE]

BFA’s Bond Financing Program offers tax-exempt and taxable bonds for fixed-asset expansion projects. Industrial development revenue bonds can be used by manufacturers for the acquisition,...

10

1. Was your auditor for the Revenue Bond Series 2003A and 2005A financial audit year ended 6/30/12 invited to bid?  

E-Print Network [OSTI]

IFB13403 1. Was your auditor for the Revenue Bond Series 2003A and 2005A financial audit year for last year's audit? The existing contract budget is structured with hourly rates, so there isn't a set fee structure for each audit. The cumulative total of invoices for the FY 11/12 audit was $16

11

The challenges of improving revenue-recognition standard for multiple-element firms:evidence from the software industry (SOP 97-2)  

E-Print Network [OSTI]

I investigated whether implementing SOP 97-2, the revenue-recognition standard for the software industry, reduces earnings informativeness. This standard is particularly important for two reasons: First, its provisions coincide with provisions...

Srivastava, Anup

2008-10-10T23:59:59.000Z

12

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales...  

Open Energy Info (EERE)

Commercial Sales (MWh) 128656 Commercial Consumers 48190 Industrial Revenue (Thousand ) 871 Industrial Sales (MWh) 14240 Industrial Consumers 485 Other Revenue (Thousand ) 70...

13

Public Bonding Options | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

While the revenue stream need not be directly related to the financed project, capital lease revenue bonds entail a third party guaranteeing an energy savings revenue stream,...

14

Electric sales and revenue: 1993  

SciTech Connect (OSTI)

The Electric Sales and Revenue is prepared by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. This publication provides information about sales of electricity, its associated revenue, and the average revenue per kilowatthour sold to residential, commercial, industrial, and other consumers throughout the United States. The sales, revenue, and average revenue per kilowatthour data provided in the Electric Sales and Revenue are based on annual data reported by electric utilities for the calendar year ending December 31, 1993. Operating revenue includes energy charges, demand charges, consumer service charges, environmental surcharges, fuel adjustments, and other miscellaneous charges. The revenue does not include taxes, such as sales and excise taxes, that are assessed on the consumer and collected through the utility. Average revenue per kilowatthour is defined as the cost per unit of electricity sold and is calculated by dividing retail sales into the associated electric revenue. Because electric rates vary based on energy usage, average revenue per kilowatthour are affected by changes in the volume of sales. The sales of electricity, associated revenue, and average revenue per kilowatthour data provided in this report are presented at the national, Census division, State, and electric utility levels.

Not Available

1995-01-01T23:59:59.000Z

15

Ak-Chin Electric Utility Authority (Arizona) EIA Revenue and...  

Open Energy Info (EERE)

81 Residential Sales (MWh) 647 Residential Consumers 290 Commercial Revenue(Thousand ) 168.985 Commercial Sales (MWh) 2306 Commercial Consumers 81 Industrial Revenue (Thousand )...

16

Electric sales and revenue 1992, April 1994  

SciTech Connect (OSTI)

The Electric Sales and Revenue is prepared by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. This publication provides information about sales of electricity, its associated revenue, and the average revenue per kilowatthour sold to residential, commercial, industrial, and other consumers throughout the United States. The sales, revenue, and average revenue per kilowatthour provided in the Electric Sales and Revenue are based on annual data reported by electric utilities for the calendar year ending December 31, 1992. The electric revenue reported by each electric utility includes the applicable revenue from kilowatthours sold; revenue from income; unemployment and other State and local taxes; energy, demand, and consumer service charges; environmental surcharges; franchise fees; fuel adjustments; and other miscellaneous charges. The revenue does not include taxes, such as sales and excise taxes, that are assessed on the consumer and collected through the utility. Average revenue per kilowatthour is defined as the cost per unit of electricity sold and is calculated by dividing retail sales into the associated electric revenue. The sales of electricity, associated revenue, and average revenue per kilowatthour provided in this report are presented at the national, Census division, State, and electric utility levels.

Not Available

1994-04-20T23:59:59.000Z

17

Ak-Chin Electric Utility Authority (Arizona) EIA Revenue and...  

Open Energy Info (EERE)

) 2.674 Industrial Sales (MWh) 80 Industrial Consumers 45 Total Revenue (Thousand ) 132.759 Total Sales (MWh) 1919 Total Consumers 416 Source: Energy Information Administration....

18

Crop Revenue Coverage (CRC)  

E-Print Network [OSTI]

Crop Revenue Coverage guarantees a stated amount of revenue based on commodity futures prices. This publication explains how CRC works and gives examples based on harvest price scenarios....

Stokes, Kenneth; Barnaby, G. A. Art; Waller, Mark L.; Outlaw, Joe

2008-10-17T23:59:59.000Z

19

Revenue impacts of airline yield management  

E-Print Network [OSTI]

In the highly competitive airline industry today, Yield or Revenue Management is extremely important to the survival of any carrier. Since fares are generally matched by all carriers to be competitive, the ability of an ...

Mak, Chung Yu

1992-01-01T23:59:59.000Z

20

OPEC Revenues Fact Sheet  

Reports and Publications (EIA)

This report includes estimates of OPEC net oil export revenues, based on historical estimates and forecasts from the latest Energy Information Administration (EIA) Short-Term Energy Outlook.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Electric $ales and revenue 1995  

SciTech Connect (OSTI)

This publication provides information on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers in the United States.

NONE

1996-12-01T23:59:59.000Z

22

"TheWoundedU.S.NewspaperIndustryLost$7.5BillioninAdvertising RevenuesLastYear(2009)" --TechCrunch  

E-Print Network [OSTI]

progress. Z Viafoura and Project Definition Prototype Conclusion Video and Audio on Viafoura Gamification Elements, Leader Boards Gamification Elements, Badges and Virtual Points Results Industrial Engineering

23

Electric sales and revenue 1996  

SciTech Connect (OSTI)

Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1996. 16 figs., 20 tabs.

NONE

1997-12-01T23:59:59.000Z

24

The revenue imperative  

E-Print Network [OSTI]

56 66 68 68 69 74 79 85 89 92 Introduction Chairman Stevens The Direct Tax 92 93 97 TABLE OF CONTENTS, CONTINUED CHAPTER The Internal Revenue Measures Conclusion VI CONCLUSION REFERENCES APPENDIX I: FEDERAL RECEIPTS, 1800... no injuries occurred and the crowds dissipated as quickly as they had formed, President John Adams followed Washington's precedent and sent armed forces to Bucks County to quell the revolt. Sixty protestors were arrested. In writing the Constitution...

Flaherty, Jane

2000-01-01T23:59:59.000Z

25

Capital and revenue expenditures  

E-Print Network [OSTI]

T and Charaoteristios of Various Expenditures ~ ~ 7 III. Bases for Expenditure Classifioationi ~ ~ ~ ~ ~ ~ ~ ~ r ~ ' ~ IV ~ Methods of kooountiag for Capital and Revenue Expenditure( ~ ~ I CkPITLL ERE RKVRRUm bXPLM)ITURkiS ISTRORUGTIOR kn ?ttonpt will be made... not tahe tho plass of asy asset or part of aa asset already onistiag Ln a business, but give tho already sainting fined asset ealues an a44ed physioal value whioh they did not previously possess ~ Additions rosoable original oost in that both...

Owens, Jack Bailey

1948-01-01T23:59:59.000Z

26

Electric sales and revenue 1997  

SciTech Connect (OSTI)

The Electric Sales and Revenue is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1997. 16 figs., 17 tabs.

NONE

1998-10-01T23:59:59.000Z

27

Electric sales and revenue 1994  

SciTech Connect (OSTI)

The Electric Sales and Revenue is prepared by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the United States. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1994.

NONE

1995-11-01T23:59:59.000Z

28

FOUNDATION REVENUE OBJECT CODES LSU Foundation Revenue Object Codes  

E-Print Network [OSTI]

FOUNDATION REVENUE OBJECT CODES 4 page 1 LSU Foundation Revenue Object Codes 0F00 Foundation - Balance Forward 0F01 Foundation - Other Contributions 0F02 Foundation - State of Louisiana 0F03 Foundation - Corporate Contributions 0F04 Foundation - Corporate Match Contributions 0F05 Foundation - Individual

Harms, Kyle E.

29

Evolution of the U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008  

E-Print Network [OSTI]

HVAC retrofits. In contrast, median payback time for lighting only Breakdown of industry revenues by market

Goldman, Charles A.

2013-01-01T23:59:59.000Z

30

ENVIRONMENTAL REVENUE STREAMS FOR COMBINED HEAT AND POWER | Department...  

Broader source: Energy.gov (indexed) [DOE]

ENVIRONMENTAL REVENUE STREAMS FOR COMBINED HEAT AND POWER ENVIRONMENTAL REVENUE STREAMS FOR COMBINED HEAT AND POWER ENVIRONMENTAL REVENUE STREAMS FOR COMBINED HEAT AND POWER...

31

Assessment of net lost revenue adjustment mechanisms for utility DSM programs  

SciTech Connect (OSTI)

Utility shareholders can lose money on demand-side management (DSM) investments between rate cases. Several industry analysts argue that the revenues lost from utility DSM programs are an important financial disincentive to utility DSM investment. A key utility regulatory reform undertaken since 1989 allows utilities to recover the lost revenues incurred through successful operation of DSM programs. Explicitly defined net lost revenue adjustment (NLRA) mechanisms are states` preferred approach to lost revenue recovery from DSM programs. This report examines the experiences states and utilities are having with the NLRA approach. The report has three objectives. First, we determine whether NLRA is a feasible and successful approach to removing the lost-revenue disincentive to utility operation of DSM programs. Second, we identify the conditions linked to successful implementation of NLRA mechanisms in different states and assess whether NLRA has changed utility investment behavior. Third, we suggest improvements to NLRA mechanisms. We first identify states with NLRA mechanisms where utilities are recovering lost revenues from DSM programs. We interview staff at regulatory agencies in all these states and utility staff in four states. These interviews focus on the status of NLRA, implementation issues, DSM measurement issues, and NLRA results. We also analyze regulatory agency orders on NLRA, as well as associated testimony, reports, and utility lost revenue recovery filings. Finally, we use qualitative and quantitative indicators to assess NLRA`s effectiveness. Contrary to the concerns raised by some industry analysts, our results indicate NLRA is a feasible approach to the lost-revenue disincentive.

Baxter, L.W.

1995-01-01T23:59:59.000Z

32

Utility-Based Revenue Streams- Notes  

Broader source: Energy.gov [DOE]

Better Buildings Neighborhood Program October 2011 Workshop Summary of Revenue Streams from Breakout Sessions (11/20/11).

33

Budget/Object Codes -REVENUE Budget/Object Codes -REVENUE BUDGET/OBJECT BUDGET/OBJECT  

E-Print Network [OSTI]

Budget/Object Codes -REVENUE Budget/Object Codes - REVENUE BUDGET/OBJECT BUDGET/OBJECT BUDGET CODE DESCRIPTION BUDGET CODE DESCRIPTION 01 30 0101 On-Campus-Full Time 3001 Federal Program 0102 On APPROPRIATIONS #12;Budget/Object Codes -REVENUE Budget/Object Codes - REVENUE BUDGET/OBJECT BUDGET/OBJECT BUDGET

Selmic, Sandra

34

Industry  

E-Print Network [OSTI]

SHIP - Solar heat for industrial processes. Internationalsolar power could be used to provide process heat for

Bernstein, Lenny

2008-01-01T23:59:59.000Z

35

Qualified Energy Conservation Bond (QECB) Update: New Guidance...  

Broader source: Energy.gov (indexed) [DOE]

the U.S. Department of Treasury and the Internal Revenue Service Qualified Energy Conservation Bond (QECB) Update: New Guidance from the U.S. Department of Treasury and the...

36

Industry  

E-Print Network [OSTI]

of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

Bernstein, Lenny

2008-01-01T23:59:59.000Z

37

Study Shows Active Power Controls from Wind May Increase Revenues...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Study Shows Active Power Controls from Wind May Increase Revenues and Improve System Reliability Study Shows Active Power Controls from Wind May Increase Revenues and Improve...

38

Mineral Recovery Creates Revenue Stream for Geothermal Energy...  

Energy Savers [EERE]

Mineral Recovery Creates Revenue Stream for Geothermal Energy Development Mineral Recovery Creates Revenue Stream for Geothermal Energy Development January 21, 2014 - 12:00am...

39

Financing and Revenue: Crowd Funding: Enabling Small Investors...  

Broader source: Energy.gov (indexed) [DOE]

Financing and Revenue: Crowd Funding: Enabling Small Investors to Help Fund Business Loans for E3 Upgrades Peer Exchange Call Financing and Revenue: Crowd Funding: Enabling Small...

40

4-County Electric Power Assn (Mississippi) EIA Revenue and Sales...  

Open Energy Info (EERE)

Residential Revenue(Thousand ) 5629 Residential Sales (MWh) 49312 Residential Consumers 35980 Commercial Revenue(Thousand ) 2031 Commercial Sales (MWh) 15395 Commercial Consumers...

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Industry  

E-Print Network [OSTI]

options for combined heat and power in Canada. Office ofpolicies to promote combined heat and power in US industry.with fuel inputs in combined heat and power plants being

Bernstein, Lenny

2008-01-01T23:59:59.000Z

42

Industry  

E-Print Network [OSTI]

EJ of primary energy, 40% of the global total of 227 EJ. Bytotal energy use by industry and on the fraction of electricity use consumed by motor driven systems was taken as representative of global

Bernstein, Lenny

2008-01-01T23:59:59.000Z

43

Cargo revenue management for space logistics  

E-Print Network [OSTI]

This thesis covers the development of a framework for the application of revenue management, specifically capacity control, to space logistics for use in the optimization of mission cargo allocations, which in turn affect ...

Armar, Nii A

2009-01-01T23:59:59.000Z

44

Industry  

SciTech Connect (OSTI)

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01T23:59:59.000Z

45

July 18, 2012 Qualified Energy Conservation Bond (QECB) Update: New  

E-Print Network [OSTI]

July 18, 2012 Qualified Energy Conservation Bond (QECB) Update: New Guidance from the U.S. Department of Treasury and the Internal Revenue Service Qualified Energy Conservation Bonds (QECBs a range of energy conservation projects at very attractive borrowing rates over long contract terms

46

Clean renewable energy bonds (CREBs) present a low-cost opportunity for public entities to issue bonds to finance  

E-Print Network [OSTI]

Clean renewable energy bonds (CREBs) present a low-cost opportunity for public entities to issue bonds to finance renewable energy projects. The federal government lowers the cost of debt by providing created under the Energy Tax Incentives Act of 2005 (and detailed in Internal Revenue Code Section 54

47

Equitable Carbon Revenue Distribution Under an International Emissions  

E-Print Network [OSTI]

No. 5 Equitable Carbon Revenue Distribution Under an International Emissions Trading Regime Nathan INSTITUTE University of Massachusetts Amherst #12;Equitable Carbon Revenue Distribution Under an International Emissions Trading Regime Nathan E. Hultman and Daniel M. Kammen Energy & Resources Group Goldman

Kammen, Daniel M.

48

Fact #619: April 19, 2010 Transportation Sector Revenue by Industry |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPCofConstructionofFY 2011 Report1:Energy 2: MarchDepartment of

49

"2013 Total Electric Industry- Revenue (Thousands Dollars)"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECSPropaneResidential" "(Data fromAverage

50

2013 Revenue for Delivery Service Providers  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQProved Reserves,0050516,"AL",10610,"Albertville Municipal UtilsResidential (Data fromRevenue

51

Mineral revenues: the 1983 report on receipts from Federal and Indian leases with summary data from 1920 to 1983  

SciTech Connect (OSTI)

Tables and figures abound for: mineral revenue management in 1983; offshore federal mineral revenues; onshore federal mineral revenues; Indian mineral revenues; distribution of federal and Indian mineral revenues; plus appended lease management data. (PSB)

Not Available

1984-01-01T23:59:59.000Z

52

The dynamics and strategic analysis of wireless communications technology in the healthcare industry  

E-Print Network [OSTI]

The healthcare industry like other industry is on the cross roads as a result of rising demand for healthcare delivery and service, the industry is facing declining revenues and increasing cost. As a result, one of the ...

Eyemaro, John K. (John Kingsley)

2006-01-01T23:59:59.000Z

53

Revenue From Contractor Fees | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energy fromComments onReplyofRetiring ProcurementReturn onRevenue From

54

2013 Non-Utility Power Producers- Revenue  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import CostsLiquids Reserve3. LightingImports35 2013 Flow5Revenue

55

Tracking and Using Data to Support Revenue Streams | Department...  

Energy Savers [EERE]

Documents & Publications Lender-Based Revenues and Cost-Savings Trends in Contractor Conversion Rates Better Buildings Residential Network: Lessons Learned: Peer Exchange Calls...

56

Reading the GL008 Revenue & Expense Activity report  

E-Print Network [OSTI]

Reading the GL008 Revenue & Expense Activity report Cognos FMS111 Reporting 7/23/13 - rb Reading the GL008 ­ job aid NEED HELP? Call 847-491-HELP consultant@northwestern.edu © 2013 Northwestern University Page 1 of 2 The GL008 Revenue and Expense Activity Report displays all transactions affecting

Shull, Kenneth R.

57

Revenue and Expense Activity (GL008) Enhancement Update  

E-Print Network [OSTI]

Cognos Revenue and Expense Activity (GL008) Enhancement Update GL008EnhancementsApril2012 Last Updated 5/7/2012 - mac © 2012 Northwestern University Cognos Reports 1 of 2 GL008 Enhancements for Sponsored Projects As of May 7, 2012, the Revenue and Expense Activity Report (GL008) has two enhancements

Shull, Kenneth R.

58

New approaches for integrating revenue and supply chain management  

E-Print Network [OSTI]

First, we describe a general framework called online customer selection that describes natural settings where suppliers must actively select which customer requests to serve. Unlike traditional revenue management models ...

Elmachtoub, Adam Nabil

2014-01-01T23:59:59.000Z

59

Investing in Bonds  

E-Print Network [OSTI]

Bonds, which are issued by governments and corporations, can be an important part of one's investment portfolio. U.S. government bonds, municipal bonds, zero-coupon bonds and other types are described. Also learn strategies for coping with inflation...

Johnson, Jason; Polk, Wade

2002-08-12T23:59:59.000Z

60

Industry Alliance Industry Alliance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industry Alliance Industry Alliance Clean, Sustainable Energy for the 21st Century Industry Alliance Industry Alliance Clean, Sustainable Energy for the 21st Century October, 2010...

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Peer Exchange Call on Financing and Revenue: Bond Funding | Department of  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdf MoreEnergyEnergy Amendment(a)

62

Revenue Maximization with Quality Assurance for Composite Web Services  

E-Print Network [OSTI]

Revenue Maximization with Quality Assurance for Composite Web Services Dani¨el Worm, Miroslav Abstract--Service composition is one of the major approaches in service oriented architecture (SOA) based systems. Due to the inherent stochastic nature of services execution environment the issue of composite

van der Mei, Rob

63

Classifying Web Search Queries to Identify High Revenue Generating Customers  

E-Print Network [OSTI]

searching, the set of terms for which a user searches is called the query. If a user enters a query and then clicks on a result, these query terms are embedded within the URL that is passed from the search engineClassifying Web Search Queries to Identify High Revenue Generating Customers Adan Ortiz-Cordova 329

Jansen, James

64

Total revenues up, profits down for OGJ400  

SciTech Connect (OSTI)

After moving up sharply the previous 2 years, profits for the biggest 400 U.S. public oil and gas companies sagged in fiscal 1989. The total: $20.34 billion, down 8.6% from 1988. Revenues, however, gained 6.1% to $459.2 billion. Company-by-company financial results and operating statistics appear in this report.

Beck, R.J.; Biggs, J.B.

1990-10-08T23:59:59.000Z

65

Alaska Electric Light&Power Co (Alaska) EIA Revenue and Sales...  

Open Energy Info (EERE)

EIA Monthly Electric Utility Sales and Revenue Data for Alaska Electric Light&Power Co for February 2009. Monthly Electric Utility Sales and Revenue Data Short Name 2009-02 Utility...

66

Alaska Electric Light&Power Co (Alaska) EIA Revenue and Sales...  

Open Energy Info (EERE)

Alaska) EIA Revenue and Sales - July 2008 Jump to: navigation, search EIA Monthly Electric Utility Sales and Revenue Data for Alaska Electric Light&Power Co for July 2008. Monthly...

67

Non-linear revenue creating business platform for IT service companies using cloud computing  

E-Print Network [OSTI]

The Indian Information Technology (IT) & Business process outsourcing (BPO) companies are going through an inflection point. They have been growing revenue by over 20% on a yearly basis for the last decade. This revenue ...

Sinha, Prasanta, S.M. Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

68

RUNTIME QoS CONTROL AND REVENUE OPTIMIZATION WITHIN SERVICE ORIENTED ARCHITECTURE.  

E-Print Network [OSTI]

RUNTIME QoS CONTROL AND REVENUE OPTIMIZATION WITHIN SERVICE ORIENTED ARCHITECTURE. Miroslav Zivkovic. #12;RUNTIME QoS CONTROL AND REVENUE OPTIMIZATION WITHIN SERVICE ORIENTED ARCHITECTURE Miroslav AND REVENUE OPTIMIZATION WITHIN SERVICE ORIENTED ARCHITECTURE PROEFSCHRIFT ter verkrijging van de graad van

van der Mei, Rob

69

Surety Bond Program (Maryland)  

Broader source: Energy.gov [DOE]

The Surety Bond Program, a program of the Maryland Small Business Development Financing Authority, assists eligible small businesses in obtaining bid, performance or payment bonds necessary to...

70

2007 Wholesale Power Rate Case Initial Proposal : Revenue Requirement Study.  

SciTech Connect (OSTI)

The purpose of this Study is to establish the level of revenues from wholesale power rates necessary to recover, in accordance with sound business principles, the Federal Columbia River Power System (FCRPS) costs associated with the production, acquisition, marketing, and conservation of electric power. The generation revenue requirement includes: recovery of the Federal investment in hydro generation, fish and wildlife and conservation costs; Federal agencies' operations and maintenance (O&M) expenses allocated to power; capitalized contract expenses associated with non-Federal power suppliers such as Energy Northwest (EN); other power purchase expenses, such as short-term power purchases; power marketing expenses; cost of transmission services necessary for the sale and delivery of FCRPS power; and all other generation-related costs incurred by the Administrator pursuant to law.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

71

Methods for generating or increasing revenues from crops  

DOE Patents [OSTI]

The present invention provides methods of doing business and providing services. For example, methods of increasing the revenue of crops are provided. To this end, the method includes the use of a nucleic acid sequences of plant centromeres. This will permit construction of stably inherited recombinant DNA constructs and mini chromosomes which can serve as vectors for the construction of transgenic plant and animal cells.

Copenhaver, Gregory P.; Keith, Kevin; Preuss, Daphne

2007-03-20T23:59:59.000Z

72

RFID Implementation in Retail Industry: Current Status, Issues, and Challenges  

E-Print Network [OSTI]

RFID Implementation in Retail Industry: Current Status, Issues, and Challenges Mithu Bhattacharya aggressive supporters of the technology. Frost & Sullivan reported that the revenue in the RFID retail market have such a timeline (National petroleum News, 2006). This raises the question why the retail industry

Mullen, Tracy

73

Bond Financing (New Jersey)  

Broader source: Energy.gov [DOE]

Bond financing is available to eligible businesses through the New Jersey Economic Development Authority, in the amount of $500,000 to $10 million. The bonds can be used to finance capital...

74

Oil revenue and economic development case of Libyan economy (1970-2007).  

E-Print Network [OSTI]

??This study aims to investigate different aspects of the relationship between oil revenues and economic development for the Libyan economy. To do so this thesis… (more)

Ali, Issa Saleh

2011-01-01T23:59:59.000Z

75

Alaska Electric Light&Power Co (Alaska) EIA Revenue and Sales...  

Open Energy Info (EERE)

November 2008 Jump to: navigation, search EIA Monthly Electric Utility Sales and Revenue Data for Alaska Electric Light&Power Co for November 2008. Monthly Electric Utility Sales...

76

Alaska Electric Light&Power Co (Alaska) EIA Revenue and Sales...  

Open Energy Info (EERE)

December 2008 Jump to: navigation, search EIA Monthly Electric Utility Sales and Revenue Data for Alaska Electric Light&Power Co for December 2008. Monthly Electric Utility Sales...

77

Exploring Opportunities for Energy Efficiency as a Revenue Stream in the Forward Capacity Markets  

Broader source: Energy.gov [DOE]

Provides information for energy efficiency programs on the opportunities and challenges associated with participating in forward capacity markets and reliability pricing models as potential revenue streams.

78

Bonding thermoplastic polymers  

DOE Patents [OSTI]

We demonstrate a new method for joining patterned thermoplastic parts into layered structures. The method takes advantage of case-II permeant diffusion to generate dimensionally controlled, activated bonding layers at the surfaces being joined. It is capable of producing bonds characterized by cohesive failure while preserving the fidelity of patterned features in the bonding surfaces. This approach is uniquely suited to production of microfluidic multilayer structures, as it allows the bond-forming interface between plastic parts to be precisely manipulated at micrometer length scales. The bond enhancing procedure is easily integrated in standard process flows and requires no specialized equipment.

Wallow, Thomas I. (Fremont, CA); Hunter, Marion C. (Livermore, CA); Krafcik, Karen Lee (Livermore, CA); Morales, Alfredo M. (Livermore, CA); Simmons, Blake A. (San Francisco, CA); Domeier, Linda A. (Danville, CA)

2008-06-24T23:59:59.000Z

79

Carbon Tax Revenue and the Budget Deficit: A Win-Win-Win Solution?  

E-Print Network [OSTI]

Bush-era tax cuts are scheduled to expire at the end of 2012, leading to interest in raising revenue through a carbon tax. This revenue could be used to either cut other taxes or to avoid cuts in Federal programs. There ...

Rausch, Sebastian

80

Maximizing Cloud Providers Revenues via Energy Aware Allocation Policies  

E-Print Network [OSTI]

Cloud providers, like Amazon, offer their data centers' computational and storage capacities for lease to paying customers. High electricity consumption, associated with running a data center, not only reflects on its carbon footprint, but also increases the costs of running the data center itself. This paper addresses the problem of maximizing the revenues of Cloud providers by trimming down their electricity costs. As a solution allocation policies which are based on the dynamic powering servers on and off are introduced and evaluated. The policies aim at satisfying the conflicting goals of maximizing the users' experience while minimizing the amount of consumed electricity. The results of numerical experiments and simulations are described, showing that the proposed scheme performs well under different traffic conditions.

Mazzucco, Michele; Deters, Ralph

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Maximising Revenue in the Airline Industry Under One-Way Pricing  

E-Print Network [OSTI]

the model's performance and further work to be carried out in this area. Context. The advent of .... scribed in the previous section. The cancellations ... No record is kept of cancellations and these could only be detected if the net number of bookings .... not performing as expected and further action is required. If the prices are ...

2003-10-08T23:59:59.000Z

82

Strategic Industrial Energy Efficiency: Reduce Expenses, Build Revenues, and Control Risk  

E-Print Network [OSTI]

Some manufacturing companies successfully boost their financial performance through optimized energy use. This leads not only to reduced energy consumption and associated environmental benefits, but also to capacity improvements that generate...

Russell, C.

2004-01-01T23:59:59.000Z

83

Trending: Metal Oxo Bonds  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

including materials science, chemistry, and biology. Highly covalent metal-oxygen multiple bonds (metal oxos) are the building blocks of metal oxides and have a bearing...

84

EnerNOC Inc. Commercial & Industrial Demand Response  

E-Print Network [OSTI]

Valley Authority C&I DR: 560 MW Tucson Electric Power C&I DR: 40 MW Xcel Energy (Colorado) C&I DR: 44 MW Baltimore Gas & Electric C&I DR:120 MW Bonneville Power Administration C&I DR: Multiple Pilots Delmarva with 2010 revenues of $280 million 500+ full-time employees Energy Efficiency Industrial EE Program

85

Industrial Permit  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Protection Obeying Environmental Laws Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the...

86

Qualified Energy Conservation Bonds (QECBs) - State Issues &...  

Broader source: Energy.gov (indexed) [DOE]

Qualified Energy Conservation Bonds (QECBs) - State Issues & Approaches Qualified Energy Conservation Bonds (QECBs) - State Issues & Approaches Qualified Energy Conservation Bonds...

87

Wafer-Level Thermocompression Bonds  

E-Print Network [OSTI]

Thermocompression bonding of gold is a promising technique for achieving low temperature, wafer-level bonding without the application of an electric field or complicated pre-bond cleaning procedure. The presence of a ductile ...

Tsau, Christine H.

88

Modelling the performance of revenue management systems in different competitive environments  

E-Print Network [OSTI]

In the wake of contemporary widespread fare simplification in many major airline markets, this thesis is concerned with the possibilities and the potential for airline revenue management in less-differentiated fare ...

Dar, Maital

2006-01-01T23:59:59.000Z

89

Alaska Electric Light&Power Co (Alaska) EIA Revenue and Sales...  

Open Energy Info (EERE)

August 2008. Monthly Electric Utility Sales and Revenue Data Short Name 2008-08 Utility Company Alaska Electric Light&Power Co (Alaska) Place Alaska Start Date 2008-08-01 End Date...

90

Tradeoffs between revenue enhancements and emissions reductions with energy storage-coupled photovoltaics  

E-Print Network [OSTI]

Energy storage has the potential to dramatically change the operation of photovoltaics by allowing for a delay between generation and use. This flexibility has the potential to impact both the revenue from generating ...

Heidel, Timothy David

2009-01-01T23:59:59.000Z

91

Low Temperature Material Bonding Technique  

DOE Patents [OSTI]

A method of performing a lower temperature bonding technique to bond together two mating pieces of glass includes applying a sodium silicate aqueous solution between the two pieces.

Ramsey, J. Michael (Knoxville, TN); Foote, Robert S. (Oak Ridge, TN)

2000-10-10T23:59:59.000Z

92

Low temperature material bonding technique  

DOE Patents [OSTI]

A method of performing a lower temperature bonding technique to bond together two mating pieces of glass includes applying a sodium silicate aqueous solution between the two pieces.

Ramsey, J. Michael (Knoxville, TN); Foote, Robert S. (Oak Ridge, TN)

2002-02-12T23:59:59.000Z

93

Federal Offshore Statistics, 1993. Leasing, exploration, production, and revenue as of December 31, 1993  

SciTech Connect (OSTI)

This document contains statistical data on the following: federal offshore lands; offshore leasing activity and status; offshore development activity; offshore production of crude oil and natural gas; federal offshore oil and natural gas sales volume and royalties; revenue from federal offshore leases; disbursement of federal offshore revenue; reserves and resource estimates of offshore oil and natural gas; oil pollution in US and international waters; and international activities and marine minerals. A glossary is included.

Francois, D.K.

1994-12-31T23:59:59.000Z

94

The impact of federal revenue sharing on recreation and parks in Texas  

E-Print Network [OSTI]

to return power to the people and strengthen the state and local partners in our federal system. . ~ . a New Fed- eralism. " (Department of the Treasury, 1974a: 1) Revenue Sharing goes a step beyond block grants in giving states and localities autonomy... December 1974 Major Subject& Recreation and Resources Development THE Il&PACT OF FEDERAL REVENUE SHARING ON RECREATION AND PARKS IN TEXAS A Thesis by SYDNEY HENRY VERINDER Approved as to style and content by: ai . an of' Committee . ead...

Verinder, Sydney Henry

1974-01-01T23:59:59.000Z

95

Green Infrastructure Bonds (Hawaii)  

Broader source: Energy.gov [DOE]

In July 2013, Hawaii enacted legislation allowing the Department of Business, Economic Development, and Tourism to issue Green Infrastructure Bonds to secture low-cost financing for clean energy...

96

Bonding aerogels with polyurethanes  

SciTech Connect (OSTI)

Aerogels, porous silica glasses with ultra-fine cell size (30nm), are made by a solution gelation (sol-gel) process. The resulting gel is critical point dried to densities from 0.15--0.60 g/cc. This material is machinable, homogeneous, transparent, coatable and bondable. To bond aerogel an adhesive should have long cure time, no attack on the aerogel structure, and high strength. Several epoxies and urethanes were examined to determine if they satisfied these conditions. Bond strengths above 13 psi were found with double bubble and DP-110 epoxies and XI-208/ODA-1000 and Castall U-2630 urethanes. Hardman Kalex Tough Stuff'' A-85 hardness urethane gave 18 psi bond strength. Hardman A-85, Tuff-Stuff'' was selected for further evaluation because it produced bond strengths comparable to the adherend cohesive strength. 5 refs., 2 figs.

Matthews, F.M.; Hoffman, D.M.

1989-11-01T23:59:59.000Z

97

Water's Hydrogen Bond Strength  

E-Print Network [OSTI]

Water is necessary both for the evolution of life and its continuance. It possesses particular properties that cannot be found in other materials and that are required for life-giving processes. These properties are brought about by the hydrogen bonded environment particularly evident in liquid water. Each liquid water molecule is involved in about four hydrogen bonds with strengths considerably less than covalent bonds but considerably greater than the natural thermal energy. These hydrogen bonds are roughly tetrahedrally arranged such that when strongly formed the local clustering expands, decreasing the density. Such low density structuring naturally occurs at low and supercooled temperatures and gives rise to many physical and chemical properties that evidence the particular uniqueness of liquid water. If aqueous hydrogen bonds were actually somewhat stronger then water would behave similar to a glass, whereas if they were weaker then water would be a gas and only exist as a liquid at sub-zero temperatures. The overall conclusion of this investigation is that water's hydrogen bond strength is poised centrally within a narrow window of its suitability for life.

Martin Chaplin

2007-06-10T23:59:59.000Z

98

Financial sustainability in municipal solid waste management – Costs and revenues in Bahir Dar, Ethiopia  

SciTech Connect (OSTI)

Highlights: • Cost-revenue analysis over 2 years revealed insufficient cost-recovery. • Expenses for motorized secondary collection increased by 82% over two years. • Low fee collection rate and reliance on only one revenue stream are problematic. • Different options for cost reduction and enhanced revenue streams are recommended. • Good public–private alliance is crucial to plan and implement improvement measures. - Abstract: Providing good solid waste management (SWM) services while also ensuring financial sustainability of the system continues to be a major challenge in cities of developing countries. Bahir Dar in northwestern Ethiopia outsourced municipal waste services to a private waste company in 2008. While this institutional change has led to substantial improvement in the cleanliness of the city, its financial sustainability remains unclear. Is the private company able to generate sufficient revenues from their activities to offset the costs and generate some profit? This paper presents a cost-revenue analysis, based on data from July 2009 to June 2011. The analysis reveals that overall costs in Bahir Dar’s SWM system increased significantly during this period, mainly due to rising costs related to waste transportation. On the other hand, there is only one major revenue stream in place: the waste collection fee from households, commercial enterprises and institutions. As the efficiency of fee collection from households is only around 50%, the total amount of revenues are not sufficient to cover the running costs. This results in a substantial yearly deficit. The results of the research therefore show that a more detailed cost structure and cost-revenue analysis of this waste management service is important with appropriate measures, either by the privates sector itself or with the support of the local authorities, in order to enhance cost efficiency and balance the cost-revenues towards cost recovery. Delays in mitigating the evident financial deficit could else endanger the public-private partnership (PPP) and lead to failure of this setup in the medium to long term, thus also endangering the now existing improved and currently reliable service. We present four options on how financial sustainability of the SWM system in Bahir Dar might be enhanced: (i) improved fee collection efficiency by linking the fees of solid waste collection to water supply; (ii) increasing the value chain by sales of organic waste recycling products; (iii) diversifying revenue streams and financing mechanisms (polluter-pays-, cross-subsidy- and business-principles); and (iv) cost reduction and improved cost-effectiveness. We argue that in a PPP setup such as in Bahir Dar, a strong alliance between the municipality and private enterprise is important so that appropriate solutions for improved financial sustainability of a SWM system can be sought and implemented.

Lohri, Christian Riuji, E-mail: christian.lohri@eawag.ch; Camenzind, Ephraim Joseph, E-mail: ephraimcamenzind@hotmail.com; Zurbrügg, Christian, E-mail: christian.zurbruegg@eawag.ch

2014-02-15T23:59:59.000Z

99

Estimating the maximum potential revenue for grid connected electricity storage : arbitrage and regulation.  

SciTech Connect (OSTI)

The valuation of an electricity storage device is based on the expected future cash ow generated by the device. Two potential sources of income for an electricity storage system are energy arbitrage and participation in the frequency regulation market. Energy arbitrage refers to purchasing (stor- ing) energy when electricity prices are low, and selling (discharging) energy when electricity prices are high. Frequency regulation is an ancillary service geared towards maintaining system frequency, and is typically procured by the independent system operator in some type of market. This paper outlines the calculations required to estimate the maximum potential revenue from participating in these two activities. First, a mathematical model is presented for the state of charge as a function of the storage device parameters and the quantities of electricity purchased/sold as well as the quantities o ered into the regulation market. Using this mathematical model, we present a linear programming optimization approach to calculating the maximum potential revenue from an elec- tricity storage device. The calculation of the maximum potential revenue is critical in developing an upper bound on the value of storage, as a benchmark for evaluating potential trading strate- gies, and a tool for capital nance risk assessment. Then, we use historical California Independent System Operator (CAISO) data from 2010-2011 to evaluate the maximum potential revenue from the Tehachapi wind energy storage project, an American Recovery and Reinvestment Act of 2009 (ARRA) energy storage demonstration project. We investigate the maximum potential revenue from two di erent scenarios: arbitrage only and arbitrage combined with the regulation market. Our analysis shows that participation in the regulation market produces four times the revenue compared to arbitrage in the CAISO market using 2010 and 2011 data. Then we evaluate several trading strategies to illustrate how they compare to the maximum potential revenue benchmark. We conclude with a sensitivity analysis with respect to key parameters.

Byrne, Raymond Harry; Silva Monroy, Cesar Augusto.

2012-12-01T23:59:59.000Z

100

Airline network seat inventory control : methodologies and revenue impacts  

E-Print Network [OSTI]

In the airline industry, it is customary for carriers to offer a wide range of fares for any given seat in the same cabin on the same flight. In order to control the number of seats made available in each fare class, ...

Williamson, Elizabeth Louise

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

November 15, 2012 Webinar: Exploring Opportunities for Energy Efficiency as a Revenue Stream in the Forward Capacity Markets  

Broader source: Energy.gov [DOE]

November 15, 2012 Webinar: Exploring Opportunities for Energy Efficiency as a Revenue Stream in the Forward Capacity Markets, Better Buildings Neighborhood Program; regional transmission organizations (RTOs)

102

Industrial Engineering Industrial Advisory Board  

E-Print Network [OSTI]

Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

Gelfond, Michael

103

Thread bonds in molecules  

E-Print Network [OSTI]

Unusual chemical bonds are proposed. Each bond is almost covalent but is characterized by the thread of a small radius $\\sim 0.6\\times 10^{-11}$cm, between two nuclei in a molecule. The main electron density is concentrated outside the thread as in a covalent bond. The thread is formed by the electron wave function which has a tendency to be singular on it. The singularity along the thread is cut off by electron "vibrations" due to the interaction with zero point electromagnetic oscillations. The electron energy has its typical value of (1-10)eV. Due to the small tread radius the uncertainty of the electron momentum inside the thread is large resulting in a large electron kinetic energy $\\sim 1 MeV$. This energy is compensated by formation of a potential well due to the reduction of the energy of electromagnetic zero point oscillations. This is similar to formation of a negative van der Waals potential. Thread bonds are stable and cannot be created or destructed in chemical or optical processes.

Ivlev, B

2015-01-01T23:59:59.000Z

104

Economic Development Bond Program (Iowa)  

Broader source: Energy.gov [DOE]

Through its Economic Development Bond Program, the Iowa Finance Authority (IFA) issues tax-exempt bonds on behalf of private entities or organizations for eligible purposes. The responsibility for...

105

Private Activity Bond Allocation (Missouri)  

Broader source: Energy.gov [DOE]

The Private Activity Bond Allocation Program provides low-interest financing through tax-exempt bonds for certain types of projects, including electric and gas utility projects. Eligible applicants...

106

Albert Bond | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Bond - Project Officer, Golden Field Office Albert Bond is a Project Officer at the Golden Field Office. Most Recent New Choctaw Nation Recycling Center Posts Quick Results March 8...

107

Bond and Loan Program (Arkansas)  

Broader source: Energy.gov [DOE]

The Bond and Loan programs of Arkansas are four programs designed to attract small business development within the state.

108

Can refiners successfully extend revenue streams through petrochemicals?  

SciTech Connect (OSTI)

The petrochemical industry is actually an outgrowth of the need for new types of materials throughout the world. A recent estimate places the requirements for infra-structure investment (public works, housing, power, etc.) in developing Asia for the period 1995-2004 at $1.4 trillion. New petrochemical derived materials for construction will be required in record numbers to meet this need. For example, the use of fiber reinforced plastics will have a substantial potential in construction. Other chemically resistant materials have wide applications in humid, corrosive environments and could therefore find markets worldwide. Other sectors such as telecommunications, power plants and transportation are also areas of potential commercial applications for petrochemical derived materials. For refinery-based petrochemicals such as ethylene, the world`s largest volume organic chemical, and for aromatics and propylene, the building blocks for so many modern materials, these circumstances present challenges, risks, but perhaps most of all opportunity.

Gonzalez, R.G. [ed.

1997-04-01T23:59:59.000Z

109

A Study of Revenue Flows in Packet Networks under Multiple Administrative Domains  

E-Print Network [OSTI]

A Study of Revenue Flows in Packet Networks under Multiple Administrative Domains Saadullah Tareenx that they usually only consider a single network and always consider a single administrative domain when for a detailed study of more realistic networks under multiple administrative domains. The interac- tions between

110

Tax-versus-trading and efficient revenue recycling as issues for greenhouse gas abatement  

E-Print Network [OSTI]

Tax-versus-trading and efficient revenue recycling as issues for greenhouse gas abatement Final abatement, using the first multi-party model to include both tax-versus-trading under uncertainties of an emissions tax over emissions (permit) trading in handling abatement-cost uncertainties, from that shown

Pezzey, Jack

111

Revenue Maximization in Reservation-based Online Advertising Through Dynamic Inventory  

E-Print Network [OSTI]

Revenue Maximization in Reservation-based Online Advertising Through Dynamic Inventory Management inventory on content sites owned by publishers (e.g., CNN, amazon, etc.). Sales representatives, acting on behalf of publishers, sell inventory (impression) bundles of various types (text, video, multimedia, etc

Tomkins, Andrew

112

Semi-Markov Adaptive Critic Heuristics with Application to Airline Revenue Management  

E-Print Network [OSTI]

Semi-Markov Adaptive Critic Heuristics with Application to Airline Revenue Management Ketaki Management and Systems Engineering Missouri University of Science and Technology Rolla, MO 65409 Abstract the time spent in each transition of the underlying Markov chains is itself a random variable

Gosavi, Abhijit

113

Assessing the Impact of Heat Rejection Technology on CSP Plant Revenue: Preprint  

SciTech Connect (OSTI)

This paper explores the impact of cooling technology on revenue for hybrid-cooled plants with varying wet cooling penetration for four representative locations in the American Southwest. The impact of ACC design-point initial temperature difference (ITD - the difference between the condensing steam temperature and ambient dry-bulb) is also included in the analysis.

Wagner, M. J.; Kutscher, C. F.

2010-10-01T23:59:59.000Z

114

Company Name: Tighe & Bond, Inc. Web Site: www.tighebond.com  

E-Print Network [OSTI]

Company Name: Tighe & Bond, Inc. Web Site: www.tighebond.com Industry: Engineering Brief Company Business. Majors they typically recruit: Civil Engineering, Earth Sciences Do they offer internships: Yes in civil, geotechnical and environmental engineering, environmental science, hydrogeology and geographic

New Hampshire, University of

115

Experimental and Theoretical Examination of C-CN Bond Activation of Benzonitrile Using Zerovalent Nickel  

E-Print Network [OSTI]

are important in industrial petroleum refining.1 The transition metal catalyzed activation of C-C bonds has been used in organic synthesis, for which the beneficial features of atom economy and chemoselectivity have

Jones, William D.

116

EIS-0123: Direct Service Industry Options  

Broader source: Energy.gov [DOE]

BPA proposes to implement one or more options to reduce load fluctuations and revenue uncertainty resulting from its electrical service to 10 aluminum smelters and its other direct service industrial customers. BPA believes these options will give BPA greater ability to plan for power needs and help to maintain its relatively strong financial position during the current period of power surplus. They also are expected to enhance BPA's ability to repay the U.S. Treasury. In turn, BPA rates to other customers would stabilize.

117

Trending: Metal Oxo Bonds  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatusButlerTransportation From modelingTrending: Metal Oxo Bonds

118

Solder extrusion pressure bonding process and bonded products produced thereby  

DOE Patents [OSTI]

Disclosed is a process for production of soldered joints which are highly reliable and capable of surviving 10,000 thermal cycles between about [minus]40 C and 110 C. Process involves interposing a thin layer of a metal solder composition between the metal surfaces of members to be bonded and applying heat and up to about 1000 psi compression pressure to the superposed members, in the presence of a reducing atmosphere, to extrude the major amount of the solder composition, contaminants including fluxing gases and air, from between the members being bonded, to form a very thin, strong intermetallic bonding layer having a thermal expansion tolerant with that of the bonded members.

Beavis, L.C.; Karnowsky, M.M.; Yost, F.G.

1992-06-16T23:59:59.000Z

119

Solder extrusion pressure bonding process and bonded products produced thereby  

DOE Patents [OSTI]

Production of soldered joints which are highly reliable and capable of surviving 10,000 thermal cycles between about -40.degree. C. and 110.degree. C. Process involves interposing a thin layer of a metal solder composition between the metal surfaces of members to be bonded and applying heat and up to about 1000 psi compression pressure to the superposed members, in the presence of a reducing atmosphere, to extrude the major amount of the solder composition, contaminants including fluxing gases and air, from between the members being bonded, to form a very thin, strong intermetallic bonding layer having a thermal expansion tolerant with that of the bonded members.

Beavis, Leonard C. (Albuquerque, NM); Karnowsky, Maurice M. (Albuquerque, NM); Yost, Frederick G. (Ceder Crest, NM)

1992-01-01T23:59:59.000Z

120

Qualified Energy Conservation Bonds (Ohio)  

Broader source: Energy.gov [DOE]

The Ohio Air Quality Development Authority (OAQDA) administers the Qualified Energy Conservation Bonds (QECB) program in Ohio. QECBs have been used by local governments and public universities to...

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Investigation of bonding strength and sealing behavior of aluminum/stainless steel bonded at room temperature  

E-Print Network [OSTI]

], spark welding [3], explosive bonding [4], and diffusion bonding [5,6]. However, the processing such as diffusion bonding [5,6], friction welding [7e11], vacuum roll bonding [12] and hot roll bonding [13Investigation of bonding strength and sealing behavior of aluminum/stainless steel bonded at room

Howlader, Matiar R

122

Bonding Low-density Nanoporous Metal Foams Using Sputtered Solder  

SciTech Connect (OSTI)

A method has been developed for bonding low-density nanoporous metal foam components to a substrate using solder that is sputtered onto the surfaces. Metal foams have unusual properties that make them excellent choices for many applications, and as technologies for processing these materials are evolving, their use in industry is increasing dramatically. Metal foams are lightweight and have advantageous dynamic properties, which make them excellent choices for many structural applications. They also provide good acoustic damping, low thermal conductivity, and excellent energy absorption characteristics. Therefore, these materials are commonly used in the automotive, aerospace, construction, and biomedical industries. The synthesis of nanoporous metal foams with a cell size of less then 1 {micro}m is an emerging technology that is expected to lead to widespread application of metal foams in microdevices, such as sensors and actuators. One of the challenges to manufacturing components from metal foams is that they can be difficult to attach to other structures without degrading their properties. For example, traditional liquid adhesives cannot be used because they are absorbed into foams. The problem of bonding or joining can be particularly difficult for small-scale devices made from nanoporous foam, due to the requirement for a thin bond layer. The current study addresses this problem and develops a method of soldering a nanoporous metal foam to a substrate with a bond thickness of less than 2 {micro}m. There are many applications that require micro-scale metal foams precisely bonded to substrates. This study was motivated by a physics experiment that used a laser to drive a shock wave through an aluminum foil and into a copper foam, in order to determine the speed of the shock in the copper foam. To avoid disturbing the shock, the interface between the copper foam and the aluminum substrate had to be as thin as possible. There are many other applications that could benefit from the bonding technology developed in this study, such as small-scale lightweight structural members, high-strength thermal insulating layers for electronics, and micro-scale mechanical dampers, to name but a few. Each of these applications requires one or more small metal foam components precisely bonded to a substrate. Several methods for bonding metal foam components have been developed by previous researchers. Macroscopic metal foam parts have been successfully bonded by laser welding to create T-sections and butt joints. Ultrasonic welding has been used to join aluminum sheet metal to aluminum foam for structural applications. These methods work well for bonding large foam components, but reducing these methods to a smaller length scale would be challenging. One method that has shown great potential for bonding layers of metal foams to substrates is a brazing process that uses a sputter-deposited interface material. Shirzadi et al.[9] have demonstrated bonds between stainless steel foam and a stainless steel substrate using a layer of copper-titanium filler metal that is sputtered onto the interface surfaces. The foam pieces that they bonded were approximately 10 mm in diameter and 10 mm thick with a cell size of approximately 200 {micro}m. After depositing the filler material, pressing the materials together, and heating them with an induction heater, bonds were achieved without causing significant damage to the foam. The current study also uses a sputter-deposited interface material to bond foam to a substrate. However, in contrast to previous work, the current study examines bonding microscale pieces of fragile nanoporous metal foam. In this study, a method is developed to bond a thin sheet of fragile, low-density nanoporous copper foam to an aluminum foil substrate of thickness 40 {micro}m. By sputter depositing an indium-silver alloy onto the foam and the substrate, a solder joint with a thickness of less than 2 {micro}m was achieved.

Bono, M; Cervantes, O; Akaba, C; Hamza, A; Foreman, R; Teslich, N

2007-08-21T23:59:59.000Z

123

Tax-Exempt Bond Financing for Nonprofit Organizations and Industries |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesign & RemodelingEnergy VersionDepartment

124

Federal offshore statistics: 1992. Leasing, exploration, production, and revenues as of December 31, 1992  

SciTech Connect (OSTI)

The Outer Continental Shelf Lands Act, enacted in 1953 and amended several times, charges the Secretary of the Interior with the responsibility for administering and managing mineral exploration and development of the outer continental shelf, as well as for conserving its natural resources. This report documents the following: Federal offshore lands; offshore leasing activity and status; offshore development activity; offshore production of crude oil and natural gas; Federal offshore oil and natural gas sales volume and royalties; revenue from Federal offshore leases; disbursement of Federal offshore revenue; reserves and resource estimates of offshore oil and natural gas; oil pollution in US and international waters; and international activities and marine minerals. 11 figs., 83 tabs.

Francois, D.K.

1993-12-31T23:59:59.000Z

125

Esthetically Designed Municipal PV System Maximizes Energy Production and Revenue Return  

Broader source: Energy.gov [DOE]

In late 2008, the City of Sebastopol, CA installed a unique 42 kW grid-interactive photovoltaic (PV) system to provide electricity for pumps of the Sebastopol municipal water system. The resulting innovative Sun Dragon PV system, located in a public park, includes design elements that provide optimized electrical performance and revenue generation for the energy produced while also presenting an artistic and unique appearance to park visitors.

126

Effect of oil revenue on the fertility pattern in Iran, 1952-1976  

SciTech Connect (OSTI)

Counter to expectation based on the experience of developed nations, in Iran the increase of oil revenue from 1952 to 1975 was not accompanied by a decline in the fertility rate. To identify possible determinants of fertility behavior, the following hypotheses were tested: 1) developmental factors such as urbanization, high school or higher education of females, types of occupation and female labor force participation, have a direct negative impact; 2) the developmental variables have an indirect negative effect on fertility through the mean age at first marriage; 3) mean age at first marriage has a direct negative effect on fertility; and 4) in the provinces (Central, Khuzestan, Esfahan, E. Azarbijan) where large amounts of oil revenue was allocated, the fertility rate is lower than the fertility rate in other provinces where small amounts of oil revenue were distributed. Among developmental variables, high school and college education of females aged 15-29 as well as mean age at first marriage of females, or, lower proportion of married females age 20-24 were found to be important factors in depressing the fertility rate.

Nassirpour, M.

1984-01-01T23:59:59.000Z

127

Industrial Hygienist  

Broader source: Energy.gov [DOE]

A successful candidate in this position wil l serve as an Industrial Hygienist in the Operations Division, providing technical oversight of the Pacific Northwest National Laboratory contractors...

128

Quantum Confinement in Hydrogen Bond  

E-Print Network [OSTI]

In this work, the quantum confinement effect is proposed as the cause of the displacement of the vibrational spectrum of molecular groups that involve hydrogen bonds. In this approach the hydrogen bond imposes a space barrier to hydrogen and constrains its oscillatory motion. We studied the vibrational transitions through the Morse potential, for the NH and OH molecular groups inside macromolecules in situation of confinement (when hydrogen bonding is formed) and non-confinement (when there is no hydrogen bonding). The energies were obtained through the variational method with the trial wave functions obtained from Supersymmetric Quantum Mechanics (SQM) formalism. The results indicate that it is possible to distinguish the emission peaks related to the existence of the hydrogen bonds. These analytical results were satisfactorily compared with experimental results obtained from infrared spectroscopy.

Santos, Carlos da Silva dos; Ricotta, Regina Maria

2015-01-01T23:59:59.000Z

130

An Assessment of the Economic Importance of the San Carlos Island Shrimp Processing Industry to the Lee County Economy  

E-Print Network [OSTI]

to the Lee County Economy Chuck Adams, David Mulkey, and Alan Hodges Food and Resource Economics Department the shrimp processing industry on San Carlos Island contributes to the Lee County economy. Most of the shrimp of the revenues earned on a trip are spent within the Lee County economy. During seasons when shrimp landings

Florida, University of

131

Reshaping the electricity supply industry  

SciTech Connect (OSTI)

Cigre`s Electra magazine published this interview with Alfonso Limbruno, CEO of ENEL S.p.A. To put the interview in perspective, this article begins with a brief overview of ENEL and a biographical sketch of Alfonso Limbruno, and also carries comments from Y. Thomas, secretary general of CIGRE. ENEL is a vertically integrated nationwide electricity company engaged in the generation, transmission, distribution, and sale of electricity, predominantly in Italy. ENEL`s share accounts for approximately 80 percent of Italian electricity demand. Measured by amount of electricity sold, ENEL is the third largest electric utility in the OECD countries and the second largest electric utility in Europe. Measured by revenues, ENEL is one of the largest companies in Italy, with a turnover of Lit. 37,632 billion. In 1995, ENEL served approximately 28.5 million customers and sold 211,607 GWh of electricity. ENEL`s gross installed generating capacity at December 31, 1995 was 55,906 MW. Alfonso Limbruno made all his career in the Italian electricity supply industry (ESI) and has had quite a unique experience: he went through a complete cycle of change of the ESI in his country, the nationalization of the sector in 1962 with the merging in ENEL of over 1,200 undertakings, and now the privatization of the company, along with a far reaching restructuring of the industry. He was appointed CEO of ENEL in August 1992.

NONE

1997-03-01T23:59:59.000Z

132

Method for vacuum fusion bonding  

DOE Patents [OSTI]

An improved vacuum fusion bonding structure and process for aligned bonding of large area glass plates, patterned with microchannels and access holes and slots, for elevated glass fusion temperatures. Vacuum pumpout of all components is through the bottom platform which yields an untouched, defect free top surface which greatly improves optical access through this smooth surface. Also, a completely non-adherent interlayer, such as graphite, with alignment and location features is located between the main steel platform and the glass plate pair, which makes large improvements in quality, yield, and ease of use, and enables aligned bonding of very large glass structures.

Ackler, Harold D. (Sunnyvale, CA); Swierkowski, Stefan P. (Livermore, CA); Tarte, Lisa A. (Livermore, CA); Hicks, Randall K. (Stockton, CA)

2001-01-01T23:59:59.000Z

133

Fusion bonding and alignment fixture  

DOE Patents [OSTI]

An improved vacuum fusion bonding structure and process for aligned bonding of large area glass plates, patterned with microchannels and access holes and slots, for elevated glass fusion temperatures. Vacuum pumpout of all the components is through the bottom platform which yields an untouched, defect free top surface which greatly improves optical access through this smooth surface. Also, a completely non-adherent interlayer, such as graphite, with alignment and location features is located between the main steel platform and the glass plate pair, which makes large improvements in quality, yield, and ease of use, and enables aligned bonding of very large glass structures.

Ackler, Harold D. (Sunnyvale, CA); Swierkowski, Stefan P. (Livermore, CA); Tarte, Lisa A. (Livermore, CA); Hicks, Randall K. (Stockton, CA)

2000-01-01T23:59:59.000Z

134

Method of bonding  

DOE Patents [OSTI]

1. A method of making a fuel-containing structure for nuclear reactors, comprising providing an assembly comprising a plurality of fuel units; each fuel unit consisting of a core plate containing thermal-neutron-fissionable material, sheets of cladding metal on its bottom and top surfaces, said cladding sheets being of greater width and length than said core plates whereby recesses are formed at the ends and sides of said core plate, and end pieces and first side pieces of cladding metal of the same thickness as the core plate positioned in said recesses, the assembly further comprising a plurality of second side pieces of cladding metal engaging the cladding sheets so as to space the fuel units from one another, and a plurality of filler plates of an acid-dissolvable nonresilient material whose melting point is above 2000.degree. F., each filler plate being arranged between a pair of said second side pieces and the cladding plates of two adjacent fuel units, the filler plates having the same thickness as the second side pieces; the method further comprising enclosing the entire assembly in an envelope; evacuating the interior of the entire assembly through said envelope; applying inert gas under a pressure of about 10,000 psi to the outside of said envelope while at the same time heating the assembly to a temperature above the flow point of the cladding metal but below the melting point of any material of the assembly, whereby the envelope is pressed against the assembly and integral bonds are formed between plates, sheets, first side pieces, and end pieces and between the sheets and the second side pieces; slowly cooling the assembly to room temperature; removing the envelope; and dissolving the filler plates without attacking the cladding metal.

Saller, deceased, Henry A. (late of Columbus, OH); Hodge, Edwin S. (Columbus, OH); Paprocki, Stanley J. (Columbus, OH); Dayton, Russell W. (Columbus, OH)

1987-12-01T23:59:59.000Z

135

New Clean Renewable Energy Bonds | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

New Clean Renewable Energy Bonds New Clean Renewable Energy Bonds New clean renewable energy bonds (CREBs) are tax credit bonds, the proceeds of which are used for capital...

136

Qualified Energy Conservation Bonds (QECBs) & New Clean Renewable...  

Energy Savers [EERE]

Qualified Energy Conservation Bonds (QECBs) & New Clean Renewable Energy Bonds (New CREBs) Qualified Energy Conservation Bonds (QECBs) & New Clean Renewable Energy Bonds (New...

137

Expenses Revenues  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicy and Assistance100 tonusingdeposition.EnergyExpedited6 ARMExpenses

138

Low Temperature Material Bonding Techniq Ue  

DOE Patents [OSTI]

A method of performing a lower temperature bonding technique to bond together two mating pieces of glass includes applying a sodium silicate aqueous solution between the two pieces.

Ramsey, J. Michael (Knoxville, TN); Foote, Robert S. (Oak Ridge, TN)

2002-08-06T23:59:59.000Z

139

Pooled Bond Program (South Dakota)  

Broader source: Energy.gov [DOE]

The Pooled Bond Program offered by the Economic Development Finance Authority is designed for capital intensive projects, providing small businesses access to larger capital markets for tax-exempt...

140

Adhesion, Atomic Structure, and Bonding at theAdhesion, Atomic Structure, and Bonding at the ----AlAl22OO33(0001)/Al(111) Interface:(0001)/Al(111) Interface  

E-Print Network [OSTI]

Adhesion, Atomic Structure, and Bonding at theAdhesion, Atomic Structure, and Bonding at the ----AlAl22OO33(0001)/Al(111) Interface:(0001)/Al(111) Interface: A First Principles StudyA First Principles--ceramic interfaces are ubiquitous in many industrial applications: ­ Microelectronics ­ Al and other metals

Adams, James B

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Revenue from Retail Sales of Electricity (Thousand Dollars) by State by Provider  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECS Survey Data 2010Feet) Year53 2.370 2.359 2.342Revenue

142

CONVERTIBLE BONDS IN A DEFAULTABLE DIFFUSION MODEL  

E-Print Network [OSTI]

CONVERTIBLE BONDS IN A DEFAULTABLE DIFFUSION MODEL Tomasz R. Bielecki Department of Applied Research Grant PS12918. #12;2 Convertible Bonds in a Defaultable Diffusion Model 1 Introduction In [4), such as Convertible Bonds (CB), and we provided a rigorous decomposition of a CB into a bond component and a (game

Jeanblanc, Monique

143

Three methods to measure RH bond energies  

SciTech Connect (OSTI)

In this paper the authors compare and contrast three powerful methods for experimentally measuring bond energies in polyatomic molecules. The methods are: radical kinetics; gas phase acidity cycles; and photoionization mass spectroscopy. The knowledge of the values of bond energies are a basic piece of information to a chemist. Chemical reactions involve the making and breaking of chemical bonds. It has been shown that comparable bonds in polyatomic molecules, compared to the same bonds in radicals, can be significantly different. These bond energies can be measured in terms of bond dissociation energies.

Berkowitz, J. [Argonne National Lab., IL (United States); Ellison, G.B. [Univ. of Colorado, Boulder, CO (United States). Dept. of Chemistry and Biochemistry; Gutman, D. [Catholic Univ. of America, Washington, DC (United States). Dept. of Chemistry

1993-03-21T23:59:59.000Z

144

Ideally Glassy Hydrogen Bonded Networks  

E-Print Network [OSTI]

The axiomatic theory of ideally glassy networks, which has proved effective in describing phase diagrams and properties of chalcogenide and oxide glasses and their foreign interfaces, is broadened here to include intermolecular interactions in hydrogen-bonded polyalcohols such as glycerol, monosaccharides (glucose), and the optimal bioprotective hydrogen-bonded disaccharide networks formed from trehalose. The methods of Lagrangian mechanics and Maxwellian scaffolds are useful at the molecular level when bonding hierarchies are characterized by constraint counting similar to the chemical methods used by Huckel and Pauling. Whereas Newtonian molecular dynamical methods are useful for simulating large-scale interactions for times of order 10 ps, constraint counting describes network properties on glassy (almost equilibrated) time scales, which may be of cosmological order for oxide glasses, or years for trehalose. The ideally glassy network of trehalose may consist of extensible tandem sandwich arrays.

J. C. Phillips

2005-08-05T23:59:59.000Z

145

Bonded polyimide fuel cell package  

DOE Patents [OSTI]

Described herein are processes for fabricating microfluidic fuel cell systems with embedded components in which micron-scale features are formed by bonding layers of DuPont Kapton.TM. polyimide laminate. A microfluidic fuel cell system fabricated using this process is also described.

Morse, Jeffrey D.; Jankowski, Alan; Graff, Robert T.; Bettencourt, Kerry

2010-06-08T23:59:59.000Z

146

Non-bonded ultrasonic transducer  

DOE Patents [OSTI]

A mechanically assembled non-bonded ultrasonic transducer includes a substrate, a piezoelectric film, a wetting agent, a thin metal electrode, and a lens held in intimate contact by a mechanical clamp. No epoxy or glue is used in the assembly of this device.

Eoff, J.M.

1984-07-06T23:59:59.000Z

147

Who is winning the cell-phone wars? Answer: it depends how you count. Units, market share, revenue, profit.  

E-Print Network [OSTI]

Who is winning the cell-phone wars? Answer: it depends how you count. Units, market share, revenue launched. According to another analyst, Cannaccord, Apple now has four percent of the cell-phone market quarter, not that far off a million a day. iPhone sales increased by 4 million but its market share

South Bohemia, University of

148

Better Buildings Neighborhood Program Peer Exchange Call on Financing and Revenue: Bond Funding Call Slides and Discussion Summary, March 28, 2013  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: ScopeDepartment1, 2011 Better Buildings0,28, 2013 Better

149

Rhodium-Catalyzed C-C Bond Formation via Heteroatom-Directed C-H Bond Activation  

SciTech Connect (OSTI)

Once considered the 'holy grail' of organometallic chemistry, synthetically useful reactions employing C-H bond activation have increasingly been developed and applied to natural product and drug synthesis over the past decade. The ubiquity and relative low cost of hydrocarbons makes C-H bond functionalization an attractive alternative to classical C-C bond forming reactions such as cross-coupling, which require organohalides and organometallic reagents. In addition to providing an atom economical alternative to standard cross - coupling strategies, C-H bond functionalization also reduces the production of toxic by-products, thereby contributing to the growing field of reactions with decreased environmental impact. In the area of C-C bond forming reactions that proceed via a C-H activation mechanism, rhodium catalysts stand out for their functional group tolerance and wide range of synthetic utility. Over the course of the last decade, many Rh-catalyzed methods for heteroatom-directed C-H bond functionalization have been reported and will be the focus of this review. Material appearing in the literature prior to 2001 has been reviewed previously and will only be introduced as background when necessary. The synthesis of complex molecules from relatively simple precursors has long been a goal for many organic chemists. The ability to selectively functionalize a molecule with minimal pre-activation can streamline syntheses and expand the opportunities to explore the utility of complex molecules in areas ranging from the pharmaceutical industry to materials science. Indeed, the issue of selectivity is paramount in the development of all C-H bond functionalization methods. Several groups have developed elegant approaches towards achieving selectivity in molecules that possess many sterically and electronically similar C-H bonds. Many of these approaches are discussed in detail in the accompanying articles in this special issue of Chemical Reviews. One approach that has seen widespread success involves the use of a proximal heteroatom that serves as a directing group for the selective functionalization of a specific C-H bond. In a survey of examples of heteroatom-directed Rh catalysis, two mechanistically distinct reaction pathways are revealed. In one case, the heteroatom acts as a chelator to bind the Rh catalyst, facilitating reactivity at a proximal site. In this case, the formation of a five-membered metallacycle provides a favorable driving force in inducing reactivity at the desired location. In the other case, the heteroatom initially coordinates the Rh catalyst and then acts to stabilize the formation of a metal-carbon bond at a proximal site. A true test of the utility of a synthetic method is in its application to the synthesis of natural products or complex molecules. Several groups have demonstrated the applicability of C-H bond functionalization reactions towards complex molecule synthesis. Target-oriented synthesis provides a platform to test the effectiveness of a method in unique chemical and steric environments. In this respect, Rh-catalyzed methods for C-H bond functionalization stand out, with several syntheses being described in the literature that utilize C-H bond functionalization in a key step. These syntheses are highlighted following the discussion of the method they employ.

Colby, Denise; Bergman, Robert; Ellman, Jonathan

2010-05-13T23:59:59.000Z

150

The Market for Borrowing Corporate Bonds  

E-Print Network [OSTI]

This paper describes the market for borrowing corporate bonds using a comprehensive data set from a major lender. The cost of borrowing corporate bonds is comparable to the cost of borrowing stock, between 10 and 20 basis ...

Asquith, Paul

151

Major Business Expansion Bond Program (Maine)  

Broader source: Energy.gov [DOE]

The Major Business Expansion Bond Program provides long-term, credit-enhanced financing up to $25,000,000 at taxable bond rates for businesses creating or retaining at least 50 jobs; up to $10,000...

152

Secondary Market Taxable Bond Program (Maine)  

Broader source: Energy.gov [DOE]

The Secondary Market Taxable Bond Program provides tax-exempt interest rate bond financing for real estate and machinery and equipment acquisitions. Up to 90% of the project debt may be financed,...

153

Bonded, walk-off compensated optical elements  

DOE Patents [OSTI]

A bonded, walk-off compensated crystal, for use with optical equipment, and methods of making optical components including same.

Ebbers, Christopher A. (Livermore, CA)

2003-04-08T23:59:59.000Z

154

Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for planningtoA Journey Inside the Complex andIndustrial

155

Industry Economists  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for planningtoA Journey Inside the ComplexIndustry

156

Industry @ ALS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area.Portaldefault Sign In AboutIn theIndustry @ ALS

157

Study of bump bonding technology  

SciTech Connect (OSTI)

Pixel detectors proposed for the new generation of hadron collider experiments will use bump-bonding technology based on either indium or Pb/Sn solder to connect the front-end readout chips to the silicon pixel sensors. We have previously reported large-scale tests of the yield using both indium and Pb/Sn solder bump [1]. The conclusion is that both seem to be viable for pixel detectors. We have also carried out studies of various effects (e.g. storage over long period, effect of heating and cooling, and radiation) on both types of bump bonds using daisy-chained parts on a small scale [2], [3]. Overall, these tests showed little changes in the integrity of the bump connections. Nevertheless, questions still remain on the long-term reliability of the bumps due to thermal cycle effects, attachment to a substrate with a different coefficient of thermal expansion (CTE), and radiation.

Selcuk Cihangir et al.

2003-10-17T23:59:59.000Z

158

Clean Energy and Bond Finance Initiative  

Broader source: Energy.gov [DOE]

Provides information on Clean Energy and Bond Finance Initiative (CE+BFI). CE+BFI brings together public infrastructure finance agencies, clean energy public fund managers and institutional investors across the country to explore how to raise capital at scale for clean energy development through bond financing. Author: Clean Energy and Bond Finance Initiative

159

Mechanical & Industrial Engineering  

E-Print Network [OSTI]

Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

Mountziaris, T. J.

160

New method to diffusion bond superalloys A. A. Shirzadi and E. R. Wallach  

E-Print Network [OSTI]

used in gas power generation plants and aircraft engines. As a result of the extremely high cost interest to the power plant and aerospace industries, and a consider- able amount of research is being base and cobalt base super- alloys with `virtually invisible' bond interfaces and compositions very

Cambridge, University of

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

1 Reactivity Differences of Pt0 Phosphine Complexes in C-C Bond  

E-Print Network [OSTI]

) upon irradiation with UV light (>300 nm). In comparison, dtbpe 14 analogues of these metal complexes-H bond activa- 26 tions have found many successful applications in organic 27 synthesis and industrial into useful raw 31 materials1 and could offer potential applications in organic 32 synthesis and petroleum

Jones, William D.

162

Hydrogen Bonded Arrays: The Power of Multiple Hydrogen Bonds. | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinement plasmasSandy-Nor'easterStatisticalwithRhodiumFew-LayerBonded

163

Engineering Industrial & Systems  

E-Print Network [OSTI]

Industrial Engineering Department of Industrial & Systems Engineering Leslie Monplaisir, Ph powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I is available at: http://ise.wayne.edu/bs-industrial/index What is Industrial Engineering? The industrial

Berdichevsky, Victor

164

INDUSTRIAL ENGINEERING Industrial engineering is concerned  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

165

INDUSTRIAL ENGINEERING Industrial engineering is concerned  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

166

Bond Programs | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: Energy ResourcesJersey:formBlueBombay Beach, California:Bonds allow governments

167

Empirical study on the Korean treasury auction focusing on the revenue comparison in multiple versus single price auction  

E-Print Network [OSTI]

EMPIRICAL STUDY ON THE KOREAN TREASURY AUCTION FOCUSING ON THE REVENUE COMPARISON IN MULTIPLE VERSUS SINGLE PRICE AUCTION A Dissertation by BOO-SUNG KANG Submitted to the Office of Graduate Studies of Texas A&M... IN MULTIPLE VERSUS SINGLE PRICE AUCTION A Dissertation by BOO-SUNG KANG Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY Approved as to style and content by...

Kang, Boo-Sung

2006-04-12T23:59:59.000Z

168

Impact of oil revenues on foreign policy: a comparative analysis of Iran and Kuwait, 1974-1978  

SciTech Connect (OSTI)

This study compares the pattern of investment and expenditure of oil revenues to discern the existence of common and divergent elements in the policies of these Persian Gulf members of OPEC: one small Arab country, and one large non-Arab country with basic human and technical infrastructure. The study specifically surveys the utilization of oil revenues for the purchase of arms and technology, and for foreign aid programs. Externally, the economic upsurge during this period generated a new quasi-independent economic and political foreign policy. This quasi-independence is reflected, in part, by the ability to choose partners and allies without fearing financial reprisal from the major and super powers; by greater self reliance and greater freedom of action and the ability to impose their will; by their ability to exert integrative or disintegrative economic pressure on alliances and pursue conflict or cooperation with other nations; and finally by their potential ability to draw other states into regional conflicts and to influence the global balance of power. The study views oil as the overriding factor, among multiple operative factors in determinants of foreign policy in this strategically crucial region. Oil contributes not only as a substantial part of the gross national product, but also provides the bulk of the nation's export and foreign exchange revenues needed for import. As such, its influence dwarfs the importance of non-oil trade.

Kavoossi, M.

1983-01-01T23:59:59.000Z

169

Effects of Residual Feed Intake Classification on Feed Efficiency, Feeding Behavior, Carcass Traits, and Net Revenue in Angus-Based Composite Steers  

E-Print Network [OSTI]

of $118 to profits of $170 per head (Langemeier et al., 1992). These drastic net revenue differentials are the result of substantial variability in input costs, feeder and fed cattle prices and cattle performance. 4 Past investigations into factors...

Walter, Joel

2012-02-14T23:59:59.000Z

170

Nuclear reactor multiphysics via bond graph formalism  

E-Print Network [OSTI]

This work proposes a simple and effective approach to modeling nuclear reactor multiphysics problems using bond graphs. Conventional multiphysics simulation paradigms normally use operator splitting, which treats the ...

Sosnovsky, Eugeny

2014-01-01T23:59:59.000Z

171

Qualified Energy Conservation Bonds (QECBs) ? State Issues ...  

Broader source: Energy.gov (indexed) [DOE]

Qualified Energy Conservation Bonds (QECBs) - State Issues & Approaches February 12 th , 2013 DOE's Technical Assistance Program 2 Agenda * TAP Introduction & QECB Resources * QECB...

172

Tax-Exempt Bond Financing (Delaware)  

Broader source: Energy.gov [DOE]

The Delaware Economic Development Authority provides tax-exempt bond financing for financial assistance to new or expanding businesses, governmental units and certain organizations that are exempt...

173

Hydrogen Adsorption Induces Interlayer Carbon Bond Formation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen Adsorption Induces Interlayer Carbon Bond Formation in Supported Few-Layer Graphene Friday, February 28, 2014 Among the allotropes of carbon, diamond has some of the most...

174

Industrial and Systems engineering  

E-Print Network [OSTI]

Industrial and Systems engineering COLLEGE of ENGINEERING DepartmentofIndustrialandSystemsEngineering EDGE Engineering Entrepreneur Certificate Program is a great addition to an industrial and systems to expert clinical recommendations. engineering.wayne.edu/isefaculty Industrial and systems engineering

Berdichevsky, Victor

175

CASL Industry Council Meeting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

IndustryCouncil.shtml The new members that joined the Industry Council include NPP owneroperators with analysis capability: Tyrone Stevens of Exelon, and SMR vendors:...

176

Uranium industry annual 1997  

SciTech Connect (OSTI)

This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

NONE

1998-04-01T23:59:59.000Z

177

Electric Utility Industry Update  

Broader source: Energy.gov [DOE]

Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

178

How Hydrogen Bond Redundancy Affects Protein Flexibility  

E-Print Network [OSTI]

Modeling a Protein as a BodyBarHinge and Associated Graph Main Question: Stability in proteins is the resistance to denaturation, or unfolding. A protein that is highly stable has a high tolerance to bonds breaking before unfolding; an unstable protein has less tolerance. In this study, we focus on the question, how many hydrogen bonds

Naomi Fox; Filip Jagodzinski; Jeanne Hardy; Ileana Streinu

179

INDUSTRIAL ENGINEERING GRADUATE PROGRAMS  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor of Philosophy in Systems and Engineering Management programs prepare competent industrial engineers

Gelfond, Michael

180

Mechanical & Industrial Engineering  

E-Print Network [OSTI]

Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board May 5th, 2011 #12;Mechanical & Industrial Engineering 2 IAB 2010-2011 · David K. Anderson ­ Alden Research Laboratory, Inc went on for three weeks Mechanical & Industrial Engineering 6 #12;Reza Shahbazian Yassar Mechanical

Mountziaris, T. J.

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Industry Analysis February 2013  

E-Print Network [OSTI]

technology ­ Clean tech/ clean technology #12;7 Industry Studies · IbisWorld ­ U.S. and global industry-Industries · Biodiesel ­ Biofuel ­ Alternate fuels ­ Green fuels ­ Renewable fuels/energy ­ Green energy ­ Green Canada, Census, Industry Canada, the OECD, European Union, IMF, World Bank, UN . . . Never pay for stats

Abolmaesumi, Purang

182

Process Of Bonding Copper And Tungsten  

DOE Patents [OSTI]

Process for bonding a copper substrate to a tungsten substrate by providing a thin metallic adhesion promoting film bonded to a tungsten substrate and a functionally graded material (FGM) interlayer bonding the thin metallic adhesion promoting film to the copper substrate. The FGM interlayer is formed by sintering a stack of individual copper and tungsten powder blend layers having progressively higher copper content/tungsten content, by volume, ratio values in successive powder blend layers in a lineal direction extending from the tungsten substrate towards the copper substrate. The resulting copper to tungsten joint well accommodates the difference in the coefficient of thermal expansion of the materials.

Slattery, Kevin T. (St. Charles, MO); Driemeyer, Daniel E. (Manchester, MO); Davis, John W. (Ballwin, MO)

2000-07-18T23:59:59.000Z

183

A Preorganized Hydrogen Bond Network and Its Effect on Anion...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Preorganized Hydrogen Bond Network and Its Effect on Anion Stability. A Preorganized Hydrogen Bond Network and Its Effect on Anion Stability. Abstract: Rigid tricyclic locked in...

184

Atoms in Valence Bond. Method, implementation and application.  

E-Print Network [OSTI]

??The Atoms in Valence Bond (AiVB) approach is presented. The main goal was to develop a new and innovative approach, within the existing Valence Bond… (more)

Zielinski, M.L.

2012-01-01T23:59:59.000Z

185

Mechanistic Examination of C?–C? Bond Cleavages...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mechanistic Examination of C?–C? Bond Cleavages of Tryptophan Residues during Dissociations of Molecular Mechanistic Examination of C?–C? Bond...

186

Hydrogen-bond acidic functionalized carbon nanotubes (CNTs) with...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen-bond acidic functionalized carbon nanotubes (CNTs) with covalently-bound hexafluoroisopropanol groups. Hydrogen-bond acidic functionalized carbon nanotubes (CNTs) with...

187

Atomistic modeling of amorphous silicon carbide using a bond...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

modeling of amorphous silicon carbide using a bond-order potential. Atomistic modeling of amorphous silicon carbide using a bond-order potential. Abstract: Molecular dynamics...

188

Using Qualified Energy Conservation Bonds for Public Building...  

Broader source: Energy.gov (indexed) [DOE]

Using Qualified Energy Conservation Bonds for Public Building Upgrades: Reducing Energy Bills in the City of Philadelphia Using Qualified Energy Conservation Bonds for Public...

189

Taking Advantage of Qualified Energy Conservation Bonds (QECBs...  

Broader source: Energy.gov (indexed) [DOE]

Advantage of Qualified Energy Conservation Bonds (QECBs) Taking Advantage of Qualified Energy Conservation Bonds (QECBs) Blue version of the EERE PowerPoint template, for use with...

190

IRS Announces New Tribal Economic Development Bond Allocation...  

Broader source: Energy.gov (indexed) [DOE]

IRS Announces New Tribal Economic Development Bond Allocation Guidance IRS Announces New Tribal Economic Development Bond Allocation Guidance July 18, 2012 - 3:46pm Addthis To...

191

Covalency in Metal-Oxygen Multiple Bonds Evaluated Using Oxygen...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Covalency in Metal-Oxygen Multiple Bonds Evaluated Using Oxygen K-edge Spectroscopy and Electronic Structure Theory . Covalency in Metal-Oxygen Multiple Bonds Evaluated Using...

192

Municipal Bond - Power Purchase Agreement Model Continues to...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Municipal Bond - Power Purchase Agreement Model Continues to Provide Low-Cost Solar Energy Municipal Bond - Power Purchase Agreement Model Continues to Provide Low-Cost Solar...

193

Three Hydrogen Bond Donor Catalysts: Oxyanion Hole Mimics and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen Bond Donor Catalysts: Oxyanion Hole Mimics and Transition State Analogues. Three Hydrogen Bond Donor Catalysts: Oxyanion Hole Mimics and Transition State Analogues....

194

Proposed Revenues, Financial Strategy, and Program Costs for FY 1992 and 1993 : Technical Appendix, BPA Programs in Perspective.  

SciTech Connect (OSTI)

Programs in Perspective is the Bonneville Power Administration's public involvement process (PIP) for engaging customers and other stakeholders in a regional dialog to set strategic direction and broad program plans for BPA effort. This planning leads into a biennial rate setting cycle and offers a more accessible and flexible opportunity for dialog on broad issues than is possible under the strict administrative procedures of ratemaking. The self-financed character of BPA has made this public process a necessary and valuable one to assure that those who pay BPA's rates have a clear understanding and a strong voice in the plans for use of the resulting revenues. During 1989, the previous PIP engaged the region in discussion of major strategic, issues focussing on major areas. In 1990, BPA seeks discussion of the directions and plans specifically for fiscal years 1992 and 1993. The steps taken for those years will lay the foundation for the years beyond. Thus, we have subtitled this year's process, Staying fit for the long run.'' We have consulted extensively with customers and others in the region in developing these plans. In dozens of program--specific meetings, BPA staff have talked and listened to what others think our plans ought to be. PIP now gives us a chance to review their sum total, along with projections for revenues and our overall financial position. 8 tabs., 8 figs.

United States. Bonneville Power Administration.

1990-07-01T23:59:59.000Z

195

The Ohio Enterprise Bond Fund (Ohio)  

Broader source: Energy.gov [DOE]

The Ohio Enterprise Bond Fund (OEBF) was created in 1988 to promote economic development, create and retain quality jobs and assist governmental operations. The program enables non-profit and for...

196

Sandia National Laboratories: Diffusion Bonding Characterization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

bond surface is poor or only the region near this corner Diffusion 7-8-9 Diffusion Welding and Brazing, Welding Handbook, 7th ed., American Welding Society, 1980, p 311-335...

197

Measurement of Elastic Modulus of PUNB Bonded Sand as a Function of Temperature J. Thole and C. Beckermann  

E-Print Network [OSTI]

. Beckermann Dept. of Mechanical and Industrial Engineering, University of Iowa, Iowa City, Iowa 52242 Abstract Measurements of the elastic modulus of PUNB bonded silica sand are performed using a three-point bend test from for the elastic modulus at room temperature is obtained when measured under compressive, tensile or bending

Beckermann, Christoph

198

New York Marcellus Shale: Industry boom put on hold  

SciTech Connect (OSTI)

Key catalysts for Marcellus Shale drilling in New York were identified. New York remains the only state in the nation with a legislative moratorium on high-volume hydraulic fracturing, as regulators and state lawmakers work to balance the advantages of potential economic benefits while protecting public drinking water resources and the environment. New York is being particularly careful to work on implementing sufficiently strict regulations to mitigate the environmental impacts Pennsylvania has already seen, such as methane gas releases, fracturing fluid releases, flowback water and brine controls, and total dissolved solids discharges. In addition to economic and environmental lessons learned, the New York Department of Environmental Conservation (DEC) also acknowledges impacts to housing markets, security, and other local issues, and may impose stringent measures to mitigate potential risks to local communities. Despite the moratorium, New York has the opportunity to take advantage of increased capital investment, tax revenue generation, and job creation opportunities by increasing shale gas activity. The combination of economic benefits, industry pressure, and recent technological advances will drive the pursuit of natural gas drilling in New York. We identify four principal catalysts as follows: Catalyst 1: Pressure from Within the State. Although high-volume hydraulic fracturing has become a nationally controversial technology, shale fracturing activity is common in every U.S. state except New York. The regulatory process has delayed potential economic opportunities for state and local economies, as well as many industry stakeholders. In 2010, shale gas production accounted for $18.6 billion in federal royalty and local, state, and federal tax revenues. (1) This is expected to continue to grow substantially. The DEC is under increased pressure to open the state to the same opportunities that Alabama, Arkansas, California, Colorado, Kansas, Louisiana, Montana, New Mexico, North Dakota, Ohio, Oklahoma, Pennsylvania, South Dakota, Texas, Utah, West Virginia, and Wyoming are pursuing. Positive labor market impacts are another major economic draw. According to the Revised Draft SGEIS on the Oil, Gas and Solution Mining Regulatory Program (September 2011), hydraulic fracturing would create between 4,408 and 17,634 full-time equivalent (FTE) direct construction jobs in New York State. Indirect employment in other sectors would add an additional 29,174 FTE jobs. Furthermore, the SGEIS analysis suggests that drilling activities could add an estimated $621.9 million to $2.5 billion in employee earnings (direct and indirect) per year, depending upon how much of the shale is developed. The state would also receive direct tax receipts from leasing land, and has the potential to see an increase in generated indirect revenue. Estimates range from $31 million to $125 million per year in personal income tax receipts, and local governments would benefit from revenue sharing. Some landowner groups say the continued delay in drilling is costing tens of thousands of jobs and millions of dollars in growth for New York, especially in the economically stunted upstate. A number of New York counties near Pennsylvania, such as Chemung, NY, have experienced economic uptick from Pennsylvania drilling activity just across the border. Chemung officials reported that approximately 1,300 county residents are currently employed by the drilling industry in Pennsylvania. The Marcellus shale boom is expected to continue over the next decade and beyond. By 2015, gas drilling activity could bring 20,000 jobs to New York State alone. Other states, such as Pennsylvania and West Virginia, are also expected to see a significant increase in the number of jobs. Catalyst 2: Political Reality of the Moratorium. Oil and gas drilling has taken place in New York since the 19th century, and it remains an important industry with more than 13,000 currently active wells. The use of hydraulic fracturing in particular has been employed for decades. Yet, as technological

Mercurio, Angelique

2012-01-16T23:59:59.000Z

199

Method of bonding metals to ceramics  

DOE Patents [OSTI]

A ceramic or glass having a thin layer of silver, gold or alloys thereof at the surface thereof is disclosed. A first metal is bonded to the thin layer and a second metal is bonded to the first metal. The first metal is selected from the class consisting of In, Ga, Sn, Bi, Zn, Cd, Pb, Tl and alloys thereof, and the second metal is selected from the class consisting of Cu, Al, Pb, Au and alloys thereof. 3 figures.

Maroni, V.A.

1991-04-23T23:59:59.000Z

200

INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY  

E-Print Network [OSTI]

INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

Pohl, Karsten

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Demographics and industry returns  

E-Print Network [OSTI]

Industry category Child care Children’s books Children’s clothing Toysindustry Child care Children’s books Children’s clothing ToysIndustries are associated with high demand by children (child care, toys) and

Pollet, Joshua A.; DellaVigna, Stefano

2007-01-01T23:59:59.000Z

202

Electrotechnologies in Process Industries  

E-Print Network [OSTI]

The Industrial Program at the Electric Power Research Institute (EPRI) promotes the efficient use of electricity to improve the competitive position of the American industry. Electrotechnologies that improve productivity, improve quality...

Amarnath, K. R.

203

The Industrial Electrification Program  

E-Print Network [OSTI]

EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

Harry, I. L.

1982-01-01T23:59:59.000Z

204

Geothermal Industry Partnership Opportunities  

Broader source: Energy.gov [DOE]

Here you'll find links to information about partnership opportunities and programs for the geothermal industry.

205

Evolution of the radiation processing industry  

SciTech Connect (OSTI)

Early investigations of the effects of treating materials with ionizing radiations began in 1894 with the irradiation of gases at atmospheric pressure using cathode rays from a Crookes gas-discharge tube, in 1895 with the discovery of X-rays emitted from a Crookes tube, and in 1896 with the discovery of radioactivity in uranium. In 1897, small electrically charged particles were detected and identified in the gas discharges inside Crookes tubes. These particles were then named electrons. During the next three decades, it was found that these novel forms of energy could produce ions to initiate chemical reactions in some gases and liquids. By 1921, it had also been shown that insects, parasites and bacteria could be killed by treatment with ionizing radiation. In 1925, a high-vacuum tube with a thermionic cathode and a thin metallic anode was developed to produce electron beams in air by using accelerating potentials up to 250 kilovolts. That unique apparatus was the precursor of the many types of electron accelerators that have been developed since then for a variety of industrial applications. In 1929, the vulcanization of natural rubber without using any chemical additives was achieved by irradiation with electrons from a 250 kilovolt accelerator. In 1939, several liquid monomers were polymerized by treatment with gamma rays from radioactive nuclides. These early results were not exploited before the end of World War II because intense sources of ionizing radiation were not available then. Shortly after that war, there was increased interest in developing the peaceful uses of atomic energy, which included the chemical and biological effects of radiation exposures. Many uses that have been developed since then are described briefly in this paper. These industrial applications are now producing billions of US dollars in revenue every year.

Cleland, Marshall R. [IBA Industrial, Inc., 151 Heartland Boulevard, Edgewood, NY 11717 (United States)

2013-04-19T23:59:59.000Z

206

Photovoltaics industry profile  

SciTech Connect (OSTI)

A description of the status of the US photovoltaics industry is given. Principal end-user industries are identified, domestic and foreign market trends are discussed, and industry-organized and US government-organized trade promotion events are listed. Trade associations and trade journals are listed, and a photovoltaic product manufacturers list is included. (WHK)

None

1980-10-01T23:59:59.000Z

207

Mechanical & Industrial Engineering  

E-Print Network [OSTI]

Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

Mountziaris, T. J.

208

INDUSTRIAL AND BIOMEDICAL APPLICATIONS  

E-Print Network [OSTI]

INDUSTRIAL AND BIOMEDICAL APPLICATIONS Frank Smith, Nicholas Ovenden and Richard Purvis University are described, one industrial on violent water-air interaction during an impact process and the other biomedical: industrial, biomedical, impacts, networks, theory, computation, scales. 1. INTRODUCTION It is a pleasure

Purvis, Richard

209

July 18, 2012 Using Qualified Energy Conservation Bonds for Public  

E-Print Network [OSTI]

July 18, 2012 Using Qualified Energy Conservation Bonds for Public Building Upgrades: Reducing Energy Bills in the City of Philadelphia Qualified Energy Conservation Bonds (QECBs) are federally Energy Conservation Bond (QECB) is a bond that enables qualified state, tribal and local government

210

Industrial policy and the Indian electronics industry  

E-Print Network [OSTI]

Recently, production within India's Electronics sector amounted to a low $12 billion when compared to the global output of $1400 billion. The slow growth in the local industry is often judged to be the result of late ...

Love, Robert (Robert Eric)

2008-01-01T23:59:59.000Z

211

Interacting With the Pharmaceutical Industry  

E-Print Network [OSTI]

INTERACTING WITH THE PHARMACEUTICAL INDUSTRY Stephen R.to interactions with the pharmaceutical industry! This is ancome from the pharmaceutical industry. It is also reality

Hayden, Stephen R

2003-01-01T23:59:59.000Z

212

The Ties That Bond: Re-Examining the Relationship between Facebook Use and Bonding Social Capital  

E-Print Network [OSTI]

The Ties That Bond: Re-Examining the Relationship between Facebook Use and Bonding Social Capital established a positive relationship between measures of Facebook use and perceptions of social capital. Like other social network sites, Facebook is especially well-positioned to enhance users' bridging social

Michigan, University of

213

Uranium industry annual 1994  

SciTech Connect (OSTI)

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

NONE

1995-07-05T23:59:59.000Z

214

INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

Rohs, Remo

215

Shirzadi et al. Surface and Interface Analysis 2001; 31:609-618 Interface evolution and bond strength when diffusion bonding  

E-Print Network [OSTI]

strength when diffusion bonding materials with stable oxide films A.A. Shirzadi* , H. Assadi and E morphologies and strengths of aluminium diffusion bonds are reviewed. Previous approaches, proposed to overcome for both solid-state diffusion bonding and conventional transient liquid phase (TLP) diffusion bonding. Non

Cambridge, University of

216

Hydrogen Bond Networks: Structure and Evolution after Hydrogen Bond Breaking John B. Asbury, Tobias Steinel, and M. D. Fayer*  

E-Print Network [OSTI]

Hydrogen Bond Networks: Structure and Evolution after Hydrogen Bond Breaking John B. Asbury, TobiasVed: September 1, 2003; In Final Form: December 18, 2003 The nature of hydrogen bonding networks following hydrogen bond breaking is investigated using vibrational echo correlation spectroscopy of the hydroxyl

Fayer, Michael D.

217

Process Of Bonding Copper And Tungsten  

DOE Patents [OSTI]

Process for bonding a copper substrate to a tungsten substrate by providing a thin metallic adhesion promoting film bonded to a tungsten substrate and a functionally graded material (FGM) interlayer bonding the thin metallic adhesion promoting film to the copper substrate. The FGM interlayer is formed by thermal plasma spraying mixtures of copper powder and tungsten powder in a varied blending ratio such that the blending ratio of the copper powder and the tungsten powder that is fed to a plasma torch is intermittently adjusted to provide progressively higher copper content/tungsten content, by volume, ratio values in the interlayer in a lineal direction extending from the tungsten substrate towards the copper substrate. The resulting copper to tungsten joint well accommodates the difference in the coefficient of thermal expansion of the materials.

Slattery, Kevin T. (St. Charles, MO); Driemeyer, Daniel E. (Manchester, MO)

1999-11-23T23:59:59.000Z

218

Epoxy bond and stop etch fabrication method  

DOE Patents [OSTI]

A class of epoxy bond and stop etch (EBASE) microelectronic fabrication techniques is disclosed. The essence of such techniques is to grow circuit components on top of a stop etch layer grown on a first substrate. The first substrate and a host substrate are then bonded together so that the circuit components are attached to the host substrate by the bonding agent. The first substrate is then removed, e.g., by a chemical or physical etching process to which the stop etch layer is resistant. EBASE fabrication methods allow access to regions of a device structure which are usually blocked by the presence of a substrate, and are of particular utility in the fabrication of ultrafast electronic and optoelectronic devices and circuits.

Simmons, Jerry A. (Sandia Park, NM); Weckwerth, Mark V. (Pleasanton, CA); Baca, Wes E. (Albuquerque, NM)

2000-01-01T23:59:59.000Z

219

Bonded ultrasonic transducer and method for making  

DOE Patents [OSTI]

An ultrasonic transducer is formed as a diffusion bonded assembly of piezoelectric crystal, backing material, and, optionally, a ceramic wear surface. The mating surfaces of each component are silver films that are diffusion bonded together under the application of pressure and heat. Each mating surface may also be coated with a reactive metal, such as hafnium, to increase the adhesion of the silver films to the component surfaces. Only thin silver films are deposited, e.g., a thickness of about 0.00635 mm, to form a substantially non-compliant bond between surfaces. The resulting transducer assembly is substantially free of self-resonances over normal operating ranges for taking resonant ultrasound measurements. 12 figs.

Dixon, R.D.; Roe, L.H.; Migliori, A.

1995-11-14T23:59:59.000Z

220

Bonded ultrasonic transducer and method for making  

DOE Patents [OSTI]

An ultrasonic transducer is formed as a diffusion bonded assembly of piezoelectric crystal, backing material, and, optionally, a ceramic wear surface. The mating surfaces of each component are silver films that are diffusion bonded together under the application of pressure and heat. Each mating surface may also be coated with a reactive metal, such as hafnium, to increase the adhesion of the silver films to the component surfaces. Only thin silver films are deposited, e.g., a thickness of about 0.00635 mm, to form a substantially non-compliant bond between surfaces. The resulting transducer assembly is substantially free of self-resonances over normal operating ranges for taking resonant ultrasound measurements.

Dixon, Raymond D. (Los Alamos, NM); Roe, Lawrence H. (Los Alamos, NM); Migliori, Albert (Santa Fe, NM)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Page 1 of 1 This policy establishes an institutional procedure for residual revenue earned on restricted fixed-price or fee-for-  

E-Print Network [OSTI]

be deposited in this account. Georgia Southern University invoices the Research Foundation monthly for residualPage 1 of 1 I. Purpose This policy establishes an institutional procedure for residual revenue completion, deficit or surplus (residual) balances must be transferred to a non-sponsored account. Because

Hutcheon, James M.

222

Bond Strength Measurements from an Australian Standard Bond Wrench in Comparison to the Unbalanced ASTM C 1072 Bond Wrench to the Balanced and Unbalanced Wrenches  

E-Print Network [OSTI]

Bond wrenches. The Australian wrench values were significantly higher than the American bond wrenches for similar types of samples. Hence it was recommended that the tests be carried out by replacing the cement with Portland cement. This experimental...

Suresh, Sri Vishnu Chaitanya Guptha

2014-08-14T23:59:59.000Z

223

Adhesive bonding using variable frequency microwave energy  

DOE Patents [OSTI]

Methods of facilitating the adhesive bonding of various components with variable frequency microwave energy are disclosed. The time required to cure a polymeric adhesive is decreased by placing components to be bonded via the adhesive in a microwave heating apparatus having a multimode cavity and irradiated with microwaves of varying frequencies. Methods of uniformly heating various articles having conductive fibers disposed therein are provided. Microwave energy may be selectively oriented to enter an edge portion of an article having conductive fibers therein. An edge portion of an article having conductive fibers therein may be selectively shielded from microwave energy.

Lauf, Robert J. (Oak Ridge, TN); McMillan, April D. (Knoxville, TN); Paulauskas, Felix L. (Oak Ridge, TN); Fathi, Zakaryae (Cary, NC); Wei, Jianghua (Raleigh, NC)

1998-01-01T23:59:59.000Z

224

Adhesive bonding using variable frequency microwave energy  

DOE Patents [OSTI]

Methods of facilitating the adhesive bonding of various components with variable frequency microwave energy are disclosed. The time required to cure a polymeric adhesive is decreased by placing components to be bonded via the adhesive in a microwave heating apparatus having a multimode cavity and irradiated with microwaves of varying frequencies. Methods of uniformly heating various articles having conductive fibers disposed therein are provided. Microwave energy may be selectively oriented to enter an edge portion of an article having conductive fibers therein. An edge portion of an article having conductive fibers therein may be selectively shielded from microwave energy. 26 figs.

Lauf, R.J.; McMillan, A.D.; Paulauskas, F.L.; Fathi, Z.; Wei, J.

1998-09-08T23:59:59.000Z

225

Adhesive bonding using variable frequency microwave energy  

DOE Patents [OSTI]

Methods of facilitating the adhesive bonding of various components with variable frequency microwave energy are disclosed. The time required to cure a polymeric adhesive is decreased by placing components to be bonded via the adhesive in a microwave heating apparatus having a multimode cavity and irradiated with microwaves of varying frequencies. Methods of uniformly heating various articles having conductive fibers disposed therein are provided. Microwave energy may be selectively oriented to enter an edge portion of an article having conductive fibers therein. An edge portion of an article having conductive fibers therein may be selectively shielded from microwave energy. 26 figs.

Lauf, R.J.; McMillan, A.D.; Paulauskas, F.L.; Fathi, Z.; Wei, J.

1998-08-25T23:59:59.000Z

226

Phosphate-bonded calcium aluminate cements  

DOE Patents [OSTI]

A method is described for making a rapid-setting phosphate-bonded cementitious material. A powdered aluminous cement is mixed with an aqueous solution of ammonium phosphate. The mixture is allowed to set to form an amorphous cementitious material which also may be hydrothermally treated at a temperature of from about 120 C to about 300 C to form a crystal-containing phosphate-bonded material. Also described are the cementitious products of this method and the cement composition which includes aluminous cement and ammonium polyphosphate. 10 figures.

Sugama, T.

1993-09-21T23:59:59.000Z

227

Financing Public Sector Projects with Clean Renewable Energy Bonds; Fact Sheet Series on Financing Renewable Energy Projects, National Renewable Energy Laboratory (NREL)  

SciTech Connect (OSTI)

Clean renewable energy bonds (CREBs) present a low-cost opportunity for public entities to issue bonds to finance renewable energy projects. The federal government lowers the cost of debt by providing a tax credit to the bondholder in lieu of interest payments from the issuer. Because CREBs are theoretically interest free, they may be more attractive than traditional tax-exempt municipal bonds. In February 2009, Congress appropriated a total of $2.4 billion for the "New CREBs" program. No more than one-third of the budget may be allocated to each of the eligible entities: governmental bodies, electric cooperatives, and public power providers. Applications for this round of "New CREBs" were due to the Internal Revenue Service (IRS) on August 4, 2009. There is no indication Congress will extend the CREBs program; thus going forward, only projects that are approved under the 2009 round will be able to issue CREBs. This factsheet explains the CREBs mechanism and provides guidance on procedures related to issuing CREBs.

Kreycik, C.; Couglin, J.

2009-12-01T23:59:59.000Z

228

Nitride-bonded silicon carbide composite filter  

SciTech Connect (OSTI)

The objective of this program is to develop and demonstrate an advanced hot gas filter, using ceramic component technology, with enhanced durability to provide increased resistance to thermal fatigue and crack propagation. The material is silicon carbide fiber reinforced nitride bonded silicon carbide.

Thomson, B.N.; DiPietro, S.G.

1995-12-01T23:59:59.000Z

229

Fluorinated diamond bonded in fluorocarbon resin  

DOE Patents [OSTI]

By fluorinating diamond grit, the grit may be readily bonded into a fluorocarbon resin matrix. The matrix is formed by simple hot pressing techniques. Diamond grinding wheels may advantageously be manufactured using such a matrix. Teflon fluorocarbon resins are particularly well suited for using in forming the matrix.

Taylor, Gene W. (Los Alamos, NM)

1982-01-01T23:59:59.000Z

230

Industrial Security Specialst  

Broader source: Energy.gov [DOE]

A successful candidate in this position will serve in a developmental capacity assisting senior specialists in carrying out a variety of industrial security and oversight functions.

231

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Boiler, Steam, and Cogeneration (BSC) Component. The BSC Component satisfies the steam demand from the PA and BLD Components. In some industries, the PA Component produces...

232

Dynamic force spectroscopy on multiple bonds: experiments and model  

E-Print Network [OSTI]

We probe the dynamic strength of multiple biotin-streptavidin adhesion bonds under linear loading using the biomembrane force probe setup for dynamic force spectroscopy. Measured rupture force histograms are compared to results from a master equation model for the stochastic dynamics of bond rupture under load. This allows us to extract the distribution of the number of initially closed bonds. We also extract the molecular parameters of the adhesion bonds, in good agreement with earlier results from single bond experiments. Our analysis shows that the peaks in the measured histograms are not simple multiples of the single bond values, but follow from a superposition procedure which generates different peak positions.

T. Erdmann; S. Pierrat; P. Nassoy; U. S. Schwarz

2007-12-18T23:59:59.000Z

233

Bayesian field theoretic reconstruction of bond potential and bond mobility in single molecule force spectroscopy  

E-Print Network [OSTI]

Quantifying the forces between and within macromolecules is a necessary first step in understanding the mechanics of molecular structure, protein folding, and enzyme function and performance. In such macromolecular settings, dynamic single-molecule force spectroscopy (DFS) has been used to distort bonds. The resulting responses, in the form of rupture forces, work applied, and trajectories of displacements, have been used to reconstruct bond potentials. Such approaches often rely on simple parameterizations of one-dimensional bond potentials, assumptions on equilibrium starting states, and/or large amounts of trajectory data. Parametric approaches typically fail at inferring complex-shaped bond potentials with multiple minima, while piecewise estimation may not guarantee smooth results with the appropriate behavior at large distances. Existing techniques, particularly those based on work theorems, also do not address spatial variations in the diffusivity that may arise from spatially inhomogeneous coupling to...

Chang, Joshua C; Chou, Tom

2015-01-01T23:59:59.000Z

234

Geothermal industry assessment  

SciTech Connect (OSTI)

An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

Not Available

1980-07-01T23:59:59.000Z

235

Growing Hawaii's agriculture industry,  

E-Print Network [OSTI]

Program Overview Growing Hawaii's agriculture industry, one business at a time Website: http-3547 agincubator@ctahr.hawaii.edu Grow Your Business If you are looking to start an agriculture-related business with our program · Positively impact the agriculture industry in Hawaii with their success

236

and Industrial Engineering  

E-Print Network [OSTI]

45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle, Undergraduate Program Director Office: 207C Engineering Lab Building Phone: (413) 545-2505 Head of Department

Mountziaris, T. J.

237

Industrial Optimization Compact Course  

E-Print Network [OSTI]

Industrial Optimization Compact Course and Challenge Workshop Optimization plays a crucial role of the processes are typically nonlinear and dyna- mic. Thus, complex dynamic optimization or optimal control in industrial optimization. February 17­20, 2014 ·9.00­17.00 IWR ·Im Neuenheimer Feld 368 ·69120 Heidelberg www

Kirches, Christian

238

Various Carbon to Carbon Bond Lengths Inter-related via the Golden Ratio, and their Linear Dependence on Bond Energies  

E-Print Network [OSTI]

This work presents the relations between the carbon to carbon bond lengths in the single, double and triple bonds and in graphite, butadiene and benzene. The Golden ratio, which was shown to divide the Bohr radius into two parts pertaining to the charged particles, the electron and proton, and to divide inter-atomic distances into their cationic and anionic radii, also plays a role in the carbon-carbon bonds and in the ionic/polar character of those in graphite, butadiene and benzene. Further, the bond energies of the various CC bonds are shown to vary linearly with the bond lengths.

Raji Heyrovska

2008-09-11T23:59:59.000Z

239

Uranium industry annual 1996  

SciTech Connect (OSTI)

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

NONE

1997-04-01T23:59:59.000Z

240

Posted 3/2/13 Medline Industries Industrial Engineer  

E-Print Network [OSTI]

Posted 3/2/13 Medline Industries ­ Industrial Engineer Medline Industries, Inc. has an immediate opening for an Industrial Engineer for our SPT Division located in Waukegan, IL. We are seeking a hard-working, detail-oriented professional with experience in industrial engineering and lean manufacturing within

Heller, Barbara

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

INDUSTRIAL&SYSTEMS Industrial and Systems engineers use  

E-Print Network [OSTI]

78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

Rohs, Remo

242

INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited Industrial and Systems Engineering Bachelor of Science 128 units Industrial and Systems Engineering

Rohs, Remo

243

INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

Rohs, Remo

244

Experimental bond critical point and local energy density properties...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mn-O, Fe-O and Co-O bonded interactions for Abstract: Bond critical point, bcp, and local energy density properties for the electron density, ED, distributions, calculated with...

245

Pre-plated reactive diffusion-bonded battery electrode plaques  

DOE Patents [OSTI]

A high strength, metallic fiber battery plaque is made using reactive diffusion bonding techniques, where a substantial amount of the fibers are bonded together by an iron-nickel alloy.

Maskalick, Nicholas J. (Pittsburgh, PA)

1984-01-01T23:59:59.000Z

246

Imaging Intrinsic Diffusion of Bridge-Bonded Oxygen Vacancies...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Intrinsic Diffusion of Bridge-Bonded Oxygen Vacancies on TiO2(110). Imaging Intrinsic Diffusion of Bridge-Bonded Oxygen Vacancies on TiO2(110). Abstract: Since oxygen atom...

247

Hydrogen Bonding DOI: 10.1002/anie.200501349  

E-Print Network [OSTI]

systems[5­13] and crystal engineering.[14­18] Most C�H···O hydrogen bonds have been observed for the soHydrogen Bonding DOI: 10.1002/anie.200501349 Observation of Weak C�H···O Hydrogen Bonding to Unactivated Alkanes** Xue-Bin Wang, Hin-Koon Woo, Boggavarapu Kiran, and Lai-Sheng Wang* The hydrogen bond

Simons, Jack

248

Article coated with flash bonded superhydrophobic particles  

DOE Patents [OSTI]

A method of making article having a superhydrophobic surface includes: providing a solid body defining at least one surface; applying to the surface a plurality of diatomaceous earth particles and/or particles characterized by particle sizes ranging from at least 100 nm to about 10 .mu.m, the particles being further characterized by a plurality of nanopores, wherein at least some of the nanopores provide flow through porosity, the particles being further characterized by a plurality of spaced apart nanostructured features that include a contiguous, protrusive material; flash bonding the particles to the surface so that the particles are adherently bonded to the surface; and applying a hydrophobic coating layer to the surface and the particles so that the hydrophobic coating layer conforms to the nanostructured features.

Simpson, John T (Clinton, TN) [Clinton, TN; Blue, Craig A (Knoxville, TN) [Knoxville, TN; Kiggans, Jr., James O [Oak Ridge, TN

2010-07-13T23:59:59.000Z

249

Partial-Transient-Liquid-Phase Bonding of Advanced Ceramics Using Surface-Modified Interlayers  

E-Print Network [OSTI]

Theoretical-Model for Diffusion Bonding." Metal Science 16,Derby, B. & Wallach, E. "Diffusion Bonding - Development ofInterfacial Contact during Diffusion Bonding." Metallurgical

Reynolds, Thomas Bither

2012-01-01T23:59:59.000Z

250

Oil prices and government bond risk premiums Herv Alexandre*  

E-Print Network [OSTI]

Oil prices and government bond risk premiums By Hervé Alexandre*º Antonin de Benoist * Abstract : This article analyses the impact of oil price on bond risk premiums issued by emerging economies. No empirical study has yet focussed on the effects of the oil price on government bond risk premiums. We develop

Boyer, Edmond

251

Diffusion Bonding Aluminium Alloys and Composites: New Approaches and Modelling  

E-Print Network [OSTI]

Diffusion Bonding Aluminium Alloys and Composites: New Approaches and Modelling Amir A. Shirzadi of the research, two new methods for TLP diffusion bonding of aluminium-based composites (aluminium alloys diffusion bonding and hot isostatic pressing without encapsulation. It allows the fabrication of intricate

Cambridge, University of

252

Energetics of hydrogen bonds in peptides Sheh-Yi Sheu*  

E-Print Network [OSTI]

for water. We find that the activation energy for the rupture of the hydrogen bond in a -sheet under calculation can be useful for the prediction of hydrogen bond strengths in various environments of interest extensively to calculate free energy changes caused by hydrogen bond rupture. Here the water environment

Sheu, Sheh-Yi

253

Hydrogen Bonding Penalty upon Ligand Binding Hongtao Zhao, Danzhi Huang*  

E-Print Network [OSTI]

Hydrogen Bonding Penalty upon Ligand Binding Hongtao Zhao, Danzhi Huang* Department of Biochemistry, University of Zurich, Zurich, Switzerland Abstract Ligand binding involves breakage of hydrogen bonds with water molecules and formation of new hydrogen bonds between protein and ligand. In this work, the change

Caflisch, Amedeo

254

Analysis of C H...O hydrogen bonds  

E-Print Network [OSTI]

1 Analysis of C H...O hydrogen bonds in high resolution protein crystal structures from the PDB 1.4 Identification of C-H...O hydrogen bonds............................................. 1.4.1 The definition of a C-H...O hydrogen bond.................................... 1.4.2 Fixing the hydrogen and measuring the parameters

Babu, M. Madan

255

Vacuum fusion bonding of glass plates  

DOE Patents [OSTI]

An improved apparatus and method for vacuum fusion bonding of large, patterned glass plates. One or both glass plates are patterned with etched features such as microstructure capillaries and a vacuum pumpout moat, with one plate having at least one hole therethrough for communication with a vacuum pumpout fixture. High accuracy alignment of the plates is accomplished by a temporary clamping fixture until the start of the fusion bonding heat cycle. A complete, void-free fusion bond of seamless, full-strength quality is obtained through the plates; because the glass is heated well into its softening point and because of a large, distributed force that is developed that presses the two plates together from the difference in pressure between the furnace ambient (high pressure) and the channeling and microstructures in the plates (low pressure) due to the vacuum drawn. The apparatus and method may be used to fabricate microcapillary arrays for chemical electrophoresis; for example, any apparatus using a network of microfluidic channels embedded between plates of glass or similar moderate melting point substrates with a gradual softening point curve, or for assembly of glass-based substrates onto larger substrates, such as in flat panel display systems.

Swierkowski, Steve P. (Livermore, CA); Davidson, James C. (Livermore, CA); Balch, Joseph W. (Livermore, CA)

2001-01-01T23:59:59.000Z

256

Vacuum fusion bonding of glass plates  

DOE Patents [OSTI]

An improved apparatus and method for vacuum fusion bonding of large, patterned glass plates. One or both glass plates are patterned with etched features such as microstructure capillaries and a vacuum pumpout moat, with one plate having at least one hole therethrough for communication with a vacuum pumpout fixture. High accuracy alignment of the plates is accomplished by a temporary clamping fixture until the start of the fusion bonding heat cycle. A complete, void-free fusion bond of seamless, full-strength quality is obtained through the plates; because the glass is heated well into its softening point and because of a large, distributed force that is developed that presses the two plates together from the difference in pressure between the furnace ambient (high pressure) and the channeling and microstructures in the plates (low pressure) due to the vacuum drawn. The apparatus and method may be used to fabricate microcapillary arrays for chemical electrophoresis; for example, any apparatus using a network of microfluidic channels embedded between plates of glass or similar moderate melting point substrates with a gradual softening point curve, or for assembly of glass-based substrates onto larger substrates, such as in flat panel display systems.

Swierkowski, Steve P. (Livermore, CA); Davidson, James C. (Livermore, CA); Balch, Joseph W. (Livermore, CA)

2000-01-01T23:59:59.000Z

257

Anesthesia cutoff phenomenon: Interfacial hydrogen bonding  

SciTech Connect (OSTI)

Anesthesia cutoff refers to the phenomenon of loss of anesthetic potency in a homologous series of alkanes and their derivatives when their sizes become too large. In this study, hydrogen bonding of 1-alkanol series (ethanol to eicosanol) to dipalmitoyl-L-alpha-phosphatidylcholine (DPPC) was studied by Fourier transform infrared spectroscopy (FTIR) in DPPC-D2O-in-CCl4 reversed micelles. The alkanols formed hydrogen bonds with the phosphate moiety of DPPC and released the DPPC-bound deuterated water, evidenced by increases in the bound O-H stretching signal of the alkanol-DPPC complex and also in the free O-D stretching band of unbound D2O. These effects increased according to the elongation of the carbon chain of 1-alkanols from ethanol (C2) to 1-decanol (C10), but suddenly almost disappeared at 1-tetradecanol (C14). Anesthetic potencies of these alkanols, estimated by the activity of brine shrimps, were linearly related to hydrogen bond-breaking activities below C10 and agreed with the FTIR data in the cutoff at C10.

Chiou, J.S.; Ma, S.M.; Kamaya, H.; Ueda, I. (Univ. of Utah School of Medicine, Salt Lake City (USA))

1990-05-04T23:59:59.000Z

258

Microchannel cooling of face down bonded chips  

DOE Patents [OSTI]

Microchannel cooling is applied to flip-chip bonded integrated circuits, in a manner which maintains the advantages of flip-chip bonds, while overcoming the difficulties encountered in cooling the chips. The technique is suited to either multichip integrated circuit boards in a plane, or to stacks of circuit boards in a three dimensional interconnect structure. Integrated circuit chips are mounted on a circuit board using flip-chip or control collapse bonds. A microchannel structure is essentially permanently coupled with the back of the chip. A coolant delivery manifold delivers coolant to the microchannel structure, and a seal consisting of a compressible elastomer is provided between the coolant delivery manifold and the microchannel structure. The integrated circuit chip and microchannel structure are connected together to form a replaceable integrated circuit module which can be easily decoupled from the coolant delivery manifold and the circuit board. The coolant supply manifolds may be disposed between the circuit boards in a stack and coupled to supplies of coolant through a side of the stack.

Bernhardt, Anthony F. (Berkeley, CA)

1993-01-01T23:59:59.000Z

259

Microchannel cooling of face down bonded chips  

DOE Patents [OSTI]

Microchannel cooling is applied to flip-chip bonded integrated circuits, in a manner which maintains the advantages of flip-chip bonds, while overcoming the difficulties encountered in cooling the chips. The technique is suited to either multi chip integrated circuit boards in a plane, or to stacks of circuit boards in a three dimensional interconnect structure. Integrated circuit chips are mounted on a circuit board using flip-chip or control collapse bonds. A microchannel structure is essentially permanently coupled with the back of the chip. A coolant delivery manifold delivers coolant to the microchannel structure, and a seal consisting of a compressible elastomer is provided between the coolant delivery manifold and the microchannel structure. The integrated circuit chip and microchannel structure are connected together to form a replaceable integrated circuit module which can be easily decoupled from the coolant delivery manifold and the circuit board. The coolant supply manifolds may be disposed between the circuit boards in a stack and coupled to supplies of coolant through a side of the stack.

Bernhardt, A.F.

1993-06-08T23:59:59.000Z

260

Missourian Finds New Opportunity in Energy Industry | Department...  

Broader source: Energy.gov (indexed) [DOE]

something about it." Now Pollack heads up a company doing residential and commercial building audits - and more. The company's chief revenue source is its training program, which...

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

"Annual Electric Power Industry Report (EIA-861 data file)  

Gasoline and Diesel Fuel Update (EIA)

ELECTRICITY DETAILED SURVEY DATA FILES Electric power sales, revenue, and energy efficiency Form EIA-861 detailed data files Release Date for 2013: February 19, 2015 Next Release...

262

Hydrogen Bond Breaking and Reformation in Alcohol Oligomers Following Vibrational Relaxation of a Non-Hydrogen-Bond Donating Hydroxyl Stretch  

E-Print Network [OSTI]

Hydrogen Bond Breaking and Reformation in Alcohol Oligomers Following Vibrational Relaxation of a Non-Hydrogen-Bond Donating Hydroxyl Stretch K. J. Gaffney, I. R. Piletic, and M. D. Fayer* Department measured with ultrafast infrared pump-probe experiments. Non-hydrogen-bond donating OD stretches (2690 cm-1

Fayer, Michael D.

263

Load Management for Industry  

E-Print Network [OSTI]

In the electric utility industry, load management provides the opportunity to control customer loads to beneficially alter a utility's load curve Load management alternatives are covered. Load management methods can be broadly classified into four...

Konsevick, W. J., Jr.

1982-01-01T23:59:59.000Z

264

Utility and Industrial Partnerships  

E-Print Network [OSTI]

In the past decade, many external forces have shocked both utilities and their large industrial customers into seeking more effective ways of coping and surviving. One such way is to develop mutually beneficial partnerships optimizing the use...

Sashihara, T. F.

265

Uranium Industry Annual, 1992  

SciTech Connect (OSTI)

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

Not Available

1993-10-28T23:59:59.000Z

266

Industrial Assessment Center  

SciTech Connect (OSTI)

The University of Dayton (UD) performed energy assessments, trained students and supported USDOE objectives. In particular, the UD Industrial Assessment Center (IAC) performed 96 industrial energy assessment days for mid-sized manufacturers. The average identified and implemented savings on each assessment were $261,080 per year and $54,790 per year. The assessments served as direct training in industrial energy efficiency for 16 UD IAC students. The assessments also served as a mechanism for the UD IAC to understand manufacturing energy use and improve upon the science of manufacturing energy efficiency. Specific research results were published in 16 conference proceedings and journals, disseminated in 22 additional invited lectures, and shared with the industrial energy community through the UD IAC website.

J. Kelly Kissock; Becky Blust

2007-04-17T23:59:59.000Z

267

Ultrasonic evaluation of beryllium-copper diffusion bonds  

SciTech Connect (OSTI)

A study was performed to compare the effectiveness of several advanced ultrasonic techniques when used to determine the strength of diffusion bonded beryllium-copper, which heretofore have each been applied to only a few material systems. The use of integrated backscatter calculations, frequency domain reflection coefficients, and time-of-flight variance was compared in their ability to characterize the bond strength in a series of beryllium-copper diffusion bond samples having a wide variation in bond quality. Correlation of integrated backscatter calculations and time-of-flight variance with bond strength was good. Some correlation of the slope of the frequency based reflection coefficient was shown for medium and high strength bonds, while its Y-intercept showed moderate correlation for all bond strengths.

Jamieson, E.E.

2000-06-08T23:59:59.000Z

268

Industrial Development Fund (North Carolina)  

Broader source: Energy.gov [DOE]

The Industrial Development Fund provides financing grants and loans through designated municipalities and counties to assist in infrastructure improvements for targeted industrial projects. The...

269

NEMS industrial module documentation report  

SciTech Connect (OSTI)

The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

Not Available

1994-01-01T23:59:59.000Z

270

Clean Energy Manufacturing Initiative Industrial Efficiency and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

271

Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst  

E-Print Network [OSTI]

9/13/2007 Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst Department of Mechanical and Industrial Engineering About the Mechanical and Industrial Engineering Industry Advisory Board The purpose of the Mechanical and Industrial Engineering Industry Advisory

Mountziaris, T. J.

272

Bond selective chemistry beyond the adiabatic approximation  

SciTech Connect (OSTI)

One of the most important challenges in chemistry is to develop predictive ability for the branching between energetically allowed chemical reaction pathways. Such predictive capability, coupled with a fundamental understanding of the important molecular interactions, is essential to the development and utilization of new fuels and the design of efficient combustion processes. Existing transition state and exact quantum theories successfully predict the branching between available product channels for systems in which each reaction coordinate can be adequately described by different paths along a single adiabatic potential energy surface. In particular, unimolecular dissociation following thermal, infrared multiphoton, or overtone excitation in the ground state yields a branching between energetically allowed product channels which can be successfully predicted by the application of statistical theories, i.e. the weakest bond breaks. (The predictions are particularly good for competing reactions in which when there is no saddle point along the reaction coordinates, as in simple bond fission reactions.) The predicted lack of bond selectivity results from the assumption of rapid internal vibrational energy redistribution and the implicit use of a single adiabatic Born-Oppenheimer potential energy surface for the reaction. However, the adiabatic approximation is not valid for the reaction of a wide variety of energetic materials and organic fuels; coupling between the electronic states of the reacting species play a a key role in determining the selectivity of the chemical reactions induced. The work described below investigated the central role played by coupling between electronic states in polyatomic molecules in determining the selective branching between energetically allowed fragmentation pathways in two key systems.

Butler, L.J. [Univ. of Chicago, IL (United States)

1993-12-01T23:59:59.000Z

273

Partial-Transient-Liquid-Phase Bonding of Advanced Ceramics Using Surface-Modified Interlayers  

E-Print Network [OSTI]

Alumina Diffusion Bonding and Titanium Active Brazing."O 3 -Titanium Adhesion in the View of the Diffusion Bonding

Reynolds, Thomas Bither

2012-01-01T23:59:59.000Z

274

industrial & systems Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 industrial & systems Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take s e n G i n e e r i n G ( i s e ) ISE 105 Introduction to Industrial and Systems Engineering (2, Fa

Rohs, Remo

275

industrial & systems Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 industrial & systems Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take to introduce the philosophy, subject matter, aims, goals, and techniques of industrial and systems engineering

Rohs, Remo

276

1 Industrial Electron Accelerators type ILU for Industrial Technologies  

E-Print Network [OSTI]

1 Industrial Electron Accelerators type ILU for Industrial Technologies The present work describes industrial electron accelerators of the ILU family. Their main parameters, design, principle of action the pulse linear accelerators type ILU are developed and supplied to the industry. The ILU machines

277

MECH 386 INDUSTRIAL FLUID MECHANICS INDUSTRIAL FLUID MECHANICS  

E-Print Network [OSTI]

MECH 386 ­ INDUSTRIAL FLUID MECHANICS 1 INDUSTRIAL FLUID MECHANICS MECH 386 Contact information Dr This course is an introduction to industrial fluid mechanics. According to J. C. R. Hunt (a famous fluid mechanics specialist): "industrial fluid mechanics broadly covers those aspects of the design, manufacture

278

Repairable chip bonding/interconnect process  

DOE Patents [OSTI]

A repairable, chip-to-board interconnect process which addresses cost and testability issues in the multi-chip modules. This process can be carried out using a chip-on-sacrificial-substrate technique, involving laser processing. This process avoids the curing/solvent evolution problems encountered in prior approaches, as well is resolving prior plating problems and the requirements for fillets. For repairable high speed chip-to-board connection, transmission lines can be formed on the sides of the chip from chip bond pads, ending in a gull wing at the bottom of the chip for subsequent solder.

Bernhardt, Anthony F. (Berkeley, CA); Contolini, Robert J. (Livermore, CA); Malba, Vincent (Livermore, CA); Riddle, Robert A. (Tracy, CA)

1997-01-01T23:59:59.000Z

279

Repairable chip bonding/interconnect process  

DOE Patents [OSTI]

A repairable, chip-to-board interconnect process which addresses cost and testability issues in the multi-chip modules is disclosed. This process can be carried out using a chip-on-sacrificial-substrate technique, involving laser processing. This process avoids the curing/solvent evolution problems encountered in prior approaches, as well is resolving prior plating problems and the requirements for fillets. For repairable high speed chip-to-board connection, transmission lines can be formed on the sides of the chip from chip bond pads, ending in a gull wing at the bottom of the chip for subsequent solder. 10 figs.

Bernhardt, A.F.; Contolini, R.J.; Malba, V.; Riddle, R.A.

1997-08-05T23:59:59.000Z

280

Covalent Bonding in Actinide Sandwich Molecules  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User GroupInformationE-GovNatural GasCourse ClustersCovalent Bonding in

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Qualified Energy Conservation Bonds | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket37963 Vol.Department of EnergyMarchU.S.Bonds

282

The Molecular Bond: October 2014 | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 andThe Molecular Bond: October 2014 The Molecular

283

Qualified Energy Conservation Bond (QECB) Update: New  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L dDepartment of EnergyQualified Energy Conservation Bond (QECB)

284

Qualified Energy Conservation Bonds | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L dDepartment of EnergyQualified EnergyBonds Qualified Energy

285

Covalent Bonding in Actinide Sandwich Molecules  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases on &gamma;-Al2O3. |ID#:Synchrotron RadiationCovalent Bonding

286

Cement Bond Log | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV EconomicsOregon: Energy ResourcesCeilingCement Bond

287

AEO2014: Preliminary Industrial Output  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import CostsLiquids Reserve3.Revenue3 Oil and Gas SupplyFOR:

288

Chemically bonded phospho-silicate ceramics  

DOE Patents [OSTI]

A chemically bonded phospho-silicate ceramic formed by chemically reacting a monovalent alkali metal phosphate (or ammonium hydrogen phosphate) and a sparsely soluble oxide, with a sparsely soluble silicate in an aqueous solution. The monovalent alkali metal phosphate (or ammonium hydrogen phosphate) and sparsely soluble oxide are both in powder form and combined in a stochiometric molar ratio range of (0.5-1.5):1 to form a binder powder. Similarly, the sparsely soluble silicate is also in powder form and mixed with the binder powder to form a mixture. Water is added to the mixture to form a slurry. The water comprises 50% by weight of the powder mixture in said slurry. The slurry is allowed to harden. The resulting chemically bonded phospho-silicate ceramic exhibits high flexural strength, high compression strength, low porosity and permeability to water, has a definable and bio-compatible chemical composition, and is readily and easily colored to almost any desired shade or hue.

Wagh, Arun S. (Orland Park, IL); Jeong, Seung Y. (Westmont, IL); Lohan, Dirk (Chicago, IL); Elizabeth, Anne (Chicago, IL)

2003-01-01T23:59:59.000Z

289

Industrial Decision Making  

E-Print Network [OSTI]

-05-30 Proceedings from the Thirtieth Industrial Energy Technology Conference, New Orleans, LA, May 6-9, 2008. Figure 1. Average Monthly Industrial Energy Prices (2) - 5 10 15 20 25 J an- 0 0 Ju l -0 0 Ja n- 0 1 Ju l -0 1 Ja n - 02 Ju l -0 2 Ja n - 0 3 Ju l - 0 3... Ja n - 0 4 J u l-04 Ja n - 0 5 Jul - 0 5 J an- 0 6 Jul - 0 6 Ja n- 07 Jul - 0 7 Ener gy Pr ic e ($ /MB t u) Electricity Fuel Oil Natural Gas Coal External market forces also drive industrial investment cycles. In the organic chemical...

Elliott, R. N.; McKinney, V.; Shipley, A.

2008-01-01T23:59:59.000Z

290

Emulsified industrial oils recycling  

SciTech Connect (OSTI)

The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

Gabris, T.

1982-04-01T23:59:59.000Z

291

Libyan oil industry  

SciTech Connect (OSTI)

Three aspects of the growth and progress of Libya's oil industry since the first crude oil discovery in 1961 are: (1) relations between the Libyan government and the concessionary oil companies; (2) the impact of Libyan oil and events in Libya on the petroleum markets of Europe and the world; and (3) the response of the Libyan economy to the development of its oil industry. The historical review begins with Libya's becoming a sovereign nation in 1951 and traces its subsequent development into a position as a leading world oil producer. 54 references, 10 figures, 55 tables.

Waddams, F.C.

1980-01-01T23:59:59.000Z

292

Industrial Assessment Center  

SciTech Connect (OSTI)

Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

Dr. Diane Schaub

2007-03-05T23:59:59.000Z

293

1989 Industry Directory  

SciTech Connect (OSTI)

Solid Waste Power's 1989 Industry Directory is divided into three main sections: the Company Directory, the Service Directory, and the Product Directory. The Company Directory lists all companies involved in the waste-to-energy industry that responded to a survey Solid Waste Power conducted in the fall of 1988. Companies are listed alphabetically. Each of the companies in the Company Directory is further referenced in the Service and Product directories follow. The Service and Product directories are broken down into various categories. Within each category is a list of the names of companies identified themselves as providing the service or product. Preceding the Service and Product directories is the Category Index.

Not Available

1998-12-01T23:59:59.000Z

294

Solar industrial process heat  

SciTech Connect (OSTI)

The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

Lumsdaine, E.

1981-04-01T23:59:59.000Z

295

Internal Revenue Service  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Form 5500. Schedule D (Form 5500) 2012 v. 120126 12312012 45-3246495-001 351202784 20-3104541 M 01012012 LANS 401(K) RETIREMENT PLAN LOS ALAMOS NATIONAL SECURITY, LLC 001 LOS...

296

ATIS -- Alternative Revenue Approaches  

E-Print Network [OSTI]

approaches to achieve a self sustaining ATIS, identifywith an emphasis on building a self-sustaining ATIS based onapproaches to achieve a self sustaining ATIS. The emphasis

Yim, Y. B.

2001-01-01T23:59:59.000Z

297

Internal Revenue Service  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponses to Engineered Nanomaterials: The NIEHS1 01/01/2013 LOS

298

Internal Revenue Service  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponses to Engineered Nanomaterials: The NIEHS1 01/01/2013 LOS2

299

Internal Revenue Service  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponses to Engineered Nanomaterials: The541990 FILED WITH

300

Internal Revenue Service  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponses to Engineered Nanomaterials: The541990 FILED WITH1

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Internal Revenue Service  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponses to Engineered Nanomaterials: The541990 FILED WITH12

302

Industrial Energy Use Indices  

E-Print Network [OSTI]

of variations for all industry types in warm versus cold regions of the U.S. generally is greater than unity. Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used...

Hanegan, A.; Heffington, W. M.

2007-01-01T23:59:59.000Z

303

Industry Partners Panel  

Broader source: Energy.gov [DOE]

Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

304

INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER  

SciTech Connect (OSTI)

The U. S. Department of Energy’s Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

MELINDA KRAHENBUHL

2010-05-28T23:59:59.000Z

305

Industrial Retrofits are Possible  

E-Print Network [OSTI]

Ontario is the industrial heartland of Canada and more than 80% of its energy comes from Canadian sources with the remainder from the neighbouring U.S. states. Because of the ever increasing demand for energy relating to increased economic activity...

Stobart, E. W.

306

Petroleum industry in Iran  

SciTech Connect (OSTI)

This study examines the oil industry in Iran from the early discovery of oil nearly two hundred years ago in Mazandaran (north part) to the development of a giant modern industry in the twentieth century. Chapter I presents a brief historical setting to introduce the reader to the importance of oil in Iran. It focuses on the economic implications of the early oil concessions in the period 1901 to 1951. Chapter II discusses the nationalization of the Iranian oil industry and creation of NIOC in 1951 and the international political and economic implication of these activities. Chapter III explains the activities of NIOC in Iran. Exploration and drilling, production, exports, refineries, natural gas, petrochemicals and internal distributions are studied. Chapter IV discusses the role of the development planning of Iran. A brief presentation of the First Development Plan through the Fifth Development Plan is given. Sources and uses of funds by plan organization during these Five Plans is studied. The Iran and Iraq War is also studied briefly, but the uncertainty of its resolution prevents any close analysis of its impact on the Iranian oil industry. One conclusion, however, is certain; oil has been a vital resource in Iran's past and it will remain the lifetime of its economic development in the future.

Farideh, A.

1981-01-01T23:59:59.000Z

307

Torsion Testing of Diffusion Bonded LIGA Formed Nickel  

SciTech Connect (OSTI)

A test technique has been devised which is suitable for the testing of the bond strength of batch diffusion bonded LIGA or DXRL defined structures. The method uses a torsion tester constructed with the aid of LIGA fabrication and distributed torsion specimens which also make use of the high aspect ratio nature of DXRL based processing. Measurements reveal achieved bond strengths of 130MPa between electroplated nickel with a bond temperature of 450 C at 7 ksi pressure which is a sufficiently low temperature to avoid mechanical strength degradation.

Buchheit, T.E.; Christenson, T.R.; Schmale, D.T.

1999-01-27T23:59:59.000Z

308

Effects of atmospheres on bonding characteristics of silver and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

temperature. To investigate the effects of atmospheres on the bonding characteristics of ceramic joints brazed with Ag-CuO braze filler metals, alumina joints prepared using a...

309

FITCH RATES ENERGY NORTHWEST (WA) ELECTRIC REV REF BONDS 'AA...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FITCH RATES ENERGY NORTHWEST (WA) ELECTRIC REV REF BONDS 'AA'; OUTLOOK STABLE Fitch Ratings-Austin-08 April 2015: Fitch Ratings assigns 'AA' ratings to the following Energy...

310

Qualified Energy Conservation Bonds (QECBs) APPENDIX A: QECB...  

Broader source: Energy.gov (indexed) [DOE]

Qualified energy conservation bonds appendices. Author: U. S. Department of Energy Appendix A: QECB Counsel, Underwriters, Banks and Trustees More Documents & Publications...

311

Hydrogen-Bond Networks: Strengths of Different Types of Hydrogen...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

energetic driving force for enzyme catalysis and conformational changes such as in protein folding due to multiple hydrogen bonds in a HBN. Citation: Shokri A, Y Wang, GA...

312

ORNL: Low-Cost Direct Bonded Aluminum (DBA) Substrates (Agreement...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Direct Bonded Aluminum (DBA) Substrates (Agreement ID:23278) 2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

313

ORNL: Low-Cost Direct Bonded Aluminum (DBA) Substrates (Agreement...  

Broader source: Energy.gov (indexed) [DOE]

Low-Cost Direct Bonded Aluminum (DBA) Substrates H. -T. Lin, A. A. Wereszczak, and S. Waters Oak Ridge National Laboratory This presentation does not contain any proprietary,...

314

Energetics of Hydrogen Bond Network Rearrangements in Liquid...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energetics of Hydrogen Bond Network Rearrangements in Liquid Water Print The unique chemical and physical properties of liquid water are thought to result from the highly...

315

adhesively bonded shell: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

various conditions, including the type of surface preparation, pH of the environmental media, (more) Xu, Dingying 2004-01-01 2 Bond Characteristics and Qualifications of...

316

Sell-in versus Sell-through Revenue Recognition: An Examination of Firm Characteristics and Financial Information Quality  

E-Print Network [OSTI]

equipment industries that use either the sell-in method or the sell-through method. I find that firms with higher growth opportunities and strong corporate governance are less likely to use the sell-in method. In addition, corporate governance strength...

Rasmussen, Stephanie Jean Binger

2010-10-12T23:59:59.000Z

317

Wafer bonded epitaxial templates for silicon heterostructures  

DOE Patents [OSTI]

A heterostructure device layer is epitaxially grown on a virtual substrate, such as an InP/InGaAs/InP double heterostructure. A device substrate and a handle substrate form the virtual substrate. The device substrate is bonded to the handle substrate and is composed of a material suitable for fabrication of optoelectronic devices. The handle substrate is composed of a material suitable for providing mechanical support. The mechanical strength of the device and handle substrates is improved and the device substrate is thinned to leave a single-crystal film on the virtual substrate such as by exfoliation of a device film from the device substrate. An upper portion of the device film exfoliated from the device substrate is removed to provide a smoother and less defect prone surface for an optoelectronic device. A heterostructure is epitaxially grown on the smoothed surface in which an optoelectronic device may be fabricated.

Atwater, Jr., Harry A. (So. Pasadena, CA); Zahler, James M. (Pasadena, CA); Morral, Anna Fontcubera I (Paris, FR)

2008-03-11T23:59:59.000Z

318

Method of bonding single crystal quartz by field-assisted bonding  

DOE Patents [OSTI]

The method of producing a hermetic stable structural bond between quartz crystals includes providing first and second quartz crystals and depositing thin films of borosilicate glass and silicon on portions of the first and second crystals, respectively. The portions of the first and second crystals are then juxtaposed in a surface contact relationship and heated to a temperature for a period sufficient to cause the glass and silicon films to become electrically conductive. An electrical potential is then applied across the first and second crystals for creating an electrostatic field between the adjoining surfaces and causing the juxtaposed portions to be attracted into an intimate contact and form a bond for joining the adjoining surfaces of the crystals.

Curlee, Richard M. (Tijeras, NM); Tuthill, Clinton D. (Edgewood, NM); Watkins, Randall D. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

319

Essays on the industrial organization of the airline industry  

E-Print Network [OSTI]

This thesis analyzes several aspects of the Industrial Organization of the airline industry in three separate chapters. Chapter 1 investigates the effect of air traffic delays on airline prices. The degree to which prices ...

Januszewski, Silke I. (Silke Irene), 1974-

2003-01-01T23:59:59.000Z

320

Coal industry annual 1997  

SciTech Connect (OSTI)

Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

NONE

1998-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Coal industry annual 1993  

SciTech Connect (OSTI)

Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

Not Available

1994-12-06T23:59:59.000Z

322

SymposiumandIndustrialAffiliatesProgramLightinAction Industrial Affiliates Program  

E-Print Network [OSTI]

SymposiumandIndustrialAffiliatesProgramLightinAction #12;Industrial Affiliates Program Friday, 8 Session I Abstract: Recently Additive Manufacturing (AM) has been hailed as the "third industrial revolution" by Economist magazine [April -2012]. Precision of the product manufactured by AM largely depends

Van Stryland, Eric

323

Recent developments: Industry briefs  

SciTech Connect (OSTI)

This article is the `Industry Briefs` portion of Nuexco`s July 1992 `Recent Developments` section. Specific items mentioned include: (1) the merger of Entergy and Gulf States Utilities, (2) restart of the Sequoyah Fuels facility in Oklahoma, (3) development of the 7th and 8th nuclear units in Taiwan, (4) purchase of interest in Rio Algom, Ltd, and (5) acquisition of the Italian firm AGIP by a Canadian company.

NONE

1992-07-01T23:59:59.000Z

324

Industrial Analytics Corporation  

SciTech Connect (OSTI)

The lost foam casting process is sensitive to the properties of the EPS patterns used for the casting operation. In this project Industrial Analytics Corporation (IAC) has developed a new low voltage x-ray instrument for x-ray radiography of very low mass EPS patterns. IAC has also developed a transmitted visible light method for characterizing the properties of EPS patterns. The systems developed are also applicable to other low density materials including graphite foams.

Industrial Analytics Corporation

2004-01-30T23:59:59.000Z

325

BTU Accounting for Industry  

E-Print Network [OSTI]

, salesmen cars, over the highway trucks, facilities startup, waste used as fuel and fuels received for storage. This is a first step in the DOE's effort to establish usage guidelines for large industrial users and, we note, it requires BTU usage data...-generated electricity, heating, ventilating, air conditioning, in-plant transportation, ore hauling, raw material storage and finished product warehousing. Categories which are excluded are corporate and divisional offices, basic research, distribution centers...

Redd, R. O.

1979-01-01T23:59:59.000Z

326

Quantum Finance Hamiltonian for Coupon Bond European and Barrier Options  

E-Print Network [OSTI]

Quantum Finance Hamiltonian for Coupon Bond European and Barrier Options Belal E. Baaquie RMI are financial derivatives that can be analyzed in the Hamiltonian formulation of quantum finance. Forward-2963 Fax: (65) 6777-6126 Email: phybeb@nus.edu.sg #12;Quantum Finance Hamiltonian for Coupon Bond European

Chaudhuri, Sanjay

327

BOND PROPERTIES OF CFCC PRESTRESSING STRANDS IN PRETENSIONED CONCRETE BEAMS  

E-Print Network [OSTI]

BOND PROPERTIES OF CFCC PRESTRESSING STRANDS IN PRETENSIONED CONCRETE BEAMS by Nolan G. Domenico plastic prestressing strands (CFCC) in pretensioned concrete beams. The bond characteristics are examined for 15.2 mm diameter and 12.5 mm diameter seven-wire CFCC strands. Ten prestressed concrete beams

328

Time- and temperature-dependent failures of a bonded joint  

SciTech Connect (OSTI)

Time and temperature dependent properties of a tubular lap bonded joint are reported. The joint bonds a cast iron rod and a composite pipe together with an epoxy type of an adhesive material containing chopped glass fiber. A new fabrication method is proposed.

Sihn, Sangwook; Miyano, Yasushi; Tsai, S.W. [Stanford Univ., Palo Alto, CA (United States)

1997-07-01T23:59:59.000Z

329

The impact of government policies on industrial evolution : the case of China's automotive industry  

E-Print Network [OSTI]

Governmental industrial policies have great influence on industrial performances and development trajectories. The infant industry theory has been the dominating theoretical foundation of the industrial policies in developing ...

Luo, Jianxi

2006-01-01T23:59:59.000Z

330

Industrial Heat Pump Design Options  

E-Print Network [OSTI]

There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

Gilbert, J. S.

331

A National Resource for Industry  

E-Print Network [OSTI]

alloys, and metal matrix composite products carbon fibe's manufacturing industries. These industries call upon ORNL's expertise in materials synthesis, characterization-efficient manufacturing processes and materials targeting products of the future. The Department of Energy's first

332

Electrotechnologies and Industrial Pollution Control  

E-Print Network [OSTI]

The role of electrotechnologies in the control of emissions and effluents from industrial processes is discussed. Matrices are presented identifying those electrotechnologies which impact pollution in various industries. Specific examples...

Schmidt, P. S.

333

Deaerators in Industrial Steam Systems  

SciTech Connect (OSTI)

This revised ITP tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

334

Texas Industries of the Future  

E-Print Network [OSTI]

The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs...

Ferland, K.

335

Modeling the semiconductor industry dynamics  

E-Print Network [OSTI]

The semiconductor industry is an exciting and challenging industry. Strong demand at the application end, plus the high capital intensity and rapid technological innovation in manufacturing, makes it difficult to manage ...

Wu, Kailiang

2008-01-01T23:59:59.000Z

336

Electrically conductive resinous bond and method of manufacture  

DOE Patents [OSTI]

A method of bonding elements together with a bond of high strength and good electrical conductivity which comprises: applying an unfilled polyimide resin between surfaces of the elements to be bonded, heat treating said unfilled polyimide resin in stages between a temperature range of about 40 to 365/sup 0/C to form a strong adhesive bond between said elements, applying a metal-filled polyimide resin overcoat between said elements so as to provide electrical connection therebetween, and heat treating said metal-filled polyimide resin with substantially the same temperature profile as the unfilled polyimide resin. The present invention is also concerned with an adhesive, resilient, substantially void free bonding combination for providing a high strength, electrically conductive adhesive attachment between electrically conductive elements which comprises a major amount of an unfilled polyimide resin and a minor amount of a metal-filled polyimide resin.

Snowden, T.M. Jr.; Wells, B.J.

1985-01-01T23:59:59.000Z

337

Innovative Utility Pricing for Industry  

E-Print Network [OSTI]

INNOVATIVE UTILITY PRICING FOR INDUSTRY James A. Ross Drazen-Brubaker &Associates, Inc. St. Louis, Missouri ABSTRACT The electric utility industry represents only one source of power available to industry. Al though the monopolistic... structure of the electric utility industry may convey a perception that an electric utility is unaffected by competition, this is an erroneous perception with regard to in dustry. Electric utilities face increased compe tition, both from other utilities...

Ross, J. A.

338

PETROLEUM INDUSTRY INFORMATION REPORTING ACT  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION PETROLEUM INDUSTRY INFORMATION REPORTING ACT: RULEMAKING;1 EXECUTIVE SUMMARY In the six months since the new Petroleum Industry Information Reporting Act (PIIRA which is used by the petroleum industry and market trading groups to assess the trends in California

339

Diffusion-Welded Microchannel Heat Exchanger for Industrial Processes  

SciTech Connect (OSTI)

The goal of next generation reactors is to increase energy ef?ciency in the production of electricity and provide high-temperature heat for industrial processes. The ef?cient transfer of energy for industrial applications depends on the ability to incorporate effective heat exchangers between the nuclear heat transport system and the industrial process. The need for ef?ciency, compactness, and safety challenge the boundaries of existing heat exchanger technology. Various studies have been performed in attempts to update the secondary heat exchanger that is downstream of the primary heat exchanger, mostly because its performance is strongly tied to the ability to employ more ef?cient industrial processes. Modern compact heat exchangers can provide high compactness, a measure of the ratio of surface area-to-volume of a heat exchange. The microchannel heat exchanger studied here is a plate-type, robust heat exchanger that combines compactness, low pressure drop, high effectiveness, and the ability to operate with a very large pressure differential between hot and cold sides. The plates are etched and thereafter joined by diffusion welding, resulting in extremely strong all-metal heat exchanger cores. After bonding, any number of core blocks can be welded together to provide the required ?ow capacity. This study explores the microchannel heat exchanger and draws conclusions about diffusion welding/bonding for joining heat exchanger plates, with both experimental and computational modeling, along with existing challenges and gaps. Also, presented is a thermal design method for determining overall design speci?cations for a microchannel printed circuit heat exchanger for both supercritical (24 MPa) and subcritical (17 MPa) Rankine power cycles.

Piyush Sabharwall; Denis E. Clark; Michael V. Glazoff; Michael G. McKellar; Ronald E. Mizia

2013-03-01T23:59:59.000Z

340

Theoretical Electron Density Distributions for Fe-and Cu-Sulfide Earth Materials: A Connection between Bond Length, Bond Critical Point Properties, Local Energy Densities,  

E-Print Network [OSTI]

, Biomolecular and Chemical Sciences, UniVersity of Western Australia, Australia ReceiVed: August 7, 2006 between Bond Length, Bond Critical Point Properties, Local Energy Densities, and Bonded Interactions G. V; In Final Form: December 6, 2006 Bond critical point and local energy density properties together with net

Downs, Robert T.

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Industrial Energy Audit Guidebook: Guidelines for Conducting...  

Open Energy Info (EERE)

Industry Resource Type: Guidemanual Website: china.lbl.govsiteschina.lbl.govfilesLBNL-3991E.Industrial%20Energy Industrial Energy Audit Guidebook: Guidelines for Conducting...

342

Colorado Industrial Challenge and Recognition Program | Department...  

Broader source: Energy.gov (indexed) [DOE]

Colorado Industrial Challenge and Recognition Program Colorado Industrial Challenge and Recognition Program This fact sheet offers details of the Colorado Industrial program state...

343

Industrial energy use indices  

E-Print Network [OSTI]

gas consumption. Data from milder climates appears more scattered than that from colder climates. For example, the ratio of the average of coefficient of variations for all industry types in warm versus cold regions of the U.S. varies from 1....1 to 1.7 depending on the energy sources considered. The large data scatter indicates that predictions of energy use obtained by multiplying standard EUI data by plant area may be inaccurate and are less accurate in warmer than colder climates (warmer...

Hanegan, Andrew Aaron

2008-10-10T23:59:59.000Z

344

Coal Industry Annual 1995  

SciTech Connect (OSTI)

This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

NONE

1996-10-01T23:59:59.000Z

345

Carbon Emissions: Food Industry  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998 10,643 10,998 10,998 10,64397 272 522 542Peru (MillionFood Industry

346

Sustainable Nanomaterials Industry Perspective  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy Strain Rate4SuperhardSuspect andCoaches Aim Industry Perspective

347

CASL - Industry Council  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science, andAnalysis ofLink to Resources Industry

348

CASL - Industry Council Resources  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science, andAnalysis ofLink to Resources IndustryCASL

349

Industrial Technical Assistance  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe U.S.Indiana College ProvidesSteam Technical BriefINDUSTRIAL

350

Coal industry annual 1996  

SciTech Connect (OSTI)

This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

NONE

1997-11-01T23:59:59.000Z

351

Transient-Liquid-Phase (TLP) Bonding of Al2O3 Using Nb-based Multilayer Interlayers  

E-Print Network [OSTI]

Alumina Diffusion Bonding and Titanium Active Brazing.Requirements for Diffusion Bonding Titanium. In: Jaffee RI,O 3 -Titanium Adhesion in the View of the Diffusion Bonding

Hong, Sung Moo

2009-01-01T23:59:59.000Z

352

Transient-Liquid-Phase (TLP) Bonding of Al2O3 Using Nb-based Multilayer Interlayers  

E-Print Network [OSTI]

p. 539-44. Derby B. Diffusion Bonding. In: Nicholas M (ed).Requirements for Diffusion Bonding Titanium. In: Jaffee RI,Contact During Diffusion Bonding. Metallurgical Transactions

Hong, Sung Moo

2009-01-01T23:59:59.000Z

353

E-Print Network 3.0 - adhesively bonded lap Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The lap-shear strengths of adhesively bonded polystyrene (PS), high-density polyethylene (HDPE... bonded in a lap-shear geometry. The bonded area of adhesion was nominally...

354

Preliminary Characterisation of Low-Temperature Bonded Copper Interconnects for 3-D Integrated Circuits  

E-Print Network [OSTI]

Three dimensional (3-D) integrated circuits can be fabricated by bonding previously processed device layers using metal-metal bonds that also serve as layer-to-layer interconnects. Bonded copper interconnects test structures ...

Leong, Hoi Liong

355

Hydrogen Bond Dynamics Probed with Ultrafast Infrared Heterodyne-Detected Multidimensional Vibrational Stimulated Echoes  

E-Print Network [OSTI]

Hydrogen Bond Dynamics Probed with Ultrafast Infrared Heterodyne-Detected Multidimensional, USA (Received 24 February 2003; published 3 December 2003) Hydrogen bond dynamics are explicated hydrogen bonded network are measured with ultrashort (

Fayer, Michael D.

356

Hydrogen-Bond Networks: Strengths of Different Types of Hydrogen Bonds and An Alternative to the Low Barrier Hydrogen-Bond Proposal  

SciTech Connect (OSTI)

We report quantifying the strengths of different types of hydrogen bonds in hydrogen bond networks (HBNs) via measurement of the adiabatic electron detachment energy of the conjugate base of a small covalent polyol model compound (i.e., (HOCH2CH2CH(OH)CH2)2CHOH) in the gas phase and the pKa of the corresponding acid in DMSO. The latter result reveals that the hydrogen bonds to the charged center and those that are one solvation shell further away (i.e., primary and secondary) provide 5.3 and 2.5 pKa units of stabilization per hydrogen bond in DMSO. Computations indicate that these energies increase to 8.4 and 3.9 pKa units in benzene and that the total stabilizations are 16 (DMSO) and 25 (benzene) pKa units. Calculations on a larger linear heptaol (i.e., (HOCH2CH2CH(OH)CH2CH(OH)CH2)2CHOH) reveal that the terminal hydroxyl groups each contribute 0.6 pKa units of stabilization in DMSO and 1.1 pKa units in benzene. All of these results taken together indicate that the presence of a charged center can provide a powerful energetic driving force for enzyme catalysis and conformational changes such as in protein folding due to multiple hydrogen bonds in a HBN.

Shokri, Alireza; Wang, Yanping; O'Doherty, George A.; Wang, Xue B.; Kass, Steven R.

2013-11-27T23:59:59.000Z

357

Competitive developments in the electric supply industry  

SciTech Connect (OSTI)

Competition in the electric supply industry is outlined. The following topics are discussed: six impending major developments in the electric industry; recent and projected developments in the industry; where is the industry headed?; and what the future holds.

Bruder, G.F.; Lively, M.

1996-12-31T23:59:59.000Z

358

Whitacre College of Engineering Industrial Engineering Department  

E-Print Network [OSTI]

Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

Gelfond, Michael

359

Faculty of Engineering & Design Industrial Placements  

E-Print Network [OSTI]

Faculty of Engineering & Design Industrial Placements A guide for industry #12;Industrial placements The Faculty of Engineering & Design has built close links with engineering companies through research, projects, placements and graduate employees. We know that working with industry ensures our

Burton, Geoffrey R.

360

Research Projects in Industrial Technology.  

SciTech Connect (OSTI)

The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the industrial sector, as well as other sectors, in its 1986 Power Plan. Specifically, the Council recommended that BPA operate a research and development program in conjunction with industry to determine the potential costs and savings from efficiency improvements in industrial processes which apply to a wide array of industrial firms.'' The section, composed of multidisciplinary engineers, provides technical support to the Industrial Programs Branch by designing and carrying out research relating to energy conservation in the industrial sector. The projects contained in this booklet are arranged by sector --industrial, utility, and agricultural -- and, within each sector, chronologically from ongoing to completed, with those projects completed most recently falling first. For each project the following information is given: its objective approach, key findings, cost, and contact person. Completed projects also include the date of completion, a report title, and report number.

United States. Bonneville Power Administration. Industrial Technology Section.

1990-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Semi-flexible hydrogen-bonded and non-hydrogen bonded lattice polymers  

E-Print Network [OSTI]

We investigate the addition of stiffness to the lattice model of hydrogen-bonded polymers in two and three dimensions. We find that, in contrast to polymers that interact via a homogeneous short-range interaction, the collapse transition is unchanged by any amount of stiffness: this supports the physical argument that hydrogen bonding already introduces an effective stiffness. Contrary to possible physical arguments, favouring bends in the polymer does not return the model's behaviour to that comparable to the semi-flexible homogeneous interaction model, where the canonical $\\theta$-point occurs for a range of parameter values. In fact, for sufficiently large bending energies the crystal phase disappears altogether, and no phase transition of any type occurs. We also compare the order-disorder transition from the globule phase to crystalline phase in the semi-flexible homogeneous interaction model to that for the fully-flexible hybrid model with both hydrogen and non-hydrogen like interactions. We show that these phase transitions are of the same type and are a novel polymer critical phenomena in two dimensions. That is, it is confirmed that in two dimensions this transition is second-order, unlike in three dimensions where it is known to be first order. We also estimate the crossover exponent and show that there is a divergent specific heat, finding $\\phi=0.7(1)$ or equivalently $\\alpha=0.6(2)$. This is therefore different from the $\\theta$ transition, for which $\\alpha=-1/3$.

J Krawczyk; AL Owczarek; T Prellberg

2008-07-06T23:59:59.000Z

362

industrial & systems (ISE) Industrial and Systems Engineers use engineering and business principles  

E-Print Network [OSTI]

70 industrial & systems (ISE) Industrial and Systems Engineers use engineering and business systems to help companies compete in today's global marketplace. The Industrial and Systems Engineer. Programs Available · Industrial and Systems Engineering Bachelor of Science 129 units · Industrial

Rohs, Remo

363

industrial & systems (ISE) Industrial and Systems engineers use engineering and business principles  

E-Print Network [OSTI]

74 industrial & systems (ISE) Industrial and Systems engineers use engineering and business to help companies compete in today's global marketplace. The Industrial and Systems engineer's task. Programs Available · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial

Rohs, Remo

364

Office of Industry Research and Technology Programs Greetings to Industry  

E-Print Network [OSTI]

Assistant Vice President, Corporate & Foundation Relations Inside this issue... Greetings to Industry. The founding members are American Axle and Manufacturing, Eaton Corpora- tion and John Deere. This applied

Ginzel, Matthew

365

E-Print Network 3.0 - affects durably bonding Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

adhesive layers are less affected, creep behavior of adhesively bonded joints... ABSTRACT SMITH, GLEN. Bond Characteristics and Qualifications of Adhesives for ... Source:...

366

E-Print Network 3.0 - adhesive bond strength Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The lap-shear strengths of adhesively bonded polystyrene (PS), high-density polyethylene (HDPE... 12;strength of the substrate, or the adhesive strength of the bond 9....

367

E-Print Network 3.0 - amide bonds stabilize Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Amide-Amide and Amide-Water Hydrogen Bonds Summary: Bonds: Implicationsfor Protein Folding and Stability Eric S.Eberhardt and Ronald T. Rained Department... folds, many of...

368

Rebuttal: Interacting With the Pharmaceutical Industry  

E-Print Network [OSTI]

9. 6. Angell M. The pharmaceutical industry: To whom is ithas shown that the pharmaceutical industry has profited some

Stone, Susan; Herbert, Mel

2003-01-01T23:59:59.000Z

369

ITP Industrial Materials: Development and Commercialization of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Industrial Materials: Development and Commercialization of Alternative Carbon Fiber Precursors and Conversion Technologies ITP Industrial Materials: Development and...

370

Academic-Industry Collaboration (AIC) - Synchrophasor Engineering...  

Broader source: Energy.gov (indexed) [DOE]

Academic-Industry Collaboration (AIC) - Synchrophasor Engineering Education Program: Information Exchange Webinar (March 6, 2014) Academic-Industry Collaboration (AIC) -...

371

Surface Modification by Atmospheric Pressure Plasma for Improved Bonding  

E-Print Network [OSTI]

prepared using (a) the IPA wipe (control), (b) sanding, (c)of aluminum alloy 2024: a) IPA wiped, b) sanded with 180bond primer with a) the IPA wipe (control), b) sanding, c)

Williams, Thomas Scott

2013-01-01T23:59:59.000Z

372

Spectroscopic investigations of hydrogen bond dynamics in liquid water  

E-Print Network [OSTI]

Many of the remarkable physical and chemical properties of liquid water are due to the strong influence hydrogen bonds have on its microscopic dynamics. However, because of the fast timescales involved, there are relatively ...

Fecko, Christopher J., 1975-

2004-01-01T23:59:59.000Z

373

Bond resonance energy and verification of the isolated pentagon rule  

SciTech Connect (OSTI)

The isolated pentagon rule (IPR) states that fullerenes with isolated pentagons are kinetically much more stable than their fused pentagon counterparts. This rule can be verified in terms of a graph-theoretically defined bond resonance energy. In general, a {pi} bond shared by two pentagons has a large negative bond resonance energy, thus contributing significantly to the increase in kinetic instability or chemical reactivity of the molecule. The existence of such highly antiaromatic local structures sharply distinguishes IPR-violating fullerenes from isolated-pentagon isomers. {pi}bonds shared by two pentagons are shared by many antiaromatic conjugated circuits but not by relatively small aromatic conjugated circuits. 39 refs., 3 figs., 5 tabs.

Aihara, Jun Ichi [Shizuoka Univ. (Japan)

1995-04-12T23:59:59.000Z

374

aliphatic ch bonds: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2015-01-01 39 H-atom high-n Rydberg time-of-flight spectroscopy of CH bond fission in acrolein dissociated at 193 nm Chemistry Websites Summary: H-atom high-n Rydberg...

375

Creep effects in diffusion bonding of oxygen-free copper  

E-Print Network [OSTI]

Diffusion is the transport of atoms or particles through the surrounding material. Various microstructural changes in metals are based on the diffusion phenomena. In solid metals the diffusion is closely related to crystallographic defects. In single-component metals the dominant mechanism of diffusion is the vacancy mechanism. Diffusion bonding is a direct technological application of diffusion. It is an advanced solidstate joining process in which the surfaces of two components are brought to contact with each other and heated under a pressing load in a controlled environment. During the process, the contact surfaces are bonded by atomic diffusion across the interface and as a result, one solid piece is formed. The condition of high temperature and low applied stress combined with relatively long process duration enables the creep effects to take place in bonded metals. Furthermore, creep causes unwanted permanent deformations in the bonded components. Some authors suggest that there could be a threshold fo...

Moilanen, Antti

376

Resummed thermodynamic perturbation theory for bond cooperativity in associating fluids  

SciTech Connect (OSTI)

We develop a resummed thermodynamic perturbation theory for bond cooperativity in associating fluids by extension of Wertheim's multi-density formalism. We specifically consider the case of an associating hard sphere with two association sites and both pairwise and triplet contributions to the energy, such that the first bond in an associated cluster receives an energy ??{sup (1)} and each subsequent bond in the cluster receives an energy ??{sup (2)}. To test the theory we perform new Monte Carlo simulations for potentials of this type. Theory and simulation are found to be in excellent agreement. We show that decreasing the energetic benefit of hydrogen bonding can actually result in a decrease in internal energy in the fluid. We also predict that when ?{sup (1)} = 0 and ?{sup (2)} is nonzero there is a transition temperature where the system transitions from a fluid of monomers to a mixture of monomers and very long chains.

Marshall, Bennett D., E-mail: bennettd1980@gmail.com; Chapman, Walter G. [Department of Chemical and Biomolecular Engineering, Rice University, 6100 S. Main, Houston, Texas 77005 (United States)] [Department of Chemical and Biomolecular Engineering, Rice University, 6100 S. Main, Houston, Texas 77005 (United States)

2013-12-07T23:59:59.000Z

377

FITCH RATES PORT OF MORROW (OR) TRANSMISSION FACILITIES REV BONDS...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FITCH RATES PORT OF MORROW (OR) TRANSMISSION FACILITIES REV BONDS 'AA'; OUTLOOK STABLE Fitch Ratings-Austin-24 November 2014: Fitch Ratings assigns 'AA' ratings to the Port of...

378

Low-Cost Financing with Clean Renewable Energy Bonds  

Broader source: Energy.gov [DOE]

Contains information from the TAP Webcast on June 24, 2009 on clean renewable energy bonds from Claire Kreycik on feed-in tariffs, an economic resource for developing renewable energy.

379

Application of Social Impact Bonds in Built Infrastructure Sustainability Projects  

E-Print Network [OSTI]

This study examines a first look at the implementation of Social Impact Bonds (SIB) for sustainability projects by comparing two cases. The cases are described using System Dynamic (SD) modeling to portray the feedback structures and characteristics...

White, Robert Joseph

2014-05-01T23:59:59.000Z

380

Foreign trade zones and bonded warehouses for luxury goods  

E-Print Network [OSTI]

We explore and compare the benefits of establishing and operating Foreign Trade Zones (FTZs) and Bonded Warehouses (BWs) for luxury goods in North America, using the case of the distribution network of Ralph Lauren Corporation ...

Petrova, Nadya (Nadya Naydenova)

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Low-Cost Direct Bonded Aluminum (DBA) Substrates  

Broader source: Energy.gov (indexed) [DOE]

Low-Cost Direct Bonded Aluminum (DBA) Substrates H. -T. Lin, A. A. Wereszczak, M. L. Santella, and G. Muralidharan Oak Ridge National Laboratory (ORNL) This presentation does not...

382

Mpemba paradox: Hydrogen bond memory and water-skin supersolidity  

E-Print Network [OSTI]

Numerical reproduction of measurements, experimental evidence for skin super-solidity and hydrogen-bond memory clarified that Mpemba paradox integrates the heat emission-conduction-dissipation dynamics in the source-path-drain cycle system.

Chang Q Sun

2015-01-05T23:59:59.000Z

383

Ultrafast structural fluctuations and rearrangements of water's hydrogen bonded network  

E-Print Network [OSTI]

Aqueous chemistry is strongly influenced by water's ability to form an extended network of hydrogen bonds. It is the fluctuations and rearrangements of this network that stabilize reaction products and drive the transport ...

Loparo, Joseph J. (Joseph John)

2007-01-01T23:59:59.000Z

384

Bond Distortions in Armchair Type Single Wall Carbon Nanotubes  

E-Print Network [OSTI]

The energy band gap structure and stability of (3,3) and (10,10) nanotubes have been comparatively investigated in the frameworks of the traditional form of the Su-Schrieffer-Heeger (SSH) model and a toy model including the contributions of bonds of different types to the SSH Hamiltonian differently. Both models give the same energy band gap structure but bond length distortions in different characters for the nanotubes.

N. Sunel; E. Rizaoglu; K. Harigaya; O. Ozsoy

2005-03-03T23:59:59.000Z

385

Microbial cleavage of organic C-S bonds  

DOE Patents [OSTI]

A microbial process is described for selective cleavage of organic C-S bonds which may be used for reducing the sulfur content of sulfur-containing organic carbonaceous materials. Microorganisms of Rhodococcus rhodochrous and Bacillus sphaericus have been found which have the ability of selective cleavage of organic C-S bonds. Particularly preferred microorganisms are Rhodococcus rhodochrous strain ATCC 53968 and Bacillus sphaericus strain ATCC 53969 and their derivatives.

Kilbane, J.J. II.

1994-10-25T23:59:59.000Z

386

BN Bonded BN fiber article and method of manufacture  

DOE Patents [OSTI]

A boron nitride bonded boron nitride fiber article and the method for its manufacture which comprises forming a shaped article with a composition comprising a bonding compound selected from boron oxide and boric acid and a structural fiber selected from the group consisting of boron oxide, boron nitride and partially nitrided boron oxide fibers, heating the composition in an anhydrous gas to a temperature above the melting point of the compound and nitriding the resulting article in ammonia gas.

Hamilton, Robert S. (Youngstown, NY)

1981-08-18T23:59:59.000Z

387

Mercury stabilization in chemically bonded phosphate ceramics  

SciTech Connect (OSTI)

Mercury stabilization and solidification is a significant challenge for conventional stabilization technologies. This is because of the stringent regulatory limits on leaching of its stabilized products. In a conventional cement stabilization process, Hg is converted at high pH to its hydroxide, which is not a very insoluble compound; hence the preferred route for Hg sulfidation to convert it into insoluble cinnabar (HgS). Unfortunately, efficient formation of this compound is pH-dependent. At a high pH, one obtains a more soluble Hg sulfate, in a very low pH range, insufficient immobilization occurs because of the escape of hydrogen sulfide, while efficient formation of HgS occurs only in a moderately acidic region. Thus, the pH range of 4 to 8 is where stabilization with Chemically Bonded Phosphate Ceramics (CBPC) is carried out. This paper discusses the authors experience on bench-scale stabilization of various US Department of Energy (DOE) waste streams containing Hg in the CBPC process. This process was developed to treat DOE's mixed waste streams. It is a room-temperature-setting process based on an acid-base reaction between magnesium oxide and monopotassium phosphate solution that forms a dense ceramic within hours. For Hg stabilization, addition of a small amount (< 1 wt.%) of Na{sub 2}S or K{sub 2}S is sufficient in the binder composition. Here the Toxicity Characteristic Leaching Procedure (TCLP) results on CBPC waste forms of surrogate waste streams representing secondary Hg containing wastes such as combustion residues and Delphi DETOX{trademark} residues are presented. The results show that although the current limit on leaching of Hg is 0.2 mg/L, the results from the CBPC waste forms are at least one order lower than this stringent limit. Encouraged by these results on surrogate wastes, they treated actual low-level Hg-containing mixed waste from their facility at Idaho. TCLP results on this waste are presented here. The efficient stabilization in all these cases is attributed to chemical immobilization as both a sulfide (cinnabar) and a phosphate, followed by its physical encapsulation in a dense matrix of the ceramic.

Wagh, A. S.; Singh, D.; Jeong, S. Y.

2000-04-04T23:59:59.000Z

388

Bonded Bracket Assmebly for Frameless Solar Panels  

SciTech Connect (OSTI)

In February 2011 the US Department of Energy announced their new Sunshot Initiative. The Sunshot goal is to reduce the total cost of solar energy systems by about 75 percent before the end of the decade. The DOE estimated that a total installed cost of $1 per watt for photovoltaic systems would be equivalent to 6���¢/kilowatt hour (kWh) for energy available from the grid. The DOE also estimated that to meet the $1 per watt goal, PV module costs would need to be reduced to $.50 per watt, balance of systems costs would need to be reduced to $.40 per watt, and power electronic costs would need to reach $.10 per watt. To address the BOS balance of systems cost component of the $1 per watt goal, the DOE announced a funding opportunity called (BOS-X) Extreme Balance of System Hardware Cost Reductions. The DOE identified eight areas within the total BOS costs: 1) installation labor, 2) installation materials, 3) installation overhead and profit, 4) tracker, 5) permitting and commissioning, 6) site preparation, 7) land acquisition, 8) sales tax. The BOS-X funding announcement requested applications in four specific topics: Topic 1: Transformational Building Integrated Photovoltaic (BIPV) Modules Topic 2: Roof and Ground Mount Innovations Topic 3: Transformational Photovoltaic System Designs Topic 4: Development of New Wind Load Codes for PV Systems The application submitted by ARaymond Tinnerman reflected the requirements listed in Topic #2, Roof and Ground Mount Innovations. The goal of topic #2 was to develop technologies that would result in the extreme reduction of material and labor costs associated with applications that require physical connections and attachments to roof and ground mount structures. The topics researched in this project included component cost reduction, labor reduction, weight reduction, wiring innovations, and alternative material utilization. The project objectives included: 1) The development of an innovative quick snap bracket assembly that would be bonded to frameless PV modules for commercial rooftop installations. 2) The development of a composite pultruded rail to replace traditional racking materials. 3) In partnership with a roofing company, pilot the certification of a commercial roof to be solar panel compliant, eliminating the need for structural analysis and government oversight resulting in significantly decreased permitting costs. 4) Reduce the sum of all cost impacts in topic #2 from a baseline total of $2.05/watt to $.34/watt.

Murray, Todd

2013-01-30T23:59:59.000Z

389

Success and failure of firms in the IT outsourcing industry  

E-Print Network [OSTI]

In the year 2004 amidst the hype against outsourcing heard in the wake of elections something important happened: the first few IT outsourcing companies crossed the threshold of billion dollars in revenue (viz. TCS, Infosys, ...

Banerjee, Atish

2005-01-01T23:59:59.000Z

390

EPRI's Industrial Energy Management Program  

E-Print Network [OSTI]

the Electric Power Research Institute has been establishing industry specific Centers and Offices nationwide to assist electric utilities and their customers in managing for a better use of energy. Hundreds of joint industry/utility projects... services thus supporting national objectives for a clean environment and a strong economic future. The Electric Power Research Institute (EPRI) recognizes that the management of energy use and the environmental impacts of industrial activity...

Mergens, E.; Niday, L.

391

Energy Efficiency and Industrial Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Next Generation Nuclear Plant Docs CONTACT US Center for Advanced Energy Studies Energy Efficiency and Industrial Technology The Department conducts research for DOE, other...

392

Industry Supply Chain Development (Ohio)  

Broader source: Energy.gov [DOE]

Supply Chain Development programs are focused on targeted industries that have significant growth opportunities for Ohio's existing manufacturing sector from emerging energy resources and...

393

FAQS Reference Guide – Industrial Hygiene  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the November 2007 edition of DOE-STD-1138-2007, Industrial Hygiene Functional Area Qualification Standard.

394

China's Nuclear Industry After Fukushima  

E-Print Network [OSTI]

s Nuclear Industry After Fukushima Jingdong YUAN SummaryT he March 2011 Fukushima nuclear accident has had aand speedy responses to Fukushima-like and other unexpected

YUAN, Jingdong

2013-01-01T23:59:59.000Z

395

Department of Industrial Engineering Spring 2011 Armstrong World Industries, Inc  

E-Print Network [OSTI]

PENNSTATE Department of Industrial Engineering Spring 2011 Armstrong World Industries, Inc Overview The main objectives were the following: -To reduce wasted space and optimize the Armstrong Marietta plant generate? How did you analyse them? Outcomes Armstrong will save on forklift fuel costs as a result

Demirel, Melik C.

396

Oklahoma Industrial Energy Management Program  

E-Print Network [OSTI]

The need for sound energy management is no longer worthy of debate. Action is necessary and much is being done by U.S. industry. Unfortunately, however, the majority of the work is being done by the few large energy intensive industries throughout...

Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

1979-01-01T23:59:59.000Z

397

College of Engineering Industrial Engineering  

E-Print Network [OSTI]

College of Engineering Industrial Engineering Core 2.0 Completion Checklist Industrial Engineering) 6 Research and Creative Experience R EIND 499R (I&ME 444 R and I&ME 445 R) Note: Courses completed Social Sciences; * EGEN 310 (ENGR 310), Multidisciplinary Engineering Design, may be substituted

Dyer, Bill

398

Creating Value Wood Products Industry  

E-Print Network [OSTI]

Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

399

Forschungsschwerpunkt S92 Industrial Geometry  

E-Print Network [OSTI]

Forschungsschwerpunkt S92 Industrial Geometry http://www.ig.jku.at Computational Geometry Robot Kinematics Computer Aided Geometric Design Image Processing INDUSTRIAL GEOMETRY Classical Geometry Computer unwanted branches of the implicitly defined curves. Moreover, it is required for many applications, e

Jüttler, Bert

400

Energy Savings in Industrial Buildings  

E-Print Network [OSTI]

The industrial sector accounts for more than one-third of total energy use in the United States and emits 28.7 percent of the country’s greenhouse gases. Energy use in the industrial sector is largely for steam and process heating systems...

Zhou, A.; Tutterow, V.; Harris, J.

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

PROPOSED MODIFICATION TO THE ACI 318-02 CODE EQUATION ON BOND STRENGTH FOR MMFX STEEL  

E-Print Network [OSTI]

ST-263-1 PROPOSED MODIFICATION TO THE ACI 318-02 CODE EQUATION ON BOND STRENGTH FOR MMFX STEEL R the bond characteristics of Micro-composite Multi-structural Formable reinforcing steel rebars of the current equation of the ACI 318-02 Code on bond to predict the bond capacity of the MMFX steel rebars

402

Mechanical Study of Copper Bonded at Low Temperature using Spark Plasma Sintering Process  

E-Print Network [OSTI]

is approximatively 6.47 MPa [7]. J. W. Elmer & al [8] have presented a diffusion bonding of high purity copper using a conventional furnace. A series of diffusion bonds was done to determine the relationship between bond strengthMechanical Study of Copper Bonded at Low Temperature using Spark Plasma Sintering Process Bassem

Paris-Sud XI, Université de

403

Highly Efficient Vertical Outgassing Channels for Robust, Void-Free, Low-Temperature Direct Wafer Bonding  

E-Print Network [OSTI]

molecules diffusion at bonding interface to VOCs. Conventional anneal time of 12-18 hours required to bond Bonding Di Liang1 , Erik A. Lucero2 , John E. Bowers1 1 Department of Electrical and Computer Engineering wafer bonding is favored for dissimilar materials integration, particularly in III-V compound

Bowers, John

404

The C OH O hydrogen bond: A determinant of stability and specificity  

E-Print Network [OSTI]

recovered by hydro- gen bond formation, so hydrogen bonds provide a small or even unfavorable net energy hydro- gen bond has been unclear and its interaction energy has been believed to be small. Recently that apparent carbon hydro- gen bonds cluster frequently at glycine-, serine-, and threonine-rich packing

Senes, Alessandro

405

Thermal Performance and Reliability of Bonded Interfaces for Power Electronics Packaging Applications (Presentation)  

SciTech Connect (OSTI)

This presentation discusses the thermal performance and reliability of bonded interfaces for power electronics packaging applications.

Devoto, D.

2013-07-01T23:59:59.000Z

406

A new hydrogen-bonding potential for the design of proteinRNA interactions predicts specific  

E-Print Network [OSTI]

A new hydrogen-bonding potential for the design of protein­RNA interactions predicts specific-dependent hydrogen-bonding potential based on the statistical analysis of hydrogen-bonding geometries of hydrogen-bonding atom pairs at protein­ nucleic acid interfaces. A scoring function based on the hydrogen

Baker, David

407

Hydrogen Bond Migration between Molecular Sites Observed with Ultrafast 2D IR Chemical Exchange Spectroscopy  

E-Print Network [OSTI]

Hydrogen Bond Migration between Molecular Sites Observed with Ultrafast 2D IR Chemical ExchangeVed: January 12, 2010 Hydrogen-bonded complexes between phenol and phenylacetylene are studied using ultrafast hydrogen bonding acceptor sites (phenyl or acetylene) that compete for hydrogen bond donors in solution

Fayer, Michael D.

408

U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008  

SciTech Connect (OSTI)

The U.S. energy service company (ESCO) industry is an example of a private sector business model where energy savings are delivered to customers primarily through the use of performance-based contracts. This study was conceived as a snapshot of the ESCO industry prior to the economic slowdown and the introduction of federal stimulus funding mandated by enactment of the American Recovery and Reinvestment Act of 2009 (ARRA). This study utilizes two parallel analytic approaches to characterize ESCO industry and market trends in the U.S.: (1) a ?top-down? approach involving a survey of individual ESCOs to estimate aggregate industry activity and (2) a ?bottom-up? analysis of a database of ~;;3,250 projects (representing over $8B in project investment) that reports market trends including installed EE retrofit strategies, project installation costs and savings, project payback times, and benefit-cost ratios over time. Despite the onset of a severe economic recession, the U.S. ESCO industry managed to grow at about 7percent per year between 2006 and 2008. ESCO industry revenues were about $4.1 billion in 2008 and ESCOs anticipate accelerated growth through 2011 (25percent per year). We found that 2,484 ESCO projects in our database generated ~;;$4.0 billion ($2009) in net, direct economic benefits to their customers. We estimate that the ESCO project database includes about 20percent of all U.S. ESCO market activity from 1990-2008. Assuming the net benefits per project are comparable for ESCO projects that are not included in the LBNL database, this would suggest that the ESCO industry has generated ~;;$23 billion in net direct economic benefits for customers at projects installed between 1990 and 2008. There is empirical evidence confirming that the industry is evolving by installing more comprehensive and complex measures?including onsite generation and measures to address deferred maintenance?but this evolution has significant implications for customer project economics, especially at K-12 schools. We found that the median simple payback time has increased from 1.9 to 3.2 years in private sector projects since the early-to-mid 1990s and from 5.2 to 10.5 years in public sector projects for the same time period.

Larsen, Peter; Goldman, Charles; Satchwell, Andrew

2012-08-21T23:59:59.000Z

409

Market trends in the U.S. ESCO industry: Results from the NAESCO database project  

SciTech Connect (OSTI)

The U.S. Energy Services Company (ESCO) industry is often cited as the most successful model for the private sector delivery of energy-efficiency services. This study documents actual performance of the ESCO industry in order to provide policymakers and investors with objective information and customers with a resource for benchmarking proposed projects relative to industry performance. We have assembled a database of nearly 1500 case studies of energy-efficiency projects-the most comprehensive data set of the U.S. ESCO industry available. These projects include $2.55B of work completed by 51 ESCOs and span much of the history of this industry. We estimate that the ESCO industry completed $1.8-2.1B of projects in 2000. The industry has grown rapidly over the last decade with revenues increasing at a 24% annualized rate. We summarize and compare project characteristics and costs and analyze energy savings, including the relationship between predicted and actual savings. ESCOs typically invested about $2.30/ft{sup 2} per project in various energy efficiency improvements, although there is large variation in project costs within and across market segments. We find that lighting-only projects report median electricity savings of 47% of targeted equipment consumption; the median for lighting-&-non-lighting projects is 23% of the total electric bill baseline. We examine project economics, including project net benefits, benefit/cost ratio and simple payback time. Median simple payback time is seven years for institutional sector projects and three years in the private sector. We estimate direct economic benefits of $1.62 billion for the 1080 projects in our database with both cost and savings data. The median benefit/cost ratio is 2.1 for 309 private sector projects and 1.6 for 771 institutional sector projects. We discuss the role of policies and programs adopted by state/federal legislatures and agencies that have played an important role in stimulating ESCO activity in various markets. Finally, we estimate the overall size and growth of the energy-efficiency services industry over the last ten years based on a survey of 63 ESCOs.

Goldman, Charles A.; Osborn, Julie G.; Hopper, Nicole C.; Singer, Terry E.

2002-05-01T23:59:59.000Z

410

Effect of quantum nuclear motion on hydrogen bonding  

SciTech Connect (OSTI)

This work considers how the properties of hydrogen bonded complexes, X–H?Y, are modified by the quantum motion of the shared proton. Using a simple two-diabatic state model Hamiltonian, the analysis of the symmetric case, where the donor (X) and acceptor (Y) have the same proton affinity, is carried out. For quantitative comparisons, a parametrization specific to the O–H?O complexes is used. The vibrational energy levels of the one-dimensional ground state adiabatic potential of the model are used to make quantitative comparisons with a vast body of condensed phase data, spanning a donor-acceptor separation (R) range of about 2.4 ? 3.0 Å, i.e., from strong to weak hydrogen bonds. The position of the proton (which determines the X–H bond length) and its longitudinal vibrational frequency, along with the isotope effects in both are described quantitatively. An analysis of the secondary geometric isotope effect, using a simple extension of the two-state model, yields an improved agreement of the predicted variation with R of frequency isotope effects. The role of bending modes is also considered: their quantum effects compete with those of the stretching mode for weak to moderate H-bond strengths. In spite of the economy in the parametrization of the model used, it offers key insights into the defining features of H-bonds, and semi-quantitatively captures several trends.

McKenzie, Ross H., E-mail: r.mckenzie@uq.edu.au; Bekker, Christiaan [School of Mathematics and Physics, University of Queensland, Brisbane 4072 (Australia)] [School of Mathematics and Physics, University of Queensland, Brisbane 4072 (Australia); Athokpam, Bijyalaxmi; Ramesh, Sai G. [Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560 012 (India)] [Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560 012 (India)

2014-05-07T23:59:59.000Z

411

Uranium industry annual 1993  

SciTech Connect (OSTI)

Uranium production in the United States has declined dramatically from a peak of 43.7 million pounds U{sub 3}O{sub 8} (16.8 thousand metric tons uranium (U)) in 1980 to 3.1 million pounds U{sub 3}O{sub 8} (1.2 thousand metric tons U) in 1993. This decline is attributed to the world uranium market experiencing oversupply and intense competition. Large inventories of uranium accumulated when optimistic forecasts for growth in nuclear power generation were not realized. The other factor which is affecting U.S. uranium production is that some other countries, notably Australia and Canada, possess higher quality uranium reserves that can be mined at lower costs than those of the United States. Realizing its competitive advantage, Canada was the world`s largest producer in 1993 with an output of 23.9 million pounds U{sub 3}O{sub 8} (9.2 thousand metric tons U). The U.S. uranium industry, responding to over a decade of declining market prices, has downsized and adopted less costly and more efficient production methods. The main result has been a suspension of production from conventional mines and mills. Since mid-1992, only nonconventional production facilities, chiefly in situ leach (ISL) mining and byproduct recovery, have operated in the United States. In contrast, nonconventional sources provided only 13 percent of the uranium produced in 1980. ISL mining has developed into the most cost efficient and environmentally acceptable method for producing uranium in the United States. The process, also known as solution mining, differs from conventional mining in that solutions are used to recover uranium from the ground without excavating the ore and generating associated solid waste. This article describes the current ISL Yang technology and its regulatory approval process, and provides an analysis of the factors favoring ISL mining over conventional methods in a declining uranium market.

Not Available

1994-09-01T23:59:59.000Z

412

AVLIS industrial access program  

SciTech Connect (OSTI)

This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the project in a competitive procurement situation. As a result, costs and procurement risks are both reduced because the products provided come from within the AVLIS suppliers' experience base. At the same time, suppliers can benefit by the potential to participate in AVLIS technology spin-off markets. 35 figures.

Not Available

1984-11-15T23:59:59.000Z

413

Optical Fiber High Temperature Sensor Instrumentation for Energy Intensive Industries  

SciTech Connect (OSTI)

This report summarizes technical progress during the program “Optical Fiber High Temperature Sensor Instrumentation for Energy Intensive Industries”, performed by the Center for Photonics Technology of the Bradley Department of Electrical and Computer Engineering at Virginia Tech. The objective of this program was to use technology recently invented at Virginia Tech to develop and demonstrate the application of self-calibrating optical fiber temperature and pressure sensors to several key energy-intensive industries where conventional, commercially available sensors exhibit greatly abbreviated lifetimes due primarily to environmental degradation. A number of significant technologies were developed under this program, including • a laser bonded silica high temperature fiber sensor with a high temperature capability up to 700°C and a frequency response up to 150 kHz, • the world’s smallest fiber Fabry-Perot high temperature pressure sensor (125 x 20 ?m) with 700°C capability, • UV-induced intrinsic Fabry-Perot interferometric sensors for distributed measurement, • a single crystal sapphire fiber-based sensor with a temperature capability up to 1600°C. These technologies have been well demonstrated and laboratory tested. Our work plan included conducting major field tests of these technologies at EPRI, Corning, Pratt & Whitney, and Global Energy; field validation of the technology is critical to ensuring its usefulness to U.S. industries. Unfortunately, due to budget cuts, DOE was unable to follow through with its funding commitment to support Energy Efficiency Science Initiative projects and this final phase was eliminated.

Cooper, Kristie L.; Wang, Anbo; Pickrell, Gary R.

2006-11-14T23:59:59.000Z

414

Energy conservation guide for industrial processes  

SciTech Connect (OSTI)

Th Energy Conservation Guide for industrial processes has simple instructions to survey energy use areas at Navy industrial activities like shipyards, Naval air rework facilities and government owned, contractor operated (GOCO) plants. This guide includes information and procedures on: organizing and conducting an industrial energy survey; evaluating purchased energy data; descriptions of industrial systems; and evaluation of industrial processes for conservation.

Not Available

1981-01-01T23:59:59.000Z

415

UNDERGRADUATE DEGREES Industrial and Systems Engineering  

E-Print Network [OSTI]

UNDERGRADUATE DEGREES Industrial and Systems Engineering The Bachelor's Degree in Industrial, consulting at amusement parks, analyzing systems, and beyond. SYSTEMS ScIENcE AND INDUSTRIAl ENGINEERING of Engineering in Industrial Engineering (MEng IE) equips graduates to be effective in industry and provides

Suzuki, Masatsugu

416

The industrial ecology of the iron casting industry  

E-Print Network [OSTI]

Metal casting is an energy and materials intensive manufacturing process, which is an important U.S. industry. This study analyzes iron casting, in particular, for possible improvements that will result in greater efficiencies ...

Jones, Alissa J. (Alissa Jean)

2007-01-01T23:59:59.000Z

417

Metal-bonded, carbon fiber-reinforced composites  

DOE Patents [OSTI]

Metal bonded carbon fiber-reinforced composites are disclosed in which the metal and the composite are strongly bound by (1) providing a matrix-depleted zone in the composite of sufficient depth to provide a binding site for the metal to be bonded and then (2) infiltrating the metal into the matrix-free zone to fill a substantial portion of the zone and also provide a surface layer of metal, thereby forming a strong bond between the composite and the metal. The invention also includes the metal-bound composite itself, as well as the provision of a coating over the metal for high-temperature performance or for joining to other such composites or to other substrates. 2 figs.

Sastri, S.A.; Pemsler, J.P.; Cooke, R.A.; Litchfield, J.K.; Smith, M.B.

1996-03-05T23:59:59.000Z

418

Metal-bonded, carbon fiber-reinforced composites  

DOE Patents [OSTI]

Metal bonded carbon fiber-reinforced composites are disclosed in which the metal and the composite are strongly bound by (1) providing a matrix-depleted zone in the composite of sufficient depth to provide a binding site for the metal to be bonded and then (2) infiltrating the metal into the matrix-free zone to fill a substantial portion of the zone and also provide a surface layer of metal, thereby forming a strong bond between the composite and the metal. The invention also includes the metal-bound composite itself, as well as the provision of a coating over the metal for high-temperature performance or for joining to other such composites or to other substrates.

Sastri, Suri A. (Lexington, MA); Pemsler, J. Paul (Lexington, MA); Cooke, Richard A. (Framingham, MA); Litchfield, John K. (Bedford, MA); Smith, Mark B. (Ipswich, MA)

1996-01-01T23:59:59.000Z

419

Chemical strategies for die/wafer submicron alignment and bonding.  

SciTech Connect (OSTI)

This late-start LDRD explores chemical strategies that will enable sub-micron alignment accuracy of dies and wafers by exploiting the interfacial energies of chemical ligands. We have micropatterned commensurate features, such as 2-d arrays of micron-sized gold lines on the die to be bonded. Each gold line is functionalized with alkanethiol ligands before the die are brought into contact. The ligand interfacial energy is minimized when the lines on the die are brought into registration, due to favorable interactions between the complementary ligand tails. After registration is achieved, standard bonding techniques are used to create precision permanent bonds. We have computed the alignment forces and torque between two surfaces patterned with arrays of lines or square pads to illustrate how best to maximize the tendency to align. We also discuss complex, aperiodic patterns such as rectilinear pad assemblies, concentric circles, and spirals that point the way towards extremely precise alignment.

Martin, James Ellis; Baca, Alicia I.; Chu, Dahwey; Rohwer, Lauren Elizabeth Shea

2010-09-01T23:59:59.000Z

420

Students' Interdisciplinary Reasoning about "High-Energy Bonds" and ATP  

E-Print Network [OSTI]

Students' sometimes contradictory ideas about ATP (adenosine triphosphate) and the nature of chemical bonds have been studied in the biology and chemistry education literatures, but these topics are rarely part of the introductory physics curriculum. We present qualitative data from an introductory physics course for undergraduate biology majors that seeks to build greater interdisciplinary coherence and therefore includes these topics. In these data, students grapple with the apparent contradiction between the energy released when the phosphate bond in ATP is broken and the idea that an energy input is required to break a bond. We see that students' perceptions of how each scientific discipline bounds the system of interest can influence how they justify their reasoning about a topic that crosses disciplines. This has consequences for a vision of interdisciplinary education that respects disciplinary perspectives while bringing them into interaction in ways that demonstrate consistency amongst the perspectiv...

Dreyfus, Benjamin W; Sawtelle, Vashti; Svoboda, Julia; Turpen, Chandra; Redish, Edward F

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Intramolecular Hydrogen Bonding in Disubstituted Ethanes. A Comparison of NH,,,O-and OH,,,O-Hydrogen Bonding through Conformational Analysis of 4-Amino-4-oxobutanoate  

E-Print Network [OSTI]

Intramolecular Hydrogen Bonding in Disubstituted Ethanes. A Comparison of NH,,,O- and OH,,,O- Hydrogen Bonding through Conformational Analysis of 4-Amino-4-oxobutanoate (succinamate) and Monohydrogen 1 of amide NH,,,O- and carboxyl OH,,,O- hydrogen bonds were investigated via conformational analysis

Goddard III, William A.

422

The diffusion bonding of silicon carbide and boron carbide using refractory metals  

SciTech Connect (OSTI)

Joining is an enabling technology for the application of structural ceramics at high temperatures. Metal foil diffusion bonding is a simple process for joining silicon carbide or boron carbide by solid-state, diffusive conversion of the metal foil into carbide and silicide compounds that produce bonding. Metal diffusion bonding trials were performed using thin foils (5 {micro}m to 100 {micro}m) of refractory metals (niobium, titanium, tungsten, and molybdenum) with plates of silicon carbide (both {alpha}-SiC and {beta}-SiC) or boron carbide that were lapped flat prior to bonding. The influence of bonding temperature, bonding pressure, and foil thickness on bond quality was determined from metallographic inspection of the bonds. The microstructure and phases in the joint region of the diffusion bonds were evaluated using SEM, microprobe, and AES analysis. The use of molybdenum foil appeared to result in the highest quality bond of the metal foils evaluated for the diffusion bonding of silicon carbide and boron carbide. Bonding pressure appeared to have little influence on bond quality. The use of a thinner metal foil improved the bond quality. The microstructure of the bond region produced with either the {alpha}-SiC and {beta}-SiC polytypes were similar.

Cockeram, B.V.

1999-10-01T23:59:59.000Z

423

High- and low-temperature bonding techniques for microstructures  

SciTech Connect (OSTI)

The ability to bond together two or more silicon wafers greatly expands the variety and complexity of silicon microstructures that can be designed and fabricated. At LLNL, microstructures have been used for many years as hardware in scientific experiments. The activity has recently been expanded into other areas to include microinstruments for biomedical applications and for chemical analysis. Both high temperature (1100{degrees}C) bonding techniques have been used, depending on the application. This paper discusses these applications with emphasis on the most extensive which is the fabrication of microchannel coolers for diode arrays.

Ciarlo, D.R.

1993-06-22T23:59:59.000Z

424

Do Investors Forecast Fat Firms? Evidence from the Gold Mining Industry  

E-Print Network [OSTI]

cantly increasing in p . g H. Royalty Payments Sometimesdelegate the mining) demand royalties for gold extraction.A linear royalty schedule (whether on units, revenues, or

Borenstein, Severin; Farrell, Joseph

2006-01-01T23:59:59.000Z

425

The February 2015 issue of the Molecular Bond | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

issue, we're collaborating with industry, academia and international organizations to advance this area of science - leveraging our staff's expertise and our advanced...

426

adhesively bonded composite: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

evaluation MIT - DSpace Summary: During the last half century, the use of composite materials and structures has been increasing within many industries: aerospace, automotive,...

428

Hazardous and Industrial Waste (Minnesota)  

Broader source: Energy.gov [DOE]

This section describes standards that must be met by facilities generating and processing hazardous and industrial waste, as well as required permits for the construction and operation of such a...

429

The steam engine and industrialization  

E-Print Network [OSTI]

Simon Schaffer in York Rail Museum talks to the camera about the relationship between the steam engine and industrialization and whatsteam meant; a regular supply of moving power for workshops and factories....

Dugan, David

2004-08-17T23:59:59.000Z

430

China's Nuclear Industry After Fukushima  

E-Print Network [OSTI]

2013-9 January 2013 China’s Nuclear Industry After FukushimaMarch 2011 Fukushima nuclear accident has had a significanton the future of China’s nuclear power. First, it highlights

YUAN, Jingdong

2013-01-01T23:59:59.000Z

431

Uncertainty, investment, and industry evolution  

E-Print Network [OSTI]

We study the effects of aggregate and idiosyncratic uncertainty on the entry of firms, total investment, and prices in a competitive industry with irreversible investment. We first use standard dynamic programming methods ...

Caballero, Ricardo J.

1992-01-01T23:59:59.000Z

432

Big Picture 19912012 other industry  

E-Print Network [OSTI]

% Academic 49% Research 8% Consulting 11% Finance 12% other industry 20% Where are the ORC Ph.D. graduates Semiconductors Lincoln Vale NonAcademic Jobs Small Firms Big Firms ORC Alumni Startups Academic 49% Research 8

433

Electrified Separation Processes in Industry  

E-Print Network [OSTI]

For any separation procedure in the chemical industry, a certain amount of reversible work in the form of free energy is required, as dictated by the second law of thermodynamics. Classical techniques for effecting liquid-phase separations...

Appleby, A. J.

1983-01-01T23:59:59.000Z

434

Integrated Industrial Wood Chip Utilization  

E-Print Network [OSTI]

The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

Owens, E. T.

1984-01-01T23:59:59.000Z

435

Industrial Mathematics and Inverse Problems  

E-Print Network [OSTI]

#12;The Industrial Mathematics Structure in Linz 5 #12;The Blast Furnace Process 6 #12;Aims": Looking for causes of an observed or desired effect! A.Tikhonov ( 1936), geophysical problems. F

Fulmek, Markus

436

Outlook for Industrial Energy Benchmarking  

E-Print Network [OSTI]

The U.S. Environmental Protection Agency is exploring options to sponsor an industrial energy efficiency benchmarking study to identify facility specific, cost-effective best practices and technologies. Such a study could help develop a common...

Hartley, Z.

437

China's Nuclear Industry After Fukushima  

E-Print Network [OSTI]

Brief 2013-9 January 2013 China’s Nuclear Industry Aftera significant impact on the future of China’s nuclear power.the importance of safety as China builds more nuclear power

YUAN, Jingdong

2013-01-01T23:59:59.000Z

438

Industrial Plans for AEO2014  

U.S. Energy Information Administration (EIA) Indexed Site

you for your attention 10 Industrial Team Washington DC, July 30, 2013 Macro Team: Kay Smith (202) 586-1132 | kay.smith@eia.gov Vipin Arora (202) 586-1048 | vipin.arora@eia.gov...

439

Industrial Use of Infrared Inspections  

E-Print Network [OSTI]

Infrared is and has been an established technology in the military and aerospace fields. However, only relatively recently has this technology found a "use" in the industrial sector. Many reasons exist why the technology has not been used...

Duch, A. A.

1979-01-01T23:59:59.000Z

440

Electric Utility Industrial Conservation Programs  

E-Print Network [OSTI]

The Alliance to Save Energy conducted a study, funded by the John A. Hartford Foundation, of industrial and commercial electricity conservation opportunities in the service territory of Arkansas Power and Light Company (AP&L). The study determined...

Norland, D. L.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

CALIFORNIA ENERGY PETROLEUM INDUSTRY INFORMATION  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION PETROLEUM INDUSTRY INFORMATION REPORTING ACT (PIIRA) PROGRAM REPORTING PETROLEUM AND NON-PETROLEUM ................................................... 40 PRODUCT DEFINITIONS Major Petroleum Product Storer and Terminal Weekly Report Major petroleum product storers, terminal

442

Three Essays on Industrial Organization  

E-Print Network [OSTI]

The dissertation discusses issues in the field of industrial organization. When the government provides better infrastructure to competing firms for innovation, private firms' R&D expenditures are affected. When the ...

Lee, Yang Seung

2008-12-18T23:59:59.000Z

443

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING  

E-Print Network [OSTI]

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2010/2011 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH)...................................................................................................1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

Mountziaris, T. J.

444

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING  

E-Print Network [OSTI]

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2009/2010 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING (30 CREDITS)...............1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

Mountziaris, T. J.

445

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING  

E-Print Network [OSTI]

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2013/2014 September..............................3 C. COURSE REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS............................4 E. DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH

Massachusetts at Amherst, University of

446

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING  

E-Print Network [OSTI]

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2011/2012 September).................1 REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH (30).....................................................................................................2 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

Mountziaris, T. J.

447

FINLAND SOURCES 2007 -Forest industry production Authorities  

E-Print Network [OSTI]

FINLAND SOURCES 2007 - Forest industry production Print Home Finland Government Authorities Local administration Federations, organizations Company outlooks Industry » Overview » Forest industry production » Turnover » Profit » Energy Year 2006 » Shipping Business services Infrastructure Economy Education

448

Canada's Voluntary Industrial Energy Conservation Program  

E-Print Network [OSTI]

Industrial Energy Conservation in Canada is organized and promoted through a voluntary program that is administered by industry. Industry is divided into fifteen sectors, each of which is represented by a Voluntary Task Force. Information exchange...

Wolf, C. A., Jr.

1980-01-01T23:59:59.000Z

449

Waste Management Trends in Texas Industrial Plants  

E-Print Network [OSTI]

The Industrial Assessment Center at Texas A&M University has performed several waste and energy minimization surveys in small- and medium- sized industrial manufacturing plants in Texas. During these surveys, Industrial Assessment Center personnel...

Smith, C. S.; Heffington, W. M.

450

Multidisciplinary Graduate Curriculum in Support of the Biobased Products Industry  

SciTech Connect (OSTI)

The project had a dominant education component. The project involved revising curriculum to educate traditional engineering students in the emerging field of industrial biotechnology. New classes were developed and offered. As a result, the curriculum of the Colorado School of Mines was expanded to include new content. Roughly 100 undergraduates and about 10 graduate students each year benefit from this curricular expansion. The research associated with this project consisted of developing new materials and energy sources from renewable resources. Several significant advances were made, most importantly the heat distortion temperature of polylactide (PLA) was increased through the addition of cellulosic nanowhiskers. The resulting ecobionanocomposites have superior properties which enable the use of renewable resource based plastics in a variety of new applications. Significant amounts of petroleum are thereby saved and considerable environmental benefits also result. The original project objectives had to be modified as a result of DOE funding cuts, the Biomass Program did not receive adequate funding to fully fund its selected projects. Nonetheless, effectiveness and economic feasibility of the project proved excellent. The educational activities are continuing in a sustainable fashion, now being supported by tuition revenues and the normal budgeting of the University. PI Dorgan taught one of the newly developed classes will in the Fall 2006, after the close of the DOE grant, and again repeatedly into the future. Now established, the curriculum in biobased products and energy will grow and evolve through regular teaching and revisions. On the research side, the new plastic materials appear economically feasible and a new collaboration between the PI’s group and Sealed Air, a major food-packaging manufacturer, has been established to bring the new green plastics to market. Public benefits of the project are noteworthy in many respects. These include the development of a better educated workforce and citizenry capable of providing technological innovation as a means of growing the economy and providing jobs. In particular, the educational components addressing the production of bioethanol, biodiesel, and bioplastics provide graduates that can assist American industries in including greater renewable content in feedstocks for materials and fuels. Finally, the collaboration fostered by this grant led to the drafting of a new book entitled, Bioengineering for Sustainability: Materials and Fuels for the 21st Century. This text will be widely available to the public interested in learning more about these important areas of technology.

John R. Dorgan

2005-09-30T23:59:59.000Z

451

Multidisciplinary Graduate Curriculum in Support of the Biobased Products Industry  

SciTech Connect (OSTI)

The project had a dominant education component. The project involved revising curriculum to educate traditional engineering students in the emerging field of industrial biotechnology. New classes were developed and offered. As a result, the curriculum of the Colorado School of Mines was expanded to include new content. Roughly 100 undergraduates and about 10 graduate students each year benefit from this curricular expansion. The research associated with this project consisted of developing new materials and energy sources from renewable resources. Several significant advances were made, most importantly the heat distortion temperature of polylactide (PLA) was increased through the addition of cellulosic nanowhiskers. The resulting ecobionanocomposites have superior properties which enable the use of renewable resource based plastics in a variety of new applications. Significant amounts of petroleum are thereby saved and considerable environmental benefits also result. Effectiveness and economic feasibility of the project proved excellent. The educational activities are continuing in a sustainable fashion, now being supported by tuition revenues and the normal budgeting of the University. The PI will be teaching one of the newly developed classes will next Fall (Fall 2006), after the close of the DOE grant, and again repeatedly into the future. Now established, the curriculum in biobased products and energy will grow and evolve through regular teaching and revision. On the research side, the new plastic materials appear economically feasible and a new collaboration between the PI’s group and Sealed Air, a major food-packaging manufacturer, has been established to bring the new green plastics to market. Public benefits of the project are noteworthy in many respects. These include the development of a better educated workforce and citizenry capable of providing technological innovation as a means of growing the economy and providing jobs. In particular, the educational components addressing the production of bioethanol, biodiesel, and bioplastics provide graduates that can assist American industries in including greater renewable content in feedstocks for materials and fuels. Finally, the collaboration fostered by this grant led to the drafting of a new book entitled, Bioengineering for Sustainability: Materials and Fuels for the 21st Century. This text will be widely available to the public interested in learning more about these important areas of technology.

John R. Dorgan

2005-07-31T23:59:59.000Z

452

Resummed thermodynamic perturbation theory for bond cooperativity in associating fluids with small bond angles: Effects of steric hindrance and ring formation  

E-Print Network [OSTI]

In this paper we develop a thermodynamic perturbation theory for two site associating fluids which exhibit bond cooperativity. We include both steric hindrance and ring formation such that the equation of state is bond angle dependent. Here the bond angle is the angle separating the centers of the two association sites. As a test, new Monte Carlo simulations are performed, and the theory is found to accurately predict the internal energy as well as the distribution of associated clusters as a function of bond angle and bond cooperativity.

B. D. Marshall; Amin Haghmoradi; W. G. Chapman

2014-04-03T23:59:59.000Z

453

Carbon-carbon bond cleavage of 1,2-hydroxy ethers b7 vanadium(V) dipicolinate complexes  

SciTech Connect (OSTI)

The development of alternatives to current petroleum-based fuels and chemicals is becoming increasingly important due to concerns over climate change, growing world energy demand, and energy security issues. Using non-food derived biomass to produce renewable feedstocks for chemicals and fuels is a particularly attractive possibility. However, the majority of biomass is in the form of lignocellulose, which is often not fully utilized due to difficulties associated with breaking down both lignin and cellulose. Recently, a number of methods have been reported to transform cellulose directly into more valuable materials such as glucose, sorbitol, 5-(chloromethyl)furfural, and ethylene glycol. Less progress has been made with selective transformations of lignin, which is typically treated in paper and forest industries by kraft pulping (sodium hydroxide/sodium sulfide) or incineration. Our group has begun investigating aerobic oxidative C-C bond cleavage catalyzed by dipicolinate vanadium complexes, with the idea that a selective C-C cleavage reaction of this type could be used to produce valuable chemicals or intermediates from cellulose or lignin. Lignin is a randomized polymer containing methoxylated phenoxy propanol units. A number of different linkages occur naturally; one of the most prevalent is the {beta}-O-4 linkage shown in Figure 1, containing a C-C bond with 1,2-hydroxy ether substituents. While the oxidative C-C bond cleavage of 1,2-diols has been reported for a number of metals, including vanadium, iron, manganese, ruthenium, and polyoxometalate complexes, C-C bond cleavage of 1,2-hydroxy ethers is much less common. We report herein vanadium-mediated cleavage of C-C bonds between alcohol and ether functionalities in several lignin model complexes. In order to explore the scope and potential of vanadium complexes to effect oxidative C-C bond cleavage in 1,2-hydroxy ethers, we examined the reactivity of the lignin model complexes pinacol monomethyl ether (A), 2-phenoxyethanol (B), and 1,2-diphenyl-2-methoxyethanol (C) (Figure 1). Reaction of (dipic)V{sup V}(O)O{sup i}Pr (1a) or (dipic)V{sup v}(O)OEt (lb) with A, B, or C in acetonitrile yielded new vanadium(V) complexes where the alcohol-ether ligand was bound in a chelating fashion. From the reaction of 1b with pinacol monomethyl ether (A) in acetonitrile solution, (dipic)V{sup v}(O)(pinOMe) (2) (PinOMe = 2,3-dimethyl-3-methoxy-2-butanoxide) was isolated in 61 % yield. Reaction of 1b with 2-phenoxyethanol (B) in acetonitrile gave the new complex (dipic)V{sup v}(O)(OPE) (3) (OPE = 2-phenoxyethoxide), which was isolated in 76% yield. In a similar fashion, 1a reacted with 1,2-diphenyl-2-methoxyethanol (C) to give (dipic)V(O)(DPME) (4) (DPME = 1,2-diphenyl-2-methoxyethoxide), which was isolated in 39% yield. Complexes 2, 3, and 4 were characterized by {sup 1}H NMR and IR spectroscopy, elemental analysis, and X-ray crystallography. Compared to the previously reported vanadium(V) pinacolate complex (dipic)V(O)(pinOH) the X-ray structure of complex 2 reveals a slightly shorter V = O bond, 1.573(2) {angstrom} vs 1.588(2) {angstrom} for the pinOH structure. Complexes 3 and 4 display similar vanadium oxo bond distances of 1.568(2) {angstrom} and 1.576(2) {angstrom}, respectively. All three complexes show longer bonds to the ether-oxygen trans to the oxo (2.388(2) {angstrom} for 2, 2.547(2) {angstrom} for 3, and 2.438(2) {angstrom} for 4) than to the hydroxy-oxygen in the pinOH structure (2.252(2) {angstrom}).

Hanson, Susan K [Los Alamos National Laboratory; Gordon, John C [Los Alamos National Laboratory; Thorn, David L [Los Alamos National Laboratory; Scott, Brian L [Los Alamos National Laboratory; Baker, R Tom [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

454

Green Industrial Policy: Trade and Theory  

E-Print Network [OSTI]

Papers Year 2012 Paper 1126 Green Industrial Policy: Trade© 2012 by author(s). Green Industrial Policy: Trade andreality and the potential for green indus- trial policy. We

Karp, Larry; Stevenson, Megan

2012-01-01T23:59:59.000Z

455

EIS-0429: Indiana Gasification, LLC, Industrial Gasification...  

Broader source: Energy.gov (indexed) [DOE]

9: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport, IN and CO2 Pipeline EIS-0429: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport,...

456

EIS-0428: Mississippi Gasification, LLC, Industrial Gasification...  

Broader source: Energy.gov (indexed) [DOE]

8: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS EIS-0428: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS...

457

ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Aluminum Industry Vision: Sustainable Solutions for a Dynamic World ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions for a Dynamic World alumvision.pdf More Documents...

458

Industrial Energy Efficiency Projects Improve Competitiveness...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Industrial Energy Efficiency Projects Improve Competitiveness and Protect Jobs Industrial Energy Efficiency Projects Improve Competitiveness and Protect Jobs U.S. Department of...

459

Rotation With Industry | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Industry Rotation With Industry 7ROTATIONWITHINDUSTRY.pdf More Documents & Publications Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialROTATIONWITHINDUSTRY.doc...

460

Grand Challenge Portfolio: Driving Innovations in Industrial...  

Broader source: Energy.gov (indexed) [DOE]

Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January...

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Borla Performance Industries, Inc. | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Borla Performance Industries, Inc. America's Next Top Energy Innovator Challenge 1830 likes Borla Performance Industries, Inc. Oak Ridge National Laboratory Borla Performance...

462

Industrial Energy Efficiency: Designing Effective State Programs...  

Office of Environmental Management (EM)

State Programs for the Industrial Sector This report provides state regulators, utilities, and other program administrators an overview of the spectrum of U.S. industrial...

463

Geothermal: Sponsored by OSTI -- Industrial Sector Technology...  

Office of Scientific and Technical Information (OSTI)

Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 1. Primary model documentation. Final report...

464

Geothermal Energy Association Annual Industry Briefing: 2015...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Geothermal Energy Association Annual Industry Briefing: 2015 State of Geothermal Geothermal Energy Association Annual Industry Briefing: 2015 State of Geothermal February 24, 2015...

465

Energy Matters: Industrial Energy Efficiency | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Matters: Industrial Energy Efficiency Energy Matters: Industrial Energy Efficiency November 18, 2011 - 2:33pm Addthis On November 16, 2011, Deputy Assistant Secretary for Energy...

466

Colorado State University Industrial Assessment Center Saves...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

audit. | Photo courtesy of University of Missouri IAC. Industrial Assessment Centers Train Future Energy-Savvy Engineers Industrial Assessment Centers Help Students, Communities...

467

Joint Capability Technology Demonstration (JCTD) Industry Day...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Agenda outlines the activities of the 2014...

468

Industrial Energy Efficiency and Climate Change Mitigation  

E-Print Network [OSTI]

mitigate 21 MtCO 2 . Cogeneration (also called Combined Heatefficiencies. Industrial cogeneration is an important partpotential for industrial cogeneration is estimated at almost

Worrell, Ernst

2009-01-01T23:59:59.000Z

469

Method of preparation of bonded polyimide fuel cell package  

DOE Patents [OSTI]

Described herein are processes for fabricating microfluidic fuel cell systems with embedded components in which micron-scale features are formed by bonding layers of DuPont Kapton.TM. polyimide laminate. A microfluidic fuel cell system fabricated using this process is also described.

Morse, Jeffrey D. (Martinez, CA); Jankowski, Alan (Livermore, CA); Graff, Robert T. (Modesto, CA); Bettencourt, Kerry (Dublin, CA)

2011-04-26T23:59:59.000Z

470

Vibrational Signature of Water Molecules in Asymmetric Hydrogen Bonding Environments  

E-Print Network [OSTI]

Vibrational Signature of Water Molecules in Asymmetric Hydrogen Bonding Environments Chao Zhang contributions of each of the two hydrogen atoms to the vibrational modes 1 and 3 of water molecules the early works on the molecular structure of water, it has been accepted that a water molecule

Guidoni, Leonardo

471

Structural and bonding trends in platinum-carbon clusters  

E-Print Network [OSTI]

. Trends in stability, Pt+-Cx binding energy, doublet-quartet excitation energy, and Pt-C bond lengths were investigated. Explanations for these patterns are provided in terms of orbital interactions and changes imposed on the carbon-chain by the metal...

Miller, Thomas F

2013-02-22T23:59:59.000Z

472

Bond Strength of ASTM A 1035 Grade 100 Reinforcing Steel  

E-Print Network [OSTI]

The bond strength of ASTM A 1035 Grade 100 reinforcing steel is evaluated relative to the values predicted using the development expressions in ACI 318-05 and ACI 408R-03. Sixty-nine beam-splice specimens were tested at the University of Kansas...

Briggs, Michael

2008-04-24T23:59:59.000Z

473

A Single Disulfide Bond Differentiates Aggregation Pathways of 2-Microglobulin  

E-Print Network [OSTI]

simulation; aggregation; domain swapping*Corresponding author Introduction Amyloid fibrils are insolubleA Single Disulfide Bond Differentiates Aggregation Pathways of ß2-Microglobulin Yiwen Chen1 at Chapel Hill Chapel Hill, NC 27599, USA Deposition of wild-type ß2-microglobulin (ß2m) into amyloid

Dokholyan, Nikolay V.

474

WHAT'S GRAPHENE? Mono or few layers of sp2 bonded  

E-Print Network [OSTI]

WHAT'S GRAPHENE? · Mono or few layers of sp2 bonded carbon atoms in a honeycomb lattice 105cm2/Vs at RT. 1 Due to its unique transport properties, graphene is suitable for implementation sampling (EOS) timeresolved spectroscopy to optically pump and THz probe exfoliated graphene ribbons (GR

Mellor-Crummey, John

475

Diffusion limited cluster aggregation with irreversible flexible bonds  

E-Print Network [OSTI]

Irreversible diffusion limited cluster aggregation (DLCA) of hard spheres was simulated using Brownian cluster dynamics. Bound spheres were allowed to move freely within a specified range, but no bond breaking was allowed. The structure and size distribution of the clusters was investigated before gelation. The pair correlation function and the static structure factor of the gels were determined as a function of the volume fraction and time. Bond flexibility led to local densification of the clusters and the gels, with a certain degree of order. At low volume fractions densification of the clusters occurred during their growth, but at higher volume fractions it occurred mainly after gelation. At very low volume fractions, the large scale structure (fractal dimension), size distribution and growth kinetics of the clusters was found to be close to that known for DLCA with rigid bonds. Restructuring of the gels continued for long times, indicating that aging processes in systems with strong attraction do not necessarily involve bond breaking. The mean square displacement of particles in the gels was determined. It is shown to be highly heterogeneous and to increase with decreasing volume fraction.

Sujin Babu; Jean-Christophe Gimel; Taco Nicolai

2008-01-29T23:59:59.000Z

476

Advance Refundings of Municipal Bonds Columbia Business School  

E-Print Network [OSTI]

Advance Refundings of Municipal Bonds Andrew Ang Columbia Business School and NBER Richard C. Green of Vineer Bhansali, Trevor Harris, Tal Heppenstall, Andrew Kalotay, Kemp Lewis, Paul Luhmann, Matt of colleagues, especially Jennifer Carpenter, Dan Li, Norman Sch¨urhoff, and Chester Spatt, along with seminar

Sadeh, Norman M.

477

Bonded labour The Dalits of Nepal are a marginalised  

E-Print Network [OSTI]

Bonded labour The Dalits of Nepal are a marginalised group of people who have suffered systematic that, while illegal, is still widespread in remote rural areas of Nepal. To meet their basic needs in their neighbour- hood. Referred to in Nepal as Haliya/ Haruwa and Charuwa, they have to plough the landlords' land

Richner, Heinz

478

Water inertial reorientation: Hydrogen bond strength and the angular potential  

E-Print Network [OSTI]

Water inertial reorientation: Hydrogen bond strength and the angular potential David E. Moilanen) The short-time orientational relaxation of water is studied by ultrafast infrared pump-probe spectroscopy with recent molecular dynamics simulations employing the simple point charge-extended water model at room

Fayer, Michael D.

479

Resummed thermodynamic perturbation theory for bond cooperativity in associating fluids  

E-Print Network [OSTI]

We develop a resummed thermodynamic perturbation theory for bond cooperativity in associating fluids by extension of Wertheim's multi - density formalism. We specifically consider the case of an associating hard sphere with two association sites and both pairwise and triplet contributions to the energy. To test the theory we perform new monte carlo simulations. Theory and simulation are found to be in excellent agreement.

B. D. Marshall; W. G. Chapman

2013-09-18T23:59:59.000Z

480

alteredintramolecular hydrogen-bonding pattern: Topics by E-print...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

alteredintramolecular hydrogen-bonding pattern First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1...

Note: This page contains sample records for the topic "industrial revenue bonds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Hydrogen Bonding Increases Packing Density in the Protein Interior  

E-Print Network [OSTI]

Hydrogen Bonding Increases Packing Density in the Protein Interior David Schell,1,2 Jerry Tsai,1 J System Health Science Center, College Station, Texas 77843-1114 ABSTRACT The contribution of hydrogen to the stability, but experimental studies show that bury- ing polar groups, especially those that are hydrogen

482

Concept generation of dynamic systems using bond graphs  

E-Print Network [OSTI]

REPRESENTATIONS OF IMMITTANCES . . . Immittance synthesis in design Conventional immit tance synthesis techniques by Foster and Cauer Immittance synthesis with bond graphs . . . . . . . . . . . . . Example - Synthesis of two frequency absorber... . . . . . . . . . 35 . 35 . 38 . . . . . . 40 . . . . . . 49 TABLE OF CONTENTS (Continued) CHAPTER Page V PHYSICAL REPRESENTATIONS OF TRANSFER FUNCTIONS Transfer function synthesis in design . . . . . . . . . . . General procedure Conditions for passive...

Krishnan, S

1990-01-01T23:59:59.000Z

483

Comparing systemic risk in European government bonds and national indices  

E-Print Network [OSTI]

It has been shown, that the systemic risk contained in financial markets can be indicated by the change of cross-correlation between different indices and stocks. This change is tracked by using principle component analysis (PCA). We use this technique to investigate the systemic risk contained in European economy by comparing government long term bonds and indices.

Jurczyk, Jan; Morgenstern, Ingo

2015-01-01T23:59:59.000Z

484

Development and validation of bonded composite doubler repairs for commercial aircraft.  

SciTech Connect (OSTI)

A typical aircraft can experience over 2,000 fatigue cycles (cabin pressurizations) and even greater flight hours in a single year. An unavoidable by-product of aircraft use is that crack, impact, and corrosion flaws develop throughout the aircraft's skin and substructure elements. Economic barriers to the purchase of new aircraft have placed even greater demands on efficient and safe repair methods. The use of bonded composite doublers offers the airframe manufacturers and aircraft maintenance facilities a cost effective method to safely extend the lives of their aircraft. Instead of riveting multiple steel or aluminum plates to facilitate an aircraft repair, it is now possible to bond a single Boron-Epoxy composite doubler to the damaged structure. The FAA's Airworthiness Assurance Center at Sandia National Labs (AANC), Boeing, and Federal Express completed a pilot program to validate and introduce composite doubler repair technology to the U.S. commercial aircraft industry. This project focused on repair of DC-10 fuselage structure and its primary goal was to demonstrate routine use of this repair technology using niche applications that streamline the design-to-installation process. As composite doubler repairs gradually appear in the commercial aircraft arena, successful flight operation data is being accumulated. These commercial aircraft repairs are not only demonstrating the engineering and economic advantages of composite doubler technology but they are also establishing the ability of commercial maintenance depots to safely adopt this repair technique. This report presents the array of engineering activities that were completed in order to make this technology available for widespread commercial aircraft use. Focused laboratory testing was conducted to compliment the field data and to address specific issues regarding damage tolerance and flaw growth in composite doubler repairs. Fatigue and strength tests were performed on a simulated wing repair using a substandard design and a flawed installation. In addition, the new Sol-Gel surface preparation technique was evaluated. Fatigue coupon tests produced Sol-Gel results that could be compared with a large performance database from conventional, riveted repairs. It was demonstrated that not only can composite doublers perform well in severe off-design conditions (low doubler stiffness and presence of defects in doubler installation) but that the Sol-Gel surface preparation technique is easier and quicker to carry out while still producing optimum bonding properties. Nondestructive inspection (NDI) methods were developed so that the potential for disbond and delamination growth could be monitored and crack growth mitigation could be quantified. The NDI methods were validated using full-scale test articles and the FedEx aircraft installations. It was demonstrated that specialized NDI techniques can detect flaws in composite doubler installations before they reach critical size. Probability of Detection studies were integrated into the FedEx training in order to quantify the ability of aircraft maintenance depots to properly monitor these repairs. In addition, Boeing Structural Repair and Nondestructive Testing Manuals were modified to include composite doubler repair and inspection procedures. This report presents the results from the FedEx Pilot Program that involved installation and surveillance of numerous repairs on operating aircraft. Results from critical NDI evaluations are reported in light of damage tolerance assessments for bonded composite doublers. This work has produced significant interest from airlines and aircraft manufacturers. The successful Pilot Program produced flight performance history to establish the durability of bonded composite patches as a permanent repair on commercial aircraft structures. This report discusses both the laboratory data and Pilot Program results from repair installations on operating aircraft to introduce composite doubler repairs into mainstream commercial aircraft use.

Roach, Dennis Patrick; Rackow, Kirk A.

2007-07-01T23:59:59.000Z

485

Development of bonded composite doublers for the repair of oil recovery equipment.  

SciTech Connect (OSTI)

An unavoidable by-product of a metallic structure's use is the appearance of crack and corrosion flaws. Economic barriers to the replacement of these structures have created an aging infrastructure and placed even greater demands on efficient and safe repair methods. In the past decade, an advanced composite repair technology has made great strides in commercial aviation use. Extensive testing and analysis, through joint programs between the Sandia Labs FAA Airworthiness Assurance Center and the aviation industry, have proven that composite materials can be used to repair damaged aluminum structure. Successful pilot programs have produced flight performance history to establish the durability of bonded composite patches as a permanent repair on commercial aircraft structures. With this foundation in place, this effort is adapting bonded composite repair technology to civil structures. The use of bonded composite doublers has the potential to correct the difficulties associated with current repair techniques and the ability to be applied where there are no rehabilitation options. It promises to be cost-effective with minimal disruption to the users of the structure. This report concludes a study into the application of composite patches on thick steel structures typically used in mining operations. Extreme fatigue, temperature, erosive, and corrosive environments induce an array of equipment damage. The current weld repair techniques for these structures provide a fatigue life that is inferior to that of the original plate. Subsequent cracking must be revisited on a regular basis. The use of composite doublers, which do not have brittle fracture problems such as those inherent in welds, can help extend the structure's fatigue life and reduce the equipment downtime. Two of the main issues for adapting aircraft composite repairs to civil applications are developing an installation technique for carbon steel and accommodating large repairs on extremely thick structures. This study developed and proved an optimum field installation process using specific mechanical and chemical surface preparation techniques coupled with unique, in-situ heating methods. In addition, a comprehensive performance assessment of composite doubler repairs was completed to establish the viability of this technology for large, steel structures. The factors influencing the durability of composite patches in severe field environments were evaluated along with related laminate design issues.

Roach, David W.; Rackow, Kirk A.

2005-06-01T23:59:59.000Z

486

2013 Total Electric Industry- Sales (Thousand Megawatthours)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import CostsLiquids Reserve3.Revenue (Thousands Dollars)

487

Pollution Prevention and New Industrial Estates  

E-Print Network [OSTI]

1 Pollution Prevention and New Industrial Estates Chris Pittner Associate Director WSP 21 May 2012 POLLUTION PREVENTION AND NEW INDUSTRIAL ESTATES Pollution within Industrial Estates Legal Framework and Guidance Surface Water Management Project Examples #12;2 POLLUTION WITHIN INDUSTRIAL ESTATES Sources Poor

Heal, Kate

488

Mechanical and Industrial Engineering John Stuart  

E-Print Network [OSTI]

Mechanical and Industrial Engineering John Stuart Paul Washburn Co-Chairs MIE IAB Meeting #12;2Mechanical and Industrial Engineering Dean Tim Anderson #12;3Mechanical and Industrial Engineering Strategic vision for growing College Goal Method Current resources #12;4Mechanical and Industrial Engineering

Mountziaris, T. J.

489

Faculty of Engineering Industrial and Manufacturing  

E-Print Network [OSTI]

Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

490

Industrial & Systems Engineering Areas of Engineering Interests  

E-Print Network [OSTI]

Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

Berdichevsky, Victor

491

What does an Industrial Engineer really do???  

E-Print Network [OSTI]

What does an Industrial Engineer really do??? #12;What you will learn · What Industrial Engineering is · Examples of Industrial Engineering (IE) activities · The advantages of an IE college degree #12;Engineering does that engineer do? Where? #12;Industrial Engineers Find a Better Way... · A better way to make

Massachusetts at Amherst, University of

492

Agricultural productivity and industrialization: A reformulation  

E-Print Network [OSTI]

Agricultural productivity and industrialization: A reformulation Debasis Mondal Sept 20, 2014 Abstract In this paper we examine the role of agricultural productivity on the process of industrialization industrialization by releasing labor from agriculture to industry. In fact, when agriculture is highly productive

Bandyopadhyay, Antar

493

The chemical industry, by country  

SciTech Connect (OSTI)

Beijing will be the site for the third ACHEMASIA, international petrochemical and chemical exhibition and conference, May 15--20, 1995. In preparation for this conference, Hydrocarbon Processing contacted executives of petrochemical/chemical industries and trade associations, seeking views on the state of the industry. The Asia-Pacific region is the center of new construction and expanded capacity and also a mixture of mature, developing and emerging petrochemical industries. Established countries must mold and grow with emerging economies as the newcomers access natural resources and develop their own petrochemical infrastructures. The following nation reports focus on product supply/demand trends, economic forecasts, new construction, etc. Space limitations prohibit publishing commentaries from all countries that have petrochemical/chemical capacity. Reports are published from the following countries: Australia, China, Japan, Korea, Malaysia, Philippines, Thailand, and Vietnam.

Not Available

1995-03-01T23:59:59.000Z

494

MIT and Life Sciences & Health Care Industries MIT Industry Brief  

E-Print Network [OSTI]

,Lasers,Spectroscopy · Informatics,Computation,Analysis,Modeling · LifestyleIssues · Medical-forward care; multiple blast and ballistic threats--materials damage, human #12;MIT and Life Sciences & Health Care Industries injury mechanisms, lightweight protective systems; hazardous substances sensing

Polz, Martin

495

MIT and the Building/Construction Industries MIT Industry Brief  

E-Print Network [OSTI]

devoted to improving the ability of companies to efficiently customize products and services in various in these areas. Please note that this is not a comprehensive summary of research being conducted at MIT in the topic areas listed above. MIT's Industrial Liaison Program (ILP) can bring the intellectual power of MIT

Ceder, Gerbrand

496

Industry turns its attention south  

SciTech Connect (OSTI)

The paper discusses the outlook for the gas and oil industries in the Former Soviet Union and Eastern Europe. Significant foreign investment continues to elude Russia`s oil and gas industry, so the Caspian nations of Kazakhstan and Azerbaijan are picking up the slack, welcoming the flow of foreign capital to their energy projects. Separate evaluations are given for Russia, Azerbaijan, Kazakhstan, Turkmenistan, Ukraine, Armenia, Belarus, Georgia, Lithuania, Latvia, Estonia, Moldova, Tajikstan, Uzbekistan, Albania, Bulgaria, Croatia, Czech Republic, Hungary, Poland, Romania, Slovakia, Slovenia, and Serbia.

Marhefka, D. [Russian Petroleum Investor, Moscow (Russian Federation)

1997-08-01T23:59:59.000Z

497

The chemical industry, by country  

SciTech Connect (OSTI)

As part of its ACHEMA coverage, Hydrocarbon Processing contacted executives of petrochemical/chemical industry trade associations in 11 countries, seeking views of on the state of the industry. These reports thus provide an added dimension to feature articles in this issue that focus on petrochemical/chemical-product supply/demand trends, economic forecasts, etc. The nations represented here were chosen for commentary because collectively they contain most of the world's petrochemical capacity. Space limitations prohibit the publishing of commentaries from all countries that have petrochemical/chemical capacity. The countries are: Belgium, China, France, Germany, India, Italy, Japan, Korea, The Netherlands, United Kingdom, and the United States.

Not Available

1994-05-01T23:59:59.000Z

498

NICE3: Industrial Refrigeration System  

SciTech Connect (OSTI)

Energy Concepts has developed an absorption-augmented system as a cost-effective means of achieving more cooling capacity with a substantial reduction in energy consumption and greenhouse gas emissions for industrial refrigeration. It cuts fuel consumption by 30% by combining an internal combustion engine with a mechanical compression refrigeration system and an absorption refrigeration system. The absorption system is powered by engine waste heat. Conventional industrial refrigeration uses mechanical vapor compression, powered by electric motors, which results in higher energy costs. By the year 2010, the new system could cut fuel consumption by 19 trillion Btu and greenhouse emissions by more than 1 million tons per year.

Simon, P.

1999-09-29T23:59:59.000Z

499

E-Print Network 3.0 - amide bond formation Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irvine Collection: Chemistry 3 J. Am. Chem. SOC.1994,116,2149-2150 Amide-Amide and Amide-Water Hydrogen Bonds Summary: of hydrogen bonds observed here therefore suggests that...

500

Facile Thermal W-W Bond Homolysis in the N-Heterocyclic Carbene...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Thermal W-W Bond Homolysis in the N-Heterocyclic Carbene-Containing Tungsten Dimer CpW(CO)2(IMe)2. Facile Thermal W-W Bond Homolysis in the N-Heterocyclic Carbene-Containing...