Powered by Deep Web Technologies
Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Industrial Applications  

Science Conference Proceedings (OSTI)

Table 2   Frequently used rubber linings in other industries...Application Lining Power industry Scrubber towers Blended chlorobutyl Limestone slurry tanks Blended chlorobutyl Slurry piping Blended chlorobutyl 60 Shore A hardness natural rubber Seawater cooling water

2

SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

M.M. Ansari

2005-04-05T23:59:59.000Z

3

Industrial Applications of Renewable Resources  

Science Conference Proceedings (OSTI)

Archive of Industrial Applications of Renewable Resources Industrial Applications of Renewable Resources Cincinnati, Ohio, USA Industrial Applications of Renewable Resources ...

4

Industrial Applications for Renewable Resources  

Science Conference Proceedings (OSTI)

This CD-ROM contains the PowerPoint presentations from the presenters from Industrial Applications of Renewable Resources: A Conference on Sustainable Technologies. Industrial Applications for Renewable Resources Biofuels and Bioproducts and Biodiesel DV

5

Industrial Applications Perspective of Nanodielectrics  

Science Conference Proceedings (OSTI)

The field of nanodielectrics has had a significant impact on voltage endurance characteristics of electrical insulation. Improved time-to-breakdown behavior, resulting in reduced aging of insulation, and enhanced thermal stability are of considerable importance in industrial applications. This chapter discusses several specific aspects of nanodielectrics and their role in the future of electrical insulation and dielectric sciences.

Tuncer, Enis [ORNL; Sauers, Isidor [ORNL

2009-01-01T23:59:59.000Z

6

Heat Pipes: An Industrial Application  

E-Print Network (OSTI)

This paper reviews the basics of heat pipe exchangers. Included are how they are constructed, how they operate, where they have application, and various aspects of evaluating a potential application. After discussing the technical aspects of heat pipe exchangers, an industrial case history is presented. The case history involves a retrofit project which added heat pipes to five natural draft process heaters with a combined heat duty of 150 M Btu/hr. A heat recovery of 15 M Btu/hr has resulted from the flue gas/combustion air interchange. The paper will include design considerations, and operating and maintenance history since early 1980. A second application for heat pipes with a 12 M Btu/hr duty installed in 1983 will also be discussed.

Murray, F.

1984-01-01T23:59:59.000Z

7

Electrotechnology Applications in Industrial Process Heating  

Science Conference Proceedings (OSTI)

Electrotechnology applications in industrial process heating are discussed in this technical update. This report builds on the research activities from the previous years and adds new and emerging process heating technologies. The primary focus is given to energy intensive industrial sectors such as primary metals and metal treatment. Successful implementation of the electrotechnologies in various industry applications are also presented in the form of case studies. The technical update also ...

2012-11-26T23:59:59.000Z

8

A Practitioners' Review of Industrial Agent Applications  

Science Conference Proceedings (OSTI)

ERIM's1 Center for Electronic Commerce (CEC) hosted a two-day Workshop on Industrial Agents (WINA) in Ann Arbor, MI on Nov. 1213, 1998. Participation in the workshop was by invitation only, and was restricted to companies with whom ... Keywords: industrial applications, methods, software tools, workshop report

H. Van Dyke Parunak

2000-12-01T23:59:59.000Z

9

Microprocessor applications in the nuclear industry  

Science Conference Proceedings (OSTI)

Microprocessors in the nuclear industry, particularly at the los Al amos Scientific Laboratory, have been and are being utilized in a wide variety of applications ranging from data acquistion and control for basic physics research to monitoring special ...

C. Dwayne Ethiridge

1980-04-01T23:59:59.000Z

10

Adjustable Speed Drive Industrial Applications  

E-Print Network (OSTI)

Electric motors are significant users of electricity in the United States. Approximately 66 percent of the total electricity in the U.S. is used by electric motors. Electronic adjustable speed drives (ASDs) can save energy, lower maintenance cost and improve product quality. By providing a variable frequency output to ac motors the speed of the motors can be controlled and matched to the process requirements. The benefits that may be derived from using ASDs are described and the type of ASDs, applications and specific case studies of ASD installations are also discussed.

Poole, J. N.

1989-09-01T23:59:59.000Z

11

Industry Related Projects [Laser Applications Laboratory] - Nuclear  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry Related Projects Industry Related Projects Capabilities Engineering Experimentation Reactor Safety Experimentation Aerosol Experiments System Components Laser Applications Overview Laser Oil & Gas Well Drilling Laser Heat Treatment Laser Welding of Metals On-line Monitoring Laser Beam Delivery Laser Glazing of Railroad Rails High Power Laser Beam Delivery Decontamination and Decommissioning Refractory Alloy Welding Robots Applications Other Facilities Other Capabilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Laser Applications Laboratory Industry related projects Bookmark and Share LASER OIL & GAS WELL DRILLING Using high-power lasers to drill and complete gas & oil wells LASER HEAT TREATMENT Optimization of laser beam heat treatment (Caterpillar and USCAR)

12

Industrial Needs and Applications for Soft Magnetic Materials  

Science Conference Proceedings (OSTI)

Presentation Title, Industrial Needs and Applications for Soft Magnetic Materials. Author(s) ... Bonded Magnetocaloric Powders for the Refrigeration Application.

13

Industrial Requirements and Applications of Hard Magnetic Materials  

Science Conference Proceedings (OSTI)

Presentation Title, Industrial Requirements and Applications of Hard Magnetic Materials ... Bonded Magnetocaloric Powders for the Refrigeration Application.

14

Applications for Computers in Industrial Powerhouses  

E-Print Network (OSTI)

Computer vendors have succeeded in convincing the management of numerous industrial power houses to buy 'Energy Management Systems' with the promise of saving significant portions of their energy bills. This paper analyzes the advantages and disadvantages of eight potential energy management computer applications.

Delk, S. R.

1981-01-01T23:59:59.000Z

15

Scales of geologic reservoir description for engineering applications  

SciTech Connect

A consequence of the increased interaction between geologists and engineers in resolving reservoir problems has been an awareness on the part of geologists of the need to vary the scale of their geologic description according to particular engineering applications. Conventional geological descriptions are normally too detailed for reservoir engineering simulations and often are not in an appropriate form for relating to reservoir performance. An example is presented of two scales of description of a North Sea oil field for two different applications. The field is a Tertiary submarine slope-fan deposit consisting of thick unconsolidated channel sand facies, a lobe sand facies, and a slope claystone facies, all arranged into 12 stratigraphic units and several subunits. Permeability of the channel sands is about twice that of lobe sands, demonstrating a facies control on reservoir quality. For the purpose of calculating reservoir volumetrics, it was possible to scale up the stratigraphy, by combining similar stratigraphic units, into a simple four-layer reservoir model. Average porosity and permeability vary among the layers in this geologically based model. For the purpose of improving understanding of the reservoir, a more complex flow unit model was developed according to geological and petrophysical properties that would influence the flow of fluids in the reservoir. This model is partly based upon sedimentary facies distribution, but differs from a geologic facies model and is in a more suitable form for relating to reservoir performance.

Slatt, R.M.; Hopkins, G.L.

1988-01-01T23:59:59.000Z

16

Compact microwave ion source for industrial applications  

SciTech Connect

A 2.45 GHz microwave ion source for ion implanters has many good properties for industrial application, such as easy maintenance and long lifetime, and it should be compact for budget and space. But, it has a dc current supply for the solenoid and a rf generator for plasma generation. Usually, they are located on high voltage platform because they are electrically connected with beam extraction power supply. Using permanent magnet solenoid and multi-layer dc break, high voltage deck and high voltage isolation transformer can be eliminated, and the dose rate on targets can be controlled by pulse duty control with semiconductor high voltage switch. Because the beam optics does not change, beam transfer components, such as focusing elements and beam shutter, can be eliminated. It has shown the good performances in budget and space for industrial applications of ion beams.

Cho, Yong-Sub; Kim, Dae-Il; Kim, Han-Sung; Seol, Kyung-Tae; Kwon, Hyeok-Jung; Hong, In-Seok [Proton Engineering Frontier Project, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of)

2012-02-15T23:59:59.000Z

17

Gas insulated substation equipment for industrial applications  

SciTech Connect

Until recently the only available method for construction of high voltage systems was to use exposed air insulated equipment supported on porcelain columns. The past decade has witnessed the introduction and wide acceptance of compressed gas insulated equipment as a viable alternative to the conventional substation system. The characteristics of gas insulated substations (GIS) and their application for industrial use at service voltages at 69 kV and above are discussed.

Kenedy, J.J.

1984-11-01T23:59:59.000Z

18

Bates solar industrial process steam application environmental impact assessment  

DOE Green Energy (OSTI)

It is planned to install 34,440 square feet of linear parabolic trough solar collectors at a new corrugator plant for making corrugated boxes. The system is to operate in parallel with a fossil fuel boiler. An assessment is presented of the impacts of the solar energy system on the existing environment and to determine whether or not a more detailed environmental impact statement is needed. The environmental assessment is based on actual operational data obtained on the collector, fluid, and heat transport system. A description of the design of the solar energy system and its application is given. Also included is a discussion of the location of the new plant in Fort Worth, Texas, and of the surrounding environment. Environmental impacts are discussed in detail, and alternatives to the solar industrial process steam retrofit application are offered. It is concluded that the overall benefits from the solar industrial process heat system outweigh any negative environmental factors. Benefits include reduced fossil fuel demand, with attending reductions in air pollutants. The selection of a stable heat transfer fluid with low toxicity and biodegradable qualities minimizes environmental damage due to fluid spills, personal exposure, and degradation byproducts. The collector is found to be aesthetically attractive with minimal hazards due to glare. (LEW)

Not Available

1981-06-30T23:59:59.000Z

19

Industrial Uses of Vegetable OilsChapter 1 Genetic Modification of Seed Oils for Industrial Applications  

Science Conference Proceedings (OSTI)

Industrial Uses of Vegetable Oils Chapter 1 Genetic Modification of Seed Oils for Industrial Applications Processing eChapters Processing Press Downloadable pdf of Chapter 1 Genetic Modification of Seed Oils for I

20

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report  

Science Conference Proceedings (OSTI)

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

OIT Wireless Telemetry for Industrial Applications  

Science Conference Proceedings (OSTI)

The need for advanced wireless technology has been identified in the National Research Council publication (1) ''Manufacturing Process Controls for the Industries of the Future as a Critical Technology for the Future''. The deployment challenges to be overcome in order for wireless to be a viable option include: (1) eliminating interference (assuring reliable communications); (2) easing the deployment of intelligent, wireless sensors; (3) developing reliable networks (robust architectures); (4) developing remote power (long-lasting and reliable); and (5) developing standardized communication protocols. This project demonstrated the feasibility of robust wireless sensor networks that could meet these requirements for the harsh environments common to the DOE/OIT Industries of the Future. It resulted in a wireless test bed that was demonstrated in a paper mill and a steel plant. The test bed illustrated key protocols and components that would be required in a real-life, wireless network. The technologies for low power connectivity developed and demonstrated at the plant eased fears that the radios would interfere with existing control equipment. The same direct sequence, spread spectrum (DSSS) technology that helped assure the reliability of the connection also demonstrated that wireless communication was feasible in these plants without boosting the transmitted power to dangerous levels. Our experience and research have indicated that two key parameters are of ultimate importance: (1) reliability and (2) inter-system compatibility. Reliability is the key to immediate acceptance among industrial users. The importance cannot be overstated, because users will not tolerate an unreliable information network. A longer term issue that is at least as important as the reliability of a single system is the inter-system compatibility between these wireless sensor networks and other wireless systems that are part of our industries. In the long run, the ability of wireless sensor networks to operate cooperatively in an environment that includes wireless LANs, wireless headsets, RF heating, wireless crane controls and many other users of the electromagnetic spectrum will probably be the most important issue we can address. A network of units (Figure 1) has been developed that demonstrates the feasibility of direct-sequence spread spectrum wireless sensor networking for industrial environments. The hardware consists of a group of reprogrammable transceivers that can act as sensor nodes or network nodes or both. These units and the team that built them are the heart of a test bed development system that has been used successfully in demonstrations at various industrial sites. As previously reported, these units have been successfully tested at a paper mill. More recently, these units were utilized in a permanent installation at a steel mill. Both of these applications demonstrated the ease with which a new network could be installed, and the reality that DSSS units can operate successfully in plants where narrow band transmitters had previously caused interference with plant operations.

Manges, WW

2002-09-03T23:59:59.000Z

22

Electric Power Industry Needs for Grid-Scale Storage Applications |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industry Needs for Grid-Scale Storage Applications Industry Needs for Grid-Scale Storage Applications Electric Power Industry Needs for Grid-Scale Storage Applications Stationary energy storage technologies will address the growing limitations of the electricity infrastructure and meet the increasing demand for renewable energy use. Widespread integration of energy storage devices offers many benefits, including the following: Alleviating momentary electricity interruptions Meeting peak demand Postponing or avoiding upgrades to grid infrastructure Facilitating the integration of high penetrations of renewable energy Providing other ancillary services that can improve the stability and resiliency of the electric grid Electric Power Industry Needs for Grid-Scale Storage Applications More Documents & Publications

23

Figure 63. Industrial delivered energy consumption by application ...  

U.S. Energy Information Administration (EIA)

Sheet3 Sheet2 Sheet1 Figure 63. Industrial delivered energy consumption by application, 2011-2040 (quadrillion Btu) Manufacturing heat and power Nonmanufacturing heat ...

24

Radioisotopes distributed for industrial applications for Oak Ridge National Laboratory  

SciTech Connect

A brief discussion is presented of the radioisotopes distributed by ORNL, available quantities, and their main areas of industrial applications. (DLC)

Lamb, E.

1981-01-01T23:59:59.000Z

25

Industrial and Commercial Heat Pump Applications in the United States  

E-Print Network (OSTI)

The energy crisis of 1973 accelerated the development of large-scale heat pumps in the United States. Since that time, the commercial, institutional, and industrial applications of heat pumps for waste heat recovery have expanded. This paper reviews the trends in heat pump cycle developments and discusses both the closed vapor compression cycle and refrigerants most commonly used and the open-cycle mechanical vapor compression heat pumps. Waste heat sources, heat loads served by heat pumps--and typical applications using heat pumps for large-scale space heating, domestic water heating, and industrial process water heating-- are discussed. Typical installations include commercial applications in hotels, high-rise apartments and condominiums, and office buildings. Institutional installations discussed include hospitals, universities, wastewater treatment plants, and airport terminals. Industrial applications largely center on food processing industries, feedwater heating, metal fabricating, and other industries. Reference is also made to other applications and alternative energy sources now gaining acceptance, including groundwater/geothermal water.

Niess, R. C.

1986-06-01T23:59:59.000Z

26

Daylighting Application and Effectiveness in Industrial Facilities  

E-Print Network (OSTI)

Before the advent of practical mercury vapor and fluorescent lighting, the only available artificial lighting for industrial buildings was incandescent. The illumination of active industrial workspaces with incandescent lighting is difficult, so during the industrial revolution, architects utilized various daylighting strategies such as window walls, skylighting, monitors, etc. However, glazing technologies were primitive compared with our modern choices, When more efficient and effective artificial lighting became available, most older industrial buildings had their daylighting features boarded over. With modern glazing systems and sophisticated designs that minimize glare issues, daylighting for industrial buildings is making a strong comeback. Additionally, new controllable ballasts and automatic lighting controls make possible hybrid lighting systems that are able to provide optimal lighting under all environmental conditions. This paper will discuss how daylighting systems developed decades ago are being modernized to provide high quality, low-glare, uniform lighting. Premium glazing systems that limit heat losses and gain will be discussed. The importance of glare control in day-lit spaces, for worker safety and productivity, will be stressed, and a variety of passive and active strategies will be presented including: redirected beam daylighting; reflective light shelves; and movable baffles and louvers.

McCowan, B.; Birleanu, D.

2005-01-01T23:59:59.000Z

27

A Visualization Application for the Mining Industry Using Standard Tools  

E-Print Network (OSTI)

-mining related data, such as the look of the exposed orebody, the overburden material, the reclaimed area-Based Visualization of Reclaimed Mine Sites". APCOM'99: Computer Applications in the Minerals Industries, Golden, CO

28

Textured Materials for Industry and Military Applications  

Science Conference Proceedings (OSTI)

Sep 5, 2013 ... These textured materials can be used over large areas and potentially could have important applications in products where ice poses a danger.

29

Industrial Process Heating: Current and Emerging Applications of Electrotechnologies  

Science Conference Proceedings (OSTI)

This technical update reviews the state of electric industrial process heating technologies and discusses new heating applications for industrial processes. It principally covers four electric process-heating technologies: induction heating, microwave heating, radio frequency heating, and infrared heating. Information is also presented for other technologies that provide efficient and new applications of electric process heating. These are heat pumps, electron beam heating, electric arc heating, plasma h...

2010-11-12T23:59:59.000Z

30

Supercritical Fluid Extraction Applications in the Process Industries  

E-Print Network (OSTI)

Supercritical fluid extraction (SFE), a separations technique, has recently attracted the attention of the process industries. SFE is based on the observation that a fluid exhibits enhanced solvating ability when compressed at temperatures near its critical temperature to pressures greater than its critical pressure. This extraction process can, under certain circumstances, offer economic advantages comparable to those of conventional separation techniques. Several commercial supercritical processes are currently in operation in the United States and Europe, and new industrial applications are emerging. In this paper, the current and future applications of supercritical fluid technology and the prospects for implementing an SFE operation on an industrial scale are reviewed.

Lahiere, R. J.; Fair, J. R.; Humphrey, J. L.

1985-05-01T23:59:59.000Z

31

ENERGY STAR Challenge for Industry: Recognition Application Form | ENERGY  

NLE Websites -- All DOE Office Websites (Extended Search)

Recognition Application Form Recognition Application Form Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder

32

Cool water demonstration project and its industrial applications  

SciTech Connect

This paper discusses the 100 MW coal gasification combined cycle demonstration project underway at the ''Cool Water'' site of Southern California Edison Company, including the technology, project participants, schedule and opportunities for future industrial users. Industrial applications with multiple product outputs, termed ''polygeneration'', are illustrated with examples for cogeneration and trigeneration. Finally, actions required for planning large-sized gas turbine installations are suggested for today in order to hold open the future options in coal gasification.

Alger, J.; Ahner, D.J.

1982-08-01T23:59:59.000Z

33

A Guide to Insulation Selection for Industrial Applications  

E-Print Network (OSTI)

In the wake of rapidly rising energy costs, insulation systems are receiving much attention from design engineers and owners in the industrial market. This paper discusses the significant properties of the primary industrial insulations as well as the application requirements which lead to proper insulation usage. In addition, the basic reasons for insulating are discussed in terms of how they affect the determination of insulation thickness. The discussion concentrates on piping and equipment insulations and does not deal with refractory materials or usage.

Harrison, M. R.

1979-01-01T23:59:59.000Z

34

Small Distributed Generation Applications in the Industrial Sector: A Screening Assessment  

Science Conference Proceedings (OSTI)

This report documents a screening assessment of small distributed generation applications in the industrial sector.

2001-12-04T23:59:59.000Z

35

Industrial applications of solar energy. First quarterly progress report  

DOE Green Energy (OSTI)

The objective of this program is to define solar energy systems that are technically and economically feasible, can satisfy all or part of selected industry demands, and to determine the market potential for such systems. The primary emphasis is placed on the application of total energy systems where industrial process heat, electrical needs, and space heating and cooling requirements are satisfied with a single solar collector field at maximum possible efficiency. Industrial energy usage in the United States and the Southwest was surveyed to determine which industries were most energy intensive. This resulted in the selection of six major groups: (1) Chemicals and Allied Products - SIC 28, (2) Primary Metals - SIC 33, (3) Petroleum and Coal Products - SIC 29, (4) Paper and Allied Products - SIC 26, (5) Stone, Clay, and Glass Products - SIC 32, and (6) Food and Kindred Products - SIC 20. These groupings account for approximately 80% of the total industrial energy usage, both nationwide and within the Southwest. These major groups were then pursued through their subdivisions to determine more specifically the largest energy users and their locations within the Southwest, allowing the final industry selection. Approximately 300 representatives of the selected industries were contacted to determine their specific energy requirements as well as architecturally related energy parameters. Climatic and seismic data is also being collected for the areas encompassing the selected regions.

Rogan, J.E.

1976-01-01T23:59:59.000Z

36

Applications and systems studies for solar industrial process heat  

SciTech Connect

The program has been highlighted by the development of analytical computer programs, engineering case studies in specific industries, applications and market studies and the assessment of operating experience in actual solar installations. For example, two analytical computer codes (known as PROSYS and ECONMAT) have been assembled and used for the large-scale matching of industrial processes with different types of solar equipment. Verification of the results of this large-scale matching have resulted in a program of detailed case studies of solar and conservation options in local dairies, metal can manufacturing plants, meatpacking plants, and other factories.

Brown, K.C.

1980-01-01T23:59:59.000Z

37

Industrial applications of solar energy. First quarterly progress report  

SciTech Connect

Industrial energy usage in the United States and the Southwest was surveyed to determine which industries were most energy intensive. This resulted in the selection of six major groups: (1) Chemicals and Allied Products - SIC 28, (2) Primary Metals - SIC 33, (3) Petroleum and Coal Products - SIC 29, (4) Paper and Allied Products - SIC 26, (5) Stone, Clay, and Glass Products - SIC 32, and (6) Food and Kindred Products - SIC 20. These groupings account for approximately 80% of the total industrial energy usage, both nationwide and with the Southwest. These major groups were then pursued through their subdivisions to determine more specifically the largest energy users and their locations within the Southwest, allowing the final industry selection. Approximately 300 representatives of the selected industries were contacted to determine their specific energy requirments as well as architecturally related energy parameters. Climaic and seismic data is also being collected for the areas encompassing the selected regions. Figures of Merit are being defined and their applicability to total energy systems tested. Subsystem definition work was initiated.

Rogan, J.E.

1976-01-01T23:59:59.000Z

38

Industry  

E-Print Network (OSTI)

from refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processes

Bernstein, Lenny

2008-01-01T23:59:59.000Z

39

National program plan for research and development in solar heating and cooling for building, agricultural, and industrial applications  

DOE Green Energy (OSTI)

The main feature of the directed program is the focus on specific approaches, called paths, to the application of solar energy. A path is the linking of a method of energy collection or rejection with a particular application. Eleven such paths are identified for building applications and eleven for agricultural and industrial process applications. Here, an overview is given of the program plan. The 11 paths to the solar heating and cooling of buildings and the 11 paths for agricultural and industrial process applications are described. Brief descriptions of these tasks and of the non-engineering tasks are included. The importance of each non-engineering task to the overall R and D program is indicated. (MHR)

Not Available

1978-08-01T23:59:59.000Z

40

Industry  

Science Conference Proceedings (OSTI)

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Adjustable Speed Pumping Applications: Industrial Technologies Program (ITP) Pumping Systems Tip Sheet #11  

SciTech Connect

This two-page tip sheet provides practical tips on application of Adjustable Speed Drives in industrial settings.

2007-01-01T23:59:59.000Z

42

Feasibility evaluation for solar industrial process heat applications  

DOE Green Energy (OSTI)

An analytical method for assessing the feasibility of Solar Industrial Process Heat applications has been developed and implemented in a flexible, fast-calculating computer code - PROSYS/ECONMAT. The performance model PROSYS predicts long-term annual energy output for several collector types, including flat-plate, nontracking concentrator, one-axis tracking concentrator, and two-axis tracking concentrator. Solar equipment cost estimates, annual energy capacity cost, and optional net present worth analysis are provided by ECONMAT. User input consists of detailed industrial process information and optional economic parameters. Internal program data includes meteorological information for 248 US sites, characteristics of more than 20 commercially available collectors representing several generic collector types, and defaults for economic parameters. Because a fullscale conventional back-up fuel system is assumed, storage is not essential and is not included in the model.

Stadjuhar, S. A.

1980-01-01T23:59:59.000Z

43

Laser Isotope Enrichment for Medical and Industrial Applications  

SciTech Connect

Laser Isotope Enrichment for Medical and Industrial Applications by Jeff Eerkens (University of Missouri), Jay Kunze (Idaho State University), and Leonard Bond (Idaho National Laboratory) The principal isotope enrichment business in the world is the enrichment of uranium for commercial power reactor fuels. However, there are a number of other needs for separated isotopes. Some examples are: 1) Pure isotopic targets for irradiation to produce medical radioisotopes. 2) Pure isotopes for semiconductors. 3) Low neutron capture isotopes for various uses in nuclear reactors. 4) Isotopes for industrial tracer/identification applications. Examples of interest to medicine are targets to produce radio-isotopes such as S-33, Mo-98, Mo-100, W-186, Sn-112; while for MRI diagnostics, the non-radioactive Xe-129 isotope is wanted. For super-semiconductor applications some desired industrial isotopes are Si-28, Ga-69, Ge-74, Se-80, Te-128, etc. An example of a low cross section isotope for use in reactors is Zn-68 as a corrosion inhibitor material in nuclear reactor primary systems. Neutron activation of Ar isotopes is of interest in industrial tracer and diagnostic applications (e.g. oil-logging). . In the past few years there has been a sufficient supply of isotopes in common demand, because of huge Russian stockpiles produced with old electromagnetic and centrifuge separators previously used for uranium enrichment. Production of specialized isotopes in the USA has been largely accomplished using old calutrons (electromagnetic separators) at Oak Ridge National Laboratory. These methods of separating isotopes are rather energy inefficient. Use of lasers for isotope separation has been considered for many decades. None of the proposed methods have attained sufficient proof of principal status to be economically attractive to pursue commercially. Some of the authors have succeeded in separating sulfur isotopes using a rather new and different method, known as condensation repression. In this scheme a gas, of the selected isotopes for enrichment, is irradiated with a laser at a particular wavelength that would excite only one of the isotopes. The entire gas is subject to low temperatures sufficient to cause condensation on a cold surface. Those molecules in the gas that the laser excited are not as likely to condense as are the unexcited molecules. Hence the gas drawn out of the system will be enriched in the isotope that was excited by the laser. We have evaluated the relative energy required in this process if applied on a commercial scale. We estimate the energy required for laser isotope enrichment is about 20% of that required in centrifuge separations, and 2% of that required by use of "calutrons".

Leonard Bond

2006-07-01T23:59:59.000Z

44

Industry  

E-Print Network (OSTI)

oxide emission reductions in industry in the EU. Europeanissues: Annual survey of industries. Central StatisticalDesiccated coconut industry of Sri- Lankas opportunities

Bernstein, Lenny

2008-01-01T23:59:59.000Z

45

Environmental and industrial applications of pulsed power systems  

SciTech Connect

The technology base formed by the development of high peak power simulators, laser drivers, free electron lasers (FEL`s), and Inertial Confinement Fusion (ICF) drivers from the early 60`s through the late 80`s is being extended to high average power short-pulse machines with the capabilities of performing new roles in environmental cleanup applications and in supporting new types of industrial manufacturing processes. Some of these processes will require very high average beam power levels of hundreds of kilowatts to perhaps megawatts. In this paper we briefly discuss new technology capabilities and then concentrate on specific application areas that may benefit from the high specific energies and high average powers attainable with short-pulse machines.

Neau, E.L.

1993-10-01T23:59:59.000Z

46

VULCAN at the SNS: Scientific Opportunities, Industrial Applications, and  

NLE Websites -- All DOE Office Websites (Extended Search)

. VULCAN features a unique load-frame allow study of deformation behavior in a complex stress state, including tension-compression, torsion, or multi-axial loading. . VULCAN features a unique load-frame allow study of deformation behavior in a complex stress state, including tension-compression, torsion, or multi-axial loading. VULCAN at the SNS: Scientific Opportunities, Industrial Applications, and Challenges 2. A center piece of VULCAN is the high precision heavy duty sample table, capable of supporting up to 2 ton of industrial sized specimen or sample environment. January 21 - 22, 2010 * Oak Ridge National Laboratory * Oak Ridge, TN, USA Workshop Home Agenda and Important Deadlines Logistics, Hotel, Transportation Committee/Contacts Sponsors Talks Workshop Photos Thank You Note filler VULCAN at the SNS: Scientific Opportunities, Industrial Applications, and Challenges Postworkshop Summary The commissioning of the VULCAN diffractometer at the Spallation Neutron Source presents new and exciting opportunities to engineering diffraction and materials research communities. The idea for an engineering diffractometer at the SNS dates back to a workshop in late 1997, and the desired performance requirements were finalized exactly 10 years ago in a workshop held in Atlanta, Georgia, on January 20-21, 2000. The instrument was funded for construction in November 2003, with a grant from Canada Foundation for Innovation. In August of 2004, the US National Science Foundation Major Research Instrumentation (MRI) Program provided additional funds, through The University of Tennessee, to support unique sample environments for VULCAN. In November 2005, the US Department of Energy, Office of Energy Efficiency and Renewable Energy, funded additional detectors for VULCAN to multiplex the performance of the instrument. VULCAN received first neutrons on Friday June 26, 2009. Initial measurement results show that the neutron flux and instrument resolution are in agreement with Monte Carlo simulations.

47

Industrial applications of hot dry rock geothermal energy  

DOE Green Energy (OSTI)

Geothermal resources in the form of naturally occurring hot water or steam have been utilized for many years. While these hydrothermal resources are found in many places, the general case is that the rock at depth is hot, but does not contain significant amounts of mobile fluid. An extremely large amount of geothermal energy is found around the world in this hot dry rock (HDR). Technology has been under development for more than twenty years at the Los Alamos National Laboratory in the United States and elsewhere to develop the technology to extract the geothermal energy from HDR in a form useful for electricity generation, space heating, or industrial processing. HDR technology is especially attractive for industrial applications because of the ubiquitous distribution of the HDR resource and the unique aspects of the process developed to recover it. In the HDR process, as developed at Los Alamos, water is pumped down a well under high pressure to open up natural joints in hot rock and create an artificial geothermal reservoir. Energy is extracted by circulating water through the reservoir. Pressurized hot water is returned to the surface through the production well, and its thermal energy is extracted for practical use. The same water is then recirculated through the system to mine more geothermal heat. Construction of a pilot HDR facility at Fenton Hill, NM, USA, has recently been completed by the Los Alamos National Laboratory. It consists of a large underground reservoir, a surface plant, and the connecting wellbores. This paper describes HDR technology and the current status of the development program. Novel industrial applications of geothermal energy based on the unique characteristics of the HDR energy extraction process are discussed.

Duchane, D.V.

1992-09-01T23:59:59.000Z

48

Industrial applications of hot dry rock geothermal energy  

DOE Green Energy (OSTI)

Geothermal resources in the form of naturally occurring hot water or steam have been utilized for many years. While these hydrothermal resources are found in many places, the general case is that the rock at depth is hot, but does not contain significant amounts of mobile fluid. An extremely large amount of geothermal energy is found around the world in this hot dry rock (HDR). Technology has been under development for more than twenty years at the Los Alamos National Laboratory in the United States and elsewhere to develop the technology to extract the geothermal energy from HDR in a form useful for electricity generation, space heating, or industrial processing. HDR technology is especially attractive for industrial applications because of the ubiquitous distribution of the HDR resource and the unique aspects of the process developed to recover it. In the HDR process, as developed at Los Alamos, water is pumped down a well under high pressure to open up natural joints in hot rock and create an artificial geothermal reservoir. Energy is extracted by circulating water through the reservoir. Pressurized hot water is returned to the surface through the production well, and its thermal energy is extracted for practical use. The same water is then recirculated through the system to mine more geothermal heat. Construction of a pilot HDR facility at Fenton Hill, NM, USA, has recently been completed by the Los Alamos National Laboratory. It consists of a large underground reservoir, a surface plant, and the connecting wellbores. This paper describes HDR technology and the current status of the development program. Novel industrial applications of geothermal energy based on the unique characteristics of the HDR energy extraction process are discussed.

Duchane, D.V.

1992-01-01T23:59:59.000Z

49

Scales of geologic reservoir description for engineering applications: North Sea oil field example  

SciTech Connect

A consequence of the increased interaction between geologists and engineers in resolving reservoir problems has been an awareness on the part of geologists of the need to vary the scale of their geologic description according to particular engineering applications. Conventional geological descriptions are normally too detailed for reservoir engineering simulations and often are not in an appropriate form for relating to reservoir performance. An example is presented of two scales of description of a North Sea oil field for two different applications. The field is a Tertiary submarine slope-fan deposit consisting of thick unconsolidated channel sand facies, a lobe sand facies, and a slope claystone facies, all arranged into 12 stratigraphic units and several subunits. Permeability of the channel sands is about twice that of lobe sands, demonstrating a facies control on reservoir quality. For the purpose of calculating reservoir volumetrics, it was possible to scale up the stratigraphy, by combining similar stratigraphic units, into a simple four-layer reservoir model. Average porosity and permeability vary among the layers in this geologically based model. For the purpose of improving understanding of the reservoir, a more complex flow unit model was developed according to geological and petrophysical properties that would influence the flow of fluids in the reservoir. This model is partly based upon sedimentary facies distribution, but differs from a geologic facies model and is in a more suitable form for relating to reservoir performance.

Slatt, R.M.; Hopkins, G.L.

1988-02-01T23:59:59.000Z

50

Nickel-Based Superalloy Welding Practices for Industrial Gas Turbine Applications M.B. Henderson  

E-Print Network (OSTI)

1 Nickel-Based Superalloy Welding Practices for Industrial Gas Turbine Applications M.B. Henderson and reduced costs for industrial gas turbine engines demands extended use of high strength-high temperature superalloys are used within the industrial gas turbine (IGT) engine manufacturing industry, specifically

Cambridge, University of

51

AMO Industrial Distributed Energy: Clean Energy Application Centers  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Efficiency and Renewable Energy EERE Home | Programs & Offices | Consumer Information Industrial Distributed Energy Search Search Help Industrial Distributed Energy EERE...

52

Industrial application of geothermal energy in Southeast Idaho  

DOE Green Energy (OSTI)

Those phosphate related and food processing industries in Southeastern Idaho are identified which require large energy inputs and the potential for direct application of geothermal energy is assessed. The total energy demand is given along with that fractional demand that can be satisfied by a geothermal source of known temperature. The potential for geothermal resource development is analyzed by examining the location of known thermal springs and wells, the location of state and federal geothermal exploration leases, and the location of federal and state oil and gas leasing activity in Southeast Idaho. Information is also presented regarding the location of geothermal, oil, and gas exploration wells in Southeast Idaho. The location of state and federal phosphate mining leases is also presented. This information is presented in table and map formats to show the proximity of exploration and development activities to current food and phosphate processing facilities and phosphate mining activities. (MHR)

Batdorf, J.A.; McClain, D.W.; Gross, M.; Simmons, G.M.

1980-02-01T23:59:59.000Z

53

Industry  

E-Print Network (OSTI)

the paper, glass or ceramics industry) making it difficulttechnology in the ceramic manufacturing industry. industries: iron and steel, non-ferrous metals, chemicals (including fertilisers), petroleum refining, minerals (cement, lime, glass and ceramics) and

Bernstein, Lenny

2008-01-01T23:59:59.000Z

54

Industry  

E-Print Network (OSTI)

in the iron and steel industry: a global model. Energy, 30,report of the world steel industry 2005. International Irontrends in the iron and steel industry. Energy Policy, 30,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

55

Deep Frying: Chemistry, Nutrition and Practical ApplicationsChapter 14 Industrial Frying  

Science Conference Proceedings (OSTI)

Deep Frying: Chemistry, Nutrition and Practical Applications Chapter 14 Industrial Frying Food Science Health Nutrition Biochemistry eChapters Food Science & Technology Health - Nutrition - Biochemistry Press Download

56

The First Results of the Industrial Application of the EcoSoderberg ...  

Science Conference Proceedings (OSTI)

The Effect of Calcium Fluoride on Alumina Solubility in Low Temperature Cryolite Melts The First Results of the Industrial Application of the EcoSoderberg...

57

Industrial Utilization of Surfactants: Principles & PracticeChapter 6 Surfactant Applications 1  

Science Conference Proceedings (OSTI)

Industrial Utilization of Surfactants: Principles & Practice Chapter 6 Surfactant Applications 1 Surfactants and Detergents eChapters Surfactants - Detergents Press Downloadable pdf of Chapter 6 Surfactant Applica

58

Industrial Utilization of Surfactants: Principles & PracticeChapter 7 Surfactant Applications 2  

Science Conference Proceedings (OSTI)

Industrial Utilization of Surfactants: Principles & Practice Chapter 7 Surfactant Applications 2 Surfactants and Detergents eChapters Surfactants - Detergents Press Downloadable pdf of Chapter 7 Surfactant Applica

59

Applications of fusion thermal energy to industrial processes  

DOE Green Energy (OSTI)

The feasibility of applying fusion thermal energy as process heat in the iron-steel industry, petrochemical industry, cement industry, and in the production of acetylene fom coal via calcium carbide are discussed. These four industries were selected for analysis because they require massive amounts of energy. This preliminary study concludes that the production of synthetic fuels using fusion heat appears to be the most promising method of storing and transporting this heat. Of the four industries studied, the iron-steel and the petrochemical industries appear to be the most promising because they consume substantial amounts of hydrogen and oxygen as feedstocks. These can be produced from water using the high-temperature fusion heat. The production of hydrogen and oxygen using fusion heat will also reduce the capital investment required for these industries. These two industries also consume tremendous amounts of heat at temperatures which can be delivered from a fusion blanket via chemical heat pipes.

Bowman, R.M.; Jody, B.J.; Lu, K.C.

1980-01-01T23:59:59.000Z

60

ENERGY STAR Challenge for Industry: Recognition Application Form...  

NLE Websites -- All DOE Office Websites (Extended Search)

Federal agency resources Grocery & convenience stores resources Healthcare resources Higher education resources Home-based business resources Hospitality resources Industrial...

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Speed Control in Industrial Refrigeration: Theory, Application & Case Studies  

E-Print Network (OSTI)

It is often standard practice in the field of industrial refrigeration to design and operate systems with little regard toward part-load performance. This approach is understandable, whether viewed from the standpoint of the design engineer, plant manager or chief operator. As long a space temperature and production rates are maintained during peak periods, the refrigeration system is viewed as operating "correctly". The truth is, most refrigeration systems spend some, if not most operating hours at reduced capacity. Screw compressors back off slide valves, evaporator coils utilize back-pressure regulators (BPRs) or liquid solenoids, and condensers cycle fans. Unfortunately, these control methods do not provide the maximum attainable reduction in brake horsepower (BHP) as refrigeration capacity is reduced. This paper will discuss the application of variable speed drive (VSD, also called "variable frequency drive", "adjustable speed drive", "inverter", or simply "freq. drive") technology to capacity control of screw compressors, evaporator fans, and condenser fans. As shown through theory and case study, speed control of these components provides maximum flexibility, control and energy efficiency.

Wilcox, M. H.

1995-04-01T23:59:59.000Z

62

Industry  

E-Print Network (OSTI)

and power in US industry. Energy Policy, 29, pp. 1243-1254.Paris. IEA, 2004: Energy Policies of IEA Countries: Finlandand steel industry. Energy Policy, 30, pp. 827-838. Kim, Y.

Bernstein, Lenny

2008-01-01T23:59:59.000Z

63

Titanium composite material for oil and gas industry applications  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2010. Symposium, Corrosion and Corrosion Protection of Materials in the Oil and Gas Industry.

64

The Materials Science and Engineering, Industrial Applications, and ...  

Science Conference Proceedings (OSTI)

CAST has 18 industry and research provider participants and is focused on light metals research for companies that span metal producers, their equipment...

65

Applications of fault detection methods to industrial processes  

Science Conference Proceedings (OSTI)

Components of industrial processes are often affected by un-permitted or un-expected deviations from normal operation behaviour. The fault detection task consists of determination of the fault present in a system and the time of detection. In addition ... Keywords: fault detection and diagnosis, industrial processes, residuals, symptoms

Ioana Fagarasan; S. S. T. Iliescu

2008-06-01T23:59:59.000Z

66

AMO Industrial Distributed Energy: Clean Energy Application Centers  

NLE Websites -- All DOE Office Websites (Extended Search)

this topic. DOE's Regional Clean Energy Application Centers (CEACs), formerly called the Combined Heat and Power (CHP) Regional Application Centers (RACs), promote and assist in...

67

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and...

68

Site-specific solar resource measurements for industrial solar applications  

DOE Green Energy (OSTI)

The solar industry can borrow solar radiation measuring equipment from the National Renewable Energy Laboratory (NREL) as part of NREL`s Solar Industrial Program. This program provides assistance to qualified parties in quantifying the solar radiation resource at prospective sites to reduce the risks of deploying industrial solar energy systems. Up-to-date solar radiation measurements permit comparisons of fresh data with existing data to verify established data bases and also provide data based on actual measurements instead of on less accurate models. This report outlines the responsibilities and obligations of NREL and the solar industry participant. It also describes the equipment for measuring solar radiation, the data quality assessment procedures, and the format of the data provided.

Marion, W.

1994-06-01T23:59:59.000Z

69

Applications of industrial ecology : manufacturing, recycling, and efficiency  

E-Print Network (OSTI)

This work applies concepts from industrial ecology to analyses of manufacturing, recycling, and efficiency. The first part focuses on an environmental analysis of machining, with a specific emphasis on energy consumption. ...

Dahmus, Jeffrey B. (Jeffrey Brian), 1974-

2007-01-01T23:59:59.000Z

70

Software agents : an application to the airline MRO industry  

E-Print Network (OSTI)

Poor management of aircraft spare parts, human-related maintenance errors and the lack of coordinated decision-making in maintenance scheduling are some of the problems plaguing the airline MRO industry. Airlines, independent ...

Poon, Arthur Wai Keong, 1979-

2004-01-01T23:59:59.000Z

71

Food Industry 2000: Food Processing Opportunities, Challenges, New Technology Applications  

Science Conference Proceedings (OSTI)

This report presents a summary of some of the major factors affecting the food processing industry, i. e., economic pressures, consumer concerns and pressures, regulatory restrictions, and general conservatism. The food industry must be responsive to the growing consumer interest in the relationship between diet and general health, to the changes in consumer demographics and desires, and to the opportunities offered by new technology, especially electrotechnologies.

2000-09-18T23:59:59.000Z

72

Recycling of the product of thermal inertization of cement-asbestos for various industrial applications  

SciTech Connect

Recycling of secondary raw materials is a priority of waste handling in the countries of the European community. A potentially important secondary raw material is the product of the thermal transformation of cement-asbestos, produced by prolonged annealing at 1200-1300 {sup o}C. The product is chemically comparable to a Mg-rich clinker. Previous work has assured the reliability of the transformation process. The current challenge is to find potential applications as secondary raw material. Recycling of thermally treated asbestos-containing material (named KRY.AS) in traditional ceramics has already been studied with successful results. The results presented here are the outcome of a long termed project started in 2005 and devoted to the recycling of this secondary raw materials in various industrial applications. KRY.AS can be added in medium-high percentages (10-40 wt%) to commercial mixtures for the production of clay bricks, rock-wool glasses for insulation as well as Ca-based frits and glass-ceramics for the production of ceramic tiles. The secondary raw material was also used for the synthesis of two ceramic pigments; a green uvarovite-based pigment [Ca{sub 3}Cr{sub 2}(SiO{sub 4}){sub 3}] and a pink malayaite-based pigment [Ca(Sn,Cr)SiO{sub 5}]. The latter is especially interesting as a substitute for cadmium-based pigments. This work also shows that KRY.AS can replace standard fillers in polypropylene plastics without altering the properties of the final product. For each application, a description and relevant results are presented and discussed.

Gualtieri, Alessandro F., E-mail: alessandro.gualtieri@unimore.it [Dipartimento di Scienze della Terra, Universita di Modena e R.E., Via S. Eufemia 19, I-41100 Modena (Italy); Giacobbe, Carlotta; Sardisco, Lorenza; Saraceno, Michele [Dipartimento di Scienze della Terra, Universita di Modena e R.E., Via S. Eufemia 19, I-41100 Modena (Italy); Lassinantti Gualtieri, Magdalena [Dipartimento Ingegneria dei Materiali e dell'Ambiente, Universita di Modena e Reggio Emilia, Via Vignolese 905/a, I-41100 Modena (Italy); Lusvardi, Gigliola [Dipartimento di Chimica, Universita degli Studi di Modena e Reggio Emilia, Via G. Campi 183, I-41100 Modena (Italy); Cavenati, Cinzia; Zanatto, Ivano [ZETADI S.r.l., Via dell'Artigianato 10, Ferno (Italy)

2011-01-15T23:59:59.000Z

73

Job descriptions and job analyses in practice: How research and application differ.  

E-Print Network (OSTI)

??The study examined the content of job descriptions in municipal government and compared the content to the recommendations in the literature. The study also examined (more)

Royer, Kendra Palmer

2010-01-01T23:59:59.000Z

74

SOLERAS - Summary technical report on SOLERAS Industrial Solar Thermal Applications Project  

Science Conference Proceedings (OSTI)

This document reports the advances in solar industrial applications made by SOLERAS, a joint United States-Saudi Arabian solar energy research and development program. The industrial application chosen was the freeze desalination of seawater powered by mid-temperature (385/degree/C) solar collectors. This innovative process will compete with other downscaled desalination processes for small communities in developing countries. Using solar energy to power this installation demonstrates the ability of solar energy to fuel any industrial application that requires mid-temperature energy. 13 refs., 11 figs.

Zimmerman, J.C.

1987-10-01T23:59:59.000Z

75

Fluidized Bed Applications for the Minerals Industry and Renewable ...  

Science Conference Proceedings (OSTI)

Experiences from metallurgical processes have been expanded to new applications in the oil shale processing, biomass combustion and renewable energy...

76

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

An Exploration of Innovation and An Exploration of Innovation and Energy Efficiency in an Appliance Industry Prepared by Margaret Taylor, K. Sydny Fujita, Larry Dale, and James McMahon For the European Council for an Energy Efficient Economy March 29, 2012 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY LBNL - 5689E An Exploration of Innovation and Energy Efficiency in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and direction of technological change of product industries; the factors that underlie the outcomes of innovation in these industries; and the ways the innovation system might respond to any given intervention. The report provides an overview of the dynamics of energy efficiency policy and innovation in the appliance

77

Industry  

E-Print Network (OSTI)

milling industry: An ENERGY STAR Guide for Energy and Plantcement mak- ing - An ENERGY STAR Guide for Energy and Plantre- fineries - An ENERGY STAR Guide for Energy and Plant

Bernstein, Lenny

2008-01-01T23:59:59.000Z

78

Survey paper: A survey on industrial applications of fuzzy control  

Science Conference Proceedings (OSTI)

Fuzzy control has long been applied to industry with several important theoretical results and successful results. Originally introduced as model-free control design approach, model-based fuzzy control has gained widespread significance in the past decade. ... Keywords: Adaptive fuzzy control, Mamdani fuzzy controllers, Predictive control, Stable design, Takagi-Sugeno fuzzy controllers

Radu-Emil Precup; Hans Hellendoorn

2011-04-01T23:59:59.000Z

79

Dominant Feature Identification for Industrial Fault Detection and Isolation Applications  

Science Conference Proceedings (OSTI)

Fault Detection and Isolation (FDI) is crucial to reduce production costs and down-time in industrial machines. In this paper, we show how to find a reduced feature subset which is optimal in both estimation and clustering least square errors using a ... Keywords: Least Square Error (LSE), Neural Network (NN), Principal Component Analysis (PCA), Principal Feature Analysis (PFA), Singular Value Decomposition (SVD)

Jun-Hong Zhou; Chee Khiang Pang; Frank L. Lewis; Zhao-Wei Zhong

2011-08-01T23:59:59.000Z

80

Application of Non-Nuclear Robotics to Nuclear Industry Decommissioning  

Science Conference Proceedings (OSTI)

Segmentation of radioactive components, including reactor cavity internals, has proved to be a challenging job for the nuclear power industry during decommissioning. The innovative use of robotic technology to perform debris cleanup can help utilities maximize worker safety. This report documents a first of its kind robotics experience at Connecticut Yankee.

2004-08-11T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Potential industrial applications for composite phase-change materials as thermal energy storage media  

Science Conference Proceedings (OSTI)

Considerable effort has been spent by the US Department of Energy and its contractors over the last few years to develop composite phase-change materials (CPCMs) for thermal energy storage (TES). This patented TES medium consists of a phase-change material (typically a salt or metal alloy) that is retained within the porous structure of a supporting material (typically a ceramic). The objectives of this study were to (1) introduce CPCMs to industries that may not otherwise be aware of them, (2) identify potentially attractive applications for CPCM in industry, (3) determine technical requirements that will affect the design of CPCM's for specific applications, and (4) generate interest among industrial firms for employing CPCM TES in their processes. The approach in this study was to examine a wide variety of industries using a series of screens to select those industries that would be most likely to adopt CPCM TES in their processes. The screens used in this study were process temperature, presence of time-varying energy flows, energy intensity of the industry, and economic growth prospects over the next 5 years. After identifying industries that passed all of the screens, representatives of each industry were interviewed by telephone to introduce them to CPCM TES, assess technical requirements for CPCM TES in their industry, and determine their interest in pursuing applications for CPCM TES. 11 refs., 4 tabs.

Spanner, G.E.; Wilfert, G.L.

1989-07-01T23:59:59.000Z

82

Hybrid modeling of industrial energy consumption and greenhouse gas emissions with an application to Canada  

E-Print Network (OSTI)

Hybrid modeling of industrial energy consumption and greenhouse gas emissions with an application explore the implications for Canada's industrial sector of an economy-wide, compulsory greenhouse gas of these strengths is linked to challenges when it comes to forecasting the impact of greenhouse gas policy. We

83

Reduced-risk HTGR concept for industrial-heat application  

SciTech Connect

The industrial process heat market has been identified as major market for the High Temperature Gas-Cooled Reactor (HTGR), however, this market introduces stringent availability requirements on the reactor system relative to electric plants which feed a large existing grid. The characteristics and requirements of the industrial heat markets are summarized; the risks associated with serving this market with a single large HTGR will be discussed; and the modular concept, which has the potential to reduce both safety and investment risks, will be described. The reference modular concept described consists of several small, relatively benign nuclear heat sources linked together to supply heat energy to a balance-of-plant incorporating a process gas train/thermochemical pipe line system and a normal steam-electric plant.

Boardman, C.E.; Lipps, A.J.

1982-06-01T23:59:59.000Z

84

Application of solar thermal energy to buildings and industry  

DOE Green Energy (OSTI)

Flat plate collectors and evacuated tube collectors are described, as are parabolic troughs, Fresnel lenses, and compound parabolic concentrators. Use of solar energy for domestic hot water and for space heating and cooling are discussed. Some useful references and methods of system design and sizing are given. This includes mention of the importance of economic analysis. The suitability of solar energy for industrial use is discussed, and solar ponds, point-focus receivers and central receivers are briefly described. The use of solar energy for process hot water, drying and dehydration, and process steam are examined, industrial process heat field tests by the Department of Energy are discussed, and a solar total energy system in Shenandoah, GA is briefly described. (LEW)

Kutscher, C. F.

1981-05-01T23:59:59.000Z

85

Solar technology and the insurance industry: Issues and applications  

DOE Green Energy (OSTI)

Today's insurance industry strongly emphasizes developing cost-effective hazard mitigation programs, increasing and retaining commercial and residential customers through better service, educating customers on their exposure and vulnerabilities to natural disasters, collaborating with government agencies and emergency management organizations, and exploring the use of new technologies to reduce the financial impact of disasters. Solar technology can be used in underwriting, claims, catastrophe response, loss control, and risk management. This report will address the above issues, with an emphasis on pre-disaster planning and mitigation alternatives. It will also discuss how energy efficiency and renewable technologies can contribute to reducing insurance losses and offer suggestions on how to collaborate with the utility industry and how to develop educational programs for business and consumers.

Deering, A.; Thornton, J. P.

1999-07-01T23:59:59.000Z

86

The Hydrometeor Classification Algorithm for the Polarimetric WSR-88D: Description and Application to an MCS  

Science Conference Proceedings (OSTI)

This paper contains a description of the most recent version of the hydrometeor classification algorithm for polarimetric Weather Surveillance Radar-1988 Doppler (WSR-88D). This version contains several modifications and refinements of the ...

Hyang Suk Park; A. V. Ryzhkov; D. S. Zrni?; Kyung-Eak Kim

2009-06-01T23:59:59.000Z

87

THE APPLICATION OF RADIOACTIVE RADIATION SOURCES IN THE TEXTILE INDUSTRY. PART IV. FURTHER EXAMPLES OF APPLICATION  

SciTech Connect

A review on the status of radioisotope applications in the textile industry is presented. The use of energy-rich radiation for the initiation of block- and graft polymerization of macromolecules used in the manufacture of synthetic fibers is discussed. For determining the colorfastness of fabrics, their behavior toward fatty acids can be measured by using soaps or detergents labeled with I/sup 131/. In manufacturing viscose fibers, the complete removal of S can be determined by using S/sup 35/-labeled xanthogenate. The viscosity can be measured by determining the sink velocity of a radioactively labeled small Pb ball. In spinning, numerous applications are possible by using suitably labeled radioactive fibers in the spinning process. In weaving, radioisotopes allow the control of the physical and mechanical qualities of the fabrics. In laundry and dry-cleaning research, radioisotopes are used for determining the soil removal from different fabrics by various cleaning agents. Pn/sup 210/ is used in textile plants for removing static electricity accumulating in textile machinery during operation. (OID)

Heger, A.

1962-08-01T23:59:59.000Z

88

Abstract--With the deregulation and restructuring of utility industry, many substation automation applications are being  

E-Print Network (OSTI)

Control and Data Acquisition (SCADA) and Energy Management System (EMS) applications of substation environment of substation automation project. It provides data to a number of application including automated1 Abstract--With the deregulation and restructuring of utility industry, many substation automation

89

Thermal Storage Applications for Commercial/Industrial Facilities  

E-Print Network (OSTI)

Texas Utilities Electric Company has been actively encouraging installations of thermal storage since 1981. Financial incentives and advantageous rates can make thermal storage an attractive cooling concept in Texas Utilities Electric Company service area. Currently, 14 million square feet of commercial building space in Dallas is either constructing thermal storage or using it on a day-by-day basis. This presentation will discuss three technologies for thermal storage systems noting the particular advantages of each. Thermal storage technologies are selected by the temperature range of the storage media. This is not a design-oriented presentation, but an overview of what one utility sees taking place in the commercial and industrial refrigeration market place.

Knipp, R. L.

1986-06-01T23:59:59.000Z

90

Expansion of elastic bodies with application in the bread industry  

Science Conference Proceedings (OSTI)

This article is concerned with modeling the expansion of an elastic body with application to the evolution of bread dough during the proofing process. The main result is a set of linear second-order partial differential equations corresponding to an ... Keywords: B-Splines, Bread dough, Elastic expansion, Rayleigh-Ritz method, Surface evolution

P. C. Bollada

2008-10-01T23:59:59.000Z

91

Virtual reality training applications for the mining industry  

Science Conference Proceedings (OSTI)

Virtual reality is a rapidly growing technology which utilises the ever-increasing power of computers to simulate real-world and imaginary environments and situations with a high degree of realism and interactiveness. Safety in the South African mining ... Keywords: mining training applications, realism, safety training, virtual reality

Etienne van Wyk; Ruth de Villiers

2009-02-01T23:59:59.000Z

92

Industrial  

Gasoline and Diesel Fuel Update (EIA)

Industrial Industrial 8,870,422 44.3% Commercial 3,158,244 15.8% Electric Utilities 2,732,496 13.7% Residential 5,241,414 26.2% Source: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." T e x a s L o u i s i a n a C a l i f o r n i a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Industrial Billion Cubic Meters T e x a s C a l i f o r n i a F l o r i d a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Electric Utilities Billion Cubic Meters N e w Y o r k C a l i f o r n i a I l l i n o i s A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Commercial Billion Cubic Meters I l l i n o i s C a l i f o r n i a N e w Y o r k A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Residential Billion Cubic Meters 11. Natural Gas Delivered to Consumers in the United States, 1996 Figure Volumes in Million Cubic Feet Energy Information Administration

93

Research and application on ontology-based layered cloud simulation service description framework  

Science Conference Proceedings (OSTI)

Cloud simulation system improves the ability of current network-based M&S in on-demand simulation and massive-user service. The share of multi-granularity resources and dynamic establishment of simulation services in Cloud Simulation raise new challenges ... Keywords: cloud simulation, layered, ontology, owl-s, simulation service description framework

Tan Li, Xudong Chai, Baocun Hou, Bohu Li

2013-05-01T23:59:59.000Z

94

Applications for Microwave Generators in the Process Industries  

E-Print Network (OSTI)

Microwaves find widespread use in radar applications, in telephonic communications, and in the generation of thermal energy for heating. It is this last use that is of interest here. The use of microwave generators to dry heat-sensitive materials and regenerate beds of solid adsorbents is currently being investigated at The University of Texas. This paper summarizes the first phase of this program, which involves microwave drying of various types of polymers. Future research goals and programs are also presented.

Humphrey, J. L.; Vasilakos, N. P.

1983-01-01T23:59:59.000Z

95

Emerging Industrial Process Heating Technologies:An Update on Electrotechnologies, Applications, and Case Studies  

Science Conference Proceedings (OSTI)

In this technical update, emerging technologies as well as applications of electrotechnologies in industrial process heating are discussed. This technical update is a continuation of the Electric Power Research Institutes (EPRIs) research from the previous years and adds new state-of-the-art process heating technologies to the list. The main focus of the research is given to energy-intensive industrial sectors such as primary metals and metal treatment. Successful implementation of the ...

2013-12-07T23:59:59.000Z

96

Simulation and preliminary performance characteristics of a computed tomography device for industrial applications  

SciTech Connect

A computed tomography system designed to function in an industrial environment is being constructed. The modular design maintains the flexibility necessary in an environment where source strength and energy, as well as detector type, could change with each application. The static nature of industrial objects also allow economies of design not possible where dynamic objects are to be analyzed. Simulation of the device has been completed and expected image qualities obtained.

Kruger, R.P.; Cannon, T.M.; Lundy, A.S.; Morris, R.A.

1978-01-01T23:59:59.000Z

97

Solar feasibility study for site-specific industrial-process-heat applications. Final report  

DOE Green Energy (OSTI)

This study addresses the technical feasibility of solar energy in industrial process heat (IPH) applications in Mid-America. The study was one of two contracted efforts covering the MASEC 12-state region comprised of: Illinois, Michigan, North Dakota, Indiana, Minnesota, Ohio, Iowa, Missouri, South Dakota, Kansas, Nebraska, Wisconsin. The results of our study are encouraging to the potential future role of solar energy in supplying process heat to a varied range of industries and applications. We identified and developed Case Study documentation of twenty feasible solar IPH applications covering eight major SIC groups within the Mid-American region. The geographical distribution of these applications for the existing range of solar insolation levels are shown and the characteristics of the applications are summarized. The results of the study include process identification, analysis of process heat requirements, selection of preliminary solar system characteristics, and estimation of system performance and cost. These are included in each of the 20 Case Studies. The body of the report is divided into two primary discussion sections dealing with the Study Methodology employed in the effort and the Follow-On Potential of the identified applications with regard to possible demonstration projects. The 20 applications are rated with respect to their relative overall viability and procedures are discussed for possible demonstration project embarkment. Also, a possible extension of this present feasibility study for late-comer industrial firms expressing interest appears worthy of consideration.

Murray, O.L.

1980-03-18T23:59:59.000Z

98

Nuclear Maintenance Applications Center: Maintenance and Modification Work Planner Training Program Description  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide guidance for the development of a training program for the qualification of maintenance and modification work planners. The training program is intended to provide maintenance and modification work planners with the fundamental knowledge and skills required to prepare consistent, high quality packages aligned with site-specific and industry standards.This report provides a standard approach for developing and implementing a work planner training ...

2013-10-24T23:59:59.000Z

99

An overview of time-based and condition-based maintenance in industrial application  

Science Conference Proceedings (OSTI)

This paper presents an overview of two maintenance techniques widely discussed in the literature: time-based maintenance (TBM) and condition-based maintenance (CBM). The paper discusses how the TBM and CBM techniques work toward maintenance decision ... Keywords: Condition-based maintenance, Industrial application, Maintenance decision making, Maintenance techniques, Preventive maintenance, Time-based maintenance

Rosmaini Ahmad; Shahrul Kamaruddin

2012-08-01T23:59:59.000Z

100

Reducing the Anaerobic Digestion Model N1 for its application to an industrial wastewater treatment plant  

E-Print Network (OSTI)

the Anaerobic Digestion Model N°1 for its application to an industrial wastewater treatment plant treating 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 2 Abstract The Anaerobic Digestion Model N°1 (ADM1., 2005). Anaerobic digestion process involves many interactions between species that may not all have

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

State-of-the-art of solar control systems in industrial process heat applications  

DOE Green Energy (OSTI)

The state-of-the-art of solar control systems is addressed pertinent to industrial process heat applications. Solar system configurations currently being used or proposed are presented; parameters and functions deemed essential in solar system controls are identified; operating deficiencies are described; and possible future improvements are discussed.

Su, W. S.; Castle, J. N.

1979-07-01T23:59:59.000Z

102

Ten commandments revisited: a ten-year perspective on the industrial application of formal methods  

Science Conference Proceedings (OSTI)

Ten years ago, our 1995 paper Ten Commandments of Formal Methods [5] suggested some guidelines to help ensure the success of a formal methods project. It proposed ten important requirements (or "commandments") for formal developers to consider ... Keywords: correctness, formal methods, industrial application, software engineering

Jonathan P. Bowen; Michael G. Hinchey

2005-09-01T23:59:59.000Z

103

Semantic 3D CAD and its applications in construction industry: an outlook of construction data visualization  

Science Conference Proceedings (OSTI)

In response to the need of using electronic design data directly in construction management applications, many CAD developers have started implementing semantic data models in their CAD products using industry foundation classes (IFCs). While helpful, ... Keywords: 3D CAD, IFC, construction, data visualization, semantic

Zhigang Shen; Raja R. A. Issa; Linxia Gu

2007-06-01T23:59:59.000Z

104

Industrial | OpenEI  

Open Energy Info (EERE)

Industrial Industrial Dataset Summary Description The Industrial Assessment Centers (IAC) Database is a collection of all the publicly available data from energy efficiency assessments conducted by IACs at small and medium-sized industrial facilities. Source Department of Energy Industrial Assessment Centers Date Released September 20th, 2012 (2 years ago) Date Updated September 20th, 2012 (2 years ago) Keywords assessment energy efficiency Industrial manufacturing small and medium-sized Data application/vnd.ms-excel icon copy_of_iac_database.xls (xls, 28.7 MiB) Quality Metrics Level of Review Standards Comment Temporal and Spatial Coverage Frequency Daily Time Period License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset

105

Contributions and future of radioisotopes in medical, industrial and space applications  

Science Conference Proceedings (OSTI)

There are 333 isotopes that have a half-life between 1 day and 100,000 years that have a wide variety of applications including public health, medicine,industrial technology, food technology and packaging, agriculture, energy supply, and national security. This paper provides an overview of some of the most extensive applications of radioisotopes including some observations of future uses. Examples are discussed that indicate that the use of radioisotopes is almost unlimited and will continue to grow. There is a growing need for future applications development and production. 12 refs., 1 tab. (BM)

Tingey, G.L.; Dix, G.P.; Wahlquist, E.J.

1990-11-01T23:59:59.000Z

106

Methodology for ranking geothermal reservoirs in non-electric industrial applications  

DOE Green Energy (OSTI)

A large number of geothermal reservoirs exist and to perform a thorough study of each of these reservoirs to determine those most desirable for demonstration projects can be costly and time consuming. A methodology for assigning rankings to these reservoirs, given a limited amount of data, is presented. The top ranked reservoirs would then be studied more thoroughly. In addition, a methodology for ranking the large number of industries that could possibly utilize geothermal energy in nonelectric applications is given to determine those industries which will have the most impact on national energy demand if converted to geothermal use.

Farah, O.G.; Williams, F.

1976-05-01T23:59:59.000Z

107

Proceedings of ISEC 2008, International Solvent Extraction Conference - Solvent Extraction: Fundamentals to Industrial Applications  

Science Conference Proceedings (OSTI)

The North American industry has employed major solvent-extraction processes to support a wide range of separations including but not limited to chemical, metallurgical, nuclear, biochemical, pharmaceutical, and petroleum applications. The knowledge enabling these separations has been obtained through fundamental studies in academe, government and industry. The International Solvent Extraction Conferences have been and continue to be a major gathering of scientists, engineers, operators, and vendors from around the world, who present new findings since the last meeting, exchange ideas, make business contacts, and conduct collegial discussions. The ISEC 2008 program emphasizes fundamentals to industrial applications of solvent extraction, particularly how this broad spectrum of activities is interconnected and has led to the implementation of novel processes. The oral and poster sessions have been organized into seven topics: Fundamentals; Novel Reagents, Materials and Techniques; Nuclear Fuel Reprocessing; Hydrometallurgy and Metals Extraction; Analytical and Preparative Applications; Biotechnology, Pharmaceuticals, Life-Science Products, and Organic Products; and Process Chemistry and Engineering. Over 350 abstracts were received, resulting in more than 260 manuscripts published in these proceedings. Five outstanding plenary presentations have been identified, with five parallel sessions for oral presentations and posters. In recognition of the major role solvent extraction (SX) plays in the hydrometallurgical and nuclear industries, these proceedings begin with sections focusing on hydrometallurgy, process chemistry, and engineering. More fundamental topics follow, including sections on novel reagents, materials, and techniques, featuring novel applications in analytical and biotechnology areas. Despite the diversity of topics and ideas represented, however, the primary focus of the ISEC community continues to be metals extraction. Four papers from these proceedings have been entered already in INIS in the form of individual reports. Among the remaining papers, 60 have been selected from the following sessions: Plenary Lectures, Hydrometallurgy and Metals Extraction, Nuclear Fuel Reprocessing, Analytical and Preparative Applications, Fundamentals, and Novel Reagents, Materials, and Techniques.

Moyer, Bruce A. (ed.)

2008-07-01T23:59:59.000Z

108

The Industrial Tools of the Trade  

Science Conference Proceedings (OSTI)

Organized by R&D Applications Centers/Offices, this handbook provides TechCommentaries (including a description of a technology, technical considerations, economic considerations, applications, advantages), TechApplications (featuring case study information on an attractive technology), and Industry Briefs (describing a particular industry with data and trends on energy use, employment, revenue, manufacturing methods, demand-side management methods, trade associations, and information sources).

1995-12-01T23:59:59.000Z

109

THE APPLICATION OF THE SXF LATTICE DESCRIPTION AND THE UAL SOFTWARE ENVIRONMENT TO THE ANALYSIS OF THE LHC.  

SciTech Connect

A software environment for accelerator modeling has been developed which includes the UAL (Unified Accelerator Library), a collection of accelerator physics libraries with a Per1 interface for scripting, and the SXF (Standard eXchange Format), a format for accelerator description which extends the MAD sequence by including deviations from design values. SXF interfaces have been written for several programs, including MAD9 and MAD8 via the doom database, Cosy, TevLat and UAL itself, which includes Teapot++. After an overview of the software we describe the application of the tools to the analysis of the LHC lattice stability, in the presence of alignment and coupling errors, and to the correction of the first turn and closed orbit in the machine.

FISCHER,W.; PILAT,F.; PTITSON,V.

1999-03-29T23:59:59.000Z

110

Pulse combustion: Commercial, industrial, and residential applications. (Latest citations from the NTIS Bibliographic database). Published Search  

SciTech Connect

The bibliography contains citations concerning the evolution of pulse combustion, the types of pulse combustion burners and their applications, and selected fuels utilized. Topics include fuel combustion efficiency, energy conversion and utilization technologies, modeling of chemical kinetics, and dynamics and thermal characteristics of pulse combustors. Pulse combustion systems for water heaters, gas furnaces, industrial and residential boilers, commercial cooking equipment, and space heating devices are presented. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-10-01T23:59:59.000Z

111

The application of neural networks with artificial intelligence technique in the modeling of industrial processes  

Science Conference Proceedings (OSTI)

Neural networks are a relatively new artificial intelligence technique that emulates the behavior of biological neural systems in digital software or hardware. These networks can 'learn', automatically, complex relationships among data. This feature makes the technique very useful in modeling processes for which mathematical modeling is difficult or impossible. The work described here outlines some examples of the application of neural networks with artificial intelligence technique in the modeling of industrial processes.

Saini, K. K.; Saini, Sanju [CDLM engg. College Panniwala Mota, Sirsa and Murthal, Sonipat, Haryana (India)

2008-10-07T23:59:59.000Z

112

Industry | OpenEI  

Open Energy Info (EERE)

Industry Industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by other industries and construction. Data is only available for Paraguay and the U.S., years 2000 to 2007. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption Industry UN Data application/zip icon XML (zip, 514 bytes) application/zip icon XLS (zip, 425 bytes) Quality Metrics

113

Brookhaven air infiltration measurement system (BNL/AIMS) description and application  

SciTech Connect

A unique capability to measure part-per-quadrillion concentrations of a family of perfluorocarbon tracers (PFTs) is presented. Together with our unique PFT source and passive sampler, measurement of average air exchange and infiltration rate can be determined for periods as short as 12 hours. A more expensive programmable sampler can provide information on a frequency of as little as once per minute for each of its 23 sampling tubes. The principal of AIMS is based on the applicable steady-state assumption that the average concentration (e.g., in pL/L) of a tracer vapor in a chamber (i.e., a building or room) is equal to the emission rate of the tracer source (e.g., in pL/min) divided by the air leakage or infiltration rate (e.g., in L/min). Knowing the source rate and measuring the average concentration then provides a means to calculate the air leakage rate. Extending this technique to a multichamber concept, in which a different type of PFT source is deployed in each chamber of a building, allows the calculation of not only the infiltration rates in each chamber but also the air exchange rates between chambers as well. Since both the PFT source and the passive sampler, a miniature Capillary Adsorption Tube Sampler (CATS), are about the size of a cigarette, inexpensive, and reusable, the BNL/AIMS is a very cost-effective means (if not the only means) for determining these air exchange rates.

Dietz, R.N.; Goodrich, R.W.; Cote, E.A.; Wieser, R.F.

1983-08-01T23:59:59.000Z

114

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Description Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference Industry Meetings Draft- Solicitation Synopsis...

115

Studies of a small PWR for onsite industrial power  

SciTech Connect

Information on the use of a 300 to 400 MW(t) PWR type reactor for industrial applications is presented concerning the potential market, reliability considerations, reactor plant description, construction techniques, comparison between nuclear and fossil-fired process steam costs, alternative fossil-fired steam supplies, and industrial application.

Klepper, O.H.; Smith, W.R.

1977-04-19T23:59:59.000Z

116

Testbed Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Testbed Description R&D Overview 100G Testbed Testbed Description Testbed Results Current Testbed Research Proposal Process Terms and Conditions Virtual Circuits (OSCARS)...

117

Ultra-High Gradient Compact S-Band Linac for Laboratory and Industrial Applications  

SciTech Connect

There is growing demand from the industrial and research communities for high gradient, compact RF accelerating structures. The commonly used S-band SLAC-type structure has an operating gradient of only about 20 MV/m; while much higher operating gradients (up to 70 MV/m) have been recently achieved in X-band, as a consequence of the substantial efforts by the Next Linear Collider (NLC) collaboration to push the performance envelope of RF structures towards higher accelerating gradients. Currently however, high power X-band RF sources are not readily available for industrial applications. Therefore, RadiaBeam Technologies is developing a short, standing wave S-band structure which uses frequency scaled NLC design concepts to achieve up to a 50 MV/m operating gradient at 2856 MHz. The design and prototype commissioning plans are presented.

Faillace, Luigi; /RadiaBeam Tech.; Agustsson, Ronald; /RadiaBeam Tech.; Frigola, Pedro; /RadiaBeam Tech.; Murokh, Alex; /RadiaBeam Tech.; Dolgashev, Valery; /SLAC; Rosenzweig, James; /UCLA

2012-07-03T23:59:59.000Z

118

Two case studies of the application of solar energy for industrial process heat  

DOE Green Energy (OSTI)

Case studies of industrial process heat (IPH) have been performed by the Solar Energy Research Institute (SERI) on selected plants in metal processing, oil production, beverage container manufacturing, commercial laundering, paint (resin manufacturing), and food industries. For each plant, the application of solar energy to processes requiring hot water, hot air, or steam was examined, after energy conservation measures were included. A life-cycle economic analysis was performed for the solar system compared to the conventional energy system. The studies of the oil production facility (oil/water separation process) indicate that it could economically employ a solar hot water system immediately. The studies of solar energy applied to the beverage container process (solar air preheat system with partial recycle of oven exhaust gases) indicate a 7.5-yr payback period, based on a solar system installation in 1985.

Hooker, D. W.; West, R. E.

1979-10-01T23:59:59.000Z

119

A New Scheme on Robust Observer Based Control Design for Nonlinear Interconnected Systems with Application to an Industrial Utility Boiler  

E-Print Network (OSTI)

with Application to an Industrial Utility Boiler Adarsha Swarnakar, Horacio Jose Marquez and Tongwen Chen Abstract. The controller design is evaluated on a natural circulation drum boiler, where the nonlinear model describes

Marquez, Horacio J.

120

Highlights of Industrial Energy Audits with Application in Paper Product Manufacturing  

E-Print Network (OSTI)

Experience in executing comprehensive energy audits in varied industrial plants has resulted in a basic audit methodology and has revealed several interesting energy conservation opportunities applicable to paper products manufacturing. The most difficult and important part of an energy audit is the data collection that is necessary to fully understand the energy flows in the facility. Although many common opportunities exist that can be found in check lists, many opportunities are discovered only by a thorough understanding of the distribution of energy consumption that comes from detailed measurements and data analysis.

Hart, M. N.; Bond, S. K.

1979-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Test bench for studying the outlook for industrial applications of an oxygen-iodine laser  

Science Conference Proceedings (OSTI)

We report the development and tests of a chemical oxygen-iodine laser test bench based on a twisted-aerosol-flow singlet-oxygen generator and a supersonic laser model for studying the outlook for industrial applications of this laser. The maximal output power of the laser is {approx}65 kW (the average power is {approx}50 kW), corresponding to a specific output power of {approx}110 W cm{sup -2}. The maximal chemical efficiency is {approx}34%. (letters)

Adamenkov, A A; Bakshin, V V; Bogachev, A V; Buryak, E V; Vdovkin, L A; Velikanov, S D; Vyskubenko, B A; Garanin, Sergey G; Gorbacheva, E V; Grigorovich, Sergei V; Il'in, S P; Il'kaev, R I; Ilyushin, Yurii N; Kalashnik, A M; Kolobyanin, Yu V; Leonov, M L; Svischev, V V; Troshkin, M V [Russian Federal Nuclear Center 'All-Russian Scientific Research Institute of Experimental Physics', Sarov, Nizhnii Novgorod Region (Russian Federation)

2007-07-31T23:59:59.000Z

122

The OSHA and EPA programs on preventing chemical accidents and potential applications in the photovoltaic industry  

DOE Green Energy (OSTI)

OSHA issued in 1992, the Process Safety Management (PSM) of Highly Hazardous Substances. This rule requires owners/operators of facilities that handle hazardous chemicals in quantities greater than the listed thresholds to establish all the elements of a PSM. EPA has issued in June 1996, the rules for a Risk Management Program which also refers to specific substances and threshold quantities. These rules are applicable to all the facilities that use or store any of 139 regulated substances at quantities ranging from 100 lb to 10,000 lb. The RMP rule covers off-site hazards, while the OSHA Process Safety Management (PSM) rule covers worker safety issues within the plant boundary. Some of the listed substances may be found in photovoltaic manufacturing facilities. This brief report presents the basic elements of these two rules and discusses their potential applicability in the photovoltaic industry.

Fthenakis, V.M.

1996-08-01T23:59:59.000Z

123

Nano-Scale Interpenetrating Phase Composites (IPC S) for Industrial and Vehicle Applications  

Science Conference Proceedings (OSTI)

A one-year project was completed at Oak Ridge National Laboratory (ORNL) to explore the technical and economic feasibility of producing nano-scale Interpenetrating Phase Composite (IPC) components of a usable size for actual testing/implementation in a real applications such as high wear/corrosion resistant refractory shapes for industrial applications, lightweight vehicle braking system components, or lower cost/higher performance military body and vehicle armor. Nano-scale IPC s with improved mechanical, electrical, and thermal properties have previously been demonstrated at the lab scale, but have been limited in size. The work performed under this project was focused on investigating the ability to take the current traditional lab scale processes to a manufacturing scale through scaling of these processes or through the utilization of an alternative high-temperature process.

Hemrick, James Gordon [ORNL; Hu, Michael Z. [ORNL

2010-06-01T23:59:59.000Z

124

Pahoa geothermal industrial park. Engineering and economic analysis for direct applications of geothermal energy in an industrial park at Pahoa, Hawaii  

DOE Green Energy (OSTI)

This engineering and economic study evaluated the potential for developing a geothermal industrial park in the Puna District near Pahoa on the Island of Hawaii. Direct heat industrial applications were analyzed from a marketing, engineering, economic, environmental, and sociological standpoint to determine the most viable industries for the park. An extensive literature search produced 31 existing processes currently using geothermal heat. An additional list was compiled indicating industrial processes that require heat that could be provided by geothermal energy. From this information, 17 possible processes were selected for consideration. Careful scrutiny and analysis of these 17 processes revealed three that justified detailed economic workups. The three processes chosen for detailed analysis were: an ethanol plant using bagasse and wood as feedstock; a cattle feed mill using sugar cane leaf trash as feedstock; and a papaya processing facility providing both fresh and processed fruit. In addition, a research facility to assess and develop other processes was treated as a concept. Consideration was given to the impediments to development, the engineering process requirements and the governmental support for each process. The study describes the geothermal well site chosen, the pipeline to transmit the hydrothermal fluid, and the infrastructure required for the industrial park. A conceptual development plan for the ethanol plant, the feedmill and the papaya processing facility was prepared. The study concluded that a direct heat industrial park in Pahoa, Hawaii, involves considerable risks.

Moreau, J.W.

1980-12-01T23:59:59.000Z

125

industrial sector | OpenEI  

Open Energy Info (EERE)

industrial sector industrial sector Dataset Summary Description Biomass energy consumption and electricity net generation in the industrial sector by industry and energy source in 2008. This data is published and compiled by the U.S. Energy Information Administration (EIA). Source EIA Date Released August 01st, 2010 (4 years ago) Date Updated August 01st, 2010 (4 years ago) Keywords 2008 biomass consumption industrial sector Data application/vnd.ms-excel icon industrial_biomass_energy_consumption_and_electricity_2008.xls (xls, 27.6 KiB) Quality Metrics Level of Review Peer Reviewed Comment Temporal and Spatial Coverage Frequency Annually Time Period 2008 License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset Usefulness of the metadata

126

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS,VOL. 32, NO. 5, SEPTEMBEFUOCTOBER1996 1051 A Physicochemical Explanation for Flow  

E-Print Network (OSTI)

the kinetics of the wall surface reactions with the additives. Thus, analysis of these chemical reactions APPLICATIONS, VOL. 32, NO. 5, SEFTEMBEFVOCTOBER1996 with kl and k-2 representing the kinetic constants of wallIEEE TRANSACTIONS ON INDUSTRY APPLICATIONS,VOL. 32, NO. 5, SEPTEMBEFUOCTOBER1996 1051

Patzek, Tadeusz W.

127

An evolution of technologies and applications of gamma imagers in the nuclear cycle industry  

SciTech Connect

The tracking of radiation contamination and distribution has become a high priority in the nuclear cycle industry in order to respect the ALARA principle which is a main challenge during decontamination and dismantling activities. To support this need, AREVA/CANBERRA and CEA LIST have been actively carrying out research and development on a gamma-radiation imager. In this paper we will present the new generation of gamma camera, called GAMPIX. This system is based on the Timepix chip, hybridized with a CdTe substrate. A coded mask could be used in order to increase the sensitivity of the camera. Moreover, due to the USB connection with a standard computer, this gamma camera is immediately operational and user-friendly. The final system is a very compact gamma camera (global weight is less than 1 kg without any shielding) which could be used as a hand-held device for radioprotection purposes. In this article, we present the main characteristics of this new generation of gamma camera and we expose experimental results obtained during in situ measurements. Even though we present preliminary results the final product is under industrialization phase to address various applications specifications. (authors)

Khalil, R. A. [AREVA/CANBERRA - Nuclear Measurements Business Unit (France); Carrel, F. [CEA, LIST, F-91191 Gif-sur-Yvette (France); Menaa, N.; De Toro, D. [AREVA/CANBERRA - Nuclear Measurements Business Unit (France); Schoepff, V.; Gmar, M. [CEA, LIST, F-91191 Gif-sur-Yvette (France); Varet, T. [AREVA/Nuclear Site Value Development Business Unit (France); Toubon, H. [AREVA/CANBERRA - Nuclear Measurements Business Unit (France)

2011-07-01T23:59:59.000Z

128

New industrial heat pump applications to an integrated thermomechanical pulp and paper mill  

Science Conference Proceedings (OSTI)

Application of pinch technology US industries in an early screening study done by TENSA Services (DOE/ID/12583-1) identified potential for heat pumps in several industrial sectors. Among these, processes with large evaporation units were found to be some of the most promising sectors for advanced heat pump placement. This report summarizes the results of a study for Bowater Incorporated, Carolina Division. The units selected for this study are the thermo-mechanical pulper (TMP), kraft digester, evaporators, boiler feed water (BFW) train and pulp dryer. Based on the present level of operation, the following recommendations are made: 1. Install a mechanical vapor compression (MVR) heat pump between the TMP mill and {number sign}3 evaporator. This heat pump will compress the 22 psig steam from the TMP heat recovery system and use it to replace about 70% of the 60 psig steam required in {number sign} evaporator. The boiler feed water heat losses (in the low pressure deaerator) will be supplied by heat available in the TMR's zero psig vent steam. 2. Study the digester to verify the practicality of installing an MVR heat pump which will compress the dirty weapons from the cyclone separator. The compressed vapors can be directly injected into the digester and thus reduce the 135 psig steam consumption. 31 figs., 9 tabs.

Not Available

1991-01-01T23:59:59.000Z

129

Method for evaluating the potential of geothermal energy in industrial process heat applications  

DOE Green Energy (OSTI)

A method is presented for evaluating the technical and economic potential of geothermal energy for industrial process heat applications. The core of the method is a computer program which can be operated either as a design analysis tool to match energy supplies and demands, or as an economic analysis tool if a particular design for the facility has already been selected. Two examples are given to illustrate the functioning of the model and to demonstrate that results reached by use of the model closely parallel those that have been determined by more traditional techniques. Other features of interest in the model include: (1) use of decision analysis techniques as well as classical methods to deal with questions relating optimization; (2) a tax analysis of current regulations governing percentage depletion for geothermal deposits; and (3) development of simplified correlations for the thermodynamic properties of salt solutions in water.

Packer, M.B.; Mikic, B.B.; Meal, H.C., Guillamon-Duch, H.

1980-05-01T23:59:59.000Z

130

Stone Description  

Science Conference Proceedings (OSTI)

United States, Minnesota, Sandstone, Jordan, 9RA33, 26687, y, Front Face (South), Dscf0282.jpg. No 9RA33 is: Description. buff. rust-spotted. fine grain ...

131

Original Workshop Proposal and Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Proposal and Description Visualization Requirements for Computational Science and Engineering Applications Proposal for a DoE Workshop to Be Held at the...

132

Improved motors for utility applications. Volume 2. Industry assessment study. Final report  

SciTech Connect

Auxiliary drive motor failures in electric utility applications result in large repair costs and, energy replacement costs. In order to assess the motor reliability experience of the utility industry and identify specific problem areas, information or more than 4800 motors at 132 generating units owned by 56 utilities was collected. The computerized database encompasses all fuel sources, geographic factors and motor manufacturers. Analysis of the data, field interviews with utilities across the country and technical judgment were used to identify the major factors influencing motor reliability. In total, 1221 failures were reported which represents a rate of 4.6% failure per motor per year. Several utilities reported experience as good as 1 or 2% and others as poor as 12%. Although all manufacturers can supply reliable equipment for most applications, failures of specific components in certain specific applications appear to be associated with specific manufacturers. However, overall, 22% of all reported failures were attributed to winding failure and 13% to sleeve bearings. Numerous examples of misapplication were discovered such as the horizontal motor which was vertically mounted by an OEM, inadequately balanced hydraulic thrust loads in a packaged motor/pump system and inappropriate enclosure specified for a motor located outdoors.The internal procedures and practices of those utilities which had particularly low failure rate experience included such factors as, stringent specifications, objective purchasing policies, adequate record keeping and preventative maintenance programs. Auxiliary large drive motor failures are estimated to cost the average utility over $350,000 per unit per year for alternate energy source during outages. Future cooperative efforts by the manufacturers, the A and E firms, the OEM's and the utilities could significantly reduce this value.

Mighdoll, P.; Bloss, R.P.; Hayashi, F.

1982-10-01T23:59:59.000Z

133

Application of fundamental kinetic modeling to industrial chlorination and partial oxidation processes  

E-Print Network (OSTI)

The Fundamental Kinetic Modeling (FKM) method is able to use a growing amount of elementary kinetic rate constant data to simulate industrial reactions and therefore gain insight and predictive capabilities beyond those of traditional empirical kinetic models. Because traditional empirical kinetic models often simplify the underlying kinetics into a single overall reaction, these recently determined values cannot be used directly. In addition to simulating irreducible chemical events as opposed to an overall reaction, the FKM does not make assumptions about microscopic reversibility. To obtain the reverse rate constants, the thermophysical properties for the species are required. Advances in computing technology have made ab initio quantum chemical calculations feasible for oxygenated and chlorinated hydrocarbons. Thermophysical properties for species that cannot be obtained experimentally are now available with greater accuracy than using prior estimating techniques. The FKM method is able to use these values to obtain information about temperature and concentration profiles as well as product distributions and selectivities for a variety of reactor configurations. The application of the FKM method to industrial reactions could be used to optimize existing operating conditions or to predict novel processes. One such chemistry is the oxychlorination of ethane to vinyl chloride. The problem is most easily solved in three steps: the development of a thermal chlorination model, the development of a partial oxidation model, and the combination of the two models with the necessary additional species and reactions. This work focuses on the first two steps. A thermal chlorination model is verified against two sources of experimental data with good quantitative agreement. In addition, differences in product distributions are explained by examining the kinetic pathways. Also, an existing partial oxidation model is combined with newly calculated thermophysical properties. The agreement with two experimental data sources is not as good quantitatively; however, qualitative agreement is observed. Areas for improvement to obtain quantitative agreement are determined.

Han, Joseph Hsiao-Tien

2000-01-01T23:59:59.000Z

134

Review of Cyclotron Production and Quality Control of High Specific Activity Radionuclides for Biomedical, Biological, Industrial and Environmental Applications at INFN-LASA  

E-Print Network (OSTI)

Review of Cyclotron Production and Quality Control of High Specific Activity Radionuclides for Biomedical, Biological, Industrial and Environmental Applications at INFN-LASA

Birattari, C; Groppi, F; Gini, L

2001-01-01T23:59:59.000Z

135

Application platform suite software vendors' strategies in standards driven industry networks  

E-Print Network (OSTI)

The emergence of industry standards often has disruptive impacts on the behavior of markets. It can drive commoditization, substitution and convergence. It also changes the industry structure creating new business models ...

Phua, Boon Chung, 1969-

2004-01-01T23:59:59.000Z

136

Program on Technology Innovation: Decision-Centered Guidelines for the Design of Human System Interfaces for Electric Power Industry Applications  

Science Conference Proceedings (OSTI)

Decision-centered guidelines support improved user decision making across a broad range of electric power industry application areas. The guidelines will aid in the design of user-centered human-system interfaces (HSIs), while increasing the beneficial uses of new technologies for electric power generation, transmission, and distribution (GTD) systems. Decision-centered guidelines are applicable to system designs involving new technology that will transform current user tasks, responsibilities, ...

2012-09-24T23:59:59.000Z

137

Stone Description  

Science Conference Proceedings (OSTI)

United States, New York, Limestone, Sandy Hill, 8RA6, 26828, y, Front Face (South), Dscf0268_6.jpg. No 8RA6 is: Description. dark gray. fine grain. ...

138

Process Parameters and Energy Use of Gas and Electric Ovens in Industrial Applications  

E-Print Network (OSTI)

The study was conducted to evaluate the energy use of natural gas and electric ovens in the production of polymer bearings and components. Tests were conducted to evaluate and compare the performance of natural gas and electric ovens in the process of sintering billets which are made from a broad range of materials such as PTFE and other fluoropolymers, elastomers, themosets, themoplastics and composites. The purpose of this study was to compare the process parameters under similar conditions for industrial applications where electric ovens have predominant use. Tests were performed to obtain the process efficiency and examine cost savings potential in converting electric ovens to natural gas. Preliminary results show that, for the plat studied, cost savings of about $10,000 per oven can be achieved, with a simple payback period of less than two years. The results also show that additional energy savings will be realized if the oven size and exhaust flow are carefully selected. The data obtained from these experiments were used to calculate process efficiency. Design features and environmental issues are discussed.

Kosanovic, D.; Ambs, L.

2000-04-01T23:59:59.000Z

139

Application of solar energy to industrial drying or dehydration processes. Final report  

DOE Green Energy (OSTI)

The application of a solar energy system to the Lawrence, Kansas alfalfa dehydration plant, owned by the Western Alfalfa Corporation, is an attractive opportunity to demonstrate the feasibility of using solar energy to supply industrial process heat. The work undertaken for this project is reviewed. The design parameters of the dehydrator, including the energy consumed by the plant, the airflow requirements of the dehydrator, and the interface between the dehydrator and the solar array are discussed. The design of the collector array, the selection of solar collectors, the calculation of collector areas for the array, and the simulations of the system performance are addressed. Discussions of the detailed engineering drawings and specifications of the array construction, duct work, air handling equipment, system controls, and data monitoring, and acquisition systems are presented. The results of the contractors' bids based on these drawings and specifications are given. An economic analysis of the solar system using the Lawrence Livermore Laboratory format is presented. Finally, the impact of the solar system on the process energy requirements and on the operation of the plant are discussed. (WHK)

Not Available

1977-03-17T23:59:59.000Z

140

Inventory and case studies of Louisiana, non-electric industrial applications of geopressured geothermal resources. Quarterly progress report, March 1-May 31, 1977  

DOE Green Energy (OSTI)

An inventory is provided of geopressured geothermal resources in Louisiana. The Louisiana industries; classified as Food and Kindred Products were cataloged and inventoried to determine potential and specific uses of the known energy resources. The possibility of relocating industries to the available resources is explored. Individual case studies are presented for near term industrial conversion for resource application. (MHR)

Schnadelbach, T.W. Jr.

1977-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description Discover E (Engineering) is an evening of interesting, interactive and fun engineering, science, math, and technology demonstrations for K-12 students and their parents or guardians. It is held in conjunction with National Engineers Week which is celebrated at the time of George Washington's birthday, our nation's first President, who was a military engineer and land surveyor. Activities include 30-50 interactive demonstrations of basic engineering, science, technology and math principles that may include robots, reverse engineering, casting, crystal structures, forensic science, the effects of liquid nitrogen, slide rule, sound waves, electrostatics, mechanics, materials properties and materials

142

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National Laboratory. * teaches modern geophysical exploration techniques: seismic reflection and refraction, gravity and magnetics, electromagnetics (including magnetotellurics), and electrical resistivity * involves extensive hands-on field experience * integrates geophysical methods to solve real

143

Geothermal potential for commercial and industrial direct heat applications in Salida, Colorado. Final report  

DOE Green Energy (OSTI)

The Salida Geothermal Prospect (Poncha Hot Springs) was evaluated for industrial and commercial direct heat applications at Salida, Colorado, which is located approximately five miles east of Poncha Hot Springs. Chaffee Geothermal, Ltd., holds the geothermal leases on the prospect and the right-of-way for the main pipeline to Salida. The Poncha Hot Springs are located at the intersection of two major structural trends, immediately between the Upper Arkansas graben and the Sangre de Cristo uplift. Prominent east-west faulting occurs at the actual location of the hot springs. Preliminary exploration indicates that 1600 gpm of geothermal fluid as hot as 250/sup 0/F is likely to be found at around 1500 feet in depth. The prospective existing endusers were estimated to require 5.02 x 10/sup 10/ Btu per year, but the total annual amount of geothermal energy available for existing and future endusers is 28.14 x 10/sup 10/ Btu. The engineering design for the study assumed that the 1600 gpm would be fully utilized. Some users would be cascaded and the spent fluid would be cooled and discharged to nearby rivers. The economic analysis assumes that two separate businesses, the energy producer and the energy distributor, are participants in the geothermal project. The producer would be an existing limited partnership, with Chaffee Geothermal, Ltd. as one of the partners; the distributor would be a new Colorado corporation without additional income sources. Economic evaluations were performed in full for four cases: the Base Case and three alternate scenarios. Alternate 1 assumes a three-year delay in realizing full production relative to the Base Case; Alternate 2 assumes that the geothermal reservoir is of a higher quality than is assumed for the Base Case; and Alternate 3 assumes a lower quality reservoir. 11 refs., 34 figs., 40 tabs.

Coe, B.A.; Dick, J.D.; Galloway, M.J.; Gross, J.T.; Meyer, R.T.; Raskin, R.; Zocholl, J.R.

1982-10-01T23:59:59.000Z

144

Applications of geothermal resources in the evaporation and crystallization industry. Final report, September 1976--October 1977  

DOE Green Energy (OSTI)

The objective in this study was to determine the technical and economic feasibility of using low-temperature geothermal energy (hot brines) in place of steam from conventional sources in the evaporation and crystallization industry. A survey of major industries was carried out in order to choose three industries that were significant users of energy, could utilize geothermal brine, and demonstrate the broad range of industrial evaporation and crystallization operations. The selected industries were the preserved fruit and vegetable, sugar and confectionary products, and chemical industries. From among each of the selected industries, an example case was chosen for technical and economic evaluation. This evaluation included use of the ''feed-and-bleed'' process for energy extraction from the low-temperature geothermal brine. This process was chosen as the best process to use because it provides one of the most efficient means of utilizing geothermal brine in evaporation/crystallization operations. This study concludes that, under certain conditions, geothermal energy could be used economically in the evaporation and crystallization industry. The factors that would most affect cost include geothermal resource characteristics (well flow, temperature, and distance of transportation); the energy extraction process chosen (the feed-and-bleed process uses the least amount of brine); and the duration of the evaporation/crystallization process. A program to aid in implementing the use of geothermal energy is included.

May, S.C.; Basuino, D.J.; Doyle, P.T.; Rogers, A.N.

1977-10-01T23:59:59.000Z

145

Technical and economic feasibility of thermal energy storage. Thermal energy storage application to the brick/ceramic industry. Final report  

DOE Green Energy (OSTI)

An initial project to study the technical and economic feasibility of thermal energy storage (TES) in the three major consumer markets, namely, the residential, commercial and industrial sectors is described. A major objective of the study was to identify viable TES applications from which a more concise study could be launched, leading to a conceptual design and in-depth validation of the TES energy impacts. This report documents one such program. The brick/ceramic industries commonly use periodic kilns which by their operating cycle require time-variant energy supply and consequently variable heat rejection. This application was one of the numerous TES opportunities that emerged from the first study, now available from the ERDA Technical Information Center, Oak Ridge, Tennessee, identified as Report No. COO-2558-1.

Glenn, D.R.

1976-10-01T23:59:59.000Z

146

The originating Section of this publication in the IAEA was: Industrial Applications and Chemistry Section International Atomic Energy Agency  

E-Print Network (OSTI)

developed and validated procedures and protocols for investigation of major industrial processes, including fluidized beds, sugar crystallizers, trickle bed reactors, cement rotary kilns, flotation cells, grinding mills, incinerators, wastewater treatment units and interwell communications in oil fields. Over the years, the IAEA has contributed substantial funding and effort to industrial applications of radiotracer technology. Significant progress has been made, enabling IAEA Member States to introduce the technology in well defined industrial processing fields and establish national and private radiotracer groups with the indigenous capacity to sustain and further develop the technology. There are currently more than 50 radiotracer groups in the developing Member States of the IAEA applying radiotracers in routine service to end users. This publication is the output of the above mentioned CRP. It provides the principles and state of the art of radiotracer methodology and technology as applied to industry and environment. It is expected to provide wider interest for further development of skills and confidence prior to carrying out field work. It facilitates transfer of technology from developed to developing countries and from nuclear research institutions to industrial end

Radiotracer Technology; Wagramer Strasse

2001-01-01T23:59:59.000Z

147

Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Description Project Description The Energy Policy Act of 2005 (EPAct 2005), the Energy Independence and Security Act of 2007 (EISA 2007), and Presidential Executive Order 13423 all contain requirements for Federal facilities to decrease energy consumption and increase the use of renewable energy by the year 2015. To provide leadership in meeting these requirements, DOE, in partnership with the General Services Administration (GSA), has installed a rooftop solar electric, or PV, system on the roof of DOE's headquarters in Washington, D.C. The 205 kilowatt (kW) installation is one of the largest of its kind in the Nation's capital. A display in the For- restal building will show the power output of the PV system during the day and the energy produced over

148

Virtual Grids: Resource Abstractions for Grid Applications 8/9/2004 The Virtual Grid Description Language: vgDL  

E-Print Network (OSTI)

of distributed grid application? - What resource models are sufficient to enable expression by the programmer CNode Execution DatabasesDatabases Figure 5. Parallel Workers and Databases EOL (EOL3) Smart-Distributed Databases Databases Figure 6. Smart-Distributed EOL (EOL4) Data Smart Distributed EOL (EOL5) EOL5 has all

Chien, Andrew A.

149

Robust Output Feedback Stabilization of Nonlinear Interconnected Systems with Application to an Industrial Utility Boiler  

E-Print Network (OSTI)

to an Industrial Utility Boiler Adarsha Swarnakar, Horacio Jose Marquez and Tongwen Chen Abstract-- This paper boiler (Utility boiler), where the nonlinear model describes the complicated dynamics of the drum

Marquez, Horacio J.

150

Mobile Augmented Reality in industrial applications: Approaches for solution of user-related issues  

Science Conference Proceedings (OSTI)

Augmented Reality (AR) uses computer-generated virtual information to enhance the users information access. While numerous previous studies have demonstrated the large potential of AR to improve industrial processes by enhancing product quality ...

Johannes Tumler; Fabian Doil; Rudiger Mecke; Georg Paul; Michael Schenk; Eberhard A. Pfister; Anke Huckauf; Irina Bockelmann; Anja Roggentin

2008-09-01T23:59:59.000Z

151

Survey of Instrumentation and Control Practices in the Process Industries for Application to the Power Utilities  

Science Conference Proceedings (OSTI)

With impending deregulation and ever-tightening environmental constraints, utilities are increasing their emphasis on maximizing operating efficiency and reducing maintenance and operational costs. It is likely that utilities can use the capabilities of modern control and information management systems more effectively than they currently do. This report documents lessons learned over many years by experts in the process industries that might benefit the utility industry as it transitions to a competitiv...

1999-04-08T23:59:59.000Z

152

Applications  

Science Conference Proceedings (OSTI)

Table 1   Commercial applications of refractory metals and alloys by industry...Rhenium, W-Re Process industries Heating and cooling coils Tantalum, Ta-Nb Shell and tube heat exchangers Tantalum Condensers Tantalum Tantalum-clad steel vessels Tantalum Distillation towers Tantalum Valves for hot sulfuric acid service Molybdenum, tantalum, Ta-Nb Expansion joints (bellows) Tantalum...

153

Review: A review of data mining applications for quality improvement in manufacturing industry  

Science Conference Proceedings (OSTI)

Many quality improvement (QI) programs including six sigma, design for six sigma, and kaizen require collection and analysis of data to solve quality problems. Due to advances in data collection systems and analysis tools, data mining (DM) has widely ... Keywords: Classification, Data mining, Data mining software, Design for six sigma, Knowledge discovery in databases, Manufacturing, Parameter optimisation, Prediction, Quality description, Quality improvement, Six sigma

Glser Kksal; ?nci Batmaz; Murat Caner Testik

2011-09-01T23:59:59.000Z

154

Applications  

Science Conference Proceedings (OSTI)

Table 2   Examples of applications and parts made with vacuum infusion...small aircraft Industrial Fan blades, part for fish counting unit, toilet bowl, oil

155

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Technology Description Property Type Text Pages using the property "Technology Description" Showing 25 pages using this property. (previous 25) (next 25) M MHK Technologies/14 MW OTECPOWER + MINIMIZE SURFACE ACTIVITIES TO REDUCE THE CAPITAL COST AND TO IMPROVE EFFICIENCY ALTERNATE WORKING FLUIDS ARE USED FOR ENHANCED POWER EFFICIENCY IN OPTEC POWER HYBRID CYCLES ARE USED TO IMPROVE POWER AND NEED WITH SUBSEA HEAT EXCHANGERS ADVANCED SUPPORTING VESSEL CONCEPT AND FREE STANDING RISER TECHNOLOGIES TO WITH STAND HARSH OCEAN ENVIRONMENT IN DEEPWATER HAD BEEN DEVELOPED FOR THIS OPTEC POWER IT IS THE ONLY RELIABLE AND PROFITABLE RENEWABLE ENERGY SOURCE FOR THE NEED OF WORLD ENERGY FOR THE NEXT DECADE DESALINATION AND HDROGEN PRODUCTION ARE LINKED TO THE POWER GENERATION OF THE OTEC POWER FOR SEVERAL BY PRODUCTS COST EFFECTIVE PRODUCTION CLEAN ENERGY AND CLEAN WATER IS THE GOAL OF OTECPOWER INC OUR 14 MW OTEC POWER COSTS 50 MILLION USD ALL EQUIPMENT HAD BEEN DESINGED AND A FEW OF THEM ARE TESTED FOR OIL AND GAS INDUSTRY APPLICATION WHICHA RE BEING USED FOR OTECPOWER A RELIABLE AND FEASIBLE OTECPOWER IS PROPOSED

156

Problem Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Description Description Model Domain 2-D Radial Grid System : 1000 m x 60 m 25 m 25 m 10 m Hydrate Zone 1000 m Shale Shale Discretization Model 1 (200 x 30) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 30 cells (5 x 5 m, 20 x 0.5 m, 5 x 5 m) Model 2 (200 x 11) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 11 cells (5 x 5 m, 1 x 10.0 m, 5 x 5 m) Model 3 (50 x 30) r direction : 50 cells logarithmically distributed from r w = 0.10795 m to r 50 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls")

157

Economic feasibility of solar-thermal industrial applications and selected case studies  

DOE Green Energy (OSTI)

The economic feasibility is assessed of utilizing solar energy to augment an existing fossil fuel system to generate industrial process heat. Several case studies in the textile and food processing industries in the southern United States were analyzed. Sensitivity analyses were performed, and comparisons illustrating the effects of the Economic Recovery Tax Act of 1981 were made. The economic desirability of the proposed solar systems varied with the type of system selected, location of the facility, state tax credits, and type of fuel displaced. For those systems presently not economical, the projected time to economic feasibility was ascertained.

Montelione, A.; Boyd, D.; Branz, M.

1981-12-01T23:59:59.000Z

158

Assessment of New Motor Technologies and their Applications: Evaluation of an advanced circulator pump for residential, commercial and industrial applications  

Science Conference Proceedings (OSTI)

Electric pumps are the workhorses behind several industrial processes that help transfer liquids, gases and slurries from one location to another. From simple water pumping systems to sophisticated oil refineries, electric pumps are used in many different areas. Electric pumps are also used in various capacities in the commercial and residential sectors from hot water circulation systems to pool pumps. This technical update provides an assessment of a new circulator pump technology that uses ...

2013-12-04T23:59:59.000Z

159

Design of a zigbee-based RFID network for industry applications  

Science Conference Proceedings (OSTI)

In this paper, the implementation of a ZigBee based integrated WSN and RFID system suitable for an industrial environment is explained. The overall system consists of a central monitoring station connected to local stations through Ethernet backbone. ... Keywords: rfid and zigbee, wireless networks, wns

Sumi M; Ebrahim A. Soujeri; Rahim Rajan; Harikrishnan A. I

2009-10-01T23:59:59.000Z

160

Application of quality function deployment in the semiconductor industry: A case study  

Science Conference Proceedings (OSTI)

In quality function deployment (QFD), the voice of the customer (VOC) is the critical factor in developing and producing a product that will meet or exceed customer requirements. This study integrates quality function deployment (QFD), management techniques ... Keywords: Customer satisfaction, Process management, Quality function deployment (QFD), Semiconductor industry, Voice of customer

Chee-Cheng Chen

2010-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Integration of High-Temperature Gas-Cooled Reactors into Industrial Process Applications  

DOE Green Energy (OSTI)

This report is a preliminary comparison of conventional and potential HTGR-integrated processesa in several common industrial areas: ? Producing electricity via a traditional power cycle ? Producing hydrogen ? Producing ammonia and ammonia-derived products, such as fertilizer ? Producing gasoline and diesel from natural gas or coal ? Producing substitute natural gas from coal, and ? Steam-assisted gravity drainage (extracting oil from tar sands).

Lee Nelson

2009-10-01T23:59:59.000Z

162

Integration of High-Temperature Gas-Cooled Reactors into Industrial Process Applications  

Science Conference Proceedings (OSTI)

This report is a summary of analyses performed by the NGNP project to determine whether it is technically and economically feasible to integrate high temperature gas cooled reactor (HTGR) technology into industrial processes. To avoid an overly optimistic environmental and economic baseline for comparing nuclear integrated and conventional processes, a conservative approach was used for the assumptions and calculations.

Lee Nelson

2011-09-01T23:59:59.000Z

163

The Applications of SMES for a Industrial Cogeneration Facility : A Case Study  

E-Print Network (OSTI)

This paper develops the coordination of load shedding scheme and presents the effect of superconducting magnetic energy storage (SMES) unit on improving the transient stability for a large industrial petroleum chemistry cogeneration facility. The proper mathematical models and accurate parameters of the power system network, generators, excitation systems, governor systems and loads in the Lin-Yuan plant of China Petroleum Corporation are investigated.

Yu-Lung Ke Member; Yu-lung Ke; Ieee Cheng-ting Hsu

2000-01-01T23:59:59.000Z

164

An application of neural network solution in the apparel industry for cutting time forecasting  

Science Conference Proceedings (OSTI)

Artificial Neural Network is proposed to handle to estimating of "marker making" cutting time. Estimating the optimum cutting time greatly affects the production efficiency and daily production capacity of the cutting department. Using ANN system in ... Keywords: Levenberg-Marquardt algorithm, apparel industry, artificial neural network, calculating of fabric lays quantities, fabric cutting time, length of marker making

Yelda Ozel; Mahmut Kayar

2008-09-01T23:59:59.000Z

165

Supercomputing applications to the numerical modeling of industrial and applied mathematics problems  

Science Conference Proceedings (OSTI)

Present and future supercomputers offer many opportunities and advantages to attack complex and demanding industrial and applied mathematical problems, but provide also new challenges. In the Peta-Flops regime, these ... Keywords: Fault-tolerance, Monte Carlo methods, Parallel computing, Scalability, Supercomputers, Supercomputing

Juan A. Acebrn; Renato Spigler

2007-04-01T23:59:59.000Z

166

Biobased Surfactants and Detergents Synthesis, Properties, and ApplicationsChapter 1 Biobased Surfactants: Overview and Industrial State-of-the-Art  

Science Conference Proceedings (OSTI)

Biobased Surfactants and Detergents Synthesis, Properties, and Applications Chapter 1 Biobased Surfactants: Overview and Industrial State-of-the-Art Surfactants and Detergents eChapters Surfactants - Detergents Press Downl

167

Guide to the Industrial Application of Motors and Variable-Speed Drives  

Science Conference Proceedings (OSTI)

This application guide is intended to aid in screening, selecting, and procuring specification processes for variable frequency drive (VFD) installations. It also is intended to provide a comprehensive up-to-date assessment of opportunities to save energy and improve power quality performance with state-of-the-art VFD technologies. The document supplies background information on electric motors and applications, describes VFD topologies, and details procurement specifications and application consideratio...

2001-09-27T23:59:59.000Z

168

FLAMELESS COMBUSTION APPLICATION FOR GAS TURBINE ENGINES IN THE AEROSPACE INDUSTRY.  

E-Print Network (OSTI)

??The objective of this thesis is to review the potential application of flameless combustion technology in aerospace gas turbine engines. Flameless combustion is a regime (more)

OVERMAN, NICHOLAS

2006-01-01T23:59:59.000Z

169

REVIEW OF INDUSTRIES AND GOVERNMENT AGENCIES FOR TECHNOLOGIES APPLICABLE TO DEACTIVATION AND DECOMMISSIONING OF NUCLEAR WEAPONS FACILITIES  

Science Conference Proceedings (OSTI)

The Deactivation and Decommissioning Focus Area's (DDFA's) mission is to develop, demonstrate, and deploy improved deactivation and decommissioning (D&D) technologies. This mission requires that emphasis be continually placed on identifying technologies currently employed or under development in other nuclear as well as nonnuclear industries and government agencies. In support of DDFA efforts to clean up the U.S. Department of Energy's (DOE's) radiologically contaminated surplus facilities using technologies that improve worker safety, reduce costs, and accelerate cleanup schedules, a study was conducted to identify innovative technologies developed for use in nonnuclear arenas that are appropriate for D&D applications.

Reilkoff, T. E.; Hetland, M. D.; O'Leary, E. M.

2002-02-25T23:59:59.000Z

170

Industrial Application of High Combustion Intensity Systems and Energy Conservation Implications  

E-Print Network (OSTI)

In the past decade industrial combustion technology has been advanced through adaptations of the equipment operating with dramatically reduced excess air requirements and use of air preheat techniques. The importance of operating industrial combustion equipment at stoichiometric conditions is emphasized. The calculated fuel savings resulting from elimination of excess air and use of heat recovery air preheat are reviewed. Design parameters for the aerodynamic design and control of the combustion process are quantified for vortex stabilized systems. Design analyses of the fuel injectors used with gaseous, liquid and pulverized coal fuels are also presented. The resulting high intensity combustion systems evolved are illustrated with photographs of flames in actual installations and during equipment development testing. Attention to detail in equipment manufacture and proper field adjustment of combustion equipment is essential in achieving the dramatic fuel savings that are possible.

Williams, F. D. M.; Anderson, L. E.

1982-01-01T23:59:59.000Z

171

Industrial application integration using the unification approach to agent-enabled semantic SOA  

Science Conference Proceedings (OSTI)

Within the enterprise, information infrastructure as the mean to bring together different software applications is the key component to enable cooperation and information and knowledge exchange in an open-distributed environment. The paper addresses ... Keywords: Agent platform, Application integration, Intelligent agents, Oil well drilling, Service-oriented architecture

Miguel Contreras; Leonid Sheremetov

2008-10-01T23:59:59.000Z

172

Activated charcoal filters: Water treatment, pollution control, and industrial applications. (Latest citations from the US Patent Bibliographic File with exemplary claims). Published Search  

SciTech Connect

The bibliography contains citations of selected patents concerning activated charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, and filtration of toxic materials and contaminants are described. Applications are discussed, including drinking water purification, air and water pollution control, manufacture of industrial materials, materials recovery, waste treatment, automotive fuel and exhaust systems, cigarette filters, ventilation systems, medical filtration, and odor absorbing materials. (Contains a minimum of 125 citations and includes a subject term index and title list.)

Not Available

1994-06-01T23:59:59.000Z

173

Activated-charcoal filters: water treatment, pollution control, and industrial applications. January 1970-July 1988 (citations from the US Patent data base). Report for January 1970-July 1988  

SciTech Connect

This bibliography contains citations of selected patents concerning activated-charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, industrial leaching, and filtration of toxic gases and pollutants are described. Applications include drinking water purification, filtering beverages, production of polymer materials, solvent and metal recovery, swimming pool filtration, waste conversion, automobile fuel and exhaust systems, and footwear deodorizing. (Contains 129 citations fully indexed and including a title list.)

Not Available

1988-08-01T23:59:59.000Z

174

Activated charcoal filters: Water treatment, pollution control, and industrial applications. (Latest citations from the US Patent Bibliographic file with exemplary claims). Published Search  

SciTech Connect

The bibliography contains citations of selected patents concerning activated charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, and filtration of toxic materials and contaminants are described. Applications are discussed, including drinking water purification, air and water pollution control, manufacture of industrial materials, materials recovery, waste treatment, automotive fuel and exhaust systems, cigarette filters, ventilation systems, medical filtration, and odor absorbing materials. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

NONE

1996-01-01T23:59:59.000Z

175

Activated charcoal filters: Water treatment, pollution control, and industrial applications. (Latest citations from the Patent Bibliographic database with exemplary claims. ) Published Search  

SciTech Connect

The bibliography contains citations of selected patents concerning activated charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, industrial leaching, and filtration of toxic materials and contaminants are described. Applications include drinking water purification, filtering beverages, production of polymer materials, solvent and metal recovery, waste conversion, automotive fuel and exhaust systems, swimming pool filtration, tobacco smoke filters, kitchen ventilators, medical filtration treatment, and odor absorbing materials. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-08-01T23:59:59.000Z

176

Moving HomePlug to Industrial Applications with Power-Line Communication Network  

E-Print Network (OSTI)

Home networking is becoming an attractive application not only for the Internet access but also for home automation. Being a high-speed and dominant standard presently, HomePlug has an important role in home LAN connecting ...

Zhao, Z.W.

177

Photovoltaic industry proposed changes for the 1999 national electrical code for PV applications  

SciTech Connect

An industry supported task group has recently completed writing proposals for changes in bring Article 690 of the 1999 National Electrical Code (NEC{reg_sign}) up to the state-of-the-art in photovoltaic device and system technology. This paper summarizes proposed code changes, discusses background on both new and changed, and presents examples for the proposed changes. Topics such as the proposed new temperature compensation table for calculating maximum system voltage are analyzed. Procedures for calculating conductor sizes with the proposed changes are presented. Impacts on photovoltaic installations, building integrated systems, and AC module installations are also analyzed.

Bower, W. [Sandia National Labs., Albuquerque, NM (United States); Wiles, J.C. [New Mexico State Univ., Las Cruces, NM (United States). Southwest Technology Development Institute

1997-06-01T23:59:59.000Z

178

Development of an XUV-IR free-electron laser user facility for scientific research and industrial applications  

Science Conference Proceedings (OSTI)

Los Alamos has designed and proposes to establish an XUV-IR free- electron laser (FEL) user facility for scientific research and industrial applications based on coherent radiation ranging from soft x-rays as short as 1 nm to far-infrared wavelengths as long as 100 {mu}m. As the next-generation light source beyond low-emittance storage rings with undulator insertion devices, this proposed national FEL user facility should make available to researchers broadly tunable, picosecond-pulse, coherent radiation with 10{sup 4} to 10{sup 7} greater spectral flux and brightness. The facility design is based on two series of FEL oscillators including one regenerative amplifier. The primary series of seven FEL oscillators, driven by a single, 1-GeV rf linac, spans the short-wavelength range from 1 to 600 nm. A second 60-MeV rf linac, synchronized with the first, drives a series of three Vis/IR FEL oscillators to cover the 0. 5 to 100-{mu}m range. This paper presents the motivation for such a facility arising from its inherently high power per unit bandwidth and its potential use for an array of scientific and industrial applications, describes the facility design, output parameters, and user laboratories, makes comparisons with synchrotron radiation sources, and summarizes recent technical progress that supports the technical feasibility. 80 refs., 9 figs., 6 tabs.

Newnam, B.E.; Warren, R.W.; Conradson, S.D.; Goldstein, J.C.; McVey, B.D.; Schmitt, M.J.; Elliott, C.J.; Burns, M.J.; Carlsten, B.E.; Chan, K.C.; Johnson, W.J.; Wang, T.S.; Sheffield, R.L.; Meier, K.L.; Olsher, R.H.; Scott, M.L.; Griggs, J.E.

1991-01-01T23:59:59.000Z

179

Thermal Energy Storage/Waste Heat Recovery Applications in the Cement Industry  

E-Print Network (OSTI)

The cement industry is the most energy-intensive industry in the United States in terms of energy cost as a percentage of the product according to a 1973 report by the Cost of Living Council. Martin Marietta Aerospace, Denver Division, and the Portland Cement Association have studied the potential benefits of using waste heat recovery methods and thermal energy storage systems in the cement manufacturing process. This work was performed under DOE Contract No. EC-77-C-01-50S4. The study has been completed and illustrates very attractive cost benefits realized from waste heat recovery/thermal storage systems. This paper will identify and quantify the sources of rejected energy in the cement manufacturing process, establish uses of this energy, exhibit various energy storage concepts, and present a methodology for selection of most promising energy storage systems. Two storage systems show the best promise - rock beds and draw salt storage. Thermal performance and detailed economic analyses have been performed on these systems and will be presented. Through use of thermal energy storage in conjunction with waste heat electric power generation units, an estimated 2.4 x 1013 BTU per year, or an equivalent of 4.0 x 10 barrels of oil per year, can be conserved. Attractive rates of return on investment of the proposed systems are an incentive for utilization and further development.

Beshore, D. G.; Jaeger, F. A.; Gartner, E. M.

1979-01-01T23:59:59.000Z

180

GEOCITY model: description and application  

DOE Green Energy (OSTI)

GEOCITY is a computer simulation model developed to study the economics of district heating using geothermal energy. GEOCITY calculates the cost of district heating based on climate, population, resource characteristics, and financing conditions. The principal input variables are minimum temperature, heating degree-days, population size and density, resource temperature and distance from load center, and the interest rate. From this input data the model designs the transmission and district heating systems. From this design, GEOCITY calculates the capital and operating costs for the entire system, including the production and disposal of the goethermal water.

McDonald, C.L.; Bloomster, C.H.

1977-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Proceedings of the 2011 Emerging M&S Applications in Industry and Academia Symposium  

Science Conference Proceedings (OSTI)

The EAIA symposium goes into its third year as an independent symposium! As in the recent years this symposium functions as the melting pot for new ideas and innovative applications of M&S that are not yet mature enough to fit into the traditional M&S ...

Andreas Tolk

2011-04-01T23:59:59.000Z

182

Improved Motors for Utility Applications, Volume 1: Industry Assessment Study: Update and Analysis  

Science Conference Proceedings (OSTI)

This comprehensive analysis of power plant motor failures, which updates an earlier data base, relates failure rates to operating and maintenance practices, as well as application and manufacture. Using the expanded analytic methodology, utilities can analyze the data for other factors significant to improving motor reliability.

1985-10-01T23:59:59.000Z

183

Early, Cost-Effective Applications of Photovoltaics in the Electric Utility Industry  

Science Conference Proceedings (OSTI)

Photovoltaic (PV)-powered systems can compete economically with conventional utility approaches such as distribution line extensions and step-down transformer installation for powering small electric loads. This study identified more than 60 cost-effective applications of PV-powered systems for utilities and their customers.

1994-01-01T23:59:59.000Z

184

Research Project Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Project Description No job description found Current Research Opportunities Regulatory Science Course Development Fellowship Health and Medical Emergency Management...

185

A coal-fired combustion system for industrial process heating applications. Quarterly technical progress report, July 1993--September 1993  

SciTech Connect

This advanced combustion system research program is for the development of innovative coal-fired process heaters which can be used for high temperature melting, smelting and waste vitrification processes. The process heater systems to be developed have multiple use applications; however, the Phase 3 research effort is being focused on the development of a process heater system to be used for producing value added vitrified glass products from boiler/incinerator ashes and industrial wastes. The primary objective of the Phase 3 project is to develop and integrate all the system components, from fuel through total system controls, and then test the complete system in order to evaluate its potential marketability. During the past quarter, the major effort was completing some of the system modification installation designs, completing industry funded testing, developing a surrogate TSCA ash composition, and completing the TSCA ash Test Plan. The installation designs will be used for the equipment modifications planned for the end of CY 93. The industry funded testing consisted of vitrifying Spent Aluminum Potliner (SPL) which is a listed hazardous waste. This testing has verified that SPL can be vitrified into a safe, recyclable glass product. Some results from this testing are provided in Section 2.2.1. The surrogate TSCA ash composition was developed with input from various DOE laboratories and subcontractors. The surrogate ash consists of a mixture of MSW fly ash and bottom ash spiked with heavy metal contaminants. The levels of metal additives are sufficient to ascertain the partitioning of the contaminants between the glass and effluent flow streams. Details of the surrogate composition and the planned testing is provided in Section 4.2.2.

Not Available

1993-10-30T23:59:59.000Z

186

Application of solar energy to industrial drying of soybeans: Phase III, performance evaluation. Final report  

DOE Green Energy (OSTI)

A 15-month performance evaluation was conducted on a solar system designed and constructed to augment the industrial drying of soybeans at the Gold Kist, Inc., extraction plant in Decatur, Alabama. The plant employs three oil-fired, continuous-flow dryers of 3,000 bu/hr each. The solar system consists of 672 Solaron air collectors that temper the airflow into the existing dryers. Since the requirement for energy exceeds the peak solar system capacity, no storage is provided. The interface with the existing facility is simply accomplished by three ducts that release the solar heated air directly adjacent to the dryer air intakes, and no mechanical coupling is needed. The solar system was operated for 1,752 hr on 290 days during the 15-month period without a single failure sufficient to cause shutdown. No interference with normal plant operations was experienced. Maintenance of the solar system, consisting of service to the air handling unit, cleaning of collector glazing, and minor duct repair, totaled $1,564. System utilization was only 46.3%. This was primarily due to daytime routine maintenance performed on the conventional drying and processing equipment. The solar fraction was not large enough to justify maintenance shift changes. An average collector efficiency of 26.2% was experienced. Contamination caused by the local plant environment reduced the average collector efficiency by 9.3 percentage points. A prototype of an automatic cleaning system was constructed and tested.

Hall, B.R.

1979-10-31T23:59:59.000Z

187

Preferences and concerns of potential users in the selection of solar thermal systems for industrial and small utility applications  

SciTech Connect

To achieve widespready application in the industrial and utility sectors, solar systems must be economically competitive. Economic viability is, in turn, determined by a number of supporting criteria, ranging from system reliability to dispatch characteristics to how the system supports the main product line. In addition, solar systems possess some inherent attributes that may render some of the traditional supporting criteria inappropriate or require their redefinition. Those criteria and their relation to the solar investments are discussed in three steps. First, the main concerns and preferences of the potential users, as identified in recent SERI studies, are identified. Second, the equitability of the resulting decision criteria for solar investments are examined. Finally, the implications of these criteria for solar energy's penetration into these markets are discussed.

Gresham, J.B.; Kriz, T.A.

1981-03-01T23:59:59.000Z

188

Expressive fuzzy description logics over lattices  

Science Conference Proceedings (OSTI)

It is generally accepted that the management of imprecision and vagueness will yield more intelligent and realistic knowledge-based applications. In this paper we present a fuzzy description logics framework based on certainty lattices. Our main feature ... Keywords: Certainty lattices, Description logics, Fuzzy description logics, Inverse roles, Role hierarchies, Transitive roles

Yuncheng Jiang; Yong Tang; Ju Wang; Peimin Deng; Suqin Tang

2010-03-01T23:59:59.000Z

189

Assessment of TEES reg sign applications for Wet Industrial Wastes: Energy benefit and economic analysis report  

DOE Green Energy (OSTI)

Fundamental work is catalyzed biomass pyrolysis/gasification led to the Thermochemical Environmental Energy System (TEES{reg sign}) concept, a means of converting moist biomass feedstocks to high-value fuel gases such as methane. A low-temperature (350{degrees}C), pressurized (3100 psig) reaction environment and a nickel catalyst are used to reduce volumes of very high-moisture wastes such as food processing byproducts while producing useful quantities of energy. A study was conducted to assess the economic viability of a range of potential applications of the process. Cases examined included feedstocks of cheese whey, grape pomace, spent grain, and an organic chemical waste stream. The analysis indicated that only the organic chemical waste process is economically attractive in the existing energy/economic environment. However, food processing cases will become attractive as alternative disposal practices are curtailed and energy prices rise.

Elliott, D.C.; Scheer, T.H.

1992-02-01T23:59:59.000Z

190

Notices Description: Entergy Services, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19 Federal Register 19 Federal Register / Vol. 76, No. 139 / Wednesday, July 20, 2011 / Notices Description: Entergy Services, Inc. Response to May 13, 2011 Deficiency Letter. Filed Date: 07/12/2011. Accession Number: 20110712-5164. Comment Date: 5 p.m. Eastern Time on Tuesday, August 02, 2011. Docket Numbers: ER11-2206-001. Applicants: Alta Wind V, LLC. Description: Alta Wind V, LLC, Notice of Non-Material Change in Status. Filed Date: 07/13/2011. Accession Number: 20110713-5091. Comment Date: 5 p.m. Eastern Time on Wednesday, August 03, 2011. Docket Numbers: ER11-3727-001. Applicants: El Segundo Energy Center LLC. Description: El Segundo Energy Center LLC submits tariff filing per 35.17(b): Supplement to Application for Market-Based Rate Authority to be effective 8/5/2011.

191

Industrial Biomass Energy Consumption and Electricity Net Generation by  

Open Energy Info (EERE)

47 47 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142281847 Varnish cache server Industrial Biomass Energy Consumption and Electricity Net Generation by Industry and Energy Source, 2008 Dataset Summary Description Biomass energy consumption and electricity net generation in the industrial sector by industry and energy source in 2008. This data is published and compiled by the U.S. Energy Information Administration (EIA). Source EIA Date Released August 01st, 2010 (4 years ago) Date Updated August 01st, 2010 (4 years ago) Keywords 2008 biomass consumption industrial sector Data application/vnd.ms-excel icon industrial_biomass_energy_consumption_and_electricity_2008.xls (xls, 27.6 KiB)

192

Gaseous Radiochemical Method for Registration of Ionizing Radiation and Its Possible Applications in Science and Industry  

E-Print Network (OSTI)

This work presents a new possibility of registration of ionizing radiation by the flowing gaseous radiochemical method (FGRM). The specified method uses the property of some solid crystalline lattice materials for a free emission of radioactive isotopes of inert gas atoms formed as a result of nuclear reactions. Generated in an ampoule of the detector, the radioactive inert gases are transported by a gas-carrier into the proportional gas counter of the flowing type, where the decay rate of the radioactive gas species is measured. This quantity is unequivocally related to the flux of particles (neutrons, protons, light and heavy ions) at the location of the ampoule. The method was used to monitor the neutron flux of the pulsed neutron target "RADEX" driven by the linear proton accelerator of INR RAS. Further progress of the FGRM may give rise to possible applications in nuclear physics, astrophysics and medicine, in the nondestructive control of fissionable materials, diagnostics of thermonuclear plasma, monitoring of fluxes and measurement of spectra of bombarding particles.

S. G. Lebedev; V. E. Yants

2005-10-06T23:59:59.000Z

193

Model-Checking CSP-Z: Strategy, Tool Support and Industrial Application  

E-Print Network (OSTI)

Model-checking is now widely accepted as an ecient method for analysing computer system properties, such as deadlock-freedom. Its practical applicability is due to existing automatic tools which deal with tedious proofs. Another research area of increasing interest is formal language integration where the capabilities of each language are used to capture precisely some aspects of a system. In this paper we propose a general strategy for model-checking CSP-Z specications using as tool support the FDR model-checker. The CSP-Z language is a semantical integration of CSP and Z, such that CSP handles the concurrent aspects of a system, and Z the data structures part. We also present a modular approach for model-checking complex CSP-Z specications, specically to verify deadlock-freedom. Finally, we present a CSP-Z specication for a subset of a real Brazilian articial microssatellite, and apply the proposed strategy to prove that this specication is deadlock-free. Key words: Model-Chec...

Alexandre Mota; Augusto Sampaio

2001-01-01T23:59:59.000Z

194

Combustion characterization of coals for industrial applications. Final technical report, January 1, 1981-May 29, 1985  

Science Conference Proceedings (OSTI)

In-depth fundamental information was obtained from a two-inch inner diameter laminar flow reactor referred to as the Drop Tube Furnace System (DTFS). This information consists of the following: (1) pyrolysis kinetic characteristics of four coals of various rank (Texas lignite, Montana subbituminous, Alabama high volatile bituminous, and Pennsylvania anthracite); and (2) combustion kinetic studies of chars produced from the foregoing parent coals. A number of standard ASTM and special in-house bench scale tests were also performed on the coals and chars prepared therefrom to characterize their physicochemical properties. The pilot scale (500,000 Btu/hr) Controlled Mixing History Furnace (CMHF) was used to determine the effect of staged combustion on NO/sub x/ emissions control from an overall combustion performance of the Alabama high volatile bituminous coal. The quantitative fundamental data developed from this study indicate significant differences in coal/char chemical, physical, and reactivity characteristics, which should be useful to those interested in modeling coal combustion and pyrolysis processes. These results underscore the fact that coal selection is one of the keys governing a successful coal conversion/utilization process. The combustion kinetic information obtained on the high volatile bituminous coal has been used in conjunction with combustion engineering's proprietary mathematical models to predict the combustion performance of this coal in the Controlled Mixing History Furnace. Comparison of the predicted data with the experimental results shows a virtually one-to-one scale-up from the DTFS to the CMHF. These data should provide vital information to designers in the area of carbon burnout and NO/sub x/ reduction for large scale coal utilization applications. 31 refs., 28 figs., 17 tabs.

Nsakala, N.; Patel, R.L.; Lao, T.C.

1985-03-01T23:59:59.000Z

195

Microsoft Word - 564M_Biomass_Project Descriptions FINAL 120409  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grant Grant Amount Non-Fed Amount Project Location (City) Project Location (State) Description 1) Pilot and Demonstration Scale FOA - Pilot Scale Algenol Biofuels Inc. $25,000,000 $33,915,478 Freeport TX This project will make ethanol directly from carbon dioxide and seawater using algae. The facility will have the capacity to produce 100,000 gallons of fuel- grade ethanol per year. American Process Inc. $17,944,902 $10,148,508 Alpena MI This project will produce fuel and potassium acetate, a compound with many industrial applications, using processed wood generated by Decorative Panels International, an existing hardboard manufacturing facility in Alpena. The pilot plant will

196

Aerospace and Industrial Applications of C/C, C/SiC, SiC/SiC ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2011. Symposium, Ceramic Matrix Composites. Presentation Title, Aerospace and Industrial...

197

Annotated compilation of the sources of information related to the usage of electricity in non-industrial applications. [Includes about 400 abstracts and glossary  

SciTech Connect

This report presents a thorough compilation of the sources of information related to the usage of electricity in non-industrial applications, as available in the open literature and from the U.S. electrical power industry. The report's scope encompasses all aspects of: electric load management; end use; and the various methods of acquisition, analysis and implementation of electricity usage data. There are over 400 abstracts; 156 from the Load Research Committee of Association of Edison Illuminating Companies (LRC/AEIC) reports and 264 from the open literature. The abstracts over references containing over 12,000 pages plus about 2,500 references and 6,200 graphs and tables pertinent to electricity usage in non-industrial applications. In addition to the LRC/AEIC abstracts, this document identifies over 100 sources of directly relevant information (in contrast to general interest sources and material of secondary relevance).

1978-07-01T23:59:59.000Z

198

An annotated compilation of the sources of information related to the usage of electricity in non-industrial applications. Final report  

SciTech Connect

The report is a thorough compilation of the sources of information related to the usage of electricity in non-industrial applications, as available in the open literature and from the U.S. electrical power industry. The report's scope encompasses all aspects of: electric load management; end-use; and the various methods of acquisition, analysis, and implementation of electricity usage data. There are over 400 abstracts; 156 from LRC/AEIC reports, and 264 from the open literature. The abstracts cover references containing over 12,000 pages plus about 2,500 references and 6,200 graphs and tables pertinent to electricity usage in non-industrial applications. In addition to the LRC/AEIC abstracts, this document identifies over 100 sources of directly relevant information (in contrast to general interest sources and material of secondary relevance).

Reznek, B.

1978-07-01T23:59:59.000Z

199

Applications of Genome-based Science in Shaping the World's Citrus Industries (JGI Seventh Annual User Meeting, 2012: Genomics of Energy and Environment)  

Science Conference Proceedings (OSTI)

Fred Gmitter from the University of Florida on "Applications of Genome-based Science in Shaping the Future of the World's Citrus Industries" at the 7th Annual Genomics of Energy & Environment Meeting on March 21, 2012 in Walnut Creek, California.

Gmitter, Jr., Fred (University of Florida)

2012-03-21T23:59:59.000Z

200

Poultry Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. poultry industry and ways in which electric-powered processes and technologies can be used in poultry and egg production and processing. The poultry industry, which consists of poultry production for meat as well as egg production and processing, is one of the fastest growing segments of the U.S. food manufacturing industry. It is also an energy-intensive industry. In fact, a 2010 report by the USDA illustrates ...

2011-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Industrial Cogeneration Application  

E-Print Network (OSTI)

Cogeneration is the sequential use of a single fuel source to generate electrical and thermal energy. It is not a new technology but an old, proven one whose interest has been reawakened. American Standard has had concerns regarding electrical pricing to our facilities as well as reserve generating capacity margins of some electrical utilities. Because of these concerns, we have been reviewing the potential of cogeneration at some of our key facilities. Our plan is to begin with a Pilot Plant 500 KW steam turbine generator to be installed and operating in 1986. Key points to be discussed in the paper are: 1. Relationship with outside parties, i.e., state agencies and the utility, regarding the project. 2. Engineering of the System. 3. Economics of the Project.

Mozzo, M. A.

1986-06-01T23:59:59.000Z

202

Application - Industrial Partnerships Office  

Current Weather. Protocol Office. Where to stay. Tri-Valley ... Emphasis has been placed on analysis tools used by research seismologists in the detailed study of ...

203

Atmospheric fluidized bed combustion advanced system concepts applicable to small industrial and commercial markets. Topical report, Level 2  

Science Conference Proceedings (OSTI)

As part of an overall strategy to promote FBC coal combustion and to improve the marketability of the eastern coals, the US Department of Energy`s Morgantown Energy Research Center awarded a three level contract to Riley Stoker Corporation to develop advanced Multi Solids Fluidized Bed (MSFB) boiler designs. The first level of this contract targeted the small package boiler (10,000--50,000 lb/hr steam) and industrial size boiler (75,000--150,000 lb/hr steam) markets. Two representative sizes, 30,000 lb/hr and 110,000 lb/hr of steam, were selected for the two categories for a detailed technical and economic evaluation. Technically, both the designs showed promise, however, the advanced industrial design was favored on economic considerations. It was thus selected for further study in the second level of the contract. Results of this Level-2 effort, presented in this report, consisted of testing the design concept in Riley`s 4.4 MBtu/hr pilot MSFB facility located at Riley Research Center in Worcester, Mass. The design and economics of the proof of concept facility developed in Level-1 of the contract were then revised in accordance with the findings of the pilot test program. A host site for commercial demonstration in Level-3 of the contract was also secured. It was determined that co-firing coal in combination with paper de-inking sludge will broaden the applicability of the design beyond conventional markets. International Paper (IP), the largest paper company in the world, is willing to participate in this part of the program. IP has offered its Hammermill operation at Lockhaven, Pa, site of a future paper de-inking plant, for the proof of concept installation. This plant will go in operation in 1994. It is recommended that METC proceed to the commercial demonstration of the design developed. The approach necessary to satisfy the needs of the customer while meeting the objectives of this program is presented along with a recommended plan of action.

Ake, T.R.; Dixit, V.B.; Mongeon, R.K.

1992-09-01T23:59:59.000Z

204

Description of Proposed Action  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carlsbad Field Office Carlsbad Field Office RECORD OF CATEGORICAL EXCLUSION DETERMINATION 1 Description of Proposed Action Performance of a three-dimensional seismic survey line on approximately 2,409 acres contained within the WIPP Land Withdrawal Area as part of a larger survey to determine whether hydrocarbons are present in the region in quantities that warrant extraction and development. Number and Title of Applicable Categorical Exclusion B3.1 Site Characterization/Environmental Monitoring Activities covered by this Categorical Exclusion include, but are not limited to, site characterization and environmental monitoring under CERCLA and RCRA. Specific activities include, but are not limited to: (a) Geological, geophysical (such as gravity, magnetic, electrical, seismic, and radar), geochemical, and

205

Industrial Compressed Air System Energy Efficiency Guidebook.  

DOE Green Energy (OSTI)

Energy efficient design, operation and maintenance of compressed air systems in industrial plants can provide substantial reductions in electric power and other operational costs. This guidebook will help identify cost effective, energy efficiency opportunities in compressed air system design, re-design, operation and maintenance. The guidebook provides: (1) a broad overview of industrial compressed air systems, (2) methods for estimating compressed air consumption and projected air savings, (3) a description of applicable, generic energy conservation measures, and, (4) a review of some compressed air system demonstration projects that have taken place over the last two years. The primary audience for this guidebook includes plant maintenance supervisors, plant engineers, plant managers and others interested in energy management of industrial compressed air systems.

United States. Bonneville Power Administration.

1993-12-01T23:59:59.000Z

206

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry banner Industry banner Neutron scattering research has applications in practically every field, and neutron research at ORNL is leading to productive partnerships with the industrial and business communities. We welcome proposals for all types of research, including those involving proprietary work. Recent studies have led to discoveries with potential applications in fields such as medicine, energy, and various metals technologies. For more information, please see our recent research highlights. Research Collaborations Industry-Driven Research Benefits Plastics Manufacturing Corning uses VULCAN to test limits of ceramic material for car emission controls, filtration devices Neutrons Probe Inner Workings of Batteries Industry and Neutron Science: Working To Make a Match

207

(Chapter to appear in Handbook of Industrial Robotics, 2nd Edition, edited by Shimon Nof, ROBOTICS APPLICATIONS  

E-Print Network (OSTI)

The railroad industry has recognized the economic benefits of automation, which has lead to the development industry is the RMS-2 rail grinding system (Anonymous, 1986). Developed by Speno Rail Services Co) program. The basic TOMCAT concept was first demonstrated by Philadelphia Electric in 1979 (Dunlap, 1986

Parker, Lynne E.

208

An application of fuzzy Delphi and fuzzy AHP for multi-criteria evaluation on bicycle industry supply chains  

Science Conference Proceedings (OSTI)

Under global saving energy and carbon wave and increasing incomes, the bicycle not only is a traditional transportation but also has become a tour and sport tool. Concerning the bicycle industry, the prior researches worked on analyzing bicycle tire ... Keywords: analytic hierarchy process (AHP), bicycle industry, fuzzy Delphi method (FDM), fuzzy analytic hierarchy process (FAHP), supply chain

Jao-Hong Cheng; Chih-Huei Tang

2009-01-01T23:59:59.000Z

209

,"South Dakota Natural Gas Industrial Consumption (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

,"Workbook Contents" ,"South Dakota Natural Gas Industrial Consumption (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of...

210

Towards Service Description Logics  

Science Conference Proceedings (OSTI)

Semantic service description and matchmaking are needed in embedded and disappearing computing, cooperative multiagent systems, and the semantic web. Standard program semantics formalizations are not suited to modeling service semantics, because they ... Keywords: description logics, semantic web

Piero A. Bonatti

2002-09-01T23:59:59.000Z

211

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

J.F. Beesley

2005-04-21T23:59:59.000Z

212

Detection of Warming Effects Due to Industrialization: An Accumulated Intervention Model with an Application in Pohang, Korea  

Science Conference Proceedings (OSTI)

Modifications of surface air temperature caused by anthropogenic impacts have received much attention recently because of the heightened interest in climatic change. When an industrial area is constructed, resulting in a large-scale anthropogenic ...

S. B. Ryoo; S. E. Moon

1995-06-01T23:59:59.000Z

213

Multimedia Semantic Features and Image Content Description  

Science Conference Proceedings (OSTI)

Content-based indexing and retrieval of images and video requires a proper semantic description for image content. This paper discusses the mapping of high-level, application-specific, features to the visual primitives that are accessible through image ...

M. Cavazza; R. J. Green; I. J. Palmer

1998-10-01T23:59:59.000Z

214

Multiple-description multistage vector quantization  

Science Conference Proceedings (OSTI)

Multistage vector quantization (MSVQ) is a technique for low complexity implementation of high-dimensional quantizers, which has found applications within speech, audio, and image coding. In this paper, a multiple-description MSVQ (MD-MSVQ) targeted ...

Pradeepa Yahampath

2007-07-01T23:59:59.000Z

215

Dairy Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. dairy industry and ways in which electric-powered processes and technologies can be used in milk production and processing. Because of the different processes involved, the characteristics of energy consumption at milk production and processing facilities vary by facility. Most energy used in milk production is in the form of diesel fuel, followed by electricity and then by petroleum products such as gasoline an...

2011-03-30T23:59:59.000Z

216

Partial Oxidation Gas Turbine for Power and Hydrogen Co-Production from Coal-Derived Fuel in Industrial Applications  

SciTech Connect

The report presents a feasibility study of a new type of gas turbine. A partial oxidation gas turbine (POGT) shows potential for really high efficiency power generation and ultra low emissions. There are two main features that distinguish a POGT from a conventional gas turbine. These are associated with the design arrangement and the thermodynamic processes used in operation. A primary design difference of the POGT is utilization of a non?catalytic partial oxidation reactor (POR) in place of a conventional combustor. Another important distinction is that a much smaller compressor is required, one that typically supplies less than half of the air flow required in a conventional gas turbine. From an operational and thermodynamic point of view a key distinguishing feature is that the working fluid, fuel gas provided by the OR, has a much higher specific heat than lean combustion products and more energy per unit mass of fluid can be extracted by the POGT expander than in the conventional systems. The POGT exhaust stream contains unreacted fuel that can be combusted in different bottoming ycle or used as syngas for hydrogen or other chemicals production. POGT studies include feasibility design for conversion a conventional turbine to POGT duty, and system analyses of POGT based units for production of power solely, and combined production of power and yngas/hydrogen for different applications. Retrofit design study was completed for three engines, SGT 800, SGT 400, and SGT 100, and includes: replacing the combustor with the POR, compressor downsizing for about 50% design flow rate, generator replacement with 60 90% ower output increase, and overall unit integration, and extensive testing. POGT performances for four turbines with power output up to 350 MW in POGT mode were calculated. With a POGT as the topping cycle for power generation systems, the power output from the POGT ould be increased up to 90% compared to conventional engine keeping hot section temperatures, pressures, and volumetric flows practically identical. In POGT mode, the turbine specific power (turbine net power per lb mass flow from expander exhaust) is twice the value of the onventional turbine. POGT based IGCC plant conceptual design was developed and major components have been identified. Fuel flexible fluid bed gasifier, and novel POGT unit are the key components of the 100 MW IGCC plant for co producing electricity, hydrogen and/or yngas. Plant performances were calculated for bituminous coal and oxygen blown versions. Various POGT based, natural gas fueled systems for production of electricity only, coproduction of electricity and hydrogen, and co production of electricity and syngas for gas to liquid and hemical processes were developed and evaluated. Performance calculations for several versions of these systems were conducted. 64.6 % LHV efficiency for fuel to electricity in combined cycle was achieved. Such a high efficiency arise from using of syngas from POGT exhaust s a fuel that can provide required temperature level for superheated steam generation in HRSG, as well as combustion air preheating. Studies of POGT materials and combustion instabilities in POR were conducted and results reported. Preliminary market assessment was performed, and recommendations for POGT systems applications in oil industry were defined. POGT technology is ready to proceed to the engineering prototype stage, which is recommended.

Joseph Rabovitser

2009-06-30T23:59:59.000Z

217

Description of the Canadian Particulate-Fill WastePackage (WP) System for Spent-Nuclear Fuel (SNF) and its Applicability to Ligh-Water Reactor SNF WPS with Depleted Uranium-Dioxide Fill  

NLE Websites -- All DOE Office Websites (Extended Search)

3502 3502 Chemical Technology Division DESCRIPTION OF THE CANADIAN PARTICULATE-FILL WASTE-PACKAGE (WP) SYSTEM FOR SPENT-NUCLEAR FUEL(SNF) AND ITS APPLICABILITY TO LIGHT- WATER REACTOR SNF WPS WITH DEPLETED URANIUM-DIOXIDE FILL Charles W. Forsberg Oak Ridge National Laboratory * P.O. Box 2008 Oak Ridge, Tennessee 37831-6180 Tel: (423) 574-6783 Fax: (423) 574-9512 Email: forsbergcw@ornl.gov October 20, 1997 _________________________ Managed by Lockheed Martin Energy Research Corp. under contract DE-AC05-96OR22464 for the * U.S. Department of Energy. iii CONTENTS LIST OF FIGURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v LIST OF TABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii ACRONYMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

218

Applications of thermal energy storage to process heat storage and recovery in the paper and pulp industry. Final report, September 1977--May 1978  

DOE Green Energy (OSTI)

Applications of Thermal Energy Storage (TES) in a paper and pulp mill power house were studied as one approach to the transfer of steam production from fossil fuel boilers to waste fuel (hog fuel) boilers. Data from specific mills were analyzed, and various TES concepts evaluated for application in the process steam supply system. Constant pressure and variable pressure steam accumulators were found to be the most attractive storage concepts for this application. Performance analyses based on the operation of a math model of the process steam supply system indicate potential substitution of waste wood fuel for 100,000 bbl oil per year per installation with the accumulator TES system. Based on an industry survey of potential TES application, which requires excess base steaming capability, the results from the individual installation were extrapolated to a near-term (1980's) fossil fuel savings in the paper and pulp industry of 3.2 x 10/sup 6/ bbl oil/year. Conceptual designs of mechanical equipment and control systems indicate installed cost estimates of about $560,000 per installation, indicating an after tax return on investment of over 30%.

Carr, J.H.; Hurley, P.J.; Martin, P.J.

1978-09-01T23:59:59.000Z

219

Applications of thermal energy storage to process heat storage and recovery in the paper and pulp industry. Final report, September 1977--May 1978  

SciTech Connect

Applications of Thermal Energy Storage (TES) in a paper and pulp mill power house were studied as one approach to the transfer of steam production from fossil fuel boilers to waste fuel (hog fuel) boilers. Data from specific mills were analyzed, and various TES concepts evaluated for application in the process steam supply system. Constant pressure and variable pressure steam accumulators were found to be the most attractive storage concepts for this application. Performance analyses based on the operation of a math model of the process steam supply system indicate potential substitution of waste wood fuel for 100,000 bbl oil per year per installation with the accumulator TES system. Based on an industry survey of potential TES application, which requires excess base steaming capability, the results from the individual installation were extrapolated to a near-term (1980's) fossil fuel savings in the paper and pulp industry of 3.2 x 10/sup 6/ bbl oil/year. Conceptual designs of mechanical equipment and control systems indicate installed cost estimates of about $560,000 per installation, indicating an after tax return on investment of over 30%.

Carr, J.H.; Hurley, P.J.; Martin, P.J.

1978-09-01T23:59:59.000Z

220

Application of solar energy to the supply of industrial process hot water. Aerotherm final report, 77-235. [Can washing in Campbell Soup plant  

DOE Green Energy (OSTI)

The objectives of the Solar Industrial Process Hot Water Program are to design, test, and evaluate the application of solar energy to the generation and supply of industrial process hot water, and to provide an assessment of the economic and resource benefits to be gained. Other objectives are to stimulate and give impetus to the use of solar energy for supplying significant amounts of industrial process heat requirements. The plant selected for the design of a solar industrial process hot water system was the Campbell Soup facility in Sacramento, California. The total hot water demand for this plant varies between 500 and 800 gpm during regular production shifts, and hits a peak of over 1,000 gpm for approximately one hour during the cleanup shift. Most of the hot water is heated in the boiler room by a combination of waste heat recovery and low pressure (5 psi) steam-water heat exchangers. The hot water emerges from the boiler room at a temperature between 160/sup 0/F and 180/sup 0/F and is transported to the various process areas. Booster heaters in the process areas then use low pressure (5 psi) or medium pressure (20 psi) steam to raise the temperature of the water to the level required for each process. Hot water is used in several processes at the Campbell Soup plant, but the can washing process was selected to demonstrate the feasibility of a solar hot water system. A detailed design and economic analysis of the system is given. (WHK)

None

1977-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Equational descriptions of languages ?  

E-Print Network (OSTI)

This paper is a survey on the equational descriptions of languages. The first part is devoted to Birkhoffs and Reitermans theorems on equational descriptions of varieties. Eilenbergs variety theorem and its successive generalizations form the second part. The more recent results on equational descriptions of lattices of languages are presented in the third part of the paper. Equations have been used for a long time in mathematics to provide a concise description of various mathematical objects. This article roughly follows a historical approach to present such equational descriptions for formal languages, ranging over a period of 45 years: from Schtzenbergers characterization of star-free languages [36] to the following recent result of [18]: Every lattice of languages admits an equational description. This evolution was made possible by a gradual abstraction of the notion of equation. The story really starts in 1935 with Birkhoffs theorem on equational

Jean-ric Pin

2012-01-01T23:59:59.000Z

222

Plan Descriptions & Summaries  

NLE Websites -- All DOE Office Websites (Extended Search)

Plan Descriptions & Summaries Retiree Insurance Plans Retiree health and welfare benefits are managed by AonHewitt and Associates. Contact Retiree Insurance Providers Plan...

223

DESCRIPTION OF ACTIVITIES AND SELECTED RESULTS FOR THE U.S. DEPARTMENT OF ENERGY S CLEAN ENERGY APPLICATION CENTERS: FISCAL YEAR 2010  

SciTech Connect

The U.S. Department of Energy (DOE) sponsors a set of Clean Energy Application Centers that promote the development and deployment of clean energy technologies. There are eight regional centers that provide assistance for specific areas of the country plus a separate center operated by the International District Energy Association that provides technical assistance on district energy issues and applications to the regional centers. The original focus of the centers was on combined heat and power (CHP) alone but, beginning in fiscal year 2010, their scope expanded to include district energy systems and waste heat recovery. At that time, the official name of the centers changed from CHP Regional Application Centers (RACs) to Clean Energy Application Centers, and their number was expanded to include the previously-mentioned center focusing on district energy. Oak Ridge National Laboratory (ORNL) has performed two previous studies of RAC activities. The first one examined what the RACs had done each year from the initiation of the program through fiscal year (FY) 2008 and the second one examined RAC activities for the 2009 fiscal year. The most recent study, described in this report, examines what was accomplished in fiscal year 2010, the first year since the RACs expanded their focus and changed their name to Clean Energy Application Centers.

Schweitzer, Martin [ORNL

2011-11-01T23:59:59.000Z

224

USB's Industrial Uses of Soybean Oil Award  

Science Conference Proceedings (OSTI)

Recognizing outstanding research into new industrial applications or uses for soybean oil, sponsored by the United Soybean Board. USB's Industrial Uses of Soybean Oil Award Awards Soybeans USB's

225

A NEW LED-LED PORTABLE CO2 GAS SENSOR BASED ON AN INTERCHANGEABLE MEMBRANE SYSTEM FOR INDUSTRIAL APPLICATIONS  

E-Print Network (OSTI)

A NEW LED-LED PORTABLE CO2 GAS SENSOR BASED ON AN INTERCHANGEABLE MEMBRANE SYSTEM FOR INDUSTRIAL, consisting of two LEDs wherein one is used as the light source (emitter) and the other is used in reverse bias mode as the light detector. The first configuration uses a green LED as emitter and a red LED

Lee, Hyowon

226

DOE Solar Decathlon: 2007 Building Industry Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

team Puerto Rico student stands over the team's gray-water pool, which is filled with green plants, and explains to visitors surrounding the pool how it recycles water for reuse. team Puerto Rico student stands over the team's gray-water pool, which is filled with green plants, and explains to visitors surrounding the pool how it recycles water for reuse. Universidad de Puerto Rico student Wilfredo Rodriguez explains the team's gray-water pool to visitors at the 2007 Solar Decathlon. The pool is used to filter wash water for reuse. Solar Decathlon 2007 Building Industry Workshops Below are descriptions of the workshops offered at the 2007 Solar Decathlon on Building Industry Day, Thursday, October 18, 2007. Solar Applications for Homes Revised Title: Translating Sustainability to Affordable Housing 9:00 a.m. Presenter: ASHRAE and John Quale, Assistant Professor, University of Virginia School of Architecture The focus of the workshop is translating sustainability to affordable

227

Optimization of Industrial Enzymes  

Enzymes are highly efficient naturally occurring catalysts that are used in a wide range of applications from industrial processes to new drug development. Conventional mechanism for understanding the mechanisms of enzyme functions are costly and time ...

228

Summary of collaborative photovoltaic industry work to proactively improve codes and standards for photovoltaic power system applications  

SciTech Connect

Several important milestones in codes and standards pertaining to the design, installation and operation of photovoltaic (PV) systems have recently been completed with collaboration of participants from all sectors of the PV industry, utilities and the US Department of Energy`s National Photovoltaic Program. Codes and standards that have been proposed, written or modified include changes and additions for the 1999 National Electrical Code{reg_sign} (NEC{reg_sign}), standards for fire and personnel safety, system testing, component qualification, and utility interconnect. Project authorization requests with the Institute of Electrical and Electronic Engineers (IEEE) have resulted in standards for listing PV modules and balance-of-system components. Industry collaboration with Underwriter Laboratories, Inc. (UL), with the American Society for Testing and Materials (ASTM), and through critical input and review for international standards with the International Electrotechnical Commission (IEC) have resulted in domestic and international standards for PV. Work related to the codes and standards activities through the International Energy Agency (IEA) is also being supported by the PV industry and the US DOE. This paper will concentrate on and summarize the important new NEC proposals for PV systems and will also describe and show the bonds between the activities in other standards writing activities. The paper will also provide an analysis of changes and resulting impacts of selected proposed NEC changes on PV designs, installations and performance.

Bower, W.I.

1997-08-01T23:59:59.000Z

229

?-connections of Description Logics  

E-Print Network (OSTI)

this paper is to summarize the general transfer results for E- connections that have recently been obtained in [7]. The generality of the results is due to the fact that are defined and investigated using the framework of so-called abstract description systems (ADSs), a common generalization of description logics, modal logics, logics of time and space, and many other logical formalisms [2]. Thus, we can connect not only DLs with DLs, but also, say, description logics with spatial logics [8]. A natural interpretation of link relations in this context would then be, for instance, to describe the spatial extension of abstract (DL) objects

Oliver Kutz; Carsten Lutz; Frank Wolter; Michael Zakharyaschev

2003-01-01T23:59:59.000Z

230

Putting the sun to work in industry  

DOE Green Energy (OSTI)

Industrial applications of solar energy are discussed in this illustrated brochure along with the DOE and SERI industrial process heat field test programs. The future prospects and advantages of solar industrial process heat are also discussed. (MHR)

None

1979-09-01T23:59:59.000Z

231

Development of a New Class of Fe-3Cr-W(V) Ferritic Steels for Industrial Process Applications  

SciTech Connect

The project described in this report dealt with improving the materials performance and fabrication for hydrotreating reactor vessels, heat recovery systems, and other components for the petroleum and chemical industries. These reactor vessels can approach ship weights of about 300 tons with vessel wall thicknesses of 3 to 8 inches. They are typically fabricated from Fe-Cr-Mo alloy steels, containing 1.25 to 12% chromium and 1 to 2% molybdenum. The goal of this project was to develop Fe-Cr-W(V) steels that can perform similar duties, in terms of strength at high temperatures, but will weigh less and thereby save energy.

Jawad, Mann; Sikka, Vinod K.

2005-04-06T23:59:59.000Z

232

Processor Description Languages  

Science Conference Proceedings (OSTI)

Efficient design of embedded processors plays a critical role in embedded systems design. Processor description languages and their associated specification, exploration and rapid prototyping methodologies are used to find the best possible design for ... Keywords: Computer Architecture, Computer Science

Prabhat Mishra; Nikil Dutt

2008-05-01T23:59:59.000Z

233

B Plant facility description  

SciTech Connect

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

234

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and posted 2/10/2011 and posted 2/10/2011 *Title, Location Estimated Cost Description Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain $50,000 FONSI: uncertain Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $70,000 Attachment: Memo, Moody to Marcinowski, III, SUBJECT: NEPA 2011 APS for DOE-SRS, Dated: Annual NEPA Planning Summary Environmental Assessments (EAs) Expected to be Initiated in the Next 12 Months Department of Energy (DOE) Savannah River Site (SRS) Jan-11 Estimated Schedule (**NEPA Milestones) South Carolina Department of Health and Environmental Control (SCDHEC) issued a National Pollutant Discharge Elimination System (NPDES) Industrial Stormwater General Permit (IGP) # SCR000000 November 12, with an effective date of January

235

Project_Descriptions_ITP_ARRA_Awards.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Selections for Industrial Technologies Program Recovery Act Funding Selections for Industrial Technologies Program Recovery Act Funding Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment Award Winners City and State Project Description Total DOE Funding Air Products and Chemicals, Inc. Middletown, OH Waste Energy Project at the AK Steel Corporation Middletown Works. The project will construct a combined cycle power generation plant at the Middletown, OH, works of AK Steel that will capture and process the blast furnace gas (BFG). The BFG, generated in ironmaking operations, is either flared or used to make steam needed for industrial processes . Currently, over 50% of the BFG is flared. This project will utilize

236

Use of solar energy to produce process heat for industry  

DOE Green Energy (OSTI)

The role of solar energy in supplying heat and hot water to residential and commercial buildings is familiar. On the other hand, the role that solar energy may play in displacing imported energy supplies in the industrial and utility sectors often goes unrecognized. The versatility of solar technology lends itself well to applications in industry; particularly to the supplemental supply of process heat of all kinds. The realization of that potential will depend, however, on the identification of the most suitable applications and locations for industrial solar energy and the continued improvement in cost, durability, and reliability of solar equipment. The status of solar thermal technology for industrial process heat applications is surveyed, including a description of current costs and operating histories. Because the current status is unsatisfactory in view of the goals established by President Carter for solar industrial energy, the most important objectives to be met in improving system performance, reducing cost, and identifying markets for solar IPH are outlined. The effect of government tax policy will be of little impact until technical efficiency and cost effectiveness are significantly improved.

Brown, K.

1980-04-01T23:59:59.000Z

237

LIFTING THE DUSTY VEIL WITH NEAR- AND MID-INFRARED PHOTOMETRY. I. DESCRIPTION AND APPLICATIONS OF THE RAYLEIGH-JEANS COLOR EXCESS METHOD  

Science Conference Proceedings (OSTI)

The Milky Way (MW) remains a primary laboratory for understanding the structure and evolution of spiral galaxies, but typically we are denied clear views of MW stellar populations at low Galactic latitudes because of extinction by interstellar dust. However, the combination of Two Micron All-Sky Survey (2MASS) near-infrared (NIR) and Spitzer-IRAC mid-infrared (MIR) photometry enables a powerful method for determining the line-of-sight reddening to any star: the sampled wavelengths lie in the Rayleigh-Jeans part of the spectral energy distribution of most stars, where, to first order, all stars have essentially the same intrinsic color. Thus, changes in stellar NIR-MIR colors due to interstellar reddening are readily apparent, and (under an assumed extinction law) the observed colors and magnitudes of stars can be easily and accurately restored to their intrinsic values, greatly increasing their usefulness for Galactic structure studies. In this paper, we explore this 'Rayleigh-Jeans Color Excess' (RJCE) method and demonstrate that use of even a simple variant of the RJCE method based on a single reference color, (H -[4.5{mu}]), can rather accurately remove dust effects from previously uninterpretable 2MASS color-magnitude diagrams of stars in fields along the heavily reddened Galactic midplane, with results far superior to those derived from application of other dereddening methods. We also show that 'total' Galactic midplane extinction looks rather different from that predicted using 100{mu} emission maps from the IRAS/ISSA and COBE/DIRBE instruments as presented by Schlegel et al. Instead, the Galactic midplane extinction strongly resembles the distribution of {sup 13}CO (J = 1{yields}0) emission. Future papers will focus on refining the RJCE method and applying the technique to understand better not only dust and its distribution but also the distribution of stars intermixed with the dust in the low-latitude Galaxy.

Majewski, Steven R.; Zasowski, Gail; Nidever, David L., E-mail: srm4n@virginia.edu, E-mail: gz2n@virginia.edu, E-mail: dln5q@virginia.edu [Department of Astronomy, University of Virginia, Charlottesville, VA 22904 (United States)

2011-09-20T23:59:59.000Z

238

PNNL: Available Technologies: Energy & Utilities Industry  

Industry: Energy & Utilities. Click on the portfolios below to view the technologies that may have potential applications in the Energy & ...

239

PNNL: Available Technologies: Communications & Media Industry  

Industry: Communications & Media. Click on the portfolios below to view the technologies that may have potential applications in the ...

240

SNF AGING SYSTEM DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

L.L. Swanson

2005-04-06T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

M. Maniyar

2004-06-22T23:59:59.000Z

242

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

243

University Location Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Location Project Description Location Project Description Boise State University Boise, Idaho Boise State University has undertaken a study of the structural setting and geothermal potential at Neal Hot Springs that will integrate geology, geochemistry, and geophysics to analyze the site on the western Snake River plain. Boise State will determine if Neal Hot Springs sustains the necessary rock dilation and conduit pathways for hydrothermal fluid flow and successful geothermal development. The result will be new data acquisition, including a deep geophysical survey and fault surface data. Colorado School of Mines Golden, Colorado Colorado School of Mines will conduct an investigation near Homedale, Idaho, an area that straddles volcanic rock and unconsolidated sediments.

244

Detailed Course Module Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Course Module Description Course Module Description Module/Learning Objectives Level of Detail in Module by Audience Consumers Gen Ed/ Community College Trades 1. Energy Issues and Building Solutions High High High Learning Objectives: * Define terms of building science, ecological systems, economics of consumption * Relate building science perspective, ecology, social science * Explain historical energy and environmental issues related to buildings * Compare Site and source energy * Examine the health, safety and comfort issues in buildings * Examine the general context for building solutions (zero energy green home with durability as the goal) * Explain a basic overview of alternative energy (total solar flux) - do we have enough energy * Examine cash flow to homeowners

245

Property:Distributed Generation/Site Description | Open Energy Information  

Open Energy Info (EERE)

Generation/Site Description Generation/Site Description Jump to: navigation, search This is a property of type String. The allowed values for this property are: Agricultural Commercial-Hotel Commercial-Ice Arena Commercial-High Rise Office Commercial-Low Rise Office Commercial-Refrigerated Warehouse Commercial-Restaurant Commercial-Retail Store Commercial-Supermarket Commercial-Theater Commercial-Other Institutional-Hospital/Health Care Institutional-Nursing Home Institutional-School/University Institutional-Other Residential-Multifamily-Single Building Residential-Multifamily-Multibuilding Residential-Single Family Industrial-Food Processing Industrial-Plastics Processing Industrial-Wood Products Industrial-Other Testing Laboratory Water Utility Other Utility Other Pages using the property "Distributed Generation/Site Description"

246

Industrial Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Industrial Industrial / Manufacturing Buildings Industrial/manufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey (MECS). See the MECS home page for further information. Commercial buildings found on a manufacturing industrial complex, such as an office building for a manufacturer, are not considered to be commercial if they have the same owner and operator as the industrial complex. However, they would be counted in the CBECS if they were owned and operated independently of the manufacturing industrial complex. Specific questions may be directed to: Joelle Michaels joelle.michaels@eia.doe.gov CBECS Manager Release date: January 21, 2003 Page last modified: May 5, 2009 10:18 AM http://www.eia.gov/consumption/commercial/data/archive/cbecs/pba99/industrial.html

247

Industries Affected  

Science Conference Proceedings (OSTI)

Table 2   Industries affected by microbiologically influenced corrosion...generation: nuclear, hydro, fossil fuel,

248

Ceramic Industries, Non-ferrous  

E-Print Network (OSTI)

Refractory applications for the steel, non-ferrous and cement industry Refractory applications for the ceramic, petrochemical and other industry Raw materials for refractories Users points of view Quality and Environment Processes, equipment and controls Development of refractory products

Refractories For Iron; Hydrocarbon Waste Incineration Pulp

2005-01-01T23:59:59.000Z

249

,"Utah Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Utah Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","52013"...

250

,"Ohio Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Ohio Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013"...

251

,"Texas Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Workbook Contents" ,"Texas Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of...

252

,"Michigan Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Michigan Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013"...

253

,"U.S. Natural Gas Average Annual Consumption per Industrial...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Natural Gas Average Annual Consumption per Industrial Consumer (Mcf)",1,"Annual",2011...

254

,"Oregon Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Oregon Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

255

,"Montana Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

ame","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Montana Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

256

,"Kansas Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Kansas Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

257

,"Indiana Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

ame","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Indiana Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

258

,"Maine Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Maine Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

259

,"Arizona Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

ame","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Arizona Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

260

,"Wyoming Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

ame","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Wyoming Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013" ,"Release...

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

,"Vermont Natural Gas Industrial Price (Dollars per Thousand...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Vermont Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","72013"...

262

,"Texas Natural Gas Industrial Price (Dollars per Thousand Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Texas Natural Gas Industrial Price (Dollars per Thousand Cubic Feet)",1,"Monthly","52013"...

263

Applications  

Science Conference Proceedings (OSTI)

...size during thermomechanical processing is row standard industrial practice. Figure 21 shows the shape of the boundary

264

Assessment of TEES{reg_sign} applications for Wet Industrial Wastes: Energy benefit and economic analysis report  

DOE Green Energy (OSTI)

Fundamental work is catalyzed biomass pyrolysis/gasification led to the Thermochemical Environmental Energy System (TEES{reg_sign}) concept, a means of converting moist biomass feedstocks to high-value fuel gases such as methane. A low-temperature (350{degrees}C), pressurized (3100 psig) reaction environment and a nickel catalyst are used to reduce volumes of very high-moisture wastes such as food processing byproducts while producing useful quantities of energy. A study was conducted to assess the economic viability of a range of potential applications of the process. Cases examined included feedstocks of cheese whey, grape pomace, spent grain, and an organic chemical waste stream. The analysis indicated that only the organic chemical waste process is economically attractive in the existing energy/economic environment. However, food processing cases will become attractive as alternative disposal practices are curtailed and energy prices rise.

Elliott, D.C.; Scheer, T.H.

1992-02-01T23:59:59.000Z

265

Energy Efficiency Improvement and Cost Saving Oportunities for the Concrete Industry  

SciTech Connect

The U.S. concrete industry is the main consumer of U.S.-produced cement. The manufacturing of ready mixed concrete accounts for more than 75% of the U.S. concrete production following the manufacturing of precast concrete and masonry units. The most significant expenditure is the cost of materials accounting for more than 50% of total concrete production costs - cement only accounts for nearly 24%. In 2009, energy costs of the U.S. concrete industry were over $610 million. Hence, energy efficiency improvements along with efficient use of materials without negatively affecting product quality and yield, especially in times of increased fuel and material costs, can significantly reduce production costs and increase competitiveness. The Energy Guide starts with an overview of the U.S. concrete industrys structure and energy use, a description of the various manufacturing processes, and identification of the major energy consuming areas in the different industry segments. This is followed by a description of general and process related energy- and cost-efficiency measures applicable to the concrete industry. Specific energy and cost savings and a typical payback period are included based on literature and case studies, when available. The Energy Guide intends to provide information on cost reduction opportunities to energy and plant managers in the U.S. concrete industry. Every cost saving opportunity should be assessed carefully prior to implementation in individual plants, as the economics and the potential energy and material savings may differ.

Kermeli, Katerina; Worrell, Ernst; Masanet, Eric

2011-12-01T23:59:59.000Z

266

Format for Generic Task Description  

Science Conference Proceedings (OSTI)

Task: Submitting Proposals. Containing Scenario: Fast Tracking a Battery Standard Description: Review of the proposed ...

267

Proposal Review Panel Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Review Panel Descriptions Proposal Review Panel Descriptions To ensure competent scientific review, a proposal may be assigned to a different panel (at the discretion of the Review Panel Chair), or the panel may seek additional ad hoc reviews from other experts. High-Pressure This panel reviews scattering and diffraction proposals that focus on materials at high pressure. Techniques such as (but not limited to) diffraction, nuclear resonant scattering, and inelastic x-ray scattering for materials at high pressure are appropriate for this panel to consider. Instrumentation This panel reviews proposals related to the development of beamline instrumentation, sample environments, x-ray optical components, and/or detectors that are relevant to synchrotron radiation research. This panel

268

NAICS Codes Description:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Codes Codes Description: Filters: Date Signed only show values between '10/01/2006' and '09/30/2007', Contracting Agency ID show only ('8900'), Contracting Office ID show only ('00001') Contracting Agency ID: 8900, Contracting Office ID: 00001 NAICS Code NAICS Description Actions Action Obligation 541519 OTHER COMPUTER RELATED SERVICES 251 $164,546,671 541611 ADMINISTRATIVE MANAGEMENT AND GENERAL MANAGEMENT CONSULTING SERVICES 236 $52,396,806 514210 DATA PROCESSING SERVICES 195 $28,941,727 531210 OFFICES OF REAL ESTATE AGENTS AND BROKERS 190 $6,460,652 541330 ENGINEERING SERVICES 165 $33,006,079 163 $11,515,387 541690 OTHER SCIENTIFIC AND TECHNICAL CONSULTING SERVICES 92 $40,527,088 531390 OTHER ACTIVITIES RELATED TO REAL ESTATE 79 -$659,654 337214 OFFICE FURNITURE (EXCEPT WOOD) MANUFACTURING 78 $1,651,732

269

Descriptions of Past Research  

Science Conference Proceedings (OSTI)

This product is a compilation of over one-hundred product summaries describing EPRI research performed over the previous twenty years. The summaries are arranged according to categories of generators, steam turbines, software, Technology Innovation (formerly Strategic Science and Technology) reports, and miscellaneous. Each product summary contains an abstract, a description of objective, approach, and results, and an EPRI perspective. This document is a useful reference resource for EPRI member organiza...

2006-05-19T23:59:59.000Z

270

Industry @ ALS  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry @ ALS Industry @ ALS Industry @ ALS Concrete Industry Benefits from Ancient Romans and the ALS Print Thursday, 17 October 2013 14:24 New insights into the Romans' ingenious concrete harbor structures emerging from ALS beamline research could move the modern concrete industry toward its goal of a reduced carbon footprint. Summary Slide Read more... Moving Industry Forward: Finding the Environmental Opportunity in Biochar Print Thursday, 12 September 2013 08:41 Using ALS Beamlines 10.3.2 and 8.3.2, the Environmental Protection Agency (EPA) is currently investigating how biochar sorbs environmental toxins and which kinds of biochar are the most effective. The possibilities for widespread use have already launched entrepreneurial commercial ventures. Summary Slide

271

Coal supply/demand, 1980 to 2000. Task 3. Resource applications industrialization system data base. Final review draft. [USA; forecasting 1980 to 2000; sector and regional analysis  

SciTech Connect

This report is a compilation of data and forecasts resulting from an analysis of the coal market and the factors influencing supply and demand. The analyses performed for the forecasts were made on an end-use-sector basis. The sectors analyzed are electric utility, industry demand for steam coal, industry demand for metallurgical coal, residential/commercial, coal demand for synfuel production, and exports. The purpose is to provide coal production and consumption forecasts that can be used to perform detailed, railroad company-specific coal transportation analyses. To make the data applicable for the subsequent transportation analyses, the forecasts have been made for each end-use sector on a regional basis. The supply regions are: Appalachia, East Interior, West Interior and Gulf, Northern Great Plains, and Mountain. The demand regions are the same as the nine Census Bureau regions. Coal production and consumption in the United States are projected to increase dramatically in the next 20 years due to increasing requirements for energy and the unavailability of other sources of energy to supply a substantial portion of this increase. Coal comprises 85 percent of the US recoverable fossil energy reserves and could be mined to supply the increasing energy demands of the US. The NTPSC study found that the additional traffic demands by 1985 may be met by the railways by the way of improved signalization, shorter block sections, centralized traffic control, and other modernization methods without providing for heavy line capacity works. But by 2000 the incremental traffic on some of the major corridors was projected to increase very significantly and is likely to call for special line capacity works involving heavy investment.

Fournier, W.M.; Hasson, V.

1980-10-10T23:59:59.000Z

272

Industrial Distributed Energy: Combined Heat & Power  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(DOE) (DOE) Industrial Technology Program (ITP) Industrial Distributed Energy: Combined Heat & Power (CHP) Richard Sweetser Senior Advisor DOE's Mid-Atlantic Clean Energy Application Center 32% Helping plants save energy today using efficient energy management practices and efficient new technologies Activities to spur widespread commercial use of CHP and other distributed generation solutions 10% Manufacturing Energy Systems 33% Industries of the Future R&D addressing top priorities in America's most energy-intensive industries and cross-cutting activities applicable to multiple industrial subsectors 25% Industrial Distributed Energy Industrial Technical Assistance DOE ITP FY'11 Budget: $100M Knowledge development and

273

High Technology and Industrial Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Semiconductor clean room Semiconductor clean room High Technology and Industrial Systems EETD's research on high technology buildings and industrial systems is aimed at reducing energy consumed by the industrial sector in manufacturing facilities, including high technology industries such as data centers, cleanrooms in the such industries as electronics and pharmaceutical manufacturing, and laboratories, improving the competitiveness of U.S. industry. Contacts William Tschudi WFTschudi@lbl.gov (510) 495-2417 Aimee McKane ATMcKane@lbl.gov (518) 782-7002 Links High-Performance Buildings for High-Tech Industries Industrial Energy Analysis Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

274

MCO Monitoring activity description  

Science Conference Proceedings (OSTI)

Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description.

SEXTON, R.A.

1998-11-09T23:59:59.000Z

275

Applications  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends High Technology and Industrial Systems Lighting Systems Residential Buildings...

276

Application  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore ...

277

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Jun Wang Physicist, Industrial Program Coordinator Phone: 344-2661 Email: junwang@bnl.gov Jun Wang is an Industrial Program Coordinator in the Photon Science Directorate at Brookhaven National Laboratory. She is working closely with industrial researchers as well as beamline staff to identify and explore new opportunities in industrial applications using synchrotron radiation. She has been leading the industrial research program including consultation, collaboration and outreach to the industrial user groups. Before joining BNL in 2008, Jun Wang was a Lead Scientist for a high-resolution high throughput powder diffraction program at the Advanced Photon Source (APS). As a Physicist at BNL, her research focuses on materials structure determination and evolution. Her expertise covers wide range x-ray techniques such as thin film x-ray diffraction and reflectivity, powder diffraction, small angle x-ray scattering, protein solution scattering and protein crystallography, as well as x-ray imaging. Currently she is the project leader of a multi-million dollar project on transmission x-ray microscopy recently funded by the U.S. DOE and the spokesperson for this new imaging beamline at the NSLS. She has also been collaborating with universities and industries for several projects on energy research at the NSLS.

278

Applications of thermal energy storage to process heat and waste heat recovery in the primary aluminum industry. Final report, September 1977-September 1978  

DOE Green Energy (OSTI)

The results of a study entitled, Applications of Thermal Energy Storage to Process Heat and Waste Heat Recovery in the Primary Aluminum Industry are presented. In this preliminary study, a system has been identified by which the large amounts of low-grade waste energy in the primary pollution control system gas stream can be utilized for comfort heating in nearby communities. Energy is stored in the form of hot water, contained in conventional, insulated steel tanks, enabling a more efficient utilization of the constant energy source by the cyclical energy demand. Less expensive energy storage means (heated ponds, aquifers), when they become fully characterized, will allow even more cost-competitive systems. Extensive design tradeoff studies have been performed. These tradeoff studies indicate that a heating demand equivalent to 12,000 single-family residences can be supplied by the energy from the Intalco plant. Using a 30-year payback criterion (consistent with utility planning practice), the average cost of energy supplied over the system useful life is predicted at one-third the average cost of fossil fuel. The study clearly shows that the utilization of waste energy from aluminum plants is both technically and economically attractive. The program included a detailed survey of all aluminum plants within the United States, allowing the site specific analyses to be extrapolated to a national basis. Should waste heat recovery systems be implemented by 1985, a national yearly savings of 6.5 million barrels of oil can be realized.

Katter, L.B.; Hoskins, R.L.

1979-04-01T23:59:59.000Z

279

Number: 1394 Description: In what ...  

Science Conference Proceedings (OSTI)

... Number: 1752 Description: When was the Oklahoma City bombing? ... name of the plane that dropped the Atomic Bomb on Hiroshima? ...

2003-02-12T23:59:59.000Z

280

Opportunities for Energy Efficiency and Demand Response in the California Cement Industry  

E-Print Network (OSTI)

ApplicationsintheCementIndustry. MineralEngineeringCement Production,CementIndustryTechnicalConference,gearlessmilldrive,CementIndustryTechnicalConference,

Olsen, Daniel

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Number: 894 Description: How far is it ...  

Science Conference Proceedings (OSTI)

... Number: 1198 Description: When was Hiroshima bombed? ... 1264 Description: What is the atomic weight of ...

2002-04-29T23:59:59.000Z

282

Minimum Description Length Model Selection  

E-Print Network (OSTI)

Minimum Description Length Model Selection Problems and Extensions Steven de Rooij #12;#12;Minimum Description Length Model Selection Problems and Extensions #12;ILLC Dissertation Series DS-2008-07 For further-mail: illc@science.uva.nl homepage: http://www.illc.uva.nl/ #12;Minimum Description Length Model Selection

283

Project Name/Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RCA CM-3 Risk Management RCA CM-3 Risk Management Projects/Programs - RMPs, Tools, and SMEs Project Name/Description (see note below) DOE Program DOE RMP Contractor RMP Combined RMP Tools Database/Risk Analysis SMEs Federal/M&O/Consultant Integrated Biorefinery Research Facility Project EE X Research Support Facility Project EE X National Synchrotron Light Source II Project SC X 12 GeV Upgrade Project (TJL) SC X Physical Sciences Facility Project (PNNL) SC X P6, Pertmaster, Excel Mike Shay, Jason Gatelum ITER SC X (internation al pgm) P6, Pertmaster, Risk Checklist, Risk Assessor Handbook John Tapia, Colin Williams, Allen Bishop SING & SING II (SNS, OR) SC X Excel, Analytic Hierarchy, P6 Barbara Thibadeau Modernization of Lab Fac. (ORNL)

284

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

285

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

286

Technology assessment of offshore industry. The United States offshore industry. Current status, trends and forecast 1976-2000. Volume I. Final report  

SciTech Connect

Volume One presents a description of the current status of the U.S. offshore industry together with developing trends in the industry and an examination of the various forces that influence development. A 25 year forecast of offshore industry development is included. Also included is a description of the U.S. commercial ocean fishing industry and a 25 year forecast of industry development.

Durfee, J.H.

1977-08-01T23:59:59.000Z

287

Geothermal energy for industrial application  

DOE Green Energy (OSTI)

The types of geothermal resources are reviewed briefly. The uses of geothermal energy are covered under electrical generation and non-electric direct uses. (MHR)

Fulton, R.L.

1979-03-01T23:59:59.000Z

288

Applications SoftwareIT industry  

E-Print Network (OSTI)

at Argonne National Laboratory. https://www.alcf.anl.gov/resources/storage.php. [27] Cluster File System, Inc

Zakhor, Avideh

289

Industrial Applications How It Works  

the use of high-temperature materials in fossil-fuel, solar thermal, and nuclear power plants, leading to an increase in efficiency. Increasing the

290

Industrial low temperature utilization of geothermal resources  

SciTech Connect

This brief presentation on industrial utilization of low temperature geothermal resources first considers an overview of what has been achieved in using geothermal resources in this way and, second, considers potential, future industrial applications.

Howard, J.H.

1976-05-01T23:59:59.000Z

291

Industrial Utilization of Surfactants: Principles & Practice  

Science Conference Proceedings (OSTI)

This book presents, in nonmathematical fashion, the principles underlying the use of surfactants in industrial products and processes, how these principles are used to select surfactants for use in a variety of industrial applications, and tables of surfac

292

INDUSTRIAL ASSOCIATESHIP SCHEME Centre for Industrial Consultancy and Sponsored Research  

E-Print Network (OSTI)

) Refrigeration Industry (1994) Advances in Electrical Power Systems (1994) Photovoltaics for Terrestrial and Space Applications (1996) Plate Heat Exchangers: The New Wave (1996) Refrigeration under Cryogenic of Manufacturing Process Through ASP Model (2002) (v) Manufacturing Artificial Intelligence based Mechanical Design

Bhashyam, Srikrishna

293

Development of a body force description for compressor stability assessment  

E-Print Network (OSTI)

This thesis presents a methodology for a body force description of a compressor with particular application to compressor stability calculations. The methodology is based on extracting blade forces from an axisymmetric ...

Kiwada, George (George Ford)

2008-01-01T23:59:59.000Z

294

FinalReport for completed IPP-0110 and 0110A Projects:"High Energy Ion Technology of Interfacial Thin Film Coatings for Electronic, Optical and Industrial Applications"  

Science Conference Proceedings (OSTI)

The DOE-supported IPP (Initiatives for Proliferation Prevention) Project, IPP-0110, and its accompanying 'add-on project' IPP-0110A, entitled 'High Energy Ion Technology of Interfacial Thin Film Coatings for Electronic, Optical and Industrial Applications' was a collaborative project involving the Lawrence Berkeley National Laboratory (LBNL) as the U.S. DOE lab; the US surface modification company, Phygen, Inc., as the US private company involved; and the High Current Electronics Institute (HCEI) of the Russian Academy of Sciences, Tomsk, Siberia, Russia, as the NIS Institute involved. Regular scientific research progress meetings were held to which personnel came from all participating partners. The meetings were held mostly at the Phygen facilities in Minneapolis, Minnesota (with Phygen as host) with meetings also held at Tomsk, Russia (HCEI as host), and at Berkeley, California (LBNL as host) In this way, good exposure of all researchers to the various different laboratories involved was attained. This report contains the Final Reports (final deliverables) from the Russian Institute, HCEI. The first part is that for IPP-0110A (the 'main part' of the overall project) and the second part is that for the add-on project IPP-0110A. These reports are detailed, and contain all aspects of all the research carried out. The project was successful in that all deliverables as specified in the proposals were successfully developed, tested, and delivered to Phygen. All of the plasma hardware was designed, made and tested at HCEI, and the performance was excellent. Some of the machine and performance parameters were certainly of 'world class'. The goals and requirements of the IPP Project were well satisfied. I would like to express my gratitude to the DOE IPP program for support of this project throughout its entire duration, and for the unparalleled opportunity thereby provided for all of the diverse participants in the project to join in this collaborative research. The benefits are superb, as measured in quite a number of different ways.

Brown, Ian

2009-09-01T23:59:59.000Z

295

International industrial sector energy efficiency policies  

SciTech Connect

Over 40 percent of the energy consumed globally is used in the industrial sector. In China, this sector consumes an even larger proportion, reaching nearly 70 percent in 1997. A variety of energy efficiency policies and programs have been instituted in both industrialized and developing countries in an effort to improve the energy efficiency of the industrial sector. There are very few comprehensive evaluations of these industrial sector energy efficiency policies; however a number of recent workshops and conferences have included a focus on these policies. Three important meetings were the International Energy Agency's Industrial Energy Efficiency: Policies and Programs Conference in 1994, Industrial Energy Efficiency Policies: Understanding Success and Failure - A Workshop Organized by the International Network for Energy Demand Analysis in the Industrial Sector in 1998, and the American Council for an Energy-Efficient Economy's 1999 Summer Study on Energy Efficiency in Industry. Man y articles from these meetings are included as attachments to this memo. This paper provides a brief description of each of seven categories of individual industrial energy efficiency policies and programs, discuss which industrial sectors or types of equipment they apply to, and provide references for articles and reports that discuss each policy or program in more detail. We begin with mandatory-type policies and move to more voluntary-type policies. We then provide a brief description of four integrated industrial energy efficiency policies and provide references for articles and reports that describe these policies in greater detail.

Price, Lynn; Worrell, Ernst

2000-01-01T23:59:59.000Z

296

International industrial sector energy efficiency policies  

SciTech Connect

Over 40 percent of the energy consumed globally is used in the industrial sector. In China, this sector consumes an even larger proportion, reaching nearly 70 percent in 1997. A variety of energy efficiency policies and programs have been instituted in both industrialized and developing countries in an effort to improve the energy efficiency of the industrial sector. There are very few comprehensive evaluations of these industrial sector energy efficiency policies; however a number of recent workshops and conferences have included a focus on these policies. Three important meetings were the International Energy Agency's Industrial Energy Efficiency: Policies and Programs Conference in 1994, Industrial Energy Efficiency Policies: Understanding Success and Failure - A Workshop Organized by the International Network for Energy Demand Analysis in the Industrial Sector in 1998, and the American Council for an Energy-Efficient Economy's 1999 Summer Study on Energy Efficiency in Industry. Man y articles from these meetings are included as attachments to this memo. This paper provides a brief description of each of seven categories of individual industrial energy efficiency policies and programs, discuss which industrial sectors or types of equipment they apply to, and provide references for articles and reports that discuss each policy or program in more detail. We begin with mandatory-type policies and move to more voluntary-type policies. We then provide a brief description of four integrated industrial energy efficiency policies and provide references for articles and reports that describe these policies in greater detail.

Price, Lynn; Worrell, Ernst

2000-01-01T23:59:59.000Z

297

Industry Interactive Procurement System (IIPS)  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry Interactive Industry Interactive Industry Interactive Industry Interactive Procurement System Procurement System (IIPS) (IIPS) Douglas Baptist, Project Manager Information Management Systems Division US Department of Energy IIPS Functions Issue synopses, solicitations and related documents via the Internet Receive and Respond to Solicitation Specific Questions Receive proposal, bid or application information electronically Provide access to proposal information to authorized personnel through a web browser Conduct negotiations or obtain clarifications Issue award documents IIPS Security Security Plan in place and approved by DOE's Chief Information Officer System security tested by DOE's Computer Incident Advisory Capability team Security measures include: - Encryption on the IIPS server

298

Integrated Safety Management (ISM) - System Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

System Descriptions Integrated Safety Management (ISM) ism logo Sample DOE Contractor ISM System Descriptions Sample DOE Site Office ISM System Descriptions DOE HQ Program Office...

299

INDUSTRIAL SAFETY & HEALTH (ISH)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HEALTH (ISH) HEALTH (ISH) OBJECTIVE ISH.1 A comprehensive industrial safety & health program has been implemented to address applicable safety requirements at the TA 55 SST Facility. (Core Requirements 1, 3, and 4) Criteria * Procedures are implemented to address applicable industrial & health safety issues. * An adequate number of trained personnel are available to support SST facility regarding industrial safety & health concerns. * Portable fire extinguishers are appropriate for the class of fire they are expected to fight and are located within the proper distance. * Cranes, hooks, slings, and other rigging are plainly marked as to their capacity and inspected prior to use. * Forklifts and other powered lifting devices are adequately inspected.

300

ENERGY EFFICIENCY OPPORTUNITIES IN THE U.S. PULP AND PAPER INDUSTRY  

Science Conference Proceedings (OSTI)

The U.S. pulp and paper industry consumes over $7 billion worth of purchased fuels and electricity per year. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. pulp and paper industry to reduce energy consumption in a cost-effective manner. This paper provides a brief overview of the U.S. EPA ENERGY STAR(R) for Industry energy efficiency guidebook (a.k.a. the"Energy Guide") for pulp and paper manufacturers. The Energy Guide discusses a wide range of energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, facility, and organizational levels. Also provided is a discussion of the trends, structure, and energy consumption characteristics of the U.S. pulp and paper industry along with a description of the major process technologies used within the industry. Many energy efficiency measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in pulp and paper mills and related industries worldwide. The information in this Energy Guide is intended to help energy and plant managers in the U.S. pulp and paper industry reduce energy consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures?as well as on their applicability to different production practices?is needed to assess their cost effectiveness at individual plants.

Kramer, Klaas Jan; Masanet, Eric; Worrell, Ernst

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

ET Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ET Industries, Inc. ET Industries, Inc. (showerheads) Issued: May 24, 2013 BEFORE THE U.S. DEPARTMENT OF ENERGY Washington, D.C. 20585 ) ) ) ) ) Case Number: 2012-SE-2902 AMENDED NOTICE OF NONCOMPLIANCE DETERMINATION 1 Manufacturers (including importers) are prohibited from distributing covered products in the United States that do not comply with applicable federal water conservation standards. See 10 C.F.R. §§ 429.5, 429.102; 42 U.S.C. §§ 6291(10), 6302. On April 3, 2012, DOE tested one unit of the "ThunderHead" showerhead basic model ("basic model TH-1 " 2 ), which ET Industries, Inc. ("ET") imported into the United States. On April 24, 2012, DOE completed testing of three additional units of basic model TH-1, also imported into

302

Application of solar energy to the supply of industrial process hot water. Energy reduction and economic analysis report. Aerotherm report TR-76-220. [Can washing at Campbell Soup Company in California  

DOE Green Energy (OSTI)

A discussion is provided of the following aspects of the solar process hot water program: criteria and rationale used in process selection, expected fuel savings to be provided by widespread use of the solar energy system in the industry, and economic evaluation of the system. The design, construction, operation, and evaluation of a solar water heating system for application to the can washing process at the Campbell Soup Company's plant located in Sacramento, California are included.

None

1976-10-14T23:59:59.000Z

303

Applications  

Science Conference Proceedings (OSTI)

Table 6   Typical applications of duplex stainless steels...salt evaporation equipment, desalination plants, geothermal

304

Applications  

Science Conference Proceedings (OSTI)

Table 3   Wear-, erosion-, and corrosion-resistance applications of CVD...against neutron radiation

305

Industrial Wastewater Minimization in the Chemicals and Petroleum Industries Industry Technology Commentary  

Science Conference Proceedings (OSTI)

Although water is employed in all major industries, the chemicals and petroleum industries stand out as relying on a vast amount of water for their production needs. In the petroleum industry, more than half of the water is used for cooling, followed by boiler feed (roughly one-third), and then process and other uses. In the chemicals industry, the majority of water is used for cooling, followed by process applications, and then boiler and other uses. Both of these market segments have made great strides...

2011-03-31T23:59:59.000Z

306

transportation industry | OpenEI  

Open Energy Info (EERE)

25 25 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142279625 Varnish cache server transportation industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by the transportation industry. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption

307

Specifications to Improve Power Quality Immunity in Electronic Systems for Industrial Applications -- A Downloadable Web Product: Su ggestions for Higher Quality and Lower Cost Production  

Science Conference Proceedings (OSTI)

To help improve power quality performance in electronic process equipment, this technical progress report is made available to users for download in PDF (192K). Key power quality issues are presented to provide a systematic approach to integrating electronic equipment into the industrial environment. As with the traditional hardcopy version (1000693), the goal is to provide suggestions for a specification language that will allow end-users to integrate electronic industrial equipment with the existing el...

2000-12-21T23:59:59.000Z

308

The fuzzy description logic ALCFLH  

E-Print Network (OSTI)

We present the fuzzy description logic ALCF LH. ALCF LH is based on ALCF H, but linear hedges are used instead of exponential ones. This allows to solve the entailment and the subsumption problem in a fuzzy description logic, where arbitrary concepts and roles may be modified. 1

Steffen Hlldobler; Nguyen Hoang Nga; Technische Universitt Dresden; Tran Dinh Khang

2005-01-01T23:59:59.000Z

309

Associations and Industry - TMS  

Science Conference Proceedings (OSTI)

... Associations and Industry, Research Programs, ==== Basic Metallurgy ==== ... FORUMS > ASSOCIATIONS AND INDUSTRY, Replies, Views, Originator, Last...

310

Industrial Carbon Capture Project Selections  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(Partner Organizations) Funding Lead Organization Location (City, State) Project Title - Project Description 1) Large Scale Testing of Advanced Gasification Technologies Air Products & Chemicals, Inc. $71,700,000 Allentown, PA Development of ITM Oxygen Technology for Integration with Advanced Industrial Systems Air Products will accelerate commercial manufacture of ion transport membranes modules and initiate the development a 2,000 TPD pre- commercial scale facility ahead of schedule, enabling this technology

311

Industrial alliances  

Science Conference Proceedings (OSTI)

The United States is emerging from the Cold War era into an exciting, but challenging future. Improving the economic competitiveness of our Nation is essential both for improving the quality of life in the United States and maintaining a strong national security. The research and technical skills used to maintain a leading edge in defense and energy now should be used to help meet the challenge of maintaining, regaining, and establishing US leadership in industrial technologies. Companies recognize that success in the world marketplace depends on products that are at the leading edge of technology, with competitive cost, quality, and performance. Los Alamos National Laboratory and its Industrial Partnership Center (IPC) has the strategic goal to make a strong contribution to the nation`s economic competitiveness by leveraging the government`s investment at the Laboratory: personnel, infrastructure, and technological expertise.

Adams, K.V.

1993-09-13T23:59:59.000Z

312

Applications  

Science Conference Proceedings (OSTI)

Table 8   Major markets for ABS products...Market category Applications ABS grades Major appliances Refrigerator door and food liners; crisper pans;

313

Applications  

Science Conference Proceedings (OSTI)

Table 5   Selected applications for wrought aluminum alloys...vehicles, trucks and trailers 3105 Residential siding, mobile homes, rain-carrying goods,

314

Development of drilling foams for geothermal applications  

DOE Green Energy (OSTI)

The use of foam drilling fluids in geothermal applications is addressed. A description of foams - what they are, how they are used, their properties, equipment required to use them, the advantages and disadvantages of foams, etc. - is presented. Geothermal applications are discussed. Results of industry interviews presented indicate significant potential for foams, but also indicate significant technical problems to be solved to achieve this potential. Testing procedures and results of tests on representative foams provide a basis for work to develop high-temperature foams.

McDonald, W.J.; Remont, L.J.; Rehm, W.A.; Chenevert, M.E.

1980-01-01T23:59:59.000Z

315

Descriptive Model of a Generic WAMS | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS The Department of Energy's (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation's electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study. Descriptive Model of a Generic WAMS More Documents & Publications Securing Wide Area Measurement Systems 2012 Advanced Applications Research & Development Peer Review - Day 1

316

Energy Efficiency Improvement and Cost Saving Opportunities for the U.S. Iron and Steel Industry An ENERGY STAR(R) Guide for Energy and Plant Managers  

Science Conference Proceedings (OSTI)

Energy is an important cost factor in the U.S iron and steel industry. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. iron and steel industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the structure, production trends, energy consumption, and greenhouse gas emissions of the iron and steel industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in the steel and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers in the U.S. iron and steel industry reduce energy consumption and greenhouse gas emissions in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures?and on their applicability to different production practices?is needed to assess their cost effectiveness at individual plants.

Worrell, Ernst; Blinde, Paul; Neelis, Maarten; Blomen, Eliane; Masanet, Eric

2010-10-21T23:59:59.000Z

317

Mobile gaming: Industry challenges and policy implications  

Science Conference Proceedings (OSTI)

Mobile games are a prime example of a successful mobile application and demonstrate the increasing range of platforms for the media and entertainment industries. Against this convergent background, this paper introduces the basic features of the mobile ... Keywords: Gaming industry, Mobile content and applications, Mobile ecosystem, Mobile gaming

Claudio Feijoo; Jos-Luis Gmez-Barroso; Juan-Miguel Aguado; Sergio Ramos

2012-04-01T23:59:59.000Z

318

Guidelines for Estimating Unmetered Industrial Water Use  

SciTech Connect

The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

Boyd, Brian K.

2010-08-01T23:59:59.000Z

319

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Acquisition Acquisition Description/ Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference/ Industry Meetings Draft- Solicitation Synopsis Solicitation Receipt of Proposal Anticipated Evaluations Complete/Award Paducah GDP http://www.emcbc.doe.g ov/pgdp%20deactivatio n/ EMCBC Multiple award IDIQ contract holders Cost Plus Award Fee with Fixed Price clins $600M- $680M 5/1/2013 5/29/2013 N/A 8/9/2013 Jul-Sep 2013 Oct-Dec 2014 ETEC EMCBC Small Business Firm-Fixed Price & Fixed Unit Rate Price CLINS $25M-$40M 9/19/2013 Jul-Sep 2013 Oct-Dec 2013 Oct-Dec 2013 Jan-Mar 2014 Jul-Sep 2014 Lab Services EMCBC Small Business Fixed Price $40M-$60M Jan-Mar 2014 Jan-Mar 2014 Jan-Mar 2014 Apr-Jun 2014 Apr-Jun 2014 Jan-Mar 2015

320

Air pollutant emissions prediction by process modelling - Application in the iron and steel industry in the case of a re-heating furnace  

Science Conference Proceedings (OSTI)

Monitoring air pollutant emissions of large industrial installations is necessary to ensure compliance with environmental legislation. Most of the available measurement techniques are expensive, and measurement conditions such as high-temperature emissions, ... Keywords: Artificial neural networks, CO2, Correlation method, Fume emissions, Multiple linear regression, NO2, Steelworks process modelling

Anda Ionescu; Yves Candau

2007-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Applications  

Science Conference Proceedings (OSTI)

Table 2   Applications for titanium and titanium alloys...for FGD units, nuclear waste disposal Geothermal energy Heat exchangers, evaporators, condensers, tubes Marine engineering Shipbuilding Heat exchangers, condensers, piping

322

Applications  

Science Conference Proceedings (OSTI)

Table 6 Selected applications for aluminum casting alloys...gears; jet engine compressor cases 356.0 Sand: flywheel castings; automotive transmission cases; oil pans; pump bodies. Permanent: machine tool parts;

323

Applications  

Science Conference Proceedings (OSTI)

Table 1   Application of sintered stainless steels...316L Photographic equipment 316L Cam cleats 304L Dishwasher components 304L Can opener gears 410L...

324

Laser Glazing of Railroad Rails [Laser Applications Laboratory] - Nuclear  

NLE Websites -- All DOE Office Websites (Extended Search)

Laser Glazing of Railroad Laser Glazing of Railroad Rails Capabilities Engineering Experimentation Reactor Safety Experimentation Aerosol Experiments System Components Laser Applications Overview Laser Oil & Gas Well Drilling Laser Heat Treatment Laser Welding of Metals On-line Monitoring Laser Beam Delivery Laser Glazing of Railroad Rails High Power Laser Beam Delivery Decontamination and Decommissioning Refractory Alloy Welding Robots Applications Other Facilities Other Capabilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Laser Applications Laboratory Laser Glazing of Railroad Rails Project description: Laser glazing of rails. Category: Project with industrial partner (American Association of Railroads) Bookmark and Share

325

Laser Welding of Metals [Laser Applications Laboratory] - Nuclear  

NLE Websites -- All DOE Office Websites (Extended Search)

Laser Welding of Metals Laser Welding of Metals Capabilities Engineering Experimentation Reactor Safety Experimentation Aerosol Experiments System Components Laser Applications Overview Laser Oil & Gas Well Drilling Laser Heat Treatment Laser Welding of Metals On-line Monitoring Laser Beam Delivery Laser Glazing of Railroad Rails High Power Laser Beam Delivery Decontamination and Decommissioning Refractory Alloy Welding Robots Applications Other Facilities Other Capabilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Laser Applications Laboratory Laser Welding of Metals Project description: High-speed laser welding of metals. Category: Project with industrial partner (Delphi Energy and Engine Management Systems) Bookmark and Share

326

Laser Heat Treatment [Laser Applications Laboratory] - Nuclear Engineering  

NLE Websites -- All DOE Office Websites (Extended Search)

Heat Treatment Heat Treatment Capabilities Engineering Experimentation Reactor Safety Experimentation Aerosol Experiments System Components Laser Applications Overview Laser Oil & Gas Well Drilling Laser Heat Treatment Laser Welding of Metals On-line Monitoring Laser Beam Delivery Laser Glazing of Railroad Rails High Power Laser Beam Delivery Decontamination and Decommissioning Refractory Alloy Welding Robots Applications Other Facilities Other Capabilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Laser Applications Laboratory Laser Heat Treatment Project description: Optimization of laser beam heat treatment. Category: Project with industrial partner (Caterpillar and USCAR) Bookmark and Share Heat treatment optics

327

Applications:  

NLE Websites -- All DOE Office Websites (Extended Search)

Applications: Applications: ● Telecommunications: cell / smartphone; multi-party secure phone calls; videoconferencing; Voice over IP (VoIP) ● Banking and financial transactions: ATM, debit / credit card and e-Commerce ● e-Business; e-gaming; e-books; e-music; e-movies; e-gambling ● Wireless internet ● Electronic voting ● Facility and vehicle access ● Information exchange for government/defense

328

Transforming the Freight Industry  

E-Print Network (OSTI)

Transforming the Freight Industry From Regulation to Icommon-carrier freight industry was Competition to backwardjourneys. When the freight industry was deregulated, it was

Regan, Amelia

2002-01-01T23:59:59.000Z

329

Demographics and industry returns  

E-Print Network (OSTI)

Demographics and Industry Returns By Stefano DellaVigna andand returns across industries. Cohort size fluc- tuationspredict profitability by industry. Moreover, forecast demand

Pollet, Joshua A.; DellaVigna, Stefano

2007-01-01T23:59:59.000Z

330

Cost Calculating of Optoelectronics - An Analysis of Cost Items for a Camera Application used in the Automotive Industry at Volvo Cars Corporation.  

E-Print Network (OSTI)

??The purpose of the thesis was to define the manufacturing process of a camera application with included optics and its integration with electronics and verify (more)

Vekariya, Nimisha

2011-01-01T23:59:59.000Z

331

Analysis of industrial load management  

SciTech Connect

Industrial Load Management, ILM, has increased the possibilities of changing load profiles and raising load factors. This paper reports on load profile measurements and feasible load management applications that could be implemented in industry e.g. bivalent systems for heating of premises and processes, load priority systems, energy storage and rescheduling processes or parts of processes due to differential electricity rates. Industrial load variations on hourly, daily and seasonal basis are treated as well as the impact by load management on load curves e g peak clipping, valley filling and increased off-peak electricity usage.

Bjork, C.O.; Karlsson, B.G.

1986-04-01T23:59:59.000Z

332

Industrial Carbon Management Initiative (ICMI)  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Carbon Management Initiative Industrial Carbon Management Initiative (ICMI) Background The ICMI project is part of a larger program called Carbon Capture Simulation and Storage Initiative (C2S2I). The C2S2I has a goal of expanding the DOE's focus on Carbon Capture Utilization and Storage (CCUS) for advanced coal power systems and other applications, including the use of petroleum coke as a feedstock for the industrial sector. The American Recovery and Re-Investment Act (ARRA)-funded

333

FAQS Qualification Card - Industrial Hygiene | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FAQS Qualification Card - Industrial Hygiene FAQS Qualification Card - Industrial Hygiene FAQS Qualification Card - Industrial Hygiene A key element for the Department's Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA). For each functional area, the FAQS identify the minimum technical competencies and supporting knowledge and skills for a typical qualified individual working in the area. FAQC-IndustrialHygiene.docx Description Industrial Hygiene Qualification Card More Documents & Publications FAQS Gap Analysis Qualification Card - Industrial Hygiene

334

Industry Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

idatech.com idatech.com info@idatech.com 63065 NE 18 th Street Bend, OR 97701 541.383.3390 Industry Perspective Biogas and Fuel Cell Workshop National Renewable Energy Laboratory June 11 - 13, 2012 Mike Hicks Chairman of the Board of Directors, FCHEA Treasurer of the Board of Directors, FCS&E Engineering Manager, Technology Development & Integration, IdaTech Outline 1. Critical Factors * Fuel Purity * Fuel Cost 2. Natural Gas - The Wild Card & Competition 3. IdaTech's Experience Implementing Biofuel Critical Factor - Fuel Purity All fuel cell system OEMs have fuel purity specifications * Independent of * Raw materials or feed stocks * Manufacturing process * Depends on * Fuel processor technology * Fuel cell technology - low temp PEM versus SOFC

335

Fluoride Control in the Aluminum Industry: 100 Years of Technology  

Science Conference Proceedings (OSTI)

Jan 1, 2007 ... TMS Member price: 10.00. Non-member price: 25.00. TMS Student Member price : 10.00. Product In Stock. Description The aluminum industry...

336

Chapter 3, Commercial and Industrial Lighting Controls Evaluation Protocol: The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Commercial and 3: Commercial and Industrial Lighting Controls Evaluation Protocol Stephen Carlson, DNV KEMA Subcontract Report NREL/SR-7A30-53827 April 2013 The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures 3 - 1 Chapter 3 - Table of Contents 1 Measure Description .............................................................................................................. 2 2 Application Conditions of Protocol ....................................................................................... 3 3 Savings Calculations .............................................................................................................. 5 3.1 Algorithms ....................................................................................................................... 5

337

Specifications to Improve Power Quality Immunity in Electronic Systems for Industrial Applications: Suggestions for Higher Quality a nd Lower Cost Production  

Science Conference Proceedings (OSTI)

The goal of the work described in this report is to provide suggestions for a specification language that will allow end-users to integrate successfully electronic industrial equipment with the existing electrical systems. Cost effective solutions to improve system reliability and performance are specifically addressed. The intention is to eliminate disruptions induced by power quality-related problems and incompatibilities between process equipment and the electrical environment. Most of these technique...

2000-11-02T23:59:59.000Z

338

Industrial battery stack  

SciTech Connect

A novel industrial battery stack is disclosed, wherein positive plates which have been longitudinally wrapped with a perforate or semi-perforate material are accurately aligned with respect to the negative plates and separators in the stack during the stacking operation. The novel spacing members of the present invention have a generally U-shaped cross section for engaging through the wrapping a portion of the positive plate adjacent to the longitudinal edges of that plate. Projections protruding substantially from the base of the ''U'' provide the proper distance between the edge of the wrapped plate and an adjacent longitudinal surface. During the stacking and burning operation, this longitudinal surface comprises the back wall of a novel industrial battery plate holder. Following the burning of the battery stack and its subsequent assembly into an appropriate industrial battery case, the spacing member or members act to protect the positive battery plates and retain them in their proper alignment during the operation of the battery. Applicants have also provided a novel apparatus and method for stacking, aligning and burning industrial battery stacks which comprises a battery stack holder having several upstanding walls which define a stacking column having a coplanar terminus. An adjustably locatable partition within said stacking column may be disposed at any of a plurality of positions parallel with respect to the coplanar terminus so that the battery stack holder may be adjusted for any of a variety of given sizes of plates and separators. The battery plates and separators may then be stacked into the battery stack holder so that only the plate lugs extrude beyond the coplanar terminus. A dam is insertable along the top of the battery plates and across the top of the upstanding side walls of the battery stack holder to facilitate the rapid efficient burning of the industrial battery stack.

Digiacomo, H.L.; Sacco, J.A.

1980-08-19T23:59:59.000Z

339

Description  

E-Print Network (OSTI)

A handbook for executives and non-executives in healthcare organisations February 2006DH INFORMATION READER BOX Policy HR / Workforce

unknown authors

2006-01-01T23:59:59.000Z

340

Description  

E-Print Network (OSTI)

When incorrect prices are determined in the market, the IMO can replace the incorrect prices with administered prices in accordance with the Market Rules within two business days. Suppliers and consumers that respond to high prices that are later determined to be incorrect and replaced by lower administered prices lose significant production and income and become hesitant to respond to price signals otherwise provided. To increase their confidence in the price signals, they market participants would like to be compensated for losses in the event that prices are corrected/administered and they would like to be notified of potential price corrections as close to real-time as possible. Non-market participants who independently respond to pricing signals in the market may also suffer from a loss of production and income as a result of incorrectly posted prices. However, the issues related to non-market participants will not be included in this particular discussion. Background The current Market Rules allow for the IMO to administer price when the market

unknown authors

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Description  

E-Print Network (OSTI)

When incorrect prices are determined in the market, the IMO can replace the incorrect prices with administered prices in accordance with the Market Rules within two business days. Suppliers and consumers that respond to high prices that are later determined to be incorrect and replaced by lower administered prices may lose significant production and income and subsequently become hesitant to respond to price signals otherwise provided. To increase their confidence in the price signals, they market participants would like to be compensated for losses in the event that prices are corrected/administered and they would like to be notified of potential price corrections as close to real-time as possible. Non-market participants who independently respond to pricing signals in the market may also suffer from a loss of production and income as a result of incorrectly posted prices. However, the issues related to non-market participants will not be included inunder this particular discussionissue. Background The current Market Rules allow for the IMO to administer price when the market pricing mechanisms are not functioning normally (Chapter 7, Section 8,4). More specifically, the IMO will administer prices under in the following three situations: Failure to publish prices due to a forced or planned outage to the hardware, software or communications systems that support the dispatch algorithm The published prices are incorrect due to incorrect inputs to the dispatch algorithm Market suspension There have been a number of occasions when prices have been administered, such as during the market suspension resulting from the August 2003 blackout or, more typically, on occasions when market related systems fail or are on outage. Often price is administered automatically before incorrect prices can be published, but at times the incorrect prices cannot and are not detected before being published and must be changed after the fact.

unknown authors

2004-01-01T23:59:59.000Z

342

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Description of Building Types Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

343

Office of Industrial Technologies: Industry partnerships  

SciTech Connect

US industries are making progress in turning the vision of the future into reality: More effective competition in global markets, increased industrial efficiency, more jobs, reduced waste generation and greenhouse gas emissions (to 1990 levels), improved environment. DOE`s Office of Industrial Technologies is catalyzing and supporting industry progress in many ways. This pamphlet gives an overview of OIT.

1995-04-01T23:59:59.000Z

344

Applications  

Science Conference Proceedings (OSTI)

Table 3   Major application areas of porous P/M materials...refining Semiconductor Particle removal process gas Bulk gas delivery systems Purifier media retainers Analysis instruments Gas/liquid chromatography Gas sampling Sensor protection Chemical processing Catalyst recovery Process gases and liquids Fluid-bed reactor products Mineral processing Coal,...

345

Applications  

Science Conference Proceedings (OSTI)

Table 3   Some applications of investment casting...Electrical equipment Electronics, radar Guns and small armaments Hand tools Jewelry Machine tools Materials handling equipment Metal working equipment Oil well drilling and auxiliary equipment Optical equipment Packaging equipment Pneumatic and hydraulic systems Prosthetic appliances Pumps Sports gear...

346

Applications  

Science Conference Proceedings (OSTI)

Table 9   Applications of various polymers...bins 767 aircraft acoustical tile 767 and other Boeing aircraft brackets Airbus A320 bulk cargo floor sandwich structural panels Airbus A330-340 lower wing fairings A3XX main stair case (developmental) Beluga heavy-duty entrance floor panels Dornier 328 landing flap ribs Dornier 328 ice protection...

347

Technologies Applications  

E-Print Network (OSTI)

evaporation systems n Potential mining applications (produced water) nIndustry applications for which silicaLicensable Technologies Applications: n Cooling tower systems n Water treatment systems n Water needed n Decreases the amount of makeup water and subsequent discharged water (blowdown) n Enables

348

The changing battery industry  

SciTech Connect

This report provides an economic and technological assessment of the electrical battery industry, highlighting major trends. Among those systems considered are lithium-based, sodium-sulfur nickel-zinc, nickel-iron, nickel-hydrogen, zinc-chloride, conductive polymer, and redox cells. Lead-acid, nickel-cadmium, and manganese dioxide-based batteries and direct solar power and fuel cells are discussed in relation to these new techniques. New applications, including electric vehicles, solar power storage, utility load leveling, portable appliances, computer power and memory backup, and medical implants are discussed. Predictions and development scenarios for the next twenty years are provided for the U.S. market.

Not Available

1987-01-01T23:59:59.000Z

349

Science Accelerator Resource Descriptions, Office of Scientific...  

NLE Websites -- All DOE Office Websites (Extended Search)

Resource Descriptions Below you will find descriptions of each of the scientific and technical resources searchable in the Science Accelerator. DOE Data Explorer Locate collections...

350

Water reuse and recycle in the US steam-electric-generating industry - an assessment of current practice and potential for future applications  

Science Conference Proceedings (OSTI)

The study assesses the current and future potential for wastewater reuse and recycle by the steam-electric-generating industry in the United States. Fifty-three power plants employing one or more of the following reuse/recycle measures were identified by a literature search and interviews with reuse/recycle experts--cascading higher-quality wastewaters to lower-quality uses, recirculating ash sluice water, using cooling tower makeup or sidestream softening, treating and reclaiming wastewaters, using dry-cooling systems, and using municipal effluents as plant-intake water. Detailed case studies were performed on eight of the 53 plants surveyed.

Breitstein, L.; Tucker, R.C.

1986-01-01T23:59:59.000Z

351

Comparison of coal-based systems: marketability of medium-Btu gas and SNG (substitute natural gas) for industrial applications. Final report, July 1979-March 1982  

Science Conference Proceedings (OSTI)

In assessing the marketability of synthetic fuel gases from coal, this report emphasizes the determination of the relative attractiveness of substitute natural gas (SNG) and medium-Btu gas (MBG) for serving market needs in eight industrial market areas. The crucial issue in predicting the marketability of coal-based synthetic gas is the future price level of competing conventional alternatives, particularly oil. Under a low oil-price scenario, the market outlook for synthetic gases is not promising, but higher oil prices would encourage coal gasification.

Olsen, D.L.; Trexel, C.A.; Teater, N.R.

1982-05-01T23:59:59.000Z

352

Microscopic Description of Induced Fission  

E-Print Network (OSTI)

Selected aspects of the description of neutron-induced fission in 240Pu in the framework of the nuclear energy density functional theory at finite temperature are presented. In particular, we discuss aspects pertaining to the choice of thermodynamic state variables, the evolution of fission barriers as function of the incident neutron energy, and the temperatures of the fission fragments.

N. Schunck

2013-02-22T23:59:59.000Z

353

Technical Qualification Program Description - Integrated Support Center, Chicago Office  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DEPART ENT of Office of DEPART ENT of Office of ENERGY I Science Integrated Support Center Chicago Office Technical Qualification Program Description ~~~~~~'?£H(.k:1/Zi.':"r'fl. ; ;!. / ; h tJ/ tl oxa nn e E. Purucker, M anager ~ Office of Science - Chicago Office Technical Qualification Program Description Revision 2, November 2010 CONCURRENCE The Office of Science-Chicago Office (SC-CH) is the sponsor for this Technical Qualification Program (TQP) Description. This is applicable to SC-CH, New Brunswick Laboratory (NBLL Ames Site Office (AMSO) and Argonne Site Office (ASO). These offices are in joint participation and endorsement of the SC-CH Technical Qualification Program process and have also provided concurrence below. The SC-CH Manager is the approval authority for this program description.

354

Orion Bus Industries | Open Energy Information  

Open Energy Info (EERE)

Bus Industries Bus Industries Jump to: navigation, search Name Orion Bus Industries Place Ontario, Canada Information About Partnership with NREL Partnership with NREL Yes Partnership Type Other Relationship Partnering Center within NREL Transportation Technologies and Systems Partnership Year 2001 Link to project description http://www.nrel.gov/news/press/2002/3002_hybird_buses.html LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Orion Bus Industries is a company located in Ontario, Canada. References Retrieved from "http://en.openei.org/w/index.php?title=Orion_Bus_Industries&oldid=381704" Categories: Clean Energy Organizations Companies Organizations What links here Related changes Special pages Printable version Permanent link Browse properties

355

Information Technology Standards Choices and Industry Structure Outcomes: The Case of the U.S. Home Mortgage Industry  

Science Conference Proceedings (OSTI)

Vertical IS standards prescribe data structures and definitions, document formats, and business processes for particular industries, in contrast to generic information technology (IT) standards, which concern IT characteristics applicable to many industries. ... Keywords: Adoption, Effects Of Standards, Implementation, Industry Structure, Industry-Level Effects, Is Standards, It Choices, Vertical Standards

Rolf T. Wigand; Charles W. Steinfield

2005-11-01T23:59:59.000Z

356

Linking Energy Efficiency and ISO: Creating a Framework for Sustainable Industrial Energy Efficiency  

E-Print Network (OSTI)

application of energy efficiency standards in China andfor Sustainable Industrial Energy Efficiency in China. Model for Industrial Energy Efficiency, In Proceedings of

McKane, Aimee; Perry, Wayne; Aixian, Li; Tienan, Li; Williams, Robert

2005-01-01T23:59:59.000Z

357

Text REtrieval Conference (TREC) System Description  

Science Conference Proceedings (OSTI)

Text REtrieval Conference (TREC) System Description. Organization Name: Los Alamos National Laboratory, Run ID: lanl981. ...

358

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS AND CONTROL INSTRUMENTATION, VOL. JECI-14, NO. 1, APRIL 1967 A Study of the Applications of Analog Computers  

E-Print Network (OSTI)

1967 A Study of the Applications of Analog Computers V. P. KODALI, MEMBER, IEEE Abstract-An electronic analog computer is a tool for solving mathematical differential equations. The basis for the use of such a computer in the simulation of many scientific and engineering prob- lems is the possibility

Leach Jr.,W. Marshall

359

Brief description of image based 3D face recognition methods  

Science Conference Proceedings (OSTI)

The goal of this paper is to presents Brief Description of literature on Image Based human and machine recognition of faces during 1987 to 2010. Machine recognition of faces has several applications. As one of the most successful applications of image ... Keywords: 3D Face Recognition, 3D Morphable Model, Categorization, Face Detection, Face Recognition from Image Sequences, Independent Component Analysis, Linear Discriminate Analysis, Principal Component Analysis, Video based face recognition, research Issues

Sushma Jaiswal; Sarita Singh Bhadauria; Rakesh Singh Jadon; Tarun Kumar Divakar

2010-12-01T23:59:59.000Z

360

Quality Assurance Requirements and Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QjCivilianRadioactive QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160 Successful implementation of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance (QA) program is essential for the OCRWM to carry out its mission. Our mission is to manage and dispose ofbigh-Ievel radioactive waste and spent nuclear fuel in a manner that protects health, safety, and the environment; enhances national and energy security; and merits

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy Consumption Survey (CBECS) > Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 and 2003 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

362

Position Description Fox Valley Forge  

E-Print Network (OSTI)

. · Estimate costs and submit bids for engineering · Study industrial processes to determine where and how of equipment, components and systems. · Develop and test models of alternate designs and processing methods design proposals, specifications, manuals, and other data to evaluate the feasibility, cost

Heller, Barbara

363

Technology applications bulletins: Number one  

SciTech Connect

Martin Marietta Energy Systems, Inc. (Energy Systems), operates five facilities for the US Department of Energy (DOE): the Oak Ridge National Laboratory (ORNL), which is a large, multidisciplinary research and development (R and D) center whose primary mission is energy research; the Oak Ridge Y-12 Plant, which engages in defense research, development, and production; and the uranium-enrichment plants at Oak Ridge; Paducah, Kentucky; and Portsmouth, Ohio. Much of the research carried out at these facilities is of interest to industry and to state or local governments. To make information about this research available, the Energy Systems Office of Technology Applications publishes brief descriptions of selected technologies and reports. These technology applications bulletins describe the new technology and inform the reader about how to obtain further information, gain access to technical resources, and initiate direct contact with Energy Systems researchers.

Koncinski, W. Jr. (ed.)

1989-02-01T23:59:59.000Z

364

Application - Lawrence Livermore National Laboratory  

Search & Browse Software: Licensing Instructions: Patents: Application. Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 ...

365

Geometric Complexity and Minimum Description Length Principle  

E-Print Network (OSTI)

The question of how one should decide among competing explanations of data is at the heart of the scientific enterprise. Quantitative methods of selecting among models have been advanced over the years without an underlying theoretical framework to guide the enterprise and evaluate new developments. In this paper, we show that differential geometry provides a unified understanding of the model selection problem. Foremost among its contributions is a reconceptualization of the problem as one of counting probability distributions. This reconceptualization naturally leads to development of a "geometric" complexity measure, which turns out to be equal to the Minimum Description Length (MDL) complexity measure Rissanen (1996) recently proposed. We demonstrate an application of the geometric complexity measure to model selection in cognitive psychology, with models of cognitive modeling in three different areas (psychophysics, information integration, categorization).

In Jae Myung; Shaobo Zhang; Mark A. Pitt

1999-01-01T23:59:59.000Z

366

Implementation of solar industrial process heat: summary  

SciTech Connect

The implementation of solar industrial process heat systems will depend not only on the successful development of reliable and efficient solar technologies, but also on the intelligent and sound application of process engineering principles. This poses an important challenge which must be given increasing attention if SIPH systems are to be adopted by industry. (MOW)

Kearney, D. W.

1979-11-01T23:59:59.000Z

367

Industrial tomography applied to reactor safety  

SciTech Connect

Work has begun which explores the use of Computed Axial Tomography (CAT), boundary detection, and internal surface reconstruction techniques in industrial nondestructive testing applications. This initial work is intended to inform the reader of the existence and interrelated nature of these techniques through the use of a realistic simulation of an industrial inspection problem.

Kruger, R.P.

1977-01-01T23:59:59.000Z

368

LASER Welding Survey for Power Generation Industry  

Science Conference Proceedings (OSTI)

EPRI has developed technology for laser weld repair of steam generator tubes in light water reactors. This technology has promise for other specialized welding and heat treatment applications in the power generation industry.

1998-04-23T23:59:59.000Z

369

Lean enterprise in the construction industry  

E-Print Network (OSTI)

This thesis explores the application of the Lean Enterprise Model (LEM) to construction firms. LEM is a framework derived from lean manufacturing principles by MIT's Lean Aerospace Initiative (LAI) for the aerospace industry. ...

Marchini-Blanco, Juan, 1971-

2004-01-01T23:59:59.000Z

370

Industrial Oil Products Division Student Award  

Science Conference Proceedings (OSTI)

Awarded to a graduate student for travel to AOCS Annual Meeting & Expo to present a paper. Industrial Oil Products Division Student Award Divisions achievement agricultural analytical application award awards biotechnology detergents distinguished

371

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

| Industrial Program Coordinator | Publications Courtesy of The New York Times, Noah Berger The overall goal of the plan to enhance the NSLS facility's Industrial Users'...

372

Uranium industry annual 1997  

SciTech Connect

This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

NONE

1998-04-01T23:59:59.000Z

373

Construction Industry Institute  

Science Conference Proceedings (OSTI)

... in one of our country's most vital industries. ... An industry-led program to disseminate practical ... fire-proofing materials, connections, and steel trusses; ...

2010-10-05T23:59:59.000Z

374

Retail Settlement Agent: Technical Description  

Science Conference Proceedings (OSTI)

The energy industry is in the process of restructuring itself from an array of vertically integrated, regulated monopolies into competitive supply chains. One of the most significant changes for the energy business infrastructure in this era of disaggregation is the need for settling up between various unbundled entities comprising these energy supply chains. Settlement is a new business process for utilities. Some settlement activities have taken place at the wholesale level; however, these settlements ...

2000-03-29T23:59:59.000Z

375

Descriptive Model of Generic WAMS  

Science Conference Proceedings (OSTI)

The Department of Energys (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nations electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

376

Content of System Design Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-3024-2011 August 2011 ________________________ Superseding DOE-STD-3024-98 DOE STANDARD CONTENT OF SYSTEM DESIGN DESCRIPTIONS U.S. Department of Energy AREA EDCO Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-3024-2011 ii Available on the Department of Energy Technical Standards web page at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-3024-2011 iii CONTENTS PAGE Foreword ..................................................................................................................................................... iv 1. PURPOSE ............................................................................................................................................1

377

Preliminary draft industrial siting administration permit application: Socioeconomic factors technical report. Final technical report, November 1980-May 1982. [Proposed WyCoalGas project in Converse County, Wyoming  

SciTech Connect

Under the with-project scenario, WyCoalGas is projected to make a difference in the long-range future of Converse County. Because of the size of the proposed construction and operations work forces, the projected changes in employment, income, labor force, and population will alter Converse County's economic role in the region. Specifically, as growth occurs, Converse County will begin to satisfy a larger portion of its own higher-ordered demands, those that are currently being satisfied by the economy of Casper. Business-serving and household-serving activities, currently absent, will find the larger income and population base forecast to occur with the WyCoalGas project desirable. Converse County's economy will begin to mature, moving away from strict dependence on extractive industries to a more sophisticated structure that could eventually appeal to national, and certainly, regional markets. The technical demand of the WyCoalGas plant will mean a significant influx of varying occupations and skills. The creation of basic manufacturing, advanced trade and service sectors, and concomitant finance and transportation firms will make Converse County more economically autonomous. The county will also begin to serve market center functions for the smaller counties of eastern Wyoming that currently rely on Casper, Cheyenne or other distant market centers. The projected conditions expected to exist in the absence of the WyCoalGas project, the socioeconomic conditions that would accompany the project, and the differences between the two scenarios are considered. The analysis is keyed to the linkages between Converse County and Natrona County.

1982-01-01T23:59:59.000Z

378

Preliminary draft industrial siting administration permit application: Socioeconomic factors technical report. Final technical report, November 1980-May 1982. [Proposed WyCoalGas project in Converse County, Wyoming  

SciTech Connect

Under the with-project scenario, WyCoalGas is projected to make a difference in the long-range future of Converse County. Because of the size of the proposed construction and operations work forces, the projected changes in employment, income, labor force, and population will alter Converse County's economic role in the region. Specifically, as growth occurs, Converse County will begin to satisfy a larger portion of its own higher-ordered demands, those that are currently being satisfied by the economy of Casper. Business-serving and household-serving activities, currently absent, will find the larger income and population base forecast to occur with the WyCoalGas project desirable. Converse County's economy will begin to mature, moving away from strict dependence on extractive industries to a more sophisticated structure that could eventually appeal to national, and certainly, regional markets. The technical demand of the WyCoalGas plant will mean a significant influx of varying occupations and skills. The creation of basic manufacturing, advanced trade and service sectors, and concomitant finance and transportation firms will make Converse County more economically autonomous. The county will also begin to serve market center functions for the smaller counties of eastern Wyoming that currently rely on Casper, Cheyenne or other distant market centers. The projected conditions expected to exist in the absence of the WyCoalGas project, the socioeconomic conditions that would accompany the project, and the differences between the two scenarios are considered. The analysis is keyed to the linkages between Converse County and Natrona County.

Not Available

1982-01-01T23:59:59.000Z

379

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Module calculates

380

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Demand Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Demand Module calculates energy consumption for the four Census Regions (see Figure 5) and disaggregates the energy consumption

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Print - Industrial Partnerships Office  

... there is an increased need for new engine technologies which can increase fuel efficiency and meet strict pollution standards. Description ...

382

Zoe Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Issued: February 9, 2012 Issued: February 9, 2012 BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2011-SW-2912 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Zoe Industries, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated against Respondent pursuant to 10 C.F.R. § 429.122 by Notice of Proposed Civil Penalty, alleging that Respondent distributed in commerce in the United States the Giessdorf eight-jet basic model showerhead, SKU 150043, which failed to meet the applicable standard for water usage. See 10 C.F.R. § 430.32(p). 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement

383

Zoe Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

D.C. 20585 D.C. 20585 ) ) ) ) ) Case Number: 2011-SW-2912 Issued: September 28, 2011 NOTICE OF NONCOMPLIANCE DETERMINATION Manufacturers and private labelers are prohibited from distributing covered products that do not comply with applicable Federal water conservation standards. 10 C.F.R. § 429.102; 42 U.S.C. § 6302. On July 20, 2011, DOE tested four units of the Giessdorf eight-jet basic model showerhead, SKU 150043 ("Giessdorf 150043"), manufactured by GiessdorfPlumbing, Inc. ("Giessdorf"), and imported by Zoe Industries, Inc. ("Zoe"), in accordance with DOE test procedures (10 C.F.R. Part 430, Subpart B, Appendix S). DOE's testing demonstrated that the Giessdorf 150043 model is not in compliance with Federal law. First, Federal water conservation standards require that the water flow for a showerhead

384

End User Perspective - Industrial  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid State Research Center Solid State Research Center DOE Fuel Cell Portable Power Workshop End User Perspective - Industrial Consumer Electronics Power (< 20-50W) Department of Energy Fuel Cell Portable Power Workshop Jerry Hallmark Manager Energy Technologies Lab Motorola Labs Solid State Research Center DOE Fuel Cell Portable Power Workshop Outline * Energy & Power of Portable Devices * Fuel Cell Applications & Cost * Key Requirements & Challenges * Fuels for Portable Fuel Cells * Fuel Transportation Regulations and Standards * Methanol Fuel Cells - Direct Methanol Fuel Cells - Reformed Methanol Fuel Cells * Technical Challenges 2 Solid State Research Center DOE Fuel Cell Portable Power Workshop Portable Electronics Yearly Energy Usage  :KU 1990 1980  :KU

385

Energy Efficiency Improvement and Cost Saving Opportunities for the Fruit and Vegetable Processing Industry. An ENERGY STAR Guide for Energy and Plant Managers  

SciTech Connect

The U.S. fruit and vegetable processing industry--defined in this Energy Guide as facilities engaged in the canning, freezing, and drying or dehydrating of fruits and vegetables--consumes over $800 million worth of purchased fuels and electricity per year. Energy efficiency improvement isan important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. fruit and vegetable processing industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. fruit and vegetable processing industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures applicable to fruit and vegetable processing plants are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in fruit and vegetable processing facilities and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. Given the importance of water in fruit and vegetable processing, a summary of basic, proven measures for improving plant-level water efficiency are also provided. The information in this Energy Guide is intended to help energy and plant managers in the U.S. fruit and vegetable processing industry reduce energy and water consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures--as well as on their applicability to different production practices--is needed to assess their cost effectiveness at individual plants.

Masanet, Eric; Masanet, Eric; Worrell, Ernst; Graus, Wina; Galitsky, Christina

2008-01-01T23:59:59.000Z

386

Energy Efficiency Improvement and Cost Saving Opportunities for the Petrochemical Industry - An ENERGY STAR(R) Guide for Energy and Plant Managers  

Science Conference Proceedings (OSTI)

Energy is the most important cost factor in the U.S petrochemical industry, defined in this guide as the chemical industry sectors producing large volume basic and intermediate organic chemicals as well as large volume plastics. The sector spent about $10 billion on fuels and electricity in 2004. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. petrochemical industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the petrochemical industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in the petrochemical and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers in the U.S. petrochemical industry reduce energy consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures--and on their applicability to different production practices--is needed to assess their cost effectiveness at individual plants.

Neelis, Maarten; Worrell, Ernst; Masanet, Eric

2008-09-01T23:59:59.000Z

387

Corrosion in the Oil and Gas Industry - Programmaster.org  

Science Conference Proceedings (OSTI)

Oct 20, 2010 ... Qualifying Materials for Advanced Heat Transfer Application in Oil and Gas Industry: Scott Nguyen1; Damodaran Raghu2; Kumar Sridharan3;...

388

Guidelines for Estimating Unmetered Industrial Water Use | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

approach to estimate industrial water use in evaporative cooling systems, steam boiler systems, and facility wash applications. This document assists federal agencies in the...

389

Two-Phase Liquid Dielectrics - Industrial Partnerships Office  

Industry uses liquid dielectrics for a number of applications. For example, Mineral oil is used extensively inside electrical transformers as a fluid dielectric and ...

390

Evaluation of Power Conservation Algorithms in Industrial Wireless Sensor Networks.  

E-Print Network (OSTI)

??Sensors play a prominent role in the industrialized society of today and a world without sensors is inconceivable as most of the electronic applications are (more)

Garlapati, Naveen

2012-01-01T23:59:59.000Z

391

Mobile process description and execution  

Science Conference Proceedings (OSTI)

Mobile devices are increasingly aware of their respective locations and vicinity and tend to communicate rather loosely with each other; therefore asynchronous communication paradigms are used predominately so far for corresponding mobile applications. ...

Christian P. Kunze; Sonja Zaplata; Winfried Lamersdorf

2006-06-01T23:59:59.000Z

392

Evaluating Sites for Industrial Cogeneration in Chicago  

E-Print Network (OSTI)

Cogeneration is an industrial energy conservation technology that is particularly suited to urban applications. Large cities and metropolitan areas have large numbers of energy intensive industrial firms as well as commercial buildings; universities and hospital complexes; and new, densely populated residential developments that have large thermal and electric demands. Potential sites have been evaluated as part of a project to encourage industrial cogeneration applications in Chicago. Energy-intensive industries and commercial, industrial, and residential facilities were grouped by energy use type. Natural gas and electricity consumption data then were used to develop energy use profiles by energy use type and location. Complementary thermal energy use profiles and the geographical proximity of firms and facilities were used to exclude unfavorable sites. Thirty-four sites were then evaluated in detail and ranked according to their suitability for consideration in detailed feasibility studies of different cogeneration technologies.

Fowler, G. L.; Baugher, A. H.

1982-01-01T23:59:59.000Z

393

Number: 1 Description: How did the ...  

Science Conference Proceedings (OSTI)

... Number: 80 Description: What part did ITT (International Telephone and Telegraph) and Anaconda Copper play in the ...

2003-03-03T23:59:59.000Z

394

Number: 1 Description: What powers did ...  

Science Conference Proceedings (OSTI)

... top> Number: 10 Description: What is one of the major problems with electronic producing turbines (windmills) in California? ...

2002-11-04T23:59:59.000Z

395

Climate VISION: Industry Associations  

Office of Scientific and Technical Information (OSTI)

Industry Associations Industry Associations Aluminum Aluminum Association (Coordinating aluminum industry Climate VISION activities) The Aluminum Association, Inc. is the trade association for producers of primary aluminum, recyclers and semi-fabricated aluminum products, as well as suppliers to the industry. The Association provides leadership to the industry through its programs and services which aim to enhance aluminum's position in a world of proliferating materials, increase its use as the "material of choice," remove impediments to its fullest use, and assist in achieving the industry's environmental, societal, and economic objectives. Automobile Manufacturers Alliance of Automobile Manufacturers (Coordinating automobile industry Climate VISION activities) The Alliance of Automobile Manufacturers, Inc. is a trade association

396

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Title, Location Title, Location Estimated Cost Description Determination Date: 2010 LCLS Undulator 2 is envisioned to be a 0.2 - 2keV FEL x-ray source, capable of delivering x-rays to End Station A (ESA), located in the existing Research Yard at SLAC. It will also be configurable as a non- FEL hard x-ray source capable of delivering a chirped x-ray pulse for single-shot broad-spectrum measurements. The project would entail reconstruction of the electron beam transport to End Station A, construction and installation of a new undulator in the tunnel upstream of ESA and beam dump, and construction and installation of x-ray transport, optics, and diagnostics in ESA. It also includes the construction of an annex to End Station A , providing hutches for experiment stations.

397

Ontario's Industrial Energy Services Program  

E-Print Network (OSTI)

The Ontario Ministry of Energy began offering its new Industrial Energy Services Program (IESP) in early 1987. This 3-year, $5-million program, while not new in concept, is thought to be unique for its depth of service and method of delivery. It provides Ontario's manufacturers with advice and funding assistance for the identification and definition of industrial energy efficiency opportunities. The first phase provides for a free comprehensive site energy audit/analysis, conducted over one to five days, by teams of private sector consultants, selected to match expertise with manufacturer's needs. The emphasis is on process and equipment improvements, but site services and buildings are also examined. The final report includes detailed descriptions of major opportunities, along with estimated costs, savings, and paybacks. The next phases provide for sharing the detailed feasibility study costs and project engineering costs for those energy projects that move to implementation. In this paper, the author briefly describes the novel administrative structure of the program, presents the results of the activities to date, and describes, in some detail, several case studies from different industrial sectors.

Ploeger, L. K.

1987-09-01T23:59:59.000Z

398

Monitored Geologic Repository Project Description Document  

SciTech Connect

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2001-06-26T23:59:59.000Z

399

Energy efficient industrialized housing research program  

Science Conference Proceedings (OSTI)

This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

1989-12-01T23:59:59.000Z

400

An introduction to electric industry restructuring  

SciTech Connect

This paper briefly describes the electric industry, its residential markets, industry structure and current trends. Its purpose is to provide Weatherization grants managers with the background necessary to assess their leveraging opportunities in an industry that is experiencing sweeping changes, commonly known as electric industry restructuring. The study describes the terrain of a changing industry topography on a national and regional basis, with some state and local information also provided. Weatherization managers and subgrantees who read this paper should be better able to understand the leveraging opportunities that are emerging now in the electricity market place. The reader will be introduced to the basics of the electric industry as it presently operates, the nature of the changes that are in the process of occurring, and the driving forces that are behind those changes. The major industry players are described by type and their interests are explored in further depth. There will also be an overview of the regulatory process as it has operated historically, as well as the changes now underway at both the state and federal levels. Finally, the paper will conclude with a description of some of the assets and opportunities available to those who may be interested in participating in the restructuring process in order to expand or protect low-income programs in their own states.

Eisenberg, J.F.; Berry, L.G.

1997-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

ConSol (Building Industry Research Alliance) | Open Energy Information  

Open Energy Info (EERE)

ConSol (Building Industry Research Alliance) ConSol (Building Industry Research Alliance) Jump to: navigation, search Name ConSol (Building Industry Research Alliance) Place Stockton, CA Website http://www.consol.com References ConSol (Building Industry Research Alliance)[1] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Incubator Partnering Center within NREL Electricity Resources & Building Systems Integration Partnership Year 2004 Link to project description http://www.nrel.gov/news/press/2004/382.html LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! ConSol (Building Industry Research Alliance) is a company located in Stockton, CA. References ↑ "ConSol (Building Industry Research Alliance)" Retrieved from "http://en.openei.org/w/index.php?title=ConSol_(Building_Industry_Research_Alliance)&oldid=379316

402

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS 27 data.

403

Industrial Decision Making  

E-Print Network (OSTI)

Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy although, freight costs, favorable exchange rates and high capacity utilization will encourage future industrial investment. Industry will eventually enter a new period of major investment. Future industrial investment will be an opportunity to influence the energy efficiency of these facilities for generations to come. Program managers must begin engaging industrial customers now, in order to exploit this unprecedented opportunity to change future energy use patterns. This paper reviews recent market trends and industrial investment decision-making. The paper will also address several important questions: Why has industrial investment declined? What is the outlook for industrial investment? How can programs engage industry for future opportunities?

Elliott, R. N.; McKinney, V.; Shipley, A.

2008-01-01T23:59:59.000Z

404

The Nuclear Fuel Industry Research Program Overview  

Science Conference Proceedings (OSTI)

This overview introduces the Nuclear Fuel Industry (NFIR) program to member utilities while also serving as a research status update for program participants. It includes detailed descriptions of various projects, relating both the technical backgrounds and the overall scope of work. NFIR program activities are geared toward providing long-term benefits to utilities and vendors by ensuring the safe and reliable use of core materials and components. Specific information can be obtained from published tech...

1994-08-23T23:59:59.000Z

405

Energy Efficiency Improvement and Cost Saving Opportunities for the Glass Industry. An ENERGY STAR Guide for Energy and Plant Managers  

Science Conference Proceedings (OSTI)

The U.S. glass industry is comprised of four primary industry segments--flat glass, container glass, specialty glass, and fiberglass--which together consume $1.6 billion in energy annually. On average, energy costs in the U.S. glass industry account for around 14 percent of total glass production costs. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There is a variety of opportunities available at individual plants in the U.S. glass industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, system, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. glass industry is provided along with a description of the major process steps in glass manufacturing. Expected savings in energy and energy-related costs are given for many energy efficiency measures, based on case study data from real-world applications in glass production facilities and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers in the U.S. glass industry reduce energy consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of the measures--as well on as their applicability to different production practices--is needed to assess potential implementation of selected technologies at individual plants.

Galitsky, Christina; Worrell, Ernst; Galitsky, Christina; Masanet, Eric; Graus, Wina

2008-03-01T23:59:59.000Z

406

Current and future industrial energy service characterizations  

DOE Green Energy (OSTI)

Current and future energy demands, end uses, and cost used to characterize typical applications and resultant services in the industrial sector of the United States and 15 selected states are examined. A review and evaluation of existing industrial energy data bases was undertaken to assess their potential for supporting SERI research on: (1) market suitability analysis, (2) market development, (3) end-use matching, (3) industrial applications case studies, and (4) identification of cost and performance goals for solar systems and typical information requirements for industrial energy end use. In reviewing existing industrial energy data bases, the level of detail, disaggregation, and primary sources of information were examined. The focus was on fuels and electric energy used for heat and power purchased by the manufacturing subsector and listed by 2-, 3-, and 4-digit SIC, primary fuel, and end use. Projections of state level energy prices to 1990 are developed using the energy intensity approach. The effects of federal and state industrial energy conservation programs on future industrial sector demands were assessed. Future end-use energy requirements were developed for each 4-digit SIC industry and were grouped as follows: (1) hot water, (2) steam (212 to 300/sup 0/F, each 100/sup 0/F interval from 300 to 1000/sup 0/F, and greater than 1000/sup 0/F), and (3) hot air (100/sup 0/F intervals). Volume I details the activities performed in this effort.

Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

1980-10-01T23:59:59.000Z

407

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

408

Industrial | Open Energy Information  

Open Energy Info (EERE)

to: navigation, search Click to return to AEO2011 page AEO2011 Data From AEO2011 report . Market Trends Despite a 54-percent increase in industrial shipments, industrial energy...

409

The Copper Industry  

Science Conference Proceedings (OSTI)

...These products are sold to a wide variety of industrial users. Certain mill products??chiefly wire, cable, and most

410

NIST Industry Day 2012  

Science Conference Proceedings (OSTI)

... at www.fedbizopps.gov. Search NIST-AMD-INDUSTRY-DAY-2012 in the Quick Search engine. Deadline for registration ...

2013-08-30T23:59:59.000Z

411

Industrial Development Projects (Montana)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation authorizes municipalities and counties to issue bonds or interest coupons to finance industrial projects, including energy generation facilities.

412

America's Booming Wind Industry  

Energy.gov (U.S. Department of Energy (DOE))

Sharing key findings from two new Energy Department reports that highlight the record growth of America's wind industry.

413

ENERGY STAR industrial partnership | ENERGY STAR Buildings & Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

ENERGY STAR industrial partnership ENERGY STAR industrial partnership Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In this section Get started with ENERGY STAR Make the business case Build an energy management program Measure, track, and benchmark Improve energy performance ENERGY STAR industrial partnership New ENERGY STAR industrial partners Energy guides Energy efficiency and air regulation

414

Property:File/Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name File/Description Property Type Text Description Description of the file's contents/purpose. Pages using the property "File/Description" Showing 25 pages using this property. (previous 25) (next 25) A Australia-Solar-Map.png + Average Daily Solar Exposure: Australia B BOEMRE OCS.oil.gas.2007-12.map.pdf + Outer Continental Shelf (OCS) Oil & Gas Leasing Program 2007 - 2012 BOEMRE US.CSB.Map.pdf + US Continental Shelf Boundary (CSB) Areas BOEMRE US.CSB.bathy.map.pdf + Outer Continental Shelf (OCS) Boundary Areas, in color BOEMRE atlantic.OCS.multiple.use.map.2003.pdf + Multiple Uses of the Atlantic Outer Continental Shelf BOEMRE lease.platforms.santa.barb.map.5.2010.pdf + Federal Leases in Pacific Ocean, near Santa Maria Basin

415

Transforming the Oil Industry into the Energy Industry  

E-Print Network (OSTI)

innovation and lets industry pick winning technologies. TheTransforming the Oil Industry intothe Energy Industry BY DANIEL SPERLING AND SONIA YEH A C C E

Sperling, Daniel; Yeh, Sonia

2009-01-01T23:59:59.000Z

416

From Industry Protection to Industry Promotion: IT Policy in Brazil  

E-Print Network (OSTI)

Brazilian banking automation industry. Science, TechnologyBrazilian liberalisation of the IT industry on technologicalWorking paper. Computer Industry Almanac, Inc. (1999).

Botelho, Antonio Jose Junqueira; Dedrick, Jason; Kraemer, Kenneth L.; Tigre, Paulo Bastos

1999-01-01T23:59:59.000Z

417

Business Case Slide 12: High-Volume: Casks - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Casks - Description Previous Slide Next Slide Table of Contents High-Volume: Casks - Description Description Use DUO2 to enhance the shielding efficiency in spent fuel casks for...

418

Property:WellFieldDescription | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Property Name WellFieldDescription Property Type String Description A description of the well field in the geothermal area This is a property...

419

Microsoft Word - 564M_Biomass_Project Descriptions FINAL 120409...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 More...

420

POSTER DESCRIPTION: Poster Title: "Distributed Electric Power...  

NLE Websites -- All DOE Office Websites (Extended Search)

DESCRIPTION: Poster Title: "Distributed Electric Power from Bio-based and Fossil Fuels" Entity: Technology Management, Inc. 9718 Lake Shore Blvd., Cleveland, Ohio 44108 Author(s):...

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Machinist Pipeline/Apprentice Program Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

422

Property:Wavemaking Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Wavemaking Description Property Type Text Pages using the property "Wavemaking Description" Showing 25 pages using this property. (previous 25) (next 25) A Alden Large Flume + Wave generators not yet designed Alden Small Flume + Period adjustable electronically, height adjustable mechanically Alden Wave Basin + Period adjustable electronically, height adjustable mechanically C Carderock Maneuvering & Seakeeping Basin + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions. Carderock Tow Tank 2 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions Carderock Tow Tank 3 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions.

423

Hydrothermal industrialization: direct heat development. Final report  

Science Conference Proceedings (OSTI)

A description of hydrothermal resources suitable for direct applications, their associated temperatures, geographic distribution and developable capacity are given. An overview of the hydrothermal direct-heat development infrastructure is presented. Development activity is highlighted by examining known and planned geothermal direct-use applications. Underlying assumptions and results for three studies conducted to determine direct-use market penetration of geothermal energy are discussed.

Not Available

1982-05-01T23:59:59.000Z

424

Role of fuel cells in industrial cogeneration  

SciTech Connect

During the early years (1958 to 1963), three types of fuel cells were under development: phosphoric acid (PAFC), molten carbonate (MCFC), and solid oxide (SOFC) fuel cells. Between 1963 and 1971, the IGT research and development effort concentrated on the phosphoric acid and molten carbonate technologies; since 1971, emphasis has been on the molten carbonate fuel cell. IGT believes MCFC is best suited to meet the goals of the electric industry and the requirements of industrial cogeneration. Through the years, IGT has conducted system studies to evaluate the role that each one of the three fuel cell types can play in industrial cogeneration. This paper briefly discusses the status of the three technologies, the potential industrial cogeneration market, the application of fuel cells to this market, and the potential fuel savings for several industrial categories.

Camara, E.H.

1985-01-01T23:59:59.000Z

425

MISR -- Solar and steam for industry  

SciTech Connect

The goal of the MISR project is to assist industry in developing viable Solar Energy Systems which have high reliability and low cost because they do not require custom engineering and installation for each industrial site. The collector field, piping and steam generation equipment are pre-engineered to be suitable for a wide range of industrial steam applications. The approach of the MISR project is twofold: to develop line-focus industrial solar thermal energy systems which, like conventional packaged steam boilers, are based on the modular concept; and to install and operate a number (10 or less) of these systems at existing industrial plants, supplementing steam produced by conventional boilers. The project is briefly described.

1981-12-31T23:59:59.000Z

426

Uranium industry annual 1998  

SciTech Connect

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

NONE

1999-04-22T23:59:59.000Z

427

Uranium industry annual 1994  

SciTech Connect

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

NONE

1995-07-05T23:59:59.000Z

428

Assessment of Industrial-Sector Load Shapes  

Science Conference Proceedings (OSTI)

The load shapes of industrial-sector customers are becoming increasingly important for utility forecasting, marketing, and demand-side management planning and evaluation activities. This report analyzes load shapes for various industry segments and investigates the transfer of these load shapes across service territories. This report is available only to funders of Program 101A or 101.001. Funders may download this report at http://my.primen.com/Applications/DE/Community/index.asp .

1993-02-18T23:59:59.000Z

429

Emplacement Drift System Description Document  

SciTech Connect

The Emplacement Drift System is part of the Engineered Barrier System and provides the interface between the various waste package (WP) systems and the Ground Control System. In conjunction with the various WPs, the Emplacement Drift System limits the release and transport of radionuclides from the WP to the Natural Barrier following waste emplacement. Collectively, the Emplacement Drift System consists of the structural support hardware (emplacement drift invert and WP emplacement pallet) and any performance-enhancing barriers (drip shields and invert ballast) installed or placed in the emplacement drifts. The Emplacement Drift System is entirely located within the emplacement drifts in the subsurface portion of the Monitored Geologic Repository (MGR); specifically, it is physically bounded by the Subsurface Facility System, the Ground Support System, and the Natural Barrier. The Emplacement Drift System supports the key MGR functions of limiting radionuclide release to the Natural Barrier, minimizing the likelihood of a criticality external to the WPs, limiting natural and induced environmental effects, and providing WP support. The Emplacement Drift System limits radionuclide release to the Natural Barrier by controlling the movement of radionuclides within the emplacement drift and to the Natural Barrier, and by limiting water contact with the WPs. The Emplacement Drift System provides physical support and barriers for emplaced WPs that reduce water contact. The Emplacement Drift WP spacing supports the thermal loading performance by complimenting drift layout and orientation as described in the system description document for the Subsurface Facility System. The Emplacement Drift System supports the WP and also provides an environment that aids in enhancing WP confinement performance. As part of the Engineered Barrier System, the Emplacement Drift System interfaces with the WP systems. The Emplacement Drift System also interfaces with the Natural Barrier, Subsurface Facility System, and Ground Control System for the space and location of emplaced WPs, for the controlled release of radionuclides, and for controlling the heat, chemical, and physical effects that interact between these systems. The Emplacement Drift System interfaces with the Subsurface Ventilation System for preclosure heat removal from WPs. The Emplacement Drift System interfaces with the Waste Emplacement/Retrieval System and the Performance Confirmation Emplacement Drift Monitoring System for equipment clearance for the emplacement, retrieval, and monitoring of waste.

Eric Loros

2001-07-31T23:59:59.000Z

430

PETSc: Applications  

NLE Websites -- All DOE Office Websites (Extended Search)

Applications and Publications Applications and Publications Home Download Features Documentation Applications/Publications Prizes Industrial/DOE sites DOE CSGF users Miscellaneous External Software Developers Site These are publications on application simulations developed by PETSc users. Please send us information about your publications, petsc-maint@mcs.anl.gov. How to cite PETSc in your publications. See Acknowledgments for software packages that PETSc uses. PETSc has been used for modeling in all of these areas: Acoustics, Aerodynamics, Air Pollution, Arterial Flow, Bone Fractures, Brain Surgery, Cancer Surgery, Cancer Treatment, Carbon Sequestration, Cardiology, Cells, CFD, Combustion, Concrete, Corrosion, Data Mining, Dentistry, Earth Quakes, Economics, Fission, Fusion, Glaciers, Ground Water Flow, Linguistics,

431

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Print Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

432

University of Maryland Chemistry GAANN Program Fellowship Application Packet Description  

E-Print Network (OSTI)

This year-long Fellowship is designed for Ph.D. candidates in chemistry, who intend to pursue a career in higher education. Fellows will normally complete this year-long program as post candidacy students during their 3rd or 4th years in the PhD program. The Fellowship carries with it an annual stipend of up to $30,000, tuition remission at a level of post candidacy tuition plus 2 credits per year, and health benefits. Each Fellow will receive an additional book/computer/travel allowance of up to $2500. This program involves a year-long supervised teaching experience, in which Fellows are individually mentored by outstanding teachers. Fellows obtain semester-long experiences in a traditional lecture-format, coursework in the pedagogy of Chemical Education (Chem 608k), and mentorship of an undergraduate student in the research laboratory. The expected time commitment is 8 hours/week. Minority students, women, and other underrepresented groups are particularly encouraged to apply. Eligibility

unknown authors

2013-01-01T23:59:59.000Z

433

Building application ontologies from descriptions of Semantic Web Services  

Science Conference Proceedings (OSTI)

The existence of an increasing number of different ontologies used in semantic web service fields raises numerous interoperation and communication problems with respect to service discovery, composition, and execution. Current approaches for ontology ... Keywords: Semantic Web Services, WSD algorithm, WordNet, ontology building, ontology merging

Xia Wang; Manfred Hauswirth; Tomas Vitvar; doug foxvog

2009-12-01T23:59:59.000Z

434

Gabor Transform Application in Feature Description of Underwater Echo Signal  

Science Conference Proceedings (OSTI)

For the nonstationarity of target echo signals acquired by laser underwater target detecting system and the relevance between target echo signal and noise, in virtue of texture analysis of image processing, Gabor transform is used to localize the target ...

Shubin Yang; Wanlong Cui; Huaxi Wang

2009-12-01T23:59:59.000Z

435

Atom Probe Tomography for Industrial Applications - Programmaster ...  

Science Conference Proceedings (OSTI)

Contributions of Atom Probe Tomography to the Understanding of Steels Control of p-n ... Relationships in a Series of Co-Cr-Cu-Fe-Ni-Al High Entropy Alloys.

436

Improving Industrial Refrigeration System Efficiency - Actual Applications  

E-Print Network (OSTI)

This paper discusses actual design and modifications for increased system efficiency and includes reduced chilled liquid flow during part load operation, reduced condensing and increased evaporator temperatures for reduced system head, thermosiphon cycle cooling during winter operation, compressor intercooling, direct refrigeration vs. brine cooling, insulation of cold piping to reduce heat gain, multiple screw compressors for improved part load operation, evaporative condensers for reduced system head and pumping energy, and using high efficiency motors.

White, T. L.

1980-01-01T23:59:59.000Z

437

Green Replacement for Industrial Applications of Polar ...  

The lower volatility can lead to more energy intensive separation of the solvent; however, this is something that should be considered when moving to this alternative.

438

Green Replacement for Industrial Applications of Vaccine ...  

This alternative eliminates the ... volatility can lead to more energy intensive separation of the solvent; however, this is something that should be

439

Insect oils: Nutritional and industrial applications  

Science Conference Proceedings (OSTI)

Many researchers have investigated wild plants as a new source of oils, but until now few have seriously considered insects. A recent analysis from Sudan indicates that insect oils offer several nutritional benefits and meet many of the specifications for

440

Combustion characterization of coals for industrial applications  

Science Conference Proceedings (OSTI)

The five parent coals ear-marked for this study have been characterized. These coals include (1) a Texas (Wilcox) lignite; (2) a Montana (Rosebud) subbituminous; (4) an Alabama (Black Creek) high volatile bituminous; and (5) a Pennsylvania (Buck Mountain) anthracite. Samples for analyses were prepared in accordance with the ASTM standard (ASTM D 2013-72). The following ASTM analyses were performed on each coal: proximate, ultimate, higher heating value, Hardgrove grindability index, ash fusibility, and ash composition. Additionally, the flammability index (FI) of each coal was determined in an in-house apparatus. The FI is indicative of the ignition temperature of a given fuel on a relative basis. The combustion kinetic parameters (apparent activation energies and frequency factors) of Montana subbituminous and Pennsylvania anthracite chars have also been derived from data obtained in the Drop Tube Furnace System (DTFS). This information depicts the combustion characteristics of these two coal chars. 1 ref., 5 figs., 4 tabs.

Nsakala, N.; Patel, R.L.; Lao, T.C.

1982-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Commercial/industrial applications spur solar development  

SciTech Connect

Several large commercial buildings with solar systems are examined. The first building mentioned is the La Quinta Motor Inn located in Dallas, Texas. The system supplies approximately 90% of the hot water for the rooms and laundry. The largest solar cooling system is located in Frenchman's Reef, the Holiday Inn, St. Thomas, Virgin Islands. The system was funded by a 75% grant from the Energy Research and Development Administration. In Decatur, Alabama, construction has begun on a solar heating system that will be used at a large soybean oil extraction facility. The project is also sponsored in part by ERDA. The solar panels will be used to air dry the soy beans. The largest solar-powered irrigation system is located in Gila River Ranch southwest of Phoenix, Arizona. The system includes a 50-hp pump capable of delivering up to 10,000 gallons of irrigation water per minute. It operates with 5,500 ft/sup 2/ of parabolic tracking collectors.

Comstock, W.S.

1977-11-01T23:59:59.000Z

442

Industrial Application of Friction Stir Processing  

Science Conference Proceedings (OSTI)

Modern equipment manufacturers for FSW/FSP are presented. Proceedings ... Dry Sliding Wear Behavior of Al 6061- 3% TiB2 In Situ Alloy Composite Processed through Cryorolling ... Mechanical Behaviour of Ultrafine Grained Zircaloy-2.

443

Industrial type gas turbines for offshore applications  

SciTech Connect

The paper discusses, with reference to the power generating gas turbines on the FRIGG TCP-2 platform, the specific and general requirements for offshore gas turbine, and how those sometimes conflicting requirements are met. Furthermore, interesting details of the particular installation on the FRIGG TCP-2 platform are described. The gas turbines on the FRIGG TCP-2 platform are the first ones to be installed in Norwegian water after the Norwegian regulations for ''Production and auxiliary systems on production installations, etc.'' were officially issued in April 1978. Some of these special regulations and their influence on the gas turbine design are discussed. Paper No. 79-GT-105.

Elmhed, G.; Ferm, S.; Svensson, S.O.

1980-04-01T23:59:59.000Z

444

Industrial applications of photonuclear resonance excitation  

E-Print Network (OSTI)

Photonuclear resonance excitation refers to a variety of photonuclear interaction processes that lead to the excitation of a nucleus from some initial state to a higher energy nuclear state. Typical excited nuclear state ...

Chichester, David Lee, 1971-

2000-01-01T23:59:59.000Z

445

Tobacco Industry Involvement in Colorado  

E-Print Network (OSTI)

Accessed May 25, 2004) Industry Summary. 1992 (est. ).11 May 2004) Tobacco Industry Involvement in Colorado Pageor (800) LUNG-USA. Tobacco Industry Involvement in Colorado

Landman, BA, Anne; Bialick, Peter

2004-01-01T23:59:59.000Z

446

For Industry | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

R&D accelerates battery technology | More news Home | Connect with ORNL | For Industry For Industry | For Industry SHARE There are a few different way of "working" with...

447

Industrial Energy Efficiency in Ukraine: The Business Outlook  

E-Print Network (OSTI)

Ukraine is full of profitable opportunities for energy efficiency. Industry accounts for many of these opportunities because of its high level of energy consumption and its ability to pay for energy efficiency measures in hard currency. This paper provides an overview of steps which companies can take to tap into the Ukrainian energy efficiency market, as well as a description of a sample energy efficiency opportunity at a Ukrainian industrial enterprise.

Evans, M.

1996-04-01T23:59:59.000Z

448

Recovery, reuse, and recycle of industrial waste  

SciTech Connect

The major goal of this work is to produce a document useful in planning efforts aimed at elimination of industrial wastes through the application of recycle, recovery, and reuse technology. The pollutants considered in this study are basically organic and inorganic by-products from wastewater effluents, solid residue and gaseous emissions from industrial operations. The first section contains chapters on methodology currently available for recovery of industrial and hazardous waste, and developing technology for recycle, reuse and recovery. The second section contains chapters on 5 technical categories, used for recovery namely, sorption, molecular separation, phase transition, chemical modification, and physical dispersion and separation.

Noll, K.E.; Haas, C.N.; Schmidt, C.; Kodukula, P.

1983-11-01T23:59:59.000Z

449

Industrial Utilization of Coal-Oil Mixtures  

E-Print Network (OSTI)

Coal-oil mixtures (COM) are receiving increasing interest as economical alternatives to residual fuel oil and natural gas used in heavy industrial and utility applications. Four basic approaches are currently employed in the manufacture of COM:. Economics and details of industrial conversion to COM are discussed. CoaLiquid, Inc. of Louisville, KY, which uses ultrasonic emulsification to stabilize the cm:, has been a leader in commercial demonstration in industrial equipment. Some of these demonstrations are discussed, along with implications for the future use of COM.

Dunn, J. E.; Hawkins, G. T.

1982-01-01T23:59:59.000Z

450

Anaerobic digestion of industrial activated aerobic sludge  

Science Conference Proceedings (OSTI)

The Tennessee Eastman Company manufactures a variety of organic chemicals, plastics and fibers at their Kingsport Tennessee Facility. The wastewater generated during the manufacture of these compounds is currently treated using an activated sludge process. The objective of the project is to evaluate the economic potential of an anaerobic digestion process to convert industrial sludge at the Tennessee Eastman Company into biogas. The evaluation will require collection and analysis of experimental data on the anaerobic digestion of industrial sludge obtained from Kingsport. Although the experiments will be conducted using Tennessee Eastman sludge, these results should be also generally applicable to similar industrial sludge.

Goodloe, J.G.; Roberts, R.S.

1990-04-01T23:59:59.000Z

451

Extending soft sets with description logics  

Science Conference Proceedings (OSTI)

Molodtsov initiated the concept of soft set theory, which can be used as a generic mathematical tool for dealing with uncertainty. Description Logics (DLs) are a family of knowledge representation languages which can be used to represent the terminological ... Keywords: Description logics, Extended soft sets, Soft sets, Terminology

Yuncheng Jiang; Yong Tang; Qimai Chen; Ju Wang; Suqin Tang

2010-03-01T23:59:59.000Z

452

PIA - Industry Interactive Procurement System (IIPS) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industry Interactive Procurement System (IIPS) PIA - Industry Interactive Procurement System (IIPS) PIA - Industry Interactive Procurement System (IIPS) PIA - Industry Interactive...

453

Thireenth international conference on cyclotrons and their applications  

SciTech Connect

This report contains short descriptions of papers presented at the Thirteenth International Conference on Cyclotrons and Their Applications.

Clark, D.J.

1992-07-01T23:59:59.000Z

454

Thireenth international conference on cyclotrons and their applications. Conference summary  

SciTech Connect

This report contains short descriptions of papers presented at the Thirteenth International Conference on Cyclotrons and Their Applications.

Clark, D.J.

1992-07-01T23:59:59.000Z

455

Photovoltaic industry progress through 1984  

DOE Green Energy (OSTI)

The growth of the US photovoltaics (PV) industry over the past decade has been impressive. First designed to provide power for satellites using high-cost production techniques, PV is now the economical choice in many remote terrestrial applications. The remarkable growth of PV in terms of quality of cells and modules, production techniques, and system design, was initiated by a cooperative effort of the US Government and the domestic PV manufacturers. European and Japanese firms entered the PV industry later, but are also growing rapidy. The Europeans continue to supply PV systems for village electrification and water pumping to many Third World countries. The Japanese have been developing the amorphous silicon (A-Si) technology by expanding its use in consumer goods. The world PV industry saw dramatic changes in industry ownership and in the emphasis on developing new and improved technology during 1984. The objective of this report is to present information on the developments of the world PV industry and focuses on developments occurring in 1984. Information is presented on a regional basis (US, Europe, Japan, other) to avoid disclosing company-confidential data. All information was gleaned from several sources, including a review of the technical literature and direct contacts with PV manufacturers. Prior to publishing the regional totals, all numbers were compared with those of other sources. The information contained in this report is prepared for use by the Department of Energy for their use in long-term R and D planning. However, this information should also be of interest by PV manufacturers and to those who may be contemplating entering the PV market. PV shipments for 1984, government supports for PV, and various PV market sectors are discussed.

Watts, R.L.; Smith, S.A.; Dirks, J.A.

1985-04-01T23:59:59.000Z

456

Biomass energy conversion workshop for industrial executives  

DOE Green Energy (OSTI)

The rising costs of energy and the risks of uncertain energy supplies are increasingly familiar problems in industry. Bottom line profits and even the simple ability to operate can be affected by spiralling energy costs. An often overlooked alternative is the potential to turn industrial waste or residue into an energy source. On April 9 and 10, 1979, in Claremont, California, the Solar Energy Research Institute (SERI), the California Energy Commission (CEC), and the Western Solar Utilization Network (WSUN) held a workshop which provided industrial managers with current information on using residues and wastes as industrial energy sources. Successful industrial experiences were described by managers from the food processing and forest product industries, and direct combustion and low-Btu gasification equipment was described in detail. These speakers' presentations are contained in this document. Some major conclusions of the conference were: numerous current industrial applications of wastes and residues as fuels are economic and reliable; off-the-shelf technologies exist for converting biomass wastes and residues to energy; a variety of financial (tax credits) and institutional (PUC rate structures) incentives can help make these waste-to-energy projects more attractive to industry. However, many of these incentives are still being developed and their precise impact must be evaluated on a case-by-case basis.

None

1979-01-01T23:59:59.000Z

457

Scanning probe microscopy in the superconductor industry  

SciTech Connect

High-temperature superconductivity and scanning probe microscopy (SPM) have much in common. Both revolutionized their scientific fields and earned Nobel prizes for the original researchers. Both represent small-scale table-top research. Finally, both have emerged from research laboratories into growing industries. Applications of scanning probe microscopy to the superconductor industry range from the straightforward to the exotic. The superior three-dimensional resolution of scanning probe microscopes makes them ideal for routine topographic imaging and profilometry of substrates and thin films. On the other hand, the more esoteric applications of SPM include spectroscopic investigations of various electromagnetic properties of superconductors above and below the critical temperature.

Howland, R.S.; Kirk, M.D. (Park Scientific Instruments (US))

1991-01-01T23:59:59.000Z

458

Applicant Organization:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Range Fuels, Inc. Range Fuels, Inc. (formerly Kergy, Inc.) Corporate HQ: Broomfield, CO Proposed Facility Location: Near Soperton, Treutlen County, Georgia Description: This venture has developed a promising thermo-chemical conversion process, whose success could expand the range of feedstocks available for ethanol production. CEO or Equivalent: Mitch Mandich Participants: Merrick and Company, PRAJ Industries Ltd., Western Research Institute, Georgia Forestry Commission, Yeomans Wood and Timber; Truetlen County Development Authority; BioConversion Technology; Khosla Ventures; CH2MHill, Gillis Ag and Timber Production: * 10 million gallons/year from first unit; ~40 million gallons/year of ethanol and about 9 million gallons/year of methanol from commercial unit

459

A range description for the planar circular Radon transform  

E-Print Network (OSTI)

The transform considered in the paper integrates a function supported in the unit disk on the plane over all circles centered at the boundary of this disk. Such circular Radon transform arises in several contemporary imaging techniques, as well as in other applications. As it is common for transforms of Radon type, its range has infinite co-dimension in standard function spaces. Range descriptions for such transforms are known to be very important for computed tomography, for instance when dealing with incomplete data, error correction, and other issues. A complete range description for the circular Radon transform is obtained. Range conditions include the recently found set of moment type conditions, which happens to be incomplete, as well as the rest of conditions that have less standard form. In order to explain the procedure better, a similar (non-standard) treatment of the range conditions is described first for the usual Radon transform on the plane.

Gaik Ambartsoumian; Peter Kuchment

2005-08-04T23:59:59.000Z

460

Jefferson Lab Science Series - Understanding Flight: A Physical Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Physics of Stock Car Racing Physics of Stock Car Racing Previous Video (The Physics of Stock Car Racing) Science Series Video Archive Next Video (The Hidden World of Technology) The Hidden World of Technology Understanding Flight: A Physical Description of How Airplanes Fly Dr. Scott Eberhardt - University of Washington March 23, 2004 Did you ever wonder how a Boeing 747, weighing 910,000 lbs at takeoff can possibly get off the ground? Or, did you ever wonder how airplanes fly upside down? Why is there a "backside of the power curve?" What makes a wing efficient? These questions can be answered when lift is developed in terms of Newton's laws. A Newtonian description of lift gives an intuitive feel for how airplanes fly, without the need for complicated analysis or approximations. Through the application of Newton's three laws, we will

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Active transport: A kinetic description based on thermodynamic grounds  

E-Print Network (OSTI)

We show that active transport processes in biological systems can be understood through a local equilibrium description formulated at the mesoscale, the scale to describe stochastic processes. This new approach uses the method established by nonequilibrium thermodynamics to account for the irreversible processes occurring at this scale and provides nonlinear kinetic equations for the rates in terms of the driving forces. The results show that the application domain of nonequilibrium thermodynamics method to biological systems goes beyond the linear domain. A model for transport of Ca$^{2+}$ by the Ca$^{2+}$-ATPase, coupled to the hydrolysis of adenosine-triphosphate is analyzed in detail showing that it depends on the reaction Gibbs energy in a non-linear way. Our results unify thermodynamic and kinetic descriptions, thereby opening new perspectives in the study of different transport phenomena in biological systems.

S. Kjelstrup; J. M. Rubi; D. Bedeaux

2004-12-17T23:59:59.000Z

462

Industrial Energy Efficiency Assessments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Energy Efficiency Assessments Lynn Price Staff Scientist China Energy Group Energy Analysis Department Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Industrial Energy Efficiency Assessments - Definition and overview of key components - International experience - Chinese situation and recommendations - US-China collaboration Industrial Energy Efficiency Assessments - Analysis of the use of energy and potential for energy efficiency in an industrial facility * Current situation * Recommendations for improving energy efficiency * Cost-benefit analysis of recommended options * An action plan for realizing potential savings Types of Industrial Energy Efficiency Assessments - Preliminary or walk-through - Detailed or diagnostic Audit criteria

463

Industrial Partnerships Office  

Industrial Partnerships Office 6/13 Richard Rankin Director----Roger Werne Deputy Director-----Yvonne King Administrator Nina Potter Manager Intellectual Property

464

Industrial Waste Generation  

NLE Websites -- All DOE Office Websites (Extended Search)

9) Page 2 of 7 Industrial Waste Generation Work with Engineered Nanomaterials Power Consumption Historical Contamination (groundwater, soil) Hazardous Waste Generation Atmospheric...

465

Search - Industrial Partnerships Office  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore ...

466

Construction Industry Software  

Science Conference Proceedings (OSTI)

... Translates a CIS/2 (CIMsteel Integration Standards) file into a 3D interactive VRML model of a steel structure or an IFC (Industry Foundation Classes ...

2012-04-23T23:59:59.000Z

467

Technologies - Industrial Partnerships Office  

Energy, Utilities, & Power Systems. Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988

468

OpenEI - Industrial  

Open Energy Info (EERE)

renewable energy consumption (in quadrillion btu) for electricity generation in the United States by energy use sector (commercial, industrial and electric power) and by...

469

Photovoltaic industry manufacturing technology. Final report  

DOE Green Energy (OSTI)

This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

1998-08-01T23:59:59.000Z

470

Methods in Industrial Biotechnology for Chemical Engineers  

E-Print Network (OSTI)

In keeping with the definition that biotechnology is really no more than a name given to a set of techniques and processes, the authors apply some set of fuzzy techniques to chemical industry problems such as finding the proper proportion of raw mix to control pollution, to study flow rates, to find out the better quality of products. We use fuzzy control theory, fuzzy neural networks, fuzzy relational equations, genetic algorithms to these problems for solutions. When the solution to the problem can have certain concepts or attributes as indeterminate, the only model that can tackle such a situation is the neutrosophic model. The authors have also used these models in this book to study the use of biotechnology in chemical industries. This book has six chapters. First chapter gives a brief description of biotechnology. Second chapter deals will proper proportion of mix of raw materials in cement industries to minimize pollution using fuzzy control theory. Chapter three gives the method of determination of temperature set point for crude oil in oil refineries. Chapter four studies the flow rates in chemical industries using fuzzy neutral networks. Chapter five gives the method of minimization of waste gas flow in chemical industries using fuzzy linear programming. The final chapter suggests when in these studies indeterminancy is an attribute or concept involved, the notion of neutrosophic methods can be adopted.

W. B. Vasantha Kandasamy; Florentin Smarandache

2008-07-13T23:59:59.000Z

471

A SUMMARY OF INDUSTRIAL ACCIDENTS IN USAEC FACILITIES  

SciTech Connect

The summary includes descriptions of serious accidents for l959 and 1960, AEC industrial injury frequency rates, criticality accidents, radiation exposures, accidents involving radioactive materials in AEC activities during 1959 and 1960, and accidents involving fatalities in AEC activities during l959 and 1960. (B.O.G.)

1961-12-01T23:59:59.000Z

472

Energy conservation in the textile industry: 10 case histories  

DOE Green Energy (OSTI)

Presented are ten case studies of energy conserving technologies that have been implemented by the textile industry. For each case is given: the name and location of the plant and an employee contact, description of products, energy consumption and costs in years before and after the energy conserving technology was implemented, energy savings since the energy conserving technology was implemented, description of investment decision-making process, and description of any institutional and environmental considerations. Measures included are: tandem preparation line, dyebath reuse, bump-and-run (dyebath temperature drifts for the last 85% of the hold time), foam finishing, wastewater heat recovery, wastewater chlorination and reuse, oven exhaust air counterflow, boiler economizer, wood-fired boiler, and solar industrial process heat. Several other energy conserving technologies that were not studied are briefly summarized. (LEW)

Not Available

473

Recent developments: Industry briefs  

SciTech Connect

This article is the `Industry Briefs` portion of the March 1992 `Recent Developments` section of Nuexco. Specific issues mentioned are: (1) closure of Yankee Rowe, (2) steam-generator tube plugging at Trojan, (3) laser enrichment in South Africa, (4) the US uranium industry, (5) planning for two nuclear units in Taiwan, and (6) the establishment of a Czech/French joint venture.

NONE

1992-03-01T23:59:59.000Z

474

Geothermal industry assessment  

DOE Green Energy (OSTI)

An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

Not Available

1980-07-01T23:59:59.000Z

475

PARS II Course Descriptions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptions Descriptions PARS II Course Descriptions Sign up for PARS 102 or PARS 103, depending on your project assessment role and function. PARS 104 will be offered to site contractors as part of Dekker's Contractor deployment training. # Course Name Course Description Intended Audience PARS 102 Monthly Updating and Reporting Duration: 4 hrs Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. Individuals who do not require monthly update training will be excused approximately one half hour early. FPD and Program staff who update the OA Monthly Status, but not other OA data.

476

Individual Reuse in Description Logic Reasoning  

Science Conference Proceedings (OSTI)

Tableau calculi are the state-of-the-art for reasoning in description logics (DL). Despite recent improvements, tableau-based reasoners still cannot process certain knowledge bases (KBs), mainly because they end up building very large models. To address ...

Boris Motik; Ian Horrocks

2008-08-01T23:59:59.000Z

477

Concise descriptions of subsets of structured sets  

Science Conference Proceedings (OSTI)

We study the problem of economical representation of subsets of structured sets, that is, sets equipped with a set cover. Given a structured set U, and a language L whose expressions define subsets of U, the problem of Minimum Description ...

Alberto O. Mendelzon; Ken Q. Pu

2003-06-01T23:59:59.000Z

478

Qualitatitive description : light in the urban environment  

E-Print Network (OSTI)

The quality of our built environment is difficult to describe and to regulate; using light as an example, this thesis develops a descriptive framework using elementary, dynamic and connective forms. The combination of these ...

Stuebing, Susan

1986-01-01T23:59:59.000Z

479

VEHICLE DETAILS, BATTERY DESCRIPTION AND SPECIFICATIONS Vehicle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 VEHICLE DETAILS, BATTERY DESCRIPTION AND SPECIFICATIONS Vehicle Details Base Vehicle: 2011 Nissan Leaf VIN: JN1AZ0CP5BT000356 Propulsion System: BEV Electric Machine: 80 kW...

480

EMERGENCY RESPONSE ORGANIZATION TRAINING PROGRAM DESCRIPTION  

SciTech Connect

This document establishes requirements for Emergency Response Organization Training. This program description applies to all Project Hanford Management Contract (PHMC) contractor and subcontractor employees who are identified to fulfill Hanford Site Emergency Response Organization (ERO) positions.

MITCHELL, L.J.

2001-06-20T23:59:59.000Z

Note: This page contains sample records for the topic "industrial description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

CALIPSO Lidar Description and Performance Assessment  

Science Conference Proceedings (OSTI)

This paper provides background material for a collection of CloudAerosol Lidar with Orthogonal Polarization (CALIOP) algorithm papers that are to be published in the Journal of Atmospheric and Oceanic Technology. It provides a brief description ...

William H. Hunt; David M. Winker; Mark A. Vaughan; Kathleen A. Powell; Patricia L. Lucker; Carl Weimer

2009-07-01T23:59:59.000Z

482

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry and Neutron Science Industry and Neutron Science Industry and Neutron Science: Working To Make a Match "In fundamental research, we want to know everything. Industry wants to know enough to answer a question." Research Contact: Mike Crawford September 2011, Written by Deborah Counce Mike Crawford and Souleymane Diallo Mike Crawford of Dupont (right) and Souleymane Diallo, instrument scientist for the Backscattering Spectrometer at SNS, prepare a material sample for an experiment on the instrument. Industrial users are starting to eye the potential of neutron science for solving problems that can't be solved in any other way. At the same time, the SNS and HFIR neutron science facilities at ORNL are exploring ways to woo such users and to make a match of it, to the benefit of both.

483

Uranium industry annual 1996  

SciTech Connect

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

NONE

1997-04-01T23:59:59.000Z

484

On-line Monitoring [Laser Applications Laboratory] - Nuclear Engineering  

NLE Websites -- All DOE Office Websites (Extended Search)

On-line Monitoring On-line Monitoring Capabilities Engineering Experimentation Reactor Safety Experimentation Aerosol Experiments System Components Laser Applications Overview Laser Oil & Gas Well Drilling Laser Heat Treatment Laser Welding of Metals On-line Monitoring Laser Beam Delivery Laser Glazing of Railroad Rails High Power Laser Beam Delivery Decontamination and Decommissioning Refractory Alloy Welding Robots Applications Other Facilities Other Capabilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Laser Applications Laboratory On-line Monitoring Project description: On-line process monitoring for laser-beam welding. Category: Project with industrial partner (USCAR) Bookmark and Share Simulated defects and associated responses from a weld sensor developed at Argonne

485

Uranium industry annual 1995  

SciTech Connect

The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

NONE

1996-05-01T23:59:59.000Z

486

Energy Efficiency Improvement and Cost Saving Opportunities for the Pharmaceutical Industry. An ENERGY STAR Guide for Energy and Plant Managers  

SciTech Connect

The U.S. pharmaceutical industry consumes almost $1 billion in energy annually. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. pharmaceutical industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy efficient technologies that can be implemented at the component, process, system, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. pharmaceutical industry is provided along with a description of the major process steps in the pharmaceutical manufacturing process. Expected savings in energy and energy-related costs are given for many energy efficiency measures, based on case study data from real-world applications in pharmaceutical and related facilities worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers reduce energy consumption in a cost-effective manner while meeting regulatory requirements and maintaining the quality of products manufactured. At individual plants, further research on the economics of the measures?as well as their applicability to different production practices?is needed to assess potential implementation of selected technologies.

Galitsky, Christina; Galitsky, Christina; Chang, Sheng-chieh; Worrell, Ernst; Masanet, Eric

2008-03-01T23:59:59.000Z

487

Role of fuel cells in industrial cogeneration  

Science Conference Proceedings (OSTI)

Work at the Institute of Gas Technology on fuel cell technology for commercial application has focused on phosphoric acid (PAFC), molten carbonate (MCFC), and solid oxide (SOFC) fuel cells. The author describes the status of the three technologies, and concludes that the MCFC in particular can efficiently supply energy in industrial cogeneration applications. The four largest industrial markets are primary metals, chemicals, food, and wood products, which collectively represent a potential market of 1000 to 1500 MEe annual additions. At $700 to $900/kW, fuel cells can successfully compete with other advanced systems. An increase in research and development support would be in the best interest of industry and the nation. 1 reference, 5 figures, 5 tables.

Camara, E.H.

1985-08-01T23:59:59.000Z

488

Recovery, recycle and reuse of industrial wastes  

Science Conference Proceedings (OSTI)

This book discusses the elimination of industrial wastes through the application of recycle, recovery and reuse technology. An overview is provided of how various processes can recover potential contaminants for eventual reuse. Chapters include resource recovery from hazardous waste, sorption, molecular separation, phase transition, chemical modifications, physical dispersion and separation.

Noll, K.E.; Haas, C.N.; Schmidt, C.; Kodukula, P.

1985-01-01T23:59:59.000Z

489

Energy Conservation in China North Industries Corporation  

E-Print Network (OSTI)

This paper describes an overview of the energy conservation in China North Industries Corporation. It shows how the corporation improves energy efficiencies and how it changes constitution of fuel--converting oil consumption to coal. Energy management organization, energy balance in plants and several specific techniques such as Heat pipe application, Coal oil mixture, Coal water slurry are also mentioned in this paper.

You, W. T.

1985-05-01T23:59:59.000Z

490

Solar energy industry survey  

SciTech Connect

This report describes the results of a survey of companies in the solar energy industry. The general objective of the survey was to provide information to help evaluate the effectiveness of technology transfer mechanisms for the development of the solar industry. The specific objectives of the survey included: (1) determination of the needs of the solar industry; (2) identification of special concerns of the solar industry; and (3) determination of the types of technology transfer mechanisms that would be most helpful to the solar industry in addressing these needs and concerns. The major focus was on technical problems and developments, but institutional and marketing considerations were also treated. The majority of the sample was devoted to the solar heating and cooling (SHAC) component of the industry. However, a small number of photovoltaic (PV), wind, and power generation system manufacturers were also surveyed. Part I discusses the methodology used in the selection, performance, and data reduction stages of the survey, comments on the nature of the responses, and describes the conclusions drawn from the survey. The latter include both general conclusions concerning the entire solar industry, and specific conclusions concerning component groups, such as manufacturers, architects, installers, or dealers. Part II consists of tabulated responses and non-attributed verbatim comments that summarize and illustrate the survey results.

1979-08-06T23:59:59.000Z

491

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W. (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

1998-01-01T23:59:59.000Z

492

Industrial Process Surveillance System  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)