Powered by Deep Web Technologies
Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Midwest Independent System Operator (Multiple States)  

Broader source: Energy.gov [DOE]

Midwest Independent Transmission System Operator (MISO) is a Regional Transmission Organization, which administers wholesale electricity markets in all or parts of 11 U.S. states and the Canadian...

2

New York Independent System Operator, Smart Grid RFI: Addressing...  

Broader source: Energy.gov (indexed) [DOE]

York Independent System Operator, Smart Grid RFI: Addressing Policy and Logistical Challenges. New York Independent System Operator, Smart Grid RFI: Addressing Policy and...

3

A review of market monitoring activities at U.S. independent system operators  

SciTech Connect (OSTI)

Policymakers have increasingly recognized the structural impediments to effective competition in electricity markets, which has resulted in a renewed emphasis on the need for careful market design and market monitoring in wholesale and retail electricity markets. In this study, we review the market monitoring activities of four Independent System Operators in the United States, focusing on such topics as the organization of an independent market monitoring unit (MMU), the role and value of external market monitors, performance metrics and indices to aid in market analysis, issues associated with access to confidential market data, and market mitigation and investigation authority. There is consensus across the four ISOs that market monitoring must be organizationally independent from market participants and that ISOs should have authority to apply some degree of corrective actions on the market, though scope and implementation differ across the ISOs. Likewise, current practices regarding access to confidential market data by state energy regulators varies somewhat by ISO. Drawing on our interviews and research, we present five examples that illustrate the impact and potential contribution of ISO market monitoring activities to enhance functioning of wholesale electricity markets. We also discuss several key policy and implementation issues that Western state policymakers and regulators should consider as market monitoring activities evolve in the West.

Lesieutre, Bernard C.; Goldman, Charles; Bartholomew, Emily

2004-01-01T23:59:59.000Z

4

New York Independent System Operator, Inc. Smart Grid Project | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company) Jump to: navigation,0558143°Information System Operator,

5

Independent Oversight Review, Richland Operations Office and...  

Broader source: Energy.gov (indexed) [DOE]

Operations Office and CH2M Hill Plateau Remediation Company and Mission Support Alliance Conduct of Operations f an independent oversight review of Richland Operations Office,...

6

Independent Activity Report, Savannah River Operation - June...  

Broader source: Energy.gov (indexed) [DOE]

Operation - June 2010 Independent Activity Report, Savannah River Operation - June 2010 June 2010 Savannah River Operations Office Self-Assessment of the Technical Qualification...

7

Independent Activity Report, Hanford Operations Office - July...  

Broader source: Energy.gov (indexed) [DOE]

assessment included evaluation of work control, fall protection, quality assurance, and conduct of operations. Independent Activity Report, Hanford Operations Office - July 2010...

8

Independent Oversight Review, Savannah River Operations Office...  

Energy Savers [EERE]

Savannah River Operations Office - July 2013 Independent Oversight Review, Savannah River Operations Office - July 2013 July 2013 Review of the Employee Concerns Program at the...

9

Abstract--The California Independent System Operator Corporation (CAISO) is in charge of managing the electricity  

E-Print Network [OSTI]

the entire WECC network and consists of the detailed representation of the CAISO control grid and a simplified representation of the WECC (Western Electricity Coordinating Council) bulk power system. Creating

McCalley, James D.

10

Lessons from Iowa : development of a 270 megawatt compressed air energy storage project in midwest Independent System Operator : a study for the DOE Energy Storage Systems Program.  

SciTech Connect (OSTI)

The Iowa Stored Energy Park was an innovative, 270 Megawatt, $400 million compressed air energy storage (CAES) project proposed for in-service near Des Moines, Iowa, in 2015. After eight years in development the project was terminated because of site geological limitations. However, much was learned in the development process regarding what it takes to do a utility-scale, bulk energy storage facility and coordinate it with regional renewable wind energy resources in an Independent System Operator (ISO) marketplace. Lessons include the costs and long-term economics of a CAES facility compared to conventional natural gas-fired generation alternatives; market, legislative, and contract issues related to enabling energy storage in an ISO market; the importance of due diligence in project management; and community relations and marketing for siting of large energy projects. Although many of the lessons relate to CAES applications in particular, most of the lessons learned are independent of site location or geology, or even the particular energy storage technology involved.

Holst, Kent (Iowa Stored Energy Plant Agency, Traer, IA); Huff, Georgianne; Schulte, Robert H. (Schulte Associates LLC, Northfield, MN); Critelli, Nicholas (Critelli Law Office PC, Des Moines, IA)

2012-01-01T23:59:59.000Z

11

Abstract--The seven Independent System Operators and Regional Transmission Organizations (ISO/RTOs) in the United  

E-Print Network [OSTI]

such as demand side response, carbon trade, energy efficiency, renewable energy and credit risk are discussed power system [2]. Figure 1 - ISOs and RTOs in US and Canada This paper addresses several issues related

McCalley, James D.

12

GRID INDEPENDENT FUEL CELL OPERATED SMART HOME  

SciTech Connect (OSTI)

A fuel cell power plant, which utilizes a smart energy management and control (SEMaC) system, supplying the power need of laboratory based ''home'' has been purchased and installed. The ''home'' consists of two rooms, each approximately 250 sq. ft. Every appliance and power outlet is under the control of a host computer, running the SEMaC software package. It is possible to override the computer, in the event that an appliance or power outage is required. Detailed analysis and simulation of the fuel cell operated smart home has been performed. Two journal papers has been accepted for publication and another journal paper is under review. Three theses have been completed and three additional theses are in progress.

Dr. Mohammad S. Alam

2003-12-07T23:59:59.000Z

13

Independent Activity Report, Richland Operations Office - June...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

June 20-22, 2011, at the Cold Vacuum Drying Facility at the Department of Energy's Hanford Site. The activity consisted of observing an operational assessment of the facility's...

14

Utility & Regulatory Factors Affecting Cogeneration & Independent Power Plant Design & Operation  

E-Print Network [OSTI]

UTILITY & REGULATORY FACTORS AFFECTiNG COGENERATION & INDEPENDENT POWER PLANT DESIGN & OPERATION Richard P. Felak General Electric Company Schenectady, New York ABSTRACT In specifying a cogeneration or independent power plant, the owner... should be especially aware of the influences which electric utilities and regulatory bodies will have on key parameters such as size, efficiency, design. reliability/ availabilitY, operating capabilities and modes, etc. This paper will note examples...

Felak, R. P.

15

Operating System Resource Management  

E-Print Network [OSTI]

Operating System Resource Management Date: Monday, September 27, 2010 Time: 2:00 ­ 3:00 pm Location constrained. This talk will propose a scheme for addressing the operating system resource management problem Sciences Seminar Series presents Pacific Northwest National Laboratory Resource management is the dynamic

16

A model technology transfer program for independent operators  

SciTech Connect (OSTI)

In August 1992, the Energy Research Center (ERC) at the University of Kansas was awarded a contract by the US Department of Energy (DOE) to develop a technology transfer regional model. This report describes the development and testing of the Kansas Technology Transfer Model (KTTM) which is to be utilized as a regional model for the development of other technology transfer programs for independent operators throughout oil-producing regions in the US. It describes the linkage of the regional model with a proposed national technology transfer plan, an evaluation technique for improving and assessing the model, and the methodology which makes it adaptable on a regional basis. The report also describes management concepts helpful in managing a technology transfer program.

Schoeling, L.G.

1996-08-01T23:59:59.000Z

17

California Independent System Operator | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Areais3: Crystalline RockCaldera2CaliforniaCalifornia

18

Operational-Condition-Independent Criteria Dedicated to Monitoring Wind Turbine Generators: Preprint  

SciTech Connect (OSTI)

To date the existing wind turbine condition monitoring technologies and commercially available systems have not been fully accepted for improving wind turbine availability and reducing their operation and maintenance costs. One of the main reasons is that wind turbines are subject to constantly varying loads and operate at variable rotational speeds. As a consequence, the influences of turbine faults and the effects of varying load and speed are coupled together in wind turbine condition monitoring signals. So, there is an urgent need to either introduce some operational condition de-coupling procedures into the current wind turbine condition monitoring techniques or develop a new operational condition independent wind turbine condition monitoring technique to maintain high turbine availability and achieve the expected economic benefits from wind. The purpose of this paper is to develop such a technique. In the paper, three operational condition independent criteria are developed dedicated for monitoring the operation and health condition of wind turbine generators. All proposed criteria have been tested through both simulated and practical experiments. The experiments have shown that these criteria provide a solution for detecting both mechanical and electrical faults occurring in wind turbine generators.

Yang, W.; Sheng, S.; Court, R.

2012-08-01T23:59:59.000Z

19

Effective time-independent analysis for quantum kicked systems  

E-Print Network [OSTI]

We present a mapping of potentially chaotic time-dependent quantum kicked systems to an equivalent effective time-independent scenario, whereby the system is rendered integrable. The time-evolution is factorized into an initial kick, followed by an evolution dictated by a time-independent Hamiltonian and a final kick. This method is applied to the kicked top model. The effective time-independent Hamiltonian thus obtained, does not suffer from spurious divergences encountered if the traditional Baker-Cambell-Hausdorff treatment is used. The quasienergy spectrum of the Floquet operator is found to be in excellent agreement with the energy levels of the effective Hamiltonian for a wide range of system parameters. The density of states for the effective system exhibits sharp peak-like features, pointing towards quantum criticality. The dynamics in the classical limit of the integrable effective Hamiltonian shows remarkable agreement with the non-integrable map corresponding to the actual time-dependent system in the non-chaotic regime. This suggests that the effective Hamiltonian serves as a substitute for the actual system in the non-chaotic regime at both the quantum and classical level.

Jayendra N. Bandyopadhyay; Tapomoy Guha Sarkar

2014-09-04T23:59:59.000Z

20

INDEPENDENT VERIFICATION SURVEY REPORT FOR THE OPERABLE UNIT-1 LANDFILL TRENCHES, MIAMISBURG CLOSURE PROJECT  

SciTech Connect (OSTI)

INDEPENDENT VERIFICATION SURVEY REPORT FOR THE OPERABLE UNIT-1 LANDFILL TRENCHES, MIAMISBURG CLOSURE PROJECT, MIAMISBURG, OHIO DCN: 0468-SR-02-0

W.C. Adams

2010-05-24T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

INDEPENDENT VERIFICATION SURVEY REPORT OPERABLE UNIT-1 LANDFILL TRENCHES, MIAMISBURG CLOSURE PROJECT  

SciTech Connect (OSTI)

INDEPENDENT VERIFICATION SURVEY REPORT FOR THE OPERABLE UNIT-1 LANDFILL TRENCHES, MIAMISBURG CLOSURE PROJECT, MIAMISBURG, OHIO DCN: 0468-SR-03-0

W.C. Adams

2010-07-21T23:59:59.000Z

22

A system for optimizing interior daylight distribution using reflective Venetian blinds with independent blind angle control  

E-Print Network [OSTI]

An operational algorithm for blind angle control is developed to optimize the daylighting performance of a system of reflective Venetian blinds. Numerical modeling and experiment confirm that independent control of alternating ...

McGuire, Molly E

2005-01-01T23:59:59.000Z

23

SPECTR System Operational Test Report  

SciTech Connect (OSTI)

This report overviews installation of the Small Pressure Cycling Test Rig (SPECTR) and documents the system operational testing performed to demonstrate that it meets the requirements for operations. The system operational testing involved operation of the furnace system to the design conditions and demonstration of the test article gas supply system using a simulated test article. The furnace and test article systems were demonstrated to meet the design requirements for the Next Generation Nuclear Plant. Therefore, the system is deemed acceptable and is ready for actual test article testing.

W.H. Landman Jr.

2011-08-01T23:59:59.000Z

24

Transportation System Concept of Operations  

SciTech Connect (OSTI)

The Nuclear Waste Policy Act of 1982 (NWPA), as amended, authorized the DOE to develop and manage a Federal system for the disposal of SNF and HLW. OCRWM was created to manage acceptance and disposal of SNF and HLW in a manner that protects public health, safety, and the environment; enhances national and energy security; and merits public confidence. This responsibility includes managing the transportation of SNF and HLW from origin sites to the Repository for disposal. The Transportation System Concept of Operations is the core high-level OCRWM document written to describe the Transportation System integrated design and present the vision, mission, and goals for Transportation System operations. By defining the functions, processes, and critical interfaces of this system early in the system development phase, programmatic risks are minimized, system costs are contained, and system operations are better managed, safer, and more secure. This document also facilitates discussions and understanding among parties responsible for the design, development, and operation of the Transportation System. Such understanding is important for the timely development of system requirements and identification of system interfaces. Information provided in the Transportation System Concept of Operations includes: the functions and key components of the Transportation System; system component interactions; flows of information within the system; the general operating sequences; and the internal and external factors affecting transportation operations. The Transportation System Concept of Operations reflects OCRWM's overall waste management system policies and mission objectives, and as such provides a description of the preferred state of system operation. The description of general Transportation System operating functions in the Transportation System Concept of Operations is the first step in the OCRWM systems engineering process, establishing the starting point for the lower level descriptions. of subsystems and components, and the Transportation System Requirements Document. Other program and system documents, plans, instructions, and detailed designs will be consistent with and informed by the Transportation System Concept of Operations. The Transportation System Concept of Operations is a living document, enduring throughout the OCRWM systems engineering lifecycle. It will undergo formal approval and controlled revisions as appropriate while the Transportation System matures. Revisions will take into account new policy decisions, new information available through system modeling, engineering investigations, technical analyses and tests, and the introduction of new technologies that can demonstrably improve system performance.

N. Slater-Thompson

2006-08-16T23:59:59.000Z

25

SNS Target Systems Operational  

E-Print Network [OSTI]

a failed gas seal on the shaft and leaking oil seals but has operated well since then · The moderator 7.5 k First target replacement · No observed corrosion · Internal Boroscope examination in progress · ~ 50 mm

McDonald, Kirk

26

Independent engineering review of the Hanford Waste Vitrification System  

SciTech Connect (OSTI)

The Hanford Waste Vitrification Plant (HWVP) was initiated in June 1987. The HWVP is an essential element of the plan to end present interim storage practices for defense wastes and to provide for permanent disposal. The project start was justified, in part, on efficient technology and design information transfer from the prototype Defense Waste Processing Facility (DWPF). Development of other serial Hanford Waste Vitrification System (HWVS) elements, such as the waste retrieval system for the double-shell tanks (DSTs), and the pretreatment system to reduce the waste volume converted into glass, also was required to accomplish permanent waste disposal. In July 1991, at the time of this review, the HWVP was in the Title 2 design phase. The objective of this technical assessment is to determine whether the status of the technology development and engineering practice is sufficient to provide reasonable assurance that the HWVP and the balance of the HWVS system will operate in an efficient and cost-effective manner. The criteria used to facilitate a judgment of potential successful operation are: vitrification of high-level radioactive waste from specified DSTs on a reasonably continuous basis; and glass produced with physical and chemical properties formally acknowledge as being acceptable for disposal in a repository for high-level radioactive waste. The criteria were proposed specifically for the Independent Engineering Review to focus that assessment effort. They are not represented as the criteria by which the Department will judge the prudence of the Project. 78 refs., 10 figs., 12 tabs.

Not Available

1991-10-01T23:59:59.000Z

27

Operating Systems Introduction  

E-Print Network [OSTI]

by the environment" 4 Introduction (2) ¿ Examples of real-time systems: ¿ plant control ¿ control of production systems ¿ space missions ¿ household appliances ¿ virtual / augmented reality #12;3 5 Introduction (3 of application: ¿ Automotive: · power-train control, air-bag control, steer by wire, brake by wire ¿ Aircraft

Bogliolo, Alessandro

28

Formal Specification of Operating System Operations  

E-Print Network [OSTI]

and Engineering Florida Atlantic University Boca Raton, FL 33431 dan@cse.fau.edu Paul E. Black National Institute system se­ curity policies in the higher­order logic theorem prover, HOL98 [Gordon (1987)]. Formal spec

Black, Paul E.

29

Potential Operation and Maintenance (O&M) Savings at Schools in the Ft. Worth Independent School District  

E-Print Network [OSTI]

31 State Energy Conservation Office Energy Systems Laboratory LoanSTAR O&M Program Texas A&M University FWISD O&M Potential in 104 Schools, P.I POTENTIAL OPERATION AND MAINTENANCE SAVINGS AT SCHOOLS IN THE FORT WORTH INDEPENDENT SCHOOL DISTRICT... Office LoanSTAR O&M Program Energy Systems Laboratory Texas A&M University FWISD O&M Potential in 104 Schools, P.I 1 Figure 3b: The Potential Savings vs the Annual Peak Demand for 104 Schools The total potential electricity and gas savings are shown...

Liu, M.; Reddy, T. A.; Claridge, D. E.; Haberl, J. S.

1993-01-01T23:59:59.000Z

30

A Computuerized Operator Support System Prototype  

SciTech Connect (OSTI)

A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operators ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energys Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment.

Ken Thomas; Ronald Boring; Roger Lew; Tom Ulrich; Richard Villim

2013-08-01T23:59:59.000Z

31

A Computuerized Operator Support System Prototype  

SciTech Connect (OSTI)

A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operators ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energys Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment.

Ken Thomas; Ronald Boring; Roger Lew; Tom Ulrich; Richard Villim

2013-11-01T23:59:59.000Z

32

Environment-independent decoherence rate in classically chaotic systems  

E-Print Network [OSTI]

We study the decoherence of a one-particle system, whose classical correpondent is chaotic, when it evolves coupled to a weak quenched environment. This is done by analytical evaluation of the Loschmidt Echo, (i.e. the revival of a localized density excitation upon reversal of its time evolution), in presence of the perturbation. We predict an exponential decay for the Loschmidt Echo with a (decoherence) rate which is asymptotically given by the mean Lyapunov exponent of the classical system, and therefore independent of the perturbation strength, within a given range of strengths. Our results are consistent with recent experiments of Polarization Echoes in nuclear magnetic resonance and preliminary numerical simulations.

Rodolfo A. Jalabert; Horacio M. Pastawski

2001-03-29T23:59:59.000Z

33

Ventilation Systems Operating Experience Review for Fusion Applications  

SciTech Connect (OSTI)

This report is a collection and review of system operation and failure experiences for air ventilation systems in nuclear facilities. These experiences are applicable for magnetic and inertial fusion facilities since air ventilation systems are support systems that can be considered generic to nuclear facilities. The report contains descriptions of ventilation system components, operating experiences with these systems, component failure rates, and component repair times. Since ventilation systems have a role in mitigating accident releases in nuclear facilities, these data are useful in safety analysis and risk assessment of public safety. An effort has also been given to identifying any safety issues with personnel operating or maintaining ventilation systems. Finally, the recommended failure data were compared to an independent data set to determine the accuracy of individual values. This comparison is useful for the International Energy Agency task on fusion component failure rate data collection.

Cadwallader, Lee Charles

1999-12-01T23:59:59.000Z

34

Physical Media Independence: System Support for Dynamically Available Network Interfaces  

E-Print Network [OSTI]

(PMI) is the concept of making assumptions about a particular device explicit, detecting events which PMI. Based on device availability, the model iden- ti es implicit device-related assumptions made the Interface Man- agement Module (IMM), that supports PMI in the FreeBSD operating system. The bene ts

Walpole, Jonathan

35

Midwest Independent Transmission System Operator Smart Grid Project | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocus Area Energy Efficiency, RenewableMiddleMidwest EnergyEnergy

36

Midwest Independent Transmission System Operator | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's HeatMexico: Energy Resources JumpMicrel IncOpenOpenCaliforniaMiddletown is

37

A model technology transfer program for independent operators: Kansas Technology Transfer Model (KTTM)  

SciTech Connect (OSTI)

This report describes the development and testing of the Kansas Technology Transfer Model (KTTM) which is to be utilized as a regional model for the development of other technology transfer programs for independent operators throughout oil-producing regions in the US. It describes the linkage of the regional model with a proposed national technology transfer plan, an evaluation technique for improving and assessing the model, and the methodology which makes it adaptable on a regional basis. The report also describes management concepts helpful in managing a technology transfer program. The original Tertiary Oil Recovery Project (TORP) activities, upon which the KTTM is based, were developed and tested for Kansas and have proved to be effective in assisting independent operators in utilizing technology. Through joint activities of TORP and the Kansas Geological Survey (KGS), the KTTM was developed and documented for application in other oil-producing regions. During the course of developing this model, twelve documents describing the implementation of the KTTM were developed as deliverables to DOE. These include: (1) a problem identification (PI) manual describing the format and results of six PI workshops conducted in different areas of Kansas, (2) three technology workshop participant manuals on advanced waterflooding, reservoir description, and personal computer applications, (3) three technology workshop instructor manuals which provides instructor material for all three workshops, (4) three technologies were documented as demonstration projects which included reservoir management, permeability modification, and utilization of a liquid-level acoustic measuring device, (5) a bibliography of all literature utilized in the documents, and (6) a document which describes the KTTM.

Schoeling, L.G.

1993-09-01T23:59:59.000Z

38

CIS 380 Operating Systems Course Number & Title (A.1) CIS 380 Operating Systems  

E-Print Network [OSTI]

CIS 380 Operating Systems Course Number & Title (A.1) CIS 380 Operating Systems Credit Units (A.2 Operating Systems (3/e). Prentice Hall, Supplementary text: W. Richard Stevens and Stephen A. Rago. Advanced) This course is an introduction to the theory and practice behind modern computer operating systems. Topics

Plotkin, Joshua B.

39

WATER DISTRIBUTION SYSTEM OPERATION: APPLICATION OF  

E-Print Network [OSTI]

CHAPTER 5 WATER DISTRIBUTION SYSTEM OPERATION: APPLICATION OF SIMULATED ANNEALING Fred E. Goldman Arizona State University, Tempe, Arizona 5.1 INTRODUCTION The operation of water distribution systems affects the water quality in these systems. EPA regulations require that water quality be maintained

Mays, Larry W.

40

DOE-backed independent scrubber system is criticized by AEP  

SciTech Connect (OSTI)

Among the five early contract signers from the second round of 16 clean-coal technologies selected by the Dept of Energy (DOE) for partial funding was Pure Air's flue-gas desulfurization (FGD) technology-and-service project for Northern Indiana Public Service Co (Nipsco). Pure Air is not only financing, designing, and building the $141-million Nipsco advanced wet-scrubber system at Units 7 (183 MW) and 8 (345 MW) of the utility's Bailly powerplant, it is also operating and maintaining the scrubber. It is the own-and-operate approach that caught DOE's eye, because it allows utilities who are inexperienced in running a complex chemical plant to remain focused on electricity production while avoiding a major capital expense. American Electric Power Service Co questions the service contract, but not the technology. AEP's assistant general counsel foresees a full array of possibilities associated with contract complexity when dealing with removal. The paper briefly describes these complexities.

Not Available

1990-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Integrating Solar PV in Utility System Operations  

E-Print Network [OSTI]

Laboratory National Renewable Energy Laboratory Universityof Energy Efficiency and Renewable Energy (Solar EnergySystem Operations Table 27. Renewable Curtailment in the BR

Mills, A.

2014-01-01T23:59:59.000Z

42

Load-follow operation with the MSHIM control system  

SciTech Connect (OSTI)

As part of Westinghouse Electric Corporation's ongoing efforts to improve plant daily load-follow capability, a system has been developed that promises a significant enhancement of current load-maneuvering capabilities, while simultaneously reducing the burden on operators and plant systems. This concept, the mechanical shim (MSHIM), control system utilizes two independently operable groups of control banks for essentially simultaneous control of reactivity and axial power distribution. This system has been developed with the goal of supporting either of two operational modes. One mode is designed to maximize spinning reserve (MAXSR) capacity (return to full-power capability). The other mode minimizes boric (MINB) acid changes, hence effluent production, during the power maneuver. The features of the two control modes are summarized.

Morita, T.; Carlsen, B.W.; Kutz, J.P.

1988-01-01T23:59:59.000Z

43

Control System Commissioning for Enhanced Building Operations  

E-Print Network [OSTI]

This paper highlights the import role control systems play in the operation of modern buildings and describes ways to improve the final stage of commissioning. We also describe practical issues associated with modern IT-oriented control systems...

Salsbury, T. I.; Singhal, A.

2003-01-01T23:59:59.000Z

44

Onsite Wastewater Treatment Systems: Operation and Maintenance  

E-Print Network [OSTI]

To prevent health hazards to people and pollution in the environment, septic tank systems must be operated and maintained properly. This publication explains how septic systems work and how to keep them running properly....

Lesikar, Bruce J.

2008-10-23T23:59:59.000Z

45

Evaluating Utility System Operations Using APLUS  

E-Print Network [OSTI]

"Evaluating utility System Operations Using APLUS" Sanjay Pethe Sr. Process Engineer TENSA Services, Inc. 6200 Savoy Drive, Ste. 540 Houston, Texas 77036 ABSTRACT The steam system at a recycled paper fiberboard plant in Texas... Figure 1: Schematic of Steam System 86 "Evaluating utility System Operations Using APLUS" Sanjay Pethe Sr. Process Engineer Rajiv Singh Sr. Process Engineer TENSA Services, Inc. 6200 Savoy Drive, Ste. 540 Houston, Texas 77036 TENSA Services, Inc. 6200...

Pethe, S.; Singh, R.

46

Integrated Retail & Wholesale Power System Operation  

E-Print Network [OSTI]

Integrated Retail & Wholesale Power System Operation with Smart-Grid Functionality PIs: Dionysios Retail/Wholesale Power System Operation with Smart-Grid Functionality Project PIs: Dionysios Aliprantis (open-source release): AMES Wholesale Power Market Testbed (ISU) + GridLAB-D distribution platform (DOE

Tesfatsion, Leigh

47

Virtualizing Operating Systems for Seamless Distributed Environments  

E-Print Network [OSTI]

Virtualizing Operating Systems for Seamless Distributed Environments 1 Tom Boyd and Partha Dasgupta of the "Computing Communities" project, a joint effort between Arizona State University and New York University. Abstract Applications and operating systems can be augmented with extra functionality by injecting

Dasgupta, Partha

48

Electrostatic coalescence system with independent AC and DC hydrophilic electrodes  

DOE Patents [OSTI]

An improved electrostatic coalescence system is provided in which independent AC and DC hydrophilic electrodes are employed to provide more complete dehydration of an oil emulsion. The AC field is produced between an AC electrode array and the water-oil interface wherein the AC electrode array is positioned parallel to the interface which acts as a grounded electrode. The emulsion is introduced into the AC field in an evenly distributed manner at the interface. The AC field promotes drop-drop and drop-interface coalescence of the water phase in the entering emulsion. The continuous oil phase passes upward through the perforated AC electrode array and enters a strong DC field produced between closely spaced DC electrodes in which small dispersed droplets of water entrained in the continuous phase are removed primarily by collection at hydrophilic DC electrodes. Large droplets of water collected by the electrodes migrate downward through the AC electrode array to the interface. All phase separation mechanisms are utilized to accomplish more complete phase separation.

Hovarongkura, A. David (Arlington, VA); Henry, Jr., Joseph D. (Morgantown, WV)

1981-01-01T23:59:59.000Z

49

INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE ...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) Standard Operating Procedures INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) Standard Operating...

50

Operation of staged membrane oxidation reactor systems  

SciTech Connect (OSTI)

A method of operating a multi-stage ion transport membrane oxidation system. The method comprises providing a multi-stage ion transport membrane oxidation system with at least a first membrane oxidation stage and a second membrane oxidation stage, operating the ion transport membrane oxidation system at operating conditions including a characteristic temperature of the first membrane oxidation stage and a characteristic temperature of the second membrane oxidation stage; and controlling the production capacity and/or the product quality by changing the characteristic temperature of the first membrane oxidation stage and/or changing the characteristic temperature of the second membrane oxidation stage.

Repasky, John Michael

2012-10-16T23:59:59.000Z

51

DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS  

SciTech Connect (OSTI)

This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public.

William E. Kastenberg; Edward Blandford; Lance Kim

2009-03-31T23:59:59.000Z

52

PIA - WEB Unclassified Business Operations General Support System...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support...

53

Groundwater Remediation Systems Quarterly Operations Report  

E-Print Network [OSTI]

.......................................... 5-1 6. OU III Carbon Tetrachloride Pump and Treat System ........................................ 6 = ethylene dibromide * System dismantlement for the Carbon Tetrachloride system was completed in 2010. ** EDB% NA 180 Industrial Park Recirculation/ In-Well (AS/Carbon) VOC 7 Operate- 14 Standby-

54

Groundwater Remediation Systems Quarterly Operations Report  

E-Print Network [OSTI]

.......................................... 5-1 6. OU III Carbon Tetrachloride Pump and Treat System........................................ 6 = ethylene dibromide * System dismantlement for the Carbon Tetrachloride system was completed in 2010. ** EDB Standby NA 180 Industrial Park Recirculation/ In-Well (AS/Carbon) VOC 7 Operate- 14 Standby- 1 100% 1 1063

55

Groundwater Remediation Systems Quarterly Operations Report  

E-Print Network [OSTI]

.......................................... 5-1 6. OU III Carbon Tetrachloride Pump and Treat System ........................................ 6 = ethylene dibromide * System dismantlement for the Carbon Tetrachloride system was completed in 2010. ** EDB Standby NA 180 Industrial Park Recirculation/ In-Well (AS/Carbon) VOC 7 Operate- 14 Standby- 1 Standby NA

56

Groundwater Remediation Systems Quarterly Operations Report  

E-Print Network [OSTI]

.......................................... 5-1 6. OU III Carbon Tetrachloride Pump and Treat System........................................ 6 = ethylene dibromide * System dismantlement for the Carbon Tetrachloride system was completed in 2010. ** EDB Standby NA 180 Industrial Park Recirculation/ In-Well (AS/Carbon) VOC 7 Operate- 14 Standby- 1 30% NA 1062

57

Independent Verification Survey Report for the Operable Unit-1 Miamisburg Closure Project, Miamisburg, OH  

SciTech Connect (OSTI)

The objectives of the independent verification survey were to confirm that remedial actions have been effective in meeting established release criteria and that documentation accurately and adequately describes the current radiological and chemical conditions of the MCP site.

Weaver, P.

2008-03-17T23:59:59.000Z

58

Smart Grid - Transforming Power System Operations  

SciTech Connect (OSTI)

AbstractElectric power systems are entering a new realm of operations. Large amounts of variable generation tax our ability to reliably operate the system. Couple this with a greater reliance on the electricity network to serve consumer demand that is likely to rise significantly even as we drive for greater efficiency. Trade-offs between energy and environmental needs will be constantly negotiated, while a reliable supply of electricity needs even greater assurance in a world where threats of disruption have risen. Smart grid capabilities are being proposed to help address the challenges confronting system operations. This paper reviews the impact of smart grid functionality on transforming power system operations. It explores models for distributed energy resources (DER generation, storage, and load) that are appearing on the system. It reviews the evolving nature of electricity markets to deal with this complexity and a change of emphasis on signals from these markets to affect power system control. Smart grid capabilities will also impact reliable operations, while cyber security issues must be addressed as a culture change that influences all system design, implementation, and maintenance. Lastly, the paper explores significant questions for further research and the need for a simulation environment that supports such investigation and informs deployments to mitigate operational issues as they arise.

Widergren, Steven E.; Kirkham, Harold

2010-04-28T23:59:59.000Z

59

Asbestos : operating system security for mobile devices  

E-Print Network [OSTI]

This thesis presents the design and implementation of a port of the Asbestos operating system to the ARM processor. The port to the ARM allows Asbestos to run on mobile devices such as cell phones and personal digital ...

Stevenson, Martijn

2006-01-01T23:59:59.000Z

60

Energy efficient operating systems and software  

E-Print Network [OSTI]

Energy efficient system design is becoming increasingly important with the proliferation of portable, battery-operated appliances such as laptops, Personal Digital Assistants (PDAs) and cellular phones. Numerous dedicated ...

Sinha, Amit, 1976-

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Method and Apparatus Providing Deception and/or Altered Operation in an Information System Operating System  

DOE Patents [OSTI]

A method and/or system and/or apparatus providing deception and/or execution alteration in an information system. In specific embodiments, deceptions and/or protections are provided by intercepting and/or modifying operation of one or more system calls of an operating system.

Cohen, Fred (Livermore, CA); Rogers, Deanna T. (Fremont, CA); Neagoe, Vicentiu (San Leandro, CA)

2008-10-14T23:59:59.000Z

62

Impact of Utility-Scale Distributed Wind on Transmission-Level System Operations  

SciTech Connect (OSTI)

This report presents a new renewable integration study that aims to assess the potential for adding distributed wind to the current power system with minimal or no upgrades to the distribution or transmission electricity systems. It investigates the impacts of integrating large amounts of utility-scale distributed wind power on bulk system operations by performing a case study on the power system of the Independent System Operator-New England (ISO-NE).

Brancucci Martinez-Anido, C.; Hodge, B. M.

2014-09-01T23:59:59.000Z

63

Evaluating operating system vulnerability to memory errors.  

SciTech Connect (OSTI)

Reliability is of great concern to the scalability of extreme-scale systems. Of particular concern are soft errors in main memory, which are a leading cause of failures on current systems and are predicted to be the leading cause on future systems. While great effort has gone into designing algorithms and applications that can continue to make progress in the presence of these errors without restarting, the most critical software running on a node, the operating system (OS), is currently left relatively unprotected. OS resiliency is of particular importance because, though this software typically represents a small footprint of a compute node's physical memory, recent studies show more memory errors in this region of memory than the remainder of the system. In this paper, we investigate the soft error vulnerability of two operating systems used in current and future high-performance computing systems: Kitten, the lightweight kernel developed at Sandia National Laboratories, and CLE, a high-performance Linux-based operating system developed by Cray. For each of these platforms, we outline major structures and subsystems that are vulnerable to soft errors and describe methods that could be used to reconstruct damaged state. Our results show the Kitten lightweight operating system may be an easier target to harden against memory errors due to its smaller memory footprint, largely deterministic state, and simpler system structure.

Ferreira, Kurt Brian; Bridges, Patrick G. (University of New Mexico); Pedretti, Kevin Thomas Tauke; Mueller, Frank (North Carolina State University); Fiala, David (North Carolina State University); Brightwell, Ronald Brian

2012-05-01T23:59:59.000Z

64

Nova power systems: status and operating experience  

SciTech Connect (OSTI)

This paper describes the pulse power systems that are used in these lasers; the status and the operating experiences. The pulsed power system for the Nova Laser is comprised of several distinct technology areas. The large capacitor banks for driving flashlamps that excite the laser glass is one area, the fast pulsers that drive pockels cell shutters is another area, and the contol system for the pulsed power is a third. This paper discusses the capacitor banks and control systems.

Whitham, K.; Merritt, B.T.; Gritton, D.G.; Smart, A.J.; Holloway, R.W.; Oicles, J.A.

1983-11-28T23:59:59.000Z

65

Naturalistic Decision Making for Power System Operators  

SciTech Connect (OSTI)

Motivation Investigations of large-scale outages in the North American interconnected electric system often attribute the causes to three Ts: Trees, Training and Tools. To document and understand the mental processes used by expert operators when making critical decisions, a naturalistic decision making (NDM) model was developed. Transcripts of conversations were analyzed to reveal and assess NDM-based performance criteria. Findings/Design An item analysis indicated that the operators Situation Awareness Levels, mental models, and mental simulations can be mapped at different points in the training scenario. This may identify improved training methods or analytical/ visualization tools. Originality/Value This study applies for the first time, the concepts of Recognition Primed Decision Making, Situation Awareness Levels and Cognitive Task Analysis to training of electric power system operators. Take away message The NDM approach provides a viable framework for systematic training management to accelerate learning in simulator-based training scenarios for power system operators and teams.

Greitzer, Frank L.; Podmore, Robin; Robinson, Marck; Ey, Pamela

2010-02-01T23:59:59.000Z

66

Naturalistic Decision Making For Power System Operators  

SciTech Connect (OSTI)

Abstract: Motivation -- As indicated by the Blackout of 2003, the North American interconnected electric system is vulnerable to cascading outages and widespread blackouts. Investigations of large scale outages often attribute the causes to the three Ts: Trees, Training and Tools. A systematic approach has been developed to document and understand the mental processes that an expert power system operator uses when making critical decisions. The approach has been developed and refined as part of a capability demonstration of a high-fidelity real-time power system simulator under normal and emergency conditions. To examine naturalistic decision making (NDM) processes, transcripts of operator-to-operator conversations are analyzed to reveal and assess NDM-based performance criteria. Findings/Design -- The results of the study indicate that we can map the Situation Awareness Level of the operators at each point in the scenario. We can also identify clearly what mental models and mental simulations are being performed at different points in the scenario. As a result of this research we expect that we can identify improved training methods and improved analytical and visualization tools for power system operators. Originality/Value -- The research applies for the first time, the concepts of Recognition Primed Decision Making, Situation Awareness Levels and Cognitive Task Analysis to training of electric power system operators. Take away message -- The NDM approach provides an ideal framework for systematic training management and mitigation to accelerate learning in team-based training scenarios with high-fidelity power grid simulators.

Greitzer, Frank L.; Podmore, Robin; Robinson, Marck; Ey, Pamela

2009-06-23T23:59:59.000Z

67

Sustaining Operational Efficiency of a CHP System  

SciTech Connect (OSTI)

This chapter provides background information on why sustaining operations of combined cooling, heating and power systems is important, provides the algorithms for CHP system performance monitoring and commissioning verification, and concludes with a discussion on how these algorithms can be deployed.

Katipamula, Srinivas; Brambley, Michael R.

2010-01-04T23:59:59.000Z

68

Groundwater Remediation Systems Quarterly Operations Report  

E-Print Network [OSTI]

.......................................... 5-1 6. OU III Carbon Tetrachloride Pump and Treat System ........................................ 6 for the Carbon Tetrachloride system was completed in 2010. ** EDB has only been detected in the influent at trace and Recirculate Tritium 4 Operate- 9 Standby- 7 100% NA 180 Industrial Park Recirculation/ In-Well (AS/Carbon) VOC

69

Impact of Distributed Wind on Bulk Power System Operations in ISO-NE (Presentation)  

SciTech Connect (OSTI)

The work presented in the paper corresponding to this presentation aims to study the impact of a range of penetration levels of distributed wind on the operation of the electric power system at the transmission level. This presentation is an overview of a case study on the power system in Independent System Operator New England. It is analyzed using PLEXOS, a commercial power system simulation tool

Brancucci Martinez-Anido, C.; Hodge, B. M.; Palchak, D.; Miettinen, J.

2014-11-01T23:59:59.000Z

70

Practical aspects of steam injection processes: A handbook for independent operators  

SciTech Connect (OSTI)

More than 80% of the total steam injection process operating costs are for the production of steam and the operation of surface and subsurface equipment. The proper design and operation of the surface equipment is of critical importance to the success of any steam injection operation. However, the published monographs on thermal recovery have attached very little importance to this aspect of thermal oil recovery; hence, a definite need exists for a comprehensive manual that places emphasis on steam injection field practices and problems. This handbook is an attempt to fulfill this need. This handbook explores the concept behind steam injection processes and discusses the information required to evaluate, design, and implement these processes in the field. The emphasis is on operational aspects and those factors that affect the technology and economics of oil recovery by steam. The first four chapters describe the screening criteria, engineering, and economics of steam injection operation as well as discussion of the steam injection fundamentals. The next four chapters begin by considering the treatment of the water used to generate steam and discuss in considerable detail the design, operation and problems of steam generations, distribution and steam quality determination. The subsurface aspects of steamflood operations are addressed in chapters 9 through 12. These include thermal well completion and cementing practices, insulated tubulars, and lifting equipment. The next two chapters are devoted to subsurface operational problems encountered with the use of steam. Briefly described in chapters 15 and 16 are the steam injection process surface production facilities, problems and practices. Chapter 17 discusses the importance of monitoring in a steam injection project. The environmental laws and issues of importance to steam injection operation are outlined in chapter 18.

Sarathi, P.S.; Olsen, D.K.

1992-10-01T23:59:59.000Z

71

Hatchery Evaluation Report / Lyons Ferry Hatchery - Fall Chinook : An Independent Audit Based on Integrated Hatchery Operations Teams (IHOT) Performance Measures : Final Report.  

SciTech Connect (OSTI)

This report presents the findings of the independent audit of the Lyons Ferry Hatchery (Fall Chinook). The audit is being conducted as a requirement of the Northwest Power Planning Council (NPPC) ``Strategy for Salmon`` and the Columbia River Basin Fish and Wildlife Program. Under the audit, the hatcheries are evaluated against policies and related performance measures developed by the Integrated Hatchery Operations Team (IHOT). IHOT is a multi-agency group established by the NPPC to direct the development of new basinwide standards for managing and operating fish hatcheries. The audit was conducted in April 1996 as part of a two-year effort that will include 67 hatcheries and satellite facilities located on the Columbia and Snake River system in Idaho, Oregon, and Washington. The hatchery operating agencies include the US Fish and Wildlife Service, Idaho Department of Fish and Game, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife.

Watson, Montgomery

1996-05-01T23:59:59.000Z

72

Impact of Improved Solar Forecasts on Bulk Power System Operations in ISO-NE: Preprint  

SciTech Connect (OSTI)

The diurnal nature of solar power is made uncertain by variable cloud cover and the influence of atmospheric conditions on irradiance scattering processes. Its forecasting has become increasingly important to the unit commitment and dispatch process for efficient scheduling of generators in power system operations. This study examines the value of improved solar power forecasting for the Independent System Operator-New England system. The results show how 25% solar power penetration reduces net electricity generation costs by 22.9%.

Brancucci Martinez-Anido, C.; Florita, A.; Hodge, B. M.

2014-09-01T23:59:59.000Z

73

Assessment of Offshore Wind System Design, Safety, and Operation...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Assessment of Offshore Wind System Design, Safety, and Operation Standards Assessment of Offshore Wind System Design, Safety, and Operation Standards The U.S. Department of...

74

W-026, operational test report isokenetic stack effluent monitoring system  

SciTech Connect (OSTI)

This Operational Test Report was performed to assure the Isokinetic Stack Effluent Monitoring System (ISEMS) operates in accordance with system design and specifications.

Bottenus, R.J.

1997-08-22T23:59:59.000Z

75

A graphical operations interface for modular surface systems  

E-Print Network [OSTI]

This paper presents the design and implementation of algorithms for a new graphical operations interface system specifically adapted to operating modular reconfigurable articulated surface systems. Geometric models of ...

Vona, Marsette A.

76

WRAP operational test report drum non destructive examination system  

SciTech Connect (OSTI)

This operational test report was performed to verify the WRAP Facility Drum Non-Destructive Examination systems operate in accordance with the system designs and specifications.

HUMPHRYS, K.L.

1999-07-01T23:59:59.000Z

77

Systems and Methods for Cylindrical Hall Thrusters with Independently  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign Object DamageSystems Biologyvirulence

78

Operations and Maintenance Manual for Large Aperture Scanner System  

SciTech Connect (OSTI)

Operations and maintenance manual includes detailed instructions for system assembly, use, and maintenance.

Jones, Anthony M.; Hall, Thomas E.

2010-04-08T23:59:59.000Z

79

Distribution of Wind Power Forecasting Errors from Operational Systems (Presentation)  

SciTech Connect (OSTI)

This presentation offers new data and statistical analysis of wind power forecasting errors in operational systems.

Hodge, B. M.; Ela, E.; Milligan, M.

2011-10-01T23:59:59.000Z

80

Mass independent kinetic energy reducing inlet system for vacuum environment  

DOE Patents [OSTI]

A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

Reilly, Peter T.A.

2014-05-13T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Mass independent kinetic energy reducing inlet system for vacuum environment  

DOE Patents [OSTI]

A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

Reilly, Peter T. A. [Knoxville, TN

2010-12-14T23:59:59.000Z

82

Mass independent kinetic energy reducing inlet system for vacuum environment  

DOE Patents [OSTI]

A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

Reilly, Peter T.A.

2013-12-03T23:59:59.000Z

83

Modeling Power System Operation with Intermittent Resources  

SciTech Connect (OSTI)

Electricity generating companies and power system operators face the need to minimize total fuel cost or maximize total profit over a given time period. These issues become optimization problems subject to a large number of constraints that must be satisfied simultaneously. The grid updates due to smart-grid technologies plus the penetration of intermittent re- sources in electrical grid introduce additional complexity to the optimization problem. The Renewable Integration Model (RIM) is a computer model of interconnected power system. It is intended to provide insight and advice on complex power systems management, as well as answers to integration of renewable energy questions. This paper describes RIM basic design concept, solution method, and the initial suite of modules that it supports.

Marinovici, Maria C.; Kirkham, Harold; Glass, Kevin A.; Carlsen, Leif C.

2013-02-27T23:59:59.000Z

84

An expert system for PWR core operation management  

SciTech Connect (OSTI)

Planning for restartup after planned or unplanned reactor shutdown and load-follow operations is an important task in the core operation management of pressurized water reactors (PWRs). These planning problems have been solved by planning experts using their expertise and the computational prediction of core behavior. Therefore, the quality of the plan and the time consumed in the planning depend heavily on the skillfulness of the planning experts. A knowledge engineering approach has been recently considered as a promising means to solve such complicated planning problems. Many knowledge-based systems have been developed so far, and some of them have already been applied because of their effectiveness. The expert system REPLEX has been developed to aid core management engineers in making a successful plan for the restartup or the load-follow operation of PWRs within a shorter time. It can maintain planning tasks at a high-quality level independent of the skillfulness of core management engineers and enhance the efficiency of management. REPLEX has an explanation function that helps user understanding of plans. It could be a useful took, therefore, for the training of core management engineers.

Ida, Toshio; Masuda, Masahiro; Nishioka, Hiromasa

1988-01-01T23:59:59.000Z

85

Noninterference for a practical DIFC-based operating system  

E-Print Network [OSTI]

The Flume system is an implementation of decentralized information flow control (DIFC) at the operating system level. Prior work has shown Flume can be implemented as a practical extension to the Linux operating system, ...

Tromer, Eran

86

Integrating Solar PV in Utility System Operations  

SciTech Connect (OSTI)

This study develops a systematic framework for estimating the increase in operating costs due to uncertainty and variability in renewable resources, uses the framework to quantify the integration costs associated with sub-hourly solar power variability and uncertainty, and shows how changes in system operations may affect these costs. Toward this end, we present a statistical method for estimating the required balancing reserves to maintain system reliability along with a model for commitment and dispatch of the portfolio of thermal and renewable resources at different stages of system operations. We estimate the costs of sub-hourly solar variability, short-term forecast errors, and day-ahead (DA) forecast errors as the difference in production costs between a case with realistic PV (i.e., subhourly solar variability and uncertainty are fully included in the modeling) and a case with well behaved PV (i.e., PV is assumed to have no sub-hourly variability and can be perfectly forecasted). In addition, we highlight current practices that allow utilities to compensate for the issues encountered at the sub-hourly time frame with increased levels of PV penetration. In this analysis we use the analytical framework to simulate utility operations with increasing deployment of PV in a case study of Arizona Public Service Company (APS), a utility in the southwestern United States. In our analysis, we focus on three processes that are important in understanding the management of PV variability and uncertainty in power system operations. First, we represent the decisions made the day before the operating day through a DA commitment model that relies on imperfect DA forecasts of load and wind as well as PV generation. Second, we represent the decisions made by schedulers in the operating day through hour-ahead (HA) scheduling. Peaking units can be committed or decommitted in the HA schedules and online units can be redispatched using forecasts that are improved relative to DA forecasts, but still imperfect. Finally, we represent decisions within the operating hour by schedulers and transmission system operators as real-time (RT) balancing. We simulate the DA and HA scheduling processes with a detailed unit-commitment (UC) and economic dispatch (ED) optimization model. This model creates a least-cost dispatch and commitment plan for the conventional generating units using forecasts and reserve requirements as inputs. We consider only the generation units and load of the utility in this analysis; we do not consider opportunities to trade power with neighboring utilities. We also do not consider provision of reserves from renewables or from demand-side options. We estimate dynamic reserve requirements in order to meet reliability requirements in the RT operations, considering the uncertainty and variability in load, solar PV, and wind resources. Balancing reserve requirements are based on the 2.5th and 97.5th percentile of 1-min deviations from the HA schedule in a previous year. We then simulate RT deployment of balancing reserves using a separate minute-by-minute simulation of deviations from the HA schedules in the operating year. In the simulations we assume that balancing reserves can be fully deployed in 10 min. The minute-by-minute deviations account for HA forecasting errors and the actual variability of the load, wind, and solar generation. Using these minute-by-minute deviations and deployment of balancing reserves, we evaluate the impact of PV on system reliability through the calculation of the standard reliability metric called Control Performance Standard 2 (CPS2). Broadly speaking, the CPS2 score measures the percentage of 10-min periods in which a balancing area is able to balance supply and demand within a specific threshold. Compliance with the North American Electric Reliability Corporation (NERC) reliability standards requires that the CPS2 score must exceed 90% (i.e., the balancing area must maintain adequate balance for 90% of the 10-min periods). The combination of representing DA forecast errors in the

Mills, A.; Botterud, A.; Wu, J.; Zhou, Z.; Hodge, B-M.; Heany, M.

2013-10-31T23:59:59.000Z

87

Sandia National Laboratories: Improved Power System Operations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik Spoerke SSLS Exhibit atVehicle TechnologiesImproved Power System Operations

88

1Centre for Autonomous Marine Operations and Systems -AMOSwww.ntnu.edu/amos Autonomous Marine Operations  

E-Print Network [OSTI]

06.06.2013 1 1Centre for Autonomous Marine Operations and Systems - AMOSwww.ntnu.edu/amos Centre for Autonomous Marine Operations and Systems AMOS 2013-2022 Cost: NOK 566 million AMOS Funding: NOK 240 million Research Council 2Centre for Autonomous Marine Operations and Systems - AMOSwww.ntnu.edu/amos Greener

Nørvåg, Kjetil

89

Operation of a guarded straddle packer system  

SciTech Connect (OSTI)

The Office of Nuclear Waste Isolation (ONWI) provided funds, during FY 1981, for design and construction of an S-CUBED patented guarded straddle packer (GSP) system. This unique four-packer system was developed to fill a void in current drill-stem testing technology and was specifically designed to measure flows in the very low permeability formations expected to serve as confining barriers preventing nuclide migration from repositories. This system can measure both vertical and horizontal permeabilities, distinguish between porous and fracture flow, and provide unambiguous data. The objective of the FY 1982 work was to evaluate this new drill-stem test tool under actual field conditions. This report provides a comprehensive summary of the GSP system development. Detailed design and operation information is provided and specific National Waste Terminal Storage (NWTS) program requirements which have influenced its design are identified. The FY 1982 work is reviewed, and the associated equipment preparation, pre-field testing, field testing, tool performance evaluation, site selection, and data analyses tasks are described in detail. Recommendations and conclusions are also included.

Peterson, E.; Burns, F.; Lagus, P.; Lie, K.; Wu, E.

1983-07-01T23:59:59.000Z

90

REAL TIME SYSTEM OPERATIONS 2006-2007  

SciTech Connect (OSTI)

The Real Time System Operations (RTSO) 2006-2007 project focused on two parallel technical tasks: (1) Real-Time Applications of Phasors for Monitoring, Alarming and Control; and (2) Real-Time Voltage Security Assessment (RTVSA) Prototype Tool. The overall goal of the phasor applications project was to accelerate adoption and foster greater use of new, more accurate, time-synchronized phasor measurements by conducting research and prototyping applications on California ISO's phasor platform - Real-Time Dynamics Monitoring System (RTDMS) -- that provide previously unavailable information on the dynamic stability of the grid. Feasibility assessment studies were conducted on potential application of this technology for small-signal stability monitoring, validating/improving existing stability nomograms, conducting frequency response analysis, and obtaining real-time sensitivity information on key metrics to assess grid stress. Based on study findings, prototype applications for real-time visualization and alarming, small-signal stability monitoring, measurement based sensitivity analysis and frequency response assessment were developed, factory- and field-tested at the California ISO and at BPA. The goal of the RTVSA project was to provide California ISO with a prototype voltage security assessment tool that runs in real time within California ISO?s new reliability and congestion management system. CERTS conducted a technical assessment of appropriate algorithms, developed a prototype incorporating state-of-art algorithms (such as the continuation power flow, direct method, boundary orbiting method, and hyperplanes) into a framework most suitable for an operations environment. Based on study findings, a functional specification was prepared, which the California ISO has since used to procure a production-quality tool that is now a part of a suite of advanced computational tools that is used by California ISO for reliability and congestion management.

Eto, Joseph H.; Parashar, Manu; Lewis, Nancy Jo

2008-08-15T23:59:59.000Z

91

CRAD, System Operating Test Procedures - October 23, 2014 (EA...  

Office of Environmental Management (EM)

System Operating Test Procedures - October 23, 2014 (EA CRAD 31-05, Rev. 0) CRAD, System Operating Test Procedures - October 23, 2014 (EA CRAD 31-05, Rev. 0) October 23, 2014...

92

V-174: RSA Authentication Manager Writes Operating System, SNMP...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4: RSA Authentication Manager Writes Operating System, SNMP, and HTTP Plug-in Proxy Passwords in Clear Text to Log Files V-174: RSA Authentication Manager Writes Operating System,...

93

Energy Management in Mobile Devices with the Cinder Operating System  

E-Print Network [OSTI]

We argue that controlling energy allocation is an increasingly useful and important feature for operating systems, especially on mobile devices. We present two new low-level abstractions in the Cinder operating system, ...

Roy, Arjun

94

Energy management in mobile devices with the cinder operating system  

E-Print Network [OSTI]

We argue that controlling energy allocation is an increasingly useful and important feature for operating systems, especially on mobile devices. We present two new low-level abstractions in the Cinder operating system, ...

Roy, Arjun

95

Hatchery Evaluation Report/Lyons Ferry Hatchery - Summer Steelhead : an Independent Audit Based on Integrated Hatchery Operations Team (IHOT) Performance Measures.  

SciTech Connect (OSTI)

This report presents the findings of the independent audit of the Lyons Ferry Hatchery (Summer Steelhead). Lyons Ferry Hatchery is located downstream of the confluence of the Palouse and Snake rivers, about 7 miles west of Starbuck, Washington. The hatchery is used for adult collection of tall chinook and summer steelhead, egg incubation of fall chinook, spring chinook, steelhead, and rainbow trout and rearing of fall chinook, spring chinook, summer steelhead, and rainbow trout. The audit was conducted in April 1996 as part of a two-year effort that will include 67 hatcheries and satellite facilities located on the Columbia and Snake River system in Idaho, Oregon, and Washington. The hatchery operating agencies include the U.S Fish and Wildlife Service, Idaho Department of Fish and Game, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife.

Watson, Montgomery.

1996-05-01T23:59:59.000Z

96

Hatchery Evaluation Report/Lyons Ferry Hatchery - Spring Chinook : an Independent Audit Based on Integrated Hatchery Operations Team (IHOT) Performance Measures.  

SciTech Connect (OSTI)

This report presents the findings of the independent audit of the Lyons Ferry Hatchery (Spring Chinook). Lyons Ferry Hatchery is located downstream of the confluence of the Palouse and Snake rivers, about 7 miles west of Starbuck, Washington. The hatchery is used for adult collection of fall chinook and summer steelhead, egg incubation of fall chinook, spring chinook, steelhead. and rainbow trout and rearing of fall chinook, spring chinook, summer steelhead, and rainbow trout. The audit was conducted in April 1996 as part of a two-year effort that will include 67 hatcheries and satellite facilities located on the Columbia and Snake River system in Idaho, Oregon, and Washington. The hatchery operating agencies include the U.S Fish and Wildlife Service, Idaho Department of Fish and Game, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife.

Watson, Montgomery.

1996-05-01T23:59:59.000Z

97

Independent bases on the spatial wavefunction of four-identical-particle systems  

SciTech Connect (OSTI)

We construct the independent bases on the spatial wavefunction of four-identical-particle systems classified under the rotational group SO(3) and the permutation group S{sub 4} with the usage of transformation coefficients that relate wavefunctions described in one set of internal coordinates with those in another. The basis functions for N? 2 are presented in the explicit expressions based on the harmonic oscillator model. Such independent bases are supposed to play a key role in the construction of the wavefunctions of the five-quark states and the variation calculation of four-body systems. Our prescription avoids the spurious states and can be programmed for arbitrary N.

Xiao, Shuyuan; Deng, Zhixuan; Chen, Hong [School of Physical Science and Technology, Southwest University, Chongqing 400715 (China)] [School of Physical Science and Technology, Southwest University, Chongqing 400715 (China)

2013-12-15T23:59:59.000Z

98

NOS/VE experience panel. [NOS/VE operating system  

SciTech Connect (OSTI)

The report consists of slides and accompanying remarks for the presentation on the NOS/VE operating system. (WRF)

Tisch, R.D.

1987-01-01T23:59:59.000Z

99

Calling for help is independently modulated by brain systems underlying goal-directed behavior and  

E-Print Network [OSTI]

Calling for help is independently modulated by brain systems underlying goal-directed behavior for review December 17, 2004) In primates, during times of need, calling for help is a universal experience. Calling for help recruits social support and promotes survival. However, calling for help also can attract

100

WRAP TRUPACT loading systems operational test report  

SciTech Connect (OSTI)

This Operational Test Report documents the operational testing of the TRUPACT process equipment HNF-3918, Revision 0, TRUPACT Operational Test Procedure. The test accomplished the following: Procedure validation; Facility equipment interface; Facility personnel support; and Subcontractor personnel support interface. Field changes are documented as test exceptions with resolutions. All resolutions are completed or a formal method is identified to track the resolution through to completion.

DOSRAMOS, E.V.

1999-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Generalized computer-assisted operations; A comprehensive system for day-to-day oilfield operations  

SciTech Connect (OSTI)

This paper reports that Shell Oil Co. and a U.S. subsidiary, Shell Western E and P Inc., developed a comprehensive, generalized, computer-assisted-operations (CAO) system for day-to-day oilfield operations. The system addresses many of the daily operating needs of data acquisition, well and facility monitoring and control, problem detection and diagnosis, design and/or redesign of artificial-lift systems, and oilfield data management. It is generalized in that one system, with common computer hardware, software, and techniques, serves several different oil fields with diverse operating requirements and conditions.

Dunham, C.L.; Anderson, S.R. (Shell Oil Co. (US))

1991-03-01T23:59:59.000Z

102

Computer Science Adjunct Faculty Position for Operating Systems  

E-Print Network [OSTI]

Computer Science Adjunct Faculty Position for Operating Systems Connecticut College is seeking a visiting professor (rank open) of computer science to teach one section of Operating have a Masters or equivalent in Computer Science or related field. The catalog course

Plotkin, Joshua B.

103

Method and apparatus to predict the remaining service life of an operating system  

DOE Patents [OSTI]

A method and computer-based apparatus for monitoring the degradation of, predicting the remaining service life of, and/or planning maintenance for, an operating system are disclosed. Diagnostic information on degradation of the operating system is obtained through measurement of one or more performance characteristics by one or more sensors onboard and/or proximate the operating system. Though not required, it is preferred that the sensor data are validated to improve the accuracy and reliability of the service life predictions. The condition or degree of degradation of the operating system is presented to a user by way of one or more calculated, numeric degradation figures of merit that are trended against one or more independent variables using one or more mathematical techniques. Furthermore, more than one trendline and uncertainty interval may be generated for a given degradation figure of merit/independent variable data set. The trendline(s) and uncertainty interval(s) are subsequently compared to one or more degradation figure of merit thresholds to predict the remaining service life of the operating system. The present invention enables multiple mathematical approaches in determining which trendline(s) to use to provide the best estimate of the remaining service life.

Greitzer, Frank L. (Richland, WA); Kangas, Lars J. (West Richland, WA); Terrones, Kristine M. (Los Alamos, NM); Maynard, Melody A. (Richland, WA); Pawlowski, Ronald A. (West Richland, WA), Ferryman; Thomas A. (Richland, WA); Skorpik, James R. (Kennewick, WA); Wilson, Bary W. (Coconut Creek, FL)

2008-11-25T23:59:59.000Z

104

Momentum-independent reflectionless transmission in the non-Hermitian time-reversal symmetric system  

SciTech Connect (OSTI)

We theoretically study the non-Hermitian systems, the non-Hermiticity of which arises from the unequal hopping amplitude (UHA) dimers. The distinguishing features of these models are that they have full real spectra if all of the eigenvectors are time-reversal (T) symmetric rather than parity-time-reversal (PT) symmetric, and that their Hermitian counterparts are shown to be an experimentally accessible system, which have the same topological structures as that of the original ones but modulated hopping amplitudes within the unbroken region. Under the reflectionless transmission condition, the scattering behavior of momentum-independent reflectionless transmission (RT) can be achieved in the concerned non-Hermitian system. This peculiar feature indicates that, for a certain class of non-Hermitian systems with a balanced combination of the RT dimers, the defects can appear fully invisible to an outside observer. -- Highlights: We investigate the non-Hermitian system with time reversal symmetry. The Hermitian counterpart is experimentally accessible system. The behavior of momentum-independent reflectionless transmission can be achieved. A balanced combination of reflectionless transmission dimers leads to invisibility. It paves an alternative way for the design of invisible cloaking devices.

Zhang, X.Z.; Song, Z., E-mail: nkquantum@gmail.com

2013-12-15T23:59:59.000Z

105

SOCAP: System for Operations Crisis Action Planning Marie A. Bienkowski  

E-Print Network [OSTI]

), to the problem of generating crisis action operations plans in a joint military domain* . We describe our technology to the general problem of planning and executing joint military operations including supporting or development activity has integrated a generative planning system into an operational military environment

Wilkins, David E.

106

Wind Speed Forecasting for Power System Operation  

E-Print Network [OSTI]

In order to support large-scale integration of wind power into current electric energy system, accurate wind speed forecasting is essential, because the high variation and limited predictability of wind pose profound challenges to the power system...

Zhu, Xinxin

2013-07-22T23:59:59.000Z

107

REAL TIME SYSTEM OPERATIONS 2006-2007  

E-Print Network [OSTI]

Analysis,ElectricPowerSystemResearch,Vol. 47,No. Electric PrincipalInvestigator PublicInterestEnergyResearch PhasorMeasurementUnits PointofCollapse PowerSystemsEngineeringResearch

Eto, Joseph H.

2008-01-01T23:59:59.000Z

108

Operating Systems for Reconfigurable Embedded Platforms  

E-Print Network [OSTI]

them with processors, memories, and special function blocks on configurable systems on a chip (CSoC) [1

Hellebrand, Sybille

109

Optimization of the Heating System Operation  

E-Print Network [OSTI]

on the basis of the variation of outdoor temperature, and in this way, the heating system can be optimized....

Xu, W.; Mao, S.

2006-01-01T23:59:59.000Z

110

6.828 Operating System Engineering, Fall 2006  

E-Print Network [OSTI]

6.828 teaches the fundamentals of engineering operating systems. The following topics are studied in detail: virtual memory, kernel and user mode, system calls, threads, context switches, interrupts, interprocess communication, ...

Kaashoek, Frans

111

automatic operation system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

that could interfere with the operation of the brush & basket or the sponge rubber ball type systems. BRUSH AND BASKET SYSTEM A typical... of various types of screening and...

112

Hot Water Heating System Operation and Energy Conservation  

E-Print Network [OSTI]

Based on an example of the reconstruction of a hot water heating system, this paper provides an analysis and comparison of the operations of hot water heating systems, including supply water temperature adjustment, flow adjustment during each...

Shao, Z.; Chen, H.; Wei, P.

2006-01-01T23:59:59.000Z

113

Operational results from the Saudi Solar Village Photovoltaic power system  

SciTech Connect (OSTI)

The world's largest photovoltaic power system was carried into the operation phase a few months ago. This system was developed and fabricated in the United States and it is providing electrical energy to three remote villages in Saudi Arabia. The facility includes a 350 kW photovoltaic array, 1-MW diesel powered generator, 1100 kWH lead acid batteries, a 300 KVA inverter and a solar weather data monitoring station. The photovoltaic power system is capable of completely automatic operation. It is designed to operate in stand-alone and cogeneration modes of operation.

Huraib, F.; Al-Sani, A.; Khoshami, B.H.

1982-08-01T23:59:59.000Z

114

Water turbine system and method of operation  

DOE Patents [OSTI]

A system for providing electrical power from a current turbine is provided. The system includes a floatation device and a mooring. A water turbine structure is provided having an upper and lower portion wherein the lower portion includes a water fillable chamber. A plurality of cables are used to couple the system where a first cable couples the water turbine to the mooring and a second cable couples the floatation device to the first cable. The system is arranged to allow the turbine structure to be deployed and retrieved for service, repair, maintenance and redeployment.

Costin, Daniel P.

2010-06-15T23:59:59.000Z

115

Water turbine system and method of operation  

DOE Patents [OSTI]

A system for providing electrical power from a current turbine is provided. The system includes a floatation device and a mooring. A water turbine structure is provided having an upper and lower portion wherein the lower portion includes a water fillable chamber. A plurality of cables are used to couple the system where a first cable couples the water turbine to the mooring and a second cable couples the floatation device to the first cable. The system is arranged to allow the turbine structure to be deployed and retrieved for service, repair, maintenance and redeployment.

Costin, Daniel P. (Montpelier, VT)

2011-05-10T23:59:59.000Z

116

Introduction Operations Management of Blood Banking Systems Blood Banking Systems Network Design Supply Chain Network  

E-Print Network [OSTI]

Introduction Operations Management of Blood Banking Systems Blood Banking Systems Network Design Supply Chain Network Operations Management and Design of A Sustainable Blood Banking System Amir Masoumi of Massachusetts Amherst #12;Introduction Operations Management of Blood Banking Systems Blood Banking Systems

Nagurney, Anna

117

Target System Operations and Hg Handling  

E-Print Network [OSTI]

CERN June 19-20, 2006 #12;2 OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY Hg System Safety RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY Hg System Safety Review 19-20 June 2006 Containment/vent ports will be soap- bubble checked Primary Enclosure Secondary Enclosure #12;4 OAK RIDGE NATIONAL

McDonald, Kirk

118

Operation technology of air treatment system in nuclear facilities  

E-Print Network [OSTI]

Effective operation techniques were reviewed on the air treatment system to protect the personnel in nuclear facilities from the contamination of radio-active particles and to keep the environment clear. Nuclear air treatment system consisted of the ventilation and filtering system was characterized by some test. Measurement of air velocity of blowing/exhaust fan in the ventilation system, leak tests of HEPA filters in the filtering, and measurement of pressure difference between the areas defined by radiation level were conducted. The results acquired form the measurements were reflected directly for the operation of air treatment. In the abnormal state of virus parts of devices composted of the system, the repairing method, maintenance and performance test were also employed in operating effectively the air treatment system. These measuring results and techniques can be available to the operation of air treatment system of PIEF as well as the other nuclear facilities in KAERI.

Chun, Y B; Hwong, Y H; Lee, H K; Min, D K; Park, K J; Uom, S H; Yang, S Y

2001-01-01T23:59:59.000Z

119

Commonality of ground systems in launch operations  

E-Print Network [OSTI]

NASA is examining the utility of requiring a certain degree of commonality in both flight and ground systems in the Constellation Program. While the benefits of commonality seem obvious in terms of minimizing upfront ...

Quinn, Shawn M

2008-01-01T23:59:59.000Z

120

Improving Turbocharged Diesel Engine Operation with Turbo Power Assist System  

E-Print Network [OSTI]

Improving Turbocharged Diesel Engine Operation with Turbo Power Assist System I. Kolmanovsky A. G. In this pa- per we investigate the coupling of a power assist system at the turbocharger shaft of a diesel representation of a diesel engine with a turbocharger power assist system. A turbocharger power assist system

Stefanopoulou, Anna

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

A Framework for Adaptable Operating and Runtime Systems  

SciTech Connect (OSTI)

The emergence of new classes of HPC systems where performance improvement is enabled by Moores Law for technology is manifest through multi-core-based architectures including specialized GPU structures. Operating systems were originally designed for control of uniprocessor systems. By the 1980s multiprogramming, virtual memory, and network interconnection were integral services incorporated as part of most modern computers. HPC operating systems were primarily derivatives of the Unix model with Linux dominating the Top-500 list. The use of Linux for commodity clusters was first pioneered by the NASA Beowulf Project. However, the rapid increase in number of cores to achieve performance gain through technology advances has exposed the limitations of POSIX general-purpose operating systems in scaling and efficiency. This project was undertaken through the leadership of Sandia National Laboratories and in partnership of the University of New Mexico to investigate the alternative of composable lightweight kernels on scalable HPC architectures to achieve superior performance for a wide range of applications. The use of composable operating systems is intended to provide a minimalist set of services specifically required by a given application to preclude overheads and operational uncertainties (OS noise) that have been demonstrated to degrade efficiency and operational consistency. This project was undertaken as an exploration to investigate possible strategies and methods for composable lightweight kernel operating systems towards support for extreme scale systems.

Sterling, Thomas

2014-03-04T23:59:59.000Z

122

Methods for operating parallel computing systems employing sequenced communications  

DOE Patents [OSTI]

A parallel computing system and method are disclosed having improved performance where a program is concurrently run on a plurality of nodes for reducing total processing time, each node having a processor, a memory, and a predetermined number of communication channels connected to the node and independently connected directly to other nodes. The present invention improves performance of the parallel computing system by providing a system which can provide efficient communication between the processors and between the system and input and output devices. A method is also disclosed which can locate defective nodes with the computing system. 15 figs.

Benner, R.E.; Gustafson, J.L.; Montry, G.R.

1999-08-10T23:59:59.000Z

123

Energy Efficient Operation of Ammonia Refrigeration Systems  

SciTech Connect (OSTI)

Ammonia refrigeration systems typically offer many energy efficiency opportunities because of their size and complexity. This paper develops a model for simulating single-stage ammonia refrigeration systems, describes common energy saving opportunities, and uses the model to quantify those opportunities. The simulation model uses data that are typically available during site visits to ammonia refrigeration plants and can be calibrated to actual consumption and performance data if available. Annual electricity consumption for a base-case ammonia refrigeration system is simulated. The model is then used to quantify energy savings for six specific energy efficiency opportunities; reduce refrigeration load, increase suction pressure, employ dual suction, decrease minimum head pressure set-point, increase evaporative condenser capacity, and reclaim heat. Methods and considerations for achieving each saving opportunity are discussed. The model captures synergistic effects that result when more than one component or parameter is changed. This methodology represents an effective method to model and quantify common energy saving opportunities in ammonia refrigeration systems. The results indicate the range of savings that might be expected from common energy efficiency opportunities.

Mohammed, Abdul Qayyum [University of Dayton, Ohio] [University of Dayton, Ohio; Wenning, Thomas J [ORNL] [ORNL; Sever, Franc [University of Dayton, Ohio] [University of Dayton, Ohio; Kissock, Professor Kelly [University of Dayton, Ohio] [University of Dayton, Ohio

2013-01-01T23:59:59.000Z

124

1 Introduction Danish transmission system operator  

E-Print Network [OSTI]

POWER SYSTEMS, HIGH VOLTAGES, ELECTRIC MACHINES (POWER '08) ISSN: 1790-5117 118 ISBN: 978 reactor, resonance, mutual coupling Proceedings of the 8th WSEAS International Conference on ELECTRIC-960-474-026-0 #12;TSO Energinet. dk has measured the dynamic decay of the phase voltages of the line when performing

Bak, Claus Leth

125

CFMRI Physiological Monitoring System Operator's Manual  

E-Print Network [OSTI]

and lead wires (MRI compatible) can cause patient heating or burn if not used properly. To minimize in Figure 1) · Invivo millennia® 3155MVS remote monitor (#9 in Figure 1) · BioPac System - Respiratory Belt) Turn on the Invivo 3155MVS remote monitor located in the control room. · Invivo 3155MVS should

California at San Diego, University of

126

Collective operations in a file system based execution model  

SciTech Connect (OSTI)

A mechanism is provided for group communications using a MULTI-PIPE synthetic file system. A master application creates a multi-pipe synthetic file in the MULTI-PIPE synthetic file system, the master application indicating a multi-pipe operation to be performed. The master application then writes a header-control block of the multi-pipe synthetic file specifying at least one of a multi-pipe synthetic file system name, a message type, a message size, a specific destination, or a specification of the multi-pipe operation. Any other application participating in the group communications then opens the same multi-pipe synthetic file. A MULTI-PIPE file system module then implements the multi-pipe operation as identified by the master application. The master application and the other applications then either read or write operation messages to the multi-pipe synthetic file and the MULTI-PIPE synthetic file system module performs appropriate actions.

Shinde, Pravin; Van Hensbergen, Eric

2013-02-12T23:59:59.000Z

127

Collective operations in a file system based execution model  

SciTech Connect (OSTI)

A mechanism is provided for group communications using a MULTI-PIPE synthetic file system. A master application creates a multi-pipe synthetic file in the MULTI-PIPE synthetic file system, the master application indicating a multi-pipe operation to be performed. The master application then writes a header-control block of the multi-pipe synthetic file specifying at least one of a multi-pipe synthetic file system name, a message type, a message size, a specific destination, or a specification of the multi-pipe operation. Any other application participating in the group communications then opens the same multi-pipe synthetic file. A MULTI-PIPE file system module then implements the multi-pipe operation as identified by the master application. The master application and the other applications then either read or write operation messages to the multi-pipe synthetic file and the MULTI-PIPE synthetic file system module performs appropriate actions.

Shinde, Pravin; Van Hensbergen, Eric

2013-02-19T23:59:59.000Z

128

Concept of Operations for Real-time Airborne Management System  

SciTech Connect (OSTI)

The purpose of this document is to describe the operating concepts, capabilities, and benefits of RAMS including descriptions of how the system implementations can improve emergency response, damage assessment, task prioritization, and situation awareness. This CONOPS provides general information on operational processes and procedures required to utilize RAMS, and expected performance benefits of the system. The primary audiences for this document are the end users of RAMS (including flight operators and incident commanders) and the RAMS management team. Other audiences include interested offices within the Department of Homeland Security (DHS), and officials from other state and local jurisdictions who want to implement similar systems.

Barr, Jonathan L.; Taira, Randal Y.; Orr, Heather M.

2013-03-04T23:59:59.000Z

129

Independent technical review, handbook  

SciTech Connect (OSTI)

Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

Not Available

1994-02-01T23:59:59.000Z

130

Charging system with galvanic isolation and multiple operating modes  

DOE Patents [OSTI]

Systems and methods are provided for operating a charging system with galvanic isolation adapted for multiple operating modes. A vehicle charging system comprises a DC interface, an AC interface, a first conversion module coupled to the DC interface, and a second conversion module coupled to the AC interface. An isolation module is coupled between the first conversion module and the second conversion module. The isolation module comprises a transformer and a switching element coupled between the transformer and the second conversion module. The transformer and the switching element are cooperatively configured for a plurality of operating modes, wherein each operating mode of the plurality of operating modes corresponds to a respective turns ratio of the transformer.

Kajouke, Lateef A.; Perisic, Milun; Ransom, Ray M.

2013-01-08T23:59:59.000Z

131

Impact of Distributed Wind on Bulk Power System Operations in ISO-NE: Preprint  

SciTech Connect (OSTI)

The work presented in this paper aims to study the impact of a range of penetration levels of distributed wind on the operation of the electric power system at the transmission level. This paper presents a case study on the power system in Independent System Operator New England. It is analyzed using PLEXOS, a commercial power system simulation tool. The results show that increasing the integration of distributed wind reduces total variable electricity generation costs, coal- and gas-fired electricity generation, electricity imports, and CO2 emissions, and increases wind curtailment. The variability and uncertainty of wind power also increases the start-up and shutdown costs and ramping of most conventional power plants.

Brancucci Martinez-Anido, C.; Hodge, B. M.; Palchak, D.; Miettinen, J.

2014-09-01T23:59:59.000Z

132

Systems and methods for cylindrical hall thrusters with independently controllable ionization and acceleration stages  

DOE Patents [OSTI]

Systems and methods may be provided for cylindrical Hall thrusters with independently controllable ionization and acceleration stages. The systems and methods may include a cylindrical channel having a center axial direction, a gas inlet for directing ionizable gas to an ionization section of the cylindrical channel, an ionization device that ionizes at least a portion of the ionizable gas within the ionization section to generate ionized gas, and an acceleration device distinct from the ionization device. The acceleration device may provide an axial electric field for an acceleration section of the cylindrical channel to accelerate the ionized gas through the acceleration section, where the axial electric field has an axial direction in relation to the center axial direction. The ionization section and the acceleration section of the cylindrical channel may be substantially non-overlapping.

Diamant, Kevin David; Raitses, Yevgeny; Fisch, Nathaniel Joseph

2014-05-13T23:59:59.000Z

133

Managing Uncertainty in Operational Control of Water Distribution Systems  

E-Print Network [OSTI]

Managing Uncertainty in Operational Control of Water Distribution Systems A. Bargiela Department. There are system management decisions concerning the regulatory measures such as water pricing principles, effluent in water distribution systems con- cern reservoir(s) management with associated pump scheduling

Bargiela, Andrzej

134

Virginia Tech Operating System (OS) built on VOLTTRONTM for Energy...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

such as: - Device status - V, I, P, kW, etc.... - Room temperature - Real-time pricing - Demand response signals 1 2 3 4 5 VT OS: Operating System and Framework Layer sMAP Postgre...

135

Optimizing the Day to Day Operation of Utility Systems  

E-Print Network [OSTI]

applications of this utility system software were set up for planning purposes, largely off-line. More recently, these applications have become more sophisticated and can operate on-line in real time. They include complex optimization routines to ensure...

Eastwood, A.; Bealing, C.

136

The Influence of ATM on Operating Systems Jonathan M. Smith  

E-Print Network [OSTI]

The Influence of ATM on Operating Systems Jonathan M. Smith CIS Department, University support [Smith 90, Smith 93, Chung 95] designed to expose the strengths of the ATM technology

Smith, Jonathan M.

137

Analyses of Wind Energy Impact on WFEC System Operations: Preprint  

SciTech Connect (OSTI)

The National Renewable Energy Laboratory worked with the Western Farmers Electric Cooperative to analyze the impact of wind power from the Blue Canyon Wind Power Project on WFEC system operations.

Wan, Y.; Liao, J. R.

2006-03-01T23:59:59.000Z

138

The Case for ApplicationSpecific Operating Systems  

E-Print Network [OSTI]

The Case for Application­Specific Operating Systems Thomas E. Anderson Division of Computer Science processors, higher bandwidth networks, and larger amounts of pri­ mary, secondary, and tertiary storage

Anderson, Tom

139

Individualized Independent  

E-Print Network [OSTI]

Policy in Underdeveloped Areas of Latin America) City P SC 310 Internship (Center for Sustainable Energy Policy City P SC 236 Latin American Political Systems City P SC 310 Independent Study (Domestic Energy Politics His Words: I used my CUNY BA experience to prepare me to excel in my Renewable Energy career. CUNY

Dennehy, John

140

Build, Own, Operate and Maintain (BOOM) Boiler Systems  

E-Print Network [OSTI]

Build, Own, Operate and Maintain (BOOM) Boiler Systems Tom Henry, Annstrong Service, Inc. Overview: The article addresses the growing trend in outsourcing boiler equipment, installation, operation, maintenance and ownership by large.... In most cases, thennal, electric and air energy systems are not considered "core" assets resulting in the need to find "other" solutions to providing the needed energy. ? Reduced staffing has resulted in fewer experienced and knowledgeable boiler...

Henry, T.

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Quench monitoring and control system and method of operating same  

DOE Patents [OSTI]

A rotating machine comprising a superconductive coil and a temperature sensor operable to provide a signal representative of superconductive coil temperature. The rotating machine may comprise a control system communicatively coupled to the temperature sensor. The control system may be operable to reduce electric current in the superconductive coil when a signal representative of a defined superconducting coil temperature is received from the temperature sensor.

Ryan, David Thomas; Laskaris, Evangelos Trifon; Huang, Xianrui

2006-05-30T23:59:59.000Z

142

Snap: Robust Tool for Internet-wide Operating System Fingerprinting  

E-Print Network [OSTI]

SNAP: ROBUST TOOL FOR INTERNET-WIDE OPERATING SYSTEM FINGERPRINTING A Thesis by ANKUR BHARATBHUSHAN NANDWANI Submitted to the O?ce of Graduate Studies of Texas A&M University in partial fulflllment of the requirements for the degree... of MASTER OF SCIENCE December 2010 Major Subject: Computer Science SNAP: ROBUST TOOL FOR INTERNET-WIDE OPERATING SYSTEM FINGERPRINTING A Thesis by ANKUR BHARATBHUSHAN NANDWANI Submitted to the O?ce of Graduate Studies of Texas A&M University...

Nandwani, Ankur Bharatbhushan

2012-02-14T23:59:59.000Z

143

Service Systems Engineering: New Course Development -Service Systems Operations Dana M. Johnson(1)  

E-Print Network [OSTI]

008-0523 Service Systems Engineering: New Course Development - Service Systems Operations Dana M La Jolla, California, U.S.A. May 9 to May 12, 2008 #12;Service Systems Engineering: New Course Development - Service Systems Operations Abstract A new curriculum in Service Systems Engineering, which

Onder, Nilufer

144

Standard hydrogen monitoring system-B operation and maintenance manual  

SciTech Connect (OSTI)

The purpose of this document is to provide information for the operation and maintenance of the Standards Hydrogen Monitoring System-B (SHMS-B) used in the 200E and 200W area tank farms on the Hanford site. This provides information specific to the mechanical operation of the system and is not intended to take the place of a Plant Operating Procedure. The primary function of the SHMS-B is to monitor specifically for hydrogen in the waste tank vapor space which may also contain unknown quantities of other gaseous constituents.

Bender, R.M.

1995-01-25T23:59:59.000Z

145

Operational test report -- Project W-320 cathodic protection systems  

SciTech Connect (OSTI)

Washington Administrative Code (WAC) 173-303-640 specifies that corrosion protection must be designed into tank systems that treat or store dangerous wastes. Project W-320, Waste Retrieval Sluicing System (WRSS), utilizes underground encased waste transfer piping between tanks 241-C-106 and 241-AY-102. Corrosion protection is afforded to the encasements of the WRSS waste transfer piping through the application of earthen ionic currents onto the surface of the piping encasements. Cathodic protection is used in conjunction with the protective coatings that are applied upon the WRSS encasement piping. WRSS installed two new two rectifier systems (46 and 47) and modified one rectifier system (31). WAC 173-303-640 specifies that the proper operation of cathodic protection systems must be confirmed within six months after initial installation. The WRSS cathodic protection systems were energized to begin continuous operation on 5/5/98. Sixteen days after the initial steady-state start-up of the WRSS rectifier systems, the operational testing was accomplished with procedure OTP-320-006 Rev/Mod A-0. This operational test report documents the OTP-320-006 results and documents the results of configuration testing of integrated piping and rectifier systems associated with the W-320 cathodic protection systems.

Bowman, T.J.

1998-06-16T23:59:59.000Z

146

NewsInEssence: A System For Domain-Independent, Real-Time News Clustering and Multi-Document  

E-Print Network [OSTI]

from a news Web site. Our system then searches other live sources of news for other stories relatedNewsInEssence: A System For Domain-Independent, Real-Time News Clustering and Multi,sashabg,zhuzhang,rsundara @umich.edu 1. INTRODUCTION NEWSINESSENCE is a system for finding, visualizing and sum- marizing a topic

Radev, Dragomir R.

147

NewsInEssence: A System For DomainIndependent, RealTime News Clustering and MultiDocument  

E-Print Network [OSTI]

from a news Web site. Our system then searches other live sources of news for other stories relatedNewsInEssence: A System For Domain­Independent, Real­Time News Clustering and Multi,sashabg,zhuzhang,rsundarag@umich.edu 1. INTRODUCTION NEWSINESSENCE is a system for finding, visualizing and sum­ marizing a topic

Radev, Dragomir R.

148

A simple DVH generation technique from various radiotherapy treatment planning systems for independent information system  

E-Print Network [OSTI]

In recent years, the use of PACS for radiation therapy has become the norm in hospital environment and has suggested for collecting data and management from different TPSs with DICOM objects. However, some TPS does not provide the DVH exportation with text or other format. In addition, plan review systems for various TPSs often allow DVH recalculation with different algorithms. These algorithms result in the inevitable discrepancy between the values obtained with the recalculation and those obtained with TPS itself. The purpose of this study was to develop a simple method for generating reproducible DVH values obtained from the TPSs. Treatment planning information including structures and delivered dose was exported by the DICOM format from planning systems. The supersampling and trilinear interpolation methods were employed to calculate DVH data from 35 treatment plans. The discrepancies between DVHs extracted from each TPS and the proposed calculation method were evaluated with respect to the supersampling ...

Min, Byung Jun; Jeong, Il Sun; Lee, Hyebin

2015-01-01T23:59:59.000Z

149

Operational experiences in lead-acid batteries for photovoltaic systems  

SciTech Connect (OSTI)

MIT Lincoln Laboratory has designed photovoltaic systems which use different kinds of lead-acid batteries, including units normally used for starting, lighting, and ignition (SLI) and for motive power. The experiences gained from four of these battery subsystems during field operation, particularly battery type versus system load, versus performance characteristics, and versus expected lifetime, are compared and analyzed.

Brench, B. L.

1981-01-01T23:59:59.000Z

150

Operability test report for K east basin canister cleaning system  

SciTech Connect (OSTI)

This document summarizes test data computed during the operability test procedure for the K East Basin Canister Cleaning System. Test Results show that the canister cleaning system successfully lowered the dose of each canister tested so that each canister could be disposed of as low level waste.

Crystal, J.B.

1997-01-09T23:59:59.000Z

151

Solid Waste Operations Complex (SWOC) Facilities Sprinkler System Hydraulic Calculations  

SciTech Connect (OSTI)

The attached calculations demonstrate sprinkler system operational water requirements as determined by hydraulic analysis. Hydraulic calculations for the waste storage buildings of the Central Waste Complex (CWC), T Plant, and Waste Receiving and Packaging (WRAP) facility are based upon flow testing performed by Fire Protection Engineers from the Hanford Fire Marshal's office. The calculations received peer review and approval prior to release. The hydraulic analysis program HASS Computer Program' (under license number 1609051210) is used to perform all analyses contained in this document. Hydraulic calculations demonstrate sprinkler system operability based upon each individual system design and available water supply under the most restrictive conditions.

KERSTEN, J.K.

2003-07-11T23:59:59.000Z

152

Expert operator preferences in remote manipulator control systems  

SciTech Connect (OSTI)

This report describes a survey of expert remote manipulator operators designed to identify features of control systems related to operator efficiency and comfort. It provides information for designing the control center for the Single-Shell Tank Waste Retrieval Manipulator System (TWRMS) Test Bed, described in a separate report. Research questions concerned preferred modes of control, optimum work sessions, sources of operator fatigue, importance of control system design features, and desired changes in control rooms. Participants comprised four expert remote manipulator operators at Oak Ridge National Laboratory, who individually have from 9 to 20 years of experience using teleoperators. The operators had all used rate and position control, and all preferred bilateral (force-reflecting) position control. They reported spending an average of 2.75 h in control of a teleoperator system during a typical shift. All were accustomed to working in a crew of two and alternating control and support roles in 2-h rotations in an 8-h shift. Operators reported that fatigue in using remote manipulator systems came mainly from watching TV monitors and making repetitive motions. Three of four experienced symptoms, including headaches and sore eyes, wrists, and back. Of 17 features of control rooms rated on importance, highest ratings went to comfort and support provided by the operator chair, location of controls, location of video monitors, video image clarity, types of controls, and control modes. When asked what they wanted to change, operators said work stations designed for comfort; simpler, lighter hand-controls; separate controls for each camera; better placement of remote camera; color monitors; and control room layouts that support crew interaction. Results of this small survey reinforced the importance of ergonomic factors in remote manipulation.

Sundstrom, E. [Human Machine Interfaces, Inc., Knoxville, TN (United States); Draper, J.V. [Oak Ridge National Lab., TN (United States); Fausz, A.; Woods, H. [Univ. of Tennessee, Knoxville, TN (United States)

1995-06-01T23:59:59.000Z

153

DESIGN AND IMPLEMENTATION OF A SINGLE SYSTEM IMAGE OPERATING SYSTEM FOR AD HOC NETWORKS  

E-Print Network [OSTI]

DESIGN AND IMPLEMENTATION OF A SINGLE SYSTEM IMAGE OPERATING SYSTEM FOR AD HOC NETWORKS Hongzhou and implementation of a distributed operating system for ad hoc networks. Our system simplifies the programming of ad longevity by effectively distributing energy consumption and avoiding hotspots. 1 Introduction Ad hoc

Sirer, Emin Gun

154

The Nevada railroad system: Physical, operational, and accident characteristics  

SciTech Connect (OSTI)

This report provides a description of the operational and physical characteristics of the Nevada railroad system. To understand the dynamics of the rail system, one must consider the system`s physical characteristics, routing, uses, interactions with other systems, and unique operational characteristics, if any. This report is presented in two parts. The first part is a narrative description of all mainlines and major branchlines of the Nevada railroad system. Each Nevada rail route is described, including the route`s physical characteristics, traffic type and volume, track conditions, and history. The second part of this study provides a more detailed analysis of Nevada railroad accident characteristics than was presented in the Preliminary Nevada Transportation Accident Characterization Study (DOE, 1990).

NONE

1991-09-01T23:59:59.000Z

155

An operational and institutional modular analysis framework of Transmission and System Operator  

E-Print Network [OSTI]

to internalise network externality in energy price. The nodal pricing is in theory the most efficient method since the power flows externality is internalised in the energy market. It gives an energy price per PLUMEL Energy Department at Supelec Abstract Transmission and System Operator (TSO) is the power flows

Paris-Sud XI, Université de

156

Use of oil-emulsion mud in the Sivells Bend Field: Gas and gas condensate operations for the independent producer.  

E-Print Network [OSTI]

during drilling operations. Early in thc life of the Sivells Bend ficl&1, it became apparent that it would follow thc typical pattern of other Straivn saml fiiel&ls, 2nd in an effort to effect l&atter &veil completions, it ivas dcculcd to iisc... of the drilling crews toward its use, It was more difficult to keep the equipment clean, it increase&1 their work to some degree aml it ivas g something nelv. Hoivcver, after thc first few wells, the crews hsd become more familiar with its use...

Echols, Walter Harlan

1954-01-01T23:59:59.000Z

157

Ancillary Services in the United States: Independent System Operator (ISO) Perspective (Presentation)  

SciTech Connect (OSTI)

The presentation provides an overview of how increasing penetrations of variable renewable energy on the electricity grid are impacting ancillary services markets in the United States.

Cochran, J.

2013-05-01T23:59:59.000Z

158

On the Efficiency of the New York Independent System Operator Market for Transmission  

E-Print Network [OSTI]

947208061, USA.; Emily S. Bartholomew, Senior Research Associate, Electricity Market Studies, Environmental-8061, USA, Chris Marnay, Staff Scientist, Electricity Market Studies, Environmental Energy Technologies of California, Berkeley, CA 94720, USA. Abstract The physical nature of electricity generation and delivery

159

EA-227 New York Independent System Operator Inc | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1 Closing American Electric Power80 NRG PowerA57 New

160

New York Independent System Operator, Smart Grid RFI: Addressing Policy and  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy HealthCommentsAugustNationalMarketsMillion DOEEnergy WorkingPower Grid

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

EA-227-A New York Independent System Operator | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat Pump Models |Conduct,Final9: DraftPlant, Amarillo, Texas |2:12-C Coral

162

MinISO: A Minimal Independent System Operator Pravin Varaiya and Felix Wu  

E-Print Network [OSTI]

maintenance, service quality assurance, and promotion of economic e ciency and equity. To achieve these objectives the ISO may be au- thorized to set the rules for transactions between sup- pliers and consumers

163

Implementation and commissioning of an integrated micro-CT/RT system with computerized independent jaw collimation  

SciTech Connect (OSTI)

Purpose: To design, construct, and commission a set of computer-controlled motorized jaws for a micro-CT/RT system to perform conformal image-guided small animal radiotherapy.Methods: The authors designed and evaluated a system of custom-built motorized orthogonal jaws, which allows the delivery of off-axis rectangular fields on a GE eXplore CT 120 preclinical imaging system. The jaws in the x direction are independently driven, while the y-direction jaws are symmetric. All motors have backup encoders, verifying jaw positions. Mechanical performance of the jaws was characterized. Square beam profiles ranging from 2 2 to 60 60 mm{sup 2} were measured using EBT2 film in the center of a 70 70 22 mm{sup 3} solid water block. Similarly, absolute depth dose was measured in a solid water and EBT2 film stack 50 50 50 mm{sup 3}. A calibrated Farmer ion chamber in a 70 70 20 mm{sup 3} solid water block was used to measure the output of three field sizes: 50 50, 40 40, and 30 30 mm{sup 2}. Elliptical target plans were delivered to films to assess overall system performance. Respiratory-gated treatment was implemented on the system and initially proved using a simple sinusoidal motion phantom. All films were scanned on a flatbed scanner (Epson 1000XL) and converted to dose using a fitted calibration curve. A Monte Carlo beam model of the micro-CT with the jaws has been created using BEAMnrc for comparison with the measurements. An example image-guided partial lung irradiation in a rat is demonstrated.Results: The averaged random error of positioning each jaw is less than 0.1 mm. Relative output factors measured with the ion chamber agree with Monte Carlo simulations within 2%. Beam profiles and absolute depth dose curves measured from the films agree with simulations within measurement uncertainty. Respiratory-gated treatments applied to a phantom moving with a peak-to-peak amplitude of 5 mm showed improved beam penumbra (80%20%) from 3.9 to 0.8 mm.Conclusions: A set of computer-controlled motorized jaws for a micro-CT/RT system were constructed with position reliably better than a tenth of a millimeter. The hardware system is ready for image-guided conformal radiotherapy for small animals with capability of respiratory-gated delivery.

Jensen, Michael D. [Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada)] [Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Hrinivich, W. Thomas; Jung, Jongho A. [Department of Physics and Astronomy, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada)] [Department of Physics and Astronomy, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Holdsworth, David W. [Imaging Research Laboratories, Robarts Research Institute, 100 Perth Drive, London, Ontario N6A 5K8 (Canada) [Imaging Research Laboratories, Robarts Research Institute, 100 Perth Drive, London, Ontario N6A 5K8 (Canada); Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Department of Surgery, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Drangova, Maria [Imaging Research Laboratories, Robarts Research Institute, 100 Perth Drive, London, Ontario N6A 5K8, Canada and Department of Medical Biophysics, The University of Western Ontario 1151 Richmond Street, London, Ontario N6A 3K7 (Canada)] [Imaging Research Laboratories, Robarts Research Institute, 100 Perth Drive, London, Ontario N6A 5K8, Canada and Department of Medical Biophysics, The University of Western Ontario 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Chen, Jeff [Department of Physics and Engineering, London Regional Cancer Program, London Health Sciences Centre, 800 Commissioners Road East, London, Ontario N6A 5W9 (Canada) [Department of Physics and Engineering, London Regional Cancer Program, London Health Sciences Centre, 800 Commissioners Road East, London, Ontario N6A 5W9 (Canada); Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Department of Oncology, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Wong, Eugene [Department of Physics and Astronomy, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada) [Department of Physics and Astronomy, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Department of Oncology, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Department of Physics and Engineering, London Regional Cancer Program, London Health Sciences Centre, 800 Commissioners Road East, London, Ontario N6A 5W9 (Canada)

2013-08-15T23:59:59.000Z

164

Method for operating a combustor in a fuel cell system  

DOE Patents [OSTI]

In one aspect, the invention provides a method of operating a combustor to heat a fuel processor to a desired temperature in a fuel cell system, wherein the fuel processor generates hydrogen (H.sub.2) from a hydrocarbon for reaction within a fuel cell to generate electricity. More particularly, the invention provides a method and select system design features which cooperate to provide a start up mode of operation and a smooth transition from start-up of the combustor and fuel processor to a running mode.

Clingerman, Bruce J. (Palmyra, NY); Mowery, Kenneth D. (Noblesville, IN)

2002-01-01T23:59:59.000Z

165

The Initial Development of a Computerized Operator Support System  

SciTech Connect (OSTI)

A computerized operator support system (COSS) is a collection of resilient software technologies to assist operators in monitoring overall nuclear power plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast- moving, complex events. A prototype COSS for a chemical volume control system at a nuclear power plant has been developed in order to demonstrate the concept and provide a test bed for further research. The development process identified four underlying elements necessary for the prototype, which consist of a digital alarm system, computer-based procedures, piping and instrumentation diagram system representations, and a recommender module for mitigation actions. An operational prototype resides at the Idaho National Laboratory (INL) using the U.S. Department of Energys (DOE) Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). Several human-machine interface (HMI) considerations are identified and incorporated in the prototype during this initial round of development.

Roger Lew; Ronald L Boring; Thomas A Ulrich; Ken Thomas

2014-08-01T23:59:59.000Z

166

SYSTEM PLANNING WITH THE HANFORD WASTE OPERATIONS SIMULATOR  

SciTech Connect (OSTI)

At the U. S. Department of Energy's Hanford Site in southeastern Washington State, 216 million liters (57 million gallons) of nuclear waste is currently stored in aging underground tanks, threatening the Columbia River. The River Protection Project (RPP), a fully integrated system of waste storage, retrieval, treatment, and disposal facilities, is in varying stages of design, construction, operation, and future planning. These facilities face many overlapping technical, regulatory, and financial hurdles to achieve site cleanup and closure. Program execution is ongoing, but completion is currently expected to take approximately 40 more years. Strategic planning for the treatment of Hanford tank waste is by nature a multi-faceted, complex and iterative process. To help manage the planning, a report referred to as the RPP System Plan is prepared to provide a basis for aligning the program scope with the cost and schedule, from upper-tier contracts to individual facility operating plans. The Hanford Tank Waste Operations Simulator (HTWOS), a dynamic flowsheet simulation and mass balance computer model, is used to simulate the current planned RPP mission, evaluate the impacts of changes to the mission, and assist in planning near-term facility operations. Development of additional modeling tools, including an operations research model and a cost model, will further improve long-term planning confidence. The most recent RPP System Plan, Revision 4, was published in September 2009.

CRAWFORD TW; CERTA PJ; WELLS MN

2010-01-14T23:59:59.000Z

167

Independent Safety Assessment of the TOPAZ-II space nuclear reactor power system (Revised)  

SciTech Connect (OSTI)

The Independent Safety Assessment described in this study report was performed to assess the safety of the design and launch plans anticipated by the U.S. Department of Defense (DOD) in 1993 for a Russian-built, U.S.-modified, TOPAZ-II space nuclear reactor power system. Its conclusions, and the bases for them, were intended to provide guidance for the U.S. Department of Energy (DOE) management in the event that the DOD requested authorization under section 91b. of the Atomic Energy Act of 1954, as amended, for possession and use (including ground testing and launch) of a nuclear-fueled, modified TOPAZ-II. The scientists and engineers who were engaged to perform this assessment are nationally-known nuclear safety experts in various disciplines. They met with participants in the TOPAZ-II program during the spring and summer of 1993 and produced a report based on their analysis of the proposed TOPAZ-II mission. Their conclusions were confined to the potential impact on public safety and did not include budgetary, reliability, or risk-benefit analyses.

NONE

1993-09-01T23:59:59.000Z

168

Using Energy Management Control Systems for HVAC Operational Diagnostics  

E-Print Network [OSTI]

USING ENERGY MANAGEMENT CONTROL SYSTEMS FOR HVAC OPERATIONAL DIAGNOSTICS Karl Stum, P.E. Portland Energy Conservation, Inc. 92 1 SW Washington, Suite 3 12 Portland, OR 97205 503-248-4636 Fax 503-295-0820 ABSTRACT The power and flexibility... Proceedings, June 1997. Meyers, S.; E. Mills; A. Chen; L. Demsetz "Building Data Visualization for Diagnostics," ASHRAE Journal, June 1996. PECl (Portland Energy Conservation, Inc.). Energy Management C0ntrof Systems-A Practical Guiak, 1997. Sparks, R...

Stum, K.

1998-01-01T23:59:59.000Z

169

Cold weather hydrogen generation system and method of operation  

DOE Patents [OSTI]

A system for providing hydrogen gas is provided. The system includes a hydrogen generator that produces gas from water. One or more heat generation devices are arranged to provide heating of the enclosure during different modes of operation to prevent freezing of components. A plurality of temperature sensors are arranged and coupled to a controller to selectively activate a heat source if the temperature of the component is less than a predetermined temperature.

Dreier, Ken Wayne (Madison, CT); Kowalski, Michael Thomas (Seymour, CT); Porter, Stephen Charles (Burlington, CT); Chow, Oscar Ken (Simsbury, CT); Borland, Nicholas Paul (Montpelier, VT); Goyette, Stephen Arthur (New Hartford, CT)

2010-12-14T23:59:59.000Z

170

Results of Inspections of Operation of the ORNL Mock Feed/Withdrawal System  

SciTech Connect (OSTI)

Remote monitoring of process activities is one tool under consideration by the International Atomic Energy Agency (IAEA) to handle increasing demands for conducting verification inspections at safeguarded facilities. The ability for the IAEA to continuously monitor feed and withdrawal (F&W) station operations (e.g., load cells and other process attributes) would provide independent verification of normal plant operations, supply data that would make safeguards more effective and efficient, and enable information-driven inspections. Researchers at Oak Ridge National Laboratory (ORNL) have assembled a mock UF6 F&W system using water in lieu of UF6 to test the feasibility of advanced process monitoring systems and concepts (such as remote monitoring) for safeguards. One use of the F&W mockup involves exploring how a safeguards inspector would interact with the data and use it to perform onsite inspections more effectively, so the researchers divided staff into two groups: operators and inspectors. This paper will discuss this process and the promising results of the inspections that have been performed at the mock facility to verify operator declarations and detect material diversion. This paper also will present the intuitive and user-friendly graphic interface researchers used to analyze the information. Although the data gathered previously came from a computer local to the F&W system, future work will include remote transmission and analysis of the data.

White-Horton, Jessica L [ORNL; Laughter, Mark D [ORNL; Krichinsky, Alan M [ORNL

2010-01-01T23:59:59.000Z

171

Fuzzy logic based operated device identification in power distribution systems  

E-Print Network [OSTI]

of an operated device identification algorithm to be used as one of four modules in an automated modular scheme for fault section estimation on radial distribution systems. This algorithm will be executed in tandem with the other fault location modules that form...

Manivannan, Karthick Muthu

2002-01-01T23:59:59.000Z

172

Century Electric Distribution System Operations Lorenzo Kristov,1  

E-Print Network [OSTI]

May 2014 1 21st Century Electric Distribution System Operations Lorenzo Kristov,1 California adoption of distribution energy technologies. All of this has occurred during a period of increasing of Renewable and Distributed Energy Resources, Caltech Resnick Institute, 2012 #12;May 2014 2 and wholesale

Low, Steven H.

173

Interface Between Engineering and Market Operations in Restructured Electricity Systems  

E-Print Network [OSTI]

. Sobajic was with the Electric Power Research Institute, Palo Alto, CA 94304 USA. He is now with GridInterface Between Engineering and Market Operations in Restructured Electricity Systems HUNG began in 1998 in the United States Keywords--Electricity restructuring, market design, market op

Oren, Shmuel S.

174

Interface between Engineering and Market Operations in Restructured Electricity Systems  

E-Print Network [OSTI]

is with the Electric Power Research Institute, Palo Alto, CA USA (e-mail: hchaO@epri.com) S. Oren is with the IEOR@eccointl.com) D. Sobajic was with the Electric Power Research Institute, Palo Alto, CA. USA. He is now with Grid1 Interface between Engineering and Market Operations in Restructured Electricity Systems Hung

175

Operation and Control of Full Ice-storage System  

E-Print Network [OSTI]

In a dividing time ice-storage system, the refrigerator does not operate during power's on-peak period, and all the cooling is supplied by the ice stored in off-peak period, so that the use of electricity can be maintained. When the ice is thawing...

Liu, Q.; Liu, Y.

2006-01-01T23:59:59.000Z

176

Hanford Environmental Information System (HEIS) Operator`s Manual. Volume 1  

SciTech Connect (OSTI)

The Hanford Environmental Information System (HEIS) is a consolidated set of automated resources that effectively manage the data gathered during environmental monitoring and restoration of the Hanford Site. The HEIS includes an integrated database that provides consistent and current data to all users and promotes sharing of data by the entire user community. This manual describes the facilities available to the operational user who is responsible for data entry, processing, scheduling, reporting, and quality assurance. A companion manual, the HEIS User`s Manual, describes the facilities available-to the scientist, engineer, or manager who uses the system for environmental monitoring, assessment, and restoration planning; and to the regulator who is responsible for reviewing Hanford Site operations against regulatory requirements and guidelines.

Schreck, R.I.

1991-10-01T23:59:59.000Z

177

WRAP 1, operational test report 80X non-destructive examination system  

SciTech Connect (OSTI)

This Operational Test Report was performed to verify the WRAP 1 Facility 80X Non-Destructive Examination systems operate in accordance with the system designs and specifications.

Bottenus, R.J.

1997-04-14T23:59:59.000Z

178

Implementation and operation of VAX-based data acquisition system for the large coil task  

SciTech Connect (OSTI)

The VAX-based data acquisition system for the International Fusion Superconducting Magnet Test Facility (IFSMTF) at Oak Ridge National Laboratory (ORNL) is a second generation system that evolved from a PDP-11/60-based system used in the two-coil test and facility shakedown. The VAX 11/780 processor has been interfaced through a CAMAC fiber-optic byte serial highway to five existing LSI-11/23 frontend processors through dataway access port (DAP) modules. The VAX CAMAC interface has permitted the addition of analog input channels for the refrigeration system and analog and digital outputs to drive display devices. Software utilities are provided to operate the data acquisition hardware, maintain data base files, and display data. Graphical display of data is accomplished through the use of VAX IDL (Interactive Data Language), which provides device-independent data presentation. Output from IDL is available for Tektronix displays and has been extended to generate TKF and Versaplot graphics metafiles for hardcopy output to Versatec printer/plotters. In addition, a Sension display system is available for graphical display of real-time data in the form of strip chart and tabular displays. This paper describes the hardware and software design of the system and the operation of the system during the full-array testing sequence.

Baylor, L.R.; Blair, E.T.; Greenwood, D.E.; Munro, J.K.

1985-01-01T23:59:59.000Z

179

HEMP emergency planning and operating procedures for electric power systems  

SciTech Connect (OSTI)

Investigations of the impact of high-altitude electromagnetic pulse (HEMP) on electric power systems and electrical equipment have revealed that HEMP creates both misoperation and failures. These events result from both the early time E[sub 1] (steep-front pulse) component and the late time E[sub 3] (geomagnetic perturbations) component of HEMP. In this report a HEMP event is viewed in terms of its marginal impact over classical power system disturbances by considering the unique properties and consequences of HEMP. This report focuses on system-wide electrical component failures and their potential consequences from HEMP. In particular, the effectiveness of planning and operating procedures for electric systems is evaluated while under the influence of HEMP. This assessment relies on published data and characterizes utilities using the North American Electric Reliability Council's regions and guidelines to model electric power system planning and operations. Key issues addressed by the report include how electric power systems are affected by HEMP and what actions electric utilities can initiate to reduce the consequences of HEMP. The report also reviews the salient features of earlier HEMP studies and projects, examines technology trends in the electric power industry which are affected by HEMP, characterizes the vulnerability of power systems to HEMP, and explores the capability of electric systems to recover from a HEMP event.

Reddoch, T.W.; Markel, L.C. (Electrotek Concepts, Inc., Knoxville, TN (United States))

1991-01-01T23:59:59.000Z

180

Feasibility study for a transportation operations system cask maintenance facility  

SciTech Connect (OSTI)

The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs.

Rennich, M.J.; Medley, L.G.; Attaway, C.R.

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

System for controlling the operating temperature of a fuel cell  

DOE Patents [OSTI]

A method and system are provided for improved control of the operating temperature of a fuel cell (32) utilizing an improved temperature control system (30) that varies the flow rate of inlet air entering the fuel cell (32) in response to changes in the operating temperature of the fuel cell (32). Consistent with the invention an improved temperature control system (30) is provided that includes a controller (37) that receives an indication of the temperature of the inlet air from a temperature sensor (39) and varies the heat output by at least one heat source (34, 36) to maintain the temperature of the inlet air at a set-point Tinset. The controller (37) also receives an indication of the operating temperature of the fuel cell (32) and varies the flow output by an adjustable air mover (33), within a predetermined range around a set-point Fset, in order to maintain the operating temperature of the fuel cell (32) at a set-point Topset.

Fabis, Thomas R.; Makiel, Joseph M.; Veyo, Stephen E.

2006-06-06T23:59:59.000Z

182

Electric Bike Sharing--System Requirements and Operational Concepts  

SciTech Connect (OSTI)

Bike sharing is an exciting new model of public-private transportation provision that has quickly emerged in the past five years. Technological advances have overcome hurdles of early systems and cities throughout the globe are adopting this model of transportation service. Electric bikes have simultaneously gained popularity in many regions of the world and some have suggested that shared electric bikes could provide an even higher level of service compared to existing systems. There are several challenges that are unique to shared electric bikes: electric-assisted range, recharging protocol, and bike and battery checkout procedures. This paper outlines system requirements to successfully develop and deploy an electric bike sharing system, focusing on system architecture, operational concepts, and battery management. Although there is little empirical evidence, electric bike sharing could be feasible, depending on demand and battery management, and can potentially improve the utility of existing bike sharing systems. Under most documented bike sharing use scenarios, electric bike battery capacity is insufficient for a full day of operation, depending on recharging protocol. Off-board battery management is a promising solution to address this problem. Off-board battery management can also support solar recharging. Future pilot tests will be important and allow empirical evaluation of electric bikesharing system performance. (auth)

Cherry, Christopher; Worley, Stacy; Jordan, David

2010-08-01T23:59:59.000Z

183

Operation of dry-cleaned and agglomerated precompaction system (DAPS)  

SciTech Connect (OSTI)

In order to reduce the manufacturing cost of coke, it is necessary to reduce mainly (1) the material cost and (2) operating cost. Both of these costs can be reduced by lowering the moisture of charging coal. Because dust generation increases with decreasing moisture of charging coal, however, the lower limit of charging coal moisture in the existing coke-oven equipment was about 5%, which yielded good results in coal moisture control (CMC) equipment. Nippon Steel has furthered the development of techniques for lowering the moisture of charging coal as far as possible in the existing coke ovens and has recently succeeded in developing a dry-cleaned and agglomerated precompaction system (DAPS) and incorporating this system in commercial production equipment. In this system, a coal preparation process is undertaken that involves separating coal fines, which cause dust generation, from dried charging coal and agglomerating them. The equipment incorporating this system was installed in the No. 3 and No. 4 coke batteries at Oita Works and brought into full-scale operation in September 1992. The equipment has since been operating smoothly.

Tanaka, Shigemi; Okanishi, Kazuya; Kikuchi, Akio; Yamamura, Yuichi

1997-12-31T23:59:59.000Z

184

1?10 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review  

SciTech Connect (OSTI)

This independent review examines the status and technical potential of 1-10 kW stationary combined heat and power fuel cell systems and analyzes the achievability of the DOE cost, efficiency, and durability targets for 2012, 2015, and 2020.

Maru, H. C.; Singhal, S. C.; Stone, C.; Wheeler, D.

2010-11-01T23:59:59.000Z

185

110 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review  

Broader source: Energy.gov [DOE]

This independent review examines the status and technical potential of 1-10 kW stationary combined heat and power fuel cell systems and analyzes the achievability of the DOE cost, efficiency, and durability targets for 2012, 2015, and 2020.

186

More Than 410,000 Hours of Real-World Fuel Cell System Operation Have Been Analyzed by NREL's Technology Validation Team (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet discusses how researchers at the National Renewable Energy Laboratory (NREL) are working to validate hydrogen and fuel cell systems in real-world settings. NREL strives to provide an independent third-party technology assessment that focuses on fuel cell system and hydrogen infrastructure performance, operation, maintenance, and safety.

Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.

2011-02-01T23:59:59.000Z

187

Optimum Operation of In-Plant Cogeneration Systems  

E-Print Network [OSTI]

which plant simulation model and a mathematical optimization package can determine the optimum settings for control variables of the power plant and eliminate uncertainties associated with achieving the minimum cost operation. TENSA Services.... The systems have been developed over a 20 year period culminating with real time data collection and performance monitoring and real time optimization for a variety of plants, including heat and power cogeneration plants. ICI has found that they have...

Craw, I. A.; Foster, D.; Reidy, K. D.

188

Eliciting Safety Policy and Balancing with Operational Fitness in Systems of Systems  

E-Print Network [OSTI]

Eliciting Safety Policy and Balancing with Operational Fitness in Systems of Systems Georgios Despotou High Integrity Systems Group Department of Computer Science University of York York, UK george@cs.york.ac.uk Martin Hall-May High Integrity Systems Group Department of Computer Science University of York York, UK

Kelly, Tim

189

DAS: a data management system for instrument tests and operations  

E-Print Network [OSTI]

The Data Access System (DAS) is a metadata and data management software system, providing a reusable solution for the storage of data acquired both from telescopes and auxiliary data sources during the instrument development phases and operations. It is part of the Customizable Instrument WorkStation system (CIWS-FW), a framework for the storage, processing and quick-look at the data acquired from scientific instruments. The DAS provides a data access layer mainly targeted to software applications: quick-look displays, pre-processing pipelines and scientific workflows. It is logically organized in three main components: an intuitive and compact Data Definition Language (DAS DDL) in XML format, aimed for user-defined data types; an Application Programming Interface (DAS API), automatically adding classes and methods supporting the DDL data types, and providing an object-oriented query language; a data management component, which maps the metadata of the DDL data types in a relational Data Base Management Syste...

Frailis, Marco; Zacchei, Andrea; Lodi, Marcello; Cirami, Roberto; Pasian, Fabio; Trifoglio, Massimo; Bulgarelli, Andrea; Gianotti, Fulvio; Franceschi, Enrico; Nicastro, Luciano; Conforti, Vito; Zoli, Andrea; Smart, Ricky; Morbidelli, Roberto; Dadina, Mauro

2014-01-01T23:59:59.000Z

190

MACHINE PROTECTION SYSTEM FOR CONCURRENT OPERATION OF RHIC AND BLIP.  

SciTech Connect (OSTI)

The Brookhaven 200MeV linac is a multipurpose machine used to inject low intensity polarized protons for RHIC (Relativistic Heavy Ion Collider), as well as to inject high intensity protons to BLIP (Brookhaven Linac Isotope Producer), a medical isotope production facility. If high intensity protons were injected to RHIC by mistake, administrative radiation limits could be exceeded or sensitive electronics could be damaged. In the past, the changeover from polarized proton to high intensity proton operation has been a lengthy process, thereby never allowing the two programs to run simultaneously. To remedy this situation and allow concurrent operation of RHIC and BLIP, an active interlock system has been designed to monitor current levels in the AGS using two current transformers with fail safe circuitry and associated electronics to inhibit beam to RHIC if high intensity currents are detected.

WILINSKI, M.; BELLAVIA, S.; GLENN, J.W.; MAUSNER, L.F.; UNGER, K.L.

2005-05-16T23:59:59.000Z

191

THE PREV AIR SYSTEM, AN OPERATIONAL SYSTEM FOR LARGE SCALE AIR QUALITY FORECASTS OVER EUROPE; APPLICATIONS  

E-Print Network [OSTI]

THE PREV AIR SYSTEM, AN OPERATIONAL SYSTEM FOR LARGE SCALE AIR QUALITY FORECASTS OVER EUROPE Author ABSTRACT Since Summer 2003, the PREV'AIR system has been delivering through the Internet1 daily air quality forecasts over Europe. This is the visible part of a wider collaborative project

Paris-Sud XI, Université de

192

Operation of the Upgraded ATLAS Level-1 Central Trigger System  

E-Print Network [OSTI]

The ATLAS Level-1 Central Trigger (L1CT) system is a central part of ATLAS data-taking and has undergone a major upgrade for Run 2 of the LHC, in order to cope with the expected increase of instantaneous luminosity of a factor of 2 with respect to Run 1. The upgraded hardware offers more flexibility in the trigger decisions due to the double amount of trigger inputs and usable trigger channels. It also provides an interface to the new topological trigger system. Operationally - particularly useful for commissioning, calibration and test runs - it allows concurrent running of up to 3 different sub-detector combinations. In this contribution, we give an overview of the operational software framework of the L1CT system with particular emphasis of the configuration, controls and monitoring aspects. The software framework allows a consistent configuration with respect to the ATLAS experiment and the LHC machine, upstream and downstream trigger processors, and the data acquisition. Trigger and dead-time rates are m...

Glatzer, Julian Maximilian Volker; The ATLAS collaboration

2015-01-01T23:59:59.000Z

193

The design and implementation of an operational model evaluation system  

SciTech Connect (OSTI)

An evaluation of an atmospheric transport and diffusion model`s operational performance typically involves the comparison of the model`s calculations with measurements of an atmospheric pollutant`s temporal and spatial distribution. These evaluations however often use data from a small number of experiments and may be limited to producing some of the commonly quoted statistics based on the differences between model calculations and the measurements. This paper presents efforts to develop a model evaluation system geared for both the objective statistical analysis and the more subjective visualization of the inter-relationships between a model`s calculations and the appropriate field measurement data.

Foster, K.T.

1995-06-01T23:59:59.000Z

194

Correlation of free-response and receiver-operating-characteristic area-under-the-curve estimates: Results from independently conducted FROC/ROC studies in mammography  

SciTech Connect (OSTI)

Purpose: From independently conducted free-response receiver operating characteristic (FROC) and receiver operating characteristic (ROC) experiments, to study fixed-reader associations between three estimators: the area under the alternative FROC (AFROC) curve computed from FROC data, the area under the ROC curve computed from FROC highest rating data, and the area under the ROC curve computed from confidence-of-disease ratings. Methods: Two hundred mammograms, 100 of which were abnormal, were processed by two image-processing algorithms and interpreted by four radiologists under the FROC paradigm. From the FROC data, inferred-ROC data were derived, using the highest rating assumption. Eighteen months afterwards, the images were interpreted by the same radiologists under the conventional ROC paradigm; conventional-ROC data (in contrast to inferred-ROC data) were obtained. FROC and ROC (inferred, conventional) data were analyzed using the nonparametric area-under-the-curve (AUC), (AFROC and ROC curve, respectively). Pearson correlation was used to quantify the degree of association between the modality-specific AUC indices and standard errors were computed using the bootstrap-after-bootstrap method. The magnitude of the correlations was assessed by comparison with computed Obuchowski-Rockette fixed reader correlations. Results: Average Pearson correlations (with 95% confidence intervals in square brackets) were: Corr(FROC, inferred ROC) = 0.76[0.64, 0.84] > Corr(inferred ROC, conventional ROC) = 0.40[0.18, 0.58] > Corr (FROC, conventional ROC) = 0.32[0.16, 0.46]. Conclusions: Correlation between FROC and inferred-ROC data AUC estimates was high. Correlation between inferred- and conventional-ROC AUC was similar to the correlation between two modalities for a single reader using one estimation method, suggesting that the highest rating assumption might be questionable.

Zanca, Federica; Hillis, Stephen L.; Claus, Filip; Van Ongeval, Chantal; Celis, Valerie; Provoost, Veerle; Yoon, Hong-Jun; Bosmans, Hilde [Department of Radiology, University Hospitals Leuven, 3000 Leuven (Belgium); Departments of Radiology and Biostatistics, University of Iowa, Iowa City, Iowa 52242-1077 and Comprehensive Access and Delivery Research and Evaluation (CADRE) Center, Iowa City VA Health Care System, Iowa City, Iowa 52246-2208 (United States); Department of Radiology, University Hospitals Leuven, 3000 Leuven (Belgium); Department of Radiology, University of Pittsburgh, Pittsburgh, Pennsylvania 15213 (United States); Department of Radiology, University Hospitals Leuven, 3000 Leuven (Belgium)

2012-10-15T23:59:59.000Z

195

Smart Infrared Inspection System Field Operational Test Final Report  

SciTech Connect (OSTI)

The Smart InfraRed Inspection System (SIRIS) is a tool designed to assist inspectors in determining which vehicles passing through the SIRIS system are in need of further inspection by measuring the thermal data from the wheel components. As a vehicle enters the system, infrared cameras on the road measure temperatures of the brakes, tires, and wheel bearings on both wheel ends of commercial motor vehicles (CMVs) in motion. This thermal data is then presented to enforcement personal inside of the inspection station on a user friendly interface. Vehicles that are suspected to have a violation are automatically alerted to the enforcement staff. The main goal of the SIRIS field operational test (FOT) was to collect data to evaluate the performance of the prototype system and determine the viability of such a system being used for commercial motor vehicle enforcement. From March 2010 to September 2010, ORNL facilitated the SIRIS FOT at the Greene County Inspection Station (IS) in Greeneville, Tennessee. During the course of the FOT, 413 CMVs were given a North American Standard (NAS) Level-1 inspection. Of those 413 CMVs, 384 were subjected to a SIRIS screening. A total of 36 (9.38%) of the vehicles were flagged by SIRIS as having one or more thermal issues; with brakes issues making up 33 (91.67%) of those. Of the 36 vehicles flagged as having thermal issues, 31 (86.11%) were found to have a violation and 30 (83.33%) of those vehicles were placed out-of-service (OOS). Overall the enforcement personnel who have used SIRIS for screening purposes have had positive feedback on the potential of SIRIS. With improvements in detection algorithms and stability, the system will be beneficial to the CMV enforcement community and increase overall trooper productivity by accurately identifying a higher percentage of CMVs to be placed OOS with minimal error. No future evaluation of SIRIS has been deemed necessary and specifications for a production system will soon be drafted.

Siekmann, Adam [ORNL; Capps, Gary J [ORNL; Franzese, Oscar [ORNL; Lascurain, Mary Beth [ORNL

2011-06-01T23:59:59.000Z

196

An acquisition system based on a network of microvax's running the realtime DEC VAXELN operating system  

SciTech Connect (OSTI)

The authors describe an acquisition system based on a network (Ethernet/DECNET) of MicroVAX's running in the VAXELN environment. VAXELN is a Digital Equipment software product for the development of dedicated, real time systems for VAX processors. A central VAX running under the VAX/VMS operating system is used as file server and as an interface of the acquisition system with respect to the user's world.

D'Antone, I.; Mandrioli, G.; Matteuzzi, P.; Sanzani, G. (Bologna Univ. (Italy). Dipt. di Fisica); Bloise, C.; Grillo, A.F.; Marini, A.; Ronga, F. (INFN Laboratori Nazionali di Frascati, C.P.13, 00044 Frascati (IT)); Baldini, A. (Via Livornese, San Piero a Grado, 56100 Pisa (IT)); Mancarella, G.; Palamara, O.; Surdo, A. (Lecce Univ. (Italy). Ist. di Fisica)

1989-10-01T23:59:59.000Z

197

An Operator Perspective from a Facility Evaluation of an RFID-Based UF6 Cylinder Accounting and Tracking System  

SciTech Connect (OSTI)

An operational field test of a Radio-Frequency Identification (RFID) system for tracking and accounting UF6 cylinders was conducted at the Global Nuclear Fuel Americas (GNF) fuel fabrication plant in 2009. The Cylinder Accountability and Tracking System (CATS) was designed and deployed by Oak Ridge National Laboratory (ORNL) and evaluated in cooperation with GNF. The system required that passive RFID be attached to several UF6 30B cylinders as they were received at the site; then the cylinders were tracked as they proceeded to interim storage, to processing in an autoclave, and eventually to disposition from the site. This CATS deployment also provided a direct integration of scale data from the site accountability scales. The integration of this information into the tracking data provided an attribute for additional safeguards for evaluation. The field test provided insight into the advantages and challenges of using RFID at an operating nuclear facility. The RFID system allowed operators to interact with the technology and demonstrated the survivability of the tags and reader equipment in the process environment. This paper will provide the operator perspective on utilizing RFID technology for locating cylinders within the facility, thereby tracking the cylinders for process and for Material Control & Accounting functions. The paper also will present the operator viewpoint on RFID implemented as an independent safeguards system.

Martyn, Rose [Global Nuclear Fuels; Fitzgerald, Peter [Global Nuclear Fuels; Stehle, Nicholas D [ORNL; Rowe, Nathan C [ORNL; Younkin, James R [ORNL

2011-01-01T23:59:59.000Z

198

Method and system for operating an electric motor  

DOE Patents [OSTI]

Methods and systems for operating an electric motor having a plurality of windings with an inverter having a plurality of switches coupled to a voltage source are provided. A first plurality of switching vectors is applied to the plurality of switches. The first plurality of switching vectors includes a first ratio of first magnitude switching vectors to second magnitude switching vectors. A direct current (DC) current associated with the voltage source is monitored during the applying of the first plurality of switching vectors to the plurality of switches. A second ratio of the first magnitude switching vectors to the second magnitude switching vectors is selected based on the monitoring of the DC current associated with the voltage source. A second plurality of switching vectors is applied to the plurality of switches. The second plurality of switching vectors includes the second ratio of the first magnitude switching vectors to the second magnitude switching vectors.

Gallegos-Lopez, Gabriel; Hiti, Silva; Perisic, Milun

2013-01-22T23:59:59.000Z

199

Method for operating a combustor in a fuel cell system  

DOE Patents [OSTI]

A method of operating a combustor to heat a fuel processor in a fuel cell system, in which the fuel processor generates a hydrogen-rich stream a portion of which is consumed in a fuel cell stack and a portion of which is discharged from the fuel cell stack and supplied to the combustor, and wherein first and second streams are supplied to the combustor, the first stream being a hydrocarbon fuel stream and the second stream consisting of said hydrogen-rich stream, the method comprising the steps of monitoring the temperature of the fuel processor; regulating the quantity of the first stream to the combustor according to the temperature of the fuel processor; and comparing said quantity of said first stream to a predetermined value or range of predetermined values.

Chalfant, Robert W. (West Henrietta, NY); Clingerman, Bruce J. (Palmyra, NY)

2002-01-01T23:59:59.000Z

200

Analysis, testing, and operation of the MAGI thermal control system  

SciTech Connect (OSTI)

The Aerospace Corporation has completed the development of the Mineral and Gas Identifier (MAGI) sensor - an airborne multi-spectral infrared instrument that is designed to discriminate surface composition and to detect gas emissions from the environment. Sensor performance was demonstrated in a series of flights aboard a Twin Otter aircraft in December 2011 as a stepping stone to a future satellite sensor design. To meet sensor performance requirements the thermal control system was designed to operate the HgCdTe focal plane array (FPA) at 50 K with a 1.79 W heat rejection load to a 44.7 K sink and the optical assembly at 100 K with a 7.5 W heat load to a 82.3 K sink. Two commercial off-theshelf (COTS) Sunpower Stirling cryocoolers were used to meet the instruments cooling requirements. A thermal model constructed in Thermal Desktop was used to run parametric studies that guided the mechanical design and sized the two cryocoolers. This paper discusses the development, validation, and operation of the MAGI thermal control system. Detailed energy balances and temperature predictions are presented for various test cases to demonstrate the utility and accuracy of the thermal model. Model inputs included measured values of heat lift as a function of input power and cold tip temperature for the two cryocoolers. These measurements were also used to make predictions of the cool-down behavior from ambient conditions. Advanced heater software was developed to meet unique requirements for both sensor cool-down rate and stability at the set point temperatures.

Yi, Sonny; Hall, Jeffrey L.; Kasper, Brian P. [The Aerospace Corporation, El Segundo, CA 90245 (United States)

2014-01-29T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

EMTP modeling of CIGRE benchmark based HVDC transmission system operating with weak AC systems  

SciTech Connect (OSTI)

An EMTP based study of a CIGRE benchmark based HVDC system operating with weak ac systems is carried out. The modeled system provides a starting point for (a) educators teaching HVDC transmission courses and (b) for utility planners to develop their own low-cost dedicated digital simulators for training purposes. In this paper, modeling details of the ac-dc system, dc converters and control are presented. To validate the control schemes presented, the HVDC system is tested under ac-dc fault conditions. Results obtained from an EMTP-based study under these fault conditions are also presented in this paper.

Sood, V.K. [Hydro-Quebec, Varennes, Quebec (Canada); Khatri, V.; Jin, H. [Concordia Univ., Montreal, Quebec (Canada). Dept. of Electrical and Computer Engineering

1995-12-31T23:59:59.000Z

202

0 20 4010 Miles NOAA Harmful Algal Bloom Operational Forecast System  

E-Print Network [OSTI]

0 20 4010 Miles NOAA Harmful Algal Bloom Operational Forecast System Texas Forecast Region Maps to Sargent BCH NOAA Harmful Algal Bloom Operational Forecast System Texas Forecast Region Maps 0 5 102 Bloom Operational Forecast System Texas Forecast Region Maps 0 5 102.5 Miles West Bay #12;Aransas Bay

203

TENSOR PRODUCTS OF OPERATOR SYSTEMS ALI KAVRUK, VERN I. PAULSEN, IVAN G. TODOROV, AND MARK TOMFORDE  

E-Print Network [OSTI]

TENSOR PRODUCTS OF OPERATOR SYSTEMS ALI KAVRUK, VERN I. PAULSEN, IVAN G. TODOROV, AND MARK TOMFORDE and study several tensor products on the cat- egory whose objects are operator systems and whose morphisms, and an asymmetric tensor product. We characterize the maximal operator system tensor product in terms of a universal

204

Operating System Concepts Silberschatz and Galvin 2004 revised by Wiseman12.1 File-System Structure  

E-Print Network [OSTI]

by Wiseman12.5 Linked Allocation Operating System Concepts Silberschatz and Galvin 2004 revised by Wiseman12Operating System Concepts Silberschatz and Galvin 2004 revised by Wiseman12.1 File allocation Operating System Concepts Silberschatz and Galvin 2004 revised by Wiseman12.2 Contiguous

Wiseman, Yair

205

Systems acceptance and operability testing for rotary mode core sampling in flammable gas tanks  

SciTech Connect (OSTI)

This document provides instructions for the system acceptance and operability testing of the rotary mode core sampling system, modified for use in flammable gas tanks.

Corbett, J.E., Westinghouse Hanford

1996-07-29T23:59:59.000Z

206

Independent Oversight Evaluation of Line Self-Assessments of...  

Broader source: Energy.gov (indexed) [DOE]

Independent Oversight Review, Los Alamos Site Office - March 2012 Independent Activity Report, Savannah River Operation - June 2010 Independent Activity Report, Livermore Site...

207

Priority-Independent Rewrite Systems for Pointer-based Data-Structures  

E-Print Network [OSTI]

Peltier January 2010 Abstract We define a syntactic class of graphs and graph rewrite systems for which we get f(1, [2, 1]) since after the evaluation of rev([1, 2]) the argument of length (i.e. the cell containing 1) becomes the last cell of the list. In [5] we have proposed to overcome this problem by ordering

Paris-Sud XI, Universit de

208

Independent Oversight Inspection of Environment, Safety, and Health Programs at the Savannah River Operations Office and Savannah River Site, January 2010  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) Office of Independent Oversight, within the Office of Health, Safety and Security (HSS), inspected environment, safety, and health (ES&H) programs at the DOE Savannah River Site.

209

System-size independence of directed flow at the RelativisticHeavy-Ion Collider  

SciTech Connect (OSTI)

We measure directed flow (v{sub 1}) for charged particles in Au + Au and Cu + Cu collisions at {radical}s{sub NN} = 200 GeV and 62.4 GeV, as a function of pseudorapidity ({eta}), transverse momentum (p{sub t}) and collision centrality, based on data from the STAR experiment. We find that the directed flow depends on the incident energy but, contrary to all available model implementations, not on the size of the colliding system at a given centrality. We extend the validity of the limiting fragmentation concept to v{sub 1} in different collision systems, and investigate possible explanations for the observed sign change in v{sub 1}(p{sub t}).

STAR Coll

2008-09-20T23:59:59.000Z

210

Real-time operating systems at higher control  

SciTech Connect (OSTI)

Although virtually all development of real-time operating systems focuses on the lowest of the three traditional control levels, sheet economics demands higher level real-time OSs. Meeting this demand requires a major change in the mindset of the people who have been focusing on the lowest level of control. {open_quotes}These people are trying to deal with an elephant`s tail, but they don`t realize that there is an elephant attached to it.{close_quotes} For more than three decades, the historical real-time mindset, concepts and techniques have been driven by a particular pair of contexts. First is the application context, which can be characterized as {open_quotes}small, simple, centralized, static subsystems for low-level, sampled data, monitoring and first-order control.{close_quotes} Second is the hardware context, characterized by a scarcity of hardware resources due to size, weight, power and cost considerations. Both of these contexts are changing dramatically in ways that {open_quotes}have a significant impact on the concepts and techniques of real-time computing.{close_quotes} Hardware now offers much higher performance and the real-time domain is expanding upward in the application control hierarchy.

Jensen, E.D.

1995-01-01T23:59:59.000Z

211

Pressurized reactor system and a method of operating the same  

DOE Patents [OSTI]

A method and apparatus are provided for operating a pressurized reactor system in order to precisely control the temperature within a pressure vessel in order to minimize condensation of corrosive materials from gases on the surfaces of the pressure vessel or contained circulating fluidized bed reactor, and to prevent the temperature of the components from reaching a detrimentally high level, while at the same time allowing quick heating of the pressure vessel interior volume during start-up. Superatmospheric pressure gas is introduced from the first conduit into the fluidized bed reactor and heat derived reactions such as combustion and gassification are maintained in the reactor. Gas is exhausted from the reactor and pressure vessel through a second conduit. Gas is circulated from one part of the inside volume to another to control the temperature of the inside volume, such as by passing the gas through an exterior conduit which has a heat exchanger, control valve, blower and compressor associated therewith, or by causing natural convection flow of circulating gas within one or more generally vertically extending gas passages entirely within the pressure vessel (and containing heat exchangers, flow rate control valves, or the like therein). Preferably, inert gas is provided as a circulating gas, and the inert gas may also be used in emergency shut-down situations. In emergency shut-down reaction gas being supplied to the reactor is cut off, while inert gas from the interior gas volume of the pressure vessel is introduced into the reactor.

Isaksson, Juhani M. (Karhula, FI)

1996-01-01T23:59:59.000Z

212

Pressurized reactor system and a method of operating the same  

DOE Patents [OSTI]

A method and apparatus are provided for operating a pressurized reactor system in order to precisely control the temperature within a pressure vessel in order to minimize condensation of corrosive materials from gases on the surfaces of the pressure vessel or contained circulating fluidized bed reactor, and to prevent the temperature of the components from reaching a detrimentally high level, while at the same time allowing quick heating of the pressure vessel interior volume during start-up. Super-atmospheric pressure gas is introduced from the first conduit into the fluidized bed reactor and heat derived reactions such as combustion and gasification are maintained in the reactor. Gas is exhausted from the reactor and pressure vessel through a second conduit. Gas is circulated from one part of the inside volume to another to control the temperature of the inside volume, such as by passing the gas through an exterior conduit which has a heat exchanger, control valve, blower and compressor associated therewith, or by causing natural convection flow of circulating gas within one or more generally vertically extending gas passages entirely within the pressure vessel (and containing heat exchangers, flow rate control valves, or the like therein). Preferably, inert gas is provided as a circulating gas, and the inert gas may also be used in emergency shut-down situations. In emergency shut-down reaction gas being supplied to the reactor is cut off, while inert gas from the interior gas volume of the pressure vessel is introduced into the reactor. 2 figs.

Isaksson, J.M.

1996-06-18T23:59:59.000Z

213

Operating Experience Review of the INL HTE Gas Monitoring System  

SciTech Connect (OSTI)

This paper describes the operations of several types of gas monitors in use at the Idaho National Laboratory (INL) High Temperature Electrolysis Experiment (HTE) laboratory. The gases monitored at hydrogen, carbon monoxide, carbon dioxide, and oxygen. The operating time, calibration, and unwanted alarms are described. The calibration session time durations are described. Some simple statistics are given for the reliability of these monitors and the results are compared to operating experiences of other types of monitors.

L. C. Cadwallader; K. G. DeWall

2010-06-01T23:59:59.000Z

214

Development of Optimization Tool for Air Conditioning System Operation  

E-Print Network [OSTI]

Operations, Berlin, Germany, October 20-22, 2008 Outside air temperature and the absolute air humidity are predicted by the Auto-regressive Integrated Moving Average (ARIMA) model [1],[2]. The solar radiation on a horizontal surface... of the error margin Energy Consumption (set value A) Energy Consumption (set value B) ESL-IC-08-10-55 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 J VAV unit is also operated under...

Sumiyoshi, D.; Akashi, Y.

215

The NOAA National Operational Model Archive and Distribution System -NOMADS  

E-Print Network [OSTI]

for access to real-time and retrospective high volume numerical weather prediction and climate models been on weather and reanalysis. Plans to support climate models and associated observational data a unified climate and weather model archive providing format independent access to retrospective models

216

HEMP emergency planning and operating procedures for electric power systems. Power Systems Technology Program  

SciTech Connect (OSTI)

Investigations of the impact of high-altitude electromagnetic pulse (HEMP) on electric power systems and electrical equipment have revealed that HEMP creates both misoperation and failures. These events result from both the early time E{sub 1} (steep-front pulse) component and the late time E{sub 3} (geomagnetic perturbations) component of HEMP. In this report a HEMP event is viewed in terms of its marginal impact over classical power system disturbances by considering the unique properties and consequences of HEMP. This report focuses on system-wide electrical component failures and their potential consequences from HEMP. In particular, the effectiveness of planning and operating procedures for electric systems is evaluated while under the influence of HEMP. This assessment relies on published data and characterizes utilities using the North American Electric Reliability Council`s regions and guidelines to model electric power system planning and operations. Key issues addressed by the report include how electric power systems are affected by HEMP and what actions electric utilities can initiate to reduce the consequences of HEMP. The report also reviews the salient features of earlier HEMP studies and projects, examines technology trends in the electric power industry which are affected by HEMP, characterizes the vulnerability of power systems to HEMP, and explores the capability of electric systems to recover from a HEMP event.

Reddoch, T.W.; Markel, L.C. [Electrotek Concepts, Inc., Knoxville, TN (United States)

1991-12-31T23:59:59.000Z

217

Independent Activity Report, Sandia National Laboratories - September...  

Broader source: Energy.gov (indexed) [DOE]

September 2012 Operational Awareness Oversight of Sandia National Laboratories HIAR SNL-2012-09-13 This Independent Activity Report documents an operational awareness activity...

218

Independent Activity Report, West Valley Demonstration Project...  

Broader source: Energy.gov (indexed) [DOE]

July 2012 Operational Awareness Oversight of the West Valley Demonstration Project HIAR WVDP-2012-07-30 This Independent Activity Report documents an operational awareness...

219

Wind-To-Hydrogen Project: Operational Experience, Performance Testing, and Systems Integration  

SciTech Connect (OSTI)

The Wind2H2 system is fully functional and continues to gather performance data. In this report, specifications of the Wind2H2 equipment (electrolyzers, compressor, hydrogen storage tanks, and the hydrogen fueled generator) are summarized. System operational experience and lessons learned are discussed. Valuable operational experience is shared through running, testing, daily operations, and troubleshooting the Wind2H2 system and equipment errors are being logged to help evaluate the reliability of the system.

Harrison, K. W.; Martin, G. D.; Ramsden, T. G.; Kramer, W. E.; Novachek, F. J.

2009-03-01T23:59:59.000Z

220

Control system for, and a method of, heating an operator station of a work machine  

DOE Patents [OSTI]

There are situations in which an operator remains in an operator station of a work machine when an engine of the work machine is inactive. The present invention includes a control system for, and a method of, heating the operator station when the engine is inactive. A heating system of the work machine includes an electrically-powered coolant pump, a power source, and at least one piece of warmed machinery. An operator heat controller is moveable between a first and a second position, and is operable to connect the electrically-powered coolant pump to the power source when the engine is inactive and the operator heat controller is in the first position. Thus, by deactivating the engine and then moving the operator heat controller to the first position, the operator may supply electrical energy to the electrically-powered coolant pump, which is operably coupled to heat the operator station.

Baker, Thomas M.; Hoff, Brian D.; Akasam, Sivaprasad

2005-04-05T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Semi-Autonomous Multi-Use Robot System and Method of Operation  

Energy Innovation Portal (Marketing Summaries) [EERE]

This invention relates in general to robotic systems and in particular to a semi- autonomous multi-use robot system and a method for cost effective operation of the system within an enclosed space...

2012-01-12T23:59:59.000Z

222

Optimal operation and design of solar-thermal energy storage systems  

E-Print Network [OSTI]

The present thesis focuses on the optimal operation and design of solar-thermal energy storage systems. First, optimization of time-variable operation to maximize revenue through selling and purchasing electricity to/from ...

Lizarraga-Garca, Enrique

2012-01-01T23:59:59.000Z

223

Improved Boiler System Operation with Real-time Chemical Control  

E-Print Network [OSTI]

,910. The return on investment for these changes is shown in Table 3. The savings amounts do not include labor savings associated with reduced operator testing loads, nor possible chemical savings from reduced chemical usage, due to higher cycles. CASE...

Bloom, D.; Jenkins, B.

2010-01-01T23:59:59.000Z

224

Management of Power Demand through Operations of Building Systems  

E-Print Network [OSTI]

included utilizing the thermal mass to reduce cooling production and distribution during the last hour of occupancy, time-of-day control of chillers and auxiliaries, and de-lamping. The implemented operational changes led to significant reductions...

ElSherbini, A. I.; Maheshwari, G.; Al-Naqib, D.; Al-Mulla, A.

225

System and method of operating toroidal magnetic confinement devices  

DOE Patents [OSTI]

This invention pertains to methods and arrangements for attaining high beta values in plasma confinement devices. More specifically, this invention pertains to methods for accessing the second stability region of operation in toroidal magnetic confinement devices.

Chance, M.S.; Jardin, S.C.; Stix, T.H.; Grimm, R.C.; Manickam, J.; Okabayashi, M.

1984-08-30T23:59:59.000Z

226

Optimal design and operation of energy polygeneration systems  

E-Print Network [OSTI]

Polygeneration is a concept where multiple energy products are generated in a single plant by tightly integrating multiple processes into one system. Compared to conventional single-product systems, polygeneration systems ...

Chen, Yang, Ph. D. Massachusetts Institute of Technology. Department of Chemical Engineering

2013-01-01T23:59:59.000Z

227

NOAA Harmful Algal Bloom Operational Forecast System Southwest Florida Forecast Region Maps  

E-Print Network [OSTI]

Forecast System Southwest Florida Forecast Region Maps 0 20 4010 Miles #12;Bay-S Pinellas Bay-UPR Bay Bloom Operational Forecast System Southwest Florida Forecast Region Maps 0 5 102.5 Miles #12;Bay Harmful Algal Bloom Operational Forecast System Southwest Florida Forecast Region Maps 0 5 102.5 Miles #12

228

Configurable memory system and method for providing atomic counting operations in a memory device  

DOE Patents [OSTI]

A memory system and method for providing atomic memory-based counter operations to operating systems and applications that make most efficient use of counter-backing memory and virtual and physical address space, while simplifying operating system memory management, and enabling the counter-backing memory to be used for purposes other than counter-backing storage when desired. The encoding and address decoding enabled by the invention provides all this functionality through a combination of software and hardware.

Bellofatto, Ralph E. (Ridgefield, CT); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Ohmacht, Martin (Yorktown Heights, NY)

2010-09-14T23:59:59.000Z

229

Operator renewal theory and mixing rates for dynamical systems with in nite measure  

E-Print Network [OSTI]

Operator renewal theory and mixing rates for dynamical systems with in#12;nite measure Ian of operator renewal sequences in the context of in#12;nite ergodic theory. For large classes of dynamical for mixing rates. Sarig [37] introduced a powerful new technique, operator renewal theory, to obtain precise

230

Improving Heating System Operations Using Water Re-Circulation  

E-Print Network [OSTI]

In order to solve the imbalance problem of a heating system, brought about by consumer demand and regulation, and save the electricity energy consumed by a circulation pump, a water mixing and pressure difference control heating system is proposed...

Li, F.; Han, J.

2006-01-01T23:59:59.000Z

231

Applications of Optimal Building Energy System Selection and Operation  

SciTech Connect (OSTI)

Berkeley Lab has been developing the Distributed Energy Resources Customer Adoption Model (DER-CAM) for several years. Given load curves for energy services requirements in a building microgrid (u grid), fuel costs and other economic inputs, and a menu of available technologies, DER-CAM finds the optimum equipment fleet and its optimum operating schedule using a mixed integer linear programming approach. This capability is being applied using a software as a service (SaaS) model. Optimisation problems are set up on a Berkeley Lab server and clients can execute their jobs as needed, typically daily. The evolution of this approach is demonstrated by description of three ongoing projects. The first is a public access web site focused on solar photovoltaic generation and battery viability at large commercial and industrial customer sites. The second is a building CO2 emissions reduction operations problem for a University of California, Davis student dining hall for which potential investments are also considered. And the third, is both a battery selection problem and a rolling operating schedule problem for a large County Jail. Together these examples show that optimization of building u grid design and operation can be effectively achieved using SaaS.

Marnay, Chris; Stadler, Michael; Siddiqui, Afzal; DeForest, Nicholas; Donadee, Jon; Bhattacharya, Prajesh; Lai, Judy

2011-04-01T23:59:59.000Z

232

Recirculating Liquid Nitrogen System for Operation of Cryogenic Pumps  

E-Print Network [OSTI]

is provided by a LN2-cooled radiation shroud, which reduces the radiative heat load on the cryosail. Since Engineering, Mitchell.Walker@ae.gatech.edu #12;2 nitrogen shroud, the heat transfer calculated by Eqn. (1 operating temperature. This is seen notionally by equation 1: Eqn. (1) where Q is the rate of heat transfer

Walker, Mitchell

233

Lessons Learned: Planning and Operating Power Systems with Large  

E-Print Network [OSTI]

flow) run-of-river hydro plant. While there are plans for large size photovoltaic (PV) installations on both islands, small residential roof-mounted PV systems have already proliferated, and an almost exponential growth of these small systems is forecasted. Figure 1 Small Net Metered PV Systems Installed

234

The Effect of Degraded Digital Instrumentation and Control systems on Human-system Interfaces and Operator Performance  

SciTech Connect (OSTI)

Integrated digital instrumentation and control (I&C) systems in new and advanced nuclear power plants (NPPs) will support operators in monitoring and controlling the plants. Even though digital systems typically are expected to be reliable, their potential for degradation or failure significantly could affect the operators performance and, consequently, jeopardize plant safety. This U.S. Nuclear Regulatory Commission (NRC) research investigated the effects of degraded I&C systems on human performance and on plant operations. The objective was to develop technical basis and guidance for human factors engineering (HFE) reviews addressing the operator's ability to detect and manage degraded digital I&C conditions. We reviewed pertinent standards and guidelines, empirical studies, and plant operating experience. In addition, we evaluated the potential effects of selected failure modes of the digital feedwater control system of a currently operating pressurized water reactor (PWR) on human-system interfaces (HSIs) and the operators performance. Our findings indicated that I&C degradations are prevalent in plants employing digital systems, and the overall effects on the plant's behavior can be significant, such as causing a reactor trip or equipment to operate unexpectedly. I&C degradations may affect the HSIs used by operators to monitor and control the plant. For example, deterioration of the sensors can complicate the operators interpretation of displays, and sometimes may mislead them by making it appear that a process disturbance has occurred. We used the findings as the technical basis upon which to develop HFE review guidance.

OHara, J.M.; Gunther, B.; Martinez-Guridi, G. (BNL); Xing, J.; Barnes, V. (NRC)

2010-11-07T23:59:59.000Z

235

Abstract--By penetrating the SCADA system, an intruder may remotely operate a power system using supervisory control  

E-Print Network [OSTI]

1 Abstract-- By penetrating the SCADA system, an intruder may remotely operate a power system using vulnerability using attack trees. The attack tree formulation based on power system control networks is used to evaluate the system, scenario, and leaf vulnerabilities. The measure of vulnerabilities in the power system

Manimaran, Govindarasu

236

An Approach to Analyze Tradeoffs for Aerospace System Design and Operation  

E-Print Network [OSTI]

There are important tradeoffs that need to be considered for the design and operation of aerospace systems. In addition to tradeoffs, there may also be multiple stakeholders of interest to the system and each may have ...

O'Neill, Gregory

2012-11-01T23:59:59.000Z

237

An approach to analyze tradeoffs for aerospace system design and operation  

E-Print Network [OSTI]

There are important tradeoffs that need to be considered for the design and operation of aerospace systems. In addition to tradeoffs, there may also be multiple stakeholders of interest to the system and each may have ...

O'Neill, Michael Gregory

2013-01-01T23:59:59.000Z

238

Combined Operation of Solar Energy Source Heat Pump, Low-vale Electricity and Floor Radiant System  

E-Print Network [OSTI]

solar energy, low-vale electricity as heat sources in a floor radiant system are analyzed. This paper presents a new heat pump system and discusses its operational modes in winter....

Liu, G.; Guo, Z.; Hu, S.

2006-01-01T23:59:59.000Z

239

Joint-Frequency Bins versus Conventional Bin Weather Data in Analysis of HVAC System Operation  

E-Print Network [OSTI]

this study the use of joint-frequency bins has relative added value to the analysis of HVAC system operation depending on whether the system is dominated by ventilation loads....

Jones, A.; Baltazar, J. C.; Claridge, D. E.

240

Processing module operating methods, processing modules, and communications systems  

DOE Patents [OSTI]

A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

2014-09-09T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Decision support for operations and maintenance (DSOM) system  

DOE Patents [OSTI]

A method for minimizing the life cycle cost of processes such as heating a building. The method utilizes sensors to monitor various pieces of equipment used in the process, for example, boilers, turbines, and the like. The method then performs the steps of identifying a set optimal operating conditions for the process, identifying and measuring parameters necessary to characterize the actual operating condition of the process, validating data generated by measuring those parameters, characterizing the actual condition of the process, identifying an optimal condition corresponding to the actual condition, comparing said optimal condition with the actual condition and identifying variances between the two, and drawing from a set of pre-defined algorithms created using best engineering practices, an explanation of at least one likely source and at least one recommended remedial action for selected variances, and providing said explanation as an output to at least one user.

Jarrell, Donald B. (Kennewick, WA); Meador, Richard J. (Richland, WA); Sisk, Daniel R. (Richland, WA); Hatley, Darrel D. (Kennewick, WA); Brown, Daryl R. (Richland, WA); Keibel, Gary R. (Richland, WA); Gowri, Krishnan (Richland, WA); Reyes-Spindola, Jorge F. (Richland, WA); Adams, Kevin J. (San Bruno, CA); Yates, Kenneth R. (Lake Oswego, OR); Eschbach, Elizabeth J. (Fort Collins, CO); Stratton, Rex C. (Richland, WA)

2006-03-21T23:59:59.000Z

242

POWER GRID DYNAMICS: ENHANCING POWER SYSTEM OPERATION THROUGH PRONY ANALYSIS  

SciTech Connect (OSTI)

Prony Analysis is a technique used to decompose a signal into a series consisting of weighted complex exponentials and promises to be an effi cient way of recognizing sensitive lines during faults in power systems such as the U.S. Power grid. Positive Sequence Load Flow (PSLF) was used to simulate the performance of a simple two-area-four-generator system and the reaction of the system during a line fault. The Dynamic System Identifi cation (DSI) Toolbox was used to perform Prony analysis and use modal information to identify key transmission lines for power fl ow adjustment to improve system damping. The success of the application of Prony analysis methods to the data obtained from PSLF is reported, and the key transmission line for adjustment is identifi ed. Future work will focus on larger systems and improving the current algorithms to deal with networks such as large portions of the Western Electricity Coordinating Council (WECC) power grid.

Ray, C.; Huang, Z.

2007-01-01T23:59:59.000Z

243

The Steam System Scoping Tool: Benchmarking Your Steam Operations Through Best Practices  

E-Print Network [OSTI]

system efficiency. The BestPractices Steam effort, a part of the DOE-OIT effort, has developed a new tool that steam energy managers and operations personnel can use to assess their steam operations and improve their steam energy usage -the Steam System...

Wright, A.; Hahn, G.

244

A Real-Time Decision Support System for High Cost Oil-Well Drilling Operations  

E-Print Network [OSTI]

A Real-Time Decision Support System for High Cost Oil-Well Drilling Operations Odd Erik Gundersen In this paper we present DrillEdge - a commercial and award winning software system that monitors oil-well drilling operations in order to reduce non-productive time (NPT). DrillEdge utilizes case-based reasoning

Aamodt, Agnar

245

Operator renewal theory and mixing rates for dynamical systems with infinite measure  

E-Print Network [OSTI]

Operator renewal theory and mixing rates for dynamical systems with infinite measure Ian Melbourne renewal sequences in the context of infinite ergodic theory. For large classes of dynamical systems technique, operator renewal theory, to obtain precise asymptotics and hence sharp mixing rates

246

Investigation of Fuel Cell System Performance and Operation: A Fuel Cell as a Practical  

E-Print Network [OSTI]

Investigation of Fuel Cell System Performance and Operation: A Fuel Cell as a Practical Distributed of Fuel Cell System Performance and Operation: A Fuel Cell as a Practical Distributed Generator George Research Center program. This report is of work done under the PSERC project "Investigation of Fuel Cell

247

Integrated Retail and Wholesale (IRW) Power System Operations with Smart-Grid Functionality  

E-Print Network [OSTI]

Integrated Retail and Wholesale (IRW) Power System Operations with Smart-Grid Functionality Leigh of the Integrated Retail/Wholesale (IRW) project at Iowa State University · IRW Test Bed development · Integration-NE, MISO, XM, RTE, MEC IRW Project: Integrated Retail/Wholesale Power System Operation with Smart

Tesfatsion, Leigh

248

Application Performance in the QLinux Multimedia Operating System Vijay Sundaram Abhishek Chandra Pawan Goyal  

E-Print Network [OSTI]

a mix of (i) conventional best- effort applications that desire low average response times demanding application mixes can be easily han- dled by a conventional best-effort operating system running them a practical choice for conven- tional operating systems. "!$#&%('0)0123#54 '6! Recent advances

Kaur, Jasleen

249

Operating Procedures for the SAMCO ICP RIE System  

E-Print Network [OSTI]

flows, RF power supplies He back side cooling system and active recipe. In the figure above, the various high- density plasma that is created through the use of two RF power supplies. In addition, the system.................................................................................................................. 9 3. RF Power Supplies

Reif, Rafael

250

Design and operation of microchemical systems for multistep chemical syntheses  

E-Print Network [OSTI]

This thesis focused on advancing the microchemical field from single device based demonstrations to systems that can perform multi-step series and parallel synthesis. Few examples of micro-separators and micro-pumps suited ...

Sahoo, Hemantkumar

2008-01-01T23:59:59.000Z

251

Water Distribution and Wastewater Systems Operators (North Dakota)  

Broader source: Energy.gov [DOE]

All public water supply and wastewater disposal systems are subject to classification and regulation by the State of North Dakota, and must obtain certification from the State Department of Health.

252

Lithium System Operation Dan Lev and David Stein  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 5 Thermal Control 24 5.1 Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5.1.1 Reservoir and Cylinder Heaters . . . . . . . . . . . . . . . 26 5.1.2 Line Heaters Circuit Board . . . . . . . . . . . . . . 31 5.4 Water Cooling System

253

IEAB Independent Economic Analysis Board  

E-Print Network [OSTI]

IEAB Independent Economic Analysis Board Hans Radtke, Chair Roger Mann, Vice-Chair Daniel D. Huppert Joel R. Hamilton Susan S. Hanna John Duffield Noelwah R. Netusil Independent Economic Analysis Board Task Number 139 Integrated Hatchery Operations: Fish and Wildlife Program Costs and Other Economic

254

Daily/Hourly Hydrosystem Operation : How the Columbia River System Responds to Short-Term Needs.  

SciTech Connect (OSTI)

The System Operation Review, being conducted by the Bonneville Power Administration, the US Army Corps of Engineers, and the US Bureau of Reclamation, is analyzing current and potential future operations of the Columbia River System. One goal of the System Operations Review is to develop a new System Operation Strategy. The strategy will be designed to balance the many regionally and nationally important uses of the Columbia River system. Short-term operations address the dynamics that affect the Northwest hydro system and its multiple uses. Demands for electrical power and natural streamflows change constantly and thus are not precisely predictable. Other uses of the hydro system have constantly changing needs, too, many of which can interfere with other uses. Project operators must address various river needs, physical limitations, weather, and streamflow conditions while maintaining the stability of the electric system and keeping your lights on. It takes staffing around the clock to manage the hour-to-hour changes that occur and the challenges that face project operators all the time.

Columbia River System Operation Review (U.S.)

1994-02-01T23:59:59.000Z

255

Independent peer review panel report on the integrated nonthermal treatment systems study and the comparison of integrated thermal and integrated nonthermal treatment systems for mixed low level waste  

SciTech Connect (OSTI)

The US Department of Energy`s (DOE) Office of Environmental Management (EM) Office of Science and Technology (OST) has conducted studies of integrated thermal treatment systems and integrated nonthermal treatment systems (INTS) for treating contact handled, alpha and non-alpha mixed low level radioactive waste (MLLW). The MLLW in the DOE complex consists of a wide variety of organic and inorganic solids and liquids contaminated with radioactive substances. Treatment systems are needed to destroy organic material and stabilize residues prior to land disposal. In May 1996 the Deputy Assistant Secretary for OST appointed an Independent Peer Review Panel to: (1) review and comment on the INTS Study; (2) make recommendations on the most promising thermal and nonthermal treatment systems; (3) make recommendations on research and development necessary to prove the performance of nonthermal and thermal technologies; and (4) review and comment on the preliminary draft of the ITTS/INTS Comparison Report. This report presents the primary conclusions and recommendations based on the review of the INTS study and the comparison report. System selection, overviews, comparisons, cost estimations and sensitivity analyses, and recommended R and D engineering needs are then described and discussed.

NONE

1996-08-01T23:59:59.000Z

256

Development and operational experience of magnetic horn system for T2K experiment  

E-Print Network [OSTI]

A magnetic horn system to be operated at a pulsed current of 320 kA and to survive high-power proton beam operation at 750 kW was developed for the T2K experiment. The first set of T2K magnetic horns was operated for over 12 million pulses during the four years of operation from 2010 to 2013, under a maximum beam power of 230 kW, and $6.63\\times10^{20}$ protons were exposed to the production target. No significant damage was observed throughout this period. This successful operation of the T2K magnetic horns led to the discovery of the $\

Sekiguchi, T; Fujii, Y; Hagiwara, M; Hasegawa, T; Hayashi, K; Ishida, T; Ishii, T; Kobayashi, H; Kobayashi, T; Koike, S; Koseki, K; Maruyama, T; Matsumoto, H; Nakadaira, T; Nakamura, K; Nakayoshi, K; Nishikawa, K; Oyama, Y; Sakashita, K; Shibata, M; Suzuki, Y; Tada, M; Takahashi, K; Tsukamoto, T; Yamada, Y; Yamanoi, Y; Yamaoka, H; Ichikawa, A K; Kubo, H; Butcher, Z; Coleman, S; Missert, A; Spitz, J; Zimmerman, E D; Tzanov, M; Bartoszek, L

2015-01-01T23:59:59.000Z

257

Novel Hydrogen Production Systems Operative at Thermodynamic Extremes  

SciTech Connect (OSTI)

We have employed a suite of molecular, bioinformatics, and biochemical tools to interrogate the thermodynamically limiting steps of H{sub 2} production from fatty acids in syntrophic communities. We also developed a new microbial model system that generates high H{sub 2} concentrations (over 17% of the gas phase) with high H{sub 2} yields of over 3 moles H{sub 2} per mole glucose. Lastly, a systems-based study of biohydrogen production in model anaerobic consortia was performed to begin identifying key regulated steps as a precursor to modeling co-metabolism. The results of these studies significantly expand our ability to predict and model systems for H{sub 2} production in novel anaerobes that are currently very poorly documented or understood.

Gunsalus, Robert

2012-11-30T23:59:59.000Z

258

A Human Performance Modeling System for Process Safety Operations  

E-Print Network [OSTI]

this in the future, as well. When an abnormal process situation occurs, human intervention by responding to the alarm is often the last line of defense before a Safety Instrumented System (SIS) takes action to trip or shut down the system. If SIS takes... need to be followed by a terminal activity (get or put). Table 2. Codes for movement elements (small objects) 25 Movement MOD Body Part Distance Moved M1 1 Finger (hinged at knuckle) 1? M2 2 Hand (hinged at wrist) 2? M3 3 Arm (hinged...

Harputlu, Emrah 1986-

2013-01-02T23:59:59.000Z

259

Development, Operation, and Results From the Texas Automated Buoy System  

E-Print Network [OSTI]

of the Gulf of Mexico Coastal Ocean Observing System (GCOOS) regional association and the primary source of near-surface current measurements in the northwestern Gulf of Mexico. This article describes the origin of Angolan crude, exploded and caught fire while lightering its cargo about 60 nautical miles south

260

Optimal monitoring and visualization of steady state power system operation  

E-Print Network [OSTI]

observable islands. To guard against unexpected failures of PMUs, the numerical method is extended to account for single PMU loss. In the last part of this dissertation, a 3D graphic user interface for power system analysis is developed. It supports two basic...

Xu, Bei

2009-06-02T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

SUPERBOTS ON THE LUNAR SURFACE: A HABITAT OPERATIONS AND MAINTENANCE SYSTEM (HOMS). S. J. Lawrence1  

E-Print Network [OSTI]

Center, Mountain View, CA; 4 Metrica, Houston, TX; 5 DigitalSpace, Santa Cruz, CA; 6 Lockheed Martin and payload mass while enhancing mission performance, reliability, and safety through the SuperBot system's ability to change shape and function as needed. SuperBots can work independently or in concert to perform

Shen, Wei-Min

262

Managing Abnormal Operation through Process Integration and Cogeneration Systems  

E-Print Network [OSTI]

area. Since it is found in deep reservoirs it may contain components such as hydrogen sulfide and carbon dioxide. These components due to their properties cause corrosion and are toxic therefore they should be separated from natural gas before... organizations (UNEP 2006). 19 De-aerator is also one of the units in cogeneration system. Since dissolved gases such as oxygen and carbon dioxide can cause corrosion, deaerator unit is responsible for separating them from condensate stream to steam...

Kamrava, Serveh

2014-08-05T23:59:59.000Z

263

Impact of CFC Regulations on Environmental System Design and Operation  

E-Print Network [OSTI]

CORPORATION. SYRACUSE. NY since not all refrigerants are classified as CFC's. There is another group of refrigerants that we'll be discussing later on that are referred to as HCFC's that are only partially halogenated and still contain one or more... hydrogen atoms in their molecular structure. Where are CFC's most commonly found? Everyone who owns a refrigerator is using CFC's to keep their food fresh. Supermarkets and restaurants use CFC refrigeration systems to keep meat cold and ice cream...

Lechtanski, J. B.

264

Male gender, increased blood viscosity, body mass index and triglyceride levels are independently associated with systemic relative hypertension in sickle cell anemia  

E-Print Network [OSTI]

are independently associated with systemic relative hypertension in sickle cell anemia Yann Lamarre1,2,3 *, Marie: 2931, 3 tables, 0 figure Key words: Sickle cell anemia, relative hypertension, blood viscosity, vaso.1371/journal.pone.0066004 #12;2 Abstract: Patients with sickle cell anemia (SCA) have usually lower

Boyer, Edmond

265

Operability test procedure for rotary mode core sampling system {number_sign}3  

SciTech Connect (OSTI)

This document gives instructions for the Operability Testing of the Rotary Mode Core Sampling (RMCS) System No. 3. This document is based on the Operability Test Procedure for RMCS system No. 2 because the basic design is the same for all three systems. Modifications have been made from the original design only when exact duplication was not feasible or design improvements could be incorporated without affecting the operation of the system. Operability testing of the Rotary Mode Core Sampling System No. 3, will verify that functional and operational requirements have been met. Testing will be completed in two phases. The first phase of testing (section 7) will involve operating the truck equipment to demonstrate its capabilities. The second phase of testing (section 8) will take repeated samples in a simulated operation environment. These tests will be conducted at the ``Rock Slinger`` test site located just south of U-Plant in the 200 West Area. Tests will be done in a simulated tank farm environment. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Systems will be assembled and arranged in a manner similar to that expected in the field.

Farris, T.R.; Jarecki, T.D.

1995-04-26T23:59:59.000Z

266

Operability test procedure for rotary mode core sampling system {number_sign}4  

SciTech Connect (OSTI)

This document gives instructions for the Operability Testing of the Rotary Mode Core Sampling (RMCS) System No. 4. This document is based on the Operability Test Procedure for RMCS system No. 2 because the basic design is the same for all three systems. Modifications have been made from the original design only when exact duplication was not feasible or design improvements could be incorporated without affecting the operation of the system. Operability testing of the Rotary Mode Core Sampling System No. 4 will verify that functional and operational requirements have been met. Testing will be completed in two phases. The first phase of testing (section 7) will involve operating the truck equipment to demonstrate its capabilities. The second phase of testing (section 8) will take repeated samples in a simulated operation environment. These tests will be conducted at the ``Rock Slinger`` test site located just south of U-Plant in the 200 West Area. Tests will be done in a simulated tank farm environment. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Systems will be assembled and arranged in a manner similar to that expected in the field.

Farris, T.R.; Jarecki, T.D.

1995-04-26T23:59:59.000Z

267

Hydrogen and Oxygen Gas Monitoring System Design and Operation  

SciTech Connect (OSTI)

This paper describes pertinent design practices of selecting types of monitors, monitor unit placement, setpoint selection, and maintenance considerations for gas monitors. While hydrogen gas monitors and enriched oxygen atmosphere monitors as they would be needed for hydrogen production experiments are the primary focus of this paper, monitors for carbon monoxide and carbon dioxide are also discussed. The experiences of designing, installing, and calibrating gas monitors for a laboratory where experiments in support of the DOE Nuclear Hydrogen Initiative (NHI) are described along with codes, standards, and regulations for these monitors. Information from the literature about best operating practices is also presented. The NHI program has two types of activities. The first, near-term activity is laboratory and pilot-plant experimentation with different processes in the kilogram per day scale to select the most promising types of processes for future applications of hydrogen production. Prudent design calls for indoor gas monitors to sense any hydrogen leaks within these laboratory rooms. The second, longer-term activity is the prototype, or large-scale plants to produce tons of hydrogen per day. These large, outdoor production plants will require area (or fencepost) monitoring of hydrogen gas leaks. Some processes will have oxygen production with hydrogen production, and any oxygen releases are also safety concerns since oxygen gas is the strongest oxidizer. Monitoring of these gases is important for personnel safety of both indoor and outdoor experiments. There is some guidance available about proper placement of monitors. The fixed point, stationary monitor can only function if the intruding gas contacts the monitor. Therefore, monitor placement is vital to proper monitoring of the room or area. Factors in sensor location selection include: indoor or outdoor site, the location and nature of potential vapor/gas sources, chemical and physical data of the gases or vapors, liquids with volatility need sensors near the potential sources of release, nature and concentration of gas releases, natural and mechanical ventilation, detector installation locations not vulnerable to mechanical or water damage from normal operations, and locations that lend themselves to convenient maintenance and calibration. The guidance also states that sensors should be located in all areas where hazardous accumulations of gas may occur. Such areas might not be close to release points but might be areas with restricted air movement. Heavier than air gases are likely to accumulate in pits, trenches, drains, and other low areas. Lighter than air gases are more likely to accumulate in overhead spaces, above drop ceilings, etc. In general, sensors should be located close to any potential sources of major release of gas. The paper gives data on monitor sensitivity and expected lifetimes to support the monitor selection process. Proper selection of indoor and outdoor locations for monitors is described, accounting for the vapor densities of hydrogen and oxygen. The latest information on monitor alarm setpoint selection is presented. Typically, monitors require recalibration at least every six months, or more frequently for inhospitable locations, so ready access to the monitors is an important issue to consider in monitor siting. Gas monitors, depending on their type, can be susceptible to blockages of the detector element (i.e., dus

Lee C. Cadwallader; Kevin G. DeWall; J. Stephen Herring

2007-06-01T23:59:59.000Z

268

Operations manual for the Beneficial Uses Shipping System cask. Revision 1  

SciTech Connect (OSTI)

This document is the Operations Manual for the Beneficial Uses Shipping System (BUSS) cask. These operating instructions address requirements; for loading, shipping, and unloading, supplementing general operational information found in the BUSS Safety Analysis Report for Packaging (SARP), SAND 83-0698. Use of the BUSS cask is authorized by Department of Energy (DOE) and Nuclear Regulatory Commission (NRC) for the shipment of special form cesium chloride or strontium flouride capsules.

Bronowski, D.R.; Yoshimura, H.R.

1993-04-01T23:59:59.000Z

269

PIA - DOE Savannah River Operations Office PRISM System | Department of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002OpticsPeriodical: Volume 5,PETPIV System PIA - DOE

270

Investigating Operating System Noise in Extreme-Scale High-Performance Computing Systems using Simulation  

SciTech Connect (OSTI)

Hardware/software co-design for future-generation high-performance computing (HPC) systems aims at closing the gap between the peak capabilities of the hardware and the performance realized by applications (application-architecture performance gap). Performance profiling of architectures and applications is a crucial part of this iterative process. The work in this paper focuses on operating system (OS) noise as an additional factor to be considered for co-design. It represents the first step in including OS noise in HPC hardware/software co-design by adding a noise injection feature to an existing simulation-based co-design toolkit. It reuses an existing abstraction for OS noise with frequency (periodic recurrence) and period (duration of each occurrence) to enhance the processor model of the Extreme-scale Simulator (xSim) with synchronized and random OS noise simulation. The results demonstrate this capability by evaluating the impact of OS noise on MPI_Bcast() and MPI_Reduce() in a simulated future-generation HPC system with 2,097,152 compute nodes.

Engelmann, Christian [ORNL

2013-01-01T23:59:59.000Z

271

Development, implementation, and skill assessment of the NOAA/NOS Great Lakes Operational Forecast System  

E-Print Network [OSTI]

Development, implementation, and skill assessment of the NOAA/NOS Great Lakes Operational Forecast Lakes Operational Forecast System (GLOFS) uses near-real-time atmospheric observa- tions and numerical weather prediction forecast guidance to produce three-dimensional forecasts of water temperature

272

Integrated Retail and Wholesale Power System Operation with Smart-Grid Functionality  

E-Print Network [OSTI]

1 Integrated Retail and Wholesale Power System Operation with Smart-Grid Functionality Dionysios of retail and wholesale power markets operating over transmission and distribution networks with smart-grid functionality. This test bed seams together two existing test beds, the AMES Wholesale Power Market Test Bed

Tesfatsion, Leigh

273

Systems Modeling and Analysis Industrial Engineers are interested in optimizing the design and operation of complex systems  

E-Print Network [OSTI]

Systems Modeling and Analysis Industrial Engineers are interested in optimizing the design and operation of complex systems composed of people and machines using information, materials and energy to produce goods and services. Analyzing such systems with information-driven models is an essential step

Dyer, Bill

274

Operational Readiness Review Final Report for K Basin Fuel Transfer System  

SciTech Connect (OSTI)

An Operational Readiness Review (ORR) was conducted by the U.S. Department of Energy (DOE), Richland Operations Office (RL) to verify that an adequate state of readiness had been achieved for startup of the K Basin Fuel Transfer System (FTS). The DOE ORR was conducted during the period November 6-18, 2002. The DOE ORR team concluded that the K Basin Fuel Transfer System is ready to start operations, subject to completion and verification of identified pre-start findings. The ORR was conducted in accordance with the Spent Nuclear Fuel (SNF) K Basin Fuel Transfer System (FTS) Operational Readiness Review (ORR) Plan of Action and the Operational Readiness Review Implementation Plan for K Basin Fuel Transfer System. Review activities consisted of staff interviews, procedure and document reviews, and observations of normal facility operations, operational upset conditions, and an emergency drill. The DOE ORR Team also reviewed and assessed the adequacy of the contractor ORR3 and the RL line management review. The team concurred with the findings and observations identified in these two reports. The DOE ORR for the FTS evaluated the contractor under single-shift operations. Of concern to the ORR Team was that SNF Project management intended to change from a single-shift FTS operation to a two-shift operation shortly after the completion of the DOE ORR. The ORR team did not assess two-shift FTS operations and the ability of the contractor to conduct a smooth transition from shift to shift. However, the DOE ORR team did observe an operational upset drill that was conducted during day shift and carried over into swing shift; during this drill, swing shift was staffed with fewer personnel as would be expected for two-shift operations. The facility was able to adequately respond to the event with the reduced level of staff. The ORR Team was also able to observe a Shift Manager turnover meeting when one shift manager had to be relieved during the middle of the day. The ORR Team did not have the opportunity to observe a shift turnover from one crew to another. The ORR Team has evaluated the risk of not observing this activity and considers the risk to be minimal based on the fact that operating staff are very familiar with the FTS equipment and its procedures, and because existing Conduct of Operations processes and procedures are adequate and implemented. Because the ORR Team has not observed two-shift FTS operations, we recommend that additional RL oversight be provided at the start of two-shift FTS operations to evaluate the adequacy of crew turnovers.

DAVIES, T.H.

2002-10-01T23:59:59.000Z

275

DEVELOPMENT OF OPERATIONAL CONCEPTS FOR ADVANCED SMRs: THE ROLE OF COGNITIVE SYSTEMS ENGINEERING  

SciTech Connect (OSTI)

Advanced small modular reactors (AdvSMRs) will use advanced digital instrumentation and control systems, and make greater use of automation. These advances not only pose technical and operational challenges, but will inevitably have an effect on the operating and maintenance (O&M) cost of new plants. However, there is much uncertainty about the impact of AdvSMR designs on operational and human factors considerations, such as workload, situation awareness, human reliability, staffing levels, and the appropriate allocation of functions between the crew and various automated plant systems. Existing human factors and systems engineering design standards and methodologies are not current in terms of human interaction requirements for dynamic automated systems and are no longer suitable for the analysis of evolving operational concepts. New models and guidance for operational concepts for complex socio-technical systems need to adopt a state-of-the-art approach such as Cognitive Systems Engineering (CSE) that gives due consideration to the role of personnel. This approach we report on helps to identify and evaluate human challenges related to non-traditional concepts of operations. A framework - defining operational strategies was developed based on the operational analysis of Argonne National Laboratorys Experimental Breeder Reactor-II (EBR-II), a small (20MWe) sodium-cooled reactor that was successfully operated for thirty years. Insights from the application of the systematic application of the methodology and its utility are reviewed and arguments for the formal adoption of CSE as a value-added part of the Systems Engineering process are presented.

Jacques Hugo; David Gertman

2014-04-01T23:59:59.000Z

276

Incorporating operational flexibility into electric generation planning : impacts and methods for system design and policy analysis  

E-Print Network [OSTI]

This dissertation demonstrates how flexibility in hourly electricity operations can impact long-term planning and analysis for future power systems, particularly those with substantial variable renewables (e.g., wind) or ...

Palmintier, Bryan S. (Bryan Stephen)

2013-01-01T23:59:59.000Z

277

Extending safety assessment methods for remotely piloted aircraft operations in the national airspace system  

E-Print Network [OSTI]

Remotely Piloted Aircraft operations are growing rapidly in the United States specifically for the Department of Defense to achieve training needs. To ensure the safety of the National Airspace System is maintained to a ...

Horrell, Alexander C. (Alexander Chapman)

2012-01-01T23:59:59.000Z

278

Modeling the transient operation of an endothermic fuel cooling system for high Mach number vehicle missions  

E-Print Network [OSTI]

A computer model was developed to simulate the transient operation of a hypothetical endothermic fuel cooling system. The model simulated the performance of a cross-flow, shell and tube heat exchanger. This model was applied to a representative...

Williams, Mark Robert

1993-01-01T23:59:59.000Z

279

Reactive and voltage monitoring: The challenge for the system operators in the 1980's  

SciTech Connect (OSTI)

In order to gain perspective on the monitoring program for PJM, background relative to the physical characteristics and operating philosophy of the pool is offered. PJM is comprised of 11 electric utilities serving approximately 48,700 square miles, encompassing about 75% of Penna, 97% of N.J., all of Del and the District of Columbia, 60% of Md, and 1% of Va. The generating capability is comprised of 532 units at 116 generating stations, and totals approximately 45,000 MW. The PJM system peak load for 1980 was 34,420 MW. PJM has 27 tie lines with its neighboring systems. Although comprised of 11 utilities, the PJM system is operated as if it were a single company. Reasons for the PJM real-time monitoring system are presented and relevant details are discussed. Topics considered include operating criteria. Reactive and Voltage Monitoring, Current Operating Restrictions off-line analysis, and future requirements are discussed.

Willson, J.D.

1981-05-01T23:59:59.000Z

280

Evaluation of Storage Reallocation and Related Strategies for Optimizing Reservoir System Operations  

E-Print Network [OSTI]

TR-145 1988 Evaluation of Storage Reallocation and Related Strategies for Optimizing Reservoir System Operations R.A. Wurbs P.E. Carriere Texas Water Resources Institute Texas A&M University ...

Wurbs, Ralph A.; Carriere, Patrick E.

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

A Systems Approach to Optimize the Operation of a Refrigeration Unit at a Chemical Plant  

E-Print Network [OSTI]

This paper focuses on the ongoing system level analysis and the optimization results of two steamturbine driven refrigeration units at the Dow Chemical company Peroxymerics (PXC) plant located at St. Charles Operations in Hahnville, LA. Six...

Papar, R.; Zugibe, K.; Heitler, J.

2005-01-01T23:59:59.000Z

282

The Operation Management and Energy Consumption Analysis of the District Cooling System  

E-Print Network [OSTI]

for the operation management. It can be concluded that the district cooling system not only can save energy and protect the environment, but also is economically feasible. It should be developed and popularized in China because of its significant advantages....

Xu, Q.; Li, D.; Xu, W.

2006-01-01T23:59:59.000Z

283

Columbia River System Operation Review : Final Environmental Impact Statement, Main Report.  

SciTech Connect (OSTI)

The System Operation Review (SOR) Final EIS addresses four actions: (a) need to develop coordinated strategy for managing the multiple uses of the Federal Columbia River system (System Operating Strategy [SOS]); (b) need to provide interested parties other than management agencies with a long-term role in system planning (Forum); (c) need to renew or change current Canadian Entitlement Allocation Agreements (CEAA); and (d) need to renegotiate and renew the Pacific Northwest Coordination Agreement (PNCA). SOS alternatives analyzed are: (1) operation prior to Endangered Species Act listings of salmon stocks; (2) current operations (no action); (3) stable storage project operation; (4) natural river operation; (5) fixed drawdown; (6) operating strategies proposed by the U.S. Fish and Wildlife Service, National Marine Fisheries Service, State fisheries agencies, Native American tribes, and Federal operating agencies; and (7) Preferred Alternative. The seven Forum alternatives analyzed are: (1) decisionmaking by the SOR lead agencies (preferred alternative); (2) decisionmaking by SOR lead agencies and recommendations by an existing regional entity; (3) decisionmaking by SOR lead agencies and recommendations by a new regional entity; (4) decisionmaking by a Federal consultation forum; (5) decisionmaking by a new entity; (6) decisionmaking by one Federal operating agency; (7) decisionmaking by a Federal agency other than an operating agency. PNCA alternatives analyzed are: (1) no replacement contract; (2) contract to maximize regional power benefits; (3) roll over existing PNCA; (4) current PNCA with modified operating procedures (preferred alternative); (5) current PNCA with nonpower modifications. CEAA alternatives include: (1) no action (no replacement of current allocation agreements); (2) entitlement allocation: 55 percent Federal; 45 percent non-Federal; (3) entitlement allocation: 70 percent Federal, 30 percent non-Federal (preferred alternative); (4) no agreement.

Columbia River System Operation Review (U.S.); United States. Bonneville Power Administration; United States. Army. Corps of Engineers. North Pacific Division; United States. Bureau of Reclamation. Pacific Northwest Region.

1995-11-01T23:59:59.000Z

284

Impact of Improved Solar Forecasts on Bulk Power System Operations in ISO-NE (Presentation)  

SciTech Connect (OSTI)

The diurnal nature of solar power is made uncertain by variable cloud cover and the influence of atmospheric conditions on irradiance scattering processes. Its forecasting has become increasingly important to the unit commitment and dispatch process for efficient scheduling of generators in power system operations. This presentation is an overview of a study that examines the value of improved solar forecasts on Bulk Power System Operations.

Brancucci Martinez-Anido, C.; Florita, A.; Hodge, B.M.

2014-11-01T23:59:59.000Z

285

Mobile munitions assessment system design, testing, operational experience  

SciTech Connect (OSTI)

The remnants of America`s chemical weapons program exist at more than 200 sites in the United States. The U.S. Army`s Project Manager for Non-stockpile Chemical Material (PMNSCM) has the responsibility for the remediation of non-stockpile chemical warfare material (CWM). PMNSCM must respond to a variety of situations involving discovered, recovered or buried material. This response requires unique hardware capabilities to characterize, assess, and provide information to develop plans for disposing of the material. PMNSCM sponsored the development of a Mobile Munitions Assessment System (MMAS) at the Idaho National Engineering and Environmental Laboratory (INEEL) to meet the need to characterize and assess non-stockpile chemical warfare material. The MMAS equipment is capable of distinguishing CWM from conventional munitions, identifying the agent fill and level, and assessing the status of the firing train. The MMAS has a data processing, collection, and storage subsystem and a communications link to a Dugway Proving Ground (DPG) database. A typical data package includes X-rays, elemental spectra, weather data, physical descriptions, photographs, video, etc. The MMAS data will be used by the Army`s Munition Assessment and Review Board (MARB) to help determine the appropriate methods and safeguards necessary to store, transport, and dispose of non-stockpile CWM.

Watts, K.D.; Snyder, A.M. [Idaho National Engineering Lab., Idaho Falls, ID (United States); Rowe, L.C. [Army PM CML DEMIL, Aberdeen Proving Ground, MD (United States)

1997-08-01T23:59:59.000Z

286

Light Duty Utility Arm system pre-operational (cold test) test plan  

SciTech Connect (OSTI)

The Light Duty Utility (LDUA) Cold Test Facility, located in the Hanford 400 Area, will be used to support cold testing (pre- operational tests) of LDUA subsystems. Pre-operational testing is composed of subsystem development testing and rework activities, and integrated system qualification testing. Qualification testing will be conducted once development work is complete and documentation is under configuration control. Operational (hot) testing of the LDUA system will follow the testing covered in this plan and will be covered in a separate test plan

Bennett, K.L.

1995-10-20T23:59:59.000Z

287

National Synchrotron Light Source guidelines for the conduct of operations  

SciTech Connect (OSTI)

This report briefly discusses the following topics: NSLS operations organization and administration; shift routines and operating practices; NSLS control room activities; communications; control of on-shift training; investigation of abnormal events; notifications; control of equipment and system status; lock-out tagout; independent verification; logkeeping; shift turnover; required reading; shift orders; equipment operations guides; operator aid postings; and equipment labeling.

Fewell, N.

1990-03-01T23:59:59.000Z

288

Long Length Contaminated Equipment Retrieval System Receiver Trailer and Transport Trailer Operations and Maintenance Manual  

SciTech Connect (OSTI)

A system to accommodate the removal of long-length contaminated equipment (LLCE) from Hanford underground radioactive waste storage tanks was designed, procured, and demonstrated, via a project activity during the 1990s. The system is the Long Length Contaminated Equipment Removal System (LLCERS). LLCERS will be maintained and operated by Tank Farms Engineering and Operations organizations and other varied projects having a need for the system. The responsibility for the operation and maintenance of the LLCERS Receiver Trailer (RT) and Transport Trailer (TT) resides with the RPP Characterization Project Operations organization. The purpose of this document is to provide vendor supplied operating and maintenance (O & M) information for the RT and TT in a readily retrievable form. This information is provided this way instead of in a vendor information (VI) file to maintain configuration control of the operations baseline as described in RPP-6085, ''Configuration Management Plan for Long Length Contaminated Equipment Receiver and Transport Trailers''. Additional Operations Baseline documents are identified in RPP-6085.

DALE, R.N.

2000-05-01T23:59:59.000Z

289

Independent Oversight Activity Report, Hanford Waste Treatment...  

Broader source: Energy.gov (indexed) [DOE]

Hanford Waste Treatment and Immobilization Plant Engineering Activities and Tank Farm Operations HIAR-HANFORD-2014-01-13 This Independent Oversight Activity Report documents...

290

Independent Oversight Inspection of Environment, Safety, and...  

Broader source: Energy.gov (indexed) [DOE]

Inspection of Environment, Safety, and Health Programs at the Savannah River Operations Office and Savannah River Site, January 2010 Independent Oversight Inspection of...

291

Independent Activity Report, Nevada National Security Site -...  

Broader source: Energy.gov (indexed) [DOE]

- July 2011 July 2011 NNSS Operational Readiness Review of the Joint Actinide Shock Physics Experimental Research Facility HIAR-NNSS-2011-07-28 This Independent Activity...

292

Independent Activity Report, Oak Ridge National Laboratory -...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Oak Ridge National Laboratory - October 2011 Independent Activity Report, Oak Ridge National Laboratory - October 2011 October 2011 Operational Awareness Tour of Building 3525...

293

Independent Oversight Activity Report, Savannah River Site -...  

Office of Environmental Management (EM)

Activity Report, Savannah River Site - February 2014 February 2014 Operational Awareness Visit of the Savannah River Site HIAR-SRS-2014-02-25 This Independent Activity...

294

Independent Activity Report, Portsmouth Gaseous Diffusion Plant...  

Broader source: Energy.gov (indexed) [DOE]

2011 August 2011 Orientation Visit to the Portsmouth Gaseous Diffusion Plant HIAR-PORTS-2011-08-03 This Independent Activity Report documents an operational awareness...

295

Independent Activity Report, Hanford Sludge Treatment Project...  

Broader source: Energy.gov (indexed) [DOE]

Sludge Treatment Project - February 2012 Independent Activity Report, Hanford Sludge Treatment Project - February 2012 February 2012 Hanford Sludge Treatment Project Operational...

296

Independent Oversight Activity Report, Hanford Waste Treatment...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

July 2013 Independent Oversight Activity Report, Hanford Waste Treatment and Immobilization Plant - July 2013 July 2013 Operational Awareness of Waste Treatment and Immobilization...

297

Implementing asyncronous collective operations in a multi-node processing system  

DOE Patents [OSTI]

A method, system, and computer program product are disclosed for implementing an asynchronous collective operation in a multi-node data processing system. In one embodiment, the method comprises sending data to a plurality of nodes in the data processing system, broadcasting a remote get to the plurality of nodes, and using this remote get to implement asynchronous collective operations on the data by the plurality of nodes. In one embodiment, each of the nodes performs only one task in the asynchronous operations, and each nodes sets up a base address table with an entry for a base address of a memory buffer associated with said each node. In another embodiment, each of the nodes performs a plurality of tasks in said collective operations, and each task of each node sets up a base address table with an entry for a base address of a memory buffer associated with the task.

Chen, Dong; Eisley, Noel A.; Heidelberger, Philip; Kumar, Sameer; Salapura, Valentina; Steinmacher-Burow, Burkhard

2014-07-08T23:59:59.000Z

298

Development of automatic operation system for coke oven machines at Yawata Works of Nippon Steel Corporation  

SciTech Connect (OSTI)

The coke plant is a working environment involving heavy dust emissions, high heat and demanding physical labor. The labor-saving operation of the coke plant is an essential issue from the standpoints of not only improvement in working environment, but also reduction in fixed cost by enhancement of labor productivity. Under these circumstances, Nippon Steel has implemented the automation of coke oven machines. The first automatic operation system for coke oven machinery entered service at Oita Works in 1992, followed by the second system at the No. 5 coke oven battery of the coke plant at Yawata Works. The Yawata automatic operation system is characterized by the installation of coke oven machinery to push as many as 140 ovens per day within a short cycle time, such as a preliminary ascension pipe cap opening car and cycle time simulator by the manned operation of the pusher, which is advantageous from the standpoint of investment efficiency, and by the monitoring of other oven machines by the pusher. These measures helped to reduce the manpower requirement to 2 persons per shift from 4 persons per shift. The system entered commercial operation in March, 1994 and has been smoothly working with an average total automatic rate of 97%. Results from the startup to recent operation of the system are reported below.

Matsunaga, Masao; Uematsu, Hiroshi; Nakagawa, Yoji; Ishiharaguchi, Yuji

1995-12-01T23:59:59.000Z

299

Initial operating experience of the 12-MW La Ola photovoltaic system.  

SciTech Connect (OSTI)

The 1.2-MW La Ola photovoltaic (PV) power plant in Lanai, Hawaii, has been in operation since December 2009. The host system is a small island microgrid with peak load of 5 MW. Simulations conducted as part of the interconnection study concluded that unmitigated PV output ramps had the potential to negatively affect system frequency. Based on that study, the PV system was initially allowed to operate with output power limited to 50% of nameplate to reduce the potential for frequency instability due to PV variability. Based on the analysis of historical voltage, frequency, and power output data at 50% output level, the PV system has not significantly affected grid performance. However, it should be noted that the impact of PV variability on active and reactive power output of the nearby diesel generators was not evaluated. In summer 2011, an energy storage system was installed to counteract high ramp rates and allow the PV system to operate at rated output. The energy storage system was not fully operational at the time this report was written; therefore, analysis results do not address system performance with the battery system in place.

Ellis, Abraham; Lenox, Carl (SunPower Corporation, Richmond, CA); Johnson, Jay; Quiroz, Jimmy Edward; Schenkman, Benjamin L.

2011-10-01T23:59:59.000Z

300

Discrete Event Modeling of Algae Cultivation and Harvesting at Commercial Scale: Capital Costs, Operating Costs, and System Bottlenecks  

SciTech Connect (OSTI)

Discrete Event Modeling of Algae Cultivation and Harvesting at Commercial Scale: Capital Costs, Operating Costs, and System Bottlenecks

Lacey, Ph.D, P.E., Ronald E. [Texas A& M University

2012-07-16T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Proposal for the Award of a Contract for Maintenance, Operation and Minor Installation Work for CERN Cooling and HVAC Systems  

E-Print Network [OSTI]

Proposal for the Award of a Contract for Maintenance, Operation and Minor Installation Work for CERN Cooling and HVAC Systems

1996-01-01T23:59:59.000Z

302

Smart Materials Based System Operated at 2K Used as a Superconducting Cavity Tuner for VUV-fel Purpose  

E-Print Network [OSTI]

Smart Materials Based System Operated at 2K Used as a Superconducting Cavity Tuner for VUV-fel Purpose

Sekalski, P; Simrock, S; Albrecht, C; Lilje, L; Bosland, P; Fouaidy, M; Bosotti, A; Paparella, R

2006-01-01T23:59:59.000Z

303

Final environmental impact statement for the construction and operation of an independent spent fuel storage installation to store the Three Mile Island Unit 2 spent fuel at the Idaho National Engineering and Environmental Laboratory. Docket Number 72-20  

SciTech Connect (OSTI)

This Final Environmental Impact Statement (FEIS) contains an assessment of the potential environmental impacts of the construction and operation of an Independent Spent Fuel Storage Installation (ISFSI) for the Three Mile Island Unit 2 (TMI-2) fuel debris at the Idaho National Engineering and Environmental laboratory (INEEL). US Department of Energy-Idaho Operations Office (DOE-ID) is proposing to design, construct, and operate at the Idaho Chemical Processing Plant (ICPP). The TMI-2 fuel debris would be removed from wet storage, transported to the ISFSI, and placed in storage modules on a concrete basemat. As part of its overall spent nuclear fuel (SNF) management program, the US DOE has prepared a final programmatic environmental impact statement (EIS) that provides an overview of the spent fuel management proposed for INEEL, including the construction and operation of the TMI-2 ISFSI. In addition, DOE-ID has prepared an environmental assessment (EA) to describe the environmental impacts associated with the stabilization of the storage pool and the construction/operation of the ISFSI at the ICPP. As provided in NRC`s NEPA procedures, a FEIS of another Federal agency may be adopted in whole or in part in accordance with the procedures outlined in 40 CFR 1506.3 of the regulations of the Council on Environmental Quality (CEQ). Under 40 CFR 1506.3(b), if the actions covered by the original EIS and the proposed action are substantially the same, the agency adopting another agency`s statement is not required to recirculate it except as a final statement. The NRC has determined that its proposed action is substantially the same as actions considered in DOE`s environmental documents referenced above and, therefore, has elected to adopt the DOE documents as the NRC FEIS.

NONE

1998-03-01T23:59:59.000Z

304

Multi-unit Operations in Non-Nuclear Systems: Lessons Learned for Small Modular Reactors  

SciTech Connect (OSTI)

The nuclear-power community has reached the stage of proposing advanced reactor designs to support power generation for decades to come. Small modular reactors (SMRs) are one approach to meet these energy needs. While the power output of individual reactor modules is relatively small, they can be grouped to produce reactor sites with different outputs. Also, they can be designed to generate hydrogen, or to process heat. Many characteristics of SMRs are quite different from those of current plants and may be operated quite differently. One difference is that multiple units may be operated by a single crew (or a single operator) from one control room. The U.S. Nuclear Regulatory Commission (NRC) is examining the human factors engineering (HFE) aspects of SMRs to support licensing reviews. While we reviewed information on SMR designs to obtain information, the designs are not completed and all of the design and operational information is not yet available. Nor is there information on multi-unit operations as envisioned for SMRs available in operating experience. Thus, to gain a better understanding of multi-unit operations we sought the lesson learned from non-nuclear systems that have experience in multi-unit operations, specifically refineries, unmanned aerial vehicles and tele-intensive care units. In this paper we report the lessons learned from these systems and the implications for SMRs.

OHara J. M.; Higgins, J.; DAgostino, A.

2012-01-17T23:59:59.000Z

305

Operational control and maintenance integrity of typical and atypical coil tube steam generating systems  

SciTech Connect (OSTI)

Coil tube steam generators are low water volume to boiler horsepower (bhp) rating, rapid steaming units which occupy substantially less space per boiler horsepower than equivalent conventional tire tube and water tube boilers. These units can be retrofitted into existing steam systems with relative ease and are more efficient than the generators they replace. During the early 1970's they became a popular choice for steam generation in commercial, institutional and light to medium industrial applications. Although these boiler designs do not require skilled or certified operators, an appreciation for a number of the operational conditions that result in lower unscheduled maintenance, increased reliability and availability cycles would be beneficial to facility owners, managers, and operators. Conditions which afford lower operating and maintenance costs will be discussed from a practical point of view. An overview of boiler design and operation is also included. Pitfalls are provided for operational and idle conditions. Water treatment application, as well as steam system operations not conducive to maintaining long term system integrity; with resolutions, will be addressed.

Beardwood, E.S.

1999-07-01T23:59:59.000Z

306

Operating the Irish Power System with Increased Levels of Wind Power  

E-Print Network [OSTI]

Operating the Irish Power System with Increased Levels of Wind Power Aidan Tuohy, Student Member-- This paper summarises some of the main impacts of large amounts of wind power installed in the island of Ireland. Using results from various studies performed on this system, it is shown that wind power

307

Transportation Services Fueling Operation Transportation Services has installed a software system that will facilitate fueling of  

E-Print Network [OSTI]

Transportation Services Fueling Operation Transportation Services has installed a software system into this system. All University vehicles that wish to fuel at UH M noa Transportation Services will be required the application below and submit your application to Transportation Services before attempting to fuel your

308

SPAM: A Microcode Based Tool for Tracing Operating System Events Stephen W. Melvin  

E-Print Network [OSTI]

modifications to a VAX 8600, that traces operating system events as a sideeffect to normal execution. This trace System Performance Analysis using Microcode). It is based on microcode modifications to a VAX 8600 which instruction counts, microsecond counts, processor mode and process and user IDS. Because the VAX architecture

Patt, Yale

309

Description and operating procedure for magma characterization data acquisition and control system  

SciTech Connect (OSTI)

A computerized data acquisition and control system used in a Sandia National Laboratories' facility for molten rock (magma) and metallurgical pressure bonding experiments is described. The system is based on a Hewlett-Packard 9826A Desktop Computer and a Hewlett-Packard 3497A Data Acquisition/Control Unit. Operating procedures are included, and detailed instructions for implementing the procedures are given.

Woodward, M H

1982-04-01T23:59:59.000Z

310

Tank 241-C-106 in-tank imaging system operational test report  

SciTech Connect (OSTI)

This document presents the results of operational testing of the 241-C-106 In-Tank Video Camera Imaging System. This imaging system was installed as a component of Project W-320 to monitor sluicing and waste retrieval activities in Tank 241-C-106.

Pedersen, L.T.

1998-07-07T23:59:59.000Z

311

Columbia River System Operation Review : Final Environmental Impact Statement, Main Report Exhibits.  

SciTech Connect (OSTI)

This Volume is a part of the Final Environmental Impact Statement (EIS) for the Columbia River System. This volume contains technical exhibits of cultural resources and commentary on the (System Operation Review) SOR process. The Confederated Tribes of the Umatilla Indian Reservation comment is the majority of the material in the volume, in the Consultation Plan, Identification of trust resources; Criteria for the selection of a System Operating Strategy; comment on rights protection and implementation of Federal Trust responsibility; analysis of the draft EIS. Comment by other Native American Tribes and groups is also included: Confederated Tribes of the Colville Reservation; Kootenai Tribe of Idaho; Spokane Tribe of Indians; Coeur d` Alene tribe.

Columbia River System Operation Review (U.S.)

1995-11-01T23:59:59.000Z

312

OPTIMAL DESIGN AND OPERATION OF HELIUM REFRIGERATION SYSTEMS USING THE GANNI CYCLE  

SciTech Connect (OSTI)

The constant pressure ratio process, as implemented in the floating pressure - Ganni cycle, is a new variation to prior cryogenic refrigeration and liquefaction cycle designs that allows for optimal operation and design of helium refrigeration systems. This cycle is based upon the traditional equipment used for helium refrigeration system designs, i.e., constant volume displacement compression and critical flow expansion devices. It takes advantage of the fact that for a given load, the expander sets the compressor discharge pressure and the compressor sets its own suction pressure. This cycle not only provides an essentially constant system Carnot efficiency over a wide load range, but invalidates the traditional philosophy that the (TS) design condition is the optimal operating condition for a given load using the as-built hardware. As such, the Floating Pressure- Ganni Cycle is a solution to reduce the energy consumption while increasing the reliability, flexibility and stability of these systems over a wide operating range and different operating modes and is applicable to most of the existing plants. This paper explains the basic theory behind this cycle operation and contrasts it to the traditional operational philosophies presently used.

Venkatarao Ganni, Peter Knudsen

2010-04-01T23:59:59.000Z

313

Method and apparatus for operating a powertrain system upon detecting a stuck-closed clutch  

DOE Patents [OSTI]

A powertrain system includes a multi-mode transmission having a plurality of torque machines. A method for controlling the powertrain system includes identifying all presently applied clutches including commanded applied clutches and the stuck-closed clutch upon detecting one of the torque-transfer clutches is in a stuck-closed condition. A closed-loop control system is employed to control operation of the multi-mode transmission accounting for all the presently applied clutches.

Hansen, R. Anthony

2014-02-18T23:59:59.000Z

314

The new Kaiserstuhl coking plant: The heating system -- Design, construction and initial operating experience  

SciTech Connect (OSTI)

At the end of 1992 the new coke plant Kaiserstuhl in Dortmund/Germany with presently the largest coke ovens world-wide started its production operation in close linkage to the Krupp-Hoesch Metallurgical Works after about 35 months construction time. This plant incorporating comprehensive equipment geared to improve environmental protection is also considered as the most modern coke plant of the world. The heating-system and first results of operation will be presented.

Strunk, J.

1996-12-31T23:59:59.000Z

315

Operating cost guidelines for benchmarking DOE thermal treatment systems for low-level mixed waste  

SciTech Connect (OSTI)

This report presents guidelines for estimating operating costs for use in benchmarking US Department of Energy (DOE) low-level mixed waste thermal treatment systems. The guidelines are based on operating cost experience at the DOE Toxic Substances Control Act (TSCA) mixed waste incinerator at the K-25 Site at Oak Ridge. In presenting these guidelines, it should be made clear at the outset that it is not the intention of this report to present operating cost estimates for new technologies, but only guidelines for estimating such costs.

Salmon, R.; Loghry, S.L.; Hermes, W.H.

1994-11-01T23:59:59.000Z

316

Guide to good practices for independent verification  

SciTech Connect (OSTI)

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Independent Verification, Chapter X of Department of Energy (DOE) Order 5480.19, ``Conduct of Operations Requirements for DOE Facilities.`` The practices in this guide should be considered when planning or reviewing independent verification activities. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. ``Independent Verification`` is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for coordinated independent verification activities to promote safe and efficient operations.

Not Available

1993-06-01T23:59:59.000Z

317

Guide to good practices for independent verification  

SciTech Connect (OSTI)

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Independent Verification, Chapter X of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities.'' The practices in this guide should be considered when planning or reviewing independent verification activities. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Independent Verification'' is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for coordinated independent verification activities to promote safe and efficient operations.

Not Available

1993-06-01T23:59:59.000Z

318

Guide to good practices for independent verification  

SciTech Connect (OSTI)

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Independent Verification, Chapter X of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing independent verification activities. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Independent Verification is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for coordinated independent verification activities to promote safe and efficient operations.

NONE

1998-12-01T23:59:59.000Z

319

Application of LBB to high energy piping systems in operating PWR  

SciTech Connect (OSTI)

The amendment to General Design Criterion 4 allows exclusion, from the design basis, of dynamic effects associated with high energy pipe rupture by application of leak-before-break (LBB) technology. This new approach has resulted in substantial financial savings to utilities when applied to the Pressurized Water Reactor (PWR) primary loop piping and auxiliary piping systems made of stainless steel material. To date majority of applications pertain to piping systems in operating plants. Various steps of evaluation associated with the LBB application to an operating plant are described in this paper.

Swamy, S.A.; Bhowmick, D.C. [Westinghouse Nuclear Technology Division, Pittsburgh, PA (United States)

1997-04-01T23:59:59.000Z

320

High speed hydraulically-actuated operating system for an electric circuit breaker  

DOE Patents [OSTI]

This hydraulically-actuated operating system comprises a cylinder, a piston movable therein in an opening direction to open a circuit breaker, and an accumulator for supplying pressurized liquid to a breaker-opening piston-actuating space within the cylinder. A normally-closed valve between the accumulator and the actuating space is openable to allow pressurized liquid from the accumulator to flow through the valve into the actuating space to drive the piston in an opening direction. A dashpotting mechanism operating separately from the hydraulic actuating system is provided, thereby reducing flow restriction interference with breaker opening. 3 figs.

Iman, I.

1983-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Operation Diagnosis for Buildings Connecting Building Management Systems with Energy Management Systems  

E-Print Network [OSTI]

Reducing energy consumption of buildings is a good contribution to protect the environment and to reduce costs. The first and most important step to operate a building most efficiently is to make aware of most of the technical parameters. Connecting...

Mehler, G.

2008-01-01T23:59:59.000Z

322

Contractions of product density operators of systems of identical fermions and bosons  

E-Print Network [OSTI]

Recurrence and explicit formulae for contractions (partial traces) of antisymmetric and symmetric products of identical trace class operators are derived. Contractions of product density operators of systems of identical fermions and bosons are proved to be asymptotically equivalent to, respectively, antisymmetric and symmetric products of density operators of a single particle, multiplied by a normalization integer. The asymptotic equivalence relation is defined in terms of the thermodynamic limit of expectation values of observables in the states represented by given density operators. For some weaker relation of asymptotic equivalence, concerning the thermodynamic limit of expectation values of product observables, normalized antisymmetric and symmetric products of density operators of a single particle are shown to be equivalent to tensor products of density operators of a single particle. This paper presents the results of a part of the author's thesis [W. Radzki, "Kummer contractions of product density matrices of systems of $n$ fermions and $n$ bosons" (Polish), MS thesis, Institute of Physics, Nicolaus Copernicus University, Toru\\'{n}, 1999].

Wiktor Radzki

2008-10-25T23:59:59.000Z

323

Independent Activity Report, Pantex Plant - October 2011 | Department...  

Broader source: Energy.gov (indexed) [DOE]

Plant Operational Awareness Site Visit HIAR PTX-2011-10-28 This Independent Activity Report documents an operational awareness activity conducted by Office of Health, Safety and...

324

Impact of dispersed solar and wind systems on electric distribution planning and operation  

SciTech Connect (OSTI)

Small-scale dispersed solar photovoltaic and wind generation (DSW) will affect the generation, transmission, and distribution systems of an electric utility. This study examines the technical and economic impacts of dispersing DSW devices within the distribution system. Dispersed intermittent generation is included. Effects of DSW devices on capital investments, reliability, operating and maintenance costs, protection requirements, and communication and control requirements are examined. A DSW operation model is developed to help determine the dependable capacity of fluctuating solar photovoltaic and wind generation as part of the distribution planning process. Specific case studies using distribution system data and renewable resource data for Southern California Edison Company and Consumers Power Company are analyzed to gain insights into the effects of interconnecting DSW devices. The DSW devices were found to offer some distribution investment savings, depending on their availability during peak loads. For a summer-peaking utility, for example, dispersing photovoltaic systems is more likely to defer distribution capital investments than dispersing wind systems. Dispersing storage devices to increase DSW's dependable capacity for distribution systems needs is not economically attractive. Substation placement of DSW and storage devices is found to be more cost effective than feeder or customer placement. Examination of the effects of DSW on distribution system operation showed that small customer-owned DSW devices are not likely to disrupt present time-current distribution protection coordination. Present maintenance work procedures, are adequate to ensure workmen's safety. Regulating voltages within appropriate limits will become more complex with intermittent generation along the distribution feeders.

Boardman, R.W.; Patton, R.; Curtice, D.H.

1981-02-01T23:59:59.000Z

325

Utility FGD Survey, January--December 1989. Volume 2, Design performance data for operating FGD systems, Part 1  

SciTech Connect (OSTI)

The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

Hance, S.L.; McKibben, R.S.; Jones, F.M. [IT Corp., Cincinnati, OH (United States)

1992-03-01T23:59:59.000Z

326

Post-Retrocommissioning HVAC Operations Monitoring Using Enterprise-Wide energy Management System  

E-Print Network [OSTI]

Post-retrocommissioning HVAC Operations Monitoring Using Enterprise-wide Energy Management System Narendra Amarnani Project Manager Brian Roberts Section Manager County of Los Angeles ISD Los Angeles, California, USA Howard Choy... earned a graduate degree from Cal Poly University, Pomona. He is a Certified Energy Manager, a LEED AP, and a Certified Energy Plan Examiner. Brians is the Section Manager of the Systems Section within Energy Management Division. His...

Amarnani, N.; Roberts, B.; Choy, H.

2007-01-01T23:59:59.000Z

327

An Operational Energy Consumption Evaluation Index System for Large Public Buildings  

E-Print Network [OSTI]

ICEBO2006, Shenzhen, China Building Commissioning for Energy Efficiency and Comfort Vol.VII-2-2 An Operational Energy Consumption Evaluation Index System for Large Public Buildings1..., indexes system 1. PREFACE With the continuous development of urbanization level, the lack of energy and the increasing of society?s requirement for energy has become one of the prominent contradictions restricting the development of society...

Li, Y.; Zhang, J.; Sun, D.

2006-01-01T23:59:59.000Z

328

Cost Optimal Operation of Thermal Energy Storage System with Real-Time Prices  

E-Print Network [OSTI]

Cost Optimal Operation of Thermal Energy Storage System with Real-Time Prices Toru Kashima, Member of the result [4]. The same can be said for time varying real-time prices. Real-time energy pricing is not yet such as chillers. Energy resources such as electricity or natural gas are bought from suppliers at certain prices

329

Opportunities for Sustainable Design and Operation of Clean Spaces: A Case Study on Minienvironment System Performance  

E-Print Network [OSTI]

opportunities in efficient energy end-use and wise allocation of resources associated with processesLBNL-56312 Opportunities for Sustainable Design and Operation of Clean Spaces: A Case Study on Minienvironment System Performance Tengfang Xu 1. Background In order to identify and pursue energy efficiency

330

Heat-and-Run: Leveraging SMT and CMP to Manage Power Density Through the Operating System  

E-Print Network [OSTI]

Heat-and-Run: Leveraging SMT and CMP to Manage Power Density Through the Operating System Mohamed and thermal ability of packages to dissipate heat. Power den- sity is characterized by localized chip hot Performance, Reliability Keywords Power density, heat, CMP, SMT, migration 1 INTRODUCTION Power

Vijaykumar, T. N.

331

CRAD, Conduct of Operations- Office of River Protection K Basin Sludge Waste System  

Broader source: Energy.gov [DOE]

A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a May 2004 assessment of the Conduct of Operations program at the Office of River Protection, K Basin Sludge Waste System.

332

Routine based OS-aware Microprocessor Resource Adaptation for Run-time Operating System Power Saving  

E-Print Network [OSTI]

workloads (see section 2 for detail), making it a major power consumer. The proportion of the OS power, such as thermal sensor reading, energy accounting and power control for memory and I/O devices [2]. ClearlyRoutine based OS-aware Microprocessor Resource Adaptation for Run-time Operating System Power

John, Lizy Kurian

333

Exploration of Process Interaction in Operating Systems: A Pipe-Fork Simulator  

E-Print Network [OSTI]

Exploration of Process Interaction in Operating Systems: A Pipe-Fork Simulator Steven Robbins- structors to trace through a variety of programs and to show how the processes and pipes are connected scheduling affect the configuration of the processes and pipes as well as the output of the program. Students

Robbins, Steven

334

Operating Systems Should Manage Accelerators Sankaralingam Panneerselvam and Michael M. Swift  

E-Print Network [OSTI]

Operating Systems Should Manage Accelerators Sankaralingam Panneerselvam and Michael M. Swift The inexorable demand for computing power has lead to increas- ing interest in accelerator-based designs. An accelerator is spe- cialized hardware unit that can perform a set of tasks with much higher performance

Swift, Michael

335

Solar heating and cooling of residential buildings: sizing, installation and operation of systems. 1980 edition  

SciTech Connect (OSTI)

This manual was prepared as a text for a training course on solar heating and cooling of residential buildings. The course and text are directed toward sizing, installation, operation, and maintenance of solar systems for space heating and hot water supply, and solar cooling is treated only briefly. (MHR)

None

1980-09-01T23:59:59.000Z

336

Operability test report for rotary mode core sampling system number 3  

SciTech Connect (OSTI)

This report documents the successful completion of operability testing for the Rotary Mode Core Sampling (RMCS) system {number_sign}3. The Report includes the test procedure (WHC-SD-WM-OTP-174), exception resolutions, data sheets, and a test report summary.

Corbett, J.E.

1996-03-01T23:59:59.000Z

337

Design and Operation of a Drill-In-Casing System (DIC) Timothy J.G. Francis  

E-Print Network [OSTI]

Philip D Director U/r Design and Operation of a Drill-In-Casing System (DIC) Timothy J.G. Francis by Joint Oceanographic Institutions, Inc., under contract with the National Science Foundation. Funding Foundation (United States) Natural Environment Research Council (United Kingdom) Any opinions, findings

338

Annals of Operations Research 59(1995)99-133 99 SOCRATES: A system for scheduling  

E-Print Network [OSTI]

Annals of Operations Research 59(1995)99-133 99 SOCRATES: A system for scheduling hydroelectric (PG&E) is one of the largest producers of hydroelectricity among American investor-owned utilities. PG of the hydroelectricity used in Northern California. A number of other entities also own hydroelectric facilities

Morton, David

339

Smart Operations of Air-Conditioning and Lighting Systems in Government Buildings for Peak Power Reduction  

E-Print Network [OSTI]

During the summer 2007 smart operation strategies for air-conditioning (A/C) and lighting systems were developed and tested in a number of governmental buildings in Kuwait as one of the solutions to reduce the national peak demand for electrical...

Al-Hadban, Y.; Maheshwari, G. P.; Al-Nakib, D.; Al-Mulla, A.; Alasseri, R.

340

Every Joule is Precious: The Case for Revisiting Operating System Design for Energy Efficiency  

E-Print Network [OSTI]

Every Joule is Precious: The Case for Revisiting Operating System Design for Energy Efficiency Amin, it is important to develop low-level mechanisms and higher- level policies to maximize energy efficiency and implementation from the point of view of energy efficiency rather than the more traditional OS metric

Vahdat, Amin

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Title of Thesis: HARDWARE SUPPORT FOR REAL-TIME OPERATING SYSTEMS  

E-Print Network [OSTI]

: Paul Kohout Degree and year: Master of Science, 2002 Thesis directed by: Professor Bruce L. Jacob bottlenecks. #12;HARDWARE SUPPORT FOR REAL-TIME OPERATING SYSTEMS by Paul James Kohout Thesis submitted Professor Gang Qu Professor David B. Stewart #12;©Copyright by Paul James Kohout 2002 #12;ii

Jacob, Bruce

342

A PI-based control structure as an operating system scheduler  

E-Print Network [OSTI]

A PI-based control structure as an operating system scheduler Martina Maggio, Federico Terraneo, entirely composed of a PI-based control structure. The proposed scheduler is experimented with in several.e., not control-based) policy optimised for that condition, as long as design assumptions such as schedulability

Como, Giacomo

343

Development and operation of a photovoltaic power system for use at remote Antarctic sites  

SciTech Connect (OSTI)

A photovoltaic power system, designed and built at the NASA Lewis Research Center, has successfully operated over the past two summer seasons at a remote site in Antarctica, providing utility-type power for a six-person field team. The system was installed at the Lake Hoare site for approximately five weeks during late 1992, put into storage for the Antarctic winter, and then used again during the 1993 season. The photovoltaic power system consists of three silicon photovoltaic sub-arrays delivering a total of 1.5 kWe peak power, three lead-acid gel battery modules supplying 2.4 kWh, and an electrical distribution system which delivers 120 Vac and 12 Vdc to the user. The system worked extremely well in providing quiet, reliable power. The experience gained from early system demonstrations such as this should be beneficial in accelerating the transition toward future PV systems in Antarctica and other similar areas.

Piszczor, M.F.; Kohout, L.L.; Manzo, M. [National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center; Colozza, A.J. [NYMA, Brook Park, OH (United States)

1994-12-31T23:59:59.000Z

344

Wind Energy Management System Integration Project Incorporating Wind Generation and Load Forecast Uncertainties into Power Grid Operations  

SciTech Connect (OSTI)

The power system balancing process, which includes the scheduling, real time dispatch (load following) and regulation processes, is traditionally based on deterministic models. Since the conventional generation needs time to be committed and dispatched to a desired megawatt level, the scheduling and load following processes use load and wind power production forecasts to achieve future balance between the conventional generation and energy storage on the one side, and system load, intermittent resources (such as wind and solar generation) and scheduled interchange on the other side. Although in real life the forecasting procedures imply some uncertainty around the load and wind forecasts (caused by forecast errors), only their mean values are actually used in the generation dispatch and commitment procedures. Since the actual load and intermittent generation can deviate from their forecasts, it becomes increasingly unclear (especially, with the increasing penetration of renewable resources) whether the system would be actually able to meet the conventional generation requirements within the look-ahead horizon, what the additional balancing efforts would be needed as we get closer to the real time, and what additional costs would be incurred by those needs. In order to improve the system control performance characteristics, maintain system reliability, and minimize expenses related to the system balancing functions, it becomes necessary to incorporate the predicted uncertainty ranges into the scheduling, load following, and, in some extent, into the regulation processes. It is also important to address the uncertainty problem comprehensively, by including all sources of uncertainty (load, intermittent generation, generators forced outages, etc.) into consideration. All aspects of uncertainty such as the imbalance size (which is the same as capacity needed to mitigate the imbalance) and generation ramping requirement must be taken into account. The latter unique features make this work a significant step forward toward the objective of incorporating of wind, solar, load, and other uncertainties into power system operations. In this report, a new methodology to predict the uncertainty ranges for the required balancing capacity, ramping capability and ramp duration is presented. Uncertainties created by system load forecast errors, wind and solar forecast errors, generation forced outages are taken into account. The uncertainty ranges are evaluated for different confidence levels of having the actual generation requirements within the corresponding limits. The methodology helps to identify system balancing reserve requirement based on a desired system performance levels, identify system breaking points, where the generation system becomes unable to follow the generation requirement curve with the user-specified probability level, and determine the time remaining to these potential events. The approach includes three stages: statistical and actual data acquisition, statistical analysis of retrospective information, and prediction of future grid balancing requirements for specified time horizons and confidence intervals. Assessment of the capacity and ramping requirements is performed using a specially developed probabilistic algorithm based on a histogram analysis incorporating all sources of uncertainty and parameters of a continuous (wind forecast and load forecast errors) and discrete (forced generator outages and failures to start up) nature. Preliminary simulations using California Independent System Operator (California ISO) real life data have shown the effectiveness of the proposed approach. A tool developed based on the new methodology described in this report will be integrated with the California ISO systems. Contractual work is currently in place to integrate the tool with the AREVA EMS system.

Makarov, Yuri V.; Huang, Zhenyu; Etingov, Pavel V.; Ma, Jian; Guttromson, Ross T.; Subbarao, Krishnappa; Chakrabarti, Bhujanga B.

2010-09-01T23:59:59.000Z

345

Independent electrons model for open quantum systems: Landauer-Buettiker formula and strict positivity of the entropy production  

E-Print Network [OSTI]

A general argument leading from the formula for currents through an open noninteracting mesoscopic system given by the theory of non-equilibrium steady states (NESS) to the Landauer-Buettiker formula is pointed out. Time reversal symmetry is not assumed. As a consequence it follows that, as far as the system has a nontrivial scattering theory and the reservoirs have different temperatures and/or chemical potentials, the entropy production is strictly positive.

G. Nenciu

2006-10-26T23:59:59.000Z

346

Flexible Solar-Energy Harvesting System on Plastic with Thin-film LC Oscillators Operating Above ft for  

E-Print Network [OSTI]

Flexible Solar-Energy Harvesting System on Plastic with Thin-film LC Oscillators Operating Above ft- This paper presents an energy-harvesting system consisting of amorphous-silicon (a-Si) solar cells and thin of the energy-harvesting system. The solar module consists of solar cells in series operating at an output

347

Development and evaluation of operational strategies for providing an integrated diamond interchange ramp-metering control system  

E-Print Network [OSTI]

. Therefore, there is a lack of both analysis tools and operational strategies for considering them as an integrated system. One drawback of operating the ramp-metering system and the diamond interchange system in isolation is that traffic from the ramp...

Tian, Zongzhong

2004-09-30T23:59:59.000Z

348

Evaluation of a solar intermittent refrigeration system for ice production operating with ammonia/lithium nitrate  

SciTech Connect (OSTI)

A novel solar intermittent refrigeration system for ice production developed in the Centro de Investigacion en Energia of the Universidad Nacional Autonoma de Mexico is presented. The system operates with the ammonia/lithium nitrate mixture. The system developed has a nominal capacity of 8 kg of ice/day. It consists of a cylindrical parabolic collector acting as generator-absorber. Evaporator temperatures as low as -11 C were obtained for several hours with solar coefficients of performance up to 0.08. It was found that the coefficient of performance increases with the increment of solar radiation and the solution concentration. A dependency of the coefficient of performance was not founded against the cooling water temperature. Also it was found that the maximum operating pressure increases meanwhile the generation temperature decreases with an increase of the solution concentration. (author)

Rivera, W.; Moreno-Quintanar, G.; Best, R. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, A.P. 34, 62580 Temixco, Mor. (Mexico); Rivera, C.O.; Martinez, F. [Facultad de Ingenieria Campus Coatzacoalcos, Universidad Veracruzana, Av. Universidad Km 7.5, 96530 Coatzacoalcos, Ver. (Mexico)

2011-01-15T23:59:59.000Z

349

DEVELOPMENT, INSTALLATION AND OPERATION OF THE MPC&A OPERATIONS MONITORING (MOM) SYSTEM AT THE JOINT INSTITUTE FOR NUCLEAR RESEARCH (JINR) DUBNA, RUSSIA  

SciTech Connect (OSTI)

The Material Protection, Control and Accounting (MPC&A) Operations Monitoring (MOM) systems handling at the International Intergovernmental Organization - Joint Institute for Nuclear Research (JINR) is described in this paper. Category I nuclear material (plutonium and uranium) is used in JINR research reactors, facilities and for scientific and research activities. A monitoring system (MOM) was installed at JINR in April 2003. The system design was based on a vulnerability analysis, which took into account the specifics of the Institute. The design and installation of the MOM system was a collaborative effort between JINR, Brookhaven National Laboratory (BNL) and the U.S. Department of Energy (DOE). Financial support was provided by DOE through BNL. The installed MOM system provides facility management with additional assurance that operations involving nuclear material (NM) are correctly followed by the facility personnel. The MOM system also provides additional confidence that the MPC&A systems continue to perform effectively.

Kartashov,V.V.; Pratt,W.; Romanov, Y.A.; Samoilov, V.N.; Shestakov, B.A.; Duncan, C.; Brownell, L.; Carbonaro, J.; White, R.M.; Coffing, J.A.

2009-07-12T23:59:59.000Z

350

Role of Pumped Storage Hydro Resources in Electricity Markets and System Operation: Preprint  

SciTech Connect (OSTI)

The most common form of utility- sized energy storage system is the pumped storage hydro system. Originally, these types of storage systems were economically viable simply because they displace more expensive generating units. However, over time, as those expensive units became more efficient and costs declined, pumped hydro storage units no longer have the operational edge. As a result, in the current electricity market environment, pumped storage hydro plants are struggling. To offset this phenomenon, certain market modifications should be addressed. This paper will introduce some of the challenges faced by pumped storage hydro plants in today's markets and purpose some solutions to those problems.

Ela, E.; Kirby, B.; Botterud, A.; Milostan, C.; Krad, I.; Koritarov, V.

2013-05-01T23:59:59.000Z

351

Sustainable Forward Operating Base Nuclear Power Evaluation (Relationship Mapping System) Users Manual  

SciTech Connect (OSTI)

The Sustainable Forward Operating Base (FOB) Nuclear Power Evaluation was developed by the Idaho National Laboratory Systems Engineering Department to support the Defense Advanced Research Projects Agency (DARPA) in assessing and demonstrating the viability of deploying small-scale reactors in support of military operations in theatre. This document provides a brief explanation of how to access and use the Sustainable FOB Nuclear Power Evaluation utility to view assessment results as input into developing and integrating the program elements needed to create a successful demonstration.

Not Listed

2012-01-01T23:59:59.000Z

352

Operable Unit 3-13, Group 7, SFE-20 Hot Waste Tank System Remedial Action Request  

SciTech Connect (OSTI)

This Remedial Action Report summarizes activities undertaken to remediate the Operable Unit 3-13, Group 7, SFE-20 Hot Waste Tank System at the Idaho Nuclear Technology and Engineering Center at the Idaho National Laboratory Site. The site addressed in this report was defined in the Operable Unit 3-13 Record of Decision and subsequent implementing documents. This report concludes that remediation requirements and cleanup goals established for the site have been accomplished and is hereafter considered a No Further Action site.

L. Davison

2009-06-30T23:59:59.000Z

353

Operable Unit 3-13, Group 7, SFE-20 Hot Waste Tank System Remedial Action Report  

SciTech Connect (OSTI)

This Remedial Action Report summarizes activities undertaken to remediate the Operable Unit 3-13, Group 7, SFE-20 Hot Waste Tank System at the Idaho Nuclear Technology and Engineering Center at the Idaho National Laboratory Site. The site addressed in this report was defined in the Operable Unit 3-13 Record of Decision and subsequent implementing documents. This report concludes that remediation requirements and cleanup goals established for the site have been accomplished and is hereafter considered a No Further Action site.

Lee Davison

2009-06-30T23:59:59.000Z

354

Continuous Energy Management of the HVAC&R System in an Office Building System Operation and Energy Consumption for the Eight Years after Building Completion  

E-Print Network [OSTI]

The authors continuously studied the energy consumption of a heating, ventilating, air- conditioning and refrigerating (HVAC&R) system in an office for the operation of the system in terms of its expected performance. A fault in the system control...

Akashi, Y.; Shinozaki, M.; Kusuda, R.; Ito, S.

2006-01-01T23:59:59.000Z

355

Methodology for design, calibration, system identification and operation of an experimental Hvac system.  

E-Print Network [OSTI]

??It is well known that building control systems rarely function as designed, contributing to excessive energy use and poor environmental control performance. In addition, most (more)

Cui, Li

2013-01-01T23:59:59.000Z

356

System and method of cylinder deactivation for optimal engine torque-speed map operation  

DOE Patents [OSTI]

This disclosure provides a system and method for determining cylinder deactivation in a vehicle engine to optimize fuel consumption while providing the desired or demanded power. In one aspect, data indicative of terrain variation is utilized in determining a vehicle target operating state. An optimal active cylinder distribution and corresponding fueling is determined from a recommendation from a supervisory agent monitoring the operating state of the vehicle of a subset of the total number of cylinders, and a determination as to which number of cylinders provides the optimal fuel consumption. Once the optimal cylinder number is determined, a transmission gear shift recommendation is provided in view of the determined active cylinder distribution and target operating state.

Sujan, Vivek A; Frazier, Timothy R; Follen, Kenneth; Moon, Suk-Min

2014-11-11T23:59:59.000Z

357

LU transformation invariant operators and LU transformation invariant  

E-Print Network [OSTI]

We proposed a concept of LU transformation invariant operators. By using this operator, arbitrary multi-qubit states LU transformation invariant and SLOCC invariant could be easily obtained. And we find that presences two kinds of invariant operators and corresponding invariants. One kind of operators yields LU invariants and the other operators results in SLOCC invariants. For three-qubit states, all independence LU transformation invariant are obtained. Furthermore, by this system method, arbitrary multi-qubit states invariants can be given.

Xin-wei Zha; Chun-min Zhang

2007-02-06T23:59:59.000Z

358

Extended space expectation values of position related operators for hydrogen-like quantum system evolutions  

SciTech Connect (OSTI)

The expectation value definitions over an extended space from the considered Hilbert space of the system under consideration is given in another paper of the second author in this symposium. There, in that paper, the conceptuality rather than specification is emphasized on. This work uses that conceptuality to investigate the time evolutions of the position related operators' expectation values not in its standard meaning but rather in a new version of the definition over not the original Hilbert space but in the space obtained by extensions via introducing the images of the given initial wave packet under the positive integer powers of the system Hamiltonian. These images may not be residing in the same space of the initial wave packet when certain singularities appear in the structure of the system Hamiltonian. This may break down the existence of the integrals in the definitions of the expectation values. The cure is the use of basis functions in the abovementioned extended space and the sandwiching of the target operator whose expectation value is under questioning by an appropriately chosen operator guaranteeing the existence of the relevant integrals. Work specifically focuses on the hydrogen-like quantum systems whose Hamiltonians contain a polar singularity at the origin.

Kalay, Berfin; Demiralp, Metin [?stanbul Technical University, Informatics Institute, Maslak, 34469, ?stanbul (Turkey)

2014-10-06T23:59:59.000Z

359

Design and Application of an Electronic Logbook for Space System Integration and Test Operations  

SciTech Connect (OSTI)

In the highly technological aerospace world paper is still widely used to document space system integration and test (I&T) operations. E-Logbook is a new technology designed to substitute the most commonly used paper logbooks in space system I&T, such as the connector mate/demate logbook, the flight hardware and flight software component installation logbook, the material mix record logbook and the electronic ground support equipment validation logbook. It also includes new logbook concepts, such as the shift logbook, which optimizes management oversight and the shift hand-over process, and the configuration logbook, which instantly reports on the global I&T state of the space system before major test events or project reviews. The design of E-Logbook focuses not only on a reliable and efficient relational database, but also on an ergonomic human-computer interactive (HCI) system that can help reduce human error and improve I&T management and oversight overall. E-Logbook has been used for the I&T operation of the Gamma-ray Large Area Space Telescope (GLAST) Large Area Telescope (LAT) at the Stanford Linear Accelerator Center (SLAC). More than 41,000 records have been created for the different I&T logbooks, with no data having been corrupted or critically lost. 94% of the operators and 100% of the management exposed to E-Logbook prefer it to paper logbooks and recommend its use in the aerospace industry.

Kavelaars, Alicia T.; /SLAC /Stanford U., Dept. Aeronaut. Astronaut.; ,

2006-10-10T23:59:59.000Z

360

Columbia River System Operation Review : Final Environmental Impact Statement, Appendix R: Pacific Northwest Coordination agreement (PNCA).  

SciTech Connect (OSTI)

Currently, the Federal government coordinates the planning and operation of the Federal Columbia River Power System (FCRPS) with projects owned and operated by the region`s non-Federal hydrogenerating utilities pursuant to the Pacific North-west Coordination Agreement (PNCA). The Bureau of Reclamation (Reclamation), the Corps of Engineers (Corps), and the Bonneville Power Administration (BPA) are parties to the PNCA on behalf of the government of the United States. The PNCA is a complex agreement that provides an opportunity for the region`s power producers to maximize the power system`s reliability and economy while meeting their multiple-use objectives. The PNCA does not dictate the operation of the resources it coordinates. It is essentially an accounting mechanism that exchanges the power produced among the parties in order to improve the reliability of the system and reduce regional power costs. Project owners retain complete autonomy to operate as needed to meet their multiple-use requirements. The PNCA was executed in 1964 as an important component of regional plans to maximize the Northwest`s hydro resource capability. Maximization also included the development of storage projects on the Columbia River in Canada pursuant to the terms of the 1964 Columbia River Treaty. Because of the link between power coordination and Treaty issues, the current parties to the PNCA, currently are contemplating entering into a replacement or renewed power coordination agreement. Because the power coordination agreement is a consensual arrangement, its ultimate provisions must be acceptable to all of its signatories. This Appendix R to the Final Environmental Impact Statement of the Columbia River System is a presentation of the Pacific North-west Coordination Agreement.

Columbia River System Operation Review (U.S.)

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Automatic coke oven heating control system at Burns Harbor for normal and repair operation  

SciTech Connect (OSTI)

An automatic heating control system for coke oven batteries was developed in 1985 for the Burns Harbor No. 1 battery and reported in the 1989 Ironmaking Conference Proceedings. The original system was designed to maintain a target coke temperature at a given production level under normal operating conditions. Since 1989, enhancements have been made to this control system so that it can also control the battery heating when the battery is under repair. The new control system has improved heating control capability because it adjusts the heat input to the battery in response to anticipated changes in the production schedule. During a recent repair of this 82 oven battery, the pushing schedule changed from 102 ovens/day to 88 ovens/day, then back to 102 ovens/day, then to 107 ovens/day. During this repair, the control system was able to maintain the coke temperature average standard deviation at 44 F, with a maximum 75 F.

Battle, E.T.; Chen, K.L. [Bethlehem Steel Corp., Burns Harbor, IN (United States); [Bethlehem Steel Corp., PA (United States)

1997-12-31T23:59:59.000Z

362

Columbia River System Operation Review : Final Environmental Impact Statement, Appendix D: Exhibits.  

SciTech Connect (OSTI)

The Columbia River and its tributaries are the primary water system in the Pacific Northwest, draining some 219,000 square miles in seven states and another 39,500 square miles in British Columbia. Beginning in the 1930`s, the Columbia River has been significantly modified by construction of 30 major dams on the river and its tributaries, along with dozens of non-Federal projects. Construction and subsequent operation of these water development projects have contributed to eight primary uses of the river system, including navigation, flood control, irrigation, electric power generation, fish migration, fish and wildlife habitat, recreation, and water supply and quality considerations. Increasing stress on the water development of the Columbia River and its tributaries has led primary Federal agencies to undertake intensive analysis and evaluation of the operation of these projects. These agencies are the U.S. Army Corps of Engineers and the Bureau of Reclamation, who operate the large Federal dams on the river, and the Bonneville Power Administration who sells the power generated at the dams. This review, termed the System Operation Review (SOR), has as its ultimate goal to define a strategy for future operation of the major Columbia River projects which effectively considers the needs of all river uses. This volume, Appendix D: Cultural resources appendix, Technical imput includes the following: Development of geomorphology based framework for cultural resources management, Dworshak Reservoir, Idaho; Impact profiles for SOR reservoirs; comments from the following Native American tribes: Burns Paiute Tribe; Coville Confederated Tribes; Confederated Tribes of the Warm Springs Indian Reservation; Confederated Tribes and bands of the Yakama Indian Nation (comments); Nez Perce Tribe; Coeur D`Alene Tribe; Spokane Tribe of Indians; The confederated Tribes of the Umatilla Indian Reservation.

Columbia River System Operation Review (U.S.)

1995-11-01T23:59:59.000Z

363

Generalized Tsirelson Inequalities, Commuting-Operator Provers, and Multi-Prover Interactive Proof Systems  

E-Print Network [OSTI]

A central question in quantum information theory and computational complexity is how powerful nonlocal strategies are in cooperative games with imperfect information, such as multi-prover interactive proof systems. This paper develops a new method for proving limits of nonlocal strategies that make use of prior entanglement among players (or, provers, in the terminology of multi-prover interactive proofs). Instead of proving the limits for usual isolated provers who initially share entanglement, this paper proves the limits for "commuting-operator provers", who share private space, but can apply only such operators that are commutative with any operator applied by other provers. Commuting-operator provers are at least as powerful as usual isolated but prior-entangled provers, and thus, limits for commuting-operator provers immediately give limits for usual entangled provers. Using this method, we obtain an n-party generalization of the Tsirelson bound for the Clauser-Horne- Shimony-Holt inequality for every n. Our bounds are tight in the sense that, in every n-party case, the equality is achievable by a usual nonlocal strategy with prior entanglement. We also apply our method to a 3-prover 1-round binary interactive proof for NEXP. Combined with the technique developed by Kempe, Kobayashi, Matsumoto, Toner and Vidick to analyze the soundness of the proof system, it is proved to be NP-hard to distinguish whether the entangled value of a 3-prover 1-round binary-answer game is equal to 1 or at most 1-1/p(n) for some polynomial p, where n is the number of questions. This is in contrast to the 2-prover 1-round binary-answer case, where the corresponding problem is efficiently decidable. Alternatively, NEXP has a 3-prover 1-round binary interactive proof system with perfect completeness and soundness 1-2^{-poly}.

Tsuyoshi Ito; Hirotada Kobayashi; Daniel Preda; Xiaoming Sun; Andrew C. -C. Yao

2008-04-11T23:59:59.000Z

364

Regulation study for the facility control system design at the Facility Operations Center at TA55  

SciTech Connect (OSTI)

NMT-8 is proposing to upgrade the existing Facility Control System (FCS) located within the Facility Operations Center (FOC) at the TA-55 Plutonium Processing and Handling Facility (PPHF). The FCS modifications will upgrade the existing electronics to provide better reliability of system functions. Changes include replacement of the FCS computers and field multiplex units which are used for transmitting systems data. Data collected at the FCS include temperature, pressure, contact closures, etc., and are used for monitoring and/or control of key systems at TA-55. Monitoring is provided for the electrical power system status, PF-4 HVAC air balance status (Static Differential pressure), HVAC fan system status, site chill water return temperature, fire system information, and radioactive constant air monitors alarm information, site compressed air pressure and other key systems used at TA-55. Control output signals are provided for PF-4 HVAC systems, and selected alarms for criticality, fire, loss of pressure in confinement systems. A detailed description of the FCS modifications is provided in Section 2.

NONE

1994-03-16T23:59:59.000Z

365

Method and system for controlling a synchronous machine over full operating range  

DOE Patents [OSTI]

System and method for controlling a synchronous machine are provided. The method allows for calculating a stator voltage index. The method further allows for relating the magnitude of the stator voltage index against a threshold voltage value. An offset signal is generated based on the results of the relating step. A respective state of operation of the machine is determined. The offset signal is processed based on the respective state of the machine.

Walters, James E. (Carmel, IN); Gunawan, Fani S. (Westfield, IN); Xue, Yanhong (Westfield, IN)

2002-01-01T23:59:59.000Z

366

Effect of Cooling Flow on the Operation of a Hot Rotor-Gas Foil Bearing System  

E-Print Network [OSTI]

.2 Drive end GFB: Predicted bearing static parameters ................................. 157 M.3 Free end GFB: Predicted bearing static parameters ................................... 158 1 CHAPTER I INTRODUCTION Micro gas turbine engines (<400... kW) are light-weight compact units operating at extreme temperatures and at high rotor speeds to achieve the desired power with reduced emissions [1]. Employing gas foil bearings (GFBs) in micro gas turbines increases system efficiency...

Ryu, Keun

2012-02-14T23:59:59.000Z

367

Daylight operation of a free space, entanglement-based quantum key distribution system  

E-Print Network [OSTI]

Many quantum key distribution (QKD) implementations using a free space transmission path are restricted to operation at night time in order to distinguish the signal photons used for a secure key establishment from background light. Here, we present a lean entanglement-based QKD system overcoming that imitation. By implementing spectral, spatial and temporal filtering techniques, we were able to establish a secure key continuously over several days under varying light and weather conditions.

Peloso, Matthew P; Ho, Caleb; Lamas-Linares, Antia; Kurtsiefer, Christian

2008-01-01T23:59:59.000Z

368

Daylight operation of a free space, entanglement-based quantum key distribution system  

E-Print Network [OSTI]

Many quantum key distribution (QKD) implementations using a free space transmission path are restricted to operation at night time in order to distinguish the signal photons used for a secure key establishment from background light. Here, we present a lean entanglement-based QKD system overcoming that imitation. By implementing spectral, spatial and temporal filtering techniques, we were able to establish a secure key continuously over several days under varying light and weather conditions.

Matthew P. Peloso; Ilja Gerhardt; Caleb Ho; Antia Lamas-Linares; Christian Kurtsiefer

2008-12-10T23:59:59.000Z

369

Reducing Building Energy Costs Using Optimized Operation Strategies for Constant Volume Air Handling Systems  

E-Print Network [OSTI]

SDCVP 67.380 $153.200 $41.800 $195.000 $2.89 measured energy consumption for each building. The horizontal axis is the ambient temperature. The venical axis is the average daily energy consumption in MMBtulhr. Figure 5 compares the predicted...REDUCING BUILDING ENERGY COSTS USING OPTIMIZED OPERATION STRATEGIES FOR CONSTANT VOLUME AIR HANDLING SYSTEMS Mingsheng Liu, her Atha, Agarni Reddy Ed White David Claridge and Jeff Haberl Department of Physical Plant Texas A&M University...

Liu, M.; Athar, A.; Reddy, A.; Claridge, D. E.; Haberl, J. S.; White, E.

1994-01-01T23:59:59.000Z

370

Life Cycle cost Analysis of Waste Heat Operated Absorption Cooling Systems for Building HVAC Applications  

E-Print Network [OSTI]

effect from CO2 emission resulting from the combustion of fossil fuels in utility power plants and the use of chlorofluorocarbon refrigerants, which is currently thought to affect depletion of the ozone layer. The ban on fluorocarbon fluids has been...LIFE CYCLE COST ANALYSIS OF WASTE HEAT OPERATED ABSORPTION COOLING SYSTEMS FOR BUILDING HVAC APPLICATIONS V. Murugavel and R. Saravanan Refrigeration and Air conditioning Laboratory Department of Mechanical Engineering, Anna University...

Saravanan, R.; Murugavel, V.

2010-01-01T23:59:59.000Z

371

Platform leadership through system interfaces : a study of application programming interfaces for mobile operating systems  

E-Print Network [OSTI]

The Smart Mobile device industry is witnessing rapid growth with the increased convergence of voice-centric mobile phones and data-centric personal digital assistant systems. Improving capabilities in device hardware have ...

Mandala, Ashok Chakravarthy

2007-01-01T23:59:59.000Z

372

A.24 ENHANCING THE CAPABILITY OF COMPUTATIONAL EARTH SYSTEM MODELS AND NASA DATA FOR OPERATION AND ASSESSMENT  

E-Print Network [OSTI]

A.24-1 A.24 ENHANCING THE CAPABILITY OF COMPUTATIONAL EARTH SYSTEM MODELS AND NASA DATA) computational support of Earth system modeling. #12;A.24-2 2.1 Acceleration of Operational Use of Research Data

373

Pipeline safety. Information on gas distribution system operators reporting unaccounted for gas  

SciTech Connect (OSTI)

According to Department of Transportation records, 92 of the 1491 gas distribution system operators reported high levels of unaccounted for gas (unaccounted for gas is the difference between the amount of gas purchased and sold) for 1984, the latest year for which data were available. Of the 92 gas system operators, 64 were municipals (gas systems owned by a governmental entity, such as a city or county) and 28 were nonmunicipals. Based on the data we reviewed, these 92 gas systems did not report any accidents during calendar year 1984. Part I provides more details on the unaccounted for gas of municipal gas systems. Federal and industry officials consider that unaccounted for gas in excess of 15% of gas purchases high and worthy of investigation. High levels of unaccounted for gas can occur for a number of reasons, including errors in metering and billing, not accounting for gas used by city or company facilities, and leaking gas pipelines. While it may, a leak does not always indicate a safety problem. For example, a slow leak in an open area may not be a safety hazard. The Secretary has the authority to regulate any liquid deemed hazardous when transported by pipeline, and therefore could regulate hazardous liquids not currently regulated including methanol and carbon dioxide. However, the Department of Transportation has no plans to regulate any additional liquids. Part II provides more details. 4 figs., 2 tabs.

Not Available

1986-02-01T23:59:59.000Z

374

Validating cognitive support for operators of complex human-machine systems  

SciTech Connect (OSTI)

Modem nuclear power plants (NPPs) are complex systems whose performance is the result of an intricate interaction of human and system control. A complex system may be defined as one which supports a dynamic process involving a large number of elements that interact in many different ways. Safety is addressed through defense-in-depth design and preplanning; i.e., designers consider the types of failures that are most likely to occur and those of high consequence, and design their solutions in advance. However, complex interactions and their failure modes cannot always be anticipated by the designer and may be unfamiliar to plant personnel. These situations may pose cognitive demands on plant personnel, both individually and as a crew. Other factors may contribute to the cognitive challenges of NPP operation as well, including hierarchal processes, dynamic pace, system redundancy and reliability, and conflicting objectives. These factors are discussed in this paper.

O`Hara, J. [Brookhaven National Lab., Upton, NY (United States); Wachtel, J. [US Nuclear Regulatory Commission, Washington, DC (United States)

1995-10-01T23:59:59.000Z

375

Columbia River System Operation Review : Final Environmental Impact Statement, Appendix N: Wildlife.  

SciTech Connect (OSTI)

The Columbia River System is a vast and complex combination of Federal and non-Federal facilities used for many purposes including power production, irrigation, navigation, flood control, recreation, fish and wildlife habitat and municipal and industrial water supply. Each river use competes for the limited water resources in the Columbia River Basin. This technical appendix addresses only the effects of alternative system operating strategies for managing the Columbia River system. The environmental impact statement (EIS) itself and some of the other appendices present analyses of the alternative approaches to the other three decisions considered as part of the SOR. This document is the product of the Wildlife Work Group, focusing on wildlife impacts but not including fishes. Topics covered include the following: scope and process; existing and affected environment, including specific discussion of 18 projects in the Columbia river basin. Analysis, evaluation, and alternatives are presented for all projects. System wide impacts to wildlife are also included.

Columbia River System Operation Review (U.S.)

1995-11-01T23:59:59.000Z

376

Response calculations based on an independent particle system with the exact one-particle density matrix: Polarizabilities  

SciTech Connect (OSTI)

Recently, we have demonstrated that the problems finding a suitable adiabatic approximation in time-dependent one-body reduced density matrix functional theory can be remedied by introducing an additional degree of freedom to describe the system: the phase of the natural orbitals [K. J. H. Giesbertz, O. V. Gritsenko, and E. J. Baerends, Phys. Rev. Lett. 105, 013002 (2010); K. J. H. Giesbertz, O. V. Gritsenko, and E. J. Baerends, J. Chem. Phys. 133, 174119 (2010)]. In this article we will show in detail how the frequency-dependent response equations give the proper static limit (? ? 0), including the perturbation in the chemical potential, which is required in static response theory to ensure the correct number of particles. Additionally we show results for the polarizability for H{sub 2} and compare the performance of two different two-electron functionals: the phase-including LwdinShull functional and the density matrix form of the LwdinShull functional.

Giesbertz, K. J. H., E-mail: k.j.h.giesbertz@vu.nl [Section Theoretical Chemistry, VU University, De Boelelaan 1083, 1081 HV Amsterdam (Netherlands)] [Section Theoretical Chemistry, VU University, De Boelelaan 1083, 1081 HV Amsterdam (Netherlands); Gritsenko, O. V. [Section Theoretical Chemistry, VU University, De Boelelaan 1083, 1081 HV Amsterdam (Netherlands) [Section Theoretical Chemistry, VU University, De Boelelaan 1083, 1081 HV Amsterdam (Netherlands); Pohang University of Science and Technology, Department of Chemistry, San 31, Hyojadong, Namgu, Pohang 790-784 (Korea, Republic of); Baerends, E. J. [Section Theoretical Chemistry, VU University, De Boelelaan 1083, 1081 HV Amsterdam (Netherlands) [Section Theoretical Chemistry, VU University, De Boelelaan 1083, 1081 HV Amsterdam (Netherlands); Pohang University of Science and Technology, Department of Chemistry, San 31, Hyojadong, Namgu, Pohang 790-784 (Korea, Republic of); Department of Chemistry, Faculty of Science, King Abdulaziz University, Jeddah 21589 (Saudi Arabia)

2014-05-14T23:59:59.000Z

377

Detailed design report for an operational phase panel-closure system  

SciTech Connect (OSTI)

Under contract to Westinghouse Electric Corporation (Westinghouse), Waste Isolation Division (WID), IT Corporation has prepared a detailed design of a panel-closure system for the Waste Isolation Pilot Plant (WIPP). Preparation of this detailed design of an operational-phase closure system is required to support a Resource Conservation and Recovery Act (RCRA) Part B permit application and a non-migration variance petition. This report describes the detailed design for a panel-closure system specific to the WIPP site. The recommended panel-closure system will adequately isolate the waste-emplacement panels for at least 35 years. This report provides detailed design and material engineering specifications for the construction, emplacement, and interface-grouting associated with a panel-closure system at the WIPP repository, which would ensure that an effective panel-closure system is in place for at least 35 years. The panel-closure system provides assurance that the limit for the migration of volatile organic compounds (VOC) will be met at the point of compliance, the WIPP site boundary. This assurance is obtained through the inherent flexibility of the panel-closure system.

NONE

1996-01-11T23:59:59.000Z

378

Utility FGD survey, January--December 1989. Volume 2, Design performance data for operating FGD systems: Part 2  

SciTech Connect (OSTI)

This is Volume 2 part 2, of the Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. This volume particularly contains basic design and performance data.

Hance, S.L.; McKibben, R.S.; Jones, F.M. [IT Corp., Cincinnati, OH (United States)] [IT Corp., Cincinnati, OH (United States)

1992-03-01T23:59:59.000Z

379

Risk Assessment Using The Homeland-Defense Operational Planning System (HOPS)  

SciTech Connect (OSTI)

The Homeland-Defense Operational Planning System (HOPS), is a new operational planning tool leveraging Lawrence Livermore National Laboratory's expertise in weapons systems and in sparse information analysis to support the defense of the U.S. homeland. HOPS provides planners with a basis to make decisions to protect against acts of terrorism, focusing on the defense of facilities critical to U.S. infrastructure. Criticality of facilities, structures, and systems is evaluated on a composite matrix of specific projected casualty, economic, and sociopolitical impact bins. Based on these criteria, significant unidentified vulnerabilities are identified and secured. To provide insight into potential successes by malevolent actors, HOPS analysts strive to base their efforts mainly on unclassified open-source data. However, more cooperation is needed between HOPS analysts and facility representatives to provide an advantage to those whose task is to defend these facilities. Evaluated facilities include: refineries, major ports, nuclear power plants and other nuclear licensees, dams, government installations, convention centers, sports stadiums, tourist venues, and public and freight transportation systems. A generalized summary of analyses of U.S. infrastructure facilities will be presented.

Price, D E; Durling, R L

2005-10-10T23:59:59.000Z

380

Hilbert-Schmidt Operators vs. Integrable Systems of Elliptic Calogero-Moser Type IV. The Relativistic Heun (van Diejen) Case  

E-Print Network [OSTI]

The 'relativistic' Heun equation is an 8-coupling difference equation that generalizes the 4-coupling Heun differential equation. It can be viewed as the time-independent Schr\\"odinger equation for an analytic difference operator introduced by van Diejen. We study Hilbert space features of this operator and its 'modular partner', based on an in-depth analysis of the eigenvectors of a Hilbert-Schmidt integral operator whose integral kernel has a previously known relation to the two difference operators. With suitable restrictions on the parameters, we show that the commuting difference operators can be promoted to a modular pair of self-adjoint commuting operators, which share their eigenvectors with the integral operator. Various remarkable spectral symmetries and commutativity properties follow from this correspondence. In particular, with couplings varying over a suitable ball in ${\\mathbb R}^8$, the discrete spectra of the operator pair are invariant under the $E_8$ Weyl group. The asymptotic behavior of an 8-parameter family of orthonormal polynomials is shown to be shared by the joint eigenvectors.

Simon N. M. Ruijsenaars

2015-01-13T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Operating the LCLS Gas Attenuator and Gas Detector System with Apertures of 6mm Diameter  

SciTech Connect (OSTI)

The possibility of increasing the apertures of the LCLS gas attenuator/gas detector system is considered. It is shown that increase of the apertures from 3 to 6 mm, together with 4-fold reduction of the operation pressure does not adversely affect the vacuum conditions upstream or downstream. No change of the pump speed and the lengths of the differential pumping cells is required. One minor modification is the use of 1.5 cm long tubular apertures in the end cells of the differential pumping system. Reduction of the pressure does not affect performance of the gas attenuator/gas detector system at the FEL energies below, roughly, 2 keV. Some minor performance degradation occurs at higher energies.

Ryutov, D.D.; Bionta, R.M.; Hau-Riege, S.P.; Kishiyama, K.I.; Roeben, M.D.; Shen, S.; /LLNL, Livermore; Stefan, P.M.; /SLAC; ,

2010-11-17T23:59:59.000Z

382

Columbia River System Operation Review : Final Environmental Impact Statement, Appendix O: Economic and Social Impact.  

SciTech Connect (OSTI)

This Appendix O of the Final Environmental Impact Statement for the Columbia River System measures the economic and social effects of the alternative system operation strategies and includes both geographic and methodology components. Areas discussed in detail include the following: purpose, scope and process; an economic history of the Columbia River Basin and its use today including the Columbia River and Socio-economic development in the Northwest and Major uses of the River System; Analysis procedures and methodologies including national economic evaluation, the concepts, analysis of assumptions, analysis for specific river uses, water quality, Regional evaluation, analysis, and social impacts; alternatives and impacts including implementation costs, andromous fish, resident fish and wildlife, flood control, irrigation and municipal and industrial water supply, navigation impacts, power, recreation, annual costs, regional economic analysis. Extensive comparison of alternatives is included.

Columbia River System Operation Review (U.S.)

1995-11-01T23:59:59.000Z

383

Hydraulically actuated fuel injector including a pilot operated spool valve assembly and hydraulic system using same  

DOE Patents [OSTI]

The present invention relates to hydraulic systems including hydraulically actuated fuel injectors that have a pilot operated spool valve assembly. One class of hydraulically actuated fuel injectors includes a solenoid driven pilot valve that controls the initiation of the injection event. However, during cold start conditions, hydraulic fluid, typically engine lubricating oil, is particularly viscous and is often difficult to displace through the relatively small drain path that is defined past the pilot valve member. Because the spool valve typically responds slower than expected during cold start due to the difficulty in displacing the relatively viscous oil, accurate start of injection timing can be difficult to achieve. There also exists a greater difficulty in reaching the higher end of the cold operating speed range. Therefore, the present invention utilizes a fluid evacuation valve to aid in displacement of the relatively viscous oil during cold start conditions.

Shafer, Scott F. (Morton, IL)

2002-01-01T23:59:59.000Z

384

Independent Oversight Activity Report, Hanford Waste Treatment...  

Office of Environmental Management (EM)

of River Protection review of the High Level Waste Facility heating, ventilation, and air conditioning systems. Independent Oversight Activity Report, Hanford Waste Treatment...

385

Independent Oversight Review, Los Alamos National Laboratory...  

Broader source: Energy.gov (indexed) [DOE]

Weapons Engineering Tritium Facility Tritium Gas Containment Vital Safety System The Office of Enforcement and Oversight (Independent Oversight), within the Office of Health,...

386

Analysis of operations and cyber security policies for a system of cooperating Flexible Alternating Current Transmission System (FACTS) devices.  

SciTech Connect (OSTI)

Flexible Alternating Current Transmission Systems (FACTS) devices are installed on electric power transmission lines to stabilize and regulate power flow. Power lines protected by FACTS devices can increase power flow and better respond to contingencies. The University of Missouri Rolla (UMR) is currently working on a multi-year project to examine the potential use of multiple FACTS devices distributed over a large power system region in a cooperative arrangement in which the FACTS devices work together to optimize and stabilize the regional power system. The report describes operational and security challenges that need to be addressed to employ FACTS devices in this way and recommends references, processes, technologies, and policies to address these challenges.

Phillips, Laurence R.; Tejani, Bankim; Margulies, Jonathan; Hills, Jason L.; Richardson, Bryan T.; Baca, Micheal J.; Weiland, Laura

2005-12-01T23:59:59.000Z

387

Independent Oversight Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order prescribes the requirements and responsibilities for the DOE Independent Oversight Program. Cancels DOE O 470.2B.

2011-08-30T23:59:59.000Z

388

Preliminary Concept of Operations for a Global Cylinder Identification and Monitoring System  

SciTech Connect (OSTI)

This report describes a preliminary concept of operations for a Global Cylinder Identification and Monitoring System that could improve the efficiency of the International Atomic Energy Agency (IAEA) in conducting its current inspection activities and could provide a capability to substantially increase its ability to detect credible diversion scenarios and undeclared production pathways involving UF6 cylinders. There exist concerns that a proliferant State with access to enrichment technology could obtain a cylinder containing natural or low-enriched uranium hexafluoride (UF6) and produce a significant quantity (SQ)1 of highly enriched uranium in as little as 30 days. The National Nuclear Security Administration (NNSA) through the Next Generation Safeguards Initiative sponsored a multi-laboratory team to develop an integrated system that provides for detecting scenarios involving 1) diverting an entire declared cylinder for enrichment at a clandestine facility, 2) misusing a declared cylinder at a safeguarded facility, and 3) using an undeclared cylinder at a safeguarded facility. An important objective in developing this integrated system was to improve the timeliness for detecting the cylinder diversion and undeclared production scenarios. Developing this preliminary concept required in-depth analyses of current operational and safeguards practices at conversion, enrichment, and fuel fabrication facilities. The analyses evaluated the processing, movement, and storage of cylinders at the facilities; the movement of cylinders between facilities (including cylinder fabrication); and the misuse of safeguarded facilities.

Whitaker, J. M. [ORNL; White-Horton, J. L. [ORNL; Morgan, J. B. [InSolves Associates

2013-08-01T23:59:59.000Z

389

Incorporating Wind Generation Forecast Uncertainty into Power System Operation, Dispatch, and Unit Commitment Procedures  

SciTech Connect (OSTI)

In this paper, an approach to evaluate the uncertainties of the balancing capacity, ramping capability, and ramp duration requirements is proposed. The approach includes three steps: forecast data acquisition, statistical analysis of retrospective information, and prediction of grid balancing requirements for a specified time horizon and a given confidence level. Assessment of the capacity and ramping requirements is performed using a specially developed probabilistic algorithm based on histogram analysis, incorporating sources of uncertainty of both continuous (wind and load forecast errors) and discrete (forced generator outages and start-up failures) nature. A new method called the "flying-brick" technique is developed to evaluate the look-ahead required generation performance envelope for the worst case scenario within a user-specified confidence level. A self-validation process is used to validate the accuracy of the confidence intervals. To demonstrate the validity of the developed uncertainty assessment methods and its impact on grid operation, a framework for integrating the proposed methods with an EMS system is developed. Demonstration through integration with an EMS system illustrates the applicability of the proposed methodology and the developed tool for actual grid operation and paves the road for integration with EMS systems from other vendors.

Makarov, Yuri V.; Etingov, Pavel V.; Huang, Zhenyu; Ma, Jian; Subbarao, Krishnappa

2010-10-19T23:59:59.000Z

390

Reconstruction and operation of the El Paso Solar Pond with a geosynthetic clay liner system  

SciTech Connect (OSTI)

After the original XR-5 membrane liner failed in 1992, the El Paso Solar Pond was reconstructed and operated with a geosynthetic clay liner (GCL) system. The solar pond is approximately 3,000 m{sup 2} in surface area, and 3.2 meters deep with a 15{degree} side-wall slope. A new heat extraction system includes 15-cm (6-inch) rubber hoses and two redesigned polypropylene diffusers. A new automated instrumentation system was developed for monitoring pond status. It uses a newly developed scanner combined with a computer for both position control and data logging. The salinity gradient was established using a new scanning method, as opposed to the previously used fixed point method. Fresh water was injected into brine through a newly designed PVC bar shaped diffuser, which scans automatically within preset regions. After two months, the pond bottom reached 80 C and heat extraction began. The performance of the GCL system, characterized by its hydraulic conductivity, has been monitored, and generates the first full scale, elevated temperature data for a GCL system. Preliminary hydraulic conductivity data indicate values comparable with other clay liner systems.

Lu, H.; Swift, A.H.P. [Univ. of Texas, El Paso, TX (United States)

1996-12-31T23:59:59.000Z

391

Hydronic Systems: Designing for Setback Operation, Ithaca, New York (Fact Sheet)  

SciTech Connect (OSTI)

Conventional wisdom surrounding space heating has told us a couple of things consistently for several years now: size the mechanical systems to the heating loads and setting the thermostat back at night will result in energy savings. The problem is these two recommendations oppose each other. A system that is properly sized to the heating load will not have the extra capacity necessary to recover from a thermostat setback, especially at design conditions. The implication of this is that, for setback to be successfully implemented, the heating system must be oversized. This issue is exacerbated further when an outdoor reset control is used with a condensing boiler, because not only is the system matched to the load at design, the outdoor reset control matches the output to the load under varying outdoor temperatures. Under these circumstances, the home may never recover from setback. Special controls to bypass the outdoor reset sensor are then needed. Properly designing a hydronic system for setback operation can be accomplished but depends on several factors. Determining the appropriateness of setback for a particular project is the first step. This is followed by proper sizing of the boiler and baseboard to ensure the needed capacity can be met. Finally, control settings must be chosen that result in the most efficient and responsive performance. This guide provides step by step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Not Available

2014-05-01T23:59:59.000Z

392

ENG EC/ME/SE 543 Sustainable Power Systems Page 1/5 ENG EC/ME/SE 543 Sustainable Power Systems: Planning, Operation, and Markets  

E-Print Network [OSTI]

reserves. While the procurement of capacity reserves and of energy can be achieved by market clearing Systems: Planning, Operation, and Markets Spring 2013, MW 2:00-4:00pm, PHO 210 Instructor, Michael C of power systems and presents their interaction in the design and operation of markets that foster

393

ENG EC/ME/SE 543 Sustainable Power Systems Page 1/5 ENG EC/ME/SE 543 Sustainable Power Systems: Planning, Operation, and Markets  

E-Print Network [OSTI]

the procurement of capacity reserves and of energy can be achieved by market clearing procedures, to secure system Systems: Planning, Operation, and Markets Spring 2014, M-W 2:00-4:00pm, PHO 210 Instructor: Michael in the design and operation of markets that foster: Environmental Sustainability Economic Sustainability

Lin, Xi

394

Economic Optimal Operation of Community Energy Storage Systems in Competitive Energy Markets  

E-Print Network [OSTI]

Distributed, controllable energy storage devices offer several significant benefits to electric power system operation. Three such benefits include reducing peak load, providing standby power, and enhancing power quality. These benefits, however, are only realized during peak load or during an outage, events that are infrequent. This paper presents a means of realizing additional benefits by taking advantage of the fluctuating costs of energy in competitive energy markets. An algorithm for optimal charge/discharge scheduling of community energy storage (CES) devices as well as an analysis of several of the key drivers of such optimization are discussed.

Arghandeh, Reza; Onen, Ahmet; Jung, Jaesung; Broadwater, Robert P

2014-01-01T23:59:59.000Z

395

START-3: Operational Evaluations of the ISUS Engine Ground Demonstration Thermionic Power System  

SciTech Connect (OSTI)

START-3 was a test program conducted in order to demonstrate and characterize the operational performance of the prototype Integrated Solar Upper Stage (ISUS) thermionic power system. The test device consisted of a graphite thermal storage uni~ multilayer foil insulation, and sixteen thermionic converters electrically connected in a series array. Several thermal input conditions were achieved during the test, which resulted in measuring converter performance at average converter hot shoe temperatures in the range of 1600 K to 2000 K. Results indicate that the ;hermionic converter; did not perform as weil as expected in the array individual sixteen converters is currently being performed.

Luchau, D.W.; Luke, J.R.; Wyant, F.J.

1998-10-08T23:59:59.000Z

396

GTRI Remote Monitoring System: Training and Operational Needs Assessment Analysis Report  

SciTech Connect (OSTI)

The mission of the United States Department of Energy (DOE) National Nuclear Security Administrations (NNSA's) Global Threat Reduction Initiative (GTRI) is to identify, secure, recover and facilitate the disposition of vulnerable nuclear and high-risk radioactive materials around the world that pose a threat to the United States and the international community. The GTRI's unique mission to reduce and protect vulnerable nuclear and radiological materials located at civilian sites worldwide directly addresses recommendations of the 9/11 Commission1, and is a vital part of the President's National Security Strategy and the Global Initiative. The GTRI Remote Monitoring System (RMS) is a standalone security system that includes radiation and tamper alarms, and CCTV; which can be transmitted securely over the Internet to multiple on-site and off-site locations. Through our experiences during installation of the system at 162 sites, plus feedback received from Alarm Response Training course participants, site input to project teams and analysis of trouble calls; indications were that current system training was lacking and inconsistent. A survey was undertaken to gather information from RMS users across the nation, to evaluate the current level of training and determine what if any improvements needed to be made. Additional questions were focused on the operation of the RMS software. The training survey was initially sent electronically to 245 users at the RMS sites and achieved a 37.6% return rate. Analysis of the resulting data revealed that 34.6% of the respondents had not received training or were unsure if they had, despite the fact that vendor engineers provide training at installation of the system. Any training received was referred to as minimal, and brief, not documented, and nothing in writing. 63.7% of respondents said they were either not at all prepared or only somewhat prepared to use the RMS software required to effectively operate the system. As a result of this analysis, a formal training curriculum will be designed and implemented to include several blended learning delivery options. This training will be piloted at RMS sites; initial training will become a required element of RMS installation and refresher training will be considered for sustainability of operations.

Day, Debra E.; Fox, Sorcha

2012-04-20T23:59:59.000Z

397

Case studies of energy information systems and related technology: Operational practices, costs, and benefits  

SciTech Connect (OSTI)

Energy Information Systems (EIS), which can monitor and analyze building energy consumption and related data throughout the Internet, have been increasing in use over the last decade. Though EIS developers describe the capabilities, costs, and benefits of EIS, many of these descriptions are idealized and often insufficient for potential users to evaluate cost, benefit and operational usefulness. LBNL has conducted a series of case studies of existing EIS and related technology installations. This study explored the following questions: (1) How is the EIS used in day-to-day operation? (2) What are the costs and benefits of an EIS? (3) Where do the energy savings come from? This paper reviews the process of these technologies from installation through energy management practice. The study is based on interviews with operators and energy managers who use EIS. Analysis of energy data trended by EIS and utility bills was also conducted to measure the benefit. This paper explores common uses and findings to identify energy savings attributable to EIS, and discusses non-energy benefits as well. This paper also addresses technologies related to EIS that have been demonstrated and evaluated by LBNL.

Motegi, Naoya; Piette, Mary Ann; Kinney, Satkartar; Dewey, Jim

2003-09-02T23:59:59.000Z

398

Integrated operation of a pressurized fixed bed gasifier and hot gas desulfurization system  

SciTech Connect (OSTI)

The primary objective of this contract continues to be the demonstration of high fuel gas desulfurization of high temperature fuel gas desulfurization and particulate removal using a moving bed process with regenerable metal oxide sorbent. The fuel gas source for test operation is a fixed bed, air blown gasifier located at GE Corporate Research and Development in Schenectady, New York. The demonstration project also includes the design, construction, installation and test operation of a gas turbine simulator which includes a modified GE MS6000 type gas turbine combustor and a film cooled, first stage LM 6000 nozzle assembly. The hot gas cleanup (HGCU) system and the gas turbine simulator have been designed to operate with the full 8000 lb/hr fuel gas flow from the gasification of 1800 lb/hr of coal at 280 psig and 1000 to 1150 F. An advanced formulation of zinc ferrite as well as zinc titanate have been used as the regenerable metal oxide sorbents in testing to date. Demonstration of halogen removal as well as characterization of alkali and heavy metal concentrations in the fuel gas remain objectives, as well. Results are discussed.

Cook, C.S.; Gal, E.; Furman, A.H.; Ayala, R.

1992-01-01T23:59:59.000Z

399

Integrated operation of a pressurized fixed bed gasifier and hot gas desulfurization system  

SciTech Connect (OSTI)

The primary objective of this contract continues to be the demonstration of high fuel gas desulfurization of high temperature fuel gas desulfurization and particulate removal using a moving bed process with regenerable metal oxide sorbent. The fuel gas source for test operation is a fixed bed, air blown gasifier located at GE Corporate Research and Development in Schenectady, New York. The demonstration project also includes the design, construction, installation and test operation of a gas turbine simulator which includes a modified GE MS6000 type gas turbine combustor and a film cooled, first stage LM 6000 nozzle assembly. The hot gas cleanup (HGCU) system and the gas turbine simulator have been designed to operate with the full 8000 lb/hr fuel gas flow from the gasification of 1800 lb/hr of coal at 280 psig and 1000 to 1150 F. An advanced formulation of zinc ferrite as well as zinc titanate have been used as the regenerable metal oxide sorbents in testing to date. Demonstration of halogen removal as well as characterization of alkali and heavy metal concentrations in the fuel gas remain objectives, as well. Results are discussed.

Cook, C.S.; Gal, E.; Furman, A.H.; Ayala, R.

1992-12-01T23:59:59.000Z

400

Operator control systems and methods for swing-free gantry-style cranes  

DOE Patents [OSTI]

A system and method are disclosed for eliminating swing motions in gantry-style cranes while subject to operator control. The present invention comprises an infinite impulse response (IIR) filter and a proportional-integral (PI) feedback controller. The IIR filter receives input signals (commanded velocity or acceleration) from an operator input device and transforms them into output signals in such a fashion that the resulting motion is swing free (i.e., end-point swinging prevented). The parameters of the IIR filter are updated in real time using measurements from a hoist cable length encoder. The PI feedback controller compensates for modeling errors and external disturbances, such as wind or perturbations caused by collision with objects. The PI feedback controller operates on cable swing angle measurements provided by a cable angle sensor. The present invention adjusts acceleration and deceleration to eliminate oscillations. An especially important feature of the present invention is that it compensates for variable-length cable motions from multiple cables attached to a suspended payload. 10 figs.

Feddema, J.T.; Petterson, B.J.; Robinett, R.D. III

1998-07-28T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Operator control systems and methods for swing-free gantry-style cranes  

DOE Patents [OSTI]

A system and method for eliminating swing motions in gantry-style cranes while subject to operator control is presented. The present invention comprises an infinite impulse response ("IIR") filter and a proportional-integral ("PI") feedback controller (50). The IIR filter receives input signals (46) (commanded velocity or acceleration) from an operator input device (45) and transforms them into output signals (47) in such a fashion that the resulting motion is swing free (i.e., end-point swinging prevented). The parameters of the IIR filter are updated in real time using measurements from a hoist cable length encoder (25). The PI feedback controller compensates for modeling errors and external disturbances, such as wind or perturbations caused by collision with objects. The PI feedback controller operates on cable swing angle measurements provided by a cable angle sensor (27). The present invention adjusts acceleration and deceleration to eliminate oscillations. An especially important feature of the present invention is that it compensates for variable-length cable motions from multiple cables attached to a suspended payload.

Feddema, John T. (Albuquerque, NM); Petterson, Ben J. (Albuquerque, NM); Robinett, III, Rush D. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

402

Operational characteristics of the J-PARC cryogenic hydrogen system for a spallation neutron source  

SciTech Connect (OSTI)

The J-PARC cryogenic hydrogen system provides supercritical hydrogen with the para-hydrogen concentration of more than 99 % and the temperature of less than 20 K to three moderators so as to provide cold pulsed neutron beams of a higher neutronic performance. Furthermore, the temperature fluctuation of the feed hydrogen stream is required to be within 0.25 K. A stable 300-kW proton beam operation has been carried out since November 2012. The para-hydrogen concentrations were measured during the cool-down process. It is confirmed that para-hydrogen always exists in the equilibrium concentration because of the installation of an ortho-para hydrogen convertor. Propagation characteristics of temperature fluctuation were measured by temporarily changing the heater power under off-beam condition to clarify the effects of a heater control for thermal compensation on the feed temperature fluctuation. The experimental data gave an allowable temperature fluctuation of 1.05 K. It is clarified through a 286-kW and a 524-kW proton beam operations that the heater control would be applicable for the 1-MW proton beam operation by extrapolating from the experimental data.

Tatsumoto, Hideki; Ohtsu, Kiichi; Aso, Tomokazu; Kawakami, Yoshihiko; Teshigawara, Makoto [J-PARC Center, Japan Atomic Energy Agency, Tokai, Ibaraki, 319-1195 (Japan)

2014-01-29T23:59:59.000Z

403

Investigation of the Noncondensable Effect and the Operational Modes of the Passive Condenser System  

SciTech Connect (OSTI)

An experimental study is performed to investigate the effect of noncondensable gas in a passive condenser system. A vertical condenser tube is submerged in a water pool where the heat transferred from the condenser tube is removed through boiling. Data are obtained for three operational modes of the passive condenser. Degradation of the condensation with noncondensable gas is investigated. The condensation heat transfer rate is enhanced by increasing the inlet steam flow rate and the system pressure. For the condenser submerged in a saturated water pool, strong primary pressure dependency is observed. A boundary layer-based condensation model and a simple condensation model with the interfacial friction factor correlation are developed. The model predictions are compared with the pure steam data, and the agreement is satisfactory.

Oh, Seungmin; Revankar, Shripad T. [Purdue University (United States)

2005-10-15T23:59:59.000Z

404

Methods, systems and apparatus for controlling operation of two alternating current (AC) machines  

DOE Patents [OSTI]

A system is provided for controlling two alternating current (AC) machines via a five-phase PWM inverter module. The system comprises a first control loop, a second control loop, and a current command adjustment module. The current command adjustment module operates in conjunction with the first control loop and the second control loop to continuously adjust current command signals that control the first AC machine and the second AC machine such that they share the input voltage available to them without compromising the target mechanical output power of either machine. This way, even when the phase voltage available to either one of the machines decreases, that machine outputs its target mechanical output power.

Gallegos-Lopez, Gabriel (Torrance, CA); Nagashima, James M. (Cerritos, CA); Perisic, Milun (Torrance, CA); Hiti, Silva (Redondo Beach, CA)

2012-06-05T23:59:59.000Z

405

Testing to expand the rotary mode core sampling system operating envelope  

SciTech Connect (OSTI)

Rotary sampling using the Rotary Mode Core Sampling System (RMCSS) is constrained by what is referred to as the ``Operating Envelope``. The Operating Envelop defines the maximum downward force, maximum rotational speed and minimum purge gas flow allowed during operation of the RMCSS. The original values of 1170 lb. down force, 55 RPM rotational speed, and 30 SCFM nitrogen purge gas were determined during original envelope testing. This envelope was determined by observing the temperature rise on the bitface while drilling into waste simulants. The maximum temperature in single-shell tanks (SSTS) is considered to be approximately 9O C and the critical drill bit temperature, which is the temperature at which an exothermic reaction could be initiated in the tank waste, was previously determined to be 150 C. Thus, the drill bit temperature increase was limited to 60 C. Thermal properties of these simulants approximated typical properties of waste tank saltcake. Later, more detailed envelope testing which used a pumice block simulant, showed a notably higher temperature rise while drilling. This pumice material, which simulated a ``worst case`` foreign object embedded in the waste, has lower thermal conductivity and lower thermal diffusivity than earlier simulants. These properties caused a slower heat transfer in the pumice than in the previous simulants and consequently a higher temperature rise. The maximum downward force was subsequently reduced to 750 lb (at a maximum 55 RPM and minimum 30 SCFM purge gas flow) which was the maximum value at which the drill bit could be operated and still remain below the 60 C temperature rise.

Witwer, K.S.

1998-01-21T23:59:59.000Z

406

Norm estimates of complex symmetric opera-tors applied to quantum systems  

E-Print Network [OSTI]

for computing the norm of a compact complex symmetric operator. This ob- servation is applied to two concrete symmetric operator [10]. For certain unbounded operators with compact resolvent, the refined polar with non-selfadjoint operators is much more difficult than with self- adjoint operators due to the lack

407

Stochastic Methods for Planning and Operating Power Systems with Large Amounts of Wind and Solar Power: Preprint  

SciTech Connect (OSTI)

Wind and solar generators differ in their generation characteristics than conventional generators. The variable output and imperfect predictability of these generators face a stochastic approach to plan and operate the power system without fundamentally changing the operation and planning problems. This paper overviews stochastic modeling challenges in operations, generation planning, and transmission planning, with references to current industry and academic work. Different stochastic problem formulations, including approximations, are also discussed.

Milligan, M.; Donohoo, P.; O'Malley, M.

2012-09-01T23:59:59.000Z

408

Preliminary definition of the DOE/OCRWM transportation operating system: Final report  

SciTech Connect (OSTI)

This paper is based on the report ''Preliminary Definition of the Transportation Operations System'' and presents a summary of the preliminary definition of transportation operations activities for the cask shipment cycle, commencing with the dispatch of an empty cask, to loading and unloading of cask contents, and preparation of the empty cask for redispatch. It first presents a high-level description of the transportation cycle and then further describes each of the major activities in greater detail. For simplicity of presentation, the highway mode of transport is most often used to describe activities. The reader should keep in mind that the use of other modes will slightly alter the activities and possibly the sequences. Major activities and functions of the system are organized into a first cut of how they could be allocated to specific facilities. The reader should keep in mind that the assignment of functions and the aggregation of these into specific facilities are tasks which have yet to be performed. This paper simply presents a first look at possible groupings of the functions on a facility basis. 12 figs.

Rawl, R.R.; Kline, S.C.

1988-01-01T23:59:59.000Z

409

Implementation of Smart Operation Strategies for Air-Conditioning and Lighting Systems for Ministries Complex in the State of Kuwait  

E-Print Network [OSTI]

The smart operation strategies were implemented for Air-Conditioning (A/C) and lighting systems to reduce the national load at Ministries Complex (MC) in the state of Kuwait. The A/C system in MC is a district cooling system that comprises of 8...

Al-Mulla, A.; Maheshwari, G. P.; Al-Nakib, D.; Ishaqali, H.

410

An Agent-Based Test Bed for the Integrated Study of Retail and Wholesale Power System Operations  

E-Print Network [OSTI]

An Agent-Based Test Bed for the Integrated Study of Retail and Wholesale Power System Operations D study of retail and wholesale power markets operating over transmission and distribution networks with smart-grid functionality. The test bed will seam together two existing test beds, the AMES Wholesale

Tesfatsion, Leigh

411

FREEWAY PERFORMANCE MEASUREMENT SYSTEM (PeMS): AN OPERATIONAL ANALYSIS TOOL  

E-Print Network [OSTI]

and calibrate simulation models. The paper describes the use of PeMS in conducting operational analysis from case studies on conducting freeway operational analyses, bottleneck identification, Level and researchers in conducting freeway operational analyses, bottleneck identification, determining the Level

Varaiya, Pravin

412

A Wildfire Behavior Modeling System at Los Alamos National Laboratory for Operational Applications  

SciTech Connect (OSTI)

To support efforts to protect facilities and property at Los Alamos National Laboratory from damages caused by wildfire, we completed a multiyear project to develop a system for modeling the behavior of wildfires in the Los Alamos region. This was accomplished by parameterizing the FARSITE wildfire behavior model with locally gathered data representing topography, fuels, and weather conditions from throughout the Los Alamos region. Detailed parameterization was made possible by an extensive monitoring network of permanent plots, weather towers, and other data collection facilities. We also incorporated a database of lightning strikes that can be used individually as repeatable ignition points or can be used as a group in Monte Carlo simulation exercises and in other randomization procedures. The assembled modeling system was subjected to sensitivity analyses and was validated against documented fires, including the Cerro Grande Fire. The resulting modeling system is a valuable tool for research and management. It also complements knowledge based on professional expertise and information gathered from other modeling technologies. However, the modeling system requires frequent updates of the input data layers to produce currently valid results, to adapt to changes in environmental conditions within the Los Alamos region, and to allow for the quick production of model outputs during emergency operations.

S.W. Koch; R.G.Balice

2004-11-01T23:59:59.000Z

413

Pratt & Whtiney: Homogenous Metals,Inc. (HMI) Case Study: A Case STudy of the UTC Ace Operating System  

E-Print Network [OSTI]

Homogenous Metals Incorporated (HMI) is a pioneer in adopting and demonstrating value from United Technology Corporation's (UTC's) ACE operating system. ACE stands for Achieving Competitive Excellence. The first story is ...

Roth, George

2009-10-06T23:59:59.000Z

414

Smart Operations of Air-Conditioning and Lighting Systems in a Government Buildings for Peak Power Reduction  

E-Print Network [OSTI]

This paper presents the achievements of implementing smart operations strategies for air-conditioning (A/C) and lighting systems in Justice Palace Complex (JPC), Kuwait during the summer 2007. The peak load of this building was 3700 k...

Al-Hadban, Y.; Maheshwari, G. P.; Al-Nakib, D.; Al-Mulla, A.; Alasseri, R.

2010-01-01T23:59:59.000Z

415

Development of a hybrid intelligent system for on-line real-time monitoring of nuclear power plant operations  

E-Print Network [OSTI]

A nuclear power plant (NPP) has an intricate operational domain involving systems, structures and components (SSCs) that vary in scale and complexity. Many of the large scale SSCs contribute to the lost availability in the ...

Yildiz, Bilge, 1976-

2003-01-01T23:59:59.000Z

416

INFLUENCE OF DESIGN AND OPERATING CONDITIONS ON UNDERFLOOR AIR DISTRIBUTION (UFAD) SYSTEM PERFORMANCE  

E-Print Network [OSTI]

Underfloor Air Distribution (UFAD) Design Guide. Atlanta:to design and operate underfloor air distribution (UFAD)DESIGN AND OPERATING CONDITIONS ON UNDERFLOOR AIR DISTRIBUTION (

2012-01-01T23:59:59.000Z

417

1Centre for Autonomous Marine Operations and Systems -AMOSwww.ntnu.edu/amos 2Centre for Autonomous Marine Operations and Systems -AMOSwww.ntnu.edu/amos  

E-Print Network [OSTI]

of Expertise Applications: Unmanned aerial systems (UAS) Autonomous underwater vehicles (AUV) Spacecraft structures Underwater robotics Mapping and monitoring of the ocean space Intelligent and autonomous systems High speed vehicles Simulator technology for marine systems Hardware-in-the-loop (HIL

Nrvg, Kjetil

418

Waste minimization plan construction and operation of the replacement cross-site transfer system, project W-058  

SciTech Connect (OSTI)

This report addresses the research and development of a waste minimization plan for the construction and operation of Project W-058, Replacement of the Cross-Site Transfer System, on the Hanford Site. The plan is based on Washington Administrative Code (WAC) 173-307, Plans. The waste minimization plan identifies areas where pollution prevention/waste minimization principles can be incorporated into the construction and operation of the cross-site transfer system.

Boucher, T.D.

1996-04-01T23:59:59.000Z

419

The Independent Technical Analysis Process  

SciTech Connect (OSTI)

The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. In the past, regional parties have interacted with a single entity, the Fish Passage Center to access the data, analyses, and coordination related to fish passage. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities.

Duberstein, Corey A.; Ham, Kenneth D.; Dauble, Dennis D.; Johnson, Gary E.

2007-04-13T23:59:59.000Z

420

Incentives for Energy Independence  

Broader source: Energy.gov [DOE]

In August 2007 Kentucky established the ''Incentives for Energy Independence Act'' to promote the development of renewable energy and alternative fuel facilities, energy efficient buildings,...

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

A power system includes an engine, a motor/generator operatively connected to the engine, and a starter operatively connected to at least one of the engine and the motor/generator.  

DOE Patents [OSTI]

A power system includes an engine, a motor/generator operatively connected to the engine, and a starter operatively connected to at least one of the engine and the motor/generator.

Hoff, Brian D. (East Peoria, IL); Algrain, Marcelo C. (Peoria, IL)

2008-12-09T23:59:59.000Z

422

Independent Oversight Activity Report, Office of River Protection...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

ORP's quality assurance audit of the WTP contractor (Bechtel National, Inc.), tour the Hanford Tank Farms, and observe tank waste retrieval operations. Independent Oversight...

423

affected children independent: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Espaces et Socits Boyer, Edmond 3 Utility & Regulatory Factors Affecting Cogeneration & Independent Power Plant Design & Operation Texas A&M University - TxSpace...

424

ADMINISTRATIVE AND ENGINEERING CONTROLS FOR THE OPERATION OF VENTILATION SYSTEMS FOR UNDERGROUND RADIOACTIVE WASTE STORAGE TANKS  

SciTech Connect (OSTI)

Liquid radioactive wastes from the Savannah River Site are stored in large underground carbon steel tanks. The majority of the waste is confined in double shell tanks, which have a primary shell, where the waste is stored, and a secondary shell, which creates an annular region between the two shells, that provides secondary containment and leak detection capabilities should leakage from the primary shell occur. Each of the DST is equipped with a purge ventilation system for the interior of the primary shell and annulus ventilation system for the secondary containment. Administrative flammability controls require continuous ventilation to remove hydrogen gas and other vapors from the waste tanks while preventing the release of radionuclides to the atmosphere. Should a leak from the primary to the annulus occur, the annulus ventilation would also serve this purpose. The functionality of the annulus ventilation is necessary to preserve the structural integrity of the primary shell and the secondary. An administrative corrosion control program is in place to ensure integrity of the tank. Given the critical functions of the purge and annulus ventilation systems, engineering controls are also necessary to ensure that the systems remain robust. The system consists of components that are constructed of metal (e.g., steel, stainless steel, aluminum, copper, etc.) and/or polymeric (polypropylene, polyethylene, silicone, polyurethane, etc.) materials. The performance of these materials in anticipated service environments (e.g., normal waste storage, waste removal, etc.) was evaluated. The most aggressive vapor space environment occurs during chemical cleaning of the residual heels by utilizing oxalic acid. The presence of NO{sub x} and mercury in the vapors generated from the process could potentially accelerate the degradation of aluminum, carbon steel, and copper. Once identified, the most susceptible materials were either replaced and/or plans for discontinuing operations are executed.

Wiersma, B.; Hansen, A.

2013-11-13T23:59:59.000Z

425

Wind Power Forecasting Error Frequency Analyses for Operational Power System Studies: Preprint  

SciTech Connect (OSTI)

The examination of wind power forecasting errors is crucial for optimal unit commitment and economic dispatch of power systems with significant wind power penetrations. This scheduling process includes both renewable and nonrenewable generators, and the incorporation of wind power forecasts will become increasingly important as wind fleets constitute a larger portion of generation portfolios. This research considers the Western Wind and Solar Integration Study database of wind power forecasts and numerical actualizations. This database comprises more than 30,000 locations spread over the western United States, with a total wind power capacity of 960 GW. Error analyses for individual sites and for specific balancing areas are performed using the database, quantifying the fit to theoretical distributions through goodness-of-fit metrics. Insights into wind-power forecasting error distributions are established for various levels of temporal and spatial resolution, contrasts made among the frequency distribution alternatives, and recommendations put forth for harnessing the results. Empirical data are used to produce more realistic site-level forecasts than previously employed, such that higher resolution operational studies are possible. This research feeds into a larger work of renewable integration through the links wind power forecasting has with various operational issues, such as stochastic unit commitment and flexible reserve level determination.

Florita, A.; Hodge, B. M.; Milligan, M.

2012-08-01T23:59:59.000Z

426

LDRD final report : a lightweight operating system for multi-core capability class supercomputers.  

SciTech Connect (OSTI)

The two primary objectives of this LDRD project were to create a lightweight kernel (LWK) operating system(OS) designed to take maximum advantage of multi-core processors, and to leverage the virtualization capabilities in modern multi-core processors to create a more flexible and adaptable LWK environment. The most significant technical accomplishments of this project were the development of the Kitten lightweight kernel, the co-development of the SMARTMAP intra-node memory mapping technique, and the development and demonstration of a scalable virtualization environment for HPC. Each of these topics is presented in this report by the inclusion of a published or submitted research paper. The results of this project are being leveraged by several ongoing and new research projects.

Kelly, Suzanne Marie; Hudson, Trammell B. (OS Research); Ferreira, Kurt Brian; Bridges, Patrick G. (University of New Mexico); Pedretti, Kevin Thomas Tauke; Levenhagen, Michael J.; Brightwell, Ronald Brian

2010-09-01T23:59:59.000Z

427

Palacios and Kitten : high performance operating systems for scalable virtualized and native supercomputing.  

SciTech Connect (OSTI)

Palacios and Kitten are new open source tools that enable applications, whether ported or not, to achieve scalable high performance on large machines. They provide a thin layer over the hardware to support both full-featured virtualized environments and native code bases. Kitten is an OS under development at Sandia that implements a lightweight kernel architecture to provide predictable behavior and increased flexibility on large machines, while also providing Linux binary compatibility. Palacios is a VMM that is under development at Northwestern University and the University of New Mexico. Palacios, which can be embedded into Kitten and other OSes, supports existing, unmodified applications and operating systems by using virtualization that leverages hardware technologies. We describe the design and implementation of both Kitten and Palacios. Our benchmarks show that they provide near native, scalable performance. Palacios and Kitten provide an incremental path to using supercomputer resources that is not performance-compromised.

Widener, Patrick (University of New Mexico); Jaconette, Steven (Northwestern University); Bridges, Patrick G. (University of New Mexico); Xia, Lei (Northwestern University); Dinda, Peter (Northwestern University); Cui, Zheng.; Lange, John (Northwestern University); Hudson, Trammell B.; Levenhagen, Michael J.; Pedretti, Kevin Thomas Tauke; Brightwell, Ronald Brian

2009-09-01T23:59:59.000Z

428

START-3: Operational evaluations of the ISUS engine ground demonstration thermionic power system  

SciTech Connect (OSTI)

START-3 was a test program conducted in order to demonstrate and characterize the operational performance of the prototype Integrated Solar Upper Stage (ISUS) thermionic power system. The test device consisted of a graphite thermal storage unit, multilayer foil insulation, and sixteen thermionic converters electrically connected in a series array. Several thermal input conditions were achieved during the test, which resulted in measuring converter performance at average converter hot shoe temperatures in the range of 1600 K to 2000 K. Results indicate that the thermionic converters did not perform as well as expected in the array configuration. Follow-on testing of the individual sixteen converters is currently being performed. {copyright} {ital 1999 American Institute of Physics.}

Wyant, Francis J. [Sandia National Laboratories, P.O. Box 5800, Albuquerque, New Mexico 87185 (United States)] Luke, James R. [New Mexico Engineering Research Institute, 901 University Blvd., SE, Albuquerque, New Mexico 87106 (United States)] Luchau, David W. [TEAM Specialty Services, Inc., 11030 Cochiti Rd., SE, Albuquerque, New Mexico 87123 (United States)

1999-01-01T23:59:59.000Z

429

Test and evaluation procedures for Sandia's Teraflops Operating System (TOS) on Janus.  

SciTech Connect (OSTI)

This report describes the test and evaluation methods by which the Teraflops Operating System, or TOS, that resides on Sandia's massively-parallel computer Janus is verified for production release. Also discussed are methods used to build TOS before testing and evaluating, miscellaneous utility scripts, a sample test plan, and a proposed post-test method for quickly examining the large number of test results. The purpose of the report is threefold: (1) to provide a guide to T&E procedures, (2) to aid and guide others who will run T&E procedures on the new ASCI Red Storm machine, and (3) to document some of the history of evaluation and testing of TOS. This report is not intended to serve as an exhaustive manual for testers to conduct T&E procedures.

Barnette, Daniel Wayne

2005-10-01T23:59:59.000Z

430

HYBRID ALARM SYSTEMS: COMBINING SPATIAL ALARMS AND ALARM LISTS FOR OPTIMIZED CONTROL ROOM OPERATION  

SciTech Connect (OSTI)

The US Department of Energy (DOE) is sponsoring research, development, and deployment on Light Water Reactor Sustainability (LWRS), in which the Idaho National Laboratory (INL) is working closely with nuclear utilities to develop technologies and solutions to help ensure the safe operational life extension of current nuclear power plants. One of the main areas of focus is control room modernization. Within control room modernization, alarm system upgrades present opportunities to meet the broader goals of the LWRS project in demonstrating the use and safety of the advanced instrumentation and control (I&C) technologies and the short-term and longer term objectives of the plant. In this paper, we review approaches for and human factors issues behind upgrading alarms in the main control room of nuclear power plants.

Ronald L. Boring; J.J. Persensky

2012-07-01T23:59:59.000Z

431

Operational Challenges in Gas-To-Liquid (GTL) Transportation Through Trans Alaska Pipeline System (TAPS)  

SciTech Connect (OSTI)

Oil production from Alaskan North Slope oil fields has steadily declined. In the near future, ANS crude oil production will decline to such a level (200,000 to 400,000 bbl/day) that maintaining economic operation of the Trans-Alaska Pipeline System (TAPS) will require pumping alternative products through the system. Heavy oil deposits in the West Sak and Ugnu formations are a potential resource, although transporting these products involves addressing important sedimentation issues. One possibility is the use of Gas-to-Liquid (GTL) technology. Estimated recoverable gas reserves of 38 trillion cubic feet (TCF) on the North Slope of Alaska can be converted to liquid with GTL technology and combined with the heavy oils for a product suitable for pipeline transport. Issues that could affect transport of this such products through TAPS include pumpability of GTL and crude oil blends, cold restart of the pipeline following a prolonged winter shutdown, and solids deposition inside the pipeline. This study examined several key fluid properties of GTL, crude oil and four selected blends under TAPS operating conditions. Key measurements included Reid Vapor Pressure, density and viscosity, PVT properties, and solids deposition. Results showed that gel strength is not a significant factor for the ratios of GTL-crude oil blend mixtures (1:1; 1:2; 1:3; 1:4) tested under TAPS cold re-start conditions at temperatures above - 20 F, although Bingham fluid flow characteristics exhibited by the blends at low temperatures indicate high pumping power requirements following prolonged shutdown. Solids deposition is a major concern for all studied blends. For the commingled flow profile studied, decreased throughput can result in increased and more rapid solid deposition along the pipe wall, resulting in more frequent pigging of the pipeline or, if left unchecked, pipeline corrosion.

Godwin A. Chukwu; Santanu Khataniar; Shirish Patil; Abhijit Dandekar

2006-06-30T23:59:59.000Z

432

The Effects of Degraded Digital Instrumentation and Control Systems on Human-system Interfaces and Operator Performance: HFE Review Guidance and Technical Basis  

SciTech Connect (OSTI)

New and advanced reactors will use integrated digital instrumentation and control (I&C) systems to support operators in their monitoring and control functions. Even though digital systems are typically highly reliable, their potential for degradation or failure could significantly affect operator performance and, consequently, impact plant safety. The U.S. Nuclear Regulatory Commission (NRC) supported this research project to investigate the effects of degraded I&C systems on human performance and plant operations. The objective was to develop human factors engineering (HFE) review guidance addressing the detection and management of degraded digital I&C conditions by plant operators. We reviewed pertinent standards and guidelines, empirical studies, and plant operating experience. In addition, we conducted an evaluation of the potential effects of selected failure modes of the digital feedwater system on human-system interfaces (HSIs) and operator performance. The results indicated that I&C degradations are prevalent in plants employing digital systems and the overall effects on plant behavior can be significant, such as causing a reactor trip or causing equipment to operate unexpectedly. I&C degradations can impact the HSIs used by operators to monitor and control the plant. For example, sensor degradations can make displays difficult to interpret and can sometimes mislead operators by making it appear that a process disturbance has occurred. We used the information obtained as the technical basis upon which to develop HFE review guidance. The guidance addresses the treatment of degraded I&C conditions as part of the design process and the HSI features and functions that support operators to monitor I&C performance and manage I&C degradations when they occur. In addition, we identified topics for future research.

O'Hara, J.M.; W. Gunther, G. Martinez-Guridi

2010-02-26T23:59:59.000Z

433

ENG EC/ME/SE 543 Sustainable Power Systems Page 1/5 ENG EC/ME/SE 543 Sustainable Power Systems: Planning, Operation, and Markets  

E-Print Network [OSTI]

reserves. While the procurement of capacity reserves and of energy can be achieved by market clearing #12 Systems: Planning, Operation, and Markets Spring 2012 Instructor, Michael C. Caramanis, mcaraman and presents their interaction in the design and operation of markets that foster competition and economic

434

Procceedings IFIP IEEE International Workshop on Distributed Systems: Operations and Management, October 15-16 1991, Santa Barbara, CA  

E-Print Network [OSTI]

Procceedings IFIP IEEE International Workshop on Distributed Systems: Operations and Management that the security o cer of each component system has discretion regarding the trust invested in other component points of security control. #12;2 THE SCHEMATIC PROTECTION MODEL GMU researchers have been active

Sandhu, Ravi

435

Hydro-ball in-core instrumentation system and method of operation  

DOE Patents [OSTI]

A hydro-ball in-core instrumentation system employs detector strings each comprising a wire having radiation sensitive balls affixed diametrically at spaced positions therealong and opposite tip ends of which are transportable by fluid drag through interior passageways. In the passageways primary coolant is caused to flow selectively in first and second opposite directions for transporting the detector strings from stored positions in an exterior chamber to inserted positions within the instrumentation thimbles of the fuel rod assemblies of a pressure vessel, and for return. The coolant pressure within the detector passageways is the same as that within the vessel; face contact, disconnectable joints between sections of the interior passageways within the vessel facilitate assembly and disassembly of the vessel for refueling and routine maintenance operations. The detector strings may pass through a very short bend radius thereby minimizing space requirements for the connections of the instrumentation system to the vessel and concomitantly the vessel containment structure. Improved radiation mapping and a significant reduction in potential exposure of personnel to radiation are provided. Both top head and bottom head penetration embodiments are disclosed.

Tower, Stephen N. (Washington Township, Westmoreland County, PA); Veronesi, Luciano (O'Hara Township, Allegheny County, PA); Braun, Howard E. (Pittsburgh, PA)

1990-01-01T23:59:59.000Z

436

SLUDGE TREATMENT PROJECT ENGINEERED CONTAINER RETRIEVAL AND TRANSFER SYSTEM PRELMINARY DESIGN HAZARD AND OPERABILITY STUDY  

SciTech Connect (OSTI)

This Hazard and Operability (HAZOP) study addresses the Sludge Treatment Project (STP) Engineered Container Retrieval and Transfer System (ECRTS) preliminary design for retrieving sludge from underwater engineered containers located in the 105-K West (KW) Basin, transferring the sludge as a sludge-water slurry (hereafter referred to as 'slurry') to a Sludge Transport and Storage Container (STSC) located in a Modified KW Basin Annex, and preparing the STSC for transport to T Plant using the Sludge Transport System (STS). There are six, underwater engineered containers located in the KW Basin that, at the time of sludge retrieval, will contain an estimated volume of 5.2 m{sup 3} of KW Basin floor and pit sludge, 18.4 m{sup 3} of 105-K East (KE) Basin floor, pit, and canister sludge, and 3.5 m{sup 3} of settler tank sludge. The KE and KW Basin sludge consists of fuel corrosion products (including metallic uranium, and fission and activation products), small fuel fragments, iron and aluminum oxide, sand, dirt, operational debris, and biological debris. The settler tank sludge consists of sludge generated by the washing of KE and KW Basin fuel in the Primary Clean Machine. A detailed description of the origin of sludge and its chemical and physical characteristics can be found in HNF-41051, Preliminary STP Container and Settler Sludge Process System Description and Material Balance. In summary, the ECRTS retrieves sludge from the engineered containers and hydraulically transfers it as a slurry into an STSC positioned within a trailer-mounted STS cask located in a Modified KW Basin Annex. The slurry is allowed to settle within the STSC to concentrate the solids and clarify the supernate. After a prescribed settling period the supernate is decanted. The decanted supernate is filtered through a sand filter and returned to the basin. Subsequent batches of slurry are added to the STSC, settled, and excess supernate removed until the prescribed quantity of sludge is collected. The sand filter is then backwashed into the STSC. The STSC and STS cask are then inerted and transported to T Plant.

CARRO CA

2011-07-15T23:59:59.000Z

437

Naval Postgraduate School Cyber Academic Group Graduation Checklist for MS Cyber Systems and Operations (CSO) Degree  

E-Print Network [OSTI]

Environment (3-2) ________ ___CY4700 Cyber Wargame: Blue Force Operations (2-5) ________ ___CY4710 Cyber Planned Qtr ___NW3230 Strategy & Policy (4-2) ________ ___NW3275 Joint Maritime Operations Part 1 (4-0) ________ ___NW3276 Joint Maritime Operations Part 2 (2-2) ________ ___NW3285 National Security Decision Making (4

438

Naval Postgraduate School Cyber Academic Group Graduation Checklist for MS Cyber Systems and Operations (CSO) Degree  

E-Print Network [OSTI]

Environment (3-2) ________ ___CY4700 Cyber Wargame: Blue Force Operations (2-5) ________ ___CY4710 Cyber Strategy & Policy (4-2) ________ ___NW3275 Joint Maritime Operations Part 1 (4-0) ________ ___NW3276 Joint and Operations (CSO) Degree 6208P Subspecialty Code (Effective for students commencing Fall AY11 to Winter AY13

439

Development and testing of a photometric method to identify non-operating solar hot water systems in field settings.  

SciTech Connect (OSTI)

This report presents the results of experimental tests of a concept for using infrared (IR) photos to identify non-operational systems based on their glazing temperatures; operating systems have lower glazing temperatures than those in stagnation. In recent years thousands of new solar hot water (SHW) systems have been installed in some utility districts. As these numbers increase, concern is growing about the systems dependability because installation rebates are often based on the assumption that all of the SHW systems will perform flawlessly for a 20-year period. If SHW systems routinely fail prematurely, then the utilities will have overpaid for grid-energy reduction performance that is unrealized. Moreover, utilities are responsible for replacing energy for loads that failed SHW system were supplying. Thus, utilities are seeking data to quantify the reliability of SHW systems. The work described herein is intended to help meet this need. The details of the experiment are presented, including a description of the SHW collectors that were examined, the testbed that was used to control the system and record data, the IR camera that was employed, and the conditions in which testing was completed. The details of the associated analysis are presented, including direct examination of the video records of operational and stagnant collectors, as well as the development of a model to predict glazing temperatures and an analysis of temporal intermittency of the images, both of which are critical to properly adjusting the IR camera for optimal performance. Many IR images and a video are presented to show the contrast between operating and stagnant collectors. The major conclusion is that the technique has potential to be applied by using an aircraft fitted with an IR camera that can fly over an area with installed SHW systems, thus recording the images. Subsequent analysis of the images can determine the operational condition of the fielded collectors. Specific recommendations are presented relative to the application of the technique, including ways to mitigate and manage potential sources of error.

He, Hongbo (University of New Mexico, Albuquerque, NM); Vorobieff, Peter V. (University of New Mexico, Albuquerque, NM); Menicucci, David (University of New Mexico, Albuquerque, NM); Mammoli, Andrea A. (University of New Mexico, Albuquerque, NM); Carlson, Jeffrey J.

2012-06-01T23:59:59.000Z

440

LESSONS LEARNED IN OPERATING THE HOSE-IN-HOSE SYSTEM FOR TRANSFSERRING SLUDGE AT HANFORDS K-BASINS  

SciTech Connect (OSTI)

In May 2007, the Department of Energy and the Fluor Hanford K Basin Closure Project completed transferring sludge from the K East Basin to new containers in the K West Basin using a Hose-in-Hose system. This project presented a number of complex and unique technical, operational, and management challenges that had to be resolved to complete the required transfers and satisfy project milestones. The project team (including DOE; regulators; and Fluor management, operations, maintenance, engineering and all other support organizations) found innovative solutions to each challenge. This paper records lessons learned during the operational phase of the sludge transfer via the Hose-In-Hose system. The subject is limited to the operational phase and does not cover design, development, testing or turnover. A discussion of the situation or problem encountered is provided, along with the lesson learned as applicable to a future program or project.

PERES MW

2008-01-07T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Guide to Combined Heat and Power Systems for Boiler Owners and Operators  

SciTech Connect (OSTI)

Combined heat and power (CHP) or cogeneration is the sequential production of two forms of useful energy from a single fuel source. In most CHP applications, chemical energy in fuel is converted to both mechanical and thermal energy. The mechanical energy is generally used to generate electricity, while the thermal energy or heat is used to produce steam, hot water, or hot air. Depending on the application, CHP is referred to by various names including Building Cooling, Heating, and Power (BCHP); Cooling, Heating, and Power for Buildings (CHPB); Combined Cooling, Heating, and Power (CCHP); Integrated Energy Systems (IES), or Distributed Energy Resources (DER). The principal technical advantage of a CHP system is its ability to extract more useful energy from fuel compared to traditional energy systems such as conventional power plants that only generate electricity and industrial boiler systems that only produce steam or hot water for process applications. By using fuel energy for both power and heat production, CHP systems can be very energy efficient and have the potential to produce electricity below the price charged by the local power provider. Another important incentive for applying cogeneration technology is to reduce or eliminate dependency on the electrical grid. For some industrial processes, the consequences of losing power for even a short period of time are unacceptable. The primary objective of the guide is to present information needed to evaluate the viability of cogeneration for new or existing industrial, commercial, and institutional (ICI) boiler installations and to make informed CHP equipment selection decisions. Information presented is meant to help boiler owners and operators understand the potential benefits derived from implementing a CHP project and recognize opportunities for successful application of cogeneration technology. Topics covered in the guide follow: (1) an overview of cogeneration technology with discussions about benefits of applying cogeneration technology and barriers to implementing cogeneration technology; (2) applicable federal regulations and permitting issues; (3) descriptions of prime movers commonly used in CHP applications, including discussions about design characteristics, heat-recovery options and equipment, fuels and emissions, efficiency, maintenance, availability, and capital cost; (4) electrical generators and electrical interconnection equipment; (5) cooling and dehumidification equipment; (6) thermodynamic cycle options and configurations; (7) steps for evaluating the technical and economic feasibility of applying cogeneration technology; and (8) information sources.

Oland, CB

2004-08-19T23:59:59.000Z

442

The Independent Technical Analysis Process Final Report 2006-2007.  

SciTech Connect (OSTI)

The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities. The Independent Technical Analysis Process (ITAP) was created to provide non-routine analysis for fish and wildlife agencies and tribes in particular and the public in general on matters related to juvenile and adult salmon and steelhead passage through the mainstem hydrosystem. The process was designed to maintain the independence of analysts and reviewers from parties requesting analyses, to avoid potential bias in technical products. The objectives identified for this project were to administer a rigorous, transparent process to deliver unbiased technical assistance necessary to coordinate recommendations for storage reservoir and river operations that avoid potential conflicts between anadromous and resident fish. Seven work elements, designated by numbered categories in the Pisces project tracking system, were created to define and accomplish project goals as follows: (1) 118 Coordination - Coordinate technical analysis and review process: (a) Retain expertise for analyst/reviewer roles. (b) Draft research directives. (c) Send directive to the analyst. (d) Coordinate two independent reviews of the draft report. (e) Ensure reviewer comments are addressed within the final report. (2) 162 Analyze/Interpret Data - Implement the independent aspects of the project. (3) 122 Provide Technical Review - Implement the review process for the analysts. (4) 132 Produce Annual Report - FY06 annual progress report with Pisces Disseminate (5) 161 Disseminate Raw/Summary Data and Results - Post technical products on the ITAP web site. (6) 185-Produce Pisces Status Report - Provide periodic status reports to BPA. (7) 119 Manage and Administer Projects - project/contract administration.

Duberstein, Corey; Ham, Kenneth; Dauble, Dennis; Johnson, Gary [Pacific Northwest National Laboratory

2007-03-01T23:59:59.000Z

443

EVALUATION OF BEST AVAILABLE CONTROL TECHNOLOGY FOR TOXICS -TBACT- DOUBLE SHELL TANK FARMS PRIMARY VENTILATION SYSTEMS SUPPORTING WASTE TRANSFER OPERATIONS  

SciTech Connect (OSTI)

This report is an evaluation of Best Available Control Technology for Toxics (tBACT) for installation and operation of the Hanford double shell (DST) tank primary ventilation systems. The DST primary ventilation systems are being modified to support Hanford's waste retrieval, mixing, and delivery of single shell tank (SST) and DST waste through the DST storage system to the Waste Treatment and Immobilizaiton Plant (WTP).

HAAS CC; KOVACH JL; KELLY SE; TURNER DA

2010-06-24T23:59:59.000Z

444

EVALUATION OF BEST AVAILABLE CONTROL TECHNOLOGY FOR TOXICS (TBACT) DOUBLE SHELL TANK FARMS PRIMARY VENTILATION SYSTEM SUPPORTING WASTE TRANSFER OPERATIONS  

SciTech Connect (OSTI)

This report is an evaluation of Best Available Control Technology for Toxics (tBACT) for installation and operation of the Hanford double shell (DST) tank primary ventilation systems. The DST primary ventilation systems are being modified to support Hanford's waste retrieval, mixing, and delivery of single shell tank (SST) and DST waste throught the DST storage system to the Waste Treatment and Immobilization Plant (WTP).

KELLY SE; HAASS CC; KOVACH JL; TURNER DA

2010-06-03T23:59:59.000Z

445

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that will be tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

Michael D. Durham

2003-05-01T23:59:59.000Z

446

Operational feasibility of underwater Stirling engine systems using oxygen-seawater extraction  

SciTech Connect (OSTI)

The exploration of the oceans whether for societal, commercial, scientific or military reasons requires efficient and cost effective underwater vehicles. In turn, these vessels require efficient means of producing on board power for the propulsion and hotel load requirements of long endurance missions. The Stirling engine, because of its inherent closed-cycle operation, has long been an attractive candidate for underwater use and now has proved its reliability and maintainability in the arduous environment of a naval submarine application. More recently the Stirling has been considered for use in small long endurance unmanned underwater vessels (UUVs). However, with these type of vehicles the need to carry an on board oxygen supply in a very confined space has presented a number of design problems. The concept of using multi-stage vehicles with disposable energy pods has been explored and appears attractive although a major change in submarine design philosophy will be required if such vehicles are to launched from submarines. Another approach is to use a more space efficient source of oxygen. As seawater contains dissolved oxygen then if this source could be utilized to meet all or at least part of the engine`s need than a major design problem could be overcome. In this paper the findings of an initial study into the use of membranes or artificial gill techniques to provide oxygen for a Stirling powered DARPA type vehicle are presented. It has been found that only in certain sea areas is the concept of oxygen extraction feasible for use with power systems. Even in situations where there are sufficient levels of dissolved oxygen the gill system approach appears to have limited utility for UUV applications and a number of practical problems still need to be addressed.

Potter, I.J.; Reader, G.T. [Univ. of Calgary, Alberta (Canada). Dept. of Mechanical Engineering

1995-12-31T23:59:59.000Z

447

Columbia River System Operation Review : Final Environmental Impact Statement, Appendix D: Cultural Resources.  

SciTech Connect (OSTI)

This study attempts to identify and analyze the impacts of the System Operating Strategy (SOS) alternatives on cultural resources. The impacts include effects on Native American traditional cultural values, properties and practices. They also include effects on archeological or historic properties meeting the criteria of the National Register of Historic Places. In addition to responding to the requirements of the National Environmental Policy Act (NEPA), this analysis addresses the requirements of the National Historic Preservation Act (NHPA), the Archeological Resources Protection Act (ARPA), the Native American Graves Protection and Repatriation Act (NAGPRA), the Native American Religious Freedom Act (NARFA), and other relevant legislation. To meet their legally mandated cultural resources requirements, the SOR agencies will develop agreements and Implementation Plans with the appropriate State Historic Preservation Officers (SHPOs), Tribes, and the Advisory Council on Historic Preservation (ACHP) detailing the measures necessary to best manage the resource. The planning and implementation activities will be staged over a number of years in consultation with affected Tribes.

Columbia River System Operation Review (U.S.)

1995-11-01T23:59:59.000Z

448

Operating experience with a liquid-hydrogen fueled Buick and refueling system  

SciTech Connect (OSTI)

An investigation of liquid-hydrogen storage and refueling systems for vehicular applications was made in a recently completed project. The vehicle used in the project was a 1979 Buick Century sedan with a 3.8-L displacement turbocharged V6 engine and an automatic transmission. The vehicle had a fuel economy for driving in the high altitude Los Alamos area that was equivalent to 2.4 km/L of liquid hydrogen or 8.9 km/L of gasoline on an equivalent energy basis. About 22% less energy was required using hydrogen rather than gasoline to go a given distance based on the Environmental Protection Agency estimate of 7.2 km/L of gasoline for this vehicle. At the end of the project the engine had been operated for 138 h and the car driven 3633 km during the 17 months that the vehicle was operated on hydrogen . Two types of onboard liquid-hydrogen storage tanks were tested in the vehicle: the first was an aluminum Dewar with a liquid-hydrogen capacity of 110 L; the second was a Dewar with an aluminum outer vessel, two copper vapor-cooled thermal radiation shields, and a stainless steel inner vessel with a liquid-hydrogen capacity of 155 L. The Buick had an unrefueled range of about 274 km with the first liquid-hydrogen tank and about 362 km with the second. The Buick was fueled at least 65 times involving a minimum of 8.1 kL of liquid hydrogen using various liquid-hydrogen storage Dewars at Los Alamos and a semiautomatic refueling station. A refueling time of nine minutes was achieved, and liquid hydrogen losses during refueling were measured. The project has demonstrated that liquid-hydrogen storage onboard a vehicle, and its refueling, can be accomplished over an extended period without any major difficulties; nevertheless, appropriate testing is still needed to quantitatively address the question of safety for liquid-hydrogen storage onboard a vehicle.

Stewart, W.F.

1982-01-01T23:59:59.000Z

449

Operational hydro-meteorological warning and real-time flood forecasting:the Piemonte region case study Hydrology and Earth System Sciences, 9(4), 457466 (2005) EGU  

E-Print Network [OSTI]

Operational hydro-meteorological warning and real-time flood forecasting:the Piemonte region case study 457 Hydrology and Earth System Sciences, 9(4), 457466 (2005) © EGU Operational hydro forecasting system in the context of the Piemonte Regions hydro-meteorological operational alert procedure

Paris-Sud XI, Université de

450

Evaluation of the megawatt demand setter for load-follow operation of C-E's SYSTEM 80+  

SciTech Connect (OSTI)

The Megawatt Demand Setter (MDS) is a digital supervisory control system that automatically assures that the turbine load is consistent with plant operating limits for critical parameters. The MDS is designed to avert plant trips by limiting the load demand during load transients and by reducing the turbine load if plant operating limits are approached or violated. The MDS, devised and patented by Combustion Engineering, Inc., in the 1970s for automatic load dispatching, has been installed at two plants. Those plants have since been operated in a base-load capacity, however, and have not needed to implement the load-follow capabilities of the MDS. As the percentage of electricity generated by nuclear units increases, the need to implement such load-follow capabilities will also increase. Combustion Engineering intends to incorporate improved load-follow capability in its SYSTEM 80+ nuclear steam supply system (NSSS) design. One aspect of this will be incorporation of the MDS in the design of the NUPLEX 80+ advanced control complex for system 80+. This paper presents an evaluation of two major design features of the MDS for load-follow operation based on simulation of SYSTEM 80+ plant responses.

Choi, J.I.; Scarola, K.

1989-01-01T23:59:59.000Z

451

Operation Poorman  

SciTech Connect (OSTI)

The objectives of Operation Poorman were to design and build a portable seismic system and to set up and use this system in a cold-weather environment. The equipment design uses current technology to achieve a low-power, lightweight system that is configured into three modules. The system was deployed in Alaska during wintertime, and the results provide a basis for specifying a mission-ready seismic verification system.

Pruvost, N.; Tsitouras, J.

1981-03-18T23:59:59.000Z

452

Project W-211, initial tank retrieval systems, description of operations for 241-AP-102 and 241-AP-104  

SciTech Connect (OSTI)

The primary purpose of the Initial Tank Retrieval Systems (ITRS) is to provide systems for retrieval of radioactive wastes stored in underground double-shell tanks (DSTS) for transfer to alternate storage, evaporation, pretreatment or treatment, while concurrently reducing risks associated with safety watch list and other DSTs. This Description of Operations (DOO) defines the control philosophy for the waste retrieval system for tanks 241-AP-102 (AP-102) and 241-AP-104 (AP-104). This DOO will provide a basis for the detailed design of the Retrieval Control System (RCS) for AP-102 and AP-104 and establishes test criteria for the RCS. The test criteria will be used during qualification testing and acceptance testing to verify operability.

RIECK, C.A.

1999-02-25T23:59:59.000Z

453

Green Scheduling of Control Systems for Peak Demand Reduction Truong X. Nghiem, Madhur Behl, Rahul Mangharam and George J. Pappas  

E-Print Network [OSTI]

and refrigeration operate independently of each other and frequently result in temporally correlated energy demand of energy demand by scheduling the control systems within a constrained peak while ensuring custom climate and refrigeration (HVAC&R) systems, chiller sys- tems, and lighting systems operate independently of each other

Pappas, George J.

454

Tank waste remediation system operation and utilization plan,vol. I {ampersand} II  

SciTech Connect (OSTI)

The U.S. Department of Energy Richland Operations Office (RL) is in the first stages of contracting with private companies for the treatment and immobilization of tank wastes. The components of tank waste retrieval, treatment, and immobilization have been conceived in two phases (Figure 1.0-1). To meet RL's anticipated contractual requirements, the Project Hanford Management Contractor (PHMC) companies will be required to provide waste feeds to the private companies consistent with waste envelopes that define the feeds in terms of quantity, and concentration of both chemicals and radionuclides. The planning that supports delivery of the feed must be well thought out in four basic areas: (1) Low-activity waste (LAW)/high-level waste (HLW) feed staging plans. How is waste moved within the existing tanks to deliver waste that corresponds to the defined feed envelopes to support the Private Contractor's processing schedule and processing rate? (2) Single-shell tank (SST) retrieval sequence. How are Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) (Ecology et al. 1994) milestones for SST retrieval integrated into the Phase I processing to set the stage for Phase II processing to complete the mission? (3) Tank Waste Remediation System (TWRS) process flowsheet. How do materials flow from existing tank inventories through: (1) blending and pretreatment functions in the double-shell tanks (DSTs), (2) contractor processing facilities, and (3) stored waste forms (Figure 1.0-2); (4) Storage and disposal of the immobilized low-activity waste (ILAW) and immobilized high-level waste (IHLW) product. How is the ILAW and IHLW product received from the private companies, the ILAW disposed onsite, and the IHLW stored onsite until final disposal?

Kirkbride, R.A.

1997-09-01T23:59:59.000Z

455

Human Factors Guidance for Control Room and Digital Human-System Interface Design and Modification, Guidelines for Planning, Specification, Design, Licensing, Implementation, Training, Operation and Maintenance  

SciTech Connect (OSTI)

Nuclear plant operators face a significant challenge designing and modifying control rooms. This report provides guidance on planning, designing, implementing and operating modernized control rooms and digital human-system interfaces.

R. Fink, D. Hill, J. O'Hara

2004-11-30T23:59:59.000Z

456

Operations of a Radioisotope-based Propulsion System Enabling CubeSat Exploration of the Outer Planets  

SciTech Connect (OSTI)

Exploration to the outer planets is an ongoing endeavor but in the current economical environment, cost reduction is the forefront of all concern. The success of small satellites such as CubeSats launched to Near-Earth Orbit has lead to examine their potential use to achieve cheaper science for deep space applications. However, to achieve lower cost missions; hardware, launch and operations costs must be minimized. Additionally, as we push towards smaller exploration beds with relative limited power sources, allowing for adequate communication back to Earth is imperative. Researchers at the Center for Space Nuclear Research are developing the potential of utilizing an advanced, radioisotope-based system. This system will be capable of providing both the propulsion power needed to reach the destination and the additional requirements needed to maintain communication while at location. Presented here are a basic trajectory analysis, communication link budget and concept of operations of a dual-mode (thermal and electric) radioisotope-based propulsion system, for a proposed mission to Enceladus (Saturnian icy moon) using a 6U CubeSat payload. The radioisotope system being proposed will be the integration of three sub-systems working together to achieve the overall mission. At the core of the system, stored thermal energy from radioisotope decay is transferred to a passing propellant to achieve high thrust useful for quick orbital maneuvering. An auxiliary closed-loop Brayton cycle can be operated in parallel to the thrusting mode to provide short bursts of high power for high data-rate communications back to Earth. Additionally, a thermal photovoltaic (TPV) energy conversion system will use radiation heat losses from the core. This in turn can provide the electrical energy needed to utilize the efficiency of ion propulsion to achieve quick interplanetary transit times. The intelligent operation to handle all functions of this system under optimized conditions adds to the complexity of the mission architecture.

Dr. Steven Howe; Nathan Jerred; Troy Howe; Adarsh Rajguru

2014-05-01T23:59:59.000Z

457

EA-1982: Parker-Davis Transmission System Routine Operation and Maintenance Project and Proposed Integrated Vegetation Management Plan  

Broader source: Energy.gov [DOE]

Western Area Power Administration (Western) is preparing an EA to assess potential environmental impacts of the proposed continuation of operations and maintenance activities and implementation of a vegetation management program on Westerns Parker-Davis Transmission System. These actions would occur on existing transmission line and access road rights-of-way, and at substations and maintenance facilities associated with the transmission system.

458

Synchronized operation by field programmable gate array based signal controller for the Thomson scattering diagnostic system in KSTAR  

SciTech Connect (OSTI)

The Thomson scattering diagnostic system is successfully installed in the Korea Superconducting Tokamak Advanced Research (KSTAR) facility. We got the electron temperature and electron density data for the first time in 2011, 4th campaign using a field programmable gate array (FPGA) based signal control board. It operates as a signal generator, a detector, a controller, and a time measuring device. This board produces two configurable trigger pulses to operate Nd:YAG laser system and receives a laser beam detection signal from a photodiode detector. It allows a trigger pulse to be delivered to a time delay module to make a scattered signal measurement, measuring an asynchronous time value between the KSTAR timing board and the laser system injection signal. All functions are controlled by the embedded processor running on operating system within a single FPGA. It provides Ethernet communication interface and is configured with standard middleware to integrate with KSTAR. This controller has operated for two experimental campaigns including commissioning and performed the reconfiguration of logic designs to accommodate varying experimental situation without hardware rebuilding.

Lee, W. R.; Park, M. K.; Lee, J. H. [National Fusion Research Institute, Gwahangno 113, Daejeon 305-333 (Korea, Republic of); Kim, H. S. [Chungnam National University, Daehak-ro 99, Daejeon 305-764 (Korea, Republic of); Kim, K. H. [Seed Core Co., Ltd., Daehak-ro 99, Daejeon 305-764 (Korea, Republic of)

2012-09-15T23:59:59.000Z

459

1D+4D-VAR data assimilation of lightning with WRFDA system using nonlinear observation operators  

E-Print Network [OSTI]

1 1D+4D-VAR data assimilation of lightning with WRFDA system using nonlinear observation operators of assimilating data from the Earth Networks Total Lightning Network (ENTLN) during two cases of severe weather Mapper (GLM). We use the Weather Research and Forecast (WRF) model and variational data assimilation

Navon, Michael

460

Development of a Remotely Operated NDE System for Inspection of Hanford's Double Shell Waste Tank Knuckle Regions  

SciTech Connect (OSTI)

This report documents work performed at the PNNL in FY01 to support development of a Remotely Operated NDE (RONDE) system capable of inspecting the knuckle region of Hanford's DSTs. The development effort utilized commercial off-the-shelf (COTS) technology wherever possible and provided a transport and scanning device for implementing the SAFT and T-SAFT techniques.

Pardini, Allan F; Alzheimer, James M; Crawford, Susan L; Diaz, Aaron A; Gervais, Kevin L; Harris, Robert V; Riechers, Douglas M; Samuel, Todd J; Schuster, George J; Tucker, Joseph C

2001-09-28T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Molten-Caustic-Leaching (MCL or Gravimelt) System Integration Project. Topical report for test circuit operation  

SciTech Connect (OSTI)

This is a report of the results obtained from the operation of an integrated test circuit for the Molten-Caustic-Leaching (MCL or Gravimelt) process for the desulfurization and demineralization of coal. The objectives of operational testing of the 20 pounds of coal per hour integrated MCL test circuit are: (1) to demonstrate the technical capability of the process for producing a demineralized and desulfurized coal that meets New Source Performance Standards (NSPS); (2) to determine the range of effective process operation; (3) to test process conditions aimed at significantly lower costs; and (4) to deliver product coal.

Not Available

1990-11-01T23:59:59.000Z

462

Entropic analysis of a dual-mode scramjet engine for system performance/operability enhancement .  

E-Print Network [OSTI]

??"Recent analytical advances in understanding the performance range (thermodynamic spectrum) for air-breathing engines based upon fundamental second-law considerations have clarified scramjet and ramjet operation, performance, (more)

Tackett, Regan, 1978-

2007-01-01T23:59:59.000Z

463

System dynamics modeling for human performance in nuclear power plant operation  

E-Print Network [OSTI]

Perfect plant operation with high safety and economic performance is based on both good physical design and successful organization. However, in comparison with the affection that has been paid to technology research, the ...

Chu, Xinyuan

2006-01-01T23:59:59.000Z

464

Safety Considerations for Operation of Unmanned Aerial Vehicles in the National Airspace System  

E-Print Network [OSTI]

There is currently a broad effort underway in the United States and internationally by several organizations to craft regulations enabling the safe operation of UAVs in the NAS. Current federal regulations governing unmanned ...

Weibel, Roland E

2006-11-21T23:59:59.000Z

465

Lean Implementation Considerations in Factory Operations of Low Volume/High Complexity Production Systems  

E-Print Network [OSTI]

The researchers of the Lean Aircraft Initiative developed a hypothesized lean implementation model seeking to provide its members guidance on implementing lean transitions in factory operations of low volume/high complexity ...

Shields, Thomas J.

466

Optimization of Fuel Cell System Operating Conditions for Fuel Cell Vehicles  

E-Print Network [OSTI]

A.F. Burke, Modeling and Optimization of PEMFC Systems andPEM Fuel Cell System Optimization, Proceedings of the 2 ndof the fuel cell system optimization model Fig. 5 Flowchart

Zhao, Hengbing; Burke, Andy

2008-01-01T23:59:59.000Z

467

Effects of Biodiesel Operation on Light-Duty Tier 2 Engine and Emission Control Systems: Preprint  

SciTech Connect (OSTI)

This paper documents the impact of biodiesel blends on engine-out emissions as well as overall system performance in terms of emissions control system calibration and overall system efficiency.

Tatur, M.; Nanjundaswamy, H.; Tomazic, D.; Thornton, M.

2008-08-01T23:59:59.000Z

468

Wilson polynomials/functions and intertwining operators for the generic quantum superintegrable system on the 2-sphere  

E-Print Network [OSTI]

It has been known since 2007 that the Wilson and Racah polynomials can be characterized as basis functions for irreducible representations of the quadratic symmetry algebra of the quantum superintegrable system on the 2-sphere, $H\\Psi=E\\Psi$, with generic 3-parameter potential. Clearly, the polynomials are expansion coefficients for one eigenbasis of a symmetry operator $L_1$ of $H$ in terms of an eigenbasis of another symmetry operator $L_2$, but the exact relationship appears not to have been made explicit. We work out the details of the expansion to show, explicitly, how the polynomials arise and how the principal properties of these functions: the measure, 3-term recurrence relation, 2nd order difference equation, duality of these relations, permutation symmetry, intertwining operators and an alternate derivation of Wilson functions -- follow from the symmetry of this quantum system. There is active interest in the relation between multivariable Wilson polynomials and the quantum superintegrable system on the $n$-sphere with generic potential, and these results should aid in the generalization. Contracting function space realizations of irreducible representations of this quadratic algebra to the other superintegrable systems one can obtain the full Askey scheme of orthogonal hypergeometric polynomials. All of these contractions of superintegrable systems with potential are uniquely induced by Wigner Lie algebra contractions of $so(3, C )$ and $e(2, C)$. All of the polynomials produced are interpretable as quantum expansion coefficients. It is important to extend this process to higher dimensions.

Willard Miller Jr; Qiushi Li

2015-01-09T23:59:59.000Z

469

Intelligent Building Energy Information and Control Systems for Low-Energy Operations and Optimal Demand Response  

E-Print Network [OSTI]

As we developlow?energybuildings,theneedformodelsBuilding Energy Information and Control Systems for Low-Building Energy Information and Control Systems for Low

Piette, Mary Ann

2014-01-01T23:59:59.000Z

470

FINITE ELEMENT MODEL OF MICROELECTROMECHANICAL SYSTEMS SWITCH OPERATING AT MICROWAVE FREQUENCIES  

E-Print Network [OSTI]

1244 JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 14, NO. 6, DECEMBER 2005 Third, Duffing oscillator, intermediate frequency, microelectromechanical systems (MEMS), mixer, non- linear

De Flaviis, Franco

471

PURPOSE: This product provides simulation capabilities to allow water resource managers to meet operational and water quality objectives in a basin wide approach under the System-Wide  

E-Print Network [OSTI]

Manage- ment System (CWMS). ERDC TN-SWWRP-11-2 February 2011 Meeting Water Quality and Water Control operational and water quality objectives in a basin wide approach under the System-Wide Water Resources the impact of water quality in reservoir operations system decision-making. As a result, integration

US Army Corps of Engineers

472

Preliminary Retro-Commissioning Study on Optimal Operation for the Heat Source System of a District Heating Cooling Plant  

E-Print Network [OSTI]

Heating Water Suuply Chilled Water Return Heating Water Return To User New System ESL-IC-08-10-57 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 2 attract attention due..., R6 450 1, 1 ESL-IC-08-10-57 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 3 (one office building and one building with hotel rooms and leisure facilities) since November...

Shingu, H.; Yoshida, H.; Wang, F.; Ono, E.

473

SystemBurn: Principles of Design and Operation, Release 2.0  

SciTech Connect (OSTI)

As high performance computing technology progresses toward the progressively more extreme scales required to address critical computational problems of both national and global interest, power and cooling for these extreme scale systems is becoming a growing concern. A standardized methodology for testing system requirements under maximal system load and validating system environmental capability to meet those requirements is critical to maintaining system stability and minimizing power and cooling risks for high end data centers. Moreover, accurate testing permits the high end data center to avoid issues of under- or over-provisioning power and cooling capacity saving resources and mitigating hazards. Previous approaches to such testing have employed an ad hoc collection of tools, which have been anecdotally perceived to produce a heavy system load. In this report, we present SystemBurn, a software tool engineered to allow a system user to methodically create a maximal system load on large scale systems for the purposes of testing and validation.

Kuehn, Jeffery A [ORNL; Poole, Stephen W [ORNL; Hodson, Stephen W [ORNL; Lothian, Josh [ORNL; Dobson, Jonathan D [ORNL; Reister, David B [ORNL; Lewkow, Nicholas R [ORNL; Glandon, Steven R [ORNL; Peek, Jacob T [ORNL

2012-01-01T23:59:59.000Z

474

SystemBurn: Principles of Design and Operation Release 3.0  

SciTech Connect (OSTI)

As high performance computing technology progresses toward the progressively more extreme scales required to address critical computational problems of both national and global interest, power and cooling for these extreme scale systems is becoming a growing concern. A standardized methodology for testing system requirements under maximal system load and validating system environmental capability to meet those requirements is critical to maintaining system stability and minimizing power and cooling risks for high end data centers. Moreover, accurate testing permits the high end data center to avoid issues of under- or over-provisioning power and cooling capacity saving resources and mitigating hazards. Previous approaches to such testing have employed an ad hoc collection of tools, which have been anecdotally perceived to produce a heavy system load. In this report, we present SystemBurn, a software tool engineered to allow a system user to methodically create a maximal system load on large scale systems for the purposes of testing and validation.

Dobson, Jonathan D [ORNL; Kuehn, Jeffery A [ORNL; Poole, Stephen W [ORNL; Hodson, Stephen W [ORNL; Glandon, Steven R [ORNL; Reister, David B [ORNL; Lewkow, Nicholas R [ORNL; Peek, Jacob T [ORNL

2012-09-01T23:59:59.000Z

475

Independent Statistics & Analysis  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for planningto FuelIndependent Statistics & Analysis

476

Examination of VRLA cells sampled from a battery energy storage system (BESS) after 30-months of operations  

SciTech Connect (OSTI)

Valve-Regulated Lead-Acid (VRLA) batteries continue to be employed in a wide variety of applications for telecommunications and Uninterruptible Power Supply (UPS). With the rapidly growing penetration of internet services, the requirements for standby power systems appear to be changing. For example, at last year's INTELEC, high voltage standby power systems up to 300-vdc were discussed as alternatives to the traditional 48-volt power plant. At the same time, battery reliability and the sensitivity of VRLAS to charging conditions (e.g., in-rush current, float voltage and temperature), continue to be argued extensively. Charge regimes which provide off-line charging or intermittent charge to the battery have been proposed. Some of these techniques go against the widely accepted rules of operation for batteries to achieve optimum lifetime. Experience in the telecom industry with high voltage systems and these charging scenarios is limited. However, GNB has several years of experience in the installation and operation of large VRLA battery systems that embody many of the power management philosophies being proposed. Early results show that positive grid corrosion is not accelerated and battery performance is maintained even when the battery is operated at a partial state-of-charge for long periods of time.

SZYMBORSKI,JOSEPH; HUNT,GEORGE; TSAGALIS,ANGELO; JUNGST,RUDOLPH G.

2000-06-08T23:59:59.000Z

477

Independent Oversight Targeted Review of the Safety Significant Blast Door and Personnel Door Interlock Systems and Review of Federal Assurance Capability at the Pantex Plant, December 2013  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartment ofTheDepartment of2012 |Department of2008Independent

478

Production-scale LLW and RMW solidification system operational testing at Argonne National Laboratory-East (ANL-E)  

SciTech Connect (OSTI)

Argonne National Laboratory-East (ANL-E) has begun production-scale testing of a low-level waste and radioactive mixed waste solidification system. This system will be used to treat low-level and mixed radioactive waste to meet land burial requirements. The system can use any of several types of solidification media, including a chemically bonded phosphate ceramic developed by ANL-E scientists. The final waste product will consist of a solidified mass in a standard 208-liter drum. The system uses commercial equipment and incorporates several unique process control features to ensure proper treatment. This paper will discuss the waste types requiring treatment, the system configuration, and operation results for these waste streams.

Wescott, J.; Wagh, A.; Singh, D. [Argonne National Lab., IL (United States); Nelson, R. [Sargent and Lundy, Chicago, IL (United States); No, H. [H and P, Inc., Vienna, VA (United States)

1997-04-01T23:59:59.000Z

479

Assessment of the Plutonium Finishing Plant Criticality Alarm System U.S. Department of Energy Richland Operations Office  

SciTech Connect (OSTI)

At the request of the Assistant Manager for Safety and Engineering, the U.S. Department of Energy Richland Operations Office (RL) Engineering Support Division, performed an oversight review of the Plutonium Finishing Plant (PFP) nuclear Criticality Alarm System (CAS). The review was conducted to satisfy requirements and agreements associated with Defense Nuclear Facility Safety Board (DNFSB) Recommendation 2000-2, ''Vital Safety Systems.'' The PFP is managed by Fluor Hanford, Inc. for RL. The field assessment and staff interviews were conducted August 12 through August 19,2002. This was a limited scope assessment that consisted of a review of the nuclear CAS operations, maintenance, and compliance with National Consensus Standards Requirements. The main purpose of the assessment was to determine the adequacy of the existing alarm system and its associated infrastructure to support the PFP facility mission through the remaining facility lifetime. The Review Plan was modeled upon Criteria and Review Approach Documents (CRAD) developed for DNFSB Recommendation 2000-2 reviews conducted across the Hanford Site. Concerns regarding component degradation and failure, increasing numbers of occurrence reports associated with the alarm system, and reliability issues were addressed. Additionally, RL performed a review of the engineering aspects of the CAS including the functions of design authorities and aspects of systems engineering. However, the focus of the assessment was on operations, maintenance, and reliability of the CAS, associated procurement practices, adequacy of safety and engineering policies and procedures, safety documentation, and fundamental engineering practices including training, qualification, and systems engineering. This assessment revealed that the PFP CAS and its associated infrastructure, administrative procedures, and conduct of operations are generally effective. There are no imminent criticality safety issues associated with the operation of the existing CAS. The Assessment Team believes that the CAS, as it presently exists at the PFP facility, is adequate to support the remaining mission lifetime of the facility while continuing to ensure personnel safety. This conclusion is dependent upon a continued level of funding adequate to support the required maintenance and occasional system upgrade. Two findings were identified during this assessment. Additionally, the report identified eight observations and two recommendations. The assessment revealed that recent changes to OSR compliance procedures and other documents do not contain the signature of the CSR as required by procedure. Lack of appropriate approval signatures is a noncompliance with site-level procedures.

NIRIDER, L.T.

2002-10-01T23:59:59.000Z

480

Operation o Solar Photovoltaic-Thermal (PVT) Hybrid System in KIER  

E-Print Network [OSTI]

The details of the Photovoltaic Thermal (PVT) hybrid air heating system, UTC air heating system and its effect on the performance of photovoltaic (PV) module and room temperature in KIER are explained in this paper. Two identical test rooms were...

Naveed, A.T.; Lee, E. J.; Kang, E. C.

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "independent system operator" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Optimization of Fuel Cell System Operating Conditions for Fuel Cell Vehicles  

E-Print Network [OSTI]

An Indirect Methanol Pem Fuel Cell System, SAE 2001, (paperof automotive PEM fuel cell stacks, SAE 2000 (paper number1009). for an automotive PEM fuel cell system with imbedded

Zhao, Hengbing; Burke, Andy

2008-01-01T23:59:59.000Z

482

FINITE ELEMENT MODEL OF MICROELECTROMECHANICAL SYSTEMS SWITCH OPERATING AT MICROWAVE FREQUENCIES  

E-Print Network [OSTI]

Professor Qiao Lin Department of Mechanical Engineering, Columbia University Microelectromechanical systems's Electrical Engineering Department from 1998 to 2000, where he pursued research in microelectromechanical systems (MEMS) and investigated silicon-micromachined fluidic and thermal devices. From 2000 to 2005, he

De Flaviis, Franco