National Library of Energy BETA

Sample records for incremental production capacity

  1. AN OPEN-CIRCUIT-VOLTAGE MODEL OF LITHIUM-ION BATTERIES FOR EFFECTIVE INCREMENTAL CAPACITY ANALYSIS

    E-Print Network [OSTI]

    Peng, Huei

    AN OPEN-CIRCUIT-VOLTAGE MODEL OF LITHIUM-ION BATTERIES FOR EFFECTIVE INCREMENTAL CAPACITY ANALYSIS electrochemical properties and aging status. INTRODUCTION With the widespread use of lithium-ion batteries the com- plex battery physical behavior during the lithium-ion intercalac- tion/deintercalation process

  2. On-board state of health monitoring of lithium-ion batteries using incremental capacity analysis with support vector regressionq

    E-Print Network [OSTI]

    Peng, Huei

    On-board state of health monitoring of lithium-ion batteries using incremental capacity analysis 2013 Accepted 5 February 2013 Available online 11 February 2013 Keywords: Electric vehicles Lithium-ion and life cycle. In this paper, we focus on the identification of Li-ion battery capacity fading

  3. Florida products pipeline set to double capacity

    SciTech Connect (OSTI)

    True, W.R.

    1995-11-13

    Directional drilling has begun this fall for a $68.5 million, approximately 110,000 b/d expansion of Central Florida Pipeline Co.`s refined products line from Tampa to Orlando. The drilling started in August and is scheduled to conclude this month, crossing under seven water bodies in Hillsborough, Polk, and Osceola counties. The current 6 and 10-in. system provides more than 90% of the petroleum products used in Central Florida, according to Central Florida Pipeline. Its additional capacity will meet the growing region`s demand for gasoline, diesel, and jet fuel. The new pipeline, along with the existing 10-in. system, will increase total annual capacity from 30 million bbl (82,192 b/d) to approximately 70 million bbl (191,781 b/d). The older 6-in. line will be shutdown when the new line is operating fully. The steps of pipeline installation are described.

  4. Multi-Period Production Capacity Planning for Integrated Product and Production System Design*

    E-Print Network [OSTI]

    Saitou, Kazuhiro "Kazu"

    Multi-Period Production Capacity Planning for Integrated Product and Production System Design* Emre.ac.uk kazu@umich.edu .Abstract ­ This paper presents a simulation-based method to aid multi-period production capacity planning by quantifying the trade-off between product quality and production cost. The product

  5. Renewable Motor Fuel Production Capacity Under H.R.4

    Reports and Publications (EIA)

    2002-01-01

    This paper analyzes renewable motor fuel production capacity with the assumption that ethanol will be used to meet the renewable fuels standard.

  6. Saudi production capacity climbing to 10 million b/d

    SciTech Connect (OSTI)

    Not Available

    1994-07-11

    Saudi Arabia this year is completing its expansion of production capacity and developing recent discoveries to enhance export flexibility. The 3 million b/d capacity expansion to 10 million b/d, announced in 1989, is on target for completion by year end 1994. Most of the effort involves restoration of mothballed production equipment and installation of several gas-oil separation plants (GOSPs) in existing fields. But Saudi Arabian Oil Co. (Saudi Aramco) also this year will start up production of extra-light oil from a new field in the central part of the kingdom. Start-up of Hawtah area production demonstrates success of an oil search Aramco began after receiving exclusive exploration rights to nearly all of Saudi Arabia's prospective area in 1986. From new fields and traditional producing areas, therefore, Saudi Arabia has the potential to expand production capacity beyond 10 million b/d. The paper describes the development of the extra capacity.

  7. Shannon Capacity and Ramsey Numbers from Product of Graphs

    E-Print Network [OSTI]

    Radziszowski, Stanislaw P.

    Bounds on Shannon Capacity and Ramsey Numbers from Product of Graphs Xiaodong Xu Guangxi Academy Abstract In this paper we study Shannon capacity of channels in the context of classical Ramsey numbers. We by Abbott and Song and thus establish new lower bounds for a special type of multicolor Ramsey numbers. We

  8. Initial Production Capacity Investments for Commercializing Pharmaceutical Products

    E-Print Network [OSTI]

    Yuen, Ming Kwan

    2012-01-01

    Hanan. 1982. Operations research and capacity expansionEngi- neering and Operations Research Department forstochastic demands. Operations Research 40 pp. S210–S216.

  9. NPR (New Production Reactor) capacity cost evaluation

    SciTech Connect (OSTI)

    1988-07-01

    The ORNL Cost Evaluation Technical Support Group (CETSG) has been assigned by DOE-HQ Defense Programs (DP) the task defining, obtaining, and evaluating the capital and life-cycle costs for each of the technology/proponent/site/revenue possibilities envisioned for the New Production Reactor (NPR). The first part of this exercise is largely one of accounting, since all NPR proponents use different accounting methodologies in preparing their costs. In order to address this problem of comparing ''apples and oranges,'' the proponent-provided costs must be partitioned into a framework suitable for all proponents and concepts. If this is done, major cost categories can then be compared between concepts and major cost differences identified. Since the technologies proposed for the NPR and its needed fuel and target support facilities vary considerably in level of technical and operational maturity, considerable care must be taken to evaluate the proponent-derived costs in an equitable manner. The use of cost-risk analysis along with derivation of single point or deterministic estimates allows one to take into account these very real differences in technical and operational maturity. Chapter 2 summarizes the results of this study in tabular and bar graph form. The remaining chapters discuss each generic reactor type as follows: Chapter 3, LWR concepts (SWR and WNP-1); Chapter 4, HWR concepts; Chapter 5, HTGR concept; and Chapter 6, LMR concept. Each of these chapters could be a stand-alone report. 39 refs., 36 figs., 115 tabs.

  10. Analyzing Characteristics of Incremental Lifecycle by using

    E-Print Network [OSTI]

    Bae, Doo-Hwan

    of incremental life cycle Set relationship between process and project environment Build and calibrate simulation Productivity Development process Hybrid simulation #12;2006-10-02 7/18 Related work(1/3) Spiral life cycle of increments -Arrive time -Amount Input Simulation model for incremental life cycle Capture character

  11. MULTI-PERIOD CAPACITY PLANNING FOR INTEGRATED PRODUCT-PROCESS DESIGN

    E-Print Network [OSTI]

    Saitou, Kazuhiro "Kazu"

    MULTI-PERIOD CAPACITY PLANNING FOR INTEGRATED PRODUCT-PROCESS DESIGN Emre Kazancioglu Department-process design, robust design, capacity plan- ning, discrete event simulation, Monte Carlo simula- tion, multi increas- ing product quality by investing on higher quality machinery drives the price of the product up

  12. Thoughts on Productivity, Efficiency and Capacity Utilization Measurement for Fisheries

    E-Print Network [OSTI]

    Morrison Paul, Catherine J.

    2000-01-01

    Application to Productivity Measurement in the US Automobilemodeling and measurement of productivity and CU, to provide2000], “Productivity and Efficiency Measurement for our ‘New

  13. Natural gas productive capacity for the lower 48 States, 1980 through 1995

    SciTech Connect (OSTI)

    Not Available

    1994-07-14

    The purpose of this report is to analyze monthly natural gas wellhead productive capacity in the lower 48 States from 1980 through 1992 and project this capacity from 1993 through 1995. For decades, natural gas supplies and productive capacity have been adequate to meet demand. In the 1970`s the capacity surplus was small because of market structure (split between interstate and intrastate), increasing demand, and insufficient drilling. In the early 1980`s, lower demand, together with increased drilling, led to a large surplus capacity as new productive capacity came on line. After 1986, this large surplus began to decline as demand for gas increased, gas prices fell, and gas well completions dropped sharply. In late December 1989, the decline in this surplus, accompanied by exceptionally high demand and temporary weather-related production losses, led to concerns about the adequacy of monthly productive capacity for natural gas. These concerns should have been moderated by the gas system`s performance during the unusually severe winter weather in March 1993 and January 1994. The declining trend in wellhead productive capacity is expected to be reversed in 1994 if natural gas prices and drilling meet or exceed the base case assumption. This study indicates that in the low, base, and high drilling cases, monthly productive capacity should be able to meet normal production demands through 1995 in the lower 48 States (Figure ES1). Exceptionally high peak-day or peak-week production demand might not be met because of physical limitations such as pipeline capacity. Beyond 1995, as the capacity of currently producing wells declines, a sufficient number of wells and/or imports must be added each year in order to ensure an adequate gas supply.

  14. COMPOSITES AND MANUFACTURED PRODUCTS SCREW-HOLDING CAPACITY OF

    E-Print Network [OSTI]

    , and ness, bending stiffness and strength), wood species (pine vs. sweetgum) had an millworkmarkets nificantly alter the screw-holding capac- els were cut for bending modulus of elas- (screw or nail for the study. This paper (No. 98-22-0213) is published with the approval of the 2AmericanSociety for Testing

  15. Improving Power System Modeling. A Tool to Link Capacity Expansion and Production Cost Models

    SciTech Connect (OSTI)

    Diakov, Victor; Cole, Wesley; Sullivan, Patrick; Brinkman, Gregory; Margolis, Robert

    2015-11-01

    Capacity expansion models (CEM) provide a high-level long-term view at the prospects of the evolving power system. In simulating the possibilities of long-term capacity expansion, it is important to maintain the viability of power system operation in the short-term (daily, hourly and sub-hourly) scales. Production-cost models (PCM) simulate routine power system operation on these shorter time scales using detailed load, transmission and generation fleet data by minimizing production costs and following reliability requirements. When based on CEM 'predictions' about generating unit retirements and buildup, PCM provide more detailed simulation for the short-term system operation and, consequently, may confirm the validity of capacity expansion predictions. Further, production cost model simulations of a system that is based on capacity expansion model solution are 'evolutionary' sound: the generator mix is the result of logical sequence of unit retirement and buildup resulting from policy and incentives. The above has motivated us to bridge CEM with PCM by building a capacity expansion - to - production cost model Linking Tool (CEPCoLT). The Linking Tool is built to onset capacity expansion model prescriptions onto production cost model inputs. NREL's ReEDS and Energy Examplar's PLEXOS are the capacity expansion and the production cost models, respectively. Via the Linking Tool, PLEXOS provides details of operation for the regionally-defined ReEDS scenarios.

  16. A review of Oil production capacity expansion costs for the Persian Gulf

    E-Print Network [OSTI]

    Adelman, Morris Albert

    1996-01-01

    The U.S. Energy Information Agency has recently published a report prepared by Petroconsultants, Inc. that addresses the cost of expanding crude oil production capacity in the Persian Gulf. A study on this subject is much ...

  17. Enhancing biomass production and yield by maintaining enhanced capacity for CO2 uptake in response to

    E-Print Network [OSTI]

    Barron, John

    Enhancing biomass production and yield by maintaining enhanced capacity for CO2 uptake in response, W., Barron, J., Sarhan, F., Hu¨ ner, N., Grodzinski, B. and Micallef, B. J. 2014. Enhancing biomass, B. J. 2014. Accroissement de la production et du rendement de la biomasse par le maintien d

  18. Multiple-part-type systems in high volume manufacturing : long-term capacity planning & time-based production control

    E-Print Network [OSTI]

    Hua, Xia, M. Eng. Massachusetts Institute of Technology

    2008-01-01

    This project examines a production station that faces fluctuating demand with seasonal pattern. The cumulative capacity exceeds the cumulative demand in a one year period; however, its weekly capacity is not able to meet ...

  19. Waste treatment capacity of raft hydroponic lettuce production in an integrated fish culture system and the contribution of lettuce to treatment capacity 

    E-Print Network [OSTI]

    Gloger, Kelly C

    1995-01-01

    Two experiments were conducted to determine: 1.) the waste treatment capacity of raft hydroponic lettuce production in an integrated fish culture system and 2.) the contribution of lettuce plants, Lactuca saliva, cv. Paris ...

  20. Natural gas productive capacity for the lower 48 states 1984 through 1996, February 1996

    SciTech Connect (OSTI)

    1996-02-09

    This is the fourth wellhead productive capacity report. The three previous ones were published in 1991, 1993, and 1994. This report should be of particular interest to those in Congress, Federal and State agencies, industry, and the academic community, who are concerned with the future availability of natural gas. The EIA Dallas Field Office has prepared five earlier reports regarding natural gas productive capacity. These reports, Gas Deliverability and Flow Capacity of Surveillance Fields, reported deliverability and capacity data for selected gas fields in major gas producing areas. The data in the reports were based on gas-well back-pressure tests and estimates of gas-in-place for each field or reservoir. These reports use proven well testing theory, most of which has been employed by industry since 1936 when the Bureau of Mines first published Monograph 7. Demand for natural gas in the United States is met by a combination of natural gas production, underground gas storage, imported gas, and supplemental gaseous fuels. Natural gas production requirements in the lower 48 States have been increasing during the last few years while drilling has remained at low levels. This has raised some concern about the adequacy of future gas supplies, especially in periods of peak heating or cooling demand. The purpose of this report is to address these concerns by presenting a 3-year projection of the total productive capacity of natural gas at the wellhead for the lower 48 States. Alaska is excluded because Alaskan gas does not enter the lower-48 States pipeline system. The Energy Information Administration (EIA) generates this 3-year projection based on historical gas-well drilling and production data from State, Federal, and private sources. In addition to conventional gas-well gas, coalbed gas and oil-well gas are also included.

  1. Using heat demand prediction to optimise Virtual Power Plant production capacity

    E-Print Network [OSTI]

    Hurink, Johann

    1 Using heat demand prediction to optimise Virtual Power Plant production capacity Vincent Bakker that generate electricity (and heat) at the kilowatt level, which allows them to be installed in households distributed electricity generation (micro-generation e.g. solar cells, micro Combined Heat and Power (micro

  2. Capturing Value in a Global Innovation Network: A Comparison of Radical and Incremental Innovation

    E-Print Network [OSTI]

    Dedrick, Jason; Kraemer, Kenneth L; Linden, Greg

    2007-01-01

    innovation Radical product innovation (Utterback, 1990) hasredefine a product category Incremental innovation - EarlyRadical innovation Opportunity - New product category - New

  3. Alternative Fuel Infrastructure Expansion: Costs, Resources, Production Capacity, and Retail Availability for Low-Carbon Scenarios

    Broader source: Energy.gov [DOE]

    The petroleum-based transportation fuel system is complex and highly developed, in contrast to the nascent low-petroleum, low-carbon alternative fuel system. This report examines how expansion of the low-carbon transportation fuel infrastructure could contribute to deep reductions in petroleum use and greenhouse gas (GHG) emissions across the U.S. transportation sector. Three low-carbon scenarios, each using a different combination of low-carbon fuels, were developed to explore infrastructure expansion trends consistent with a study goal of reducing transportation sector GHG emissions to 80% less than 2005 levels by 2050.These scenarios were compared to a business-as-usual (BAU) scenario and were evaluated with respect to four criteria: fuel cost estimates, resource availability, fuel production capacity expansion, and retail infrastructure expansion.

  4. Draft environmental impact statement for the siting, construction, and operation of New Production Reactor capacity. Volume 1, Summary

    SciTech Connect (OSTI)

    Not Available

    1991-04-01

    This Environmental Impact Statement (EIS) assesses the potential environmental impacts, both on a broad programmatic level and on a project-specific level, concerning a proposed action to provide new tritium production capacity to meet the nation`s nuclear defense requirements well into the 21st century. A capacity equivalent to that of about a 3,000-megawatt (thermal) heavy-water reactor was assumed as a reference basis for analysis in this EIS; this is the approximate capacity of the existing production reactors at DOE`s Savannah River Site near Aiken, South Carolina. The EIS programmatic alternatives address Departmental decisions to be made on whether to build new production facilities, whether to build one or more complexes, what size production capacity to provide, and when to provide this capacity. Project-specific impacts for siting, constructing, and operating new production reactor capacity are assessed for three alternative sites: the Hanford Site near Richland, Washington; the Idaho National Engineering Laboratory near Idaho Falls, Idaho; and the Savannah River Site. For each site, the impacts of three reactor technologies (and supporting facilities) are assessed: a heavy-water reactor, a light-water reactor, and a modular high-temperature gas-cooled reactor. Impacts of the no-action alternative also are assessed. The EIS evaluates impacts related to air quality; noise levels; surface water, groundwater, and wetlands; land use; recreation; visual environment; biotic resources; historical, archaeological, and cultural resources; socioeconomics; transportation; waste management; and human health and safety. The EIS describes in detail the potential radioactive releases from new production reactors and support facilities and assesses the potential doses to workers and the general public.

  5. Draft environmental impact statement siting, construction, and operation of New Production Reactor capacity. Volume 4, Appendices D-R

    SciTech Connect (OSTI)

    1991-04-01

    This Environmental Impact Statement (EIS) assesses the potential environmental impacts, both on a broad programmatic level and on a project-specific level, concerning a proposed action to provide new tritium production capacity to meet the nation`s nuclear defense requirements well into the 21st century. A capacity equivalent to that of about a 3,000-megawatt (thermal) heavy-water reactor was assumed as a reference basis for analysis in this EIS; this is the approximate capacity of the existing production reactors at DOE`s Savannah River Site near Aiken, South Carolina. The EIS programmatic alternatives address Departmental decisions to be made on whether to build new production facilities, whether to build one or more complexes, what size production capacity to provide, and when to provide this capacity. Project-specific impacts for siting, constructing, and operating new production reactor capacity are assessed for three alternative sites: the Hanford Site near Richland, Washington; the Idaho National Engineering Laboratory near Idaho Falls, Idaho; and the Savannah River Site. For each site, the impacts of three reactor technologies (and supporting facilities) are assessed: a heavy-water reactor, a light-water reactor, and a modular high-temperature gas-cooled reactor. Impacts of the no-action alternative also are assessed. The EIS evaluates impacts related to air quality; noise levels; surface water, groundwater, and wetlands; land use; recreation; visual environment; biotic resources; historical, archaeological, and cultural resources; socioeconomics; transportation; waste management; and human health and safety. The EIS describes in detail the potential radioactive releases from new production reactors and support facilities and assesses the potential doses to workers and the general public. This volume contains 15 appendices.

  6. Capacity analysis, cycle time optimization, and supply chain strategy in multi-product biopharmaceutical manufacturing operations

    E-Print Network [OSTI]

    Fetcho-Phillips, Kacey L. (Kacey Lynn)

    2011-01-01

    Application of system optimization theory, supply chain principles, and capacity modeling are increasingly valuable tools for use in pharmaceutical manufacturing facilities. The dynamics of the pharmaceutical industry - ...

  7. Automatic Incremental Routing Using Multiple Roots

    E-Print Network [OSTI]

    Ghosh, Rumi; Garcia-Luna-Aceves, J.J.

    2013-01-01

    J. J. Garcia-Luna-Aceves, “Automatic Routing Using MultipleAutomatic Incremental Routing Using Multiple Roots RumiWe present Multi-root Automatic Incremental Rout- ing (

  8. PLAY ANALYSIS AND DIGITAL PORTFOLIO OF MAJOR OIL RESERVOIRS IN THE PERMIAN BASIN: APPLICATION AND TRANSFER OF ADVANCED GEOLOGICAL AND ENGINEERING TECHNOLOGIES FOR INCREMENTAL PRODUCTION OPPORTUNITIES

    SciTech Connect (OSTI)

    Shirley P. Dutton; Eugene M. Kim; Ronald F. Broadhead; Caroline L. Breton; William D. Raatz; Stephen C. Ruppel; Charles Kerans

    2004-05-01

    The Permian Basin of west Texas and southeast New Mexico has produced >30 Bbbl (4.77 x 10{sup 9} m{sup 3}) of oil through 2000, most of it from 1,339 reservoirs having individual cumulative production >1 MMbbl (1.59 x 10{sup 5} m{sup 3}). These significant-sized reservoirs are the focus of this report. Thirty-two Permian Basin oil plays were defined, and each of the 1,339 significant-sized reservoirs was assigned to a play. The reservoirs were mapped and compiled in a Geographic Information System (GIS) by play. Associated reservoir information within linked data tables includes Railroad Commission of Texas reservoir number and district (Texas only), official field and reservoir name, year reservoir was discovered, depth to top of the reservoir, production in 2000, and cumulative production through 2000. Some tables also list subplays. Play boundaries were drawn for each play; the boundaries include areas where fields in that play occur but are <1 MMbbl (1.59 x 10{sup 5} m{sup 3}) of cumulative production. This report contains a summary description of each play, including key reservoir characteristics and successful reservoir-management practices that have been used in the play. The CD accompanying the report contains a pdf version of the report, the GIS project, pdf maps of all plays, and digital data files. Oil production from the reservoirs in the Permian Basin having cumulative production >1 MMbbl (1.59 x 10{sup 5} m{sup 3}) was 301.4 MMbbl (4.79 x 10{sup 7} m{sup 3}) in 2000. Cumulative Permian Basin production through 2000 from these significant-sized reservoirs was 28.9 Bbbl (4.59 x 10{sup 9} m{sup 3}). The top four plays in cumulative production are the Northwest Shelf San Andres Platform Carbonate play (3.97 Bbbl [6.31 x 10{sup 8} m{sup 3}]), the Leonard Restricted Platform Carbonate play (3.30 Bbbl 5.25 x 10{sup 8} m{sup 3}), the Pennsylvanian and Lower Permian Horseshoe Atoll Carbonate play (2.70 Bbbl [4.29 x 10{sup 8} m{sup 3}]), and the San Andres Platform Carbonate play (2.15 Bbbl [3.42 x 10{sup 8} m{sup 3}]).

  9. Incrementally Deployable Source Address Validity

    E-Print Network [OSTI]

    Lowd, Daniel

    ID-SAVE: Incrementally Deployable Source Address Validity Enforcement Toby Ehrenkranz ://netsec.cs.uoregon.edu #12;Ehrenkranz WiP ID-SAVE What's The Problem? While routers know which direction a packet should are unreliable ID-SAVE attacks this root cause! 1 #12;Ehrenkranz WiP ID-SAVE ID-SAVE Basics Create and maintain

  10. Incremental Mechanism Design Vincent Conitzer

    E-Print Network [OSTI]

    Incremental Mechanism Design Vincent Conitzer Duke University Department of Computer Science@cs.cmu.edu Abstract Mechanism design has traditionally focused almost exclusively on the design of truthful mechanisms bounded agents may not be able to find the best manipulation, and 3. when designing mechanisms

  11. PLAY ANALYSIS AND DIGITAL PORTFOLIO OF MAJOR OIL RESERVOIRS IN THE PERMIAN BASIN: APPLICATION AND TRANSFER OF ADVANCED GEOLOGICAL AND ENGINEERING TECHNOLOGIES FOR INCREMENTAL PRODUCTION OPPORTUNITIES

    SciTech Connect (OSTI)

    Shirley P. Dutton; Eugene M. Kim; Ronald F. Broadhead; William Raatz; Cari Breton; Stephen C. Ruppel; Charles Kerans; Mark H. Holtz

    2003-04-01

    A play portfolio is being constructed for the Permian Basin in west Texas and southeast New Mexico, the largest petroleum-producing basin in the US. Approximately 1300 reservoirs in the Permian Basin have been identified as having cumulative production greater than 1 MMbbl of oil through 2000. Of these major reservoirs, approximately 1,000 are in Texas and 300 in New Mexico. On a preliminary basis, 32 geologic plays have been defined for Permian Basin oil reservoirs and assignment of each of the 1300 major reservoirs to a play has begun. The reservoirs are being mapped and compiled in a Geographic Information System (GIS) by play. Detailed studies of three reservoirs are in progress: Kelly-Snyder (SACROC unit) in the Pennsylvanian and Lower Permian Horseshoe Atoll Carbonate play, Fullerton in the Leonardian Restricted Platform Carbonate play, and Barnhart (Ellenburger) in the Ellenburger Selectively Dolomitized Ramp Carbonate play. For each of these detailed reservoir studies, technologies for further, economically viable exploitation are being investigated.

  12. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    refinery as of January 1, 2006 Tables 1 Number and Capacity of Operable Petroleum Refineries by PAD District and State as of January 1, 2006 PDF 2 Production Capacity of...

  13. On Production and Subcontracting Strategies for Manufacturers with Limited Capacity and Backlog-Dependent Demand

    E-Print Network [OSTI]

    Tan, Barli

    We study a manufacturing firm that builds a product to stock to meet a random demand. If there is a positive surplus of finished goods, the customers make their purchases without delay and leave. If there is a backlog, the ...

  14. Shannon Capacity Ramsey Numbers

    E-Print Network [OSTI]

    Radziszowski, Stanislaw P.

    Shannon Capacity Ramsey Numbers Old links between Shannon and Ramsey New links between Shannon and Ramsey Bounds on Shannon Capacity and Ramsey Numbers from Product of Graphs Xiaodong Xu1 Stanislaw Institute of Technology, NY, USA March 2014 1/24 #12;Shannon Capacity Ramsey Numbers Old links between

  15. ADAPTON: Composable, Demand-Driven Incremental Computation

    E-Print Network [OSTI]

    Hicks, Michael

    ADAPTON: Composable, Demand- Driven Incremental Computation Abstract Many researchers have proposed important drawbacks. First, recomputation is oblivious to specific demands on the program output; that is ic , a core calculus that applies a demand-driven semantics to incremental computa- tion, tracking

  16. INCREMENTAL HORIZONTAL FRAGMENTATION OF DATABASE CLASS OBJECTS

    E-Print Network [OSTI]

    Ezeife, Christie

    INCREMENTAL HORIZONTAL FRAGMENTATION OF DATABASE CLASS OBJECTS C.I. Ezeife School of Computer-orientd databases, Incremental horizontal fragmentation, Distribution Abstract: Horizontal fragments of a class in an object-oriented database system contain subsets of the class extent or instance objects. These fragments

  17. Draft environmental impact statement for the siting, construction, and operation of New Production Reactor capacity. Volume 2, Sections 1-6

    SciTech Connect (OSTI)

    Not Available

    1991-04-01

    This (EIS) assesses the potential environmental impacts, both on a broad programmatic level and on a project-specific level, concerning a proposed action to provide new tritium production capacity to meet the nation`s nuclear defense requirements well into the 21st century. A capacity equivalent to that of about a 3,000-megawatt (thermal) heavy-water reactor was assumed as a reference basis for analysis in this EIS; this is the approximate capacity of the existing production reactors at DOE`s Savannah River Site. The EIS programmatic alternatives address Departmental decisions to be made on whether to build new production facilities, whether to build one or more complexes, what size production capacity to provide, and when to provide this capacity. Project-specific impacts for siting, constructing, and operating new production reactor capacity are assessed for three alternative sites: the Hanford Site near Richland, Washington; the Idaho National Engineering Laboratory near Idaho Falls, Idaho; and the Savannah River Site. For each site, the impacts of three reactor technologies (and supporting facilities) are assessed: a heavy-water reactor, a light-water reactor, and a modular high-temperature gas-cooled reactor. Impacts of the no-action alternative also are assessed. The EIS evaluates impacts related to air quality; noise levels; surface water, groundwater, and wetlands; land use; recreation; visual environment; biotic resources; historical, archaeological, and cultural resources; socioeconomics; transportation; waste management; and human health and safety. The EIS describes in detail the potential radioactive releases from new production reactors and support facilities and assesses the potential doses to workers and the general public. This volume contains the analysis of programmatic alternatives, project alternatives, affected environment of alternative sites, environmental consequences, and environmental regulations and permit requirements.

  18. Draft environmental impact statement for the siting, construction, and operation of New Production Reactor capacity. Volume 3, Sections 7-12, Appendices A-C

    SciTech Connect (OSTI)

    Not Available

    1991-04-01

    This Environmental Impact Statement (EIS) assesses the potential environmental impacts, both on a broad programmatic level and on a project-specific level, concerning a proposed action to provide new tritium production capacity to meet the nation`s nuclear defense requirements well into the 21st century. A capacity equivalent to that of about a 3,000-megawatt (thermal) heavy-water reactor was assumed as a reference basis for analysis in this EIS; this is the approximate capacity of the existing production reactors at DOE`s Savannah River Site near Aiken, South Carolina. The EIS programmatic alternatives address Departmental decisions to be made on whether to build new production facilities, whether to build one or more complexes, what size production capacity to provide, and when to provide this capacity. Project-specific impacts for siting, constructing, and operating new production reactor capacity are assessed for three alternative sites: the Hanford Site near Richland, Washington; the Idaho National Engineering Laboratory near Idaho Falls, Idaho; and the Savannah River Site. For each site, the impacts of three reactor technologies (and supporting facilities) are assessed: a heavy-water reactor, a light-water reactor, and a modular high-temperature gas-cooled reactor. Impacts of the no-action alternative also are assessed. The EIS evaluates impacts related to air quality; noise levels; surface water, groundwater, and wetlands; land use; recreation; visual environment; biotic resources; historical, archaeological, and cultural resources; socioeconomics; transportation; waste management; and human health and safety. The EIS describes in detail the potential radioactive releases from new production reactors and support facilities and assesses the potential doses to workers and the general public. This volume contains references; a list of preparers and recipients; acronyms, abbreviations, and units of measure; a glossary; an index and three appendices.

  19. SINA: Scalable Incremental Processing of Continuous Queries in Spatiotemporal Databases

    E-Print Network [OSTI]

    Kaiserslautern, Universität

    SINA: Scalable Incremental Processing of Continuous Queries in Spatiotemporal Databases Mohamed F F. Mokbel, Xiaopeng Xiong, Walid G. Aref ()SINA: Scalable Incremental Processing of Continuous, Xiaopeng Xiong, Walid G. Aref ()SINA: Scalable Incremental Processing of Continuous Queries

  20. EIS-0144: Siting, Construction, and Operation of New Production Reactor Capacity; Hanford Site, Idaho National Engineering Laboratory, and Savannah River Site

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy developed this statement to assess the potential environmental impacts, both on a broad programmatic level and on a project-specific level, concerning a proposed action to provide new tritium production capacity to meet the nation's nuclear defense requirements well into the 21st century. This EIS was cancelled after the DEIS was issued.

  1. On Incremental Quantitative Verification for Probabilistic Systems

    E-Print Network [OSTI]

    Oxford, University of

    . Quantitative verification is an automated method to establish quantitative properties of a system model, non- probabilistic verification, which, in addition to exhaustive exploration of a system modelOn Incremental Quantitative Verification for Probabilistic Systems Marta Kwiatkowska, David Parker

  2. Exergy analysis of incremental sheet forming

    E-Print Network [OSTI]

    Dittrich, M. A.

    Research in the last 15 years has led to die-less incremental forming processes that are close to realization in an industrial setup. Whereas many studies have been carried out with the intention of investigating technical ...

  3. INCREMENTAL COOLING LOAD DETERMINATION FOR PASSIVE DIRECT GAIN HEATING SYSTEMS

    E-Print Network [OSTI]

    Sullivan, Paul W.

    2013-01-01

    May 27-30, 1981 INCREMENTAL COOLING LOAD DETERMINATION FOR12048 May 1981 INCREMENTAL COOLING LOAD DETERMINATION FORfor increases in the building cooling load resulting from

  4. Adapton: Composable, Demand-Driven Incremental Computation

    E-Print Network [OSTI]

    Hicks, Michael

    Adapton: Composable, Demand-Driven Incremental Computation CS-TR-5027 -- July 12, 2013 Matthew A demands on the program output; that is, if a program input changes, all depen- dencies will be recomputed. To address these problems, we present cdd ic , a core calculus that applies a demand-driven seman- tics

  5. INCREMENTAL LEARNING OF ULTRASONIC WELD INSPECTION SIGNALS

    E-Print Network [OSTI]

    Polikar, Robi

    the classification performance of the algorithm on ultrasonic signals obtained from nuclear submarine hulls], in tubings and pipings of nuclear power plants [2,3], in artificial heart valves, etc. Currently used ASC applications warrant incremental learning algorithms. For example, in nuclear power plants, data are collected

  6. The Mechanics of Incremental Sheet Forming

    E-Print Network [OSTI]

    Cambridge, University of

    The Mechanics of Incremental Sheet Forming Kathryn Jackson Pembroke College February 2008, the deformation mechanics is not fully understood. This thesis presents new insights into the mechanics of ISF forces measured in ISF. The mechanics of ISF of sheet metals is researched. Through-thickness deformation

  7. Incremental Power Grid Verification ECE Department

    E-Print Network [OSTI]

    Najm, Farid N.

    Incremental Power Grid Verification Abhishek ECE Department University of Toronto Toronto, Ontario, Canada f.najm@utoronto.ca ABSTRACT Verification of the on-die power grid is a key step in the design General Terms Performance, Algorithms, Verification Keywords Power Grid, voltage drop 1. INTRODUCTION

  8. Improving inventory and production control in an electronic company : capacity planning, base stock policy, and Kanban system

    E-Print Network [OSTI]

    Dong, Youqun, M. Eng. Massachusetts Institute of Technology.

    2009-01-01

    This research developed improved methods of inventory and production control in an electronic manufacturing company, which faces fluctuating seasonal demands and is categorized as a multiple part type production system ...

  9. Original article Root biomass and biomass increment in a beech

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Original article Root biomass and biomass increment in a beech (Fagus sylvatica L.) stand in North ­ This study is part of a larger project aimed at quantifying the biomass and biomass increment been developed to estimate the biomass and biomass increment of coarse, small and fine roots of trees

  10. Transportation Energy Futures Series: Alternative Fuel Infrastructure Expansion: Costs, Resources, Production Capacity, and Retail Availability for Low-Carbon Scenarios

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With U.S.WeekProducts > ProductsSubtitleTransportationFUELS

  11. for estimates of root production and the ca-pacity of soils to store carbon. If most root

    E-Print Network [OSTI]

    von der Linde, D.

    1345 for estimates of root production and the ca- pacity of soils to store carbon. If most root of soil respiration and leaf litterfall (8). This carbon supports all root functions, not just growth not really un- derstand the pathways this carbon takes; some may be retained in soils for many years through

  12. Multi-Site Capacity, Production and Distribution Planning with Reactor Modifications: MILP Model, Bi-level Decomposition

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    The Dow Chemical Company, Midland, MI 48674 April, 2010 Abstract In this paper we propose a multiperiod producing one product family to producing another one. To solve the resulting large-scale MILP model, we times and smaller optimality gaps for the problem addressed in this work. Key words: planning

  13. Transportation Energy Futures Series: Alternative Fuel Infrastructure Expansion: Costs, Resources, Production Capacity, and Retail Availability for Low-Carbon Scenarios

    SciTech Connect (OSTI)

    Melaina, M. W.; Heath, G.; Sandor, D.; Steward, D.; Vimmerstedt, L.; Warner, E.; Webster, K. W.

    2013-04-01

    Achieving the Department of Energy target of an 80% reduction in greenhouse gas emissions by 2050 depends on transportation-related strategies combining technology innovation, market adoption, and changes in consumer behavior. This study examines expanding low-carbon transportation fuel infrastructure to achieve deep GHG emissions reductions, with an emphasis on fuel production facilities and retail components serving light-duty vehicles. Three distinct low-carbon fuel supply scenarios are examined: Portfolio: Successful deployment of a range of advanced vehicle and fuel technologies; Combustion: Market dominance by hybridized internal combustion engine vehicles fueled by advanced biofuels and natural gas; Electrification: Market dominance by electric drive vehicles in the LDV sector, including battery electric, plug-in hybrid, and fuel cell vehicles, that are fueled by low-carbon electricity and hydrogen. A range of possible low-carbon fuel demand outcomes are explored in terms of the scale and scope of infrastructure expansion requirements and evaluated based on fuel costs, energy resource utilization, fuel production infrastructure expansion, and retail infrastructure expansion for LDVs. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored transportation-related strategies for abating GHGs and reducing petroleum dependence.

  14. Capacity Markets for Electricity

    E-Print Network [OSTI]

    Creti, Anna; Fabra, Natalia

    2004-01-01

    and design of electricity capacity markets. Our work has twoMarkets for Electricity capacity markets, and so, when thesemain features of electricity capacity markets. We have used

  15. Toward a Model for Incremental Grounding in Spoken Dialogue Systems

    E-Print Network [OSTI]

    Theune, Mariët

    natural conversation between humans and computers. By analyzing the user's utterance while it is still at examples of incremental grounding behavior in spoken conversa- tions between human interlocutors implementation within a working spoken dialogue system. 2 Incremental Grounding Behavior in Human Dialogue

  16. Mining Transliterations from Web Query Results: An Incremental Approach

    E-Print Network [OSTI]

    We study an adaptive learning framework for phonetic similarity modeling (PSM) that supports strategy for the framework based on Bayesian theory for PSM adaptation. The idea of incremental learning reality. In this way, the learning process refines the PSM incrementally while constructing

  17. Utility maximization in models with conditionally independent increments

    E-Print Network [OSTI]

    Kallsen, Jan

    Utility maximization in models with conditionally independent increments Jan Kallsen Johannes Muhle-Karbe Abstract We consider the problem of maximizing expected utility from terminal wealth in models for power utility under the assumption that the increments of the asset price are independent conditionally

  18. Incremental Clicks Impact Of Mobile Search Advertising Shaun Lysen

    E-Print Network [OSTI]

    Cortes, Corinna

    Incremental Clicks Impact Of Mobile Search Advertising Shaun Lysen Google Inc. Abstract In this research, we examine how the number of mobile organic clicks changes when advertisers significantly change to mobile search advertising. A metastudy of 327 advertisers re- veals that 88% of ad clicks are incremental

  19. INCREMENTAL COOLING LOAD DETERMINATION FOR PASSIVE DIRECT GAIN HEATING SYSTEMS

    E-Print Network [OSTI]

    Sullivan, Paul W.

    2013-01-01

    an increment of 1 ft to a passive building in each of the 25Passive and Hybrid Division, of the Office of Solar Applica- tions for Buildings,building thermal dynamics including features of particular interest, such as passive

  20. Is emotional intelligence worthwhile?: Assessing incremental validity and adverse impact 

    E-Print Network [OSTI]

    Rhodes, Dana Lanay

    2009-05-15

    several contributions: (a) a summary of theoretical links between EI and job performance, (b) meta-analytic incremental validity estimation for two different conceptualizations of emotional intelligence – labeled ability EI and mixed EI – over and above...

  1. Determination of age in forensic dentistry from cemental incremental lines 

    E-Print Network [OSTI]

    Sousa, Eliane Marques Duarte de

    1987-01-01

    ) John E. Martin (Member) H. Del Var Petersen (Member) Gerald R. Bratton (Head of Department) December lg87 ABSTNACT Determination of Age in Forensic Dentistry from Cemental Incremental Lines. (December 1987) Eliane Marques Duarte de Sousa, D. D...DETERMINATION OF AGE IN FORENSIC DENTISTRY FROM CEMENTAL INCREMENTAL LINES Thes' s by ELIANE MARJUES DLARTE DF SOUSA Submitted to the Graduate College of Texas A?M Univer ity ' n r. srt' al f"lf' llment of the requirements for the degree...

  2. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity Report

  3. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity Report5

  4. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity

  5. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity Operable

  6. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity

  7. Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker

    E-Print Network [OSTI]

    Khedker, Uday

    Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

  8. Incremental Testing of ObjectOriented Class Structures

    E-Print Network [OSTI]

    McGregor, John D.

    Incremental Testing of Object­Oriented Class Structures Mary Jean Harrold and John D. Mc­designed, thoroughly­tested classes that can be confidently reused for many applications, few class testing techniques have been devel­ oped. In this paper, we present a class testing technique that exploits

  9. Incremental Testing of Object-Oriented Class Structures

    E-Print Network [OSTI]

    McGregor, John D.

    Incremental Testing of Object-Oriented Class Structures Mary Jean Harrold and John D. Mc-designed, thoroughly-tested classes that can be confidently reused for many applications, few class testing techniques have been devel- oped. In this paper, we present a class testing technique that exploits

  10. Incremental Biomedical Ontology Change Management through Learning Agents

    E-Print Network [OSTI]

    Haarslev, Volker

    Incremental Biomedical Ontology Change Management through Learning Agents Arash Shaban change management methodologies is the over-reliance on human factors. Despite the advantages of human ontologies. This frame- work aims to assist and guide ontology engineers through the change manage- ment

  11. Negative Correlation in Incremental Learning L. Minku, H. Inoue

    E-Print Network [OSTI]

    Yao, Xin

    network of the ensemble to learn new data is taken and the test error is high. When all the neural developed until now, the training procedure needs all training data simultaneously to perform learning classes that may be introduced with new data. There are several algorithms proposed to perform incremental

  12. Adaptive Probabilistic Visual Tracking with Incremental Subspace Update

    E-Print Network [OSTI]

    Yang, Ming-Hsuan

    Adaptive Probabilistic Visual Tracking with Incremental Subspace Update David Ross1 , Jongwoo Lim2 of the objects being tracked are invariant to internal appearance change or external variation such as lighting at the outset. In this paper, we present an adaptive probabilistic tracking algorithm that updates the models

  13. Aprendizaje Incremental en Sistemas Multi-Agente BDI

    E-Print Network [OSTI]

    Guerra Hernández, Alejandro

    Aprendizaje Incremental en Sistemas Multi-Agente BDI Gustavo Ortiz Hern´andez Director de Tesis: Alejandro Guerra Hern´andez Tesis presentada para obtener el grado de Maestro en Inteligencia Artificial innumerable material de apoyo brindado, sin el cual no hubiera sido posible esta tesis. A la Dra. Cora Beatriz

  14. INTERFACE CONTROL AND INCREMENTAL DEVELOPMENT IN THE PIC ENVIRONMENT

    E-Print Network [OSTI]

    Wolf, Alexander L.

    INTERFACE CONTROL AND INCREMENTAL DEVELOPMENT IN THE PIC ENVIRONMENT Alexander L. Wolf, Lori A University of Massachusetts Amherst, Massachusetts 01663 ABSTRACT The PIC environment is designed to provide component of the PIC environment and demonstrates how it contributes to precise interface control

  15. Incremental Partitioning-Based Vectorless Power Grid Verification

    E-Print Network [OSTI]

    Najm, Farid N.

    Incremental Partitioning-Based Vectorless Power Grid Verification Dionysios Kouroussis Department performance of a chip, design verification of the power grid is of critical importance. This paper builds the efficient verification of local power grid sections or blocks, enabling incremen- tal design analysis

  16. An Incremental and Nonbinary CSP Solver: The Hyperpolyhedron Search Algorithm

    E-Print Network [OSTI]

    Rossi, Francesca

    An Incremental and Non­binary CSP Solver: The Hyperpolyhedron Search Algorithm Miguel A. Salido and scheduling can be expressed in a natural way as a Constraint Satisfaction Problem (CSP). It is well known that a non­binary CSP can be transformed into an equivalent binary CSP using some of the actual techniques

  17. Incremental Web Search: Tracking Changes in the Web

    E-Print Network [OSTI]

    Mohri, Mehryar

    Incremental Web Search: Tracking Changes in the Web by Ziyang Wang A dissertation submitted amount of new information is posted on the Web every day. Large-scale web search engines often update our solutions of searching new information from the web by tracking the changes of web documents

  18. Incremental Web Search: Tracking Changes in the Web

    E-Print Network [OSTI]

    Mohri, Mehryar

    Incremental Web Search: Tracking Changes in the Web by Ziyang Wang A dissertation submitted #12; Abstract A large amount of new information is posted on the Web every day. Large­scale web search. In this thesis, we present our solutions of searching new information from the web by tracking the changes of web

  19. Transportation Services and Innovation in the Housing Industry: A Study of the Relations between Transportation and Production

    E-Print Network [OSTI]

    Souleyrette, Reginald R. II

    1992-01-01

    was an incremental product innovation. Its introduction wasindustry. Wallboard was a product innovation which led to aninterested in product/process innovations which enable more-

  20. DECENTRALIZING SEMICONDUCTOR CAPACITY PLANNING VIA INTERNAL MARKET COORDINATION

    E-Print Network [OSTI]

    Wu, David

    and S. DAVID WU Manufacturing Logistics Institute, Department of Industrial and Manufacturing Systems semiconductor manufacturer: marketing managers reserve capacity from manufacturing based on product demands, while attempting to maximize profit; manufacturing managers allocate capacity to competing marketing

  1. Electrical-assisted double side incremental forming and processes thereof

    SciTech Connect (OSTI)

    Roth, John; Cao, Jian

    2014-06-03

    A process for forming a sheet metal component using an electric current passing through the component is provided. The process can include providing a double side incremental forming machine, the machine operable to perform a plurality of double side incremental deformations on the sheet metal component and also apply an electric direct current to the sheet metal component during at least part of the forming. The direct current can be applied before or after the forming has started and/or be terminated before or after the forming has stopped. The direct current can be applied to any portion of the sheet metal. The electrical assistance can reduce the magnitude of force required to produce a given amount of deformation, increase the amount of deformation exhibited before failure and/or reduce any springback typically exhibited by the sheet metal component.

  2. ORISE: Capacity Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capacity Building Because public health agencies must maintain the resources to respond to public health challenges, critical situations and emergencies, the Oak Ridge Institute...

  3. Liquid heat capacity lasers

    DOE Patents [OSTI]

    Comaskey, Brian J. (Walnut Creek, CA); Scheibner, Karl F. (Tracy, CA); Ault, Earl R. (Livermore, CA)

    2007-05-01

    The heat capacity laser concept is extended to systems in which the heat capacity lasing media is a liquid. The laser active liquid is circulated from a reservoir (where the bulk of the media and hence waste heat resides) through a channel so configured for both optical pumping of the media for gain and for light amplification from the resulting gain.

  4. Shaped Offset QPSK Capacity

    E-Print Network [OSTI]

    Sahin, Cenk

    2012-08-31

    In this work we compute the capacities and the pragmatic capacities of military-standard shaped-offset quadrature phase-shift keying (SOQPSK-MIL) and aeronautical telemetry SOQPSK (SOQPSK-TG). In the pragmatic approach, SOQPSK is treated as a...

  5. Knudsen heat capacity

    SciTech Connect (OSTI)

    Babac, Gulru; Reese, Jason M.

    2014-05-15

    We present a “Knudsen heat capacity” as a more appropriate and useful fluid property in micro/nanoscale gas systems than the constant pressure heat capacity. At these scales, different fluid processes come to the fore that are not normally observed at the macroscale. For thermodynamic analyses that include these Knudsen processes, using the Knudsen heat capacity can be more effective and physical. We calculate this heat capacity theoretically for non-ideal monatomic and diatomic gases, in particular, helium, nitrogen, and hydrogen. The quantum modification for para and ortho hydrogen is also considered. We numerically model the Knudsen heat capacity using molecular dynamics simulations for the considered gases, and compare these results with the theoretical ones.

  6. Forward capacity market CONEfusion

    SciTech Connect (OSTI)

    Wilson, James F.

    2010-11-15

    In ISO New England and PJM it was assumed that sponsors of new capacity projects would offer them into the newly established forward centralized capacity markets at prices based on their levelized net cost of new entry, or ''Net CONE.'' But the FCCMs have not operated in the way their proponents had expected. To clear up the CONEfusion, FCCM designs should be reconsidered to adapt them to the changing circumstances and to be grounded in realistic expectations of market conduct. (author)

  7. Stochastic capacity modeling to support demand/capacity gap planning

    E-Print Network [OSTI]

    Niles, Augusta (Augusta L.)

    2014-01-01

    Capacity strategy has established methods of dealing with uncertainty in future demand. This project advances the concept of capacity strategy under conditions of uncertainty in cases where capacity is the primary source ...

  8. USING 3D COMPUTER MODELING, BOREHOLE GEOPHYSICS, AND HIGH CAPACITY PUMPS TO RESTORE PRODUCTION TO MARGINAL WELLS IN THE EAST TEXAS FIELD

    SciTech Connect (OSTI)

    R.L. Bassett

    2003-06-09

    Methods for extending the productive life of marginal wells in the East Texas Field were investigated using advanced computer imaging technology, geophysical tools, and selective perforation of existing wells. Funding was provided by the Department of Energy, TENECO Energy and Schlumberger Wireline and Testing. Drillers' logs for more than 100 wells in proximity to the project lease were acquired, converted to digital format using a numerical scheme, and the data were used to create a 3 Dimensional geological image of the project site. Using the descriptive drillers' logs in numerical format yielded useful cross sections identifying the Woodbine Austin Chalk contact and continuity of sand zones between wells. The geological data provided information about reservoir continuity, but not the amount of remaining oil, this was obtained using selective modern logs. Schlumberger logged the wells through 2 3/8 inch tubing with a new slimhole Reservoir Saturation Tool (RST) which can measure the oil and water content of the existing porosity, using neutron scattering and a gamma ray spectrometer (GST). The tool provided direct measurements of elemental content yielding interpretations of porosity, lithology, and oil and water content, confirming that significant oil saturation still exists, up to 50% in the upper Woodbine sand. Well testing was then begun and at the end of the project new oil was being produced from zones abandoned or bypassed more than 25 years ago.

  9. Compiler-Enhanced Incremental Checkpointing for OpenMP Applications

    SciTech Connect (OSTI)

    Bronevetsky, G; Marques, D; Pingali, K; McKee, S; Rugina, R

    2009-02-18

    As modern supercomputing systems reach the peta-flop performance range, they grow in both size and complexity. This makes them increasingly vulnerable to failures from a variety of causes. Checkpointing is a popular technique for tolerating such failures, enabling applications to periodically save their state and restart computation after a failure. Although a variety of automated system-level checkpointing solutions are currently available to HPC users, manual application-level checkpointing remains more popular due to its superior performance. This paper improves performance of automated checkpointing via a compiler analysis for incremental checkpointing. This analysis, which works with both sequential and OpenMP applications, significantly reduces checkpoint sizes and enables asynchronous checkpointing.

  10. Compiler-Enhanced Incremental Checkpointing for OpenMP Applications

    SciTech Connect (OSTI)

    Bronevetsky, G; Marques, D; Pingali, K; Rugina, R; McKee, S A

    2008-01-21

    As modern supercomputing systems reach the peta-flop performance range, they grow in both size and complexity. This makes them increasingly vulnerable to failures from a variety of causes. Checkpointing is a popular technique for tolerating such failures, enabling applications to periodically save their state and restart computation after a failure. Although a variety of automated system-level checkpointing solutions are currently available to HPC users, manual application-level checkpointing remains more popular due to its superior performance. This paper improves performance of automated checkpointing via a compiler analysis for incremental checkpointing. This analysis, which works with both sequential and OpenMP applications, reduces checkpoint sizes by as much as 80% and enables asynchronous checkpointing.

  11. Dual capacity reciprocating compressor

    DOE Patents [OSTI]

    Wolfe, Robert W. (Wilkinsburg, PA)

    1984-01-01

    A multi-cylinder compressor 10 particularly useful in connection with northern climate heat pumps and in which different capacities are available in accordance with reversing motor 16 rotation is provided with an eccentric cam 38 on a crank pin 34 under a fraction of the connecting rods, and arranged for rotation upon the crank pin between opposite positions 180.degree. apart so that with cam rotation on the crank pin such that the crank throw is at its normal maximum value all pistons pump at full capacity, and with rotation of the crank shaft in the opposite direction the cam moves to a circumferential position on the crank pin such that the overall crank throw is zero. Pistons 24 whose connecting rods 30 ride on a crank pin 36 without a cam pump their normal rate with either crank rotational direction. Thus a small clearance volume is provided for any piston that moves when in either capacity mode of operation.

  12. Dual capacity reciprocating compressor

    DOE Patents [OSTI]

    Wolfe, R.W.

    1984-10-30

    A multi-cylinder compressor particularly useful in connection with northern climate heat pumps and in which different capacities are available in accordance with reversing motor rotation is provided with an eccentric cam on a crank pin under a fraction of the connecting rods, and arranged for rotation upon the crank pin between opposite positions 180[degree] apart so that with cam rotation on the crank pin such that the crank throw is at its normal maximum value all pistons pump at full capacity, and with rotation of the crank shaft in the opposite direction the cam moves to a circumferential position on the crank pin such that the overall crank throw is zero. Pistons whose connecting rods ride on a crank pin without a cam pump their normal rate with either crank rotational direction. Thus a small clearance volume is provided for any piston that moves when in either capacity mode of operation. 6 figs.

  13. Geothermal Plant Capacity Factors

    SciTech Connect (OSTI)

    Greg Mines; Jay Nathwani; Christopher Richard; Hillary Hanson; Rachel Wood

    2015-01-01

    The capacity factors recently provided by the Energy Information Administration (EIA) indicated this plant performance metric had declined for geothermal power plants since 2008. Though capacity factor is a term commonly used by geothermal stakeholders to express the ability of a plant to produce power, it is a term frequently misunderstood and in some instances incorrectly used. In this paper we discuss how this capacity factor is defined and utilized by the EIA, including discussion on the information that the EIA requests from operations in their 923 and 860 forms that are submitted both monthly and annually by geothermal operators. A discussion is also provided regarding the entities utilizing the information in the EIA reports, and how those entities can misinterpret the data being supplied by the operators. The intent of the paper is to inform the facility operators as the importance of the accuracy of the data that they provide, and the implications of not providing the correct information.

  14. Capacity Demand Power (GW)

    E-Print Network [OSTI]

    California at Davis, University of

    Capacity Demand Power (GW) Hour of the Day The "Dip" Electricity Demand in Electricity Demand Every weekday, Japan's electricity use dips about 6 GW at 12 but it also shows that: · Behavior affects naHonal electricity use in unexpected ways

  15. Incremental Program Testing Using Program Dependence Graphs SAMUEL BATES SUSAN HORWITZ

    E-Print Network [OSTI]

    Horwitz, Susan B.

    data adequacy is a widely accepted concept for pro­ viding some confidence that a particular test suiteIncremental Program Testing Using Program Dependence Graphs SAMUEL BATES SUSAN HORWITZ samuel as the basis for incremental program testing when using test data adequacy criteria. Test data adequacy

  16. Incremental Integration Tools for Chemical Engineering: An Industrial Application of Triple Graph

    E-Print Network [OSTI]

    Westfechtel, Bernhard

    Incremental Integration Tools for Chemical Engineering: An Industrial Application of Triple Graph problems in a specific domain, namely design processes in chemical engineering. Here, different design and tools for chemical engineering design. In IMPROVE, we realized a framework for building incremental

  17. The Incremental Reach and Cost Efficiency of Online Video Ads over TV Ads

    E-Print Network [OSTI]

    Cortes, Corinna

    The Incremental Reach and Cost Efficiency of Online Video Ads over TV Ads Yuxue Jin, Sheethal number of brand marketers are including video ads in their advertising campaigns. These advertisers would like to know the incremental reach and cost efficiency of their video and display ads compared

  18. Impact Of Ranking Of Organic Search Results On The Incrementality Of Search Ads

    E-Print Network [OSTI]

    Cortes, Corinna

    Impact Of Ranking Of Organic Search Results On The Incrementality Of Search Ads David X. Chan Results On The Incrementality Of Search Ads Abstract 1 Introduction 2 Methodology 3 MetaAnalysis Results 4 that on average 89% of the visits to the advertiser's site from search ad

  19. An Incremental Parallel Particle Swarm Approach for Classification Rule Discovery from Dynamic Data

    E-Print Network [OSTI]

    Lee, WonSook

    , we propose a novel incremental parallel Particle Swarm Optimization (PSO) approach for classification to extract the rules from data chunks, we introduce an incremental PSO algorithm in which the previously knowledge. To support the parallelism, we assign a PSO thread for each data chunk. As soon as all the PSO

  20. Transparent Incremental State Saving in Time Warp Parallel Discrete Event Robert Rnngren, Michael Liljenstam Johan Montagnat

    E-Print Network [OSTI]

    Boyer, Edmond

    Transparent Incremental State Saving in Time Warp Parallel Discrete Event Simulation Robert is the state saving mechanism. It should not only allow efficient state saving, but also support efficient is transparent to the user. In this paper we present a method to implement a transparent incremental state saving

  1. CSTI high capacity power

    SciTech Connect (OSTI)

    Winter, J.M.

    1994-09-01

    The SP-100 program was established in 1983 by DOD, DOE, and NASA as a joint program to develop the technology necessary for space nuclear power systems for military and civil application. During FY86 and 87, the NASA SP-100 Advanced Technology Program was devised to maintain the momentum of promising technology advancement efforts started during Phase I of SP-100 and to strengthen, in key areas, the chances for successful development and growth capability of space nuclear reactor power systems for future space applications. In FY88, the Advanced Technology Program was incorporated into NASA`s new Civil Space Technology Initiative (CSTI). The CSTI Program was established to provide the foundation for technology development in automation and robotics, information, propulsion, and power. The CSTI High Capacity Power Program builds on the technology efforts of the SP-100 program, incorporates the previous NASA SP-100 Advanced Technology project, and provides a bridge to NASA Project Pathfinder. The elements of CSTI High Capacity Power development include Conversion Systems, Thermal Management, Power Management, System Diagnostics, and Environmental Interactions. Technology advancement in all areas, including materials, is required to assure the high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems. The overall program will develop and demonstrate the technology base required to provide a wide range of modular power systems as well as allowing mission independence from solar and orbital attitude requirements. Several recent advancements in CSTI High Capacity power development will be discussed.

  2. Seismic Performance Evaluation of the Jacket Type Offshore Platforms through Incremental Dynamic Analysis considering Soil-Pile-Structure Interaction

    SciTech Connect (OSTI)

    Asgarian, Behrouz [K.N. Toosi University of Technology Tehran Iran (Iran, Islamic Republic of); Shokrgozar, Hamed R.; Talarposhti, Ali Shakeri [K.N. Toosi University of Technology, Tehran (Iran, Islamic Republic of)

    2008-07-08

    Of great interest in Performance-Based Earthquake Engineering (PBEE) is the accurate estimation of the seismic performance of structures. A performance prediction and evaluation procedure is based on nonlinear dynamics and reliability theory. In this method, a full integration over the three key stochastic models is as follow: ground motion hazard curve, nonlinear dynamic displacement demand, and displacement capacity. Further, both epistemic and aleatory uncertainties are evaluated and carried through the analysis.In this paper, jacket and soil-pile system have been modeled using Finite Element program (OpenSees) and the incremental dynamic analysis (IDA) are performed to investigate nonlinear behavior of offshore platforms. The system demand is determined by performing time history response analyses of the jacket under a suite of FEMA/SAC uniform hazard ground motions. The system capacity in terms of the drift ratio against incipient collapse is generally difficult to predict since the structural response goes into nonlinear range before collapse. All the analyses are performed in two directions and the results are compared with each others. The confidence level of a jacket in each direction for a given hazard level is calculated using the procedure described.

  3. Transmission Capacity Forum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout / Transforming Y-12Capacity-Forum Sign In About | Careers |

  4. IEEE TRANSACTIONS ON SIGNAL PROCESSING, VOL. 59, NO. 4, APRIL 2011 1465 Analysis of Spatial and Incremental LMS Processing

    E-Print Network [OSTI]

    Sayed, Ali

    and Incremental LMS Processing for Distributed Estimation Federico S. Cattivelli, Student Member, IEEE, and Ali H- plementations are distributed and network-based; they are spatial LMS and incremental LMS. In both algorithms study deal with centralized implementations of spatial and incremental LMS. In these latter cases, all

  5. An Experimental and Numerical Investigation of the Steady State Forces in Single Incremental Sheet Forming 

    E-Print Network [OSTI]

    Nair, Mahesh

    2012-10-19

    Incremental sheet forming process is a relatively new method of forming which is increasingly being used in the industry. Complex shapes can be manufactured using this method and the forming operation doesn't require any ...

  6. A phased approach to distribution network optimization given incremental supply chain change

    E-Print Network [OSTI]

    Riechel, Patrick

    2012-01-01

    This thesis addresses the question of how to optimize a distribution network when the supply chain has undergone an incremental change. A case study is presented for Company A, a major global biotechnology company that ...

  7. Street as structure : an approach to the incremental development of Fort Point Channel

    E-Print Network [OSTI]

    Powers, Darleen D

    1980-01-01

    This work seeks to create an approach to the incremental development of a warehouse district in the City of Boston. The focus of the thesis is on the generation of rules and an implementation process that will organize the ...

  8. A Few Days of A Robot's Life in the Human's World: Toward Incremental Individual Recognition

    E-Print Network [OSTI]

    Aryananda, Lijin

    2007-04-03

    This thesis presents an integrated framework and implementation for Mertz, an expressive robotic creature for exploring the task of face recognition through natural interaction in an incremental and unsupervised fashion. ...

  9. A few days of a robot's life in the human's world : toward incremental individual recognition

    E-Print Network [OSTI]

    Aryananda, Lijin, 1975-

    2007-01-01

    This thesis presents an integrated framework and implementation for Mertz, an expressive robotic creature for exploring the task of face recognition through natural interaction in an incremental and unsupervised fashion. ...

  10. Local Search for Incremental Satis ability Jos'e Gutierrez and Amol Dattatraya Mali,

    E-Print Network [OSTI]

    Mali, Amol D.

    Local Search for Incremental Satis#12;ability Jos'e Gutierrez and Amol Dattatraya Mali, Dept: 1-414-229-2769 jose@uwm.edu, mali@miller.cs.uwm.edu Content Areas: Propositional Satis#12;ability

  11. Production

    Broader source: Energy.gov [DOE]

    Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of cultivation systems.

  12. Initial Production Capacity Investments for Commercializing Pharmaceutical Products

    E-Print Network [OSTI]

    Yuen, Ming Kwan

    2012-01-01

    one-time-use disposable tanks and mixers for pharmaceuticalproduction, disposable tanks and mixers can be utilized that

  13. Initial Production Capacity Investments for Commercializing Pharmaceutical Products

    E-Print Network [OSTI]

    Yuen, Ming Kwan

    2012-01-01

    Lenos. 1996. Real Options: Managerial Flexibility andour model and traditional real options analysis, a class ofinvestment projects. Real options analysis often uses

  14. AVLIS production plant project schedule and milestones

    SciTech Connect (OSTI)

    Not Available

    1984-11-15

    An AVLIS Production Plant Deployment Schedule for the engineering, procurement, and construction for both the Initial Increment of Production and the fully Activated Plant, has been developed by the project team consisting of Lawrence Livermore National Laboratory, Martin Marietta Energy Systems, Inc. with architect-engineer support from Bechtel National, Inc., Stone and Webster Engineering Corporation, and Westinghouse Corporation. The initial deployment phase consists of six separators modules and the three laser power amplifier modules consistent with the FY84 reference design with a name plate capacity of 5 million separative work units/yr followed by a full plant activation to approximately 13 million separative work units/yr. The AVLIS Production Plant project team's strategy for deployment schedule analysis focused on three schedule options: engineering limited schedule; authorization limited schedule; and funding limited project schedule. The three deployment schedule options developed by AVLIS project team have been classified in ranges such as an optimistic, rapid/moderate, or moderate/pessimistic based on the probability of meeting the individual schedule option's major milestones or program objectives of enriching uranium by the AVLIS process in an effective cost and schedule manner. 47 figures, 7 tables.

  15. Approximation Technique of Finite Capacity Queuing Networks Exploiting Petri Net Analysis

    E-Print Network [OSTI]

    Gribaudo, Marco

    Approximation Technique of Finite Capacity Queuing Networks Exploiting Petri Net Analysis Marco for deriving approximate measures for finite capacity queuing networks. The fact that buffers have finite capacity makes the analysis of such networks very difficult. Indeed, FC-QNs do not have a product form

  16. Capacity Building in Sharing Forest and Market Information Prague & Krtiny, Czech Republic, 25 October 2005

    E-Print Network [OSTI]

    Capacity Building in Sharing Forest and Market Information Prague & Krtiny, Czech Republic, 25 Specialist UNECE/FAO Timber Branch Geneva, Switzerland #12;Capacity Building in Sharing Forest and Market forest products market information #12;Capacity Building in Sharing Forest and Market Information Prague

  17. Total Working Gas Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)DecadeYear Jan3 November18.5 385.5Dry Production602 1,397 125 Q 69 0.11 Monthly

  18. Total Working Gas Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0Proved Reserves (BillionProduction(MillionGrossJarrett2009

  19. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168

  20. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacityof Last

  1. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacityof

  2. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168CapacityofVacuum

  3. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.

  4. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION / Refiner /

  5. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION / Refiner

  6. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION /

  7. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION / Cokers

  8. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION / CokersMethod

  9. Kenneth J. Turner. Incremental Requirements Specification with LOTOS. Requirements Engineering Journal, 2:132-151, Springer-Verlag, London, UK,

    E-Print Network [OSTI]

    Turner, Ken

    Kenneth J. Turner. Incremental Requirements Specification with LOTOS. Requirements Engineering with LOTOS Kenneth J. Turner Department of Computing Science and Mathematics University of Stirling, Stirling

  10. Policy Flash 2015-02- INCREMENTALLY FUNDING FIXED-PRICE ACTIONS Revised

    Broader source: Energy.gov [DOE]

    The purpose of this Flash is to inform you of a revision to Acquisition Letter AL2015-01, titled Incrementally Funding Fixed-Price Actions. The revision appears in the “What Guidance is included in this AL?” section under its “Approval” subsection. The revised language appears in italics. The revision grants authority to a Head of Contracting Activity to approve incremental funding of fixed-price actions for actions within his/her approval authority. The resulting Acquisition Letter is Acquisition Letter AL2015-01R. It replaces Acquisition Letter AL2015-01

  11. CAPACITY BUILDING ACTIVITIES Public Health

    E-Print Network [OSTI]

    Hill, Wendell T.

    CAPACITY BUILDING ACTIVITIES School of Public Health Dean Principal Investigator Community Advisory System Faculty & Students School of Public Health Faculty & Students Prince George's County Washington, D.C. Community Members Practitioners, Residents and Public Health Professionals Research Projects Forum (CAC

  12. U.S. Refinery Utilization and Capacity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE: AprilCubicProduction Capacity ofCrudeStocks

  13. Incremental stress and microstructural response of granular soils under undrained axisymmetric deformation

    E-Print Network [OSTI]

    Luding, Stefan

    Incremental stress and microstructural response of granular soils under undrained axisymmetric deformation N. Kumar, S. Luding & V. Magnanimo MultiScale Mechanics, CTW, MESA+ University of Twente, Enschede different deformation paths (history) affect the actual mechanical state of the system. Here, we study

  14. An Incremental Refining Spatial Join Algorithm for Estimating Query Results in GIS

    E-Print Network [OSTI]

    Leutenegger, Scott T.

    An Incremental Refining Spatial Join Algorithm for Estimating Query Results in GIS Wan D. Bae systems (GIS) must support large georeferenced data sets. Due to the size of these data sets finding ex this is the first work using this approach in GIS. We investigate different sampling method- ologies and evaluate

  15. Using Banyan Networks for Load-Balanced Switches with Incremental Update

    E-Print Network [OSTI]

    Chang, Cheng-Shang

    Using Banyan Networks for Load-Balanced Switches with Incremental Update Ching-Min Lien, Cheng@ee.nthu.edu.tw; jcheng@ee.nthu.edu.tw; lds@cs.nthu.edu.tw; jtliao@gibbs.ee.nthu.edu.tw Abstract--Load-balanced switches have received a lot of atten- tion lately as they are much more scalable than other existing switch

  16. Incremental Utility Elicitation with the Minimax Regret Decision Criterion Tianhan Wang

    E-Print Network [OSTI]

    Boutilier, Craig

    Incremental Utility Elicitation with the Minimax Regret Decision Criterion Tianhan Wang Department@cs.toronto.edu Abstract Utility elicitation is a critical function of any au- tomated decision aid, allowing decisions to be tai- lored to the preferences of a specific user. How- ever, the size and complexity of utility

  17. Incremental Clicks Impact Of Search Advertising David X. Chan, Yuan Yuan, Jim Koehler, Deepak Kumar

    E-Print Network [OSTI]

    Cortes, Corinna

    Incremental Clicks Impact Of Search Advertising David X. Chan, Yuan Yuan, Jim Koehler, Deepak Kumar the fraction of total clicks that can be attributed to search advertising. A meta-analysis of several hundred to the advertiser's site would not have occurred without the ad campaigns. 1 Introduction In recent years

  18. Negative correlation in incremental learning Fernanda Li Minku Hirotaka Inoue Xin Yao

    E-Print Network [OSTI]

    Yao, Xin

    network of the ensemble to learn new data is taken and the test error is high. When all the neural all training data simultaneously to perform learning and no posterior learning is possible networks that compose an ensemble is a desirable feature to perform incremental learning, for some

  19. Residual Stress In Sheet Metal Parts Made By Incremental Forming Process

    SciTech Connect (OSTI)

    Tanaka, Shigekazu; Nakamura, Tamotsu; Hayakawa, Kunio; Nakamura, Hideo; Motomura, Kazuo

    2007-05-17

    Incremental sheet metal forming, which uses a CNC forming stylus, is new flexible forming process not requiring the use of any expensive dies. We have applied the incremental forming process to dental prosthesis. This new process, however, posed difficult problems. After removing the outer portion of the incremental formed sheet metal part, the inner part is distorted. In this paper, the residual stress in the sheet metal part obtained by incremental forward stretch forming operations has been examined. Numerical simulations were conducted for solid elements. When small rigid ball slides on the metal sheet with a certain vertical feed, tension residual stress is produced in the upper layer of the sheet and compression stress in the lower. Then, the resultant moments throughout the sheet cause negative spring-back when the outer portion is removed. A systematic study of the behavior was conducted in this paper. Parameters considered included the tool radius and the vertical tool feed rate. The tip radius of forming stylus has a significant influence on the residual stress. The smaller radius of forming stylus, the larger bending force becomes. And new process with double forming styluses is examined to reduce the bending force.

  20. Energy Engineering Analysis Program, Fort Polk, Louisiana. Final executive summary, increment `f`

    SciTech Connect (OSTI)

    1988-06-01

    Executive Order 12003, dated 19 July 1977, initiated the U.S. Army`s energy conservation effort. Specifically, the Executive Order led to the development of the Army Facilities Energy Plan which directs Army Staff and Major Army Commands to develop detailed implementation plans for energy conservation. As a result of these directives, the Fort Worth District of the U.S. Army Corps of Engineers contracted for an Energy Engineering Analysis Program (EEAP) at Fort Polk, Louisiana. The EEAP included Increments `A`, `B`, `E`, and `G`. To accomplish the intent of Increment `P`, namely, providing low cost/no cost energy savings recommendations in the form of specific, practical instructions for use by the Facility Engineer, the following general steps were taken: (1) Consider treasures identified in Detailed Scope of Work. (2) identify other potential Low Cost/No Cost energy Conservation Measures (ECM) through discussions with Fort Polk personnel and field surveys by Graham Associates engineers. (3) Review Increments `A`, `B`, and `G` for ECM`s within the Facility Engineer`s funding authority; $200,000 for alteration projects and $1,000,000 for maintenance and repair type work. (4) Evaluate ECM`s using relevant data for other Increments of the ESAP, and develop new data where appropriate.

  1. The Incremental Evolution of Gaits for Hexapod Robots Gary B. Parker

    E-Print Network [OSTI]

    Parker, Gary B.

    The Incremental Evolution of Gaits for Hexapod Robots Gary B. Parker Computer Science Connecticut College New London, CT 06320 parker@conncoll.edu Abstract Gait control programs for hexapod robots. In this paper, we describe an application of this method to learn gaits for an actual hexapod robot. A cyclic

  2. Toward a State Landscape Policy: Incremental Planning and Management in Vermont1

    E-Print Network [OSTI]

    Toward a State Landscape Policy: Incremental Planning and Management in Vermont1 Mark B. Lapping 2, University of Vermont, Burlington, VT 05405. Abstract: The issue of landscape management and enhancement has been of deep concern to Vermonters for many decades. This concern, which has been institutionalized

  3. LABORATORY TESTING OF STRESS-INDUCED BRITTLE FRACTURE DAMAGE THROUGH INCREMENTAL LOADING

    E-Print Network [OSTI]

    Eberhardt, Erik

    LABORATORY TESTING OF STRESS-INDUCED BRITTLE FRACTURE DAMAGE THROUGH INCREMENTAL LOADING Erik-induced brittle fracture damage as a function of the applied load. Strain gauge and acoustic emission measurements of brittle fracture development and to quantify the corresponding permanent strain damage. This paper reports

  4. Worldwide Energy Efficiency Action through Capacity Building...

    Open Energy Info (EERE)

    Worldwide Energy Efficiency Action through Capacity Building and Training (WEACT) Jump to: navigation, search Logo: Worldwide Energy Efficiency Action through Capacity Building and...

  5. Hybrid Zero-capacity Channels

    E-Print Network [OSTI]

    Sergii Strelchuk; Jonathan Oppenheim

    2012-07-04

    There are only two known kinds of zero-capacity channels. The first kind produces entangled states that have positive partial transpose, and the second one - states that are cloneable. We consider the family of 'hybrid' quantum channels, which lies in the intersection of the above classes of channels and investigate its properties. It gives rise to the first explicit examples of the channels, which create bound entangled states that have the property of being cloneable to the arbitrary finite number of parties. Hybrid channels provide the first example of highly cloneable binding entanglement channels, for which known superactivation protocols must fail - superactivation is the effect where two channels each with zero quantum capacity having positive capacity when used together. We give two methods to construct a hybrid channel from any binding entanglement channel. We also find the low-dimensional counterparts of hybrid states - bipartite qubit states which are extendible and possess two-way key.

  6. Factory capacity limits Machine dependencies

    E-Print Network [OSTI]

    Foley, Simon

    Factory capacity limits Machine dependencies Employee scheduling Raw material availability Other internal operations (and also possibly the actions of other suppliers that supply raw materials) and at an international workshop at the multi-agent conference (AAMAS'06). Manufacturer Customer demand Penalties for non

  7. Constrained capacity of MIMO Rayleigh fading channels 

    E-Print Network [OSTI]

    He, Wenyan

    2011-08-08

    though) as the deflnition of outage capacity in (2.4). Telatar conjectured that the optimal input covariance matrix Q is a diagonal matrix with the power equally shared among a subset of the transmit antennas [1]. Furthermore, the higher the rate... . . . . . . . . . . . . . . . . . . . . . . . 8 B. Outage Capacity . . . . . . . . . . . . . . . . . . . . . . . 9 III PSK CONSTRAINED MIMO CAPACITY : : : : : : : : : : : : 13 A. PSK Constrained MIMO Capacity . . . . . . . . . . . . . 13 1. The Covariance Matrix...

  8. Online Capacity Identification of Multitier Websites Using

    E-Print Network [OSTI]

    Xu, Cheng-Zhong

    to resource contention and algorithmic overhead for load management [15]. Knowledge about the server capacity

  9. Tri-Laboratory Linux Capacity Cluster 2007 SOW

    SciTech Connect (OSTI)

    Seager, M

    2007-03-22

    The Advanced Simulation and Computing (ASC) Program (formerly know as Accelerated Strategic Computing Initiative, ASCI) has led the world in capability computing for the last ten years. Capability computing is defined as a world-class platform (in the Top10 of the Top500.org list) with scientific simulations running at scale on the platform. Example systems are ASCI Red, Blue-Pacific, Blue-Mountain, White, Q, RedStorm, and Purple. ASC applications have scaled to multiple thousands of CPUs and accomplished a long list of mission milestones on these ASC capability platforms. However, the computing demands of the ASC and Stockpile Stewardship programs also include a vast number of smaller scale runs for day-to-day simulations. Indeed, every 'hero' capability run requires many hundreds to thousands of much smaller runs in preparation and post processing activities. In addition, there are many aspects of the Stockpile Stewardship Program (SSP) that can be directly accomplished with these so-called 'capacity' calculations. The need for capacity is now so great within the program that it is increasingly difficult to allocate the computer resources required by the larger capability runs. To rectify the current 'capacity' computing resource shortfall, the ASC program has allocated a large portion of the overall ASC platforms budget to 'capacity' systems. In addition, within the next five to ten years the Life Extension Programs (LEPs) for major nuclear weapons systems must be accomplished. These LEPs and other SSP programmatic elements will further drive the need for capacity calculations and hence 'capacity' systems as well as future ASC capability calculations on 'capability' systems. To respond to this new workload analysis, the ASC program will be making a large sustained strategic investment in these capacity systems over the next ten years, starting with the United States Government Fiscal Year 2007 (GFY07). However, given the growing need for 'capability' systems as well, the budget demands are extreme and new, more cost effective ways of fielding these systems must be developed. This Tri-Laboratory Linux Capacity Cluster (TLCC) procurement represents the ASC first investment vehicle in these capacity systems. It also represents a new strategy for quickly building, fielding and integrating many Linux clusters of various sizes into classified and unclassified production service through a concept of Scalable Units (SU). The programmatic objective is to dramatically reduce the overall Total Cost of Ownership (TCO) of these 'capacity' systems relative to the best practices in Linux Cluster deployments today. This objective only makes sense in the context of these systems quickly becoming very robust and useful production clusters under the crushing load that will be inflicted on them by the ASC and SSP scientific simulation capacity workload.

  10. Pre-Stressed Viscoelastic Composites: Effective Incremental Moduli and Band-Gap Tuning

    SciTech Connect (OSTI)

    Parnell, William J. [School of Mathematics, Alan Turing Building, University of Manchester, Manchester, M13 9PL (United Kingdom)

    2010-09-30

    We study viscoelastic wave propagation along pre-stressed nonlinear elastic composite bars. In the pre-stressed state we derive explicit forms for the effective incremental storage and loss moduli with dependence on the pre-stress. We also derive a dispersion relation for the effective wavenumber in the case of arbitrary frequency, hence permitting a study of viscoelastic band-gap tuning via pre-stress.

  11. The inclusion of damage effects in an incremental finite element analysis of composite plates 

    E-Print Network [OSTI]

    Kilpatrick, Mark Christopher

    1984-01-01

    , boron, carbon, graphite) supported in polymeric matrices and later ln light weight metal matrices. (mme- diatelyo the analysis of fiber composites began. Analyses of Fiber composites are approached from the micro- or macro-mechanics view- point... for ihe degree of MASTER OF SCIENCE December 1984 Major Subject: Mechanical Engineering THE INCLUSION OF DAMAGE EFFECTS IN AN INCREMENTAL FINITE ELEMENT ANALYSIS OF COMPOSITE PLATES A Thesis by MARK CHRISTOPHER KILPATRICK Approved as to style...

  12. High capacity immobilized amine sorbents

    DOE Patents [OSTI]

    Gray, McMahan L. (Pittsburgh, PA); Champagne, Kenneth J. (Fredericktown, PA); Soong, Yee (Monroeville, PA); Filburn, Thomas (Granby, CT)

    2007-10-30

    A method is provided for making low-cost CO.sub.2 sorbents that can be used in large-scale gas-solid processes. The improved method entails treating an amine to increase the number of secondary amine groups and impregnating the amine in a porous solid support. The method increases the CO.sub.2 capture capacity and decreases the cost of utilizing an amine-enriched solid sorbent in CO.sub.2 capture systems.

  13. 1994 lubricating oil and wax capacities of U. S. and Canadian refineries

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    The paper consists of several tables which list the names of US and Canadian refineries, their location, and their capacity for production of lubricating oil and waxes categorized by finishing operations and primary processing. A separate table lists US and Canadian re-refiners and their capacity for refining waste lubricating oils.

  14. Equilibrium Transitions from Non Renewable Energy to Renewable Energy under Capacity

    E-Print Network [OSTI]

    Equilibrium Transitions from Non Renewable Energy to Renewable Energy under Capacity Constraints 12 renewable and renewable energy sources with adjustment costs over the production capacity of renewable and a more expensive renewable energy, we show the following. With sufficiently abundant non renewable energy

  15. Capacity Factor Risk At Nuclear Power Plants

    E-Print Network [OSTI]

    Du, Yangbo

    We develop a model of the dynamic structure of capacity factor risk. It incorporates the risk that the capacity factor may vary widely from year-to-year, and also the risk that the reactor may be permanently shutdown prior ...

  16. Neural substrates of cognitive capacity limitations

    E-Print Network [OSTI]

    Buschman, Tim

    Cognition has a severely limited capacity: Adult humans can retain only about four items “in mind”. This limitation is fundamental to human brain function: Individual capacity is highly correlated with intelligence measures ...

  17. On the capacity of bosonic channels

    E-Print Network [OSTI]

    Blake, Christopher Graham

    2011-01-01

    The capacity of the bosonic channel with additive Gaussian noise is unknown, but there is a known lower bound that is conjectured to be the capacity. We have quantified the gap that exists between this known achievable ...

  18. How to Fit simply Soil Mechanics Behaviour with Incremental Modelling and to Describe Drained Cyclic Behaviours

    E-Print Network [OSTI]

    P. Evesque

    2005-07-04

    It has been proposed recently a new incremental modelling to describe the mechanics of soil. It is based on two parameters called the pseudo Young modulus E=1/Co and the pseudo Poisson coefficient n, which both evolve during compression. Evolution of n is known since it shall fit the Rowe's law of dilatancy, but Co has to be evaluated from experiment. In this paper we proposed a way to evaluate the Co variation from other mechanical modelling. The way cyclic behaviour of drained sample can be modelled is also described.

  19. Energy engineering analysis program, Fort Polk, Louisiana. Pre-final executive summary, increment `f`

    SciTech Connect (OSTI)

    1987-11-01

    Executive Order 12003, dated 19 July 1977, initiated the U.S. Army`s energy conservation effort. Specifically, the Executive Order led to the development of the Army Facilities Energy Plan which directs Army Staff and Major Army Commands to develop detailed implementation plans for energy conservation. As a result of these directives, the Fort Worth District of the U.S. Army Corps of Engineers contracted for an Energy Engineering Analysis Program (EEAP) at Fort Polk, Louisiana. The EEAP included Increments `A`, `B`, `E`, and `O`.

  20. Information Capacity of Energy Harvesting Sensor Nodes

    E-Print Network [OSTI]

    Sharma, Vinod

    Information Capacity of Energy Harvesting Sensor Nodes R Rajesh CABS, DRDO Bangalore, India Email by which the harvested energy is used. We find its Shannon capacity when it is transmitting its observations over an AWGN channel and show that the capacity achieving energy management policies are related

  1. High Wind Penetration Impact on U.S. Wind Manufacturing Capacity and Critical Resources

    SciTech Connect (OSTI)

    Laxson, A.; Hand, M. M.; Blair, N.

    2006-10-01

    This study used two different models to analyze a number of alternative scenarios of annual wind power capacity expansion to better understand the impacts of high levels of wind generated electricity production on wind energy manufacturing and installation rates.

  2. Capacity Value of Concentrating Solar Power Plants

    SciTech Connect (OSTI)

    Madaeni, S. H.; Sioshansi, R.; Denholm, P.

    2011-06-01

    This study estimates the capacity value of a concentrating solar power (CSP) plant at a variety of locations within the western United States. This is done by optimizing the operation of the CSP plant and by using the effective load carrying capability (ELCC) metric, which is a standard reliability-based capacity value estimation technique. Although the ELCC metric is the most accurate estimation technique, we show that a simpler capacity-factor-based approximation method can closely estimate the ELCC value. Without storage, the capacity value of CSP plants varies widely depending on the year and solar multiple. The average capacity value of plants evaluated ranged from 45%?90% with a solar multiple range of 1.0-1.5. When introducing thermal energy storage (TES), the capacity value of the CSP plant is more difficult to estimate since one must account for energy in storage. We apply a capacity-factor-based technique under two different market settings: an energy-only market and an energy and capacity market. Our results show that adding TES to a CSP plant can increase its capacity value significantly at all of the locations. Adding a single hour of TES significantly increases the capacity value above the no-TES case, and with four hours of storage or more, the average capacity value at all locations exceeds 90%.

  3. On the Shoulders of Giants: Incremental Influence Maximization in Evolving Social Networks

    E-Print Network [OSTI]

    Liu, Xiaodong; Li, Shanshan; Zhang, Jingying; Shao, Lisong; Huang, Chenlin; Xiao, Liquan

    2015-01-01

    Identifying the most influential individuals can provide invaluable help in developing and deploying effective viral marketing strategies. Previous studies mainly focus on designing efficient algorithms or heuristics to find top-K influential nodes on a given static social network. While, as a matter of fact, real-world social networks keep evolving over time and a recalculation upon the changed network inevitably leads to a long running time, significantly affecting the efficiency. In this paper, we observe from real-world traces that the evolution of social network follows the preferential attachment rule and the influential nodes are mainly selected from high-degree nodes. Such observations shed light on the design of IncInf, an incremental approach that can efficiently locate the top-K influential individuals in evolving social networks based on previous information instead of calculation from scratch. In particular, IncInf quantitatively analyzes the influence spread changes of nodes by localizing the im...

  4. Predicting Small Group Accretion in Social Networks: A topology based incremental approach

    E-Print Network [OSTI]

    Sharma, Ankit; Singhal, Kartik; Kuang, Rui; Srivastava, Jaideep

    2015-01-01

    Small Group evolution has been of central importance in social sciences and also in the industry for understanding dynamics of team formation. While most of research works studying groups deal at a macro level with evolution of arbitrary size communities, in this paper we restrict ourselves to studying evolution of small group (size $\\leq20$) which is governed by contrasting sociological phenomenon. Given a previous history of group collaboration between a set of actors, we address the problem of predicting likely future group collaborations. Unfortunately, predicting groups requires choosing from $n \\choose r$ possibilities (where $r$ is group size and $n$ is total number of actors), which becomes computationally intractable as group size increases. However, our statistical analysis of a real world dataset has shown that two processes: an external actor joining an existing group (incremental accretion (IA)) or collaborating with a subset of actors of an exiting group (subgroup accretion (SA)), are largely re...

  5. Product design for supply chain : quantifying the costs of complexity in Hewlett-Packard's retail desktop PC business

    E-Print Network [OSTI]

    Raphel, Aaron Matthew

    2005-01-01

    Over the past several years, Hewlett-Packard Company's North America Consumer Computing (NACC) division has faced pressures to increase retail product variety in response to growing customer demand. As they pursue incremental ...

  6. Voluntary Initiative: Partnering to Enhance Program Capacity...

    Energy Savers [EERE]

    Peer Exchange Call Series: Voluntary Initiative: Partnering to Enhance Program Capacity, Call Slides and Summary, May 8, 2014. Call Slides and Summary More Documents &...

  7. Increasing the Capacity of Existing Power Lines

    SciTech Connect (OSTI)

    2013-04-01

    The capacity of the grid has been largely unchanged for decades and needs to expand to accommodate new power plants and renewable energy projects.

  8. ,"Washington Natural Gas Underground Storage Capacity (MMcf)...

    U.S. Energy Information Administration (EIA) Indexed Site

    Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Washington Natural Gas Underground Storage Capacity (MMcf)",1,"Annual",2014 ,"Release...

  9. Solar Energy and Capacity Value (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-09-01

    This is a one-page, two-sided fact sheet on the capacity of solar power to provide value to utilities and power system operators.

  10. ,"Texas Natural Gas Underground Storage Capacity (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Texas Natural Gas Underground Storage Capacity (MMcf)",1,"Annual",2014 ,"Release Date:","9...

  11. Increasing water holding capacity for irrigation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Increasing water holding capacity for irrigation Reseachers recommend solutions for sediment trapping in irrigation system LANL and SNL leveraged technical expertise to determine...

  12. California: Conducting Polymer Binder Boosts Storage Capacity...

    Broader source: Energy.gov (indexed) [DOE]

    Nextval, Inc., Lawrence Berkeley National Laboratory (LBNL) developed a Conducting Polymer Binder for high-capacity lithium-ion batteries. With a focus on enabling smaller,...

  13. Oil Production Capacity Expansion Costs for the Persian Gulf

    Reports and Publications (EIA)

    1996-01-01

    Provides estimates of development and operating costs for various size fields in countries surrounding the Persian Gulf. In addition, a forecast of the required reserve development and associated costs to meet the expected demand through the year 2010 is presented.

  14. Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  15. Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting arravt015eswise2012p.pdf More Documents & Publications...

  16. Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation arravt015eswise2011p.pdf More Documents & Publications Expansion...

  17. Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015Executive Order 13514 Federal Leadership inExelonEnergyto

  18. Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015Executive Order 13514 Federal Leadership inExelonEnergytoDepartment

  19. U.S. Fuel Ethanol Plant Production Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global CrudeWhat's NewBarrels, Except Where Noted)U.S.

  20. U.S. Production Capacity of Operable Petroleum Refineries

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global CrudeWhat's NewBarrels,9,470Area:

  1. High-Capacity Sulfur Dioxide Absorbents for Diesel Emissions Control

    SciTech Connect (OSTI)

    Li, Liyu; King, David L.

    2005-01-05

    High capacity sulfur dioxide absorbents based on manganese oxide octahedral molecular sieves (OMS) have been identified. These materials are based on MnO6 octahedra sharing faces and edges to form various tunnel structures (2x2, 2x3, 2x4, 3x3) differentiated by the number of octahedra on a side. The SO2 capacities of these materials, measured at 325 C with a feed containing 250 ppmv SO2 in air, are as high as 70wt% (wt/wt), remarkably higher than conventional metal oxide-based SO2 absorbents. Among the OMS materials the 2x2 member, cryptomelane, exhibits the highest capacity and adsorption rate. Its SO2 absorption behavior has been further characterized as a function of temperature, space velocity, and feed composition. The dominant pathway for SO2 absorption is through the oxidation of SO2 to SO3 by Mn4+ followed by SO3 reaction with Mn2+ to form MnSO4. Absorption can occur in the absence of gas phase oxygen, with a moderate loss in overall capacity. The inclusion of reducible gases NO and CO in the feed does not reduce SO2 capacity. The absorption capacity decreases at high space velocity and lower absorption temperature, indicating the important role of diffusion of sulfate from the surface to the bulk of the material in order to reach full capacity. A color change of cryptomelane from black to yellow-brown after SO2 absorption can be used as an indicator of absorption progress. Cryptomelane can be synthesized using MnSO4 as a reagent. Therefore, after full SO2 absorption the product MnSO4 can be re-used as raw material for a subsequent cryptomelane synthesis. Cryptomelane has a similarly high capacity toward SO3, therefore it can be used for removal of all SOx species generated from a variety of combustion sources. Cryptomelane may find application as a replaceable absorbent for the removal of SOx from diesel truck exhaust, protecting downstream emissions control devices such as particulate filters and NOx traps.

  2. North Dakota Refining Capacity Study

    SciTech Connect (OSTI)

    Dennis Hill; Kurt Swenson; Carl Tuura; Jim Simon; Robert Vermette; Gilberto Marcha; Steve Kelly; David Wells; Ed Palmer; Kuo Yu; Tram Nguyen; Juliam Migliavacca

    2011-01-05

    According to a 2008 report issued by the United States Geological Survey, North Dakota and Montana have an estimated 3.0 to 4.3 billion barrels of undiscovered, technically recoverable oil in an area known as the Bakken Formation. With the size and remoteness of the discovery, the question became 'can a business case be made for increasing refining capacity in North Dakota?' And, if so what is the impact to existing players in the region. To answer the question, a study committee comprised of leaders in the region's petroleum industry were brought together to define the scope of the study, hire a consulting firm and oversee the study. The study committee met frequently to provide input on the findings and modify the course of the study, as needed. The study concluded that the Petroleum Area Defense District II (PADD II) has an oversupply of gasoline. With that in mind, a niche market, naphtha, was identified. Naphtha is used as a diluent used for pipelining the bitumen (heavy crude) from Canada to crude markets. The study predicted there will continue to be an increase in the demand for naphtha through 2030. The study estimated the optimal configuration for the refinery at 34,000 barrels per day (BPD) producing 15,000 BPD of naphtha and a 52 percent refinery charge for jet and diesel yield. The financial modeling assumed the sponsor of a refinery would invest its own capital to pay for construction costs. With this assumption, the internal rate of return is 9.2 percent which is not sufficient to attract traditional investment given the risk factor of the project. With that in mind, those interested in pursuing this niche market will need to identify incentives to improve the rate of return.

  3. Incremental Analysis of Power Grids using Backward Random Walks Baktash Boghrati and Sachin S. Sapatnekar, University of Minnesota, Minneapolis, MN

    E-Print Network [OSTI]

    Sapatnekar, Sachin

    intensive task. In this work, we first introduce an accurate modeling methodology for power grids thatA Incremental Analysis of Power Grids using Backward Random Walks Baktash Boghrati and Sachin S. Sapatnekar, University of Minnesota, Minneapolis, MN Power grid design and analysis is a critical part

  4. A Double-Deletion Method to Quantifying Incremental Binding Energies in Proteins from Experiment: Example of a Destabilizing Hydrogen

    E-Print Network [OSTI]

    Sancho, Javier

    A Double-Deletion Method to Quantifying Incremental Binding Energies in Proteins from Experiment: Example of a Destabilizing Hydrogen Bonding Pair Luis A. Campos,*y Santiago Cuesta-Lo´pez,*z Jon Lo of a specific hydrogen bond in apoflavodoxin to protein stability is investigated by combining theory

  5. Managing Capacity For Telecommunications Networks Under Uncertainty

    E-Print Network [OSTI]

    Forsyth, Peter A.

    the underlying risk factor in the bandwidth market, and then apply real options theory to the upgrade decision, this real options approach has not been used pre- viously in the area of network capacity planning--uncertain demand for capacity, real options, net- work planning I. INTRODUCTION In the past, bandwidth was traded

  6. REDUCTION CAPACITY OF SALTSTONE AND SALTSTONE COMPONENTS

    SciTech Connect (OSTI)

    Roberts, K.; Kaplan, D.

    2009-11-30

    The duration that saltstone retains its ability to immobilize some key radionuclides, such as technetium (Tc), plutonium (Pu), and neptunium (Np), depends on its capacity to maintain a low redox status (or low oxidation state). The reduction capacity is a measure of the mass of reductants present in the saltstone; the reductants are the active ingredients that immobilize Tc, Pu, and Np. Once reductants are exhausted, the saltstone loses its ability to immobilize these radionuclides. The reduction capacity values reported here are based on the Ce(IV)/Fe(II) system. The Portland cement (198 {micro}eq/g) and especially the fly ash (299 {micro}eq/g) had a measurable amount of reduction capacity, but the blast furnace slag (820 {micro}eq/g) not surprisingly accounted for most of the reduction capacity. The blast furnace slag contains ferrous iron and sulfides which are strong reducing and precipitating species for a large number of solids. Three saltstone samples containing 45% slag or one sample containing 90% slag had essentially the same reduction capacity as pure slag. There appears to be some critical concentration between 10% and 45% slag in the Saltstone formulation that is needed to create the maximum reduction capacity. Values from this work supported those previously reported, namely that the reduction capacity of SRS saltstone is about 820 {micro}eq/g; this value is recommended for estimating the longevity that the Saltstone Disposal Facility will retain its ability to immobilize radionuclides.

  7. Master Thesis Proposal: The role of stakeholder inertia in the Software Product Innovation Process (2 students)

    E-Print Network [OSTI]

    Master Thesis Proposal: The role of stakeholder inertia in the Software Product Innovation Process a competitive blend of radical and incremental innovation for the next software product. RG3: Explore the role4: Investigate how inertia influences different types of innovation (product, process, market

  8. DIVISION S-10-WETLAND SOILS Methane Production and Emissions from Four Reclaimed and Pristine Wetlands

    E-Print Network [OSTI]

    Florida, University of

    DIVISION S-10-WETLAND SOILS Methane Production and Emissions from Four Reclaimed and Pristine% of the plant-mediated emissions. Potential CRi production rates were measured as a function of depth using soil samples obtained at 2-cm increments. Methane production rates were the same order of magni- tude at all

  9. Representation of the Solar Capacity Value in the ReEDS Capacity Expansion Model: Preprint

    SciTech Connect (OSTI)

    Sigrin, B.; Sullivan, P.; Ibanez, E.; Margolis, R.

    2014-08-01

    An important emerging issue is the estimation of renewables' contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to resource variability. Reliability-based methods, particularly, effective load-carrying capacity (ELCC), are considered to be the most robust techniques for addressing this resource variability. The Regional Energy Deployment System (ReEDS) capacity expansion model and other long-term electricity capacity planning models require an approach to estimating CV for generalized PV and system configurations with low computational and data requirements. In this paper we validate treatment of solar photovoltaic (PV) capacity value by ReEDS capacity expansion model by comparing model results to literature for a range of energy penetration levels. Results from the ReEDS model are found to compare well with both comparisons--despite not being resolved at an hourly scale.

  10. Dynamic Rotor Deformation and Vibration Monitoring Using a Non-Incremental Laser Doppler Distance Sensor

    SciTech Connect (OSTI)

    Pfister, Thorsten; Guenther, Philipp; Dreier, Florian; Czarske, Juergen

    2010-05-28

    Monitoring rotor deformations and vibrations dynamically is an important task for improving the safety and the lifetime as well as the energy efficiency of motors and turbo machines. However, due to the high rotor speed encountered in particular at turbo machines, this requires concurrently a high measurement rate and high accuracy, which can not be fulfilled by most commercially available sensors. To solve this problem, we developed a non-incremental laser Doppler distance sensor (LDDS), which is able to measure simultaneously the in-plane velocity and the out-of-plane position of moving rough solid objects with micrometer precision. In addition, this sensor concurrently offers a high temporal resolution in the microsecond range, because its position uncertainty is in principle independent of the object velocity in contrast to conventional distance sensors, which is a unique feature of the LDDS. Consequently, this novel sensor enables precise and dynamic in-process deformation and vibration measurements on rotating objects, such as turbo machine rotors, even at very high speed. In order to evidence the capability of the LDDS, measurements of rotor deformations (radial expansion), vibrations and wobbling motions are presented at up to 50,000 rpm rotor speed.

  11. Incremental online object learning in a vehicular radar-vision fusion framework

    SciTech Connect (OSTI)

    Ji, Zhengping; Weng, Juyang; Luciw, Matthew; Zeng, Shuqing

    2010-10-19

    In this paper, we propose an object learning system that incorporates sensory information from an automotive radar system and a video camera. The radar system provides a coarse attention for the focus of visual analysis on relatively small areas within the image plane. The attended visual areas are coded and learned by a 3-layer neural network utilizing what is called in-place learning, where every neuron is responsible for the learning of its own signal processing characteristics within its connected network environment, through inhibitory and excitatory connections with other neurons. The modeled bottom-up, lateral, and top-down connections in the network enable sensory sparse coding, unsupervised learning and supervised learning to occur concurrently. The presented work is applied to learn two types of encountered objects in multiple outdoor driving settings. Cross validation results show the overall recognition accuracy above 95% for the radar-attended window images. In comparison with the uncoded representation and purely unsupervised learning (without top-down connection), the proposed network improves the recognition rate by 15.93% and 6.35% respectively. The proposed system is also compared with other learning algorithms favorably. The result indicates that our learning system is the only one to fit all the challenging criteria for the development of an incremental and online object learning system.

  12. Impact of incremental changes in meteorology on thermal compliance and power system operations

    SciTech Connect (OSTI)

    Miller, B.A.; Alavian, V.; Bender, M.D.

    1992-02-01

    The sensitivity of the TVA reservoir and power supply systems to extreme meteorology was evaluated using a series of mathematical models to simulate the relationship between incremental changes in meteorology, associated changes in water temperature, and power plant generation. Single variable analysis techniques were applied at selected TVA facilities for representative average and extreme weather conditions. In the analysis, base case simulations were first conducted for each representative year using observed meteorology (i.e., the no change condition). The impacts of changes in meteorology were subsequently analyzed by uniformly constant at their respective base case values. Project results are generally presented in terms of deviations from base case conditions for each representative year. Based on an analysis of natural flow and air temperature patterns at Chickamauga Dam, 1974 was selected to represent extreme cold-wet conditions; 1965 as reflecting average conditions; and 1986 as an example of an extremely hot-dry year. The extreme years (i.e., 1974 and 1986) were used to illustrate sensitivities beyond historical conditions; while the average year provided a basis for comparison. Observed reservoir conditions, such as inflows, dam releases, and reservoir elevations for each representative year, were used in the analysis and were assumed to remain constant in all simulations. Therefore, the Lake Improvement Plan (which was implemented in 1991) and its consequent effects on reservoir operations were not incorporated in the assessment. In the model simulations, computed water temperatures were based on vertically well-mixed conditions in the reservoirs.

  13. The production of iron carbide

    SciTech Connect (OSTI)

    Anderson, K.M.; Scheel, J. [Nucor Iron Carbide, Inc., Point Lisas (Trinidad and Tobago)

    1997-12-31

    From start-up in 1994 to present, Nucor`s Iron Carbide plant has overcome many obstacles in achieving design production. Many of these impediments were due to flaws in equipment design. With the integration existing within the plant, limitations in any one system reduced the operating capacity of others. For this reason, as modifications were made and system capacities were increased, the need for additional modifications became apparent. Subsequently, operating practices, maintenance scheduling, employee incentives, and production objectives were continually adapted. This paper discusses equipment and design corrections and the quality issues that contributed to achieving the plant`s production capacity.

  14. Capacity Building Project with Howard University

    Broader source: Energy.gov [DOE]

    The purpose of this initiative is to build community capacity for public participation in environmental and energy decision making. The target communities are those impacted by U.S. Department of...

  15. World crude capacity, conversion capability inch upward

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1994-12-19

    Reported world crude capacity increased almost 1 million b/d, while conversion processes--fluid catalytic cracking (FCC), hydrocracking, coking--increased more than 1.7 million b/d or 8.3%, according to the Journal's most recent survey of world refining capacity. As a measure of capacity growth in the past year, changes in distillation capacities (atmospheric plus vacuum) were calculated for three major refining regions. The year-to-year comparison indicates: for the US, an increase of 293,000 b/d, or 1.3%; for the European Economic Community (E.E.C.), an increase of 431,000 b/d, or 2.6%; and for Asia/Pacific, excluding China, an increase of 122,000 b/d, or 1.1%. In addition to the compiled data the paper describes the survey layout, regional changes, conversion units, hydroprocessing, company size, oxygenates, and construction.

  16. Tripling the capacity of wireless communications using

    E-Print Network [OSTI]

    channels of electric-®eld polarization for wireless communication. In order to make our statements more................................................................. Tripling the capacity of wireless .............................................................................................................................................. Wireless communications are a fundamental part of modern information infrastructure. But wireless bandwidth

  17. Capacities of linear quantum optical systems

    E-Print Network [OSTI]

    Lloyd, Seth

    A wide variety of communication channels employ the quantized electromagnetic field to convey information. Their communication capacity crucially depends on losses associated to spatial characteristics of the channel such ...

  18. National Decentralized Water Resources Capacity Development Project

    E-Print Network [OSTI]

    Gold, Art

    National Decentralized Water Resources Capacity Development Project Mapping Onsite Treatment Needs Onsite Treatment Needs, Pollution Risks, and Management Options Using GIS Submitted by the University. Wastewater Planning Handbook: Mapping Onsite Treatment Needs, Pollution Risks, and Management Options Using

  19. Measuring the capacity impacts of demand response

    SciTech Connect (OSTI)

    Earle, Robert; Kahn, Edward P.; Macan, Edo

    2009-07-15

    Critical peak pricing and peak time rebate programs offer benefits by increasing system reliability, and therefore, reducing capacity needs of the electric power system. These benefits, however, decrease substantially as the size of the programs grows relative to the system size. More flexible schemes for deployment of demand response can help address the decreasing returns to scale in capacity value, but more flexible demand response has decreasing returns to scale as well. (author)

  20. Exergy Analysis of Incremental Sheet Forming M.A. Dittrich1

    E-Print Network [OSTI]

    Gutowski, Timothy

    production, aluminum sheet production and energy conversion and supply) are included into the exergy analysis , C. Xia4 , V. Kiridena4 , F. Ren4 , H. Henning5 1 Laboratory for Manufacturing and Productivity Wilhelm Leibniz Universität Hannover, An der Universität 2, 30823 Garbsen, Germany Abstract Research

  1. Modern Wireless Network Design Based on Constrained Capacity

    E-Print Network [OSTI]

    Valenti, Matthew C.

    The capacity in this channel is: ­ where Eb is the energy per (information) bit. This capacity is achievedModern Wireless Network Design Based on Constrained Capacity April 20, 2005 Matthew Valenti Wireless Network Design Based on Constrained Capacity 2/37 Overview Key observations: ­ Capacity

  2. Development of high-capacity cathode materials with integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    high-capacity cathode materials with integrated structures Development of high-capacity cathode materials with integrated structures 2009 DOE Hydrogen Program and Vehicle...

  3. Development of High-Capacity Cathode Materials with Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Publications Development of High-Capacity Cathode Materials with Integrated Structures Development of High-Capacity Cathode Materials with Integrated Structures...

  4. Development of High-Capacity Cathode Materials with Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Publications Development of high-capacity cathode materials with integrated structures Development of High-Capacity Cathode Materials with Integrated Structures...

  5. Ukraine-Enhancing Capacity for Low Emission Development Strategies...

    Open Energy Info (EERE)

    Ukraine-Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) Jump to: navigation, search Name Ukraine-Enhancing Capacity for Low Emission Development Strategies...

  6. Mexico-Enhancing Capacity for Low Emission Development Strategies...

    Open Energy Info (EERE)

    Mexico-Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) Jump to: navigation, search Name Mexico-Enhancing Capacity for Low Emission Development Strategies...

  7. Study Finds 54 Gigawatts of Offshore Wind Capacity Technically...

    Energy Savers [EERE]

    Study Finds 54 Gigawatts of Offshore Wind Capacity Technically Possible by 2030 Study Finds 54 Gigawatts of Offshore Wind Capacity Technically Possible by 2030 September 11, 2014 -...

  8. Modeling-Thermo-electrochemistry, Capacity Degradation and Mechanics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modeling-Thermo-electrochemistry, Capacity Degradation and Mechanics with SEI Layer Modeling-Thermo-electrochemistry, Capacity Degradation and Mechanics with SEI Layer 2011 DOE...

  9. DOE Receives Responses on the Implementation of Large-Capacity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Large-Capacity Clothes Washer Waivers DOE Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process Electrolux Gibson Air Conditioner...

  10. India-Vulnerability Assessment and Enhancing Adaptive Capacities...

    Open Energy Info (EERE)

    India-Vulnerability Assessment and Enhancing Adaptive Capacities to Climate Change Jump to: navigation, search Name India-Vulnerability Assessment and Enhancing Adaptive Capacities...

  11. Bangladesh-Enhancing Capacity for Low Emission Development Strategies...

    Open Energy Info (EERE)

    Bangladesh-Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) Jump to: navigation, search Name Bangladesh-Enhancing Capacity for Low Emission Development...

  12. South Africa-Developing Climate Policy Capacity within the South...

    Open Energy Info (EERE)

    South Africa-Developing Climate Policy Capacity within the South African Department of Environmental Affairs (DEA) (Redirected from GIZ-Developing Climate Policy Capacity within...

  13. Indonesia-ECN Capacity building for energy policy formulation...

    Open Energy Info (EERE)

    Indonesia-ECN Capacity building for energy policy formulation and implementation of sustainable energy projects Jump to: navigation, search Name CASINDO: Capacity development and...

  14. Wireless Battery Management System for Safe High-Capacity Energy...

    Office of Scientific and Technical Information (OSTI)

    Wireless Battery Management System for Safe High-Capacity Energy Storage Citation Details In-Document Search Title: Wireless Battery Management System for Safe High-Capacity Energy...

  15. HT Combinatorial Screening of Novel Materials for High Capacity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HT Combinatorial Screening of Novel Materials for High Capacity Hydrogen Storage HT Combinatorial Screening of Novel Materials for High Capacity Hydrogen Storage Presentation for...

  16. CLEAN-Capacity Building and Training for Low Emissions Development...

    Open Energy Info (EERE)

    (LEDS): Capacity Building and Training to explore activity design, lessons learned, future capacity building plans, major ongoing needs and opportunities for enhanced...

  17. Representation of Solar Capacity Value in the ReEDS Capacity Expansion Model

    SciTech Connect (OSTI)

    Sigrin, B.; Sullivan, P.; Ibanez, E.; Margolis, R.

    2014-03-01

    An important issue for electricity system operators is the estimation of renewables' capacity contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to the resource variability. Reliability-based methods, particularly assessment of the Effective Load-Carrying Capacity, are considered to be the most robust and widely-accepted techniques for addressing this resource variability. This report compares estimates of solar PV capacity value by the Regional Energy Deployment System (ReEDS) capacity expansion model against two sources. The first comparison is against values published by utilities or other entities for known electrical systems at existing solar penetration levels. The second comparison is against a time-series ELCC simulation tool for high renewable penetration scenarios in the Western Interconnection. Results from the ReEDS model are found to compare well with both comparisons, despite being resolved at a super-hourly temporal resolution. Two results are relevant for other capacity-based models that use a super-hourly resolution to model solar capacity value. First, solar capacity value should not be parameterized as a static value, but must decay with increasing penetration. This is because -- for an afternoon-peaking system -- as solar penetration increases, the system's peak net load shifts to later in the day -- when solar output is lower. Second, long-term planning models should determine system adequacy requirements in each time period in order to approximate LOLP calculations. Within the ReEDS model we resolve these issues by using a capacity value estimate that varies by time-slice. Within each time period the net load and shadow price on ReEDS's planning reserve constraint signals the relative importance of additional firm capacity.

  18. Expansion fractionation capacity of the LPG-ULE plant

    SciTech Connect (OSTI)

    Morin, L.M.C.

    1999-07-01

    The Western Division of PDVSA has among other facilities a NGL Fractionation Complex located onshore in Ul'e. The complex consists of three plants, the first and second older plants, LPG-1 and LPG-2, which fractionate the NGL to produce propane, a butane mix and natural gasoline. The third plant, LPG-3, fractionates the butane mix from the LPG-1 and 2 plants to produce iso and normal butane. Several optimization projects already in progress will increase the NGL production to 12,200 b/d. For this reason it was decided to conduct a study of the existing fractionation facilities and utilities systems to determine their capacities. This evaluation revealed that some of the fractionation towers would have some limitations in the processing of the expected additional production. The study recommended an option to increase the capacity of the fractionation towers by lowering their operating pressure, in order to take advantage of relative volatility increase between the key components, which allows easier separation, as well as reducing the heat duty required. The completed study also determined that this option is more economically convenient than the replacement of the existing fractionation towers.

  19. OPEC production: Untapped reserves, world demand spur production expansion

    SciTech Connect (OSTI)

    Ismail, I.A.H. (Organization of the Petroleum Exporting Countries, Vienna (Austria))

    1994-05-02

    To meet projected world oil demand, almost all members of the Organization of Petroleum Exporting Countries (OPEC) have embarked on ambitious capacity expansion programs aimed at increasing oil production capabilities. These expansion programs are in both new and existing oil fields. In the latter case, the aim is either to maintain production or reduce the production decline rate. However, the recent price deterioration has led some major OPEC producers, such as Saudi Arabia and Iran, to revise downward their capacity plans. Capital required for capacity expansion is considerable. Therefore, because the primary source of funds will come from within each OPEC country, a reasonably stable and relatively high oil price is required to obtain enough revenue for investing in upstream projects. This first in a series of two articles discusses the present OPEC capacity and planned expansion in the Middle East. The concluding part will cover the expansion plans in the remaining OPEC countries, capital requirements, and environmental concerns.

  20. CSEM WP 124 Capacity Markets for Electricity

    E-Print Network [OSTI]

    California at Berkeley. University of

    CSEM WP 124 Capacity Markets for Electricity Anna Creti, LEEERNA, University of Toulouse for Electricity Anna Creti LEEERNA, University of Toulouse Natalia Fabra Universidad Carlos III de Madrid February 2004 Abstract The creation of electricity markets has raised the fundamental question as to whether

  1. STORAGE CAPACITY ALLOCATION ALGORITHMS FOR HIERARCHICAL

    E-Print Network [OSTI]

    Stavrakakis, Ioannis

    STORAGE CAPACITY ALLOCATION ALGORITHMS FOR HIERARCHICAL CONTENT DISTRIBUTION Nikolaos Laoutaris of Athens, 15784 Athens, Greece {laoutaris,vassilis,istavrak}@di.uoa.gr Abstract The addition of storage storage budget to the nodes of a hierarchical con- tent distribution system is formulated; optimal

  2. Fagatele Bay National Marine Sanctuary GIS Capacity

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    Fagatele Bay National Marine Sanctuary GIS Capacity Binder Index Background 2 Hardware, Software Report, configuration notes American Samoa Spatial Data Infrastructure Maps GIS Data CDs Operating System) #12;Compiled by Allison Graves, Nuna Technologies 2002. 2 Background A GIS presence was established

  3. FURTHER EXPERIMENTS IN FISHWAY CAPACITY, 1957

    E-Print Network [OSTI]

    in the fishway . Experiments in 1956 to measure the capacity of a pool-and-overf all- type fish- way were to accommodate the runs effec- tively. Appreciable savings in construction \\J Research financed by the U.S. Army of providing design criteria for more economical and more efficient fish-passage facili- ties at Corps projects

  4. Emergent Biosynthetic Capacity in Simple Microbial Communities

    E-Print Network [OSTI]

    Borenstein, Elhanan

    Emergent Biosynthetic Capacity in Simple Microbial Communities Hsuan-Chao Chiu1 , Roie Levy1 and dynamics of simple two-species microbial ecosystems. We specifically focus on detecting emergent a large collection of two-species communities on multiple media, we demonstrate that emergent biosynthetic

  5. tti.tamu.edu Increasing Capacity,

    E-Print Network [OSTI]

    Readers to Measure Wait Times at the U.S.-Mexico Border Computer Simulations Explore "What If" Disaster Wait Times at the U.S.-Mexico Border 8 Safety-Belt Use at All-Time High in Texas 10 Increasing Capacity. Today -- with the Internet cross-pollinating cultures between countries at the speed of light

  6. Optimal Prices for Finite Capacity Queueing Systems

    E-Print Network [OSTI]

    Ziya, Serhan

    Optimal Prices for Finite Capacity Queueing Systems Serhan Ziya Department of Statistics prove a lower bound on the optimal price for a fairly large class of blocking systems with general arrival and service processes, determine optimal price expressions for M/M/1/m and M/GI/s/s systems

  7. Electricity market module: Electricity capacity planning submodule

    SciTech Connect (OSTI)

    NONE

    1996-06-01

    The purpose of this report is to describe modifications to the Electricity Capacity Planning Submodule (ECP) for the Annual Energy Outlook 1996. It describes revisions to enhance the representation of planned maintenance, incorporate technological improvements in operating efficiencies, revise the algorithm for determining international firm power imports, and include risk premiums for new plant construction.

  8. Computing Wireless Capacity Magnus M. Halldorsson

    E-Print Network [OSTI]

    Halldórsson, Magnús M.

    Computing Wireless Capacity Magn´us M. Halld´orsson Roger Wattenhofer September 27, 2010 Abstract In this paper we address two common questions in wireless communication from an algorithmic perspective, assuming a geometric path loss model: First, how long does it take to satisfy an arbitrary set of wireless

  9. Incremental costs and optimization of in-core fuel management of nuclear power plants

    E-Print Network [OSTI]

    Watt, Hing Yan

    1973-01-01

    This thesis is concerned with development of methods for optimizing the energy production and refuelling decision for nuclear power plants in an electric utility system containing both nuclear and fossil-fuelled stations. ...

  10. On Asymptotic Outage Capacity Distribution of Correlated MIMO Channels

    E-Print Network [OSTI]

    Loyka, Sergey

    On Asymptotic Outage Capacity Distribution of Correlated MIMO Channels Georgy Levin* and Sergey condition for the asymptotic normality of MIMO channel outage capacity is considered. Some physical aspects, asymptotic capacity, correlation. I. INTRODUCTION Outage capacity is one of the major characteristics

  11. Status of Natural Gas Pipeline System Capacity Entering the 2000-2001 Heating Season

    Reports and Publications (EIA)

    2000-01-01

    This special report looks at the capabilities of the national natural gas pipeline network in 2000 and provides an assessment of the current levels of available capacity to transport supplies from production areas to markets throughout the United States during the upcoming heating season. It also examines how completion of currently planned expansion projects and proposed new pipelines would affect the network.

  12. The Availability and Price of Petroleum and Petroleum Products...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    oil producing countries in the Middle East and North Africa, amid low global surplus crude oil production capacity, has also lent support to crude oil prices. A framework...

  13. The Availability and Price of Petroleum and Petroleum Products...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    were mostly driven by increased supply outages (Table 2). Although global surplus crude oil production capacity averaged 2.2 million bbld in November and December, an increase...

  14. The Availability and Price of Petroleum and Petroleum Products...

    Gasoline and Diesel Fuel Update (EIA)

    1.3-million-bbld decline in global stocks in November and December, global surplus crude oil production capacity remains low and unplanned global supply disruptions remain...

  15. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High Volume...

  16. Air conditioning system with supplemental ice storing and cooling capacity

    DOE Patents [OSTI]

    Weng, Kuo-Lianq (Taichung, TW); Weng, Kuo-Liang (Taichung, TW)

    1998-01-01

    The present air conditioning system with ice storing and cooling capacity can generate and store ice in its pipe assembly or in an ice storage tank particularly equipped for the system, depending on the type of the air conditioning system. The system is characterized in particular in that ice can be produced and stored in the air conditioning system whereby the time of supplying cooled air can be effectively extended with the merit that the operation cycle of the on and off of the compressor can be prolonged, extending the operation lifespan of the compressor in one aspect. In another aspect, ice production and storage in great amount can be performed in an off-peak period of the electrical power consumption and the stored ice can be utilized in the peak period of the power consumption so as to provide supplemental cooling capacity for the compressor of the air conditioning system whereby the shift of peak and off-peak power consumption can be effected with ease. The present air conditioning system can lower the installation expense for an ice-storing air conditioning system and can also be applied to an old conventional air conditioning system.

  17. Entanglement area law from specific heat capacity

    E-Print Network [OSTI]

    Fernando G. S. L. Brandao; Marcus Cramer

    2015-08-20

    We study the scaling of entanglement in low-energy states of quantum many-body models on lattices of arbitrary dimensions. We allow for unbounded Hamiltonians such that systems with bosonic degrees of freedom are included. We show that if at low enough temperatures the specific heat capacity of the model decays exponentially with inverse temperature, the entanglement in every low-energy state satisfies an area law (with a logarithmic correction). This behaviour of the heat capacity is typically observed in gapped systems. Assuming merely that the low-temperature specific heat decays polynomially with temperature, we find a subvolume scaling of entanglement. Our results give experimentally verifiable conditions for area laws, show that they are a generic property of low-energy states of matter, and, to the best of our knowledge, constitute the first proof of an area law for unbounded Hamiltonians beyond those that are integrable.

  18. Planned Geothermal Capacity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPIProtectio1975) | OpenBethlehemPlainsboro Center,Planned Geothermal Capacity

  19. Incrementally, however, there were essentially three leaming srages that stjowed this development. 118 6rst

    E-Print Network [OSTI]

    Short, Daniel

    Dslowed iD th U.S. by public and govemmenbl cofteB about the safety of nuclear plants as well a6 the ability io handle md dispos of the nuclear wastes pmduced. Tb ecue safety in both power production md waste. Conclusion A nuclear anahical laborstory prcvides hany temins opportuities for both studentsmd teachers

  20. New constraints in absorptive capacity and the optimum rate of petroleum output

    SciTech Connect (OSTI)

    El Mallakh, R

    1980-01-01

    Economic policy in four oil-producing countries is analyzed within a framework that combines a qualitative assessment of the policy-making process with an empirical formulation based on historical and current trends in these countries. The concept of absorptive capacity is used to analyze the optimum rates of petroleum production in Iran, Iraq, Saudi Arabia, and Kuwait. A control solution with an econometric model is developed which is then modified for alternative development strategies based on analysis of factors influencing production decisions. The study shows the consistencies and inconsistencies between the goals of economic growth, oil production, and exports, and the constraints on economic development. Simulation experiments incorporated a number of the constraints on absorptive capacity. Impact of other constraints such as income distribution and political stability is considered qualitatively. (DLC)

  1. How Accurate are the Gaussian and Gamma Approximations to the Outage Capacity of MIMO Channels ?

    E-Print Network [OSTI]

    Øien, Geir E.

    How Accurate are the Gaussian and Gamma Approximations to the Outage Capacity of MIMO Channels MIMO capacity complementary cumulative distribution functions, or equivalently, the outage capacity distribution function (CDF) (also known as the outage capacity), or equivalently, the capacity complementary

  2. Modeling Capacity Reservation in High-Tech Manufacturing

    E-Print Network [OSTI]

    Wu, David

    by rapid innovation and volatile demands. Capacity reservation provides a risk sharing mechanism, manufacturers are confronted with capital intensive facilities and highly skilled labor, operating under long. Physical expansion of manufacturing capacity involves enormous risk. This involves building new facil

  3. Healthcare Facility Location and Capacity Configuration under Stochastic Demand 

    E-Print Network [OSTI]

    Han, Xue

    2014-12-18

    This dissertation addresses two topics. The first topic is strategic dynamic supply chain reconfiguration (DSCR) problem, in which the proposed capacity configuration network is employed in the second topic: healthcare facility location and capacity...

  4. Storage and capacity rights markets in the natural gas industry

    E-Print Network [OSTI]

    Paz-Galindo, Luis A.

    1999-01-01

    This dissertation presents a different approach at looking at market power in capacity rights markets that goes beyond the functional aspects of capacity rights markets as access to transportation services. In particular, ...

  5. Design and Evaluation of Novel High Capacity Cathode Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D.C. esp13thackeray.pdf More Documents & Publications Design and Evaluation of High Capacity Cathodes Design and Evaluation of Novel High Capacity Cathode Materials Design and...

  6. Evaluation of capacity release transactions in the natural gas industry

    E-Print Network [OSTI]

    Lautzenhiser, Stephen

    1994-01-01

    The purpose of this thesis is to analyze capacity release transactions in the natural gas industry and to state some preliminary conclusions about how the capacity release market is functioning. Given FERC's attempt to ...

  7. National CHP Roadmap: Doubling Combined Heat and Power Capacity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States by 2010, March 2001 National CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States...

  8. Property:Cooling Capacity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPIProtectio1975)EnergyFloorAreaOfficesCollaborators Jump to:Capacity Jump to:

  9. Africa - CCS capacity building | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavyAgencyTendoMassachusetts: EnergyRenewablesAfrica - CCS capacity

  10. Robust Capacity Planning in Semiconductor Manufacturing

    E-Print Network [OSTI]

    its sensitivity to product mix, the uncertainty in future demand, the long lead time for .... “windows” in the thick oxide/nitride film into the otherwise insulating silicon

  11. Managing High-Tech Capacity Expansion Via Reservation Contracts

    E-Print Network [OSTI]

    Wu, David

    1 Managing High-Tech Capacity Expansion Via Reservation Contracts Murat Erkoc S. David Wuñ, Bethlehem, PA 18015 merkoc@miami.edu david.wu@lehigh.eduñ We study capacity reservation contracts in high-tech lead time. We conclude the paper by summarizing insights useful for high-tech capacity management. 1

  12. On The Outage Capacity Distribution of Correlated Keyhole MIMO Channels

    E-Print Network [OSTI]

    Loyka, Sergey

    On The Outage Capacity Distribution of Correlated Keyhole MIMO Channels G. Levin and S. Loyka for the instantaneous SNR and outage capacity distributions of a spatially correlated keyhole MIMO channel are given diversity channel with a single Tx (Rx) and multiple Rx (Tx) antennas. The outage capacity at low outage

  13. Multi-Keyhole MIMO Channels: Asymptotic Analysis of Outage Capacity

    E-Print Network [OSTI]

    Loyka, Sergey

    Multi-Keyhole MIMO Channels: Asymptotic Analysis of Outage Capacity George Levin and Sergey Loyka single-keyhole channels. The outage capacity distribution of both full-rank and rank-deficient multi channel, outage capacity, correlation. I. INTRODUCTION Multiple-Input-Multiple-Output (MIMO) channels have

  14. Does Beamforming achieve Outage Capacity with Direction Feedback?

    E-Print Network [OSTI]

    Jafar, Syed A.

    Does Beamforming achieve Outage Capacity with Direction Feedback? Sudhir Srinivasa and Syed Ali: syed@ece.uci.edu, sudhirs@uci.edu Email: sriram@ece.utexas.edu Abstract We explore the outage capacity of outage capacity for a quantized channel direction feedback system. The technique is used to establish

  15. Transmission capacity of CDMA ad hoc networks Steven Weber

    E-Print Network [OSTI]

    de Veciana, Gustavo

    Transmission capacity of CDMA ad hoc networks Steven Weber Dept. of ECE Drexel University and tolerate co-located simultaneous transmissions. We develop analytic results on the transmission capacity of a CDMA ad hoc network. Transmission capacity is defined as the maximum permissible density

  16. Energy and Capacity Polar and essentially-polar sets

    E-Print Network [OSTI]

    Khoshnevisan, Davar

    Energy and Capacity Polar and essentially-polar sets Choose and fix a Borel set G R, and define #12;86 13. Energy and Capacity (Why?) In particular, set G := {} to see that a singleton := 0. Definition 2. (µ ) is called the mutual -energy between µ and , and Cap(G) the -capacity of G

  17. Energy-Efficient Capacity Optimization in Wireless Networks

    E-Print Network [OSTI]

    Wang, Yu

    Energy-Efficient Capacity Optimization in Wireless Networks Lu Liu, Xianghui Cao, Yu Cheng, Lili Du capacity in the most energy-efficient manner over a general large-scale wireless network, say, a multi for computing the resource allocation that leads to optimal network capacity with minimal energy consumption

  18. Online Multicasting for Network Capacity Maximization in Energy-Constrained

    E-Print Network [OSTI]

    Liang, Weifa

    Online Multicasting for Network Capacity Maximization in Energy-Constrained Ad Hoc Networks Weifa of network capacity, network lifetime, and transmission energy consumption for each multicast request, the network capacity is proportional to the network lifetime if the transmission energy consumption for each

  19. Capacity of a Gaussian MAC with Energy Harvesting Transmit Nodes

    E-Print Network [OSTI]

    Sharma, Vinod

    Capacity of a Gaussian MAC with Energy Harvesting Transmit Nodes R Rajesh CABS, DRDO Bangalore buffer to store the harvested energy. First, we find the capacity region of a GMAC powered by transmit. Keywords: Energy harvesting, Gaussian multiple access chan- nel, Finite Buffer, Shannon capacity. I

  20. Energy-Efficient Adaptive MIMO Systems Leveraging Dynamic Spare Capacity

    E-Print Network [OSTI]

    de Veciana, Gustavo

    Energy-Efficient Adaptive MIMO Systems Leveraging Dynamic Spare Capacity Hongseok Kim, Chan, energy conservation, spare capacity I. INTRODUCTION Wireless cellular systems such as WiMAX are evolving capacity, it is achieved in most cases at the expense of much higher energy consumption resulting

  1. Improved Capacity Bounds for the Binary Energy Harvesting Channel

    E-Print Network [OSTI]

    Yener, Aylin

    Improved Capacity Bounds for the Binary Energy Harvesting Channel Kaya Tutuncuoglu1 , Omur Ozel2 the encoder has unit energy storage capacity. We first show that an encoding scheme based on block indexing/channel use. The capacity of additive white Gaussian noise (AWGN) energy harvesting channel was studied in [2

  2. Sensory capacity: an information theoretical measure of the performance of a sensor

    E-Print Network [OSTI]

    Hartich, David; Seifert, Udo

    2015-01-01

    For a general sensory system following an external stochastic signal, we introduce the sensory capacity. This quantity characterizes the performance of a sensor: sensory capacity is maximal if the instantaneous state of the sensor has as much information about a signal as the whole time-series of the sensor. We show that adding a memory to the sensor increases the sensory capacity. This increase quantifies the improvement of the sensor with the addition of the memory. Our results are obtained with the framework of stochastic thermodynamics of bipartite systems, which allows for the definition of an efficiency that relates the rate with which the sensor learns about the signal with the energy dissipated by the sensor, which is given by the thermodynamic entropy production. We demonstrate a general tradeoff between sensory capacity and efficiency: if the sensory capacity is equal to its maximum 1, then the efficiency must be less than 1/2. As a physical realization of a sensor we consider a two component cellul...

  3. Coal Production 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-29

    Coal Production 1992 provides comprehensive information about US coal production, the number of mines, prices, productivity, employment, productive capacity, and recoverable reserves to a wide audience including Congress, Federal and State agencies, the coal industry, and the general public. In 1992, there were 3,439 active coal mining operations made up of all mines, preparation plants, and refuse operations. The data in Table 1 cover the 2,746 mines that produced coal, regardless of the amount of production, except for bituminous refuse mines. Tables 2 through 33 include data from the 2,852 mining operations that produced, processed, or prepared 10 thousand or more short tons of coal during the period, except for bituminous refuse, and includes preparation plants with 5 thousand or more employee hours. These mining operations accounted for over 99 percent of total US coal production and represented 83 percent of all US coal mining operations in 1992.

  4. Asia/Pacific refineries spark growth in conversion capacity

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1995-12-18

    Led by refiners in the Asia/Pacific region, worldwide capacity for conversion processes, such as fluid catalytic cracking, hydrocracking, and coking, increased at a faster pace this year than did crude oil distillation capacity. Crude capacity showed only a small gain of 0.4% to 74.5 million b/d according to the Journal`s most recent survey of refining capacity. This article summarizes data from the survey on the largest refiners, capacities, conversion processes, fuel processes, processing comparison, and refinery size.

  5. The Availability and Price of Petroleum and Petroleum Products...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    led by production in Iraq and Saudi Arabia (Table 2, Table 3). Global surplus crude oil production capacity averaged 1.7 million bd in May and June, 0.4 million bd lower...

  6. The Availability and Price of Petroleum and Petroleum Products...

    Gasoline and Diesel Fuel Update (EIA)

    three-year average production total of 4.0 million bbld (Table 1). * Global surplus crude oil production capacity in May and June was 2.4 million bbld, which is 0.3 million bbl...

  7. Information storage capacity of discrete spin systems

    E-Print Network [OSTI]

    Beni Yoshida

    2012-12-24

    Understanding the limits imposed on information storage capacity of physical systems is a problem of fundamental and practical importance which bridges physics and information science. There is a well-known upper bound on the amount of information that can be stored reliably in a given volume of discrete spin systems which are supported by gapped local Hamiltonians. However, all the previously known systems were far below this theoretical bound, and it remained open whether there exists a gapped spin system that saturates this bound. Here, we present a construction of spin systems which saturate this theoretical limit asymptotically by borrowing an idea from fractal properties arising in the Sierpinski triangle. Our construction provides not only the best classical error-correcting code which is physically realizable as the energy ground space of gapped frustration-free Hamiltonians, but also a new research avenue for correlated spin phases with fractal spin configurations.

  8. Prudhoe Bay Oil Production Optimization: Using Virtual

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    1 Prudhoe Bay Oil Production Optimization: Using Virtual Intelligence Techniques, Stage One: Neural total field oil production by optimizing the gas discharge rates and pressures at the separation handling capacity and subsequent oil production. 10 YEAR AVERAGE AMBIENT 1990-2000 & 2001, 2002 Averages

  9. Capacity Expansion with Independent Decision Makers

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    ) Maximize: Income ­ New plants ­ Maintenance ­ Expansion ­ Production ­ Transportation = 1 1 to minimize their cost · All producers try to maximize their profit Need to model the conflicting interests, operation, and distribution Problem Statement Maximize net present value (): · Determine expansion plan

  10. iSAVE: Incrementally Deployable Source Address Validation Jelena Mirkovic, Zhiguo Xu, Jun Li, Matthew Schnaider, Peter Reiher, and Lixia Zhang

    E-Print Network [OSTI]

    California at Los Angeles, University of

    iSAVE: Incrementally Deployable Source Address Validation Jelena Mirkovi´c, Zhiguo Xu, Jun Li of packets with spoofed source addresses. The SAVE protocol makes this information available at every router, although, in the absence of full deployment, it is difficult for SAVE to maintain either correct

  11. Modeling the Capacity and Emissions Impacts of Reduced Electricity Demand. Part 1. Methodology and Preliminary Results.

    E-Print Network [OSTI]

    Coughlin, Katie

    2013-01-01

    in emissions, primary energy, capacity and composition ofin primary energy use, emissions and capacity and the changei.e. energy, upper plots) and capacity variables. The plots

  12. Sixth Northwest Conservation and Electric Power Plan Chapter 12: Capacity and Flexibility Resources

    E-Print Network [OSTI]

    ..................................................................................................................................... 2 Power System Requirements: Capacity, Energy, and FlexibilitySixth Northwest Conservation and Electric Power Plan Chapter 12: Capacity and Flexibility Resources................................................... 2 Capacity: Meeting Peak Demand

  13. Building Capacity to Transform Zambia: What Motivates Government Officials to Learn Planning-related Skills?

    E-Print Network [OSTI]

    Kudo, Kana

    2015-01-01

    Department (2005). Capacity Building in Africa: An OEDModel): JICA Capacity Building Project for Implementation ofUnderstanding Capacity-Building Needs: Current Models for

  14. Surface and bulk modified high capacity layered oxide cathodes with low irreversible capacity loss

    DOE Patents [OSTI]

    Manthiram, Arumugam (Austin, TX); Wu, Yan (Austin, TX)

    2010-03-16

    The present invention includes compositions, surface and bulk modifications, and methods of making of (1-x)Li[Li.sub.1/3Mn.sub.2/3]O.sub.2.xLi[Mn.sub.0.5-yNi.sub.0.5-yCo.sub.2- y]O.sub.2 cathode materials having an O3 crystal structure with a x value between 0 and 1 and y value between 0 and 0.5, reducing the irreversible capacity loss in the first cycle by surface modification with oxides and bulk modification with cationic and anionic substitutions, and increasing the reversible capacity to close to the theoretical value of insertion/extraction of one lithium per transition metal ion (250-300 mAh/g).

  15. The NASA CSTI High Capacity Power Project

    SciTech Connect (OSTI)

    Winter, J.; Dudenhoefer, J.; Juhasz, A.; Schwarze, G.; Patterson, R.; Ferguson, D.; Titran, R.; Schmitz, P.; Vandersande, J.

    1994-09-01

    The SP-100 Space Nuclear Power Program was established in 1983 by DOD, DOE, and NASA as a joint program to develop technology for military and civil applications. Starting in 1986, NASA has funded a technology program to maintain the momentum of promising aerospace technology advancement started during Phase I of SP-100 and to strengthen, in key areas, the changes for successful development and growth capability of space nuclear reactor power systems for a wide range of future space applications. The elements of the CSTI High Capacity Power Project include Systems Analysis, Stirling Power Conversion, Thermoelectric Power Conversion, Thermal Management, Power Management, Systems Diagnostics, Environmental Interactions, and Material/Structural Development. Technology advancement in all elements is required to provide the growth capability, high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems. The overall project with develop and demonstrate the technology base required to provide a wide range of modular power systems compatible with the SP-100 reactor which facilitates operation during lunar and planetary day/night cycles as well as allowing spacecraft operation at any attitude or distance from the sun. Significant accomplishments in all of the project elements will be presented, along with revised goals and project timelines recently developed.

  16. SEVENTH FRAMEWORK PROGRAMME Capacities Specific Programme

    E-Print Network [OSTI]

    , advances in seismic testing techniques, maintenance of lab equipment, seismic qualification of products ....................................................4 4 Preparatory Course on Physical Modelling in Centrifuge Tests, IFSTTAR and UCAM .......6 5 on the Basics of modelling for seismic centrifuge tests. The fifth course, hosted at CEA, was on shaking table

  17. Attempt to distinguish long-range temporal correlations from the statistics of the increments by natural time analysis

    SciTech Connect (OSTI)

    Varotsos, P. A. [Solid State Section, Physics Department, University of Athens, Panepistimiopolis, Zografos 157 84, Athens (Greece); Solid Earth Physics Institute, Physics Department, University of Athens, Panepistimiopolis, Zografos 157 84, Athens (Greece); Sarlis, N. V.; Lazaridou, M. S. [Solid State Section, Physics Department, University of Athens, Panepistimiopolis, Zografos 157 84, Athens (Greece); Skordas, E. S. [Solid Earth Physics Institute, Physics Department, University of Athens, Panepistimiopolis, Zografos 157 84, Athens (Greece); Tanaka, H. K. [Earthquake Prediction Research Center, Tokai University 3-20-1, Shimizu-Orido, Shizuoka 424-8610 (Japan)

    2006-08-15

    Self-similarity may originate from two origins: i.e., the process memory and the process' increments 'infinite' variance. A distinction is attempted by employing the natural time {chi}. Concerning the first origin, we analyze recent data on seismic electric signals, which support the view that they exhibit infinitely ranged temporal correlations. Concerning the second, slowly driven systems that emit bursts of various energies E obeying the power-law distribution--i.e., P(E){approx}E{sup -{gamma}}--are studied. An interrelation between the exponent {gamma} and the variance {kappa}{sub 1}({identical_to}<{chi}{sup 2}>-<{chi}>{sup 2}) is obtained for the shuffled (randomized) data. For real earthquake data, the most probable value of {kappa}{sub 1} of the shuffled data is found to be approximately equal to that of the original data, the difference most likely arising from temporal correlation. Finally, it is found that the differential entropy associated with the probability P({kappa}{sub 1}) maximizes for {gamma} around {gamma}{approx_equal}1.6-1.7, which is comparable to the value determined experimentally in diverse phenomena: e.g., solar flares, icequakes, dislocation glide in stressed single crystals of ice, etc. It also agrees with the b value in the Gutenberg-Richter law of earthquakes. In addition, the case of multiplicative cascades is studied in the natural time domain.

  18. Development of High-Capacity Cathode Materials with Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Publications Development of High-Capacity Cathode Materials with Integrated Structures Vehicle Technologies Office Merit Review 2015: Design and Evaluation of High...

  19. Republic of Macedonia-Enhancing Capacity for Low Emission Development...

    Open Energy Info (EERE)

    Strategies (EC-LEDS) Jump to: navigation, search Name Republic of Macedonia-Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) AgencyCompany Organization...

  20. Design and Evaluation of Novel High Capacity Cathode Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    s049thackeray2012p.pdf More Documents & Publications Design and Evaluation of High Capacity Cathodes Vehicle Technologies Office Merit Review 2014: Design and Evaluation of High...

  1. Cambodia-Enhancing Capacity for Low Emission Development Strategies...

    Open Energy Info (EERE)

    Development Strategies (EC-LEDS) Jump to: navigation, search Name Cambodia-Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) AgencyCompany Organization...

  2. Design and Evaluation of Novel High Capacity Cathode Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Publications Lithium Source For High Performance Li-ion Cells Design and Evaluation of Novel High Capacity Cathode Materials Lithium Source For High Performance Li-ion Cells...

  3. Indonesia-Strengthening Planning Capacity for Low Carbon Growth...

    Open Energy Info (EERE)

    in Developing Asia Jump to: navigation, search Name Indonesia-Strengthening Planning Capacity for Low Carbon Growth in Developing Asia AgencyCompany Organization Asian...

  4. Enhancing Capacity for Low Emission Development Strategies (EC...

    Open Energy Info (EERE)

    Generation Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Enhancing Capacity for Low Emission Development Strategies (EC-LEDS): Distributed Generation Agency...

  5. Philippines-Strengthening Planning Capacity for Low Carbon Growth...

    Open Energy Info (EERE)

    in Developing Asia Jump to: navigation, search Name Philippines-Strengthening Planning Capacity for Low Carbon Growth in Developing Asia AgencyCompany Organization Asian...

  6. Design and Evaluation of Novel High Capacity Cathode Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Design and Evaluation of Novel High Capacity Cathode Materials Lithium Source For High Performance Li-ion Cells Lithium Source For...

  7. Design and Evaluation of Novel High Capacity Cathode Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    49thackeray2011o.pdf More Documents & Publications Cathodes Design and Evaluation of Novel High Capacity Cathode Materials Layered Cathode Materials...

  8. Africa Adaptation Programme: Capacity Building Experiences-Improving...

    Open Energy Info (EERE)

    Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Africa Adaptation Programme: Capacity Building Experiences-Improving Access, Understanding and Application of Climate...

  9. Vietnam-Strengthening Planning Capacity for Low Carbon Growth...

    Open Energy Info (EERE)

    Growth in Developing Asia Jump to: navigation, search Name Vietnam-Strengthening Planning Capacity for Low Carbon Growth in Developing Asia AgencyCompany Organization Asian...

  10. Strengthening Planning Capacity for Low Carbon Growth in Developing...

    Open Energy Info (EERE)

    Asia - Thailand Jump to: navigation, search Name Thailand-Strengthening Planning Capacity for Low Carbon Growth in Developing Asia AgencyCompany Organization Asian...

  11. Mesoporous Manganese Oxide Nanowires for High-Capacity, High...

    Office of Scientific and Technical Information (OSTI)

    Mesoporous Manganese Oxide Nanowires for High-Capacity, High-Rate, Hybrid Electrical Energy Storage Citation Details In-Document Search Title: Mesoporous Manganese Oxide Nanowires...

  12. ,"New Mexico Natural Gas Underground Storage Capacity (MMcf)...

    U.S. Energy Information Administration (EIA) Indexed Site

    Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","New Mexico Natural Gas Underground Storage Capacity (MMcf)",1,"Annual",2014 ,"Release Date:","9...

  13. Table 2. Ten Largest Plants by Generation Capacity, 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Oklahoma" ,"Plant","Primary energy source","Operating company","Net summer capacity (MW)" 1,"Northeastern","Coal","Public Service Co of Oklahoma",1815 2,"Redbud Power...

  14. Prices, capacities and service quality in a congestible Bertrand duopoly

    E-Print Network [OSTI]

    De Borger, Bruno; Van Dender, Kurt

    2005-01-01

    Dender, Kurt. 2004. “Duopoly prices under congested access,”of demand on capacities and prices, see (3), has been madefacilities, even when price discrimination is allowed. r dq

  15. Is there life in other markets? BPA explores preschedule capacity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    new process this spring to acquire preschedule (day-ahead) capacity from third-party suppliers. The goal was to prevent occasional balancing reserve reductions caused by...

  16. Table 2. Ten Largest Plants by Generation Capacity, 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Virginia" ,"Plant","Primary energy source","Operating company","Net summer capacity (MW)" 1,"Bath County","Pumped storage","Virginia Electric & Power Co",3003 2,"North...

  17. Temperature, Energy, and Heat Capacity of Asymptotically Anti-De Sitter Black Holes

    E-Print Network [OSTI]

    J. D. Brown; J. Creighton; R. B. Mann

    1994-05-03

    We investigate the thermodynamical properties of black holes in (3+1) and (2+1) dimensional Einstein gravity with a negative cosmological constant. In each case, the thermodynamic internal energy is computed for a finite spatial region that contains the black hole. The temperature at the boundary of this region is defined by differentiating the energy with respect to entropy, and is equal to the product of the surface gravity (divided by~$2\\pi$) and the Tolman redshift factor for temperature in a stationary gravitational field. We also compute the thermodynamic surface pressure and, in the case of the (2+1) black hole, show that the chemical potential conjugate to angular momentum is equal to the proper angular velocity of the black hole with respect to observers who are at rest in the stationary time slices. In (3+1) dimensions, a calculation of the heat capacity reveals the existence of a thermodynamically stable black hole solution and a negative heat capacity instanton. This result holds in the limit that the spatial boundary tends to infinity only if the comological constant is negative; if the cosmological constant vanishes, the stable black hole solution is lost. In (2+1) dimensions, a calculation of the heat capacity reveals the existence of a thermodynamically stable black hole solution, but no negative heat capacity instanton.

  18. Evaluating the potential for the continuous processing of pharmaceutical products - a supply network perspective

    E-Print Network [OSTI]

    Srai, Jagjit Singh; Harrington, Tomas; Alinaghian, Leila; Phillips, Mark

    2015-08-08

    combinations [45] and various pack sizes Inventory Est. Final product 3-6 months Est. Final product 3-6 months Est. Final product 3-6 months CapEx delta (batch -> continuous) Much existing capacity in place. Potential opportunities for reduced Capex... in continuous formulation of combinations Potential capex savings if new capacity is required, based on design calculations Alternative chemistry, with improved kinetics [46] enables continuous process to deliver increased capacity at lower capex...

  19. ANALYSIS OF THE CALIFORNIA ENERGY INDUSTRY

    E-Print Network [OSTI]

    Authors, Various

    2010-01-01

    Annual Incremental Energy and Capacity Savings from Passivein incremental annual energy and capacity savings of 3.1 Xand estimated energy and capacity savings for each.

  20. EVALUATION OF REQUIREMENTS FOR THE DWPF HIGHER CAPACITY CANISTER

    SciTech Connect (OSTI)

    Miller, D.; Estochen, E.; Jordan, J.; Kesterson, M.; Mckeel, C.

    2014-08-05

    The Defense Waste Processing Facility (DWPF) is considering the option to increase canister glass capacity by reducing the wall thickness of the current production canister. This design has been designated as the DWPF Higher Capacity Canister (HCC). A significant decrease in the number of canisters processed during the life of the facility would be achieved if the HCC were implemented leading to a reduced overall reduction in life cycle costs. Prior to implementation of the change, Savannah River National Laboratory (SRNL) was requested to conduct an evaluation of the potential impacts. The specific areas of interest included loading and deformation of the canister during the filling process. Additionally, the effect of the reduced wall thickness on corrosion and material compatibility needed to be addressed. Finally the integrity of the canister during decontamination and other handling steps needed to be determined. The initial request regarding canister fabrication was later addressed in an alternate study. A preliminary review of canister requirements and previous testing was conducted prior to determining the testing approach. Thermal and stress models were developed to predict the forces on the canister during the pouring and cooling process. The thermal model shows the HCC increasing and decreasing in temperature at a slightly faster rate than the original. The HCC is shown to have a 3°F ?T between the internal and outer surfaces versus a 5°F ?T for the original design. The stress model indicates strain values ranging from 1.9% to 2.9% for the standard canister and 2.5% to 3.1% for the HCC. These values are dependent on the glass level relative to the thickness transition between the top head and the canister wall. This information, along with field readings, was used to set up environmental test conditions for corrosion studies. Small 304-L canisters were filled with glass and subjected to accelerated environmental testing for 3 months. No evidence of stress corrosion cracking was indicated on either the canisters or U-bend coupons. Calculations and finite element modeling were used to determine forces over a range of handling conditions along with possible forces during decontamination. While expected reductions in some physical characteristics were found in the HCC, none were found to be significant when compared to the required values necessary to perform its intended function. Based on this study and a review of successful testing of thinner canisters at West Valley Demonstration Project (WVDP), the mechanical properties obtained with the thinner wall do not significantly undermine the ability of the canister to perform its intended function.

  1. On the Capacity of Hybrid Wireless Networks Benyuan Liu

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    On the Capacity of Hybrid Wireless Networks Benyuan Liu , Zhen Liu + , Don Towsley Department 704 Yorktown Heights, NY 10598 Abstract-- We study the throughput capacity of hybrid wireless networks stations are assumed to be connected by a high-bandwidth wired network and act as relays for wireless nodes

  2. A Framework for the Capacity Evaluation of Multihop Wireless Networks

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A Framework for the Capacity Evaluation of Multihop Wireless Networks Herv´e Rivano CNRS - INRIA and localized CDS. Index Terms--network capacity, multihop wireless networks, upper and lower bounds, linear programing I. INTRODUCTION Ad hoc networks are spontaneous multihop topologies of wireless nodes

  3. Storage Capacity of the Exponential Correlation Associative Memory

    E-Print Network [OSTI]

    Hancock, Edwin

    In this paper we analyze the pattern storage capacity of the exponential correlation asso- ciative memory(ECAM of the ECAM when presented with corrupted input patterns. Our model leads to an expression for the storage capacity of the ECAM both in terms of the length of the bit-patterns and the probabil- ity of bit

  4. Outage and Capacity Analysis of Cellular CDMA With Admission Control

    E-Print Network [OSTI]

    Chockalingam, A.

    Outage and Capacity Analysis of Cellular CDMA With Admission Control S. AnandÝ , A. Chockalingam. Ltd., Bangalore, INDIA Abstract-- We analyze the outage and capacity performance of an interference based admission control strategy in cellular CDMA systems. Most approaches to estimate the outage

  5. IEED Tribal Energy Development to Build Tribal Energy Development Capacity

    Broader source: Energy.gov [DOE]

    The Assistant Secretary - Indian Affairs for the U.S. Department of the Interior, through the Office of Indian Energy and Economic Development, is soliciting grant proposals from Indian tribes to build tribal capacity for energy resource development or management under the Department of the Interior's (DOl's) Tribal Energy Development Capacity (TEDC) grant program.

  6. Optimal Demand Response Capacity of Automatic Lighting Control

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    1 Optimal Demand Response Capacity of Automatic Lighting Control Seyed Ataollah Raziei and Hamed-mails: razieis1@udayton.edu and hamed@ee.ucr.edu Abstract--Demand response programs seek to ad- just the normal prior studies have extensively studied the capacity of offering demand response in buildings

  7. UMTS Capacity and Throughput Maximization for Different Spreading Factors

    E-Print Network [OSTI]

    Akl, Robert

    for signal-to-interference threshold from 5 dB to 10 dB and spreading factor values of 256, 64, 16, and 4 Erlang capacity based on the Lost Call Held (LCH) model as described in [4]. This algorithm calculates expression of Erlang capacity for a single type of traffic loading and compare analytical results

  8. ORIGINAL ARTICLE Effect of Different Sitting Postures on Lung Capacity,

    E-Print Network [OSTI]

    Makhsous, Mohsen

    ORIGINAL ARTICLE Effect of Different Sitting Postures on Lung Capacity, Expiratory Flow, and Lumbar, Makhsous M. Effect of different sitting postures on lung capacity, expiratory flow, and lumbar lordosis. Arch Phys Med Rehabil 2006;87:504-9. Objective: To investigate the effect of sitting posture on lung

  9. GROUNDWATER NITRATE REMOVAL CAPACITY OF RIPARIAN ZONES IN

    E-Print Network [OSTI]

    Gold, Art

    GROUNDWATER NITRATE REMOVAL CAPACITY OF RIPARIAN ZONES IN URBANIZING WATERSHEDS BY TARA KIMBERLY the watershed, however, is not well understood. Nitrate in groundwater moving through the "biologically active and geomorphology of riparian zones, potentially changing riparian groundwater denitrification capacity. Little work

  10. Maximum oxidative phosphorylation capacity of the mammalian heart

    E-Print Network [OSTI]

    Mootha, Vamsi K.

    Maximum oxidative phosphorylation capacity of the mammalian heart VAMSI K. MOOTHA, ANDREW E. ARAI, AND ROBERT S. BALABAN Laboratory of Cardiac Energetics, National Heart, Lung, and Blood Institute, National. Maximum oxidative phosphorylation capacity of the mammalian heart. Am. J. Physiol. 272 (Heart Circ

  11. Towards Optimal Capacity Segmentation with Hybrid Cloud Pricing

    E-Print Network [OSTI]

    Li, Baochun

    between periodic auctions and EC2 spot market. Furthermore, we formulate the optimal capacity segmentationTowards Optimal Capacity Segmentation with Hybrid Cloud Pricing Wei Wang, Baochun Li, and Ben Liang Department of Electrical and Computer Engineering University of Toronto Abstract--Cloud resources are usually

  12. Competitive Acquisition of Prioritizable Capacity-Based Ancillary Services

    E-Print Network [OSTI]

    the competitive procurement of capacity-based ancillary services (AS) in unbundled markets by the Independent Grid integrate the markets for ancillary services into the wholesale electricity market through the formulation1 Competitive Acquisition of Prioritizable Capacity-Based Ancillary Services Gianfranco Chicco

  13. Towards Optimal Capacity Segmentation with Hybrid Cloud Pricing

    E-Print Network [OSTI]

    Liang, Ben

    and EC2 spot market. Furthermore, we formulate the optimal capacity segmentation strategy as a MarkovTowards Optimal Capacity Segmentation with Hybrid Cloud Pricing Wei Wang, Baochun Li, and Ben Liang Department of Electrical and Computer Engineering University of Toronto Toronto, ON M5S 3G4, Canada weiwang

  14. Photoperiodic Regulation of the Seasonal Pattern of Photosynthetic Capacity and the Implications for Carbon Cycling

    SciTech Connect (OSTI)

    Bauerle, William L. [Colorado State University, Fort Collins; Oren, Ram [Duke University; Way, Danielle A. [Duke University; Qian, Song S. [Duke University; Stoy, Paul C. [Montana State University; Thornton, Peter E [ORNL; Bowden, Joseph D. [Colorado State University, Fort Collins; Hoffman, Forrest M [ORNL; Reynolds, Robert F. [Clemson University

    2012-01-01

    Although temperature is an important driver of seasonal changes in photosynthetic physiology, photoperiod also regulates leaf activity. Climate change will extend growing seasons if temperature cues predominate, but photoperiod-controlled species will show limited responsiveness to warming. We show that photoperiod explains more seasonal variation in photosynthetic activity across 23 tree species than temperature. Although leaves remain green, photosynthetic capacity peaks just after summer solstice and declines with decreasing photoperiod, before air temperatures peak. In support of these findings, saplings grown at constant temperature but exposed to an extended photoperiod maintained high photosynthetic capacity, but photosynthetic activity declined in saplings experiencing a naturally shortening photoperiod; leaves remained equally green in both treatments. Incorporating a photoperiodic correction of photosynthetic physiology into a global-scale terrestrial carbon-cycle model significantly improves predictions of seasonal atmospheric CO{sub 2} cycling, demonstrating the benefit of such a function in coupled climate system models. Accounting for photoperiod-induced seasonality in photosynthetic parameters reduces modeled global gross primary production 2.5% ({approx}4 PgC y{sup -1}), resulting in a >3% ({approx}2 PgC y{sup -1}) decrease of net primary production. Such a correction is also needed in models estimating current carbon uptake based on remotely sensed greenness. Photoperiod-associated declines in photosynthetic capacity could limit autumn carbon gain in forests, even if warming delays leaf senescence.

  15. Total Natural Gas Underground Storage Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0Proved Reserves (BillionProduction(MillionGrossJarrett2009 2010

  16. Total Natural Gas Underground Storage Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979 1.988Prices,Flight Paths30,2,8,Product: Total CrudeMay-15

  17. Total Natural Gas Underground Storage Capacity

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home PageMonthly","10/2015"4,"Ames5 Tables July 1996 Energy Information Administration Office of Coal, Nuclear,DecadeYearbyWithdrawalsHome6,672(MillionFeet)Product: Total

  18. Storage capacity in hot dry rock reservoirs

    DOE Patents [OSTI]

    Brown, Donald W. (Los Alamos, NM)

    1997-01-01

    A method of extracting thermal energy, in a cyclic manner, from geologic strata which may be termed hot dry rock. A reservoir comprised of hot fractured rock is established and water or other liquid is passed through the reservoir. The water is heated by the hot rock, recovered from the reservoir, cooled by extraction of heat by means of heat exchange apparatus on the surface, and then re-injected into the reservoir to be heated again. Water is added to the reservoir by means of an injection well and recovered from the reservoir by means of a production well. Water is continuously provided to the reservoir and continuously withdrawn from the reservoir at two different flow rates, a base rate and a peak rate. Increasing water flow from the base rate to the peak rate is accomplished by rapidly decreasing backpressure at the outlet of the production well in order to meet periodic needs for amounts of thermal energy greater than a baseload amount, such as to generate additional electric power to meet peak demands. The rate of flow of water provided to the hot dry rock reservoir is maintained at a value effective to prevent depletion of the liquid

  19. Storage capacity in hot dry rock reservoirs

    DOE Patents [OSTI]

    Brown, D.W.

    1997-11-11

    A method is described for extracting thermal energy, in a cyclic manner, from geologic strata which may be termed hot dry rock. A reservoir comprised of hot fractured rock is established and water or other liquid is passed through the reservoir. The water is heated by the hot rock, recovered from the reservoir, cooled by extraction of heat by means of heat exchange apparatus on the surface, and then re-injected into the reservoir to be heated again. Water is added to the reservoir by means of an injection well and recovered from the reservoir by means of a production well. Water is continuously provided to the reservoir and continuously withdrawn from the reservoir at two different flow rates, a base rate and a peak rate. Increasing water flow from the base rate to the peak rate is accomplished by rapidly decreasing backpressure at the outlet of the production well in order to meet periodic needs for amounts of thermal energy greater than a baseload amount, such as to generate additional electric power to meet peak demands. The rate of flow of water provided to the hot dry rock reservoir is maintained at a value effective to prevent depletion of the liquid inventory of the reservoir. 4 figs.

  20. An assessment of the effect on Olkiluoto repository capacity achievable with advanced fuel cycles

    SciTech Connect (OSTI)

    Juutilainen, P.; Viitanen, T.

    2013-07-01

    Previously a few scenarios have been simulated for transition from thermal to fast reactor fleet in Finland in order to determine how much the transuranic inventory could be reduced with the partitioning and transmutation (P-T) technologies. Those calculations, performed with COSI6 code developed by CEA, are extended in the present study, in which the effect of P-T on the capacity of the planned final disposal repository at Olkiluoto (Finland) is evaluated by taking into account the created fission products and transuranic residuals from the reprocessing operations. The decay heat is assumed to be the most restrictive factor in defining the waste disposal packing density. The repository capacity evaluation of this study is based on the comparison of the decay heats produced by the deposited waste in various scenarios. The reference scenario of this article involves only Light Water Reactors (LWR) in an open fuel cycle. The capacity requirement of the geological repository is estimated in a few closed fuel cycle scenarios, all including actinide transmutation with Fast Reactors (FR). The comparison between the P-T scenarios and reference is based on the decay heat production of the deposited waste. The COSI6 code is used for simulations to provide the repository decay heat curves. Applying the closed fuel cycle would change the disposal concept and schedule, because of which it is not quite straightforward to assess the impact of P-T on the capacity. However, it can be concluded that recycling the transuranic nuclides probably decreases the required volume for the disposal, but thermal dimensioning analysis is needed for more specific conclusions.

  1. Hydrogen Production Cost Estimate Using Biomass Gasification

    E-Print Network [OSTI]

    Hydrogen Production Cost Estimate Using Biomass Gasification National Renewable Energy Laboratory Panel, Hydrogen Production Cost Estimate Using Biomass Gasification To: Mr. Mark Ruth, NREL, DOE dollars. Costs for a pioneer plant [a 1st plant with a capacity of 500 dry ton per day (dtpd) biomass

  2. Dynamics of the Oil Transition: Modeling Capacity, Costs, and Emissions

    E-Print Network [OSTI]

    Brandt, Adam R.; Farrell, Alexander E.

    2008-01-01

    J. Regular conventional oil production to 2100 and resource10% of total US oil production in 2004, almost entirelysteam-induced heavy oil production in Cali- fornia [30].

  3. The multicast capacity region of large wireless networks

    E-Print Network [OSTI]

    Shah, Devavrat

    We study the problem of determining the multicast capacity region of a wireless network of n nodes randomly located in an extended area and communicating with each other over Gaussian fading channels. We obtain an explicit ...

  4. Offshore Wind Energy Market Installed Capacity is Anticipated...

    Open Energy Info (EERE)

    Offshore Wind Energy Market Installed Capacity is Anticipated to Reach 52,120.9 MW by 2022 Home > Groups > Renewable Energy RFPs Wayne31jan's picture Submitted by Wayne31jan(150)...

  5. Creative agencies : a model for building community capacity

    E-Print Network [OSTI]

    Ramaccia, Elizabeth M. (Elizabeth Marie)

    2011-01-01

    This research investigates how existing initiatives based in artistic and non-artistic disciplines build indigenous capacity for leadership in disenfranchised communities through the application of the creative process. ...

  6. Predictive capacity planning modeling with tactical and strategic applications

    E-Print Network [OSTI]

    Zeppieri, Michael A. (Michael Anthony), 1975-

    2004-01-01

    The focus of my internship was the development of a predictive capacity planning model to characterize the storage requirements and space utilization for Amazon's Campbellsville (SDF) Fulfillment Center (FC). Amazon currently ...

  7. Strategies for Sharing Bottleneck Capacity among Buses and Cars

    E-Print Network [OSTI]

    Guler, Sukran Ilgin

    2012-01-01

    enable buses to bypass the car queues that still form atcrease a bottleneck’s car-carrying capacity, in comparisonthat significant reductions in car delays can result while

  8. Fail Safe Design for Large Capacity Lithium-ion Batteries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fail Safe Design for Large Capacity Lithium-ion Batteries NREL Commercialization & Tech Transfer Webinar March 27, 2011 Gi-Heon Kim gi-heon.kim@nrel.gov John Ireland, Kyu-Jin Lee,...

  9. ,"U.S. Underground Natural Gas Storage Capacity"

    U.S. Energy Information Administration (EIA) Indexed Site

    012015 7:00:34 AM" "Back to Contents","Data 1: U.S. Underground Natural Gas Storage Capacity" "Sourcekey","N5290US2","NA1393NUS2","NA1392NUS2","NA1391NUS2","NGAEP...

  10. Nitrogen expander cycles for large capacity liquefaction of natural gas

    SciTech Connect (OSTI)

    Chang, Ho-Myung; Park, Jae Hoon; Gwak, Kyung Hyun; Choe, Kun Hyung

    2014-01-29

    Thermodynamic study is performed on nitrogen expander cycles for large capacity liquefaction of natural gas. In order to substantially increase the capacity, a Brayton refrigeration cycle with nitrogen expander was recently added to the cold end of the reputable propane pre-cooled mixed-refrigerant (C3-MR) process. Similar modifications with a nitrogen expander cycle are extensively investigated on a variety of cycle configurations. The existing and modified cycles are simulated with commercial process software (Aspen HYSYS) based on selected specifications. The results are compared in terms of thermodynamic efficiency, liquefaction capacity, and estimated size of heat exchangers. The combination of C3-MR with partial regeneration and pre-cooling of nitrogen expander cycle is recommended to have a great potential for high efficiency and large capacity.

  11. On the Capacity of Cognitive Relay assisted Gaussian Interference Channel

    E-Print Network [OSTI]

    Jafar, Syed A.

    On the Capacity of Cognitive Relay assisted Gaussian Interference Channel Sriram Sridharan, Sriram: srid- hara@ece.utexas.edu; sriram@ece.utexas.edu). S. Sridharan and S. Vish- wanath are supported

  12. On the Capacity of Vector Gaussian Interference Channels Sriram Vishwanath

    E-Print Network [OSTI]

    Jafar, Syed A.

    On the Capacity of Vector Gaussian Interference Channels Sriram Vishwanath Electrical and Computer Engineering Univ. of Texas at Austin, Austin, TX 78712 e-mail: sriram@ece.utexas.edu Syed Ali Jafar Electrical

  13. Table 2. Ten largest plants by generation capacity, 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    District of Columbia" ,"Plant","Primary energy source","Operating company","Net summer capacity (MW)" 1,"US GSA Heating and Transmission","Natural gas","US GSA Heating and...

  14. Capacity planning and change management in an aerospace overhaul cell

    E-Print Network [OSTI]

    Walker, David, M.B.A. Massachusetts Institute of Technology

    2013-01-01

    Purpose - This thesis analyzes the transformation of the Small Components Cell in Pratt & Whitney's aftermarket division through lean manufacturing techniques. The thesis focuses on use of a labor capacity planning model, ...

  15. Dynamics of social contagions with limited contact capacity

    E-Print Network [OSTI]

    Wang, Wei; Zhu, Yu-Xiao; Tang, Ming; Zhang, Yi-Cheng

    2015-01-01

    Individuals are always limited by some inelastic resources, such as time and energy, which restrict them to dedicate to social interaction and limit their contact capacity. Contact capacity plays an important role in dynamics of social contagions, which so far has eluded theoretical analysis. In this paper, we first propose a non-Markovian model to understand the effects of contact capacity on social contagions, in which each individual can only contact and transmit the information to a finite number of neighbors. We then develop a heterogeneous edge-based compartmental theory for this model, and a remarkable agreement with simulations is obtained. Through theory and simulations, we find that enlarging the contact capacity makes the network more fragile to behavior spreading. Interestingly, we find that both the continuous and discontinuous dependence of the final adoption size on the information transmission probability can arise. And there is a crossover phenomenon between the two types of dependence. More ...

  16. Prediction of Heat Capacities of Solid Inorganic Salts from Group

    Office of Scientific and Technical Information (OSTI)

    Prediction of Heat Capacities of Solid Inorganic Salts from Group Contributions. )&-SUB -- 7 5- g 7 A. T. M. Golam Mostafa, James M. Eakman* Department of Chemical Engineering New...

  17. High capacity stabilized complex hydrides for hydrogen storage

    DOE Patents [OSTI]

    Zidan, Ragaiy; Mohtadi, Rana F; Fewox, Christopher; Sivasubramanian, Premkumar

    2014-11-11

    Complex hydrides based on Al(BH.sub.4).sub.3 are stabilized by the presence of one or more additional metal elements or organic adducts to provide high capacity hydrogen storage material.

  18. Table 2. Ten Largest Plants by Generation Capacity, 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Vermont" ,"Plant","Primary energy source","Operating company","Net summer capacity (MW)" 1,"Vermont Yankee","Nuclear","Entergy Nuclear Vermont Yankee",619.4 2,"Kingdom Community...

  19. Real options approach to capacity planning under uncertainty

    E-Print Network [OSTI]

    Mittal, Geetanjali, 1979-

    2004-01-01

    This thesis highlights the effectiveness of Real Options Analysis (ROA) in capacity planning decisions for engineering projects subject to uncertainty. This is in contrast to the irreversible decision-making proposed by ...

  20. Creative capacity building in post-conflict Uganda

    E-Print Network [OSTI]

    Taha, Kofi A. (Kofi Abdul Malik)

    2011-01-01

    Creative Capacity Building (CCB) is a methodology that emphasizes the ability of people living in poverty to create livelihood technologies, i.e., machines and tools that increase income, improve health and safety, decrease ...

  1. Table 2. Ten Largest Plants by Generation Capacity, 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    California" ,"Plant","Primary energy source","Operating company","Net summer capacity (MW)" 1,"Dynegy Moss Landing Power Plant","Natural gas","Dynegy -Moss Landing LLC",2529...

  2. Capacity Requirements to Support Inter-Balancing Area Wind Delivery

    SciTech Connect (OSTI)

    Kirby, B.; Milligan, M.

    2009-07-01

    Paper examines the capacity requirements that arise as wind generation is integrated into the power system and how those requirements change depending on where the wind energy is delivered.

  3. Why Are We Talking About Capacity Markets? (Presentation)

    SciTech Connect (OSTI)

    Milligan, M.

    2011-06-01

    Capacity markets represent a new and novel way to achieve greater economic use of variable generation assets such as wind and solar, and this concept is discussed in this presentation.

  4. ,"U.S. Underground Natural Gas Storage Capacity"

    U.S. Energy Information Administration (EIA) Indexed Site

    012015 7:00:34 AM" "Back to Contents","Data 1: U.S. Underground Natural Gas Storage Capacity" "Sourcekey","N5290US2","NGAEPG0SACW0NUSMMCF","NA1394NUS8"...

  5. Quantum Mutual Information Capacity for High-Dimensional Entangled States

    E-Print Network [OSTI]

    Dixon, P. Ben

    High-dimensional Hilbert spaces used for quantum communication channels offer the possibility of large data transmission capabilities. We propose a method of characterizing the channel capacity of an entangled photonic ...

  6. Evaluating the impact of interventions on network capacity

    E-Print Network [OSTI]

    Rapolu, Sujith Reddy

    2010-01-01

    Analyzing the capacity impact of different diverse interventions on the network is essential in understanding the causes of congestion. In this thesis, a framework to understand the effects of different disruption events ...

  7. Biomass Power Generation Market Capacity is Estimated to Reach...

    Open Energy Info (EERE)

    Biomass Power Generation Market Capacity is Estimated to Reach 122,331.6 MW by 2022 Home > Groups > Renewable Energy RFPs Wayne31jan's picture Submitted by Wayne31jan(150)...

  8. SEISMIC CAPACITY OF THREADED, BRAZED AND GROOVED PIPE JOINTS

    Office of Energy Efficiency and Renewable Energy (EERE)

    Seismic Capacity of Threaded, Brazed and Grooved Pipe Joints Brent Gutierrez, PhD, PE George Antaki, PE, F.ASME DOE NPH Conference October 25-26, 2011

  9. High-Rate, High-Capacity Binder-Free Electrode

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that this process could be employed for any high-volume expansion material. * Volumetric capacity at 1C is 2000 mAhcm 3 (3 x graphite). Commercial Fe 3 O 4 material works...

  10. Development of operations based long range network capacity planning models

    E-Print Network [OSTI]

    Wilson, Cynthia M. (Cynthia Marie)

    2011-01-01

    Planning for vaccines manufacturing capacity is both a complex task requiring many inputs and an important function of manufacturers to ensure the supply of vaccines that prevent life-threatening illnesses. This thesis ...

  11. Flood control reservoir operations for conditions of limited storage capacity 

    E-Print Network [OSTI]

    Rivera Ramirez, Hector David

    2005-02-17

    -1 FLOOD CONTROL RESERVOIR OPERATIONS FOR CONDITIONS OF LIMITED STORAGE CAPACITY A Dissertation by HECTOR DAVID RIVERA RAMIREZ Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of DOCTOR OF PHILOSOPHY December 2004 Major Subject: Civil Engineering FLOOD CONTROL RESERVOIR OPERATIONS FOR CONDITIONS OF LIMITED STORAGE CAPACITY A Dissertation by HECTOR DAVID RIVERA...

  12. Capacity with energy constraint in coherent state channel

    E-Print Network [OSTI]

    Masahito Hayashi

    2009-04-02

    We consider two kind of energy constraints when the output state is a coherent state. One is a constraint on the total energy during a fixed period; the other is a constraint on the total energy for a single code. The first setting can be easily dealt with by using the conventional capacity formula. The second setting requires the general capacity formula for a classical-quantum channel.

  13. Classical capacity of Gaussian communication under a single noisy channel

    E-Print Network [OSTI]

    Jaehak Lee; Se-Wan Ji; Jiyong Park; Hyunchul Nha

    2015-05-06

    A long-standing problem on the classical capacity of bosonic Gaussian channels has recently been resolved by proving the minimum output entropy conjecture. It is also known that the ultimate capacity quantified by the Holevo bound can be achieved asymptotically by using an infinite number of channels. However, it is less understood to what extent the communication capacity can be reached if one uses a finite number of channels, which is a topic of practical importance. In this paper, we study the capacity of Gaussian communication, i.e., employing Gaussian states and Gaussian measurements to encode and decode information under a single-channel use. We prove that the optimal capacity of single-channel Gaussian communication is achieved by one of two well-known protocols, i.e., coherent-state communication or squeezed-state communication, depending on the energy (number of photons) as well as the characteristics of the channel. Our result suggests that the coherent-state scheme known to achieve the ultimate information-theoretic capacity is not a practically optimal scheme for the case of using a finite number of channels. We find that overall the squeezed-state communication is optimal in a small-photon-number regime whereas the coherent-state communication performs better in a large-photon-number regime.

  14. Water holding capacities of fly ashes: Effect of size fractionation

    SciTech Connect (OSTI)

    Sarkar, A.; Rano, R.

    2007-07-01

    Water holding capacities of fly ashes from different thermal power plants in Eastern India have been compared. Moreover, the effect of size fractionation (sieving) on the water holding capacities has also been determined. The desorption rate of water held by the fly ash fractions at ambient temperature (25-30{sup o}C) has been investigated. The effect of mixing various size fractions of fly ash in increasing the water holding capacities of fly ash has been studied. It is observed that the fly ash obtained from a thermal power plant working on stoker-fired combustor has the highest water holding capacity, followed by the one that works on pulverized fuel combustor. Fly ash collected from super thermal power plant has the least water holding capacity (40.7%). The coarser size fractions of fly ashes in general have higher water holding capacities than the finer ones. An attempt has been made to correlate the results obtained, with the potential use in agriculture.

  15. Pottery Production

    E-Print Network [OSTI]

    Nicholson, Paul T.

    2009-01-01

    Paul T. Nicholson. ) Pottery Production, Nicholson, UEE 2009Short Citation: Nicholson 2009, Pottery Production. UEE.Paul T. , 2009, Pottery Production. In Willeke Wendrich (

  16. Cordage Production

    E-Print Network [OSTI]

    Veldmeijer, André J.

    2009-01-01

    294: fig. 15-3). Cordage Production, Veldmeijer, UEE 2009Short Citation: Veldmeijer, 2009, Cordage Production. UEE.André J. , 2009, Cordage Production. In Willeke Wendrich (

  17. Glass Production

    E-Print Network [OSTI]

    Shortland, Andrew

    2009-01-01

    40, pp. 162 - 186. Glass Production, Shortland, UEE 2009AINES Short Citation: Shortland 2009, Glass Production. UEE.Andrew, 2009, Glass Production. In Willeke Wendrich (ed. ),

  18. Investigation of the carbon dioxide sorption capacity and structural deformation of coal

    SciTech Connect (OSTI)

    Hur, Tae-Bong; Fazio, James; Romanov, Vyacheslav; Harbert, William

    2010-01-01

    Due to increasing atmospheric CO2 concentrations causing the global energy and environmental crises, geological sequestration of carbon dioxide is now being actively considered as an attractive option to mitigate greenhouse gas emissions. One of the important strategies is to use deep unminable coal seams, for those generally contain significant quantities of coal bed methane that can be recovered by CO2 injection through enhanced coal bed natural gas production, as a method to safely store CO2. It has been well known that the adsorbing CO2 molecules introduce structural deformation, such as distortion, shrinkage, or swelling, of the adsorbent of coal organic matrix. The accurate investigations of CO2 sorption capacity as well as of adsorption behavior need to be performed under the conditions that coals deform. The U.S. Department of Energy-National Energy Technology Laboratory and Regional University Alliance are conducting carbon dioxide sorption isotherm experiments by using manometric analysis method for estimation of CO2 sorption capacity of various coal samples and are constructing a gravimetric apparatus which has a visual window cell. The gravimetric apparatus improves the accuracy of carbon dioxide sorption capacity and provides feasibility for the observation of structural deformation of coal sample while carbon dioxide molecules interact with coal organic matrix. The CO2 sorption isotherm measurements have been conducted for moist and dried samples of the Central Appalachian Basin (Russell County, VA) coal seam, received from the SECARB partnership, at the temperature of 55 C.

  19. Relative Economic Merits of Storage and Combustion Turbines for Meeting Peak Capacity Requirements under Increased Penetration of Solar Photovoltaics

    SciTech Connect (OSTI)

    Denholm, Paul; Diakov, Victor; Margolis, Robert

    2015-09-01

    Batteries with several hours of capacity provide an alternative to combustion turbines for meeting peak capacity requirements. Even when compared to state-of-the-art highly flexible combustion turbines, batteries can provide a greater operational value, which is reflected in a lower system-wide production cost. By shifting load and providing operating reserves, batteries can reduce the cost of operating the power system to a traditional electric utility. This added value means that, depending on battery life, batteries can have a higher cost than a combustion turbine of equal capacity and still produce a system with equal or lower overall life-cycle cost. For a utility considering investing in new capacity, the cost premium for batteries is highly sensitive to a variety of factors, including lifetime, natural gas costs, PV penetration, and grid generation mix. In addition, as PV penetration increases, the net electricity demand profile changes, which may reduce the amount of battery energy capacity needed to reliably meet peak demand.

  20. The Availability and Price of Petroleum and Petroleum Products...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    growth in global supply, contributing 0.8 million bbld (Table 2). * Global surplus crude oil production capacity averaged 2.2 million bbld in November and December, 0.1 million...

  1. The Availability and Price of Petroleum and Petroleum Products...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    lower crude oil output from OPEC countries (Tables 2 and 3). * Global surplus crude oil production capacity averaged 1.8 million bbld in July and August, 0.3 million bbld...

  2. The Availability and Price of Petroleum and Petroleum Products...

    Gasoline and Diesel Fuel Update (EIA)

    was more than offset by the decrease in total OPEC output (Table 4). Global surplus crude oil production capacity in September and October 2013 averaged 1.8 million bbld, which...

  3. The Availability and Price of Petroleum and Petroleum Products...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    over year-ago levels and the three-year average (Table 2). * Global surplus crude oil production capacity in July and August 2013 averaged 2.2 million bbld, which is 0.3...

  4. Modeling and Optimization of a Bioethanol Production Facility 

    E-Print Network [OSTI]

    Gabriel, Kerron Jude

    2011-10-21

    The primary objective of this work is to identify the optimal bioethanol production plant capacity and configuration based on currently available technology for all the processing sections involved. To effect this study, a systematic method...

  5. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a...

  6. Tractable multi-product pricing under discrete choice models

    E-Print Network [OSTI]

    Keller, Philipp W. (Philipp Wilhelm), 1982-

    2013-01-01

    We consider a retailer offering an assortment of differentiated substitutable products to price-sensitive customers. Prices are chosen to maximize profit, subject to inventory/ capacity constraints, as well as more general ...

  7. The Availability and Price of Petroleum and Petroleum Products...

    Gasoline and Diesel Fuel Update (EIA)

    5 percent of global supply - and the third-largest exporter of crude oil. Iran's crude oil production capacity has eroded in recent years, due to its inability to carry out...

  8. The Availability and Price of Petroleum and Petroleum Products...

    Gasoline and Diesel Fuel Update (EIA)

    Iran were 3.3 million bbld and 1.7 million bbld, respectively (Table 1). Iran's crude oil production capacity has eroded in recent years, due to its inability to carry out...

  9. Fast concurrent array-based stacks, queues and deques using fetch-and-increment-bounded, fetch-and-decrement-bounded and store-on-twin synchronization primitives

    DOE Patents [OSTI]

    Chen, Dong; Gara, Alana; Heidelberger, Philip; Kumar, Sameer; Ohmacht, Martin; Steinmacher-Burow, Burkhard; Wisniewski, Robert

    2014-09-16

    Implementation primitives for concurrent array-based stacks, queues, double-ended queues (deques) and wrapped deques are provided. In one aspect, each element of the stack, queue, deque or wrapped deque data structure has its own ticket lock, allowing multiple threads to concurrently use multiple elements of the data structure and thus achieving high performance. In another aspect, new synchronization primitives FetchAndIncrementBounded (Counter, Bound) and FetchAndDecrementBounded (Counter, Bound) are implemented. These primitives can be implemented in hardware and thus promise a very fast throughput for queues, stacks and double-ended queues.

  10. An Approximate Dynamic Programming Approach for a Product Distribution Problem

    E-Print Network [OSTI]

    Topaloglu, Huseyin

    of a company manufacturing a certain product in numerous plants and distributing it to different regional with geographically distributed manufacturing facilities requires careful coordination. While planning the delivery, the forecasts of customer demands, the production capacities and the forecasts of future production quantities

  11. Complex Hydride Compounds with Enhanced Hydrogen Storage Capacity

    SciTech Connect (OSTI)

    Mosher, Daniel A.; Opalka, Susanne M.; Tang, Xia; Laube, Bruce L.; Brown, Ronald J.; Vanderspurt, Thomas H.; Arsenault, Sarah; Wu, Robert; Strickler, Jamie; Anton, Donald L.; Zidan, Ragaiy; Berseth, Polly

    2008-02-18

    The United Technologies Research Center (UTRC), in collaboration with major partners Albemarle Corporation (Albemarle) and the Savannah River National Laboratory (SRNL), conducted research to discover new hydride materials for the storage of hydrogen having on-board reversibility and a target gravimetric capacity of ? 7.5 weight percent (wt %). When integrated into a system with a reasonable efficiency of 60% (mass of hydride / total mass), this target material would produce a system gravimetric capacity of ? 4.5 wt %, consistent with the DOE 2007 target. The approach established for the project combined first principles modeling (FPM - UTRC) with multiple synthesis methods: Solid State Processing (SSP - UTRC), Solution Based Processing (SBP - Albemarle) and Molten State Processing (MSP - SRNL). In the search for novel compounds, each of these methods has advantages and disadvantages; by combining them, the potential for success was increased. During the project, UTRC refined its FPM framework which includes ground state (0 Kelvin) structural determinations, elevated temperature thermodynamic predictions and thermodynamic / phase diagram calculations. This modeling was used both to precede synthesis in a virtual search for new compounds and after initial synthesis to examine reaction details and options for modifications including co-reactant additions. The SSP synthesis method involved high energy ball milling which was simple, efficient for small batches and has proven effective for other storage material compositions. The SBP method produced very homogeneous chemical reactions, some of which cannot be performed via solid state routes, and would be the preferred approach for large scale production. The MSP technique is similar to the SSP method, but involves higher temperature and hydrogen pressure conditions to achieve greater species mobility. During the initial phases of the project, the focus was on higher order alanate complexes in the phase space between alkaline metal hydrides (AmH), Alkaline earth metal hydrides (AeH2), alane (AlH3), transition metal (Tm) hydrides (TmHz, where z=1-3) and molecular hydrogen (H2). The effort started first with variations of known alanates and subsequently extended the search to unknown compounds. In this stage, the FPM techniques were developed and validated on known alanate materials such as NaAlH4 and Na2LiAlH6. The coupled predictive methodologies were used to survey over 200 proposed phases in six quaternary spaces, formed from various combinations of Na, Li Mg and/or Ti with Al and H. A wide range of alanate compounds was examined using SSP having additions of Ti, Cr, Co, Ni and Fe. A number of compositions and reaction paths were identified having H weight fractions up to 5.6 wt %, but none meeting the 7.5 wt%H reversible goal. Similarly, MSP of alanates produced a number of interesting compounds and general conclusions regarding reaction behavior of mixtures during processing, but no alanate based candidates meeting the 7.5 wt% goal. A novel alanate, LiMg(AlH4)3, was synthesized using SBP that demonstrated a 7.0 wt% capacity with a desorption temperature of 150°C. The deuteride form was synthesized and characterized by the Institute for Energy (IFE) in Norway to determine its crystalline structure for related FPM studies. However, the reaction exhibited exothermicity and therefore was not reversible under acceptable hydrogen gas pressures for on-board recharging. After the extensive studies of alanates, the material class of emphasis was shifted to borohydrides. Through SBP, several ligand-stabilized Mg(BH4)2 complexes were synthesized. The Mg(BH4)2*2NH3 complex was found to change behavior with slightly different synthesis conditions and/or aging. One of the two mechanisms was an amine-borane (NH3BH3) like dissociation reaction which released up to 16 wt %H and more conservatively 9 wt%H when not including H2 released from the NH3. From FPM, the stability of the Mg(BH4)2*2NH3 compound was found to increase with the inclusion of NH3 groups in the inner-Mg coordination

  12. March 25 Webinar to Focus on Building Tribal Capacity to Deploy...

    Energy Savers [EERE]

    Webinar to Focus on Building Tribal Capacity to Deploy Strategic Energy Plans and Guide Project Development Decisions March 25 Webinar to Focus on Building Tribal Capacity to...

  13. LG to DOE General Counsel; Re:Request for Comment on Large Capacity...

    Energy Savers [EERE]

    Capacity Clothes Washers LG response to DOE's request for information regarding alternative test procedures for large-capacity clothes washer models, December 7, 2010. After...

  14. Plug and Process Loads Capacity and Power Requirements Analysis

    SciTech Connect (OSTI)

    Sheppy, M.; Gentile-Polese, L.

    2014-09-01

    This report addresses gaps in actionable knowledge that would help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. Limited initial data, however, suggest that actual PPL densities in leased buildings are substantially lower. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems. Better guidance will enable improved sizing and design of these systems, decrease upfront capital costs, and allow systems to operate more energy efficiently. The main focus of this report is to provide industry with reliable, objective third-party guidance to address the information gap in typical PPL densities for commercial building tenants. This could drive changes in negotiations about PPL energy demands.

  15. Optimal Encoding Capacity of a Linear Optical Quantum Channel

    E-Print Network [OSTI]

    Jake A. Smith; Dmitry B. Uskov; Lev Kaplan

    2015-08-10

    Here, we study the capacity of a quantum channel, assuming linear optical encoding, as a function of available photons and optical modes. First, we observe that substantial improvement is made possible by not restricting ourselves to a rail-encoded qubit basis. Then, we derive an analytic formula for general channel capacity and show that this capacity is achieved without requiring the use of entangling operations typically required for scalable universal quantum computation, e.g. KLM measurement-assisted transformations. As an example, we provide an explicit encoding scheme using the resources required of standard dense coding using two dual-rail qubits (2 photons in 4 modes). In this case, our protocol encodes one additional bit of information. Greater gains are expected for larger systems.

  16. Bounds on the outage-constrained capacity region of space-division multiple-access radio systems

    E-Print Network [OSTI]

    Jin, Haipeng; Acampora, A

    2004-01-01

    Broadcast Channels - Part I: Outage Capacity,” IEEE Trans.Bounds on the Outage-Constrained Capacity Region of Spacethe capacity limit as an outage region rates contained

  17. Method of increasing the sulfation capacity of alkaline earth sorbents

    DOE Patents [OSTI]

    Shearer, J.A.; Turner, C.B.; Johnson, I.

    1980-03-13

    A system and method for increasing the sulfation capacity of alkaline earth carbonates to scrub sulfur dioxide produced during the fluidized bed combustion of coal in which partially sulfated alkaline earth carbonates are hydrated in a fluidized bed to crack the sulfate coating and convert the alkaline earth oxide to the hydroxide. Subsequent dehydration of the sulfate-hydroxide to a sulfate-oxide particle produces particles having larger pore size, increased porosity, decreased grain size and additional sulfation capacity. A continuous process is disclosed.

  18. Capacity Proportional Unstructured Peer-to-Peer Networks 

    E-Print Network [OSTI]

    Reddy, Chandan Rama

    2010-10-12

    stream_source_info REDDY-THESIS.pdf.txt stream_content_type text/plain stream_size 69931 Content-Encoding ISO-8859-1 stream_name REDDY-THESIS.pdf.txt Content-Type text/plain; charset=ISO-8859-1 CAPACITY-PROPORTIONAL... CAPACITY-PROPORTIONAL UNSTRUCTURED PEER-TO-PEER NETWORKS A Thesis by CHANDAN RAMA REDDY Submitted to the O?ce of Graduate Studies of Texas A&M University in partial fulflllment of the requirements for the degree of MASTER OF SCIENCE Approved by: Chair...

  19. World nuclear capacity and fuel cycle requirements, November 1993

    SciTech Connect (OSTI)

    Not Available

    1993-11-30

    This analysis report presents the current status and projections of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. Long-term projections of US nuclear capacity, generation, fuel cycle requirements, and spent fuel discharges for three different scenarios through 2030 are provided in support of the Department of Energy`s activities pertaining to the Nuclear Waste Policy Act of 1982 (as amended in 1987). The projections of uranium requirements also support the Energy Information Administration`s annual report, Domestic Uranium Mining and Milling Industry: Viability Assessment.

  20. On the Throughput Capacity of Heterogeneous Wireless Networks

    E-Print Network [OSTI]

    Latchman, Haniph A.

    On the Throughput Capacity of Heterogeneous Wireless Networks Pan Li, Member, IEEE, and Yuguang of wireless networks. However, it is commonly assumed that all nodes in the network are identical. The issue of heterogeneous wireless networks with general network settings. Specifically, we consider an extended network

  1. Predicting Operator Capacity for Supervisory Control of Multiple UAVs

    E-Print Network [OSTI]

    Cummings, Mary "Missy"

    Predicting Operator Capacity for Supervisory Control of Multiple UAVs M.L. Cummings, C. E. Nehme, J, uninhabited (also known as unmanned) ae- rial vehicles (UAVs) have become indispensable assets to militarized forces. UAVs require human guidance to varying degrees and often through several operators. However

  2. : Measurement of Battery Capacity in Mobile Robot Systems

    E-Print Network [OSTI]

    Breu, Ruth

    . These enhancements pose demanding operation conditions on the battery, emphasizing the importance of this com- ponentRoBM2 : Measurement of Battery Capacity in Mobile Robot Systems Nestor Lucas1 , Cosmin Codrea1. With battery driven robot systems performing very sophisti- cated tasks, increasing demands on the power supply

  3. Solar Photovoltaic Capacity F t P f d P li

    E-Print Network [OSTI]

    6/19/2013 1 Solar Photovoltaic ­ Capacity F t P f d P li Generating Resources Advisory Committee Advisor Model (SAM), version 2013.1.15 Technology: Solar PV (PVWatts system model)Technology: Solar PV (MWh) (First year output, each year thereafter degrades 0.5%) 6 #12;6/19/2013 4 Shape of PNW Solar PV

  4. Achievable Transmission Capacity of Cognitive Radio Networks with Cooperative Relaying

    E-Print Network [OSTI]

    Cheng, Xiuzhen "Susan"

    Achievable Transmission Capacity of Cognitive Radio Networks with Cooperative Relaying Xiuying Chen, Washington DC, USA 3VTT - Technical Research Centre of Finland, Kaitov¨ayl¨a 1, Oulu, Finland {10120069,tjing that secondary users can only work under a low transmission power condition in an underlay spectrum sharing model

  5. Capacity planning in a transitional economy: What issues? Which models?

    SciTech Connect (OSTI)

    Mubayi, V.; Leigh, R.W.; Bright, R.N.

    1996-03-01

    This paper is devoted to an exploration of the important issues facing the Russian power generation system and its evolution in the foreseeable future and the kinds of modeling approaches that capture those issues. These issues include, for example, (1) trade-offs between investments in upgrading and refurbishment of existing thermal (fossil-fired) capacity and safety enhancements in existing nuclear capacity versus investment in new capacity, (2) trade-offs between investment in completing unfinished (under construction) projects based on their original design versus investment in new capacity with improved design, (3) incorporation of demand-side management options (investments in enhancing end-use efficiency, for example) within the planning framework, (4) consideration of the spatial dimensions of system planning including investments in upgrading electric transmission networks or fuel shipment networks and incorporating hydroelectric generation, (5) incorporation of environmental constraints and (6) assessment of uncertainty and evaluation of downside risk. Models for exploring these issues include low power shutdown (LPS) which are computationally very efficient, though approximate, and can be used to perform extensive sensitivity analyses to more complex models which can provide more detailed answers but are computationally cumbersome and can only deal with limited issues. The paper discusses which models can usefully treat a wide range of issues within the priorities facing decision makers in the Russian power sector and integrate the results with investment decisions in the wider economy.

  6. Capacities and Research in Homeland Security The University at Buffalo

    E-Print Network [OSTI]

    Krovi, Venkat

    , and Biophotonics (ILPB) and the Center for Spin Effects and Quantum Information in Nanostructures (CSEQuIN) conduct multidisciplinary science and technology programs focusing on the development of: (1) high capacity data storage devices for "smart sensor" systems to detect biological and chemical agents. These research directions

  7. Wireless Network Capacity Management: A Real Options Approach

    E-Print Network [OSTI]

    Forsyth, Peter A.

    Wireless Network Capacity Management: A Real Options Approach Y. d'Halluin , P.A. Forsyth , and K factor algorithm is developed, based on a real options formulation. Numerical examples are provided to illustrate various aspects of the model. Keywords: real options, optimal network planning decisions, network

  8. High Capacity Graphite Anodes for Li-Ion battery applications

    E-Print Network [OSTI]

    Popov, Branko N.

    High Capacity Graphite Anodes for Li-Ion battery applications using Tin microencapsulation Basker range 1.6V to 0.01V at 0.05 mV/s Physical characterization SEM, EDAX and XRD #12;SEM images of Bare

  9. Zero Capacity Region of Multidimensional Run Length Constraints

    E-Print Network [OSTI]

    Zeger, Kenneth

    there are at least consecutive zeros. An -dimensional pattern of zeros and ones arranged in an hyper For integers and satisfying , a binary sequence is said to satisfy a one-dimensional run length constraint. For , the -dimensional -constrained capacity is defined as where denotes the number of -dimensional binary rectangular

  10. HUD Community Compass Technical Assistance and Capacity Building Program

    Broader source: Energy.gov [DOE]

    The U.S. Department of Housing and Urban Development (HUD) is accepting applications for approximately $44.9 million for Community Compass, HUD's integrated technical assistance and capacity building initiative. The goal of the initiative is to equip HUD's customers with tools, skills, and knowledge to ensure effective program delivery and efficient stewardship of federal funds.

  11. High capacity nickel battery material doped with alkali metal cations

    DOE Patents [OSTI]

    Jackovitz, John F. (Monroeville, PA); Pantier, Earl A. (Penn Hills, PA)

    1982-05-18

    A high capacity battery material is made, consisting essentially of hydrated Ni(II) hydroxide, and about 5 wt. % to about 40 wt. % of Ni(IV) hydrated oxide interlayer doped with alkali metal cations selected from potassium, sodium and lithium cations.

  12. DHC: a diurnal heat capacity program for microcomputers

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1985-01-01

    A computer program has been developed that can predict the temperature swing in direct gain passive solar buildings. The diurnal heat capacity (DHC) program calculates the DHC for any combination of homogeneous or layered surfaces using closed-form harmonic solutions to the heat diffusion equation. The theory is described, a Basic program listing is provided, and an example solution printout is given.

  13. Information Capacity of an Energy Harvesting Sensor Node

    E-Print Network [OSTI]

    Viswanath, Pramod

    to electrical energy. Common energy harvesting devices are solar cells, wind turbines and piezo-electric cellsInformation Capacity of an Energy Harvesting Sensor Node R Rajesh, Vinod Sharma and Pramod Viswanath Abstract Energy harvesting sensor nodes are gaining popularity due to their ability to improve

  14. CACM:Current-aware Capacity Management in Consolidated Server Enclosures

    E-Print Network [OSTI]

    Gavrilovska, Ada

    to this study, we suggest the need for `location-aware' methods for load placement and migration. This paperCACM:Current-aware Capacity Management in Consolidated Server Enclosures Hui Chen, Meina Song in electrical current levels across these two domains. This paper describes experiments designed to validate

  15. MFR PAPER 1323 Estimating the Structure of Capacity

    E-Print Network [OSTI]

    MFR PAPER 1323 Estimating the Structure of Capacity Utilization in the Fishing Industry KENNETH and to look at certain types of industry behavior that have been relatively ne- glected. This paper discusses BALLARD and VITO BLOMO INTRODUCTION Research in industrial market struc- ture has usually included

  16. SWING: Traffic Capacity of a Simple WDM Ring Network

    E-Print Network [OSTI]

    Bonald, Thomas

    , Charlotte Roger Orange Labs, France Telecom, France Abstract-- The paper presents a novel MAC protocol. INTRODUCTION There is renewed and growing interest in exploiting the high capacity and energy efficiency result is to prove that a simple greedy opportunistic access policy, while unfair, is perfectly efficient

  17. Analysis of the effect of packing capacity on pork prices 

    E-Print Network [OSTI]

    Spivey, Sarah Elizabeth

    2013-02-22

    In 1998, pork prices fell to an all time low. Across the industry, concern was expressed for research as to what led to this price crash. Capacity constraints at the packer level have been a key area of concern. This study is an analysis...

  18. FISHWAY CAPACITY EXPERIMENT, 1956 iMarine Biological Laboratory!

    E-Print Network [OSTI]

    11 Observations List of capacity tests 11 Effect of changing hydraulics on fish passage 12 over the high costs of fishways and fish protection devices at dams and water diversion projects. As an example, the fish passage facilities at The Dalles Dam, completed in 1957, cost in excess of 18 million

  19. Spent nuclear fuel project design basis capacity study

    SciTech Connect (OSTI)

    Cleveland, K.J.

    1996-09-09

    A parametric study of the Spent Nuclear Fuel Project system capacity is presented. The study was completed using a commercially available software package to develop a summary level model of the major project systems. Alternative configurations, sub-system cycle times, and operating scenarios were tested to identify their impact on total project duration and equipment requirements.

  20. Assessing the Control Systems Capacity for Demand Response in

    E-Print Network [OSTI]

    LBNL-5319E Assessing the Control Systems Capacity for Demand Response in California Industries in this report was coordinated by the Demand Response Research Center and funded by the California Energy of the Demand Response Research Center Industrial Controls Experts Working Group: · Jim Filanc, Southern

  1. Table 4. Biodiesel producers and production capacity by state, October 2015

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price to fall to $3.43U.S. Coke515 2.494 2.484Biodiesel producers and

  2. Modeling the tradeoff between inventory and capacity to optimize return on assets in production scheduling

    E-Print Network [OSTI]

    Wu, Cindy (Cindy Hsin-ying)

    2013-01-01

    In the agrochemical industry, companies are challenged with an extreme seasonality in demand driven by the crops' growing cycles. Therefore, balancing supply with such fluctuating demand has been a struggle for most companies ...

  3. "Table A7. Shell Storage Capacity of Selected Petroleum Products by Census"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page|Monthly","10/2015","1/15/1981"0. Total Consumption of LPG, Distillate6. Total1. SelectedShell

  4. ,"U.S. Production Capacity of Operable Petroleum Refineries"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home PageMonthly","10/2015"4,"Ames City of",6,1,"Omaha Public PowerOECD/IEA -Annual",2014Proved Reserves, Wet After LeaseAnnual",2014Value andGas, Wet

  5. EIA Energy Efficiency-Table 3c. Capacity Adjusted Value of Production a by

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)DecadeYear Jan Feb Mar Apr May Jun Jul1998, and 2002 b Page

  6. EIA Energy Efficiency-Table 4c. Capacity Adjusted Value of Production a by

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)DecadeYear Jan Feb Mar Apr May Jun Jul1998, and 2002 b Pageand

  7. Natural Gas Productive Capacity for the Lower-48 States 1985 - 2003

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home PageMonthly","10/2015"4,"Ames5 Tables July 1996 Energy Information Administration Office of Coal, Nuclear,Decade Year-03.823,172 3,009 2,8515,674,120Market

  8. Capacity expansion planning of alternative resources Formulation of a new mechanism to

    E-Print Network [OSTI]

    McCalley, James D.

    Capacity expansion planning of alternative resources ­ Formulation of a new mechanism to procure · Gap between net revenues produced by energy markets and the capital costs of investing in new capacity GENERATING CAPACITY, MIT 2006 . FTI Consulting, "Evaluation of the New York Capacity Market", March 2013

  9. Capacity Region, Minimum Energy and Delay for a Mobile Ad-Hoc Network

    E-Print Network [OSTI]

    Chen, Yuanzhu Peter

    Capacity Region, Minimum Energy and Delay for a Mobile Ad-Hoc Network Rahul Urgaonkar, Michael J in a mobile ad-hoc network: the capacity region and the minimum energy function of the network. The capacity limits of a mobile ad-hoc network are the capacity region and the minimum energy function of the network

  10. On the Capacity Region of the Gaussian MAC with Batteryless Energy Harvesting Transmitters

    E-Print Network [OSTI]

    Ulukus, Sennur

    On the Capacity Region of the Gaussian MAC with Batteryless Energy Harvesting Transmitters Omur-user channel capacity with an energy harvesting transmitter of an unlimited battery is equal to the capacity work in [3] and address the capacity region of the Gaussian MAC with batteryless energy harvesting

  11. MSE 3050, Phase Diagrams and Kinetics, Leonid Zhigilei Theoretical calculation of the heat capacity

    E-Print Network [OSTI]

    Zhigilei, Leonid V.

    Principle of equipartition of energy Heat capacity of ideal and real gases Heat capacity of solids: Dulong and internal energy of 3/2kBT. The molar internal energy U=3/2NAkBT=3/2RT and the molar heat capacity under to the heat capacity can be considered classically only if En ~ h Energy leve

  12. Computing Protection Level Policies for Dynamic Capacity Allocation Problems by Using Stochastic Approximation Methods

    E-Print Network [OSTI]

    Topaloglu, Huseyin

    function. However, this approach brings unique challenges in the context of the capacity allocation problemComputing Protection Level Policies for Dynamic Capacity Allocation Problems by Using Stochastic capacity allocation problem. We have a fixed amount of daily processing capacity. Jobs of different

  13. Hydropower Advancement Project (HAP): Audits and Feasibility Studies for Capacity and Efficiency Upgrades

    Office of Energy Efficiency and Renewable Energy (EERE)

    Hydropower Advancement Project (HAP): Audits and Feasibility Studies for Capacity and Efficiency Upgrades

  14. Testing of Supercapacitors: Capacitance, Resistance, and Energy Energy and Power Capacity

    E-Print Network [OSTI]

    Burke, Andrew

    2009-01-01

    and Energy Energy and Power Capacity Andrew Burke Institute of Transportation Studies University of California-

  15. On the Capacity Limits of Advanced Channel Reservation Architectures

    E-Print Network [OSTI]

    Cohen, Reuven

    critical applications such as bioenergy production or microbial carbon recycling [1]. GTL studies relies

  16. int. j. prod. res., 01 June 2004, vol. 42, no. 11, 21972206 Strategic capacity planning in supply chain design for a new market

    E-Print Network [OSTI]

    Nagi, Rakesh

    chain design for a new market opportunity SATYAVEER S. CHAUHANy, RAKESH NAGIz and JEAN-MARIE PROTHy, capacity planning, transportation network design, identification of distributors in the potential market* This paper addresses the problem of supply chain design at the strategic level when production

  17. "Period","Annual Production Capacity",,"Monthly B100 Production"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEtGeorgia:Illinois:WizardYatescloudDataAge Refining Air

  18. Carbon Dioxide Sealing Capacity: Textural or Compositional Controls?

    SciTech Connect (OSTI)

    Cranganu, Constantin; Soleymani, Hamidreza; Sadiqua, Soleymani; Watson, Kieva

    2013-11-30

    This research project is aiming to assess the carbon dioxide sealing capacity of most common seal-rocks, such as shales and non-fractured limestones, by analyzing the role of textural and compositional parameters of those rocks. We hypothesize that sealing capacity is controlled by textural and/or compositional pa-rameters of caprocks. In this research, we seek to evaluate the importance of textural and compositional parameters affecting the sealing capacity of caprocks. The conceptu-al framework involves two testable end-member hypotheses concerning the sealing ca-pacity of carbon dioxide reservoir caprocks. Better understanding of the elements controlling sealing quality will advance our knowledge regarding the sealing capacity of shales and carbonates. Due to relatively low permeability, shale and non-fractured carbonate units are considered relatively imper-meable formations which can retard reservoir fluid flow by forming high capillary pres-sure. Similarly, these unites can constitute reliable seals for carbon dioxide capture and sequestration purposes. This project is a part of the comprehensive project with the final aim of studying the caprock sealing properties and the relationship between microscopic and macroscopic characteristics of seal rocks in depleted gas fields of Oklahoma Pan-handle. Through this study we examined various seal rock characteristics to infer about their respective effects on sealing capacity in special case of replacing reservoir fluid with super critical carbon dioxide (scCO{sub 2}). To assess the effect of textural and compositional properties on scCO{sub 2} maximum reten-tion column height we collected 30 representative core samples in caprock formations in three counties (Cimarron, Texas, Beaver) in Oklahoma Panhandle. Core samples were collected from various seal formations (e.g., Cherokee, Keys, Morrowan) at different depths. We studied the compositional and textural properties of the core samples using several techniques. Mercury Injection Porosimetry (MIP), Scanning Electron Microsco-py SEM, and Sedigraph measurements are used to assess the pore-throat-size distribu-tion, sorting, texture, and grain size of the samples. Also, displacement pressure at 10% mercury saturation (Pd) and graphically derived threshold pressure (Pc) were deter-mined by MIP technique. SEM images were used for qualitative study of the minerals and pores texture of the core samples. Moreover, EDS (Energy Dispersive X-Ray Spec-trometer), BET specific surface area, and Total Organic Carbon (TOC) measurements were performed to study various parameters and their possible effects on sealing capaci-ty of the samples. We found that shales have the relatively higher average sealing threshold pressure (Pc) than carbonate and sandstone samples. Based on these observations, shale formations could be considered as a promising caprock in terms of retarding scCO{sub 2} flow and leak-age into above formations. We hypothesized that certain characteristics of shales (e.g., 3 fine pore size, pore size distribution, high specific surface area, and strong physical chemical interaction between wetting phase and mineral surface) make them an effi-cient caprock for sealing super critical CO{sub 2}. We found that the displacement pressure at 10% mercury saturation could not be the ultimate representative of the sealing capacity of the rock sample. On the other hand, we believe that graphical method, introduced by Cranganu (2004) is a better indicator of the true sealing capacity. Based on statistical analysis of our samples from Oklahoma Panhandle we assessed the effects of each group of properties (textural and compositional) on maximum supercriti-cal CO{sub 2} height that can be hold by the caprock. We conclude that there is a relatively strong positive relationship (+.40 to +.69) between supercritical CO{sub 2} column height based on Pc and hard/ soft mineral content index (ratio of minerals with Mohs hardness more than 5 over minerals with Mohs hardness less than 5) in both shales and limestone samples. Average median pore rad

  19. Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method establishes a procedure to measure the susceptibility of steel to a time-delayed failure such as that caused by hydrogen. It does so by measuring the threshold for the onset of subcritical crack growth using standard fracture mechanics specimens, irregular-shaped specimens such as notched round bars, or actual product such as fasteners (2) (threaded or unthreaded) springs or components as identified in SAE J78, J81, and J1237. 1.2 This test method is used to evaluate quantitatively: 1.2.1 The relative susceptibility of steels of different composition or a steel with different heat treatments; 1.2.2 The effect of residual hydrogen in the steel as a result of processing, such as melting, thermal mechanical working, surface treatments, coatings, and electroplating; 1.2.3 The effect of hydrogen introduced into the steel caused by external environmental sources of hydrogen, such as fluids and cleaners maintenance chemicals, petrochemical products, and galvanic coupling in an aqueous enviro...

  20. Production expansion continues to accelerate

    SciTech Connect (OSTI)

    Not Available

    1992-08-01

    This paper reports that Saudi Arabian Oil Co. (Saudi Aramco) is continuing its accelerated Crude Oil Expansion Program initiated in 1989 that aims at achieving a 10 million bpd productive capacity by 1995. In addition to major engineering, construction and renovation work related to production expansion, Saudi Aramco drilling and workover operations have been markedly expanded. Since January 1991, rig activity has doubled. As an indication of aging of Saudi production, projects include modernizing current injection water treatment facilities, installing a new seawater injection plant on the Persian Gulf, installing dewatering facilities in a number of locations and installing a pilot gas lift project. In addition, equipment orders indicate the new discoveries south of Riyadh may also need the assistance of water injection from inception of production.

  1. IPA Derivatives for Make-to-Stock Production-Inventory Systems With Lost Sales

    E-Print Network [OSTI]

    and random production capacity, where the finished- goods inventory is controlled by a continuous-time base to the base-stock level and a parameter of the production rate process. These formulas are comprehensive random production processes, as well as feedback information from inventory to production facilities

  2. Water treatment capacity of forward osmosis systems utilizing power plant waste heat

    SciTech Connect (OSTI)

    Zhou, Xingshi; Gingerich, Daniel B.; Mauter, Meagan S.

    2015-06-11

    Forward osmosis (FO) has the potential to improve the energy efficiency of membrane-based water treatment by leveraging waste heat from steam electric power generation as the primary driving force for separation. In this study, we develop a comprehensive FO process model, consisting of membrane separation, heat recovery, and draw solute regeneration (DSR) models. We quantitatively characterize three alternative processes for DSR: distillation, steam stripping, and air stripping. We then construct a mathematical model of the distillation process for DSR that incorporates hydrodynamics, mass and heat transport resistances, and reaction kinetics, and we integrate this into a model for the full FO process. Finally, we utilize this FO process model to derive a first-order approximation of the water production capacity given the rejected heat quantity and quality available at U.S. electric power facilities. We find that the upper bound of FO water treatment capacity using low-grade heat sources at electric power facilities exceeds process water treatment demand for boiler water make-up and flue gas desulfurization wastewater systems.

  3. Development of low-level radioactive waste disposal capacity in the United States - progress or stalemate?

    SciTech Connect (OSTI)

    Devgun, J.S. [Argonne National Lab., IL (United States); Larson, G.S. [Midwest Low-Level Radioactive Waste Commission, St. Paul, MN (United States)

    1995-12-31

    It has been fifteen years since responsibility for the disposal of commercially generated low-level radioactive waste (LLW) was shifted to the states by the United States Congress through the Low-Level Radioactive Waste Policy Act of 1980 (LLRWPA). In December 1985, Congress revisited the issue and enacted the Low-Level Radioactive Waste Policy Amendments Act of 1985 (LLRWPAA). No new disposal sites have opened yet, however, and it is now evident that disposal facility development is more complex, time-consuming, and controversial than originally anticipated. For a nation with a large nuclear power industry, the lack of availability of LLW disposal capacity coupled with a similar lack of high-level radioactive waste disposal capacity could adversely affect the future viability of the nuclear energy option. The U.S. nuclear power industry, with 109 operating reactors, generates about half of the LLW shipped to commercial disposal sites and faces dwindling access to waste disposal sites and escalating waste management costs. The other producers of LLW - industries, government (except the defense related research and production waste), academic institutions, and medical institutions that account for the remaining half of the commercial LLW - face the same storage and cost uncertainties. This paper will summarize the current status of U.S. low-level radioactive waste generation and the status of new disposal facility development efforts by the states. The paper will also examine the factors that have contributed to delays, the most frequently suggested alternatives, and the likelihood of change.

  4. Water treatment capacity of forward osmosis systems utilizing power plant waste heat

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Xingshi; Gingerich, Daniel B.; Mauter, Meagan S.

    2015-06-11

    Forward osmosis (FO) has the potential to improve the energy efficiency of membrane-based water treatment by leveraging waste heat from steam electric power generation as the primary driving force for separation. In this study, we develop a comprehensive FO process model, consisting of membrane separation, heat recovery, and draw solute regeneration (DSR) models. We quantitatively characterize three alternative processes for DSR: distillation, steam stripping, and air stripping. We then construct a mathematical model of the distillation process for DSR that incorporates hydrodynamics, mass and heat transport resistances, and reaction kinetics, and we integrate this into a model for the fullmore »FO process. Finally, we utilize this FO process model to derive a first-order approximation of the water production capacity given the rejected heat quantity and quality available at U.S. electric power facilities. We find that the upper bound of FO water treatment capacity using low-grade heat sources at electric power facilities exceeds process water treatment demand for boiler water make-up and flue gas desulfurization wastewater systems.« less

  5. Hierarchical structures for a robustness-oriented capacity design

    E-Print Network [OSTI]

    Enrico Masoero; Falk K. Wittel; Hans J. Herrmann; B. M. Chiaia

    2015-09-07

    In this paper, we study the response of 2D framed structures made of rectangular cells, to the sudden removal of columns. We employ a simulation algorithm based on the Discrete Element Method, where the structural elements are represented by elasto-plastic Euler Bernoulli beams with elongation-rotation failure threshold. The effect of structural cell slenderness and of topological hierarchy on the dynamic residual strength after damage $\\ROne$ is investigated. Topologically \\textit{hierarchical} frames have a primary structure made of few massive elements, while \\textit{homogeneous} frames are made of many thin elements. We also show how $\\ROne$ depends on the activated collapse mechanisms, which are determined by the mechanical hierarchy between beams and columns, i.e. by their relative strength and stiffness. Finally, principles of robustness-oriented capacity design which seem to be in contrast to the conventional anti-seismic capacity design are addressed.

  6. Hybrid heat capacity-moving slab solid-state laser

    DOE Patents [OSTI]

    Stappaerts, Eddy A.

    2005-03-01

    Laser material is pumped and its stored energy is extracted in a heat capacity laser mode at a high duty factor. When the laser material reaches a maximum temperature, it is removed from the lasing region and a subsequent volume of laser material is positioned into the lasing region to repeat the lasing process. The heated laser material is cooled passively or actively outside the lasing region.

  7. Model documentation: Electricity Market Module, Electricity Capacity Planning submodule

    SciTech Connect (OSTI)

    Not Available

    1994-04-07

    The National Energy Modeling System (NEMS) is a computer modeling system developed by the Energy Information Administration (EIA). The NEMS produces integrated forecasts for energy markets in the United States by achieving a general equilibrium solution for energy supply and demand. Currently, for each year during the period from 1990 through 2010, the NEMS describes energy supply, conversion, consumption, and pricing. The Electricity Market Module (EMM) is the electricity supply component of the National Energy Modeling System (NEMS). The supply of electricity is a conversion activity since electricity is produced from other energy sources (e.g., fossil, nuclear, and renewable). The EMM represents the generation, transmission, and pricing of electricity. The EMM consists of four main submodules: Electricity Capacity Planning (ECP), Electricity Fuel Dispatching (EFD), Electricity Finance and Pricing (EFP), and Load and Demand-Side Management (LDSM). The ECP evaluates changes in the mix of generating capacity that are necessary to meet future demands for electricity and comply with environmental regulations. The EFD represents dispatching (i.e., operating) decisions and determines how to allocate available capacity to meet the current demand for electricity. Using investment expenditures from the ECP and operating costs from the EFD, the EFP calculates the price of electricity, accounting for state-level regulations involving the allocation of costs. The LDSM translates annual demands for electricity into distributions that describe hourly, seasonal, and time-of-day variations. These distributions are used by the EFD and the ECP to determine the quantity and types of generating capacity that are required to insure reliable and economical supplies of electricity. The EMM also represents nonutility suppliers and interregional and international transmission and trade. These activities are included in the EFD and the ECP.

  8. Residential Variable-Capacity Heat Pumps Sized to Heating Loads

    SciTech Connect (OSTI)

    Munk, Jeffrey D.; Jackson, Roderick K.; Odukomaiya, Adewale; Gehl, Anthony C.

    2014-01-01

    Variable capacity heat pumps are an emerging technology offering significant energy savings potential and improved efficiency. With conventional single-speed systems, it is important to appropriately size heat pumps for the cooling load as over-sizing would result in cycling and insufficient latent capacity required for humidity control. These appropriately sized systems are often under-sized for the heating load and require inefficient supplemental electric resistance heat to meet the heating demand. Variable capacity heat pumps address these shortcomings by providing an opportunity to intentionally size systems for the dominant heating season load without adverse effects of cycling or insufficient dehumidification in the cooling season. This intentionally-sized system could result in significant energy savings in the heating season, as the need for inefficient supplemental electric resistance heat is drastically reduced. This is a continuation of a study evaluating the energy consumption of variable capacity heat pumps installed in two unoccupied research homes in Farragut, a suburb of Knoxville, Tennessee. In this particular study, space conditioning systems are intentionally sized for the heating season loads to provide an opportunity to understand and evaluate the impact this would have on electric resistance heat use and dehumidification. The results and conclusions drawn through this research are valid and specific for portions of the Southeastern and Midwestern United States falling in the mixed-humid climate zone. While other regions in the U.S. do not experience this type of climate, this work provides a basis for, and can help understand the implications of other climate zones on residential space conditioning energy consumption. The data presented here will provide a framework for fine tuning residential building EnergyPlus models that are being developed.

  9. Dynamics of the Oil Transition: Modeling Capacity, Costs, and Emissions

    E-Print Network [OSTI]

    Brandt, Adam R.; Farrell, Alexander E.

    2008-01-01

    31] NEB. Canada’s oil sands: opportunities and challenges toUtah. Technical report, Oil Sands Exploration Company andSupply Conventional oil Tar sands production GTL production

  10. A global scale mechanistic model of the photosynthetic capacity

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ali, A. A.; Xu, C.; Rogers, A.; Fisher, R. A.; Wullschleger, S. D.; McDowell, N. G.; Massoud, E. C.; Vrugt, J. A.; Muss, J. D.; Fisher, J. B.; et al

    2015-08-10

    Although plant photosynthetic capacity as determined by the maximum carboxylation rate (i.e., Vc, max25) and the maximum electron transport rate (i.e., Jmax25) at a reference temperature (generally 25 °C) is known to vary substantially in space and time in response to environmental conditions, it is typically parameterized in Earth system models (ESMs) with tabulated values associated to plant functional types. In this study, we developed a mechanistic model of leaf utilization of nitrogen for assimilation (LUNA V1.0) to predict the photosynthetic capacity at the global scale under different environmental conditions, based on the optimization of nitrogen allocated among light capture,more »electron transport, carboxylation, and respiration. The LUNA model was able to reasonably well capture the observed patterns of photosynthetic capacity in view that it explained approximately 55 % of the variation in observed Vc, max25 and 65 % of the variation in observed Jmax25 across the globe. Our model simulations under current and future climate conditions indicated that Vc, max25 could be most affected in high-latitude regions under a warming climate and that ESMs using a fixed Vc, max25 or Jmax25 by plant functional types were likely to substantially overestimate future global photosynthesis.« less

  11. Enhancing electrochemical intermediate solvation through electrolyte anion selection to increase nonaqueous Li-O$_2$ battery capacity

    E-Print Network [OSTI]

    Burke, Colin M; Khetan, Abhishek; Viswanathan, Venkatasubramanian; McCloskey, Bryan D

    2015-01-01

    Among the 'beyond Li-ion' battery chemistries, nonaqueous Li-O$_2$ batteries have the highest theoretical specific energy and as a result have attracted significant research attention over the past decade. A critical scientific challenge facing nonaqueous Li-O$_2$ batteries is the electronically insulating nature of the primary discharge product, lithium peroxide, which passivates the battery cathode as it is formed, leading to low ultimate cell capacities. Recently, strategies to enhance solubility to circumvent this issue have been reported, but rely upon electrolyte formulations that further decrease the overall electrochemical stability of the system, thereby deleteriously affecting battery rechargeability. In this study, we report that a significant enhancement (greater than four-fold) in Li-O$_2$ cell capacity is possible by appropriately selecting the salt anion in the electrolyte solution. Using $^7$Li nuclear magnetic resonance and modeling, we confirm that this improvement is a result of enhanced Li...

  12. Heat capacity of the site-diluted spin dimer system Ba?(Mn1-xVx)?O?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Samulon, E. C.; Shapiro, M. C.; Fisher, I. R.

    2011-08-01

    Heat-capacity and susceptibility measurements have been performed on the diluted spin dimer compound Ba?(Mn1-xVx)?O?. The parent compound Ba?Mn?O? is a spin dimer system based on pairs of antiferromagnetically coupled S=1, 3d² Mn?? ions such that the zero-field ground state is a product of singlets. Substitution of nonmagnetic S=0, 3d? V?? ions leads to an interacting network of unpaired Mn moments, the low-temperature properties of which are explored in the limit of small concentrations 0?x?0.05. The zero-field heat capacity of this diluted system reveals a progressive removal of magnetic entropy over an extended range of temperatures, with no evidence for a phase transition. The concentration dependence does not conform to expectations for a spin-glass state. Rather, the data suggest a low-temperature random singlet phase, reflecting the hierarchy of exchange energies found in this system.

  13. Assessment of the methane oxidation capacity of compacted soils intended for use as landfill cover materials

    SciTech Connect (OSTI)

    Rachor, Ingke; Gebert, Julia; Groengroeft, Alexander; Pfeiffer, Eva-Maria

    2011-05-15

    The microbial oxidation of methane in engineered cover soils is considered a potent option for the mitigation of emissions from old landfills or sites containing wastes of low methane generation rates. A laboratory column study was conducted in order to derive design criteria that enable construction of an effective methane oxidising cover from the range of soils that are available to the landfill operator. Therefore, the methane oxidation capacity of different soils was assessed under simulated landfill conditions. Five sandy potential landfill top cover materials with varying contents of silt and clay were investigated with respect to methane oxidation and corresponding soil gas composition over a period of four months. The soils were compacted to 95% of their specific proctor density, resulting in bulk densities of 1.4-1.7 g cm{sup -3}, reflecting considerably unfavourable conditions for methane oxidation due to reduced air-filled porosity. The soil water content was adjusted to field capacity, resulting in water contents ranging from 16.2 to 48.5 vol.%. The investigated inlet fluxes ranged from 25 to about 100 g CH{sub 4} m{sup -2} d{sup -1}, covering the methane load proposed to allow for complete oxidation in landfill covers under Western European climate conditions and hence being suggested as a criterion for release from aftercare. The vertical distribution of gas concentrations, methane flux balances as well as stable carbon isotope studies allowed for clear process identifications. Higher inlet fluxes led to a reduction of the aerated zone, an increase in the absolute methane oxidation rate and a decline of the relative proportion of oxidized methane. For each material, a specific maximum oxidation rate was determined, which varied between 20 and 95 g CH{sub 4} m{sup -2} d{sup -1} and which was positively correlated to the air-filled porosity of the soil. Methane oxidation efficiencies and gas profile data imply a strong link between oxidation capacity and diffusive ingress of atmospheric air. For one material with elevated levels of fine particles and high organic matter content, methane production impeded the quantification of methane oxidation potentials. Regarding the design of landfill cover layers it was concluded that the magnitude of the expected methane load, the texture and expected compaction of the cover material are key variables that need to be known. Based on these, a column study can serve as an appropriate testing system to determine the methane oxidation capacity of a soil intended as landfill cover material.

  14. Building Long-Term Sustained Capacity and Influencing Decisions: The U.S. DOE SEP Capacity Model

    SciTech Connect (OSTI)

    McCarthy, Patrick [TecMarket Works; Hall, Nick [TecMarket Works; Schweitzer, Martin [ORNL; Lambert, Faith [U.S. Department of Energy

    2011-01-01

    This paper presents a state-level systems model that incorporates traditional behavior change models into a more extensive framework for explaining energy efficiency and renewable energy impacts. The model was developed from a seminal national study of state energy programs covering a broad array of programmatic topic areas. The study examined a wide range of program offerings within 24 states, involving over 25 years of state efforts. While specific priorities and outcomes varied greatly across the states for each of the topic areas, consistent systems-level capacity-building patterns were revealed. This model demonstrates how the U.S. Department of Energy s (DOE s) State Energy Program (SEP) and non-SEP resources, when incorporated into a framework of essential capacity-building components, can lead to energy efficiency and renewable energy achievements. This paper then features two case study illustrations of the model.

  15. Cost estimate for muddy water palladium production facility at Mound

    SciTech Connect (OSTI)

    McAdams, R.K.

    1988-11-30

    An economic feasibility study was performed on the ''Muddy Water'' low-chlorine content palladium powder production process developed by Mound. The total capital investment and total operating costs (dollars per gram) were determined for production batch sizes of 1--10 kg in 1-kg increments. The report includes a brief description of the Muddy Water process, the process flow diagram, and material balances for the various production batch sizes. Two types of facilities were evaluated--one for production of new, ''virgin'' palladium powder, and one for recycling existing material. The total capital investment for virgin facilities ranged from $600,000 --$1.3 million for production batch sizes of 1--10 kg, respectively. The range for recycle facilities was $1--$2.3 million. The total operating cost for 100% acceptable powder production in the virgin facilities ranged from $23 per gram for a 1-kg production batch size to $8 per gram for a 10-kg batch size. Similarly for recycle facilities, the total operating cost ranged from $34 per gram to $5 per gram. The total operating cost versus product acceptability (ranging from 50%--100% acceptability) was also evaluated for both virgin and recycle facilities. Because production sizes studied vary widely and because scale-up factors are unknown for batch sizes greater than 1 kg, all costs are ''order-of-magnitude'' estimates. All costs reported are in 1987 dollars.

  16. Parameter Estimation and Capacity Fade Analysis of Lithium-Ion Batteries Using Reformulated Models

    E-Print Network [OSTI]

    Braatz, Richard D.

    Many researchers have worked to develop methods to analyze and characterize capacity fade in lithium-ion batteries. As a complement to approaches to mathematically model capacity fade that require detailed understanding ...

  17. The State Energy Program: Building Energy Efficiency and Renewable Energy Capacity in the States

    Office of Energy Efficiency and Renewable Energy (EERE)

    This study documents the capacity-building effects that the federal State Energy Program (SEP) has had on the states' capacity to design, manage and implement energy efficiency and renewable energy programs.

  18. DOE Solicits Views on the Implementation of Large-Capacity Clothes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Large-Capacity Clothes Washer Waivers DOE Solicits Views on the Implementation of Large-Capacity Clothes Washer Waivers November 30, 2010 - 10:56am Addthis The Department of...

  19. Design of a cluster analysis heuristic for the configuration and capacity management of manufacturing cells 

    E-Print Network [OSTI]

    Shim, Young Hak

    2007-09-17

    , the machine capacity was first ensured, and then manufacturing cells were configured to minimize intercellular movements. In order to ensure the machine capacity, the duplication of machines and the split of operations are allowed and operations are assigned...

  20. On the Capacity of the Vector MAC and BC with Feedback

    E-Print Network [OSTI]

    Jafar, Syed A.

    On the Capacity of the Vector MAC and BC with Feedback Syed Ali Jafar Qualcomm Incorporated San to scalar MACs and BCs, respectively. We also determine the capacity enhancement due to feedback at high SNR

  1. Tension capacity of two drilled and grouted piles 

    E-Print Network [OSTI]

    Kubena, Mark Edward

    1989-01-01

    and grouted piles are being proposed as an alternate method for the foundation of deepwater structures. Drilled and grouted piles are composite piles formed by drilling an oversized hole, inserting a smaller steel casing or pile to the bottom of the open...TENSION CAPACITY OF TWO DRILLED AND GROUTED PILES A Thesis by MARK EDWARD KUBENA Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1989...

  2. South Africa-Enhancing Capacity for Low Emission Development Strategies

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing Capacity forSiliciumEnergy Inc JumpPennsylvania:Sound(EC-LEDS) | Open Energy

  3. Property:Geothermal/CapacityBtuHr | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo,AltFuelVehicle2 Jump to: navigation, search This is aAnnualGenGwhYr Jump to:CapacityBtuHr

  4. Property:Installed Capacity (MW) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo,AltFuelVehicle2 Jump to: navigation, searchContDiv JumpTechDsc Jump to:cons JumpCapacity

  5. Property:GrossProdCapacity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to: navigation,PropertyPartner7Website Jump to:TypeGrossProdCapacity Jump to:

  6. Building REDD Capacity in Developing Countries | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmentalBowerbank, Maine: EnergyEnergyOhio: EnergyNorth Dakota: Energy ResourcesREDD Capacity

  7. Climate Change Capacity Development (C3D+) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company) Jump to:NewMinnesota: EnergyVirginia: EnergyCapacity

  8. LEDS Capacity Building and Training Inventory | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View NewGuam:onItronKanoshKetchikanKlondikeKunBLEDS Capacity Building and

  9. EIA - Natural Gas Pipeline Network - Pipeline Capacity and Utilization

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1 Table272/SPipeline Utilization & Capacity About

  10. EIA - Natural Gas Pipeline Network - Region To Region System Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1 Table272/SPipeline Utilization & Capacity

  11. State Support of Domestic Production

    SciTech Connect (OSTI)

    Amy Wright

    2007-12-30

    This project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under the State Support of Domestic Production DE-FC26-04NT15456. The Interstate Oil and Gas Compact Commission (IOGCC) performed efforts in support of State programs related to the security, reliability and growth if our nation's domestic production of oil and natural gas. The project objectives were to improve the States ability to monitor the security of oil and gas operations; to maximize the production of domestic oil and natural gas thereby minimizing the threat to national security posed by interruptions in energy imports; to assist States in developing and maintaining high standards of environmental protection; to assist in addressing issues that limit the capacity of the industry; to promote the deployment of the appropriate application of technology for regulatory efficiency; and to inform the public about emerging energy issues.

  12. Product Note Q, S, DEAE, CM Ceramic HyperD F

    E-Print Network [OSTI]

    Lebendiker, Mario

    Product Note Q, S, DEAE, CM Ceramic HyperD® F Ion Exchange Sorbents · High dynamic binding capacity at high flow rates · Truly rigid, non-compressible sorbent · Salt tolerant CM Ceramic HyperD F sorbent, and CM Ceramic HyperD F ion exchangers are high capacity sorbents designed for efficient and scalable

  13. Outlook for Refinery Outages and Available Refinery Capacity...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of gasoline and distillate, and to include a more detailed consideration of the impact of unexpected outages on product supplies. This report reviews the potential...

  14. "Assessment of the Adequacy of Natural Gas Pipeline Capacity...

    Broader source: Energy.gov (indexed) [DOE]

    Related Articles QER Update and New Reports On-Line DOE-Sponsored Project to Study Shale Gas Production Favorable Supplies, Costs, Environmental Profile for Natural Gas...

  15. Assessment of the Adequacy of Natural Gas Pipeline Capacity in...

    Office of Environmental Management (EM)

    changes to the Northeast gas market. Chief among these has been the rapid growth of gas production from the Marcellus Shale in Pennsylvania and new pipeline and processing...

  16. Democratic Republic of Congo-Low Emission Capacity Building Programme...

    Open Energy Info (EERE)

    departments in charge of production and the environment (environment, agriculture, energy, oil, mining, transport, urban planning and housing, land-affairs), the director of...

  17. Nitrification Capacities of Texas Soil Types and Factors which Affect Nitrification. 

    E-Print Network [OSTI]

    Sterges, A. J.; Fraps, G S. (George Stronach)

    1947-01-01

    capacities of soils for ammonium sulphate may range from (I to loo percent but additions of bacteria and calcium carbonate will increase the nitrifying capacities of most soils and subsoils to a high extent. Soils with low nitrification capacities have... percent of that of ammonium sulphate, but in >oils of low nitrifying capacity, nitrogen of cottonseed meal may be nitrified more reaclily than that of ammonium sulphate. When the fertilizing values of organic nitrogenous fertilizers are to be compared...

  18. An Analytical Model for Predicting the Remaining Battery Capacity of Lithium-Ion Batteries

    E-Print Network [OSTI]

    Pedram, Massoud

    An Analytical Model for Predicting the Remaining Battery Capacity of Lithium-Ion Batteries Peng cycle-life tends to shrink significantly. The capacities of commercial lithium-ion batteries fade by 10 prediction model to estimate the remaining capacity of a Lithium-Ion battery. The proposed analytical model

  19. DETERMINATION OF PHOTOVOLTAIC EFFECTIVE CAPACITY FOR Richard Perez for Clean Power Research

    E-Print Network [OSTI]

    Perez, Richard R.

    DETERMINATION OF PHOTOVOLTAIC EFFECTIVE CAPACITY FOR NEW JERSEY Richard Perez for Clean Power) requirements. #12;DETERMINATION OF PHOTOVOLTAIC EFFECTIVE CAPACITY FOR NEW JERSEY The ELCC metric dispatchable power plant. 2 #12;DETERMINATION OF PHOTOVOLTAIC EFFECTIVE CAPACITY FOR NEW JERSEY 0 1 2 3 4 5 6 7

  20. On Secrecy Outage Capacity of Fading Channels Under Relaxed Delay Constraints

    E-Print Network [OSTI]

    Koksal, Can Emre

    On Secrecy Outage Capacity of Fading Channels Under Relaxed Delay Constraints Onur Gungor, Can Emre delay constraints. More specif- ically, we extend the definition of outage secrecy capacity for single, we provide bounds on secrecy outage capacity with k + 1 block delay constraint. We show

  1. Outage Capacity of the Fading Relay Channel in the Low SNR Regime

    E-Print Network [OSTI]

    Tse, David

    Outage Capacity of the Fading Relay Channel in the Low SNR Regime A. Salman Avestimehr and David N at the outage capacity of the fading relay channel with half-duplex constraint in the low SNR regime. First we. In this case we show that a Bursty Amplify-Forward (BAF) protocol is optimal and achieves the outage capacity

  2. MIMO Outage Capacity in the High SNR Regime Narayan Prasad Mahesh K. Varanasi

    E-Print Network [OSTI]

    Varanasi, Mahesh K.

    MIMO Outage Capacity in the High SNR Regime Narayan Prasad Mahesh K. Varanasi NEC Labs. America channel with coherent reception and pro- vide a sharp characterization of the outage capacity in the form on the outage capacities un- der a long-term and a short-term power constraint as well as on the delay

  3. Sensitivity of Gaussian Channel Capacity and ate-Distortion Function to nonGaussian Contamination

    E-Print Network [OSTI]

    Verdú, Sergio

    Sensitivity of Gaussian Channel Capacity and ate-Distortion Function to nonGaussian Contamination-Gaussian contaminating noise. Although the ca- pacity of such channels cannot be evaluated in general, we analyze the decrease in capacity, or sensitivity of the channel capacity to the weak contaminating noise. We show

  4. Calculation of heat capacities of light and heavy water by path-integral molecular dynamics

    E-Print Network [OSTI]

    Nielsen, Steven O.

    Calculation of heat capacities of light and heavy water by path-integral molecular dynamics 30 September 2005 As an application of atomistic simulation methods to heat capacities, path-integral has estimated the heat capacities too high, the quantum simulation based on path-integral molecular

  5. Capacity Bounds for Energy Efficient Data Streaming in Homogeneous Wireless Ad Hoc Networks

    E-Print Network [OSTI]

    Li, Zongpeng

    Capacity Bounds for Energy Efficient Data Streaming in Homogeneous Wireless Ad Hoc Networks Hanan activation schemes with provable asymptotic bounds on the capacity and energy efficiency of the induced add to the noise levels of each other and cause the overall network capacity to decrease

  6. Capacity of the Energy Harvesting Channel with Energy Arrival Information at the Receiver

    E-Print Network [OSTI]

    Yener, Aylin

    Capacity of the Energy Harvesting Channel with Energy Arrival Information at the Receiver Omur Ozel- pacity is invariant to the non-causal knowledge of energy arrivals. Finally, we show that the capacity the battery energy at the transmitter is independent of the message. The capacity of this channel with only

  7. Behavioral/Systems/Cognitive How the Optic Nerve Allocates Space, Energy Capacity,

    E-Print Network [OSTI]

    Pennsylvania, University of

    Behavioral/Systems/Cognitive How the Optic Nerve Allocates Space, Energy Capacity, and Information twice the space and energy capacity. We conclude that the optic nerve conserves space more spikes. These considerations led us to quantify how space, energy capacity, and firing rate

  8. Energy-efficient Capacity-constrained Routing in Wireless Sensor Networks

    E-Print Network [OSTI]

    Venkatesan, S.

    1 Energy-efficient Capacity-constrained Routing in Wireless Sensor Networks Maulin Patel*, R of packets, which will waste considerable amount of energy. This paper present a Minimum-cost Capacity-hoc networks; Routing; Maximum Lifetime; Energy efficient; Capacity-constrained I. INTRODUCTION Wireless sensor

  9. Towards Achieving Linear Capacity Scaling in Wireless Networks through Directed Energy Links

    E-Print Network [OSTI]

    Misra, Satyajayant

    1 Towards Achieving Linear Capacity Scaling in Wireless Networks through Directed Energy Links Hong-to-linear (CTL) capacity scaling through the use of directed energy (DE) links such as laser communications links have many important applications. However, Gupta and Kumar showed that the capacity of multi

  10. Energy, Latency and Capacity Trade-offs in wireless multi-hop networks

    E-Print Network [OSTI]

    Jaffrès-Runser, Katia

    Energy, Latency and Capacity Trade-offs in wireless multi-hop networks Jean-Marie Gorce, Ruifeng Abstract--This paper concentrates on characterizing energy, latency and capacity trade-offs in multi, our analytical results highlight how the energy/delay Pareto front moves when considering a capacity

  11. Capacity of the Discrete Memoryless Energy Harvesting Channel with Side Information

    E-Print Network [OSTI]

    Yener, Aylin

    Capacity of the Discrete Memoryless Energy Harvesting Channel with Side Information Omur Ozel1 to the available battery energy in that channel use. The capacity of this channel with only transmitter side, The Pennsylvania State University, University Park, PA 16802 Abstract--We determine the capacity of a discrete

  12. The Capacity-Cost Function of Discrete Additive Noise Channels with and without Feedback

    E-Print Network [OSTI]

    Wehlau, David

    of discrete channels with memory. Index Terms { Channels with memory, additive noise, capacity-cost functionThe Capacity-Cost Function of Discrete Additive Noise Channels with and without Feedback #3; Fady by investigating the capacity- cost function (C (#12;)) of such additive noise channels without feedback. We

  13. Energy Efficiency Analysis of MISO-OFDM Communication Systems Considering Power and Capacity Constraints

    E-Print Network [OSTI]

    Wang, Cheng-Xiang

    Energy Efficiency Analysis of MISO-OFDM Communication Systems Considering Power and Capacity subchannel capacity threshold. Moreover, the energy efficiency of MISO-OFDM communication systems starts-input single-output (MISO) . orthogonal frequency division multiplexing (OFDM) . energy efficiency. capacity

  14. A Tractable Revenue Management Model for Capacity Allocation and Overbooking over an Airline Network

    E-Print Network [OSTI]

    Topaloglu, Huseyin

    to the reservations were given by a separable function, then the optimality equation for the joint capacity allocationA Tractable Revenue Management Model for Capacity Allocation and Overbooking over an Airline a revenue management model to jointly make the capacity allocation and overbooking decisions over an airline

  15. Edinburgh Research Explorer ERK2 Suppresses Self-Renewal Capacity of Embryonic Stem

    E-Print Network [OSTI]

    Koehn, Philipp

    Edinburgh Research Explorer ERK2 Suppresses Self-Renewal Capacity of Embryonic Stem Cells, T 2013, 'ERK2 Suppresses Self-Renewal Capacity of Embryonic Stem Cells, but Is Not Required for Multi date: 26. Jun. 2014 #12;ERK2 Suppresses Self-Renewal Capacity of Embryonic Stem Cells

  16. Capacity Planning in a General Supply Chain with Multiple Contract Types Single Period Model

    E-Print Network [OSTI]

    Graves, Stephen C.

    and sufficient capacity to meet market demands. However, capacity planning is a very challenging task for manyCapacity Planning in a General Supply Chain with Multiple Contract Types ­ Single Period Model Xin Huang · Stephen C. Graves Department of Electrical Engineering and Computer Science, Massachusetts

  17. Estimate of Maximum Underground Working Gas Storage Capacity in the United States

    Reports and Publications (EIA)

    2006-01-01

    This report examines the aggregate maximum capacity for U.S. natural gas storage. Although the concept of maximum capacity seems quite straightforward, there are numerous issues that preclude the determination of a definitive maximum volume. The report presents three alternative estimates for maximum capacity, indicating appropriate caveats for each.

  18. IEEE TRANSACTIONS ON INFORMATION THEORY, VOL. 49, NO. 11, NOVEMBER 2003 2895 Capacity and Optimal Power Allocation for Fading

    E-Print Network [OSTI]

    Jindal, Nihar

    of Shannon capacity have been developed for multiuser fading channels: ergodic capacity and outage ca- pacity]­[3], while outage capacity achieves a constant rate in all non-outage fading states subject to an outage probability [4], [5]. Zero-outage capacity refers to outage capacity with zero outage probability [6

  19. Hyperdense coding and superadditivity of classical capacities in hypersphere theories

    E-Print Network [OSTI]

    Serge Massar; Stefano Pironio; Damián Pitalúa-García

    2015-04-20

    In quantum superdense coding, two parties previously sharing entanglement can communicate a two bit message by sending a single qubit. We study this feature in the broader framework of general probabilistic theories. We consider a particular class of theories in which the local state space of the communicating parties corresponds to Euclidian hyperballs of dimension n (the case n = 3 corresponds to the Bloch ball of quantum theory). We show that a single n-ball can encode at most one bit of information, independently of n. We introduce dense coding protocols in which log_2 (n+1) bits are communicated if entanglement is previously shared by the communicating parties. For n > 3, these protocols are more powerful than the quantum one, because more than two bits are communicated by transmission of a system that locally encodes at most one bit. We call this phenomenon hyperdense coding. Our hyperdense coding protocols imply superadditive classical capacities: two entangled systems can encode log_2 (n+1) > 2 bits, even though each system individually encodes at most one bit. In our examples, hyperdense coding and superadditivity of classical capacities come at the expense of violating tomographic locality or dynamical continuous reversibility.

  20. Dynamics of the Oil Transition: Modeling Capacity, Costs, and Emissions

    E-Print Network [OSTI]

    Brandt, Adam R.; Farrell, Alexander E.

    2008-01-01

    crude-oil. This ?oor is required to support the productionoil production would spur development of SCPs as fast as has been seen historically for crudecrude-oil-equivalent fuels), the “emissions penalty” (in gigatonnes of carbon equivalent), and the total emissions from fuel production

  1. Dual capacity compressor with reversible motor and controls arrangement therefor

    DOE Patents [OSTI]

    Sisk, Francis J. (Washington Township, Fayette County, PA)

    1980-12-02

    A hermetic reciprocating compressor such as may be used in heat pump applications is provided for dual capacity operation by providing the crankpin of the crankshaft with an eccentric ring rotatably mounted thereon, and with the end of the connecting rod opposite the piston encompassing the outer circumference of the eccentric ring, with means limiting the rotation of the eccentric ring upon the crankpin between one end point and an opposite angularly displaced end point to provide different values of eccentricity depending upon which end point the eccentric ring is rotated to upon the crankpin, and a reversible motor in the hermetic shell of the compressor for rotating the crankshaft, the motor operating in one direction effecting the angular displacement of the eccentric ring relative to the crankpin to the one end point, and in the opposite direction effecting the angular displacement of the eccentric ring relative to the crankpin to the opposite end point, this arrangement automatically giving different stroke lengths depending upon the direction of motor rotation. The mechanical structure of the arrangement may take various forms including at least one in which any impact of reversal is reduced by utilizing lubricant passages and chambers at the interface area of the crankpin and eccentric ring to provide a dashpot effect. In the main intended application of the arrangement according to the invention, that is, in a refrigerating or air conditioning system, it is desirable to insure a delay during reversal of the direction of compressor operation. A control arrangement is provided in which the control system controls the direction of motor operation in accordance with temperature conditions, the system including control means for effecting operation in a low capacity direction or alternatively in a high capacity direction in response to one set, and another set, respectively, of temperature conditions and with timer means delaying a restart of the compressor motor for at least a predetermined time in response to a condition of the control means operative to initiate a change in the operating direction of the compressor when it restarts.

  2. Integrating Steel Production with Mineral Carbon Sequestration

    SciTech Connect (OSTI)

    Klaus Lackner; Paul Doby; Tuncel Yegulalp; Samuel Krevor; Christopher Graves

    2008-05-01

    The objectives of the project were (i) to develop a combination iron oxide production and carbon sequestration plant that will use serpentine ores as the source of iron and the extraction tailings as the storage element for CO2 disposal, (ii) the identification of locations within the US where this process may be implemented and (iii) to create a standardized process to characterize the serpentine deposits in terms of carbon disposal capacity and iron and steel production capacity. The first objective was not accomplished. The research failed to identify a technique to accelerate direct aqueous mineral carbonation, the limiting step in the integration of steel production and carbon sequestration. Objective (ii) was accomplished. It was found that the sequestration potential of the ultramafic resource surfaces in the US and Puerto Rico is approximately 4,647 Gt of CO2 or over 500 years of current US production of CO2. Lastly, a computer model was developed to investigate the impact of various system parameters (recoveries and efficiencies and capacities of different system components) and serpentinite quality as well as incorporation of CO2 from sources outside the steel industry.

  3. Aalborg Universitet Hydrothermal Processing of Lignin for Bio-Crude Production

    E-Print Network [OSTI]

    Rosendahl, Lasse

    Aalborg Universitet Hydrothermal Processing of Lignin for Bio-Crude Production Grigoras, Ionela.aau.dk on: juli 04, 2015 #12;Hydrothermal Processing of Lignin for Bio-crude Production Ionela F. Grigoras) per day, and with an oil production capacity questioned constantly, together with the increasing CO2

  4. World Biofuels Production Potential Understanding the Challenges to Meeting the U.S. Renewable Fuel Standard

    SciTech Connect (OSTI)

    Sastri, B.; Lee, A.

    2008-09-15

    This study by the U.S. Department of Energy (DOE) estimates the worldwide potential to produce biofuels including biofuels for export. It was undertaken to improve our understanding of the potential for imported biofuels to satisfy the requirements of Title II of the 2007 Energy Independence and Security Act (EISA) in the coming decades. Many other countries biofuels production and policies are expanding as rapidly as ours. Therefore, we modeled a detailed and up-to-date representation of the amount of biofuel feedstocks that are being and can be grown, current and future biofuels production capacity, and other factors relevant to the economic competitiveness of worldwide biofuels production, use, and trade. The Oak Ridge National Laboratory (ORNL) identified and prepared feedstock data for countries that were likely to be significant exporters of biofuels to the U.S. The National Renewable Energy Laboratory (NREL) calculated conversion costs by conducting material flow analyses and technology assessments on biofuels technologies. Brookhaven National Laboratory (BNL) integrated the country specific feedstock estimates and conversion costs into the global Energy Technology Perspectives (ETP) MARKAL (MARKet ALlocation) model. The model uses least-cost optimization to project the future state of the global energy system in five year increments. World biofuels production was assessed over the 2010 to 2030 timeframe using scenarios covering a range U.S. policies (tax credits, tariffs, and regulations), as well as oil prices, feedstock availability, and a global CO{sub 2} price. All scenarios include the full implementation of existing U.S. and selected other countries biofuels policies (Table 4). For the U.S., the most important policy is the EISA Title II Renewable Fuel Standard (RFS). It progressively increases the required volumes of renewable fuel used in motor vehicles (Appendix B). The RFS requires 36 billion (B) gallons (gal) per year of renewable fuels by 2022. Within the mandate, amounts of advanced biofuels, including biomass-based diesel and cellulosic biofuels, are required beginning in 2009. Imported renewable fuels are also eligible for the RFS. Another key U.S. policy is the $1.01 per gal tax credit for producers of cellulosic biofuels enacted as part of the 2008 Farm Bill. This credit, along with the DOE's research, development and demonstration (RD&D) programs, are assumed to enable the rapid expansion of U.S. and global cellulosic biofuels production needed for the U.S. to approach the 2022 RFS goal. While the Environmental Protection Agency (EPA) has yet to issue RFS rules to determine which fuels would meet the greenhouse gas (GHG) reduction and land use restrictions specified in EISA, we assume that cellulosic ethanol, biomass-to-liquid fuels (BTL), sugar-derived ethanol, and fatty acid methyl ester biodiesel would all meet the EISA advanced biofuel requirements. We also assume that enough U.S. corn ethanol would meet EISA's biofuel requirements or otherwise be grandfathered under EISA to reach 15 B gal per year.

  5. Hydrogen Production

    SciTech Connect (OSTI)

    2014-09-01

    This 2-page fact sheet provides a brief introduction to hydrogen production technologies. Intended for a non-technical audience, it explains how different resources and processes can be used to produce hydrogen. It includes an overview of research goals as well as “quick facts” about hydrogen energy resources and production technologies.

  6. High capacity adsorption media and method of producing

    DOE Patents [OSTI]

    Tranter, Troy J. (Idaho Falls, ID); Herbst, R. Scott (Idaho Falls, ID); Mann, Nicholas R. (Blackfoot, ID); Todd, Terry A. (Aberdeen, ID)

    2008-05-06

    A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

  7. High capacity adsorption media and method of producing

    DOE Patents [OSTI]

    Tranter, Troy J. (Idaho Falls, ID); Mann, Nicholas R. (Blackfoot, ID); Todd, Terry A. (Aberdeen, ID); Herbst, Ronald S. (Idaho Falls, ID)

    2010-10-05

    A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving and/or suspending at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

  8. Dynamics of the Oil Transition: Modeling Capacity, Costs, and Emissions

    E-Print Network [OSTI]

    Brandt, Adam R.; Farrell, Alexander E.

    2008-01-01

    entirely from steam-induced heavy oil production in Cali-from Venezuela’s extra-heavy oil reached about 0.6 Mbbl/d inliquid fuels. Heavy and extra-heavy oil are very viscous and

  9. Incremental nonlinear dynamic data reconciliation

    E-Print Network [OSTI]

    Der, Ralf

    by a compartment model including the chemical reactions, the heat transfer through the walls of the 1 #12; reaction estimation is a topic of central importance in plant control. The complexity of real world plants in the applications considered so far. 1 Introduction Measurement noise reduction and parameter estimation is a topic

  10. Improving Regulation Through Incremental Adjustment

    E-Print Network [OSTI]

    Glicksman, Robert L.; Shapiro, Sidney A.

    2004-03-01

    if it oc curred"). 46. Schuck, supra note 44, at 283 ("By reducing the hardships and the sense of injustice suf· fered by those to whom a rule applies, exceptions diminish the pressure to challenge the rule it self."). 47. WAIT Radio v. FCC, 418 F.2d 1153... C.P.R. § 125.85(a)(2». . 1194 b. Evaluation KANSAS LAW REVIEW [Vol. 52 A regulated entity is entitled to a harm-based adjustment if it can establish that the adjustment would not lead to decreased protection for people or the environment. When...

  11. Incremental speech synthesis Jens Edlund

    E-Print Network [OSTI]

    Boye, Johan

    that are unimportant for the interaction, such as a door slamming or someone coughing. These events are often brief

  12. Proposed changes to generating capacity 1980-1989 for the contiguous United States: as projected by the Regional Electric Reliability Councils in their April 1, 1980 long-range coordinated planning reports to the Department of Energy

    SciTech Connect (OSTI)

    1980-12-01

    The changes in generating capacity projected for 1980 to 1989 are summarized. Tabulated data provide summaries to the information on projected generating unit construction, retirements, and changes, in several different categories and groupings. The new generating units to be completed by the end of 1989 total 699, representing 259,490 megawatts. This total includes 10 wind power and one fuel cell installations totaling 48.5 MW to be completed by the end of 1989. There are 321 units totaling 13,222 MW to be retired. There are capacity changes due to upratings and deratings. Summary data are presented for: total requirement for electric energy generation for 1985; hydroelectric energy production for 1985; nuclear energy production for 1985; geothermal and other energy production for 1985; approximate non-fossil generation for 1985; range of fossil energy requirements for 1985; actual fossil energy sources 1974 to 1979; estimated range of fossil fuel requirements for 1985; coal capacity available in 1985; and computation of fuel use in 1985. Power plant capacity factors are presented. Extensive data on proposed generating capacity changes by individual units in the 9 Regional Electric Reliability Councils are presented.

  13. Hydrogen Production

    Fuel Cell Technologies Publication and Product Library (EERE)

    This 2-page fact sheet provides a brief introduction to hydrogen production technologies. Intended for a non-technical audience, it explains how different resources and processes can be used to produ

  14. Water Constraints in an Electric Sector Capacity Expansion Model

    SciTech Connect (OSTI)

    Macknick, Jordan; Cohen, Stuart; Newmark, Robin; Martinez, Andrew; Sullivan, Patrick; Tidwell, Vince

    2015-07-17

    This analysis provides a description of the first U.S. national electricity capacity expansion model to incorporate water resource availability and costs as a constraint for the future development of the electricity sector. The Regional Energy Deployment System (ReEDS) model was modified to incorporate water resource availability constraints and costs in each of its 134 Balancing Area (BA) regions along with differences in costs and efficiencies of cooling systems. Water resource availability and cost data are from recently completed research at Sandia National Laboratories (Tidwell et al. 2013b). Scenarios analyzed include a business-as-usual 3 This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. scenario without water constraints as well as four scenarios that include water constraints and allow for different cooling systems and types of water resources to be utilized. This analysis provides insight into where water resource constraints could affect the choice, configuration, or location of new electricity technologies.

  15. Proceedings of the 13th Sede Boqer Symposium on Solar Electricity Production 1 October 31-November 1, 2005

    E-Print Network [OSTI]

    Heinemann, Detlev

    and a continuous increase of the installed capacity can be observed. As could be expected, the systems are subject with an installed capacity below 5 - 10kW. For small and medium size systems a scheme working with Irradiance dataProceedings of the 13th Sede Boqer Symposium on Solar Electricity Production 1 October 31-November

  16. Wireless networks in non-ergodic multipath fading : capacity and relaying performance analysis

    E-Print Network [OSTI]

    Nebat, Yoav

    2007-01-01

    3 The Capacity of Wireless Networks in Non-Ergodic Multipathdiversity in wireless networks: Ef?cient protocols anddiversity in wireless networks,” IEEE Trans. Inf. Theory,

  17. Grid Integration and the Carrying Capacity of the U.S. Grid to...

    Broader source: Energy.gov (indexed) [DOE]

    identifies emerging practices in power system planning and operation that can facilitate grid integration, and proposes a unifying concept-economic carrying capacity-that can...

  18. Habitat Use and Energetic Carrying Capacity of American Black Ducks Wintering in Western Tennessee

    E-Print Network [OSTI]

    Gray, Matthew

    ) More info on Habitat Use Manage for more energe)cally important foods, and other waterfowl, and es)mate energe)c carrying capacity, in treated

  19. The Third Wave: Innovation and Strategic Military Capacity in the Future

    E-Print Network [OSTI]

    COWHEY, Peter

    2013-01-01

    APRIL 2013 The Third Wave: Innovation and Strategic Militaryassumes that the balance of innovation capacity matters forThe analysis treats innovation as the successful

  20. Estimate of Maximum Underground Working Gas Storage Capacity in the United States: 2007 Update

    Reports and Publications (EIA)

    2007-01-01

    This report provides an update to an estimate for U.S. aggregate natural gas storage capacity that was released in 2006.