Powered by Deep Web Technologies
Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

M.M. Ansari

2005-04-05T23:59:59.000Z

2

Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes 1 "Overall AC electrical energy consumption (AC Whmi)" is based on AC electricity consumed during charging events which began during the reporting period and distance driven...

3

Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes Notes Track Reconstruction with Cosmic Ray Data at the Tracker Integration Facility (pdf format) CMS Tracker Alignment at the Integration Facility (pdf format) Silicon Strip Tracker Detector Performance with Cosmic Ray Data at the Tracker Integration Facility (pdf format) Tracker Operation and Performance at the Magnet Test and Cosmic Challenge (pdf format) CMS Silicon Tracker Module Assembly and Testing at FNAL (pdf format) Silicon Tracker Module Assembly at UCSB (pdf format) CT and test beam results of irradiated magnetic Czochralski silicon (MCz-Si) detectors Nuclear Inst. and Methods in Physics Research, A 604 (2009), pp 254-25 Silicon Beam Telescope for LHC Upgrade Tests Nuclear Inst. and Methods in Physics Research, A 593 (2008), pp. 523-529 SiTracker Home Page

4

Industry  

E-Print Network (OSTI)

Note: Biomass energy included Source: Price et al. , 2006.Note: Biomass energy included Source: Price et al. (2006).

Bernstein, Lenny

2008-01-01T23:59:59.000Z

5

Explanatory Notes  

U.S. Energy Information Administration (EIA) Indexed Site

Explanatory Notes Explanatory Notes Survey Methodology Description of Survey Form The Form EIA-820, "Annual Refinery Report," is the primary source of data in the "Refinery Capacity Report" tables. The form collects data on the consumption of purchased steam, electricity, coal, and natural gas; refinery receipts of crude oil by method of transportation; operable capacity for atmospheric crude oil distillation units and downstream units; and production capacity for crude oil and petroleum products. Frame The respondent frame consists of all operating and idle petroleum refineries (including new refineries under construction), located in the 50 States, the District of

6

Travel Notes - World Market Update  

Science Conference Proceedings (OSTI)

Travel notes, air travel, rail travel. Travel Notes - World Market Update Biofuels and Bioproducts and Biodiesel Processing Elearning Olive oil Industry Events Industrial Oil Products Abstracts Program Travel Hotel Short Courses Exhibits Regi

7

Industry  

E-Print Network (OSTI)

from refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processes

Bernstein, Lenny

2008-01-01T23:59:59.000Z

8

Industry  

E-Print Network (OSTI)

oxide emission reductions in industry in the EU. Europeanissues: Annual survey of industries. Central StatisticalDesiccated coconut industry of Sri- Lanka’s opportunities

Bernstein, Lenny

2008-01-01T23:59:59.000Z

9

Industry  

E-Print Network (OSTI)

the paper, glass or ceramics industry) making it difficulttechnology in the ceramic manufacturing industry. industries: iron and steel, non-ferrous metals, chemicals (including fertilisers), petroleum refining, minerals (cement, lime, glass and ceramics) and

Bernstein, Lenny

2008-01-01T23:59:59.000Z

10

Industry  

E-Print Network (OSTI)

in the iron and steel industry: a global model. Energy, 30,report of the world steel industry 2005. International Irontrends in the iron and steel industry. Energy Policy, 30,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

11

Industry  

E-Print Network (OSTI)

of 81 Chapter 7 Final Draft 2030 production (Mt) a A1 B2 GHGpotential and cost in 2030 Notes and sources: a Price etelectrode technology by 2030. g Humphreys and Mahasenan,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

12

Industry  

E-Print Network (OSTI)

and power in US industry. Energy Policy, 29, pp. 1243-1254.Paris. IEA, 2004: Energy Policies of IEA Countries: Finlandand steel industry. Energy Policy, 30, pp. 827-838. Kim, Y.

Bernstein, Lenny

2008-01-01T23:59:59.000Z

13

Illinois mineral industry in 1984 and review of preliminary mineral production data for 1985. Illinois mineral notes  

SciTech Connect

The annual output and value of Illinois minerals extracted, processed, and manufactured into products in 1984 are summarized in the report. Materials used in manufacturing were not necessarily extracted within the state. Coal continued to be the leading commodity in terms of value; oil ranked second; stone and sand and gravel ranked third and fourth; fluorspar was fifth. Nationally, Illinois ranked eighteenth in value of nonfuel mineral production. It remained the principal U.S. producer of fluorspar, tripoli, and industrial sand and led in the manufacture of iron-oxide pigments. In stone and peat production, the state ranked fourth. Preliminary data for 1985 indicate that the value of minerals mined was $2,947.8 million, a decrease of 6.1 percent from the $3,138.0 million in 1984. Detailed production summaries and analyses--including maps, tables, and graphs--for all mineral commodities are based on data available for 1984.

Samson, I.E.; Bhagwat, S.B.

1986-01-01T23:59:59.000Z

14

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and...

15

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

An Exploration of Innovation and An Exploration of Innovation and Energy Efficiency in an Appliance Industry Prepared by Margaret Taylor, K. Sydny Fujita, Larry Dale, and James McMahon For the European Council for an Energy Efficient Economy March 29, 2012 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY LBNL - 5689E An Exploration of Innovation and Energy Efficiency in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and direction of technological change of product industries; the factors that underlie the outcomes of innovation in these industries; and the ways the innovation system might respond to any given intervention. The report provides an overview of the dynamics of energy efficiency policy and innovation in the appliance

16

Industry  

E-Print Network (OSTI)

milling industry: An ENERGY STAR Guide for Energy and Plantcement mak- ing - An ENERGY STAR Guide for Energy and Plantre- fineries - An ENERGY STAR Guide for Energy and Plant

Bernstein, Lenny

2008-01-01T23:59:59.000Z

17

Industry  

Science Conference Proceedings (OSTI)

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01T23:59:59.000Z

18

Industrial  

Gasoline and Diesel Fuel Update (EIA)

Industrial Industrial 8,870,422 44.3% Commercial 3,158,244 15.8% Electric Utilities 2,732,496 13.7% Residential 5,241,414 26.2% Source: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." T e x a s L o u i s i a n a C a l i f o r n i a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Industrial Billion Cubic Meters T e x a s C a l i f o r n i a F l o r i d a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Electric Utilities Billion Cubic Meters N e w Y o r k C a l i f o r n i a I l l i n o i s A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Commercial Billion Cubic Meters I l l i n o i s C a l i f o r n i a N e w Y o r k A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Residential Billion Cubic Meters 11. Natural Gas Delivered to Consumers in the United States, 1996 Figure Volumes in Million Cubic Feet Energy Information Administration

19

Emerging energy-efficient industrial technologies  

E-Print Network (OSTI)

Market Information: Industries End-use(s) Energy typesNotes Market Information: Industries End-use(s) Energy typesNotes Market Information: Industries End-use(s) Energy types

2000-01-01T23:59:59.000Z

20

Report Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes Notes 1 "Overall AC electrical energy consumption (AC Wh/mi)" is based on AC electricity consumed during charging events which began during the reporting period and distance driven during all trips in the reporting period. 2 "Overall DC electrical energy consumption (DC Wh/mi)" is based on net DC electricity discharged from or charged to the plug-in battery pack and distance driven during all trips in the reporting period. DC Wh/mi may not be comparable to AC Wh/mi if AC electricity charged prior to the reporting period was discharged during driving within the reporting period, or if AC electricity charged during the reporting period was not discharged during driving within the reporting period. 3 Trips when the plug-in battery pack charge was depleted to propel the vehicle throughout

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Description Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference Industry Meetings Draft- Solicitation Synopsis...

22

Testbed Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Testbed Description R&D Overview 100G Testbed Testbed Description Testbed Results Current Testbed Research Proposal Process Terms and Conditions Virtual Circuits (OSCARS)...

23

OTS NOTE  

Office of Legacy Management (LM)

@ 'Alexander Williams @ 'Alexander Williams FROM: Ed Mitchellqm SUBJECT: W.R. Grace Elimination Recommendation The purpose of this note is to provide you with certain information regarding the recommendation to eliminate W.R. Grace Company (the former Heavy Minerals Company), Chicago,Illinois, from consideration as a site under FUSRAP. Enclosed is a memo dated July 9, 1990: FUSRAP Considered Site Recommendation, for W.R. Grace Company. It recommends elimination in accordance with FUSRAP protocol. Also enclosed is some typed input material (dated July 9, 1990) about the site that you may want to use in the preparation of your Record of Elimination. If you concur, please provide a Record of Elimination to indicate DOE's decision to eliminate this site. In lieu of a separate memo, you may want

24

OTS NOTE  

Office of Legacy Management (LM)

* pp4 r G- .2- * pp4 r G- .2- OTS NOTE DATE: April 24, 1991 TO: Alexander Williams FROM: Dan Stou tF L SUBJECT: American Potash and Chemical Company Elimination Recommendation The attached memorandum and supporting documents are the basis for our recommendation to eliminate the former American Potash and Chemical Company site from further consideration under FUSRAP. The site is located in West Hanover, Massachusetts. Documents discovered to date indicating use or handling of radioactive material by American Potash consist of a National Lead Company of Ohio (NLO) internal memorandum which discusses tests American Potash performed for Union Carbide Nuclear Corporation (Oak Ridge), an Atomic Energy Commission (AEC) prime contractor. The site predecessor, National Fireworks Ordnance

25

OTS NOTE  

Office of Legacy Management (LM)

March 22, 1991 March 22, 1991 TO: A. Williams FROM: 0. Sto> Attached is a revised site summary for the Exxon Company in Linden, New Jersey. The summary incorporates new information from a file search and from a conversation with.an NRC inspector. The specific locations of AEC/MED operations have not been identified. .I." -:;1 5':' :?iv,::.;& & had been decontami "ated. The NRC inspector did note that the kC.Mackenzie E. Mitchell C. Young .c. FUSRAP NJ.18 Exxon Research and Engineering Company The Former Standard Oil Development Company Linden, New Jersey Site Function In the spring of 1942, Standard Oil Development Company (SODC) was contracted to be in charge of obtaining materials for work being do the Metallurgical Laboratories and subsequently the MED. SODC play

26

Chapter 5. Technical Notes  

Science Conference Proceedings (OSTI)

... OOF: Finite Element Analysis of Microstructures. Table of Contents, Chapter 5. Technical Notes, OOF home. ... Chapter 5. Technical Notes. ...

2013-08-23T23:59:59.000Z

27

Linear Collider Collaboration Tech Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 May 2001 Lattice Description for NLC Damping Rings at 120 Hz Andrzej Wolski Lawrence Berkeley National Laboratory Abstract: We present a lattice design for the NLC Main Damping Rings at 120 Hz repe tition rate. A total wiggler length of a little over 46 m is needed to achieve the damping time required for extracted, normalized, vertical emittance below 0.02 mm mrad. The dynamic aperture (using a linear model for the wiggler) is in excess of 15 times the injected beam size. The principal lattice parameters and characteristics are presented in this note; we also outline results of studies of alignment and field quality tolerances. CBP Tech Note-227 LCC-0061 Lattice Description for NLC Main Damping Rings at 120 Hz Andrzej Wolski Lawrence Berkeley National Laboratory

28

Stone Description  

Science Conference Proceedings (OSTI)

United States, Minnesota, Sandstone, Jordan, 9RA33, 26687, y, Front Face (South), Dscf0282.jpg. No 9RA33 is: Description. buff. rust-spotted. fine grain ...

29

Stone Description  

Science Conference Proceedings (OSTI)

United States, New York, Limestone, Sandy Hill, 8RA6, 26828, y, Front Face (South), Dscf0268_6.jpg. No 8RA6 is: Description. dark gray. fine grain. ...

30

Quickies : intelligent sticky notes  

E-Print Network (OSTI)

This thesis introduces 'Quickies', an attempt to bring one of the most useful inventions of the 20th century into the digital age: the ubiquitous sticky notes. Sticky notes help us manage our to-do lists, tag our objects ...

Mistry, Pranav (Pranav K.)

2008-01-01T23:59:59.000Z

31

just staff note  

NLE Websites -- All DOE Office Websites (Extended Search)

Staff private notes Staff private notes August 27, 2013 (0 Comments) The availability on Edison started as of 20:00 PDT 8232013. Post your comment You cannot post comments until...

32

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description Discover E (Engineering) is an evening of interesting, interactive and fun engineering, science, math, and technology demonstrations for K-12 students and their parents or guardians. It is held in conjunction with National Engineers Week which is celebrated at the time of George Washington's birthday, our nation's first President, who was a military engineer and land surveyor. Activities include 30-50 interactive demonstrations of basic engineering, science, technology and math principles that may include robots, reverse engineering, casting, crystal structures, forensic science, the effects of liquid nitrogen, slide rule, sound waves, electrostatics, mechanics, materials properties and materials

33

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National Laboratory. * teaches modern geophysical exploration techniques: seismic reflection and refraction, gravity and magnetics, electromagnetics (including magnetotellurics), and electrical resistivity * involves extensive hands-on field experience * integrates geophysical methods to solve real

34

NIST Technical Note XXXX  

Science Conference Proceedings (OSTI)

Page 1. NIST Technical Note 1621 Optical Radiation Measurements Based on Detector Standards George P. Eppeldauer, Editor Page 2. ...

2010-10-08T23:59:59.000Z

35

NBS TECHNICAL NOTE 674  

Science Conference Proceedings (OSTI)

Page 1. NBS TECHNICAL NOTE 674 Page 2. NATIONAL BUREAU OF STANDARDS The National Bureau of Standards ...

2002-08-19T23:59:59.000Z

36

Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Description Project Description The Energy Policy Act of 2005 (EPAct 2005), the Energy Independence and Security Act of 2007 (EISA 2007), and Presidential Executive Order 13423 all contain requirements for Federal facilities to decrease energy consumption and increase the use of renewable energy by the year 2015. To provide leadership in meeting these requirements, DOE, in partnership with the General Services Administration (GSA), has installed a rooftop solar electric, or PV, system on the roof of DOE's headquarters in Washington, D.C. The 205 kilowatt (kW) installation is one of the largest of its kind in the Nation's capital. A display in the For- restal building will show the power output of the PV system during the day and the energy produced over

37

Favorable conditions noted for Australia shale oil  

Science Conference Proceedings (OSTI)

After brief descriptions of the Rundle, Condor, and Stuart/Kerosene Creek oil shale projects in Queensland, the competitive advantages of oil shale development and the state and federal governments' attitudes towards an oil shale industry in Australia are discussed. It is concluded that Australia is the ideal country in which to start an oil shale industry.

Not Available

1986-09-01T23:59:59.000Z

38

Industry Energy Efficiency Workshop - U.S. Energy Information ...  

U.S. Energy Information Administration (EIA)

Notes on the Energy Information Administration's summary session on Industry Sector Energy-Efficiency Workshop on March 5, 1996

39

TECHNICAL NOTE A  

NLE Websites -- All DOE Office Websites (Extended Search)

TECHNICAL NOTE A novel FRET approach for in situ investigation of cellulase-cellulose interaction Liqun Wang & Yiqing Wang & Arthur J. Ragauskas Received: 15 May 2010 Revised: 9...

40

Problem Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Description Description Model Domain 2-D Radial Grid System : 1000 m x 60 m 25 m 25 m 10 m Hydrate Zone 1000 m Shale Shale Discretization Model 1 (200 x 30) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 30 cells (5 x 5 m, 20 x 0.5 m, 5 x 5 m) Model 2 (200 x 11) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 11 cells (5 x 5 m, 1 x 10.0 m, 5 x 5 m) Model 3 (50 x 30) r direction : 50 cells logarithmically distributed from r w = 0.10795 m to r 50 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls")

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Project Name/Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RCA CM-3 Risk Management RCA CM-3 Risk Management Projects/Programs - RMPs, Tools, and SMEs Project Name/Description (see note below) DOE Program DOE RMP Contractor RMP Combined RMP Tools Database/Risk Analysis SMEs Federal/M&O/Consultant Integrated Biorefinery Research Facility Project EE X Research Support Facility Project EE X National Synchrotron Light Source II Project SC X 12 GeV Upgrade Project (TJL) SC X Physical Sciences Facility Project (PNNL) SC X P6, Pertmaster, Excel Mike Shay, Jason Gatelum ITER SC X (internation al pgm) P6, Pertmaster, Risk Checklist, Risk Assessor Handbook John Tapia, Colin Williams, Allen Bishop SING & SING II (SNS, OR) SC X Excel, Analytic Hierarchy, P6 Barbara Thibadeau Modernization of Lab Fac. (ORNL)

42

Manhattan Project: Potsdam Note  

Office of Scientific and Technical Information (OSTI)

POTSDAM NOTE POTSDAM NOTE Potsdam, Germany (July 1945) Resources > Photo Gallery Note written by President Harry S. Truman, in which he brags that Stalin did not understand when Truman hinted at Potsdam of a powerful new American weapon. (Scroll down to see the note.) Due to the success of Soviet espionage, however, Truman was incorrect-in fact, Stalin knew about the atomic bomb project three years before Truman did. Truman wrote this note on the back of a photograph of the Potsdam Conference taken on July 19, 1945. In the photograph Stalin talks with Truman and Secretary of State James Byrnes (both have their backs to the camera). The photograph of Potsdam is courtesy the Office of the Chief Signal Officer, War Department, U.S. Army; this image, and the photograph of Truman's writing on the back of it, are courtesy the National Archives.

43

Meeting Notes and Presentations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Board Notes and Slides Board Notes and Slides Notes from EM Corporate QA Board Tele-Conference - February 22, 2010 1 of 2 General: Attendance of voting board members was documented. All members were present or had a representative present on the call. Previous 5 Focus Areas: Dave Tuttel presented the proposed closeout of the previous 5 focus areas for the EM Corporate Board. * Focus Area 1 (Requirements Flow Down) - Board voted to close the focus area (unanimous) * Focus Area 2 (Adequate NQA-1 Suppliers) - Board voted to close the focus area (unanimous) * Focus Area 3 (CGI and Services Dedication) - Board voted to close the focus area (unanimous) * Focus Area 4 (Graded Approach to QA) -Discussion noted that the area as a whole may need more work in the future focus areas even though the procurement piece is ready to close out. The discussion also noted

44

Approved Test Procedures Version 1.1 Release Notes  

E-Print Network (OSTI)

Approved Test Procedures Version 1.1 Release Notes 1 Change Reason for Change 302.a drugdrug, drug allergy In the Informative Test Description section Added clarification to the example. 302.c Problem List In the Informative Test Description section Added the sentence "The test also

45

EWS NOTES N  

NLE Websites -- All DOE Office Websites (Extended Search)

EWS NOTES EWS NOTES N f √ ν Fermilab Friends for Science Education Fermilab Friends for Science Education exists to support innovative science education programs. Fall, 2009 Lynda Ballingall, Mike McGee and Mary Jo Murphy at the Fermilab booth Can they accelerate the ball? Michael Cooke and David Schmitz with liquid helium A cryogenic cannon - how cool is that?! Fermilab was a year-long participant in Science Chicago's LabFest, a series of events throughout the

46

Research Project Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Project Description No job description found Current Research Opportunities Regulatory Science Course Development Fellowship Health and Medical Emergency Management...

47

muon Collider Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Muon Collider Notes Muon Collider Notes MC-001 D. Neuffer, "Colliding Muon Beams at 90 GeV" Fermilab Note FN-319, July 1979. MC-002 D. Neuffer, "Principles and Applications of Muon Cooling" Proc. of the 12th International Conf. on High-Energy Accelerators, p. 481, 1983. MC-003 V.V. Parkhomchuk and A.N. Skrinsky, "Ionization Cooling: Physics and Applications" Proc. of the 12th International Conf. on High-Energy Accelerators, p. 485, 1983. MC-004 E.A. Perevedentsev and A.N. Skrinsky, "On the Proton Klystron" Proc. of the 12th International Conf. on High-Energy Accelerators, p. 508, 1983. MC-005 D. Neuffer, "Principles and Applications of Muon Cooling" Particle Accelerators, Vol. 14, p. 75, 1983. MC-006 D. Neuffer, "Multi-TeV Muon Colliders" Proc. of the Advanced

48

Poultry Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. poultry industry and ways in which electric-powered processes and technologies can be used in poultry and egg production and processing. The poultry industry, which consists of poultry production for meat as well as egg production and processing, is one of the fastest growing segments of the U.S. food manufacturing industry. It is also an energy-intensive industry. In fact, a 2010 report by the USDA illustrates ...

2011-03-30T23:59:59.000Z

49

Property:Incentive/QuantNotes | Open Energy Information  

Open Energy Info (EERE)

QuantNotes QuantNotes Jump to: navigation, search Property Name Incentive/QuantNotes Property Type Text Description DSIRE Quantitative notes. Pages using the property "Incentive/QuantNotes" Showing 25 pages using this property. (previous 25) (next 25) 3 30% Business Tax Credit for Solar (Vermont) + For property placed in service on or before 09/01/2011. Cannot be taken if other CEDF grant is taken. A AEP Ohio - Renewable Energy Credit (REC) Purchase Program (Ohio) + All RECs were required to be transfered into AEP Ohio's GATS account by July 15, 2013 in order to be eligible for the program. No information is available regarding future solicitations. AEP Ohio - Renewable Energy Technology Program (Ohio) + Wind incentive is an upfront incentive based on expected annual output in kWh (not a PBI). Entered below as a PBI.

50

Promoting Energy Efficiency in Cement Making: The ENERGY STAR(R) for Industry Program  

E-Print Network (OSTI)

industry. For information Energy Guide for Cement Making,eworrellt@lbl.gov. End Notes Energy Efficiency Improvementthe Cement Industry: An ENERGY STAR® Guide for Energy and

Masanet, Eric; Worrell, Ernst

2007-01-01T23:59:59.000Z

51

note1.dvi  

NLE Websites -- All DOE Office Websites (Extended Search)

Low-Emittance Low-Emittance APS Lattice with Alternating Horizontal Beta Functions at Insertion Devices - formerly OAG-TN-2004-057 - Michael Borland-12/8/2004 - Accelerator Systems Division, Advanced Photon Source 1 Introduction Previously [1, 2] we looked at the possibility of reducing the horizontal beta function in a straight section in order to optimize the beam properties for certain uses. This is difficult to do as an insertion because of the many constraints on the APS lattice. In particular, the emittance inevitably increases, and it can only be done for one or two sectors. We noted in [1] that an ESRF-style lattice with alternating high- and low-β x sectors might provide reasonably good emittance for the APS, while providing two types of beta function. In this note, we present such a lattice that not only provides alternating β x , but also improved emittance. 2 Linear Optics For the

52

Notes and Definitions  

Weekly Natural Gas Storage Report (EIA)

Notes and Definitions Notes and Definitions This report tracks U.S. natural gas inventories held in underground storage facilities. The weekly stocks generally are the volumes of working gas as of the report date. Changes in reported stock levels reflect all events affecting working gas in storage, including injections, withdrawals, and reclassifications between base and working gas. Totals may not match sum of components because of independent rounding. The complete documentation of EIA's estimation methodology is available in the report, Methodology for EIA Weekly Underground Natural Gas Storage Estimates. Information about the method used to prepare weekly data to compute the 5-year averages, maxima, minima, and year-ago values for the weekly report can be found in Computing the 5-year Averages, Maxima, Minima, and Year-Ago

53

Property:CompletionNotes | Open Energy Information  

Open Energy Info (EERE)

CompletionNotes CompletionNotes Jump to: navigation, search Property Name CompletionNotes Property Type Text Description List of data that still needs to be researched and entered for the NEPA document Subproperties This property has the following 2 subproperties: C CA-96062042 D DOI-BLM-CA-ES-2013-002+1793-EIS Pages using the property "CompletionNotes" Showing 25 pages using this property. (previous 25) (next 25) B BLM-NV-WN-ES-08-01-1310, NV-020-08-01 + 8/2: Data reviewed for completion C CA-017-05-051 + 8/9 Data entry complete. Attached FONSI does not seem to be fully related to the attached EA. The FONSI is for a geothermal well and slimhole exploration project and the EA is for a pipeline project. Need to add Public Health and Safety as a resource 8/22/13 - The 'FONSI/DR is actually for EA CA-170-02-15 Bassalt Canyon..dated Jan 2002 KW 8/26/13 - I deleted the FONSI from this page. Filename is incorrect for the file and stands as "CA-017-05-51-EA-DR -FONSI.pdf," Andrew Gentile. Unable to find Final EA or FONSI online. When RMP added, add "Inyo National Forest "Land and Resource Management Plan" (LRMP) 1988"

54

Turbine Oil Lube Notes Compilation  

Science Conference Proceedings (OSTI)

This report is a special compilation of the EPRI Nuclear Maintenance Applications Center's (NMAC's) "Lube Notes" articles (extracted from "Lube Notes Compilation, 1989-2001 (Report Number 1006848)) that relate specifically to the topic of turbine oils.

2002-11-25T23:59:59.000Z

55

Windows Installation Notes for EXPGUI  

Science Conference Proceedings (OSTI)

... These notes describe how GSAS & EXPGUI are installed using separate distribution files for GSAS, EXPGUI and Tcl/Tk. ...

56

,"South Dakota Natural Gas Industrial Consumption (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

,"Workbook Contents" ,"South Dakota Natural Gas Industrial Consumption (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of...

57

Industrial | OpenEI  

Open Energy Info (EERE)

Industrial Industrial Dataset Summary Description The Industrial Assessment Centers (IAC) Database is a collection of all the publicly available data from energy efficiency assessments conducted by IACs at small and medium-sized industrial facilities. Source Department of Energy Industrial Assessment Centers Date Released September 20th, 2012 (2 years ago) Date Updated September 20th, 2012 (2 years ago) Keywords assessment energy efficiency Industrial manufacturing small and medium-sized Data application/vnd.ms-excel icon copy_of_iac_database.xls (xls, 28.7 MiB) Quality Metrics Level of Review Standards Comment Temporal and Spatial Coverage Frequency Daily Time Period License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset

58

Manhattan Project: Sources and Notes  

Office of Scientific and Technical Information (OSTI)

SOURCES AND NOTES SOURCES AND NOTES Resources > Sources Below are the collected specific notes for the text and images used on the pages of this web site. For a discussion of the most important works on the Manhattan Project, see the "Suggested Readings." For a general discussion of the use of sources in this web site, see "A Note on Sources." To scan the sources and notes for various categories, choose from the list below. To view the sources and notes for a specific web page, see the footnote at the bottom of each page (exceptions include this page and the home page; the sources and notes for the home page are the first ones listed below). Home Events 1890s-1939: Atomic Discoveries 1939-1942: Early Government Support 1942: Difficult Choices

59

BRIEFING NOTES November 2010  

E-Print Network (OSTI)

Open Pond in 2009 150 Figure 5-18: Three Scenarios for Algae Biofuels from Open Ponds Target Cost $/Gal biofuel industry designed for a target audience of investors, entrepreneurs, policymakers, academicsGTM RESEARCH DECEMBER 2009 COPYRIGHT 2009, GREENTECH MEDIA INC. ALL RIGHTS RESERVED BIOFUELS 2010

Mound, Jon

60

Dairy Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. dairy industry and ways in which electric-powered processes and technologies can be used in milk production and processing. Because of the different processes involved, the characteristics of energy consumption at milk production and processing facilities vary by facility. Most energy used in milk production is in the form of diesel fuel, followed by electricity and then by petroleum products such as gasoline an...

2011-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Meeting Summary Notes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Transportation Stakeholders Forum (NTSF) National Transportation Stakeholders Forum (NTSF) May 26, 2010 Meeting Summary Notes Opening Remarks - Steve O'Connor, DOE Office of Packaging and Transportation Steve O'Connor, DOE/EM Office of Packaging and Transportation welcomed the group to this first National Transportation Stakeholders Forum (NTSF) and thanked the planning committee and the dedication of the Midwest Council of State Government for hosting the meeting. The NTSF will focus on transportation across the DOE complex. Mr. O'Connor announced that the meeting would be recorded and questions for the panel could either be written down and passed to the session moderator or asked via the central microphone. Planners for the meeting have worked to ensure a more engaging panel format and to minimize the use of formal presentations. Mr. O'Connor

62

Towards Service Description Logics  

Science Conference Proceedings (OSTI)

Semantic service description and matchmaking are needed in embedded and disappearing computing, cooperative multiagent systems, and the semantic web. Standard program semantics formalizations are not suited to modeling service semantics, because they ... Keywords: description logics, semantic web

Piero A. Bonatti

2002-09-01T23:59:59.000Z

63

Linear Collider Collaboration Tech Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

NLC Home Page NLC Technical SLAC The LCC Tech Note series was started in July 1998 to document the JLC/NLC collaborative design effort. The notes are numbered sequentially and may also be given a SLAC, FNAL, LBNL, LLNL and/or KEK publication number. The LCC notes will be distributed through the Web in electronic form as PDF files -- the authors are responsible for keeping the original documents. Other document series are the NLC Notes that were started for the SLAC ZDR, the KEK ATF Notes, and at some future time there should be a series of Technical (NLD) Notes to document work on detector studies for the next-generation linear collider. LCC-0001 "Memorandum of Understanding between KEK and SLAC," 2/98. LCC-0002 "Transparencies and Summaries from the 1st ISG meeting: January 1998," G. Loew, ed., 2/98.

64

Coordinator's Notes: Thinking Gender 2009  

E-Print Network (OSTI)

forward to attending Thinking Gender on February 5, 2010, asUntil then… Thinking Gender 2009 Conference Coordinator, TGCOORDINATOR’s NOTES Thinking Gender 2009 Usually, when I

Riojas, Mirasol

2009-01-01T23:59:59.000Z

65

Search notes by: Eyal Amir  

E-Print Network (OSTI)

Search notes by: Eyal Amir April 26, 1997 Abstract Search is ubiquitous in AI. Here we Unguided Search 3 2.1 Breadth First Search

Amir, Eyal

66

Research Park Notes, Issue 20  

NLE Websites -- All DOE Office Websites (Extended Search)

0, September 4, 2001 Welcome to Research Park Notes Look for tidbits of information on National Environmental Research Park activities, observations, and users every couple of...

67

Research Park Notes, Issue 14  

NLE Websites -- All DOE Office Websites (Extended Search)

4, May 29, 2001 Welcome to Research Park Notes Look for tidbits of information on National Environmental Research Park activities, observations, and users every couple of weeks....

68

Research Park Notes, Issue 17  

NLE Websites -- All DOE Office Websites (Extended Search)

7, July 24, 2001 Welcome to Research Park Notes Look for tidbits of information on National Environmental Research Park activities, observations, and users every couple of weeks....

69

Research Park Notes, Issue 16  

NLE Websites -- All DOE Office Websites (Extended Search)

6, July 10, 2001 Welcome to Research Park Notes Look for tidbits of information on National Environmental Research Park activities, observations, and users every couple of weeks....

70

Research Park Notes, Issue 22  

NLE Websites -- All DOE Office Websites (Extended Search)

2, October 2, 2001 Welcome to Research Park Notes Look for tidbits of information on National Environmental Research Park activities, observations, and users every couple of...

71

Research Park Notes, Issue 25  

NLE Websites -- All DOE Office Websites (Extended Search)

5, November 13, 2001 Welcome to Research Park Notes Look for tidbits of information on National Environmental Research Park activities, observations, and users every couple of...

72

Research Park Notes, Issue 15  

NLE Websites -- All DOE Office Websites (Extended Search)

5, June 12, 2001 Welcome to Research Park Notes Look for tidbits of information on National Environmental Research Park activities, observations, and users every couple of weeks....

73

Microsoft Word - Sensing Workshop_Summary Notes.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Stakeholder Workshop for Advanced Sensing in Fossil Energy Applications Stakeholder Workshop for Advanced Sensing in Fossil Energy Applications Summary of Poster Notes from Roundtable Discussions May 8-9, 2010 Funding identified as need/barrier: ï‚· Funding shortfall and advocate support during technology transition from proof of principle or scale-up demonstrations into commercialization or full-scale plant demonstrations ï‚· Some funding and some testing; enough long-term & real environments to get industry support ï‚· Leverage funding with industry to support transition ï‚· More funding to provide value to industry - 53% of power make them better with better measurement ï‚· Funding from small business perceptive

74

Equational descriptions of languages ?  

E-Print Network (OSTI)

This paper is a survey on the equational descriptions of languages. The first part is devoted to Birkhoff’s and Reiterman’s theorems on equational descriptions of varieties. Eilenberg’s variety theorem and its successive generalizations form the second part. The more recent results on equational descriptions of lattices of languages are presented in the third part of the paper. Equations have been used for a long time in mathematics to provide a concise description of various mathematical objects. This article roughly follows a historical approach to present such equational descriptions for formal languages, ranging over a period of 45 years: from Schützenberger’s characterization of star-free languages [36] to the following recent result of [18]: Every lattice of languages admits an equational description. This evolution was made possible by a gradual abstraction of the notion of equation. The story really starts in 1935 with Birkhoff’s theorem on equational

Jean-éric Pin

2012-01-01T23:59:59.000Z

75

Plan Descriptions & Summaries  

NLE Websites -- All DOE Office Websites (Extended Search)

Plan Descriptions & Summaries Retiree Insurance Plans Retiree health and welfare benefits are managed by AonHewitt and Associates. Contact Retiree Insurance Providers Plan...

76

Industry | OpenEI  

Open Energy Info (EERE)

Industry Industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by other industries and construction. Data is only available for Paraguay and the U.S., years 2000 to 2007. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption Industry UN Data application/zip icon XML (zip, 514 bytes) application/zip icon XLS (zip, 425 bytes) Quality Metrics

77

ConsumTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

The The following six sections, one for each energy source and total energy, provide: descriptions of all the data series that are entered into SEDS; the formulas applied in SEDS for creating additional data series; and notes on special circumstances for any series. Appendix A is an alphabetical listing of the variable names and formulas used in consumption estimation; Appendix B lists the conversion factors used to convert physical units into British thermal units and cites the sources for those factors; Appendix C provides the state-level resident pop- ulation data used in per capita calculations; Appendix D presents the real gross domestic product by state used to calculate total energy per real dol- lar of economic output; Appendix E provides metric and other physical conversion factors for measures used in energy analyses; and Appendix F summarizes changes made since the last complete

78

ConsumTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Section Section 1. Documentation Guide This section describes the data identification codes in the State Energy Data System (SEDS). The following six sections, one for each energy source and total energy, provide: descriptions of all the data series that are entered into SEDS; the formulas applied in SEDS for creating additional data series; and notes on special circumstances for any series. Appendix A is an alphabetical listing of the variable names and formulas used in consumption estimation; Appendix B lists the conversion factors used to convert physical units into British thermal units and cites the sources for those factors; Appendix C provides the state-level resident pop- ulation data used in per capita calculations; Appendix D presents the real gross domestic product by state used to calculate total energy per real dol- lar of economic output; Appendix E provides metric and other

79

?-connections of Description Logics  

E-Print Network (OSTI)

this paper is to summarize the general transfer results for E- connections that have recently been obtained in [7]. The generality of the results is due to the fact that are defined and investigated using the framework of so-called abstract description systems (ADSs), a common generalization of description logics, modal logics, logics of time and space, and many other logical formalisms [2]. Thus, we can connect not only DLs with DLs, but also, say, description logics with spatial logics [8]. A natural interpretation of link relations in this context would then be, for instance, to describe the spatial extension of abstract (DL) objects

Oliver Kutz; Carsten Lutz; Frank Wolter; Michael Zakharyaschev

2003-01-01T23:59:59.000Z

80

Project_Descriptions_ITP_ARRA_Awards.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Selections for Industrial Technologies Program Recovery Act Funding Selections for Industrial Technologies Program Recovery Act Funding Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment Award Winners City and State Project Description Total DOE Funding Air Products and Chemicals, Inc. Middletown, OH Waste Energy Project at the AK Steel Corporation Middletown Works. The project will construct a combined cycle power generation plant at the Middletown, OH, works of AK Steel that will capture and process the blast furnace gas (BFG). The BFG, generated in ironmaking operations, is either flared or used to make steam needed for industrial processes . Currently, over 50% of the BFG is flared. This project will utilize

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and posted 2/10/2011 and posted 2/10/2011 *Title, Location Estimated Cost Description Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain $50,000 FONSI: uncertain Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $70,000 Attachment: Memo, Moody to Marcinowski, III, SUBJECT: NEPA 2011 APS for DOE-SRS, Dated: Annual NEPA Planning Summary Environmental Assessments (EAs) Expected to be Initiated in the Next 12 Months Department of Energy (DOE) Savannah River Site (SRS) Jan-11 Estimated Schedule (**NEPA Milestones) South Carolina Department of Health and Environmental Control (SCDHEC) issued a National Pollutant Discharge Elimination System (NPDES) Industrial Stormwater General Permit (IGP) # SCR000000 November 12, with an effective date of January

82

Processor Description Languages  

Science Conference Proceedings (OSTI)

Efficient design of embedded processors plays a critical role in embedded systems design. Processor description languages and their associated specification, exploration and rapid prototyping methodologies are used to find the best possible design for ... Keywords: Computer Architecture, Computer Science

Prabhat Mishra; Nikil Dutt

2008-05-01T23:59:59.000Z

83

B Plant facility description  

SciTech Connect

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

84

Industrial Applications  

Science Conference Proceedings (OSTI)

Table 2   Frequently used rubber linings in other industries...Application Lining Power industry Scrubber towers Blended chlorobutyl Limestone slurry tanks Blended chlorobutyl Slurry piping Blended chlorobutyl 60 Shore A hardness natural rubber Seawater cooling water

85

Industrial Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Industrial Industrial / Manufacturing Buildings Industrial/manufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey (MECS). See the MECS home page for further information. Commercial buildings found on a manufacturing industrial complex, such as an office building for a manufacturer, are not considered to be commercial if they have the same owner and operator as the industrial complex. However, they would be counted in the CBECS if they were owned and operated independently of the manufacturing industrial complex. Specific questions may be directed to: Joelle Michaels joelle.michaels@eia.doe.gov CBECS Manager Release date: January 21, 2003 Page last modified: May 5, 2009 10:18 AM http://www.eia.gov/consumption/commercial/data/archive/cbecs/pba99/industrial.html

86

Industries Affected  

Science Conference Proceedings (OSTI)

Table 2   Industries affected by microbiologically influenced corrosion...generation: nuclear, hydro, fossil fuel,

87

Linear Collider Collaboration Tech Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes Notes LCC - 0038 29/04/00 CBP Tech Note - 234 Transverse Field Profile of the NLC Damping Rings Electromagnet Wiggler 29 April 2000 17 J. Corlett and S. Marks Lawrence Berkeley National Laboratory M. C. Ross Stanford Linear Accelerator Center Stanford, CA Abstract: The primary effort for damping ring wiggler studies has been to develop a credible radiation hard electromagnet wiggler conceptual design that meets NLC main electron and positron damping ring physics requirements [1]. Based upon an early assessment of requirements, a hybrid magnet similar to existing designs satisfies basic requirements. However, radiation damage is potentially a serious problem for the Nd-Fe-B permanent magnet material, and cost remains an issue for samarium cobalt magnets. Superconducting magnet designs have not been

88

14th Annual EPRI NDE Issues Meeting Notes  

Science Conference Proceedings (OSTI)

The 14th Annual EPRI NDE Issues Meeting Notes contains all presentations and technical information presented during the annual NDE meeting held July 27-28, 2004 at Hilton Head, South Carolina. The annual EPRI NDE Issues Meeting provides a forum in which all participants have an equal opportunity to discuss and exchange information concerning current and emerging nondestructive evaluation (NDE) issues. Invited speakers add to the discussion through formal presentations on current industry issues that are ...

2004-10-20T23:59:59.000Z

89

Public Health Guidance Note Mercury  

E-Print Network (OSTI)

Mercury (Hg) occurs in nature as the mineral cinnibar (red mercuric sulfide) and has found widespread use in industry. The commercial

unknown authors

2002-01-01T23:59:59.000Z

90

,"Utah Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Utah Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","52013"...

91

,"Texas Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Workbook Contents" ,"Texas Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of...

92

,"U.S. Natural Gas Average Annual Consumption per Industrial...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Natural Gas Average Annual Consumption per Industrial Consumer (Mcf)",1,"Annual",2011...

93

,"Ohio Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Ohio Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013"...

94

,"Oregon Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Oregon Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

95

,"Montana Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

ame","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Montana Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

96

,"Kansas Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Kansas Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

97

,"Indiana Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

ame","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Indiana Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

98

,"Maine Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Maine Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

99

,"Arizona Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

ame","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Arizona Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

100

,"Wyoming Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

ame","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Wyoming Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

,"Vermont Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Vermont Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013"...

102

,"Michigan Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Michigan Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013"...

103

,"Texas Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Texas Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","52013"...

104

Property:Distributed Generation/Site Description | Open Energy Information  

Open Energy Info (EERE)

Generation/Site Description Generation/Site Description Jump to: navigation, search This is a property of type String. The allowed values for this property are: Agricultural Commercial-Hotel Commercial-Ice Arena Commercial-High Rise Office Commercial-Low Rise Office Commercial-Refrigerated Warehouse Commercial-Restaurant Commercial-Retail Store Commercial-Supermarket Commercial-Theater Commercial-Other Institutional-Hospital/Health Care Institutional-Nursing Home Institutional-School/University Institutional-Other Residential-Multifamily-Single Building Residential-Multifamily-Multibuilding Residential-Single Family Industrial-Food Processing Industrial-Plastics Processing Industrial-Wood Products Industrial-Other Testing Laboratory Water Utility Other Utility Other Pages using the property "Distributed Generation/Site Description"

105

industrial sector | OpenEI  

Open Energy Info (EERE)

industrial sector industrial sector Dataset Summary Description Biomass energy consumption and electricity net generation in the industrial sector by industry and energy source in 2008. This data is published and compiled by the U.S. Energy Information Administration (EIA). Source EIA Date Released August 01st, 2010 (4 years ago) Date Updated August 01st, 2010 (4 years ago) Keywords 2008 biomass consumption industrial sector Data application/vnd.ms-excel icon industrial_biomass_energy_consumption_and_electricity_2008.xls (xls, 27.6 KiB) Quality Metrics Level of Review Peer Reviewed Comment Temporal and Spatial Coverage Frequency Annually Time Period 2008 License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset Usefulness of the metadata

106

University Location Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Location Project Description Location Project Description Boise State University Boise, Idaho Boise State University has undertaken a study of the structural setting and geothermal potential at Neal Hot Springs that will integrate geology, geochemistry, and geophysics to analyze the site on the western Snake River plain. Boise State will determine if Neal Hot Springs sustains the necessary rock dilation and conduit pathways for hydrothermal fluid flow and successful geothermal development. The result will be new data acquisition, including a deep geophysical survey and fault surface data. Colorado School of Mines Golden, Colorado Colorado School of Mines will conduct an investigation near Homedale, Idaho, an area that straddles volcanic rock and unconsolidated sediments.

107

Detailed Course Module Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Course Module Description Course Module Description Module/Learning Objectives Level of Detail in Module by Audience Consumers Gen Ed/ Community College Trades 1. Energy Issues and Building Solutions High High High Learning Objectives: * Define terms of building science, ecological systems, economics of consumption * Relate building science perspective, ecology, social science * Explain historical energy and environmental issues related to buildings * Compare Site and source energy * Examine the health, safety and comfort issues in buildings * Examine the general context for building solutions (zero energy green home with durability as the goal) * Explain a basic overview of alternative energy (total solar flux) - do we have enough energy * Examine cash flow to homeowners

108

Industry @ ALS  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry @ ALS Industry @ ALS Industry @ ALS Concrete Industry Benefits from Ancient Romans and the ALS Print Thursday, 17 October 2013 14:24 New insights into the Romans' ingenious concrete harbor structures emerging from ALS beamline research could move the modern concrete industry toward its goal of a reduced carbon footprint. Summary Slide Read more... Moving Industry Forward: Finding the Environmental Opportunity in Biochar Print Thursday, 12 September 2013 08:41 Using ALS Beamlines 10.3.2 and 8.3.2, the Environmental Protection Agency (EPA) is currently investigating how biochar sorbs environmental toxins and which kinds of biochar are the most effective. The possibilities for widespread use have already launched entrepreneurial commercial ventures. Summary Slide

109

Explanatory Notes Explanatory Notes The EIA-782 Surveys Background  

Gasoline and Diesel Fuel Update (EIA)

Explanatory Notes Explanatory Notes The EIA-782 Surveys Background The EIA-782 surveys were implemented in 1983 to fulfill the data requirements necessary to meet En- ergy Information Administration (EIA) legislative mandates and user community data needs. The re- quirements include petroleum product price, market distribution, demand (or sales), and product supply data, which are needed for a complete evaluation of petroleum market performance. The EIA-782 series includes the Form EIA-782A, "Refiners'/Gas Plant Operators' Monthly Petroleum Product Sales Re- port"; Form EIA-782B, "Resellers'/Retailers' Monthly Petroleum Product Sales Report"; and Form EIA- 782C, "Monthly Report of Prime Supplier Sales of Petroleum Products Sold for Local Consumption."

110

Company Level Imports Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Company Level Imports Explanatory Notes Company Level Imports Explanatory Notes Notice: Ongoing analysis of imports data to the Energy Information Administration reveals that some imports are not correctly reported on Form EIA-814 "Monthly Imports Report". Contact with the companies provides sufficient information for EIA to include these imports in the data even though they have not provided complete reports on Form EIA-814. Estimates are included in aggregate data, but the estimates are not included in the file of Company-Level Imports. Therefore, summation of volumes for PAD Districts 1-5 from the Company-Level Imports will not equal aggregate import totals. Explanation of Codes Used in Imports Database Files SURVEY_ID EIA-814 Survey Form Number for Collecting Petroleum Import Statistics

111

Linear Collider Collaboration Tech Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes Notes LCC - 0018, 15/06/99 Rev B, June 2002 Correct Account of RF Deflections in Linac Acceleration June 15, 1999 G.V. Stupakov Stanford Linear Accelerator Center Stanford, California Abstract: During acceleration in the linac structure, the beam not only increases its longitudinal momentum, but also experiences a transverse kick from the accelerating mode which is linear in accelerating gradient. This effect is neglected in such computer codes as LIAR and TRANSPORT. We derived the Hamiltonian equations that describe the effect of RF deflection into the acceleration process and included it into the computational engine of LIAR. By comparing orbits for the NLC main linac, we found that the difference between the two algorithms is about 10\%. The effect will be more pronounced at smaller

112

Linear Collider Collaboration Tech Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

4, 10/03/00 4, 10/03/00 Luminosity for NLC Design Variations March 10, 1999 K.A. Thompson and T.O. Raubenheimer Stanford Linear Accelerator Center Stanford, CA, USA Abstract: In this note we give Guineapig simulation results for the luminosity and luminosity spectrum of three baseline NLC designs at 0.5~TeV and 1.0~TeV and compare the simulation results with analytic approximations. We examine the effects of varying several design parameters away from the NLC-B-500 and NLC-B-1000 designs, in order to study possible trade-offs of parameters that could ease tolerances, increase luminosity, or help to optimize machine operation for specific physics processes. Luminosity for NLC Design Variations K.A. Thompson and T.O.Raubenheimer INTRODUCTION In this note we give Guineapig [l] simulation results for the luminosity and

113

Format for Generic Task Description  

Science Conference Proceedings (OSTI)

Task: Submitting Proposals. Containing Scenario: Fast Tracking a Battery Standard Description: Review of the proposed ...

114

NAICS Codes Description:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Codes Codes Description: Filters: Date Signed only show values between '10/01/2006' and '09/30/2007', Contracting Agency ID show only ('8900'), Contracting Office ID show only ('00001') Contracting Agency ID: 8900, Contracting Office ID: 00001 NAICS Code NAICS Description Actions Action Obligation 541519 OTHER COMPUTER RELATED SERVICES 251 $164,546,671 541611 ADMINISTRATIVE MANAGEMENT AND GENERAL MANAGEMENT CONSULTING SERVICES 236 $52,396,806 514210 DATA PROCESSING SERVICES 195 $28,941,727 531210 OFFICES OF REAL ESTATE AGENTS AND BROKERS 190 $6,460,652 541330 ENGINEERING SERVICES 165 $33,006,079 163 $11,515,387 541690 OTHER SCIENTIFIC AND TECHNICAL CONSULTING SERVICES 92 $40,527,088 531390 OTHER ACTIVITIES RELATED TO REAL ESTATE 79 -$659,654 337214 OFFICE FURNITURE (EXCEPT WOOD) MANUFACTURING 78 $1,651,732

115

Proposal Review Panel Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Review Panel Descriptions Proposal Review Panel Descriptions To ensure competent scientific review, a proposal may be assigned to a different panel (at the discretion of the Review Panel Chair), or the panel may seek additional ad hoc reviews from other experts. High-Pressure This panel reviews scattering and diffraction proposals that focus on materials at high pressure. Techniques such as (but not limited to) diffraction, nuclear resonant scattering, and inelastic x-ray scattering for materials at high pressure are appropriate for this panel to consider. Instrumentation This panel reviews proposals related to the development of beamline instrumentation, sample environments, x-ray optical components, and/or detectors that are relevant to synchrotron radiation research. This panel

116

Descriptions of Past Research  

Science Conference Proceedings (OSTI)

This product is a compilation of over one-hundred product summaries describing EPRI research performed over the previous twenty years. The summaries are arranged according to categories of generators, steam turbines, software, Technology Innovation (formerly Strategic Science and Technology) reports, and miscellaneous. Each product summary contains an abstract, a description of objective, approach, and results, and an EPRI perspective. This document is a useful reference resource for EPRI member organiza...

2006-05-19T23:59:59.000Z

117

EM QA Working Group September 2011 Notes  

Energy.gov (U.S. Department of Energy (DOE))

Meeting minutes and notes from the EM QA Working Group video conference meeting held in September 2011.

118

Appendix A Explanatory Notes - Energy Information Administration  

U.S. Energy Information Administration (EIA)

October 2013 U.S. Energy Information Administration | Natural Gas Monthly 89 Appendix A Explanatory Notes The Energy Information ...

119

Concentrating solar collector: technical note  

DOE Green Energy (OSTI)

The Acurex Model 3002 concentrator is a reflecting parabolic trough collector designed to heat liquids or gases to temperatures between 140/sup 0/F and 350/sup 0/F. The cost effectiveness, performance, reliability, and technical description of the collector are presented.

Not Available

1984-01-01T23:59:59.000Z

120

Lecture notes for criticality safety  

Science Conference Proceedings (OSTI)

These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein's mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented.

Fullwood, R.

1992-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

MCO Monitoring activity description  

Science Conference Proceedings (OSTI)

Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description.

SEXTON, R.A.

1998-11-09T23:59:59.000Z

122

Technology assessment of offshore industry. The United States offshore industry. Current status, trends and forecast 1976-2000. Volume I. Final report  

SciTech Connect

Volume One presents a description of the current status of the U.S. offshore industry together with developing trends in the industry and an examination of the various forces that influence development. A 25 year forecast of offshore industry development is included. Also included is a description of the U.S. commercial ocean fishing industry and a 25 year forecast of industry development.

Durfee, J.H.

1977-08-01T23:59:59.000Z

123

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Heat Content of Natural Gas Consumed Heat Content of Natural Gas Consumed Definitions Key Terms Definition British Thermal Unit (Btu) The quantity of heat required to raise the temperature of 1 pound of liquid water by 1 degree Fahrenheit at the temperature at which water has its greatest density (approximately 39 degrees Fahrenheit). Delivered to Consumers (Heat Content) Heat content of residential, commercial, industrial, vehicle fuel and electric power deliveries to consumers. Electric Power (Heat Content) Heat content of natural gas used as fuel in the electric power sector. Heat Content The amount of heat energy available to be released by the transformation or use of a specified physical unit of an energy form (e.g., a ton of coal, a barrel of oil, a kilowatthour of electricity, a cubic foot of natural gas, or a pound of steam). The amount of heat energy is commonly expressed in British thermal units (Btu). Note: Heat content of combustible energy forms can be expressed in terms of either gross heat content (higher or upper heating value) or net heat content (lower heating value), depending upon whether or not the available heat energy includes or excludes the energy used to vaporize water (contained in the original energy form or created during the combustion process). The Energy Information Administration typically uses gross heat content values.

124

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Technology Description Property Type Text Pages using the property "Technology Description" Showing 25 pages using this property. (previous 25) (next 25) M MHK Technologies/14 MW OTECPOWER + MINIMIZE SURFACE ACTIVITIES TO REDUCE THE CAPITAL COST AND TO IMPROVE EFFICIENCY ALTERNATE WORKING FLUIDS ARE USED FOR ENHANCED POWER EFFICIENCY IN OPTEC POWER HYBRID CYCLES ARE USED TO IMPROVE POWER AND NEED WITH SUBSEA HEAT EXCHANGERS ADVANCED SUPPORTING VESSEL CONCEPT AND FREE STANDING RISER TECHNOLOGIES TO WITH STAND HARSH OCEAN ENVIRONMENT IN DEEPWATER HAD BEEN DEVELOPED FOR THIS OPTEC POWER IT IS THE ONLY RELIABLE AND PROFITABLE RENEWABLE ENERGY SOURCE FOR THE NEED OF WORLD ENERGY FOR THE NEXT DECADE DESALINATION AND HDROGEN PRODUCTION ARE LINKED TO THE POWER GENERATION OF THE OTEC POWER FOR SEVERAL BY PRODUCTS COST EFFECTIVE PRODUCTION CLEAN ENERGY AND CLEAN WATER IS THE GOAL OF OTECPOWER INC OUR 14 MW OTEC POWER COSTS 50 MILLION USD ALL EQUIPMENT HAD BEEN DESINGED AND A FEW OF THEM ARE TESTED FOR OIL AND GAS INDUSTRY APPLICATION WHICHA RE BEING USED FOR OTECPOWER A RELIABLE AND FEASIBLE OTECPOWER IS PROPOSED

125

Linear Collider Collaboration Tech Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

0 0 April 2001 Rev.1 July 2003 Guide to LIBXSIF, a Library for Parsing the Extended Standard Input Format of Accelerated Beamlines Peter G. Tenenbaum Stanford Linear Accelerator Center Stanford University Stanford, CA Abstract: We describe LIBXSIF, a standalone library for parsing the Extended Standard Input Format of accelerator beamlines. Included in the description are: documentation of user commands; full description of permitted accelerator elements and their attributes; the construction of beamline lists; the mechanics of adding LIBXSIF to an existing program; and "under the hood" details for users who wish to modify the library or are merely morbidly curious. Guide to LIBXSIF, a Library for Parsing the Extended Standard Input Format of

126

SUMMARY NOTES RESEARCH NEEDS SESSION*  

E-Print Network (OSTI)

Research Institute U.S. Department of Energy, Office of Industrial Programs U.S. Department of Energy, Argonne National Laboratory U.S. Department of Energy, Solar Energy Research Institute U.S. Department of Energy, Community Technology Systems Branch U.S. Environmental Protection Agency, Office of Solid Wastes

Columbia University

127

Number: 1394 Description: In what ...  

Science Conference Proceedings (OSTI)

... Number: 1752 Description: When was the Oklahoma City bombing? ... name of the plane that dropped the Atomic Bomb on Hiroshima? ...

2003-02-12T23:59:59.000Z

128

Number: 894 Description: How far is it ...  

Science Conference Proceedings (OSTI)

... Number: 1198 Description: When was Hiroshima bombed? ... 1264 Description: What is the atomic weight of ...

2002-04-29T23:59:59.000Z

129

Minimum Description Length Model Selection  

E-Print Network (OSTI)

Minimum Description Length Model Selection Problems and Extensions Steven de Rooij #12;#12;Minimum Description Length Model Selection Problems and Extensions #12;ILLC Dissertation Series DS-2008-07 For further-mail: illc@science.uva.nl homepage: http://www.illc.uva.nl/ #12;Minimum Description Length Model Selection

130

Description of Proposed Action  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carlsbad Field Office Carlsbad Field Office RECORD OF CATEGORICAL EXCLUSION DETERMINATION 1 Description of Proposed Action Performance of a three-dimensional seismic survey line on approximately 2,409 acres contained within the WIPP Land Withdrawal Area as part of a larger survey to determine whether hydrocarbons are present in the region in quantities that warrant extraction and development. Number and Title of Applicable Categorical Exclusion B3.1 Site Characterization/Environmental Monitoring Activities covered by this Categorical Exclusion include, but are not limited to, site characterization and environmental monitoring under CERCLA and RCRA. Specific activities include, but are not limited to: (a) Geological, geophysical (such as gravity, magnetic, electrical, seismic, and radar), geochemical, and

131

International industrial sector energy efficiency policies  

SciTech Connect

Over 40 percent of the energy consumed globally is used in the industrial sector. In China, this sector consumes an even larger proportion, reaching nearly 70 percent in 1997. A variety of energy efficiency policies and programs have been instituted in both industrialized and developing countries in an effort to improve the energy efficiency of the industrial sector. There are very few comprehensive evaluations of these industrial sector energy efficiency policies; however a number of recent workshops and conferences have included a focus on these policies. Three important meetings were the International Energy Agency's Industrial Energy Efficiency: Policies and Programs Conference in 1994, Industrial Energy Efficiency Policies: Understanding Success and Failure - A Workshop Organized by the International Network for Energy Demand Analysis in the Industrial Sector in 1998, and the American Council for an Energy-Efficient Economy's 1999 Summer Study on Energy Efficiency in Industry. Man y articles from these meetings are included as attachments to this memo. This paper provides a brief description of each of seven categories of individual industrial energy efficiency policies and programs, discuss which industrial sectors or types of equipment they apply to, and provide references for articles and reports that discuss each policy or program in more detail. We begin with mandatory-type policies and move to more voluntary-type policies. We then provide a brief description of four integrated industrial energy efficiency policies and provide references for articles and reports that describe these policies in greater detail.

Price, Lynn; Worrell, Ernst

2000-01-01T23:59:59.000Z

132

International industrial sector energy efficiency policies  

SciTech Connect

Over 40 percent of the energy consumed globally is used in the industrial sector. In China, this sector consumes an even larger proportion, reaching nearly 70 percent in 1997. A variety of energy efficiency policies and programs have been instituted in both industrialized and developing countries in an effort to improve the energy efficiency of the industrial sector. There are very few comprehensive evaluations of these industrial sector energy efficiency policies; however a number of recent workshops and conferences have included a focus on these policies. Three important meetings were the International Energy Agency's Industrial Energy Efficiency: Policies and Programs Conference in 1994, Industrial Energy Efficiency Policies: Understanding Success and Failure - A Workshop Organized by the International Network for Energy Demand Analysis in the Industrial Sector in 1998, and the American Council for an Energy-Efficient Economy's 1999 Summer Study on Energy Efficiency in Industry. Man y articles from these meetings are included as attachments to this memo. This paper provides a brief description of each of seven categories of individual industrial energy efficiency policies and programs, discuss which industrial sectors or types of equipment they apply to, and provide references for articles and reports that discuss each policy or program in more detail. We begin with mandatory-type policies and move to more voluntary-type policies. We then provide a brief description of four integrated industrial energy efficiency policies and provide references for articles and reports that describe these policies in greater detail.

Price, Lynn; Worrell, Ernst

2000-01-01T23:59:59.000Z

133

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

134

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

135

BUILDING TECHNOLOGIES PROGRAM CODE NOTES  

NLE Websites -- All DOE Office Websites (Extended Search)

IECC IECC BUILDING TECHNOLOGIES PROGRAM CODE NOTES 1 The intent of the pipe insulation requirements is to reduce temperature changes while fluids are being transported through piping associated with heating, cooling or service hot water (SHW) systems, thereby saving energy and reducing operating costs. Uninsulated piping systems that transport fluids can create water temperature irregularities, which ultimately requires additional heating or cooling and associated energy costs to bring the water to operating temperature. Any piping that carries heated or cooled water, including piping systems with external heating (e.g., heat trace or impedance heating), should be thermally insulated to reduce heat loss or gain, allowing the fluid to be delivered at the intended temperature.

136

Notes on fundamental bit design  

SciTech Connect

This paper points out that the standard industry bit in use in 1951 was a three-cone, steel-tooth bit utilizing slush-lubricated ball and roller bearings and drilled water courses. By the mid-1950s, sintered tungsten carbide tooth bits with jets that direct drilling fluid into the bottom of the hole were perfected. These bits traditionally were used only in very hard formations while steel bits were used for other formations. In the early 1960s, the pressure compensated lubrication system and sealed ball- and roller-bearings were developed. By 1970, pressure-compensated sealed lubricated bits were the standard of the drilling industry. Though their design was considerably more complicated, improved performance made them more economical. Extended bearing life made the carbide tooth bit practical for medium hard formations.

Jumo, A.C.

1986-10-01T23:59:59.000Z

137

Chronological List of Books Note on the illustrations: The descriptions of the one hundred books  

E-Print Network (OSTI)

and Its Enemies, by Karl R. Popper (1945) Atomic Energy for Military Purposes: The Official Report on the Development of the Atomic Bomb under the Auspices of the United States Government, 19401945, by Henry De Wolf

Landweber, Laura

138

Note on the hydrodynamic description of thin nematic films: strong anchoring model  

E-Print Network (OSTI)

We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively different behaviour. We consolidate the various approaches and show that the long-wave model derived through an asymptotic expansion of the full nemato-hydrodynamic equations with consistent boundary conditions agrees with the model one obtains by employing a thermodynamically motivated gradient dynamics formulation based on an underlying free energy functional. As a result, we find that in the case of strong anchoring the elastic distortion energy is always stabilising. To support the discussion in the main part of the paper, an appendix gives the full derivation of the evolution equation for the film thickness via asymptotic expansion.

Te-Sheng Lin; Linda J. Cummings; Andrew J. Archer; Lou Kondic; Uwe Thiele

2013-01-17T23:59:59.000Z

139

transportation industry | OpenEI  

Open Energy Info (EERE)

25 25 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142279625 Varnish cache server transportation industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by the transportation industry. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption

140

129 Lecture Notes Relativistic Quantum Mechanics  

E-Print Network (OSTI)

129 Lecture Notes Relativistic Quantum Mechanics 1 Need for Relativistic Quantum Mechanics's equation of motion in mechanics. The initial condtions to solve the Newton's equation of motion

Murayama, Hitoshi

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

NETL: LabNotes - September 2008  

NLE Websites -- All DOE Office Websites (Extended Search)

Student says studying biogas at NETL was a great learning experience (Editor's note: Penn State student Justin Weber spent his summer at NETL studying the effectiveness of a...

142

A Note on the Consumption Function  

E-Print Network (OSTI)

Zeldes, S. (1989) ‘ Consumption and Liquidity Constraints:A Note on the Consumption Function Douglas G.Steigerwald Consumption Function The international

Steigerwald, Douglas G

2009-01-01T23:59:59.000Z

143

DOE Sustainability Assistance Network (SAN) Notes, Thursday,...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 of 4 DOE Sustainability Assistance Network (SAN) Notes Thursday, November 15, 2012 1. Sustainability Performance Office Highlights Paul Estabrooks, SPO The Sustainability...

144

Table Definitions, Sources, and Explanatory Notes  

Annual Energy Outlook 2012 (EIA)

refer to the EIA Energy Glossary. Sources Energy Information Administration, Office of Oil and Gas Explanatory Notes Shale Gas production data collected in conjunction with...

145

Mac OS X Installation Notes for EXPGUI  

Science Conference Proceedings (OSTI)

... of the following steps: On the finder window for the ... Proceed through the windows by pressing Continue (note ... Mac OS X books that cover this subject ...

146

COURSE NOTES: Nuclear Materials (NE120)  

Science Conference Proceedings (OSTI)

Feb 10, 2007 ... This resource provides PDF lecture notes and readings for an undergraduate course covering materials issues in nuclear power systems.

147

MODELING IN COMPUTATIONAL BIOLOGY NOTES OF ... - CECM  

E-Print Network (OSTI)

MODELING IN COMPUTATIONAL BIOLOGY. NOTES OF WEEK 9. 1. Fully Observed Markov Model: F. Sometimes we want to model a process of generating ...

148

Linear Collider Collaboration Tech Notes LCC-0076  

NLE Websites -- All DOE Office Websites (Extended Search)

6 CBPTech Note - 238 November 2001 Transport Lines for the NLC Damping Rings Andrzej Wolski November 2001 Lawrence Berkeley National Laboratory Berkeley, California Abstract: The...

149

References and Notes for Astatine ( At )  

Science Conference Proceedings (OSTI)

... Switch to Formatted Version References and Notes for Astatine ( At ). M64a R. McLaughlin, J. Opt. Soc. Am. 54, 965 (1964).

150

References and Notes for Astatine ( At )  

Science Conference Proceedings (OSTI)

... Version References and Notes for Astatine ( At ). Ref. ID, Reference, M64a, R. McLaughlin, J. Opt. Soc. Am. 54, 965 (1964).

151

Microsoft Word - Proposal Form Description and Guidelines-rev.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Description and Form Description and Guidelines Please read the Proposal Form Description and Guidelines entirely before submitting a CNM Proposal You must register online through the User Facility Registration System BEFORE submitting a CNM Proposal. All individuals coming to Argonne must register, receive a badge number, and receive access permission for arrival. You will receive a badge number by e-mail. To log on to the Online User Proposal System for the first time, enter your badge number and also use your badge number for your initial password. Once you are logged in, the system will ask you to change your password. The CNM proposal has seven sections, each accessed by a tab on the online form. Note: All proposals MUST be submitted through the web-based system.

152

Tracking and physics validation studies of the simplified geometry description with $B^0_{(s)} \\to h^+h^{'-}$ decays  

E-Print Network (OSTI)

This note validates the usage of the simplified detector geometry description. A sample of $B^0_{(s)} \\to h^+h^{'-}$ decays was used to assess the tracking and physics performance with respect to what is obtained with the full detector description. No significant degradation of performance was found.

M. Gersabeck; E. Rodrigues

2008-08-06T23:59:59.000Z

153

Associations and Industry - TMS  

Science Conference Proceedings (OSTI)

... Associations and Industry, Research Programs, ==== Basic Metallurgy ==== ... FORUMS > ASSOCIATIONS AND INDUSTRY, Replies, Views, Originator, Last ...

154

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Residual Fuel Imports by State Residual Fuel Imports by State Definitions Key Terms Definition Barrel A unit of volume equal to 42 U.S. gallons. Imports Receipts of crude oil and petroleum products into the 50 States and the District of Columbia from foreign countries, Puerto Rico, the Virgin Islands, and other U.S. possessions and territories. Petroleum Administration for Defense (PAD) Districts Geographic aggregations of the 50 States and the District of Columbia into five districts by the Petroleum Administration for Defense in 1950. These districts were originally defined during World War II for purposes of administering oil allocation. Description and maps of PAD Districts and Refining Districts. Residual Fuel Oil A general classification for the heavier oils, known as No. 5 and No. 6 fuel oils, that remain after the distillate fuel oils and lighter hydrocarbons are distilled away in refinery operations. It conforms to ASTM Specifications D396 and D975 and Federal Specification VV-F-815C. No. 5, a residual fuel oil of medium viscosity, is also known as Navy Special and is defined in Military Specification MIL-F-859E, including Amendment 2 (NATO Symbol F-770). It is used in steam-powered vessels in government service and inshore powerplants. No. 6 fuel oil includes Bunker C fuel oil and is used for the production of electric power, space heating, vessel bunkering, and various industrial purposes.

155

Industrial alliances  

Science Conference Proceedings (OSTI)

The United States is emerging from the Cold War era into an exciting, but challenging future. Improving the economic competitiveness of our Nation is essential both for improving the quality of life in the United States and maintaining a strong national security. The research and technical skills used to maintain a leading edge in defense and energy now should be used to help meet the challenge of maintaining, regaining, and establishing US leadership in industrial technologies. Companies recognize that success in the world marketplace depends on products that are at the leading edge of technology, with competitive cost, quality, and performance. Los Alamos National Laboratory and its Industrial Partnership Center (IPC) has the strategic goal to make a strong contribution to the nation`s economic competitiveness by leveraging the government`s investment at the Laboratory: personnel, infrastructure, and technological expertise.

Adams, K.V.

1993-09-13T23:59:59.000Z

156

Notes from DOE/EPRI Meeting on Phase II Mercury Field Test Needs  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes Notes DOE/EPRI meeting on Phase II Mercury Field Test Needs Washington DC June 5, 2002 Attendees (phone/e-mail at end of notes) AEP - Gary Spitznogle EPRI - Stu Dalton DOE - Scott Renninger EPRI - George Offen DOE - Tom Feeley GRE - Mark Strohfus Duke - Tim Shawver Southern - Larry Monroe EPA - Jim Kilgroe TVA - Tom Burnett TXU - David Lamb DOE and EPRI jointly convened this meeting to obtain feedback from deeply involved industry members on the needs, scope, schedule, etc. for a second phase of full-scale, longer-term field tests of mercury controls on power plants. The program objectives would be to determine performance and costs of the major near-term control approaches with the hope of using this information both to inform the regulatory (MACT) and legislative (Clear Skies Initiative, CSI) processes as well as industry selections of

157

NETL: LabNotes - November 2013  

NLE Websites -- All DOE Office Websites (Extended Search)

Batteries May Help Keep the Lights On Unlike many commodity-based industries, the energy industry must match with reasonable accuracy the electricity they supply with consumer...

158

Industrial Carbon Capture Project Selections  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(Partner Organizations) Funding Lead Organization Location (City, State) Project Title - Project Description 1) Large Scale Testing of Advanced Gasification Technologies Air Products & Chemicals, Inc. $71,700,000 Allentown, PA Development of ITM Oxygen Technology for Integration with Advanced Industrial Systems Air Products will accelerate commercial manufacture of ion transport membranes modules and initiate the development a 2,000 TPD pre- commercial scale facility ahead of schedule, enabling this technology

159

Integrated Safety Management (ISM) - System Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

System Descriptions Integrated Safety Management (ISM) ism logo Sample DOE Contractor ISM System Descriptions Sample DOE Site Office ISM System Descriptions DOE HQ Program Office...

160

Original Workshop Proposal and Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Proposal and Description Visualization Requirements for Computational Science and Engineering Applications Proposal for a DoE Workshop to Be Held at the...

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

TESLA-LNF TECHNICAL NOTE Divisione Acceleratori  

E-Print Network (OSTI)

TESLA-LNF TECHNICAL NOTE _____________ Divisione Acceleratori Frascati, November 20, 2003 Note: TESLA Report 2003-26 TESLA DAMPING RING: INJECTION/EXTRACTION SCHEMES WITH RF DEFLECTORS D. Alesini, S/extraction schemes in the Damping Ring of TESLA using RF deflectors. We illustrate different possible solutions using

162

Manhattan Project: A Note on Sources  

Office of Scientific and Technical Information (OSTI)

A NOTE ON SOURCES A NOTE ON SOURCES Resources > Note on Sources The text for this web site is a combination of original material and adaptations from previous publications of the Department of Energy (including contractors), its predecessor agencies (primarily the Atomic Energy Commission and the Manhattan Engineer District), and other government agencies. Adaptations run the gamut from summaries to close paraphrases to text being taken directly. This material was gathered and adapted for use by the DOE's Office of History and Heritage Resources. For detailed notes on what sources were used for any particular page, see the footnote at the bottom of the page or its entry in Sources and Notes. For a discussion of the best general sources on the Manhattan Project, see the Suggested Readings.

163

SA TEC Meeting Notes -- Final  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 6-7, 2008 February 6-7, 2008 San Antonio, Texas U.S DEPARTMENT OF ENERGY TRANSPORTATION EXTERNAL COORDINATION WORKING GROUP MEETING February 6-7, 2008 San Antonio, Texas Welcome and Meeting Overview The U.S. Department of Energy (DOE), Transportation External Coordination (TEC) Working Group held its 29th meeting on February 6-7, 2008, in San Antonio, Texas. One hundred thirty- one participants from government, industry, professional organizations, and other interested parties met to address a variety of issues related to radioactive materials transportation. The TEC process involves these key stakeholders in developing solutions to DOE transportation issues. These meetings provide continuing and improved coordination between DOE, other levels of government, and outside organizations with DOE transportation-related responsibilities.

164

Colorado Cleantech Industry Association | Open Energy Information  

Open Energy Info (EERE)

Industry Association Industry Association Jump to: navigation, search Logo: Colorado Cleantech Industry Association Name Colorado Cleantech Industry Association Address 1445 Market Street Place Denver, Colorado Zip 80202 Region Rockies Area Website http://www.coloradocleantech.c Notes CCIA is a new statewide organization dedicated to promoting Colorado's cleantech industry Coordinates 39.748929°, -105.000114° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.748929,"lon":-105.000114,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

165

The fuzzy description logic ALCFLH  

E-Print Network (OSTI)

We present the fuzzy description logic ALCF LH. ALCF LH is based on ALCF H, but linear hedges are used instead of exponential ones. This allows to solve the entailment and the subsumption problem in a fuzzy description logic, where arbitrary concepts and roles may be modified. 1

Steffen Hölldobler; Nguyen Hoang Nga; Technische Universität Dresden; Tran Dinh Khang

2005-01-01T23:59:59.000Z

166

Transforming the Freight Industry  

E-Print Network (OSTI)

Transforming the Freight Industry From Regulation to Icommon-carrier freight industry was Competition to backwardjourneys. When the freight industry was deregulated, it was

Regan, Amelia

2002-01-01T23:59:59.000Z

167

Demographics and industry returns  

E-Print Network (OSTI)

Demographics and Industry Returns By Stefano DellaVigna andand returns across industries. Cohort size fluc- tuationspredict profitability by industry. Moreover, forecast demand

Pollet, Joshua A.; DellaVigna, Stefano

2007-01-01T23:59:59.000Z

168

The Industrial Tools of the Trade  

Science Conference Proceedings (OSTI)

Organized by R&D Applications Centers/Offices, this handbook provides TechCommentaries (including a description of a technology, technical considerations, economic considerations, applications, advantages), TechApplications (featuring case study information on an attractive technology), and Industry Briefs (describing a particular industry with data and trends on energy use, employment, revenue, manufacturing methods, demand-side management methods, trade associations, and information sources).

1995-12-01T23:59:59.000Z

169

Industry Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

idatech.com idatech.com info@idatech.com 63065 NE 18 th Street Bend, OR 97701 541.383.3390 Industry Perspective Biogas and Fuel Cell Workshop National Renewable Energy Laboratory June 11 - 13, 2012 Mike Hicks Chairman of the Board of Directors, FCHEA Treasurer of the Board of Directors, FCS&E Engineering Manager, Technology Development & Integration, IdaTech Outline 1. Critical Factors * Fuel Purity * Fuel Cost 2. Natural Gas - The Wild Card & Competition 3. IdaTech's Experience Implementing Biofuel Critical Factor - Fuel Purity All fuel cell system OEMs have fuel purity specifications * Independent of * Raw materials or feed stocks * Manufacturing process * Depends on * Fuel processor technology * Fuel cell technology - low temp PEM versus SOFC

170

FAQS Qualification Card - Industrial Hygiene | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FAQS Qualification Card - Industrial Hygiene FAQS Qualification Card - Industrial Hygiene FAQS Qualification Card - Industrial Hygiene A key element for the Department's Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA). For each functional area, the FAQS identify the minimum technical competencies and supporting knowledge and skills for a typical qualified individual working in the area. FAQC-IndustrialHygiene.docx Description Industrial Hygiene Qualification Card More Documents & Publications FAQS Gap Analysis Qualification Card - Industrial Hygiene

171

Property:Notes | Open Energy Information  

Open Energy Info (EERE)

Notes Notes Jump to: navigation, search Property Name Notes Property Type Text Pages using the property "Notes" Showing 25 pages using this property. (previous 25) (next 25) 2 2-M Probe At Alum Area (Kratt, Et Al., 2010) + More than 100 new 2m measurements at Astor Pass, Nevada resolved additional details of near-surface thermal outflow in this blind geothermal system 2-M Probe At Astor Pass Area (Kratt, Et Al., 2010) + More than 100 new 2m measurements at Astor Pass, Nevada resolved additional details of near-surface thermal outflow in this blind geothermal system 2-M Probe At Columbus Salt Marsh Area (Kratt, Et Al., 2010) + At Columbus Salt Marsh, Nevada, additional 2m measurements better defined the shape of a blind, shallow thermal anomaly; also at this location deeper temperature measurements were used to develop a near-surface temperature gradient.

172

221B Lecture Notes Relativistic Quantum Mechanics  

E-Print Network (OSTI)

221B Lecture Notes Relativistic Quantum Mechanics 1 Need for Relativistic Quantum Mechanics We, similarly to the Newton's equation of motion in mechanics. The initial condtions to solve the Newton

Murayama, Hitoshi

173

221B Lecture Notes Relativistic Quantum Mechanics  

E-Print Network (OSTI)

221B Lecture Notes Relativistic Quantum Mechanics 1 Need for Relativistic Quantum Mechanics We's equation of motion in mechanics. The initial condtions to solve the Newton's equation of motion

Murayama, Hitoshi

174

2009 Environmental Sustainability Network Conference Call Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes 1. 450.1A Guidance Update - Jane Powers (HS-22), (202) 586-7301, Jane.Powers@hq.doe.gov The Directives Review Board placed the four proposed guidance documents related to...

175

1998 Update --- Notes in the Particle Listings  

NLE Websites -- All DOE Office Websites (Extended Search)

the Reviews, Tables, and Plots and in the Particle Listings Notes in the Gauge and Higgs Boson Listings PostScript PDF (3 pages) The Mass of the W Boson PostScript PDF (12 pages)...

176

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Acquisition Acquisition Description/ Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference/ Industry Meetings Draft- Solicitation Synopsis Solicitation Receipt of Proposal Anticipated Evaluations Complete/Award Paducah GDP http://www.emcbc.doe.g ov/pgdp%20deactivatio n/ EMCBC Multiple award IDIQ contract holders Cost Plus Award Fee with Fixed Price clins $600M- $680M 5/1/2013 5/29/2013 N/A 8/9/2013 Jul-Sep 2013 Oct-Dec 2014 ETEC EMCBC Small Business Firm-Fixed Price & Fixed Unit Rate Price CLINS $25M-$40M 9/19/2013 Jul-Sep 2013 Oct-Dec 2013 Oct-Dec 2013 Jan-Mar 2014 Jul-Sep 2014 Lab Services EMCBC Small Business Fixed Price $40M-$60M Jan-Mar 2014 Jan-Mar 2014 Jan-Mar 2014 Apr-Jun 2014 Apr-Jun 2014 Jan-Mar 2015

177

Fluoride Control in the Aluminum Industry: 100 Years of Technology  

Science Conference Proceedings (OSTI)

Jan 1, 2007 ... TMS Member price: 10.00. Non-member price: 25.00. TMS Student Member price : 10.00. Product In Stock. Description The aluminum industry ...

178

Lube Notes Compilation, 1989-2001  

Science Conference Proceedings (OSTI)

Much of the equipment installed in nuclear and fossil power plants relies on proper lubrication for trouble-free operation. EPRI's Nuclear Maintenance Applications Center (NMAC) began publishing the "Lube Notes" newsletter in 1989 to assist maintenance personnel in addressing plant lubrication issues. Each issue provides guidance on lubricant selection, application, and testing in specific plant applications. This report compiles all of the "Lube Notes" published from 1989 through 2001. A subject index i...

2002-05-01T23:59:59.000Z

179

Office of Industrial Technologies: Industry partnerships  

SciTech Connect

US industries are making progress in turning the vision of the future into reality: More effective competition in global markets, increased industrial efficiency, more jobs, reduced waste generation and greenhouse gas emissions (to 1990 levels), improved environment. DOE`s Office of Industrial Technologies is catalyzing and supporting industry progress in many ways. This pamphlet gives an overview of OIT.

1995-04-01T23:59:59.000Z

180

NERSC Users Group Meeting February 22, 2001 Notes for Greenbook...  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes Notes for Greenbook Process W. Kramer's Flip Charts - Input from the attendees on the Greenbook NUG Meeting February 22-23, 2001 The following are notes transcribed from the...

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

PSM Explanatory Notes - Energy Information Administration  

U.S. Energy Information Administration (EIA)

B. Monthly Supply Survey Description and Methodology ... A. General Discussion ... facilities that have less than 50,000 barrels of storage capacity and,

182

COURSE NOTES: From Nano to Macro  

Science Conference Proceedings (OSTI)

Nov 26, 2007 ... Course Description: This course is offered during the Independent Activities Period (IAP), which is a special 4-week term at MIT that runs from ...

183

Orion Bus Industries | Open Energy Information  

Open Energy Info (EERE)

Bus Industries Bus Industries Jump to: navigation, search Name Orion Bus Industries Place Ontario, Canada Information About Partnership with NREL Partnership with NREL Yes Partnership Type Other Relationship Partnering Center within NREL Transportation Technologies and Systems Partnership Year 2001 Link to project description http://www.nrel.gov/news/press/2002/3002_hybird_buses.html LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Orion Bus Industries is a company located in Ontario, Canada. References Retrieved from "http://en.openei.org/w/index.php?title=Orion_Bus_Industries&oldid=381704" Categories: Clean Energy Organizations Companies Organizations What links here Related changes Special pages Printable version Permanent link Browse properties

184

Description  

E-Print Network (OSTI)

When incorrect prices are determined in the market, the IMO can replace the incorrect prices with administered prices in accordance with the Market Rules within two business days. Suppliers and consumers that respond to high prices that are later determined to be incorrect and replaced by lower administered prices lose significant production and income and become hesitant to respond to price signals otherwise provided. To increase their confidence in the price signals, they market participants would like to be compensated for losses in the event that prices are corrected/administered and they would like to be notified of potential price corrections as close to real-time as possible. Non-market participants who independently respond to pricing signals in the market may also suffer from a loss of production and income as a result of incorrectly posted prices. However, the issues related to non-market participants will not be included in this particular discussion. Background The current Market Rules allow for the IMO to administer price when the market

unknown authors

2004-01-01T23:59:59.000Z

185

Description  

E-Print Network (OSTI)

When incorrect prices are determined in the market, the IMO can replace the incorrect prices with administered prices in accordance with the Market Rules within two business days. Suppliers and consumers that respond to high prices that are later determined to be incorrect and replaced by lower administered prices may lose significant production and income and subsequently become hesitant to respond to price signals otherwise provided. To increase their confidence in the price signals, they market participants would like to be compensated for losses in the event that prices are corrected/administered and they would like to be notified of potential price corrections as close to real-time as possible. Non-market participants who independently respond to pricing signals in the market may also suffer from a loss of production and income as a result of incorrectly posted prices. However, the issues related to non-market participants will not be included inunder this particular discussionissue. Background The current Market Rules allow for the IMO to administer price when the market pricing mechanisms are not functioning normally (Chapter 7, Section 8,4). More specifically, the IMO will administer prices under in the following three situations: • Failure to publish prices due to a forced or planned outage to the hardware, software or communications systems that support the dispatch algorithm • The published prices are incorrect due to incorrect inputs to the dispatch algorithm • Market suspension There have been a number of occasions when prices have been administered, such as during the market suspension resulting from the August 2003 blackout or, more typically, on occasions when market related systems fail or are on outage. Often price is administered automatically before incorrect prices can be published, but at times the incorrect prices cannot and are not detected before being published and must be changed after the fact.

unknown authors

2004-01-01T23:59:59.000Z

186

Description  

E-Print Network (OSTI)

A handbook for executives and non-executives in healthcare organisations February 2006DH INFORMATION READER BOX Policy HR / Workforce

unknown authors

2006-01-01T23:59:59.000Z

187

Commercial and Industrial Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial and Industrial Rebate Program Commercial and Industrial Rebate Program Commercial and Industrial Rebate Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Tribal Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Maximum Rebate $1000/kW Program Info Funding Source Connecticut Ratepayers Federally-Mandated Congestion Charges State Connecticut Program Type State Rebate Program Rebate Amount Up to 100% of project cost Provider Ameresco Note: Contact the program administrator before making investment decisions; this program requires pre-approval. Connecticut electricity customers that install energy efficiency equipment

188

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Description of Building Types Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

189

Notices Description: Entergy Services, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19 Federal Register 19 Federal Register / Vol. 76, No. 139 / Wednesday, July 20, 2011 / Notices Description: Entergy Services, Inc. Response to May 13, 2011 Deficiency Letter. Filed Date: 07/12/2011. Accession Number: 20110712-5164. Comment Date: 5 p.m. Eastern Time on Tuesday, August 02, 2011. Docket Numbers: ER11-2206-001. Applicants: Alta Wind V, LLC. Description: Alta Wind V, LLC, Notice of Non-Material Change in Status. Filed Date: 07/13/2011. Accession Number: 20110713-5091. Comment Date: 5 p.m. Eastern Time on Wednesday, August 03, 2011. Docket Numbers: ER11-3727-001. Applicants: El Segundo Energy Center LLC. Description: El Segundo Energy Center LLC submits tariff filing per 35.17(b): Supplement to Application for Market-Based Rate Authority to be effective 8/5/2011.

190

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

J.F. Beesley

2005-04-21T23:59:59.000Z

191

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas > Natural Gas Information Query System > Definitions, Sources, & Notes Natural Gas > Natural Gas Information Query System > Definitions, Sources, & Notes Definitions, Sources, and Explanatory Notes The EIA-176 form contains responses submitted from an identified universe of pipelines, local distribution companies, and operators of fields, wells or gas processing plants, who distribute gas to end users or transport gas across State borders; or underground natural gas storage operators. Definitions Key Terms Definition Commercial Consumption Gas used by nonmanufacturing establishments or agencies primarily engaged in the sale of goods or services. Included are such establishments as hotels, restaurants, wholesale and retail stores and other service enterprises; gas used by local, State, and Federal agencies engaged in nonmanufacturing activities.

192

ConsumTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Note: Note: The conversion factor for asphalt is 5.5 barrels per short ton. ASTM: American Society for Testing and Materials Aviation Gasoline (Finished): A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifi- cations are provided in ASTM Specification D 910 and Military Specifica- tion MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Aviation Gasoline Blending Components: Naphthas that will be used for blending or compounding into finished aviation gasoline (e.g., straight run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes ox- ygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are re- ported as other hydrocarbons, hydrogen, and oxygenates. Barrel

193

NETL: NewsRoom - LabNotes  

NLE Websites -- All DOE Office Websites (Extended Search)

LabNotes LabNotes NewsRoom LabNotes January 2014 Chemical Looping 101: The Basics NETL's Chemical Looping Research Facilities Oxygen Carriers in Chemical Looping Combustion Chemical Looping Modeling and Simulation Research at NETL December 2013 Foamed Cement Can Seal Tricky Oil and Gas Wells November 2013 High-Performance Rechargeable Batteries May Help Keep the Lights On Rocks Demystified in Geomechanical Properties Lab October 2013 NETL's Morgantown Supercomputer Sets a High Bar for Energy Efficiency September 2013 NETL's Energy Data Exchange (EDX): Providing Access to Quality Energy Data Sorbents Capturing CO2 Will Make Power Plants Cleaner August 2013 Collaborative Technology Demonstrates Potential in Diabetes Testing Quantifying Uncertainty in Computer Model Predictions

194

Studies of a small PWR for onsite industrial power  

SciTech Connect

Information on the use of a 300 to 400 MW(t) PWR type reactor for industrial applications is presented concerning the potential market, reliability considerations, reactor plant description, construction techniques, comparison between nuclear and fossil-fired process steam costs, alternative fossil-fired steam supplies, and industrial application.

Klepper, O.H.; Smith, W.R.

1977-04-19T23:59:59.000Z

195

Science Accelerator Resource Descriptions, Office of Scientific...  

NLE Websites -- All DOE Office Websites (Extended Search)

Resource Descriptions Below you will find descriptions of each of the scientific and technical resources searchable in the Science Accelerator. DOE Data Explorer Locate collections...

196

Microscopic Description of Induced Fission  

E-Print Network (OSTI)

Selected aspects of the description of neutron-induced fission in 240Pu in the framework of the nuclear energy density functional theory at finite temperature are presented. In particular, we discuss aspects pertaining to the choice of thermodynamic state variables, the evolution of fission barriers as function of the incident neutron energy, and the temperatures of the fission fragments.

N. Schunck

2013-02-22T23:59:59.000Z

197

NETL: LabNotes -March 2013  

NLE Websites -- All DOE Office Websites (Extended Search)

Transfer Dynamics in Photocatalytic CO2 Conversion Coal is the workhorse of our power industry, responsible for approximately half of the electricity consumed by Americans....

198

Table Definitions, Sources, and Explanatory Notes  

U.S. Energy Information Administration (EIA)

City Gate, Residential, Industrial Prices: Form EIA-857, "Monthly Report of Natural Gas Purchases and Deliveries to Consumers"; Form EIA-910, "Monthly ...

199

Nukes (notes on PFFP) Chain reactions  

E-Print Network (OSTI)

corresponds to 300 million kg of TNT = 300 ktons Energetics But the Hiroshima bomb (10 kg) only release 20 Clouds" Nagasaki Atomic Bomb 1945 Volcanic Eruption (Mount Redoubt) Not characteristic of nuclear bombs weapons and nuclear power reactors. #12;Chain reactions in nuclear fission bomb Note the number

Browder, Tom

200

EndNote Web Brief Guide  

E-Print Network (OSTI)

EndNote Web Brief Guide Victoria T. Kok Head, Veterinary Medical Library Virginia Polytechnic Institute & State University February 2010 #12;CREATING AN ENDNOTE WEB ACCOUNT Through Web-of-Knowledge: · GototheLibraryHomepagehttp://www.lib.vt.eduandlocatetheWebofKnowledge database. · ClickonMyEndnoteWeb

Wynne, Randolph H.

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

A Note on Supersymmetric Chiral Bosons  

E-Print Network (OSTI)

In this note we extend the Pasti-Sorokin-Tonin formalism for chiral bosons in two dimensions to $N=(1,1)$ and $N=(2,2)$ superspace. In the latter case the formalism is developed for chiral, twisted chiral and semi-chiral superfields.

Alexander Sevrin; Daniel C. Thompson

2013-05-21T23:59:59.000Z

202

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

| Industrial Program Coordinator | Publications Courtesy of The New York Times, Noah Berger The overall goal of the plan to enhance the NSLS facility's Industrial Users'...

203

Uranium industry annual 1997  

SciTech Connect

This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

NONE

1998-04-01T23:59:59.000Z

204

Construction Industry Institute  

Science Conference Proceedings (OSTI)

... in one of our country's most vital industries. ... An industry-led program to disseminate practical ... fire-proofing materials, connections, and steel trusses; ...

2010-10-05T23:59:59.000Z

205

Text REtrieval Conference (TREC) System Description  

Science Conference Proceedings (OSTI)

Text REtrieval Conference (TREC) System Description. Organization Name: Los Alamos National Laboratory, Run ID: lanl981. ...

206

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Demand Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Demand Module calculates energy consumption for the four Census Regions (see Figure 5) and disaggregates the energy consumption

207

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Module calculates

208

Industrial Applications of Renewable Resources  

Science Conference Proceedings (OSTI)

Archive of Industrial Applications of Renewable Resources Industrial Applications of Renewable Resources Cincinnati, Ohio, USA Industrial Applications of Renewable Resources ...

209

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy Consumption Survey (CBECS) > Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 and 2003 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

210

Quality Assurance Requirements and Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QjCivilianRadioactive QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160 Successful implementation of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance (QA) program is essential for the OCRWM to carry out its mission. Our mission is to manage and dispose ofbigh-Ievel radioactive waste and spent nuclear fuel in a manner that protects health, safety, and the environment; enhances national and energy security; and merits

211

Natural Gas Industrial Price  

U.S. Energy Information Administration (EIA) Indexed Site

Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area 2007 2008 2009 2010 2011 2012 View History U.S. 7.68 9.65 5.33 5.49 5.11 3.86...

212

Position Description Fox Valley Forge  

E-Print Network (OSTI)

. · Estimate costs and submit bids for engineering · Study industrial processes to determine where and how of equipment, components and systems. · Develop and test models of alternate designs and processing methods design proposals, specifications, manuals, and other data to evaluate the feasibility, cost

Heller, Barbara

213

Print - Industrial Partnerships Office  

... there is an increased need for new engine technologies which can increase fuel efficiency and meet strict pollution standards. Description ...

214

Climate VISION: Industry Associations  

Office of Scientific and Technical Information (OSTI)

Industry Associations Industry Associations Aluminum Aluminum Association (Coordinating aluminum industry Climate VISION activities) The Aluminum Association, Inc. is the trade association for producers of primary aluminum, recyclers and semi-fabricated aluminum products, as well as suppliers to the industry. The Association provides leadership to the industry through its programs and services which aim to enhance aluminum's position in a world of proliferating materials, increase its use as the "material of choice," remove impediments to its fullest use, and assist in achieving the industry's environmental, societal, and economic objectives. Automobile Manufacturers Alliance of Automobile Manufacturers (Coordinating automobile industry Climate VISION activities) The Alliance of Automobile Manufacturers, Inc. is a trade association

215

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Number of Consumers Number of Consumers Definitions Key Terms Definition Commercial Consumption Gas used by nonmanufacturing establishments or agencies primarily engaged in the sale of goods or services. Included are such establishments as hotels, restaurants, wholesale and retail stores and other service enterprises; gas used by local, State, and Federal agencies engaged in nonmanufacturing activities. Industrial Consumption Natural gas used for heat, power, or chemical feedstock by manufacturing establishments or those engaged in mining or other mineral extraction as well as consumers in agriculture, forestry, and fisheries. Also included in industrial consumption are generators that produce electricity and/or useful thermal output primarily to support the above-mentioned industrial activities.

216

Linear Collider Collaboration Tech Notes LCC-0109  

NLE Websites -- All DOE Office Websites (Extended Search)

9 9 TESLA 2002-11 CBP Tech Note-269 November 2002 Alignment Stability Models for Damping Rings Andrej Wolski Lawrence Berkeley National Laboratory University of California Berkeley, CA Winfried Decking Deutsches Elektron Synchrotron (DESY) Hamburg, Germany Abstract: Linear collider damping rings are highly sensitive to magnet alignment. Emittance tuning simulations for current designs of damping rings for TESLA and NLC have given encouraging results, but depend on invasive measurements of dispersion. The frequency with which such measurements must be made is therefore an operational issue, and depends on the time stability of the alignment. In this note, we consider three effects that lead to misalignment and the need to retune the damping ring: (1)

217

Linear Collider Collaboration Tech Notes LCC-0063  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 May 2001 Varying alpha/lambda in NLC Structures - BNS Damping and Emittance Growth G. Stupakov and Z. Li Stanford Linear Accelerator Center Stanford, CA Abstract: In this note we consider the effect of varying this iris opening in the NLC structures on the beam dynamics and the rf efficiency in the linac. Varying a/λ in NLC structures - BNS damping and emittance growth G. Stupakov and Z. Li SLAC, Stanford University, Stanford, CA 94309 In this note we consider the effect of the varying the iris opening a in the NLC structures on the beam dynamics and the RF efficiency in the linac. The most important consequence of the variation of the iris openings is the change of the longitudinal and transverse wakefields. Wake as a function of parameter a for the NLC structures has been previously calculated by K. Bane. Here we will use his

218

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Retail Gasoline and Diesel Surveys Retail Gasoline and Diesel Surveys Definitions Key Terms Definition Conventional Area Any area that does not require the sale of reformulated gasoline. All types of finished motor gasoline may be sold in this area. Conventional Gasoline Finished motor gasoline not included in the reformulated gasoline category. Excludes reformulated gasoline blendstock for oxygenate blending (RBOB) as well as other blendstock. Note: this survey designates all motor gasoline collected within a conventional area as conventional gasoline (see conventional area). Gasoline Grades The classification of gasoline by octane ratings. Each type of gasoline (conventional and reformulated) is classified by three grades - regular, midgrade, and premium. Note: gasoline sales are reported by grade in accordance with their classification at the time of sale. In general, automotive octane requirements are lower at high altitudes. Therefore, in some areas of the United States, such as the Rocky Mountain States, the octane ratings for the gasoline grades may be 2 or more octane points lower.

219

A Note on Search Trees Jianer Chen  

E-Print Network (OSTI)

in (0, ) such that f(r) = 0 for r (0, ) implies that f (r) > 0. Suppose further that f is continuous than one root in (0, ). Let r1 and r2, with r1 r2, be two consecutive such roots (note that we can always find two consecutive roots r1 and r2 because f (r) > 0 for any root r). From the hypothesis, we

Schaefer, Marcus

220

EART 265 Lecture Notes: Energy Energy Usage  

E-Print Network (OSTI)

EART 265 Lecture Notes: Energy Energy Usage US per capita energy usage is 10 kW. This represents 1 of 2 kW. Euro- pean countries tend to use less energy per capita by a factor of 2. China's per capita/4 of the worldwide energy usage, and with 1/20th of the world population gives a global average power consumption

Nimmo, Francis

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Retail Settlement Agent: Technical Description  

Science Conference Proceedings (OSTI)

The energy industry is in the process of restructuring itself from an array of vertically integrated, regulated monopolies into competitive supply chains. One of the most significant changes for the energy business infrastructure in this era of disaggregation is the need for settling up between various unbundled entities comprising these energy supply chains. Settlement is a new business process for utilities. Some settlement activities have taken place at the wholesale level; however, these settlements ...

2000-03-29T23:59:59.000Z

222

PriceTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

prices prices are developed for the following three categories: coking coal; steam coal (all noncoking coal); and coal coke imports and exports. Coking coal, used in the industrial sector only, is a high-quality bitumi- nous coal that is used to make coal coke. Steam coal, which may be used by all sectors, includes anthracite, bituminous coal, subbituminous coal, and lignite. In the industrial sector, coal consumption is the sum of cok- ing coal and steam coal. The industrial coal price is the quantity- weighted average price of these two components. Imports and exports of coal coke are available only on the national level and are accounted for in the industrial sector. Coal coke imports and ex- ports are reported separately and are not averaged with other coal prices and expenditures. Coking Coal Coking coal is generally more expensive than steam coal; therefore, it is identified separately

223

ConsumTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Data Data 2011: Consumption 125 A P P E N D I X A ABICB Aviation gasoline blending components Billion Btu ABICBZZ = ABTCBZZ total consumed by the industrial sector. ABICBUS = ABTCBUS ABICP Aviation gasoline blending components Thousand barrels ABICPZZ = ABTCPZZ total consumed by the industrial sector. ABICPUS = ABTCPUS ABTCB Aviation gasoline blending components total Billion Btu ABTCBZZ = ABTCPZZ * 5.048 consumed. ABTCBUS = SABTCBZZ ABTCP Aviation gasoline blending components total Thousand barrels ABTCPZZ = (COCAPZZ / COCAPUS) * ABTCPUS consumed. ABTCPUS is independent. AICAP Aluminum ingot production capacity. Short tons AICAPZZ is independent. AICAPUS = SAICAPZZ ARICB Asphalt and road oil consumed by the Billion Btu ARICBZZ = ARICPZZ * 6.636 industrial sector. ARICBUS = SARICBZZ ARICP Asphalt and road oil consumed by the Thousand barrels ARICPZZ = ASICPZZ + RDICPZZ industrial

224

ConsumTechNotes2012.vp  

Gasoline and Diesel Fuel Update (EIA)

Data: Data: Consumption 125 A P P E N D I X A ABICB Aviation gasoline blending components Billion Btu ABICBZZ = ABTCBZZ total consumed by the industrial sector. ABICBUS = ABTCBUS ABICP Aviation gasoline blending components Thousand barrels ABICPZZ = ABTCPZZ total consumed by the industrial sector. ABICPUS = ABTCPUS ABTCB Aviation gasoline blending components total Billion Btu ABTCBZZ = ABTCPZZ * 5.048 consumed. ABTCBUS = SABTCBZZ ABTCP Aviation gasoline blending components total Thousand barrels ABTCPZZ = (COCAPZZ / COCAPUS) * ABTCPUS consumed. ABTCPUS is independent. AICAP Aluminum ingot production capacity. Short tons AICAPZZ is independent. AICAPUS = SAICAPZZ ARICB Asphalt and road oil consumed by the Billion Btu ARICBZZ = ARICPZZ * 6.636 industrial sector. ARICBUS = SARICBZZ ARICP Asphalt and road oil consumed by the Thousand barrels ARICPZZ = ASICPZZ + RDICPZZ industrial sector.

225

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

M. Maniyar

2004-06-22T23:59:59.000Z

226

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

227

SNF AGING SYSTEM DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

L.L. Swanson

2005-04-06T23:59:59.000Z

228

Ontario's Industrial Energy Services Program  

E-Print Network (OSTI)

The Ontario Ministry of Energy began offering its new Industrial Energy Services Program (IESP) in early 1987. This 3-year, $5-million program, while not new in concept, is thought to be unique for its depth of service and method of delivery. It provides Ontario's manufacturers with advice and funding assistance for the identification and definition of industrial energy efficiency opportunities. The first phase provides for a free comprehensive site energy audit/analysis, conducted over one to five days, by teams of private sector consultants, selected to match expertise with manufacturer's needs. The emphasis is on process and equipment improvements, but site services and buildings are also examined. The final report includes detailed descriptions of major opportunities, along with estimated costs, savings, and paybacks. The next phases provide for sharing the detailed feasibility study costs and project engineering costs for those energy projects that move to implementation. In this paper, the author briefly describes the novel administrative structure of the program, presents the results of the activities to date, and describes, in some detail, several case studies from different industrial sectors.

Ploeger, L. K.

1987-09-01T23:59:59.000Z

229

Content of System Design Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-3024-2011 August 2011 ________________________ Superseding DOE-STD-3024-98 DOE STANDARD CONTENT OF SYSTEM DESIGN DESCRIPTIONS U.S. Department of Energy AREA EDCO Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-3024-2011 ii Available on the Department of Energy Technical Standards web page at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-3024-2011 iii CONTENTS PAGE Foreword ..................................................................................................................................................... iv 1. PURPOSE ............................................................................................................................................1

230

Descriptive Model of Generic WAMS  

Science Conference Proceedings (OSTI)

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

231

GAO report sabotages LPG industry  

SciTech Connect

A massive report by the U.S. General Accounting Office (GAO) on the liquefied energy gases (LEG), which include LPG and LNG, covers the possible hazards and recommends that facilities either be located in rural areas or, if in urban areas, be operated according to nuclear plant standards. One section concerns the ability of storage tanks to withstand earthquakes, floods, winds, and tornadoes. Another section treats transportation recommendations to eliminate as far as possible all opportunities for injury or destruction due to tank car or tank truck accidents. A discussion of the GAO report, only a portion of which has been released, sees the far-ranging recommendations as a threat to the LPG industry; notes that a great deal of information pertinent to the industry is presented in pointing out the problems, but finds that the GAO seems to have encountered considerable difficulty in finding practical solutions to the problems, e.g., in finding suitable sites for LPG terminals so that all such terminals can be in non-urban areas by 1980.

Roberts, B.

1978-03-01T23:59:59.000Z

232

Promoting Energy Efficiency in Industry: Utility Roles and Perspectives  

E-Print Network (OSTI)

This paper identifies the factors that influence industrial firms' decisions to invest in energy efficiency and notes how the emerging wave of electric utility 'demand-side' planning and marketing can help industry control costs of production and also improve utility operations. The external and internal influences on electric utility demand-side management are identified, along with typical objectives of utility marketing programs. The concept of 'strategic marketing' is also introduced. Finally, a summary of selected electric utility experiences with industrial programs is provided, along with emerging trends in utility marketing.

Limaye, D. R.; Davis, T. D.

1984-01-01T23:59:59.000Z

233

Linear Collider Collaboration Tech Notes LCC-0099  

NLE Websites -- All DOE Office Websites (Extended Search)

099 099 August 2002 Space Charge Dynamics of Bright Electron Beams Alexander W. Chao, Rainer Pitthan, Toshiki Tajima, Dian Yeremian Stanford Linear Accelerator Center Stanford University Abstract: The longitudinal dynamics and its coupling with the transverse dynamics of bunched beams with strong space charge are analyzed. We introduce a self-consistent Vlasov description for the longitudinal phase space similar to the familiar description for the transverse phase space using a Kapchinskij-Vladimirskij (K-V) distribution [1]. A longitudinal beam envelope equation is derived. An exact solution is then obtained when coupling to the transverse dynamics is ignored. This longitudinal envelope equation is coupled to the transverse envelope

234

Industrial Decision Making  

E-Print Network (OSTI)

Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy although, freight costs, favorable exchange rates and high capacity utilization will encourage future industrial investment. Industry will eventually enter a new period of major investment. Future industrial investment will be an opportunity to influence the energy efficiency of these facilities for generations to come. Program managers must begin engaging industrial customers now, in order to exploit this unprecedented opportunity to change future energy use patterns. This paper reviews recent market trends and industrial investment decision-making. The paper will also address several important questions: • Why has industrial investment declined? • What is the outlook for industrial investment? • How can programs engage industry for future opportunities?

Elliott, R. N.; McKinney, V.; Shipley, A.

2008-01-01T23:59:59.000Z

235

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS 27 data.

236

An introduction to electric industry restructuring  

SciTech Connect

This paper briefly describes the electric industry, its residential markets, industry structure and current trends. Its purpose is to provide Weatherization grants managers with the background necessary to assess their leveraging opportunities in an industry that is experiencing sweeping changes, commonly known as electric industry restructuring. The study describes the terrain of a changing industry topography on a national and regional basis, with some state and local information also provided. Weatherization managers and subgrantees who read this paper should be better able to understand the leveraging opportunities that are emerging now in the electricity market place. The reader will be introduced to the basics of the electric industry as it presently operates, the nature of the changes that are in the process of occurring, and the driving forces that are behind those changes. The major industry players are described by type and their interests are explored in further depth. There will also be an overview of the regulatory process as it has operated historically, as well as the changes now underway at both the state and federal levels. Finally, the paper will conclude with a description of some of the assets and opportunities available to those who may be interested in participating in the restructuring process in order to expand or protect low-income programs in their own states.

Eisenberg, J.F.; Berry, L.G.

1997-09-01T23:59:59.000Z

237

ConSol (Building Industry Research Alliance) | Open Energy Information  

Open Energy Info (EERE)

ConSol (Building Industry Research Alliance) ConSol (Building Industry Research Alliance) Jump to: navigation, search Name ConSol (Building Industry Research Alliance) Place Stockton, CA Website http://www.consol.com References ConSol (Building Industry Research Alliance)[1] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Incubator Partnering Center within NREL Electricity Resources & Building Systems Integration Partnership Year 2004 Link to project description http://www.nrel.gov/news/press/2004/382.html LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! ConSol (Building Industry Research Alliance) is a company located in Stockton, CA. References ↑ "ConSol (Building Industry Research Alliance)" Retrieved from "http://en.openei.org/w/index.php?title=ConSol_(Building_Industry_Research_Alliance)&oldid=379316

238

The Nuclear Fuel Industry Research Program Overview  

Science Conference Proceedings (OSTI)

This overview introduces the Nuclear Fuel Industry (NFIR) program to member utilities while also serving as a research status update for program participants. It includes detailed descriptions of various projects, relating both the technical backgrounds and the overall scope of work. NFIR program activities are geared toward providing long-term benefits to utilities and vendors by ensuring the safe and reliable use of core materials and components. Specific information can be obtained from published tech...

1994-08-23T23:59:59.000Z

239

V-211: IBM iNotes Multiple Vulnerabilities  

Energy.gov (U.S. Department of Energy (DOE))

IBM iNotes has two cross-site scripting vulnerabilities and an ActiveX Integer overflow vulnerability

240

Industrial Permits Branch  

E-Print Network (OSTI)

Disclaimer: Please note that this version of the document has been converted from hard copy to an electronic file in PDF format. Therefore, this document may not match exactly the format of hard

unknown authors

1977-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Number: 1 Description: What powers did ...  

Science Conference Proceedings (OSTI)

... top> Number: 10 Description: What is one of the major problems with electronic producing turbines (windmills) in California? ...

2002-11-04T23:59:59.000Z

242

Number: 1 Description: How did the ...  

Science Conference Proceedings (OSTI)

... Number: 80 Description: What part did ITT (International Telephone and Telegraph) and Anaconda Copper play in the ...

2003-03-03T23:59:59.000Z

243

Expressive fuzzy description logics over lattices  

Science Conference Proceedings (OSTI)

It is generally accepted that the management of imprecision and vagueness will yield more intelligent and realistic knowledge-based applications. In this paper we present a fuzzy description logics framework based on certainty lattices. Our main feature ... Keywords: Certainty lattices, Description logics, Fuzzy description logics, Inverse roles, Role hierarchies, Transitive roles

Yuncheng Jiang; Yong Tang; Ju Wang; Peimin Deng; Suqin Tang

2010-03-01T23:59:59.000Z

244

Microsoft Word - 564M_Biomass_Project Descriptions FINAL 120409  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grant Grant Amount Non-Fed Amount Project Location (City) Project Location (State) Description 1) Pilot and Demonstration Scale FOA - Pilot Scale Algenol Biofuels Inc. $25,000,000 $33,915,478 Freeport TX This project will make ethanol directly from carbon dioxide and seawater using algae. The facility will have the capacity to produce 100,000 gallons of fuel- grade ethanol per year. American Process Inc. $17,944,902 $10,148,508 Alpena MI This project will produce fuel and potassium acetate, a compound with many industrial applications, using processed wood generated by Decorative Panels International, an existing hardboard manufacturing facility in Alpena. The pilot plant will

245

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Title, Location Title, Location Estimated Cost Description Determination Date: 2010 LCLS Undulator 2 is envisioned to be a 0.2 - 2keV FEL x-ray source, capable of delivering x-rays to End Station A (ESA), located in the existing Research Yard at SLAC. It will also be configurable as a non- FEL hard x-ray source capable of delivering a chirped x-ray pulse for single-shot broad-spectrum measurements. The project would entail reconstruction of the electron beam transport to End Station A, construction and installation of a new undulator in the tunnel upstream of ESA and beam dump, and construction and installation of x-ray transport, optics, and diagnostics in ESA. It also includes the construction of an annex to End Station A , providing hutches for experiment stations.

246

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

247

Industrial | Open Energy Information  

Open Energy Info (EERE)

to: navigation, search Click to return to AEO2011 page AEO2011 Data From AEO2011 report . Market Trends Despite a 54-percent increase in industrial shipments, industrial energy...

248

Linear Collider Collaboration Tech Notes LCC-0108  

NLE Websites -- All DOE Office Websites (Extended Search)

8 8 TESLA 2002-10 CBP Tech Note-268 November 2002 Comparison of Emittance Tuning Simulations in the NLC and TESLA Damping Rings Andrej Wolski Lawrence Berkeley National Laboratory University of California Berkeley, CA Winfried Decking Deutsches Elektron Synchrotron (DESY) Hamburg, Germany Abstract: Vertical emittance is a critical issue for future linear collider damping rings. Both NLC and TESLA specify vertical emittance of the order of a few picometers, below values currently achieved in any storage ring. Simulations show that algorithms based on correcting the closed orbit and the vertical dispersion can be effective in reducing the vertical emittance to the required levels, in the presence of a limited subset of

249

Linear Collider Collaboration Tech Notes LCC-0104  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 October 2002 Beamstrahlung Photon Load on the TESLA Extraction Septum Blade Andrei Seryi Stanford Linear Accelerator Center Stanford, CA 94309, USA Abstract: This note describes work performed in the framework of the International Linear Collider Technical Review Committee [1] to estimate the power load on the TESLA extraction septum blade due to beamstrahlung photons. It is shown, that under realistic conditions the photon load can be several orders of magnitude higher than what was estimated in the TESLA TDR [2] for the ideal Gaussian beams, potentially representing a serious limitation of the current design. Beamstrahlung Photon Load on the TESLA Extraction Septum Blade ANDREI SERYI STANFORD LINEAR

250

Note on tachyon moduli and closed strings  

SciTech Connect

The collective behavior of the SL(2,R) covariant brane states of noncritical c=1 string theory, found in a previous work, is studied in the Fermi liquid approximation. It is found that such states mimic the coset WZW model, whereas only by further restrictions one recovers the double-scaling limit which was purported to be equivalent to closed string models. Another limit is proposed, inspired by the tachyon condensation ideas, where the spectrum is the same of two-dimensional string theory. We close by noting some strange connections between vacuum states of the theory in their different interpretations.

Carneiro da Cunha, Bruno [Helsinki Institute of Physics, P.O. Box 64, FIN-00014 University of Helsinki (Finland) and Departamento de Fisica, Universidade Federal de Pernambuco, CEP 53901-970, Recife, Pernambuco (Brazil)

2008-07-15T23:59:59.000Z

251

ESC/Java2 Implementation Notes  

E-Print Network (OSTI)

Abstract: ESC/Java2 is a tool for statically checking program specifications. It expands significantly upon ESC/Java, on which it is built. It is consistent with the definition of JML and of Java 1.4. It adds additional static checking to that in ESC/Java; most significantly, it adds support for checking frame conditions and annotations containing method calls. This document describes the status of the final release of ESC/Java2, along with some notes regarding the details of that implementation.

David R. Cok; Joseph R. Kiniry; Dermot Cochran

2008-01-01T23:59:59.000Z

252

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Consumption Consumption Topic: Delivered for the Account of Others Definitions Key Terms Definition Commercial Consumption Gas used by nonmanufacturing establishments or agencies primarily engaged in the sale of goods or services. Included are such establishments as hotels, restaurants, wholesale and retail stores and other service enterprises; gas used by local, State, and Federal agencies engaged in nonmanufacturing activities. Delivered for the Account of Others Gas that is not owned by the company that delivers it to the consumer. These deliveries include quantities covered by long-term contracts and gas involved in short-term or spot market sales. Industrial Consumption Natural gas used for heat, power, or chemical feedstock by manufacturing establishments or those engaged in mining or other mineral extraction as well as consumers in agriculture, forestry, and fisheries. Also included in industrial consumption are generators that produce electricity and/or useful thermal output primarily to support the above-mentioned industrial activities.

253

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

State Shares of U.S. Deliveries State Shares of U.S. Deliveries Definitions Key Terms Definition Commercial Consumption Gas used by nonmanufacturing establishments or agencies primarily engaged in the sale of goods or services. Included are such establishments as hotels, restaurants, wholesale and retail stores and other service enterprises; gas used by local, State, and Federal agencies engaged in nonmanufacturing activities. Delivered (Gas) The physical transfer of natural, synthetic, and/or supplemental gas from facilities operated by the responding company to facilities operated by others or to consumers. Electric Power Consumption Gas used as fuel in the electric power sector. Industrial Consumption Natural gas used for heat, power, or chemical feedstock by manufacturing establishments or those engaged in mining or other mineral extraction as well as consumers in agriculture, forestry, and fisheries. Also included in industrial consumption are generators that produce electricity and/or useful thermal output primarily to support the above-mentioned industrial activities.

254

America's Booming Wind Industry  

Energy.gov (U.S. Department of Energy (DOE))

Sharing key findings from two new Energy Department reports that highlight the record growth of America's wind industry.

255

The Copper Industry  

Science Conference Proceedings (OSTI)

...These products are sold to a wide variety of industrial users. Certain mill productsâ??chiefly wire, cable, and most

256

NIST Industry Day 2012  

Science Conference Proceedings (OSTI)

... at www.fedbizopps.gov. Search NIST-AMD-INDUSTRY-DAY-2012 in the Quick Search engine. Deadline for registration ...

2013-08-30T23:59:59.000Z

257

Industrial Development Projects (Montana)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation authorizes municipalities and counties to issue bonds or interest coupons to finance industrial projects, including energy generation facilities.

258

Wyoming geo-notes No. 2  

Science Conference Proceedings (OSTI)

After a general overview of the mineral industry in Wyoming, activities and data are given on petroleum, natural gas, coal, uranium, trona, thorium, and other industrial minerals, metals, and precious stones. Coal production figures by county and basin are given. Maps are included showing regions containing subbituminous, bituminous, lignite, and strippable deposits of coal; major active and inactive uranium deposits; oil, gas, and oil shale deposits and pipeline corridors; and selected mineral occurrences of bentonite, trona, and jade. Production forecasts are given for uranium, trona, oil, gas, and coal. Reserve estimates are given for petroleum, natural gas, coal, trona, uranium, and oil shale. 8 references, 4 figures, 7 tables.

Glass, G.B.

1984-01-01T23:59:59.000Z

259

Wyoming geo-notes No. 3  

Science Conference Proceedings (OSTI)

After a general overview of the mineral industry in Wyoming, activities and data are given on petroleum, natural gas, coal, uranium, trona, and other industrial minerals, metals, and precious stones. Coal production figures by county and basin are given. Data are also given on coal consumption by electric utilities, residential and commercial users and on coal transport by rail, river barge, and truck. Production forecasts are given for uranium, trona, oil, gas, and coal. Reserve estimates are given for petroleum, natural gas, coal, trona, uranium, and oil shale. Publications available from the Geological Survey of Wyoming are listed. 15 references, 6 figures, 8 tables.

Glass, G.B.

1984-01-01T23:59:59.000Z

260

Alert! Industry and Academia - The Energy Department Seeks Your Novel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alert! Industry and Academia - The Energy Department Seeks Your Alert! Industry and Academia - The Energy Department Seeks Your Novel Ideas for Advanced Energy Systems Alert! Industry and Academia - The Energy Department Seeks Your Novel Ideas for Advanced Energy Systems January 7, 2014 - 12:37pm Addthis Alert! Industry and Academia — The Energy Department Seeks Your Novel Ideas for Advanced Energy Systems Do you care about power and our environment? Are you buzzing with innovative ideas? If so, the Energy Department wants to hear your new and creative concepts for improving the cost and performance of power or industrial systems that depend on fossil energy. Please note that this is a request for information (RFI) only; it is NOT a request for proposals. Your response may be used to guide the planned funding opportunity announcement (FOA) that will be issued at a later date

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Alert! Industry and Academia - The Energy Department Seeks Your Novel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alert! Industry and Academia - The Energy Department Seeks Your Alert! Industry and Academia - The Energy Department Seeks Your Novel Ideas for Advanced Energy Systems Alert! Industry and Academia - The Energy Department Seeks Your Novel Ideas for Advanced Energy Systems January 7, 2014 - 12:37pm Addthis Alert! Industry and Academia — The Energy Department Seeks Your Novel Ideas for Advanced Energy Systems Do you care about power and our environment? Are you buzzing with innovative ideas? If so, the Energy Department wants to hear your new and creative concepts for improving the cost and performance of power or industrial systems that depend on fossil energy. Please note that this is a request for information (RFI) only; it is NOT a request for proposals. Your response may be used to guide the planned funding opportunity announcement (FOA) that will be issued at a later date

262

Transforming the Oil Industry into the Energy Industry  

E-Print Network (OSTI)

innovation and lets industry pick winning technologies. TheTransforming the Oil Industry intothe Energy Industry BY DANIEL SPERLING AND SONIA YEH A C C E

Sperling, Daniel; Yeh, Sonia

2009-01-01T23:59:59.000Z

263

From Industry Protection to Industry Promotion: IT Policy in Brazil  

E-Print Network (OSTI)

Brazilian banking automation industry. Science, TechnologyBrazilian liberalisation of the IT industry on technologicalWorking paper. Computer Industry Almanac, Inc. (1999).

Botelho, Antonio Jose Junqueira; Dedrick, Jason; Kraemer, Kenneth L.; Tigre, Paulo Bastos

1999-01-01T23:59:59.000Z

264

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Prime Supplier Sales Volume Prime Supplier Sales Volume Definitions Key Terms Definition Conventional Gasoline Finished motor gasoline not included in the oxygenated or reformulated gasoline categories. Excludes reformulated gasoline blendstock for oxygenate blending (RBOB) as well as other blendstock. Finished Aviation Gasoline A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Gasoline Grades The classification of gasoline by octane ratings. Each type of gasoline (conventional and reformulated) is classified by three grades - regular, midgrade, and premium. Note: gasoline sales are reported by grade in accordance with their classification at the time of sale. In general, automotive octane requirements are lower at high altitudes. Therefore, in some areas of the United States, such as the Rocky Mountain States, the octane ratings for the gasoline grades may be 2 or more octane points lower.

265

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry banner Industry banner Neutron scattering research has applications in practically every field, and neutron research at ORNL is leading to productive partnerships with the industrial and business communities. We welcome proposals for all types of research, including those involving proprietary work. Recent studies have led to discoveries with potential applications in fields such as medicine, energy, and various metals technologies. For more information, please see our recent research highlights. Research Collaborations Industry-Driven Research Benefits Plastics Manufacturing Corning uses VULCAN to test limits of ceramic material for car emission controls, filtration devices Neutrons Probe Inner Workings of Batteries Industry and Neutron Science: Working To Make a Match

266

Industrial Compressed Air System Energy Efficiency Guidebook.  

DOE Green Energy (OSTI)

Energy efficient design, operation and maintenance of compressed air systems in industrial plants can provide substantial reductions in electric power and other operational costs. This guidebook will help identify cost effective, energy efficiency opportunities in compressed air system design, re-design, operation and maintenance. The guidebook provides: (1) a broad overview of industrial compressed air systems, (2) methods for estimating compressed air consumption and projected air savings, (3) a description of applicable, generic energy conservation measures, and, (4) a review of some compressed air system demonstration projects that have taken place over the last two years. The primary audience for this guidebook includes plant maintenance supervisors, plant engineers, plant managers and others interested in energy management of industrial compressed air systems.

United States. Bonneville Power Administration.

1993-12-01T23:59:59.000Z

267

Notes 11. High pressure floating ring seals  

E-Print Network (OSTI)

Floating ring seals for compressors: leakage and force coefficients, seal lock up and effect on rotor stability, recommendations to reduce seal cross-coupled effects. Long oil seals as pressure barriers in industrial mixers: leakage and force coefficients, effect on rotor stability, recommendations for grooved seals with reduced leakage and lesser cross-stiffnesses.

San Andres, Luis

2009-01-01T23:59:59.000Z

268

Uranium industry annual 1998  

SciTech Connect

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

NONE

1999-04-22T23:59:59.000Z

269

Uranium industry annual 1994  

SciTech Connect

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

NONE

1995-07-05T23:59:59.000Z

270

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Print Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

271

Reconciling OntoNotes: unrestricted coreference resolution in OntoNotes with Reconcile  

Science Conference Proceedings (OSTI)

This paper describes our entry to the 2011 CoNLL closed task (Pradhan et al., 2011) on modeling unrestricted coreference in OntoNotes. Our system is based on the Reconcile coreference resolution research platform. Reconcile is a general software infrastructure ...

Veselin Stoyanov; Uday Babbar; Pracheer Gupta; Claire Cardie

2011-06-01T23:59:59.000Z

272

Tobacco Industry Involvement in Colorado  

E-Print Network (OSTI)

Accessed May 25, 2004) Industry Summary. 1992 (est. ).11 May 2004) Tobacco Industry Involvement in Colorado Pageor (800) LUNG-USA. Tobacco Industry Involvement in Colorado

Landman, BA, Anne; Bialick, Peter

2004-01-01T23:59:59.000Z

273

For Industry | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

R&D accelerates battery technology | More news Home | Connect with ORNL | For Industry For Industry | For Industry SHARE There are a few different way of "working" with...

274

Industrial Biomass Energy Consumption and Electricity Net Generation by  

Open Energy Info (EERE)

47 47 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142281847 Varnish cache server Industrial Biomass Energy Consumption and Electricity Net Generation by Industry and Energy Source, 2008 Dataset Summary Description Biomass energy consumption and electricity net generation in the industrial sector by industry and energy source in 2008. This data is published and compiled by the U.S. Energy Information Administration (EIA). Source EIA Date Released August 01st, 2010 (4 years ago) Date Updated August 01st, 2010 (4 years ago) Keywords 2008 biomass consumption industrial sector Data application/vnd.ms-excel icon industrial_biomass_energy_consumption_and_electricity_2008.xls (xls, 27.6 KiB)

275

Industrial Energy Efficiency in Ukraine: The Business Outlook  

E-Print Network (OSTI)

Ukraine is full of profitable opportunities for energy efficiency. Industry accounts for many of these opportunities because of its high level of energy consumption and its ability to pay for energy efficiency measures in hard currency. This paper provides an overview of steps which companies can take to tap into the Ukrainian energy efficiency market, as well as a description of a sample energy efficiency opportunity at a Ukrainian industrial enterprise.

Evans, M.

1996-04-01T23:59:59.000Z

276

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Area of Entry Area of Entry Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

277

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Prices, Sales Volumes & Stocks by State Prices, Sales Volumes & Stocks by State Definitions Key Terms Definition Aviation Gasoline (Finished) A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Gas Plant Operator Any firm, including a gas plant owner, which operates a gas plant and keeps the gas plant records. A gas plant is a facility in which natural gas liquids are separated from natural gas or in which natural gas liquids are fractionated or otherwise separated into natural gas liquid products or both. For the purposes of this survey, gas plant operator data are contained in the refiner categories.

278

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

& Blender Net Production & Blender Net Production Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Barrel A unit of volume equal to 42 U.S. gallons. Blending Plant A facility which has no refining capability but is either capable of producing finished motor gasoline through mechanical blending or blends oxygenates with motor gasoline.

279

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Total Stocks Total Stocks Definitions Key Terms Definition All Other Motor Gasoline Blending Components Naphthas (e.g. straight-run gasoline, alkylate, reformate, benzene, toluene, xylene) used for blending or compounding into finished motor gasoline. Includes receipts and inputs of Gasoline Treated as Blendstock (GTAB). Excludes conventional blendstock for oxygenate blending (CBOB), reformulated blendstock for oxygenate blending, oxygenates (e.g. fuel ethanol and methyl tertiary butyl ether), butane, and pentanes plus. Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton.

280

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Production Capacity of Operable Petroleum Refineries Production Capacity of Operable Petroleum Refineries Definitions Key Terms Definition Alkylate The product of an alkylation reaction. It usually refers to the high octane product from alkylation units. This alkylate is used in blending high octane gasoline. Aromatics Hydrocarbons characterized by unsaturated ring structures of carbon atoms. Commercial petroleum aromatics are benzene, toluene, and xylene (BTX). Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton.

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Stocks by Type Stocks by Type Definitions Key Terms Definition Alaskan in Transit Alaskan crude oil stocks in transit by water between Alaska and the other States, the District of Columbia, Puerto Rico, and the Virgin Islands. Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

282

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

U.S. Imports by Country of Origin U.S. Imports by Country of Origin Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

283

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Refinery Stocks Refinery Stocks Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

284

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Propane (Consumer Grade) Prices by Sales Type Propane (Consumer Grade) Prices by Sales Type Definitions Key Terms Definition Commercial/Institutional An energy-consuming sector that consists of service-providing facilities and equipment of: businesses; Federal, State, and local governments; and other private and public organizations, such as religious, social, or fraternal groups. The commercial sector includes institutional living quarters. It also includes sewage treatment facilities. Common uses of energy associated with this sector include space heating, water heating, air conditioning, lighting, refrigeration, cooking, and running a wide variety of other equipment. Note: This sector includes generators that produce electricity and/or useful thermal output primarily to support the activities of the above-mentioned commercial establishments.

285

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Supply and Disposition Balance Supply and Disposition Balance Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

286

Linear Collider Collaboration Tech Notes LCC-0101  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 August 2002 Collimator Wakefield Calculations for ILC-TRC Report Peter Tenenbaum Stanford Linear Accelerator Center Stanford University Stanford, CA 94309, USA Abstract: We summarize the formalism of collimator wakefields and their effect on beams that are near the center of the collimator gap, and apply the formalism to the TESLA, NLC, and CLIC collimation systems. Collimator Wakefield Calculations for ILC-TRC Report P. Tenenbaum LCC-Note-0101 20-Aug-2002 Abstract We summarize the formalism of collimator wakefields and their effect on beams which are near the center of the collimator gap, and apply the formalism to the TESLA, NLC, and CLIC collimation systems. 1 Introduction One of the beam dynamics effects which must be evaluated for the

287

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

No. 2 Distillate Prices by Sales Type, Selected States No. 2 Distillate Prices by Sales Type, Selected States Definitions Key Terms Definition Commercial/Institutional An energy-consuming sector that consists of service-providing facilities and equipment of: businesses; Federal, State, and local governments; and other private and public organizations, such as religious, social, or fraternal groups. The commercial sector includes institutional living quarters. It also includes sewage treatment facilities. Common uses of energy associated with this sector include space heating, water heating, air conditioning, lighting, refrigeration, cooking, and running a wide variety of other equipment. Note: This sector includes generators that produce electricity and/or useful thermal output primarily to support the activities of the above-mentioned commercial establishments.

288

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Product Prices by Sales Type Petroleum Product Prices by Sales Type Definitions Key Terms Definition Aviation Gasoline (Finished) A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Gas Plant Operator Any firm, including a gas plant owner, which operates a gas plant and keeps the gas plant records. A gas plant is a facility in which natural gas liquids are separated from natural gas or in which natural gas liquids are fractionated or otherwise separated into natural gas liquid products or both. For the purposes of this survey, gas plant operator data are contained in the refiner categories.

289

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

PAD District Imports by Country of Origin PAD District Imports by Country of Origin Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

290

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Imports by Destination Imports by Destination Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

291

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Pipeline, Tanker, and Barge Between PADDs Pipeline, Tanker, and Barge Between PADDs Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Barrel A unit of volume equal to 42 U.S. gallons. Conventional Blendstock for Oxygenate Blending (CBOB) Motor gasoline blending components intended for blending with oxygenates to produce finished conventional motor gasoline.

292

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Shell Storage Capacity at Operable Refineries Shell Storage Capacity at Operable Refineries Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Barrel A unit of volume equal to 42 U.S. gallons. Biomass-Based Diesel Fuel Biodiesel and other renewable diesel fuel or diesel fuel blending components derived from biomass, but excluding renewable diesel fuel coprocessed with petroleum feedstocks.

293

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Tanker and Barge Between PADDs Tanker and Barge Between PADDs Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Barrel A unit of volume equal to 42 U.S. gallons. Conventional Blendstock for Oxygenate Blending (CBOB) Motor gasoline blending components intended for blending with oxygenates to produce finished conventional motor gasoline. Conventional Gasoline Finished motor gasoline not included in the oxygenated or reformulated gasoline categories. Excludes reformulated gasoline blendstock for oxygenate blending (RBOB) as well as other blendstock.

294

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Number of Producing Gas Wells Number of Producing Gas Wells Definitions Key Terms Definition Gas Well A well completed for the production of natural gas from one or more gas zones or reservoirs. Such wells contain no completions for the production of crude oil. For definitions of related energy terms, refer to the EIA Energy Glossary. Sources Form EIA-895A, "Annual Quantity and Value of Natural Gas Production Report" , EIA estimates based on data from the Bureau of Safety and Environmental Enforcement, and predecessor agencies; state agencies; and World Oil Magazine. Background on "Natural Gas Annual" data Natural Gas Survey Forms and Instructions Explanatory Notes Beginning in 2001, the number of Federal offshore Gulf of Mexico producing gas and gas condensate wells is reported separately. For previous years the well counts for the Federal offshore Gulf of Mexico were included in the well counts

295

Ford Escape Advanced Research Vehicle Report Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Research Vehicle Advanced Research Vehicle Report Notes 1 "Overall AC electrical energy consumption (AC Wh/mi)" is based on AC electricity consumed during charging events which began during the reporting period and distance driven during all trips in the reporting period. 2 "Overall DC electrical energy consumption (DC Wh/mi)" is based on net DC electricity discharged from or charged to the plug-in battery pack and distance driven during all trips in the reporting period. DC Wh/mi may not be comparable to AC Wh/mi if AC electricity charged prior to the reporting period was discharged during driving within the reporting period, or if AC electricity charged during the reporting period was not discharged during driving within the reporting period.

296

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Production Production Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Barrel A unit of volume equal to 42 U.S. gallons. Butane (C4H10) A normally gaseous straight-chain or branch-chain hydrocarbon extracted from natural gas or refinery gas streams. It includes isobutane and normal butane and is designated in ASTM Specification D1835 and Gas Processors Association Specifications for commercial butane.

297

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Receipts by Pipeline, Tanker, and Barge Between PAD Districts Receipts by Pipeline, Tanker, and Barge Between PAD Districts Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Barrel A unit of volume equal to 42 U.S. gallons. Butane (C4H10) A normally gaseous straight-chain or branch-chain hydrocarbon extracted from natural gas or refinery gas streams. It includes isobutane and normal butane and is designated in ASTM Specification D1835 and Gas Processors Association Specifications for commercial butane.

298

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Exports by Destination Exports by Destination Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

299

Notes on parafermionic QFT's with boundary interaction  

E-Print Network (OSTI)

The main result of these notes is an analytical expression for the partition function of the circular brane model for arbitrary values of the topological angle. The model has important applications in condensed matter physics. It is related to the dissipative rotator (Ambegaokar-Eckern-Schon) model and describes a ``weakly blocked'' quantum dot with an infinite number of tunneling channels under a finite gate voltage bias. A numerical check of the analytical solution by means of Monte Carlo simulations has been performed recently. To derive the main result we study the so-called boundary parafermionic sine-Gordon model. The latter is of certain interest to condensed matter applications, namely as a toy model for a point junction in the multichannel quantum wire.

S. L. Lukyanov

2006-06-16T23:59:59.000Z

300

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Products Supplied Products Supplied Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Aviation Gasoline Blending Components Naphthas which will be used for blending or compounding into finished aviation gasoline (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates.

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

PriceTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

ASTM: The American Society for Testing and Materials. Aviation Gasoline (Finished): A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifi- cations are provided in ASTM Specification D 910 and Military Specifica- tion MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Aviation Gasoline Blending Components: Naphthas that will be used for blending or compounding into finished aviation gasoline (e.g., straight run gasoline, alkylate, reformate, benzene, toluene, and xylene). Excludes oxygenates (alcohols, ethers), butane, and pentanes plus. Oxygenates are reported as other hydrocarbons, hydrogen, and oxygenates. Barrel (petroleum): A unit of volume equal to 42 U.S. gallons. Biomass Waste:

302

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Weekly Supply Estimates Weekly Supply Estimates Definitions Key Terms Definition All Other Motor Gasoline Blending Components Naphthas (e.g. straight-run gasoline, alkylate, reformate, benzene, toluene, xylene) used for blending or compounding into finished motor gasoline. Includes receipts and inputs of Gasoline Treated as Blendstock (GTAB). Excludes conventional blendstock for oxygenate blending (CBOB), reformulated blendstock for oxygenate blending, oxygenates (e.g. fuel ethanol and methyl tertiary butyl ether), butane, and pentanes plus. Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton.

303

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Working Storage Capacity at Operable Refineries Working Storage Capacity at Operable Refineries Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Barrel A unit of volume equal to 42 U.S. gallons. Biomass-Based Diesel Fuel Biodiesel and other renewable diesel fuel or diesel fuel blending components derived from biomass, but excluding renewable diesel fuel coprocessed with petroleum feedstocks.

304

PIA - Industry Interactive Procurement System (IIPS) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industry Interactive Procurement System (IIPS) PIA - Industry Interactive Procurement System (IIPS) PIA - Industry Interactive Procurement System (IIPS) PIA - Industry Interactive...

305

NETL: LabNotes - March 2012  

NLE Websites -- All DOE Office Websites (Extended Search)

March 2012 March 2012 Modeling Multiphase Systems Fluid dynamics is the study that leads to automobiles with less drag in traveling through surrounding air, and to airplane wings that lift when air flows around them. Because many industrial processes employ moving fluids (gases or liquids), understanding the physical behavior of such systems can assist in the design of new and/or more efficient processes. To do that, engineers have developed a mathematical (computational) approach called computational fluid dynamics (CFD) to simulate the physical reality of these systems with the goal of improving industrial processes that employ moving fluids. Levels of averagin: discrete particles to continuum to filtered-continuum modles Describing flow is more challenging for solids than for liquids or gases.

306

PriceTechNotes2012.vp  

Gasoline and Diesel Fuel Update (EIA)

Data: Data: Prices and Expenditures 119 E L E C T R I C I T Y power retailers reporting sales to a state. Revenue and sales data are from the EIA Electric Power Annual data files. The prices for the residential and industrial sectors are based on residen- tial revenues and sales, and industrial revenues and sales, respectively. Commercial sector prices are calculated as the commercial sector reve- nues plus the non-transportation portion of "Other" revenues divided by the commercial sales plus the non-transportation portion of "Other" sales. The non-transportation portions of "Other" sales and revenues are esti- mated using SEDS transportation electricity consumption and the Electric Sales and Revenue "Other" sales. The transportation sector prices are cal- culated by dividing the "Other" category revenues by "Other"

307

ConsumTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Real Real Gross Domestic Product by State The real gross domestic product (GDP) data used in the U.S. Energy Infor- mation Administration State Energy Data System to calculate total energy consumed per chained (2005) dollar of output are shown in Tables D1 through D4. The data are the U.S. Department of Commerce, Bureau of Economic Analysis (BEA), real GDP estimates by state, beginning in 1977. The estimates are released in June of each year. For 1997 forward, BEA reports real GDP by state based on the North American Industry Classification System (NAICS). From 1977 through 1997, BEA reports real GDP by state based on the Standard Industrial Classification (SIC). A set of quality indexes for real GDP by state (1997=100) is available for 1977 through 1997. Given the differences in NAICS and SIC, BEA has cautioned against appending the two data series in an attempt to construct a single time series.

308

PriceTechNotes2012.vp  

Gasoline and Diesel Fuel Update (EIA)

Data: Data: Prices and Expenditures 135 A P P E N D I X A Price and Expenditure Variables ARICD Asphalt and road oil price in the industrial Dollars per million Btu ARICDZZ is independent. sector. ARICDUS = ARICVUS / ARICBUS * 1000 ARICV Asphalt and road oil expenditures in the Million dollars ARICVZZ = ARICBZZ * ARICDZZ / 1000 industrial sector. ARICVUS = SARICVZZ ARTCD Asphalt and road oil average price, all sectors. Dollars per million Btu ARTCD = ARICD ARTCV Asphalt and road oil total expenditures. Million dollars ARTCV = ARICV ARTXD Asphalt and road oil average price, all end-use Dollars per million Btu ARTXD = ARTXV / ARTXB * 1000 sectors. ARTXV Asphalt and road oil total end-use expenditures. Million dollars ARTXV = ARICV AVACD Aviation gasoline price in the transportation Dollars per million Btu AVACDZZ is independent. sector. AVACDUS = AVACVUS / AVACBUS * 1000 AVACV Aviation gasoline expenditures

309

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Consumption by End Use Consumption by End Use Definitions Key Terms Definition Commercial Consumption Gas used by nonmanufacturing establishments or agencies primarily engaged in the sale of goods or services. Included are such establishments as hotels, restaurants, wholesale and retail stores and other service enterprises; gas used by local, State, and Federal agencies engaged in nonmanufacturing activities. Distribution Use Natural gas used as fuel in the respondent's operations. Electric Power Consumption Gas used as fuel in the electric power sector. Electric Power Sector An energy-consuming sector that consists of electricity-only and combined heat and power (CHP) plants whose primary business is to sell electricity, or electricity and heat, to the public -i.e., North American Industry Classification System code 22 for plants. Combined heat and power plants that identify themselves as primarily in the commercial or industrial sectors are reported in those sectors.

310

PriceTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Data Data 2011: Prices and Expenditures 119 E L E C T R I C I T Y power retailers reporting sales to a state. Revenue and sales data are from the EIA Electric Power Annual data files. The prices for the residential and industrial sectors are based on residen- tial revenues and sales, and industrial revenues and sales, respectively. Commercial sector prices are calculated as the commercial sector reve- nues plus the non-transportation portion of "Other" revenues divided by the commercial sales plus the non-transportation portion of "Other" sales. The non-transportation portions of "Other" sales and revenues are esti- mated using SEDS transportation electricity consumption and the Electric Sales and Revenue "Other" sales. The transportation sector prices are cal- culated by dividing the "Other" category revenues by "Other"

311

PriceTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Data Data 2011: Prices and Expenditures 135 A P P E N D I X A Price and Expenditure Variables ARICD Asphalt and road oil price in the industrial Dollars per million Btu ARICDZZ is independent. sector. ARICDUS = ARICVUS / ARICBUS * 1000 ARICV Asphalt and road oil expenditures in the Million dollars ARICVZZ = ARICBZZ * ARICDZZ / 1000 industrial sector. ARICVUS = SARICVZZ ARTCD Asphalt and road oil average price, all sectors. Dollars per million Btu ARTCD = ARICD ARTCV Asphalt and road oil total expenditures. Million dollars ARTCV = ARICV ARTXD Asphalt and road oil average price, all end-use Dollars per million Btu ARTXD = ARTXV / ARTXB * 1000 sectors. ARTXV Asphalt and road oil total end-use expenditures. Million dollars ARTXV = ARICV AVACD Aviation gasoline price in the transportation Dollars per million Btu AVACDZZ is independent. sector. AVACDUS = AVACVUS / AVACBUS * 1000 AVACV Aviation gasoline

312

NETL: LabNotes - June 2009  

NLE Websites -- All DOE Office Websites (Extended Search)

June 2009 June 2009 NETL, Consortium Complete Landmark Gas Hydrates Drilling Expedition Helix drill rig Q4000 The research consortium used the Helix drill rig Q4000 to conduct a landmark gas hydrates drilling expedition that demonstrated the occurrence of gas hydrates at high saturations in the Gulf of Mexico. NETL, in collaboration with an industry research consortium, on May 6 completed a landmark gas hydrates drilling expedition that demonstrated the occurrence of gas hydrates at high saturations in reservoir quality sands in the Gulf of Mexico. The industry research consortium was led by Chevron. Participants in the field program included the U.S. Geological Survey, the Minerals Management Service, the borehole research group at the Lamont Doherty Earth Observatory, and AOA geophysics.

313

Property:File/Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name File/Description Property Type Text Description Description of the file's contents/purpose. Pages using the property "File/Description" Showing 25 pages using this property. (previous 25) (next 25) A Australia-Solar-Map.png + Average Daily Solar Exposure: Australia B BOEMRE OCS.oil.gas.2007-12.map.pdf + Outer Continental Shelf (OCS) Oil & Gas Leasing Program 2007 - 2012 BOEMRE US.CSB.Map.pdf + US Continental Shelf Boundary (CSB) Areas BOEMRE US.CSB.bathy.map.pdf + Outer Continental Shelf (OCS) Boundary Areas, in color BOEMRE atlantic.OCS.multiple.use.map.2003.pdf + Multiple Uses of the Atlantic Outer Continental Shelf BOEMRE lease.platforms.santa.barb.map.5.2010.pdf + Federal Leases in Pacific Ocean, near Santa Maria Basin

314

Herwig++ 2.7 Release Note  

E-Print Network (OSTI)

A new release of the Monte Carlo event generator Herwig++ (version 2.7) is now available. This version comes with a number of improvements including: an interface to the Universal FeynRules Output (UFO) format allowing the simulation of a wide range of new-physics models; developments of the Matchbox framework for next-to-leading order (NLO) simulations; better treatment of QCD radiation in heavy particle decays in new-physics models; a new tune of underlying event and colour connection parameters that allows a good simultaneous description of both Tevatron and LHC underlying event data and the effective cross-section parameter for double-parton scattering.

J. Bellm; S. Gieseke; D. Grellscheid; A. Papaefstathiou; S. Platzer; P. Richardson; C. Rohr; T. Schuh; M. H. Seymour; A. Siodmok; A. Wilcock; B. Zimmermann

2013-10-25T23:59:59.000Z

315

Herwig++ 2.7 Release Note  

E-Print Network (OSTI)

A new release of the Monte Carlo event generator Herwig++ (version 2.7) is now available. This version comes with a number of improvements including: an interface to the Universal FeynRules Output (UFO) format allowing the simulation of a wide range of new-physics models; developments of the Matchbox framework for next-to-leading order (NLO) simulations; better treatment of QCD radiation in heavy particle decays in new-physics models; a new tune of underlying event and colour connection parameters that allows a good simultaneous description of both Tevatron and LHC underlying event data and the effective cross-section parameter for double-parton scattering.

Bellm, J; Grellscheid, D; Papaefstathiou, A; Platzer, S; Richardson, P; Rohr, C; Schuh, T; Seymour, M H; Siodmok, A; Wilcock, A; Zimmermann, B

2013-01-01T23:59:59.000Z

316

Business Case Slide 12: High-Volume: Casks - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Casks - Description Previous Slide Next Slide Table of Contents High-Volume: Casks - Description Description Use DUO2 to enhance the shielding efficiency in spent fuel casks for...

317

Microsoft Word - 564M_Biomass_Project Descriptions FINAL 120409...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 More...

318

Property:WellFieldDescription | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Property Name WellFieldDescription Property Type String Description A description of the well field in the geothermal area This is a property...

319

Property:Wavemaking Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Wavemaking Description Property Type Text Pages using the property "Wavemaking Description" Showing 25 pages using this property. (previous 25) (next 25) A Alden Large Flume + Wave generators not yet designed Alden Small Flume + Period adjustable electronically, height adjustable mechanically Alden Wave Basin + Period adjustable electronically, height adjustable mechanically C Carderock Maneuvering & Seakeeping Basin + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions. Carderock Tow Tank 2 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions Carderock Tow Tank 3 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions.

320

Machinist Pipeline/Apprentice Program Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

POSTER DESCRIPTION: Poster Title: "Distributed Electric Power...  

NLE Websites -- All DOE Office Websites (Extended Search)

DESCRIPTION: Poster Title: "Distributed Electric Power from Bio-based and Fossil Fuels" Entity: Technology Management, Inc. 9718 Lake Shore Blvd., Cleveland, Ohio 44108 Author(s):...

322

Industrial Partnerships Office  

Industrial Partnerships Office 6/13 Richard Rankin Director----Roger Werne Deputy Director-----Yvonne King Administrator Nina Potter Manager Intellectual Property

323

Industrial Waste Generation  

NLE Websites -- All DOE Office Websites (Extended Search)

9) Page 2 of 7 Industrial Waste Generation Work with Engineered Nanomaterials Power Consumption Historical Contamination (groundwater, soil) Hazardous Waste Generation Atmospheric...

324

Construction Industry Software  

Science Conference Proceedings (OSTI)

... Translates a CIS/2 (CIMsteel Integration Standards) file into a 3D interactive VRML model of a steel structure or an IFC (Industry Foundation Classes ...

2012-04-23T23:59:59.000Z

325

Search - Industrial Partnerships Office  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore ...

326

Technologies - Industrial Partnerships Office  

Energy, Utilities, & Power Systems. Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988

327

Industrial Energy Efficiency Assessments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Energy Efficiency Assessments Lynn Price Staff Scientist China Energy Group Energy Analysis Department Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Industrial Energy Efficiency Assessments - Definition and overview of key components - International experience - Chinese situation and recommendations - US-China collaboration Industrial Energy Efficiency Assessments - Analysis of the use of energy and potential for energy efficiency in an industrial facility * Current situation * Recommendations for improving energy efficiency * Cost-benefit analysis of recommended options * An action plan for realizing potential savings Types of Industrial Energy Efficiency Assessments - Preliminary or walk-through - Detailed or diagnostic Audit criteria

328

OpenEI - Industrial  

Open Energy Info (EERE)

renewable energy consumption (in quadrillion btu) for electricity generation in the United States by energy use sector (commercial, industrial and electric power) and by...

329

Linear Collider Collaboration Tech Notes LCC-0113 CBP Tech Note-276  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 CBP Tech Note-276 February 2003 The NLC Main Damping Ring Lattice Mark Woodley 1 and Andrzej Wolski 2 1 Stanford Linear Accelerator Center Stanford University Menlo Park, CA 04025 2 Lawrence Berkeley National Laboratory University of California Berkeley, CA Abstract: Studies of the NLC Main Damping Ring lattice since April 2001 have indicated that there are a number of collective effects that potentially limit operational performance. One possible way to reduce the impact of these effects is to raise the momentum compaction of the lattice, which requires a significant redesign. In this note, we present a lattice that has a momentum compaction four times larger than the previous design. We discuss the linear and nonlinear dynamical properties of the lattice, and

330

Linear Collider Collaboration Tech Notes LCC-0130 CBP Tech Note-302  

NLE Websites -- All DOE Office Websites (Extended Search)

30 30 CBP Tech Note-302 March 2004 Abstract This note documents a set of expressions used to explore the issue of whether or not it is reasonable to consider a conventional positron source for a Tesla formatted beam. The critical issue is that of energy deposition in the conversion target and the comparison of the induced stress with the ultimate tensile strength of the target material. Since the length of the incident beam pulse is large in comparison to the ratio of beam size to the speed of sound, the concurrent pressure pulse dissipates in a time short compared to the overall pulse duration and one is left with only the Research and Development Issues for NLC Damping Rings 2003-2004 A. Wolski Lawrence Berkeley National Laboratory

331

Linear Collider Collaboration Tech Notes LCC-0105 CBP Tec Note-266  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 CBP Tec Note-266 October 2002 Effects of Systematic Multipole Errors on the Dynamic Aperture of the NLC Main Damping Rings A. Wolski, J.-Y. Jung Lawrence Berkeley National Laboratory University of California Berkeley, CA Abstract: Recent work on designs of dipoles, quadrupoles and sextupoles for the NLC Main Damping Ring has led to estimates of the systematic multipole components in the fields of these magnets. We report on studies of the effects of these multipoles on the dynamic aperture of the damping ring, and show that the systematic multipole components in the present magnet designs are unlikely to be a severe limitation. LCC-0105 CBP Tech Note-266 Effects of Systematic Multipole Errors on the Dynamic

332

Linear Collider Collaboration Tech Notes LCC-0080 CBP Tech Note-244  

NLE Websites -- All DOE Office Websites (Extended Search)

0 0 CBP Tech Note-244 May 2002 Estimates of Collective Effects in the NLC Main Damping Rings A. Wolski and S. de Santis Lawrence Berkeley National Laboratory Berkeley, California Abstract: Damping Ring performance depends on the ability to store the design beam current, and extract the beam with the specified low transverse emittance. Given the high bunch charge and moderate energy, a variety of collective effects could play a significant role, in either limiting the bunch current, or increasing the emittance. Here, we estimate the consequences of various effects, based on current theories and understanding. LCC-0080 CBP Tech Note-244 Estimates of Collective Effects in the NLC Main Damping Rings A. Wolski and S. de Santis Lawrence Berkeley National Laboratory

333

Linear Collider Collaboration Tech Notes LCC-0150 CBP Tech Note-321  

NLE Websites -- All DOE Office Websites (Extended Search)

0 0 CBP Tech Note-321 June 2004 Abstract This note documents a set of expressions used to explore the issue of whether or not it is reasonable to consider a conventional positron source for a Tesla formatted beam. The critical issue is that of energy deposition in the conversion target and the comparison of the induced stress with the ultimate tensile strength of the target material. Since the length of the incident beam pulse is large in comparison to the ratio of beam size to the speed of sound, the concurrent pressure pulse dissipates in a time short compared to the overall pulse duration and one is left with only the Research and Development Issues for NLC Damping Rings 2004-2005 A. Wolski June 2004

334

Linear Collider Collaboration Tech Notes LCC-0155 CBP Tech Note-326  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 CBP Tech Note-326 July 2004 Abstract This note documents a set of expressions used to explore the issue of whether or not it is reasonable to consider a conventional positron source for a Tesla formatted beam. The critical issue is that of energy deposition in the conversion target and the comparison of the induced stress with the ultimate tensile strength of the target material. Since the length of the incident beam pulse is large in comparison to the ratio of beam size to the speed of sound, the concurrent pressure pulse dissipates in a time short compared to the overall pulse duration and one is left with only the Spin-Tracking Studies for Beam Polarization Preservation in the NLC Main Damping Rings

335

Linear Collider Collaboration Tech Notes LCC-0147 CBP Tech Note-319  

NLE Websites -- All DOE Office Websites (Extended Search)

7 7 CBP Tech Note-319 June 2004 Abstract This note documents a set of expressions used to explore the issue of whether or not it is reasonable to consider a conventional positron source for a Tesla formatted beam. The critical issue is that of energy deposition in the conversion target and the comparison of the induced stress with the ultimate tensile strength of the target material. Since the length of the incident beam pulse is large in comparison to the ratio of beam size to the speed of sound, the concurrent pressure pulse dissipates in a time short compared to the overall pulse duration and one is left with only the Intrabeam Scattering in the NLC Main Damping Rings A. Wolski June 2004 Lawrence Berkeley National Laboratory

336

Emplacement Drift System Description Document  

SciTech Connect

The Emplacement Drift System is part of the Engineered Barrier System and provides the interface between the various waste package (WP) systems and the Ground Control System. In conjunction with the various WPs, the Emplacement Drift System limits the release and transport of radionuclides from the WP to the Natural Barrier following waste emplacement. Collectively, the Emplacement Drift System consists of the structural support hardware (emplacement drift invert and WP emplacement pallet) and any performance-enhancing barriers (drip shields and invert ballast) installed or placed in the emplacement drifts. The Emplacement Drift System is entirely located within the emplacement drifts in the subsurface portion of the Monitored Geologic Repository (MGR); specifically, it is physically bounded by the Subsurface Facility System, the Ground Support System, and the Natural Barrier. The Emplacement Drift System supports the key MGR functions of limiting radionuclide release to the Natural Barrier, minimizing the likelihood of a criticality external to the WPs, limiting natural and induced environmental effects, and providing WP support. The Emplacement Drift System limits radionuclide release to the Natural Barrier by controlling the movement of radionuclides within the emplacement drift and to the Natural Barrier, and by limiting water contact with the WPs. The Emplacement Drift System provides physical support and barriers for emplaced WPs that reduce water contact. The Emplacement Drift WP spacing supports the thermal loading performance by complimenting drift layout and orientation as described in the system description document for the Subsurface Facility System. The Emplacement Drift System supports the WP and also provides an environment that aids in enhancing WP confinement performance. As part of the Engineered Barrier System, the Emplacement Drift System interfaces with the WP systems. The Emplacement Drift System also interfaces with the Natural Barrier, Subsurface Facility System, and Ground Control System for the space and location of emplaced WPs, for the controlled release of radionuclides, and for controlling the heat, chemical, and physical effects that interact between these systems. The Emplacement Drift System interfaces with the Subsurface Ventilation System for preclosure heat removal from WPs. The Emplacement Drift System interfaces with the Waste Emplacement/Retrieval System and the Performance Confirmation Emplacement Drift Monitoring System for equipment clearance for the emplacement, retrieval, and monitoring of waste.

Eric Loros

2001-07-31T23:59:59.000Z

337

A note on the asymptotic distribution of the sample variogram  

Science Conference Proceedings (OSTI)

A Note on the Asymptotic Distribution of the. Sample Variogram I. Bruce M. Davis 2 and Leon E. Borgman 3. INTRODUCTION. Because the variogram is such a ...

338

DOE Sustainability Assistance Network (SAN) Notes Thursday, February...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 of 2 DOE Sustainability Assistance Network (SAN) Notes Thursday, February 21, 2013 1. Oak Ridge National Laboratory Water Resource Management Dan OConnor, ORNL Implementing...

339

DOE Sustainability Assistance Network (SAN) Notes Thursday, June...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 of 3 DOE Sustainability Assistance Network (SAN) Notes Thursday, June 21, 2012 1. Sustainability Performance Office (SPO) Highlights Paul Estabrooks, SPO Paul Estabrooks...

340

DOE Sustainability Assistance Network (SAN) Notes Thursday, August...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 of 2 DOE Sustainability Assistance Network (SAN) Notes Thursday, August 16, 2012 1. Sustainability Performance Office (SPO) Highlights Paul Estabrooks, SPO The guidance for...

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

DOE Sustainability Assistance Network (SAN) Notes Thursday, June...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 of 3 DOE Sustainability Assistance Network (SAN) Notes Thursday, June 20, 2013 1. Sustainability Performance Office Highlights Paul Estabrooks, SPO Nominations for the 2013...

342

Summary Notes from 28 May 2008 Generic Technical Issue Discussion...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary Notes from 28 May 2008 Generic Technical Issue Discussion on Estimating Waste Inventory and Waste Tank Characterization Attendees: Representatives from Department of...

343

PLEASE NOTE THURSDAY DATE - COLLOQUIUM: Professor Ralph Roskies...  

NLE Websites -- All DOE Office Websites (Extended Search)

MBG Auditorium PLEASE NOTE THURSDAY DATE - COLLOQUIUM: Professor Ralph Roskies - "Big Data at the Pittsburgh Supercomputing Center" Professor Ralph Roskies Pittsburgh...

344

Photovoltaic industry manufacturing technology. Final report  

DOE Green Energy (OSTI)

This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

1998-08-01T23:59:59.000Z

345

Methods in Industrial Biotechnology for Chemical Engineers  

E-Print Network (OSTI)

In keeping with the definition that biotechnology is really no more than a name given to a set of techniques and processes, the authors apply some set of fuzzy techniques to chemical industry problems such as finding the proper proportion of raw mix to control pollution, to study flow rates, to find out the better quality of products. We use fuzzy control theory, fuzzy neural networks, fuzzy relational equations, genetic algorithms to these problems for solutions. When the solution to the problem can have certain concepts or attributes as indeterminate, the only model that can tackle such a situation is the neutrosophic model. The authors have also used these models in this book to study the use of biotechnology in chemical industries. This book has six chapters. First chapter gives a brief description of biotechnology. Second chapter deals will proper proportion of mix of raw materials in cement industries to minimize pollution using fuzzy control theory. Chapter three gives the method of determination of temperature set point for crude oil in oil refineries. Chapter four studies the flow rates in chemical industries using fuzzy neutral networks. Chapter five gives the method of minimization of waste gas flow in chemical industries using fuzzy linear programming. The final chapter suggests when in these studies indeterminancy is an attribute or concept involved, the notion of neutrosophic methods can be adopted.

W. B. Vasantha Kandasamy; Florentin Smarandache

2008-07-13T23:59:59.000Z

346

Small Arms Transfers: Exporting States WEAPONS & MARKETS Research Notes  

E-Print Network (OSTI)

annual authorized trade in ‘small arms ’ 1 to exceed USD 7 billion a year (Small Arms Survey, 2011, p. 9). 2 A lack of transparency on the part of many states and difficulties of disaggregating data on transfers that some states do report create numerous challenges for the study of this activity. Lists of the most active countries tend to be skewed toward those that are more transparent or cater to large civilian markets. Nonetheless, sufficient data and expertise exist to allow for broad assessments to be made about the trade in small arms. This Research Note assesses the countries that export the greatest value of small arms. It does not focus on volumes of materiel or a transfer’s effect on peace and security. States report on their arms transfers very unevenly. Some are very transparent, while others are secretive. Sometimes countries view transfers of small arms as ‘aid’, ‘gifts’, or ‘security assistance ’ for which no payment is made or customs fees levied. These transfers tend not to appear in open records. Nevertheless, customs data is an especially important source of data, 3 as are countries ’ national arms export reports and submissions to the UN Register of Conventional Arms (UNROCA). 4 The news media as well as research and advocacy organizations also help shed light on this activity. The Survey has supplemented these sources by contacting governments and industry officials directly, some of whom have provided information not otherwise available. The rankings provided here tend to capture more accurately the activities of those countries that are more forthcoming in publicly recording their exports. Moreover, the dollar values of countries ’ exports are, generally speaking, underestimates. For example, it is not possible

The Small; Arms Survey

2011-01-01T23:59:59.000Z

347

Extending soft sets with description logics  

Science Conference Proceedings (OSTI)

Molodtsov initiated the concept of soft set theory, which can be used as a generic mathematical tool for dealing with uncertainty. Description Logics (DLs) are a family of knowledge representation languages which can be used to represent the terminological ... Keywords: Description logics, Extended soft sets, Soft sets, Terminology

Yuncheng Jiang; Yong Tang; Qimai Chen; Ju Wang; Suqin Tang

2010-03-01T23:59:59.000Z

348

Recent developments: Industry briefs  

SciTech Connect

This article is the `Industry Briefs` portion of the March 1992 `Recent Developments` section of Nuexco. Specific issues mentioned are: (1) closure of Yankee Rowe, (2) steam-generator tube plugging at Trojan, (3) laser enrichment in South Africa, (4) the US uranium industry, (5) planning for two nuclear units in Taiwan, and (6) the establishment of a Czech/French joint venture.

NONE

1992-03-01T23:59:59.000Z

349

Geothermal industry assessment  

DOE Green Energy (OSTI)

An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

Not Available

1980-07-01T23:59:59.000Z

350

A SUMMARY OF INDUSTRIAL ACCIDENTS IN USAEC FACILITIES  

SciTech Connect

The summary includes descriptions of serious accidents for l959 and 1960, AEC industrial injury frequency rates, criticality accidents, radiation exposures, accidents involving radioactive materials in AEC activities during 1959 and 1960, and accidents involving fatalities in AEC activities during l959 and 1960. (B.O.G.)

1961-12-01T23:59:59.000Z

351

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Yield Yield Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The conversion factor for asphalt is 5.5 barrels per short ton. Distillate Fuel Oil A general classification for one of the petroleum fractions produced in conventional distillation operations. It includes diesel fuels and fuel oils. Products known as No. 1, No. 2, and No. 4 diesel fuel are used in on-highway diesel engines, such as those in trucks and automobiles, as well as off-highway engines, such as those in railroad locomotives and agricultural machinery. Products known as No. 1, No. 2, and No. 4 fuel oils are used primarily for space heating and electric power generation.

352

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Motor Gasoline Motor Gasoline Definitions Key Terms Definition Bulk Sales Wholesale sales of gasoline in individual transactions which exceed the size of a truckload. Dealer Tank Wagon Sales (DTW) Wholesale sales of gasoline priced on a delivered basis to a retail outlet. Gas Plant Operator Any firm, including a gas plant owner, which operates a gas plant and keeps the gas plant records. A gas plant is a facility in which natural gas liquids are separated from natural gas or in which natural gas liquids are fractionated or otherwise separated into natural gas liquid products or both. For the purposes of this survey, gas plant operator data are contained in the refiner categories. Gasoline Grades The classification of gasoline by octane ratings. Each type of gasoline (conventional and reformulated) is classified by three grades - regular, midgrade, and premium. Note: gasoline sales are reported by grade in accordance with their classification at the time of sale. In general, automotive octane requirements are lower at high altitudes. Therefore, in some areas of the United States, such as the Rocky Mountain States, the octane ratings for the gasoline grades may be 2 or more octane points lower.

353

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Reserves Summary Reserves Summary Definitions Key Terms Definition Dry Natural Gas Natural gas which remains after: 1) the liquefiable hydrocarbon portion has been removed from the gas stream (i.e., gas after lease, field, and/or plant separation); and 2) any volumes of nonhydrocarbon gases have been removed where they occur in sufficient quantity to render the gas unmarketable. (Note: Dry natural gas is also known as consumer-grade natural gas. The parameters for measurement are cubic feet at 60 degrees Fahrenheit and 14.73 pounds per square inch absolute.) Natural Gas Associated-Dissolved The combined volume of natural gas which occurs in crude oil reservoirs either as free gas (associated) or as gas in solution with crude oil (dissolved). Natural Gas Liquids Those hydrocarbons in natural gas which are separated from the gas through the processes of absorption, condensation, adsorption, or other methods in gas processing or cycling plants. Generally such liquids consist of propane and heavier hydrocarbons and are commonly referred to as condensate, natural gasoline, or liquefied petroleum gases. Where hydrocarbon components lighter than propane are recovered as liquids, these components are included with natural gas liquids.

354

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

by End Use by End Use Definitions Key Terms Definition Adjusted Sales Distillate fuel oil sales estimates have been adjusted at the PADD district level to equal published EIA volume estimates of petroleum products supplied in the U.S. marketplace. The kerosene and residual fuel oil sales estimates have been adjusted at the national level. The products supplied estimates can be found in the Petroleum Supply Annual for the appropriate year. In addition, electric power generation data and on-highway diesel data are used in lieu of adjusted survey results. For details, see Technical Note 3 in the Fuel Oil and Kerosene Sales report. All Other Sales for all other energy-consuming sectors not included elsewhere. Commercial An energy-consuming sector that consists of service-providing facilities and equipment of nonmanufacturing businesses; Federal, State, and local governments; and other private and public organizations, such as religious, social, or fraternal groups. The commercial sector includes institutional living quarters. Common uses of energy associated with this sector include space heating, water heating, air conditioning, lighting, refrigeration, cooking and running a wide variety of other equipment.

355

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Distillate by End Use Distillate by End Use Definitions Key Terms Definition Adjusted Sales Distillate fuel oil sales estimates have been adjusted at the PADD district level to equal published EIA volume estimates of petroleum products supplied in the U.S. marketplace. The kerosene and residual fuel oil sales estimates have been adjusted at the national level. The products supplied estimates can be found in the Petroleum Supply Annual for the appropriate year. In addition, electric power generation data and on-highway diesel data are used in lieu of adjusted survey results. For details, see Technical Note 3 in the Fuel Oil and Kerosene Sales report. All Other Sales for all other energy-consuming sectors not included elsewhere. Commercial An energy-consuming sector that consists of service-providing facilities and equipment of nonmanufacturing businesses; Federal, State, and local governments; and other private and public organizations, such as religious, social, or fraternal groups. The commercial sector includes institutional living quarters. Common uses of energy associated with this sector include space heating, water heating, air conditioning, lighting, refrigeration, cooking and running a wide variety of other equipment.

356

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Kerosene by End Use Kerosene by End Use Definitions Key Terms Definition Adjusted Sales Distillate fuel oil sales estimates have been adjusted at the PADD district level to equal published EIA volume estimates of petroleum products supplied in the U.S. marketplace. The kerosene and residual fuel oil sales estimates have been adjusted at the national level. The products supplied estimates can be found in the Petroleum Supply Annual for the appropriate year. In addition, electric power generation data and on-highway diesel data are used in lieu of adjusted survey results. For details, see Technical Note 3 in the Fuel Oil and Kerosene Sales report. All Other Sales for all other energy-consuming sectors not included elsewhere. Commercial An energy-consuming sector that consists of service-providing facilities and equipment of nonmanufacturing businesses; Federal, State, and local governments; and other private and public organizations, such as religious, social, or fraternal groups. The commercial sector includes institutional living quarters. Common uses of energy associated with this sector include space heating, water heating, air conditioning, lighting, refrigeration, cooking and running a wide variety of other equipment.

357

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

U.S. Weekly Products Supplied U.S. Weekly Products Supplied Definitions Key Terms Definition Barrel A unit of volume equal to 42 U.S. gallons. Distillate Fuel Oil A general classification for one of the petroleum fractions produced in conventional distillation operations. It includes diesel fuels and fuel oils. Products known as No. 1, No. 2, and No. 4 diesel fuel are used in on-highway diesel engines, such as those in trucks and automobiles, as well as off-highway engines, such as those in railroad locomotives and agricultural machinery. Products known as No. 1, No. 2, and No. 4 fuel oils are used primarily for space heating and electric power generation. Finished Motor Gasoline A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in spark-ignition engines. Motor gasoline, as defined in ASTM Specification D 4814 or Federal Specification VV-G-1690C, is characterized as having a boiling range of 122 to 158 degrees Fahrenheit at the 10 percent recovery point to 365 to 374 degrees Fahrenheit at the 90 percent recovery point. Motor Gasoline includes conventional gasoline; all types of oxygenated gasoline, including gasohol; and reformulated gasoline, but excludes aviation gasoline. Note: Volumetric data on blending components, such as oxygenates, are not counted in data on finished motor gasoline until the blending components are blended into the gasoline.

358

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Motor Gasoline Prices by Grade and Sales Type Motor Gasoline Prices by Grade and Sales Type Definitions Key Terms Definition Bulk Sales Wholesale sales of gasoline in individual transactions which exceed the size of a truckload. Dealer Tank Wagon Sales (DTW) Wholesale sales of gasoline priced on a delivered basis to a retail outlet. Gas Plant Operator Any firm, including a gas plant owner, which operates a gas plant and keeps the gas plant records. A gas plant is a facility in which natural gas liquids are separated from natural gas or in which natural gas liquids are fractionated or otherwise separated into natural gas liquid products or both. For the purposes of this survey, gas plant operator data are contained in the refiner categories. Gasoline Grades The classification of gasoline by octane ratings. Each type of gasoline (conventional and reformulated) is classified by three grades - regular, midgrade, and premium. Note: gasoline sales are reported by grade in accordance with their classification at the time of sale. In general, automotive octane requirements are lower at high altitudes. Therefore, in some areas of the United States, such as the Rocky Mountain States, the octane ratings for the gasoline grades may be 2 or more octane points lower.

359

Take Notes from Corn Hybrid Plots  

E-Print Network (OSTI)

Corn harvest is slow to get going this year, with only 5 % of the state’s crop reported harvested as of 24 Sep (USDA-NASS, 25 Sep 2006). The causes of the slow start to harvest are slower than normal maturation of the grain (Fig 1), cool temperatures (slower grain drying), and muddy field conditions due to the continuing pattern of frequent rains. The slow pace of corn harvest coupled with the poor stalk quality in some fields (Nielsen, 2006) reminds us how spoiled we were with generally good harvest conditions of the past two seasons. But, that is not the point of this article. Fig. 1. Percent of Indiana’s corn crop that is rated “mature and safe from frost”, as of 24 Sep 2006. Data source: USDA-NASS. If rainy weather and soggy field conditions are keeping you from your own harvest, spend some of your down time to walk or re-walk neighborhood on-farm hybrid plots before they are harvested. Many of these trials are still “signed ” so that you can identify © 2006, Purdue UnivRL (Bob) Nielsen Page 2 9/27/2006 the seed company and their hybrid numbers. Record notes on hybrid characteristics such as ear height, ear size, completeness of kernel set, husk coverage, standability, and

R. L. (bob Nielsen

2006-01-01T23:59:59.000Z

360

BNL ALARA Center: ALARA Notes, No. 9  

SciTech Connect

This issue of the Brookhaven National Laboratory`s Alara Notes includes the agenda for the Third International Workshop on ALARA and specific instructions on the use of the on-line fax-on-demand service provided by BNL. Other topics included in this issue are: (1) A discussion of low-level discharges from Canadian nuclear plants, (2) Safety issues at French nuclear plants, (3) Acoustic emission as a means of leak detection, (4) Replacement of steam generators at Doel-3, Beaznau, and North Anna-1, (5) Remote handling equipment at Bruce, (6) EPRI`s low level waste program, (7) Radiation protection during concrete repairs at Savannah River, (8) Reactor vessel stud removal/repair at Comanche Peak-1, (9) Rework of reactor coolant pump motors, (10) Restoration of service water at North Anna-1 and -2, (11) Steam generator tubing problems at Mihama-1, (12) Full system decontamination at Indian Point-2, (13) Chemical decontamination at Browns Ferry-2, and (14) Inspection methodolody in France and Japan.

Khan, T.A.; Xie, J.W.; Beckman, M.C. [eds.] [and others

1994-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry and Neutron Science Industry and Neutron Science Industry and Neutron Science: Working To Make a Match "In fundamental research, we want to know everything. Industry wants to know enough to answer a question." Research Contact: Mike Crawford September 2011, Written by Deborah Counce Mike Crawford and Souleymane Diallo Mike Crawford of Dupont (right) and Souleymane Diallo, instrument scientist for the Backscattering Spectrometer at SNS, prepare a material sample for an experiment on the instrument. Industrial users are starting to eye the potential of neutron science for solving problems that can't be solved in any other way. At the same time, the SNS and HFIR neutron science facilities at ORNL are exploring ways to woo such users and to make a match of it, to the benefit of both.

362

Uranium industry annual 1996  

SciTech Connect

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

NONE

1997-04-01T23:59:59.000Z

363

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Used as Feedstock for Hydrogen Production Natural Gas Used as Feedstock for Hydrogen Production Definitions Key Terms Definition Hydrogen The lightest of all gases, occurring chiefly in combination with oxygen in water; exists also in acids, bases, alcohols, petroleum, and other hydrocarbons. Natural Gas A gaseous mixture of hydrocarbon compounds, the primary one being methane. Petroleum Administration for Defense (PAD) Districts Geographic aggregations of the 50 States and the District of Columbia into five districts by the Petroleum Administration for Defense in 1950. These districts were originally defined during World War II for purposes of administering oil allocation. Description and maps of PAD Districts and Refining Districts. For definitions of related energy terms, refer to the EIA Energy Glossary.

364

Uranium industry annual 1995  

SciTech Connect

The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

NONE

1996-05-01T23:59:59.000Z

365

Energy conservation in the textile industry: 10 case histories  

DOE Green Energy (OSTI)

Presented are ten case studies of energy conserving technologies that have been implemented by the textile industry. For each case is given: the name and location of the plant and an employee contact, description of products, energy consumption and costs in years before and after the energy conserving technology was implemented, energy savings since the energy conserving technology was implemented, description of investment decision-making process, and description of any institutional and environmental considerations. Measures included are: tandem preparation line, dyebath reuse, bump-and-run (dyebath temperature drifts for the last 85% of the hold time), foam finishing, wastewater heat recovery, wastewater chlorination and reuse, oven exhaust air counterflow, boiler economizer, wood-fired boiler, and solar industrial process heat. Several other energy conserving technologies that were not studied are briefly summarized. (LEW)

Not Available

366

Description and use of LSODE, the Livemore Solver for Ordinary Differential Equations  

SciTech Connect

This document provides a comprehensive description of LSODE, a solver for initial value problems in ordinary differential equation systems. It is intended to bring together numerous materials documenting various aspects of LSODE, including technical reports on the methods used, published papers on LSODE, usage documentation contained within the LSODE source, and unpublished notes on algorithmic details. The three central chapters-n methods, code description, and code usage-are largely independent. Thus, for example, we intend that readers who are familiar with the solution methods and interested in how they are implemented in LSODE can read the Introduction and then chapter 3, Description of Code, without reading chapter 2, Description and Implementation of Methods. Similarly, those interested solely in how to use the code need read only the Introduction and then chapter 4, Description of Code Usage. In this case chapter 5, Example Problem, which illustrates code usage by means of a simple, stiff chemical kinetics problem, supplements chapter 4 and may be of further assistance. Although this document is intended mainly for users of LSODE, it can be used as supplementary reading material for graduate and advanced undergraduate courses on numerical methods. Engineers and scientists who use numerical solution methods for ordinary differential equations may also benefit from this document.

Radhakrishnan, K; Hindmarsh, A C

1993-12-01T23:59:59.000Z

367

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Jun Wang Physicist, Industrial Program Coordinator Phone: 344-2661 Email: junwang@bnl.gov Jun Wang is an Industrial Program Coordinator in the Photon Science Directorate at Brookhaven National Laboratory. She is working closely with industrial researchers as well as beamline staff to identify and explore new opportunities in industrial applications using synchrotron radiation. She has been leading the industrial research program including consultation, collaboration and outreach to the industrial user groups. Before joining BNL in 2008, Jun Wang was a Lead Scientist for a high-resolution high throughput powder diffraction program at the Advanced Photon Source (APS). As a Physicist at BNL, her research focuses on materials structure determination and evolution. Her expertise covers wide range x-ray techniques such as thin film x-ray diffraction and reflectivity, powder diffraction, small angle x-ray scattering, protein solution scattering and protein crystallography, as well as x-ray imaging. Currently she is the project leader of a multi-million dollar project on transmission x-ray microscopy recently funded by the U.S. DOE and the spokesperson for this new imaging beamline at the NSLS. She has also been collaborating with universities and industries for several projects on energy research at the NSLS.

368

Solar energy industry survey  

SciTech Connect

This report describes the results of a survey of companies in the solar energy industry. The general objective of the survey was to provide information to help evaluate the effectiveness of technology transfer mechanisms for the development of the solar industry. The specific objectives of the survey included: (1) determination of the needs of the solar industry; (2) identification of special concerns of the solar industry; and (3) determination of the types of technology transfer mechanisms that would be most helpful to the solar industry in addressing these needs and concerns. The major focus was on technical problems and developments, but institutional and marketing considerations were also treated. The majority of the sample was devoted to the solar heating and cooling (SHAC) component of the industry. However, a small number of photovoltaic (PV), wind, and power generation system manufacturers were also surveyed. Part I discusses the methodology used in the selection, performance, and data reduction stages of the survey, comments on the nature of the responses, and describes the conclusions drawn from the survey. The latter include both general conclusions concerning the entire solar industry, and specific conclusions concerning component groups, such as manufacturers, architects, installers, or dealers. Part II consists of tabulated responses and non-attributed verbatim comments that summarize and illustrate the survey results.

1979-08-06T23:59:59.000Z

369

PriceTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Natural Natural gas prices are developed for the residential, commercial, indus- trial, transportation, and electric power sectors. Reported natural gas prices are retail prices for sales of natural gas to ultimate users. Natural gas prices are intended to include all federal, state, and local taxes, surcharges, and adjustments billed to consumers. Although the EIA data collection form states that taxes are to be included in the re- ported gross revenues, it is most likely that respondents would not con- sider sales taxes as part of their companies' gross revenues, and some may not be reporting them. As a result, consumer sales taxes may not be cov- ered in full. For more information see End-Use Taxes: Current EIA Prac- tices, page 23, http://www.eia.gov/FTPROOT/financial/ 0583.pdf. Estimates of the amount of natural gas consumed by the residential, com- mercial, industrial, and electric

370

PriceTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Sections Sections 2 through 6 provide information for each of the major energy sources: coal, natural gas, petroleum, renewable energy, and electricity. Section 7 describes adjustments for consumption of industrial process fuel and intermediate products and other uncosted energy sources. Appendix A is an alphabetical listing of the variable names and formulas used in the price and expenditure module. Appendix B presents the cur- rent-dollar gross domestic product (GDP) by state used to calculate en- ergy expenditures as percent of GDP. Appendix C provides metric and other physical conversion factors for measures used in energy analyses. Appendix D summarizes the changes in SEDS content made since the last complete release of data. There are over 600 variables in SEDS. All of the variables are identified by five-character mnemonic series names, or MSN. In the following ex- ample, MGACV

371

ConsumTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Data Data 2011: Consumption 31 P E T R O L E U M O V E R V I E W U.S. Energy Information Administration 32 State Energy Data 2011: Consumption Petroleum Products Residential Sector Estimated Consumption (RC) Commercial Sector Estimated Consumption (CC) Industrial Sector Estimated Consumption (IC) Transportation Sector Estimated Consumption (AC) Electric Power Sector Estimated Consumption (EI) Total Estimated Consumption (TC) Asphalt and Road Oil (AR) ARIC = ARTC + + Aviation Gasoline (AV) AVAC = AVTC + + Distillate Fuel Oil (DF) DFRC + DFCC + DFIC + DFAC + DFEI = DFTC + + + + + + Jet Fuel (JF) JFAC JFEU = JFTC + + Kerosene (KS) KSRC + KSCC + KSIC = KSTC + + + + Liquefied Petroleum Gases (LG) LGRC + LGCC + LGIC + LGAC = LGTC + + + Lubricants (LU) + LUIC LUAC = LUTC + + + Motor Gasoline (MG) MGCC MGIC MGAC = MGTC + + + + Residual Fuel Oil (RF) RFCC RFIC + RFAC + RFEI = RFTC + + + Other Petroleum Products (PO) PCCC 1 + POIC 2 + PCEI

372

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Heating Oil & Propane Prices Heating Oil & Propane Prices Definitions Key Terms Definition No. 2 Fuel Oil (Heating Oil) A distillate fuel oil for use in atomizing type burners for domestic heating or for use medium capacity commercial-industrial burner units, with distillation temperatures between 540-640 degrees Fahrenheit at the 90-percent recovery point; and the kinematic viscosities between 1.9-3.4 centistokes at 100 degrees Fahrenheit as defined in ASTM Specification D396-92. Petroleum Administration for Defense District (PADD): PADD 1 (East Coast): PADD 1A (New England): Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, Vermont. PADD 1B (Central Atlantic): Delaware, District of Columbia, Maryland, New Jersey, New York, Pennsylvania. PADD 1C (Lower Atlantic): Florida, Georgia, North Carolina, South Carolina, Virginia, West Virginia.

373

NETL: LabNotes -November 2011  

NLE Websites -- All DOE Office Websites (Extended Search)

November 2011 November 2011 Electric Current Locator: Sees What No Eye Can See Vacuum arc remelting (VAR) is a crucial step in creating metals and alloys with the advanced properties needed for the aerospace, power generation, defense, medical, and nuclear industries. The problem is that the metal ingots produced occasionally contain defects, but who can see within the enclosed crucible of the furnace to know what causes these defects? Sensors for the ELC, placed outside the furnace, can "see" through walls. Sensors for the ELC, placed outside the furnace, can "see" through walls. The new electric current locator (ECL) can "see" where eyes cannot. Developed under an agreement between the National Energy Technology Laboratory (NETL) and the Specialty Metals Processing Consortium, the ECL

374

PriceTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Current-Dollar Current-Dollar Gross Domestic Product by State The current-dollar gross domestic product (GDP) data used in the U.S. Energy Information Administration State Energy Data System (SEDS) to calculate total energy consumed per current dollar of output are shown in Tables B1 through B4. The data are the U.S. Department of Commerce, Bureau of Economic Analysis, current-dollar GDP estimates by state. The estimates are released June of each year. For 1970 through 1996, BEA reports current-dollar GDP by state based on the Standard Industrial Classification (SIC). For 1997 forward, the BEA reports current-dollar GDP by state based on the 1997 North Ameri- can Classification System (NAICS). Given this discontinuity in the GDP by states series at 1997, users of these data are strongly cautioned against appending the two data series in an attempt to construct a single time se- ries of GDP by state

375

ConsumTechNotes2012.vp  

Gasoline and Diesel Fuel Update (EIA)

Data: Data: Consumption 31 P E T R O L E U M O V E R V I E W U.S. Energy Information Administration 32 State Energy Data: Consumption Petroleum Products Residential Sector Estimated Consumption (RC) Commercial Sector Estimated Consumption (CC) Industrial Sector Estimated Consumption (IC) Transportation Sector Estimated Consumption (AC) Electric Power Sector Estimated Consumption (EI) Total Estimated Consumption (TC) Asphalt and Road Oil (AR) ARIC = ARTC + + Aviation Gasoline (AV) AVAC = AVTC + + Distillate Fuel Oil (DF) DFRC + DFCC + DFIC + DFAC + DFEI = DFTC + + + + + + Jet Fuel (JF) JFAC JFEU = JFTC + + Kerosene (KS) KSRC + KSCC + KSIC = KSTC + + + + Liquefied Petroleum Gases (LG) LGRC + LGCC + LGIC + LGAC = LGTC + + + Lubricants (LU) + LUIC LUAC = LUTC + + + Motor Gasoline (MG) MGCC MGIC MGAC = MGTC + + + + Residual Fuel Oil (RF) RFCC RFIC + RFAC + RFEI = RFTC + + + Other Petroleum Products (PO) PCCC 1 + POIC 2 + PCEI 1 = POTC Total

376

PriceTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

Consumption Consumption Adjustments for Calculating Expenditures Expenditures developed in the EIA State Energy Data System (SEDS) are calculated by multiplying the price estimates by the SEDS consumption estimates. The consumption estimates are adjusted to remove process fuel, intermediate petroleum products, electricity exports, and other con- sumption that has no direct fuel costs, i.e., hydroelectric, geothermal, wind, solar thermal and photovoltaic energy sources, and some wood and waste. Almost all aspects of energy production, processing, and distribution con- sume energy as an inherent part of those activities. SEDS industrial and transportation sector consumption estimates include energy consumed in the process of providing energy to the end-use consumer and are called "process fuel." Familiar examples include energy sources used in drilling for oil and

377

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W. (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

1998-01-01T23:59:59.000Z

378

Industrial Process Surveillance System  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

2001-01-30T23:59:59.000Z

379

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

1998-06-09T23:59:59.000Z

380

DOE Solar Decathlon: 2007 Building Industry Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

team Puerto Rico student stands over the team's gray-water pool, which is filled with green plants, and explains to visitors surrounding the pool how it recycles water for reuse. team Puerto Rico student stands over the team's gray-water pool, which is filled with green plants, and explains to visitors surrounding the pool how it recycles water for reuse. Universidad de Puerto Rico student Wilfredo Rodriguez explains the team's gray-water pool to visitors at the 2007 Solar Decathlon. The pool is used to filter wash water for reuse. Solar Decathlon 2007 Building Industry Workshops Below are descriptions of the workshops offered at the 2007 Solar Decathlon on Building Industry Day, Thursday, October 18, 2007. Solar Applications for Homes Revised Title: Translating Sustainability to Affordable Housing 9:00 a.m. Presenter: ASHRAE and John Quale, Assistant Professor, University of Virginia School of Architecture The focus of the workshop is translating sustainability to affordable

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Review: 1991 industry developments  

Science Conference Proceedings (OSTI)

This is NUEXCO`s annual summary of the previous year`s (1991) events. There are reviews of major nuclear developments in each continent, as well as international developments. Specific topics include fuels, waste management, new facilities, and decommissioning. Nuclear activities in the following countries are noted: South Africa, Yemen, Lithuania, Latvia, Estonia, Namibia, France, Japan, Taiwan, China, Korea, India, Pakistan, Federal Republic of Germany, Spain, Hungary, Kazakhstan, Italy, Czechoslovakia, United Kingdom, Switzerland, Canada, USA, Argentina, Brazil, and Uraguay.

NONE

1992-01-01T23:59:59.000Z

382

Carbon Emissions: Food Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Food Industry Food Industry Carbon Emissions in the Food Industry The Industry at a Glance, 1994 (SIC Code: 20) Total Energy-Related Emissions: 24.4 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 6.6% Total First Use of Energy: 1,193 trillion Btu -- Pct. of All Manufacturers: 5.5% Carbon Intensity: 20.44 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 24.4 Net Electricity 9.8 Natural Gas 9.1 Coal 4.2 All Other Sources 1.3 Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998

383

Carbon Emissions: Chemicals Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Chemicals Industry Chemicals Industry Carbon Emissions in the Chemicals Industry The Industry at a Glance, 1994 (SIC Code: 28) Total Energy-Related Emissions: 78.3 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 21.1% -- Nonfuel Emissions: 12.0 MMTC Total First Use of Energy: 5,328 trillion Btu -- Pct. of All Manufacturers: 24.6% Energy Sources Used As Feedstocks: 2,297 trillion Btu -- LPG: 1,365 trillion Btu -- Natural Gas: 674 trillion Btu Carbon Intensity: 14.70 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 78.3 Natural Gas 32.1

384

Argonne CNM: Industrial Users  

NLE Websites -- All DOE Office Websites (Extended Search)

For Industrial Users For Industrial Users The Center for Nanoscale Materials (CNM) has specific interest in growing the industrial user program and encourages researchers in industry to consider the capabilities and expertise we have to offer. As a CNM user, you have easy access to sophisticated scientific instrumentation geared toward nanoscience and nanotechnology. Moreover, our widely recognized staff researchers offer support in designing your experiments, using the equipment, and analyzing your data. Access to the CNM is through peer review of user proposals. Before you submit your first user proposal, we encourage you to contact any of our staff researchers, group leaders, the User Office, or division management to discuss the feasibility of your intended research using the expertise and facilities at the CNM. We are here to serve you as part of our user community and will be happy to address any questions you might have.

385

Electric Utility Industry Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Utility Industry Update Electric Utility Industry Update Steve Kiesner Director, National Customer Markets Edison Electric Institute FUPWG Spring 2012 April 12, 2012 Edison Electric Institute ï‚› Investor-Owned Electric Companies ï‚› Membership includes ï‚› 200 US companies, ï‚› More than 65 international affiliates and ï‚› 170 associates ï‚› US members ï‚› Serve more than 95% of the ultimate customers in the investor-owned segment of the industry and ï‚› Nearly 70% of all electric utility ultimate customers, and ï‚› Our mission focuses on advocating public policy; expanding market opportunities; and providing strategic business information Agenda ï‚›Significant Industry Trends ï‚›Utility Infrastructure Investments ï‚›Generation and Fuel Landscape

386

Carbon Emissions: Paper Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Paper Industry Paper Industry Carbon Emissions in the Paper Industry The Industry at a Glance, 1994 (SIC Code: 26) Total Energy-Related Emissions: 31.6 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 8.5% Total First Use of Energy: 2,665 trillion Btu -- Pct. of All Manufacturers: 12.3% -- Pct. Renewable Energy: 47.7% Carbon Intensity: 11.88 MMTC per quadrillion Btu Renewable Energy Sources (no net emissions): -- Pulping liquor: 882 trillion Btu -- Wood chips and bark: 389 trillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 31.6 Net Electricity 11.0

387

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Former User Group Chair Enthusiastic About Relevance of Neutron Scattering Former User Group Chair Enthusiastic About Relevance of Neutron Scattering to Industrial Research Former User Group Chair Mike Crawford Mike Crawford, DuPont Research and Development. The drive is intensifying to encourage research partnerships between Neutron Sciences and private industry. Such partnerships, a long-term strategic goal set by the DOE's Basic Energy Sciences Advisory Committee, will deliver industry and its technological problems to SNS and HFIR, where joint laboratory-industry teams can use the unparalleled resources available here to resolve them. "SNS is a tremendous facility. It has the potential to have a couple of thousand user visits a year and, if they build another target station in the future, you're probably talking about 4000 user visits a year,"

388

Industrial Oil Products Division  

Science Conference Proceedings (OSTI)

A forum for professionals involved in research, development, engineering, marketing, and testing of industrial products and co-products from fats and oils, including fuels, lubricants, coatings, polymers, paints, inks, cosmetics, dielectric fluids, and ad

389

Industrial Demand Module  

Reports and Publications (EIA)

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

Kelly Perl

2013-05-14T23:59:59.000Z

390

Optimization of Industrial Enzymes  

Enzymes are highly efficient naturally occurring catalysts that are used in a wide range of applications from industrial processes to new drug development. Conventional mechanism for understanding the mechanisms of enzyme functions are costly and time ...

391

Technologies - Industrial Partnerships Office  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore National Security, LLC ...

392

Electric Power Industry Restructuring:  

U.S. Energy Information Administration (EIA)

Good morning. I was asked to speak to you today about EIA’s data collection efforts in a more competitive electric power industry. I know that you want to hear ...

393

Uranium Industry Annual, 1992  

Science Conference Proceedings (OSTI)

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

Not Available

1993-10-28T23:59:59.000Z

394

Industrial Demand Module  

Reports and Publications (EIA)

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

Kelly Perl

2013-09-30T23:59:59.000Z

395

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Hidden Stresses in Materials HTML, HFIR Team Work with Industry To Find Hidden Stresses in Materials Metalsa, EPRI, John Deere among partners in high-impact projects Whether it's...

396

Industrial Assessment Center  

SciTech Connect

The University of Dayton (UD) performed energy assessments, trained students and supported USDOE objectives. In particular, the UD Industrial Assessment Center (IAC) performed 96 industrial energy assessment days for mid-sized manufacturers. The average identified and implemented savings on each assessment were $261,080 per year and $54,790 per year. The assessments served as direct training in industrial energy efficiency for 16 UD IAC students. The assessments also served as a mechanism for the UD IAC to understand manufacturing energy use and improve upon the science of manufacturing energy efficiency. Specific research results were published in 16 conference proceedings and journals, disseminated in 22 additional invited lectures, and shared with the industrial energy community through the UD IAC website.

J. Kelly Kissock; Becky Blust

2007-04-17T23:59:59.000Z

397

Working Through Outsourcing: Software Practice, Industry Organization and Industry Evolution in India  

E-Print Network (OSTI)

Outsourcing: Software Practice, Industry Organizationand Industry Evolution in India Kyle EischenSoftware Practice, Industry Organization and Industry

Eischen, Kyle

2004-01-01T23:59:59.000Z

398

2010 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond  

SciTech Connect

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (#LA 000160 01), for the wastewater reuse site at the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from May 1, 2010 through October 31, 2010. The report contains the following information: • Facility and system description • Permit required effluent monitoring data and loading rates • Groundwater monitoring data • Status of special compliance conditions • Discussion of the facility’s environmental impacts During the 2010 partial reporting year, an estimated 3.646 million gallons of wastewater were discharged to the Industrial Waste Ditch and Pond which is well below the permit limit of 13 million gallons per year. The concentrations of all permit-required analytes in the samples from the down gradient monitoring wells were below the Ground Water Quality Rule Primary and Secondary Constituent Standards.

David B. Frederick

2011-02-01T23:59:59.000Z

399

2011 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond  

SciTech Connect

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (LA-000160-01), for the wastewater reuse site at the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from November 1, 2010 through October 31, 2011. The report contains the following information: (1) Facility and system description; (2) Permit required effluent monitoring data and loading rates; (3) Groundwater monitoring data; (4) Status of special compliance conditions; and (5) Discussion of the facility's environmental impacts. During the 2011 reporting year, an estimated 6.99 million gallons of wastewater were discharged to the Industrial Waste Ditch and Pond which is well below the permit limit of 13 million gallons per year. Using the dissolved iron data, the concentrations of all permit-required analytes in the samples from the down gradient monitoring wells were below the Ground Water Quality Rule Primary and Secondary Constituent Standards.

David Frederick

2012-02-01T23:59:59.000Z

400

PARS II Course Descriptions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptions Descriptions PARS II Course Descriptions Sign up for PARS 102 or PARS 103, depending on your project assessment role and function. PARS 104 will be offered to site contractors as part of Dekker's Contractor deployment training. # Course Name Course Description Intended Audience PARS 102 Monthly Updating and Reporting Duration: 4 hrs Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. Individuals who do not require monthly update training will be excused approximately one half hour early. FPD and Program staff who update the OA Monthly Status, but not other OA data.

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Concise descriptions of subsets of structured sets  

Science Conference Proceedings (OSTI)

We study the problem of economical representation of subsets of structured sets, that is, sets equipped with a set cover. Given a structured set U, and a language L whose expressions define subsets of U, the problem of Minimum Description ...

Alberto O. Mendelzon; Ken Q. Pu

2003-06-01T23:59:59.000Z

402

Multimedia Semantic Features and Image Content Description  

Science Conference Proceedings (OSTI)

Content-based indexing and retrieval of images and video requires a proper semantic description for image content. This paper discusses the mapping of high-level, application-specific, features to the visual primitives that are accessible through image ...

M. Cavazza; R. J. Green; I. J. Palmer

1998-10-01T23:59:59.000Z

403

Qualitatitive description : light in the urban environment  

E-Print Network (OSTI)

The quality of our built environment is difficult to describe and to regulate; using light as an example, this thesis develops a descriptive framework using elementary, dynamic and connective forms. The combination of these ...

Stuebing, Susan

1986-01-01T23:59:59.000Z

404

Individual Reuse in Description Logic Reasoning  

Science Conference Proceedings (OSTI)

Tableau calculi are the state-of-the-art for reasoning in description logics (DL). Despite recent improvements, tableau-based reasoners still cannot process certain knowledge bases (KBs), mainly because they end up building very large models. To address ...

Boris Motik; Ian Horrocks

2008-08-01T23:59:59.000Z

405

VEHICLE DETAILS, BATTERY DESCRIPTION AND SPECIFICATIONS Vehicle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 VEHICLE DETAILS, BATTERY DESCRIPTION AND SPECIFICATIONS Vehicle Details Base Vehicle: 2011 Nissan Leaf VIN: JN1AZ0CP5BT000356 Propulsion System: BEV Electric Machine: 80 kW...

406

EMERGENCY RESPONSE ORGANIZATION TRAINING PROGRAM DESCRIPTION  

SciTech Connect

This document establishes requirements for Emergency Response Organization Training. This program description applies to all Project Hanford Management Contract (PHMC) contractor and subcontractor employees who are identified to fulfill Hanford Site Emergency Response Organization (ERO) positions.

MITCHELL, L.J.

2001-06-20T23:59:59.000Z

407

Multiple-description multistage vector quantization  

Science Conference Proceedings (OSTI)

Multistage vector quantization (MSVQ) is a technique for low complexity implementation of high-dimensional quantizers, which has found applications within speech, audio, and image coding. In this paper, a multiple-description MSVQ (MD-MSVQ) targeted ...

Pradeepa Yahampath

2007-07-01T23:59:59.000Z

408

CALIPSO Lidar Description and Performance Assessment  

Science Conference Proceedings (OSTI)

This paper provides background material for a collection of Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) algorithm papers that are to be published in the Journal of Atmospheric and Oceanic Technology. It provides a brief description ...

William H. Hunt; David M. Winker; Mark A. Vaughan; Kathleen A. Powell; Patricia L. Lucker; Carl Weimer

2009-07-01T23:59:59.000Z

409

Industrial Retrofits are Possible  

E-Print Network (OSTI)

Ontario is the industrial heartland of Canada and more than 80% of its energy comes from Canadian sources with the remainder from the neighbouring U.S. states. Because of the ever increasing demand for energy relating to increased economic activity, the provincial government's major energy priority is efficiency. In April of 1987, the provincial government initiated a program to assist industrial energy users to reduce their energy usage. This program was designed to concentrate on an in-depth analysis of the complete operations of industrial plants with the analyses being performed by specialist, private sector, engineering consultants. The program is in 3 phases providing an Ontario industrial plant with an Energy Analysis, a Feasibility Analysis Grant and a Project Engineering Design Grant. In this presentation, the author will outline the results of the program to date and will attempt to share with the audience the individual case experiences. Since the program's start, the Ontario Ministry of Energy has completed over 320 energy analyses of industrial plants which had combined energy bills of over $420 million. The potential annual energy savings identified were over $40 million or 9.51%. Electricity and natural gas are the major fuels used by Ontario industries and our surveys to date have shown savings of 6% in electricity and 11% in natural gas. Over the first two years of the program, individual plants have or are intending to implement more than half of the energy analysis recommendations.

Stobart, E. W.

1990-06-01T23:59:59.000Z

410

Innovative Utility Pricing for Industry  

E-Print Network (OSTI)

The electric utility industry represents only one source of power available to industry. Although the monopolistic structure of the electric utility industry may convey a perception that an electric utility is unaffected by competition, this is an erroneous perception with regard to industry. Electric utilities face increased competition, both from other utilities and from industrial self-generation. The paper discusses competition for industrial customers and innovative pricing trends that have evolved nationally to meet the growing competition for industrial sales. Cogeneration activities and the emerging concepts of wheeling power are also discussed. Specifics of industry evaluation and reaction to utility pricing are presented. Also enumerated are examples of the response various utilities throughout the United States have made to the needs of their industrial customers through innovative rate design. Industry/utility cooperation can result in benefits to industry, to the electric utility and to all other ratepayers. This discussion includes examples of successful cooperation between industry and utilities.

Ross, J. A.

1986-06-01T23:59:59.000Z

411

ConsumTechNotes2011.vp  

Gasoline and Diesel Fuel Update (EIA)

65 65 Appendix B Thermal Conversion Factors A P P E N D I X B Table B1. Approximate Heat Content of Petroleum and Heat Rates for Electricity, Selected Years, 1960-2011 Year Petroleum Consumption Electricity Net Generation Liquefied Petroleum Gases, Industrial Sector (LGICKUS) Liquefied Petroleum Gases, All Sectors (LGTCKUS) Motor Gasoline, All Sectors (MGTCKUS) Total Petroleum Products, All Sectors a (PATCKUS) Fossil-Fueled Steam-Electric Plants b (FFETKUS) Nuclear Steam-Electric Plants (NUETKUS) Million Btu per Barrel Btu per Kilowatthour 1960 4.163 4.011 5.253 5.555 10,760 11,629 1965 4.149 4.011 5.253 5.532 10,453 11,804 1970 3.736 3.779 5.253 5.503 10,494 10,977 1975 3.645 3.715 5.253 5.494 10,406 11,013 1976 3.640 3.711 5.253 5.504 10,373 11,047 1977 3.590 3.677 5.253 5.518 10,435 10,769 1978 3.579 3.669 5.253 5.519 10,361 10,941 1979

412

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Residual Fuel Oil and No. 4 Fuel Oil Residual Fuel Oil and No. 4 Fuel Oil Definitions Key Terms Definition Gas Plant Operator Any firm, including a gas plant owner, which operates a gas plant and keeps the gas plant records. A gas plant is a facility in which natural gas liquids are separated from natural gas or in which natural gas liquids are fractionated or otherwise separated into natural gas liquid products or both. For the purposes of this survey, gas plant operator data are contained in the refiner categories. No. 4 Fuel A distillate fuel oil made by blending distillate fuel oil and residual fuel oil stocks. It conforms with ASTM Specification D 396 or Federal Specification VV-F-815C and is used extensively in industrial plants and in commercial burner installations that are not equipped with preheating facilities. It also includes No. 4 diesel fuel used for low- and medium-speed diesel engines and conforms to ASTM Specification D 975.

413

Table Definitions, Sources, and Explanatory Notes  

Gasoline and Diesel Fuel Update (EIA)

Residential and Commercial Prices by Local Distributors & Marketers Residential and Commercial Prices by Local Distributors & Marketers Definitions Key Terms Definition Commercial Price The price of gas used by nonmanufacturing establishments or agencies primarily engaged in the sale of goods or services such as hotels, restaurants, wholesale and retail stores and other service enterprises; and gas used by local, State and Federal agencies engaged in nonmanufacturing activities. Local Distribution Company (LDC) A legal entity engaged primarily in the retail sale and/or delivery of natural gas through a distribution system that includes mainlines (that is, pipelines designed to carry large volumes of gas, usually located under roads or other major right-of-ways) and laterals (that is, pipelines of smaller diameter that connect the end user to the mainline). Since the restructuring of the gas industry, the sale of gas and/or delivery arrangements may be handled by other agents, such as producers, brokers, and marketers that are referred to as "non-LDC."

414

Some Notes on Wideband Feedback Amplifiers  

DOE R&D Accomplishments (OSTI)

The extension of the passband of wideband amplifiers is a highly important problem to the designer of electronic circuits. Throughout the electronics industry and in many research programs in physics and allied fields where extensive use is made of video amplifiers, the foremost requirement is a passband of maximum width. This is necessary if it is desired to achieve a more faithful reproduction of transient wave forms, a better time resolution in physical measurements, or perhaps just a wider band gain-frequency response to sine wave signals. The art of electronics is continually faced with this omnipresent amplifier problem. In particular, the instrumentation techniques of nuclear physics require amplifiers with short rise times, a high degree of gain stability, and a linear response to high signal levels. While the distributed amplifier may solve the problems of those seeking only a wide passband, the requirements of stability and linearity necessitate using feedback circuits. This paper considers feedback amplifiers from the standpoint of high-frequency performance. The circuit conditions for optimum steady-state (sinusoidal) and transient response are derived and practical circuits (both interstage and output) are presented which fulfill these conditions. In general, the results obtained may be applied to the low-frequency end.

Fitch, V.

1949-03-16T23:59:59.000Z

415

Percentage of Total Natural Gas Industrial Deliveries included in Prices  

Gasoline and Diesel Fuel Update (EIA)

City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area May-13 Jun-13 Jul-13 Aug-13 Sep-13 Oct-13 View History U.S. 16.5 16.3 16.0 16.2 16.6 16.9 2001-2013 Alabama 22.1 21.7 21.6 22.8 22.0 22.7 2001-2013 Alaska 100.0 100.0 100.0 100.0 100.0 100.0 2001-2013 Arizona 13.4 15.7 15.3 13.8 13.7 13.9 2001-2013 Arkansas 1.7 1.4 1.2 1.4 1.3 1.5 2001-2013

416

California Industrial Energy Efficiency Potential  

E-Print Network (OSTI)

The Potential for Energy Efficiency. Prepared for The EnergyIndustrial Sector Energy Efficiency Potential Study - DraftIndustrial Energy Efficiency Market Characterization Study.

Coito, Fred; Worrell, Ernst; Price, Lynn; Masanet, Eric; Rafael Friedmann; Rufo, Mike

2005-01-01T23:59:59.000Z

417

Industrial Technologies - Energy Innovation Portal  

Industrial Technologies Marketing Summaries Here you’ll find marketing summaries of industrial technologies available for licensing from U.S. Department of Energy ...

418

EIA Electric Industry Data Collection  

U.S. Energy Information Administration (EIA)

Steam Production EIA Electric Industry Data Collection Residential Industrial ... Monthly data on cost and quality of fuels delivered to cost-of-service plants

419

NEMS industrial module documentation report  

SciTech Connect

The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

1994-01-01T23:59:59.000Z

420

The changing structure of the electric power industry: An update  

SciTech Connect

The U. S. electric power industry today is on the road to restructuring a road heretofore uncharted. While parallels can be drawn from similar journeys taken by the airline industry, the telecommunications industry, and, most recently, the natural gas industry, the electric power industry has its own unique set of critical issues that must be resolved along the way. The transition will be from a structure based on a vertically integrated and regulated monopoly to one equipped to function successfully in a competitive market. The long-standing traditional structure of the electric power industry is the result of a complex web of events that have been unfolding for over 100 years. Some of these events had far-reaching and widely publicized effects. Other major events took the form of legislation. Still other events had effects that are less obvious in comparison (e.g., the appearance of technologies such as transformers and steam and gas turbines, the invention of home appliances, the man-made fission of uranium), and it is likely that their significance in the history of the industry has been obscured by the passage of time. Nevertheless, they, too, hold a place in the underpinnings of today`s electric industry structure. The purpose of this report, which is intended for both lay and technical readers, is twofold. First, it is a basic reference document that provides a comprehensive delineation of the electric power industry and its traditional structure, which has been based upon its monopoly status. Second, it describes the industry`s transition to a competitive environment by providing a descriptive analysis of the factors that have contributed to the interest in a competitive market, proposed legislative and regulatory actions, and the steps being taken by the various components of the industry to meet the challenges of adapting to and prevailing in a competitive environment.

1996-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Energy Efficiency Fund (Electric) - Commercial and Industrial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial and Industrial Energy Efficiency Programs Energy Efficiency Fund (Electric) - Commercial and Industrial Energy Efficiency Programs Eligibility Commercial Industrial...

422

Industrial Distributed Energy: Combined Heat & Power | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial Distributed Energy: Combined Heat & Power Industrial Distributed Energy: Combined Heat & Power Information about the Department of Energy's Industrial Technologies...

423

Coldwater Board of Public Utilities - Commercial & Industrial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial & Industrial Lighting Rebate Program Coldwater Board of Public Utilities - Commercial & Industrial Lighting Rebate Program Eligibility Commercial Industrial Local...

424

Industrial Oil Products Newsletter April 2013  

Science Conference Proceedings (OSTI)

Read the Industrial Oil Products Newsletter April 2013. Industrial Oil Products Newsletter April 2013 Industrial Oil Products Newsletter April 2013 ...

425

Linear Collider Collaboration Tech Notes LCC-0062 CBP-tech Note228  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 CBP-tech Note228 May 2001 Symplectic Integrators for Nonlinear Wiggler Fields Andrzej Wolski Lawrence Berkeley National Laboratory Abstract: To achieve fast damping, the NLC Main Damping Ring uses a wiggler with high field strength, 2.15 T, and over 45 m in length. An ideal wiggler with infinitely wide pole pieces may be treated as a linear eleme nt, and has no impact on the dynamic aperture. However, the integrated nonlinear components from a real wiggler with integrated field over 100 T 2 m can be significant, and the choice of methods for studying the effects in such cases is limited at present. We present two possibilities for symplectic tracking through a wiggler taking full account of the nonlinear components of the field, compare the results with

426

Transport Policy Note-Bangladesh | Open Energy Information  

Open Energy Info (EERE)

Note-Bangladesh Note-Bangladesh Jump to: navigation, search Name Transport Policy Note-Bangladesh Agency/Company /Organization Government of Bangladesh Sector Energy Focus Area Transportation Topics Implementation, GHG inventory, Policies/deployment programs, Background analysis Website http://siteresources.worldbank Program Start 2009 Country Bangladesh UN Region South-Eastern Asia References Bangladesh-Transportation[1] Abstract "This policy note provides an overview of the main characteristics of the transport sector in Bangladesh and the challenges going forward. It also provides guidance to the Bank in its dialogue with the Government of Bangladesh on the strategic priorities in the sector and the areas where the Bank can provide the most support consistent with the overall strategic

427

Notes from the Call | OpenEI Community  

Open Energy Info (EERE)

Notes from the Call Notes from the Call Home > Groups > Linked Open Data Workshop in Washington, D.C. Jweers's picture Submitted by Jweers(83) Contributor 27 September, 2012 - 17:57 notes Here's my notes from the call this morning. Some confusion about the date. NREL to confirm room reservation and details. Hotels - Availability? Book soon! General Ideas We would prefer an afternoon event, especially on Monday. Start around 1pm, and do a cocktail hour or mid-afternoon snack. Allow a good amount of time for networking in the middle of the event. Keynote Speaker? Can we get another speaker as good as Ndemo, but focused on energy? What does LOD mean to him? To what extent do we want to focus people on energy issues? Possible Speakers: Jeanne Holm - Data.gov. Bernadete Hyland - 3 Round Stones

428

NERSC Users Group Meeting Nov. 15, 1999 Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes Notes Notes ERSUG Meeting Summary Notes, November 15, 1999 Here are some highlights from the discussions (excepting the items contributed by ERSUG Chair, Bas Bramms below): During the state of NERSC presentation by Jim Craw a primary topic of discussion was the issue of the processing capabilities of the PVP cluster. Since the upgrade of the batch system processors to SV1s, some concern has been expressed about the relatively poorer processing capabilities of the J90SE processors on the interactive Killeen system. Naturally everybody would prefer having all the processors on Killeen also upgraded to SV1s. This would both make the system more uniform (upcoming compiler releases are expected to diverge with more optimization in place for the SV1s) and performance would be improved (especially important to 2-3 groups).

429

A Note on Gandin and Murphy's Equitable Skill Score  

Science Conference Proceedings (OSTI)

Gandin and Murphy introduced an “equitable skill score” for use in evaluating categorical forecasts. For forecasts involving more than two categories, the elements of the scoring matrix are not defined uniquely. In this note, a specific formula ...

Joseph P. Gerrity Jr.

1992-11-01T23:59:59.000Z

430

Renewable Energy Working Group- Summary Notes 5-2-2012  

Energy.gov (U.S. Department of Energy (DOE))

Meeting minutes describes the Renewable Energy Working Group summary notes from the Open Webinar Meeting on May 2, 2012 from 2:30 p.m. – 3:30 p.m.

431

Energy Prices Note 4. Crude Oil Landed Costs.  

U.S. Energy Information Administration (EIA)

Energy Prices Note 1. Crude Oil Refinery Acquisition Costs. Begin-ning with January 1981, refiner acquisition costs of crude oil are from data collected on U.S ...

432

Microsoft Word - Energ-Water Issue Notes.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

0 0 0 7 7 7 N N N o o o . . . 2 2 2 NETL: Erik Shuster September 26, 2007 Topic Energywater issues Objective The objective of this issue note is to explore future impacts and...

433

DOE-EERE Durability Working Group Meeting Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE-EERE Durability Working Group (DWG) Meeting Thursday, October 13, 2011 Boston, MA Meeting Notes D. Myers and R. Borup Meeting Agenda 6:30 pm Welcome and introductory comments...

434

Combating terrorism insurgency resolution software: a research note  

Science Conference Proceedings (OSTI)

This is a research note to propose the development of a combating terrorism (CbT) insurgency resolution software that would operationalize and visualize all the processes involved in resolving terrorist-type insurgencies, including metrics for measures ...

Joshua Sinai

2006-05-01T23:59:59.000Z

435

SLAC National Accelerator Laboratory - Chi-Chang Kao, Noted X...  

NLE Websites -- All DOE Office Websites (Extended Search)

Press Release Archive Chi-Chang Kao, Noted X-ray Scientist, Named SLAC Director October 24, 2012 Stanford University press release Chi--Chang Kao, an associate laboratory director...

436

A Note on Parabolic Subgroups of a Coxeter Group  

E-Print Network (OSTI)

The aim of this note is to prove that the parabolic closure of any subset of a Coxeter group is a parabolic subgroup. To obtain that, several technical lemmas on the root system of a parabolic subgroup are established.

Dongwen Qi

2008-01-01T23:59:59.000Z

437

ET Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ET Industries, Inc. ET Industries, Inc. (showerheads) Issued: May 24, 2013 BEFORE THE U.S. DEPARTMENT OF ENERGY Washington, D.C. 20585 ) ) ) ) ) Case Number: 2012-SE-2902 AMENDED NOTICE OF NONCOMPLIANCE DETERMINATION 1 Manufacturers (including importers) are prohibited from distributing covered products in the United States that do not comply with applicable federal water conservation standards. See 10 C.F.R. §§ 429.5, 429.102; 42 U.S.C. §§ 6291(10), 6302. On April 3, 2012, DOE tested one unit of the "ThunderHead" showerhead basic model ("basic model TH-1 " 2 ), which ET Industries, Inc. ("ET") imported into the United States. On April 24, 2012, DOE completed testing of three additional units of basic model TH-1, also imported into

438

Industrial lighting handbook  

SciTech Connect

Technological advances in industrial lighting system components now make it possible to reduce lighting system consumption by up to 50% or more without loss of the benefits inherent in good quality electric illumination. Management involvement in decisions about industrial lighting is essential, however, and this document provides generalized information in lay terms to help decision-makers become familiar with the concerns that affect industrial environment and the financial well-being of their companies. The five sections (1) discuss the benefits of good lighting, (2) review certain major lighting issues and terms, (3) identify procedures for developing a lighting energy management plan, (4) identify lighting energy management options (LEMOs), and (5) discuss sources of assistance. 19 figures, 8 tables.

1985-01-01T23:59:59.000Z

439

Notes on Technical Writing The University of Texas at Austin  

E-Print Network (OSTI)

, not wordy 2. Concrete, not vague 3. Down-to-earth, not esoteric or "ultracompact" Notes on Technical Writing on Technical Writing ­ p.11/44 #12;Down-to-earth vs. esoteric · Antipodal diodic phase demodulator · Two diodes with a purpose. . . Notes on Technical Writing ­ p.12/44 #12;Down-to-earth vs. esoteric · It is interesting

Aziz, Adnan

440

Nuclear Maintenance Applications Center: Lube Notes Compilation, 1989-2007  

Science Conference Proceedings (OSTI)

Proper equipment lubrication is a necessity for trouble-free operation in both nuclear and fossil power plants. In 1989, EPRI's Nuclear Maintenance Applications Center (NMAC) began publishing Lube Notes biannually. The intent of the newsletter was to address common lubrication issues and provide assistance to plant maintenance personnel. Lubrication topics vary from component-specific case studies to generic testing analysis. This report compiles all of the Lube Notes published from 1989 through 2007. In...

2007-12-21T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

China's Industrial Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

China's Industrial Energy China's Industrial Energy Consumption Trends and Impacts of the Top-1000 Enterprises Energy- Saving Program and the Ten Key Energy-Saving Projects Jing Ke, Lynn Price, Stephanie Ohshita, David Fridley, Nina Khanna, Nan Zhou, Mark Levine China Energy Group Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Reprint version of journal article published in "Energy Policy", Volume 50, Pages 562-569, November 2012 October 2012 This work was supported by the China Sustainable Energy Program of the Energy Foundation through the U.S. Department of Energy under Contract No. DE-AC02- 05CH11231. ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY

442

Natural Gas Industrial Price  

Gasoline and Diesel Fuel Update (EIA)

Citygate Price Residential Price Commercial Price Industrial Price Electric Power Price Gross Withdrawals Gross Withdrawals From Gas Wells Gross Withdrawals From Oil Wells Gross Withdrawals From Shale Gas Wells Gross Withdrawals From Coalbed Wells Repressuring Nonhydrocarbon Gases Removed Vented and Flared Marketed Production NGPL Production, Gaseous Equivalent Dry Production Imports By Pipeline LNG Imports Exports Exports By Pipeline LNG Exports Underground Storage Capacity Gas in Underground Storage Base Gas in Underground Storage Working Gas in Underground Storage Underground Storage Injections Underground Storage Withdrawals Underground Storage Net Withdrawals Total Consumption Lease and Plant Fuel Consumption Pipeline & Distribution Use Delivered to Consumers Residential Commercial Industrial Vehicle Fuel Electric Power Period: Monthly Annual

443

INDUSTRIAL ASSESSMENT CENTER PROGRAM  

Science Conference Proceedings (OSTI)

Since its establishment in 1990, San Diego State University’s Industrial Assessment Center (IAC) has served close to 400 small and medium-sized manufacturing plants in Southern California. SDSU/IAC’s efforts to transfer state-of-the-art technologies to industry have increased revenues, cultivated creativity, improved efficiencies, and benefited the environment. A substantial benefit from the program has been the ongoing training of engineering faculty and students. During this funding cycle, SDSU/IAC has trained 31 students, 7 of the graduate. A total of 92 assessments and 108 assessment days were completed, resulting in 638 assessment recommendations.

ASFAW BEYENE

2008-09-29T23:59:59.000Z

444

Industrial Assessment Center  

SciTech Connect

Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

Dr. Diane Schaub

2007-03-05T23:59:59.000Z

445

Solar industrial process heat  

DOE Green Energy (OSTI)

The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

Lumsdaine, E.

1981-04-01T23:59:59.000Z

446

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report  

Science Conference Proceedings (OSTI)

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01T23:59:59.000Z

447

Some Notes on Wideband Feedback Amplifiers  

SciTech Connect

The extension of the passband of wideband amplifiers is a highly important problem to the designer of electronic circuits. Throughout the electronics industry and in many research programs in physics and allied fields where extensive use is made of video amplifiers, the foremost requirement is a passband of maximum width. This is necessary if it is desired to achieve a more faithful reproduction of transient wave forms, a btter time resolution in physical measurements, or perhaps just a wider band gain-frequency response to sine wave signals. The art of electronics is continually faced with this omnipresent amplifier problem. In particular, the instrumentation techniques of nuclear physics require amplifiers with short rise times, a high degree of gain stability, and a linear response to high signal levels. While the distributed amplifier{sup 1} may solve the problems of those seeking only a wide passband, the requirements of stability and linearity necessitate using feedback circuits. This paper considers feedback amplifiers from the standpoint of high-frequency performance. The circuit conditions for optimum steady-state (sinusoidal) and transient response are derived and practical circuits (both interstage and output) are presented which fulfill these conditions. In general, the results obtained may be applied to the low-frequency end. The fundamental limitation in feedback amplifiers arises from the over-all phase shift in the amplifier and in some cases, the feedback circuit as well. As the shift in phase approaches 180 degrees on either side of the mid-band, the feedback becomes positive, resulting in regeneration and possible oscillation. The relationships between attenuation and phase shift necessary for amplifier stability have been formulated and published{sup 2}. It is the phase shift and its attendant difficulties that make feeback over more than three stages impractical for video amplifiers; and while three-tube feedback{sup 3} is feasible on theoretical grounds, it is difficult to design practical circuits which use the feedback to the best advantage. Fig. 1 shows two of the most satisfactory three-tube feedback loops which have been used for video purposes. The circuit in Fig. 1a accomplishes the feeback through the common plate impedance of T{sub 1}. The one serious shortcoming of this circuit is that the gain of T{sub 1} is not stabilized. This tube merely serves to drive the feedback loop encompassing T{sub 2},T{sub 3}, and T{sub 4}. For this reason the circuit is inadequate when used in those applications where the virtues of feedback; e.g., stability, linearity, are required.

Fitch, V.

1949-03-16T23:59:59.000Z

448

Property:IndustrialAvgRate | Open Energy Information  

Open Energy Info (EERE)

IndustrialAvgRate IndustrialAvgRate Jump to: navigation, search Property Name IndustrialAvgRate Property Type Number Description Industrial Average Rate Subproperties This property has the following 279 subproperties: A AEP Generating Company AEP Texas Central Company AEP Texas North Company AES Eastern Energy LP APN Starfirst, L.P. Accent Energy Holdings, LLC Alabama Municipal Elec Authority Alaska Electric & Energy Coop Alaska Energy Authority Alaska Power and Telephone Co Allegheny Electric Coop Inc Alliant Energy Ameren Energy Marketing Ameren Illinois Company American Electric Power Co., Inc. American Mun Power-Ohio, Inc American Samoa Power Authority American Transmission Systems Inc Anoka Electric Coop Appalachian Power Co Aquila Inc Aquila Inc (Missouri) Arizona Electric Pwr Coop Inc

449

Defense Office of Hearings & Appeals Decisions- Industrial Security  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 Law Data/Tools Law You are here Data.gov » Communities » Law » Data Defense Office of Hearings & Appeals Decisions- Industrial Security Clearance Decisions-2002 Dataset Summary Description adjudication of security clearance cases for contractor personnel Tags {"security clearance","national security","defense industry","defense contractor"} Dataset Ratings Overall 0 No votes yet Data Utility 0 No votes yet Usefulness 0 No votes yet Ease of Access 0 No votes yet Dataset Additional Information Last Updated 05/09/2011 Publisher Department of Defense Contact Name Contact Email dohastatus@osdgc.osd.mil Unique Identifier DOD-4451 Public Access Level public Data Dictionary http://www.dod.gov/dodgc/doha/industrial/ Data Download URL http://www.dod.gov/dodgc/doha/industrial/2002

450

Defense Office of Hearings & Appeals Decisions- Industrial Security  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 Law Data/Tools Law You are here Data.gov » Communities » Law » Data Defense Office of Hearings & Appeals Decisions- Industrial Security Clearance Decisions-2006 Dataset Summary Description adjudication of security clearance cases for contractor personnel Tags {"security clearance","national security","defense industry","defense contractor"} Dataset Ratings Overall 0 No votes yet Data Utility 0 No votes yet Usefulness 0 No votes yet Ease of Access 0 No votes yet Dataset Additional Information Last Updated 05/13/2011 Publisher Department of Defense Contact Name Contact Email dohastatus@osdgc.osd.mil Unique Identifier DOD-4455 Public Access Level public Data Dictionary http://www.dod.gov/dodgc/doha/industrial/ Data Download URL http://www.dod.gov/dodgc/doha/industrial/2006

451

Defense Office of Hearings & Appeals Decisions- Industrial Security  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Law Data/Tools Law You are here Data.gov » Communities » Law » Data Defense Office of Hearings & Appeals Decisions- Industrial Security Clearance Decisions-2003 Dataset Summary Description adjudication of security clearance cases for contractor personnel Tags {"security clearance","national security","defense industry","defense contractor"} Dataset Ratings Overall 0 No votes yet Data Utility 0 No votes yet Usefulness 0 No votes yet Ease of Access 0 No votes yet Dataset Additional Information Last Updated 05/10/2011 Publisher Department of Defense Contact Name Contact Email dohastatus@osdgc.osd.mil Unique Identifier DOD-4452 Public Access Level public Data Dictionary http://www.dod.gov/dodgc/doha/industrial/ Data Download URL http://www.dod.gov/dodgc/doha/industrial/2003

452

Defense Office of Hearings & Appeals Decisions- Industrial Security  

NLE Websites -- All DOE Office Websites (Extended Search)

8 8 Law Data/Tools Law You are here Data.gov » Communities » Law » Data Defense Office of Hearings & Appeals Decisions- Industrial Security Clearance Decisions-2008 Dataset Summary Description adjudication of security clearance cases for contractor personnel Tags {"security clearance","national security","defense industry","defense contractor"} Dataset Ratings Overall 0 No votes yet Data Utility 0 No votes yet Usefulness 0 No votes yet Ease of Access 0 No votes yet Dataset Additional Information Last Updated 05/15/2011 Publisher Department of Defense Contact Name Contact Email dohastatus@osdgc.osd.mil Unique Identifier DOD-4457 Public Access Level public Data Dictionary http://www.dod.gov/dodgc/doha/industrial/ Data Download URL http://www.dod.gov/dodgc/doha/industrial/2008

453

The US petroleum refining industry in the 1980's  

SciTech Connect

As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.

Not Available

1990-10-11T23:59:59.000Z

454

Defense Office of Hearings & Appeals Decisions- Industrial Security  

NLE Websites -- All DOE Office Websites (Extended Search)

10 10 Law Data/Tools Law You are here Data.gov » Communities » Law » Data Defense Office of Hearings & Appeals Decisions- Industrial Security Clearance Decisions-2010 Dataset Summary Description adjudication of security clearance cases for contractor personnel Tags {"security clearance","national security","defense industry","defense contractor"} Dataset Ratings Overall 0 No votes yet Data Utility 0 No votes yet Usefulness 0 No votes yet Ease of Access 0 No votes yet Dataset Additional Information Last Updated 05/17/2011 Publisher Department of Defense Contact Name Contact Email dohastatus@osdgc.osd.mil Unique Identifier DOD-4459 Public Access Level public Data Dictionary http://www.dod.gov/dodgc/doha/industrial/ Data Download URL http://www.dod.gov/dodgc/doha/industrial/2010

455

Business Case Slide 29: High-Value: Energy Uses - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Uses - Description Previous Slide Next Slide Table of Contents High-Value: Energy Uses - Description Description Use DUO2 as the core component of advanced energy systems Fuel cell...

456

A survey of temporal extensions of description logics  

Science Conference Proceedings (OSTI)

This paper surveys the temporal extensions of description logics appearearing in the literature. The analysis considers a large spectrum of approaches appearearing in the temporal description logics area: from the loosely coupled approaches – which ... Keywords: description logics, temporal logics

Alessandro Artale; Enrico Franconi

2001-03-01T23:59:59.000Z

457

Natural Gas Industrial Price  

U.S. Energy Information Administration (EIA) Indexed Site

Monthly Annual Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area 2007 2008 2009 2010 2011 2012 View History U.S. 7.68 9.65 5.33 5.49 5.13 3.89 1997-2012 Alabama 8.70 10.57 6.48 6.64 5.57 4.35 1997-2012 Alaska 4.67 5.49 4.02 4.23 3.84 5.11 1997-2012 Arizona 10.49 10.47 8.19 7.54 6.86 5.78 1997-2012 Arkansas 9.51 10.56 8.44 7.28 7.44 6.38 1997-2012 California 9.07 10.80 6.56 7.02 7.04 5.77 1997-2012 Colorado 7.21 8.76 6.57 5.84 6.42 5.79 1997-2012 Connecticut 10.54 12.63 8.44 9.60 9.16 8.83 1997-2012 Delaware 8.93 12.54 13.99 10.18 11.69 11.61 1997-2012 District of Columbia -- -- -- -- -- -- 2001-2012

458

Natural Gas Industrial Price  

Gasoline and Diesel Fuel Update (EIA)

Monthly Annual Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area 2007 2008 2009 2010 2011 2012 View History U.S. 7.68 9.65 5.33 5.49 5.13 3.89 1997-2012 Alabama 8.70 10.57 6.48 6.64 5.57 4.35 1997-2012 Alaska 4.67 5.49 4.02 4.23 3.84 5.11 1997-2012 Arizona 10.49 10.47 8.19 7.54 6.86 5.78 1997-2012 Arkansas 9.51 10.56 8.44 7.28 7.44 6.38 1997-2012 California 9.07 10.80 6.56 7.02 7.04 5.77 1997-2012 Colorado 7.21 8.76 6.57 5.84 6.42 5.79 1997-2012 Connecticut 10.54 12.63 8.44 9.60 9.16 8.83 1997-2012 Delaware 8.93 12.54 13.99 10.18 11.69 11.61 1997-2012 District of Columbia -- -- -- -- -- -- 2001-2012

459

Industrial Partnerships | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Carbon Fiber Consortium Manufacturing Industrial Partnerships Staff University Partnerships Events and Conferences Success Stories Video Newsletters Staff Contacts Partnerships Home | Connect with ORNL | For Industry | Partnerships | Industrial Partnerships SHARE Industrial Partnerships ORNL takes great pride in its work with U.S. industry. Each year, the Industrial Partnerships team hosts more than 100 visits to ORNL by both large corporations and small companies to help our potential partners understand the capabilities and expertise that exist at the laboratory and the various mechanisms available to help facilitate collaboration. Mechanism for Partnering How do I get started exploring industrial partnerships at ORNL? As the nation's largest science and energy laboratory, it can sometimes be

460

Microsoft Word - HQ ISM System Description Final  

National Nuclear Security Administration (NNSA)

NA-1 SD 450.4-1 NA-1 SD 450.4-1 Approved: 10-23-07 National Nuclear Security Administration Headquarters Integrated Safety Management System Description This NNSA Headquarters Integrated Safety Management System Description describes the NNSA Headquarters role in establishing expectations and accomplishing work in a safe and environmentally sound manner to successfully execute the NNSA mission and strategic goals. NNSA senior managers strongly support and are personally committed to implementation of the policy and principles of Integrated Safety Management. Approved: &? .> ,& o & k Thomas P. D7Ago, tino Administrator h Table of Contents EXECUTIVE SUMMARY .............................................................................................................

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Void fraction system computer software design description  

DOE Green Energy (OSTI)

This document describes the software that controls the void fraction instrument. The format of the document may differ from typical Software Design Reports because it was created with a graphical programming language. Hardware is described in Section 2. The purpose of this document is describe the software, so the hardware description is brief. Software is described in Section 3. LabVIEW was used to develop the viscometer software, so Section 3 begins with an introduction to LabVIEW. This is followed by a description of the main program. Finally each Westinghouse developed subVI (sub program) is discussed.

Gimera, M.

1995-02-15T23:59:59.000Z

462

COURSE NOTES: ViMS: Visualizations in Materials Science ... - TMS  

Science Conference Proceedings (OSTI)

Feb 10, 2007 ... This web resource offers a detailed description of an interactive and graphics- based sophomore level introductory materials science course ...

463

INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER  

SciTech Connect

The U. S. Department of Energy’s Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

MELINDA KRAHENBUHL

2010-05-28T23:59:59.000Z

464

Industrial cogeneration optimization program  

SciTech Connect

The purpose of this program was to identify up to 10 good near-term opportunities for cogeneration in 5 major energy-consuming industries which produce food, textiles, paper, chemicals, and refined petroleum; select, characterize, and optimize cogeneration systems for these identified opportunities to achieve maximum energy savings for minimum investment using currently available components of cogenerating systems; and to identify technical, institutional, and regulatory obstacles hindering the use of industrial cogeneration systems. The analysis methods used and results obtained are described. Plants with fuel demands from 100,000 Btu/h to 3 x 10/sup 6/ Btu/h were considered. It was concluded that the major impediments to industrial cogeneration are financial, e.g., high capital investment and high charges by electric utilities during short-term cogeneration facility outages. In the plants considered an average energy savings from cogeneration of 15 to 18% compared to separate generation of process steam and electric power was calculated. On a national basis for the 5 industries considered, this extrapolates to saving 1.3 to 1.6 quads per yr or between 630,000 to 750,000 bbl/d of oil. Properly applied, federal activity can do much to realize a substantial fraction of this potential by lowering the barriers to cogeneration and by stimulating wider implementation of this technology. (LCL)

1980-01-01T23:59:59.000Z

465

Industrial Assessment Center  

SciTech Connect

This project involved providing technical assistance to help small and medium size industries in Wisconsin to reduce operating costs by managing energy, waste and productivity. The project helped save 525 companies on average about $40,000 per year. Under the direction of Dr. Saxena, more than twenty undergraduate and ten graduate students were trained in energy, waste, and productivity management.

Umesh K. Saxena

2009-06-04T23:59:59.000Z

466

Synfuels industry opportunities  

SciTech Connect

Presentations made at the seminar are included in this volume. The present state in the development of synthetic fuels and the creation of the Synthetic Fuels Corporation are discussed by representatives of federal agencies and private industry. Separate abstracts of individual items were prepared for inclusion in the Energy Data Base and Energy Abstracts for Policy Analysis. (DMC)

Hill, R.F.; Boardman, E.B.; Heavner, M.L. (eds.)

1981-01-01T23:59:59.000Z

467

Turning industry visions into reality  

Science Conference Proceedings (OSTI)

This brochure outlines the activities of the Office of Industrial Technologies (OIT) in the Department of Energy. OIT activities are aimed at industry adoption of energy-efficient, pollution-reducing technologies and include research and development on advanced technologies, financing, technical assistance, information dissemination, education, and bringing together industry groups, universities, National Laboratories, states, and environmentalists. OIT`s core initiative is to facilitate partnerships within seven materials and process industries: aluminum, chemicals, forest products, glass, metalcasting, petroleum refining, and steel industries.

NONE

1997-01-01T23:59:59.000Z

468

Business Case Slide 6: High-Volume: Repository - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Volume: Repository - Description Description of potential uses Structural component of cask (basket, wall) as a cermet Cermet: DUO2 particles embedded in steel matrix Fill material...

469

Business Case Slide 22: High-Value: Catalysts - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysts - Description Graduate student examining candidate DU-bearing catalyst Graduate student examining candidate DU-bearing catalyst Description Use DUO2 to catalyze chemical...

470

Microsoft Word - 338M_Geothermal_Project_Descriptions | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marketing Administration Other Agencies You are here Home Microsoft Word - 338MGeothermalProjectDescriptions Microsoft Word - 338MGeothermalProjectDescriptions Microsoft...

471

Industrial battery stack  

SciTech Connect

A novel industrial battery stack is disclosed, wherein positive plates which have been longitudinally wrapped with a perforate or semi-perforate material are accurately aligned with respect to the negative plates and separators in the stack during the stacking operation. The novel spacing members of the present invention have a generally U-shaped cross section for engaging through the wrapping a portion of the positive plate adjacent to the longitudinal edges of that plate. Projections protruding substantially from the base of the ''U'' provide the proper distance between the edge of the wrapped plate and an adjacent longitudinal surface. During the stacking and burning operation, this longitudinal surface comprises the back wall of a novel industrial battery plate holder. Following the burning of the battery stack and its subsequent assembly into an appropriate industrial battery case, the spacing member or members act to protect the positive battery plates and retain them in their proper alignment during the operation of the battery. Applicants have also provided a novel apparatus and method for stacking, aligning and burning industrial battery stacks which comprises a battery stack holder having several upstanding walls which define a stacking column having a coplanar terminus. An adjustably locatable partition within said stacking column may be disposed at any of a plurality of positions parallel with respect to the coplanar terminus so that the battery stack holder may be adjusted for any of a variety of given sizes of plates and separators. The battery plates and separators may then be stacked into the battery stack holder so that only the plate lugs extrude beyond the coplanar terminus. A dam is insertable along the top of the battery plates and across the top of the upstanding side walls of the battery stack holder to facilitate the rapid efficient burning of the industrial battery stack.

Digiacomo, H.L.; Sacco, J.A.

1980-08-19T23:59:59.000Z

472

Industrial hygiene concerns associated with oil shale development  

SciTech Connect

Health protection concerns (including industrial hygiene, safety, and occupational medicine) must be evaluated to insure that development of the oil shale industry proceeds without significant risk to the health of the workers involved. These concerns need to be identified in the early stages of developing this industry. To provide a basis for discussing potential health protection concerns related to oil shale, it is necessary to briefly discuss the magnitude and characteristics of this resource; the alternate proposed technologies; and the unit operations which make up the operating system. This subject has been detailed in many publications, among them reports prepared for the Environmental Protection Agency. This discussion will be limited to providing sufficient background to put industrial hygiene and other health protection concerns in perspective, and will include a brief description of typical technologies under consideration. It will not provide a detailed description of these technologies, or attempt to cover all the alternate technologies which may be applied to the development of oil shale. However, a basis for considering potential health protection problems associated with development of this industry will be established.

Ettinger, H.J.

1980-01-01T23:59:59.000Z

473

Methods in industrial biotechnology for chemical engineers  

E-Print Network (OSTI)

In keeping with the definition that biotechnology is really no more than a name given to a set of techniques and processes, the authors apply some set of fuzzy techniques to chemical industry problems such as finding the proper proportion of raw mix to control pollution, to study flow rates, to find out the better quality of products. We use fuzzy control theory, fuzzy neural networks, fuzzy relational equations, genetic algorithms to these problems for solutions. When the solution to the problem can have certain concepts or attributes as indeterminate, the only model that can tackle such a situation is the neutrosophic model. The authors have also used these models in this book to study the use of biotechnology in chemical industries. This book has six chapters. First chapter gives a brief description of biotechnology. Second chapter deals will proper proportion of mix of raw materials in cement industries to minimize pollution using fuzzy control theory. Chapter three gives the method of determination of te...

Kandasamy, W B Vasantha

2008-01-01T23:59:59.000Z

474

Description of master thesis Robotic transportation  

E-Print Network (OSTI)

Description of master thesis Robotic transportation Jan Holdgaard-Thomsen & Søren Markersen In hospitals a significant amount of resources is spent on transportation of goods, e.g. blood samples, medicine, food, and trash. Usually these transportation tasks are carried out by humans. A current research

Bolander, Thomas

475

Beth definability in expressive description logics  

Science Conference Proceedings (OSTI)

The Beth definability property, a well-known property from classical logic, is investigated in the context of description logics (DLs): if a general LTBox implicitly defines an L-concept in terms of a given signature, where L is a DL, then does there ...

Balder Ten Cate; Enrico Franconi; ?nanç Seylan

2011-07-01T23:59:59.000Z

476

Dry Ice vs. Pipette Experiment Description  

E-Print Network (OSTI)

Dry Ice vs. Pipette Experiment Description Dry ice (solid) is put into the bulb of a pipette, plastic pipette 1 ice cube sized piece of dry ice Butter knife (or some object to break dry ice) Gloves (surgical gloves will not work, they must protect hands from dry ice) Safety glasses for demonstrator

477

Latent semantic description of iconic scenes  

Science Conference Proceedings (OSTI)

It is proposed an approach for the automatic description of scenes using a LSA–like technique. The described scenes are composed by a set of elements that can be geometric forms or iconic representation of objects. Every icon is characterized by ...

Filippo Vella; Giovanni Pilato; Giorgio Vassallo; Salvatore Gaglio

2005-10-01T23:59:59.000Z

478

Industrial Technologies Success Stories - Energy Innovation Portal  

Bookmark Industrial Technologies Success Stories - Energy Innovation Portal on Google; Bookmark Industrial Technologies Success Stories ...

479

Industrial Energy Procurement Contracts  

E-Print Network (OSTI)

Rates are going down and services are improving! Or are they? As opportunities to directly contract for energy expand from the larger industrials to include mid-market companies, existing energy supply and service contracts will be renegotiated and new ones developed. Many of these mid-level industrial customers typically lack in-house expertise on energy procurement, yet their operations use significant amounts of energy. This paper looks at some of the issues involved in the main terms of a procurement contract, as well as issues in contract formation and termination. Finally the paper reviews some of the recent energy aggregation and outsourcing deals to highlight some that worked and some that didn't.

Thompson, P.; Cooney, K.

2000-04-01T23:59:59.000Z

480

REGULATING HAWAII'S PETROLEUM INDUSTRY  

E-Print Network (OSTI)

This study was prepared in response to House Resolution No. 174, H.D. 2, which was adopted during the Regular Session of 1995. The Resolution requested the Legislative Reference Bureau to conduct a study to obtain the views of selected state agencies and representatives of Hawaii's petroleum industry in order to assist the Legislature in formulating policies that protect the interests of Hawaii's gasoline consumers. The Resolution sought information and the views of survey participants on a broad range of proposals to regulate Hawaii's petroleum industry. This study reviews each of these proposals in terms of their value to consumers, and explores both regulatory policy options and alternatives to regulation available to state lawmakers. The Bureau extends its sincere appreciation to all those whose participation and cooperation made this study possible. A list of contact persons, including the names of survey participants and others who helped to contribute to this study, is contained in Appendix B.

Mark J. Rosen; Wendell K. Kimura

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description note" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Coal industry annual 1993  

Science Conference Proceedings (OSTI)

Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

Not Available

1994-12-06T23:59:59.000Z

482

Coal industry annual 1997  

Science Conference Proceedings (OSTI)

Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

NONE

1998-12-01T23:59:59.000Z

483

Industrial Facilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial Facilities Industrial Facilities Industrial Facilities October 8, 2013 - 10:14am Addthis The Federal Energy Management Program (FEMP) encourages Federal agencies requiring assistance with implementing energy-efficiency measures in their industrial facilities to hire a U.S. Department of Energy Industrial Assessment Center (IAC) for assessment services. The following resources can be used to plan and implement industrial facility energy-efficiency projects. Technical Publications: The Advanced Manufacturing Office (AMO) website offers fact sheets, handbooks, and self-assessment manuals covering steam system efficiency, fundamentals of compressed air systems, motor systems management, and other topics. Tools: The AMO website offers valuable software tools for evaluating

484

Evolution of industrial automation  

Science Conference Proceedings (OSTI)

Automation has been of high priority for the manufacturing sector, from Ford's first set of Model-T Assembly lines in the early 1920s to the modern factory floor. With appropriate automation, the aim was to rationalise the production and keep ... Keywords: Ethernet, architecture, automated manufacturing, bus topology, control servers, distributed control, economies of scale, embedded intelligence, functionality, fuzzy logic, global village, graphic panel, industrial automation, networking, networks

R. Murugesan

2006-03-01T23:59:59.000Z

485

Industrial - Utility Cogeneration Systems  

E-Print Network (OSTI)

Cogeneration may be described as an efficient method for the production of electric power in conjunction with process steam or heat which optimizes the energy supplied as fuel to maximize the energy produced for consumption. In a conventional electric utility power plant, considerable energy is wasted in the form of heat rejection to the atmosphere thru cooling towers, ponds or lakes, or to rivers. In a cogeneration system heat rejection can be minimized by systems which apply the otherwise wasted energy to process systems requiring energy in the form of steam or heat. Texas has a base load of some 75 million pounds per hour of process steam usage, of which a considerable portion could be generated through cogeneration methods. The objective of this paper is to describe the various aspects of cogeneration in a manner which will illustrate the energy saving potential available utilizing proven technology. This paper illustrates the technical and economical benefits of cogeneration in addition to demonstrating the fuel savings per unit of energy required. Specific examples show the feasibility and desirability of cogeneration systems for utility and industrial cases. Consideration of utility-industrial systems as well as industrial-industrial systems will be described in technical arrangement as well as including a discussion of financial approaches and ownership arrangements available to the parties involved. There is a considerable impetus developing for the utilization of coal as the energy source for the production of steam and electricity. In many cases, because of economics and site problems, the central cogeneration facility will be the best alternative for many users.

Harkins, H. L.

1979-01-01T23:59:59.000Z

486

Transforming the Oil Industry into the Energy Industry  

E-Print Network (OSTI)

Transforming the Oil Industry into the Energy Industry BYculprit. It consumes half the oil used in the world andconsuming two thirds of the oil and causing about one third

Sperling, Daniel; Yeh, Sonia

2009-01-01T23:59:59.000Z

487

Industrial Energy Use Indices  

E-Print Network (OSTI)

Energy use indices and associated coefficients of variation are computed for major industry categories for electricity and natural gas use in small and medium-sized plants in the U.S. Standard deviations often exceed the average EUI for an energy type, with coefficients of variation averaging 290% for 8,200 plants from all areas of the continental U.S. Data from milder climates appears more scattered than that from colder climates. For example, the ratio of the average of coefficient of variations for all industry types in warm versus cold regions of the U.S. generally is greater than unity. Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used in the south of the U.S. This analysis uses electricity and natural gas energy consumption and area data of manufacturing plants available in the U.S. Department of Energy’s national Industrial Assessment Center database.

Hanegan, A.; Heffington, W. M.

2007-01-01T23:59:59.000Z

488

Commercial & Industrial Renewable Energy Grants  

Energy.gov (U.S. Department of Energy (DOE))

'''''Note: The deadline for the most-recent round of funding under this program, which offered a total of $1.8 million in grants, was June 7, 2013. This summary is provided for reference only....

489

Automatic Lighting Shutoff for Tenant Spaces - Code Notes | Building Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Automatic Lighting Shutoff for Tenant Spaces - Code Notes Automatic Lighting Shutoff for Tenant Spaces - Code Notes Automatic shutoff capability for all interior building lighting (with exceptions) is required by ASHRAE Standard 90.1-2007 (as well as previous versions back to 1999) and the 2009 International Energy Conservation Code (including versions back to 2003) for buildings over 5,000ft2. Publication Date: Thursday, March 10, 2011 cn_automatic_lighting_shutoff_for_tenant_spaces.pdf Document Details Document Number: PNNL-SA-66719 Prepared by: Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program Focus: Compliance Building Type: Commercial Code Referenced: ASHRAE Standard 90.1-2007 2009 IECC Document type: Code Notes Target Audience: Architect/Designer Builder Code Official

490

NERSC Users Group Meeting June 24-25, 2004 Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Notes Notes Notes Live Media Streaming via RealPlayer Media streaming of these lectures will be provided via RealPlayer. Users of Windows- or Macintosh-based computers will be able to see and hear the presentation by way of the following procedures. 1. Download and open the slide files onto your computer. 2. Make certain you have the current version of RealPlayer installed. These are available at the Real Free Player Download web site 3. Start the RealPlayer application, and then enter the following address into its URL location: http://ipvideo.lbl.gov:8080/scalable/live.rm.sdp. Should the above address not work, or if your workstation is on a non-LBL network, then use the following one: rtsp://ipvideo.lbl.gov:554/encoder/live.rm
You may

491

Commercial Air Barrier Requirements for Insulated Ceilings - Code Notes |  

NLE Websites -- All DOE Office Websites (Extended Search)

Air Barrier Requirements for Insulated Ceilings - Code Notes Air Barrier Requirements for Insulated Ceilings - Code Notes The 2009 International Energy Conservation Code requires openings in the building envelope to be sealed to prevent air leakage into and out of the space, including an air barrier at insulation installations. Publication Date: Wednesday, June 22, 2011 cn_commercial_air_barrier_requirements_for_insulated_ceilings.pdf Document Details Prepared by: Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program Focus: Compliance Building Type: Commercial Code Referenced: ASHRAE Standard 90.1-2007 2009 IECC Document type: Code Notes Target Audience: Architect/Designer Builder Code Official Contractor Engineer Contacts Web Site Policies U.S. Department of Energy USA.gov Last Updated: Thursday, September 20, 2012 - 17:25

492

Reasoning with rough description logics: An approximate concepts approach  

Science Conference Proceedings (OSTI)

The current research progress and the existing problems of uncertain or imprecise knowledge representation and reasoning in description logics are analyzed in this paper. Approximate concepts are introduced to description logics based on rough set theory, ... Keywords: Approximate concepts, Concepts, Description logics, Rough description logics, Rough set theory

Yuncheng Jiang; Ju Wang; Suqin Tang; Bao Xiao

2009-02-01T23:59:59.000Z

493

Standard-C hydrogen monitoring system, system design description  

DOE Green Energy (OSTI)

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

494

Description of Energy Intensity Tables (12)  

U.S. Energy Information Administration (EIA) Indexed Site

3. Description of Energy Intensity Data Tables 3. Description of Energy Intensity Data Tables There are 12 data tables used as references for this report. Specifically, these tables are categorized as tables 1 and 2 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1985, 1988, 1991, and 1994; along with the percentage changes between 1985 and the three subsequent years (1988, 1991, and 1994) tables 3 and 4 present 1988, 1991, and 1994 energy-intensity ratios that have been adjusted to the mix of products shipped from manufacturing establishments in 1985 tables 5 and 6 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1988, 1991, and 1994; along with the percentage changes between 1988 and the two subsequent

495

NETL: Industrial Capture & Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Capture & Storage Industrial Capture & Storage Technologies Industrial Capture & Storage The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL, or DOE) is currently implementing a program titled "Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO2 Use." This CO2 Capture and Sequestration (CCS) and CO2 use program is a cost-shared collaboration between the Government and industry whose purpose is to increase investment in clean industrial technologies and sequestration projects. In accordance with the American Recovery and Reinvestment Act of 2009, and Section 703 of Public Law 110-140, DOE's two specific objectives are to demonstrate: (1) Large-Scale Industrial CCS projects from industrial sources, and (2) Innovative Concepts for beneficial CO2 use.

496

Industrial Applications for Renewable Resources  

Science Conference Proceedings (OSTI)

This CD-ROM contains the PowerPoint presentations from the presenters from Industrial Applications of Renewable Resources: A Conference on Sustainable Technologies. Industrial Applications for Renewable Resources Biofuels and Bioproducts and Biodiesel DV

497

Texas Industries of the Future  

E-Print Network (OSTI)

The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs, resulting in improved competitive performance. The bottom line for Texas industry is savings in energy and materials, cost-effective environmental compliance, increased productivity, reduced waste, and enhanced product quality. The state program leverages the programs and tools of the federal Department of Energy's Industries of the Future. At the federal level, there are nine Industries of the Future: refining, chemicals, aluminum, steel, metal casting, glass, mining, agriculture, and forest products. These industries were selected nationally because they supply over 90% of the U.S. economy's material needs and account for 75% of all energy use by U.S. industry. In Texas, three IOF sectors, chemicals, refining and forest products, account for 86% of the energy used by industry in this state.

Ferland, K.

2002-04-01T23:59:59.000Z

498

Empirical essays in industrial organization  

E-Print Network (OSTI)

In this dissertation, I present three empirical essays that encompass topics in industrial organization. The first essay examines the degree of competition and spatial differentiation in the retail industry by exploiting ...

Chiou, Lesley C

2005-01-01T23:59:59.000Z

499

Industry Professional | Open Energy Information  

Open Energy Info (EERE)

Industry Professional Jump to: navigation, search How to GET INVOLVED WITH OpenEI Get involved with OpenEI Programmer.jpg Industry Professional Do you have valuable information...

500

Deaerators in Industrial Steam Systems  

SciTech Connect

This revised ITP tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z