Sample records for industrial classification manual

  1. Classification of Information Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1985-05-08T23:59:59.000Z

    To specify responsibilities, authorities, policy, and procedures for the management of the Department of Energy (DOE) classification system. Cancels DOE O 5650.2, dated 12-12-1978. Canceled by DOE O 5650.2B, dated 12-31-1991.

  2. Explosives Classifications Tracking System User Manual

    SciTech Connect (OSTI)

    Genoni, R.P.

    1993-10-01T23:59:59.000Z

    The Explosives Classification Tracking System (ECTS) presents information and data for U.S. Department of Energy (DOE) explosives classifications of interest to EM-561, Transportation Management Division, other DOE facilities, and contractors. It is intended to be useful to the scientist, engineer, and transportation professional, who needs to classify or transport explosives. This release of the ECTS reflects upgrading of the software which provides the user with an environment that makes comprehensive retrieval of explosives related information quick and easy. Quarterly updates will be provided to the ECTS throughout its development in FY 1993 and thereafter. The ECTS is a stand alone, single user system that contains unclassified, publicly available information, and administrative information (contractor names, product descriptions, transmittal dates, EX-Numbers, etc.) information from many sources for non-decisional engineering and shipping activities. The data is the most up-to-date and accurate available to the knowledge of the system developer. The system is designed to permit easy revision and updating as new information and data become available. These, additions and corrections are welcomed by the developer. This user manual is intended to help the user install, understand, and operate the system so that the desired information may be readily obtained, reviewed, and reported.

  3. North American Industry Classification System (NAICS) Search Tool

    Broader source: Energy.gov [DOE]

    The North American Industry Classification System (NAICS) is the standard used by Federal statistical agencies in classifying business establishments for the purpose of collecting, analyzing, and...

  4. Manual of analytical methods for the Industrial Hygiene Chemistry Laboratory

    SciTech Connect (OSTI)

    Greulich, K.A.; Gray, C.E. (comp.)

    1991-08-01T23:59:59.000Z

    This Manual is compiled from techniques used in the Industrial Hygiene Chemistry Laboratory of Sandia National Laboratories in Albuquerque, New Mexico. The procedures are similar to those used in other laboratories devoted to industrial hygiene practices. Some of the methods are standard; some, modified to suit our needs; and still others, developed at Sandia. The authors have attempted to present all methods in a simple and concise manner but in sufficient detail to make them readily usable. It is not to be inferred that these methods are universal for any type of sample, but they have been found very reliable for the types of samples mentioned.

  5. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Evaluations HSS Office of Health, Safety and Security Isotek Isotek Systems, LLC JIC Joint Information Center LED Laboratory Emergency Director LEM Local Emergency Manual LERC...

  6. Manual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    contents Independent Oversight AHA Activity Hazard Analysis AIHA American Industrial Hygiene Association ATD Pantex Applied Technology Division B&W Pantex Babcock and Wilcox...

  7. Manual

    Broader source: Energy.gov (indexed) [DOE]

    team consisted of security and fire officers, radiation safety and industrial hygiene representatives, and a Pantex Site Office (PXSO) representative. The EOC is staffed...

  8. Manual

    Broader source: Energy.gov (indexed) [DOE]

    chemical and radioactive waste in a sturdy form of glass to isolate it from the environment. The WTP will be an industrial complex of facilities for separating and vitrifying...

  9. Industrial Steam Power Cycles Final End-Use Classification

    E-Print Network [OSTI]

    Waterland, A. F.

    1983-01-01T23:59:59.000Z

    Final end uses of steam include two major classifications: those uses that condense the steam against heat transfer surfaces to provide heat to an item of process or service equipment; and those that require a mass flow of steam for stripping...

  10. User's Manual for BEST-Dairy: Benchmarking and Energy/water-Saving Tool (BEST) for the Dairy Processing Industry (Version 1.2)

    SciTech Connect (OSTI)

    Xu, T.; Ke, J.; Sathaye, J.

    2011-04-20T23:59:59.000Z

    This User's Manual summarizes the background information of the Benchmarking and Energy/water-Saving Tool (BEST) for the Dairy Processing Industry (Version 1.2, 2011), including'Read Me' portion of the tool, the sections of Introduction, and Instructions for the BEST-Dairy tool that is developed and distributed by Lawrence Berkeley National Laboratory (LBNL).

  11. Assessments A Training Manual

    E-Print Network [OSTI]

    Modern Industrial Assessments A Training Manual Version 2.0 Sponsored by: Produced by: Dr. Michael. Modern Industrial Assessments: A Training Manual, grew from the desires of the United States Department conservation and waste minimization / pollution prevention training courses and information agencies sponsored

  12. User's manual for the INDCEPT code for estimating industrial steam boiler plant capital investment costs

    SciTech Connect (OSTI)

    Bowers, H I; Fuller, L C; Hudson, II, C R

    1982-09-01T23:59:59.000Z

    The INDCEPT computer code package was developed to provide conceptual capital investment cost estimates for single- and multiple-unit industrial steam boiler plants. Cost estimates can be made as a function of boiler type, size, location, and date of initial operation. The output includes a detailed breakdown of the estimate into direct and indirect costs. Boiler plant cost models are provided to reflect various types and sources of coal and alternate means of sulfur and particulate removal. Cost models are also included for low-Btu and medium-Btu gas produced in coal gasification plants.

  13. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    SHIP - Solar heat for industrial processes. Internationalsolar power could be used to provide process heat for

  14. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    oil, starch and corn refining, since these can be a source of fuel products. The sugar cane industry

  15. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

  16. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    iron and steel production. IEA Greenhouse Gas R&D Programme,tempera- ture range. IEA/Caddet, Sittard, The Netherlands.industry. Cheltenham, UK, IEA Greenhouse Gas R&D Programme,

  17. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    process residual like bagasse are now available (Cornland etsugar in- dustry uses bagasse and the edible oils industrySection 7.4.7. ). The use of bagasse for energy is likely to

  18. Biosafety Manual

    SciTech Connect (OSTI)

    King, Bruce W.

    2010-05-18T23:59:59.000Z

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  19. Updating the Classification of Geothermal Resources- Presentation

    Broader source: Energy.gov [DOE]

    USGS is working with DOE, the geothermal industry, and academic partners to develop a new geothermal resource classification system.

  20. Updating the Classification of Geothermal Resources

    Broader source: Energy.gov [DOE]

    USGS is working with DOE, the geothermal industry, and academic partners to develop a new geothermal resource classification system.

  1. Industry

    SciTech Connect (OSTI)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01T23:59:59.000Z

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  2. Medical Management Treatment Manual

    E-Print Network [OSTI]

    Bezrukov, Sergey M.

    Medical Management Treatment Manual: A Clinical Guide for Researchers and Clinicians) This manual is an adaptation of: Medical Management Treatment Manual: A Clinical Research Guide for Medically, Maryland #12;Message to the Users of this Medical Management (MM) Manual from the Editors Background

  3. Nuclear Explosive Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-04-14T23:59:59.000Z

    This Manual provides supplemental details to support the requirements of DOE O 452.2D, Nuclear Explosive Safety.

  4. Directives System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-01-30T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 251.1A, Directives System, dated 1-30-98.

  5. DOE explosives safety manual

    SciTech Connect (OSTI)

    Not Available

    1991-10-01T23:59:59.000Z

    The Department of Energy (DOE) policy requires that all DOE activities be conducted in a manner that protects the safety of the public and provides a safe and healthful workplace for employees. DOE has also prescribed that all personnel be protected in any explosives operation undertaken. The level of safety provided shall be at least equivalent to that of the best industrial practice. The risk of death or serious injury shall be limited to the lowest practicable minimum. DOE and contractors shall continually review their explosives operations with the aim of achieving further refinements and improvements in safety practices and protective features. This manual describes the Department's explosive safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. It is intended to reflect the state-of-the-art in explosives safety. In addition, it is essential that applicable criteria and requirements for implementing this policy be readily available and known to those responsible for conducting DOE programs.

  6. EMSL Operations Manual

    SciTech Connect (OSTI)

    Foster, Nancy S.

    2009-03-25T23:59:59.000Z

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  7. EMSL Operations Manual

    SciTech Connect (OSTI)

    Foster, Nancy S.

    2009-06-18T23:59:59.000Z

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  8. October 2014 Implementation Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    activities described in this Manual Primary Residential Heating System A heating system that serves 50% or more of the conditioned living area of a residence PTCS(tm)...

  9. Radiological Control Manual

    SciTech Connect (OSTI)

    Not Available

    1993-04-01T23:59:59.000Z

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  10. Directives System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-10-16T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 251.1, which establishes requirements for the development, coordination, and sunset review of DOE directives.

  11. ISSUES MANAGEMENT PROGRAM MANUAL

    E-Print Network [OSTI]

    Gravois, Melanie

    2007-01-01T23:59:59.000Z

    LBNL/PUB-5519 (1), Rev. 032 ISSUES MANAGEMENT PROGRAM MANUAL LBNL/PUB-5519 (1), Rev.Berkeley National Laboratory LBNL/PUB-5519 (1), Rev. 0

  12. EMS Programs Manual

    Broader source: Energy.gov [DOE]

    The Environmental Management System Programs Manual (LMS/POL/S04388-3.0) is obsolete and has been removed from the LM website.

  13. Mail Services User's Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-07-12T23:59:59.000Z

    This Manual provides detailed information on using the Department of Energy (DOE) mail services. Canceled by DOE G 573.1-1.

  14. DOE Explosives Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-03-29T23:59:59.000Z

    This Manual describes DOE's explosives safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives.

  15. Fraction Collector User Manual

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Fraction Collector Frac-950 18-1139-56 User Manual #12;#12;Important user information All users Territories Hong Kong © Copyright Amersham Biosciences AB 2002 - All rights reserved Fraction Collector Frac Fraction Collector Frac-950 User Manual 18-1139-56 Edition AE v Contents 1 Introduction 1.1 General

  16. Process Manual Biological & Agricultural

    E-Print Network [OSTI]

    Boas, Harold P.

    · · · · ·t t ·t ·t t t ·t . ~ t · · Process· Manual Biological & Agricultural Engineering MANUAL FOR THE BIOLOGICAL AND AGRICULTURAL ENGINEERING DEPARTMENT TexasA&MUniversity Article I. NAME The name ofthis organization shall be the Biological and Agricultural Engineering Department (abbreviated

  17. Federal Employee Training Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-10-11T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 360.1B, FEDERAL EMPLOYEE TRAINING. The information in this Manual is intended to assist in improving Federal workforce performance under Department of Energy (DOE) managed Federal employee training. Cancels DOE M 360.1A-1. Canceled by DOE O 360.1C.

  18. Federal Employee Training Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-09-21T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 360.1A, Federal Employee Training, dated 9-21-99. The information in this Manual is intended to assist in improving Federal workforce performance under Department of Energy (DOE) managed Federal employee training. Canceled by DOE M 360.1-1B.

  19. Rensselaer Academic Advising Manual

    E-Print Network [OSTI]

    Bystroff, Chris

    information specific to Rensselaer with reprints of articles relevant to academic advising. Please noteRensselaer Academic Advising Manual For copies, corrections, or suggestions, contact: The Advising & Learning Assistance Center Sage Lab 2106 (518) 276-6269 #12;Rensselaer Academic Advising Manual #12

  20. Rensselaer Academic Advising Manual

    E-Print Network [OSTI]

    Bystroff, Chris

    with reprints of articles relevant to academic advising. Please note that Additional materials mayRensselaer Academic Advising Manual For copies, corrections, or suggestions, contact: The Advising & Learning Assistance Center Sage Lab 2106 (518) 276-6269 #12;Rensselaer Academic Advising Manual 6

  1. Personnel Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-05-22T23:59:59.000Z

    This Manual provides detailed requirements and procedures to supplement DOE O 472.1B, Personnel Security Activities, which establishes the overall objectives, requirements, and responsibilities for implementation and operation of the Personnel Security Program and the Personnel Security Assurance Program in the Department of Energy (DOE). This Manual addresses only the Personnel Security Program.

  2. Salinas : theory manual.

    SciTech Connect (OSTI)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2004-08-01T23:59:59.000Z

    This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programer-notes manual, the user's notes and of course the material in the open literature.

  3. Fire Protection Program Manual

    SciTech Connect (OSTI)

    Sharry, J A

    2012-05-18T23:59:59.000Z

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  4. Human Resources Procedures Manual 16 January 2014 Note these procedures are subject to ongoing review. If you find a procedure which requires updating please notify a member

    E-Print Network [OSTI]

    Liley, David

    Page 1 Human Resources Procedures Manual 16 January 2014 Note these procedures are subject team. Human Resources Procedures Manual Contents Section One: Recruitment and Appointment - Recruitment Management - Public Holidays - Industrial Action - Absence on official business - Academic staff additional

  5. Budget Execution Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30T23:59:59.000Z

    The manual provides the user with a single source for references, definitions, and detailed procedures for distributing and controlling Department funds.Canceled by DOE M 135.1-1A. Does not cancel other directives.

  6. Nuclear Material Packaging Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-03-07T23:59:59.000Z

    The manual provides detailed packaging requirements for protecting workers from exposure to nuclear materials stored outside of an approved engineered contamination barrier. No cancellation. Certified 11-18-10.

  7. Aerosol Sampler Operations Manual

    E-Print Network [OSTI]

    Fischer, Emily V.

    -1123 Laboratory FAX (916) 752-4107 Standard Operating Procedures Technical Information Document TI 201A #12;TI 201.................................................................................................................................................. 3 1.0 Weekly Maintenance ProceduresIMPROVE Aerosol Sampler Operations Manual February 10, 1997 Air Quality Group Crocker Nuclear

  8. Environmental audit manual

    SciTech Connect (OSTI)

    Not Available

    1990-01-01T23:59:59.000Z

    The primary purpose of this manual is to provide a guide upon which an environmental regulatory compliance audit, assessment, or appraisal of a DOE facility can be conducted, and to ensure that all aspects of a particular regulatory area are adequately and consistently covered. In addition, this audit manual provides lines of inquiry to assess a facility's adherence to environmental best management practices (BMPs). The protocols are in a format such that the results and observations of an audit can be documented and recorded. The ultimate objectives of the use of this manual are to document a facility's compliance with environmental laws and regulations, identify areas of potential noncompliance, and plan for corrective action. Although this manual has been developed by a DOE Headquarters entity, it has been designed for use at all levels within DOE.

  9. Geochemical engineering reference manual

    SciTech Connect (OSTI)

    Owen, L.B.; Michels, D.E.

    1984-01-01T23:59:59.000Z

    The following topics are included in this manual: physical and chemical properties of geothermal brine and steam, scale and solids control, processing spent brine for reinjection, control of noncondensable gas emissions, and goethermal mineral recovery. (MHR)

  10. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23T23:59:59.000Z

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Does not cancel other directives.

  11. User' Software Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction...

  12. lthough proportional-integral-derivative (PID) controllers are widely used in the process indus-try, their effectiveness is often limited due to poor tuning. The manual tuning of PID controllers,

    E-Print Network [OSTI]

    Krstic, Miroslav

    A lthough proportional-integral-derivative (PID) controllers are widely used in the process indus- try, their effectiveness is often limited due to poor tuning. The manual tuning of PID controllers, and it is not desirable to open the process loop for system identifica- tion. Thus, a method for tuning PID parameters

  13. United States Industrial Electric Motor Systems Market Opportunities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Industry MotorMaster+ User Manual New Motor Systems Market Assessment AMO and LBNL are currently developing an update to the original Motor Systems Market Assessment. The...

  14. HIV classification using coalescent theory

    SciTech Connect (OSTI)

    Zhang, Ming [Los Alamos National Laboratory; Letiner, Thomas K [Los Alamos National Laboratory; Korber, Bette T [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    Algorithms for subtype classification and breakpoint detection of HIV-I sequences are based on a classification system of HIV-l. Hence, their quality highly depend on this system. Due to the history of creation of the current HIV-I nomenclature, the current one contains inconsistencies like: The phylogenetic distance between the subtype B and D is remarkably small compared with other pairs of subtypes. In fact, it is more like the distance of a pair of subsubtypes Robertson et al. (2000); Subtypes E and I do not exist any more since they were discovered to be composed of recombinants Robertson et al. (2000); It is currently discussed whether -- instead of CRF02 being a recombinant of subtype A and G -- subtype G should be designated as a circulating recombination form (CRF) nd CRF02 as a subtype Abecasis et al. (2007); There are 8 complete and over 400 partial HIV genomes in the LANL-database which belong neither to a subtype nor to a CRF (denoted by U). Moreover, the current classification system is somehow arbitrary like all complex classification systems that were created manually. To this end, it is desirable to deduce the classification system of HIV systematically by an algorithm. Of course, this problem is not restricted to HIV, but applies to all fast mutating and recombining viruses. Our work addresses the simpler subproblem to score classifications of given input sequences of some virus species (classification denotes a partition of the input sequences in several subtypes and CRFs). To this end, we reconstruct ancestral recombination graphs (ARG) of the input sequences under restrictions determined by the given classification. These restritions are imposed in order to ensure that the reconstructed ARGs do not contradict the classification under consideration. Then, we find the ARG with maximal probability by means of Markov Chain Monte Carlo methods. The probability of the most probable ARG is interpreted as a score for the classification. To our knowledge, this particular problem was not addressed up to now. The software package Lamarc Kuhner et al. (2000) allows for sampling ARGs, but it assumes that recombination events only involve one breakpoint. However, in HIV recombinants usually have more than one breakpoint. Moreover, Lamarc does not perform an explicit breakpoint detection, but tries to find them by chance. Although this approach is suitable for most situations, it will not lead to satisfying results in case of highly recombining viruses with multiple breakpoints.

  15. Nuclear material operations manual

    SciTech Connect (OSTI)

    Tyler, R.P.

    1981-02-01T23:59:59.000Z

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

  16. EML procedures manual

    SciTech Connect (OSTI)

    Volchok, H.L.; de Planque, G. (eds.)

    1982-01-01T23:59:59.000Z

    This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications.

  17. Salinas : theory manual.

    SciTech Connect (OSTI)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2011-11-01T23:59:59.000Z

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  18. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. The purpose of the Manual is to catalog those procedural requirements and existing practices that ensure that all DOE elements and contractors continue to manage DOE's radioactive waste in a manner that is protective of worker and public health and safety, and the environment. Does not cancel other directives.

  19. Glycoprotein Enrichment Resin User Manual

    E-Print Network [OSTI]

    Lebendiker, Mario

    Glycoprotein Enrichment Resin User Manual Cat. No. 635647 PT4050-1 (PR912675) Published 14 January Laboratories, Inc. Version No. PR912675 ATakara Bio Company 2 Glycoprotein Enrichment Resin User Manual I.................................................................................................4 IV. Glycoprotein Enrichment

  20. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12T23:59:59.000Z

    The Manual establishes the minimum implementation standards for cyber security management processes throughout the Department. No cancellation.

  1. Information Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-10-12T23:59:59.000Z

    The Manual establishes security requirements for the protection and control of matter required to be classified or controlled by statutes, regulations, or U.S. Department of Energy (DOE) directives. Original dated dated 1-16-09. Canceled by DOE O 471.6--except for Section D.

  2. Information Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-16T23:59:59.000Z

    This Manual establishes security requirements for the protection and control of matter required to be classified or controlled by statutes, regulations, or U.S. Department of Energy directives. Cancels DOE M 470.4-4 Chg 1. DOE M 470.4-4A Chg 1 issued 10-12-10.

  3. Nuclear Explosive Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-04-14T23:59:59.000Z

    This Department of Energy (DOE) Manual provides supplemental details on selected topics to support the requirements of DOE O 452.2D, Nuclear Explosive Safety, dated 4/14/09. Cancels DOE M 452.2-1. Admin Chg 1, dated 7-10-13, cancels DOE M 452.2-1A.

  4. Bioengineering Internship Manual

    E-Print Network [OSTI]

    Collins, Gary S.

    Bioengineering Internship Manual Washington State University Bioengineering Internship Program-335-4332 #12;General Description: An internship is a self-initiated, supervised work experience in related fields. The purpose of an internship is to enhance a student's professional preparation through

  5. CONCRETE PAVEMENT Reference Manual

    E-Print Network [OSTI]

    CONCRETE PAVEMENT Reference Manual Prepared for Federal Highway Administration Office of Pavement by National Concrete Pavement Technology Center at Iowa State University 2711 South Loop Drive, Suite 4700 No. 3. Recipient's Catalog No. 4. Title and Subtitle 5. Report Date February 2008 Concrete Pavement

  6. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05T23:59:59.000Z

    The Federal Technical Capability Manual provides the process for the recruitment, deployment, development, and retention of Federal personnel with the demonstrated technical capability to safely accomplish the Departments missions and responsibilities at defense nuclear facilities. Canceled by DOE M 426.1-1A. Does not cancel other directives.

  7. DOE Explosives Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-01-09T23:59:59.000Z

    The Manual describes the Departments explosive safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. Cancels DOE M 440.1-1. Canceled by DOE O 440.1B Chg 1.

  8. ACADEMIC PROGRAM PROCEDURE MANUAL

    E-Print Network [OSTI]

    Fay, Noah

    1 ACADEMIC PROGRAM REVIEW PROCEDURE MANUAL 2014-2015 Office of the Senior Vice President Tucson, AZ 85721 #12;2 ACADEMIC PROGRAM REVIEW MANAGEMENT TEAM Web Site for Academic Program Review http Educational Policy Studies & Practice Spanish and Portuguese Electrical & Computer Engineering Teaching

  9. The Gambit Scheme manual.

    E-Print Network [OSTI]

    2008-01-22T23:59:59.000Z

    Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and .... are best placed in the initialization file, which is a file containing Scheme code. ...... ("hello"). 15.2 Exception objects related to memory management ...... ming practice to use a name with the same case as in C.

  10. SERVICE MANUAL AUTORANGING

    E-Print Network [OSTI]

    Kleinfeld, David

    SERVICE MANUAL AUTORANGING DC POWER SUPPLY AGILENT MODELS 6010A, 6011A, 6012B and 6015A Agilent pay for return of products to Customer. Warranty services outside the country of initial purchase, the Customer shall be entitled to a refund of the purchase price upon return of the product to Agilent

  11. HASL procedures manual

    SciTech Connect (OSTI)

    Not Available

    1980-08-01T23:59:59.000Z

    Addition and corrections to the following sections of the HASL Procedures Manual are provided: Table of Contents; Bibliography; Fallout Collection Methods; Wet/Dry Fallout Collection; Fluoride in Soil and Sediment; Strontium-90; Natural Series; Alpha Emitters; and Gamma Emitters. (LK)

  12. National Security System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-03-08T23:59:59.000Z

    The manual provides baseline requirements and controls for the graded protection of the confidentiality, integrity, and availability of classified information and information systems used or operated by the Department of Energy (DOE), contractors, and any other organization on behalf of DOE, including the National Nuclear Security Administration. Cancels DOE M 471.2-2. Canceled by DOE O 205.1B.

  13. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23T23:59:59.000Z

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Admin Chg 1 dated 9-1-09. Canceled by DOE O 205.1B.

  14. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23T23:59:59.000Z

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B

  15. Radiological Emergency Response Health and Safety Manual

    SciTech Connect (OSTI)

    D. R. Bowman

    2001-05-01T23:59:59.000Z

    This manual was created to provide health and safety (H&S) guidance for emergency response operations. The manual is organized in sections that define each aspect of H and S Management for emergency responses. The sections are as follows: Responsibilities; Health Physics; Industrial Hygiene; Safety; Environmental Compliance; Medical; and Record Maintenance. Each section gives guidance on the types of training expected for managers and responders, safety processes and procedures to be followed when performing work, and what is expected of managers and participants. Also included are generic forms that will be used to facilitate or document activities during an emergency response. These ensure consistency in creating useful real-time and archival records and help to prevent the loss or omission of information.

  16. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07.

  17. Personnel Security Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-07-12T23:59:59.000Z

    This Manual provides detailed requirements and procedures to supplement DOE O 472.1B, Personnel Security Activities, which establishes the overall objectives, requirements, and responsibilities for implementation and operation of the Personnel Security Program and the Personnel Security Assurance Program in the Department of Energy (DOE), including the National Nuclear Security Administration (NNSA). Extended until 7-7-06 by DOE N 251.64, dated 7-7-05 Cancels: DOE M 472.1-1A.

  18. OASIS User Manual

    E-Print Network [OSTI]

    Bojtar, L

    2009-01-01T23:59:59.000Z

    The OASIS system has been operational for years now. After a long development the project has reached a state where the number of features it provides exceeds largely what most of its users knows about. The author felt it was time to write a user manual explaining all the functionality of the viewer application. This document is a user manual, concentrating on the functionality of the viewer from the user’s point of view. There are already documents available on the project’s web site about the technical aspects at http://project-oasis.web.cern.ch/project-oasis/presentations.htm . There was an attempt to produce a tutorial on the viewer, but it didn’t get much further than the table of contents, that however is well thought. The structure of this user manual follows the same principle, the basic and most often used features are grouped together. Advanced or less often used features are described in a separate chapter. There is a second organizational principle, features belong to different levels: chann...

  19. Revision of DOE Manual 460.2-1

    Broader source: Energy.gov (indexed) [DOE]

    Practices Manual DOE Writing Team March 2006 TECWG 2 Proposed Revision Timeline Proposed Revision Timeline Complete new draft of Manual 206 Draft Manual provided to Manual Review...

  20. Morphological Image Analysis and Its Application to Sunspot Classification

    E-Print Network [OSTI]

    van Dyk, David

    magnetic polarity. The classification and tracking of sunspots is an active undertaking of solar both of their future evo- lution and of explosive associated events higher in the solar atmosphere, such as solar flares and coronal mass ejections. To aid in this prediction, sunspot groups are manually

  1. Knowledge Transformation for Cross-Domain Sentiment Classification

    E-Print Network [OSTI]

    Li, Tao

    Knowledge Transformation for Cross-Domain Sentiment Classification Tao Li School of Computer With the explosion of user-generated web2.0 content in the form of blogs, wikis and discussion forums, the Internet domain, thereby build- ing high-quality sentiment models without manual effort? We outline a novel

  2. Radiological control manual. Revision 1

    SciTech Connect (OSTI)

    Kloepping, R.

    1996-05-01T23:59:59.000Z

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  3. RDS operations manualField implementation

    E-Print Network [OSTI]

    Mullins, Dyche

    for trainings and TA. #12;RDS operations manual IBBS Toolbox 227 Women's Health Monitoring Survey fieldRDS operations manualField implementation #12;RDS operations manual 226 IBBS Toolbox RDS operations manual The RDS operations manual is designed to guide project staff during the implementation of RDS

  4. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12T23:59:59.000Z

    The Manual establishes the minimum implementation standards for cyber security management processes throughout the Department. No cancellation. Admin Chg 1 dated 9-1-09.

  5. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07. Admin Chg 2, dated 6-8-11, cancels DOE M 435.1-1 Chg 1.

  6. RADTRAN 6 technical manual.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01T23:59:59.000Z

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  7. TALENT user's manual.

    SciTech Connect (OSTI)

    Merchant, Bion John

    2012-01-01T23:59:59.000Z

    The Ground-Based Monitoring R and E Component Evaluation project performs testing on the hardware components that make up Seismic and Infrasound monitoring systems. The majority of the testing is focused on the Digital Waveform Recorder (DWR), Seismic Sensor, and Infrasound Sensor. The software tool used to capture and analyze the data collected from testing is called TALENT: Test and Analysis Evaluation Tool. This document is the manual for using TALENT. Other reports document the testing procedures that are in place (Kromer, 2007) and the algorithms employed in the test analysis (Merchant, 2011).

  8. DEPARTMENT OF ENERGY MANUAL

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,Office of Policy, OAPM | Department ofCommunications3DepartmentENERGY MANUAL

  9. Safety and Health Policy and Procedure Manual Biological Safety Manual

    E-Print Network [OSTI]

    Saidak, Filip

    Biological Safety Association (ABSA) best practices as well as all federal, state, and local regulations. IISafety and Health Policy and Procedure Manual Biological Safety Manual Section 280 INDEX I. Policy space suitable for work being conducted · Under the Office of Research Compliance, establish and manage

  10. Academic Apprentice Personnel Manual 1 Academic Apprentice

    E-Print Network [OSTI]

    Jalali. Bahram

    Academic Apprentice Personnel Manual 1 Academic Apprentice Personnel Manual For Departments Updated December 2013 #12;2 Academic Apprentice Personnel Manual Contents Glossary of Terms and Acronyms .............3 What are Academic Apprentice Personnel

  11. Automated manual transmission controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (Whitmore Lake, MI); Reed, Jr., Richard G. (Royal Oak, MI); Bernier, David R. (Rochester Hills, MI)

    1999-12-28T23:59:59.000Z

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  12. MELCOR computer code manuals

    SciTech Connect (OSTI)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

    1995-03-01T23:59:59.000Z

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  13. POET with C++ Reference Manual

    E-Print Network [OSTI]

    Buhr, Peter Allan

    POET with #22;C++ Reference Manual University of Waterloo David Taylor and Peter A. Buhr c #3; 1996 July 23, 2006 #3; Permission is granted to make copies for personal or educational use #12; 2 POET Reference Manual Contents 1 Introduction 3 2 Before Starting POET 3 3 Accessing POET 3 4 User Interface 3 5

  14. ENERGY MANAGEMENT OPERATIONAL PROCEDURE MANUAL

    E-Print Network [OSTI]

    Harman, Neal.A.

    ENERGY MANAGEMENT OPERATIONAL PROCEDURE MANUAL Swansea University Estates Services Singleton Park Swansea SA2 8PP Tel 01792 295819 Fax 01792 295820 #12;Swansea University Energy Management Operational ......................................................................................11 #12;Swansea University Energy Management Operational Procedural Manual Estates Services April 2008

  15. Im2Learn Manual The motivation for developing Im2Learn (Image to Learn) comes from academic, government

    E-Print Network [OSTI]

    Minsker, Barbara S.

    cover classification, map analysis, geo-spatial information systems (GIS), synthetic aperture radar (SAR, automobile industry, database retrieval, surveillance, and digital library. Band Selection Unsupervised de-noising and de-blurring in microarray data. Classification: Two and N-class classification

  16. THERM 5 / WINDOW 5 NFRC simulation manual

    SciTech Connect (OSTI)

    Mitchell, Robin; Kohler, Christian; Arasteh, Dariush; Carmody, John; Huizenga, Charlie; Curcija, Dragan

    2003-06-01T23:59:59.000Z

    This document, the ''THERM 5/WINDOW 5 NFRC Simulation Manual', discusses how to use the THERM and WINDOW programs to model products for NFRC certified simulations and assumes that the user is already familiar with those programs. In order to learn how to use these programs, it is necessary to become familiar with the material in both the ''THERM User's Manual'' and the ''WINDOW User's Manual''. In general, this manual references the User's Manuals rather than repeating the information. If there is a conflict between either of the User Manual and this ''THERM 5/''WINDOW 5 NFRC Simulation Manual'', the ''THERM 5/WINDOW 5 NFRC Simulation Manual'' takes precedence. In addition, if this manual is in conflict with any NFRC standards, the standards take precedence. For example, if samples in this manual do not follow the current taping and testing NFRC standards, the standards not the samples in this manual, take precedence.

  17. OSH technical reference manual

    SciTech Connect (OSTI)

    Not Available

    1993-11-01T23:59:59.000Z

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  18. FRMAC Operations Manual

    SciTech Connect (OSTI)

    Frandsen, K.

    2010-05-01T23:59:59.000Z

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  19. Transmission line: design manual

    SciTech Connect (OSTI)

    Farr, H.H.

    1980-01-01T23:59:59.000Z

    The purpose of this manual is to outline the various requirements for, and the procedures to be followed in the design of power transmission lines by the Bureau of Reclamation, US Department of the Interior. Numerous design studies, which have been made on specific aspects of transmission line design, are included with explanations of their applications. Information is presented concerning such aspects as selection of type of construction, conductor sags and tensions, insulation, lightning protection, clearance patterns, galloping conductors, structure limitation and guying charts, and structure spotting. Structure design examples are limited to wood-pole construction. Interpretations of the National Electrical Safety Code and other codes are made as required. Some of the example problems were developed when the sixth edition of NESC was current, and are so noted; however, most examples use the 1977 edition of NESC.

  20. Classification of Two-Phase Flow Patterns by Ultrasonic Sensing

    E-Print Network [OSTI]

    Ray, Asok

    (e.g., petrochemical processes and nuclear power plants). This concept of flow pattern classification are critical for design, analysis, and operation in a variety of industries such as petrochemical processes

  1. Integrated Safety Management System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-11-01T23:59:59.000Z

    This manual provides requirements and guidance for DOE and contractors to ensure development and implementation of an effective Integrated Safety Management system that is periodically reviewed and continuously improved. Canceled by DOE O 450.2.

  2. Manual for Identifying Classified Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-08-28T23:59:59.000Z

    The Manual provides detailed requirements to supplement DOE O 475.2, Identifying Classified Information, dated 8/28/07. Cancels DOE M 475.1-1A; canceled by DOE O 475.2A

  3. Surface Environmental Surveillance Procedures Manual

    SciTech Connect (OSTI)

    Hanf, RW; Dirkes, RL

    1990-02-01T23:59:59.000Z

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  4. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12T23:59:59.000Z

    The Manual establishes minimum implementation standards for cyber security management processes throughout the Department. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B. No cancellations.

  5. State Energy Program Operations Manual

    SciTech Connect (OSTI)

    Office of Building Technology, State and Community Programs

    1999-03-17T23:59:59.000Z

    The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

  6. JSATS Decoder Software Manual

    SciTech Connect (OSTI)

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01T23:59:59.000Z

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ‘real-time’ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  7. COSY INFINITY reference manual

    SciTech Connect (OSTI)

    Berz, M.

    1990-07-01T23:59:59.000Z

    This is a reference manual for the arbitrary order particle optics and beam dynamics code COSY INFINITY. It is current as of June 28, 1990. COSY INFINITY is a code to study and design particle optical systems, including beamlines, spectrometers, and particle accelerators. At its core it is using differential algebraic (DA) methods, which allow a very systematic and simple calculation of high order effects. At the same time, it allows the computation of dependences on system parameters, which is often interesting in its own right and can also be used for fitting. COSY INFINITY has a full structured object oriented language environment. This provides a simple interface for the casual user. At the same time, it offers the demanding user a very flexible and powerful tool for the study and design of systems, and more generally, the utilization of DA methods. The power and generality of the environment is perhaps best demonstrated by the fact that the physics routines of COSY INFINITY are written in its own input language and are very compact. The approach also considerably facilitates the implementation of new features because they are incorporated with the same commands that are used for design and study. 26 refs.

  8. Manual transmission shift linkage

    SciTech Connect (OSTI)

    Sewell, J.S.

    1991-10-01T23:59:59.000Z

    This patent describes a sliding gear manual transmission (10) for an automotive vehicle including a transmission housing (11), an input shaft (12) journalled in the housing, an output shaft (13) axially aligned with the input shaft and journalled in the housing, a countershaft (15) journalled in the housing and carrying a cluster gear (17) thereon, the input shaft (12) terminating in an input gear (14), a plurality of gears (26,27,28,29,31,31) on the output shaft (13) in meshing engagement with the cluster gear (17), and a plurality of synchronizing clutches (36,38,41,42) on the output shaft and countershaft for engagement of gear ratios of the meshing gears, and an axially movable and rotatable shift rail (81) located in the housing and operatively connected to a shift lever (82) actuated by the vehicle operator, the improvement comprising an auxiliary shift rail (98) located in the housing (11) generally paralleling the first mentioned shift rail (81) to provide for actuation of fifth, sixth and reverse gears the auxiliary shift rail (98) having a 5-6 shift arm (104) journalled thereon for axial movement relative thereto, and a reverse shift arm (99) rotatably mounted thereon for axial movement therewith.

  9. Workload State Classification With Automation During Simulated

    E-Print Network [OSTI]

    Kaber, David B.

    Workload State Classification With Automation During Simulated Air Traffic Control David B. Kaber and Carlene M. Perry Edward P. Fitts Department of Industrial and Systems Engineering, North Carolina State to dynamically apply automation to information pro- cessing functions in aviation systems. This research examined

  10. Pollutant Assessments Group Procedures Manual: Volume 1, Administrative and support procedures

    SciTech Connect (OSTI)

    Not Available

    1992-03-01T23:59:59.000Z

    This manual describes procedures currently in use by the Pollutant Assessments Group. The manual is divided into two volumes: Volume 1 includes administrative and support procedures, and Volume 2 includes technical procedures. These procedures are revised in an ongoing process to incorporate new developments in hazardous waste assessment technology and changes in administrative policy. Format inconsistencies will be corrected in subsequent revisions of individual procedures. The purpose of the Pollutant Assessments Groups Procedures Manual is to provide a standardized set of procedures documenting in an auditable manner the activities performed by the Pollutant Assessments Group (PAG) of the Health and Safety Research Division (HASRD) of the Environmental Measurements and Applications Section (EMAS) at Oak Ridge National Laboratory (ORNL). The Procedures Manual ensures that the organizational, administrative, and technical activities of PAG conform properly to protocol outlined by funding organizations. This manual also ensures that the techniques and procedures used by PAG and other contractor personnel meet the requirements of applicable governmental, scientific, and industrial standards. The Procedures Manual is sufficiently comprehensive for use by PAG and contractor personnel in the planning, performance, and reporting of project activities and measurements. The Procedures Manual provides procedures for conducting field measurements and includes program planning, equipment operation, and quality assurance elements. Successive revisions of this manual will be archived in the PAG Document Control Department to facilitate tracking of the development of specific procedures.

  11. Memorandum, Implementation of Department of Energy Manual 450...

    Energy Savers [EERE]

    Implementation of Department of Energy Manual 450.4-1, Integrated Safety Management System Manual Memorandum, Implementation of Department of Energy Manual 450.4-1, Integrated...

  12. Hydrogen Fuel Cell Engines and Related Technologies Course Manual...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engines and Related Technologies Course Manual Hydrogen Fuel Cell Engines and Related Technologies Course Manual This course manual features technical information on the use of...

  13. Classification Documents and Publications

    Broader source: Energy.gov [DOE]

    Certain documents and publications created or issued by the Office of Classification are available from this page.

  14. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Obeying Environmental Laws Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the...

  15. SOWFA + Super Controller User's Manual

    SciTech Connect (OSTI)

    Fleming, P.; Gebraad, P.; Churchfield, M.; Lee, S.; Johnson, K.; Michalakes, J.; van Wingerden, J. W.; Moriarty, P.

    2013-08-01T23:59:59.000Z

    SOWFA + Super Controller is a modification of the NREL's SOWFA tool which allows for a user to apply multiturbine or centralized wind plant control algorithms within the high-fidelity SOWFA simulation environment. The tool is currently a branch of the main SOWFA program, but will one day will be merged into a single version. This manual introduces the tool and provides examples such that a user can implement their own super controller and set up and run simulations. The manual only discusses enough about SOWFA itself to allow for the customization of controllers and running of simulations, and details of SOWFA itself are reported elsewhere Churchfield and Lee (2013); Churchfield et al. (2012). SOWFA + Super Controller, and this manual, are in alpha mode.

  16. Financial Policy Manual RISK MANAGEMENT POLICIES

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    Financial Policy Manual Page 1 RISK MANAGEMENT POLICIES 2601 Departmental Scope & Responsibility;Financial Policy Manual Page 1 2601 DEPARTMENTAL SCOPE & RESPONSIBILITY Subject: Risk Management & Insurance Effective: December 1986 Revised: May 2011 Last Reviewed: March 2014 Resp. Office: Risk Management

  17. Explosive Safety Manual, to a New Order

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-12-02T23:59:59.000Z

    This memorandum provides justification for the conversion of Department of Energy (DOE) Manual (M) 440.1-1A, DOE Explosives Safety Manual, dated 1-9-06, into a new DOE Order.

  18. Thesis Manual Archives and Special Collections

    E-Print Network [OSTI]

    Shihadeh, Alan

    ................................................................................................................................. 4 F. Indentation MANUAL I. Introduction The following guidelines are offered to help graduate students meet the Library

  19. Learning Community Peer Mentor Supervisor's Manual

    E-Print Network [OSTI]

    Lin, Zhiqun

    Learning Community Peer Mentor Supervisor's Manual #12;Table of Contents Introduction.........................................................................................................................................4 Timeline for Hiring Mentors.......................................................................................................7 Supervision of Mentors

  20. US Department of Energy Radiological Control Manual

    SciTech Connect (OSTI)

    Not Available

    1992-06-01T23:59:59.000Z

    This manual establishes practices for the conduct of radiological control activities. The Manual states DOE`s positions and views on the best courses of action currently available in the area of radiological controls. Accordingly, the provisions in the Manual should be viewed by contractors as an acceptable technique, method or solution for fulfilling their duties and responsibilities. This Manual shall be used by DOE in evaluating the performance of its contractors. (VC)

  1. US Department of Energy Radiological Control Manual

    SciTech Connect (OSTI)

    Not Available

    1992-06-01T23:59:59.000Z

    This manual establishes practices for the conduct of radiological control activities. The Manual states DOE's positions and views on the best courses of action currently available in the area of radiological controls. Accordingly, the provisions in the Manual should be viewed by contractors as an acceptable technique, method or solution for fulfilling their duties and responsibilities. This Manual shall be used by DOE in evaluating the performance of its contractors. (VC)

  2. LASER SAFETY MANUAL 2014 RICE UNIVERSITY 1

    E-Print Network [OSTI]

    Natelson, Douglas

    LASER SAFETY MANUAL 2014 RICE UNIVERSITY 1 Rice University Laser Safety Manual Environmental Health and Safety MS 123 P.O. Box 1892 Houston, TX 77251-1892 January 2014 #12;LASER SAFETY MANUAL 2014 RICE UNIVERSITY 2 Introduction The objective of the Rice University Laser Safety program is to assist all levels

  3. LASER SAFETY MANUAL 2012 RICE UNIVERSITY 1

    E-Print Network [OSTI]

    Natelson, Douglas

    LASER SAFETY MANUAL 2012 RICE UNIVERSITY 1 Rice University Laser Safety Manual Environmental Health and Safety MS 123 P.O. Box 1892 Houston, TX 77251-1892 December 2012 #12;LASER SAFETY MANUAL 2012 RICE, and general procedures to aid those individuals working in the laser laboratory environment. It is intended

  4. DATA MONITORING AND ANALYSIS PROGRAM MANUAL

    E-Print Network [OSTI]

    DATA MONITORING AND ANALYSIS PROGRAM MANUAL LBNL/PUB-5519 (3), Rev. 0 Effective Date: _July 23 Data Monitoring and Analysis Program Manual REVISION HISTORY Revision Date Revision Description #12;LBNL/PUB-5519 (3), Rev. 0 Page 3 of 23 Data Monitoring and Analysis Program Manual TABLE OF CONTENTS

  5. LESSONS LEARNED AND BEST PRACTICES PROGRAM MANUAL

    E-Print Network [OSTI]

    LESSONS LEARNED AND BEST PRACTICES PROGRAM MANUAL LBNL/PUB-5519 (4), Rev. 1 Approved by: _James (4), Rev. 1 Page 2 of 15 Lessons Learned and Best Practices Program Manual RECORD OF REVISION........................................................................................ 15 #12;LBNL/PUB-5519 (4), Rev. 1 Page 4 of 15 Lessons Learned and Best Practices Program Manual 1

  6. USER'S MANUAL Revision 1.0c

    E-Print Network [OSTI]

    van Hemmen, J. Leo

    to correct the interference at your own expense. California Best Management Practices RegulationsH8QM3-2 H8QMi-2 USER'S MANUAL Revision 1.0c SUPER ® #12;Manual Revision 1.0c Release Date: November in the United States of America The information in this User's Manual has been carefully reviewed

  7. SimProjectTM Player's Manual

    E-Print Network [OSTI]

    Rudowsky, Ira

    SimProjectTM Player's Manual i SIMPROJECTTMA Project Management Simulation for Classroom variables that are routinely encountered in project management and decision making. Best and most important Instruction PLAYER'S MANUAL V 1.2 JEFFREY K. PINTO, PH.D. AND DIANE H. PARENTE, PH.D. Player's Manual for use

  8. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08T23:59:59.000Z

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. No cancellations.

  9. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08T23:59:59.000Z

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. No cancellations. Admin Chg 1 dated 9-1-09.

  10. Operation manual Installation Category I

    E-Print Network [OSTI]

    Kleinfeld, David

    Cary 50 Hardware Operation manual Installation Category I Pollution Degree 2 Safety Class 3 (EN-2:1991 IEC 801-3:1984 IEC 801-4:1988 Equipment Model Number Cary 50 Series Responsible Person in the EUUV software 4-13 5 Spare parts 5-1 #12;Cary 50 Publication date: 06/99 vii Safety practices and hazards Your

  11. PNNL Hoisting and Rigging Manual

    SciTech Connect (OSTI)

    Haynie, Todd O.; Fullmer, Michael W.

    2008-12-29T23:59:59.000Z

    This manual describes the safe and cost effective operation, inspection, maintenance, and repair requirements for cranes, hoists, fork trucks, slings, rigging hardware, and hoisting equipment. It is intended to be a user's guide to requirements, codes, laws, regulations, standards, and practices that apply to Pacific Northwest National Laboratory (PNNL) and its subcontractors.

  12. Radioactive Material Transportation Practices Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-06-04T23:59:59.000Z

    This Manual establishes standard transportation practices for the Department of Energy, including National Nuclear Security Administration to use in planning and executing offsite shipments of radioactive materials and waste. The revision reflects ongoing collaboration of DOE and outside organizations on the transportation of radioactive material and waste. Cancels DOE M 460.2-1.

  13. INSTRUCTION MANUAL ISOLATED PULSE STIMULATOR

    E-Print Network [OSTI]

    Kleinfeld, David

    2 Operating Instructions ..6 Theory of Operation 10 Calibration Procedures 12 Inputs 14 Output with: Rack Mount Hardware Instructions & Maintenance Manual NOTE This instrument is not intended cycles. It is set for standard TTL levels. GATE: This BNC connector allows a signal from an external

  14. Quality assurance manual: Volume 1

    SciTech Connect (OSTI)

    Oijala, J.E.

    1988-06-01T23:59:59.000Z

    Stanford Linear Accelerator Center (SLAC) is a DOE-supported research facility that carries out experimental and theoretical research in high energy physics and developmental work in new techniques for particle acceleration and experimental instrumentation. The purpose of this manual is to describe SLAC quality assurance policies and practices in various parts of the Laboratory.

  15. EML Procedures Manual, HASL-300

    SciTech Connect (OSTI)

    Not Available

    1981-09-28T23:59:59.000Z

    Additions and corrections for the EML Procedures Manual, HASL-300, are presented for the following areas: wet/dry collector; ion chamber; field gamma spectrometry; TLD; reactive gas monitoring; cesium; cadmium and lead; carbon dioxide; polynuclear aromatic hydrocarbons; manganese precipitation samples; iron precipitation samples; aluminium precipitation samples; and lead precipitation samples.

  16. TEELINDUSTRIAL OPERATING INSTRUCTIONS & PARTS MANUAL

    E-Print Network [OSTI]

    Kleinfeld, David

    -stage zoning applications in hydronic heating and cooling systems for residential, commercial and/or inTEELINDUSTRIAL SERIES OPERATING INSTRUCTIONS & PARTS MANUAL WATER CIRCULATING PUMPS MODELS 1P899A INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE, OR SERVICE TEEL PUMPS. PROTECT YOURSELF

  17. Information & Records Management Process Manual

    E-Print Network [OSTI]

    Hickman, Mark

    several significant failures to manage information in the public sector in New Zealand, which the Official Information, Privacy, Copyright and Public Records Acts. How you manage UC informationInformation & Records Management Process Manual 2013Information and Records Management #12;Contents

  18. Job Placement Manual Human Resources

    E-Print Network [OSTI]

    Habib, Ayman

    Job Placement Manual Human Resources Fall 2001 for bargaining unit positions as per the Collective;- 1 - University of Calgary Job Family Definitions General The General job family encompasses, production, light construction, or facility maintenance. Positions in this job family often support a service

  19. National Geothermal Resource Assessment and Classification |...

    Office of Environmental Management (EM)

    Resource Assessment and Classification National Geothermal Resource Assessment and Classification National Geothermal Resource Assessment and Classification presentation at the...

  20. Security classification of information

    SciTech Connect (OSTI)

    Quist, A.S.

    1993-04-01T23:59:59.000Z

    This document is the second of a planned four-volume work that comprehensively discusses the security classification of information. The main focus of Volume 2 is on the principles for classification of information. Included herein are descriptions of the two major types of information that governments classify for national security reasons (subjective and objective information), guidance to use when determining whether information under consideration for classification is controlled by the government (a necessary requirement for classification to be effective), information disclosure risks and benefits (the benefits and costs of classification), standards to use when balancing information disclosure risks and benefits, guidance for assigning classification levels (Top Secret, Secret, or Confidential) to classified information, guidance for determining how long information should be classified (classification duration), classification of associations of information, classification of compilations of information, and principles for declassifying and downgrading information. Rules or principles of certain areas of our legal system (e.g., trade secret law) are sometimes mentioned to .provide added support to some of those classification principles.

  1. Standard Subject Classification System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1979-08-14T23:59:59.000Z

    The order establishes the DOE Standard Subject Classification System for classifying documents and records by subject, including correspondence, directives, and forms.Cancels DOE O 0000.1.

  2. Industrial Engineering Industrial Advisory Board

    E-Print Network [OSTI]

    Gelfond, Michael

    Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

  3. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08T23:59:59.000Z

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B.

  4. Pollutant Assessments Group Procedures Manual

    SciTech Connect (OSTI)

    Chavarria, D.E.; Davidson, J.R.; Espegren, M.L.; Kearl, P.M.; Knott, R.R.; Pierce, G.A.; Retolaza, C.D.; Smuin, D.R.; Wilson, M.J.; Witt, D.A. (Oak Ridge National Lab., TN (USA)); Conklin, N.G.; Egidi, P.V.; Ertel, D.B.; Foster, D.S.; Krall, B.J.; Meredith, R.L.; Rice, J.A.; Roemer, E.K. (Oak Ridge Associated Universities, Inc., TN (USA))

    1991-02-01T23:59:59.000Z

    This procedures manual combines the existing procedures for radiological and chemical assessment of hazardous wastes used by the Pollutant Assessments Group at the time of manuscript completion (October 1, 1990). These procedures will be revised in an ongoing process to incorporate new developments in hazardous waste assessment technology and changes in administrative policy and support procedures. Format inconsistencies will be corrected in subsequent revisions of individual procedures.

  5. ISE System Development Methodology Manual

    SciTech Connect (OSTI)

    Hayhoe, G.F.

    1992-02-17T23:59:59.000Z

    The Information Systems Engineering (ISE) System Development Methodology Manual (SDM) is a framework of life cycle management guidelines that provide ISE personnel with direction, organization, consistency, and improved communication when developing and maintaining systems. These guide-lines were designed to allow ISE to build and deliver Total Quality products, and to meet the goals and requirements of the US Department of Energy (DOE), Westinghouse Savannah River Company, and Westinghouse Electric Corporation.

  6. Audit Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataEnergyDepartmentWind Siting Articles aboutDepartment ofManual Audit

  7. Vegetation Change Analysis User's Manual

    SciTech Connect (OSTI)

    D. J. Hansen; W. K. Ostler

    2002-10-01T23:59:59.000Z

    Approximately 70 percent of all U.S. military training lands are located in arid and semi-arid areas. Training activities in such areas frequently adversely affect vegetation, damaging plants and reducing the resilience of vegetation to recover once disturbed. Fugitive dust resulting from a loss of vegetation creates additional problems for human health, increasing accidents due to decreased visibility, and increasing maintenance costs for roads, vehicles, and equipment. Diagnostic techniques are needed to identify thresholds of sustainable military use. A cooperative effort among U.S. Department of Energy, U.S. Department of Defense, and selected university scientists was undertaken to focus on developing new techniques for monitoring and mitigating military impacts in arid lands. This manual focuses on the development of new monitoring techniques that have been implemented at Fort Irwin, California. New mitigation techniques are described in a separate companion manual. This User's Manual is designed to address diagnostic capabilities needed to distinguish between various degrees of sustainable and nonsustainable impacts due to military training and testing and habitat-disturbing activities in desert ecosystems. Techniques described here focus on the use of high-resolution imagery and the application of image-processing techniques developed primarily for medical research. A discussion is provided about the measurement of plant biomass and shrub canopy cover in arid. lands using conventional methods. Both semiquantitative methods and quantitative methods are discussed and reference to current literature is provided. A background about the use of digital imagery to measure vegetation is presented.

  8. TA-55 change control manual

    SciTech Connect (OSTI)

    Blum, T.W.; Selvage, R.D.; Courtney, K.H.

    1997-11-01T23:59:59.000Z

    This manual is the guide for initiating change at the Plutonium Facility, which handles the processing of plutonium as well as research on plutonium metallurgy. It describes the change and work control processes employed at TA-55 to ensure that all proposed changes are properly identified, reviewed, approved, implemented, tested, and documented so that operations are maintained within the approved safety envelope. All Laboratory groups, their contractors, and subcontractors doing work at TA-55 follow requirements set forth herein. This manual applies to all new and modified processes and experiments inside the TA-55 Plutonium Facility; general plant project (GPP) and line item funded construction projects at TA-55; temporary and permanent changes that directly or indirectly affect structures, systems, or components (SSCs) as described in the safety analysis, including Facility Control System (FCS) software; and major modifications to procedures. This manual does not apply to maintenance performed on process equipment or facility SSCs or the replacement of SSCs or equipment with documented approved equivalents.

  9. Hazard classification for the supercritical water oxidation test bed. Revision 1

    SciTech Connect (OSTI)

    Ramos, A.G.

    1994-10-01T23:59:59.000Z

    A hazard classification of ``routinely accepted by the public`` has been determined for the operation of the supercritical water oxidation test bed at the Idaho National Engineering Laboratory. This determination is based on the fact that the design and proposed operation meet or exceed appropriate national standards so that the risks are equivalent to those present in similar activities conducted in private industry. Each of the 17 criteria for hazards ``routinely accepted by the public,`` identified in the EG and G Idaho, Inc., Safety Manual, were analyzed. The supercritical water oxidation (SCWO) test bed will treat simulated mixed waste without the radioactive component. It will be designed to operate with eight test wastes. These test wastes have been chosen to represent a broad cross-section of candidate mixed wastes anticipated for storage or generation by DOE. In particular, the test bed will generate data to evaluate the ability of the technology to treat chlorinated waste and other wastes that have in the past caused severe corrosion and deposition in SCWO reactors.

  10. Incident Prevention, Warning, and Response (IPWAR) Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-09-30T23:59:59.000Z

    This Manual defines a structured, cohesive, and consistent process for performing incident prevention, warning, and response for DOE's Federal information systems and is consistent with the requirements of Federal laws, Executive orders, national security directives, and other regulations. The Manual also provides requirements and implementation instructions for the Department's Incident Prevention, Warning and Response process, and supplements DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03. DOE N 205.17 cancels this manual. This manual cancels DOE N 205.4, Handling Cyber Security Alerts and Advisories and Reporting Cyber Security Incidents, dated 3/18/2002.

  11. Internship and Cooperative Education Manual for Employers

    E-Print Network [OSTI]

    Karonis, Nicholas T.

    Internship and Cooperative Education Manual for Employers #12;2 Division of Student Affairs ................................................................................................... Page 4 Benefits of Internship Programs................................................................................................. Page 5 Characteristics of NIU Internships

  12. RADIATION SAFETY MANUAL POLICIES AND PROCEDURES

    E-Print Network [OSTI]

    Zhang, Yuanlin

    RADIATION SAFETY MANUAL POLICIES AND PROCEDURES FOR RADIATION PROTECTION AT TEXAS TECH UNIVERSITY................................................................................................................I-1 B. Radiation Protection Program...............................................................................I-3 D. Radiation Safety Management

  13. WDTS Application & Review System (WARS) Mentor Manual

    E-Print Network [OSTI]

    Eisen, Michael

    WDTS Application & Review System (WARS) Mentor Manual #12;2 Table of Contents How To Log In ..................................................................................... 3 (supported browsers) Mentor Dashboard .................................................................................4 Mentor Profile

  14. WDTS Application & Review System (WARS) Mentor Manual

    E-Print Network [OSTI]

    Ohta, Shigemi

    1 WDTS Application & Review System (WARS) Mentor Manual #12;2 Table of Contents How To Log In ..................................................................................... 3 (supported browsers) Mentor Dashboard .................................................................................4 Mentor Profile

  15. PROJECT MANUAL FOR: Strand Union Building

    E-Print Network [OSTI]

    Dyer, Bill

    ...............................................................................................................017700 Operation and Maintenance Data .............................................................................................................. BP CONTRACT DOCUMENTS Included in the Printed Project Manual: Sample Standard Form of Contract, Form..................................................................................013100 Submittal Procedures

  16. Radiological Control Manual. Revision 0, January 1993

    SciTech Connect (OSTI)

    Not Available

    1993-04-01T23:59:59.000Z

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  17. Clinical Nurse Leader (CNL) Option Clinical Manual

    E-Print Network [OSTI]

    Dyer, Bill

    Clinical Nurse Leader (CNL) Option Clinical Manual 2011-2012 Reviewed August, 2011 Associate Dean...................................................................................................................................1 Clinical Nurse Leader Major Role Function.................................................................................1 Goal of the Clinical Practicum

  18. Power Marketing Administration Emergency Management Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-09-18T23:59:59.000Z

    This Manual establishes emergency management policy and requirements for emergency planning, preparedness, readiness assurance, and response for the Department's Power Marketing Administrations. Cancels DOE O 5500.11.

  19. Nuclear Explosive Safety Manual - DOE Directives, Delegations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1A Admin Chg 1, Nuclear Explosive Safety Manual by Carl Sykes Functional areas: Administrative Change, Defense Nuclear Facility Safety and Health Requirement, Nuclear Safety,...

  20. A manual of recommended practices for hydrogen energy systems

    SciTech Connect (OSTI)

    Hoagland, W.; Leach, S. [W. Hoagland and Associates, Boulder, CO (United States)

    1997-12-31T23:59:59.000Z

    Technologies for the production, distribution, and use of hydrogen are rapidly maturing and the number and size of demonstration programs designed to showcase emerging hydrogen energy systems is expanding. The success of these programs is key to hydrogen commercialization. Currently there is no comprehensive set of widely-accepted codes or standards covering the installation and operation of hydrogen energy systems. This lack of codes or standards is a major obstacle to future hydrogen demonstrations in obtaining the requisite licenses, permits, insurance, and public acceptance. In a project begun in late 1996 to address this problem, W. Hoagland and Associates has been developing a Manual of Recommended Practices for Hydrogen Systems intended to serve as an interim document for the design and operation of hydrogen demonstration projects. It will also serve as a starting point for some of the needed standard-setting processes. The Manual will include design guidelines for hydrogen procedures, case studies of experience at existing hydrogen demonstration projects, a bibliography of information sources, and a compilation of suppliers of hydrogen equipment and hardware. Following extensive professional review, final publication will occur later in 1997. The primary goal is to develop a draft document in the shortest possible time frame. To accomplish this, the input and guidance of technology developers, industrial organizations, government R and D and regulatory organizations and others will be sought to define the organization and content of the draft Manual, gather and evaluate available information, develop a draft document, coordinate reviews and revisions, and develop recommendations for publication, distribution, and update of the final document. The workshop, Development of a Manual of Recommended Practices for Hydrogen Energy Systems, conducted on March 11, 1997 in Alexandria, Virginia, was a first step.

  1. Classified Information Systems Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-08-03T23:59:59.000Z

    This Manual provides requirements and implementation instructions for the graded protection of the confidentiality, integrity, and availability of information processed on all automated information systems used to collect, create, process, transmit, store, and disseminate classified information by, or on behalf of, the Department of Energy (DOE). DOE N 205.4 cancels Chapter III section 8, Incident Reporting, and DOE N 205.3 cancels Chapter VI, paragraph 4j(2), 4j(6); and Chapter VII, paragraph 12a(2)(a). Cancels: DOE M 5639.6A-1. Canceled by DOE M 205.1-4.

  2. Sierra/SM theory manual.

    SciTech Connect (OSTI)

    Crane, Nathan Karl

    2013-07-01T23:59:59.000Z

    Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilites come closer to production level.

  3. GADRAS-DRF user's manual.

    SciTech Connect (OSTI)

    Theisen, Lisa Anne; Mitchell, Dean James; Thoreson, Gregory G.; Harding, Lee T.; Horne, Steve; Bradley, Jon David; Eldridge, Bryce Duncan; Amai, Wendy A.

    2013-09-01T23:59:59.000Z

    The Gamma Detector Response and Analysis Software-Detector Response Function (GADRAS-DRF) application computes the response of gamma-ray detectors to incoming radiation. This manual provides step-by-step procedures to acquaint new users with the use of the application. The capabilities include characterization of detector response parameters, plotting and viewing measured and computed spectra, and analyzing spectra to identify isotopes or to estimate flux profiles. GADRAS-DRF can compute and provide detector responses quickly and accurately, giving researchers and other users the ability to obtain usable results in a timely manner (a matter of seconds or minutes).

  4. The RadAssessor manual

    SciTech Connect (OSTI)

    Seitz, Sharon L.

    2007-02-01T23:59:59.000Z

    THIS manual will describe the functions and capabilities that are available from the RadAssessor database and will demonstrate how to retrieve and view its information. You’ll learn how to start the database application, how to log in, how to use the common commands, and how to use the online help if you have a question or need extra guidance. RadAssessor can be viewed from any standard web browser. Therefore, you will not need to install any special software before using RadAssessor.

  5. Changing Trends in the Bulk Chemicals and Pulp and Paper Industries (released in AEO2005)

    Reports and Publications (EIA)

    2005-01-01T23:59:59.000Z

    Compared with the experience of the 1990s, rising energy prices in recent years have led to questions about expectations of growth in industrial output, particularly in energy-intensive industries. Given the higher price trends, a review of expected growth trends in selected industries was undertaken as part of the production of Annual Energy Outlook 2005 (AEO). In addition, projections for the industrial value of shipments, which were based on the Standard Industrial Classification (SIC) system in AEO2004, are based on the North American Industry Classification System (NAICS) in AEO2005. The change in industrial classification leads to lower historical growth rates for many industrial sectors. The impacts of these two changes are highlighted in this section for two of the largest energy-consuming industries in the U.S. industrial sector-bulk chemicals and pulp and paper.

  6. DUTY STATEMENT CLASSIFICATION

    E-Print Network [OSTI]

    studies, environmental impact reports, and Commission reports. (E) #12;CLASSIFICATION: Planner I - EFS of Environmental Impact Reports submitted to the Commission and prepares assessments of those sections. (M) 5 TITLE: Biologist DIVISION: Siting, Transmission & Environmental Protection DATE PREPARED: October 3

  7. Classification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsNovember 13, 2014 Building AmericaEnergyandClassification Classification

  8. Manual

    Energy Savers [EERE]

    1 2 Positive Attributes 4 3 Weaknesses 7 4 Results 9 4.1 Work Planning and Control Processes 9 4.2 Essential System Functionality 14 4.3 Focus Areas 17 4.4 Feedback and...

  9. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Abbreviations i 1 Introduction 1 2 Positive Attributes 5 3 Weaknesses 9 4 Results 12 4.1 Work Planning and Control 12 4.2 Focus Areas 14 4.3 Feedback and Improvement 16 5...

  10. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Tennessee Technology Park HSS Office of Health, Safety and Security ISM Integrated Safety Management ORO Oak Ridge Office PPE Personal Protective Equipment RWP Radiological Work...

  11. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Report for Calendar Year 2007 on Status of Implementation of Integrated Safety Management at the Department of Energy June 2008 Office of Health, Safety and Security Office of the...

  12. Manual

    Broader source: Energy.gov (indexed) [DOE]

    that must be retrieved from the Document Control System and verified to be the latest revision prior to use; (5) promoting craft and technician entry of maintenance history...

  13. Manual

    Broader source: Energy.gov (indexed) [DOE]

    operations center (EOC) activates. In addition, although adequately presented in lesson plans, the training does not appear to have been effective in conveying the concept of...

  14. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Oversight inspection; and (3) the Y-12 VSS system engineer and the YSO SSO programs. Tooling Manufacture resUlts | 13 Independent Oversight Functionality of Selected Essential...

  15. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Nuclear Safety at the Oak Ridge National Laboratory Radiochemical Engineering Development Center, Building 7920 October 2008 Office of Environment, Safety and Health Evaluations...

  16. Manual

    Broader source: Energy.gov (indexed) [DOE]

    COnTenTs Independent Oversight abbrevIaTIOns | i abbreviations Used in This report CDNS NNSA Chief, Defense Nuclear Safety CFR Code of Federal Regulations DNFSB Defense Nuclear...

  17. Manual

    Broader source: Energy.gov (indexed) [DOE]

    segregated from non- safety items, non-conforming items were not separated from normal stock, and controls to ensure only authorized issuance and use were not always...

  18. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Emergency Operations Center EPHA Emergency Planning Hazards Assessment EPI Emergency Public Information EPO Emergency Programs Organization EPZ Emergency Planning Zone ERAP...

  19. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Performance Test OEM BNL Office of Emergency Management PA Protective Action PIO Public Information Officer SAE Site Area Emergency SC-31.1 DOE Office of Science,...

  20. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Emergency Operations Center EPHA Emergency Planning Hazards Assessment EPI Emergency Public Information EPICode Emergency Prediction Information Code EPZ Emergency Planning Zone...

  1. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Regulations CHSP Chemical Hygiene and Safety Plan CMS Chemical Management System CSD LBNL Chemical Sciences Division DOE U.S. Department of Energy EH&S LBNL Environment, Health,...

  2. Manual

    Broader source: Energy.gov (indexed) [DOE]

    research in the areas of nuclear physics, theoretical and computational physics, superconducting accelerator operations, and -lasers (FELs). To accomplish this mission, TJNAF...

  3. Manual

    Broader source: Energy.gov (indexed) [DOE]

    safe confinement of radioactive materials under normal conditions and during certain accident conditions, including a fire or explosion in a laboratory room. The mission of RPL...

  4. Manual

    Broader source: Energy.gov (indexed) [DOE]

    of Health, Safety and Security HSS Independent Oversight Special Review of Construction Safety and Health Programs August 2008 Office of Independent Oversight Office of Health,...

  5. Manual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetterEconomyDr.Energy University

  6. Manual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetterEconomyDr.Energy UniversityOversight Inspection of

  7. Automated manual transmission clutch controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (9375 Kearney Rd., Whitmore Lake, MI 48189); Reed, Jr., Richard G. (3003 Bembridge, Royal Oak, MI 48073); Rausen, David J. (519 S. Gaylord St., Denver, CO 80209)

    1999-11-30T23:59:59.000Z

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  8. Implementation Manual Self-Management Programs

    E-Print Network [OSTI]

    Straight, Aaron

    i Implementation Manual Stanford Self-Management Programs 2008* Please note that while this manual is written for the Chronic Disease Self-Management Program (CDSMP) it can also be used for any of the other Stanford small group programs (Diabetes Self- Management, Positive Self-Management Program, Pain Self

  9. HUMAN RESOURCES MANUAL SECTION 1: GENERAL PROVISIONS

    E-Print Network [OSTI]

    HUMAN RESOURCES MANUAL SECTION 1: GENERAL PROVISIONS 1 | P a g e S e c t i o n 1 Purpose The purpose of this Human Resources Manual is to: 1. Provide the personnel and payroll policies and procedures, regulations and benefits. 3. Establish requirements and instructions for submission of Human Resources System

  10. Arras User's Manual John B. Smith

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    Arras User's Manual TR85-036 1985 John B. Smith The University of North Carolina at Chapel Hill'S MANUAL John B. Smith Department or Computer Science University or North Carolina Chapel Hill, North Carolina 27514 Copyright© 1984 by John B. Smith #12;Starling ARRAS Note for those not using TUCC: The ARRAS

  11. LASER SAFETY POLICY MANUAL ENVIRONMENTAL HEALTH & SAFETY

    E-Print Network [OSTI]

    Houston, Paul L.

    LASER SAFETY POLICY MANUAL ISSUED BY ENVIRONMENTAL HEALTH & SAFETY OFFICE OF RADIOLOGICAL SAFETY and GEORGIA TECH LASER SAFETY COMMITTEE July 1, 2010 Revised July 31, 2012 #12;Laser Safety Program 1-1 #12;Laser Safety Policy Manual TABLE OF CONTENTS 1. POLICY AND SCOPE

  12. Laser Safety Manual Scope and Applicability

    E-Print Network [OSTI]

    Rhoads, James

    Laser Safety Manual Scope and Applicability This manual applies to all personnel working at or visiting ASU who procure or utilize Class III and Class IV lasers and laser systems. Procurement and user of Class I and Class II laser equipment, such as laser pointers and compact disk players, do not normally

  13. LASER SAFETY MANUAL POLICIES AND PROCEDURES

    E-Print Network [OSTI]

    Zhang, Yuanlin

    LASER SAFETY MANUAL POLICIES AND PROCEDURES FOR LASER SAFETY AT TEXAS TECH UNIVERSITY LUBBOCK, TEXAS September 2002 #12;V-1 TEXAS TECH UNIVERSITY LASER SAFETY MANUAL TABLE OF CONTENTS SECTION I ­ MANAGEMENT OF LASER LICENSE Introduction A. Laser Safety Program I - 1 B. Radiation Laser Safety Committee I

  14. ENVIRONMENTAL HEALTH AND SAFETY GENERAL SAFETY MANUAL

    E-Print Network [OSTI]

    Maroncelli, Mark

    ENVIRONMENTAL HEALTH AND SAFETY GENERAL SAFETY MANUAL May 10, 2002 #12;i Acknowledgements Environmental Health and Safety gratefully acknowledges the assistance provided by the University Safety Council extremely helpful. #12;ii Environmental Health and Safety General Safety Manual Table of Contents Section

  15. UC Davis Policy and Procedure Manual Introduction

    E-Print Network [OSTI]

    California at Davis, University of

    UC Davis Policy and Procedure Manual Introduction Development and Management of Campus Sections Exhibit B, Policy Development Best Practices Exhibit C, New Policy Development Plan Exhibit D of the Chancellor and Provost Source Document: N/A 1 of 5 Exhibit A, Structure for Policy and Procedure Manual

  16. USACE Value Engineering Manual of Practice

    E-Print Network [OSTI]

    US Army Corps of Engineers

    1 1 USACE Value Engineering Manual of Practice Foreward. This Value Engineering (VE) Manual of Practice has been prepared to provide guidance to USACE District Value Engineering Officers (VEOs the Project Management Plan; VE program planning, management and execution, including USACE metrics; records

  17. USER'S MANUAL Revision 1.1b

    E-Print Network [OSTI]

    Maccabe, Barney

    Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies onlySUPER ® X7DB3 USER'S MANUAL Revision 1.1b #12;Unless you request and receive written permission in this User's Manual has been carefully reviewed and is believed to be accurate. The vendor assumes

  18. SURGEURGEAnd Move Planning Manual WHAT IT MEANS

    E-Print Network [OSTI]

    Doudna, Jennifer A.

    SURGEURGEAnd Move Planning Manual A GUIDE ON WHAT IT MEANS TO SURGE, HOW LONG IT WILL TAKE AND THE BEST WAY TO GET THROUGH IT Produced by: University of California, Berkeley Capital Projects #12 Manual describes the surge planning process and provides an overview of roles and responsibilities

  19. Page 1 of 55 RESEARCH CENTER MANUAL

    E-Print Network [OSTI]

    Das, Suman

    with the necessary approval procedures. The section on research center operations provides ideas and best practicesPage 1 of 55 RESEARCH CENTER MANUAL Starting and Operating a Georgia Tech Research Center GEORGIA Corporation #12;Page 2 of 55 #12;Page 3 of 55 RESEARCH CENTER MANUAL TABLE OF CONTENTS Executive Summary 4

  20. Davis PV plant operation and maintenance manual

    SciTech Connect (OSTI)

    NONE

    1994-09-01T23:59:59.000Z

    This operation and maintenance manual contains the information necessary to run the Photovoltaics for Utility Scale Applications (PVUSA) test facility in Davis, California. References to more specific information available in drawings, data sheets, files, or vendor manuals are included. The PVUSA is a national cooperative research and demonstration program formed in 1987 to assess the potential of utility scale photovoltaic systems.

  1. R Reference Manual: A gentle overview

    E-Print Network [OSTI]

    Priestley, Jennifer Lewis

    , yet similar to SAS, R is a commands-driven programming environment to execute statistical analysisR Reference Manual: A gentle overview #12;2 Developed and maintained by the Center for Statistics statistical computing packages ­ Excel, SPSS, Minitab, R and SAS. 1 Readers of this manual are assumed to have

  2. LMD Martian Mesoscale Model User Manual

    E-Print Network [OSTI]

    Spiga, Aymeric

    LMD Martian Mesoscale Model [LMD-MMM] User Manual A. Spiga aymeric.spiga@upmc.fr Laboratoire de;#12;Contents 1 What is the LMD Martian Mesoscale Model? 3 1.1 Dynamical core on mesoscale levels . . . . . . . . . . . . . . . 35 iii #12;iv User Manual for the LMD Martian Mesoscale Model

  3. Hoisting and rigging manual: Uncontrolled document

    SciTech Connect (OSTI)

    NONE

    1991-05-01T23:59:59.000Z

    This document is a draft copy of a Hoisting and Rigging Manual for the Department of Energy. The manual is divided into ten chapters. The chapter titles follow: terminology and definitions; operator training and qualification; overhead and gantry cranes; mobile cranes; forklift trucks; hoists; hooks; wire rope, slings, and rigging accessories; construction hoisting and rigging equipment requirements; references.

  4. Information Security Policy Manual Latest Revision: May 16, 2012

    E-Print Network [OSTI]

    Alpay, S. Pamir

    1 Information Security Policy Manual Latest Revision: May 16, 2012 #12;2 Table of Contents Information Security Policy Manual...............................................................................................................................................17 Information Security Glossary

  5. CLINICAL EDUCATION MANUAL Last revised: September 3, 2014

    E-Print Network [OSTI]

    Ollivier-Gooch, Carl

    CLINICAL EDUCATION MANUAL Last revised: September 3, 2014 #12;#12;UBC PT Clinical Education Manual ............................................................................................................................................................. 11 UBC MPT Clinical Education Vision Statement................................................................................................................... 11 Clinical Education PACE Committee

  6. CLINICAL EDUCATION MANUAL Last revised: December 5, 2013

    E-Print Network [OSTI]

    Michelson, David G.

    CLINICAL EDUCATION MANUAL Last revised: December 5, 2013 #12;#12;UBC PT Clinical Education Manual ............................................................................................................................................................. 11 UBC MPT Clinical Education Vision Statement................................................................................................................... 11 Clinical Education PACE Committee

  7. CLINICAL EDUCATION MANUAL Last revised: August 29, 2013

    E-Print Network [OSTI]

    Michelson, David G.

    CLINICAL EDUCATION MANUAL Last revised: August 29, 2013 #12;#12;UBC PT Clinical Education Manual ............................................................................................................................................................. 11 UBC MPT Clinical Education Vision Statement................................................................................................................... 11 Clinical Education PACE Committee

  8. Hydrogen Fuel Cell Engines and Related Technologies Course Manual...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Validation Hydrogen Fuel Cell Engines and Related Technologies Course Manual Hydrogen Fuel Cell Engines and Related Technologies Course Manual Photo of...

  9. Commercial Vehicle Classification using Vehicle Signature Data

    E-Print Network [OSTI]

    Liu, Hang; Jeng, Shin-Ting; Andre Tok, Yeow Chern; Ritchie, Stephen G.

    2008-01-01T23:59:59.000Z

    Traffic Measurement and Vehicle Classification with SingleG. Ritchie. Real-time Vehicle Classification using InductiveReijmers, J.J. , "On-line vehicle classification," Vehicular

  10. Guidelines for water use. Manual

    SciTech Connect (OSTI)

    Crook, J.; Ammerman, D.

    1992-09-01T23:59:59.000Z

    The manual is a valuable tool for regulatory agencies at all levels of government, engineers, planners, and all other groups affected by water reuse problems. Key water reuse planning issues are identified and discussed in a manner that librally employs case study experience to illustrate the importance of each issue and successful solutions. A comprehensive listing of state water reuse guidelines by category of reuse is provided, along with an analysis of the variations between states within each category. The analysis is then followed with a series of suggested guidelines for water quality required for each category of reuse. These guidelines are based on the state guidelines and experience described earlier, and they offer a suggested starting point for state, regional, and local governments that plan to establish water reuse procedures, both in terms of water quality requirements and procedures for design, operation, and monitoring.

  11. ROOT CAUSE ANALYSIS PROGRAM MANUAL

    SciTech Connect (OSTI)

    Gravois, Melanie C.

    2007-05-02T23:59:59.000Z

    Root Cause Analysis (RCA) identifies the cause of an adverse condition that, if corrected, will preclude recurrence or greatly reduce the probability of recurrence of the same or similar adverse conditions and thereby protect the health and safety of the public, the workers, and the environment. This procedure sets forth the requirements for management determination and the selection of RCA methods and implementation of RCAs that are a result of significant findings from Price-Anderson Amendments Act (PAAA) violations, occurrences/events, Significant Adverse Conditions, and external oversight Corrective Action Requests (CARs) generated by the Office of Enforcement (PAAA headquarters), the U.S. Environmental Protection Agency, and other oversight entities against Lawrence Berkeley National Laboratory (LBNL). Performance of an RCA may result in the identification of issues that should be reported in accordance with the Issues Management Program Manual.

  12. Common occupational classification system - revision 3

    SciTech Connect (OSTI)

    Stahlman, E.J.; Lewis, R.E.

    1996-05-01T23:59:59.000Z

    Workforce planning has become an increasing concern within the DOE community as the Office of Environmental Restoration and Waste Management (ER/WM or EM) seeks to consolidate and refocus its activities and the Office of Defense Programs (DP) closes production sites. Attempts to manage the growth and skills mix of the EM workforce while retaining the critical skills of the DP workforce have been difficult due to the lack of a consistent set of occupational titles and definitions across the complex. Two reasons for this difficulty may be cited. First, classification systems commonly used in industry often fail to cover in sufficient depth the unique demands of DOE`s nuclear energy and research community. Second, the government practice of contracting the operation of government facilities to the private sector has introduced numerous contractor-specific classification schemes to the DOE complex. As a result, sites/contractors report their workforce needs using unique classification systems. It becomes difficult, therefore, to roll these data up to the national level necessary to support strategic planning and analysis. The Common Occupational Classification System (COCS) is designed to overcome these workforce planning barriers. The COCS is based on earlier workforce planning activities and the input of technical, workforce planning, and human resource managers from across the DOE complex. It provides a set of mutually-exclusive occupation titles and definitions that cover the broad range of activities present in the DOE complex. The COCS is not a required record-keeping or data management guide. Neither is it intended to replace contractor/DOE-specific classification systems. Instead, the system provides a consistent, high- level, functional structure of occupations to which contractors can crosswalk (map) their job titles.

  13. Operations and Maintenance Manual for Large Aperture Scanner System

    SciTech Connect (OSTI)

    Jones, Anthony M.; Hall, Thomas E.

    2010-04-08T23:59:59.000Z

    Operations and maintenance manual includes detailed instructions for system assembly, use, and maintenance.

  14. ENVIRONMENTAL HEALTH, SAFETY, AND RISK MANAGEMENT COMPREHENSIVE MANUAL

    E-Print Network [OSTI]

    Shihadeh, Alan

    and healthy environment, to develop and facilitate emergency management best practices, to assist and educateENVIRONMENTAL HEALTH, SAFETY, AND RISK MANAGEMENT COMPREHENSIVE MANUAL Table of Contents Mission Manual Chapter VIII - Radiation Safety Technical Manual Chapter IX - Risk Management Technical Manual

  15. ENVIRONMENT, SAFETY & HEALTH DIVISION Chapter 0: About This Manual

    E-Print Network [OSTI]

    Wechsler, Risa H.

    ENVIRONMENT, SAFETY & HEALTH DIVISION Chapter 0: About This Manual Publishing: ESH Manual Revision 2010 URL: http://www-group.slac.stanford.edu/esh/eshmanual/references/pubsProcedManual.pdf 1 Purpose This procedure describes how ESH Manual content is revised, deleted, reviewed, and approved consistently

  16. 01.03 1 Policy & Regulation Manuals REGENTS' POLICY

    E-Print Network [OSTI]

    Pantaleone, Jim

    01.03 1 Policy & Regulation Manuals REGENTS' POLICY PART I ­ MISSION AND GENERAL PROVISIONS Chapter 01.03 ­ Policy and Regulation Manuals P01.03.010. Policies and Regulations; Manuals. A. Policies by the President of the University. Adopted policies shall be maintained in the form of a Policy Manual and set out

  17. Infinite dimensional discrimination and classification

    E-Print Network [OSTI]

    Shin, Hyejin

    2007-09-17T23:59:59.000Z

    classification methodologies for such data have been suggested and supporting theory is quite limited. The focus of this dissertation is on discrimination and classification in this infinite dimensional setting. The methodology and theory we develop are based...

  18. OTHER INDUSTRIES

    Broader source: Energy.gov [DOE]

    AMO funded research results in novel technologies in diverse industries beyond the most energy intensive ones within the U.S. Manufacturing sector. These technologies offer quantifiable energy...

  19. Hazard Classification for Fuel Supply Shutdown Facility

    SciTech Connect (OSTI)

    BENECKE, M.W.

    2000-09-07T23:59:59.000Z

    Final hazard classification for the 300 Area N Reactor fuel storage facility resulted in the assignment of Nuclear Facility Hazard Category 3 for the uranium metal fuel and feed material storage buildings (303-A, 303-B, 303-G, 3712, and 3716). Radiological for the residual uranium and thorium oxide storage building and an empty former fuel storage building that may be used for limited radioactive material storage in the future (303-K/3707-G, and 303-E), and Industrial for the remainder of the Fuel Supply Shutdown buildings (303-F/311 Tank Farm, 303-M, 313-S, 333, 334 and Tank Farm, 334-A, and MO-052).

  20. Instructor training manual: For use with energy conservation practices participant manual

    SciTech Connect (OSTI)

    Not Available

    1988-05-01T23:59:59.000Z

    This manual is a tool for instruction to residential building tenants who are interested in enhancing energy conservation practices in their homes. (BCS)

  1. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-11-07T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 231.1, ENVIRONMENT, SAFETY AND HEALTH REPORTING, which establishes management objectives and requirements for reporting environment, safety and health information. Chg 1, 11-7-96.

  2. Environment Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. Does not cancel other directives.

  3. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-12-31T23:59:59.000Z

    This Manual defines safety management functions, responsibilities, and authorities for DOE senior management with responsibilities for line, support, oversight, and enforcement actions. Cancels DOE M 411.1-1B. Canceled by DOE O 450.2.

  4. DOE Manual Studies Terrestrial Carbon Sequestration

    Broader source: Energy.gov [DOE]

    There is considerable opportunity and growing technical sophistication to make terrestrial carbon sequestration both practical and effective, according to the latest carbon capture and storage "best practices" manual issued by the U.S. Department of Energy.

  5. Alternative Fuel Driver Training Companion Manual

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    Training manual serves as a companion to alternative fuel training presentations on the fueling and use of vehicles that run on compressed natural gas, biodiesel, E85, and propane.

  6. The Condor Programmer's Manual - Version II

    E-Print Network [OSTI]

    Narasimhan, Sundar

    This is the CONDOR programmer's manual, that describes the hardware and software that form the basis of the real-time computational architecture built originally for the Utah-MIT hand. The architecture has been used ...

  7. Paper Airplane user's manual : version four

    E-Print Network [OSTI]

    Lajoie, Ronnie M.

    Preface: This document provides the user with a step-by-step guide to using Paper Airplane, Version IV. Although this program can be used to design any system (once given the proper set of design equations), this manual ...

  8. RIS-M-2480 USERS MANUAL

    E-Print Network [OSTI]

    RISÃ?-M-2480 RIKKE USERS MANUAL P. Haastrup, J.V. Olsen, J.R. Taylor, Axel Damborg and N and failure analysis used in the system is described in Automatic Fault Tree and Consequence Analysis (Taylor

  9. Productivity Improvement of a Manual Assembly Line

    E-Print Network [OSTI]

    Yerasi, Pranavi

    2012-10-19T23:59:59.000Z

    The current project addresses the productivity improvement of a manual assembly line by making use of operations analysis in the framework of Lean production. A methodology is proposed that helps to improve the productivity of any production process...

  10. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-10-08T23:59:59.000Z

    This Manual defines safety management functions, responsibilities, and authorities for DOE senior management with responsibilities for line, support, oversight, and enforcement actions. Canceled by DOE M 411.1-1A. Does not cancel other directives.

  11. UNDERGRADUATE STUDENT MANUAL Department of Mechanical Engineering

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    engineering (for example, computer-aided-design and manufacturing (CAD/CAM), energy engineering, mechanical1 UNDERGRADUATE STUDENT MANUAL Department of Mechanical Engineering and Applied Mechanics Engineering and Applied Mechanics? ........................................................................3

  12. Training Manuals All up to date training manuals can be found at the Student Information Users Group in PAWS.

    E-Print Network [OSTI]

    Saskatchewan, University of

    Training Manuals All up to date training manuals can be found at the Student Information Users on Files (left side) d. Click on Training Manuals e. Click on the Class Maintenance file f. Building New a member.) c. Click on Files (left side) d. Click on Training Manuals e. Click on the Registration file f

  13. Position Management and Classification

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-04-01T23:59:59.000Z

    The order establishes departmental requirements and responsibilities for classifying positions using general schedule (GS) and federal wage system (FWS) standards and for developing and administering a sound position management and classification program within the Department. Cancels Chapter VII of DOE O 320.1.

  14. Automatic Fault Characterization via Abnormality-Enhanced Classification

    SciTech Connect (OSTI)

    Bronevetsky, G; Laguna, I; de Supinski, B R

    2010-12-20T23:59:59.000Z

    Enterprise and high-performance computing systems are growing extremely large and complex, employing hundreds to hundreds of thousands of processors and software/hardware stacks built by many people across many organizations. As the growing scale of these machines increases the frequency of faults, system complexity makes these faults difficult to detect and to diagnose. Current system management techniques, which focus primarily on efficient data access and query mechanisms, require system administrators to examine the behavior of various system services manually. Growing system complexity is making this manual process unmanageable: administrators require more effective management tools that can detect faults and help to identify their root causes. System administrators need timely notification when a fault is manifested that includes the type of fault, the time period in which it occurred and the processor on which it originated. Statistical modeling approaches can accurately characterize system behavior. However, the complex effects of system faults make these tools difficult to apply effectively. This paper investigates the application of classification and clustering algorithms to fault detection and characterization. We show experimentally that naively applying these methods achieves poor accuracy. Further, we design novel techniques that combine classification algorithms with information on the abnormality of application behavior to improve detection and characterization accuracy. Our experiments demonstrate that these techniques can detect and characterize faults with 65% accuracy, compared to just 5% accuracy for naive approaches.

  15. Home audit program: management manual

    SciTech Connect (OSTI)

    Not Available

    1980-09-01T23:59:59.000Z

    Many public power systems have initiated home energy audit programs in response to the requests of their consumers. The manual provides smaller public power systems with the information and specific skills needed to design and develop a program of residential energy audits. The program is based on the following precepts: locally owned public systems are the best, and in many cases the only agencies available to organize and coordinate energy conservation programs in many smaller communities; consumers' rights to energy conservation information and assistance should not hinge on the size of the utility that serves them; in the short run, public power systems of all sizes should offer residential energy conservation assistance to their consumers, because such assistance is desirable, necessary, and in the public interest; and in the long run, such programs will complement national energy goals and will produce economic benefits for both consumers and the public power system. A detailed description of home audit program planning, organization, and management are given. (MCW)

  16. Hanford whole body counting manual

    SciTech Connect (OSTI)

    Palmer, H.E.; Rieksts, G.A.; Lynch, T.P.

    1990-06-01T23:59:59.000Z

    This document describes the Hanford Whole Body Counting Program as it is administered by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy--Richland Operations Office (DOE-RL) and its Hanford contractors. Program services include providing in vivo measurements of internally deposited radioactivity in Hanford employees (or visitors). Specific chapters of this manual deal with the following subjects: program operational charter, authority, administration, and practices, including interpreting applicable DOE Orders, regulations, and guidance into criteria for in vivo measurement frequency, etc., for the plant-wide whole body counting services; state-of-the-art facilities and equipment used to provide the best in vivo measurement results possible for the approximately 11,000 measurements made annually; procedures for performing the various in vivo measurements at the Whole Body Counter (WBC) and related facilities including whole body counts; operation and maintenance of counting equipment, quality assurance provisions of the program, WBC data processing functions, statistical aspects of in vivo measurements, and whole body counting records and associated guidance documents. 16 refs., 48 figs., 22 tabs.

  17. Tank farms criticality safety manual

    SciTech Connect (OSTI)

    FORT, L.A.

    2003-03-27T23:59:59.000Z

    This document defines the Tank Farms Contractor (TFC) criticality safety program, as required by Title 10 Code of Federal Regulations (CFR), Subpart 830.204(b)(6), ''Documented Safety Analysis'' (10 CFR 830.204 (b)(6)), and US Department of Energy (DOE) 0 420.1A, Facility Safety, Section 4.3, ''Criticality Safety.'' In addition, this document contains certain best management practices, adopted by TFC management based on successful Hanford Site facility practices. Requirements in this manual are based on the contractor requirements document (CRD) found in Attachment 2 of DOE 0 420.1A, Section 4.3, ''Nuclear Criticality Safety,'' and the cited revisions of applicable standards published jointly by the American National Standards Institute (ANSI) and the American Nuclear Society (ANS) as listed in Appendix A. As an informational device, requirements directly imposed by the CRD or ANSI/ANS Standards are shown in boldface. Requirements developed as best management practices through experience and maintained consistent with Hanford Site practice are shown in italics. Recommendations and explanatory material are provided in plain type.

  18. HTGR Cost Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01T23:59:59.000Z

    The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

  19. Insolation data manual and direct normal solar radiation data manual

    SciTech Connect (OSTI)

    none,

    1990-07-01T23:59:59.000Z

    The Insolation Data Manual presents monthly averaged data which describes the availability of solar radiation at 248 National Weather Service (NWS) stations, principally in the United States. Monthly and annual average daily insolation and temperature values have been computed from a base of 24--25 years of data, generally from 1952--1975, and listed for each location. Insolation values represent monthly average daily totals of global radiation on a horizontal surface and are depicted using the three units of measurement: kJ/m{sup 2} per day, Btu/ft{sup 2} per day and langleys per day. Average daily maximum, minimum and monthly temperatures are provided for most locations in both Celsius and Fahrenheit. Heating and cooling degree-days were computed relative to a base of 18.3 C (65 F). For each station, global {bar K}{sub T} (cloudiness index) values were calculated on a monthly and annual basis. Global {bar K}{sub T} is an index of cloudiness and indicates fractional transmittance of horizontal radiation, from the top of the atmosphere to the earth's surface. The second section of this volume presents long-term monthly and annual averages of direct normal solar radiation for 235 NWS stations, including a discussion of the basic derivation process. This effort is in response to a generally recognized need for reliable direct normal data and the recent availability of 23 years of hourly averages for 235 stations. The relative inaccessibility of these data on microfiche further justifies reproducing at least the long-term averages in a useful format. In addition to a definition of terms and an overview of the ADIPA model, a discussion of model validation results is presented.

  20. Energy Conservation Through Heating/Cooling Retrofits in Small and Medium-Sized Industrial Plants

    E-Print Network [OSTI]

    Saman, N.; Eggebrecht, J.

    .1O/MCF). The estimated implementation cost is $6524 resulting in a simple payback period of 2.2 years. 2- HVAC Controls and Operations Manual thermostats were suggested to be replaced by programmable thermostats at different industrial plants... office areas. We will discuss three examples that involve plants manufacturing drill bits for the petroleum industry, soft drinks and soft drink syrups, and newspaper industries [7,8,9]. For the drill bits industry, none of the several thermostats...

  1. Guidance Manual for K-12 SchoolsGuidance Manual for K-12 Schools prepared for

    E-Print Network [OSTI]

    Jia, Songtao

    Compliance and Best Management Practices prepared by: October 2006 Facilities O peration and Ma intenanceAreas .............................................................................................1-5 1.3 Best Management PracticesGuidance Manual for K-12 SchoolsGuidance Manual for K-12 Schools prepared for: Environmental

  2. Manual: Compendium of CERCLA Response Selection Guidance Documents, Users Manual.

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling CorpNewCF INDUSTRIES,L? .-IGYS,:?' _.JI' ;i.\'

  3. Integration of heat pumps into industrial processes

    SciTech Connect (OSTI)

    Chappell, R.N. (USDOE, Washington, DC (USA)); Priebe, S.J. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

    1989-01-01T23:59:59.000Z

    The Department of Energy and others have funded studies to assess the potential for energy savings using industrial heat pumps. The studies included classifications of heat pumps, economic evaluations, and placement of heat pumps in industrial processes. Pinch technology was used in the placement studies to determine the placement, size, and type of heat pumps for a given applications. There appears to be considerable scope for heat pumping in several industries, but, where maximum process energy savings are desired, it is important to consider heat pumping in the context of overall process integration. 19 refs., 15 figs.

  4. Classification of Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1978-12-12T23:59:59.000Z

    To provide specific responsibilities, standards, and procedures for the management of the Department of Energy (DOE) classification system. Cancels DOE O 5650.1, dated 7-18-78; DOE N 5650.1, dated 8-7-78; DOE N 5650.2, dated 8-7-78; DOE N 5650.3, dated 8-7-78. Canceled by DOE O 5650.2A, dated 5-8-95

  5. Seismic event classification system

    DOE Patents [OSTI]

    Dowla, Farid U. (Castro Valley, CA); Jarpe, Stephen P. (Brentwood, CA); Maurer, William (Livermore, CA)

    1994-01-01T23:59:59.000Z

    In the computer interpretation of seismic data, the critical first step is to identify the general class of an unknown event. For example, the classification might be: teleseismic, regional, local, vehicular, or noise. Self-organizing neural networks (SONNs) can be used for classifying such events. Both Kohonen and Adaptive Resonance Theory (ART) SONNs are useful for this purpose. Given the detection of a seismic event and the corresponding signal, computation is made of: the time-frequency distribution, its binary representation, and finally a shift-invariant representation, which is the magnitude of the two-dimensional Fourier transform (2-D FFT) of the binary time-frequency distribution. This pre-processed input is fed into the SONNs. These neural networks are able to group events that look similar. The ART SONN has an advantage in classifying the event because the types of cluster groups do not need to be pre-defined. The results from the SONNs together with an expert seismologist's classification are then used to derive event classification probabilities.

  6. Seismic event classification system

    DOE Patents [OSTI]

    Dowla, F.U.; Jarpe, S.P.; Maurer, W.

    1994-12-13T23:59:59.000Z

    In the computer interpretation of seismic data, the critical first step is to identify the general class of an unknown event. For example, the classification might be: teleseismic, regional, local, vehicular, or noise. Self-organizing neural networks (SONNs) can be used for classifying such events. Both Kohonen and Adaptive Resonance Theory (ART) SONNs are useful for this purpose. Given the detection of a seismic event and the corresponding signal, computation is made of: the time-frequency distribution, its binary representation, and finally a shift-invariant representation, which is the magnitude of the two-dimensional Fourier transform (2-D FFT) of the binary time-frequency distribution. This pre-processed input is fed into the SONNs. These neural networks are able to group events that look similar. The ART SONN has an advantage in classifying the event because the types of cluster groups do not need to be pre-defined. The results from the SONNs together with an expert seismologist's classification are then used to derive event classification probabilities. 21 figures.

  7. Program desk manual for occupational safety and health -- U.S. Department of Energy Richland Operations, Office of Environment Safety and Health

    SciTech Connect (OSTI)

    Musen, L.G.

    1998-08-27T23:59:59.000Z

    The format of this manual is designed to make this valuable information easily accessible to the user as well as enjoyable to read. Each chapter contains common information such as Purpose, Scope, Policy and References, as well as information unique to the topic at hand. This manual can also be provided on a CD or Hanford Internet. Major topics include: Organization and program for operational safety; Occupational medicine; Construction and demolition; Material handling and storage; Hoisting and rigging; Explosives; Chemical hazards; Gas cylinders; Electrical; Boiler and pressure vessels; Industrial fire protection; Industrial hygiene; and Safety inspection checklist.

  8. NV/YMP RADIOLOGICAL CONTROL MANUAL

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE; BECHTEL NEVADA

    2004-11-01T23:59:59.000Z

    This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) and the Yucca Mountain Office of Repository Development (YMORD). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations Part 835 (10 CFR 835), Occupational Radiation Protection. Programs covered by this manual are located at the Nevada Test Site (NTS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Pleasanton, California; and at Andrews Air Force Base, Maryland. In addition, field work by NNSA/NSO at other locations is also covered by this manual.

  9. Classification of fossil fuels according to structural-chemical characteristics

    SciTech Connect (OSTI)

    A.M. Gyul'maliev; G.S. Golovin; S.G. Gagarin [Institute for Fossil Fuels, Moscow (Russian Federation)

    2007-10-15T23:59:59.000Z

    On the basis of a set of linear equations that relate the amount of major elements n{sub E} (E = C, H, O, N, S) in the organic matter of fossil fuels to structural characteristics, such as the number of cycles R, the number of atoms n{sub E}, the number of mutual chemical bonds, the degree of unsaturation of the structure {delta}, and the extent of its reduction B, a structural-chemical classification of fossil coals that is closely related to the parameters of the industrial-genetic classification (GOST 25543-88) is proposed. Structural-chemical classification diagrams are constructed for power-generating coals of Russia; coking coals; and coals designed for nonfuel purposes including the manufacture of adsorbents, synthetic liquid fuel, ion exchangers, thermal graphite, and carbon-graphite materials.

  10. Hanford Waste Vitrification Plant technical manual

    SciTech Connect (OSTI)

    Larson, D.E. [ed.; Watrous, R.A.; Kruger, O.L. [and others

    1996-03-01T23:59:59.000Z

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

  11. Innovative and Alternative Technology Assessment Manual

    SciTech Connect (OSTI)

    None

    1980-02-01T23:59:59.000Z

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  12. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Endres. William J.

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve and ledges and clean fixtures. Maintain building entrances according to conditions by removing snow and ice

  13. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  14. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  15. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

  16. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  17. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  18. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: BUILDING MECHANIC II (Pay, parking lots, elevators, snow conditions, HVAC equipment temperature control systems, pool systems, ice

  19. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE entrances according to conditions by removing snow and ice, applying sand and salt, and removing debris

  20. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

  1. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

  2. Revision of DOE Manual 460.2-1

    Broader source: Energy.gov (indexed) [DOE]

    , 2005 TECWG 1 Revision of DOE M 460.2-1, Radioactive Material Transportation Practices Manual Revision of DOE M 460.2-1, Radioactive Material Transportation Practices Manual Ella...

  3. Physical Geology Laboratory Manual Charles Merguerian and J Bret Bennington

    E-Print Network [OSTI]

    Merguerian, Charles

    Physical Geology Laboratory Manual Charles Merguerian and J Bret Bennington Geology Department Hofstra University © 2006 #12;i PHYSICAL GEOLOGY LABORATORY MANUAL Ninth Edition Professors Charles Merguerian and J Bret Bennington Geology Department Hofstra University #12;ii ACKNOWLEDGEMENTS We thank

  4. Reimbursable Work for Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 481.1. Does not cancel other directives.

  5. Training Manual for Micro, Small and Medium Entrepreneurs in...

    Open Energy Info (EERE)

    Interface: Website Website: www.gvepinternational.orgsitesdefaultfilesmanualforsmeenergyfi Cost: Free UN Region: Eastern Africa Language: English The training manual is...

  6. UNIVERSIDAD SIMN BOLVAR MANUAL DE NORMAS Y PROCEDIMIENTOS

    E-Print Network [OSTI]

    Vásquez, Carlos

    UNIVERSIDAD SIMÓN BOLÍVAR SECRETARÍA MANUAL DE NORMAS Y PROCEDIMIENTOS "NO RENOVACION DE CONTRATO BOLÍVAR SECRETARÍA MANUAL DE NORMAS Y PROCEDIMIENTOS "NO RENOVACION DE CONTRATO DEL PERSONAL ACADÉMICO gestión eficaz y eficiente del proceso. I.2. Alcance Este manual va dirigido a todas las Unidades

  7. Radiation Safety Manual Dec 2012 Page 1 RADIATION SAFETY

    E-Print Network [OSTI]

    Grishok, Alla

    of External and Internal Doses E. Reports and Notices to Workers Chapter VII: Radiation ProtectionRadiation Safety Manual ­ Dec 2012 Page 1 RADIATION SAFETY MANUAL For Columbia University NewYork-Presbyterian Hospital New York State Psychiatric Institute Barnard College December 2012 #12;Radiation Safety Manual

  8. Advancing Toward Test Automation through Effective Manual Testing

    E-Print Network [OSTI]

    . This paper will walk through a best practice scenario for using Manual Tester to more naturally organize test Automation through Effective Manual Testing Bob Levy, Lead Product Manager ­ Functional Test Dennis ElenburgAdvancing Toward Test Automation through Effective Manual Testing May 2005 Advancing Toward Test

  9. LESSONS LEARNED AND BEST PRACTICES DATABASE USER MANUAL

    E-Print Network [OSTI]

    LESSONS LEARNED AND BEST PRACTICES DATABASE USER MANUAL OIA-OCA-0002, Rev. 0 Effective Date: June Lessons Learned and Best Practices Database User Manual RECORD OF REVISION Revision Number Date Approved.............................................................. 26 #12;OIA-OCA-0002, Rev. 0 Page 4 of 26 Lessons Learned and Best Practices Database User Manual 1

  10. A Provenance Model for Manually Curated Data Peter Buneman1

    E-Print Network [OSTI]

    Cheney, James

    are often absent, incomplete or ad hoc, often despite curators' best efforts. Also, manually-managedA Provenance Model for Manually Curated Data Peter Buneman1 , Adriane Chapman2 , James Cheney1- grating various existing data sources "by hand", that is, by manually en- tering or copying data from

  11. A Provenance Model for Manually Curated Data Peter Buneman1

    E-Print Network [OSTI]

    Michigan, University of

    , often despite curators' best efforts. Also, manually-managed provenance records are at higher riskA Provenance Model for Manually Curated Data Peter Buneman1 , Adriane Chapman2 , James Cheney1- grating various existing data sources "by hand", that is, by manually en- tering or copying data from

  12. Waste classification sampling plan

    SciTech Connect (OSTI)

    Landsman, S.D.

    1998-05-27T23:59:59.000Z

    The purpose of this sampling is to explain the method used to collect and analyze data necessary to verify and/or determine the radionuclide content of the B-Cell decontamination and decommissioning waste stream so that the correct waste classification for the waste stream can be made, and to collect samples for studies of decontamination methods that could be used to remove fixed contamination present on the waste. The scope of this plan is to establish the technical basis for collecting samples and compiling quantitative data on the radioactive constituents present in waste generated during deactivation activities in B-Cell. Sampling and radioisotopic analysis will be performed on the fixed layers of contamination present on structural material and internal surfaces of process piping and tanks. In addition, dose rate measurements on existing waste material will be performed to determine the fraction of dose rate attributable to both removable and fixed contamination. Samples will also be collected to support studies of decontamination methods that are effective in removing the fixed contamination present on the waste. Sampling performed under this plan will meet criteria established in BNF-2596, Data Quality Objectives for the B-Cell Waste Stream Classification Sampling, J. M. Barnett, May 1998.

  13. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05T23:59:59.000Z

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Admin Chg 1 dated 9-1-09. Canceled by DOE O 205.1B.

  14. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05T23:59:59.000Z

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B.

  15. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05T23:59:59.000Z

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Does not cancel other directives. Canceled by DOE O 205.1B

  16. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-04-17T23:59:59.000Z

    This Manual supplements DOE O 471.2A, Information Security Program, and provides detailed requirements for the protection and control of classified matter. Cancels DOE M 471.2-1B except Chapter III paragraphs 1 and 2, and Chapter IV.

  17. Student Manual The Didactic Program in Dietetics

    E-Print Network [OSTI]

    Goodman, Robert M.

    Student Manual for The Didactic Program in Dietetics at Rutgers University 1 #12;School Sciences http://nutrition.rutgers.edu Director, Didactic Program in Dietetics..............Barbara L;Table of Contents History of Didactic Program in Dietetics at Rutgers University......................4

  18. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-03-19T23:59:59.000Z

    This Manual supplements DOE O 231.1A and provides detailed requirements for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. Cancels DOE M 231.1-1, DOE N 231.1.

  19. Environmental Compliance Audit & Assessment Program Manual

    E-Print Network [OSTI]

    LBNL-1636E Environmental Compliance Audit & Assessment Program Manual Prepared by: Environment Berkeley National Laboratory Berkeley, CA 94720 This work was supported by the U.S. Department of Energy, neither the United States Government nor any agency thereof, nor The Regents of the University

  20. Nevada Test Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers' Council Nevada Test Site

    2010-02-09T23:59:59.000Z

    This document supersedes DOE/NV/25946--801, “Nevada Test Site Radiological Control Manual,” Revision 0 issued in October 2009. Brief Description of Revision: A minor revision to correct oversights made during revision to incorporate the 10 CFR 835 Update; and for use as a reference document for Tenant Organization Radiological Protection Programs.

  1. Nevada Test Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers' Council - Nevada Test Site

    2009-10-01T23:59:59.000Z

    This document supersedes DOE/NV/11718--079, “NV/YMP Radiological Control Manual,” Revision 5 issued in November 2004. Brief Description of Revision: A complete revision to reflect the recent changes in compliance requirements with 10 CFR 835, and for use as a reference document for Tenant Organization Radiological Protection Programs.

  2. Home Inventory User Manual About Home Inventory

    E-Print Network [OSTI]

    Wolfgang, Paul

    Home Inventory User Manual About Home Inventory The HomeInventory Project consists of a customized. With two types of roles, Users and Administrators, clients logged into the HomeInventory have access to a variety of commands. HomeInventory stores each user's items safely and privately, without worry

  3. Void Fraction Instrument operation and maintenance manual

    SciTech Connect (OSTI)

    Borgonovi, G.; Stokes, T.I.; Pearce, K.L.; Martin, J.D.; Gimera, M.; Graves, D.B.

    1994-09-01T23:59:59.000Z

    This Operations and Maintenance Manual (O&MM) addresses riser installation, equipment and personnel hazards, operating instructions, calibration, maintenance, removal, and other pertinent information necessary to safely operate and store the Void Fraction Instrument. Final decontamination and decommissioning of the Void Fraction Instrument are not covered in this document.

  4. The Psychology Clinic Manual of Procedures and

    E-Print Network [OSTI]

    Zhang, Yuanlin

    and Maintenance of Test Security 10.6 Obtaining Assessment Materials 10.7 Standard Assessment Protocol 10.8 CourseTEXAS TECH UNIVERSITY The Psychology Clinic Manual of Procedures and Requirements FALL 2013 Edition Statement 1.3 Faculty and Staff 1.4 Contact Information 1.5 Hours of Operation 1.6 Parking 1.7 Clinic

  5. SAFETY MANAGEMENT MANUAL OSU SHIP OPERATIONS

    E-Print Network [OSTI]

    Kurapov, Alexander

    overboarding operations on the vessel. 7.16.2 Scope This procedure covers the design, installation, maintenance.16.1 Purpose The purpose of this procedure is to set forth standards to ensure safe overboarding equipment on RSAFETY MANAGEMENT MANUAL OSU SHIP OPERATIONS 7.16 OVERBOARDING EQUIPMENT Originator: Approved By

  6. DOE Cooperative Research and Development Agreements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-12T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 483.1, DOE Cooperative Research and Development Agreements, dated 1-12-01, which establishes requirements for the performance of technology transfer through the use of Cooperative Research and Development Agreements (CRADAs). Canceled by DOE O 483.1A.

  7. NEW MEXICO STATE UNIVERSITY POLICY MANUAL

    E-Print Network [OSTI]

    Nishiguchi, Michele

    NEW MEXICO STATE UNIVERSITY POLICY MANUAL As Modified by the Board of Regents 03.10.14 #12;TABLE..............................................................................................................................................................A #12;Introduction New Mexico State University was founded in 1888 as Las Cruces College as the New Mexico College of Agriculture and Mechanic Arts, the first degree granting institution

  8. National Radiobiology Archives Distributed Access user's manual

    SciTech Connect (OSTI)

    Watson, C.; Smith, S. (Pacific Northwest Lab., Richland, WA (United States)); Prather, J. (Linfield Coll., McMinnville, OR (United States))

    1991-11-01T23:59:59.000Z

    This User's Manual describes installation and use of the National Radiobiology Archives (NRA) Distributed Access package. The package consists of a distributed subset of information representative of the NRA databases and database access software which provide an introduction to the scope and style of the NRA Information Systems.

  9. POLICY AND PROCEDURE MANUAL DENTAL HYGIENE STUDENT

    E-Print Network [OSTI]

    Nickrent, Daniel L.

    Page | 1 POLICY AND PROCEDURE MANUAL FOR THE DENTAL HYGIENE STUDENT DENTAL HYGIENE PROGRAM SCHOOL for the Dental Hygiene Student." The contents have been explained to me, and I have been given the opportunity to abide by the requirements of this document as long as I remain a Dental Hygiene Student at Southern

  10. CMA Operating Manual: Canon Mask Aligner Introduction

    E-Print Network [OSTI]

    Yoo, S. J. Ben

    CMA Operating Manual: Canon Mask Aligner Introduction Use the Canon PLA-501F Mask Aligner (See Fig: Dan Haskell, 1125 Kemper Hall Corey Wolin, 1125 Kemper Hall Lab Manager Pre-operational Checklist Before you enter the cleanroom: 1. Have you arranged training from the superuser or lab manager

  11. BEST MANAGEMENT PRACTICES & GUIDANCE MANUAL: DESERT

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION BEST MANAGEMENT PRACTICES & GUIDANCE MANUAL: DESERT RENEWABLE ENERGY SOUTHWEST REGION #12;Draft BMPs and Guidance October 5, 2009 DISCLAIMER Best Management Practices & Guidance Eugenia Laychak Mignon Marks James W. Reede, Jr., Ed. D. Paul Richins Authors Roger Johnson Manager

  12. Audit Manual release 3.0

    SciTech Connect (OSTI)

    Not Available

    1993-12-01T23:59:59.000Z

    This manual consolidates into one document the policies, procedures, standards, technical guidance and other techniques to be followed by the Assistant Inspector General for Audits and staff in planning and conducting audit work within DOE and in preparing related reports on behalf of the Office of Inspector General.

  13. Residency Manual Department of Obstetrics and Gynecology

    E-Print Network [OSTI]

    Shihadeh, Alan

    Residency Manual Department of Obstetrics and Gynecology American University of Beirut Medical experience and the opportunity to make some lifelong friends. From you, we expect your best efforts and your hardest work. By the end of your residency: You will have begun to understand what it means to practice

  14. Grants Manual Vanderbilt University School of Nursing

    E-Print Network [OSTI]

    Simaan, Nabil

    1 Grants Manual Vanderbilt University School of Nursing March 19, 2007 General Guidelines and expensive resources. Ensuring the best possible quality of each submission will reduce the costs associated Manager (GM) and Research Team Leader to discuss the budget, space and equipment needs, and research

  15. Dartmouth College Employment Policies and Procedures Manual

    E-Print Network [OSTI]

    Myers, Lawrence C.

    Dartmouth College Employment Policies and Procedures Manual Policy last updated: Dec 1, 2006 Employment of Minors Applies to: All current and prospective employees under the age of 18 Policy Statement: The College follows state and federal laws governing the employment of minors. Per New Hampshire law, children

  16. ISIS User Manual for Departmental, School and

    E-Print Network [OSTI]

    Shull, Kenneth R.

    ISIS User Manual for Departmental, School and University Administrator ISIS (pronounced -ss) is Northwestern University's Integrated Safety Information System. ISIS is the on-line web application by which PIs submit applications and registrations for review. ISIS also builds a laboratory's Safety Profile

  17. SPNP Users Manual Version 4.0

    E-Print Network [OSTI]

    Chen, Ing-Ray

    This manual1 describes Version 4.0 of SPNP, running under the UNIXsystemon a wide array of platforms VAX, Sun 3 and 4, Convex, Gould, NeXT, CRAY, AIX system RS 6000, OS 2 system PS 2, and VMS system VAX

  18. Environmental Measurements Laboratory (EML) procedures manual

    SciTech Connect (OSTI)

    Chieco, N.A.; Bogen, D.C.; Knutson, E.O. (eds.)

    1990-11-01T23:59:59.000Z

    Volume 1 of this manual documents the procedures and existing technology that are currently used by the Environmental Measurements Laboratory. A section devoted to quality assurance has been included. These procedures have been updated and revised and new procedures have been added. They include: sampling; radiation measurements; analytical chemistry; radionuclide data; special facilities; and specifications. 228 refs., 62 figs., 37 tabs. (FL)

  19. UC Davis Academic Personnel Manual Recruitment

    E-Print Network [OSTI]

    Islam, M. Saif

    UC Davis Academic Personnel Manual Recruitment UCD Appendix III-A Date: 6/22/99 Supersedes: 6/12/95 Responsible Department: Academic Personnel Source Document: UC APM-550, APM-560, and APM-561 1 of 4 Exhibit A. Household goods--articles used for maintaining a household (e.g., appliances, furniture, artwork or other

  20. Business Practice Manual for Definitions & Acronyms

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    Janaury 21, 2011 #12;CAISO Business Practice Manual BPM for Definitions & Acronyms Version 76 Last Revised: March 31, 2009 BPM Owner: Mike Dozier BPM Owner's Title: Senior Counsel Revision History Version Date Description 2 2009-12-18 Incorporating payment acceleration language submitted in BPM PRR 122

  1. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-10-18T23:59:59.000Z

    This Manual is a mechanism for implementing the Department's guiding principles established in DOE P 450.4 and the safety management functions outlined in DOE P 411.1 Cancels DOE M 411.1-1. Canceled by DOE M 411.1-1B.

  2. Y AND RELIABILITY: LOGO MANUAL COLOR SCHEME

    E-Print Network [OSTI]

    Bordenstein, Seth

    AND RELIABILITY: LOGO MANUAL COLOR SCHEME TYPOGRAPHY RECOMMENDED DISPLAY SPACE PMS 131C PMS COOL GRAY 11C VERSION HORIZONTAL 1J COLOR SCHEME R=203 G=163 B=57 C=21 M=34 Y=93 K=2 20,0 @Me Nas $10M in equipment Machine shop equipped conference facility All-purpose machine shop Skilled engineering staff

  3. UNDERGRADUATE STUDENT MANUAL Department of Mechanical Engineering

    E-Print Network [OSTI]

    Carpick, Robert W.

    and Applied Mechanics? Mechanical engineering and applied mechanics is the study of energy conversion, forces or more areas in mechanical engineering such as computer-aided-design and manufacturing (CAD/CAM), energyUNDERGRADUATE STUDENT MANUAL Department of Mechanical Engineering and Applied Mechanics University

  4. UNDERGRADUATE STUDENT MANUAL Department of Mechanical Engineering

    E-Print Network [OSTI]

    Carpick, Robert W.

    engineering (for example, computer-aided-design and manufacturing (CAD/CAM), energy engineering, mechanicalUNDERGRADUATE STUDENT MANUAL Department of Mechanical Engineering and Applied Mechanics University of Pennsylvania September 2009 www.me.upenn.edu #12;2 TABLE OF CONTENTS What is Mechanical Engineering and Applied

  5. TESC Farmhouse Biodiesel Project Processor Manual

    E-Print Network [OSTI]

    1 TESC Farmhouse Biodiesel Project Processor Manual #12;2 Thank you (in no particular order) to: David Rack, Sam Stout, and Kolby Bray-Hoagland for starting the Evergreen Biodiesel Project; our faculty Sara Keehfuss, Burke Anderson, Brodie Pettit (the Biodiesel Buccaneers) and Andrew York

  6. SAFETY MANAGEMENT MANUAL OSU SHIP OPERATIONS

    E-Print Network [OSTI]

    Kurapov, Alexander

    approved personal flotation devices appropriate to the prevailing conditions, hard hats, closed footwearSAFETY MANAGEMENT MANUAL OSU SHIP OPERATIONS 7.20 PERSONAL PROTECTIVE EQUIPMENT Originator of 2 7.20.1 Purpose The purpose of this procedure is to establish guidelines for the use of personal

  7. PROPERTY MANUAL Berkeley Laboratory Property Management

    E-Print Network [OSTI]

    Knowles, David William

    of Energy (DOE). The Property Management charter ensures the efficient and effective protection and controlPROPERTY MANUAL Issued by Berkeley Laboratory Property Management Lawrence Berkeley National of Property Management Policies · I. Parties and Organizations Responsible for Property · II. Acquiring

  8. NEW MEXICO STATE UNIVERSITY POLICY MANUAL

    E-Print Network [OSTI]

    Johnson, Eric E.

    NEW MEXICO STATE UNIVERSITY POLICY MANUAL As Modified by the Board of Regents 03.14.11 #12;TABLE...........................................................................................................................................................A-1 #12;Introduction and Mission Statement Introduction New Mexico State University was founded academic year, the college became known as the New Mexico College of Agriculture and Mechanic Arts

  9. Clinical Compliance Manual This manual was developed to guide students, staff and faculty through the Clinical Compliance

    E-Print Network [OSTI]

    Ward, Karen

    mandates and thus responsive to research regarding the best practices in the profession, they are subjectClinical Compliance Manual This manual was developed to guide students, staff and faculty through in this manual is to provide the reader with a comprehensible view of the Clinical Compliance Office, its

  10. DOE explosives safety manual. Revision 7

    SciTech Connect (OSTI)

    Not Available

    1994-08-01T23:59:59.000Z

    This manual prescribes the Department of Energy (DOE) safety rules used to implement the DOE safety policy for operations involving explosives. This manual is applicable to all DOE facilities engaged in operations of development, manufacturing, handling, storage, transportation, processing, or testing of explosives, pyrotechnics and propellants, or assemblies containing these materials. The standards of this manual deal with the operations involving explosives, pyrotechnics and propellants, and the safe management of such operations. The design of all new explosives facilities shall conform to the requirements established in this manual and implemented in DOE 6430.1A, ``General Design Criteria Manual.`` It is not intended that existing physical facilities be changed arbitrarily to comply with these provisions, except as required by law. Existing facilities that do not comply with these standards may continue to be used for the balance of their functional life, as long as the current operation presents no significantly greater risk than that assumed when the facility was originally designed and it can be demonstrated clearly that a modification to bring the facility into compliance is not feasible. However, in the case of a major renovation, the facility must be brought into compliance with current standards. The standards are presented as either mandatory or advisory. Mandatory standards, denoted by the words ``shall,`` ``must,`` or ``will,`` are requirements that must be followed unless written authority for deviation is granted as an exemption by the DOE. Advisory standards denoted by ``should`` or ``may`` are standards that may be deviated from with a waiver granted by facility management.

  11. Incremental Accelerated Gradient Methods for SVM Classification ...

    E-Print Network [OSTI]

    2013-05-02T23:59:59.000Z

    SVM Classification: Study of the Constrained ... Vector Machines (SVM) for online classification tasks. ...... A Library for Support Vector Machines [8]. 11.

  12. Benefits Summary - Temporary Job Classification | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Temporary Job Classification Download a summary of benefits offered to employees in the temporary job classification (at least 6 months term and 20 hoursweek). 2015 Long Term...

  13. Data:95961551-901e-4ce6-9462-403c0265d7e7 | Open Energy Information

    Open Energy Info (EERE)

    establishment as of January 1, 2010 where the existing establishment is classified in codes 7373 and 7374 by the Standard Industrial Classification Manual, published by the...

  14. Data:7914c15b-f856-4f47-ade7-878dc0aa5904 | Open Energy Information

    Open Energy Info (EERE)

    Industrial Classification Manual, 1957 or later version, published by the Bureau of Budget, United States Government, and where more than 50% of the electric consumption of such...

  15. Data:7646e475-e439-4d93-97bf-d5842960511b | Open Energy Information

    Open Energy Info (EERE)

    Industrial Classification Manual, 1957 or later version, published by the Bureau of Budget, United States Government, and where more than 50% of the electric consumption of such...

  16. Data:Fe92ef55-86a9-497c-aebd-4095920584b1 | Open Energy Information

    Open Energy Info (EERE)

    Industrial Classification Manual, 1957 or later version, published by the Bureau of Budget, United States Government, and where more than 50% of the electric consumption of such...

  17. Data:04aef517-3b03-475f-adc4-95227acf712f | Open Energy Information

    Open Energy Info (EERE)

    Industrial Classification Manual of the United States Office of Management and Budget, 1987 Edition ("SIC Codes"). Pursuant to the 1993 statutory change, the applicable...

  18. Data:C5bec713-3c5b-4971-86ea-84b6b069c473 | Open Energy Information

    Open Energy Info (EERE)

    Industrial Classification Manual, 1957 or later version, published by the Bureau of Budget, United States Government, and where more than 50% of the electric consumption of such...

  19. Data:4b6cb0b3-d888-4150-9cbc-89fa200ab6d1 | Open Energy Information

    Open Energy Info (EERE)

    Industrial Classification Manual, 1957 or later version, published by the Bureau of Budget, United States Government, and where more than 50% of the electric consumption of such...

  20. Burning Down the Shelf: Standardized Classification, Folksonomies, and Ontological Politics

    E-Print Network [OSTI]

    Lau, Andrew J.

    2008-01-01T23:59:59.000Z

    of Dewey Decimal Classification (DDC), Library of Congressstudies in critical classification. Library Resources and

  1. US Department of Energy radiological control manual. Revision 1

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    This manual establishes practices for the conduct of Department of Energy radiological control activities. The Manual states DOE`s positions and views on the best courses of action currently available in the area of radiological controls. Accordingly, the provisions in the Manual should be viewed by contractors as an acceptable technique, method or solution for fulfilling their duties and responsibilities. This Manual shall be used by DOE in evaluating the performance of its contractors. This Manual is not a substitute for Regulations; it is intended to be consistent with all relevant statutory and regulatory requirements and shall be revised whenever necessary to ensure such consistency. Some of the Manual provisions, however, challenge the user to go well beyond minimum requirements. Following the course of action delineated in the Manual will result in achieving and surpassing related statutory or regulatory requirements.

  2. MIT and Automotive Industries MIT Industry Brief

    E-Print Network [OSTI]

    Ceder, Gerbrand

    MIT and Automotive Industries MIT Industry Brief MIT's Industrial Liaison Program (ILP) can bring@ilp.mit.edu, or visit http://ilp-www.mit.edu. MIT and Automotive Industries The Massachusetts Institute of Technology (MIT) is a leading center of research and education on topics important to the automotive industry

  3. Profile of the rubber and plastics industry. EPA Office of Compliance sector notebook project

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    The rubber and miscellaneous plastics products industry, as defined by the Standard Industrial Classification (SIC) code 30, includes establishments that manufacture products from plastic resins, natural and synthetic rubber, reclaimed rubber, futta percha, balata, and gutta siak. The second section provides background information on the size, geographic distribution, employment, production, sales, and economic condition of the Rubber and Plastics Products industry. The type of facilities described within the document are also described in terms of their Standard Industrial Classification (SIC) codes. Additionally, this section contains a list of the largest companies in terms of sales.

  4. Industrial Waste Landfill IV upgrade package

    SciTech Connect (OSTI)

    Not Available

    1994-03-29T23:59:59.000Z

    The Y-12 Plant, K-25 Site, and ORNL are managed by DOE`s Operating Contractor (OC), Martin Marietta Energy Systems, Inc. (Energy Systems) for DOE. Operation associated with the facilities by the Operating Contractor and subcontractors, DOE contractors and the DOE Federal Building result in the generation of industrial solid wastes as well as construction/demolition wastes. Due to the waste streams mentioned, the Y-12 Industrial Waste Landfill IV (IWLF-IV) was developed for the disposal of solid industrial waste in accordance to Rule 1200-1-7, Regulations Governing Solid Waste Processing and Disposal in Tennessee. This revised operating document is a part of a request for modification to the existing Y-12 IWLF-IV to comply with revised regulation (Rule Chapters 1200-1-7-.01 through 1200-1-7-.08) in order to provide future disposal space for the ORR, Subcontractors, and the DOE Federal Building. This revised operating manual also reflects approved modifications that have been made over the years since the original landfill permit approval. The drawings referred to in this manual are included in Drawings section of the package. IWLF-IV is a Tennessee Department of Environmental and Conservation/Division of Solid Waste Management (TDEC/DSWM) Class 11 disposal unit.

  5. Revegetation manual for the environmental restoration contractor

    SciTech Connect (OSTI)

    McLendon, T.; Redente, E.F.

    1997-02-01T23:59:59.000Z

    The purpose of this manual is to provide guidance and general guidelines for the revegetation of remediation waste sites and other disturbed areas on the Hanford Site. Specific revegetation plans will be developed using guidance from this manual. Locations, resources, and funding will dictate the specific revegetation design at each disturbed area. Disturbances have occurred to some of the ecological communities of the Hanford Site. Many of these disturbances are the result of operations of the Hanford Site, including Comprehensive Environmental Response, Compensation, and Liability Act of 1980 waste sites on small portions of the Hanford Site. There were, however, extensive disturbances to the native vegetation prior to operations of the facility. These resulted from cultivation, grazing, fire, and the introduction of exotics. Revegetation planning must take into account these early disturbances, as well as the later ones.

  6. Environment, Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-03-19T23:59:59.000Z

    This Manual supplements DOE O 231.1A and provides detailed requirement for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. The page change modifies policy previously established that requires recording and reporting occupational injuries and illnesses of subcontractors employees. Change 1 dated 9-9-04. Change 2 dated 6-12-07. Canceled by DOE O 231.1B

  7. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-01-28T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. (Paragraphs 2a, 2a(1), 2a(2), 2b, 2b(1), 2b(2), and 2i(3)(a) through 2i(3)(d) of Chapter II, and Appendix A canceled by DOE N 231.1; Chapter IV canceled by DOE O 470.2A.)

  8. DiMP Users Manual Yuichi Tazaki

    E-Print Network [OSTI]

    Tazaki, Yuichi

    DiMP Users Manual Yuichi Tazaki #12;#12;3 1 5 2 7 2.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 DiMP 9 3.11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 30 31 #12;#12;5 1 DiMP C++ DiMP #12;#12;7 2 2.1 DiMP doc lib .lib Base Springhead Base DiMP1 DiMP

  9. 1.MANUALE UTENTE 1.1 INTRODUZIONE

    E-Print Network [OSTI]

    Dezani-Ciancaglini, Mariangiola

    INDICE 1.MANUALE UTENTE 1.1 INTRODUZIONE 1.2 CREARE AUTOMI 1.2.1 CREARE STATI 1.2.2 AGGIUNGERE ARCHI 1.2.3 AGGIUNGERE ALFABETO 1.2.4 ELIMINARE STATI E TRANSIZIONI 1.3 FUNZIONALITA' OFFERTE DAL SISTEMA 1.3.1 TABELLA TRANSIZIONE 1.3.2 TIPO AUTOMA? 1.3.3 SIMULARE STRINGHE 1.3.4 GRAMMATICA REGOLARE

  10. Nevada National Security Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers’ Council

    2012-03-26T23:59:59.000Z

    This document supersedes DOE/NV/25946--801, 'Nevada Test Site Radiological Control Manual,' Revision 1 issued in February 2010. Brief Description of Revision: A complete revision to reflect a recent change in name for the NTS; changes in name for some tenant organizations; and to update references to current DOE policies, orders, and guidance documents. Article 237.2 was deleted. Appendix 3B was updated. Article 411.2 was modified. Article 422 was re-written to reflect the wording of DOE O 458.1. Article 431.6.d was modified. The glossary was updated. This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE) and the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations (CFR) Part 835, 'Occupational Radiation Protection.' Programs covered by this manual are located at the Nevada National Security Site (NNSS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Livermore, California; and Andrews Air Force Base, Maryland. In addition, fieldwork by NNSA/NSO at other locations is covered by this manual. Current activities at NNSS include operating low-level radioactive and mixed waste disposal facilities for United States defense-generated waste, assembly and execution of subcritical experiments, assembly/disassembly of special experiments, the storage and use of special nuclear materials, performing criticality experiments, emergency responder training, surface cleanup and site characterization of contaminated land areas, environmental activity by the University system, and nonnuclear test operations, such as controlled spills of hazardous materials at the Hazardous Materials Spill Center. Currently, the major potential for occupational radiation exposure is associated with the burial of low-level radioactive waste and the handling of radioactive sources. Remediation of contaminated land areas may also result in radiological exposures.

  11. HP-41CV applied drilling engineering manual

    SciTech Connect (OSTI)

    Chenevert, M.; Williams, F.; Hekimian, H.

    1983-01-01T23:59:59.000Z

    Contents of this manual are as follows: average diameter of an open hole; pump cycle, pump factor, and annulus capacity; drilling-time and penetration rate predictions; nozzle selection; direction well survey; viscosity of drilling fluids; barite requirements with solids dilution; solids analysis and recommended flow properties; evaluation of hydrocyclones; frictional pressure loss; surge and swab pressures; pressure and average density of a gas column; cement additive requirements; kick tolerance, severity, length and density; and pump pressure schedule for well control operations.

  12. UMTRA Project document control system manual

    SciTech Connect (OSTI)

    Not Available

    1994-09-01T23:59:59.000Z

    This manual defines the Project Document Control System (PDCS) operated by the US DOE Uranium Mill tailings Remedial Action (UMTRA) project Office. The purpose of the PDCS is to provide an active and continuing program for acquiring, controlling, retaining, retrieving, retiring and disposing of all UMTRA Project documents. The PDCS also provides guidance and coordination in transferring documents by various UMTRA Projection document control centers to a central location.

  13. On the algebraic classification of spacetimes

    E-Print Network [OSTI]

    V. Pravda

    2005-12-15T23:59:59.000Z

    We briefly overview the Petrov classification in four dimensions and its generalization to higher dimensions.

  14. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users The

  15. Industry @ ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf SmartIndustrial Users

  16. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFP »summerlectures [ICO]default Sign InIndustrial

  17. Art History Adjunct Manual Department of Art & Art History, Hunter College, CUNY Art History Adjunct Manual Department of Art & Art History, Hunter College, CUNY

    E-Print Network [OSTI]

    Qiu, Weigang

    Art History Adjunct Manual Manual Department of Art & Art History and in your classes may be artists or would-be artists, practicing in a wide variety

  18. MultiCriteria Clustering & Classification

    E-Print Network [OSTI]

    Libre de Bruxelles, Université

    An Extension of the K-Means' algorithm MultiCriteria Ordered Clustering 6 MCDA Classification : Sorting MCDACriteria Comparison : motivation A MCDA approach for grouping problems 5 MCDA Clustering Multicriteria Clustering

  19. Lecture Ch. 8 Cloud Classification

    E-Print Network [OSTI]

    Russell, Lynn

    clouds Middle clouds Grayish, block the sun, sometimes patchy Sharp outlines, rising, bright white1 Lecture Ch. 8 · Cloud Classification ­ Descriptive approach to clouds · Drop Growth and Precipitation Processes ­ Microphysical characterization of clouds · Complex (i.e. Real) Clouds ­ Examples

  20. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Endres. William J.

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere to current uniform

  1. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month/40 and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

  2. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month and ice, applying sand and salt, and removing debris. Adhere to current department uniform policy supervision may be exercised over seasonal/temporary university employees and student assistants

  3. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 mos and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

  4. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month/20 hours and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

  5. Hierarchical classification of modulation signals

    E-Print Network [OSTI]

    Kim, Nam Jin

    2002-01-01T23:59:59.000Z

    This thesis addresses the problem of classifying both analog and digital modulation signals using different kinds of classifiers. The classification of modulation signals has both civilian and military applications. A total of 31 statistical signal...

  6. Storm-water management for industrial activities. Developing pollution prevention plans and best management practices

    SciTech Connect (OSTI)

    Not Available

    1992-09-01T23:59:59.000Z

    The manual provides industrial facilities with comprehensive guidance on the development of storm water pollution prevention plans and identification of appropriate Best Management Practices (BMPs). It provides technical assistance and support to all facilities subject to pollution prevention requirements established under National Pollutant Discharge Elimination System (NPDES) permits for storm water point source discharges. EPA's storm water program significantly expands the scope and application of the existing NPDES permit system for municipal and industrial process wastewater discharges. It emphasizes pollution prevention and reflects a heavy reliance on BMPs to reduce pollutant loadings and improve water quality. The manual provides essential guidance in both of these areas.

  7. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  8. Industrial Decision Making 

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01T23:59:59.000Z

    and industrial investment decision-making. The paper will also address several important questions: • Why has industrial investment declined? • What is the outlook for industrial investment? • How can programs engage industry for future opportunities?...

  9. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Endres. William J.

    , operating and maintenance instructions, and procedure manuals. Ability to complete routine reports. Ability standard bulk mail, process and distribute incoming/outgoing mail and shipments in a timely, efficient. Sort and dispatch bulk mailings for university departments and organizations. Operate mailing equipment

  10. Uranium hexafluoride: A manual of good handling practices. Revision 7

    SciTech Connect (OSTI)

    NONE

    1995-01-01T23:59:59.000Z

    The United States Enrichment Corporation (USEC) is continuing the policy of the US Department of Energy (DOE) and its predecessor agencies in sharing with the nuclear industry their experience in the area of uranium hexafluoride (UF{sub 6}) shipping containers and handling procedures. The USEC has reviewed Revision 6 or ORO-651 and is issuing this new edition to assure that the document includes the most recent information on UF{sub 6} handling procedures and reflects the policies of the USEC. This manual updates the material contained in earlier issues. It covers the essential aspects of UF{sub 6} handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF{sub 6} are also described. The procedures and systems described for safe handling of UF{sub 6} presented in this document have been developed and evaluated during more than 40 years of handling vast quantities of UF{sub 6}. With proper consideration for its nuclear properties, UF{sub 6} may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical.

  11. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  12. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  13. Packaging and Transfer of Materials of National Security Interest Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-09-29T23:59:59.000Z

    The purpose of this Technical Manual is to establish requirements for operational safety controls for onsite operations. This Technical Manual provides Department of Energy (DOE) technical safety requirements and policy objectives for development of an onsite packaging and transfer program, pursuant to DOE O 461.1; the DOE contractor must document this program in its onsite packaging and transfer manual/procedures. Does not cancel other directives.

  14. Battery Calendar Life Estimator Manual Modeling and Simulation

    SciTech Connect (OSTI)

    Jon P. Christophersen; Ira Bloom; Ed Thomas; Vince Battaglia

    2012-10-01T23:59:59.000Z

    The Battery Life Estimator (BLE) Manual has been prepared to assist developers in their efforts to estimate the calendar life of advanced batteries for automotive applications. Testing requirements and procedures are defined by the various manuals previously published under the United States Advanced Battery Consortium (USABC). The purpose of this manual is to describe and standardize a method for estimating calendar life based on statistical models and degradation data acquired from typical USABC battery testing.

  15. Manual for Identifying and Protecting Official Use Only Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09T23:59:59.000Z

    The manual provides detailed requirements to supplement DOE O 471.3. Admin Chg 1 dated 1-13-11. No cancellation.

  16. Radiation Protection Instrument Manual, Revision 1, PNL-MA-562

    SciTech Connect (OSTI)

    Johnson, Michelle Lynn

    2009-09-23T23:59:59.000Z

    PNL-MA-562 This manual provides specific information for operating and using portable radiological monitoring instruments available for use on the Hanford Site.

  17. accident prevention manual: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wu, Mingshen 9 Chest--Manual Defrost Models Biology and Medicine Websites Summary: old refrigerator or freezer, please follow the instructions below to help prevent accidents....

  18. Rhode Island Stormwater Design and Installation Standards Manual (Rhode Island)

    Broader source: Energy.gov [DOE]

    Rhode Island's stormwater design and installation standards manual has been developed to describe mandatory and suggested stormwater design and performance criteria for applicants to the Department...

  19. adt reference manual: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LLSIM Reference Manual MIT - DSpace Summary: A program that simulates a Digital Equipment Corporation PDP-11 computer and many of its peripherals on the AI Laboratory Time Sharing...

  20. Microfluidic Facility, Harvard Medical School UVO-42 Operation Manual

    E-Print Network [OSTI]

    Paulsson, Johan

    Microfluidic Facility, Harvard Medical School UVO-42 Operation Manual 1. Load the substrate then be opened the tray removed, and the parts unloaded. Calixto Saenz, Microfluidic Facility

  1. Adaptation to Climate Variability and Change: A Guidance Manual...

    Open Energy Info (EERE)

    to Climate Variability and Change: A Guidance Manual for Development Planning Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Adaptation to Climate Variability and...

  2. assessment technical manual: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    properpurgingprocedures (Appendix:Figure3). 3 Yoo, S. J. Ben 3 Environmental Compliance Audit & Assessment Program Manual University of California eScholarship Repository Summary:...

  3. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-07-14T23:59:59.000Z

    This Manual supplements DOE O 471.2A, Information Security Program, dated 3-27-97, and provides detailed requirements for the protection and control of classified matter. Cancels DOE M 471.2-1B, dated 1-6-99, except Chapter III paragraphs 1 and 2 and Chapter IV. DOE M 471.2-1B Chapter IV was canceled by DOE O 471.4, Incidents of Security Concern, dated 3-17-04. Change 1, dated 7-14-2004, modifies requirements in Chapter II, paragraph 8c. Extended until 5-11-06 by DOE N 251.63, dated 5-11-05.

  4. Environment, Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-09-09T23:59:59.000Z

    This Manual supplements DOE O 231.1A and provides detailed requirement for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. The Page Change clarifies responsibilities pertaining to occupational injury and illness recordkeeping and recording; requires quarterly reconciliation of occupational injury and illness data; and provides clarification on data elements that must be reported and reconciled with local data records. Cancels DOE M 231.1-1c1, DOE N 231.1. Chg 1, 9-9-04.

  5. Torque limited drive for manual valves

    DOE Patents [OSTI]

    Elliott, Philip G. (Metropolis, IL); Underwood, Daniel E. (Paducah, KY)

    1989-01-01T23:59:59.000Z

    The present invention is directed to a torque-limiting handwheel device for preventing manual valves from being damaged due to the application of excessive torque during the opening or closing operation of the valves. Torque can only be applied when ridges in the handwheel assembly engage in channels machined in the face of the baseplate. The amount of torque required for disengagement of the ridges from the channels is determined by the force exerted by various Bellville springs and the inclination of the side faces of the channels.

  6. HOPSPACK 2.0 user manual.

    SciTech Connect (OSTI)

    Plantenga, Todd D.

    2009-09-01T23:59:59.000Z

    HOPSPACK (Hybrid Optimization Parallel Search PACKage) solves derivative-free optimization problems using an open source, C++ software framework. The framework enables parallel operation using MPI or multithreading, and allows multiple solvers to run simultaneously and interact to find solution points. HOPSPACK comes with an asynchronous pattern search solver that handles general optimization problems with linear and nonlinear constraints, and continuous and integer-valued variables. This user manual explains how to install and use HOPSPACK to solve problems, and how to create custom solvers within the framework.

  7. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-01-06T23:59:59.000Z

    Provides detailed requirements for the protection and control of classified matter which supplement DOE O 471.2A. Extended until 5-11-06 by DOE N 251.63, dated 5-11-05. This manual has been canceled by DOE M 471.2-1C except Chapter III paragraphs 1 and 2, and Chapter IV. Chapter IV was canceled by DOE O 471.4, Incidents of Security Concern, dated 3/17/2004. Cancels DOE M 471.2-1A.

  8. UQTk version 2.0 user manual.

    SciTech Connect (OSTI)

    Debusschere, Bert J.; Sargsyan, Khachik; Safta, Cosmin

    2013-10-01T23:59:59.000Z

    The UQ Toolkit (UQTk) is a collection of libraries and tools for the quanti cation of uncer- tainty in numerical model predictions. Version 2.0 o ers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity anal- ysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

  9. K-edge densitometer (KED). User manual

    SciTech Connect (OSTI)

    Sprinkle, J.K.; Hansen, W.J.

    1993-02-11T23:59:59.000Z

    In 1979, a K-edge densitometer (KED) was installed by the Safeguards Assay group from Los Alamos National Laboratory in the PNC reprocessing plant at Tokai-mura, Japan. It uses an active nondestructive assay technique, KED, to measure the plutonium concentration of the product solution. The measurement uncertainty of an assay depends on the count time chosen, but can be 0.5% or better. The computer hardware and software were upgraded in 1992. This manual describes the operation of the instrument, with an emphasis on the user interface to the software.

  10. Hanford Hoisting and Rigging Manual - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm) Harmonic EngineHIVDecember 2013SeptemberAboutManual

  11. Caltrans Transportation Permits Manual | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomassSustainableCSL GasPermits Manual Jump to: navigation, search OpenEI Reference

  12. DOE Manual - Advisory Committee Management Program

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732 DOE F 243.2 Records Scheduling RequestEnergywith 17MANUAL

  13. Automated manual transmission mode selection controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (Whitmore Lake, MI)

    1999-11-09T23:59:59.000Z

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  14. Automated manual transmission shift sequence controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (Whitmore Lake, MI); Reed, Richard G. (Royal Oak, MI); Rausen, David J. (Denver, CO)

    2000-02-01T23:59:59.000Z

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both, an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  15. RADCAL Operations Manual Radiation Calibration Laboratory Protocol

    SciTech Connect (OSTI)

    Bogard, J.S.

    1998-12-01T23:59:59.000Z

    The Life Sciences Division (LSD) of Oak Ridge National Laboratory (ORNL) has a long record of radiation dosimetry research, primarily using the Health Physics Research Reactor (HPRR) and the Radiation Calibration Laboratory (RADCAL) in its Dosimetry Applications Research (DOSAR) Program. These facilities have been used by a broad segment of the research community to perform a variety of experiments in areas including, but not limited to, radiobiology, radiation dosimeter and instrumentation development and calibration, and the testing of materials in a variety of radiation environments. Operations of the HPRR were terminated in 1987 and the reactor was moved to storage at the Oak Ridge Y-12 Plant; however, RADCAL will continue to be operated in accordance with the guidelines of the National Institute of Standards and Technology (NIST) Secondary Calibration Laboratory program and will meet all requirements for testing dosimeters under the National Voluntary Laboratory Accreditation Program (NVLAP). This manual is to serve as the primary instruction and operation manual for the Oak Ridge National Laboratory's RADCAL facility. Its purpose is to (1) provide operating protocols for the RADCAL facility, (2) outline the organizational structure, (3) define the Quality Assurance Action Plan, and (4) describe all the procedures, operations, and responsibilities for the safe and proper operation of all routine aspects of the calibration facility.

  16. TAP 2, Performance-Based Training Manual

    SciTech Connect (OSTI)

    Not Available

    1991-07-01T23:59:59.000Z

    Training programs at DOE nuclear facilities should provide well- trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two comparison manuals provide additional information to assist contractors in their efforts to accredit training programs.

  17. Environmental Compliance Audit& Assessment Program Manual

    SciTech Connect (OSTI)

    Thorson, Patrick; Baskin, David; Borglin, Ned; Fox, Robert; Wahl, Linnea; Hatayama, Howard; Pauer, Ronald

    2009-03-13T23:59:59.000Z

    This document describes the elements, schedule, roles, and responsibilities of the Lawrence Berkeley National Laboratory (LBNL) Environmental Compliance Audit & Assessment Program (ECAAP). The ECAAP has been developed to meet the requirements of DOE Order 450.1A,1 and Executive Order 13423.2 These referenced Orders stipulate that government agencies must develop environmental compliance audit programs to monitor and improve compliance with environmental regulations. As stated specifically in the DOE Order, as a part of a DOE facility's Environmental Management System (EMS), 'An environmental compliance audit and review program that identifies compliance deficiencies and root causes of non-compliance' shall be developed and implemented. The ECAAP has also been developed to satisfy LBNL's institutional technical assurance assessment requirements promulgated in the Environment, Safety and Health (ES&H) Self-Assessment Program (LBNL/PUB-5344) and described by the ES&H Technical Assurance Program (TAP) Manual (LBNL/PUB-913E). The ES&H TAP Manual provides the framework for systematic reviews of ES&H programs with the intent to provide assurance that these programs comply with their guiding regulations, are effective, and are properly implemented. As required by the DOE and Executive Orders and by LBNL's TAP, the goal of the ECAAP is to identify environmental regulatory compliance deficiencies and to determine their respective causes. The ECAAP then provides a means of correcting any deficiencies identified, and leads to continually improving environmental compliance performance.

  18. Solar radiation data manual for buildings

    SciTech Connect (OSTI)

    Marion, W.; Wilcox, S.

    1995-09-01T23:59:59.000Z

    Architects and engineers use solar resource information to help design passive solar and daylighting features for buildings. Solar resource information includes data on how much solar radiation and illuminance are available for different window orientations, and how they vary. This manual provides solar radiation and illuminance values for a horizontal window and four vertical windows (facing north, east, south, and west) for 239 stations in the United States and its territories. The solar radiation values are monthly and yearly averages for the period of 1961--1990. Included are values showing the solar radiation incident on the window and the amount transmitted into the living space, with and without exterior shading of the window. Illuminance values are presented r average dismal profiles for 4 months of the year. In addition to the solar radiation and illuminance data, this manual contains tables listing climatic condition such as average temperature, average daily minimum and maximum temperature, record minimum and maxi mum temperature, average heating and cooling degree days, average humidity ratio, average wind speed, an average clearness index. The solar radiation, illuminance, and climatic data a presented in tables. Data for each station are presented on a single page, and the pages are arranged alphabetically by the state or territory two-letter abbreviation. Within a state or territory, the pages are arranged alp betically by city or island.

  19. UNIVERSIDAD SIMN BOLVAR MANUAL DE NORMAS Y PROCEDIMIENTOS

    E-Print Network [OSTI]

    Vásquez, Carlos

    UNIVERSIDAD SIMÓN BOLÍVAR SECRETARÍA MANUAL DE NORMAS Y PROCEDIMIENTOS "RENOVACION DE CONTRATO DEL SECRETARÍA MANUAL DE NORMAS Y PROCEDIMIENTOS "RENOVACION DE CONTRATO DEL PERSONAL ACADÉMICO (ADE Y ATI responsabilidad de las Unidades que intervienen, permitiendo lograr una gestión eficaz y eficiente del proceso. I

  20. Radiological Control Manual Environment, Safety, Health, and Quality Division

    E-Print Network [OSTI]

    Wechsler, Risa H.

    ............................................................................................................................................8 128 Facility Modifications and Radiological Design ConsiderationsRadiological Control Manual Environment, Safety, Health, and Quality Division SLAC-I-720-0A05Z-001 and published by ESHQ Publishing Document Title: Radiological Control Manual Original Publication Date: 1

  1. COLLECTIONS POLICY MANUAL Earth and Mineral Sciences Museum

    E-Print Network [OSTI]

    Maroncelli, Mark

    COLLECTIONS POLICY MANUAL Earth and Mineral Sciences Museum College of Earth and Mineral Sciences Manual for the Earth and Mineral Sciences Museum has been developed to standardize procedures and provide guidelines for handling collections. The policies outlined here were established by the EMS Museum Director

  2. User Manual for MissionLab version 7.0

    E-Print Network [OSTI]

    . Cameron Zhong Chen Yoichiro Endo William C. Halliburton Michael Kaess Zsolt Kira James B. Lee Douglas C Patrick Ulam Alan Wagner This manual was compiled by Yoichiro Endo. #12;iii Copyright 1994 - 2006 Georgia://www.cc.gatech.edu/ai/robot-lab/ July 12, 2006 #12;ii About This Manual Georgia Tech Mobile Robot Laboratory is directed by Ronald C

  3. UNIVERSITY OF CALIFORNIA, SAN FRANCISCO RADIATION SAFETY TRAINING MANUAL

    E-Print Network [OSTI]

    Lim, Wendell

    for the protection of personnel. #12;RADIATION SAFETY TRAINING MANUAL TABLE OF CONTENTS SECTION DESCRIPTION PAGE` #12;#12;UNIVERSITY OF CALIFORNIA, SAN FRANCISCO RADIATION SAFETY TRAINING MANUAL SEPTEMBER, 1996 This information is being provided in accordance with the following State requirements: CALIFORNIA RADIATION

  4. MANUAL FOR WEB-BASED TXDOT RIGID PAVEMENT Sureel Saraf

    E-Print Network [OSTI]

    Texas at Austin, University of

    0-5445-P2 MANUAL FOR WEB-BASED TXDOT RIGID PAVEMENT DATABASE Authors: Sureel Saraf Moon Won TxDOT Project 0-5445: Project Level Performance Database for Rigid Pavements in Texas SEPTEMBER 2007, REV. JULY-Based Information System for Rigid Pavements User's Manual Texas Department of Transportation July 9, 2009 #12

  5. Identification and Protection of Unclassified Controlled Nuclear Information Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30T23:59:59.000Z

    This Manual provides detailed requirements to supplement DOE O 471.1A, Identification and Protection of Unclassified Controlled Nuclear Information. Change 1, dated 10/23/01, was added to the Manual to clarify when and how encryption requirements for Unclassified Controlled Nuclear Information may be waived. Canceled by DOE O 471.1B.

  6. Manual annotation of the National Corpus of Polish with Anotatornia

    E-Print Network [OSTI]

    Przepiórkowski, Adam

    information introduced at these levels must be double-checked. The best practice in such cases is the "2Manual annotation of the National Corpus of Polish with Anotatornia Adam Przepiórkowski of this paper is to present the procedure of the manual annotation of a 1- million-word subcorpus

  7. ECU Physicians Group Practice Policy and Procedure Manual

    E-Print Network [OSTI]

    ECU Physicians Group Practice Policy and Procedure Manual Topic: HIV Antibody Testing # IM 13 Manual Topic: HIV Antibody Testing # IM 13 Section: 4 Section Name: Information Management Approval Date Section: 4 Section Name: Information Management Approval Date: 01/09/01 Medical Director Approval: Richard

  8. ECU Physicians Group Practice Policy and Procedure Manual

    E-Print Network [OSTI]

    ECU Physicians Group Practice Policy and Procedure Manual Topic: Advance Care Planning - #C31 Planning practices. IV. Procedure: A. The Social Work and Case Management Department will insure Group Practice Policy and Procedure Manual Topic: Advance Care Planning - #C31 Section No. 2 Section

  9. Tank waste remediation system process engineering instruction manual

    SciTech Connect (OSTI)

    ADAMS, M.R.

    1998-11-04T23:59:59.000Z

    The purpose of the Tank Waste Remediation System (TWRS) Process Engineering Instruction Manual is to provide guidance and direction to TWRS Process Engineering staff regarding conduct of business. The objective is to establish a disciplined and consistent approach to business such that the work processes within TWRS Process Engineering are safe, high quality, disciplined, efficient, and consistent with Lockheed Martin Hanford Corporation Policies and Procedures. The sections within this manual are of two types: for compliance and for guidance. For compliance sections are intended to be followed per-the-letter until such time as they are formally changed per Section 2.0 of this manual. For guidance sections are intended to be used by the staff for guidance in the conduct of work where technical judgment and discernment are required. The guidance sections shall also be changed per Section 2.0 of this manual. The required header for each manual section is illustrated in Section 2.0, Manual Change Control procedure. It is intended that this manual be used as a training and indoctrination resource for employees of the TWRS Process Engineering organization. The manual shall be required reading for all TWRS Process Engineering staff, matrixed, and subcontracted employees.

  10. Administrative Protocol Page 1 of 2 Nursing Practice Manual

    E-Print Network [OSTI]

    Oliver, Douglas L.

    for accuracy, with review or revision occurring every three years at a minimum. a. Nursing Practice Manual (NPM) clinical documents are reviewed by the Nursing Standards Committee b. Nursing Practice Manual (NPM modifications to documents are completed. a. NPM documents with updated review and/or revision dates

  11. Titanium Language Reference Manual Version 2.20

    E-Print Network [OSTI]

    California at Irvine, University of

    Titanium Language Reference Manual Version 2.20 P. N. Hilfinger (editor), Dan Bonachea, Kaushik Berkeley, California 94720 #12;Titanium Language Reference Manual Version 2.20 P. N. Hilfinger (editor, and Katherine Yelick August, 2006 #12;Abstract The Titanium language is a Java dialect for high

  12. DEPARTMENT OF RESIDENTIAL LIFE Residential Life Staff Manual.

    E-Print Network [OSTI]

    Missouri-Rolla, University of

    1 Appendix A DEPARTMENT OF RESIDENTIAL LIFE Residential Life Staff Manual. Residential Life Program Listing #12;2 MISSOURI S&T RESIDENTIAL LIFE DEPARTMENT Staff Resource Manual 2010--2012 Department of Residential Life Mission: To create educational environments emphasizing learning and development. Service

  13. ISI TechnicalManual ISI/TM-88-197

    E-Print Network [OSTI]

    Robins, Gabriel

    ISI TechnicalManual ISI/TM-88-197 February1988 University ofSouthern California Gabriel Robins %% ... ... .. The ISI Grapher Manual INFORMATION SCIENCES 213/822-1511 INSTITUTEJ f-"-676 292-t5466Admiralty Way. MONITORING ORGANIZATION REPORT NUMBER(S) ISI/TM-88-197 6a. NAME OF PERFORMING ORGANIZATION USC

  14. STI_Announcement _Web_Services_Manual_2.0.pdf | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    STIAnnouncement WebServicesManual2.0.pdf Document Info Available Downloads for this Document: applicationpdf icon STIAnnouncement WebServicesManual2.00...

  15. Deterministic Model for Acute Myelogenous Leukemia Classification

    E-Print Network [OSTI]

    Chronopoulos, Anthony T.

    Deterministic Model for Acute Myelogenous Leukemia Classification Monica Madhukar that the proposed system robustly segments and classifies Acute Myelogenous Leukemia based on complete microscopic/backup service to the physician Keywords- Classification; Segmentation; Acute Myelogenous leukemia; Feature

  16. Reflectance Function Approximation for Material Classification

    E-Print Network [OSTI]

    Dyer, Charles R.

    Reflectance Function Approximation for Material Classification Edward Wild CS 766 Final Project This report summarizes the results of a project to approximate reflectance functions and classify materials to classify materials. Classification algorithms are proposed to deal with unseen materials. Experimental

  17. Brain MRI Classification using the Expectation Maximization

    E-Print Network [OSTI]

    Chen, Tsuhan

    Brain MRI Classification using the Expectation Maximization made a brain magnetic resonance image (MRI) classification algorithm that uses a twostage applied to a set of normal brain MR images for further testing. We accomplished a working

  18. Maturing Software Engineering Knowledge through Classifications

    E-Print Network [OSTI]

    Basili, Victor R.

    Maturing Software Engineering Knowledge through Classifications: A Case Study on Unit Testing contribution to advancing knowledge in both science and engineering. It is a way of investigating Engineering knowledge, as classifications constitute an organized structure of knowledge items. Till date

  19. Battery Test Manual For Plug-In Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Jeffrey R. Belt

    2010-09-01T23:59:59.000Z

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.

  20. Battery Test Manual For Plug-In Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Jeffrey R. Belt

    2010-12-01T23:59:59.000Z

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.

  1. Comparison: Meningioma Classification using Wavelet Packets and Normal Texture based Classification

    E-Print Network [OSTI]

    Qureshi, Hammad

    Energy Based Classification Accuracy 0 20 40 60 80 100 120 F M P T Overall Meningiomas %Accuracy RawComparison: Meningioma Classification using Wavelet Packets and Normal Texture based Classification performed better were obtained from each · Classification using k-nn (leave one out). Introduction

  2. Optimization Online - Classification with Guaranteed Probability of ...

    E-Print Network [OSTI]

    Marco C. Campi

    2009-03-18T23:59:59.000Z

    Mar 18, 2009 ... Classification with Guaranteed Probability of Error. Marco C. ... Category 3: Applications -- Science and Engineering (Statistics ). Citation:.

  3. Multicriteria Inventory Classification Using A Genetic Algorithm

    E-Print Network [OSTI]

    Güvenir, H. Altay

    Multicriteria Inventory Classification Using A Genetic Algorithm H. Altay Guvenir a;1 , and Erdal. The new crossover technique is applied to the prob­ lem of multicriteria inventory classification. The results are compared with the classical inventory classification technique using Analytical Hierarchy

  4. Hierarchical Classification of Documents with Error Control

    E-Print Network [OSTI]

    Fu, Ada Waichee

    Hierarchical Classification of Documents with Error Control Chun­hung Cheng 1 , Jian Tang 2 , Ada. Classification is a function that matches a new object with one of the predefined classes. Document classification is characterized by the large number of attributes involved in the objects (documents

  5. Remote Sensing Ayman F. Habib Image Classification

    E-Print Network [OSTI]

    Habib, Ayman

    1 Remote Sensing Ayman F. Habib 1 Chapter 6 Image Classification Remote Sensing Ayman F. Habib 2. ­ Unsupervised classification. · Accuracy assessment. #12;2 Remote Sensing Ayman F. Habib 3 Image Classification of image pixels is based on their digital numbers/grey values in one or more spectral bands. Remote Sensing

  6. A comparison of automated land cover/use classification methods for a Texas bottomland hardwood system using lidar, spot-5, and ancillary data

    E-Print Network [OSTI]

    Vernon, Zachary Isaac

    2009-05-15T23:59:59.000Z

    obtained for this study. 17 Scene 589-283, collected on January 20, 2005, covers approximately 80% of the study area and scene 590-283, collected on February 21, 2005, covers approximately 10% along the eastern side. The remaining 10%, located.... The remaining 10%, along the western 21 edge of the study area, was delineated manually using high resolution aerial photography and NAIP Imagery. Two pixel based classification approaches were investigated, supervised and unsupervised. In order...

  7. THE UNIVERSITY OF CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Portman, Douglas

    1 THE UNIVERSITY OF ROCHESTER CLASSIFICATION DESCRIPTION TITLE: Web Specialist and Analyst DATE: 01 ­ Advancement Service and provide assistance in the development and management of web-based assets, direct solicitations support ­ webpages for print and e-mail marketing support, web development, Share

  8. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION Job Title: STAFF ASSISTANT (N6) Department: J. ROBERT VAN PELT LIBRARY Hourly Rate: MINIMUM $12.65 ­ MAXIMUM $16.20 Supervisor: STRATEGIC INITIATIVES LIBRARIAN SUMMARY: This position participates in a variety of digital library and service

  9. MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION

    E-Print Network [OSTI]

    Endres. William J.

    MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: BUILDING MECHANIC II (pay: Accountable for supervision and maintenance of all operating units in the SDC, MacInnes Ice Arena, Child Care, maintenance, sanitation, customer services and enforcement of SDC, MacInnes Ice Arena, Child Care Center

  10. Electric Utility Industry Update

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

  11. Uranium industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-04-01T23:59:59.000Z

    This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

  12. CASL Industry Council Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IndustryCouncil.shtml The new members that joined the Industry Council include NPP owneroperators with analysis capability: Tyrone Stevens of Exelon, and SMR vendors:...

  13. HANSF 1.3 user's manual

    SciTech Connect (OSTI)

    PLYS, M.G.

    1999-05-21T23:59:59.000Z

    The HANSF analysis tool is an integrated model considering phenomena inside a multi-canister overpack (MCO) spent nuclear fuel container such as fuel oxidation, convective and radiative heat transfer, and the potential for fission product release. It may be used for all phases of spent fuel disposition including cold vacuum drying, transportation, and storage. This manual reflects HANSF version 1.3, a revised version of version 1.2a. HANSF 1.3 was written to add new models for axial nodalization, add new features for ease of usage, and correct errors. HANSF 1.3 is intended for use on personal computers such as IBM-compatible machines with Intel processors running under a DOS-type operating system. HANSF 1.3 is known to compile under Lahey TI and Digital Visual FORTRAN, Version 6.0, but this does not preclude operation in other environments.

  14. SPARK Version 1. 1 user manual

    SciTech Connect (OSTI)

    Weissenburger, D.W.

    1988-01-01T23:59:59.000Z

    This manual describes the input required to use Version 1.1 of the SPARK computer code. SPARK 1.1 is a library of FORTRAN main programs and subprograms designed to calculate eddy currents on conducting surfaces where current flow is assumed zero in the direction normal to the surface. Surfaces are modeled with triangular and/or quadrilateral elements. Lorentz forces produced by the interaction of eddy currents with background magnetic fields can be output at element nodes in a form compatible with most structural analysis codes. In addition, magnetic fields due to eddy currents can be determined at points off the surface. Version 1.1 features eddy current streamline plotting with optional hidden-surface-removal graphics and topological enhancements that allow essentially any orientable surface to be modeled. SPARK also has extensive symmetry specification options. In order to make the manual as self-contained as possible, six appendices are included that present summaries of the symmetry options, topological options, coil options and code algorithms, with input and output examples. An edition of SPARK 1.1 is available on the Cray computers at the National Magnetic Fusion Energy Computer Center at Livermore, California. Another more generic edition is operational on the VAX computers at the Princeton Plasma Physics Laboratory and is available on magnetic tape by request. The generic edition requires either the GKS or PLOT10 graphics package and the IMSL or NAG mathematical package. Requests from outside the United States will be subject to applicable federal regulations regarding dissemination of computer programs. 22 refs.

  15. Department of Energy Budget Execution Funds Distribution and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-01-09T23:59:59.000Z

    As a service to all Department of Energy (DOE) elements, including the National Nuclear Security Administration (NNSA), this Manual provides the user with a single source for references, definitions, and procedural requirements for distributing and controlling Department of Energy (DOE) funds. Accordingly, the Manual provides detailed requirements to supplement DOE O 135.1A, Budget Execution—Funds Distribution and Control, dated 1-9-06. Paragraph 5, of DOE O 135.1A defines organizational responsibilities pertinent to this Manual. Cancels DOE M 135.1-1.

  16. Federal Radiological Monitoring and Assessment Center Health and Safety Manual

    SciTech Connect (OSTI)

    FRMAC Health and Safety Working Group

    2012-03-20T23:59:59.000Z

    This manual is a tool to provide information to all responders and emergency planners and is suggested as a starting point for all organizations that provide personnel/assets for radiological emergency response. It defines the safety requirements for the protection of all emergency responders. The intent is to comply with appropriate regulations or provide an equal level of protection when the situation makes it necessary to deviate. In the event a situation arises which is not addressed in the manual, an appropriate management-level expert will define alternate requirements based on the specifics of the emergency situation. This manual is not intended to pertain to the general public.

  17. Health and Safety Procedures Manual for hazardous waste sites

    SciTech Connect (OSTI)

    Thate, J.E.

    1992-09-01T23:59:59.000Z

    The Oak Ridge National Laboratory Chemical Assessments Team (ORNL/CAT) has developed this Health and Safety Procedures Manual for the guidance, instruction, and protection of ORNL/CAT personnel expected to be involved in hazardous waste site assessments and remedial actions. This manual addresses general and site-specific concerns for protecting personnel, the general public, and the environment from any possible hazardous exposures. The components of this manual include: medical surveillance, guidance for determination and monitoring of hazards, personnel and training requirements, protective clothing and equipment requirements, procedures for controlling work functions, procedures for handling emergency response situations, decontamination procedures for personnel and equipment, associated legal requirements, and safe drilling practices.

  18. Procedures manual for the Evaluated Nuclear Structure Data File

    SciTech Connect (OSTI)

    Bhat, M.R. (ed.)

    1987-10-01T23:59:59.000Z

    This manual is a collection of various notes, memoranda and instructions on procedures for the evaluation of data in the Evaluated Nuclear Structure Data File (ENSDF). They were distributed at different times over the past few years to the evaluators of nuclear structure data and some of them were not readily avaialble. Hence, they have been collected in this manual for ease of reference by the evaluators of the international Nuclear Structure and Decay Data (NSDD) network contribute mass-chains to the ENSDF. Some new articles were written specifically for this manual and others are reivsions of earlier versions.

  19. Industry Analysis February 2013

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    technology ­ Clean tech/ clean technology #12;7 Industry Studies · IbisWorld ­ U.S. and global industry-Industries · Biodiesel ­ Biofuel ­ Alternate fuels ­ Green fuels ­ Renewable fuels/energy ­ Green energy ­ Green Canada, Census, Industry Canada, the OECD, European Union, IMF, World Bank, UN . . . Never pay for stats

  20. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    : Occupational biomechanics, work physiology, industrial ergonomics, environmental hygiene, cognitive engineeringINDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor

  1. Healthy Housing Reference Manual Now Available The Centers for Disease Control and Prevention

    E-Print Network [OSTI]

    Healthy Housing Reference Manual Now Available The Centers for Disease Control and Prevention (CDC)/U.S. Department of Housing and Urban Development (HUD) Healthy Housing Reference Manual is a revised and updated edition of the 1976 CDC Basic Healthy Housing Inspection manual. The Healthy Housing Reference Manual

  2. Environmental effects of dredging. Engineer manual series on dredging and dredged material disposal. Technical notes

    SciTech Connect (OSTI)

    Palermo, M.R.

    1988-03-01T23:59:59.000Z

    This technical note describes a series of Engineer Manuals (EMs) on dredging and dredged material disposal being published by the Office, Chief of Engineers, US Army. The note describes the purpose of the manual series, intended audience, major topics covered, availability of published manuals, and the status of future manuals.

  3. Featureless Classification of Light Curves

    E-Print Network [OSTI]

    Kügler, Sven Dennis; Polsterer, Kai Lars

    2015-01-01T23:59:59.000Z

    In the era of rapidly increasing amounts of time series data, classification of variable objects has become the main objective of time-domain astronomy. Classification of irregularly sampled time series is particularly difficult because the data can not be represented naturally as a plain vector which directly can be fed into a classifier. In the literature, various statistical features derived from time series serve as a representation. Typically, the usefulness of the derived features is judged in an empirical fashion according to their predictive power. In this work, an alternative to the feature-based approach is investigated. In this new representation the time series is described by a density model. Similarity between each pair of time series is quantified by the distance between their respective models. The density model captures all the information available, also including measurement errors. Hence, we view this model as a generalisation to the static features which directly can be derived, e.g., as ...

  4. FUEL CONSERVATION BY THE APPLICATION OF SPILL PREVENTION AND FAILSAFE ENGINEERING (A GUIDELINE MANUAL)

    SciTech Connect (OSTI)

    Goodier,, J. L.; Siclari,, R. J.; Garrity,, P. A.

    1980-10-30T23:59:59.000Z

    From a series of nationwide plant surveys dedicated to spill prevention, containment and countermeasure evaluation, coupled with spill response action activities, a need was determined for a spill prevention guideline manual. From Federally accumulated statistics for oil and hazardous substance spills, the authors culled information on spills of hydrocarbon products. In 1978, a total of 1456 oil spills were reported compared to 1451 in 1979. The 1978 spills were more severe, however, since 7;289,163 gallons of oil were accident~y discharged. In 1979, the gallons spilled was reduced to 3,663,473. These figures are derived from reported spills; it is highly possible that an equal amount was spilled and not reported. Spills effectively contained within a plant property that do not enter a n~vigational waterway need not be reported. Needless to say, there is a tremendous annual loss of oil products due to accidental spillage during transportation, cargo transfer, bulk storage and processing. As an aid to plant engineers and managers, Fe~eral workers, fire marshalls and fire and casualty insurance inspectors, the documen~ is offered as a spill prevention guide. The'manual defines state-of-the-art spill prevention practices and automation techniques that can reduce spills caused by human error. Whenever practical, the cost of implementation is provided to aid equipment acquisition and installation budgeting. To emphasize the need for spill prevention activities, historic spills are briefly described after which remedial action is defined in an appropriate section of the manual. The section on plant security goes into considerable depth since to date no Federal agency or traqe association has provided industry with guidelines on this important phase of plant operation. The intent of the document is to provide finger-tip reference material that can be used by interested parties in a nationwide effort to reduce loss of oil from preventable spills.

  5. Class Discovery in Galaxy Classification

    E-Print Network [OSTI]

    David Bazell; David J. Miller

    2004-06-14T23:59:59.000Z

    In recent years, automated, supervised classification techniques have been fruitfully applied to labeling and organizing large astronomical databases. These methods require off-line classifier training, based on labeled examples from each of the (known) object classes. In practice, only a small batch of labeled examples, hand-labeled by a human expert, may be available for training. Moreover, there may be no labeled examples for some classes present in the data, i.e. the database may contain several unknown classes. Unknown classes may be present due to 1) uncertainty in or lack of knowledge of the measurement process, 2) an inability to adequately ``survey'' a massive database to assess its content (classes), and/or 3) an incomplete scientific hypothesis. In recent work, new class discovery in mixed labeled/unlabeled data was formally posed, with a proposed solution based on mixture models. In this work we investigate this approach, propose a competing technique suitable for class discovery in neural networks, and evaluate both methods for classification and class discovery on several astronomical data sets. Our results demonstrate up to a 57% reduction in classification error compared to a standard neural network classifier that uses only labeled data.

  6. Genetic classification of petroleum basins

    SciTech Connect (OSTI)

    Demaison, G.; Huizinga, B.J.

    1989-03-01T23:59:59.000Z

    Rather than relying on a descriptive geologic approach, this genetic classification is based on the universal laws that control processes of petroleum formation, migration, and entrapment. Petroleum basins or systems are defined as dynamic petroleum-generating and concentrating physico-chemical systems functioning on a geologic space and time scale. A petroleum system results from the combination of a generative subsystem (or hydrocarbon kitchen), essentially controlled by chemical processes, and a migration-entrapment subsystem, controlled by physical processes. The generative subsystem provides a certain supply of petroleum to the basin during a given geologic time span. The migration-entrapment subsystem receives petroleum and distributes it in a manner that can lead either to dispersion and loss or to concentration of the regional charge into economic accumulations. The authors classification scheme for petroleum basins rests on a simple working nomenclature consisting of the following qualifiers: (1) charge factor: undercharged, normally charged, or supercharged, (2) migration drainage factor: vertically drained or laterally drained, and (3) entrapment factor: low impedance or high impedance. Examples chosen from an extensive roster of documented petroleum basins are reviewed to explain the proposed classification.

  7. Manual for Control and Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-11-22T23:59:59.000Z

    The manual prescribes requirements and procedures for nuclear material control and accountability (MC&A). Cancels DOE M 474.1-1. Canceled by DOE M 474.1-1B.

  8. Manual for Control and Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-06-13T23:59:59.000Z

    The manual prescribes requirements and assign responsibilities for nuclear material control and accountability. Cancels DOE M 474.1-1A. Canceled by DOE M 470.4-6.

  9. Manual for Control And Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-08-11T23:59:59.000Z

    DOE M 474.1-1 prescribes Department of Energy (DOE) requirements and procedures for nuclear material control and accountability (MC&A). This Manual supplements DOE O 474.1, Control and Accountability of Nuclear Materials.

  10. August 2004 Radiation Safety Manual Section 5 -Training

    E-Print Network [OSTI]

    Wilcock, William

    August 2004 Radiation Safety Manual Section 5 - Training UW Environmental Health and Safety Page 5-1 Section 5 Radiation Safety Training Contents A. Individuals Directly Using Radioactive Materials..........................................5-1 1. Regulations for Training.................................................................. 5

  11. Nuclear Science References Coding Manual D.F. Winchell

    E-Print Network [OSTI]

    Ohta, Shigemi

    Nuclear Science References Coding Manual D.F. Winchell National Nuclear Data Center Brookhaven and coding procedures for specific topics . . 18 3.2.1 NUCLEAR REACTIONS . . . . . . . . . . . . . . . . 19 3.2.2 RADIOACTIVITY . . . . . . . . . . . . . . . . . . . . 20 3.2.3 NUCLEAR STRUCTURE

  12. Nano Research Facility Lab Safety Manual Nano Research Facility

    E-Print Network [OSTI]

    Subramanian, Venkat

    1 Nano Research Facility Lab Safety Manual Nano Research Facility: Weining Wang Office: Brauer---chemical, biological, or radiological. Notify the lab manager, Dr. Yujie Xiong at 5-4530. Eye Contact: Promptly flush

  13. Axiomatic design of a manually powered wheelchair lift mechanism

    E-Print Network [OSTI]

    DiGenova, Kevin (Kevin J.)

    2007-01-01T23:59:59.000Z

    The objective of this research is to create an inexpensive mechanism which gives wheelchair users the ability to adjust the vertical height of their chair while seated. There are currently 1.5 million manual wheelchair ...

  14. Multi-canister overpack operations and maintenance manual

    SciTech Connect (OSTI)

    PIERCE, S.R.

    1999-06-23T23:59:59.000Z

    This manual provides general operating and maintenance instructions for the Multi-Canister Overpack. Procedure outlines included are conceptual in nature and will be modified, expanded, and refined during preparation of detailed operating procedures.

  15. Manual for Identifying and Protecting Official Use Only Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09T23:59:59.000Z

    This Department of Energy (DOE) Manual provides detailed requirements to supplement DOE O 471.3, Identifying and Protecting Official Use Only Information, dated 4-9-03. Admin Chg dated 1-13-11.

  16. Identification and Protection of Unclassified Controlled Nuclear Information Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30T23:59:59.000Z

    The Manual provides detailed requirements to supplement the Order. Extended by DOE N 251.58, dated 07/06/2004, until 06/30/2005. Canceled by: DOE O 471.B. Does not cancel other directives.

  17. 38 CHAPTER 1. ASSEMBLY MANUAL BiDirectional Motor

    E-Print Network [OSTI]

    38 CHAPTER 1. ASSEMBLY MANUAL Bi­Directional Motor and Infrared Beacon Uni­Directional Motor, LED, Incandescent Lamp Sensor, Polarized Sensor, Non­polarized Figure 1.26: Standard Connector Plug Configurations

  18. U.S. Department of Energy Travel Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-02-17T23:59:59.000Z

    The Manual supplements information in the Federal Travel Regulation (FTR) by providing further clarification and establishing Department of Energy (DOE) policy on matters that the FTR left to Agency discretion. Cancels DOE M 552.1-1.

  19. Geothermal: Sponsored by OSTI -- User manual for geothermal energy...

    Office of Scientific and Technical Information (OSTI)

    User manual for geothermal energy assisted dairy complex computer programs: PREBLD, MODEL0, MODEL1, MODEL2, FRMAT2, PREPI2, NET2, DAIRY and DAIRY1 Geothermal Technologies Legacy...

  20. Battery Technology Life Verification Test Manual Revision 1

    SciTech Connect (OSTI)

    Jon P. Christophersen

    2012-12-01T23:59:59.000Z

    The purpose of this Technology Life Verification Test (TLVT) Manual is to help guide developers in their effort to successfully commercialize advanced energy storage devices such as battery and ultracapacitor technologies. The experimental design and data analysis discussed herein are focused on automotive applications based on the United States Advanced Battery Consortium (USABC) electric vehicle, hybrid electric vehicle, and plug-in hybrid electric vehicle (EV, HEV, and PHEV, respectively) performance targets. However, the methodology can be equally applied to other applications as well. This manual supersedes the February 2005 version of the TLVT Manual (Reference 1). It includes criteria for statistically-based life test matrix designs as well as requirements for test data analysis and reporting. Calendar life modeling and estimation techniques, including a user’s guide to the corresponding software tool is now provided in the Battery Life Estimator (BLE) Manual (Reference 2).

  1. Course Library Manual Leon Osinski, TU/e Library

    E-Print Network [OSTI]

    Franssen, Michael

    Course Library Manual Leon Osinski, TU/e Library Version 2, January 2008 #12;2 Table of contents .........................................................................................................................3 1. Adding a Library Folder to a course instance......................................................................3 2. The Library Folder

  2. HEWLETT-PACKARD ClubFitastic Energizer Manual-2013

    E-Print Network [OSTI]

    HEWLETT-PACKARD ClubFitastic Energizer Manual-2013 Pitt County Community Schools and Recreation Greenville, North Carolina Created by: Parents Council Scholars Coordinator for Pitt Co. Community Schools & Recreation, Bandemia and MUVE. The result was a collaborative

  3. DOE Manual Studies 11 Major CO2 Geologic Storage Formations

    Broader source: Energy.gov [DOE]

    A comprehensive study of 11 geologic formations suitable for permanent underground carbon dioxide (CO2) storage is contained in a new manual issued by the U.S. Department of Energy.

  4. National Solar Radiation Database 1991-2005 Update: User's Manual

    SciTech Connect (OSTI)

    Wilcox, S.

    2007-04-01T23:59:59.000Z

    This manual describes how to obtain and interpret the data products from the updated 1991-2005 National Solar Radiation Database (NSRDB). This is an update of the original 1961-1990 NSRDB released in 1992.

  5. Users Manual for TMY3 Data Sets (Revised)

    SciTech Connect (OSTI)

    Wilcox, S.; Marion, W.

    2008-05-01T23:59:59.000Z

    This users manual describes how to obtain and interpret the data in the Typical Meteorological Year version 3 (TMY3) data sets. These data sets are an update to the TMY2 data released by NREL in 1994.

  6. National Solar Radiation Database 1991-2010 Update: User's Manual

    SciTech Connect (OSTI)

    Wilcox, S. M.

    2012-08-01T23:59:59.000Z

    This user's manual provides information on the updated 1991-2010 National Solar Radiation Database. Included are data format descriptions, data sources, production processes, and information about data uncertainty.

  7. PV VALUE(tm) User Manual v. 1.0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV Value(tm) User Manual v. 1.0 Jamie L. Johnson - Solar Power Electric(tm) Geoffrey T. Klise - Sandia National Laboratories 1312012 SAND2012-0682P Sandia National Laboratories...

  8. PVREG - A photovoltaic voltage regulation investigation tool: Program reference manual

    SciTech Connect (OSTI)

    Garrett, D.L.; Sims, T.R.; Jones, R.A.; Jeter, S.M.

    1989-06-01T23:59:59.000Z

    This manual provides information for installing and maintaining the computer program PVREG, a program developed to study the impact of distributed photovoltaic systems on the voltage regulation of distribution systems. The manual describes installation on the Apollo workstation or the IBM PC-AT (or compatible), but the instructions and code description should be general enough to assist installation on other computers, also. The manual assumes that the user is well acquainted with the computer on which the program is to operate and with the operating system of that computer. The manual describes the program structure and models in detail and provides step-by-step installation instructions for both the Apollo and AT-compatible computers. 9 figs., 11 tabs.

  9. www.urjc.es Experto en Terapia Manual

    E-Print Network [OSTI]

    Rey Juan Carlos, Universidad

    BLOQUE V: FISIOTERAPIA MANUAL EN LA REGI�N CRÁNEO-FACIAL BLOQUE VI: CASO CLÍNICO DESTINATARIOS Diplomados locomotor,a excepción del primer seminario que será de disección y anatomía funcional. Los bloques son: BLOQUE I: M�DULO DE DISECCI�N ANAT�MICA BLOQUE II: FISIOTERAPIA MANUAL EN EL RAQUIS BLOQUE III

  10. Load research manual. Volume 3. Load research for advanced technologies

    SciTech Connect (OSTI)

    None

    1980-11-01T23:59:59.000Z

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. The manual includes guides to load research literature and glossaries of load research and statistical terms. In Volume 3, special load research procedures are presented for solar, wind, and cogeneration technologies.

  11. Training manual for precision hand deburring, Part 1

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1980-05-01T23:59:59.000Z

    Part 1 is presented of 4 parts of a training manual to be used by machinist trainees, production workers, and others removing burrs from precision miniature parts. The manuals are written to be self-teaching and are intended to be used with two hours of training each day and are intended to be used with two hours of training each day along with another six hours of bench work in deburring.

  12. Harrell Cattle Co. feedlot personnel training manual operation procedures

    E-Print Network [OSTI]

    Ulloa, Roberto Samuel

    1985-01-01T23:59:59.000Z

    EARRELL CATTLE CO. FEEDLOT PERSONNEL TRAINING MANUAL OPERATION PROCEDURES A Professional Paper by ROBERTO SAMUEL ULLOA Submitted to the Graduate College of Agriculture of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF AGRICULTURE May, 1985 Animal Science Feedlot Management HARRELL CATTLE CO. FEEDLOT PERSONNEL TRAINING MANUAL OPERATION PROCEDURES A Professional Paper by ROBERTO SAMUEL ULLOA Approved as to style and content by: Chairman...

  13. A manual for evaluation and exploitation of carbonate reservoirs

    E-Print Network [OSTI]

    Cordova, Pedro Luis

    1992-01-01T23:59:59.000Z

    A MANUAL FOR EVALUATION AND EXPI OITATION OF CARBONATE RESERVOIRS A Thesis bv PEDRO CORDOVA Submitted to the Office of Graduate Studies of Texas ASM University In Partial fulfillment of the requiren;enis for (he dc(n. ee of MASTER OF SCIENCE.... Brimhall (Member) James E. Russell (Head of Department) December 1992 ABSTRACT A Manual for Evaluation and Exploitation of Carbonate Reservoirs. (December 1992) Pedro Luis Cordova, B. S. , Universidad del Zulia Chair of Advisory Committee: Dr. W. J...

  14. Technical Manual for the SAM Biomass Power Generation Model

    SciTech Connect (OSTI)

    Jorgenson, J.; Gilman, P.; Dobos, A.

    2011-09-01T23:59:59.000Z

    This technical manual provides context for the implementation of the biomass electric power generation performance model in the National Renewable Energy Laboratory's (NREL's) System Advisor Model (SAM). Additionally, the report details the engineering and scientific principles behind the underlying calculations in the model. The framework established in this manual is designed to give users a complete understanding of behind-the-scenes calculations and the results generated.

  15. The industrial Center at Mississippi State University

    SciTech Connect (OSTI)

    b.K. Hodge; Mary C. Emplaincourt

    2007-04-30T23:59:59.000Z

    The Mississippi State University Industrial Assessment Center (IAC) is one of 26 centers supported by the U.S. Department of Energy (DOE) at universities across the country. The Mississippi State University IAC in existence since 1994 provides plant assessments at no cost to eligible small and mid-sized manufacturers categorized in Standard Industrial Classification (SIC) Codes 20-39. Client eligibility is based on gross sales below $100 million, fewer than 500 employees at the plant, annual utility bills more than $100,000 and less than $2 million, and no in-house professional staff to perform an assessment. IAC assessment benefits include no cost to the clients, increased profitability and competitiveness, confidentiality, non-regulatory, nonobligatory, and student involvement.

  16. Industry and forest wetlands: Cooperative research initiatives

    SciTech Connect (OSTI)

    Shepard, J.P. (National Council of the Paper Industry for Air and Stream Improvement, Gainesville, FL (United States)); Lucier, A.A. (National Council of the Paper Industry for Air and Stream Improvement, New York, NY (United States)); Haines, L.W. (International Paper, Bainbridge, GA (United States))

    1993-05-01T23:59:59.000Z

    In 1989 the forest products industry responded to a challenge of the National Wetlands Policy Forum to initiate a cooperative research program on forest wetlands management organized through the National Council of the Paper Industry for Air and Stream Improvement (NCASI). The objective is to determine how forest landowners can manage wetlands for timber production while protecting other wetland functions such as flood storage, water purification, and food chain/wildlife habitat support. Studies supported by the NCASI in 9 states are summarized. Technical support on wetland regulatory issues to member companies is part of the research program. Since guidelines for recognizing wetlands for regulatory proposed have changed frequently, the NCASI has recommend an explicit link between wetland delineation and a classification system that considers difference among wetland types in vegetation, soils, hydrology, appearance, landscape position, and other factors. 16 refs.

  17. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2005-02-25T23:59:59.000Z

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database.

  18. UMTRA (Uranium Mill Tailings Remedial Action) Project site management manual

    SciTech Connect (OSTI)

    Not Available

    1990-10-01T23:59:59.000Z

    The purpose of this manual is to summarize the organizational interfaces and the technical approach used to manage the planning, design development, National Environmental Policy Act (NEPA) compliance, engineering, and remedial action required to stabilize and control the designated Uranium Mill Tailings Remedial Action (UMTRA) Project sites. This manual describes the Project's objective, participants' roles and responsibilities, technical approach for accomplishing the objective, and planning and managerial controls to be used in performing the site work. The narrative follows the flow of activities depicted in Figure 1.1, which provides the typical sequence of key Project activities. A list of acronyms used is presented at the end of the manual. The comparable manual for UMTRA Project vicinity properties is the Vicinity Properties Management and Implementation Manual'' (VPMIM) (UMTRA-DOE/AL-050601). Together, the two manuals cover the remedial action activities associated with UMTRA Project sites. The UMTRA Project's objective is to stabilize and control the uranium mill tailings, vicinity property materials, and other residual radioactive materials at the designated sites (Figure 1.2) in a safe and environmentally sound manner in order to minimize radiation health hazards to the public. 26 figs., 6 tabs.

  19. Design manual for management of solid by-products from advanced coal technologies

    SciTech Connect (OSTI)

    NONE

    1994-10-01T23:59:59.000Z

    Developing coal conversion technologies face major obstacles in byproduct management. This project has developed several management strategies based on field trials of small-scale landfills in an earlier phase of the project, as well as on published/unpublished sources detailing regulatory issues, current industry practice, and reuse opportunities. Field testing, which forms the basis for several of the disposal alternatives presented in this design manual, was limited to byproducts from Ca-based dry SO{sub 2} control technologies, circulating fluidized bed combustion ash, and bubbling bed fluidized bed combustion ash. Data on byproducts from other advanced coal technologies and on reuse opportunities are drawn from other sources (citations following Chapter 3). Field results from the 5 test cases examined under this project, together with results from other ongoing research, provide a basis for predictive modeling of long-term performance of some advanced coal byproducts on exposure to ambient environment. This manual is intended to provide a reference database and development plan for designing, permitting, and operating facilities where advanced coal technology byproducts are managed.

  20. Tonopah Test Range capabilities: technical manual

    SciTech Connect (OSTI)

    Manhart, R.L.

    1982-11-01T23:59:59.000Z

    This manual describes Tonopah Test Range (TTR), defines its testing capabilities, and outlines the steps necessary to schedule tests on the Range. Operated by Sandia National Laboratories, TTR is a major test facility for DOE-funded weapon programs. The Range presents an integrated system for ballistic test vehicle tracking and data acquisition. Multiple radars, optical trackers, telemetry stations, a central computer complex, and combined landline/RF communications systems assure full Range coverage for any type of test. Range operations are conducted by a department within Sandia's Field Engineering Directorate. While the overall Range functions as a complete system, it is operationally divided into the Test Measurements, Instrumentation Development, and Range Operations divisions. The primary function of TTR is to support DOE weapons test activities. Management, however, encourages other Government agencies and their contractors to schedule tests on the Range which can make effective use of its capabilities. Information concerning Range use by organizations outside of DOE is presented. Range instrumentation and support facilities are described in detail. This equipment represents the current state-of-the-art and reflects a continuing commitment by TTR management to field the most effective tracking and data acquisition system available.

  1. Guidance manual for conducting technology demonstration activities

    SciTech Connect (OSTI)

    Jolley, R.L.; Morris, M.I.; Singh, S.P.N.

    1991-12-01T23:59:59.000Z

    This demonstration guidance manual has been prepared to assist Martin Marietta Energy Systems, Inc. (Energy Systems), staff in conducting demonstrations. It is prepared in checklist style to facilitate its use and assumes that Energy Systems personnel have project management responsibility. In addition to a detailed step-by-step listing of procedural considerations, a general checklist, logic flow diagram, and several examples of necessary plans are included to assist the user in developing an understanding of the many complex activities required to manage technology demonstrations. Demonstrations are pilot-scale applications of often innovative technologies to determine the commercial viability of the technologies to perform their designed function. Demonstrations are generally conducted on well-defined problems for which existing technologies or processes are less than satisfactory in terms of effectiveness, cost, and/or regulatory compliance. Critically important issues in demonstration management include, but are not limited to, such factors as communications with line and matrix management and with the US Department of Energy (DOE) and Energy Systems staff responsible for management oversight, budgetary and schedule requirements, regulatory compliance, and safety.

  2. HTGR Application Economic Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01T23:59:59.000Z

    The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

  3. Performance analysis of distributed applications using automatic classification of communication inefficiencies

    DOE Patents [OSTI]

    Vetter, Jeffrey S.

    2005-02-01T23:59:59.000Z

    The method and system described herein presents a technique for performance analysis that helps users understand the communication behavior of their message passing applications. The method and system described herein may automatically classifies individual communication operations and reveal the cause of communication inefficiencies in the application. This classification allows the developer to quickly focus on the culprits of truly inefficient behavior, rather than manually foraging through massive amounts of performance data. Specifically, the method and system described herein trace the message operations of Message Passing Interface (MPI) applications and then classify each individual communication event using a supervised learning technique: decision tree classification. The decision tree may be trained using microbenchmarks that demonstrate both efficient and inefficient communication. Since the method and system described herein adapt to the target system's configuration through these microbenchmarks, they simultaneously automate the performance analysis process and improve classification accuracy. The method and system described herein may improve the accuracy of performance analysis and dramatically reduce the amount of data that users must encounter.

  4. KEPLER ECLIPSING BINARY STARS. III. CLASSIFICATION OF KEPLER ECLIPSING BINARY LIGHT CURVES WITH LOCALLY LINEAR EMBEDDING

    SciTech Connect (OSTI)

    Matijevic, Gal [Faculty of Mathematics and Physics, University of Ljubljana, Jadranska 19, 1000 Ljubljana (Slovenia); Prsa, Andrej [Department of Astronomy and Astrophysics, Villanova University, 800 E Lancaster Ave, Villanova, PA 19085 (United States); Orosz, Jerome A.; Welsh, William F. [Department of Astronomy, San Diego State University, 5500 Campanile Dr., San Diego, CA 92182 (United States); Bloemen, Steven [Instituut voor Sterrenkunde, KU Leuven, Celestijnenlaan 200 D, B-3001 Leuven (Belgium); Barclay, Thomas, E-mail: gal.matijevic@fmf.uni-lj.si, E-mail: andrej.prsa@villanova.edu [NASA Ames Research Center/BAER Institute, Moffett Field, CA 94035 (United States)

    2012-05-15T23:59:59.000Z

    We present an automated classification of 2165 Kepler eclipsing binary (EB) light curves that accompanied the second Kepler data release. The light curves are classified using locally linear embedding, a general nonlinear dimensionality reduction tool, into morphology types (detached, semi-detached, overcontact, ellipsoidal). The method, related to a more widely used principal component analysis, produces a lower-dimensional representation of the input data while preserving local geometry and, consequently, the similarity between neighboring data points. We use this property to reduce the dimensionality in a series of steps to a one-dimensional manifold and classify light curves with a single parameter that is a measure of 'detachedness' of the system. This fully automated classification correlates well with the manual determination of morphology from the data release, and also efficiently highlights any misclassified objects. Once a lower-dimensional projection space is defined, the classification of additional light curves runs in a negligible time and the method can therefore be used as a fully automated classifier in pipeline structures. The classifier forms a tier of the Kepler EB pipeline that pre-processes light curves for the artificial intelligence based parameter estimator.

  5. Context-based automated defect classification system using multiple morphological masks

    DOE Patents [OSTI]

    Gleason, Shaun S. (Knoxville, TN); Hunt, Martin A. (Knoxville, TN); Sari-Sarraf, Hamed (Lubbock, TX)

    2002-01-01T23:59:59.000Z

    Automatic detection of defects during the fabrication of semiconductor wafers is largely automated, but the classification of those defects is still performed manually by technicians. This invention includes novel digital image analysis techniques that generate unique feature vector descriptions of semiconductor defects as well as classifiers that use these descriptions to automatically categorize the defects into one of a set of pre-defined classes. Feature extraction techniques based on multiple-focus images, multiple-defect mask images, and segmented semiconductor wafer images are used to create unique feature-based descriptions of the semiconductor defects. These feature-based defect descriptions are subsequently classified by a defect classifier into categories that depend on defect characteristics and defect contextual information, that is, the semiconductor process layer(s) with which the defect comes in contact. At the heart of the system is a knowledge database that stores and distributes historical semiconductor wafer and defect data to guide the feature extraction and classification processes. In summary, this invention takes as its input a set of images containing semiconductor defect information, and generates as its output a classification for the defect that describes not only the defect itself, but also the location of that defect with respect to the semiconductor process layers.

  6. Discriminant forest classification method and system

    DOE Patents [OSTI]

    Chen, Barry Y.; Hanley, William G.; Lemmond, Tracy D.; Hiller, Lawrence J.; Knapp, David A.; Mugge, Marshall J.

    2012-11-06T23:59:59.000Z

    A hybrid machine learning methodology and system for classification that combines classical random forest (RF) methodology with discriminant analysis (DA) techniques to provide enhanced classification capability. A DA technique which uses feature measurements of an object to predict its class membership, such as linear discriminant analysis (LDA) or Andersen-Bahadur linear discriminant technique (AB), is used to split the data at each node in each of its classification trees to train and grow the trees and the forest. When training is finished, a set of n DA-based decision trees of a discriminant forest is produced for use in predicting the classification of new samples of unknown class.

  7. University Policy No.: AD2530 Classification: Administration

    E-Print Network [OSTI]

    Victoria, University of

    University Policy No.: AD2530 Classification: Administration PHOTOCOPY AND FACSIMILE (FAX may be obtained through library managed machines or through the use of personal accounts. 1

  8. Physical capabilities of experienced manual material handlers

    E-Print Network [OSTI]

    Wingate, Kyle Alan

    1997-01-01T23:59:59.000Z

    -improvement. In other words, there should be more data in terms of employee habits, lifestyles, job tasks, and health in order to determine the best physical and mental workload to endure and optimize the employee's skills to best fit his or her workload and improve... should be studied and where certain programs should be implemented. One such program is education. The employees, supervisors, and management should be well informed as to the strengths and weaknesses in their industry. This knowledge should...

  9. Geomorphic Stream Classification "A Classification of Natural Rivers", Rosgen, D.L.

    E-Print Network [OSTI]

    and animals are constrained by natural channel physics #12;Stream Corridor Restoration: Principles, ProcessesGeomorphic Stream Classification "A Classification of Natural Rivers", Rosgen, D.L. #12;Why is Stream Classification Essential? Napeequa River · Physical stream channel evolution ·Similar stream types

  10. The Industrial Electrification Program

    E-Print Network [OSTI]

    Harry, I. L.

    1982-01-01T23:59:59.000Z

    EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

  11. Electrotechnologies in Process Industries

    E-Print Network [OSTI]

    Amarnath, K. R.

    The Industrial Program at the Electric Power Research Institute (EPRI) promotes the efficient use of electricity to improve the competitive position of the American industry. Electrotechnologies that improve productivity, improve quality...

  12. and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    technologicalandlogisticssystemsbygathering, structuring, and managing information. Indus- trial engineers apply their knowledge not only45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle

  13. Demographics and industry returns

    E-Print Network [OSTI]

    Pollet, Joshua A.; DellaVigna, Stefano

    2007-01-01T23:59:59.000Z

    Industry category Child care Children’s books Children’s clothing Toysindustry Child care Children’s books Children’s clothing ToysIndustries are associated with high demand by children (child care, toys) and

  14. INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY

    E-Print Network [OSTI]

    Pohl, Karsten

    INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

  15. Industry Analysis October 2010

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    Different regulations for some industries in Canada, the U.S. and Europe ie. telecommunications, energy of energy, materials, industrial waste, byproducts #12;Contact Constance Adamson Stauffer Library adamsonc

  16. Geothermal Industry Partnership Opportunities

    Broader source: Energy.gov [DOE]

    Here you'll find links to information about partnership opportunities and programs for the geothermal industry.

  17. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

  18. Industrial Dojo Program Fosters Industrial Internet Development...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE Launches Cloud Foundry 'Industrial Dojo,' Contributes to Open Source to Foster Continued...

  19. Industrial policy and the Indian electronics industry

    E-Print Network [OSTI]

    Love, Robert (Robert Eric)

    2008-01-01T23:59:59.000Z

    Recently, production within India's Electronics sector amounted to a low $12 billion when compared to the global output of $1400 billion. The slow growth in the local industry is often judged to be the result of late ...

  20. LANSCE | Lujan Center | Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Users The Lujan Neutron Scattering Center offers a diverse set of capabilities and instruments for industrial projects. Industrial users are invited to contact Fredrik...

  1. US Fish and Wildlife Service lands biomonitoring operations manual

    SciTech Connect (OSTI)

    Rope, R.C.; Breckenridge, R.P.

    1993-08-01T23:59:59.000Z

    This is Volume 1 of an operations manual designed to facilitate the development of biomonitoring strategies for U.S. Fish and Wildlife Service Lands. It is one component of the U.S. Fish and Wildlife Service Lands Biomonitoring Operations Manual. The Volume contains the Introduction to the Manual, background information on monitoring, and procedures for developing a biomonitoring strategy for Service lands. The purpose of the Biomonitoring Operations Manual is to provide an approach to develop and implement biomonitoring activities to assess the status and trends of U.S. Fish and Wildlife Service trust resources. It also provides field sampline methods and documentation protocols for contaminant monitoring activities. The strategy described in the Manual has been designed as a stand alone process to characterize the presence of contaminants on lands managed by the Service. This process can be sued to develop a monitoring program for any tract of real estate with potential threats from on- or off-site contaminants. Because the process was designed to address concerns for Service lands that span the United States from Alaska to the Tropical Islands, it has a generic format that can be used in al types of ecosystems, however, significant site specific informtion is required to complete the Workbook and make the process work successfully.

  2. Hierarchical Classification of Documents with Error Control

    E-Print Network [OSTI]

    King, Kuo Chin Irwin

    Hierarchical Classification of Documents with Error Control Chun-hung Cheng1 , Jian Tang2 , Ada Wai is a function that matches a new object with one of the predefined classes. Document classification is characterized by the large number of attributes involved in the objects (documents). The traditional method

  3. Oil Classification with Fluorescence Spectroscopy Engineering Physics

    E-Print Network [OSTI]

    Oldenburg, Carl von Ossietzky Universität

    detected by these channels. The investigation used three methods to examine crude oil, heavy oil, sludge1 Oil Classification with Fluorescence Spectroscopy Engineering Physics Master of Engineering and classification of oil spills on water surfaces. It is an overview of the laser remote sensor technique

  4. Classification of Unexploded Ordnance Laurens Sander Beran

    E-Print Network [OSTI]

    Oldenburg, Douglas W.

    Classification of Unexploded Ordnance by Laurens Sander Beran B.Sc., The University of Victoria degree at the University of British Columbia, I agree that the Library shall make it freely available and clutter. In the statistical classification framework, model parameters are basis vectors within a multi

  5. A Thermodynamic Classification of Real Numbers

    E-Print Network [OSTI]

    Thomas Garrity

    2009-03-15T23:59:59.000Z

    A new classification scheme for real numbers is given, motivated by ideas from statistical mechanics in general and work of Knauf and of Fiala and Kleban in particular. Critical for this classification of a real number will be the Diophantine properties of its continued fraction expansion.

  6. Approaching Real-time Network Traffic Classification

    E-Print Network [OSTI]

    Haddadi, Hamed

    and studies. It serves as the input for Intrusion Detection Systems, provides Class-of-Service (CoS) mapping22 Approaching Real-time Network Traffic Classification ISSN 1470-5559 RR-06-12 October 2006-time Network Traffic Classification Wei Li, Kaysar Abdin, Robert Dann and Andrew Moore Department of Computer

  7. WYDOT Access Manual | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwide Permit webpage Jump to: navigation,WSDNR FormsWWTP PowerWYDOT

  8. Best Practices Manuals | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced Materials Find MoreLawrence Berkeley Industrial8 Best EstimateBest

  9. Uranium industry annual 1998

    SciTech Connect (OSTI)

    NONE

    1999-04-22T23:59:59.000Z

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

  10. Uranium industry annual 1994

    SciTech Connect (OSTI)

    NONE

    1995-07-05T23:59:59.000Z

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

  11. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  12. CLARIFICATION: Incorporation of OFPC Manual and Document Updates Updated documents should be incorporated in to projects as follows

    E-Print Network [OSTI]

    O'Toole, Alice J.

    CLARIFICATION: Incorporation of OFPC Manual and Document Updates Updated documents should be incorporated in to projects as follows: Project Management Manual (PMM) and Construction Inspection Manual (CIM approved by senior project management, project managers shall require the design professional

  13. PETSc Users Manual Revision 3.3

    SciTech Connect (OSTI)

    Balay, S. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Brown, J. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Buschelman, K. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Eijkhout, V. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Gropp, W. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Kaushik, D. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Knepley, M. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; McInnes, L. Curfman [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Smith, B. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Zhang, H. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division

    2013-05-11T23:59:59.000Z

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself; For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  14. PETSc Users Manual Revision 3.5

    SciTech Connect (OSTI)

    Balay, S. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Abhyankar, S. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Adams, M. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Brown, J. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Brune, P. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Buschelman, K. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Eijkhout, V. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Gropp, W. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Kaushik, D. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Knepley, M. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; McInnes, L. Curfman [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Rupp, K. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Smith, B. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Zhang, H. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division

    2014-09-08T23:59:59.000Z

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself. ;For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  15. PETSc Users Manual Revision 3.4

    SciTech Connect (OSTI)

    Balay, S. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Brown, J. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Buschelman, K. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Eijkhout, V. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Gropp, W. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Kaushik, D. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Knepley, M. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; McInnes, L. Curfman [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Smith, B. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division; Zhang, H. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science Division

    2014-06-29T23:59:59.000Z

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself; For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  16. Guidelines for the verification and validation of expert system software and conventional software: User`s manual. Volume 7

    SciTech Connect (OSTI)

    Mirsky, S.M.; Hayes, J.E.; Miller, L.A. [Science Applications International Corp., McLean, VA (United States)

    1995-03-01T23:59:59.000Z

    This report provides a step-by-step guide, or user manual, for personnel responsible for the planning and execution of the verification and validation (V&V), and developmental testing, of expert systems, conventional software systems, and various other types of artificial intelligence systems. While the guide was developed primarily for applications in the utility industry, it applies well to all industries. The user manual has three sections. In Section 1 the user assesses the stringency of V&V needed for the system under consideration, identifies the development stage the system is in, and identifies the component(s) of the system to be tested next. These three pieces of information determine which Guideline Package of V&V methods is most appropriate for those conditions. The V&V Guideline Packages are provided in Section 2. Each package consists of an ordered set of V&V techniques to be applied to the system, guides on choosing the review/evaluation team, measurement criteria, and references to a book or report which describes the application of the method. Section 3 presents details of 11 of the most important (or least well-explained in the literature) methods to assist the user in applying these techniques accurately.

  17. Spent nuclear fuel project cold vacuum drying facility operations manual

    SciTech Connect (OSTI)

    IRWIN, J.J.

    1999-05-12T23:59:59.000Z

    This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998) and, the HNF-SD-SNF-DRD-002, 1997, Cold Vacuum Drying Facility Design Requirements, Rev. 3a. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence, and has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

  18. Reactor Decommissioning - Balancing Remote and Manual Activities - 12159

    SciTech Connect (OSTI)

    Cole, Matt [S.A. Technology (United States)

    2012-07-01T23:59:59.000Z

    Nuclear reactors come in a wide variety of styles, size, and ages. However, during decommissioned one issue they all share is the balancing of remotely and manually activities. For the majority of tasks there is a desire to use manual methods because remote working can be slower, more expensive, and less reliable. However, because of the unique hazards of nuclear reactors some level of remote activity will be necessary to provide adequate safety to workers and properly managed and designed it does not need to be difficult nor expensive. The balance of remote versus manual work can also affect the amount and types of waste that is generated. S.A.Technology (SAT) has worked on a number of reactor decommissioning projects over the last two decades and has a range of experience with projects using remote methods to those relying primarily on manual activities. This has created a set of lessons learned and best practices on how to balance the need for remote handling and manual operations. Finding a balance between remote and manual operations on reactor decommissioning can be difficult but by following certain broad guidelines it is possible to have a very successfully decommissioning. It is important to have an integrated team that includes remote handling experts and that this team plans the work using characterization efforts that are efficient and realistic. The equipment need to be simple, robust and flexible and supported by an on-site team committed to adapting to day-to-day challenges. Also, the waste strategy needs to incorporate the challenges of remote activities in its planning. (authors)

  19. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2009-08-28T23:59:59.000Z

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  20. Packaging and Transfer of Materials of National Security Interest Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-09-29T23:59:59.000Z

    This Technical Manual establishes requirements for operational safety controls for onsite operations and provides Department of Energy (DOE) technical safety requirements and policy objectives for development of an Onsite Packaging and Transfer Program, pursuant to DOE O 461.1A, Packaging and Transfer or Transportation of Materials of National Security Interest. The DOE contractor must document this program in its Onsite Packaging and Transfer Manual/Procedures. Admin Chg 1, 7-26-05. Certified 2-2-07. Canceled by DOE O 461.2.