Sample records for industrial classification system

  1. North American Industry Classification System (NAICS) Search Tool

    Broader source: Energy.gov [DOE]

    The North American Industry Classification System (NAICS) is the standard used by Federal statistical agencies in classifying business establishments for the purpose of collecting, analyzing, and...

  2. Standard Subject Classification System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1979-08-14T23:59:59.000Z

    The order establishes the DOE Standard Subject Classification System for classifying documents and records by subject, including correspondence, directives, and forms.Cancels DOE O 0000.1.

  3. Seismic event classification system

    DOE Patents [OSTI]

    Dowla, Farid U. (Castro Valley, CA); Jarpe, Stephen P. (Brentwood, CA); Maurer, William (Livermore, CA)

    1994-01-01T23:59:59.000Z

    In the computer interpretation of seismic data, the critical first step is to identify the general class of an unknown event. For example, the classification might be: teleseismic, regional, local, vehicular, or noise. Self-organizing neural networks (SONNs) can be used for classifying such events. Both Kohonen and Adaptive Resonance Theory (ART) SONNs are useful for this purpose. Given the detection of a seismic event and the corresponding signal, computation is made of: the time-frequency distribution, its binary representation, and finally a shift-invariant representation, which is the magnitude of the two-dimensional Fourier transform (2-D FFT) of the binary time-frequency distribution. This pre-processed input is fed into the SONNs. These neural networks are able to group events that look similar. The ART SONN has an advantage in classifying the event because the types of cluster groups do not need to be pre-defined. The results from the SONNs together with an expert seismologist's classification are then used to derive event classification probabilities.

  4. Seismic event classification system

    DOE Patents [OSTI]

    Dowla, F.U.; Jarpe, S.P.; Maurer, W.

    1994-12-13T23:59:59.000Z

    In the computer interpretation of seismic data, the critical first step is to identify the general class of an unknown event. For example, the classification might be: teleseismic, regional, local, vehicular, or noise. Self-organizing neural networks (SONNs) can be used for classifying such events. Both Kohonen and Adaptive Resonance Theory (ART) SONNs are useful for this purpose. Given the detection of a seismic event and the corresponding signal, computation is made of: the time-frequency distribution, its binary representation, and finally a shift-invariant representation, which is the magnitude of the two-dimensional Fourier transform (2-D FFT) of the binary time-frequency distribution. This pre-processed input is fed into the SONNs. These neural networks are able to group events that look similar. The ART SONN has an advantage in classifying the event because the types of cluster groups do not need to be pre-defined. The results from the SONNs together with an expert seismologist's classification are then used to derive event classification probabilities. 21 figures.

  5. Complex System Classification

    E-Print Network [OSTI]

    Magee, Christopher

    2004-07-24T23:59:59.000Z

    The use of terms such as “Engineering Systems”, “System of systems” and others have been coming into greater use over the past decade to denote systems of importance but with implied higher complexity than for the term ...

  6. Common occupational classification system - revision 3

    SciTech Connect (OSTI)

    Stahlman, E.J.; Lewis, R.E.

    1996-05-01T23:59:59.000Z

    Workforce planning has become an increasing concern within the DOE community as the Office of Environmental Restoration and Waste Management (ER/WM or EM) seeks to consolidate and refocus its activities and the Office of Defense Programs (DP) closes production sites. Attempts to manage the growth and skills mix of the EM workforce while retaining the critical skills of the DP workforce have been difficult due to the lack of a consistent set of occupational titles and definitions across the complex. Two reasons for this difficulty may be cited. First, classification systems commonly used in industry often fail to cover in sufficient depth the unique demands of DOE`s nuclear energy and research community. Second, the government practice of contracting the operation of government facilities to the private sector has introduced numerous contractor-specific classification schemes to the DOE complex. As a result, sites/contractors report their workforce needs using unique classification systems. It becomes difficult, therefore, to roll these data up to the national level necessary to support strategic planning and analysis. The Common Occupational Classification System (COCS) is designed to overcome these workforce planning barriers. The COCS is based on earlier workforce planning activities and the input of technical, workforce planning, and human resource managers from across the DOE complex. It provides a set of mutually-exclusive occupation titles and definitions that cover the broad range of activities present in the DOE complex. The COCS is not a required record-keeping or data management guide. Neither is it intended to replace contractor/DOE-specific classification systems. Instead, the system provides a consistent, high- level, functional structure of occupations to which contractors can crosswalk (map) their job titles.

  7. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  8. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

  9. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

    1998-06-09T23:59:59.000Z

    A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

  10. Genetic classification of petroleum systems

    SciTech Connect (OSTI)

    Demaison, G. (Stanford Univ., CA (United States)); Huizinga, B.J. (Chevron Overseas Petroleum Inc., San Ramon, CA (United States))

    1991-10-01T23:59:59.000Z

    The authors classification so petroleum systems is founded on a simple working nomenclature that consists of combining qualifiers from each of the following three categories: (1) charge factor, (2) migration drainage style, and (3) entrapment style. The charge factor is estimated on the basis of the richness and volumetrics of mature source rocks. The source potential index (SPI), which combines source-rock richness and thickness into a single parameter, is a convenient shortcut for comparing the petroleum potential of diverse source rocks containing dissimilar kerogen types and for rapidly estimating regional charging capacity. The migration drainage style is determined from the structural and stratigraphic framework of a basin. Vertical-migration drainage, which occurs mainly through faults and fracture systems breaching a seal, is characteristic of petroleum systems contained within rift basins, deltaic sequences, salt-dome provinces, wrench basins, and fold-and-thrust belts. In contrast, lateral-migration drainage sequences, salt-dome provinces, wrench basins, and fold-and-thrust belts. In contrast, lateral-migration drainage is dominant wherever stratigraphically continuous seal-reservoir doublets extend over a very large area in tectonically stable province. The entrapment style, which is also dependent on the structural framework and the presence and effectiveness of seals, describes the degree of resistance working against dispersion of the petroleum charge. Application of these working concepts should help to significantly reduce geologic risk, particularly in news ventures-type exploration.

  11. INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles of physical and human resources. These engineers are involved in developing manufacturing systems to help companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited

  12. Discriminant forest classification method and system

    DOE Patents [OSTI]

    Chen, Barry Y.; Hanley, William G.; Lemmond, Tracy D.; Hiller, Lawrence J.; Knapp, David A.; Mugge, Marshall J.

    2012-11-06T23:59:59.000Z

    A hybrid machine learning methodology and system for classification that combines classical random forest (RF) methodology with discriminant analysis (DA) techniques to provide enhanced classification capability. A DA technique which uses feature measurements of an object to predict its class membership, such as linear discriminant analysis (LDA) or Andersen-Bahadur linear discriminant technique (AB), is used to split the data at each node in each of its classification trees to train and grow the trees and the forest. When training is finished, a set of n DA-based decision trees of a discriminant forest is produced for use in predicting the classification of new samples of unknown class.

  13. Deaerators in Industrial Steam Systems

    SciTech Connect (OSTI)

    Not Available

    2006-01-01T23:59:59.000Z

    This revised ITP tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  14. Engineering Industrial & Systems

    E-Print Network [OSTI]

    Berdichevsky, Victor

    powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I the skills necessary to be successful in today's global environment. EDGE exposes and trains engineering

  15. A framework for a coarse aggregate classification system

    E-Print Network [OSTI]

    Peapully, Srikrishna

    1994-01-01T23:59:59.000Z

    System 1 . 4 . . 5 . . 6 II OVERVIEW OF EXISTING CLASSIFICATION SYSTEMS . . . . 8 8 14 Soil Classification Systems Rock Classification Systems Previous Efforts in Developing an Aggregate Classification System... for Rocks . . 19 3. 1 Characterization of Aggregate Shape Based on Form Factor Proposed by Folk . . . . . . . . . . . . . . . 40 3. 2 Four Shape Categories as Described by Zingg . . 41 3. 3 Surface Texture Characterization Proposed by Kummer . . 42 4. 1...

  16. Genetic classification of petroleum systems

    SciTech Connect (OSTI)

    Huizinga, B.J. (Chevron Oil Field Research Co., Richmond, CA (United States)); Demaison, G.

    1991-03-01T23:59:59.000Z

    The authors genetic classification of petroleum basins is founded on a working nomenclature that consists of combining qualifiers from each of the following three categories: (1) the charge factor (supercharged, normally charged, or undercharged), (2) the migration drainage style (vertically drained or laterally drained), and (3) the entrapment style (high impedance or low impedance). The charge factor is estimated on the basis of the richness and volumetrics of mature source rocks. The source potential index (SPI), which combines source-rock richness and thickness into a single parameter, is a convenient shortcut for comparing the petroleum potential of different source rocks containing dissimilar kerogen types and for rapidly estimating a basin's regional charging capacity. On a global scale, a general correlation exists between the magnitude of SPI and basinwide petroleum reserves. The dominant migration drainage style can be predicted from the structural and stratigraphic framework of a basin. Recognition of the dominant migration style helps to predict the location of zones of petroleum occurrence in relation to the 'hydrocarbon kitchens.' The entrapment style, which is also dependent on the structural framework and the presence of seals, describes the degree of resistance (i.e. impedance) working against dispersion of the petroleum charge. Application of these working concepts should help significantly reduce geologic risk, particularly in new ventures-type exploration.

  17. Updating the Classification of Geothermal Resources- Presentation

    Broader source: Energy.gov [DOE]

    USGS is working with DOE, the geothermal industry, and academic partners to develop a new geothermal resource classification system.

  18. Updating the Classification of Geothermal Resources

    Broader source: Energy.gov [DOE]

    USGS is working with DOE, the geothermal industry, and academic partners to develop a new geothermal resource classification system.

  19. Industrial Steam Power Cycles Final End-Use Classification

    E-Print Network [OSTI]

    Waterland, A. F.

    1983-01-01T23:59:59.000Z

    Final end uses of steam include two major classifications: those uses that condense the steam against heat transfer surfaces to provide heat to an item of process or service equipment; and those that require a mass flow of steam for stripping...

  20. 163 SDSU Curriculum Guide 2010 COURSE CLASSIFICATION SYSTEM --EXAMPLES

    E-Print Network [OSTI]

    Ponce, V. Miguel

    163 SDSU Curriculum Guide 2010 COURSE CLASSIFICATION SYSTEM -- EXAMPLES Course Classification of business and other machines; accounting, geography, foreign languages, home economics, psychology, library, cartography, audiovisual, mathematics, library science, police science. C-16 Science laboratories Laboratories

  1. Explosives Classifications Tracking System User Manual

    SciTech Connect (OSTI)

    Genoni, R.P.

    1993-10-01T23:59:59.000Z

    The Explosives Classification Tracking System (ECTS) presents information and data for U.S. Department of Energy (DOE) explosives classifications of interest to EM-561, Transportation Management Division, other DOE facilities, and contractors. It is intended to be useful to the scientist, engineer, and transportation professional, who needs to classify or transport explosives. This release of the ECTS reflects upgrading of the software which provides the user with an environment that makes comprehensive retrieval of explosives related information quick and easy. Quarterly updates will be provided to the ECTS throughout its development in FY 1993 and thereafter. The ECTS is a stand alone, single user system that contains unclassified, publicly available information, and administrative information (contractor names, product descriptions, transmittal dates, EX-Numbers, etc.) information from many sources for non-decisional engineering and shipping activities. The data is the most up-to-date and accurate available to the knowledge of the system developer. The system is designed to permit easy revision and updating as new information and data become available. These, additions and corrections are welcomed by the developer. This user manual is intended to help the user install, understand, and operate the system so that the desired information may be readily obtained, reviewed, and reported.

  2. Systems and Industry Analyses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructureProposed Action(InsertAbout theSystems Long Term

  3. Certificate Industrial and Systems Engineering

    E-Print Network [OSTI]

    Su, Xiao

    Six Sigma Certificate Industrial and Systems Engineering San José State University September, 2008 #12;1 Lean Enterprise and Six Sigma Lean Enterprise about transforming the old mass production-to-cradle design, incorporating design for manufacturability, reproducibility, product lifecycle, etc. Six Sigma

  4. UNDERGRADUATE DEGREES Industrial and Systems Engineering

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    control, information technologies, and electronics and solar power assembly and reliability. Students solving. Students delve into systems modeling and simulation, systems design and the simplificationUNDERGRADUATE DEGREES Industrial and Systems Engineering The Bachelor's Degree in Industrial

  5. Industrial & Systems Engineering Areas of Engineering Interests

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

  6. Support Vector Learning for Fuzzy Rule-Based Classification Systems

    E-Print Network [OSTI]

    Chen, Yixin

    . As a powerful machine learning approach for pattern recognition problems, support vector machine (SVM) is known1 Support Vector Learning for Fuzzy Rule-Based Classification Systems Yixin Chen, Student Member DRAFT #12;2 Abstract To design a fuzzy rule-based classification system (fuzzy classifier) with good

  7. Compressive Video Classification for Decision Systems with Limited Resources

    E-Print Network [OSTI]

    Tsakalides, Panagiotis

    by the introduction of efficient computational models is video classification. With the advent of digital TVCompressive Video Classification for Decision Systems with Limited Resources George Tzagkarakis, Pavlos Charalampidis, Grigorios Tsagkatakis, Jean-Luc Starck, and Panagiotis Tsakalides Commissariat `a l'´Energie

  8. industrial & systems (ISE) Industrial and Systems Engineers use engineering and business principles

    E-Print Network [OSTI]

    Rohs, Remo

    to linear programming; transportation and assignment problems; dynamic program- ming; deterministic to programing, software and multimedia. USC's undergraduate ISE curriculum prepares students for industry. Programs Available · Industrial and Systems Engineering Bachelor of Science 129 units · Industrial

  9. A PROPOSAL FOR THE PIRSF (PIR SUPERFAMILY) CLASSIFICATION SYSTEM

    E-Print Network [OSTI]

    A PROPOSAL FOR THE PIRSF (PIR SUPERFAMILY) CLASSIFICATION SYSTEM May 30, 2003 Protein Information................................................................................. 4 D. PIR Superfamily Redefined domains might be present. PIR responded to this dilemma in 1993 by distinguishing two types

  10. Pattern Classification Using a Quantum System Dan Ventura

    E-Print Network [OSTI]

    Martinez, Tony R.

    Pattern Classification Using a Quantum System Dan Ventura Brigham Young University Department of Computer Science Provo, UT 84602 USA ventura@cs.byu.edu http://axon.cs.byu.edu/Dan We consider and compare

  11. Classification of integrable super-systems using the SsTools environment ?

    E-Print Network [OSTI]

    Wolf, Thomas

    Program Library, Queen's University of Belfast, N. Ireland; see also [1] _______ ? Subject classification Classification of integrable super-systems using the SsTools environment. ____________________________________________________________________________ Abstract A classification problem is proposed for supersymmetric evolutionary PDE that s* *at- isfy

  12. industrial & systems (ISE) Industrial and Systems Engineers use engineering and business prin-

    E-Print Network [OSTI]

    Rohs, Remo

    70 industrial & systems (ISE) Industrial and Systems Engineers use engineering and business prin waste of physical and human resources. These engineers are involved in developing manufacturing systems to help companies compete in today's global marketplace. The Industrial and Systems Engineer's task

  13. Industrial Conservation Technology Energy Savings Monitoring System

    E-Print Network [OSTI]

    Crowell, J. J.; Phipps, H. R., Jr.

    1980-01-01T23:59:59.000Z

    A system is described which monitors actual market penetration and energy savings of Department of Energy sponsored industrial conservation commercial technologies. The procedure to implement a new, technology into the Impact Scoreboard System (ISS...

  14. Design of Industrial Process Refrigeration Systems

    E-Print Network [OSTI]

    Witherell, W. D.

    of the study is discussed in terms of identifying refrigeration intensive processes. Specific and general conclusions are presented to help faci I itate proper industrial refrigeration system design throughout fhe industry. This paper presents the resul ts... custaner's specifications. Most systems fall into two broad categories: Vapor Canpression Refrigeration Cycles - Mechanical or Steam Jet Canpression Systems Absorption Refrigeration Cycles - Heat Operated Cycles As shown in Table I, refrigerations...

  15. Optimization of Industrial Refrigeration Systems

    E-Print Network [OSTI]

    Flack, P. J.; Sharp, M. K.; Case, M. E.; Gregory, R. W.; Case, P. L.

    A computer program designed to optimize the size of an evaporative condenser in a two-stage industrial refrigeration plant was created. The program sizes both the high-stage and low-stage compressors and an evaporative condenser. Once the initial...

  16. Automated packing systems: Review of industrial implementations.

    E-Print Network [OSTI]

    Whelan, Paul F.

    Automated packing systems: Review of industrial implementations. Paul F. Whelan School in these applications. An outline of one such industrial application, the automated placement of shape templates Mathematics University of Wales Cardiff, Wales. ABSTRACT The problems involved in the automated packing

  17. Cutting Industrial Solar System Costs in Half

    E-Print Network [OSTI]

    Niess, R. C.; Weinstein, A.

    1982-01-01T23:59:59.000Z

    While there are technical, social, environmental and institutional barriers to the widespread use of solar systems, the principle barrier is economic. For commercial and industrial firms to turn to this alternate energy source, the first cost must...

  18. Occupant Classification System for Automotive Airbag Suppression Michael E. Farmer

    E-Print Network [OSTI]

    Occupant Classification System for Automotive Airbag Suppression Michael E. Farmer§ and Anil K@cse.msu.edu Abstract The introduction of airbags into automobiles has significantly improved the safety of the occupants. Unfortunately, airbags can also cause fatal injuries if the occupant is a child smaller (in

  19. industrial & systems Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    Introduction to Operations Research: Deterministic Models (3, Fa) Introduction to linear programming; transportation and assignment problems; dynamic programming; integer program- ming; nonlinear programming and maintain high standards of quality. The Information Systems option gives extra emphasis to programming

  20. Advanced, Energy-Efficient Hybrid Membrane System for Industrial...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced, Energy-Efficient Hybrid Membrane System for Industrial Water Reuse Advanced, Energy-Efficient Hybrid Membrane System for Industrial Water Reuse hybridmembranesystemsfa...

  1. United States Industrial Motor-Driven Systems Market Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Motor-Driven Systems Market Assessment: Charting a Roadmap to Energy Savings for Industry United States Industrial Motor-Driven Systems Market Assessment: Charting a Roadmap to...

  2. Improving Pumping System Performance: A Sourcebook for Industry...

    Broader source: Energy.gov (indexed) [DOE]

    Pumping System Performance: A Sourcebook for Industry - Second Edition Improving Pumping System Performance: A Sourcebook for Industry - Second Edition This sourcebook is designed...

  3. Improving Steam System Performance: A Sourcebook for Industry...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Improving Steam System Performance: A Sourcebook for Industry, Second Edition Improving Steam System Performance: A Sourcebook for Industry, Second Edition This sourcebook is...

  4. Industrial Compressed Air System Energy Efficiency Guidebook.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1993-12-01T23:59:59.000Z

    Energy efficient design, operation and maintenance of compressed air systems in industrial plants can provide substantial reductions in electric power and other operational costs. This guidebook will help identify cost effective, energy efficiency opportunities in compressed air system design, re-design, operation and maintenance. The guidebook provides: (1) a broad overview of industrial compressed air systems, (2) methods for estimating compressed air consumption and projected air savings, (3) a description of applicable, generic energy conservation measures, and, (4) a review of some compressed air system demonstration projects that have taken place over the last two years. The primary audience for this guidebook includes plant maintenance supervisors, plant engineers, plant managers and others interested in energy management of industrial compressed air systems.

  5. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    Research: Deterministic Models (3, Fa) Introduction to linear programming; transportation and assignment and maintain high standards of quality. The Information Systems option gives extra emphasis to programming an excellent background for an advanced degree in Business Administration or Engineering. PROGRAMS AVAILABLE

  6. industrial & systems Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    (3, Fa) Introduction to linear programming; trans- portation and assignment problems; dynamic and maintain high standards of quality. The Information Systems option gives extra emphasis to programming for advanced degrees in fields as diverse as Engineering, Business Administration, Law or Public Policy. ProgrAmS

  7. What Those Call Numbers Mean: The Library of Congress Classification System

    E-Print Network [OSTI]

    Hutcheon, James M.

    What Those Call Numbers Mean: The Library of Congress Classification System The call number system that we use in this library, which is called the Library of Congress Classification System subject areas. If you know what letter indicates the classification for the subject you need, you can find

  8. Tools to Boost Steam System Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program steam software tools can help industrial plants identify steam system improvements to save energy and money.

  9. Graduate Study Industrial and Systems

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    , and human-machine systems. Lean Six Sigma Applying principles of lean production and Six Sigma in manufacturing and service plants. Lean manufacturing and Six Sigma methodology has become a key component

  10. Optimization of Industrial Refrigeration Systems 

    E-Print Network [OSTI]

    Flack, P. J.; Sharp, M. K.; Case, M. E.; Gregory, R. W.; Case, P. L.

    1995-01-01T23:59:59.000Z

    schematic of a basic two-stage re frigeration system. It shows six of the seven basic components in a refrigeration system; the evaporator, booster or low-stage compressor, intercooler, com pressor or high-stage compressor, condenser and an expansion... the evaporator coils. Air from the refriger ated space is forced over the coils and loses thennal energy to the refrigerant The liquid refrigerant evaporates as it absorbs the them1al energy. The re frigerant leaves the evaporator and enters the booster as a...

  11. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

  12. Cutting Industrial Solar System Costs in Half 

    E-Print Network [OSTI]

    Niess, R. C.; Weinstein, A.

    1982-01-01T23:59:59.000Z

    collectors that result in an installed first cost that approximates one half of that of conventional solar systems. This technology is now available for producing up to 220 F hot water for industrial process heat, space heating, and service hot water heating...

  13. Industrial Energy Systems Laboratory Gnie mcanique

    E-Print Network [OSTI]

    of the building. This enables the computation of distances and the integration of networks (i.e. district heatingIndustrial Energy Systems Laboratory SECTION DE Génie mécanique Intelligent Generation of Eco-District of increasing energy consumption and the growing high populated urban areas is challenging urban district

  14. High Power UV LED Industrial Curing Systems

    SciTech Connect (OSTI)

    Karlicek, Robert, F., Jr; Sargent, Robert

    2012-05-14T23:59:59.000Z

    UV curing is a green technology that is largely underutilized because UV radiation sources like Hg Lamps are unreliable and difficult to use. High Power UV LEDs are now efficient enough to replace Hg Lamps, and offer significantly improved performance relative to Hg Lamps. In this study, a modular, scalable high power UV LED curing system was designed and tested, performing well in industrial coating evaluations. In order to achieve mechanical form factors similar to commercial Hg Lamp systems, a new patent pending design was employed enabling high irradiance at long working distances. While high power UV LEDs are currently only available at longer UVA wavelengths, rapid progress on UVC LEDs and the development of new formulations designed specifically for use with UV LED sources will converge to drive more rapid adoption of UV curing technology. An assessment of the environmental impact of replacing Hg Lamp systems with UV LED systems was performed. Since UV curing is used in only a small portion of the industrial printing, painting and coating markets, the ease of use of UV LED systems should increase the use of UV curing technology. Even a small penetration of the significant number of industrial applications still using oven curing and drying will lead to significant reductions in energy consumption and reductions in the emission of green house gases and solvent emissions.

  15. Industrial Plant Objectives and Cogeneration System Development

    E-Print Network [OSTI]

    Kovacik, J. M.

    1983-01-01T23:59:59.000Z

    cogen eration facility. APPLICATION CONSIDERATIONS FOR COGENERATION CYCLES Cogeneration is the term popularly used to describe energy supply systems where turbines gene rate power (kW or hpj while providing thermal energy for use in process areas... HEAT 15% 48% BOILER CONOENSER ASSOC. LOSSES LOSSES FIG. 2 - FUEL UTILIZATION EFFECTIVENESS The three types of topping cogeneration cycles usually encountered in industrial practice are steam turbine, gas turbine, and combined cycles...

  16. A complete electrical hazard classification system and its application

    SciTech Connect (OSTI)

    Gordon, Lloyd B [Los Alamos National Laboratory; Cartelli, Laura [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    The Standard for Electrical Safety in the Workplace, NFPA 70E, and relevant OSHA electrical safety standards evolved to address the hazards of 60-Hz power that are faced primarily by electricians, linemen, and others performing facility and utility work. This leaves a substantial gap in the management of electrical hazards in Research and Development (R&D) and specialized high voltage and high power equipment. Examples include lasers, accelerators, capacitor banks, electroplating systems, induction and dielectric heating systems, etc. Although all such systems are fed by 50/60 Hz alternating current (ac) power, we find substantial use of direct current (dc) electrical energy, and the use of capacitors, inductors, batteries, and radiofrequency (RF) power. The electrical hazards of these forms of electricity and their systems are different than for 50160 Hz power. Over the past 10 years there has been an effort to develop a method of classifying all of the electrical hazards found in all types of R&D and utilization equipment. Examples of the variation of these hazards from NFPA 70E include (a) high voltage can be harmless, if the available current is sufficiently low, (b) low voltage can be harmful if the available current/power is high, (c) high voltage capacitor hazards are unique and include severe reflex action, affects on the heart, and tissue damage, and (d) arc flash hazard analysis for dc and capacitor systems are not provided in existing standards. This work has led to a comprehensive electrical hazard classification system that is based on various research conducted over the past 100 years, on analysis of such systems in R&D, and on decades of experience. Initially, national electrical safety codes required the qualified worker only to know the source voltage to determine the shock hazard. Later, as arc flash hazards were understood, the fault current and clearing time were needed. These items are still insufficient to fully characterize all types of electrical hazards. The new comprehensive electrical hazard classification system uses a combination of voltage, shock current available, fault current available, power, energy, and waveform to classify all forms of electrical hazards. Based on this electrical hazard classification system, many new tools have been developed, including (a) work controls for these hazards, (b) better selection of PPE for R&D work, (c) improved training, and (d) a new Severity Ranking Tool that is used to rank electrical accidents and incidents with various forms of electrical energy.

  17. Tip sheet: Expanded Library of Congress Call Number Classification system Call Number Subject Matter

    E-Print Network [OSTI]

    Kambhampati, Patanjali

    Tip sheet: Expanded Library of Congress Call Number Classification system Call Number Subject R: Medicine T: Technology U: Military Science Z: Bibliography. Library Science. Information

  18. Joseph and Rosemary Bittorf Industrial and Systems Engineering Scholarship

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    Joseph and Rosemary Bittorf Industrial and Systems Engineering Scholarship The purpose of the Fund be a declared major in Industrial and Systems Engineering. Candidates must be in good standing in Industrial and Systems Engineering in the College of Engineering and Engineering Technology for the academic

  19. Industrial Advanced Turbine Systems Program overview

    SciTech Connect (OSTI)

    Esbeck, D.W.

    1995-12-31T23:59:59.000Z

    DOE`s ATS Program will lead to the development of an optimized, energy efficient, and environmentally friendly gas turbine power systems in the 3 to 20 MW class. Market studies were conducted for application of ATS to the dispersed/distributed electric power generation market. The technology studies have led to the design of a gas-fired, recuperated, industrial size gas turbine. The Ceramic Stationary Gas Turbine program continues. In the High Performance Steam Systems program, a 100 hour development test to prove the advanced 1500 F, 1500 psig system has been successfully completed. A market transformation will take place: the customer will be offered a choice of energy conversion technologies to meet heat and power generation needs into the next century.

  20. United States Industrial Electric Motor Systems Market Opportunities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Industry MotorMaster+ User Manual New Motor Systems Market Assessment AMO and LBNL are currently developing an update to the original Motor Systems Market Assessment. The...

  1. United States Industrial Motor Systems Market Opportunities Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Motor Systems Market Opportunities Assessment: Executive Summary United States Industrial Motor Systems Market Opportunities Assessment: Executive Summary In addition to serving...

  2. A SURVEY ON INDUSTRIAL VISION SYSTEMS, APPLICATIONS AND TOOLS

    E-Print Network [OSTI]

    Petrakis, Euripides G.M.

    automation [1]. A plethora of industrial activities have benefited from the application of machine vision fixed. In most cases, industrial automation systems are designed to inspect only known objects at fixedA SURVEY ON INDUSTRIAL VISION SYSTEMS, APPLICATIONS AND TOOLS 1 Elias N. Malamas, Euripides G

  3. Hardware-Based Support Vector Machine Classification in Logarithmic Number Systems

    E-Print Network [OSTI]

    Pottenger, William M.

    for its energy-efficient properties [3,9]. Successful deployment of logarithmic functionality in neuralHardware-Based Support Vector Machine Classification in Logarithmic Number Systems Faisal M. Khan loss in classification accuracy. I. INTRODUCTION Cognitive systems capable of gathering information

  4. Combustion Turbine CHP System for Food Processing Industry -...

    Broader source: Energy.gov (indexed) [DOE]

    Presentation on Combustion Turbine CHP System for Food Processing Industry, given by Kevin Chilcoat of Frito-Lay North America, at the U.S. DOE Industrial Distributed Energy...

  5. SPOTLIGHT on: Jennifer Dowling Industrial and Systems Engineering

    E-Print Network [OSTI]

    Wang, Hai

    SPOTLIGHT on: Jennifer Dowling Industrial and Systems Engineering Hometown: La Mirada, CA Involvement at USC: Society of Women Engineers- Corporate Affairs Committee member, Institute of Industrial Engineers- President, Viterbi Graduate Admissions Office- student staff member, Song Girl 2007 Favorite

  6. Classification Decision-Making Implicit system Explicit system

    E-Print Network [OSTI]

    Pillow, Jonathan

    system mediated task impacted by working memory/attention demand. 2) Implicit system mediated task explicit task learning when feedback is negative and emotionally valenced--that is, when correct responses that (a) optimize the learning and long-term retention of adaptive behaviors, and those that (b) optimize

  7. Classification Decision-Making Implicit system Explicit system

    E-Print Network [OSTI]

    Maddox, W. Todd

    system mediated task impacted by working memory/attention demand. 2) Implicit system mediated task explicit task learning when feedback is negative and emotionally valenced--that is, when correct responses)]: Background: Identifying reinforcement contingencies that (a) optimize the learning and long-term retention

  8. System diagnostics using qualitative analysis and component functional classification

    DOE Patents [OSTI]

    Reifman, Jaques (Lisle, IL); Wei, Thomas Y. C. (Downers Grove, IL)

    1993-01-01T23:59:59.000Z

    A method for detecting and identifying faulty component candidates during off-normal operations of nuclear power plants involves the qualitative analysis of macroscopic imbalances in the conservation equations of mass, energy and momentum in thermal-hydraulic control volumes associated with one or more plant components and the functional classification of components. The qualitative analysis of mass and energy is performed through the associated equations of state, while imbalances in momentum are obtained by tracking mass flow rates which are incorporated into a first knowledge base. The plant components are functionally classified, according to their type, as sources or sinks of mass, energy and momentum, depending upon which of the three balance equations is most strongly affected by a faulty component which is incorporated into a second knowledge base. Information describing the connections among the components of the system forms a third knowledge base. The method is particularly adapted for use in a diagnostic expert system to detect and identify faulty component candidates in the presence of component failures and is not limited to use in a nuclear power plant, but may be used with virtually any type of thermal-hydraulic operating system.

  9. System diagnostics using qualitative analysis and component functional classification

    DOE Patents [OSTI]

    Reifman, J.; Wei, T.Y.C.

    1993-11-23T23:59:59.000Z

    A method for detecting and identifying faulty component candidates during off-normal operations of nuclear power plants involves the qualitative analysis of macroscopic imbalances in the conservation equations of mass, energy and momentum in thermal-hydraulic control volumes associated with one or more plant components and the functional classification of components. The qualitative analysis of mass and energy is performed through the associated equations of state, while imbalances in momentum are obtained by tracking mass flow rates which are incorporated into a first knowledge base. The plant components are functionally classified, according to their type, as sources or sinks of mass, energy and momentum, depending upon which of the three balance equations is most strongly affected by a faulty component which is incorporated into a second knowledge base. Information describing the connections among the components of the system forms a third knowledge base. The method is particularly adapted for use in a diagnostic expert system to detect and identify faulty component candidates in the presence of component failures and is not limited to use in a nuclear power plant, but may be used with virtually any type of thermal-hydraulic operating system. 5 figures.

  10. Invariant Classification and Limits of Maximally Superintegrable Systems in 3D

    E-Print Network [OSTI]

    J. Capel; J. Kress; S. Post

    2015-01-28T23:59:59.000Z

    The invariant classification of superintegrable systems is reviewed and utilized to construct singular limits between the systems. It is shown, by construction, that all superintegrable systems on conformally flat, 3D complex Riemannian manifolds can be obtained from singular limits of a generic system on the sphere. By using the invariant classification, the limits are geometrically motivated in terms of transformations of roots of the classifying polynomials.

  11. Improving Pumping System Performance: A Sourcebook for Industry, Second Edition

    SciTech Connect (OSTI)

    Not Available

    2006-05-01T23:59:59.000Z

    Prepared for the DOE Industrial Technologies Program, this sourcebook contains the practical guidelines and information manufacturers need to improve the efficiency of their pumping systems.

  12. Advanced, Energy-Efficient Hybrid Membrane System for Industrial...

    Energy Savers [EERE]

    (1 slide) Project Objective Develop and demonstrate advanced hybrid industrial water treatment system that will... Cost-effectively enable at least 50% water reuse...

  13. Lincoln Electric System (Commercial and Industrial)- 2015 Sustainable Energy Program

    Broader source: Energy.gov [DOE]

    Lincoln Electric System (LES) offers a variety of energy efficiency incentives for commercial and industrial customers through the Sustainable Energy Program (SEP). Some incentives are provided on...

  14. Improving Motor and Drive System Performance: A Sourcebook for Industry

    SciTech Connect (OSTI)

    Not Available

    2008-09-01T23:59:59.000Z

    This is one in a series of sourcebooks to assist industrial personnel in understanding and optimizing motors and motor-driven systems

  15. Roadmap: Systems/Industrial Engineering Technology Associate of Applied Science

    E-Print Network [OSTI]

    Sheridan, Scott

    Roadmap: Systems/Industrial Engineering Technology ­ Associate of Applied Science [RE Kent Core Summary below Semester Four: [17 Credit Hours] MERT 22009 Robotics and Flexible Automation 3

  16. Lincoln Electric System (Commercial and Industrial)- Sustainable Energy Program

    Broader source: Energy.gov [DOE]

    Lincoln Electric System (LES) offers a variety of energy efficiency incentives for commercial and industrial customers through the Sustainable Energy Program (SEP). Some incentives are provided on...

  17. Combustion Turbine CHP System for Food Processing Industry -...

    Broader source: Energy.gov (indexed) [DOE]

    power grid. The fact sheet contains performance data from the plant after one year of operation. Combustion Turbine CHP System for Food Processing Industry More Documents &...

  18. Invariant classification of orthogonally separable Hamiltonian systems in Euclidean space

    E-Print Network [OSTI]

    Joshua T. Horwood; Raymond G. McLenaghan; Roman G. Smirnov

    2006-05-07T23:59:59.000Z

    The problem of the invariant classification of the orthogonal coordinate webs defined in Euclidean space is solved within the framework of Felix Klein's Erlangen Program. The results are applied to the problem of integrability of the Calogero-Moser model.

  19. INDUSTRIAL & SYSTEMS ENGINEERING UNDERGRADUATE HANDBOOK 11/8//2010 RENSSELAER POLYTECHNIC INSTITUTE

    E-Print Network [OSTI]

    Salama, Khaled

    INDUSTRIAL & SYSTEMS ENGINEERING UNDERGRADUATE HANDBOOK 11/8//2010 RENSSELAER POLYTECHNIC INSTITUTE School of Engineering Industrial & Systems Engineering #12;2 INDUSTRIAL & SYSTEMS ENGINEERING .................................................................. 1 What is Industrial and Management Engineering (IME)? ......... 1 Are you a candidate for IME

  20. On the use of MapReduce to build Linguistic Fuzzy Rule Based Classification Systems for Big Data

    E-Print Network [OSTI]

    Granada, Universidad de

    fuzzy rules it is able to provide an interpretable and effective classification model. This method of Education. Fuzzy Rule Based Classification Systems (FRBCSs) [4] are potent and popular tools for patternOn the use of MapReduce to build Linguistic Fuzzy Rule Based Classification Systems for Big Data

  1. Group classification of systems of non-linear reaction-diffusion equations with general diffusion matrix. II. Generalized Turing systems

    E-Print Network [OSTI]

    A. G. Nikitin

    2007-07-20T23:59:59.000Z

    Group classification of systems of two coupled nonlinear reaction-diffusion equation with a diagonal diffusion matrix is carried out. Symmetries of diffusion systems with singular diffusion matrix and additional first order derivative terms are described.

  2. Business Process Management Systems enabling continuous improvement in industrial services

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Business Process Management Systems ­ enabling continuous improvement in industrial services Heikki that modern business process management systems (BPMS) provide in improving industrial service processes. A case study identifies improvement opportunities in the order-to- cash process in two service lines

  3. Design Considerations for Industrial Heat Recovery Systems 

    E-Print Network [OSTI]

    Bywaters, R. P.

    1979-01-01T23:59:59.000Z

    recovery design considerations as well as a summary of typical "waste heat" sources and application sites. A procedure for conducting industrial waste heat surveys is presented. Thermodynamic and heat transfer factors are discussed. Problems associated...

  4. Design Considerations for Industrial Heat Recovery Systems

    E-Print Network [OSTI]

    Bywaters, R. P.

    1979-01-01T23:59:59.000Z

    recovery design considerations as well as a summary of typical "waste heat" sources and application sites. A procedure for conducting industrial waste heat surveys is presented. Thermodynamic and heat transfer factors are discussed. Problems associated...

  5. System for monitoring an industrial or biological process

    DOE Patents [OSTI]

    Gross, Kenneth C. (Argonne, IL); Wegerich, Stephan W. (Argonne, IL); Vilim, Rick B. (Argonne, IL); White, Andrew M. (Skokie, IL)

    1998-01-01T23:59:59.000Z

    A method and apparatus for monitoring and responding to conditions of an industrial process. Industrial process signals, such as repetitive manufacturing, testing and operational machine signals, are generated by a system. Sensor signals characteristic of the process are generated over a time length and compared to reference signals over the time length. The industrial signals are adjusted over the time length relative to the reference signals, the phase shift of the industrial signals is optimized to the reference signals and the resulting signals output for analysis by systems such as SPRT.

  6. Investigation of greenhouse gas reduction strategies by industries : an enterprise systems architecting approach

    E-Print Network [OSTI]

    Tanthullu Athmaram, Kumaresh Babu

    2012-01-01T23:59:59.000Z

    This thesis explores an enterprise systems architecting approach to investigate the greenhouse gas reduction strategies followed by industries, especially for automotive industry and Information Technology industry. The ...

  7. China's Energy Management System Program for Industry

    E-Print Network [OSTI]

    Hedman, B.; Yu, Y.; Friedman, Z.; Taylor, R.

    2014-01-01T23:59:59.000Z

    En er gy C o n su m p ti o n , Q u ad s Source: DOE EIA International Energy Outlook 2013 4 * Includes fuel for electricity generation and T&D losses ESL-IE-14-05-24 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New... y En er gy C o n su m p ti o n , Q u ad s Source: DOE EIA International Energy Outlook 2013 Total Non-OECD Total OECD China U.S. India 5 ESL-IE-14-05-24 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May...

  8. China's Energy Management System Program for Industry 

    E-Print Network [OSTI]

    Hedman, B.; Yu, Y.; Friedman, Z.; Taylor, R.

    2014-01-01T23:59:59.000Z

    En er gy C o n su m p ti o n , Q u ad s Source: DOE EIA International Energy Outlook 2013 4 * Includes fuel for electricity generation and T&D losses ESL-IE-14-05-24 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New... y En er gy C o n su m p ti o n , Q u ad s Source: DOE EIA International Energy Outlook 2013 Total Non-OECD Total OECD China U.S. India 5 ESL-IE-14-05-24 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May...

  9. Industrial Energy Systems Laboratory (LENI) Gnie mcanique

    E-Print Network [OSTI]

    Candea, George

    -Liquid Heat Exchanger For Waste Heat Recovery In Exhaust Gases Author: Antoine Breton Supervisors: Prof contained in wasted hot gases will allow to reduce industrial energy consumption. Heat recovery. Hot wasted exhaust gases Cold Water Polymer Spiral Film Gas Liquid Heat Exchanger Cold exhaust gases

  10. Dr. Lewis Ntaimo Industrial and Systems Engineering

    E-Print Network [OSTI]

    Ding, Yu

    for renewable energy, including wind energy, is cost and marketability and that wind energy is perhaps the most of the cost of wind energy generation, depending on wind farm size, terrain and other factors. "You can in the market. However, to sustain wind energy generation and increase its market share, industry needs

  11. Industrial & Systems Engineering University of Washington

    E-Print Network [OSTI]

    Anderson, Richard

    with people #12;Environment People Technology Energy Society Industrial Engineering ISEs examine the entire and environments #12;My focus area: Human Factors and Transportation · The study of factors and development" · Adjust the volume 2002 BMW 745 I drive I drive If interested in more info: USA Today article by James R

  12. 722012-13SuggestedCoursePlan INDUSTRIAL & SYSTEMS ENGINEERING

    E-Print Network [OSTI]

    Zhou, Chongwu

    . to Industrial Engineering ISE 220: Probability Concepts in Engr. ISE 225: Engineering Statistics I ISE 232L722012-13SuggestedCoursePlan INDUSTRIAL & SYSTEMS ENGINEERING FIRST YEAR FALL: 16 units SPRING: 15 and Thermodynamics PHYS 152L: Electricity and Magnetism CHEMISTRY / MATERIALS SCIENCE (4 UNITS) CHEM 105AL: General

  13. Classification of Duty Pulses Affecting Energy Storage Systems in Vehicular Applications

    E-Print Network [OSTI]

    Boyer, Edmond

    Classification of Duty Pulses Affecting Energy Storage Systems in Vehicular Applications Arnaud, the energy storage system (ESS) remains the most expensive and the most critical part among the entire in real-world conditions or blindly oversize the energy storage system in order to compensate for reduced

  14. Exploring project collaboration systems in the building industry 

    E-Print Network [OSTI]

    Laepple, Eberhard Sebastian

    2006-10-30T23:59:59.000Z

    The use of Web-Based-Collaboration-Systems (WBCS) continues to grow as part of information technology development in the Architecture-Engineering-Construction (AEC) industry. WBCS provide different media channels to support ...

  15. A normative approach to the evaluation of industrialized building systems

    E-Print Network [OSTI]

    Alhasani, Nadia Mehdi

    1984-01-01T23:59:59.000Z

    The rapid development of the building industry within the last 10-15 years involved the adaptation of a more. specialized and advanced system of construction and management. And, with the expanding alternatives of ...

  16. Advanced Burners and Combustion Controls for Industrial Heat Recovery Systems 

    E-Print Network [OSTI]

    Ferri, J. L.

    1988-01-01T23:59:59.000Z

    When recuperators are installed on industrial furnaces, burners and ratio control systems must continue to operate reliably under a wider range of conditions. Most currently available hot air burners use dilution air to prevent fuel decomposition...

  17. The Analysis and Development of Large Industrial Steam Systems

    E-Print Network [OSTI]

    Waterland, A. F.

    1980-01-01T23:59:59.000Z

    Chemicals, petroleum, pulp and paper, and many other industries depend heavily on extensive complex steam systems for thermal and mechanical energy delivery. Steam's versatility and desirable characteristics as both a heat transfer medium and a...

  18. Improved Combustion System for Energy Conservation in Industry 

    E-Print Network [OSTI]

    Thekdi, A. C.; Hemsath, K. H.

    1979-01-01T23:59:59.000Z

    IMPROVED COMBUSTION SYSTEM FOR ENERGY CONSERVATION IN INDUSTRY Arvind C. Thekdi and Klaus H. Hemsath Thermal Systems Technical Center Midland-Ross Corporation Toledo, Ohio INTRODUCTION U.S. industry consumes approximately 40 percent of all..., some consideration is given to the process changes and flue gas treatment at the furnace exhaust end to reduce the NO x concentration in flue gases. Midland-Ross, at present, is develop ing a process which can treat the flue gases from high...

  19. DEPARTMENT OF INDUSTRIAL AND SYSTEMS ENGINEERING Dwight look College of Engineering

    E-Print Network [OSTI]

    Behmer, Spencer T.

    DEPARTMENT OF INDUSTRIAL AND SYSTEMS ENGINEERING Dwight look College of Engineering .NOTICE of Industrial &Systems Engineering; participate in scholarly activities such as conducting research.D. in industrial and systems engineering, cognitive psychology or a closely related discipline. SALARY

  20. Process Control Systems in the Chemical Industry: Safety vs. Security

    SciTech Connect (OSTI)

    Jeffrey Hahn; Thomas Anderson

    2005-04-01T23:59:59.000Z

    Traditionally, the primary focus of the chemical industry has been safety and productivity. However, recent threats to our nation’s critical infrastructure have prompted a tightening of security measures across many different industry sectors. Reducing vulnerabilities of control systems against physical and cyber attack is necessary to ensure the safety, security and effective functioning of these systems. The U.S. Department of Homeland Security has developed a strategy to secure these vulnerabilities. Crucial to this strategy is the Control Systems Security and Test Center (CSSTC) established to test and analyze control systems equipment. In addition, the CSSTC promotes a proactive, collaborative approach to increase industry's awareness of standards, products and processes that can enhance the security of control systems. This paper outlines measures that can be taken to enhance the cybersecurity of process control systems in the chemical sector.

  1. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    SHIP - Solar heat for industrial processes. Internationalsolar power could be used to provide process heat for

  2. Advanced Controls for Industrial Compressed Air Systems

    E-Print Network [OSTI]

    Vold, P.; Gabel, S.; Carmichael, L.; Curtner, K.; Cirillo, N. C. Jr.

    at a Goulds Pumps manufacturing plant in Seneca Falls, New York, and is currently undergoing field testing. The compressed air system will optimize the energy efficiency of the 7 compressor system (1,850hp) at Goulds, while reducing system pressure...

  3. Mechanical Engineering Industrial Energy Systems Laboratory

    E-Print Network [OSTI]

    Candea, George

    of District Heating and Cooling with an Electro-Thermal Energy Storage System Master Thesis ANURAG KUMAR of the district energy systems is performed and modifications are proposed in a district heating network. Based of the ETES system to integrate the district heating and cooling networks. An operational synergy is developed

  4. CLASSIFICATION OF SYSTEMS' HEALTH CONDITION USING THE NEW ADAPTIVE FUZZY-BASED FEATURE

    E-Print Network [OSTI]

    Boyer, Edmond

    level (called hydraulic pressure data) are used and compared. The results show that based on the AE-based and also on the hydraulic pressure based AFFCA systems health state classification, the changes system and the related data to be discussed are related to the evaluation of sliding friction wear

  5. Improve Motor System Efficiency with MotorMaster+, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program MotorMaster+ software tool aids industrial plants with finding energy-efficient motor replacement options and managing motor systems.

  6. Self tuning system for industrial surveillance

    DOE Patents [OSTI]

    Stephan, Wegerich W (Glendale Hts., IL); Jarman, Kristin K. (Richard, WA); Gross, Kenneth C. (Bolingbrook, IL)

    2000-01-01T23:59:59.000Z

    A method and system for automatically establishing operational parameters of a statistical surveillance system. The method and system performs a frequency domain transition on time dependent data, a first Fourier composite is formed, serial correlation is removed, a series of Gaussian whiteness tests are performed along with an autocorrelation test, Fourier coefficients are stored and a second Fourier composite is formed. Pseudorandom noise is added, a Monte Carlo simulation is performed to establish SPRT missed alarm probabilities and tested with a synthesized signal. A false alarm test is then emperically evaluated and if less than a desired target value, then SPRT probabilities are used for performing surveillance.

  7. Classification of transportation packaging and dry spent fuel storage system components according to importance to safety

    SciTech Connect (OSTI)

    McConnell, J.W., Jr; Ayers, A.L. Jr; Tyacke, M.J. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

    1996-02-01T23:59:59.000Z

    This report provides a graded approach for classification of components used in transportation packaging and dry spent fuel storage systems. This approach provides a method for identifying, the classification of components according to importance to safety within transportation packagings and dry spent fuel storage systems. Record retention requirements are discussed to identify the documentation necessary to validate that the individual components were fabricated in accordance with their assigned classification. A review of the existing regulations pertaining to transportation packagings and dry storage systems was performed to identify current requirements The general types of transportation packagings and dry storage systems were identified. Discussions were held with suppliers and fabricators of packagings and storage systems to determine current practices. The methodology used in this report is based on Regulatory Guide 7.10, Establishing Quality Assurance Programs for Packaging Used in the Transport of Radioactive Material. This report also includes a list of generic components for each of the general types of transportation packagings and spent fuel storage systems. The safety importance of each component is discussed, and a classification category is assigned.

  8. Design Considerations for Large Industrial Cogeneration Systems

    E-Print Network [OSTI]

    Kovacik, J. M.

    1979-01-01T23:59:59.000Z

    available to fully exploit this technology be fully understood. This paper will review the considerations required to develop meaningful cogeneration systems. Turbine types, ratings, steam conditions and other parameters will be discussed and their impact...

  9. Thermal Plasma Systems for Industrial Processes

    E-Print Network [OSTI]

    Fey, M. G.; Meyer, T. N.; Reed, W. H.; Philbrook, W. O.

    1982-01-01T23:59:59.000Z

    furnaces, extending from below 2000 F to almost any conceivably useful processing temperature, with efficiencies much higher than can be achieved with combustion heating equipment. Numerous applications for plasma systems exist in the chemical...

  10. Design Considerations for Large Industrial Cogeneration Systems 

    E-Print Network [OSTI]

    Kovacik, J. M.

    1979-01-01T23:59:59.000Z

    available to fully exploit this technology be fully understood. This paper will review the considerations required to develop meaningful cogeneration systems. Turbine types, ratings, steam conditions and other parameters will be discussed and their impact...

  11. Improving Industrial Refrigeration System Efficiency - Actual Applications

    E-Print Network [OSTI]

    White, T. L.

    1980-01-01T23:59:59.000Z

    cycle cooling during winter operation, compressor intercooling, direct refrigeration vs. brine cooling, insulation of cold piping to reduce heat gain, multiple screw compressors for improved part load operation, evaporative condensers for reduced system...

  12. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    oil, starch and corn refining, since these can be a source of fuel products. The sugar cane industry

  13. Graduate School of Creative Science and Engineering Department of Industrial and Management Systems Engineering

    E-Print Network [OSTI]

    Kaji, Hajime

    Graduate School of Creative Science and Engineering Department of Industrial and Management and Engineering Department of Industrial and Management Systems Engineering Research Instruction Application; Graduate School of Creative Science and Engineering Department of Industrial and Management Systems

  14. Protein Classification Artificial Neural System: A filter program for database search

    SciTech Connect (OSTI)

    Wu, C.H.; Wang, C.C.; Yazdanpanahi, I. [Univ. of Texas Health Center, Tyler, TX (United States)

    1993-12-31T23:59:59.000Z

    A neural network classification method has been developed as an alternative approach to the large database search/organization problem. The system, termed Protein Classification Artificial Neural System (ProCANS), is implemented on a Cray Y-MP8/864 supercomputer for rapid superfamily classification of unknown proteins based on the information content of the neural interconnections. The system employs an n-gram hashing function for sequence encoding and modular back-propagation networks for classification. The system was developed with the first 2,724 entries in 690 superfamilies of the annotated PIR (Protein Identification Resource) protein sequence database. Three prediction sets were used to evaluate the system performance. The first consists of 651 annotated entries randomly chosen from the 690 superfamilies. The second set consists of 482 unclassified entries from the preliminary PIR database, whose superfamilies were identified by the fasta, blastp and sp database search methods. The third set is a subset of data set 2 with only superfamilies of more than 20 entries. At a low cut-off score of 0.01, the sensitivity is 92, 82 and 100%, respectively, for the three prediction sets. At a high cut-off score of 0.9, on the other hand, a close to 100% specificity is achieved with a reduced sensitivity.

  15. An Extraction Method for the Characterization of the Fuzzy Rule Based Classification Systems' Behavior using Data Complexity

    E-Print Network [OSTI]

    Granada, Universidad de

    be considered a new trend in the use of FRBCSs in pattern recognition. No data complexity metrics have beenAn Extraction Method for the Characterization of the Fuzzy Rule Based Classification Systems Abstract-- When dealing with problems using Fuzzy Rule Based Classification Systems it is difficult to know

  16. Department of Industrial and Systems Engineering,

    E-Print Network [OSTI]

    Zhou, Shiyu

    ,8­11]. The basic idea is to shoot a beam of ultrasonic sound through the particle-liquid system. Then due to local speed liquid jets of up to 300m/s [12]. Due to these intense effects, the cavitation can effectively mix sound and the dispersion time. Exten- sive experiments have been conducted to illustrate

  17. Optical guidance system for industrial vehicles

    DOE Patents [OSTI]

    Dyer, Robert D. (Richland, WA); Eschbach, Eugene A. (Richland, WA); Griffin, Jeffrey W. (Kennewick, WA); Lind, Michael A. (Durham, OR); Buck, Erville C. (Eugene, OR); Buck, Roger L. (Springfield, OR)

    1990-01-01T23:59:59.000Z

    An automatically guided vehicle system for steering a vehicle. Optical sensing detects an image of a segment of track mounted above the path of the vehicle. Electrical signals corresponding to the position of the track are generated. A control circuit then converts these signals into movements for the steering of the vehicle.

  18. Industrial Energy Systems Laboratory (LENI) Gnie mcanique

    E-Print Network [OSTI]

    Diggavi, Suhas

    ) Heat recovery steam generation By recovering the heat of the gas turbines, the requirements steam consumption Steam turbine power streams The implementation of a heat recovery system increases electricity and steam production). As the refinery is not connected to the grid, the gas turbines' load

  19. industrial & systems (ISE) Industrial and Systems engineers use engineering and business principles

    E-Print Network [OSTI]

    Rohs, Remo

    and assignment problems; dynamic programming; integer programming; non- linear programming. Prerequisite: MATH to Operations Re- search: Deterministic Models (3, Fa) In- troduction to linear programming; transpor- tation to programming, software and multimedia. USC's undergraduate ISE curriculum prepares students for industry

  20. Toward a Text Classification System for the Quality Assessment of Software Requirements Written in

    E-Print Network [OSTI]

    Kosseim, Leila

    in Natural Language Olga Ormandjieva Department of Computer Science and Software Engineering ConcordiaToward a Text Classification System for the Quality Assessment of Software Requirements Written and Software Engineering Concordia University Montreal, Canada kosseim@cse.concordia.ca Ishrar Hussain

  1. Next Generation Nuclear Plant Structures, Systems, and Components Safety Classification White Paper

    SciTech Connect (OSTI)

    Pete Jordan

    2010-09-01T23:59:59.000Z

    This white paper outlines the relevant regulatory policy and guidance for a risk-informed approach for establishing the safety classification of Structures, Systems, and Components (SSCs) for the Next Generation Nuclear Plant and sets forth certain facts for review and discussion in order facilitate an effective submittal leading to an NGNP Combined Operating License application under 10 CFR 52.

  2. Optimizing Process Loads in Industrial Cogeneration Energy Systems

    E-Print Network [OSTI]

    Ahner, D. J.; Babson, P. E.

    processes. AUTOMATION REQUIREMENTS The Operations energy Management System (OEMS) can require on-line operation using current measurements (e.g. flow, powers, temperatures, etc.), and calculating optimum energy purchase and equipment dispatch within...kW., A.. kW >- kW OPTIMIZING PROCESS LOADS IN INDUSTRIAL COGENERAnON ENERGY SYSTEMS DJ. Ahner Manager, Generation Technology Power Tecbnologies, Inc. Schenectady, New York ABSTRACT Optimum dispatcb of energy supply systems can...

  3. Current Generated Harmonics and Their Effect Upon Electrical Industrial Systems

    E-Print Network [OSTI]

    Alexander, H. R.; Rogge, D. S.

    of the nonlinear loads with respect to that system. The distortion increases as the percentage of nonlinear loads increases. (2) PROBLEMS ENCOUNTERED WITH HARMONICS High Neutral Conductor Currcnts Perhaps the dominant harmonic problem encountered... in commercial facilities and some industrial plants has been the overheating of neutral conductors of 3-phase, 4-wire branch and feeder distribution systems. In a balanced, 3-phase, 4-wire wye system with phase-to-ncutral linear loads, the neutral current...

  4. Market development directory for solar industrial process heat systems

    SciTech Connect (OSTI)

    None

    1980-02-01T23:59:59.000Z

    The purpose of this directory is to provide a basis for market development activities through a location listing of key trade associations, trade periodicals, and key firms for three target groups. Potential industrial users and potential IPH system designers were identified as the prime targets for market development activities. The bulk of the directory is a listing of these two groups. The third group, solar IPH equipment manufacturers, was included to provide an information source for potential industrial users and potential IPH system designers. Trade associates and their publications are listed for selected four-digit Standard Industrial Code (SIC) industries. Since industries requiring relatively lower temperature process heat probably will comprise most of the near-term market for solar IPH systems, the 80 SIC's included in this chapter have process temperature requirements less than 350/sup 0/F. Some key statistics and a location list of the largest plants (according to number of employees) in each state are included for 15 of the 80 SIC's. Architectural/engineering and consulting firms are listed which are known to have solar experience. Professional associated and periodicals to which information on solar IPH sytstems may be directed also are included. Solar equipment manufacturers and their associations are listed. The listing is based on the SERI Solar Energy Information Data Base (SEIDB).

  5. Cyber Security Testing and Training Programs for Industrial Control Systems

    SciTech Connect (OSTI)

    Daniel Noyes

    2012-03-01T23:59:59.000Z

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

  6. Aerogel-Based Insulation for Industrial Steam Distribution Systems

    SciTech Connect (OSTI)

    John Williams

    2011-03-30T23:59:59.000Z

    Thermal losses in industrial steam distribution systems account for 977 trillion Btu/year in the US, more than 1% of total domestic energy consumption. Aspen Aerogels worked with Department of Energy’s Industrial Technologies Program to specify, develop, scale-up, demonstrate, and deliver Pyrogel XT®, an aerogel-based pipe insulation, to market to reduce energy losses in industrial steam systems. The product developed has become Aspen’s best selling flexible aerogel blanket insulation and has led to over 60 new jobs. Additionally, this product has delivered more than ~0.7 TBTU of domestic energy savings to date, and could produce annual energy savings of 149 TBTU by 2030. Pyrogel XT’s commercial success has been driven by it’s 2-4X better thermal performance, improved durability, greater resistance to corrosion under insulation (CUI), and faster installation times than incumbent insulation materials.

  7. Expert system for testing industrial processes and determining sensor status

    DOE Patents [OSTI]

    Gross, K.C.; Singer, R.M.

    1998-06-02T23:59:59.000Z

    A method and system are disclosed for monitoring both an industrial process and a sensor. The method and system include determining a minimum number of sensor pairs needed to test the industrial process as well as the sensor for evaluating the state of operation of both. The technique further includes generating a first and second signal characteristic of an industrial process variable. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the pair of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 24 figs.

  8. Expert system for testing industrial processes and determining sensor status

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Singer, Ralph M. (Naperville, IL)

    1998-01-01T23:59:59.000Z

    A method and system for monitoring both an industrial process and a sensor. The method and system include determining a minimum number of sensor pairs needed to test the industrial process as well as the sensor for evaluating the state of operation of both. The technique further includes generating a first and second signal characteristic of an industrial process variable. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the pair of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test.

  9. Workload State Classification With Automation During Simulated

    E-Print Network [OSTI]

    Kaber, David B.

    Workload State Classification With Automation During Simulated Air Traffic Control David B. Kaber and Carlene M. Perry Edward P. Fitts Department of Industrial and Systems Engineering, North Carolina State to dynamically apply automation to information pro- cessing functions in aviation systems. This research examined

  10. Jacobi-Lie systems: fundamentals and low-dimensional classification

    E-Print Network [OSTI]

    F. J. Herranz; J. de Lucas; C. Sardon

    2014-11-30T23:59:59.000Z

    A Lie system is a system of differential equations describing the integral curves of a $t$-dependent vector field taking values in a finite-dimensional real Lie algebra of vector fields, a Vessiot-Guldberg Lie algebra. We define and analyze Lie systems possessing a Vessiot-Guldberg Lie algebra of Hamiltonian vector fields relative to a Jacobi manifold, the hereafter called Jacobi-Lie systems. We classify Jacobi-Lie systems on $\\mathbb{R}$ and $\\mathbb{R}^2$. Our results shall be illustrated through examples of physical and mathematical interest.

  11. PowerSystemsSimulation NSERC Industrial Research Chair in

    E-Print Network [OSTI]

    Chaudhary, Sanjay

    an offshore wind power plant to an onshore grid. To develop a PSCAD/EMTDC simulation model of an offshore WPPPowerSystemsSimulation NSERC Industrial Research Chair in Legends: 1. Without negative sequence, Aalborg Univ. and Univ. of Manitoba, email:skc@et.aau.dk A 400MW offshore wind power plant has been

  12. Startup of the experimental physics industrial control system at NSTX

    SciTech Connect (OSTI)

    Sichta, P.; Dong, J.

    1999-12-17T23:59:59.000Z

    The Experimental Physics Industrial Control System (EPICS) is a set of software which is being used as the basis of the National Spherical Torus Experiment's (NSTX) Process Control System, a major element of the NSTX's Central Instrumentation and Control System. EPICS is a result of a co-development effort started by several US Department of Energy National Laboratories. EPICS is actively supported through an international collaboration made up of government and industrial users. EPICS' good points include portability, scalability, and extensibility. A drawback for small experiments is that a wide range of software skills are necessary to get the software tools running for the process engineers. The authors' experience in designing, developing, operating, and maintaining NSTX's EPICS (system) will be reviewed.

  13. Agile Development and Dependency Management for Industrial Control Systems

    E-Print Network [OSTI]

    Copy, B

    2011-01-01T23:59:59.000Z

    The production and exploitation of industrial control systems differ substantially from traditional information systems; this is in part due to constraints on the availability and change lifecycle of production systems, as well as their reliance on proprietary protocols and software packages with little support for open development standards [1]. The application of agile software development methods therefore represents a challenge which requires the adoption of existing change and build management tools and approaches that can help bridging the gap and reap the benefits of managed development when dealing with industrial control systems. This paper will consider how agile development tools such as Apache Maven for build management, Hudson for continuous integration or Sonatype Nexus for the operation of "definite media libraries" were leveraged to manage the development lifecyle of the CERN UAB framework [2], as well as other crucial building blocks of the CERN accelerator infrastructure, such as the CERN Co...

  14. automated classification system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

  15. Dewey Decimal Classification System We are a worldwide library cooperative, owned, governed and sustained by members since 1967. Our public purpose

    E-Print Network [OSTI]

    Rodriguez, Carlos

    Dewey Decimal Classification System We are a worldwide library cooperative, owned, governed to reduce costs for libraries through collaboration. The world's most widely used classification system can used by libraries in 138 countries. The Dewey Decimal Classification® system continues to evolve

  16. Application of Expert Systems to Industrial Utility Equipment Optimization

    E-Print Network [OSTI]

    Hayes,S.; Burton,K.; O'Sullivan,D.

    2014-01-01T23:59:59.000Z

    have included Bayes belief networks (Lee 2001) (automotive FMEA). Rule-Based Systems. In (Bruton et al 2014), an AFDD tool was developed using a rule-based approach, with the intended goal of detecting faults and their causes in Air Handling Units... compressor,” Mechanical Systems and Signal Processing, 9(5), 485–496. Lee, B.H. (2001) “Using Bayes belief networks in industrial FMEA modeling and analysis,” Annual Reliability and Maintainability Symposium. 2001 Proceedings. International Symposium...

  17. Advanced Burners and Combustion Controls for Industrial Heat Recovery Systems

    E-Print Network [OSTI]

    Ferri, J. L.

    ADVANCED BURNERS AND COMBUSTION CONTROLS FOR INDUSTRIAL HEAT RECOVERY SYSTEMS J.L.FERRI GTE PRODUCTS CORPORATION TOWANDA, PA ABSTRACT When recuperators are installed on indus trial furnaces, burners and ratio control systems must...ChieVi able not only through design, but also I because the burner internals are all;: ceramic and can wi thstand high tempera~ tures, particularly at low inputs (higih turndown) where the flame front recedes into the burner. A burner test furnace...

  18. Sensor network based vehicle classification and license plate identification system

    SciTech Connect (OSTI)

    Frigo, Janette Rose [Los Alamos National Laboratory; Brennan, Sean M [Los Alamos National Laboratory; Rosten, Edward J [Los Alamos National Laboratory; Raby, Eric Y [Los Alamos National Laboratory; Kulathumani, Vinod K [WEST VIRGINIA UNIV.

    2009-01-01T23:59:59.000Z

    Typically, for energy efficiency and scalability purposes, sensor networks have been used in the context of environmental and traffic monitoring applications in which operations at the sensor level are not computationally intensive. But increasingly, sensor network applications require data and compute intensive sensors such video cameras and microphones. In this paper, we describe the design and implementation of two such systems: a vehicle classifier based on acoustic signals and a license plate identification system using a camera. The systems are implemented in an energy-efficient manner to the extent possible using commercially available hardware, the Mica motes and the Stargate platform. Our experience in designing these systems leads us to consider an alternate more flexible, modular, low-power mote architecture that uses a combination of FPGAs, specialized embedded processing units and sensor data acquisition systems.

  19. LED-Induced Fluorescence System for Tea Classification and Quality Assessment

    E-Print Network [OSTI]

    Dong, Yongjiang; Mei, Liang; Feng, Chao; Yan, Chunsheng; He, Sailing

    2013-01-01T23:59:59.000Z

    A fluorescence system is developed by using several light emitting diodes (LEDs) with different wavelengths as excitation light sources. The fluorescence detection head consists of multi LED light sources and a multimode fiber for fluorescence collection, where the LEDs and the corresponding filters can be easily chosen to get appropriate excitation wavelengths for different applications. By analyzing fluorescence spectra with the principal component analysis method, the system is utilized in the classification of four types of green tea beverages and two types of black tea beverages. Qualities of the Xihu Longjing tea leaves of different grades, as well as the corresponding liquid tea samples, are studied to further investigate the ability and application of the system in the evaluation of classification/quality of tea and other foods.

  20. ARKTOS: An intelligent system for SAR sea ice image classification

    E-Print Network [OSTI]

    Soh, L. K.; Tsatsoulis, Costas; Gineris, D.; Bertoia, C.

    2004-01-01T23:59:59.000Z

    We present an intelligent system for satellite sea ice image analysis named Advanced Reasoning using Knowledge for T ping Of Sea ice (ARKTOS). ARKTOS performs fully automated analysis of synthetic aperture radar (SAR) sea ice images by mimicking...

  1. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    iron and steel production. IEA Greenhouse Gas R&D Programme,tempera- ture range. IEA/Caddet, Sittard, The Netherlands.industry. Cheltenham, UK, IEA Greenhouse Gas R&D Programme,

  2. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    process residual like bagasse are now available (Cornland etsugar in- dustry uses bagasse and the edible oils industrySection 7.4.7. ). The use of bagasse for energy is likely to

  3. Visualization and Classification of Power System Frequency Data Streams

    SciTech Connect (OSTI)

    Bank, Jason N [ORNL; Omitaomu, Olufemi A [ORNL; Fernandez, Steven J [ORNL; Liu, Yilu [ORNL

    2009-01-01T23:59:59.000Z

    Two challenges in the realization of the smart grid technology are the ability to visualize the deluge of expected data streams for global situational awareness and the ability to detect disruptive and classify events from spatially-distributed high-speed power system frequency measurements while minimizing false alarms and eliminating missed detection. This paper presents an interactive visualization model for high speed power system frequency data streams that presents both local and global views of the data streams for decision making process. It also presents a K-Median for clustering and identifying disruptive events in spatially-distributed data streams. The results from experimental evaluation on a variety of datasets show that K-Median achieve better performance and empowers analysts with the ability to make sense of a deluge of frequency measurements in a real-time situation.

  4. Industry

    SciTech Connect (OSTI)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01T23:59:59.000Z

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  5. System for monitoring an industrial process and determining sensor status

    DOE Patents [OSTI]

    Gross, K.C.; Hoyer, K.K.; Humenik, K.E.

    1995-10-17T23:59:59.000Z

    A method and system for monitoring an industrial process and a sensor are disclosed. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 17 figs.

  6. System for monitoring an industrial process and determining sensor status

    DOE Patents [OSTI]

    Gross, K.C.; Hoyer, K.K.; Humenik, K.E.

    1997-05-13T23:59:59.000Z

    A method and system are disclosed for monitoring an industrial process and a sensor. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 17 figs.

  7. System for monitoring an industrial process and determining sensor status

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Hoyer, Kristin K. (Chicago, IL); Humenik, Keith E. (Columbia, MD)

    1995-01-01T23:59:59.000Z

    A method and system for monitoring an industrial process and a sensor. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test.

  8. System for monitoring an industrial process and determining sensor status

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Hoyer, Kristin K. (Chicago, IL); Humenik, Keith E. (Columbia, MD)

    1997-01-01T23:59:59.000Z

    A method and system for monitoring an industrial process and a sensor. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test.

  9. West Virginia University 1 Department of Industrial and Management Systems

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    in industrial engineering · Master of science in industrial hygiene · Master of science in safety management in the United States of having two complimentary graduate programs in industrial hygiene and safety accredited of a successful industrial engineer Masters of Science in Industrial Hygiene A graduate of the Industrial Hygiene

  10. Changing Trends in the Bulk Chemicals and Pulp and Paper Industries (released in AEO2005)

    Reports and Publications (EIA)

    2005-01-01T23:59:59.000Z

    Compared with the experience of the 1990s, rising energy prices in recent years have led to questions about expectations of growth in industrial output, particularly in energy-intensive industries. Given the higher price trends, a review of expected growth trends in selected industries was undertaken as part of the production of Annual Energy Outlook 2005 (AEO). In addition, projections for the industrial value of shipments, which were based on the Standard Industrial Classification (SIC) system in AEO2004, are based on the North American Industry Classification System (NAICS) in AEO2005. The change in industrial classification leads to lower historical growth rates for many industrial sectors. The impacts of these two changes are highlighted in this section for two of the largest energy-consuming industries in the U.S. industrial sector-bulk chemicals and pulp and paper.

  11. Classification of Geothermal Systems: A Possible Scheme | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformation SmyrnaNew York:Information Systems: A Possible Scheme

  12. Designing Optimal Heat and Power Systems for Industrial Processes

    E-Print Network [OSTI]

    Rutkowski, M. A.; Witherell, W. D.

    Power Research Institute (EPRI) of Palo Alto, California. In the paper, the use of Pinch Technology as a tool for analyzing industrial processes is demonstrated along with proper simulation of a corresponding heat and power system. For each process...Xisting design to determine improvement opportunities. INTRODUCTION This paper presents the results of a study conducted for the Electric Power Research Institute (EPRI) by Linnhoff March. The objective of this study was to develop a methodology...

  13. Information Technology Systems for Fusion Industry and ITER Project

    SciTech Connect (OSTI)

    Putvinskaya, N.; Bulasheva, N.; Cole, G.; Dillon, T.; Frieman, E.; Sabado, M.; Schissel, D. (and others)

    2005-04-15T23:59:59.000Z

    The industrial developments in the fusion industry will have to overcome numerous technical challenges and will have a strong need for modern information technology (IT) systems.The fusion industry has manifested itself with an unprecedented international collaboration, the International Thermonuclear Experimental Reactor (ITER). Data accumulated in ITER will be the major output of the project and will create the knowledge base for a future fusion power plant. A modern and effective information infrastructure will be critical to the success of the ITER project.To accumulate and maintain the knowledge base at all stages of the project, we propose to build an integrated information system for ITER: ITER Information Plant (IIP). IIP will minimize lost experiment time and accelerate the understanding, interpretation, and planning of fusion experiments. IIP will allow to reap maximum benefits from the project's scientific and technological achievements, make the ITER results accessible to hundreds of researchers worldwide. This will facilitate collaboration, dramatically increasing the pace of scientific and technological discovery and the rate at which practical use is made of these discoveries.As the first of its kind, the ITER Information Plant could be used in the future as a prototype IT system for national and international fusion projects, in which multicountry collaboration, distributed work sites and operations are catalysts for success.

  14. The development of a signal processing network for a real-time Arctic sea ice classification system

    E-Print Network [OSTI]

    Nordhaus, William D

    1973-01-01T23:59:59.000Z

    THE DEVELOPMENT OF A SIGNAL PROCESSING NETWORK FOR A REAL-TIME ARCTIC SEA ICE CLASSIFICATION SYSTEM A Thesis by WILLIAM DOUGLAS NORDHAUS Submitted to the Graduate College of Texas A)M University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE August 1973 Major Subject: Electrical Engineering THE DEVELOPMENT OF A SIGNAL PROCESSING NETWORK FOR A REAL-TIME ARCTIC SEA ICE CLASSIFICATION SYSTEM A Thesis by William Douglas Nordhaus Approved as to style...

  15. Net-Zero Energy Buildings: A Classification System Based on Renewable Energy Supply Options

    SciTech Connect (OSTI)

    Pless, S.; Torcellini, P.

    2010-06-01T23:59:59.000Z

    A net-zero energy building (NZEB) is a residential or commercial building with greatly reduced energy needs. In such a building, efficiency gains have been made such that the balance of energy needs can be supplied with renewable energy technologies. Past work has developed a common NZEB definition system, consisting of four well-documented definitions, to improve the understanding of what net-zero energy means. For this paper, we created a classification system for NZEBs based on the renewable sources a building uses.

  16. Implementation and Rejection of Industrial Steam System Energy Efficiency Measures

    SciTech Connect (OSTI)

    Therkelesen, Peter; McKane, Aimee

    2013-05-01T23:59:59.000Z

    Steam systems consume approximately one third of energy applied at U.S. industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of five years through the Energy Savings Assessment (ESA) program administered by the U.S. Department of Energy (U.S. DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well.

  17. The Joseph Bittorf Memorial Expendable Scholarship Fund in Industrial and Systems Engineering

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    The Joseph Bittorf Memorial Expendable Scholarship Fund in Industrial and Systems Engineering), with preference given to a sophomore-level student, majoring in Industrial and Systems Engineering at Northern in Industrial and Systems Engineering. Candidates must have a minimum cumulative GPA of 2.8 on a 4.0 grade

  18. The Joseph Bittorf Memorial Expendable Scholarship Fund in Industrial and Systems Engineering

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    The Joseph Bittorf Memorial Expendable Scholarship Fund in Industrial and Systems Engineering 2012), with preference given to a sophomore-level student, majoring in Industrial and Systems Engineering at Northern be a declared major in Industrial and Systems Engineering. Candidates must have a minimum cumulative GPA of 2

  19. Enforcing Safety Requirements for Industrial Automation Systems at Runtime Position Paper

    E-Print Network [OSTI]

    Enforcing Safety Requirements for Industrial Automation Systems at Runtime Position Paper Wikan {firstname.lastname}@tuwien.ac.at Abstract--Current industrial automation systems are becom- ing more safety requirements of industrial automation systems may lead to high risks if not addressed properly

  20. Context-based automated defect classification system using multiple morphological masks

    DOE Patents [OSTI]

    Gleason, Shaun S. (Knoxville, TN); Hunt, Martin A. (Knoxville, TN); Sari-Sarraf, Hamed (Lubbock, TX)

    2002-01-01T23:59:59.000Z

    Automatic detection of defects during the fabrication of semiconductor wafers is largely automated, but the classification of those defects is still performed manually by technicians. This invention includes novel digital image analysis techniques that generate unique feature vector descriptions of semiconductor defects as well as classifiers that use these descriptions to automatically categorize the defects into one of a set of pre-defined classes. Feature extraction techniques based on multiple-focus images, multiple-defect mask images, and segmented semiconductor wafer images are used to create unique feature-based descriptions of the semiconductor defects. These feature-based defect descriptions are subsequently classified by a defect classifier into categories that depend on defect characteristics and defect contextual information, that is, the semiconductor process layer(s) with which the defect comes in contact. At the heart of the system is a knowledge database that stores and distributes historical semiconductor wafer and defect data to guide the feature extraction and classification processes. In summary, this invention takes as its input a set of images containing semiconductor defect information, and generates as its output a classification for the defect that describes not only the defect itself, but also the location of that defect with respect to the semiconductor process layers.

  1. NREL: Energy Systems Integration - NREL Handbook Helps Industry...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Handbook Helps Industry Collect and Interpret Solar Resource Data for Solar Energy Applications Comprehensive handbook is a valuable resource for the solar industry on the...

  2. Improving Process Heating System Performance: A Sourcebook for Industry, Second Edition

    SciTech Connect (OSTI)

    Not Available

    2008-02-01T23:59:59.000Z

    This is one in a series of sourcebooks to help manufacturers optimize their industrial systems; this particular sourcebook addresses process heating systems.

  3. Nanocoatings for High-Efficiency Industrial Hydraulic and Tooling Systems

    SciTech Connect (OSTI)

    Clifton B. Higdon III

    2011-01-07T23:59:59.000Z

    Industrial manufacturing in the U.S. accounts for roughly one third of the 98 quadrillion Btu total energy consumption. Motor system losses amount to 1.3 quadrillion Btu, which represents the largest proportional loss of any end-use category, while pumps alone represent over 574 trillion BTU (TBTU) of energy loss each year. The efficiency of machines with moving components is a function of the amount of energy lost to heat because of friction between contacting surfaces. The friction between these interfaces also contributes to downtime and the loss of productivity through component wear and subsequent repair. The production of new replacement parts requires additional energy. Among efforts to reduce energy losses, wear-resistant, low-friction coatings on rotating and sliding components offer a promising approach that is fully compatible with existing equipment and processes. In addition to lubrication, one of the most desirable solutions is to apply a protective coating or surface treatment to rotating or sliding components to reduce their friction coefficients, thereby leading to reduced wear. Historically, a number of materials such as diamond-like carbon (DLC), titanium nitride (TiN), titanium aluminum nitride (TiAlN), and tungsten carbide (WC) have been examined as tribological coatings. The primary objective of this project was the development of a variety of thin film nanocoatings, derived from the AlMgB14 system, with a focus on reducing wear and friction in both industrial hydraulics and cutting tool applications. Proof-of-concept studies leading up to this project had shown that the constituent phases, AlMgB14 and TiB2, were capable of producing low-friction coatings by pulsed laser deposition. These coatings combine high hardness with a low friction coefficient, and were shown to substantially reduce wear in laboratory tribology tests. Selection of the two applications was based largely on the concept of improved mechanical interface efficiencies for energy conservation. In mobile hydraulic systems, efficiency gains through low friction would translate into improved fuel economy and fewer greenhouse gas emissions. Stationary hydraulic systems, accordingly, would consume less electrical power. Reduced tooling wear in machining operations would translate to greater operating yields, while lowering the energy consumed during processing. The AlMgB14 nanocoatings technology progressed beyond baseline laboratory tests into measurable energy savings and enhancements to product durability. Three key hydraulic markets were identified over the course of the project that will benefit from implementation: industrial vane pumps, orbiting valve-in-star hydraulic motors, and variable displacement piston pumps. In the vane pump application, the overall product efficiency was improved by as much as 11%. Similar results were observed with the hydraulic motors tested, where efficiency gains of over 10% were noted. For variable displacement piston pumps, overall efficiency was improved by 5%. For cutting tools, the most significant gains in productivity (and, accordingly, the efficiency of the machining process as a whole) were associated with the roughing and finishing of titanium components for aerospace systems. Use of the AlMgB14 nanocoating in customer field tests has shown that the coated tools were able to withstand machining rates as high as 500sfm (limited only by the substrate material), with relatively low flank wear when compared to other industrial offerings. AlMgB14 coated tools exhibited a 60% improvement over similarly applied TiAlN thin films. Furthermore, AlMgB14-based coatings in these particular tests lasted twice as long than their TiAlN counterparts at the 500sfm feed rates. Full implementation of the technology into the industrial hydraulic and cutting tool markets equates to a worldwide energy savings of 46 trillion BTU/year by 2030. U.S.-based GHG emissions associated with the markets identified would fall accordingly, dropping by as much as 50,000 tonnes annually.

  4. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    Schleich, J. , 2004: Do energy audits help reduce barriersof organizational barriers. Energy audit and managementa; US EPA, n.d. ). Energy Audits and Management Systems.

  5. Department of Industrial Engineering and Management Systems Page 1 Course Title

    E-Print Network [OSTI]

    Foroosh, Hassan

    EIN6258 Human-Computer Interaction R 24 22 EIN6264C Industrial Hygiene X 24 23 EIN6270C WorkDepartment of Industrial Engineering and Management Systems Page 1 Course Title Required On Engineering/Administration 24 9 EIN4243C Human Engineering R 24 10 EIN4333C Industrial Control Systems R

  6. Automated Tuning of a Vision-based Inspection System for Industrial Food Manufacturing

    E-Print Network [OSTI]

    Payeur, Pierre

    Automated Tuning of a Vision-based Inspection System for Industrial Food Manufacturing Mai Moussa. INTRODUCTION For several years, the food industry has adopted automated vision-based inspection systems Ottawa, Canada [m.chetima, ppayeur]@uottawa.ca Abstract--Quality control in industrial food manufacturing

  7. Analyzing Software Evolvability of an Industrial Automation Control System: A Case Study

    E-Print Network [OSTI]

    Becker, Steffen

    Analyzing Software Evolvability of an Industrial Automation Control System: A Case Study Hongyu Pei and improving the evolvability of an industrial automation control system, and presents 1) evolvability Breivold1 , Ivica Crnkovic2 , Rikard Land2 , Magnus Larsson1 1 ABB Corporate Research, Industrial Software

  8. Assessment of an Industrial Wet Oxidation System for Burning Waste and Low-Grade Fuels 

    E-Print Network [OSTI]

    Bettinger, J.; Koppel, P.; Margulies, A.

    1988-01-01T23:59:59.000Z

    "Stone & Webster Engineering Corporation, under Department of Energy sponsorship, is developing a wet oxidation system to generate steam for industrial processes by burning industrial waste materials and low-grade fuels. The program involves...

  9. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    driven systems; high efficiency boilers and process heaters;aims to develop boilers with an efficiency of 94%. However,much lower. Efficiency measures exist for both boilers and

  10. Understanding and reducing energy and costs in industrial cooling systems

    E-Print Network [OSTI]

    Muller, M.R.; Muller, M.B.

    2012-01-01T23:59:59.000Z

    Industrial cooling remains one of the largest potential areas for electrical energy savings in industrial plants today. This is in spite of a relatively small amount of attention paid to it by energy auditors and rebate program designers. US DOE...

  11. Secure Data Transfer Guidance for Industrial Control and SCADA Systems

    SciTech Connect (OSTI)

    Mahan, Robert E.; Fluckiger, Jerry D.; Clements, Samuel L.; Tews, Cody W.; Burnette, John R.; Goranson, Craig A.; Kirkham, Harold

    2011-09-01T23:59:59.000Z

    This document was developed to provide guidance for the implementation of secure data transfer in a complex computational infrastructure representative of the electric power and oil and natural gas enterprises and the control systems they implement. For the past 20 years the cyber security community has focused on preventative measures intended to keep systems secure by providing a hard outer shell that is difficult to penetrate. Over time, the hard exterior, soft interior focus changed to focus on defense-in-depth adding multiple layers of protection, introducing intrusion detection systems, more effective incident response and cleanup, and many other security measures. Despite much larger expenditures and more layers of defense, successful attacks have only increased in number and severity. Consequently, it is time to re-focus the conventional approach to cyber security. While it is still important to implement measures to keep intruders out, a new protection paradigm is warranted that is aimed at discovering attempted or real compromises as early as possible. Put simply, organizations should take as fact that they have been, are now, or will be compromised. These compromises may be intended to steal information for financial gain as in the theft of intellectual property or credentials that lead to the theft of financial resources, or to lie silent until instructed to cause physical or electronic damage and/or denial of services. This change in outlook has been recently confirmed by the National Security Agency [19]. The discovery of attempted and actual compromises requires an increased focus on monitoring events by manual and/or automated log monitoring, detecting unauthorized changes to a system's hardware and/or software, detecting intrusions, and/or discovering the exfiltration of sensitive information and/or attempts to send inappropriate commands to ICS/SCADA (Industrial Control System/Supervisory Control And Data Acquisition) systems.

  12. industrial & Systems Engineers Engineer Systems The challenge is in how you can manage complexity to solve your problem.

    E-Print Network [OSTI]

    Chaudhuri, Sanjay

    industrial & Systems Engineers Engineer Systems The challenge is in how you can manage complexity of Industrial & Systems Engineering http://www.ise.nus.edu.sg/Sye http://www.facebook.com/ise.nus #12;The to solve your problem. Only Systems Engineering tools and techniques can effectively address complexity

  13. Designing a Mobile Collaborative System for Navigating and Reviewing Oil Industry CAD Models

    E-Print Network [OSTI]

    Barbosa, Alberto

    Designing a Mobile Collaborative System for Navigating and Reviewing Oil Industry CAD Models navigating and reviewing 3D engineering models, applied to the oil industry. Together with professional oil industry engineers from a large oil company, a team of HCI researchers per- formed task analysis

  14. Suggested Courses for ME Students Interested in Industrial and Systems Engineering Required Courses

    E-Print Network [OSTI]

    Virginia Tech

    (3H,3C) ISE 4654: Principles of Industrial Hygiene Introduction to the foundations of the field of Industrial Hygiene, that discipline devoted to the anticipation, recognition, measurement, evaluation Suggested Courses for ME Students Interested in Industrial and Systems Engineering Required

  15. A CONTROL SYSTEM FOR TOBACCO SHRED PRODUCTION LINE BASED ON INDUSTRIAL

    E-Print Network [OSTI]

    quality insurance (Sun Xin, 2007). The Rockwell Automation Company introduced a new industrial EthernetA CONTROL SYSTEM FOR TOBACCO SHRED PRODUCTION LINE BASED ON INDUSTRIAL ETHERNET Li Zhang1 , Guang Industrial Corporation, Nanyang, He Nan, China, 473000 * Corresponding author, Address: College

  16. Control Engineering Practice 10 (2002) 615624 Stabilizer design for industrial co-generation systems

    E-Print Network [OSTI]

    Marquez, Horacio J.

    2002-01-01T23:59:59.000Z

    design; HN optimization; Co-generation systems; Boiler control; Industrial applications 1. Introduction temperature. A simple diagram of the current boiler control system is shown in Fig. 2. From a control systems

  17. Combustion System Development for Medium-Sized Industrial Gas Turbines: Meeting Tight Emission Regulations while Using

    E-Print Network [OSTI]

    Ponce, V. Miguel

    Combustion System Development for Medium-Sized Industrial Gas Turbines: Meeting Tight Emission and the oil & gas industries. The combustion system used in Solar's products are discussed along- bility for the introduction of new combustion systems for gas turbine products to enhance fuel

  18. DEVELOPMENT OF AN AUTOMATIC DESIGN AND OPTIMIZATION SYSTEM FOR INDUSTRIAL SILENCERS

    E-Print Network [OSTI]

    Wang, Gaofeng Gary

    life-cycle costs, is not fully supported. This work documents the development of an automatic design1 DEVELOPMENT OF AN AUTOMATIC DESIGN AND OPTIMIZATION SYSTEM FOR INDUSTRIAL SILENCERS Lee Ming Wong and optimization system for industrial silencers. The developed system greatly reduces the production costs

  19. New Advanced System Utilizes Industrial Waste Heat to Power Water...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is crucial to ensuring their status as global competitors. Currently, most industries treat water to meet standards for direct discharge to surface water. The process includes a...

  20. Advanced, Energy-Efficient Hybrid Membrane System for Industrial...

    Energy Savers [EERE]

    (1 slide) Develo Project Objecve Current StateChallenges Heavy industrial water utilization footprint Freshwater Withdrawals in the U.S. by Sector (2005) Domestic...

  1. West Virginia University 1 Department of Industrial & Management Systems

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    -mail: Statler-IMSE@mail.wvu.edu Degree Offered · Bachelor of Science in Industrial Engineering (B.S.I.E.) Nature the needs of West Virginia, the nation, and the world. The industrial engineering students at WVU are taught to draw upon specialized knowledge and skills in the mathematical, physical, and social sciences, together

  2. The Systems Science & Industrial Engineering (SSIE) Department and The Thomas J. Watson School of Engineering and Applied

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    The Systems Science & Industrial Engineering (SSIE) Department and The Thomas J. Watson School professionals, we will open the doors to demonstrate what industrial and systems engineers can contribute to any. We offer the BS degree in industrial and systems engineering (ISE), MEng degree in industrial

  3. Improving Steam System Performance: A Sourcebook for Industry, Second Edition (Book) (Revised)

    SciTech Connect (OSTI)

    Not Available

    2012-10-01T23:59:59.000Z

    Improving Steam System Performance: A Sourcebook for Industry was developed for the U.S. Department of Energy's (DOE) Advanced Manufacturing Office (AMO), formerly the Industrial Technologies Program. AMO undertook this project as a series of sourcebook publications. Other topics in this series include: compressed air systems, pumping systems, fan systems, process heating and motor and drive systems. For more information about program resources, see AMO in the Where to Find Help section of this publication.

  4. Chemical resistance determination test scheme and rating system development for industrial glove evaluation

    E-Print Network [OSTI]

    Cornils, William Joseph

    1981-01-01T23:59:59.000Z

    CHEMICAL RESISTANCE DETERMINATION TEST SCHEME AND RATING SYSTEM DEVELOPMENT FOR INDUSTRIAL GLOVE EVALUATION A Thesis by WILLIAM JOSEPH CORNILS Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1981 Major Subject: Industrial Hygiene CHEMICAL RESISTANCE DETERMINATION TEST SCHEME AND RATING SYSTEM DEVELOPMENT FOR INDUSTRIAL GLOVE EVALUATION A Thesis by WILLIAM JOSEPH CORNILS Approved...

  5. Model documentation report: Industrial sector demand module of the National Energy Modeling System

    SciTech Connect (OSTI)

    NONE

    1997-01-01T23:59:59.000Z

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects. The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2015) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of industrial output. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  6. Impact of Control System Technologies on Industrial Energy Savings

    E-Print Network [OSTI]

    Parikh, P.; Pasmussen, B. P.

    2014-01-01T23:59:59.000Z

    to 2010 Image: U.S. Energy Information Administration's (EIA) Manufacturing Energy Consumption Survey (MECS) ESL-IE-14-05-40 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 INDUSTRIAL ENERGY... CONSUMPTION However, there’s still a need to look for newer energy saving ideas Image: U.S. Energy Information Administration's (EIA) http://www.eia.gov/forecasts/ieo/industrial.cfm Fresher energy saving ideas can be realized by focusing on the Control...

  7. Automatic Synthesis of Control Software for an Industrial Automation Control System

    E-Print Network [OSTI]

    Tronci, Enrico

    Automatic Synthesis of Control Software for an Industrial Automation Control System Enrico Tronci1 experimental results show that for industrial au- tomation control systems automatic synthesis is a viable@univaq.it, http: univaq.it tronci Abstract We present a case study on automatic synthesis of control software from

  8. MIT and Marine Systems and Ocean Science & Engineering MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    ; shipping and transportation; ocean energy; ocean acoustics; the role of the ocean in the global environmentMIT and Marine Systems and Ocean Science & Engineering MIT Industry Brief MIT's Industrial Liaison of Technology (MIT) is a leading center of research and education on topics related to marine systems, and ocean

  9. Modeling and identification of parallel nonlinear systems: Structural classification and parameter estimation methods

    SciTech Connect (OSTI)

    Chen, H.W. (Los Alamos National Lab., NM (United States). Biophysics Group M715)

    1995-01-01T23:59:59.000Z

    Structural classification and parameter estimation (SCPE) methods are used for studying single-input single-output (SISO) parallel linear-nonlinear-linear (LNL), linear-nonlinear (LN), and nonlinear-linear (NL) system models from input-output (I-O) measurements. The uniqueness of the I-O mappings (see the definition of the I-O mapping in Section 3-A) of some model structures is discussed. The uniqueness of the I-O mappings (see the definition of the I-O mapping in Section 3-A) of some model structures is discussed. The uniqueness of I-O mappings of different models tells them in what conditions different model structures can be differentiated from one another. Parameter uniqueness of the I-O mapping of a given structural model is also discussed, which tells the authors in what conditions a given model's parameters can be uniquely estimated from I-O measurements. These methods are then generalized so that they can be used to study single-input multi-output (SIMO), multi-input single-output (MISO), as well as multi-input multi-output (MIMO) nonlinear system models. Parameter estimation of the two-input single-output nonlinear system model (denoted as the 2f-structure in 2 cited references), which was left unsolved previously, can now be obtained using the newly derived algorithms. Applications of SCPE methods for modeling visual cortical neurons, system fault detection, modeling and identification of communication networks, biological systems, and natural and artificial neural networks are also discussed. The feasibility of these methods is demonstrated using simulated examples. SCPE methods presented in this paper can be further developed to study more complicated block-structures models, and will therefore have future potential for modeling and identifying highly complex multi-input multi-output nonlinear systems.

  10. Special Coating Emission Control System At Goulds Pumps ITT Industries

    E-Print Network [OSTI]

    Caropolo, B.; Evans, T.

    The Clean Air Act Amendments of 1990 required significant changes for users of industrial paints and coatings. New York State requires users of highly volatile coatings to meet additional regulations, and apply for special permits and variances...

  11. Special Coating Emission Control System At Goulds Pumps ITT Industries 

    E-Print Network [OSTI]

    Caropolo, B.; Evans, T.

    2001-01-01T23:59:59.000Z

    The Clean Air Act Amendments of 1990 required significant changes for users of industrial paints and coatings. New York State requires users of highly volatile coatings to meet additional regulations, and apply for special permits and variances...

  12. Expert Systems For Management Training In The Construction Industry 

    E-Print Network [OSTI]

    Saoud, Ehab AB

    The construction industry is based on age old skills where 'man' has been the builder and is coupled to his creative ability and skilled craftsmanship. This significant dependency on human resources continues to this day ...

  13. "Greening" Industrial Steam Generation via On-demand Steam Systems 

    E-Print Network [OSTI]

    Smith, J. P.

    2010-01-01T23:59:59.000Z

    Both recent economic and environmental conditions in the U.S. have converged to bring about unprecedented attention to energy efficiency and sustainability in the country's industrial sector. Historically, energy costs in ...

  14. The Industrial Power Plant Management System - An Engineering Approach

    E-Print Network [OSTI]

    Aarnio, S. E.; Tarvainen, H. J.; Tinnis, V.

    1979-01-01T23:59:59.000Z

    Based on energy studies in over 70 plants in the forest products industry, experience has shown that, in addition to process improvements, the most important energy conservation measures in mill power departments are: - Load shedding and fuel...

  15. INDUSTRIAL ENERGY DATA COLLECTION EXISTING SYSTEM AND PROPOSED FUTURE

    E-Print Network [OSTI]

    .4 Hydro Quebec 14 5.5 Energy Research Group, Simon Fraser University 14 5.6 CANMET 15 #12;Industrial. INDUSTRIAL PRIMARY ENERGY DATA COLLECTION FORMATS 27 9.1 Energy Audits 27 9.1.1 Methodology 29 9.1.2 Steps Involved in an Energy Audit 30 9.2 Surveys 31 9.2.1 Detailed Site Energy End-use Survey 32 9.2.2 Equipment

  16. Process Waste Heat Recovery in the Food Industry - A System Analysis

    E-Print Network [OSTI]

    Lundberg, W. L.; Mutone, G. A.

    1983-01-01T23:59:59.000Z

    An analysis of an industrial waste heat recovery system concept is discussed. For example purposes, a food processing plant operating an ammonia refrigeration system for storage and blast freezing is considered. Heat is withdrawn from...

  17. Evaluation of Advanced PSA and Oxygen Combustion System for Industrial Furnace Applications

    E-Print Network [OSTI]

    Delano, M. A.; Lagree, D.; Kwan, Y.

    M. A. Delano Union Carbide Corp. Tarrytown, NY ABSTRACT EVALUATION OF ADVANCED PSA AND OXYGEN COMBUSTION SYSTEM FOR INDUSTRIAL FURNACE APPLICATIONS D. Lagree Union Carbide Corp. Tonawanda, NY The performance of a pilot scale advanced PSA... oxygen generation system and a low NO x oxygen burner was evaluated for industrial furnace applications. The PSA system employs a two-bed vacuum cycle design with a capacity of 1.3 TPD at 90% O 2 purity. The oxygen generated from the PSA system...

  18. Nanocoatings for High-Efficiency Industrial and Tooling Systems

    SciTech Connect (OSTI)

    Blau, P; Qu, J.; Higdon, C. (Eaton Corporation)

    2011-02-01T23:59:59.000Z

    This industry-driven project was the result of a successful response by Eaton Corporation to a DOE/ITP Program industry call. It consisted of three phases in which ORNL participated. In addition to Eaton Corporation and ORNL (CRADA), the project team included Ames Laboratory, who developed the underlying concept for aluminum-magnesium-boron based nanocomposite coatings [1], and Greenleaf, a small tooling manufacturer in western Pennsylvania. This report focuses on the portion of this work that was conducted by ORNL in a CRADA with Eaton Corporation. A comprehensive final report for the entire effort, which ended in September 2010, has been prepared by Eaton Corporation. Phase I, “Proof of Concept” ran for one year (September 1, 2006 to September 30, 2007) during which the applicability of AlMgB14 single-phase and nanocomposite coatings on hydraulic material coupons and components as well as on tool inserts was demonstrated.. The coating processes used either plasma laser deposition (PLD) or physical vapor deposition (PVD). During Phase I, ORNL conducted laboratory-scale pin-on-disk and reciprocating pin-on-flat tests of coatings produced by PLD and PVD. Non-coated M2 tool steel was used as a baseline for comparison, and the material for the sliding counterface was Type 52100 bearing steel since it simulated the pump materials. Initial tests were run mainly in a commercial hydraulic fluid named Mobil DTE-24, but some tests were later run in a water-glycol mixture as well. A tribosystem analysis was conducted to define the operating conditions of pump components and to help develop simulative tests in Phase II. Phase II, “Coating Process Scale-up” was intended to use scaled-up process to generate prototype parts. This involved both PLD practices at Ames Lab, and a PVD scale-up study at Eaton using its production capable equipment. There was also a limited scale-up study at Greenleaf for the tooling application. ORNL continued to conduct friction and wear tests on process variants and developed tests to better simulate the applications of interest. ORNL also employed existing lubrication models to better understand hydraulic pump frictional behavior and test results. Phase III, “Functional Testing” focused on finalizing the strategy for commercialization of AlMgB14 coatings for both hydraulic and tooling systems. ORNL continued to provide tribology testing and analysis support for hydraulic pump applications. It included both laboratory-scale coupon testing and the analysis of friction and wear data from full component-level tests performed at Eaton Corp. Laboratory-scale tribology test methods are used to characterize the behavior of nanocomposite coatings prior to running them in full-sized hydraulic pumps. This task also includes developing tribosystems analyses, both to provide a better understanding of the performance of coated surfaces in alternate hydraulic fluids, and to help design useful laboratory protocols. Analysis also includes modeling the lubrication conditions and identifying the physical processes by which wear and friction of the contact interface changes over time. This final report summarizes ORNL’s portion of the nanocomposite coatings development effort and presents both generated data and the analyses that were used in the course of this effort.

  19. Security classification of information

    SciTech Connect (OSTI)

    Quist, A.S.

    1993-04-01T23:59:59.000Z

    This document is the second of a planned four-volume work that comprehensively discusses the security classification of information. The main focus of Volume 2 is on the principles for classification of information. Included herein are descriptions of the two major types of information that governments classify for national security reasons (subjective and objective information), guidance to use when determining whether information under consideration for classification is controlled by the government (a necessary requirement for classification to be effective), information disclosure risks and benefits (the benefits and costs of classification), standards to use when balancing information disclosure risks and benefits, guidance for assigning classification levels (Top Secret, Secret, or Confidential) to classified information, guidance for determining how long information should be classified (classification duration), classification of associations of information, classification of compilations of information, and principles for declassifying and downgrading information. Rules or principles of certain areas of our legal system (e.g., trade secret law) are sometimes mentioned to .provide added support to some of those classification principles.

  20. Preliminary Results from the Industrial Steam System Market Assessment

    E-Print Network [OSTI]

    McGrath, G. P.; Wright, A. L.

    /0353, Gas Research Institute, September 1996. [3] Scoping Study Pulp and Paper Industry, EPRI, Prepared by Giese & Associates, December 1988. [4] Directory ojthe Pulp, Paper, and Allied Trades, Lockwood Post, 1996. [5] 1992 Industrial Process Heat...,000 2,400 5500 18400 38500 Mechanical 8.000 25000 6.500 17,200 14,500 42,000 Sulfite semi-chemical 17,000 35,000 4,100 6,800 21,000 41.800 Chemi-thermal mechanical 9,000 25,000 7500 16,400 16,500 41,400 Thousand Btusfton Table 4. Pulp and Paper...

  1. The Fundamental Properties of Galaxies and a New Galaxy Classification System

    E-Print Network [OSTI]

    Christopher J. Conselice

    2006-11-04T23:59:59.000Z

    We present in this paper a new three-dimensional galaxy classification system designed to account for the diversity of galaxy properties in the nearby universe. To construct this system we statistically analyse a sample of >22,000 galaxies at v<15,000 km/s (z<0.05) with Spearman rank and principal component analyses. Fourteen major galaxy properties are considered, including: Hubble type, size, colour, surface brightness, magnitude, stellar mass, internal velocities, HI gas content, and an index that measures dynamical disturbances. We find, to a high degree, that most galaxy properties are correlated, with in particular Hubble type, colour, and stellar mass all strongly related. We argue that this tight 3-way correlation is a result of evolutionary processes that depend on galaxy mass, as we show that the relation between colour and mass is independent of Hubble type. Various principal component analyses reveal that most of the variation in nearby galaxy properties can be accounted for by eigenvectors dominated by: (i) the scale of a galaxy, such as its stellar mass, (ii) the spectral type, and (iii) the degree of dynamical disturbances. We suggest that these three properties: mass, star formation, and interactions/mergers are the major features that determine a galaxy's physical state, and should be used to classify galaxies. As shown in Conselice (2003), these properties are measurable within the CAS (concentration, asymmetry, clumpiness) structural system, thus providing an efficient mechanism for classifying galaxies in optical light within a physical meaningful framework. We furthermore discuss the fraction and number density of galaxies in the nearby universe as a function of Hubble type, for comparison with higher redshift populations.

  2. Impact of Passive Safety on FHR Instrumentation Systems Design and Classification

    SciTech Connect (OSTI)

    Holcomb, David Eugene [ORNL

    2015-01-01T23:59:59.000Z

    Fluoride salt-cooled high-temperature reactors (FHRs) will rely more extensively on passive safety than earlier reactor classes. 10CFR50 Appendix A, General Design Criteria for Nuclear Power Plants, establishes minimum design requirements to provide reasonable assurance of adequate safety. 10CFR50.69, Risk-Informed Categorization and Treatment of Structures, Systems and Components for Nuclear Power Reactors, provides guidance on how the safety significance of systems, structures, and components (SSCs) should be reflected in their regulatory treatment. The Nuclear Energy Institute (NEI) has provided 10 CFR 50.69 SSC Categorization Guideline (NEI-00-04) that factors in probabilistic risk assessment (PRA) model insights, as well as deterministic insights, through an integrated decision-making panel. Employing the PRA to inform deterministic requirements enables an appropriately balanced, technically sound categorization to be established. No FHR currently has an adequate PRA or set of design basis accidents to enable establishing the safety classification of its SSCs. While all SSCs used to comply with the general design criteria (GDCs) will be safety related, the intent is to limit the instrumentation risk significance through effective design and reliance on inherent passive safety characteristics. For example, FHRs have no safety-significant temperature threshold phenomena, thus, enabling the primary and reserve reactivity control systems required by GDC 26 to be passively, thermally triggered at temperatures well below those for which core or primary coolant boundary damage would occur. Moreover, the passive thermal triggering of the primary and reserve shutdown systems may relegate the control rod drive motors to the control system, substantially decreasing the amount of safety-significant wiring needed. Similarly, FHR decay heat removal systems are intended to be running continuously to minimize the amount of safety-significant instrumentation needed to initiate operation of systems and components important to safety as required in GDC 20. This paper provides an overview of the design process employed to develop a pre-conceptual FHR instrumentation architecture intended to lower plant capital and operational costs by minimizing reliance on expensive, safety related, safety-significant instrumentation through the use of inherent passive features of FHRs.

  3. Applications of Ontologies for Assembling Simulation Models of Industrial Systems

    E-Print Network [OSTI]

    -automated semantic engine that assembles the simulation model. We represent a structure of a real industrial plant in a plant ontology and available simulation blocks in a simulation ontology. Signals of each simulation critical scenarios of nuclear power plants [9]. As some real experiments cannot be repeated under the same

  4. "Greening" Industrial Steam Generation via On-demand Steam Systems

    E-Print Network [OSTI]

    Smith, J. P.

    2010-01-01T23:59:59.000Z

    impact have not kept pace with other industrialized nations. The U.S. is confronted with looming tipping points with respect to energy supply and GHG emissions that represent very tangible constraints on future economic growth and quality of life. A...

  5. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: BUILDING MECHANIC II (Pay, parking lots, elevators, snow conditions, HVAC equipment temperature control systems, pool systems, ice

  6. Control of Discrete Event Systems with Respect to Strict Duration: Supervision of an Industrial

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    temporal constraint, the thermal treatment of rubber parts for the automotive industries. Supervisors are calculated and classified ac- cording to their performance, considering their impact on the production- cated to industrial production systems. Many approaches have been proposed for the analysis of DES

  7. Wireless Ventilation Control for Large-Scale Systems: the Mining Industrial Case

    E-Print Network [OSTI]

    Boyer, Edmond

    Wireless Ventilation Control for Large-Scale Systems: the Mining Industrial Case E. Witrant1,, A. D, for large scale systems with high environmental impact: the mining ventilation control systems. Ventilation). We propose a new model for underground ventilation. The main components of the system dynamics

  8. For further information, please contact: Department of Industrial and Systems

    E-Print Network [OSTI]

    Chaudhuri, Sanjay

    with the design and management of production and service systems to achieve competitive performance by optimizing examples are: MANUFACTURING/ ENGINEERING Job Scope: · Process Improvement · Systems Integration · Quality/ ENGINEERING PUBLIC SECTOR SERVICE Job Scope: · Management Consultancy · Systems Integration · Six Sigma

  9. Cost-Effective Gas-Fueled Cooling Systems for Commercial/Industrial Buildings and Process Applications

    E-Print Network [OSTI]

    Lindsay, B. B.

    Gas Research Institute initiated a program in 1985 to develop cost-effective gas engine-driven cooling systems for commercial and industrial applications. Tecogen, Inc., has designed, fabricated, and tested a nominal 150-ton engine-driven water...

  10. The Canadian Energy Information System - An Aid and Opportunity for Industry 

    E-Print Network [OSTI]

    McNeil, C. S. L.

    1981-01-01T23:59:59.000Z

    More than ever before, industry needs sound, succinct information on energy options and opportunities. As one answer to this need, the Canadian Energy Information System provides comprehensive continent-wide distribution of information and fast...

  11. Power Quality/Harmonic Detection: Harmonic Control in Electric Power Systems for the Telecommunications Industry

    E-Print Network [OSTI]

    Felkner, L. J.; Waggoner, R. M.

    The control of harmonics in power systems continues to be a major concern in the telecommunications industry. AC/DC telecommunication conversion equipment has rarely been thought of as playing a major role in the harmonic interaction problem. Yet...

  12. NETL's High-Speed Imaging System Successfully Applied in Medicine, Broad Spectrum of Industry

    Broader source: Energy.gov [DOE]

    A groundbreaking Department of Energy-developed imaging system originally designed to help create cleaner fossil energy processes is finding successful applications in a wide range of medical, chemical processing, energy, and other industries.

  13. Research in Industrial Combustion Systems - Current and Future R&D 

    E-Print Network [OSTI]

    Rebello, W. J.; Keller, J. G.

    1987-01-01T23:59:59.000Z

    of the future research needs in industrial combustion systems have been identified. These include improved techniques of heat transfer to the load, improved sensors, plasmas to process materials and flash or pneumatic reactors for the metals, non-metals...

  14. Update on Energy Saving Opportunities in Industrial Electrical Power Systems

    E-Print Network [OSTI]

    Frasure, J. W.; Fredericks, C. J.

    + amortization) AC resistance for this cable is approximately .20 ohms per thousand feet. Assuming a 20% ROI and a 20 year cable life, the equation reduces on a per foot basis to the following: (3 x r 2 x (.20/1000) x .001 x 7900)(.05) ($4.48)(.20 + .05... be justified to lower these losses. 788 ESL-IE-86-06-129 Proceedings from the Eighth Annual Industrial Energy Technology Conference, Houston, TX, June 17-19, 1986 Less well known is the magnitude and expense of losses in AC bus ducts fed from generators...

  15. PIA - Industry Interactive Procurement System (IIPS) | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732onMakeEducation Programs Business Enclave PIA -Industry

  16. National Geothermal Data System Deployed to Serve Industry | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005 attheMohammed Khan -Department of Energy 8, 2011,Industry

  17. Contract Management Using Industrial Energy Management & Reporting Systems

    E-Print Network [OSTI]

    Robinson, J. E.

    2011-01-01T23:59:59.000Z

    Energy Management and Reporting Systems (EMRS) are rule-based control systems with a record of reducing energy usage and CO2e emissions while optimizing electrical generation in a real time environment. The rule set successfully optimizes energy...

  18. The systems engineering of a network-centric distributed intelligent system of systems for robust human behavior classifications

    E-Print Network [OSTI]

    Goshorn, Deborah Ellen

    2010-01-01T23:59:59.000Z

    Figure 1.4: Artificial Intelligent Systems SolutionFigure 1.7: Artificial Intelligent Systems Solutiongeneralized artificial intelligent systems solution pyramid

  19. Standardization of information systems development processes and banking industry adaptations

    E-Print Network [OSTI]

    Tanrikulu, Zuhal

    2011-01-01T23:59:59.000Z

    This paper examines the current system development processes of three major Turkish banks in terms of compliance to internationally accepted system development and software engineering standards to determine the common process problems of banks. After an in-depth investigation into system development and software engineering standards, related process-based standards were selected. Questions were then prepared covering the whole system development process by applying the classical Waterfall life cycle model. Each question is made up of guidance and suggestions from the international system development standards. To collect data, people from the information technology departments of three major banks in Turkey were interviewed. Results have been aggregated by examining the current process status of the three banks together. Problematic issues were identified using the international system development standards.

  20. Industrial Fellowship in Logistics Apply the tools of logistics science to analyze, modify or rebuild the logistics system of an industry-leader

    E-Print Network [OSTI]

    Lee, Chi-Guhn

    Industrial Fellowship in Logistics Project Apply the tools of logistics science to analyze, modify or rebuild the logistics system of an industry-leader automotive supplier company. Understand the logistics of logistics network, and investigate and quantify potential savings. Design the concept of a computerized

  1. Introduction to applications and industries for Microelectromechanical Systems (MEMS).

    SciTech Connect (OSTI)

    Walraven, Jeremy Allen

    2003-07-01T23:59:59.000Z

    Microelectromechanical Systems (MEMS) have gained acceptance as viable products for many commercial and government applications. MEMS are currently being used as displays for digital projection systems, sensors for airbag deployment systems, inkjet print head systems, and optical routers. This paper will discuss current and future MEMS applications. What are MEMS? MEMS are typically defined as microscopic devices designed, processed, and used to interact or produce changes within a local environment. A mechanical, electrical, or chemical stimulus can be used to create a mechanical, electrical, or chemical response in a local environment. These smaller, more sophisticated devices that think, act, sense, and communicate are replacing their bulk counterparts in many traditional applications.

  2. Systems Modeling and Analysis Industrial Engineers are interested in optimizing the design and operation of complex systems

    E-Print Network [OSTI]

    Dyer, Bill

    Systems Modeling and Analysis Industrial Engineers are interested in optimizing the design and operation of complex systems composed of people and machines using information, materials and energy to produce goods and services. Analyzing such systems with information-driven models is an essential step

  3. System Dynamics and the Electric Power Industry Andrew Forda

    E-Print Network [OSTI]

    Ford, Andrew

    States. I will pay particular attention to the difficult "energy crisis" years of the 1970s. I a gateway to an impressive body of work for system dynamicists interested in energy. Finally, and most planning at Washington State University. He was formerly a staff member of the Energy Systems and Policy

  4. Design approaches for solar industrial process-heat systems: nontracking and line-focus collector technologies

    SciTech Connect (OSTI)

    Kutscher, C.F.; Davenport, R.L.; Dougherty, D.A.; Gee, R.C.; Masterson, P.M.; May, E.K.

    1982-08-01T23:59:59.000Z

    The design methodology for solar industrial process heat systems is described, and an overview is given of the use of solar energy in industry. A way to determine whether solar energy makes sense for a particular application is described. The basic system configurations used to supply hot water or steam are discussed, and computer-generated graphs are supplied that allow the user to select a collector type. Detailed energy calculations are provided, including the effects of thermal losses and storage. The selection of subsystem components is described, and control systems, installation and start-up details, economics, and safety and environmental issues are explained. (LEW)

  5. Advanced coal-fueled industrial cogeneration gas turbine system

    SciTech Connect (OSTI)

    LeCren, R.T.; Cowell, L.H.; Galica, M.A.; Stephenson, M.D.; Wen, C.S.

    1991-07-01T23:59:59.000Z

    Advances in coal-fueled gas turbine technology over the past few years, together with recent DOE-METC sponsored studies, have served to provide new optimism that the problems demonstrated in the past can be economically resolved and that the coal-fueled gas turbine can ultimately be the preferred system in appropriate market application sectors. The objective of the Solar/METC program is to prove the technical, economic, and environmental feasibility of a coal-fired gas turbine for cogeneration applications through tests of a Centaur Type H engine system operated on coal fuel throughout the engine design operating range. The five-year program consists of three phases, namely: (1) system description; (2) component development; (3) prototype system verification. A successful conclusion to the program will initiate a continuation of the commercialization plan through extended field demonstration runs.

  6. Improved Combustion System for Energy Conservation in Industry

    E-Print Network [OSTI]

    Thekdi, A. C.; Hemsath, K. H.

    1979-01-01T23:59:59.000Z

    into the furnace. This paper describes various types of burners, their applications, and field test results which illustrate that a properly designed and applied combustion system can reduce the energy consumption and improve the productivity by reducing...

  7. Redesigning Process Cooling Systems in the Plastics Industry

    E-Print Network [OSTI]

    Anderson, G. R.

    2006-01-01T23:59:59.000Z

    towers during the winter. Lifetime’s electric provider, Utah Power, manages a demand side management program (DSM) and hired etc Group, Inc to evaluate the cooling systems for potential energy efficiency improvements. etc Group, Inc and Lifetime... basketball systems in 1973 and became Lifetime Products in 1986. Lifetime introduced the first blow-molded plastic table in 1995. In the 120,000 square foot Clearfield, UT facility discussed in this paper, Lifetime blow molds plastic folding tables...

  8. Assessing the Control Systems Capacity for Demand Response in California Industries

    SciTech Connect (OSTI)

    Ghatikar, Girish; McKane, Aimee; Goli, Sasank; Therkelsen, Peter; Olsen, Daniel

    2012-01-18T23:59:59.000Z

    California's electricity markets are moving toward dynamic pricing models, such as real-time pricing, within the next few years, which could have a significant impact on an industrial facility's cost of energy use during the times of peak use. Adequate controls and automated systems that provide industrial facility managers real-time energy use and cost information are necessary for successful implementation of a comprehensive electricity strategy; however, little is known about the current control capacity of California industries. To address this gap, Lawrence Berkeley National Laboratory, in close collaboration with California industrial trade associations, conducted a survey to determine the current state of controls technologies in California industries. This,study identifies sectors that have the technical capability to implement Demand Response (DR) and Automated Demand Response (Auto-DR). In an effort to assist policy makers and industry in meeting the challenges of real-time pricing, facility operational and organizational factors were taken into consideration to generate recommendations on which sectors Demand Response efforts should be focused. Analysis of the survey responses showed that while the vast majority of industrial facilities have semi- or fully automated control systems, participation in Demand Response programs is still low due to perceived barriers. The results also showed that the facilities that use continuous processes are good Demand Response candidates. When comparing facilities participating in Demand Response to those not participating, several similarities and differences emerged. Demand Response-participating facilities and non-participating facilities had similar timings of peak energy use, production processes, and participation in energy audits. Though the survey sample was smaller than anticipated, the results seemed to support our preliminary assumptions. Demonstrations of Auto-Demand Response in industrial facilities with good control capabilities are needed to dispel perceived barriers to participation and to investigate industrial subsectors suggested of having inherent Demand Response potential.

  9. Waste Heat Management Options: Industrial Process Heating Systems

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: SinceDevelopment | Department ofPartnerships Toolkit VoluntaryHURRICANELocalDepartmentSystems

  10. Improving Fan System Performance - A Sourcebook for Industry

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovement of the Lost FoamCooling and Improving Fan System

  11. Managing the Proliferation of Digital Technology in the Automotive Industry A Systems Engineering Approach to Embedded Software

    E-Print Network [OSTI]

    de Weck, Olivier L.

    1 Managing the Proliferation of Digital Technology in the Automotive Industry A Systems Engineering it through to completion. #12;3 Managing the Proliferation of Digital Technology in the Automotive Industry, automotive firms have turned to new technologies to create profit in the industry through performance

  12. Using EPICS enabled industrial hardware for upgrading control systems

    SciTech Connect (OSTI)

    Bjorkland, Eric A [Los Alamos National Laboratory; Veeramani, Arun [NATIONAL INSTRUMENTS; Debelle, Thierry [NATIONAL INSTRUMENTS

    2009-01-01T23:59:59.000Z

    Los Alamos National Laboratory has been working with National Instruments (NI) and Cosy lab to implement EPICS Input Output Controller (IOC) software that runs directly on NI CompactRIO Real Time Controller (RTC) and communicates with NI LabVIEW through a shared memory interface. In this presentation, we will discuss our current progress in upgrading the control system at the Los Alamos Neutron Science Centre (LANSCE) and what we have learned about integrating CompactRIO into large experimental physics facilities. We will also discuss the implications of using Channel Access Server for LabVIEW which will enable more commercial hardware platforms to be used in upgrading existing facilities or in commissioning new ones.

  13. Operating Experience and Economic Assessment of Commercial and Industrial Cool Storage Systems - TVA Case Study

    E-Print Network [OSTI]

    Sieber, R. E.; Dahmus, A. B.

    1985-01-01T23:59:59.000Z

    Thermal storage systems offer utilities a means to change the energy use patterns of both residential and commercial and industrial (C&I) customers by moving water-heating and space-conditioning loads from peak to offpeak periods. Benefits from...

  14. Industrial Research Chair in Energy Systems for Smart Cities SIMON FRASER UNIVERSITY, CANADA

    E-Print Network [OSTI]

    Industrial Research Chair in Energy Systems for Smart Cities SIMON FRASER UNIVERSITY, CANADA energy, as well as any other renewable energy sources and related technology in alignment The Faculty of Applied Sciences at Simon Fraser University, British Columbia, Canada, invites applications

  15. Graduate Studies in Industrial and Systems Engineering Human Factors/Ergonomics

    E-Print Network [OSTI]

    1 Graduate Studies in Industrial and Systems Engineering Human Factors/Ergonomics 2013-2014 Introduction Human Factors Engineering, also known as Ergonomics, can be briefly defined as the science and skills. At OSU, Human Factors/Ergonomics (HF/E) is composed of two broad areas: Cognitive Engineering

  16. International Conference on Industrial Engineering and Systems Management IESM 2005, May 16 19, Marrakech (Morocco)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    the methods used in engineering and construction, from design to building construction (concurrent engineeringInternational Conference on Industrial Engineering and Systems Management IESM 2005, May 16 ­ 19 and a tool. S. Kubicki, J.C. Bignon and G. Halin CRAI - Research Centre in Architecture and Engineering

  17. Modeling Physical Quantities in Industrial Systems using Fluid Stochastic Petri Nets

    E-Print Network [OSTI]

    Gribaudo, Marco

    of a case study, in which the quantity to be regulated is a real fluid quantity: the fuel demand in a gas: Start Fuel Controller 2 Fluid Stochastic Petri Nets Fluid Stochastic Petri Nets are Petri net basedModeling Physical Quantities in Industrial Systems using Fluid Stochastic Petri Nets M. Gribaudo

  18. DOE to Launch Collaborative Effort with Industry to Improve Natural Gas Systems

    Broader source: Energy.gov [DOE]

    DOE will launch a collaborative effort with industry to evaluate and scope high-impact manufacturing R&D to improve natural gas systems efficiency and leak reduction. The goal of this effort is to establish an advanced manufacturing initiative. AMO will lead this effort.

  19. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01T23:59:59.000Z

    and Hybrid Heating Cooling Systems Michael]. Holtz, WayneHYBRID HEATING AND COOLING SYSTEMS Michael J. Holtz Solarspace heating and cooling systems. It is based upon the mode

  20. Model documentation report: Industrial sector demand module of the national energy modeling system

    SciTech Connect (OSTI)

    NONE

    1998-01-01T23:59:59.000Z

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its model. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  1. The Experimental Physics and Industrial Control System architecture: Past, present, and future

    SciTech Connect (OSTI)

    Dalesio, L.R.; Hill, J.O. [Los Alamos National Lab., NM (United States); Kraimer, M. [Argonne National Lab., IL (United States); Lewis, S. [Lawrence Berkeley Lab., CA (United States); Murray, D.; Hunt, S. [Superconducting Super Collider Lab., Dallas, TX (United States); Claussen, M. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Watson, W. [Southeastern Universities Research Association, Inc., Newport News, VA (United States). Continuous Electron Beam Accelerator Facility; Dalesio, J. [Tate Integrated Systems (United States)

    1993-11-01T23:59:59.000Z

    The Experimental Physics and Industrial Control System (EPICS), has been used at a number of sites for performing data acquisition, supervisory control, closed-loop control, sequential control, and operational optimization. The EPICS architecture was originally developed by a group with diverse backgrounds in physics and industrial control. The current architecture represents one instance of the ``standard model.`` It provides distributed processing and communication from any LAN device to the front end controllers. This paper will present the genealogy, current architecture, performance envelope, current installations, and planned extensions for requirements not met by the current architecture.

  2. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01T23:59:59.000Z

    Common Passive and Hybrid Heating Cooling Systems Michael].THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

  3. Deterministic Model for Acute Myelogenous Leukemia Classification

    E-Print Network [OSTI]

    Chronopoulos, Anthony T.

    Deterministic Model for Acute Myelogenous Leukemia Classification Monica Madhukar that the proposed system robustly segments and classifies Acute Myelogenous Leukemia based on complete microscopic/backup service to the physician Keywords- Classification; Segmentation; Acute Myelogenous leukemia; Feature

  4. Industrial Advanced Turbine Systems: Development and Demonstration. Annual report, September 14, 1995--September 30, 1996

    SciTech Connect (OSTI)

    NONE

    1998-12-31T23:59:59.000Z

    The U.S. Department of Energy (DOE) has initiated a program for advanced turbine systems (ATS) that will serve industrial power generation markets. The objective of the cooperative agreements granted under the program is to join the DOE with industry in research and development that will lead to commercial offerings in the private sector. The ATS will provide ultra-high efficiency, environmental superiority, and cost competitiveness. The ATS will foster (1) early market penetration that enhances the global competitiveness of U.S. industry, (2) public health benefits resulting from reduced exhaust gas emissions of target pollutants, (3) reduced cost of power used in the energy-intensive industrial marketplace and (4) the retention and expansion of the skilled U.S. technology base required for the design, development and maintenance of state-of-the-art advanced turbine products. The Industrial ATS Development and Demonstration program is a multi-phased effort. Solar Turbines Incorporated (Solar) has participated in Phases 1 and 2 of the program. On September 14, 1995 Solar was awarded a Cooperative Agreement for Phases 3 and 4 of the program (DE-FC21-95MC31173) by the DOE`s Office of Energy Efficiency and Renewable Energy (EE). Technical administration of the Cooperative Agreement will be provided from EE`s Chicago Operations Office. Contract administration of the Cooperative Agreement will be provided from DOE`s Office of Fossil Energy, Morgantown Energy Technology Center (METC).

  5. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01T23:59:59.000Z

    Passive and Hybrid Heating Cooling Systems Michael]. Holtz,PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS Michael J.of passive and hybrid space heating and cooling systems are

  6. Steam systems in industry: Energy use and energy efficiency improvement potentials

    SciTech Connect (OSTI)

    Einstein, Dan; Worrell, Ernst; Khrushch, Marta

    2001-07-22T23:59:59.000Z

    Steam systems are a part of almost every major industrial process today. Thirty-seven percent of the fossil fuel burned in US industry is burned to produce steam. In this paper we will establish baseline energy consumption for steam systems. Based on a detailed analysis of boiler energy use we estimate current energy use in boilers in U.S. industry at 6.1 Quads (6.4 EJ), emitting almost 66 MtC in CO{sub 2} emissions. We will discuss fuels used and boiler size distribution. We also describe potential savings measures, and estimate the economic energy savings potential in U.S. industry (i.e. having payback period of 3 years or less). We estimate the nationwide economic potential, based on the evaluation of 16 individual measures in steam generation and distribution. The analysis excludes the efficient use of steam and increased heat recovery. Based on the analysis we estimate the economic potential at 18-20% of total boiler energy use, resulting in energy savings approximately 1120-1190 TBtu ( 1180-1260 PJ). This results in a reduction of CO{sub 2} emissions equivalent to 12-13 MtC.

  7. Implementation guidance for industrial-level security systems using radio frequency alarm links

    SciTech Connect (OSTI)

    Swank, R.G.

    1996-07-12T23:59:59.000Z

    Spread spectrum (SS) RF transmission technologies have properties that make the transmitted signal difficult to intercept, interpret, and jam. The digital code used in the modulation process results in a signal that has high reception reliability and supports multiple use of frequency bands and selective addressing. These attributes and the relatively low installation cost of RF systems make SSRF technologies candidate for communications links in security systems used for industrial sites, remote locations, and where trenching or other disturbances of soil or structures may not be desirable or may be costly. This guide provides a description of such a system and presents implementation methods that may be of engineering benefit.

  8. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01T23:59:59.000Z

    system also incorporates mechanical devices to move energy, then the sys tern is classified as hybrid. *

  9. Independent transmission system operators and their role in maintaining reliability in a restructured electric power industry

    SciTech Connect (OSTI)

    NONE

    1998-01-01T23:59:59.000Z

    This report summarizes the current status of proposals to form Independent System Operators (ISOs) to operate high-voltage transmission systems in the United States and reviews their potential role in maintaining bulk power system reliability. As background information, the likely new industry structure, nature of deregulated markets, and institutional framework for bulk power system reliability are reviewed. The report identifies issues related to the formation of ISOs and their roles in markets and in reliability, and describes potential policy directions for encouraging the formation of effective ISOs and ensuring bulk system reliability. Two appendices are provided, which address: (1) system operation arrangements in other countries, and (2) summaries of regional U.S. ISO proposals.

  10. A Collaborative Model for a Sustainable Management System for Energy at Small to Medium Industrial Enterprises

    E-Print Network [OSTI]

    Imel, M.; Gromacki, M.; Magoon, D.

    A Collaborative Model for a Sustainable Management System for Energy at Small to Medium Industrial Enterprises Mark Imel Technical Manager ? Energy Services Burns & McDonnell Kansas City, MO Michael Gromacki Vice President ? Engineering... adequate resources to implement a sustainable energy management program. A strategy to overcome this constraint is to collaborate and develop partnerships between the company and other external resources. This paper describes a unique business...

  11. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01T23:59:59.000Z

    all zones equally. Remote heating systems can be designed toremote from the building envelope proper. South wall heating

  12. Tags vs Shelves: From Social Tagging to Social Classification

    E-Print Network [OSTI]

    Hammerton, James

    mechanism and (iii) existing classification systems such as the Library of Congress Classification System libraries and librarians have performed the task of classification for centuries, the process of man- uallyTags vs Shelves: From Social Tagging to Social Classification Arkaitz Zubiaga NLP & IR Group

  13. Classification of Information Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1985-05-08T23:59:59.000Z

    To specify responsibilities, authorities, policy, and procedures for the management of the Department of Energy (DOE) classification system. Cancels DOE O 5650.2, dated 12-12-1978. Canceled by DOE O 5650.2B, dated 12-31-1991.

  14. Position Management and Classification

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-04-01T23:59:59.000Z

    The order establishes departmental requirements and responsibilities for classifying positions using general schedule (GS) and federal wage system (FWS) standards and for developing and administering a sound position management and classification program within the Department. Cancels Chapter VII of DOE O 320.1.

  15. Fuzzy neural network pattern recognition algorithm for classification of the events in power system networks 

    E-Print Network [OSTI]

    Vasilic, Slavko

    2004-09-30T23:59:59.000Z

    This dissertation introduces advanced artificial intelligence based algorithm for detecting and classifying faults on the power system transmission line. The proposed algorithm is aimed at substituting classical relays ...

  16. data acquisition equipment, and client/server industry-standard com-puter networking technology. The system allows students to get experi-

    E-Print Network [OSTI]

    Gross, George

    data acquisition equipment, and client/server industry-standard com- puter networking technology by the industry. Keywords: Education, laboratories, EMS, client-server systems, real-time systems, and SCADA

  17. Table 35. U.S. Coal Consumption at Manufacturing Plants by North American Industry Classification System (NAICS) Code

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Energy I I' a(STEO) Highlights1,943,742Coalbed20112011 StateChanges

  18. Table 40. U.S. Coal Stocks at Manufacturing Plants by North American Industry Classification System (NAICS) Code

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Energy I I' a(STEO)U.S. Coal Stocks at Manufacturing Plants by North

  19. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  20. Fuzzy neural network pattern recognition algorithm for classification of the events in power system networks

    E-Print Network [OSTI]

    Vasilic, Slavko

    2004-09-30T23:59:59.000Z

    This dissertation introduces advanced artificial intelligence based algorithm for detecting and classifying faults on the power system transmission line. The proposed algorithm is aimed at substituting classical relays susceptible to possible...

  1. The Department of Industrial and Systems Engineering (ISE) at RENSSELAER POLYTECHNIC INSTITUTE in Troy, NY invites applications for a tenure-track faculty position at the Assistant or

    E-Print Network [OSTI]

    Mitchell, John E.

    The Department of Industrial and Systems Engineering (ISE) at RENSSELAER POLYTECHNIC INSTITUTE in Industrial and Systems Engineering or a closely related field. The ISE department is in a period of growth undergraduate and graduate courses in both the Industrial Systems Engineering curriculum, develop and maintain

  2. Proceedings of the 2009 Industrial Engineering Research Conference Developing a Curriculum in Service Systems Engineering

    E-Print Network [OSTI]

    Onder, Nilufer

    Proceedings of the 2009 Industrial Engineering Research Conference Developing a Curriculum slowly to this change. Although some Industrial Engineering (IE) undergraduate programs have added community has responded slowly to this change. Although some Industrial Engineering undergraduate programs

  3. Use of Statistical Approach to Design an Optimal Duct System for On-demand Industrial Exhaust Ventilation 

    E-Print Network [OSTI]

    Litomisky, A.

    2010-01-01T23:59:59.000Z

    This paper elaborates on how to use statistics to calculate optimal parameters (including duct diameters) of energy-efficient industrial ventilation systems. Based on the fan-law, on-demand ventilation can save up to 80% ...

  4. Use of Statistical Approach to Design an Optimal Duct System for On-demand Industrial Exhaust Ventilation

    E-Print Network [OSTI]

    Litomisky, A.

    2010-01-01T23:59:59.000Z

    This paper elaborates on how to use statistics to calculate optimal parameters (including duct diameters) of energy-efficient industrial ventilation systems. Based on the fan-law, on-demand ventilation can save up to 80% of electricity compared...

  5. NEC Hazardous classification and compliance regarding the surface moisture monitor measurement system

    SciTech Connect (OSTI)

    Bussell, J.H., WHC

    1996-06-12T23:59:59.000Z

    The National Electrical Code, NFPA 70, and National Fire Protection Association requirements for use of Surface Moisture Monitor Systems in classified locations are discussed. The design and configuration of the surface moisture monitor are analyzed with respect to how they comply with requirements of the National Electrical Code requirements, articles 500-504.

  6. Industrial advanced turbine systems: Development and demonstration. Quarterly report, July 1--September 30, 1997

    SciTech Connect (OSTI)

    NONE

    1997-12-31T23:59:59.000Z

    The US DOE has initiated a program for advanced turbine systems (ATS) that will serve industrial power generation markets. The ATS will foster (1) early market penetration that enhances the global competitiveness of US industry, (2) public health benefits resulting from reduced exhaust gas emissions of target pollutants, (3) reduced cost of power used in the energy-intensive industrial marketplace and (4) the retention and expansion of the skilled US technology base required for the design, development and maintenance of state-of-the-art advanced turbine products. The Industrial ATS Development and Demonstration program is a multi-phased effort. Solar Turbines Incorporated (Solar) has participated in Phases 1 and 2 of the program. On September 14, 1995 Solar was awarded a Cooperative Agreement for Phases 3 and 4 of the program. Phase 3 of the work is separated into two subphases: Phase 3A entails Component Design and Development; Phase 3B will involve Integrated Subsystem Testing. Phase 4 will cover Host Site Testing. Forecasts call for completion of the program within budget as originally estimated. Scheduled completion is forecasted to be approximately 3 years late to original plan. Significant efforts were spent this quarter to reforecast and control expenditures due to Solar`s and DOE`s current funding and resource constraints. Selective reductions and delays in program activities were identified and implemented. Although these actions will increase technical risk and the attainment of stretch goals, it is not anticipated that the schedule for initial test units or the attainment of basic program performance requirements will be impacted. As of the end of the reporting period work on the program is 22.80% complete based upon milestones completed. This measurement is considered quite conservative as numerous drawings on the Mercury 50 are near release. Variance information is provided in Section 4.0-Program Management.

  7. Comparison of Implementations of a Flexible Joint Multibody Dynamics System Model for an Industrial Robot

    E-Print Network [OSTI]

    Stryk, Oskar von

    In this paper, different implementations of elastic joint models of industrial robots are described and com Industrial robots are widely used in various fields of applica- tion. However, when it comes to tasks where than industrial robots. Industrial robots, on the other hand, have a high work space and are very

  8. Active load management with advanced window wall systems: Research and industry perspectives

    E-Print Network [OSTI]

    2002-01-01T23:59:59.000Z

    building industry in sustainability, energy- efficiency, andneeds such as sustainability, energy-efficiency, optimized

  9. Control Systems Security Center Comparison Study of Industrial Control System Standards against the Control Systems Protection Framework Cyber-Security Requirements

    SciTech Connect (OSTI)

    Robert P. Evans

    2005-09-01T23:59:59.000Z

    Cyber security standards, guidelines, and best practices for control systems are critical requirements that have been delineated and formally recognized by industry and government entities. Cyber security standards provide a common language within the industrial control system community, both national and international, to facilitate understanding of security awareness issues but, ultimately, they are intended to strengthen cyber security for control systems. This study and the preliminary findings outlined in this report are an initial attempt by the Control Systems Security Center (CSSC) Standard Awareness Team to better understand how existing and emerging industry standards, guidelines, and best practices address cyber security for industrial control systems. The Standard Awareness Team comprised subject matter experts in control systems and cyber security technologies and standards from several Department of Energy (DOE) National Laboratories, including Argonne National Laboratory, Idaho National Laboratory, Pacific Northwest National Laboratory, and Sandia National Laboratories. This study was conducted in two parts: a standard identification effort and a comparison analysis effort. During the standard identification effort, the Standard Awareness Team conducted a comprehensive open-source survey of existing control systems security standards, regulations, and guidelines in several of the critical infrastructure (CI) sectors, including the telecommunication, water, chemical, energy (electric power, petroleum and oil, natural gas), and transportation--rail sectors and sub-sectors. During the comparison analysis effort, the team compared the requirements contained in selected, identified, industry standards with the cyber security requirements in ''Cyber Security Protection Framework'', Version 0.9 (hereafter referred to as the ''Framework''). For each of the seven sector/sub-sectors listed above, one standard was selected from the list of standards identified in the identification effort. The requirements in these seven standards were then compared against the requirements given in the Framework. This comparison identified gaps (requirements not covered) in both the individual industry standards and in the Framework. In addition to the sector-specific standards reviewed, the team compared the requirements in the cross-sector Instrumentation, Systems, and Automation Society (ISA) Technical Reports (TR) 99 -1 and -2 to the Framework requirements. The Framework defines a set of security classes separated into families as functional requirements for control system security. Each standard reviewed was compared to this template of requirements to determine if the standard requirements closely or partially matched these Framework requirements. An analysis of each class of requirements pertaining to each standard reviewed can be found in the comparison results section of this report. Refer to Appendix A, ''Synopsis of Comparison Results'', for a complete graphical representation of the study's findings at a glance. Some of the requirements listed in the Framework are covered by many of the standards, while other requirements are addressed by only a few of the standards. In some cases, the scope of the requirements listed in the standard for a particular industry greatly exceeds the requirements given in the Framework. These additional families of requirements, identified by the various standards bodies, could potentially be added to the Framework. These findings are, in part, due to the maturity both of the security standards themselves and of the different industries current focus on security. In addition, there are differences in how communication and control is used in different industries and the consequences of disruptions via security breaches to each particular industry that could affect how security requirements are prioritized. The differences in the requirements listed in the Framework and in the various industry standards are due, in part, to differences in the level and purpose of the standards. While the requir

  10. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  11. Handbook of M.S. Programs -Industrial & Systems Engineering Department, Wayne State University Revised: May 8, 2013 Pg. 1 of 10

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Handbook of M.S. Programs - Industrial & Systems Engineering Department, Wayne State University Revised: May 8, 2013 Pg. 1 of 10 M.S. Programs Handbook Industrial & Systems Engineering Department Wayne Engineering at Wayne State University: Master of Science in Industrial Engineering Master of Science

  12. Active load management with advanced window wall systems: Research and industry perspectives

    SciTech Connect (OSTI)

    Lee, Eleanor S.; Selkowitz, Stephen E.; Levi, Mark S.; Blanc, Steven L.; McConahey, Erin; McClintock, Maurya; Hakkarainen, Pekka; Sbar, Neil L.; Myser, Michael P.

    2002-06-01T23:59:59.000Z

    Advanced window wall systems have the potential to provide demand response by reducing peak electric loads by 20-30% in many commercial buildings through the active control of motorized shading systems, switchable window coatings, operable windows, and ventilated double-skin facade systems. These window strategies involve balancing daylighting and solar heat gains, heat rejection through ventilation, and night-time natural ventilation to achieve space-conditioning and lighting energy use reductions without the negative impacts on occupants associated with other demand responsive (DR) strategies. This paper explores conceptually how advanced window systems fit into the context of active load management programs, which cause customers to directly experience the time-varying costs of their consumption decisions. Technological options are suggested. We present pragmatic criteria that building owners use to determine whether to deploy such strategies. A utility's perspective is given. Industry also provides their perspectives on where the technology is today and what needs to happen to implement such strategies more broadly in the US. While there is significant potential for these advanced window concepts, widespread deployment is unlikely to occur with business-as-usual practice. Technologically, integrated window-lighting-HVAC products are underdeveloped. Implementation is hindered by fragmented labor practices, non-standard communication protocols, and lack of technical expertise. Design tools and information products that quantify energy performance, occupant impacts, reliability, and other pragmatic concerns are not available. Interest within the building industry in sustainability, energy-efficiency, and increased occupant amenity, comfort, and productivity will be the driving factors for these advanced facades in the near term--at least until the dust settles on the deregulated electricity market.

  13. The development of a coal-fired combustion system for industrial process heating applications

    SciTech Connect (OSTI)

    Not Available

    1992-07-16T23:59:59.000Z

    PETC has implemented a number of advanced combustion research projects that will lead to the establishment of a broad, commercially acceptable engineering data base for the advancement of coal as the fuel of choice for boilers, furnaces, and process heaters. Vortec Corporation's Coal-Fired Combustion System for Industrial Process Heating Applications has been selected for Phase III development under contract DE-AC22-91PC91161. This advanced combustion system research program is for the development of innovative coal-fired process heaters which can be used for high temperature melting, smelting, recycling, and refining processes. The process heater concepts to be developed are based on advanced glass melting and ore smelting furnaces developed and patented by Vortec Corporation. The process heater systems to be developed have multiple use applications; however, the Phase HI research effort is being focused on the development of a process heater system to be used for producing glass frits and wool fiber from boiler and incinerator ashes. The primary objective of the Phase III project is to develop and integrate all the system components, from fuel through total system controls, and then test the complete system in order to evaluate its potential marketability. The economic evaluation of commercial scale CMS processes has begun. In order to accurately estimate the cost of the primary process vessels, preliminary designs for 25, 50, and 100 ton/day systems have been started under Task 1. This data will serve as input data for life cycle cost analysis performed as part of techno-economic evaluations. The economic evaluations of commercial CMS systems will be an integral part of the commercialization plan.

  14. JOINT-INDUSTRY PARTNERSHIP TO DEVELOP A HOLLOW SPHERE DUAL-GRADIENT DRILLING SYSTEM

    SciTech Connect (OSTI)

    William C. Maurer; Colin Ruan; Greg Deskins

    2003-05-01T23:59:59.000Z

    Maurer Technology Inc. (MTI) formed a joint-industry partnership to fund the development of a hollow sphere dual-gradient drilling (DGD) system. Phase I consisted of collecting, compiling, analyzing, and distributing information and data regarding a new DGD system for use by the oil and gas industry. Near the end of Phase I, DOE provided funding to the project that was used to conduct a series of critical follow-on tests investigating sphere separation in weighted waterbase and oilbase muds. Drilling costs in deep water are high because seawater pressure on the ocean floor creates a situation where many strings of casing are required due to the relatively close spacing between fracture and pore pressure curves. Approximately $100 million have been spent during the past five years on DGD systems that place pumps on the seafloor to reduce these drilling problems by reducing the annulus fluid pressure at the bottom of the riser. BP estimates that a DGD system can save $9 million per well in the Thunderhorse Field and Conoco estimates it can save $5 to $15 million per well in its deepwater operations. Unfortunately, previous DGD development projects have been unsuccessful due to the high costs ($20 to $50 million) and reliability problems with seafloor pump systems. MTI has been developing a simple DGD system concept that would pump hollow glass spheres into the bottom of the riser to reduce density of the mud in the riser. This eliminates the requirement for seafloor pumps and replaces them with low cost mud pumps, shale shakers, and other oilfield equipment that can be operated on the rig by conventional crews. A $1.8 million Phase I joint-industry project funded by five service companies and three operators showed that hollow spheres could be pumped well, but difficulties were encountered in separating the spheres from a polymer mud supplied by Halliburton due to the high viscosity of this mud at the low shear rates encountered on oilfield shale shaker screens. As a result, an excessive amount of this polymer mud flowed across the screen with the beads instead of through the screen. At the completion of the Phase I project, it was concluded that the hollow sphere system would not work effectively with the polymer mud tested. ExxonMobil and Shell engineers proposed that additional sphere separation tests needed to be conducted with weighted oilfield waterbase and oilbase muds to determine if the DGD system would work with these muds. The DOE agreed to provide a $200,000 grant for these tests. The DOE-funded tests, described in this report, showed that the spheres could be pumped with conventional oilfield centrifugal and triplex mud pumps and separated effectively from both oilfield waterbase and oilbase muds using conventional oilfield shale shakers and hydrocyclones. As a result of the success of these DOE tests, this DGD system is ready for full-scale field testing, first on land wells and later in the offshore environment. Maurer Technology Inc. is currently proposing a Phase II project to oil companies to further develop this DGD concept. This project would be funded by four to eight operators. If Phase II tests are successful, Noble plans to commercialize this system with a service company partner that will market and operate the DGD system on Noble's and other drilling contractors' rigs.

  15. Classification of Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1978-12-12T23:59:59.000Z

    To provide specific responsibilities, standards, and procedures for the management of the Department of Energy (DOE) classification system. Cancels DOE O 5650.1, dated 7-18-78; DOE N 5650.1, dated 8-7-78; DOE N 5650.2, dated 8-7-78; DOE N 5650.3, dated 8-7-78. Canceled by DOE O 5650.2A, dated 5-8-95

  16. A NEW LED-LED PORTABLE CO2 GAS SENSOR BASED ON AN INTERCHANGEABLE MEMBRANE SYSTEM FOR INDUSTRIAL APPLICATIONS

    E-Print Network [OSTI]

    Lee, Hyowon

    to oxygen scavenging [5]. High CO2 levels (10- 80 %) are desirable for foods such as meat and poultryA NEW LED-LED PORTABLE CO2 GAS SENSOR BASED ON AN INTERCHANGEABLE MEMBRANE SYSTEM FOR INDUSTRIAL APPLICATIONS Abstract A new system for CO2 measurement (0-100%) by based on a paired emitter-detector diode

  17. A systems approach to enterprise risk management in high-tech industry

    E-Print Network [OSTI]

    Sharma, Atul, 1973-

    2005-01-01T23:59:59.000Z

    The high-tech industry is showing increased interest in developing an enterprise wide approach to risk management. There are three reasons for this increased interest; first as the industry has matured, as evidenced by ...

  18. Power management as a system-level inhibitor of modularity in the mobile computer industry

    E-Print Network [OSTI]

    Weinstein, Samuel K. (Samuel Keith), 1974-

    2004-01-01T23:59:59.000Z

    Since the mid-90s, the computer industry has been very modular with respect to both product architecture and industry structure. The growing market size of mobile computers means that the challenges facing this segment are ...

  19. o :z:en z SYSTEM FOR INDUSTRIAL APPLICATION

    E-Print Network [OSTI]

    Symposium on Industrial Robots, September 22- 24, 1975 , Chicago , Illinois Artificial Intelligence Center-state sensors, programmable industrial robots, and low-cost minicomputers have provided the opportunity to apply

  20. Virginia Tech Grado Department of Industrial & Systems Engineering Three (3) ISE Faculty Position Announcements

    E-Print Network [OSTI]

    Buehrer, R. Michael

    , industrial engineering, or a closely-related discipline. Emerging Frontiers of Industrial Engineering-data analytics, cybersecurity, bio-manufacturing, and renewable energy. The appointment is at the assistant

  1. Carbonate fuel cell system development for industrial cogeneration. Final report Mar 80-Aug 81

    SciTech Connect (OSTI)

    Schnacke, A.W.; Reinstrom, R.M.; Najewicz, D.J.; Dawes, M.H.

    1981-09-01T23:59:59.000Z

    A survey of various industries was performed to investigate the feasibility of using natural gas-fueled carbonate fuel cell power plants as a cogeneration heat and power source. Two applications were selected: chlorine/caustic soda and aluminum. Three fuel processor technologies, conventional steam reforming, autothermal reforming and an advanced steam reformer concept were used to define three thermodynamic cycle concepts for each of the two applications. Performance and economic studies were conducted for the resulting systems. The advanced steam reformer was found among those studied to be most attractive and was evaluated further and compared to internally reforming the fuel within the fuel cell anodes. From the results of the studies it was concluded that the issues most affecting gas-fired carbonate fuel cell power plant commercial introduction are fuel cell and stack development, fuel reformer technology and the development of reliable, cost-effective heat transfer equipment.

  2. Postprint of article in Journal of Systems and Software 85 (4): 960973 (2012) EClass: an execution classification approach to improving

    E-Print Network [OSTI]

    : an execution classification approach to improving the energy-efficiency of software via machine learning Avenue, Hong Kong A B S T R A C T Energy efficiency at the software level has gained much attention energy them- selves. 1 Introduction Unlocking energy efficiency in performing activities is a universal

  3. Industrial advanced turbine systems: Development and demonstration. Quarterly report, October 1--December 31, 1997

    SciTech Connect (OSTI)

    NONE

    1998-06-01T23:59:59.000Z

    The US DOE has initiated a program for advanced turbine systems (ATS) that will serve industrial power generation markets. The ATS will provide ultra-high efficiency, environmental superiority, and cost competitiveness. The Industrial ATS Development and Demonstration program is a multi-phased effort. Solar Turbines Incorporated (Solar) has participated in Phases 1 and 2 of the program. On September 14, 1995 Solar was awarded a Cooperative Agreement for Phases 3 and 4 of the program. Phase 3 of the work is separated into two subphases: Phase 3A entails Component Design and Development; Phase 3B will involve Integrated Subsystem Testing. Phase 4 will cover Host Site Testing. Forecasts call for completion of the program within budget as originally estimated. Scheduled completion is forecasted to be approximately 3 years late to original plan. This delay has been intentionally planned in order to better match program tasks to the anticipated availability of DOE funds. To ensure the timely realization of DOE/Solar program goals, the development schedule for the smaller system (Mercury 50) and enabling technologies has been maintained, and commissioning of the field test unit is scheduled for May of 2000. As of the end of the reporting period work on the program is 24.7% complete (22.8% last quarter). Work on the Mercury 50 development and ATS technology development portions of the program (WBS 10000 et seq) is 41.6% complete. Although a great amount of work occurred in the quarter, a significant amount of this work entailed the revision and rerelease of several Mercury 50 drawings. Estimates of percent compete are based upon milestones completed. In order to maintain objectivity in assessing schedule progress, Solar uses a 0/100 percent complete assumption for milestones rather than subjectively estimating progress toward completion of milestones. Cost and schedule variation information is provided in Section 4.0 Program Management.

  4. Characterization of the bacterial metagenome in an industrial algae bioenergy production system

    SciTech Connect (OSTI)

    Huang, Shi [Chinese Academy of Sciences; Fulbright, Scott P [Colorado State University; Zeng, Xiaowei [Chinese Academy of Sciences; Yates, Tracy [Solix Biofuels; Wardle, Greg [Solix Biofuels; Chisholm, Stephen T [Colorado State University; Xu, Jian [Chinese Academy of Sciences; Lammers, Peter [New Mexico State University

    2011-03-16T23:59:59.000Z

    Cultivation of oleaginous microalgae for fuel generally requires growth of the intended species to the maximum extent supported by available light. The presence of undesired competitors, pathogens and grazers in cultivation systems will create competition for nitrate, phosphate, sulfate, iron and other micronutrients in the growth medium and potentially decrease microalgal triglyceride production by limiting microalgal health or cell density. Pathogenic bacteria may also directly impact the metabolism or survival of individual microalgal cells. Conversely, symbiotic bacteria that enhance microalgal growth may also be present in the system. Finally, the use of agricultural and municipal wastes as nutrient inputs for microalgal production systems may lead to the introduction and proliferation of human pathogens or interfere with the growth of bacteria with beneficial effects on system performance. These considerations underscore the need to understand bacterial community dynamics in microalgal production systems in order to assess microbiome effects on microalgal productivity and pathogen risks. Here we focus on the bacterial component of microalgal production systems and describe a pipeline for metagenomic characterization of bacterial diversity in industrial cultures of an oleaginous alga, Nannochloropsis salina. Environmental DNA was isolated from 12 marine algal cultures grown at Solix Biofuels, a region of the 16S rRNA gene was amplified by PCR, and 16S amplicons were sequenced using a 454 automated pyrosequencer. The approximately 70,000 sequences that passed quality control clustered into 53,950 unique sequences. The majority of sequences belonged to thirteen phyla. At the genus level, sequences from all samples represented 169 different genera. About 52.94% of all sequences could not be identified at the genus level and were classified at the next highest possible resolution level. Of all sequences, 79.92% corresponded to 169 genera and 70 other taxa. We apply a principal component analysis across the initial sample set to draw correlations between sample variables and changes in microbiome populations.

  5. Cyber-Physical System Security With Deceptive Virtual Hosts for Industrial Control Networks

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Vollmer, Todd; Manic, Milos

    2014-05-01T23:59:59.000Z

    A challenge facing industrial control network administrators is protecting the typically large number of connected assets for which they are responsible. These cyber devices may be tightly coupled with the physical processes they control and human induced failures risk dire real-world consequences. Dynamic virtual honeypots are effective tools for observing and attracting network intruder activity. This paper presents a design and implementation for self-configuring honeypots that passively examine control system network traffic and actively adapt to the observed environment. In contrast to prior work in the field, six tools were analyzed for suitability of network entity information gathering. Ettercap, anmore »established network security tool not commonly used in this capacity, outperformed the other tools and was chosen for implementation. Utilizing Ettercap XML output, a novel four-step algorithm was developed for autonomous creation and update of a Honeyd configuration. This algorithm was tested on an existing small campus grid and sensor network by execution of a collaborative usage scenario. Automatically created virtual hosts were deployed in concert with an anomaly behavior (AB) system in an attack scenario. Virtual hosts were automatically configured with unique emulated network stack behaviors for 92% of the targeted devices. The AB system alerted on 100% of the monitored emulated devices.« less

  6. Cyber-Physical System Security With Deceptive Virtual Hosts for Industrial Control Networks

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Vollmer, Todd; Manic, Milos

    2014-05-01T23:59:59.000Z

    A challenge facing industrial control network administrators is protecting the typically large number of connected assets for which they are responsible. These cyber devices may be tightly coupled with the physical processes they control and human induced failures risk dire real-world consequences. Dynamic virtual honeypots are effective tools for observing and attracting network intruder activity. This paper presents a design and implementation for self-configuring honeypots that passively examine control system network traffic and actively adapt to the observed environment. In contrast to prior work in the field, six tools were analyzed for suitability of network entity information gathering. Ettercap, an established network security tool not commonly used in this capacity, outperformed the other tools and was chosen for implementation. Utilizing Ettercap XML output, a novel four-step algorithm was developed for autonomous creation and update of a Honeyd configuration. This algorithm was tested on an existing small campus grid and sensor network by execution of a collaborative usage scenario. Automatically created virtual hosts were deployed in concert with an anomaly behavior (AB) system in an attack scenario. Virtual hosts were automatically configured with unique emulated network stack behaviors for 92% of the targeted devices. The AB system alerted on 100% of the monitored emulated devices.

  7. HIV classification using coalescent theory

    SciTech Connect (OSTI)

    Zhang, Ming [Los Alamos National Laboratory; Letiner, Thomas K [Los Alamos National Laboratory; Korber, Bette T [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    Algorithms for subtype classification and breakpoint detection of HIV-I sequences are based on a classification system of HIV-l. Hence, their quality highly depend on this system. Due to the history of creation of the current HIV-I nomenclature, the current one contains inconsistencies like: The phylogenetic distance between the subtype B and D is remarkably small compared with other pairs of subtypes. In fact, it is more like the distance of a pair of subsubtypes Robertson et al. (2000); Subtypes E and I do not exist any more since they were discovered to be composed of recombinants Robertson et al. (2000); It is currently discussed whether -- instead of CRF02 being a recombinant of subtype A and G -- subtype G should be designated as a circulating recombination form (CRF) nd CRF02 as a subtype Abecasis et al. (2007); There are 8 complete and over 400 partial HIV genomes in the LANL-database which belong neither to a subtype nor to a CRF (denoted by U). Moreover, the current classification system is somehow arbitrary like all complex classification systems that were created manually. To this end, it is desirable to deduce the classification system of HIV systematically by an algorithm. Of course, this problem is not restricted to HIV, but applies to all fast mutating and recombining viruses. Our work addresses the simpler subproblem to score classifications of given input sequences of some virus species (classification denotes a partition of the input sequences in several subtypes and CRFs). To this end, we reconstruct ancestral recombination graphs (ARG) of the input sequences under restrictions determined by the given classification. These restritions are imposed in order to ensure that the reconstructed ARGs do not contradict the classification under consideration. Then, we find the ARG with maximal probability by means of Markov Chain Monte Carlo methods. The probability of the most probable ARG is interpreted as a score for the classification. To our knowledge, this particular problem was not addressed up to now. The software package Lamarc Kuhner et al. (2000) allows for sampling ARGs, but it assumes that recombination events only involve one breakpoint. However, in HIV recombinants usually have more than one breakpoint. Moreover, Lamarc does not perform an explicit breakpoint detection, but tries to find them by chance. Although this approach is suitable for most situations, it will not lead to satisfying results in case of highly recombining viruses with multiple breakpoints.

  8. Performance test of a hoop energy storage system for the industrial application

    SciTech Connect (OSTI)

    Lee, K.C.; Han, S.H.; Kim, K.S.; Chung, K.H. [Seoul National Univ. (Korea, Republic of). Dept. of Nuclear Engineering; Moon, T.S.; Cho, C.H.; Hanjung, R. [Changwon, Kyung-Nam (Korea, Republic of)

    1999-11-01T23:59:59.000Z

    The power demand of an industrialized country has a peak at daytime. For example in Korea the minimum power demand at midnight of a typical one day pattern is two thirds of maximum at daytime and average power over one year of 1997 is 71.5% of maximum power of that year. For this need of the large energy storage facilities, the authors developed a hoop energy storage system. Hoop energy storage system was suggested to compensate for the stiffness of the nuclear power plants, but the authors expect that it can be applied to the other green energy sources such as solar energy. In comparison with chemical energy storage system and pumped hydro dams, hoop energy storage system has the properties of high energy conversion efficiency and high stored energy density, it also has low environmental impact because it can be installed underground. The hoop energy storage system has the same aspects with the flywheel energy storage that it stores electric energy at a high-speed rotating rotor as the rotational kinetic energy and restores the energy as electricity when it is needed, but it has three major different aspects as followings: (1) The shape of rotor is not a disk but a hoop without axis, which increases the stored energy density; (2) For the frictionless high-speed rotation, the magnetic levitation using Nd-Fe-B permanent magnets was applied; (3) It is suggested to be a large scaled facility for the ultimate purpose of the diurnal load leveling of electric power utility.

  9. INDUSTRIAL CONTROL SYSTEM CYBER SECURITY: QUESTIONS AND ANSWERS RELEVANT TO NUCLEAR FACILITIES, SAFEGUARDS AND SECURITY

    SciTech Connect (OSTI)

    Robert S. Anderson; Mark Schanfein; Trond Bjornard; Paul Moskowitz

    2011-07-01T23:59:59.000Z

    Typical questions surrounding industrial control system (ICS) cyber security always lead back to: What could a cyber attack do to my system(s) and; how much should I worry about it? These two leading questions represent only a fraction of questions asked when discussing cyber security as it applies to any program, company, business, or organization. The intent of this paper is to open a dialog of important pertinent questions and answers that managers of nuclear facilities engaged in nuclear facility security and safeguards should examine, i.e., what questions should be asked; and how do the answers affect an organization's ability to effectively safeguard and secure nuclear material. When a cyber intrusion is reported, what does that mean? Can an intrusion be detected or go un-noticed? Are nuclear security or safeguards systems potentially vulnerable? What about the digital systems employed in process monitoring, and international safeguards? Organizations expend considerable efforts to ensure that their facilities can maintain continuity of operations against physical threats. However, cyber threats particularly on ICSs may not be well known or understood, and often do not receive adequate attention. With the disclosure of the Stuxnet virus that has recently attacked nuclear infrastructure, many organizations have recognized the need for an urgent interest in cyber attacks and defenses against them. Several questions arise including discussions about the insider threat, adequate cyber protections, program readiness, encryption, and many more. These questions, among others, are discussed so as to raise the awareness and shed light on ways to protect nuclear facilities and materials against such attacks.

  10. Tama Home Co., Ltd. Hitachi Systems, Ltd. Hankyu Travel International Co., Ltd. Yamazaki Baking Co., Ltd. Daikin Industries, Ltd. Nippon Telegraph And Telephone West Corp. Noevir Co., Ltd. Itochu Corp. Nara Women's University Toray Industries, Inc. Murata

    E-Print Network [OSTI]

    Banbara, Mutsunori

    Tama Home Co., Ltd. Hitachi Systems, Ltd. Hankyu Travel International Co., Ltd. Yamazaki Baking Co., Ltd. Daikin Industries, Ltd. Nippon Telegraph And Telephone West Corp. Noevir Co., Ltd. Itochu Corp. Nara Women's University Toray Industries, Inc. Murata Manufacturing Co., Ltd. Toyo Corp

  11. New Decision Support Tool for Acute Lymphoblastic Leukemia Classification

    E-Print Network [OSTI]

    Chronopoulos, Anthony T.

    New Decision Support Tool for Acute Lymphoblastic Leukemia Classification Monica Madhukar affected by Acute Lymphoblastic Leukemia. The results show that the proposed system robustly segments and classifies acute lymphoblastic leukemia based on complete microscopic blood images. Keywords: Classification

  12. Automatic Fish Classification for Underwater Species Behavior Understanding

    E-Print Network [OSTI]

    Fisher, Bob

    Automatic Fish Classification for Underwater Species Behavior Understanding Concetto Spampinato an automatic fish classi- fication system that operates in the natural underwater en- vironment to assist marine biologists in understanding fish behavior. Fish classification is performed by combining two types

  13. ITL BULLETIN FOR AUGUST 2011 PROTECTING INDUSTRIAL CONTROL SYSTEMS KEY COMPONENTS OF

    E-Print Network [OSTI]

    , transportation, healthcare, and emergency services sectors. Federal agencies also operate critical production, handling, and distribution. ICS are used in many industries: electric, water, oil and gas

  14. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    : Occupational biomechanics, work physiology, industrial ergonomics, environmental hygiene, cognitive engineeringINDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor

  15. Selection of melter systems for the DOE/Industrial Center for Waste Vitrification Research

    SciTech Connect (OSTI)

    Bickford, D.F.

    1993-12-31T23:59:59.000Z

    The EPA has designated vitrification as the best developed available technology for immobilization of High-Level Nuclear Waste. In a recent federal facilities compliance agreement between the EPA, the State of Washington, and the DOE, the DOE agreed to vitrify all of the Low Level Radioactive Waste resulting from processing of High Level Radioactive Waste stored at the Hanford Site. This is expected to result in the requirement of 100 ton per day Low Level Radioactive Waste melters. Thus, there is increased need for the rapid adaptation of commercial melter equipment to DOE`s needs. DOE has needed a facility where commercial pilot scale equipment could be operated on surrogate (non-radioactive) simulations of typical DOE waste streams. The DOE/Industry Center for Vitrification Research (Center) was established in 1992 at the Clemson University Department of Environmental Systems Engineering, Clemson, SC, to address that need. This report discusses some of the characteristics of the melter types selected for installation of the Center. An overall objective of the Center has been to provide the broadest possible treatment capability with the minimum number of melter units. Thus, units have been sought which have broad potential application, and which had construction characteristics which would allow their adaptation to various waste compositions, and various operating conditions, including extreme variations in throughput, and widely differing radiological control requirements. The report discusses waste types suitable for vitrification; technical requirements for the application of vitrification to low level mixed wastes; available melters and systems; and selection of melter systems. An annotated bibliography is included.

  16. Exterior Insulation Finish System (EIFS) Walls ORNL provides the tools to enable industry to engineer durable, moisture-tolerant

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Exterior Insulation Finish System (EIFS) Walls ORNL provides the tools to enable industry the insulating value of walls and the energy efficiency of buildings. The EIFS concept came to America from in both moisture control and insulating value. EIFS's are inherently superior on thermal performance

  17. International Journal of Computer Information Systems and Industrial Management Applications. ISSN 2150-7988 Volume 3 (2011), pp. 812819

    E-Print Network [OSTI]

    Werman, Michael

    International Journal of Computer Information Systems and Industrial Management Applications. ISSN functions reduce the differences between high color levels in comparison to middle color levels that re light intensities, and assigned the hue and sat- uration values of saturated (r,g,b) triplets according

  18. Reliability Engineering and System Safety 92 (2007) 609618 The nuclear industry's transition to risk-informed regulation and

    E-Print Network [OSTI]

    2007-01-01T23:59:59.000Z

    improvement in safety based on Institute of Nuclear Power Operations (INPO) performance indicatorsReliability Engineering and System Safety 92 (2007) 609­618 The nuclear industry's transition a Nuclear Science and Engineering Department, Massachusetts Institute of Technology, Cambridge, MA 02139

  19. Why Process-Orientation is Scarce: An Empirical Study of Process-oriented Information Systems in the Automotive Industry

    E-Print Network [OSTI]

    Ulm, Universität

    in the Automotive Industry Bela Mutschler, Johannes Bumiller DaimlerChrysler Research & Technology P.O. Box 2360 the reasons for this drawback, we con- ducted a case study in the automotive domain and a survey among 79 in this context concerns the alignment of information systems (IS) and business processes [6]. In the automotive

  20. Sept, 1998./D. Barker, TJNAF.& S. Lewis, LBNL1 of 19EPICS Tutorial: Overview Experimental Physics and Industrial Control System

    E-Print Network [OSTI]

    Sept, 1998./D. Barker, TJNAF.& S. Lewis, LBNL1 of 19EPICS Tutorial: Overview Experimental Physics and Industrial Control System (EPICS) EPICS Tutorial #12;Sept, 1998./D. Barker, TJNAF.& S. Lewis, LBNL2 of 19 Introduction to EPICS #12;Sept, 1998./D. Barker, TJNAF.& S. Lewis, LBNL3 of 19EPICS Tutorial: Overview ·Tool

  1. Efficient electric motor systems for industry. Report on roundtable discussions of market problems and ways to overcome them

    SciTech Connect (OSTI)

    Not Available

    1993-11-01T23:59:59.000Z

    Improving the efficiency of electric motor systems is one of the best energy-saving opportunities for the United States. The Department of Energy (DOE) Office of Industrial Technologies estimates that by the year 2010 in the industrial sector, the opportunities for savings from improved efficiency in electric motor systems could be roughly as follows: 240 billion kilowatthours per year. $13 billion per year from US industry`s energy bill. Up to 50,000 megawatts in new powerplant capacity avoided. Up to 44 million metric tons of carbon-equivalent emissions mitigated per year, corresponding to 3 percent of present US emissions. Recognizing the benefits of this significant opportunity for energy savings, DOE has targeted improvements in the efficiency of electric motor systems as a key initiative in the effort to promote flexibility and efficiency in the way electricity is produced and used. Efficient electric motor systems will help the United States reach its national goals for energy savings and greenhouse gas emission reductions.

  2. Classification of Two-Phase Flow Patterns by Ultrasonic Sensing

    E-Print Network [OSTI]

    Ray, Asok

    (e.g., petrochemical processes and nuclear power plants). This concept of flow pattern classification are critical for design, analysis, and operation in a variety of industries such as petrochemical processes

  3. Hurricane Damage Sustained by the Oyster Industry and the Oyster Reefs Across the Galveston Bay System

    E-Print Network [OSTI]

    Hurricane Damage Sustained by the Oyster Industry and the Oyster Reefs Across the Galveston Bay., Russell J. Miget, and Lawrence L. Falconer. "Hurricane Damage Sustained by the Oyster Industry-1412. Tel: 361/265-9203, Fax: 361/265-9434, E-mail: l-falconer@tamu.edu. Hurricane Damage Sustained

  4. Dynamics of the UK Natural Gas Industry: System Dynamics Modelling and Long-Term Energy Policy Analysis

    E-Print Network [OSTI]

    Chi, K C; Reiner, David; Nuttall, William J

    www.eprg.group.cam.ac.uk E P R G W O R K IN G P A P E R N O N -T E C H N IC A L S U M M A R Y DYNAMICS OF THE UK NATURAL GAS INDUSTRY: SYSTEM DYNAMICS MODELLING AND LONG-TERM ENERGY POLICY ANALYSIS EPRG Working Paper 0913... Cambridge Working Paper in Economics 0922 Kong Chyong Chi , David M. Reiner and William J. Nuttall The UK offshore natural gas and oil industry has a long and successful history and has been said to represent the pride of UK...

  5. Approaching Real-time Network Traffic Classification

    E-Print Network [OSTI]

    Haddadi, Hamed

    and studies. It serves as the input for Intrusion Detection Systems, provides Class-of-Service (CoS) mapping22 Approaching Real-time Network Traffic Classification ISSN 1470-5559 RR-06-12 October 2006-time Network Traffic Classification Wei Li, Kaysar Abdin, Robert Dann and Andrew Moore Department of Computer

  6. FACULTY POSITION ANNOUNCEMENT Manufacturing and/or Logistics The Industrial & Systems Engineering Department in the College of Engineering at the University of

    E-Print Network [OSTI]

    Kaminsky, Werner

    FACULTY POSITION ANNOUNCEMENT ­ Manufacturing and/or Logistics The Industrial & Systems Engineering must have a Ph.D. in Industrial Engineering, Systems Engineering and/or Operations Research Department in the College of Engineering at the University of Washington is preparing to accept applications

  7. Manufacturing Industrial Development for the Alternative Energy Systems-Final Report

    SciTech Connect (OSTI)

    Dr. Chuck Ryan, National Center for Manufacturing Sciences; Dr. Dawn White, Accio Energy; Mr. Duncan Pratt, General Electric Global Research

    2013-01-30T23:59:59.000Z

    NCMS identified and developed critical manufacturing technology assessments vital to the affordable manufacturing of alternative-energy systems. NCMS leveraged technologies from other industrial sectors and worked with our extensive member organizations to provide DOE with two projects with far-reaching impact on the generation of wind energy. In the response for a call for project ideas, 26 project teams submitted ideas. Following a detailed selection criteria, two projects were chosen for development: Advanced Manufacturing for Modular Electro-kinetic (E-K) Wind Energy Conversion Technology - The goal of this project was to demonstrate that a modular wind energy technology based on electrohydrodynamic wind energy principles and employing automotive heritage high volume manufacturing techniques and modular platform design concepts can result in significant cost reductions for wind energy systems at a range of sizes from 100KW to multi-MW. During this program, the Accio/Boeing team made major progress on validating the EHD wind energy technology as commercially viable in the wind energy sector, and moved along the manufacturing readiness axis with a series of design changes that increased net system output. Hybrid Laser Arc Welding for Manufacture of Wind Towers - The goal of this research program was to reduce the cost of manufacturing wind towers through the introduction of hybrid laser arc welding (HLAW) into the supply chain for manufacturing wind towers. HLAW has the potential to enhance productivity while reducing energy consumption to offset the foreign low-cost labor advantage and thereby enhance U.S. competitiveness. HLAW technology combines laser welding and arc welding to produce an energy efficient, high productivity, welding process for heavy manufacturing. This process leverages the ability of a laser to produce deep weld penetration and the ability of gas metal arc welding (GMAW) to deposit filler material, thereby producing stable, high quality, welds on joints with gaps and mismatches typical of those seen in heavy manufacturing. Wind towers utilize varying thicknesses of steel throughout their structures to meet the mechanical load requirements while keeping material costs low. A typical tower might have as many as twelve different material thicknesses. Joining each thickness requires a unique joint design and welding approach to enable the management of quality, productivity, and mechanical properties. In this program, laser joining of materials with thicknesses ranging from 12mm to 35mm were evaluated against the standard quality and mechanical requirements for General Electric wind tower components. The joining processes demonstrated showed the ability to meet key requirements with the appropriate process controls in place.

  8. Techno-Economic Design Tools Used in Selecting Industrial Energy Recovery Systems

    E-Print Network [OSTI]

    Hanus, N.

    1982-01-01T23:59:59.000Z

    This paper presents computer-based procedures used to perform techno-economic evaluations of industrial heat sources as candidates for energy recovery. The procedures are based on four versatile and easy-to-use computer models, two for technical...

  9. Evaluation and Design of Utility Co-Owned Cogeneration Systems for Industrial Parks

    E-Print Network [OSTI]

    Hu, D. S.; Tamaro, R. F.; Schiller, S. R.

    1984-01-01T23:59:59.000Z

    The Electric Power Research Institute, EPRI, is currently evaluating the potential of utility co-owned cogeneration facilities in industrial parks. This paper describes part of the work performed by one of EPRI's contractors, Impell Corporation...

  10. Developing system-based leading indicators for proactive risk management in the chemical processing industry

    E-Print Network [OSTI]

    Khawaji, Ibrahim A. (Ibrahim Abdullah)

    2012-01-01T23:59:59.000Z

    The chemical processing industry has faced challenges with achieving improvements in safety performance, and accidents continue to occur. When accidents occur, they usually have a confluence of multiple factors, suggesting ...

  11. The United States Industrial Electric Motor Systems Market Opportunities Assessment: Key Results

    E-Print Network [OSTI]

    Rosenberg, M.

    industry groups (SICs) are derived from the Manufacturing Energy Consumption Survey: 1994 (MECS) and various surveys conducted by the Bureau of the Census. Information on the breakdown of that energy by application and motor size, as well..., and total onsite electricity generation, minus sales and transfers off site. See MECS 1994. Other sources; Department of Agriculture, 1992, Census of Mineral Industries, 1992, ADL 1980, EPRI 1988, EPRI 1992. 206 ESL-IE-99-05-30 Proceedings from...

  12. THE GALACTIC O-STAR SPECTROSCOPIC SURVEY. I. CLASSIFICATION SYSTEM AND BRIGHT NORTHERN STARS IN THE BLUE-VIOLET AT R {approx} 2500

    SciTech Connect (OSTI)

    Sota, A.; Maiz Apellaniz, J.; Alfaro, E. J. [Instituto de Astrofisica de Andalucia-CSIC, Glorieta de la Astronomia s/n, 18008 Granada (Spain); Walborn, N. R. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Barba, R. H. [Instituto de Ciencias Astronomicas, de la Tierra y del Espacio, Casilla 467, 5400 San Juan (Argentina); Morrell, N. I. [Las Campanas Observatory, Observatories of the Carnegie Institution of Washington, La Serena (Chile); Gamen, R. C. [Instituto de Astrofisica de La Plata (CCT La Plata-CONICET, Universidad Nacional de La Plata), Paseo del Bosque s/n, 1900 La Plata (Argentina); Arias, J. I., E-mail: jmaiz@iaa.es [Departamento de Fisica, Universidad de La Serena, Av. Cisternas 1200 Norte, La Serena (Chile)

    2011-04-01T23:59:59.000Z

    We present the first installment of a massive spectroscopic survey of Galactic O stars, based on new, high signal-to-noise ratio, R {approx} 2500 digital observations from both hemispheres selected from the Galactic O-Star Catalog of MaIz Apellaniz et al. and Sota et al. The spectral classification system is rediscussed and a new atlas is presented, which supersedes previous versions. Extensive sequences of exceptional objects are given, including types Ofc, ON/OC, Onfp, Of?p, Oe, and double-lined spectroscopic binaries. The remaining normal spectra bring this first sample to 184 stars, which is close to complete to B = 8 and north of {delta} = -20{sup 0} and includes all of the northern objects in MaIz Apellaniz et al. that are still classified as O stars. The systematic and random accuracies of these classifications are substantially higher than previously attainable, because of the quality, quantity, and homogeneity of the data and analysis procedures. These results will enhance subsequent investigations in Galactic astronomy and stellar astrophysics. In the future, we will publish the rest of the survey, beginning with a second paper that will include most of the southern stars in MaIz Apellaniz et al.

  13. Final Report - Chemical Industry Corrosion Management - A Comprehensive Information System (ASSET 2)

    SciTech Connect (OSTI)

    Randy C. John, Arthur L. Young, Arthur D. Pelton, William T. Thompson adn Ian G. Wright

    2008-10-10T23:59:59.000Z

    The research sponsored by this project has greatly expanded the ASSET corrosion prediction software system to produce a world-class technology to assess and predict engineering corrosion of metals and alloys corroding by exposure to hot gases. The effort included corrosion data compilation from numerous industrial sources and data generation at Shell Oak Ridge National Laboratory and several other companies for selected conditions. These data were organized into groupings representing various combinations of commercially available alloys and corrosion by various mechanisms after acceptance via a critical screening process to ensure the data were for alloys and conditions, which were adequately well defined, and of sufficient repeatability. ASSET is the largest and most capable, publicly-available technology in the field of corrosion assessment and prediction for alloys corroding by high temperature processes in chemical plants, hydrogen production, energy conversion processes, petroleum refining, power generation, fuels production and pulp/paper processes. The problems addressed by ASSET are: determination of the likely dominant corrosion mechanism based upon information available to the chemical engineers designing and/or operating various processes and prediction of engineering metal losses and lifetimes of commercial alloys used to build structural components. These assessments consider exposure conditions (metal temperatures, gas compositions and pressures), alloy compositions and exposure times. Results of the assessments are determination of the likely dominant corrosion mechanism and prediction of the loss of metal/alloy thickness as a function of time, temperature, gas composition and gas pressure. The uses of these corrosion mechanism assessments and metal loss predictions are that the degradation of processing equipment can be managed for the first time in a way which supports efforts to reduce energy consumption, ensure structural integrity of equipment with the goals to avoid premature failure, to quantitatively manage corrosion over the entire life of high temperature process equipment, to select alloys for equipment and to assist in equipment maintenance programs. ASSET software operates on typical Windows-based (Trademark of Microsoft Corporation) personal computers using operating systems such as Windows 2000, Windows NT and Vista. The software is user friendly and contains the background information needed to make productive use of the software in various help-screens in the ASSET software. A graduate from a university-level curriculum producing a B.S. in mechanical/chemical/materials science/engineering, chemistry or physics typically possesses the background required to make appropriate use of ASSET technology. A training/orientation workshop, which requires about 3 hours of class time was developed and has been provided multiple times to various user groups of ASSET technology. Approximately 100 persons have been trained in use of the technology. ASSET technology is available to about 65 companies representing industries in petroleum/gas production and processing, metals/alloys production, power generation, and equipment design.

  14. The Industrialization of Thermoelectric Power Generation Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Industrialization of Thermoelectric Power Generation Technology The Industrialization of Thermoelectric Power Generation Technology Presents module and system requirements for...

  15. Industry and forest wetlands: Cooperative research initiatives

    SciTech Connect (OSTI)

    Shepard, J.P. (National Council of the Paper Industry for Air and Stream Improvement, Gainesville, FL (United States)); Lucier, A.A. (National Council of the Paper Industry for Air and Stream Improvement, New York, NY (United States)); Haines, L.W. (International Paper, Bainbridge, GA (United States))

    1993-05-01T23:59:59.000Z

    In 1989 the forest products industry responded to a challenge of the National Wetlands Policy Forum to initiate a cooperative research program on forest wetlands management organized through the National Council of the Paper Industry for Air and Stream Improvement (NCASI). The objective is to determine how forest landowners can manage wetlands for timber production while protecting other wetland functions such as flood storage, water purification, and food chain/wildlife habitat support. Studies supported by the NCASI in 9 states are summarized. Technical support on wetland regulatory issues to member companies is part of the research program. Since guidelines for recognizing wetlands for regulatory proposed have changed frequently, the NCASI has recommend an explicit link between wetland delineation and a classification system that considers difference among wetland types in vegetation, soils, hydrology, appearance, landscape position, and other factors. 16 refs.

  16. Classification Documents and Publications

    Broader source: Energy.gov [DOE]

    Certain documents and publications created or issued by the Office of Classification are available from this page.

  17. Classification System for Identifying Women at Risk for Altered Partial Breast Irradiation Recommendations After Breast Magnetic Resonance Imaging

    SciTech Connect (OSTI)

    Kowalchik, Kristin V. [Department of Radiation Oncology, Mayo Clinic, Jacksonville, Florida (United States); Vallow, Laura A., E-mail: vallow.laura@mayo.edu [Department of Radiation Oncology, Mayo Clinic, Jacksonville, Florida (United States); McDonough, Michelle [Department of Radiology, Mayo Clinic, Jacksonville, Florida (United States); Thomas, Colleen S.; Heckman, Michael G. [Section of Biostatistics, Mayo Clinic, Jacksonville, Florida (United States); Peterson, Jennifer L. [Department of Radiation Oncology, Mayo Clinic, Jacksonville, Florida (United States); Adkisson, Cameron D. [Department of General Surgery, Mayo Clinic, Jacksonville, Florida (United States); Serago, Christopher [Department of Radiation Oncology, Mayo Clinic, Jacksonville, Florida (United States); McLaughlin, Sarah A. [Department of General Surgery, Mayo Clinic, Jacksonville, Florida (United States)

    2013-09-01T23:59:59.000Z

    Purpose: To study the utility of preoperative breast MRI for partial breast irradiation (PBI) patient selection, using multivariable analysis of significant risk factors to create a classification rule. Methods and Materials: Between 2002 and 2009, 712 women with newly diagnosed breast cancer underwent preoperative bilateral breast MRI at Mayo Clinic Florida. Of this cohort, 566 were retrospectively deemed eligible for PBI according to the National Surgical Adjuvant Breast and Bowel Project Protocol B-39 inclusion criteria using physical examination, mammogram, and/or ultrasound. Magnetic resonance images were then reviewed to determine their impact on patient eligibility. The patient and tumor characteristics were evaluated to determine risk factors for altered PBI eligibility after MRI and to create a classification rule. Results: Of the 566 patients initially eligible for PBI, 141 (25%) were found ineligible because of pathologically proven MRI findings. Magnetic resonance imaging detected additional ipsilateral breast cancer in 118 (21%). Of these, 62 (11%) had more extensive disease than originally noted before MRI, and 64 (11%) had multicentric disease. Contralateral breast cancer was detected in 28 (5%). Four characteristics were found to be significantly associated with PBI ineligibility after MRI on multivariable analysis: premenopausal status (P=.021), detection by palpation (P<.001), first-degree relative with a history of breast cancer (P=.033), and lobular histology (P=.002). Risk factors were assigned a score of 0-2. The risk of altered PBI eligibility from MRI based on number of risk factors was 0:18%; 1:22%; 2:42%; 3:65%. Conclusions: Preoperative bilateral breast MRI altered the PBI recommendations for 25% of women. Women who may undergo PBI should be considered for breast MRI, especially those with lobular histology or with 2 or more of the following risk factors: premenopausal, detection by palpation, and first-degree relative with a history of breast cancer.

  18. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Obeying Environmental Laws Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the...

  19. Industrial cogeneration optimization program. Volume II. Appendix A. Conceptual designs and preliminary equipment specifications. Appendix B. Characterization of cogeneration systems (near-term technology). Appendix C. Optimized cogeneration systems

    SciTech Connect (OSTI)

    Not Available

    1980-01-01T23:59:59.000Z

    This appendix to a report which evaluates the technical, economic, and institutional aspects of industrial cogeneration for conserving energy in the food, chemical, textile, paper, and petroleum industries contains data, descriptions, and diagrams on conceptual designs and preliminary equipment specifications for cogeneration facilities; characterization of cogeneration systems in terms of fuel utilization, performance, air pollution control, thermal energy storage systems, and capital equipment costs; and optimized cogeneration systems for specific industrial plants. (LCL)

  20. NEMS industrial module documentation report

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  1. Simultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial and Manufacturing Systems Engineering

    E-Print Network [OSTI]

    Salustri, Filippo A.

    to component dimension i CT total cost of manufacturing and quality Cpi capability index of last process, and quality, for the sake of achieving a minimal total cost and reducing lead-time. However, in existing workSimultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial

  2. Journal of Industrial and Systems Engineering Vol. 1, No. 3, pp 190-199

    E-Print Network [OSTI]

    Murty, Katta G.

    .) waiting under it on the ground. The YT then takes that container to the SY (storage yard) for temporary and Optimum Layouts for Storage Yards of Container Terminals Katta G. Murty Department of Industrial terminals, EXSY (export storage yards), YC (yard cranes), Crane clashing, Crane overloading, Cross

  3. Assessment of an Industrial Wet Oxidation System for Burning Waste and Low-Grade Fuels

    E-Print Network [OSTI]

    Bettinger, J.; Koppel, P.; Margulies, A.

    an assessment of wet oxidation technologies, followed by bench-scale and pilot unit testing and by eventual demonstration of the pilot unit at an industrial host site. This paper discusses the assessment conducted under the first phase of this effort, which...

  4. Development and Testing of Industrial Scale Coal Fired Combustion System, Phase 3

    SciTech Connect (OSTI)

    Bert Zauderer

    1998-09-30T23:59:59.000Z

    Coal Tech Corp's mission is to develop, license & sell innovative, lowest cost, solid fuel fired power systems & total emission control processes using proprietary and patented technology for domestic and international markets. The present project 'DEVELOPMENT & TESTING OF INDUSTRIAL SCALE, COAL FIRED COMBUSTION SYSTEM, PHASE 3' on DOE Contract DE-AC22-91PC91162 was a key element in achieving this objective. The project consisted of five tasks that were divided into three phases. The first phase, 'Optimization of First Generation 20 MMBtu/hr Air-Cooled Slagging Coal Tech Combustor', consisted of three tasks, which are detailed in Appendix 'A' of this report. They were implemented in 1992 and 1993 at the first generation, 20 MMBtu/hour, combustor-boiler test site in Williamsport, PA. It consisted of substantial combustor modifications and coal-fired tests designed to improve the combustor's wall cooling, slag and ash management, automating of its operation, and correcting severe deficiencies in the coal feeding to the combustor. The need for these changes was indicated during the prior 900-hour test effort on this combustor that was conducted as part of the DOE Clean Coal Program. A combination of combustor changes, auxiliary equipment changes, sophisticated multi-dimensional combustion analysis, computer controlled automation, and series of single and double day shift tests totaling about 300 hours, either resolved these operational issues or indicated that further corrective changes were needed in the combustor design. The key result from both analyses and tests was that the combustor must be substantially lengthened to maximize combustion efficiency and sharply increase slag retention in the combustor. A measure of the success of these modifications was realized in the third phase of this project, consisting of task 5 entitled: 'Site Demonstration with the Second Generation 20 MMBtu/hr Air-Cooled Slagging Coal Tech Combustor'. The details of the task 5 effort are contained in Appendix 'C'. It was implemented between 1994 and 1998 after the entire 20 MMBtu/hr combustor-boiler facility was relocated to Philadelphia, PA in 1994. A new test facility was designed and installed. A substantially longer combustor was fabricated. Although not in the project plan or cost plan, an entire steam turbine-electric power generating plant was designed and the appropriate new and used equipment for continuous operation was specified. Insufficient funds and the lack of a customer for any electric power that the test facility could have generated prevented the installation of the power generating equipment needed for continuous operation. All other task 5 project measures were met and exceeded. 107 days of testing in task 5, which exceeded the 63 days (about 500 hours) in the test plan, were implemented. Compared to the first generation 20 MMBtu/hr combustor in Williamsport, the 2nd generation combustor has a much higher combustion efficiency, the retention of slag inside the combustor doubled to about 75% of the coal ash, and the ash carryover into the boiler, a major problem in the Williamsport combustor was essentially eliminated. In addition, the project goals for coal-fired emissions were exceeded in task 5. SO{sub 2} was reduced by 80% to 0.2 lb/MMBtu in a combination of reagent injection in the combustion and post-combustion zones. NO{sub x} was reduced by 93% to 0.07 lb/MMBtu in a combination of staged combustion in the combustor and post-combustion reagent injection. A baghouse was installed that was rated to 0.03 lb/MMBtu stack particle emissions. The initial particle emission test by EPA Method 5 indicated substantially higher emissions far beyond that indicated by the clear emission plume. These emissions were attributed to steel particles released by wall corrosion in the baghouse, correction of which had no effect of emissions.

  5. National Geothermal Resource Assessment and Classification |...

    Office of Environmental Management (EM)

    Resource Assessment and Classification National Geothermal Resource Assessment and Classification National Geothermal Resource Assessment and Classification presentation at the...

  6. Improving Cooling System Immunity Supply Voltage Sags in Petroleum and Chemical Industries

    E-Print Network [OSTI]

    Dorr, D. S.

    , it is often an overlooked component in the power quality investigation. The cooling process generally consists of a series of pumps, fans and cooling towers with various controls for temperature and flow rate. The EPRI PEAC Corporation Knoxville, TN... the Twenty-second National Industrial Energy Technology Conference, Houston, TX, April 5-6, 2000 EPRI PEAC BRIEF 46 EXCERPT 3 WlRE CONTROL WITH FUSED CONTROL CIRCUIT TRANSFORMER Background AND CONTROL RELAY Relays, contactors, and motor starters are used...

  7. Research in Industrial Combustion Systems - Current and Future R&D

    E-Print Network [OSTI]

    Rebello, W. J.; Keller, J. G.

    combustor with its high pressure gain is attractive for use in the process to make Portland cement where energy is needed to heat the raw materials (coal or petroleum coke) and additional power is required for particle separation (electricity.... INTRODUCTION The total energy consumption in the U.S. in 1977 was about 76 Quads (quadrillion BTU). Of this amount, about 28 Quads were consumed by the industrial sector in the form of coal, petroleum, natural gas and electri city. The manufacturing...

  8. The Department of Industrial and Systems Engineering is accepting applications for open rank non-tenure track faculty positions for academic year 2014-2015. All positions require teaching undergraduate and/or

    E-Print Network [OSTI]

    The Department of Industrial and Systems Engineering is accepting applications for open rank non/or graduate courses related to Industrial and Systems Engineering, and service to the department. A successful of Industrial and Systems Engineering provides competitive compensation packages and benefits. To apply, please

  9. Economic Evaluation of By-Product Power/Co-Generation Systems for Industrial Plants with Fluidized-Bed Coal Burning Facilities

    E-Print Network [OSTI]

    Mesko, J. E.

    1980-01-01T23:59:59.000Z

    Economic analysis of the construction and operation of by-product electric power and steam/power cogeneration systems in coal fired fluidized-bed steam cycles, located at individual industrial sites analyzed by the author, is being presented...

  10. Bioinformatics | Computer Engineering | Cyber Security | Electrical Engineering | Industrial Engineering | Manufacturing Engineering Organizational Behavior | Power Electronics and Systems | Telecommunication Networks | Wireless Innovation

    E-Print Network [OSTI]

    Aronov, Boris

    or in Westchester and Long Island. The degree earned and the body of knowledge is exactly the same as those receivedBioinformatics | Computer Engineering | Cyber Security | Electrical Engineering | Industrial Engineering | Manufacturing Engineering Organizational Behavior | Power Electronics and Systems

  11. Classification of power quality disturbances using time-frequency ambiguity plane and

    E-Print Network [OSTI]

    Mamishev, Alexander

    Classification of power quality disturbances using time-frequency ambiguity plane and neural disturbances in power systems is an important task in power system monitoring and protection, This paper discussed. Keywords -- Power Quality Disturbances, Classification, Ambiguity Plane, Modified Fisher

  12. SSAB/MEFOS oxy-coal system -- 3 years of industrial experience

    SciTech Connect (OSTI)

    Wikstroem, J.O.; Skoeld, B.E. [MEFOS, Luleaa (Sweden); Kaersrud, K.

    1996-12-31T23:59:59.000Z

    SSAB, Swedish Steel AB, is the main steel producer in Sweden. MEFOS is a foundation for metallurgical research. The principals include 35 Nordic companies. SSAB and MEFOS have, in cooperation, developed a swirl type, coaxial, oxy-coal lance, that drastically improves the combustion of pulverized coal in the Blast Furnace tuyere and race way. The development was made through an extensive test work in a highly instrumented single tuyere on an industrial Blast Furnace. The technology has been in commercial use since early 1993, with excellent result.

  13. Analyzing Your Compressed Air System; Industrial Technologies Program (ITP) Compressed Air Tip Sheet #4 (Fact Sheet)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1Albuquerque, NMPerformanceof Energy4 * August 2004 Industrial

  14. The livestock mandatory price reporting system: Lamb industry perceptions and impact

    E-Print Network [OSTI]

    Poghosyan, Artak Vahagn

    2002-01-01T23:59:59.000Z

    The livestock mandatory price reporting system was approved by Congress in July of 1999, signed into law on October 22, 1999, and launched on April 2, 2001. In announcing the implementation of the mandatory price reporting system, the USDA claimed...

  15. Industrial Application of High Combustion Intensity Systems and Energy Conservation Implications

    E-Print Network [OSTI]

    Williams, F. D. M.; Anderson, L. E.

    1982-01-01T23:59:59.000Z

    process are quantified for vortex stabilized systems. Design analyses of the fuel injectors used with gaseous, liquid and pulverized coal fuels are also presented. The resulting high intensity combustion systems evolved are illustrated with photographs...

  16. Department of Industrial and Manufacturing Engineering Fall 2011 The Center for Integrated Healthcare Delivery Systems (CIHDS) Academy

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Industrial and Manufacturing Engineering Fall 2011 The Center is to educate young adults about the field of Industrial Engineering through learning modules and examples that focus on the healthcare industry. The learning modules shall utilize Industrial Engineering concepts

  17. Industrial Engineering Industrial Advisory Board

    E-Print Network [OSTI]

    Gelfond, Michael

    Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

  18. Genetic classification of petroleum basins

    SciTech Connect (OSTI)

    Demaison, G.; Huizinga, B.J.

    1989-03-01T23:59:59.000Z

    Rather than relying on a descriptive geologic approach, this genetic classification is based on the universal laws that control processes of petroleum formation, migration, and entrapment. Petroleum basins or systems are defined as dynamic petroleum-generating and concentrating physico-chemical systems functioning on a geologic space and time scale. A petroleum system results from the combination of a generative subsystem (or hydrocarbon kitchen), essentially controlled by chemical processes, and a migration-entrapment subsystem, controlled by physical processes. The generative subsystem provides a certain supply of petroleum to the basin during a given geologic time span. The migration-entrapment subsystem receives petroleum and distributes it in a manner that can lead either to dispersion and loss or to concentration of the regional charge into economic accumulations. The authors classification scheme for petroleum basins rests on a simple working nomenclature consisting of the following qualifiers: (1) charge factor: undercharged, normally charged, or supercharged, (2) migration drainage factor: vertically drained or laterally drained, and (3) entrapment factor: low impedance or high impedance. Examples chosen from an extensive roster of documented petroleum basins are reviewed to explain the proposed classification.

  19. Integrating Kinect Depth Data with a Stochastic Object Classification Framework for Forestry Robots

    E-Print Network [OSTI]

    Hellström, Thomas

    Integrating Kinect Depth Data with a Stochastic Object Classification Framework for Forestry Robots camera for a stochastic classification system for forestry robots. The images are classified as bush- ject classification system that uses only RGB camera. The system is aimed for a forestry robot

  20. U.S. Geological Survey Library Classification By R. Scott Sasscer

    E-Print Network [OSTI]

    Torgersen, Christian

    U.S. Geological Survey Library Classification System By R. Scott Sasscer U.S. Geological Survey classification system is a tool for classifying and retrieving geoscience library materials. The index promotes.S. Geological Survey Library classification system / by R. Scott Sasscer. p. cm. ­ (U.S. Geological Survey

  1. UK and Italian EIA systems: A comparative study on management practice and performance in the construction industry

    SciTech Connect (OSTI)

    Bassi, Andrea, E-mail: ab395@bath.co.uk [University of Bath, Faculty of Engineering and Design, Claverton Down, Bath BA2 7AY (United Kingdom); Howard, Robert, E-mail: robhoward@constcom.demon.co.uk [Construction Communications, 8 Cotton& #x27; s Field, Dry Drayton, Cambridge CB23 8DG (United Kingdom); Geneletti, Davide, E-mail: davide.geneletti@ing.unitn.it [Sustainability Science Program, Harvard University, 79 JFK Street, Cambridge, MA 02138 (United States); Dept. of Civil and Environmental Engineering, University of Trento, Via Mesiano, 77 38123 Trento (Italy); Ferrari, Simone, E-mail: simone.ferrari@polimi.it [Dept. BEST, Building Environment Science and Technology, Politecnico di Milano, Via Bonardi, 3 20133 Milano (Italy)

    2012-04-15T23:59:59.000Z

    This study evaluates and contrasts the management practice and the performance that characterise Environmental Impact Assessments (EIA) in Italy and in the UK. The methodology relies on the investigation of six carefully selected case studies, critically reviewed by referring to EIA and project design information, as well as collecting the opinion of key project participants. The study focuses on the construction industry and on specific key sectors like infrastructure for transport and renewable energy and commercial and tourism development. A main term of reference for the analyses has been established by critically reviewing international literature so as to outline common good practice, requirements for the enhancement of sustainability principles and typically incurred drawbacks. The proposed approach enhances transfer of knowledge and of experiences between the analyzed contexts and allows the provision of guidelines for practitioners. Distinctive differences between the UK and the Italian EIA systems have been detected for pivotal phases and elements of EIA, like screening, scoping, analysis of alternatives and of potential impacts, definition of mitigation strategies, review, decision making, public participation and follow up. - Highlights: Black-Right-Pointing-Pointer The Italian and the UK Environmental Impact Assessment systems are compared. Black-Right-Pointing-Pointer The research is centred on the construction industry. Black-Right-Pointing-Pointer Issues and shortcomings are analysed by investigating six case studies. Black-Right-Pointing-Pointer Integration of EIA with sustainability principles is appraised. Black-Right-Pointing-Pointer General guidelines are provided to assist practitioners in the two national contexts.

  2. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Industrial steam users recognize the need to reduce system cost in order to remain internationally competitive. Steam systems are a key utility that influence cost significantly, and represent a high value opportunity ...

  3. Lean Transformation in the U.S. Aerospace Industry: Appreciating Interdependent Social and Technical Systems

    E-Print Network [OSTI]

    CUTCHER-GERSHENFELD, JOEL

    2003-05-02T23:59:59.000Z

    Lean practices and principles build on a half-century of successive initiatives aimed at transforming social and technical systems in organizations. While they are send as ...

  4. Systems Theoretic Hazard Analysis (STPA) applied to the risk review of complex systems : an example from the medical device industry

    E-Print Network [OSTI]

    Antoine, Blandine

    2013-01-01T23:59:59.000Z

    Traditional methods to identify and document hazards, and the corresponding safety constraints, are lacking in their ability to account for human, software and sub-system interactions in highly technical systems. STAMP, a ...

  5. Advanced coal-fueled industrial cogeneration gas turbine system. Annual report, June 1990--June 1991

    SciTech Connect (OSTI)

    LeCren, R.T.; Cowell, L.H.; Galica, M.A.; Stephenson, M.D.; Wen, C.S.

    1991-07-01T23:59:59.000Z

    Advances in coal-fueled gas turbine technology over the past few years, together with recent DOE-METC sponsored studies, have served to provide new optimism that the problems demonstrated in the past can be economically resolved and that the coal-fueled gas turbine can ultimately be the preferred system in appropriate market application sectors. The objective of the Solar/METC program is to prove the technical, economic, and environmental feasibility of a coal-fired gas turbine for cogeneration applications through tests of a Centaur Type H engine system operated on coal fuel throughout the engine design operating range. The five-year program consists of three phases, namely: (1) system description; (2) component development; (3) prototype system verification. A successful conclusion to the program will initiate a continuation of the commercialization plan through extended field demonstration runs.

  6. 3M's System-Wide Approach to Industrial Energy Efficiency: A Corporate and Facility Perspective

    E-Print Network [OSTI]

    Schultz, S. C.; Belk, V.; Asrael, J.

    optimized through re-sealing the roof, ducts, windows and wall openings to minimize infiltration of outside air. To continue these upgrades, a preventative maintenance system has been established for evaluation and replacement of exterior door weather...

  7. A Hybrid Model Based and Statistical Fault Diagnosis System for Industrial Process

    E-Print Network [OSTI]

    Lin, Chen-Han

    2014-11-21T23:59:59.000Z

    This thesis presents a hybrid model based and statistical fault diagnosis system, which applied on the nonlinear three-tank model. The purpose of fault diagnosis is generating and analyzing the residual to find out the fault occurrence. This fault...

  8. Forecasting and Capturing Emission Reductions Using Industrial Energy Management and Reporting Systems 

    E-Print Network [OSTI]

    Robinson, J.

    2010-01-01T23:59:59.000Z

    The Mandatory 2010 Green House Gas (GHG) Reporting Regulations and pending climate change legislation has increased interest in Energy Management and Reporting Systems (EMRS) as a means of both reducing and reporting GHG ...

  9. Forecasting and Capturing Emission Reductions Using Industrial Energy Management and Reporting Systems

    E-Print Network [OSTI]

    Robinson, J.

    2010-01-01T23:59:59.000Z

    The Mandatory 2010 Green House Gas (GHG) Reporting Regulations and pending climate change legislation has increased interest in Energy Management and Reporting Systems (EMRS) as a means of both reducing and reporting GHG emissions. This paper...

  10. Rule-Based Energy Management System Applied to Large Industrial Facilities

    E-Print Network [OSTI]

    Gauthier, M.; Childress, R. L.

    Deregulation of electricity and rising fuel costs are causing renewed interest in Energy Management Systems (EMS). This paper details the results of integrating a rule-based EMS controller at a Pulp and Paper Mill and additional findings from...

  11. THE INVESTIGATION OF CORROSION PROBLEMS, PRECAUTIONS AND THE NEW SYSTEMS REGARDING TO THE HUMAN HEALTH IN AUTOMOBILE INDUSTRY

    E-Print Network [OSTI]

    M. Evren Sar?yerli; Mercedes-benz Turk; Gökçe S. Sar?yerli

    In every part of our life and in every division of the industry, the corrosion is one of vital problems. It becomes a subject for research and progress in the automotive sector. Based on the knowledge that the lifetime is the most important insurance that is given to the customers by the firms in a though competition, the prevention of corrosion occurs depending on the environmental protection factors and the utilization of new technology. Necessary importance should be given to the human health and the production of vehicle according to the climate changes. On this study, primarily the types of corrosion in the automotive industry has been investigated and then the data of corrosion process and the protection concepts of corrosion have been given. Mostly the dynamic corrosion program and tests that have been applied to the test vehicle took place. And then the process of surface cathodic deep dying and the development of establishment have been mentioned. Lastly, the systems for the prevention of the corrosion with the environmental protection factor determined. The usage of test vehicle met with all the corrosion problems that normally do not happen, the region of corrosion can be easily determined and all the preventive precautions can be taken before corrosion occurs. Nowadays the advanced isolation techniques such as the phosphatising, the surface process, the cathodic deep dying, the coating of surface and the other protection concepts that realize the techniques to continue by the constructive application, the successful results on the surfaces of the vehicles have been taken.

  12. Process control monitoring systems, industrial plants, and process control monitoring methods

    DOE Patents [OSTI]

    Skorpik, James R [Kennewick, WA; Gosselin, Stephen R [Richland, WA; Harris, Joe C [Kennewick, WA

    2010-09-07T23:59:59.000Z

    A system comprises a valve; a plurality of RFID sensor assemblies coupled to the valve to monitor a plurality of parameters associated with the valve; a control tag configured to wirelessly communicate with the respective tags that are coupled to the valve, the control tag being further configured to communicate with an RF reader; and an RF reader configured to selectively communicate with the control tag, the reader including an RF receiver. Other systems and methods are also provided.

  13. High-efficiency Forage Systems for Texas Beef Production The cattle industry in Texas is facing a crisis due to doubling of fertilizer, grain, and

    E-Print Network [OSTI]

    High-efficiency Forage Systems for Texas Beef Production The cattle industry in Texas is facing for adaptation, water· use efficiency, pest resistance, and forage nutritive value. New, efficient beef) and high plant nutrient efficiency grasses. Develop improved management systems to incorporate the new

  14. IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS -FORMAL METHODS FOR EMBEDDED SYSTEMS DESIGN, NOVEMBER 2008 1 Formal Methods for Systems Engineering Behavior

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2008 1 Formal Methods for Systems Engineering Behavior Models Charlotte Seidner and Olivier H. Roux on formal methods such as model checking since such techniques, however powerful and mature, are deemed too and integrating a formal verification tool within a development platform for system design for defense

  15. Compliance problems of small utility systems with the Powerplant and Industrial Fuel Use Act of 1978: volume II - appendices

    SciTech Connect (OSTI)

    None

    1981-01-01T23:59:59.000Z

    A study of the problems of compliance with the Powerplant and Industrial Fuel Use Act of 1978 experienced by electric utility systems which have a total generating capacity of less than 2000 MW is presented. This volume presents the following appendices: (A) case studies (Farmington, New Mexico; Lamar, Colorado; Dover, Delaware; Wolverine Electric Cooperative, Michigan; Central Telephone and Utilities, Kansas; Sierra Pacific Power Company, Nevada; Vero Beach, Florida; Lubbock, Texas; Western Farmers Cooperative, Oklahoma; and West Texas Utilities Company, Texas); (B) contacts and responses to study; (C) joint action legislation chart; (D) Texas Municipal Power Agency case study; (E) existing generating units jointly owned with small utilities; (F) future generating units jointly owned with small utilities; (G) Federal Register Notice of April 17, 1980, and letter of inquiry to utilities; (H) small utility responses; and (I) Section 744, PIFUA. (WHK)

  16. INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, VOL. 5, NO. 4, DECEMBER 2012 INDUSTRIAL ROBOT CALIBRATION USING A VIRTUAL

    E-Print Network [OSTI]

    Hayes, John

    INDUSTRIAL ROBOT CALIBRATION USING A VIRTUAL LINEAR CONSTRAINT Biqiang Du 1* , Ning Xi 2 , Erick Nieves 2 1 Abstract- This paper proposes a systematic method to identify the joint zero offset of industrial robot Nieves, Industrial Robot Calibration Using a Virtual Linear Constraint 988 is improved due to the high

  17. An Expert System Using Nonmonotonic Techniques for Benefits Inquiry in the Insurance Industry

    E-Print Network [OSTI]

    Morgenstern, Leora

    ­ ventive care, immunizations, and maternity. The text associated with preventive care lists the different the existing technology for ben­ efits inquiry. We next list the desiderata for our expert system. Subsequently be generalized. 2 Existing Technology Benefits inquiry has traditionally been performed by cus­ tomer service

  18. Hollow-waveguide delivery systems for high-power, industrial CO2 lasers

    E-Print Network [OSTI]

    . In addition, these expensive systems are cumbersome in terms of their ability to gain access to remote at the ends of a hollow fiber. Hollow metallic2,3 and dielectric waveguides4 with air cooling have been used, however, are considerably higher, and therefore hollow fibers need to be upgraded with special cooling

  19. Resources Improving Pumping System Performance: A Sourcebook for Industry, DOE and Hydraulic

    E-Print Network [OSTI]

    unknown authors

    Consider impeller trimming when any of the following apply: • The head provided by an oversized, throttled pump exceeds process requirements. • System bypass valves are open, indicating excess flow rate. • The pump is operating far from its design point. • The operating head and (or) flow rate are greater than process requirements.

  20. DUTY STATEMENT CLASSIFICATION

    E-Print Network [OSTI]

    studies, environmental impact reports, and Commission reports. (E) #12;CLASSIFICATION: Planner I - EFS of Environmental Impact Reports submitted to the Commission and prepares assessments of those sections. (M) 5 TITLE: Biologist DIVISION: Siting, Transmission & Environmental Protection DATE PREPARED: October 3

  1. Classification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsNovember 13, 2014 Building AmericaEnergyandClassification Classification

  2. The development of a portable data acquisition system for use in commercial and industrial energy audits

    E-Print Network [OSTI]

    Davis, Michael Andrew

    1993-01-01T23:59:59.000Z

    Systems Data Acquisition Board (PSDAB), Steve Williams wrote and tested the "C" source code used for the Power Harmonics (PHA) algorithms. TABLE OF CONTENTS CHAPTER Page, I INTRODUCTION - THE NATURE OF THE PROBLEM . . A. Introduction B. The Data... C. EXAMPLES OF ACQUIRED FIELD TEST DATA 44 APPENDIX D. SOURCE CODE LISTINGS 47 VITA . . 73 vut LIST OF TABLES TABLE Page I Actual and PHA Computed Harmonic Powers . 32, LIST OF FIGURES FIGURE Page, 2 3 4 5 6 8 9 10 11 Typical...

  3. Saving Energy in Industrial Compressed Air Systems: Issues and Obstacles in DSM Program Design

    E-Print Network [OSTI]

    Trojanowski, D.; Parfomak, P.

    contained compressed air systems.(I) Air compressors are generally driven by electric motors, often in large sizes and often operating continuously throughout the day. As a result, compressors can account for a substantial fraction of the electricity... consumption and peak demand in a given facility. A study by North Carolina A&T University found that air compressors accounted for as much as 49 % of base energy consumption, and up to 58% of peak electrical demand, in the facilities they audited.(2...

  4. Advanced combustion system for industrial boilers. Phase 2, Quarterly technical progress report, October--December 1990

    SciTech Connect (OSTI)

    Wagoner, C.L.; Foote, J.P.; Millard, W.P.; Attig, R.C.; Schulz, R.J.

    1990-12-31T23:59:59.000Z

    This During this quarter, work continued on development/improvement of the low-NO{sub x} coal combustor for the boiler system. Reburning tests were conducted in the external, water-cooled test duct with a length of 15 feet using ultra fine coal with propane to reduce the NO{sub x} levels to as low as 0.295 lb-NO{sub x}/MBtu. Work also continued on design/construction of the new coal-feed system that will be used for the 100-hour demonstration test with the on-line refillable coal hopper operating in air at atmospheric pressure. Coal will be loaded into the hopper from bulk bags. Initial testing of the UTSI boiler control and automation system was successful. Normally-pulverized coal with approximately 70% passing a number 200 sieve was burned in the external test duct. Initial flame-visualization tests were successful, and the burner was able to handle coal without being micronized to the ultra fine level. Refractory was poured for a new combustor second-stage assembly. Subsequently, the combustor was installed inside the 200 hp fire-tube boiler.

  5. Dynamic Bayesian networks for the classification of spinning discs

    E-Print Network [OSTI]

    Schmidt, Aurora Clare, 1981-

    2004-01-01T23:59:59.000Z

    This thesis considers issues for the application of particle filters to a class of nonlinear filtering and classification problems. Specifically, we study a prototype system of spinning discs. The system combines linear ...

  6. Structural Composites Industries 4 kilowatt wind system development. Phase I: design and analysis, technical report

    SciTech Connect (OSTI)

    Malkine, N.; Bottrell, G.; Weingart, O.

    1981-05-01T23:59:59.000Z

    A 4 kW small wind energy conversion system (SWECS) has been designed for residential applications in which relatively low (10 mph) mean annual wind speeds prevail. The objectives were to develop such a machine to produce electrical energy at 6 cents per kWh while operating in parallel with a utility grid or auxiliary generator. The Phase I effort began in November, 1979 and was carried through the Final Design Review in February 1981. During this period extensive trade, optimization and analytical studies were performed in an effort to provide the optimum machine to best meet the objectives. Certain components, systems and manufacturing processes were tested and evaluated and detail design drawings were produced. The resulting design is a 31-foot diameter horizontal axis downwind machine rated 5.7 kW and incorporating the following unique features: Composite Blades; Free-Standing Composite Tower; Torque-Actuated Blade Pitch Control. The design meets or exceeds all contract requirements except that for cost of energy. The target 6 cents per kWh will be achieved in a mean wind speed slightly below 12 mph instead of the specified 10 mph.

  7. Program Transformation Mechanics A Classification of Mechanisms for Program Transformation

    E-Print Network [OSTI]

    Utrecht, Universiteit

    Program Transformation Mechanics A Classification of Mechanisms for Program Transformation with a Survey of Existing Transformation Systems Jonne van Wijngaarden Eelco Visser UU-CS-2003-048 Institute Transformation Mechanics A Classification of Mechanisms for Program Transformation with a Survey of Existing

  8. Commercial Vehicle Classification using Vehicle Signature Data

    E-Print Network [OSTI]

    Liu, Hang; Jeng, Shin-Ting; Andre Tok, Yeow Chern; Ritchie, Stephen G.

    2008-01-01T23:59:59.000Z

    Traffic Measurement and Vehicle Classification with SingleG. Ritchie. Real-time Vehicle Classification using InductiveReijmers, J.J. , "On-line vehicle classification," Vehicular

  9. Energy conservation guide for industrial processes

    SciTech Connect (OSTI)

    Not Available

    1981-01-01T23:59:59.000Z

    Th Energy Conservation Guide for industrial processes has simple instructions to survey energy use areas at Navy industrial activities like shipyards, Naval air rework facilities and government owned, contractor operated (GOCO) plants. This guide includes information and procedures on: organizing and conducting an industrial energy survey; evaluating purchased energy data; descriptions of industrial systems; and evaluation of industrial processes for conservation.

  10. Save Energy Now (SEN) Assessment Helps Expand Energy Management Program at Shaw Industries: Flooring Company Saves $872,000 Annually by Improving Steam System Efficiency

    SciTech Connect (OSTI)

    Not Available

    2008-07-01T23:59:59.000Z

    This case study describes how the Shaw Industries plant #20 in Dalton, Georgia, achieved annual savings of $872,000 and 93,000 MMBtu after receiving a DOE Save Energy Now energy assessment and implementing recommendations to improve the efficiency of its steam system.

  11. Systems Engineering and Innovation in Control--anSystems Engineering and Innovation in Control an Industry Perspective and an Application to Automotive

    E-Print Network [OSTI]

    Shapiro, Benjamin

    an Industry Perspective and an Application to Automotive Powertrains Tariq Samadq Corporate Fellow, Honeywell in the industrial context · Trends in automotive powertrain control · Advanced control for powertrainsOutline · Honeywell and controls · Advanced control applications in the industrial context · Trends in automotive

  12. Using QA classification to guide design and manage risk

    SciTech Connect (OSTI)

    Lathrop, J. [Strategic Insights, Los Altos, CA (United States); DeKlever, R. [Raytheon Services Nevada, Las Vegas, NV (United States); Petrie, E.H. [USDOE Nevada Field Office, Las Vegas, NV (United States)

    1993-01-28T23:59:59.000Z

    Raytheon Services Nevada has developed a classification process based on probabilistic risk assessment, using accident/impact scenarios for each system classified. Initial classification analyses were performed for the 20 systems of Package IA of the Exploratory Studies Facility (ESF). The analyses demonstrated a solid, defensible methodological basis for classification which minimizes the use of direct engineering judgment. They provide guidance for ESF design and risk management through the identification of: The critical characteristics of each system that need to be controlled; and the parts of the information base that most need to be further developed through performance assessment or other efforts.

  13. Using QA classification to guide design and manage risk

    SciTech Connect (OSTI)

    Lathrop, J. [Strategic Insights, Los Altos, CA (United States); DeKlever, R. [Raytheon Services Nevada, Las Vegas, NV (United States); Petrie, E.H. [DOE, Las Vegas, NV (United States)

    1993-12-31T23:59:59.000Z

    Raytheon Services Nevada has developed a classification process based on probabilistic risk assessment, using accident/impact scenarios for each system classified. Initial classification analyses were performed for the 20 systems of Package 1A of the Exploratory Studies Facility (ESF). The analyses demonstrated a solid, defensible methodological basis for classification which minimizes the use of direct engineering judgment. They provide guidance for ESF design and risk management through the identification of: the critical characteristics of each system that need to be controlled; and the parts of the information base that most need to be further developed through performance assessment or other efforts.

  14. Technical Report #98T-010, Department of Industrial & Mfg. Systems Egnieering, Lehigh Univerisity COORDINATION PRODUCTION AND TRANSPORTATION

    E-Print Network [OSTI]

    Wu, David

    and production planning and analyze the costs introduced by coordination. Using a Lagrangean decomposition scheme process. Integration of a manufacturing supply chain involves myriad planning, control and coordination logistics have been dealt with separately both in industry and academia. In industry, a production plan

  15. 1202 IEEE TRANSACTIONS ON SIGNAL PROCESSING, VOL. 46, NO. 5, MAY 1998 Classification of Underwater Mammals

    E-Print Network [OSTI]

    Intrator, Nathan

    1202 IEEE TRANSACTIONS ON SIGNAL PROCESSING, VOL. 46, NO. 5, MAY 1998 Classification of Underwater Cooper, Nathan Intrator, and Harel Shouval Abstract--Underwater mammal sound classification is demon and different wavelet representations are stud- ied. The system achieves outstanding classification performance

  16. Automatic Model Classification of Measured Internet Traffic Yi Zeng and Thomas M. Chen

    E-Print Network [OSTI]

    Chen, Thomas M.

    issues for future work. II. MODEL-LIBRARY TRAFFIC CLASSIFICATION Many traffic models have been developed Model 2 module ... Model library Fig. 1. General model classification system In the general case with NAutomatic Model Classification of Measured Internet Traffic Yi Zeng and Thomas M. Chen Department

  17. SOUND CLASSIFICATION IN A SMART ROOM ENVIRONMENT: AN APPROACH USING GMM AND HMM METHODS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    be hospitalized at home and smart information systems would be needed in order to assist human operatorsSOUND CLASSIFICATION IN A SMART ROOM ENVIRONMENT: AN APPROACH USING GMM AND HMM METHODS Michel suited for sound classification. Until now, GMMs are frequently used for sound classification in smart

  18. Infinite dimensional discrimination and classification

    E-Print Network [OSTI]

    Shin, Hyejin

    2007-09-17T23:59:59.000Z

    classification methodologies for such data have been suggested and supporting theory is quite limited. The focus of this dissertation is on discrimination and classification in this infinite dimensional setting. The methodology and theory we develop are based...

  19. OTHER INDUSTRIES

    Broader source: Energy.gov [DOE]

    AMO funded research results in novel technologies in diverse industries beyond the most energy intensive ones within the U.S. Manufacturing sector. These technologies offer quantifiable energy...

  20. Hazard Classification for Fuel Supply Shutdown Facility

    SciTech Connect (OSTI)

    BENECKE, M.W.

    2000-09-07T23:59:59.000Z

    Final hazard classification for the 300 Area N Reactor fuel storage facility resulted in the assignment of Nuclear Facility Hazard Category 3 for the uranium metal fuel and feed material storage buildings (303-A, 303-B, 303-G, 3712, and 3716). Radiological for the residual uranium and thorium oxide storage building and an empty former fuel storage building that may be used for limited radioactive material storage in the future (303-K/3707-G, and 303-E), and Industrial for the remainder of the Fuel Supply Shutdown buildings (303-F/311 Tank Farm, 303-M, 313-S, 333, 334 and Tank Farm, 334-A, and MO-052).

  1. A comparison of automated land cover/use classification methods for a Texas bottomland hardwood system using lidar, spot-5, and ancillary data

    E-Print Network [OSTI]

    Vernon, Zachary Isaac

    2009-05-15T23:59:59.000Z

    obtained for this study. 17 Scene 589-283, collected on January 20, 2005, covers approximately 80% of the study area and scene 590-283, collected on February 21, 2005, covers approximately 10% along the eastern side. The remaining 10%, located.... The remaining 10%, along the western 21 edge of the study area, was delineated manually using high resolution aerial photography and NAIP Imagery. Two pixel based classification approaches were investigated, supervised and unsupervised. In order...

  2. Industrial and Systems engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    members are nationally recognized experts in a broad range of research areas. From emergency services, Six-Sigma alumna NANCYPHILIPPART has been recognized by Automotive News as one of 100 leading women in the North

  3. Industrial - Utility Cogeneration Systems

    E-Print Network [OSTI]

    Harkins, H. L.

    1979-01-01T23:59:59.000Z

    Cogeneration may be described as an efficient method for the production of electric power in conjunction with process steam or heat which optimizes the energy supplied as fuel to maximize the energy produced for consumption. In a conventional...

  4. 614 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 53, NO. 2, APRIL 2006 Energy-Management System for a Hybrid Electric

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad CatĂłlica de Chile)

    614 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 53, NO. 2, APRIL 2006 Energy with poor specific power. The AES shown in Fig. 1 needs to be a high-specific power device

  5. 450 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 60, NO. 2, FEBRUARY 2013 A Novel Noninvasive Failure-Detection System

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad Católica de Chile)

    filters, high-voltage direct current and wind power conversion (energy industry), etc. [19]. In the mining 21, 2011; accepted January 1, 2012. Date of publication February 16, 2012; date of current version

  6. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01T23:59:59.000Z

    ISO 9000/14000 quality and environmental management systems,industrial quality and environmental management systems suchISO 9000/14000 quality and environmental management systems,

  7. A Study to Develop an Industrial-Scale, Computer-Controlled High Magnetic Field Processing (HMFP) System to Assist in Commercializing the Novel, Enabling HMFP Manufacturing Technology

    SciTech Connect (OSTI)

    Ludtka, Gail Mackiewicz- [ORNL; Chourey, Aashish [American Magnetics Inc.

    2010-08-01T23:59:59.000Z

    As the original magnet designer and manufacturer of ORNL s 9T, 5-inch ID bore magnet, American Magnetics Inc. (AMI) has collaborated with ORNL s Materials Processing Group s and this partnership has been instrumental in the development of our unique thermo-magnetic facilities and expertise. Consequently, AMI and ORNL have realized that the commercial implementation of the High Magnetic Field Processing (HMFP) technology will require the evolution of robust, automated superconducting (SC) magnet systems that will be cost-effective and easy to operate in an industrial environment. The goal of this project and CRADA is to significantly expedite the timeline for implementing this revolutionary and pervasive cross-cutting technology for future US produced industrial components. The successful completion of this project is anticipated to significantly assist in the timely commercialization and licensing of our HMFP intellectual property for a broad spectrum of industries; and to open up a new market for AMI. One notable outcome of this project is that the ThermoMagnetic Processing Technology WON a prestigious 2009 R&D 100 Awards. This award acknowledges and recognizes our TMP Technology as one of the top 100 innovative US technologies in 2009. By successfully establishing the design requirements for a commercial scale magnetic processing system, this project effort has accomplished a key first step in facilitating the building and demonstration of a superconducting magnetic processing coil, enabling the transition of the High Magnetic Field Processing Technology beyond a laboratory novelty into a commercially viable and industrially scalable Manufacturing Technology.

  8. SEQUENTIAL REGULARIZATION METHODS FOR SIMULATING MECHANICAL SYSTEMS WITH MANY CLOSED LOOPS

    E-Print Network [OSTI]

    Lin, Ping

    discretiza- tion schemes can generally be used, although in many applications in robotics and graphics ASCHER AND PING LIN SIAM J. SCI. COMPUT. c 1999 Society for Industrial and Applied Mathematics Vol. 21- body systems, robot simulation, constraint singularities AMS subject classifications. 65L10, 65L20 PII

  9. CIFMA04 -IFCAM04, 26-28 Avril/April 2010 1 Transforming your computer center to an Emulated Industrial

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Industrial Automation System (IAS) network performance and respond a lot of industrial interrogations, Industrial network. 1. Introduction The automation of industrial installations is nowadays ensured using automation system `IAS' architecture. Substation Automation System `SAS' is one of these industrial

  10. Waste Heat Management Options for Improving Industrial Process...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat Management Options for Improving Industrial Process Heating Systems Waste Heat Management Options for Improving Industrial Process Heating Systems This presentation covers...

  11. DOE to Launch Collaborative Effort with Industry to Improve Natural...

    Energy Savers [EERE]

    DOE to Launch Collaborative Effort with Industry to Improve Natural Gas Systems DOE to Launch Collaborative Effort with Industry to Improve Natural Gas Systems July 30, 2014 -...

  12. MUSIC GENRE CLASSIFICATION USING NOVEL FEATURES AND A WEIGHTED VOTING Dalwon Jang, Minho Jin, and Chang D. Yoo

    E-Print Network [OSTI]

    Yoo, Chang D.

    MUSIC GENRE CLASSIFICATION USING NOVEL FEATURES AND A WEIGHTED VOTING METHOD Dalwon Jang, Minho Jin classification system based on two novel features and a weighted voting method. The proposed features, modulation classification system. 1. INTRODUCTION With the recent proliferation of digital music, there is increas- ing

  13. Integration of heat pumps into industrial processes

    SciTech Connect (OSTI)

    Chappell, R.N. (USDOE, Washington, DC (USA)); Priebe, S.J. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

    1989-01-01T23:59:59.000Z

    The Department of Energy and others have funded studies to assess the potential for energy savings using industrial heat pumps. The studies included classifications of heat pumps, economic evaluations, and placement of heat pumps in industrial processes. Pinch technology was used in the placement studies to determine the placement, size, and type of heat pumps for a given applications. There appears to be considerable scope for heat pumping in several industries, but, where maximum process energy savings are desired, it is important to consider heat pumping in the context of overall process integration. 19 refs., 15 figs.

  14. A New Approach to Industrial Air Conditioning

    E-Print Network [OSTI]

    Gravenstreter, T.

    1982-01-01T23:59:59.000Z

    -dryer Systems Division, has marketed industrial drying machinery. These heat reactivated dryers can handle latent loads in industrial air conditioning systems. Through waste heat conservation, air conditioning costs can be reduced 25 to 50%, with applications...

  15. The Pacific Northwest National Laboratory delivers financially attractive systems that use biomass to produce industrial and consumer products.

    E-Print Network [OSTI]

    of renewable biomass resources. A New Approach to Biomass #12;To create new uses for agricultural products biomass to produce industrial and consumer products. While biomass holds potential for a ready supply of renewable energy, the primary success factor for this resource--the ability to profitably produce products

  16. Faculty of Engineering Industrial and Manufacturing

    E-Print Network [OSTI]

    Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

  17. Classification of fossil fuels according to structural-chemical characteristics

    SciTech Connect (OSTI)

    A.M. Gyul'maliev; G.S. Golovin; S.G. Gagarin [Institute for Fossil Fuels, Moscow (Russian Federation)

    2007-10-15T23:59:59.000Z

    On the basis of a set of linear equations that relate the amount of major elements n{sub E} (E = C, H, O, N, S) in the organic matter of fossil fuels to structural characteristics, such as the number of cycles R, the number of atoms n{sub E}, the number of mutual chemical bonds, the degree of unsaturation of the structure {delta}, and the extent of its reduction B, a structural-chemical classification of fossil coals that is closely related to the parameters of the industrial-genetic classification (GOST 25543-88) is proposed. Structural-chemical classification diagrams are constructed for power-generating coals of Russia; coking coals; and coals designed for nonfuel purposes including the manufacture of adsorbents, synthetic liquid fuel, ion exchangers, thermal graphite, and carbon-graphite materials.

  18. Development of a coal-fired combustion system for industrial process heating applications. Phase 3 final report, November 1992--December 1994

    SciTech Connect (OSTI)

    NONE

    1995-09-26T23:59:59.000Z

    A three phase research and development program has resulted in the development and commercialization of a Cyclone Melting System (CMS{trademark}), capable of being fueled by pulverized coal, natural gas, and other solid, gaseous, or liquid fuels, for the vitrification of industrial wastes. The Phase 3 research effort focused on the development of a process heater system to be used for producing value added glass products from the vitrification of boiler/incinerator ashes and industrial wastes. The primary objective of the Phase 3 project was to develop and integrate all the system components, from fuel through total system controls, and then test the complete system in order to evaluate its potential for successful commercialization. The demonstration test consisted of one test run with a duration of 105 hours, approximately one-half (46 hours) performed with coal as the primary fuel source (70% to 100%), the other half with natural gas. Approximately 50 hours of melting operation were performed vitrifying approximately 50,000 lbs of coal-fired utility boiler flyash/dolomite mixture, producing a fully-reacted vitrified product.

  19. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Endres. William J.

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve and ledges and clean fixtures. Maintain building entrances according to conditions by removing snow and ice

  20. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  1. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  2. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

  3. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  4. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  5. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE entrances according to conditions by removing snow and ice, applying sand and salt, and removing debris

  6. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

  7. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  8. A Study to Develop an Industrial-Scale, Computer-Controlled High Magnetic Field Processing (HMFP) System to Assist in Commercializing the Novel, Enabling HMFP Manufacturing Technology

    SciTech Connect (OSTI)

    Lutdka, G. M.; Chourey, A. (American Magnetics, Inc.)

    2010-05-12T23:59:59.000Z

    As the original magnet designer and manufacturer of ORNL’s 9T, 5-inch ID bore magnet, American Magnetics Inc. (AMI) has collaborated with ORNL’s Materials Processing Group’s and this partnership has been instrumental in the development of our unique thermo-magnetic facilities and expertise. Consequently, AMI and ORNL have realized that the commercial implementation of the High Magnetic Field Processing (HMFP) technology will require the evolution of robust, automated superconducting (SC) magnet systems that will be cost-effective and easy to operate in an industrial environment. The goal of this project and CRADA is to significantly expedite the timeline for implementing this revolutionary and pervasive cross-cutting technology for future US produced industrial components. The successful completion of this project is anticipated to significantly assist in the timely commercialization and licensing of our HMFP intellectual property for a broad spectrum of industries; and to open up a new market for AMI. One notable outcome of this project is that the ThermoMagnetic Processing Technology WON a prestigious 2009 R&D 100 Awards. This award acknowledges and recognizes our TMP Technology as one of the top 100 innovative US technologies in 2009. By successfully establishing the design requirements for a commercial scale magnetic processing system, this project effort has accomplished a key first step in facilitating the building and demonstration of a superconducting magnetic processing coil, enabling the transition of the High Magnetic Field Processing Technology beyond a laboratory novelty into a commercially viable and industrially scalable Manufacturing Technology.

  9. Guidelines for Estimating Unmetered Industrial Water Use

    SciTech Connect (OSTI)

    Boyd, Brian K.

    2010-08-01T23:59:59.000Z

    The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

  10. Waste classification sampling plan

    SciTech Connect (OSTI)

    Landsman, S.D.

    1998-05-27T23:59:59.000Z

    The purpose of this sampling is to explain the method used to collect and analyze data necessary to verify and/or determine the radionuclide content of the B-Cell decontamination and decommissioning waste stream so that the correct waste classification for the waste stream can be made, and to collect samples for studies of decontamination methods that could be used to remove fixed contamination present on the waste. The scope of this plan is to establish the technical basis for collecting samples and compiling quantitative data on the radioactive constituents present in waste generated during deactivation activities in B-Cell. Sampling and radioisotopic analysis will be performed on the fixed layers of contamination present on structural material and internal surfaces of process piping and tanks. In addition, dose rate measurements on existing waste material will be performed to determine the fraction of dose rate attributable to both removable and fixed contamination. Samples will also be collected to support studies of decontamination methods that are effective in removing the fixed contamination present on the waste. Sampling performed under this plan will meet criteria established in BNF-2596, Data Quality Objectives for the B-Cell Waste Stream Classification Sampling, J. M. Barnett, May 1998.

  11. Potential for supplying solar thermal energy to industrial unit operations

    SciTech Connect (OSTI)

    May, E.K.

    1980-04-01T23:59:59.000Z

    Previous studies have identified major industries deemed most appropriate for the near-term adoption of solar thermal technology to provide process heat; these studies have been based on surveys that followed standard industrial classifications. This paper presents an alternate, perhaps simpler analysis of this potential, considered in terms of the end-use of energy delivered to industrial unit operations. For example, materials, such as animal feed, can be air dried at much lower temperatures than are currently used. This situation is likely to continue while economic supplies of natural gas are readily available. However, restriction of these supplies could lead to the use of low-temperature processes, which are more easily integrated with solar thermal technology. The adoption of solar technology is also favored by other changes, such as the relative rates of increase of the costs of electricity and natural gas, and by energy conservation measures. Thus, the use of low-pressure steam to provide process heat could be replaced economically with high-temperature hot water systems, which are more compatible with solar technology. On the other hand, for certain operations such as high-temperature catalytic and distillation processes employed in petroleum refining, there is no ready alternative to presently employed fluid fuels.

  12. Incremental Accelerated Gradient Methods for SVM Classification ...

    E-Print Network [OSTI]

    2013-05-02T23:59:59.000Z

    SVM Classification: Study of the Constrained ... Vector Machines (SVM) for online classification tasks. ...... A Library for Support Vector Machines [8]. 11.

  13. Benefits Summary - Temporary Job Classification | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Temporary Job Classification Download a summary of benefits offered to employees in the temporary job classification (at least 6 months term and 20 hoursweek). 2015 Long Term...

  14. Burning Down the Shelf: Standardized Classification, Folksonomies, and Ontological Politics

    E-Print Network [OSTI]

    Lau, Andrew J.

    2008-01-01T23:59:59.000Z

    of Dewey Decimal Classification (DDC), Library of Congressstudies in critical classification. Library Resources and

  15. Trim or Replace Impellers on Oversized Pumps: Industrial Technologies Program (ITP) Pumping Systems Tip Sheet #7 (Fact Sheet)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic|IndustrialCenterMarch 4; RSVP by Feb. 27SolarDepartmentTribe's7 *

  16. Daylighting Application and Effectiveness in Industrial Facilities 

    E-Print Network [OSTI]

    McCowan, B.; Birleanu, D.

    2005-01-01T23:59:59.000Z

    artificial lighting became available, most older industrial buildings had their daylighting features boarded over. With modern glazing systems and sophisticated designs that minimize glare issues, daylighting for industrial buildings is making a strong...

  17. aircraft industry: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Repository Summary: industrial plants are: choice and optimization of technology, operating procedures and maintenance,industrial motor system optimization projects implemented...

  18. agate industry khambhat: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Repository Summary: industrial plants are: choice and optimization of technology, operating procedures and maintenance,industrial motor system optimization projects implemented...

  19. AMO Announces Successful Completion of Industrial-Scale Combined...

    Office of Environmental Management (EM)

    Announces Successful Completion of Industrial-Scale Combined Heat, Hydrogen, and Power System AMO Announces Successful Completion of Industrial-Scale Combined Heat, Hydrogen, and...

  20. MIT and Automotive Industries MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    MIT and Automotive Industries MIT Industry Brief MIT's Industrial Liaison Program (ILP) can bring@ilp.mit.edu, or visit http://ilp-www.mit.edu. MIT and Automotive Industries The Massachusetts Institute of Technology (MIT) is a leading center of research and education on topics important to the automotive industry

  1. Final Report, Materials for Industrial Heat Recovery Systems, Tasks 3 and 4 Materials for Heat Recovery in Recovery Boilers

    SciTech Connect (OSTI)

    Keiser, James R.; Kish, Joseph R.; Singh, Preet M.; Sarma, Gorti B.; Yuan, Jerry; Gorog, J. Peter; Frederick, Laurie A.; Jette, Francois R.; Meisner, Roberta A.; Singbeil, Douglas L.

    2007-12-31T23:59:59.000Z

    The DOE-funded project on materials for industrial heat recovery systems included four research tasks: materials for aluminum melting furnace recuperator tubes, materials and operational changes to prevent cracking and corrosion of the co-extruded tubes that form primary air ports in black liquor recovery boilers, the cause of and means to prevent corrosion of carbon steel tubes in the mid-furnace area of recovery boilers, and materials and operational changes to prevent corrosion and cracking of recovery boiler superheater tubes. Results from studies on the latter two topics are given in this report while separate reports on results for the first two tasks have already been published. Accelerated, localized corrosion has been observed in the mid-furnace area of kraft recovery boilers. This corrosion of the carbon steel waterwall tubes is typically observed in the vicinity of the upper level of air ports where the stainless clad co-extruded wall tubes used in the lower portion of the boiler are welded to the carbon steel tubes that extend from this transition point or “cut line” to the top of the boiler. Corrosion patterns generally vary from one boiler to another depending on boiler design and operating parameters, but the corrosion is almost always found within a few meters of the cut line and often much closer than that. This localized corrosion results in tube wall thinning that can reach the level where the integrity of the tube is at risk. Collection and analysis of gas samples from various areas near the waterwall surface showed reducing and sulfidizing gases were present in the areas where corrosion was accelerated. However, collection of samples from the same areas at intervals over a two year period showed the gaseous environment in the mid-furnace section can cycle between oxidizing and reducing conditions. These fluctuations are thought to be due to gas flow instabilities and they result in an unstable or a less protective scale on the carbon steel tubes. Also, these fluctuating air flow patterns can result in deposition of black liquor on the wall tubes, and during periods when deposition is high, there is a noticeable increase in the concentrations of sulfur-bearing gases like hydrogen sulfide and methyl mercaptan. Laboratory studies have shown that chromized and aluminized surface treatments on carbon steel improve the resistance to sulfidation attack. Studies of superheater corrosion and cracking have included laboratory analyses of cracked tubes, laboratory corrosion studies designed to simulate the superheater environment and field tests to study the movement of superheater tubes and to expose a corrosion probe to assess the corrosion behavior of alternate superheater alloys, particularly alloys that would be used for superheaters operating at higher temperatures and higher pressures than most current boilers. In the laboratory corrosion studies, samples of six alternate materials were immersed in an aggressive, low melting point salt mixture and exposed for times up to 336 h, at temperatures of 510, 530 or 560°C in an inert or reactive cover gas. Using weight change and results of metallographic examination, the samples were graded on their resistance to the various environments. For the superheater corrosion probe studies, samples of the same six materials were exposed on an air-cooled corrosion probe exposed in the superheater section of a recovery boiler for 1000 h. Post exposure examination showed cracking and/or subsurface attack in the samples exposed at the higher temperatures with the attack being more severe for samples 13 exposed above the first melting temperature of the deposits that collected on the superheater tubes. From these superheater studies, a ranking was developed for the six materials tested. The task addressing cracking and corrosion of primary air port tubes that was part of this project produced results that have been extensively implemented in recovery boilers in North America, the Nordic countries and many other parts of the world. By utilizing these results, boilers ar

  2. Profile of the rubber and plastics industry. EPA Office of Compliance sector notebook project

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    The rubber and miscellaneous plastics products industry, as defined by the Standard Industrial Classification (SIC) code 30, includes establishments that manufacture products from plastic resins, natural and synthetic rubber, reclaimed rubber, futta percha, balata, and gutta siak. The second section provides background information on the size, geographic distribution, employment, production, sales, and economic condition of the Rubber and Plastics Products industry. The type of facilities described within the document are also described in terms of their Standard Industrial Classification (SIC) codes. Additionally, this section contains a list of the largest companies in terms of sales.

  3. ITP Industrial Distributed Energy: Combined Heat & Power Multifamily Performance Program-- Sea Park East 150 kW CHP System

    Broader source: Energy.gov [DOE]

    Overview of Sea Park East 150 kilowatt (kW) Combined Heat and Power (CHP) System in Brooklyn, New York

  4. 1710 IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 39, NO. 6, NOVEMBER/DECEMBER 2003 An Integrated Flywheel Energy Storage System

    E-Print Network [OSTI]

    Sanders, Seth

    An Integrated Flywheel Energy Storage System With Homopolar Inductor Motor/Generator and High-Frequency Drive Abstract--The design, construction, and test of an integrated flywheel energy storage system that also serves as the energy storage rotor for the flywheel system. A high-frequency six-step drive scheme

  5. MECH 386 INDUSTRIAL FLUID MECHANICS INDUSTRIAL FLUID MECHANICS

    E-Print Network [OSTI]

    technologies - Wind turbine - Wave energy (Wells turbine) - Tidal power 7. Flow in porous media - Darcy's law 8 - Positive displacement pumps - Systems of pumps - Industrial practice (Guest speaker) 6. Renewable energy

  6. NIST Special Publication 800-82 Guide to Industrial Control

    E-Print Network [OSTI]

    Supervisory Control and Data Acquisition (SCADA) Systems, Distributed Control Systems (DCS), and Other Control to Industrial Control Systems (ICS) Security Supervisory Control and Data Acquisition (SCADA) systems

  7. On the algebraic classification of spacetimes

    E-Print Network [OSTI]

    V. Pravda

    2005-12-15T23:59:59.000Z

    We briefly overview the Petrov classification in four dimensions and its generalization to higher dimensions.

  8. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users The

  9. Industry @ ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users

  10. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFP »summerlectures [ICO]default Sign InIndustrial

  11. Innovative Energy Efficient Industrial Ventilation

    E-Print Network [OSTI]

    Litomisky, A.

    2005-01-01T23:59:59.000Z

    factories, we found striking dichotomy between the classical “static” design of ventilation systems and constantly changing workflow and business demands. Using data from real factories, we are able to prove that classical industrial ventilation design...

  12. The Team-Based Operation of Safety-Critical, Programmable Systems in US Commercial Aviation and the UK Maritime Industries

    E-Print Network [OSTI]

    Johnson, C.W.

    Johnson,C.W. In C.W. Johnson and P. Palanque (eds), Human Error, Safety and Systems Development pp 255-270 Kluwer

  13. The development of a coal-fired combustion system for industrial process heating applications. Quarterly technical progress report, January 1992--March 1992

    SciTech Connect (OSTI)

    Not Available

    1992-07-16T23:59:59.000Z

    PETC has implemented a number of advanced combustion research projects that will lead to the establishment of a broad, commercially acceptable engineering data base for the advancement of coal as the fuel of choice for boilers, furnaces, and process heaters. Vortec Corporation`s Coal-Fired Combustion System for Industrial Process Heating Applications has been selected for Phase III development under contract DE-AC22-91PC91161. This advanced combustion system research program is for the development of innovative coal-fired process heaters which can be used for high temperature melting, smelting, recycling, and refining processes. The process heater concepts to be developed are based on advanced glass melting and ore smelting furnaces developed and patented by Vortec Corporation. The process heater systems to be developed have multiple use applications; however, the Phase HI research effort is being focused on the development of a process heater system to be used for producing glass frits and wool fiber from boiler and incinerator ashes. The primary objective of the Phase III project is to develop and integrate all the system components, from fuel through total system controls, and then test the complete system in order to evaluate its potential marketability. The economic evaluation of commercial scale CMS processes has begun. In order to accurately estimate the cost of the primary process vessels, preliminary designs for 25, 50, and 100 ton/day systems have been started under Task 1. This data will serve as input data for life cycle cost analysis performed as part of techno-economic evaluations. The economic evaluations of commercial CMS systems will be an integral part of the commercialization plan.

  14. MultiCriteria Clustering & Classification

    E-Print Network [OSTI]

    Libre de Bruxelles, Université

    An Extension of the K-Means' algorithm MultiCriteria Ordered Clustering 6 MCDA Classification : Sorting MCDACriteria Comparison : motivation A MCDA approach for grouping problems 5 MCDA Clustering Multicriteria Clustering

  15. Lecture Ch. 8 Cloud Classification

    E-Print Network [OSTI]

    Russell, Lynn

    clouds Middle clouds Grayish, block the sun, sometimes patchy Sharp outlines, rising, bright white1 Lecture Ch. 8 · Cloud Classification ­ Descriptive approach to clouds · Drop Growth and Precipitation Processes ­ Microphysical characterization of clouds · Complex (i.e. Real) Clouds ­ Examples

  16. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Endres. William J.

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere to current uniform

  17. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month/40 and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

  18. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month and ice, applying sand and salt, and removing debris. Adhere to current department uniform policy supervision may be exercised over seasonal/temporary university employees and student assistants

  19. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 mos and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

  20. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month/20 hours and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

  1. Hierarchical classification of modulation signals

    E-Print Network [OSTI]

    Kim, Nam Jin

    2002-01-01T23:59:59.000Z

    This thesis addresses the problem of classifying both analog and digital modulation signals using different kinds of classifiers. The classification of modulation signals has both civilian and military applications. A total of 31 statistical signal...

  2. Title: Designing Energy-Efficient Information Processing Systems Abstract: The semiconductor industry is facing some extraordinary challenges, including process and

    E-Print Network [OSTI]

    Title: Designing Energy-Efficient Information Processing Systems Abstract: The semiconductor. It is against this backdrop that I provide examples of some techniques used to improve the energy efficiency's research focuses on energy-efficient computing, energy storage systems, low power electronics and design

  3. Remote foods shopping robot system in a supermarket Tetsuo TOMIZAWA, National Inst. of Advanced Industrial Science and Technology

    E-Print Network [OSTI]

    Ohya, Akihisa

    Remote foods shopping robot system in a supermarket Tetsuo TOMIZAWA, National Inst as a teleoperated tool for accessing and manipulating remote objects. This system attempts to answer the challenge in this research is to help people buy fresh food in a supermarket from a remote location using the Internet. We

  4. Analysis of concentrating PV-T systems for the commercial/industrial sector. Volume III. Technical issues and design guidance

    SciTech Connect (OSTI)

    Schwinkendorf, W.E.

    1984-09-01T23:59:59.000Z

    This report provide appropriate guidance for addressing the major technical issues associated with the design and installation of a photovoltaic-thermal (PV-T) system. Nomographs are presented for developing preliminary sizing and costing, and issues associated with specific components and the overall design of the electrical and mechanical system are discussed. SAND82-7157/2 presents a review of current PV-T technology and operating systems and a study of potential PV-T applications. Detailed PV-T system designs for three selected applications and the results of a trade-off study for these applications are presented in SAND82-7157/4. A summary of the major results of this entire study and conclusions concerning PV-T systems and applications is presented in SAND82-7157/1.

  5. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  6. Industrial Decision Making 

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01T23:59:59.000Z

    and industrial investment decision-making. The paper will also address several important questions: • Why has industrial investment declined? • What is the outlook for industrial investment? • How can programs engage industry for future opportunities?...

  7. The US Motor Systems Market Assessment: Baseline and Survey Methods

    E-Print Network [OSTI]

    Rosenberg, M.

    of industrial motor systems. (E-Source 1993; EPRI 1992; Nadel et al. 1992; Easton Consultants 1996) These publications take as their principal point of departure the 1980 study Classification and Evaluation ofElectric Motors and Pumps sponsored... of motor drive energy among the three major application groups for the four manufacturing sectors and for manufacturing facilities as a whole. These estimates are drawn from the Midwest database and the EPRI Electric Motors Study (1992). The results...

  8. Atmospheric fluidized bed combustion advanced system concepts applicable to small industrial and commercial markets. Topical report, Level 2

    SciTech Connect (OSTI)

    Ake, T.R.; Dixit, V.B.; Mongeon, R.K.

    1992-09-01T23:59:59.000Z

    As part of an overall strategy to promote FBC coal combustion and to improve the marketability of the eastern coals, the US Department of Energy`s Morgantown Energy Research Center awarded a three level contract to Riley Stoker Corporation to develop advanced Multi Solids Fluidized Bed (MSFB) boiler designs. The first level of this contract targeted the small package boiler (10,000--50,000 lb/hr steam) and industrial size boiler (75,000--150,000 lb/hr steam) markets. Two representative sizes, 30,000 lb/hr and 110,000 lb/hr of steam, were selected for the two categories for a detailed technical and economic evaluation. Technically, both the designs showed promise, however, the advanced industrial design was favored on economic considerations. It was thus selected for further study in the second level of the contract. Results of this Level-2 effort, presented in this report, consisted of testing the design concept in Riley`s 4.4 MBtu/hr pilot MSFB facility located at Riley Research Center in Worcester, Mass. The design and economics of the proof of concept facility developed in Level-1 of the contract were then revised in accordance with the findings of the pilot test program. A host site for commercial demonstration in Level-3 of the contract was also secured. It was determined that co-firing coal in combination with paper de-inking sludge will broaden the applicability of the design beyond conventional markets. International Paper (IP), the largest paper company in the world, is willing to participate in this part of the program. IP has offered its Hammermill operation at Lockhaven, Pa, site of a future paper de-inking plant, for the proof of concept installation. This plant will go in operation in 1994. It is recommended that METC proceed to the commercial demonstration of the design developed. The approach necessary to satisfy the needs of the customer while meeting the objectives of this program is presented along with a recommended plan of action.

  9. Data driven process monitoring based on neural networks and classification trees

    E-Print Network [OSTI]

    Zhou, Yifeng

    2005-11-01T23:59:59.000Z

    of this dissertation is to develop process monitoring schemes that can be applied to complex process systems. Neural networks have been a popular tool for modeling and pattern classification for monitoring of process systems. However, due to the prohibitive...

  10. kenmerk 369.075 1 RULES FOR CLASSIFICATION AND RANKING OF STAFF

    E-Print Network [OSTI]

    Twente, Universiteit

    , a new job classification system (UFO) came into force. As a result of the introduction of UFO, old job jobs are ranked. At several levels the introduction of UFO has consequences for the classification for the application of UFO is the job. This is the `cluster of tasks to be performed by the employee based

  11. Proceedings of the 1997 IEEE International Conference on Systems, Man, and Cybernetics (SMC'97) . Orlando, FL . Oct. 1215, 1997 DATA REPRESENTATION AND ORGANIZATION FOR AN INDUSTRIAL MULTISENSOR

    E-Print Network [OSTI]

    Naish, Michael D.

    INTEGRATION ARCHITECTURE Michael D. Naish and Elizabeth A. Croft Industrial Automation Laboratory Department) . Orlando, FL . Oct. 12­15, 1997 DATA REPRESENTATION AND ORGANIZATION FOR AN INDUSTRIAL MULTISENSOR@mech.ubc.ca ABSTRACT An open architecture for intelligent multisensor integra­ tion in an industrial environment

  12. Industrial ecology Prosperity Game{trademark}

    SciTech Connect (OSTI)

    Beck, D.; Boyack, K.; Berman, M.

    1998-03-01T23:59:59.000Z

    Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

  13. Coal-Based Oxy-Fuel System Evaluation and Combustor Development; Oxy-Fuel Turbomachinery Development for Energy Intensive Industrial Applications

    SciTech Connect (OSTI)

    Hollis, Rebecca

    2013-03-31T23:59:59.000Z

    Clean Energy Systems, Inc. (CES) partnered with the U.S. Department of Energy’s National Energy Technology Laboratory in 2005 to study and develop a competing technology for use in future fossil-fueled power generation facilities that could operate with near zero emissions. CES’s background in oxy-fuel (O-F) rocket technology lead to the award of Cooperative Agreement DE-FC26-05NT42645, “Coal-Based Oxy-Fuel System Evaluation and Combustor Development,” where CES was to first evaluate the potential of these O-F power cycles, then develop the detailed design of a commercial-scale O-F combustor for use in these clean burning fossil-fueled plants. Throughout the studies, CES found that in order to operate at competitive cycle efficiencies a high-temperature intermediate pressure turbine was required. This led to an extension of the Agreement for, “Oxy-Fuel Turbomachinery Development for Energy Intensive Industrial Applications” where CES was to also develop an intermediate-pressure O-F turbine (OFT) that could be deployed in O-F industrial plants that capture and sequester >99% of produced CO2, at competitive cycle efficiencies using diverse fuels. The following report details CES’ activities from October 2005 through March 2013, to evaluate O-F power cycles, develop and validate detailed designs of O-F combustors (main and reheat), and to design, manufacture, and test a commercial-scale OFT, under the three-phase Cooperative Agreement.

  14. Abstract--It is now widely accepted within the electrical power supply industry that future power systems will operate with

    E-Print Network [OSTI]

    Taylor, Gary

    . Hobson, C. Huang, P. Kyberd and R. J. Taylor, Sensors & Instrumentation Research Group, Brunel University was supported in part by the EU under the GRIDCC Grant. G. A. Taylor and M. R. Irving, Brunel Institute of Power Systems, Brunel University, Uxbridge, Middlesex, UB8 3PH, UK (e-mail: Gareth.Taylor@brunel.ac.uk). P. R

  15. Int. J. Industrial and Systems Engineering, Vol. X, No. X, xxxx 1 Copyright 20xx Inderscience Enterprises Ltd.

    E-Print Network [OSTI]

    speed; modelling and simulation; Weibull probability density function; sustainability; renewable energy in the area of manufacturing systems modelling, simulation and optimisation, intelligent scheduling/renewable energy. In this paper, we analysed wind speed data from 21 major Canadian airports over 1971

  16. The 1993 nutrition label: development of a rating system and a perspective by nutrition and food industry professionals

    E-Print Network [OSTI]

    Osborn, Lacye Ann

    1994-01-01T23:59:59.000Z

    for scoring. Each component was given points of 0, 25, 50, 75 or 100 according to the amount present. A score was assigned based on an average of the points. When incorporated with the existing label, the scoring system could be very useful to consumers while...

  17. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 54, NO. 1, FEBRUARY 2007 97 Distributed Intelligent Energy Management System

    E-Print Network [OSTI]

    Simőes, Marcelo Godoy

    are very important for the Micro- grid. The majority of microsources must be power electronic based in the battery life is also achieved due to optimization of storage charge states using the proposed DIEMS. Index and the grid. The advantages and considerations of HFAC system will be addressed in this paper along

  18. Status of State Electric Industry Restructuring Activity

    Reports and Publications (EIA)

    2010-01-01T23:59:59.000Z

    Presents an overview of the status of electric industry restructuring in each state. Restructuring means that a monopoly system of electric utilities has been replaced with competing sellers.

  19. Industrial Customer Perspectives on Utility Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Customer Perspectives on Utility Energy Efficiency Programs Industrial Customer Perspectives on Utility Energy Efficiency Programs These presentations from ATK Aerospace Systems,...

  20. In this paper we describe a generalized classification method for HMM-based speech recognition systems, that uses free energy as

    E-Print Network [OSTI]

    Singh, Rita

    recognition systems, that uses free energy as a discriminant function rather than conventional probabilities negative free energy [2] of the HMM at a temperature . Consequently, MAP classifica- tion is equivalent to minimizing the free energy of the classifier with respect to the class at T = 1. In speech recognition

  1. Single particle counting diagnostic system for measuring fine particulates at high number densities in research and industrial applications. Final report summarizing instrument development, validation and operating instructions

    SciTech Connect (OSTI)

    Holve, D.J.

    1983-10-01T23:59:59.000Z

    Optical methods for particle size distribution measurements in practical high temperature environments have achieved feasibility and offer significant advantages over conventional sampling methods. The present report describes a mobile electro-optical system which has been designed for general use in a wide range of research and industrial environments. Specific features of this system include a method of providing in situ alignment and incorporation of an extinction measurement for application to optically thick aerosol flows. The instrument has demonstrated capability for measuring individual particles in the size range 0.25 to 100 microns at number densities up to 10/sup 12//m/sup 3/. In addition to demonstration of the system's wide dynamic range, we show the utility of the in situ alignment method in hot (1100 K) turbulent flows where beam steering can be a problem. As an example of the instrument's application, number and mass frequency distribution measurements of flyash and pulverized coal obtained in an atmospheric combustion exhaust simulator show that the raw pulverized coal contains large numbers of submicron particles similar to the flyash formed after combustion.

  2. Position Management and Classification

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-10-30T23:59:59.000Z

    The Order establishes Departmental requirements and responsibilities for classifying positions using the General Schedule (GS) and the Federal Wage System (FWS) standards.

  3. Save Energy Now in Your Process Heating Systems; Industrial Technologies Program (ITP) BestPractices: Process Heating (Fact sheet)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy atLLC - FE DKT. 10-160-LNG -EnergyProcess Heating Systems Process heating

  4. Save Energy Now in Your Steam Systems; Industrial Technologies Program (ITP) BestPractices: Process Heating (Fact sheet)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy atLLC - FE DKT. 10-160-LNG -EnergyProcess Heating Systems ProcessSteam

  5. T.T.T.Nguyen, G.Armitage, A Survey of Techniques for Internet Traffic Classification using Machine Learning A Survey of Techniques for Internet Traffic

    E-Print Network [OSTI]

    Armitage, Grenville

    of their various business goals. Traffic classification may be a core part of automated intrusion detection systemsT.T.T.Nguyen, G.Armitage, A Survey of Techniques for Internet Traffic Classification using Machine Learning A Survey of Techniques for Internet Traffic Classification using Machine Learning Thuy T.T. Nguyen

  6. Geometrical classification of Killing tensors on bidimensional flat manifolds

    E-Print Network [OSTI]

    C. Chanu; L. Degiovanni; R. G. McLenaghan

    2006-08-31T23:59:59.000Z

    Valence two Killing tensors in the Euclidean and Minkowski planes are classified under the action of the group which preserves the type of the corresponding Killing web. The classification is based on an analysis of the system of determining partial differential equations for the group invariants and is entirely algebraic. The approach allows to classify both characteristic and non characteristic Killing tensors.

  7. Comprehensive Superfamily and Function Classification of Protein Sequences

    E-Print Network [OSTI]

    on the basis of end-to-end similarity and domain architecture. The protein superfamily organization of the PIR-International Protein Sequence Database (PIR-PSD) is the only comprehensive protein classification system that is based are facilitated by the PIR Annotation and Similarity Database, which includes a pre- computed FASTA Database

  8. Storage Device Performance Prediction with Selective Bagging Classification and Regression

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Storage Device Performance Prediction with Selective Bagging Classification and Regression Tree Lei}@eng.wayne.edu, cheneh@ustc.edu.cn Abstract. Storage device performance prediction is a key element of self-managed storage systems and application planning tasks, such as data assignment and configuration. Based

  9. AUTOMATIC TV LOGO DETECTION AND CLASSIFICATION IN BROADCAST VIDEOS

    E-Print Network [OSTI]

    AUTOMATIC TV LOGO DETECTION AND CLASSIFICATION IN BROADCAST VIDEOS Nedret ¨OZAY, B¨ulent SANKUR In this study1 , we present a fully automatic TV logo iden- tification system. TV logos are detected in static of a logo candidate is established, TV logos are recognized via their subspace fea- tures. Comparative

  10. Reflectance Function Approximation for Material Classification

    E-Print Network [OSTI]

    Dyer, Charles R.

    Reflectance Function Approximation for Material Classification Edward Wild CS 766 Final Project This report summarizes the results of a project to approximate reflectance functions and classify materials to classify materials. Classification algorithms are proposed to deal with unseen materials. Experimental

  11. Brain MRI Classification using the Expectation Maximization

    E-Print Network [OSTI]

    Chen, Tsuhan

    Brain MRI Classification using the Expectation Maximization made a brain magnetic resonance image (MRI) classification algorithm that uses a twostage applied to a set of normal brain MR images for further testing. We accomplished a working

  12. Maturing Software Engineering Knowledge through Classifications

    E-Print Network [OSTI]

    Basili, Victor R.

    Maturing Software Engineering Knowledge through Classifications: A Case Study on Unit Testing contribution to advancing knowledge in both science and engineering. It is a way of investigating Engineering knowledge, as classifications constitute an organized structure of knowledge items. Till date

  13. Industrial Engineering Roles In Industry

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    , be they processes, products or systems · Typical focus areas include: ­ Project Management ­ Manufacturing ­ Quality Measurement and Improvement ­ Program Management ­ Ergonomics/Human Factors ­ Technology, Production and Distribution ­ Supply Chain Management ­ Productivity, Methods and Process Engineering

  14. Columbia River System Operation Review : Final Environmental Impact Statement, Appendix F: Irrigation, Municipal and Industrial/Water Supply.

    SciTech Connect (OSTI)

    Columbia River System Operations Review (U.S.); United States. Bonneville Power Administration; United States. Army. Corps of Engineers. North Pacific Division; United States. Bureau of Reclamation. Pacific Northwest Region.

    1995-11-01T23:59:59.000Z

    Since the 1930`s, the Columbia River has been harnessed for the benefit of the Northwest and the nation. Federal agencies have built 30 major dams on the river and its tributaries. Dozens of non-Federal projects have been developed as well. The dams provide flood control, irrigation, navigation, hydro-electric power generation, recreation, fish and wildlife, and streamflows for wildlife, anadromous fish, resident fish, and water quality. This is Appendix F of the Environmental Impact Statement for the Columbia River System, focusing on irrigation issues and concerns arrising from the Irrigation and Mitigation of impacts (M&I) working Group of the SOR process. Major subheadings include the following: Scope and process of irrigation/M&I studies; Irrigation/M&I in the Columbia Basin Today including overview, irrigated acreage and water rights, Irrigation and M&I issues basin-wide and at specific locations; and the analysis of impacts and alternative for the Environmental Impact Statement.

  15. Superconducting magnetic control system for manipulation of particulate matter and magnetic probes in medical and industrial applications

    DOE Patents [OSTI]

    Cha, Yung Sheng; Hull, John R.; Askew, Thomas R.

    2006-07-11T23:59:59.000Z

    A system and method of controlling movement of magnetic material with at least first and second high temperature superconductors at spaced locations. A plurality of solenoids are associated with the superconductors to induce a persistent currents in preselected high temperature superconductors establishing a plurality of magnetic fields in response to pulsed currents introduced to one or more of the solenoids. Control mechanism in communication with said solenoids and/or said high temperature superconductors are used to demagnetize selected ones of the high temperature superconductors to reduce the magnetic fields substantially to zero. Magnetic material is moved between magnetic fields by establishing the presence thereof and thereafter reducing magnetic fields substantially to zero and establishing magnetic fields in other superconductors arranged in a predetermined configuration.

  16. Topological classification of crystalline insulators with space group symmetry

    SciTech Connect (OSTI)

    Jadaun, Priyamvada [University of Texas at Austin; Xiao, Di [Carnegie Mellon University (CMU); Niu, Q. [University of Texas at Austin; Banerjee, Sanjay K. [University of Texas at Austin

    2013-01-01T23:59:59.000Z

    We show that in crystalline insulators, space group symmetry alone gives rise to a topological classification based on the discretization of electric polarization. Using C3 rotational symmetry as an example, we first prove that the polarization is discretized into three distinct classes, i.e., it can only take three inequivalent values. We then prove that these classes are topologically distinct. Therefore, a Z3 topological classification exists, with polarization as a topological class index. A concrete tight-binding model is derived to demonstrate the Z3 topological phase transition. Using first-principles calculations, we identify graphene on a BN substrate as a possible candidate to realize these Z3 topological states. To complete our analysis, we extend the classification of band structures to all 17 two-dimensional space groups. This work will contribute to a complete theory of symmetry-conserved topological phases and also elucidate topological properties of graphenelike systems.

  17. Comparison: Meningioma Classification using Wavelet Packets and Normal Texture based Classification

    E-Print Network [OSTI]

    Qureshi, Hammad

    Energy Based Classification Accuracy 0 20 40 60 80 100 120 F M P T Overall Meningiomas %Accuracy RawComparison: Meningioma Classification using Wavelet Packets and Normal Texture based Classification performed better were obtained from each · Classification using k-nn (leave one out). Introduction

  18. Optimization Online - Classification with Guaranteed Probability of ...

    E-Print Network [OSTI]

    Marco C. Campi

    2009-03-18T23:59:59.000Z

    Mar 18, 2009 ... Classification with Guaranteed Probability of Error. Marco C. ... Category 3: Applications -- Science and Engineering (Statistics ). Citation:.

  19. Multicriteria Inventory Classification Using A Genetic Algorithm

    E-Print Network [OSTI]

    GĂĽvenir, H. Altay

    Multicriteria Inventory Classification Using A Genetic Algorithm H. Altay Guvenir a;1 , and Erdal. The new crossover technique is applied to the prob­ lem of multicriteria inventory classification. The results are compared with the classical inventory classification technique using Analytical Hierarchy

  20. Hierarchical Classification of Documents with Error Control

    E-Print Network [OSTI]

    Fu, Ada Waichee

    Hierarchical Classification of Documents with Error Control Chun­hung Cheng 1 , Jian Tang 2 , Ada. Classification is a function that matches a new object with one of the predefined classes. Document classification is characterized by the large number of attributes involved in the objects (documents

  1. Remote Sensing Ayman F. Habib Image Classification

    E-Print Network [OSTI]

    Habib, Ayman

    1 Remote Sensing Ayman F. Habib 1 Chapter 6 Image Classification Remote Sensing Ayman F. Habib 2. ­ Unsupervised classification. · Accuracy assessment. #12;2 Remote Sensing Ayman F. Habib 3 Image Classification of image pixels is based on their digital numbers/grey values in one or more spectral bands. Remote Sensing

  2. THE UNIVERSITY OF CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Portman, Douglas

    1 THE UNIVERSITY OF ROCHESTER CLASSIFICATION DESCRIPTION TITLE: Web Specialist and Analyst DATE: 01 ­ Advancement Service and provide assistance in the development and management of web-based assets, direct solicitations support ­ webpages for print and e-mail marketing support, web development, Share

  3. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION Job Title: STAFF ASSISTANT (N6) Department: J. ROBERT VAN PELT LIBRARY Hourly Rate: MINIMUM $12.65 ­ MAXIMUM $16.20 Supervisor: STRATEGIC INITIATIVES LIBRARIAN SUMMARY: This position participates in a variety of digital library and service

  4. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Endres. William J.

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: BUILDING MECHANIC II (pay: Accountable for supervision and maintenance of all operating units in the SDC, MacInnes Ice Arena, Child Care, maintenance, sanitation, customer services and enforcement of SDC, MacInnes Ice Arena, Child Care Center

  5. Electric Utility Industry Update

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

  6. Uranium industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-04-01T23:59:59.000Z

    This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

  7. CASL Industry Council Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IndustryCouncil.shtml The new members that joined the Industry Council include NPP owneroperators with analysis capability: Tyrone Stevens of Exelon, and SMR vendors:...

  8. March 23, 2008 Databases: Information Systems 1 Information Systems

    E-Print Network [OSTI]

    Adam, Salah

    March 23, 2008 Databases: Information Systems 1 Information Systems #12;March 23, 2008 Databases: Information Systems 2 Objectives What is an Information System (IS) + Classification of Information Systems + Evolution of Information Systems + Information System Management + Performance Requirements of ISs + #12

  9. Cogeneration: An Industrial Steam and Power Option

    E-Print Network [OSTI]

    Orlando, J. A.; Stewart, M. M.; Roberts, J. R.

    Industrial facilities of all sizes have the ability to reduce and better control both power and steam costs with a cogeneration system. Unlike the larger systems that sell almost all of the cogenerated power to a regulated electric utility...

  10. The Solarex Solar Power Industrial Facility

    E-Print Network [OSTI]

    Macomber, H. L.; Bumb, D. R.

    1984-01-01T23:59:59.000Z

    The Solarex Corporation has designed, built and operated an industrial facility which is totally powered by a Solarex solar electric power system. The solar power system, energy-conserving building and manufacturing operations were treated as a...

  11. UNIVERSITY OF MASSACHUSETTS Department of Mechanical AMHERST and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    UNIVERSITY OF MASSACHUSETTS Department of Mechanical AMHERST and Industrial Engineering Engineering Position in Mechanical and Industrial Engineering The Department of Mechanical and Industrial Engineering in the area of systems engineering. Individuals will be considered in any area of basic research in industrial

  12. Industry Analysis February 2013

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    technology ­ Clean tech/ clean technology #12;7 Industry Studies · IbisWorld ­ U.S. and global industry-Industries · Biodiesel ­ Biofuel ­ Alternate fuels ­ Green fuels ­ Renewable fuels/energy ­ Green energy ­ Green Canada, Census, Industry Canada, the OECD, European Union, IMF, World Bank, UN . . . Never pay for stats

  13. Featureless Classification of Light Curves

    E-Print Network [OSTI]

    Kügler, Sven Dennis; Polsterer, Kai Lars

    2015-01-01T23:59:59.000Z

    In the era of rapidly increasing amounts of time series data, classification of variable objects has become the main objective of time-domain astronomy. Classification of irregularly sampled time series is particularly difficult because the data can not be represented naturally as a plain vector which directly can be fed into a classifier. In the literature, various statistical features derived from time series serve as a representation. Typically, the usefulness of the derived features is judged in an empirical fashion according to their predictive power. In this work, an alternative to the feature-based approach is investigated. In this new representation the time series is described by a density model. Similarity between each pair of time series is quantified by the distance between their respective models. The density model captures all the information available, also including measurement errors. Hence, we view this model as a generalisation to the static features which directly can be derived, e.g., as ...

  14. Classification of subsurface objects using singular values derived from signal frames

    DOE Patents [OSTI]

    Chambers, David H; Paglieroni, David W

    2014-05-06T23:59:59.000Z

    The classification system represents a detected object with a feature vector derived from the return signals acquired by an array of N transceivers operating in multistatic mode. The classification system generates the feature vector by transforming the real-valued return signals into complex-valued spectra, using, for example, a Fast Fourier Transform. The classification system then generates a feature vector of singular values for each user-designated spectral sub-band by applying a singular value decomposition (SVD) to the N.times.N square complex-valued matrix formed from sub-band samples associated with all possible transmitter-receiver pairs. The resulting feature vector of singular values may be transformed into a feature vector of singular value likelihoods and then subjected to a multi-category linear or neural network classifier for object classification.

  15. Class Discovery in Galaxy Classification

    E-Print Network [OSTI]

    David Bazell; David J. Miller

    2004-06-14T23:59:59.000Z

    In recent years, automated, supervised classification techniques have been fruitfully applied to labeling and organizing large astronomical databases. These methods require off-line classifier training, based on labeled examples from each of the (known) object classes. In practice, only a small batch of labeled examples, hand-labeled by a human expert, may be available for training. Moreover, there may be no labeled examples for some classes present in the data, i.e. the database may contain several unknown classes. Unknown classes may be present due to 1) uncertainty in or lack of knowledge of the measurement process, 2) an inability to adequately ``survey'' a massive database to assess its content (classes), and/or 3) an incomplete scientific hypothesis. In recent work, new class discovery in mixed labeled/unlabeled data was formally posed, with a proposed solution based on mixture models. In this work we investigate this approach, propose a competing technique suitable for class discovery in neural networks, and evaluate both methods for classification and class discovery on several astronomical data sets. Our results demonstrate up to a 57% reduction in classification error compared to a standard neural network classifier that uses only labeled data.

  16. The Food and Fiber System and Production Agriculture's Contributions to the Texas Economy

    E-Print Network [OSTI]

    Nelson, Gene

    2004-12-01T23:59:59.000Z

    in the food and fiber sector's contribution from 1999 to 2001 can be attributed to a 5.8 percent annual growth in the state's economy over the period, while the growth in the food and fiber sector was just over 2 per- cent annually. Most of the growth... in the state's economy occurred in the retail sector, F.I.R.E., and services. Figure 2 compares the contribution of the food and fiber system to the other industries that make up the state?s economy. The largest single industry classification is services...

  17. RESULTS OF THE TECHNICAL AND ECONOMIC FEASIBILITY ANALYSIS FOR A NOVEL BIOMASS GASIFICATION-BASED POWER GENERATION SYSTEM FOR THE FOREST PRODUCTS INDUSTRY

    SciTech Connect (OSTI)

    Bruce Bryan; Joseph Rabovitser; Sunil Ghose; Jim Patel

    2003-11-01T23:59:59.000Z

    In 2001, the Gas Technology Institute (GTI) entered into Cooperative Agreement DE-FC26-01NT41108 with the U.S. Department of Energy (DOE) for an Agenda 2020 project to develop an advanced biomass gasification-based power generation system for near-term deployment in the Forest Products Industry (FPI). The advanced power system combines three advanced components, including biomass gasification, 3-stage stoker-fired combustion for biomass conversion, and externally recuperated gas turbines (ERGTs) for power generation. The primary performance goals for the advanced power system are to provide increased self-generated power production for the mill and to increase wastewood utilization while decreasing fossil fuel use. Additional goals are to reduce boiler NOx and CO{sub 2} emissions. The current study was conducted to determine the technical and economic feasibility of an Advanced Power Generation System capable of meeting these goals so that a capital investment decision can be made regarding its implementation at a paper mill demonstration site in DeRidder, LA. Preliminary designs and cost estimates were developed for all major equipment, boiler modifications and balance of plant requirements including all utilities required for the project. A three-step implementation plan was developed to reduce technology risk. The plant design was found to meet the primary objectives of the project for increased bark utilization, decreased fossil fuel use, and increased self-generated power in the mill. Bark utilization for the modified plant is significantly higher (90-130%) than current operation compared to the 50% design goal. For equivalent steam production, the total gas usage for the fully implemented plant is 29% lower than current operation. While the current average steam production from No.2 Boiler is about 213,000 lb/h, the total steam production from the modified plant is 379,000 lb/h. This steam production increase will be accomplished at a grate heat release rate (GHRR) equal to the original boiler design. Boiler efficiencies (cogeneration-steam plus air) is increased from the original design value of 70% to 78.9% due to a combination of improved burnout, operation with lower excess air, and drier fuel. For the fully implemented plant, the thermal efficiency of fuel to electricity conversion is 79.8% in the cogeneration mode, 5% above the design goal. Finally, self-generated electricity will be increased from the 10.8 MW currently attributable to No.2 Boiler to 46.7MW, an increase of 332%. Environmental benefits derived from the system include a reduction in NOx emissions from the boiler of about 30-50% (90-130 tons/year) through syngas reburning, improved carbon burnout and lower excess air. This does not count NOx reduction that may be associated with replacement of purchased electricity. The project would reduce CO{sub 2} emissions from the generation of electricity to meet the mill's power requirements, including 50,000 tons/yr from a net reduction in gas usage in the mill and an additional 410,000 tons/yr reduction in CO{sub 2} emissions due to a 34 MW reduction of purchased electricity. The total CO{sub 2} reduction amounts to about 33% of the CO{sub 2} currently generated to meet the mills electricity requirement. The overall conclusion of the study is that while significant engineering challenges are presented by the proposed system, they can be met with operationally acceptable and cost effective solutions. The benefits of the system can be realized in an economic manner, with a simple payback period on the order of 6 years. The results of the study are applicable to many paper mills in the U.S. firing woodwastes and other solid fuels for steam and power production.

  18. Analysis of the impacts of Internet-based business activities on the container shipping industry : the system dynamics modeling approach with the framework of technological evolution

    E-Print Network [OSTI]

    Auh, Jae Hyuck, 1969-

    2003-01-01T23:59:59.000Z

    The internet-based business (e-business) activities have become a new technological challenge to the container shipping industry (CSI) in recent years. Despite the growing importance of e-business in the CSI, little ...

  19. Energy efficient industrialized housing research program

    SciTech Connect (OSTI)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; Mc Donald, M.; McGinn, B.; Ryan, P.; Sekiguchi, T. (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-01-01T23:59:59.000Z

    This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

  20. The industrial Center at Mississippi State University

    SciTech Connect (OSTI)

    b.K. Hodge; Mary C. Emplaincourt

    2007-04-30T23:59:59.000Z

    The Mississippi State University Industrial Assessment Center (IAC) is one of 26 centers supported by the U.S. Department of Energy (DOE) at universities across the country. The Mississippi State University IAC in existence since 1994 provides plant assessments at no cost to eligible small and mid-sized manufacturers categorized in Standard Industrial Classification (SIC) Codes 20-39. Client eligibility is based on gross sales below $100 million, fewer than 500 employees at the plant, annual utility bills more than $100,000 and less than $2 million, and no in-house professional staff to perform an assessment. IAC assessment benefits include no cost to the clients, increased profitability and competitiveness, confidentiality, non-regulatory, nonobligatory, and student involvement.