Powered by Deep Web Technologies
Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

General overview of the Nigerian construction industry  

E-Print Network [OSTI]

The purpose of this study is to investigate and provide a general overview of the Nigerian construction industry, its role in the national economy, the main participants in the industry, the problems that they face, and ...

Dantata, Sanusi (Sanusi A.)

2008-01-01T23:59:59.000Z

2

Oncor Electric Delivery - Large Commercial and Industrial Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Oncor Electric Delivery - Large Commercial and Industrial Rebate Oncor Electric Delivery - Large Commercial and Industrial Rebate Program Oncor Electric Delivery - Large Commercial and Industrial Rebate Program < Back Eligibility Commercial Construction Industrial Installer/Contractor Institutional Local Government Schools State Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Manufacturing Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Home Weatherization Insulation Design & Remodeling Windows, Doors, & Skylights Solar Buying & Making Electricity Water Heating Wind Maximum Rebate General: 20% of the incentive budget in a given budget year Contact Oncor for additional details Program Info State Texas Program Type Utility Rebate Program Rebate Amount DX Air Conditioning: $285.30/kW; $0.09/kWh

3

Energy Department Applauds Nation's First Large-Scale Industrial...  

Office of Environmental Management (EM)

Applauds Nation's First Large-Scale Industrial Carbon Capture and Storage Facility Energy Department Applauds Nation's First Large-Scale Industrial Carbon Capture and Storage...

4

Antje Wittenberg, Directorate General for Enterprise and Industry...  

Broader source: Energy.gov (indexed) [DOE]

for Enterprise and Industry, The EU Raw Materials Initiative and the Report of the Ad-hoc Group Antje Wittenberg, Directorate General for Enterprise and Industry, The EU Raw...

5

Large Industrial Renewable Energy Purchase Program (New Brunswick) |  

Broader source: Energy.gov (indexed) [DOE]

Large Industrial Renewable Energy Purchase Program (New Brunswick) Large Industrial Renewable Energy Purchase Program (New Brunswick) Large Industrial Renewable Energy Purchase Program (New Brunswick) < Back Eligibility Agricultural Commercial Developer Industrial Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative Tribal Government Utility Savings Category Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State New Jersey Program Type Performance-Based Incentive Provider New Brunswick Energy and Mines Beginning January 1, 2012 the Large Industrial Renewable Energy Purchase Program allows NB Power to purchase renewable energy generated by its largest customers at a rate of $95/MWh. This renewable energy will count towards meeting the Province's renewable energy targets at a purchase

6

Large-Scale Industrial CCS Projects Selected for Continued Testing |  

Broader source: Energy.gov (indexed) [DOE]

Large-Scale Industrial CCS Projects Selected for Continued Testing Large-Scale Industrial CCS Projects Selected for Continued Testing Large-Scale Industrial CCS Projects Selected for Continued Testing June 10, 2010 - 1:00pm Addthis Washington, DC - Three Recovery Act funded projects have been selected by the U.S. Department of Energy (DOE) to continue testing large-scale carbon capture and storage (CCS) from industrial sources. The projects - located in Texas, Illinois, and Louisiana - were initially selected for funding in October 2009 as part of a $1.4 billion effort to capture carbon dioxide (CO2) from industrial sources for storage or beneficial use. The first phase of research and development (R&D) included $21.6 million in Recovery Act funding and $22.5 million in private funding for a total initial investment of $44.1 million.

7

Energy Department Applauds Nation's First Large-Scale Industrial Carbon  

Broader source: Energy.gov (indexed) [DOE]

Nation's First Large-Scale Industrial Nation's First Large-Scale Industrial Carbon Capture and Storage Facility Energy Department Applauds Nation's First Large-Scale Industrial Carbon Capture and Storage Facility August 24, 2011 - 6:23pm Addthis Washington, D.C. - The U.S. Department of Energy issued the following statement in support of today's groundbreaking for construction of the nation's first large-scale industrial carbon capture and storage (ICCS) facility in Decatur, Illinois. Supported by the 2009 economic stimulus legislation - the American Recovery and Reinvestment Act - the ambitious project will capture and store one million tons of carbon dioxide (CO2) per year produced as the result of processing corn into fuel-grade ethanol from the nearby Archer Daniels Midland biofuels plant. Since all of

8

Energy Department Applauds Nation's First Large-Scale Industrial Carbon  

Broader source: Energy.gov (indexed) [DOE]

Energy Department Applauds Nation's First Large-Scale Industrial Energy Department Applauds Nation's First Large-Scale Industrial Carbon Capture and Storage Facility Energy Department Applauds Nation's First Large-Scale Industrial Carbon Capture and Storage Facility August 24, 2011 - 6:23pm Addthis Washington, D.C. - The U.S. Department of Energy issued the following statement in support of today's groundbreaking for construction of the nation's first large-scale industrial carbon capture and storage (ICCS) facility in Decatur, Illinois. Supported by the 2009 economic stimulus legislation - the American Recovery and Reinvestment Act - the ambitious project will capture and store one million tons of carbon dioxide (CO2) per year produced as the result of processing corn into fuel-grade ethanol from the nearby Archer Daniels Midland biofuels plant. Since all of

9

Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction |  

Broader source: Energy.gov (indexed) [DOE]

Large-Scale Industrial Carbon Capture, Storage Plant Begins Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction August 24, 2011 - 1:00pm Addthis Washington, DC - Construction activities have begun at an Illinois ethanol plant that will demonstrate carbon capture and storage. The project, sponsored by the U.S. Department of Energy's Office of Fossil Energy, is the first large-scale integrated carbon capture and storage (CCS) demonstration project funded by the American Recovery and Reinvestment Act (ARRA) to move into the construction phase. Led by the Archer Daniels Midland Company (ADM), a member of DOE's Midwest Geological Sequestration Consortium, the Illinois-ICCS project is designed to sequester approximately 2,500 metric tons of carbon dioxide

10

Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction |  

Broader source: Energy.gov (indexed) [DOE]

Large-Scale Industrial Carbon Capture, Storage Plant Begins Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction August 24, 2011 - 1:00pm Addthis Washington, DC - Construction activities have begun at an Illinois ethanol plant that will demonstrate carbon capture and storage. The project, sponsored by the U.S. Department of Energy's Office of Fossil Energy, is the first large-scale integrated carbon capture and storage (CCS) demonstration project funded by the American Recovery and Reinvestment Act (ARRA) to move into the construction phase. Led by the Archer Daniels Midland Company (ADM), a member of DOE's Midwest Geological Sequestration Consortium, the Illinois-ICCS project is designed to sequester approximately 2,500 metric tons of carbon dioxide

11

General Assembly of the National Industrial Association (ANDI) | Department  

Broader source: Energy.gov (indexed) [DOE]

General Assembly of the National Industrial Association (ANDI) General Assembly of the National Industrial Association (ANDI) General Assembly of the National Industrial Association (ANDI) August 8, 2008 - 2:40pm Addthis Remarks As Prepared for Delivery for Acting Deputy Secretary Kupfer Thank you, Mr. Villegas. I appreciate the opportunity to be here with all of you today and join the distinguished list of speakers on your agenda. I have only been in your country for a short time, but it is long enough to recognize that there are ample opportunities for enhanced cooperation between the United States and Colombia in all areas - but especially on energy. The U.S. has long stood as a proud ally of your country-from the early days of Colombia's independence, which President Bush and other U.S. and Colombian officials commemorated at the White House in Washington just a

12

Breakthrough Large-Scale Industrial Project Begins Carbon Capture and  

Broader source: Energy.gov (indexed) [DOE]

Breakthrough Large-Scale Industrial Project Begins Carbon Capture Breakthrough Large-Scale Industrial Project Begins Carbon Capture and Utilization Breakthrough Large-Scale Industrial Project Begins Carbon Capture and Utilization January 25, 2013 - 12:00pm Addthis Washington, DC - A breakthrough carbon capture, utilization, and storage (CCUS) project in Texas has begun capturing carbon dioxide (CO2) and piping it to an oilfield for use in enhanced oil recovery (EOR). Read the project factsheet The project at Air Products and Chemicals hydrogen production facility in Port Arthur, Texas, is significant for demonstrating both the effectiveness and commercial viability of CCUS technology as an option in helping mitigate atmospheric CO2 emissions. Funded in part through the American Recovery and Reinvestment Act (ARRA), the project is managed by the U.S.

13

Breakthrough Large-Scale Industrial Project Begins Carbon Capture and  

Broader source: Energy.gov (indexed) [DOE]

Breakthrough Large-Scale Industrial Project Begins Carbon Capture Breakthrough Large-Scale Industrial Project Begins Carbon Capture and Utilization Breakthrough Large-Scale Industrial Project Begins Carbon Capture and Utilization January 25, 2013 - 12:00pm Addthis Washington, DC - A breakthrough carbon capture, utilization, and storage (CCUS) project in Texas has begun capturing carbon dioxide (CO2) and piping it to an oilfield for use in enhanced oil recovery (EOR). Read the project factsheet The project at Air Products and Chemicals hydrogen production facility in Port Arthur, Texas, is significant for demonstrating both the effectiveness and commercial viability of CCUS technology as an option in helping mitigate atmospheric CO2 emissions. Funded in part through the American Recovery and Reinvestment Act (ARRA), the project is managed by the U.S.

14

Cool Storage Economic Feasibility Analysis for a Large Industrial Facility  

E-Print Network [OSTI]

The analysis of economic feasibility for adding a cool storage facility to shift electric demand to off-peak hours for a large industrial facility is presented. DOE-2 is used to generate the necessary cooling load profiles for the analysis...

Fazzolari, R.; Mascorro, J. A.; Ballard, R. H.

1988-01-01T23:59:59.000Z

15

Breakthrough Large-Scale Industrial Project Begins Carbon Capture and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

28, 2013 28, 2013 Breakthrough Large-Scale Industrial Project Begins Carbon Capture and Utilization DOE-Supported Project in Texas Demonstrates Viability of CCUS Technology Washington, D.C. - A breakthrough carbon capture, utilization, and storage (CCUS) project in Texas has begun capturing carbon dioxide (CO2) and piping it to an oilfield for use in enhanced oil recovery (EOR). MORE INFO Read the project factsheet The project at Air Products and Chemicals hydrogen production facility in Port Arthur, Texas, is significant for demonstrating both the effectiveness and commercial viability of CCUS technology as an option in helping mitigate atmospheric CO2 emissions. Funded in part through the American Recovery and Reinvestment Act (ARRA), the project is managed by the U.S.

16

Large Eddy Simulation of Industrial Flares Philip Smith  

E-Print Network [OSTI]

At the Institute for Clean and Secure Energy at the University of Utah we are focused on education through and private industry companies to promote rapid deployment of new technologies through the use of high to solve many industrially relevant problems such as industrial flares, oxy-coal combustion processes

Utah, University of

17

The Analysis and Development of Large Industrial Steam Systems  

E-Print Network [OSTI]

Chemicals, petroleum, pulp and paper, and many other industries depend heavily on extensive complex steam systems for thermal and mechanical energy delivery. Steam's versatility and desirable characteristics as both a heat transfer medium and a...

Waterland, A. F.

1980-01-01T23:59:59.000Z

18

Deregulation in Japanese gas industries : significance and problems of gas rate deregulation for large industrial customers  

E-Print Network [OSTI]

In recent years, the circumstances surrounding Japanese City gas industries have been changing drastically. On one hand, as energy suppliers, natural gas which has become major fuel resource for city gas, as public utilities, ...

Inoue, Masayuki

1994-01-01T23:59:59.000Z

19

ITP Industrial Distributed Energy: Assessment of Large Combined...  

Broader source: Energy.gov (indexed) [DOE]

Summary Report: Assessment of Large Combined Heat and Power Market ORNL Subcontract 4000021456 Task 2 Submitted to: Oak Ridge National Laboratory P.O. Box 2008 1 Bethel Valley Road...

20

Generalizing by Similarity: Lessons Learnt from Industrial Case Studies  

E-Print Network [OSTI]

about similarities and dissimilarities between past and future cases (i.e. projects1 by other IT vendor organizations and researchers who want to generalize from past cases to present. It would save them a lot of cost and effort if they could reliably depend on their past experience and draw

Wieringa, Roel

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Industrial  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Products Industrial Institutional Multi-Sector Residential Momentum Savings Regional Efficiency Progress Report Utility Toolkit Energy Smart Industrial - Energy Management...

22

Industry  

E-Print Network [OSTI]

2004). US DOEs Industrial Assessment Centers (IACs) are anof Energys Industrial Assessment Center program in SMEs

Bernstein, Lenny

2008-01-01T23:59:59.000Z

23

Electrolux to DOE General Counsel; Re:Request for Comment on Large Capacity  

Broader source: Energy.gov (indexed) [DOE]

Electrolux to DOE General Counsel; Re:Request for Comment on Large Electrolux to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers Electrolux to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers Letter from Electrolux to Department of Energy General Counsel; Re:Request for Comment on Large Capacity Clothes Washers Electrolux sumitted comments on re-testing, re-certification, and re-rating of large-capacity residential clothes washers tested with alternative procedures under a waiver situation. Elextrolux requested a waiver and interim waivers for large-capacity. Electrrolux addressed the General Counsel's specific question on retesting and stated that so long as the manufacturer documents that it has tested the products in accordance with the actual basket volume

24

LG to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to DOE General Counsel; Re:Request for Comment on Large Capacity to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers LG to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers LG response to DOE's request for information regarding alternative test procedures for large-capacity clothes washer models, December 7, 2010. After DOE requested the views of interested parties concerning implementation of an alternative test procedure for large-capacity clothes washer models, i.e., those in excess of 3.8 cu ft, LG Vice President of Government Relations and Communications, John I. Taylor, submits this letter outlining LG's views on the set of "unique circumstances." LG response to DOE's request for information regarding alternative test procedures for large-capacity clothes washer models, December 7, 2010.

25

Industry  

E-Print Network [OSTI]

Information on corn wet milling. Corn Refiners Association corn wet milling industry: An ENERGYas an automotive fuel. Corn wet milling is the most energy-

Bernstein, Lenny

2008-01-01T23:59:59.000Z

26

Industry  

E-Print Network [OSTI]

increased use of biomass and energy efficiency improvements,Moreira, J. , 2006: Global biomass energy potential. Journal19712004 Notes 1) Biomass energy included 2) Industrial

Bernstein, Lenny

2008-01-01T23:59:59.000Z

27

Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

An Exploration of Innovation and An Exploration of Innovation and Energy Efficiency in an Appliance Industry Prepared by Margaret Taylor, K. Sydny Fujita, Larry Dale, and James McMahon For the European Council for an Energy Efficient Economy March 29, 2012 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY LBNL - 5689E An Exploration of Innovation and Energy Efficiency in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and direction of technological change of product industries; the factors that underlie the outcomes of innovation in these industries; and the ways the innovation system might respond to any given intervention. The report provides an overview of the dynamics of energy efficiency policy and innovation in the appliance

28

Industry  

E-Print Network [OSTI]

for im- proving energy efficiency of corn wet milling havefor the corn wet milling industry: An ENERGY STAR Guide forfuel. Corn wet milling is the most energy-intensive food

Bernstein, Lenny

2008-01-01T23:59:59.000Z

29

Industry  

E-Print Network [OSTI]

options for combined heat and power in Canada. Office ofpolicies to promote combined heat and power in US industry.with fuel inputs in combined heat and power plants being

Bernstein, Lenny

2008-01-01T23:59:59.000Z

30

Industry  

E-Print Network [OSTI]

EJ of primary energy, 40% of the global total of 227 EJ. Bytotal energy use by industry and on the fraction of electricity use consumed by motor driven systems was taken as representative of global

Bernstein, Lenny

2008-01-01T23:59:59.000Z

31

Industry  

SciTech Connect (OSTI)

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01T23:59:59.000Z

32

Industrial  

Gasoline and Diesel Fuel Update (EIA)

Industrial Industrial 8,870,422 44.3% Commercial 3,158,244 15.8% Electric Utilities 2,732,496 13.7% Residential 5,241,414 26.2% Source: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." T e x a s L o u i s i a n a C a l i f o r n i a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Industrial Billion Cubic Meters T e x a s C a l i f o r n i a F l o r i d a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Electric Utilities Billion Cubic Meters N e w Y o r k C a l i f o r n i a I l l i n o i s A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Commercial Billion Cubic Meters I l l i n o i s C a l i f o r n i a N e w Y o r k A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Residential Billion Cubic Meters 11. Natural Gas Delivered to Consumers in the United States, 1996 Figure Volumes in Million Cubic Feet Energy Information Administration

33

How R&D investments influence TFP growth: Evidence from Chinas large and medium-sized industrial enterprises  

Science Journals Connector (OSTI)

This paper investigates the potential channels through which R&D may influence TFP growth using industry-level panel data of Chinas large and medium-sized ... provide a closer look of the relationship between R&D

Liqun Zhou; Liangke Xia

2010-12-01T23:59:59.000Z

34

Large eddy simulation of flows in industrial compressors: a path from 2015 to 2035  

Science Journals Connector (OSTI)

...eddy simulation of flows in industrial compressors: a path from...flow that develops in such industrial machines is extremely hard...TM-2009-215627, NASA Glenn Research Center. 6 McMullan, WA , and GJ...Poinsot. 2009 Development and assessment of a coupled strategy for...

2014-01-01T23:59:59.000Z

35

Verifying Very Large Industrial Circuits Using 100 Processes , Orna Grumberg1  

E-Print Network [OSTI]

of large- scale distributed computing platforms, such as computational grids and huge clusters. Such infrastructure holds a great promise for the highly resource-demanding task of verifying and checking large- bolic model checker, on top of a large-scale distributed environment. We develop a hybrid algorithm

Grumberg, Orna

36

Geophysical and industrial requirements of large scale rollout of concentrating solar power (CSP) in South Africa.  

E-Print Network [OSTI]

??Includes abstract. This study investigates the requirements and implications if South Africa were to evolve its electricity supply structure to a large emphasis on Concentrated (more)

Morse, Warren.

2009-01-01T23:59:59.000Z

37

Consideration of 34. 5 KV as an in-plant voltage for a large industrial user  

SciTech Connect (OSTI)

Traditionally, the in-plant distribution voltage for a large refinery or petrochemical complex has been 13.8 kV. Selection of this voltage level was dictated primarily by economic factors, simply because in most cases the magnitude of the loads or the lengths of the feeders did not produce sufficient savings to compensate for the costlier higher voltage switchgear. This paper presents some engineering and cost considerations for distribution at 34.5 kV and attempts to show that this voltage level is both economically and technically feasible for large electrical systems.

Niculescu, T.D.; Regan, R.R.

1983-09-01T23:59:59.000Z

38

GE to DOE General Counsel; Re:Request for Comment on Large Capacity...  

Office of Environmental Management (EM)

Clothes Washers GE urges the department engage in rulmaking to amend the clothes washer test procedure to reflect efficiency standards of large-capacity residential clothes washer...

39

LG to DOE General Counsel; Re:Request for Comment on Large Capacity...  

Energy Savers [EERE]

Clothes Washers LG response to DOE's request for information regarding alternative test procedures for large-capacity clothes washer models, December 7, 2010. After DOE...

40

Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on altitude. This large flux allows testing of semiconductor devices at greatly accelerated rates. Industry users are invited to contact Steve Wender, phone:505-667-1344 or...

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

GE to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers  

Broader source: Energy.gov [DOE]

GE urges the department engage in rulmaking to amend the clothes washer test procedure to reflect efficiency standards of large-capacity residential clothes washer machines. GE also urges the DOE...

42

Viet Nam: Wood Industry Short of Raw Material, Sound Policies The Secretary General of the Viet Nam Timber and Forestry Products Association, Nguyen Ton Quyen, talked with  

E-Print Network [OSTI]

Viet Nam: Wood Industry Short of Raw Material, Sound Policies The Secretary General of the Viet Nam (Vietnam Economic Times) about Viet Nam's export of wood products. The year 2005 marks an in-crease in wood explain this increase? The State allows 150,000 cu.m of wood from natural forests and 1.2 million cu

43

Maximal freedom at minimum cost: linear large-scale structure in general modifications of gravity  

E-Print Network [OSTI]

We present a turnkey solution, ready for implementation in numerical codes, for the study of linear structure formation in general scalar-tensor models involving a single universally coupled scalar field. We show that the totality of cosmological information on the gravitational sector can be compressed - without any redundancy - into five independent and arbitrary functions of time only and one constant. These describe physical properties of the universe: the observable background expansion history, fractional matter density today, and four functions of time describing the properties of the dark energy. We show that two of those dark-energy property functions control the existence of anisotropic stress, the other two - dark-energy clustering, both of which are can be scale-dependent. All these properties can in principle be measured, but no information on the underlying theory of acceleration beyond this can be obtained. We present a translation between popular models of late-time acceleration (e.g. perfect fluids, f (R), kinetic gravity braiding, galileons), as well as the effective field theory framework, and our formulation. In this way, implementing this formulation numerically would give a single tool which could consistently test the majority of models of late-time acceleration heretofore proposed.

Emilio Bellini; Ignacy Sawicki

2014-04-14T23:59:59.000Z

44

Industry Alliance Industry Alliance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industry Alliance Industry Alliance Clean, Sustainable Energy for the 21st Century Industry Alliance Industry Alliance Clean, Sustainable Energy for the 21st Century October, 2010...

45

The medieval metal industry was the cradle of modern large-scale atmospheric lead pollution in northern Europe  

SciTech Connect (OSTI)

There is great concern for contamination of sensitive ecosystems in high latitudes by long-range transport of heavy metals and other pollutants derived from industrial areas in lower latitudes. Atmospheric pollution of heavy metals has a very long history, and since metals accumulate in the environment, understanding of present-day pollution conditions requires knowledge of past atmospheric deposition. The authors use analyses of lead concentrations and stable lead isotopes ({sup 206}Pb/{sup 207}Pb ratios) of annually laminated sediments from four lakes in northern Sweden to provide a decadal record of atmospheric lead pollution for the last 3000 years. There is a clear signal in the sediments of airborne pollution from Greek and Roman cultures 2000 years ago, followed by a period of clean conditions 400--900 A.D. From 900 A.D. there was a conspicuous, permanent increase in atmospheric lead pollution fallout, The sediments reveal peaks in atmospheric lead pollution at 1200 and 1530 A.D. comparable to present-day levels. These peaks match the history of metal production in Europe. This study indicates that the contemporary atmospheric pollution climate in northern Europe was established in Medieval time, rather than in the industrial period. Atmospheric lead pollution deposition did not, when seen in a historical perspective, increase as much as usually assumed with the Industrial Revolution.

Braennvall, M.L.; Bindler, R.; Renberg, I.; Emteryd, O.; Bartnicki, J.; Billstroem, K.

1999-12-15T23:59:59.000Z

46

36 IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 35, NO. 1, JANUARY/FEBRUARY 1999 Multilevel Converters for Large Electric Drives  

E-Print Network [OSTI]

Converters for Large Electric Drives Leon M. Tolbert, Senior Member, IEEE, Fang Zheng Peng, Senior Member multilevel con- verters as an application for high-power and/or high-voltage electric motor drives all-electric drives because it uses several levels of dc voltage sources, which would be available

Tolbert, Leon M.

47

Large area self-powered gamma ray detector. Phase 2, Development of a source position monitor for use on industrial radiographic units  

SciTech Connect (OSTI)

The purpose of this research was to develop a large area self-powered gamma detector (LASPGD) capable of detecting the movement of sealed radiation sources into and out of industrial radiographic units and to construct a prototype source position monitor (SPM) for these units utilizing the LASPGD. Prototype isotropic and directional LASPGDs, with solid and inert gas dielectrics, were developed and extensively tested using calibrated gamma sources (i.e., Cs-137, and Co-60). The sensitivities of the isotropic detectors, with inert gas dielectrics, were found to be approximately a factor of ten greater than those measured for the solid dielectric LASPGDs. Directionally sensitive self-powered detectors were found to exhibit a forward-to-back hemispherical sensitivity ratio of approximately 2 to 1. Industrial radiographic units containing Ir-192 sources with different activities were used to test the performance of the SPM. The SPM, which utilized a gas dielectric LASPGD, performed as designed. That is, the current generated in the LASPGD was converted to a voltage, amplified and used to control the on/off state of an incandescent lamp. The incandescent lamp, which functions as the source/out warning indicator, flashes at a rate of one flash per second when the source is in use (i.e. out of its shield).

LeVert, F.E. [K.E.M.P. Corp., Knoxville, TN (United States)

1994-01-01T23:59:59.000Z

48

General Engineers  

U.S. Energy Information Administration (EIA) Indexed Site

General Engineers General Engineers The U.S. Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the General Engineer, whose work is associated with analytical studies and evaluation projects pertaining to the operations of the energy industry. Responsibilities: General Engineers perform or participate in one or more of the following important functions: * Design modeling systems to represent energy markets and the physical properties of energy industries * Conceive, initiate, monitor and/or conduct planning and evaluation projects and studies of continuing and future

49

Low-rank approximations for large stationary covariance matrices, as used in the Bayesian and generalized-least-squares analysis of pulsar-timing data  

E-Print Network [OSTI]

Many data-analysis problems involve large dense matrices that describe the covariance of stationary noise processes; the computational cost of inverting these matrices, or equivalently of solving linear systems that contain them, is often a practical limit for the analysis. We describe two general, practical, and accurate methods to approximate stationary covariance matrices as low-rank matrix products featuring carefully chosen spectral components. These methods can be used to greatly accelerate data-analysis methods in many contexts, such as the Bayesian and generalized-least-squares analysis of pulsar-timing residuals.

van Haasteren, Rutger

2014-01-01T23:59:59.000Z

50

Low-rank approximations for large stationary covariance matrices, as used in the Bayesian and generalized-least-squares analysis of pulsar-timing data  

E-Print Network [OSTI]

Many data-analysis problems involve large dense matrices that describe the covariance of stationary noise processes; the computational cost of inverting these matrices, or equivalently of solving linear systems that contain them, is often a practical limit for the analysis. We describe two general, practical, and accurate methods to approximate stationary covariance matrices as low-rank matrix products featuring carefully chosen spectral components. These methods can be used to greatly accelerate data-analysis methods in many contexts, such as the Bayesian and generalized-least-squares analysis of pulsar-timing residuals.

Rutger van Haasteren; Michele Vallisneri

2014-07-24T23:59:59.000Z

51

The Effect of a Large Freshwater Perturbation on the Glacial North Atlantic Ocean Using a Coupled General Circulation Model  

Science Journals Connector (OSTI)

The commonly held view of the conditions in the North Atlantic at the last glacial maximum, based on the interpretation of proxy records, is of large-scale cooling compared to today, limited deep convection, and extensive sea ice, all associated ...

C. D. Hewitt; A. J. Broccoli; M. Crucifix; J. M. Gregory; J. F. B. Mitchell; R. J. Stouffer

2006-09-01T23:59:59.000Z

52

Steady General Relativistic Magnetohydrodynamic Inflow/Outflow Solution along Large-Scale Magnetic Fields that Thread a Rotating Black Hole  

E-Print Network [OSTI]

General relativistic magnetohydrodynamic (GRMHD) flows along magnetic fields threading a black hole can be divided into inflow and outflow part, according to the result of the competition between the black hole gravity and magneto-centrifugal forces along the field line. Here we present the first self-consistent, semi-analytical solution for a cold, Poynting flux-dominated (PFD) GRMHD flow, which pass all four critical (inner and outer, Alfv\\'en and fast-magnetosonic) points along a parabolic streamline. By assuming that the dominating (electromagnetic) component of the energy flux per flux tube is conserved at the surface where the inflow and outflow are separated, the outflow part of the solution can be constraint by the inflow part of the solution.The semi-analytical method can provide fiducial and complementary solutions for GRMHD simulations around the rotating black hole, given that the black hole spin, global streamline, and magnetizaion (i.e., a mass-loading at the inflow/outflow separation) are presc...

Pu, Hung-Yi; Hirotani, Kouichi; Mizuno, Yosuke; Wu, Kinwah; Asada, Keiichi

2015-01-01T23:59:59.000Z

53

Rhombic Cell Analysis - A New Way of Probing the Large-Scale Structure of the Universe. I. General Considerations  

E-Print Network [OSTI]

A new way of probing the large-scale structure of the universe is proposed. Space is partitioned into cells the shape of rhombic dodecahedron. The cells are labelled ``filled'' or ``empty'' according as they contain galaxies or not. The cell size is so chosen as to have nearly equal numbers of filled and empty cells for the given galaxy sample. Two observables on each cell are definable: the number of its {\\em like} neighbors, $n_1$, and a two-suffixed topological type $\\tau$, the suffixes being the numbers of its like and unlike {\\em neighbor-groups}. The frequency distributions of $n_1$ and $\\tau$ in the observed set of filled (empty) cells are then considered as indicators of the morphology of the set. The method is applied to the CfA catalogue of galaxies as an illustration. Despite its limited size the data offers evidence 1) that the empty cells are more strongly clustered than the filled cells, and 2) that the filled cells, but not the empty cells, have a tendency of occurring in sheets. Further directions of development both in theory and application are indicated.

T. Kiang

2003-06-05T23:59:59.000Z

54

Users from Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Users from Industry Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

55

Energy Efficient Industrial Building Design  

E-Print Network [OSTI]

The design of industrial buildings today is still largely unaffected by energy legislation and building technologies. The present corporate tax structures for industry do little to encourage investment of capital for future operating cost savings...

Holness, G. V. R.

1983-01-01T23:59:59.000Z

56

Users from Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Users from Industry Print Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

57

Safety in Offshore Industry  

Science Journals Connector (OSTI)

A large number of accidents in offshore industry have occurred over the years. Ten of the deadliest of these accidents occurred at or on the Piper Alpha ... , the Alexander L. Kielland (a Norwegian semi-submersible

2010-01-01T23:59:59.000Z

58

Utility and Industrial Partnerships  

E-Print Network [OSTI]

In the past decade, many external forces have shocked both utilities and their large industrial customers into seeking more effective ways of coping and surviving. One such way is to develop mutually beneficial partnerships optimizing the use...

Sashihara, T. F.

59

Industrial Engineering Industrial Advisory Board  

E-Print Network [OSTI]

Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

Gelfond, Michael

60

Industrial Partnerships | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Carbon Fiber Consortium Manufacturing Industrial Partnerships Staff University Partnerships Events and Conferences Success Stories Video Newsletters Staff Contacts Partnerships Home | Connect with ORNL | For Industry | Partnerships | Industrial Partnerships SHARE Industrial Partnerships ORNL takes great pride in its work with U.S. industry. Each year, the Industrial Partnerships team hosts more than 100 visits to ORNL by both large corporations and small companies to help our potential partners understand the capabilities and expertise that exist at the laboratory and the various mechanisms available to help facilitate collaboration. Mechanism for Partnering How do I get started exploring industrial partnerships at ORNL? As the nation's largest science and energy laboratory, it can sometimes be

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

SymposiumandIndustrialAffiliatesProgramLightinAction Industrial Affiliates Program  

E-Print Network [OSTI]

SymposiumandIndustrialAffiliatesProgramLightinAction #12;Industrial Affiliates Program Friday, 8 Session I Abstract: Recently Additive Manufacturing (AM) has been hailed as the "third industrial revolution" by Economist magazine [April -2012]. Precision of the product manufactured by AM largely depends

Van Stryland, Eric

62

The Potential for Increased Atmospheric CO2 Emissions and Accelerated Consumption of Deep Geologic CO2 Storage Resources Resulting from the Large-Scale Deployment of a CCS-Enabled Unconventional Fossil Fuels Industry in the U.S.  

SciTech Connect (OSTI)

Desires to enhance the energy security of the United States have spurred significant interest in the development of abundant domestic heavy hydrocarbon resources including oil shale and coal to produce unconventional liquid fuels to supplement conventional oil supplies. However, the production processes for these unconventional fossil fuels create large quantities of carbon dioxide (CO2) and this remains one of the key arguments against such development. Carbon dioxide capture and storage (CCS) technologies could reduce these emissions and preliminary analysis of regional CO2 storage capacity in locations where such facilities might be sited within the U.S. indicates that there appears to be sufficient storage capacity, primarily in deep saline formations, to accommodate the CO2 from these industries. Nevertheless, even assuming wide-scale availability of cost-effective CO2 capture and geologic storage resources, the emergence of a domestic U.S. oil shale or coal-to-liquids (CTL) industry would be responsible for significant increases in CO2 emissions to the atmosphere. The authors present modeling results of two future hypothetical climate policy scenarios that indicate that the oil shale production facilities required to produce 3MMB/d from the Eocene Green River Formation of the western U.S. using an in situ retorting process would result in net emissions to the atmosphere of between 3000-7000 MtCO2, in addition to storing potentially 900-5000 MtCO2 in regional deep geologic formations via CCS in the period up to 2050. A similarly sized, but geographically more dispersed domestic CTL industry could result in 4000-5000 MtCO2 emitted to the atmosphere in addition to potentially 21,000-22,000 MtCO2 stored in regional deep geologic formations over the same period. While this analysis shows that there is likely adequate CO2 storage capacity in the regions where these technologies are likely to deploy, the reliance by these industries on large-scale CCS could result in an accelerated rate of utilization of the nations CO2 storage resource, leaving less high-quality storage capacity for other carbon-producing industries including electric power generation.

Dooley, James J.; Dahowski, Robert T.; Davidson, Casie L.

2009-11-02T23:59:59.000Z

63

Implementation of a generalized actuator disk wind turbine model into the weather research and forecasting model for large-eddy simulation applications  

Science Journals Connector (OSTI)

A generalized actuator disk (GAD) wind turbine parameterization designed for large-eddy simulation (LES) applications was implemented into the Weather Research and Forecasting (WRF) model. WRF-LES with the GAD model enables numerical investigation of the effects of an operating wind turbine on and interactions with a broad range of atmospheric boundary layer phenomena. Numerical simulations using WRF-LES with the GAD model were compared with measurements obtained from the Turbine Wake and Inflow Characterization Study (TWICS-2011) the goal of which was to measure both the inflow to and wake from a 2.3-MW wind turbine. Data from a meteorological tower and two light-detection and ranging (lidar) systems one vertically profiling and another operated over a variety of scanning modes were utilized to obtain forcing for the simulations and to evaluate characteristics of the simulated wakes. Simulations produced wakes with physically consistent rotation and velocity deficits. Two surface heat flux values of 20?W m?2 and 100?W m?2 were used to examine the sensitivity of the simulated wakes to convective instability. Simulations using the smaller heat flux values showed good agreement with wake deficits observed during TWICS-2011 whereas those using the larger value showed enhanced spreading and more-rapid attenuation. This study demonstrates the utility of actuator models implemented within atmospheric LES to address a range of atmospheric science and engineering applications. Validated implementation of the GAD in a numerical weather prediction code such as WRF will enable a wide range of studies related to the interaction of wind turbines with the atmosphere and surface.

J. D. Mirocha; B. Kosovic; M. L. Aitken; J. K. Lundquist

2014-01-01T23:59:59.000Z

64

Industrial Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Industrial Industrial / Manufacturing Buildings Industrial/manufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey (MECS). See the MECS home page for further information. Commercial buildings found on a manufacturing industrial complex, such as an office building for a manufacturer, are not considered to be commercial if they have the same owner and operator as the industrial complex. However, they would be counted in the CBECS if they were owned and operated independently of the manufacturing industrial complex. Specific questions may be directed to: Joelle Michaels joelle.michaels@eia.doe.gov CBECS Manager Release date: January 21, 2003 Page last modified: May 5, 2009 10:18 AM http://www.eia.gov/consumption/commercial/data/archive/cbecs/pba99/industrial.html

65

NETL: Industrial Capture & Storage  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 1 Technologies Industrial Capture & Storage Area 1 Large-Scale Industrial CCS Program The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL, or DOE) is currently implementing a program titled "Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO2 Use." This CO2 Capture and Sequestration (CCS) and CO2 use program is a cost-shared collaboration between the Government and industry whose purpose is to increase investment in clean industrial technologies and sequestration projects. In accordance with the American Recovery and Reinvestment Act of 2009, and Section 703 of Public Law 110-140, DOE's two specific objectives are to demonstrate: (1) Large-Scale Industrial CCS projects from industrial sources, and (2) Innovative Concepts for beneficial CO2 use.

66

Environmental management in fishery-based industries. Working papers in industrial planning  

SciTech Connect (OSTI)

The main objectives of this study are to present technical information and costs related to waste management in the seafood processing industry. Although there is a lack of published data on environmental management in the fish processing industry in developing countries, the focus is on seafood processors in developing countries drawing upon developed countries' experiences as relevant. Recovery and utilization of seafood wastes, both from wastewater and solid wastes, can be good policy for protecting the environment and for the seafood processing industry. Various options, such as production of fish meal, fish silage, and mince are explored. Fish silage, for example, is generally suggested as an option for waste utilization in small operations, whereas production of fish meal is more suitable for large plants.

Not Available

1991-06-19T23:59:59.000Z

67

Industry @ ALS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industry @ ALS Industry @ ALS Industry @ ALS Concrete Industry Benefits from Ancient Romans and the ALS Print Thursday, 17 October 2013 14:24 New insights into the Romans' ingenious concrete harbor structures emerging from ALS beamline research could move the modern concrete industry toward its goal of a reduced carbon footprint. Summary Slide Read more... Moving Industry Forward: Finding the Environmental Opportunity in Biochar Print Thursday, 12 September 2013 08:41 Using ALS Beamlines 10.3.2 and 8.3.2, the Environmental Protection Agency (EPA) is currently investigating how biochar sorbs environmental toxins and which kinds of biochar are the most effective. The possibilities for widespread use have already launched entrepreneurial commercial ventures. Summary Slide

68

NETL: Industrial Capture & Storage  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Capture & Storage Industrial Capture & Storage Technologies Industrial Capture & Storage The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL, or DOE) is currently implementing a program titled "Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO2 Use." This CO2 Capture and Sequestration (CCS) and CO2 use program is a cost-shared collaboration between the Government and industry whose purpose is to increase investment in clean industrial technologies and sequestration projects. In accordance with the American Recovery and Reinvestment Act of 2009, and Section 703 of Public Law 110-140, DOE's two specific objectives are to demonstrate: (1) Large-Scale Industrial CCS projects from industrial sources, and (2) Innovative Concepts for beneficial CO2 use.

69

Industrial Hygienist  

Broader source: Energy.gov [DOE]

A successful candidate in this position wil l serve as an Industrial Hygienist in the Operations Division, providing technical oversight of the Pacific Northwest National Laboratory contractors...

70

Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Users - Media Publications and Information The Invisible Neutron Threat Neutron-Induced Failures in Semiconductor Devices Nuclear Science Research at the LANSCE-WNR...

71

general_atomics.cdr  

Office of Legacy Management (LM)

300 feet above sea level. The General Atomics site is in the center of Torrey Mesa Science Center, a 304-acre industrial park. No ground water wells are at or near the Hot Cell...

72

Wool Industries Research Association  

Science Journals Connector (OSTI)

... THE report of Dr. A. B. P. Cassie, director of research of the Wool Industries Research Association, presented to the annual general meeting of the Association on April ... No. 212.) Headingley, Leeds: 1959). Modifications have been made to the pilot scouring plant, while methods for determining oil and grease in ...

1959-06-27T23:59:59.000Z

73

Industrial microbiology  

Science Journals Connector (OSTI)

...include the fruit, wine, baking, milling, dairy, and distill-ing industries...fructose known as high fruc-tose corn syrup. Between 500,000 and 1...glucose isomerase has permitted the corn wet milling industry to capture 30 percent of...

AL Demain

1981-11-27T23:59:59.000Z

74

" Generation by Census Region, Industry Group, Selected Industries, Presence of"  

U.S. Energy Information Administration (EIA) Indexed Site

4. Total Inputs of Energy for Heat, Power, and Electricity" 4. Total Inputs of Energy for Heat, Power, and Electricity" " Generation by Census Region, Industry Group, Selected Industries, Presence of" " General Technologies, and Industry-Specific Technologies for Selected" " Industries, 1991" " (Estimates in Trillion Btu)" ,,," Census Region",,,,"RSE" "SIC","Industry Groups",," -------------------------------------------",,,,"Row" "Code(a)","and Industry","Total","Northeast","Midwest","South","West","Factors" ,"RSE Column Factors:",0.7,1.3,1,0.9,1.3

75

Cyclical dynamics of airline industry earnings  

E-Print Network [OSTI]

Aggregate airline industry earnings have exhibited large-amplitude cyclical behavior since deregulation in 1978. To explore the causes of these cycles we develop a behavioral dynamic model of the airline industry with ...

Pierson, Kawika

76

Process Energy Audit for Large Industries  

E-Print Network [OSTI]

be the identification of DSM technologies. Once the DSM technologies are identified, the audi tor would verify whether those technologies and equipment are commercially viable and proven in the market. Task 13 - Obtain Vendor Data Respective DSM technology... and equipment vendors would be contacted to obtain technical details on the equipment which is likely to be recommended. Task 14 - Obtain Quotation/Proposal Prices for selected DSM equipment will be obtained from respective vendors. Task 15 - Calculate...

Chari, S.

77

Phase structure of a generalized Nambu Jona-Lasinio model with Wilson fermions in the mean field or large $N$-expansion  

E-Print Network [OSTI]

We analyze the vacuum structure of a generalized lattice Nambu--Jona-Lasinio model with two flavors of Wilson fermions, such that its continuum action is the most general four-fermion action with 'trivial' color interactions, and having a $SU(2)_V x SU(2)_A$ symmetry in the chiral limit. The phase structure of this model in the space of the two four-fermion couplings shows, in addition to the standard Aoki phases, new phases with $ != 0$, in close analogy to similar results recently suggested by some of us for lattice QCD with two degenerate Wilson fermions. This result shows how the phase structure of an effective model for low energy QCD cannot be entirely understood from Wilson Chiral Perturbation Theory, based on the standard QCD chiral effective Lagrangian approach.

V. Azcoiti; G. Di Carlo; E. Follana; M. Giordano; A. Vaquero

2013-05-08T23:59:59.000Z

78

Industry Perspective  

Broader source: Energy.gov [DOE]

Fuel cell and biogas industries perspectives. Presented by Mike Hicks, Fuel Cell and Hydrogen Energy Association, at the NREL/DOE Biogas and Fuel Cells Workshop held June 11-13, 2012, in Golden, Colorado.

79

Oklahoma Industrial Energy Management Program  

E-Print Network [OSTI]

The need for sound energy management is no longer worthy of debate. Action is necessary and much is being done by U.S. industry. Unfortunately, however, the majority of the work is being done by the few large energy intensive industries throughout...

Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

1979-01-01T23:59:59.000Z

80

Industrial Research Ltd IRL | Open Energy Information  

Open Energy Info (EERE)

IRL Jump to: navigation, search Name: Industrial Research Ltd (IRL) Place: New Zealand Sector: Services Product: General Financial & Legal Services ( State-owned commercial entity...

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Pre-industrial charcoal production in Lower Lusatia (Brandenburg, Germany): Detection and evaluation of a large charcoal-burning field by combining archaeological studies, GIS-based analyses of shaded-relief maps and dendrochronological age determination  

Science Journals Connector (OSTI)

Abstract In pre-industrial times, charcoal burning was a common source of energy across Europe. Charcoal production and its related consequences for the upland environment are well known due to historical and palaeoenvironmental research. In recent years, awareness has grown regarding the use of woods in the lowlands for charcoal production. In the last 20 years, a large charcoal-burning field in Lower Lusatia (Brandenburg, North German Lowlands) was discovered by systematic archaeological excavations of the opencast mine of Jnschwalde. However, the excavations are limited to the mine, which only covers a portion of the Jnschwalder Heide and the surrounding forests. In this paper, we present the results of our study regarding the spatial extension and timing of charcoal production in the Jnschwalder Heide and its surrounding areas. We applied a combined approach using archaeological research results, GIS-analyses of shaded-relief maps (SRMs) and tree-ring dating of selected charcoal kiln remains. Approximately 900 excavated charcoal kiln ground plans were analysed, which provided a solid data basis for our GIS analyses. For an extensive evaluation, we enlarged our study area beyond the limits of the lignite mine. We identified and digitised the remains of the charcoal kilns by creating \\{SRMs\\} from digital elevation models (DEMs) that were based on high-resolution airborne laser scanning data (ALS). The data from the excavated and digitised charcoal kiln remains were analysed in terms of their sizes and spatial distributions. In addition, the dendrochronological ages of 16 selected charcoal kiln remains were determined. This study shows that charcoal production was more extensive than initially proven by archaeological excavations. The remains of more than 5000 charcoal kilns were detected on the \\{SRMs\\} across an area that was twice as large as the excavated charcoal-burning field. In the Jnschwalder Heide, considerably more charcoal kiln relicts exist compared with the surrounding communal areas. Furthermore, the charcoal kiln remains in the Jnschwalder Heide have larger diameters, suggesting large-scale charcoal production for supplying energy to the nearby ironworks at Peitz. However, the charcoal production on the communal land was most likely for local crafts. The ages of the charcoal kiln remains indicated that charcoal production occurred between the 17th and 19th centuries, corresponding with the main period of charcoal burning. Overall, our study suggested that charcoal production sites are underestimated in the modern landscapes of the North German Lowlands.

A. Raab; M. Takla; T. Raab; A. Nicolay; A. Schneider; H. Rsler; K.-U. Heuner; E. Bnisch

2014-01-01T23:59:59.000Z

82

Industry Profile | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Industry Profile Industry Profile Industry Profile November 1, 2013 - 11:40am Addthis The largest energy consuming industrial sectors account for the largest share of CHP capacity; namely: Chemicals (30%), Petroleum Refining (17%), and Paper Products (14%). Other industrial sectors include: Commercial/Institutional (12%), Food (8%), Primary Metals (5%), Other Manufacturing (8%), and Other Industrial (6%). Combined heat and power (CHP)-sometimes referred to as cogeneration-involves the sequential process of producing and utilizing electricity and thermal energy from a single fuel. CHP is widely recognized to save energy and costs, while reducing carbon dioxide (CO2) and other pollutants. CHP is a realistic, near-term option for large energy efficiency improvements and significant CO2 reductions.

83

Industrial Radiology  

Science Journals Connector (OSTI)

... chief application of industrial radiology in Norway is in the examination of pipe welds in hydroelectric plant. H. Vinter (Denmark), director of the Akademiet for de Technische Videns ... and to compare various methods of non-destructive testing. He gave results of tests on turbine disk forgings of austenitic steel which showed satisfactory agreement between radiography, ultrasonic examination and ...

1950-11-18T23:59:59.000Z

84

Anisotropic models to account for large borehole washouts to estimate gas hydrate saturations in the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II Alaminos Canyon 21B well  

Science Journals Connector (OSTI)

Through the use of 3-D seismic amplitude mapping, several gas hydrate prospects were identified in the Alaminos Canyon (AC) area of the Gulf of Mexico. Two locations were drilled as part of the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II (JIP Leg II) in May of 2009 and a comprehensive set of logging-while-drilling (LWD) logs were acquired at each well site. LWD logs indicated that resistivity in the range of ?2ohm-m and P-wave velocity in the range of ?1.9km/s were measured in the target sand interval between 515 and 645 feet below sea floor. These values were slightly elevated relative to those measured in the sediment above and below the target sand. However, the initial well log analysis was inconclusive regarding the presence of gas hydrate in the logged sand interval, mainly because large washouts caused by drilling in the target interval degraded confidence in the well log measurements. To assess gas hydrate saturations in the sedimentary section drilled in the Alaminos Canyon 21 B (AC21-B) well, a method of compensating for the effect of washouts on the resistivity and acoustic velocities was developed. The proposed method models the washed-out portion of the borehole as a vertical layer filled with sea water (drilling fluid) and the apparent anisotropic resistivity and velocities caused by a vertical layer are used to correct the measured log values. By incorporating the conventional marine seismic data into the well log analysis, the average gas hydrate saturation in the target sand section in the AC21-B well can be constrained to the range of 828%, with 20% being our best estimate.

M.W. Lee; T.S. Collett; K.A. Lewis

2012-01-01T23:59:59.000Z

85

Guidelines for Estimating Unmetered Industrial Water Use  

SciTech Connect (OSTI)

The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

Boyd, Brian K.

2010-08-01T23:59:59.000Z

86

Poor show for aviation industry  

Science Journals Connector (OSTI)

... Soviet Union and China, there are only three practical suppliers of large civil aircraft (Boeing, McDonnell-Douglas and Airbus Industrie, the European consortium) and three manufacturers of large ... of its engines seems to have settled down at 1,000 million or thereabouts. (Boeing's past successes may owe something to its economical ways of working.) Even allowing ...

1984-09-06T23:59:59.000Z

87

Implementing an Industrial Energy Efficiency Program in Minnesota...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Purpose Because the Minnesota industrial sector makes up such a large portion of total energy consumption within the state, targeted resources can produce large reductions....

88

General Education GENERAL EDUCATION  

E-Print Network [OSTI]

, the pursuit of truth, the intellectual and ethical development of students, and the general well the consequences of human actions. E. Cross-Cultural Awareness Demonstrate the ability to critically compare

Stuart, Steven J.

89

INDUSTRIAL LITERATURE  

Science Journals Connector (OSTI)

Anionic Surfactants. Features, properties, and applications of the Igepon series of anionic surfactants which have found use in textile wet processing, detergents, cosmetics, and agricultural chemicals. Bulletin 10M-7-58. GENERAL ANILINE & FILM CORP. ...

1958-10-13T23:59:59.000Z

90

Coal industry annual 1993  

SciTech Connect (OSTI)

Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

Not Available

1994-12-06T23:59:59.000Z

91

Mechanical & Industrial Engineering  

E-Print Network [OSTI]

Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

Mountziaris, T. J.

92

Industry Perspective  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

idatech.com idatech.com info@idatech.com 63065 NE 18 th Street Bend, OR 97701 541.383.3390 Industry Perspective Biogas and Fuel Cell Workshop National Renewable Energy Laboratory June 11 - 13, 2012 Mike Hicks Chairman of the Board of Directors, FCHEA Treasurer of the Board of Directors, FCS&E Engineering Manager, Technology Development & Integration, IdaTech Outline 1. Critical Factors * Fuel Purity * Fuel Cost 2. Natural Gas - The Wild Card & Competition 3. IdaTech's Experience Implementing Biofuel Critical Factor - Fuel Purity All fuel cell system OEMs have fuel purity specifications * Independent of * Raw materials or feed stocks * Manufacturing process * Depends on * Fuel processor technology * Fuel cell technology - low temp PEM versus SOFC

93

Coal Industry Annual 1995  

SciTech Connect (OSTI)

This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

NONE

1996-10-01T23:59:59.000Z

94

Engineering Industrial & Systems  

E-Print Network [OSTI]

Industrial Engineering Department of Industrial & Systems Engineering Leslie Monplaisir, Ph powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I is available at: http://ise.wayne.edu/bs-industrial/index What is Industrial Engineering? The industrial

Berdichevsky, Victor

95

INDUSTRIAL ENGINEERING Industrial engineering is concerned  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

96

INDUSTRIAL ENGINEERING Industrial engineering is concerned  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

97

A Generalized Pyrolysis Model for Combustible Solids  

E-Print Network [OSTI]

processes of wood and biomass pyrolysis, to appear ineffect during biomass pyrolysis, Industrial & Engineeringprocesses during pyrolysis of a large biomass particle,

Lautenberger, Chris

2007-01-01T23:59:59.000Z

98

A study of the foundry industry dynamics/  

E-Print Network [OSTI]

In the process of industrial evolution, it is a general tendency that companies which specialize in a specific value chain have emerged. These companies should construct a business eco-system based on their own platform ...

Oh, Sang Jin

2010-01-01T23:59:59.000Z

99

Research and Development in British Industry  

Science Journals Connector (OSTI)

... organization of basic research for the British chemical industry was followed in May by Sir Ronald Holroyd's Brotherton Memorial Lecture to the same Society at Leeds, in which he ... of Technology and of Britain's economic situation generally.

1965-10-09T23:59:59.000Z

100

Energy Recovery in Industrial Distillation Processes  

E-Print Network [OSTI]

ENERGY RECOVERY IN INDUSTRIAL DISTILLATION PROCESSES Duane B. Paul General Electric Company Fitchburg, Massachusetts ABSTRACT Overhead separati on processes whi ch present attracti ve Distillation processes are energy intensive Condenser...

Paul, D. B.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Industrial User Office | Advanced Photon Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Liaison Office Industrial Liaison Office Industrial Liaison Office registration page New to Synchrotron Radiation New to the APS Already a User Advanced Photon Source Industrial Liaison Office Welcome to the Advanced Photon Source (APS) Industrial Liaison Office home page. The purpose of this Office is to provide outreach from the APS to the industrial community. As we develop the Office and this website to better address the needs of industrial users of the APS, both current and prospective, we are soliciting input by requesting projects and measurements that you would like to perform at the APS. Please complete the form below so that we can begin communicating with you. Questions? Email aps-i@aps.anl.gov. General Information Company Name *required First Name *required Last Name *required

102

Recovery and Recycling of Industrial Wastewater by Hybrid Processes  

Science Journals Connector (OSTI)

Modern industries demand large quantities of water at purity levels that are unprecedented in industrial applications. Unless water usage is changed, these processes will not be sustainable. The key solution to r...

Farhang Shadman

2013-01-01T23:59:59.000Z

103

CHAPTER 12 - Source Data for the Manufacturing, Processing, and Mining Industries  

Science Journals Connector (OSTI)

Publisher Summary This chapter provides an overview of the source data for the manufacturing, processing, and mining industries. The manufacturing sector is divided into a number of sectors for the purposes of input-output and may or may not include intermediate processing industries. In many developing countries, industries processing raw materials are the major part of this section of the economy, and final manufacturing industries may be few in number and type. Whatever method of classification is used, the general remarks on source data that follow is applied. Although both large and small businesses usually exist in manufacturing and processing, each industry is often dominated either by large or small businesses. One of the main sources of data is of tax returns for the larger businesses. No difficulty is experienced in obtaining grouped data processed in the taxation department which, when they reach the national income statistician, is in the form of a balancing account for the aggregate businesses covered. As with other sectors, it is important to obtain details of coverage in terms of the number of firms, physical output, or any other information that indicates what proportion of the industry is covered by these accounts.

CARLEEN O'LOUGHLIN

1971-01-01T23:59:59.000Z

104

Meeting State Carbon Emission Requirements through Industrial Energy Efficiency: The Southern California Gas Companys Industrial End User Program  

Broader source: Energy.gov [DOE]

This case study describes the Southern California Gas Companys Industrial End User program, which helps large industrial customers increase energy efficiency and reduce energy use and greenhouse gas emissions.

105

The Texas Retail Meat Industry -- Structure, Operational Characteristics, and Competitive Practices.  

E-Print Network [OSTI]

in refrigeration and transportation systems, general usage of federal grading standards, and rigid specifi- cations standards have allowed retail organizations to purchase and dis- tribute consistent quality meat items over a larger geographic area... red meat sold by retailers in Texas during 1974. The Texas retail meat industry is characterized by large, diversi- fied supermarkets which feature mass selling techniques and merchandise meat products on a strict specification basis. In 1974...

Dietrich, Raymond A.

1975-01-01T23:59:59.000Z

106

and Industrial Engineering  

E-Print Network [OSTI]

45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle to prosthetic limbs to windmills, and their myriad components. Industrial engineers are concerned

Mountziaris, T. J.

107

Industrial and Systems engineering  

E-Print Network [OSTI]

Industrial and Systems engineering COLLEGE of ENGINEERING DepartmentofIndustrialandSystemsEngineering EDGE Engineering Entrepreneur Certificate Program is a great addition to an industrial and systems to expert clinical recommendations. engineering.wayne.edu/isefaculty Industrial and systems engineering

Berdichevsky, Victor

108

Commentary on industrial processes  

Science Journals Connector (OSTI)

...crucial for an industrial process, namely: catalyst activity...of catalysis to industrial processes. The papers, however, do...at the heart of successful commercialization of catalytic science and technology...addressed in any industrial process, namely: activity-the...

2005-01-01T23:59:59.000Z

109

Lincoln Electric System (Commercial and Industrial) - Sustainable Energy  

Broader source: Energy.gov (indexed) [DOE]

Commercial and Industrial) - Sustainable Commercial and Industrial) - Sustainable Energy Program Lincoln Electric System (Commercial and Industrial) - Sustainable Energy Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Manufacturing Home Weatherization Commercial Weatherization Sealing Your Home Ventilation Construction Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate '''General Incentive Limits''' Commercial Industrial Lighting Retrofit: $100,000 per program year Commercial and Industrial Energy Efficiency: $100,000 per program year Program Info State Nebraska Program Type Utility Rebate Program Rebate Amount Commercial Industrial Lighting Retrofit Lighting Retrofit: $500/kW of peak-demand reduction

110

Evaluating Sites for Industrial Cogeneration in Chicago  

E-Print Network [OSTI]

and hospital complexes; and new, densely populated residential developments that have large thermal and electric demands. Potential sites have been evaluated as part of a project to encourage industrial cogeneration applications in Chicago. Energy...

Fowler, G. L.; Baugher, A. H.

1982-01-01T23:59:59.000Z

111

Uranium industry annual 1997  

SciTech Connect (OSTI)

This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

NONE

1998-04-01T23:59:59.000Z

112

Barron Electric Cooperative - Commercial, Industrial, and Agricultural  

Broader source: Energy.gov (indexed) [DOE]

Barron Electric Cooperative - Commercial, Industrial, and Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program < Back Eligibility Agricultural Commercial Industrial Savings Category Other Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Commercial Lighting Lighting Manufacturing Maximum Rebate $10,000 per account, not to exceed 20% of cost Scroll Refrigeration Compressors: $500 Variable Speed/Frequency Drive Motor: $500 Variable Speed Compressed Air Motor: $500 Energy Audit: One in Five Years Program Info State Wisconsin Program Type Utility Rebate Program Rebate Amount Energy Audit: Free General Lighting: $1 - $15/unit LED Lamps: $2/bulb

113

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Demand Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Demand Module calculates energy consumption for the four Census Regions (see Figure 5) and disaggregates the energy consumption

114

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Module calculates

115

general_atomics.cdr  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

former former General Atomics Hot Cell Facility was constructed in 1959 and operated until 1991. The site encompassed approximately 7,400 square feet of laboratory and remote operations cells. Licensed operations at the facility included receipt, handling, and shipment of radioactive materials; remote handling, examination, and storage of previously irradiated nuclear fuel materials; pilot-scale tritium extraction operations; and development, fabrication, and inspection of uranium oxide-beryllium oxide fuel materials. General Atomics performed most of the work for the federal government. The General Atomics Hot Cell Facility was located in a 60-acre complex 13 miles northwest of downtown San Diego, 1 mile inland from the Pacific Ocean, and approximately 300 feet above sea level. The General Atomics site is in the center of Torrey Mesa Science Center, a 304-acre industrial

116

The future steelmaking industry and its technologies  

SciTech Connect (OSTI)

The objective of this report is to develop a vision of the future steelmaking industry including its general characteristics and technologies. In addition, the technical obstacles and research and development opportunities for commercialization of these technologies are identified. The report is being prepared by the Sloan Steel Industry Competitiveness Study with extensive input from the industry. Industry input has been through AISI (American Iron and Steel Institute), SMA (Steel Manufacturers Association) and contacts with individual company executives and technical leaders. The report identifies the major industry drivers which will influence technological developments in the industry for the next 5--25 years. Initially, the role of past drivers in shaping the current industry was examined to help understand the future developments. Whereas this report concentrates on future technologies other major factors such as national and international competition, human resource management and capital concerns are examined to determine their influence on the future industry. The future industry vision does not specify specific technologies but rather their general characteristics. Finally, the technical obstacles and the corresponding research and development required for commercialization are detailed.

Fruehan, R.J.; Paxton, H.W.; Giarratani, F.; Lave, L. [Carnegie-Mellon Univ., Pittsburgh, PA (United States)]|[Pittsburgh Univ., PA (United States)

1995-01-01T23:59:59.000Z

117

Zoe Industries, Inc.  

Broader source: Energy.gov (indexed) [DOE]

Issued: February 9, 2012 Issued: February 9, 2012 BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2011-SW-2912 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Zoe Industries, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated against Respondent pursuant to 10 C.F.R. § 429.122 by Notice of Proposed Civil Penalty, alleging that Respondent distributed in commerce in the United States the Giessdorf eight-jet basic model showerhead, SKU 150043, which failed to meet the applicable standard for water usage. See 10 C.F.R. § 430.32(p). 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement

118

Seismic Evaluation and Performance Enhancement of Industrial Storage Racks.  

E-Print Network [OSTI]

??The use of industrial storage racks in large warehouse stores and the publics direct access to merchandise on these racks has significantly increased over the (more)

Gao, Yuan

2013-01-01T23:59:59.000Z

119

INDUSTRIAL ENGINEERING GRADUATE PROGRAMS  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor of Philosophy in Systems and Engineering Management programs prepare competent industrial engineers

Gelfond, Michael

120

Mechanical & Industrial Engineering  

E-Print Network [OSTI]

Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board May 5th, 2011 #12;Mechanical & Industrial Engineering 2 IAB 2010-2011 · David K. Anderson ­ Alden Research Laboratory, Inc went on for three weeks Mechanical & Industrial Engineering 6 #12;Reza Shahbazian Yassar Mechanical

Mountziaris, T. J.

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Career Map: Industrial Engineer  

Broader source: Energy.gov [DOE]

The Wind Program's Career Map provides job description information for Industrial Engineer positions.

122

Climate VISION: Industry Associations  

Office of Scientific and Technical Information (OSTI)

Industry Associations Industry Associations Aluminum Aluminum Association (Coordinating aluminum industry Climate VISION activities) The Aluminum Association, Inc. is the trade association for producers of primary aluminum, recyclers and semi-fabricated aluminum products, as well as suppliers to the industry. The Association provides leadership to the industry through its programs and services which aim to enhance aluminum's position in a world of proliferating materials, increase its use as the "material of choice," remove impediments to its fullest use, and assist in achieving the industry's environmental, societal, and economic objectives. Automobile Manufacturers Alliance of Automobile Manufacturers (Coordinating automobile industry Climate VISION activities) The Alliance of Automobile Manufacturers, Inc. is a trade association

123

Empirical Regularities of Asymmetric Pricing in the Gasoline Industry  

E-Print Network [OSTI]

Empirical Regularities of Asymmetric Pricing in the Gasoline Industry Marc Remer August 2, 2010 pricing in the retail gasoline industry, and also documents empirical regularities in the market. I find of asymmetric price movements in the retail gasoline industry. Yet, there is no general agreement as to whether

Niebur, Ernst

124

NETL: Industrial Capture & Storage Area 2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 2 Technologies Industrial Capture & Storage Area 2 Innovative Concepts for Beneficial CO2 Use The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL, or DOE) is currently implementing a program titled "Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO2 Use." This CO2 Capture and Sequestration (CCS) and CO2 use program is a cost-shared collaboration between the Government and industry whose purpose is to increase investment in clean industrial technologies and sequestration projects. In accordance with the American Recovery and Reinvestment Act of 2009, and Section 703 of Public Law 110-140, DOE's two specific objectives are to demonstrate: (1) Large-Scale Industrial CCS projects from industrial sources, and (2) Innovative Concepts for beneficial CO2 use.

125

Global Industry Analysts | Open Energy Information  

Open Energy Info (EERE)

Global Industry Analysts Global Industry Analysts Jump to: navigation, search Name Global Industry Analysts Address 6150 Hellyer Avenue Place San Jose, California Zip 95138 Product Market research services Year founded 1987 Number of employees 501-1000 Phone number (408) 528-9966 Website http://www.strategyr.com/ Region Bay Area References Global Industry Analysts[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Global Industry Analysts Global Industry Analysts, Inc., (GIA) offers one of the world's largest portfolios of research reports in terms of topics covered, geographic regions analyzed, companies profiled, and pages published. The company's current portfolio consists of more than 900 Global Strategic Business Reports (large multi-client research programs); 45,000+ Market Trend

126

Standards Development and Deployment of a Comprehensive, Integrated, Open-standard Monitoring and Equipment Control Networking Protocol Infrastructure for Effective Facility Energy Management of a Large-scale Industrial Site in Alberta, Canada  

E-Print Network [OSTI]

: Implement control networking interoperability standards Enforce standards compliance Work with vendors to deliver more cost effective solutions Develop Suncor specific LonMark equipment profiles ESL-IE-14-05-27 Proceedings of the Thrity..., ISO, ANSI/CEA, LONMARK ISO 14908 and ANSI/CEA 709.1 Standards - Local Operating Network (LON) for Building Automation Control Systems Large certified product availability Worldwide standard, worldwide support Well defined interoperability...

Bernstein, R.

2014-01-01T23:59:59.000Z

127

" by Census Region, Census Division, Industry Group, Selected Industries, and"  

U.S. Energy Information Administration (EIA) Indexed Site

Total Inputs of Energy for Heat, Power, and Electricity Generation" Total Inputs of Energy for Heat, Power, and Electricity Generation" " by Census Region, Census Division, Industry Group, Selected Industries, and" " Presence of General Technologies, 1994: Part 1" " (Estimates in Trillion Btu)" ,,,,"Computer Control" ,," "," ","of Processes"," "," ",," "," "," "," " ,," ","Computer Control","or Major",,,"One or More"," ","RSE",," " "SIC"," ",,"of Building","Energy-Using","Waste Heat"," Adjustable-Speed","General Technologies","None","Row"

128

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS 27 data.

129

Industrial Carbon Capture Project Selections  

Broader source: Energy.gov (indexed) [DOE]

(Partner Organizations) Funding Lead Organization Location (City, State) Project Title - Project Description 1) Large Scale Testing of Advanced Gasification Technologies Air Products & Chemicals, Inc. $71,700,000 Allentown, PA Development of ITM Oxygen Technology for Integration with Advanced Industrial Systems Air Products will accelerate commercial manufacture of ion transport membranes modules and initiate the development a 2,000 TPD pre- commercial scale facility ahead of schedule, enabling this technology

130

Industrial energy-efficiency-improvement program  

SciTech Connect (OSTI)

Progress made by industry toward attaining the voluntary 1980 energy efficiency improvement targets is reported. The mandatory reporting population has been expanded from ten original industries to include ten additional non-targeted industries and all corporations using over one trillion Btu's annually in any manufacturing industry. The ten most energy intensive industries have been involved in the reporting program since the signing of the Energy Policy and Conservation Act and as industrial energy efficiency improvement overview, based primarily on information from these industries (chemicals and allied products; primary metal industry; petroleum and coal products; stone, clay, and glass products; paper and allied products; food and kindred products; fabricated metal products; transportation equipment; machinery, except electrical; and textile mill products), is presented. Reports from industries, now required to report, are included for rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products. Additional data from voluntary submissions are included for American Gas Association; American Hotel and Motel Association; General Telephone and Electronics Corporation; and American Telephone and Telegraph Company. (MCW)

Not Available

1980-12-01T23:59:59.000Z

131

Gas turbine considerations in the pulp and paper industry  

SciTech Connect (OSTI)

The pulp and paper industry is one of the largest users of energy in the industrial arena, requiring large quantities of process steam and electrical energy per unit of production. Developing power generation as an integral part of its power plant systems is one way for the industry to meet these requirements. Gas turbine-based cogeneration systems can also be a desirable approach. In recent years, competitive pressures, environmental concerns, the cost and availability of various fuels, and new power generation opportunities have awakened interest in power generation in the pulp and paper industry and other industries. This paper provides a strategic review of these issues of the pulp and paper industry.

Anderson, J.S. (International Paper Co., Purchase, NY (US)); Kovacik, J.M. (GE Co., Schenectady, NY (US))

1991-03-01T23:59:59.000Z

132

Nevada National Security Site Industrial Sites Project Closeout - 12498  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office is responsible for environmental restoration (ER) at the Nevada National Security Site (NNSS). This includes remediation at Industrial Sites where past nuclear testing activities and activities that supported nuclear testing may have or are known to have resulted in the release of contaminants into the environment. Industrial Sites at the NNSS have included nuclear facilities that supported the nuclear rocket/missile development programs, gas stations, landfills, spill sites, ordnance sites, and numerous other waste disposal and release sites. The NNSS Industrial Sites activities neared completion at the end of fiscal year 2011 while other activities required under the Federal Facility Agreement and Consent Order (FFACO) and part of the same NNSS ER Project are forecasted to extend to 2027 or beyond. With the majority of Industrial Sites corrective action units (CAUs) completed (more than 250 CAUs and over 1,800 corrective action sites), it was determined that an activity closeout process should be implemented to ensure that the work completed over the past 15 years is well documented in a comprehensive and concise summary. While the process used to close each individual CAU is described in approved documents, no single document describes in summary fashion the work completed to close the many individual Industrial Sites. The activity closeout process will be used to develop an Industrial Sites closeout document that describes these years of work. This document will summarize the number of Industrial Sites closed under the FFACO and provide general descriptions of projects, contaminants removed, and sites closed in place with corresponding Use Restrictions. Other pertinent information related to Industrial Sites work such as the project history, closure decisions, historical declarations, remediation strategies, and final CAU status will be included in the closeout document, along with a table listing each CAU and corresponding corrective action sites within each CAU. Using this process of conducting the activity closeout and developing a closeout document may prove useful for other ER projects within the DOE complex in describing how a long period of ER can be summarized in a single document. The NNSS Industrial Sites activities were completed over the span of 15 years and involved the investigation, cleanup or Use Restriction, and closure of more than 260 CAUs and over 1,800 sites. These activities will conclude in FY 2012 (with the exception of one CAU). In order to capture the work completed over this length of time and document decisions made during the activities, a closeout effort was initiated. The closeout will review the work conducted during the Industrial Sites activities and produce a single document that summarizes Industrial Sites activities. This closeout is being conducted at an interim stage in the overall NNSA/NSO ER Project since the Soils and UGTA activities will continue for a number of years, but the completion of the Industrial Sites project warrants conducting a closeout now while personnel are available and information is still current. The process followed by NNSA/NSO in conducing project closeout for the Industrial Sites portion of the ER program may prove useful within the DOE complex in demonstrating how a large ER project can be summarized. (authors)

Cabble, Kevin [U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Las Vegas, Nevada 89193 (United States); Krauss, Mark [S.M. Stoller for Navarro-Intera, LLC, Las Vegas, Nevada 89193 (United States); Matthews, Pat [Navarro-Intera, LLC, Las Vegas, Nevada 8919 (United States)

2012-07-01T23:59:59.000Z

133

General Thermodynamics  

Science Journals Connector (OSTI)

... principally in the Journal of the Franklin Institute. These ideas relate to a study of thermodynamics from what the author calls a generalized point of view, which concerns itself with ... from what the author calls a generalized point of view, which concerns itself with the thermodynamics of metastable states and irreversible processes as wall as with the stable states and reversible ...

R. W. HAYWOOD

1956-06-02T23:59:59.000Z

134

Industry 4.0  

Science Journals Connector (OSTI)

Industry is the part of an economy that produces material goods which are highly mechanized and automatized. Ever since the beginning of industrialization, technological leaps have led to paradigm shifts which to...

Dr. Heiner Lasi

2014-08-01T23:59:59.000Z

135

Chemistry Industry in Egypt  

Science Journals Connector (OSTI)

Chemistry Industry in Egypt ... FROM antiquity the Egyptian economy has been predominately agricultural. ... Nevertheless, it is most probable that the ancient Egyptians were the world's first practical or industrial chemists. ...

1953-08-10T23:59:59.000Z

136

INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY  

E-Print Network [OSTI]

INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

Pohl, Karsten

137

Industrial Green | Jefferson Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Green Industrial Green - This giant bag may not look green, but it keeps a potent greenhouse gas from being released into the atmosphere. It's part of a system at the...

138

The Industrial Electrification Program  

E-Print Network [OSTI]

EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

Harry, I. L.

1982-01-01T23:59:59.000Z

139

Systems and Industry Analyses  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

systems and industry analyses News Gasifipedia Gasifier Optimization Feed Systems Syngas Processing Systems Analyses Gasification Plant Databases International Activity Program...

140

Geothermal Industry Partnership Opportunities  

Broader source: Energy.gov [DOE]

Here you'll find links to information about partnership opportunities and programs for the geothermal industry.

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Photovoltaics industry profile  

SciTech Connect (OSTI)

A description of the status of the US photovoltaics industry is given. Principal end-user industries are identified, domestic and foreign market trends are discussed, and industry-organized and US government-organized trade promotion events are listed. Trade associations and trade journals are listed, and a photovoltaic product manufacturers list is included. (WHK)

None

1980-10-01T23:59:59.000Z

142

Mechanical & Industrial Engineering  

E-Print Network [OSTI]

Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

Mountziaris, T. J.

143

INDUSTRIAL AND BIOMEDICAL APPLICATIONS  

E-Print Network [OSTI]

INDUSTRIAL AND BIOMEDICAL APPLICATIONS Frank Smith, Nicholas Ovenden and Richard Purvis University are described, one industrial on violent water-air interaction during an impact process and the other biomedical: industrial, biomedical, impacts, networks, theory, computation, scales. 1. INTRODUCTION It is a pleasure

Purvis, Richard

144

The US coal industry 1996  

SciTech Connect (OSTI)

Several years ago a friend and former classmate, Dr. Doug Dahl, put the coal industry into perspective. At that time he worked for Consol, whose parent company was DuPont. I will use his story, but update it with today`s statistics. As can be seen in Figure 1, total US coal production continues to show healthy growth. In 1995 we produced 1,032,000,000 tons, and 1,046,000,000 tons are projected for 1996. Unfortunately as seen in Figure 2, the average price per ton of coal sold is still dropping. The coal industry is experiencing the unusual situation of falling coal prices with increasing coal demand! In 1994 (1995 data not available) the average price for a ton of coal was only $19.41. Multiplying the two numbers, yields the total sales value for our entire industry, $20.1 billion in 1994. That`s roughly half the approximately $40 billion per year sales value for a single chemical company, DuPont, Dr. Dahl`s parent company. As Dr. Dahl pointed out, the coal industry just isn`t that big. As we can see in Figure 3, the yearly trends show that the total value of the US coal production is shrinking. The total value has fallen through the 90`s and follows the average price per ton trend. Even increases in production have generally not been enough to offset the falling prices.

Campbell, J.A.L. [Custom Coals International, Inc., Oklahoma City, OK (United States)

1996-12-31T23:59:59.000Z

145

OLEDS FOR GENERAL LIGHTING  

SciTech Connect (OSTI)

The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescence source and with an efficacy comparable to that of an incandescent source. it was recognized that achieving this would require significant advances in three area: (1) the improvement of white light quality for illumination, (2) the improvement of OLED energy efficiency at high brightness, and (3) the development of cost-effective large area fabrication techniques. The program was organized such that, each year, a ''deliverable'' device would be fabricated which demonstrated progress in one or more of the three critical research areas. In the first year (2001), effort concentrated on developing an OLED capable of generating high illumination-quality white light. Ultimately, a down-conversion method where a blue OLED was coupled with various down-conversion layers was chosen. Various color and scattering models were developed to aid in material development and device optimization. The first year utilized this approach to deliver a 1 inch x 1 inch OLED with higher illumination-quality than available fluorescent sources. A picture of this device is shown and performance metrics are listed. To their knowledge, this was the first demonstration of true illumination-quality light from an OLED. During the second year, effort concentrated on developing a scalable approach to large area devices. A novel device architecture consisting of dividing the device area into smaller elements that are monolithically connected in series was developed. In the course of this development, it was realized that, in addition to being scalable, this approach made the device tolerant to the most common OLED defect--electrical shorts. This architecture enabled the fabrication of a 6 inch x 6 inch OLED deliverable for 2002. A picture of this deliverable is shown and the performance metrics are listed. At the time, this was the highest efficiency, highest lumen output illumination-quality OLED in existence. The third year effort concentrated on improving the fabrication yield of the 6 inch x 6 inch devices and improving the underlying blue device efficiency. An efficiency breakthrough was achieved through the invention of a new device structure such that now 15 lumen per watt devices could be fabricated. A 2 feet x 2 feet OLED panel consisting of sixteen 6 inch x 6 inch high efficiency devices tiled together was then fabricated. Pictures of this panel are shown with performance metrics listed. This panel met all project objectives and was the final deliverable for the project. It is now the highest efficiency, highest lumen output, illumination-quality OLED in existence.

Anil Duggal; Don Foust; Chris Heller; Bill Nealon; Larry Turner; Joe Shiang; Nick Baynes; Tim Butler; Nalin Patel

2004-02-29T23:59:59.000Z

146

Energy Audit of an Industrial Site: A Case Study  

Science Journals Connector (OSTI)

Abstract In order to reduce energy consumptions for sustainable and energy-efficient manufacturing, continuous energy audit and process tracking of industrial machines are essential. Compared to other non-residential buildings that have been widely researched, industrial buildings are generally characterized by larger thermal loads, ventilation losses and pollution control requirements. This paper presents the results of a preliminary energy audit carried out on 8 large industrial buildings of a famous car manufacturing holding in Italy. Energy demand for heating varied from 6 to just over 74 kWh/m3year among the buildings of the site. The energy audit enabled to build a specific factory energy model which has been used in order to analyze the impact of various energy saving actions on the primary energy consumptions of the site. It has been demonstrated that in this specific case the improvement of the building envelopes and the optimization of the performances of the existing HVAC systems can determine a reduction of gas consumption up to 15% per year with a predicted annual economic saving of the order of 100000 ; the total simple pay-back time of the proposed thermal retrofitting is evaluated to be less than 6 years

Matteo Dongellini; Cosimo Marinosci; Gian Luca Morini

2014-01-01T23:59:59.000Z

147

Industry - ORNL Neutron Sciences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industry banner Industry banner Neutron scattering research has applications in practically every field, and neutron research at ORNL is leading to productive partnerships with the industrial and business communities. We welcome proposals for all types of research, including those involving proprietary work. Recent studies have led to discoveries with potential applications in fields such as medicine, energy, and various metals technologies. For more information, please see our recent research highlights. Research Collaborations Industry-Driven Research Benefits Plastics Manufacturing Corning uses VULCAN to test limits of ceramic material for car emission controls, filtration devices Neutrons Probe Inner Workings of Batteries Industry and Neutron Science: Working To Make a Match

148

Interacting With the Pharmaceutical Industry  

E-Print Network [OSTI]

INTERACTING WITH THE PHARMACEUTICAL INDUSTRY Stephen R.to interactions with the pharmaceutical industry! This is ancome from the pharmaceutical industry. It is also reality

Hayden, Stephen R

2003-01-01T23:59:59.000Z

149

Benteler Industries | Open Energy Information  

Open Energy Info (EERE)

Industries Jump to: navigation, search Name: Benteler Industries Place: Grand Rapids, MI Website: http:www.bentelerindustries. References: Benteler Industries1 Information...

150

LANSCE | Lujan Center | Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Users The Lujan Neutron Scattering Center offers a diverse set of capabilities and instruments for industrial projects. Industrial users are invited to contact the Lujan...

151

Fact Sheet for Industrial Facilities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for Industrial Facilities May 2012 Overview Public utilities in the Pacific Northwest serve more than 2,200 megawatts of industrial load, making industrial sector users a vitally...

152

Implications for decision making: Industrial sector perspectives  

SciTech Connect (OSTI)

Implications for decision making in areas related to policy towards greenhouse gas emissions are discussed from the perspective of the industrial sector. Industry is presented as supportive of energy conservation measures in spite of the large uncertainties in the global warming issue. Perspectives of developed and developing countries are contrasted, and carbon dioxide emissions are compared. Socioeconomic implications of reducing greenhouse gas emissions, particularly in the form of higher prices for goods and services, are outlined.

Mangelsdorf, F.E. [Texaco, Inc., Beacon, NY (United States)

1992-12-31T23:59:59.000Z

153

Uranium industry annual 1998  

SciTech Connect (OSTI)

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

NONE

1999-04-22T23:59:59.000Z

154

Uranium industry annual 1994  

SciTech Connect (OSTI)

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

NONE

1995-07-05T23:59:59.000Z

155

INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

Rohs, Remo

156

NETL: Industrial Capture and Storage (ICCS): Area 1  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ICCS Area 1 ICCS Area 1 Major Demonstrations Industrial Capture and Storage (ICCS): Area 1 The Large-Scale Industrial CCS Projects (Area 1) are managed by NETL under the Major Demonstrations Program. In October 2009, the U.S. Department of Energy announced the selection of 12 Large-Scale projects intended to capture CO2 from industrial sources for storage or beneficial use. Read more! These Phase I projects were cost-shared collaborations between the government and industry to increase investment in clean industrial technologies and sequestration projects. The Phase I duration of each project selected was approximately seven months. On June 10, 2010, DOE selected three projects from Phase I to enter into Phase 2 for design, construction, and operation. Potential additional applications for funding of large-scale industrial carbon capture and storage projects are pending further clarification and review. Collapse Text

157

PSNH- Large Business Energy Efficiency Retrofit Rebate Program  

Broader source: Energy.gov [DOE]

Public Service of New Hampshire (PSNH), in collaboration with [http://www.nhsaves.com/ nhsaves], encourages large commercial and industrial customers in existing facilities to conserve energy...

158

Apparatus and Method for Rapid Cooling of Large Area Substrates...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Part of a large thin film device manufacturing portfolio Applications and Industries Thin film solar photovoltaics Other thin film technologies Patents and Patent Applications ID...

159

Hazardous and Industrial Waste (Minnesota) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Hazardous and Industrial Waste (Minnesota) Hazardous and Industrial Waste (Minnesota) Hazardous and Industrial Waste (Minnesota) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Program Info State Minnesota Program Type Siting and Permitting This section describes standards that must be met by facilities generating and processing hazardous and industrial waste, as well as required permits for the construction and operation of such a facility. The statute also

160

The Industrial Machinery Tax Credit (Tennessee) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Industrial Machinery Tax Credit (Tennessee) Industrial Machinery Tax Credit (Tennessee) The Industrial Machinery Tax Credit (Tennessee) < Back Eligibility Agricultural Commercial Construction Developer Fuel Distributor General Public/Consumer Industrial Installer/Contractor Investor-Owned Utility Municipal/Public Utility Rural Electric Cooperative Systems Integrator Transportation Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Tennessee Program Type Corporate Tax Incentive Provider Tennessee Department of Economic and Community Development The Industrial Machinery Tax Credit provides tax savings from equipment investments dependent upon the size investment made during the period. To qualify for this credit, companies are not required to create new jobs.

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Design of industrial ventilation systems  

SciTech Connect (OSTI)

This latest edition has a title change to reflect an expansion to cover the interrelated areas of general exhaust ventilation and makeup air supply. More coverage is also given the need for energy conservation and for the physical isolation of the workspace from major contaminant generation zones. Excellent and generous illustrative matter is included. Contents, abridged are as follows: flow of fluids; air flow through hoods; pipe resistance; piping design; centrifugal exhaust fans; axial-flow fans; monitoring industrial ventilization systems; isolation; and energy conservation.

Alden, J.L.; Kane, J.M.

1982-01-01T23:59:59.000Z

162

General Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ASD General Information ASD General Information APS Resources & Information A list of useful links for APS staff and users. APS Technical Publications Links to APS technical publications. APS Publications Database The official and comprehensive source of references for APS-related journal articles, conference papers, book chapters, dissertations, abstracts, awards, invited talks, etc. Image Library A collection of APS images. Responsibilities & Interfaces for APS Technical Systems Descriptions of the responsibilities of APS technical groups and how they interface with one another. APS Procedures Operational procedures for the APS. APS Specifications Specifications and approvals for upgrades or changes to existing APS hardware and software. APS Radiation Safety Policy & Procedures Committee Minutes

163

Industrial | OpenEI  

Open Energy Info (EERE)

Industrial Industrial Dataset Summary Description The Industrial Assessment Centers (IAC) Database is a collection of all the publicly available data from energy efficiency assessments conducted by IACs at small and medium-sized industrial facilities. Source Department of Energy Industrial Assessment Centers Date Released September 20th, 2012 (2 years ago) Date Updated September 20th, 2012 (2 years ago) Keywords assessment energy efficiency Industrial manufacturing small and medium-sized Data application/vnd.ms-excel icon copy_of_iac_database.xls (xls, 28.7 MiB) Quality Metrics Level of Review Standards Comment Temporal and Spatial Coverage Frequency Daily Time Period License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset

164

Electrotechnologies in Process Industries  

E-Print Network [OSTI]

Processes Motor drives are mainly used in prime movers (pumps, fans, compressors, etc.) and in materials processing and handling (grinders, conveyors, etc.). EPRI develops and promotes technologies such as industrial heat pumps, freeze concentra tion... the need to disseminate the results of its research and development so that they can be applied broadly across the industrial sector. Specific technology transfer activities in process industries include: o Conferences and workshops o Tech...

Amarnath, K. R.

165

Industrial Energy Efficiency Assessments  

Broader source: Energy.gov (indexed) [DOE]

Energy Efficiency Energy Efficiency Assessments Lynn Price Staff Scientist China Energy Group Energy Analysis Department Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Industrial Energy Efficiency Assessments - Definition and overview of key components - International experience - Chinese situation and recommendations - US-China collaboration Industrial Energy Efficiency Assessments - Analysis of the use of energy and potential for energy efficiency in an industrial facility * Current situation * Recommendations for improving energy efficiency * Cost-benefit analysis of recommended options * An action plan for realizing potential savings Types of Industrial Energy Efficiency Assessments - Preliminary or walk-through - Detailed or diagnostic Audit criteria

166

Industrial Security Specialst  

Broader source: Energy.gov [DOE]

A successful candidate in this position will serve in a developmental capacity assisting senior specialists in carrying out a variety of industrial security and oversight functions.

167

Window industry technology roadmap  

SciTech Connect (OSTI)

Technology roadmap describing technology vision, barriers, and RD and D goals and strategies compiled by window industry stakeholders and government agencies.

Brandegee

2000-04-27T23:59:59.000Z

168

Commercial & Industrial Demand Response  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Resources News & Events Expand News & Events Skip navigation links Smart Grid Demand Response Agricultural Residential Demand Response Commercial & Industrial Demand Response...

169

An industrial policy  

Science Journals Connector (OSTI)

An industrial policy ... There are problems that are very much intertwined with national policy, but there are strengths, too, and they are worth noting. ...

1984-03-05T23:59:59.000Z

170

Industrial and Grid Security  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial and Grid Security Establishing resilient infrastructures that operate when sensors and physical assets are perturbed is an important national objective. Two related LDRD...

171

Entergy New Orleans - Small Commercial and Industrial Solutions Program |  

Broader source: Energy.gov (indexed) [DOE]

Entergy New Orleans - Small Commercial and Industrial Solutions Entergy New Orleans - Small Commercial and Industrial Solutions Program Entergy New Orleans - Small Commercial and Industrial Solutions Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Windows, Doors, & Skylights Maximum Rebate $50,000 or full cost of upgrade Program Info Funding Source New Orleans City Council State Louisiana Program Type Utility Rebate Program Rebate Amount Energy Assessment: Free Small Commercial Solutions Efficiency Improvements: $0.125 per kWh saved Large Commercial and Industrial Solutions Lighting Improvements: $0.10 per

172

Idle Industrial Sites Redevelopment (Wisconsin) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Idle Industrial Sites Redevelopment (Wisconsin) Idle Industrial Sites Redevelopment (Wisconsin) Idle Industrial Sites Redevelopment (Wisconsin) < Back Eligibility Developer Institutional Local Government Nonprofit State/Provincial Govt Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Wisconsin Program Type Grant Program Provider Wisconsin Economic Development Corporation The Idle Industrial Sites Redevelopment Program offers grants of up to $1,000,000 to Wisconsin communities for implementation of redevelopment plans for large industrial sites that have been idle, abandoned, or underutilized for a period of at least five years. Approved projects can use funds for demolition, environmental remediation, or site-specific

173

Energy efficiency for greenhouse gas emission reduction in China: The case of the cement industry  

SciTech Connect (OSTI)

A project at LBNL has combined two different approaches to investigate changes in efficiency in China`s cement industry, which currently accounts for over 6% of China`s total commercial energy use and over 1% of global carbon emissions. Cement output has doubled over the past five years, and will double again within 15 years. Addressing cement industry carbon emissions will be a key element of any program to control China`s carbon emissions. Macro-level analysis was used to investigate industry-wide trends, and detailed case studies of individual plants illuminated key issues in technology choice that fundamentally affect efficiency. In general, enterprises adopted technologies that increased output and improved quality, and had little regard for energy efficiency, though most new technologies and practices did improve efficiency. Changes in energy prices were a surprisingly weak factor in adoption of efficient technologies. Unexpectedly, many enterprises developed a strong preference for the least fuel-efficient technology, which allows power generation with kiln waste heat. This preference was motivated in a large part by the desire to achieve security in electricity supply, and by some reforms. This alternative has become increasingly popular, and threatens to reverse some progress made in reducing the carbon-intensiveness of China`s cement industry. Foreign technical assistance and more importantly, greater participation in China`s cement industry of foreign cement companies would speed the adoption of large scale very efficient precalciner plants. Paradoxically, improving energy efficiency in China`s cement industry is also a supply-side issue, improved reliability in China`s power network will make the more fuel-efficient alternative more attractive.

Sinton, J. [Lawrence Berkeley National Lab., Berkeley, CA (United States)

1996-12-31T23:59:59.000Z

174

Accrediting industrial safety training programs  

SciTech Connect (OSTI)

There are job-specific training requirements established by regulations that Impose stringent training requirements on a contractor, for example, the Occupational Safety & Health Act (OSHA). Failure to comply with OSHA training requirements can result in severe penalties being levied against a company. Although an accredited training program is expensive, it is a possible solution for minimizing risks associated with job-specific training requirements for employees. Operating DOE contractors direct approximately 10 percent of the operating funds toward training activities. Training needs for contractors span a broad range, from requirements awareness training for managers, to general training required on a one-time basis for all employees, to highly specialized training programs for employees involved In clean-up operations at hazardous waste sites. With this kind of an investment in training, it is logical to maximize the most return on an investment of training funds and to limit exposure to liability suits whenever possible. This presentation will provide an overview of accredited industrial safety programs. The criteria for accredited industrial safety programs will be defined. The question of whether accredited training programs are necessary will be examined. Finally, advantages and disadvantages will be identified for accrediting industrial safety training programs.

Beitel, L.

1992-12-31T23:59:59.000Z

175

Accrediting industrial safety training programs  

SciTech Connect (OSTI)

There are job-specific training requirements established by regulations that Impose stringent training requirements on a contractor, for example, the Occupational Safety Health Act (OSHA). Failure to comply with OSHA training requirements can result in severe penalties being levied against a company. Although an accredited training program is expensive, it is a possible solution for minimizing risks associated with job-specific training requirements for employees. Operating DOE contractors direct approximately 10 percent of the operating funds toward training activities. Training needs for contractors span a broad range, from requirements awareness training for managers, to general training required on a one-time basis for all employees, to highly specialized training programs for employees involved In clean-up operations at hazardous waste sites. With this kind of an investment in training, it is logical to maximize the most return on an investment of training funds and to limit exposure to liability suits whenever possible. This presentation will provide an overview of accredited industrial safety programs. The criteria for accredited industrial safety programs will be defined. The question of whether accredited training programs are necessary will be examined. Finally, advantages and disadvantages will be identified for accrediting industrial safety training programs.

Beitel, L.

1992-01-01T23:59:59.000Z

176

The Gas Industry  

Science Journals Connector (OSTI)

... the total output of towns' gas in Great Britain, distributes annually approximately as much energy as the whole of the electrical undertakings in the country. The industry has reason ... any actual thermal process, and the operations of the gas industry are not outside the ambit of the second law of thermodynamics, high though the efficiency of the carbonising process ...

J. S. G. THOMAS

1924-04-26T23:59:59.000Z

177

Growing Hawaii's agriculture industry,  

E-Print Network [OSTI]

Program Overview Growing Hawaii's agriculture industry, one business at a time Website: http-3547 agincubator@ctahr.hawaii.edu Grow Your Business If you are looking to start an agriculture-related business with our program · Positively impact the agriculture industry in Hawaii with their success

178

Conference on Industrial Physics  

Science Journals Connector (OSTI)

... THE first Conference on Industrial Physics to be held in Great Britain took place in Manchester under the ... auspices of the Institute of Physics on March 28-30. The subject chosen for the Conference was Vacuum Devices in Research and Industry, and its chief object was to ...

HERBERT R. LANG

1935-04-06T23:59:59.000Z

179

Industrial Optimization Compact Course  

E-Print Network [OSTI]

Industrial Optimization Compact Course and Challenge Workshop Optimization plays a crucial role of the processes are typically nonlinear and dyna- mic. Thus, complex dynamic optimization or optimal control in industrial optimization. February 17­20, 2014 ·9.00­17.00 IWR ·Im Neuenheimer Feld 368 ·69120 Heidelberg www

Kirches, Christian

180

Industrial electrotechnology development  

Science Journals Connector (OSTI)

New and improved industrial technologies have a tremendous role in enhancing productivity, minimising waste, reducing overall energy consumption, and mitigating environmental impacts. The electric utility industry plays a major role in developing these new and improved technologies. This paper describes several major advances and their potential impacts.

Clark W. Gellings

1997-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Japan's Rayon Industry  

Science Journals Connector (OSTI)

THE RAYON INDUSTRY of Japan has constantly expanded for the past eight years at a pace which has surpassed the development of all the other manufacturing industries of the Empire. At the end of 1926, the combined total output of rayon companies in this ...

KEHTI SISIDO

1934-08-10T23:59:59.000Z

182

Uranium industry annual 1993  

SciTech Connect (OSTI)

Uranium production in the United States has declined dramatically from a peak of 43.7 million pounds U{sub 3}O{sub 8} (16.8 thousand metric tons uranium (U)) in 1980 to 3.1 million pounds U{sub 3}O{sub 8} (1.2 thousand metric tons U) in 1993. This decline is attributed to the world uranium market experiencing oversupply and intense competition. Large inventories of uranium accumulated when optimistic forecasts for growth in nuclear power generation were not realized. The other factor which is affecting U.S. uranium production is that some other countries, notably Australia and Canada, possess higher quality uranium reserves that can be mined at lower costs than those of the United States. Realizing its competitive advantage, Canada was the world`s largest producer in 1993 with an output of 23.9 million pounds U{sub 3}O{sub 8} (9.2 thousand metric tons U). The U.S. uranium industry, responding to over a decade of declining market prices, has downsized and adopted less costly and more efficient production methods. The main result has been a suspension of production from conventional mines and mills. Since mid-1992, only nonconventional production facilities, chiefly in situ leach (ISL) mining and byproduct recovery, have operated in the United States. In contrast, nonconventional sources provided only 13 percent of the uranium produced in 1980. ISL mining has developed into the most cost efficient and environmentally acceptable method for producing uranium in the United States. The process, also known as solution mining, differs from conventional mining in that solutions are used to recover uranium from the ground without excavating the ore and generating associated solid waste. This article describes the current ISL Yang technology and its regulatory approval process, and provides an analysis of the factors favoring ISL mining over conventional methods in a declining uranium market.

Not Available

1994-09-01T23:59:59.000Z

183

Industry - ORNL Neutron Sciences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industry and Neutron Science Industry and Neutron Science Industry and Neutron Science: Working To Make a Match "In fundamental research, we want to know everything. Industry wants to know enough to answer a question." Research Contact: Mike Crawford September 2011, Written by Deborah Counce Mike Crawford and Souleymane Diallo Mike Crawford of Dupont (right) and Souleymane Diallo, instrument scientist for the Backscattering Spectrometer at SNS, prepare a material sample for an experiment on the instrument. Industrial users are starting to eye the potential of neutron science for solving problems that can't be solved in any other way. At the same time, the SNS and HFIR neutron science facilities at ORNL are exploring ways to woo such users and to make a match of it, to the benefit of both.

184

Uranium industry annual 1996  

SciTech Connect (OSTI)

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

NONE

1997-04-01T23:59:59.000Z

185

High Tech and Industrial Systems Group  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High Tech and Industrial Systems Group High Tech and Industrial Systems Group Some of the largest energy users in today's economy are high tech buildings and industrial systems. They operate up to 24 hours per day with energy intensities much greater than typical commercial or residential buildings, and they are essential to the national economy. High-tech buildings, such as laboratories, cleanrooms, data centers, and hospitals, are characterized by large base-loads, continuous operation, and high energy-use intensities. These buildings crosscut many industries and institutions. Group activities and products include: benchmarking surveys and metrics, case study reports, technology development, technology demonstrations, assessment and profiling tools, best practice guides, workshops, training guides, and development of other strategies.

186

Practical problems of programming in the large (PPPL)  

Science Journals Connector (OSTI)

Practical Problems of Programming in the Large are those issues that IT industry experiences today when working on large software systems or when integrating software within entire organisations. Relevant and current topics include Software Architecture, ...

Ralf Reussner; Wolfgang Weck

2004-06-01T23:59:59.000Z

187

Practical Problems of Programming in the Large (PPPL)  

Science Journals Connector (OSTI)

Practical Problems of Programming in the Large are those issues that IT industry experiences today when working on large software systems or when integrating software within entire organisations. Relevant and ...

Ralf Reussner; Wolfgang Weck

2005-01-01T23:59:59.000Z

188

Uranium industry annual 1995  

SciTech Connect (OSTI)

The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

NONE

1996-05-01T23:59:59.000Z

189

Posted 3/2/13 Medline Industries Industrial Engineer  

E-Print Network [OSTI]

Posted 3/2/13 Medline Industries ­ Industrial Engineer Medline Industries, Inc. has an immediate opening for an Industrial Engineer for our SPT Division located in Waukegan, IL. We are seeking a hard-working, detail-oriented professional with experience in industrial engineering and lean manufacturing within

Heller, Barbara

190

INDUSTRIAL&SYSTEMS Industrial and Systems engineers use  

E-Print Network [OSTI]

78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

Rohs, Remo

191

INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited Industrial and Systems Engineering Bachelor of Science 128 units Industrial and Systems Engineering

Rohs, Remo

192

INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

Rohs, Remo

193

THE INDUSTRIOUS REVOLUTION, THE INDUSTRIOUSNESS DISCOURSE, AND THE DEVELOPMENT OF MODERN ECONOMIES  

E-Print Network [OSTI]

modify the results. 10 Finally, there is also a fundamental problem with publications in the steam-press era (i.e. roughly after 1830). By allowing very large editions to be printed, it radically expanded the circulation and diffusion of some... the traditional meaning of luxury (hedonism) and industriousness. Desire could not be the real 20 engine of the sort continuous material progress he called luxury, for all worldly pleasures could eventually be satiated. On the contrary, he saw industriousness...

Litvine, Alexis D.

2014-05-08T23:59:59.000Z

194

Current Directions in Freight and Logistics Industry  

E-Print Network [OSTI]

Current Directions in Freight and Logistics Industry CTS Freight and Logistics Symposium November- the-box #12;Perspective Be sure to look-up from time-to-time #12;Why Discuss Freight and Logistics....Large Part of the Economy Logistics Cost As A Percent of GDP ­ 10% Source: CSCMP State of Logistics 2007 #12

Minnesota, University of

195

Entergy Arkansas - Commercial and Industrial Energy Efficiency Programs |  

Broader source: Energy.gov (indexed) [DOE]

Entergy Arkansas - Commercial and Industrial Energy Efficiency Entergy Arkansas - Commercial and Industrial Energy Efficiency Programs Entergy Arkansas - Commercial and Industrial Energy Efficiency Programs < Back Eligibility Agricultural Commercial Industrial Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Windows, Doors, & Skylights Maximum Rebate Feasibility Study: 25% of cost Program Info State Arkansas Program Type Utility Rebate Program Rebate Amount Small Business Energy Solutions (under 100kW): $0.21 - $0.50/kwh first year savings Large Commercial/Industrial (Prescriptive): $0.09/kwh first year savings Large Commercial/Industrial (Custom): $0.07 - $0.15/kwh first year savings

196

Carbon Capture and Storage from Industrial Sources | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Carbon Carbon Capture and Storage from Industrial Sources Carbon Capture and Storage from Industrial Sources In 2009, the industrial sector accounted for slightly more than one-quarter of total U.S. carbon dioxide (CO2) emissions of 5,405 million metric tons from energy consumption, according to data from DOE's Energy Information Administration. In a major step forward in the fight to reduce CO2 emissions from industrial plants, DOE has allocated Recovery Act funds to more than 25 projects that capture and sequester CO2 emissions from industrial sources - such as cement plants, chemical plants, refineries, paper mills, and manufacturing facilities - into underground formations. Large-Scale Projects Three projects are aimed at testing large-scale industrial carbon capture

197

Inspector General  

Broader source: Energy.gov (indexed) [DOE]

Office of the Under Secretary for Nuclear Security Edward B. Held (Acting) Under Secretary for Nuclear Security DEPARTMENT OF ENERGY Office of the Under Secretary for Management & Performance Vacant Under Secretary for Management and Performance Office of the Under Secretary for Science & Energy Vacant Under Secretary for Science and Energy Southwestern Power Administration Bonneville Power Administration Western Area Power Administration Southeastern Power Administration U.S. Energy Information Administration Loan Programs Office Advanced Research Projects Agency - Energy General Counsel Assistant Secretary for Congressional & Intergovernmental Affairs Chief Human Capital Officer

198

The Balance between Innovations and Risks in the LNG Industry  

Science Journals Connector (OSTI)

Since the sailing of the Methane Pioneer in January 1959, the LNG (liquefied natural gas) industry has had ... it is generally well known that any overseas LNG project places a heavy demand on money ... should ...

A. Pastuhov

1972-01-01T23:59:59.000Z

199

NSLS Industrial User Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jun Wang Physicist, Industrial Program Coordinator Phone: 344-2661 Email: junwang@bnl.gov Jun Wang is an Industrial Program Coordinator in the Photon Science Directorate at Brookhaven National Laboratory. She is working closely with industrial researchers as well as beamline staff to identify and explore new opportunities in industrial applications using synchrotron radiation. She has been leading the industrial research program including consultation, collaboration and outreach to the industrial user groups. Before joining BNL in 2008, Jun Wang was a Lead Scientist for a high-resolution high throughput powder diffraction program at the Advanced Photon Source (APS). As a Physicist at BNL, her research focuses on materials structure determination and evolution. Her expertise covers wide range x-ray techniques such as thin film x-ray diffraction and reflectivity, powder diffraction, small angle x-ray scattering, protein solution scattering and protein crystallography, as well as x-ray imaging. Currently she is the project leader of a multi-million dollar project on transmission x-ray microscopy recently funded by the U.S. DOE and the spokesperson for this new imaging beamline at the NSLS. She has also been collaborating with universities and industries for several projects on energy research at the NSLS.

200

Industrial Load Shaping: A Utility Strategy to Deal with Competition  

E-Print Network [OSTI]

INDUSTRIAL LOAD SHAPING: A UTILITY STRATEGY TO DEAL WITH COMPETITION DONALD BULES BULES AND ASSOCIATES SAN FRANCISCO, ABSTRACT In recent years competition from various sources such as cogeneration and bypass has led many utilities... to refocus attention on their large industrial customers. Industrial load shaping is a customized program involving cost-effective process modifications and operational changes which result in a restructuring of the electric load profile of individual...

Bules, D.

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Industrial process surveillance system  

DOE Patents [OSTI]

A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

1998-06-09T23:59:59.000Z

202

General Category  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sunrise and Sunset Visual Differences Sunrise and Sunset Visual Differences Name: Joey Status: other Grade: other Country: Canada Date: Spring 2012 Question: It seems that sunrise and sunset don't look symmetric. I mean that sunsets tend to have much redder skies and sunrise is usually a bit gloomier. If you see a picture, many times you can tell if its sunrise or sunset, even though I would think they should like identical, except that the sun is either going up or going down. Why do they not appear the same but in reverse? Replies: Funny you should ask as a paper just arrived which is sure to have the answer and I will read it now....... OK, the morning sky, and the sky in general, is blue due to Rayleigh scattering [which affects short wavelengths the most] of the sun light by air molecules and other microscopic particles.

203

Carbon Emissions: Food Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Food Industry Food Industry Carbon Emissions in the Food Industry The Industry at a Glance, 1994 (SIC Code: 20) Total Energy-Related Emissions: 24.4 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 6.6% Total First Use of Energy: 1,193 trillion Btu -- Pct. of All Manufacturers: 5.5% Carbon Intensity: 20.44 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 24.4 Net Electricity 9.8 Natural Gas 9.1 Coal 4.2 All Other Sources 1.3 Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998

204

Carbon Emissions: Chemicals Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Chemicals Industry Chemicals Industry Carbon Emissions in the Chemicals Industry The Industry at a Glance, 1994 (SIC Code: 28) Total Energy-Related Emissions: 78.3 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 21.1% -- Nonfuel Emissions: 12.0 MMTC Total First Use of Energy: 5,328 trillion Btu -- Pct. of All Manufacturers: 24.6% Energy Sources Used As Feedstocks: 2,297 trillion Btu -- LPG: 1,365 trillion Btu -- Natural Gas: 674 trillion Btu Carbon Intensity: 14.70 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 78.3 Natural Gas 32.1

205

Argonne CNM: Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

For Industrial Users For Industrial Users The Center for Nanoscale Materials (CNM) has specific interest in growing the industrial user program and encourages researchers in industry to consider the capabilities and expertise we have to offer. As a CNM user, you have easy access to sophisticated scientific instrumentation geared toward nanoscience and nanotechnology. Moreover, our widely recognized staff researchers offer support in designing your experiments, using the equipment, and analyzing your data. Access to the CNM is through peer review of user proposals. Before you submit your first user proposal, we encourage you to contact any of our staff researchers, group leaders, the User Office, or division management to discuss the feasibility of your intended research using the expertise and facilities at the CNM. We are here to serve you as part of our user community and will be happy to address any questions you might have.

206

Electric Utility Industry Update  

Broader source: Energy.gov (indexed) [DOE]

Electric Utility Industry Update Electric Utility Industry Update Steve Kiesner Director, National Customer Markets Edison Electric Institute FUPWG Spring 2012 April 12, 2012 Edison Electric Institute  Investor-Owned Electric Companies  Membership includes  200 US companies,  More than 65 international affiliates and  170 associates  US members  Serve more than 95% of the ultimate customers in the investor-owned segment of the industry and  Nearly 70% of all electric utility ultimate customers, and  Our mission focuses on advocating public policy; expanding market opportunities; and providing strategic business information Agenda Significant Industry Trends Utility Infrastructure Investments Generation and Fuel Landscape

207

Carbon Emissions: Paper Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Paper Industry Paper Industry Carbon Emissions in the Paper Industry The Industry at a Glance, 1994 (SIC Code: 26) Total Energy-Related Emissions: 31.6 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 8.5% Total First Use of Energy: 2,665 trillion Btu -- Pct. of All Manufacturers: 12.3% -- Pct. Renewable Energy: 47.7% Carbon Intensity: 11.88 MMTC per quadrillion Btu Renewable Energy Sources (no net emissions): -- Pulping liquor: 882 trillion Btu -- Wood chips and bark: 389 trillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 31.6 Net Electricity 11.0

208

Industry | OpenEI  

Open Energy Info (EERE)

Industry Industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by other industries and construction. Data is only available for Paraguay and the U.S., years 2000 to 2007. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption Industry UN Data application/zip icon XML (zip, 514 bytes) application/zip icon XLS (zip, 425 bytes) Quality Metrics

209

Industry - ORNL Neutron Sciences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Former User Group Chair Enthusiastic About Relevance of Neutron Scattering Former User Group Chair Enthusiastic About Relevance of Neutron Scattering to Industrial Research Former User Group Chair Mike Crawford Mike Crawford, DuPont Research and Development. The drive is intensifying to encourage research partnerships between Neutron Sciences and private industry. Such partnerships, a long-term strategic goal set by the DOE's Basic Energy Sciences Advisory Committee, will deliver industry and its technological problems to SNS and HFIR, where joint laboratory-industry teams can use the unparalleled resources available here to resolve them. "SNS is a tremendous facility. It has the potential to have a couple of thousand user visits a year and, if they build another target station in the future, you're probably talking about 4000 user visits a year,"

210

Energy Industry Analyst  

Broader source: Energy.gov [DOE]

A successful candidate in this position will function as an Energy Industry Analyst within FE's Office of Oil and Gas, with responsibility for supporting senior staff members in performing policy...

211

Mining Industry Profile  

Broader source: Energy.gov [DOE]

The U.S. mining industry consists of the search for, extraction, beneficiation, and processing of naturally occurring solid minerals from the earth. These mined minerals include coal, metals such...

212

Load Management for Industry  

E-Print Network [OSTI]

In the electric utility industry, load management provides the opportunity to control customer loads to beneficially alter a utility's load curve Load management alternatives are covered. Load management methods can be broadly classified into four...

Konsevick, W. J., Jr.

1982-01-01T23:59:59.000Z

213

Uranium Industry Annual, 1992  

SciTech Connect (OSTI)

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

Not Available

1993-10-28T23:59:59.000Z

214

Industrial power by research?  

Science Journals Connector (OSTI)

... The largest nation on the Earth is at last on the road to becoming an industrial power matching in prosperity and creativity the most successful nations elsewhere in the world. ... ask whether China has always been so certain of itself.

1985-11-21T23:59:59.000Z

215

Steel Industry Profile  

Broader source: Energy.gov [DOE]

The steel industry is critical to the U.S. economy. Steel is the material of choice for many elements of manufacturing, construction, transportation, and various consumer products. Traditionally...

216

Presentations for Industry  

Broader source: Energy.gov [DOE]

Industrial energy managers, utilities, and energy management professionals can find online trainings and information dissemination at no-cost. AMO has provided these energy-saving strategies from leading manufacturing companies and energy experts through several different presentation series.

217

Industrial Decision Making  

E-Print Network [OSTI]

Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy...

Elliott, R. N.; McKinney, V.; Shipley, A.

2008-01-01T23:59:59.000Z

218

Macro Industrial Working Group  

U.S. Energy Information Administration (EIA) Indexed Site

your attention 22 Industrial Team Washington DC, September 29, 2014 Macro Team: Kay Smith (lead) (202) 586-1132 | kay.smith@eia.gov Vipin Arora (202) 586-1048 |...

219

Industrial Assessment Center  

SciTech Connect (OSTI)

The University of Dayton (UD) performed energy assessments, trained students and supported USDOE objectives. In particular, the UD Industrial Assessment Center (IAC) performed 96 industrial energy assessment days for mid-sized manufacturers. The average identified and implemented savings on each assessment were $261,080 per year and $54,790 per year. The assessments served as direct training in industrial energy efficiency for 16 UD IAC students. The assessments also served as a mechanism for the UD IAC to understand manufacturing energy use and improve upon the science of manufacturing energy efficiency. Specific research results were published in 16 conference proceedings and journals, disseminated in 22 additional invited lectures, and shared with the industrial energy community through the UD IAC website.

J. Kelly Kissock; Becky Blust

2007-04-17T23:59:59.000Z

220

ECSS Standard Compliant Agile Software Development [An Industrial Case Study  

E-Print Network [OSTI]

ECSS Standard Compliant Agile Software Development [An Industrial Case Study] Ehsan Ahmad. In particular, the agile development processes studied and practiced in the Software Engineering field at large in the European space industry that is using agile software development methods in ECSS projects. We discuss

Feldt, Robert

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Industrial Development (Indiana) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

(Indiana) (Indiana) Industrial Development (Indiana) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info Start Date 1981 State Indiana Program Type Corporate Tax Incentive Enterprise Zone Provider Indiana Economic Development Corporation An economically distressed county can apply for designation as a community

222

Industrial energy use indices  

E-Print Network [OSTI]

and colder are determined by annual average temperature weather data). Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used in the south of the U.S. iv... This analysis uses electricity and natural gas energy consumption and area data of manufacturing plants available in the U.S. Department of Energys national Industrial Assessment Center (IAC) database. The data there come from Industrial Assessment Centers...

Hanegan, Andrew Aaron

2008-10-10T23:59:59.000Z

223

Tuesday Webcasts for Industry  

Broader source: Energy.gov [DOE]

Learn about AMO's software tools, technologies, partnership opportunities, and other resources by watching the Tuesday Webcasts for Industry. They are held on the first Tuesday of every month from 2:00 to 3:00 p.m. Eastern time and are presented by manufacturers, AMO staff, and industry experts. Register to participate in upcoming Tuesday webcasts by visiting the AMO Events Calendar or Training Calendar. Each entry includes the webcast's date, topic, and registration link, and a detailed description.

224

Japan Confronts Industry Decline  

Science Journals Connector (OSTI)

Japan Confronts Industry Decline ... The moves are taking place at a time when demand in Japan is weak and companies face competition from lower-cost players in the Middle East and the U.S. ... Only a few months ago, Japans largest chemical company, Mitsubishi Chemical, cited deteriorating business conditions when it announced it would close one of its ethylene crackers in Kashima, Ibaraki prefecture, an industrial city a few hours drive northeast of Tokyo. ...

JEAN-FRANOIS TREMBLAY

2013-02-11T23:59:59.000Z

225

Xcel Energy- Commercial and Industrial Standard Offer Program  

Broader source: Energy.gov [DOE]

Xcel Energy Large Commercial and Industrial Standard Offer Program (SOP) pays incentives to businesses for retrofit and new construction projects that save energy in peak summer demand periods and...

226

Climate Change, the Clean Air Act, and Industrial Pollution  

E-Print Network [OSTI]

thirty- three percent of U.S. GHG emissions, largely fromgenerates twenty percent of U.S. GHG emissions, through bothon-site fuel combustion and GHG-generating industrial

Kaswan, Alice

2012-01-01T23:59:59.000Z

227

Development of a process control sensor for the glass industry  

SciTech Connect (OSTI)

This project was initiated to fill a need in the glass industry for a non-contact temperature sensor for glass melts. At present, the glass forming industry (e.g., bottle manufacture) consumes significant amounts of energy. Careful control of temperature at the point the bottle is molded is necessary to prevent the bottle from being rejected as out-of-specification. In general, the entire glass melting and conditioning process is designed to minimize this rejection rate, maximize throughput and thus control energy and production costs. This program focuses on the design, development and testing of an advanced optically based pyrometer for glass melts. The pyrometer operates simultaneously at four wavelengths; through analytical treatment of the signals, internal temperature profiles within the glass melt can be resolved. A novel multiplexer alloys optical signals from a large number of fiber-optic sensors to be collected and resolved by a single detector at a location remote from the process. This results in a significant cost savings on a per measurement point basis. The development program is divided into two phases. Phase 1 involves the construction of a breadboard version on the instrument and its testing on a pilot-scale furnace. In Phase 2, a prototype analyzer will be constructed and tested on a commercial forehearth. This report covers the Phase 1 activities.

Gardner, M.; Candee, A.; Kramlich, J.; Koppang, R.

1991-05-01T23:59:59.000Z

228

Urban and Industrial Sites Reinvestment Tax Credit Program (Connecticut) |  

Broader source: Energy.gov (indexed) [DOE]

and Industrial Sites Reinvestment Tax Credit Program and Industrial Sites Reinvestment Tax Credit Program (Connecticut) Urban and Industrial Sites Reinvestment Tax Credit Program (Connecticut) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Connecticut Program Type Corporate Tax Incentive Provider Department of Economic and Community Development

229

Clean Energy Manufacturing Initiative Industrial Efficiency and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

230

Industrial Energy Efficiency Assessments | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Industrial Energy Efficiency Assessments Industrial Energy Efficiency Assessments Details about the Industrial Energy Efficiency Assessments program and its implementation in...

231

Encouraging Industrial Demonstrations of Fuel Cell Applications  

E-Print Network [OSTI]

amounts of electricity and process heat; yet none of these have tested a fuel cell. THE HARKET A recent study performed by the Department of Energy (reference 1) stated, "It is possi ble that the on-site market for fuel cells may eventually become... as large worldwide as that for electric utility fuel cell systems." The study included the industrial sector as part of the on-site market. It went on to state, "The potential industrial cogenera tion market is at present unknown. It may be as much...

Anderson, J. M.

232

General Category  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Carbon Dioxide and Animal Function Carbon Dioxide and Animal Function Name: Lizzy Status: student Grade: 6-8 Location: CA Country: USA Date: Spring 2012 Question: I was wondering, why do humans and other life forms require a balance of carbon dioxide in the atmosphere? Replies: Carbon dioxide is absorbed by plants as part of their metabolism. Their end product is oxygen, which all animal life requires. In addition, some life forms require carbon dioxide to balance their pH (acidity), although mammals can survive in a carbon dioxide - free environment for time periods because the body has a mechanism to control pH. In the long term the level of carbon dioxide in the atmosphere is increasing, largely from the combustion of hydrocarbon fuels. The weight of the experimental evidence leads to the conclusion that if these emissions continue uncontrolled, the temperature of the atmosphere (and the Earth's surface) will increase to levels that will be hazardous to all living species.

233

General Category  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Pig Tails Pig Tails Name: Jayden Status: student Grade: 9-12 Location: Outside U.S. Country: Australia Date: Spring 2012 Question: Why do pigs have curly tails? Replies: Good question, very good question. There seems to be no advantage in having a curly tail as such. Wild hogs have straight tails and use them for signaling things such as aggression and retreat. I think it most probable that curly tails are an unintended consequence of the domestication of hogs. In other words, during the domestication and breeding of domestic hogs, the curly tail gene was somehow selected for, (perhaps it was linked with another gene we selected for),so as humans bred hogs for meat, large litters and so on we got curly tails in the bargain. Since the domestic hog does not need to signal with its tail and there seems to be no problem with curly tails, the gene was not selected against and just stayed on as it were.

234

1 Industrial Electron Accelerators type ILU for Industrial Technologies  

E-Print Network [OSTI]

1 Industrial Electron Accelerators type ILU for Industrial Technologies The present work describes industrial electron accelerators of the ILU family. Their main parameters, design, principle of action the pulse linear accelerators type ILU are developed and supplied to the industry. The ILU machines

235

industrial & systems Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 industrial & systems Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take s e n G i n e e r i n G ( i s e ) ISE 105 Introduction to Industrial and Systems Engineering (2, Fa

Rohs, Remo

236

industrial & systems Industrial and Systems engineers use engineering  

E-Print Network [OSTI]

78 industrial & systems Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take to introduce the philosophy, subject matter, aims, goals, and techniques of industrial and systems engineering

Rohs, Remo

237

Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst  

E-Print Network [OSTI]

9/13/2007 Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst Department of Mechanical and Industrial Engineering About the Mechanical and Industrial Engineering Industry Advisory Board The purpose of the Mechanical and Industrial Engineering Industry Advisory

Mountziaris, T. J.

238

Reshaping the electricity supply industry  

SciTech Connect (OSTI)

Cigre`s Electra magazine published this interview with Alfonso Limbruno, CEO of ENEL S.p.A. To put the interview in perspective, this article begins with a brief overview of ENEL and a biographical sketch of Alfonso Limbruno, and also carries comments from Y. Thomas, secretary general of CIGRE. ENEL is a vertically integrated nationwide electricity company engaged in the generation, transmission, distribution, and sale of electricity, predominantly in Italy. ENEL`s share accounts for approximately 80 percent of Italian electricity demand. Measured by amount of electricity sold, ENEL is the third largest electric utility in the OECD countries and the second largest electric utility in Europe. Measured by revenues, ENEL is one of the largest companies in Italy, with a turnover of Lit. 37,632 billion. In 1995, ENEL served approximately 28.5 million customers and sold 211,607 GWh of electricity. ENEL`s gross installed generating capacity at December 31, 1995 was 55,906 MW. Alfonso Limbruno made all his career in the Italian electricity supply industry (ESI) and has had quite a unique experience: he went through a complete cycle of change of the ESI in his country, the nationalization of the sector in 1962 with the merging in ENEL of over 1,200 undertakings, and now the privatization of the company, along with a far reaching restructuring of the industry. He was appointed CEO of ENEL in August 1992.

NONE

1997-03-01T23:59:59.000Z

239

Session: Wind industry project development  

SciTech Connect (OSTI)

This first session at the Wind Energy and Birds/Bats workshop consisted of two presentations followed by a question and answer period. The session was intended to provide a general overview of wind energy product development, from the industry's perspective. Tom Gray of AWEA presented a paper titled ''State of the Wind Energy Industry in 2004'', highlighting improved performance and lower cost, efforts to address avian impacts, a status of wind energy in comparison to other energy-producing sources, and ending on expectations for the near future. Sam Enfield of Atlantic Renewable Energy Corporation presented a paper titled ''Key Factors for Consideration in Wind Plant Siting'', highlighting factors that wind facility developers must consider when choosing a site to build wind turbines and associated structures. Factors covered include wind resources available, ownership and land use patterns, access to transmission lines, accessibility and environmental impacts. The question and answer sum mary included topics related to risk taking, research and development, regulatory requirements, and dealing with utilities.

Gray, Tom; Enfield, Sam

2004-09-01T23:59:59.000Z

240

General Air Permits (Louisiana) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

General Air Permits (Louisiana) General Air Permits (Louisiana) General Air Permits (Louisiana) < Back Eligibility Agricultural Construction Industrial Investor-Owned Utility Municipal/Public Utility Rural Electric Cooperative Utility Program Info State Louisiana Program Type Environmental Regulations Provider Louisiana Department of Environmental Quality Any source, including a temporary source, which emits or has the potential to emit any air contaminant requires an air permit. Facilities with potential emissions less than 5 tons per year of any regulated air pollutant do not need a permit. The Louisiana Department of Environmental Quality issues Title V General Permits. The permit is developed based on equipment types versus facility types, the general permits are not limited in their use to a specific industry or category. Title V permits combine

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

E-Print Network 3.0 - agro-industrial products materiels Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mackenzie Summary: Poverty Alleviation through Cleaner Energy from Agro- industries in Africa (PACEAA) - 10 countries S... :www.applesonline.info 12;Two large UNEPGEF...

242

ET Industries, Inc.  

Broader source: Energy.gov (indexed) [DOE]

ET Industries, Inc. ET Industries, Inc. (showerheads) Issued: May 24, 2013 BEFORE THE U.S. DEPARTMENT OF ENERGY Washington, D.C. 20585 ) ) ) ) ) Case Number: 2012-SE-2902 AMENDED NOTICE OF NONCOMPLIANCE DETERMINATION 1 Manufacturers (including importers) are prohibited from distributing covered products in the United States that do not comply with applicable federal water conservation standards. See 10 C.F.R. §§ 429.5, 429.102; 42 U.S.C. §§ 6291(10), 6302. On April 3, 2012, DOE tested one unit of the "ThunderHead" showerhead basic model ("basic model TH-1 " 2 ), which ET Industries, Inc. ("ET") imported into the United States. On April 24, 2012, DOE completed testing of three additional units of basic model TH-1, also imported into

243

Petrochemical industry drivers  

SciTech Connect (OSTI)

Extensive analyses of profit-ability and pricing over the years have shown that the trends seen in the petrochemical industry have two dominant drivers, namely, industry experience curves (reflecting continuous process improvement and cost savings) and profitability cycles. Any outlook for the future must examine both of these facets. The author`s algorithm for price projections has two primary terms: a cost-related one and a supply/demand-related one. Both are strong functions of experience curves; the latter is also a prime function of cyclicality. At SRI International. To arrive at medium-term quantitative projections, SRI typically creates a consistent base-case scenario that more or less mirrors the past but also incorporates observed directional changes. In this article the author examines in detail how these scenarios are used for projection. He describes experience curves, ethylene/gross domestic product (GDP) penetration levels, industry structure, and cyclicality as they apply to ethylene prices.

Sedriks, W.

1995-11-01T23:59:59.000Z

244

32 - Fundamentals of Industrial Crystallization  

Science Journals Connector (OSTI)

Abstract Industrial crystallization processes aim at the large-scale production of crystalline products through the formation of involving a suspension of growing particles in a solution. The product quality is defined by the kind of crystalline phase produced, the crystal size distribution, the crystal morphology, and the product purity. These product quality aspects are determined by the subprocesses of crystallization of which crystal nucleation and growth are usually of main importance. The driving force for these subprocesses is usually established either by evaporating solvent to increase the concentration or cooling the solution to decrease the solubility. The recent pharmaceutical research interest in continuous crystallization processes is fortified by claims of improved product quality, efficient use of materials and energy resources, and waste stream reductions.

Joop H. ter Horst; Christiane Schmidt; Joachim Ulrich

2015-01-01T23:59:59.000Z

245

Emulsified industrial oils recycling  

SciTech Connect (OSTI)

The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

Gabris, T.

1982-04-01T23:59:59.000Z

246

Workshop proceeding of the industrial building energy use  

SciTech Connect (OSTI)

California has a large number of small and medium sized industries which have a major impact on the demand growth of California utilities. Energy use in building services (lighting, HVAC, office equipment, computers, etc.). These industries constitute an important but largely neglected fraction of the total site energy use. The ratio of energy use in building service to the total site energy use is a function of the industrial activity, its size, and the climate at the site of the facility. Also, energy use in building services is more responsive to weather and occupant schedules than the traditional base-load'' industrial process energy. Industrial energy use is considered as a base-load'' by utility companies because it helps to increase the utilities' load factor. To increase this further, utilities often market energy at lower rates to industrial facilities. Presently, the energy use in the building services of the industrial sector is often clubbed together with industrial process load. Data on non-process industrial energy use are not readily available in the literature. In cases where the major portion of the energy is used in the building services (with daily and seasonal load profiles that in fact peak at the same time as systemwide load peaks), the utility may be selling below cost at peak power times. These cases frequently happen with electric utilities. 30 figs., 6 tabs.

Akbari, H.; Gadgil, A. (eds.)

1988-01-01T23:59:59.000Z

247

Industrial Solar Technology Corp | Open Energy Information  

Open Energy Info (EERE)

Industrial Solar Technology Corp Industrial Solar Technology Corp Jump to: navigation, search Name Industrial Solar Technology Corp Place Golden, Colorado Zip CO 80403-1 Product IST designs, manufactures, installs and operates large scale parabolic trough collector systems. Coordinates 32.729747°, -95.562678° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.729747,"lon":-95.562678,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

248

China's Industrial Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

China's Industrial Energy China's Industrial Energy Consumption Trends and Impacts of the Top-1000 Enterprises Energy- Saving Program and the Ten Key Energy-Saving Projects Jing Ke, Lynn Price, Stephanie Ohshita, David Fridley, Nina Khanna, Nan Zhou, Mark Levine China Energy Group Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Reprint version of journal article published in "Energy Policy", Volume 50, Pages 562-569, November 2012 October 2012 This work was supported by the China Sustainable Energy Program of the Energy Foundation through the U.S. Department of Energy under Contract No. DE-AC02- 05CH11231. ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY

249

Natural Gas Industrial Price  

Gasoline and Diesel Fuel Update (EIA)

Citygate Price Residential Price Commercial Price Industrial Price Electric Power Price Gross Withdrawals Gross Withdrawals From Gas Wells Gross Withdrawals From Oil Wells Gross Withdrawals From Shale Gas Wells Gross Withdrawals From Coalbed Wells Repressuring Nonhydrocarbon Gases Removed Vented and Flared Marketed Production NGPL Production, Gaseous Equivalent Dry Production Imports By Pipeline LNG Imports Exports Exports By Pipeline LNG Exports Underground Storage Capacity Gas in Underground Storage Base Gas in Underground Storage Working Gas in Underground Storage Underground Storage Injections Underground Storage Withdrawals Underground Storage Net Withdrawals Total Consumption Lease and Plant Fuel Consumption Pipeline & Distribution Use Delivered to Consumers Residential Commercial Industrial Vehicle Fuel Electric Power Period: Monthly Annual

250

BTU Accounting for Industry  

E-Print Network [OSTI]

convert utility bills to BTUs? All fuels can be measured in terms of BTU content. Natural gas has a million BTUs per thousand cubic feet; propane - 92,000 BTUs per gallon; fuel oil - 140,000 BTUs per gallon; electricity - 3,413 BTUs per KW hour... BTU ACCOUNTING FOR INDUSTRY Robert O. Redd-CPA Seidman & Seidman Grand Rapids, Michigan Today, as never before, American industry needs to identify and control their most criti cal resources. One of these is energy. In 1973 and again in 1976...

Redd, R. O.

1979-01-01T23:59:59.000Z

251

Chapter 11 - Industrial Automation  

Science Journals Connector (OSTI)

The industrial systems of the future are complex systems composed of vast numbers of devices interacting with each other and with enterprise systems. Modern technologies such as web services, service-oriented architectures (SOAs), the cloud, etc. make it possible for sophisticated infrastructures to emerge in future factories. We take a closer look at key visionary aspects that are expected to be introduced in the industrial automation domain in the years to come, and the pivotal role of M2M and IoT. Additionally, we investigate the impact on the collaboration of machines among themselves and with enterprise systems and their services.

Jan Hller; Vlasios Tsiatsis; Catherine Mulligan; Stamatis Karnouskos; Stefan Avesand; David Boyle

2014-01-01T23:59:59.000Z

252

CONGRESS BLASTS OIL INDUSTRY  

Science Journals Connector (OSTI)

IN PACKED HEARINGS last week before angry members of Congress, the heads of BP, ExxonMobil, Chevron, ConocoPhillips, and Shell Oil defended their industry in light of the April 20 BP oil rig explosion in the Gulf of Mexico, which has led to the worst ...

JEFF JOHNSON

2010-06-21T23:59:59.000Z

253

Industry Partners Panel  

Broader source: Energy.gov [DOE]

Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

254

General Water Quality (Oklahoma) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

General Water Quality (Oklahoma) General Water Quality (Oklahoma) General Water Quality (Oklahoma) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Oklahoma Program Type Environmental Regulations Provider Environmental Quality The purpose of this water quality rule is to protect, maintain and improve

255

A Multimedia Workflow-Based Collaborative Engineering Environment for Oil & Gas Industry  

E-Print Network [OSTI]

A Multimedia Workflow-Based Collaborative Engineering Environment for Oil & Gas Industry Ismael H the control and execution of large and complex industrial projects in oil and gas industry. The environment governmental oil & gas company. The necessity of collaboration is especially acute in the field of computer

Barbosa, Alberto

256

Ethos and industry: a critical study of oil industry advertising from 1974-1984  

SciTech Connect (OSTI)

This study examines the advocacy advertising of the oil industry in general, and Mobil and Exxon Corporations in particular, during the years 1974-1984. The prospects of divestiture and nationalization of the industry, as a result of both gasoline shortages and exponential increases in profits which begin in the early seventies', created a profound concern by the majors that increasing public disaffection might result in legislation inimical to the industry. Mobil and Exxon's advertising attempted to provide a justification not only for their own operations, but for the entire American socio-economic system. The industry's value system was clearly reflected in its efforts to convince the public that its motives grew from an abiding commitment to the nation's well-being. The ideational underpinnings of oil industry discourse are traced through a rhetorical exploration of specific advertising campaigns. The study maintains that the weltanschauung of Big Oil is both directly and indirectly manifest in its advertising. An overall assessment of oil industry advertising is provided within a Burkean framework to treat of the textural elements of its discourse.

Kurzbard, G.

1984-01-01T23:59:59.000Z

257

Industrial Facilities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Industrial Facilities Industrial Facilities Industrial Facilities October 8, 2013 - 10:14am Addthis The Federal Energy Management Program (FEMP) encourages Federal agencies requiring assistance with implementing energy-efficiency measures in their industrial facilities to hire a U.S. Department of Energy Industrial Assessment Center (IAC) for assessment services. The following resources can be used to plan and implement industrial facility energy-efficiency projects. Technical Publications: The Advanced Manufacturing Office (AMO) website offers fact sheets, handbooks, and self-assessment manuals covering steam system efficiency, fundamentals of compressed air systems, motor systems management, and other topics. Tools: The AMO website offers valuable software tools for evaluating

258

Essays on the industrial organization of the airline industry  

E-Print Network [OSTI]

This thesis analyzes several aspects of the Industrial Organization of the airline industry in three separate chapters. Chapter 1 investigates the effect of air traffic delays on airline prices. The degree to which prices ...

Januszewski, Silke I. (Silke Irene), 1974-

2003-01-01T23:59:59.000Z

259

Industrial Assessment Centers (IACs)  

Broader source: Energy.gov [DOE]

Small- and medium-sized manufacturers may be eligible to receive a no-cost assessment provided by DOE Industrial Assessment Centers (IACs). Teams located at 24 universities around the country conduct the energy audits to identify opportunities to improve productivity, reduce waste, and save energy. Each manufacturer typically identifies about $55,000 in potential annual savings on average. Over 15,000 IAC assessments have been conducted. IACs also train the next-generation of energy savvy engineers.

260

Recent developments: Industry briefs  

SciTech Connect (OSTI)

This article is the `Industry Briefs` portion of Nuexco`s July 1992 `Recent Developments` section. Specific items mentioned include: (1) the merger of Entergy and Gulf States Utilities, (2) restart of the Sequoyah Fuels facility in Oklahoma, (3) development of the 7th and 8th nuclear units in Taiwan, (4) purchase of interest in Rio Algom, Ltd, and (5) acquisition of the Italian firm AGIP by a Canadian company.

NONE

1992-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Industrial Analytics Corporation  

SciTech Connect (OSTI)

The lost foam casting process is sensitive to the properties of the EPS patterns used for the casting operation. In this project Industrial Analytics Corporation (IAC) has developed a new low voltage x-ray instrument for x-ray radiography of very low mass EPS patterns. IAC has also developed a transmitted visible light method for characterizing the properties of EPS patterns. The systems developed are also applicable to other low density materials including graphite foams.

Industrial Analytics Corporation

2004-01-30T23:59:59.000Z

262

Large Wind Technology | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Large Wind Technology Large Wind Technology Large Wind Technology The Wind Program works with industry partners to increase the performance and reliability of large wind technologies while lowering the cost of wind energy. The program's research efforts have helped to increase the average capacity factor (a measure of power plant productivity) from 22% for wind turbines installed before 1998 to 35% for turbines installed between 2004 and 2007. Wind energy costs have been reduced from over 55 cents (current dollars) per kilowatt-hour (kWh) in 1980 to under six cents/kWh today. To ensure future industry growth, the technology must continue to evolve, building on earlier successes to further improve reliability, increase capacity factors, and reduce costs. This page describes the goal of the

263

Light Emitting Diodes (LEDs) for General Illumiation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LIGHT LIGHT EMITTING DIODES (LEDS) FOR GENERAL ILLUMINATION AN OIDA TECHNOLOGY ROADMAP An OIDA Report March 2001 Co-Sponsored by DOE/BTS and OIDA Compiled by Eric D. Jones Sandia National Laboratories OIDA Member Use Only OIDA OPTOELECTRONICS INDUSTRY DEVELOPMENT ASSOCIATION 1133 Connecticut Avenue, NW Suite 600 Washington, DC 20036 Ph: (202) 785-4426 Fax: (202) 785-4428 Web: http://www.OIDA.org © 2001 OIDA Optoelectronics Industry Development Association All data contained in this report is proprietary to OIDA and may not be distributed in either original or reproduced form to anyone outside the client's internal organization within five years of the report date without prior written permission of the Optoelectronics Industry Development Association. Published by: Optoelectronics Industry Development Association

264

LCA experiences in Danish industry  

Science Journals Connector (OSTI)

A study has been performed on Danish industrys experiences with LCA. Twenty-six enterprises from different sectors conpleted ... learning phase, and experiences with full-blown LCAs are sparse. Expectations of ...

Ole Broberg; Per Christensen

1999-09-01T23:59:59.000Z

265

Solar Industrial Process Heat Production  

Science Journals Connector (OSTI)

An overview of state of the art in producing industrial process heat via solar energy is presented. End-use matching methodology for assessing solar industrial process heat application potential is described f...

E. zil

1987-01-01T23:59:59.000Z

266

Industrial Heat Pump Design Options  

E-Print Network [OSTI]

There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

Gilbert, J. S.

267

Texas Industries of the Future  

E-Print Network [OSTI]

The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs...

Ferland, K.

268

Empirical essays in industrial organization  

E-Print Network [OSTI]

In this dissertation, I present three empirical essays that encompass topics in industrial organization. The first essay examines the degree of competition and spatial differentiation in the retail industry by exploiting ...

Chiou, Lesley C

2005-01-01T23:59:59.000Z

269

High Technology and Industrial Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Semiconductor clean room Semiconductor clean room High Technology and Industrial Systems EETD's research on high technology buildings and industrial systems is aimed at reducing energy consumed by the industrial sector in manufacturing facilities, including high technology industries such as data centers, cleanrooms in the such industries as electronics and pharmaceutical manufacturing, and laboratories, improving the competitiveness of U.S. industry. Contacts William Tschudi WFTschudi@lbl.gov (510) 495-2417 Aimee McKane ATMcKane@lbl.gov (518) 782-7002 Links High-Performance Buildings for High-Tech Industries Industrial Energy Analysis Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

270

Running Large Scale Jobs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Running Large Scale Jobs Running Large Scale Jobs Users face various challenges with running and scaling large scale jobs on peta-scale production systems. For example, certain...

271

Training For Industry Program (TIP) (Oklahoma) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Training For Industry Program (TIP) (Oklahoma) Training For Industry Program (TIP) (Oklahoma) Training For Industry Program (TIP) (Oklahoma) < Back Eligibility Agricultural Commercial Construction Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Municipal/Public Utility Nonprofit Retail Supplier Rural Electric Cooperative Schools Systems Integrator Transportation Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info Start Date 1968 State Oklahoma Program Type Training/Technical Assistance Provider Oklahoma Department of Career and Technology Education The Oklahoma Department of Career and Technology Education runs the Training For Industry Program (TIP) is a no-cost/low-cost way for new or

272

Innovative Utility Pricing for Industry  

E-Print Network [OSTI]

INNOVATIVE UTILITY PRICING FOR INDUSTRY James A. Ross Drazen-Brubaker &Associates, Inc. St. Louis, Missouri ABSTRACT The electric utility industry represents only one source of power available to industry. Al though the monopolistic... structure of the electric utility industry may convey a perception that an electric utility is unaffected by competition, this is an erroneous perception with regard to in dustry. Electric utilities face increased compe tition, both from other utilities...

Ross, J. A.

273

EPRI's Industrial Energy Management Program  

E-Print Network [OSTI]

EPRI's INDUSTRIAL ENERGY MANAGEMENT PROGRAM ED MERGENS MANAGER EPRI's CHEMICALS & PETROLEUM OFFICE HOUSTON, TEXAS ABSTRACT The loss of American industry jobs to foreign competition is made worse by national concerns over fuels combustion... and other industrial activity effects on our environment. Energy efficiency programs and new electrical processes can playa major role in restoring the environment and in creating a stronger industrial sector in the national economy. Since 1984...

Mergens, E.; Niday, L.

274

PETROLEUM INDUSTRY INFORMATION REPORTING ACT  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION PETROLEUM INDUSTRY INFORMATION REPORTING ACT: RULEMAKING;1 EXECUTIVE SUMMARY In the six months since the new Petroleum Industry Information Reporting Act (PIIRA which is used by the petroleum industry and market trading groups to assess the trends in California

275

Creating Value Wood Products Industry  

E-Print Network [OSTI]

and an information dissemination plan. The program areas are Industrial Process Improvement, Environmental Assessment1 Creating Value for the Wood Products Industry Creating Value for the Wood Products Industry Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland

276

ConEd (Electric) - Commercial and Industrial Energy Efficiency Program |  

Broader source: Energy.gov (indexed) [DOE]

ConEd (Electric) - Commercial and Industrial Energy Efficiency ConEd (Electric) - Commercial and Industrial Energy Efficiency Program ConEd (Electric) - Commercial and Industrial Energy Efficiency Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Large Commercial Energy Study: $50,000 (electric); $67,000 (combined with gas) Program Info Expiration Date 12/31/2015 State New York Program Type Utility Rebate Program Rebate Amount Lighting: Varies widely by type Small Business Energy Surveys: Free Small Business Equipment Upgrades: up to 70% of cost Large Commercial Energy Study: 50% of the cost

277

Waste Heat Recovery from Industrial Process Heating Equipment -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Waste Heat Recovery from Industrial Process Heating Equipment - Waste Heat Recovery from Industrial Process Heating Equipment - Cross-cutting Research and Development Priorities Speaker(s): Sachin Nimbalkar Date: January 17, 2013 - 11:00am Location: 90-2063 Seminar Host/Point of Contact: Aimee McKane Waste heat is generated from several industrial systems used in manufacturing. The waste heat sources are distributed throughout a plant. The largest source for most industries is exhaust / flue gases or heated air from heating systems. This includes the high temperature gases from burners in process heating, lower temperature gases from heat treat, dryers, and heaters, heat from heat exchangers, cooling liquids and gases etc. The previous studies and direct contact with the industry as well as equipment suppliers have shown that a large amount of waste heat is not

278

Guardian Industries | Open Energy Information  

Open Energy Info (EERE)

Industries Industries Jump to: navigation, search Name Guardian Industries Place Auburn Hills, MI Website http://www.guardian.com/ References Results of NREL Testing (Glass Magazine)[1] Guardian News Archive[2] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Other Relationship Partnering Center within NREL Transportation Technologies and Systems Partnership Year 2002 LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Guardian Industries is a company located in Auburn Hills, MI. References ↑ "Results of NREL Testing (Glass Magazine)" ↑ "Guardian News Archive" Retrieved from "http://en.openei.org/w/index.php?title=Guardian_Industries&oldid=381719" Categories: Clean Energy Organizations

279

Inorganic membranes: The new industrial revolution  

SciTech Connect (OSTI)

Separation systems are a vital part of most industrial processes. These systems account for a large fraction of the capital equipment used and the operating costs of industrial processes. Inorganic membranes have the potential for providing separation systems that can significantly reduce both the capital equipment and operating costs. These separation processes include waste management and recycle as well as the primary production of raw materials and products. The authors are rapidly learning to understand the effect of physical and chemical properties on the different transport mechanisms that occur in inorganic membranes. Such understanding can be expected to provide the information needed to design, engineer and manufacture inorganic membranes to produce very high separation factors for almost any separation function. To implement such a revolution, the authors need to organize a unique partnership between the national laboratories, and industry. The university can provide research to understand the materials and transport mechanisms that produce various separations, the national laboratories the development of an economical fabrication and manufacturing capability, and industry the practical understanding of the operational problems required to achieve inplementation.

Fain, D.E. [Martin Merietta Energy Systems, Oak Ridge, TN (United States)

1994-12-31T23:59:59.000Z

280

Colorado Industrial Challenge and Recognition Program | Department...  

Broader source: Energy.gov (indexed) [DOE]

Colorado Industrial Challenge and Recognition Program Colorado Industrial Challenge and Recognition Program This fact sheet offers details of the Colorado Industrial program state...

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Hayward Industries: Order (2010-CE-1110)  

Broader source: Energy.gov (indexed) [DOE]

Washington, D.C. 20585 Washington, D.C. 20585 In the Matter of. ) Hayward Industries, Inc., Case Number: 2010-CE-1110 Respondent ) COMPROMISE AGREEMENT The U.S. Department of Energy Office of the General Counsel initiated this action against Hayward Industries, Inc. ("Respondent") pursuant to 49 C.F.R. § 430.74 by Notice of Proposed Civil Penalty alleging that Respondent had failed to submit a certification report and compliance statement for pool heaters. Respondent on behalf of itself and any parent, subsidiary, division or other related entity and DOE, by their authorized representatives, hereby enter into this Compromise Agreement for the purpose of settling this civil penalty action. 1. DEFINITIONS For the purposes of this Compromise Agreement, the following definitions shall apply:

282

All General Counsel Reports | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7, 2010 7, 2010 Earthjustice, Appliance Standards Awareness Project, Natural Resources Defense Council - Comments in response to DOE solicitation of views on the implementation of test procedure waivers for large capacity clothes washers Earthjustice, Appliance Standards Awareness Project, Natural Resources Defense Council - Comments in response to DOE solicitation of views on the implementation of test procedure waivers for large capacity clothes washers. December 7, 2010 Letter to DOE General Counsel from Whirlpool Senior Counsel, Re: Implementation of Alternative Test Procedure for Large Capacity Residential Clothes Washers Letter to DOE General Counsel from Whirlpool Senior Counsel, Re: Implementation of Alternative Test Procedure for Large Capacity Residential

283

Large Energy Users Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Large Energy Users Program Large Energy Users Program Large Energy Users Program < Back Eligibility Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Other Appliances & Electronics Heat Pumps Commercial Lighting Lighting Water Heating Maximum Rebate Prescriptive: Varies by equipment type Custom: $200,000 or 30% per project Total Prescriptive and Custom combined: $400,000 per calendar year Program Info Funding Source Focus On Energy Start Date 04/01/2012 Expiration Date 12/31/2013 State Wisconsin Program Type State Rebate Program Rebate Amount Prescriptive: Varies by equipment type

284

July 28, 2010, Partnerships of academia, industry, and government labs  

Broader source: Energy.gov (indexed) [DOE]

UNCLASSIFIED UNCLASSIFIED UNCLASSIFIED * Interdisciplinary nature of research * Rapid transition from research to products One size does not fit all Partnerships of academia, industry, and government labs UNCLASSIFIED UNCLASSIFIED Network Science Collaborative Technology Alliance: an Interdisciplinary Collaboration Model Social/Cognitive Network ARC * Principal Member - Rensselaer Polytechnic Institute * General Members - CUNY, Northeastern Univ, IBM Communication Networks ARC * Principal Member - Penn State * General Members - CUNY, USC, UC-Davis, UC-Santa Cruz Information Networks ARC * Principal Member - Univ of Illinois, Urbana Champaign * General Members - CUNY, UC-Santa Barbara, IBM Interdisciplinary Research Center * Principal Member - BBN Tech * General Members - UC-Riverside,

285

Research Projects in Industrial Technology.  

SciTech Connect (OSTI)

The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the industrial sector, as well as other sectors, in its 1986 Power Plan. Specifically, the Council recommended that BPA operate a research and development program in conjunction with industry to determine the potential costs and savings from efficiency improvements in industrial processes which apply to a wide array of industrial firms.'' The section, composed of multidisciplinary engineers, provides technical support to the Industrial Programs Branch by designing and carrying out research relating to energy conservation in the industrial sector. The projects contained in this booklet are arranged by sector --industrial, utility, and agricultural -- and, within each sector, chronologically from ongoing to completed, with those projects completed most recently falling first. For each project the following information is given: its objective approach, key findings, cost, and contact person. Completed projects also include the date of completion, a report title, and report number.

United States. Bonneville Power Administration. Industrial Technology Section.

1990-06-01T23:59:59.000Z

286

Whitacre College of Engineering Industrial Engineering Department  

E-Print Network [OSTI]

Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

Gelfond, Michael

287

Faculty of Engineering & Design Industrial Placements  

E-Print Network [OSTI]

Faculty of Engineering & Design Industrial Placements A guide for industry #12;Industrial placements The Faculty of Engineering & Design has built close links with engineering companies through research, projects, placements and graduate employees. We know that working with industry ensures our

Burton, Geoffrey R.

288

industrial & systems (ISE) Industrial and Systems Engineers use engineering and business principles  

E-Print Network [OSTI]

70 industrial & systems (ISE) Industrial and Systems Engineers use engineering and business systems to help companies compete in today's global marketplace. The Industrial and Systems Engineer. Programs Available · Industrial and Systems Engineering Bachelor of Science 129 units · Industrial

Rohs, Remo

289

industrial & systems (ISE) Industrial and Systems engineers use engineering and business principles  

E-Print Network [OSTI]

74 industrial & systems (ISE) Industrial and Systems engineers use engineering and business to help companies compete in today's global marketplace. The Industrial and Systems engineer's task. Programs Available · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial

Rohs, Remo

290

ESCO Industry in China  

Broader source: Energy.gov (indexed) [DOE]

ESCO Development in ESCO Development in China China-America EE Forum 2011.5.6, S.F Contents Fast development 1 Great potential 2 Opportunities & Challenges 3 Function of EMCA 4 China Energy Conservation project  Officially started in 1998;  It is a key international cooperation project in the field of energy conservation by Chinese government and World Bank/GEF;  The main purpose of the project is to promote Energy Performance Contracting (EPC) mechanism and develop ESCO industry in China Project progress-1 st phase 3 pilot ESCOs: Beijing Liaoning Shandong Phase I EC information Dissemination Center(ECIDC) Project progress-2 nd phase EMCA Phase II I& G New and Potential ESCOs Technical support Financial support Project Progress- 2 nd Phase EMCA---provide practical technical

291

Zoe Industries, Inc.  

Broader source: Energy.gov (indexed) [DOE]

D.C. 20585 D.C. 20585 ) ) ) ) ) Case Number: 2011-SW-2912 Issued: September 28, 2011 NOTICE OF NONCOMPLIANCE DETERMINATION Manufacturers and private labelers are prohibited from distributing covered products that do not comply with applicable Federal water conservation standards. 10 C.F.R. § 429.102; 42 U.S.C. § 6302. On July 20, 2011, DOE tested four units of the Giessdorf eight-jet basic model showerhead, SKU 150043 ("Giessdorf 150043"), manufactured by GiessdorfPlumbing, Inc. ("Giessdorf"), and imported by Zoe Industries, Inc. ("Zoe"), in accordance with DOE test procedures (10 C.F.R. Part 430, Subpart B, Appendix S). DOE's testing demonstrated that the Giessdorf 150043 model is not in compliance with Federal law. First, Federal water conservation standards require that the water flow for a showerhead

292

End User Perspective - Industrial  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solid State Research Center Solid State Research Center DOE Fuel Cell Portable Power Workshop End User Perspective - Industrial Consumer Electronics Power (< 20-50W) Department of Energy Fuel Cell Portable Power Workshop Jerry Hallmark Manager Energy Technologies Lab Motorola Labs Solid State Research Center DOE Fuel Cell Portable Power Workshop Outline * Energy & Power of Portable Devices * Fuel Cell Applications & Cost * Key Requirements & Challenges * Fuels for Portable Fuel Cells * Fuel Transportation Regulations and Standards * Methanol Fuel Cells - Direct Methanol Fuel Cells - Reformed Methanol Fuel Cells * Technical Challenges 2 Solid State Research Center DOE Fuel Cell Portable Power Workshop Portable Electronics Yearly Energy Usage  :KU 1990 1980  :KU

293

Rebuttal: Interacting With the Pharmaceutical Industry  

E-Print Network [OSTI]

9. 6. Angell M. The pharmaceutical industry: To whom is ithas shown that the pharmaceutical industry has profited some

Stone, Susan; Herbert, Mel

2003-01-01T23:59:59.000Z

294

ITP Industrial Materials: Development and Commercialization of...  

Broader source: Energy.gov (indexed) [DOE]

Industrial Materials: Development and Commercialization of Alternative Carbon Fiber Precursors and Conversion Technologies ITP Industrial Materials: Development and...

295

industrial sector | OpenEI  

Open Energy Info (EERE)

industrial sector industrial sector Dataset Summary Description Biomass energy consumption and electricity net generation in the industrial sector by industry and energy source in 2008. This data is published and compiled by the U.S. Energy Information Administration (EIA). Source EIA Date Released August 01st, 2010 (4 years ago) Date Updated August 01st, 2010 (4 years ago) Keywords 2008 biomass consumption industrial sector Data application/vnd.ms-excel icon industrial_biomass_energy_consumption_and_electricity_2008.xls (xls, 27.6 KiB) Quality Metrics Level of Review Peer Reviewed Comment Temporal and Spatial Coverage Frequency Annually Time Period 2008 License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset Usefulness of the metadata

296

User Facilities for Industry 101  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Satellite!Workshop!10!-!User!Facilities!for!Industry!101! Satellite!Workshop!10!-!User!Facilities!for!Industry!101! Organizers:+Andreas+Roelofs+(CNM),+Jyotsana+Lal+(APS),+Katie+Carrado+Gregar+(CNM),+and+Susan+Strasser+ (APS)! ! In! order! to! increase! awareness! of! the! industrial! community! to! Argonne! National! Laboratory! user! facilities,!the!Advanced!Photon!Source!(APS),!the!Center!for!Nanoscale!Materials!(CNM)!and!the!Electron! Microscopy!Center!(EMC)!welcomed!industrial!scientists,!engineers!and!related!professionals!to!a!oneC day! workshop! to! learn! more! about! Argonne's! National! Laboratory! and! the! capabilities/techniques! available! for! their! use.! The! workshop! showcased! several! successful! industrial! user! experiments,! and! explained! the! different! ways! in! which! industrial! scientists! can! work! at! Argonne! or! with! Argonne!

297

Energy Conservation Projects to Benefit the Railroad Industry  

SciTech Connect (OSTI)

The Energy Conservation Projects to benefit the railroad industry using the Norfolk Southern Company as a model for the railroad industry has five unique tasks which are in areas of importance within the rail industry, and specifically in the area of energy conservation. The NIU Engineering and Technology research team looked at five significant areas in which research and development work can provide unique solutions to the railroad industry in energy the conservation. (1) Alternate Fuels - An examination of various blends of bio-based diesel fuels for the railroad industry, using Norfolk Southern as a model for the industry. The team determined that bio-diesel fuel is a suitable alternative to using straight diesel fuel, however, the cost and availability across the country varies to a great extent. (2) Utilization of fuel cells for locomotive power systems - While the application of the fuel cell has been successfully demonstrated in the passenger car, this is a very advanced topic for the railroad industry. There are many safety and power issues that the research team examined. (3) Thermal and emission reduction for current large scale diesel engines - The current locomotive system generates large amount of heat through engine cooling and heat dissipation when the traction motors are used to decelerate the train. The research team evaluated thermal management systems to efficiently deal with large thermal loads developed by the operating engines. (4) Use of Composite and Exotic Replacement Materials - Research team redesigned various components using new materials, coatings, and processes to provide the needed protection. Through design, analysis, and testing, new parts that can withstand the hostile environments were developed. (5) Tribology Applications - Identification of tribology issues in the Railroad industry which play a significant role in the improvement of energy usage. Research team analyzed and developed solutions which resulted in friction modification to improve energy efficiency.

Clifford Mirman; Promod Vohra

2009-12-31T23:59:59.000Z

298

Draft General Conformity Determination  

Broader source: Energy.gov (indexed) [DOE]

I I Draft General Conformity Determination U.S. Department of the Interior Minerals Management Service MMS Cape Wind Energy Project January 2009 Final EIS Appendix I Draft General Conformity Determination Draft General Conformity Determination Cape Wind Energy Project Prepared by Minerals Management Service Herndon, VA November 2008 i TABLE OF CONTENTS 1.0 INTRODUCTION TO THE PROPOSED ACTION............................................................... 1 2.0 GENERAL CONFORMITY REGULATORY BACKGROUND .......................................... 2 2.1 GENERAL CONFORMITY REQUIREMENTS.................................................................... 2 2.2 GENERAL CONFORMITY APPLICABILITY.....................................................................

299

Industry Interactive Procurement System (IIPS)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industry Interactive Industry Interactive Industry Interactive Industry Interactive Procurement System Procurement System (IIPS) (IIPS) Douglas Baptist, Project Manager Information Management Systems Division US Department of Energy IIPS Functions Issue synopses, solicitations and related documents via the Internet Receive and Respond to Solicitation Specific Questions Receive proposal, bid or application information electronically Provide access to proposal information to authorized personnel through a web browser Conduct negotiations or obtain clarifications Issue award documents IIPS Security Security Plan in place and approved by DOE's Chief Information Officer System security tested by DOE's Computer Incident Advisory Capability team Security measures include: - Encryption on the IIPS server

300

Eolica Industrial | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Name: Eolica Industrial Place: Sao Paulo, Sao Paulo, Brazil Zip: 01020-901 Sector: Wind energy Product: Brazil based wind turbine steel towers and...

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Industrial Carbon Capture Project Selections  

Broader source: Energy.gov [DOE]

Industrial Carbon Capture Project SelectionsSeptember 2, 2010These projects have been selected for negotiation of awards; final award amounts may vary.

302

Deaerators in Industrial Steam Systems  

Broader source: Energy.gov [DOE]

This tip sheet on deaerators provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

303

Energy Savings in Industrial Buildings  

E-Print Network [OSTI]

for deployment of energy savings technologies will be explored along with recommendations for policies to promote energy efficiency in industrial buildings....

Zhou, A.; Tutterow, V.; Harris, J.

304

FAQS Reference Guide Industrial Hygiene  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the November 2007 edition of DOE-STD-1138-2007, Industrial Hygiene Functional Area Qualification Standard.

305

Industry Interactive Procurement System (IIPS)  

Broader source: Energy.gov [DOE]

Presentation on DOEs Industry Interactive Procurement System (IIPS) presented at the PEM fuel cell pre-solicitation meeting held May 26, 2005 in Arlington, VA.

306

Ventower Industries | Open Energy Information  

Open Energy Info (EERE)

Place: Monroe, Michigan Zip: 48161 Sector: Wind energy Product: Michigan-based wind turbine tower manufacturer. References: Ventower Industries1 This article is a stub. You...

307

Shrenik Industries | Open Energy Information  

Open Energy Info (EERE)

Maharashtra, India Zip: 416 109 Sector: Wind energy Product: Maharashtra-based wind turbine tower manufacturer and subsidiary of the Sanjay Ghodawat Group of Industries....

308

AEO2014: Preliminary Industrial Output  

Gasoline and Diesel Fuel Update (EIA)

Elizabeth Sendich, Analyst, and Kay Smith, Team Leader Macroeconomic Analysis Team September 26, 2013 Preliminary AEO2014 Macroeconomic Industrial Results DO NOT CITE OR...

309

Industrial Facility Best Practice Scorecard  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

BP Scorecard 20120620 ( 2012Georgia Tech Research Corporation) Superior Energy Performance CM Industrial Facility Best Practice Scorecard Rev. 9 5 December 2012 Replaces rev. 8...

310

Motech Industries | Open Energy Information  

Open Energy Info (EERE)

for Others) for this property. Partnering Center within NREL National Center for Photovoltaics Partnership Year 2008 Motech Industries is a company located in Bethlehem, Taiwan....

311

General | Open Energy Information  

Open Energy Info (EERE)

Volver Pgina principal General banner.jpg Retrieved from "http:en.openei.orgwindex.php?titleGeneral&oldid519011" What links here Related changes Special pages Printable...

312

General User Proposals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

General User Proposals Print General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS or the...

313

General User Proposals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Office General User Proposals Print General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS...

314

An Energy Conservation Program in the Food Industry  

E-Print Network [OSTI]

AN ENERGY CONSERVATION PROGRAM IN THE FOOD INDUSTRY Carl T. Farner General Foods Corporation White Plains, General Foods Corporation is one of the largest food manufacturing companies in the United States. It's brand names are well known..., covering a wide range of food products. Maxwell House coffee, Post cereals, Birds Eye frozen vegetables, Jell-O desserts and Kool-Aid powdered drink mixes are some of the more prominent ones. The company also manufactures some food ingredients...

Farner, C. T.

315

Condensation and Large Cardinals Sy-David Friedman, Peter Holy  

E-Print Network [OSTI]

Condensation and Large Cardinals Sy-David Friedman, Peter Holy Abstract We introduce two generalized condensation principles: Local Club Condensation and Stationary Condensation. We show that while Strong Condensation (a generalized Condensation principle intro- duced by Hugh Woodin in [19

316

Department of Industrial Engineering Spring 2011 Armstrong World Industries, Inc  

E-Print Network [OSTI]

PENNSTATE Department of Industrial Engineering Spring 2011 Armstrong World Industries, Inc Overview The main objectives were the following: -To reduce wasted space and optimize the Armstrong Marietta plant generate? How did you analyse them? Outcomes Armstrong will save on forklift fuel costs as a result

Demirel, Melik C.

317

Demand Relief and Weather Sensitivity in Large California Commercial Office Buildings  

E-Print Network [OSTI]

implemented or are under consideration. Historically, the target customers have been large industrial users who can reduce the equivalent load of several large office buildings. While the individual load reduction from an individual office building may be less...

Kinney, S.; Piette, M. A.; Gu, L.; Haves, P.

2001-01-01T23:59:59.000Z

318

Fast methods for scheduling with applications to real-time systems and large-scale, robotic manufacturing of aerospace structures  

E-Print Network [OSTI]

Across the aerospace and automotive manufacturing industries, there is a push to remove the cage around large, industrial robots and integrate right-sized, safe versions into the human labor force. By integrating robots ...

Gombolay, Matthew C. (Matthew Craig)

2013-01-01T23:59:59.000Z

319

Laclede Gas Company - Commercial and Industrial Energy Efficiency Rebate  

Broader source: Energy.gov (indexed) [DOE]

Laclede Gas Company - Commercial and Industrial Energy Efficiency Laclede Gas Company - Commercial and Industrial Energy Efficiency Rebate Program Laclede Gas Company - Commercial and Industrial Energy Efficiency Rebate Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Heating Other Commercial Weatherization Maximum Rebate Commercial Incentive: Contact Laclede Gas for general program incentive maximum Gas Boilers: 1,000,000 BTU/hr ($3,000) Continuous Modulating Burner: $15,000 cap per burner Gas-fired Boiler Tune Up: $750 per building (non-profit), $500 per boiler (C&I) High Efficiency Air-Forced Furnaces: $200-$250 Vent Dampers: $500 per boiler Steam Trap Replacements: $2,500 Primary Air Dampers: $500 Food Service Gas Steamer: $475 Food Service Gas Fryer: $350

320

Dealing in Doubt: The Climate Denial Industry and Climate Science  

E-Print Network [OSTI]

with disease] that exists in the mind of the general public. It is also the means of establishing a controversy challenges to climate science have made him the darling of the industry-funded, US based conservative think. There are many more like him who repeat the denier message for no other reason than because they believe it

Fairchild, Mark D.

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Analysis and Decomposition of the Energy Intensity of Industries in  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Decomposition of the Energy Intensity of Industries in and Decomposition of the Energy Intensity of Industries in California Title Analysis and Decomposition of the Energy Intensity of Industries in California Publication Type Journal Article Year of Publication 2012 Authors de la du Can, Stephane Rue, Ali Hasanbeigi, and Jayant A. Sathaye Journal Energy Policy Volume 46 Pagination 234-245 Keywords california, co2 emissions, energy intensity, energy use Abstract In 2008, the gross domestic product (GDP) of California industry was larger than GDP of industry in any other U.S. states. This study analyses the energy use of and output from seventeen industry subsectors in California and performs decomposition analysis to assess the influence of different factors on California industry energy use. The logarithmic mean Divisia index method is used for the decomposition analysis. The decomposition analysis results show that the observed reduction of energy use in California industry since 2000 is the result of two main factors: the intensity effect and the structural effect. The intensity effect has started pushing final energy use downward in 2000 and has since amplified. The second large effect is the structural effect. The significant decrease of the energy-intensive "Oil and Gas Extraction" subsector's share of total industry value added, from 15% in 1997 to 5% in 2008, and the increase of the non-energy intensive "Electric and electronic equipment manufacturing" sector's share of value added, from 7% in 1997 to 30% in 2008, both contributed to a decrease in the energy intensity in the industry sector

322

Large-Eddy Simulation for Green Energy and Propulsion Systems...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Large-Eddy Simulation for Green Energy and Propulsion Systems PI Name: Umesh Paliath PI Email: paliath@ge.com Institution: General Electric Allocation Program: INCITE Allocation...

323

Residential Commercial Industrial Year  

Gasoline and Diesel Fuel Update (EIA)

4 4 Residential Commercial Industrial Year and State Volume (million cubic feet) Consumers Volume (million cubic feet) Consumers Volume (million cubic feet) Consumers 2000 Total ................... 4,996,179 59,252,728 3,182,469 5,010,817 8,142,240 220,251 2001 Total ................... 4,771,340 60,286,364 3,022,712 4,996,446 7,344,219 217,026 2002 Total ................... 4,888,816 61,107,254 3,144,169 5,064,384 7,507,180 205,915 2003 Total ................... R 5,079,351 R 61,871,450 R 3,179,493 R 5,152,177 R 7,150,396 R 205,514 2004 Total ................... 4,884,521 62,469,142 3,141,653 5,135,985 7,250,634 212,191 Alabama ...................... 43,842 806,175 26,418 65,040 169,135 2,800 Alaska.......................... 18,200 104,360 18,373 13,999 46,580 10 Arizona ........................

324

Building A New Biofuels Industry  

Science Journals Connector (OSTI)

Building A New Biofuels Industry ... It may be another five years or more before the fledgling industry catches up to the lofty goals called for in the Renewable Fuel Standard (RFS)a federal-government-mandated schedule of yearly biofuel production targets. ...

MELODY M. BOMGARDNER

2013-01-28T23:59:59.000Z

325

The Wool Industries Research Association  

Science Journals Connector (OSTI)

... THE report of the Director of Research of Wool Industries Research Association briefly summarizes some of the research during the year in ... Industries Research Association briefly summarizes some of the research during the year in scouring and combing, woollen carding and spinning, worsted drawing and spinning and weaving (Publication ...

1963-06-15T23:59:59.000Z

326

College of Engineering Industrial Engineering  

E-Print Network [OSTI]

College of Engineering Industrial Engineering Core 2.0 Completion Checklist Industrial Engineering) 6 Research and Creative Experience R EIND 499R (I&ME 444 R and I&ME 445 R) Note: Courses completed Social Sciences; * EGEN 310 (ENGR 310), Multidisciplinary Engineering Design, may be substituted

Dyer, Bill

327

Industrial Use of Infrared Inspections  

E-Print Network [OSTI]

, but in the final analysis it comes down to the fact that the industrial management responsible for the operations and production budgets did not, and in many cases, still does not understand the economic benefits to the company that infrared industrial inspections...

Duch, A. A.

1979-01-01T23:59:59.000Z

328

Microfluidicsfrom fundamental research to industrial applications  

Science Journals Connector (OSTI)

The advance of microfluidics started in the early 1980s. At the time, researchers realized that many processes and reactions in chemistry and biology, which typically take place on small length scales, can be defined, controlled and understood much better when using tools on equally small length scales. Reactions and reaction kinetics rely on (gradual) concentration differences and microfluidics provides the unique possibility to establish exactly such gradients of solutes, ion concentrations, pH value and so on. Nowadays the variety of specific microfluidic methods is large. In principle, they can be divided into two groups: (i) monophase flow, where miscible (e.g. aqueous) fluids are mixed, mostly by diffusion owing to the laminar flow on small length scales and (ii) multiphase flow, the most prominent example of which is probably droplet microfluidics, where water-in-oil or oil-in-water emulsions are used to encapsulate chemical or biological systems and separate them from each other, much like in 'micron-scale test tubes'. Now, 30 years later, microfluidic techniques are seriously considered for industrial applications, although some important steps in the upscaling process are still missing. The purpose of this special issue is to shed light on the different aspects in microfluidics research starting from fundamental research reaching all the way to industrial applications. The study by Toma and co-workers takes advantage of the controlled diffusive mixing when co-flowing aqueous, miscible solutions. They combine microfluidics with optical, spectroscopic and scattering techniques to study DNA packing. Nunes et al review the different regimes when replacing one of the fluids by an oil phase and varying flow rates and device geometries with a particular emphasis on using multiphase microfluidics for synthesis of particles or fibres. Going into the third dimension by fabricating microfluidic devices with several layers, producing emulsions can also be achieved by so-called 'step emulsification', the physical mechanisms behind which are described by Dangla et al. Tran and co-workers move a considerable step towards applicability of water-in-oil emulsions for biological research and review ultrahigh-throughput methods used for bio-assays. The article by Lagus et al focuses this topic specifically on single-cell experiments. Whereas it is very popular to use emulsions with drop sizes of a few tens of micrometers as 'tiny test tubes' they may also serve as templates for materials fabrication. Gundabala and co-workers combine both aspects by producing so-called 'celloidosomes', which consist of liquid drops decorated with yeast cells at the outer interface. Wang et al fabricate microcrawlers that can be thermally set in motion. Finally, Holtze gives a perspective on the possibility to upscale and apply such methods in industry. The choice of papers shows the wide and diverse applicability of microfluidics in various fields of research. While microfluidics started out as a 'niche' technique for very specific applications and as a tool in fundamental soft and biological matter research, the advancements made during recent years promise further progress in the chemical industry, biomedicine and pharmacology. Advantages such as low sample consumption, single cell accessibility and controlled experimental parameters in general may in the future be exploited for real industrial sized applications. In Journal of Physics D: Applied Physics we find a journal that is ideally positioned to give applied microfluidics research a wide readership across many disciplines. In the publication of this special issue we hope to inspire and encourage microfluidics researchers, and to promote interdisciplinary collaborations. We would like to thank all of the authors for their excellent contributions to this special issue.

Sarah Kster

2013-01-01T23:59:59.000Z

329

Electronics Industry: Markets & Issues  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electronics Industry: Markets & Issues Electronics Industry: Markets & Issues Speaker(s): William M. Smith Date: March 17, 1998 - 12:00pm Location: 90-3148 Seminar Host/Point of Contact: Richard Sextro Electronics represents a unique opportunity to get in on the beginning of an incredible growth spurt, for an already huge industry; $400 billion/year in the U.S. now, moving up by 10%-20% per year in several sectors. This is quite unlike many other U.S. industrial sectors, which often involve mature businesses requiring assistance to stay afloat. The potential for forming business partnerships with electronics firms to deal with issues in energy efficiency, water availability/quality, air quality, productivity/yield, HVAC, power quality, wastewater, air emissions, etc., is staggering. The industrys oligopic nature provides serious opportunities

330

ConEd (Gas) - Commercial and Industrial Energy Efficiency Program |  

Broader source: Energy.gov (indexed) [DOE]

ConEd (Gas) - Commercial and Industrial Energy Efficiency Program ConEd (Gas) - Commercial and Industrial Energy Efficiency Program ConEd (Gas) - Commercial and Industrial Energy Efficiency Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Construction Design & Remodeling Manufacturing Other Appliances & Electronics Water Heating Maximum Rebate Large Commercial Energy Study: 50,000 (gas); 67,000 (combined with electric) VFD: 12,000 Program Info Expiration Date 12/31/2015 State New York Program Type Utility Rebate Program Rebate Amount Energy Study: 50% of the cost Custom: $1/therm at less than 20% savings; $2/therm at greater than 20% savings Control/Automation Systems: $2/therm saved, up to 50% of cost

331

US Energy Service Company Industry: History and Business Models  

Broader source: Energy.gov (indexed) [DOE]

Energy Service Company Industry: Energy Service Company Industry: History and Business Models Don Gilligan President, NAESCO May 6, 2011 Overview of Presentation * US ESCO industry evolution: Five phases * Business models in each phase * Financing models in each phase * Factors that forced change to next phase * Lessons learned US ESCO Industry: Five Phases * Pre-1985: The Beginning of Large-scale Energy Efficiency (EE) * 1985-1995: Early ESCo experience * 1995-2000: Consolidation and Growth * 2000-2004: Setbacks * 2004 - present: Growth and new services Beginning of EE: pre-1985 * Federal government mandates utilities to provide energy conservation * Business model: ESCOs provide services - Energy audits, arranging contracting, etc. * Finance model: fee for service - Utilities pay ESCOs for services

332

A Snapshot of the Texas Aerospace Industry and a Comparison of Competitor States  

E-Print Network [OSTI]

-related employees make up approximately 2% of the workforce. The Texas Space Grant Consortium is comprised of 34 institutions that participate in various activities targeted towards the aerospace industry including Space Explorers, San Antonio Best, and NASA.... In order to quantify the aerospace industry, Standard Industrial Classification (SIC) codes associated with the definition were requested from each state. Under general headings these include manufacturing for electronic & other electric equipment...

Ario, Shannon; Elliott, Elizabeth; Gray, Kevin; Hemmeline, Charles; Pomeroy, Dan; White, Andrew; Zurawski, Paul

2002-01-01T23:59:59.000Z

333

National Fuel - Large Non-Residential Conservation Program | Department of  

Broader source: Energy.gov (indexed) [DOE]

National Fuel - Large Non-Residential Conservation Program National Fuel - Large Non-Residential Conservation Program National Fuel - Large Non-Residential Conservation Program < Back Eligibility Commercial Industrial Institutional Local Government Nonprofit Schools Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Construction Commercial Weatherization Design & Remodeling Other Manufacturing Appliances & Electronics Water Heating Maximum Rebate Commercial Custom Rebates: $200,000 Industrial Custom Rebates: $5,000,000 Program Info State New York Program Type Utility Rebate Program Rebate Amount Custom Rebates: $15/Mcf x the gas savings or 50% of the total project cost Unit Heater: $1000 Hot Air Furnace: $500 Low Intensity Infrared Heating: $500 Programmable Thermostat: $25

334

AN OPTIMIZER IN THE TELECOMMUNICATIONS INDUSTRY MAURICIO G. C. RESENDE  

E-Print Network [OSTI]

AN OPTIMIZER IN THE TELECOMMUNICATIONS INDUSTRY MAURICIO G. C. RESENDE Abstract. This article laboratory at AT&T, a large telecommunications company. The article will appear in the Fall 2007 issue of telecommunications in modern life in the last 100 years is remark- able. Telecommunications has evolved from

Resende, Mauricio G. C.

335

A SYSTEMS APPROACH TO MATHEMATICAL MODELING OF INDUSTRIAL PROCESSES  

E-Print Network [OSTI]

/or partial automation of the creative modeling process. Model Generation is a new modeling paradigm designed specifically for rapid modeling of large multi-scale systems in the industrial practice. It proposes model. Keywords: Dynamic and continuous/discrete simulation, computer-aided modeling, symbolic

Linninger, Andreas A.

336

The Clinch Bend Regional Industrial Site and economic development opportunities  

SciTech Connect (OSTI)

This effort focuses initially on the Clinch Bend site. Other sites and developable tracts of land are identified with the assistance of communities in proximity to Oak Ridge, the State of Tennessee, and others, and compared with the projected site requirements for large industrial facilities.

NONE

1995-12-31T23:59:59.000Z

337

WSN Evaluation in Industrial Environments First results and lessons learned  

E-Print Network [OSTI]

-- an oil refinery in Portugal. In this paper we first present our testbed. Then we introduce our solution to access, debug and flash the sensor nodes remotely from an operations room in the plant or from any results from the refinery testbed. I. INTRODUCTION Large industrial sites need good means for monitoring

Sreenan, Cormac J.

338

Opportunities and Experiences in Implementing the Recycling Methods for Industrial Water Supply in Bulgaria  

Science Journals Connector (OSTI)

In this chapter, the importance of recycling of industrial wastewater in general and in Bulgaria is explained. The necessary preconditions for water recycling, i.e. environmental, technical and economical ... The...

Plamen Stoychev

2011-01-01T23:59:59.000Z

339

IMPACTS: Industrial Technologies Program, Summary of Program Results for CY2009, Appendix 5: Method of Calculating Results for the Save Energy Now Initiative  

Broader source: Energy.gov (indexed) [DOE]

181 DOE Industrial Technologies Program 181 DOE Industrial Technologies Program Appendix 5: Method of Calculating Results for the Save Energy Now Initiative u Large Plant Assessments .................................................................................................................................................................... 182 u Training .............................................................................................................................................................................................. 183 u Software Tools Distribution................................................................................................................................................................ 183

340

Commercial Aircraft Corporation of China (Comac) attempts to break the Airbus-Boeing duopoly, will it succeed? : an industry analysis framework applied  

E-Print Network [OSTI]

Using an industry analysis framework, this thesis analyzes whether the recently established Commercial Aircraft Corporation of China (Comac) is likely to break the Boeing-Airbus duopoly in the industry of large commercial ...

Fuentes, Jose L., S.M. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Advanced Manufacturing Office: Industrial Assessment Centers (IACs)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Assessment Industrial Assessment Centers (IACs) to someone by E-mail Share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Facebook Tweet about Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Twitter Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Google Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Delicious Rank Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Digg Find More places to share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on AddThis.com... Industrial Assessment Centers (IACs) Learn More Learn how companies have benefited from IAC assessments. Search the IAC Database for recommendations and savings achieved.

342

The industrial ecology of the iron casting industry  

E-Print Network [OSTI]

Metal casting is an energy and materials intensive manufacturing process, which is an important U.S. industry. This study analyzes iron casting, in particular, for possible improvements that will result in greater efficiencies ...

Jones, Alissa J. (Alissa Jean)

2007-01-01T23:59:59.000Z

343

Office of Industry Research and Technology Programs Greetings to Industry  

E-Print Network [OSTI]

vehicles. They have a strong research base and are sup- ported by the U. S. Department of Energy. They have. Cheng, Industrial Engineering. 6 Centers/Laboratories Center Targets Reducing Fuel Consumption

Ginzel, Matthew

344

UNDERGRADUATE DEGREES Industrial and Systems Engineering  

E-Print Network [OSTI]

UNDERGRADUATE DEGREES Industrial and Systems Engineering The Bachelor's Degree in Industrial, consulting at amusement parks, analyzing systems, and beyond. SYSTEMS ScIENcE AND INDUSTRIAl ENGINEERING of Engineering in Industrial Engineering (MEng IE) equips graduates to be effective in industry and provides

Suzuki, Masatsugu

345

ENERGY STAR Challenge for Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Plant Industrial Plant Certification Professional Engineers' Guide for Validating Statements of Energy Performance Office of Air and Radiation Climate Protection Partnerships Division June 2013 ii Introduction The U.S. Environmental Protection Agency's ENERGY STAR program provides guidance, tools, and recognition to help companies improve the energy performance of their facilities and strengthen the effectiveness of their energy management program. Through ENERGY STAR, the U.S. Environmental Protection Agency (EPA) offers a number of forms of recognition, including certification for facility energy efficiency. ENERGY STAR certification for industrial plants recognizes individual manufacturing plants whose

346

Industrial Carbon Management Initiative (ICMI)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Carbon Management Initiative Industrial Carbon Management Initiative (ICMI) Background The ICMI project is part of a larger program called Carbon Capture Simulation and Storage Initiative (C2S2I). The C2S2I has a goal of expanding the DOE's focus on Carbon Capture Utilization and Storage (CCUS) for advanced coal power systems and other applications, including the use of petroleum coke as a feedstock for the industrial sector. The American Recovery and Re-Investment Act (ARRA)-funded

347

INDUSTRIAL SAFETY & HEALTH (ISH)  

Broader source: Energy.gov (indexed) [DOE]

HEALTH (ISH) HEALTH (ISH) OBJECTIVE ISH.1 A comprehensive industrial safety & health program has been implemented to address applicable safety requirements at the TA 55 SST Facility. (Core Requirements 1, 3, and 4) Criteria * Procedures are implemented to address applicable industrial & health safety issues. * An adequate number of trained personnel are available to support SST facility regarding industrial safety & health concerns. * Portable fire extinguishers are appropriate for the class of fire they are expected to fight and are located within the proper distance. * Cranes, hooks, slings, and other rigging are plainly marked as to their capacity and inspected prior to use. * Forklifts and other powered lifting devices are adequately inspected.

348

Industry Sponsored Research | Partnerships | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Partnering Mechanism Sample Sponsored Research Agreement SBIR-STTR Support Economic Development Industrial Partnerships University Partnerships Events and Conferences Success Stories Video Newsletters Staff Contacts Partnerships Home | Connect with ORNL | For Industry | Partnerships | Sponsored Research SHARE Sponsored Research Fiber Optic Research The Oak Ridge National Laboratory is a United States Department of Energy national laboratory, operated under contract by UT-Battelle, LLC. The laboratory's 1500+ research scientists and engineers conduct a vigorous program of scientific discovery and technology development, and ORNL is eager to engage industry in partnerships to help translate its research output into market impact and support for U.S. competitiveness. Companies wishing to learn about the research being

349

Carbon Emissions: Petroleum Refining Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Petroleum Refining Industry Petroleum Refining Industry Carbon Emissions in the Petroleum Refining Industry The Industry at a Glance, 1994 (SIC Code: 2911) Total Energy-Related Emissions: 79.9 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 21.5% -- Nonfuel Emissions: 16.5 MMTC Total First Use of Energy: 6,263 trillion Btu -- Pct. of All Manufacturers: 28.9% Nonfuel Use of Energy Sources: 3,110 trillion Btu (49.7%) -- Naphthas and Other Oils: 1,328 trillion Btu -- Asphalt and Road Oil: 1,224 trillion Btu -- Lubricants: 416 trillion Btu Carbon Intensity: 12.75 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey", "Monthly Refinery Report" for 1994, and Emissions of Greenhouse Gases in the United States 1998.

350

Export.gov - By Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

By Industry By Industry Print | E-mail Page Export Information By Industry Export.gov offers a wide range of current industry and trade information to help exporters of U.S goods and services find the information they need to compete successfully in overseas markets. Four Essential Resources 1. Export Assistance. The U.S. & Foreign Commercial Service is the trade promotion arm of the U.S. Department of Commerce's International Trade Administration. Commercial Service trade professionals in more than100 U.S. cities and in nearly 80 countries help U.S. companies to start exporting or increase sales to new global markets. Commercial Service services include: Market Intelligence , Trade Counseling , Business Matchmaking, and more. 2. Trade Data & Analysis. Trade data can help companies identify the best

351

CALIFORNIA ENERGY PETROLEUM INDUSTRY INFORMATION  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION PETROLEUM INDUSTRY INFORMATION REPORTING ACT (PIIRA) PROGRAM REPORTING PETROLEUM AND NON-PETROLEUM ................................................... 40 PRODUCT DEFINITIONS Major Petroleum Product Storer and Terminal Weekly Report Major petroleum product storers, terminal

352

Changing Trends in Telecommunications Industry  

E-Print Network [OSTI]

The mobile telecommunication industry is one of the fastest growing and continually changing markets in the world today. The greatest achievement of wireless technology is that it has made communications possible in the most remote of places at a...

Sathyanarayanan, Ramachandran

2010-12-17T23:59:59.000Z

353

Big Picture 19912012 other industry  

E-Print Network [OSTI]

% Academic 49% Research 8% Consulting 11% Finance 12% other industry 20% Where are the ORC Ph.D. graduates Semiconductors Lincoln Vale NonAcademic Jobs Small Firms Big Firms ORC Alumni Startups Academic 49% Research 8

354

Electrified Separation Processes in Industry  

E-Print Network [OSTI]

For any separation procedure in the chemical industry, a certain amount of reversible work in the form of free energy is required, as dictated by the second law of thermodynamics. Classical techniques for effecting liquid-phase separations...

Appleby, A. J.

1983-01-01T23:59:59.000Z

355

Integrated Industrial Wood Chip Utilization  

E-Print Network [OSTI]

The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

Owens, E. T.

1984-01-01T23:59:59.000Z

356

Electric Utility Industrial Conservation Programs  

E-Print Network [OSTI]

Electrical Machinery and Equip. 7.0 3.3 3 7.6 3.0 10 7 0 10.8 100.0 90 11.9 100.0 353,5 4 * Total of 12 Industry Maximum Demand s is 832 MW. *..', Total of 12 Industry Annual Electricity Consumption is 2,981,090 Mlm. 723 ESL-IE-83-04-114 Proceedings... Electrical Machinery and Equip. 7.0 3.3 3 7.6 3.0 10 7 0 10.8 100.0 90 11.9 100.0 353,5 4 * Total of 12 Industry Maximum Demand s is 832 MW. *..', Total of 12 Industry Annual Electricity Consumption is 2,981,090 Mlm. 723 ESL-IE-83-04-114 Proceedings...

Norland, D. L.

1983-01-01T23:59:59.000Z

357

The steam engine and industrialization  

E-Print Network [OSTI]

Simon Schaffer in York Rail Museum talks to the camera about the relationship between the steam engine and industrialization and whatsteam meant; a regular supply of moving power for workshops and factories....

Dugan, David

2004-08-17T23:59:59.000Z

358

Outlook for Industrial Energy Benchmarking  

E-Print Network [OSTI]

The U.S. Environmental Protection Agency is exploring options to sponsor an industrial energy efficiency benchmarking study to identify facility specific, cost-effective best practices and technologies. Such a study could help develop a common...

Hartley, Z.

359

Industrial Plans for AEO2014  

U.S. Energy Information Administration (EIA) Indexed Site

you for your attention 10 Industrial Team Washington DC, July 30, 2013 Macro Team: Kay Smith (202) 586-1132 | kay.smith@eia.gov Vipin Arora (202) 586-1048 | vipin.arora@eia.gov...

360

KNOWLEDGE MANAGEMENT FOR INDUSTRIAL SAFETY, GENERIC RESOURCE PLATFORM COMBINED WITH AN ONTOLOGY BASED APPROACH  

E-Print Network [OSTI]

safety culture to enable effective use of available knowledge for the prevention of major accidentsKNOWLEDGE MANAGEMENT FOR INDUSTRIAL SAFETY, GENERIC RESOURCE PLATFORM COMBINED WITH AN ONTOLOGY to manage risks and maintain industrial safety is largely based on the capacity of various actors to acquire

Boyer, Edmond

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Influence of combustion parameters on NOx production in an industrial boiler  

E-Print Network [OSTI]

Influence of combustion parameters on NOx production in an industrial boiler M.A. Habib a,*, M pollution using a model furnace of an industrial boiler utilizing fuel gas. The importance of this problem is mainly due to its relation to the pollutants produced by large boiler furnaces used widely in thermal

Aldajani, Mansour A.

362

Advanced engineering design as practiced today from the view point of the CERN Industrial Liaison Officer  

E-Print Network [OSTI]

After an introduction about CERN, a brief description of the Large Hadron Collider(LHC) it is reviewed. Pros and cons of a few advanced engineering design cases are taken in consideration together with the involvement of the European Industry. The conclusion is that the LHC project has been an important driving force for Innovation in European Industry.

Barone, Michele

2012-01-01T23:59:59.000Z

363

Non-ferrous Metals Industry Energy Management System Certification  

Broader source: Energy.gov (indexed) [DOE]

ferrous Metals Industry ferrous Metals Industry Energy Management System Certification China Quality Certification Center Zhigang Wang 1. Importance Energy Management System 2. Pilot Programs of Energy Management System Certification Contents China Quality Certification Center A professional certification body under the General Administration of Quality Supervision, Inspection and Quarantine of the PRC. Member of the following international organizations: IECEE and IQNet. CQC provides the following services; System certification, Product certification and Training . Main Qualifications -State authorized administrator of the Energy Conservation Label -Provides compulsory product certification as outlined by the Certification and Accreditation Administration(CNCA) of the PRC

364

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING  

E-Print Network [OSTI]

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2010/2011 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH)...................................................................................................1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

Mountziaris, T. J.

365

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING  

E-Print Network [OSTI]

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2009/2010 September).................1 . REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING (30 CREDITS)...............1 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

Mountziaris, T. J.

366

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING  

E-Print Network [OSTI]

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2013/2014 September..............................3 C. COURSE REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS............................4 E. DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH

Massachusetts at Amherst, University of

367

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING  

E-Print Network [OSTI]

GRADUATE STUDENT INFORMATION MECHANICAL AND INDUSTRIAL ENGINEERING DEPARTMENT 2011/2012 September).................1 REQUIREMENTS FOR A MASTER OF SCIENCE DEGREE IN INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH (30).....................................................................................................2 DUAL MASTER IN BUSINESS ADMINISTRATION AND INDUSTRIAL ENGINEERING (72 CREDITS

Mountziaris, T. J.

368

Canada's Voluntary Industrial Energy Conservation Program  

E-Print Network [OSTI]

Industrial Energy Conservation in Canada is organized and promoted through a voluntary program that is administered by industry. Industry is divided into fifteen sectors, each of which is represented by a Voluntary Task Force. Information exchange...

Wolf, C. A., Jr.

1980-01-01T23:59:59.000Z

369

Recent Advancements in Energy-Saving Technologies for the Metallurgical and Mining Industries  

Science Journals Connector (OSTI)

A large portion of the collected articles are dedicated to address the technological advancements and convention-defying concepts for the iron and steel industry. In the article titled Methods for Calculating Energy

Cong Wang

2014-09-01T23:59:59.000Z

370

Characterization of the U.S. Industrial/Commercial Boiler Population- Final Report, May 2005  

Broader source: Energy.gov [DOE]

The U.S. industrial and commercial sectors consume large quantities of energy. Much of this energy is used in boilers to generate steam and hot water. This 2005 report characterizes the boilers in...

371

Waterfront views : defining a new planning process for Brooklyn's post-industrial waterfronts  

E-Print Network [OSTI]

The study of waterfront planning largely focuses on the physical reconnection of the post-industrial, downtown waterfront with the spatial fabric of the city. Attention is given to the need for clarity of regulations, ...

Grassi, Carrie

2006-01-01T23:59:59.000Z

372

A decomposition analysis of carbon dioxide emissions in the Chinese nonferrous metal industry  

Science Journals Connector (OSTI)

The nonferrous metal industry (NMI) of China consumes large amounts of energy and associated emissions of carbon dioxide (CO 2) are very high. Actions to reduce CO 2 emissions and ener...

Y. Shi; T. Zhao

2014-11-01T23:59:59.000Z

373

Evolving trend of consolidation in the banking industry : strategies of Mitsubishi UJF Financial Group  

E-Print Network [OSTI]

Consolidation in the financial industry has progressed rapidly in many countries. In the United States, large financial corporations, such as Citigroup and JP Morgan Chase, formed complex financial groups and conglomerate ...

Kogure, Takeshi

2006-01-01T23:59:59.000Z

374

Concrete Industry Benefits from Ancient Romans and the ALS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Concrete Industry Benefits from Concrete Industry Benefits from Ancient Romans and the ALS Concrete Industry Benefits from Ancient Romans and the ALS Print Thursday, 17 October 2013 14:24 Cement production - the mainstay of the modern concrete industry - is one of the primary sources of carbon dioxide emissions worldwide. Making cement essentially requires burning rock, an extremely energy-intensive process that releases a large amount of carbon into the atmosphere. In an effort to reduce its carbon footprint, the industry has begun to move toward new concrete "recipes" that incorporate environmentally friendly supplemental cementitious materials (SCMs), which partially replace Portland cement and reduce its use. The challenge is to maintain, or even increase, the end product's strength and durability while becoming more environmentally sustainable. Ancient Rome, without the impetus of modern environmental concerns, had a lot of this figured out. New insights into the Romans' ingenious concrete harbor structures now emerging from ALS beamline research could move the modern concrete industry toward its goal.

375

Concrete Industry Benefits from Ancient Romans and the ALS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Concrete Industry Benefits from Concrete Industry Benefits from Ancient Romans and the ALS Concrete Industry Benefits from Ancient Romans and the ALS Print Thursday, 17 October 2013 14:24 Cement production - the mainstay of the modern concrete industry - is one of the primary sources of carbon dioxide emissions worldwide. Making cement essentially requires burning rock, an extremely energy-intensive process that releases a large amount of carbon into the atmosphere. In an effort to reduce its carbon footprint, the industry has begun to move toward new concrete "recipes" that incorporate environmentally friendly supplemental cementitious materials (SCMs), which partially replace Portland cement and reduce its use. The challenge is to maintain, or even increase, the end product's strength and durability while becoming more environmentally sustainable. Ancient Rome, without the impetus of modern environmental concerns, had a lot of this figured out. New insights into the Romans' ingenious concrete harbor structures now emerging from ALS beamline research could move the modern concrete industry toward its goal.

376

Aftertreatment Research Prioritization: A CLEERS Industrial Survey...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Research Prioritization: A CLEERS Industrial Survey Aftertreatment Research Prioritization: A CLEERS Industrial Survey Presentation given at the 2007 Diesel Engine-Efficiency &...

377

EIS-0428: Mississippi Gasification, LLC, Industrial Gasification...  

Broader source: Energy.gov (indexed) [DOE]

8: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS EIS-0428: Mississippi Gasification, LLC, Industrial Gasification Facility in Moss Point, MS...

378

CRV industrial Ltda | Open Energy Information  

Open Energy Info (EERE)

CRV industrial Ltda Place: Carmo do Rio Verde, Goias, Brazil Sector: Biomass Product: Ethanol and biomass energy producer References: CRV industrial Ltda1 This article is a...

379

Rotation With Industry | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Industry Rotation With Industry 7ROTATIONWITHINDUSTRY.pdf More Documents & Publications Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialROTATIONWITHINDUSTRY.doc...

380

Grand Challenge Portfolio: Driving Innovations in Industrial...  

Broader source: Energy.gov (indexed) [DOE]

Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January...

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

California Solar Energy Industries Association | Open Energy...  

Open Energy Info (EERE)

Solar Energy Industries Association Jump to: navigation, search Name: California Solar Energy Industries Association Place: Rio Vista, California Zip: 94571 Sector: Solar Product:...

382

Colorado State University Industrial Assessment Center Saves...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

audit. | Photo courtesy of University of Missouri IAC. Industrial Assessment Centers Train Future Energy-Savvy Engineers Industrial Assessment Centers Help Students, Communities...

383

Industrial Energy Efficiency Projects Improve Competitiveness...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Industrial Energy Efficiency Projects Improve Competitiveness and Protect Jobs Industrial Energy Efficiency Projects Improve Competitiveness and Protect Jobs U.S. Department of...

384

Plastic Magen Industry | Open Energy Information  

Open Energy Info (EERE)

Plastic Magen Industry Jump to: navigation, search Name: Plastic Magen Industry Place: Kibbutz Magen, Israel Zip: 85465 Sector: Solar Product: Manufactures plastic products with a...

385

Industrial Assessment Centers Quarterly Update, Spring 2014 ...  

Broader source: Energy.gov (indexed) [DOE]

Assessment Centers Quarterly Update, Spring 2014 Read the Industrial Assessment Centers (IAC) Quarterly Update -- Spring 2014 Industrial Assessment Centers (IAC) Quarterly Update...

386

Green Industrial Policy: Trade and Theory  

E-Print Network [OSTI]

Papers Year 2012 Paper 1126 Green Industrial Policy: Trade 2012 by author(s). Green Industrial Policy: Trade andreality and the potential for green indus- trial policy. We

Karp, Larry; Stevenson, Megan

2012-01-01T23:59:59.000Z

387

PIA - Industrial Hygiene Analytical System (IHAS) | Department...  

Broader source: Energy.gov (indexed) [DOE]

Hygiene Analytical System (IHAS) PIA - Industrial Hygiene Analytical System (IHAS) PIA - Industrial Hygiene Analytical System (IHAS) More Documents & Publications PIA - INL...

388

Industrial Energy Efficiency: Designing Effective State Programs...  

Office of Environmental Management (EM)

State Programs for the Industrial Sector This report provides state regulators, utilities, and other program administrators an overview of the spectrum of U.S. industrial...

389

TG Agro Industrial | Open Energy Information  

Open Energy Info (EERE)

to: navigation, search Name: TG Agro Industrial Place: Brazil Product: Maranhao-based ethanol producer. References: TG Agro Industrial1 This article is a stub. You can help...

390

Geothermal Energy Association Annual Industry Briefing: 2015...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Geothermal Energy Association Annual Industry Briefing: 2015 State of Geothermal Geothermal Energy Association Annual Industry Briefing: 2015 State of Geothermal February 24, 2015...

391

Cardinal Glass Industries | Open Energy Information  

Open Energy Info (EERE)

Cardinal Glass Industries Jump to: navigation, search Name: Cardinal Glass Industries Place: Eden Prairie, Minnesota Zip: 55344 Product: Minnesota-based glass products maker. The...

392

Industrial development in Qatar: a geographical assessment.  

E-Print Network [OSTI]

??Before oil discovery and exploitation, industry in Qatar took the form of artisanal activities and traditional crafts. Since the 1960's industry has become modernised, complex (more)

Al-Kubaisi, Mohammed Ali M.

1984-01-01T23:59:59.000Z

393

Energy Efficiency and Management in Industries.  

E-Print Network [OSTI]

?? The judicious use of energy by industries is a key lever for ensuring a sustainable industrial development. The cost effective application of energy management (more)

Apeaning, Raphael Wentemi

2012-01-01T23:59:59.000Z

394

Toray Industries Inc | Open Energy Information  

Open Energy Info (EERE)

Industries Inc Jump to: navigation, search Name: Toray Industries Inc Place: Tokyo, Japan Zip: 103 8666 Sector: Carbon, Vehicles, Wind energy Product: String representation "A...

395

Generalized teleportation and entanglement recycling  

E-Print Network [OSTI]

We introduce new teleportation protocols which are generalizations of the original teleportation protocols that use the Pauli group [Bennett, et al. Physical Review Letters, 70(13) 1895-1899] and the port-based teleportation protocols, introduced by Hiroshima and Ishizaka [Physical Review Letters, 101(24) 240501], that use the symmetric permutation group. We derive sufficient condition for a set of operations, which in general need not form a group, to give rise to a teleportation protocol and provide examples of such schemes. This generalization leads to protocols with novel properties and is needed to push forward new schemes of computation based on them. Port-based teleportation protocols and our generalizations use a large resource state consisting of N singlets to teleport only a single qubit state reliably. We provide two distinct protocols which recycle the resource state to teleport multiple states with error linearly increasing with their number. The first protocol consists of sequentially teleporting qubit states, and the second teleports them in a bulk.

Sergii Strelchuk; Micha? Horodecki; Jonathan Oppenheim

2012-09-12T23:59:59.000Z

396

DOE Awards $18.3 Million to Nuclear Industry Consortia for GNEP Studies |  

Broader source: Energy.gov (indexed) [DOE]

8.3 Million to Nuclear Industry Consortia for GNEP 8.3 Million to Nuclear Industry Consortia for GNEP Studies DOE Awards $18.3 Million to Nuclear Industry Consortia for GNEP Studies March 28, 2008 - 11:49am Addthis Today's announcement follows DOE's award of $16 million last September WASHINGTON, DC - The U.S. Department of Energy (DOE) this week awarded $18.3 million to four industry teams to further develop plans for an initial nuclear fuel recycling center and advanced recycling reactor as part of the Global Nuclear Energy Partnership (GNEP). Today's awards include $5.9 million to EnergySolutions; $5.7 million to the International Nuclear Recycling Alliance, led by AREVA and Mitsubishi Heavy Industries; $5.5 million to General Electric-Hitachi; and $1.3 million to General Atomics. These firms will further develop detailed studies that build on

397

DOE Awards $18.3 Million to Nuclear Industry Consortia for GNEP Studies |  

Broader source: Energy.gov (indexed) [DOE]

DOE Awards $18.3 Million to Nuclear Industry Consortia for GNEP DOE Awards $18.3 Million to Nuclear Industry Consortia for GNEP Studies DOE Awards $18.3 Million to Nuclear Industry Consortia for GNEP Studies March 28, 2008 - 11:49am Addthis Today's announcement follows DOE's award of $16 million last September WASHINGTON, DC - The U.S. Department of Energy (DOE) this week awarded $18.3 million to four industry teams to further develop plans for an initial nuclear fuel recycling center and advanced recycling reactor as part of the Global Nuclear Energy Partnership (GNEP). Today's awards include $5.9 million to EnergySolutions; $5.7 million to the International Nuclear Recycling Alliance, led by AREVA and Mitsubishi Heavy Industries; $5.5 million to General Electric-Hitachi; and $1.3 million to General Atomics. These firms will further develop detailed studies that build on

398

Idaho Power - Large Commercial Custom Efficiency Program | Department of  

Broader source: Energy.gov (indexed) [DOE]

Large Commercial Custom Efficiency Program Large Commercial Custom Efficiency Program Idaho Power - Large Commercial Custom Efficiency Program < Back Eligibility Agricultural Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Manufacturing Other Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Commercial and Industrial: 70% of project cost Custom Incentive for Existing Irrigation System Replacement: up to 75% of the total project cost Custom Incentive for a New Irrigation System: up to 10% of the total project cost Program Info Funding Source Conservation Program Funding Charge State Idaho Program Type Utility Rebate Program Rebate Amount Commercial and Industrial: $0.12/kWh saved Agricultural Irrigation Efficiency: $0.25/annual kWh saved or $450/kW

399

Sector-specific issues and reporting methodologies supporting the General Guidelines for the voluntary reporting of greenhouse gases under Section 1605(b) of the Energy Policy Act of 1992. Volume 1: Part 1, Electricity supply sector; Part 2, Residential and commercial buildings sector; Part 3, Industrial sector  

SciTech Connect (OSTI)

DOE encourages you to report your achievements in reducing greenhouse gas emissions and sequestering carbon under this program. Global climate change is increasingly being recognized as a threat that individuals and organizations can take action against. If you are among those taking action, reporting your projects may lead to recognition for you, motivation for others, and synergistic learning for the global community. This report discusses the reporting process for the voluntary detailed guidance in the sectoral supporting documents for electricity supply, residential and commercial buildings, industry, transportation, forestry, and agriculture. You may have reportable projects in several sectors; you may report them separately or capture and report the total effects on an entity-wide report.

Not Available

1994-10-01T23:59:59.000Z

400

Assessment of industrial attitudes toward generic research needs in tribology  

SciTech Connect (OSTI)

Based on extended discussions during visits with 27 companies representing 13 different parts of the tribology industry (such as bearings, lubricants, coatings, powerplants), it is apparent that only a tiny fraction of the large sums publicly reported as R and D expenditures by industry are used to fund generic tribology research. For example, of the greater than $2 B expenditures reported for R and D in the lubricants sector for 1982, the estimated total for generic tribology research was $12 M. This was the largest expenditure in any sector of the tribology industry and one-third of the total of $36 M. In the automotive industry out of a reported expenditure of $4 B, the estimated generic tribology research was $3 M. In some segments of the tribology industry, for example coatings and filters, there were no expenditures on generic research. There was little tendency to improve the state of the art of the tribology industry through long-term investment in generic R and D in ways that would foster innovation and productivity of energy conservation technology. Expenditures were oriented to development of specific commercial and military products, or to basic research focused on unspecified far term results, although useful spin-off of military developments into commercial fields sometimes occurs. There was a broad consensus in the companies visited that existing research results were not always made easily accessible to potential users in industry. The implication was that industry might benefit more if a larger fraction of the funds were devoted to putting the research results into a form design and development engineers could more readily apply. The need for a more effective presentation of research results was expressed with greater urgency at the smaller companies, but there seemed to be a broad consensus on the need for improvement. Recommendations are given.

Sibley, L.B.; Zlotnick, M.; Levinson, T.M.

1985-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

402

Maintaining Generation Adequacy in a Restructuring U.S. Electricity Industry  

SciTech Connect (OSTI)

Historically, decisions on the amounts, locations, types, and timing of investments in new generation have been made by vertically integrated utilities with approval from state public utility commissions. As the U.S. electricity industry is restructured, these decisions are being fragmented and dispersed among a variety of organizations. As generation is deregulated and becomes increasingly competitive, decisions on whether to build new generators and to retire, maintain, or repower existing units will increasingly be made by unregulated for-profit corporations. These decisions will be based largely on investor assessments of future profitability and only secondarily on regional reliability requirements. In addition, some customers will choose to face real-time (spot) prices and will respond to the occasionally very high prices by reducing electricity use at those times. Market-determined generation levels will, relative to centrally mandated reserve margins, lead to: (1) more volatile energy prices; (2) lower electricity costs and prices; and (3) a generation mix with more baseload, and less peaking, capacity. During the transition from a vertically integrated, regulated industry to a deintegrated, competitive industry, government regulators and system operators may continue to impose minimum-installed-capacity requirements on load-serving entities. As the industry gains experience with customer responses to real-time pricing and with operation of competitive intrahour energy markets, these requirements will likely disappear. We quantitatively analyzed these issues with the Oak Ridge Competitive Electricity Dispatch model (ORCED). Model results show that the optimal reserve margin depends on various factors, including fuel prices, initial mix of generation capacity, and customer response to electricity prices (load shapes and system load factor). Because the correct reserve margin depends on these generally unpredictable factors, mandated reserve margins might be too high, leading to higher electricity costs and prices. Absent mandated reserve margins, electricity prices and costs decline with increasing customer response to prices during high-demand periods. The issues discussed here are primarily transitional rather than enduring. However, the transition from a highly regulated, vertically integrated industry to one dominated by competition is likely to take another five to ten years.

Hirst, E.; Hadley, S.

1999-10-01T23:59:59.000Z

403

DOE General Competencies  

Broader source: Energy.gov [DOE]

The DOE General Competencies are the personal and professional attributes that are critical to successful performance. A competency model is a collection of competencies that together define...

404

General User Proposals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Proposals Print General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS or the Participating Research...

405

Wood/coal cofiring in industrial stoker boilers  

SciTech Connect (OSTI)

Realizing that a significant reduction in the global emissions of fossil carbon dioxide may require the installation of a wide variety of control technologies, options for large and small boilers are receiving attention. With over 1,500 coal-fired stoker boilers in the US, biomass co-firing is of interest, which would also open markets for waste wood which is presently landfilled at significant costs ranging from $20--200/ton. While much cofiring occurs inside the fence, where industrial firms burn wastes in their site boilers, other opportunities exist. Emphasis has been placed on stoker boilers in the northeastern US, where abundant supplies of urban wood waste are generally known to exist. Broken pallets form a significant fraction of this waste. In 1997, the cofiring of a volumetric mixture of 30% ground broken pallet material and 70% coal was demonstrated successfully at the traveling-grate stoker boilerplant of the Pittsburgh Brewing Company. Fourteen test periods, with various wood/coal mixtures blended on site, and two extended test periods, using wood/coal mixtures blended at the coal terminal and transported by truck to the brewery, were conducted. The 30% wood/70% coal fuel was conveyed through the feed system without difficulty, and combusted properly on the grate while meeting opacity requirements with low SO{sub 2} and NO{sub x} emissions. Efforts are underway to commercialize a wood/coal blend at the brewery, to identify specific urban wood supplies in the Pittsburgh region and to conduct a demonstration at a spreader stoker.

Cobb, J.T. Jr.; Elder, W.W.; Freeman, M.C.

1999-07-01T23:59:59.000Z

406

Clean enough for industry? An airborne geophysical case study  

SciTech Connect (OSTI)

Data from two airborne geophysical surveys of the Department of Energy`s Oak Ridge Reservation (ORR) were extremely valuable in deciding whether a 1000-acre (400 hectare) parcel of the ORR should be released to the City of Oak Ridge for industrial development. Our findings, based on electromagnetic and magnetic data, were incorporated in the federally mandated Environmental Assessment Statement (EAS), and in general supported claims that this land was never used as a hazardous waste disposal site. We estimated the amount of iron required to produce each anomaly using a simple dipole model. All anomalies with equivalent sources greater than approximately 1000 kg of iron were checked in the field, and the source of all but one identified as either a bridge, reinforced concrete debris, or a similarly benign object. Additionally, some smaller anomalies (equivalent sources of roughly 500 kg) have been checked; thus far, these also have innocuous sources. Airborne video proved invaluable in identifying logging equipment as the source of some of these anomalies. Geologic noise may account for some of the remaining anomalies. Naturally occurring accumulations of magnetic minerals in the soil on the ORR have been shown to produce anomalies which, at a sensor height of 30 m, are comparable to the anomaly produced by about 500 kg of iron. By comparison, the electronic noise of the magnetic gradiometer, 0.01--0.02 nT/m, is equivalent to only about 50--100 kg of iron at a 30 m sensor height. The electromagnetic data, combined with field mapping of karst structures, provided evidence of a northeast-southwest striking conduit spanning the parcel. The possible existence of a karst conduit led the EAS authors to conclude that this is a ``sensitive hydrologic setting.`` We conclude that aerial geophysics is an extremely cost-effective, and efficient technique for screening large tracts of land for environmental characterization.

Nyquist, J.E.; Beard, L.P.

1996-02-01T23:59:59.000Z

407

Chapter 50 Division for Air Quality: General Administrative Procedures  

Broader source: Energy.gov (indexed) [DOE]

You are here You are here Home » Chapter 50 Division for Air Quality: General Administrative Procedures (Kentucky) Chapter 50 Division for Air Quality: General Administrative Procedures (Kentucky) < Back Eligibility Agricultural Commercial Construction Developer Fuel Distributor General Public/Consumer Industrial Installer/Contractor Investor-Owned Utility Municipal/Public Utility Rural Electric Cooperative Transportation Utility Program Info State Kentucky Program Type Environmental Regulations Provider Kentucky Department for Environmental Protection Chapter 50 of the Division of Air Quality section within Energy and Environment Cabinet Department For Environmental Protection outlines the general administrative procedures for maintaining air quality standards. These procedures are created in adherence to 42 USC 7410 which requires the

408

Waters; General Provisions (North Dakota) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Waters; General Provisions (North Dakota) Waters; General Provisions (North Dakota) Waters; General Provisions (North Dakota) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Savings Category Water Buying & Making Electricity Program Info State North Dakota Program Type Siting and Permitting The waters of North Dakota are understood as belonging to the public and may be appropriated for beneficial uses. However, the right to use water in

409

General Conditions Applicable to Water Discharge Permits and Procedures and  

Broader source: Energy.gov (indexed) [DOE]

General Conditions Applicable to Water Discharge Permits and General Conditions Applicable to Water Discharge Permits and Procedures and Criteria for Issuing Water Discharge Permits (Connecticut) General Conditions Applicable to Water Discharge Permits and Procedures and Criteria for Issuing Water Discharge Permits (Connecticut) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Program Info State Connecticut Program Type Siting and Permitting Provider Department of Energy and Environmental Protection

410

Alternative fuels for industrial gas turbines (AFTUR)  

Science Journals Connector (OSTI)

Environmentally friendly, gas turbine driven co-generation plants can be located close to energy consumption sites, which can produce their own fuel such as waste process gas or biomass derived fuels. Since gas turbines are available in a large power range, they are well suited for this application. Current gas turbine systems that are capable of burning such fuels are normally developed for a single specific fuel (such as natural gas or domestic fuel oil) and use conventional diffusion flame technology with relatively high levels of \\{NOx\\} and partially unburned species emissions. Recently, great progress has been made in the clean combustion of natural gas and other fossil fuels through the use of dry low emission technologies based on lean premixed combustion, particularly with respect of \\{NOx\\} emissions. The objective of the AFTUR project is to extend this capability to a wider range of potentially commercial fuel types, including those of lower calorific value produced by gasification of biomass (LHVgas in line with the European Union targets) and hydrogen enriched fuels. The paper reports preliminary progress in the selection and characterisation of potential, liquid and gas, alternative fuels for industrial gas turbines. The combustion and emission characteristics of the selected fuels will be assessed, in the later phases of the project, both in laboratory and industrial combustion chambers.

Iskender Gkalp; Etienne Lebas

2004-01-01T23:59:59.000Z

411

Industrial Buildings Tools and Resources  

Broader source: Energy.gov (indexed) [DOE]

Rolf Butters Rolf Butters Industrial Technologies Program Industrial Buildings Tools and Resources Webinar - June 11, 2009 Michael MacDonald Agenda  Introduction to Industrial Buildings Opportunity and Tools  EERE Funding, Opportunities, and Resources  Next Steps 6/11/2009 2 Facilities Energy  ITP has been working for a couple years now to develop tools to address facilities energy use, present in most plants, and about 8% of total sector energy use  First tool is a Score Card, implemented both as a stand- alone Excel file and for QuickPEP - Score Card has to be simple, so is approximate - But it can be a very important tool for scoping facilities energy use at a plant  Second tool is an adaptation of the BCHP Screening Tool, originally developed by the Distributed Energy program but

412

ENERGY STAR Challenge for Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Challenge Challenge for Industry Professional Engineers' Guide for Validating Statements of Energy Improvement Office of Air and Radiation Climate Protection Partnerships Division May 2013 Revised ii Introduction The U.S. Environmental Protection Agency's (U.S. EPA) ENERGY STAR program provides guidance, tools, and recognition to help companies improve their energy performance. ENERGY STAR is a voluntary partnership program that companies choose to join. Through ENERGY STAR, U.S. EPA offers a number of forms of recognition for achievements in energy efficiency. The ENERGY STAR Challenge for Industry recognizes individual industrial sites for achieving a 10 percent reduction in energy intensity within 5 years from the conclusion of an established baseline. To be

413

Tom Rogers Director, Industrial Partnerships  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tom Rogers, rogerstc@ornl.gov 865-241-2149 Tom Rogers, rogerstc@ornl.gov 865-241-2149 Tom Rogers Director, Industrial Partnerships and Economic Development Tom Rogers was named Director of Industrial Partnerships and Economic Development at the Oak Ridge National Laboratory in June, 2008. His responsibilities include directing engagements with industrial partners, forging new ORNL entrepreneurial support efforts, and leading a number of strategic initiatives such as the Carbon Fiber Composites Cluster and development of the Oak Ridge Science and Technology Park. Prior to joining ORNL, Tom was the founding President and CEO of Technology 2020, a national award-winning public-private partnership focused on a building a robust regional entrepreneurial support system. Tom has also served as the Executive Director of the Tennessee Technology

414

Despatch Industries | Open Energy Information  

Open Energy Info (EERE)

Despatch Industries Despatch Industries Jump to: navigation, search Name Despatch Industries Place Minneapolis, Minnesota Zip 55044 Sector Solar Product Manufacturer of infrared drying and firing furnaces used in solar cell manufacture, and other thermal processing equipment. Coordinates 44.979035°, -93.264929° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.979035,"lon":-93.264929,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

415

Reid Industries | Open Energy Information  

Open Energy Info (EERE)

Reid Industries Reid Industries Jump to: navigation, search Name Reid Industries Address PO Box 503 Place San Francisco, CA Zip 94104 Phone number 415-947-1050 Coordinates 37.7923058°, -122.4021273° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.7923058,"lon":-122.4021273,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

416

Jax Industries | Open Energy Information  

Open Energy Info (EERE)

Jax Industries Jax Industries Jump to: navigation, search Name Jax Industries Place Hillsboro, Oregon Product Developer of recharge systems for CZ process silicon ingot growers, some of which produce PV silicon feedstock. Coordinates 43.651735°, -90.341144° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.651735,"lon":-90.341144,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

417

Mechanical and Industrial Engineering John Stuart  

E-Print Network [OSTI]

Mechanical and Industrial Engineering John Stuart Paul Washburn Co-Chairs MIE IAB Meeting #12;2Mechanical and Industrial Engineering Dean Tim Anderson #12;3Mechanical and Industrial Engineering Strategic vision for growing College Goal Method Current resources #12;4Mechanical and Industrial Engineering

Mountziaris, T. J.

418

Faculty of Engineering Industrial and Manufacturing  

E-Print Network [OSTI]

Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

419

Industrial & Systems Engineering Areas of Engineering Interests  

E-Print Network [OSTI]

Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

Berdichevsky, Victor

420

What does an Industrial Engineer really do???  

E-Print Network [OSTI]

What does an Industrial Engineer really do??? #12;What you will learn · What Industrial Engineering is · Examples of Industrial Engineering (IE) activities · The advantages of an IE college degree #12;Engineering does that engineer do? Where? #12;Industrial Engineers Find a Better Way... · A better way to make

Massachusetts at Amherst, University of

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Opportunities for University-Industry Collaboration  

E-Print Network [OSTI]

Opportunities for University-Industry Collaboration: The Center for Analog and Mixed Signal-Industry Collaboration ...," November, 2009! 2! Presentation Overview" ·Background" ·Industry-University Partnership for University-Industry Collaboration ...," November, 2009! 3! Background: Personal" 1979-1983 "A.B. Engineering

McNeill, John A.

422

Industry continues to cut energy demand  

Science Journals Connector (OSTI)

The U.S.'s 10 most energy-intensive industries are continuing to reduce their energy demand, with the chemical industry emerging as a leader in industrial energy conservation, says the Department of Energy in a report to Congress.The chemical industry is ...

1981-01-12T23:59:59.000Z

423

EPICS - Experimental Physics and Industrial Control System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Security/Privacy Notice Security/Privacy Notice EPICS Home g+ EPICS Page on Google+ g+ Communities EPICS Users on Google+ Argonne National Laboratory Experimental Physics and Industrial Control System Home News About Base Modules Extensions Distributions Download EPICSv4 IRMIS Talk Bugs Documents Links Licensing Format page for printing Google Search Tech-talk EPICS Home Page EPICS is a set of Open Source software tools, libraries and applications developed collaboratively and used worldwide to create distributed soft real-time control systems for scientific instruments such as a particle accelerators, telescopes and other large scientific experiments. Sitemap Home: EPICS Home at APS News: Recent news Meetings: Collaboration meeting details Codeathons: Codeathon developer meetings About: What is EPICS anyway?

424

Two Facilities, One Goal: Advancing America's Wind Industry | Department  

Broader source: Energy.gov (indexed) [DOE]

Two Facilities, One Goal: Advancing America's Wind Industry Two Facilities, One Goal: Advancing America's Wind Industry Two Facilities, One Goal: Advancing America's Wind Industry November 27, 2013 - 1:35pm Addthis Energy Deputy Secretary Daniel Poneman speaks at the Clemson University Wind Turbine Drivetrain Testing Facility dedication in South Carolina. | Photo courtesy of Clemson University Energy Deputy Secretary Daniel Poneman speaks at the Clemson University Wind Turbine Drivetrain Testing Facility dedication in South Carolina. | Photo courtesy of Clemson University The Clemson University Wind Turbine Drivetrain Testing Facility in North Charleston, South Carolina will test large, commercial scale turbines. | Photo courtesy of Clemson University The Clemson University Wind Turbine Drivetrain Testing Facility in North

425

Two Facilities, One Goal: Advancing America's Wind Industry | Department  

Broader source: Energy.gov (indexed) [DOE]

Two Facilities, One Goal: Advancing America's Wind Industry Two Facilities, One Goal: Advancing America's Wind Industry Two Facilities, One Goal: Advancing America's Wind Industry November 27, 2013 - 1:35pm Addthis Energy Deputy Secretary Daniel Poneman speaks at the Clemson University Wind Turbine Drivetrain Testing Facility dedication in South Carolina. | Photo courtesy of Clemson University Energy Deputy Secretary Daniel Poneman speaks at the Clemson University Wind Turbine Drivetrain Testing Facility dedication in South Carolina. | Photo courtesy of Clemson University The Clemson University Wind Turbine Drivetrain Testing Facility in North Charleston, South Carolina will test large, commercial scale turbines. | Photo courtesy of Clemson University The Clemson University Wind Turbine Drivetrain Testing Facility in North

426

EM, Industry Partner to Lay Out Opportunities to Improve Contract  

Broader source: Energy.gov (indexed) [DOE]

EM, Industry Partner to Lay Out Opportunities to Improve Contract EM, Industry Partner to Lay Out Opportunities to Improve Contract Performance Following Workshop EM, Industry Partner to Lay Out Opportunities to Improve Contract Performance Following Workshop March 14, 2012 - 12:00pm Addthis WASHINGTON, D.C. - EM and its large and small business partners will implement several recommendations that emerged from a workshop held earlier this year to improve contract performance with the objective of delivering results on time and within cost. Participants in the Environmental Management Contract Performance and Management Workshop held in February proposed several opportunities to address more effective and efficient contract performance and management. Many of these opportunities are the next phase of implementation of recommendations from a similar EM-hosted workshop in 2010.

427

transportation industry | OpenEI  

Open Energy Info (EERE)

25 25 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142279625 Varnish cache server transportation industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by the transportation industry. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption

428

Industry turns its attention south  

SciTech Connect (OSTI)

The paper discusses the outlook for the gas and oil industries in the Former Soviet Union and Eastern Europe. Significant foreign investment continues to elude Russia`s oil and gas industry, so the Caspian nations of Kazakhstan and Azerbaijan are picking up the slack, welcoming the flow of foreign capital to their energy projects. Separate evaluations are given for Russia, Azerbaijan, Kazakhstan, Turkmenistan, Ukraine, Armenia, Belarus, Georgia, Lithuania, Latvia, Estonia, Moldova, Tajikstan, Uzbekistan, Albania, Bulgaria, Croatia, Czech Republic, Hungary, Poland, Romania, Slovakia, Slovenia, and Serbia.

Marhefka, D. [Russian Petroleum Investor, Moscow (Russian Federation)

1997-08-01T23:59:59.000Z

429

NICE3: Industrial Refrigeration System  

SciTech Connect (OSTI)

Energy Concepts has developed an absorption-augmented system as a cost-effective means of achieving more cooling capacity with a substantial reduction in energy consumption and greenhouse gas emissions for industrial refrigeration. It cuts fuel consumption by 30% by combining an internal combustion engine with a mechanical compression refrigeration system and an absorption refrigeration system. The absorption system is powered by engine waste heat. Conventional industrial refrigeration uses mechanical vapor compression, powered by electric motors, which results in higher energy costs. By the year 2010, the new system could cut fuel consumption by 19 trillion Btu and greenhouse emissions by more than 1 million tons per year.

Simon, P.

1999-09-29T23:59:59.000Z

430

Very Large System Dynamics Models - Lessons Learned  

SciTech Connect (OSTI)

This paper provides lessons learned from developing several large system dynamics (SD) models. System dynamics modeling practice emphasize the need to keep models small so that they are manageable and understandable. This practice is generally reasonable and prudent; however, there are times that large SD models are necessary. This paper outlines two large SD projects that were done at two Department of Energy National Laboratories, the Idaho National Laboratory and Sandia National Laboratories. This paper summarizes the models and then discusses some of the valuable lessons learned during these two modeling efforts.

Jacob J. Jacobson; Leonard Malczynski

2008-10-01T23:59:59.000Z

431

Industrial Distributed Energy: Combined Heat & Power  

Broader source: Energy.gov (indexed) [DOE]

(DOE) (DOE) Industrial Technology Program (ITP) Industrial Distributed Energy: Combined Heat & Power (CHP) Richard Sweetser Senior Advisor DOE's Mid-Atlantic Clean Energy Application Center 32% Helping plants save energy today using efficient energy management practices and efficient new technologies Activities to spur widespread commercial use of CHP and other distributed generation solutions 10% Manufacturing Energy Systems 33% Industries of the Future R&D addressing top priorities in America's most energy-intensive industries and cross-cutting activities applicable to multiple industrial subsectors 25% Industrial Distributed Energy Industrial Technical Assistance DOE ITP FY'11 Budget: $100M Knowledge development and

432

Meet with Large Businesses  

Broader source: Energy.gov (indexed) [DOE]

Meet with Large Businesses Meet with Large Businesses and learn about upcoming acquisitions! * Federal Energy Management Program (FEMP) * National Renewable Energy Laboratory (NREL) * Small Business Administration (SBA) * U.S. Department of Energy / Energy, Efficiency, and Renewable Energy (EERE) * U.S. Department of Energy / Golden Field Office (GFO) * Western Area Power Administration (WAPA) * Colorado Procurement Technical Assistance Center (PTAC)

433

Fuel cells at the crossroads : attitudes regarding the investment climate for the US fuel cell industry and a projection of industry job creation potential.  

SciTech Connect (OSTI)

Fuel Cells at the Crossroads examines financial community and fuel cell industry views on the investment climate for the fuel cell industry. It also explores the investment history of the US fuel cell industry and projects potential future job creation. The scope of the study included the transportation, stationary power generation and portable sectors. Interviews were conducted with industry and financial experts. The results of the interviews provide a snapshot of industry perspective just prior to President Bush's endorsement of a hydrogen economy in his 2003 State of the Union address. In April 2003, we conducted a spot check to test whether the State of the Union address had changed opinions. We found little change among the financial and investment communities, but some guarded new optimism among industry leaders. The general outlook of our sample was cautiously hopeful. There is no question, however, that the current climate is one of great uncertainty, particularly when compared with the enthusiasm that existed just a few years ago. Among other things: (1) Respondents generally believed that the energy industry will undergo profound change over the next few decades, resulting in some form of hydrogen economy. They acknowledged, however, that huge technology and cost hurdles must be overcome to achieve a hydrogen economy. (2) Respondents were worried about the future of the industry, including timeframes for market development, foreign competition, technical problems, and the current poor investment environment. (3) Respondents generally believed that the US federal government must provide strong leadership to ensure American leadership in the fuel cell industry. They believe that governments in Europe and Japan are highly committed to fuel cells, thus providing European and Japanese companies with significant advantages. (4) Respondents frequently mentioned several areas of concern, including the situation in Iraq, the increased commitment to fuel cells in Europe, and recent actions by Toyota and Honda.

NONE

2004-05-27T23:59:59.000Z

434

General Atomics | Open Energy Information  

Open Energy Info (EERE)

offers research, development and consulting services to the nuclear industry, including nuclear energy production, manufacturing, defense and related applications. References:...

435

OFFICE OF INSPECTOR GENERAL  

Broader source: Energy.gov (indexed) [DOE]

APP-005 APP-005 Planning for and Measuring Office of Inspector General Results FY 2002 Annual Performance Report and FY 2003 Annual Performance Plan Office of Inspector General U.S. Department of Energy Inspector General's Message We are pleased to present the Office of Inspector General's (OIG) consolidated Fiscal Year 2002 Annual Performance Report and Fiscal Year 2003 Annual Performance Plan. This document evaluates our actual Fiscal Year (FY) 2002 performance and establishes the performance goals and strategies we will pursue in FY 2003 to fulfill our mission. As mandated by the Inspector General Act, the OIG promotes the effective, efficient, and economical operation of the Department of Energy's programs and operations, including the National Nuclear Security Administration (NNSA).

436

Generalized Galilean Genesis  

E-Print Network [OSTI]

The galilean genesis scenario is an alternative to inflation in which the universe starts expanding from Minkowski in the asymptotic past by violating the null energy condition stably. Several concrete models of galilean genesis have been constructed so far within the context of galileon-type scalar-field theories. We give a generic, unified description of the galilean genesis scenario in terms of the Horndeski theory, i.e., the most general scalar-tensor theory with second-order field equations. In doing so we generalize the previous models to have a new parameter (denoted by {\\alpha}) which results in controlling the evolution of the Hubble rate. The background dynamics is investigated to show that the generalized galilean genesis solution is an attractor, similarly to the original model. We also study the nature of primordial perturbations in the generalized galilean genesis scenario. In all the models described by our generalized genesis Lagrangian, amplification of tensor perturbations does not occur as ...

Nishi, Sakine

2015-01-01T23:59:59.000Z

437

Handbook of Industrial Engineering Equations, Formulas, and Calculations  

SciTech Connect (OSTI)

The first handbook to focus exclusively on industrial engineering calculations with a correlation to applications, Handbook of Industrial Engineering Equations, Formulas, and Calculations contains a general collection of the mathematical equations often used in the practice of industrial engineering. Many books cover individual areas of engineering and some cover all areas, but none covers industrial engineering specifically, nor do they highlight topics such as project management, materials, and systems engineering from an integrated viewpoint. Written by acclaimed researchers and authors, this concise reference marries theory and practice, making it a versatile and flexible resource. Succinctly formatted for functionality, the book presents: Basic Math Calculations; Engineering Math Calculations; Production Engineering Calculations; Engineering Economics Calculations; Ergonomics Calculations; Facility Layout Calculations; Production Sequencing and Scheduling Calculations; Systems Engineering Calculations; Data Engineering Calculations; Project Engineering Calculations; and Simulation and Statistical Equations. It has been said that engineers make things while industrial engineers make things better. To make something better requires an understanding of its basic characteristics and the underlying equations and calculations that facilitate that understanding. To do this, however, you do not have to be computational experts; you just have to know where to get the computational resources that are needed. This book elucidates the underlying equations that facilitate the understanding required to improve design processes, continuously improving the answer to the age-old question: What is the best way to do a job?

Badiru, Adedeji B [ORNL; Omitaomu, Olufemi A [ORNL

2011-01-01T23:59:59.000Z

438

ME441W Flowserve Project Recap Large industrial pumps are extensively relied on in many industrial applications. Many of these  

E-Print Network [OSTI]

manufacturing processes. Recent strides in additive manufacturing have reached a point where printings of metal innovation in manufacturing technology allows for novel fin design beyond the capabilities of previous but at a much higher cost. A solution to the manufacturing limitation was resolved with the lattice fin

Demirel, Melik C.

439

Evaluating the barriers to specific industrial energy efficiency measures: an exploratory study in small and medium-sized enterprises  

Science Journals Connector (OSTI)

Abstract Industrial energy efficiency has raised to the top of European energy policy agenda, and particular efforts should be placed to tackle the barriers to energy efficiency of small and non-energy intensive industrial users. To enhance the adoption rate of a specific industrial energy efficiency measure, it is crucial to properly evaluate the barriers. Without a proper level of detail considering both the measure's specificity and the evaluation's perspective company managers are hampered when making investment decisions, and policymakers are prevented from developing the most effective policies. The paper aims at highlighting that the value of a given intervention-dependent barrier may differ when evaluating it at the company level, by technology area, or with respect to a specific measure. To achieve this objective, an exploratory investigation of Italian small and medium-sized enterprises into the metalworking sector has been performed with respect to selected cross-cutting technologies. Although general barriers appear as most relevant at the company level, large differences appear when considering intervention-dependent barriers by technology area as well as at the energy efficiency measure level. The research presents innovative results, as the literature and policymakers have not accounted so far for how the value of barriers can effectively vary with respect to a single measure, but have only considered barriers at company level. Additionally, the paper highlights that differences can be appreciated when evaluating the intervention-dependent barriers according to some firm characteristics (i.e. size, production complexity, and innovativeness). The study concludes with suggestions for policymakers as well as industrial decision-makers.

Enrico Cagno; Andrea Trianni

2014-01-01T23:59:59.000Z

440

Industrial SPP/Partner Teaming Profile - Rockwell Automation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rockwell Automation Rockwell Automation 6400 West Enterprise Drive Mequon, WI 53092 Business: Control Products & Solutions Joshua J. Olive Sr. Product Specialist Phone: 262-512-2095 Email: jjolive@ra.rockwell.com Industrial Partner General Mills 9000 Plymouth Ave. North Minneapolis, MN 55427 Business: Food Processing David Spryshak Facilities, Control, & IS Engineer Phone: 763-764-7091 Email: Dave.spryshak@genmills.com Rockwell Automation helps General Mills save $2.6 million annually through a standardized energy management system for air handling units Project Scope Rockwell Automation partnered with General Mills to develop a standardized energy management system (EMS) for controlling air handling units (AHU) and has installed the system at 14 General Mills

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

The Wool Industries Research Association  

Science Journals Connector (OSTI)

... THE report of the Director of Research for the Wool Industries Research Association for 1947-48 summarizes a five-year building plan to provide permanent ... detailed statistical analysis have covered the occurrence of slubs and faults in yarns and the scouring and milling of woollen and worsted pieces. Progress is also reported in the measurement ...

1948-06-05T23:59:59.000Z

442

Central Appalachia: Coal industry profile  

SciTech Connect (OSTI)

Central Appalachia, the most complex and diverse coal-producing region in the United States, is also the principal source of very low sulfur coal in the East. This report provides detailed profiles of companies and facilities responsible for about 90% of the area's production, conveying a unique view of the aggregate industry as well as its many parts.

McMahan, R.L.; Kendall, L.K. (Resource Data International, Inc., Boulder, CO (USA))

1991-05-01T23:59:59.000Z

443

Scientific Management in Nationalized Industries  

Science Journals Connector (OSTI)

... Boards of Nationalized Industries"*, arises out of his experience as governing director of two private engineering firms and as chairman of the British Broadcasting Corporation. It is a noteworthy ... of experience, independence and security of tenure as is common in the best concerns of private enterprise; but it is of wider importance as endorsing the stress laid on the ...

1958-02-22T23:59:59.000Z

444

Applied Research: Harwell for Industry  

Science Journals Connector (OSTI)

... of industrial research regulated by Ministry of Technology requirements, including not merely air pollution and desalination but high temperature fuel cells-a more recent recruit to what Dr Marshall calls the ... to what Dr Marshall calls the establishment's portfolio. He is plainly cheerful about the desalination programme which, he said, has made possible an improvement in the performance of multi ...

1969-05-17T23:59:59.000Z

445

Environmental Effects of Industrial Farming  

E-Print Network [OSTI]

·Water contamination ·Soil contamination ·Solutions #12;US Meat Industry Animals (2009) kg produced (2009 contamination #12;Water contamination ·~9x108 kg of dry waste produced in the US per day day in 2001 #12;Water!" #12;Air contamination ·220kg of CH4 produced in the lifetime of a cow "Smells like money!" #12;Air

Budker, Dmitry

446

Wind Power: Options for Industry  

SciTech Connect (OSTI)

This six-page brochure outlines ways for industry to integrate wind power, including assessing wind power, building wind farms, using a developer, capitalizing on technology, enhancing the corporate image, and preparing RFPs. Company examples and information resources are also provided.

Not Available

2003-03-01T23:59:59.000Z

447

working with industry Engineering and  

E-Print Network [OSTI]

of interests including: · laser physics · semiconductor optoelectronics · photonics in manufacturing · solar · micromechanics and condition monitoring · renewable energy modelling · carbon capture and storage Our institute to applied systems. We have a wide ranging programme of current work with many industrial companies in key

Painter, Kevin

448

Policies on Japan's Space Industry  

E-Print Network [OSTI]

as a strategic industry Practical space use in National Security Diplomacy ...etc Policy Administrative Structure on the Basic Space Law legislated in 2008. 1. The government sets space policy as a national strategy utilization environment Develop new markets with small size satellites and rockets Promote the serialization

449

industrial & systems (ISE) Industrial and Systems Engineers use engineering and business prin-  

E-Print Network [OSTI]

70 industrial & systems (ISE) Industrial and Systems Engineers use engineering and business prin to help companies compete in today's global marketplace. The Industrial and Systems Engineer's task Available · Industrial and Systems Engineering Bachelor of Science 129 units · Industrial and Systems

Rohs, Remo

450

Biomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial | Mechanical | Petroleum Careers in Industrial Engineering  

E-Print Network [OSTI]

| Mechanical | Petroleum Careers in Industrial Engineering Manufacturing, service and retail industries hire a significant number of industrial engineers. Specific industries include automobile manufacturers, electronics to the US Bureau of Labor Statistics, the 2012 average annual wage for industrial engineers is $82

Glowinski, Roland

451

Towards a history of the international industrial gases industry Ray Stokes, Ralf Banken, and Matthias Phl  

E-Print Network [OSTI]

industrial revolution" and their component companies. From David Landes's classic study, The Unbound of the industries of the second industrial revolution has been virtually ignored in this scholarship to date1 Towards a history of the international industrial gases industry Ray Stokes, Ralf Banken

Guo, Zaoyang

452

Innovation in the tourism industry: The case of Tourism@  

Science Journals Connector (OSTI)

The objective of the paper is to apprehend and capture the evolution of innovative activities in the tourism industry through the empirical analysis of annual Tourism@ events. Tourism@ is an important trade fair in Europe that brings together major actors related to the tourism industry, i.e.: innovative start up companies, high tech small and medium sized enterprises, large multinationals and academics. The event provides significant information on innovation in the tourism industry through a competition for the best projects awarding either new technologies or new uses of ICT applied to tourism. The database of technological innovative projects gathered during the competitions is exploited and examined in a Sectoral System of Innovation and Production framework. Three main attributes of the framework are used for the analysis of the industry: knowledge bases, actors and demand. The paper highlights the intensity of innovation activity in tourism, and gives evidence about the rapid evolution of the tourism industry as well as the substantial impact of ICT on this evolution.

Bndicte Aldebert; Rani J. Dang; Christian Longhi

2011-01-01T23:59:59.000Z

453

Automatic control in petroleum, petrochemical and desalination industries  

SciTech Connect (OSTI)

This is the second IFAC workshop on the subject of Automatic Control in Oil and Desalination Industries. Presentations and discussions underscored the priorities of oil and desalination industries in getting better overall quality, improved energy use, lower cost, and better safety and security. These factors will take on added importance to oil exporting nations that have been hit recently by large oil price declines, which are forcing them to improve the efficiency of their industries and rationalize all new capital expenditures. Papers presented at the workshop included reviews of theoretical developments in control and research in modelling, optimization, instrumentation and control. They included the latest developments in applications of control systems to petroleum, petrochemical and desalination industries such as refineries, multi-stage flash desalination, chemical reactors, and bioreactors. The papers covered the latest in the applications of adaptive control, robust control, decentralized control, bilinear control, measurement techniques, plant optimization and maintenance, and artificial intelligence. Several case studies on modernization of refineries and controls and its economics were included. Two panel discussions, on new projects at the Kuwait National Petroleum Company (KNPC) and needs for control systems were held. Participation in the workshop came from the oil industry and academic institutions.

Kotob, S.

1986-01-01T23:59:59.000Z

454

World tanker industry maintains momentum from Persian Gulf war  

SciTech Connect (OSTI)

The world tanker industry has managed to maintain the momentum generated during the Persian Gulf War. Freight rates for large vessels have regained the high levels seen during the first 2 months of this year, while the expected postwar decline in use of tankers has not materialized. The health of the tanker industry is linked closely with the volume of long haul crude oil from the Middle East, a spot charter from the gulf to Europe, an owner would only break even on the cost of building and operating a new tanker to the highest environmental standards. Owners currently can expect spot rates of about $40,000/day, excellent by the standards of the late 1980s and early 1990s but still below the level needed to justify new buildings. And there are many in the industry who think $40,000/day will be just a happy memory later in the year. Owners are facing pressure for major changes in the industry. Governments and the public want better operating standards and new environmentally sound tankers to reduce the risk of oil spills. At the same time, the industry has to learn to live with repercussion in the 1990 Oil Pollution Act in the U.S., which has opened the way for unlimited liability against tanker owners involved in spills off the U.S. The search also is on for improved profits to make investments required by the changing world of seaborne oil transportation.

Not Available

1991-06-10T23:59:59.000Z

455

Implementation and Rejection of Industrial Steam System Energy Efficiency Measures  

E-Print Network [OSTI]

Office: Industrial Assessment Centers. U.S. their Industrial Assessment Centers (IAC) and the

Therkelesen, Peter

2014-01-01T23:59:59.000Z

456

Integrated Laboratory Industry Research Project  

Broader source: Energy.gov (indexed) [DOE]

general approaches to synthesizing and evaluating established and emerging solid state lithium ion conductors. * Source commercial samples where available, develop methods...

457

Applied large eddy simulation  

Science Journals Connector (OSTI)

...2971-2983. doi:10.1098/rsta.2008.0303 . Audio Supplement Audio Supplement Audio files from the Applied large eddy simulation...fidelity. | Whittle Laboratory, Department of Engineering, University of Cambridge, Cambridge CB2 1PZ...

2009-01-01T23:59:59.000Z

458

EIA - 2010 International Energy Outlook - Industrial  

Gasoline and Diesel Fuel Update (EIA)

Industrial Industrial International Energy Outlook 2010 Industrial Sector Energy Consumption Worldwide industrial energy consumption increases by 42 percent, or an average of 1.3 percent per year, from 2007 to 2035 in the IEO2010 Reference case. Ninety-five percent of the growth occurs in non-OECD nations. Overview The world's industries make up a diverse sector that includes manufacturing, agriculture, mining, and construction. Industrial energy demand varies across regions and countries, depending on the level and mix of economic activity and technological development, among other factors. Energy is consumed in the industrial sector for a wide range of activities, such as processing and assembly, space conditioning, and lighting. Industrial energy use also includes natural gas and petroleum products used as feedstocks to produce non-energy products, such as plastics. In aggregate, the industrial sector uses more energy than any other end-use sector, consuming about one-half of the world's total delivered energy.

459

The Advanced Automation for Powder Diffraction toward Industrial Application  

SciTech Connect (OSTI)

A highly automated system for powder diffraction with synchrotron radiation was installed on the large Debye-Scherrer camera at the BL19B2 Engineering Science Research I beamline of SPring-8. Combined with a sample transfer and an automated centering system, we have succeeded in increasing the ratio of exposure time in the user beam time to 85%. The proposed system can be applied to a wide range of industrial uses.

Osaka, Keiichi; Matsumoto, Takuya; Miura, Keiko; Sato, Masugu; Hirosawa, Ichiro; Watanabe, Yoshio [Industrial Application Division, Japan Synchrotron Radiation Research Institute (JASRI/SPring8), 1-1-1, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan)

2010-06-23T23:59:59.000Z

460

The Advanced Automation for Powder Diffraction toward Industrial Application  

Science Journals Connector (OSTI)

A highly automated system for powder diffraction with synchrotron radiation was installed on the large Debye?Scherrer camera at the BL19B2 Engineering Science Research I beamline of SPring?8. Combined with a sample transfer and an automated centering system we have succeeded in increasing the ratio of exposure time in the user beam time to 85%. The proposed system can be applied to a wide range of industrial uses.

Keiichi Osaka; Takuya Matsumoto; Keiko Miura; Masugu Sato; Ichiro Hirosawa; Yoshio Watanabe

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Pharmaceutical Chemistry B.S. 1. General description and characteristics of the program.  

E-Print Network [OSTI]

.D. degrees in chemistry work in the pharmaceutical industry. Pharmaceutical companies need employees to work productively in the pharmaceutical industry, especially in the areas of research and developmentPharmaceutical Chemistry B.S. 1. General description and characteristics of the program

462

Applications of CBR in oil well drilling "A general overview"  

E-Print Network [OSTI]

Applications of CBR in oil well drilling "A general overview" Samad Valipour Shokouhi1,3 , Agnar successfully. Keywords: Case-based reasoning, oil well drilling 1 Introduction Case-based reasoning (CBR provide to the oil and gas drilling industry. The number of publications on the application of CBR

Aamodt, Agnar

463

general_atomics.cdr  

Office of Legacy Management (LM)

former General former General Atomics Hot Cell Facility was constructed in 1959 and operated until 1991. The site encompassed approximately 7,400 square feet of laboratory and remote operations cells. Licensed operations at the facility included receipt, handling, and shipment of radioactive materials; remote handling, examination, and storage of previously irradiated nuclear fuel materials; pilot-scale tritium extraction operations; and development, fabrication, and inspection of uranium oxide-beryllium oxide fuel materials. General Atomics performed most of the work for the federal government. The General Atomics Hot Cell Facility was located in a 60-acre complex 13 miles northwest of downtown San Diego, 1 mile inland from the Pacific Ocean, and approximately 300 feet above sea level.

464

MASSACHUSETTS GENERAL HOSPITAL  

E-Print Network [OSTI]

MASSACHUSETTS GENERAL HOSPITAL Page 1 of 4 HARVARD MEDICAL SCHOOL Position: Quality & Safety and efficacy of our practice, reporting this data out to department clinicians, senior leadership and hospital hospital and department groups, exceptional interpersonal, communication, project organization, time

Adams, Mark

465

1 General Information  

E-Print Network [OSTI]

1 General Information. 1.1 Class time / location: TTh 9-10:15, REC 114. 1.2 Office Hours: T 1:00-2:30 and Th 12:00-1:00. 1.3 Textbook: Elementary differential...

2014-08-26T23:59:59.000Z

466

General User Proposals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Proposals Print Tuesday, 01 June 2010 09:36 General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS...

467

Introduction: General Landslide Studies  

Science Journals Connector (OSTI)

Highlights for several papers included in the general landslide session for the 3rd World Landslide Forum are presented. Topics range from early warning systems and modelling to geomorphology and solid waste...

Peter Bobrowsky; Yueping Yin

2014-01-01T23:59:59.000Z

468

General relativity and experiment  

E-Print Network [OSTI]

The confrontation between Einstein's theory of gravitation and experiment is summarized. Although all current experimental data are compatible with general relativity, the importance of pursuing the quest for possible deviations from Einstein's theory is emphasized.

T. Damour

1994-12-08T23:59:59.000Z

469

2011 IAEA General Conference  

Broader source: Energy.gov (indexed) [DOE]

2011 IAEA General Conference 2011 IAEA General Conference Remarks as Prepared for Delivery Secretary Steven Chu Monday, September 19, 2011 Thank you, Ambassador Feruta. Congratulations on your election as President of this Conference. I also want to thank Director General Amano for his outstanding leadership. I am honored to represent the United States today, and I want to share a message from President Barack Obama: "On behalf of the United States, please accept my best wishes for a successful International Atomic Energy Agency General Conference. This year's meeting takes place against the backdrop of the severe earthquake and tsunami that struck Japan in March and the devastating accident at the Fukushima Daiichi Nuclear Power Station that followed. Along with

470

Symmetric generalized binomial distributions  

SciTech Connect (OSTI)

In two recent articles, we have examined a generalization of the binomial distribution associated with a sequence of positive numbers, involving asymmetric expressions of probabilities that break the symmetry win-loss. We present in this article another generalization (always associated with a sequence of positive numbers) that preserves the symmetry win-loss. This approach is also based on generating functions and presents constraints of non-negativeness, similar to those encountered in our previous articles.

Bergeron, H. [Univ Paris-Sud, ISMO, UMR 8214, 91405 Orsay (France)] [Univ Paris-Sud, ISMO, UMR 8214, 91405 Orsay (France); Curado, E. M. F. [Centro Brasileiro de Pesquisas Fisicas, Rua Xavier Sigaud 150 22290-180 - Rio de Janeiro (Brazil) [Centro Brasileiro de Pesquisas Fisicas, Rua Xavier Sigaud 150 22290-180 - Rio de Janeiro (Brazil); Instituto Nacional de Cincia e Tecnologia - Sistemas Complexos, Rua Xavier Sigaud 150, 22290-180 - Rio de Janeiro, RJ (Brazil); Gazeau, J. P. [Centro Brasileiro de Pesquisas Fisicas, Rua Xavier Sigaud 150 22290-180 - Rio de Janeiro (Brazil) [Centro Brasileiro de Pesquisas Fisicas, Rua Xavier Sigaud 150 22290-180 - Rio de Janeiro (Brazil); APC, UMR 7164, Univ Paris Diderot, Sorbonne Paris Cit, 75205 Paris (France); Rodrigues, Ligia M. C. S., E-mail: herve.bergeron@u-psud.fr, E-mail: evaldo@cbpf.br, E-mail: gazeau@apc.univ-paris7.fr, E-mail: ligia@cbpf.br [Centro Brasileiro de Pesquisas Fisicas, Rua Xavier Sigaud 150 22290-180 - Rio de Janeiro (Brazil)

2013-12-15T23:59:59.000Z

471

Industry  

E-Print Network [OSTI]

Emission reduction at Engen refinery in South Durban. Paperenergy consumed in refineries and other energy conversionCement Membrane separation Refinery gas Natural gas Bio-

Bernstein, Lenny

2008-01-01T23:59:59.000Z

472

Industry  

E-Print Network [OSTI]

July, 2005. Price, L. , J. Sinton, E. Worrell, D. Phylipsen,L. , S. de la Rue du Can, J. Sinton, E. Worrell, N. Zhou, J.April, 2002), pp. 105-109. Sinton, J.E. and D.G. Fridley,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

473

Industry  

E-Print Network [OSTI]

of environmentally sound technology, SMEs may not have theSMEs. Energy efficiency and other GHG mitiga- tion technologies

Bernstein, Lenny

2008-01-01T23:59:59.000Z

474

Industry  

E-Print Network [OSTI]

A.T, 2001: Prospects for biogas harvesting at Sungunn WongseRenewables Biomass, Biogas, PV, Wind turbines, Hydropowermill, fluidized bed kiln Biogas, Biomass Cullet preheating

Bernstein, Lenny

2008-01-01T23:59:59.000Z

475

Industry  

E-Print Network [OSTI]

for example more efficient electric motors and motor-drivenuse of more efficient electric motors and motor systems, arehigh efficiency electric motors and insulation, etc. ) show

Bernstein, Lenny

2008-01-01T23:59:59.000Z

476

INDUSTRY  

Science Journals Connector (OSTI)

The expansion also increases the amount of power purchased from the Bonneville Administration from 66,000 to 100,000 kilowatts. ...

1952-10-06T23:59:59.000Z

477

INDUSTRY  

Science Journals Connector (OSTI)

Bonneville Power Administration will supply additional power requirements on an interruptible basis. ...

1952-03-24T23:59:59.000Z

478

Industrial  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Showerheads Residential Weatherization Performance Tested Comfort Systems Ductless Heat Pumps New Construction Residential Marketing Toolkit Retail Sales Allocation Tool...

479

Industry  

E-Print Network [OSTI]

ghg/GreenhouseGasRegister/production (Mt) a A1 B2 GHG intensity (tCO 2 -eq/t prod. )Agency, Paris, 596 pp. IEA GHG, 2000: Greenhouse gases from

Bernstein, Lenny

2008-01-01T23:59:59.000Z

480

Industry  

E-Print Network [OSTI]

sized, high efficiency electric motors and insulation,by improving the efficiency of the electric motor throughelectric motors and motor-driven systems; high efficiency

Bernstein, Lenny

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial large general" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Industry  

E-Print Network [OSTI]

of world production and typically uses 6070% less energy (world steel production, finding potential CO 2 emission reductions due to energy

Bernstein, Lenny

2008-01-01T23:59:59.000Z

482

Industry  

E-Print Network [OSTI]

communication to the UN Framework Convention on Climate Change.Communications - Report by the Secretariat. UN Framework Convention on Climate Change.

Bernstein, Lenny

2008-01-01T23:59:59.000Z

483

Industry  

E-Print Network [OSTI]

sectors share of global primary energy use declined fromused 91 EJ of primary energy, 40% of the global total of 227Global and sectoral data on final energy use, primary energy

Bernstein, Lenny

2008-01-01T23:59:59.000Z

484

Industry  

E-Print Network [OSTI]

combined heat and power and coke ovens, and waste managementto ban the use of small-scale coke-producing facilities forcasting, Scrap preheating, Dry coke quenching Inert anodes,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

485

Industry  

E-Print Network [OSTI]

land, Canada, Norway and Nigeria that monetized non-energyNetherlands, Norway and the USA. As part of its energy and

Bernstein, Lenny

2008-01-01T23:59:59.000Z

486

Industry  

E-Print Network [OSTI]

2003: The history of waste energy recovery in Germany sinceincreasing recovery of waste energy and process gases, andgeneration or non-energy uses, waste-derived fuels,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

487

Industry  

E-Print Network [OSTI]

Schleich, J. , 2004: Do energy audits help reduce barriersof organizational barriers. Energy audit and managementa; US EPA, n.d. ). Energy Audits and Management Systems.

Bernstein, Lenny

2008-01-01T23:59:59.000Z

488

Industrial  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are stressed by an aging infrastructure and increased demand for power. Electricity distribution companies are under pressure to improve reliability and system performance,...

489

What is the Industrial Technologies Program  

Broader source: Energy.gov (indexed) [DOE]

Together with our industry partners, we strive to: Together with our industry partners, we strive to: * Accelerate adoption of the many energy-efficient technologies and practices available today * Conduct vigorous technology innovation to radically improve future energy diversity, resource efficiency, and carbon mitigation * Promote a corporate culture of energy efficiency and carbon management What Is the Industrial Technologies Program ? The Industrial Technologies Program (ITP) is the lead federal agency responsible for improving energy efficiency in the largest energy-using sector of the country. Industrial Sector National Initiative Goal: Drive a 25% reduction in industrial energy intensity by 2017. Standards Training Information Assessments * Website * Information Center * Tip Sheets * Case studies * Webcasts * Emerging

490

Improving large-sized PLC programs verification using abstractions  

E-Print Network [OSTI]

Improving large-sized PLC programs verification using abstractions V. Gourcuff O. de Smet J [2005]) models of PLC programs, which can be verified with well- known model-checkers, like UPPAAL the development of industrial PLC programs up to now (John- son [2007]). Several reasons can explain

Paris-Sud XI, Université de

491

A large carbon sink in the woody biomass of Northern forests  

E-Print Network [OSTI]

A large carbon sink in the woody biomass of Northern forests R. B. Myneni* , J. Dong* , C. J fossil fuels and industrial activities. Some of the missing carbon is sequestered in vegetation biomass, industrialized nations can use certain forest biomass sinks to meet their green- house gas emissions reduction

Goldberg, Bennett

492

UAIEE and Industrial Assessment Centers  

Broader source: Energy.gov (indexed) [DOE]

UAIEE and IACs UAIEE and IACs Michael B Muller IAC Field Manager Rutgers University 5月5-6日,2011|劳伦斯伯克利国家实验室,伯克利市,加州 Industrial Assessment Centers * Started in 1976 * Currently 26 Centers across the US * Almost 15,000 Assessments * Assessments in all 50 States * Over 111,000 Recommendations * Continues to Grow yearly by: * 400 assessments * 3,000 recommendations 5月5-6日,2011|劳伦斯伯克利国家实验室,伯克利市,加州 IAC Assessments of Small and Medium Manufacturers 5月5-6日,2011|劳伦斯伯克利国家实验室,伯克利市,加州 Industrial Assessment Centers * ABET Accredited Engineering Universities * Director must be a teaching faculty member

493

Horizontal interest in industrial purchasing  

Science Journals Connector (OSTI)

Markets are becoming very complex and dynamic and in such an environment, firms can no longer merely focus their attention on key relationships in their downstream and upstream markets, but instead need to constantly monitor and make sense of the market around them. One area within these markets, that has been rather neglected within the current purchasing research are the other buyers in the market. The purpose of the present study is to examine the forms of horizontal interest in purchasing. The paper aims to answer the question: What are the forms of horizontal interest and how can these be incorporated into the functions of industrial purchasing? The paper applies theoretical knowledge and reports on an empirical case study conducted to address the question. As a result, a two-dimensional typology of the forms of horizontal interest and implications for industrial purchasing are presented.

Pauliina Ulkuniemi

2012-01-01T23:59:59.000Z

494

Ceramics for ATS industrial turbines  

SciTech Connect (OSTI)

US DOE and most US manufacturers of stationary gas turbines are participating in a major national effort to develop advanced turbine systems (ATS). The ATS program will achieve ultrahigh efficiencies, environmental superiority, and cost competitiveness compared with current combustion turbine systems. A major factor in the improved efficiencies of simple cycle ATS gas turbines will be higher operating efficiencies than curren engines. These temperatures strain the limits of metallic alloy and flow-path cooling technologies. Ceramics materials offer a potential alterative to cooled turbine alloys for ATS turbines due to higher melting points than metallics. This paper evaluates ceramics technology and plant economic issues for ATS industrial turbine systems. A program with the objective of demonstrating first-stage ceramic vanes in a commerical industrial turbine is also described.

Wenglarz, R.; Ali, S. [Allison Engine Co., Indianapolis, IN (United States); Layne, A. [USDOE Morgantown Energy Technology Center, WV (United States)

1996-05-01T23:59:59.000Z

495

Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April, 2006 (draft) 1 MEASURING INDUSTRIAL ENERGY SAVINGS  

E-Print Network [OSTI]

MEASURING INDUSTRIAL ENERGY SAVINGS Kelly Kissock and Carl Eger Department of Mechanical and Aerospace a general method for measuring industrial energy savings and demonstrates the method using a case study from- and post retrofit periods. In these cases, it is more difficult to measure energy savings and

Kissock, Kelly

496

Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry  

E-Print Network [OSTI]

Reinventing the Industrial Heartland: Supply Chain Sustainability and the New Automotive Industry-Director, WI Electric Machines and Power Electronics Consortium, University of Wisconsin-Madison Challenge: Lee

Wisconsin at Madison, University of

497

Resource-based industrialization in Peninsular Malaysia. A case study of the rubber products manufacturing industry.  

E-Print Network [OSTI]

??This economic history and examination of the rubber products manufacturing industry in Peninsular Malaysia contributes to the subject of resource-based industrialization in the field of (more)

Goldthorpe, Christopher C.

2009-01-01T23:59:59.000Z

498

Improve Chilled Water System Performance, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet describes how the Industrial Technologies Program Chilled Water System Analysis Tool (CWSAT) can help optimize the performance of of industrial chilled water systems.

Not Available

2008-12-01T23:59:59.000Z

499

Boost Process Heating Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet describes how the Industrial Technologies Program Process Heating Assessment and Survey Tool (PHAST) can help industrial plants indentify opportunities to save energy.

Not Available

2008-12-01T23:59:59.000Z

500

Energy efficiency programs and policies in the industrial sector in industrialized countries  

E-Print Network [OSTI]

energy efficiency. Among industries included are cement, pulp and paper and plasticenergy efficiency in industry. Achievements: Production standards have been set for the engineering, plastics,

Galitsky, Christina; Price, Lynn; Worrell, Ernst

2004-01-01T23:59:59.000Z