Sample records for industrial medium general

  1. General overview of the Nigerian construction industry

    E-Print Network [OSTI]

    Dantata, Sanusi (Sanusi A.)

    2008-01-01T23:59:59.000Z

    The purpose of this study is to investigate and provide a general overview of the Nigerian construction industry, its role in the national economy, the main participants in the industry, the problems that they face, and ...

  2. Combustion System Development for Medium-Sized Industrial Gas Turbines: Meeting Tight Emission Regulations while Using

    E-Print Network [OSTI]

    Ponce, V. Miguel

    Combustion System Development for Medium-Sized Industrial Gas Turbines: Meeting Tight Emission and the oil & gas industries. The combustion system used in Solar's products are discussed along- bility for the introduction of new combustion systems for gas turbine products to enhance fuel

  3. Coupling free flow / porous-medium flow General idea

    E-Print Network [OSTI]

    Cirpka, Olaf Arie

    equation t (v) + div (vv ) - div(v) + p - g - qv = 0 Darcy flow equation t (S) - div K (p - g) - qpmT transport equation t (X) + div (vX - DsteamX) = qsteam 16/14 #12;Backup additional Darcy flow equations-Stokes 1 phase, 2 components, temperature sharp interface porous-medium / Darcy flow 2 phases, 2 component

  4. Nuclear Medium Modifications of Hadrons from Generalized Parton Distributions

    E-Print Network [OSTI]

    S. Liuti; S. K. Taneja

    2005-05-06T23:59:59.000Z

    We study the structure of generalized parton distributions in spin 0 nuclei within a microscopic approach for nuclear dynamics. GPDs can be used on one side as tools to unravel the deep inelastic transverse structure of nuclei in terms of both transverse spatial and transverse momentum degrees of freedom. On the other, one can obtain information on GPDs themselves by observing how they become modified in the nuclear environment. We derive the structure of the nuclear deeply virtual Compton scattering tensor and generalized parton distributions at leading order in $Q$ in a field-theoretical framework. The nuclear generalized parton distributions are calculated using a two step process -- the convolution approach -- where the scattering process happens from a quark inside a nucleon, itself inside a nucleus, disregarding final state interactions with both the nuclear and nucleon debris. We point out that details of the nuclear long range interactions such as two-body currents, can be disregarded compared to the deep inelastic induced modifications of the bound GPDs. We show how the pattern of nuclear modifications predicted, and in particular the deviations of off-shell effects from the longitudinal convolution provide clear signals to be sought in experimental measurements. Finally, we find interesting relationships by studying Mellin moments in nuclei: in particular we predict the $A$-dependence for the $D$-term of GPDs within a microscopic approach, and the behavior with $t$ of the total momentum carried by quarks in a nucleus. The latter provides an important element for the evaluation of nuclear hadronization phenomena which are vital for interpreting current and future data at RHIC, HERMES and Jefferson Lab.

  5. A Collaborative Model for a Sustainable Management System for Energy at Small to Medium Industrial Enterprises

    E-Print Network [OSTI]

    Imel, M.; Gromacki, M.; Magoon, D.

    A Collaborative Model for a Sustainable Management System for Energy at Small to Medium Industrial Enterprises Mark Imel Technical Manager ? Energy Services Burns & McDonnell Kansas City, MO Michael Gromacki Vice President ? Engineering... adequate resources to implement a sustainable energy management program. A strategy to overcome this constraint is to collaborate and develop partnerships between the company and other external resources. This paper describes a unique business...

  6. GUIDO BARTELS General Manager Global Energy & Utilities Industry, IBM

    E-Print Network [OSTI]

    Energy Inc., a U.S. based publicly-traded, green energy technology company. Bartels is a frequent speakerGUIDO BARTELS General Manager Global Energy & Utilities Industry, IBM Chairman, Global Smart Grid Federation Board Member and Former Chairman, GridWise Alliance Guido Bartels heads up IBM's energy

  7. Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity Proton Linac

    E-Print Network [OSTI]

    Kuzminski, J; Gentzlinger, R C; Maccioni, P

    2000-01-01T23:59:59.000Z

    During 1999, four 700-MHz, medium-beta (b = 0.64), superconducting radio frequency (SCRF) cavities for a high-intensity proton linac project at Los Alamos National Laboratory (LANL) were manufactured by industry. The SCRF cavities were designed by a LANL team in Los Alamos, New Mexico, USA, and manufactured at a CERCA plant in Romans, France. The cavities were made of 4-mm-thick, solid niobium sheets with a residual resistivity ratio (RRR) greater than 250. These niobium sheets were supplied by Wah Chang (USA), Heraeus AG (Germany), and Tokyo Denkai (Japan). The SCRF cavities were shipped to LANL for performance testing. This paper describes the experience gained during the manufacturing process at CERCA.

  8. Energy Conservation Through Heating/Cooling Retrofits in Small and Medium-Sized Industrial Plants

    E-Print Network [OSTI]

    Saman, N.; Eggebrecht, J.

    .1O/MCF). The estimated implementation cost is $6524 resulting in a simple payback period of 2.2 years. 2- HVAC Controls and Operations Manual thermostats were suggested to be replaced by programmable thermostats at different industrial plants... office areas. We will discuss three examples that involve plants manufacturing drill bits for the petroleum industry, soft drinks and soft drink syrups, and newspaper industries [7,8,9]. For the drill bits industry, none of the several thermostats...

  9. On-Line Educational Means on Radiological Protection and Accelerator General Safety Policy in Radiotherapy and Industrial Sterilization Facilities

    E-Print Network [OSTI]

    Spyropoulos, B

    1999-01-01T23:59:59.000Z

    On-Line Educational Means on Radiological Protection and Accelerator General Safety Policy in Radiotherapy and Industrial Sterilization Facilities

  10. Industry

    SciTech Connect (OSTI)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01T23:59:59.000Z

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  11. Five Common Energy Conversion Projects in Small and Medium-Sized Industrial Plants

    E-Print Network [OSTI]

    Britton, A. J.; Heffington, W. M.; Nutter, D. W.

    characteristic of many air leaks have smaller coefficients. In general, accuracy may suffer considerably in application of the above method. However this method does have the advantage of identifying the location (or at least the general vicinity) of each leak... operating 50,000 lbm/hr steam boiler to 300 ?F would raise the temperature of 16,000 lbm/hr of feedwater by 96 ?F. This decreased the energy required to boil the feed water by 10,600 MCF/yr worth $23,100/yr, and had a payback of 1.5 years. Combustion air...

  12. Standards Panel: 1. Stephen Diamond, General Manager, Industry Standards Office and Global Standards Officer, EMC

    E-Print Network [OSTI]

    Standards Officer, EMC Corporation, Office of the CTO Steve Diamond has 30 years of management, marketing was President of the IEEE Computer Society. Steve is General Manager of the Industry Standards Office at EMC Corporation, and Global Standards Officer in the Office of the CTO. Before EMC, he was responsible for cloud

  13. Development of a Low NOx Medium sized Industrial Gas Turbine Operating on Hydrogen-Rich Renewable and Opportunity Fuels

    SciTech Connect (OSTI)

    Srinivasan, Ram

    2013-07-31T23:59:59.000Z

    This report presents the accomplishments at the completion of the DOE sponsored project (Contract # DE-FC26-09NT05873) undertaken by Solar Turbines Incorporated. The objective of this 54-month project was to develop a low NOx combustion system for a medium sized industrial gas turbine engine operating on Hydrogen-rich renewable and opportunity Fuels. The work in this project was focused on development of a combustion system sized for 15MW Titan 130 gas turbine engine based on design analysis and rig test results. Although detailed engine evaluation of the complete system is required prior to commercial application, those tasks were beyond the scope of this DOE sponsored project. The project tasks were organized in three stages, Stages 2 through 4. In Stage 2 of this project, Solar Turbines Incorporated characterized the low emission capability of current Titan 130 SoLoNOx fuel injector while operating on a matrix of fuel blends with varying Hydrogen concentration. The mapping in this phase was performed on a fuel injector designed for natural gas operation. Favorable test results were obtained in this phase on emissions and operability. However, the resulting fuel supply pressure needed to operate the engine with the lower Wobbe Index opportunity fuels would require additional gas compression, resulting in parasitic load and reduced thermal efficiency. In Stage 3, Solar characterized the pressure loss in the fuel injector and developed modifications to the fuel injection system through detailed network analysis. In this modification, only the fuel delivery flowpath was modified and the air-side of the injector and the premixing passages were not altered. The modified injector was fabricated and tested and verified to produce similar operability and emissions as the Stage 2 results. In parallel, Solar also fabricated a dual fuel capable injector with the same air-side flowpath to improve commercialization potential. This injector was also test verified to produce 15-ppm NOx capability on high Hydrogen fuels. In Stage 4, Solar fabricated a complete set of injectors and a combustor liner to test the system capability in a full-scale atmospheric rig. Extensive high-pressure single injector rig test results show that 15-ppm NOx guarantee is achievable from 50% to 100% Load with fuel blends containing up to 65% Hydrogen. Because of safety limitations in Solar Test Facility, the atmospheric rig tests were limited to methane-based fuel blends. Further work to validate the durability and installed engine capability would require long-term engine field test.

  14. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    SHIP - Solar heat for industrial processes. Internationalsolar power could be used to provide process heat for

  15. Stimulating Manufacturing Excellence in Small and Medium Enterprises, SMESME 2005 Stimulating Industrial Excellence in European Textile SME's

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    Industrial Excellence in European Textile SME's Nicholas Bilalis 1 , Emmanuel Alvizos 1 , Emmanuel There are more than 100.000 European SME's, in the whole chain of operation from spinning to clothing. Keywords: Industrial Excellence, Textile Sector, IEA, SME 1. Introduction The findings presented

  16. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    oil, starch and corn refining, since these can be a source of fuel products. The sugar cane industry

  17. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

  18. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    iron and steel production. IEA Greenhouse Gas R&D Programme,tempera- ture range. IEA/Caddet, Sittard, The Netherlands.industry. Cheltenham, UK, IEA Greenhouse Gas R&D Programme,

  19. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    process residual like bagasse are now available (Cornland etsugar in- dustry uses bagasse and the edible oils industrySection 7.4.7. ). The use of bagasse for energy is likely to

  20. A Generalized Method for Estimation of Industrial Energy Savings from Capital and Behavioral Programs 

    E-Print Network [OSTI]

    Luneski, R. D.

    2011-01-01T23:59:59.000Z

    In 2005, NEEA engaged the food processing industry in the Northwest with a behavior based program called Continuous Energy Improvement (CEI). Industrial energy efficiency programs have historically been limited to large ...

  1. From Aural Places to Visual Spaces: The Latin/o and General Music Industries 

    E-Print Network [OSTI]

    Westgate, Christopher Joseph

    2012-10-19T23:59:59.000Z

    , Rosalía Chalía, Don Azpiazú, Xavier Cugat, Carmen Miranda, Desi Arnaz, Carmen y Laura Hernández, Ritchie Valens, Eddie Palmieri, Willie Colón, Celia Cruz, the Fania All Stars, José Feliciano, Carlos Santana, Little Joe Hernández, Julio Iglesias... have also factored into the flows of Latin/o music genres.42 For example, the Latin/o music industry, with its network of independent labels, has supported artists such as Carlos Varela and the nueva trova (new ballad) movement with music “grounded...

  2. Federal Support for Energy Efficiency in U.S. Industry: Collaboratively Addressing Energy Management in Small- and Medium-Sized Enterprises (SMEs)

    E-Print Network [OSTI]

    Bostrom, P.; Lung, R. B.; Harris, J.

    2010-01-01T23:59:59.000Z

    The U.S. industrial sector consumes about one-third of energy in the United States each year. Improving energy efficiency in an industrial environment may come with a host of benefits to the facility owner, including a reduction in annual energy...

  3. Federal Support for Energy Efficiency in U.S. Industry: Collaboratively Addressing Energy Management in Small- and Medium-Sized Enterprises (SMEs) 

    E-Print Network [OSTI]

    Bostrom, P.; Lung, R. B.; Harris, J.

    2010-01-01T23:59:59.000Z

    due to its clear links to the creation and retention of quality jobs, U.S. economic competitiveness, domestic energy security and global climate change. This paper explores successful industrial energy efficiency programs established by various...

  4. Prospects for the medium- and long-term development of China`s electric power industry and analysis of the potential market for superconductivity technology

    SciTech Connect (OSTI)

    Li, Z. [Bob Lawrence and Associates, Inc., Alexandria, VA (United States)

    1998-05-01T23:59:59.000Z

    First of all, overall economic growth objectives in China are concisely and succinctly specified in this report. Secondly, this report presents a forecast of energy supply and demand for China`s economic growth for 2000--2050. In comparison with the capability of energy construction in China in the future, a gap between supply and demand is one of the important factors hindering the sustainable development of Chain`s economy. The electric power industry is one of China`s most important industries. To adopt energy efficiency through high technology and utilizing energy adequately is an important technological policy for the development of China`s electric power industry in the future. After briefly describing the achievements of China`s electric power industry, this report defines the target areas and policies for the development of hydroelectricity and nuclear electricity in the 2000s in China, presents the strategic position of China`s electric power industry as well as objectives and relevant plans of development for 2000--2050. This report finds that with the discovery of superconducting electricity, the discovery of new high-temperature superconducting (HTS) materials, and progress in materials techniques, the 21st century will be an era of superconductivity. Applications of superconductivity in the energy field, such as superconducting storage, superconducting transmission, superconducting transformers, superconducting motors, its application in Magneto-Hydro-Dynamics (MHD), as well as in nuclear fusion, has unique advantages. Its market prospects are quite promising. 12 figs.

  5. Liquid chromatographic extraction medium

    DOE Patents [OSTI]

    Horwitz, E. Philip (Naperville, IL); Dietz, Mark L. (Evanston, IL)

    1994-01-01T23:59:59.000Z

    A method and apparatus for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column is described. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water.

  6. Liquid chromatographic extraction medium

    DOE Patents [OSTI]

    Horwitz, E.P.; Dietz, M.L.

    1994-09-13T23:59:59.000Z

    A method and apparatus are disclosed for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water. 1 fig.

  7. alkaline medium peliculas: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    38 The Local Interstellar Medium Astrophysics (arXiv) Summary: The Local Interstellar Medium (LISM) is a unique environment that presents an opportunity to study general...

  8. assessing short medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W. 66 The Local Interstellar Medium Astrophysics (arXiv) Summary: The Local Interstellar Medium (LISM) is a unique environment that presents an opportunity to study general...

  9. aeruginosa culture medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W. 95 The Local Interstellar Medium Astrophysics (arXiv) Summary: The Local Interstellar Medium (LISM) is a unique environment that presents an opportunity to study general...

  10. activation depolarizes medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W. 173 The Local Interstellar Medium Astrophysics (arXiv) Summary: The Local Interstellar Medium (LISM) is a unique environment that presents an opportunity to study general...

  11. Glasma Evolution in Partonic Medium

    E-Print Network [OSTI]

    A. V. Nazarenko

    2010-11-23T23:59:59.000Z

    We examine a scenario of the abelianized Glasma evolution with accounting for back-reaction of partonic medium in ultrarelativistic heavy-ion collisions. We announce that such a generalization leads to the instabilities and the presence of negative color conductivity in the system.

  12. A renewed look at eta' in medium

    E-Print Network [OSTI]

    Youngshin Kwon; Su Houng Lee; Kenji Morita; Gyuri Wolf

    2012-04-14T23:59:59.000Z

    We revisit the question of whether the U_A(1) symmetry is effectively restored in hot and dense medium. In particular, by generalizing the Witten-Veneziano formula to finite temperature, we investigate whether the mass of eta'-meson will change in medium due to the restoration of chiral symmetry.

  13. INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER

    SciTech Connect (OSTI)

    MELINDA KRAHENBUHL

    2010-05-28T23:59:59.000Z

    The U. S. Department of Energy’s Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

  14. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Obeying Environmental Laws Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the...

  15. Industrial Heat Pumps: Where and When 

    E-Print Network [OSTI]

    Ranade, S. M.; Chao, Y. T.

    1989-01-01T23:59:59.000Z

    A brief review of the types of industrial heat pumps is presented. General guidelines are provided for appropriate placement of industrial heat pumps. Industrial applications are used as examples to illustrate key points.

  16. Ontario's Industrial Energy Services Program

    E-Print Network [OSTI]

    Ploeger, L. K.

    .8%! ! ! ! OTHER 8.4%! l4.9%! l4.0%! ! ! ! TOTAL 100.0%! 100.0%! 100.0%! ! PROGRAM STRATEGY Ontario's Industrial Energy Services Program was designed to: lead industrial energy consumers to the realization that increased energy efficiency generates... ONTARIO'S INDUSTRIAL ENERGY SERVICES PROGRAM LINDA K. PLOEGER, GENERAL MANAGER, INDUSTRY PROGRAMS ONTARIO MINISTRY OF ENERGY TORONTO, ONTARIO, ABSTRACT The Ontario Ministry of Energy began offering its new Industrial Energy Services Program...

  17. Abstract--The U.S. power industry is under great pressure to provide reactive power or Var support. Although it is generally

    E-Print Network [OSTI]

    Tolbert, Leon M.

    Abstract--The U.S. power industry is under great pressure to provide reactive power or Var support to provide local reactive power support, a thorough quantitative investigation of the economic benefit reactive power compensation. This paper investigates the benefits including reduced losses, shifting

  18. CEMI Industrial Efficiency (text version) | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Industrial Efficiency and Energy Productivity Video. Well Legrand is a small to medium sized manufacturer. We make electronic products for power, light, and data in the...

  19. Industrial Assessment Center

    SciTech Connect (OSTI)

    Dr. Diane Schaub

    2007-03-05T23:59:59.000Z

    Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

  20. Industrial Engineering Industrial Advisory Board

    E-Print Network [OSTI]

    Gelfond, Michael

    Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

  1. The Neutral Medium

    E-Print Network [OSTI]

    Robert Braun

    2005-01-17T23:59:59.000Z

    We consider the physical conditions of the neutral medium within, and in the environments of, galaxies. The basic physical and morphological properties of the neutral medium within galaxy disks are now quite well-constrained. Systematic variations in temperature and phase-balance (of cool versus warm neutral gas) are indicated as a function of both radius and z-height. Interestingly, the cool medium line-widths are observed to be dominated by turbulent energy injection within cells of 10 pc to 1 kpc size. Deep new observations reveal that 5-10% of the neutral medium is associated within an extended halo which rotates more slowly and experiences radial inflow. Much of this component is likely to be associated with a ``galactic fountain'' type of phenomenon. However, compelling evidence is also accumulating for the importance of tidal disruption of satellites as well as continuous accretion (of both diffuse and discrete components) in fueling galaxy halos and disks. Continued fueling is even observed on scales of 100's of kpc in galaxy environments, where the neutral component is likely to be merely a trace constituent of a highly ionized plasma.

  2. Oklahoma Industrial Energy Management Program

    E-Print Network [OSTI]

    Turner, W. C.; Estes, C. B.

    1982-01-01T23:59:59.000Z

    In Oklahoma, industry consumes about 35% of the total energy consumed. While it is true that much work has been done in the larger companies, most small to medium sized companies have yet to undertake a substantial energy management program. Often...

  3. Fermion dispersion in axion medium

    E-Print Network [OSTI]

    N. V. Mikheev; E. N. Narynskaya

    2008-12-02T23:59:59.000Z

    The interaction of a fermion with the dense axion medium is investigated for the purpose of finding an axion medium effect on the fermion dispersion. It is shown that axion medium influence on the fermion dispersion under astrophysical conditions is negligible small if the correct Lagrangian of the axion-fermion interaction is used.

  4. Energy Efficiency Programs for Small and Medium Sized Industry

    E-Print Network [OSTI]

    Shipley, A. M.; Elliott, R. N.

    0.24 0.28 0.24 0.25 Electronic Equipment 0.21 0.22 0.2 0.23 SIC 36 All Manufacturing 13.62 15.49 15.03 16.52 Source: http://www.ela.doe.gov/emeu/mecs/ Table 2. Energy Intensity in the Manufacturing Sector Energy Intensity (Thousand Btu per... Btu per 1992 constant dollars) 3.84 I 3.88 I 3.97 I 4.01 Change in Energy Efficiency (percent) All Manufacturing -4.43 Source:http://www.ela.doe.gov/emeu/mecs/ fluctuations in electricity and fuel pricing. According to the MECS data...

  5. Energy Recovery for Medium- and High-Temperature Industrial Furnaces

    E-Print Network [OSTI]

    Krumm, E. D.

    1981-01-01T23:59:59.000Z

    and potassium chloride salts and halogens. Off-line fluxing does not completely eliminate the presence of these materials, which cause corrosion and possibly plug ging. The oil and other foreign materials in alum inum scrap burn off, causing periodic...

  6. Energy Efficiency Programs for Small and Medium Sized Industry 

    E-Print Network [OSTI]

    Shipley, A. M.; Elliott, R. N.

    2001-01-01T23:59:59.000Z

    markets, though a market failure may exist. Second, traditional business theory on investment behavior may need to be modified. Many analysts have suggested that there may be both economic and engineering explanations for the energy efficiency gap... in two major ways. First to produce heat, mechanical power, and to generate electricity. Second, as a raw material input to the manufacturing process or for some other non fuel use purpose. This does not include what is known as feedstock energy...

  7. Demand response medium sized industry consumers (Smart Grid Project) | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A Potential Microhydro SiteDayton Power & LightDemand

  8. Department of Industrial Engineering and Management Sciences Northwestern University, Evanston, Illinois, 60208-3119, U.S.A.

    E-Print Network [OSTI]

    Hazen, Gordon

    Department of Industrial Engineering and Management Sciences Northwestern University, Evanston in Anisotropic Medium Irina S. Dolinskaya Department of Industrial Engineering and Management Sciences, Northwestern University e-mail: dolira@northwestern.edu Alvaro Maggiar Department of Industrial Engineering

  9. Analysis of asset health : an approach to monitoring and diagnostics for medium voltage circuit breakers

    E-Print Network [OSTI]

    Corona, Erick (Erick Gustavo)

    2013-01-01T23:59:59.000Z

    The Medium Voltage Electric Industry is a very conservative and risk adverse sector that has undergone very little change in the past 30 years when compared to other technologically dependent activities; this reality is ...

  10. Industrial Energy Use Indices

    E-Print Network [OSTI]

    Hanegan, A.; Heffington, W. M.

    2007-01-01T23:59:59.000Z

    of variations for all industry types in warm versus cold regions of the U.S. generally is greater than unity. Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used...

  11. OTHER INDUSTRIES

    Broader source: Energy.gov [DOE]

    AMO funded research results in novel technologies in diverse industries beyond the most energy intensive ones within the U.S. Manufacturing sector. These technologies offer quantifiable energy...

  12. Communication Definitions... general definition

    E-Print Network [OSTI]

    Jones, Ian L.

    Communication Definitions... general definition "the process of conveying information from a sender to a receiver with the use of a medium in which the communicated information is understood the same way by both sender and receiver" (Wikipedia)! Biological communication Action by one organism (individual

  13. ITP Industrial Distributed Energy: Microturbine Power Conversion...

    Broader source: Energy.gov (indexed) [DOE]

    added to internal combustion generator line No Power converter will be purchased from Turbo Genset General Electric, Global Research Center & GE Industrial Developing...

  14. Oklahoma Industrial Energy Management Program 

    E-Print Network [OSTI]

    Estes, C. B.; Turner, W. C.

    1980-01-01T23:59:59.000Z

    usage continues to rise. With this informa tion, Oklahoma embarked upon a program to help indus try (particularly small to medium sized ones) meet the challenge. Program Objectives The primary objective of the program can be stated simply as: "To... for the country and necessary for her to be competitive in the International marketplace. PROGRAM DESCRIPTION The first step was to develop a symbol that year tenure of the.program. The conferences have concentrated on the industrialized areas of Tulsa...

  15. Open bottom mesons in hot asymmetric hadronic medium

    E-Print Network [OSTI]

    Divakar Pathak; Amruta Mishra

    2014-09-02T23:59:59.000Z

    The in-medium masses and optical potentials of $B$ and ${\\bar B}$ mesons are studied in an isospin asymmetric, strange, hot and dense hadronic environment using a chiral effective model. The chiral $SU(3)$ model originally designed for the light quark sector, is generalized to include the heavy quark sector ($c$ and $b$) to derive the interactions of the $B$ and $\\bar B$ mesons with the light hadrons. Due to large mass of bottom quark, we use only the empirical form of these interactions for the desired purpose, while treating the bottom degrees of freedom to be frozen in the medium. Hence, all medium effects are due to the in-medium interaction of the light quark content of these open-bottom mesons. Both $B$ and $\\bar B$ mesons are found to experience net attractive interactions in the medium, leading to lowering of their masses in the medium. The mass degeneracy of particles and antiparticles, ($B^+$, $B^-$) as well as ($B^0$, ${\\bar B}^0$), is observed to be broken in the medium, due to equal and opposite contributions from a vectorial Weinberg-Tomozawa interaction term. Addition of hyperons to the medium lowers further the in-medium mass for each of these four mesons, while a non-zero isospin asymmetry is observed to break the approximate mass degeneracy of each pair of isospin doublets. These medium effects are found to be strongly density dependent, and bear a considerably weaker temperature dependence. The results obtained in the present investigation are compared to predictions from the quark-meson coupling model, heavy meson effective theory, and the QCD Sum Rule approach.

  16. The Analysis and Development of Large Industrial Steam Systems

    E-Print Network [OSTI]

    Waterland, A. F.

    1980-01-01T23:59:59.000Z

    Chemicals, petroleum, pulp and paper, and many other industries depend heavily on extensive complex steam systems for thermal and mechanical energy delivery. Steam's versatility and desirable characteristics as both a heat transfer medium and a...

  17. Medium and Heavy Duty Vehicle Field Evaluations (Presentation)

    SciTech Connect (OSTI)

    Walkowicz, K.

    2014-06-01T23:59:59.000Z

    This presentation discusses field evaluations of medium- and heavy-duty vehicles performed by NREL. The project provides medium-duty (MD) and heavy-duty (HD) test results, aggregated data, and detailed analysis, including 3rd party unbiased data (data that would not normally be shared by industry in an aggregated and detailed manner). Over 5.6 million miles of advanced technology MD and HD truck data have been collected, documented, and analyzed on over 240 different vehicles since 2002. Data, analysis, and reports are shared within DOE, national laboratory partners, and industry for R&D planning and strategy. The results help guide R&D for new technology development, help define intelligent usage of newly developed technology, and help fleets/users understand all aspects of advanced technology.

  18. Markets for low- and medium-Btu coal gasification: an analysis of 13 site specific studies

    SciTech Connect (OSTI)

    Not Available

    1981-09-01T23:59:59.000Z

    In 1978 the US Department of Energy (DOE), through its Office of Resource Applications, developed a commercialization plan for low- and medium-Btu coal gasification. Several initial steps have been taken in that process, including a comprehensive study of industrial markets, issuance of a Notice of Program Interest, and funding of proposals under the Alternate Fuels Legislation (P.L. 96-126). To assist it in the further development and administration of the commercialization plan, the Office of Resource Applications has asked Booz, Allen and Hamilton to assess the market prospects for low- and medium-Btu coal gasification. This report covers the detailed findings of the study. Following the introduction which discusses the purpose of the study, approach used for the assignment and current market attitudes on coal gasification, there are three chapters on: systems configurations and applications; economic and finanical attractiveness; and summary of management decisions based on feasibility study results. The final chapter briefly assesses the management decisions. The general consensus seems to be that coal gasification is a technology that will be attractive in the future but is marginal now. 6 figures, 5 tables.

  19. Guidelines for Estimating Unmetered Industrial Water Use

    SciTech Connect (OSTI)

    Boyd, Brian K.

    2010-08-01T23:59:59.000Z

    The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

  20. Energy Conservation Through Improved Industrial Ventilation in Small and Medium-Sized Industrial Plants

    E-Print Network [OSTI]

    Saman, N. F.; Nutter, D. W.

    of the baghouses at the zinc plant and the main dust collector filter at the diapers plant, prevents high static pressure build up in the air cleaning system. The power savings (hp) associated with one inch rise in the static pressure was calculated from equations... of the baghouses at the zinc plant and the main dust collector filter at the diapers plant, prevents high static pressure build up in the air cleaning system. The power savings (hp) associated with one inch rise in the static pressure was calculated from equations...

  1. MIT and Automotive Industries MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    MIT and Automotive Industries MIT Industry Brief MIT's Industrial Liaison Program (ILP) can bring@ilp.mit.edu, or visit http://ilp-www.mit.edu. MIT and Automotive Industries The Massachusetts Institute of Technology (MIT) is a leading center of research and education on topics important to the automotive industry

  2. Business models and strategies in the video game industry : an analysis of Activision-Blizzard and Electronic Arts

    E-Print Network [OSTI]

    Lee, Ruri

    2013-01-01T23:59:59.000Z

    In recent years the video game industry has been of great importance in the business world beyond the role of a cultural medium. With its huge size and potential for more growth, the industry has attracted many newcomers. ...

  3. Coal industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  4. Coal industry annual 1993

    SciTech Connect (OSTI)

    Not Available

    1994-12-06T23:59:59.000Z

    Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

  5. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users The

  6. Industry @ ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users

  7. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFP »summerlectures [ICO]default Sign InIndustrial

  8. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  9. Industrial Decision Making 

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01T23:59:59.000Z

    and industrial investment decision-making. The paper will also address several important questions: • Why has industrial investment declined? • What is the outlook for industrial investment? • How can programs engage industry for future opportunities?...

  10. Coal Industry Annual 1995

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

  11. Coal industry annual 1996

    SciTech Connect (OSTI)

    NONE

    1997-11-01T23:59:59.000Z

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

  12. Instructions 3000-940-151 -B Bsckm3n Industrial"

    E-Print Network [OSTI]

    Kleinfeld, David

    INDUSTRIAL CORPORATION A SUBSIDIARY OF EMERSON ELECTRIC CO BREA, CA 92621 Beckman Industrial Corp. Brea, CAA Small Board Assembly 12 SIX SPECIFICATIONS 14 6.1 General Specifications 14 6.2 Electrical

  13. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  14. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  15. Generalized parton distributions of nuclei

    SciTech Connect (OSTI)

    Guzey, V. [Theory Center, Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States)

    2009-12-17T23:59:59.000Z

    We review recent theoretical results on generalized parton distributions (GPDs) of nuclei, emphasizing the following three roles of nuclear GPDs: (i) complementarity to free proton GPDs, (ii) the enhancement of traditional nuclear effects such nuclear binding, EMC effect, nuclear shadowing, and (iii) an access to novel nuclear effects such as medium modifications of bound nucleons.

  16. The Interstellar Medium Surrounding the Sun

    E-Print Network [OSTI]

    Royer, Dana

    interstellar medium (ISM) suggest an in- homogeneous Galactic environment, with shocks that destroy grainsThe Interstellar Medium Surrounding the Sun Priscilla C. Frisch,1 Seth Redfield,2 and Jonathan D by Annual Reviews. All rights reserved 0066-4146/11/0922-0237$20.00 Keywords interstellar medium

  17. Industrial and Agricultural Production Efficiency Program

    Broader source: Energy.gov [DOE]

    Energy Trust of Oregon offers the Industrial and Agricultural Production Efficiency Program to customers of Portland General Electric, Pacific Power, NW Natural and Cascade Natural Gas. In order to...

  18. Medium Effects in Parton Distributions

    SciTech Connect (OSTI)

    William Detmold, Huey-Wen Lin

    2011-12-01T23:59:59.000Z

    A defining experiment of high-energy physics in the 1980s was that of the EMC collaboration where it was first observed that parton distributions in nuclei are non-trivially related to those in the proton. This result implies that the presence of the nuclear medium plays an important role and an understanding of this from QCD has been an important goal ever since Here we investigate analogous, but technically simpler, effects in QCD and examine how the lowest moment of the pion parton distribution is modified by the presence of a Bose-condensed gas of pions or kaons.

  19. Analysis, simulation and impedance operator of a non local model of porous medium for

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    of a porous wall devoted to aircraft motor noise reduction. For such a medium, the parameters motor noise reduction is currently an important challenge for aerospace industry. Control of acoustic manuscript, published in "Journal of Vibration and Control (2013) -" DOI : 10.1177/1077546313493815 #12

  20. Type Toyota Management Systems (MSTT) of small and medium-sized enterprises in mechanical and electrical

    E-Print Network [OSTI]

    Boyer, Edmond

    of a study, dealing with the topic of Type Toyota Management Systems. In the survey SMEs in mechanicalType Toyota Management Systems (MSTT) of small and medium-sized enterprises in mechanical; Institute of Industrial Manufacturing and Management (IFF), University of Stuttgart, Nobelstr. 12, D-70569

  1. Electric Utility Industry Update

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

  2. Uranium industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-04-01T23:59:59.000Z

    This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

  3. CASL Industry Council Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IndustryCouncil.shtml The new members that joined the Industry Council include NPP owneroperators with analysis capability: Tyrone Stevens of Exelon, and SMR vendors:...

  4. The future steelmaking industry and its technologies

    SciTech Connect (OSTI)

    Fruehan, R.J.; Paxton, H.W.; Giarratani, F.; Lave, L. [Carnegie-Mellon Univ., Pittsburgh, PA (United States)]|[Pittsburgh Univ., PA (United States)

    1995-01-01T23:59:59.000Z

    The objective of this report is to develop a vision of the future steelmaking industry including its general characteristics and technologies. In addition, the technical obstacles and research and development opportunities for commercialization of these technologies are identified. The report is being prepared by the Sloan Steel Industry Competitiveness Study with extensive input from the industry. Industry input has been through AISI (American Iron and Steel Institute), SMA (Steel Manufacturers Association) and contacts with individual company executives and technical leaders. The report identifies the major industry drivers which will influence technological developments in the industry for the next 5--25 years. Initially, the role of past drivers in shaping the current industry was examined to help understand the future developments. Whereas this report concentrates on future technologies other major factors such as national and international competition, human resource management and capital concerns are examined to determine their influence on the future industry. The future industry vision does not specify specific technologies but rather their general characteristics. Finally, the technical obstacles and the corresponding research and development required for commercialization are detailed.

  5. Interaction of gravitational waves with an elastic solid medium

    E-Print Network [OSTI]

    B. Carter

    2001-02-28T23:59:59.000Z

    Contents. 1. Introduction. 2. Kinematics of a Material Medium: Material Representation. 3. Kinematics of a Material Medium: Convected Differentials. 4. Kinematics of a Perfect Elastic Medium. 5. Small Gravitational Perturbations of an Elastic Medium.

  6. Challenges of electric power industry restructuring for fuel suppliers

    SciTech Connect (OSTI)

    NONE

    1998-09-01T23:59:59.000Z

    The purpose of this report is to provide an assessment of the changes in other energy industries that could occur as the result of restructuring in the electric power industry. This report is prepared for a wide audience, including Congress, Federal and State agencies, the electric power industry, and the general public. 28 figs., 25 tabs.

  7. Empirical Regularities of Asymmetric Pricing in the Gasoline Industry

    E-Print Network [OSTI]

    Niebur, Ernst

    pricing in the retail gasoline industry, and also documents empirical regularities in the market. I find of asymmetric price movements in the retail gasoline industry. Yet, there is no general agreement as to whether asym- metric pricing is widespread throughout the retail gasoline industry or merely an anomaly

  8. Waste Heat-to-Power in Small Scale Industry Using Scroll Expander...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is to develop the scroll expander for ORC systems to be used in industrial and commercial medium-grade waste heat recovery applications, and to validate and quantify the benefits...

  9. Enrichment of the Intracluster Medium

    E-Print Network [OSTI]

    D. Thomas

    1998-11-25T23:59:59.000Z

    The relevance of galaxies of different luminosity and mass for the chemical enrichment of the intracluster medium (ICM) is analysed. For this purpose, I adopt the composite luminosity function of cluster galaxies from Trentham (1998), which exhibits a significant rise at the very faint end. The model - adopting a universal Salpeter IMF - is calibrated on reproducing the M_Fe/L_tot, M_Fe/M_*, and alpha/Fe ratios observed in clusters. Although the contribution to total luminosity and ICM metals peaks around L* galaxies (M* approx -20), faint objects with M_B>-18 still provide at least 30 per cent of the metals present in the ICM. In consistency with the solar alpha/Fe ratios determined by {ASCA}, the model predicts that 60 per cent of the ICM iron comes from Type Ia supernovae. The predicted slope of the relation between intracluster gas mass and cluster luminosity emerges shallower than the observed one, indicating that the fraction of primordial gas increases with cluster richness.

  10. Industry Analysis February 2013

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    technology ­ Clean tech/ clean technology #12;7 Industry Studies · IbisWorld ­ U.S. and global industry-Industries · Biodiesel ­ Biofuel ­ Alternate fuels ­ Green fuels ­ Renewable fuels/energy ­ Green energy ­ Green Canada, Census, Industry Canada, the OECD, European Union, IMF, World Bank, UN . . . Never pay for stats

  11. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    : Occupational biomechanics, work physiology, industrial ergonomics, environmental hygiene, cognitive engineeringINDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor

  12. Light scattering by radiation fields: the optical medium analogy

    E-Print Network [OSTI]

    Donato Bini; Pierluigi Fortini; Andrea Geralico; Maria Haney; Antonello Ortolan

    2014-08-23T23:59:59.000Z

    The optical medium analogy of a radiation field generated by either an exact gravitational plane wave or an exact electromagnetic wave in the framework of general relativity is developed. The equivalent medium of the associated background field is inhomogeneous and anisotropic in the former case, whereas it is inhomogeneous but isotropic in the latter. The features of light scattering are investigated by assuming the interaction region to be sandwiched between two flat spacetime regions, where light rays propagate along straight lines. Standard tools of ordinary wave optics are used to study the deflection of photon paths due to the interaction with the radiation fields, allowing for a comparison between the optical properties of the equivalent media associated with the different background fields.

  13. Green's Function expansion of scalar and vector fields in the presence of a medium

    E-Print Network [OSTI]

    Fardin Kheirandish; Shahriar Salimi

    2010-10-17T23:59:59.000Z

    Based on a canonical approach and functional-integration techniques, a series expansion of Green's function of a scalar field, in the presence of a medium, is obtained. A series expansion for Lifshitz-energy, in finite-temperature, in terms of the susceptibility of the medium is derived and the whole formalism is generalized to the case of electromagnetic field in the presence of some dielectrics. A covariant formulation of the problem is presented.

  14. Hot Plasma Waves Surrounding the Schwarzschild Event Horizon in a Veselago Medium

    E-Print Network [OSTI]

    M. Sharif; Noureen Mukhtar

    2011-01-05T23:59:59.000Z

    This paper investigates wave properties of hot plasma in a Veselago medium. For the Schwarzschild black hole, the $3+1$ GRMHD equations are re-formulated which are linearly perturbed and then Fourier analyzed for rotating (non-magnetized and magnetized) plasmas. The graphs of wave vector, refractive index and change in refractive are used to discuss the wave properties. The results obtained confirm the presence of Veselago medium for both rotating (non-magnetized and magnetized) plasmas. This work generalized the isothermal plasma waves in the Veselago medium to hot plasma case.

  15. Axion-medium effect on fermion dispersion

    SciTech Connect (OSTI)

    Mikheev, N. V., E-mail: mikheev@uniyar.ac.ru; Narynskaya, E. N., E-mail: elenan@uniyar.ac.r [Yaroslavl State University (Russian Federation)

    2008-08-15T23:59:59.000Z

    The interaction of fermions with a dense axion medium is considered with the aim of studying the effect of the axionmediumon fermion dispersion. It is shown that, if use is made of a correct Lagrangian for axion-fermion interaction, the effect of a dense axion medium on fermion dispersion is negligible under real astrophysical conditions.

  16. Generalized parton distributions in nuclei

    SciTech Connect (OSTI)

    Vadim Guzey

    2009-12-01T23:59:59.000Z

    Generalized parton distributions (GPDs) of nuclei describe the distribution of quarks and gluons in nuclei probed in hard exclusive reactions, such as e.g. deeply virtual Compton scattering (DVCS). Nuclear GPDs and nuclear DVCS allow us to study new aspects of many traditional nuclear effects (nuclear shadowing, EMC effect, medium modifications of the bound nucleons) as well as to access novel nuclear effects. In my talk, I review recent theoretical progress in the area of nuclear GPDs.

  17. Industrial energy-efficiency-improvement program

    SciTech Connect (OSTI)

    Not Available

    1980-12-01T23:59:59.000Z

    Progress made by industry toward attaining the voluntary 1980 energy efficiency improvement targets is reported. The mandatory reporting population has been expanded from ten original industries to include ten additional non-targeted industries and all corporations using over one trillion Btu's annually in any manufacturing industry. The ten most energy intensive industries have been involved in the reporting program since the signing of the Energy Policy and Conservation Act and as industrial energy efficiency improvement overview, based primarily on information from these industries (chemicals and allied products; primary metal industry; petroleum and coal products; stone, clay, and glass products; paper and allied products; food and kindred products; fabricated metal products; transportation equipment; machinery, except electrical; and textile mill products), is presented. Reports from industries, now required to report, are included for rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products. Additional data from voluntary submissions are included for American Gas Association; American Hotel and Motel Association; General Telephone and Electronics Corporation; and American Telephone and Telegraph Company. (MCW)

  18. Quantization of general linear electrodynamics

    SciTech Connect (OSTI)

    Rivera, Sergio; Schuller, Frederic P. [Albert Einstein Institute, Max Planck Institute for Gravitational Physics, Am Muehlenberg 1, 14476 Potsdam (Germany)

    2011-03-15T23:59:59.000Z

    General linear electrodynamics allow for an arbitrary linear constitutive relation between the field strength 2-form and induction 2-form density if crucial hyperbolicity and energy conditions are satisfied, which render the theory predictive and physically interpretable. Taking into account the higher-order polynomial dispersion relation and associated causal structure of general linear electrodynamics, we carefully develop its Hamiltonian formulation from first principles. Canonical quantization of the resulting constrained system then results in a quantum vacuum which is sensitive to the constitutive tensor of the classical theory. As an application we calculate the Casimir effect in a birefringent linear optical medium.

  19. Design of Industrial Process Refrigeration Systems

    E-Print Network [OSTI]

    Witherell, W. D.

    of the study is discussed in terms of identifying refrigeration intensive processes. Specific and general conclusions are presented to help faci I itate proper industrial refrigeration system design throughout fhe industry. This paper presents the resul ts... custaner's specifications. Most systems fall into two broad categories: Vapor Canpression Refrigeration Cycles - Mechanical or Steam Jet Canpression Systems Absorption Refrigeration Cycles - Heat Operated Cycles As shown in Table I, refrigerations...

  20. On viscosity, conduction and sound waves in the intracluster medium

    E-Print Network [OSTI]

    A. C. Fabian; C. S. Reynolds; G. B. Taylor; R. J. H. Dunn

    2005-08-04T23:59:59.000Z

    Recent X-ray and optical observations of the Perseus cluster indicate that the viscous and conductive dissipation of sound waves is the mechanism responsible for heating the intracluster medium and thus balancing radiative cooling of cluster cores. We discuss this mechanism more generally and show how the specific heating and cooling rates vary with temperature and radius. It appears that the heating mechanism is most effective above 10^7K, which allows for radiative cooling to proceed within normal galaxy formation but will stifle the growth of very massive galaxies. The scaling of the wavelength of sound waves with cluster temperature and feedback in the system are investigated.

  1. Tunneling properties of nonplanar molecules in a gas medium

    SciTech Connect (OSTI)

    Bahrami, Mohammad [Department of Chemistry, Sharif University of Technology, P.O. Box 11365-9516, Tehran (Iran, Islamic Republic of); The Abdus Salam ICTP, Strada Costiera 11, I-34151 Trieste (Italy); Bassi, Angelo [Department of Physics, University of Trieste, Strada Costiera 11, I-34151 Trieste (Italy); Istituto Nazionale di Fisica Nucleare, Trieste Section, Via Valerio 2, I-34127 Trieste (Italy)

    2011-12-15T23:59:59.000Z

    We propose a simple, general, and accurate formula for analyzing the tunneling between classical configurations of a nonplanar molecule in a gas medium, as a function of the thermodynamic parameters of the gas. We apply it to two interesting cases: (i) the shift to zero frequency of the inversion line of ammonia, upon an increase in the pressure of the gas; and (ii) the destruction of the coherent tunneling of D{sub 2}S{sub 2} molecules in a He gas. In both cases, we compare our analysis with previous theoretical and experimental results.

  2. Holographic Nucleons in the Nuclear Medium

    E-Print Network [OSTI]

    Bum-Hoon Lee; Chanyong Park

    2015-03-12T23:59:59.000Z

    We investigate the nucleon's rest mass and dispersion relation in the nuclear medium which is holographically described by the thermal charged AdS geometry. On this background, the chiral condensate plays an important role to determine the nucleon's mass in both the vacuum and the nuclear medium. It also significantly modifies the nucleon's dispersion relation. The nucleon's mass in the high density regime increases with density as expected, while in the low density regime it slightly decreases. We further study the splitting of the nucleon's masses caused by the isospin interaction with the nuclear medium.

  3. Method to prepare nanoparticles on porous mediums

    DOE Patents [OSTI]

    Vieth, Gabriel M. (Knoxville, TN) [Knoxville, TN; Dudney, Nancy J. (Oak Ridge, TN) [Oak Ridge, TN; Dai, Sheng (Knoxville, TN) [Knoxville, TN

    2010-08-10T23:59:59.000Z

    A method to prepare porous medium decorated with nanoparticles involves contacting a suspension of nanoparticles in an ionic liquid with a porous medium such that the particles diffuse into the pores of the medium followed by heating the resulting composition to a temperature equal to or greater than the thermal decomposition temperature of the ionic liquid resulting in the removal of the liquid portion of the suspension. The nanoparticles can be a metal, an alloy, or a metal compound. The resulting compositions can be used as catalysts, sensors, or separators.

  4. 1 Edgar Nett Mobile Computer Communication SS'10 General Overview

    E-Print Network [OSTI]

    1 Edgar Nett Mobile Computer Communication SS'10 General Overview Wireless Transmission Medium Layer Mobile Transport Layer WLAN Security #12;2 Edgar Nett Mobile Computer Communication SS'10 Medium Access Control (MAC Layer) #12;3 Edgar Nett Mobile Computer Communication SS'10 Can we apply media access

  5. The Industrial Electrification Program

    E-Print Network [OSTI]

    Harry, I. L.

    1982-01-01T23:59:59.000Z

    EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

  6. Electrotechnologies in Process Industries

    E-Print Network [OSTI]

    Amarnath, K. R.

    The Industrial Program at the Electric Power Research Institute (EPRI) promotes the efficient use of electricity to improve the competitive position of the American industry. Electrotechnologies that improve productivity, improve quality...

  7. and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    technologicalandlogisticssystemsbygathering, structuring, and managing information. Indus- trial engineers apply their knowledge not only45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle

  8. Demographics and industry returns

    E-Print Network [OSTI]

    Pollet, Joshua A.; DellaVigna, Stefano

    2007-01-01T23:59:59.000Z

    Industry category Child care Children’s books Children’s clothing Toysindustry Child care Children’s books Children’s clothing ToysIndustries are associated with high demand by children (child care, toys) and

  9. INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY

    E-Print Network [OSTI]

    Pohl, Karsten

    INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

  10. Industry Analysis October 2010

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    Different regulations for some industries in Canada, the U.S. and Europe ie. telecommunications, energy of energy, materials, industrial waste, byproducts #12;Contact Constance Adamson Stauffer Library adamsonc

  11. General Engineers

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin:DeploymentSite Name:24, 2014long version)short

  12. Geothermal Industry Partnership Opportunities

    Broader source: Energy.gov [DOE]

    Here you'll find links to information about partnership opportunities and programs for the geothermal industry.

  13. Medium Duty ARRA Data Reporting and Analysis (Presentation)

    SciTech Connect (OSTI)

    Walkowicz, K.

    2014-06-01T23:59:59.000Z

    This project compiles medium-duty (MD) aggregated deployment data and provides the compiled detailed analyses to industry. The U.S. Department of Energy's (DOE's) American Recovery and Reinvestment Act (ARRA) deployment and demonstration projects are helping to commercialize technologies for all-electric vehicles, electrified accessories, and electric charging infrastructure. Over 3.2 million miles of in-service all-electric MD truck data from 560 different vehicles have been collected since 2011, and usage data from over 1,000 truck electrification sites have been collected since 2013. Through the DOE's Vehicle Technologies Office, NREL is working to analyze real-time data from these deployment and demonstration projects to quantify the benefits: results and summary statistics are made available through the NREL website as quarterly and annual reports; 23 aggregated reports have been published on the performance and operation of these vehicles; and detailed data are being extracted to help further understand battery use and performance.

  14. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

  15. Incompatibility of Contrast Medium and Trisodium Citrate

    SciTech Connect (OSTI)

    Delcour, Christian, E-mail: christian.delcour@chu-charleroi.be; Bruninx, Guy [CHU de Charleroi, Department of Radiology (Belgium)] [CHU de Charleroi, Department of Radiology (Belgium)

    2013-02-15T23:59:59.000Z

    To test the compatibility of trisodium citrate, a catheter lock solution, with iodinated contrast medium. Iohexol, iobitridol, iodixanol, ioxaglate, ioxithalamate, iomeprol, and iopromide were tested. In all tests, 2 ml of contrast medium were mixed with 2 ml of trisodium citrate solution. Iodixanol and ioxaglate provoked a highly viscous gluelike precipitation when mixed with trisodium citrate. A brief transient precipitate was observed with iohexol, iomeprol, and ioxithalamate. Permanent precipitation occurred with iobitridol and iopromide. One must be aware of the potential for precipitation when contrast medium is mixed with trisodium citrate solution. Before trisodium citrate solution is injected, the catheter should be thoroughly flushed with saline if a contrast medium has previously been injected through it.

  16. Special light trajectories in optical medium

    E-Print Network [OSTI]

    Miroslav Pardy

    2010-08-12T23:59:59.000Z

    The Fermat principle is used to define trajectories in nonhomogenous optical media. The Poincare model of the Lobachevskii geometry is derived. The index of refraction is determined for the light confined in the circular trajectory in the optical medium.

  17. Charmonium in medium: From correlators to experiment

    E-Print Network [OSTI]

    Zhao, Xingbo; Rapp, Ralf.

    2010-01-01T23:59:59.000Z

    We set up a framework in which in-medium charmonium properties are constrained by thermal lattice quantum chromodynamics and subsequently implemented into a thermal rate equation enabling the comparison with experimental data in heavy-ion collisions...

  18. General Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall ATours,Dioxide andNationalallGeneralGeneral

  19. General Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental AssessmentsGeoffrey Campbelllong version)Confinement |GeneralGeneral

  20. General Recommendations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental AssessmentsGeoffrey Campbelllong version)Confinement |GeneralGeneral»

  1. Industrial Dojo Program Fosters Industrial Internet Development...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE Launches Cloud Foundry 'Industrial Dojo,' Contributes to Open Source to Foster Continued...

  2. Industrial policy and the Indian electronics industry

    E-Print Network [OSTI]

    Love, Robert (Robert Eric)

    2008-01-01T23:59:59.000Z

    Recently, production within India's Electronics sector amounted to a low $12 billion when compared to the global output of $1400 billion. The slow growth in the local industry is often judged to be the result of late ...

  3. General Merchandise 50% Energy Savings Technical Support Document

    SciTech Connect (OSTI)

    Hale, E.; Leach, M.; Hirsch, A.; Torcellini, P.

    2009-09-01T23:59:59.000Z

    This report documents technical analysis for medium-box general merchandise stores aimed at providing design guidance that achieves whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

  4. LANSCE | Lujan Center | Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Users The Lujan Neutron Scattering Center offers a diverse set of capabilities and instruments for industrial projects. Industrial users are invited to contact Fredrik...

  5. Analysis of energy-efficiency investment decisions by small and medium-sized manufacturers

    SciTech Connect (OSTI)

    Woodruff, M.G.; Roop, J.M.; Seely, H.E. [Pacific Northwest National Lab., Richland, WA (United States); Muller, M.R. [Rutgers--the State Univ., New Brunswick, NJ (United States); Jones, T.W. [Alliance to Save Energy, Washington, DC (United States); Dowd, J. [USDOE, Washington, DC (United States)

    1996-05-01T23:59:59.000Z

    This report highlights the results of a comprehensive analysis of investment decisions regarding energy-efficiency measures at small and medium-sized manufacturing plants. The analysis is based on the experiences of companies participating in the DOE Industrial Assessment Center (IAC) program. The IAC program is a network of university-based centers that provides energy and waste assessments to small and medium-sized manufacturing plants. The purposes of this report are to do the following: (1) Examine what the data collected reveal about patterns of implementation of recommended energy- efficiency measures, (2) Evaluate how various factors, such as the type of industry, the characteristics of the manufacturing plants, or the cost of the measures, appear to effect implementation rates, (3) Examine reasons why recommended energy-saving measures are accepted or rejected.

  6. Industrial waste reduction: The process problem

    SciTech Connect (OSTI)

    Valentino, F.W.; Walmet, G.E.

    1986-09-01T23:59:59.000Z

    Industrial waste problems, especially those involving hazardous waste, seem to be pervasive. The national media report newly discovered waste problems and sites with alarming regularity. Examples that immediately come to mind are Love Canal, New York; Times Beach, Missouri; and Seveso, Italy. Public perceptions of the industrial waste problem, reflecting the media's focus, appear to be that: large corporations are solely responsible for creating waste dumps, and the only role of government is to prevent illegal dumping and to regulate, fine, and require corporations to rectify the problem; all efforts should be directed toward preventing illegal dumping and treatment of the existing waste dumps; all industrial wastes can be classified as hazardous in nature. This general impression is both inaccurate and incomplete. All industrial waste is not hazardous (although most of it is not benign). All waste producers are not large corporations: nearly all industries produce some wastes. And, while existing waste sites must be effectively treated, additional efforts are needed at other points in the industrial waste cycle. Most people would agree both that waste dumping must be carefully regulated because of its negative impacts on the environment and that the less waste the better, even with carefully regulated disposal. Since nearly all industry now produces some waste and no one expects industry to shut down to resolve the waste problem, other strategies need to be available to deal with the problem at the front end. This paper discusses alternative strategies.

  7. Breathing dynamics of an asymmetric Gaussian beam propagating in a saturable absorbing medium

    SciTech Connect (OSTI)

    Ianetz, D.; Kaganovskii, Yu.; Rosenbluh, M. [Jack and Pearl Resnick Institute for Advanced Technology, Department of Physics, Bar-Ilan University, Ramat-Gan IL-52900 (Israel); Wilson-Gordon, A. D. [Department of Chemistry, Bar-Ilan University, Ramat Gan IL-52900 (Israel)

    2010-12-15T23:59:59.000Z

    Propagation of an asymmetric Gaussian beam in a medium with saturated nonlinear refractive index is analyzed using a 'collective variable approach' to solve the general nonlinear Schroedinger equation and compared with that of a symmetric beam in both lossless and lossy media. For a lossless medium, we construct a diagram which defines regions of oscillatory and diffractive propagation of an asymmetric beam and compare it with that of a symmetric beam. We detect breathing dynamics of the widths and amplitude of the asymmetric beam in the oscillatory regime of propagation and identify two different types of width and amplitude beating, Type 1 and 2, depending on the initial beam energy and saturation constant of the medium. This is in contrast to a cubic-quintic medium where only one type of beating is obtained.

  8. Uranium industry annual 1998

    SciTech Connect (OSTI)

    NONE

    1999-04-22T23:59:59.000Z

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

  9. Uranium industry annual 1994

    SciTech Connect (OSTI)

    NONE

    1995-07-05T23:59:59.000Z

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

  10. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  11. Ethanol production using a soy hydrolysate-based medium or a yeast autolysate-based medium

    DOE Patents [OSTI]

    Ingram, Lonnie O. (Gainesville, FL)

    2000-01-01T23:59:59.000Z

    This invention presents a method for the production of ethanol that utilizes a soy hydrolysate-based nutrient medium or a yeast autolysate-based medium nutrient medium in conjunction with ethanologenic bacteria and a fermentable sugar for the cost-effective production of ethanol from lignocellulosic biomass. The invention offers several advantages over presently available media for use in ethanol production, including consistent quality, lack of toxins and wide availability.

  12. Small- and Medium-Size Building Automation and Control System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging...

  13. Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration...

    Broader source: Energy.gov (indexed) [DOE]

    Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration and Evaluation Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration and Evaluation 2011 DOE...

  14. Medium- and Heavy-Duty Electric Drive Vehicle Simulation and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Medium- and Heavy-Duty Electric Drive Vehicle Simulation and Analysis Medium- and Heavy-Duty Electric Drive Vehicle Simulation and Analysis 2011 DOE Hydrogen and Fuel Cells...

  15. Removal of carbon tetrachloride from a layered porous medium...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    carbon tetrachloride from a layered porous medium by means of soil vapor extraction enhanced by desiccation and water Removal of carbon tetrachloride from a layered porous medium...

  16. Removal of Carbon Tetrachloride from a Layered Porous Medium...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carbon Tetrachloride from a Layered Porous Medium by Means of Soil Vapor Extraction Enhanced by Desiccation and Water Removal of Carbon Tetrachloride from a Layered Porous Medium...

  17. Skewon-Axion Medium and Soft-and-Hard/DB Boundary Condition

    E-Print Network [OSTI]

    Ismo V. Lindell; Ari Sihvola

    2012-01-20T23:59:59.000Z

    The class of skewon-axion media can be defined in a simple and natural manner applying four-dimensional differential-form representation of electromagnetic fields and media. It has been recently shown that an interface of a uniaxial skewon-axion medium acts as a DB boundary requiring vanishing normal components of the D and B vectors. In the present paper a more general skewon-axion medium is considered. It is shown that a planar interface of such a medium acts as a boundary generalizing both soft-and-hard (SH) and DB boundary conditions to SHDB conditions. Reflection of a plane wave from a planar SHDB boundary is studied. It is shown that for the two eigenpolarizations the boundary can be replaced by equivalent PEC or PMC boundaries. The theory is tested with a numerical example.

  18. Demonstration Abstract: WARP A Flexible Platform for Clean-Slate Wireless Medium Access Protocol Design

    E-Print Network [OSTI]

    Knightly, Edward W.

    Demonstration Abstract: WARP ­ A Flexible Platform for Clean-Slate Wireless Medium Access Protocol University Wireless Open-Access Research Platform (WARP) provides a high performance research tool for clean-slate provides a general environment for a clean-slate MAC/PHY de- velopment unlike other platforms which rely

  19. Industrial Retrofits are Possible

    E-Print Network [OSTI]

    Stobart, E. W.

    . In April of 1987, the provincial government initiated a program to assist industrial energy users to reduce their energy usage. This program was designed to concentrate on an in-depth analysis of the complete operations of industrial plants... with the analyses being performed by specialist, private sector, engineering consultants. The program is in 3 phases providing an Ontario industrial plant with an Energy Analysis, a Feasibility Analysis Grant and a Project Engineering Design Grant...

  20. System and method for monitoring water content or other dielectric influences in a medium

    DOE Patents [OSTI]

    Cherry, Robert S. (Idaho Falls, ID); Anderson, Allen A. (Firth, ID)

    2001-01-01T23:59:59.000Z

    A sensor system is provided that measures water content or other detectable properties in a medium along the entire length of the sensor at any point in time. The sensor system includes an electromagnetic signal generator and a transmission line disposed in a medium to be monitored. Alternatively, the transmission line can be configured for movement across a medium to be monitored, or the transmission line can be fixed relative to a moving medium being monitored. A signal is transmitted along the transmission line at predetermined frequencies, and the signal is returned back along the transmission line and/or into an optional receive line in proximity to the transmission line. The returned signal is processed to generate a one-dimensional data output profile that is a function of a detectable property of the medium. The data output profile can be mapped onto a physical system to generate a two-dimensional or three-dimensional profile if desired. The sensor system is useful in a variety of different applications such as agriculture, horticulture, biofiltration systems for industrial offgases, leak detection in landfills or drum storage facilities at buried waste sites, and in many other applications.

  1. Monroe County Industrial Development Corp., New York

    E-Print Network [OSTI]

    Portman, Douglas

    Monroe County Industrial Development Corp., New York University Of Rochester; Joint Criteria: Good Operating Performance Related Criteria And Research August 11, 2011 www Of Rochester; Joint Criteria; Private Coll/Univ - General Obligation Credit Profile US$124.00 mil rev bnds

  2. Environmental Regulation and Industry Dynamics Aditi Sengupta

    E-Print Network [OSTI]

    Edwards, Paul N.

    on the dynamic struc- ture of a deterministic competitive industry with endogenous entry and exit where ...rms, pro- duction scale, investment behavior, as well as entry and exit decisions of ...rms. One signi such investments, in turn, a¤ect the entry and exit decisions of ...rms and more generally, the dynamic structure

  3. General Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall ATours,Dioxide andNationalallGeneral

  4. General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental AssessmentsGeoffrey Campbelllong version)ConfinementGeneral Tables The

  5. General Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.Newof EnergyFundingGene ControlsCounsel Law StudentGeneral

  6. Presentations for Industry

    Broader source: Energy.gov [DOE]

    Learn energy-saving strategies from leading manufacturing companies and energy experts. The presentations are organized below by topic area. In addition, industrial energy managers, utilities, and...

  7. About Industrial Distributed Energy

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office's (AMO's) Industrial Distributed Energy activities build on the success of predecessor DOE programs on distributed energy and combined heat and power (CHP) while...

  8. Industrial Demand Module

    Gasoline and Diesel Fuel Update (EIA)

    Boiler, Steam, and Cogeneration (BSC) Component. The BSC Component satisfies the steam demand from the PA and BLD Components. In some industries, the PA Component produces...

  9. In-medium properties of nucleon resonances

    E-Print Network [OSTI]

    B. Krusche

    2004-12-06T23:59:59.000Z

    Recent experimental results for the in-medium properties of nucleon resonances are discussed. The experiments were done with the TAPS detector at the tagged photon beam of the MAMI accelerator in Mainz. Measured was the photoproduction of mesons (final states $\\pi^o X$, $\\eta X$, $2\\pi^oX$ and $\\pi^o\\pi^{\\pm}X$) from the nuclei $^{12}$C, $^{40}$Ca, $^{93}$Nb, and $^{208}$Pb up to the second resonance region. The results were analyzed in view of the in-medium properties of the P$_{33}$(1232), the D$_{13}$(1520), and the S$_{11}$(1535) resonances.

  10. In-Medium Properties of Hadrons

    E-Print Network [OSTI]

    B. Krusche

    2006-08-24T23:59:59.000Z

    A diverse experimental program for the study of the photoproduction of mesons off nuclei has been carried out - and is still running - at the Mainz MAMI and Bonn ELSA electron accelerators with the TAPS, Crystal Barrel, and Crystal Ball calorimeters. It is motivated as a detailed study of the in-medium properties of hadrons and the meson - nucleus interactions. Typical examples for the in-medium behavior of vector mesons ($\\omega$), scalar mesons ($\\sigma$), and nucleon resonances (P$_{33}$(1232), S$_{11}$(1535), D$_{15}$(1520)) are discussed. Special attention is paid to meson - nucleus final state interactions.

  11. AVLIS industrial access program

    SciTech Connect (OSTI)

    Not Available

    1984-11-15T23:59:59.000Z

    This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the project in a competitive procurement situation. As a result, costs and procurement risks are both reduced because the products provided come from within the AVLIS suppliers' experience base. At the same time, suppliers can benefit by the potential to participate in AVLIS technology spin-off markets. 35 figures.

  12. 722012-13SuggestedCoursePlan INDUSTRIAL & SYSTEMS ENGINEERING

    E-Print Network [OSTI]

    Zhou, Chongwu

    . to Industrial Engineering ISE 220: Probability Concepts in Engr. ISE 225: Engineering Statistics I ISE 232L722012-13SuggestedCoursePlan INDUSTRIAL & SYSTEMS ENGINEERING FIRST YEAR FALL: 16 units SPRING: 15 and Thermodynamics PHYS 152L: Electricity and Magnetism CHEMISTRY / MATERIALS SCIENCE (4 UNITS) CHEM 105AL: General

  13. The Impact of Oil Prices on the Air Transportation Industry

    E-Print Network [OSTI]

    Hill, Wendell T.

    The Impact of Oil Prices on the Air Transportation Industry Final Report Prepared by: John Hansman................................................................................................47 3 EVALUATING THE EFFECTS OF OIL PRICE CHANGE ON THE US DOMESTIC CARGO INDUSTRY .................48 3............................................................................................................................74 4 OIL PRICE IMPACTS IN GENERAL AVIATION

  14. Growing Hawaii's agriculture industry,

    E-Print Network [OSTI]

    Program Overview Growing Hawaii's agriculture industry, one business at a time Website: http-3547 agincubator@ctahr.hawaii.edu Grow Your Business If you are looking to start an agriculture-related business with our program · Positively impact the agriculture industry in Hawaii with their success

  15. Geothermal industry assessment

    SciTech Connect (OSTI)

    Not Available

    1980-07-01T23:59:59.000Z

    An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

  16. Industrial Optimization Compact Course

    E-Print Network [OSTI]

    Kirches, Christian

    Industrial Optimization Compact Course and Challenge Workshop Optimization plays a crucial role of the processes are typically nonlinear and dyna- mic. Thus, complex dynamic optimization or optimal control in industrial optimization. February 17­20, 2014 ·9.00­17.00 IWR ·Im Neuenheimer Feld 368 ·69120 Heidelberg www

  17. Numerical simulations of the intergalactic medium

    E-Print Network [OSTI]

    Tom Theuns

    2002-09-05T23:59:59.000Z

    The intergalactic medium at redshifts 2--6 can be studied observationally through the absorption features it produces in the spectra of background quasars. Most of the UV-absorption lines arise in mildly overdense regions, which can be simulated reliably with current hydrodynamical simulations. Comparison of observed and simulated spectra allows one to put contraints on the model's parameters.

  18. Standard practice for liquid penetrant examination for general industry

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01T23:59:59.000Z

    1.1 This practice covers procedures for penetrant examination of materials. Penetrant testing is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, shrinkage, laminations, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance testing. It can be effectively used in the examination of nonporous, metallic materials, ferrous and nonferrous metals, and of nonmetallic materials such as nonporous glazed or fully densified ceramics, as well as certain nonporous plastics, and glass. 1.2 This practice also provides a reference: 1.2.1 By which a liquid penetrant examination process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications and procedures dealing with the liquid penetrant testing of parts and materials. Agreement by the customer requesting penetrant inspection is strongly ...

  19. General Assembly of the National Industrial Association (ANDI) | Department

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM Flash2011-12 OPAM RevisedFundingEnergyAPPLICATIONof Energy

  20. Shanghai Aerospace Industrial General Corporation aka Shanghai Academy of

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AGShandong Lusa New Energy Co Ltd JumpSpaceflight

  1. Antje Wittenberg, Directorate General for Enterprise and Industry, The EU

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCOSystemsProgram OverviewAdvocate -AmirAnnual Report Fiscal Year 2011ofRaw

  2. Oregon General Industrial Water Pollution Control Facilities Webpage | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:Energy Information Fees for Underground Injection ControlEnergy

  3. Uranium industry annual 1996

    SciTech Connect (OSTI)

    NONE

    1997-04-01T23:59:59.000Z

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  4. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

  5. Uranium industry annual 1995

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

  6. Kansas Consortium Plug-in Hybrid Medium Duty

    SciTech Connect (OSTI)

    None, None

    2012-03-31T23:59:59.000Z

    On September 30, 2008, the US Department of Energy (DoE), issued a cooperative agreement award, DE-FC26-08NT01914, to the Metropolitan Energy Center (MEC), for a project known as “Kansas Consortium Plug-in Hybrid Medium Duty Certification” project. The cooperative agreement was awarded pursuant to H15915 in reference to H. R. 2764 Congressionally Directed Projects. The original agreement provided funding for The Consortium to implement the established project objectives as follows: (1) to understand the current state of the development of a test protocol for PHEV configurations; (2) to work with industry stakeholders to recommend a medium duty vehicle test protocol; (3) to utilize the Phase 1 Eaton PHEV F550 Chassis or other appropriate PHEV configurations to conduct emissions testing; (4) and to make an industry PHEV certification test protocol recommendation for medium duty trucks. Subsequent amendments to the initial agreement were made, the most significant being a revised Scope of Project Objectives (SOPO) that did not address actual field data since it was not available as originally expected. This project was mated by DOE with a parallel project award given to the South Coast Air Quality Management District (SCAQMD) in California. The SCAQMD project involved designing, building and testing of five medium duty plug-in hybrid electric trucks. SCAQMD had contracted with the Electric Power Research Institute (EPRI) to manage the project. EPRI provided the required match to the federal grant funds to both the SCAQMD project and the Kansas Consortium project. The rational for linking the two projects was that the data derived from the SCAQMD project could be used to validate the protocols developed by the Kansas Consortium team. At the same time, the consortium team would be a useful resource to SCAQMD in designating their test procedures for emissions and operating parameters and determining vehicle mileage. The years between award of the cooperative agreements and their completion were problematic for the US and world economies. This resulted in the President and Congress implementing the American Recovery and Reinvestment Act of 2009, abbreviated ARRA (Pub.L. 111-5), commonly referred to as the Stimulus or The Recovery Act. The stimulus money available for transportation projects encouraged the SCAQMD to seek additional funds. In August of 2009, they eventually were awarded an additional $45.5 M, and the scope of their project was expanded to 378 vehicles. However, as a consequence of the stimulus money and the inundation of DOE with applications for new project under the ARRA, the expected time table for producing and testing vehicles was significantly delayed. As a result, these vehicles were not available for validating the protocols developed by the Kansas Consortium. Therefore, in April of 2011, the Scope of Project Objectives (SOPO) for the project was revised, and limited to producing the draft protocol for PHEV certification as its deliverable.

  7. Visco-elastic fluid simulations of coherent structures in strongly coupled dusty plasma medium

    SciTech Connect (OSTI)

    Singh Dharodi, Vikram; Kumar Tiwari, Sanat; Das, Amita, E-mail: amita@ipr.res.in [Institute for Plasma Research, Bhat, Gandhinagar 382428 (India)

    2014-07-15T23:59:59.000Z

    A generalized hydrodynamic model depicting the behaviour of visco-elastic fluids has often been invoked to explore the behaviour of a strongly coupled dusty plasma medium below their crystallization limit. The model has been successful in describing the collective normal modes of the strongly coupled dusty plasma medium observed experimentally. The paper focuses on the study of nonlinear dynamical characteristic features of this model. Specifically, the evolution of coherent vorticity patches is being investigated here within the framework of this model. A comparison with Newtonian fluids and molecular dynamics simulations treating the dust species interacting through the Yukawa potential has also been presented.

  8. Performance of an industrial type combustor burning simulated fuels of medium BTU content

    E-Print Network [OSTI]

    Goehring, Howard Lee

    1983-01-01T23:59:59.000Z

    studied fuels were those produced by coal gasification (1, 2, 3, 4, 5). Other widely studied fuels include petroleum distillates, alcohol type fuel, fuel made from tar sands, fuel made from oil shale (1), petro- chemical process plants "off-gases" (2...). Harmful emissions can be reduced by using steam injection (8, 2, 9). Also the amount of equipment needed to produce and refine fuels, such as coal gas, is large; whereas, in the case of steam, the amount of' equipment needed is relatively small. Also...

  9. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

    1998-06-09T23:59:59.000Z

    A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

  10. Department of Industrial Engineering and Management Sciences Northwestern University, Evanston, Illinois, 60208-3119, U.S.A.

    E-Print Network [OSTI]

    Hazen, Gordon

    Department of Industrial Engineering and Management Sciences Northwestern University, Evanston-Dependent Medium Irina S. Dolinskaya Department of Industrial Engineering and Management Sciences Northwestern. Current research regarding the optimal short-range routing of a vessel in a stationary random seaway

  11. Brownian motor in a granular medium

    E-Print Network [OSTI]

    Riccardo Balzan; Fergal Dalton; Vittorio Loreto; Alberto Petri; Giorgio Pontuale

    2009-09-21T23:59:59.000Z

    In this work we experimentally study the behavior of a freely-rotating asymmetric probe immersed in a vibrated granular medium. For a wide variety of vibration conditions the probe exhibits a steady rotation whose direction is constant with respect to the asymmetry. By changing the vibration amplitude and by filtering the noise in different frequency bands we show that the velocity of rotation does not depend only on the RMS acceleration $\\Gamma$, but also on the amount of energy provided to two separate frequency bands which are revealed to be important for the dynamics of the granular medium: the first band governs the transfer of energy from the grains to the probe, and the second affects the dynamics by altering the viscosity of the vibro-fluidized material.

  12. Electromagnetic Radiation and in-Medium Effects

    E-Print Network [OSTI]

    Ralf Rapp

    2005-03-14T23:59:59.000Z

    The theory of thermal photon and dilepton emission from a hot and dense hadronic gas, as well as from the Quark-Gluon Plasma, is reviewed in the context of extracting in-medium properties of the matter constituents. In phenomenological applications to ultrarelativistic heavy-ion collisions we focus on recent photon and dilepton spectra as measured by WA98 and CERES/NA45, respectively, at CERN-SPS energies.

  13. Exploring medium effects on the nuclear force

    SciTech Connect (OSTI)

    F. Sammarruca

    2004-04-18T23:59:59.000Z

    This STI product contains a description of results from theoretical studies in nuclear physics. The goal is a systematic investigation of the nuclear force in the nuclear medium. The problems addressed are: density-dependent effective interactions as seen through proton-nucleus reactions, nuclear matter with unequal densities of protons and neutrons, applications to asymmetric nuclei through predictions of neutron radii and neutron skins.

  14. Industrial Decision Making

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01T23:59:59.000Z

    Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy...

  15. AI Industrial Engineering 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    This paper describes the California Energy Commission’s (Commission) energy policies and programs that save energy and money for California’s manufacturing and food processing industries to help retain businesses in-state and reduce greenhouse gases...

  16. Uranium Industry Annual, 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-28T23:59:59.000Z

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

  17. Industrial energy use indices 

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10T23:59:59.000Z

    Energy use index (EUI) is an important measure of energy use which normalizes energy use by dividing by building area. Energy use indices and associated coefficients of variation are computed for major industry categories ...

  18. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Plant managers around the world are interested in improving the energy efficiency of their facilities while both growing and modernizing their manufacturing capabilities. Emerging industrial technologies, both at the ...

  19. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Industrial steam users recognize the need to reduce system cost in order to remain internationally competitive. Steam systems are a key utility that influence cost significantly, and represent a high value opportunity ...

  20. Utility and Industrial Partnerships

    E-Print Network [OSTI]

    Sashihara, T. F.

    In the past decade, many external forces have shocked both utilities and their large industrial customers into seeking more effective ways of coping and surviving. One such way is to develop mutually beneficial partnerships optimizing the use...

  1. Engineering Industrial & Systems

    E-Print Network [OSTI]

    Berdichevsky, Victor

    powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I the skills necessary to be successful in today's global environment. EDGE exposes and trains engineering

  2. Cosmic Minivoids in the Intergalactic Medium

    E-Print Network [OSTI]

    Avery Meiksin

    1996-11-01T23:59:59.000Z

    The Gunn-Peterson effect, absorption of Lya photons by a homogeneous component of the intergalactic medium (IGM), potentially provides a test of Big Bang Nucleosynthesis (BBN). With a lower limit on the UV radiation field estimated from the contribution due to QSOs, a measurement of the Lya opacity of the intergalactic medium would permit the derivation of a lower bound to the baryonic density of the universe. The effect, however, has continually eluded a convincing detection, both in HI and HeII, despite extensive searches. Recent cosmological hydrodynamical simulations of structure formation in the intergalactic medium suggest an explanation for its absence. In a Cold Dark Matter dominated cosmology, the fragmentation of the baryons is nearly complete, leaving a negligible remnant to comprise a smoothly distributed component. The fragmentation extends even into regions that are underdense, where it gives rise to most of the optically thin HI systems and nearly all of the HeII systems, both thin and saturated. The result is a Lya opacity from a smooth IGM that is suppressed by over two orders of magnitude from the BBN value.

  3. Analysis of ray stability and caustic formation in a layered moving fluid medium

    E-Print Network [OSTI]

    Bergman, David R

    2015-01-01T23:59:59.000Z

    Caustic formation occurs within a ray skeleton as optical or acoustic fields propagate in a medium with variable refractive properties and are unphysical, their presence being an artifact of the ray approximation of the field, and methods of correcting the field near a caustic are well known. Differential geometry provides a novel approach to calculating acoustic intensity, assessing ray stability and locating caustics in acoustic ray traces when the properties of medium are completely arbitrary by identifying points on the caustic with conjugate points along various rays. The method of geodesic deviation is applied to the problem of determining ray stability and locating caustics in 2-dimensional acoustic ray traces in a layered moving medium. Specifically, a general treatment of caustic formation in sound ducts and in piecewise continuous media is presented and applied to various idealized and realistic scenarios.

  4. Propagation of an asymmetric Gaussian beam in a nonlinear absorbing medium

    SciTech Connect (OSTI)

    Ianetz, D.; Kaganovskii, Yu.; Rosenbluh, M. [Jack and Pearl Resnick Institute for Advanced Technology, Department of Physics, Bar-Ilan University, Ramat-Gan 52900 (Israel); Wilson-Gordon, A. D. [Department of Chemistry, Bar-Ilan University, Ramat Gan 52900 (Israel)

    2010-05-15T23:59:59.000Z

    Propagation of an asymmetric Gaussian beam in a cubic-quintic absorbing medium is analyzed and compared with that of a symmetric beam in both lossless and lossy media. A 'collective variable approach' technique, based on trial functions, is used for solution of the general nonlinear Schroedinger equation. Using this variational approach, we investigate the self-focusing and breathing of an intense asymmetric Gaussian beam, taking into account both linear and nonlinear absorption. For a lossless medium, we define regions of oscillatory and diffractive beam propagation, for both symmetric and asymmetric beams. In particular, for an asymmetric beam, we find that there is no sharp boundary between the oscillatory self-focusing and oscillatory diffractive regimes of propagation. In the oscillatory region, we detect an interesting phenomenon -'beats' of the amplitude and perpendicular widths of the beam. For a lossy medium, significant differences between the amplitudes, widths, and phases of the symmetric and asymmetric beams have been predicted.

  5. Combined Cycles and Cogeneration - An Alternative for the Process Industries

    E-Print Network [OSTI]

    Harkins, H. L.

    1981-01-01T23:59:59.000Z

    this energy source. Byproduct steam is produced in the recovery of chemicals in pulp and paper industry black liquor recovery boilers. On a bulk basis consideration, a large percentage of process steam is required by the energy intensive in dustries... SYSTEM Gasification Numerous programs are underway for gasification of solid fuels and heavy oils and it is among these systems that many feel medium Btu gas will be pro duced for use in combined cycle systems. Many of the problems now facing...

  6. Clean Energy Manufacturing Initiative Industrial Efficiency and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

  7. NEMS industrial module documentation report

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  8. Industrial Development Fund (North Carolina)

    Broader source: Energy.gov [DOE]

    The Industrial Development Fund provides financing grants and loans through designated municipalities and counties to assist in infrastructure improvements for targeted industrial projects. The...

  9. Industrial Energy Efficiency: Designing Effective State Programs...

    Energy Savers [EERE]

    Industrial Energy Efficiency: Designing Effective State Programs for the Industrial Sector Industrial Energy Efficiency: Designing Effective State Programs for the Industrial...

  10. Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst

    E-Print Network [OSTI]

    Mountziaris, T. J.

    9/13/2007 Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst Department of Mechanical and Industrial Engineering About the Mechanical and Industrial Engineering Industry Advisory Board The purpose of the Mechanical and Industrial Engineering Industry Advisory

  11. Wave scattering by small particles in a medium

    E-Print Network [OSTI]

    A. G. Ramm

    2007-02-14T23:59:59.000Z

    Wave scattering is considered in a medium in which many small particles are embedded. Equations for the effective field in the medium are derived when the number of particles tends to infinity.

  12. Medium- and Heavy-Duty Electric Drive Vehicle Simulation and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Medium- and Heavy-Duty Electric Drive Vehicle Simulation and Analysis Medium- and Heavy-Duty Electric Drive Vehicle Simulation and Analysis 2012 DOE Hydrogen and Fuel Cells Program...

  13. Industrial Energy Audit Guidebook: Guidelines for Conducting an Energy Audit in Industrial Facilities

    SciTech Connect (OSTI)

    Hasanbeigi, Ali; Price, Lynn

    2010-10-07T23:59:59.000Z

    Various studies in different countries have shown that significant energy-efficiency improvement opportunities exist in the industrial sector, many of which are cost-effective. These energy-efficiency options include both cross-cutting as well as sector-specific measures. However, industrial plants are not always aware of energy-efficiency improvement potentials. Conducting an energy audit is one of the first steps in identifying these potentials. Even so, many plants do not have the capacity to conduct an effective energy audit. In some countries, government policies and programs aim to assist industry to improve competitiveness through increased energy efficiency. However, usually only limited technical and financial resources for improving energy efficiency are available, especially for small and medium-sized enterprises. Information on energy auditing and practices should, therefore, be prepared and disseminated to industrial plants. This guidebook provides guidelines for energy auditors regarding the key elements for preparing for an energy audit, conducting an inventory and measuring energy use, analyzing energy bills, benchmarking, analyzing energy use patterns, identifying energy-efficiency opportunities, conducting cost-benefit analysis, preparing energy audit reports, and undertaking post-audit activities. The purpose of this guidebook is to assist energy auditors and engineers in the plant to conduct a well-structured and effective energy audit.

  14. Technical & Biosystems Engineering, Industrial Technology, and Packaging Services Organizations Hiring Students in Technical & Biosystems Engineering, Industrial Technology, and Packaging

    E-Print Network [OSTI]

    Faurecia FCA Packaging Fischer Controls Fusion PKG Gavilon, LLC General Motors George W. Auch Geotex,000 57,000 12 Engineer, General 56,513 33,000 80,000 34 Equipment Test Technician 46,000 32,000 60,000 510 Technical & Biosystems Engineering, Industrial Technology, and Packaging Services Organizations

  15. The Enrichment of the Intracluster Medium

    E-Print Network [OSTI]

    Brad K. Gibson; Francesca Matteucci

    1996-12-13T23:59:59.000Z

    The enrichment of the intracluster medium (ICM) of galaxy clusters, within the framework of the supernovae-driven wind model for elliptical galaxies, has been considered under two extreme assumptions regarding the binding energy-mass-radius relations. Unless the binding energy at the time of wind commencement, for a given galactic mass, was a factor of approximately five lower than that predicted by the present-day relation, at most 20% of the ICM gas could have originated within the cluster ellipticals themselves, the remainder being of primordial origin.

  16. Category:MediumOffice | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:Power LPInformationCashtonGo Back to PVMagnetotelluricsMediumOffice

  17. Policies on Japan's Space Industry

    E-Print Network [OSTI]

    with space emerging countries 3. Step up leading-edge science and technology as an innovation engine (1Policies on Japan's Space Industry Shuichi Kaneko Director, Space Industry Office Manufacturing Industries Bureau Ministry of Economy, Trade and Industry (METI) #12;Japan's Space Policy is based

  18. Applications for Computers in Industrial Powerhouses

    E-Print Network [OSTI]

    Delk, S. R.

    1981-01-01T23:59:59.000Z

    of electric motors due to their increased number of starts. In the industrial field, there are many processes that will not allow a cyclical operation. However, in batch processes, electric demand control can be very valuable. Electric demand reduction... these services you generally have several boilers, refrigeration machines, and air compres sors which may be driven by electric motors, topp ing or condensing steam turbines. How do you determine the most economical method to supply all the utilities...

  19. Broadening Industry Governance to Include Nonproliferation

    SciTech Connect (OSTI)

    Hund, Gretchen; Seward, Amy M.

    2008-11-11T23:59:59.000Z

    As industry is the first line of defense in detecting and thwarting illicit trade networks, the engagement of the private sector is critical to any government effort to strengthen existing mechanisms to protect goods and services throughout the supply chain. This study builds on previous PNNL work to continue to evaluate means for greater industry engagement to complement and strengthen existing governmental efforts to detect and stem the trade of illicit goods and to protect and secure goods that could be used in making a weapon of mass destruction. Specifically, the study evaluates the concept of Industry Self Regulation, defined as a systematic voluntary program undertaken by an industry or by individual companies to anticipate, implement, supplement, or substitute for regulatory requirements in a given field, generally through the adoption of best practices. Through a series of interviews with companies with a past history of non-compliance, trade associations and NGOs, the authors identify gaps in the existing regulatory infrastructure, drivers for a self regulation approach and the form such an approach might take, as well as obstacles to be overcome. The authors conclude that it is at the intersection of industry, government, and security that—through collaborative means—the effectiveness of the international nonproliferation system—can be most effectively strengthened to the mutual benefit of both government and the private sector. Industry has a critical stake in the success of this regime, and has the potential to act as an integrating force that brings together the existing mechanisms of the global nonproliferation regime: export controls, physical protection, and safeguards. The authors conclude that industry compliance is not enough; rather, nonproliferation must become a central tenant of a company’s corporate culture and be viewed as an integral component of corporate social responsibility (CSR).

  20. Attorney-Adviser (General)

    Broader source: Energy.gov [DOE]

    The Assistant General Counsel for General Law is responsible for providing legal review and general legal services to DOE with regard to matters involving: fiscal, personnel, labor relations,...

  1. Emulsified industrial oils recycling

    SciTech Connect (OSTI)

    Gabris, T.

    1982-04-01T23:59:59.000Z

    The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

  2. Libyan oil industry

    SciTech Connect (OSTI)

    Waddams, F.C.

    1980-01-01T23:59:59.000Z

    Three aspects of the growth and progress of Libya's oil industry since the first crude oil discovery in 1961 are: (1) relations between the Libyan government and the concessionary oil companies; (2) the impact of Libyan oil and events in Libya on the petroleum markets of Europe and the world; and (3) the response of the Libyan economy to the development of its oil industry. The historical review begins with Libya's becoming a sovereign nation in 1951 and traces its subsequent development into a position as a leading world oil producer. 54 references, 10 figures, 55 tables.

  3. Solar industrial process heat

    SciTech Connect (OSTI)

    Lumsdaine, E.

    1981-04-01T23:59:59.000Z

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  4. Industrial Equipment Impacts Infrastructure

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf05 IdentifiedPathways to SustainedIndustrial AssessmentIndustrial

  5. A Priori Estimates and Regularization for a Class of Porous Medium Equations 1

    E-Print Network [OSTI]

    Sharpley, Robert

    and Robert C. Sharpley Abstract The general class of porous medium equations: @S @t +r \\Delta f(S)u \\Gamma r of saturation problems arise: @S @t +r \\Delta (f(S)u) \\Gamma r \\Delta (k(S)rS) = Q(S) on\\Omega \\Theta (0; T 0 ] (1:1a) with boundary conditions: (f(S)u \\Gamma k(S)rS) \\Delta n = q on @\\Omega \\Theta [0; T 0 ] (1:1b

  6. Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

    SciTech Connect (OSTI)

    Azimi, S.A.; Conrad, J.L.; Reed, J.E.

    1985-03-01T23:59:59.000Z

    Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

  7. Industry Partners Panel

    Broader source: Energy.gov [DOE]

    Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

  8. Energy efficiency in the US economy technical report four: Analysis of energy-efficiency investment decisions by small and medium-sized manufacturers

    SciTech Connect (OSTI)

    NONE

    1996-03-01T23:59:59.000Z

    This report highlights the results of a comprehensive analysis of investment decisions regarding energy-efficiency measures at small and medium-sized manufacturing plants. The analysis is based primarily on the experiences of companies participating in the US Department of Energy`s Industrial Assessment Center (IAC) program.

  9. Propagation of sound waves through a spatially homogeneous but smoothly time-dependent medium

    SciTech Connect (OSTI)

    Hayrapetyan, A.G., E-mail: armen@physi.uni-heidelberg.de [Physikalisches Institut, Ruprecht-Karls-Universität Heidelberg, D-69120 Heidelberg (Germany); Max-Planck-Institut für Kernphysik, Saupfercheckweg 1, D-69117 Heidelberg (Germany); Grigoryan, K.K.; Petrosyan, R.G. [Yerevan State University, 1 Alex Manoogian Str., 0025 Yerevan (Armenia)] [Yerevan State University, 1 Alex Manoogian Str., 0025 Yerevan (Armenia); Fritzsche, S. [Helmholtz-Institut Jena, Fröbelstieg 3, D-07743 Jena (Germany) [Helmholtz-Institut Jena, Fröbelstieg 3, D-07743 Jena (Germany); Theoretisch-Physikalisches Institut, Friedrich-Schiller-Universität Jena, Max-Wien-Platz 1, D-07743 Jena (Germany)

    2013-06-15T23:59:59.000Z

    The propagation of sound through a spatially homogeneous but non-stationary medium is investigated within the framework of fluid dynamics. For a non-vortical fluid, especially, a generalized wave equation is derived for the (scalar) potential of the fluid velocity distribution in dependence of the equilibrium mass density of the fluid and the sound wave velocity. A solution of this equation for a finite transition period ? is determined in terms of the hypergeometric function for a phenomenologically realistic, sigmoidal change of the mass density and sound wave velocity. Using this solution, it is shown that the energy flux of the sound wave is not conserved but increases always for the propagation through a non-stationary medium, independent of whether the equilibrium mass density is increased or decreased. It is found, moreover, that this amplification of the transmitted wave arises from an energy exchange with the medium and that its flux is equal to the (total) flux of the incident and the reflected wave. An interpretation of the reflected wave as a propagation of sound backward in time is given in close analogy to Feynman and Stueckelberg for the propagation of anti-particles. The reflection and transmission coefficients of sound propagating through a non-stationary medium is analyzed in more detail for hypersonic waves with transition periods ? between 15 and 200 ps as well as the transformation of infrasound waves in non-stationary oceans. -- Highlights: •Analytically exact study of sound propagation through a non-stationary medium. •Energy exchange between the non-stationary medium and the sound wave. •Transformation of hypersonic and ultrasound frequencies in non-stationary media. •Propagation of sound backward in time in close analogy to anti-particles. •Prediction of tsunamis both in spatially and temporally inhomogeneous oceans.

  10. Erosion dynamics of a wet granular medium

    E-Print Network [OSTI]

    Gautier Lefebvre; Pierre Jop

    2014-12-08T23:59:59.000Z

    Liquid may give strong cohesion properties to a granular medium, and confer a solid-like behavior. We study the erosion of a fixed circular aggregate of wet granular matter subjected to a flow of dry grains inside a half-filled rotating drum. During the rotation, the dry grains flow around the fixed obstacle. We show that its diameter decreases linearly with time for low liquid content, as wet grains are pulled-out of the aggregate. This erosion phenomenon is governed by the properties of the liquids. The erosion rate decreases exponentially with the surface tension while it depends on the viscosity to the power -1. We propose a model based on the force fluctuations arising inside the flow, explaining both dependencies: the capillary force acts as a threshold and the viscosity controls the erosion time scale. We also provide experiments using different flowing grains confirming our model.

  11. Double hadron leptoproduction in the nuclear medium

    E-Print Network [OSTI]

    Airapetian, A; Akopov, Z; Amarian, M; Andrus, A; Aschenauer, E C; Augustyniak, W; Avakian, R; Avetisian, A; Avetissian, E; Bailey, P; Belostotskii, S; Bianchi, N; Blok, H P; Böttcher, Helmut B; Borisov, A; Borysenko, A; Brüll, A; Bryzgalov, V; Capiluppi, M; Capitani, G P; Ciullo, G; Contalbrigo, M; Dalpiaz, P F; Deconinck, W; De Leo, R; Demey, M; De Nardo, L; De Sanctis, E; Devitsin, E G; Diefenthaler, M; Di Nezza, P; Dreschler, J; Düren, M; Ehrenfried, M; Elalaoui-Moulay, A; Elbakian, G; Ellinghaus, F; Elschenbroich, U; Fabbri, R; Fantoni, A; Felawka, L; Frullani, S; Funel, A; Gapienko, G; Gapienko, V; Garibaldi, F; Garrow, K; Gavrilov, G; Karibian, V; Giordano, F; Grebenyuk, O; Gregor, I M; Griffioen, K; Guler, H; Hadjidakis, C; Hartig, M; Hasch, D; Hasegawa, T; Hesselink, W H A; Hillenbrand, A; Hoek, M; Holler, Y; Hommez, B; Hristova, I; Iarygin, G; Ivanilov, A; Izotov, A; Jackson, H E; Jgoun, A; Kaiser, R; Keri, T; Kinney, E; Kiselev, A; Kobayashi, T; Kopytin, M; Korotkov, V; Kozlov, V; Krauss, B; Kravchenko, P; Krivokhizhin, V G; Lagamba, L; Lapikas, L; Lenisa, P; Liebing, P; Linden-Levy, L A; Lorenzon, W; Lü, J; Lu, S; Ma, B Q; Maiheu, B; Makins, N C R; Mao, Y; Marianski, B; Marukyan, H; Masoli, F; Mexner, V; Meyners, N; Michler, T; Miklukho, O; Miller, C A; Miyachi, Y; Muccifora, V; Murray, M; Nagaitsev, A; Nappi, E; Naryshkin, Yu; Negodaev, M; Nowak, Wolf-Dieter; Ohsuga, H; Osborne, A; Perez-Benito, R; Pickert, N; Raithel, M; Reggiani, D; Reimer, P E; Reischl, A; Reolon, A R; Riedl, C; Rith, K; Rosner, G; Rostomyan, A; Rubacek, L; Rubin, J; Ryckbosch, D; Salomatin, Y; Sanjiev, I; Savin, I; Schäfer, A; Schnell, G; Schüler, K P; Seele, J; Seidl, R; Seitz, B; Shearer, C; Shibata, T A; Shutov, V; Sinram, K; Stancari, M; Statera, M; Steffens, E; Steijger, J J M; Stenzel, H; Stewart, J; Stinzing, F; Streit, J; Tait, P; Tanaka, H; Taroian, S P; Tchuiko, B; Terkulov, A R; Trzcinski, A; Tytgat, M; Vandenbroucke, A; Van der Nat, P B; van der Steenhoven, G; Van Haarlem, Y; Veretennikov, D; Vikhrov, V; Vogel, C; Wang, S; Ye, Y; Ye, Z; Yen, S; Zihlmann, B; Zupranski, P

    2006-01-01T23:59:59.000Z

    First measurement of double-hadron production in deep-inelastic scattering has been measured with the HERMES spectrometer at HERA using a 27.6 GeV positron beam with deuterium, nitrogen, krypton and xenon targets. The influence of the nuclear medium on the ratio of double-hadron to single-hadron yields has been investigated. Nuclear effects are clearly observed but with substantially smaller magnitude and reduced $A$-dependence compared to previously measured single-hadron multiplicity ratios. The data are in fair agreement with models based on partonic or pre-hadronic energy loss, while they seem to rule out a pure absorptive treatment of the final state interactions. Thus, the double-hadron ratio provides an additional tool for studying modifications of hadronization in nuclear matter.

  12. Potential environmental effects of energy conservation measures in northwest industries

    SciTech Connect (OSTI)

    Baechler, M C; Gygi, K F; Hendrickson, P L

    1992-01-01T23:59:59.000Z

    The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

  13. Transforming the Oil Industry into the Energy Industry

    E-Print Network [OSTI]

    Sperling, Daniel; Yeh, Sonia

    2009-01-01T23:59:59.000Z

    Transforming the Oil Industry into the Energy Industry BYculprit. It consumes half the oil used in the world andconsuming two thirds of the oil and causing about one third

  14. Innovative New Industrial Technologies: An Industry/DOE Joint Endeavor

    E-Print Network [OSTI]

    Gross, T. J.

    The Department of Energy’s Office of Industrial Programs supports research and development leading to improved energy efficiency and greater overall productivity in the industrial sector. Its basic strategy is a program of cost-shared R...

  15. INDUSTRIAL ASSOCIATESHIP SCHEME Centre for Industrial Consultancy and Sponsored Research

    E-Print Network [OSTI]

    Bhashyam, Srikrishna

    this scheme: #12;(i) Energy Energy Storage (1990) Strategies for Energy Saving in Industry (1993) Pollution Control Equipment (2001) Acoustics and Noise Control for Industry (2005) Urban Air Quality

  16. Comprehensive Compressor Calorimeter Testing of Lower-GWP Alternative Refrigerants for Heat Pump and Medium Temperature Refrigeration Applications

    SciTech Connect (OSTI)

    Shrestha, Som S [ORNL] [ORNL; Sharma, Vishaldeep [ORNL] [ORNL; Abdelaziz, Omar [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    In response to environmental concerns raised by the use of refrigerants with high Global Warming Potential (GWP), the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) has launched an industry-wide cooperative research program, referred to as the Low-GWP Alternative Refrigerants Evaluation Program (AREP), to identify and evaluate promising alternative refrigerants for major product categories. This paper reports one of the Oak Ridge National Laboratory (ORNL) contributions to AREP. It compares performance of alternative refrigerants to that of R-410A and R-404A for heat pump and medium temperature applications, respectively. The alternatives reported in this paper are: R-32, DR-5, and L-41a for R-410A and ARM-31a, D2Y-65, L-40, and a mixture of R-32 and R-134a for R-404A. All performance comparison tests were conducted using scroll compressors of ~1.85 tons (6.5 kW) cooling capacity. Tests were conducted over a range of combinations of saturation suction and saturation discharge temperatures for both compressors. The tests showed that, in general, energy efficiency ratio (EER) and cooling capacity of R-410A alternative refrigerants were slightly lower than that of the baseline refrigerant with a moderate increases in discharge temperature. On the other hand, R-404A alternative refrigerants showed relative performance dependence on saturation suction and saturation discharge temperatures and larger increases in discharge temperature than for the R-410A alternatives. This paper summarizes the relative performance of all alternative refrigerants compared to their respective baseline.

  17. INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles of physical and human resources. These engineers are involved in developing manufacturing systems to help companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited

  18. BTU Accounting for Industry

    E-Print Network [OSTI]

    Redd, R. O.

    1979-01-01T23:59:59.000Z

    , salesmen cars, over the highway trucks, facilities startup, waste used as fuel and fuels received for storage. This is a first step in the DOE's effort to establish usage guidelines for large industrial users and, we note, it requires BTU usage data...-generated electricity, heating, ventilating, air conditioning, in-plant transportation, ore hauling, raw material storage and finished product warehousing. Categories which are excluded are corporate and divisional offices, basic research, distribution centers...

  19. Industrial Waste Heat Recovery

    E-Print Network [OSTI]

    Ward, M. E.; Solomon, N. G.; Tabb, E. S.

    1980-01-01T23:59:59.000Z

    INDUSTRIAL WASTE HEAT RECOVREY M. E. Ward and N. G. Solomon E. S. Tabb Solar Turbines International and Gas Research Institute San Diego, California Chicago, Illinois ABSTRACT i I One hundred fifty reports were reviewed along with interviews... tests, promising low temperature heat exchanger tube alloys and coated surfaces were identified. 1INTROUCTION of advanced technology heat recovery techniques 1_ Recovering waste heat from the flue gases of the pr~ary objective. Specific objectives...

  20. Industrial Energy Efficiency Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to Industrial

  1. The impact of government policies on industrial evolution : the case of China's automotive industry

    E-Print Network [OSTI]

    Luo, Jianxi

    2006-01-01T23:59:59.000Z

    Governmental industrial policies have great influence on industrial performances and development trajectories. The infant industry theory has been the dominating theoretical foundation of the industrial policies in developing ...

  2. Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings

    SciTech Connect (OSTI)

    Page, Janie; Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann; Chiu, Albert K.; Kellow, Bashar; Koch, Ed; Lipkin, Paul

    2011-07-01T23:59:59.000Z

    Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.

  3. Transport activity dependent regulation of the yeast general amino acid permease

    E-Print Network [OSTI]

    Cain, Natalie E. (Natalie Elaine)

    2011-01-01T23:59:59.000Z

    The general amino acid permease Gap1p of Saccharomyces cerevisiae scavenges amino acids from the extracellular medium for use as nitrogen sources in starvation conditions. Because unlimited uptake of both naturally occurring ...

  4. Industrial Heat Pump Design Options

    E-Print Network [OSTI]

    Gilbert, J. S.

    There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

  5. Industrial Heat Pump Design Options 

    E-Print Network [OSTI]

    Gilbert, J. S.

    1985-01-01T23:59:59.000Z

    There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

  6. A National Resource for Industry

    E-Print Network [OSTI]

    alloys, and metal matrix composite products carbon fibe's manufacturing industries. These industries call upon ORNL's expertise in materials synthesis, characterization-efficient manufacturing processes and materials targeting products of the future. The Department of Energy's first

  7. Electrotechnologies and Industrial Pollution Control

    E-Print Network [OSTI]

    Schmidt, P. S.

    The role of electrotechnologies in the control of emissions and effluents from industrial processes is discussed. Matrices are presented identifying those electrotechnologies which impact pollution in various industries. Specific examples...

  8. Deaerators in Industrial Steam Systems

    SciTech Connect (OSTI)

    Not Available

    2006-01-01T23:59:59.000Z

    This revised ITP tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  9. Modeling the semiconductor industry dynamics

    E-Print Network [OSTI]

    Wu, Kailiang

    2008-01-01T23:59:59.000Z

    The semiconductor industry is an exciting and challenging industry. Strong demand at the application end, plus the high capital intensity and rapid technological innovation in manufacturing, makes it difficult to manage ...

  10. Texas Industries of the Future

    E-Print Network [OSTI]

    Ferland, K.

    The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs...

  11. Fracking: An Industry Under Pressure

    E-Print Network [OSTI]

    Melville, Jo

    2013-01-01T23:59:59.000Z

    is able to squeeze out of oil and gas wells, it is a hugehugely to the local oil and gas industries, household incomeMore importantly, the oil and gas industry -- mostly through

  12. Innovative Utility Pricing for Industry

    E-Print Network [OSTI]

    Ross, J. A.

    tariffs can re a market for power during the time when it has sult in benefits to industry, to the electric abundant capacity available. From the other rate utility, and to other ratepayers on the electric payers' perspective, there will be a continued...INNOVATIVE UTILITY PRICING FOR INDUSTRY James A. Ross Drazen-Brubaker &Associates, Inc. St. Louis, Missouri ABSTRACT The electric utility industry represents only one source of power available to industry. Al though the monopolistic...

  13. Submerged Medium Voltage Cable Systems at Nuclear Power Plants...

    Office of Scientific and Technical Information (OSTI)

    Submerged Medium Voltage Cable Systems at Nuclear Power Plants: A Review of Research Efforts Relevant to Aging Mechanisms and Condition Monitoring. Re-direct Destination: In a...

  14. Vehicle Technologies Office Issues Notice of Intent for Medium...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vehicle Technologies Office Issues Notice of Intent for Medium and Heavy-Duty Vehicle Demonstration Funding Opportunity Vehicle Technologies Office Issues Notice of Intent for...

  15. Statistical Characterization of Medium-Duty Electric Vehicle...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    new EVs. Within the medium- and heavy-duty commercial vehicle segment, both the Smith Electric Newton and Navistar eStar vehicles qualified for such funding opportunities....

  16. Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    arravt068vssmiyasato2011o .pdf More Documents & Publications SCAQMD:Plug-In Hybrid Electric Medium-Duty Commercial Fleet Demonstration and Evaluation Plug-In Hybrid...

  17. acid medium application: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    University - TxSpace Summary: substrate and their catalytic function takes place in acid medium. This harsh environment causes an undesired reaction, which is the dissolution of...

  18. acid aqueous medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    transfer radical polymerization technique ... Yao, Jia 3 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  19. air dense medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and X-ray afterglows. Explanations of this behavior include models invoking a dense medium environment which makes the shock wave evolve quickly into the sub-relativistic...

  20. acidic aqueous medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    transfer radical polymerization technique ... Yao, Jia 3 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  1. adaptive medium access: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cost reduction of wireless technologies, ITS is finding favour, transport efficiency and environment concerns. However, the vehicular network applications require a medium...

  2. Industrial Energy Audit Guidebook: Guidelines for Conducting...

    Open Energy Info (EERE)

    Industry Resource Type: Guidemanual Website: china.lbl.govsiteschina.lbl.govfilesLBNL-3991E.Industrial%20Energy Industrial Energy Audit Guidebook: Guidelines for Conducting...

  3. Local Option- Industrial Facilities and Development Bonds

    Broader source: Energy.gov [DOE]

    Under the Utah Industrial Facilities and Development Act, counties, municipalities, and state universities in Utah may issue Industrial Revenue Bonds (IRBs) or Industrial Development Bonds (IDBs)...

  4. Federal Utility Partnership Working Group Industry Commitment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Commitment Federal Utility Partnership Working Group Industry Commitment Investor-owned electric utility industry members of the Edison Electric Institute pledge to assist...

  5. Light Vector Mesons in the Nuclear Medium

    E-Print Network [OSTI]

    M. H. Wood; R. Nasseripour; D. P. Weygand; C. Djalali; C. Tur; U. Mosel; P. Muehlich; CLAS Collaboration

    2008-03-04T23:59:59.000Z

    The light vector mesons ($\\rho$, $\\omega$, and $\\phi$) were produced in deuterium, carbon, titanium, and iron targets in a search for possible in-medium modifications to the properties of the $\\rho$ meson at normal nuclear densities and zero temperature. The vector mesons were detected with the CEBAF Large Acceptance Spectrometer (CLAS) via their decays to $e^{+}e^{-}$. The rare leptonic decay was chosen to reduce final-state interactions. A combinatorial background was subtracted from the invariant mass spectra using a well-established event-mixing technique. The $\\rho$ meson mass spectrum was extracted after the $\\omega$ and $\\phi$ signals were removed in a nearly model-independent way. Comparisons were made between the $\\rho$ mass spectra from the heavy targets ($A > 2$) with the mass spectrum extracted from the deuterium target. With respect to the $\\rho$-meson mass, we obtain a small shift compatible with zero. Also, we measure widths consistent with standard nuclear many-body effects such as collisional broadening and Fermi motion.

  6. The reemergence of medium scale gasifications technology

    SciTech Connect (OSTI)

    Reindl, W.J.

    1982-06-01T23:59:59.000Z

    Gasification of solid material is a well proven field, but the introduction of abundant and cheap petroleum fuels after WW II caused the technology to be neglected. There are three types of reactors: the fixed fuel bed, the fluidized bed, and the entrained fuel reactor. The advantages, but more to the point, the drawbacks of each system are reviewed. In order for gasification to fill modern industrial needs the advantages of the three types must be combined without their drawbacks. A reactor needs to be tar-free, have a high volume gas output relative to reactor size, accept a wide range of fuels, and have a comparable Btu production level of fuel gas. These specifications are met by the Series 8000 gas generator manufactured by Enerdyne Corporation.

  7. Industrial opportunities on the International Thermonuclear Experimental Reactor (ITER) project

    SciTech Connect (OSTI)

    Ellis, W.R. [Raytheon Engineers and Constructors, New York, NY (United States)

    1996-12-01T23:59:59.000Z

    Industry has been a long-term contributor to the magnetic fusion program, playing a variety of important roles over the years. Manufacturing firms, engineering-construction companies, and the electric utility industry should all be regarded as legitimate stakeholders in the fusion energy program. In a program focused primarily on energy production, industry`s future roles should follow in a natural way, leading to the commercialization of the technology. In a program focused primarily on science and technology, industry`s roles, in the near term, should be, in addition to operating existing research facilities, largely devoted to providing industrial support to the International Thermonuclear Experimental Reactor (ITER) Project. Industrial opportunities on the ITER Project will be guided by the amount of funding available to magnetic fusion generally, since ITER is funded as a component of that program. The ITER Project can conveniently be discussed in terms of its phases, namely, the present Engineering Design Activities (EDA) phase, and the future (as yet not approved) construction phase. 2 refs., 3 tabs.

  8. Industrial Cogeneration Application

    E-Print Network [OSTI]

    Mozzo, M. A.

    INDUSTRIAL COGENERATION APLLICATION Martin A. Mozzo, Jr., P.E. American Standard, Inc. New York,New York ABSTRACT Cogeneration is the sequential use of a single fuel source to generate electrical and thermal energy. It is not a new technology... been reviewing the potential of cogeneration at some of our key facilities. Our plan is to begin with a Pilot Plant 500 KW steam turbine generator to be install~d and operating in 1986. Key points to be discuss~d in the paper are: 1...

  9. Industrial energy use indices

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10T23:59:59.000Z

    and colder are determined by annual average temperature weather data). Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used in the south of the U.S. iv... the average EUI for an energy type. The combined CoV from all of the industries considered, which accounts for 8,200 plants from all areas of the continental U.S., is 290%. This paper discusses EUIs and their variations based on electricity and natural...

  10. Natural Gas Industrial Price

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14 Dec-14 Jan-15LiquidBG 0 20Year Jan Feb2009 20103 5.53

  11. Industrial Green | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook link to04948Industrial Green

  12. CASL - Industry Council

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteandscience, and8 FY0Link to Resources Industry

  13. CASL - Industry Council Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteandscience, and8 FY0Link to Resources IndustryCASL

  14. Industrial Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to Industrial Energy

  15. Industrial Energy Efficiency Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRYBarriers to IndustrialEnergy

  16. Model for Synchrotron Emission from Shell Supernova Remnants in Nonuniform Interstellar Medium and Nonuniform Magnetic Field

    E-Print Network [OSTI]

    O. Petruk

    2002-06-27T23:59:59.000Z

    Possibility to model the high energy synchrotron emission (in X- and gamma-rays) from supernova remnants is an important task for modern astronomy and astrophysics, because it may be responsible for the nonthermal X-rays and TeV gamma-rays observed recently from a number of SNRs. This emission allows as to look in the processes of particle acceleration on SNR shocks and generation of cosmic rays. In this paper, a model for the synchrotron emission from shell SNR in nonuniform interstellar medium and nonuniform magnetic field is presented. This model is a generalization of the model of Reynolds and Chevalier developed for a spherical SNR in the uniform medium and uniform magnetic field. The model will be used for studies on the thermal and nonthermal X-ray images and spectra from nonspherical SNRs in different interstellar magnetic field configurations.

  17. Edgar Nett Mobile Computer Communication SS'14 1 General Overview

    E-Print Network [OSTI]

    Edgar Nett Mobile Computer Communication SS'14 1 General Overview Wireless Transmission Medium Layer Mobile Transport Layer WLAN Security #12;Edgar Nett Mobile Computer Communication SS'14 2 Wireless LANs #12;Edgar Nett Mobile Computer Communication SS'14 3 Characteristics of Wireless LANs Advantages

  18. Scale effects on velocity dispersion: From ray to effective medium theories in stratified media

    SciTech Connect (OSTI)

    Marion, D. (Elf Aquitaine, Pau (France)); Mukerji, T.; Mavko, G. (Stanford Univ., CA (United States). Rockphysics Lab.)

    1994-10-01T23:59:59.000Z

    Wave propagation in stratified media may be explained by ray theory, effective medium theory, or scattering theory depending on the scales of wavelength and layer spacing. To effectively integrate and use seismic data ate different frequencies and widely varying scales, it is essential to understand the domain of applicability of long and short wavelength behavior and the transition between them. A joint experimental and theoretical study was conducted to investigate velocity behavior at the transition from ray theory to effective medium theory in stratified media. Velocity measurements were performed at 50 and 500 kHz on periodic media composed of steel and plastic discs. The ratio of wavelength to layer spacing, [lambda]/d, spanned more than two orders of magnitude between 0.1 and 50, and the volume fraction of steel ranged from 9 to 89 percent by volume. The results confirm that velocities in stratified media depend on composition and are controlled by the ratio of wavelength to layer spacing. Velocities in the short wavelength limit are generally faster than velocities in the long wavelength limit. The authors find that transition from ray to effective medium approximations occurs over a narrow range of [lambda]/d at a value of approximately 10. The amount of velocity change increases with impedance contrast, but the value of [lambda]/d at the transition is generally independent of the composition of the stratified medium. The numerically simulated waveforms are in close agreement with the experimentally observed delayed first arrival in the long wavelength limit and with the reduced amplitudes at the transition from short to long wavelength regime.

  19. BUSINESS CONTINUITY PLANNING RESOURCES FOR SMALL-AND MEDIUM-

    E-Print Network [OSTI]

    BUSINESS CONTINUITY PLANNING RESOURCES FOR SMALL- AND MEDIUM- SIZED BUSINESSES May 2010 Prepared and supported by the Northwest Regional Technology Center for Homeland Security Business Continuity Planning Resources for Small- and Medium- Sized Businesses KS Judd AM Lesperance May 14, 2010 #12;DISCLAIMER

  20. Optical quantum swapping in a coherent atomic medium

    E-Print Network [OSTI]

    Aurelien Dantan

    2011-10-03T23:59:59.000Z

    We propose to realize a passive optical quantum swapping device which allows for the exchange of the quantum fluctuations of two bright optical fields interacting with a coherent atomic medium in an optical cavity. The device is based on a quantum interference process between the fields within the cavity bandwidth arising from coherent population trapping in the atomic medium.

  1. Ray Theory for a Locally Layered Random Medium G. Papanicolaou

    E-Print Network [OSTI]

    Papanicolaou, George C.

    variations in the medium parameters. The pulse is generated by a point source and the medium is modeled the source and the point of observation. The ray is determined by high frequency asymptotics (geometrical is motivated by wave propagation in sedimentary rock. Here the sedimentary cycles produce structures

  2. Invariant measures for a stochastic porous medium equation

    E-Print Network [OSTI]

    Röckner, Michael

    Invariant measures for a stochastic porous medium equation Giuseppe Da Prato (Scuola Normale AMS :76S05,35J25, 37L40 . 1 Introduction The porous medium equation X t = (Xm ), m N, (1 Brownian motion in H and C is a positive definite bounded operator on H of trace class. To be more concrete

  3. Theory of Neutron Noise in a Temporally Fluctuating Multiplying Medium

    E-Print Network [OSTI]

    Pázsit, Imre

    Theory of Neutron Noise in a Temporally Fluctuating Multiplying Medium Lénárd Pál KFKI Atomic, respec- tively. In this paper we develop a theory of neutron fluctuations in a medium randomly varying place in a time-varying environment. I. INTRODUCTION The theory of neutron fluctuations in multiplying

  4. AN ANALYSIS FOR A FORMULATION OF THE POROUS MEDIUM EQUATION

    E-Print Network [OSTI]

    Fadimba, Koffi B.

    a porous medium, with S the saturation of the invading fluid. In this model, one assumption (the wet phase and the dry phase) occupying entirely the pores of the medium, e.g. water and oil, so , we make the assumption that n = 0, (1..4) where n is the outward unit normal vector to the boundary

  5. Waste Heat Recovery Using a Circulating Heat Medium Loop

    E-Print Network [OSTI]

    Manning, E., Jr.

    1981-01-01T23:59:59.000Z

    by a circulating heat medium loop where waste heat is recovered for useful purposes. The heat medium chosen is turbine fuel. It is pumped around the refinery to pick up heat at the crude distilling unit, the hydrocracker, the catalytic cracker...

  6. Energy-Efficiency Improvement Opportunities for the Textile Industry

    SciTech Connect (OSTI)

    China Energy Group; Hasanbeigi, Ali

    2010-09-29T23:59:59.000Z

    The textile industry is one of the most complicated manufacturing industries because it is a fragmented and heterogeneous sector dominated by small and medium enterprises (SMEs). Energy is one of the main cost factors in the textile industry. Especially in times of high energy price volatility, improving energy efficiency should be a primary concern for textile plants. There are various energy-efficiency opportunities that exist in every textile plant, many of which are cost-effective. However, even cost-effective options often are not implemented in textile plants mostly because of limited information on how to implement energy-efficiency measures, especially given the fact that a majority of textile plants are categorized as SMEs and hence they have limited resources to acquire this information. Know-how on energy-efficiency technologies and practices should, therefore, be prepared and disseminated to textile plants. This guidebook provides information on energy-efficiency technologies and measures applicable to the textile industry. The guidebook includes case studies from textile plants around the world and includes energy savings and cost information when available. First, the guidebook gives a brief overview of the textile industry around the world, with an explanation of major textile processes. An analysis of the type and the share of energy used in different textile processes is also included in the guidebook. Subsequently, energy-efficiency improvement opportunities available within some of the major textile sub-sectors are given with a brief explanation of each measure. The conclusion includes a short section dedicated to highlighting a few emerging technologies in the textile industry as well as the potential for the use of renewable energy in the textile industry.

  7. Whitacre College of Engineering Industrial Engineering Department

    E-Print Network [OSTI]

    Gelfond, Michael

    Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

  8. Faculty of Engineering & Design Industrial Placements

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Faculty of Engineering & Design Industrial Placements A guide for industry #12;Industrial placements The Faculty of Engineering & Design has built close links with engineering companies through research, projects, placements and graduate employees. We know that working with industry ensures our

  9. Competitive developments in the electric supply industry

    SciTech Connect (OSTI)

    Bruder, G.F.; Lively, M.

    1996-12-31T23:59:59.000Z

    Competition in the electric supply industry is outlined. The following topics are discussed: six impending major developments in the electric industry; recent and projected developments in the industry; where is the industry headed?; and what the future holds.

  10. Research Projects in Industrial Technology.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration. Industrial Technology Section.

    1990-06-01T23:59:59.000Z

    The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the industrial sector, as well as other sectors, in its 1986 Power Plan. Specifically, the Council recommended that BPA operate a research and development program in conjunction with industry to determine the potential costs and savings from efficiency improvements in industrial processes which apply to a wide array of industrial firms.'' The section, composed of multidisciplinary engineers, provides technical support to the Industrial Programs Branch by designing and carrying out research relating to energy conservation in the industrial sector. The projects contained in this booklet are arranged by sector --industrial, utility, and agricultural -- and, within each sector, chronologically from ongoing to completed, with those projects completed most recently falling first. For each project the following information is given: its objective approach, key findings, cost, and contact person. Completed projects also include the date of completion, a report title, and report number.

  11. Biomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial | Mechanical | Petroleum Careers in Industrial Engineering

    E-Print Network [OSTI]

    Glowinski, Roland

    | Mechanical | Petroleum Careers in Industrial Engineering Manufacturing, service and retail industries hireBiomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial a significant number of industrial engineers. Specific industries include automobile manufacturers, electronics

  12. The Industrialization of Thermoelectric Power Generation Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Industrialization of Thermoelectric Power Generation Technology The Industrialization of Thermoelectric Power Generation Technology Presents module and system requirements for...

  13. ITP Industrial Materials: Development and Commercialization of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Materials: Development and Commercialization of Alternative Carbon Fiber Precursors and Conversion Technologies ITP Industrial Materials: Development and...

  14. SPIDERS Joint Capability Technology Demonstration Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SPIDERS Joint Capability Technology Demonstration Industry Day Presentations SPIDERS Joint Capability Technology Demonstration Industry Day Presentations Presentations from the...

  15. Office of Industry Research and Technology Programs Greetings to Industry

    E-Print Network [OSTI]

    Ginzel, Matthew

    Assistant Vice President, Corporate & Foundation Relations Inside this issue... Greetings to Industry. The founding members are American Axle and Manufacturing, Eaton Corpora- tion and John Deere. This applied

  16. Potential industrial applications for composite phase-change materials as thermal energy storage media

    SciTech Connect (OSTI)

    Spanner, G.E.; Wilfert, G.L.

    1989-07-01T23:59:59.000Z

    Considerable effort has been spent by the US Department of Energy and its contractors over the last few years to develop composite phase-change materials (CPCMs) for thermal energy storage (TES). This patented TES medium consists of a phase-change material (typically a salt or metal alloy) that is retained within the porous structure of a supporting material (typically a ceramic). The objectives of this study were to (1) introduce CPCMs to industries that may not otherwise be aware of them, (2) identify potentially attractive applications for CPCM in industry, (3) determine technical requirements that will affect the design of CPCM's for specific applications, and (4) generate interest among industrial firms for employing CPCM TES in their processes. The approach in this study was to examine a wide variety of industries using a series of screens to select those industries that would be most likely to adopt CPCM TES in their processes. The screens used in this study were process temperature, presence of time-varying energy flows, energy intensity of the industry, and economic growth prospects over the next 5 years. After identifying industries that passed all of the screens, representatives of each industry were interviewed by telephone to introduce them to CPCM TES, assess technical requirements for CPCM TES in their industry, and determine their interest in pursuing applications for CPCM TES. 11 refs., 4 tabs.

  17. The US petroleum refining industry in the 1980's

    SciTech Connect (OSTI)

    Not Available

    1990-10-11T23:59:59.000Z

    As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.

  18. Gas Turbines Increase the Energy Efficiency of Industrial Processes

    E-Print Network [OSTI]

    Banchik, I. N.; Bohannan, W. R.; Stork, K.; McGovern, L. J.

    1981-01-01T23:59:59.000Z

    It is a well known fact that the gas turbine in a combined cycle has a higher inherent Carnot efficiency than the steam cycle which has been more generally accepted by industry. Unlike steam turbines, gas turbines do not require large boiler feed...

  19. Industry Supply Chain Development (Ohio)

    Broader source: Energy.gov [DOE]

    Supply Chain Development programs are focused on targeted industries that have significant growth opportunities for Ohio's existing manufacturing sector from emerging energy resources and...

  20. FAQS Reference Guide – Industrial Hygiene

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the November 2007 edition of DOE-STD-1138-2007, Industrial Hygiene Functional Area Qualification Standard.

  1. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    s Nuclear Industry After Fukushima Jingdong YUAN SummaryT he March 2011 Fukushima nuclear accident has had aand speedy responses to Fukushima-like and other unexpected

  2. (Medium energy particle physics): Annual progress report

    SciTech Connect (OSTI)

    Nefkens, B.M.K.

    1985-10-01T23:59:59.000Z

    Investigations currently carried out by the UCLA Particle Physics Research Group can be arranged into four programs: Pion-Nucleon Scattering; Tests of Charge Symmetry and Isospin Invariance; Light Nuclei (Strong Form Factors of /sup 3/H, /sup 3/He, /sup 4/He; Detailed Balance in pd /r reversible/ /gamma//sup 3/H; Interaction Dynamics); and Search for the Rare Decay /Mu//sup +/ /yields/ e/sup +/ + /gamma/ (MEGA). The general considerations which led to the choice of physics problems investigated by our group are given in the next section. We also outline the scope of the research being done which includes over a dozen experiments. The main body of this report details the research carried out in the past year, the status of various experiments, and new projects.

  3. Lyman alpha Transfer in a thick, dusty, and static medium

    E-Print Network [OSTI]

    Sang-Hyeon Ahn; Hee-Won Lee; Hyung-Mok Lee

    2000-06-13T23:59:59.000Z

    We developed a Monte Carlo code that describes the resonant Lyman alpha line transfer in an optically thick, dusty, and static medium. The code was tested against the analytic formula derived by Neufeld (1990). We explain the line transfer mechanism for a wide range of line center optical depths by tracing histories of photons in the medium. We find that photons escape from the medium by a series of wing scatterings, during which polarization may develop. We applied our code to examine the amount of dust extinction around the Lyman alpha in primeval galaxies. Brief discussions on the astrophysical application of our work are presented.

  4. EARLY AFTERGLOWS OF GAMMA-RAY BURSTS IN A STRATIFIED MEDIUM WITH A POWER-LAW DENSITY DISTRIBUTION

    SciTech Connect (OSTI)

    Yi, Shuang-Xi; Dai, Zi-Gao [School of Astronomy and Space Science, Nanjing University, Nanjing 210093 (China); Wu, Xue-Feng, E-mail: dzg@nju.edu.cn [Purple Mountain Observatory, Chinese Academy of Sciences, Nanjing 210008 (China)

    2013-10-20T23:59:59.000Z

    A long-duration gamma-ray burst (GRB) has been widely thought to arise from the collapse of a massive star, and it has been suggested that its ambient medium is a homogenous interstellar medium (ISM) or a stellar wind. There are two shocks when an ultra-relativistic fireball that has been ejected during the prompt gamma-ray emission phase sweeps up the circumburst medium: a reverse shock that propagates into the fireball, and a forward shock that propagates into the ambient medium. In this paper, we investigate the temporal evolution of the dynamics and emission of these two shocks in an environment with a general density distribution of n?R {sup –k} (where R is the radius) by considering thick-shell and thin-shell cases. A GRB afterglow with one smooth onset peak at early times is understood to result from such external shocks. Thus, we can determine the medium density distribution by fitting the onset peak appearing in the light curve of an early optical afterglow. We apply our model to 19 GRBs and find that their k values are in the range of 0.4-1.4, with a typical value of k ? 1, implying that this environment is neither a homogenous ISM with k = 0 nor a typical stellar wind with k = 2. This shows that the progenitors of these GRBs might have undergone a new mass-loss evolution.

  5. Effective medium approach for stiff polymer networks with flexible cross-links

    E-Print Network [OSTI]

    C. P. Broedersz; C. Storm; F. C. MacKintosh

    2008-11-24T23:59:59.000Z

    Recent experiments have demonstrated that the nonlinear elasticity of in vitro networks of the biopolymer actin is dramatically altered in the presence of a flexible cross-linker such as the abundant cytoskeletal protein filamin. The basic principles of such networks remain poorly understood. Here we describe an effective medium theory of flexibly cross-linked stiff polymer networks. We argue that the response of the cross-links can be fully attributed to entropic stiffening, while softening due to domain unfolding can be ignored. The network is modeled as a collection of randomly oriented rods connected by flexible cross-links to an elastic continuum. This effective medium is treated in a linear elastic limit as well as in a more general framework, in which the medium self-consistently represents the nonlinear network behavior. This model predicts that the nonlinear elastic response sets in at strains proportional to cross-linker length and inversely proportional to filament length. Furthermore, we find that the differential modulus scales linearly with the stress in the stiffening regime. These results are in excellent agreement with bulk rheology data.

  6. Generalized concatenated quantum codes

    E-Print Network [OSTI]

    Grassl, Markus

    We discuss the concept of generalized concatenated quantum codes. This generalized concatenation method provides a systematical way for constructing good quantum codes, both stabilizer codes and nonadditive codes. Using ...

  7. Political Institutional Change, Obsolescing Legitimacy, and Multinational Corporations: The Case of the Central American Banana Industry

    E-Print Network [OSTI]

    Bucheli, Marcelo; Kim, Min-Young

    2012-12-01T23:59:59.000Z

    because they have similar characteristics to UFCO (exploiting an agricultural good that could only be grown in the tropics). These firms are US Rubber, Firestone, Goodyear, Goodrich, and General Tire in the rubber industry. We are aware that a high...

  8. COLLEGE OF OPTICS AND PHOTONICS: CREOL & FPCE Industrial Affiliates Day Friday April 1, 2005

    E-Print Network [OSTI]

    Van Stryland, Eric

    COLLEGE OF OPTICS AND PHOTONICS: CREOL & FPCE Industrial Affiliates Day ­ Friday April 1, 2005 "Optics & Photonics ­ Envisioning the Future" ­ Projecting Today's Research Into Tomorrow's Applications:45 "Optics & Photonics in Manufacturing..." Dr. Bruce Craig VP and General Manager, Laser Division, Newport

  9. Valuation of procurement flexibility in the machinery and equipment industry using the real option approach

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Valuation of procurement flexibility in the machinery and equipment industry using the real option situation of production networks of machine tool and equipment manufacturers will be described. Secondly reliability, flexibility, procurement, real options. 1 Introduction Besides the general market fluctuations

  10. KNOWLEDGE MANAGEMENT FOR INDUSTRIAL SAFETY, GENERIC RESOURCE PLATFORM COMBINED WITH AN ONTOLOGY BASED APPROACH

    E-Print Network [OSTI]

    Boyer, Edmond

    the regulatory framework to the details of a machine or a process but also includes the general knowledge about conclusions concerning the petrochemical industry, Z. Nivolianitou considers that there is a lack of proper

  11. The Impacts of Utility-Sponsored Demand-Side Management Programs on Industrial Electricity Consumers

    E-Print Network [OSTI]

    Rosenblum, J. I.

    in this paper of the arguments and recommendations of DSM-advocates are general, particular attention is paid to the potentially damaging effects of these proposals on large commercial and industrial customers....

  12. e-Business W@tch European Commission, DG Enterprise & Industry

    E-Print Network [OSTI]

    1 e-Business W@tch European Commission, DG Enterprise & Industry E-mail: entr publications and resources prepared by e-Business W@tch. The European Commission, Enterprise & Industry Directorate General, launched e-Business W@tch in late 2001 to monitor the growing maturity of electronic

  13. Creating Value Wood Products Industry

    E-Print Network [OSTI]

    Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

  14. Forschungsschwerpunkt S92 Industrial Geometry

    E-Print Network [OSTI]

    Jüttler, Bert

    Forschungsschwerpunkt S92 Industrial Geometry http://www.ig.jku.at Computational Geometry Robot Kinematics Computer Aided Geometric Design Image Processing INDUSTRIAL GEOMETRY Classical Geometry Computer unwanted branches of the implicitly defined curves. Moreover, it is required for many applications, e

  15. Oklahoma Industrial Energy Management Program

    E-Print Network [OSTI]

    Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

    1979-01-01T23:59:59.000Z

    The need for sound energy management is no longer worthy of debate. Action is necessary and much is being done by U.S. industry. Unfortunately, however, the majority of the work is being done by the few large energy intensive industries throughout...

  16. Industrial Wastes as a Fuel

    E-Print Network [OSTI]

    Richardson, G.; Hendrix, W.

    1980-01-01T23:59:59.000Z

    available for coal since it was at one time a major industrial fuel and is still used extensively for electric power generation. However, combustion data for other fuels such as wood and solid materials typically generated as industrial wastes can only...

  17. Petroleum industry assists hurricane relief

    SciTech Connect (OSTI)

    Not Available

    1992-09-14T23:59:59.000Z

    This paper reports that the petroleum industry is aiding victims of last month's Hurricane Andrew with cash, clothing, food, water, and other supplies. Cash contributions announced as of last week totaled more than $2.7 million for distribution in South Florida and South Louisiana. Petroleum industry employees were collecting relief items such as bottled water and diapers for distribution in those areas.

  18. Career Choices: Industry vs. Academia

    E-Print Network [OSTI]

    Rohs, Remo

    Career Choices: Industry vs. Academia Yan Liu Assistant Professor Computer Science Department, IBM TJ Watson Research Center · Now, USC #12;1) What career path did you consider most during your Ph industry, and where can one make the most impact? · Best virtues in all jobs ­ Hardworking ­ Good attitude

  19. A General Relativistic Generalization of Bell Inequality

    E-Print Network [OSTI]

    Vladan Pankovic

    2005-06-16T23:59:59.000Z

    In this work a general relativistic generalization of Bell inequality is suggested. Namely,it is proved that practically in any general relativistic metric there is a generalization of Bell inequality.It can be satisfied within theories of local (subluminal) hidden variables, but it cannot be satisfied in the general case within standard quantum mechanical formalism or within theories of nonlocal (superluminal) hidden variables. It is shown too that within theories of nonlocal hidden variables but not in the standard quantum mechanical formalism a paradox appears in the situation when one of the correlated subsystems arrives at a Schwarzschild black hole. Namely, there is no way that black hole horizon obstructs superluminal influences between spin of the subsystem without horizon and spin of the subsystem within horizon,or simply speaking,there is none black hole horizon nor "no hair" theorem for subsystems with correlated spins. It implies that standard quantum mechanical formalism yields unique consistent and complete description of the quantum mechanical phenomenons.

  20. Multiphase turbulent interstellar medium: some recent results from radio astronomy

    E-Print Network [OSTI]

    Roy, Nirupam

    2015-01-01T23:59:59.000Z

    The radio frequency 1.4 GHz transition of the atomic hydrogen is one of the important tracers of the diffuse neutral interstellar medium. Radio astronomical observations of this transition, using either a single dish telescope or an array interferometer, reveal different properties of the interstellar medium. Such observations are particularly useful to study the multiphase nature and turbulence in the interstellar gas. Observations with multiple radio telescopes have recently been used to study these two closely related aspects in greater detail. Using various observational techniques, the density and the velocity fluctuations in the Galactic interstellar medium was found to have a Kolmogorov-like power law power spectra. The observed power law scaling of the turbulent velocity dispersion with the length scale can be used to derive the true temperature distribution of the medium. Observations from a large ongoing atomic hydrogen absorption line survey have also been used to study the distribution of gas at d...

  1. Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington D.C. vssarravt068miyasato2010p.pdf More Documents & Publications Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration and Evaluation SCAQMD:Plug-In...

  2. aqueous medium including: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  3. anisotropic porous medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    outflows ... Germain, Joel; Martel, Hugo 2009-01-01 24 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  4. aqueous medium propriedades: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  5. aqueous medium promoted: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chennakesava Reddy; Gudimella Santosh Kumar 2012-01-01 2 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  6. absorbing gaseous medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2001-01-01 17 Gravitational drag on a point mass in hypersonic motion through a gaseous medium CERN Preprints Summary: We explore a ballistic orbit model to infer the...

  7. areas medium sized: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 to Medium Sized Enterprises CiteSeer Summary: Knowledge Management has been identified as a...

  8. aqueous medium formacion: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  9. aqueous medium viewing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  10. aqueous alkaline medium: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    which is essential for the formation Sahai, Nita 2 Ultrasonic measurement of porous medium in an aqueous environment Texas A&M University - TxSpace Summary: August 1995 Major...

  11. Gluon Radiation off Massive Quarks in a QCD Medium

    E-Print Network [OSTI]

    N. Armesto; C. A. Salgado; U. A. Wiedemann

    2004-05-19T23:59:59.000Z

    Medium-induced gluon radiation from massless and massive quarks is treated in the same formalism. The dead cone which regulates gluon radiation from massive quarks in the vacuum at small angles, is filled in the medium but constitutes a small fraction of the available phase space. Our study indicates that the energy loss for charmed hadrons at RHIC should be smaller than for light hadrons, but still sizable.

  12. Lyman alpha Absorption Systems and the Intergalactic Medium

    E-Print Network [OSTI]

    George Efstathiou; Joop Schaye; Tom Theuns

    2000-04-10T23:59:59.000Z

    The last few years have seen a dramatic improvement in our understanding of the origin of Lyman alpha absorption systems. Hydrodynamic numerical simulations of cold dark matter dominated universes have shown that the many properties of the Lyman alpha absorption systems can be explained by a photoionized, space-filling, intergalactic medium. Lyman alpha lines offer promising probes of the photoionizing background, the amplitude of the mass fluctuations at high redshift and the evolution of the equation of state of the intergalactic medium.

  13. Structure functions of free and in-medium nucleons

    SciTech Connect (OSTI)

    Ian Cloet; W. Bentz; Anthony Thomas

    2005-04-01T23:59:59.000Z

    Spin-dependent quark light-cone momentum distributions are calculated for a nucleon in the nuclear medium. We utilize a modified NJL model where the nucleon is described as a composite quark-diquark state. Scalar and vector mean fields are incorporated in the nuclear medium and these fields couple to the confined quarks in the nucleon. The effect of these fields on the spin-dependent distributions is investigated. Our results for the ''spin-dependent EMC effect'' are also discussed.

  14. Ultimate disposal of low and medium radioactive waste in France

    SciTech Connect (OSTI)

    Ringeard, C. [National Radioactive Waste Management Agency, Fontenay aux Roses (France). Environmental, Safety, Quality Dept.

    1993-12-31T23:59:59.000Z

    The National Radioactive Waste Management Agency (ANDRA) has been entrusted with the long-term management of radioactive waste. This paper presents the methodology of safety assessment used by ANDRA for a land disposal facility of radioactive waste with short or medium half-life and with low or medium specific activity. This methodology was used in the design of ``the Centre de stockage de l`Aube``.

  15. Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry Swindall, VP, Business & Industry Development, WI Economic Development Corporation Manuel Sattig, BMW Group

  16. Energy Efficiency Improvement and Cost Saving Opportunities for the Vehicle Assembly Industry: An ENERGY STAR Guide for Energy and Plant Managers

    E-Print Network [OSTI]

    Galitsky, Christina

    2008-01-01T23:59:59.000Z

    Caffal, C. (1995). Energy Management in Industry. Centre forPollution Prevention/Energy Management. General Motorsactions, develop an energy management plan for business; and

  17. Office of Industry Research and Technology Programs Greetings to Industry

    E-Print Network [OSTI]

    Ginzel, Matthew

    . This effort has developed into a new initiative, a Systems Approach to Integrated Sustainability of Aviation the competitiveness and innovation of small and medium sized businesses in the U.S. manufacturing supply chain. Purdue in engines and aircraft and pro- vides data related to fuel-sustainability and emissions goals

  18. Energy conservation guide for industrial processes

    SciTech Connect (OSTI)

    Not Available

    1981-01-01T23:59:59.000Z

    Th Energy Conservation Guide for industrial processes has simple instructions to survey energy use areas at Navy industrial activities like shipyards, Naval air rework facilities and government owned, contractor operated (GOCO) plants. This guide includes information and procedures on: organizing and conducting an industrial energy survey; evaluating purchased energy data; descriptions of industrial systems; and evaluation of industrial processes for conservation.

  19. AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A

    E-Print Network [OSTI]

    AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A Donald Bradley Morgan Bruns Adam Fleming Jay Ling on the automotive industry, specifically, large-scale manufacturers of automobiles. The automotive industry of the automotive industry. This is followed by an analysis of the industry's structural characteristics using

  20. Value of medium range weather forecasts in the improvement of seasonal hydrologic prediction skill

    SciTech Connect (OSTI)

    Shukla, Shraddhanand; Voisin, Nathalie; Lettenmaier, D. P.

    2012-08-15T23:59:59.000Z

    We investigated the contribution of medium range weather forecasts with lead times up to 14 days to seasonal hydrologic prediction skill over the Conterminous United States (CONUS). Three different Ensemble Streamflow Prediction (ESP)-based experiments were performed for the period 1980-2003 using the Variable Infiltration Capacity (VIC) hydrology model to generate forecasts of monthly runoff and soil moisture (SM) at lead-1 (first month of the forecast period) to lead-3. The first experiment (ESP) used a resampling from the retrospective period 1980-2003 and represented full climatological uncertainty for the entire forecast period. In the second and third experiments, the first 14 days of each ESP ensemble member were replaced by either observations (perfect 14-day forecast) or by a deterministic 14-day weather forecast. We used Spearman rank correlations of forecasts and observations as the forecast skill score. We estimated the potential and actual improvement in baseline skill as the difference between the skill of experiments 2 and 3 relative to ESP, respectively. We found that useful runoff and SM forecast skill at lead-1 to -3 months can be obtained by exploiting medium range weather forecast skill in conjunction with the skill derived by the knowledge of initial hydrologic conditions. Potential improvement in baseline skill by using medium range weather forecasts, for runoff (SM) forecasts generally varies from 0 to 0.8 (0 to 0.5) as measured by differences in correlations, with actual improvement generally from 0 to 0.8 of the potential improvement. With some exceptions, most of the improvement in runoff is for lead-1 forecasts, although some improvement in SM was achieved at lead-2.

  1. Membrane Development for Medium and High Temperature PEMFC in...

    Broader source: Energy.gov (indexed) [DOE]

    between Industry - European Commission - Research Organisations * The JTI is a new management structure that will allow efficient organisation of the R&DD resources in...

  2. MECH 386 INDUSTRIAL FLUID MECHANICS INDUSTRIAL FLUID MECHANICS

    E-Print Network [OSTI]

    technologies - Wind turbine - Wave energy (Wells turbine) - Tidal power 7. Flow in porous media - Darcy's law 8 - Positive displacement pumps - Systems of pumps - Industrial practice (Guest speaker) 6. Renewable energy

  3. The industrial ecology of the iron casting industry

    E-Print Network [OSTI]

    Jones, Alissa J. (Alissa Jean)

    2007-01-01T23:59:59.000Z

    Metal casting is an energy and materials intensive manufacturing process, which is an important U.S. industry. This study analyzes iron casting, in particular, for possible improvements that will result in greater efficiencies ...

  4. 1. Introduction A porous material is a two-phase medium consisting of a solid part (skeleton) and a fluid

    E-Print Network [OSTI]

    Boyer, Edmond

    as a sound absorber in the fight against noise pollution. The polyurethane foam, felt or glass wools are three examples of common materials used in aerospace and automotive industries and in building construction. Generally, when a sound wave propagates through a porous material saturated with air

  5. Biofuel Boundaries: Estimating the Medium-Term Supply Potential of Domestic Biofuels

    E-Print Network [OSTI]

    Jones, Andrew; O'Hare, Michael; Farrell, Alexander

    2007-01-01T23:59:59.000Z

    Biofuel Boundaries: Estimating the Medium-Term SupplyAugust 22, 2007 Biofuel Boundaries: Estimating the Medium-significant amount of liquid biofuel (equivalent to 30-100%

  6. Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings

    E-Print Network [OSTI]

    Page, Janie

    2012-01-01T23:59:59.000Z

    Demand Response for Small Commercial Buildings.   Lawrence small?medium buildings’ roles in demand response  efforts.  demand response for small? medium commercial buildings 

  7. Canada's Voluntary Industrial Energy Conservation Program

    E-Print Network [OSTI]

    Wolf, C. A., Jr.

    1980-01-01T23:59:59.000Z

    Industrial Energy Conservation in Canada is organized and promoted through a voluntary program that is administered by industry. Industry is divided into fifteen sectors, each of which is represented by a Voluntary Task Force. Information exchange...

  8. Heat Recovery in the Forge Industry

    E-Print Network [OSTI]

    Shingledecker, R. B.

    1982-01-01T23:59:59.000Z

    Department of Energy figures reveal that in 1979 the forging and stamping operations were the primary consumers of energy (27%) within the 'Fabricated Metals Products Industry' (SIC 34). Industrial furnaces utilized by the forging industry often...

  9. Industrial Geospatial Analysis Tool for Energy Evaluation

    E-Print Network [OSTI]

    Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

    2013-01-01T23:59:59.000Z

    of manufacturing industries based on each type of industries using information from DOE's Industrial Assessment Center database (IAC-DB) and DOE's Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition...

  10. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2011/2012 September).................1 REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH (30).....................................................................................................2 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  11. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2010/2011 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH)...................................................................................................1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  12. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2009/2010 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING (30 CREDITS)...............1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

  13. GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2013/2014 September..............................3 C. COURSE REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS............................4 E. DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH

  14. Effective Transfer of Industrial Energy Conservation Technologies

    E-Print Network [OSTI]

    Clement, M.; Vallario, R. W.

    1983-01-01T23:59:59.000Z

    , and acceptance by industry of new energy conserving technologies. These new technologies were developed through cost sharing programs between the Department of Energy and private industry. These joint efforts reduced the risk to industry, thus making them willing...

  15. Generalizations of quantum statistics

    E-Print Network [OSTI]

    O. W. Greenberg

    2008-05-02T23:59:59.000Z

    We review generalizations of quantum statistics, including parabose, parafermi, and quon statistics, but not including anyon statistics, which is special to two dimensions.

  16. Generalized discoid lupus erythematosus

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    was diagnostic of discoid lupus erythematosus (DLE).A minority of patients with DLE progress to develop systemicalthough generalized DLE is more frequently associated with

  17. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    Brief 2013-9 January 2013 China’s Nuclear Industry Aftera significant impact on the future of China’s nuclear power.the importance of safety as China builds more nuclear power

  18. Energy Savings in Industrial Buildings 

    E-Print Network [OSTI]

    Zhou, A.; Tutterow, V.; Harris, J.

    2009-01-01T23:59:59.000Z

    , and electricity for equipment such as pumps, air compressors, and fans. Lesser, yet significant, amounts of energy are used for industrial buildings – heating, ventilation, and air conditioning (HVAC), lighting and facility use (such as office equipment). Due...

  19. CALIFORNIA ENERGY PETROLEUM INDUSTRY INFORMATION

    E-Print Network [OSTI]

    PETROLEUM AND NON-PETROLEUM ................................................... 40 PRODUCT DEFINITIONS Major Petroleum Product Storer and Terminal Weekly Report Major petroleum product storers, terminalCALIFORNIA ENERGY COMMISSION PETROLEUM INDUSTRY INFORMATION REPORTING ACT (PIIRA) PROGRAM REPORTING

  20. Industrial Plans for AEO2014

    U.S. Energy Information Administration (EIA) Indexed Site

    you for your attention 10 Industrial Team Washington DC, July 30, 2013 Macro Team: Kay Smith (202) 586-1132 | kay.smith@eia.gov Vipin Arora (202) 586-1048 | vipin.arora@eia.gov...

  1. Three Essays on Industrial Organization

    E-Print Network [OSTI]

    Lee, Yang Seung

    2008-12-18T23:59:59.000Z

    The dissertation discusses issues in the field of industrial organization. When the government provides better infrastructure to competing firms for innovation, private firms' R&D expenditures are affected. When the ...

  2. Hazardous and Industrial Waste (Minnesota)

    Broader source: Energy.gov [DOE]

    This section describes standards that must be met by facilities generating and processing hazardous and industrial waste, as well as required permits for the construction and operation of such a...

  3. Uncertainty, investment, and industry evolution

    E-Print Network [OSTI]

    Caballero, Ricardo J.

    1992-01-01T23:59:59.000Z

    We study the effects of aggregate and idiosyncratic uncertainty on the entry of firms, total investment, and prices in a competitive industry with irreversible investment. We first use standard dynamic programming methods ...

  4. Outlook for Industrial Energy Benchmarking 

    E-Print Network [OSTI]

    Hartley, Z.

    2000-01-01T23:59:59.000Z

    OUTLOOK FOR INDUSTRIAL ENERGY BENCHMARKING Zoe Hartley Environmental Protection Specialist U.S. Environmental Protection Agency Washington, DC ABSTRACT The U.S. Environmental Protection Agency is exploring options to sponsor an ~d~ ~~gy...

  5. Changing Trends in Telecommunications Industry

    E-Print Network [OSTI]

    Sathyanarayanan, Ramachandran

    2010-12-17T23:59:59.000Z

    The mobile telecommunication industry is one of the fastest growing and continually changing markets in the world today. The greatest achievement of wireless technology is that it has made communications possible in the ...

  6. Innovative Energy Efficient Industrial Ventilation

    E-Print Network [OSTI]

    Litomisky, A.

    2005-01-01T23:59:59.000Z

    factories, we found striking dichotomy between the classical “static” design of ventilation systems and constantly changing workflow and business demands. Using data from real factories, we are able to prove that classical industrial ventilation design...

  7. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01T23:59:59.000Z

    2013-9 January 2013 China’s Nuclear Industry After FukushimaMarch 2011 Fukushima nuclear accident has had a significanton the future of China’s nuclear power. First, it highlights

  8. Industrial Mathematics and Inverse Problems

    E-Print Network [OSTI]

    Fulmek, Markus

    #12;The Industrial Mathematics Structure in Linz 5 #12;The Blast Furnace Process 6 #12;Aims": Looking for causes of an observed or desired effect! A.Tikhonov ( 1936), geophysical problems. F

  9. Outlook for Industrial Energy Benchmarking

    E-Print Network [OSTI]

    Hartley, Z.

    The U.S. Environmental Protection Agency is exploring options to sponsor an industrial energy efficiency benchmarking study to identify facility specific, cost-effective best practices and technologies. Such a study could help develop a common...

  10. Integrated Industrial Wood Chip Utilization

    E-Print Network [OSTI]

    Owens, E. T.

    1984-01-01T23:59:59.000Z

    The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

  11. Electric Utility Industrial Conservation Programs

    E-Print Network [OSTI]

    Norland, D. L.

    1983-01-01T23:59:59.000Z

    The Alliance to Save Energy conducted a study, funded by the John A. Hartford Foundation, of industrial and commercial electricity conservation opportunities in the service territory of Arkansas Power and Light Company (AP&L). The study determined...

  12. Government-University-Industrial Collaborations for Energy Efficiency and a Better Environment 

    E-Print Network [OSTI]

    Phillips, W. C.

    1997-01-01T23:59:59.000Z

    as a technically viable component to efficient boiler operation, a boiler control display was installed at an industrial facility to monitor the effect of the installation of oxygen adjustment as a function of monitoring carbon monoxide Integration... of carbon monoxide sensors with an O 2 boiler control system provides a substantial increase in energy savings and reliability. While this technology is highly effective its impact has been minimized due to the number of small to medium sized boilers...

  13. EPRI's Industrial Energy Management Program

    E-Print Network [OSTI]

    Mergens, E.; Niday, L.

    EPRI's INDUSTRIAL ENERGY MANAGEMENT PROGRAM ED MERGENS MANAGER EPRI's CHEMICALS & PETROLEUM OFFICE HOUSTON, TEXAS ABSTRACT The loss of American industry jobs to foreign competition is made worse by national concerns over fuels combustion... are funded at a level in excess of SlO million annually. By providing technical guidance and sponsoring research and development projects, these Centers and Offices are a key element in EPRI's role of improving the value of electricity to consumers...

  14. Medium Modifications of Hadron Properties and Partonic Processes

    SciTech Connect (OSTI)

    W. K. Brooks, S. Strauch, K. Tsushima

    2011-06-01T23:59:59.000Z

    Chiral symmetry is one of the most fundamental symmetries in QCD. It is closely connected to hadron properties in the nuclear medium via the reduction of the quark condensate , manifesting the partial restoration of chiral symmetry. To better understand this important issue, a number of Jefferson Lab experiments over the past decade have focused on understanding properties of mesons and nucleons in the nuclear medium, often benefiting from the high polarization and luminosity of the CEBAF accelerator. In particular, a novel, accurate, polarization transfer measurement technique revealed for the first time a strong indication that the bound proton electromagnetic form factors in 4He may be modified compared to those in the vacuum. Second, the photoproduction of vector mesons on various nuclei has been measured via their decay to e+e- to study possible in-medium effects on the properties of the rho meson. In this experiment, no significant mass shift and some broadening consistent with expected collisional broadening for the rho meson has been observed, providing tight constraints on model calculations. Finally, processes involving in-medium parton propagation have been studied. The medium modifications of the quark fragmentation functions have been extracted with much higher statistical accuracy than previously possible.

  15. Colorado State University Industrial Assessment Center Saves...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Assessment Center, inspects equipment at a manufacturing facility during an energy audit. | Photo courtesy of University of Missouri IAC. Industrial Assessment Centers...

  16. Emerging energy-efficient technologies for industry

    E-Print Network [OSTI]

    2001-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for2000. “Emerging Energy-Efficient Industrial Technologies,”Emerging Energy-Efficient Technologies for Industry Ernst

  17. Emerging Energy-Efficient Technologies for Industry

    E-Print Network [OSTI]

    2005-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for200 emerging energy-efficient technologies in industry, of2000. “Emerging Energy-Efficient Industrial Technologies,”

  18. Emerging energy-efficient technologies for industry

    E-Print Network [OSTI]

    2004-01-01T23:59:59.000Z

    1998. “Emerging Energy-Saving Technologies and Practices for2000. “Emerging Energy-Efficient Industrial Technologies,”Emerging Energy-Efficient Technologies for Industry Ernst

  19. Green Industrial Policy: Trade and Theory

    E-Print Network [OSTI]

    Karp, Larry; Stevenson, Megan

    2012-01-01T23:59:59.000Z

    Papers Year 2012 Paper 1126 Green Industrial Policy: Trade© 2012 by author(s). Green Industrial Policy: Trade andreality and the potential for green indus- trial policy. We

  20. Industrial and Organizational Psychology Doctoral Program Handbook

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Industrial and Organizational Psychology Doctoral Program Handbook University of Central Florida chosen the University of Central Florida for your graduate training in Industrial and Organizational

  1. ITP Industrial Distributed Energy: Distributed Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ITP Industrial Distributed Energy: Distributed Energy Program Project Profile: Verizon Central Office Building ITP Industrial Distributed Energy: Distributed Energy Program Project...

  2. Tax-Exempt Industrial Revenue Bonds (Kansas)

    Broader source: Energy.gov [DOE]

    Tax-Exempt Industrial Revenue Bonds are issued by cities and counties for the purchase, construction, improvement or remodeling of a facility for agricultural, commercial, hospital, industrial,...

  3. EIS-0428: Mississippi Gasification, LLC, Industrial Gasification...

    Broader source: Energy.gov (indexed) [DOE]

    8: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS EIS-0428: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS...

  4. ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aluminum Industry Vision: Sustainable Solutions for a Dynamic World ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions for a Dynamic World alumvision.pdf More Documents...

  5. EIS-0429: Indiana Gasification, LLC, Industrial Gasification...

    Office of Environmental Management (EM)

    9: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport, IN and CO2 Pipeline EIS-0429: Indiana Gasification, LLC, Industrial Gasification Facility in Rockport,...

  6. Joint Capability Technology Demonstration (JCTD) Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Agenda outlines the activities of the 2014...

  7. Industrial Energy Efficiency and Climate Change Mitigation

    E-Print Network [OSTI]

    Worrell, Ernst

    2009-01-01T23:59:59.000Z

    mitigate 21 MtCO 2 . Cogeneration (also called Combined Heatefficiencies. Industrial cogeneration is an important partpotential for industrial cogeneration is estimated at almost

  8. Sector-specific issues and reporting methodologies supporting the General Guidelines for the voluntary reporting of greenhouse gases under Section 1605(b) of the Energy Policy Act of 1992. Volume 1: Part 1, Electricity supply sector; Part 2, Residential and commercial buildings sector; Part 3, Industrial sector

    SciTech Connect (OSTI)

    Not Available

    1994-10-01T23:59:59.000Z

    DOE encourages you to report your achievements in reducing greenhouse gas emissions and sequestering carbon under this program. Global climate change is increasingly being recognized as a threat that individuals and organizations can take action against. If you are among those taking action, reporting your projects may lead to recognition for you, motivation for others, and synergistic learning for the global community. This report discusses the reporting process for the voluntary detailed guidance in the sectoral supporting documents for electricity supply, residential and commercial buildings, industry, transportation, forestry, and agriculture. You may have reportable projects in several sectors; you may report them separately or capture and report the total effects on an entity-wide report.

  9. Gamma-ray burst interaction with dense interstellar medium

    E-Print Network [OSTI]

    Maxim Barkov; Gennady Bisnovatyi-Kogan

    2004-10-07T23:59:59.000Z

    Interaction of cosmological gamma ray burst radiation with the dense interstellar medium of host galaxy is considered. Gas dynamical motion of interstellar medium driven by gamma ray burst is investigated in 2D approximation for different initial density distributions of host galaxy matter and different total energy of gamma ray burst. The maximum velocity of motion of interstellar medium is $1.8\\cdot10^4$ km/s. Light curves of gamma ray burst afterglow are calculated for set of non homogeneous density, distribution gamma ray burst total energy, and different viewing angles. Spectra of gamma ray burst afterglow are modeled taking into account conversion of hard photons (soft X-ray, hard UV) to soft UV and optics photons.

  10. Turbulence production and turbulent pressure support in the intergalactic medium

    E-Print Network [OSTI]

    Iapichino, L; Niemeyer, J C; Merklein, J

    2011-01-01T23:59:59.000Z

    The injection and evolution of turbulence in the intergalactic medium is studied by means of mesh-based hydrodynamical simulations, including a subgrid scale (SGS) model for small-scale unresolved turbulence. The simulations show that the production of turbulence has a different redshift dependence in the intracluster medium (ICM) and the warm-hot intergalactic medium (WHIM). We show that turbulence in the ICM is produced chiefly by merger-induced shear flows, whereas the production in the WHIM is dominated by shock interactions. Secondly, the effect of dynamical pressure support on the gravitational contraction has been studied. This turbulent support is stronger in the WHIM gas at baryon overdensities 1 < delta < 100, and less relevant for the ICM. Although the relative mass fraction of the gas with large vorticity is considerable (52% in the ICM), we find that for only about 10% in mass this is dynamically relevant, namely not associated to an equally large thermal pressure support. According to this...

  11. Generalized Galilean Genesis

    E-Print Network [OSTI]

    Nishi, Sakine

    2015-01-01T23:59:59.000Z

    The galilean genesis scenario is an alternative to inflation in which the universe starts expanding from Minkowski in the asymptotic past by violating the null energy condition stably. Several concrete models of galilean genesis have been constructed so far within the context of galileon-type scalar-field theories. We give a generic, unified description of the galilean genesis scenario in terms of the Horndeski theory, i.e., the most general scalar-tensor theory with second-order field equations. In doing so we generalize the previous models to have a new parameter (denoted by {\\alpha}) which results in controlling the evolution of the Hubble rate. The background dynamics is investigated to show that the generalized galilean genesis solution is an attractor, similarly to the original model. We also study the nature of primordial perturbations in the generalized galilean genesis scenario. In all the models described by our generalized genesis Lagrangian, amplification of tensor perturbations does not occur as ...

  12. amenagement durables industrie: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CLUSTERS? INDUSTRY CLUSTERS IN MINNESOTA INDUSTRY CLUSTER APPROACHES IN MINNESOTA INDUSTRY CLUSTER Levinson, David M. 379 Energy Conservation in China North Industries...

  13. Industry survey for horizontal wells. Final report

    SciTech Connect (OSTI)

    Wilson, D.D.; Kaback, D.S. [CDM Federal Programs Corp., Denver, CO (United States); Denhan, M.E. [Westinghouse Savannah River Co., Aiken, SC (United States); Watkins, D. [CDM Federal Programs Corp., Aiken, SC (United States)

    1993-07-01T23:59:59.000Z

    An international survey of horizontal environmental wells was performed during May and June of 1993. The purpose of the survey was to provide the environmental industry with an inventory of horizontal environmental wells and information pertaining to the extent of the use of horizontal environmental wells, the variety of horizontal environmental well applications, the types of geologic and hydrogeologic conditions within which horizontal environmental wells have been installed, and the companies that perform horizontal environmental well installations. Other information, such as the cost of horizontal environmental well installations and the results of tests performed on the wells, is not complete but is provided as general information with the caveat that the information should not be used to compare drilling companies. The result of the survey is a catalogue of horizontal environmental wells that are categorized by the objective or use of the wells, the vertical depth of the wells, and the drilling company contracted to install the wells.

  14. Strategic direction for the IAQ industry

    SciTech Connect (OSTI)

    Wendl, D. [Trane Co., Englewood, CO (United States)

    1996-12-31T23:59:59.000Z

    Over the past 20 years, there has been much concern over pollution of the outdoor environment. In recent years, concern over indoor pollution, commonly referred to as indoor air quality, has grown as well. Indoor air quality is a complex, multi-faceted issue. Contaminant source control, ventilation, humidity control, filtration, occupant activities and building operation and maintenance all play a role in creating a healthy productive indoor environment. These elements of IAQ are complex enough to spend days studying each of them. For the purposes of this article, the author will be looking specifically at the direction the HVAC industry is taking in the areas of ventilation, energy efficiency, humidity and comfort control to produce more healthy, productive and energy efficient buildings. Indoor air quality is broader than just the direct effects to human health. It also can significantly impact building occupant productivity and general well-being.

  15. Energy trapping and shock disintegration in a composite granular medium

    E-Print Network [OSTI]

    C. Daraio; V. F. Nesterenko; E. B. Herbold; S. Jin

    2005-09-24T23:59:59.000Z

    Granular materials demonstrate a strongly nonlinear behavior influencing the wave propagation in the medium. We report the first experimental observation of impulse energy confinement and the resultant disintegration of shock and solitary waves. The medium consists of alternating ensambles of high-modulus vs orders of magnitude lower modulus chains of different masses. The trapped energy is contained within the "softer" portions of the composite chain and is slowly released in the form of weak, separated pulses over an extended period of time. This effect is enhanced by using a specific group assembly and superimposed force.

  16. Nucleon Electromagnetic Form Factors: Free Space and Medium Modifications

    SciTech Connect (OSTI)

    Wally Melnitchouk

    2003-10-01T23:59:59.000Z

    We review recent developments in the study of electromagnetic form factors of the nucleon, both in free space and in the nuclear medium. For the free nucleon case, we discuss the ratio of electric to magnetic proton form factors, and the influence of two-photon exchange on the form factor extraction. For the bound nucleon, we examine the implications of the small but non-zero modification of proton form factors in the nuclear medium suggested by recent data on polarized proton knockout reactions off He-4, and discuss constraints which it could place on models of the nuclear EMC effect.

  17. Generalized interaction in multigravity

    E-Print Network [OSTI]

    Duplij, Steven

    2013-01-01T23:59:59.000Z

    A general approach to description of multigravity models in D-dimensional space-time is presented. Different possibilities of generalization of the invariant volume are given. Then a most general form of the interaction potential is constructed, which for bigravity coincides with the Pauli-Fierz model. A thorough analysis of the model along the 3+1 expansion formalism is done. It is shown that the absence of ghosts the considered bigravity model is equivalent in the weak field limit to the massive gravity (the Pauli-Fierz model). Thus, on the concrete example it is shown, that the interaction between metrics leads to nonvanishing mass of graviton.

  18. Energy conservation and cost benefits in the dairy processing industry

    SciTech Connect (OSTI)

    none,

    1982-01-01T23:59:59.000Z

    Guidance is given on measuring energy consumption in the plant and pinpointing areas where energy-conservation activities can return the most favorable economics. General energy-conservation techniques applicable to most or all segments of the dairy processing industry, including the fluid milk segment, are emphasized. These general techniques include waste heat recovery, improvements in electric motor efficiency, added insulation, refrigeration improvements, upgrading of evaporators, and increases in boiler efficiency. Specific examples are given in which these techniques are applied to dairy processing plants. The potential for energy savings by cogeneration of process steam and electricity in the dairy industry is also discussed. Process changes primarily applicable to specific milk products which have resulted in significant energy cost savings at some facilities or which promise significant contributions in the future are examined. A summary checklist of plant housekeeping measures for energy conservation and guidelines for economic evaluation of conservation alternatives are provided. (MHR)

  19. Characterization of the bacterial metagenome in an industrial algae bioenergy production system

    SciTech Connect (OSTI)

    Huang, Shi [Chinese Academy of Sciences; Fulbright, Scott P [Colorado State University; Zeng, Xiaowei [Chinese Academy of Sciences; Yates, Tracy [Solix Biofuels; Wardle, Greg [Solix Biofuels; Chisholm, Stephen T [Colorado State University; Xu, Jian [Chinese Academy of Sciences; Lammers, Peter [New Mexico State University

    2011-03-16T23:59:59.000Z

    Cultivation of oleaginous microalgae for fuel generally requires growth of the intended species to the maximum extent supported by available light. The presence of undesired competitors, pathogens and grazers in cultivation systems will create competition for nitrate, phosphate, sulfate, iron and other micronutrients in the growth medium and potentially decrease microalgal triglyceride production by limiting microalgal health or cell density. Pathogenic bacteria may also directly impact the metabolism or survival of individual microalgal cells. Conversely, symbiotic bacteria that enhance microalgal growth may also be present in the system. Finally, the use of agricultural and municipal wastes as nutrient inputs for microalgal production systems may lead to the introduction and proliferation of human pathogens or interfere with the growth of bacteria with beneficial effects on system performance. These considerations underscore the need to understand bacterial community dynamics in microalgal production systems in order to assess microbiome effects on microalgal productivity and pathogen risks. Here we focus on the bacterial component of microalgal production systems and describe a pipeline for metagenomic characterization of bacterial diversity in industrial cultures of an oleaginous alga, Nannochloropsis salina. Environmental DNA was isolated from 12 marine algal cultures grown at Solix Biofuels, a region of the 16S rRNA gene was amplified by PCR, and 16S amplicons were sequenced using a 454 automated pyrosequencer. The approximately 70,000 sequences that passed quality control clustered into 53,950 unique sequences. The majority of sequences belonged to thirteen phyla. At the genus level, sequences from all samples represented 169 different genera. About 52.94% of all sequences could not be identified at the genus level and were classified at the next highest possible resolution level. Of all sequences, 79.92% corresponded to 169 genera and 70 other taxa. We apply a principal component analysis across the initial sample set to draw correlations between sample variables and changes in microbiome populations.

  20. Profile of the chemicals industry in California: Californiaindustries of the future program

    SciTech Connect (OSTI)

    Galitsky, Christina; Worrell, Ernst

    2004-06-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) Office of Industrial Technologies (OIT) established the Industries of the Future (IOF) program to increase energy efficiency, reduce waste production and to improve competitiveness, currently focusing on nine sectors. The IOF is a partnership strategy involving industry, the research community and the government, working together to identify technology needs, promote industrial partnerships and implement joint measures with all partners involved. The State Industries of the Future (SIOF) program delivers the accomplishments of the national Industries of the Future strategy to the local level, to expand the technology opportunities to a larger number of partners and reach smaller businesses and manufacturers that were not initially involved in the IOF effort. The state programs bring together industry, academia, and state agencies to address the important issues confronting industry in the state. These public-private coalitions facilitate industry solutions locally and enhance economic development. California has started a State Industries of the Future effort, in collaboration with the U.S. Department of Energy. The California Energy Commission (CEC) is leading the SIOF program in California, as part of many other programs to improve the energy efficiency and performance of industries in California. The California State IOF program aims to build a network of participants from industry, academia and government in four selected industrial sectors as a basis for the development of a strategic partnership for industrial energy efficient technology in the state. In California the IOF effort focuses petroleum refining, chemical processing, food processing and electronics. As part of this effort, the SIOF program will develop roadmaps for technology development for the selected sectors. On the basis of the roadmap, the program will develop successful projects with co-funding from state and federal government, and promote industry-specific energy-efficiency. An important element of the SIOF-program is the preparation of R&D roadmaps for each of the selected industries. The roadmap will help to identify priority needs for the participating industries to meet their energy challenges. The roadmap effort builds on the roadmaps developed by DOE, and on the conditions specific for the industry in California. Key to the successful preparation of a roadmap in the selected industries is the development of a profile of the industries. The profile provides a basis for the participants in the roadmap-effort, especially as the structure of the industries in California can be different than in the nation. The sector profiles describe the current economic and energy situation of these industries in California, the processes and energy uses, and the potential future developments in each industry. The profiles are an integral part of the roadmap, to help working group partners to evaluate the industry's R&D needs for their industry in California. In this report, we focus on the chemicals industry. The industry is an important economic factor in the state, providing over 82,300 jobs directly, and more in indirect employment. Value of shipments in 2001 was just under $25.7 Billion, or 6% of all manufacturing in California. There are over 1,500 chemical plants in California, of which 52% are pharmaceutical companies. Many companies operate chemical plants in California. The industry consumes 8% of the electricity and 5% of the natural gas in California. In this report, we start with a description of the chemical industry in the United States and California. This is followed by a discussion of the energy consumption and energy intensity of the Californian chemical industry. Chapter 3 focuses on the main sub-sectors. For each of the sub-sectors a general process description is provided in Chapter 4. Based on this analysis, in Chapter 5, we discuss potential technology developments that can contribute to further improving the energy efficiency in chemical plants, with a focus on the situation in California.

  1. On the propagation of a quasi-static disturbance in a heterogeneous, deformable, and porous medium with pressure-dependent properties

    SciTech Connect (OSTI)

    Vasco, D.W.

    2011-10-01T23:59:59.000Z

    Using an asymptotic technique, valid when the medium properties are smoothly-varying, I derive a semi-analytic expression for the propagation velocity of a quasi-static disturbance traveling within a nonlinear-elastic porous medium. The phase, a function related to the propagation time, depends upon the properties of the medium, including the pressure-sensitivities of the medium parameters, and on pressure and displacement amplitude changes. Thus, the propagation velocity of a disturbance depends upon its amplitude, as might be expected for a nonlinear process. As a check, the expression for the phase function is evaluated for a poroelastic medium, when the material properties do not depend upon the fluid pressure. In that case, the travel time estimates agree with conventional analytic estimates, and with values calculated using a numerical simulator. For a medium with pressure-dependent permeability I find general agreement between the semi-analytic estimates and estimates from a numerical simulation. In this case the pressure amplitude changes are obtained from the numerical simulator.

  2. Company Name: General Dynamics Bath Iron Works Web Site: https://www.gdbiw.com

    E-Print Network [OSTI]

    New Hampshire, University of

    Company Name: General Dynamics Bath Iron Works Web Site: https://www.gdbiw.com Industry: Defense's largest city, Portland. Majors they typically recruit: Civil Engineering, Electrical Engineering, Mechanical Engineering Do they offer internships: Our summer internship program provides students

  3. Decision support for the general aviation pilot 

    E-Print Network [OSTI]

    Alcorn, W. P.; Lee, K. A.; Ward, D. T.; Trang, J. A.; Krishnamurthy, K.; Crump, J. W.; Branham, P. A.; Woo, D. L. Y.; Ren-Jye Yu; Robbins, A. C.; Painter, John H.; Kelly, W. E. III

    1997-10-12T23:59:59.000Z

    simulator. Pilot participation in all phases of development and evaluation is the norm. Flight tests have begun on an instrumented research light twin owned by the 0-7803-4053-1/97/$10.00 @ 1997 IEEE products A d services.? factor, a component... will depend on how successful the industry is in stimulating the development of new general aviation Authorized licensed use limited to: Texas A M University. Downloaded on February 16,2010 at 15:01:09 EST from IEEE Xplore. Restrictions apply...

  4. Economic analysis of the European cement industry

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Economic analysis of the European cement industry Marcel Boyer1 and JeanPierre Ponssard2 December 2013. The methodology is applied to the European cement industry over the period 20042012 (Part I) and over the next and industry experts. Key words: return on assets, capital intensive industry, business cycle, European cement

  5. What does an Industrial Engineer really do???

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    What does an Industrial Engineer really do??? #12;What you will learn · What Industrial Engineering is · Examples of Industrial Engineering (IE) activities · The advantages of an IE college degree #12;Engineering does that engineer do? Where? #12;Industrial Engineers Find a Better Way... · A better way to make

  6. Mechanical and Industrial Engineering John Stuart

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical and Industrial Engineering John Stuart Paul Washburn Co-Chairs MIE IAB Meeting #12;2Mechanical and Industrial Engineering Dean Tim Anderson #12;3Mechanical and Industrial Engineering Strategic vision for growing College Goal Method Current resources #12;4Mechanical and Industrial Engineering

  7. Faculty of Engineering Industrial and Manufacturing

    E-Print Network [OSTI]

    Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

  8. Industrial & Systems Engineering Areas of Engineering Interests

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

  9. Pollution Prevention and New Industrial Estates

    E-Print Network [OSTI]

    Heal, Kate

    1 Pollution Prevention and New Industrial Estates Chris Pittner Associate Director WSP 21 May 2012 POLLUTION PREVENTION AND NEW INDUSTRIAL ESTATES Pollution within Industrial Estates Legal Framework and Guidance Surface Water Management Project Examples #12;2 POLLUTION WITHIN INDUSTRIAL ESTATES Sources Poor

  10. Agricultural productivity and industrialization: A reformulation

    E-Print Network [OSTI]

    Bandyopadhyay, Antar

    Agricultural productivity and industrialization: A reformulation Debasis Mondal Sept 20, 2014 Abstract In this paper we examine the role of agricultural productivity on the process of industrialization industrialization by releasing labor from agriculture to industry. In fact, when agriculture is highly productive

  11. Advanced Manufacturing Office (Formerly Industrial Technologies Program)

    E-Print Network [OSTI]

    Advanced Manufacturing Office (Formerly Industrial Technologies Program) Leo Christodoulou Jamie August 11, 2011 #12;Background and Opportunity Background Industry accounts for 30% of energy consumption-value industries such as the renewable energy industry. Example materials include low-cost carbon fiber, low

  12. Construction of Generalized Connections

    E-Print Network [OSTI]

    Christian Fleischhack

    2006-01-02T23:59:59.000Z

    We present a construction method for mappings between generalized connections, comprising, e.g., the action of gauge transformations, diffeomorphisms and Weyl transformations. Moreover, criteria for continuity and measure preservation are stated.

  13. General Engineer (Chief Engineer)

    Broader source: Energy.gov [DOE]

    This position is located in the Office of the Manager. If selected for this position you will serve as a General Engineer (Chief Engineer) in the Office of the Manager for the Department of Energy,...

  14. General com Technology community

    E-Print Network [OSTI]

    Ferrara, Katherine W.

    Campus IT General com m unity Technology community ITsystem owners Campus Council for Information Technology (CCFIT) · ~30 members · Advisory evaluation and review role · Input from faculty, staff, students formal representation on steering team and subcommittees Technology Support Program · Technology support

  15. General relativity and experiment

    E-Print Network [OSTI]

    T. Damour

    1994-12-08T23:59:59.000Z

    The confrontation between Einstein's theory of gravitation and experiment is summarized. Although all current experimental data are compatible with general relativity, the importance of pursuing the quest for possible deviations from Einstein's theory is emphasized.

  16. Generalizing twisted gauge invariance

    SciTech Connect (OSTI)

    Duenas-Vidal, Alvaro; Vazquez-Mozo, Miguel A. [Departamento de Fisica Fundamental, Universidad de Salamanca, Plaza de la Merced s/n, E-37008 Salamanca (Spain)

    2009-05-01T23:59:59.000Z

    We discuss the twisting of gauge symmetry in noncommutative gauge theories and show how this can be generalized to a whole continuous family of twisted gauge invariances. The physical relevance of these twisted invariances is discussed.

  17. Translating Indian miniature paintings into a time-based medium

    E-Print Network [OSTI]

    Vaidya, Aradhana

    2008-10-10T23:59:59.000Z

    : Visualization Sciences iii ABSTRACT Translating Indian Miniature Paintings into a Time-based Medium. (May 2008) Aradhana Vaidya, B.Arch., Nagpur University, India Chair of Advisory Committee: Prof. Carol LaFayette The purpose of this research... ................................ 4 II VISUAL ANALYSIS OF MINIATURE PAINTINGS....................... 8 II.1 Characteristics of Indian miniature paintings..................... 8 II.2 Themes of Indian miniature paintings................................ 23 III...

  18. Dynamics of a Supernova Envelope in a Cloudy Interstellar Medium

    E-Print Network [OSTI]

    Korolev, V V; Kovalenko, I G; Shchekinov, Yu A

    2015-01-01T23:59:59.000Z

    The evolution of a supernova remnant in a cloudy medium as a function of the volume filling factor of the clouds is studied in a three-dimensional axially symmetrical model. The model includes the mixing of heavy elements (metals) ejected by the supernova and their contribution to radiative losses. The interaction of the supernova envelope with the cloudy phase of the interstellar medium leads to nonsimultaneous, and on average earlier, onsets of the radiative phase in different parts of the supernova envelope. Growth in the volume filling factor $f$ leads to a decrease in the time for the transition of the envelope to the radiative phase and a decrease in the envelope's mean radius, due to the increased energy losses by the envelope in the cloudy medium. When the development of hydrodynamical instabilities in the supernova envelope is efficient, the thermal energy falls as $E_t\\sim t^{-2.3}$, for the propagation of the supernova remnant through either a homogeneous or a cloudy medium. When the volume filling...

  19. The Solar Wind and Its Interaction with the Interstellar Medium

    E-Print Network [OSTI]

    Richardson, John

    outward through the solar system and interacts with the interstellar neutrals which slow and heat the wind. The arrows in the top panel show the flow of the solar wind and the interstellar J. D. Richardson CenterThe Solar Wind and Its Interaction with the Interstellar Medium John D. Richardson Abstract

  20. CARIBBEAN SEACRUISE IN LUXURY ABOARD CRYSTAL SERENITY BEST MEDIUM

    E-Print Network [OSTI]

    Spence, Harlan Ernest

    CARIBBEAN SEACRUISE IN LUXURY ABOARD CRYSTAL SERENITY WORLD'S BEST MEDIUM CRUISE LINE SIX and brilliantly colored colonial architecture -- this forms the backdrop for our Cruise the Caribbean Sea program at the Caribbean's many offerings, from picturesque lagoons to quaint towns to bustling beaches. Experience

  1. Mortar spectral element discretization of Darcy's equations in nonhomogeneous medium

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Mortar spectral element discretization of Darcy's equations in nonhomogeneous medium Mouna Daadaa Cedex 05 France. daadaa@ann.jussieu.fr 4 mai 2010 Abstract : We consider Darcy's equations. They turn out to be in good coherency with the theoretical results. R´esum´e : Les ´equations de Darcy mod

  2. Effective medium theory of permeation through ideal polymer networks

    E-Print Network [OSTI]

    Yong Wu

    2007-03-02T23:59:59.000Z

    The diffusion process through an ideal polymer network is studied by applying the effective medium theory (EMT) to a lattice-gas model. Polymers are modeled by random walks on the lattice bonds, across which molecules can hop with a certain probability. The steady state current of the system is calculated using the EMT and the results are compared to the simulations.

  3. Model of innovation transfer in small and medium enterprises (SME)

    E-Print Network [OSTI]

    Model of innovation transfer in small and medium enterprises (SME) Justyna Patalas-Maliszewska1 society, governments and entrepreneurs. In this paper the concept of innovation transfer in SME based of innovation transfer - based on correlations between innovation level in the enterprise sector SME

  4. CalHEAT Research and Market Transformation Roadmap for Medium

    E-Print Network [OSTI]

    California at Davis, University of

    - 8 Work Trucks Work Site Support Tractors - Short Haul/ Regional Class 2b/3 vans/pickup s Class 3 - 8CalHEAT Research and Market Transformation Roadmap for Medium and Heavy Duty Trucks Delivering President CALSTART #12;California Hybrid, Efficient and Advanced Truck Research Center What is Cal

  5. Distributed Medium Access Control for Next Generation CDMA Wireless Networks

    E-Print Network [OSTI]

    Zhuang, Weihua

    Distributed Medium Access Control for Next Generation CDMA Wireless Networks Hai Jiang, Princeton wireless networks are expected to have a simple infrastructure with distributed control. In this article, we consider a generic distributed network model for future wireless multi- media communications

  6. MEDIUM ACCESS CONTROL LAYER FOR UNDERWATER SENSOR NETWORKS*

    E-Print Network [OSTI]

    Chen, Min

    sensor networks, energy-efficient reliable MAC protocol, and slotted FAMA MAC protocol and low1 CHAPTER 1 MEDIUM ACCESS CONTROL LAYER FOR UNDERWATER SENSOR NETWORKS* Yanping Zhang* , Yang Xiao of Alabama Tuscaloosa, AL 35487-0290 USA E-mail: yangxiao@ieee.org + Dept. of Electrical and Computer

  7. FLAME SURFACE DENSITIES IN PREMIXED COMBUSTION AT MEDIUM TO HIGH

    E-Print Network [OSTI]

    Gülder, �mer L.

    premixed combustion diagrams. Small-scale transport of heat and species may be more important and chemistryFLAME SURFACE DENSITIES IN PREMIXED COMBUSTION AT MEDIUM TO HIGH TURBULENCE INTENSITIES O¨ MER L in turbulent premixed propane= air flames were determined experimentally. The instantaneous flame fronts were

  8. Industrial applications of electron accelerators

    E-Print Network [OSTI]

    Cleland, M R

    2006-01-01T23:59:59.000Z

    This paper addresses the industrial applications of electron accelerators for modifying the physical, chemical or biological properties of materials and commercial products by treatment with ionizing radiation. Many beneficial effects can be obtained with these methods, which are known as radiation processing. The earliest practical applications occurred during the 1950s, and the business of radiation processing has been expanding since that time. The most prevalent applications are the modification of many different plastic and rubber products and the sterilization of single-use medical devices. Emerging applications are the pasteurization and preservation of foods and the treatment of toxic industrial wastes. Industrial accelerators can now provide electron energies greater than 10 MeV and average beam powers as high as 700 kW. The availability of high-energy, high-power electron beams is stimulating interest in the use of X-rays (bremsstrahlung) as an alternative to gamma rays from radioactive nuclides.

  9. Analysis of fuel shares in the industrial sector

    SciTech Connect (OSTI)

    Roop, J.M.; Belzer, D.B.

    1986-06-01T23:59:59.000Z

    These studies describe how fuel shares have changed over time; determine what factors are important in promoting fuel share changes; and project fuel shares to the year 1995 in the industrial sector. A general characterization of changes in fuel shares of four fuel types - coal, natural gas, oil and electricity - for the industrial sector is as follows. Coal as a major fuel source declined rapidly from 1958 to the early 1970s, with oil and natural gas substituting for coal. Coal's share of total fuels stabilized after the oil price shock of 1972-1973, and increased after the 1979 price shock. In the period since 1973, most industries and the industrial sector as a whole appear to freely substitute natural gas for oil, and vice versa. Throughout the period 1958-1981, the share of electricity as a fuel increased. These observations are derived from analyzing the fuel share patterns of more than 20 industries over the 24-year period 1958 to 1981.

  10. Generalized Concatenated Quantum Codes

    E-Print Network [OSTI]

    Markus Grassl; Peter Shor; Graeme Smith; John Smolin; Bei Zeng

    2009-01-09T23:59:59.000Z

    We introduce the concept of generalized concatenated quantum codes. This generalized concatenation method provides a systematical way for constructing good quantum codes, both stabilizer codes and nonadditive codes. Using this method, we construct families of new single-error-correcting nonadditive quantum codes, in both binary and nonbinary cases, which not only outperform any stabilizer codes for finite block length, but also asymptotically achieve the quantum Hamming bound for large block length.

  11. Generalized Fusion Potentials

    E-Print Network [OSTI]

    Ofer Aharony

    1993-01-31T23:59:59.000Z

    Recently, DiFrancesco and Zuber have characterized the RCFTs which have a description in terms of a fusion potential in one variable, and proposed a generalized potential to describe other theories. In this note we give a simple criterion to determine when such a generalized description is possible. We also determine which RCFTs can be described by a fusion potential in more than one variable, finding that in fact all RCFTs can be described in such a way, as conjectured by Gepner.

  12. SymposiumandIndustrialAffiliatesProgramLightinAction Industrial Affiliates Program

    E-Print Network [OSTI]

    Van Stryland, Eric

    Session I Abstract: Recently Additive Manufacturing (AM) has been hailed as the "third industrial Platform for precision additive manufacturing largely depends on the speed and accuracy of in-situ optical Dean & Director, CREOL, UCF Symposium: Light in Action Session I. Manufacturing 9:15 Advances

  13. MIT and Life Sciences & Health Care Industries MIT Industry Brief

    E-Print Network [OSTI]

    Polz, Martin

    the interface between inorganic and organic materials for applications to energy, medicine, electronics have been used in applications as varied as solar cells, batteries, medical diagnostics and basic. The Institute for Soldier Nanotechnologies (ISN) is a team of MIT, U.S. Army, and industry partners working

  14. MIT and the Building/Construction Industries MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    devoted to improving the ability of companies to efficiently customize products and services in various in these areas. Please note that this is not a comprehensive summary of research being conducted at MIT in the topic areas listed above. MIT's Industrial Liaison Program (ILP) can bring the intellectual power of MIT

  15. Automating An Industrial Power Plant 

    E-Print Network [OSTI]

    Williams, D. R.; McCowen, R. R.

    1987-01-01T23:59:59.000Z

    and electricity requirements of the Component Works as well as all of the heat and a portion of the electricity needed by the adjacent John Deere Foundry. This paper describes the automation of an eXisting industrial power plant and tells how the project...AUTlliATING AN INDUSTRIAL POWER PLANT DAVID R. WILLIAMS, P.E. Energy Coordi?nator John Deere Component Works Waterloo, Iowa ABSTRACT The need for an upgrade of boiler and turbine controls in the 15 MW coal-fired cogeneration plant...

  16. Current Trends and Future Challenges in the Freight Railroad Industry: Balancing Private Industry Interests and the Public Welfare 

    E-Print Network [OSTI]

    Allen, Sarah; Kelson, Kendra; Migl, Hayden; Schmidt, Rodney; Shoemaker, David; Thomson, Heather

    2008-01-01T23:59:59.000Z

    Commission (ICC). The Staggers Act is based on the premise that while the railroad industry once constituted a monopoly, requiring ICC regulation , this is no longer true (Keeler). It is held that competition is generally adequate to constrain any... shippers and to limit rates from falling below variable costs. Maximum rates are identified through specified revenue to variable cost ratios but apply only if the railroad is earning an "adequate" return on investment (Keeler). In addition...

  17. NPDES Individual Permit for Industrial Facilities - Mail Merge...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WATER DISCHARGES ASSOCIATED WITH INDUSTRIAL ACTIVITY FROM FABRICATED METAL PRODUCTS INDUSTRY......44 I. CONTENTS OF PLAN. ......

  18. Certificate Industrial and Systems Engineering

    E-Print Network [OSTI]

    Su, Xiao

    Six Sigma Certificate Industrial and Systems Engineering San José State University September, 2008 #12;1 Lean Enterprise and Six Sigma Lean Enterprise about transforming the old mass production-to-cradle design, incorporating design for manufacturability, reproducibility, product lifecycle, etc. Six Sigma

  19. PETROLEUM INDUSTRY INFORMATION REPORTING ACT

    E-Print Network [OSTI]

    compliance. The Energy Commission uses the new refinery reports when creating the Weekly Fuels Watch Report refinery production and inventories. Monthly data of refinery inputs and outputs have a variety of regular use data by refineries to support analyses of total energy use by industry type within the state

  20. Electrified Separation Processes in Industry

    E-Print Network [OSTI]

    Appleby, A. J.

    1983-01-01T23:59:59.000Z

    distillation, in the chemical and related industries is very considerable. The majority of the energy used for these separations is thermal input in the form of the low heating-value of oil or gas. From the national viewpoint, it would be advantageous...

  1. Benchmarks for industrial energy efficiency

    SciTech Connect (OSTI)

    Amarnath, K.R. [Electric Power Research Inst., Palo Alto, CA (United States); Kumana, J.D. [Linnhoff March, Inc., Houston, TX (United States); Shah, J.V. [Electric Power Research Inst., Pittsburgh, PA (United States). Chemicals and Petroleum Center

    1996-12-31T23:59:59.000Z

    What are the standards for improving energy efficiency for industries such as petroleum refining, chemicals, and glass manufacture? How can different industries in emerging markets and developing accelerate the pace of improvements? This paper discusses several case studies and experiences relating to this subject emphasizing the use of energy efficiency benchmarks. Two important benchmarks are discussed. The first is based on a track record of outstanding performers in the related industry segment; the second benchmark is based on site specific factors. Using energy use reduction targets or benchmarks, projects have been implemented in Mexico, Poland, India, Venezuela, Brazil, China, Thailand, Malaysia, Republic of South Africa and Russia. Improvements identified through these projects include a variety of recommendations. The use of oxy-fuel and electric furnaces in the glass industry in Poland; reconfiguration of process heat recovery systems for refineries in China, Malaysia, and Russia; recycling and reuse of process wastewater in Republic of South Africa; cogeneration plant in Venezuela. The paper will discuss three case studies of efforts undertaken in emerging market countries to improve energy efficiency.

  2. Optimization of Industrial Refrigeration Systems

    E-Print Network [OSTI]

    Flack, P. J.; Sharp, M. K.; Case, M. E.; Gregory, R. W.; Case, P. L.

    A computer program designed to optimize the size of an evaporative condenser in a two-stage industrial refrigeration plant was created. The program sizes both the high-stage and low-stage compressors and an evaporative condenser. Once the initial...

  3. Shale Play Industry Transportation Challenges,

    E-Print Network [OSTI]

    Minnesota, University of

    ­ High volume commodi-es flows in and out of shale plays · Sand In....Oil in excess of 50 MMT/Yr. · Life of current Shale Oil & Gas explora-on trend ­ 2012) #12;Shale Play Oil Industry A Look at the Baaken · 2-3 Unit Trains

  4. Differential effective medium modeling of rock elastic moduli with critical porosity constraints

    SciTech Connect (OSTI)

    Mukerji, T.; Mavko, G. [Stanford Univ. CA (United States)] [Stanford Univ. CA (United States); Berryman, J.; Berge, P. [Lawrence Livermore National Lab., CA (United States)] [Lawrence Livermore National Lab., CA (United States)

    1995-03-01T23:59:59.000Z

    Rocks generally have a percolation porosity at which they lose rigidity and fall apart. Percolation behaviour is a purely geometrical property, independent of any physical properties, and is a powerful constraint on any valid velocity-porosity relation. The authors show how the conventional Differential Effective Medium (DEM) theory can be modified to incorporate percolation of elastic moduli in rocks by taking the material at the critical porosity as one of the constituents of a two-phase composite. Any desired percolation porosity can be specified as an input. In contrast, the conventional DEM model always predicts percolation at a porosity of either 0 or 100 percent. Most sedimentary rocks however have intermediate percolation porosities and are therefore not well represented by the conventional theory. The modified DEM model incorporates percolation behavior, and at the same time is always consistent with the Hashin-Shtrikman bounds. The predictions compare favorably with laboratory sandstone data. 24 refs., 3 figs.

  5. Detection of a branched alkyl molecule in the interstellar medium: iso-propyl cyanide

    E-Print Network [OSTI]

    Belloche, Arnaud; Müller, Holger S P; Menten, Karl M

    2014-01-01T23:59:59.000Z

    The largest non-cyclic molecules detected in the interstellar medium (ISM) are organic with a straight-chain carbon backbone. We report an interstellar detection of a branched alkyl molecule, iso-propyl cyanide (i-C3H7CN), with an abundance 0.4 times that of its straight-chain structural isomer. This detection suggests that branched carbon-chain molecules may be generally abundant in the ISM. Our astrochemical model indicates that both isomers are produced within or upon dust grain ice mantles through the addition of molecular radicals, albeit via differing reaction pathways. The production of iso-propyl cyanide appears to require the addition of a functional group to a non-terminal carbon in the chain. Its detection therefore bodes well for the presence in the ISM of amino acids, for which such side-chain structure is a key characteristic.

  6. Review of U.S. ESCO industry market trends: An empirical analysis of project data

    SciTech Connect (OSTI)

    Goldman, Charles A.; Hopper, Nicole C.; Osborn, Julie G.; Singer, Terry E.

    2003-03-01T23:59:59.000Z

    This article summarizes a comprehensive empirical analysis of U.S. Energy Service Company (ESCO) industry trends and performance. We employ two parallel analytical approaches: a comprehensive survey of firms to estimate total industry size and a database of {approx}1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US $2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m2/year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ESCOs have proven resilient in the face of restructuring and will probably shift toward selling ''energy solutions,'' with energy efficiency part of a package. We conclude that a private sector energy-efficiency services industry that targets large commercial and industrial customers is viable and self-sustaining with appropriate policy support both financial and non-financial.

  7. Market Making in the PC Industry

    E-Print Network [OSTI]

    Dedrick, Jason; Kraemer, Kenneth L

    2007-01-01T23:59:59.000Z

    market refers to enterprise, SME, governments education andchannel for consumer and SME (small and medium enterprise)with ODMs/ component suppliers SME, consumer markets Market

  8. Photovoltaic industry progress through 1984

    SciTech Connect (OSTI)

    Watts, R.L.; Smith, S.A.; Dirks, J.A.

    1985-04-01T23:59:59.000Z

    The growth of the US photovoltaics (PV) industry over the past decade has been impressive. First designed to provide power for satellites using high-cost production techniques, PV is now the economical choice in many remote terrestrial applications. The remarkable growth of PV in terms of quality of cells and modules, production techniques, and system design, was initiated by a cooperative effort of the US Government and the domestic PV manufacturers. European and Japanese firms entered the PV industry later, but are also growing rapidy. The Europeans continue to supply PV systems for village electrification and water pumping to many Third World countries. The Japanese have been developing the amorphous silicon (A-Si) technology by expanding its use in consumer goods. The world PV industry saw dramatic changes in industry ownership and in the emphasis on developing new and improved technology during 1984. The objective of this report is to present information on the developments of the world PV industry and focuses on developments occurring in 1984. Information is presented on a regional basis (US, Europe, Japan, other) to avoid disclosing company-confidential data. All information was gleaned from several sources, including a review of the technical literature and direct contacts with PV manufacturers. Prior to publishing the regional totals, all numbers were compared with those of other sources. The information contained in this report is prepared for use by the Department of Energy for their use in long-term R and D planning. However, this information should also be of interest by PV manufacturers and to those who may be contemplating entering the PV market. PV shipments for 1984, government supports for PV, and various PV market sectors are discussed.

  9. Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April, 2006 (draft) 1 MEASURING INDUSTRIAL ENERGY SAVINGS

    E-Print Network [OSTI]

    Kissock, Kelly

    Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April, 2006 (draft) 1 MEASURING INDUSTRIAL ENERGY SAVINGS Kelly Kissock and Carl Eger Department of Mechanical and Aerospace a general method for measuring industrial energy savings and demonstrates the method using a case study from

  10. Noncommutative General Relativity

    E-Print Network [OSTI]

    Xavier Calmet; Archil Kobakhidze

    2005-06-27T23:59:59.000Z

    We define a theory of noncommutative general relativity for canonical noncommutative spaces. We find a subclass of general coordinate transformations acting on canonical noncommutative spacetimes to be volume-preserving transformations. Local Lorentz invariance is treated as a gauge theory with the spin connection field taken in the so(3,1) enveloping algebra. The resulting theory appears to be a noncommutative extension of the unimodular theory of gravitation. We compute the leading order noncommutative correction to the action and derive the noncommutative correction to the equations of motion of the weak gravitation field.

  11. Noncommutative general relativity

    SciTech Connect (OSTI)

    Calmet, Xavier [Service de Physique Theorique, Universite Libre de Bruxelles, CP225, Boulevard du Triomphe (Campus plaine), B-1050 Brussels (Belgium); Kobakhidze, Archil [Department of Physics and Astronomy, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States); Andronikashvili Institute of Physics, 0177 Tbilisi, Georgia (United States)

    2005-08-15T23:59:59.000Z

    We define a theory of noncommutative general relativity for canonical noncommutative spaces. We find a subclass of general coordinate transformations acting on canonical noncommutative spacetimes to be volume-preserving transformations. Local Lorentz invariance is treated as a gauge theory with the spin connection field taken in the so(3,1) enveloping algebra. The resulting theory appears to be a noncommutative extension of the unimodular theory of gravitation. We compute the leading order noncommutative correction to the action and derive the noncommutative correction to the equations of motion of the weak gravitation field.

  12. 8Li General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032) -Less isNFebruaryOctober 2, AlgeriaQ1 Q2 Q3 U . SHe GeneralLi

  13. The photovoltaic manufacturing technology project: A government/industry partnership

    SciTech Connect (OSTI)

    Mitchell, R.L.; Witt, C.E.; Mooney, G.D.

    1991-12-01T23:59:59.000Z

    The Photovoltaic Manufacturing Technology (PVMaT) project is a government/industry photovoltaic manufacturing research and development (R&D) project composed of partnerships between the federal government (through the US Department of Energy) and members of the US photovoltaic (PV) industry. It is designed to assist the US PV industry in improving manufacturing processes, accelerating manufacturing cost reductions for PV modules, increasing commercial product performance, and generally laying the groundwork for a substantial scale-up of US-based PV manufacturing plant capabilities. The project is being carried out in three separate phases, each focused on a specific approach to solving the problems identified by the industrial participants. These participants are selected through competitive procurements. Furthermore, the PVMaT project has been specifically structured to ensure that these PV manufacturing R&D subcontract awards are selected with no intention of either directing funding toward specific PV technologies (e.g., amorphous silicon, polycrystalline thin films, etc.), or spreading the awards among a number of technologies (e.g., one subcontract in each area). Each associated subcontract under any phase of this project is, and will continue to be, selected for funding on its own technical and cost merits. Phase 1, the problem identification phase, was completed early in 1991. Phase 2 is now under way. This is the solution phase of the project and addresses problems of specific manufacturers. The envisioned subcontracts under Phase 2 may be up to three years in duration and will be highly cost-shared between the US government and US industrial participants. Phase 3, is also under way. General issues related to PV module development will be studied through various teaming arrangements. 25 refs.

  14. industrial & systems (ISE) Industrial and Systems Engineers use engineering and business principles

    E-Print Network [OSTI]

    Rohs, Remo

    to linear programming; transportation and assignment problems; dynamic program- ming; deterministic to programing, software and multimedia. USC's undergraduate ISE curriculum prepares students for industry. Programs Available · Industrial and Systems Engineering Bachelor of Science 129 units · Industrial

  15. Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry

    E-Print Network [OSTI]

    Sheridan, Jennifer

    1 Report Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry Thursday, October 6, 2011 Room 221 · Fluno Center · 601 University Avenue · Madison · WI industry through supply chain management, public policies and innovative technologies to help

  16. Energy Analysis and Diagnostics Data Analysis From Industrial Energy Assessments for Manufacturing Industries

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Plummer, R. W.; Srinath, S.; Meffe, C. M.; Ipe, J. J.; Veena, R.

    . The data shows the types of industries in our geographical area which have benefited from the industrial assessments and outlines the relationships between these industry types and variables such as energy consumption, types of recommendations, sales, plant...

  17. Continuum Electrodynamics of a Piecewise-Homogeneous Linear Medium

    E-Print Network [OSTI]

    Crenshaw, Michael E

    2015-01-01T23:59:59.000Z

    The energy--momentum tensor and the tensor continuity equation serve as the conservation laws of energy, linear momentum, and angular momentum for a continuous flow. Previously, we derived equations of motion for macroscopic electromagnetic fields in a homogeneous linear dielectric medium that is draped with a gradient-index antireflection coating (J. Math Phys. 55, 042901 (2014) ). These results are consistent with the electromagnetic tensor continuity equation in the limit that reflections and the accompanying surface forces are negligible thereby satisfying the condition of an unimpeded flow in a thermodynamically closed system. Here, we take the next step and derive equations of motion for the macroscopic fields in the limiting case of a piecewise-homogeneous simple linear dielectric medium. The presence of radiation surface forces on the interface between two different homogeneous linear materials means that the energy--momentum formalism must be modified to treat separate homogeneous media in which the ...

  18. Probabilistic picture of in-medium jet evolution

    E-Print Network [OSTI]

    Yacine Mehtar-Tani

    2014-04-29T23:59:59.000Z

    We briefly discuss the recently developed probabilistic picture for in-medium jet evolution that is driven by independent multiple scatterings and branchings. These are controlled by the jet quenching parameter $\\hat q$. In this framework, large radiative corrections to $p_\\perp$-broadening of partons in the jet, enhanced by a double logarithm (DL) of the medium size $L$, are recovered. We argue that these non-local corrections are universal and can be reabsorbed in a renormalization of the jet quenching parameter without spoiling the probabilistic picture. As a consequence, we find that for large media, the mean radiative energy loss result scales as $L^{2+\\gamma}$, where the anomalous dimension $\\gamma=2\\sqrt{\\alpha_sN_c/\\pi}$.

  19. The Baryon Catastrophe and the multiphase intracluster medium

    E-Print Network [OSTI]

    K. F. Gunn; P. A. Thomas

    1995-10-17T23:59:59.000Z

    We review the theories and observations which together have led to the concept of the Baryon Catastrophe: observations of the baryon fraction on the scale of clusters of galaxies appear to be at least three times as high as the universal baryon fraction predicted by the theory of primordial nucleosynthesis in a flat, $\\Omega_0 = 1$, universe. We investigate whether this discrepancy could be eliminated by treating the intracluster gas as a multiphase medium, and find that this treatment both lowers the calculated mass of gas in a cluster and increases the inferred gravitational potential. These combined effects can reduce the calculated baryon fraction by between a quarter and a half: the precise amount depends upon the volume fraction distribution of density phases in the gas but is independent of the temperature profile across the cluster. Thus moving to a multiphase intracluster medium cannot resolve the Baryon Catastrophe by itself; other possible causes and explanations are discussed.

  20. An Improved Treatment of Cosmological Intergalactic Medium Evolution

    E-Print Network [OSTI]

    Manrique, Alberto

    2015-01-01T23:59:59.000Z

    The modeling of galaxy formation and reionization, two central issues of modern cosmology, relies on the accurate follow-up of the intergalactic medium (IGM). Unfortunately, owing to the complex nature of this medium, the differential equations governing its ionization state and temperature are only approximate. In this paper, we improve these master equations. We derive new expression for the distinct composite inhomogeneous IGM phases, including all relevant ionizing/recombining and cooling/heating mechanisms, taking into account inflows/outflows into/from halos, and using more accurate recombination coefficients. Furthermore, to better compute the source functions in the equations we provide an analytic procedure for calculating the halo mass function in ionized environments, accounting for the bias due to the ionization state of their environment. Such an improved treatment of IGM evolution is part of a complete realistic model of galaxy formation presented elsewhere.

  1. Charmonium in a hot medium: melting vs absorption

    E-Print Network [OSTI]

    B. Z. Kopeliovich; I. K. Potashnikova; Ivan Schmidt; M. Siddikov

    2014-08-11T23:59:59.000Z

    A charmonium produced in heavy ion collisions at RHIC and LHC propagates through a dense co-moving matter with a rather high relative momentum, =4-10GeV^2. In spite of Debye screening of the binding potential, the charmonium survives with a substantial probability, even if the c-cbar potential is completely screened in the hot environment. In addition, the color-exchange interaction with the medium is another important source of charmonium suppression. Attenuation in a hot medium caused by both effects is evaluated by means of the path integral technique, which requires ability of boosting the binding potential to a moving reference frame. This problem is solved in the approximation of small intrinsic velocities of the charmed quarks.

  2. Electrochemical cells for medium- and large-scale energy storage

    SciTech Connect (OSTI)

    Wang, Wei; Wei, Xiaoliang; Choi, Daiwon; Lu, Xiaochuan; Yang, G.; Sun, C.

    2014-12-12T23:59:59.000Z

    This is one of the chapters in the book titled “Advances in batteries for large- and medium-scale energy storage: Applications in power systems and electric vehicles” that will be published by the Woodhead Publishing Limited. The chapter discusses the basic electrochemical fundamentals of electrochemical energy storage devices with a focus on the rechargeable batteries. Several practical secondary battery systems are also discussed as examples

  3. RF-MEMS Switched Varactors for Medium Power Applications

    E-Print Network [OSTI]

    Maury, F; Crunteanu, A; Conseil, F; Blondy, P

    2008-01-01T23:59:59.000Z

    In RF (Radio Frequency) domain, one of the limitations of using MEMS (Micro Electromechanical Systems) switching devices for medium power applications is RF power. Failure phenomena appear even for 500 mW. A design of MEMS switched capacitors with an enhanced topology is presented in this paper to prevent it. This kind of device and its promising performances will serve to fabricate a MEMS based phase shifter able to work under several watts.

  4. Diffusion of hidden charm mesons in hadronic medium

    E-Print Network [OSTI]

    Sukanya Mitra; Sabyasachi Ghosh; Santosh K. Das; Sourav Sarkar; Jan-e Alam

    2014-09-16T23:59:59.000Z

    The drag and diffusion coefficients of a hot hadronic medium have been evaluated by using hidden charm mesons as probes. The matrix elements for the evaluation of these coefficients are calculated using an effective theory as well as from scattering lengths. Although the transport coefficients show a significant rise with temperature its effects on the suppression of $J/\\psi$ in hadronic matter is not significant.

  5. Enrichment of the Intergalactic Medium by the Milky Way Subgroup

    E-Print Network [OSTI]

    Leticia Carigi

    2001-08-27T23:59:59.000Z

    I study the effect of the galaxies of the Milky Way subgroup on the chemical enrichment of the diffuse gas within the Local Group. The preferred model predicts that the present-day intergalactic medium mass is 1/22 of the initial baryonic mass and its metallicity is 1/20 $Z_\\odot$. Nearly 80 % of intergalactic metals were produced in the Galactic bulge.

  6. Metal Enrichment in the Intra-Cluster Medium

    E-Print Network [OSTI]

    Sabine Schindler

    2006-11-20T23:59:59.000Z

    The enrichment of the Intra-Cluster Medium (ICM) with heavy elements is reviewed. There is now good observational evidence for enrichment including abundance ratios and metallicity distributions. Various processes involved in the enrichment process -- ram-pressure stripping, galactic winds, galaxy-galaxy interactions, AGN outflows and intra-cluster supernovae -- are described. Simulations of the ICM evolution taking into account metal enrichment are presented.

  7. General Syllabus Physics 45100

    E-Print Network [OSTI]

    Lombardi, John R.

    General Syllabus Physics 45100 Thermodynamics and Statistical Physics Designation: Undergraduate Catalog description: 45100: Thermodynamics and Statistical Physics Temperature; equation of state; work and statistical mechanics; low-temperature physics; the Third Law. 3 HR./Wk.; 3 CR. Prerequisites: Physics 35100

  8. DRILLING MACHINES GENERAL INFORMATION

    E-Print Network [OSTI]

    Gellman, Andrew J.

    TC 9-524 Chapter 4 DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling machines. A drilling machine comes in many shapes and sizes, from small hand-held power drills to bench mounted and finally floor-mounted models. They can perform operations

  9. Generalization of Conformal Transformations

    E-Print Network [OSTI]

    G. I. Garas'ko

    2005-09-19T23:59:59.000Z

    Conformal transformations of a Euclidean (complex) plane have some kind of completeness (sufficiency) for the solution of many mathematical and physical-mathematical problems formulated on this plane. There is no such completeness in the case of Euclidean, pseudo-Euclidean and polynumber spaces of dimension greater than two. In the present paper we show that using the concepts of analogical geometries allows us to generalize conformal transformations not only to the case of Euclidean or pseudo-Euclidean spaces, but also to the case of Finsler spaces, analogous to the spaces of affine connectedness. Examples of such transformations in the case of complex and hypercomplex numbers H_4 are presented. In the general case such transformations form a group of transitions, the elements of which can be viewed as transitions between projective Euclidean geometries of a distinguished class fixed by the choice of metric geometry admitting affine coordinates. The correlation between functions realizing generalized conformal transformations and generalized analytical functions can appear to be productive for the solution of fundamental problems in theoretical and mathematical physics.

  10. GENERAL CIRCULATION Energy Cycle

    E-Print Network [OSTI]

    Grotjahn, Richard

    process. PE is useful for global energy balance. Solar radiant energy does not reach the Earth equally everywhere. On average, the tropics receive and absorb far more solar energy annually than the polar regionsGENERAL CIRCULATION Contents Energy Cycle Mean Characteristics Momentum Budget Overview Energy

  11. Optimization Under Generalized Uncertainty

    E-Print Network [OSTI]

    Lodwick, Weldon

    11 Optimization Under Generalized Uncertainty Optimization Modeling Math 4794/5794: Spring 2013 Weldon A. Lodwick Weldon.Lodwick@ucdenver.edu 2/14/2013 Optimization Modeling - Spring 2013 #12 in the context of optimization problems. The theoretical frame-work for these notes is interval analysis. From

  12. Optical Anisotropy of Schwarzschild Metric within Equivalent Medium Framework

    E-Print Network [OSTI]

    Sina Khorasani; Bizhan Rashidian

    2009-12-16T23:59:59.000Z

    It is has been long known that the curved space in the presence of gravitation can be described as a non-homogeneous anisotropic medium in flat geometry with different constitutive equations. In this article, we show that the eigenpolarizations of such medium can be exactly solved, leading to a pseudo-isotropic description of curved vacuum with two refractive index eigenvalues having opposite signs, which correspond to forward and backward travel in time. We conclude that for a rotating universe, time-reversal symmetry is broken. We also demonstrate the applicability of this method to Schwarzschild metric and derive exact forms of refractive index. We derive the subtle optical anisotropy of space around a spherically symmetric, non-rotating and uncharged blackhole in the form of an elegant closed form expression, and show that the refractive index in such a pseudo-isotropic system would be a function of coordinates as well as the direction of propagation. Corrections arising from such anisotropy in the bending of light are shown and a simplified system of equations for ray-tracing in the equivalent medium of Schwarzschild metric is found.

  13. Polyacrylamide medium for the electrophoretic separation of biomolecules

    DOE Patents [OSTI]

    Madabhushi, Ramakrishna S.; Gammon, Stuart A.

    2003-11-11T23:59:59.000Z

    A polyacryalmide medium for the electrophoretic separation of biomolecules. The polyacryalmide medium comprises high molecular weight polyacrylamides (PAAm) having a viscosity average molecular weight (M.sub.v) of about 675-725 kDa were synthesized by conventional red-ox polymerization technique. Using this separation medium, capillary electrophoresis of BigDye DNA sequencing standard was performed. A single base resolution of .about.725 bases was achieved in .about.60 minute in a non-covalently coated capillary of 50 .mu.m i.d., 40 cm effective length, and a filed of 160 V/cm at 40.degree. C. The resolution achieved with this formulation to separate DNA under identical conditions is much superior (725 bases vs. 625 bases) and faster (60 min. vs. 75 min.) to the commercially available PAAm, such as supplied by Amersham. The formulation method employed here to synthesize PAAm is straight-forward, simple and does not require cumbersome methods such as emulsion polymerizaiton in order to achieve very high molecular weights. Also, the formulation here does not require separation of PAAm from the reaction mixture prior to reconstituting the polymer to a final concentration. Furthermore, the formulation here is prepared from a single average mol. wt. PAAm as opposed to the mixture of two different average mo. wt. PAAm previously required to achieve high resolution.

  14. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    A.T, 2001: Prospects for biogas harvesting at Sungunn WongseRenewables Biomass, Biogas, PV, Wind turbines, Hydropowermill, fluidized bed kiln Biogas, Biomass Cullet preheating

  15. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Note: Biomass energy included Source: Price et al. , 2006.Note: Biomass energy included Source: Price et al. (2006).

  16. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    incineration and the demand for fossil fuels. In Japan, useincineration and the demand for fossil fuels. In Brazil,

  17. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    competitiveness in the EU emissions trading scheme: Optionson NO x and CO 2 emissions trading. Emissions Trader -Economy. DTI, 2005: EU Emissions trading scheme: Benchmark

  18. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    driven systems; high efficiency boilers and process heaters;aims to develop boilers with an efficiency of 94%. However,much lower. Efficiency measures exist for both boilers and

  19. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    14 pp. IEA, 2006c: World Energy Outlook 2006. Internationalan extrapolation of its World Energy Outlook 2005 ReferenceCO 2 gases The IEA’s World Energy Outlook 2006 (IEA, 2006c)

  20. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    about 1.2% of world energy consumption and is responsible7.2: Design energy consumption trends in world ammonia

  1. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    for carbon capture and storage technologies. Annual Reviewof carbon capture and storage (CCS) technology offers aCarbon dioxide Capture and Storage (CCS), including oxy-fuel combustion21 Process-specific technologies

  2. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    20 about 20 about 20 CCS Potential (tCO 2 /t) Mitigationstream, which is a potential candidate for CCS technology.reduces the potential for applying CCS technology. Chlorine

  3. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Schleich, J. , 2004: Do energy audits help reduce barriersof organizational barriers. Energy audit and managementa; US EPA, n.d. ). Energy Audits and Management Systems.

  4. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    energy-efficiency investments can be planned and implemented. There are also voluntary agreements covering process emissions in Australia,

  5. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Emission reduction at Engen refinery in South Durban. Paperenergy consumed in refineries and other energy conversionCement Membrane separation Refinery gas Natural gas Bio-

  6. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Air bottoming cycle Black liquor gasification combined cycleCEPI, 2001), and that use continues to grow. Black liquorgasification: Black liquor is the residue from chemical

  7. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    2002: Profiles in SMEs and SME Issues, 1990-2000. Asia-Energy management practices in SME- Case study of bakery incountries. Integrating SME development strategy into the

  8. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Europe Former Soviet Union Developing Asia Latin America Sub-Saharan Africa Middle East & North Africa World B2 Scenario Note: Biomass

  9. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    and fuel used in the primary smelter. PFC emission includedto current state-of-the art smelter electricity use and 50%commonly been connected to smelter retrofit, conversion, or

  10. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    2006: Supply-side energy efficiency and fossil fuel switch.use, from non-energy uses of fossil fuels and from non-emissions from non-energy uses of fossil fuels and from non-

  11. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    7.2: Design energy consumption trends in world ammoniagoes up: Recent trends in China’s Energy Consumption. Energy

  12. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    communication to the UN Framework Convention on Climate Change.Communications - Report by the Secretariat. UN Framework Convention on Climate Change.

  13. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Energy efficiency and energy awareness in Botswana; ESI,attitudes towards and awareness of energy efficiency; •limited awareness of the availability of energy-saving and

  14. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    both emis- sions from incineration and the demand for fossilyr (Okazaki et al. , 2004). Incineration of wastes (e.g. ,by reducing emissions from incineration and the demand for

  15. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Eidt, B. , 2004: Cogeneration opportunities - Global EnergyP.R.K. , 2003: Sugar cogeneration for power challenges andnewsletter in sugar and cogeneration. STAPPA/ALAPCO, 1999:

  16. Industrial

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFP »summerlectures [ICO]default Sign In About |

  17. Industrial

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook link to04948 Site Map6871

  18. Industrial

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News link to facebook link to04948 Site

  19. Tools to Boost Steam System Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program steam software tools can help industrial plants identify steam system improvements to save energy and money.

  20. Industrial Sector Energy Demand: Revisions for Non-Energy-Intensive Manufacturing (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01T23:59:59.000Z

    For the industrial sector, the Energy Information Administration's (EIA) analysis and projection efforts generally have focused on the energy-intensive industriesfood, bulk chemicals, refining, glass, cement, steel, and aluminumwhere energy cost averages 4.8% of annual operating cost. Detailed process flows and energy intensity indicators have been developed for narrowly defined industry groups in the energy-intensive manufacturing sector. The non-energy-intensive manufacturing industries, where energy cost averages 1.9% of annual operating cost, previously have received somewhat less attention, however. In Annual Energy Outlook 2006 (AEO), energy demand projections were provided for two broadly aggregated industry groups in the non-energy-intensive manufacturing sector: metal-based durables and other non-energy-intensive. In the AEO2006 projections, the two groups accounted for more than 50% of the projected increase in industrial natural gas consumption from 2004 to 2030.

  1. The Industry Viewpoint Mike Shepherd

    E-Print Network [OSTI]

    Leeds, University of

    1 UK WIR MTU2 The Industry Viewpoint Mike Shepherd Client Manager ­ Distribution and Streetworks UK in Hampstead 1851 #12;3 UK WIR Where are we now? UK WIR MAINS AND SEWERS #12;4 UK WIR FIBRE OPTICS UK WIR GAS companies dig 500,000 holes/yr · Gas, electricity and telecoms dig 250,000/yr each · Many jobs take longer

  2. Electrotechnologies and Industrial Pollution Control 

    E-Print Network [OSTI]

    Schmidt, P. S.

    1990-01-01T23:59:59.000Z

    content, and nonferrfms industrial efficiency and productivity has been cited in reverb melting furnaces produce high percentage~ of a number of publications [1-4]; these benefits continue metal oxides. These pollutants are greatly reduced in to drive... or in furnaces are capable of heat treating metals in vacu~m, development and which could be of value to low oxygen, or inert atmospheres, and operate witH no manufacturers in meeting productivity and exhaust gases. Thus, metal oxide formationl...

  3. Regulation XVI: GENERAL UNIVERSITY REGULATIONS

    E-Print Network [OSTI]

    Regulation XVI: GENERAL UNIVERSITY REGULATIONS APPLICATION AND INTERPRETATION 1. Unless stated otherwise, these and the following Regulations apply to students in all Faculties, including the International Faculty: General Regulations for First Degrees; General Regulations for Higher Degrees

  4. Biomonitoring for the photovoltaics industry

    SciTech Connect (OSTI)

    Bernholc, N.M.; Moskowitz, P.D.

    1995-07-01T23:59:59.000Z

    Biomonitoring often is used as a method for estimating the dose to an individual. Therefore, a parameter of measurement, or biomarkers must be identified. The purpose of this paper is to give an overview of biomonitoring protocols for metals used in the photovoltaics industry. Special attention is given to areas that often are skimmed over, to gain insights into some of the problems that may arise when these tasks are carried out. Biological monitoring can be used to determine current human exposures to chemicals, as well as to detect past exposures, and the effects that these exposures may have on human health. It is used in conjunction with environmental monitoring to describe more completely worker`s exposures to, and absorption of, chemicals in the workplace. Biological specimens (e.g., blood, hair or urine) are analyzed for chemical agents, metabolites, or for some specific effect on the person (Lowry 1994). Biomonitoring can assess a workers exposure to industrial chemicals by all routes including skin absorption and ingestion. Although the methodology still is in its infancy, in cases where the procedures have been developed, it can be an invaluable component of an ongoing program of industrial hygiene monitoring. Like any technology, there are limitations to its effectiveness because of a lack of knowledge, contamination of specimens, and the introduction of errors.

  5. Energy Matters: Industrial Energy Efficiency | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Dr. Kathleen Hogan to Host Live Chat on Industrial Energy Efficiency LiveChat Wed, 1116, 2 pm ET: Industrial Energy Efficiency VIDEO: Who Was the Better Inventor, Tesla or Edison?...

  6. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01T23:59:59.000Z

    Voluntary Agreements for Energy Efficiency or GHG EmissionsACEEE Summer Study on Energy Efficiency in Industry, WestStandard for Industrial Energy Efficiency A. McKane 1 , R.

  7. Energy Programs of the Texas Industrial Commission 

    E-Print Network [OSTI]

    Heare, J.; dePlante, L. E.

    1979-01-01T23:59:59.000Z

    workshops and seminars; an annual Industrial Energy Technology Conference; the coordination of a university program for the training of industrial energy auditors; and organizational assistance in the establishment of regional energy conservation groups...

  8. 2008 Industrial Technologies Market Report, May 2009

    SciTech Connect (OSTI)

    Energetics; DOE

    2009-07-01T23:59:59.000Z

    The industrial sector is a critical component of the U.S. economy, providing an array of consumer, transportation, and national defense-related goods we rely on every day. Unlike many other economic sectors, however, the industrial sector must compete globally for raw materials, production, and sales. Though our homes, stores, hospitals, and vehicles are located within our borders, elements of our goods-producing industries could potentially be moved offshore. Keeping U.S. industry competitive is essential to maintaining and growing the U.S. economy. This report begins with an overview of trends in industrial sector energy use. The next section of the report focuses on some of the largest and most energy-intensive industrial subsectors. The report also highlights several emerging technologies that could transform key segments of industry. Finally, the report presents policies, incentives, and drivers that can influence the competitiveness of U.S. industrial firms.

  9. The State of the Industrial Compressor Market

    E-Print Network [OSTI]

    Perry, W.

    The industrial compressor industry in the United States has been operating in a textbook example of a mature market. No truly new compressor technology has been introduced in the past thirty years and there is none on the horizon. Competitive...

  10. Qualified Target Industry Tax Refund (Florida)

    Broader source: Energy.gov [DOE]

    The Qualified Target Industry Tax Refund incentive is available for companies that create high wage jobs in targeted high value-added industries. The incentive refunds up to $3,000 per new full...

  11. New or Expanding Industries Tax Credit (Montana)

    Broader source: Energy.gov [DOE]

    Under the New or Expanding Industries Tax Credit, property used by certain new or expanding industries is eligible for reduced taxable valuation (up to 50% of their taxable value for the first 5...

  12. A New Approach to Industrial Air Conditioning

    E-Print Network [OSTI]

    Gravenstreter, T.

    1982-01-01T23:59:59.000Z

    -dryer Systems Division, has marketed industrial drying machinery. These heat reactivated dryers can handle latent loads in industrial air conditioning systems. Through waste heat conservation, air conditioning costs can be reduced 25 to 50%, with applications...

  13. FINLAND SOURCES 2007 -Forest industry production Authorities

    E-Print Network [OSTI]

    FINLAND SOURCES 2007 - Forest industry production Print Home Finland Government Authorities Local » Turnover » Profit » Energy Year 2006 » Shipping Business services Infrastructure Economy Education strategy of the EU's Forest-Based Industries Technology Platform provides a good basis for preparing

  14. Energy Programs of the Texas Industrial Commission

    E-Print Network [OSTI]

    Heare, J.; dePlante, L. E.

    1979-01-01T23:59:59.000Z

    The objectives of the Industrial Energy Conservation Program are to assist Texas industry in using energy more efficiently through seminars, workshops, technical information exchange and other supportive programs with the goal of conserving at least...

  15. UNDERGRADUATE DEGREES Industrial and Systems Engineering

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    control, information technologies, and electronics and solar power assembly and reliability. Students solving. Students delve into systems modeling and simulation, systems design and the simplificationUNDERGRADUATE DEGREES Industrial and Systems Engineering The Bachelor's Degree in Industrial

  16. Partnering with Industry to Develop Advanced Biofuels

    Broader source: Energy.gov [DOE]

    Breakout Session IA—Conversion Technologies I: Industrial Perspectives on Pathways to Advanced Biofuels Partnering with Industry to Develop Advanced Biofuels David C. Carroll, President and Chief Executive Officer, Gas Technology Institute

  17. Daylighting Application and Effectiveness in Industrial Facilities 

    E-Print Network [OSTI]

    McCowan, B.; Birleanu, D.

    2005-01-01T23:59:59.000Z

    artificial lighting became available, most older industrial buildings had their daylighting features boarded over. With modern glazing systems and sophisticated designs that minimize glare issues, daylighting for industrial buildings is making a strong...

  18. Practical Procedures for Auditing Industrial Boiler Plants

    E-Print Network [OSTI]

    O'Neil, J. P.

    1980-01-01T23:59:59.000Z

    Industrial boiler plants are an area of opportunity in virtually every industry to save energy and reduce costs by using relatively simple, inexpensive auditing procedures. An energy audit consists of inspection, measurement, analysis...

  19. Scottish Energy Research Academy Energy Industry Doctorates

    E-Print Network [OSTI]

    Painter, Kevin

    Scottish Energy Research Academy (SERA) Energy Industry Doctorates in Renewable Energy Technologies for Guidance 1. Introduction The Energy Technology Partnership (ETP) has established an Energy Industry · Energy conversion and storage · Energy materials · Grid and networks · Energy utilisation in buildings

  20. General Relativistic Radiative Transfer

    E-Print Network [OSTI]

    S. Knop; P. H. Hauschildt; E. Baron

    2006-11-30T23:59:59.000Z

    We present a general method to calculate radiative transfer including scattering in the continuum as well as in lines in spherically symmetric systems that are influenced by the effects of general relativity (GR). We utilize a comoving wavelength ansatz that allows to resolve spectral lines throughout the atmosphere. The used numerical solution is an operator splitting (OS) technique that uses a characteristic formal solution. The bending of photon paths and the wavelength shifts due to the effects of GR are fully taken into account, as is the treatment of image generation in a curved spacetime. We describe the algorithm we use and demonstrate the effects of GR on the radiative transport of a two level atom line in a neutron star like atmosphere for various combinations of continuous and line scattering coefficients. In addition, we present grey continuum models and discuss the effects of different scattering albedos on the emergent spectra and the determination of effective temperatures and radii of neutron star atmospheres.