Powered by Deep Web Technologies
Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Copper Indium Gallium Diselenide  

Broader source: Energy.gov [DOE]

DOE-sponsored research on copper indium gallium diselenide [Cu(InxGa1-x)Se2], or CIGS, solar cells focuses on developing better film qualities, and thus, higher efficiencies. A list of current...

2

Preparation Of Copper Indium Gallium Diselenide Films For Solar Cells  

DOE Patents [OSTI]

High quality thin films of copper-indium-gallium-diselenide useful in the production of solar cells are prepared by electrodepositing at least one of the constituent metals onto a glass/Mo substrate, followed by physical vapor deposition of copper and selenium or indium and selenium to adjust the final stoichiometry of the thin film to approximately Cu(In,Ga)Se.sub.2. Using an AC voltage of 1-100 KHz in combination with a DC voltage for electrodeposition improves the morphology and growth rate of the deposited thin film. An electrodeposition solution comprising at least in part an organic solvent may be used in conjunction with an increased cathodic potential to increase the gallium content of the electrodeposited thin film.

Bhattacharya, Raghu N. (Littleton, CO); Contreras, Miguel A. (Golden, CO); Keane, James (Lakewood, CO); Tennant, Andrew L. (Denver, CO), Tuttle, John R. (Denver, CO); Ramanathan, Kannan (Lakewood, CO); Noufi, Rommel (Golden, CO)

1998-08-08T23:59:59.000Z

3

Precursors for formation of copper selenide, indium selenide, copper indium diselenide, and/or copper indium gallium diselenide films  

DOE Patents [OSTI]

Liquid-based precursors for formation of Copper Selenide, Indium Selenide, Copper Indium Diselenide, and/or copper Indium Galium Diselenide include copper-organoselenides, particulate copper selenide suspensions, copper selenide ethylene diamine in liquid solvent, nanoparticulate indium selenide suspensions, and indium selenide ethylene diamine coordination compounds in solvent. These liquid-based precursors can be deposited in liquid form onto substrates and treated by rapid thermal processing to form crystalline copper selenide and indium selenide films.

Curtis, Calvin J; Miedaner, Alexander; Van Hest, Maikel; Ginley, David S

2014-11-04T23:59:59.000Z

4

Preparation of copper-indium-gallium-diselenide precursor films by electrodeposition for fabricating high efficiency solar cells  

DOE Patents [OSTI]

A photovoltaic cell exhibiting an overall conversion efficiency of 13.6% is prepared from a copper-indium-gallium-diselenide precursor thin film. The film is fabricated by first simultaneously electrodepositing copper, indium, gallium, and selenium onto a glass/molybdenum substrate (12/14). The electrodeposition voltage is a high frequency AC voltage superimposed upon a DC voltage to improve the morphology and growth rate of the film. The electrodeposition is followed by physical vapor deposition to adjust the final stoichiometry of the thin film to approximately Cu(In.sub.1-n Ga.sub.x)Se.sub.2, with the ratio of Ga/(In+Ga) being approximately 0.39.

Bhattacharya, Raghu N. (Littleton, CO); Hasoon, Falah S. (Arvada, CO); Wiesner, Holm (Golden, CO); Keane, James (Lakewood, CO); Noufi, Rommel (Golden, CO); Ramanathan, Kannan (Golden, CO)

1999-02-16T23:59:59.000Z

5

Electrical Bias as an Alternate Method for Reproducible Measurement of Copper Indium Gallium Diselenide (CIGS) Photovoltaic Modules: Preprint  

SciTech Connect (OSTI)

Light-to-dark metastable changes in thin-film photovoltaic (PV) modules can introduce uncertainty when measuring module performance on indoor flash testing equipment. This study describes a method to stabilize module performance through forward-bias current injection rather than light exposure. Measurements of five pairs of thin-film copper indium gallium diselenide (CIGS) PV modules indicate that forward-bias exposure maintained the PV modules at a stable condition (within 1%) while the unbiased modules degraded in performance by up to 12%. It was additionally found that modules exposed to forward bias exhibited stable performance within about 3% of their long-term outdoor exposed performance. This carrier-injection method provides a way to reduce uncertainty arising from fast transients in thin-film module performance between the time a module is removed from light exposure and when it is measured indoors, effectively simulating continuous light exposure by injecting minority carriers that behave much as photocarriers do. This investigation also provides insight into the initial light-induced transients of thin-film modules upon outdoor deployment.

Deline, C.; Stokes, A.; Silverman, T. J.; Rummel, S.; Jordan, D.; Kurtz, S.

2012-08-01T23:59:59.000Z

6

E-Print Network 3.0 - aluminum gallium indium Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Physics, Portland State University Collection: Physics 2 Alternative Energy Technologies Solar Power Summary: CIGS - Copper - Indium - Gallium - diSelenide Cd-Te -- Cadmium...

7

Characterizing organometallic-vapor-phase-epitaxy-grown indium gallium nitride islands on gallium nitride for light emitting diode applications.  

E-Print Network [OSTI]

??The indium-gallium-nitride on gallium-nitride (InGaN/GaN) materials system is a promising candidate for providing a high intensity, high efficiency solution to the yet unsolved problem of… (more)

Anderson, Kathy Perkins Jenkins

2011-01-01T23:59:59.000Z

8

Formation of copper-indium-selenide and/or copper-indium-gallium-selenide films from indium selenide and copper selenide precursors  

DOE Patents [OSTI]

Liquid-based indium selenide and copper selenide precursors, including copper-organoselenides, particulate copper selenide suspensions, copper selenide ethylene diamine in liquid solvent, nanoparticulate indium selenide suspensions, and indium selenide ethylene diamine coordination compounds in solvent, are used to form crystalline copper-indium-selenide, and/or copper indium gallium selenide films (66) on substrates (52).

Curtis, Calvin J. (Lakewood, CO); Miedaner, Alexander (Boulder, CO); Van Hest, Maikel (Lakewood, CO); Ginley, David S. (Evergreen, CO); Nekuda, Jennifer A. (Lakewood, CO)

2011-11-15T23:59:59.000Z

9

Diffusion of indium and gallium in Cu(In,Ga)Se2 thin film solar cells  

E-Print Network [OSTI]

Diffusion of indium and gallium in Cu(In,Ga)Se2 thin film solar cells O. Lundberga,*, J. Lua , A. Rockettb , M. Edoffa , L. Stolta a A°ngstro¨m Solar Center, Uppsala University, P.O. Box 534, SE-751 21 Abstract The diffusion of indium and gallium in polycrystalline thin film Cu(In,Ga)Se2 layers has been

Rockett, Angus

10

Synthesis and use of (polyfluoroaryl)fluoroanions of aluminum, gallium and indium  

DOE Patents [OSTI]

Salts of (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium are described. The (polyfluoroaryl)fluoroanions have the formula [ER'R"R'"F].sup..crclbar. wherein E is aluminum, gallium, or indium, wherein F is fluorine, and wherein R', R", and R'" is each a fluorinated phenyl, fluorinated biphenyl, or fluorinated polycyclic group.

Marks, Tobin J. (Evanston, IL); Chen, You-Xian (Midland, MI)

2000-01-01T23:59:59.000Z

11

(Polyfluoroaryl) fluoroanions of aluminum, gallium, and indium of enhanced utility, uses thereof, and products based thereon  

DOE Patents [OSTI]

The (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium are novel weakly coordinating anions which are highly fluorinated. (Polyfluoroaryl)fluoroanions of one such type contain at least one ring substituent other than fluorine. These (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium have greater solubility in organic solvents, or have a coordinative ability essentially equal to or less than that of the corresponding (polyfluoroaryl)fluoroanion of aluminum, gallium, or indium in which the substituent is replaced by fluorine. Another type of new (polyfluoroaryl)fluoroanion of aluminum, gallium, and indium have 1-3 perfluorinated fused ring groups and 2-0 perfluorophenyl groups. When used as a cocatalyst in the formation of novel catalytic complexes with d- or f-block metal compounds having at least one leaving group such as a methyl group, these anions, because of their weak coordination to the metal center, do not interfere in the ethylene polymerization process, while affecting the propylene process favorably, if highly isotactic polypropylene is desired. Thus, the (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium of this invention are useful in various polymerization processes such as are described.

Marks, Tobin J. (Evanston, IL); Chen, You-Xian (Midland, MI)

2002-01-01T23:59:59.000Z

12

(Polyfluoroaryl) fluoroanions of aluminum, gallium, and indium of enhanced utility, uses thereof, and products based thereon  

DOE Patents [OSTI]

The (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium are novel weakly coordinating anions which are highly fluorinated. (Polyfluoroaryl)fluoroanions of one such type contain at least one ring substituent other than fluorine. These (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium have greater solubility in organic solvents, or have a coordinative ability essentially equal to or less than that of the corresponding (polyfluoroaryl)fluoroanion of aluminum, gallium, or indium in which the substituent is replaced by fluorine. Another type of new (polyfluoroaryl)fluoroanion of aluminum, gallium, and indium have 1-3 perfluorinated fused ring groups and 2-0 perfluorophenyl groups. When used as a cocatalyst in the formation of novel catalytic complexes with d- or f-block metal compounds having at least one leaving group such as a methyl group, these anions, because of their weak coordination to the metal center, do not interfere in the ethylene polymerization process, while affecting the propylene process favorably, if highly isotactic polypropylene is desired. Thus, the (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium of this invention are useful in various polymerization processes such as are described.

Marks, Tobin J. (Evanston, IL); Chen, You-Xian (Midland, MI)

2001-01-01T23:59:59.000Z

13

amorphous indium gallium: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on which all indium abundance studies are based, both for the quiet-sun and the sunspot umbra spectrum, employing standard atmosphere models and accounting for hyperfine structure...

14

(Polyfluoroaryl)fluoroanions of aluminum, gallium, and indium of enhanced utility, uses thereof, and products based thereon  

DOE Patents [OSTI]

The (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium are novel weakly coordinating anions which are are highly fluorinated. (Polyfluoroaryl)fluoroanions of one such type contain at least one ring substituent other than fluorine. These (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium have greater solubility in organic solvents, or have a coordinative ability essentially equal to or less than that of the corresponding (polyfluoroaryl)fluoroanion of aluminum, gallium, or indium in which the substituent is replaced by fluorine. Another type of new (polyfluoroaryl)fluoroanion of aluminum, gallium, and indium have 1-3 perfluorinated fused ring groups and 2-0 perfluorophenyl groups. When used as a cocatalyst in the formation of novel catalytic complexes with d- or f-block metal compounds having at least one leaving group such as a methyl group, these anions, because of their weak coordination to the metal center, do not interefere in the ethylene polymerization process, while affecting the the propylene process favorably, if highly isotactic polypropylene is desired. Thus, the (polyfluoroaryl)fluoroanions of aluminum, gallium, and indium of this invention are useful in various polymerization processes such as are described.

Marks, Tobin J. (Evanston, IL); Chen, You-Xian (Midland, MI)

2001-01-01T23:59:59.000Z

15

Distinctive Signature of Indium Gallium Nitride Quantum Dot Lasing in Microdisks Cavities  

E-Print Network [OSTI]

Low threshold lasers realized within compact, high quality optical cavities enable a variety of nanophotonics applications. Gallium nitride (GaN) materials containing indium gallium nitride (InGaN) quantum dots and quantum wells offer an outstanding platform to study light matter interactions and realize practical devices such as efficient light emitting diodes and nanolasers. Despite progress in the growth and characterization of InGaN quantum dots, their advantages as the gain medium in low threshold lasers have not been clearly demonstrated. This work seeks to better understand the reasons for these limitations by focusing on the simpler, limited-mode microdisk cavities, and by carrying out comparisons of lasing dynamics in those cavities using varying gain media including InGaN quantum wells, fragmented quantum wells, and a combination of fragmented quantum wells with quantum dots. For each gain medium, we utilize the distinctive, high quality (Q~5500) modes of the cavities, and the change in the highest ...

Woolf, Alexander; Aharanovich, Igor; Zhu, Tongtong; Niu, Nan; Wang, Danqing; Oliver, Rachel A; Hu, Evelyn L

2014-01-01T23:59:59.000Z

16

Dual operation characteristics of resistance random access memory in indium-gallium-zinc-oxide thin film transistors  

SciTech Connect (OSTI)

In this study, indium-gallium-zinc-oxide thin film transistors can be operated either as transistors or resistance random access memory devices. Before the forming process, current-voltage curve transfer characteristics are observed, and resistance switching characteristics are measured after a forming process. These resistance switching characteristics exhibit two behaviors, and are dominated by different mechanisms. The mode 1 resistance switching behavior is due to oxygen vacancies, while mode 2 is dominated by the formation of an oxygen-rich layer. Furthermore, an easy approach is proposed to reduce power consumption when using these resistance random access memory devices with the amorphous indium-gallium-zinc-oxide thin film transistor.

Yang, Jyun-Bao; Chen, Yu-Ting; Chu, Ann-Kuo [Department of Photonics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Chang, Ting-Chang, E-mail: tcchang@mail.phys.nsysu.edu.tw [Department of Photonics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Department of Physics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Advanced Optoelectronics Technology Center, National Cheng Kung University, Taiwan (China); Huang, Jheng-Jie; Chen, Yu-Chun; Tseng, Hsueh-Chih [Department of Physics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Sze, Simon M. [Department of Physics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Department of Electronics Engineering, National Chiao Tung University, Hsinchu, Taiwan (China)

2014-04-14T23:59:59.000Z

17

Catalytic and physicochemical properties of aluminoplatinum catalysts modified with indium and gallium  

SciTech Connect (OSTI)

Aluminoplatinum catalysts (APC) are widely used in transformations of hydrocarbons, particularly in reforming of gasoline fractions and dehydrogenation of higher normal paraffins. Promotion of APC with indium and gallium increases their activity and stability in the dehydrogenation of paraffins. Introduction of group III elements in APC inhibits coke formation during dehydrogenation and prevents blocking of the surface of the Pt. The change in the catalytic properties of APC modified with In is due to the partial transfer of the electron density from Pt to In. Both APC with In and Ga additives and monometallic catalysts were studied in the present article by the methods of IR spectroscopy and adsorption. In addition to traditional transmission IR spectroscopy, IR spectroscopy in diffusely scattered light was used, which permits conducting both spectral and adsorption measurements on the same samples.

Zaitsev, A.V.; Tyupaev, A.P.; Borovkov, V.Yu.; Timofeeva, E.A.; Isatulyants, G.V.; Kazanskii, B.B.

1986-10-10T23:59:59.000Z

18

Origin of deep subgap states in amorphous indium gallium zinc oxide: Chemically disordered coordination of oxygen  

SciTech Connect (OSTI)

The origin of the deep subgap states in amorphous indium gallium zinc oxide (a-IGZO), whether intrinsic to the amorphous structure or not, has serious implications for the development of p-type transparent amorphous oxide semiconductors. We report that the deep subgap feature in a-IGZO originates from local variations in the oxygen coordination and not from oxygen vacancies. This is shown by the positive correlation between oxygen composition and subgap intensity as observed with X-ray photoelectron spectroscopy. We also demonstrate that the subgap feature is not intrinsic to the amorphous phase because the deep subgap feature can be removed by low-temperature annealing in a reducing environment. Atomistic calculations of a-IGZO reveal that the subgap state originates from certain oxygen environments associated with the disorder. Specifically, the subgap states originate from oxygen environments with a lower coordination number and/or a larger metal-oxygen separation.

Sallis, S.; Williams, D. S. [Materials Science and Engineering, Binghamton University, Binghamton, New York 13902 (United States); Butler, K. T.; Walsh, A. [Center for Sustainable Technologies and Department of Chemistry, University of Bath, Claverton Down, Bath BA2 7AY (United Kingdom); Quackenbush, N. F. [Department of Physics, Applied Physics, and Astronomy, Binghamton University, Binghamton, New York 13902 (United States); Junda, M.; Podraza, N. J. [Department of Physics and Astronomy, University of Toledo, Toledo, Ohio 43606 (United States); Fischer, D. A.; Woicik, J. C. [Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 (United States); White, B. E.; Piper, L. F. J., E-mail: lpiper@binghamton.edu [Department of Physics, Applied Physics, and Astronomy, Binghamton University, Binghamton, New York 13902 (United States); Materials Science and Engineering, Binghamton University, Binghamton, New York 13902 (United States)

2014-06-09T23:59:59.000Z

19

The influence of random indium alloy fluctuations in indium gallium nitride quantum wells on the device behavior  

SciTech Connect (OSTI)

In this paper, we describe the influence of the intrinsic indium fluctuation in the InGaN quantum wells on the carrier transport, efficiency droop, and emission spectrum in GaN-based light emitting diodes (LEDs). Both real and randomly generated indium fluctuations were used in 3D simulations and compared to quantum wells with a uniform indium distribution. We found that without further hypothesis the simulations of electrical and optical properties in LEDs such as carrier transport, radiative and Auger recombination, and efficiency droop are greatly improved by considering natural nanoscale indium fluctuations.

Yang, Tsung-Jui; Wu, Yuh-Renn, E-mail: yrwu@ntu.edu.tw [Graduate Institute of Photonics and Optoelectronics and Department of Electrical Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Shivaraman, Ravi; Speck, James S. [Department of Materials, University of California, Santa Barbara, California 93106 (United States)

2014-09-21T23:59:59.000Z

20

E-Print Network 3.0 - aluminium gallium indium Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

An advanced diffusion model to identify emergent research issues: the case of optoelectronic devices Summary: Aluminium arsenides Ge-Si alloys Avalanche photodiodes Indium...

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Surface reactivity and oxygen migration in amorphous indium-gallium-zinc oxide films annealed in humid atmosphere  

SciTech Connect (OSTI)

An isotope tracer study, i.e., {sup 18}O/{sup 16}O exchange using {sup 18}O{sub 2} and H{sub 2}{sup 18}O, was performed to determine how post-deposition annealing (PDA) affected surface reactivity and oxygen diffusivity of amorphous indium–gallium–zinc oxide (a-IGZO) films. The oxygen tracer diffusivity was very high in the bulk even at low temperatures, e.g., 200?°C, regardless of PDA and exchange conditions. In contrast, the isotope exchange rate, dominated by surface reactivity, was much lower for {sup 18}O{sub 2} than for H{sub 2}{sup 18}O. PDA in a humid atmosphere at 400?°C further suppressed the reactivity of O{sub 2} at the a-IGZO film surface, which is attributable to –OH-terminated surface formation.

Watanabe, Ken, E-mail: Watanabe.Ken@nims.go.jp [International Center for Young Scientists (ICYS-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044 (Japan)] [International Center for Young Scientists (ICYS-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044 (Japan); Lee, Dong-Hee [Optical and Electronic Materials Unit, NIMS, 1-1 Namiki, Tsukuba 305-0044 (Japan) [Optical and Electronic Materials Unit, NIMS, 1-1 Namiki, Tsukuba 305-0044 (Japan); Materials and Structures Laboratory (MSL), Tokyo Institute of Technology, Mailbox R3-4, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan); Sakaguchi, Isao; Haneda, Hajime [Optical and Electronic Materials Unit, NIMS, 1-1 Namiki, Tsukuba 305-0044 (Japan)] [Optical and Electronic Materials Unit, NIMS, 1-1 Namiki, Tsukuba 305-0044 (Japan); Nomura, Kenji [Frontier Research Center, Tokyo Institute of Technology, Mailbox S2-13, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan)] [Frontier Research Center, Tokyo Institute of Technology, Mailbox S2-13, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan); Kamiya, Toshio [Materials and Structures Laboratory (MSL), Tokyo Institute of Technology, Mailbox R3-4, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan) [Materials and Structures Laboratory (MSL), Tokyo Institute of Technology, Mailbox R3-4, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan); Materials Research Center for Element Strategy (MCES), Mailbox S2-13, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan); Hosono, Hideo [Materials and Structures Laboratory (MSL), Tokyo Institute of Technology, Mailbox R3-4, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan) [Materials and Structures Laboratory (MSL), Tokyo Institute of Technology, Mailbox R3-4, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan); Frontier Research Center, Tokyo Institute of Technology, Mailbox S2-13, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan); Materials Research Center for Element Strategy (MCES), Mailbox S2-13, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan); Ohashi, Naoki, E-mail: Ohashi.Naoki@nims.go.jp [Optical and Electronic Materials Unit, NIMS, 1-1 Namiki, Tsukuba 305-0044 (Japan) [Optical and Electronic Materials Unit, NIMS, 1-1 Namiki, Tsukuba 305-0044 (Japan); Materials Research Center for Element Strategy (MCES), Mailbox S2-13, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan)

2013-11-11T23:59:59.000Z

22

Saddle-like deformation in a dielectric elastomer actuator embedded with liquid-phase gallium-indium electrodes  

SciTech Connect (OSTI)

We introduce a dielectric elastomer actuator (DEA) composed of liquid-phase Gallium-Indium (GaIn) alloy electrodes embedded between layers of poly(dimethylsiloxane) (PDMS) and examine its mechanics using a specialized elastic shell theory. Residual stresses in the dielectric and sealing layers of PDMS cause the DEA to deform into a saddle-like geometry (Gaussian curvature K<0). Applying voltage ? to the liquid metal electrodes induces electrostatic pressure (Maxwell stress) on the dielectric and relieves some of the residual stress. This reduces the longitudinal bending curvature and corresponding angle of deflection ?. Treating the elastomer as an incompressible, isotropic, NeoHookean solid, we develop a theory based on the principle of minimum potential energy to predict the principal curvatures as a function of ?. Based on this theory, we predict a dependency of ? on ? that is in strong agreement with experimental measurements performed on a GaIn-PDMS composite. By accurately modeling electromechanical coupling in a soft-matter DEA, this theory can inform improvements in design and fabrication.

Wissman, J., E-mail: jwissman@andrew.cmu.edu [Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Finkenauer, L. [Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Deseri, L. [DICAM, Department of Mechanical, Civil and Environmental Engineering, University of Trento, via Mesiano 77 38123 Trento (Italy); TMHRI-Department of Nanomedicine, The Methodist Hospital Research Institute, 6565 Fannin St., MS B-490 Houston, Texas 77030 (United States); Mechanics, Materials and Computing Center, CEE and ME-CIT, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Majidi, C. [Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Robotics Institute and Department of Civil and Environmental Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States)

2014-10-14T23:59:59.000Z

23

Exploration of Novel Reaction Pathway for Formation of Copper Indium Gallium Diselenide: Cooperative Research and Development Final Report, CRADA Number CRD-03-121  

SciTech Connect (OSTI)

The investigation will explore a potentially low-cost method of forming CIGS for use in solar cells. Investigators from HelioVolt will work in NREL laboratories to modify and apply our tools in fabrication of the CIGS layer. Investigators from NREL will assist in preparing substrates and in compleing solar cells composed of these CIGS layers to evaluate the effectiveness of the HelioVolt processes.

van Hest, M.

2014-11-01T23:59:59.000Z

24

arsenide gallium nitride: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Lundberga,*, J. Lua , A Abstract The diffusion of indium and gallium in polycrystalline thin film Cu(In,Ga)Se2 layers has been with a larger number of vacancies, that facilitates...

25

Preparation of CIGS-based solar cells using a buffered electrodeposition bath  

DOE Patents [OSTI]

A photovoltaic cell exhibiting an overall conversion efficiency of at least 9.0% is prepared from a copper-indium-gallium-diselenide thin film. The thin film is prepared by simultaneously electroplating copper, indium, gallium, and selenium onto a substrate using a buffered electro-deposition bath. The electrodeposition is followed by adding indium to adjust the final stoichiometry of the thin film.

Bhattacharya, Raghu Nath (Littleton, CO)

2007-11-20T23:59:59.000Z

26

Long-Term Performance Data and Analysis of CIS/CIGS Modules Deployed Outdoors (Presentation)  

SciTech Connect (OSTI)

The long-term performance data of copper indium diselenide (CIS) and gallium-alloyed CIS (CIGS) photovoltaic (PV) modules are investigated to assess the reliability of this technology.

del Cueto, J. A.; Kroposki, B.; Rummel, S.; Anderberg, A.

2008-08-10T23:59:59.000Z

27

Barrier Coatings for Thin Film Solar Cells: Final Subcontract Report, September 1, 2002 -- January 30, 2008  

SciTech Connect (OSTI)

This program has involved investigations of the stability of CdTe and copper-indium-gallium-diselenide (CIGS) solar cells under damp heat conditions and effects of barrier coatings.

Olsen, L. C.

2010-03-01T23:59:59.000Z

28

EURODISPLAY 2002 631 P-64: A Comparative Study of Metal Oxide Coated Indium-tin Oxide Anodes  

E-Print Network [OSTI]

EURODISPLAY 2002 631 P-64: A Comparative Study of Metal Oxide Coated Indium-tin Oxide Anodes and Technology Clear Water Bay, Kowloon, Hong Kong Abstract Indium-tin oxide anodes capped with certain oxides-emitting diodes (OLEDs). The oxides of tin, zinc, praseodymium, yttrium, gallium, terbium and titanium have been

29

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mechanical Behavior of Indium Nanostructures Mechanical Behavior of Indium Nanostructures Print Wednesday, 26 May 2010 00:00 Indium is a key material in lead-free solder...

30

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mechanical Behavior of Indium Nanostructures Print Indium is a key material in lead-free solder applications for microelectronics due to its excellent wetting properties, extended...

31

Sandia National Laboratories: copper-indium-gallium-[di]selenide-based  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia, NREL Releasehy-drogenmaterial elementswave

32

Synthesis, characterization, and biotemplated assembly of indium nitride and indium gallium nitride nanoparticles  

E-Print Network [OSTI]

A low-temperature, ambient pressure solution synthesis of colloidal InN nanoparticles is presented. This synthesis utilizes a previously dismissed precursor and results in individual, non-aggregated nanoparticles with ...

Hsieh, Jennifer Chia-Jen

2010-01-01T23:59:59.000Z

33

Gallium interactions with Zircaloy  

E-Print Network [OSTI]

of weapons-grade plutonium (WGPu) in the United States is the conversion of weapons-grade plutonium into mixed-oxide (MOX) reactor fuel. MOX fuel fabricated in this way must be compatible with currently used nuclear fuel components. Since US WGPu contains... that gallium may have on zircaloy cladding during reactor operation. As a result of the reprocessing of spent fuel used in European nuclear programs, many studies have been conducted on the production and behavior of MOX fuel in traditional reactors [5...

West, Michael Keith

2012-06-07T23:59:59.000Z

34

This content has been downloaded from IOPscience. Please scroll down to see the full text. Download details  

E-Print Network [OSTI]

S is found as a window layer for thin film cadmium telluride (CdTe) and copper indium gallium (di)selenide based solar cells. The recent advances in CdTe/CdS thin film technology and fabrication Materials allowed CdTe/CdS solar cells to emerge as a leader in the growing market of thin film module production

Khare, Sanjay V.

35

NREL scientists develop robust, high-performance IZO transparent contact for CIGS solar cells.  

E-Print Network [OSTI]

NREL scientists develop robust, high-performance IZO transparent contact for CIGS solar cells indium gallium diselenide (CIGS) solar cell is zinc oxide (ZnO). The problem is that unprotected Zn is a lifetime-limiting problem that is currently addressed solely through encapsulation. Fundamentally improving

36

2006 Minerals Yearbook U.S. Department of the Interior  

E-Print Network [OSTI]

to develop a low-cost manufacturing process for flexible thin film copper indium gallium diselenide (CIGS's Letters from Japan Ltd., 2007). Mainstream LCDs were also trending toward larger panel sizes, which construction of the first 8th generation LCD fabrication (8G) line at the Tangjeong production complex located

37

Gallium Safety in the Laboratory  

SciTech Connect (OSTI)

A university laboratory experiment for the US Department of Energy magnetic fusion research program required a simulant for liquid lithium. The simulant choices were narrowed to liquid gallium and galinstan (Ga-In-Sn) alloy. Safety information on liquid gallium and galinstan were compiled, and the choice was made to use galinstan. A laboratory safety walkthrough was performed in the fall of 2002 to support the galinstan experiment. The experiment has been operating successfully since early 2002.

Lee C. Cadwallader

2003-06-01T23:59:59.000Z

38

Gallium Safety in the Laboratory  

SciTech Connect (OSTI)

A university laboratory experiment for the US Department of Energy magnetic fusion research program required a simulant for liquid lithium. The simulant choices were narrowed to liquid gallium and galinstan (Ga-In-Sn) alloy. Safety information on liquid gallium and galinstan were compiled, and the choice was made to use galinstan. A laboratory safety walkthrough was performed in the fall of 2002 to support the galinstan experiment. The experiment has been operating successfully since early 2002.

Cadwallader, L.C.

2003-05-07T23:59:59.000Z

39

Potential effects of gallium on cladding materials  

SciTech Connect (OSTI)

This paper identifies and examines issues concerning the incorporation of gallium in weapons derived plutonium in light water reactor (LWR) MOX fuels. Particular attention is given to the more likely effects of the gallium on the behavior of the cladding material. The chemistry of weapons grade (WG) MOX, including possible consequences of gallium within plutonium agglomerates, was assessed. Based on the calculated oxidation potentials of MOX fuel, the effect that gallium may have on reactions involving fission products and possible impact on cladding performance were postulated. Gallium transport mechanisms are discussed. With an understanding of oxidation potentials and assumptions of mechanisms for gallium transport, possible effects of gallium on corrosion of cladding were evaluated. Potential and unresolved issues and suggested research and development (R and D) required to provide missing information are presented.

Wilson, D.F.; Beahm, E.C.; Besmann, T.M.; DeVan, J.H.; DiStefano, J.R.; Gat, U.; Greene, S.R.; Rittenhouse, P.L.; Worley, B.A.

1997-10-01T23:59:59.000Z

40

P-type gallium nitride  

DOE Patents [OSTI]

Several methods have been found to make p-type gallium nitride. P-type gallium nitride has long been sought for electronic devices. N-type gallium nitride is readily available. Discovery of p-type gallium nitride and the methods for making it will enable its use in ultraviolet and blue light-emitting diodes and lasers. pGaN will further enable blue photocathode elements to be made. Molecular beam epitaxy on substrates held at the proper temperatures, assisted by a nitrogen beam of the proper energy produced several types of p-type GaN with hole concentrations of about 5{times}10{sup 11} /cm{sup 3} and hole mobilities of about 500 cm{sup 2} /V-sec, measured at 250 K. P-type GaN can be formed of unintentionally-doped material or can be doped with magnesium by diffusion, ion implantation, or co-evaporation. When applicable, the nitrogen can be substituted with other group III elements such as Al. 9 figs.

Rubin, M.; Newman, N.; Fu, T.; Ross, J.; Chan, J.

1997-08-12T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

P-type gallium nitride  

DOE Patents [OSTI]

Several methods have been found to make p-type gallium nitride. P-type gallium nitride has long been sought for electronic devices. N-type gallium nitride is readily available. Discovery of p-type gallium nitride and the methods for making it will enable its use in ultraviolet and blue light-emitting diodes and lasers. pGaN will further enable blue photocathode elements to be made. Molecular beam epitaxy on substrates held at the proper temperatures, assisted by a nitrogen beam of the proper energy produced several types of p-type GaN with hole concentrations of about 5.times.10.sup.11 /cm.sup.3 and hole mobilities of about 500 cm.sup.2 /V-sec, measured at 250.degree. K. P-type GaN can be formed of unintentionally-doped material or can be doped with magnesium by diffusion, ion implantation, or co-evaporation. When applicable, the nitrogen can be substituted with other group III elements such as Al.

Rubin, Michael (Berkeley, CA); Newman, Nathan (Montara, CA); Fu, Tracy (Berkeley, CA); Ross, Jennifer (Pleasanton, CA); Chan, James (Berkeley, CA)

1997-01-01T23:59:59.000Z

42

Local environment and composition of magnesium gallium layered...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Local environment and composition of magnesium gallium layered double hydroxides determined from solid-state 1H and 71Ga NMR Local environment and composition of magnesium gallium...

43

INDIUM--1997 37.1 By Robert D. Brown, Jr.  

E-Print Network [OSTI]

INDIUM--1997 37.1 INDIUM By Robert D. Brown, Jr. There was no known production of indium at domestic mines, and none was recovered from ores in the United States in 1997. Domestic indium production and Rhode Island, were the major producers of indium metal and indium products in 1997. Several smaller

44

Micropatterning of Proteins and Mammalian Cells on Indium Tin Oxide  

E-Print Network [OSTI]

Micropatterning of Proteins and Mammalian Cells on Indium Tin Oxide Sunny S. Shah, Michael C and electrochemical activation to create micropatterned cocultures on indium tin oxide (ITO) substrates applications in tissue engineering and biosensing. KEYWORDS: indium tin oxide · photolithography · switchable

Revzin, Alexander

45

Recovery of gallium from aluminum industry residues  

SciTech Connect (OSTI)

A procedure is proposed to recover gallium from flue dust aluminum residues produced in plants by using solid-phase extraction with a commercial polyether-type polyurethane foam (PUF). Gallium can be separated from high concentrations of aluminum, iron, nickel, titanium, vanadium, copper, zinc, sulfate, fluoride, and chloride by extraction with PUF from 3 M sulfuric acid and 3 M sodium chloride concentration medium with at least a 92% efficiency. Gallium backextraction was fast and quantitative with ethanol solution. In all recovery steps commercial-grade reagents could be used, including tap water. The recovered gallium was precipitated with sodium hydroxide solution, purified by dissolution and precipitation, calcinated, and the final oxide was 98.6% pure.

Carvalho, M.S.; Neto, K.C.M.; Nobrega, A.W.; Medeiros, J.A.

2000-01-01T23:59:59.000Z

46

Viscoelastic DampingViscoelastic Damping Characteristics of Indium-Tin/Characteristics of Indium-Tin/SiCSiC  

E-Print Network [OSTI]

1 Viscoelastic DampingViscoelastic Damping Characteristics of Indium-Tin/Characteristics of Indium-Tin Approach: · Based on past experience, indium-tin has well- characterized stiffness/damping. · Fabricate

Swan Jr., Colby Corson

47

Vacancies Ordered in Screw Form (VOSF) and Layered Indium Selenide...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Form (VOSF) and Layered Indium Selenide Thin Film Deposition by Laser Back Ablation. Vacancies Ordered in Screw Form (VOSF) and Layered Indium Selenide Thin Film Deposition by...

48

Formation of selenide, sulfide or mixed selenide-sulfide films on metal or metal coated substrates  

DOE Patents [OSTI]

A process and composition for preventing cracking in composite structures comprising a metal coated substrate and a selenide, sulfide or mixed selenide sulfide film. Specifically, cracking is prevented in the coating of molybdenum coated substrates upon which a copper, indium-gallium diselenide (CIGS) film is deposited. Cracking is inhibited by adding a Se passivating amount of oxygen to the Mo and limiting the amount of Se deposited on the Mo coating.

Eser, Erten; Fields, Shannon

2012-05-01T23:59:59.000Z

49

Modeling and simulation of CuIn{sub 1?x}Ga{sub x}Se{sub 2} based thin film solar cell  

SciTech Connect (OSTI)

In this work, CIGS (Copper Indium Gallium Diselenide) based solar cell structure has been simulated. We have been calculated short circuit current, open circuit voltage and efficiency of the cell. The thickness of the absorption layer is varied from 400 to 3000 nm, keeping the thickness of other layers unchanged. The effect of absorption layer thickness over cell performance has been analyzed and found that the efficiency increases upto 22% until the thickness of the absorption layer reaches around 2000 nm.

Kumari, S., E-mail: sarita.kumari132@gmail.com; Verma, A. S. [Department of Physics, Banasthali University, Rajasthan-304022 (India); Singh, P.; Gautam, R. [Department of Electronics and Communication, Krishna Institute of Engg. and Tech., Ghaziabad-201206 (India)

2014-04-24T23:59:59.000Z

50

Au-free Ohmic Contacts to Gallium Nitride and Graphene  

E-Print Network [OSTI]

This work deals with Au-free contact metallization schemes for gallium nitride (GaN) and graphene semiconductors. Graphene and gallium nitride are promising materials that can potentially be integrated together in the near future for high frequency...

Ravikirthi, Pradhyumna

2014-08-10T23:59:59.000Z

51

GALLIUM--2000 30.1 By Deborah A. Kramer  

E-Print Network [OSTI]

the largest application for gallium, with optoelectronic devices [mostly laser diodes and light-use application for gallium, with 63% of total consumption. Optoelectronic devices accounted for 32% of domestic% of the gallium consumed in the United States was in the form of GaAs. GaAs was manufactured into optoelectronic

52

GALLIUM--1998 29.1 By Deborah A. Kramer  

E-Print Network [OSTI]

's) were the largest application for gallium, with optoelectronic devices [mostly laser diodes and light-use application for gallium, with 52% of total consumption. Optoelectronic devices accounted for 45% of domestic% of the gallium consumed in the United States was in the form of GaAs. GaAs was manufactured into optoelectronic

53

GALLIUM--1999 29.1 By Deborah A. Kramer  

E-Print Network [OSTI]

circuits (IC's) were the largest application for gallium, with optoelectronic devices [mostly laser diodes-use application for gallium, with 52% of total consumption. Optoelectronic devices accounted for 42% of domestic% of the gallium consumed in the United States was in the form of GaAs. GaAs was manufactured into optoelectronic

54

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping the NanoscaleMechanical Behavior of Indium Nanostructures Print

55

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping the NanoscaleMechanical Behavior of Indium Nanostructures

56

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping the NanoscaleMechanical Behavior of Indium

57

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping the NanoscaleMechanical Behavior of IndiumMechanical Behavior of

58

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping the NanoscaleMechanical Behavior of IndiumMechanical Behavior

59

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping the NanoscaleMechanical Behavior of IndiumMechanical

60

Indium Corporation | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place: Eden Prairie, MinnesotaIndianapolis Power andAndIndium

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

amorphous indium-gallium-zinc oxide: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: alloy of composition correspond- ing to the metallic components of the superconduct- ing oxides respectivement. Abstract. - Previous quenching experiments on 2212...

62

Gallium nitride junction field-effect transistor  

DOE Patents [OSTI]

An all-ion implanted gallium-nitride (GaN) junction field-effect transistor (JFET) and method of making the same. Also disclosed are various ion implants, both n- and p-type, together with or without phosphorous co-implantation, in selected III-V semiconductor materials.

Zolper, John C. (Albuquerque, NM); Shul, Randy J. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

63

Vacancy-Induced Nanoscale Wire Structure in Gallium Selenide...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(nanowires) in the compound gallium selenide. In short, ordered lines of structural vacancies in the material stimulate the growth of "one-dimensional" structures less than 1...

64

Photonuclear Reaction Cross Sections for Gallium Isotopes  

E-Print Network [OSTI]

The photon induced reactions which are named as photonuclear reactions have a great importance in many field of nuclear, radiation physics and related fields. Since we have planned to perform photonuclear reaction on gallium target with bremmstrahlung photons from clinical linear accelerator in the future, the cross-sections of neutron (photo-neutron ({\\gamma},xn)) and proton (photo-proton ({\\gamma},xn)) productions after photon activation have been calculated by using TALYS 1.2 computer code in this study. The target nucleus has been considered gallium which has two stable isotopes, 69Ga and 71Ga. According to the results, we have seen that the calculations are in harmony in the limited literature values. Furthermore, the pre-equilibrium and compound process contributions to the total cross-section have been investigated.

Serkan Akkoyun; Tuncay Bayram

2014-09-08T23:59:59.000Z

65

Thermal Stability of Chelated Indium Activable Tracers  

SciTech Connect (OSTI)

The thermal stability of indium tracer chelated with organic ligands ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) was measured for reservoir temperatures of 150, 200, and 240 C. Measurements of the soluble indium concentration was made as a function of time by neutron activation analysis. From the data, approximate thermal decomposition rates were estimated. At 150 C, both chelated tracers were stable over the experimental period of 20 days. At 200 C, the InEDTA concentration remained constant for 16 days, after which the thermal decomposition occurred at a measured rate constant of k = 0.09 d{sup -1}. The thermal decomposition of InNTA at 200 C showed a first order reaction with a measured rate constant of k = 0.16 d{sup -1}. At 240 C, both indium chelated tracers showed rapid decomposition with rate constants greater than 1.8 d{sup -1}. The data indicate that for geothermal reservoir with temperatures up to about 200 C, indium chelated tracers can be used effectively for transit times of at least 20 days. These experiments were run without reservoir rock media, and do not account for concomitant loss of indium tracer by adsorption processes.

Chrysikopoulos, Costas; Kruger, Paul

1986-01-21T23:59:59.000Z

66

Standard Reference Material 1751: Gallium Melting-Point Standard  

E-Print Network [OSTI]

Standard Reference Material 1751: Gallium Melting-Point Standard Gregory F. Strouse NIST Special Publication 260-157 #12;#12;NIST Special Publication 260-157 XXXX Standard Reference Material 1751: Gallium Melting-Point Standard Gregory F. Strouse Chemical Science and Technology Laboratory Process Measurements

67

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary (crude, unrefined) gallium was recovered in 2013. Globally,  

E-Print Network [OSTI]

% of the gallium consumed was used in integrated circuits (ICs). Optoelectronic devices, which include laser diodes of the remaining gallium consumption. Optoelectronic devices were used in aerospace applications, consumer goods

68

Thermoelectric transport properties of polycrystalline titanium diselenide co-intercalated with nickel and titanium using spark plasma sintering  

SciTech Connect (OSTI)

Polycrystalline samples of nickel intercalated (0-5%) TiSe{sub 2} were attempted via solid-state reaction in evacuated quartz tubes followed by densification using a spark plasma sintering process. X-ray diffraction data indicated that mixed NiSe{sub 2} and TiSe{sub 2} phases were present after initial synthesis by solid-state reaction, but a pure TiSe{sub 2} phase was present after the spark plasma sintering. While EPMA data reveals the stoichiometry to be near 1:1.8 (Ti:Se) for all samples, comparisons of the measured bulk densities to the theoretical densities suggest that the off stoichiometry is a result of the co-intercalation of both Ni and Ti rather than Se vacancies. Due to the presence of excess Ti (0.085-0.130 per formula) in the van der Waals gap of all the samples, the sensitive electron-hole balance is offset by the additional Ti-3d electrons, leading to an increase in the thermopower (n-type) over pristine, stoichiometric TiSe{sub 2}. The effects of the co-intercalation of both Ni and Ti in TiSe{sub 2} on the structural, thermal, and electrical properties are discussed herein. - Graphical abstract: Co-intercalation of nickel and excess titanium into the van der Waals gap of TiSe{sub 2} via solid state synthesis followed by spark plasma sintering results in a systematic shift in the ratio of hole and electron carrier concentration, which is close to unity for pristine TiSe{sub 2}. This directly affects the electrical transport properties, and as the structural disorder induced by intercalation suppresses the lattice thermal conductivity, co-intercalation is an effective route to enhance the thermoelectric properties of transition metal diselenides. Highlights: Black-Right-Pointing-Pointer Single phase bulk Ni and Ti co-intercalated TiSe{sub 2} samples prepared by spark plasma sintering. Black-Right-Pointing-Pointer Density and X-ray diffraction suggest that the Ni and excess Ti are ordered in the Van der Waals gap. Black-Right-Pointing-Pointer Co-intercalation of Ni and Ti can be used to control electron-hole ratio and structural disorder.

Holgate, T.C. [Department of Energy Storage and Conversion, Technical University of Denmark, Riso Campus, 4000 Roskilde (Denmark); Zhu, S.; Zhou, M. [Department of Physics and Astronomy, Clemson University, Clemson, SC 29634 (United States); Bangarigadu-Sanasy, S.; Kleinke, H. [Department of Chemistry, University of Waterloo, Waterloo, Ontario, N2L 3G1 (Canada); He, J. [Department of Physics and Astronomy, Clemson University, Clemson, SC 29634 (United States); Tritt, T.M., E-mail: ttritt@clemson.edu [Department of Physics and Astronomy, Clemson University, Clemson, SC 29634 (United States)

2013-01-15T23:59:59.000Z

69

(Data in metric tons unless otherwise noted) Domestic Production and Use: Indium was not recovered from ores in the United States in 2008. Indium-containing  

E-Print Network [OSTI]

: Data on the quantity of secondary indium recovered from scrap were not available. Indium is most loop--from collection of scrap to production of secondary materials--now takes less than 30 days. ITO to dissolve the ITO, from which the indium is recovered. Indium recovery from tailings was thought to have

70

Cavity optomechanics in gallium phosphide microdisks  

SciTech Connect (OSTI)

We demonstrate gallium phosphide (GaP) microdisk optical cavities with intrinsic quality factors >2.8?×?10{sup 5} and mode volumes <10(?/n){sup 3}, and study their nonlinear and optomechanical properties. For optical intensities up to 8.0?×?10{sup 4} intracavity photons, we observe optical loss in the microcavity to decrease with increasing intensity, indicating that saturable absorption sites are present in the GaP material, and that two-photon absorption is not significant. We observe optomechanical coupling between optical modes of the microdisk around 1.5??m and several mechanical resonances, and measure an optical spring effect consistent with a theoretically predicted optomechanical coupling rate g{sub 0}/2??30?kHz for the fundamental mechanical radial breathing mode at 488?MHz.

Mitchell, Matthew; Barclay, Paul E., E-mail: pbarclay@ucalgary.ca [Institute for Quantum Science and Technology, University of Calgary, Calgary, Alberta T2N 1N4 (Canada); National Institute for Nanotechnology, 11421 Saskatchewan Dr. NW, Edmonton, Alberta T6G 2M9 (Canada); Hryciw, Aaron C. [National Institute for Nanotechnology, 11421 Saskatchewan Dr. NW, Edmonton, Alberta T6G 2M9 (Canada)

2014-04-07T23:59:59.000Z

71

Wideband saturable absorption in few-layer molybdenum diselenide (MoSe2) for Q-switching Yb-, Er- and Tm-doped fiber lasers  

E-Print Network [OSTI]

We fabricate a free-standing molybdenum diselenide (MoSe2) saturable absorber by embedding liquid-phase exfoliated few-layer MoSe2 flakes into a polymer film. The MoSe2-polymer composite is used to Q-switch fiber lasers based on ytterbium (Yb), erbium (Er) and thulium (Tm) gain fiber, producing trains of microsecond-duration pulses with kilohertz repetition rates at 1060 nm, 1566 nm and 1924 nm, respectively. Such operating wavelengths correspond to sub-bandgap saturable absorption in MoSe2, which is explained in the context of edge-states, building upon studies of other semiconducting transition metal dichalcogenide (TMD)-based saturable absorbers. Our work adds few-layer MoSe2 to the growing catalog of TMDs with remarkable optical properties, which offer new opportunities for photonic devices.

Woodward, R I; Runcorn, T H; Hu, G; Torrisi, F; Kelleher, E J R; Hasan, T

2015-01-01T23:59:59.000Z

72

Preparation of cuxinygazsen (X=0-2, Y=0-2, Z=0-2, N=0-3) precursor films by electrodeposition for fabricating high efficiency solar cells  

DOE Patents [OSTI]

High quality thin films of copper-indium-gallium-diselenide useful in the production of solar cells are prepared by electrodepositing at least one of the constituent metals onto a glass/Mo substrate, followed by physical vapor deposition of copper and selenium or indium and selenium to adjust the final stoichiometry of the thin film to approximately Cu(In,Ga)Se.sub.2. Using an AC voltage of 1-100 KHz in combination with a DC voltage for electrodeposition improves the morphology and growth rate of the deposited thin film. An electrodeposition solution comprising at least in part an organic solvent may be used in conjunction with an increased cathodic potential to increase the gallium content of the electrodeposited thin film.

Bhattacharya, Raghu N. (Littleton, CO); Contreras, Miguel A. (Golden, CO); Keane, James (Lakewood, CO); Tennant, Andrew L. (Denver, CO); Tuttle, John R. (Denver, CO); Ramanathan, Kannan (Lakewood, CO); Noufi, Rommel (Golden, CO)

1998-03-24T23:59:59.000Z

73

Application of ultrasound in solvent extraction of nickel and gallium  

SciTech Connect (OSTI)

The effects of ultrasound on the rate of solvent extraction of nickel with Lix 65N and Lix 70, and gallium with Kelex 100 were investigated. These solvent extraction systems are noted by their sluggish nature. Low frequency (20 kHz) ultrasound increased the rates of extraction of nickel by factors of four to seven. The ultrasound had no effect on the final chemical equilibrium. Gallium extraction rates were enhanced with the use of ultrasound by as much as a factor of 15. Again, the ultrasound had no effect on extraction equilibrium. For both nickel and gallium, the enhanced rates were attributed to increased interfacial surface area associated with ultrasonically induced cavitation and microdroplet formation. The stability of the microdroplets permitted intermittent application of ultrasound with corresponding decreases in ultrasonic energy requirements. The lowest energy consumption was observed with short (0.25 to 5 s) bursts of high power (41 to 61 W) ultrasonic inputs. The study also provided insight into the factors that affect the complex extraction of gallium from sodium aluminate solutions. The rate controlling step was found to be the dehydration of the gallate ion, Ga(OH)4, and the first complex formation between gallium and Kelex 100. Sodium was found to enhance the extraction rate up to a point, beyond which increased concentration was detrimental. Increasing aluminum concentration was found to slow extraction rates. Modifiers and diluents were shown to markedly affect extraction rates even without ultrasound. Ketone modifiers, particularly 2-undecanone, when used with Kermac 470B or Escaid 200 diluents enhanced extraction rates of gallium to the point that the use of ultrasound provided no additional benefits. The positive effects of ketone modifiers for the solvent extraction of gallium had not been previously reported.

Pesic, B.

1996-07-01T23:59:59.000Z

74

Gallium based low-interaction anions  

DOE Patents [OSTI]

The present invention provides: a composition of the formula M.sup.+x (Ga(Y).sub.4.sup.-).sub.x where M is a metal selected from the group consisting of lithium, sodium, potassium, cesium, calcium, strontium, thallium, and silver, x is an integer selected from the group consisting of 1 or 2, each Y is a ligand selected from the group consisting of aryl, alkyl, hydride and halide with the proviso that at least one Y is a ligand selected from the group consisting of aryl, alkyl and halide; a composition of the formula (R).sub.x Q.sup.+ Ga(Y).sub.4.sup.- where Q is selected from the group consisting of carbon, nitrogen, sulfur, phosphorus and oxygen, each R is a ligand selected from the group consisting of alkyl, aryl, and hydrogen, x is an integer selected from the group consisting of 3 and 4 depending upon Q, and each Y is a ligand selected from the group consisting of aryl, alkyl, hydride and halide with the proviso that at least one Y is a ligand selected from the group consisting of aryl, alkyl and halide; an ionic polymerization catalyst composition including an active cationic portion and a gallium based weakly coordinating anion; and bridged anion species of the formula M.sup.+x.sub.y [X(Ga(Y.sub.3).sub.z ].sup.-y.sub.x where M is a metal selected from the group consisting of lithium, sodium, potassium, magnesium, cesium, calcium, strontium, thallium, and silver, x is an integer selected from the group consisting of 1 or 2, X is a bridging group between two gallium atoms, y is an integer selected from the group consisting 1 and 2, z is an integer of at least 2, each Y is a ligand selected from the group consisting of aryl, alkyl, hydride and halide with the proviso that at least one Y is a ligand selected from the group consisting of aryl, alkyl and halide.

King, Wayne A. (Santa Fe, NM); Kubas, Gregory J. (Santa Fe, NM)

2000-01-01T23:59:59.000Z

75

Process for forming pure silver ohmic contacts to N- and P-type gallium arsenide materials  

DOE Patents [OSTI]

Disclosed is an improved process for manufacturing gallium arsenide semiconductor devices having as its components a n-type gallium arsenide substrate layer and a p-type gallium arsenide diffused layer. The improved process comprises forming a pure silver ohmic contact to both the diffuse layer and the substrate layer wherein the n-type layer comprises a substantially low doping carrier concentration.

Hogan, S.J.

1983-03-13T23:59:59.000Z

76

Commercialization of High Efficiency Low Cost CIGS Technology Based on Electroplating: Final Technical Progress Report, 28 September 2007 - 30 June 2009  

SciTech Connect (OSTI)

This report describes SoloPower's work as a Photovoltaic Technology Incubator awardee within the U.S. Department of Energy's Solar Energy Technologies Program. The term of this subcontract with the National Renewable Energy Laboratory was two years. The project focused on SoloPower's electrodeposition-based copper indium gallium (di)selenide (CIGS) technology. Under this subcontract, SoloPower improved the quality of its flexible metal substrates, increased the size of its solar cells from 0.5 cm2 to 120 cm2, increased the small-area cell efficiencies from near 11% to near 14%, demonstrated large-area cells, and developed a module manufacturing process.

Basol, B.

2010-08-01T23:59:59.000Z

77

Interaction of a Liquid Gallium Jet with ISTTOK Edge Plasmas  

SciTech Connect (OSTI)

The use of liquid metals as plasma facing components in tokamaks has recently experienced a renewed interest stimulated by their advantages in the development of a fusion reactor. Liquid metals have been proposed to solve problems related to the erosion and neutronic activation of solid walls submitted to high power loads allowing an efficient heat exhaust from fusion devices. Presently the most promising candidate materials are lithium and gallium. However, lithium has a short liquid state range when compared, for example, with gallium that has essentially better thermal properties and lower vapor pressure. To explore further these properties, ISTTOK tokamak is being used to test the interaction of a free flying, fully formed liquid gallium jet with the plasma. The interacting, 2.3 mm diameter, jet is generated by hydrostatic pressure and has a 2.5 m/s flow velocity. The liquid metal injector has been build to allow the positioning of the jet inside the tokamak chamber, within a 13 mm range. This paper presents the first obtained experimental results concerning the liquid gallium jet-plasma interaction. A stable jet has been obtained, which was not noticeably affected by the magnetic field transients. ISTTOK has been successfully operated with the gallium jet without degradation of the discharge or a significant plasma contamination by liquid metal. This observation is supported by spectroscopic measurements showing that gallium radiation is limited to the region around the jet. Furthermore, the power deposited on the jet has been evaluated at different radial locations and the surface temperature increase estimated.

Gomes, R. B.; Fernandes, H.; Silva, C.; Pereira, T.; Figueiredo, J.; Carvalho, B.; Soares, A.; Duarte, P.; Varandas, C. [Associacao EURATOM/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, 1049-001 Lisboa, Porugal (Portugal); Sarakovskis, A.; Lielausis, O.; Klyukin, A.; Platacis, E.; Tale, I. [Association EURATOM/University of Latvia, Institute of Solid State Physics, 8 Kengaraga Str., LV-1063 Riga (Latvia)

2008-04-07T23:59:59.000Z

78

The natural and industrial cycling of indium in the environment  

E-Print Network [OSTI]

Indium is an important metal whose production is increasing dramatically due to new uses in the rapidly growing electronics, photovoltaic, and LED industries. Little is known, however, about the natural or industrial cycling ...

White, Sarah Jane O'Connell

2012-01-01T23:59:59.000Z

79

GALLIUM--1997 29.1 By Deborah A. Kramer  

E-Print Network [OSTI]

As is manufactured into optoelectronic devices (LED's, laser diodes, photodetectors, and solar cells) and integrated consumption. Optoelectronic devices accounted for 44% of domestic consumption, and the remaining 7% was used by imports, primarily high-purity gallium from France and low-purity material from Russia. Optoelectronic

80

LCD, low-temperature soldering and compound semiconductor : the sources, market, applications and future prospects of indium in Malaysia  

E-Print Network [OSTI]

Indium is a minor but very valuable metal. Decreasing supplies of indium from refining and increasing demands from LCD, low-temperature soldering and compound semiconductors have stimulated the indium price increase ...

Yong, Foo Nun

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Self- and zinc diffusion in gallium antimonide  

SciTech Connect (OSTI)

The technological age has in large part been driven by the applications of semiconductors, and most notably by silicon. Our lives have been thoroughly changed by devices using the broad range of semiconductor technology developed over the past forty years. Much of the technological development has its foundation in research carried out on the different semiconductors whose properties can be exploited to make transistors, lasers, and many other devices. While the technological focus has largely been on silicon, many other semiconductor systems have applications in industry and offer formidable academic challenges. Diffusion studies belong to the most basic studies in semiconductors, important from both an application as well as research standpoint. Diffusion processes govern the junctions formed for device applications. As the device dimensions are decreased and the dopant concentrations increased, keeping pace with Moore's Law, a deeper understanding of diffusion is necessary to establish and maintain the sharp dopant profiles engineered for optimal device performance. From an academic viewpoint, diffusion in semiconductors allows for the study of point defects. Very few techniques exist which allow for the extraction of as much information of their properties. This study focuses on diffusion in the semiconductor gallium antimonide (GaSb). As will become clear, this compound semiconductor proves to be a powerful one for investigating both self- and foreign atom diffusion. While the results have direct applications for work on GaSb devices, the results should also be taken in the broader context of III-V semiconductors. Results here can be compared and contrasted to results in systems such as GaAs and even GaN, indicating trends within this common group of semiconductors. The results also have direct importance for ternary and quaternary semiconductor systems used in devices such as high speed InP/GaAsSb/InP double heterojunction bipolar transistors (DHBT) [Dvorak, (2001)]. Many of the findings which will be reported here were previously published in three journal articles. Hartmut Bracht was the lead author on two articles on self-diffusion studies in GaSb [Bracht, (2001), (2000)], while this report's author was the lead author on Zn diffusion results [Nicols, (2001)]. Much of the information contained herein can be found in those articles, but a more detailed treatment is presented here.

Nicols, Samuel Piers

2002-03-26T23:59:59.000Z

82

Sputtering of tin and gallium-tin clusters  

SciTech Connect (OSTI)

Tin and gallium-tin clusters have been produced by 4 keV Ar{sup +} ion bombardment of polycrystalline tin and the gallium-tin eutectic alloy and analyzed by time-of-flight mass spectrometry. The sputtered neutral species were photoionized with 193 nm (6.4 eV) excimer laser light. Neutral tin clusters containing up to 10 atoms and mixed gallium-tin clusters Ga{sub (n-m)}Sn{sub m} with n {<=} 4 for the neutrals and N {<=} 3 for the sputtered ionic species have been detected. Laser power density dependent intensity measurements, relative yields, and kinetic energy distributions have been measured. The abundance distributions of the mixed clusters have been found to be nonstatistical due to significant differences in the ionization efficiencies for clusters with equal nuclearity but different number of tin atoms. The results indicate that Ga{sub 2}Sn and Ga{sub 3}Sn like the all-gallium clusters have ionization potentials below 6.4 eV. In the case of Sn{sub 5}, Sn{sub 6}, GaSn and Ga{sub (n-m)}Sn{sub m} clusters with n=2 to 4 and m>1, the authors detect species that have sufficient internal energy to be one photon ionized despite ionization potentials that are higher 6.4 eV. The tin atom signal that is detected can be attributed to photofragmentation of dimers for both sputtering from polycrystalline tin and from the gallium-tin eutectic alloy.

Lill, T.; Calaway, W.F.; Ma, Z.; Pellin, M.J.

1994-08-01T23:59:59.000Z

83

Pair distribution function study on compression of liquid gallium  

SciTech Connect (OSTI)

Integrating a hydrothermal diamond anvil cell (HDAC) and focused high energy x-ray beam from the superconductor wiggler X17 beamline at the National Synchrotron Light Source (NSLS) at the Brookhaven National Laboratory (BNL), we have successfully collected high quality total x-ray scattering data of liquid gallium. The experiments were conducted at a pressure range from 0.1GPa up to 2GPa at ambient temperature. For the first time, pair distribution functions (PDF) for liquid gallium at high pressure were derived up to 10 {angstrom}. Liquid gallium structure has been studied by x-ray absorption (Di Cicco & Filipponi, 1993; Wei et al., 2000; Comez et al., 2001), x-ray diffraction studies (Waseda & Suzuki, 1972), and molecular dynamics simulation (Tsay, 1993; Hui et al., 2002). These previous reports have focused on the 1st nearest neighbor structure, which tells us little about the atomic arrangement outside the first shell in non- crystalline materials. This study focuses on the structure of liquid gallium and the atomic structure change due to compression. The PDF results show that the observed atomic distance of the first nearest neighbor at 2.78 {angstrom} (first G(r) peak and its shoulder at the higher Q position) is consistent with previous studies by x-ray absorption (2.76 {angstrom}, Comez et al., 2001). We have also observed that the first nearest neighbor peak position did not change with pressure increasing, while the farther peaks positions in the intermediate distance range decreased with pressure increasing. This leads to a conclusion of the possible existence of 'locally rigid units' in the liquid. With the addition of reverse Monte Carlo modeling, we have observed that the coordination number in the local rigit unit increases with pressure. The bulk modulus of liquid gallium derived from the volume compression curve at ambient temperature (300K) is 12.1(6) GPa.

Luo, Shengnian [Los Alamos National Laboratory; Yu, Tony [SUNY-SB; Chen, Jiuhua [SUNY-SB; Ehm, Lars [SUNY-SB; Guo, Quanzhong [SUNY-SB; Parise, John [SUNY-SB

2008-01-01T23:59:59.000Z

84

Indium tin oxide and indium phosphide heterojunction nanowire array solar cells  

SciTech Connect (OSTI)

Heterojunction solar cells were formed with a position-controlled InP nanowire array sputtered with indium tin oxide (ITO). The ITO not only acted as a transparent electrode but also as forming a photovoltaic junction. The devices exhibited an open-circuit voltage of 0.436?V, short-circuit current of 24.8?mA/cm{sup 2}, and fill factor of 0.682, giving a power conversion efficiency of 7.37% under AM1.5?G illumination. The internal quantum efficiency of the device was higher than that of the world-record InP cell in the short wavelength range.

Yoshimura, Masatoshi, E-mail: yoshimura@rciqe.hokudai.ac.jp; Nakai, Eiji; Fukui, Takashi [Graduate School of Information Science and Technology, and Research Center for Integrated Quantum Electronics (RCIQE), Hokkaido University, Kita 13 Nishi 8, Sapporo 060–8628 (Japan)] [Graduate School of Information Science and Technology, and Research Center for Integrated Quantum Electronics (RCIQE), Hokkaido University, Kita 13 Nishi 8, Sapporo 060–8628 (Japan); Tomioka, Katsuhiro [Graduate School of Information Science and Technology, and Research Center for Integrated Quantum Electronics (RCIQE), Hokkaido University, Kita 13 Nishi 8, Sapporo 060–8628 (Japan) [Graduate School of Information Science and Technology, and Research Center for Integrated Quantum Electronics (RCIQE), Hokkaido University, Kita 13 Nishi 8, Sapporo 060–8628 (Japan); PRESTO, Japan Science and Technology Agency (JST), Honcho Kawaguchi, 332–0012 Saitama (Japan)

2013-12-09T23:59:59.000Z

85

High-efficiency indium tin oxide/indium phosphide solar cells  

SciTech Connect (OSTI)

Improvements in the performance of indium tin oxide/indium phosphide (ITO/InP) solar cells have been achieved by using dc magnetron sputter deposited /ital n/-ITO onto an epitaxial /ital p///ital p//sup +/ structure grown on good quality commercial /ital p//sup +/ bulk substrates. The composition of the sputtering gas has been investigated and the highest efficiency cells resulted when the surface of the epilayer was exposed to an Ar/H/sub 2/ plasma before depositing the bulk of the ITO in a more typical Ar/O/sub 2/ plasma. With H/sub 2/ processing, record efficiencies of 18.9% global, 1000 W m/sup /minus/2/, 25 /degree/C (17.0% air mass zero) were achieved. Without H/sub 2/ processing, the devices exhibited lower efficiencies and were unstable. Type conversion of the InP was shown to occur and was established as being associated with the ITO (possibly due to Sn donors) rather than sputter damage. These improvements in performance have resulted from the optimization of the doping, thickness, transport, and surface properties of the /ital p/-type base, as well as from better control over the ITO deposition procedure.

Li, X.; Wanlass, M. W.; Gessert, T. A.; Emery, K. A.; Coutts, T. J.

1989-06-26T23:59:59.000Z

86

E-Print Network 3.0 - arsenide- gallium instrument Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: of gallium arsenide, a semiconductor, which is used in advanced optoelectronics, lasers, microwave circuits... , and solar cells. To determine material...

87

Neutron detection using boron gallium nitride semiconductor material  

SciTech Connect (OSTI)

In this study, we developed a new neutron-detection device using a boron gallium nitride (BGaN) semiconductor in which the B atom acts as a neutron converter. BGaN and gallium nitride (GaN) samples were grown by metal organic vapor phase epitaxy, and their radiation detection properties were evaluated. GaN exhibited good sensitivity to ?-rays but poor sensitivity to ?-rays. Moreover, we confirmed that electrons were generated in the depletion layer under neutron irradiation. This resulted in a neutron-detection signal after ?-rays were generated by the capture of neutrons by the B atoms. These results prove that BGaN is useful as a neutron-detecting semiconductor material.

Atsumi, Katsuhiro [Department of Electrical and Electronic Engineering, Graduate School of Engineering, Shizuoka University, 3-5-1 Johoku, Naka-ku, Hamamatsu 432-8561 (Japan); Inoue, Yoku; Nakano, Takayuki, E-mail: ttnakan@ipc.shizuoka.ac.jp [Department of Electrical and Materials Science, Graduate School of Engineering, Shizuoka University, 3-5-1 Johoku, Naka-ku, Hamamatsu 432-8561 (Japan); Mimura, Hidenori; Aoki, Toru [Research Institute of Electronics, Shizuoka University, 3-5-1 Johoku, Naka-ku, Hamamatsu 432-8011 (Japan)

2014-03-01T23:59:59.000Z

88

P-31 / Schlott P-31: Nodule Formation on Indium-Oxide Tin-Oxide  

E-Print Network [OSTI]

P-31 / Schlott P-31: Nodule Formation on Indium-Oxide Tin-Oxide Sputtering Targets M. Schlott, M from indium-oxide tin-oxide (ITO) targets [1]. Unfor- tunately, black growths, or nodules, commonly isostatic pressing partly reduced powder mixtures of 90 wt.% indium-oxide and 10 wt.% tin-oxide [4

89

Laser Direct Write Patterned Indium Tin Oxide Films for Photomasks and Anisotropic Resist Applications  

E-Print Network [OSTI]

Laser Direct Write Patterned Indium Tin Oxide Films for Photomasks and Anisotropic Resist bimetallic Sn/In film into a indium tin oxide layer. Sn over In films (15-120nm thick) with a 1:10 thickness mask, etch resist. 1. Introduction The transparent and conductive films like indium tin oxide (ITO

Chapman, Glenn H.

90

Two-photon photovoltaic effect in gallium arsenide Jeff Chiles,1  

E-Print Network [OSTI]

Two-photon photovoltaic effect in gallium arsenide Jichi Ma,1 Jeff Chiles,1 Yagya D. Sharma,2 214669); published September 4, 2014 The two-photon photovoltaic effect is demonstrated in gallium; (230.0250) Optoelectronics; (040.5350) Photovoltaic; (130.4310) Nonlinear. http://dx.doi.org/10.1364/OL

Fathpour, Sasan

91

Gallium/aluminum nanocomposite material for nonlinear optics and nonlinear plasmonics  

E-Print Network [OSTI]

Gallium/aluminum nanocomposite material for nonlinear optics and nonlinear plasmonics A. V penetration of gallium into an aluminum film. These composite films form mirrorlike interfaces with silica optics and active plasmonics. The material is a polycrystalline aluminum film on a silica sub- strate

Zheludev, Nikolay

92

IEEE JOURNAL OF PHOTOVOLTAICS, VOL. 2, NO. 2, APRIL 2012 123 Gallium Arsenide Solar Cell Absorption  

E-Print Network [OSTI]

IEEE JOURNAL OF PHOTOVOLTAICS, VOL. 2, NO. 2, APRIL 2012 123 Gallium Arsenide Solar Cell Absorption--Gallium arsenide, nanospheres, photovoltaic systems, whispering gallery modes (WGMs). I. INTRODUCTION THE route as the active layer is thinned [2]. Thin-film photovoltaics offer the possibility to significantly reduce

Grandidier, Jonathan

93

Synthesis and characterization of visible emission from rare-earth doped aluminum nitride, gallium nitride and gallium aluminum nitride powders and thin films  

E-Print Network [OSTI]

of the Nitrides of Aluminum and Gallium," J. Electrochem.1) 24 (1962). G. Long and L. M. Foster, "Aluminum Nitride, aRefractory for Aluminum to 2000°C," J. Am. Ceram. Soc. ,

Tao, Jonathan Huai-Tse

2010-01-01T23:59:59.000Z

94

INDIUM--2001 37.1 By Robert D. Brown, Jr.  

E-Print Network [OSTI]

smelter (Platts Metals Week, 2001c). The indium is contained in the flue dust that had accumulated for more than 50 years, until the smelter's closure in 1981. Shortly after the closure, the U.S. Environmental Protection Agency (EPA), declared the former smelter a Superfund site, under a regulation

95

Metals Production Requirements for Rapid Photovoltaics Deployment  

E-Print Network [OSTI]

If global photovoltaics (PV) deployment grows rapidly, the required input materials need to be supplied at an increasing rate. In this paper, we quantify the effect of PV deployment levels on the scale of metals production. For example, we find that if cadmium telluride {copper indium gallium diselenide} PV accounts for more than 3% {10%} of electricity generation by 2030, the required growth rates for the production of indium and tellurium would exceed historically-observed production growth rates for a large set of metals. In contrast, even if crystalline silicon PV supplies all electricity in 2030, the required silicon production growth rate would fall within the historical range. More generally, this paper highlights possible constraints to the rate of scaling up metals production for some PV technologies, and outlines an approach to assessing projected metals growth requirements against an ensemble of past growth rates from across the metals production sector. The framework developed in this paper may be...

Kavlak, Goksin; Jaffe, Robert L; Trancik, Jessika E

2015-01-01T23:59:59.000Z

96

Vacancy-Induced Nanoscale Wire Structure in Gallium Selenide Layers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II FieldVacancy-Induced Nanoscale Wire Structure in Gallium

97

(Data in metric tons unless otherwise noted) Domestic Production and Use: Indium was not recovered from ores in the United States in 2007. Indium-containing  

E-Print Network [OSTI]

of solar power. Research was underway to develop a low-cost manufacturing process for flexible CIGS solar collection of scrap to fabrication of secondary indium products. A recycler may have millions of dollars%. Mainstream LCD devices were also trending toward larger panel sizes, which require more indium per unit

98

Gallium phosphide high-temperature bipolar junction transistor  

SciTech Connect (OSTI)

Preliminary results are reported on the development of a high-temperature (> 350/sup 0/C) gallium phosphide bipolar junction transistor (BJT) for goethermal and other energy applications. This four-layer p/sup +/n/sup -/pp/sup +/ structure was fromed by liquid phase epitaxy using a supercooling technique to insure uniform nucleation of the thin layers. Magnesium was used as the p-type dopant to avoid excessive out-diffusion into the lightly doped base. By appropriate choice of electrodes, the device may also be driven as an n-channel junction field-effect transistor. The gallium phosphide BJT is observed to have a common-emitter current gain peaking in the range of 6 to 10 (for temperatures from 20/sup 0/C to 400/sup 0/C) and a room-temperature, punchthrough-limited, collector-emitter breakdown voltage of approximately -6V. Other parameters of interest include an f/sub/ = 400 KHz (at 20/sup 0/C) and a collector base leakage current = 200 ..mu..A (at 350/sup 0/C).

Zipperian, T.E.; Dawson, L.R.; Caffin, R.J.

1981-03-01T23:59:59.000Z

99

Electrodeposition of a nickel-indium alloy from an ammonium citrate electrolyte  

SciTech Connect (OSTI)

The possibility of the electrolytic deposition of a nickel-indium alloy from an ammonium citrate electrolyte for purposes of increasing the cathode current output was investigated. The alloy antifriction coating was deposited in a rectangular glass bath of an electrolyte containing indium in the forms of a sulfate and a hydroxocitrate complex and nickel in the forms of mixed ammonium and citrate complexes as well as in sulfate form. The dependence of indium content and current output of the alloy on current density and indium sulfate concentration in the electrolyte was determined. Polarization curves for alloy precipitation established that indium precipitated at more negative potentials than nickel. The effect of indium content on microhardness was also assessed. An optimum electrolyte composition, pH value, and current density were established.

Vinogradov, S.N.; Perelygin, Yu.P.

1988-05-01T23:59:59.000Z

100

Enhanced superconducting pairing interaction in indium-doped tin telluride  

SciTech Connect (OSTI)

The ferroelectric degenerate semiconductor Sn{sub 1-{delta}}Te exhibits superconductivity with critical temperatures, T{sub c}, of up to 0.3 K for hole densities of order 10{sup 21} cm{sup -3}. When doped on the tin site with greater than x{sub c} = 1.7(3)% indium atoms, however, superconductivity is observed up to 2 K, though the carrier density does not change significantly. We present specific heat data showing that a stronger pairing interaction is present for x > x{sub c} than for x < x{sub c}. By examining the effect of In dopant atoms on both T{sub c} and the temperature of the ferroelectric structural phase transition, T{sub SPT}, we show that phonon modes related to this transition are not responsible for this T{sub c} enhancement, and discuss a plausible candidate based on the unique properties of the indium impurities.

Erickson, A.S.

2010-05-03T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Enhanced superconducting pairing interaction in indium-doped tin telluride  

SciTech Connect (OSTI)

The ferroelectric degenerate semiconductor Sn{sub 1-{delta}}Te exhibits superconductivity with critical temperatures, T{sub c}, of up to 0.3 K for hole densities of order 10{sup 21} cm{sup -3}. When doped on the tin site with greater than x{sub c} = 1.7(3)% indium atoms, however, superconductivity is observed up to 2 K, though the carrier density does not change significantly. We present specific heat data showing that a stronger pairing interaction is present for x > x{sub c} than for x < x{sub c}. By examining the effect of In dopant atoms on both T{sub c} and the temperature of the ferroelectric structural phase transition, T{sub SPT}, we show that phonon modes related to this transition are not responsible for this T{sub c} enhancement, and discuss a plausible candidate based on the unique properties of the indium impurities.

Erickson, A.S.; Chu, J.-H.; /Stanford U., Appl. Phys. Dept. /Stanford U., Geballe Lab.; Toney, M.F.; Geballe, T.H.; Fisher, I.R.; /SLAC, SSRL /Stanford U., Appl. Phys. Dept. /Stanford U., Geballe Lab.

2010-02-15T23:59:59.000Z

102

Absorption of ac fields in amorphous indium-oxide films  

SciTech Connect (OSTI)

Absorption data from applied ac fields in Anderson-localized amorphous indium-oxide (In{sub x}O) films are shown to be frequency and disorder dependent. The absorption shows a roll-off at a frequency which is much lower than the electron-electron scattering rate of the material when it is in the diffusive regime. This is interpreted as evidence for discreteness of the energy spectrum of the deeply localized regime. This is consistent with recent many-body localization scenarios. As the metal-insulator transition is approached, the absorption shifts to higher frequencies. Comparing with the previously obtained results on the crystalline version of indium-oxide (In{sub 2}O{sub 3?x}) implies a considerably higher inelastic electron-phonon scattering rate in the amorphous material. The range over which the absorption versus frequency decreases may indicate that a wide distribution of localization length is a common feature in these systems.

Ovadyahu, Z. [Racah Institute of Physics, the Hebrew University, Jerusalem 91904 (Israel)

2014-08-20T23:59:59.000Z

103

Core-Shell Nanopillar Array Solar Cells using Cadmium Sulfide Coating on Indium Phosphide Nanopillars  

E-Print Network [OSTI]

Nanocrystalline dye-sensitized solar cell/copper indium3, pp. M. Grätzel, “Dye-sensitized solar cells,” Journal ofefficiency solar cell based on dye- sensitized colloidal

Tu, Bor-An Clayton

2013-01-01T23:59:59.000Z

104

Emission and spectral characteristics of electrodeless indium halide lamp  

SciTech Connect (OSTI)

The electrodeless HID lamp excited by microwave has been intensively investigated because of its long life, high efficacy and environmental aspect. This study reports excellent emission and spectral characteristics of electrodeless HID lamp containing indium halides. The authors investigate InI and InBr as ingredients, and measure the microwave excited spectra and luminous intensities of lamps which are made from spherical silica glass in 10--40 mm outer diameter and with various amounts of halides. It is well known that such indium halides in the usual metal-halide lamps have strong blue line emission at 410 and 451nm. But, in the authors` microwave excited lamps, continuous spectrum can be observed in addition in the visible region. Increasing input of power of microwave makes this continuous spectrum stronger. Below 1kW microwave input power, the spectrum of InBr lamp almost resembled the CIE standard illuminant D65. As a consequence of the spectrum, they found that the color rendering and the duv of InBr lamp were excellent as high as 95 and smaller than 0.002, respectively, in the region of 400--800W input power. The efficacy higher than 100 lm/W was further achieved at 400W. The authors confirm that the microwave excited indium halides lamps can be applicable to many fields of lighting.

Takeda, M.; Hochi, A.; Horii, S.; Matsuoka, T. [Matsushita Electric Industrial Co., Ltd., Kyoto (Japan). Lighting Research Lab.

1997-12-31T23:59:59.000Z

105

Specific interaction of fluoride ions with aluminum and gallium solvates in an ethylene glycol solutions  

SciTech Connect (OSTI)

The interaction of aluminum chloride and gallium chloride with KF in ethylene glycol solutions with F:M/sup 3 +/ mole ratios approximately equal to 2 includes a step involving the formation of fluorine-containing species, in which the fluoride ions are held in the outer sphere of ethylene glycol solvates of aluminum and gallium. Complexes based on hexacoordinate solvates predominate in the solutions of aluminum, while in the case of gallium, in contrast to aluminum, the coexistence of tetra- and hexacoordinate complexes is characteristic. The configurational equilibrium in the solutions of gallium is one of the causes of the structurization of the solutions, i.e., polymerization due to the formation of H bonds between the fluoride ions and the coordinated ethylene glycol molecules.

Petrosyants, S.P.; Tsabel', E.R.; Buslaev, Yu.A.

1986-01-01T23:59:59.000Z

106

GALLIUM--2002 29.1 References that include a section mark () are found in the Internet  

E-Print Network [OSTI]

consumed in the United States was in the form of GaAs. GaAs was manufactured into optoelectronic devices application for gallium, with 46% of total consumption. Optoelectronic devices accounted for 42% of domestic

107

Fabrication of optoelectronic microwave linear and ring resonators on a gallium arsenide substrate  

E-Print Network [OSTI]

FABRICATION OF OPTOELECTRONIC MICROWAVE LINEAR AND RING RESONATORS ON A GALLIUM ARSENIDE SUBSTRATE A Thesis by CHUN-LIANG YEH Submitted to the Office of Graduate Studies of Texas ASM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 1993 Major Subject: Electrical Engineering FABRICATION OF OPTOELECTRONIC MICROWAVE LINEAR AND RING RESONATORS ON A GALLIUM ARSENIDE SUBSTRATE A Thesis by CHUN-LIANG YEH Approved as to style and content by: Mark...

Yeh, Chun-Liang

1993-01-01T23:59:59.000Z

108

First Results of the Testing of the Liquid Gallium Jet Limiter Concept for ISTTOK  

SciTech Connect (OSTI)

The use of liquid metals as plasma facing components in tokamaks has recently experienced a renewed interest stimulated by their advantages to the development of a fusion reactor. Liquid metals have been proposed to solve problems related to the erosion and neutronic activation of solid walls submitted to high power loads allowing an efficient heat exhaustion from fusion devices. Presently the most promising materials are Lithium and Gallium. ISTTOK, a small size tokamak, will be used to test the behavior of a liquid Gallium jet in the vacuum chamber and its influence on the plasma. This paper presents a description of the conceived setup as well as experimental results. The liquid Gallium jet is generated by hydrostatic pressure and injected in a radial position close to a moveable stainless steel limiter. Both the jet and the limiter positions are variable allowing for a controlled exposure of the liquid Gallium to the edge plasma. The main components of the Gallium loop are a MHD pump, the liquid metal injector and a filtering system. The MHD pump is of the induction type, based on rotating permanent magnets. The injector is build from a stainless steel pipe ended by a shaping nozzle. A setup has been developed to introduce oxide-free Gallium inside the loop's main supply tank. Raw liquid metal is placed inside a chamber heated and degassed under high vacuum while clean Gallium is extracted from the main body of the liquefied metal. Prior to installation on the tokamak, the experimental rig has been implemented using a Pyrex tube as test chamber to investigate the stability of the Gallium jet and its break-up length for several nozzle sizes. Results are presented in this paper. This rig was also useful to assess the behavior of the overall implemented apparatus.

Gomes, R. B.; Fernandes, H.; Silva, C.; Borba, D.; Carvalho, B.; Varandas, C. [Associacao EURATOM/IST, Centro de FuSao Nuclear, Av. Rovisco Pais, 1049-001 Lisbon (Portugal); Lielausis, O.; Klyukin, A.; Platacis, E.; Mikelsons, A.; Platnieks, I. [Association EURATOM/University of Latvia, Institute of Physics, 32 Miera Str., Salaspils, LV-2169 (Latvia)

2006-12-04T23:59:59.000Z

109

NREL: Process Development and Integration Laboratory - Copper Indium  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and AchievementsResearchReliabilityand7 NovemberCapabilities TheGallium

110

Study of Magnetohydrodynamic Surface Waves on Liquid Gallium  

SciTech Connect (OSTI)

Magnetohydrodynamic (MHD) surface waves on liquid gallium are studied theoretically and experimentally in the small magnetic Reynolds number limit. A linear dispersion relation is derived when a horizontal magnetic field and a horizontal electric current is imposed. No wave damping is found in the shallow liquid limit while waves always damp in the deep liquid limit with a magnetic field parallel to the propagation direction. When the magnetic field is weak, waves are weakly damped and the real part of the dispersion is unaffected, while in the opposite limit waves are strongly damped with shortened wavelengths. In a table-top experiment, planar MHD surface waves on liquid gallium are studied in detail in the regime of weak magnetic field and deep liquid. A non-invasive diagnostic accurately measures surface waves at multiple locations by reflecting an array of lasers off the surface onto a screen, which is recorded by an Intensified-CCD camera. The measured dispersion relation is consistent with the linear theory with a reduced surface tension likely due to surface oxidation. In excellent agreement with linear theory, it is observed that surface waves are damped only when a horizontal magnetic field is imposed parallel to the propagation direction. No damping is observed under a perpendicular magnetic field. The existence of strong wave damping even without magnetic field suggests the importance of the surface oxide layer. Implications to the liquid metal wall concept in fusion reactors, especially on the wave damping and a Rayleigh-Taylor instability when the Lorentz force is used to support liquid metal layer against gravity, are discussed.

Hantao Ji; William Fox; David Pace; H.L. Rappaport

2004-05-13T23:59:59.000Z

111

Study of liquid gallium at high pressure using synchrotron x-ray  

SciTech Connect (OSTI)

Liquid gallium has been studied at high pressure up to 2 GPa and ambient temperature in a diamond anvil cell using high energy synchrotron x-ray beam. The total x-ray scattering data of liquid gallium were collected up to Q = 12 A{sup -1} and analyzed using pair distribution functions (PDF). The results indicate that the first nearest neighbor peak and second nearest neighbor (shoulder) peak of PDF in liquid gallium does not change with pressure, whereas the higher order (i.e., third and fourth) nearest neighbor peaks shift towards shorter distance with increasing pressure. Reverse Monte Carlo modeling based on the observed data shows that the coordination number in the liquid gallium increases with pressure from 10.5 at 0.3 GPa to 11.6 at 2 GPa. An atomic arrangement similar to the crystalline phase of Ga(II) with coordination number of 12 is proposed for the locally dense-packed rigid unit in liquid gallium. The volume compression data derived from the structure modeling yield a bulk modulus of 12.1(6) GPa for liquid gallium.

Yu, Tony; Guo Quanzhong; Parise, John [Department of Geosciences, Mineral Physics Institute, Stony Brook University, Stony Brook, New York 11794-2100 (United States); Chen Jiuhua [Department of Geosciences, Mineral Physics Institute, Stony Brook University, Stony Brook, New York 11794-2100 (United States); Department of Mechanical and Materials Engineering, Center for the Study of Matters at Extreme Conditions, Florida International University, Miami, Florida 33199 (United States); Ehm, Lars [Department of Geosciences, Mineral Physics Institute, Stony Brook University, Stony Brook, New York 11794-2100 (United States); National Synchrotron Light Source, Brookhaven National Laboratory, Upton, New York 11973-5000 (United States); Huang Shu [Department of Mechanical and Materials Engineering, Center for the Study of Matters at Extreme Conditions, Florida International University, Miami, Florida 33199 (United States); Luo Shengnian [Physics Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2012-06-01T23:59:59.000Z

112

High-Temperature Decomposition of Brønsted Acid Sites in Gallium-Substituted Zeolites  

SciTech Connect (OSTI)

The dehydroxylation of Broensted acid sites (BAS) in Ga-substituted zeolites was investigated at temperatures up to 850 C using X-ray absorption spectroscopy (XAS), Fourier transform infrared spectroscopy (FTIR), and mass spectrometry-temperature programmed desorption (MS-TPD). X-ray absorption near-edge spectroscopy (XANES) revealed that the majority of gallium has tetrahedral coordination even after complete dehydroxylation. The interatomic gallium-oxygen distance and gallium coordination number determined by extended X-ray absorption fine structure (EXAFS) are consistent with gallium in tetrahedral coordination at low T (< 550 C). Upon heating Ga-Beta and Ga-ZSM5 to 850 C, analysis of the EXAFS showed that 70 and 80% of the gallium was still in tetrahedral coordination. The remainder of the gallium was found to be in octahedral coordination. No trigonal Ga atoms were observed. FTIR measurements carried out at similar temperatures show that the intensity of the OH vibration due to BAS has been eliminated. MS-TPD revealed that hydrogen in addition to water evolved from the samples during dehydroxylation. This shows that dehydrogenation in addition to dehydration is a mechanism that contributes to BAS decomposition. Dehydrogenation was further confirmed by exposing the sample to hydrogen to regenerate some of the BAS as monitored by FTIR and MS-TPD.

K Al-majnouni; N Hould; W Lonergan; D Vlachos; R Lobo

2011-12-31T23:59:59.000Z

113

Patterning of indium tin oxide by projection photoablation and lift-off process for fabrication of flat-panel displays  

E-Print Network [OSTI]

Patterning of indium tin oxide by projection photoablation and lift-off process for fabrication online 25 June 2007 Indium tin oxide ITO , an important material used as a transparent conductive oxide in such fabrication. Therefore, innovations in patterning tech- nology, especially for materials such as indium tin

Jain, Kanti

114

The Electrical and Band-Gap Properties of Amorphous Zinc-Indium-Tin Oxide Thin Films  

E-Print Network [OSTI]

MRSEC The Electrical and Band-Gap Properties of Amorphous Zinc-Indium-Tin Oxide Thin Films D Science & Engineering Center For zinc-indium-tin oxide (ZITO) films, grown by pulsed-laser deposition was replaced by substitution with zinc and tin in equal molar proportions (co-substitution). All ZITO films

Shahriar, Selim

115

Femtosecond laser ablation of indium tin-oxide narrow grooves for thin film solar cells  

E-Print Network [OSTI]

Femtosecond laser ablation of indium tin-oxide narrow grooves for thin film solar cells Qiumei Bian in the fabrication and assembly of thin film solar cells. Using a femtosecond (fs) laser, we selectively removed a unique scheme to ablate the indium tin-oxide layer for the fabrication of thin film solar cells

Van Stryland, Eric

116

P-7 / D. R. Cairns P-7: Wear Resistance of Indium Tin Oxide Coatings on Polyethylene  

E-Print Network [OSTI]

P-7 / D. R. Cairns P-7: Wear Resistance of Indium Tin Oxide Coatings on Polyethylene Terephthalate The wear mechanisms of the Indium Tin Oxide (ITO) coated Polyethylene Terephthalate (PET) topsheet). The bottom substrate is typically glass and the top sheet a polyester such as Polyethylene Terephthalate (PET

Cairns, Darran

117

By Deborah A. Kramer No gallium production was reported in the McDonnell Douglas Corp. reportedly will world producers were Australia, Germany, and  

E-Print Network [OSTI]

facility in optoelectronic devices [light-emitting diodes France from stockpiled crude gallium produced, and in 1994. Although the total quantity of gallium used in optoelectronic devices increased, its percentage

118

A thermalization energy analysis of the threshold voltage shift in amorphous indium gallium zinc oxide thin film transistors under simultaneous negative gate bias and illumination  

E-Print Network [OSTI]

of the display industry as it moves from liquid crystal to organic light emitting diode technology and with requirements for larger areas and higher resolutions. A number of alternative material systems to a-Si:H have emerged, including organic semiconductors...

Flewitt, Andrew J.; Powell, M.J.

2014-01-01T23:59:59.000Z

119

Electron backscatter diffraction of plutonium-gallium alloys  

SciTech Connect (OSTI)

At Los Alamos National Laboratory a recent experimental technique has been developed to characterize reactive metals, including plutonium arid cerium, using electron backscatter diffraction (EBSD). Microstructural characterization of plutonium and its alloys by EBSD had been previously elusive primarily because of the extreme toxicity and rapid surface oxidation rate associated with plutonium metal. The experimental techniques, which included ion-sputtering the metal surface using a scanning auger microprobe (SAM) followed by vacuum transfer of the sample from the SAM to the scanning electron microscope (SEM), used to obtain electron backscatter diffraction Kikuchi patterns (EBSPs) and orientation maps for plutonium-gallium alloys are described and the initial microstructural observations based on the analysis are discussed. Combining the SEM and EBSD observations, the phase transformation behavior between the {delta} and {var_epsilon} structures was explained. This demonstrated sample preparation and characterization technique is expected to be a powerful means to further understand phase transformation behavior, orientation relationships, and texlure in the complicated plutonium alloy systems.

Boehlert, C. J. (Carl J.); Zocco, T. G. (Thomas G.); Schulze, R. K. (Roland K.); Mitchell, J. N. (Jeremy N.); Pereyra, R. A. (Ramiro A.)

2002-01-01T23:59:59.000Z

120

Change in the current-carrier concentration upon doping PbTe with gallium  

SciTech Connect (OSTI)

Upon doping PbTe with gallium, both high-resistivity samples with intrinsic conductivity and low-resistivity samples with electronic conductivity (n/sub e/ = 10/sup 18/ cm/sup -3/) are produced on the PbTe-GaTe section. A thorough investigation of the dependence of the thermo-emf of Pb/sub 1-x/Ga/sub x/Te on the excess Pb and Te side showed the presence of a wide region with intrinsic conductivity. The experimental data can be explained by the fact that impure gallium in PbTe has negative Hubbard energy and stabilizes the Fermi level almost at the center of the forbidden band. At high gallium concentrations, Ga/sub 2/Te/sub 3/ precipitates at first, and then GaTe precipitates as well. The lead forming in excess transforms Ga/sup 3 +/ to Ga/sup +/, which produces the electronic conductivity in the material.

Bushmarina, G.S.; Gruzinov, B.F.; Drabkin, I.A.; Lev, E.Ya.; Moizhes, B.Ya; Suprun, S.G.

1987-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Accomplishments | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

water. (NREL) 1991 Gallium Indium PhosphideGallium Arsenide Tandem Solar Cell: A light, highly efficient solar cell that has become the world's standard for powering...

122

Percolation of gallium dominates the electrical resistance of focused ion beam deposited metals  

SciTech Connect (OSTI)

Metal deposition through focused ion beam (FIB) based systems is thought to result in material composed of the primary metal from the metallo-organic precursor in addition to carbon, oxygen, and gallium. We determined, through electrical resistance and chemical composition measurements on a wide range of FIB deposited platinum and tungsten lines, that the gallium ion (Ga{sup +}) concentration in the metal lines plays the dominant role in controlling the electrical resistivity. Effective medium theory, based on McLachlan's formalisms, was used to describe the relationship between the Ga{sup +} concentration and the corresponding resistivity.

Faraby, H. [Department of Electrical and Computer Engineering, University of California, San Diego, La Jolla, California 92093 (United States); DiBattista, M. [Qualcomm Technologies Incorporated, San Diego, California 92121 (United States); Bandaru, P. R., E-mail: pbandaru@ucsd.edu [Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, California 92093 (United States)

2014-04-28T23:59:59.000Z

123

Results of the Gallium-Clad Phase 3 and Phase 4 tasks (canceled prior to completion)  

SciTech Connect (OSTI)

This report summarizes the results of the Gallium-Clad interactions Phase 3 and 4 tasks. Both tasks were to involve examining the out-of-pile stability of residual gallium in short fuel rods with an imposed thermal gradient. The thermal environment was to be created by an electrical heater in the center of the fuel rod and coolant flow on the rod outer cladding. Both tasks were canceled due to difficulties with fuel pellet fabrication, delays in the preparation of the test apparatus, and changes in the Fissile Materials Disposition program budget.

Morris, R.N.

1998-08-01T23:59:59.000Z

124

Synthesis of indium sulphide quantum dots in perfluoronated ionomer membrane  

SciTech Connect (OSTI)

In this paper, we demonstrate a simple and efficient method for synthesis of ?-indium sulphide (In{sub 2}S{sub 3}) nanoparticles embedded in an ionomer matrix (nafion membrane). The influence of reaction temperature on structural, compositional and optical properties of these films were analysed using X-Ray Diffraction, EDAX, UV-Vis absorption spectroscopy and photoluminescence studies. Average particle diameter was estimated using modified effective mass approximation method. Absorption spectra of In{sub 2}S{sub 3} nanoparticles show blue shift compared to bulk In{sub 2}S{sub 3}, indicating strong quantum size confinement effects. PL emission in the wavelength range 530–600 nm was recorded using a 488 nm line from an Ar{sup +} laser as the excitation source.

Sumi, R. [Centre for Nanotechnology Research, VIT University, Vellore (India); Warrier, Anita R.; Vijayan, C. [Department of Physics, Indian Institute of Technology, Chennai (India)

2014-01-28T23:59:59.000Z

125

Photoconductivity in reactively evaporated copper indium selenide thin films  

SciTech Connect (OSTI)

Copper indium selenide thin films of composition CuInSe{sub 2} with thickness of the order of 130 nm are deposited on glass substrate at a temperature of 423 ±5 K and pressure of 10{sup ?5} mbar using reactive evaporation, a variant of Gunther's three temperature method with high purity Copper (99.999%), Indium (99.999%) and Selenium (99.99%) as the elemental starting materials. X-ray diffraction (XRD) studies shows that the films are polycrystalline in nature having preferred orientation of grains along the (112) plane. The structural type of the film is found to be tetragonal with particle size of the order of 32 nm. The structural parameters such as lattice constant, particle size, dislocation density, number of crystallites per unit area and strain in the film are also evaluated. The surface morphology of CuInSe{sub 2} films are studied using 2D and 3D atomic force microscopy to estimate the grain size and surface roughness respectively. Analysis of the absorption spectrum of the film recorded using UV-Vis-NIR Spectrophotometer in the wavelength range from 2500 nm to cutoff revealed that the film possess a direct allowed transition with a band gap of 1.05 eV and a high value of absorption coefficient (?) of 10{sup 6} cm{sup ?1} at 570 nm. Photoconductivity at room temperature is measured after illuminating the film with an FSH lamp (82 V, 300 W). Optical absorption studies in conjunction with the good photoconductivity of the prepared p-type CuInSe{sub 2} thin films indicate its suitability in photovoltaic applications.

Urmila, K. S., E-mail: urmilaks7@gmail.com; Asokan, T. Namitha, E-mail: urmilaks7@gmail.com; Pradeep, B., E-mail: urmilaks7@gmail.com [Solid State Physics Laboratory, Cochin University of Science and Technology, Kochi, Kerala (India); Jacob, Rajani; Philip, Rachel Reena [Thin Film Research Laboratory, Union Christian College, Aluva, Kerala (India)

2014-01-28T23:59:59.000Z

126

Macro- and microscopic properties of strontium doped indium oxide  

SciTech Connect (OSTI)

Solid state synthesis and physical mechanisms of electrical conductivity variation in polycrystalline, strontium doped indium oxide In{sub 2}O{sub 3}:(SrO){sub x} were investigated for materials with different doping levels at different temperatures (T?=?20–300?°C) and ambient atmosphere content including humidity and low pressure. Gas sensing ability of these compounds as well as the sample resistance appeared to increase by 4 and 8 orders of the magnitude, respectively, with the doping level increase from zero up to x?=?10%. The conductance variation due to doping is explained by two mechanisms: acceptor-like electrical activity of Sr as a point defect and appearance of an additional phase of SrIn{sub 2}O{sub 4}. An unusual property of high level (x?=?10%) doped samples is a possibility of extraordinarily large and fast oxygen exchange with ambient atmosphere at not very high temperatures (100–200?°C). This peculiarity is explained by friable structure of crystallite surface. Friable structure provides relatively fast transition of samples from high to low resistive state at the expense of high conductance of the near surface layer of the grains. Microscopic study of the electro-diffusion process at the surface of oxygen deficient samples allowed estimation of the diffusion coefficient of oxygen vacancies in the friable surface layer at room temperature as 3?×?10{sup ?13}?cm{sup 2}/s, which is by one order of the magnitude smaller than that known for amorphous indium oxide films.

Nikolaenko, Y. M.; Kuzovlev, Y. E.; Medvedev, Y. V.; Mezin, N. I. [Donetsk Institute for Physics and Technology, National Academy of Sciences of Ukraine, 83114 Donetsk (Ukraine); Fasel, C.; Gurlo, A.; Schlicker, L.; Bayer, T. J. M.; Genenko, Y. A. [Institute of Materials Science, Darmstadt University of Technology, 64287 Darmstadt (Germany)

2014-07-28T23:59:59.000Z

127

Transparent and Conductive Carbon Nanotube Multilayer Thin Films Suitable as an Indium Tin Oxide Replacement  

E-Print Network [OSTI]

Transparent electrodes made from metal oxides suffer from poor flexibility and durability. Highly transparent and electrically conductive thin films based on carbon nanotubes (CNTs) were assembled as a potential indium tin oxide (ITO) replacement...

Park, Yong Tae

2012-07-16T23:59:59.000Z

128

Millimeter wave ferromagnetic resonance in gallium-substituted ?-iron oxide  

SciTech Connect (OSTI)

In millimeter wave frequency range, hexagonal ferrites with high uniaxial anisotropic magnetic fields are used as absorbers. These ferrites include M-type barium ferrite (BaFe{sub 12}O{sub 19}) and strontium ferrite (SrFe{sub 12}O{sub 19}), which have natural ferromagnetic resonant frequency range from 40 GHz to 60?GHz. However, the higher frequency range lacks suitable materials that support the higher frequency ferromagnetic resonance. A new series of gallium-substituted ?-iron oxides (?-Ga{sub x}Fe{sub 2?x}O{sub 3}) are synthesized which have ferromagnetic resonant frequencies appearing over the frequency range 30 GHz–150 GHz. The ?-Ga{sub x}Fe{sub 2?x}O{sub 3} is synthesized by the combination of reverse micelle and sol-gel techniques or the sol-gel method only. The particle sizes are observed to be smaller than 100 nm. In this paper, the free space magneto-optical approach has been employed to study these newly developed ?-Ga{sub x}Fe{sub 2?x}O{sub 3} particles in millimeter waves. This technique enables to obtain precise transmission spectra to determine the dielectric and magnetic properties of both isotropic and anisotropic ferrites in the millimeter wave frequency range from a single set of direct measurements. The transmittance and absorbance spectra of ?-Ga{sub x}Fe{sub 2?x}O{sub 3} are shown in this paper. Strong ferromagnetic resonances at different frequencies determined by the x parameter are found.

Chao, Liu, E-mail: liu.chao@tufts.edu; Afsar, Mohammed N. [Department of Electrical and Computer Engineering, Tufts University, Medford, Massachusetts 02155 (United States); Ohkoshi, Shin-ichi [Department of Chemistry, School of Science, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan)

2014-05-07T23:59:59.000Z

129

Spectroscopic Analysis of Impurity Precipitates in CdS Films  

SciTech Connect (OSTI)

Impurities in cadmium sulfide (CdS) films are a concern in the fabrication of copper (indium, gallium) diselenide (CIGS) and cadmium telluride (CdTe) photovoltaic devices. Devices incorporating chemical-bath-deposited (CBD) CdS are comparable in quality to devices incorporating purer CdS films grown using vacuum deposition techniques, despite the higher impurity concentrations typically observed in the CBD CdS films. In this paper, we summarize and review the results of Fourier transform infrared (FTIR), Auger, electron microprobe, and X-ray photoelectron spectroscopic (XPS) analyses of the impurities in CBD CdS films. We show that these impurities differ as a function of substrate type and film deposition conditions. We also show that some of these impurities exist as 10{sup 2} micron-scale precipitates.

Webb, J. D.; Keane, J.; Ribelin, R.; Gedvilas, L.; Swartzlander, A.; Ramanathan, K.; Albin, D. S.; Noufi, R.

1999-10-31T23:59:59.000Z

130

FTIR and FT-PL Spectroscopic Analysis of TPV Materials and Devices  

SciTech Connect (OSTI)

Impurities in cadmium sulfide (CdS) films are a concern in the fabrication of copper (indium, gallium) diselenide (CIGS) and cadmium telluride (CdTe) photovoltaic devices. Devices incorporating chemical-bath-deposited (CBD) CdS are comparable in quality to devices incorporating purer CdS films grown using vacuum deposition techniques, despite the higher impurity concentrations typically observed in the CBD CdS films. In this paper, we summarize and review the results of Fourier transform infrared (FTIR), Auger, electron microprobe, and X-ray photoelectron spectroscopic (XPS) analyses of the impurities in CBD CdS films. We show that these impurities differ as a function of substrate type and film deposition conditions. We also show that some of these impurities exist as 102 micron-scale precipitates.

Webb, J. D.; Gedvilas, L. M.; Olson, M. R.; Wu, X.; Duda, A.; Wanlass, M. W.; Jones, K. M.

1998-10-28T23:59:59.000Z

131

Optical, electrical, and solar energy-conversion properties of gallium arsenide nanowire-array  

E-Print Network [OSTI]

Optical, electrical, and solar energy-conversion properties of gallium arsenide nanowire, and will aid in the design and optimization of nanowire-based systems for solar energy-conversion applications, and the photoelectrochemical energy-conversion properties of GaAs nanowire arrays were evaluated in contact with one

Zhou, Chongwu

132

GALLIUM--2003 28.1 References that include a section mark () are found in the Internet  

E-Print Network [OSTI]

in the United States was in the form of GaAs. GaAs was manufactured into optoelectronic devices (LEDs, laser diodes, photodetectors, and solar cells) and ICs. ICs and optoelectronic devices each accounted for 41) and optoelectronic devices [mostly laser diodes and light- emitting diodes (LEDs)]. Estimated crude gallium

133

(Data in metric tons unless otherwise noted) Domestic Production and Use: Indium was not recovered from ores in the United States in 2009. Indium-containing  

E-Print Network [OSTI]

global indium consumption. ITO thin-film coatings were primarily used for electrically conductive ITO is deposited as a thin-film coating onto a substrate, is highly inefficient; approximately 30 and the weaker won. In December 2008, China began a 4-year, 13% subsidy program in certain agricultural regions

134

Surface modification of indium tin oxide by plasma treatment: An effective method to improve the efficiency, brightness, and reliability of organic  

E-Print Network [OSTI]

Surface modification of indium tin oxide by plasma treatment: An effective method to improve; accepted for publication 7 January 1997 We demonstrate the improvement of an indium tin oxide anode contact conductivity, and effi- ciency as a hole injector into organic materials, indium tin oxide ITO has been widely

135

Indium tin oxide single-mode waveguide modulator Ray T. Chen, Dan Robinson, Huey Lu, Lev Sadovnik, and Zonh-Zen Ho  

E-Print Network [OSTI]

Indium tin oxide single-mode waveguide modulator Ray T. Chen, Dan Robinson, Huey Lu, Lev Sadovnik containing an indium tin oxide waveguide, two holographic mirrors, two microprisms, and two ohmic contacts range of interest. The index of refraction of an indium tin oxide film can be represented by 362 / SPIE

Chen, Ray

136

Fast neutron scattering on Gallium target at 14.8 MeV  

E-Print Network [OSTI]

Benchmarking of evaluated nuclear data libraries was performed for $\\sim 14.8$ MeV neutrons on Gallium targets. The experiments were performed at China Institute of Atomic Energy(CIAE). Solid samples of natural Gallium (3.2 cm and 6.4 cm thick) were bombarded by $\\sim 14.8$ MeV neutrons and leakage neutron energy spectra were measured at 60$^{\\circ}$ and 120$^{\\circ}$. The measured spectra are rather well reproduced by MCNP-4C simulations with the CENDL-3.1, ENDF/B-VII and JENDL-4.0 evaluated nuclear data libraries, except for the inelastic contributions around $E_{n} = 10-13$ MeV. All three libraries significantly underestimate the inelastic contributions. The inelastic contributions are further studied, using the Talys simulation code and the experimental spectra are reproduced reasonably well in the whole energy range by the Talys calculation, including the inelastic contributions.

R. Han; R. Wada; Z. Chen; Y. Nie; X. Liu; S. Zhang; P. Ren; B. Jia; G. Tian; F. Luo; W. Lin; J. Liu; F. Shi; M. Huang; X. Ruan; J. Ren; Z. Zhou; H. Huang; J. Bao; K. Zhang; B. Hu

2014-11-03T23:59:59.000Z

137

Fast neutron scattering on Gallium target at 14.8 MeV  

E-Print Network [OSTI]

Benchmarking of evaluated nuclear data libraries was performed for $\\sim 14.8$ MeV neutrons on Gallium targets. The experiments were performed at China Institute of Atomic Energy(CIAE). Solid samples of natural Gallium (3.2 cm and 6.4 cm thick) were bombarded by $\\sim 14.8$ MeV neutrons and leakage neutron energy spectra were measured at 60$^{\\circ}$ and 120$^{\\circ}$. The measured spectra are rather well reproduced by MCNP-4C simulations with the CENDL-3.1, ENDF/B-VII and JENDL-4.0 evaluated nuclear data libraries, except for the inelastic contributions around $E_{n} = 10-13$ MeV. All three libraries significantly underestimate the inelastic contributions. The inelastic contributions are further studied, using the Talys simulation code and the experimental spectra are reproduced reasonably well in the whole energy range by the Talys calculation, including the inelastic contributions.

Han, R; Chen, Z; Nie, Y; Liu, X; Zhang, S; Ren, P; Jia, B; Tian, G; Luo, F; Lin, W; Liu, J; Shi, F; Huang, M; Ruan, X; Ren, J; Zhou, Z; Huang, H; Bao, J; Zhang, K; Hu, B

2014-01-01T23:59:59.000Z

138

Absorptivity of semiconductors used in the production of solar cell panels  

SciTech Connect (OSTI)

The dependence of the absorptivity of semiconductors on the thickness of the absorbing layer is studied for crystalline silicon (c-Si), amorphous silicon (a-Si), cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS), and copper gallium diselenide (CuGaSe{sub 2}, CGS). The calculations are performed with consideration for the spectral distribution of AM1.5 standard solar radiation and the absorption coefficients of the materials. It is shown that, in the region of wavelengths {lambda} = {lambda}{sub g} = hc/E{sub g}, almost total absorption of the photons in AM1.5 solar radiation is attained in c-Si at the thickness d = 7-8 mm, in a-Si at d = 30-60 {mu}m, in CdTe at d = 20-30 {mu}m, and in CIS and CGS at d = 3-4 {mu}m. The results differ from previously reported data for these materials (especially for c-Si). In previous publications, the thickness needed for the semiconductor to absorb solar radiation completely was identified with the effective light penetration depth at a certain wavelength in the region of fundamental absorption for the semiconductor.

Kosyachenko, L. A., E-mail: lakos@chv.ukrpack.net; Grushko, E. V.; Mikityuk, T. I. [Chernivtsy National University (Ukraine)

2012-04-15T23:59:59.000Z

139

An investigation of the cadmium absorption of resonance neutrons in cadmium covered indium foils  

E-Print Network [OSTI]

, Fcd was measured for indium foils in an isotropic epi-thermal neutron flux. In order to obtain an isotropic epi-thermal neutron flux, a test section was constructed utilizing three 2-curie Pu-Be neutron sources each located at an apex... of resonance neutrons absorbed by the cadmium, thus giving a larger Fcd for the thicker foils. Martin (7), however, measured F d for 29, 69, 88, and 94 mg/cm2 indium foils in graphite and found no such variation. He lists a value of 1. 09 for each foil...

Powell, James Edward

2012-06-07T23:59:59.000Z

140

Cadmium-free junction fabrication process for CuInSe.sub.2 thin film solar cells  

DOE Patents [OSTI]

The present invention provides an economical, simple, dry and controllable semiconductor layer junction forming process to make cadmium free high efficiency photovoltaic cells having a first layer comprised primarily of copper indium diselenide having a thin doped copper indium diselenide n-type region, generated by thermal diffusion with a group II(b) element such as zinc, and a halide, such as chlorine, and a second layer comprised of a conventional zinc oxide bilayer. A photovoltaic device according the present invention includes a first thin film layer of semiconductor material formed primarily from copper indium diselenide. Doping of the copper indium diselenide with zinc chloride is accomplished using either a zinc chloride solution or a solid zinc chloride material. Thermal diffusion of zinc chloride into the copper indium diselenide upper region creates the thin n-type copper indium diselenide surface. A second thin film layer of semiconductor material comprising zinc oxide is then applied in two layers. The first layer comprises a thin layer of high resistivity zinc oxide. The second relatively thick layer of zinc oxide is doped to exhibit low resistivity.

Ramanathan, Kannan V. (Lakewood, CA); Contreras, Miguel A. (Golden, CA); Bhattacharya, Raghu N. (Littleton, CA); Keane, James (Lakewood, CA); Noufi, Rommel (Golden, CA)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Strain compensation in boron-indium coimplanted laser thermal processed silicon  

E-Print Network [OSTI]

Strain compensation in boron-indium coimplanted laser thermal processed silicon Mark H. Clarka Strain in B-implanted laser thermal processed LTP silicon is reduced by coimplantation of In. Strain in the codoped layer is calculated using lattice constants measured by high-resolution x-ray diffraction

Florida, University of

142

Electrochemical study of the properties of indium in room temperature chloroaluminate molten salts  

SciTech Connect (OSTI)

The electrochemistry of indium was studied with voltammetry and chronoamperometry at glassy carbon, tungsten, and nickel electrodes in the basic and acidic aluminum chloride-1,2-dimethyl-3-propylimidazolium chloride molten salt at 27 C. In the basic melt, In(III) is complexed as [InCl{sub 5}]{sup 2{minus}}, which could be reduced to indium metal through a three-electron reduction process. The electrodeposition of indium on glassy carbon and tungsten electrodes involves progressive three-dimensional nucleation on a finite number of active sites with diffusion-controlled growth of the nuclei. The electrodeposition of indium metal on a nickel electrode entails progressive three-dimensional nucleation on a large number of active sites. The formal potentials of the In(III)/In couple in the 44.4 to 55.6 and 49.0 to 51.0 mole percent (m/o) melts are {minus}1.096 and {minus}1.009 V, respectively, vs. Al(III)Al in the 66.7 to 33.3 m/o.

Liu, J.S.Y.; Sun, I.W. [National Cheng-Kung Univ., Tainan (Taiwan, Province of China). Dept. of Chemistry

1997-01-01T23:59:59.000Z

143

Sensors and Actuators B 118 (2006) 135141 Low temperature indium oxide gas sensors  

E-Print Network [OSTI]

Sensors and Actuators B 118 (2006) 135­141 Low temperature indium oxide gas sensors M. Sucheaa rights reserved. Keywords: Metal oxide thin films; InOx; Gas sensors; Ozone 1. Introduction The interest's attractive for many areas such as transparent electrodes for solar cells and flat panel displays

144

Correlation between the Indium Tin Oxide morphology and the performances of polymer light-emitting diodes  

E-Print Network [OSTI]

: This paper reports on performance enhancement of polymer light-emitting diodes (PLEDs) based on poly(2,5-bis. Keywords : Polymer light emitting diode; Indium tin oxide; Atomic force microscopy; Rutherford backscattering spectroscopy 1. Introduction Polymer light-emitting diodes (PLEDs) have received worldwide

Paris-Sud XI, Université de

145

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 18, NO. 1, FEBRUARY 2009 103 Indium Phosphide MEMS Cantilever Resonator  

E-Print Network [OSTI]

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 18, NO. 1, FEBRUARY 2009 103 Indium Phosphide MEMS, Subramaniam Kanakaraju, Neil Goldsman, and Reza Ghodssi Abstract--We report a microelectromechanical system, microelectromechanical system (MEMS) cantilevers, pentacene, III­V MEMS. I. INTRODUCTION THE NEED to monitor

Rubloff, Gary W.

146

Gallium Lighting, LLC, Accepts Inaugural Position on the Industry Advisory Board of UC-Light Center to Help Bring Wireless Data  

E-Print Network [OSTI]

Gallium Lighting, LLC, Accepts Inaugural Position on the Industry Advisory Board of UC-Light Center to Help Bring Wireless Data Communications Capabilities to LED Lights Fayetteville, GA ­ February 10, 2011 ­Gallium Lighting, LLC, announced today it has accepted an inaugural position

147

P-28 / D. R. Cairns P-28: The Effect of Thermal Shrinkage on Indium Tin Oxide Coated  

E-Print Network [OSTI]

P-28 / D. R. Cairns P-28: The Effect of Thermal Shrinkage on Indium Tin Oxide Coated Polyethylene Tin Oxide (ITO) coated Polyethylene Terephthalate (PET) for flexible display applications

Cairns, Darran

148

Synthesis of graphene nanoribbons from amyloid templates by gallium vapor-assisted solid-phase graphitization  

SciTech Connect (OSTI)

Single- and double-layer graphene nanoribbons (GNRs) with widths of around 10?nm were synthesized directly onto an insulating substrate by solid-phase graphitization using a gallium vapor catalyst and carbon templates made of amyloid fibrils. Subsequent investigation revealed that the crystallinity, conductivity, and carrier mobility were all improved by increasing the temperature of synthesis. The carrier mobility of the GNR synthesized at 1050?°C was 0.83 cm{sup 2}/V?s, which is lower than that of mechanically exfoliated graphene. This is considered to be most likely due to electron scattering by the defects and edges of the GNRs.

Murakami, Katsuhisa, E-mail: k.murakami@bk.tsukuba.ac.jp; Dong, Tianchen; Kajiwara, Yuya; Takahashi, Teppei; Fujita, Jun-ichi [Institute of Applied Physics, Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki 305-8573 (Japan); Tsukuba Research Center for Interdisciplinary Materials Science, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki 305-8573 (Japan); Hiyama, Takaki; Takai, Eisuke; Ohashi, Gai; Shiraki, Kentaro [Institute of Applied Physics, Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki 305-8573 (Japan)

2014-06-16T23:59:59.000Z

149

Site preferences of indium impurity atoms in intermetallics having Al3Ti and Al3Zr crystal structures  

E-Print Network [OSTI]

Site preferences of indium impurity atoms in intermetallics having Al3Ti and Al3Zr crystal-04843 (Metals Program) and Praveen Sinha Fund for Physics Research. L12 DO22 DO23 Cu3Au Al3Ti Al3Zr #12;Outline · Indium was doped in samples of Al3V and Al3Ti (Al3Ti structure) and Al3Zr (Al3Zr structure) by arc

Collins, Gary S.

150

Thermoelectric properties of indium doped PbTe{sub 1-y}Se{sub y} alloys  

SciTech Connect (OSTI)

Lead telluride and its alloys are well known for their thermoelectric applications. Here, a systematic study of PbTe{sub 1-y}Se{sub y} alloys doped with indium has been done. The powder X-Ray diffraction combined with Rietveld analysis confirmed the polycrystalline single phase nature of the samples, while microstructural analysis with scanning electron microscope results showed densification of samples and presence of micrometer sized particles. The temperature dependent transport properties showed that in these alloys, indium neither pinned the Fermi level as it does in PbTe, nor acted as a resonant dopant as in SnTe. At high temperatures, bipolar effect was observed which restricted the zT to 0.66 at 800?K for the sample with 30% Se content.

Bali, Ashoka; Mallik, Ramesh Chandra, E-mail: rcmallik@physics.iisc.ernet.in [Thermoelectric Materials and Devices Laboratory, Department of Physics, Indian Institute of Science, Bangalore 560012, Karnataka (India); Wang, Heng; Snyder, G. Jeffrey [Department of Materials Science, California Institute of Technology, Pasadena, California 91125 (United States)

2014-07-21T23:59:59.000Z

151

Anionic Gallium-Based Metal;#8722;Organic Framework and Its Sorption and Ion-Exchange Properties  

SciTech Connect (OSTI)

A gallium-based metal-organic framework Ga{sub 6}(C{sub 9}H{sub 3}O{sub 6}){sub 8} {center_dot} (C{sub 2}H{sub 8}N){sub 6}(C{sub 3}H{sub 7}NO){sub 3}(H{sub 2}O){sub 26} [1, Ga{sub 6}(1,3,5-BTC){sub 8} {center_dot} 6DMA {center_dot} 3DMF {center_dot} 26H{sub 2}O], GaMOF-1; BTC = benzenetricarboxylate/trimesic acid and DMA = dimethylamine, with space group I{bar 4}3d, a = 19.611(1) {angstrom}, and V = 7953.4(6) {angstrom}{sup 3}, was synthesized using solvothermal techniques and characterized by synchrotron-based X-ray microcrystal diffraction. Compound 1 contains isolated gallium tetrahedra connected by the organic linker (BTC) forming a 3,4-connected anionic porous network. Disordered positively charged ions and solvent molecules are present in the pore, compensating for the negative charge of the framework. These positively charged molecules could be exchanged with alkali-metal ions, as is evident by an ICP-MS study. The H{sub 2} storage capacity of the parent framework is moderate with a H{sub 2} storage capacity of {approx}0.5 wt % at 77 K and 1 atm.

Banerjee, Debasis; Kim, Sun Jin; Wu, Haohan; Xu, Wenqian; Borkowski, Lauren A.; Li, Jing; Parise, John B. (Kwangju); (Rutgers); (SBU)

2012-04-30T23:59:59.000Z

152

Dynamics of formation of photoresponse in a detector structure made of gallium arsenide  

SciTech Connect (OSTI)

The influence of capture effects on the characteristics of detectors of the ionizing radiation based on semi-insulating gallium arsenide is considered. Generation of nonequilibrium electrons and holes along the entire thickness of the active region was performed under illumination with an infrared light-emitting diode with a wavelength of 0.9 {mu}m. In this case, the situation emerging in the device structure under the effect of X-ray radiation or a high-energy electron beam was simulated. It is shown that the variation in the shape of the output signal with time in this case is caused by variation in the electric field profile due to the capture of holes at deep centers in gallium arsenide. An absolutely different distribution of the electric field emerges in the structure under irradiation of a semitransparent cathode of the structure with a red light-emitting diode, emission of which penetrates into the active region for mere 1 {mu}m. In this case, the transformation of the electric field is caused by the capture of electrons. Under the prolonged effect of such radiation, a space-charge-limited current mode emerges in the device.

Ayzenshtat, G. I., E-mail: ayzen@mail.tomsknet.ru; Lelekov, M. A.; Tolbanov, O. P. [Tomsk State University (Russian Federation)

2008-04-15T23:59:59.000Z

153

Indium diffusion through high-k dielectrics in high-k/InP stacks  

SciTech Connect (OSTI)

Evidence of indium diffusion through high-k dielectric (Al{sub 2}O{sub 3} and HfO{sub 2}) films grown on InP (100) by atomic layer deposition is observed by angle resolved X-ray photoelectron spectroscopy and low energy ion scattering spectroscopy. The analysis establishes that In-out diffusion occurs and results in the formation of a PO{sub x} rich interface.

Dong, H.; Cabrera, W.; Santosh KC,; Brennan, B.; Qin, X.; McDonnell, S.; Hinkle, C. L.; Cho, K.; Chabal, Y. J. [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States)] [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States); Galatage, R. V. [Department of Electrical Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States)] [Department of Electrical Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States); Zhernokletov, D. [Department of Physics, University of Texas at Dallas, Richardson, Texas 75080 (United States)] [Department of Physics, University of Texas at Dallas, Richardson, Texas 75080 (United States); Wallace, R. M. [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States) [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States); Department of Physics, University of Texas at Dallas, Richardson, Texas 75080 (United States)

2013-08-05T23:59:59.000Z

154

Simulation assisted design of a gallium phosphide np photovoltaic junction Charles R. Allen, Jong-Hyeok Jeon , Jerry M. Woodall  

E-Print Network [OSTI]

University, 1205 W State Street, West Lafayette, IN, USA a r t i c l e i n f o Article history: Received 27 February 2010 Keywords: Gallium phosphide Solar cell Multi-junction CPV Simulation a b s t r a c with measurements of the dark and light response. The light current was measured under an illumination of air mass

Woodall, Jerry M.

155

Formation of etch pits during carbon doping of gallium arsenide with carbon tetrachloride by metalorganic vapor-phase epitaxy  

E-Print Network [OSTI]

Formation of etch pits during carbon doping of gallium arsenide with carbon tetrachloride to examine the effects of carbon tetrachloride concentration and temperature on the morphology of carbon with increasing carbon tetrachloride concentration. Step bunching and pinning was observed at a IV/III ratio

Li, Lian

156

Local environment and composition of magnesium gallium layered double hydroxides determined from solid-state 1H and 71Ga NMR spectroscopy  

SciTech Connect (OSTI)

Ordering of gallium(III) in a series of magnesium gallium layered double hydroxides (LDH’s), [Mg1-xGax(OH)2(NO3)x yH2O], was determined using solid-state 1H and 71Ga NMR spectroscopy. Depletion of Ga in these LDH’s is demonstrated to be the result of soluble [Ga(OH)4]-complexes formed during synthesis.

Petersen, Line B.; Lipton, Andrew S.; Zorin, Vadim; Nielsen, Ulla Gro

2014-11-01T23:59:59.000Z

157

The status of the solar neutrino problem and the Russian-American gallium experiment (SAGE)  

SciTech Connect (OSTI)

Perhaps the most outstanding discrepancy between prediction and measurements in current particle physics comes from the solar neutrino problem, in which a large deficit of high-energy solar neutrinos is observed. Many Nonstandard Solar Models have been invoked to try to reduce the predicted flux, but all have run into problems in trying to reproduce other measured parameters (e.g., the luminosity) of the Sun. Other explanations involving new physics such as neutrino decay and neutrino oscillations, etc. have also been proffered. Again, most of these explanations have been ruled out by either laboratory or astrophysical measurements. It appears that perhaps the most likely particle physics solution is that of matter enhanced neutrino oscillation, the Mikheyev-Smirnov-Wolfenstein (MSW) oscillations. Two new radiochemical gallium experiments, which have a low enough threshold to be sensitive to the dominant flux of low-energy p-p neutrinos, now also report a deficit and also favor a particle physics solution.

Bowles, T.J.

1994-04-01T23:59:59.000Z

158

Structure and electrical characterization of gallium arsenide nanowires with different V/III ratio growth parameters  

SciTech Connect (OSTI)

Gallium arsenide (GaAs) nanowires were grown vertically on GaAs(111)B substrate by gold-assisted using metal-organic chemical vapour deposition. Field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and conductivity atomic force microscopy (CAFM) analysis were carried out to investigate the effects of V/III ratio on structural properties and current-voltage changes in the wires. Results show that GaAs NWs grow preferably in the wurtzite crystal structure than zinc blende crystal structure with increasing V/III ratio. Additionally, CAFM studies have revealed that zincblende nanowires indicate ohmic characteristic compared to oscillation current occurred for wurtzite structures. The GaAs NWs with high quality structures are needed in solar cells technology for trapping energy that directly converts of sunlight into electricity with maximum capacity.

Muhammad, R.; Ahamad, R. [Sustainability Research Alliance, Universiti Teknologi Malaysia, 81310 Skudai, Johor (Malaysia); Ibrahim, Z.; Othaman, Z. [Physic Department, Faculty of Science, Universiti Teknologi Malaysia, 81310 Skudai, Johor (Malaysia)

2014-03-05T23:59:59.000Z

159

Outdoor Performance of a Thin-Film Gallium-Arsenide Photovoltaic Module  

SciTech Connect (OSTI)

We deployed a 855 cm2 thin-film, single-junction gallium arsenide (GaAs) photovoltaic (PV) module outdoors. Due to its fundamentally different cell technology compared to silicon (Si), the module responds differently to outdoor conditions. On average during the test, the GaAs module produced more power when its temperature was higher. We show that its maximum-power temperature coefficient, while actually negative, is several times smaller in magnitude than that of a Si module used for comparison. The positive correlation of power with temperature in GaAs is due to temperature-correlated changes in the incident spectrum. We show that a simple correction based on precipitable water vapor (PWV) brings the photocurrent temperature coefficient into agreement with that measured by other methods and predicted by theory. The low operating temperature and small temperature coefficient of GaAs give it an energy production advantage in warm weather.

Silverman, T. J.; Deceglie, M. G.; Marion, B.; Cowley, S.; Kayes, B.; Kurtz, S.

2013-06-01T23:59:59.000Z

160

Analysis of gallium arsenide deposition in a horizontal chemical vapor deposition reactor using massively parallel computations  

SciTech Connect (OSTI)

A numerical analysis of the deposition of gallium from trimethylgallium (TMG) and arsine in a horizontal CVD reactor with tilted susceptor and a three inch diameter rotating substrate is performed. The three-dimensional model includes complete coupling between fluid mechanics, heat transfer, and species transport, and is solved using an unstructured finite element discretization on a massively parallel computer. The effects of three operating parameters (the disk rotation rate, inlet TMG fraction, and inlet velocity) and two design parameters (the tilt angle of the reactor base and the reactor width) on the growth rate and uniformity are presented. The nonlinear dependence of the growth rate uniformity on the key operating parameters is discussed in detail. Efficient and robust algorithms for massively parallel reacting flow simulations, as incorporated into our analysis code MPSalsa, make detailed analysis of this complicated system feasible.

Salinger, A.G.; Shadid, J.N.; Hutchinson, S.A. [and others

1998-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Imaging the p-n junction in a gallium nitride nanowire with a scanning microwave microscope  

SciTech Connect (OSTI)

We used a broadband, atomic-force-microscope-based, scanning microwave microscope (SMM) to probe the axial dependence of the charge depletion in a p-n junction within a gallium nitride nanowire (NW). SMM enables the visualization of the p-n junction location without the need to make patterned electrical contacts to the NW. Spatially resolved measurements of S{sub 11}{sup ?}, which is the derivative of the RF reflection coefficient S{sub 11} with respect to voltage, varied strongly when probing axially along the NW and across the p-n junction. The axial variation in S{sub 11}{sup ?}? effectively mapped the asymmetric depletion arising from the doping concentrations on either side of the junction. Furthermore, variation of the probe tip voltage altered the apparent extent of features associated with the p-n junction in S{sub 11}{sup ?} images.

Imtiaz, Atif [Physical Measurement Laboratory, National Institute of Standards and Technology, Boulder, Colorado 80305 (United States); Department of Electrical, Computer, and Energy Engineering, University of Colorado, Boulder, Colorado 80309 (United States); Wallis, Thomas M.; Brubaker, Matt D.; Blanchard, Paul T.; Bertness, Kris A.; Sanford, Norman A.; Kabos, Pavel, E-mail: kabos@boulder.nist.gov [Physical Measurement Laboratory, National Institute of Standards and Technology, Boulder, Colorado 80305 (United States); Weber, Joel C. [Physical Measurement Laboratory, National Institute of Standards and Technology, Boulder, Colorado 80305 (United States); Department of Mechanical Engineering, University of Colorado, Boulder, Colorado 80309 (United States); Coakley, Kevin J. [Information Technology Laboratory, National Institute of Standards and Technology, Boulder, Colorado 80305 (United States)

2014-06-30T23:59:59.000Z

162

(Data in metric tons, unless otherwise noted) Domestic Production and Use: Indium was not recovered from ores in the United States in 2003. Two companies,  

E-Print Network [OSTI]

with the curtailment of primary refining capacity have added an extra incentive to the recovery of secondary indium be compared with Japan where the decline in domestic zinc refining has stimulated an aggressive recycling in the world economy. The report of reduced production from mines that produce byproduct indium had a negative

163

Annealing behavior of the hydrogen-vacancy complex in bulk indium phosphide crystals  

SciTech Connect (OSTI)

In order to explain the effects of hydrogen on the electrical properties of bulk indium phosphide crystals, they have performed a series of high temperature annealing studies with both undoped and iron-doped indium phosphide crystals. The samples were annealed at 900 C for 6, 36, and 72 hours, respectively, under a phosphorus overpressure of five atmospheres. Samples were characterized at 10 K by Fourier transform infrared absorption spectroscopy which allowed us to measure the concentrations of both the Fe{sup 2+} and V{sub In}-H{sub 4} defects simultaneously. Undoped samples were further characterized by the Hall effect measurements. The authors find in the iron-doped samples that the [Fe{sup 2+}]/[Fe{sup 3+}] ratio decreases gradually with increasing annealing time, indicating a reduction in the number of donors in the samples. In the undoped samples, annealing leads to a reduction of the free electron concentration accompanied by an increase in the 77 K mobility. The increase of the sample`s mobility eliminates the possibility that the reduction of the free electron concentration is due to an increase in the concentration of the compensating acceptors. The explanation for the observed behavior in all samples is that hydrogen acts as a donor and it diffuses out of the crystal during the annealing process. Based on the experimental data, they propose a calibration equation of [V{sub In}-H{sub 4}] = 4.2 {times} 10{sup 16} cm{sup {minus}1} {times} Absorbance (cm{sup {minus}1}) which is used to correlate the hydrogen-vacancy complex concentrations with the changes of the V{sub In}-H{sub 4} absorption peak in both the iron-doped and the undoped samples. Their results confirm the donor nature of the hydrogen-vacancy complex and provide strong evidence regarding the reduction mechanism of free carrier concentrations in bulk indium phosphide crystals during high temperature annealing under a phosphorus atmosphere.

Ye, Q.; Wolk, J.A.; Bourret-Courchesne, E.D. [Lawrence Berkeley National Lab., CA (United States). Materials Sciences Div.; Bliss, D.F. [Air Force Rome Lab., Hanscom AFB, MA (United States)

1998-12-31T23:59:59.000Z

164

Alternating layers of plutonium and lead or indium as surrogate for plutonium  

SciTech Connect (OSTI)

Elemental plutonium (Pu) assumes more crystal structures than other elements, plausibly due to bonding f electrons becoming non-bonding. Complex geometries hamper understanding of the transition in Pu, but calculations predict this transition in a system with simpler geometry: alternating layers either of plutonium and lead or of plutonium and indium. Here the transition occurs via a pairing-up of atoms within Pu layers. Calculations stepping through this pairing-up reveal valuable details of the transition, for example that the transition from bonding to non-bonding proceeds smoothly.

Rudin, Sven Peter [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

165

Liquid crystal terahertz phase shifters with functional indium-tin-oxide nanostructures for biasing and alignment  

SciTech Connect (OSTI)

Indium Tin Oxide (ITO) nanowhiskers (NWhs) obliquely evaporated by electron-beam glancing-angle deposition can serve simultaneously as transparent electrodes and alignment layer for liquid crystal (LC) devices in the terahertz (THz) frequency range. To demonstrate, we constructed a THz LC phase shifter with ITO NWhs. Phase shift exceeding ?/2 at 1.0 THz was achieved in a ?517??m-thick cell. The phase shifter exhibits high transmittance (?78%). The driving voltage required for quarter-wave operation is as low as 5.66?V (rms), compatible with complementary metal-oxide-semiconductor (CMOS) and thin-film transistor (TFT) technologies.

Yang, Chan-Shan [Department of Physics, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Chemical Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Tang, Tsung-Ta [Taiwan Semiconductor Manufacturing Company, Hsinchu, Taiwan (China); Pan, Ru-Pin [Department of Electrophysics, National Chiao Tung University, Hsinchu 30078, Taiwan (China); Yu, Peichen [Department of Photonics and Institute of Electro-Optical Engineering, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Pan, Ci-Ling, E-mail: clpan@phys.nthu.edu.tw [Department of Physics, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Frontier Research Center on Fundamental and Applied Science of Matters, Hsinchu 30013, Taiwan (China)

2014-04-07T23:59:59.000Z

166

Highly efficient inverted organic solar cells using amino acid modified indium tin oxide as cathode  

SciTech Connect (OSTI)

In this paper, we report that highly efficient inverted organic solar cells were achieved by modifying the surface of indium tin oxide (ITO) using an amino acid, Serine (Ser). With the modification of the ITO surface, device efficiency was significantly enhanced from 0.63% to 4.17%, accompanied with an open circuit voltage (Voc) that was enhanced from 0.30?V to 0.55?V. Ultraviolet and X-ray photoelectron spectroscopy studies indicate that the work function reduction induced by the amino acid modification resulting in the decreased barrier height at the ITO/organic interface played a crucial role in the enhanced performances.

Li, Aiyuan; Nie, Riming; Deng, Xianyu, E-mail: xydeng@hitsz.edu.cn [Research Center for Advanced Functional Materials and Devices, Shenzhen Key Laboratory of Advanced Materials, School of Materials Science and Engineering, Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055 (China); Wei, Huaixin; Li, Yanqing; Tang, Jianxin [Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Institute of Functional Nano and Soft Materials (FUNSOM), Soochow University, Suzhou 215123 (China); Zheng, Shizhao; Wong, King-Young [Department of Physics, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong (China)

2014-03-24T23:59:59.000Z

167

Analysis of indium zinc oxide thin films by laser-induced breakdown spectroscopy  

SciTech Connect (OSTI)

We have performed spectroscopic analysis of the plasma generated by Nd:YAG ({lambda} = 266 nm) laser irradiation of thin indium zinc oxide films with variable In content deposited by combinatorial pulsed laser deposition on glass substrates. The samples were irradiated in 5 x 10{sup 4} Pa argon using laser pulses of 5 ns duration and 10 mJ energy. The plasma emission spectra were recorded with an Echelle spectrometer coupled to a gated detector with different delays with respect to the laser pulse. The relative concentrations of indium and zinc were evaluated by comparing the measured spectra to the spectral radiance computed for a plasma in local thermal equilibrium. Plasma temperature and electron density were deduced from the relative intensities and Stark broadening of spectral lines of atomic zinc. Analyses at different locations on the deposited thin films revealed that the In/(In + Zn) concentration ratio significantly varies over the sample surface, from 0.4 at the borders to about 0.5 in the center of the film. The results demonstrate that laser-induced breakdown spectroscopy allows for precise and fast characterization of thin films with variable composition.

Popescu, A. C. [LP3, CNRS - Universite Aix-Marseille, 163 Ave. de Luminy, Marseille 13288 (France); National Institute for Lasers, Plasma and Radiation Physics, Magurele, Ilfov 077125 (Romania); Beldjilali, S. [LP3, CNRS - Universite Aix-Marseille, 163 Ave. de Luminy, Marseille 13288 (France); LPPMCA, Universite des Sciences et de la Technologie d'Oran, BP 1505 El Mnaouer, Oran (Algeria); Socol, G.; Mihailescu, I. N. [National Institute for Lasers, Plasma and Radiation Physics, Magurele, Ilfov 077125 (Romania); Craciun, V. [National Institute for Lasers, Plasma and Radiation Physics, Magurele, Ilfov 077125 (Romania); MAIC, University of Florida, Gainesville, FL 32611 (United States); Hermann, J. [LP3, CNRS - Universite Aix-Marseille, 163 Ave. de Luminy, Marseille 13288 (France)

2011-10-15T23:59:59.000Z

169

Leaching of indium from obsolete liquid crystal displays: Comparing grinding with electrical disintegration in context of LCA  

SciTech Connect (OSTI)

Highlights: Black-Right-Pointing-Pointer Two pre-treatment methods, prior to leaching of indium from obsolete LCD modules, were described. Black-Right-Pointing-Pointer Conventional grinding and electrical disintegration have been evaluated and compared in the context of LCA. Black-Right-Pointing-Pointer Experimental data on the leaching capacity for indium and the electricity consumption of equipment were inputted into the LCA model in order to compare the environmental performance of each method. Black-Right-Pointing-Pointer An estimate for the environmental performance was calculated as the sum of six impact categories. Black-Right-Pointing-Pointer Electrical disintegration method outperforms conventional grinding in all impact categories. - Abstract: In order to develop an effective recycling system for obsolete Liquid Crystal Displays (LCDs), which would enable both the leaching of indium (In) and the recovery of a pure glass fraction for recycling, an effective liberation or size-reduction method would be an important pre-treatment step. Therefore, in this study, two different types of liberation methods: (1) conventional grinding, and (2) electrical disintegration have been tested and evaluated in the context of Life Cycle Assessment (LCA). In other words, the above-mentioned methods were compared in order to find out the one that ensures the highest leaching capacity for indium, as well as the lowest environmental burden. One of the main findings of this study was that the electrical disintegration was the most effective liberation method, since it fully liberated the indium containing-layer, ensuring a leaching capacity of 968.5 mg-In/kg-LCD. In turn, the estimate for the environmental burden was approximately five times smaller when compared with the conventional grinding.

Dodbiba, Gjergj, E-mail: dodbiba@sys.t.u-tokyo.ac.jp [Department of System Innovation, Graduate School of Engineering, University of Tokyo (Japan); Nagai, Hiroki; Wang Lipang; Okaya, Katsunori; Fujita, Toyohisa [Department of System Innovation, Graduate School of Engineering, University of Tokyo (Japan)

2012-10-15T23:59:59.000Z

170

Crystal structure and electron microprobe analyses of a lanthanum lutetium gallium garnet  

SciTech Connect (OSTI)

Single-crystal electron microprobe analysis of a lanthanum lutetium gallium garnet has resulted in a composition of La{sub 2.37}Nd{sub 0.07}Pb{sub 0.01}Lu{sub 2.54}Cr{sub 0.01} Ga{sub 3.00}O{sub 12}. This composition gives better agreement between observed and calculated total dielectric polarizabilities than previously reported compositions (La{sub 2.26--2.32}Nd{sub 0.04}Lu{sub 2.57--2.63}Ga{sub 3.07}O{sub 12} by x-ray fluorescence and La{sub 2.655}Nd{sub 0.027}Lu{sub 2.656}Ga{sub 2.655}O{sub 12} by inductively coupled plasma analyses), and does not imply the crystal-chemically improbable presence of Lu{sup 3+} in the tetrahedral site. X-ray and neutron crystal-structure analyses have confirmed that little or no Lu resides in this site.

Parise, J.B.; Harlow, R.L.; Shannon, R.D. (Central Research and Development Department, E. I. DuPont De Nemours and Co., Experimental Station, Wilmington, Delaware 19880-0228 (United States)); Kwei, G.H. (LANSCE, MS-H805, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)); Allik, T.H. (Science Applications International Corporation, 1710 Goodridge Dr., P.O. Box 1303, McLean, Virginia 22102 (United States)); Armstrong, J.T. (Department of Geological and Planetary Sciences, California Institute of Technology, Pasadena, California 91125 (United States))

1992-09-15T23:59:59.000Z

171

More Efficient Power Conversion for EVs: Gallium-Nitride Advanced Power Semiconductor and Packaging  

SciTech Connect (OSTI)

Broad Funding Opportunity Announcement Project: Delphi is developing power converters that are smaller and more energy efficient, reliable, and cost-effective than current power converters. Power converters rely on power transistors which act like a very precisely controlled on-off switch, controlling the electrical energy flowing through an electrical circuit. Most power transistors today use silicon (Si) semiconductors. However, Delphi is using semiconductors made with a thin layer of gallium-nitride (GaN) applied on top of the more conventional Si material. The GaN layer increases the energy efficiency of the power transistor and also enables the transistor to operate at much higher temperatures, voltages, and power-density levels compared to its Si counterpart. Delphi is packaging these high-performance GaN semiconductors with advanced electrical connections and a cooling system that extracts waste heat from both sides of the device to further increase the device’s efficiency and allow more electrical current to flow through it. When combined with other electronic components on a circuit board, Delphi’s GaN power transistor package will help improve the overall performance and cost-effectiveness of HEVs and EVs.

None

2010-02-01T23:59:59.000Z

172

Investigation on properties of ultrafast switching in a bulk gallium arsenide avalanche semiconductor switch  

SciTech Connect (OSTI)

Properties of ultrafast switching in a bulk gallium arsenide (GaAs) avalanche semiconductor switch based on semi-insulating wafer, triggered by an optical pulse, were analyzed using physics-based numerical simulations. It has been demonstrated that when a voltage with amplitude of 5.2?kV is applied, after an exciting optical pulse with energy of 1??J arrival, the structure with thickness of 650??m reaches a high conductivity state within 110 ps. Carriers are created due to photons absorption, and electrons and holes drift to anode and cathode terminals, respectively. Static ionizing domains appear both at anode and cathode terminals, and create impact-generated carriers which contribute to the formation of electron-hole plasma along entire channel. When the electric field in plasma region increases above the critical value (?4?kV/cm) at which the electrons drift velocity peaks, a domain comes into being. An increase in carrier concentration due to avalanche multiplication in the domains reduces the domain width and results in the formation of an additional domain as soon as the field outside the domains increases above ?4?kV/cm. The formation and evolution of multiple powerfully avalanching domains observed in the simulations are the physical reasons of ultrafast switching. The switch exhibits delayed breakdown with the characteristics affected by biased electric field, current density, and optical pulse energy. The dependence of threshold energy of the exciting optical pulse on the biased electric field is discussed.

Hu, Long, E-mail: hulong-1226@126.com [Key Laboratory for Physical Electronics and Devices of the Ministry of Education, Xi'an Jiaotong University, Xi'an 710049 (China); Science and Technology on High Power Microwave Laboratory, Northwest Institute of Nuclear Technology, Xi'an 710024 (China); Su, Jiancang; Ding, Zhenjie; Hao, Qingsong; Yuan, Xuelin [Science and Technology on High Power Microwave Laboratory, Northwest Institute of Nuclear Technology, Xi'an 710024 (China)

2014-03-07T23:59:59.000Z

173

Electronic passivation of silicon surfaces by thin films of atomic layer deposited gallium oxide  

SciTech Connect (OSTI)

This paper proposes the application of gallium oxide (Ga{sub 2}O{sub 3}) thin films to crystalline silicon solar cells. Effective passivation of n- and p-type crystalline silicon surfaces has been achieved by the application of very thin Ga{sub 2}O{sub 3} films prepared by atomic layer deposition using trimethylgallium (TMGa) and ozone (O{sub 3}) as the reactants. Surface recombination velocities as low as 6.1?cm/s have been recorded with films less than 4.5?nm thick. A range of deposition parameters has been explored, with growth rates of approximately 0.2?Å/cycle providing optimum passivation. The thermal activation energy for passivation of the Si-Ga{sub 2}O{sub 3} interface has been found to be approximately 0.5?eV. Depassivation of the interface was observed for prolonged annealing at increased temperatures. The activation energy for depassivation was measured to be 1.9?eV.

Allen, T. G., E-mail: thomas.allen@anu.edu.au; Cuevas, A. [Research School of Engineering, Australian National University, Canberra 0200 (Australia)

2014-07-21T23:59:59.000Z

174

Investigation of buried homojunctions in p -InP formed during sputter deposition of both indium tin oxide and indium oxide  

SciTech Connect (OSTI)

Although it is apparent that direct current (dc) magnetron sputter deposition of indium tin oxide (ITO) leads to the formation of a buried homojunction in single crystal {ital p}-type InP, the actual mechanism of type conversion of the InP surface is not clear, nor is it immediately obvious how further improvements may be achieved. Previously, we have suggested that type conversion is caused by indiffusion of Sn during the ITO deposition process and additionally demonstrated that this effect is strengthened by the presence of hydrogen in the sputtering gas. Recently, however, efficiencies of almost 17% (Global) have been achieved for cells fabricated by sputter depositing In{sub 2}O{sub 3}(IO) alone, strongly suggesting that the Sn may not be an essential part of type conversion. In this work, a variety of electrical and optical techniques has been used to assess the changes at the ITO/InP and IO/InP interfaces. From these, it is concluded that several mechanisms, including passivation of acceptors by hydrogen and sputter damage,'' occur simultaneously. This analysis suggests several directions for further improvement of these devices.

Gessert, T.A.; Li, X.; Wanlass, M.W.; Nelson, A.J.; Coutts, T.J. (Solar Energy Research Institute, Golden, CO (USA))

1990-05-01T23:59:59.000Z

175

IIl-nitride nanowires and heterostructures : growth and optical properties on nanoscale  

E-Print Network [OSTI]

Gallium nitride (GaN) and indium gallium nitride (InGaN) nanowires promise potential for further improving the electricity-to-light energy conversion efficiencies in light emitting diodes due to strain relaxation, reduced ...

Zhou, Xiang, Ph. D. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

176

Broad compositional tunability of indium tin oxide nanowires grown by the vapor-liquid-solid mechanism  

SciTech Connect (OSTI)

Indium tin oxide nanowires were grown by the reaction of In and Sn with O{sub 2} at 800?°C via the vapor-liquid-solid mechanism on 1 nm Au/Si(001). We obtain Sn doped In{sub 2}O{sub 3} nanowires having a cubic bixbyite crystal structure by using In:Sn source weight ratios > 1:9 while below this we observe the emergence of tetragonal rutile SnO{sub 2} and suppression of In{sub 2}O{sub 3} permitting compositional and structural tuning from SnO{sub 2} to In{sub 2}O{sub 3} which is accompanied by a blue shift of the photoluminescence spectrum and increase in carrier lifetime attributed to a higher crystal quality and Fermi level position.

Zervos, M., E-mail: zervos@ucy.ac.cy; Giapintzakis, J. [Nanotechnology Research Centre (NRC), University of Cyprus, P.O. Box 20537, Nicosia 1678 (Cyprus); Department of Mechanical and Manufacturing Engineering, University of Cyprus, P.O. Box 20537, Nicosia 1678 (Cyprus); Mihailescu, C. N. [Nanotechnology Research Centre (NRC), University of Cyprus, P.O. Box 20537, Nicosia 1678 (Cyprus); Department of Mechanical and Manufacturing Engineering, University of Cyprus, P.O. Box 20537, Nicosia 1678 (Cyprus); National Institute for Laser, Plasma and Radiation Physics, Str. Atomistilor, P.O. Box MG-36, 077125 Magurele (Romania); Luculescu, C. R. [Department of Mechanical and Manufacturing Engineering, University of Cyprus, P.O. Box 20537, Nicosia 1678 (Cyprus); National Institute for Laser, Plasma and Radiation Physics, Str. Atomistilor, P.O. Box MG-36, 077125 Magurele (Romania); Florini, N.; Komninou, Ph.; Kioseoglou, J. [Nanostructured Materials Microscopy Group (NMMG), Department of Physics, Aristotle University of Thessaloniki, GR-54124 Thessaloniki (Greece); Othonos, A. [Nanotechnology Research Centre (NRC), University of Cyprus, P.O. Box 20537, Nicosia 1678 (Cyprus); Research Center of Ultrafast Science, Department of Physics, University of Cyprus, P.O. Box 20537, Nicosia 1678 (Cyprus)

2014-05-01T23:59:59.000Z

177

Indium doped zinc oxide nanowire thin films for antireflection and solar absorber coating applications  

SciTech Connect (OSTI)

Indium doped ZnO nanowire thin films were prepared by thermal oxidation of Zn-In metal bilayer films at 500°C. The ZnO:In nanowires are 20-100 nm in diameter and several tens of microns long. X-ray diffraction patterns confirm the formation of oxide and indicate that the films are polycrystalline, both in the as deposited and annealed states. The transmission which is <2% for the as deposited Zn-In films increases to >90% for the ZnO:In nanowire films. Significantly, the reflectance for the as deposited films is < 10% in the region between 200 to 1500 nm and < 2% for the nanowire films. Thus, the as deposited films can be used solar absorber coatings while the nanowire films are useful for antireflection applications. The growth of nanowires by this technique is attractive since it does not involve very high temperatures and the use of catalysts.

Shaik, Ummar Pasha [ACRHEM, University of Hyderabad, Hyderabad-500046 (India); Krishna, M. Ghanashyam, E-mail: mgksp@uohyd.ac.in [ACRHEM and School of Physics, University of Hyderabad, Hyderabad-500046 (India)

2014-04-24T23:59:59.000Z

178

Spray coated indium-tin-oxide-free organic photodiodes with PEDOT:PSS anodes  

SciTech Connect (OSTI)

In this paper we report on Indium Tin Oxide (ITO)-free spray coated organic photodiodes with an active layer consisting of a poly(3-hexylthiophen) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) blend and patterned poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) electrodes. External quantum efficiency and current voltage characteristics under illuminated and dark conditions as well as cut-off frequencies for devices with varying active and hole conducting layer thicknesses were measured in order to characterize the fabricated devices. 60% quantum efficiency as well as nearly four orders of magnitude on-off ratios have been achieved. Those values are comparable with standard ITO devices.

Schmidt, Morten, E-mail: morten.schmidt@nano.ei.tum.de; Falco, Aniello; Loch, Marius; Lugli, Paolo; Scarpa, Giuseppe [Institute for Nanoelectronics, Technical University of Munich, Arcisstr. 21, 80333 Munich (Germany)

2014-10-15T23:59:59.000Z

179

Optimisation of the material properties of indium tin oxide layers for use in organic photovoltaics  

SciTech Connect (OSTI)

The influence of indium tin oxide [(In{sub 2}O{sub 3}:Sn), ITO] material properties on the output performance of organic photovoltaic (OPV) devices has been modelled and investigated. In particular, the effect of altering carrier concentration (n), thickness (t), and mobility (?{sub e}) in ITO films and their impact on the optical performance, parasitic resistances and overall efficiency in OPVs was studied. This enables optimal values of these parameters to be calculated for solar cells made with P3HT:PC{sub 61}BM and PCPDTBT:PC{sub 71}BM active layers. The optimal values of n, t and ?{sub e} are not constant between different OPV active layers and depend on the absorption spectrum of the underlying active layer material system. Consequently, design rules for these optimal values as a function of donor bandgap in bulk-heterojunction active layers have been formulated.

Doggart, P.; Bristow, N.; Kettle, J., E-mail: j.kettle@bangor.ac.uk [School of Electronic Engineering, Bangor University, Dean St., Bangor, Gwynedd, Wales LL57 1UT (United Kingdom)

2014-09-14T23:59:59.000Z

180

Study of indium and solder bumps for the BTeV Pixel Detector  

SciTech Connect (OSTI)

The pixel detector proposed for the BTeV experiment at the Fermilab Tevatron will use bump-bonding technology based on either Indium or Pb/Sn solder to connect the front-end readout chips to the silicon pixel sensors. We have studied the strength of the bumps by visual inspection of the bumps bonding silicon sensor modules to dummy chips made out of glass. The studies were done before and after thermal cycles, exposed to intense irradiation, and with the assemblies glued to a graphite substrate. We have also carried out studies on effects of temperature changes on both types of bump bonds by observing the responses of single-chip pixel detectors to an Sr{sup 90} source. We report the results from these studies and our plan to measure the effect of cryogenic temperatures on the bumps.

Simon W Kwan et al.

2003-11-05T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Appearance of acute gouty arthritis on indium-111-labeled leukocyte scintigraphy  

SciTech Connect (OSTI)

Indium-111-labeled leukocyte scintigraphy was performed on a 66-yr-old male with polyarticular acute gouty arthritis. Images revealed intense labeled leukocyte accumulation in a pattern indistinguishable from septic arthritis, in both knees and ankles, and the metatarsophalangeal joint of both great toes, all of which were involved in the acute gouty attack. Joint aspirate as well as blood cultures were reported as no growth; the patient was treated with intravenous colchicine and ACTH for 10 days with dramatic improvement noted. Labeled leukocyte imaging, repeated 12 days after the initial study, revealed near total resolution of joint abnormalities, concordant with the patient's clinical improvement. This case demonstrates that while acute gouty arthritis is a potential pitfall in labeled leukocyte imaging, in the presence of known gout, it may provide a simple, objective, noninvasive method of evaluating patient response to therapy.

Palestro, C.J.; Vega, A.; Kim, C.K.; Swyer, A.J.; Goldsmith, S.J. (Mt. Sinai Medical Center, New York, NY (USA))

1990-05-01T23:59:59.000Z

182

(Data in metric tons, unless otherwise noted) Domestic Production and Use: No indium was recovered from ores in the United States in 1997. Domestically  

E-Print Network [OSTI]

--United States: 1993 1994 1995 1996 1997e Production, refinery -- -- -- -- -- Imports for consumption 73.4 70 for the indium market remains promising. World Refinery Production, Reserves, and Reserve Base: Refinery

183

DuPont Technology Breaks Away From Glass | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

technology that will let manufacturers of copper indium gallium selenide, or CIGS, solar cells and organic light emitting diodes, or OLED, displays protect products with...

184

Sandia National Laboratories: Sandia Develops a Synthesis of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Science, News, News & Events, Office of Science, Research & Capabilities, Solid-State Lighting White light-emitting diodes (LEDs) based on blue indium-gallium-nitride...

185

Shear strain mediated magneto-electric effects in composites of piezoelectric lanthanum gallium silicate or tantalate and ferromagnetic alloys  

SciTech Connect (OSTI)

Shear strain mediated magneto-electric (ME) coupling is studied in composites of piezoelectric Y-cut lanthanum gallium silicate (LGS) or tantalate (LGT) and ferromagnetic Fe-Co-V alloys. It is shown that extensional strain does not result in ME effects in these layered composites. Under shear strain generated by an ac and dc bias magnetic fields along the length and width of the sample, respectively, strong ME coupling is measured at low-frequencies and at mechanical resonance. A model is discussed for the ME effects. These composites of Y-cut piezoelectrics and ferromagnetic alloys are of importance for shear strain based magnetic field sensors.

Sreenivasulu, G.; Piskulich, E.; Srinivasan, G., E-mail: srinivas@oakland.edu [Physics Department, Oakland University, Rochester, Michigan 48409 (United States); Qu, P.; Qu, Hongwei [Electrical and Computer Engineering, Oakland University, Rochester, Michigan 48309 (United States); Petrov, V. M. [Institute of Electronic Information Systems, Novgorod State University, Veliky Novgorod (Russian Federation); Fetisov, Y. K. [Moscow State Technical University of Radio Engineering, Electronics and Automation, Moscow 19454 (Russian Federation); Nosov, A. P. [Institute of Metal Physics, Ural Division of Russian Academy of Sciences, 18 S. Kovalevskaya St, Ekaterinburg 620990 (Russian Federation)

2014-07-21T23:59:59.000Z

186

Effect of temperature and rare-earth doping on charge-carrier mobility in indium-monoselenide crystals  

SciTech Connect (OSTI)

In the temperature range T = 77-600 K, the dependence of the charge-carrier mobility ({mu}) on the initial dark resistivity is experimentally investigated at 77 K ({rho}d{sub 0}), as well as on the temperature and the level (N) of rare-earth doping with such elements as gadolinium (Gd), holmium (Ho), and dysprosium (Dy) in n-type indium-monoselenide (InSe) crystals. It is established that the anomalous behavior of the dependences {mu}(T), {mu}({rho}d{sub 0}), and {mu}(N) found from the viewpoint of the theory of charge-carrier mobility in crystalline semiconductors is related, first of all, to partial disorder in indium-monoselenide crystals and can be attributed to the presence of random drift barriers in the free energy bands.

Abdinov, A. Sh., E-mail: abdinov-axmed@yandex.ru [Baku State University (Azerbaijan); Babayeva, R. F., E-mail: Babaeva-Rena@yandex.ru [Azerbaijan State Economic University (Azerbaijan); Amirova, S. I.; Rzayev, R. M. [Baku State University (Azerbaijan)] [Baku State University (Azerbaijan)

2013-08-15T23:59:59.000Z

187

The reaction of carbon tetrachloride with gallium arsenide ,,001... L. Li., S, Gan, B.-K. Han, H. Qi, and R. F. Hicksa)  

E-Print Network [OSTI]

The reaction of carbon tetrachloride with gallium arsenide ,,001... L. Li., S, Gan, B.-K. Han, H, California 90095 Received 26 June 1997; accepted for publication 30 December 1997 Carbon tetrachloride of steps during the vapor-phase epitaxial growth of III­V compound semiconductors.3,4 Carbon tetrachloride

Li, Lian

188

Measurement of the solar neutrino capture rate with gallium metal, part III  

SciTech Connect (OSTI)

The Russian-American experiment SAGE began to measure the solar neutrino capture rate with a target of gallium metal in December 1989. Measurements have continued with only a few brief interruptions since that time. In this article we present the experimental improvements in SAGE since its last published data summary in December 2001. Assuming the solar neutrino production rate was constant during the period of data collection, combined analysis of 168 extractions through December 2007 gives a capture rate of solar neutrinos with energy more than 233 keY of 65.4{sup +3.1}{sub 3.0} (stat) {sup +2.6}{sub -2.8} (syst) SNU. The weighted average of the results of all three Ga solar neUlrino experiments, SAGE, Gallex, and GNO, is now 66.1 {+-} 3.1 SNU, where statistical and systematic uncertainties have been combined in quadrature. During the recent period of data collection a new test of SAGE was made with a reactor-produced {sup 37}Ar neutrino source. The ratio of observed to calculated rates in this experiment, combined with the measured rates in the three prior {sup 51}Cr neutrino-source experiments with Ga, is 0.88 {+-} 0.05. A probable explanation for this low result is that the cross section for neutrino capture by the two lowest-lying excited states in {sup 71}Ge has been overestimated. If we assume these cross sections are zero, then the standard solar model including neutrino oscillations predicts a total capture rate in Ga in the range of 63--67 SNU with an uncertainly of about 5%, in good agreement with experiment. We derive the current value of the pp neutrino flux produced in the Sun to be {phi}{sup {circle_dot}}{sub pp} = (6.1 {+-} 0.8) x 10{sup 10}/(cm{sup 2} s), which agrees well with the flux predicted by the standard solar model. Finally, we make several tests and show that the data are consistent with the assumption that the solar neutrino production rate is constant in time.

Elliott, Steven Ray [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

189

Ultra thin indium tin oxide films on various substrates by pulsed laser deposition  

SciTech Connect (OSTI)

Indium Tin Oxide (ITO) thin films with low resistivities of 0.1--0.2 m{Omega}-cm were deposited on various substrates such as YSZ, glass, and ZnO buffered glass by pulsed laser deposition (PLD). The X-ray rocking curve of crystalline (200) ITO films grown on (100) YSZ had a FWHM as narrow as 0.08{degree}. ITO films grown on ZnO (0001) buffered glass had an single (222) orientation and the X-ray rocking curve had a FWHM of 2.1{degree}. Ultrathin ITO films of 3.6nm were fabricated on YSZ and their electrical properties were measured from 10K--300K. ITO films fabricated on ZnO buffered glass and bare glass were characterized by Hall effect measurements as a function of temperature. The results indicate that the resistivity of ITO films grown by PLD does not depend on the orientation or the structure of the thin film. The resistivity is dominated by impurity scattering in the range of 10K--300K. The authors show that ZnO/glass is a good alternative to bare glass for producing commercial ITO films.

Sun, X.W.; Kwok, H.S. [Hong Kong Univ. of Science and Technology, Kowloon (Hong Kong). Dept. of Electrical and Electronic Engineering; Kim, D.H. [LG Electronics, Seoul (Korea, Republic of)

1998-12-31T23:59:59.000Z

190

Performance enhancement of organic light-emitting diodes by chlorine plasma treatment of indium tin oxide  

SciTech Connect (OSTI)

The characteristics of green phosphorescent organic light-emitting diodes (OLEDs) fabricated on ITO/glass substrates pretreated with low-energy O{sub 2} and Cl{sub 2} plasma were compared. At 20 mA/cm{sup 2}, the OLEDs with O{sub 2} and Cl{sub 2} plasma-treated indium tin oxide (ITO) had voltages of 9.6 and 7.6 eV, and brightness of 9580 and 12380 cd/m{sup 2}, respectively. At {approx}10{sup 4} cd/m{sup 2}, the latter had a 30% higher external quantum efficiency and a 74% higher power efficiency. Photoelectron spectroscopies revealed that Cl{sub 2} plasma treatment created stable In-Cl bonds and raised the work function of ITO by up to 0.9 eV. These results suggest that the better energy level alignment at the chlorinated ITO/organic interface enhances hole injection, leading to more efficient and more reliable operation of the OLEDs. The developed plasma chlorination process is very effective for surface modification of ITO and compatible with the fabrication of various organic electronics.

Cao, X. A.; Zhang, Y. Q. [Department of Computer Science and Electrical Engineering, West Virginia University, Morgantown, West Virginia 26506 (United States)

2012-04-30T23:59:59.000Z

191

Ag-Pd-Cu alloy inserted transparent indium tin oxide electrodes for organic solar cells  

SciTech Connect (OSTI)

The authors report on the characteristics of Ag-Pd-Cu (APC) alloy-inserted indium tin oxide (ITO) films sputtered on a glass substrate at room temperature for application as transparent anodes in organic solar cells (OSCs). The effect of the APC interlayer thickness on the electrical, optical, structural, and morphological properties of the ITO/APC/ITO multilayer were investigated and compared to those of ITO/Ag/ITO multilayer electrodes. At the optimized APC thickness of 8?nm, the ITO/APC/ITO multilayer exhibited a resistivity of 8.55?×?10{sup ?5} ? cm, an optical transmittance of 82.63%, and a figure-of-merit value of 13.54?×?10{sup ?3} ?{sup ?1}, comparable to those of the ITO/Ag/ITO multilayer. Unlike the ITO/Ag/ITO multilayer, agglomeration of the metal interlayer was effectively relieved with APC interlayer due to existence of Pd and Cu elements in the thin region of the APC interlayer. The OSCs fabricated on the ITO/APC/ITO multilayer showed higher power conversion efficiency than that of OSCs prepared on the ITO/Ag/ITO multilayer below 10?nm due to the flatness of the APC layer. The improved performance of the OSCs with ITO/APC/ITO multilayer electrodes indicates that the APC alloy interlayer prevents the agglomeration of the Ag-based metal interlayer and can decrease the thickness of the metal interlayer in the oxide-metal-oxide multilayer of high-performance OSCs.

Kim, Hyo-Joong; Seo, Ki-Won; Kim, Han-Ki, E-mail: imdlhkkim@khu.ac.kr [Department of Advanced Materials Engineering for Information and Electronics, Kyung-Hee University, 1 Seocheon-dong, Yongin-si, Gyeonggi-do 446-701 (Korea, Republic of); Noh, Yong-Jin; Na, Seok-In [Graduate School of Flexible and Printable Electronics, Chonbuk National University, 664-14, Deokjin-dong, Jeonju-si, Jeollabuk-do 561-756 (Korea, Republic of)

2014-09-01T23:59:59.000Z

192

Photovoltaics: From the laboratory to the marketplace  

SciTech Connect (OSTI)

Photovoltaics (PV), the direct conversion of sunlight to electricity, is experiencing significant improvements in technology performance and lowered costs. Fostering these improvements, the SERI Photovoltaic Advanced Research and Development (PV AR D) Project supports research and provides services to the US PV industry. This paper presents the recent advances and future direction of the PV project. Research areas are Fundamental and Supporting Research, Advanced Thin-Film Materials, High-Efficiency Materials, Module Development, and Systems Development. Materials of interest include amorphous silicon, copper indium diselenide, cadmium telluride, crystalline silicon, gallium arsenide and related alloys, transparent conductors, antireflection coatings, substrates, and encapsulants. The PV project inherently provides technology transfer that helps industry shorten the time to bring R D advances to the marketplace. SERI annually performs over 10,000 measurements for the entire PV community, participates in collaborative research, and welcomes visiting scientists. Two specific areas of recently increased national focus are: (1) manufacturing processes for cost-effective PV modules, and (2) systems development for high-value utility applications. The SERI research approach is based on facilitating direct contact between industry, electric utilities, and others interested in PV technology. This approach heavily relies on SERI/industry partnerships. The arrangements vary to address generic and company-specific problems to improve the US industry's competitive position and accelerate greater electric utility deployment of PV systems. 5 refs., 5 figs., 6 tabs.

Basso, T.S.; Surek, T.; Thornton, J.

1991-03-01T23:59:59.000Z

193

Metastable Electrical Characteristics of Polycrystalline Thin-Film Photovoltaic Modules upon Exposure and Stabilization: Preprint  

SciTech Connect (OSTI)

The significant features of a series of stabilization experiments conducted at the National Renewable Energy Laboratory (NREL) between May 2009 and the present are reported. These experiments evaluated a procedure to stabilize the measured performance of thin-film polycrystalline cadmium telluride (CdTe) and copper indium gallium diselenide (CIGS) thin-film photovoltaic (PV) modules. The current-voltage (I-V) characteristics of CdTe and CIGS thin-film PV devices and modules exhibit transitory changes in electrical performance after thermal exposure in the dark and/or bias and light exposures. We present the results of our case studies of module performance versus exposure: light-soaked at 65 degrees C; exposed in the dark under forward bias at 65 degrees C; and, finally, longer-term outdoor exposure. We find that stabilization can be achieved to varying degrees using either light-soaking or dark bias methods and that the existing IEC 61646 light-soaking interval may be appropriate for CdTe and CIGS modules with one caveat: it is likely that at least three exposure intervals are required for stabilization.

Deline, C. A.; del Cueto, J. A.; Albin, D. S.; Rummel, S. R.

2011-09-01T23:59:59.000Z

194

NREL photovoltaic subcontract reports: Abstracts and document control information, 1 August 1992--31 July 1993  

SciTech Connect (OSTI)

This report contains document control information and abstracts for the National Renewable Energy Laboratory (NREL) subcontracted photovoltaic (PV) program publications. It also lists source information on additional publications that describe US Department of Energy (DOE) PV research activities. It is not totally exhaustive, so it lists NREL contacts for requesting further information on the DOE and NREL PV programs. This report covers the period from August 1, 1992, through July 31, 1993. This report is published periodically, with the previous one covering the period from August 1, 1991, through July 31, 1992. The purpose of continuing this type of publication is to help keep people abreast of specific PV interests, while maintaining a balance on the costs to the PV program. The information in this report is organized under PV technology areas: Amorphous Silicon Research; Polycrystalline Thin Films (including copper indium diselenide, cadmium telluride, and thin-film silicon); Crystalline Materials and Advanced Concepts (including silicon, gallium arsenide, and other group III-V materials); PV Manufacturing Technology Development (which may include manufacturing information for various types of PV materials).

Not Available

1993-09-01T23:59:59.000Z

195

An experiment to test the viability of a gallium-arsenide cathode in a SRF electron gun  

SciTech Connect (OSTI)

Strained gallium arsenide cathodes are used in electron guns for the production of polarized electrons. In order to have a sufficient quantum efficiency lifetime of the cathode the vacuum in the gun must be 10{sup -11} Torr or better, so that the cathode is not destroyed by ion back bombardment or through contamination with residual gases. All successful polarized guns are DC guns, because such vacuum levels can not be obtained in normal conducting RF guns. A superconductive RF gun may provide a sufficient vacuum level due to cryo-pumping of the cavity walls. We report on the progress of our experiment to test such a gun with normal GaAs-Cs crystals.

Kewisch,J.; Ben-Zvi, I.; Rao, T.; Burrill, A.; Pate, D.; Wu, Q.; Todd, R.; Wang, E.; Bluem, H.; Holmes, D.; Schultheiss, T.

2009-05-04T23:59:59.000Z

196

Characteristics of trap-filled gallium arsenide photoconductive switches used in high gain pulsed power applications  

SciTech Connect (OSTI)

The electrical properties of semi-insulating (SI) Gallium Arsenide (GaAs) have been investigated for some time, particularly for its application as a substrate in microelectronics. Of late this material has found a variety of applications other than as an isolation region between devices, or the substrate of an active device. High resistivity SI GaAs is increasingly being used in charged particle detectors and photoconductive semiconductor switches (PCSS). PCSS made from these materials operating in both the linear and non-linear modes have applications such as firing sets, as drivers for lasers, and in high impedance, low current Q-switches or Pockels cells. In the non-linear mode, it has also been used in a system to generate Ultra-Wideband (UWB) High Power Microwaves (HPM). The choice of GaAs over silicon offers the advantage that its material properties allow for fast, repetitive switching action. Furthermore photoconductive switches have advantages over conventional switches such as improved jitter, better impedance matching, compact size, and in some cases, lower laser energy requirement for switching action. The rise time of the PCSS is an important parameter that affects the maximum energy transferred to the load and it depends, in addition to other parameters, on the bias or the average field across the switch. High field operation has been an important goal in PCSS research. Due to surface flashover or premature material breakdown at higher voltages, most PCSS, especially those used in high power operation, need to operate well below the inherent breakdown voltage of the material. The lifetime or the total number of switching operations before breakdown, is another important switch parameter that needs to be considered for operation at high bias conditions. A lifetime of {approximately} 10{sup 4} shots has been reported for PCSS's used in UWB-HPM generation [5], while it has exceeded 10{sup 8} shots for electro-optic drivers. Much effort is currently being channeled in the study related to improvements of these two parameters high bias operation and lifetime improvement for switches used in pulsed power applications. The contact material and profiles are another important area of study. Although these problems are being pursued through the incorporation of different contact materials and introducing doping near contacts, it is important that the switch properties and the conduction mechanism in these switches be well understood such that the basic nature of the problems can be properly addressed. In this paper the authors report on these two basic issues related to the device operation, i.e., mechanisms for increasing the hold-off characteristics through neutron irradiation, and the analysis of transport processes at varying field conditions in trap dominated SI GaAs in order to identify the breakdown mechanism during device operation. It is expected that this study would result in a better understanding of photoconductive switches, specifically those used in high power operation.

ISLAM,N.E.; SCHAMILOGLU,E.; MAR,ALAN; LOUBRIEL,GUILLERMO M.; ZUTAVERN,FRED J.; JOSHI,R.P.

2000-05-30T23:59:59.000Z

197

Distribution of aluminum and indium impurities in crystals of Ge-Si solid solutions grown from the melt  

SciTech Connect (OSTI)

The problem regarding the distribution of aluminum and indium impurities in bulk crystals of solid solutions with a variable composition Ge{sub 1-x}Si{sub x} (0 {<=} x {<=} 0.3) is solved in order to establish regularities of the changes in the segregation coefficients of impurities with variations in the composition of the host lattice in the germanium-silicon system. Aluminum-and indium-doped crystals of Ge{sub 1-x}Si{sub x} (0 {<=} x {<=} 0.3) solid solutions with a silicon content decreasing along the crystallization axis are grown by a modified Bridgman method with the use of a silicon seed. The concentration distribution of impurities over the length of the crystals is determined from Hall measurements. It is demonstrated that the experimental data on the concentration distribution of impurities in the crystals are in good agreement with the results obtained from the theory according to which the equilibrium segregation coefficients of impurities vary linearly with a change in the composition of Ge-Si solid solution crystals.

Kyazimova, V. K. [National Academy of Sciences of Azerbaijan, Institute of Physics (Azerbaijan)], E-mail: zangi@physics.ab.az; Zeynalov, Z. M. [Ganja State University (Azerbaijan); Zakhrabekova, Z. M.; Azhdarov, G. Kh. [National Academy of Sciences of Azerbaijan, Institute of Physics (Azerbaijan)

2006-12-15T23:59:59.000Z

198

Photon self-induced spin-to-orbital conversion in a terbium-gallium-garnet crystal at high laser power  

SciTech Connect (OSTI)

In this paper, we present experimental evidence of a third-order nonlinear optical process, self-induced spin-to-orbital conversion (SISTOC) of the photon angular momentum. This effect is the physical mechanism at the origin of the depolarization of very intense laser beams propagating in isotropic materials. The SISTOC process, like self-focusing, is triggered by laser heating leading to a radial temperature gradient in the medium. In this work we tested the occurrence of SISTOC in a terbium-gallium-garnet rod for an impinging laser power of about 100 W. To study the SISTOC process we used different techniques: polarization analysis, interferometry, and tomography of the photon orbital angular momentum. Our results confirm, in particular, that the apparent depolarization of the beam is due to the occurrence of maximal entanglement between the spin and orbital angular momentum of the photons undergoing the SISTOC process. This explanation of the true nature of the depolarization mechanism could be of some help in finding novel methods to reduce or to compensate for this usually unwanted depolarization effect in all cases where very high laser power and good beam quality are required.

Mosca, S.; De Rosa, R.; Milano, L. [Dipartimento di Scienze Fisiche, Universita di Napoli 'Federico II', Complesso Universitario di Monte S. Angelo, 80126 Napoli (Italy); INFN Sezione di Napoli, Complesso Universitario di Monte S. Angelo, 80126 Napoli (Italy); Canuel, B.; Genin, E. [EGO, European Gravitational Observatory, Via E. Amaldi, 56021 S. Stefano a Macerata, Cascina (Italy); Karimi, E. [Dipartimento di Scienze Fisiche, Universita di Napoli 'Federico II', Complesso Universitario di Monte S. Angelo, 80126 Napoli (Italy); Piccirillo, B.; Santamato, E. [Dipartimento di Scienze Fisiche, Universita di Napoli 'Federico II', Complesso Universitario di Monte S. Angelo, 80126 Napoli (Italy); CNISM-Consorzio Nazionale Interuniversitario per le Scienze Fisiche della Materia, Napoli (Italy); Marrucci, L. [Dipartimento di Scienze Fisiche, Universita di Napoli 'Federico II', Complesso Universitario di Monte S. Angelo, 80126 Napoli (Italy); CNR-INFM Coherentia, Complesso Universitario di Monte S. Angelo, 80126 Napoli (Italy)

2010-10-15T23:59:59.000Z

199

CO{sub 2} laser-based dispersion interferometer utilizing orientation-patterned gallium arsenide for plasma density measurements  

SciTech Connect (OSTI)

A dispersion interferometer based on the second-harmonic generation of a carbon dioxide laser in orientation-patterned gallium arsenide has been developed for measuring electron density in plasmas. The interferometer includes two nonlinear optical crystals placed on opposite sides of the plasma. This instrument has been used to measure electron line densities in a pulsed radio-frequency generated argon plasma. A simple phase-extraction technique based on combining measurements from two successive pulses of the plasma has been used. The noise-equivalent line density was measured to be 1.7 × 10{sup 17} m{sup ?2} in a detection bandwidth of 950 kHz. One of the orientation-patterned crystals produced 13 mW of peak power at the second-harmonic wavelength from a carbon dioxide laser with 13 W of peak power. Two crystals arranged sequentially produced 58 mW of peak power at the second-harmonic wavelength from a carbon dioxide laser with 37 W of peak power.

Bamford, D. J.; Cummings, E. A.; Panasenko, D. [Physical Sciences Inc., 6652 Owens Drive, Pleasanton, California 94588 (United States)] [Physical Sciences Inc., 6652 Owens Drive, Pleasanton, California 94588 (United States); Fenner, D. B.; Hensley, J. M. [Physical Sciences Inc., 20 New England Business Center, Andover, Massachusetts 01810 (United States)] [Physical Sciences Inc., 20 New England Business Center, Andover, Massachusetts 01810 (United States); Boivin, R. L.; Carlstrom, T. N.; Van Zeeland, M. A. [General Atomics, P.O. Box 85608, San Diego, California 92186 (United States)] [General Atomics, P.O. Box 85608, San Diego, California 92186 (United States)

2013-09-15T23:59:59.000Z

200

Low-cost electrochemical treatment of indium tin oxide anodes for high-efficiency organic light-emitting diodes  

SciTech Connect (OSTI)

We demonstrate a simple low-cost approach as an alternative to conventional O{sub 2} plasma treatment to modify the surface of indium tin oxide (ITO) anodes for use in organic light-emitting diodes. ITO is functionalized with F{sup ?} ions by electrochemical treatment in dilute hydrofluoric acid. An electrode with a work function of 5.2?eV is achieved following fluorination. Using this electrode, a maximum external quantum efficiency of 26.0% (91?cd/A, 102?lm/W) is obtained, which is 12% higher than that of a device using the O{sub 2} plasma-treated ITO. Fluorination also increases the transparency in the near-infrared region.

Hui Cheng, Chuan, E-mail: chengchuanhui@dlut.edu.cn; Shan Liang, Ze; Gang Wang, Li; Dong Gao, Guo; Zhou, Ting; Ming Bian, Ji; Min Luo, Ying [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China); Tong Du, Guo, E-mail: dugt@dlut.edu.cn [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China); State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012 (China)

2014-01-27T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Brazing open cell reticulated copper foam to stainless steel tubing with vacuum furnace brazed gold/indium alloy plating  

DOE Patents [OSTI]

A method of fabricating a heat exchanger includes brush electroplating plated layers for a brazing alloy onto a stainless steel tube in thin layers, over a nickel strike having a 1.3 .mu.m thickness. The resultant Au-18 In composition may be applied as a first layer of indium, 1.47 .mu.m thick, and a second layer of gold, 2.54 .mu.m thick. The order of plating helps control brazing erosion. Excessive amounts of brazing material are avoided by controlling the electroplating process. The reticulated copper foam rings are interference fit to the stainless steel tube, and in contact with the plated layers. The copper foam rings, the plated layers for brazing alloy, and the stainless steel tube are heated and cooled in a vacuum furnace at controlled rates, forming a bond of the copper foam rings to the stainless steel tube that improves heat transfer between the tube and the copper foam.

Howard, Stanley R. (Windsor, SC); Korinko, Paul S. (Aiken, SC)

2008-05-27T23:59:59.000Z

202

Efficient Polymer Solar Cells Fabricated on Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate)-Etched Old Indium Tin Oxide Substrates  

SciTech Connect (OSTI)

In organic electronic devices, indium tin oxide (ITO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are the most common transparent electrode and anodic buffer layer materials, respectively. A widespread concern is that PEDOT:PSS is acidic and etches ITO. We show that this issue is not serious: only a few nanometers of ITO are etched in typical device processing conditions and storage thereafter; conductivity losses are affordable; and optical transmission gains further offset these losses. Organic photovoltaic (OPV) devices fabricated on old ITO (with PEDOT:PSS history) were similar or higher in efficiency than devices on fresh ITO. Poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b?]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl

Elshobaki, Moneim [Mansoura University; Anderegg, James [Ames Laboratory; Chaudhary, Sumit [Ames Laboratory

2014-08-13T23:59:59.000Z

203

Investigation of charge compensation in indium-doped tin dioxide by hydrogen insertion via annealing under humid conditions  

SciTech Connect (OSTI)

The behavior of hydrogen (H) as an impurity in indium (In)-doped tin dioxide (SnO{sub 2}) was investigated by mass spectrometry analyses, with the aim of understanding the charge compensation mechanism in SnO{sub 2}. The H-concentration of the In-doped SnO{sub 2} films increased to (1–2)?×?10{sup 19}?cm{sup ?3} by annealing in a humid atmosphere (WET annealing). The electron concentration in the films also increased after WET annealing but was two orders of magnitude less than their H-concentrations. A self-compensation mechanism, based on the assumption that H sits at substitutional sites, is proposed to explain the mismatch between the electron- and H-concentrations.

Watanabe, Ken, E-mail: Watanabe.Ken@nims.go.jp [National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); International Center for Young Scientists (ICYS-MANA), NIMS, 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Ohsawa, Takeo; Ross, Emily M., E-mail: emross@hmc.edu; Adachi, Yutaka; Haneda, Hajime [National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Sakaguchi, Isao; Takahashi, Ryosuke [National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Department of Applied Science for Electronics and Materials, Kyushu University, 6-1 Kasuga-kouen Kasuga, Fukuoka 816-8580 (Japan); Bierwagen, Oliver, E-mail: bierwagen@pdi-berlin.de [Paul-Drude-Institute, Hausvogteiplatz 5-7, 10117 Berlin (Germany); Materials Department, University of California, Santa Barbara, California 93106 (United States); White, Mark E.; Tsai, Min-Ying; Speck, James S., E-mail: speck@ucsb.edu [Materials Department, University of California, Santa Barbara, California 93106 (United States); Ohashi, Naoki, E-mail: Ohashi.Naoki@nims.go.jp [National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Department of Applied Science for Electronics and Materials, Kyushu University, 6-1 Kasuga-kouen Kasuga, Fukuoka 816-8580 (Japan); Materials Research Center for Element Strategy (MCES), Mailbox S2-13, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-0026 (Japan)

2014-03-31T23:59:59.000Z

204

Enhancement in light emission and electrical efficiencies of a silicon nanocrystal light-emitting diode by indium tin oxide nanowires  

SciTech Connect (OSTI)

We report an enhancement in light emission and electrical efficiencies of a Si nanocrystal (NC) light-emitting diode (LED) by employing indium tin oxide (ITO) nanowires (NWs). The formed ITO NWs (diameter?

Huh, Chul, E-mail: chuh@etri.re.kr; Kim, Bong Kyu; Ahn, Chang-Geun; Kim, Sang-Hyeob [IT Convergence Technology Research Laboratory, Electronics and Telecommunications Research Institute, Daejeon 305-350 (Korea, Republic of); Choi, Chel-Jong [Department of BIN Fusion Technology, Chonbuk National University, Jeonju 561-756 (Korea, Republic of)

2014-07-21T23:59:59.000Z

205

Hort-Range Wetting at Liquid Gallium-Bismuth Alloy Surfaces: X-ray Measurements and Square-Gradient Theory  

SciTech Connect (OSTI)

We present an x-ray reflectivity study of wetting at the free surface of the binary liquid metal alloy gallium-bismuth (Ga-Bi) in the region where the bulk phase separates into Bi-rich and Ga-rich liquid phases. The measurements reveal the evolution of the microscopic structure of the wetting films of the Bi-rich, low-surface-tension phase along several paths in the bulk phase diagram. The wetting of the Ga-rich bulk's surface by a Bi-rich wetting film, the thickness of which is limited by gravity to only 50 Angstroms, creates a Ga-rich/Bi-rich liquid/liquid interface close enough to the free surface to allow its detailed study by x rays. The structure of the interface is determined with Angstromsngstrem resolution, which allows the application of a mean-field square gradient model extended by the inclusion of capillary waves as the dominant thermal fluctuations. The sole free parameter of the gradient model, the influence parameter K, that characterizes the influence of concentration gradients on the interfacial excess energy, is determined from our measurements. This, in turn, allows a calculation of the liquid/liquid interfacial tension, and a separation of the intrinsic and capillary wave contributions to the interfacial structure. In spite of expected deviations from MF behavior, based on the upper critical dimensionality (Du = 3 ) of the bulk, we find that the capillary wave excitations only marginally affect the short-range complete wetting behavior. A critical wetting transition that is sensitive to thermal fluctuations appears to be absent in this binary liquid-metal alloy.

Huber, P.; Shpyrko, O; Pershan, P; Ocko, B; DiMasi, E; Deutsch, M

2009-01-01T23:59:59.000Z

206

Indium-tin-oxide-free tris(8-hydroxyquinoline) Al organic light-emitting diodes with 80% enhanced power efficiency  

SciTech Connect (OSTI)

Efficient indium tin oxide (ITO)-free small molecule organic light-emitting diodes (SMOLEDs) with multilayered highly conductive poly(3,4-ethylenedioxy thiophene):poly(styrenesulfonate) (PEDOT:PSS) as the anode are demonstrated. PEDOT:PSS/MoO{sub 3}/N,N'-diphenyl- N,N'-bis(1-naphthylphenyl)-1,1'-biphenyl-4,4'-diamine (NPD)/tris(8-hydroxyquinoline) Al (Alq{sub 3})/4,7-diphenyl-1,10-phenanthroline (BPhen)/LiF/Al SMOLEDs exhibited a peak power efficiency of 3.82 lm/W, 81% higher than that of similar ITO-based SMOLEDs (2.11 lm/W). The improved performance is believed to be due to the higher work function, lower refractive index, and decreased surface roughness of PEDOT:PSS vs ITO, and to Ohmic hole injection from PEDOT:PSS to the NPD layer via the MoO{sub 3} interlayer. The results demonstrate that PEDOT:PSS can substitute ITO in SMOLEDs with strongly improved device performance.

Cai, Min; Xiao, Teng; Liu, Rui; Chen, Ying; Shinar, Ruth; Shinar, Joseph

2011-10-11T23:59:59.000Z

207

Flexible Ultra Moisture Barrier Film for Thin-Film Photovoltaic Applications  

SciTech Connect (OSTI)

Flexible Thin-film photovoltaic (TFPV) is a low cost alternative to incumbent c-Si PV products as it requires less volume of costly semiconductor materials and it can potentially reduce installation cost. Among the TFPV options, copper indium gallium diselenide (CIGS) has the highest efficiency and is believed to be one of the most attractive candidates to achieve PV cost reduction. However, CIGS cells are very moisture sensitive and require module water vapor transmission rate (WVTR) of less than 1x10-4 gram of water per square meter per day (g-H2O/m2/day). Successful development and commercialization of flexible transparent ultra moisture barrier film is the key to enable flexible CIGS TFPV products, and thus enable ultimate PV cost reduction. At DuPont, we have demonstrated at lab scale that we can successfully make polymer-based flexible transparent ultra moisture barrier film by depositing alumina on polymer films using atomic layer deposition (ALD) technology. The layer by layer ALD approach results in uniform and amorphous structure which effectively reduces pinhole density of the inorganic coating on the polymer, and thus allow the fabrication of flexible barrier film with WVTR of 10-5 g-H2O/m2/day. Currently ALD is a time-consuming process suitable only for high-value, relatively small substrates. To successfully commercialize the ALD-on-plastic technology for the PV industry, there is the need to scale up this technology and improve throughput. The goal of this contract work was to build a prototype demonstrating that the ALD technology could be scaled-up for commercial use. Unfortunately, the prototype failed to produce an ultra-barrier film by the close of the project.

David M. Dean

2012-10-30T23:59:59.000Z

208

E-Print Network 3.0 - all-solid-state dye-sensitized solar Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

spectrum Poly-Si CdTe CIGS (Copper-Indium-Gallium-Selenide) Organic and Dye-Sensitized Solar Cells 12;Cd... ;Light Concentration using Nanoparticle Plasmon Resonances 12;Dye...

209

Association between oxygen vacancies and trivalent dopants in crystalline and amorphous ZnO  

E-Print Network [OSTI]

Density functional theory calculations are used to investigate the structure and binding energies of clusters formed between oxygen vacancies and trivalent dopant atoms (indium, gallium and aluminium) substituted into zinc oxide. Our results show...

Muñoz Ramo, D.; Chroneos, A.; Rushton, M. J. D.; Bristowe, P .D.

2014-03-31T23:59:59.000Z

210

MOCVD growth of In GaP-based heterostructures for light emitting devices  

E-Print Network [OSTI]

In this work, we examine fundamental materials processes in the growth of indium gallium phosphide (InGaP) via metalorganic chemical vapor deposition (MOCVD). In particular, we realize improvements in the epitaxial integration ...

McGill, Lisa Megan, 1975-

2004-01-01T23:59:59.000Z

211

Recent technological advances in thin film solar cells  

SciTech Connect (OSTI)

High-efficiency, low-cost thin film solar cells are an exciting photovoltaic technology option for generating cost-effective electricity in 1995 and beyond. This paper reviews the substantial advances made by several thin film solar cell technologies, namely, amorphous silicon, copper indium diselenide, cadmium telluride, and polycrystalline silicon. Recent examples of utility demonstration projects of these emerging materials are also discussed. 8 refs., 4 figs.

Ullal, H.S.; Zwelbel, K.; Surek, T.

1990-03-01T23:59:59.000Z

212

CX-010895: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Development and Industrialization of Indium Gallium Nitride/Gallium Nitride (InGaN/GaN) Light Emitting Diodes LEDs on Patterned Sapphire Substrate (PSS) for Low Cost Emitter Architecture CX(s) Applied: B3.6 Date: 06/27/2013 Location(s): California Offices(s): National Energy Technology Laboratory

213

innovati nNREL Scientists Spurred the Success of Multijunction Solar Cells  

E-Print Network [OSTI]

innovati nNREL Scientists Spurred the Success of Multijunction Solar Cells Before 1984, many a solar cell can convert into electricity. Olson thought the focus should change to finding materials-winning gallium indium phosphide/gallium arsenide tandem solar cell, which had achieved record efficiencies, con

214

Enhancement of hole injection and electroluminescence by ordered Ag nanodot array on indium tin oxide anode in organic light emitting diode  

SciTech Connect (OSTI)

We report the enhancement of hole injection and electroluminescence (EL) in an organic light emitting diode (OLED) with an ordered Ag nanodot array on indium-tin-oxide (ITO) anode. Until now, most researches have focused on the improved performance of OLEDs by plasmonic effects of metal nanoparticles due to the difficulty in fabricating metal nanodot arrays. A well-ordered Ag nanodot array is fabricated on the ITO anode of OLED using the nanoporous alumina as an evaporation mask. The OLED device with Ag nanodot arrays on the ITO anode shows higher current density and EL enhancement than the one without any nano-structure. These results suggest that the Ag nanodot array with the plasmonic effect has potential as one of attractive approaches to enhance the hole injection and EL in the application of the OLEDs.

Jung, Mi, E-mail: jmnano00@gmail.com, E-mail: Dockha@kist.re.kr [Sensor System Research Center, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); School of Mechanical Systems Engineering, Kookmin University, Seoul 136-702 (Korea, Republic of); Mo Yoon, Dang; Kim, Miyoung [Korea Printed Electronics Center, Korea Electronics Technology Institute, Jeollabuk-do, 561-844 (Korea, Republic of); Kim, Chulki; Lee, Taikjin; Hun Kim, Jae; Lee, Seok; Woo, Deokha, E-mail: jmnano00@gmail.com, E-mail: Dockha@kist.re.kr [Sensor System Research Center, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Lim, Si-Hyung [School of Mechanical Systems Engineering, Kookmin University, Seoul 136-702 (Korea, Republic of)

2014-07-07T23:59:59.000Z

215

Investigations of CuInSe sub 2 thin films and contacts  

SciTech Connect (OSTI)

This report describes research into electrical contacts for copper indium diselenide (CuInSe{sub 2}) polycrystalline thin films used for solar cell applications. Molybdenum contacts have historically been the most promising for heterojunction solar cells. This program studied contact stability by investigating thermally induced bilayer reactions between molybdenum and copper, indium, and selenium. Because selenization is widely used to fabricate CuInSe{sub 2} thin films for photovoltaic cells, a second part of the program investigated how the morphologies, phases, and reactions of pre-selenization Cu-In structures are affected by the deposition process and heat treatments. 7 refs., 6 figs.

Nicolet, M.A. (California Inst. of Tech., Pasadena, CA (United States))

1991-10-01T23:59:59.000Z

216

InAs quantum wire induced composition modulation in an In{sub 0.53}Ga{sub 0.37}Al{sub 0.10}As barrier layer grown on an InP substrate  

SciTech Connect (OSTI)

Composition modulations are observed by transmission electron microscopy in In{sub 0.53}Ga{sub 0.37}Al{sub 0.10}As barrier layers that overgrow both single- and multilayer InAs quantum wire structures grown on an InP substrate. Indium-rich (gallium-deficient) regions were observed in the region of the barrier layer lying directly above individual quantum wires, while indium-deficient (gallium-rich) regions were detected in the barrier above the gaps between adjacent underlying quantum wires. The magnitude of such modulation was typically 7% (atomic percent) for both indium and gallium as estimated from the energy dispersive x-ray analysis. The origin of such composition modulations was determined by modeling the chemical potential distribution for indium and gallium on the growth front of the barrier layer at the initial capping stage of the quantum wires with finite element simulations. It is found that the number and positions of the indium-rich regions are determined by the combined effects of strain and surface energy distributions on the barrier material capping the quantum wires. Moreover the estimated magnitudes of the composition modulation for both indium and gallium from the finite element models are in good agreement with the experimental observations. This method provides a simple way to understand the origin of, and to estimate the magnitude of the quantum wire-induced composition modulation in the barrier layer.

Cui, K. [Department of Materials Science and Engineering, McMaster University, Hamilton, Ontario L8S 4L7 (Canada); Robinson, B. J. [Center for Emerging Device Technologies, McMaster University, Hamilton, Ontario L8S 4L7 (Canada); Thompson, D. A. [Center for Emerging Device Technologies, McMaster University, Hamilton, Ontario L8S 4L7 (Canada); Department of Engineering Physics, McMaster University, Hamilton, Ontario L8S 4L7 (Canada); Botton, G. A. [Department of Materials Science and Engineering, McMaster University, Hamilton, Ontario L8S 4L7 (Canada); Center for Emerging Device Technologies, McMaster University, Hamilton, Ontario L8S 4L7 (Canada)

2010-08-15T23:59:59.000Z

217

GaN-based light-emitting diode with textured indium tin oxide transparent layer coated with Al{sub 2}O{sub 3} powder  

SciTech Connect (OSTI)

Surface-textured InGaN/GaN light-emitting diodes (LEDs) coated with transparent Al{sub 2}O{sub 3} powder were fabricated by natural lithography combined with inductively coupled plasma etching. For surface texturing, 300 nm size Al{sub 2}O{sub 3} powder is used as an etching mask by simply coating the surface using a spin-coating process. Also, the powders are left on the surface after surface texturing to further increase extraction efficiency. At 20 mA, the light output power of the textured indium tin oxide (ITO) InGaN/GaN LEDs coated with the Al{sub 2}O{sub 3} powder is enhanced by {approx}112% compared with the conventional nontextured ITO LED. The enhanced light output power is attributed to the improved extraction efficiency resulting from an overall decrease in the total internal reflection due to the textured surface and the Al{sub 2}O{sub 3} powder coating.

Kim, T. K.; Kim, S. H.; Yang, S. S.; Son, J. K.; Lee, K. H.; Hong, Y. G.; Shim, K. H.; Yang, J. W.; Lim, K. Y.; Yang, G. M. [Department of Semiconductor and Chemical Engineering and Semiconductor Physics Research Center, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Bae, S. J. [Optowell Co., Ltd., 308, Semiconductor Physics Research Center, 664-14, Dukjin-Dong, Dukjin-Gu, Jeonju 561-756 (Korea, Republic of)

2009-04-20T23:59:59.000Z

218

Morphology and structure evolution of tin-doped indium oxide thin films deposited by radio-frequency magnetron sputtering: The role of the sputtering atmosphere  

SciTech Connect (OSTI)

The microstructure and morphology evolution of tin-doped indium oxide (ITO) thin films deposited by radio-frequency magnetron sputtering in different sputtering atmospheres were investigated by X-ray diffraction, X-ray reflectivity, and atomic force microscopy. The surface roughness w increases with increasing film thickness d{sub f}, and exhibits a power law behavior w???d{sub f}{sup ?}. The roughness decreases with increasing O{sub 2} flow, while it increases with increasing H{sub 2} flow. The growth exponent ? is found to be 0.35, 0.75, and 0.98 for depositions in Ar/10%O{sub 2}, pure Ar, and Ar/10%H{sub 2} atmospheres, respectively. The correlation length ? increases with film thickness also with a power law according to ????d{sub f}{sup z} with exponents z?=?0.36, 0.44, and 0.57 for these three different gas atmospheres, respectively. A combination of local and non-local growth modes in 2?+?1 dimensions is discussed for the ITO growth in this work.

Nie, Man, E-mail: man.nie@helmholtz-berlin.de; Mete, Tayfun; Ellmer, Klaus [Department of Solar Fuels and Energy Storage Materials, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, D14109 Berlin (Germany)

2014-04-21T23:59:59.000Z

219

Enhancement of conduction noise absorption by hybrid absorbers composed of indium-tin-oxide thin film and magnetic composite sheet on a microstrip line  

SciTech Connect (OSTI)

In order to develop wide-band noise absorbers with a focused design for low frequency performance, this study investigates hybrid absorbers that are composed of conductive indium-tin-oxide (ITO) thin film and magnetic composite sheets. The ITO films prepared via reactive sputtering exhibit a typical value of electrical resistivity of ?10{sup ?4} ? m. Rubber composites with flaky Fe-Si-Al particles are used as the magnetic sheet with a high permeability and high permittivity. For the ITO film with a low surface resistance and covered by the magnetic sheet, approximately 90% power absorption can be obtained at 1?GHz, which is significantly higher than that of the original magnetic sheet or ITO film. The high power absorption of the hybrid absorber is attributed to the enhanced ohmic loss of the ITO film through increased electric field strength bounded by the upper magnetic composite sheet. However, for the reverse layering sequence of the ITO film, the electric field experienced by ITO film is very weak due to the electromagnetic shielding by the under layer of magnetic sheet, which does not result in enhanced power absorption.

Kim, Sun-Hong; Kim, Sung-Soo, E-mail: sskim@chungbuk.ac.kr [Department of Advanced Materials Engineering, Chungbuk National University, Cheongju 361-763 (Korea, Republic of)

2014-05-05T23:59:59.000Z

220

Sandia National Laboratories: gallium nitride  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia,evaluatingfull module characterization HelioVoltphysicsgallium

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Crystal structure and chemistry of a complex indium phosphate framework material, (ethylenediammonium)In{sub 3}P{sub 3}O{sub 12}(OH){sub 2}  

SciTech Connect (OSTI)

The chemistry and structure of a novel indium phosphate material (RIPS-4), (H{sub 3}NCH{sub 2}CH{sub 2}NH{sub 3})In{sub 3}-P{sub 3}O{sub 12}(OH){sub 2}, are described. RIPS-4 was synthesized using ethylene diamine as a structure-directing organic agent. The X-ray crystal structure was determined from a 12 Multiplication-Sign 12 Multiplication-Sign 42 {mu}m{sup 3} crystal in space group C2/m with a=18.662(4) A, b=6.600(2) A, c=12.573(3) A and {beta}=120.92(1) Degree-Sign . The structure consists of a complex edge- and vertex-shared open framework of InO{sub 6} octahedra and PO{sub 4} tetrahedra enclosing cavities occupied by ethylenediamonium ions. One set of octahedra share opposing edges to form chains along the b-axis matching the structural unit in rutile (TiO{sub 2}). This rutile edge-shared chain has its projecting oxygen atoms shared with the vertexes of either a PO{sub 4} tetrahedron or a second type of InO{sub 6} octahedron. The O atoms are 2-connected, each to one In and one P, except for two protonated O atoms (hydroxyl groups) that connect to two and three In atoms, giving three- and four-coordinate O atoms, respectively. - Graphical abstract: The unique topology contains an unusual 4-connected oxygen atom (O{sub 1}) in a complex edge- and vertex-shared open framework of InO{sub 6} octahedra (blue) and PO{sub 4} tetrahedra (yellow) that encloses cavities occupied by ethylenediammonium ions. Highlights: Black-Right-Pointing-Pointer The structure has a unique open-framework topology. Black-Right-Pointing-Pointer The framework contains an unusual 4-connected oxygen atom. Black-Right-Pointing-Pointer Hydrogen bonds hold the ethylenediammonium ions in the cavities.

Broach, Robert W., E-mail: robert.broach@uop.com [UOP, a Honeywell Co., 50 E. Algonquin Rd., Des Plaines, IL 60017 (United States); Bedard, Robert L. [UOP, a Honeywell Co., 50 E. Algonquin Rd., Des Plaines, IL 60017 (United States)] [UOP, a Honeywell Co., 50 E. Algonquin Rd., Des Plaines, IL 60017 (United States); King, Lisa M., E-mail: lisa.king@uop.com [UOP, a Honeywell Co., 50 E. Algonquin Rd., Des Plaines, IL 60017 (United States); Pluth, Joseph J., E-mail: pluth@cars.uchicago.edu [The University of Chicago, Department of the Geophysical Sciences, Consortium for Advanced Radiation Sources, Chicago, IL 60637 (United States); The University of Chicago, The Materials Research Science and Engineering Center, Chicago, IL 60637 (United States); Smith, Joseph V. [The University of Chicago, Department of the Geophysical Sciences, Consortium for Advanced Radiation Sources, Chicago, IL 60637 (United States)] [The University of Chicago, Department of the Geophysical Sciences, Consortium for Advanced Radiation Sources, Chicago, IL 60637 (United States); Kirchner, Richard M., E-mail: richard.kirchner@manhattan.edu [Manhattan College, Chemistry Department, Bronx, NY 10471 (United States)

2012-12-15T23:59:59.000Z

222

Realization of indium liquidus point  

E-Print Network [OSTI]

and Glass Rod, and Thermi. stor Reading vs Time (yZ) 43 ThRLN 2 PRT OUTPUT VS. HEhTlNG VOLThGR Voltage on hluainua PRT Output (aV) 22 g 28 g 28 N 29 N 32 M 34 N 13. 600 14. 391 14 ~ 395 14. 393 14. 414 3. Final Results The cell... FOR CONSTANT CURRENT SUPPLT TABLE B-I DATA fOR CONSTANT CURRENT WITHIN HOURS (4/28/83) Tias (hr ~ ( aiu ) Output Voltsgs (aV) 35. 02507 35. 02505 35. 02496 35. 02498 TABLE B-II DATA FOR CONSTANT CURRENT WITHIN HOURS (6/22/83) Tias (hr. : ain. ) Output...

Feng, En-Ling

1984-01-01T23:59:59.000Z

223

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fund LasDubey MathematicaMeasuring and Understanding

224

Mechanical Behavior of Indium Nanostructures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fund LasDubey MathematicaMeasuring and UnderstandingMechanical

225

High-efficiency solar cells fabricated from direct-current magnetron sputtered n-indium tin oxide onto p-InP grown by atmospheric pressure metalorganic vapor phase epitaxy  

SciTech Connect (OSTI)

Solar cells based on dc magnetron sputtered indium tin oxide onto epitaxially grown films of p-InP have been fabricated and analyzed. The best cells had a global efficiency of 18.4% and an air mass zero (AMO) efficiency of 16.0%. The principal fabrication variable considered was the constituency of the sputtering gas and both argon/hydrogen and argon/oxygen mixtures have been used. The former cells have the higher efficiencies, are apparently stable, and exhibit almost ideal junction characteristics. The latter cells are relatively unstable and exhibit much higher ideality factors and reverse saturation current densities. The temperature dependence of the reverse saturation current indicates totally different charge transfer mechanisms in the two cases.

Li, X.; Wanlass, M.W.; Gessert, T.A.; Emery, K.A.; Coutts, T.J.

1989-05-01T23:59:59.000Z

226

Synthesis and use of (perfluoroaryl) fluoro-aluminate anion  

DOE Patents [OSTI]

A trityl perfluorophenyl alumninate such as tris(2,2',2"-nonafluorobiphenyl)-fluoroaluminate (PBA.sup..crclbar.) and its role as a cocatalyst in metallocene-mediated olefin polymerization is disclosed. Gallium and indium analogs are also disclosed, as are analogs with different anyl groups or different numbers of flourine atoms thereon.

Marks, Tobin J. (Evanston, IL); Chen, You-Xian (Midland, MI)

2001-01-01T23:59:59.000Z

227

Fluidic patch antenna based on liquid metal alloy/single-wall carbon-nanotubes operating at the S-band frequency  

E-Print Network [OSTI]

Fluidic patch antenna based on liquid metal alloy/single-wall carbon-nanotubes operating at the S (eutectic gallium indium) blended with single-wall carbon-nanotube (SWNTs). The nanocomposite­24 For instance, Cheng et al.15 and So and coworkers14 reported an unbalanced loop antenna and a half- wave dipole

228

Method of forming particulate materials for thin-film solar cells  

DOE Patents [OSTI]

A method for preparing particulate materials useful in fabricating thin-film solar cells is disclosed. Particulate materials is prepared by the method include for example materials comprising copper and indium and/or gallium in the form of single-phase, mixed-metal oxide particulates; multi-phase, mixed-metal particulates comprising a metal oxide; and multinary metal particulates.

Eberspacher, Chris; Pauls, Karen Lea

2004-11-23T23:59:59.000Z

229

Layer-By-Layer Self-Assembly of CIGS Nanoparticles and Polymers for All-Solution Processable Low-Cost, High-Efficiency Solar Cells  

E-Print Network [OSTI]

-Cost, High-Efficiency Solar Cells Tung Ho1 , Robert Vittoe3 , Namratha Kakumanu2 , Sudhir Shrestha2-Purdue University Indianapolis (IUPUI), Indianapolis, IN 46202 Thin film solar cells made from copper indium gallium thereby affecting solar cell efficiency. This research aims to study various polymer materials to replace

Zhou, Yaoqi

230

PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS Prog. Photovolt: Res. Appl. 2006; 14:2543  

E-Print Network [OSTI]

PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS Prog. Photovolt: Res. Appl. 2006; 14 Solar Energy, Inc., 5575 S. Houghton Rd, Tucson, AZ 85747, USA 7 Energy Photovoltaics, Inc., 276 Bakers transport within copper indium gallium sulfoselenide (CIGSS) photovoltaic devices, whose absorber layers

Anderson, Timothy J.

231

CX-002541: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Emerging Renewables Industries: Copper, Indium, Gallium, Selenium (CIGS) Linear Source Thermal DepositionCX(s) Applied: B2.2, B5.1Date: 05/19/2010Location(s): St. Paul, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

232

Metal articles having ultrafine particles dispersed therein  

SciTech Connect (OSTI)

This patent describes a metal article of manufacture. It comprises: a metal selected from the group consisting of copper, silver, gold, lead, tin, nickel, zinc, cobalt, antimony, bismuth, iron, cadmium, chromium, germanium, gallium, selenium, tellurium, mercury, tungsten arsenic, manganese, iridium, indium, ruthenium, rhenium, rhodium, molybdenum, palladium, osmium and platinum; and a plurality of ultrafine particles.

Alexander, G.B.; Nadkarni, R.A.

1992-07-28T23:59:59.000Z

233

National Renewable Energy Laboratory  

E-Print Network [OSTI]

Hydrogen-Production Technology Hydrogen offers great promise as a clean fuel in our nation's energy research and collaboration to improve the durability of photovoltaic cells for PEC hydrogen production-indium-phosphide/ gallium-arsenide) with an impressive 12.4% solar-to-hydrogen efficiency. Unfortunately, the tandem cell

234

Efficient indium-tin-oxide free inverted organic solar cells based on aluminum-doped zinc oxide cathode and low-temperature aqueous solution processed zinc oxide electron extraction layer  

SciTech Connect (OSTI)

Indium-tin-oxide (ITO) free inverted organic solar cells (IOSCs) based on aluminum-doped zinc oxide (AZO) cathode, low-temperature aqueous solution processed zinc oxide (ZnO) electron extraction layer, and poly(3-hexylthiophene-2, 5-diyl):[6, 6]-phenyl C{sub 61} butyric acid methyl ester blend were realized in this work. The resulted IOSC with ZnO annealed at 150?°C shows the superior power conversion efficiency (PCE) of 3.01%, if decreasing the ZnO annealing temperature to 100?°C, the obtained IOSC also shows a PCE of 2.76%, and no light soaking issue is observed. It is found that this ZnO film not only acts as an effective buffer layer but also slightly improves the optical transmittance of AZO substrates. Further, despite the relatively inferior air-stability, these un-encapsulated AZO/ZnO IOSCs show comparable PCEs to the referenced ITO/ZnO IOSCs, which demonstrates that the AZO cathode is a potential alternative to ITO in IOSCs. Meanwhile, this simple ZnO process is compatible with large area deposition and plastic substrates, and is promising to be widely used in IOSCs and other relative fields.

Chen, Dazheng; Zhang, Chunfu, E-mail: cfzhang@xidian.edu.cn; Wang, Zhizhe; Zhang, Jincheng; Tang, Shi; Wei, Wei; Sun, Li; Hao, Yue, E-mail: yhao@xidian.edu.cn [State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, No. 2 South Taibai Road, Xi'an 710071 (China)

2014-06-16T23:59:59.000Z

235

D e f e c t a c t i v a t e d i n f r a r e d m u lt i p h n o n e x c i t a t i o n i n i r n -d o p e d s e m i-insulating indium phosphide  

E-Print Network [OSTI]

D e f e c t a c t i v a t e d i n f r a r e d m u lt i p h £ n o n e x c i t a t i o n i n i r £ n - d o p e d s e m i- insulating indium phosphide Lung-Han Peng,a) Tom Broekaert, Woo Young Chd od eu m - Teller distortion eHems is observed in Fe-doped settHung nam - I nP in the spectral range

Choi, Woo-Young

236

Electronic properties of gallium nitride nanowires  

E-Print Network [OSTI]

This thesis presents a systematic study of the electrical transport in GaN nanowires. Particularly, the effect of the surrounding dielectric on the conductivity of GaN nanowires is experimentally shown for the first time. ...

Yoon, Joonah

2008-01-01T23:59:59.000Z

237

Interactions of gallium with zircaloy cladding  

E-Print Network [OSTI]

CHAPTER I INTRODUCTION The accepted options for the disposition of weapons-grade plutonium (WGPu) are immobilization or conversion to a mixed-oxide (MOX) reactor fuel. There are two benefits of conversion, one, the plutonium can't be converted back... into a viable weapon and two, the material could be used as an energy producing natural resource. Typical reactors use uranium dioxide enriched with about 3'le U-235. The proposed MOX fuel would consist of depleted uranium with WGPu. In order...

Mitchell, Lee Josey

2012-06-07T23:59:59.000Z

238

Superconductive silicon nanowires using gallium beam lithography.  

SciTech Connect (OSTI)

This work was an early career LDRD investigating the idea of using a focused ion beam (FIB) to implant Ga into silicon to create embedded nanowires and/or fully suspended nanowires. The embedded Ga nanowires demonstrated electrical resistivity of 5 m-cm, conductivity down to 4 K, and acts as an Ohmic silicon contact. The suspended nanowires achieved dimensions down to 20 nm x 30 nm x 10 m with large sensitivity to pressure. These structures then performed well as Pirani gauges. Sputtered niobium was also developed in this research for use as a superconductive coating on the nanowire. Oxidation characteristics of Nb were detailed and a technique to place the Nb under tensile stress resulted in the Nb resisting bulk atmospheric oxidation for up to years.

Henry, Michael David; Jarecki, Robert Leo,

2014-01-01T23:59:59.000Z

239

Self- and zinc diffusion in gallium antimonide  

E-Print Network [OSTI]

5, 265 (1957). S. Glasstone, K . Laidler, H . Eyring, Thequantity D . Henry Eyring [Glasstone, Eyring (1941)] was the

Nicols, Samuel Piers

2002-01-01T23:59:59.000Z

240

Designing Asynchronous Circuits in Gallium Arsenide  

E-Print Network [OSTI]

3.2.2 Super Buffered Fet Logic : : : : : : : : : : : : : : : : : 18 4 A New Logic Family 21 4.1 Input Stage : : : : : : : : : : : : : : : : : : : : : : : : : : : : 21 4.1.1 Inverter : : : : : : : : : : : : : : : : : : : : : : : : 34 5.2.2 Output stage : : : : : : : : : : : : : : : : : : : : : : : 36 5.2.3 Delay model and power

Martin, Alain

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Low dimensional GaAs/air vertical microcavity lasers  

SciTech Connect (OSTI)

We report on the fabrication of gallium arsenide (GaAs)/air distributed Bragg reflector microresonators with indium gallium arsenide quantum wells. The structures are studied via momentum resolved photoluminescence spectroscopy which allows us to investigate a pronounced optical mode quantization of the photonic dispersion. We can extract a length parameter from these quantized states whose upper limit can be connected to the lateral physical extension of the microcavity via analytical calculations. Laser emission from our microcavity under optical pumping is observed in power dependent investigations.

Gessler, J.; Steinl, T.; Fischer, J.; Höfling, S.; Schneider, C.; Kamp, M. [Technische Physik, Physikalisches Institut and Wilhelm Conrad Röntgen-Research Center for Complex Material Systems, Universität Würzburg, Am Hubland, D-97074 Würzburg (Germany); Mika, A.; S?k, G.; Misiewicz, J. [Institute of Physics, Wroclaw University of Technology, Wybrze?e Wyspia?skiego 27, 50-370 Wroc?aw (Poland)

2014-02-24T23:59:59.000Z

242

Indium Antimonide Nanowires: Synthesis, Characterization, and Applications  

E-Print Network [OSTI]

M. Ozkan, Journal of Nanoscience and Nanotechnology 11 (M. Ozkan, Journal of Nanoscience and Nanotechnology 10 (C. S. Ozkan, Journal of Nanoscience and Nanotechnology 9 (

Penchev, Miroslav Valentinov

2012-01-01T23:59:59.000Z

243

Indium Antimonide Nanowires: Synthesis, Characterization, and Applications  

E-Print Network [OSTI]

response upon exposure to IPA vapor, followed by Ar gas. b)gas. c) Current response to IPA vapor exposure alternated bybefore and after exposure to IPA vapor…………….95 Figure 4.6 a)

Penchev, Miroslav Valentinov

2012-01-01T23:59:59.000Z

244

Chelated Indium Activable Tracers for Geothermal Reservoirs  

E-Print Network [OSTI]

Center (SLAC), for providing the califclmiurh-252 neutron source. Appreciation is extended to Lew, rock size, and temperature on the tracer adsoqjtion and ther- mal degradation. The rock employed for these measurements was gragwacke, a prek valent rock type at The Geysers, California geothermal field. The re

Stanford University

245

Indium Antimonide Nanowires: Synthesis, Characterization, and Applications  

E-Print Network [OSTI]

of Nanoelectronics and Optoelectronics 3 (2008) 119-203. A.in electronics, optoelectronics, and sensing. Indiumelectronics and optoelectronics; it is a direct consequence

Penchev, Miroslav Valentinov

2012-01-01T23:59:59.000Z

246

Sandia National Laboratories: indium tin oxide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbine blade manufacturing the viabilityindium tin oxide Sandian

247

Final Technical Report: Hawaii Hydrogen Center for Development and Deployment of Distributed Energy Systems  

SciTech Connect (OSTI)

Hydrogen power park experiments in Hawai‘i produced real-world data on the performance of commercialized electrochemical components and power systems integrating renewable and hydrogen technologies. By analyzing the different losses associated with the various equipment items involved, this work identifies the different improvements necessary to increase the viability of these technologies for commercial deployment. The stand-alone power system installed at Kahua Ranch on the Big Island of Hawaii required the development of the necessary tools to connect, manage and monitor such a system. It also helped the electrolyzer supplier to adapt its unit to the stand-alone power system application. Hydrogen fuel purity assessments conducted at the Hawai‘i Natural Energy Institute (HNEI) fuel cell test facility yielded additional knowledge regarding fuel cell performance degradation due to exposure to several different fuel contaminants. In addition, a novel fitting strategy was developed to permit accurate separation of the degradation of fuel cell performance due to fuel impurities from other losses. A specific standard MEA and a standard flow field were selected for use in future small-scale fuel cell experiments. Renewable hydrogen production research was conducted using photoelectrochemical (PEC) devices, hydrogen production from biomass, and biohydrogen analysis. PEC device activities explored novel configurations of ‘traditional’ photovoltaic materials for application in high-efficiency photoelectrolysis for solar hydrogen production. The model systems investigated involved combinations of copper-indium-gallium-diselenide (CIGS) and hydrogenated amorphous silicon (a-Si:H). A key result of this work was the establishment of a robust “three-stage” fabrication process at HNEI for high-efficiency CIGS thin film solar cells. The other key accomplishment was the development of models, designs and prototypes of novel ‘four-terminal’ devices integrating high-efficiency CIGS and a-Si:H with operating features compatible with high-efficiency photoelectrochemical (PEC) water-splitting. The objective of one activity under the hydrogen production from biomass task was to conduct parametric testing of the Pearson gasifier and to determine the effects of gasifier operating conditions on the gas yields and quality. The hydrogen yield from this gasifier was evaluated in a parametric test series over a range of residence times from 0.8 to 2.2 seconds. H2 concentrations as high as 55% (volume) were measured in the product gas at the longer residence times and this corresponds to a hydrogen yield of 90 kg per tonne of bagasse without gas upgrading. The objective of another activity was to develop hot gas clean-up capabilities for the HNEI gasifier test facility to support hydrogen-from-biomass research. The product gas stream at the outlet of the hot gas filter was characterized for concentrations of permanent gas species and contaminants. Biomass feedstock processing activity included a preliminary investigation into methods for processing sugar cane trash at the Puunene Sugar Factory on the island of Maui, Hawaii. The objective of the investigation was to explore treatment methods that would enable the successful use of cane trash as fuel for the production of hydrogen via gasification. Analyses were completed for the technical and economic feasibility of producing biofuel from photosynthetic marine microbes on a commercial scale. Results included estimates for total costs, energy efficiency, and return on investment. The biohydrogen team undertook a comprehensive review of the field and came to what is considered a realistic conclusion. To summarize, continued research is recommended in the fundamentals of the science related to genetic engineering and specific topics to cover knowledge gaps. In the meantime, the team also advocates continued development of related processes which can be linked to pollution control and other real world applications. The extra revenues hydrogen can provide to these multi-product systems can

Rocheleau, Richard E.

2008-09-30T23:59:59.000Z

248

Photovoltaic Materials  

SciTech Connect (OSTI)

The goal of the current project was to help make the US solar industry a world leader in the manufacture of thin film photovoltaics. The overall approach was to leverage ORNL’s unique characterization and processing technologies to gain a better understanding of the fundamental challenges for solar cell processing and apply that knowledge to targeted projects with industry members. ORNL has the capabilities in place and the expertise required to understand how basic material properties including defects, impurities, and grain boundaries affect the solar cell performance. ORNL also has unique processing capabilities to optimize the manufacturing process for fabrication of high efficiency and low cost solar cells. ORNL recently established the Center for Advanced Thin-film Systems (CATS), which contains a suite of optical and electrical characterization equipment specifically focused on solar cell research. Under this project, ORNL made these facilities available to industrial partners who were interested in pursuing collaborative research toward the improvement of their product or manufacturing process. Four specific projects were pursued with industrial partners: Global Solar Energy is a solar industry leader in full scale production manufacturing highly-efficient Copper Indium Gallium diSelenide (CIGS) thin film solar material, cells and products. ORNL worked with GSE to develop a scalable, non-vacuum, solution technique to deposit amorphous or nanocrystalline conducting barrier layers on untextured stainless steel substrates for fabricating high efficiency flexible CIGS PV. Ferro Corporation’s Electronic, Color and Glass Materials (“ECGM”) business unit is currently the world’s largest supplier of metallic contact materials in the crystalline solar cell marketplace. Ferro’s ECGM business unit has been the world's leading supplier of thick film metal pastes to the crystalline silicon PV industry for more than 30 years, and has had operational cells and modules in the field for 25 years. Under this project, Ferro leveraged world leading analytical capabilities at ORNL to characterize the paste-to-silicon interface microstructure and develop high efficiency next generation contact pastes. Ampulse Corporation is developing a revolutionary crystalline-silicon (c-Si) thin-film solar photovoltaic (PV) technology. Utilizing uniquely-textured substrates and buffer materials from the Oak Ridge National Laboratory (ORNL), and breakthroughs in Hot-Wire Chemical Vapor Deposition (HW-CVD) techniques in epitaxial silicon developed at the National Renewable Energy Laboratory (NREL), Ampulse is creating a solar technology that is tunable in silicon thickness, and hence in efficiency and economics, to meet the specific requirements of multiple solar PV applications. This project focused on the development of a high rate deposition process to deposit Si, Ge, and Si1-xGex films as an alternate to hot-wire CVD. Mossey Creek Solar is a start-up company with great expertise in the solar field. The primary interest is to create and preserve jobs in the solar sector by developing high-yield, low-cost, high-efficiency solar cells using MSC-patented and -proprietary technologies. The specific goal of this project was to produce large grain formation in thin, net-shape-thickness mc-Si wafers processed with high-purity silicon powder and ORNL's plasma arc lamp melting without introducing impurities that compromise absorption coefficient and carrier lifetime. As part of this project, ORNL also added specific pieces of equipment to enhance our ability to provide unique insight for the solar industry. These capabilities include a moisture barrier measurement system, a combined physical vapor deposition and sputtering system dedicated to cadmium-containing deposits, adeep level transient spectroscopy system useful for identifying defects, an integrating sphere photoluminescence system, and a high-speed ink jet printing system. These tools were combined with others to study the effect of defects on the performance of crystalline silicon and

Duty, C.; Angelini, J.; Armstrong, B.; Bennett, C.; Evans, B.; Jellison, G. E.; Joshi, P.; List, F.; Paranthaman, P.; Parish, C.; Wereszczak, A.

2012-10-15T23:59:59.000Z

249

Organic Light Emitting Diodes Using a Ga:ZnO Anode  

SciTech Connect (OSTI)

We report the application of gallium doped zinc oxide (GZO) films as anodes in organic light emitting diodes (OLEDs). Pulsed laser deposited GZO films of differing Ga composition are examined. Bilayer OLEDs using GZO and indium tin oxide (ITO) anodes are then compared. Relative to ITO, the GZO anodes have slightly better sheet resistance and transparency in the visible spectral region. Device data suggest GZO results in more effective hole injection into an aromatic triamine hole transporting layer. Indium free anodes are expected toimprove OLED stability while lowering the cost per unit area, crucial for OLED based lighting applications.

Berry, J. J.; Ginley, D. S.; Burrows, Paul E.

2008-05-12T23:59:59.000Z

250

NREL Produces Highly Efficient, Wide-Bandgap, Thin-Film Solar Cells (Fact Sheet)  

SciTech Connect (OSTI)

Researchers at the National Renewable Energy Laboratory (NREL) are finding new ways to manufacture thin-film solar cells made from copper, indium, gallium, and selenium - called CIGS cells - that are different than conventional CIGS solar cells. Their use of high-temperature glass, designed by SCHOTT AG, allows higher fabrication temperatures, opening the door to new CIGS solar cells employing light-absorbing materials with wide 'bandgaps.'

Not Available

2012-09-01T23:59:59.000Z

251

Phosphors containing boron and metals of Group IIIA and IIIB  

DOE Patents [OSTI]

A phosphor comprises: (a) at least a first metal selected from the group consisting of yttrium and elements of lanthanide series other than europium; (b) at least a second metal selected from the group consisting of aluminum, gallium, indium, and scandium; (c) boron; and (d) europium. The phosphor is used in light source that comprises a UV radiation source to convert UV radiation to visible light.

Setlur, Anant Achyut; Srivastava, Alok Mani; Comanzo, Holly Ann; Manivannan, Venkatesan

2006-10-31T23:59:59.000Z

252

NREL Spurred the Success of Multijunction Solar Cells (Fact Sheet)  

SciTech Connect (OSTI)

Many scientists once believed that high-quality gallium indium phosphide (GaInP) alloys could not be grown for use as semiconductors because the alloys would separate. However, researchers at the National Renewable Energy Laboratory (NREL) thought differently, and they employed GaInP in a material combination that allowed the multijunction cell to flourish. The multijunction cell is now the workhorse that powers satellites and the catalyst for renewed interest in concentrator photovoltaic products.

Not Available

2013-08-01T23:59:59.000Z

253

Polycrystalline thin-film solar cells and modules  

SciTech Connect (OSTI)

This paper describes the recent technological advances in polycrystalline thin-film solar cells and modules. Three thin film materials, namely, cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS) and silicon films (Si-films) have made substantial technical progress, both in device and module performance. Early stability results for modules tested outdoors by various groups worldwide are also encouraging. The major global players actively involved in the development of the these technologies are discussed. Technical issues related to these materials are elucidated. Three 20-kW polycrystalline thin-film demonstration photovoltaic (PV) systems are expected to be installed in Davis, CA in 1992 as part of the Photovoltaics for Utility-Scale Applications (PVUSA) project. This is a joint project between the US Department of Energy (DOE), Pacific Gas and Electric (PG&E), Electric Power Research Institute (EPRI), California Energy Commission (CEC), and a utility consortium.

Ullal, H.S.; Stone, J.L.; Zweibel, K.; Surek, T.; Mitchell, R.L.

1991-12-01T23:59:59.000Z

254

Polycrystalline thin-film solar cells and modules  

SciTech Connect (OSTI)

This paper describes the recent technological advances in polycrystalline thin-film solar cells and modules. Three thin film materials, namely, cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS) and silicon films (Si-films) have made substantial technical progress, both in device and module performance. Early stability results for modules tested outdoors by various groups worldwide are also encouraging. The major global players actively involved in the development of the these technologies are discussed. Technical issues related to these materials are elucidated. Three 20-kW polycrystalline thin-film demonstration photovoltaic (PV) systems are expected to be installed in Davis, CA in 1992 as part of the Photovoltaics for Utility-Scale Applications (PVUSA) project. This is a joint project between the US Department of Energy (DOE), Pacific Gas and Electric (PG E), Electric Power Research Institute (EPRI), California Energy Commission (CEC), and a utility consortium.

Ullal, H.S.; Stone, J.L.; Zweibel, K.; Surek, T.; Mitchell, R.L.

1991-12-01T23:59:59.000Z

255

Rutherford backscattering analysis of gallium implanted 316 stainless steel  

E-Print Network [OSTI]

Experimental Procedure Sample Analysis 3 3 . 9 . 11 HI THEORY. . IH. 1 Backscattering Principles HI. 2 The RBS Spectrum IH. 3 The Surface Energy Approximation . . . HI. 4 Stainless Steel 316. . IV RESULTS AND DISCUSSION . . 13 . 13 15... for the disposition of weapons grade (WG) plutonium (Pu) in the United States: MOX fuel conversion and immobilization. The first option uses nuclear reactors to transmutate WG Pu and the second imbeds the WG Pu in glass logs for deep burial. Due to the large amount...

Ortensi, Javier

2012-06-07T23:59:59.000Z

256

Gallium Arsenide (GaAs) EDWARD D. PALIK  

E-Print Network [OSTI]

constants of pure (semi-insulating) GaAs are derived from a number of papers including the far-infrared at. [4]; the near-IR work of Pikhtin and Yas'kov [5]; the calorim- etry work of Christensen et al. [6 reflection work of Philipp and Ehrenreich [9]; and the synchrotron transmission work of Cardona et al. [10

Pulfrey, David L.

257

Broadband electrooptic modulators based on gallium arsenide materials  

E-Print Network [OSTI]

Optical Arbitrary Waveform Generation (OAWG) combines frequency combs and frequency-by- frequency pulse shapers to synthesize optical waveforms. The OAWG technique has a wide variety of applications, ranging from high ...

Shamir, Orit A

2012-01-01T23:59:59.000Z

258

Formation mechanisms of spatially-directed zincblende gallium nitride nanocrystals  

SciTech Connect (OSTI)

We report on the spatially selective formation of GaN nanocrystals embedded in GaAs. Broad-area N{sup +} implantation followed by rapid thermal annealing leads to the formation of nanocrystals at the depth of maximum ion damage. With additional irradiation using a Ga{sup +} focused ion beam, selective lateral positioning of the nanocrystals within the GaAs matrix is observed in isolated regions of increased vacancy concentration. Following rapid thermal annealing, the formation of zincblende GaN is observed in the regions of highest vacancy concentration. The nucleation of zincblende nanocrystals over the wurtzite phase of bulk GaN is consistent with the predictions of a thermodynamic model for the nanoscale size-dependence of GaN nucleation.

Wood, A. W. [Department of Physics, University of Michigan, Ann Arbor, Michigan 48109 (United States); Collino, R. R. [Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109 (United States); Cardozo, B. L. [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109 (United States); Naab, F. [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, Michigan 48109 (United States); Wang, Y. Q. [Materials Science and Technology Division, Los Alamos National Lab, Los Alamos, New Mexico 87545 (United States); Goldman, R. S. [Department of Physics, University of Michigan, Ann Arbor, Michigan 48109 (United States); Department of Materials Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109 (United States)

2011-12-15T23:59:59.000Z

259

Self-aligned submicron gate length gallium arsenide MESFET  

E-Print Network [OSTI]

-biaserl saturation currents of 396. 67 + 83. 984 IzA were obtained for the transistors. Built- in voltages of 0. 8198 6 0. 007 V and ideality factors of 1. 456 6 0. 0079 were obtained for the Schottky diodes. The effect of gate length on transcond ictance... Geometrical and physical origins for the small signal equivalent circuit of FET Developed fabrication process for submicron gate length GaAs MESFET Transistor and Schottky diode mask patterns 10 13 15 16 18 19 21 23 23 25 25 32 34 18. Process...

Huang, Hsien-Ching

2012-06-07T23:59:59.000Z

260

Neutron irradiation effects on metal-gallium nitride contacts  

SciTech Connect (OSTI)

We have measured the effect of fast and thermal neutrons on GaN Schottky barriers and ohmic contacts using current–voltage and transmission line method electrical techniques, optical, atomic force and scanning electron microscopy morphological techniques, and X-ray photoemission spectroscopy chemical techniques. These studies reveal a 10{sup 15}?n/cm{sup 2} neutron threshold for Schottky barrier ideality factor increases, a 10{sup 15}?n/cm{sup 2} fast plus thermal neutron threshold for ohmic contact sheet and contact resistance increases, and 10{sup 16}?n/cm{sup 2} neutron fluence threshold for major device degradation identified with thermally driven diffusion of Ga and N into the metal contacts and surface phase changes. These results demonstrate the need for protecting metal-GaN contacts in device applications subject to neutron radiation.

Katz, Evan J.; Lin, Chung-Han; Zhang, Zhichun [Department of Electrical and Computer Engineering, The Ohio State University, Columbus, Ohio 43210 (United States); Qiu, Jie; Cao, Lei [Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, Ohio 43210 (United States); Mishra, Umesh K. [Departments of Electrical and Computer Engineering and Materials Science and Engineering University of California, Santa Barbara, California 93106 (United States); Brillson, Leonard J., E-mail: brillson.1@osu.edu [Department of Electrical and Computer Engineering, The Ohio State University, Columbus, Ohio 43210 (United States); Department of Physics and Center for Materials Research, The Ohio State University, Columbus, Ohio 43210 (United States)

2014-03-28T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Neutron irradiation effects on gallium nitride-based Schottky diodes  

SciTech Connect (OSTI)

Depth-resolved cathodoluminescence spectroscopy (DRCLS), time-resolved surface photovoltage spectroscopy, X-ray photoemission spectroscopy (XPS), and current-voltage measurements together show that fast versus thermal neutrons differ strongly in their electronic and morphological effects on metal-GaN Schottky diodes. Fast and thermal neutrons introduce GaN displacement damage and native point defects, while thermal neutrons also drive metallurgical reactions at metal/GaN interfaces. Defect densities exhibit a threshold neutron fluence below which thermal neutrons preferentially heal versus create new native point defects. Scanning XPS and DRCLS reveal strong fluence- and metal-dependent electronic and chemical changes near the free surface and metal interfaces that impact diode properties.

Lin, Chung-Han; Katz, Evan J.; Zhang, Zhichun [Department of Electrical and Computer Engineering, The Ohio State University, Columbus Ohio 43210 (United States)] [Department of Electrical and Computer Engineering, The Ohio State University, Columbus Ohio 43210 (United States); Qiu, Jie; Cao, Lei [Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, Ohio 43210 (United States)] [Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, Ohio 43210 (United States); Mishra, Umesh K. [Departments of Electrical and Computer Engineering and Materials Science and Engineering, University of California, Santa Barbara, California 93106 (United States)] [Departments of Electrical and Computer Engineering and Materials Science and Engineering, University of California, Santa Barbara, California 93106 (United States); Brillson, Leonard J. [Department of Electrical and Computer Engineering, The Ohio State University, Columbus Ohio 43210 (United States) [Department of Electrical and Computer Engineering, The Ohio State University, Columbus Ohio 43210 (United States); Department of Physics and Center for Materials Research, The Ohio State University, Columbus, Ohio 43210 (United States)

2013-10-14T23:59:59.000Z

262

Superconductivity in gallium-substituted Ba8Si46 clathrates  

E-Print Network [OSTI]

superconductor, with an onset at T-C approximate to 3.3 K. For x=10 and higher, no superconductivity was observed down to T=1.8 K. This represents a strong suppression of superconductivity with increasing Ga content, compared to Ba8Si46 with T-C approximate to 8...

Li, Yang; Zhang, Ruihong; Liu, Yang; Chen, Ning; Luo, Z. P.; Ma, Xingqiao; Cao, Guohui; Feng, Z. S.; Hu, Chia-Ren; Ross, Joseph H., Jr.

2007-01-01T23:59:59.000Z

263

Fabrication of a gated gallium arsenide heterostructure resonant tunneling diode  

E-Print Network [OSTI]

metallization process ivas required because separate potentials must be apphed to the top and base ol' the defined mesas. A potent&al is apphed to the top of the mesas to inject carriers for tunneling through the douhle barrier heterostructures A. rectifying... was a demetal/degrease cleanup process which re- moved any contamination that may have been nn the wal'er. This process ivas followed by deposition of AuGe/Ni on the ivafer's backside which ivill provide an ohmic contact after annealing. The backside...

Kinard, William Brian

1989-01-01T23:59:59.000Z

264

Advanced Epi Tools for Gallium Nitride Light Emitting Diode Devices  

SciTech Connect (OSTI)

Over the course of this program, Applied Materials, Inc., with generous support from the United States Department of Energy, developed a world-class three chamber III-Nitride epi cluster tool for low-cost, high volume GaN growth for the solid state lighting industry. One of the major achievements of the program was to design, build, and demonstrate the world’s largest wafer capacity HVPE chamber suitable for repeatable high volume III-Nitride template and device manufacturing. Applied Materials’ experience in developing deposition chambers for the silicon chip industry over many decades resulted in many orders of magnitude reductions in the price of transistors. That experience and understanding was used in developing this GaN epi deposition tool. The multi-chamber approach, which continues to be unique in the ability of the each chamber to deposit a section of the full device structure, unlike other cluster tools, allows for extreme flexibility in the manufacturing process. This robust architecture is suitable for not just the LED industry, but GaN power devices as well, both horizontal and vertical designs. The new HVPE technology developed allows GaN to be grown at a rate unheard of with MOCVD, up to 20x the typical MOCVD rates of 3{micro}m per hour, with bulk crystal quality better than the highest-quality commercial GaN films grown by MOCVD at a much cheaper overall cost. This is a unique development as the HVPE process has been known for decades, but never successfully commercially developed for high volume manufacturing. This research shows the potential of the first commercial-grade HVPE chamber, an elusive goal for III-V researchers and those wanting to capitalize on the promise of HVPE. Additionally, in the course of this program, Applied Materials built two MOCVD chambers, in addition to the HVPE chamber, and a robot that moves wafers between them. The MOCVD chambers demonstrated industry-leading wavelength yield for GaN based LED wafers and industry-leading uptime enabled in part by a novel in-situ cleaning process developed in this program.

Patibandla, Nag; Agrawal, Vivek

2012-12-01T23:59:59.000Z

265

Vacancy-Induced Nanoscale Wire Structure in Gallium Selenide Layers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II Field

266

Vacancy-Induced Nanoscale Wire Structure in Gallium Selenide Layers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II FieldVacancy-Induced Nanoscale Wire Structure in

267

Vacancy-Induced Nanoscale Wire Structure in Gallium Selenide Layers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II FieldVacancy-Induced Nanoscale Wire Structure

268

Vacancy-Induced Nanoscale Wire Structure in Gallium Selenide Layers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II FieldVacancy-Induced Nanoscale Wire

269

Sandia National Laboratories: BES Web Highlight: Single-mode gallium  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive SolarEducation Programs: CroSSlinksHumannitride nanowire lasers

270

Vacancy-Induced Nanoscale Wire Structure in Gallium Selenide Layers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates byUserUtility-Scale SolarProgram

271

Local environment and composition of magnesium gallium layered double  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6,Local Correlations and Multi-FractalLocalhydroxides

272

Electrochemical Solution Growth: Gallium Nitride Crystal Growth - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing Zirconia Nanoparticles as Selective Sorbents . | EMSL forInnovation

273

High-Quality, Low-Cost Bulk Gallium Nitride Substrates  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:Ground Hawaii HIGHBraytonMaterials

274

Light-Emitting Diodes on Semipolar Bulk Gallium Nitride Substrate |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy Health andofIanJenniferLeslie Pezzullo:

275

High-efficiency solar cell and method for fabrication  

DOE Patents [OSTI]

A high-efficiency 3- or 4-junction solar cell is disclosed with a theoretical AM0 energy conversion efficiency of about 40%. The solar cell includes p-n junctions formed from indium gallium arsenide nitride (InGaAsN), gallium arsenide (GaAs) and indium gallium aluminum phosphide (InGaAlP) separated by n-p tunnel junctions. An optional germanium (Ge) p-n junction can be formed in the substrate upon which the other p-n junctions are grown. The bandgap energies for each p-n junction are tailored to provide substantially equal short-circuit currents for each p-n junction, thereby eliminating current bottlenecks and improving the overall energy conversion efficiency of the solar cell. Additionally, the use of an InGaAsN p-n junction overcomes super-bandgap energy losses that are present in conventional multi-junction solar cells. A method is also disclosed for fabricating the high-efficiency 3- or 4-junction solar cell by metal-organic chemical vapor deposition (MOCVD).

Hou, Hong Q. (Albuquerque, NM); Reinhardt, Kitt C. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

276

High-efficiency solar cell and method for fabrication  

DOE Patents [OSTI]

A high-efficiency 3- or 4-junction solar cell is disclosed with a theoretical AM0 energy conversion efficiency of about 40%. The solar cell includes p-n junctions formed from indium gallium arsenide nitride (InGaAsN), gallium arsenide (GaAs) and indium gallium aluminum phosphide (InGaAlP) separated by n-p tunnel junctions. An optional germanium (Ge) p-n junction can be formed in the substrate upon which the other p-n junctions are grown. The bandgap energies for each p-n junction are tailored to provide substantially equal short-circuit currents for each p-n junction, thereby eliminating current bottlenecks and improving the overall energy conversion efficiency of the solar cell. Additionally, the use of an InGaAsN p-n junction overcomes super-bandgap energy losses that are present in conventional multi-junction solar cells. A method is also disclosed for fabricating the high-efficiency 3- or 4-junction solar cell by metal-organic chemical vapor deposition (MOCVD). 4 figs.

Hou, H.Q.; Reinhardt, K.C.

1999-08-31T23:59:59.000Z

277

A high frequency titration of indium with benzenephosphinic acid  

E-Print Network [OSTI]

with ordinary oxidizing agents as hydrogen peroxide and nitric acid. (31) Michaells and Ananoff first reported the preparation and properties of benzenepbosphinic acid in 1874 (25). Kichaells prepared the potassium, barium, calcium, and iron salts... in approximately 25 milliliters of the acid These solutions were heated on a hot plate until dry. The salt was dissolved in dis- tilled water, and diluted to one liter in a volumetric flask. These solutions were standardised volumetrically with EDTA (13...

Keilt, Francis Xavier

1960-01-01T23:59:59.000Z

278

Spectroscopic properties of colloidal indium phosphide quantum wires  

E-Print Network [OSTI]

Wires Fudong Wang, §‡ Heng Yu, §† Jingbo Li, ?? QinglingQuantum Wires Fudong Wang, Heng Yu, Jingbo Li, Qingling

Weng, Fudong

2008-01-01T23:59:59.000Z

279

Efficient Electro-Optical Modulation Based on Indium Tin Oxide  

E-Print Network [OSTI]

We experimentally demonstrate several electro-optical modulators based on transparent conducting oxides. Our previous work demonstrated the modulator structure on glass substrate with broadband bias polarity-dependent modulation. Further exploration shows similar modulation effect of the modulator on quartz and silicon substrate.

Shi, Kaifeng

2015-01-01T23:59:59.000Z

280

Ohmic contact metallization on p-type indium phosphide  

E-Print Network [OSTI]

contact resistivities comparable to those of Au-based contacts, determined by the Cox and Strack structure, can be obtained for a pure Pd contact on p-InP (hole concentration -3xlOl' cm-'). The defects can be identified to be related with phosphorus...

Park, Moonho

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Highly efficient blue organic light emitting devices with indium...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

zinc oxide (GZO) uniformly over a 12” diameter area at room temperature on polyethylene terephthalate (PET). During deposition, the system heats to about 60oC due to the...

282

INDIUM--2002 37.1 By John D. Jorgenson  

E-Print Network [OSTI]

smelter (Platts Metals Week, 2001). Shortly after closure of the smelter, the EPA declared cleanup. Although some firms have bid on the cleanup of the smelter site, none have submitted a proposal

283

Thermal neutron flux perturbation due to indium foils in water  

E-Print Network [OSTI]

press) 13. Axford, R. A. , and Day, G. M. , personnel communication. 14. Ritchie, R. H. , Thermal Neutron Flux De ression, Health Physics Division Annual Prog. Rep. July, 1958, ORNL-2806, p. 133. 27 i 5, Walker, J. V. , "The Measurement of Absolute... Fluxes in Water and Graphite, " 'ORNL- 2842, 204 (f959). ...

Stinson, Ronald Calvin

1961-01-01T23:59:59.000Z

284

Synthesis and characterization of single-crystal indium nitride nanowires  

E-Print Network [OSTI]

in visible light range, and high-efficiency solar cells.2 Furthermore, InN has distinct advantages over Ga-solid (VLS) approach using a single-zone furnace at 500 °C,6 and a diameter distribution from 40 to 80 nm-zone furnace for InN nanowire synthe- sis. This technique allowed us to use a high-temperature zone (700 °C

Zhou, Chongwu

285

Indium Phosphide Polycrystalline Films on Metal Foil for PV Applications -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinementEtching.348ASSEMBLY [ICO] Name LastNews

286

Indium Growth and Island Height Control on Si Submonolayer Phases  

SciTech Connect (OSTI)

Nanotechnology refers any technique that involves about object with nanoscale (10{sup -9} m) or even smaller. It has become more and more important in recently years and has changed our world dramatically. Most of modern electronic devices today should thanks to the miniaturizing driven by development of nanotechnology. Recent years, more and more governments are investing huge amount of money in research related to nanotechnology. There are two major reasons that nanostructure is so fascinate. The first one is the miniaturizing. It is obvious that if we can make products smaller without losing the features, we can save the cost and increase the performance dramatically. For an example, the first computer in the world, ENIAC, which occupied several rooms, is less powerful than the cheapest calculator today. Today's chips with sizes of less than half an inch contain millions of basic units. All these should thank to the development of nanotechnology. The other reason is that when we come to nanoscale, there are many new effects due to the quantum effect which can't be found in large systems. For an example, quantum dots (QDs) are systems which sizes are below 1{micro}m(10{sup -6}m) and restricted in three dimensions. There are many interesting quantum effects in QDs, including discrete energy levels, and interdot coupling. Due to these properties and their small sizes, QDs have varies potential applications such as quantum computing, probe, light emitting device, solar cells, and laser. To meet the requirement of the nanoelectrical applications, the QDs must be grown highly uniformly because their property is highly dependent on their sizes. The major methods to grow uniform QDs include epitaxial, and lithograph. Lithography is a process to make patterns on a thin film by selectively removing certain parts of the film. Using this method, people have good control over size, location and spacing of QDs. For an example, the Extreme ultraviolet lithography (EUVL) have a wave length of 13.4nm so it can curve on the surface of an sample to make structure as small as the order of 10nm. however, lithograph usually causes permanent damages to the surface and in many cases the QDs are damaged during the lithograph and therefore result in high percentage of defects. Quantum size effect has attracted more and more interests in surface science due to many of its effects. One of its effects is the height preference in film growing and the resulting possibility of uniformly sized self-assemble nanostructure. The experiment of Pb islands on In 4x1 phase shows that both the height and the width can be controlled by proper growth conditions, which expands the growth dimensions from 1 to 2. This discover leads us to study the In/Pb interface. In Ch.3, we found that the Pb islands growing on In 4x1-Si(111) surface which have uniform height due to QSE and uniform width due to the constriction of In 4x1 lattice have unexpected stability. These islands are stable in even RT, unlike usual nanostructures on Pb/Si surface which are stable only at low temperature. Since similar structures are usually grown at low temperature, this discovery makes the grown structures closer to technological applications. It also shows the unusual of In/Pb interface. Then we studied the In islands grown on Pb-{alpha}-{radical}3x{radical}3-Si(111) phase in Ch.4. These islands have fcc structure in the first few layers, and then convert to bct structure. The In fcc islands have sharp height preference due to QSE like Pb islands. However, the preferred height is different (7 layer for Pb on Si 7x7 and 4 layer for Pb on In 4x1), due to the difference of interface. The In islands structure prefers to be bct than fcc with coverage increase. It is quantitatively supported by first-principle calculation. Unexpectedly, the In islands grown on various of In interfaces didn't show QSE effects and phase transition from fcc and bct structures as on the Pb-{alpha} interface (Ch.6). In g(s) curve there is no clear oscillations in the g(s) curve as the In on Pb-{alpha} phase. This

Chen, Jizhou

2009-05-09T23:59:59.000Z

287

Europium-activated phosphors containing oxides of rare-earth and group-IIIB metals and method of making the same  

DOE Patents [OSTI]

Europium-activated phosphors comprise oxides of at least a rare-earth metal selected from the group consisting of gadolinium, yttrium, lanthanum, and combinations thereof and at least a Group-IIIB metal selected from the group consisting of aluminum, gallium, indium, and combinations thereof. A method for making such phosphors comprises adding at least a halide of at least one of the selected Group-IIIB metals in a starting mixture. The method further comprises firing the starting mixture in an oxygen-containing atmosphere. The phosphors produced by such a method exhibit improved absorption in the UV wavelength range and improved quantum efficiency.

Comanzo, Holly Ann; Setlur, Anant Achyut; Srivastava, Alok Mani; Manivannan, Venkatesan

2004-07-13T23:59:59.000Z

288

Europium-activated phosphors containing oxides of rare-earth and group-IIIB metals and method of making the same  

DOE Patents [OSTI]

Europium-activated phosphors comprise oxides of at least a rare-earth metal selected from the group consisting of gadolinium, yttrium, lanthanum, and combinations thereof and at least a Group-IIIB metal selected from the group consisting of aluminum, gallium, indium, and combinations thereof. A method for making such phosphors comprises adding at least a halide of at least one of the selected Group-IIIB metals in a starting mixture. The method further comprises firing the starting mixture in an oxygen-containing atmosphere. The phosphors produced by such a method exhibit improved absorption in the UV wavelength range and improved quantum efficiency.

Comanzo, Holly Ann; Setlur, Anant Achyut; Srivastava, Alok Mani

2006-04-04T23:59:59.000Z

289

NREL Scientists Spurred the Success of Multijunction Solar Cells (Fact Sheet)  

SciTech Connect (OSTI)

Before 1984, many scientists believed that high-quality gallium indium phosphide (GaInP) alloys could not be grown for use as semiconductors because the alloys would separate. One researcher at the Solar Energy Research Institute (SERI) thought differently. His name was Jerry Olson, and his innovative thinking changed solar history. Olson identified a material combination that allowed the multijunction cell to flourish. It is now the workhorse that powers satellites and the catalyst for renewed interest in concentrator photovoltaic (CPV) products.

Not Available

2012-09-01T23:59:59.000Z

290

Improved method of preparing p-i-n junctions in amorphous silicon semiconductors  

DOE Patents [OSTI]

A method of preparing p/sup +/-i-n/sup +/ junctions for amorphous silicon semiconductors includes depositing amorphous silicon on a thin layer of trivalent material, such as aluminum, indium, or gallium at a temperature in the range of 200/sup 0/C to 250/sup 0/C. At this temperature, the layer of trivalent material diffuses into the amorphous silicon to form a graded p/sup +/-i junction. A layer of n-type doped material is then deposited onto the intrinsic amorphous silicon layer in a conventional manner to finish forming the p/sup +/-i-n/sup +/ junction.

Madan, A.

1984-12-10T23:59:59.000Z

291

By Robert D. Brown, Jr. Domestic indium production was confined 227, containing 20% indium, 2.8% silver, and  

E-Print Network [OSTI]

doors on commercial refrigerators and freezers frost free. Infrared reflecting coatings on window glass

292

Recombination in Low-Bandgap InGaAs  

SciTech Connect (OSTI)

We review our investigation of recombination in In{sub x}Ga{sub 1-x}As with indium concentrations ranging between x=0.53 (i.e., lattice-matched to InP) and x=0.78. External radiative efficiency measurements were used to study how defect-related and Auger mechanisms compete with radiative recombination. The results indicated that deep mid-gap levels facilitate defect-related recombination in lattice-matched InGaAs while shallower levels play a more important role in the indium-rich alloys. Subsequent sub-bandgap photoluminescence measurements confirmed the presence of deep levels in the lattice-matched InGaAs. The superlinear excitation dependence of the sub-gap emission led to a defect-related deep-donor/shallow-acceptor pair model. Recent cathodoluminescence measurements of the subgap transitions show no spatial contrast, supporting the assignment of this mechanism to evenly distributed point defects. We hypothesize that the deep states observed in lattice-matched InGaAs are related to imperfections in the incorporation of indium or gallium, which become less likely as the indium concentration is increased.

Gfroerer, T. H.; Wanlass, M. W.

2006-01-01T23:59:59.000Z

293

US polycrystalline thin film solar cells program  

SciTech Connect (OSTI)

The Polycrystalline Thin Film Solar Cells Program, part of the United States National Photovoltaic Program, performs R D on copper indium diselenide and cadmium telluride thin films. The objective of the Program is to support research to develop cells and modules that meet the US Department of Energy's long-term goals by achieving high efficiencies (15%-20%), low-cost ($50/m{sup 2}), and long-time reliability (30 years). The importance of work in this area is due to the fact that the polycrystalline thin-film CuInSe{sub 2} and CdTe solar cells and modules have made rapid advances. They have become the leading thin films for PV in terms of efficiency and stability. The US Department of Energy has increased its funding through an initiative through the Solar Energy Research Institute in CuInSe{sub 2} and CdTe with subcontracts to start in Spring 1990. 23 refs., 5 figs.

Ullal, H.S.; Zweibel, K.; Mitchell, R.L. (Solar Energy Research Inst., Golden, CO (USA)) [Solar Energy Research Inst., Golden, CO (USA)

1989-11-01T23:59:59.000Z

294

Recycling of cadmium and selenium from photovoltaic modules and manufacturing wastes  

SciTech Connect (OSTI)

Since the development of the first silicon based photovoltaic cell in the 1950's, large advances have been made in photovoltaic material and processing options. At present there is growing interest in the commercial potential of cadmium telluride (CdTe) and copper indium diselenide (CIS) photovoltaic modules. As the commercial potential of these technologies becomes more apparent, interest in the environmental, health and safety issues associated with their production, use and disposal has also increased because of the continuing regulatory focus on cadmium and selenium. In future, recycling of spent or broken CdTe and CIS modules and manufacturing wastes may be needed for environmental, economic or political reasons. To assist industry to identify recycling options early in the commercialization process, a Workshop was convened. At this Workshop, representatives from the photovoltaic, electric utility, and nonferrous metals industries met to explore technical and institutional options for the recycling of spent CdTe and CIS modules and manufacturing wastes. This report summarizes the results of the Workshop. This report includes: (1) A discussion of the Resource Conservation and Recovery Act regulations and their potential implications to the photovoltaic industry; (2) an assessment of the needs of the photovoltaic industry from the perspective of module manufacturers and consumers; (3) an overview of recycling technologies now employed by other industries for similar types of materials; and, (4) a list of recommendation.

Moskowitz, P.D.; Zweibel, K. (eds.)

1992-01-01T23:59:59.000Z

295

Development of New Low-Cost, High-Performance, PV Module Encapsulant/Packaging Materials: Annual Technical Progress Report, Phase 1, 22 October 2002-30 September 2003  

SciTech Connect (OSTI)

The primary objectives of this subcontract are for Specialized Technology Resources, Inc., to work with U.S.-based PV module manufacturers representing crystalline silicon, polycrystalline silicon, amorphous silicon, copper indium diselenide (CIS), and other state-of-the-art thin-film technologies to develop formulations, production processes, prototype and qualify new low-cost, high-performance photovoltaic module encapsulants/packaging materials. The manufacturers will assist in identifying each materials' deficiencies while undergoing development, and then ultimately in qualifying the final optimized materials designed to specifically meet their requirements. Upon completion of this program, new low-cost, high-performance, PV module encapsulant/packaging materials will be qualified, by one or more end-users, for their specific application. Information gathering on topics related to thin-film module technology, including device performance/failure analysis, glass stability, and de vice encapsulation, has been completed. This information has provided concepts and considerations for module failure analysis, accelerated testing design, and encapsulation formulation strategy for thin-film modules.

Agro, S. C.; Tucker, R. T.

2004-03-01T23:59:59.000Z

296

Metal-insulator transitions in IZO, IGZO, and ITZO films  

SciTech Connect (OSTI)

In this study, we measured the low-temperature resistivity of amorphous two- and three-dimensional (2D and 3D) indium-zinc oxide, indium-gallium-zinc oxide, and indium-tin-zinc oxide films with a wide range of carrier densities. To determine their critical characteristics at the metal-insulator transition (MIT), we used the Ioffe–Regel criterion. We found that the MIT occurs in a narrow range between k{sub F}??=?0.13 and k{sub F}??=?0.25, where k{sub F} and ? are the Fermi wave number and electron mean free path, respectively. For films in the insulating region, we analyzed ?(T) using a procedure proposed by Zabrodskii and Zinov'eva. This analysis confirmed the occurrence of Mott and Efros–Shklovskii (ES) variable-range hopping. The materials studied show crossover behavior from exp(T{sub Mott}/T){sup 1/4} or exp(T{sub Mott}/T){sup 1/3} for Mott hopping conduction to exp(T{sub ES}/T){sup 1/2} for ES hopping conduction with decreasing temperature. For both 2D and 3D materials, we found that the relationship between T{sub Mott} and T{sub ES} satisfies T{sub ES}???T{sub Mott}{sup 2/3}.

Makise, Kazumasa, E-mail: makise@nict.go.jp [National Institute of Information and Communications Technology, Kobe 651-2492 (Japan); Hidaka, Kazuya; Ezaki, Syohei; Asano, Takayuki; Shinozaki, Bunju [Department of Physics, Kyushu University, Fukuoka 810-8560 (Japan); Tomai, Shigekazu; Yano, Koki; Nakamura, Hiroaki [Central Research Laboratories, Idemitsu Kosan Co. Ltd, Chiba 299-0293 (Japan)

2014-10-21T23:59:59.000Z

297

(Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 1996. Two companies in  

E-Print Network [OSTI]

in optoelectronic devices, which include light-emitting diodes (LED's), laser diodes, photodetectors, and solar in research and development, specialty alloys, and other applications. Optoelectronic devices were used

298

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2006. One company in Utah  

E-Print Network [OSTI]

circuits. Optoelectronic devices, which include light-emitting diodes (LEDs), laser diodes, photodetectors, specialty alloys, and other applications. Optoelectronic devices were used in areas such as aerospace

299

(Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 1998. Two companies in  

E-Print Network [OSTI]

in optoelectronic devices, which include light-emitting diodes (LED's), laser diodes, photodetectors, and solar and development, specialty alloys, and other applications. Optoelectronic devices were used in areas

300

(Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2000. Two companies in  

E-Print Network [OSTI]

in optoelectronic devices, which include light-emitting diodes (LED's), laser diodes, photodetectors, and solar and development, specialty alloys, and other applications. Optoelectronic devices were used in areas

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

(Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2003. One company in  

E-Print Network [OSTI]

in optoelectronic devices, which include light-emitting diodes (LEDs), laser diodes, photodetectors, and solar cells, specialty alloys, and other applications. Optoelectronic devices were used in areas such as aerospace

302

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2012. One company in Utah  

E-Print Network [OSTI]

consumed was used in integrated circuits (ICs). Optoelectronic devices, which include laser diodes, light. Optoelectronic devices were used in areas such as aerospace, consumer goods, industrial equipment, medical

303

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2008. One company in Utah  

E-Print Network [OSTI]

circuits (ICs). Optoelectronic devices, which include laser diodes, light-emitting diodes (LEDs and development, specialty alloys, and other applications. Optoelectronic devices were used in areas

304

(Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2001. Two companies in  

E-Print Network [OSTI]

in optoelectronic devices, which include light-emitting diodes (LEDs), laser diodes, photodetectors, and solar cells, specialty alloys, and other applications. Optoelectronic devices were used in areas such as consumer goods

305

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2005. One company in Utah  

E-Print Network [OSTI]

circuits. Optoelectronic devices, which include light-emitting diodes (LEDs), laser diodes, photodetectors, specialty alloys, and other applications. Optoelectronic devices were used in areas such as aerospace

306

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2007. One company in Utah  

E-Print Network [OSTI]

circuits (ICs). Optoelectronic devices, which include light-emitting diodes (LEDs), laser diodes and development, specialty alloys, and other applications. Optoelectronic devices were used in areas

307

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2009. One company in Utah  

E-Print Network [OSTI]

circuits (ICs). Optoelectronic devices, which include laser diodes, light-emitting diodes (LEDs and development, specialty alloys, and other applications. Optoelectronic devices were used in areas

308

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2010. One company in Utah  

E-Print Network [OSTI]

circuits (ICs). Optoelectronic devices, which include laser diodes, light-emitting diodes (LEDs and development, specialty alloys, and other applications. Optoelectronic devices were used in areas

309

(Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 1999. Two companies in  

E-Print Network [OSTI]

in optoelectronic devices, which include light-emitting diodes (LED's), laser diodes, photodetectors, and solar and development, specialty alloys, and other applications. Optoelectronic devices were used in areas

310

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2011. One company in Utah  

E-Print Network [OSTI]

consumed was used in integrated circuits (ICs). Optoelectronic devices, which include laser diodes, light% was used in research and development, specialty alloys, and other applications. Optoelectronic devices were

311

(Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 1997. Two companies in  

E-Print Network [OSTI]

in optoelectronic devices, which include light-emitting diodes (LED's), laser diodes, photodetectors, and solar and development, specialty alloys, and other applications. Optoelectronic devices were used in areas

312

(Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2004. One company in Utah  

E-Print Network [OSTI]

consumed was used in optoelectronic devices, which include light-emitting diodes (LEDs), laser diodes% was used in research and development, specialty alloys, and other applications. Optoelectronic devices were

313

Synthesis and characterization of visible emission from rare-earth doped aluminum nitride, gallium nitride and gallium aluminum nitride powders and thin films  

E-Print Network [OSTI]

74 (19) 2821 (1999). F. H. Spedding, Rare-earth Elements, inby the use of rare- earth elements as color emitters inpowders activated with rare-earth elements Eu 3+ , Tb 3+ ,

Tao, Jonathan Huai-Tse

2010-01-01T23:59:59.000Z

314

Synthesis and characterization of visible emission from rare-earth doped aluminum nitride, gallium nitride and gallium aluminum nitride powders and thin films  

E-Print Network [OSTI]

residential lighting using incandescent lights [2], as shownenergy used for the incandescent lamp is wasted as infraredlight source to replace incandescent lighting [1]. Figure

Tao, Jonathan Huai-Tse

2010-01-01T23:59:59.000Z

315

(Data in metric tons, unless noted) Domestic Production and Use: No indium was recovered from ores in the United States in 1995. Domestic indium  

E-Print Network [OSTI]

, refinery NA NA NA NA -- Imports for consumption 36.3 36.3 73.4 70.2 73.0 Exports NA NA NA NA NA marketed through a U.S. company. World Refinery Production, Reserves, and Reserve Base: Refinery

316

SAGE: Solar Neutrino Data from SAGE, the Russian-American Gallium Solar Neutrino Experiment  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

SAGE is a solar neutrino experiment based on the reaction 71Ga + n goes to 71Ge + e-. The 71Ge atoms are chemically extracted from a 50-metric ton target of Ga metal and concentrated in a sample of germane gas mixed with xenon. The atoms are then individually counted by observing their decay back to 71Ga in a small proportional counter. The distinguishing feature of the experiment is its ability to detect the low-energy neutrinos from proton-proton fusion. These neutrinos, which are made in the primary reaction that provides the Sun's energy, are the major component of the solar neutrino flux and have not been observed in any other way. To shield the experiment from cosmic rays, it is located deep underground in a specially built facility at the Baksan Neutrino Observatory in the northern Caucasus mountains of Russia. Nearly 100 measurements of the solar neutrino flux have been made during 1990-2000, and their combined result is a neutrino capture rate that is well below the prediction of the Standard Solar Model. The significant suppression of the solar neutrino flux that SAGE and other solar neutrino experiments have observed gives a strong indication for the existence of neutrino oscillations. [copied from the SAGE homepage at http://ewi.npl.washington.edu/SAGE/SAGE.html

SAGE Collaboration

317

Non-Destructive Spent Fuel Characterization with Semi-Conducting Gallium Arsinde Neutron Imaging Arrays  

SciTech Connect (OSTI)

High resistivity bulk grown GaAs has been used to produce thermal neutron imaging devices for use in neutron radiography and characterizing burnup in spent fuel. The basic scheme utilizes a portable Sb/Be source for monoenergetic (24 keV) neutron radiation source coupled to an Fe filter with a radiation hard B-coated pixellated GaAs detector array as the primary neutron detector. The coated neutron detectors have been tested for efficiency and radiation hardness in order to determine their fitness for the harsh environments imposed by spent fuel. Theoretical and experimental results are presented, showing detector radiation hardness, expected detection efficiency and the spatial resolution from such a scheme. A variety of advanced neutron detector designs have been explored, with experimental results achieving 13% thermal neutron detection efficiency while projecting the possibility of over 30% thermal neutron detection efficiency.

Douglas S. McGregor; Holly K. Gersch; Jeffrey D. Sanders; John C. Lee; Mark D. Hammig; Michael R. Hartman; Yong Hong Yang; Raymond T. Klann; Brian Van Der Elzen; John T. Lindsay; Philip A. Simpson

2002-01-30T23:59:59.000Z

318

The marine geochemistry of dissolved gallium: A comparison with dissolved aluminum  

SciTech Connect (OSTI)

Dissolved Ga concentrations in the pacific Ocean range from 2 to 30 picomolar: they are low in surface waters (2-12 pM), with a subsurface maximum at 150-300 m (6-17 pM), a mid-depth minimum from 500 to 1,000 m (4-10 pM) and increasing values with depth to a maximum in the bottom waters (12-30 pM). The highest concentrations are in the central gyre, with lower values toward the north and east where productivity and particle scavenging increase. Dissolved Ga concentrations in the surface waters of the northwest Atlantic are nearly an order of magnitude higher than in the central North pacific, with higher values in the Gulf Stream than in the continental slope boundary region. The vertical distributions and horizontal transects indicate three sources of dissolved Ga to the oceans. The surface distribution reflects an eolian source with no net fluvial input to the open ocean; the subsurface maximum (a feature not seen for North Pacific dissolved Al) is attributed to vertical exchange processes; the source for the deep waters of the North Pacific is from a sediment surface remineralization process or a pore water flux. Scavenging removal throughout the water column is evident in the vertical profiles for both dissolved Ga and Al, with intensified removal in the boundary regions where productivity and particle scavenging are at a maximum. Residence times of dissolved Ga in surface waters are nearly an order of magnitude longer than the corresponding values for Al.

Orians, K.J.; Bruland, K.W. (Univ. of California, Santa Cruz (USA))

1988-12-01T23:59:59.000Z

319

Tungsten-incorporation induced red-shift in the bandgap of gallium oxide thin films  

SciTech Connect (OSTI)

Tungsten (W) incorporated Ga{sub 2}O{sub 3} films were produced by co-sputter deposition. W-concentration was varied by the applied sputtering-power. The structure and optical properties of W-incorporated Ga{sub 2}O{sub 3} films were evaluated using X-ray diffraction, scanning electron microscopy, and spectrophotometric measurements. No secondary phase formation was observed in W-incorporated Ga{sub 2}O{sub 3} films. W-induced effects were significant on the structure and optical properties of Ga{sub 2}O{sub 3} films. The bandgap of Ga{sub 2}O{sub 3} films without W-incorporation was {approx}5 eV. Red-shift in the bandgap was noted with increasing W-concentration indicating the electronic structure changes in W-Ga{sub 2}O{sub 3} films. A functional relationship between W-concentration and optical property is discussed.

Rubio, E. J.; Ramana, C. V. [Department of Mechanical Engineering, University of Texas at El Paso, El Paso, Texas 79968 (United States)] [Department of Mechanical Engineering, University of Texas at El Paso, El Paso, Texas 79968 (United States)

2013-05-13T23:59:59.000Z

320

Radiation-Hardened Gallium Nitride Detector and Arrays for Fusion Diagnostics  

SciTech Connect (OSTI)

This poster reports testing to confirm that GaN devices exhibit the extreme radiation hardness needed for use at the NIF, functioning properly after 1x10{sup 12} protons/cm{sup 2} proton irradiation in one year.

Sun, K. X., and MacNeil, L.

2011-09-08T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Process development for the fabrication of monolithic optoelectronic resonators on gallium arsenide substrates  

E-Print Network [OSTI]

loss microwave structure, were electroplated on the uncovered regions of the Au-Ge and Ni. After photoresist removal, the Au-Ge and Ni layers were removed from the unwanted regions. A backside metal was deposited and the sample was annealed. The four... D. Electron Bes. m Evaporation E. Fabrication of Photolithographic Masks 1, Plain Ring Resonator Mask 2. Notched Resons. tor Mask 3. Linear Resonator Mask 4. Slit Ring Resonator Mask F. Photolithography G. Electroplating H. Layer Removals I...

Fairchild, Brock Wilson

1990-01-01T23:59:59.000Z

322

The determination of titanium, germanium and gallium by charged particle activation analysis  

E-Print Network [OSTI]

V FWHM for the 1. 332 MeV y-ray of Co; Peak-to-Compton ratio: 20. 1; 60 Efficiency relative to a 3 x 3 inch NaI (Tl) detector for the 1. 332 MeV y-ray measured at 25 cm distance: 3 05%%d Data Ac uisition and Processin Data was acquired via a 4096... of the reaction had to be sufficiently high to make measurements of ppm level concentrations feasible. The thick target yields were calculated by correlating the activities of the particular Y-rays 16 back to the time at the end of the irradiation...

Novak, Leo Robert

1975-01-01T23:59:59.000Z

323

The equilibrium state of hydrogen in gallium nitride: Theory and experiment  

SciTech Connect (OSTI)

Formation energies and vibrational frequencies for H in wurtzite GaN were calculated from density functional theory and used to predict equilibrium state occupancies and solid solubilities for p-type, intrinsic, and n-type material. The solubility of deuterium (D) was measured at 600--800 C as a function of D{sub 2} pressure and doping and compared with theory. Agreement was obtained by reducing the H formation energies 0.2 eV from ab-initio theoretical values. The predicted stretch-mode frequency for H bound to the Mg acceptor lies 5% above an observed infrared absorption attributed to this complex. It is concluded that currently recognized H states and physical processes account for the equilibrium behavior of H examined in this work.

MYERS JR.,SAMUEL M.; WRIGHT,ALAN F.; PETERSEN,GARY A.; SEAGER,CARLETON H.; WAMPLER,WILLIAM R.; CRAWFORD,MARY H.; HAN,JUNG

2000-04-17T23:59:59.000Z

324

Diffusion, Uptake and Release of Hydrogen in p-type Gallium Nitride: Theory and Experiment  

SciTech Connect (OSTI)

The diffusion, uptake, and release of H in p-type GaN are modeled employing state energies from density-function theory and compared with measurements of deuterium uptake and release using nuclear-reaction analysis. Good semiquantitative agreement is found when account is taken of a surface permeation barrier.

MYERS JR.,SAMUEL M.; WRIGHT,ALAN F.; PETERSEN,GARY A.; WAMPLER,WILLIAM R.; SEAGER,CARLETON H.; CRAWFORD,MARY H.; HAN,JUNG

2000-06-27T23:59:59.000Z

325

Sparse gallium arsenide to silicon metal waferbonding for heterogeneous monolithic microwave integrated circuits  

E-Print Network [OSTI]

and Applications, edited by T. M. Tritt, ( Kluwer Academic /and Applications, edited by T. M. Tritt, ( Kluwer Academic /and Applications, edited by T. M. Tritt, ( Kluwer Academic /

Bickford, Justin Robert

2008-01-01T23:59:59.000Z

326

Growth Kinetics and Doping of Gallium Nitride Grown by rf-Plasma Assisted Molecular Beam Epitaxy  

E-Print Network [OSTI]

Thomas H. Myers, Ph.D., Chair Larry E. Halliburton, Ph.D. Nancy C. Giles, Ph.D. Charter D. Stinespring Giles, Dr. Charter Stinespring, Dr. Larry Halliburton, and Dr. Mohindar Seehra. In addition, I would

Myers, Tom

327

Fabrication of an optically driven 10 GHz ring resonator on a gallium arsenide substrate  

E-Print Network [OSTI]

/D converters, optical detectors, dc to rf converters, and millimeter-wave or microwave generators. Photoconductors can be easily integrated with microelectronic devices as well as microwave circuits. Recently, an optically excited photoconductive switch... is the barrier height and y, is the electron affinity for the semiconductor. Current flow at a metal-semiconductor barrier is due mainly to majority carriers. The four major current transport methods are thermionic emission over the barrier, quantum...

McGregor, Douglas Scott

1989-01-01T23:59:59.000Z

328

Gallium-68 Bioorthogonal Tetrazine Polymers for the Multistep Labeling of Cancer Biomarkers /  

E-Print Network [OSTI]

M, Fox JM (2008) Tetrazine ligation: fast bioconjugationR, Hilderbrand SA (2008) Tetrazine-Based Cycloadditions:of Cancer Cells through a Tetrazine/trans- Cyclooctene

Nichols, Brandon Edward

2013-01-01T23:59:59.000Z

329

Sparse gallium arsenide to silicon metal waferbonding for heterogeneous monolithic microwave integrated circuits  

E-Print Network [OSTI]

is limited by the cold-wall chamber design and the porousrepeatability. The cold-wall chamber design also limits the

Bickford, Justin Robert

2008-01-01T23:59:59.000Z

330

Gallium arsenide-based ternary compounds and multi-band-gap solar cell research  

SciTech Connect (OSTI)

Aim of this contract is the achievement of a high-efficiency, low-cost solar cell. The basic approach to the problem is centered upon the heteroepitaxial growth of a III-V compound material onto a single-crystal silicon wafer. The growth technique employed is metalorganic chemical vapor deposition. The silicon wafer may serve as a mechanical substrate and ohmic contact for a single-junction device, or may contain a p-n junction of its own and form the bottom cell of a two junction tandem solar cell structure. The III-V material for the single-junction case is GaAs and for the two-junction case is either GaAlAs or GaAsP, either material having the proper composition to yield a band gap of approximately 1.7 eV. Results achieved in this contract include the following: (1) a 17.6% efficient GaAs-on-Si solar cell; (2) an 18.5% efficient GaAs-on-Si concentrator solar cell at 400 suns; (3) a 24.8% efficient GaAs-on-GaAs solar cell; (4) a 28.7% efficient GaAs-on-GaAs concentrator solar cell at 200 suns; (5) measurement of the effects of dislocation density and emitter doping on GaAs cells; and (6) improvements in the growth process to achieve reproducible thin AlGaAs window layers with low recombination velocities and environmental stability.

Vernon, S. (Spire Corp., Bedford, MA (United States))

1993-02-01T23:59:59.000Z

331

Gallium surface diffusion on GaAs (001) surfaces measured by crystallization dynamics of Ga droplets  

SciTech Connect (OSTI)

We present accurate measurements of Ga cation surface diffusion on GaAs surfaces. The measurement method relies on atomic force microscopy measurement of the morphology of nano–disks that evolve, under group V supply, from nanoscale group III droplets, earlier deposited on the substrate surface. The dependence of the radius of such nano-droplets on crystallization conditions gives direct access to Ga diffusion length. We found an activation energy for Ga on GaAs(001) diffusion E{sub A}=1.31±0.15 eV, a diffusivity prefactor of D{sub 0}?=?0.53(×2.1±1) cm{sup 2} s{sup ?1} that we compare with the values present in literature. The obtained results permit to better understand the fundamental physics governing the motion of group III ad–atoms on III–V crystal surfaces and the fabrication of designable nanostructures.

Bietti, Sergio, E-mail: sergio.bietti@mater.unimib.it; Somaschini, Claudio; Esposito, Luca; Sanguinetti, Stefano [L–NESS and Dipartimento di Scienza dei Materiali, Università di Milano Bicocca, Via Cozzi 55, I–20125 Milano (Italy); Fedorov, Alexey [L–NESS and CNR–IFN, via Anzani 42, I-22100 Como (Italy)

2014-09-21T23:59:59.000Z

332

Heat treatment of bulk gallium arsenide using a phosphosilicate glass cap  

SciTech Connect (OSTI)

n-type bulk GaAs crystals, capped with chemically vapor-deposited phosphosilicate glass, were heat treated at temperatures in the range of 600 to 950 /sup 0/C. Measurements on Schottky diodes and solar cells fabricated on the heat-treated material, after removal of a damaged surface layer, show an increase in free-carrier concentration, in minority-carrier-diffusion length, and in solar-cell short-circuit current. The observed changes are attributed to a removal of lifetime-reducing acceptorlike impurities, defects, or their complexes.

Mathur, G.; Wheaton, M.L.; Borrego, J.M.; Ghandhi, S.K.

1985-05-15T23:59:59.000Z

333

The Hall mobility measurement of Liquid Phase Epitaxy grown aluminum gallium arsenide  

E-Print Network [OSTI]

allows lasing action at or above room temperature. The utility of AI?Ga& ?As is based on the close latti&e match to GaAs over a range of Al mole fraction between zero and one(Fig. 1)IS). This is significant since heterojunctions between s...-type by occupying the site normally orc?pi& d by th& gro?p V element, ar?l acting as a donor. For the p-type of AI?Ga& ?As. %1g was used as an i&np?ri&y. Fig. 10 and Fig. 11 show I he r&'lal ionship bet wc?n th& in&p?r&I& & o???& r?t ?&n??&l t he alorr&i& weight...

Choi, Young-Shig

2012-06-07T23:59:59.000Z

334

Gallium Arsenide-Based Readout Electronics Thomas J. Cunningham and Eric R. Fossum  

E-Print Network [OSTI]

susceptible to radiation and hot carrier damage than are MaS-based structures. This should result in increased;among these has been the construction of optical emitters such as LEDs and lasers, since efficient

Fossum, Eric R.

335

E-Print Network 3.0 - abdominal gallium-67 citrate Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of the Mg2+ Summary: Chapter iii Impact of the Mg2+ -citrate transporter CitM on heavy metal toxicity in Bacillus... M that is specific for the complex of citrate and Mg2+ but is...

336

Commercialization of gallium nitride nanorod arrays on silicon for solid-state lighting  

E-Print Network [OSTI]

One important component in energy usage is lighting, which is currently dominated by incandescent and fluorescent lamps. However, due to potentially higher efficiencies and thus higher energy savings, solid-state lighting ...

Wee, Qixun

2008-01-01T23:59:59.000Z

337

Dependence of carrier mobility on an electric field in gallium selenide crystals  

SciTech Connect (OSTI)

The dependence of the mobility of charge carriers on voltage has been studied in undoped GaSe single crystals and crystals doped with gadolinium; the latter crystals have exhibited various values of dark resistivity ({rho}{sub d.r} Almost-Equal-To 10{sup 4}-10{sup 8} {Omega} cm at 77 K) and of the doping level (N = 10{sup -5}, 10{sup -4}, 10{sup -3}, 10{sup -2}, and 10{sup -1} at %). It is established that the dependence of the charge-carrier mobility on the electric field applied to the sample E {<=} 10{sup 2} V/cm is observed in undoped high-resistivity GaSe crystals ({rho}{sub d.r} {>=} 10{sup 4} {Omega} cm) and in lightly doped GaSe crystals (N {<=} 10{sup -2} at %) in the region of T {<=} 150 K. It is found that this dependence is not related to heating of the charge carriers by an electric field; rather, it is caused by elimination of drift barriers as a result of injection.

Abdinov, A. Sh., E-mail: abdinov_axmed@yahoo.com; Babaeva, R. F., E-mail: Babaeva-Rena@yandex.ru; Rzayev, R. M. [Baku State University (Azerbaijan)

2012-06-15T23:59:59.000Z

338

High-Quality, Low-Cost Bulk Gallium Nitride Substrates | Department of  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many| Department HIGHImageDepartmentEnergy

339

Accelerated Testing of HT-9 with Zirconia Coatings Containing Gallium using  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre the Effects ofAbout ScienceAbout OakMeasurement

340

Nanovoid Formation and Annihilation in Gallium Nanodroplets under Lithiation-Delithiation Cycling  

E-Print Network [OSTI]

, United States Renewable Energy Laboratory, Institute of Physics, Chinese Academy of Sciences, Beijing-to-solid phase transition, forming a crystalline phase (LixGa) with 160% volume expansion. Owing to the uneven Li delithiation, the reverse phase transition occurred, accompanied with the nucleation and growth of a nanosized

Chen, Long-Qing

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Gallium Safety in the Laboratory INEEL/CON-03-00078  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: Crystal structureComposite--FOR IMMEDIATEDOEFinal R eport

342

Effect of Gallium Nitride Template Layer Strain on the Growth of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed NewcatalystNeutronEnvironmentZIRKLE FRUITYear 1MATERIALSTiO2(110).

343

E-Print Network 3.0 - analysis gallium-67 lung Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ILD... , interstitial lung disease, texture analysis, co-occurrence matrix, computed tomography I. INTRODUCTION Computer... %. The aim of our work is to develop a novel texture ......

344

Gallium solar neutrino experiments: Absorption cross sections, neutrino spectra, and predicted event rates  

E-Print Network [OSTI]

solar neutrino sources with standard energy spectra, and for laboratory sources of 51 Cr and 37 Ar; the calculations include, where appropriate, the thermal energy of fusing solar ions and use improved nuclear the energy spectrum of solar neutrinos. Theoretical uncertainties are estimated for cross sections

Bahcall, John

345

LIFE CYCLE INVENTORY ANALYSIS IN THE PRODUCTION OF METALS USED IN PHOTOVOLTAICS.  

SciTech Connect (OSTI)

Material flows and emissions in all the stages of production of zinc, copper, aluminum, cadmium, indium, germanium, gallium, selenium, tellurium, and molybdenum were investigated. These metals are used selectively in the manufacture of solar cells, and emission and energy factors in their production are used in the Life Cycle Analysis (LCA) of photovoltaics. Significant changes have occurred in the production and associated emissions for these metals over the last 10 years, which are not described in the LCA databases. Furthermore, emission and energy factors for several of the by-products of the base metal production were lacking. This report aims in updating the life-cycle inventories associated with the production of the base metals (Zn, Cu, Al, Mo) and in defining the emission and energy allocations for the minor metals (Cd, In, Ge, Se, Te and Ga) used in photovoltaics.

FTHENAKIS,V.M.; KIM, H.C.; WANG, W.

2007-03-30T23:59:59.000Z

346

Radiolabeled red blood cells: status, problems, and prospects  

SciTech Connect (OSTI)

Radionuclidic labels for red cells can be divided into two main categories - cohort or pulse labels, and random labels. The random labels are incorporated into circulating cells of all ages and the labeling process is usually carried out in vitro. The red cell labels in predominant use involve random labeling and employ technetium-99m, chromium-51, indium-111, and gallium-68, roughly in that order. The extent of usefulness depends on the properties of the label such as the half-life, decay mode, and in-vivo stability, etc. Labeled cells can be used for red cell survival measurements when the half-life of the radionuclide is sufficiently long. The major portion of this article deals with random labels.

Srivastava, S.C.

1983-01-01T23:59:59.000Z

347

Nanoscale-accuracy transfer printing of ultra-thin AlInGaN light-emitting diodes onto mechanically flexible substrates  

SciTech Connect (OSTI)

The transfer printing of 2 ?m-thick aluminum indium gallium nitride (AlInGaN) micron-size light-emitting diodes with 150?nm (±14?nm) minimum spacing is reported. The thin AlInGaN structures were assembled onto mechanically flexible polyethyleneterephthalate/polydimethylsiloxane substrates in a representative 16 × 16 array format using a modified dip-pen nano-patterning system. Devices in the array were positioned using a pre-calculated set of coordinates to demonstrate an automated transfer printing process. Individual printed array elements showed blue emission centered at 486?nm with a forward-directed optical output power up to 80??W (355 mW/cm{sup 2}) when operated at a current density of 20?A/cm{sup 2}.

Trindade, A. J., E-mail: antonio.trindade@strath.ac.uk; Guilhabert, B.; Massoubre, D.; Laurand, N.; Gu, E.; Watson, I. M.; Dawson, M. D. [Institute of Photonics, SUPA, University of Strathclyde, 106 Rottenrow, Glasgow G4 0NW (United Kingdom)] [Institute of Photonics, SUPA, University of Strathclyde, 106 Rottenrow, Glasgow G4 0NW (United Kingdom); Zhu, D.; Humphreys, C. J. [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom)] [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom)

2013-12-16T23:59:59.000Z

348

The effects of buffer layers on the performance and stability of flexible InGaZnO thin film transistors on polyimide substrates  

SciTech Connect (OSTI)

We demonstrated the fabrication of flexible amorphous indium gallium zinc oxide thin-film transistors (TFTs) on high-temperature polyimide (PI) substrates, which were debonded from the carrier glass after TFT fabrication. The application of appropriate buffer layers on the PI substrates affected the TFT performance and stability. The adoption of the SiN{sub x}/AlO{sub x} buffer layers as water and hydrogen diffusion barriers significantly improved the device performance and stability against the thermal annealing and negative bias stress, compared to single SiN{sub x} or SiO{sub x} buffer layers. The substrates could be bent down to a radius of curvature of 15?mm and the devices remained normally functional.

Ok, Kyung-Chul; Park, Jin-Seong, E-mail: hkim-2@naver.com, E-mail: jsparklime@hanyang.ac.kr [Division of Materials Science and Engineering, Hanyang University, 222, Wangsimni-ro, Seongdong-gu, Seoul 133-791 (Korea, Republic of); Ko Park, Sang-Hee; Kim, H., E-mail: hkim-2@naver.com, E-mail: jsparklime@hanyang.ac.kr [Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Hwang, Chi-Sun [Transparent Electronics Team, ETRI, Daejeon 305-350 (Korea, Republic of); Soo Shin, Hyun; Bae, Jonguk [LG Display R and D Center, LG Display Co., Ltd., Paju 413-811 (Korea, Republic of)

2014-02-10T23:59:59.000Z

349

I-III-VI.sub.2 based solar cell utilizing the structure CuInGaSe.sub.2 CdZnS/ZnO  

DOE Patents [OSTI]

A thin film I-III-VI.sub.2 based solar cell having a first layer of copper indium gallium selenide, a second layer of cadmium zinc sulfide, a double layer of zinc oxide, and a metallization structure comprised of a layer of nickel covered by a layer of aluminum. An optional antireflective coating may be placed on said metallization structure. The cadmium zinc sulfide layer is deposited by means of an aqueous solution growth deposition process and may actually consist of two layers: a low zinc content layer and a high zinc content layer. Photovoltaic efficiencies of 12.5% at Air Mass 1.5 illumination conditions and 10.4% under AMO illumination can be achieved.

Chen, Wen S. (Seattle, WA); Stewart, John M. (Seattle, WA)

1992-01-07T23:59:59.000Z

350

Exchanging Ohmic Losses in Metamaterial Absorbers with Useful Optical Absorption for Photovoltaics  

E-Print Network [OSTI]

Using metamaterial absorbers, we have shown that metallic layers in the absorbers do not necessarily constitute undesired resistive heating problem for photovoltaics. Tailoring the geometric skin depth of metals and employing the natural bulk absorbance characteristics of the semiconductors in those absorbers can enable the exchange of undesired resistive losses with the useful optical absorbance in the active semiconductors. Thus, Ohmic loss dominated metamaterial absorbers can be converted into photovoltaic near-perfect absorbers with the advantage of harvesting the full potential of light management offered by the metamaterial absorbers. Based on experimental permittivity data for indium gallium nitride, we have shown that between 75%-95% absorbance can be achieved in the semiconductor layers of the converted metamaterial absorbers. Besides other metamaterial and plasmonic devices, our results may also apply to photodectors and other metal or semiconductor based optical devices where resistive losses and p...

Vora, Ankit; Pala, Nezih; Kulkarni, Anand; Pearce, Joshua M; Güney, Durdu Ö

2014-01-01T23:59:59.000Z

351

Innovation in photoelectrodes for the splitting of water  

SciTech Connect (OSTI)

Generation of hydrogen from a renewable energy source is highly desirable because hydrogen is a basic fuel. Past work has shown that certain semiconductor electrodes will generate hydrogen directly upon illumination; however, the efficiency of such systems is low. This work explored an idea based on a 'hot electron gun' where freshly generated hot electrons are made to interact with water. The work attempted to show, through the use of three semiconductors (germanium, gallium arsenide, and silicon), that hot electrons could be tunneled into the electrolyte. Numerous thin metals were used to form a tunneling interface. Particularly interesting results were obtained with a titanium-palladium double layer and with indium-tin oxide. The presence of hot-electron activity was detected and the threshold voltage for hydrogen generation was reduced to below half a volt.

Lindmayer, J.

1986-10-15T23:59:59.000Z

352

Investigation of channel width-dependent threshold voltage variation in a-InGaZnO thin-film transistors  

SciTech Connect (OSTI)

This Letter investigates abnormal channel width-dependent threshold voltage variation in amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors. Unlike drain-induced source barrier lowering effect, threshold voltage increases with increasing drain voltage. Furthermore, the wider the channel, the larger the threshold voltage observed. Because of the surrounding oxide and other thermal insulating material and the low thermal conductivity of the IGZO layer, the self-heating effect will be pronounced in wider channel devices and those with a larger operating drain bias. To further clarify the physical mechanism, fast IV measurement is utilized to demonstrate the self-heating induced anomalous channel width-dependent threshold voltage variation.

Liu, Kuan-Hsien; Chou, Wu-Ching [Department of Electrophysics, National Chiao Tung University, Hsinchu, Taiwan (China); Chang, Ting-Chang, E-mail: tcchang@mail.phys.nsysu.edu.tw [Department of Physics, National Sun Yat-Sen University, Kaohsiung 804, Taiwan (China); Advanced Optoelectronics Technology Center, National Cheng Kung University, Taiwan (China); Wu, Ming-Siou; Hung, Yi-Syuan; Sze, Simon M. [Department of Electronics Engineering, National Chiao Tung University, Hsinchu, Taiwan (China); Hung, Pei-Hua; Chu, Ann-Kuo [Department of Photonics, National Sun Yat-Sen University, Kaohsiung 804, Taiwan (China); Hsieh, Tien-Yu [Department of Physics, National Sun Yat-Sen University, Kaohsiung 804, Taiwan (China); Yeh, Bo-Liang [Advanced Display Technology Research Center, AU Optronics, No. 1, Li-Hsin Rd. 2, Hsinchu Science Park, Hsinchu 30078, Taiwan (China)

2014-03-31T23:59:59.000Z

353

A modeling approach for the purification of group III metals (Ga and In) by zone refining  

SciTech Connect (OSTI)

An 'experimental friendly' model for zone refining process is proposed which predicts effective zone length in each refining passes that would lead to maximal solute removal, thereby leading to ultrapurification of the material for use in high-end electronic applications. The effectiveness of the model is experimentally tested and validated by purifying gallium from 4N (99.99%) to 6N5 (99.99995%) purity level at 30% yield and {approx}6 N at 70% yield with respect to targeted metallic impurities such as, Zn, Cu, Al, Ca, Bi, Si, Pb, Ni, Mn, and Fe, as analyzed by inductively coupled plasma optical emission spectrometry, graphite furnace atomic absorption spectrometry, and high resolution inductively coupled plasma mass spectrometry techniques. The distribution coefficient (k) of all the targeted impurities, detected in the purified gallium, was found to be less than 1. By comparing the experimentally obtained axial concentration profiles with the theoretical calculations, the k values of some detected impurities, such as Ca and Al, are determined to be {approx}0.8, Pb and Bi to be 0.7, Cu to be 0.65, and Fe to be 0.68, which prove the efficiency of the proposed model in reducing the concentration of these vulnerable impurities significantly. Following the model and as evidenced from the theoretical predictions, degradation of material purification containing a mixture of impurities having k less than as well as greater than 1 was elucidated experimentally by zone refining of 4N6 indium. Only a 40% yield of 5N6 indium was obtained, thereby highlighting the intricacies and problem areas in ultrapurification of these types of material.

Ghosh, K.; Dhar, S. [Department of Electronic Science, University of Calcutta, 92 A. P. C. Road, Kolkata 700009 (India); Mani, V. N. [Ultra-pure Materials Division, Centre for Materials for Electronics Technology (C-MET), IDA Phase-III, Cherlapally, HCL (Post), Hyderabad 500051 (India)

2008-07-15T23:59:59.000Z

354

Polycrystalline thin-film technology: Recent progress in photovoltaics  

SciTech Connect (OSTI)

Polycrystalline thin films have made significant technical progress in the past year. Three of these materials that have been studied extensively for photovoltaic (PV) power applications are copper indium diselenide (CuInSe{sub 2}), cadmium telluride (CdTe), and thin-film polycrystalline silicon (x-Si) deposited on ceramic substrates. The first of these materials, polycrystalline thin-film CuInSe{sub 2}, has made some rapid advances in terms of high efficiency and long-term reliability. For CuInSe{sub 2} power modules, a world record has been reported on a 0.4-m{sup 2} module with an aperture-area efficiency of 10.4% and a power output of 40.4 W. Additionally, outdoor reliability testing of CuInSe{sub 2} modules, under both loaded and open-circuit conditions, has resulted in only minor changes in module performance after more than 1000 days of continuous exposure to natural sunlight. CdTe module research has also resulted in several recent improvements. Module performance has been increased with device areas reaching nearly 900 cm{sup 2}. Deposition has been demonstrated by several different techniques, including electrodeposition, spraying, and screen printing. Outdoor reliability testing of CdTe modules was also carried out under both loaded and open-circuit conditions, with more than 600 days of continuous exposure to natural sunlight. These tests were also encouraging and indicated that the modules were stable within measurement error. The highest reported aperture-area module efficiency for CdTe modules is 10%; the semiconductor material was deposited by electrodeposition. A thin-film CdTe photovoltaic system with a power output of 54 W has been deployed in Saudi Arabia for water pumping. The Module Development Initiative has made significant progress in support of the Polycrystalline Thin-Film Program in the past year, and results are presented in this paper.

Mitchell, R.L.; Zweibel, K.; Ullal, H.S.

1991-12-01T23:59:59.000Z

355

InGaAsN/GaAs heterojunction for multi-junction solar cells  

DOE Patents [OSTI]

An InGaAsN/GaAs semiconductor p-n heterojunction is disclosed for use in forming a 0.95-1.2 eV bandgap photodetector with application for use in high-efficiency multi-junction solar cells. The InGaAsN/GaAs p-n heterojunction is formed by epitaxially growing on a gallium arsenide (GaAs) or germanium (Ge) substrate an n-type indium gallium arsenide nitride (InGaAsN) layer having a semiconductor alloy composition In.sub.x Ga.sub.1-x As.sub.1-y N.sub.y with 070%.

Kurtz, Steven R. (Albuquerque, NM); Allerman, Andrew A. (Albuquerque, NM); Klem, John F. (Albuquerque, NM); Jones, Eric D. (Edgewood, NM)

2001-01-01T23:59:59.000Z

356

INDIUM--2003 36.1 References that include a section mark () are found in the Internet  

E-Print Network [OSTI]

. Crews, statistical assistant, and the world production table was prepared by Glenn J. Wallace energy savings, various national governments have targeted solid-state technologies, which include light-emitting diodes (LEDs), for increased research funding and development. A proposal for a program to fund solid

357

The role of correlation entropy in nuclear fusion in liquid lithium, indium and mercury  

E-Print Network [OSTI]

Nuclear fusion cross-sections considerably higher than corresponding theoretical predictions are observed in low-energy experiments with metal matrix targets and accelerated deuteron beams. The cross-section increment is significantly higher for liquid than for solid targets. We propose that the same two-body correlation entropy used in evaluating the metal melting entropy explains the large liquid-solid difference of the effective screening potential that parameterizes the cross-section increment. This approach is applied to the specific case of the $^6$Li(d,$\\alpha$)$^4$He reaction, whose measured screening potential liquid-solid difference is $(235 \\pm 63)$ eV. Cross sections in the two metals with the highest two-body correlation entropy (In and Hg) have not yet been measured: increments of the cross sections in liquid relative to the ones in solid metals are estimated with the same procedure.

M. Coraddu; M. Lissia; P. Quarati; A. M. Scarfone

2015-01-19T23:59:59.000Z

358

Lithium inclusion in indium metal-organic frameworks showing increased surface area and hydrogen adsorption  

SciTech Connect (OSTI)

Investigation of counterion exchange in two anionic In-Metal-Organic Frameworks (In-MOFs) showed that partial replacement of disordered ammonium cations was achieved through the pre-synthetic addition of LiOH to the reaction mixture. This resulted in a surface area increase of over 1600% in (Li [In(1,3 ? BDC){sub 2}]){sub n} and enhancement of the H{sub 2} uptake of approximately 275% at 80?000 Pa at 77 K. This method resulted in frameworks with permanent lithium content after repeated solvent exchange as confirmed by inductively coupled plasma mass spectrometry. Lithium counterion replacement appears to increase porosity after activation through replacement of bulkier, softer counterions and demonstrates tuning of pore size and properties in MOFs.

Bosch, Mathieu; Zhang, Muwei; Feng, Dawei; Yuan, Shuai; Wang, Xuan [Department of Chemistry, Texas A and M University, College Station, Texas 77842 (United States); Chen, Ying-Pin [Department of Materials Science and Engineering, Texas A and M University, College Station, Texas 77842 (United States); Zhou, Hong-Cai, E-mail: zhou@mail.chem.tamu.edu [Department of Chemistry, Texas A and M University, College Station, Texas 77842 (United States); Department of Materials Science and Engineering, Texas A and M University, College Station, Texas 77842 (United States)

2014-12-01T23:59:59.000Z

359

Indium phosphide based integrated photonic devices for telecommunications and sensing applications  

E-Print Network [OSTI]

Photonics is an exciting area of study that is situated at the cross-section of physics, material science, and electrical engineering. The integration of photonic devices serves to reduce the size, weight, power consumption, ...

Shih, Ta-Ming, Ph. D. Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

360

Core-Shell Nanopillar Array Solar Cells using Cadmium Sulfide Coating on Indium Phosphide Nanopillars  

E-Print Network [OSTI]

for efficient photovoltaic cells. ,” Nature Nanotechnology,Part II – Photovoltaic Cell I-V Characterization Theory andof the photovoltaic effect in the 19 th century, solar cells

Tu, Bor-An Clayton

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Extremely Efficient Indium-Tin-Oxide-Free Green Phosphorescent Organic Light-Emitting Diodes  

SciTech Connect (OSTI)

This paper demonstrates extremely efficient (?P,max = 118 lm W?1) ITO-free green phosphorescent OLEDs (PHOLEDs) with multilayered, highly conductive poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) films as the anode. The efficiency is obtained without any outcoupling-enhancing structures and is 44% higher than the 82 lm W?1 of similar optimized ITO-anode PHOLEDs. Detailed simulations show that this improvement is due largely to the intrinsically enhanced outcoupling that results from a weak microcavity effect.

Cai, Min; Ye, Zhuo; Xiao, Teng; Liu, Rui; Chen, Ying; Mayer, Robert W.; Biswas, Rana; Ho, Kai-Ming; Shinar, Ruth; Shinar, Joseph

2012-07-12T23:59:59.000Z

362

Method of forming electrical pathways in indium-tin-oxide coatings  

DOE Patents [OSTI]

An electrical device includes a substrate having an ITO coating thereon, a portion of which is conductive and defines at least one electrical pathway, the balance of the ITO being insulative. The device is made by the following general steps: (a) providing a substrate having a conductive ITO coating on at least one surface thereof; (b) rendering a preselected portion of the coating of conductive ITO insulative, leaving the remaining portion of conductive ITO as at least one electrical pathway. 8 figs.

Haynes, T.E.

1997-03-04T23:59:59.000Z

363

Method of forming electrical pathways in indium-tin-oxide coatings  

DOE Patents [OSTI]

An electrical device includes a substrate having an ITO coating thereon, a portion of which is conductive and defines at least one electrical pathway, and the balance of the ITO being insulative. The device is made by the following general steps: a. providing a substrate having a conductive ITO coating on at least one surface thereof; b. rendering a preselected portion of the coating of conductive ITO insulative, leaving the remaining portion of conductive ITO as at least one electrical pathway. 8 figs.

Haynes, T.E.

1996-12-03T23:59:59.000Z

364

Method of forming electrical pathways in indium-tin-oxide coatings  

DOE Patents [OSTI]

An electrical device includes a substrate having an ITO coating thereon, a portion of which is conductive and defines at least one electrical pathway, and the balance of the ITO being insulative. The device is made by the following general steps: a. providing a substrate having a conductive ITO coating on at least one surface thereof; b. rendering a preselected portion of the coating of conductive ITO insulative, leaving the remaining portion of conductive ITO as at least one electrical pathway.

Haynes, Tony E. (Knoxville, TN)

1996-01-01T23:59:59.000Z

365

Method of forming electrical pathways in indium-tin-oxide coatings  

DOE Patents [OSTI]

An electrical device includes a substrate having an ITO coating thereon, a portion of which is conductive and defines at least one electrical pathway, and the balance of the ITO being insulative. The device is made by the following general steps: a. providing a substrate having a conductive ITO coating on at least one surface thereof; b. rendering a preselected portion of the coating of conductive ITO insulative, leaving the remaining portion of conductive ITO as at least one electrical pathway.

Haynes, Tony E. (Knoxville, TN)

1997-01-01T23:59:59.000Z

366

E-Print Network 3.0 - adoptively transferred indium-111 Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Agreements Obtaining a specific... Material Transfer Agreement (MTA) for each exchange of materials between academic and other non... considerations among researchers at...

367

Photoelectrochemistry in particulate systems. 7. Electron-transfer reactions of indium sulfide semiconductor colloids  

SciTech Connect (OSTI)

Small semiconductor colloids of In/sub 2/S/sub 3/ have been prepared in aqueous and nonaqueous media and their absorption properties characterized. A transient photobleaching and formation of S/sup .-/ and S/sub 2/H/sub 2//sup .-/ radicals have been observed upon laser pulse (355 nm) excitation of these colloids. With the aid of transient absorption spectra, the anodic corrosion process in these semiconductor colloids has been elucidated by using laser flash photolysis and pulse radiolysis techniques. With the use of a zwitterionic viologen compound, the interfacial charge-transfer process at the semiconductor surface has been studied. The quantum yield for the reduction of zwitterionic viologen was 0.07, which is similar to the value obtained with other metal chalcogenide semiconductor colloids. The microenvironment of the stabilizer (Nafion) influenced the charge-transfer process between the semiconductor and the redox decay.

Kamat, P.V.; Dimitrijevic, N.M.; Fessenden, R.W.

1988-04-21T23:59:59.000Z

368

Highly transparent Nb-doped indium oxide electrodes for organic solar cells  

SciTech Connect (OSTI)

The authors investigated the characteristics of Nb-doped In{sub 2}O{sub 3} (INbO) films prepared by co-sputtering of Nb{sub 2}O{sub 5} and In{sub 2}O{sub 3} for use in transparent anodes for organic solar cells (OSCs). To optimize the Nb dopant composition in the In{sub 2}O{sub 3} matrix, the effect of the Nb doping power on the resistivity and transparency of the INbO films were examined. The electronic structure and microstructure of the INbO films were also investigated using synchrotron x-ray absorption spectroscopy and x-ray diffraction examinations in detail. At the optimized Nb co-sputtering power of 30?W, the INbO film exhibited a sheet resistance of 15??/sq, and an optical transmittance of 86.04% at 550?nm, which are highly acceptable for the use as transparent electrodes in the fabrication of OSCs. More importantly, the comparable power conversion efficiency (3.34%) of the OSC with an INbO anode with that (3.31%) of an OSC with a commercial ITO anode indicates that INbO films are promising as a transparent electrode for high performance OSCs.

Kim, Jun Ho; Seong, Tae-Yeon [Department of Materials Science and Engineering, Korea University, Seoul 136-713 (Korea, Republic of); Na, Seok-In [Professional Graduate School of Flexible and Printable Electronics, Chonbuk National University, 664-14, Deokjin-dong, Jeongju-si, Jellabuk-do 561-756 (Korea, Republic of); Chung, Kwun-Bum [Department of Physics, Dankook University, Mt. 29, Anseo-Dong, Chenan 330-714 (Korea, Republic of); Lee, Hye-Min; Kim, Han-Ki, E-mail: imdlhkkim@khu.ac.kr [Department of Advanced Materials Engineering for Information and Electronics, Kyung Hee University, 1 Seocheon-dong, Yongin, Gyeonggi-do 446-701 (Korea, Republic of)

2014-03-15T23:59:59.000Z

369

High thermoelectric performance by resonant dopant indium in nanostructured SnTe  

E-Print Network [OSTI]

From an environmental perspective, lead-free SnTe would be preferable for solid-state waste heat recovery if its thermoelectric figure-of-merit could be brought close to that of the lead-containing chalcogenides. In this ...

Liao, Bolin

370

Naval Research Laboratory`s programs in advanced indium phosphide solar cell development  

SciTech Connect (OSTI)

The Naval Research Laboratory has been involved in developing InP solar cell technology since 1988. The purpose of these programs was to produce advanced cells for use in very high radiation environments, either as a result of operating satellites in the Van Allen belts or for very long duration missions in other orbits. Richard Statler was technical representative on the first program, with Spire Corporation as the contractor, which eventually produced several hundred, high efficiency 2 x 2 sq cm single crystal InP cells. The shallow homojunction technology which was developed in this program enabled cells to be made with AMO, one sun efficiencies greater than 19%. Many of these cells have been flown on space experiments, including PASP Plus, which have confirmed the high radiation resistance of InP cells. NRL has also published widely on the radiation response of these cells and also on radiation-induced defect levels detected by DLTS, especially the work of Rob Walters and Scott Messenger. In 1990 NRL began another Navy-sponsored program with Tim Coutts and Mark Wanlass at the National Renewable Energy Laboratory (NREL), to develop a one sun, two terminal space version of the InP-InGaAs tandem junction cell being investigated at NREL for terrestrial applications. These cells were grown on InP substrates. Several cells with AMO, one sun efficiencies greater than 22% were produced. Two 2 x 2 sq cm cells were incorporated on the STRV lA/B solar cell experiment. These were the only two junction, tandem cells on the STRV experiment. The high cost and relative brittleness of InP wafers meant that if InP cell technology were to become a viable space power source, the superior radiation resistance of InP would have to be combined with a cheaper and more robust substrate. The main technical challenge was to overcome the effect of the dislocations produced by the lattice mismatch at the interface of the two materials.

Summers, G.P.

1995-10-01T23:59:59.000Z

371

Preparation and characterization of indium zinc oxide thin films by electron beam evaporation technique  

SciTech Connect (OSTI)

In this work, the preparation of In{sub 2}O{sub 3}-ZnO thin films by electron beam evaporation technique on glass substrates is reported. Optical and electrical properties of these films were investigated. The effect of dopant amount and annealing temperature on the optical and electrical properties of In{sub 2}O{sub 3}-ZnO thin films was also studied. Different amount of ZnO was used as dopant and the films were annealed at different temperature. The results showed that the most crystalline, transparent and uniform films with lowest resistivity were obtained using 25 wt% of ZnO annealed at 500 {sup o}C.

Keshavarzi, Reza [Chemistry Department, Catalysis Division, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of)] [Chemistry Department, Catalysis Division, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of); Mirkhani, Valiollah, E-mail: mirkhani@sci.ui.ac.ir [Chemistry Department, Catalysis Division, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of)] [Chemistry Department, Catalysis Division, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of); Moghadam, Majid, E-mail: moghadamm@sci.ui.ac.ir [Chemistry Department, Catalysis Division, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of) [Chemistry Department, Catalysis Division, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of); Department of Nanotechnology Engineering, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of); Tangestaninejad, Shahram; Mohammadpoor-Baltork, Iraj [Chemistry Department, Catalysis Division, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of)] [Chemistry Department, Catalysis Division, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of); Fallah, Hamid Reza; Dastjerdi, Mohammad Javad Vahid; Modayemzadeh, Hamed Reza [Department of Physics, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of)] [Department of Physics, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of)

2011-04-15T23:59:59.000Z

372

Indium-Vanadium Oxides Deposited by Radio Frequency Sputtering: New Thin Film Transparent  

E-Print Network [OSTI]

in many works, metal/vanadium mixed oxides have favorable properties when used as charge storage, 144 (No. 12), 4099. (2) Opara Krasovec, U.; Orel, B.; Reisfeld, R. Electrochem. Solid- State Let

Artuso, Florinda

373

Fabrication of indium sulfide nanofibers via a hydrothermal method assisted by AAO template  

SciTech Connect (OSTI)

{beta}-In{sub 2}S{sub 3} nanofibers were successfully synthesized via a hydrothermal method with AAO membrane as a template at 150 deg. C for 15 h. XRD patterns indicated the perfect crystallization of {beta}-In{sub 2}S{sub 3}. SEM images showed that the {beta}-In{sub 2}S{sub 3} nanofibers grew up from the channel ends of the AAO template. TEM images confirmed that the nanofibers had a high aspect ratio of ca. 40-50 and diameters of about 10 nm. The room temperature photoluminescence (PL) spectrum of the {beta}-In{sub 2}S{sub 3} nanofibers indicated its potential applications in light-emission devices.

Zhu Xiaoyi [Institute of Material Science and Engineering, Ocean University of China, Qingdao 266003 (China); Ma Junfeng [Institute of Material Science and Engineering, Ocean University of China, Qingdao 266003 (China) and College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao 266003 (China)]. E-mail: majf@mail.ouc.edu.cn; Wang Yonggang [Institute of Material Science and Engineering, Ocean University of China, Qingdao 266003 (China); Tao Jiantao [Institute of Material Science and Engineering, Ocean University of China, Qingdao 266003 (China); Zhou Jun [College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao 266003 (China); Zhao Zhongqiang [College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao 266003 (China); Xie Lijin [College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao 266003 (China); Tian Hua [College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao 266003 (China)

2006-08-10T23:59:59.000Z

374

Core-Shell Nanopillar Array Solar Cells using Cadmium Sulfide Coating on Indium Phosphide Nanopillars  

E-Print Network [OSTI]

Monocrystalline silicon solar cells, polycrystalline silicon solar cells, and amorphous silicon (thin-film)

Tu, Bor-An Clayton

2013-01-01T23:59:59.000Z

375

Core-Shell Nanopillar Array Solar Cells using Cadmium Sulfide Coating on Indium Phosphide Nanopillars  

E-Print Network [OSTI]

Monocrystalline silicon solar cells, polycrystalline silicon solar cells, and amorphous silicon (thin-film) solar

Tu, Bor-An Clayton

2013-01-01T23:59:59.000Z

376

Core-Shell Nanopillar Array Solar Cells using Cadmium Sulfide Coating on Indium Phosphide Nanopillars  

E-Print Network [OSTI]

between the maximum output power of the solar cell and theSolar power systems are modular and are readily scalable and versatile. Depending on required output,output power is maximized. The red curve is the I-V of a solar

Tu, Bor-An Clayton

2013-01-01T23:59:59.000Z

377

In situ generation of indium catalysts to grow crystalline silicon nanowires at low temperature on ITO  

E-Print Network [OSTI]

of a precursor gas (e.g., SiH4) at the surface of metallic catalyst droplets, the diffusion of constituent atoms (e.g., Si) in the droplets, and their precipitation at an interface. Fast diffusion is required. It is entirely run under vacuum in one single capacitively coupled, radio-frequency (RF) PECVD reactor. The base

Paris-Sud XI, Université de

378

Core-Shell Nanopillar Array Solar Cells using Cadmium Sulfide Coating on Indium Phosphide Nanopillars  

E-Print Network [OSTI]

Yang, “Solution-processed core-shell nanowires for efficientYong, “Fabrication of ZnO/CdS core/shell nanowire arrays fornew fabrication method for core-shell nanopillar array solar

Tu, Bor-An Clayton

2013-01-01T23:59:59.000Z

379

The role of correlation entropy in nuclear fusion in liquid lithium, indium and mercury  

E-Print Network [OSTI]

Nuclear fusion cross-sections considerably higher than corresponding theoretical predictions are observed in low-energy experiments with metal matrix targets and accelerated deuteron beams. The cross-section increment is significantly higher for liquid than for solid targets. We propose that the same two-body correlation entropy used in evaluating the metal melting entropy explains the large liquid-solid difference of the effective screening potential that parameterizes the cross-section increment. This approach is applied to the specific case of the $^6$Li(d,$\\alpha$)$^4$He reaction, whose measured screening potential liquid-solid difference is $(235 \\pm 63)$ eV. Cross sections in the two metals with the highest two-body correlation entropy (In and Hg) have not yet been measured: increments of the cross sections in liquid relative to the ones in solid metals are estimated with the same procedure.

Coraddu, M; Quarati, P; Scarfone, A M

2015-01-01T23:59:59.000Z

380

Vacancies Ordered in Screw Form (VOSF) and Layered Indium Selenide Thin  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II Field EmissionFunctionalPortalV1 -3Film Deposition by

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Highly efficient blue organic light emitting devices with indium-free  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinement plasmas in theinPlasticsreduction . | EMSL

382

2008 Indium Phosphide and Related Materials Conference, May, Versailles, France Technology Development & Design  

E-Print Network [OSTI]

University of California San Diego #12;Specific Acknowledgements ( Device Team ) Uttam SingisettiDr. MarkGaAs growth on SiGa s g o t o S True MOSFET fabrication processes Designing small FETs which use big (low m off-state current (10 nA/m) for low static dissipationLow off-state current (10 nA/m) for low static

Rodwell, Mark J. W.

383

Core-Shell Nanopillar Array Solar Cells using Cadmium Sulfide Coating on Indium Phosphide Nanopillars  

E-Print Network [OSTI]

renewable energy sources, solar energy is one of the mostthan 0.1% of energy comes from solar. Source: U.S. Energy

Tu, Bor-An Clayton

2013-01-01T23:59:59.000Z

384

The radiation bio-effects of gallum-72 on leukemic cells via a gallium-transferrin complex  

E-Print Network [OSTI]

of the beta is about 30'/o to 40'/o of the maximum energy. An anti-neutrino is emitted simultaneously, carrying the remainder of the energy. Values listed for beta energies are the maximum values unless otherwise stated (Cember 1996). Prominent beta...

Forbes, Christen Douglas

2012-06-07T23:59:59.000Z

385

The design, construction, and testing of a nuclear fuel rod thermal simulation system to study gallium/Zircaloy interactions  

E-Print Network [OSTI]

friends for their unending support and patience during this project. Thank you so much! NOMENCLATURE Abbreviations and Acronyms WGPu- weapons grade plutonium DOE- Department of Energy MOX- mixed oxide fuel WG MOX- weapons grade MOX fuel LWR- light... to be employed were immobilization and fissioning the WGPu as mixed oxide (MOX) fuel in commercial power reactors. Both approaches have many advantages and disadvantages and are currently being studied by scientists and engineers all over the world. The use...

Allison, Christopher Curtis

2012-06-07T23:59:59.000Z

386

Comparative band alignment of plasma-enhanced atomic layer deposited high-k dielectrics on gallium nitride  

SciTech Connect (OSTI)

Al{sub 2}O{sub 3} films, HfO{sub 2} films, and HfO{sub 2}/Al{sub 2}O{sub 3} stacked structures were deposited on n-type, Ga-face, GaN wafers using plasma-enhanced atomic layer deposition (PEALD). The wafers were first treated with a wet-chemical clean to remove organics and an in-situ combined H{sub 2}/N{sub 2} plasma at 650 Degree-Sign C to remove residual carbon contamination, resulting in a clean, oxygen-terminated surface. This cleaning process produced slightly upward band bending of 0.1 eV. Additional 650 Degree-Sign C annealing after plasma cleaning increased the upward band bending by 0.2 eV. After the initial clean, high-k oxide films were deposited using oxygen PEALD at 140 Degree-Sign C. The valence band and conduction band offsets (VBOs and CBOs) of the Al{sub 2}O{sub 3}/GaN and HfO{sub 2}/GaN structures were deduced from in-situ x-ray and ultraviolet photoemission spectroscopy (XPS and UPS). The valence band offsets were determined to be 1.8 and 1.4 eV, while the deduced conduction band offsets were 1.3 and 1.0 eV, respectively. These values are compared with the theoretical calculations based on the electron affinity model and charge neutrality level model. Moreover, subsequent annealing had little effect on these offsets; however, the GaN band bending did change depending on the annealing and processing. An Al{sub 2}O{sub 3} layer was investigated as an interfacial passivation layer (IPL), which, as results suggest, may lead to improved stability, performance, and reliability of HfO{sub 2}/IPL/GaN structures. The VBOs were {approx}0.1 and 1.3 eV, while the deduced CBOs were 0.6 and 1.1 eV for HfO{sub 2} with respect to Al{sub 2}O{sub 3} and GaN, respectively.

Yang Jialing; Eller, Brianna S.; Zhu Chiyu; England, Chris; Nemanich, Robert J. [Department of Physics, Arizona State University, Tempe, Arizona 85287-1504 (United States)

2012-09-01T23:59:59.000Z

387

Organometallic vapor-phase homoepitaxy of gallium arsenide assisted by a downstream hydrogen afterglow plasma in the growth region  

E-Print Network [OSTI]

of the trimeth- ylgallium (TMGa) for homoepitaxial GaAs. They found in direct comparison of the pure thermal-insulating) substrate is loaded into the depo- sition reactor of Fig. 1 without any chemical degreasing or polishing

Collins, George J.

388

Silicon-germanium/gallium phosphide material in high power density thermoelectric modules. Final report, February 1980--September 1981  

SciTech Connect (OSTI)

This is the final report of work on the characterization of an improved Si-Ge alloy and the fabrication of thermoelectric devices. The improved Si-Ge alloy uses a small addition of GaP in n- and p- type 80 at.% Si-20 at.% Ge; this addition reduces the thermal conductivity, thereby increasing its figure of merit and conversion efficiency. The thermoelectric devices fabricated include multicouples intended for use in Radioisotope Thermoelectric Generators (RTGs) and ring-type modules intended for use with nuclear reactor heat sources. This report summarizes the effort in the material as well as the device areas and discusses individual phases of each area. Results should form basis for further effort.

Not Available

1981-12-31T23:59:59.000Z

389

Journal of Engineering Physics and Thermophysics, VoL 71, No..5, 1998 SIMULATION OF A GALLIUM ARSENIDE RUNNING  

E-Print Network [OSTI]

a single monolithic circuit are the main tendencies in the development of superhigh-frequency solid-GaAs-type semiconductors with transport of electrons between valleys [3 ] along with works in the field of creating HHT this constitutes the subject matter of this work. Model and Basic Relations. As was shown in a number of our works

Harilal, S. S.

390

DESIGN AND ANALYSIS OF AN INTEGRATED PULSE MODULATED S-BAND POWER AMPLIFIER IN GALLIUM NITRIDE PROCESS  

SciTech Connect (OSTI)

The design of power amplifiers in any semi-conductor process is not a trivia exercise and it is often encountered that the simulated solution is qualitatively different than the results obtained. Phenomena such as oscillation occurring either in-band or out of band and sometimes at subharmonic intervals, continuous spectrum noticed in some frequency bands, often referred to as chaos, and jumps and hysteresis effects can all be encountered and render a design useless. All of these problems might have been identified through a more rigorous approach to stability analysis. Designing for stability is probably the one area of amplifier design that receives the least amount of attention but incurs the most catastrophic of effects if it is not performed properly. Other parameters such as gain, power output, frequency response and even matching may suitable mitigation paths. But the lack of stability in an amplifier has no mitigating path. In addition to of loss of the design completely there are the increased production cycle costs, costs involved with investigating and resolving the problem and the costs involved with schedule slips or delays resulting from it. The Linville or Rollett stability criteria that many microwave engineers follow and rely exclusively on is not sufficient by itself to ensure a stable and robust design. It will be shown that the universal belief that unconditional stability is obtained through an analysis of the scattering matrix S to determine if 1 and |{Delta}{sub S}| < 1 is only part of the procedure and other tools must be used to validate the criteria. The research shown contributes to the state of the art by developing a more thorough stability design technique for designing amplifiers of any class, whether that be current mode or switch mode, than is currently undertaken with the goal of obtaining first pass design success.

STEVE SEDLOCK

2012-04-04T23:59:59.000Z

391

Förster Resonance Energy Transfer Mediated White-Light-Emitting Rhodamine Fluorophore Derivatives-Gamma Phase Gallium Oxide Nanostructures.  

E-Print Network [OSTI]

??The global lighting source energy consumption accounts for about 22% of the total electricity generated. New high-efficiency solid-state light sources are needed to reduce the… (more)

Chiu, Wan Hang Melanie

2012-01-01T23:59:59.000Z

392

An experimental study of the solubility of Gallium(III) oxide in HCl-bearing water vapour  

E-Print Network [OSTI]

at 200 °C at a pH of $4. The values are very similar to those estimated from data for geothermal wells

Devernal, Anne

393

GALLIUM NITRIDE INTEGRATED GAS/TEMPERATURE SENSORS FOR FUEL CELL SYSTEM MONITORING FOR HYDROGEN AND CARBON MONOXIDE  

E-Print Network [OSTI]

on field effect devices using catalytic metal gates on silicon carbide substrates has been reviewed (Spetz-10%) of transition metals such as copper, silver, and chromium (Feinstein et al 1997 and Pyke 1993). High temperature. Introduction Gas sensing and analysis based on gas adsorption on a catalytic metal surface has been extensively

394

Bismuth in gallium arsenide: Structural and electronic properties of GaAs{sub 1-x}Bi{sub x} alloys  

SciTech Connect (OSTI)

The structural and electronic properties of cubic GaAs{sub 1-x}Bi{sub x} alloys with bismuth concentration 0.0, 0.25, 0.50, 0.75 and 1.0 are studied using the 'special quasi-random structures' (SQS) approach of Zunger along with the generalized gradient approximation (GGA) and the Engel-Vosko generalized gradient approximation (EV-GGA). The lattice constant, bulk modulus, derivative of bulk modulus and energy gap vary with bismuth concentration nonlinearly. The present calculations show that the band gap decreases substantially with increasing bismuth concentration and that spin-orbit coupling influences the nature of bonding at high Bi concentrations. - Graphical abstract: Bowing effect of spin-orbit split-off band values versus Bi content with and without spin-orbit coupling for GaAs{sub 1-x}Bi{sub x} (at x=0.25, 0.50 and 0.75). Calculations are done with GGA. Highlights: Black-Right-Pointing-Pointer Structural and electronic properties of GaAs{sub 1-x}Bi{sub x} alloys were studied. Black-Right-Pointing-Pointer We present results of lattice constant, energy gap, bulk modulus and derivative. Black-Right-Pointing-Pointer The band gap decreases substantially with increasing Bi concentration. Black-Right-Pointing-Pointer Calculations of the density of states and charge densities are also presented. Black-Right-Pointing-Pointer We have performed calculations without and with spin-orbit coupling.

Reshak, Ali Hussain, E-mail: maalidph@yahoo.co.uk [School of Complex Systems, FFWP-South Bohemia University, Nove Hrady 37333 (Czech Republic); School of Material Engineering, Malaysia University of Perlis, P.O Box 77, d/a Pejabat Pos Besar, 01007 Kangar, Perlis (Malaysia); Kamarudin, H. [School of Material Engineering, Malaysia University of Perlis, P.O Box 77, d/a Pejabat Pos Besar, 01007 Kangar, Perlis (Malaysia); Auluck, S. [National Physical Laboratory Dr. KS Krishnan Marg, New Delhi 110012 (India); Kityk, I.V. [Electrical Engineering Department, Technological University of Czestochowa, Al. Armii Krajowej 17/19, Czestochowa (Poland)

2012-02-15T23:59:59.000Z

395

Physics based analytical modelling of Gallium Nitride(GaN) MESFET considering different ion implantation energy with high temperature annealing.  

E-Print Network [OSTI]

??A physics based analytical model of ion implanted GaN MESFET has been presented considering high temperature annealing effects. Choosing appropriate activation energy of impurity atoms,… (more)

Raghavan, Vinay

2015-01-01T23:59:59.000Z

396

Accelerated Testing of HT-9 with Zirconia Coatings Containing...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of HT-9 with Zirconia Coatings Containing Gallium using Raman Spectroscopy and XPS. Accelerated Testing of HT-9 with Zirconia Coatings Containing Gallium using Raman Spectroscopy...

397

Structure, Morphology, and Optical Properties of Amorphous and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Morphology, and Optical Properties of Amorphous and Nanocrystalline Gallium Oxide Thin Films. Structure, Morphology, and Optical Properties of Amorphous and Nanocrystalline Gallium...

398

2010 Minerals Yearbook U.S. Department of the Interior  

E-Print Network [OSTI]

portion of global secondary indium was produced from indium-tin oxide (ITO) recycling. Spent ITO target in an acid solution to dissolve the ITO from which the indium is recovered. Indium recovery from tailings be difficult to process. However, improvements to the process technology have made indium recovery from

399

EXPLORATION AND DEVELOPMENT OF INDIUM-MEDIATED REACTIONS: SYNTHESIS OF DICHLOROINDIUM HYDRIDE, BORANE, AND THEIR APPLICATION TO VARIOUS REDUCTIONS  

E-Print Network [OSTI]

in the use of amine boranes as hydrogen storage materials. 1under investigation for their hydrogen storage capabilities

Saavedra, Jaime Zendejas

2012-01-01T23:59:59.000Z

400

Chromium-Catalyzed Homoaldol Equivalent Reaction, Indium-Mediated Cycloisomerization, and Palladium-Catalyzed Cross-Coupling Reaction  

E-Print Network [OSTI]

.2. Stoichiometric Homoaldol Equivalent Reaction Me O Me BrMg O O Et2O, rt 74% 1 2 3 n=2 p-MeC6H4 HO Me O O+ TiCl4 (1 equiv) TiCl3 O OEt p-NO2C6H4 CO2Et OH 88% 4 5 6 7 EtO OTMS CHOO2N CH2Cl2, ?78 ?C to 0 ?C SiMe3 OSiEt3 TiCl4 (1.1 equiv... to aldehyde 17a, activated by a co-catalyst of trimethylsilyl triflate 21 forming intermediate 22 and affording the homoaldol equivalent adducts 18 in the catalytic cycle (Scheme 1.4). EtO OTMS O Ph 4 18 O O Ti OiPr OTf 17a CO2EtPh OTMS19...

Kang, Jun

2011-10-21T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Electra-optic and all-optical phase modulator on an indium tin oxide single-mode waveguide  

E-Print Network [OSTI]

. Chen and D. Robinson Physica! Optics Corporation, 2.545 West 237th Street, Suite B, Torrance of 15% using 250 mW 355 nm UV light as the activation sources. An 1nzOs:Sn waveguide device workingO, films are widely used in solar energy conversion, in optoelectronics, and in other branches

Chen, Ray

402

Nanoscale Electrical Conductivity and Surface Spectroscopic Studies of Indium-Tin Oxide Yish-Hann Liau and Norbert F. Scherer*  

E-Print Network [OSTI]

enabled the Electronic and optoelectronic devices impact many areas of society, from simple household and optoelectronic devices OCTOBER 2006 | VOLUME 9 | NUMBER 1018 #12;creation of a host of structures with modulated

Scherer, Norbert F.

403

Self-organization of a new fluorous porphyrin and C60 films on indium-tin-oxide electrodew  

E-Print Network [OSTI]

­10 The porphyrin­fullerene com- plexes are appealing as materials for solar-energy conversion and energy storage*ad Received (in Cambridge, UK) 22nd April 2008, Accepted 18th July 2008 First published as an Advance Article of C60 make it an excellent p-acceptor molecule.11 Moreover, because of the small reorganization energy

Liu, Gang-yu

404

Conductive indium-tin oxide nanowire and nanotube arrays made by electrochemically assisted deposition in template membranes: switching  

E-Print Network [OSTI]

for charge transport3 and, in photovoltaic systems, more efficient collection of the photogenerated charge consisted of $25­50 nm in size crystalline grains with the cubic crystal structures of In(OH)3 and In2O3

405

CIBS Solar Cell Development Final Scientific/Technical Report  

SciTech Connect (OSTI)

Efforts to fabricate and study a new photovoltaic material, copper indium boron diselenide (CuInxB1-xSe2 or CIBS), were undertaken. Attempts to prepare CIBS using sputtering deposition techniques resulted in segregation of boron from the rest of elements in the material. CIBS nanocrystals were prepared from the reaction of elemental Se with CuCl, InCl3, and boric acid in solution, but the product material quickly decomposed upon heating that was required in attempts to convert the nanocrystals into a thin film. The investigation of the reasons for the lack of CIBS material stability led to new structure-property studies of closely-related photovoltaic systems as well as studies of new solar cell materials and processing methods that could enhance the development of next-generation solar technologies. A detailed compositional study of CuIn1-xAlxSe2 (CIAS, a system closely related to CIBS) revealed a non-linear correlation between crystal lattice size and the Al/(In+Al) ratios with dual-phase formation being observed. A new nanocrystal-to-thin-film processing method was developed for the preparation of CuIn1-xGaxSe2 (CIGS) thin films in which colloidal Se particles are sprayed in contact with CuIn1-xGaxS2 nanoparticles and heated in an argon atmosphere with no other Se source in the system. The process is non-vacuum and does not require toxic gases such as Se vapor or H2Se. Expertise gained from these studies was applied to new research in the preparation of thin-film pyrite FeS2, an attractive earth-abundant candidate material for next-generation photovoltaics. Three methods successfully produced pure pyrite FeS2 films: sulfurization of sputtered Fe films, chemical bath deposition, and sulfurization of Fe2O3 sol-gel precursors. The last method produced pinhole-free films that may be viable for device development. Nickel, platinum, and possibly carbon would appear to serve as good ohmic contact materials. While CdS has a reasonable conduction band energy match to serve as an n-type buffer material in a pyrite FeS2-based solar cell, the less toxic SnS2 is being explored for this purpose.

Exstrom, Christopher L.; Soukup, Rodney J.; Ianno, Natale J.

2011-09-28T23:59:59.000Z

406

On the Mass Eigenstate Composition of the 8B Neutrinos from the Sun  

E-Print Network [OSTI]

The present data of gallium experiments provide indirectly the only experimental limit on the fraction of $\

A. Kopylov; V. Petukhov

2006-08-14T23:59:59.000Z

407

Method for the chemical separation of GE-68 from its daughter Ga-68  

DOE Patents [OSTI]

The present invention is directed to a generator apparatus for separating a daughter gallium-68 radioisotope substantially free of impurities from a parent gernanium-68 radioisotope, including a first resin-containing column containing parent gernanium-68 radioisotope and daughter gallium-68 radioisotope, a source of first eluent connected to said first resin-containing column for separating daughter gallium-68 radioisotope from the first resin-containing column, said first eluent including citrate whereby the separated gallium is in the form of gallium citrate, a mixing space connected to said first resin-containing column for admixing a source of hydrochloric acid with said separated gallium citrate whereby gallium citrate is converted to gallium tetrachloride, a second resin-containing column for retention of gallium-68 tetrachloride, and, a source of second eluent connected to said second resin-containing column for eluting the daughter gallium-68 radioisotope from said second resin-containing column.

Fitzsimmons, Jonathan M.; Atcher, Robert W.

2010-06-01T23:59:59.000Z

408

Metal/metal oxide doped oxide catalysts having high deNOx selectivity for lean NOx exhaust aftertreatment systems  

DOE Patents [OSTI]

A lean NOx catalyst and method of preparing the same is disclosed. The lean NOx catalyst includes a ceramic substrate, an oxide support material, preferably .gamma.-alumina, deposited on the substrate and a metal promoter or dopant introduced into the oxide support material. The metal promoters or dopants are selected from the group consisting of indium, gallium, tin, silver, germanium, gold, nickel, cobalt, copper, iron, manganese, molybdenum, chromium, cerium, vanadium, oxides thereof, and combinations thereof. The .gamma.-alumina preferably has a pore volume of from about 0.5 to about 2.0 cc/g; a surface area of between about 80 to 350 m.sup.2 /g; an average pore size diameter of between about 3 to 30 nm; and an impurity level of less than or equal to 0.2 weight percent. In a preferred embodiment the .gamma.-alumina is prepared by a sol-gel method, with the metal doping of the .gamma.-alumina preferably accomplished using an incipient wetness impregnation technique.

Park, Paul W.

2004-03-16T23:59:59.000Z

409

Method of preparing doped oxide catalysts for lean NOx exhaust  

DOE Patents [OSTI]

The lean NOx catalyst includes a substrate, an oxide support material, preferably .gamma.-alumina deposited on the substrate and a metal or metal oxide promoter or dopant introduced into the oxide support material. The metal promoters or dopants are selected from the group consisting of indium, gallium, tin, silver, germanium, gold, nickel, cobalt, copper, iron, manganese, molybdenum, chromium cerium, and vanadium, and oxides thereof, and any combinations thereof. The .gamma.-alumina preferably has a pore volume of from about 0.5 to about 2.0 cc/g; a surface area of between 80 and 350 m.sup.2 /g; an average pore size diameter of between about 3 to 30 nm; and an impurity level of less than or equal to about 0.2 weight percent. In a preferred embodiment the .gamma.-alumina is prepared by a sol-gel method, with the metal doping of the .gamma.-alumina preferably accomplished using an incipient wetness impregnation technique.

Park, Paul W.

2004-03-09T23:59:59.000Z

410

In–Ga–Zn–O thin film transistor with HfO{sub 2} gate insulator prepared using various O{sub 2}/(Ar + O{sub 2}) gas ratios  

SciTech Connect (OSTI)

We have investigated the effect of the deposition of an HfO{sub 2} thin film as a gate insulator with different O{sub 2}/(Ar + O{sub 2}) gas ratios using RF magnetron sputtering. The HfO{sub 2} thin film affected the device performance of amorphous indium–gallium–zinc oxide transistors. The performance of the fabricated transistors improved monotonously with increasing O{sub 2}/(Ar + O{sub 2}) gas ratio: at a ratio of 0.35, the field effect mobility of the amorphous InGaZnO thin film transistors was improved to 7.54 cm{sup 2}/(V s). Compared to those prepared with an O{sub 2}/(Ar + O{sub 2}) gas ratio of 0.05, the field effect mobility of the amorphous InGaZnO thin film transistors was increased to 1.64 cm{sup 2}/(V s) at a ratio of 0.35. This enhancement in the field effect mobility was attributed to the reduction of the root mean square roughness of the gate insulator layer, which might result from the trap states and surface scattering of the gate insulator layer at the lower O{sub 2}/(Ar + O{sub 2}) gas ratio.

Jo, Young Je [WCU Department of Printed Electronics, Sunchon National University, Chonnam 540-742 (Korea, Republic of)] [WCU Department of Printed Electronics, Sunchon National University, Chonnam 540-742 (Korea, Republic of); Lee, In-Hwan [School of Advanced Materials Engineering, Chonbuk National University, Chonju 561-756 (Korea, Republic of)] [School of Advanced Materials Engineering, Chonbuk National University, Chonju 561-756 (Korea, Republic of); Kwak, Joon Seop, E-mail: jskwak@sunchon.ac.kr [WCU Department of Printed Electronics, Sunchon National University, Chonnam 540-742 (Korea, Republic of)

2012-10-15T23:59:59.000Z

411

The contact heat conductance at diamond-OFHC copper interface with GaIn eutectic as a heat transfer medium  

SciTech Connect (OSTI)

Results of an experimental study of the contact heat conductance across a single diamond crystal interface with OFHC copper (Cu) are reported. Gallium-indium (GaIn) eutectic was used as an interstitial material. Contact conductance data are important in the design and the prediction of the performance of x-ray diamond monochromators under high-heat-load conditions. Two sets of experiments were carried out. In one, the copper surface in contact with diamond was polished and then electroless plated with 1 {mu}m of nickel, while in the other, the copper contact surface was left as machined. Measured average interface heat conductances are 44.7 {plus_minus}8 W/cm{sup 2}{minus}K for nonplated copper and 23.0 {plus_minus}3 W/cm{sup 2}{minus}K for nickel-plated copper. For reference, the thermal contact conductances at a copper-copper interface (without diamond) were also measured, and the results are reported. A typical diamond monochromator, 0.2 mm thick, will absorb about 44 W under a standard undulator beam at the Advanced Photon Source. The measured conductance for nickel-plated copper suggests that the temperature drop across the interface of diamond and nickel-plated copper, with a 20 mm{sup 2} contact area, will be about 10{degree}C. Therefore temperature rises are rather modest, and the accuracy of the measured contact conductances presented here are sufficient for design purposes.

Assoufid, L.; Khounsary, A.M.

1996-01-01T23:59:59.000Z

412

Contact heat conductance at a diamond-OFHC copper interface with GaIn eutectic as a heat transfer medium  

SciTech Connect (OSTI)

The results of an experimental study of the contact heat conductance across a single diamond crystal interface with OFHC copper (Cu) are reported. Gallium-indium (GaIn) eutectic was used as an interstitial material. Contact conductance data are important in the design and the prediction of the performance of x-ray optics under high-heat-load conditions. Two sets of experiments were carried out. In one, the copper surface in contact with diamond was polished and then electroless plated with 1 {mu}m of nickel, while in the other, the copper contact surface was left as machined. The measured average interface heat conductances are 44.7{plus_minus}8 W/cm{sup 2}-K for nonplated copper and 23.0{plus_minus}8 W/cm{sup 2}-K for nickel-plated copper. For reference, the thermal contact conductances at a copper-copper interface (without diamond) were also measured, and the results are reported. A typical diamond monochromator, 0.2 mm thick, will absorb about 44 W under a standard undulator beam at the Advanced Photon Source. The measured conductance for nickel-plated copper suggests that the temperature drop across the interface of diamond and nickel-plated copper, with a 20 mm {sup 2}contact area, will be about 10{degree}C. Therefore temperature rises are rather modest, and the accuracy of the measured contact conductances presented here are sufficient for design purposes. {copyright} {ital 1996 American Institute of Physics.}

Assoufid, L.; Khounsary, A. [Experimental Facilities Division, Advanced Photon Source, Argonne National Laboratory, Argonne, Illinois 60439 (United States)] [Experimental Facilities Division, Advanced Photon Source, Argonne National Laboratory, Argonne, Illinois 60439 (United States)

1996-09-01T23:59:59.000Z

413

Controlled ambient and temperature treatment of InGaZnO thin film transistors for improved bias-illumination stress reliability  

SciTech Connect (OSTI)

The failure mechanisms arising from the instability in operation of indium gallium zinc oxide based thin film transistors (TFTs) upon prolonged real application stresses (bias and illumination) have been extensively studied and reported. Positive and negative gate bias conditions, along with high photonic energy wavelengths within visible light spectrum are used as stress conditions. The increased carrier concentration due to photonic excitation of defects within bandgap and ionization of deep level vacancies is compensated by the reduction in off currents under illumination due to the trapping of carriers in the intermetal dielectric. Band lowering at the source-channel junction due to accumulation of negative carriers repelled due to negative gate bias stress further causes high carrier flow into the channel and drives the devices into failure. The defect identification during failure and degradation assisted in proposing suitable low temperature post processing in specific ambients. Reliability tests after specific anneals in oxygen, vacuum, and forming gas ambients confirm the correlation of the defect type with anneal ambient. Annealed TFTs demonstrate high stabilities under illumination stresses and do not fail when subjected to combined stresses that cause failure in as-fabricated TFTs. Oxygen and forming gas anneals are impactful on the reliability and opens an area of study on donor and vacancy behavior in amorphous mixed oxide based TFTs. The subthreshold swing, field-effect mobilities, and off currents provide knowledge on best anneal practices by understanding role of hydrogen and oxygen in vacancy annihilation and transistor switching properties.

Vemuri, Rajitha N. P., E-mail: rvemuri@asu.edu [School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe 85287 (United States); Hasin, Muhammad R. [School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe 85287 (United States); Alford, T. L., E-mail: TA@asu.edu [School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe 85287 and School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe 85287 (United States)

2014-03-15T23:59:59.000Z

414

Production data on 0.55 eV InGaAs thermophotovoltaic cells  

SciTech Connect (OSTI)

Low bandgap 0.55 eV (2.25 {micro}m cutoff wavelength) indium gallium arsenide (In{sub 0.72}Ga{sub 0.28}As) thermophotovoltaic (TPV) cells use much more of the long wavelength energy emitted from low temperature (< 1,200 C) thermal sources than either Si or GaSb cells. Data are presented on a statistically significant number (2,500) of these TPV cells, indicating the performance obtainable in large numbers of cells. This data should be useful in the design and modeling of TPV system performance. At 1.2 A/cm{sup 2} short-circuit current, an average open-circuit voltage of 283 mV is obtained with a 60% fill factor. The peak external quantum efficiency for uncoated cells is 65% and is over 50% from 1.1 to 2.2 {micro}m. Internal quantum efficiency is over 76% in this range assuming an estimated 34% reflectance loss.

Wojtzuk, S.; Colter, P. [Spire Corp., Bedford, MA (United States); Charache, G.; Campbell, B. [Lockheed Martin, Inc., Schenectady, NY (United States)

1996-05-01T23:59:59.000Z

415

Method and system for the combination of non-thermal plasma and metal/metal oxide doped .gamma.-alumina catalysts for diesel engine exhaust aftertreatment system  

DOE Patents [OSTI]

The present disclosure pertains to a system and method for treatment of oxygen rich exhaust and more specifically to a method and system that combines non-thermal plasma with a metal doped .gamma.-alumina catalyst. Current catalyst systems for the treatment of oxygen rich exhaust are capable of achieving only approximately 7 to 12% NO.sub.x reduction as a passive system and only 25 40% reduction when a supplemental hydrocarbon reductant is injected into the exhaust stream. It has been found that treatment of an oxygen rich exhaust initially with a non-thermal plasma and followed by subsequent treatment with a metal doped .gamma.-alumina prepared by the sol gel method is capable of increasing the NO.sub.x reduction to a level of approximately 90% in the absence of SO.sub.2 and 80% in the presence of 20 ppm of SO.sub.2. Especially useful metals have been found to be indium, gallium, and tin.

Aardahl, Christopher L. (Richland, WA); Balmer-Miller, Mari Lou (West Richland, WA); Chanda, Ashok (Peoria, IL); Habeger, Craig F. (West Richland, WA); Koshkarian, Kent A. (Peoria, IL); Park, Paul W. (Peoria, IL)

2006-07-25T23:59:59.000Z

416

Influence of an anomalous dimension effect on thermal instability in amorphous-InGaZnO thin-film transistors  

SciTech Connect (OSTI)

This paper investigates abnormal dimension-dependent thermal instability in amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors. Device dimension should theoretically have no effects on threshold voltage, except for in short channel devices. Unlike short channel drain-induced source barrier lowering effect, threshold voltage increases with increasing drain voltage. Furthermore, for devices with either a relatively large channel width or a short channel length, the output drain current decreases instead of saturating with an increase in drain voltage. Moreover, the wider the channel and the shorter the channel length, the larger the threshold voltage and output on-state current degradation that is observed. Because of the surrounding oxide and other thermal insulating material and the low thermal conductivity of the IGZO layer, the self-heating effect will be pronounced in wider/shorter channel length devices and those with a larger operating drain bias. To further clarify the physical mechanism, fast I{sub D}-V{sub G} and modulated peak/base pulse time I{sub D}-V{sub D} measurements are utilized to demonstrate the self-heating induced anomalous dimension-dependent threshold voltage variation and on-state current degradation.

Liu, Kuan-Hsien; Chou, Wu-Ching, E-mail: tcchang3708@gmail.com, E-mail: wuchingchou@mail.nctu.edu.tw [Department of Electrophysics, National Chiao Tung University, Hsin-chu 300, Taiwan (China); Chang, Ting-Chang, E-mail: tcchang3708@gmail.com, E-mail: wuchingchou@mail.nctu.edu.tw [Department of Physics, National Sun Yat-Sen University, Kaohsiung 804, Taiwan (China); Advanced Optoelectronics Technology Center, National Cheng Kung University, Taiwan (China); Chen, Hua-Mao; Tai, Ya-Hsiang [Department of Photonics and Institute of Electro-Optical Engineering, National Chiao Tung University, Hsin-chu 300, Taiwan (China); Tsai, Ming-Yen; Hung, Pei-Hua; Chu, Ann-Kuo [Department of Photonics, National Sun Yat-Sen University, Kaohsiung 804, Taiwan (China); Wu, Ming-Siou; Hung, Yi-Syuan [Department of Electronics Engineering, National Chiao Tung University, Hsin-Chu 300, Taiwan (China); Hsieh, Tien-Yu [Department of Physics, National Sun Yat-Sen University, Kaohsiung 804, Taiwan (China); Yeh, Bo-Liang [Advanced Display Technology Research Center, AU Optronics, No.1, Li-Hsin Rd. 2, Hsinchu Science Park, Hsin-Chu 30078, Taiwan (China)

2014-10-21T23:59:59.000Z

417

Synthesis and optical properties of cadmium selenide quantum dots for white light-emitting diode application  

SciTech Connect (OSTI)

Highlights: ? Stable CdSe QDs were synthesized by the one-step and two-level process respectively. ? The fabricated white LEDs show good white balance. ? CdSe QDs present well green to yellow band luminescence. ? CdSe QDs displayed a broad excitation band. - Abstract: Yellow light-emitting cadmium selenide quantum dots were synthesized using one-step and two-step methods in an aqueous medium. The structural luminescent properties of these quantum dots were investigated. The obtained cadmium selenide quantum dots displayed a broad excitation band suitable for blue or near-ultraviolet light-emitting diode applications. White light-emitting diodes were fabricated by coating the cadmium selenide samples onto a 460 nm-emitting indium gallium nitrite chip. Both samples exhibited good white balance. Under a 20 mA working current, the white light-emitting diode fabricated via the one-step and two-step methods showed Commission Internationale de l’Éclairage coordinates at (0.27, 0.23) and (0.27, 0.33), respectively, and a color rendering index equal to 41 and 37, respectively. The one-step approach was simpler, greener, and more effective than the two-step approach. The one-step approach can be enhanced by combining cadmium selenide quantum dots with proper phosphors.

Xu, Xianmei; Wang, Yilin; Gule, Teri; Luo, Qiang [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 53000 (China); Zhou, Liya, E-mail: zhouliyatf@163.com [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 53000 (China); Gong, Fuzhong [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 53000 (China)

2013-03-15T23:59:59.000Z

418

Monolithically integrated Helmholtz coils by 3-dimensional printing  

SciTech Connect (OSTI)

3D printing technology is of great interest for the monolithic fabrication of integrated systems; however, it is a challenge to introduce metallic components into 3D printed molds to enable broader device functionality. Here, we develop a technique for constructing a multi-axial Helmholtz coil by injecting a eutectic liquid metal Gallium Indium alloy (EGaIn) into helically shaped orthogonal cavities constructed in a 3D printed block. The tri-axial solenoids each carry up to 3.6?A of electrical current and produce magnetic field up to 70?G. Within the central section of the coil, the field variation is less than 1% and is in agreement with theory. The flow rates and critical pressures required to fill the 3D cavities with liquid metal also agree with theoretical predictions and provide scaling trends for filling the 3D printed parts. These monolithically integrated solenoids may find future applications in electronic cell culture platforms, atomic traps, and miniaturized chemical analysis systems based on nuclear magnetic resonance.

Li, Longguang [Department of Electrical Engineering, University of Michigan–Shanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Abedini-Nassab, Roozbeh; Yellen, Benjamin B., E-mail: yellen@duke.edu [Department of Electrical Engineering, University of Michigan–Shanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Department of Mechanical Engineering and Materials Science, Duke University, P.O. Box 90300, Hudson Hall, Durham, North Carolina 27708 (United States)

2014-06-23T23:59:59.000Z

419

Preparation of silicon substrates for gallium-arsenide solar cells by electron-beam-pulse processing. Annual technical report, March 15, 1980-March 15, 1981  

SciTech Connect (OSTI)

In the past year a process has been developed for creating high-quality epitaxial layers of germanium on silicon substrates using rapid heating and cooling with a pulsed electron beam. This single-crystal germanium coating is the key to the production of high efficiency GaAs solar cells on low-cost silicon substrates in an economical manner. Thin (less than or equal to 1 ..mu..m) layers of Ge have been deposited on Si wafers by chemical vapor deposition (CVD) in single-crystal form or by vacuum evaporation in amorphous or polycrystalline form. The CVD films have given the best results, with good crystallinity and electrical properties as deposited. A persistent problem with surface roughness in the as-deposited films has been overcome by pulsed electron beam melting of the near-surface region in time periods on the order of a microsecond. The brief molten period smooths the surface features without compromising the crystallinity, electrical properties, or interfacial abruptness of the Ge film. These layers are of a quality suitable for further evaluation by GaAs growth and cell processing in the next phase of the program. Pulsed electron beam processing also serves a vital function for the evaporated Ge films, which are melted by the beam and recrystallized on the Si substrates, epitaxial single crystal Ge layers result from amorphous or polycrystalline starting films. To date results have not been as satisfactory as for CVD films; contamination from several sources has been identified as a problem. Many of these sources have been eliminated, so that a decision on the intrinsic limitations of the evaporated film approach should be made in the near future.

Tobin, S.P.

1981-05-01T23:59:59.000Z

420

Formation of Porous Layers by Electrochemical Etching of Germanium and Gallium Arsenide for Cleave Engineered Layer Transfer (CELT) Application in High Efficiency Multi-Junction Solar Cells  

E-Print Network [OSTI]

film photovoltaics [1]. This roughly doubling of efficiencyMJ photovoltaics. MJ solar cells achieve higher efficiencies

Fong, David Michael

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Narrow energy band gap gallium arsenide nitride semi-conductors and an ion-cut-synthesis method for producing the same  

DOE Patents [OSTI]

A method for forming a semi-conductor material is provided that comprises forming a donor substrate constructed of GaAs, providing a receiver substrate, implanting nitrogen into the donor substrate to form an implanted layer comprising GaAs and nitrogen. The implanted layer is bonded to the receiver substrate and annealed to form GaAsN and nitrogen micro-blisters in the implanted layer. The micro-blisters allow the implanted layer to be cleaved from the donor substrate.

Weng, Xiaojun; Goldman, Rachel S.

2006-06-06T23:59:59.000Z

422

Synthesis of Germanium-Gallium-Tellurium (Ge-Ga-Te) ceramics by ball-milling and sintering Mathieu Hubert, Elena Petracovschi, Xiang-Hua Zhang and Laurent Calvez*  

E-Print Network [OSTI]

, the semiconductor behavior of CdTe is exploited for the production of solar panels [1, 2], the rapid and reversibleSe3 [21, 22] glasses show a controllable crystallization behavior, enabling the production of glass

Paris-Sud XI, Université de

423

PHYSICAL REVIEW A 82, 043806 (2010) Photon self-induced spin-to-orbital conversion in a terbium-gallium-garnet crystal  

E-Print Network [OSTI]

`a di Napoli "Federico II", Complesso Universitario di Monte S. Angelo, 80126 Napoli, Italy 2 INFN Sezione di Napoli, Complesso Universitario di Monte S. Angelo, 80126 Napoli, Italy 3 EGO, European Gravitational Observatory, Via E. Amaldi, 56021 S. Stefano a Macerata, Cascina (PI), Italy 4 CNISM

Marrucci, Lorenzo

424

Formation of Porous Layers by Electrochemical Etching of Germanium and Gallium Arsenide for Cleave Engineered Layer Transfer (CELT) Application in High Efficiency Multi-Junction Solar Cells  

E-Print Network [OSTI]

III! V Multijunction Solar Cells,” (2003). J. F. Geisz, etEfficiency Multi-Junction Solar Cells A thesis submitted inEfficiency Multi-Junction Solar Cells By David Michael Fong

Fong, David Michael

2012-01-01T23:59:59.000Z

425

Gallium arsenide-based ternary compounds and multi-band-gap solar cell research. Annual subcontract report, 15 April 1988--14 June 1990  

SciTech Connect (OSTI)

Aim of this contract is the achievement of a high-efficiency, low-cost solar cell. The basic approach to the problem is centered upon the heteroepitaxial growth of a III-V compound material onto a single-crystal silicon wafer. The growth technique employed is metalorganic chemical vapor deposition. The silicon wafer may serve as a mechanical substrate and ohmic contact for a single-junction device, or may contain a p-n junction of its own and form the bottom cell of a two junction tandem solar cell structure. The III-V material for the single-junction case is GaAs and for the two-junction case is either GaAlAs or GaAsP, either material having the proper composition to yield a band gap of approximately 1.7 eV. Results achieved in this contract include the following: (1) a 17.6% efficient GaAs-on-Si solar cell; (2) an 18.5% efficient GaAs-on-Si concentrator solar cell at 400 suns; (3) a 24.8% efficient GaAs-on-GaAs solar cell; (4) a 28.7% efficient GaAs-on-GaAs concentrator solar cell at 200 suns; (5) measurement of the effects of dislocation density and emitter doping on GaAs cells; and (6) improvements in the growth process to achieve reproducible thin AlGaAs window layers with low recombination velocities and environmental stability.

Vernon, S. [Spire Corp., Bedford, MA (United States)

1993-02-01T23:59:59.000Z

426

Gallium arsenide-based ternary compounds and multi-band-gap solar cell research. Final subcontract report, 1 April 1988--31 March 1990  

SciTech Connect (OSTI)

This report describes work to achieve a high-efficiency, low-cost solar cell. The basic approach to the problem is centered upon the heteroepitaxial growth of a III-V compound material onto a single-crystal silicon wafer. The growth technique employed throughout this work is metal-organic chemical vapor deposition. The silicon wafer may serve as a mechanical substrate and ohmic contact for a single-junction device, or it may contain a p-n junction of its own and form the bottom cell of a two-junction tandem solar cell structure. The III-V material for the single-junction case is GaAs, and for the two-junction case it is either GaAlAs or GaAsP, either material having the proper composition to yield a band gap of approximately 1.7 eV. Results achieved in this contract include (1) a 17.6%-efficient GaAs-on-Si solar cell; (2) an 18.5%-efficient GaAs-on-Si concentrator solar cell at 400 suns; (3) a 24.8%-efficient GaAs-on-GaAs solar cell; (4) a 28.7%-efficient GaAs-on-GaAs concentrator solar cell at 200 suns; (5) the measurement of the effects of dislocation density and emitter doping on GaAs cells; and (6) improvements in the growth process to achieve reproducible thin AlGaAs window layers with low recombination velocities and environmental stability.

Vernon, S. [Spire Corp., Bedford, MA (United States)

1993-07-01T23:59:59.000Z

427

Inversion by metalorganic chemical vapor deposition from N- to Ga-polar gallium nitride and its application to multiple quantum well light-emitting diodes  

SciTech Connect (OSTI)

We demonstrate a metalorganic chemical vapor deposition growth approach for inverting N-polar to Ga-polar GaN by using a thin inversion layer grown with high Mg flux. The introduction of this inversion layer allowed us to grow p-GaN films on N-polar GaN thin film. We have studied the dependence of hole concentration, surface morphology, and degree of polarity inversion for the inverted Ga-polar surface on the thickness of the inversion layer. We then use this approach to grow a light emitting diode structure which has the MQW active region grown on the advantageous N-polar surface and the p-layer grown on the inverted Ga-polar surface.

Hosalli, A. M.; Van Den Broeck, D. M.; Bedair, S. M. [Department of Electrical and Computer Engineering, NCSU, Raleigh, North Carolina 27695 (United States)] [Department of Electrical and Computer Engineering, NCSU, Raleigh, North Carolina 27695 (United States); Bharrat, D.; El-Masry, N. A. [Department of Material Science and Engineering, NCSU, Raleigh, North Carolina 27695 (United States)] [Department of Material Science and Engineering, NCSU, Raleigh, North Carolina 27695 (United States)

2013-12-02T23:59:59.000Z

428

Phonon and thermal properties of exfoliated TaSe2 thin films T. R. Pope,2  

E-Print Network [OSTI]

Phonon and thermal properties of exfoliated TaSe2 thin films Z. Yan,1 C. Jiang,1 T. R. Pope,2 C. F diselenide (2H-TaSe2) obtained via the "graphene-like" mechanical exfoliation of crystals grown by chemical films exfoliated from TaSe2 and other metal dichalcogenides, as well as for evaluating self

429

2009 Minerals Yearbook U.S. Department of the Interior  

E-Print Network [OSTI]

As and gallium nitride (GaN) and was used in integrated circuits (ICs) and optoelectronic devices [laser diodes

430

2011 Minerals Yearbook U.S. Department of the Interior  

E-Print Network [OSTI]

Cs) and optoelectronic devices [laser diodes, light-emitting diodes (lEDs), photodetectors, and solar cells]. Gallium

431

atom. The indium lies almost at the center of gravity of the ring spanned by the five manganese atoms (distance 8.5 pm;  

E-Print Network [OSTI]

) in the absence ofmoisture and air. All glass apparatus was evacuated Several times on an oil v'xuiim line and flushed with argon before use. The solvents were dried under argon and freshly distilled. 1: Prepared-63 F,eluent THFjmethanol l0jl). Ayellow and a blue fraction that have not yet been able

Silverman, Scott K.

432

(Data in metric tons, unless otherwise noted) Domestic Production and Use: Indium was not recovered from ores in the United States in 2000. Domestically  

E-Print Network [OSTI]

Statistics--United States: 1996 1997 1998 1999 2000e Production, refinery -- -- -- -- -- Imports fluctuations. World Refinery Production, Reserves, and Reserve Base: Refinery productione Reserves2 Reserve

433

(Data in metric tons, unless otherwise noted) Domestic Production and Use: Indium was not recovered from ores in the United States in 2002. Domestically  

E-Print Network [OSTI]

Statistics--United States: 1998 1999 2000 2001 2002e Production, refinery -- -- -- -- -- Imports. World Refinery Production, Reserves, and Reserve Base: Refinery productione Reserves3 Reserve base3 2001

434

(Data in metric tons, unless otherwise noted) Domestic Production and Use: Indium was not recovered from ores in the United States in 2001. Domestically  

E-Print Network [OSTI]

--United States: 1997 1998 1999 2000 2001e Production, refinery -- -- -- -- -- Imports for consumption 85.5 75 77 fluctuations caused by economic uncertainties. World Refinery Production, Reserves, and Reserve Base: Refinery

435

Microstructural development and mechanical behavior of eutectic bismuth-tin and eutectic indium-tin in response to high temperature deformation  

SciTech Connect (OSTI)

The mechanical behavior and microstructure of eutectic Bi-Sn and In-Sn solders were studied in parallel in order to better understand high temperature deformation of these alloys. Bi-Sn solder joints were made with Cu substrates, and In-Sn joints were made with either Cu or Ni substrates. The as-cast microstructure of Bi-Sn is complex regular, with the two eutectic phases interconnected in complicated patterns. The as-cast microstructure of In-Sn depends on the substrate. In-Sn on Cu has a non-uniform microstructure caused by diffusion of Cu into the solder during sample preparation, with regions of the Sn-rich {gamma} phase imbedded in a matrix of the In-rich {beta} phase. The microstructure of In-Sn on Ni is uniform and lamellar and the two phases are strongly coupled. The solders deform non-uniformly, with deformation concentrating in a band along the length of the sample for Bi-Sn and In-Sn on Cu, though the deformation is more diffuse in In-Sn than in Bi-Sn. Deformation of In-Sn on Ni spreads throughout the width of the joint. The different deformation patterns affect the shape of the stress-strain curves. Stress-strain curves for Bi-Sn and In-Sn on Cu exhibit sharp decays in the engineering stress after reaching a peak. Most of this stress decay is removed for In-Sn on Ni. The creep behavior of In-Sn also depends on the substrate, with the creep deformation controlled by the soft P phase of the eutectic for In-Sn on Cu and controlled by the harder {gamma} phase for In-Sn on Ni. When In-Sn on Ni samples are aged, the microstructure coarsens and changes to an array of {gamma} phase regions in a matrix of the {beta} phase, and the creep behavior changes to resemble that of In-Sn on Cu. The creep behavior of Bi-Sn changes with temperature. Two independent mechanisms operate at lower temperatures, but there is still some question as to whether one or both of these, or a third mechanism, operates at higher temperatures.

Goldstein, J.L.F. [Univ. of California, Berkeley, CA (United States). Dept. of Materials Science and Mineral Engineering; [Lawrence Berkeley Lab., CA (United States)

1993-11-01T23:59:59.000Z

436

Growth and morphology of 0.80 eV photoemitting indium nitride nanowires M. C. Johnson, C. J. Lee, and E. D. Bourret-Courchesnea)  

E-Print Network [OSTI]

Preparation of Optoelectronic Devices Based on AlN/AlGaN Superlattices M. Holtz,a,b G. Kipshidze) optoelectronic devices. Superlattices with extremely short periods have been studied. The AlN "barrier" layers interest in making optoelectronic devices operating in the ultraviolet (UV). Light emitting diodes (LEDs

Zettl, Alex

437

D794 Journal of The Electrochemical Society, 161 (14) D794-D800 (2014) Electrodeposition of High-Purity Indium Thin Films and Its  

E-Print Network [OSTI]

D794 Journal of The Electrochemical Society, 161 (14) D794-D800 (2014) Electrodeposition of High, the electrodeposited In films are phosphorized via the thin-film vapor-liquid-solid growth method. The resulting poly of fully reduced phosphorus from aqueous solution is very difficult without a catalyst, such as nickel,2

Javey, Ali

2014-01-01T23:59:59.000Z

438

Atomic Layer Deposition of Indium Tin Oxide Thin Films Using Nonhalogenated Jeffrey W. Elam,*, David A. Baker, Alex B. F. Martinson,, Michael J. Pellin, and  

E-Print Network [OSTI]

precise coatings to be applied on all exposed surfaces of nanoporous substrates such as aerogels10 using ALD techniques to apply metal oxide coatings onto porous supports such as anodic aluminum oxide

439

Final Report  

SciTech Connect (OSTI)

The objective of this DOE SAI project is to demonstrate the feasibility of electrodeposited and solution-doped transparent conducting oxides (TCOs) such as zinc oxide with resistivity in the mid-10{sup -4} {Omega}-cm range. The target application is an 'on-top' TCO which can be deposited on semiconductors in thin-film and future solar cells including amorphous silicon, copper indium gallium selenide and emerging solar cells. There is no solution-prepared on-top TCO currently used in commercial solar cells. This project, if successful, will fill this gap. Our technical objectives include electrodeposited TCOs with (1) resistivity in the mid-10{sup -4} {Omega}-cm range, (2) post-deposition annealing below 300 C and (3) no-vacuum processing or low-vacuum processing. All the three research objectives listed above have been accomplished in the 14-month period from July 1, 2009 through September 30, 2010. The most noticeable accomplishments of this project are (1) identification of a terawatt-scale dopant for zinc oxide, i.e. yttrium, whose known reserve is enough for 60 peak terawatts of thin-film solar cells; (2) demonstration of a record-low resistivity, 6.3 x 10{sup -5} {Omega}-cm, in solution-deposited zinc oxide with an abundant dopant; and (3) the record-low resistivity was accomplished with a maximum process temperature of 300 C and without vacuum annealing. Industrial applications of the new yttrium-doped zinc oxide are being pursued, including (1) green deposition of yttrium-doped zinc oxide to reduce water consumption during deposition and (2) search for an industrial partner to develop an electrochemical tool for large-area uniform deposition of yttrium-doped zinc oxide.

Dr. Meng Tao

2010-12-22T23:59:59.000Z

440

Thermoelectric material including a multiple transition metal-doped type I clathrate crystal structure  

DOE Patents [OSTI]

A thermoelectric material includes a multiple transition metal-doped type I clathrate crystal structure having the formula A.sub.8TM.sub.y.sub.1.sup.1TM.sub.y.sub.2.sup.2 . . . TM.sub.y.sub.n.sup.nM.sub.zX.sub.46-y.sub.1.sub.-y.sub.2.sub.- . . . -y.sub.n.sub.-z. In the formula, A is selected from the group consisting of barium, strontium, and europium; X is selected from the group consisting of silicon, germanium, and tin; M is selected from the group consisting of aluminum, gallium, and indium; TM.sup.1, TM.sup.2, and TM.sup.n are independently selected from the group consisting of 3d, 4d, and 5d transition metals; and y.sub.1, y.sub.2, y.sub.n and Z are actual compositions of TM.sup.1, TM.sup.2, TM.sup.n, and M, respectively. The actual compositions are based upon nominal compositions derived from the following equation: z=8q.sub.A-|.DELTA.q.sub.1|y.sub.1-|.DELTA.q.sub.2|y.sub.2- . . . -|.DELTA.q.sub.n|y.sub.n, wherein q.sub.A is a charge state of A, and wherein .DELTA.q.sub.1, .DELTA.q.sub.2, .DELTA.q.sub.n are, respectively, the nominal charge state of the first, second, and n-th TM.

Yang, Jihui (Lakeshore, CA); Shi, Xun (Troy, MI); Bai, Shengqiang (Shanghai, CN); Zhang, Wenqing (Shanghai, CN); Chen, Lidong (Shanghai, CN); Yang, Jiong (Shanghai, CN)

2012-01-17T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

ccsd00004270, Prototype scintillator cell for an In-based solar  

E-Print Network [OSTI]

indium-loaded scintillator of interest for real-time low energy solar neutrino spectroscopy. First, lightccsd­00004270, version 1 ­ 16 Feb 2005 Prototype scintillator cell for an In-based solar neutrino stable over a period of > 1 y. Key words: Solar neutrinos, Indium experiment, Indium loaded scintillator

442

2009 Minerals Yearbook U.S. Department of the Interior  

E-Print Network [OSTI]

secondary indium was produced from ITO recycling. Sputtering, the process in which ITO is deposited. It was reported that the ITO recycling process--from collection of scrap to production of secondary materials to dissolve the ITO from which the indium is recovered. Indium recovery from tailings was thought to have been

443

Sensitivity of absorption spectra to surface segregation in InGaN/GaN quantum well structures  

SciTech Connect (OSTI)

We investigate the influence of the indium surface segregation on absorption spectra in InGaN/GaN quantum well structures having different indium amount. Results of the mathematical modeling show that such influence is more pronounced in quantum well structures with high indium amounts. The origin of this effect is related to the interplay between the indium surface segregation and internal electrostatic fields. Our theoretical analysis is performed using semiconductor Bloch equations within the Hartree-Fock approximation including into consideration excitonic effects. Results of the global sensitivity analysis evidence that the influence of the indium surface segregation is less than one order of magnitude in comparison with the impact of the quantum-well width and indium molar fraction. Also, the influence of the indium surface segregation is not the same for each interface of the quantum well.

Klymenko, M. V.; Shulika, O. V. [Lab. Photonics, Kharkov National University of Radio Electronics, Kharkov, 61166 (Ukraine); Sukhoivanov, I. A. [Department of Electronics, Engineering Division, University of Guanajuato, Salamanca, Guanajuato, 36885 (Mexico)

2014-05-15T23:59:59.000Z

444

In situ chemical sensing in AlGaN/GaN high electron mobility transistor metalorganic chemical vapor deposition process for real-time  

E-Print Network [OSTI]

; accepted 14 June 2005; published 18 July 2005 Gallium nitride and its alloys promise to be key materials.1116/1.1993616 I. INTRODUCTION In recent years, gallium-nitride GaN - and aluminum- gallium-nitride AlGaN -based are grown at high temperatures e.g., up to 1100 °C using large concentrations of H2 carrier and NH3 N source

Rubloff, Gary W.

445

E-Print Network 3.0 - arsenide oxides sr2cro3feas Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Microstructures of gallium nitride nanowires synthesized by oxide-assisted method W.S. Shi, Y... synthesized using the recently developed oxide-assisted method by laser...

446

Photonic crystal light emitting diode.  

E-Print Network [OSTI]

?? This master's thesis describe electromagnetic simulations of a gallium antimonide (GaSb) light emitting diode, LED. A problem for such devices is that most of… (more)

Leirset, Erlend

2010-01-01T23:59:59.000Z

447

E-Print Network 3.0 - americium arsenides Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: of gallium arsenide, a semiconductor, which is used in advanced optoelectronics, lasers, microwave circuits... , and solar cells. To determine material...

448

E-Print Network 3.0 - adaptive nitride-based coatings Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DELAUSANNE Summary: AND ELECTRONICS PROF. N. GRANDJEAN 33 III-NITRIDE BASED OPTOELECTRONIC DEVICES 34 GALLIUM NITRIDE-BASED 2D... FOR DIVERSE APPLICATIONS 84 HOLE ARRAY...

449

2012 Solid-State Lighting Manufacturing R&D Workshop Presentations...  

Broader source: Energy.gov (indexed) [DOE]

Frank Cerio, Veeco Instruments Advanced Epi Tools for Gallium Nitride Light Emitting Diode Devices Vivek Agrawal, Applied Materials Driving Down HB-LED Costs:...

450

The role of screening of the electron-phonon interaction in relaxation of photoexcited electron-hole plasma in semiconductors  

SciTech Connect (OSTI)

The role of screening of the interaction of the electron-hole plasma with optical phonons is analytically evaluated by the example of gallium arsenide.

Kumekov, S. E. [Kazakh National Technical University (Kazakhstan)], E-mail: skumekov@mail.ru

2008-08-15T23:59:59.000Z

451

E-Print Network 3.0 - anisotropy physics Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

physics Search Powered by Explorit Topic List Advanced Search Sample search results for: anisotropy physics Page: << < 1 2 3 4 5 > >> 1 Gallium crystallization: implication for the...

452

STATEMENT OF CONSIDERATIONS REQUEST BY CREE, INC. FOR AN ADVANCED...  

Broader source: Energy.gov (indexed) [DOE]

in the design and.manufacture of commercial semiconductor products utilizing silicon carbide and gallium nitride technologies. Cree states it is the owner or licensee to over 500...

453

STATEMENT OF CONSIDERATIONS REQUEST BY CREE, INC. FOR AN ADVANCED...  

Broader source: Energy.gov (indexed) [DOE]

in the design and manufacture of commercial semiconductor products utilizing silicon carbide and gallium nitride technologies. In addition Cree has more than 300 domestic patents...

454

High Temperature, High Voltage Fully Integrated Gate Driver Circuit  

Broader source: Energy.gov (indexed) [DOE]

temperature gate drive is being developed for use with future wide band gap (silicon carbide and gallium nitride) switching devices. * Universal drive that is capable of driving...

455

J O U R N A L O F C H E M I S T R Y  

E-Print Network [OSTI]

interactions in inhibiting the efficient widescale commercial utilization of polymeric electro for polymeric electro-optic modulators; however, in with devices fabricated from lithium niobate and gallium

Walba, David

456

Atomistic Study of the Melting Behavior of Single Crystalline...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and 110-oriented lateral facets, respectively. Citation: Wang Z, X Zu, F Gao, and WJ Weber.2007."Atomistic Study of the Melting Behavior of Single Crystalline Wurtzite Gallium...

457

THERMODYNAMICS OF SOLID AND LIQUID GROUP III-V ALLOYS  

E-Print Network [OSTI]

a high temperature heat capacity for liquid gallium which isthe molar heat capacity of the stoichiometric liquid and theheat capacity of the supercooled stoichiometric binary liquid

Anderson, T.J.

2011-01-01T23:59:59.000Z

458

E-Print Network 3.0 - aluminum alloys grain Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

aluminum... -lithium and aluminum-gallium has been studied. In ... Source: DOE Office of Energy Efficiency and Renewable Energy, Hydrogen, Fuel Cells and Infrastructure...

459

Tailored Ceramics for Laser Applications /  

E-Print Network [OSTI]

diffusion kinetics of rare-earth elements in YAG. . . .values for rare- earth elements in YAG. . . . . . . . . .6] D. J. Cherniak, “Rare earth element and gallium diffusion

Hollingsworth, Joel Philip

2013-01-01T23:59:59.000Z

460

Performance testing and Bayesian Reliability Analysis of small diameter, high power electric heaters for the simulation of nuclear fuel rod temperatures.  

E-Print Network [OSTI]

??The conversion of plutonium from a nuclear weapon to nuclear reactor fuel requires an evaluation of the residual gallium as a potential corrosive material within… (more)

O'Kelly, David Sean

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Energy Storage Systems 2010 Update Conference Presentations ...  

Broader source: Energy.gov (indexed) [DOE]

- Bulk Gallium Nitride Substrates - Karen Waldrip, SNL.pdf More Documents & Publications Energy Storage & Power Electronics 2008 Peer Review - Power Electronics (PE) Systems...

462

aircraft exhaust plumes: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ocean before descending to the core. We report results of laboratory experiments-forming metals. Single gallium drop experiments and experiments on Rayleigh-Taylor instabilities...

463

aircraft plume model: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ocean before descending to the core. We report results of laboratory experiments-forming metals. Single gallium drop experiments and experiments on Rayleigh-Taylor instabilities...

464

ablation plume propagation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ocean before descending to the core. We report results of laboratory experiments-forming metals. Single gallium drop experiments and experiments on Rayleigh-Taylor instabilities...

465

ablation plume expansion: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ocean before descending to the core. We report results of laboratory experiments-forming metals. Single gallium drop experiments and experiments on Rayleigh-Taylor instabilities...

466

ablation plume thermalization: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ocean before descending to the core. We report results of laboratory experiments-forming metals. Single gallium drop experiments and experiments on Rayleigh-Taylor instabilities...

467

ablation plume dynamics: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ocean before descending to the core. We report results of laboratory experiments-forming metals. Single gallium drop experiments and experiments on Rayleigh-Taylor instabilities...

468

Diamonds are an Electronic Device's Best Friend | Department...  

Broader source: Energy.gov (indexed) [DOE]

way to combine diamond films with two other materials important for advanced devices, graphene and gallium nitride. Graphene is a rising star of the materials science world, with...

469

Categorical Exclusion Determination Form  

Broader source: Energy.gov (indexed) [DOE]

of SubMIC components, including the proprietary PolyStrata micro-coaxial transformer, Gallium Nitride integrated circuits, and Complementary Metal-Oxide Semiconductors,...

470

Alta Devices Develops World Record Setting Thin-Film Solar Cell  

Office of Energy Efficiency and Renewable Energy (EERE)

EERE supported the development of Alta Devices' thin film Gallium Arsenide photovoltaic technology that set a world record for conversion efficiency.

471

The new Hg-rich barium indium mercurides BaIn{sub x}Hg{sub 7?x} (x=3.1) and BaIn{sub x}Hg{sub 11?x} (x=0–2.8)  

SciTech Connect (OSTI)

The title compounds BaIn{sub x}Hg{sub 7?x} (x=3.1(1)) and BaIn{sub x}Hg{sub 11?x} (x=0–2.8) were synthesized from stoichiometric ratios of the elements in Ta crucibles. Their crystal structures have been determined using single crystal X-ray data. BaIn{sub x}Hg{sub 7?x} (x=3.1(1)) crystallizes in a new structure type (orthorhombic, oC16, space group Cmmm: a=512.02(1), b=1227.68(3), c=668.61(2) pm, Z=2, R1=0.0311). In the structure, the atoms of the three crystallographically different mixed In/Hg positions form planar nets of four-, six- and eight-membered rings. These nets are shifted against each other such that the four-membered rings form empty distorted cubes. The cubes are connected via common edges, corners and folded ladders, which are also found in BaIn{sub 2}/BaHg{sub 2} (KHg{sub 2} structure type) and BaIn (?-NaHg type). The Ba atoms are centered in the eight-membered rings and exhibit an overall coordination number of 20. The [BaM{sub 20}] polyhedra and twice as many distorted [M{sub 8}] cubes tesselate the space. BaIn{sub 2.8}Hg{sub 8.2} (cubic, cP36, space group Pm3{sup ¯}m, a=961.83(1) pm, Z=3, R1=0.0243) is the border compound of the phase width BaIn{sub x}Hg{sub 11?x} of the rare BaHg{sub 11} structure type. In the structure, ideal [M{sub 8}] cubes (at the corners of the unit cell) and BaM{sub 20} polyhedra (at the edges of the unit cell) represent the building blocks comparable to the other new In mercuride. In accordance with the increased In/Hg content, additional M-pure regions appear: the center of the unit cell contains a huge [Hg(1)M(2){sub 12}M(3,4){sub 32}] polyhedron, a Hg-centered cuboctahedron of In/Hg atoms surrounded by a capped cantellated cube of 32 additional M atoms. For both structure types, the bonding situation and the ‘coloring’, i.e. the In/Hg distribution of the polyanionic network, are discussed considering the different sizes of the atoms and the charge distribution (Bader AIM charges), which have been calculated within the framework of FP-LAPW density functional theory. - Graphical abstract: BaIn{sub 2.6}Hg{sub 4.4}: distorted cubes [(In/Hg){sub 8}] (green, like in BaHg{sub 11}), folded ladders (violet, like in BaIn, BaHg{sub 2} and BaIn{sub 2}) and Ba coordination polyhedra [Ba(In/Hg){sub 20}] (blue, like in BaHg{sub 11}). - Highlights: • The Hg-rich In-mercuride BaIn{sub 3.1}Hg{sub 3.9} crystallizes with a singular structure type. • The phase width of the BaHg{sub 11} structure in BaIn{sub x}Hg{sub 11-x} ends at x=2.8. • The relations of both compounds with other alkaline-earth mercurides are outlined. • The Hg/In coloring of the polyanion is discussed considering the structure features. • Bonding aspects are explored using band structure calculations.

Wendorff, Marco; Schwarz, Michael; Röhr, Caroline, E-mail: caroline@ruby.chemie.uni-freiburg.de

2013-07-15T23:59:59.000Z

472

JOURNAL DE PHYSIQUE Colloque C6, suppl6ment au no 8, Tome 39, aotit 1978, page RECONSTRUCTION OF ENERGY SPECTRUM OF ALLOYS Pbl-,SnXTe WITH AN INDIUM IMPURITY LEVEL  

E-Print Network [OSTI]

.25. It is seen that the Fermi surface cross- section of electrons rises with increasing pressu- re, passes

Paris-Sud XI, Université de

473

Explorations of new selenites of the group IIIA and IVA metals  

SciTech Connect (OSTI)

Systematic explorations of new phases in the Ga{sup III}/In{sup III}/Ge{sup IV}-Se{sup IV}-O systems by hydrothermal syntheses or solid-state reactions at high-temperature led to six new ternary compounds, namely, M{sub 2}Se{sub 2}O{sub 7} (M=Ga 1, In 2), M(OH)(SeO{sub 3}) (M=Ga 3, In 4), {alpha}-Ge(SeO{sub 3}){sub 2}5 and {beta}-Ge(SeO{sub 3}){sub 2}6. Ga{sub 2}Se{sub 2}O{sub 7}1 displays a 3D open framework composed of 2D gallium oxide layers being further bridged and capped by SeO{sub 3} groups. In{sub 2}Se{sub 2}O{sub 7}2 features a 3D indium oxide framework formed by corner- and edge- sharing InO{sub 6} octahedra with SeO{sub 3} groups attached on the cavities and the 8-member ring tunnels of the structure. The isostructural of M(OH)(SeO{sub 3}) (M=Ga 3, In 4) exhibit a 2D metal selenite layer composed of 1D edge-sharing MO{sub 6} octahedral chains that are interconnected by SeO{sub 3} groups. {alpha}-Ge(SeO{sub 3}){sub 2} (P2{sub 1}/n) 5 displays a 3D open framework with 1D 8-member ring tunnels along the a-axis while {beta}-Ge(SeO{sub 3}){sub 2} (Pa-3) 6 exhibits a condensed 3D network. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer Up to now, selenites of the group IIIA and IVA metals are still rare. Black-Right-Pointing-Pointer Hydrothermal or solid state reactions yielded six new compounds in this system. Black-Right-Pointing-Pointer They are M{sub 2}Se{sub 2}O{sub 7} (M=Ga, In), M(OH)(SeO{sub 3}) (M=Ga, In), {alpha}-Ge(SeO{sub 3}){sub 2} and {beta}-Ge(SeO{sub 3}){sub 2}. Black-Right-Pointing-Pointer They exhibit four different 3D and one 2D structural types. Black-Right-Pointing-Pointer {alpha}-Ge(SeO{sub 3}){sub 2} and {beta}-Ge(SeO{sub 3}){sub 2} represent the first examples of germanium selenites.

Kong Fang; Li Peicin; Zhang Suyun [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, 155 Yangqiao Road West, Fuzhou 350002 (China); Mao Jianggao, E-mail: mjg@fjirsm.ac.cn [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, 155 Yangqiao Road West, Fuzhou 350002 (China)

2012-06-15T23:59:59.000Z

474

Supported Molten Metal Membranes for Hydrogen Separation  

SciTech Connect (OSTI)

We describe here our results on the feasibility of a novel dense metal membrane for hydrogen separation: Supported Molten Metal Membrane, or SMMM.1 The goal in this work was to develop these new membranes based on supporting thin films of low-melting, non- precious group metals, e.g., tin (Sn), indium (In), gallium (Ga), or their alloys, to provide a flux and selectivity of hydrogen that rivals the conventional but substantially more expensive palladium (Pd) or Pd alloy membranes, which are susceptible to poisoning by the many species in the coal-derived syngas, and further possess inadequate stability and limited operating temperature range. The novelty of the technology presented numerous challenges during the course of this project, however, mainly in the selection of appropriate supports, and in the fabrication of a stable membrane. While the wetting instability of the SMMM remains an issue, we did develop an adequate understanding of the interaction between molten metal films with porous supports that we were able to find appropriate supports. Thus, our preliminary results indicate that the Ga/SiC SMMM at 550 ºC has a permeance that is an order of magnitude higher than that of Pd, and exceeds the 2015 DOE target. To make practical SMM membranes, however, further improving the stability of the molten metal membrane is the next goal. For this, it is important to better understand the change in molten metal surface tension and contact angle as a function of temperature and gas-phase composition. A thermodynamic theory was, thus, developed, that is not only able to explain this change in the liquid-gas surface tension, but also the change in the solid-liquid surface tension as well as the contact angle. This fundamental understanding has allowed us to determine design characteristics to maintain stability in the face of changing gas composition. These designs are being developed. For further progress, it is also important to understand the nature of solution and permeation process in these molten metal membranes. For this, a comprehensive microkinetic model was developed for hydrogen permeation in dense metal membranes, and tested against data for Pd membrane over a broad range of temperatures.3 It is planned to obtain theoretical and experimental estimates of the parameters to corroborate the model against mental results for SMMM.

Datta, Ravindra; Ma, Yi Hua; Yen, Pei-Shan; Deveau, Nicholas; Fishtik, Ilie; Mardilovich, Ivan

2013-09-30T23:59:59.000Z

475

Photonics Research and Development  

SciTech Connect (OSTI)

During the period August 2005 through October 2009, the UNLV Research Foundation (UNLVRF), a non-profit affiliate of the University of Nevada, Las Vegas (UNLV), in collaboration with UNLVâ??s Colleges of Science and Engineering; Boston University (BU); Oak Ridge National Laboratory (ORNL); and Sunlight Direct, LLC, has managed and conducted a diverse and comprehensive research and development program focused on light-emitting diode (LED) technologies that provide significantly improved characteristics for lighting and display applications. This final technical report provides detailed information on the nature of the tasks, the results of the research, and the deliverables. It is estimated that about five percent of the energy used in the nation is for lighting homes, buildings and streets, accounting for some 25 percent of the average homeâ??s electric bill. However, the figure is significantly higher for the commercial sector. About 60 percent of the electricity for businesses is for lighting. Thus replacement of current lighting with solid-state lighting technology has the potential to significantly reduce this nationâ??s energy consumption â?? by some estimates, possibly as high as 20%. The primary objective of this multi-year R&D project has been to develop and advance lighting technologies to improve national energy conversion efficiencies; reduce heat load; and significantly lower the cost of conventional lighting technologies. The UNLVRF and its partners have specifically focused these talents on (1) improving LED technologies; (2) optimizing hybrid solar lighting, a technology which potentially offers the benefits of blending natural with artificial lighting systems, thus improving energy efficiency; and (3) building a comprehensive academic infrastructure within UNLV which concentrates on photonics R&D. Task researchers have reported impressive progress in (1) the development of quantum dot laser emitting diodes (QDLEDs) which will ultimately improve energy efficiency and lower costs for display and lighting applications (UNLV College of Engineering); (2) advancing green LED technology based on the Indium-Gallium-Nitride system (BU), thus improving conversion efficiencies; (3) employing unique state-of-the-art X-ray, electron and optical spectroscopies with microscopic techniques to learn more about the electronic structure of materials and contacts in LED devices (UNLV College of Science); (4) establishing a UNLV Display Lighting Laboratory staffed with a specialized team of academic researchers, students and industrial partners focused on identifying and implementing engineering solutions for lighting display-related problems; and (5) conducting research, development and demonstration for HSL essential to the resolution of technological barriers to commercialization.

Pookpanratana, Sujitra; Shlayan, Neveen; Venkat, Rama; Das, Bisjwajit; Boehm, Bob; Heske, Clemens; Fraser, Donald; Moustakas, Theodore

2010-01-15T23:59:59.000Z

476

TESLA-FEL 2007-03 Application of low cost GaAs LED as neutron  

E-Print Network [OSTI]

neutrons in unbiased Gallium Arsenide (GaAs) Light Emitting Diodes (LED) resulted in a reduction Keywords: COTS components, Displacement damage, Electron Linear Accelerator, GaAs Light emitting diode (LED) Gallium Arsenide (GaAs) light emitting diode (LED) for the assessment of integrated neutron fluence

477

This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE JOURNAL OF PHOTOVOLTAICS 1  

E-Print Network [OSTI]

as presented, with the exception of pagination. IEEE JOURNAL OF PHOTOVOLTAICS 1 Gallium Arsenide Solar Cell--Gallium arsenide, nanospheres, photovoltaic systems, whispering gallery modes (WGMs). I. INTRODUCTION THE route as the active layer is thinned [2]. Thin-film photovoltaics offer the possibility to significantly reduce

Atwater, Harry

478

Induced Optical Losses in Optoelectronic Devices due to Focused Ion Beam Damages  

E-Print Network [OSTI]

A study of damages caused by gallium focused ion beam (FIB) into III-V compounds is presented. Potential damages caused by local heating, ion implantation, and selective sputtering are presented. Preliminary analysis shows that local heating is negligible. Gallium implantation is shown to occur over areas tens of nanometers thick. Gallium accumulation as well as selective sputtering during III-V compounds milling is expected. Particularly, for GaAs, this effect leads to gallium segregation and formation of metallic clusters. Microdisk resonators were fabricated using FIB milling with different emission currents to analyze these effects on a device. It is shown that for higher emission current, thus higher implantation doses, the cavity quality factor rapidly decreases due to optical scattering losses induced by implanted gallium atoms.

Vallini, Felipe; Reis, Elohim Fonseca dos; von Zuben, Antônio Augusto; Frateschi, Newton Cesário

2012-01-01T23:59:59.000Z

479

INVESTIGATIONS OF CuInTe2 / CdS & CdTe / CdS HETEROJUNCTION SOLAR CELLS.  

E-Print Network [OSTI]

??Thin film solar cells of Copper Indium Telluride and Cadmium Sulfide junctions were fabricated on plain ITO glass slides and also on those coated with… (more)

Gutta, Venkatesh

2011-01-01T23:59:59.000Z

480

E-Print Network 3.0 - active polymer solids Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Minerals Collection: Materials Science ; Engineering 74 Switchable window based on electrochromic polymers Chunye Xu,a) Summary: design consists of an indium tin oxide (ITO) glass...

Note: This page contains sample records for the topic "indium gallium diselenide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Redox-linked conformation change and electron transfer between...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

undergoes significant conformation change upon interaction with hematite and indium-tin oxide (ITO) surfaces. The apparent adsorption-induced conformation change causes the...

482

Luminescence-Based Spectroelectrochemical Sensor for [Tc(dmpe...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

within a Charge Abstract: A spectroelectrochemical sensor consisting of an indium tin oxide (ITO) optically transparent electrode (OTE) coated with a thin film of sulfonated...

483

Effect of Mn doping on the structural, morphological, optical...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mn doping on the structural, morphological, optical and magnetic properties of indium tin oxide films. Effect of Mn doping on the structural, morphological, optical and magnetic...

484

NREL: Jobs and Economic Competitiveness - Supply Constraints...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Supply Constraints Analysis Some of the materials used in solar PV modules, such as tellurium and indium, are rare materials in limited supply. Solar PV technologies have grown...

485

argentera massif south-western: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

eV), Z (Esiduelles, aux lacunes de phosphore et aux lacunes d'indium. Abstract. The new isotherm FTDLTS (Fourier Boyer, Edmond 322 Gochronologie par mthode conventionnelle...

486

Sandia National Laboratories: 2010 Archives  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

spatially resolved cathodoluminescence, scanning transmission electron microscopy, and finite element analysis. The results indicate that InGaN layers with 40% or greater indium...

487

Inverse-Micelle-Encapsulated Water-Enabled Bond Breaking ofDialkyl  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponses to EngineeredADepartmentDiselenide/Disulfide: A

488

Investigating Commercial Cellulase Performances Toward Specific Biomass  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponses to EngineeredADepartmentDiselenide/Disulfide:

489

Characterisation of Ga-coated and Ga-brazed aluminium  

SciTech Connect (OSTI)

This work is devoted to the brazing of aluminium using liquid gallium. Gallium was deposited on aluminium samples at {approx} 50 Degree-Sign C using a liquid gallium 'polishing' technique. Brazing was undertaken for 30 min at 500 Degree-Sign C in air. EDS (Energy Dispersive X-ray Spectroscopy) and AES (Auger Electron Spectroscopy) characterisation of Ga-coated samples has shown that the Ga surface layer thickness is of ten (or a few tens of) nanometres. Furthermore, aluminium oxide layer (Al{sub 2}O{sub 3}) was shown to be 'descaled' during Ga deposition, which ensures good conditions for further brazing. Cross-section examination of Ga-coated samples shows that liquid gallium penetrates into the aluminium grain boundaries during deposition. The thickness of the grain boundary gallium film was measured using an original EDS technique and is found to be of a few tens of nanometres. The depth of gallium grain boundary penetration is about 300 {mu}m at the deposition temperature. The fracture stress of the brazed joints was measured from tensile tests and was determined to be 33 MPa. Cross-section examination of brazed joints shows that gallium has fully dissolved into the bulk and that the joint is really autogenous. - Highlights: Black-Right-Pointing-Pointer Aluminium can be brazed using liquid gallium deposited by a 'polishing' technique. Black-Right-Pointing-Pointer The aluminium oxide layer is 'descaled' during liquid Ga 'polishing' deposition. Black-Right-Pointing-Pointer EDS can be used for determination of surface and grain boundary Ga film thickness. Black-Right-Pointing-Pointer The surface and grain boundary Ga film thickness is of a few tens of nm. Black-Right-Pointing-Pointer Surface and grain boundary gallium dissolves in the bulk during brazing.

Ferchaud, E. [Universite de Nantes, Polytech'Nantes, Laboratoire Genie des Materiaux et Procedes Associes, Rue Christian Pauc, 44306 Nantes Cedex 3 (France); Christien, F., E-mail: frederic.christien@univ-nantes.fr [Universite de Nantes, Polytech'Nantes, Laboratoire Genie des Materiaux et Procedes Associes, Rue Christian Pauc, 44306 Nantes Cedex 3 (France); Barnier, V. [Ecole Nationale Superieure des Mines, MPI, CNRS UMR5146, Centre SMS, 158 Cours Fauriel, 42023 Saint Etienne (France); Paillard, P. [Universite de Nantes, Polytech'Nantes, Laboratoire Genie des Materiaux et Procedes Associes, Rue Christian Pauc, 44306 Nantes Cedex 3 (France)

2012-05-15T23:59:59.000Z

490

Applied Materials Develops an Advanced Epitaxial Growth System to Bring Down LED Costs  

Broader source: Energy.gov [DOE]

With the help of DOE funding, Applied Materials has developed an advanced epitaxial growth system for gallium nitride (GaN) LED devices that decreases operating costs, increases internal quantum efficiency, and improves binning yields.

491

A compact transport and charge model for GaN-based high electron mobility transistors for RF applications  

E-Print Network [OSTI]

Gallium Nitride (GaN)-based high electron mobility transistors (HEMTs) are rapidly emerging as front-runners in high-power mm-wave circuit applications. For circuit design with current devices and to allow sensible future ...

Radhakrishna, Ujwal

2013-01-01T23:59:59.000Z

492

2338 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 30, NO. 4, APRIL 2015 Optically Switched-Drive-Based Unified Independent  

E-Print Network [OSTI]

as well. Index Terms--Active gate drive, di/dt, dv/dt, electromagnetic interference (EMI), gallium. However, this leads to higher di/dt and dv/dt, which in turn, causes higher electromagnetic interference

Mazumder, Sudip K.

493

A-15 Superconducting composite wires and a method for making  

DOE Patents [OSTI]

A method for fabricating superconducting wires wherein a billet of copper containing filaments of niobium or vanadium is rolled to form a strip which is wrapped about a tin-alloy core to form a composite. The alloy is a tin-copper alloy for niobium filaments and a gallium-copper alloy for vanadium filaments. The composite is then drawn down to a desired wire size and heat treated. During the heat treatment process, the tin in the bronze reacts with the niobium to form the superconductor niobium tin. In the case where vanadium is used, the gallium in the gallium bronze reacts with the vanadium to form the superconductor vanadium gallium. This new process eliminates the costly annealing steps, external tin plating and drilling of bronze ingots required in a number of prior art processes.

Suenaga, Masaki (Bellport, NY); Klamut, Carl J. (East Patchogue, NY); Luhman, Thomas S. (Westhampton Beach, NY)

1984-01-01T23:59:59.000Z

494

Wrapping process for fabrication of A-15 superconducting composite wires  

DOE Patents [OSTI]

A method for fabricating superconducting wires wherein a billet of copper containing filaments of niobium or vanadium is rolled to form a strip which is wrapped about a tin-alloy core to form a composite. The alloy is a tin-copper alloy for niobium filaments and a gallium-copper alloy for vanadium filaments. The composite is then drawn down to a desired wire size and heat treated. During the heat treatment process, the tin in the bronze reacts with the niobium to form the superconductor niobium tin. In the case where vanadium is used, the gallium in the gallium bronze reacts with the vanadium to form the superconductor vanadium gallium. This new process eliminates the costly annealing steps, external tin plating and drilling of bronze ingots required in a number of prior art processes.

Suenaga, M.; Klamut, C.J.; Luhman, T.S.

1980-08-15T23:59:59.000Z

495

U.S. GEOLOGICAL SURVEY--MINERALS INFORMATION 1 By Deborah A. Kramer  

E-Print Network [OSTI]

). to produce optoelectronic devices and integrated circuits for Increased demand for GaAs resulted in several U. Consumption Optoelectronic devices continued to be the largest end use for gallium, with 59% of total

496

Calendar | OSTI, US Dept of Energy, Office of Scientific and...  

Office of Scientific and Technical Information (OSTI)

Application Center 2014-10-16 13:32 Advanced Epi Tools for Gallium Nitride Light Emitting Diode Devices 2014-10-16 13:32 CHEMICAL ANALYSIS OF SIMULATED HIGH LEVEL WASTE...

497

2H NMR | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NMR Leads No leads are available at this time. Local environment and composition of magnesium gallium layered double hydroxides determined from solid-state 1H and 71Ga NMR...

498

EMSL - 2H NMR  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

tags2h-nmr en Local environment and composition of magnesium gallium layered double hydroxides determined from solid-state 1H and 71Ga NMR http:www.emsl.pnl.govemslweb...

499

EMSL - In situ catalysis  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

situ-catalysis en Local environment and composition of magnesium gallium layered double hydroxides determined from solid-state 1H and 71Ga NMR http:www.emsl.pnl.govemslweb...

500

In situ catalysis | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Leads No leads are available at this time. Local environment and composition of magnesium gallium layered double hydroxides determined from solid-state 1H and 71Ga NMR...