Powered by Deep Web Technologies
Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Industrial production index forecast: Methods comparison  

Science Conference Proceedings (OSTI)

The purpose of this work is to investigate the suitability of different methods as short term forecast tools. It is studied and compared the application of the Kalman filter method with other forecasting methods when applied to a set of qualitative and quantitative information. The work data set is made of qualitative surveys of conjunture and the industrial production index (IPI). The objective is the attainment of short term forecast models for the Portuguese IPI of the transforming industry. After the previous treatment of the data

M. Filomena Teodoro

2012-01-01T23:59:59.000Z

2

EIA Energy Efficiency-Table 4f. Industrial Production Indexes...  

Annual Energy Outlook 2012 (EIA)

f Page Last Modified: May 2010 Table 4f. Industrial Production Indexes by Selected Industries, 1998, 2002, and 2006 (2000 100) MECS Survey Years NAICS Subsector and Industry 1998...

3

Indexes of Consumption and Production  

U.S. Energy Information Administration (EIA) Indexed Site

Figure on manufacturing production indexes and purchased energy consumption Figure on manufacturing production indexes and purchased energy consumption Source: Energy Information Administration and Federal Reserve Board. History of Shipments This chart presents indices of 14 years (1980-1994) of historical data of manufacturing production indexes and Purchased (Offsite-Produced) Energy consumption, using 1992 as the base year (1992 = 100). Indexing both energy consumption and production best illustrates the trends in output and consumption. Taken separately, these two indices track the relative growth rates within the specified industry. Taken together, they reveal trends in energy efficiency. For example, a steady increase in output, coupled with a decline in energy consumption, represents energy efficiency gains. Likewise, steadily rising energy consumption with a corresponding decline in output illustrates energy efficiency losses.

4

Industrial Oil Products Division  

Science Conference Proceedings (OSTI)

A forum for professionals involved in research, development, engineering, marketing, and testing of industrial products and co-products from fats and oils, including fuels, lubricants, coatings, polymers, paints, inks, cosmetics, dielectric fluids, and ad

5

Industrial Oil Products Newsletter April 2013  

Science Conference Proceedings (OSTI)

Read the Industrial Oil Products Newsletter April 2013. Industrial Oil Products Newsletter April 2013 Industrial Oil Products Newsletter April 2013 ...

6

Evaluating and benchmarking productive performances of six industries in Taiwan Hsin Chu Industrial Science Park  

Science Conference Proceedings (OSTI)

Science Park provides a unique environment for accelerating technological innovation. The purpose of this paper is to analyze efficiency and productivity growth of six industries in Taiwan Hsin Chu Industrial Science Park for the period 2000-2006. From ... Keywords: DEA, Hsin Chu Industrial Science Park, Malmquist Productivity Indexes, Window analysis

Chia Chi Sun

2011-03-01T23:59:59.000Z

7

Productivity index of multilateral wells.  

E-Print Network (OSTI)

??In the history of petroleum science there are a vast variety of productivity solutions for different well types, well configurations and flow regimes. The main… (more)

Nunsavathu, Upender Naik.

2006-01-01T23:59:59.000Z

8

Karlsruhe Institute for Industrial Production | Open Energy Information  

Open Energy Info (EERE)

Karlsruhe Institute for Industrial Production Karlsruhe Institute for Industrial Production Jump to: navigation, search Name Karlsruhe Institute for Industrial Production Place Karlsruhe, Germany Zip 76187 Product String representation "Karlsruhe-based ... tment concepts." is too long. References Karlsruhe Institute for Industrial Production[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Karlsruhe Institute for Industrial Production is a company located in Karlsruhe, Germany . References ↑ "Karlsruhe Institute for Industrial Production" Retrieved from "http://en.openei.org/w/index.php?title=Karlsruhe_Institute_for_Industrial_Production&oldid=347948" Categories: Clean Energy Organizations

9

Institute for Industrial Productivity (IIP) | Open Energy Information  

Open Energy Info (EERE)

Industrial Productivity (IIP) Industrial Productivity (IIP) Jump to: navigation, search Logo: Institute for Industrial Productivity (IIP) Name Institute for Industrial Productivity (IIP) Address 200 Pennsylvania Avenue, N.W. 4th Floor, East Tower Place Washington, DC Zip 20037-1701 Website http://www.iipnetwork.org References www.iipnetwork.org No information has been entered for this organization. Add Organization The Institute for Industrial Productivity provides companies and governments with the best energy efficiency practices to reduce energy costs in industry and prepare for a low carbon future. Our global team and independent experts offer advice on technology, policy and financing of industrial energy efficiency. References Retrieved from "http://en.openei.org/w/index.php?title=Institute_for_Industrial_Productivity_(IIP)&oldid=657859"

10

Industrial Oil Products Division List  

Science Conference Proceedings (OSTI)

Name AffiliationCity, State, CountryIndustrial Oil Products Division2013 Members241 Members as of July 1, 2013Abend, SvenKolb Distribution LtdHedingen, SwitzerlandAbraham, TimothyCargill IncHopkins, MN, USAAkinrinade, FrancisNational Open University, Niger

11

Environmental quality indexing of large industrial development alternatives using AHP  

Science Conference Proceedings (OSTI)

Two industrial development alternatives have been proposed for the East Coast of Iceland in order to strengthen its socio-economic basis. The favoured option is to build a large aluminium smelter, which requires massive hydropower development in the nearby highlands. Another viable option is the construction of a 6-million-ton oil refinery, following the planned exploitation of the Timan Pechora oil reserves in the Russian Arctic. A third 'fictitious' alternative could be general development of existing regional industry and new knowledge-based industries, development of ecotourism, establishment of national parks, accompanied by infrastructure improvement (roads, tunnels, communications, schools, etc.). The three alternatives will have different environmental consequences. The controversial hydropower plant for the smelter requires a large water reservoir as well as considerable land disturbance in this unique mountain territory, considered to be the largest uninhabited wilderness in Western Europe. The aluminium smelter and the oil refinery will give rise to substantial increase of the greenhouse gas (GHG) emissions of the country (about 20%). Then there is potential environmental risk associated with the refinery regarding oil spills at sea, which could have disastrous impact on the fisheries industry. However, the oil refinery does not require any hydropower development, which is a positive factor. Finally, the third alternative could be defined as a ''green'' solution whereby the detrimental environmental consequences of the two industrial solutions are mostly avoided. In order to compare the three alternatives in an orderly manner, the analytic hierarchy process methodology of Saaty was applied to calculate the environmental quality index of each alternative, which is defined as a weighted sum of selected environmental and socio-economic factors. These factors are evaluated on a comparison basis, applying the AHP methodology, and the weights in the quality index summation are estimated in the same manner. Six persons with different backgrounds were asked to fill in the comparison matrices in order to reduce bias in the evaluation. The final results show that the two industrial alternatives come out poorly, i.e. with low quality indices, whereas the third pseudo-alternative, i.e. general development, with a considerably higher quality index, is certainly worth a further study.

Solnes, Julius

2003-05-01T23:59:59.000Z

12

Industrial Ecology and Metal Production - TMS  

Science Conference Proceedings (OSTI)

Jul 2, 2008 ... Topic Title: Powerpoint: Industrial Ecology and Metal Production Topic Summary: Metal extraction is on the the most Earth-intrusive industrial ...

13

Indexed STI Products | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

Electronic STI Products Electronic STI Products Indexed STI Products Print page Print page Email page Email page Benefits of Indexed Metadata and STI Products OSTI indexes metadata and STI products so the information is searchable, allowing users to retrieve relevant results in an effective and efficient manner. Indexing allows STI products to be included in appropriate databases for limited or unlimited access. Indexed information provides a means of locating and retrieving STI products from OSTI databases (e.g.SciTech Connect) and external search engines (e.g. Google, Bing, etc.); Through the use of an alerting system, indexing allows users to identify STI products as they become available; Allows users to determine granularity within data resources; By using authority controls whenever possible, indexing provides

14

Factors that affect the share price index of Taiwan's solar energy industry¡Ðthe crude oil prices and industry scale.  

E-Print Network (OSTI)

??This paper discusses the factors that affect the share price index of Taiwan solar power industry, crude oil prices and the size of the solar… (more)

Deng, Yu-chi

2012-01-01T23:59:59.000Z

15

Industrial service and product providers | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify...

16

Architecting automotive product lines: industrial practice  

Science Conference Proceedings (OSTI)

This paper presents an in-depth view of how architects work with maintaining product line architectures in the automotive industry. The study has been performed at two internationally well-known companies, one car manufacture and one commercial vehicle ... Keywords: architecting, automotive industry, case study, process

Håkan Gustavsson; Ulrik Eklund

2010-09-01T23:59:59.000Z

17

Industrial Oil Products Division Student Award  

Science Conference Proceedings (OSTI)

Awarded to a graduate student for travel to AOCS Annual Meeting & Expo to present a paper. Industrial Oil Products Division Student Award Divisions achievement agricultural analytical application award awards biotechnology detergents distinguished

18

Productivity index and field behavior: a case study  

E-Print Network (OSTI)

This study is an investigation of different factors' phics. influence on the productivity index and its behavior. The objectives of this research are (1) to develop an overview of how different factors influence the productivity index', and (2) to explain the irrational behavior of the productivity index in a case study presented. The problem has its origin in a field in north Africa, where irrational behavior of the productivity index (PI) has made it difficult to forecast the field performance. By irrational behavior we meant that the PI ants the opposite of what is expected. Normally we think PI will increase when the production oil rate of the field increases, at the same pressure drawdown. Or for the same well, PI should be constant over time. In some wells in this particular field we can see the P1 increase as production oil rate decreases and vice versa. Numerical simulation was used to simulate the influence different factors had on the productivity index, and to match wellness PI's with calculated PI's from field data in the case study. An overview of which factors can cause the P1 to go in unexpected directions is presented. Finally the theory obtained about the PI behavior is linked to the case study, and the E6incon-ect'' behavior of the PI is explained. It was shown that transient flow and two-phase flow are the two main reasons for the productivity index to decrease as production oil rate increases. It was also shown that dual porosity, non-Darcy flow, permeability changes, formation compressibility, and skin affect the length of the transient flow period and the magnitude of the difference between transient PI and pseudo steady state (PSS) PI. The behavior of the PI in the field case presented is explained by the transient flow effect and bad test data.

Jensen, Marianne

1998-01-01T23:59:59.000Z

19

TrendSetter Solar Products Inc aka Trendsetter Industries formerly...  

Open Energy Info (EERE)

TrendSetter Solar Products Inc aka Trendsetter Industries formerly Six River Solar Jump to: navigation, search Name TrendSetter Solar Products Inc (aka Trendsetter Industries,...

20

Indexing STI Products | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

Indexing STI Products Indexing STI Products Print page Print page Email page Email page Indexed Data Fields Field Name OSTI Databases SciTech Connect Science Research Connection Authors x x Availability x x Conference Information x x Country x x Description/Abstract x x Descriptors x x DOE Contract Numbers x x Digital Object Identifier (DOI) x x Full-text x x Journal Issue x x Journal Name x x Journal Volume x x Keywords x x Language x x OSTI ID x x Patent Information x x Product Type x x Publisher Information x x Publication Date x x Reference Numbers x x Related Document Information x x Release Other x x Report Numbers x x Research Orgaization x x Subject Category Code Legacy x x Sponsor Organization x x Title x x Last updated: September 26

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Forest Products Industry of the Future  

SciTech Connect

Los Alamos Technical Associates, Inc (LATA) conducted an evaluation of the potential impact and value of a portion of the current portfolio of r&d projects supported by the Office of Industrial Technology and the Forest Products Industry of the Future. The mission of the evaluation was to (a) assess the potential impact of the projects to meet the critical goals of the industry as identified in the vision and roadmapping documents. (b) Evaluate the relationship between the current portfolio of projects and the Agenda 202 Implementation Plan. In addition, evaluate the relationship between the portfolio and the newly revised draft technology strategy being created by the industry. (c) Identify areas where current efforts are making significant progress towards meeting industry goals and identify areas where additional work my be required to meet these goals. (d) Make recommendations to the DOE and the Forest Products Industry on possible improvements in the portfolio and in the current methodology that DOE uses to assess potential impacts on its R&D activities.

Los Alamos Technical Associates, Inc

2002-05-01T23:59:59.000Z

22

Index  

E-Print Network (OSTI)

Monterey Bay Area: Ano Nuevo Long-stemmed and Rossi Square- stemmed Terry Jones and Mark Hylkema INDEX Formation

2002-01-01T23:59:59.000Z

23

India's Fertilizer Industry: Productivity and Energy Efficiency  

Science Conference Proceedings (OSTI)

Historical estimates of productivity growth in India's fertilizer sector vary from indicating an improvement to a decline in the sector's productivity. The variance may be traced to the time period of study, source of data for analysis, and type of indices and econometric specifications used for reporting productivity growth. Our analysis shows that in the twenty year period, 1973 to 1993, productivity in the fertilizer sector increased by 2.3% per annum. An econometric analysis reveals that technical progress in India's fertilizer sector has been biased towards the use of energy, while it has been capital and labor saving. The increase in productivity took place during the era of total control when a retention price system and distribution control was in effect. With liberalization of the fertilizer sector and reduction of subsidies productivity declined substantially since the early 1990s. Industrial policies and fiscal incentives still play a major role in the Indian fertilizer sect or. As substantial energy savings and carbon reduction potential exists, energy policies can help overcome barriers to the adoption of these measures in giving proper incentives and correcting distorted prices.

Schumacher, K.; Sathaye, J.

1999-07-01T23:59:59.000Z

24

Critical Nanotechnology Needs in the Forest Products Industry ...  

Science Conference Proceedings (OSTI)

... in the Forest Products Industry White Paper ... allow substitution of sustainable light weight materials ... wood based composites, paper and paperboard ...

2011-08-02T23:59:59.000Z

25

Productivity benefits of industrial energy efficiency measures  

E-Print Network (OSTI)

of the iron and steel industry in the US. This examinationin the US iron and steel industry. Finally, we discuss thefrom the iron and steel industry. Fig. 1. Conservation

Worrell, Ernst

2011-01-01T23:59:59.000Z

26

Analysing firm performance in Chinese IT industry: DEA Malmquist productivity measure  

Science Conference Proceedings (OSTI)

Chinese IT industry has become more important and maturity after development for tens of years and come up quickly in global IT market. They may have huge influence on Chinese IT market or even the world. This paper is concerned with the study on exploring ... Keywords: China, DEA, IT industry, Malmquist productivity index, data envelopment analysis, efficiency, efficiency convergence, firm performance, information technology, performance measurement, technical diffusion

Xiaohong Chen; Xiaoding Wang; Desheng Dash Wu; Zejing Zhang

2011-12-01T23:59:59.000Z

27

Chemical production from industrial by-product gases: Final report  

DOE Green Energy (OSTI)

The potential for conservation of natural gas is studied and the technical and economic feasibility and the implementation of ventures to produce such chemicals using carbon monoxide and hydrogen from byproduct gases are determined. A survey was performed of potential chemical products and byproduct gas sources. Byproduct gases from the elemental phosphorus and the iron and steel industries were selected for detailed study. Gas sampling, preliminary design, market surveys, and economic analyses were performed for specific sources in the selected industries. The study showed that production of methanol or ammonia from byproduct gas at the sites studied in the elemental phosphorus and the iron and steel industries is technically feasible but not economically viable under current conditions. Several other applications are identified as having the potential for better economics. The survey performed identified a need for an improved method of recovering carbon monoxide from dilute gases. A modest experimental program was directed toward the development of a permselective membrane to fulfill that need. A practical membrane was not developed but further investigation along the same lines is recommended. (MCW)

Lyke, S.E.; Moore, R.H.

1981-04-01T23:59:59.000Z

28

Industry requested exploration/production environmental regulation  

Science Conference Proceedings (OSTI)

California State Review by the Interstate Oil and Gas Compact Commission recommends state and regional water boards issue requirements to all pits subject to basin plans and chapter 15. Resources shortfalls have kept production pits from being Water Board priorities. Threat of United States EPA designation of crude oil as hazardous waste and subsequent land use conflicts of buried pits in developing areas have led to the call for full implementation of State regulations. Recommended state improvements include (1) interagency communication, cross training, computer database, and inspections; (2) development of guidance documents and consistency in pit closure policy, permitting, water quality in DOG pit rules, land spreading, road spreading, and minimum construction and operation requirements and; (3) administratively finding additional resources to fully implement requirements, increase records retention time, consider compliance history, revise Water Board/DOG Memorandum of Understanding and adjust DOG financial assurance program to provide incentive for proper and timely well plugging and site reclamation. Industry/Regulatory Agency cooperation can significantly reduce the burden of regulation implementation, Industry willingness to pay appropriate regulatory fees can facilitate regulation execution. Field drilling crew education can minimize regulatory implementation costs. Mud pit Resource Conservation and Recovery Act exemption can be maintained if hazardous substances (e.g., pipe dope and solvents) are kept out of the pit.

Blanck, L. (California Regional Water Quality Control Board, San Luis Obispo, CA (United States))

1994-04-01T23:59:59.000Z

29

Supply chain network optimization : low volume industrial chemical product  

E-Print Network (OSTI)

The chemical industry is a highly competitive and low margin industry. Chemical transportation faces stringent safety regulations meaning that Cost-To-Serve (C2S), costs associated with products net flow from manufacturers ...

Dacha, Fred (Frederick Omondi)

2013-01-01T23:59:59.000Z

30

Deployment of an AEC industry sector product model  

Science Conference Proceedings (OSTI)

CIMsteel Integration Standard, Version 2 (CIS/2) is an industry-developed product model based on ISO-STEP technology that has been widely adopted within the steel construction industry. CIS/2 is an early success story of broad use of a product model ... Keywords: Building model, Product model, STEP

C. Eastman; F. Wang; S. -J. You; D. Yang

2005-10-01T23:59:59.000Z

31

Determining Levels of Productivity and Efficiency in the Electricity Industry  

Science Conference Proceedings (OSTI)

A few major themes run fairly consistently through the history of productivity and efficiency analysis of the electricity industry: environmental controls, economies of scale, and private versus government.

Abbott, Malcolm

2005-11-01T23:59:59.000Z

32

Productivity benefits of industrial energy efficiency measures  

E-Print Network (OSTI)

of costs and benefits of industrial energy efficiencyof the annual costs of an energy efficiency measure, therebyof cost- effectiveness of energy- efficiency improvement

Worrell, Ernst

2011-01-01T23:59:59.000Z

33

Productivity benefits of industrial energy efficiency measures  

E-Print Network (OSTI)

energy savings are related to energy price changes through1997 dollars. All energy prices and savings were evaluatedthe relationship of energy prices to industry-wide energy

Worrell, Ernst

2011-01-01T23:59:59.000Z

34

Forest products industry of the future: Building a sustainable technology advantage for America`s forest products industry  

Science Conference Proceedings (OSTI)

The US forest, wood, and paper industry ranks as one of the most competitive forest products industries in the world. With annual shipments valued at nearly $267 billion, it employs over 1.3 million people and is currently among the top 10 manufacturing employers in 46 out of 50 states. Retaining this leadership position will depend largely on the industry`s success in developing and using advanced technologies. These technologies will enable manufacturing plants and forestry enterprises to maximize energy and materials efficiency and reduce waste and emissions, while producing high-quality, competitively priced wood and paper products. In a unique partnership, leaders in the forest products industry have teamed with the US Department of Energy`s Office of Industrial Technologies (OIT) to encourage cooperative research efforts that will help position the US forest products industry for continuing prosperity while advancing national energy efficiency and environmental goals.

NONE

1999-02-01T23:59:59.000Z

35

Bailey's Industrial Oil and Fat Products, Volume 2  

Science Conference Proceedings (OSTI)

Edible Oils Bailey's Industrial Oil and Fat Products, Volume 2 Processing Hardback Books Processing John Wiley & Sons, Inc. Edible Oil and Fat Products: Edible Oils 978-0-471-38551-6 Fereidoon Shahidi John Wiley & Sons, Inc.

36

Biocatalysis and Biotechnology for Functional Foods and Industrial Products  

Science Conference Proceedings (OSTI)

Divided into two sections, this book covers the latest applications for enzyme catalysis, biotransformation, bioconversion, fermentation, genetic engineering, and product recove Biocatalysis and Biotechnology for Functional Foods and Industrial Products H

37

Global product development in semiconductor industry : Intel -- Tick-Tock product development cadence  

E-Print Network (OSTI)

This thesis investigates on changes in semiconductor industry's product development methodology by following Intel's product development from year 2000. Intel was challenged by customer's preference change, competitors new ...

Park, Cheolmin, S.M. Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

38

Data mining to improve industrial standards and enhance production and marketing: An empirical study in apparel industry  

Science Conference Proceedings (OSTI)

Apparel production is a high value-added industry in the global textile manufacturing chain. Standard size charts are crucial industrial standards for high-tech apparel industries to maintain competitive advantages in knowledge economy era. However, ... Keywords: Apparel industry, Cluster analysis, Data mining, Industrial standards, Production management and marketing

Chih-Hung Hsu

2009-04-01T23:59:59.000Z

39

Productivity benefits of industrial energy efficiency measures  

E-Print Network (OSTI)

the linkage between energy efficiency and productivity.and increased energy efficiency in integrated paper andand Office of Energy Efficiency and Renewable Energy, 1997.

Worrell, Ernst

2011-01-01T23:59:59.000Z

40

Industrial service and product provider directory | ENERGY STAR...  

NLE Websites -- All DOE Office Websites (Extended Search)

develops teaming profiles to showcase the value Partners find by working with ENERGY STAR industrial Service and Product Providers (iSPPs). These profiles are co-authored by the...

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Energy productivity in the industrial sector: an econometric analysis  

SciTech Connect

Energy productivity and energy intensity within the industrial sector of the economy are examined. Results suggest that relative prices and other economic factors can explain much of the variation in both energy productivity and energy intensity for manufacturing and mining and for the industrial sector as a whole. Cyclical factors, seasonal factors and trend variables are also useful in explaining variation in these data, both for annual and monthly time series. Of the variables examined, it appears that the relative price of energy is a highly significant factor in accounting for the difference between actual industrial energy intensity and that which might have been expected had pre-1973 trends continued.

Roop, J.M.

1983-01-01T23:59:59.000Z

42

Industrial and Agricultural Production Efficiency Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial and Agricultural Production Efficiency Program Industrial and Agricultural Production Efficiency Program Industrial and Agricultural Production Efficiency Program < Back Eligibility Agricultural Industrial Savings Category Other Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Manufacturing Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Design & Remodeling Water Heating Maximum Rebate Custom capital projects: $0.25/kWh, up to 50% of cost; $2/Therm, up to 50% of project cost Custom operation and maintenance projects: $0.08/kWh or $0.40/Therm, up to 50% of project cost Lighting projects: custom lighting incentives get 35% of project cost; prescriptive incentives also available. Total incentive capped at

43

Wisconsin’s Forest Products Industry Business Climate Status Report  

E-Print Network (OSTI)

Wisconsin’s Center for Technology Transfer (CTT) is a non-profit, non-stock corporation with a mission of accelerating investments in energy efficient, environmentally friendly technologies into Wisconsin industry clusters. CTT was awarded its mission in February of 2002 by the Focus on Energy program, which identified the energy intensive, economically important industry clusters whose needs for advanced technology transfer could be served by the CTT. These clusters are Forest Products, Metal Casting, Food Processing, Printing, Glass, Biobased Products & Energy, Water & Wastewater, and Utilities. Technology roadmaps had been developed for each industry cluster through U.S. Department of Energy grants and by Focus on Energy. However, a more in-depth understanding of critical issues facing industry clusters was still needed. CTT, in a joint effort with the U.S. Forest Products Laboratory (FPL) in Madison, initiated issue scoping sessions for the Forest Products cluster. One-on-one meetings with senior executives of Wisconsin forest products companies were conducted to assess the current state and future potentials of the industry group. The findings of these sessions document a litany of challenges facing the industry and are summarized at the end of this report. Many of these challenges and the potential for investments in new technologies were

unknown authors

2004-01-01T23:59:59.000Z

44

Production design for plate products in the steel industry  

E-Print Network (OSTI)

The problem we solve yields a production design (or plan) for rectangular plate ...... (the CD width exploration phase), and then later with the slabs restricted to ...

45

Production design for plate products in the steel industry  

E-Print Network (OSTI)

Apr 5, 2007 ... Abstract: We describe an optimization tool for a multistage production process for rectangular steel plates. The problem we solve yields a ...

46

Economical Recovery of By-products in the Mining Industry  

DOE Green Energy (OSTI)

The U.S. Department of Energy (DOE) Office of Industrial Technologies, Mining Industry of the Future Program, works with the mining industry to further the industry's advances toward environmental and economic goals. Two of these goals are (1) responsible emission and by-product management and (2) low-cost and efficient production (DOE 1998). DOE formed an alliance with the National Mining Association (NMA) to strengthen the basis for research projects conducted to benefit the mining industry. NMA and industry representatives actively participate in this alliance by evaluating project proposals and by recommending research project selection to DOE. Similarly, the National Research Council (NRC) has recently and independently recommended research and technology development opportunities in the mining industry (NRC 2001). The Oak Ridge National Laboratory (ORNL) and Colorado School of Mines engineers conducted one such project for DOE regarding by -product recovery from mining process residue. The results of this project include this report on mining industry process residue and waste with opportunity for by-product recovery. The U.S. mineral processing industry produces over 30,000,000 metric tons per year of process residue and waste that may contain hazardous species as well as valuable by-products. This study evaluates the copper, lead, and zinc commodity sectors which generate between 23,300,000 and 24,000,000 metric tons per year. The distribution of residual elements in process residues and wastes varies over wide ranges* because of variations in the original ore content as it is extracted from the earth's crust. In the earth's crust, the elements of interest to mining fall into two general geochemical classifications, lithophiles and chalcophiles** (Cox 1997). Groups of elements are almost always present together in a given geochemical classification, but the relative amounts of each element are unique to a particular ore body. This paper generally describes copper, lead, and zinc mining operations and their associated process wastes and residues. This description can serve as a basis for identifying those process residues and waste that contain both impurities and products which currently cannot be economically recovered. This information could be used to develop a market-based approach to by-product recovery by evaluating potential revenue generated from the sale of by-products along with innovative recovery techniques.

Berry, J.B.

2001-12-05T23:59:59.000Z

47

PROJECT RULISON A GOVERNMENT- INDUSTRY NATURAL GAS PRODUCT1 O  

Office of Legacy Management (LM)

A GOVERNMENT- INDUSTRY NATURAL GAS PRODUCT1 O A GOVERNMENT- INDUSTRY NATURAL GAS PRODUCT1 O N S T I M U L A T I O N EXPERIMENT U S I N G A NUCLEAR EXPLOSIVE Issued By PROJECT RULISON JOINT OFFICE OF INFORMATION U. S. ATOMIC ENERGY COMMISSION - AUSTRAL OIL COMPANY, INCORPORATED THE DEPARTMENT OF THE INTERIOR - CER GEONUCLEAR CORPORATION May 1, 1969 OBSERVATION AREA J SURFACE GROUND ZERO AREA S C A L E - I inch e q u a l s approximatly I 2 m i l e s Project Rulison Area Map PROJECT RULISON A N INDUSTRY-GOVERNMENT NATURAL GAS PRODUCT1 ON STIMULATION EXPERIMENT USING A NUCLEAR EXPLOSIVE I. INTRODUCTION Project Rulison is o joint experiment sponsored by Austral O i l Company, Incorporated, of Houston, Texas, the U. S. Atomic Energy Commission and the Department o f the Interior, w i t h the Program Management provided b y CER Geonuclear Corporotion of L

48

Abstract Deployment of an AEC industry sector product model  

E-Print Network (OSTI)

widely adopted within the steel construction industry. CIS/2 is an early success story of broad use of a product model for both data exchange and improving the productivity of those companies taking advantage of its capabilities. Here, we review the history of CIS/2, the methods and issues arising from its deployment, the benefits it has thus far realized and the research issues these activities have identified.

C. Eastman; F. Wang; S. -j. You; D. Yang

2004-01-01T23:59:59.000Z

49

Agricultural productivity potential assessment by using rainfall contribution index in Sub-Sahara Africa  

Science Conference Proceedings (OSTI)

Food deficit alleviation is the most important aspect for poverty reduction in the entire Sub-Sahara African (SSA) region. This alleviation can be achieved by increasing agricultural productivity. The deficit is in one way or the other attributed to ... Keywords: agricultural water, effective rainfall, food deficit, planting period, productivity, rainfall contribution index

Yu-Min Wang; Seydou Traore; Willy Namaona; Tienfuan Kerh

2009-05-01T23:59:59.000Z

50

Mineral Sequestration Utilizing Industrial By-Products, Residues, and Minerals  

NLE Websites -- All DOE Office Websites (Extended Search)

J. Fauth and Yee Soong J. Fauth and Yee Soong U.S. Department of Energy National Energy Technology Laboratory Pittsburgh PA, 15236-0940 Mineral Sequestration Workshop National Energy Technology Laboratory August 8, 2001 Mineral Sequestration Utilizing Industrial By-Products, Residues, and Minerals Mineral Sequestration Workshop, U.S. Department of Energy, NETL, August 8, 2001 Overview * Introduction - Objective - Goals - NETL Facilities * Effect of Solution Chemistry on Carbonation Efficiency - Buffered Solution + NaCl - Buffered Solution + MEA * Effect of Pretreatment on Carbonation Efficiency - Thermal Treatments - Chemical Treatments * Carbonation Reaction with Ultramafic Minerals - Serpentine - Olivine Mineral Sequestration Workshop, U.S. Department of Energy, NETL, August 8, 2001 Overview * Carbonation Reaction with Industrial By-products

51

New techniques and products solve industry problems. [New technology available for the natural gas pipeline industry  

SciTech Connect

Recently introduced technology advances in data handling, manipulation and delivery; new gas and storage marketing products; a nonintrusive pipe-crack arrester; and responsive pipe-coating mill construction show promise for cutting industry costs by increasing efficiency in pipe line construction, repair, rehabilitation, and operations. The products, services and methods described in this new technology survey include: a PC-compatible dataserver that requires no user programming; flexible, responsive gas transportation scheme; evaluation of possible further uses on brittle transmission lines for fiberglass-reinforced resin composite; new multilayer epoxy PE coating mill in Corinth, Greece, near areas where large pipe line construction and rehabilitation projects are contemplated.

Bullion, L.

1993-09-01T23:59:59.000Z

52

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

An Exploration of Innovation and An Exploration of Innovation and Energy Efficiency in an Appliance Industry Prepared by Margaret Taylor, K. Sydny Fujita, Larry Dale, and James McMahon For the European Council for an Energy Efficient Economy March 29, 2012 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY LBNL - 5689E An Exploration of Innovation and Energy Efficiency in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and direction of technological change of product industries; the factors that underlie the outcomes of innovation in these industries; and the ways the innovation system might respond to any given intervention. The report provides an overview of the dynamics of energy efficiency policy and innovation in the appliance

53

Industry  

E-Print Network (OSTI)

from refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processes

Bernstein, Lenny

2008-01-01T23:59:59.000Z

54

Industry  

Science Conference Proceedings (OSTI)

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01T23:59:59.000Z

55

Reliability measures for indexed semi-Markov chains applied to wind energy production  

E-Print Network (OSTI)

The computation of the dependability measures is a crucial point in the planning and development of a wind farm. In this paper we address the issue of energy production by wind turbine by using an indexed semi-Markov chain as a model of wind speed. We present the mathematical model, we describe the data and technical characteristics of a commercial wind turbine (Aircon HAWT-10kW). We show how to compute some of the main dependability measures such as reliability, availability and maintainability functions. We compare the results of the model with real energy production obtained from data available in the Lastem station (Italy) and sampled every 10 minutes.

D'Amico, Guglielmo; Prattico, Flavio

2013-01-01T23:59:59.000Z

56

Energy production from food industry wastewaters using bioelectrochemical cells  

Science Conference Proceedings (OSTI)

Conversion of waste and renewable resources to energy using microbial fuel cells (MFCs) is an upcoming technology for enabling a cleaner and sustainable environment. This paper assesses the energy production potential from the US food industry wastewater resource. It also reports on an experimental study investigating conversion of wastewater from a local milk dairy plant to electricity. An MFC anode biocatalyst enriched on model sugar and organic acid substrates was used as the inoculum for the dairy wastewater MFC. The tests were conducted using a two-chamber MFC with a porous three dimensional anode and a Pt/C air-cathode. Power densities up to 690 mW/m2 (54 W/m3) were obtained. Analysis of the food industry wastewater resource indicated that MFCs can potentially recover 2 to 260 kWh/ton of food processed from wastewaters generated during food processing, depending on the biological oxygen demand and volume of water used in the process. A total of 1960 MW of power can potentially be produced from US milk industry wastewaters alone. Hydrogen is an alternate form of energy that can be produced using bioelectrochemical cells. Approximately 2 to 270 m3 of hydrogen can be generated per ton of the food processed. Application of MFCs for treatment of food processing wastewaters requires further investigations into electrode design, materials, liquid flow management, proton transfer, organic loading and scale-up to enable high power densities at the larger scale. Potential for water recycle also exists, but requires careful consideration of the microbiological safety and regulatory aspects and the economic feasibility of the process.

Hamilton, Choo Yieng [ORNL

2009-01-01T23:59:59.000Z

57

Production of Biogas from Wastewaters of Food Processing Industries  

E-Print Network (OSTI)

An Upflow Anaerobic Sludge Blanket Process used in converting biodegradable, soluble, organic pollutants in industrial wastewaters to a directly-burnable biogas composed mainly of methane has been developed, tested, and commercially applied in Holland. Operations on wastewater from the processing of sugar beets have shown hydraulic retention times of less than 10 hours with reactor loadings of at least 10 Kg COD per m3 digester volume per day and purification efficiencies exceeding 90%. Biogas production is at a rate of about 1 therm (100000 BTU) per 10 Kg COD treated. A moderately sized (1000 m3) wastewater treatment plant processing the order of 10000 Kg COD per day will, therefore, produce the order of 1000 therms of energy per day while, at the same time, reducing the COD level in the effluent by an order of magnitude. The set of conditions required for efficient operation of this anaerobic process will be discussed. The process is unique in its mixed sludge bed approach allowing for tolerance of swings in Ph (6-8) at relatively low temperatures (32 C - 38 C) which can be readily achieved from most wastewater streams with little expenditure of additional energy. Sludge production is remarkably low, only about 5% of the COD loading, greatly alleviating disposal problems. These characteristics are conducive for the use of the anaerobic process to recover energy from a variety of wastewaters rich in carbohydrate-type substances as produced routinely as a by product of many types of food processing activities.

Sax, R. I.; Holtz, M.; Pette, K. C.

1980-01-01T23:59:59.000Z

58

Industry  

E-Print Network (OSTI)

oxide emission reductions in industry in the EU. Europeanissues: Annual survey of industries. Central StatisticalDesiccated coconut industry of Sri- Lanka’s opportunities

Bernstein, Lenny

2008-01-01T23:59:59.000Z

59

Sustainability in the product cycle : adopting a shared standard for the apparel industry  

E-Print Network (OSTI)

Decisions made by product designers strongly influence the social and environmental impacts that a consumer product will have over its lifetime. This study examines the Sustainable Apparel Index, a decision-support tool ...

Hartley, Alice C. (Alice Catherine)

2012-01-01T23:59:59.000Z

60

Managing novelty at the interfaces between concept and product : case studies for the automotive industry  

E-Print Network (OSTI)

Appearance of the product is a discerning factor for the consumers purchase decisions. Time from concept to product creation is a critical factor in the competitive automotive industry. The period to develop a product is ...

Zarewych, Lara Daniv, 1972-

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Selling green power in California: Product, industry, and market trends  

SciTech Connect

As one of the first US stages to open its doors to retail electric competition, California offers an important opportunity to assess the effectiveness of green power marketing as a mechanism for supporting renewable energy. This report is an interim assessment of key green power product, industry, and market trends in California. The report identifies and analyzes: the potential size of the green power market in California; the companies participating in the green power market; the green power products being offered and their prices; the impact of the green market on renewable generators and the environment; and the influence of several public policies and non-governmental programs on the market for green power. Data used in this paper have been collected, in large part, from surveys and interviews with green power marketers that took place between December 1997 and April 1998. There remain legitimate concerns over the viability of green power marketing to support significant quantities of renewable energy and provide large environmental gains, and it is far too early to assess the overall strength of customer demand for renewable energy. A critical finding of this report is that, because of the high cost of acquiring and servicing residential customers and the low utility default service price, green power marketing affords new energy service providers one of the only viable entrees to California`s residential marketplace.

Wiser, R.H.; Pickle, S.J.

1998-05-01T23:59:59.000Z

62

Canola: Chemistry, Production, Processing and UtilizationChapter 11 Industry Trade and Economics  

Science Conference Proceedings (OSTI)

Canola: Chemistry, Production, Processing and Utilization Chapter 11 Industry Trade and Economics Processing eChapters Processing Downloadable pdf of Chapter 11 Industry Trade and Economics, from the book ...

63

Technology strategy of competing with industrial design in markets of high-tech consumer products  

E-Print Network (OSTI)

This thesis explores the role of industrial design in the formulation of technology strategy for certain firms that compete in markets of high-tech consumer products. The initial intuition is that the role of industrial ...

Mak, Arthur T

2009-01-01T23:59:59.000Z

64

Aggregate Production Planning for Process Industries under Competition  

E-Print Network (OSTI)

producers’ unit production costs) and market parameters (We are given: v ij : production cost per unit of product jincreases, and when production costs, capacity requirements

Karmarkar, U. S.; Rajaram, K.

2008-01-01T23:59:59.000Z

65

Multidisciplinary Graduate Curriculum in Support of the Biobased Products Industry  

Science Conference Proceedings (OSTI)

The project had a dominant education component. The project involved revising curriculum to educate traditional engineering students in the emerging field of industrial biotechnology. New classes were developed and offered. As a result, the curriculum of the Colorado School of Mines was expanded to include new content. Roughly 100 undergraduates and about 10 graduate students each year benefit from this curricular expansion. The research associated with this project consisted of developing new materials and energy sources from renewable resources. Several significant advances were made, most importantly the heat distortion temperature of polylactide (PLA) was increased through the addition of cellulosic nanowhiskers. The resulting ecobionanocomposites have superior properties which enable the use of renewable resource based plastics in a variety of new applications. Significant amounts of petroleum are thereby saved and considerable environmental benefits also result. Effectiveness and economic feasibility of the project proved excellent. The educational activities are continuing in a sustainable fashion, now being supported by tuition revenues and the normal budgeting of the University. The PI will be teaching one of the newly developed classes will next Fall (Fall 2006), after the close of the DOE grant, and again repeatedly into the future. Now established, the curriculum in biobased products and energy will grow and evolve through regular teaching and revision. On the research side, the new plastic materials appear economically feasible and a new collaboration between the PI’s group and Sealed Air, a major food-packaging manufacturer, has been established to bring the new green plastics to market. Public benefits of the project are noteworthy in many respects. These include the development of a better educated workforce and citizenry capable of providing technological innovation as a means of growing the economy and providing jobs. In particular, the educational components addressing the production of bioethanol, biodiesel, and bioplastics provide graduates that can assist American industries in including greater renewable content in feedstocks for materials and fuels. Finally, the collaboration fostered by this grant led to the drafting of a new book entitled, Bioengineering for Sustainability: Materials and Fuels for the 21st Century. This text will be widely available to the public interested in learning more about these important areas of technology.

John R. Dorgan

2005-07-31T23:59:59.000Z

66

Multidisciplinary Graduate Curriculum in Support of the Biobased Products Industry  

Science Conference Proceedings (OSTI)

The project had a dominant education component. The project involved revising curriculum to educate traditional engineering students in the emerging field of industrial biotechnology. New classes were developed and offered. As a result, the curriculum of the Colorado School of Mines was expanded to include new content. Roughly 100 undergraduates and about 10 graduate students each year benefit from this curricular expansion. The research associated with this project consisted of developing new materials and energy sources from renewable resources. Several significant advances were made, most importantly the heat distortion temperature of polylactide (PLA) was increased through the addition of cellulosic nanowhiskers. The resulting ecobionanocomposites have superior properties which enable the use of renewable resource based plastics in a variety of new applications. Significant amounts of petroleum are thereby saved and considerable environmental benefits also result. The original project objectives had to be modified as a result of DOE funding cuts, the Biomass Program did not receive adequate funding to fully fund its selected projects. Nonetheless, effectiveness and economic feasibility of the project proved excellent. The educational activities are continuing in a sustainable fashion, now being supported by tuition revenues and the normal budgeting of the University. PI Dorgan taught one of the newly developed classes will in the Fall 2006, after the close of the DOE grant, and again repeatedly into the future. Now established, the curriculum in biobased products and energy will grow and evolve through regular teaching and revisions. On the research side, the new plastic materials appear economically feasible and a new collaboration between the PI’s group and Sealed Air, a major food-packaging manufacturer, has been established to bring the new green plastics to market. Public benefits of the project are noteworthy in many respects. These include the development of a better educated workforce and citizenry capable of providing technological innovation as a means of growing the economy and providing jobs. In particular, the educational components addressing the production of bioethanol, biodiesel, and bioplastics provide graduates that can assist American industries in including greater renewable content in feedstocks for materials and fuels. Finally, the collaboration fostered by this grant led to the drafting of a new book entitled, Bioengineering for Sustainability: Materials and Fuels for the 21st Century. This text will be widely available to the public interested in learning more about these important areas of technology.

John R. Dorgan

2005-09-30T23:59:59.000Z

67

Aggregate Production Planning for Process Industries under Competition  

E-Print Network (OSTI)

A Linear Programming Approach to Production and EmploymentA.C. 1978. “Aggregate Production Planning. ” Handbook ofH.A. Simon. 1960. Planning Production, Inventories and Work

Karmarkar, U. S.; Rajaram, K.

2008-01-01T23:59:59.000Z

68

Industry  

E-Print Network (OSTI)

the paper, glass or ceramics industry) making it difficulttechnology in the ceramic manufacturing industry. industries: iron and steel, non-ferrous metals, chemicals (including fertilisers), petroleum refining, minerals (cement, lime, glass and ceramics) and

Bernstein, Lenny

2008-01-01T23:59:59.000Z

69

Industry  

E-Print Network (OSTI)

in the iron and steel industry: a global model. Energy, 30,report of the world steel industry 2005. International Irontrends in the iron and steel industry. Energy Policy, 30,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

70

Presentation 2.3: The sustainable forest products industry, carbon and climate change Mikael Hannus  

E-Print Network (OSTI)

consumption within the industry. · To assist in the efforts to reduce society's energy use and greenhouse gas emissions, the forest products industry can - become more energy efficient and increase its share of biomass in energy production; - help supply society with increasing amounts of wood and fibre for use as a raw

71

Cost estimating method of industrial product implemented in WinCOST software system  

Science Conference Proceedings (OSTI)

The paper presents a method for estimating the cost of industrial products and its implementation into a software system named WinCOST. The software is used for calculating the manufacturing time and cost evaluation of industrial products with high level ... Keywords: chip removing process, cold forming processes, cost estimation, cost per hour, software system

Gheorghe Oancea; Lucia Antoneta Chicos; Camil Lancea

2010-07-01T23:59:59.000Z

72

Summary Production Statistics of the U.S. Uranium Industry ...  

U.S. Energy Information Administration (EIA)

Domestic Uranium Production Report presents information Operating Status of U.S. Uranium Expenditures, 2003-2005. ... Mine Production of Uranium

73

Bailey's Industrial Oil and Fat Products, Volume 5  

Science Conference Proceedings (OSTI)

Edible Oils (Volume 5) First published in 1945, Bailey's has become the standard reference on the food chemistry and processing technology related to edible oils and the nonedible byproducts derived from oils. Bailey's Industrial O

74

Bailey's Industrial Oil and Fat Products, Volume 4  

Science Conference Proceedings (OSTI)

Edible Oils (Volume 4) First published in 1945, Bailey's has become the standard reference on the food chemistry and processing technology related to edible oils and the nonedible byproducts derived from oils. Bailey's Industrial O

75

Bailey's Industrial Oil and Fat Products, Volume 3  

Science Conference Proceedings (OSTI)

Edible Oils (Volume 3) First published in 1945, Bailey's has become the standard reference on the food chemistry and processing technology related to edible oils and the nonedible byproducts derived from oils. Bailey's Industrial O

76

Bailey's Industrial Oil and Fat Products, Volume 6  

Science Conference Proceedings (OSTI)

Edible Oils (Volume 6) First published in 1945, Bailey's has become the standard reference on the food chemistry and processing technology related to edible oils and the nonedible byproducts derived from oils. Bailey's Industrial O

77

Industry  

E-Print Network (OSTI)

and power in US industry. Energy Policy, 29, pp. 1243-1254.Paris. IEA, 2004: Energy Policies of IEA Countries: Finlandand steel industry. Energy Policy, 30, pp. 827-838. Kim, Y.

Bernstein, Lenny

2008-01-01T23:59:59.000Z

78

Total factor productivity growth in Uganda's telecommunications industry  

Science Conference Proceedings (OSTI)

The telecommunication sector is usually thought to be characterized by high productivity growth rates arising from increasing returns to scale. The actual productivity patterns in the sector, however, need to be empirically determined. A panel data set ... Keywords: Data envelopment analysis, Malmquist, Telecommunications, Total factor productivity

Eria Hisali; Bruno Yawe

2011-02-01T23:59:59.000Z

79

CALENDAR YEAR 2012 SCHEDULE Workshops to Improve Industrial Productivity by  

E-Print Network (OSTI)

. It covers material in steam generation efficiency, steam distribution system losses, and resource. For complete course information: http://www.eere.energy.gov/industry/bestpractices/pumping_systems.html Steam System Assessment Many facilities can save energy through the installation of more efficient steam

80

Training Needs in Louisiana's Value-Added Forest Products Industry  

E-Print Network (OSTI)

Economic Incentives Industry #12;What is Value-Added? The increased value at each stage of a manufacturingThe increased value at each stage of a manufacturing assembly processassembly process Those activities or steps and necessary Addition of net economic valueAddition of net economic value Value can be added through

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Productivity Improvement for Fossil Steam Power Plants: Industry Case Studies  

Science Conference Proceedings (OSTI)

The "Productivity Improvement Handbook for Fossil Steam Plants," now in its third edition, has included many descriptions of successfully applied advanced techniques and products. In the last few years, an increasingly diverse set of plant case studies have been described in some detail on the website of the Productivity Improvement User Group. This report assembles more than sixty of these case studies on subjects spanning the power plant from the boiler and the steam turbine, through plant auxiliaries ...

2003-11-17T23:59:59.000Z

82

In vitro starch digestibility and estimated glycemic index of sorghum products  

E-Print Network (OSTI)

Fractions from white and tannin sorghums were processed into extrudates, thick porridges, and breads. The effects of sorghum type and fraction on the in vitro starch availability of the products were evaluated, and the estimated glycemic indexes (EGI) of the products were obtained. Sorghum extrudates were significantly more slowly digested than corn meal extrudates for all preparation methods (whole, cracked and decorticated kernels). Furthermore, tannin extrudates were less digestible than white sorghum extrudates. The soft endosperm nature of the tannin sorghum limited friction formation inside the extruder, reducing starch gelatinization. On the other hand, condensed tannins also interfered with the starch availability for digestion. White sorghum was more 'suitable' for extrusion, giving extrudates with higher starch degradation and expansion than the tannin sorghums. However, tannin sorghums also gave acceptable products offering the benefit of lower EGI values. Sorghum porridges were more slowly digested than a corn flour porridge when using whole and decorticated flours. In addition, tannin sorghum porridges had a lower starch digestibility compared to all the samples. Tannin sorghum flours produced soft porridges with enhanced initial starch digestibility. However, condensed tannins seemed to offset the starch digestion by limiting starch availability. All sorghum porridges had significantly lower EGI values than the corn porridge. Extrudates and porridges had reduced starch digestibilities and EGI values when using whole grains compared to using the decorticated fractions. This was observed in both the white and the tannin sorghum. Therefore, whole-grain products from sorghum have health benefits attributed to whole grain foods and slower digesting starches; for instance, prevention and treatment of diseases such as diabetes, insulin resistance, obesity, cardiovascular disease, and some types of cancer. When 12% of tannin bran was added to a wheat bread formulation, a slower rate of starch digestion was observed compared to a wheat bread. The high concentration of non-starch components of the bran (i.e. dietary fiber, condensed tannins) affected starch digestion. The addition of tannin sorghum bran significantly reduced the EGI value of wheat bread, besides being a natural source of brown color, and an excellent source of antioxidants and dietary fiber.

De Castro Palomino Siller, Angelina

2003-05-01T23:59:59.000Z

83

Production of xylanase in transgenic tobacco for industrial use in ...  

Science Conference Proceedings (OSTI)

Apr 7, 2010 ... sion of abundant and renewable cellulosic biomass using ... of the plant cell wall hydrolyzed during biofuel production ...... input energy.

84

Industrial recovery capability. Final report. [Claus alumina catalyst for sulfur production  

SciTech Connect

This report provides an evaluation of the vulnerability - to a nuclear strike, terrorist attack, or natural disaster - of our national capacity to produce chlorine, beryllium, and a particular specialty alumina catalyst required for the production of sulfur. All of these industries are of critical importance to the United States economy. Other industries that were examined and found not to be particularly vulnerable are medicinal drugs and silicon wafers for electronics. Thus, only the three more vulnerable industries are addressed in this report.

Gregg, D.W.

1984-12-01T23:59:59.000Z

85

California`s forest products industry: 1992. Forest Service resource bulletin  

SciTech Connect

The report presents the findings of a survey of primary forest products industries in California for 1992. The survey included the following sectors: Lumber, pulp and board; shake and shingle; export; and post, pole, and piling. Veneer and plywood mills are not included because they could not be presented without disclosng critical details. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed, and disposition of mill residence.

Ward, F.R.

1995-03-01T23:59:59.000Z

86

Oregon`s forest products industry: 1992. Forest Service resource bulletin  

SciTech Connect

The report presents the findings of a survey of primary forest products industries in Oregon for 1992. The survey included the following sectors; lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tables presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed, and disposition of mill residues.

Ward, F.R.

1995-03-01T23:59:59.000Z

87

Solar production of industrial process steam. Final detail design report  

SciTech Connect

The application of solar energy to produce 110 psig industrial steam for processing laundry and drycleaning for a facility in Pasadena, California, is described. The system uses tracking parabolic trough collectors. The collectors, the detailed process analyses, solar calculations and insolation data, energy reduction analyses, economic analyses, design of the solar system, construction, and costs are presented in detail. Included in appendices are the following: mechanical specifications and calculations, electrical specifications and calculations, and structural specifications and calculations. (MHR)

Eldridge, B.G.

1978-06-15T23:59:59.000Z

88

Improving productivity in food processing industries using simulation: a case study  

Science Conference Proceedings (OSTI)

Process optimization is a major decision problem when drawing a balance between meeting variable demands and maintaining the quality of products in food processing industries. Simulation is a useful technique to study the effects of system changes in ... Keywords: business process reengineering, food processing, production planning, productivity, simulation models

Seraj Yousef Abed

2008-07-01T23:59:59.000Z

89

Industry Strategic Executive Overview: Highlights of the Fabricated Structural Metal Products Industry  

Science Conference Proceedings (OSTI)

The fabricated structural metals industry (SIC 344) is a dynamic marketplace with a wide variety of energy usages and issues that present several opportunities for energy service providers. The segment has been successful in the last decade beyond all forecasts and the growth is predicted to continue. However, this sector faces a wide variety of issues that range from a rapid drive toward automation to increasingly stringent regulatory and environmental controls that make them an enticing target and natu...

2002-02-06T23:59:59.000Z

90

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and...

91

Internet Business Opportunities in the Forest Products Industry  

E-Print Network (OSTI)

-Forest Products Marketing Interim Director-Louisiana Forest Products Laboratory School of Renewable Natural KINGDOM 26.0 5% 5 FRANCE 21.8 4% 6 ITALY 17.5 3% 7 CANADA 16.0 3% 8 CHINA 15.9 3% 9 AUSTRALIA 10.6 2% 10

92

Establishment of a Graduate Certificate Program in Biobased Industrial Products – Final Technical Report  

DOE Green Energy (OSTI)

A certificate of graduate studies in Biobased Industrial Products is to be established at Kansas State University (KSU) along with the development of a similar program at Pittsburg State University, Pittsburg, KS. At KSU, the program of study will be coordinated through the steering committee of the Agricultural Products Utilization Forum (APUF); the certificate of graduate studies will be awarded through the Graduate School of Kansas State University. This certificate will establish an interdisciplinary program of study that will: (1) ensure participating students receive a broad education in several disciplines related to Biobased Industrial Products, (2) provide a documented course of study for students preferring a freestanding certificate program, and (3) provide a paradigm shift in student awareness away from petroleum-based feedstocks to the utilization of renewable resources for fuels and chemical feedstocks. The academic program described herein will accomplish this goal by: (1) providing exposure to several academic disciplines key to Biobased Industrial Products; (2) improving university/industry collaboration through an external advisory board, distance learning opportunities, and student internships; (3) expanding the disciplines represented on the students' supervisory committee; (4) establishing a seminar series on Biobased Industrial Products that draws upon expert speakers representing several disciplines; and (5) increasing collaboration between disciplines. Numerous research programs emphasizing Biobased Industrial Products currently exist at KSU and PSU. The certificate of graduate studies, the emphasis on interdisciplinary collaboration within the students? thesis research, the proposed seminar series, and formation of an industrial advisory board will: (1) provide an interdisciplinary academic experience that spans several departments, four colleges, four research centers, and two universities; (2) tangibly promote collaboration between KSU and PSU; (3) catalyze involvement of plant geneticists with researchers active in the development and utilization of biobased industrial products; and, (4) promote university/industry collaboration.

John R. Schlup

2005-11-04T23:59:59.000Z

93

Establishment of a Graduate Certificate Program in Biobased Industrial Products – Final Technical Report  

SciTech Connect

A certificate of graduate studies in Biobased Industrial Products is to be established at Kansas State University (KSU) along with the development of a similar program at Pittsburg State University, Pittsburg, KS. At KSU, the program of study will be coordinated through the steering committee of the Agricultural Products Utilization Forum (APUF); the certificate of graduate studies will be awarded through the Graduate School of Kansas State University. This certificate will establish an interdisciplinary program of study that will: (1) ensure participating students receive a broad education in several disciplines related to Biobased Industrial Products, (2) provide a documented course of study for students preferring a freestanding certificate program, and (3) provide a paradigm shift in student awareness away from petroleum-based feedstocks to the utilization of renewable resources for fuels and chemical feedstocks. The academic program described herein will accomplish this goal by: (1) providing exposure to several academic disciplines key to Biobased Industrial Products; (2) improving university/industry collaboration through an external advisory board, distance learning opportunities, and student internships; (3) expanding the disciplines represented on the students' supervisory committee; (4) establishing a seminar series on Biobased Industrial Products that draws upon expert speakers representing several disciplines; and (5) increasing collaboration between disciplines. Numerous research programs emphasizing Biobased Industrial Products currently exist at KSU and PSU. The certificate of graduate studies, the emphasis on interdisciplinary collaboration within the students? thesis research, the proposed seminar series, and formation of an industrial advisory board will: (1) provide an interdisciplinary academic experience that spans several departments, four colleges, four research centers, and two universities; (2) tangibly promote collaboration between KSU and PSU; (3) catalyze involvement of plant geneticists with researchers active in the development and utilization of biobased industrial products; and, (4) promote university/industry collaboration.

John R. Schlup

2005-11-04T23:59:59.000Z

94

Production, prices, employment, and trade in northwest forest industries, fourth quarter 1992. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

The report provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1993-07-01T23:59:59.000Z

95

Production, prices, employment, and trade in northwest forest industries, second quarter 1994. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

The report provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood, volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1995-01-01T23:59:59.000Z

96

Production, prices, employment and trade in northwest forest industries, second quarter 1996. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

The report provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1996-11-01T23:59:59.000Z

97

Production, prices, employment, and trade in northwest forest industries, third quarter 1992. Forest Service resource bulletin  

SciTech Connect

The report includes current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1993-03-01T23:59:59.000Z

98

Production, prices, employment, and trade in northwest forest industries, second quarter 1995. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1996-01-01T23:59:59.000Z

99

Production, prices, employment, and trade in northwest forest industries, first quarter 1994. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

The report provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood, volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1994-11-01T23:59:59.000Z

100

Production, prices, employment, and trade in northwest forest industries, first quarter 1995. Forest Service resource bulletin  

SciTech Connect

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood, volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1995-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Production, prices, employment, and trade in northwest forest industries, second quarter 1993. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

The report includes current information on lumber and plywood production and prices, employment in the forest industries; international trade in logs, lumber and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1994-01-01T23:59:59.000Z

102

Production, prices, employment, and trade in northwest forest industries, first quarter 1996. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood, volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1996-07-01T23:59:59.000Z

103

Production, prices, employment, and trade in northwest forest industries, fourth quarter 1996. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1997-07-01T23:59:59.000Z

104

Production, prices, employment, and trade in northwest forest industries, second quarter 1992. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

The report provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1992-01-01T23:59:59.000Z

105

Production, prices, employment, and trade in northwest forest industries, second quarter 1997. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1998-03-01T23:59:59.000Z

106

Production, prices, employment, and trade in northwest forest industries, fourth quarter 1993. Forest Service resource bulletin  

SciTech Connect

The report includes current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood, volume and average prices in stumpage sold by public agencies; and other related items.

Warren, D.D.

1994-05-01T23:59:59.000Z

107

Production, prices, employment, and trade in northwest forest industries, third quarter 1996. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1997-02-01T23:59:59.000Z

108

Production, prices, employment, and trade in northwest forest industries, first quarter 1993. Forest Service resource bulletin  

Science Conference Proceedings (OSTI)

The report includes current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1993-11-01T23:59:59.000Z

109

Palm Oil: Production, Processing, Uses, and CharacterizationChapter 25 Sustainable Development of Palm Oil Industry  

Science Conference Proceedings (OSTI)

Palm Oil: Production, Processing, Uses, and Characterization Chapter 25 Sustainable Development of Palm Oil Industry Food Science Health Nutrition Biochemistry Processing eChapters Food Science & Technology Health - Nutrition - Biochemi

110

Sources of the German Productivity Demise* Tracing the Effects of Industry-Level ICT Investment  

E-Print Network (OSTI)

While the US experienced two successive productivity surges in 1995 and 2000, Germany’s labor productivity declined dramatically during the same period. We examine the sources of Germany’s productivity demise using the ifo productivity database that provides detailed industry-level investment information. While much attention has focused on the reduction in German labor hours, our data show that Information, Communication and Technology (ICT) investment in Germany was deeply lacking in the mid 1990’s as compared to the US. The transition to the new economy mitigated the German productivity slowdown, but did not reverse it. After 2000, we find that German Non-ICT investment surged, but TFP contributions collapsed as more than half of the industries, accounting for almost 50 percent of German output, experienced negative TFP growth. This second major difference between the US and German industry performance explains Germany’s continued departure from the technological frontier.

Theo S. Eicher; Oliver Roehn

2006-01-01T23:59:59.000Z

111

Liberalization policy, production and cost efficiency in Taiwan's telecommunications industry  

Science Conference Proceedings (OSTI)

Many economists, policy-makers, and corporate managers have long believed that the operational performance of private enterprises is much more efficient than that of public utilities. However, some researches on changes in efficiency before and after ... Keywords: Cost efficiency, DEA, Privatization, Productivity, Telecommunication

Chao-Chung Kang

2010-02-01T23:59:59.000Z

112

Scheduling an Industrial Production Facility Eyjolfur Asgeirsson1  

E-Print Network (OSTI)

with the Pantex plan- ning problem. Second, we wanted to experimentally test various ideas, designed originally National Laboratories has developed and implemented the Pantex Process Model (PPM) [7] to support planning activities at Pantex, a US Department of Energy (DOE) production plant in Amarillo, Texas. The plant

Ásgeirsson, Eyjólfur Ingi

113

Innovation and production in the global solar photovoltaic industry  

Science Conference Proceedings (OSTI)

The global development of solar photovoltaic power is seen as a potentially major technology in the pursuit of alternative energy sources. Given its evolutionary nature, in terms of both technology and the market, there is some discernible divergence ... Keywords: Innovation, Patent, Production, Solar photovoltaic (PV) market

Show-Ling Jang; Li-Ju Chen; Jennifer H. Chen; Yu-Chieh Chiu

2013-03-01T23:59:59.000Z

114

An Overview of the Louisiana Secondary Wood Products Industry  

E-Print Network (OSTI)

the State of Louisiana. In addition, because the origin of material purchased from in-state suppliers cannot of the development of buying or manufacturing cooperatives that could create purchasing and sales/marketing leverage Secondary Wood Product Manufacturers Number of Employees by Establishment (Percent of respondent companies

115

Industry  

E-Print Network (OSTI)

milling industry: An ENERGY STAR Guide for Energy and Plantcement mak- ing - An ENERGY STAR Guide for Energy and Plantre- fineries - An ENERGY STAR Guide for Energy and Plant

Bernstein, Lenny

2008-01-01T23:59:59.000Z

116

The Influence of Product Markets on Industrial Relations  

E-Print Network (OSTI)

railways, bus transport, road haulage, telecommunications, docks, vehicle, aircraft and ship manufacture, steel, gas, water, electricity, coal, munitions, airlines, research laboratories, recruitment services, waste disposal, airports, publishing... of market and labor, of merchant and wage-earner, of prices and wages.’ (op. cit.: 261) Associations of manufacturers are primarily price-regarding. An extension of the product market, to include lower-paying marginal producers, is likely to provoke...

Brown, William

117

The role of ICT in Korea's economic growth: Productivity changes across industries since the 1990s  

Science Conference Proceedings (OSTI)

This paper investigates the hypothesis that technological convergence has been a major driving force for the recent productivity increase in Korea. Based on the dynamic panel data of Korean industries, the direct impact of information and communication ... Keywords: ICT development, Productivity, Regulatory policy, Technological convergence

Hyun-Joon Jung, Kyoung-Youn Na, Chang-Ho Yoon

2013-05-01T23:59:59.000Z

118

Production, prices, employment, and trade in northwest forest industries, third quarter 1995. Forest Service resource bulletin  

SciTech Connect

The report presents current information on the timber situation in Alaska, Washington, Oregon, California, Montana, Idaho, and British Columbia, including data on lumber and plywood production and prices; timber harvest; employment in forest products industries; international trade in logs, pulpwood, chips, lumber, and plywood; log prices in the Pacific Northwest; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1996-03-01T23:59:59.000Z

119

Production, prices, employment, and trade in northwest forest industries, third quarter 1994. Forest Service resource bulletin  

SciTech Connect

The report presents current information on the timber situation in Alaska, Washington, Oregon, California, Montana, Idaho, and British Columbia, including data on lumber and plywood production and prices; timber harvest; employment in forest products industries; international trade in logs, pulpwood, chips, lumber, and plywood; log prices in the Pacific Northwest; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1995-03-01T23:59:59.000Z

120

Production, prices, employment, and trade in northwest forest industries, fourth quarter 1995. Forest Service resource bulletin  

SciTech Connect

This report presents current information on the timber situation in Alaska, Washington, Oregon, California, Montana, Idaho, and British Columbia, including data on lumber and plywood production and prices; timber harvest; employment in forest products industries; international trade in logs, pulpwood, chips, lumber, and plywood; log prices in the Pacific Northwest; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1996-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Production, prices, employment, and trade in northwest forest industries, fourth quarter 1994. Forest Service resource bulletin  

SciTech Connect

The report presents current information on the timber situation in Alaska, Washington, Oregon, California, Montana, Idaho, and British Columbia, including data on lumber and plywood production and prices; timber harvest; employment in forest products industries; international trade in logs, pulpwood, chips, lumber, and plywood; log prices in the Pacific Northwest; volume and average prices of stumpage sold by public agencies; and other related items.

Warren, D.D.

1995-06-01T23:59:59.000Z

122

A-Z Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Productivity High Technology and Industrial Systems Home Energy Saver for Consumers Home Energy Saver for Professionals...

123

Representation of Energy Use in the Food Products Industry  

E-Print Network (OSTI)

Traditional representations of energy in the manufacturing sector have tended to represent energy end-uses rather than actual energy service demands. While this representation if quite adequate for understanding how energy is used today, for forecasting future technology choices it is creates a rigid representation of how future energy is used. This representation can restrict the range of technology choices considered, particularly for fuel switching and on-site conversion processes such as combined heat and power (CHP). This paper discusses the differences between energy end-uses and service demands, proposes an approach for approximating service demands and discusses the ramifications of this alternative representation to energy modeling. An example for food products manufacturing (NAICS 311) is provided as an example.

Elliott, N. R.

2007-01-01T23:59:59.000Z

124

Groundwater Monitoring Guidance for the Industry Action Plan on Coal Combustion Product Management  

Science Conference Proceedings (OSTI)

The US Environmental Protection Agency (USEPA) is scheduled to release federal guidelines for management of coal combustion products (CCPs) in 2007. The utility industry has developed a voluntary Action Plan as an alternative to the federal guidelines. In either case, groundwater monitoring will be required. The purpose of this report is to provide guidance for implementing a groundwater-monitoring program at CCP management sites consistent with the Action Plan proposed by the utility industry.

2005-12-07T23:59:59.000Z

125

The impact of energy prices on industrial energy efficiency and productivity  

SciTech Connect

Energy prices moved into the forefront of concern in the mid and late seventies when two oil price shocks drove up energy prices dramatically. The analysis of the subsequent increase in industrial energy efficiency, i.e., decline in energy use per unit of industrial output, has filled volumes of government and private studies. Despite the volumes of analysis, there remains no consensus on the magnitude of the effect of energy prices on industrial energy efficiency or the effect of the change in energy prices on productivity. This paper examines some sources of the controversy to initiate a dialog between policy makers, analysts, and the energy consumers and producers.

Boyd, G.A.

1993-11-01T23:59:59.000Z

126

Industrial  

Gasoline and Diesel Fuel Update (EIA)

Industrial Industrial 8,870,422 44.3% Commercial 3,158,244 15.8% Electric Utilities 2,732,496 13.7% Residential 5,241,414 26.2% Source: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." T e x a s L o u i s i a n a C a l i f o r n i a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Industrial Billion Cubic Meters T e x a s C a l i f o r n i a F l o r i d a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Electric Utilities Billion Cubic Meters N e w Y o r k C a l i f o r n i a I l l i n o i s A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Commercial Billion Cubic Meters I l l i n o i s C a l i f o r n i a N e w Y o r k A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Residential Billion Cubic Meters 11. Natural Gas Delivered to Consumers in the United States, 1996 Figure Volumes in Million Cubic Feet Energy Information Administration

127

Industry  

E-Print Network (OSTI)

of 81 Chapter 7 Final Draft 2030 production (Mt) a A1 B2 GHGpotential and cost in 2030 Notes and sources: a Price etelectrode technology by 2030. g Humphreys and Mahasenan,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

128

Influence of combustion parameters on NOx production in an industrial boiler  

E-Print Network (OSTI)

Influence of combustion parameters on NOx production in an industrial boiler M.A. Habib a,*, M; accepted 14 April 2007 Available online 24 June 2007 Abstract NOx formation during the combustion process occurs mainly through the oxidation of nitrogen in the combustion air (thermal NOx) and through oxidation

Aldajani, Mansour A.

129

Social media in the product development process of the automotive industry: a new approach  

Science Conference Proceedings (OSTI)

This paper introduces a new methodology for implementing social media monitoring into an important stage of the innovation process within the automotive industry -- the prototype stage. The information gathered on social media channels was used for project ... Keywords: electric mobility, electric vehicles, product development, social media monitoring, social networking sites

Andreas Klein, Götz Spiegel

2013-07-01T23:59:59.000Z

130

Equipment/product classification. [Equipment suppliers for the oil and gas industry  

SciTech Connect

This article contains information about the manufacturers and suppliers of goods for the oil and gas industry, including machines, software, services, and equipment used to build, operate, and maintain energy pipeline systems. The article represents companies around the world and are arranged by product category for ease of use.

Not Available

1994-05-01T23:59:59.000Z

131

Manufacturing sector carbon dioxide emissions in nine OECD countries 1973--87: A Divisia index decomposition to changes in fuel mix, emission coefficients, industry structure, energy intensities, and international structure  

DOE Green Energy (OSTI)

In this paper the reduction in energy-related manufacturing carbon dioxide emissions for nine OECD countries in the period 1973 to 1987 is analyzed. Carbon dioxide emissions are estimated from energy use data. The emphasis is on carbon dioxide intensities, defined as emissions divided by value added. The overall manufacturing carbon dioxide intensity for the nine OECD countries was reduced by 42% in the period 1973--1987. Five fuels are specified together with six subsectors of manufacturing. Carbon dioxide emissions are estimated from fossil fuel consumption, employing emissions coefficients for gas, oil and solids. In addition, electricity consumption is specified. For electricity use an emission coefficient index is calculated from the shares of fossil fuels, nuclear power and hydro power used to generate electricity, and the efficiency in electricity generation from these energy sources. A Divisia index approach is used to sort out the contribution to reduced carbon dioxide intensity from different components. The major finding is that the main contribution to reduced carbon dioxide intensity is from the general reduction in manufacturing energy intensity, most likely driven by economic growth and increased energy prices, giving incentives to invest in new technology and new industrial processes. There is also a significant contribution from reduced production in the most carbon dioxide intensive subsectors, and a contribution from higher efficiency in electricity generation together with a larger nuclear power share at the expense of oil. 19 refs., 5 figs., 11 tabs.

Torvanger, A. (Senter for Anvendt Forskning, Oslo (Norway) Lawrence Berkeley Lab., CA (USA))

1990-11-01T23:59:59.000Z

132

Production of precipitated calcium carbonate from industrial by-product slags (Slag2PCC)  

E-Print Network (OSTI)

a commercial carbonate product by mineral carbonation could allow for higher process costs than what the CO2 a commercial calcium carbonate product should contain as little impurities as possible. Solution temperatureC Carbonation at 30 ºC (XCa = 68 %) Thickener Condenser Acetic acid 5.2 kg Gel residue 1.1 kg NaOH, 2.6 kg

Zevenhoven, Ron

133

Poultry Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. poultry industry and ways in which electric-powered processes and technologies can be used in poultry and egg production and processing. The poultry industry, which consists of poultry production for meat as well as egg production and processing, is one of the fastest growing segments of the U.S. food manufacturing industry. It is also an energy-intensive industry. In fact, a 2010 report by the USDA illustrates ...

2011-03-30T23:59:59.000Z

134

Shenzhen Prosunpro PengSangPu Solar Industrial Products Corporation | Open  

Open Energy Info (EERE)

Prosunpro PengSangPu Solar Industrial Products Corporation Prosunpro PengSangPu Solar Industrial Products Corporation Jump to: navigation, search Name Shenzhen Prosunpro/ PengSangPu Solar Industrial Products Corporation Place Shenzhen, Guangdong Province, China Zip 518055 Sector Solar Product Shenzhen Prosunpro makes and installs flat panel solar passive energy collectors and engineers central solar hot water systems. Coordinates 22.546789°, 114.112556° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":22.546789,"lon":114.112556,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

135

TrendSetter Solar Products Inc aka Trendsetter Industries formerly Six  

Open Energy Info (EERE)

TrendSetter Solar Products Inc aka Trendsetter Industries formerly Six TrendSetter Solar Products Inc aka Trendsetter Industries formerly Six River Solar Jump to: navigation, search Name TrendSetter Solar Products Inc (aka Trendsetter Industries, formerly Six River Solar) Place Fairhaven, California Zip 95564 Sector Solar Product Manufacturer of solar hot water heating and storage systems. Coordinates 41.63548°, -70.903856° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.63548,"lon":-70.903856,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

136

South Dakota timber industry: An assessment of timber product output and use, 1993. Forest Service resource bulletin  

SciTech Connect

Reports findings of a survey of all primary wood-using mills in South Dakota in 1993 and compares those findings with earlier surveys. Reports production and receipts of industrial roundwood by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by South Dakota`s primary wood-using industry.

Hackett, R.L.; Sowers, R.A.

1996-10-04T23:59:59.000Z

137

Center for Productivity Innovation's Student Project with Industry Program at the University of Tennessee, Department of Industrial and Systems Engineering  

Science Conference Proceedings (OSTI)

A robust graduate engineering education experience requires students to learn the fundamental subject knowledge, to develop their ability to apply what they know to actual projects, and to contribute to the current body of knowledge by writing theses ... Keywords: Student Projects with Industry, engineering education, graduate research and education, industrial engineering, industry-university interaction

Rapinder Sawhney, Sima Maleki, Joseph Wilck, Pedraum Hashemian

2013-01-01T23:59:59.000Z

138

How indexes have changed  

Science Conference Proceedings (OSTI)

The accompanying table compares refinery construction and operating wages monthly for the years 1992 and 1993. The Nelson-Farrar refinery construction cost indexes are inflation indexes, while the operating indexes incorporate a productivity which shows improvement with experience and the increasing size of operations. The refinery construction wage indexes in the table show a steady advance over the 2-year period. Common labor indexes moved up faster than skilled indexes. Refinery operating wages showed a steady increase, while productivities averaged higher near the end of the period. Net results is that labor costs remained steady for the period.

Farrar, G.L.

1994-04-04T23:59:59.000Z

139

WATER AND BY-PRODUCT ISSUES IN THE ELECTRIC-UTILITY INDUSTRY  

NLE Websites -- All DOE Office Websites (Extended Search)

and Power Conference in conjunction with 2 and Power Conference in conjunction with 2 nd Joint U.S.-People's Republic of China Conference on Clean Energy, November 17-19, 2003, Washington, DC A DOE R&D RESPONSE TO EMERGING COAL BY-PRODUCT AND WATER ISSUES IN THE ELECTRIC-UTILITY INDUSTRY Thomas J. Feeley, III Technology Manager U.S. Department of Energy - Office of Fossil Energy National Energy Technology Laboratory Pittsburgh, PA ABSTRACT While the regulation and control of air emissions will continue to be of primary concern to the electric-utility industry over the next several decades, other environmental-related issues may also impact the operation of existing and new coal-based power systems. Coal by-products are one such issue. Coal-fired power plants generate nearly 118 million tons of fly ash, flue gas

140

Solar production of industrial process steam for the Lone Star Brewery. Conceptual design report  

DOE Green Energy (OSTI)

The project conceptual design activities are divided into six parts: Industrial Plant, Conceptual System Design, Collector Selection, Heat Transfer Fluid Selection, Site Fabrication, and Engineered Equipment. Included is an overview of the solar steam system and a brief discussion on the environmental impact of the project as well as the safety considerations of the system design. The effect of the solar system on the environment is negligible, and the safety analysis of the system indicates the considerations to be taken to minimize any potential safety hazard due to contamination of the food product or to fire. Both of these potential hazards are discussed in detail. Both the question of product contamination and the question of potential fire hazards will be presented to the industrial partner's safety committee so that the selection of the heat transfer fluid meets with their approval.

Deffenbaugh, D.M.

1978-12-29T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Price control regulation in North America: role of indexing and benchmarking  

Science Conference Proceedings (OSTI)

Price cap plans in regulation are designed to mimic competition. The authors present the index logic that underpins this rationale in North American plans and offer two statistical approaches - indexing and benchmarking - that play a role in determining industry and/or national productivity trends and economy and/or industry input price trends that are used to track the unit cost of the industry. (author)

Lowry, Mark N.; Getachew, Lullit

2009-01-15T23:59:59.000Z

142

Biological Air Emissions Control for an Energy Efficient Forest Products Industry of the Future  

Science Conference Proceedings (OSTI)

The U.S. wood products industry is a leader in the production of innovative wood materials. New products are taking shape within a growth industry for fiberboard, plywood, particle board, and other natural material-based energy efficient building materials. However, at the same time, standards for clean air are becoming ever stricter. Emissions of volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) during production of wood products (including methanol, formaldehyde, acetylaldehyde, and mercaptans) must be tightly controlled. Conventional VOC and HAP emission control techniques such as regenerative thermal oxidation (RTO) and regenerative catalytic oxidation (RCO) require significant amounts of energy and generate secondary pollutants such as nitrogen oxides and spent carbon. Biological treatment of air emissions offers a cost-effective and sustainable control technology for industrial facilities facing increasingly stringent air emission standards. A novel biological treatment system that integrates two types of biofilter systems, promises significant energy and cost savings. This novel system uses microorganisms to degrade air toxins without the use of natural gas as fuel or the creation of secondary pollutants. The replacement of conventional thermal oxidizers with biofilters will yield natural gas savings alone in the range of $82,500 to $231,000 per year per unit. Widespread use of biofilters across the entire forest products industry could yield fuel savings up to 5.6 trillion Btu (British thermal units) per year and electricity savings of 2.1 trillion Btu per year. Biological treatment systems can also eliminate the production of NOx, SO2, and CO, and greatly reduce CO2 emissions, when compared to conventional thermal oxidizers. Use of biofilters for VOC and HAP emission control will provide not only the wood products industry but also the pulp and paper industry with a means to cost-effectively control air emissions. The goal of this project was to demonstrate a novel sequential treatment technology that integrates two types of biofilter systems – biotrickling filtration and biofiltration – for controlling forest product facility air emissions with a water-recycling feature for water conservation. This coupling design maximizes the conditions for microbial degradation of odor causing compounds at specific locations. Water entering the biotrickling filter is collected in a sump, treated, and recycled back to the biotrickling filter. The biofilter serves as a polishing step to remove more complex organic compounds (i.e., terpenes). The gaseous emissions from the hardboard mill presses at lumber plants such as that of the Stimson Lumber Company contain both volatile and condensable organic compounds (VOC and COC, respectively), as well as fine wood and other very small particulate material. In applying bio-oxidation technology to these emissions Texas A&M University-Kingsville (TAMUK) and Bio•Reaction (BRI) evaluated the potential of this equipment to resolve two (2) control issues which are critical to the industry: • First, the hazardous air pollutant (HAP) emissions (primarily methanol and formaldehyde) and • Second, the fine particulate and COC from the press exhaust which contribute to visual emissions (opacity) from the stack. In a field test in 2006, the biological treatment technology met the HAP and COC control project objectives and demonstrated significantly lower energy use (than regenerative thermal oxidizers (RTOs) or regenerative catalytic oxidizers (RCOs), lower water use (than conventional scrubbers) all the while being less costly than either for maintenance. The project was successfully continued into 2007-2008 to assist the commercial partner in reducing unit size and footprint and cost, through added optimization of water recycle and improved biofilm activity, and demonstration of opacity removal capabilities.

Jones, K; Boswell, J.

2009-05-28T23:59:59.000Z

143

Benefits of supplementing an industrial waste anaerobic digester with energy crops for increased biogas production  

SciTech Connect

Highlights: Black-Right-Pointing-Pointer This study demonstrates the feasibility of co-digestion food industrial waste with energy crops. Black-Right-Pointing-Pointer Laboratory batch co-digestion led to improved methane yield and carbon to nitrogen ratio as compared to mono-digestion of industrial waste. Black-Right-Pointing-Pointer Co-digestion was also seen as a means of degrading energy crops with nutrients addition as crops are poor in nutrients. Black-Right-Pointing-Pointer Batch co-digestion methane yields were used to predict co-digestion methane yield in full scale operation. Black-Right-Pointing-Pointer It was concluded that co-digestion led an over all economically viable process and ensured a constant supply of feedstock. - Abstract: Currently, there is increasing competition for waste as feedstock for the growing number of biogas plants. This has led to fluctuation in feedstock supply and biogas plants being operated below maximum capacity. The feasibility of supplementing a protein/lipid-rich industrial waste (pig manure, slaughterhouse waste, food processing and poultry waste) mesophilic anaerobic digester with carbohydrate-rich energy crops (hemp, maize and triticale) was therefore studied in laboratory scale batch and continuous stirred tank reactors (CSTR) with a view to scale-up to a commercial biogas process. Co-digesting industrial waste and crops led to significant improvement in methane yield per ton of feedstock and carbon-to-nitrogen ratio as compared to digestion of the industrial waste alone. Biogas production from crops in combination with industrial waste also avoids the need for micronutrients normally required in crop digestion. The batch co-digestion methane yields were used to predict co-digestion methane yield in full scale operation. This was done based on the ratio of methane yields observed for laboratory batch and CSTR experiments compared to full scale CSTR digestion of industrial waste. The economy of crop-based biogas production is limited under Swedish conditions; therefore, adding crops to existing industrial waste digestion could be a viable alternative to ensure a constant/reliable supply of feedstock to the anaerobic digester.

Nges, Ivo Achu, E-mail: Nges.Ivo_Achu@biotek.lu.se [Department of Biotechnology, Lund University, P.O. Box 124, SE 221 00 Lund (Sweden); Escobar, Federico; Fu Xinmei; Bjoernsson, Lovisa [Department of Biotechnology, Lund University, P.O. Box 124, SE 221 00 Lund (Sweden)

2012-01-15T23:59:59.000Z

144

Comparison of conventional and solar-water-heating products and industries report  

DOE Green Energy (OSTI)

President Carter established a goal that would require installation of at least one million solar water heaters by 1985 and 20 million water-heating systems by the year 2000. The goals established require that the solar industry be sufficiently mature to provide cost-effective, reliable designs in the immediate future. The objective of this study was to provide the Department of Energy with quantified data that can be used to assess and redirect, if necessary, the program plans to assure compliance with the President's goals. Results deal with the product, the industry, the market, and the consumer. All issues are examined in the framework of the conventional-hot-water industry. Based on the results of this solar hot water assessment study, there is documented proof that the solar industry is blessed with over 20 good solar hot water systems. A total of eight generic types are currently being produced, but a majority of the systems being sold are included in only five generic types. The good systems are well-packaged for quality, performance and installation ease. These leading systems are sized and designed to fit the requirements of the consumer in every respect. This delivery end also suffers from a lack of understanding of the best methods for selling the product. At the supplier end, there are problems also, including: some design deficiencies, improper materials selection and, occasionally, the improper selection of components and subsystems. These, in total, are not serious problems in the better systems and will be resolved as this industry matures.

Noreen, D; LeChevalier, R; Choi, M; Morehouse, J

1980-07-11T23:59:59.000Z

145

Dairy Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. dairy industry and ways in which electric-powered processes and technologies can be used in milk production and processing. Because of the different processes involved, the characteristics of energy consumption at milk production and processing facilities vary by facility. Most energy used in milk production is in the form of diesel fuel, followed by electricity and then by petroleum products such as gasoline an...

2011-03-30T23:59:59.000Z

146

Green IS for GHG emission reporting on product-level? an action design research project in the meat industry  

Science Conference Proceedings (OSTI)

Greenhouse gas emission reporting gained importance in the last years, due to societal and governmental pressure. However, this task is highly complex, especially in interdependent batch production processes and for reporting on the product-level. Green ... Keywords: GHG emissions, Green IS, PCF, action design research, design science, meat industry, product carbon footprint

Hendrik Hilpert, Christoph Beckers, Lutz M. Kolbe, Matthias Schumann

2013-06-01T23:59:59.000Z

147

The Pacific Northwest National Laboratory delivers financially attractive systems that use biomass to produce industrial and consumer products.  

E-Print Network (OSTI)

biomass to produce industrial and consumer products. While biomass holds potential for a ready supply from biomass--has stymied government and industry alike. The U.S. Department of Energy's Pacific to using biomass. Our research is focused on producing high-value bioproducts, such as chemicals

148

Productivity of the U.S. freight rail industry: a review of the past and prospects for the future  

E-Print Network (OSTI)

Productivity growth in the U.S. freight rail industry has slowed in recent years, raising the issue of the sustainability of the significant improvements achieved during the past three decades. Indeed, between 1979 and ...

Kriem, Youssef

2011-01-01T23:59:59.000Z

149

Palm Oil: Production, Processing, Uses, and CharacterizationChapter 23 Waste and Environmental Management in the Malaysian Palm Oil Industry  

Science Conference Proceedings (OSTI)

Palm Oil: Production, Processing, Uses, and Characterization Chapter 23 Waste and Environmental Management in the Malaysian Palm Oil Industry Food Science Health Nutrition Biochemistry Processing eChapters Food Science & Technology Heal

150

Highlights of Industrial Energy Audits with Application in Paper Product Manufacturing  

E-Print Network (OSTI)

Experience in executing comprehensive energy audits in varied industrial plants has resulted in a basic audit methodology and has revealed several interesting energy conservation opportunities applicable to paper products manufacturing. The most difficult and important part of an energy audit is the data collection that is necessary to fully understand the energy flows in the facility. Although many common opportunities exist that can be found in check lists, many opportunities are discovered only by a thorough understanding of the distribution of energy consumption that comes from detailed measurements and data analysis.

Hart, M. N.; Bond, S. K.

1979-01-01T23:59:59.000Z

151

Illinois mineral industry in 1978, and review of preliminary mineral production data for 1979  

SciTech Connect

This annual report of mineral production in Illinois in 1978 summarizes the output and value of minerals mined, and processed in Illinois, and of mineral products manufactured but not necessarily mined in Illinois. The total value of production in all three categories was $3170.7 million. The total value of mineral materials mined was $1637.0 million, with the mineral fuels-coal, crude oil, and natural gas-contributing 80.7 percent of the total value. Processed mineral materials were valued at $1206.9 million, and mineral products manufactured totaled $326.8 million in 1978. Coal continued to be the leading commodity in terms of value; oil ranked second; stone and sand and gravel, used largely for construction, ranked third and fourth; and fluorspar was fifth. Illinois remained the leading US producer of fluorspar, tripoli, and industrial sand, and ranked third in stone and peat, fifth in bituminous coal, sixth in total sand and gravel. Preliminary data indicate that the value of minerals mined in 1979 reached an all time high of $2131.0 million, from $1637.0 million in 1978. Detailed production summaries and analyses-including maps, tables, and graphs-are given for all mineral commodities.

Samson, I.

1981-02-01T23:59:59.000Z

152

INDEX | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INDEX INDEX INDEX More Documents & Publications Index2.doc ALPHABETICAL INDEX Topic Index to the DOE Administrative Records Disposition Schedules...

153

New process modeling [sic], design, and control strategies for energy efficiency, high product quality, and improved productivity in the process industries. Final project report  

SciTech Connect

This project was concerned with the development of process design and control strategies for improving energy efficiency, product quality, and productivity in the process industries. In particular, (i) the resilient design and control of chemical reactors, and (ii) the operation of complex processing systems, was investigated. Specific topics studied included new process modeling procedures, nonlinear controller designs, and control strategies for multiunit integrated processes. Both fundamental and immediately applicable results were obtained. The new design and operation results from this project were incorporated into computer-aided design software and disseminated to industry. The principles and design procedures have found their way into industrial practice.

Ray, W. Harmon

2002-06-05T23:59:59.000Z

154

An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 2  

Science Conference Proceedings (OSTI)

Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to the research, technology transfer/outreach was a large component of CPCPC's activities. Efficient technology transfer was critical for the deployment of new technologies into the field. CPCPC organized and hosted technology transfer meetings, tours, and tutorials, attended outreach conferences and workshops to represent CPCPC and attract new members, prepared and distributed reports and publications, and developed and maintained a Web site. The second contract ended December 31, 2010, and it is apparent that CPCPC positively impacted the carbon industry and coal research. Statistics and information were compiled to provide a comprehensive account of the impact the consortium had and the beneficial outcomes of many of the individual projects. Project fact sheet, success stories, and other project information were prepared. Two topical reports, a Synthesis report and a Web report, were prepared detailing this information.

Miller, Bruce; Winton, Shea

2010-12-31T23:59:59.000Z

155

An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 5  

Science Conference Proceedings (OSTI)

Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or {approx}28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to the research, technology transfer/outreach was a large component of CPCPC's activities. Efficient technology transfer was critical for the deployment of new technologies into the field. CPCPC organized and hosted technology transfer meetings, tours, and tutorials, attended outreach conferences and workshops to represent CPCPC and attract new members, prepared and distributed reports and publications, and developed and maintained a Web site. The second contract ended December 31, 2010, and it is apparent that CPCPC positively impacted the carbon industry and coal research. Statistics and information were compiled to provide a comprehensive account of the impact the consortium had and the beneficial outcomes of many of the individual projects. Project fact sheet, success stories, and other project information were prepared. Two topical reports, a Synthesis report and a Web report, were prepared detailing this information.

Miller, Bruce; Shea, Winton

2010-12-31T23:59:59.000Z

156

An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 1  

Science Conference Proceedings (OSTI)

Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to the research, technology transfer/outreach was a large component of CPCPC's activities. Efficient technology transfer was critical for the deployment of new technologies into the field. CPCPC organized and hosted technology transfer meetings, tours, and tutorials, attended outreach conferences and workshops to represent CPCPC and attract new members, prepared and distributed reports and publications, and developed and maintained a Web site. The second contract ended December 31, 2010, and it is apparent that CPCPC positively impacted the carbon industry and coal research. Statistics and information were compiled to provide a comprehensive account of the impact the consortium had and the beneficial outcomes of many of the individual projects. Project fact sheet, success stories, and other project information were prepared. Two topical reports, a Synthesis report and a Web report, were prepared detailing this information.

Miller, Bruce; Winton, Shea

2010-12-31T23:59:59.000Z

157

An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 3  

Science Conference Proceedings (OSTI)

Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to the research, technology transfer/outreach was a large component of CPCPC's activities. Efficient technology transfer was critical for the deployment of new technologies into the field. CPCPC organized and hosted technology transfer meetings, tours, and tutorials, attended outreach conferences and workshops to represent CPCPC and attract new members, prepared and distributed reports and publications, and developed and maintained a Web site. The second contract ended December 31, 2010, and it is apparent that CPCPC positively impacted the carbon industry and coal research. Statistics and information were compiled to provide a comprehensive account of the impact the consortium had and the beneficial outcomes of many of the individual projects. Project fact sheet, success stories, and other project information were prepared. Two topical reports, a Synthesis report and a Web report, were prepared detailing this information.

Miller, Bruce; Shea, Winton

2010-12-31T23:59:59.000Z

158

An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 4  

Science Conference Proceedings (OSTI)

Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or {approx}28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to the research, technology transfer/outreach was a large component of CPCPC's activities. Efficient technology transfer was critical for the deployment of new technologies into the field. CPCPC organized and hosted technology transfer meetings, tours, and tutorials, attended outreach conferences and workshops to represent CPCPC and attract new members, prepared and distributed reports and publications, and developed and maintained a Web site. The second contract ended December 31, 2010, and it is apparent that CPCPC positively impacted the carbon industry and coal research. Statistics and information were compiled to provide a comprehensive account of the impact the consortium had and the beneficial outcomes of many of the individual projects. Project fact sheet, success stories, and other project information were prepared. Two topical reports, a Synthesis report and a Web report, were prepared detailing this information.

Miller, Bruce; Shea, Winton

2010-12-31T23:59:59.000Z

159

Effect of industrial by-products containing electron acceptors on mitigating methane emission during rice cultivation  

Science Conference Proceedings (OSTI)

Three industrial by-products (fly ash, phosphogypsum and blast furnace slag), were evaluated for their potential re-use as soil amendments to reduce methane (CH{sub 4}) emission resulting from rice cultivation. In laboratory incubations, CH{sub 4} production rates from anoxic soil slurries were significantly reduced at amendment levels of 0.5%, 1%, 2% and 5% (wt wt{sup -1}), while observed CO{sub 2} production rates were enhanced. The level of suppression in methane production was the highest for phosphogypsum, followed by blast slag and then fly ash. In the greenhouse experiment, CH{sub 4} emission rates from the rice planted potted soils significantly decreased with the increasing levels (2-20 Mg ha{sup -1}) of the selected amendments applied, while rice yield simultaneously increased compared to the control treatment. At 10 Mg ha{sup -1} application level of the amendments, total seasonal CH{sub 4} emissions were reduced by 20%, 27% and 25%, while rice grain yields were increased by 17%, 15% and 23% over the control with fly ash, phosphogypsum, and blast slag amendments, respectively. The suppression of CH{sub 4} production rates as well as total seasonal CH{sub 4} flux could be due to the increased concentrations of active iron, free iron, manganese oxides, and sulfate in the amended soil, which acted as electron acceptors and controlled methanogens' activity by limiting substrates availability. Among the amendments, blast furnace slag and fly ash contributed mainly to improve the soil nutrients balance and increased the soil pH level towards neutral point, but soil acidity was developed with phosphogypsum application. Conclusively, blast slag among the selected amendments would be a suitable soil amendment for reducing CH{sub 4} emissions as well as sustaining rice productivity.

Ali, Muhammad Aslam [Department of Environmental Science, Bangladesh Agricultural University, Mymensingh 2202 (Bangladesh); Lee, Chang Hoon [Functional Cereal Crop Research Division, National Institute of Crop Science, RDA, 1085, Naey-dong, Milyang (Korea, Republic of); Kim, Sang Yoon [Division of Applied Life Science, Graduate School (Brain Korea 21 Program), Gyeongsang National University, Jinju 660-701 (Korea, Republic of); Kim, Pil Joo [Division of Applied Life Science, Graduate School (Brain Korea 21 Program), Gyeongsang National University, Jinju 660-701 (Korea, Republic of); Institute of Agriculture and Life Sciences, Gyeongsang National University, Jinju 660-701 (Korea, Republic of)], E-mail: pjkim@gnu.ac.kr

2009-10-15T23:59:59.000Z

160

Solar production of industrial process steam for the Lone Star Brewery. Final report  

DOE Green Energy (OSTI)

This report outlines the detailed design and system analysis of a solar industrial process steam system for the Lone Star Brewery. The industrial plant has an average natural gas usage of 12.7 MMcf per month. The majority of this energy goes to producing process steam of 125 psi and 353/sup 0/F at about 50,000 lb/h, with this load dropping to about 6000 lb/h on the weekends. The maximum steam production of the solar energy system is about 1700 lb/h. The climatic conditions at the industrial site give 50% of the possible amount of sunshine during the winter months and more than 70% during the summer months. The long-term yearly average daily total radiation on a horizontal surface is 1574 Btu/day-ft/sup 2/, the long-term yearly average daytime ambient temperature is 72/sup 0/F, and the percentage of clear day insolation received on the average day of the year is 62%. The solar steam system will consist of 9450 ft/sup 2/ of Solar Kinetics T-700 collectors arranged in fifteen 90-ft long rows through which 67.5 gpm of Therminol T-55 is pumped. This hot Therminol then transfers the heat collected to a Patterson-Kelley Series 380 unfired steam boiler. The solar-produced steam is then metered to the industrial process via a standard check valve. The thermal performance of this system is projected to produce about 3 million lbs of steam during an average weather year, which is approximately 3 billion Btu's. As with any prototype system, this steam system cannot be justified for purely economic reasons. It is estimated, however, that if the cost of the collectors can be reduced to a mass production level of $3 per lb then this type of system would be cost effective in about six years with the current government incentives and a fuel escalation rate of 10%. This period can be shortened by a combination of an increased investment tax credit and an accelerated depreciation.

Deffenbaugh, D.M.; Watkins, P.V.; Hugg, S.B.; Kulesz, J.J.; Decker, H.E.; Powell, R.C.

1979-06-29T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Will Model-based Definition replace engineering drawings throughout the product lifecycle? A global perspective from aerospace industry  

Science Conference Proceedings (OSTI)

The Model-based Definition (MBD) approach is gaining popularity in various industries. MBD represents a trend in Computer-aided Design (CAD) that promises reduced time-to-market and improved product quality. Its main goal is to improve and accelerate ... Keywords: CAD, Engineering drawing, MBD, Model-based Definition, Product lifecycle

Virgilio Quintana; Louis Rivest; Robert Pellerin; Frédérick Venne; Fawzi Kheddouci

2010-06-01T23:59:59.000Z

162

Recycling of the product of thermal inertization of cement-asbestos for various industrial applications  

SciTech Connect

Recycling of secondary raw materials is a priority of waste handling in the countries of the European community. A potentially important secondary raw material is the product of the thermal transformation of cement-asbestos, produced by prolonged annealing at 1200-1300 {sup o}C. The product is chemically comparable to a Mg-rich clinker. Previous work has assured the reliability of the transformation process. The current challenge is to find potential applications as secondary raw material. Recycling of thermally treated asbestos-containing material (named KRY.AS) in traditional ceramics has already been studied with successful results. The results presented here are the outcome of a long termed project started in 2005 and devoted to the recycling of this secondary raw materials in various industrial applications. KRY.AS can be added in medium-high percentages (10-40 wt%) to commercial mixtures for the production of clay bricks, rock-wool glasses for insulation as well as Ca-based frits and glass-ceramics for the production of ceramic tiles. The secondary raw material was also used for the synthesis of two ceramic pigments; a green uvarovite-based pigment [Ca{sub 3}Cr{sub 2}(SiO{sub 4}){sub 3}] and a pink malayaite-based pigment [Ca(Sn,Cr)SiO{sub 5}]. The latter is especially interesting as a substitute for cadmium-based pigments. This work also shows that KRY.AS can replace standard fillers in polypropylene plastics without altering the properties of the final product. For each application, a description and relevant results are presented and discussed.

Gualtieri, Alessandro F., E-mail: alessandro.gualtieri@unimore.it [Dipartimento di Scienze della Terra, Universita di Modena e R.E., Via S. Eufemia 19, I-41100 Modena (Italy); Giacobbe, Carlotta; Sardisco, Lorenza; Saraceno, Michele [Dipartimento di Scienze della Terra, Universita di Modena e R.E., Via S. Eufemia 19, I-41100 Modena (Italy); Lassinantti Gualtieri, Magdalena [Dipartimento Ingegneria dei Materiali e dell'Ambiente, Universita di Modena e Reggio Emilia, Via Vignolese 905/a, I-41100 Modena (Italy); Lusvardi, Gigliola [Dipartimento di Chimica, Universita degli Studi di Modena e Reggio Emilia, Via G. Campi 183, I-41100 Modena (Italy); Cavenati, Cinzia; Zanatto, Ivano [ZETADI S.r.l., Via dell'Artigianato 10, Ferno (Italy)

2011-01-15T23:59:59.000Z

163

Characteristics of spot-market rate indexes for truckload transportation  

E-Print Network (OSTI)

In the truckload transportation industry in the United States, a number of indexes are published that attempt to measure changes in rates, but no single index has emerged as an industry standard. Industry participants, ...

Bignell, Andrew (Andrew Souglas)

2013-01-01T23:59:59.000Z

164

Metal casting industry of the future: An integrated approach to delivering energy efficiency products and services  

SciTech Connect

The Industries of the Future process is driven by industry. Through technology roadmaps, industry participants set technology priorities, assess the progress of R and D, and ultimately lead the way in applying research results. This approach to private-public partnerships ensures the most strategic allocation possible of limited resources for the development of new technologies and the enhancement of industrial processes. Based on industry`s request, OIT`s role is to help facilitate the Industries of the Future strategy and to support the development and deployment of technologies that will shape the future of the metal casting industry. Part of this role is to encourage industry to undertake long-term, sector-wide technology planning and to selectively cost-share with OIT in collaborative R and D activities that match OIT`s mission. OIT metal casting research requires a dollar for dollar industry cost share.

1998-12-01T23:59:59.000Z

165

JOM Subject Index  

Science Conference Proceedings (OSTI)

Oct 1, 2009... assessment, industry analysis, and market and product forecast. It is also ... Market demand projections are developed together with its role in ...

166

Methane Digesters and Biogas Recovery - Masking the Environmental Consequences of Industrial Concentrated Livestock Production  

E-Print Network (OSTI)

Renewable Energy Production .Benefits and Renewable Energy Production One source ofauspicious source of renewable energy production from such

Di Camillo, Nicole G.

2011-01-01T23:59:59.000Z

167

Product strategy in response to technological innovation in the semiconductor test industry  

E-Print Network (OSTI)

After the market boom of 2000 in the semiconductor industry changed significantly. The changes included stricter limits on capital cost spending, and the increased propensity of the industry to outsource the manufacturing ...

Lin, Robert W. (Robert Wei-Pang), 1976-

2004-01-01T23:59:59.000Z

168

Biofuel Industries Group LLC | Open Energy Information  

Open Energy Info (EERE)

Industries Group LLC Industries Group LLC Jump to: navigation, search Name Biofuel Industries Group LLC Place Adrian, Michigan Zip 49221 Product Biofuel Industries Group, LLC owns and operates the NextDiesel biodiesel plant in Adrian, Michigan. References Biofuel Industries Group LLC[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Biofuel Industries Group LLC is a company located in Adrian, Michigan . References ↑ "Biofuel Industries Group LLC" Retrieved from "http://en.openei.org/w/index.php?title=Biofuel_Industries_Group_LLC&oldid=342814" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version

169

Clean Technology Sustainable Industries Organization | Open Energy  

Open Energy Info (EERE)

Sustainable Industries Organization Sustainable Industries Organization Jump to: navigation, search Name Clean Technology & Sustainable Industries Organization Place Royal Oak, Michigan Zip 48073 Product A non-profit membership industry organization formed to advance the global development and deployment of clean and sustainable technologies References Clean Technology & Sustainable Industries Organization[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Clean Technology & Sustainable Industries Organization is a company located in Royal Oak, Michigan . References ↑ "Clean Technology & Sustainable Industries Organization" Retrieved from "http://en.openei.org/w/index.php?title=Clean_Technology_Sustainable_Industries_Organization&oldid=343669"

170

Federal Register Vol. 76 No. 44, 12422-12505- Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment (March 7, 2011)  

Energy.gov (U.S. Department of Energy (DOE))

Federal Register Vol. 76 No. 44, 12422-12505 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment (March 7, 2011)....

171

Review of Cyclotron Production and Quality Control of High Specific Activity Radionuclides for Biomedical, Biological, Industrial and Environmental Applications at INFN-LASA  

E-Print Network (OSTI)

Review of Cyclotron Production and Quality Control of High Specific Activity Radionuclides for Biomedical, Biological, Industrial and Environmental Applications at INFN-LASA

Birattari, C; Groppi, F; Gini, L

2001-01-01T23:59:59.000Z

172

Melt index prediction using optimized least squares support vector machines based on hybrid particle swarm optimization algorithm  

Science Conference Proceedings (OSTI)

Melt index (MI) is considered as one of the most important variables of the quality, which determines the product specifications. Thus, a reliable estimation of MI is crucial in the quality control of the practical processes in the propylene polymerization ... Keywords: Ant colony optimization, Immune clone particle swarm optimization, Industrial polypropylene manufacture, Least squares support vector machines, Melt index prediction

Huaqin Jiang, Zhengbing Yan, Xinggao Liu

2013-11-01T23:59:59.000Z

173

WOSMIP II- Workshop on Signatures of Medical and Industrial Isotope Production  

Science Conference Proceedings (OSTI)

Medical and industrial fadioisotopes are fundamental tools used in science, medicine and industry with an ever expanding usage in medical practice where their availability is vital. Very sensitive environmental radionuclide monitoring networks have been developed for nuclear-security-related monitoring [particularly Comprehensive Test-Ban-Treaty (CTBT) compliance verification] and are now operational.

Matthews, Murray; Achim, Pascal; Auer, M.; Bell, Randy; Bowyer, Ted W.; Braekers, Damien; Bradley, Ed; Briyatmoko, Budi; Berglund, Helena; Camps, Johan; Carranza, Eduardo C.; Carty, Fitz; DeCaire, Richard; Deconninck, Benoit; DeGeer, Lars E.; Druce, Michael; Friese, Judah I.; Hague, Robert; Hoffman, Ian; Khrustalev, Kirill; Lucas, John C.; Mattassi, G.; Mattila, Aleski; Nava, Elisabetta; Nikkinin, Mika; Papastefanou, Constantin; Piefer, Gregory R.; Quintana, Eduardo; Ross, Ole; Rotty, Michel; Sabzian, Mohammad; Saey, Paul R.; Sameh, A. A.; Safari, M.; Schoppner, Michael; Siebert, Petra; Unger, Klaus K.; Vargas, Albert

2011-11-01T23:59:59.000Z

174

Solar production of industrial process steam at Ore-Ida frozen-fried-potato plant  

DOE Green Energy (OSTI)

TRW is designing a system for the demonstration of the Solar Production of Industrial Process Steam. Included, besides the Conceptual Design, is an Environmental Impact Assessment and a System Safety Analysis report. The system as proposed and conceptualized consists of an array of 9520 square feet of parabolic trough concentrating solar energy collectors which generate pressurized hot water. The pressurized water is allowed to flash to steam at 300 psi (417/sup 0/F) and fed directly into the high pressure steam lines of the Ore-Ida Foods, Inc., processing plant in Ontario, Oregon. Steam is normally generated in the factory by fossil-fired boilers and is used by means of a steam-to-oil heat exchanger for the process of frying potatoes in their frozen food processing line. The high pressure steam is also cascaded down to 125 psi for use in other food processing operations. This solar system will generate 2 x 10/sup 6/ Btu/hr during peak periods of insolation. Steam requirements in the plant for frying potatoes are: 43 x 10/sup 6/ Btu/hr at 300 psi and 52 x 10/sup 6/ Btu/hr at the lower temperatures and pressures. The Ontario plant operates on a 24 hr/day schedule six days a week during the potato processing campaigns and five days a week for the remainder of the year. The seventh day and sixth day, respectively, use steam for cleanup operations. An analysis of the steam generated, based on available annual insolation data and energy utilized in the plant, is included.

Cherne, J.M.; Gelb, G.H.; Pinkerton, J.D.; Paige, S.F.

1978-12-29T23:59:59.000Z

175

Establishment of an Industry-Driven Consortium Focused on Improving the Production Performance of Domestic Stripper Wells  

Science Conference Proceedings (OSTI)

The Pennsylvania State University, under contract to the U.S. Department of Energy, National Energy Technology Laboratory will establish, promote, and manage a national industry-driven Stripper Well Consortium (SWC) that will be focused on improving the production performance of domestic petroleum and/or natural gas stripper wells. The consortium creates a partnership with the U.S. petroleum and natural gas industries and trade associations, state funding agencies, academia, and the National Energy Technology Laboratory. This report serves as the sixth quarterly technical progress report for the SWC. Key activities for this reporting period included: (1) Organized and hosted two technology transfer meetings; (2) Collaborated with the Pennsylvania Oil and Gas Association (POGAM) to host a Natural Gas Outlook conference in Pittsburgh, PA; (3) Provided a SWC presentation at the Interstate Oil and Gas Compact Commission (IOGCC) meeting in Jackson Hole, WY; and (4) Completed and released a stripper well industry documentary entitled: ''Independent Oil: Rediscovering America's Forgotten Wells''.

Joel Morrison; Sharon Elder

2006-01-24T23:59:59.000Z

176

Sanyo Chemical Industries | Open Energy Information  

Open Energy Info (EERE)

Chemical Industries Chemical Industries Jump to: navigation, search Name Sanyo Chemical Industries Place Tokyo, Japan Zip 103-0023 Product String representation "Sanyo is a petr ... uction process." is too long. References Sanyo Chemical Industries[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Sanyo Chemical Industries is a company located in Tokyo, Japan . References ↑ "Sanyo Chemical Industries" Retrieved from "http://en.openei.org/w/index.php?title=Sanyo_Chemical_Industries&oldid=350614" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties

177

Solar Power Industries SPI | Open Energy Information  

Open Energy Info (EERE)

Solar Power Industries SPI Solar Power Industries SPI Jump to: navigation, search Name Solar Power Industries (SPI) Place Belle Vernon, Pennsylvania Zip 15012 Product US-based manufacturer of mono and multicrystalline PV cells, modules and systems. References Solar Power Industries (SPI)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Power Industries (SPI) is a company located in Belle Vernon, Pennsylvania . References ↑ "Solar Power Industries (SPI)" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Power_Industries_SPI&oldid=351318" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version

178

Methane Digesters and Biogas Recovery - Masking the Environmental Consequences of Industrial Concentrated Livestock Production  

E-Print Network (OSTI)

and animal production; and fossil fuel use in production andas a result of burning fossil fuels for production of feedcrops. 67 Fossil fuel burning and "land-use changes, which

Di Camillo, Nicole G.

2011-01-01T23:59:59.000Z

179

Supply chain management for fast-moving products in the electronic industry  

E-Print Network (OSTI)

The objective of this Thesis was to strategically redesign and transform the supply chain of a series of detonators in a leading Company serving the oil and gas industry. The scope of the Thesis included data gathering and ...

Zafiriou, Konstantinos F

2006-01-01T23:59:59.000Z

180

Program Highlights Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Highlights Index Program Highlights Index Disposal of Greater-than-Class C Low-Level Radioactive Waste Ecological Risk Assessment of Chemically and Radiologically Contaminated Federal Sites Energy Zone Planning Tool for the Eastern United States Environmental Site Characterization and Remediation at Former Grain Storage Sites Evaluation of Risks of Aquatic Nuisance Species Transfer via the Chicago Area Waterway System Formerly Utilized Sites Remedial Action Program (FUSRAP) Glen Canyon Dam Long-Term Experimental and Management Plan EIS Highly Enriched Uranium Transparency Program Management of Naturally Occurring Radioactive Material (NORM) Generated by the Petroleum Industry Mobile Climate Observatory for Atmospheric Aerosols in India Mobile Climate Observatory on the Pacific

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Nanjing Dalu Industry Investment Group | Open Energy Information  

Open Energy Info (EERE)

Dalu Industry Investment Group Dalu Industry Investment Group Jump to: navigation, search Name Nanjing Dalu Industry Investment Group Place Beijing Municipality, China Zip 100055 Sector Solar Product Chinese investment company with a focus on energy, telecommunications, finance, and biotechnology; involved with polysilicon production for the solar industry. References Nanjing Dalu Industry Investment Group[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Nanjing Dalu Industry Investment Group is a company located in Beijing Municipality, China . References ↑ "Nanjing Dalu Industry Investment Group" Retrieved from "http://en.openei.org/w/index.php?title=Nanjing_Dalu_Industry_Investment_Group&oldid=34900

182

BOC Lienhwa Industrial Gases BOCLH | Open Energy Information  

Open Energy Info (EERE)

BOC Lienhwa Industrial Gases BOCLH BOC Lienhwa Industrial Gases BOCLH Jump to: navigation, search Name BOC Lienhwa Industrial Gases (BOCLH) Place Taipei, Taiwan Sector Solar Product BOCLH is a joint venture between the Lien Hwa Industrial Corporation and the BOC Group in the United Kingdom and produces high-purity gases used in solar component production. References BOC Lienhwa Industrial Gases (BOCLH)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. BOC Lienhwa Industrial Gases (BOCLH) is a company located in Taipei, Taiwan . References ↑ "BOC Lienhwa Industrial Gases (BOCLH)" Retrieved from "http://en.openei.org/w/index.php?title=BOC_Lienhwa_Industrial_Gases_BOCLH&oldid=342956

183

An Exploratory Study of International Product Transfer and Production Ramp-Up in the Data Storage Industry  

E-Print Network (OSTI)

to considerable "yield fallout," i.e. products which failoutput. The biggest yield fallout occurred at two stations,are fewer sources of yield fallout remaining. Third, there

Christian Terwiesch; Kuong S. Chea; Roger E. Bohn

1999-01-01T23:59:59.000Z

184

Illinois mineral industry in 1984 and review of preliminary mineral production data for 1985. Illinois mineral notes  

SciTech Connect

The annual output and value of Illinois minerals extracted, processed, and manufactured into products in 1984 are summarized in the report. Materials used in manufacturing were not necessarily extracted within the state. Coal continued to be the leading commodity in terms of value; oil ranked second; stone and sand and gravel ranked third and fourth; fluorspar was fifth. Nationally, Illinois ranked eighteenth in value of nonfuel mineral production. It remained the principal U.S. producer of fluorspar, tripoli, and industrial sand and led in the manufacture of iron-oxide pigments. In stone and peat production, the state ranked fourth. Preliminary data for 1985 indicate that the value of minerals mined was $2,947.8 million, a decrease of 6.1 percent from the $3,138.0 million in 1984. Detailed production summaries and analyses--including maps, tables, and graphs--for all mineral commodities are based on data available for 1984.

Samson, I.E.; Bhagwat, S.B.

1986-01-01T23:59:59.000Z

185

Pricing and licensing of software products and services : a study on industry trends  

E-Print Network (OSTI)

The software product business reached the $150 billion mark at the end of 2005. The pricing and licensing of new products, maintenance services, services and service maintenance have become an important strategy to deliver ...

Nayak, Shivashis

2006-01-01T23:59:59.000Z

186

Green-IT: Green Initiative for Energy Efficient, Eco-products in the Construction Industry  

E-Print Network (OSTI)

GREEN-IT aims to introduce a product database [e2pilot] in the European building construction product sector and accelerate the EU market transformation towards regulated Energy Performance of Buildings.

Bhar, R.

2008-01-01T23:59:59.000Z

187

Agent-based collaborative product design engineering: an industrial case study  

Science Conference Proceedings (OSTI)

Globalization and rapid evolving of Internet and Web-based technologies have revolutionized the product development process. Engineering a product is a complex process involving the integration of distributed resources, such as human beings, engineering ... Keywords: collaboration, internet-aided design, product design engineering, software agents, workflow

Qi Hao; Weiming Shen; Zhan Zhang; Seong-Whan Park; Jai-Kyung Lee

2006-01-01T23:59:59.000Z

188

Agent-based collaborative product design engineering: An industrial case study  

Science Conference Proceedings (OSTI)

Globalization and rapid evolving of Internet and Web-based technologies have revolutionized the product development process. Engineering a product is a complex process involving the integration of distributed resources, such as human beings, engineering ... Keywords: Collaboration, Internet-aided design, Product design engineering, Software agents, Workflow

Qi Hao; Weiming Shen; Zhan Zhang; Seong-Whan Park; Jai-Kyung Lee

2006-01-01T23:59:59.000Z

189

Stumbling Toward Capitalism: The State, Global Production Networks, and the Unexpected Emergence of China's Independent Auto Industry  

E-Print Network (OSTI)

the Chinese Automobile Industry. ? Asia Pacific Journal ofof the Mexican Auto Industry. Princeton, NJ: Princeton2008. China Automotive Industry Yearbooks 2004, 2005, 2006,

Chang, Crystal Whai-ku

2011-01-01T23:59:59.000Z

190

Stumbling Toward Capitalism: The State, Global Production Networks, and the Unexpected Emergence of China's Independent Auto Industry  

E-Print Network (OSTI)

base for the global electric vehicle industry. Why is rapidThe second, the Electric Vehicle Industry Association, is aalliance, the Electric Vehicle Industry Association also

Chang, Crystal Whai-ku

2011-01-01T23:59:59.000Z

191

SUMMER-FALL 2011 SCHEDULE Workshops to Improve Industrial Productivity by  

E-Print Network (OSTI)

. It covers material in steam generation efficiency, steam distribution system losses, and resource. For complete course information: http://www.eere.energy.gov/industry/bestpractices/pumping_systems.html Steam System Assessment Many facilities can save energy through the installation of more efficient steam

192

CALENDAR YEARS 2012-3 SCHEDULE Workshops to Improve Industrial Productivity by  

E-Print Network (OSTI)

. It covers material in steam generation efficiency, steam distribution system losses, and resource. For complete course information: http://www.eere.energy.gov/industry/bestpractices/pumping_systems.html Steam System Assessment Many facilities can save energy through the installation of more efficient steam

193

Parallel Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Parallel Parallel Index and Query for Large Scale Data Analysis Jerry Chou Kesheng Wu Oliver Rübel Mark Howison Ji Qiang Prabhat Brian Austin E. Wes Bethel Rob D. Ryne Arie Shoshani ABSTRACT Modern scientific datasets present numerous data manage- ment and analysis challenges. State-of-the-art index and query technologies are critical for facilitating interactive ex- ploration of large datasets, but numerous challenges remain in terms of designing a system for processing general scien- tific datasets. The system needs to be able to run on dis- tributed multi-core platforms, efficiently utilize underlying I/O infrastructure, and scale to massive datasets. We present FastQuery, a novel software framework that address these challenges. FastQuery utilizes a state-of-the- art index and query technology (FastBit) and is designed to process massive datasets on modern supercomputing

194

Sponsors of CIEEDAC: Natural Resources Canada, Canadian Industry Program for Energy Conservation, Aluminium Industry Association, Canadian Petroleum Products Institute, Canadian Portland Cement Association, Canadian Pulp  

E-Print Network (OSTI)

2. Industrial Consumption of Energy, and the Quarterly Report of Energy Supply and Demand 3. Annual Canada (NRCan): 1. Annual Survey of Manufacturers (ASM, from STC) 2. Industrial Consumption of Energy consistent source of historical data related to energy consumption in all Canadian industry by region

195

Solar production of industrial process steam at the Home Cleaning and Laundry Co. Final technical report  

SciTech Connect

This report presents the results of the operation and performance evaluation period at the Home Laundry Solar Industrial Process Heat Project at Pasadena, California. The installation comprises 6496 ft/sup 2/ (603.5 m/sup 2/) of linear parabolic trough concentrating collectors supplying solar thermal energy for use in laundry and dry cleaning processes. The design phase began in September 1977, and an acceptance test was conducted during the week of April 12, 1982. The plant has been in operation since May 1982, with the 12-month Phase III (operational) period starting in October 1982. The objective of the operational evaluation experiment was to maximize energy delivery to the industrial participant while characterizing system performance. Data were acquired for monthly documentation of system performance, maintenance requirements, and operating costs.

1984-06-01T23:59:59.000Z

196

INDEXING MECHANISM  

DOE Patents (OSTI)

A device is presented for loading and unloading fuel elements containing material fissionable by neutrons of thermal energy. The device comprises a combination of mechanical features Including a base, a lever pivotally attached to the base, an Indexing plate on the base parallel to the plane of lever rotation and having a plurality of apertures, the apertures being disposed In rows, each aperture having a keyway, an Index pin movably disposed to the plane of lever rotation and having a plurality of apertures, the apertures being disposed in rows, each aperture having a keyway, an index pin movably disposed on the lever normal to the plane rotation, a key on the pin, a sleeve on the lever spaced from and parallel to the index pin, a pair of pulleys and a cable disposed between them, an open collar rotatably attached to the sleeve and linked to one of the pulleys, a pin extending from the collar, and a bearing movably mounted in the sleeve and having at least two longitudinal grooves in the outside surface.

Kock, L.J.

1959-09-22T23:59:59.000Z

197

Universal Scientific Industrial USI Group | Open Energy Information  

Open Energy Info (EERE)

Scientific Industrial USI Group Scientific Industrial USI Group Jump to: navigation, search Name Universal Scientific Industrial (USI Group) Place Taiwan Sector Services Product USI Group is a design and manufacturing services company that is venturing into polysilicon production. References Universal Scientific Industrial (USI Group)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Universal Scientific Industrial (USI Group) is a company located in Taiwan . References ↑ "Universal Scientific Industrial (USI Group)" Retrieved from "http://en.openei.org/w/index.php?title=Universal_Scientific_Industrial_USI_Group&oldid=352541" Categories: Clean Energy Organizations Companies

198

Digital production pipelines: examining structures and methods in the computer effects industry  

E-Print Network (OSTI)

Computer animated films require collaboration: blending artistic concept with technical skill, meeting budget constraints and adhering to deadlines. The path which production follows from initial idea to finished product is known as the pipeline. The purpose of this thesis is to collect, study and share information regarding production pipeline practices and to derive a conceptual definition. Research focused on selected companies in the United States which have produced at least one feature-length computer generated film and continue to produce them. The key finding of this thesis is a conceptual definition of digital production pipelines: A digital production pipeline must, by definition, utilize digital computing hardware and software to facilitate human work and collaboration for the overarching purpose of producing content for film. The digital production pipeline is not a structure, but rather a malleable set of components which can be arranged, configured, and adapted into new structures as needed. These malleable components are human groups with assigned task domains, and digital hardware and software systems. The human groups are normally referred to as departments or teams. The digital hardware and software systems are operating systems, software tools and applications, networks, processors, and storage. The digital production pipeline is the synergy of these two types of components into adaptable systems and structures.

Bettis, Dane Edward

2005-05-01T23:59:59.000Z

199

A cross-industry analysis and framework of aftermarket products and services  

E-Print Network (OSTI)

This thesis looks at how supply chains of Aftermarket Products and Services are structured. The study includes an overall examination of the Aftermarket Function, as well as an overview and examination of Aftermarket Supply ...

Englezos, Petros

2006-01-01T23:59:59.000Z

200

A method for determining the environmental footprint of industrial products using simulation  

Science Conference Proceedings (OSTI)

Effective assessment and communication of the environmental footprint is increasingly important to process development and marketing purposes. Traditionally, static methods have been applied to analyze the environmental impact during a product's life ...

Erik Lindskog; Linus Lundh; Jonatan Berglund; Y. Tina Lee; Anders Skoogh; Björn Johansson

2011-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Evaluación y selección de microorganismos para la producción de etanol a nivel industrial = Evaluation and selection of microorganisms for ethanol production at industrial level.  

E-Print Network (OSTI)

??Mariscal Moreno, Juan Pablo (2011) Evaluación y selección de microorganismos para la producción de etanol a nivel industrial = Evaluation and selection of microorganisms for… (more)

Mariscal Moreno, Juan Pablo

2011-01-01T23:59:59.000Z

202

ESTABLISHMENT OF AN INDUSTRY-DRIVEN CONSORTIUM FOCUSED ON IMPROVING THE PRODUCTION PERFORMANCE OF DOMESTIC STRIPPER WELLS  

SciTech Connect

The Pennsylvania State University, under contract to the US Department of Energy, National Energy Technology Laboratory will establish, promote, and manage a national industry-driven Stripper Well Consortium (SWC) that will be focused on improving the production performance of domestic petroleum and/or natural gas stripper wells. the consortium creates a partnership with the US petroleum and natural gas industries and trade associations, state funding agencies, academia, and the National Energy Technology Laboratory. This report serves as the third quarterly technical progress report for the SWC. During this reporting period the SWC entered into a co-funding arrangement with the New York State Energy Development Authority (NYSERDA) to provide an additional $100,000 in co-funding for stripper well production-orientated projects.The SWC hosted its first meeting in which members proposed research projects to the SWC membership. The meeting was held on April 9-10, 2001 in State College, Pennsylvania. Twenty three proposals were submitted to the SWC for funding consideration. Investigators of the proposed projects provided the SWC membership with a 20 minute (15 minute technical discussion, 5 minute question and answer session) presentation. Of the 23 proposals, the Executive Council approved $921,000 in funding for 13 projects. Penn State then immediately started the process of issuing subcontracts to the various projects approved for funding.

Joel L. Morrison

2001-09-12T23:59:59.000Z

203

ALPHABETICAL INDEX | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ALPHABETICAL INDEX ALPHABETICAL INDEX ALPHABETICAL INDEX More Documents & Publications INDEX Index2.doc State Awards for Energy Emergency Preparation...

204

Industrial experience with building a web portal product line using a lightweight, reactive approach  

Science Conference Proceedings (OSTI)

Imprecise, frequently changing requirements and short time-to-market create challenges for application of conventional software methods in Web Portal engineering. To address these challenges, ST Electronics (Info-Software Systems) Pte. Ltd. applied a ... Keywords: maintenance, program synthesis, reuse, software product lines, static meta-programming, web engineering

Ulf Pettersson; Stan Jarzabek

2005-09-01T23:59:59.000Z

205

Economic Impacts of Expanded Woody Biomass Utilization on the Bioenergy and Forest Products Industries in Florida  

E-Print Network (OSTI)

and decentralised production of electricity, heat and cooling, and biofuels, thus supporting the diversification demonstrated impact, involving multipliers such as associations of manufacturers, wholesalers, retailers to biofuels are expected to support the implementation of the RES Directive and the proposed revised Fuel

Florida, University of

206

Agent Technologies for Virtual Enterprises in the One-of-a-Kind-Production Industry  

Science Conference Proceedings (OSTI)

One-of-a-kind-products (OKP) virtual enterprises are highly individualized and perform unique projects. Structural and behavioral modeling are important aspects of the use of agents to support their information systems. This paper discusses business ... Keywords: Software Agent Provider, Virtual Enterprises

Jeroen W.J. Gijsen; Nicholas B. Szirbik; Gerd Wagner

2002-10-01T23:59:59.000Z

207

ALPHABETICAL INDEX  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Page of 4 ALPHABETICAL INDEX Key Word Chapter Number 8(a) Direct Awards 12 Advance Understandings 7, 3 Affirmative Action 12 Allocable Costs 7 Allowable Costs 7 Anti Kickback Act 8 Aviation Management 11 Balanced Scorecard 5, 10 Bankruptcy 7 Bonds and Insurance 7, 3 Business Management Oversight Process 5 Buy American Act 8 Changes 8 Claims 8 Collective Bargaining 3 Commercial Bill of Lading 11 Conditional Payment of Fee, Profit Or Incentives 2, 5 Consultants 10 Contract Administration Plan 5 Key Word Chapter Number Contract Work Hours and Safety Standards Act 3 Contracting Officer Representative 5 Contractor Human Resources 3 Contractor Performance 5 Contractor Purchasing System 10

208

Ecological Dynamics of De Novo and De Alio Products in the Worldwide Optical Disk Drive Industry, 1983-1999  

E-Print Network (OSTI)

Given the extreme capital intensity of optical disk drivethe industries with low capital intensity or industries withof high and low capital intensity (Freeman & Soete, 1999),

Olga M. Khessina; Glenn R. Carroll

2001-01-01T23:59:59.000Z

209

India’s Iron and Steel Industry: Productivity, Energy Efficiency and Carbon Emissions  

E-Print Network (OSTI)

This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or The Regents of the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof, or The Regents of the University of California.

Ernest Orlando Lawrence; Katja Schumacher; Jayant Sathaye; Katja Schumacher; Jayant Sathaye

1998-01-01T23:59:59.000Z

210

The Copper Industry  

Science Conference Proceedings (OSTI)

...These products are sold to a wide variety of industrial users. Certain mill productsâ??chiefly wire, cable, and most

211

Ardour Global Indexes LLC | Open Energy Information  

Open Energy Info (EERE)

Zip 10016 Product New-York based company that manages the Ardour Global Indexes, a set of alternative energy financial indicators. References Ardour Global Indexes LLC1 LinkedIn...

212

COMPOSITE INDEX OF HANFORD ENGINEERING STANDARDS  

SciTech Connect

Hanford Atomic Production Operation composite index refers to subjects contained in the nine handbooks and manuals published under the Hanford Engineering Standard Program. This index is described in TID-4100(Suppl.). (N.W.R.)

1963-01-01T23:59:59.000Z

213

GreenShift Industrial Design Corporation GIDC | Open Energy Information  

Open Energy Info (EERE)

Industrial Design Corporation GIDC Industrial Design Corporation GIDC Jump to: navigation, search Name GreenShift Industrial Design Corporation (GIDC) Place Mount Arlington, New Jersey Zip NJ 07856 Product Focused on the engineering and marketing of green innovations and processes that enhance manufacturing efficiencies, improve resource utilization and minimize waste. References GreenShift Industrial Design Corporation (GIDC)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. GreenShift Industrial Design Corporation (GIDC) is a company located in Mount Arlington, New Jersey . References ↑ "GreenShift Industrial Design Corporation (GIDC)" Retrieved from "http://en.openei.org/w/index.php?title=GreenShift_Industrial_Design_Corporation_GIDC&oldid=346110"

214

Mulk Renewable Energy Aditya Solar Power Industries JV | Open Energy  

Open Energy Info (EERE)

Mulk Renewable Energy Aditya Solar Power Industries JV Mulk Renewable Energy Aditya Solar Power Industries JV Jump to: navigation, search Name Mulk Renewable Energy & Aditya Solar Power Industries JV Place United Arab Emirates Sector Solar Product UAE-based company that is developing a 200MW solar thermal plant in Sharjah. References Mulk Renewable Energy & Aditya Solar Power Industries JV[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Mulk Renewable Energy & Aditya Solar Power Industries JV is a company located in United Arab Emirates . References ↑ "Mulk Renewable Energy & Aditya Solar Power Industries JV" Retrieved from "http://en.openei.org/w/index.php?title=Mulk_Renewable_Energy_Aditya_Solar_Power_Industries_JV&oldid=348970"

215

Solar Energy LLC Industrial Investors Group | Open Energy Information  

Open Energy Info (EERE)

LLC Industrial Investors Group LLC Industrial Investors Group Jump to: navigation, search Name Solar Energy LLC - Industrial Investors Group Place Moscow, Russian Federation Zip 119017 Sector Solar Product The company Solar Energy plans to use turnkey equipment from GT Solar and others to make silicon, ingots, wafers and cells in Russia. References Solar Energy LLC - Industrial Investors Group[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Energy LLC - Industrial Investors Group is a company located in Moscow, Russian Federation . References ↑ "Solar Energy LLC - Industrial Investors Group" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Energy_LLC_Industrial_Investors_Group&oldid=351271

216

Sumitomo Metal Industries Ltd Sumitomo Metals | Open Energy Information  

Open Energy Info (EERE)

Sumitomo Metal Industries Ltd Sumitomo Metals Sumitomo Metal Industries Ltd Sumitomo Metals Jump to: navigation, search Name Sumitomo Metal Industries Ltd (Sumitomo Metals) Place Osaka-shi, Osaka, Japan Zip 540-0041 Sector Solar Product Engaged in the steel, engineering, and electronics businesses; works on fuel cell component technology and manufactures silicon wafers for the solar sector. References Sumitomo Metal Industries Ltd (Sumitomo Metals)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Sumitomo Metal Industries Ltd (Sumitomo Metals) is a company located in Osaka-shi, Osaka, Japan . References ↑ "Sumitomo Metal Industries Ltd (Sumitomo Metals)" Retrieved from "http://en.openei.org/w/index.php?title=Sumitomo_Metal_Industries_Ltd_Sumitomo_Metals&oldid=351744"

217

Agropecuaria e Industrial Serra Grande | Open Energy Information  

Open Energy Info (EERE)

Agropecuaria e Industrial Serra Grande Agropecuaria e Industrial Serra Grande Jump to: navigation, search Name Agropecuaria e Industrial Serra Grande Place São Raimundo das Mangabeiras, Maranhao, Brazil Product Privately owned Brazil based ethanol producer, located in the state of Maranhao. References Agropecuaria e Industrial Serra Grande[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Agropecuaria e Industrial Serra Grande is a company located in São Raimundo das Mangabeiras, Maranhao, Brazil . References ↑ "[ Agropecuaria e Industrial Serra Grande]" Retrieved from "http://en.openei.org/w/index.php?title=Agropecuaria_e_Industrial_Serra_Grande&oldid=341914" Categories:

218

Henan Yinge Industrial Investment Corporation | Open Energy Information  

Open Energy Info (EERE)

Henan Yinge Industrial Investment Corporation Henan Yinge Industrial Investment Corporation Jump to: navigation, search Name Henan Yinge Industrial Investment Corporation Place Henan Province, China Sector Biomass Product Henan-based biomass project developer. References Henan Yinge Industrial Investment Corporation[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Henan Yinge Industrial Investment Corporation is a company located in Henan Province, China . References ↑ "Henan Yinge Industrial Investment Corporation" Retrieved from "http://en.openei.org/w/index.php?title=Henan_Yinge_Industrial_Investment_Corporation&oldid=346484" Categories: Clean Energy Organizations Companies Organizations

219

US Solar Energy Industries Association SEIA | Open Energy Information  

Open Energy Info (EERE)

Energy Industries Association SEIA Energy Industries Association SEIA Jump to: navigation, search Name US Solar Energy Industries Association (SEIA) Place Washington, Washington, DC Zip 20005 Sector Solar Product US national trade association of solar energy manufacturers, dealers, distributors, consultants, and marketers. References US Solar Energy Industries Association (SEIA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. US Solar Energy Industries Association (SEIA) is a company located in Washington, Washington, DC . References ↑ "US Solar Energy Industries Association (SEIA)" Retrieved from "http://en.openei.org/w/index.php?title=US_Solar_Energy_Industries_Association_SEIA&oldid=352621

220

Nahar Industrial Enterprises Limited NIEL | Open Energy Information  

Open Energy Info (EERE)

Nahar Industrial Enterprises Limited NIEL Nahar Industrial Enterprises Limited NIEL Jump to: navigation, search Name Nahar Industrial Enterprises Limited (NIEL) Place Punjab, India Zip 140506 Sector Biomass Product Punjab-based , textile mill and biomass project developers. References Nahar Industrial Enterprises Limited (NIEL)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Nahar Industrial Enterprises Limited (NIEL) is a company located in Punjab, India . References ↑ "Nahar Industrial Enterprises Limited (NIEL)" Retrieved from "http://en.openei.org/w/index.php?title=Nahar_Industrial_Enterprises_Limited_NIEL&oldid=348994" Categories: Clean Energy Organizations Companies Organizations

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Battery Park Industries Inc formerly Moltech Power Systems Inc | Open  

Open Energy Info (EERE)

Battery Park Industries Inc formerly Moltech Power Systems Inc Battery Park Industries Inc formerly Moltech Power Systems Inc Jump to: navigation, search Name Battery Park Industries Inc (formerly Moltech Power Systems, Inc) Place Gainesville, Florida Product Bundled rechargeable battery manufacturing assets of Moltech Power Systems, following that company's bankruptcy. References Battery Park Industries Inc (formerly Moltech Power Systems, Inc)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Battery Park Industries Inc (formerly Moltech Power Systems, Inc) is a company located in Gainesville, Florida . References ↑ "Battery Park Industries Inc (formerly Moltech Power Systems, Inc)" Retrieved from "http://en.openei.org/w/index.php?title=Battery_Park_Industries_Inc_formerly_Moltech_Power_Systems_Inc&oldid=342547"

222

Industry AP-913 Capabilities Database Version 1.0 on CD-ROM  

Science Conference Proceedings (OSTI)

The Industry AP-913 Capabilities Database provides users with a searchable index of EPRI and industry documents relating to the implementation of the AP-913 Equipment Reliability Process promulgated by the Institute of Nuclear Power Operations (INPO). The database contains a comprehensive list of industry documents that relate to the AP-913 Equipment Reliability Process . The products are mapped to the six major areas of AP-913 (Process Instructions) and to the activity elements within each of the major ...

2003-07-14T23:59:59.000Z

223

UPI: A Primary Index for Uncertain Databases  

E-Print Network (OSTI)

Uncertain data management has received growing attention from industry and academia. Many efforts have been made to optimize uncertain databases, including the development of special index data structures. However, none ...

Kimura, Hideaki

224

Normative price for a manufactured product: the SAMICS methodology. Volume II. Analysis. JPL publication 78-98. [Solar Array Manufacturing Industry Costing Standards  

DOE Green Energy (OSTI)

The Solar Array Manufacturing Industry Costing Standards (SAMICS) provide standard formats, data, assumptions, and procedures for determining the price a hypothetical solar array manufacturer would have to be able to obtain in the market to realize a specified after-tax rate of return on equity for a specified level of production. This document presents the methodology and its theoretical background. It is contended that the model is sufficiently general to be used in any production-line manufacturing environment. Implementation of this methodology by the Solar Array Manufacturing Industry Simulation computer program (SAMIS III, Release 1) is discussed.

Chamberlain, R.G.

1979-01-15T23:59:59.000Z

225

Analysis of relative industrial performance and it's implications for gas demand  

SciTech Connect

The analysis of the U.S. manufacturing sector and the opportunities it presents to the natural gas industry uses a weighted index of 11 economic/financial/market indicators to evaluate the performance of over 300 industries. Output and investment growth appear to be key determinants of industrial energy demand. Industries with high growth and investment potential over the period 1983-1993 are plastic materials and resins, aluminum rolling and drawing, motor vehicle parts, and glass products. Organic chemicals and paper mills exhibit above average potential, while petroleum refining, sugar, and primary aluminum are deemed slow growing industries.

Feldman, S.J.; Rogers, G.

1984-07-01T23:59:59.000Z

226

PNNL: Site index  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Index Site Index # A B C D E F G H I J K L M N O P Q R S T U V W X Y Z # # 3-D Body Holographic Scanner # A B C D E F G H I J K L M N O P Q R S T U V W X Y Z A Alerts - PNNL Staff Information Applied Geology and Geochemistry Applied Process Engineering Laboratory Asymmetric Resilient Cybersecurity (External website) Atmospheric Radiation Measurement (ARM) Program Atmospheric Sciences & Global Change Division Available Technologies Awards Awards - Science and Engineering External Recognition (SEER) Program # A B C D E F G H I J K L M N O P Q R S T U V W X Y Z B Battelle Corporate Contributions Battelle Memorial Institute Battelle Offices (addresses) Benefits (Insurance Forms, Savings Plan) Bio-Based Product Research at PNNL Biological & Environmental Research-Proteomics

227

Exhibitor: SAINT GOBAIN INDUSTRIAL CERAMICS NORTON ...  

Science Conference Proceedings (OSTI)

SAINT GOBAIN INDUSTRIAL CERAMICS NORTON PRIMARY METALS ... Norton refractory products for the copper industry include shaft furnace liners, bricks, ...

228

Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment, Published March 7, 2011.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VerDate Mar2010 18:04 Mar 04, 2011 VerDate Mar<15>2010 18:04 Mar 04, 2011 Jkt 223001 PO 00000 Frm 00001 Fmt 4717 Sfmt 4717 E:\FR\FM\07MRR2.SGM 07MRR2 mstockstill on DSKH9S0YB1PROD with RULES2 Vol. 76 Monday, No. 44 March 7, 2011 Part II Department of Energy 10 CFR Parts 429, 430 and 431 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment; Final Rule VerDate Mar2010 18:04 Mar 04, 2011 Jkt 223001 PO 00000 Frm 00002 Fmt 4701 Sfmt 4700 E:\FR\FM\07MRR2.SGM 07MRR2 mstockstill on DSKH9S0YB1PROD with RULES2 12422 Federal Register / Vol. 76, No. 44 / Monday, March 7, 2011 / Rules and Regulations DEPARTMENT OF ENERGY 10 CFR Parts 429, 430 and 431 [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program:

229

EIA Electric Industry Data Collection  

U.S. Energy Information Administration (EIA)

Steam Production EIA Electric Industry Data Collection Residential Industrial ... Monthly data on cost and quality of fuels delivered to cost-of-service plants

230

Partial Oxidation Gas Turbine for Power and Hydrogen Co-Production from Coal-Derived Fuel in Industrial Applications  

SciTech Connect

The report presents a feasibility study of a new type of gas turbine. A partial oxidation gas turbine (POGT) shows potential for really high efficiency power generation and ultra low emissions. There are two main features that distinguish a POGT from a conventional gas turbine. These are associated with the design arrangement and the thermodynamic processes used in operation. A primary design difference of the POGT is utilization of a non?catalytic partial oxidation reactor (POR) in place of a conventional combustor. Another important distinction is that a much smaller compressor is required, one that typically supplies less than half of the air flow required in a conventional gas turbine. From an operational and thermodynamic point of view a key distinguishing feature is that the working fluid, fuel gas provided by the OR, has a much higher specific heat than lean combustion products and more energy per unit mass of fluid can be extracted by the POGT expander than in the conventional systems. The POGT exhaust stream contains unreacted fuel that can be combusted in different bottoming ycle or used as syngas for hydrogen or other chemicals production. POGT studies include feasibility design for conversion a conventional turbine to POGT duty, and system analyses of POGT based units for production of power solely, and combined production of power and yngas/hydrogen for different applications. Retrofit design study was completed for three engines, SGT 800, SGT 400, and SGT 100, and includes: replacing the combustor with the POR, compressor downsizing for about 50% design flow rate, generator replacement with 60 90% ower output increase, and overall unit integration, and extensive testing. POGT performances for four turbines with power output up to 350 MW in POGT mode were calculated. With a POGT as the topping cycle for power generation systems, the power output from the POGT ould be increased up to 90% compared to conventional engine keeping hot section temperatures, pressures, and volumetric flows practically identical. In POGT mode, the turbine specific power (turbine net power per lb mass flow from expander exhaust) is twice the value of the onventional turbine. POGT based IGCC plant conceptual design was developed and major components have been identified. Fuel flexible fluid bed gasifier, and novel POGT unit are the key components of the 100 MW IGCC plant for co producing electricity, hydrogen and/or yngas. Plant performances were calculated for bituminous coal and oxygen blown versions. Various POGT based, natural gas fueled systems for production of electricity only, coproduction of electricity and hydrogen, and co production of electricity and syngas for gas to liquid and hemical processes were developed and evaluated. Performance calculations for several versions of these systems were conducted. 64.6 % LHV efficiency for fuel to electricity in combined cycle was achieved. Such a high efficiency arise from using of syngas from POGT exhaust s a fuel that can provide required temperature level for superheated steam generation in HRSG, as well as combustion air preheating. Studies of POGT materials and combustion instabilities in POR were conducted and results reported. Preliminary market assessment was performed, and recommendations for POGT systems applications in oil industry were defined. POGT technology is ready to proceed to the engineering prototype stage, which is recommended.

Joseph Rabovitser

2009-06-30T23:59:59.000Z

231

Final Technical Report - High-Performance, Oxide-Dispersion-Strengthened Tubes for Production of Ethylene adn Other Industrial Chemicals  

SciTech Connect

This project was undertaken by Michigan Technological University and Special Metals Corporation to develop creep-resistant, coking-resistant oxide-dispersion-strengthened (ODS) tubes for use in industrial-scale ethylene pyrolysis and steam methane reforming operations. Ethylene pyrolysis tubes are exposed to some of the most severe service conditions for metallic materials found anywhere in the chemical process industries, including elevated temperatures, oxidizing atmospheres and high carbon potentials. During service, hard deposits of carbon (coke) build up on the inner wall of the tube, reducing heat transfer and restricting the flow of the hydrocarbon feedstocks. About every 20 to 60 days, the reactor must be taken off-line and decoked by burning out the accumulated carbon. This decoking costs on the order of $9 million per year per ethylene plant, accelerates tube degradation, and requires that tubes be replaced about every 5 years. The technology developed under this program seeks to reduce the energy and economic cost of coking by creating novel bimetallic tubes offering a combination of improved coking resistance, creep resistance and fabricability not available in current single-alloy tubes. The inner core of this tube consists of Incoloy(R) MA956, a commercial ferritic Fe-Cr-Al alloy offering a 50% reduction in coke buildup combined with improved carburization resistance. The outer sheath consists of a new material - oxide dispersion strengthened (ODS) Alloy 803(R) developed under the program. This new alloy retains the good fireside environmental resistance of Alloy 803, a commercial wrought alloy currently used for ethylene production, and provides an austenitic casing to alleviate the inherently-limited fabricability of the ferritic Incoloy(R) MA956 core. To provide mechanical compatibility between the two alloys and maximize creep resistance of the bimetallic tube, both the inner Incoloy(R) MA956 and the outer ODS Alloy 803 are oxide dispersion strengthened materials produced using mechanical alloying technology. To minimize cost, the bimetallic tube is produced by direct powder co-extrusion. This technology has potential for domestic energy savings of up to 4.1 trillion BTU/year (4.3 x 1015J/year) and a reduction of 370,000 tons (340,000 tonnes) of CO2 emissions in short-residence-time ethylene furnaces. This represents an energy savings and CO2 emissions reduction of about 3.3%. If the technology is also applied to other types of ethylene pyrolysis furnaces, total energy savings and CO2 emissions reductions could increase by up to five times. The work involved: Developing powder and consolidation processing protocols to produce an oxide-dispersion strengthened variant of Alloy 803 exhibiting creep strength comparable to Incoloy? Alloy MA956, Developing a direct powder co-extrusion protocol for fabricating co-extruded bimetallic Incoloy? Alloy MA956 / ODS Alloy 803 tubes, Characterizing the properties of the ODS Alloy 803 material, the welding characteristics of the bimetallic tubes, and the coking characteristics of the Incoloy? MA956 alloy, and Documenting the potential energy savings and user requirements for these bimetallic pyrolysis furnace tubes. The project demonstrated that oxide dispersion strengthened Alloy 803 can be produced successfully using conventional mechanical alloying technology. The oxide dispersion strengthened bimetallic radiant coil technology explored under this program has significant potential for energy savings and productivity improvements for domestic ethylene producers. In today's competitive market, however, domestic furnace manufacturers and ethylene producers appear reluctant to pay any cost premium for higher-performance coil materials offering either higher temperature capabilities or longer service life. Interest in oxide dispersion strengthened radiant coils is likely to increase if furnace and ethylene producers begin to focus more on increasing tube wall temperatures to improve productivity.

McKimpson, Marvin G.

2006-04-06T23:59:59.000Z

232

Egypt National Cleaner Production Center (ENCPC) | Open Energy Information  

Open Energy Info (EERE)

National Cleaner Production Center (ENCPC) National Cleaner Production Center (ENCPC) Jump to: navigation, search Name Egypt National Cleaner Production Center (ENCPC) Agency/Company /Organization United Nations Industrial Development Organization, Egypt Ministry of Trade and Industry (MTI) Sector Energy Focus Area Industry Topics Background analysis Website http://www.unido.org/index.php Country Egypt Northern Africa References Egypt National Cleaner Production Center (ENCPC)[1] "The Egypt National Cleaner Production Center (ENCPC) is a joint initiative between the Ministry of Trade and Industry (MTI) and UNIDO. It is an integral part of the ministry network of Technology Transfer and Innovation Centers (ETTIC) supporting the modernization of Egyptian industry, and covering 10 industrial sectors. The ENCPC operates as a horizontal,

233

DLMF: Index W  

Science Conference Proceedings (OSTI)

... About the Project. NIST. IndexIndex VIndex Z. Index W. ?A?B?C?D?E?F?G? H?I?J?K?L?M?N?O?P?Q?R?S?T?U?V?W?Z?. Waring's problem: ...

2013-05-03T23:59:59.000Z

234

Climate VISION: Industry Associations  

Office of Scientific and Technical Information (OSTI)

Industry Associations Industry Associations Aluminum Aluminum Association (Coordinating aluminum industry Climate VISION activities) The Aluminum Association, Inc. is the trade association for producers of primary aluminum, recyclers and semi-fabricated aluminum products, as well as suppliers to the industry. The Association provides leadership to the industry through its programs and services which aim to enhance aluminum's position in a world of proliferating materials, increase its use as the "material of choice," remove impediments to its fullest use, and assist in achieving the industry's environmental, societal, and economic objectives. Automobile Manufacturers Alliance of Automobile Manufacturers (Coordinating automobile industry Climate VISION activities) The Alliance of Automobile Manufacturers, Inc. is a trade association

235

An Industrial-Based Consortium to Develop Premium Carbon Products from Coal, Annual Progress Report, October 1, 2003 through September 30, 2004  

SciTech Connect

Since 1998, The Pennsylvania State University (PSU) has been successfully operating the Consortium for Premium Carbon Products from Coal (CPCPC), which is a vehicle for industry-driven research on the promotion, development, and transfer of innovative technology on premium carbon produces from coal to the U.S. industry. The CPCPC is an initiative being led by PSU, its co-charter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provides the base funding for the program, with PSU responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity has continued under the present cooperative agreement, No. DE-FC26-03NT41874, which started October 1, 2003. The objective of the second agreement is to continue the successful operation of the CPCPC. The CPCPC has enjoyed tremendous success with its organizational structure, that includes PSU and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC is its industry-led council that selects proposals submitted by CPCPC members to ensure CPCPC target areas have strong industrial support. A second contract was executed with DOE NETL starting in October 2003 to continue the activities of CPCPC. An annual funding meeting was held in October 2003 and the council selected 10 projects for funding. Base funding for the projects is provided by NETL with matching funds from industry. Subcontracts were let from Penn State to the various subcontractors on March 1, 2004.

Andresen, John; Schobert, Harold; Miller, Bruce G

2006-03-01T23:59:59.000Z

236

Innovation and the state : development strategies for high technology industries in a world of fragmented production : Israel, Ireland, and Taiwan  

E-Print Network (OSTI)

One of the most unexpected changes of the 1990s is that firms in a number of emerging economies not previously known for their high-technology industries have leapfrogged to the forefront in new Information Technologies ...

Breznitz, Dan

2005-01-01T23:59:59.000Z

237

Specifications to Improve Power Quality Immunity in Electronic Systems for Industrial Applications -- A Downloadable Web Product: Su ggestions for Higher Quality and Lower Cost Production  

Science Conference Proceedings (OSTI)

To help improve power quality performance in electronic process equipment, this technical progress report is made available to users for download in PDF (192K). Key power quality issues are presented to provide a systematic approach to integrating electronic equipment into the industrial environment. As with the traditional hardcopy version (1000693), the goal is to provide suggestions for a specification language that will allow end-users to integrate electronic industrial equipment with the existing el...

2000-12-21T23:59:59.000Z

238

Nucleic acid indexing  

DOE Patents (OSTI)

A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

Guilfoyle, Richard A. (Madison, WI); Guo, Zhen (Bellevue, WA)

1999-01-01T23:59:59.000Z

239

Nucleic acid indexing  

DOE Patents (OSTI)

A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

Guilfoyle, Richard A. (Madison, WI); Guo, Zhen (Bellevue, WA)

2001-01-01T23:59:59.000Z

240

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Mapping the Micro-Foundations of Informational Development: Linking Software Processes, Products and Industries to Global Trends  

E-Print Network (OSTI)

software’s evolution and social impact. III. “Engineering”its uniqueness, its social impact through products and

Eischen, Kyle

2002-01-01T23:59:59.000Z

242

Electrical Energy Conservation Analyses of the Wood Products (SIC24) Industry in the BPA Service Sistrict : Mill Summary Report : Champion International Corporation, Roseburg, Oregon.  

Science Conference Proceedings (OSTI)

This report presents the partial results of a study conducted by Trans Energy Systems Industrial Division of URS Company for the Bonneville Power Administration (BPA) under contract AC79-84BP18946. The objective of this effort was an electrical energy conservation analysis of the Wood Products Industry (Standard Industrial Code (SIC) 24) in the BPA service district. The analysis was conducted by selecting five representative mills in the BPA service area and performing electrical energy conservation surveys and analyses of these mills. This report presents the results of data gathering and analysis at the Champion International Corporation plywood mill in Roseburg, Oregon, which produces exterior, interior, sanded and tongue and groove/shiplap softwood plywood. The plant produces 170 million square feet of 3/8-inch basis plywood annually. Species processed include Douglas fir and hemlock. This report summarizes the mill data collected, the technical and economic analyses performed, the strategy used in ranking the individual electrical energy conservation opportunities found in each mill, the recommended energy conservation measures (ECM), the projected cost benefits of each ECM and the estimated impacts of each ECM on plant production and operation.

TransEnergy Systems, Inc.

1985-01-01T23:59:59.000Z

243

Industrial alliances  

Science Conference Proceedings (OSTI)

The United States is emerging from the Cold War era into an exciting, but challenging future. Improving the economic competitiveness of our Nation is essential both for improving the quality of life in the United States and maintaining a strong national security. The research and technical skills used to maintain a leading edge in defense and energy now should be used to help meet the challenge of maintaining, regaining, and establishing US leadership in industrial technologies. Companies recognize that success in the world marketplace depends on products that are at the leading edge of technology, with competitive cost, quality, and performance. Los Alamos National Laboratory and its Industrial Partnership Center (IPC) has the strategic goal to make a strong contribution to the nation`s economic competitiveness by leveraging the government`s investment at the Laboratory: personnel, infrastructure, and technological expertise.

Adams, K.V.

1993-09-13T23:59:59.000Z

244

An Industrial-Based Consortium to Develop Premium Carbon Products from Coal, Annual Progress Report, October 1, 2004 through September 30, 2005  

SciTech Connect

Since 1998, The Pennsylvania State University (PSU) has been successfully operating the Consortium for Premium Carbon Products from Coal (CPCPC), which is a vehicle for industry-driven research on the promotion, development, and transfer of innovative technology on premium carbon produces from coal to the U.S. industry. The CPCPC is an initiative being led by PSU, its co-charter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provides the base funding for the program, with PSU responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity has continued under the present cooperative agreement, No. DE-FC26-03NT41874, which started October 1, 2003. The objective of the second agreement is to continue the successful operation of the CPCPC. The CPCPC has enjoyed tremendous success with its organizational structure, that includes PSU and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC is its industry-led council that selects proposals submitted by CPCPC members to ensure CPCPC target areas have strong industrial support. A second contract was executed with DOE NETL starting in October 2003 to continue the activities of CPCPC. An annual funding meeting was held in October 2003 and the council selected ten projects for funding. Base funding for the projects is provided by NETL with matching funds from industry. Subcontracts were let from Penn State to the subcontractors on March 1, 2004. Nine of the ten projects have been completed and the final reports for these 2004 projects are attached. An annual funding meeting was held in November 2004 and the council selected eleven projects for funding. Subcontracts were let from Penn State to the subcontractors on March 1, 2005. Three additional projects were selected for funding during the April 2005 tutorial/funding meeting. Subcontracts were let from Penn State to the subcontractors on July 1, 2005.

Miller, Bruce G

2006-03-01T23:59:59.000Z

245

An Industrial-Based Consortium to Develop Premium Carbon Products from Coal, Annual Progress Report, October 1, 2005 through September 30, 2006  

Science Conference Proceedings (OSTI)

Since 1998, The Pennsylvania State University has been successfully managing the Consortium for Premium Carbon Products from Coal (CPCPC), which is a vehicle for industry-driven research on the promotion, development, and transfer of innovative technology on premium carbon produces from coal to the U.S. industry. The CPCPC is an initiative being led by Penn State, its co-charter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provides the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity has continued under the present cooperative agreement, No. DE-FC26-03NT41874, which started October 1, 2003. The objective of the second agreement is to continue the successful operation of the CPCPC. The CPCPC has enjoyed tremendous success with its organizational structure, that includes Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC is its industry-led council that selects proposals submitted by CPCPC members to ensure CPCPC target areas have strong industrial support. Base funding for the selected projects is provided by NETL with matching funds from industry. At the annual funding meeting held in October 2003, ten projects were selected for funding. Subcontracts were let from Penn State to the subcontractors on March 1, 2004. Nine of the ten 2004 projects were completed during the previous annual reporting period and their final reports were submitted with the previous annual report (i.e., 10/01/04-09/30/05). The final report for the remaining project, which was submitted during this reporting period (i.e., 10/01/05-09/30/06), is attached. At the annual funding meeting held in November 2004, eleven projects were selected for funding. Subcontracts were let from Penn State to the subcontractors on March 1, 2005. Three additional projects were selected for funding during the April 2005 tutorial/funding meeting. Subcontracts were let from Penn State to the subcontractors on July 1, 2005. Of these fourteen 2005 projects, eleven have been completed and the final reports are attached. An annual funding meeting was held in November 2005 and the council selected five projects for funding. Subcontracts were let from Penn State to the subcontractors on March 1, 2006, except for one that started October 1, 2006.

Miller, Bruce G

2006-09-29T23:59:59.000Z

246

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Print Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

247

Middle East: Production expansion projects roar ahead. [Oil and gas industry statistics and outlooks in the Middle East  

SciTech Connect

In the Middle East, rig count is at its highest level since 1985. Every major producer in the region is working towards a goal of maximizing its sustainable producing rate, except Iraq which would if it could. Saudi Arabia may even reach its ambitious target a year early. This paper reviews the goals and forecasts for the oil and gas industry in the Middle East. It summarizes the exploration activity over the past year and includes information of geophysical methods used, numbers of wells drilling, types of well drilled, total footages, number of completions, and the political influence on all of these aspects. Both on and offshore sites are discussed.

Not Available

1993-08-01T23:59:59.000Z

248

A multi-attribute value assessment method for the early product development phase with application to the business airplane industry  

E-Print Network (OSTI)

(cont.) market. The method is also used to extract quantitative evidence indicating the existence of enterprise-related attributes for consumer value in products. Marking the first independent review of the loss function-based ...

Downen, Troy Douglas

2005-01-01T23:59:59.000Z

249

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry banner Industry banner Neutron scattering research has applications in practically every field, and neutron research at ORNL is leading to productive partnerships with the industrial and business communities. We welcome proposals for all types of research, including those involving proprietary work. Recent studies have led to discoveries with potential applications in fields such as medicine, energy, and various metals technologies. For more information, please see our recent research highlights. Research Collaborations Industry-Driven Research Benefits Plastics Manufacturing Corning uses VULCAN to test limits of ceramic material for car emission controls, filtration devices Neutrons Probe Inner Workings of Batteries Industry and Neutron Science: Working To Make a Match

250

Economic Evaluation of By-Product Power/Co-Generation Systems for Industrial Plants with Fluidized-Bed Coal Burning Facilities  

E-Print Network (OSTI)

Economic analysis of the construction and operation of by-product electric power and steam/power cogeneration systems in coal fired fluidized-bed steam cycles, located at individual industrial sites analyzed by the author, is being presented. The plants analyzed employ fluidized bed boilers for generation of steam for process and building/heating/cooling demands, in conjunction with electric power co-generation. Results of the analysis are presented, using life cycle costs and investment payback periods, pinpointing the areas, type and magnitude of costs which should be considered in the selection of combustors or systems. Capital and operating costs, and recognized technical and economic barriers are also presented and their effects indicated. Life cycle cost of each of the alternatives analyzed are compared and the expected payback periods for the different size FBC plants and for different annual average production levels are discussed.

Mesko, J. E.

1980-01-01T23:59:59.000Z

251

Guardian Industries | Open Energy Information  

Open Energy Info (EERE)

Industries Industries Jump to: navigation, search Name Guardian Industries Place Auburn Hills, MI Website http://www.guardian.com/ References Results of NREL Testing (Glass Magazine)[1] Guardian News Archive[2] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Other Relationship Partnering Center within NREL Transportation Technologies and Systems Partnership Year 2002 LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Guardian Industries is a company located in Auburn Hills, MI. References ↑ "Results of NREL Testing (Glass Magazine)" ↑ "Guardian News Archive" Retrieved from "http://en.openei.org/w/index.php?title=Guardian_Industries&oldid=381719" Categories: Clean Energy Organizations

252

Wastepaper recycling in the packaging industry. (Latest citations from Packaging Science and Technology Abstracts database). Published Search  

Science Conference Proceedings (OSTI)

The bibliography contains citations concerning the reclamation and re-use of waste paper in the packaging industry. Uses of recycled papers include containers, paper manufacture, paperboard products, and other packaging applications. Economics, environmental impacts, legislation, and feasibility studies are included. Problems associated with recycling paper products, and comparisons with plastic products are also considered. Biodegradation of packaging materials is considered in separate bibliographies. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-07-01T23:59:59.000Z

253

Qualification of the Second Batch Production 9-Cell Cavities Manufactured by AES and Validation of the First US Industrial Cavity Vendor for ILC  

SciTech Connect

One of the major goals of ILC SRF cavity R&D is to develop industrial capabilities of cavity manufacture and processing in all three regions. In the past several years, Jefferson Lab, in collaboration with Fermi National Accelerator Laboratory, has processed and tested all the 9-cell cavities of the first batch (4 cavities) and second batch (6 cavities) production cavities manufactured by Advanced Energy Systems Inc. (AES). Over the course, close information feedback was maintained, resulting in changes in fabrication and processing procedures. A light buffered chemical polishing was introduced, removing the weld splatters that could not be effectively removed by heavy EP alone. An 800 Celsius 2 hour vacuum furnace heat treatment procedure replaced the original 600 Celsius 10 hour procedure. Four out of the six 9-cell cavities of the second production bath achieved a gradient of 36-41 MV/m at a Q0 of more than 8·109 at 35 MV/m. This result validated AES as the first “ILC certified” industrial vendor in the US for ILC cavity manufacture.

Geng, R L; Golden, B A; Kushnick, P; Overton, R B; Calderaro, M; Peterson, E; Rathke, J; Champion, M S; Follkie, J

2011-07-01T23:59:59.000Z

254

Uranium industry annual 1998  

SciTech Connect

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

NONE

1999-04-22T23:59:59.000Z

255

Uranium industry annual 1994  

SciTech Connect

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

NONE

1995-07-05T23:59:59.000Z

256

Biodiesel Industries Inc | Open Energy Information  

Open Energy Info (EERE)

Industries Inc Place Santa Barbara, California Zip 93110 Product Biodiesel producer and facility developer. References Biodiesel Industries Inc1 LinkedIn Connections CrunchBase...

257

Kishimura Industry Co | Open Energy Information  

Open Energy Info (EERE)

Kishimura Industry Co Jump to: navigation, search Name Kishimura Industry Co Place Kanagawa-Ken, Japan Sector Solar, Vehicles Product Developer of solar power systems and...

258

Millennium Energy Industries | Open Energy Information  

Open Energy Info (EERE)

Industries Jump to: navigation, search Name Millennium Energy Industries Place Jordan Zip 1182 Sector Solar Product Jordan-based solar energy firm focused in MENA region....

259

California Solar Energy Industries Association | Open Energy...  

Open Energy Info (EERE)

Name California Solar Energy Industries Association Place Rio Vista, California Zip 94571 Sector Solar Product California Solar Energy Industries Association is a trade group...

260

Danish Wind Industry Association | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Name Danish Wind Industry Association Place Copenhagen V, Denmark Zip DK-1552 Sector Wind energy Product The Danish Wind Industry Association (DWIA) is...

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

CRV industrial Ltda | Open Energy Information  

Open Energy Info (EERE)

CRV industrial Ltda Place Carmo do Rio Verde, Goias, Brazil Sector Biomass Product Ethanol and biomass energy producer References CRV industrial Ltda1 LinkedIn Connections...

262

Illinois mineral industry in 1981-83 and review of preliminary mineral production data for 1984. Illinois mineral notes  

SciTech Connect

The output and value of minerals mined, processed, and manufactured into products in Illinois are summarized in this report for 1981-83. Materials used in manufacturing were not necessarily extracted within the state. Coal continued to be the leading commodity in terms of value. Oil ranked second; stone, third; sand and gravel, fourth; and fluorspar, fifth.

Samson, I.E.; Bhagwat, S.B.

1985-01-01T23:59:59.000Z

263

JOM Subject Index  

Science Conference Proceedings (OSTI)

Feb 8, 2008 ... Polymers is well indexed and each chapter ends with a glossary, summary, exercises, and suggestions for further reading. One feature that ...

264

Applied Parallel Metadata Indexing  

SciTech Connect

The GPFS Archive is parallel archive is a parallel archive used by hundreds of users in the Turquoise collaboration network. It houses 4+ petabytes of data in more than 170 million files. Currently, users must navigate the file system to retrieve their data, requiring them to remember file paths and names. A better solution might allow users to tag data with meaningful labels and searach the archive using standard and user-defined metadata, while maintaining security. last summer, I developed the backend to a tool that adheres to these design goals. The backend works by importing GPFS metadata into a MongoDB cluster, which is then indexed on each attribute. This summer, the author implemented security and developed the user interfae for the search tool. To meet security requirements, each database table is associated with a single user, which only stores records that the user may read, and requires a set of credentials to access. The interface to the search tool is implemented using FUSE (Filesystem in USErspace). FUSE is an intermediate layer that intercepts file system calls and allows the developer to redefine how those calls behave. In the case of this tool, FUSE interfaces with MongoDB to issue queries and populate output. A FUSE implementation is desirable because it allows users to interact with the search tool using commands they are already familiar with. These security and interface additions are essential for a usable product.

Jacobi, Michael R [Los Alamos National Laboratory

2012-08-01T23:59:59.000Z

265

Texas Industries of the Future  

E-Print Network (OSTI)

The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs, resulting in improved competitive performance. The bottom line for Texas industry is savings in energy and materials, cost-effective environmental compliance, increased productivity, reduced waste, and enhanced product quality. The state program leverages the programs and tools of the federal Department of Energy's Industries of the Future. At the federal level, there are nine Industries of the Future: refining, chemicals, aluminum, steel, metal casting, glass, mining, agriculture, and forest products. These industries were selected nationally because they supply over 90% of the U.S. economy's material needs and account for 75% of all energy use by U.S. industry. In Texas, three IOF sectors, chemicals, refining and forest products, account for 86% of the energy used by industry in this state.

Ferland, K.

2002-04-01T23:59:59.000Z

266

Feasibility study of wood-fired cogeneration at a Wood Products Industrial Park, Belington, WV. Phase II  

DOE Green Energy (OSTI)

Customarily, electricity is generated in a utility power plant while thermal energy is generated in a heating/cooling plant; the electricity produced at the power plant is transmitted to the heating/cooling plant to power equipments. These two separate systems waste vast amounts of heat and result in individual efficiencies of about 35%. Cogeneration is the sequential production of power (electrical or mechanical) and thermal energy (process steam, hot/chilled water) from a single power source; the reject heat of one process issued as input into the subsequent process. Cogeneration increases the efficiency of these stand-alone systems by producing these two products sequentially at one location using a small additional amount of fuel, rendering the system efficiency greater than 70%. This report discusses cogeneration technologies as applied to wood fuel fired system.

Vasenda, S.K.; Hassler, C.C.

1992-06-01T23:59:59.000Z

267

Turning industry visions into reality  

Science Conference Proceedings (OSTI)

This brochure outlines the activities of the Office of Industrial Technologies (OIT) in the Department of Energy. OIT activities are aimed at industry adoption of energy-efficient, pollution-reducing technologies and include research and development on advanced technologies, financing, technical assistance, information dissemination, education, and bringing together industry groups, universities, National Laboratories, states, and environmentalists. OIT`s core initiative is to facilitate partnerships within seven materials and process industries: aluminum, chemicals, forest products, glass, metalcasting, petroleum refining, and steel industries.

NONE

1997-01-01T23:59:59.000Z

268

Botanischer Garten Index Seminum  

E-Print Network (OSTI)

Botanischer Garten Index Seminum Samenkatalog 2012 Samenkatalog des Botanischen Gartens und des Parco Botanico del Canton Ticino, Isole di Brissago Universität Zürich Botanischer Garten Gartens und des Parco Botanico del Canton Ticino, Isole di Brissago #12;III INDEX SEMINUM 2012 Bedingungen

Zürich, Universität

269

Gradient index retroreflector  

DOE Patents (OSTI)

A retroreflector is formed of a graded index lens and a reflective coating at one end. The lens has a length of an odd multiple of a quarter period thereof. Hexagonally shaped graded index lenses may be closely packed in an array to form a retroreflecting surface.

Layne, C.B.

1986-03-06T23:59:59.000Z

270

Enzymes and microorganisms in food industry waste processing and conversion to useful products: a review of the literature  

DOE Green Energy (OSTI)

Bioconversion of food processing wastes is receiving increased attention with the realization that waste components represent an available and utilizable resource for conversion to useful products. Liquid wastes are characterized as dilute streams containing sugars, starches, proteins, and fats. Solid wastes are generally cellulosic, but may contain other biopolymers. The greatest potential for economic bioconversion is represented by processes to convert cellulose to glucose, glucose to alcohol and protein, starch to invert sugar, and dilute waste streams to methane by anaerobic digestion. Microbial or enzymatic processes to accomplish these conversions are described.

Carroad, P.A.; Wilke, C.R.

1976-12-01T23:59:59.000Z

271

Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study  

Science Conference Proceedings (OSTI)

This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

Conrad, F.; Tonn, B.

1999-05-01T23:59:59.000Z

272

Applicability of the Normalized Difference Vegetation Index (NDVI) in Index-Based Crop Insurance Design  

Science Conference Proceedings (OSTI)

Index insurance is becoming increasingly popular because of its ability to provide low-cost, relatively easy to implement agricultural insurance for vegetation types whose productivity has been notoriously difficult to measure and to farmers in ...

Calum G. Turvey; Megan K. Mclaurin

2012-10-01T23:59:59.000Z

273

Uranium industry annual 1996  

SciTech Connect

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

NONE

1997-04-01T23:59:59.000Z

274

Carbon Emissions: Petroleum Refining Industry  

U.S. Energy Information Administration (EIA)

Energy-Related Carbon Emissions for the Petroleum and Coal Products Industry, 1994. Petroleum refining is by far the largest component of the petroleum and ...

275

Greenline Industries | Open Energy Information  

Open Energy Info (EERE)

Industries Place San Rafael, California Zip 94901 Product Small to medium scale biodiesel plants designer and producer. They also run a biodiesel plant in Vallejo,...

276

Shrenik Industries | Open Energy Information  

Open Energy Info (EERE)

India Zip 416 109 Sector Wind energy Product Maharashtra-based wind turbine tower manufacturer and subsidiary of the Sanjay Ghodawat Group of Industries. References...

277

Ventower Industries | Open Energy Information  

Open Energy Info (EERE)

Place Monroe, Michigan Zip 48161 Sector Wind energy Product Michigan-based wind turbine tower manufacturer. References Ventower Industries1 LinkedIn Connections CrunchBase...

278

Industrial energy management | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify...

279

Eolica Industrial | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Name Eolica Industrial Place Sao Paulo, Sao Paulo, Brazil Zip 01020-901 Sector Wind energy Product Brazil based wind turbine steel towers and...

280

JOM Subject Index  

Science Conference Proceedings (OSTI)

Mar 10, 2010 ... Modeling is well indexed and has a glossary and list of symbols which is needed in such an equation rich book. Modelling treats well the topics ...

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

JOM Subject Index - TMS  

Science Conference Proceedings (OSTI)

08/21/2008 - Ceramics Science and Technology: Volume ... Bioceramics, which includes bioglass, are the materials in which the industry is showing a great ...

282

Uranium Industry Annual, 1992  

Science Conference Proceedings (OSTI)

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

Not Available

1993-10-28T23:59:59.000Z

283

EPIC Industry Manual for Printed Circuit Boards  

Science Conference Proceedings (OSTI)

The EPRI Partnership for Industrial Competitiveness (EPIC) focuses on identifying opportunities for improving the industrial efficiency of selected industries that are customers of participating utilities. The goal is to examine opportunities to improve the efficiency and productivity and reduce environmental impacts of any particular industrial customer. EPIC's industry manuals are intended to provide broad coverage within a candidate industry, with different sectors of the industry linked by focusing o...

2000-11-17T23:59:59.000Z

284

Waste-paper recyling in the packaging industry. January 1982-August 1989 (a Bibliography from Packaging Science and Technology Abstracts data base). Report for January 1982-August 1989  

Science Conference Proceedings (OSTI)

This bibliography contains citations concerning the reclamation and re-use of waste paper in the packaging industry. Uses of recycled papers include containers, paper manufacture, paperboard products, and other packaging applications. Economics, environmental impacts, legislation, and feasibility studies are included. Problems associated with recycling paper products, and comparisons with plastic products are also considered. Biodegradation of packaging materials is considered in separate bibliographies. (Contains 142 citations fully indexed and including a title list.)

Not Available

1990-03-01T23:59:59.000Z

285

Industrial Assessment Center  

SciTech Connect

This project involved providing technical assistance to help small and medium size industries in Wisconsin to reduce operating costs by managing energy, waste and productivity. The project helped save 525 companies on average about $40,000 per year. Under the direction of Dr. Saxena, more than twenty undergraduate and ten graduate students were trained in energy, waste, and productivity management.

Umesh K. Saxena

2009-06-04T23:59:59.000Z

286

Industrial Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Industrial Industrial / Manufacturing Buildings Industrial/manufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey (MECS). See the MECS home page for further information. Commercial buildings found on a manufacturing industrial complex, such as an office building for a manufacturer, are not considered to be commercial if they have the same owner and operator as the industrial complex. However, they would be counted in the CBECS if they were owned and operated independently of the manufacturing industrial complex. Specific questions may be directed to: Joelle Michaels joelle.michaels@eia.doe.gov CBECS Manager Release date: January 21, 2003 Page last modified: May 5, 2009 10:18 AM http://www.eia.gov/consumption/commercial/data/archive/cbecs/pba99/industrial.html

287

Industrial Applications  

Science Conference Proceedings (OSTI)

Table 2   Frequently used rubber linings in other industries...Application Lining Power industry Scrubber towers Blended chlorobutyl Limestone slurry tanks Blended chlorobutyl Slurry piping Blended chlorobutyl 60 Shore A hardness natural rubber Seawater cooling water

288

Natural Gas Industrial Price  

Gasoline and Diesel Fuel Update (EIA)

Citygate Price Residential Price Commercial Price Industrial Price Electric Power Price Gross Withdrawals Gross Withdrawals From Gas Wells Gross Withdrawals From Oil Wells Gross Withdrawals From Shale Gas Wells Gross Withdrawals From Coalbed Wells Repressuring Nonhydrocarbon Gases Removed Vented and Flared Marketed Production NGPL Production, Gaseous Equivalent Dry Production Imports By Pipeline LNG Imports Exports Exports By Pipeline LNG Exports Underground Storage Capacity Gas in Underground Storage Base Gas in Underground Storage Working Gas in Underground Storage Underground Storage Injections Underground Storage Withdrawals Underground Storage Net Withdrawals Total Consumption Lease and Plant Fuel Consumption Pipeline & Distribution Use Delivered to Consumers Residential Commercial Industrial Vehicle Fuel Electric Power Period: Monthly Annual

289

Industries Affected  

Science Conference Proceedings (OSTI)

Table 2   Industries affected by microbiologically influenced corrosion...generation: nuclear, hydro, fossil fuel,

290

In this document, we study the industrial district of Jepara, Indonesia. It is specialised in furniture production, for the Indonesian consumption, as well as for worldwide  

E-Print Network (OSTI)

In this document, we study the industrial district of Jepara, Indonesia. It is specialised INDUSTRY IN JEPARA, INDONESIA ATLAS OF WOODEN FURNITURE INDUSTRY IN JEPARA, INDONESIA Jean-Marc Roda IN JEPARA, INDONESIA #12;Copyright CIRAD dan CIFOR All rights reserved. Published 2007 Printed by Harapan

Paris-Sud XI, Université de

291

Analysis and Decomposition of the Energy Intensity of Industries in  

NLE Websites -- All DOE Office Websites (Extended Search)

and Decomposition of the Energy Intensity of Industries in and Decomposition of the Energy Intensity of Industries in California Title Analysis and Decomposition of the Energy Intensity of Industries in California Publication Type Journal Article Year of Publication 2012 Authors de la du Can, Stephane Rue, Ali Hasanbeigi, and Jayant A. Sathaye Journal Energy Policy Volume 46 Pagination 234-245 Keywords california, co2 emissions, energy intensity, energy use Abstract In 2008, the gross domestic product (GDP) of California industry was larger than GDP of industry in any other U.S. states. This study analyses the energy use of and output from seventeen industry subsectors in California and performs decomposition analysis to assess the influence of different factors on California industry energy use. The logarithmic mean Divisia index method is used for the decomposition analysis. The decomposition analysis results show that the observed reduction of energy use in California industry since 2000 is the result of two main factors: the intensity effect and the structural effect. The intensity effect has started pushing final energy use downward in 2000 and has since amplified. The second large effect is the structural effect. The significant decrease of the energy-intensive "Oil and Gas Extraction" subsector's share of total industry value added, from 15% in 1997 to 5% in 2008, and the increase of the non-energy intensive "Electric and electronic equipment manufacturing" sector's share of value added, from 7% in 1997 to 30% in 2008, both contributed to a decrease in the energy intensity in the industry sector

292

Jinlong Industrial Group | Open Energy Information  

Open Energy Info (EERE)

Solar Product Solar energy company based in Hebei province, engaged in manufacturing photovoltaic cell, crystal silicon and other key products. References Jinlong Industrial...

293

Success stories: Industrial energy management | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

stories Production Strategy Saves Money & Energy: Eastman Chemical Company Related resources Guidelines for Energy Management Energy guides Industrial service and product providers...

294

ARM - Site Index  

NLE Websites -- All DOE Office Websites (Extended Search)

govSite Index govSite Index Expand | Collapse Site Index Videos Image Library About ARM About ARM (home) ARM and the Recovery Act ARM and the Recovery Act (home) ARM Recovery Act Project FAQs Recovery Act Instruments ARM Climate Research Facility Contributions to International Polar Year (IPY) ARM Climate Research Facility Contributions to International Polar Year (IPY) (home) ARM Education and Outreach Efforts Support IPY Research Support for International Polar Year (IPY) ARM Organization ARM Organization (home) Laboratory Partners ARM Safety Policy ARM Science Board ARM Science Board (home) Board Business Become a User Comments and Questions Contacts Contacts (home) ARM Engineering and Operations Contacts Facility Statistics Facility Statistics (home) Historical Field Campaign Statistics

295

JOM Subject Index - TMS  

Science Conference Proceedings (OSTI)

Jul 29, 2005 ... This book is definitely a valuable asset for a novice in the die-casting industry, and those who would like to minimize their learning curve on the ...

296

JOM Subject Index  

Science Conference Proceedings (OSTI)

02/2/2009 - Science and Civilization in China, Volume V: Part ... It traces the development of the iron and steel industry in China from earliest times to the ...

297

RESULTS OF THE TECHNICAL AND ECONOMIC FEASIBILITY ANALYSIS FOR A NOVEL BIOMASS GASIFICATION-BASED POWER GENERATION SYSTEM FOR THE FOREST PRODUCTS INDUSTRY  

DOE Green Energy (OSTI)

In 2001, the Gas Technology Institute (GTI) entered into Cooperative Agreement DE-FC26-01NT41108 with the U.S. Department of Energy (DOE) for an Agenda 2020 project to develop an advanced biomass gasification-based power generation system for near-term deployment in the Forest Products Industry (FPI). The advanced power system combines three advanced components, including biomass gasification, 3-stage stoker-fired combustion for biomass conversion, and externally recuperated gas turbines (ERGTs) for power generation. The primary performance goals for the advanced power system are to provide increased self-generated power production for the mill and to increase wastewood utilization while decreasing fossil fuel use. Additional goals are to reduce boiler NOx and CO{sub 2} emissions. The current study was conducted to determine the technical and economic feasibility of an Advanced Power Generation System capable of meeting these goals so that a capital investment decision can be made regarding its implementation at a paper mill demonstration site in DeRidder, LA. Preliminary designs and cost estimates were developed for all major equipment, boiler modifications and balance of plant requirements including all utilities required for the project. A three-step implementation plan was developed to reduce technology risk. The plant design was found to meet the primary objectives of the project for increased bark utilization, decreased fossil fuel use, and increased self-generated power in the mill. Bark utilization for the modified plant is significantly higher (90-130%) than current operation compared to the 50% design goal. For equivalent steam production, the total gas usage for the fully implemented plant is 29% lower than current operation. While the current average steam production from No.2 Boiler is about 213,000 lb/h, the total steam production from the modified plant is 379,000 lb/h. This steam production increase will be accomplished at a grate heat release rate (GHRR) equal to the original boiler design. Boiler efficiencies (cogeneration-steam plus air) is increased from the original design value of 70% to 78.9% due to a combination of improved burnout, operation with lower excess air, and drier fuel. For the fully implemented plant, the thermal efficiency of fuel to electricity conversion is 79.8% in the cogeneration mode, 5% above the design goal. Finally, self-generated electricity will be increased from the 10.8 MW currently attributable to No.2 Boiler to 46.7MW, an increase of 332%. Environmental benefits derived from the system include a reduction in NOx emissions from the boiler of about 30-50% (90-130 tons/year) through syngas reburning, improved carbon burnout and lower excess air. This does not count NOx reduction that may be associated with replacement of purchased electricity. The project would reduce CO{sub 2} emissions from the generation of electricity to meet the mill's power requirements, including 50,000 tons/yr from a net reduction in gas usage in the mill and an additional 410,000 tons/yr reduction in CO{sub 2} emissions due to a 34 MW reduction of purchased electricity. The total CO{sub 2} reduction amounts to about 33% of the CO{sub 2} currently generated to meet the mills electricity requirement. The overall conclusion of the study is that while significant engineering challenges are presented by the proposed system, they can be met with operationally acceptable and cost effective solutions. The benefits of the system can be realized in an economic manner, with a simple payback period on the order of 6 years. The results of the study are applicable to many paper mills in the U.S. firing woodwastes and other solid fuels for steam and power production.

Bruce Bryan; Joseph Rabovitser; Sunil Ghose; Jim Patel

2003-11-01T23:59:59.000Z

298

Edible Oleogels: Structure and Health ImplicationsChapter 6 Candelilla Wax as an Organogelator for Vegetable Oils–An Alternative to Develop trans-free Products for the Food Industry  

Science Conference Proceedings (OSTI)

Edible Oleogels: Structure and Health Implications Chapter 6 Candelilla Wax as an Organogelator for Vegetable Oils–An Alternative to Develop trans-free Products for the Food Industry Food Science eChapters Food Science & Technology A2C008

299

Metabolic engineering of E.coli for the production of a precursor to artemisinin, an anti-malarial drug [Chapter 25 in Manual of Industrial Microbiology and Biotechnology, 3rd edition  

SciTech Connect

This document is Chapter 25 in the Manual of Industrial Microbiology and Biotechnology, 3rd edition. Topics covered include: Incorporation of Amorpha-4,11-Diene Biosynthetic Pathway into E. coli; Amorpha-4,11-Diene Pathway Optimization; "-Omics" Analyses for Increased Amorpha-4,11-Diene Production; Biosynthetic Oxidation of Amorpha-4,11-Diene.

Petzold, Christopher; Keasling, Jay

2011-07-18T23:59:59.000Z

300

An Industry/DOE Program to Develop and Benchmark Advanced Diamond Product Drill Bits and HP/HT Drilling Fluids to Significantly Improve Rates of Penetration  

Science Conference Proceedings (OSTI)

A deep drilling research program titled 'An Industry/DOE Program to Develop and Benchmark Advanced Diamond Product Drill Bits and HP/HT Drilling Fluids to Significantly Improve Rates of Penetration' was conducted at TerraTek's Drilling and Completions Laboratory. Drilling tests were run to simulate deep drilling by using high bore pressures and high confining and overburden stresses. The purpose of this testing was to gain insight into practices that would improve rates of penetration and mechanical specific energy while drilling under high pressure conditions. Thirty-seven test series were run utilizing a variety of drilling parameters which allowed analysis of the performance of drill bits and drilling fluids. Five different drill bit types or styles were tested: four-bladed polycrystalline diamond compact (PDC), 7-bladed PDC in regular and long profile, roller-cone, and impregnated. There were three different rock types used to simulate deep formations: Mancos shale, Carthage marble, and Crab Orchard sandstone. The testing also analyzed various drilling fluids and the extent to which they improved drilling. The PDC drill bits provided the best performance overall. The impregnated and tungsten carbide insert roller-cone drill bits performed poorly under the conditions chosen. The cesium formate drilling fluid outperformed all other drilling muds when drilling in the Carthage marble and Mancos shale with PDC drill bits. The oil base drilling fluid with manganese tetroxide weighting material provided the best performance when drilling the Crab Orchard sandstone.

TerraTek

2007-06-30T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Waste treatment: Beverage industry. (Latest citations from Food Science & Technology Abstracts (FSTA)). Published Search  

SciTech Connect

The bibliography contains citations concerning waste treatment in the alcoholic and non-alcoholic beverage industries. Brewery effluent and wastewater management and disposal are reviewed. References cover aerobic treatment, sources of effluents, waste reduction, waste fermentation, effluent purification, and cost-effectiveness evaluation. The use of wastes for biogas production and for building material manufacture is examined. (Contains 50-250 citations and includes a subject term index and title list.)

NONE

1995-08-01T23:59:59.000Z

302

Fuel consumption: Industrial, residential, and general studies. (Latest citations from the NTIS Bibliographic database). Published Search  

SciTech Connect

The bibliography contains citations concerning fuel consumption in industrial and residential sectors. General studies of fuel supply, demand, policy, forecasts, and consumption models are presented. Citations examine fuel information and forecasting systems, fuel production, international economic and energy activities, heating oils, and pollution control. Fuel consumption in the transportation sector is covered in a separate bibliography. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1994-08-01T23:59:59.000Z

303

Potential Land Use Implications of a Global Biofuels Industry  

E-Print Network (OSTI)

In this paper we investigate the potential production and implications of a global biofuels industry. We

Gurgel, Angelo C.

304

Uranium industry annual 1995  

SciTech Connect

The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

NONE

1996-05-01T23:59:59.000Z

305

2009 Industry-Wide Buyer's Guide  

SciTech Connect

The guide lists US companies supplying equipment and services to coal mining and coal preparation operations. An index by product category is included.

NONE

2009-10-15T23:59:59.000Z

306

Fiber optic refractive index monitor  

DOE Patents (OSTI)

A sensor for measuring the change in refractive index of a liquid uses the lowest critical angle of a normal fiber optic to achieve sensitivity when the index of the liquid is significantly less than the index of the fiber core. Another embodiment uses a liquid filled core to ensure that its index is approximately the same as the liquid being measured.

Weiss, Jonathan David (Albuquerque, NM)

2002-01-01T23:59:59.000Z

307

Industry @ ALS  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry @ ALS Industry @ ALS Industry @ ALS Concrete Industry Benefits from Ancient Romans and the ALS Print Thursday, 17 October 2013 14:24 New insights into the Romans' ingenious concrete harbor structures emerging from ALS beamline research could move the modern concrete industry toward its goal of a reduced carbon footprint. Summary Slide Read more... Moving Industry Forward: Finding the Environmental Opportunity in Biochar Print Thursday, 12 September 2013 08:41 Using ALS Beamlines 10.3.2 and 8.3.2, the Environmental Protection Agency (EPA) is currently investigating how biochar sorbs environmental toxins and which kinds of biochar are the most effective. The possibilities for widespread use have already launched entrepreneurial commercial ventures. Summary Slide

308

Coal industry annual 1997  

Science Conference Proceedings (OSTI)

Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

NONE

1998-12-01T23:59:59.000Z

309

Coal industry annual 1993  

Science Conference Proceedings (OSTI)

Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

Not Available

1994-12-06T23:59:59.000Z

310

BNL Website Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Index Site Index A B C D E F G H I J L M N O P Q R S T U V W A About Brookhaven Accelerator-based Science Accelerator Test Facility Addiction Research Adopt-a-Platoon AGS Booster Alternating Gradient Synchrotron Association of Students and Post-docs (ASAP) ATLAS Awards B Badging Office Basic Energy Sciences Directorate Bike/Bicycles Biofuel Research Biosciences Department BRAHMS Brookhaven Advocacy Council Brookhaven Council Brookhaven Employees Recreation Association (BERA) Brookhaven Graphite Research Reactor (environmental cleanup) Brookhaven Graphite Research Reactor (history) Brookhaven Lectures Brookhaven Medical Research Reactor Brookhaven Retired Employees' Association (BREA) Brookhaven Science Associates Brookhaven This Week (Weekly News Summary) Brookhaven Women in Science

311

Solar Reflectance Index Calculator  

NLE Websites -- All DOE Office Websites (Extended Search)

Reflectance Index Calculator Reflectance Index Calculator ASTM Designation: E 1980-01 Enter A State: Select a state Alabama Alaska Arkansas Arizona California Colorado Connecticut Delaware Florida Georgia Hawaii Iowa Idaho Illinois Indiana Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana North Carolina North Dakota Nebraska Nevada New Hampshire New Jersey New Mexico New York Ohio Oklahoma Oregon Pennsylvania Pacific Islands Puerto Rico Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Wisconsin West Virginia Wyoming Canadian Cities Enter A City: Select a city Wind Speed (mph) Wind Speed (m/s) Please input both the SR and the TE and the convection coeficient and surface temperature will be calculated

312

BNL Newsroom | Tags Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Tag IndexMedia & Communications Office Tag IndexMedia & Communications Office Newsroom Photos Image Library Historic Images Photo Permissions Videos Fact Sheets Lab History News Categories Contacts Currently Showing News Release Tags Show Tags for News Releases Features Videos What is this? The tag cloud shows the relative proportion of tags assigned to each news release. Click on any tag to see news releases associated with that tag. AAAS (8) accelerators (7) addiction (43) AGS (1) ARRA (12) ATLAS (22) award (100) battelle (8) BERA (1) biochemistry (14) biology (63) biosciences (13) blueprint (2) BNL lecture (1) BOSS (3) bridge contest (5) BSA (26) BSA distinguished lecture (13) BWIS (23) BWIS lecture (21) cancer research (13) catalysis (22) celebrations (4) CES (1) CFN (89) chemistry (61) commercial (43) community (21)

313

Aluminum: Industry of the future  

SciTech Connect

For over a century, the US aluminum industry has led the global market with advances in technology, product development, and marketing. Industry leaders recognize both the opportunities and challenges they face as they head into the 21st century, and that cooperative R and D is key to their success. In a unique partnership, aluminum industry leaders have teamed with the US Department of Energy`s Office of Industrial Technologies (OIT) to focus on innovative technologies that will help to strengthen the competitive position of the US aluminum industry and, at the same time, further important national goals. This industry-led partnership, the Aluminum Industry of the Future, promotes technologies that optimize the use of energy and materials in operations and reduce wastes and energy-related emissions. Led by The Aluminum Association, industry leaders began by developing a unified vision of future market, business, energy, and environmental goals. Their vision document, Partnerships for the Future, articulates a compelling vision for the next 20 years: to maintain and grow the aluminum industry through the manufacture and sale of competitively priced, socially desirable, and ecologically sustainable products. Continued global leadership in materials markets will require the combined resources of industry, universities, and government laboratories. By developing a unified vision, the aluminum industry has provided a framework for the next step in the Industries of the Future process, the development of a technology roadmap designed to facilitate cooperative R and D.

1998-11-01T23:59:59.000Z

314

A1309-09/10 The U.S. Copper-base Scrap Industry And Its By-products An Overview Tenth Edition  

E-Print Network (OSTI)

The purpose of this report is to provide a brief background on the U.S. copper and copper alloy secondary processing industry. It is felt that policy and decision-makers can use a ready reference on an industry that is generally so little understood. The industry has undergone many changes over the past few decades and has been in decline over much of the last ten years. While the coverage is not comprehensive, a brief mention is made of the many problems impacting the health of the industry. The secondary industry and the Government agencies most concerned with legislation affecting the collection, processing and markets for scrap are both working to overcome some of the current difficulties. Nevertheless, for some sectors of the secondary copper industry, the past ten years have been particularly difficult, given the restrictions within which they have operated, the potential for new restrictions, and the current copper market. The author would like to thank those in the industry who were kind enough to host informative visits to their plants and to provide much of the information contained in this report. In particular, the late Alan Silber of RECAP, was of tremendous help in outlining the original report. Daniel Edelstein, Copper Specialist with the U.S. Geological Survey, also provided substantial help and advice. The International Copper Study Group, was of great assistance in providing world copper industry statistics. The research

Janice L. Jolly

2010-01-01T23:59:59.000Z

315

INDEX | Open Energy Information  

Open Energy Info (EERE)

INDEX INDEX Jump to: navigation, search Tool Summary Name: INDEX Agency/Company /Organization: Criterion Planners Phase: Determine Baseline, "Evaluate Options and Determine Feasibility" is not in the list of possible values (Bring the Right People Together, Create a Vision, Determine Baseline, Evaluate Options, Develop Goals, Prepare a Plan, Get Feedback, Develop Finance and Implement Projects, Create Early Successes, Evaluate Effectiveness and Revise as Needed) for this property., "Perpare a Plan" is not in the list of possible values (Bring the Right People Together, Create a Vision, Determine Baseline, Evaluate Options, Develop Goals, Prepare a Plan, Get Feedback, Develop Finance and Implement Projects, Create Early Successes, Evaluate Effectiveness and Revise as Needed) for this property., "Implement the Plan" is not in the list of possible values (Bring the Right People Together, Create a Vision, Determine Baseline, Evaluate Options, Develop Goals, Prepare a Plan, Get Feedback, Develop Finance and Implement Projects, Create Early Successes, Evaluate Effectiveness and Revise as Needed) for this property., "Evaluate Effectiveness and Revise" is not in the list of possible values (Bring the Right People Together, Create a Vision, Determine Baseline, Evaluate Options, Develop Goals, Prepare a Plan, Get Feedback, Develop Finance and Implement Projects, Create Early Successes, Evaluate Effectiveness and Revise as Needed) for this property.

316

First Biomass Conference of the Americas: Energy, environment, agriculture, and industry. Proceedings, Volume 2  

DOE Green Energy (OSTI)

This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this second volume cover Transportation Fuels, and Chemicals and Products. Transportation Fuels topics include: Biodiesel, Pyrolytic Liquids, Ethanol, Methanol and Ethers, and Commercialization. The Chemicals and Products section includes specific topics in: Research, Technology Transfer, and Commercial Systems. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Not Available

1993-10-01T23:59:59.000Z

317

Industry | OpenEI  

Open Energy Info (EERE)

Industry Industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by other industries and construction. Data is only available for Paraguay and the U.S., years 2000 to 2007. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption Industry UN Data application/zip icon XML (zip, 514 bytes) application/zip icon XLS (zip, 425 bytes) Quality Metrics

318

The Tobacco Industry Documents. What they are, what they tell us and how to search them. A Practical Manual (2nd Edition)  

E-Print Network (OSTI)

index.wmt? tab=home 2. Non-industry maintained document webspeci?c to the tobacco industry’s strategies in activitieslawsuits against the tobacco industry. Exceptionally useful

World Health Organization

2004-01-01T23:59:59.000Z

319

Indexing uncertain categorical data  

E-Print Network (OSTI)

Abstract the cleansed value directly is highly desirable. Data cleansing applications often result in uncertainty in Uncertainty in categorical data is commonplace inmany the "cleaned " value of an attribute. Many cleansing tools applications, includingdata cleaning, database integration, provide alternative corrections with associated likelihood. and biological annotation. In such domains, the correct For example, data collected from sensors is notoriously imvalue of an attribute is often unknown, but may be se- precise. As part ofan ongoing project at Purdue University, lectedfrom a reasonable number ofalternatives. Current the movement of nurses is being tracked in order to study database management systems do notprovide a convenient theirbehavior and effectiveness ofcurrent practices. Nurses meansfor representing or manipulating this type ofuncer- carry RFID tags as they move about a hospital. Numerous tainty. In this paper we extend traditional systems to ex- readers located around the building report the presence of plicitly handle uncertainty in data values. Wepropose two tags in their vicinity. The collected data is stored centrally index structuresfor efficiently searching uncertain categor- in the form "Nurse 10 inRoom 5 at 10:05 am. " Each nurse ical data, one basedon the R-tree andanother basedon an carries multiple tags. The variability in the detection range inverted index structure. Using these structures, weprovide of readers and the presence of interfering objects makes it a detailed description ofthe probabilistic equality queries impossible to position nurses accurately. Thus the applithey support. Experimental results using real andsynthetic cation may not be able to identify with certainty a single datasets demonstrate how these index structures can effec- location for the nurse at all times. A similar application is tively improve theperformance ofqueries through the use discussed in [18]. ofinternalprobabilistic information. In the context of automatic data integration, deep web data in the form of dynamic HTML pages can be used to generate relational data [23]. This is a challenging problem

Sarvjeet Singh; Chris Mayfield; Sunil Prabhakar; Rahul Shah; Susanne Hambrusch

2007-01-01T23:59:59.000Z

320

Argonne Transportation Site Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Student Competitions Technology Analysis Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Site Index General Information About TTRDC Media Center Current News News Archive Photo Archive Transportation Links Awards Contact Us Interesting Links Working with Argonne Research Resources Experts Batteries Engines & Fuels Fuel Cells Management Materials Systems Assessment Technology Analysis Tribology Vehicle Recycling Vehicle Systems Facilities Advanced Powertrain Research Facility Powertrain Test Cell 4-Wheel Drive Chassis Dynamometer Battery Test Facility Engine Research Facility Fuel Cell Test Facility Tribology Laboratory Tribology Laboratory Photo Tour Vehicle Recycling Partnership Plant Publications Searchable Database: patents, technical papers, presentations

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER  

SciTech Connect

The U. S. Department of Energy’s Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

MELINDA KRAHENBUHL

2010-05-28T23:59:59.000Z

322

A Study of the Cross-Industry Transferability of The Intergrated System of Toyota Production and Sales Management: A Case Study of Desktop Computer Manufacturing.  

E-Print Network (OSTI)

??Diversity of consumers, timely needs of the times, combined with market information, production and selling out of products, enterprises can profit possible. Want in the… (more)

Lu, Chun-Fu

2011-01-01T23:59:59.000Z

323

Comparison of National Programs for Industrial Energy Efficiency: Industry Brief  

Science Conference Proceedings (OSTI)

This report looks at the Better Buildings, Better Plants program from the Department of Energy; E3, an initiative of five U.S. federal agencies; ENERGY STAR for Industry from the Environmental Protection Agency; and Superior Energy Performance, a product of the U.S. Council for Energy-Efficient Manufacturing. By comparing the goals of several energy-efficiency programs that have been established to support industry, this report hopes to help industrial facilities find the right fit for their own ...

2013-02-25T23:59:59.000Z

324

JOM Subject Index  

Science Conference Proceedings (OSTI)

Mar 8, 2005 ... Dow Chemical Corporation was one of the first companies to exploit electrochemistry to produce chlorine and bromine. Chlorine production ...

325

JOM Subject Index - TMS  

Science Conference Proceedings (OSTI)

Fowler, who has 20 years experience with electronic imaging products, founded Definitive Imaging, Ltd. Kopp has 30 years experience in specimen preparation, ...

326

Anatomy of a Rainfall Index  

Science Conference Proceedings (OSTI)

One particular index has been commonly used to monitor precipitation in drought-prone regions such as the West African Sahel and the Brazilian Northeast. The construction of this index involves standardizing the annual total rainfall for an ...

Richard W. Katz; Michael H. Glantz

1986-04-01T23:59:59.000Z

327

Interactive montages of sprites for indexing and summarizing security video  

E-Print Network (OSTI)

In this video we present a new model of interaction for indexing and visualizing video in the context of security applications. We wish to index security video that contains relatively rare but important events, such as security video taken from large public or industrial facilities (e.g. a nuclear power plant) or exterior home security video from a residential neighborhood. We present a method of indexing video by arranging irregularly shaped icons or sprites into a montage representing motion events or security events within the original video scene. The sprites in the montage are used as an index into the original video. We also generate video montages to summarize video in which motion events are compressed and overlayed in a video of shorter time duration. This summary video also acts as an index into the original video stream.

Chris Pal; Nebojsa Jojic

2005-01-01T23:59:59.000Z

328

Vietnam National Coal Mineral Industries Group Vinacomin | Open...  

Open Energy Info (EERE)

Coal Mineral Industries Group Vinacomin Jump to: navigation, search Name Vietnam National Coal-Mineral Industries Group (Vinacomin) Place Vietnam Product Vietnam-based project...

329

ASi Industries GmbH | Open Energy Information  

Open Energy Info (EERE)

Zip D-99310 Product Manufacturer of monocrystalline ingots and wafers for the photovoltaics industry. References ASi Industries GmbH1 LinkedIn Connections CrunchBase...

330

Opportunities for Energy Efficiency and Demand Response in the California Cement Industry  

E-Print Network (OSTI)

Applications in the Cement Industry. ” Mineral Engineering Cement  Production,” Cement Industry Technical Conference, gearless mill drive,” Cement Industry Technical Conference, 

Olsen, Daniel

2012-01-01T23:59:59.000Z

331

Activated-charcoal filters: water treatment, pollution control, and industrial applications. January 1970-July 1988 (citations from the US Patent data base). Report for January 1970-July 1988  

SciTech Connect

This bibliography contains citations of selected patents concerning activated-charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, industrial leaching, and filtration of toxic gases and pollutants are described. Applications include drinking water purification, filtering beverages, production of polymer materials, solvent and metal recovery, swimming pool filtration, waste conversion, automobile fuel and exhaust systems, and footwear deodorizing. (Contains 129 citations fully indexed and including a title list.)

Not Available

1988-08-01T23:59:59.000Z

332

Activated charcoal filters: Water treatment, pollution control, and industrial applications. (Latest citations from the Patent Bibliographic database with exemplary claims. ) Published Search  

SciTech Connect

The bibliography contains citations of selected patents concerning activated charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, industrial leaching, and filtration of toxic materials and contaminants are described. Applications include drinking water purification, filtering beverages, production of polymer materials, solvent and metal recovery, waste conversion, automotive fuel and exhaust systems, swimming pool filtration, tobacco smoke filters, kitchen ventilators, medical filtration treatment, and odor absorbing materials. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-08-01T23:59:59.000Z

333

DOE Patents Database - Site Index  

Office of Scientific and Technical Information (OSTI)

Site Index Home Advanced Search About Patent News Recent Inventions Technology Transfer Resources DOE Innovations FAQ Help RSS Contact Us...

334

Index Sets and Vectorization  

SciTech Connect

Vectorization is data parallelism (SIMD, SIMT, etc.) - extension of ISA enabling the same instruction to be performed on multiple data items simultaeously. Many/most CPUs support vectorization in some form. Vectorization is difficult to enable, but can yield large efficiency gains. Extra programmer effort is required because: (1) not all algorithms can be vectorized (regular algorithm structure and fine-grain parallelism must be used); (2) most CPUs have data alignment restrictions for load/store operations (obey or risk incorrect code); (3) special directives are often needed to enable vectorization; and (4) vector instructions are architecture-specific. Vectorization is the best way to optimize for power and performance due to reduced clock cycles. When data is organized properly, a vector load instruction (i.e. movaps) can replace 'normal' load instructions (i.e. movsd). Vector operations can potentially have a smaller footprint in the instruction cache when fewer instructions need to be executed. Hybrid index sets insulate users from architecture specific details. We have applied hybrid index sets to achieve optimal vectorization. We can extend this concept to handle other programming models.

Keasler, J A

2012-03-27T23:59:59.000Z

335

One-on-one Meetings with Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

1 One-on-one Meetings with Industry The Nuclear Production Contract Source Evaluation Board (SEB) will hold one-on-one meetings with industry participants. The intent of one-on-one...

336

Industrial Utilization of Surfactants: Principles & Practice  

Science Conference Proceedings (OSTI)

This book presents, in nonmathematical fashion, the principles underlying the use of surfactants in industrial products and processes, how these principles are used to select surfactants for use in a variety of industrial applications, and tables of surfac

337

Validation of the strain index: poultry processing  

E-Print Network (OSTI)

The primary aim of this study was to evaluate the predictive validity of the Strain Index and compare it to predictions based on the presence of generic risk factors within turkey processing. Data was gathered and a Strain Index Score was assigned to a total of 56 jobs-by-sides at a turkey A job was classified as 'problem' or 'safe' based on the presence or absence of a generic risk factor. The morbidity classification for jobs-by-sides was 'positive' if there was at least one recorded distal upper extremity disorder corresponding to that job and that side of the body and 'negative' if no such disorders were recorded. The Strain Index classified 39 jobs-by-sides as 'problem' and 17 as 'safe.' Forty-two of the jobs-by-sides were 'positive.' Among categorical variables, intensity of exertion, duration of exertion, hand/wrist posture, speed of work, and duration per day ratings were significantly greater for 'problem' jobs-by-sides compared to 'safe' jobs-by-sides. Among continuous variables, the percent duration of exertion processing facility. The hazard classification for a job was 'problem' if the Strain Index Score was five or greater and 'safe' if the Strain Index score was less than five. The generic risk factors considered in this study included repetitiveness, pinch grasp, hand - arm vibration, and cold temperature. The Strain Index Scores were significantly greater for 'problem' jobs-by-sides compared to 'safe' jobs-by-sides. The Strain Index ratings for intensity of exertion, duration of exertion, and duration per day were significantly greater for 'positive' jobs compared to 'negative' jobs. Among continuous variables, percent duration of exertion, production cycle time, and the Strain Index Score were significantly greater for 'positive' compared to 'negative' jobs-by-sides. Two generic risk factors, cold temperature and pinch grasp, were negatively associated with morbidity. As a screening tool to identify 'positive' versus 'negative' jobs-by-sides in this study, the Strain Index methodology had a sensitivity of 86%, specificity of 79%, positive predictive value 92%, and negative predictive value of 65%. The results of this study concur with the Strain Index methodology that exertional demands of a task best explain the occurrence of distal upper extremity disorders within a job.

Knox, Kristine Renee

2000-01-01T23:59:59.000Z

338

Ceramic Industries, Non-ferrous  

E-Print Network (OSTI)

• Refractory applications for the steel, non-ferrous and cement industry • Refractory applications for the ceramic, petrochemical and other industry • Raw materials for refractories • User’s points of view • Quality and Environment • Processes, equipment and controls • Development of refractory products

Refractories For Iron; Hydrocarbon Waste Incineration Pulp

2005-01-01T23:59:59.000Z

339

Index of /2006_SNAPCollab  

NLE Websites -- All DOE Office Websites (Extended Search)

SNAPCollab SNAPCollab Icon Name Last modified Size Description [DIR] Parent Directory - [ ] Agenda.pdf 07-Sep-2007 17:56 9.7K [ ] Lab-UCB-map.pdf 07-Sep-2007 17:56 479K [TXT] RegistrationList.htm 07-Sep-2007 17:56 26K [ ] RegistrationList.pdf 07-Sep-2007 17:56 48K [ ] collab_meeting-8-1_c..> 07-Sep-2007 17:56 121K [IMG] collab_meeting-8.png 07-Sep-2007 17:56 180K [IMG] collab_meeting-9.png 07-Sep-2007 17:56 33K [DIR] hotel_files/ 07-Sep-2007 17:56 - [TXT] hotels.htm 07-Sep-2007 17:56 8.6K [ ] hotels.pdf 07-Sep-2007 17:56 1.2M [TXT] index.htm 07-Sep-2007 17:56 18K

340

prairie restoration index  

NLE Websites -- All DOE Office Websites (Extended Search)

Purpose Purpose This is the first section of a "How to" guide designed for those individuals interested in restoring an area of land back to native prairie. To better facilitate your search for specific information, select one or all of the main topics associated with prairie parcel restoration listed below. Index History/Introduction of Prairie Restoration Selecting a Site Starting/Planning Seedbed Preparation. Seed (Amount, Acquiring and Preparation) Planting Watering General Identification (Grasses, Forbs, Flowers, Keeping Track) Burning - Enriching Reference Materials, Burning Permit and Seed Sources Information Identification Keys - Grasses and Forbs Illustrated Guide to Native Prairie Species Watch List for Native Prairie Plants This report was written by Lawrence Cwik as part of his participation in

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Solar index generation and delivery  

DOE Green Energy (OSTI)

The Solar Index, or, more completely defined as the Service Hot Water Solar Index, was conceptualized during the spring of 1978. The purpose was to enhance public awareness to solar energy usability. Basically, the Solar Index represents the percentage of energy that solar would provide in order to heat an 80 gallon service hot water load for a given location and day. The Index is computed by utilizing SOLCOST, a computer program, which also has applications to space heating, cooling, and heat pump systems and which supplies economic analyses for such solar energy systems. The Index is generated for approximately 68 geographic locations in the country on a daily basis. The definition of the Index, how the project came to be, what it is at the present time and a plan for the future are described. Also presented are the models used for the generation of the Index, a discussion of the primary tool of implementation (the SOLCOST program) and future efforts.

Lantz, L.J.

1980-01-01T23:59:59.000Z

342

Ohio State's industry research partnerships  

E-Print Network (OSTI)

, in such critical projects as conversion of biomass to alternative energy and the creation of nanomaterials across the nation by enhancing industry productivity, generating jobs, and increasing revenues. 9 1 92 4

343

Industrial Uses of Vegetable Oils  

Science Conference Proceedings (OSTI)

Industrial Uses of Vegetable Oils offers new insights into these important (and growing) products of vegetable oils, while also covering developments in biodegradable grease, vegetable oils-based polyols, and the synthesis of surfactants from vegetable oil

344

First biomass conference of the Americas: Energy, environment, agriculture, and industry. Proceedings, Volume 3  

DOE Green Energy (OSTI)

This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this third volume deal with Environmental Issues, Biomass Energy System Studies, and Biomass in Latin America. Concerning Environmental Issues, the following topics are emphasized: Global Climate Change, Biomass Utilization, Biofuel Test Procedures, and Commercialization of Biomass Products. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Not Available

1993-10-01T23:59:59.000Z

345

Production  

E-Print Network (OSTI)

There are serious concerns about the greenhouse gas (GHG) emissions, energy and nutrient and water use efficiency of large-scale, first generation bio-energy feedstocks currently in use. A major question is whether biofuels obtained from these feedstocks are effective in combating climate change and what impact they will have on soil and water resources. Another fundamental issue relates to the magnitude and nature of their impact on food prices and ultimately on the livelihoods of the poor. A possible solution to overcome the current potentially large negative effects of large-scale biofuel production is developing second and third generation conversion techniques from agricultural residues and wastes and step up the scientific research efforts to achieve sustainable biofuel production practices. Until such sustainable techniques are available governments should scale back their support for and promotion of biofuels. Multipurpose feedstocks should be investigated making use of the bio-refinery concept (bio-based economy). At the same time, the further development of non-commercial, small scale

Science Council Secretariat

2008-01-01T23:59:59.000Z

346

Federal Energy Management Program: Covered Product Category:...  

NLE Websites -- All DOE Office Websites (Extended Search)

Covered Product Category: Industrial Luminaires to someone by E-mail Share Federal Energy Management Program: Covered Product Category: Industrial Luminaires on Facebook Tweet...

347

Innovation and the big builders : barriers to integrating sustainable design and construction practices into the production homebuilding industry : the case of Pulte Homes  

E-Print Network (OSTI)

The homebuilding industry has held a dominant presence in the U.S. economy over the past century. It has been a source of profit, shelter and jobs for countless Americans. In order to meet the needs of an ever-burgeoning ...

Pauly, Justin T. (Justin Talbott)

2005-01-01T23:59:59.000Z

348

The following are appendices A, B1 and B2 of our paper, "Integrated Process Modeling and Product Design of Biodiesel Manufacturing", that appears in the Industrial and  

E-Print Network (OSTI)

Design of Biodiesel Manufacturing", that appears in the Industrial and Engineering Chemistry Research a Biodiesel Process Model To access NIST TDE Data Engine in Aspen Plus version 2006.5 or V7.0 Step 1. Enter of a specific property, eq. Liquid Density #12;4 Appendix B Prediction Methods and NIST TDE Equations

Liu, Y. A.

349

ET Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ET Industries, Inc. ET Industries, Inc. (showerheads) Issued: May 24, 2013 BEFORE THE U.S. DEPARTMENT OF ENERGY Washington, D.C. 20585 ) ) ) ) ) Case Number: 2012-SE-2902 AMENDED NOTICE OF NONCOMPLIANCE DETERMINATION 1 Manufacturers (including importers) are prohibited from distributing covered products in the United States that do not comply with applicable federal water conservation standards. See 10 C.F.R. §§ 429.5, 429.102; 42 U.S.C. §§ 6291(10), 6302. On April 3, 2012, DOE tested one unit of the "ThunderHead" showerhead basic model ("basic model TH-1 " 2 ), which ET Industries, Inc. ("ET") imported into the United States. On April 24, 2012, DOE completed testing of three additional units of basic model TH-1, also imported into

350

EIA - 2010 International Energy Outlook - Industrial  

Gasoline and Diesel Fuel Update (EIA)

Industrial Industrial International Energy Outlook 2010 Industrial Sector Energy Consumption Worldwide industrial energy consumption increases by 42 percent, or an average of 1.3 percent per year, from 2007 to 2035 in the IEO2010 Reference case. Ninety-five percent of the growth occurs in non-OECD nations. Overview The world's industries make up a diverse sector that includes manufacturing, agriculture, mining, and construction. Industrial energy demand varies across regions and countries, depending on the level and mix of economic activity and technological development, among other factors. Energy is consumed in the industrial sector for a wide range of activities, such as processing and assembly, space conditioning, and lighting. Industrial energy use also includes natural gas and petroleum products used as feedstocks to produce non-energy products, such as plastics. In aggregate, the industrial sector uses more energy than any other end-use sector, consuming about one-half of the world's total delivered energy.

351

Plastic Magen Industry | Open Energy Information  

Open Energy Info (EERE)

plastic products with a lifetime guarantee, including the Heliocol and Sunstar-brand solar water heating systems. References Plastic Magen Industry1 LinkedIn Connections...

352

Advanced Energy Industries Inc | Open Energy Information  

Open Energy Info (EERE)

Fort Collins, Colorado Zip 80525 Sector Solar Product US-based manufacturer of power conversion and control systems for the semiconductor and solar industries. The company also...

353

Globalization of Innovation: The Personal Computing Industry  

E-Print Network (OSTI)

industry as most production has moved offshore. Much ofengineering work has moved offshore as well, yet the totalend engineering was done offshore. Today, Apple dominates in

Dedrick, Jason; Kraemer, Kenneth L

2007-01-01T23:59:59.000Z

354

Guide to Industrial Control Systems (ICS) Security  

Science Conference Proceedings (OSTI)

... location for industries such as oil refineries, water and ... that could potentially affect oil and natural gas production, refinery operations, water ...

2013-05-13T23:59:59.000Z

355

Nanotechnology for Energy, Environment, Electronics and Industry  

Science Conference Proceedings (OSTI)

The benefits can range from higher system properties and energy efficiency, to innovative healthcare solutions, to advanced industry products and solutions.

356

Nanotechnology for Energy, Environment, Healthcare and Industry  

Science Conference Proceedings (OSTI)

The benefits can range from higher system properties and energy efficiency, to innovative healthcare solutions, to advanced industry products and solutions.

357

The State of the Indian Steel Industry  

Science Conference Proceedings (OSTI)

... domestic demand, their competitive position in respect of cost of production, ... In this paper a forecast of the Indian steel industry in the coming five years will ...

358

XH Industries Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Jump to: navigation, search Name XH Industries Inc Place Ilwaco, Washington, DC Zip 98624-9046 Sector Wind energy Product Washington-based repairer of wind power...

359

Jeff Cornett Manager, Industrial and Economic Development  

NLE Websites -- All DOE Office Websites (Extended Search)

and numerous chemical industry clients such as chemical manufacturers, oil & gas refineries, paper product manufacturers, and special material manufacturers assisting them with...

360

Alten Industries Inc | Open Energy Information  

Open Energy Info (EERE)

Industries Inc Place Baltimore, Maryland Zip 21218 Product Maryland-based integrated alternative energy development corporation dedicated to supporting a viable domestic...

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Longjitaihe Industry Group | Open Energy Information  

Open Energy Info (EERE)

Zip 7400 Sector Solar Product Chinese real estate developer foraying into solar PV projects. References Longjitaihe Industry Group1 LinkedIn Connections CrunchBase Profile No...

362

Industrial Wastewater Minimization in the Chemicals and Petroleum Industries Industry Technology Commentary  

Science Conference Proceedings (OSTI)

Although water is employed in all major industries, the chemicals and petroleum industries stand out as relying on a vast amount of water for their production needs. In the petroleum industry, more than half of the water is used for cooling, followed by boiler feed (roughly one-third), and then process and other uses. In the chemicals industry, the majority of water is used for cooling, followed by process applications, and then boiler and other uses. Both of these market segments have made great strides...

2011-03-31T23:59:59.000Z

363

Industry Profile | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industry Profile Industry Profile Industry Profile November 1, 2013 - 11:40am Addthis The largest energy consuming industrial sectors account for the largest share of CHP capacity; namely: Chemicals (30%), Petroleum Refining (17%), and Paper Products (14%). Other industrial sectors include: Commercial/Institutional (12%), Food (8%), Primary Metals (5%), Other Manufacturing (8%), and Other Industrial (6%). Combined heat and power (CHP)-sometimes referred to as cogeneration-involves the sequential process of producing and utilizing electricity and thermal energy from a single fuel. CHP is widely recognized to save energy and costs, while reducing carbon dioxide (CO2) and other pollutants. CHP is a realistic, near-term option for large energy efficiency improvements and significant CO2 reductions.

364

Solar production of industrial process steam ranging in temperature from 300/sup 0/F to 550/sup 0/F (Phase I). Volume 1. Final report, September 30, 1978-June 30, 1979  

DOE Green Energy (OSTI)

This section summarizes the Foster Wheeler Development Corporation/Dow Chemical Company Phase I solar industrial process steam system and includes a system schematic, a brief system description, general specifications of the major system components, expected system performance, and a cost estimate summary for Phases II and III. The objectives of Phase I are: (1) design a cost-effective solar steam generating system, using state-of-the-art components and technology, to supply steam for Dow Chemical Company's Dalton, Georgia, plant; (2) predict the performance of the solar process steam plant; (3) conduct a safety evaluation and an environmental impact assessment of the solar steam system; (4) conduct an economic analysis to determine the potential economic benefits of a solar-augmented process steam production system compared with an existing fossil-fuel-fired steam generator; and (5) promote the project extensively to make it visible to industry and the general public.

Not Available

1979-06-30T23:59:59.000Z

365

Associations and Industry - TMS  

Science Conference Proceedings (OSTI)

... Associations and Industry, Research Programs, ==== Basic Metallurgy ==== ... FORUMS > ASSOCIATIONS AND INDUSTRY, Replies, Views, Originator, Last ...

366

Case Study Impact Evaluations of the Industrial Energy Savings Plan  

E-Print Network (OSTI)

This paper presents the results of a series of five case study impact evaluations of Energy Savings Plan (ESP) industrial energy efficiency projects funded by the Bonneville Power Administration (BPA) and Seattle City Light (City Light). These industrial sector evaluations are among the first in the Pacific Northwest to evaluate both energy and non-energy effects. The projects chosen for evaluation cover a wide range of industrial processes and end-uses. Each industrial setting, the efficiency measures installed and the processes affected are described in this paper. The report presents energy (kWh) and peak demand (kW) savings indexed to changes in production volume, an assessment of non-energy benefits to the participating customer, and cost-effectiveness analyses from four stakeholder perspectives. Levelized cost (expressed in cents per kWh) and benefit-cost ratios were calculated for each project, both including and excluding quantifiable energy non-energy benefits. A summary of conclusions and lessons learned is also provided. The evaluation team included Patrick Lilly of Regional Economic Research Inc., Paresh Parekh of Unicade Inc., D'Arcy Swanson of Pacific Sciences Inc., and Dennis Pearson at Seattle City Light.

Lilly, P.; Pearson, D.

1999-05-01T23:59:59.000Z

367

Complexity index indicates refinery capability, value  

Science Conference Proceedings (OSTI)

Refinery size usually is measured in terms of distillation capacity. Relative size, however, can be measured using refinery complexity--a concept developed by W.L. Nelson in the 1960s. Nelson developed the complexity index to quantify the relative cost of components that make up a refinery. It is a pure cost index that provides a relative measure of the construction costs of a particular refinery based on its crude and upgrading capacity. The Nelson index compares the costs of various upgrading units--such as a fluid catalytic cracking (FCC) unit or a catalytic reformer--to the cost of a crude distillation unit. Computation of the index is an attempt to quantify the relative cost of a refinery based on the added cost of various upgrading units and the relative upgrading capacity. A review of complexity calculations, and an explanation of how indices have changed, provide a simple means of determining the complexity of single refineries or refining regions. The impact of complexity on product slate is also examined in this paper.

Johnston, D. [Daniel Johnston and Co. Inc., Dallas, TX (United States)

1996-03-18T23:59:59.000Z

368

Specifications to Improve Power Quality Immunity in Electronic Systems for Industrial Applications: Suggestions for Higher Quality a nd Lower Cost Production  

Science Conference Proceedings (OSTI)

The goal of the work described in this report is to provide suggestions for a specification language that will allow end-users to integrate successfully electronic industrial equipment with the existing electrical systems. Cost effective solutions to improve system reliability and performance are specifically addressed. The intention is to eliminate disruptions induced by power quality-related problems and incompatibilities between process equipment and the electrical environment. Most of these technique...

2000-11-02T23:59:59.000Z

369

Evolution of industrial automation  

Science Conference Proceedings (OSTI)

Automation has been of high priority for the manufacturing sector, from Ford's first set of Model-T Assembly lines in the early 1920s to the modern factory floor. With appropriate automation, the aim was to rationalise the production and keep ... Keywords: Ethernet, architecture, automated manufacturing, bus topology, control servers, distributed control, economies of scale, embedded intelligence, functionality, fuzzy logic, global village, graphic panel, industrial automation, networking, networks

R. Murugesan

2006-03-01T23:59:59.000Z

370

Lessons Learned Quarterly Report Cumulative Index | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

& Requirements Lessons Learned Lessons Learned Quarterly Report Cumulative Index Lessons Learned Quarterly Report Cumulative Index Guidance Requirements Lessons...

371

Thailand: Petroleum and natural gas industry profile. Export trade information  

SciTech Connect

The report profiles the petroleum, natural gas, and petrochemical industries in Thailand. It covers: exploration production, consumption, trade, pipelines, industry structure, national energy policy, product marketing, refining, conservation/environmental issues, alternative energy sources, prices, transportation, and commercial opportunities.

1992-06-11T23:59:59.000Z

372

Industrial energy-efficiency-improvement program  

SciTech Connect

Progress made by industry toward attaining the voluntary 1980 energy efficiency improvement targets is reported. The mandatory reporting population has been expanded from ten original industries to include ten additional non-targeted industries and all corporations using over one trillion Btu's annually in any manufacturing industry. The ten most energy intensive industries have been involved in the reporting program since the signing of the Energy Policy and Conservation Act and as industrial energy efficiency improvement overview, based primarily on information from these industries (chemicals and allied products; primary metal industry; petroleum and coal products; stone, clay, and glass products; paper and allied products; food and kindred products; fabricated metal products; transportation equipment; machinery, except electrical; and textile mill products), is presented. Reports from industries, now required to report, are included for rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products. Additional data from voluntary submissions are included for American Gas Association; American Hotel and Motel Association; General Telephone and Electronics Corporation; and American Telephone and Telegraph Company. (MCW)

1980-12-01T23:59:59.000Z

373

XI. Index of Primary Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

XI Index of Primary Contacts XI Index of Primary Contacts A Aaron, Tim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Aceves, Salvador M. . . . . . . . . . . . . . . . . . . . . . .186 Adams, Stephen. . . . . . . . . . . . . . . . . . . . . . . . . .713 Adzic, Radoslav. . . . . . . . . . . . . . . . . . . . . . . . . .384 Ahluwalia, Rajesh K.. . . . . . . . . . . . . . . . . . . . . .511 Ahmed, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .451 Ahn, Channing. . . . . . . . . . . . . . . . . . . . . . .262, 267 Alam, Mohammad S.. . . . . . . . . . . . . . . . . . . . . .509 Andersen, Cindi. . . . . . . . . . . . . . . . . . . . . . . . . .811 Anton, Donald L.. . . . . . . . . . . . . . . . . . . . .230, 243 Arduengo III, Anthony J. . . . . . . . . . . . . . . . . . .274

374

Carbon Emissions: Chemicals Industry - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

... is sequestered in chemical industry products, such as plastics and fertilizers, rather than emitted through combustion. [Energy ...

375

The Many Aspects of Measuring Sustainability - An Industry ...  

Science Conference Proceedings (OSTI)

Symposium, Sustainable Materials Processing and Production. Presentation Title , The Many Aspects of Measuring Sustainability - An Industry Perspective.

376

A comparison of the glycemic index of sorghum and other commonly consumed grains.  

E-Print Network (OSTI)

??Little in vivo research on glycemic index (GI) values or the digestive impact of sorghum based food products currently exists. Because sorghum is a gluten-free… (more)

Pruett, Ashley

2012-01-01T23:59:59.000Z

377

VAWT Industries Inc | Open Energy Information  

Open Energy Info (EERE)

Zip 89118 Sector Wind energy Product Focused on design, production, and marketing of wind turbines in the 0.1-0.5MW range. References VAWT Industries Inc1 LinkedIn...

378

Assessment of Industrial-Sector Load Shapes  

Science Conference Proceedings (OSTI)

The load shapes of industrial-sector customers are becoming increasingly important for utility forecasting, marketing, and demand-side management planning and evaluation activities. This report analyzes load shapes for various industry segments and investigates the transfer of these load shapes across service territories. This report is available only to funders of Program 101A or 101.001. Funders may download this report at http://my.primen.com/Applications/DE/Community/index.asp .

1993-02-18T23:59:59.000Z

379

Buildings Energy Data Book: 2.7 Industrialized Housing (IH)  

Buildings Energy Data Book (EERE)

5 2004 Number of Industrialized Housing Manufacturers Versus Production (Stick-Builders) Companies Type Panelized Modular (1) HUD-Code Production Builders Component Manufacturers...

380

May 12, 2011, Visiting Speakers Program Events - Aerospace Industry...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

work (2011) Aerospace Industries Association of America, Inc. Definition from AIA white paper Definition: - Counterfeit product or part: A product produced or altered...

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Treatment and Minimization of Aluminum and Light Metals Industry ...  

Science Conference Proceedings (OSTI)

3:15 pm. PRODUCTION OF VALUE-ADDED PRODUCTS THROUGH PHOSPHATE STABILIZATION OF ALUMINUM INDUSTRY WASTE: Arun S. Wagh, Energy ...

382

Biomass Energy Production Incentive | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Production Incentive Biomass Energy Production Incentive Eligibility Agricultural Commercial Industrial Savings For Bioenergy Commercial Heating & Cooling Manufacturing Buying &...

383

Solar Index generation and delivery  

DOE Green Energy (OSTI)

The Solar Index, more completely defined as the Service Hot Water Solar Index, was conceptualized during the spring of 1978 with direction from a US Government interoffice agency committee which was headed by the Department of Energy. The purpose was to enhance public awareness of solar energy usability. Basically, the Solar Index represents the percentage of energy that solar would provide in order to heat an 80-gallon service hot water load for a given location and day. The Index is computed by utilizing SOLCOST, a computer program, which in addition to solar service hot water systems, has the ability to estimate thermal performance of space heating, cooling, and heat pump systems. It also supplies economic analyses for these solar energy systems. The Index is generated daily for most large metropolitan locations in the country. The definition of the Index, how the project came to be, what it is at the present time, and a plan for the future are presented. Also presented are the models used for the generation of the Index, a discussion of the primary tool of implementation (the SOLCOST Program), and future efforts.

Lantz, L.J.

1980-01-01T23:59:59.000Z

384

Industry/Utility Partnerships: Formula for Success  

E-Print Network (OSTI)

Industry/utility partnerships are created when both parties work productively toward common goals. American industry faces tough global competition and to be successful must create and operate modern production facilities. Cost and energy efficient electrotechnologies play a critical role in their competitiveness. Utilities can play a central role in industrial competitiveness, not only by providing competitively priced and reliable power, but also by helping their customers to identify and implement the most appropriate technologies. When the correct environment is created, both win. Industry reduces costs and produces high quality products. The utility gains customer loyalty and achieves business success.

Smith, W. R.; Spriggs, H. D.

1995-04-01T23:59:59.000Z

385

AN ECONOMETRIC ANALYSIS OF ZAMBIAN INDUSTRIAL ELECTRICITY DEMAND.  

E-Print Network (OSTI)

??The purpose of this thesis is twofold: to examine the electricity use in Zambia’s mining industry by focusing on own-price, cross price and index of… (more)

Chama, Yoram Chama

2012-01-01T23:59:59.000Z

386

Prediction of leaf area index in almonds by vegetation indexes  

Science Conference Proceedings (OSTI)

Three levels of scale for determining leaf area index (LAI) were explored within an almond orchard of alternating rows of Nonpareil and Monterey varieties using hemispherical photography and mule lightbar (MLB) at ground level up to airborne and satellite ... Keywords: Canopy light interception, EVI, GMI, LADP, LAI, Leaf area index, MASTER, MCARI, MLB, Multispectral indices, NDVI, NDWI, RMSE, SR, VI, Vegetation indices, fPAR

Jose L. Zarate-Valdez; Michael L. Whiting; Bruce D. Lampinen; Samuel Metcalf; Susan L. Ustin; Patrick H. Brown

2012-07-01T23:59:59.000Z

387

Transforming the Freight Industry  

E-Print Network (OSTI)

Transforming the Freight Industry From Regulation to Icommon-carrier freight industry was Competition to backwardjourneys. When the freight industry was deregulated, it was

Regan, Amelia

2002-01-01T23:59:59.000Z

388

Demographics and industry returns  

E-Print Network (OSTI)

Demographics and Industry Returns By Stefano DellaVigna andand returns across industries. Cohort size fluc- tuationspredict profitability by industry. Moreover, forecast demand

Pollet, Joshua A.; DellaVigna, Stefano

2007-01-01T23:59:59.000Z

389

Environmental Issues in the Meat Processing Industry  

Science Conference Proceedings (OSTI)

Meat processing is a $100 billion per year business in the United States. The industry produces wholesale and retail cuts of raw meat and poultry, as well as prepared meat products such as sausages, along with meat by-products such as rendered fats and oils. The most significant environmental issue for the industry is food safety, the prevention of contamination by pathogenic organisms such as Salmonella and E. coli. The industry is subject to significant regulatory oversight by federal and state agencie...

2001-12-17T23:59:59.000Z

390

Electronics Industry: Markets & Issues  

NLE Websites -- All DOE Office Websites (Extended Search)

Electronics Industry: Markets & Issues Electronics Industry: Markets & Issues Speaker(s): William M. Smith Date: March 17, 1998 - 12:00pm Location: 90-3148 Seminar Host/Point of Contact: Richard Sextro Electronics represents a unique opportunity to get in on the beginning of an incredible growth spurt, for an already huge industry; $400 billion/year in the U.S. now, moving up by 10%-20% per year in several sectors. This is quite unlike many other U.S. industrial sectors, which often involve mature businesses requiring assistance to stay afloat. The potential for forming business partnerships with electronics firms to deal with issues in energy efficiency, water availability/quality, air quality, productivity/yield, HVAC, power quality, wastewater, air emissions, etc., is staggering. The industrys oligopic nature provides serious opportunities

391

Site Index | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Index Index SHARE ORNL from A to Z User Fa A B C D E F G H I J K L M N O P Q R S T U V W X Y Z This alphabetical index includes links to commonly requested information resources on ORNL's public webservers. Use the alphabetical links below to navigate quickly through the index. If you can't find what you need here, try the Search page. A Accounts Payable Acrobat Reader Software Agricola (agriculture database) Air Quality Conditions and Forecast Airport - Knoxville American Institute of Chemical Engineers American Museum of Science and Energy (AMSE) AmeriFlux Network Annual Review Series ASER - Oak Ridge Reservation Annual Site Environmental Report Ask a Librarian! - email ORNL Library Atmospheric Radiation Measurement (ARM) Archive Atomic Trades and Labor Council Automated External Defibrillator Locations

392

Project Definition Rating Index (PDRI)  

Energy.gov (U.S. Department of Energy (DOE))

The Office of Environmental Management (EM) Project Definition Rating Index (EM-PDRI) is a modification of a commercially developed planning tool that has been tested by an EM team specifically for...

393

Winter_2009_Index.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

OF FOSSIL ENERGY, U.S. DEPARTMENT OF ENERGY * ISSUE NO. 82, WINTER 2009 A NEWSLETTER ABOUT INNOVATIVE TECHNOLOGIES FOR COAL UTILIZATION ANNUAL INDEX OF ARTICLES Clean Coal Today...

394

The structural preconditions for maximizing FDI spillovers in Colombia : a sectoral impact analysis of Foreign Direct Investment (FDI) on Industry output, labor payments, firm productivity, and the productive structure (1995-2009)  

E-Print Network (OSTI)

Do multinational corporations (MNCs) crowd out domestic firms in developing countries, or is foreign direct investment (FDI) complementary to domestic firm profitability, productivity, and employment? Empirical literature ...

Hyman, Benjamin G. (Benjamin Gabriel)

2011-01-01T23:59:59.000Z

395

Industry Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

idatech.com idatech.com info@idatech.com 63065 NE 18 th Street Bend, OR 97701 541.383.3390 Industry Perspective Biogas and Fuel Cell Workshop National Renewable Energy Laboratory June 11 - 13, 2012 Mike Hicks Chairman of the Board of Directors, FCHEA Treasurer of the Board of Directors, FCS&E Engineering Manager, Technology Development & Integration, IdaTech Outline 1. Critical Factors * Fuel Purity * Fuel Cost 2. Natural Gas - The Wild Card & Competition 3. IdaTech's Experience Implementing Biofuel Critical Factor - Fuel Purity All fuel cell system OEMs have fuel purity specifications * Independent of * Raw materials or feed stocks * Manufacturing process * Depends on * Fuel processor technology * Fuel cell technology - low temp PEM versus SOFC

396

Home Page > Business > Industrial > Global Trade Of Wood Chips Down 26% In 2009 As Pulpmills Reduce Production Worldwide, Reports Wood Resources International  

E-Print Network (OSTI)

Poster Explore Strategies in Technical Analysis from Experienced Brokers. www.Lind-Waldock.com , USA financial crises and the reduced demand for paper products worldwide. This year, only an estimated 25 worldwide, European demand for pellets and biomass chips, outlook for plantation wood chip supply, ocean

397

Industrial Boilers  

E-Print Network (OSTI)

This report has been peer and administratively reviewed by the U.S. Environmental Protection Agency, and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use. Southern Research Institute/US EPA

Evaluation Biomass; Co-firing Industrial; Technology Type; Renewafuels Pelletized; Wood Fuel

2008-01-01T23:59:59.000Z

398

Industrial - Utility Cogeneration Systems  

E-Print Network (OSTI)

Cogeneration may be described as an efficient method for the production of electric power in conjunction with process steam or heat which optimizes the energy supplied as fuel to maximize the energy produced for consumption. In a conventional electric utility power plant, considerable energy is wasted in the form of heat rejection to the atmosphere thru cooling towers, ponds or lakes, or to rivers. In a cogeneration system heat rejection can be minimized by systems which apply the otherwise wasted energy to process systems requiring energy in the form of steam or heat. Texas has a base load of some 75 million pounds per hour of process steam usage, of which a considerable portion could be generated through cogeneration methods. The objective of this paper is to describe the various aspects of cogeneration in a manner which will illustrate the energy saving potential available utilizing proven technology. This paper illustrates the technical and economical benefits of cogeneration in addition to demonstrating the fuel savings per unit of energy required. Specific examples show the feasibility and desirability of cogeneration systems for utility and industrial cases. Consideration of utility-industrial systems as well as industrial-industrial systems will be described in technical arrangement as well as including a discussion of financial approaches and ownership arrangements available to the parties involved. There is a considerable impetus developing for the utilization of coal as the energy source for the production of steam and electricity. In many cases, because of economics and site problems, the central cogeneration facility will be the best alternative for many users.

Harkins, H. L.

1979-01-01T23:59:59.000Z

399

Office of Industrial Technologies: Industry partnerships  

SciTech Connect

US industries are making progress in turning the vision of the future into reality: More effective competition in global markets, increased industrial efficiency, more jobs, reduced waste generation and greenhouse gas emissions (to 1990 levels), improved environment. DOE`s Office of Industrial Technologies is catalyzing and supporting industry progress in many ways. This pamphlet gives an overview of OIT.

1995-04-01T23:59:59.000Z

400

Office of Industrial Technologies research in progress  

DOE Green Energy (OSTI)

The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

Not Available

1993-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Solar production of industrial process steam. Phase III. Operation and evaluation of the Johnson and Johnson solar facility. Final report, January 1, 1980-March 31, 1981  

DOE Green Energy (OSTI)

A solar facility that generates 177/sup 0/C (350/sup 0/F) process steam has been designed and constructed by Acurex Corporation and has operated for 1 yr supplying steam to the Johnson and Johnson manufacturing plant in Sherman, Texas. The facility consists of 1068 m/sup 2/ (11,520 ft/sup 2/) of parabolic trough concentrating collectors, a 18,900 1 (5000 gal) flash boiler, and an 18.6 kW (25 hp) circulating pump. In the first year of operation the system was available 97 percent of the days, and with sufficient solar radiation available it operated 70 percent of the days during this period. The measured data showed that the collector field operated at an efficiency of 25.4 percent for the year, and that at least 75 percent of the energy reaching the flash boiler was delivered to the plant as steam. A total of 309,510 kg (682,400 lb) of steam was produced by the solar facility for the first year. An analysis of the data showed that the delivered energy was within 90 to 100 percent of the predicted value. The successful completion of the first year of operation has demonstrated the technical feasibility of generating industrial process steam with solar energy.

Brink, D.F.; Kendall, J.M.; Youngblood, S.B.

1981-03-01T23:59:59.000Z

402

Orion Bus Industries | Open Energy Information  

Open Energy Info (EERE)

Bus Industries Bus Industries Jump to: navigation, search Name Orion Bus Industries Place Ontario, Canada Information About Partnership with NREL Partnership with NREL Yes Partnership Type Other Relationship Partnering Center within NREL Transportation Technologies and Systems Partnership Year 2001 Link to project description http://www.nrel.gov/news/press/2002/3002_hybird_buses.html LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Orion Bus Industries is a company located in Ontario, Canada. References Retrieved from "http://en.openei.org/w/index.php?title=Orion_Bus_Industries&oldid=381704" Categories: Clean Energy Organizations Companies Organizations What links here Related changes Special pages Printable version Permanent link Browse properties

403

Indexes to Nuclear Regulatory Commission Issuances  

SciTech Connect

Digests and indexes for issuances of the Commission (CLI), the Atomic Safety and licensing Board Panel (LBP), the Administrative Law Judges (ALJ) the Directors` Decisions (DD), and the Decisions on Petitions for Rulemaking (DPRM) are presented in this document. These digests and indexes are intended to serve as a guide to the issuances. Information elements are displayed in one or more of five separate formats arranged as follows: Case Name Index; Headers and Digests; Legal Citations Index; Subject Index; and Facility Index.

NONE

1996-12-31T23:59:59.000Z

404

2008 Industrial Technologies Market Report, May 2009  

SciTech Connect

The industrial sector is a critical component of the U.S. economy, providing an array of consumer, transportation, and national defense-related goods we rely on every day. Unlike many other economic sectors, however, the industrial sector must compete globally for raw materials, production, and sales. Though our homes, stores, hospitals, and vehicles are located within our borders, elements of our goods-producing industries could potentially be moved offshore. Keeping U.S. industry competitive is essential to maintaining and growing the U.S. economy. This report begins with an overview of trends in industrial sector energy use. The next section of the report focuses on some of the largest and most energy-intensive industrial subsectors. The report also highlights several emerging technologies that could transform key segments of industry. Finally, the report presents policies, incentives, and drivers that can influence the competitiveness of U.S. industrial firms.

Energetics; DOE

2009-07-01T23:59:59.000Z

405

Identifying Opportunities for Industrial Energy Conservation  

E-Print Network (OSTI)

The Energy Productivity Center of the Mellon Institute is engaged in a 2-year study to identify opportunities for improved U.S. industrial energy productivity. A distinguishing feature is the focus on energy services provided when fuels are consumed. The paper describes the Center's Least-Cost Energy Strategy, the Industrial Energy Productivity Project, and presents least-cost results for 1978 and for energy markets over the next two decades.

Hoffman, A. R.

1981-01-01T23:59:59.000Z

406

Microsoft Word - Final Newsletter Index.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

ANNUAL INDEX SEQUESTRATION IN THE NEWS .............................................................................. 1 SEQUESTRATION POLICY & TRADING ............................................................... 11 SEQUESTRATION EVENTS & ANNOUNCEMENTS ............................................ 16 SEQUESTRATION PUBLICATIONS......................................................................... 17 SEQUESTRATION LEGISLATION ........................................................................... 24 INDEX.............................................................................................................................. 25 CONTACT INFORMATION........................................................................................ 28

407

Assistance to Oil and Gas State Agencies and Industry through Continuation of Environmental and Production Data Management and a Water Regulatory Initiative  

SciTech Connect

This grant project was a major step toward completion of the Risk Based Data Management System (RBDMS) project. Additionally the project addresses the needs identified during the projects initial phases. By implementing this project, the following outcomes were sought: (1) State regulatory agencies implemented more formalized environmental risk management practices as they pertain to the production of oil and gas, and injection via Class II wells. (2) Enhancement of oil and gas production by implementing a management system supporting the saving of abandoned or idle wells located in areas with a relatively low environmental risk of endangering underground sources of drinking water (USDWs) in a particular state. (3) Verification that protection of USDWs is adequate and additional restrictions of requirements are not necessary in areas with a relatively low environmental risk. (4) Standardization of data and information maintained by state regulatory agencies and decrease the regulatory cost burden on producers operating in multiple states, and (5) Development of a system for electronic data transfer among operators and state regulatory agencies and reduction of overall operator reporting burdens.

Grunewald, Ben; Arthur, Dan; Langhus, Bruce; Gillespie, Tom; Binder, Ben; Warner, Don; Roberts, Jim; Cox, D.O.

2002-05-31T23:59:59.000Z

408

Industrial Use of Infrared Inspections  

E-Print Network (OSTI)

Infrared is and has been an established technology in the military and aerospace fields. However, only relatively recently has this technology found a "use" in the industrial sector. Many reasons exist why the technology has not been used, but in the final analysis it comes down to the fact that the industrial management responsible for the operations and production budgets did not, and in many cases, still does not understand the economic benefits to the company that infrared industrial inspections can bring about. Over the last 2-3 years a number of articles have appeared in various industrial publications concerning infrared surveys. However, all of the articles have dealt with the technical aspects of infrared inspections, with the economics either completely neglected or mentioned only in passing. I believe that in the real industrial world it is the economic benefits of a technology that allow the product of that technology to reach the market and become a success, and not the fact that a technology is useful per se. In this presentation, I shall be focusing primarily on the major economic aspects of the surveys and what the end results really represent in terms of economic benefits. Once the economic benefits of these inspections are clearly understood, it will be readily apparent why the industrial use of these inspections is developing rapidly.

Duch, A. A.

1979-01-01T23:59:59.000Z

409

STATEMENT OF CONSIDERATIONS REQUEST BY AIR PRODUCTS AND CHEMICALS...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

its products and processes to various industries, including chemical processing, metallurgy, electronics, and pulp and paper industries. Air Products continues to maintain a...

410

Bibliometrics for Internet Media: Applying the h-Index to YouTube  

E-Print Network (OSTI)

The h-index can be a useful metric for evaluating a person's output of Internet media. Here we advocate and demonstrate adaption of the h-index and the g-index to the top video content creators on YouTube. The h-index for Internet video media is based on videos and their view counts. The index h is defined as the number of videos with >= h*10^5 views. The index g is defined as the number of videos with >= g*10^5 views on average. When compared to a video creator's total view count, the h-index and g-index better capture both productivity and impact in a single metric.

Hovden, Robert

2013-01-01T23:59:59.000Z

411

and Industry Dynamics  

E-Print Network (OSTI)

We assess the long-run dynamic implications of market-based regulation of carbon dioxide emissions in the US Portland cement industry. We consider several alternative policy designs, including mechanisms that use production subsidies to partially offset compliance costs and border tax adjustments to penalize emissions associated with foreign imports. Our results highlight two general countervailing market distortions. First, following Buchanan (1969), reductions in product market surplus and allocative inefficiencies due to market power in the domestic cement market counteract the social benefits of carbon abatement. Second, tradeexposure to unregulated foreign competitors leads to emissions “leakage ” which offsets domestic emissions reductions. Taken together, these forces result in social welfare losses under policy regimes that fully internalize the emissions externality. In contrast, market-based policies that incorporate design features to mitigate the exercise of market power and emissions leakage can deliver welfare gains. 1

Meredith Fowlie; Mar Reguant; Stephen P. Ryan; Meredith Fowlie; Mar Reguant; Stephen P. Ryan

2013-01-01T23:59:59.000Z

412

index  

NLE Websites -- All DOE Office Websites (Extended Search)

Introduction to the C-Mod Experiment Introduction to the C-Mod Experiment Physics Research High-Energy- Density Physics Waves & Beams Technology & Engineering Useful Links 2006 Program Advisory Committee Meeting Agenda, January 25- 27, 2006 Wednesday, January 25, 2006 1:00 pm Executive Session Richard Groebner 1:15 pm Welcome & Charge Miklos Porkolab 1:25 pm Comments from DoE Adam Rosenberg 1:30 pm Program Overview Earl Marmar 2:30 pm C-Mod Research for Integrated Scenarios on ITER Amanda Hubbard 3:30 pm Break 3:40 pm C-Mod Facility and Contributions to ITER Jim Irby 4:40 pm Executive Session 5:10 pm Dinner (off-site) Thursday, January 26, 2006 8:30 am Macro-Stability Bob Granetz 9:15 am ICRF Steve Wukitch 10:00 am Lower Hybrid Ron Parker 10:30 am Break 10:45 am Plasma Boundary Bruce Lipschultz 11:30 am Pedestal Physics

413

Index  

NLE Websites -- All DOE Office Websites (Extended Search)

WIPP Baseline Tool - 2004 Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools The Environmental...

414

Index  

NLE Websites -- All DOE Office Websites (Extended Search)

11 081385 The Effects of Longitudinal and Transverse Driving J. Rosenzweig Bunch Shape on the Plasma Wake Field Accelerator Experiment 12 082185 DOE Presentation 81285...

415

INDEX  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

STANDARD RESEARCH STANDARD RESEARCH SUBCONTRACT (EDUCATIONAL INSTITUTION or NONPROFIT ORGANIZATION) [FOR UNCLASSIFIED WORK] NO. ______________________ (DEPARTMENT OF ENERGY M&O CONTRACTOR) NATI _____________________________________ NAME ADDRESS Subcontractor: Attention: Address City, State, Zip Phone: Fax: E-Mail: Contractor's Procurement Representative [Contract Administrator]: Proc. Rep Title: ___________________ Phone #: Fax #: E-Mail: Introduction This is a cost-reimbursement, no-fee, standard subcontract for unclassified research and development work, not related to nuclear, chemical, biological, or radiological weapons of mass destruction or the

416

INDEX  

E-Print Network (OSTI)

F................................................................................................................................................................ 145 G............................................................................................................................................................... 164 H............................................................................................................................................................... 177 I.................................................................................................................................................................. 194 J................................................................................................................................................................. 216 K............................................................................................................................................................... 219 L................................................................................................................................................................ 221

Doylestown Pa

2007-01-01T23:59:59.000Z

417

Residential Building Industry Consulting Services | Open Energy Information  

Open Energy Info (EERE)

Residential Building Industry Consulting Services Residential Building Industry Consulting Services Jump to: navigation, search Name Residential Building Industry Consulting Services Place New York, NY Information About Partnership with NREL Partnership with NREL Yes Partnership Type Test & Evaluation Partner Partnering Center within NREL Electricity Resources & Building Systems Integration LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Residential Building Industry Consulting Services is a company located in New York, NY. References Retrieved from "http://en.openei.org/w/index.php?title=Residential_Building_Industry_Consulting_Services&oldid=381757" Categories: Clean Energy Organizations Companies Organizations What links here Related changes Special pages

418

Industrial Carbon Capture Project Selections  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(Partner Organizations) Funding Lead Organization Location (City, State) Project Title - Project Description 1) Large Scale Testing of Advanced Gasification Technologies Air Products & Chemicals, Inc. $71,700,000 Allentown, PA Development of ITM Oxygen Technology for Integration with Advanced Industrial Systems Air Products will accelerate commercial manufacture of ion transport membranes modules and initiate the development a 2,000 TPD pre- commercial scale facility ahead of schedule, enabling this technology

419

International Best Practices for Pre-Processing and Co-Processing Municipal Solid Waste and Sewage Sludge in the Cement Industry  

E-Print Network (OSTI)

current anthropogenic CO 2 emissions worldwide. Given increasing cement demand and production, the industry’s absolute energy

Hasanbeigi, Ali

2013-01-01T23:59:59.000Z

420

CONSOLIDATED CERAMIC PRODUCTS, INC.  

Science Conference Proceedings (OSTI)

For 40 years, Consolidated Ceramic Products, Inc. has been of service to the aluminum industries worldwide. An innovative manufacturer and marketer of ...

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

LENNOX HEARTH PRODUCTS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and venting products for the specialty retail, residential new construction and industrial markets. LHP, based in Nashville, TN, is a business unit of Lennox...

422

1988 Bulletin compilation and index  

SciTech Connect

This document is published to provide current information about the national program for managing spent fuel and high-level radioactive waste. This document is a compilation of issues from the 1988 calendar year. A table of contents and one index have been provided to assist in finding information.

NONE

1989-02-01T23:59:59.000Z

423

Transportation environment data bank index  

SciTech Connect

In an effort to determine the environment intensities to which shipping containers will be exposed, a ''Data Bank'' of environmental information has been established by Sandia Laboratories, Division 1285 for the ERDA Division of Environmental Control Technology. This document is an index which can be used to request data of interest. (auth)

Davidson, C.A.; Foley, J.T.

1976-02-01T23:59:59.000Z

424

Optimal deployment of solar index  

SciTech Connect

There is a growing trend, generally caused by state-specific renewable portfolio standards, to increase the importance of renewable electricity generation within generation portfolios. While RPS assist with determining the composition of generation they do not, for the most part, dictate the location of generation. Using data from various public sources, the authors create an optimal index for solar deployment. (author)

Croucher, Matt

2010-11-15T23:59:59.000Z

425

Materials needs and opportunities in the pulp and paper industry  

SciTech Connect

The Department of Energy`s (DOE) Office of Industrial Technologies (OIT) supports research and development (R&D) in industry, the DOE national laboratories, and in universities to develop energy efficient, environmentally-acceptable industrial technologies. The Office of Industrial Technologies is working with seven energy-intensive industries to develop R&D roadmaps that will facilitate cooperative government-industry efforts to achieve energy-efficient, environmentally-acceptable, sustainable industries of the future. The forest products industry is one of the industries with which OIT is working to develop an R&D roadmap. The Advanced Industrial Materials (AIM) Program of the Office of Industrial Technologies sponsors long-term, directed research on materials that will enable industry to develop and utilize more energy-efficient, sustainable processes and technologies. The purpose of the study described in this report was to identify the material R&D needs and opportunities for the pulp and paper mill of the future.

Angelini, P. [comp.

1995-08-01T23:59:59.000Z

426

Hon Hai Precision Industry Co Ltd | Open Energy Information  

Open Energy Info (EERE)

Hon Hai Precision Industry Co Ltd Jump to: navigation, search Name Hon Hai Precision Industry Co Ltd Place Tu-Cheng City, Taiwan Zip 236 Sector Solar Product Taiwan-based...

427

The natural and industrial cycling of indium in the environment  

E-Print Network (OSTI)

Indium is an important metal whose production is increasing dramatically due to new uses in the rapidly growing electronics, photovoltaic, and LED industries. Little is known, however, about the natural or industrial cycling ...

White, Sarah Jane O'Connell

2012-01-01T23:59:59.000Z

428

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

| Industrial Program Coordinator | Publications Courtesy of The New York Times, Noah Berger The overall goal of the plan to enhance the NSLS facility's Industrial Users'...

429

Uranium industry annual 1997  

SciTech Connect

This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

NONE

1998-04-01T23:59:59.000Z

430

Construction Industry Institute  

Science Conference Proceedings (OSTI)

... in one of our country's most vital industries. ... An industry-led program to disseminate practical ... fire-proofing materials, connections, and steel trusses; ...

2010-10-05T23:59:59.000Z

431

Microsoft Word - CBS News Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Science Newsletter Index Building Science Newsletter Index All CBS Newsletters that are in print are also available on the web at: http://eetd.lbl.gov/cbs/newsletter/CBSNews.html Articles are listed here by title in the order they appear. Summer 1998 (This is the final issue. See new EETD Newsletter, beginning Spring 99.) Reducing the Federal Energy Bill - Berkeley Lab's Work with the Federal Energy Management Program. (Allan Chen, p.1.) News from the DC Office: Regional Builder Option Packages: A Simplified Guide for Constructing Energy Star Homes (Donald Mauritz, p.3.) A Survey: Indoor Air Quality in Schools. (Joan Daisey and William Angell, p. 4.) International Energy-Efficiency Standards. (Mirka Della Cava, p.5.) Energy Plus: The Merger of BLAST and DOE-2. (Dru Crawley, p.6.)

432

Web-Based Industrial Energy Management Tool  

Science Conference Proceedings (OSTI)

This report describes continuing research on the Industrial Energy Management Tool (IEMT), a web-based software resource intended for the evaluation of industrial energy efficiency measures. The IEMT software development is ongoing, and this report covers the status of an alpha tool that has already been created and plans for moving forward with development of a beta product.

2008-03-31T23:59:59.000Z

433

Principles of biotechnological treatment of industrial wastes  

Science Conference Proceedings (OSTI)

This review includes current information on biodegradation processes of pollutants, digestor biocenosis and bioadditives, sludge production, measurement of pollution, and advances regarding biotechnological treatment of a series of specific industrial effluents. It was foreseen in 1980 that biotechnology would foster the creation of new industries with low energy requirements. This is because the growth of microorganisms provides a renewable source of energy.

Roig, M.G.; Martin Rodriguez, M.J.M.; Cachaza, J.M. (Univ. de Salamanca, Salamanca (Spain). Dept. de Quimica Fisica); Mendoza Sanchez, L. (C/Sol Oriente, Salamanca (Spain). Estudios y Proyectos); Kennedy, J.F. (Univ. of Birmingham, Birmingham (United Kingdom). Research Lab. for the Chemistry of Bioactive Carbohydrates and Proteins)

1993-07-01T23:59:59.000Z

434

Date: 13/9/2010 Industry News  

E-Print Network (OSTI)

for metalworking and woodworking machinery, for the car and other industries 08.02 - 11.02 2010 ZOW BAD SALZUFLEN and Supplies for Production of Windows and Doors. Fittings and Accessories. Roofing and Hydro Insulating

435

Industrial Energy Efficiency and Climate Change Mitigation  

E-Print Network (OSTI)

CO 2 Emission reduction in 2030. Results are presented forand paper industries. Area b 2030 production (Mt) a A1 B2electrode technology by 2030. g Humphreys and Mahasenan,

Worrell, Ernst

2009-01-01T23:59:59.000Z

436

Agro Industrial Taruma | Open Energy Information  

Open Energy Info (EERE)

navigation, search Name Agro Industrial Taruma Place Sao Pedro do Turvo, Sao Paulo, Brazil Zip 18940-000 Product Brazil based ethanol producer located in Sao Pedro do Turvo, Sao...

437

Patterns of innovation in service industries  

Science Conference Proceedings (OSTI)

The diversity of service activities means that service innovations and innovation processes take various forms. In this paper, we use input/output and other data to depict how service industries vary in such areas as products, markets, work organization, ...

I. Miles

2008-01-01T23:59:59.000Z

438

Essays concerning the cellulosic biofuel industry.  

E-Print Network (OSTI)

??Despite market-based incentives and mandated production, the U.S. cellulosic biofuel industry has been slow to develop. This dissertation explores the economic factors that have limited… (more)

Rosburg, Alicia Sue

2012-01-01T23:59:59.000Z

439

Industrial Applications of Renewable Resources  

Science Conference Proceedings (OSTI)

Archive of Industrial Applications of Renewable Resources Industrial Applications of Renewable Resources Cincinnati, Ohio, USA Industrial Applications of Renewable Resources ...

440

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Module calculates

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Demand Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Demand Module calculates energy consumption for the four Census Regions (see Figure 5) and disaggregates the energy consumption

442

transportation industry | OpenEI  

Open Energy Info (EERE)

25 25 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142279625 Varnish cache server transportation industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by the transportation industry. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption

443

Strategy of Speeding up the Modernization Process of China's Coal Industry  

Science Conference Proceedings (OSTI)

In this thesis, the China’s Industry will be fractionized through the industry categories and that will be according to the level of modernization evaluating index system which is common used in Developed Countries, and then, we will admeasure ... Keywords: level of modernization, the coal industry, admeasure

Jiang Hong; Zhao Baofu

2010-05-01T23:59:59.000Z

444

Uranium industry annual 1993  

SciTech Connect

Uranium production in the United States has declined dramatically from a peak of 43.7 million pounds U{sub 3}O{sub 8} (16.8 thousand metric tons uranium (U)) in 1980 to 3.1 million pounds U{sub 3}O{sub 8} (1.2 thousand metric tons U) in 1993. This decline is attributed to the world uranium market experiencing oversupply and intense competition. Large inventories of uranium accumulated when optimistic forecasts for growth in nuclear power generation were not realized. The other factor which is affecting U.S. uranium production is that some other countries, notably Australia and Canada, possess higher quality uranium reserves that can be mined at lower costs than those of the United States. Realizing its competitive advantage, Canada was the world`s largest producer in 1993 with an output of 23.9 million pounds U{sub 3}O{sub 8} (9.2 thousand metric tons U). The U.S. uranium industry, responding to over a decade of declining market prices, has downsized and adopted less costly and more efficient production methods. The main result has been a suspension of production from conventional mines and mills. Since mid-1992, only nonconventional production facilities, chiefly in situ leach (ISL) mining and byproduct recovery, have operated in the United States. In contrast, nonconventional sources provided only 13 percent of the uranium produced in 1980. ISL mining has developed into the most cost efficient and environmentally acceptable method for producing uranium in the United States. The process, also known as solution mining, differs from conventional mining in that solutions are used to recover uranium from the ground without excavating the ore and generating associated solid waste. This article describes the current ISL Yang technology and its regulatory approval process, and provides an analysis of the factors favoring ISL mining over conventional methods in a declining uranium market.

Not Available

1994-09-01T23:59:59.000Z

445

Innovative New Industrial Technologies: An Industry/DOE Joint Endeavor  

E-Print Network (OSTI)

The Department of Energy’s Office of Industrial Programs supports research and development leading to improved energy efficiency and greater overall productivity in the industrial sector. Its basic strategy is a program of cost-shared R&D, incorporating projects with such risk that the private sector will not pursue them independently. This paper describes the Office’s major activities, operating premises and research areas. Policy considerations affecting the program’s content are identified and criteria applied in project selection are discussed. Achievement of constructive industry involvement in program development and review is viewed as vital to success. This goal, and the means by which it is being pursued, are emphasized.

Gross, T. J.

1986-06-01T23:59:59.000Z

446

Biodiesel Production and Blending Tax Credit (Kentucky) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biodiesel Production and Blending Tax Credit (Kentucky) Biodiesel Production and Blending Tax Credit (Kentucky) Eligibility Commercial Industrial Program Information Kentucky...

447

How Can China Lighten Up? Urbanization, Industrialization and Energy Demand Scenarios  

E-Print Network (OSTI)

of China‘s iron and steel industry. ? Int. J. Productionof China‘s iron and steel industry. ? Int. J. ProductionAfter the iron and steel sub-sector, the industries with the

Aden, Nathaniel T.

2010-01-01T23:59:59.000Z

448

Zoe Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

D.C. 20585 D.C. 20585 ) ) ) ) ) Case Number: 2011-SW-2912 Issued: September 28, 2011 NOTICE OF NONCOMPLIANCE DETERMINATION Manufacturers and private labelers are prohibited from distributing covered products that do not comply with applicable Federal water conservation standards. 10 C.F.R. § 429.102; 42 U.S.C. § 6302. On July 20, 2011, DOE tested four units of the Giessdorf eight-jet basic model showerhead, SKU 150043 ("Giessdorf 150043"), manufactured by GiessdorfPlumbing, Inc. ("Giessdorf"), and imported by Zoe Industries, Inc. ("Zoe"), in accordance with DOE test procedures (10 C.F.R. Part 430, Subpart B, Appendix S). DOE's testing demonstrated that the Giessdorf 150043 model is not in compliance with Federal law. First, Federal water conservation standards require that the water flow for a showerhead

449

Applications of fusion thermal energy to industrial processes  

DOE Green Energy (OSTI)

The feasibility of applying fusion thermal energy as process heat in the iron-steel industry, petrochemical industry, cement industry, and in the production of acetylene fom coal via calcium carbide are discussed. These four industries were selected for analysis because they require massive amounts of energy. This preliminary study concludes that the production of synthetic fuels using fusion heat appears to be the most promising method of storing and transporting this heat. Of the four industries studied, the iron-steel and the petrochemical industries appear to be the most promising because they consume substantial amounts of hydrogen and oxygen as feedstocks. These can be produced from water using the high-temperature fusion heat. The production of hydrogen and oxygen using fusion heat will also reduce the capital investment required for these industries. These two industries also consume tremendous amounts of heat at temperatures which can be delivered from a fusion blanket via chemical heat pipes.

Bowman, R.M.; Jody, B.J.; Lu, K.C.

1980-01-01T23:59:59.000Z

450

Indexes to Nuclear Regulatory Commission Issuances, July--December 1993. Volume 38, Index 2  

Science Conference Proceedings (OSTI)

Digests and indexes for issuances of the Commission (CLI), the Atomic Safety and Licensing Board Panel (LBP), the Administrative Law Judges (ALJ), the Directors` Decisions (DD), and the Denials of Petitions for Rulemaking (DPRM) are presented in this document. These digests and indexes are intended to serve as a guide to the issuances. These information elements are displayed in one or more of five separate formats arranged as follows: Case Name Index; Digests and Headers; Legal Citations Index; Subject Index, and Facility Index.

Not Available

1994-04-01T23:59:59.000Z

451

Despatch Industries | Open Energy Information  

Open Energy Info (EERE)

Despatch Industries Despatch Industries Jump to: navigation, search Name Despatch Industries Place Minneapolis, Minnesota Zip 55044 Sector Solar Product Manufacturer of infrared drying and firing furnaces used in solar cell manufacture, and other thermal processing equipment. Coordinates 44.979035°, -93.264929° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.979035,"lon":-93.264929,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

452

Jax Industries | Open Energy Information  

Open Energy Info (EERE)

Jax Industries Jax Industries Jump to: navigation, search Name Jax Industries Place Hillsboro, Oregon Product Developer of recharge systems for CZ process silicon ingot growers, some of which produce PV silicon feedstock. Coordinates 43.651735°, -90.341144° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.651735,"lon":-90.341144,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

453

Comparison of Spectral Index Determinations  

E-Print Network (OSTI)

The index $n$ of a power law power spectrum of primordial density fluctuations, $P(k) \\propto k^n$, has been estimated using many different techniques. The most precise compare the COBE DMR large angular scale $\\Delta T$ to the amplitude of the large scale structure, but these are also the most model-dependent. The COBE DMR $\\Delta T$ has also been compared to the degree-scale $\\Delta T$ from several experiments. And finally, a relatively model-independent value of $n$ can derived from the COBE data alone, but the small range of angular scales covered by COBE limits the precision of these methods.

Edward L. Wright

1994-08-01T23:59:59.000Z

454

ConSol (Building Industry Research Alliance) | Open Energy Information  

Open Energy Info (EERE)

ConSol (Building Industry Research Alliance) ConSol (Building Industry Research Alliance) Jump to: navigation, search Name ConSol (Building Industry Research Alliance) Place Stockton, CA Website http://www.consol.com References ConSol (Building Industry Research Alliance)[1] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Incubator Partnering Center within NREL Electricity Resources & Building Systems Integration Partnership Year 2004 Link to project description http://www.nrel.gov/news/press/2004/382.html LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! ConSol (Building Industry Research Alliance) is a company located in Stockton, CA. References ↑ "ConSol (Building Industry Research Alliance)" Retrieved from "http://en.openei.org/w/index.php?title=ConSol_(Building_Industry_Research_Alliance)&oldid=379316

455

Industrial Energy Efficiency Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial Energy Efficiency Basics Industrial Energy Efficiency Basics Industrial Energy Efficiency Basics The industrial sector is vital to the U.S. economy, but at the same time consumes the most energy in the country to manufacture products we use every day. Among the most energy-intensive industries are aluminum, chemicals, forest product, glass, metal casting, mining, petroleum refining, and steel. The energy supply chain begins with electricity, steam, natural gas, coal, and other fuels supplied to a manufacturing plant from off-site power plants, gas companies, and fuel distributors. Energy then flows to either a central energy generation utility system or is distributed immediately for direct use. Energy is then processed using a variety of highly energy-intensive systems, including steam, process heating, and

456

ET Industries: Noncompliance Determination (2012-SE-2902) | Department of  

NLE Websites -- All DOE Office Websites (Extended Search)

Noncompliance Determination (2012-SE-2902) Noncompliance Determination (2012-SE-2902) ET Industries: Noncompliance Determination (2012-SE-2902) May 24, 2013 DOE issued a Notice of Noncompliance Determination to ET Industries, Inc. finding that showerhead basic model TH-1 does not comport with the water conservation standards. DOE determined the product was noncompliant based on DOE testing. ET Industries must immediately notify each person (or company) to whom ET Industries distributed the noncompliant products that the product does not meet Federal standards. In addition, ET Industries must provide to DOE documents and records showing the number of units ET Industries distributed and to whom. The manufacturer and/or private labeler of the product may be subject to civil penalties. ET Industries: Noncompliance Determination (2012-SE-2902)

457

Global Vegetation Data: Leaf Area Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Leaf Area Index Data Available The ORNL DAAC announces the availability of a global data set containing approximately 1000 estimates of leaf area index (LAI) for a variety of...

458

High index contrast platform for silicon photonics  

E-Print Network (OSTI)

This thesis focuses on silicon-based high index contrast (HIC) photonics. In addition to mature fiber optics or low index contrast (LIC) platform, which is often referred to as Planar Lightwave Cirrcuit (PLC) or Silica ...

Akiyama, Shoji, 1972-

2004-01-01T23:59:59.000Z

459

UV Index Widget | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Description The UV Index Widget displays the ultraviolet (UV) Index providing a daily forecast of the expected risk of overexposure to the sun for a user-specified area of interest...

460

Indexing Flower Patent Images Using Domain Knowledge  

Science Conference Proceedings (OSTI)

The authors describe a new approach to indexing a specialized database using the color and spatial domain knowledge available for the database. They illustrate their approach by using it to solve the problem of indexing flower images when searching a ...

Madirakshi Das; R. Manmatha; Edward M. Riseman

1999-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

DIRECTORY OF FOREST PRODUCTS INDUSTRIES UPDATE FORM  

E-Print Network (OSTI)

Particleboard Other: Composite Firelogs Cones Containers Cooking Wood Cooling Towers Crates Crossties Custom Particleboard Other: Composite Firelogs Cones Containers Cooking Wood Cooling Towers Crates Crossties Custom

462

Productivity benefits of industrial energy efficiency measures  

E-Print Network (OSTI)

US Department of Energy, Washington, DC (1997). 19. Nyboerfor an Energy-Efficient Economy, Washington DC (1999), pp.for an Energy-Efficient Economy, Washington DC (1999), pp.

Worrell, Ernst

2011-01-01T23:59:59.000Z

463

Productivity benefits of industrial energy efficiency measures  

E-Print Network (OSTI)

Kram. Prospects for energy technologies in The Netherlandsof Demonstrated Energy Technologies (CADDET). Sittard, Thein the evaluation of energy technology investments. A total

Worrell, Ernst

2011-01-01T23:59:59.000Z

464

Productivity benefits of industrial energy efficiency measures  

E-Print Network (OSTI)

at the coke battery Saves equipment/handling costs; reducesand material cost savings at the coke battery Decreases cokeand material cost savings at the coke battery Decreases coke

Worrell, Ernst

2011-01-01T23:59:59.000Z

465

PNNL: Available Technologies: Consumer Products Industry  

Non-Contact Sensor for Measuring the Density and Speed of Sound of a Liquid Contained in a Pipeline or Vessel; Real-Time Fluid Viscometer in Contact ...

466

Productivity benefits of industrial energy efficiency measures  

E-Print Network (OSTI)

the blast furnace means less coke is needed, so maintenancecontrol Foamy slag practices Coke making Oxy-fuel burners/Variable speed drive on coke oven gas compressors Coke dry

Worrell, Ernst

2011-01-01T23:59:59.000Z

467

UN Alcohol Energy Data: Consumption by other industries and constructi...  

Open Energy Info (EERE)

other industries and construction The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and...

468

UN Alcohol Energy Data: Consumption by transportation industry...  

Open Energy Info (EERE)

by transportation industry The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and...

469

Allsoft Engenharia e Informatica Industrial | Open Energy Information  

Open Energy Info (EERE)

Product A Brazilian engineering and fabrication company specialising in boiler and steam generation equipment. References Allsoft Engenharia e Informatica Industrial1...

470

Recovery Act: Re-utilization of Industrial Carbon Dioxide for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Re-utilization of Industrial Carbon Dioxide for Algae Production Using a Phase Change Material Background Worldwide carbon dioxide (CO 2 ) emissions from human activity have...

471

HIGH STRENGTH PHOSPHATE CEMENT USING INDUSTRIAL BYPRODUCT ASHES ...  

industries that use fossil fuels. Approximately one third of this ash is recycled in the cement based products as an additive. Typically, ...

472

Short-Term Energy Outlook Supplement: Energy-weighted industrial...  

U.S. Energy Information Administration (EIA) Indexed Site

Short-Term Energy Outlook Supplement: Energy-weighted industrial production indices December 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy...

473

PPL Electric Utilities - Commercial and Industrial Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utilities PPL Electric Utilities offers rebates and incentives for commercial and industrial products installed in their service area. The program offers heating and...

474

Development of a Performance-based Industrial Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

the work of EPA and the pharmaceutical manufacturing industry to develop an Energy Performance Indicator (EPI) for facilities that develop and manufacture pharmaceutical products...

475

Vision Industries dba Vision Motor Corp | Open Energy Information  

Open Energy Info (EERE)

Vision Motor Corp) Place Santa Monica, California Zip 90405 Product Santa Monica-based electric vehicle manufacturer. References Vision Industries (dba Vision Motor Corp)1...

476

Deregulation and Resource Reconfiguration In The Electric Utility Industry  

E-Print Network (OSTI)

and Scale Economies in Electric Power Production: Some Newand Delivery of Electric Power. Land Economics 62(4): 378-1998 Challenges of Electric Power Industry Restructuring for

Delmas, Magali; Russo, Michael V.; Montes-Sancho, Maria J.

2005-01-01T23:59:59.000Z

477

Industrial sector drives increase in North Dakota electricity ...  

U.S. Energy Information Administration (EIA)

Increased oil and natural gas production in North Dakota has driven the state's growth in industrial demand for electricity. Rising economic activity and population ...

478

PPL Electric Utilities- Commercial and Industrial Energy Efficiency Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

PPL Electric Utilities offers rebates and incentives for commercial and industrial products installed in their service area. The program offers heating and cooling equipment, motors, insulation,...

479

Companhia Industrial do Nordeste Brasileiro | Open Energy Information  

Open Energy Info (EERE)

navigation, search Name Companhia Industrial do Nordeste Brasileiro Place Pernambuco, Brazil Sector Biomass Product Brazil based biomass producer located in the state of...

480

Development of a Performance-Based Industrial Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

that produce a variety of products - including corn starch, corn oil, animal feed, corn sweeteners, and ethanol -for the paper, food, beverage, and other industries in the...

Note: This page contains sample records for the topic "industrial production indexes" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Companhia Agro Industrial de Goiana | Open Energy Information  

Open Energy Info (EERE)

Agro Industrial de Goiana Place Recife, Pernambuco, Brazil Sector Biomass Product Ethanol and biomass electricity generator in Pernambuco, Brazil. References Companhia Agro...

482

NETL: News Release - DOE, Industry Consortium Project Deploys...  

NLE Websites -- All DOE Office Websites (Extended Search)

4 , 2006 DOE, Industry Consortium Project Deploys New Stripper Well Tool Novel Technology Boosts Oil and Gas Production and Efficiency at 200 Sites Nationwide WASHINGTON, DC - A...

483

Status of domestic uranium industry  

Science Conference Proceedings (OSTI)

The domestic uranium industry continues to operate at a reduced level, due to low prices and increased foreign competition. For four years (1984-1987) the Secretary of Energy declared the industry to be nonviable. A similar declaration is expected for 1988. Exploration and development drilling, at the rate of 2 million ft/year, continue in areas of producing mines and recent discoveries, especially in northwestern Arizona, northwestern Nebraska, south Texas, Wyoming, and the Paradox basin of Colorado and Utah. Production of uranium concentrate continues at a rate of 13 to 15 million lb of uranium oxide (U{sub 3}O{sub 8}) per year. Conventional mining in New Mexico, Arizona, Utah, Colorado, Wyoming, and Texas accounts for approximately 55% of the production. The remaining 45% comes from solution (in situ) mining, from mine water recovery, and as by-products from copper production and the manufacture of phosphoric acid. Solution mining is an important technique in Wyoming, Nebraska, and Texas. By-product production comes from phosphate plants in Florida and Louisiana and a copper mine in Utah. Unmined deposits in areas such as the Grants, New Mexico, district are being investigated for their application to solution mining technology. The discovered uranium resources in the US are quite large, and the potential to discover additional resources is excellent. However, higher prices and a strong market will be necessary for their exploitation.

Chenoweth, W.L.

1989-09-01T23:59:59.000Z

484

AVLIS industrial access program  

Science Conference Proceedings (OSTI)

This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the project in a competitive procurement situation. As a result, costs and procurement risks are both reduced because the products provided come from within the AVLIS suppliers' experience base. At the same time, suppliers can benefit by the potential to participate in AVLIS technology spin-off markets. 35 figures.

Not Available

1984-11-15T23:59:59.000Z

485

Energy efficient industrialized housing research program  

Science Conference Proceedings (OSTI)

This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

1989-12-01T23:59:59.000Z

486

Global Industry Analysts | Open Energy Information  

Open Energy Info (EERE)

Global Industry Analysts Global Industry Analysts Jump to: navigation, search Name Global Industry Analysts Address 6150 Hellyer Avenue Place San Jose, California Zip 95138 Product Market research services Year founded 1987 Number of employees 501-1000 Phone number (408) 528-9966 Website http://www.strategyr.com/ Region Bay Area References Global Industry Analysts[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Global Industry Analysts Global Industry Analysts, Inc., (GIA) offers one of the world's largest portfolios of research reports in terms of topics covered, geographic regions analyzed, companies profiled, and pages published. The company's current portfolio consists of more than 900 Global Strategic Business Reports (large multi-client research programs); 45,000+ Market Trend

487

Parallelizing an Index Generator for Desktop Search  

E-Print Network (OSTI)

combination of search terms. The search uses an inverted index that lists the files in which a given term in a given document. Should a term be entered into the index every time it is found, or should the term a term has been looked up in the index, a search must check whether the pair (term, filename) had been

Paris-Sud XI, Université de

488

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS 27 data.

489

Industrial Decision Making  

E-Print Network (OSTI)

Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy although, freight costs, favorable exchange rates and high capacity utilization will encourage future industrial investment. Industry will eventually enter a new period of major investment. Future industrial investment will be an opportunity to influence the energy efficiency of these facilities for generations to come. Program managers must begin engaging industrial customers now, in order to exploit this unprecedented opportunity to change future energy use patterns. This paper reviews recent market trends and industrial investment decision-making. The paper will also address several important questions: • Why has industrial investment declined? • What is the outlook for industrial investment? • How can programs engage industry for future opportunities?

Elliott, R. N.; McKinney, V.; Shipley, A.

2008-01-01T23:59:59.000Z

490

Information Technology Spillover and Productivity: The Role of Information Technology Intensity and Competition  

Science Conference Proceedings (OSTI)

We study interindustry information technology (IT) spillover wherein IT investments made by supplier industries increase the productivity of downstream industries. Using data from U.S. manufacturing industries, we find that industries receive significant ... Keywords: Competition, Industry Analysis, Industry Characteristics, It Effects, It Intensity, It Spillover, Productivity, Total Factor Productivity

Kunsoo Han; Young Chang; Jungpil Hahn

2011-07-01T23:59:59.000Z

491

Status of the LNG industry  

Science Conference Proceedings (OSTI)

A status report on the liquefied natural gas (LNG) industry after 22 years of international trade compares developments during 1984-1985 for the major exporting and importing countries. Japan, the leading consumer, imports over 72% of the world production, while Europe imports 27% and the US 1%. There are 10 baseload liquefaction plants with a collective capacity of about 230 million m/sup 3//streamday. Japan has 85% of the world's LNG storage facilities because its geology is not suitable for underground storage. Utilities are looking to LNG for peakshaving, but it will be necessary to time projects so that production and demand will develop a reliable trade climate. 3 tables.

Anderson, P.J.

1986-06-30T23:59:59.000Z

492

Coal Industry Annual, 1996  

Reports and Publications (EIA)

Provides comprehensive information about U.S. coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves.

Fred Freme

1998-04-01T23:59:59.000Z

493

Coal Industry Annual, 1997  

Reports and Publications (EIA)

Provides comprehensive information about U.S. coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves.

Fred Freme

1998-11-23T23:59:59.000Z

494

Coal Industry Annual, 1995  

Reports and Publications (EIA)

Provides comprehensive information about U.S. coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves.

Fred Freme

1996-11-17T23:59:59.000Z

495

Coal Industry Annual, 1998  

Reports and Publications (EIA)

Provides comprehensive information about U.S. coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves.

Fred Freme

2000-07-07T23:59:59.000Z

496

Coal Industry Annual, 1994  

Reports and Publications (EIA)

Provides comprehensive information about U.S. coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves.

Fred Freme

1996-04-18T23:59:59.000Z

497

Coal Industry Annual, 1999  

Reports and Publications (EIA)

Provides comprehensive information about U.S. coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves.

Information Center

498

Coal Industry Annual, 2000  

Reports and Publications (EIA)

Provides comprehensive information about U.S. coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves.

Information Center

499

Department of Energy Standards Index  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TSL-1-2002 TSL-1-2002 December 2002 Superseding DOE-TSL-1-99 May 1999 DOE TECHNICAL STANDARDS LIST DEPARTMENT OF ENERGY STANDARDS INDEX U.S. Department of Energy AREA SDMP Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-TSL-1-2002 iii FOREWORD 1. This Department of Energy (DOE) Technical Standards list (TSL) has been prepared by the Office of Nuclear and Facility Safety Policy (EH-53) on the basis of currently available technical information.

500