National Library of Energy BETA

Sample records for inclusion microthermometry stable

  1. Evolution of the Geysers (US) - Data From Fluid-Inclusion Microthermometry and Gas Geochemistry

    SciTech Connect (OSTI)

    Moore, J.N.; Hulen, J.B.; Norman, D.I.

    1995-01-01

    The Geysers, California, is the site of an active hydrothermal system that initially developed between about 1.5 and 2 Ma in response to intrusion of a hypabyssal granitic pluton. Mineralogic and fluid-inclusion data demonstrate that the present vapor-dominated regime evolved from an earlier and more extensive, liquid-dominated hydrothermal system. Circulation of these early fluids produced veins characterized by tourmaline and/or biotite {+-} actinolite {+-} clinopyroxene within the pluton and adjacent biotite-rich hornfels, actinolite {+-} ferroaxinite {+-} epidote, and epidote {+-} chlorite {+-} wairakite within the intermediate parts of the thermal system, and calcite in the outer parts. Potassium feldspar and quartz are present in all assemblages. Maximum pressure-corrected homogenization temperatures and apparent salinities of fluid-inclusions in these veins range from 440 C and 44 weight percent NaCl equivalent within the hornfels (<600 m from the pluton) to 325 C and 5 weight percent NaCl equivalent at approximately 1500 m from the intrusion. We suggest that the shallow, moderate-salinity fluids are crustal waters modified by water-rock interactions and that the high-salinity fluids are magmatic brines. The formation of vapor-dominated conditions is reflected in the abrupt appearance of low salinity (0.0 to 0.4 weight percent NaCl equivalent) fluid inclusions with homogenization temperatures near 265 C. These inclusion fluids are thought to represent steam condensate formed as the liquid-dominated system boiled off.

  2. Microthermometry of Fluid Inclusions from the VC-1 Core Hole...

    Open Energy Info (EERE)

    the present temperature regime is comparable in composition to those from the Baca geothermal field inside the caldera and to those from hot springs in San Diego Canyon....

  3. Diversity, Inclusion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workplace Diversity, Inclusion Diversity, Inclusion Explore the multiple dimensions of a career at Los Alamos Lab: work with the best minds on the planet in an inclusive...

  4. Geology, hydrothermal petrology, stable isotope geochemistry, and fluid inclusion geothermometry of LASL geothermal test well C/T-1 (Mesa 31-1), East Mesa, Imperial Valley, California, USA

    SciTech Connect (OSTI)

    Miller, K.R.; Elders, W.A.

    1980-08-01

    Borehole Mesa 31-1 (LASL C/T-1) is an 1899-m (6231-ft) deep well located in the northwestern part of the East Mesa Geothermal Field. Mesa 31-1 is the first Calibration/Test Well (C/T-1) in the Los Alamos Scientific Laboratory (LASL), Geothermal Log Interpretation Program. The purpose of this study is to provide a compilation of drillhole data, drill cuttings, well lithology, and formation petrology that will serve to support the use of well LASL C/T-1 as a calibration/test well for geothermal logging. In addition, reviews of fluid chemistry, stable isotope studies, isotopic and fluid inclusion geothermometry, and the temperature log data are presented. This study provides the basic data on the geology and hydrothermal alteration of the rocks in LASL C/T-1 as background for the interpretation of wireline logs.

  5. Fluid Inclusion Gas Analysis

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Dilley, Lorie

    2013-01-01

    Fluid inclusion gas analysis for wells in various geothermal areas. Analyses used in developing fluid inclusion stratigraphy for wells and defining fluids across the geothermal fields. Each sample has mass spectrum counts for 180 chemical species.

  6. Fluid Inclusion Gas Analysis

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Dilley, Lorie

    Fluid inclusion gas analysis for wells in various geothermal areas. Analyses used in developing fluid inclusion stratigraphy for wells and defining fluids across the geothermal fields. Each sample has mass spectrum counts for 180 chemical species.

  7. Diversity and Inclusion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inclusion Diversity and Inclusion At Los Alamos, you will work with the best minds on the planet in an inclusive environment rich in intellectual vitality and opportunity for growth. African-American Partner Program African-American Partner Program African-American graduate interns help solve national challenges in their science, technology, engineering, or math disciplines. READ MORE Michael Torrez Employee Spotlight: Michael Torrez Research technologist enjoys spending his free time tracing

  8. Diversity and Inclusion Guidance

    Broader source: Energy.gov [DOE]

    All DOE diversity and inclusion policies, practices and programs must comply with Federal Equal Employment Opportunity laws, Merit Systems Principles, the foundation of the Civil Service, and not...

  9. Diversity and Inclusion Related Documents

    Broader source: Energy.gov [DOE]

    The Office of Diversity and Inclusion fosters a diverse and inclusive work environment that ensures equality of opportunity for applicants and employees through Departmental diversity policy...

  10. Inclusive and Exclusive |Vub|

    SciTech Connect (OSTI)

    Petrella, Antonio; /Ferrara U. /INFN, Ferrara

    2011-11-17

    The current status of the determinations of CKM matrix element |V{sub ub}| via exclusive and inclusive charmless semileptonic B decays is reviewed. The large datasets collected at the B-Factories, and the increased precision of theoretical calculations have allowed an improvement in the determination of |V{sub ub}|. However, there are still significant uncertainties. In the exclusive approach, the most precise measurement of the pion channel branching ratio is obtained by an untagged analysis. This very good precision can be reached by tagged analyses with more data. The problem with exclusive decays is that the strong hadron dynamics can not be calculated from first principles and the determination of the form factor has to rely on light-cone sum rules or lattice QCD calculations. The current data samples allow a comparison of different FF models with data distributions. With further developments on lattice calculations, the theoretical error should shrink to reach the experimental one. The inclusive approach still provides the most precise |V{sub ub}| determinations. With new theoretical calculations, the mild (2.5{sigma}) discrepancy with respect to the |V{sub ub}| value determined from the global UT fit has been reduced. As in the exclusive approach, theoretical uncertainties represent the limiting factor to the precision of the measurement. Reducing the theoretical uncertainties to a level comparable with the statistical error is challenging. New measurements in semileptonic decays of charm mesons could increase the confidence in theoretical calculations and related uncertainties.

  11. Methodologies for Reservoir Characterization Using Fluid Inclusion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Methodologies for Reservoir Characterization Using Fluid Inclusion Gas Chemistry Methodologies for Reservoir Characterization Using Fluid Inclusion Gas Chemistry Methodologies for ...

  12. Stable isotope enrichment

    SciTech Connect (OSTI)

    Egle, Brian

    2014-07-14

    Brian Egle is working to increase the nation's capacity to produce stable isotopes for use including medicine, industry and national security.

  13. Stable isotope enrichment

    ScienceCinema (OSTI)

    Egle, Brian

    2014-07-15

    Brian Egle is working to increase the nation's capacity to produce stable isotopes for use including medicine, industry and national security.

  14. Diversity & Inclusion | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8, 2015 Employee Spotlight: Muge Acik November 17, 2015 Employee Spotlight: Peter Friedman September 25, 2015 Diversity & Inclusion Argonne is home to a vibrant, diverse...

  15. Residential propane prices stable

    U.S. Energy Information Administration (EIA) Indexed Site

    propane prices stable The average retail price for propane is 2.37 per gallon. That's down 4-tenths of a penny from a week ago, based on the U.S. Energy Information ...

  16. Diversity and Inclusion | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inclusion Diversity and Inclusion Diversity and Inclusion The Office of Diversity and Inclusion fosters a diverse and inclusive work environment that ensures equality of opportunity for applicants and employees through Departmental diversity policy development, workforce analysis, outreach, retention, and education. We seek to capitalize on the diverse attributes of the nation today to build an inclusive Energy Department for tomorrow. The Energy Department strives to be the Federal government's

  17. Stable Boundary Layer Education (STABLE) Final Campaign Summary...

    Office of Scientific and Technical Information (OSTI)

    Title: Stable Boundary Layer Education (STABLE) Final ... and Environmental Research (BER) (SC-23) Country of Publication: United States Language: English Subject: 47 ...

  18. Diversity and Inclusion | Careers | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Diversity and Inclusion NREL's world-class staff bring knowledge and expertise from across the globe. Our diverse backgrounds enable the laboratory to create clean energy solutions built upon a wide range of experiences and ideas. At NREL, we believe that fostering an inclusive work environment maximizes the unique talents of every NREL employee-regardless of race, sex, gender, religion, or nationality. Today's energy challenges are dynamic and far-reaching, and they demand greater integration

  19. Stable isotope studies

    SciTech Connect (OSTI)

    Ishida, T.

    1992-01-01

    The research has been in four general areas: (1) correlation of isotope effects with molecular forces and molecular structures, (2) correlation of zero-point energy and its isotope effects with molecular structure and molecular forces, (3) vapor pressure isotope effects, and (4) fractionation of stable isotopes. 73 refs, 38 figs, 29 tabs.

  20. Stable Boundary Layer Education (STABLE) Final Campaign Summary (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Stable Boundary Layer Education (STABLE) Final Campaign Summary Citation Details In-Document Search Title: Stable Boundary Layer Education (STABLE) Final Campaign Summary The properties of, and the processes that occur in, the nocturnal stable boundary layer are not well understood, making it difficult to represent adequately in numerical models. The nocturnal boundary layer often is characterized by a temperature inversion and, in the Southern Great Plains region,

  1. Stable glow discharge detector

    DOE Patents [OSTI]

    Koo, Jackson C.; Yu, Conrad M.

    2004-05-18

    A highly sensitive electronic ion cell for the measurement of trace elements in He carrier gas which involves glow discharge. A constant wave (CW) stable glow discharge detector which is controlled through a biased resistor, can detect the change of electron density caused by impurities in the He carrier gas by many orders of magnitude larger than that caused by direct ionization or electron capture. The stable glow discharge detector utilizes a floating pseudo-electrode to form a probe in or near the plasma and a solid rod electrode. By using this probe, the large variation of electron density due to trace amounts of impurities can be directly measured. The solid rod electrode provides greater stability and thus easier alignment.

  2. Bi-stable optical actuator

    DOE Patents [OSTI]

    Holdener, Fred R. (Tracy, CA); Boyd, Robert D. (Livermore, CA)

    2000-01-01

    The present invention is a bi-stable optical actuator device that is depowered in both stable positions. A bearing is used to transfer motion and smoothly transition from one state to another. The optical actuator device may be maintained in a stable position either by gravity or a restraining device.

  3. Diversity and Inclusion redux | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Diversity and Inclusion redux Diversity and Inclusion redux February 11, 2015 You will recall that in the fall of 2015, I wrote a Montage about the intent to develop an Integrated Diversity and Inclusion program. The Diversity and Inclusion Council, under Chairpersons Mary Logue and Rolf Ent, has been working in collaboration with the Public Affairs office on several initiatives, which will soon go public. One of the very interesting but pernicious effects which, to a greater or lesser degree,

  4. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1980-12-01

    This report contains a listing of electromagnetically separated stable isotopes which are available for distribution within the United States for non-destructive research use from the Oak Ridge National Laboratory on a loan basis. This inventory includes all samples of stable isotopes in the Materials Research Collection and does not designate whether a sample is out on loan or in reprocessing.

  5. Ultratough, Thermally Stable Polycrystalline Diamond/Silicon...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ultratough, Thermally Stable Polycrystalline DiamondSilicon Carbide Nanocomposites for Drill Bits Ultratough, Thermally Stable Polycrystalline DiamondSilicon Carbide ...

  6. DISPLAYING AND INTERPRETING FLUID INCLUSION STRATIGRAPHY ANALYSES...

    Open Energy Info (EERE)

    DISPLAYING AND INTERPRETING FLUID INCLUSION STRATIGRAPHY ANALYSES ON MUDLOG GRAPHS Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings:...

  7. NMR Spectroscopic Investigation of Inclusion Complexes between...

    Office of Scientific and Technical Information (OSTI)

    NMR Spectroscopic Investigation of Inclusion Complexes between Cyclodextrins and the Neurotoxin Tetramethylenedisulfotetramine (TETS) Citation Details In-Document Search Title: NMR ...

  8. Stable Spheromaks with Profile Control

    SciTech Connect (OSTI)

    Fowler, T K; Jayakumar, R

    2008-01-29

    A spheromak equilibrium with zero edge current is shown to be stable to both ideal MHD and tearing modes that normally produce Taylor relaxation in gun-injected spheromaks. This stable equilibrium differs from the stable Taylor state in that the current density j falls to zero at the wall. Estimates indicate that this current profile could be sustained by non-inductive current drive at acceptable power levels. Stability is determined using the NIMROD code for linear stability analysis. Non-linear NIMROD calculations with non-inductive current drive could point the way to improved fusion reactors.

  9. Unexpected Stable Two-dimensional ...

    Office of Scientific and Technical Information (OSTI)

    Unexpected Stable Two-dimensional Silicon Phosphides with Different Stoichiometries Bing Huang1, Houlong Zhuang1, Mina Yoon1, Su-Huai Wei2, and Bobby G. Sumpter1 1 Center for ...

  10. NMR Spectroscopic Investigation of Inclusion Complexes between

    Office of Scientific and Technical Information (OSTI)

    Cyclodextrins and the Neurotoxin Tetramethylenedisulfotetramine (TETS) (Journal Article) | SciTech Connect Journal Article: NMR Spectroscopic Investigation of Inclusion Complexes between Cyclodextrins and the Neurotoxin Tetramethylenedisulfotetramine (TETS) Citation Details In-Document Search Title: NMR Spectroscopic Investigation of Inclusion Complexes between Cyclodextrins and the Neurotoxin Tetramethylenedisulfotetramine (TETS) Authors: Mayer, B P ; Albo, R F ; Hok, S ; Valdez, C A

  11. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1988-02-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high-abundance, naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  12. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1982-01-01

    This report contains a listing of electromagnetically separated stable isotopes which are available for distribution within the United States for nondestructive research use from the Oak Ridge National Laboratory on a loan basis. This inventory includes all samples of stable isotopes in the Material Research Collection and does not designate whether a sample is out on loan or in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  13. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1984-03-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  14. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    This report contains a listing of electromagnetically separated stable isotopes which are available for distribution within the United States for non-destructive research use from the Oak Ridge National Laboratory on a loan basis. This inventory includes all samples of stable isotopes in the Materials Research Collection and does not designate whether a sample is out on loan or in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  15. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1983-03-01

    This report contains a listing of electromagnetically separated stable isotopes which are available for distribution within the United States for non-destructive research use from the Oak Ridge National Laboratory on a loan basis. This inventory includes all samples of stable isotopes in the Materials Research Collection and does not designate whether a sample is out on loan or in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  16. Diversity & Inclusion at Argonne | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Diversity & Inclusion at Argonne Share Duration 2:50 Topic Operations Human Resources Diversity Argonne Diversity & Inclusion Advisory Council members discuss the value and importance of a diverse and inclusive workplace

  17. Diversity and Inclusion | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Diversity and Inclusion Argonne is home to a vibrant, diverse community. When we bring together groups of people whose cultural and intellectual backgrounds equip them to look at a...

  18. Integrated Diversity and Inclusion Management! | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integrated Diversity and Inclusion Management! Integrated Diversity and Inclusion Management! September 8, 2015 Those of us who are moderately long in the tooth remember the bad old days of (un)safety. One occasion that I recall involved siphoning liquid scintillator with a rubber tube and a mouth, mine. Another was the inappropriate use of magnetic tools in a magnetic field. All that has changed; we are now proud of a safety record and performance, which limits the accidents that do damage to

  19. Diversity & Inclusion FAQs | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FAQs Q. How does diversity and inclusion fit with Argonne's values? A. Argonne values excellence in science and engineering, and it values the contributions that individuals make. The lab strongly encourages collaboration for the simple reason that scientific innovation is more likely to occur when individuals with diverse viewpoints, approaches, methodologies and backgrounds work together to solve a problem. In this, our collective diversity and an inclusive culture add value to scientific

  20. Government-Wide Diversity and Inclusion Strategic Plan (2011...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of Personnel Management Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of Personnel ...

  1. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1985-02-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for non-destructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, /sup 40/Ca and /sup 56/Fe. All request for the loan of samples should be submitted with a summary of the purpose of the loan to: Isotope Distribution Office, Oak Ridge National Laboratory, P.O. Box X, Oak Ridge, Tennessee 37831. Requests from non-DOE contractors and from foreign institutions require DOE approval.

  2. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1986-08-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high-abundance, naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56. All requests for the loan of samples should be submitted with a summary of the purpose of the loan to: Iotope Distribution Office, Oak Ridge National Laboratory, P.O. Box X, Oak Ridge, Tennessee 37831. Requests from non-DOE contractors and from foreign institutions require DOE approval.

  3. Phase stable RF transport system

    DOE Patents [OSTI]

    Curtin, Michael T.; Natter, Eckard F.; Denney, Peter M.

    1992-01-01

    An RF transport system delivers a phase-stable RF signal to a load, such as an RF cavity of a charged particle accelerator. A circuit generates a calibration signal at an odd multiple frequency of the RF signal where the calibration signal is superimposed with the RF signal on a common cable that connects the RF signal with the load. Signal isolating diplexers are located at both the RF signal source end and load end of the common cable to enable the calibration to be inserted and extracted from the cable signals without any affect on the RF signal. Any phase shift in the calibration signal during traverse of the common cable is then functionally related to the phase shift in the RF signal. The calibration phase shift is used to control a phase shifter for the RF signal to maintain a stable RF signal at the load.

  4. Advanced Thermally Stable Jet Fuels

    SciTech Connect (OSTI)

    A. Boehman; C. Song; H. H. Schobert; M. M. Coleman; P. G. Hatcher; S. Eser

    1998-01-01

    The Penn State program in advanced thermally stable jet fuels has five components: 1) development of mechanisms of degradation and solids formation; 2) quantitative measurement of growth of sub-micrometer and micrometer-sized particles during thermal stressing; 3) characterization of carbonaceous deposits by various instrumental and microscopic methods; 4) elucidation of the role of additives in retarding the formation of carbonaceous solids; and 5) assessment of the potential of producing high yields of cycloalkanes and hydroaromatics from coal.

  5. Diesel prices remain fairly stable

    U.S. Energy Information Administration (EIA) Indexed Site

    Diesel prices remain fairly stable The U.S. average retail price for on-highway diesel fuel slightly fell to $3.85 a gallon on Monday. That's down 6-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Diesel prices were highest in the New England region at 3.99 a gallon, down 7-tenths of a penny from a week ago. Prices were lowest in the Gulf Coast region at 3.74 a gallon, down 2.2 cents

  6. Dimensionally stable metallic hydride composition

    DOE Patents [OSTI]

    Heung, Leung K.

    1994-01-01

    A stable, metallic hydride composition and a process for making such a composition. The composition comprises a uniformly blended mixture of a metal hydride, kieselguhr, and a ballast metal, all in the form of particles. The composition is made by subjecting a metal hydride to one or more hydrogen absorption/desorption cycles to disintegrate the hydride particles to less than approximately 100 microns in size. The particles are partly oxidized, then blended with the ballast metal and the kieselguhr to form a uniform mixture. The mixture is compressed into pellets and calcined. Preferably, the mixture includes approximately 10 vol. % or more kieselguhr and approximately 50 vol. % or more ballast. Metal hydrides that can be used in the composition include Zr, Ti, V, Nb, Pd, as well as binary, tertiary, and more complex alloys of La, Al, Cu, Ti, Co, Ni, Fe, Zr, Mg, Ca, Mn, and mixtures and other combinations thereof. Ballast metals include Al, Cu and Ni.

  7. A Fluid-Inclusion Investigation Of The Tongonan Geothermal Field...

    Open Energy Info (EERE)

    Fluid-Inclusion Investigation Of The Tongonan Geothermal Field, Philippines Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: A Fluid-Inclusion...

  8. Office of Personnel Management (OPM) Guidance on Diversity and Inclusion |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Office of Personnel Management (OPM) Guidance on Diversity and Inclusion Office of Personnel Management (OPM) Guidance on Diversity and Inclusion The following documents are from the Office of Personnel Management (OMP)'s Office of Diversity and Inclusion, which is responsible for reviewing and evaluating plans, reports, and programs for conformance with various laws, regulations, and directives relating to diversity and inclusion. Governement-Wide Diversity and

  9. Advanced thermally stable jet fuels

    SciTech Connect (OSTI)

    Schobert, H.H.

    1999-01-31

    The Pennsylvania State University program in advanced thermally stable coal-based jet fuels has five broad objectives: (1) Development of mechanisms of degradation and solids formation; (2) Quantitative measurement of growth of sub-micrometer and micrometer-sized particles suspended in fuels during thermal stressing; (3) Characterization of carbonaceous deposits by various instrumental and microscopic methods; (4) Elucidation of the role of additives in retarding the formation of carbonaceous solids; (5) Assessment of the potential of production of high yields of cycloalkanes by direct liquefaction of coal. Future high-Mach aircraft will place severe thermal demands on jet fuels, requiring the development of novel, hybrid fuel mixtures capable of withstanding temperatures in the range of 400--500 C. In the new aircraft, jet fuel will serve as both an energy source and a heat sink for cooling the airframe, engine, and system components. The ultimate development of such advanced fuels requires a thorough understanding of the thermal decomposition behavior of jet fuels under supercritical conditions. Considering that jet fuels consist of hundreds of compounds, this task must begin with a study of the thermal degradation behavior of select model compounds under supercritical conditions. The research performed by The Pennsylvania State University was focused on five major tasks that reflect the objectives stated above: Task 1: Investigation of the Quantitative Degradation of Fuels; Task 2: Investigation of Incipient Deposition; Task 3: Characterization of Solid Gums, Sediments, and Carbonaceous Deposits; Task 4: Coal-Based Fuel Stabilization Studies; and Task 5: Exploratory Studies on the Direct Conversion of Coal to High Quality Jet Fuels. The major findings of each of these tasks are presented in this executive summary. A description of the sub-tasks performed under each of these tasks and the findings of those studies are provided in the remainder of this volume (Sections 1 through 5).

  10. Stable Flats LLC | Open Energy Information

    Open Energy Info (EERE)

    to build the first multi-family LEED (Leadership in Energy & Environmental Design) Gold certified structure in the country. References: Stable Flats LLC1 This article is a...

  11. Semiconducting glasses with flux pinning inclusions

    DOE Patents [OSTI]

    Johnson, William L.; Poon, Siu-Joe; Duwez, Pol E.

    1981-01-01

    A series of amorphous superconducting glassy alloys containing 1% to 10% by volume of flux pinning crystalline inclusions have been found to have potentially useful properties as high field superconducting magnet materials. The alloys are prepared by splat cooling by the piston and anvil technique. The alloys have the composition (TM).sub.90-70 (M).sub.10-30 where TM is a transition metal selected from at least one metal of Groups IVB, VB, VIB, VIIB or VIIIB of the Periodic Table such as Nb, Mo, Ru, Zr, Ta, W or Re and M is at least one metalloid such as B, P, C, N, Si, Ge or Al.

  12. Inclusive Inelastic Electron Scattering from Nuclei

    SciTech Connect (OSTI)

    Fomin, Nadia

    2007-10-26

    Inclusive electron scattering from nuclei at large x and Q{sup 2} is the result of a reaction mechanism that includes both quasi-elastic scattering from nucleons and deep inelastic scattering from the quark consitituents of the nucleons. Data in this regime can be used to study a wide variety of topics, including the extraction of nuclear momentum distributions, the infiuence of final state interactions and the approach to y-scaling, the strength of nucleon-nucleon correlations, and the approach to x-scaling, to name a few. Selected results from the recent experiment E02-019 at the Thomas Jefferson National Accelerator Facility will be shown and their relevance discussed.

  13. Inclusive radiative {psi}(2S) decays

    SciTech Connect (OSTI)

    Libby, J.; Martin, L.; Powell, A.; Thomas, C.; Wilkinson, G.; Mendez, H.; Ge, J. Y.; Miller, D. H.; Shipsey, I. P. J.; Xin, B.; Adams, G. S.; Hu, D.; Moziak, B.; Napolitano, J.; Ecklund, K. M.; He, Q.; Insler, J.; Muramatsu, H.; Park, C. S.; Thorndike, E. H.

    2009-10-01

    Using e{sup +}e{sup -} collision data taken with the CLEO-c detector at the Cornell Electron Storage Ring, we have investigated the direct photon spectrum in the decay {psi}(2S){yields}{gamma}gg. We determine the ratio of the inclusive direct photon decay rate to that of the dominant three-gluon decay rate {psi}(2S){yields}ggg (R{sub {gamma}}{identical_to}{gamma}({gamma}gg)/{gamma}(ggg)) to be R{sub {gamma}}(z{sub {gamma}}>0.4)=0.070{+-}0.002{+-}0.019{+-}0.011, with z{sub {gamma}} defined as the scaled photon energy relative to the beam energy. The errors shown are statistical, systematic, and that due to the uncertainty in the input branching fractions used to extract the ratio, respectively.

  14. Bi-stable optical element actuator device

    DOE Patents [OSTI]

    Holdener, Fred R.; Boyd, Robert D.

    2002-01-01

    The present invention is a bistable optical element actuator device utilizing a powered means to move an actuation arm, to which an optical element is attached, between two stable positions. A non-powered means holds the actuation arm in either of the two stable positions. The optical element may be a electromagnetic (EM) radiation or particle source, an instrument, or EM radiation or particle transmissive reflective or absorptive elements. A bearing is used to transfer motion and smoothly transition the actuation arm between the two stable positions.

  15. Enhanced Inclusion Removal from Steel in the Tundish

    SciTech Connect (OSTI)

    R. C. Bradt; M.A.R. Sharif

    2009-09-25

    The objective of this project was to develop an effective chemical filtering system for significantly reducing the content of inclusion particles in the steel melts exiting the tundish for continuous casting. This project combined a multi-process approach that aimed to make significant progress towards an "inclusion free" steel by incorporating several interdependent concepts to reduce the content of inclusions in the molten steel exiting the tundish for the caster. The goal is to produce "cleaner" steel.

  16. Diversity and Inclusion Strategic Plan 2012 - 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategic Plan 2012 - 2015 Diversity and Inclusion Strategic Plan 2012 - 2015 Our Diversity and Inclusion Strategic Plan is designed to create a culture which values trust and human dignity and provides the opportunity for personal development and self- fulfillment in the attainment of DOE's mission and goals. The 2012- 2015 strategic plan has three essential pillars - mission focus, accountability, and continual learning. It also: Creates a universal definition of diversity and inclusion.

  17. Diversity and Inclusion Town Hall Program Book | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Town Hall Program Book Diversity and Inclusion Town Hall Program Book As part of a larger effort to create a culture that values diversity, we have been conducting focus groups to engage in a dialog and hear feedback on how diversity can be improved. At the Town Hall, DOE employees will hear the results of these discussions. View the program booklet from the Diversity and Inclusion Town Hall below. For more information about the Department's diversity and inclusion programs, visit

  18. Fluid Inclusion Analysis At Geysers Geothermal Area (1990) |...

    Open Energy Info (EERE)

    Geothermal Area (1990) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Geysers Geothermal Area (1990) Exploration...

  19. Fluid Inclusion Analysis At Coso Geothermal Area (2002) | Open...

    Open Energy Info (EERE)

    2) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Coso Geothermal Area (2002) Exploration Activity Details Location...

  20. Fluid Inclusion Analysis At Chena Geothermal Area (Kolker, 2008...

    Open Energy Info (EERE)

    Chena Geothermal Area (Kolker, 2008) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Chena Geothermal Area (Kolker,...

  1. 36 CFR 63: Determinations of Eligibility for Inclusion in the...

    Open Energy Info (EERE)

    63: Determinations of Eligibility for Inclusion in the National Register of Historic Places Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

  2. Fluid Inclusion Analysis At Salton Sea Geothermal Area (1990...

    Open Energy Info (EERE)

    Salton Sea Geothermal Area (1990) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Salton Sea Geothermal Area (1990)...

  3. Fluid Inclusion Analysis At Yellowstone Region (Sturchio, Et...

    Open Energy Info (EERE)

    Yellowstone Region (Sturchio, Et Al., 1990) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Yellowstone Region...

  4. Fluid Inclusion Analysis At Coso Geothermal Area (1990) | Open...

    Open Energy Info (EERE)

    0) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Coso Geothermal Area (1990) Exploration Activity Details Location...

  5. Fluid Inclusion Analysis At Valles Caldera - Redondo Geothermal...

    Open Energy Info (EERE)

    Redondo Geothermal Area (Sasada, 1988) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Valles Caldera - Redondo...

  6. Fluid Inclusion Analysis At Valles Caldera Geothermal Region...

    Open Energy Info (EERE)

    Geothermal Region (1990) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Valles Caldera Geothermal Region (1990)...

  7. Fluid-inclusion evidence for past temperature fluctuations in...

    Open Energy Info (EERE)

    of the inclusion fluids range from dilute meteoric water to highly modified sea water concentrated by boiling. Comparison of measured drill-hole temperatures with...

  8. Fluid Inclusion Analysis At Raft River Geothermal Area (2011...

    Open Energy Info (EERE)

    Raft River Geothermal Area (2011) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Raft River Geothermal Area (2011)...

  9. Fluid Inclusion Analysis At Lightning Dock Area (Norman & Moore...

    Open Energy Info (EERE)

    Lightning Dock Area (Norman & Moore, 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Lightning Dock Area...

  10. Fluid Inclusion Analysis At Coso Geothermal Area (1996) | Open...

    Open Energy Info (EERE)

    that the interior of the system is still undergoing heating. References Lutz, S. J.; Moore, J. N.; Copp, J. F. (24 January 1996) Integrated mineralogical and fluid inclusion...

  11. Fluid Inclusion Analysis At Geysers Area (Moore, Et Al., 2001...

    Open Energy Info (EERE)

    Area (Moore, Et Al., 2001) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Geysers Area (Moore, Et Al., 2001)...

  12. Fluid Inclusion Analysis At Valles Caldera - Sulphur Springs...

    Open Energy Info (EERE)

    Sulphur Springs Geothermal Area (Sasada & Goff, 1995) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Valles Caldera...

  13. Integrated mineralogical and fluid inclusion study of the Coso...

    Open Energy Info (EERE)

    inclusion homogenization temperatures and salinities demonstrate that cool, low salinity ground waters were present when the thermal plume was emplaced. Dilution of the thermal...

  14. Methodologies for Reservoir Characterization Using Fluid Inclusion Gas Chemistry

    Broader source: Energy.gov [DOE]

    Methodologies for Reservoir Characterization Using Fluid Inclusion Gas Chemistry presentation at the April 2013 peer review meeting held in Denver, Colorado.

  15. Fluid Inclusion Stratigraphy Interpretation of New Wells in the...

    Open Energy Info (EERE)

    Stratigraphy Interpretation of New Wells in the Coso Geothermal Field Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Fluid Inclusion...

  16. Stable Boundary Layer Education Field Campaign Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Stable Boundary Layer Education (STABLE) Final Campaign Summary DD Turner March 2016 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe

  17. Inclusive radiative J/{psi} decays

    SciTech Connect (OSTI)

    Besson, D.; Pedlar, T. K.; Cronin-Hennessy, D.; Gao, K. Y.; Hietala, J.; Kubota, Y.; Klein, T.; Lang, B. W.; Poling, R.; Scott, A. W.; Zweber, P.; Dobbs, S.; Metreveli, Z.; Seth, K. K.; Tomaradze, A.; Libby, J.; Powell, A.; Wilkinson, G.; Ecklund, K. M.; Love, W.

    2008-08-01

    Using data taken with the CLEO-c detector at the Cornell Electron Storage Ring, we have investigated the direct-photon momentum spectrum in the decay J/{psi}(1S){yields}{gamma}gg, via the ''tagged'' process: e{sup +}e{sup -}{yields}{psi}(2S); {psi}(2S){yields}J/{psi}{pi}{sup +}{pi}{sup -}; J/{psi}{yields}{gamma}+X. Including contributions from two-body radiative decay processes, we find the ratio of the inclusive direct-photon branching fraction to that of the dominant three-gluon branching fraction [R{sub {gamma}}=B(gg{gamma})/B(ggg)] to be R{sub {gamma}}=0.137{+-}0.001{+-}0.016{+-}0.004, where the errors shown are statistical, systematic, and the model-dependent uncertainty related to the extrapolation to zero photon energy. The shape of the scaled photon energy spectrum in J/{psi}{yields}gg{gamma} is observed to be very similar to that of {upsilon}{yields}gg{gamma}. The R{sub {gamma}} value obtained is roughly consistent with that expected by a simple quark-charge scaling [R{sub {gamma}}{approx}(q{sub c}/q{sub b}){sup 2}] of the value determined at the {upsilon}(1S), but somewhat higher than the value expected from the running of the strong coupling constant.

  18. Stable Isotope Enrichment Capabilities at ORNL

    SciTech Connect (OSTI)

    Egle, Brian; Aaron, W Scott; Hart, Kevin J

    2013-01-01

    The Oak Ridge National Laboratory (ORNL) and the US Department of Energy Nuclear Physics Program have built a high-resolution Electromagnetic Isotope Separator (EMIS) as a prototype for reestablishing a US based enrichment capability for stable isotopes. ORNL has over 60 years of experience providing enriched stable isotopes and related technical services to the international accelerator target community, as well as medical, research, industrial, national security, and other communities. ORNL is investigating the combined use of electromagnetic and gas centrifuge isotope separation technologies to provide research quantities (milligram to several kilograms) of enriched stable isotopes. In preparation for implementing a larger scale production facility, a 10 mA high-resolution EMIS prototype has been built and tested. Initial testing of the device has simultaneously collected greater than 98% enriched samples of all the molybdenum isotopes from natural abundance feedstock.

  19. Low work function, stable thin films

    DOE Patents [OSTI]

    Dinh, Long N.; McLean, II, William; Balooch, Mehdi; Fehring, Jr., Edward J.; Schildbach, Marcus A.

    2000-01-01

    Generation of low work function, stable compound thin films by laser ablation. Compound thin films with low work function can be synthesized by simultaneously laser ablating silicon, for example, and thermal evaporating an alkali metal into an oxygen environment. For example, the compound thin film may be composed of Si/Cs/O. The work functions of the thin films can be varied by changing the silicon/alkali metal/oxygen ratio. Low work functions of the compound thin films deposited on silicon substrates were confirmed by ultraviolet photoelectron spectroscopy (UPS). The compound thin films are stable up to 500.degree. C. as measured by x-ray photoelectron spectroscopy (XPS). Tests have established that for certain chemical compositions and annealing temperatures of the compound thin films, negative electron affinity (NEA) was detected. The low work function, stable compound thin films can be utilized in solar cells, field emission flat panel displays, electron guns, and cold cathode electron guns.

  20. PROJECT PROFILE: Stable Perovskite Solar Cells via Chemical Vapor...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Stable Perovskite Solar Cells via Chemical Vapor Deposition PROJECT PROFILE: Stable Perovskite Solar Cells via Chemical Vapor Deposition Funding Opportunity: SuNLaMP SunShot ...

  1. Extremely stable bare hematite photoanode for solar water splitting...

    Office of Scientific and Technical Information (OSTI)

    Extremely stable bare hematite photoanode for solar water splitting Prev Next Title: Extremely stable bare hematite photoanode for solar water splitting Authors: Dias, Paula ; ...

  2. Stable Free Radicals and Potential Implications for Health Effects...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Stable Free Radicals and Potential Implications for Health Effects of Diesel Emissions Stable Free Radicals and Potential Implications for Health Effects of Diesel Emissions 2005 ...

  3. Stable magnesium peroxide at high pressure (Journal Article)...

    Office of Scientific and Technical Information (OSTI)

    Stable magnesium peroxide at high pressure Citation Details In-Document Search Title: Stable magnesium peroxide at high pressure Authors: Lobanov, Sergey S. ; Zhu, Qiang ; ...

  4. Method for locating metallic nitride inclusions in metallic alloy ingots

    DOE Patents [OSTI]

    White, Jack C.; Traut, Davis E.; Oden, Laurance L.; Schmitt, Roman A.

    1992-01-01

    A method of determining the location and history of metallic nitride and/or oxynitride inclusions in metallic melts. The method includes the steps of labeling metallic nitride and/or oxynitride inclusions by making a coreduced metallic-hafnium sponge from a mixture of hafnium chloride and the chloride of a metal, reducing the mixed chlorides with magnesium, nitriding the hafnium-labeled metallic-hafnium sponge, and seeding the sponge to be melted with hafnium-labeled nitride inclusions. The ingots are neutron activated and the hafnium is located by radiometric means. Hafnium possesses exactly the proper metallurgical and radiochemical properties for this use.

  5. Dynamically stable magnetic suspension/bearing system

    DOE Patents [OSTI]

    Post, Richard F.

    1996-01-01

    A magnetic bearing system contains magnetic subsystems which act together to support a rotating element in a state of dynamic equilibrium. However, owing to the limitations imposed by Earnshaw's Theorem, the magnetic bearing systems to be described do not possess a stable equilibrium at zero rotational speed. Therefore, mechanical stabilizers are provided, in each case, to hold the suspended system in equilibrium until its speed has exceeded a low critical speed where dynamic effects take over, permitting the achievement of a stable equilibrium for the rotating object. A state of stable equilibrium is achieved above a critical speed by use of a collection of passive elements using permanent magnets to provide their magnetomotive excitation. The magnetic forces exerted by these elements, when taken together, levitate the rotating object in equilibrium against external forces, such as the force of gravity or forces arising from accelerations. At the same time, this equilibrium is made stable against displacements of the rotating object from its equilibrium position by using combinations of elements that possess force derivatives of such magnitudes and signs that they can satisfy the conditions required for a rotating body to be stably supported by a magnetic bearing system over a finite range of those displacements.

  6. Dynamically stable magnetic suspension/bearing system

    DOE Patents [OSTI]

    Post, R.F.

    1996-02-27

    A magnetic bearing system contains magnetic subsystems which act together to support a rotating element in a state of dynamic equilibrium. However, owing to the limitations imposed by Earnshaw`s Theorem, the magnetic bearing systems to be described do not possess a stable equilibrium at zero rotational speed. Therefore, mechanical stabilizers are provided, in each case, to hold the suspended system in equilibrium until its speed has exceeded a low critical speed where dynamic effects take over, permitting the achievement of a stable equilibrium for the rotating object. A state of stable equilibrium is achieved above a critical speed by use of a collection of passive elements using permanent magnets to provide their magnetomotive excitation. The magnetic forces exerted by these elements, when taken together, levitate the rotating object in equilibrium against external forces, such as the force of gravity or forces arising from accelerations. At the same time, this equilibrium is made stable against displacements of the rotating object from its equilibrium position by using combinations of elements that possess force derivatives of such magnitudes and signs that they can satisfy the conditions required for a rotating body to be stably supported by a magnetic bearing system over a finite range of those displacements. 32 figs.

  7. Fluid Inclusion Analysis At Coso Geothermal Area (2004) | Open...

    Open Energy Info (EERE)

    DOE-funding Unknown Exploration Basis 1) To determine if analyses of fluid propene and propane species in fluid inclusions can be used to interpret fluid type, history, or process....

  8. Fluid Inclusion Analysis At Coso Geothermal Area (Norman & Moore...

    Open Energy Info (EERE)

    done by our CFS (crushfast-scan) method (Norman 1996) show that chips have a high density of homogeneous fluid inclusions. Analyses were averaged and plotted verses depth, and...

  9. Fluid Inclusion Analysis At Coso Geothermal Area (2004-2005)...

    Open Energy Info (EERE)

    and much fine scale detail when the logs are analyzed in detail. References Dilley, L. M.; Norman, D.I.; Berard, B. (1 January 2004) FLUID INCLUSION STRATIGRAPHY: NEW METHOD...

  10. Inclusive Rates and Spectra of the Lambda, Cascade, and Omega...

    Office of Scientific and Technical Information (OSTI)

    ThesisDissertation: Inclusive Rates and Spectra of the Lambda, Cascade, and Omega ... DOE Contract Number: AC02-76SF00515 Resource Type: ThesisDissertation Research Org: ...

  11. Mary Ann Fresco receives OPM award for creating, fostering inclusive

    National Nuclear Security Administration (NNSA)

    diversity | National Nuclear Security Administration Mary Ann Fresco receives OPM award for creating, fostering inclusive diversity Thursday, February 5, 2015 - 3:16pm Mary Ann Fresco, Senior Advisor to NNSA's Management and Business Office (NA-MB), was recently recognized by the Office of Personnel Management (OPM) for her contributions to creating and fostering inclusive diversity in the federal government. She recently participated in an interagency detail to OPM where she led change and

  12. Bibliographic survey of medium energy inclusive reaction data

    SciTech Connect (OSTI)

    Arthur, E.D.; Madland, D.G.; McClellan, D.M.

    1986-04-01

    A bibliographic survey of inclusive reaction data (experimental and theoretical) for several projectile types having energies between 50 and 1000 MeV has been completed. Approximately one thousand references selected from this survey describe the current state of knowledge for particle-induced inclusive reaction data. The search covered data for the following projectiles: p, d, t, /sup 3/He, /sup 4/He, and lithium ions.

  13. Inclusive decays of {ital B} mesons to charmonium

    SciTech Connect (OSTI)

    Balest, R.; Cho, K.; Ford, W.T.; Johnson, D.R.; Lingel, K.; Lohner, M.; Rankin, P.; Smith, J.G.; Alexander, J.P.; Bebek, C.; Berkelman, K.; Bloom, K.; Browder, T.E.; Cassel, D.G.; Cho, H.A.; Coffman, D.M.; Crowcroft, D.S.; Drell, P.S.; Dumas, D.J.; Ehrlich, R.; Gaidarev, P.; Garcia-Sciveres, M.; Geiser, B.; Gittelman, B.; Gray, S.W.; Hartill, D.L.; Heltsley, B.K.; Henderson, S.; Jones, C.D.; Jones, S.L.; Kandaswamy, J.; Katayama, N.; Kim, P.C.; Kreinick, D.L.; Ludwig, G.S.; Masui, J.; Mevissen, J.; Mistry, N.B.; Ng, C.R.; Nordberg, E.; Patterson, J.R.; Peterson, D.; Riley, D.; Salman, S.; Sapper, M.; Wuerthwein, F.; Avery, P.; Freyberger, A.; Rodriguez, J.; Yang, S.; Yelton, J.; Cinabro, D.; Liu, T.; Saulnier, M.; Wilson, R.; Yamamoto, H.; Bergfeld, T.; Eisenstein, B.I.; Gollin, G.; Ong, B.; Palmer, M.; Selen, M.; Thaler, J.J.; Edwards, K.W.; Ogg, M.; Bellerive, A.; Britton, D.I.; Hyatt, E.R.F.; MacFarlane, D.B.; Patel, P.M.; Spaan, B.; Sadoff, A.J.; Ammar, R.; Baringer, P.; Bean, A.; Besson, D.; Coppage, D.; Copty, N.; Davis, R.; Hancock, N.; Kelly, M.; Kotov, S.; Kravchenko, I.; Kwak, N.; Lam, H.; Kubota, Y.; Lattery, M.; Momayezi, M.; Nelson, J.K.; Patton, S.; Poling, R.; Savinov, V.; Schrenk, S.; Wang, R.; Alam, M.S.; Kim, I.J.; Ling, Z.; Mahmood, A.H.; O`Neill, J.J.; Severini, H.; Sun, C.R.; Wappler, F.; Crawford, G.; Daubenmier, C.M.; Fulton, R.; Fujino, D.; Gan, K.K.; Honscheid, K.; Kagan, H.; Kass, R.; Lee, J.; Sung, M.; White, C.; Wolf, A.; Zoeller, M.M.; Butler, F.; Fu, X.; Nemati, B.; Ross, W.R.; Skubic, P.; Wood, M.; Bishai, M.; Fast, J.; Gerndt, E.; Hinson, J.W.; McIlwain, R.L.; Miao, T.; Miller, D.H.; Modesitt, M.; Payne, D.; Shibata, E.I.; Shipsey, I.P.J.; Wang, P.N.; Battle, M.; Ernst, J.; Gibbons, L.; Kwon, Y.; Roberts, S.; Thorndike, E.H.; Wang, C.H.; Dominick, J.; Lambrecht, M.; Sanghera, S.; Shelkov, V.; Skwarnicki, T.; Stroynowski, R.; Volobouev, I.; Wei, G.; Artuso, M.; Gao, M.; Goldberg, M.; He, D.; Horwitz, N.; Moneti, G.C.; (CLEO Collabor..

    1995-09-01

    We have used the CLEO-II detector at the Cornell Electron Storage Ringe (CESR) to study the inclusive production of charmonium mesons in a sample of 2.15 million {ital B{bar B}} events. We find inclusive branching fractions of (1.12{plus_minus}0.04{plus_minus}0.06)% for {ital B}{r_arrow}{ital J}/{psi}{ital X}, (0.34{plus_minus}0.04{plus_minus}0.03)% for {ital B}{r_arrow}{psi}{prime}{ital X}, and (0.40{plus_minus}0.06{plus_minus}0.04)% for {ital B}{r_arrow}{chi}{sub {ital c}1}{ital X}. We also find some evidence for the inclusive production of {chi}{sub {ital c}2}, and set an upper limit for the branching fraction of the inclusive decay {ital B}{r_arrow}{eta}{sub {ital c}}{ital X} of 0.9% at 90% confidence level. Momentum spectra for inclusive {ital J}/{psi}, {psi}{prime}, and {chi}{sub {ital c}1} production are presented. These measurements are compared to theoretical calculations.

  14. Quantifying uncertainty in stable isotope mixing models

    SciTech Connect (OSTI)

    Davis, Paul; Syme, James; Heikoop, Jeffrey; Fessenden-Rahn, Julianna; Perkins, George; Newman, Brent; Chrystal, Abbey E.; Hagerty, Shannon B.

    2015-05-19

    Mixing models are powerful tools for identifying biogeochemical sources and determining mixing fractions in a sample. However, identification of actual source contributors is often not simple, and source compositions typically vary or even overlap, significantly increasing model uncertainty in calculated mixing fractions. This study compares three probabilistic methods, SIAR [Parnell et al., 2010] a pure Monte Carlo technique (PMC), and Stable Isotope Reference Source (SIRS) mixing model, a new technique that estimates mixing in systems with more than three sources and/or uncertain source compositions. In this paper, we use nitrate stable isotope examples (?15N and ?18O) but all methods tested are applicable to other tracers. In Phase I of a three-phase blind test, we compared methods for a set of six-source nitrate problems. PMC was unable to find solutions for two of the target water samples. The Bayesian method, SIAR, experienced anchoring problems, and SIRS calculated mixing fractions that most closely approximated the known mixing fractions. For that reason, SIRS was the only approach used in the next phase of testing. In Phase II, the problem was broadened where any subset of the six sources could be a possible solution to the mixing problem. Results showed a high rate of Type I errors where solutions included sources that were not contributing to the sample. In Phase III some sources were eliminated based on assumed site knowledge and assumed nitrate concentrations, substantially reduced mixing fraction uncertainties and lowered the Type I error rate. These results demonstrate that valuable insights into stable isotope mixing problems result from probabilistic mixing model approaches like SIRS. The results also emphasize the importance of identifying a minimal set of potential sources and quantifying uncertainties in source isotopic composition as well as demonstrating the value of additional information in reducing the uncertainty in calculated mixing fractions.

  15. Quantifying uncertainty in stable isotope mixing models

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Davis, Paul; Syme, James; Heikoop, Jeffrey; Fessenden-Rahn, Julianna; Perkins, George; Newman, Brent; Chrystal, Abbey E.; Hagerty, Shannon B.

    2015-05-19

    Mixing models are powerful tools for identifying biogeochemical sources and determining mixing fractions in a sample. However, identification of actual source contributors is often not simple, and source compositions typically vary or even overlap, significantly increasing model uncertainty in calculated mixing fractions. This study compares three probabilistic methods, SIAR [Parnell et al., 2010] a pure Monte Carlo technique (PMC), and Stable Isotope Reference Source (SIRS) mixing model, a new technique that estimates mixing in systems with more than three sources and/or uncertain source compositions. In this paper, we use nitrate stable isotope examples (δ15N and δ18O) but all methods testedmore » are applicable to other tracers. In Phase I of a three-phase blind test, we compared methods for a set of six-source nitrate problems. PMC was unable to find solutions for two of the target water samples. The Bayesian method, SIAR, experienced anchoring problems, and SIRS calculated mixing fractions that most closely approximated the known mixing fractions. For that reason, SIRS was the only approach used in the next phase of testing. In Phase II, the problem was broadened where any subset of the six sources could be a possible solution to the mixing problem. Results showed a high rate of Type I errors where solutions included sources that were not contributing to the sample. In Phase III some sources were eliminated based on assumed site knowledge and assumed nitrate concentrations, substantially reduced mixing fraction uncertainties and lowered the Type I error rate. These results demonstrate that valuable insights into stable isotope mixing problems result from probabilistic mixing model approaches like SIRS. The results also emphasize the importance of identifying a minimal set of potential sources and quantifying uncertainties in source isotopic composition as well as demonstrating the value of additional information in reducing the uncertainty in calculated mixing fractions.« less

  16. Color stable manganese-doped phosphors

    DOE Patents [OSTI]

    Lyons, Robert Joseph; Setlur, Anant Achyut; Deshpande, Anirudha Rajendra; Grigorov, Ljudmil Slavchev

    2012-08-28

    A process for preparing color stable Mn.sup.+4 doped phosphors includes providing a phosphor of formula I; A.sub.x[MF.sub.y]:Mn.sup.+4 I and contacting the phosphor in particulate form with a saturated solution of a composition of formula II in aqueous hydrofluoric acid; A.sub.x[MF.sub.y]; II wherein A is Li, Na, K, Rb, Cs, NR.sub.4 or a combination thereof; M is Si, Ge, Sn, Ti, Zr, Al, Ga, In, Sc, Y, La, Nb, Ta, Bi, Gd, or a combination thereof; R is H, lower alkyl, or a combination thereof; x is the absolute value of the charge of the [MF.sub.y] ion; and y is 5, 6 or 7. In particular embodiments, M is Si, Ge, Sn, Ti, Zr, or a combination thereof. A lighting apparatus capable of emitting white light includes a semiconductor light source; and a phosphor composition radiationally coupled to the light source, and which includes a color stable Mn.sup.+4 doped phosphor.

  17. Inclusion in the Workplace - Text Version | Careers | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inclusion in the Workplace - Text Version This is the text version for the Inclusion in the Workplace video. Manajit Sengupta: I work at NREL because of primarily the challenges, the excitement of the work, and the people I work with. Suzy Belmont: When people feel safe and they feel accepted, they're able to bring the best parts of themselves forward, and they're able to bring exciting new ideas forward because they feel like they can fail, they feel like they can try out new things. Bobi

  18. Diversity and Inclusion Events Calendar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diversity and Inclusion Events Calendar Diversity and Inclusion Events Calendar Training, networking, and career-building conferences like the ones below are valuable ways to engage in diversity issues. Learn about upcoming events on the calendar below, and contact us at diversity@hq.doe.gov to let us know about other upcoming events. To learn more about the Department's diversity initiatives, visit this page. May 2016 < prev next > Sun Mon Tue Wed Thu Fri Sat 1 2 3 4 5 6 7 8 9 10 11 12 13

  19. Methodologies for Reservoir Characterization Using Fluid Inclusion Gas Chemistry

    SciTech Connect (OSTI)

    Dilley, Lorie M.

    2015-04-13

    The purpose of this project was to: 1) evaluate the relationship between geothermal fluid processes and the compositions of the fluid inclusion gases trapped in the reservoir rocks; and 2) develop methodologies for interpreting fluid inclusion gas data in terms of the chemical, thermal and hydrological properties of geothermal reservoirs. Phase 1 of this project was designed to conduct the following: 1) model the effects of boiling, condensation, conductive cooling and mixing on selected gaseous species; using fluid compositions obtained from geothermal wells, 2) evaluate, using quantitative analyses provided by New Mexico Tech (NMT), how these processes are recorded by fluid inclusions trapped in individual crystals; and 3) determine if the results obtained on individual crystals can be applied to the bulk fluid inclusion analyses determined by Fluid Inclusion Technology (FIT). Our initial studies however, suggested that numerical modeling of the data would be premature. We observed that the gas compositions, determined on bulk and individual samples were not the same as those discharged by the geothermal wells. Gases discharged from geothermal wells are CO2-rich and contain low concentrations of light gases (i.e. H2, He, N, Ar, CH4). In contrast many of our samples displayed enrichments in these light gases. Efforts were initiated to evaluate the reasons for the observed gas distributions. As a first step, we examined the potential importance of different reservoir processes using a variety of commonly employed gas ratios (e.g. Giggenbach plots). The second technical target was the development of interpretational methodologies. We have develop methodologies for the interpretation of fluid inclusion gas data, based on the results of Phase 1, geologic interpretation of fluid inclusion data, and integration of the data. These methodologies can be used in conjunction with the relevant geological and hydrological information on the system to create fluid models for the system. The hope is that the methodologies developed will allow bulk fluid inclusion gas analysis to be a useful tool for estimating relative temperatures, identifying the sources and origins of the geothermal fluids, and developing conceptual models that can be used to help target areas of enhanced permeability.

  20. Hydrothermally Stable, Sulfur-Tolerant Platinum-Based Oxidation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrothermally Stable, Sulfur-Tolerant Platinum-Based Oxidation Catalysts via Surface Modification of SiO2 with TiO2 and ZrO2 Hydrothermally Stable, Sulfur-Tolerant Platinum-Based ...

  1. Construction of energy-stable projection-based reduced order...

    Office of Scientific and Technical Information (OSTI)

    Construction of energy-stable projection-based reduced order models Prev Next Title: Construction of energy-stable projection-based reduced order models Our paper aims to ...

  2. Stable nonlinear Mach-Zehnder fiber switch

    DOE Patents [OSTI]

    Digonnet, Michel J. F.; Shaw, H. John; Pantell, Richard H.; Sadowski, Robert W.

    1999-01-01

    An all-optical fiber switch is implemented within a short Mach-Zehnder interferometer configuration. The Mach-Zehnder switch is constructed to have a high temperature stability so as to minimize temperature gradients and other thermal effects which result in undesirable instability at the output of the switch. The Mach-Zehnder switch of the preferred embodiment is advantageously less than 2 cm in length between couplers to be sufficiently short to be thermally stable, and full switching is accomplished by heavily doping one or both of the arms between the couplers so as to provide a highly nonlinear region within one or both of the arms. A pump input source is used to affect the propagation characteristics of one of the arms to control the output coupling ratio of the switch. Because of the high nonlinearity of the pump input arm, low pump powers can be used, thereby alleviating difficulties and high cost associated with high pump input powers.

  3. Preparation of stable crude oil transport emulsions

    SciTech Connect (OSTI)

    Gregoli, A.A.; Hamshar, J.A.; Olah, A.M.; Riley, C.J.; Rimmer, D.P.

    1988-02-16

    A process for preparing an oil-in-water emulsion for pipeline transmission is described comprising: (a) shearing and mixing statically, without any dynamic shearing and mixing preceding or following the shearing and mixing statically, a hydrocarbon with an emulsifying composition comprising water and a minor amount of an emulsifying agent at a temperature of from about 100/sup 0/F. to about 200/sup 0/F. to form an oil-in-water emulsion having a viscosity sufficiently low for pipeline transmission, wherein the amount of water in the oil-in-water emulsion is from about 15% to about 60% by weight, and wherein the emulsifying agent is used in an amount sufficient to assist in the formation of the oil-in-water emulsion that is sufficiently stable for pipeline transmission; and wherein the emulsifying agent comprises about 50 percent by weight of an ethoxylated nonyl phenol compound.

  4. Stable operating regime for traveling wave devices

    DOE Patents [OSTI]

    Carlsten, Bruce E.

    2000-01-01

    Autophase stability is provided for a traveling wave device (TWD) electron beam for amplifying an RF electromagnetic wave in walls defining a waveguide for said electromagnetic wave. An off-axis electron beam is generated at a selected energy and has an energy noise inherently arising from electron gun. The off-axis electron beam is introduced into the waveguide. The off-axis electron beam is introduced into the waveguide at a second radius. The waveguide structure is designed to obtain a selected detuning of the electron beam. The off-axis electron beam has a velocity and the second radius to place the electron beam at a selected distance from the walls defining the waveguide, wherein changes in a density of the electron beam due to the RF electromagnetic wave are independent of the energy of the electron beam to provide a concomitant stable operating regime relative to the energy noise.

  5. Color stable manganese-doped phosphors

    DOE Patents [OSTI]

    Lyons, Robert Joseph; Setlur, Anant Achyut; Deshpande, Anirundha Rajendra; Grigorov, Ljudmil Slavchev

    2014-04-29

    A lighting apparatus capable of emitting white light includes a semiconductor light source; and a phosphor material radiationally coupled to the light source. The phosphor material includes a color-stable Mn.sup.+4 doped phosphor prepared by a process including providing a phosphor of formula I; A.sub.x[MF.sub.y]:Mn.sup.+4 I and contacting the phosphor in particulate form with a saturated solution of a composition of formula II in aqueous hydrofluoric acid; A.sub.x[MF.sub.y]; II wherein A is Li, Na, K, Rb, Cs, NR.sub.4 or a combination thereof; M is Si, Ge, Sn, Ti, Zr, Al, Ga, In, Sc, Y, La, Nb, Ta, Bi, Gd, or a combination thereof; R is H, lower alkyl, or a combination thereof; x is the absolute value of the charge of the [MF.sub.y] ion; and y is 5, 6 or 7. In particular embodiments, M is Si, Ge, Sn, Ti, Zr, or a combination thereof.

  6. Exotic stable cesium polynitrides at high pressure

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Peng, Feng; Han, Yunxia; Liu, Hanyu; Yao, Yansun

    2015-11-19

    New polynitrides containing metastable forms of nitrogen are actively investigated as potential high energy-density materials. Using a structure search method based on the CALYPSO methodology, we investigated the stable stoichiometries and structures of cesium polynitrides at high pressures. Along with the CsN3, we identified five new stoichiometric compounds (Cs3N, Cs2N, CsN, CsN2, and CsN5) with interesting structures that may be experimentally synthesizable at modest pressures (i.e., less than 50 GPa). Nitrogen species in the predicted structures have various structural forms ranging from single atom (N) to highly endothermic molecules (N2, N3 , N4, N5, N6) and chains (N∞). Polymeric chainsmore » of nitrogen were found in the high-pressure C2/c phase of CsN2. This structure contains a substantially high content of single N-N bonds that exceeds the previously known nitrogen chains in pure forms, and also exhibit metastability at ambient conditions. We also identified a very interesting CsN crystal that contains novel N44- anion. In conclusion, to our best knowledge, this is the first time a charged N4 species being reported. Results of the present study suggest that it is possible to obtain energetic polynitrogens in main-group nitrides under high pressure.« less

  7. Stable gravastars of anisotropic dark energy

    SciTech Connect (OSTI)

    Chan, R.; Silva, M.F.A. da; Rocha, P.; Wang, Anzhong E-mail: mfasnic@gmail.com E-mail: anzhong_wang@baylor.edu

    2009-03-15

    Dynamical models of prototype gravastars made of anisotropic dark energy fluid are constructed, in which an infinitely thin spherical shell of a perfect fluid with the equation of state p = (1-{gamma}){sigma} divides the whole spacetime into two regions, the internal region is filled with an anisotropic dark energy fluid, and the external region is the Schwarzschild. It is found that in some cases the models represent the ''bounded excursion'' stable gravastars, where the thin shell is oscillating between two finite radii, while in other cases they collapse until the formation of black holes or normal stars. In the phase space, the region for the ''bounded excursion'' gravastars is very small in comparison to that of black holes, but not empty, as found in our previous papers. Therefore, although the existence of gravastars can not be completely excluded from current analysis, the opposite is not possible either, that is, even if gravastars exist, they do not exclude the existence of black holes.

  8. The stable K0 giant star ? Gem

    SciTech Connect (OSTI)

    Gray, David F.

    2014-12-01

    A nine-season spectroscopic study of the photosphere of ? Gem (K0 III) shows this low-luminosity giant to be stable, with no effective temperature variations above ?2 K, and no secular temperature variations over the 2002-2010 time span above 0.2 K per year. The radial-velocity variations are consistent with an orbital variation of ?40 m s{sup 1}. The projected rotation rate is found to be 1.70 0.20 km s{sup 1} with a macroturbulence dispersion of 4.53 0.10 km s{sup 1}. The third-signature plot is also invariant and shows a granulation velocity gradient 20% smaller than the solar gradient. The absolute shift of the third-signature plot gives a blueshift-corrected radial velocity of 3385 70 m s{sup 1}. Bisector mapping of the Fe I ?6253 line yields a flux deficit of 12% 1% in area, somewhat smaller than for other giants, but the shape and the position of the peak at 4.8 km s{sup 1} is consistent with other giants. All of the investigated photospheric parameters are consistent with ? Gem being a low-luminosity giant in agreement with its absolute magnitude.

  9. Microsoft Word - DOE 2012-2015 Diversityand inclusion Strategic Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 1 2 - 2 0 1 5 D e p a r t me n t o f E n e r g y D i v e r s i t y & I n c l u s i o n S t r a t e g i c P l a n Department of Energy's Diversity and Inclusion Strategic Plan: 2012 -2015 i Message from the March 23, 2012 Secretary of Energy The Department of Energy (DOE) is pleased to provide its 2012-2015 Diversity and Inclusion Strategic Plan. Achieving the Department of Energy's mission and goals will involve creating a culture which values the contributions of all DOE employees and

  10. Inclusive jet cross-section measurement at CDF

    SciTech Connect (OSTI)

    Norniella, Olga; /Barcelona, IFAE

    2007-05-01

    The CDF Collaboration has measured the inclusive jet cross section using 1992-93 collider data at 1.8 TeV. The CDF measurement is in very good agreement with NLO QCD predictions for transverse energies (E{sub T}) below 200 GeV. However, it is systematically higher than NLO QCD predictions for E{sub T} above 200 GeV.

  11. Elimination of platinum inclusions in phosphate laser glasses

    SciTech Connect (OSTI)

    Campbell, J.H.; Wallerstein, E.P. ); Hayden, J.S.; Sapak, D.L.; Warrington, D.E.; Marker, A.J. III ); Toratani, H.; Meissner, H.; Nakajima, S.; Izumitani, T. )

    1989-05-26

    Results from small-scale glass melting experiments aimed at reducing the density of platinum particles in phosphate laser glasses are discussed. The platinum particles originate from the crucibles used to melt the laser glass and can cause optical damage in glasses used in high-peak-power lasers; this problem was particularly acute in the LLNL 120 kJ, 100 TW Nova laser. The melting experiments examine the effects of (i) N{sub 2}, O{sub 2}, and Cl{sub 2} gas atmospheres; (ii) temperature and temperature gradients; (iii) processing time; and (iv) platinum alloys on the formation and dissolution of platinum inclusions in LHG-8 and LG-750 phosphate laser glasses. Results show that most platinum inclusions originate early in the melt cycle, with thermal gradients within the melter being one of the major causes. By using oxidizing gas conditions (O{sub 2}, Cl{sub 2}, or O{sub 2} + Cl{sub 2}), the platinum inclusions can be dissolved into the glass during the course of the melt cycle. The dissolution rate of platinum under oxidizing conditions has been measured, and a model is used to quantify the description of the dissolution process. The effect of ionic platinum on the transmission spectra of the laser glasses produced under various oxidizing conditions has also been measured. Results from the above laboratory-scale melting experiments have been incorporated into proprietary laser-glass melting processes. The laser glasses prepared under these conditions have an average of less than 0.1 platinum inclusions/liter, which represents a 1000-fold reduction over the previously available phosphate laser glasses. 52 refs., 56 figs., 15 tabs.

  12. Black Warrior: Sub-soil gas and fluid inclusion exploration and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Black Warrior: Sub-soil gas and fluid inclusion exploration and slim well drilling Black Warrior: Sub-soil gas and fluid inclusion exploration and slim well drilling DOE Geothermal ...

  13. Momentum space dipole amplitude for DIS and inclusive hadron production

    SciTech Connect (OSTI)

    Basso, E. A.; Gay Ducati, M. B.; De Oliveira, E. G.

    2013-03-25

    We show how the AGBS model, originally developed for deep inelastic scattering applied to HERA data on the proton structure function, can also describe the RHIC data on single inclusive hadron yield for d+Au and p+p collisions through a new simultaneous fit. The single inclusive hadron production is modeled through the color glass condensate, which uses the quark(and gluon) condensate amplitudes in momentum space. The AGBS model is also a momentum space model based on the asymptotic solutions of the BK equation, although a different definition of the Fourier transform is used. This description entirely in transverse momentum of both processes arises for the first time. The small difference between the simultaneous fit and the one for HERA data alone suggests that the AGBS model describes very well both kind of processes and thus emerges as a good tool to investigate the inclusive hadron production data. We use this model for predictions at LHC energies, which agree quite well with available experimental data.

  14. Advanced Nuclear Technology: Advanced Light Water Reactors Utility Requirements Document Small Modular Reactors Inclusion Summary

    Broader source: Energy.gov [DOE]

    Advanced Nuclear Technology: Advanced Light Water Reactors Utility Requirements Document Small Modular Reactors Inclusion Summary November 2014

  15. Corrosion of Metal Inclusions In Bulk Vitrification Waste Packages

    SciTech Connect (OSTI)

    Bacon, Diana H.; Pierce, Eric M.; Wellman, Dawn M.; Strachan, Denis M.; Josephson, Gary B.

    2006-07-31

    The primary purpose of the work reported here is to analyze the potential effect of the release of technetium (Tc) from metal inclusions in bulk vitrification waste packages once they are placed in the Integrated Disposal Facility (IDF). As part of the strategy for immobilizing waste from the underground tanks at Hanford, selected wastes will be immobilized using bulk vitrification. During analyses of the glass produced in engineering-scale tests, metal inclusions were found in the glass product. This report contains the results from experiments designed to quantify the corrosion rates of metal inclusions found in the glass product from AMEC Test ES-32B and simulations designed to compare the rate of Tc release from the metal inclusions to the release of Tc from glass produced with the bulk vitrification process. In the simulations, the Tc in the metal inclusions was assumed to be released congruently during metal corrosion as soluble TcO4-. The experimental results and modeling calculations show that the metal corrosion rate will, under all conceivable conditions at the IDF, be dominated by the presence of the passivating layer and corrosion products on the metal particles. As a result, the release of Tc from the metal particles at the surfaces of fractures in the glass releases at a rate similar to the Tc present as a soluble salt. The release of the remaining Tc in the metal is controlled by the dissolution of the glass matrix. To summarize, the release of 99Tc from the BV glass within precipitated Fe is directly proportional to the diameter of the Fe particles and to the amount of precipitated Fe. However, the main contribution to the Tc release from the iron particles is over the same time period as the release of the soluble Tc salt. For the base case used in this study (0.48 mass% of 0.5 mm diameter metal particles homogeneously distributed in the BV glass), the release of 99Tc from the metal is approximately the same as the release from 0.3 mass% soluble Tc salt in the castable refractory block and it is released over the same time period as the salt. Therefore, to limit the impact of precipitated Fe on the release of 99Tc, both the amount of precipitated Fe in the BV glass and the diameter of these particles should be minimized.

  16. Synthesis Method for Stable Colloids of "Naked" Metal Nanocrystals...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analysis Advanced Materials Advanced Materials Find More Like This Return to Search Synthesis Method for Stable Colloids of "Naked" Metal Nanocrystals Oak Ridge National...

  17. Performance of a Thermally Stable Polyaromatic Hydrocarbon in...

    Office of Scientific and Technical Information (OSTI)

    Performance of a Thermally Stable Polyaromatic Hydrocarbon in a Simulated Concentrating Solar Power Loop Citation Details In-Document Search Title: Performance of a Thermally...

  18. Stable benzimidazole-incorporated porous polymer network for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stable benzimidazole-incorporated porous polymer network for carbon capture with high efficiency and low cost Previous Next List Muwei Zhang, Zachary Perry, Jinhee Park, Hong-Cai...

  19. Novel Electrolyte Enables Stable Graphite Anodes in Lithium Ion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Novel Electrolyte Enables Stable Graphite Anodes in Lithium Ion Batteries Lawrence ... Coulombic Efficiency for Lithium Ion Batteries," Journal of the Electrochemical ...

  20. Ultra-stable Gold Nanocatalysts - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Materials Advanced Materials Find More Like This Return to Search Ultra-stable Gold Nanocatalysts Oak Ridge National Laboratory Contact ORNL About This Technology...

  1. Suppression of metastable-phase inclusion in N-polar (0001{sup }) InGaN/GaN multiple quantum wells grown by metalorganic vapor phase epitaxy

    SciTech Connect (OSTI)

    Shojiki, Kanako Iwabuchi, Takuya; Kuboya, Shigeyuki; Choi, Jung-Hun; Tanikawa, Tomoyuki; Hanada, Takashi; Katayama, Ryuji; Matsuoka, Takashi; Usami, Noritaka

    2015-06-01

    The metastable zincblende (ZB) phase in N-polar (0001{sup }) (?c-plane) InGaN/GaN multiple quantum wells (MQWs) grown by metalorganic vapor phase epitaxy is elucidated by the electron backscatter diffraction measurements. From the comparison between the ?c-plane and Ga-polar (0001) (+c-plane), the ?c-plane MQWs were found to be suffered from the severe ZB-phase inclusion, while ZB-inclusion is negligible in the +c-plane MQWs grown under the same growth conditions. The ZB-phase inclusion is a hurdle for fabricating the ?c-plane light-emitting diodes because the islands with a triangular shape appeared on a surface in the ZB-phase domains. To improve the purity of stable wurtzite (WZ)-phase, the optimum conditions were investigated. The ZB-phase is dramatically eliminated with decreasing the V/III ratio and increasing the growth temperature. To obtain much-higher-quality MQWs, the thinner InGaN wells and the hydrogen introduction during GaN barriers growth were tried. Consequently, MQWs with almost pure WZ phase and with atomically smooth surface have been demonstrated.

  2. Executive Order 13583, Establishing a Coordinated Government-Wide Initiative to Promote Diversity and Inclusion in the Federal Workforce

    Broader source: Energy.gov [DOE]

    Establishes a "coordinated government-wide initiative to promote diversity and inclusion in the federal workforce".

  3. Topology-Guided Design and Syntheses of Highly Stable Mesoporous...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Topology-Guided Design and Syntheses of Highly Stable Mesoporous Porphyrinic Zirconium Metal-Organic Frameworks with High Surface Area Previous Next List Tian-Fu Liu, Dawei Feng,...

  4. Chemical and light-stable isotope characteristics of waters from...

    Open Energy Info (EERE)

    light-stable isotope characteristics of waters from the raft river geothermal area and environs, Cassia County, Idaho, Box Elder county, Utah Jump to: navigation, search OpenEI...

  5. Stable Metal-Organic Frameworks Containing Single-Molecule Traps...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stable Metal-Organic Frameworks Containing Single-Molecule Traps for Enzyme Encapsulation Previous Next List Dawei Feng, Tian-Fu Liu, Jie Su, Mathieu Bosch, Zhangwen Wei, Wei Wan,...

  6. An Exceptionally Stable, Porphyrinic Zr Metal-Organic Framework...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    An Exceptionally Stable, Porphyrinic Zr Metal-Organic Framework Exhibiting pH-Dependent Fluorescence Previous Next List Hai-Long Jiang, Dawei Feng, Kecheng Wang, Zhi-Yuan Gu,...

  7. U.S. diesel fuel prices stable from previous week

    U.S. Energy Information Administration (EIA) Indexed Site

    diesel fuel prices stable from previous week The U.S. average retail price for on-highway diesel fuel fell slightly to 2.91 a gallon on Monday. That's down half a penny from a ...

  8. Stable Wind Energy Ltd SWEL | Open Energy Information

    Open Energy Info (EERE)

    Wind Energy Ltd SWEL Jump to: navigation, search Name: Stable Wind Energy Ltd (SWEL) Place: Tirunelveli, Tamil Nadu, India Zip: 627011 Sector: Wind energy Product: Tamil Nadu-based...

  9. Fact #766: February 11, 2013 Electricity Prices are More Stable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Stable than Gasoline Prices All energy prices vary from month to month and year to year. ... (kWh) for residential electricity, the pricing for gasoline is far more volatile. ...

  10. Highly Stable Porous Polymer Networks with Exceptionally High...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highly Stable Porous Polymer Networks with Exceptionally High Gas-Uptake Capacities Previous Next List Daqiang Yuan, Weigang Lu, Dan Zhao, Hong-Cai Zhou, Adv. Mater., 23: 3723-3725...

  11. PROJECT PROFILE: Stable Perovskite Solar Cells via Chemical Vapor

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deposition | Department of Energy Stable Perovskite Solar Cells via Chemical Vapor Deposition PROJECT PROFILE: Stable Perovskite Solar Cells via Chemical Vapor Deposition Funding Opportunity: SuNLaMP SunShot Subprogram: Photovoltaics Location: National Renewable Energy Laboratory, Golden, CO SunShot Award Amount: $125,000 This project is focused on novel approaches to remove risk related to the development of hybrid perovskite solar cells (HPSCs). Researchers will synthesize a new and

  12. Semi-inclusive charged-current neutrino-nucleus reactions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Moreno, O.; Donnelly, T. W.; Van Orden, J. W.; Ford, W. P.

    2014-07-17

    The general, universal formalism for semi-inclusive charged-current (anti)neutrino-nucleus reactions is given for studies of any hadronic system, namely, either nuclei or the nucleon itself. The detailed developments are presented with the former in mind and are further specialized to cases where the final-state charged lepton and an ejected nucleon are presumed to be detected. General kinematics for such processes are summarized and then explicit expressions are developed for the leptonic and hadronic tensors involved and for the corresponding responses according to the usual charge, longitudinal and transverse projections, keeping finite the masses of all particles involved. In the case ofmore » the hadronic responses, general symmetry principles are invoked to determine which contributions can occur. As a result, the general leptonic-hadronic tensor contraction is given as well as the cross section for the process.« less

  13. Semi-inclusive charged-current neutrino-nucleus reactions

    SciTech Connect (OSTI)

    Moreno, O.; Donnelly, T. W.; Van Orden, J. W.; Ford, W. P.

    2014-07-17

    The general, universal formalism for semi-inclusive charged-current (anti)neutrino-nucleus reactions is given for studies of any hadronic system, namely, either nuclei or the nucleon itself. The detailed developments are presented with the former in mind and are further specialized to cases where the final-state charged lepton and an ejected nucleon are presumed to be detected. General kinematics for such processes are summarized and then explicit expressions are developed for the leptonic and hadronic tensors involved and for the corresponding responses according to the usual charge, longitudinal and transverse projections, keeping finite the masses of all particles involved. In the case of the hadronic responses, general symmetry principles are invoked to determine which contributions can occur. As a result, the general leptonic-hadronic tensor contraction is given as well as the cross section for the process.

  14. Numerical method for shear bands in ductile metal with inclusions

    SciTech Connect (OSTI)

    Plohr, Jee Yeon N [Los Alamos National Laboratory; Plohr, Bradley J [Los Alamos National Laboratory

    2010-01-01

    A numerical method for mesoscale simulation of high strain-rate loading of ductile metal containing inclusions is described. Because of small-scale inhomogeneities, such a composite material is prone to localized shear deformation (adiabatic shear bands). The modeling framework is the Generalized Method of Cells of Paley and Aboudi [Mech. Materials, vol. 14, pp. /27-139, 1992], which ensures that the micromechanical response of the material is reflected in the behavior of the composite at the mesoscale. To calculate the effective plastic strain rate when shear bands are present, the analytic and numerical analysis of shear bands by Glimm, Plohr, and Sharp [Mech. Materials, vol. 24, pp. 31-41, 1996] is adapted and extended.

  15. Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Personnel Management | Department of Energy Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of Personnel Management Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of Personnel Management This document, required by Executive Order 13583, provides a shared direction, encourages commitment, and creates alignment so agencies can approach their workplace diversity and inclusion efforts in a coordinated, collaborative, and integrated manner. Three key

  16. Chemical Signatures of and Precursors to Fractures Using Fluid Inclusion Stratigraphy

    Broader source: Energy.gov [DOE]

    The purpose of this research is to develop a method to identify fracture systems in wells using fluid inclusion gas analysis of drill chips.

  17. One-pot refolding of core histones from bacterial inclusion bodies...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: One-pot refolding of core histones from bacterial inclusion bodies allows rapid reconstitution of histone octamer Citation Details ...

  18. Thermally stable crystalline mesoporous metal oxides with substantially uniform pores

    DOE Patents [OSTI]

    Wiesner, Ulrich; Orilall, Mahendra Christopher; Lee, Jinwoo; DiSalvo, Jr., Francis J

    2015-01-27

    Highly crystalline metal oxide-carbon composites, as precursors to thermally stable mesoporous metal oxides, are coated with a layer of amorphous carbon. Using a `one-pot` method, highly crystalline metal oxide-carbon composites are converted to thermally stable mesoporous metal oxides, having highly crystalline mesopore walls, without causing the concomitant collapse of the mesostructure. The `one-pot` method uses block copolymers with an sp or sp 2 hybridized carbon containing hydrophobic block as structure directing agents which converts to a sturdy, amorphous carbon material under appropriate heating conditions, providing an in-situ rigid support which maintains the pores of the oxides intact while crystallizing at temperatures as high as 1000 deg C. A highly crystalline metal oxide-carbon composite can be heated to produce a thermally stable mesoporous metal oxide consisting of a single polymorph.

  19. Thermally stable surfactants and compositions and methods of use thereof

    DOE Patents [OSTI]

    Chaiko, David J. (Woodridge, IL)

    2008-09-02

    There are provided novel thermally stable surfactants for use with fillers in the preparation of polymer composites and nanocomposites. Typically, surfactants of the invention are urethanes, ureas or esters of thiocarbamic acid having a hydrocarbyl group of from 10 to 50 carbons and optionally including an ionizable or charged group (e.g., carboxyl group or quaternary amine). Thus, there are provided surfactants having Formula I: ##STR00001## wherein the variables are as defined herein. Further provided are methods of making thermally stable surfactants and compositions, including composites and nanocomposites, using fillers coated with the surfactants.

  20. Enriching stable isotopes: Alternative use for Urenco technology

    SciTech Connect (OSTI)

    Rakhorst, H.; de Jong, P.G.T.; Dawson, P.D.

    1996-12-31

    The International Urenco Group utilizes a technologically advanced centrifuge process to enrich uranium in the fissionable isotope {sup 235}U. The group operates plants in the United Kingdom, the Netherlands, and Germany and currently holds a 10% share of the multibillion dollar world enrichment market. In the early 1990s, Urenco embarked on a strategy of building on the company`s uniquely advanced centrifuge process and laser isotope separation (LIS) experience to enrich nonradioactive isotopes colloquially known as stable isotopes. This paper summarizes the present status of Urenco`s stable isotopes business.

  1. Study of thermal-gradient-induced migration of brine inclusions in salt. Final report

    SciTech Connect (OSTI)

    Olander, D.R.

    1984-08-01

    Natural salt deposits, which are being considered for high-level waste disposal, contain a small volume fraction of water in the form of brine inclusions distributed throughout the salt. Radioactive decay heating of the nuclear wastes will impose a temperature gradient on the surrounding salt which mobilizes the brine inclusions. Inclusions filled completely with brine (the all-liquid inclusions) migrate up the temperature gradient and eventually accumulate brine near the buried waste forms. The brine may slowly corrode or degrade the waste forms, which is undesirable. Therefore it is important to consider the migration of brine inclusions in salt under imposed temperature gradients to properly evaluate the performance of a future salt repository for nuclear wastes. The migration velocities of the inclusions were found to be dependent on temperature, temperature gradient, and inclusion shape and size. The velocities were also dictated by the interfacial mass transfer resistance at brine/solid interface. This interfacial resistance depends on the dislocation density in the crystal, which in turn, depends on the axial compressive loading of the crystal. At low axial loads, the dependence between the velocity and temperature gradient is nonlinear. At high axial loads, the interfacial resistance is reduced and the migration velocity depends linearly on the temperature gradient. All-liquid inclusions filled with mixed brines were also studied. For gas-liquid inclusions, helium, air and argon were compared. Migration studies were also conducted on single crystallites of natural salt as well as in polycrystalline natural salt samples. The behavior of the inclusions at large-ange grain boundaries was observed.

  2. Generation of stable subfemtosecond hard x-ray pulses with optimized...

    Office of Scientific and Technical Information (OSTI)

    Generation of stable subfemtosecond hard x-ray pulses with optimized nonlinear bunch compression Citation Details In-Document Search Title: Generation of stable subfemtosecond hard ...

  3. Generation of Stable Sub-femtosecond Hard X-ray pulses with Optimized...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Generation of Stable Sub-femtosecond Hard X-ray pulses with Optimized Nonlinear Bunch Compression Citation Details In-Document Search Title: Generation of Stable ...

  4. Stable and Efficient White OLEDs Based on a Single Emissive Material...

    Energy Savers [EERE]

    Stable and Efficient White OLEDs Based on a Single Emissive Material Stable and Efficient White OLEDs Based on a Single Emissive Material Lead Performer: Arizona State University - ...

  5. Maximum mass of stable magnetized highly super-Chandrasekhar white dwarfs: stable solutions with varying magnetic fields

    SciTech Connect (OSTI)

    Das, Upasana; Mukhopadhyay, Banibrata E-mail: bm@physics.iisc.ernet.in

    2014-06-01

    We address the issue of stability of recently proposed significantly super-Chandrasekhar white dwarfs. We present stable solutions of magnetostatic equilibrium models for super-Chandrasekhar white dwarfs pertaining to various magnetic field profiles. This has been obtained by self-consistently including the effects of the magnetic pressure gradient and total magnetic density in a general relativistic framework. We estimate that the maximum stable mass of magnetized white dwarfs could be more than 3 solar mass. This is very useful to explain peculiar, overluminous type Ia supernovae which do not conform to the traditional Chandrasekhar mass-limit.

  6. METHOD OF COATING GRAPHITE WITH STABLE METAL CARBIDES AND NITRIDES

    DOE Patents [OSTI]

    Gurinsky, D.H.

    1959-10-27

    A method is presented for forming protective stable nitride and carbide compounds on the surface of graphite. This is accomplished by contacting the graphite surface with a fused heavy liquid metal such as bismuth or leadbismuth containing zirconium, titanium, and hafnium dissolved or finely dispersed therein to form a carbide and nitride of at least one of the dissolved metals on the graphite surface.

  7. Apparatus and method for monitoring of gas having stable isotopes

    SciTech Connect (OSTI)

    Clegg, Samuel M; Fessenden-Rahn, Julianna E

    2013-03-05

    Gas having stable isotopes is monitored continuously by using a system that sends a modulated laser beam to the gas and collects and transmits the light not absorbed by the gas to a detector. Gas from geological storage, or from the atmosphere can be monitored continuously without collecting samples and transporting them to a lab.

  8. Air stable organic-inorganic nanoparticles hybrid solar cells

    SciTech Connect (OSTI)

    Qian, Lei; Yang, Jihua; Xue, Jiangeng; Holloway, Paul H.

    2015-09-29

    A solar cell includes a low work function cathode, an active layer of an organic-inorganic nanoparticle composite, a ZnO nanoparticle layer situated between and physically contacting the cathode and active layers; and a transparent high work function anode that is a bilayer electrode. The inclusion of the ZnO nanoparticle layer results in a solar cell displaying a conversion efficiency increase and reduces the device degradation rate. Embodiments of the invention are directed to novel ZnO nanoparticles that are advantageous for use as the ZnO nanoparticle layers of the novel solar cells and a method to prepare the ZnO nanoparticles.

  9. An FTIR Study of Hydrogen in Anorthosite and Associated Melt Inclusions

    SciTech Connect (OSTI)

    Seaman,S.; Dyar, M.; Marinkovic, N.; Dunbar, N.

    2006-01-01

    High-resolution Fourier transform infrared (FTIR) spectroscopy has been used to document the presence of hydrogen, to estimate its concentration, and to document its oxygen speciation in anorthoclase crystals and associated melt inclusions from Mount Erebus, Antarctica. Synchrotron-generated infrared radiation, 100 to 1000 times brighter than globar-generated infrared radiation, permits rapid collection of maps that depict relative intensities of a chosen FTIR band across the mapped area. Spectra and/or compositional maps showing variations in water concentration were collected from anorthoclase megacrysts and melt inclusions in the megacrysts. Studies of anorthoclase megacrysts involved collection of spectra from three mutually perpendicular sections cut from the crystals. FTIR spectra of anorthoclase crystals are characterized by a broad absorption band at approximately 3200 cm{sup -1} in the mid-IR range. The universal mass absorption coefficient for mid-IR range feldspar spectra, established by Johnson and Rossman (2003), was used for quantitative estimates of water concentrations in the feldspar crystals based on integrated area under the 3200 cm{sup -1} band. Water concentration in the anorthoclase sample was approximately 126 ppm, with an overall error of approximately {+-}30%. FTIR spectra of melt inclusions are characterized by a broad asymmetric absorption band at {approx}3550 cm{sup -1} that was used to calculate total water concentration. The absence of a band at 1630 cm{sup -1} suggests that water in the melt inclusions occurs as OH{sup -} rather than as molecular H{sub 2}O. Absorption coefficients established by Mandeville et al. (2002) for H species in glass were used to calculate water concentrations in the melt inclusions. Melt inclusions in the Mt. Erebus anorthoclase have water concentrations ranging from 0.12 to 0.39 wt%, with an overall error of approximately {+-}15%. The ratio of water in anorthoclase crystals to water in the melt from which the crystals formed, based on this study, and at these low melt water concentrations, is approximately 1:10. However, water concentration varies significantly from one melt inclusion to another, possibly suggesting initial melt water heterogeneity. Maps of water concentration show that variations in water concentration within melt inclusions are associated with fractures that cut the melt inclusions and in some cases do not extend out into surrounding crystals or into crystal inclusions. Thin ({approx}50 {micro}m thick) zones of elevated water concentrations on the boundaries of the crystals in contact with melt inclusions suggest that water has diffused into the crystals from the melt inclusions.

  10. DOE Ups the Ante for Diversity and Inclusion at the Department of Energy |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy DOE Ups the Ante for Diversity and Inclusion at the Department of Energy DOE Ups the Ante for Diversity and Inclusion at the Department of Energy April 17, 2012 - 8:25am Addthis DOE Ups the Ante for Diversity and Inclusion at the Department of Energy Bill Valdez Bill Valdez Director of Workforce Management "We will treat our people as our greatest asset." This phrase is not only one of DOE's management principles, but it is also the rock behind our new

  11. Inclusive hadron distributions in p+p collisions from saturation models of HERA DIS data.

    SciTech Connect (OSTI)

    Tribedy, P.; Venugopalan, R.

    2010-12-06

    Dipole models based on various saturation scenarios provide reasonable fits to small-x DIS inclusive, diffractive and exclusive data from HERA. Proton un-integrated gluon distributions extracted from such fits are employed in a k{sub {perpendicular}}-factorization framework to calculate inclusive gluon distributions at various energies. The n-particle multiplicity distribution predicted in the Glasma flux tube approach shows good agreement with data over a wide range of energies. Hadron inclusive transverse momentum distributions expressed in terms of the saturation scale demonstrate universal behavior over a wider kinematic range systematically with increasing center of mass energies.

  12. Inclusive charm production in {upsilon}(nS) decay (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Inclusive charm production in {upsilon}(nS) decay Citation Details In-Document Search Title: Inclusive charm production in {upsilon}(nS) decay Based on the nonrelativistic QCD (NRQCD) factorization formalism, we calculate the inclusive charm production rate in {upsilon}(nS) decay at leading order in the strong coupling constant {alpha}{sub s} and the relative velocity v of the b quark in the quarkonium rest frame. The branching fractions for {upsilon}(nS) to charm for n=1, 2,

  13. Single transverse-spin asymmetry for D-meson production in semi-inclusive

    Office of Scientific and Technical Information (OSTI)

    deep inelastic scattering (Journal Article) | SciTech Connect SciTech Connect Search Results Journal Article: Single transverse-spin asymmetry for D-meson production in semi-inclusive deep inelastic scattering Citation Details In-Document Search Title: Single transverse-spin asymmetry for D-meson production in semi-inclusive deep inelastic scattering We study the single transverse-spin asymmetry for open charm production in the semi-inclusive lepton-hadron deep inelastic scattering. We

  14. Construction of energy-stable Galerkin reduced order models.

    SciTech Connect (OSTI)

    Kalashnikova, Irina; Barone, Matthew Franklin; Arunajatesan, Srinivasan; van Bloemen Waanders, Bart Gustaaf

    2013-05-01

    This report aims to unify several approaches for building stable projection-based reduced order models (ROMs). Attention is focused on linear time-invariant (LTI) systems. The model reduction procedure consists of two steps: the computation of a reduced basis, and the projection of the governing partial differential equations (PDEs) onto this reduced basis. Two kinds of reduced bases are considered: the proper orthogonal decomposition (POD) basis and the balanced truncation basis. The projection step of the model reduction can be done in two ways: via continuous projection or via discrete projection. First, an approach for building energy-stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of PDEs using continuous projection is proposed. The idea is to apply to the set of PDEs a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The resulting ROM will be energy-stable for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special weighted L2 inner product, termed the %E2%80%9Csymmetry inner product%E2%80%9D. Attention is then turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, a weighted L2 inner product termed the %E2%80%9CLyapunov inner product%E2%80%9D, is derived. The weighting matrix that defines the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system arising from the discretization of a system of PDEs in space. It is shown that a ROM constructed via discrete projection using the Lyapunov inner product will be energy-stable for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. Comparisons are also made between the symmetry inner product and the Lyapunov inner product. The performance of ROMs constructed using these inner products is evaluated on several benchmark test cases.

  15. Fixed points, stable manifolds, weather regimes, and their predictability

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Deremble, Bruno; D'Andrea, Fabio; Ghil, Michael

    2009-10-27

    In a simple, one-layer atmospheric model, we study the links between low-frequency variability and the model’s fixed points in phase space. The model dynamics is characterized by the coexistence of multiple ''weather regimes.'' To investigate the transitions from one regime to another, we focus on the identification of stable manifolds associated with fixed points. We show that these manifolds act as separatrices between regimes. We track each manifold by making use of two local predictability measures arising from the meteorological applications of nonlinear dynamics, namely, ''bred vectors'' and singular vectors. These results are then verified in the framework of ensemblemore » forecasts issued from clouds (ensembles) of initial states. The divergence of the trajectories allows us to establish the connections between zones of low predictability, the geometry of the stable manifolds, and transitions between regimes.« less

  16. Searching Stable CuxS Structures for Photovoltaic Application (Presentation)

    SciTech Connect (OSTI)

    Zhao, Y.; Xu, O.; Huang, B.; Yan, Y.; Noufi, R,; Wei, S-H

    2014-03-01

    The crystal and electronic band structures of CuxS (1.25 < x ? 2) are systematically studied using the density-functional theory method. For Cu2S, all the three chalcocite phases, i.e., the low-chalcocite, the high-chalcocite, and the cubic-chalcocite phases have direct band gaps around 1.3-1.5 eV, with the low-chalcocite being the most stable one. However, Cu vacancies can form spontaneously in these compounds, causing instability of Cu2S. We find that under Cu-rich condition, the anilite Cu1.75S is the most stable structure. It has a predicted band gap of 1.4 eV and is a promising solar cell absorber.

  17. Stable thin film resistors using double layer structure

    SciTech Connect (OSTI)

    Jia, Q.X.; Lee, H.J.; Ma, E.; Anderson, W.A.; Collins, F.M.

    1995-06-01

    Highly stable bilayer thin film resistors, which consist of an underlying layer of tantalum nitride and of a capping layer of ruthenium oxide, were developed by taking advantage of the desired characteristics of two different materials in a single system. The resistors fabricated in such a way were highly stable under power loading or thermal cycling. Resistors with one digit temperature coefficient of resistance could be easily controlled by the layer thickness ratio of the tantalum nitride to the ruthenium oxide and the {ital ex} {ital situ} annealing temperature or duration. Auger electron spectroscopy depth profile on the thin films indicates that the ruthenium oxide layer is well defined for the as-deposited form. Nevertheless, interdiffusion takes place after thermal treatment of the bilayer which is used to tune the temperature coefficient of resistance and to stabilize the resistance of the resistors.

  18. Stable doping of carbon nanotubes via molecular self assembly

    SciTech Connect (OSTI)

    Lee, B.; Chen, Y.; Podzorov, V.; Cook, A.; Zakhidov, A.

    2014-10-14

    We report a novel method for stable doping of carbon nanotubes (CNT) based on methods of molecular self assembly. A conformal growth of a self-assembled monolayer of fluoroalkyl trichloro-silane (FTS) at CNT surfaces results in a strong increase of the sheet conductivity of CNT electrodes by 60–300%, depending on the CNT chirality and composition. The charge carrier mobility of undoped partially aligned CNT films was independently estimated in a field-effect transistor geometry (~100 cm²V⁻¹s⁻¹). The hole density induced by the FTS monolayer in CNT sheets is estimated to be ~1.8 ×10¹⁴cm⁻². We also show that FTS doping of CNT anodes greatly improves the performance of organic solar cells. This large and stable doping effect, easily achieved in large-area samples, makes this approach very attractive for applications of CNTs in transparent and flexible electronics.

  19. Low work function, stable compound clusters and generation process

    DOE Patents [OSTI]

    Dinh, Long N.; Balooch, Mehdi; Schildbach, Marcus A.; Hamza, Alex V.; McLean, II, William

    2000-01-01

    Low work function, stable compound clusters are generated by co-evaporation of a solid semiconductor (i.e., Si) and alkali metal (i.e., Cs) elements in an oxygen environment. The compound clusters are easily patterned during deposition on substrate surfaces using a conventional photo-resist technique. The cluster size distribution is narrow, with a peak range of angstroms to nanometers depending on the oxygen pressure and the Si source temperature. Tests have shown that compound clusters when deposited on a carbon substrate contain the desired low work function property and are stable up to 600.degree. C. Using the patterned cluster containing plate as a cathode baseplate and a faceplate covered with phosphor as an anode, one can apply a positive bias to the faceplate to easily extract electrons and obtain illumination.

  20. Stable Isotope Characterization of TICs/TIMs: Analytical Progress Report

    SciTech Connect (OSTI)

    Volpe, A M; Singleton, M J

    2009-06-05

    We measured twelve alkali cyanide samples that were also sent to ORNL and PNNL collaborators. While results indicate distinct {delta}{sup 13}C and {delta}{sup 15}N values that would be useful to signature studies, the alkali cyanides, especially NaCN, show chemical breakdown during storage that will influence forensic analysis. Carbon and nitrogen stable isotopic compositions of raw materials used to synthesis TETS were measured. Results indicate wide ranges in {delta}{sup 13}C and {delta}{sup 15}N values. Using these raw materials, LLNL scientists synthesized three batches of TETS following published procedures. Stable isotopic measurements of TETS synthesis products indicates nitrogen ({var_epsilon} {sup 15}N = -1.7 to -0.8) and carbon ({var_epsilon} {sup 13}C = -1.0 to -0.1) fractionation during production.

  1. High Performance OLEDs with Air-stable Nanostructured Electrodes - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal Building Energy Efficiency Building Energy Efficiency Find More Like This Return to Search High Performance OLEDs with Air-stable Nanostructured Electrodes Lawrence Berkeley National Laboratory Contact LBL About This Technology Technology Marketing SummaryScientists at Berkeley Lab have modified the cathode-organic layer of an OLED device to significantly enhance electron injection efficiency and reduce the sensitivity of the cathode to environmental degradation by water

  2. Application Of Fluid Inclusion And Rock-Gas Analysis In Mineral...

    Open Energy Info (EERE)

    to analyze these gases in fluid inclusions in jasperoid around the Pueblo Viejo gold-silver deposit, in vein minerals from the Creede silver-lead-zinc deposit, and from...

  3. Distorted spin dependent spectral function of {sup 3}He and semi-inclusive

    Office of Scientific and Technical Information (OSTI)

    deep inelastic scattering processes (Journal Article) | SciTech Connect Distorted spin dependent spectral function of {sup 3}He and semi-inclusive deep inelastic scattering processes Citation Details In-Document Search Title: Distorted spin dependent spectral function of {sup 3}He and semi-inclusive deep inelastic scattering processes The spin dependent spectral function, relevant to describe polarized electron scattering off polarized {sup 3}He, is studied, within the Plane Wave Impulse

  4. One-pot refolding of core histones from bacterial inclusion bodies allows

    Office of Scientific and Technical Information (OSTI)

    rapid reconstitution of histone octamer (Journal Article) | SciTech Connect SciTech Connect Search Results Journal Article: One-pot refolding of core histones from bacterial inclusion bodies allows rapid reconstitution of histone octamer Citation Details In-Document Search Title: One-pot refolding of core histones from bacterial inclusion bodies allows rapid reconstitution of histone octamer Authors: Lee, Young-Tae ; Gibbons, Garrett ; Lee, Shirley Y. ; Nikolovska-Coleska, Zaneta ; Dou, Yali

  5. U.S. Office of Personnel Management, Office of Diversity and Inclusion

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government-Wide Diversity and Inclusion Strategic Plan 2011 Our Nation derives strength from the diversity of its population and from its commitment to equal opportunity for all. We are at our best when we draw on the talents of all parts of our society, and our greatest accomplishments are achieved when diverse perspectives are brought to bear to overcome our greatest challenges. - President Obama, Executive Order 13583 U.S. Office of Personnel Management Office of Diversity and Inclusion 2

  6. Stable atomic structure of NiTi austenite

    SciTech Connect (OSTI)

    Zarkevich, Nikolai A; Johnson, Duane D

    2014-08-01

    Nitinol (NiTi), the most widely used shape-memory alloy, exhibits an austenite phase that has yet to be identified. The usually assumed austenitic structure is cubic B2, which has imaginary phonon modes, hence it is unstable. We suggest a stable austenitic structure that on average has B2 symmetry (observed by x-ray and neutron diffraction), but it exhibits finite atomic displacements from the ideal B2 sites. The proposed structure has a phonon spectrum that agrees with that from neutron scattering, has diffraction spectra in agreement with x-ray diffraction, and has an energy relative to the ground state that agrees with calorimetry data.

  7. Ferroelectric nanostructure having switchable multi-stable vortex states

    DOE Patents [OSTI]

    Naumov, Ivan I.; Bellaiche, Laurent M.; Prosandeev, Sergey A.; Ponomareva, Inna V.; Kornev, Igor A.

    2009-09-22

    A ferroelectric nanostructure formed as a low dimensional nano-scale ferroelectric material having at least one vortex ring of polarization generating an ordered toroid moment switchable between multi-stable states. A stress-free ferroelectric nanodot under open-circuit-like electrical boundary conditions maintains such a vortex structure for their local dipoles when subject to a transverse inhomogeneous static electric field controlling the direction of the macroscopic toroidal moment. Stress is also capable of controlling the vortex's chirality, because of the electromechanical coupling that exists in ferroelectric nanodots.

  8. Topology-Guided Design and Syntheses of Highly Stable Mesoporous

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Porphyrinic Zirconium Metal-Organic Frameworks with High Surface Area | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Topology-Guided Design and Syntheses of Highly Stable Mesoporous Porphyrinic Zirconium Metal-Organic Frameworks with High Surface Area Previous Next List Tian-Fu Liu, Dawei Feng, Ying-Pin Chen, Lanfang Zou, Mathieu Bosch, Shuai Yuan, Zhangwen Wei, Stephen Fordham, Kecheng Wang, and Hong-Cai Zhou, J. Am. Chem. Soc. 137, 413-419 (2015) DOI:

  9. New Insight into the Pygmy Dipole Resonance in Stable Nuclei

    SciTech Connect (OSTI)

    Neumann-Cosel, P. von

    2008-11-11

    Two examples of recent work on the structure of low-energy electric dipole modes are presented. The first part discusses the systematics of the pygmy dipole resonance (PDR) in stable tin isotopes deduced from high-resolution ({gamma},{gamma}') experiments. These help to distinguish between microscopic QRPA calculations based on either a relativistic or a nonrelativistic mean-field description, predicting significantly different properties of the PDR. The second part presents attempts to unravel the structure of dipoles modes at energies below the giant dipole resonance (GDR) in {sup 208}Pb with a high-resolution measurement of the (p-vector,p-vector') reaction under 0 deg.

  10. Thermally stable booster explosive and process for manufacture

    DOE Patents [OSTI]

    Quinlin, William T.; Thorpe, Raymond; Lightfoot, James M.

    2006-03-21

    A thermally stable booster explosive and process for the manufacture of the explosive. The product explosive is 2,4,7,9-tetranitro-10H-benzo[4,5]furo[3,2-b]indole (TNBFI). A reactant/solvent such as n-methylpyrrolidone (NMP) or dimethyl formamide (DMF) is made slightly basic. The solution is heated to reduce the water content. The solution is cooled and hexanitrostilbene is added. The solution is heated to a predetermined temperature for a specific time period, cooled, and the product is collected by filtration.

  11. Growing ordered and stable nanostructures on polyhedral nanocrystals

    SciTech Connect (OSTI)

    Lu, L. X.; Bharathi, M. S.; Zhang, Y. W.; Upmanyu, M.

    2014-12-22

    Using both theoretical analysis and phase field simulation, we reveal robust and facile self-assembly routes, which allow the growth of different stable and ordered nanostructures on various polyhedral nanocrystals (NCs) heteroepitaxially. Our studies show that by increasing the NC's size, transitions from formal growth to ordered quantum dots on the facets and further to ordered quantum dots on the corners take place. The predicted morphologies and their transitions are in excellent agreement with existing widely scattered experimental results. Our study presents a facile and potentially practical route for mass-producing hybrid NCs with well-defined size, shape, composition, and architecture.

  12. Use of Stable Isotopes in Forensic Analysis of Microorganisms

    SciTech Connect (OSTI)

    Kreuzer-Martin, Helen W.; Hegg, Eric L.

    2012-01-18

    The use of isotopic signatures for forensic analysis of biological materials is well-established, and the same general principles that apply to interpretation of stable isotope content of C, N, O, and H apply to the analysis of microorganisms. Heterotrophic microorganisms derive their isotopic content from their growth substrates, which are largely plant and animal products, and the water in their culture medium. Thus the isotope signatures of microbes are tied to their growth environment. The C, N, O, and H isotope ratios of spores have been demonstrated to constitute highly discriminating signatures for sample matching. They can rule out specific samples of media and/or water as possible production media, and can predict isotope ratio ranges of the culture media and water used to produce a given sample. These applications have been developed and tested through analyses of approximately 250 samples of Bacillus subtilis spores and over 500 samples of culture media, providing a strong statistical basis for data interpretation. A Bayesian statistical framework for integrating stable isotope data with other types of signatures derived from microorganisms has been able to characterize the culture medium used to produce spores of various Bacillus species, leveraging isotopic differences in different medium types and demonstrating the power of data integration for forensic investigations.

  13. Stable, concentrated solutions of polyaniline using amines as gel inhibitors

    DOE Patents [OSTI]

    Wang, Hsing-Lin; Mattes, Benjamin R.

    2002-01-01

    Stable, concentrated solutions of high-molecular weight polyaniline using amines as gel inhibitors. Certain amine compounds (gel inhibitors) are used to form highly concentrated, stable solutions of the emeraldine base form of polyaniline in numerous organic solvents from which coatings, films and fibers are readily prepared without problems associated with rapid gelation which occurs when concentrated solutions are attempted without the use of the gel inhibitors of the present invention. Tertiary amines are used to solubilize low-molecular weight fractions (M.sub.w <120,000, M.sub.n <30,000) of the pernigraniline, emeraldine, and leucoemeraldine oxidation states of polyaniline as concentrated (>20 wt. %) polyaniline solutions, while primary and secondary amines are used to produce solutions having 15-40 wt % of high-molecular weight polyaniline [M.sub.w.gtoreq.120,000, M.sub.n.gtoreq.30,000]. Concentrated solutions of polyaniline co-polymers or ring and/or nitrogen-substituted polyanilines may also be prepared.

  14. Stable zymomonas mobilis xylose and arabinose fermenting strains

    DOE Patents [OSTI]

    Zhang, Min; Chou, Yat-Chen

    2008-04-08

    The present invention briefly includes a transposon for stable insertion of foreign genes into a bacterial genome, comprising at least one operon having structural genes encoding enzymes selected from the group consisting of xylAxylB, araBAD and tal/tkt, and at least one promoter for expression of the structural genes in the bacterium, a pair of inverted insertion sequences, the operons contained inside the insertion sequences, and a transposase gene located outside of the insertion sequences. A plasmid shuttle vector for transformation of foreign genes into a bacterial genome, comprising at least one operon having structural genes encoding enzymes selected from the group consisting of xylAxylB, araBAD and tal/tkt, at least one promoter for expression of the structural genes in the bacterium, and at least two DNA fragments having homology with a gene in the bacterial genome to be transformed, is also provided.The transposon and shuttle vectors are useful in constructing significantly different Zymomonas mobilis strains, according to the present invention, which are useful in the conversion of the cellulose derived pentose sugars into fuels and chemicals, using traditional fermentation technology, because they are stable for expression in a non-selection medium.

  15. Dark halos and elliptical galaxies as marginally stable dynamical systems

    SciTech Connect (OSTI)

    El Zant, A. A.

    2013-12-10

    The origin of equilibrium gravitational configurations is sought in terms of the stability of their trajectories, as described by the curvature of their Lagrangian configuration manifold of particle positionsa context in which subtle spurious effects originating from the singularity in the two-body potential become particularly clear. We focus on the case of spherical systems, which support only regular orbits in the collisionless limit, despite the persistence of local exponential instability of N-body trajectories in the anomalous case of discrete point particle representation even as N ? ?. When the singularity in the potential is removed, this apparent contradiction disappears. In the absence of fluctuations, equilibrium configurations generally correspond to positive scalar curvature and thus support stable trajectories. A null scalar curvature is associated with an effective, averaged equation of state describing dynamically relaxed equilibria with marginally stable trajectories. The associated configurations are quite similar to those of observed elliptical galaxies and simulated cosmological halos and are necessarily different from the systems dominated by isothermal cores, expected from entropy maximization in the context of the standard theory of violent relaxation. It is suggested that this is the case because a system starting far from equilibrium does not reach a 'most probable state' via violent relaxation, but that this process comes to an end as the system finds and (settles in) a configuration where it can most efficiently wash out perturbations. We explicitly test this interpretation by means of direct simulations.

  16. A model experiment to assess the effects of inclusions on wave propagation in soil media

    SciTech Connect (OSTI)

    Houston, Thomas W; Ray, Richard P

    2009-01-01

    A data acquisition system has been assembled using Micro-Electro-Mechanical Systems (MEMS) technology which provides a flexible data gathering capability to support recording accelerations at various locations within a sand filled 5 meter square test pit that has a depth extending into underlying gravelly soils. Dual-axis accelerometers weighing less than 1 gram each, made possible by advances in MEMS technology, are connected to up to 5 data acquisition (PXI modules) boards, each capable of controlling and recording data from 16 separate dual axis accelerometers. This data acquisition system is used to measure and record acceleration data from wave propagations that are generated by the impact of a hammer on a striker plate and are modified by an inclusion or occlusion buried in the soil media. Thirty-four two-axis accelerometers were placed at surface and embedded locations on either side of various inclusions buried in the test pit. This large number of accelerometers permits experimentally obtaining high quality spatial and temporal data that can describe the character of the generated wave-forms and the modification of those wave-forms caused by the inclusion. A number of differing materials and geometric forms are used to create inclusions in order to provide sufficient data to permit ascertaining the ability of the measurements to describe the character of the inclusion. Continuous Wavelet Transforms are used to remove background noise and to aid interpretation of the character of the generated wave-form.

  17. New stable Re-B phases for ultra-hard materials (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    New stable Re-B phases for ultra-hard materials Citation Details In-Document Search Title: New stable Re-B phases for ultra-hard materials As a distinct class of ultra-hard...

  18. Discovery of a meta-stable Al-Sm phase with unknown stoichiometry...

    Office of Scientific and Technical Information (OSTI)

    Discovery of a meta-stable Al-Sm phase with unknown stoichiometry using a genetic algorithm Citation Details In-Document Search Title: Discovery of a meta-stable Al-Sm phase with...

  19. Noncentrosymmetric salt inclusion oxides: Role of salt lattices and counter ions in bulk polarity

    SciTech Connect (OSTI)

    West, J. Palmer; Hwu, Shiou-Jyh

    2012-11-15

    The synthesis and structural features of a newly emerged class of salt-inclusion solids (SISs) are reviewed. The descriptive chemistry with respect to the role of ionic salt and its correlation with bulk noncentrosymmetricity and polarity of the covalent oxide lattice in question is discussed by means of structure analysis. These unprecedented discoveries have opened doors to novel materials synthesis via the utilities of salt-inclusion chemistry (SIC) that are otherwise known as the molten-salt approach. The result of these investigations prove that the bulk acentricity, or cancellation of which, can be accounted for from the perspective of ionic and/or salt lattices. Highlights: Black-Right-Pointing-Pointer Synthesis and structure of newly emerged salt-inclusion solids are reviewed. Black-Right-Pointing-Pointer Salt lattice and its symmetry correlation with polar framework are discussed. Black-Right-Pointing-Pointer Preservation of acentricity is accounted for from the perspective of ionic and salt lattices.

  20. Ignitor with stable low-energy thermite igniting system

    DOE Patents [OSTI]

    Kelly, Michael D. (West Alexandria, OH); Munger, Alan C. (Miamisburg, OH)

    1991-02-05

    A stable compact low-energy igniting system in an ignitor utilizes two components, an initiating charge and an output charge. The initiating charge is a thermite in ultra-fine powder form compacted to 50-70% of theoretical maximum density and disposed in a cavity of a header of the ignitor adjacent to an electrical ignition device, or bridgewire, mounted in the header cavity. The initiating charge is ignitable by operation of the ignition device in a hot-wire mode. The output charge is a thermite in high-density consoladated form compacted to 90-99% of theoretical maximum density and disposed adjacent to the initiating charge on an opposite end thereof from the electrical ignition device and ignitable by the initiating charge. A sleeve is provided for mounting the output charge to the ignitor header with the initiating charge confined therebetween in the cavity.

  1. Encapsulated graphene field-effect transistors for air stable operation

    SciTech Connect (OSTI)

    Alexandrou, Konstantinos Kymissis, Ioannis; Petrone, Nicholas; Hone, James

    2015-03-16

    In this work, we report the fabrication of encapsulated graphene field effects transistors (GFETs) with excellent air stability operation in ambient environment. Graphene's 2D nature makes its electronics properties very sensitive to the surrounding environment, and thus, non-encapsulated graphene devices show extensive vulnerability due to unintentional hole doping from the presence of water molecules and oxygen limiting their performance and use in real world applications. Encapsulating GFETs with a thin layer of parylene-C and aluminum deposited on top of the exposed graphene channel area resulted in devices with excellent electrical performance stability for an extended period of time. Moisture penetration is reduced significantly and carrier mobility degraded substantially less when compared to non-encapsulated control devices. Our CMOS compatible encapsulation method minimizes the problems of environmental doping and lifetime performance degradation, enabling the operation of air stable devices for next generation graphene-based electronics.

  2. Stable laserplasma accelerators at low densities

    SciTech Connect (OSTI)

    Li, Song; Hafz, Nasr A. M. Mirzaie, Mohammad; Ge, Xulei; Sokollik, Thomas; Chen, Min; Sheng, Zhengming; Zhang, Jie

    2014-07-28

    We report stable laser wakefield acceleration using 1750 TW laser pulses interacting with 4?mm-long helium gas jet. The initial laser spot size was relatively large (28??m) and the plasma densities were 0.482.0??10{sup 19?}cm{sup ?3}. High-quality 100MeV electron beams were generated at the plasma density of 7.5??10{sup 18?}cm{sup ?3}, at which the beam parameters (pointing angle, energy spectrum, charge, and divergence angle) were measured and stabilized. At higher densities, filamentation instability of the laser-plasma interaction was observed and it has led to multiple wakefield accelerated electron beams. The experimental results are supported by 2D particle-in-cell simulations. The achievement presented here is an important step toward the use of laser-driven accelerators in real applications.

  3. Inclusive Rates and Spectra of the Lambda, Cascade, and Omega Hyperons

    Office of Scientific and Technical Information (OSTI)

    atBaBar (Thesis/Dissertation) | SciTech Connect Thesis/Dissertation: Inclusive Rates and Spectra of the Lambda, Cascade, and Omega Hyperons atBaBar Citation Details In-Document Search Title: Inclusive Rates and Spectra of the Lambda, Cascade, and Omega Hyperons atBaBar We employ Runs 1-4 off-peak data sample (about 21.5 fb{sup -1}) to produce the current world-best spectra and production rates measurements for three strangely-flavored baryons: the {Lambda} hyperon, the cascade hyperon, and

  4. Hadron mass corrections in semi-inclusive deep-inelastic scattering

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Guerrero Teran, Juan Vicente; Ethier, James J.; Accardi, Alberto; Casper, Steven W.; Melnitchouk, Wally

    2015-09-24

    We found that the spin-dependent cross sections for semi-inclusive lepton-nucleon scattering are derived in the framework of collinear factorization, including the effects of masses of the target and produced hadron at finite Q2. At leading order the cross sections factorize into products of parton distribution and fragmentation functions evaluated in terms of new, mass-dependent scaling variables. Furthermore, the size of the hadron mass corrections is estimated at kinematics relevant for current and future experiments, and the implications for the extraction of parton distributions from semi-inclusive measurements are discussed.

  5. Inclusive electron scattering at high Q/sup 2/ in the region 1 < x < 3

    SciTech Connect (OSTI)

    Day, D.

    1987-01-01

    New inclusive electron scattering data at high Q/sup 2/ from nuclei taken in the x range unavailable to the free nucleon are presented. The ratios of cross section per nucleon, (4/56)d sigma/sup Fe//d sigma/sup He/, show a plateau for 1.3 < x < 2.0 which has been suggested as a signature of quark clusters in nuclei. The subtraction of the quasielastic cross section from the inclusive spectra reveals that the data scale in x at low momentum transfer. A proposal for a new experiment is discussed. 16 refs., 6 figs.

  6. Further stable neutron star models from f(R) gravity

    SciTech Connect (OSTI)

    Astashenok, Artyom V.; Capozziello, Salvatore; Odintsov, Sergei D. E-mail: capozziello@na.infn.it

    2013-12-01

    Neutron star models in perturbative f(R) gravity are considered with realistic equations of state. In particular, we consider the FPS, SLy and other equations of state and a case of piecewise equation of state for stars with quark cores. The mass-radius relations for f(R) = R+R(e{sup ?R/R{sub 0}}?1) model and for R{sup 2} models with logarithmic and cubic corrections are obtained. In the case of R{sup 2} gravity with cubic corrections, we obtain that at high central densities (? > 10?{sub ns}, where ?{sub ns} = 2.7 10{sup 14} g/cm{sup 3} is the nuclear saturation density), stable star configurations exist. The minimal radius of such stars is close to 9 km with maximal mass ? 1.9M{sub ?} (SLy equation). A similar situation takes place for AP4 and BSK20 EoS. Such an effect can give rise to more compact stars than in General Relativity. If observationally identified, such objects could constitute a formidable signature for modified gravity at astrophysical level. Another interesting result can be achieved in modified gravity with only a cubic correction. For some EoS, the upper limit of neutron star mass increases and therefore these EoS can describe realistic star configurations (although, in General Relativity, these EoS are excluded by observational constraints)

  7. Unexpected Stable Two-dimensional Silicon Phosphides with Different Stoichiometries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yoon, Mina; Wei, Su-Huai; Sumpter, Bobby G

    2015-01-01

    The discovery of stable two-dimensional, earth-abundant, semiconducting materials is of great interest and may impact future electronic technologies. By combining global structural prediction and first-principles calculations, we have theoretically discovered several previously unknown semiconducting silicon phosphides (SixPy) monolayers, which could be formed stably at the stoichiometries of y/x1. Unexpectedly, some of these compounds, i.e., P-6m2 Si1P1 and Pm Si1P2, have comparable or even lower formation enthalpies than their previously known bulk allotropes. The band gaps (Eg) of SixPy compounds can be dramatically tuned in an extremely wide range (0< Eg < 3 eV) by simply changing the number of layersmore » or applying an in-plane strain. Moreover, we find that carrier doping can drive the ground state of C2/m Si1P3 from a nonmagnetic state into a robust half-metallic spin-polarized state, originating from its unique valence band structure, which can extend the use of Si-related compounds for spintronics.« less

  8. Stable isotope, site-specific mass tagging for protein identification

    DOE Patents [OSTI]

    Chen, Xian

    2006-10-24

    Proteolytic peptide mass mapping as measured by mass spectrometry provides an important method for the identification of proteins, which are usually identified by matching the measured and calculated m/z values of the proteolytic peptides. A unique identification is, however, heavily dependent upon the mass accuracy and sequence coverage of the fragment ions generated by peptide ionization. The present invention describes a method for increasing the specificity, accuracy and efficiency of the assignments of particular proteolytic peptides and consequent protein identification, by the incorporation of selected amino acid residue(s) enriched with stable isotope(s) into the protein sequence without the need for ultrahigh instrumental accuracy. Selected amino acid(s) are labeled with .sup.13C/.sup.15N/.sup.2H and incorporated into proteins in a sequence-specific manner during cell culturing. Each of these labeled amino acids carries a defined mass change encoded in its monoisotopic distribution pattern. Through their characteristic patterns, the peptides with mass tag(s) can then be readily distinguished from other peptides in mass spectra. The present method of identifying unique proteins can also be extended to protein complexes and will significantly increase data search specificity, efficiency and accuracy for protein identifications.

  9. Research on stable, high-efficiency amorphous silicon multijunction modules

    SciTech Connect (OSTI)

    Ghosh, M.; DelCueto, J.: Kampas, F.; Xi, J. )

    1993-02-01

    This report describes results from the first phase of a three-phase contract for the development of stable, high-efficiency, same-band-gap, amorphous silicon (a-Si) multijunction photovoltaic (PV) modules. The program involved improving the properties of individual layers of semiconductor and non-semiconductor materials and small-area single-junction and multijunction devices, as well as the multijunction modules. The semiconductor materials research was performed on a-Si p, i, and n layers, and on microcrystalline silicon n layers. These were deposited using plasma-enhanced chemical vapor deposition. The non-semiconductor materials studied were tin oxide, for use as a transparent-conducting-oxide (TCO), and zinc oxide, for use as a back reflector and as a buffer layer between the TCO and the semiconductor layers. Tin oxide was deposited using atmospheric-pressure chemical vapor deposition. Zinc oxide was deposited using magnetron sputtering. The research indicated that the major challenge in the fabrication of a-Si multijunction PV modules is the contact between the two p-i-n cells. A structure that has low optical absorption but that also facilitates the recombination of electrons from the first p-i-n structure with holes from the second p-i-n structure is required. Non-semiconductor layers and a-Si semiconductor layers were tested without achieving the desired result.

  10. Unexpected Stable Two-dimensional Silicon Phosphides with Different Stoichiometries

    SciTech Connect (OSTI)

    Huang, Bing; Zhuang, Houlong; Yoon, Mina; Wei, Su-Huai; Sumpter, Bobby G

    2015-01-01

    The discovery of stable two-dimensional, earth-abundant, semiconducting materials is of great interest and may impact future electronic technologies. By combining global structural prediction and first-principles calculations, we have theoretically discovered several previously unknown semiconducting silicon phosphides (SixPy) monolayers, which could be formed stably at the stoichiometries of y/x1. Unexpectedly, some of these compounds, i.e., P-6m2 Si1P1 and Pm Si1P2, have comparable or even lower formation enthalpies than their previously known bulk allotropes. The band gaps (Eg) of SixPy compounds can be dramatically tuned in an extremely wide range (0< Eg < 3 eV) by simply changing the number of layers or applying an in-plane strain. Moreover, we find that carrier doping can drive the ground state of C2/m Si1P3 from a nonmagnetic state into a robust half-metallic spin-polarized state, originating from its unique valence band structure, which can extend the use of Si-related compounds for spintronics.

  11. Highly stable tetrathiafulvalene radical dimers in [3]catenanes

    SciTech Connect (OSTI)

    Spruell, Jason M.; Coskun, Ali; Friedman, Douglas C.; Forgan, Ross S.; Sarjeant, Amy A.; Trabolsi, Ali; Fahrenbach, Albert C.; Barin, Gokhan; Paxton, Walter F.; Dey, Sanjeev K.; Olson, Mark A.; Bentez, Diego; Tkatchouk, Ekaterina; Colvin, Michael T.; Carmielli, Raanan; Caldwell, Stuart T.; Rosair, Georgina M.; Hewage, Shanika Gunatilaka; Duclairoir, Florence; Seymour, Jennifer L.; Slawin, Alexandra M.Z.; Goddard, III, William A.; Wasielewski, Michael R.; Cooke, Graeme; Stoddart, J. Fraser

    2010-12-03

    Two [3]catenane 'molecular flasks' have been designed to create stabilized, redox-controlled tetrathiafulvalene (TTF) dimers, enabling their spectrophotometric and structural properties to be probed in detail. The mechanically interlocked framework of the [3]catenanes creates the ideal arrangement and ultrahigh local concentration for the encircled TTF units to form stable dimers associated with their discrete oxidation states. These dimerization events represent an affinity umpolung, wherein the inversion in electronic affinity replaces the traditional TTF-bipyridinium interaction, which is over-ridden by stabilizing mixed-valence (TTF){sub 2}{sup {sm_bullet}+} and radical-cation (TTF{sup {sm_bullet}+}){sub 2} states inside the 'molecular flasks.' The experimental data, collected in the solid state as well as in solution under ambient conditions, together with supporting quantum mechanical calculations, are consistent with the formation of stabilized paramagnetic mixed-valence dimers, and then diamagnetic radical-cation dimers following subsequent one-electron oxidations of the [3]catenanes.

  12. Meteorological and pollutant profiles under very stable conditions

    SciTech Connect (OSTI)

    Wesely, M.L.; Coulter, R.L.

    1983-01-01

    The nocturnal boundary layer (NBL) can become very stable, with wind and temperature increasing rapidly with height and a local wind maximum often occurring near the top of the boundary layer. The wind speed, potential temperature, moisture, and ozone profiles in the NBL above flat terrain were studied by Argonne National Laboratory in the early morning and late evening during the Central Illinois Rainfall Convection Experiment (CIRCE) in July, 1979, with sensors carried aloft by a tethered kytoon. One aim was to examine closely the shape of profiles at heights of about 20 to 200 m by taking measurements at closely spaced height intervals. The tethered balloon was held at each level for a time sufficient for all sensors to come to equilibrium with the local atmosphere; this typically required 2 to 5 min at each level. It was possible to detect changes in spatial trends in profiles in real time, so that smaller height intervals could be used if the changes seemed important. As a result, greater resolution was achieved than is normally obtained with instruments attached to towers or to free balloons.

  13. A Refractory Inclusion Returned by Stardust from Comet 81P/Wild 2

    SciTech Connect (OSTI)

    Simon, S B; Joswiak, D J; Ishii, H A; Bradley, J P; Chi, M; Grossman, L; Al?on, J; Brownlee, D E; Fallon, S; Hutcheon, I D; Matrajt, G; McKeegan, K D

    2008-05-20

    Among the samples returned from comet 81P/Wild 2 by the Stardust spacecraft is a suite of particles from one impact track (Track 25) that are Ca-, Al-rich and FeO-free. We studied three particles from this track that range in size from 5.3 x 3.2 {micro}m to 15 x 10 {micro}m. Scanning and transmission electron microscopy show that they consist of very fine-grained (from {approx}0.5 to {approx}2 {micro}m) Al-rich, Ti-bearing and Ti-free clinopyroxene, Mg-Al spinel, anorthite, perovskite, and osbornite (TiN). In addition to these phases, the terminal particle, named 'Inti', also contains melilite. All of these phases, with the exception of osbornite, are common in refractory inclusions and are predicted to condense at high temperature from a gas of solar composition. Osbornite, though very rare, has also been found in meteoritic refractory inclusions, and could have formed in a region of the nebula where carbon became enriched relative to oxygen compared to solar composition. Compositions of Ti-pyroxene in Inti are similar, but not identical, to those of fassaite from Allende inclusions. Electron energy loss spectroscopy shows that Ti-rich pyroxene in Inti has Ti{sup 3+}/Ti{sup 4+} within the range of typical meteoritic fassaite, consistent with formation under reducing conditions comparable to those of a system of solar composition. Inti is {sup 16}O-rich, with {delta}{sup 18}O {approx} {delta}{sup 17}O {approx} 40{per_thousand}, like unaltered phases in refractory inclusions and refractory IDPs. With grain sizes, mineralogy, mineral chemistry, and an oxygen isotopic composition like those of refractory inclusions, we conclude that Inti is a refractory inclusion that formed in the inner solar nebula. Identification of a particle that formed in the inner Solar System among the comet samples demonstrates that there was transport of materials from the inner to the outer nebula, probably either in a bipolar outflow or by turbulence.

  14. A Stable Zr-Porphyrinic MOF Exhibiting pH-Dependent Fluorescence | Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome A Stable Zr-Porphyrinic MOF Exhibiting pH-Dependent Fluorescence

  15. Highly Stable Porphyrinic Zr-MOFs for CO2 Fixation | Center for Gas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Highly Stable Porphyrinic Zr-MOFs for CO2 Fixation

  16. Giant Nanocrystal Quantum Dots as Stable and Efficient Down-Conversion

    Office of Scientific and Technical Information (OSTI)

    Dots as Stable and Efficient Down-Conversion Phosphor for LED based Solid State Lighting Kundu, Janardan Los Alamos National Laboratory; Ghosh, Yagnaseni Los Alamos...

  17. Method of producing stable metal oxides and chalcogenides and power source

    DOE Patents [OSTI]

    Doddapaneni, Narayan; Ingersoll, David

    1996-01-01

    A method of making chemically and electrochemically stable oxides or other chalcogenides for use as cathodes for power source applications, and of making batteries comprising such materials.

  18. Giant Nanocrystal Quantum Dots as Stable and Efficient Down-Conversion...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Giant Nanocrystal Quantum Dots as Stable and Efficient Down-Conversion Phosphor for LED based Solid State Lighting Citation Details In-Document Search Title: ...

  19. Cupric oxide inclusions in cuprous oxide crystals grown by the floating zone method

    SciTech Connect (OSTI)

    Frazer, Laszlo; Chang, Kelvin B.; Poeppelmeier, Kenneth R.; Ketterson, John B.

    2015-05-08

    Phase-pure cuprous oxide (Cu2O) crystals are difficult to grow since cupric oxide can form within the crystal as the crystal is cooled to ambient conditions. Vacancies are the solute which causes precipitation of macroscopic defects. Therefore, even when a mostly phase-pure single crystal is used as a feed rod, cupric oxide inclusions persist in the recrystallized solid. Control of the thermal profile during crystal growth, however, can improve phase-purity; a slow counter-rotation rate of the feed and seed rods results in fewer inclusions. Cupric oxide can be removed by annealing, which produces a factor of 540 ± 70 increase in phase-purity.

  20. Double spin asymmetries of inclusive hadron electroproductions from a transversely polarized ³He target

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhao, Yuxiang X.

    2015-07-14

    We report the measurement of beam-target double-spin asymmetries ALT in the inclusive production of identified hadrons, e +³He↑ → h + X, using a longitudinally polarized 5.9 GeV electron beam and a transversely polarized ³He target. Hadrons (π±, K± and proton) were detected at 16° with an average momentum h>=2.35 GeV/c and a transverse momentum (pT) coverage from 0.60 to 0.68 GeV/c. Asymmetries from the ³He target were observed to be non-zero for π± production when the target was polarized transversely in the horizontal plane. The π⁺ and π⁻ asymmetries have opposite signs, analogous to the behavior of ALT inmore » semi-inclusive deep-inelastic scattering.« less

  1. Cupric oxide inclusions in cuprous oxide crystals grown by the floating zone method

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Frazer, Laszlo; Chang, Kelvin B.; Poeppelmeier, Kenneth R.; Ketterson, John B.

    2015-05-08

    Phase-pure cuprous oxide (Cu2O) crystals are difficult to grow since cupric oxide can form within the crystal as the crystal is cooled to ambient conditions. Vacancies are the solute which causes precipitation of macroscopic defects. Therefore, even when a mostly phase-pure single crystal is used as a feed rod, cupric oxide inclusions persist in the recrystallized solid. Control of the thermal profile during crystal growth, however, can improve phase-purity; a slow counter-rotation rate of the feed and seed rods results in fewer inclusions. Cupric oxide can be removed by annealing, which produces a factor of 540 ± 70 increase inmore » phase-purity.« less

  2. A Study of the Optical Properties of Ice Crystals with Black Carbon Inclusions

    SciTech Connect (OSTI)

    Arienti, Marco; Yang, Xiaoyuan; Kopacz, Adrian M; Geier, Manfred

    2015-09-01

    The report focu ses on the modification of the optical properties of ice crystals due to atmospheric black car bon (BC) contamination : the objective is to advance the predictive capabilities of climate models through an improved understanding of the radiative properties of compound particles . The shape of the ice crystal (as commonly found in cirrus clouds and cont rails) , the volume fraction of the BC inclusion , and its location inside the crystal are the three factors examined in this study. In the multiscale description of this problem, where a small absorbing inclusion modifies the optical properties of a much la rger non - absorbing particle, state - of - the - art discretization techniques are combined to provide the best compromise of flexibility and accuracy over a broad range of sizes .

  3. CC-inclusive cross section measured with the T2K near detector

    SciTech Connect (OSTI)

    Weber, Alfons

    2015-05-15

    T2K has performed the first measurement of muon neutrino inclusive charged current interactions on carbon at neutrino energies of ?1 GeV where the measurement is reported as a flux-averaged double differential cross section in muon momentum and angle. The flux is predicted by the beam Monte Carlo and external data, including the results from the NA61/SHINE experiment. The data used for this measurement were taken in 2010 and 2011, with a total of 1.08*10{sup 20} protons-on-target. The analysis is performed on 4485 inclusive charged current interaction candidates selected in the most upstream fine-grained scintillator detector of the near detector. The flux-averaged total cross section is = (6.910.13(stat)0.84(syst)) 10{sup ?39} cm{sup 2}/nucleon for a mean neutrino energy of 0.85 GeV.

  4. Measurements of transverse momentum in semi-inclusive deep-inelastic scattering at CLAS

    SciTech Connect (OSTI)

    K.A. Griffioen

    2012-12-01

    With mounting experimental evidence that only a small fraction of the proton's spin comes from the spins of its quarks and gluons, the quest for orbital angular momentum has begun. The parton distributions relevant to this depend on transverse quark momenta. Recent CLAS semi-inclusive deep-inelastic scattering measurements probe these new transverse-momentum-dependent parton distributions using longitudinally polarized beams and targets and detecting {pi}{sup +},{pi}{sup -} and {pi}{sup 0} in the final state.

  5. Inclusive Production of {rho}{+-}(770) Meson in Hadronic Decays of Z0 Boson

    SciTech Connect (OSTI)

    Beddall, A.; Beddall, A.; Binguel, A.

    2007-04-23

    The inclusive production of the charged vector meson {rho}{+-}(770) in hadronic Z decays is measured with the ALEPH detector at the LEP collider. Decays of {rho}{+-} {yields} {pi}0 + {pi}{+-} are reconstructed for x > 0.05 where x = E{rho}/Ebeam. The results are compared with Monte Carlo model predictions and OPAL measurements. Bose-Einstein effects are found to be important in extracting {rho}{+-}(770) from two pion invariant mass spectra.

  6. FRACTIONAL CRYSTALLIZATION LABORATORY TESTING FOR INCLUSION & COPRECIPITATION WITH ACTUAL TANK WASTE

    SciTech Connect (OSTI)

    WARRANT, R.W.

    2006-12-11

    Fractional crystallization is being considered as a pretreatment method to support supplemental treatment of retrieved single-shell tank (SST) saltcake waste at the Hanford Site. The goal of the fractional crystallization process is to optimize the separation of the radioactivity (radionuclides) from the saltcake waste and send it to the Waste Treatment and Immobilization Plant and send the bulk of the saltcake to the supplemental treatment plant (bulk vitrification). The primary factors that influence the separation efficiency are (1) solid/liquid separation efficiency, (2) contaminant inclusions, and (3) co-precipitation. This is a report of testing for factors (2) and (3) with actual tank waste samples. For the purposes of this report, contaminant inclusions are defined as the inclusion of supernatant, containing contaminating radionuclides, in a pocket within the precipitating saltcake crystals. Co-precipitation is defined as the simultaneous precipitation of a saltcake crystal with a contaminating radionuclide. These two factors were tested for various potential fractional crystallization product salts by spiking the composite tank waste samples (SST Early or SST Late, external letter CH2M-0600248, ''Preparation of Composite Tank Waste Samples for ME-21 Project'') with the desired target salt and then evaporating to precipitate that salt. SST Early represents the typical composition of dissolved saltcake early in the retrieval process, and SST Late represents the typical composition during the later stages of retrieval.

  7. Using phylogenetic probes for quantification of stable isotope labeling and microbial community analysis

    DOE Patents [OSTI]

    Brodie, Eoin L; DeSantis, Todd Z; Karaoz, Ulas; Andersen, Gary L

    2014-12-09

    Herein is described methods for a high-sensitivity means to measure the incorporation of stable isotope labeled substrates into RNA following stable isotope probing experiments (SIP). RNA is hybridized to a set of probes such as phylogenetic microarrays and isotope incorporation is quantified such as by secondary ion mass spectrometer imaging (NanoSIMS).

  8. Monolithic amplifier with stable, high resistance feedback element and method for fabricating the same

    DOE Patents [OSTI]

    O'Connor, Paul

    1998-08-11

    A monolithic amplifier includes a stable, high resistance feedback circuit and a dynamic bias circuit. The dynamic bias circuit is formed with active elements matched to those in the amplifier and feedback circuit to compensate for variations in the operating and threshold voltages thereby maintaining a stable resistance in the feedback circuit.

  9. Monolithic amplifier with stable, high resistance feedback element and method for fabricating the same

    DOE Patents [OSTI]

    O`Connor, P.

    1998-08-11

    A monolithic amplifier includes a stable, high resistance feedback circuit and a dynamic bias circuit. The dynamic bias circuit is formed with active elements matched to those in the amplifier and feedback circuit to compensate for variations in the operating and threshold voltages thereby maintaining a stable resistance in the feedback circuit. 11 figs.

  10. Chemical Signatures of and Precursors to Fractures Using Fluid Inclusion Stratigraphy

    SciTech Connect (OSTI)

    Lorie M. Dilley

    2011-03-30

    Enhanced Geothermal Systems (EGS) are designed to recover heat from the subsurface by mechanically creating fractures in subsurface rocks. Open or recently closed fractures would be more susceptible to enhancing the permeability of the system. Identifying dense fracture areas as well as large open fractures from small fracture systems will assist in fracture stimulation site selection. Geothermal systems are constantly generating fractures (Moore, Morrow et al. 1987), and fluids and gases passing through rocks in these systems leave small fluid and gas samples trapped in healed microfractures. These fluid inclusions are faithful records of pore fluid chemistry. Fluid inclusions trapped in minerals as the fractures heal are characteristic of the fluids that formed them, and this signature can be seen in fluid inclusion gas analysis. This report presents the results of the project to determine fracture locations by the chemical signatures from gas analysis of fluid inclusions. With this project we hope to test our assumptions that gas chemistry can distinguish if the fractures are open and bearing production fluids or represent prior active fractures and whether there are chemical signs of open fracture systems in the wall rock above the fracture. Fluid Inclusion Stratigraphy (FIS) is a method developed for the geothermal industry which applies the mass quantification of fluid inclusion gas data from drill cuttings and applying known gas ratios and compositions to determine depth profiles of fluid barriers in a modern geothermal system (Dilley, 2009; Dilley et al., 2005; Norman et al., 2005). Identifying key gas signatures associated with fractures for isolating geothermal fluid production is the latest advancement in the application of FIS to geothermal systems (Dilley and Norman, 2005; Dilley and Norman, 2007). Our hypothesis is that peaks in FIS data are related to location of fractures. Previous work (DOE Grant DE-FG36-06GO16057) has indicated differences in the chemical signature of fluid inclusions between open and closed fractures as well as differences in the chemical signature of open fractures between geothermal systems. Our hypothesis is that open fracture systems can be identified by their FIS chemical signature; that there are differences based on the mineral assemblages and geology of the system; and that there are chemical precursors in the wall rock above open, large fractures. Specific goals for this project are: (1) To build on the preliminary results which indicate that there are differences in the FIS signatures between open and closed fractures by identifying which chemical species indicate open fractures in both active geothermal systems and in hot, dry rock; (2) To evaluate the FIS signatures based on the geology of the fields; (3) To evaluate the FIS signatures based on the mineral assemblages in the fracture; and (4) To determine if there are specific chemical signatures in the wall rock above open, large fractures. This method promises to lower the cost of geothermal energy production in several ways. Knowledge of productive fractures in the boreholes will allow engineers to optimize well production. This information can aid in well testing decisions, well completion strategies, and in resource calculations. It will assist in determining the areas for future fracture enhancement. This will develop into one of the techniques in the 'tool bag' for creating and managing Enhanced Geothermal Systems.

  11. Process for producing an aggregate suitable for inclusion into a radiation shielding product

    DOE Patents [OSTI]

    Lessing, Paul A.; Kong, Peter C.

    2000-01-01

    The present invention is directed to methods for converting depleted uranium hexafluoride to a stable depleted uranium silicide in a one-step reaction. Uranium silicide provides a stable aggregate material that can be added to concrete to increase the density of the concrete and, consequently, shield gamma radiation. As used herein, the term "uranium silicide" is defined as a compound generically having the formula U.sub.x Si.sub.y, wherein the x represents the molecules of uranium and the y represent the molecules of silicon. In accordance with the present invention, uranium hexafluoride is converted to a uranium silicide by contacting the uranium hexafluoride with a silicon-containing material at a temperature in a range between about 1450.degree. C. and about 1750.degree. C. The stable depleted uranium silicide is included as an aggregate in a radiation shielding product, such as a concrete product.

  12. On the role of the Sivers effect in A{sub N} for inclusive particle production in pp collisions

    SciTech Connect (OSTI)

    Anselmino, Mauro; Boglione, Mariaelena; D'Alesio, Umberto; Melis, Stefano; Murgia, Francesco; Prokudin, Alexei

    2014-01-01

    Single spin asymmetries, A{sub N} , for inclusive particle production in pp collisions are considered within a generalized parton model with inclusion of spin and tranverse momentum effects. We consider the potential role of the Sivers effect in A{sub N} , as extracted from a careful analysis of azimuthal asymmetries in SIDIS, and discuss its phenomenological consequences in connection with a recently updated study of the Collins effect.

  13. Short Narrative About Promising Practices The National Nuclear Security Administration's (NNSA) Diversity and Inclusion Implementation Plan was

    National Nuclear Security Administration (NNSA)

    2 Short Narrative About Promising Practices The National Nuclear Security Administration's (NNSA) Diversity and Inclusion Implementation Plan was approved and submitted to the Department on April 13, 2013. NNSA's Office of Human Capital Management participated on a regular basis with the Department of Energy's (DOE) Diversity and Inclusion (D&I) Council in FY 2013. NNSA continues to establish a partnership with the DOE Office of Diversity Programs (ODP) to share information, collaborate and

  14. Measurement of the inclusive B sup * cross section above the. Upsilon. (4 S )

    SciTech Connect (OSTI)

    Akerib, D.S.; Barish, B.; Cowen, D.F.; Eigen, G.; Stroynowski, R.; Urheim, J.; Weinstein, A.J.; Morrison, R.; Schmidt, D.; Procario, M.; Johnson, D.R.; Lingel, K.; Rankin, P.; Smith, J.G.; Alexander, J.; Bebek, C.; Berkelman, K.; Besson, D.; Browder, T.E.; Cassel, D.G.; Cheu, E.; Coffman, D.M.; Drell, P.S.; Ehrlich, R.; Galik, R.S.; Garcia-Sciveres, M.; Geiser, B.; Gittelman, B.; Gray, S.W.; Hartill, D.L.; Heltsley, B.K.; Honscheid, K.; Kandaswamy, J.; Katayama, N.; Kreinick, D.L.; Lewis, J.D.; Ludwig, G.S.; Masui, J.; Mevissen, J.; Mistry, N.B.; Nandi, S.; Ng, C.R.; Nordberg, E.; O'Grady, C.; Patterson, J.R.; Peterson, D.; Pisharody, M.; Riley, D.; Sapper, M.; Selen, M.; Worden, H.; Worris, M.; Avery, P.; Freyberger, A.; Rodriguez, J.; Yelton, J.; Kinoshita, K.; Pipkin, F.; Wilson, R.; Wolinski, J.; Xiao, D.; Sadoff, A.J.; Ammar, R.; Baringer, P.; Coppage, D.; Davis, R.; Haas, P.; Kelly, M.; Kwak, N.; Lam, H.; Ro, S.; Kubota, Y.; Nelson, J.K.; Perticone, D.; Poling, R.; Schrenk, S.; A

    1991-09-23

    Using the CLEO II detector at the Cornell Electron Storage Ring, we have determined the inclusive {ital B}{sup *} cross section above the {Upsilon}(4{ital S}) resonance in the energy range from 10.61 to 10.70 GeV. We also report a new measurement of the energy of the {ital B}{sup *}{r arrow}{ital B}{gamma} transition photon of 46.2{plus minus}0.3{plus minus}0.8 MeV.

  15. Black Warrior: Sub-soil gas and fluid inclusion exploration and slim well drilling

    Broader source: Energy.gov [DOE]

    DOE Geothermal Peer Review 2010 - Presentation. Project Objectives: Discover a blind, low-moderate temperature resource: Apply a combination of detailed sub-soil gas, hydrocarbon, and isotope data to define possible upflow areas; Calibrate the sub-soil chemistry with down-hole fluid inclusion stratigraphy and fluid analyses to define a follow-up exploration drilling target; Create short term jobs and long term employment through resource exploration, development and power plant operation; Extend and adapt the DOE sub-soil 2 meter probe technology to gas sampling.

  16. Partonic Transverse Motion in Unpolarized Semi-Inclusive Deep Inelastic Scattering Processes

    SciTech Connect (OSTI)

    M. Boglione, S. Melis, A. Prokudin

    2011-08-01

    We analyse the role of partonic transverse motion in unpolarized Semi-Inclusive Deep Inelastic Scattering (SIDIS) processes. Imposing appropriate kinematical conditions, we find some constraints which fix an upper limit to the range of allowed k_perp values. We show that, applying these additional requirements on the partonic kinematics, we obtain different results with respect to the usual phenomenological approach based on the Gaussian smearing with analytical integration over an unlimited range of k_perp values. These variations are particularly interesting for some observables, like the < cos phi_h > azimuthal modulation of the unpolarized SIDIS cross section or the average transverse momentum of the final, detected hadron.

  17. AN in inclusive lepton-proton collisions: TMD and twist-3 approaches

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Prokudin, Alexei

    2015-01-23

    We consider the inclusive production of hadrons in lepton-nucleon scattering. For a transversely polarized nucleon this reaction shows a left-right azimuthal asymmetry, which we compute this asymmetry in both TMD and in twist-3 collinear factorization formalisms. All non-perturbative parton correlators of the calculation are fixed through information from other hard processes. Our results for the left-right asymmetry agree in sign with recent data for charged pion production from the HERMES Collaboration and from Jefferson Lab. As a result, we discuss similarities and differences of two formalisms.

  18. Precise Measurements of Beam Spin Asymmetries in Semi-Inclusive π0 production

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aghasyan, M.; Avakian, H.; Rossi, P.; De Sanctis, E.; Hasch, D.; Mirazita, M.; Adikaram, D.; Amaryan, M. J.; Anghinolfi, M.; Baghdasaryan, H.; et al

    2011-10-01

    We present studies of single-spin asymmetries for neutral pion electroproduction in semi-inclusive deep-inelastic scattering of 5.776 GeV polarized electrons from an unpolarized hydrogen target, using the CEBAF Large Acceptance Spectrometer (CLAS) at the Thomas Jefferson National Accelerator Facility. A substantial sin Φh amplitude has been measured in the distribution of the cross section asymmetry as a function of the azimuthal angle Φh of the produced neutral pion. The dependence of this amplitude on Bjorken x and on the pion transverse momentum is extracted with significantly higher precision than previous data and is compared to model calculations.

  19. Influence of germanium nano-inclusions on the thermoelectric power factor of bulk bismuth telluride alloy

    SciTech Connect (OSTI)

    Satyala, Nikhil; Zamanipour, Zahra; Norouzzadeh, Payam; Krasinski, Jerzy S.; Vashaee, Daryoosh; Tahmasbi Rad, Armin; Tayebi, Lobat

    2014-05-28

    Nanocomposite thermoelectric compound of bismuth telluride (Bi{sub 2}Te{sub 3}) with 5 at. % germanium nano-inclusions was prepared via mechanically alloying and sintering techniques. The influence of Ge nano-inclusions and long duration annealing on the thermoelectric properties of nanostructured Bi{sub 2}Te{sub 3} were investigated. It was found that annealing has significant effect on the carrier concentration, Seebeck coefficient, and the power factor of the thermoelectric compound. The systematic heat treatment also reduced the density of donor type defects thereby decreasing the electron concentration. While the as-pressed nanocomposite materials showed n-type properties, it was observed that with the increase of annealing time, the nanocomposite gradually transformed to an abundantly hole-dominated (p-type) sample. The long duration annealing (∼500 h) resulted in a significantly enhanced electrical conductivity pertaining to the augmentation in the density and the structural properties of the sample. Therefore, a simultaneous enhancement in both electrical and Seebeck coefficient characteristics resulted in a remarkable increase in the thermoelectric power factor.

  20. Double spin asymmetries of inclusive hadron electroproductions from a transversely polarized ³He target

    SciTech Connect (OSTI)

    Zhao, Yuxiang X.

    2015-07-14

    We report the measurement of beam-target double-spin asymmetries ALT in the inclusive production of identified hadrons, e +³He → h + X, using a longitudinally polarized 5.9 GeV electron beam and a transversely polarized ³He target. Hadrons (π±, K± and proton) were detected at 16° with an average momentum h>=2.35 GeV/c and a transverse momentum (pT) coverage from 0.60 to 0.68 GeV/c. Asymmetries from the ³He target were observed to be non-zero for π± production when the target was polarized transversely in the horizontal plane. The π⁺ and π⁻ asymmetries have opposite signs, analogous to the behavior of ALT in semi-inclusive deep-inelastic scattering.

  1. Inclusive b-jet production in pp collisions at sqrt(s)=7 TeV

    SciTech Connect (OSTI)

    Chatrchyan, Serguei; et al.

    2012-04-01

    The inclusive b-jet production cross section in pp collisions at a center-of-mass energy of 7 TeV is measured using data collected by the CMS experiment at the LHC. The cross section is presented as a function of the jet transverse momentum in the range 18 < pT < 200 GeV for several rapidity intervals. The results are also given as the ratio of the b-jet production cross section to the inclusive jet production cross section. The measurement is performed with two different analyses, which differ in their trigger selection and b-jet identification: a jet analysis that selects events with a b jet using a sample corresponding to an integrated luminosity of 34 inverse picobarns, and a muon analysis requiring a b jet with a muon based on an integrated luminosity of 3 inverse picobarns. In both approaches the b jets are identified by requiring a secondary vertex. The results from the two methods are in agreement with each other and with next-to-leading order calculations, as well as with predictions based on the PYTHIA event generator.

  2. Investigation of platinum alloys for melting of inclusion free laser glass: Final report

    SciTech Connect (OSTI)

    Izumitani, T.; Toratani, H.; Meissner, H.E.

    1986-02-28

    The objective of this work is to evaluate the suitability of Pt alloys as crucible materials for melting LHG-8 phosphate laser glass. The tendency of forming metallic inclusions and ionic dissolution of alloy components in the glass is to be compared with that of pure Pt. Ionic Pt is introduced into the glass melt by direct dissolution of Pt at the crucible-melt interface and by vapor phase transport. It was felt that a Pt-alloy may behave sufficiently differently from Pt that a number of alloys should be studied. Pt inclusions may originate from Pt which reprecipitates from the glass melt on cooling or change in redox-conditions; from volatilized Pt which deposits in colder zones of the melting environment as crystallites which may drop back into the glass melt; and/or from Pt particles which are mechanically removed from the crucible and drop into the glass melt. Besides pure Pt, the following alloys have been tested: Pt//sup 10/Ir, Pt//sup 10/Rh, Pt//sup 5/Au, Pt-ZGS, Pt//sup 5/Au-ZGS, Pt//sup 10/Rh-ZGS.

  3. Final-state interactions in inclusive deep-inelastic scattering from the deuteron

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cosyn, Wim; Melnitchouk, Wally; Sargsian, Misak M.

    2014-01-16

    We explore the role of final-state interactions (FSI) in inclusive deep-inelastic scattering from the deuteron. Relating the inclusive cross section to the deuteron forward virtual Compton scattering amplitude, a general formula for the FSI contribution is derived in the generalized eikonal approximation, utilizing the diffractive nature of the effective hadron-nucleon interaction. The calculation uses a factorized model with a basis of three resonances with mass W~<2 GeV and a continuum contribution for larger W as the relevant set of effective hadron states entering the final-state interaction amplitude. The results show sizeable on-shell FSI contributions for Bjorken x ~> 0.6 andmore » Q2 < 10 GeV2 increasing in magnitude for lower Q2, but vanishing in the high-Q2 limit due to phase space constraints. The off-shell rescattering contributes at x ~> 0.8 and is taken as an uncertainty on the on-shell result.« less

  4. Method of producing stable metal oxides and chalcogenides and power source

    DOE Patents [OSTI]

    Doddapaneni, N.; Ingersoll, D.

    1996-10-22

    A method is described for making chemically and electrochemically stable oxides or other chalcogenides for use as cathodes for power source applications, and of making batteries comprising such materials. 6 figs.

  5. Forensic Applications of Light-Element Stable Isotope Ratios of Ricinus communis Seeds and Ricin Preparations

    SciTech Connect (OSTI)

    Kreuzer, Helen W.; West, Jason B.; Ehleringer, James

    2013-01-01

    Seeds of the castor plant Ricinus communis, also known as castor beans, are of forensic interest because they are the source of the poison ricin. We have tested whether stable isotope ratios of castor seeds and ricin prepared by various methods can be used as a forensic signature. We collected over 300 castor seed samples from locations around the world and measured the C, N, O, and H stable isotope ratios of the whole seeds, oil, and three types of ricin preparations. Our results demonstrate that N isotope ratios can be used to correlate ricin prepared by any of these methods to source seeds. Further, stable isotope ratios distinguished >99% of crude and purified ricin protein samples in pair-wise comparison tests. Stable isotope ratios therefore constitute a valuable forensic signature for ricin preparations.

  6. L-Aspartate Links for Stable Sodium Metal-Organic Frameworks...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    L-Aspartate Links for Stable Sodium Metal-Organic Frameworks Previous Next List Siman, Peter; Trickett, Christopher A.; Furukawa, Hiroyasu; and Yaghi, Omar M. L-Aspartate Links for...

  7. Topology Guided Design and Syntheses of Stable Mesoporous MOFs with High

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Surface Area | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Topology Guided Design and Syntheses of Stable Mesoporous MOFs with High Surface Area Previous Next List

  8. Vehicle Technologies Office Merit Review 2014: Thermally Stable Ultra-Low Temperature Oxidation Catalysts

    Broader source: Energy.gov [DOE]

    Presentation given by [company name] at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about thermally stable ultra-low...

  9. Stable "superoxide" opens the door to a new class of batteries...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stable "superoxide" opens the door to a new class of batteries By Jared Sagoff * January 12, 2016 Tweet EmailPrint While lithium-ion batteries have transformed our everyday lives, ...

  10. A Small, Clean, Stable Fusion Power Plant ---- Inventor Samuel A. Cohen |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab Small, Clean, Stable Fusion Power Plant ---- Inventor Samuel A. Cohen This invention discloses improvements in magnetic fusion reactor design and operational modes that reduce stability and radioactivity problems by use of a kinetic-regime high-beta device that burns aneutronic fuels, particularly D-3He. The small, clean stable fusion power plant, based on the Field Reverse Configuration, operates in the 5-megawatt range and would have applications in distributed

  11. Generation of Stable Sub-femtosecond Hard X-ray pulses with Optimized

    Office of Scientific and Technical Information (OSTI)

    Nonlinear Bunch Compression (Journal Article) | SciTech Connect Generation of Stable Sub-femtosecond Hard X-ray pulses with Optimized Nonlinear Bunch Compression Citation Details In-Document Search Title: Generation of Stable Sub-femtosecond Hard X-ray pulses with Optimized Nonlinear Bunch Compression Authors: Huang, Senlin ; /Peking U., Heavy Ion Phys. ; Ding, Yuantao ; Huang, Zhirong ; /SLAC ; Qiang, Ji ; /LBNL, Berkeley Publication Date: 2014-10-21 OSTI Identifier: 1160308 Report

  12. Generation of stable subfemtosecond hard x-ray pulses with optimized

    Office of Scientific and Technical Information (OSTI)

    nonlinear bunch compression (Journal Article) | SciTech Connect stable subfemtosecond hard x-ray pulses with optimized nonlinear bunch compression Citation Details In-Document Search Title: Generation of stable subfemtosecond hard x-ray pulses with optimized nonlinear bunch compression Authors: Huang, Senlin ; Ding, Yuantao ; Huang, Zhirong ; Qiang, Ji Publication Date: 2014-12-15 OSTI Identifier: 1181562 Grant/Contract Number: 2011CB808301; AC02-05CH11231; AC02-76SF00515 Type: Published

  13. Giant Nanocrystal Quantum Dots as Stable and Efficient Down-Conversion

    Office of Scientific and Technical Information (OSTI)

    Phosphor for LED based Solid State Lighting (Technical Report) | SciTech Connect Technical Report: Giant Nanocrystal Quantum Dots as Stable and Efficient Down-Conversion Phosphor for LED based Solid State Lighting Citation Details In-Document Search Title: Giant Nanocrystal Quantum Dots as Stable and Efficient Down-Conversion Phosphor for LED based Solid State Lighting Authors: Kundu, Janardan [1] ; Ghosh, Yagnaseni [1] ; Dennis, Allison M. [1] ; Htoon, Han [1] ; Hollingsworth, Jennifer A

  14. Thermally Stable Electrolyte For Li-ion Cells. (Conference) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Thermally Stable Electrolyte For Li-ion Cells. Citation Details In-Document Search Title: Thermally Stable Electrolyte For Li-ion Cells. Abstract not provided. Authors: Nagasubramanian, Ganesan ; Orendorff, Christopher J. Publication Date: 2011-09-01 OSTI Identifier: 1106400 Report Number(s): SAND2011-7083C 464734 DOE Contract Number: AC04-94AL85000 Resource Type: Conference Resource Relation: Conference: The Knowledge Foundation's 2nd Annual International Conference held November

  15. Low-lying dipole response in the stable {sup 40,48}Ca nuclei with the second random-phase approximation

    SciTech Connect (OSTI)

    Gambacurta, D.; Catara, F.

    2011-09-15

    Low-energy dipole excitations are analyzed for the stable isotopes {sup 40}Ca and {sup 48}Ca in the framework of the Skyrme-second random-phase approximation. The corresponding random-phase approximation calculations provide a negligible strength distribution for both nuclei in the energy region from 5 to 10 MeV. The inclusion and the coupling of 2 particle-2 hole configurations in the second random-phase approximation lead to an appreciable dipole response at low energies for the neutron-rich nucleus {sup 48}Ca. The presence of a neutron skin in the nucleus {sup 48}Ca would suggest the interpretation of the low-lying response in terms of a pygmy excitation. The composition of the excitation modes (content of 1 particle-1 hole and 2 particle-2 hole configurations), their transition densities and their collectivity (number and coherence of the different contributions) are analyzed. This analysis indicates that, in general, these excitations cannot be clearly interpreted in terms of oscillations of the neutron skin against the core with the exception of the peak with the largest B(E1) value, which is located at 9.09 MeV. For this peak the neutron transition density dominates and the neutron and proton transition densities oscillate out of phase in the internal part of the nucleus leading to a strong mixing of isoscalar and isovector components. Therefore, this state shows some features usually associated to pygmy resonances.

  16. Exclusive and inclusive decays of B mesons into D sub s mesons

    SciTech Connect (OSTI)

    Bortoletto, D.; Goldberg, M.; Horwitz, N.; Jain, V.; Mestayer, M.D.; Moneti, G.C.; Sharma, V.; Shipsey, I.P.J.; Skwarnicki, T.; Thulasidas, M.; Csorna, S.E.; Letson, T.; Alexander, J.; Artuso, M.; Bebek, C.; Berkelman, K.; Cassel, D.G.; Cheu, E.; Coffman, D.M.; Crawford, G.; DeWire, J.W.; Drell, P.S.; Ehrlich, R.; Galik, R.S.; Gittelman, B.; Gray, S.W.; Halling, A.M.; Hartill, D.L.; Heltsley, B.K.; Kandaswamy, J.; Katayama, N.; Kreinick, D.L.; Lewis, J.D.; Mistry, N.B.; Mueller, J.; Namjoshi, R.; Nandi, S.; Nordberg, E.; O'Grady, C.; Peterson, D.; Pisharody, M.; Riley, D.; Sapper, M.; Silverman, A.; Stone, S.; Worden, H.; Worris, M.; Sadoff, A.J.; Avery, P.; Besson, D.; Garren, L.; Yelton, J.; Bowcock, T.; Kinoshita, K.; Pipkin, F.M.; Procario, M.; Wilson, R.; Wolinski, J.; Xiao, D.; Ammar, R.; Baringer, P.; Coppage, D.; Haas, P.; Lam, H.; Jawahery, A.; Park, C.H.; Kubota, Y.; Nelson, J.K.; Perticone, D.; Poling, R.; Fulton, R.; Hempstead, M.; Jensen, T.; Johnson, D.R.; Kagan, H.; Kass

    1990-04-30

    We have studied the production of {ital D}{sub {ital s}} mesons in the decays of {ital B} mesons at the {Upsilon}(4{ital S}) resonance. We report on the first observation of exclusive {ital B}-meson decays {ital B}{r arrow}{ital D}{sub {ital s}}{sup {minus}}{ital D*}{sup +}, {ital B}{r arrow}{ital D}{sub {ital s}}{sup {minus}}{ital D}{sup +}, and {ital B}{r arrow}{ital D}{sub {ital s}}{sup {minus}}{ital D}{sup 0}. We also present a new measurement of the branching ratio and the momentum spectrum for the inclusive decay {ital B}{r arrow}{ital D}{sub {ital s}X}.

  17. Inclusion free cadmium zinc tellurium and cadmium tellurium crystals and associated growth method

    DOE Patents [OSTI]

    Bolotnikov, Aleskey E.; James, Ralph B.

    2010-07-20

    The present disclosure provides systems and methods for crystal growth of cadmium zinc tellurium (CZT) and cadmium tellurium (CdTe) crystals with an inverted growth reactor chamber. The inverted growth reactor chamber enables growth of single, large, high purity CZT and CdTe crystals that can be used, for example, in X-ray and gamma detection, substrates for infrared detectors, or the like. The inverted growth reactor chamber enables reductions in the presence of Te inclusions, which are recognized as an important limiting factor in using CZT or CdTe as radiation detectors. The inverted growth reactor chamber can be utilized with existing crystal growth techniques such as the Bridgman crystal growth mechanism and the like. In an exemplary embodiment, the inverted growth reactor chamber is a U-shaped ampoule.

  18. Recent Results of Semi-inclusive DIS Experiments at Jefferson Lab

    SciTech Connect (OSTI)

    Allada, Kalyan

    2015-09-01

    Semi-inclusive deep inelastic scattering (SIDIS) is a powerful tool to explore the 3-d structure of nucleon in momentum space. Through a combination of polarized or unpolarized lepton beam and nucleon target one can study various transverse-momentum dependent parton distribution functions (TMDs) that appear in the SIDIS cross-section. TMDs provide a description of nucleon structure in terms of parton’s transverse momentum and its transverse spin, which enables us to study the quark orbital angular momentum effects in the nucleon. Several SIDIS experiments were performed in three experimental halls at JLab with 6 GeV electron beam using both polarized or upolarized beam and target combinations. The kinematic range was mainly focued on valence quark region. In this proceeding we will discuss some of the recent results from JLab 6 GeV run.

  19. Inclusive J/{psi} Production in {Upsilon} Decay Via Color-Singlet Mechanism

    SciTech Connect (OSTI)

    He Zhiguo; Wang Jianxiong

    2011-05-23

    We report the recent works about the inclusive J/{psi} production in {Upsilon} decay. Our results show that until now the color-singlet (CS) contribution which includes leading order ({alpha}{sub s}{sup 5}){Upsilon}{yields}J/{psi}+cc-barg process and {alpha}{sub s}{sup 6} order {Upsilon}{yields}J/{psi}+gg(4g) process as well as {alpha}{sub s}{sup 2{alpha}2} order {Upsilon}{yields}J/{psi}+cc-bar and {Upsilon}{yields}J/{psi}+gg processes can not explain the experimental data yet. A preliminary CS prediction of R{sub cc} (B({Upsilon}{yields}J/{psi}+cc-bar+X)/B({Upsilon}{yields}J/{psi}+X)) 0.39{sub -0.20}{sup +0.21}, which is much larger than color-octet (CO) prediction, is also given as a good quantity to discriminate the CS and color-octet mechanism.

  20. Low-Potential Stable NADH Detection at Carbon-Nanotube-Modified Glassy Carbon Electrodes

    SciTech Connect (OSTI)

    Musameh, Mustafa; Wang, Joseph; Merkoci, Arben; Lin, Yuehe )

    2002-11-22

    Carbon-nanotube (CNT) modified glassy-carbon electrodes exhibiting strong and stable electrocatalytic response toward NADH are described. A substantial (490 mV) decrease in the overvoltage of the NADH oxidation reaction (compared to ordinary carbon electrodes) is observed using single-wall and multi-wall carbon-nanotube coatings, with oxidation starting at ca.?0.05V (vs. Ag/AgCl; pH 7.4). Furthermore, the NADH amperometric response of the coated electrodes is extremely stable, with 96 and 90% of the initial activity remaining after 60min stirring of 2x10-4M and 5x10-3M NADH solutions, respectively (compared to 20 and 14% at the bare surface). The CNT-coated electrodes thus allow highly-sensitive, low-potential, stable amperometric sensing. Such ability of carbon-nanotubes to promote the NADH electron-transfer reaction suggests great promise for dehydrogenase-based amperometric biosensors.

  1. A highly stable DC power supply for precision magnetic field measurements and other purposes

    SciTech Connect (OSTI)

    Ino, Takashi

    2012-04-15

    A homogeneous magnetic field is essential for the {sup 3}He neutron spin filter used to polarize neutron beams and analyze neutron spins in neutron scattering. The required spatial uniformity of the magnetic field is on the order of 10{sup -4}/cm or less. To measure such uniformity, one needs a DC current source with a current stability much better than 10{sup -4}. However, laboratory DC power supplies, which are commonly used in many {sup 3}He neutron spin filters, do not have such stabilities. To attain a highly stable current with a common laboratory DC power supply for every {sup 3}He neutron spin filter, a simple feedback circuit has been developed to keep the output current stable up to 10{sup -6}. Such a highly stable current or voltage from a common laboratory DC power supply can also be used for various other research applications.

  2. Stable and 'bounded excursion' gravastars, and black holes in Einstein's theory of gravity

    SciTech Connect (OSTI)

    Rocha, P; Da Silva, M F A; Wang, Anzhong; Chan, R E-mail: chan@on.br E-mail: anzhong_wang@baylor.edu

    2008-11-15

    Dynamical models of prototype gravastars are constructed and studied. The models are the Visser-Wiltshire three-layer gravastars, in which an infinitely thin spherical shell of a perfect fluid with the equation of state p = (1-{gamma}){sigma} divides the whole spacetime into two regions, where the internal region is de Sitter, and the external one is Schwarzschild. When {gamma}<1 and {Lambda}{ne}0, it is found that in some cases the models represent stable gravastars, and in some cases they represent 'bounded excursion' stable gravastars, where the thin shell is oscillating between two finite radii, while in some other cases they collapse until the formation of black holes occurs. However, when {gamma}{>=}1, even with {Lambda}{ne}0, only black holes are found. In the phase space, the region for both stable gravastars and 'bounded excursion' gravastars is very small in comparison to that for black holes, although it is not completely empty.

  3. Stable formation of ultrahigh power-density 248 nm channels in Xe cluster targets

    SciTech Connect (OSTI)

    Borisov, Alex B.; Racz, Ervin; Khan, Shahab F.; Poopalasingam, Sankar; McCorkindale, John C.; Boguta, John; Longworth, James W.; Rhodes, Charles K.

    2012-07-11

    The optimization of relativistic and ponderomotive self-channeling of ultra-powerful 248 nm laser pulses launched in underdense plasmas with an appropriate longitudinal gradient in the electron density profile located at the initial stage of the self-channeling leads to (1) stable channel formation and (2) highly efficient power compression producing power densities in the 10{sup 19}-10{sup 20} W/cm{sup 3} range. The comparison of theoretical studies with experimental results involving the correlation of (a) Thomson images of the electron density with (b) x-ray images of the channel morphology demonstrates that more than 90% of the incident 248 nm power can be trapped in stable channels and that this stable propagation can be extended to power levels significantly exceeding the critical power of the self-channeling process.

  4. Generation of low work function, stable compound thin films by laser ablation

    DOE Patents [OSTI]

    Dinh, Long N.; McLean, II, William; Balooch, Mehdi; Fehring, Jr., Edward J.; Schildbach, Marcus A.

    2001-01-01

    Generation of low work function, stable compound thin films by laser ablation. Compound thin films with low work function can be synthesized by simultaneously laser ablating silicon, for example, and thermal evaporating an alkali metal into an oxygen environment. For example, the compound thin film may be composed of Si/Cs/O. The work functions of the thin films can be varied by changing the silicon/alkali metal/oxygen ratio. Low work functions of the compound thin films deposited on silicon substrates were confirmed by ultraviolet photoelectron spectroscopy (UPS). The compound thin films are stable up to 500.degree. C. as measured by x-ray photoelectron spectroscopy (XPS). Tests have established that for certain chemical compositions and annealing temperatures of the compound thin films, negative electron affinity (NEA) was detected. The low work function, stable compound thin films can be utilized in solar cells, field emission flat panel displays, electron guns, and cold cathode electron guns.

  5. Unpolarised TMD Distribution and Fragmentation Functions from recent HERMES and COMPASS Semi-inclusive Deep Inelastic Scattering Multiplicities

    SciTech Connect (OSTI)

    Prokudin, Alexey; Anselmino, Mauro; Boglione, Mariaelena; Melis, Stefano; Gonzalez, J. O.

    2014-10-01

    The unpolarised transverse momentum dependent distribution and fragmentation functions (TMDs) are extracted from HERMES and COMPASS experimental measurements of semi- inclusive deep inelastic scattering multiplicities for charged hadron production. A simple factorised functional form of the TMDs is adopted, with a Gaussian dependence on the intrinsic transverse momentum, which turns out to be quite adequate in shape.

  6. Measurement of pretzelosity asymmetry of charged pion production in semi-inclusive deep inelastic scattering on a polarized He target

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Y.; Qian, X.; Allada, K.; Dutta, C.

    2014-11-01

    An experiment to measure single-spin asymmetries in semi-inclusive production of charged pions in deep-inelastic scattering on a transversely polarized He target was performed at Jefferson Lab in the kinematic region of 0.16 on He3 and on neutron pretzelosity asymmetries are consistent with zero within experimental uncertainties.

  7. High-Efficiency and Stable White Organic Light-Emitting Diode Using a Single Emitter

    Broader source: Energy.gov [DOE]

    This project is demonstrating an efficient and stable white organic light-emitting diode (WOLED) using a single emitter on a planar glass substrate. Current WOLED technology requires the use of multiple emissive materials, which are expensive to manufacture and also generate color instability and color aging issues, affecting WOLED performance and operational lifetime.

  8. Air-stable ink for scalable, high-throughput layer deposition

    DOE Patents [OSTI]

    Weil, Benjamin D; Connor, Stephen T; Cui, Yi

    2014-02-11

    A method for producing and depositing air-stable, easily decomposable, vulcanized ink on any of a wide range of substrates is disclosed. The ink enables high-volume production of optoelectronic and/or electronic devices using scalable production methods, such as roll-to-roll transfer, fast rolling processes, and the like.

  9. Ultratough, Thermally Stable Polycrystalline Diamond/Silicon Carbide Nanocomposites for Drill Bits

    SciTech Connect (OSTI)

    2009-03-01

    This factsheet describes a research project whose goal is to develop and produce in quantity novel superhard and ultratough thermally stable polycrystalline (TSP) diamond/SiC nanocomposites reinforced with SiC/C nanofibers for drill-bit applications and multiple industrial functions.

  10. Three-dimensional CTOA and constraint effects during stable tearing in a thin-sheet material

    SciTech Connect (OSTI)

    Dawicke, D.S.; Newman, J.C. Jr.; Bigelow, C.A.

    1995-12-31

    A small strain theory, three-dimensional elastic-plastic finite element analysis was used to simulate fracture in thin sheet 2024-T3 aluminum alloy in the T-L orientation. Both straight and tunneled cracks were modeled. The tunneled crack front shapes as a function of applied stress were obtained from the fracture surface of tested specimens. The stable crack growth behavior was measured at the specimen surface as a function of applied stress. The fracture simulation modeled the crack tunneling and extension as a function of applied stress. The results indicated that the global constrain factor, {alpha}{sub g}, initially dropped during stable crack growth. After peak applied stress was achieved, {alpha}{sub g}, initially dropped during stable crack growth. After peak applied stress was achieved, {alpha}{sub g}, began to increase slightly. The effect of crack front shape on {alpha}{sub g} was small, but the crack front shape did greatly influence the local constraint and through-thickness crack-tip opening angle (CTOA) behavior. The surface values of CTOA for the tunneled crack front model agreed well with experimental measurements, showing the same initial decrease from high values during the initial 3 mm of crack growth at the specimen`s surface. At the same time, the interior CTOA values increased from low angles. After the initial stable tearing region, the CTOA was constant through the thickness. The three-dimensional analysis appears to confirm the potential of CTOA as a two-dimensional fracture criterion.

  11. Stable carbonous catalyst particles and method for making and utilizing same

    DOE Patents [OSTI]

    Ganguli, Partha S.; Comolli, Alfred G.

    2005-06-14

    Stable carbonous catalyst particles composed of an inorganic catalytic metal/metal oxide powder and a carbonaceous binder material are formed having a basic inner substantially uniform-porous carbon coating of the catalytic powder, and may include an outer porous carbon coating layer. Suitable inorganic catalytic powders include zinc-chromite (ZnO/Cr.sub.2 03) and suitable carbonaceous liquid binders having molecular weight of 200-700 include partially polymerized furfuryl alcohol, which are mixed together, shaped and carbonized and partially oxidized at elevated temperature. Such stable carbonous catalyst particles such as 0.020-0.100 inch (0.51-2.54 mm) diameter extrudates, have total carbon content of 2-25 wt. % and improved crush strength of 1.0-5 1b/mn, 50-300 m.sup.2 /g surface area, and can be advantageously utilized in fixed bed or ebullated/fluidized bed reactor operations. This invention also includes method steps for making the stable carbonous catalyst particles having improved particle strength and catalytic activity, and processes for utilizing the active stable carbonous carbon-coated catalysts such as for syn-gas reactions in ebullated/fluidized bed reactors for producing alcohol products and Fischer-Tropsch synthesis liquid products.

  12. Stable isotope studies. Final report, March 1, 1972--February 29, 1992

    SciTech Connect (OSTI)

    Ishida, T.

    1992-10-01

    The research has been in four general areas: (1) correlation of isotope effects with molecular forces and molecular structures, (2) correlation of zero-point energy and its isotope effects with molecular structure and molecular forces, (3) vapor pressure isotope effects, and (4) fractionation of stable isotopes. 73 refs, 38 figs, 29 tabs.

  13. Noniterative Inclusion of the Triply and Quadruply Excited Clusters: The Locally Renormalized Perspective

    SciTech Connect (OSTI)

    Kowalski, Karol; De Jong, Wibe A.

    2006-08-31

    Noniterative inclusion of the higher=order clusters has been a subject of intensive studies aimed at developing a well balanced description of individual many-body contributions for entire ground-state potential energy surfaces. In traditional approaches, the connected quadruples are estimated directly based on perturbative arguments, which leads to excellent agreement with full CI results near the equilibrium geometry and increasingly worse energies for larger internuclear stretches. As a possible improvement to this situation, two techniques are considered as especially promising: perturbative approaches based on the similarity transformed Hamiltonians and renormalization schemes both in global and local formulation. Following the latter strategy we adopted the recently introduced Numerator-Denominator Connected expansion (NDC) [ K. Kowalski, P. Piecuch, J. Chem. Phys. 122 (2005) [074107] as an effective tool for designing new forms of noniterative corrections accounting for the joint effect of triples and quadruples. The performance of the ensuing locally renormalized CCSD(TQ) approaches (LR-CCSD(TQ) is illustrated on several examples that require either going beyond the triples approximation or describing very subtle effects encountered in Van der Waals complexes. Comparisons with other noniterative approaches are also made and some issues regarding the size-extensivity of the locally renormalized methods are addressed.

  14. Semi-inclusive studies of semileptonic B-s decays at Belle

    SciTech Connect (OSTI)

    Oswald, Christian; Urquijo, P.; Dingfelder, J.; Abdesselam, A.; Adachi, I.; Aihara, H.; Al Said, S.; Asner, David M.; Aushev, T.; Ayad, R.; Babu, V.; Badhrees, I.; Bakich, A. M.; Bhardwaj, V.; Bobrov, A.; Bonvicini, Giovanni; Bozek, A.; Bracko, Marko; Browder, Thomas E.; Cervenkov, D.; Chang, M-C; Chekelian, V.; Chen, A.; Cheon, B. G.; Chilikin, K.; Cho, K.; Chobanova, V.; Choi, Y.; Cinabro, David A.; Dalseno, J.; Dolezal, Z.; Drasal, Z.; Drutskoy, A.; Dutta, D.; Eidelman, S.; Farhat, H.; Fast, James E.; Ferber, T.; Frost, O.; Fulsom, Bryan G.; Gaur, Vipin; Gabyshev, N.; Ganguly, Sudeshna; Garmash, A.; Getzkow, D.; Gillard, R.; Glattaur, R.; Goh, Y. M.; Goldenzweig, P.; Golob, B.; Grzymkowska, O.; Hara, Takanori; Hasenbusch, J.; Hayasaka, K.; Hayashii, H.; He, X. H.; Hou, W. S.; Huschle, Matthias J.; Hyun, H. J.; Iijima, T.; Ishikawa, A.; Itoh, R.; Iwasaki, Y.; Jaegle, Igal; Julius, T.; Kang, K. H.; Kapusta, P.; Kato, E.; Kawasaki, T.; Kiesling, C.; Kim, D. Y.; Kim, J. B.; Kim, J. H.; Kim, K. T.; Kim, M. J.; Kim, S. H.; Kim, Y. J.; Kinoshita, Kay; Ko, Byeong Rok; Kodys, P.; Korpar, S.; Krizan, P.; Krokovny, Pavel; Kuhr, T.; Kumita, T.; Kwon, Y. J.; Lange, J. S.; Lee, D. H.; Lee, I. S.; Li, Y.; Gioi, LL; Libby, J.; Liventsev, D.; Lukin, P.; Matvienko, D.; Miyata, H.; Mizuk, R.; Mohanty, G. B.; Moll, A.; Moon, H K.; Nakano, E.; Nakao, M.; Nakazawa, H.; Nanut, T.; Natkaniec, Z.; Nayak, Minakshi; Nishida, S.; Nozaki, T.; Okuno, S.; Pakhlov, P.; Pakhlova, G.; Park, C. W.; Park, H.; Pedlar, Todd; Pesantez, L.; Pestotnik, R.; Petric, M.; Piilonen, Leo E.; Pulvermacher, C.; Ribezl, Eva; Ritter, M.; Rostomyan, A.; Rozanska, M.; Ryu, S.; Sakai, Y.; Sandilya, Saurabh; Santelj, L.; Sanuki, T.; Sato, Y.; Savinov, Vladimir; Schneider, O.; Schnell, G.; Schwanda, C.; Semmler, D.; Senyo, K.; Seon, O.; Sevior, ME; Shapkin, M.; Shebalin, V.; Shen, CP; Shibata, TA; Shiu, Jing-Ge; Sibidanov, A.; Simon, F.; Sohn, Y. S.; Solovieva, E.; Stanic, S.; Staric, M.; Stypula, J.; Sumihama, M.; Sumiyoshi, T.; Tamponi, Umberto; Teramoto, Y.; Trabelsi, K.; Uchida, M.; Unno, Y.; Uno, S.; Usov, Y.; Van Hulse, C.; Vanhoefer, P.; Varner, G.; Vinokurova, A.; Vorobyev, V.; Vossen, Anslem G.; Wagner, M. N.; Wang, C. H.; Wang, M. Z.; Wang, P.; Wang, Xiaolong; Watanabe, Y.; Williams, K. M.; Won, E.; Yamamoto, H.; Yashchenko, S.; Yook, Youngmin; Zhang, Z. P.; Zhilich, V.; Zhulanov, V.; Zupanc, A.

    2015-10-22

    We present an analysis of the semi-inclusive decays B-s -> D(s)(-)Xl(+)nu and B-s -> D-s*(-)Xl(+)nu, where X denotes a final state that may consist of additional hadrons or photons and l is an electron or muon. The studied Bs decays are contained in the 121.4 fb(-1) Upsilon(5S) data sample collected by the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. The branching fractions of the decays are measured to be B(B-s -> D(s)(-)Xl(+)nu) = [8.2 +/- 0.2(stat) +/- 0.6(syst) +/- 1.4(ext)] % and B(B-s -> D-s*(-)Xl(+)nu) = [5.4 +/- 0.4(stat) +/- 0.4(syst) +/- 0.9(ext)] %, where the first two uncertainties are statistical and systematic and the last is due to external parameters. The measurement also provides an estimate of the B-s(()*())(B) over bar (()(s)*()) production cross section, sigma(e(+)e(-) -> B-s(()*())(B) over bar (()(s)*())) = 53.8 +/- 1.4(stat) +/- 4.0(syst) +/- 3.4(ext)] pb, at the center-of-mass energy root s = 10.86 GeV.

  15. Inclusive J/{psi} production in {Upsilon} decay via color-singlet mechanism

    SciTech Connect (OSTI)

    He Zhiguo; Wang Jianxiong

    2010-03-01

    In this work, we have calculated the tree level color-singlet contribution to the inclusive J/{psi} production in {Upsilon} decay of the {alpha}{sub s}{sup 5} order QCD process {Upsilon}{yields}J/{psi}+ccg and {alpha}{sup 2{alpha}}{sub s}{sup 2} order QED processes {Upsilon}{yields}{gamma}*{yields}J/{psi}+cc and {Upsilon}{yields}J/{psi}+gg. It is found that the contribution of the QED processes is comparable with that of the QCD process and the numerical results of the QCD process alone are about an order of magnitude smaller than the previous theoretical predictions. Our prediction in total is 4.2x10{sup -5} which is about an order of magnitude smaller than the recent CLEO measurement on the branching fraction B({Upsilon}{yields}J/{psi}+X). It indicates that the J/{psi} production mechanism in {Upsilon} decay is not well understood and further theoretical work and experimental analysis are still necessary.

  16. Construction of energy-stable projection-based reduced order models

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kalashnikova, Irina; Barone, Matthew F.; Arunajatesan, Srinivasan; van Bloemen Waanders, Bart G.

    2014-12-15

    Our paper aims to unify and extend several approaches for building stable projection-based reduced order models (ROMs) using the energy method and the concept of “energy-stability”. Attention is focused on linear time-invariant (LTI) systems. First, an approach for building energy stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of partial differential equations (PDEs) using continuous projection is proposed. The key idea is to apply to the system a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The result of this procedure will be a ROM that is energy-stablemore » for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special inner product, termed the “symmetry inner product”. Next, attention is turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, termed the “Lyapunov inner product”, is derived. Moreover, it is shown that the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system ari sing from the discretization of a system of PDEs in space. Projection in this inner product guarantees a ROM that is energy-stable, again for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. We also made comparisons between the symmetry inner product and the Lyapunov inner product. Performance of ROMs constructed using these inner products is evaluated on several benchmark test cases.« less

  17. Stable isotopic study of precipitation and spring discharge on the Nevada Test Site

    SciTech Connect (OSTI)

    Ingraham, N.L.; Jacobson, R.L.; Hess, J.W.; Lyles, B.F. . Water Resources Center Nevada Univ., Reno, NV . Water Resources Center)

    1990-07-01

    Precipitation was collected in southern Nevada (on the Nevada Test Site) on a semi-regular monthly basis at 41 locations for six years for stable isotopic analysis. The precipitation record shows two time-based regimes. For the first three years of collection, the precipitation was highly variable with several large events and several dry periods. During the last three years of collection, the precipitation was much more even with no large events. However, there is no correlation between the variability in the amount of precipitation and the stable isotopic composition of precipitation. In addition, the oxygen isotope composition and discharge of two springs, Whiterock Spring and Cane Spring, issuing from perched water tables, were monitored for five years in a similar time frame as for the precipitation. 17 refs., 42 figs., 3 tabs.

  18. Integration of stable isotope and trace contaminant concentration for enhanced forensic acetone discrimination

    SciTech Connect (OSTI)

    Moran, James J.; Ehrhardt, Christopher J.; Wahl, Jon H.; Kreuzer, Helen W.; Wahl, Karen L.

    2013-07-18

    We analyzed 21 neat acetone samples from 15 different suppliers to demonstrate the utility of a coupled stable isotope and trace contaminant strategy for distinguishing forensically-relevant samples. By combining these two pieces of orthogonal data we could discriminate all of the acetones that were produced by the 15 different suppliers. Using stable isotope ratios alone, we were able to distinguish 9 acetone samples, while the remaining 12 fell into four clusters with highly similar signatures. Adding trace chemical contaminant information enhanced discrimination to 13 individual acetones with three residual clusters. The acetones within each cluster shared a common manufacturer and might, therefore, not be expected to be resolved. The data presented here demonstrates the power of combining orthogonal data sets to enhance sample fingerprinting and highlights the role disparate data could play in future forensic investigations.

  19. Measurement of pretzelosity asymmetry of charged pion production in semi-inclusive deep inelastic scattering on a polarized He target

    SciTech Connect (OSTI)

    Zhang, Y.; Qian, X.; Allada, K.; Dutta, C.

    2014-11-01

    An experiment to measure single-spin asymmetries in semi-inclusive production of charged pions in deep-inelastic scattering on a transversely polarized He target was performed at Jefferson Lab in the kinematic region of 0.16 < x < 0.35 and 1.4 < Q < 2.7 GeV. Our results show that both ? on He3 and on neutron pretzelosity asymmetries are consistent with zero within experimental uncertainties.

  20. Advanced thermally stable jet fuels. Technical progress report, July 1995--September 1995

    SciTech Connect (OSTI)

    Schobert, H.H.; Eser, S.; Song, C.

    1995-10-01

    The Penn State program in advanced thermally stable jet engine fuels has five components: development of mechanisms of degradation and solids formation; quantitative measurement of growth of sub-micrometer-sized and micrometer particles suspended in fuels during thermal stresses; characterization of carbonaceous deposits by various instrumental and microscopic methods; elucidation of the role of additives in retarding the formation of carbonaceous solids; and assessment of the potential of producing high yields of cycloalkanes and hydroaromatics by direct coal liquefaction. Progress is described.

  1. Advanced thermally stable jet fuels. Technical progress report, April 1996--June 1996

    SciTech Connect (OSTI)

    Schobert, H.H.; Eser, S.; Song, C.

    1996-11-01

    The Penn State program in advanced thermally stable jet fuels has five components: (1) development of mechanisms of degradation and solids formation: (2) quantitative measurement of growth of sub-micrometer and micrometer-sized particles during thermal stressing; (3) characterization of carbonaceous deposits by various instrumental and microscopic methods: (4) elucidation of the role of additives in retarding the formation of carbonaceous solids; and (5) assessment of the potential of producing high yields of cycloalkanes and hydroaromatics from coal.

  2. Magnetic properties of MnSb inclusions formed in GaSb matrix directly during molecular beam epitaxial growth

    SciTech Connect (OSTI)

    Lawniczak-Jablonska, Krystyna; Wolska, Anna; Klepka, Marcin T.; Kret, Slawomir; Kurowska, Boguslawa; Kowalski, Bogdan J.; Twardowski, Andrzej; Wasik, Dariusz; Kwiatkowski, Adam; Sadowski, Janusz

    2011-04-01

    Despite of intensive search for the proper semiconductor base materials for spintronic devices working at room temperature no appropriate material based on ferromagnetic semiconductors has been found so far. We demonstrate that the phase segregated system with MnSb hexagonal inclusions inside the GaSb matrix, formed directly during the molecular beam epitaxial growth reveals the ferromagnetic properties at room temperature and is a good candidate for exploitation in spintronics. Furthermore, the MnSb inclusions with only one crystalline structure were identified in this GaMn:MnSb granular material. The SQUID magnetometry confirmed that this material exhibits ferromagnetic like behavior starting from helium up to room temperature. Moreover, the magnetic anisotropy was found which was present also at room temperature, and it was proved that by choosing a proper substrate it is possible to control the direction of easy axis of inclusions' magnetization moment between in-plane and out-of-plane; the latter is important in view of potential applications in spintronic devices.

  3. Diamonds in the rough: a strong case for the inclusion of weak-intensity X-ray diffraction data

    SciTech Connect (OSTI)

    Wang, Jimin; Wing, Richard A.

    2014-05-01

    Here, new evidence is provided to show that the inclusion of weak-intensity, high-resolution X-ray diffraction data helps to improve the quality of experimental phases by imposing proper constraints on electron-density models during noncrystallographic symmetry averaging. Overwhelming evidence exists to show that the inclusion of weak-intensity, high-resolution X-ray diffraction data helps improve the refinement of atomic models by imposing strong constraints on individual and overall temperature B factors and thus the quality of crystal structures. Some researchers consider these data to be of little value and opt to discard them during data processing, particularly at medium and low resolution, at which individual B factors of atomic models cannot be refined. Here, new evidence is provided to show that the inclusion of these data helps to improve the quality of experimental phases by imposing proper constraints on electron-density models during noncrystallographic symmetry (NCS) averaging. Using electron-density correlation coefficients as criteria, the resolution of data has successfully been extended from 3.1 to 2.5 Å resolution with redundancy-independent merging R factors from below 100% to about 310%. It is further demonstrated that phase information can be fully extracted from observed amplitudes through de novo NCS averaging. Averaging starts with uniform density inside double-shelled spherical masks and NCS matrices that are derived from bound heavy-atom clusters at the vertices of cuboctahedrally symmetric protein particles.

  4. High- and low-temperature-stable thermite composition for producing high-pressure, high-velocity gases

    DOE Patents [OSTI]

    Halcomb, Danny L.; Mohler, Jonathan H.

    1990-10-16

    A high- and low-temperature-stable thermite composition for producing high-pressure and high-velocity gases comprises an oxidizable metal, an oxidizing reagent, and a high-temperature-stable gas-producing additive selected from the group consisting of metal carbides and metal nitrides.

  5. Precision measurement of the longitudinal double-spin asymmetry for inclusive jet production in polarized proton collisions at √s = 200 GeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Adamczyk, L.

    2015-08-26

    We report a new measurement of the midrapidity inclusive jet longitudinal double-spin asymmetry, ALL, in polarized pp collisions at center-of-mass energy √s = 200 GeV. The STAR data place stringent constraints on polarized parton distribution functions extracted at next-to-leading order from global analyses of inclusive deep-inelastic scattering (DIS), semi-inclusive DIS, and RHIC pp data. Lastly, the measured asymmetries provide evidence at the 3σ level for positive gluon polarization in the Bjorken-x region x > 0.05 .

  6. Precision Measurement of the Longitudinal Double-Spin Asymmetry for Inclusive Jet Production in Polarized Proton Collisions at ?s=200GeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Adamczyk, L.

    2015-08-26

    We report a new measurement of the midrapidity inclusive jet longitudinal double-spin asymmetry, A LL , in polarized pp collisions at center-of-mass energy ?s =200 GeV . The STAR data place stringent constraints on polarized parton distribution functions extracted at next-to-leading order from global analyses of inclusive deep-inelastic scattering (DIS), semi-inclusive DIS, and RHIC pp data. The measured asymmetries provide evidence at the 3? level for positive gluon polarization in the Bjorken-x region x>0.05 .

  7. Branching Fraction and CP Asymmetry Measurements in Inclusive B ? Xs ???? and B ? Xs? Decays from BABAR

    SciTech Connect (OSTI)

    Eigen, G.

    2015-04-29

    We present an update on total and partial branching fractions and on CP asymmetries in the semi-inclusive decay B ? Xs???-. Further, we summarize our results on branching fractions and CP asymmetries for semi-inclusive and fully-inclusive B ? Xs? decays. We present the first result on the CP asymmetry diff erence of charged and neutral B ? Xs? decays yielding the first constraint on the ratio of Wilson coeffi cients Im(C8eff/C7eff).

  8. Precision measurement of the longitudinal double-spin asymmetry for inclusive jet production in polarized proton collisions at √s = 200 GeV

    SciTech Connect (OSTI)

    Adamczyk, L.

    2015-08-26

    We report a new measurement of the midrapidity inclusive jet longitudinal double-spin asymmetry, ALL, in polarized pp collisions at center-of-mass energy √s = 200 GeV. The STAR data place stringent constraints on polarized parton distribution functions extracted at next-to-leading order from global analyses of inclusive deep-inelastic scattering (DIS), semi-inclusive DIS, and RHIC pp data. Lastly, the measured asymmetries provide evidence at the 3σ level for positive gluon polarization in the Bjorken-x region x > 0.05 .

  9. Method of preparing a dimensionally stable electrode for use in a MCFC

    DOE Patents [OSTI]

    Swarr, Thomas E.; Wnuck, Wayne G.

    1987-12-22

    A method is disclosed for preparing a dimensionally stable electrode structure, particularly nickel-chromium anodes, for use in a molten carbonate fuel cell stack. A low-chromium to nickel alloy is provided and oxidized in a mildly oxidizing gas of sufficient oxidation potential to oxidize chromium in the alloy structure. Typically, a steam/H.sub.2 gas mixture in a ratio of about 100/1 and at a temperature below 800.degree. C. is used as the oxidizing medium. This method permits the use of less than 5 weight percent chromium in nickel alloy electrodes while obtaining good resistance to creep in the electrodes of a fuel cell stack.

  10. Method of preparing a dimensionally stable electrode for use in a molten carbonate fuel cell

    DOE Patents [OSTI]

    Swarr, T.E.; Wnuck, W.G.

    1986-01-29

    A method is disclosed for preparing a dimensionally stable electrode structure, particularly nickel-chromium anodes, for use in a molten carbonate fuel cell stack. A low-chromium to nickel alloy is provided and oxidized in a mildly oxidizing gas of sufficient oxidation potential to oxidize chromium in the alloy structure. Typically, a steam/H/sub 2/ gas mixture in a ratio of about 100/1 and at a temperature below 800/sup 0/C is used as the oxidizing medium. This method permits the use of less than 5 wt % chromium in nickel alloy electrodes while obtaining good resistance to creep in the electrodes of a fuel cell stack.

  11. Advanced thermally stable jet fuels. Technical progress report, October 1993--December 1993

    SciTech Connect (OSTI)

    Schobert, H.H.; Eser, S.; Song, C.; Hatcher, P.G.; Walsh, P.M.; Coleman, M.M.

    1994-01-01

    The Penn State program in advancd thermally stable coal-based jet fuels has five broad objectives: (1) development of mechanisms of degradation and solids formation; (2) quantitative measurement of growth of sub-micrometer and micrometer-sized particles suspended in fuels during thermal stressing; (3) characterization of carbonaceous deposits by various instrumental and microscopic methods; (4) elucidation of the role of additives in retarding them formation of vcarbonaceous solids; and, (5) assessment of the potential of production of high yields of cycloalkanes by direct liquefaction of coal.

  12. In the OSTI Collections: Keeping Power Grids Stable | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy, Office of Scientific and Technical Information Keeping Power Grids Stable (plus, an update on the Mars Science Laboratory "Curiosity" and its ChemCam) The Relation of Grid Stability to the "Smart Grid" Concept Update: the Mars Science Laboratory's ChemCam References Additional References Research Organizations Reports Available through OSTI's SciTech Connect Figure 1. The Continental U.S. power transmission grid consists of about 300,000 km of lines operated by

  13. Multilayer films with sharp, stable interfaces for use in EUV and soft X-ray application

    DOE Patents [OSTI]

    Barbee, Jr., Troy W.; Bajt, Sasa

    2002-01-01

    The reflectivity and thermal stability of Mo/Si (molybdenum/silicon) multilayer films, used in soft x-ray and extreme ultraviolet region, is enhanced by deposition of a thin layer of boron carbide (e.g., B.sub.4 C) between alternating layers of Mo and Si. The invention is useful for reflective coatings for soft X-ray and extreme ultraviolet optics, multilayer for masks, coatings for other wavelengths and multilayers for masks that are more thermally stable than pure Mo/Si multilayers

  14. Selective gas adsorption and unique phase transition properties in a stable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    magnesium metal-organic framework constructed from infinite metal chains | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome gas adsorption and unique phase transition properties in a stable magnesium metal-organic framework constructed from infinite metal chains Previous Next List Yangyang Liu, Ying-Pin Chen, Tian-Fu Liu, Andrey A Yakovenko, Aaron M Raiff and Hongcai Zhou, CrystEngComm 15, 9688-9693 (2013) DOI: 10.1039/C3CE41106K 143 Abstract: A 3D Magnesium

  15. Stable Metal-Organic Frameworks Containing Single-Molecule Traps for Enzyme

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Encapsulation | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Stable Metal-Organic Frameworks Containing Single-Molecule Traps for Enzyme Encapsulation Previous Next List Dawei Feng, Tian-Fu Liu, Jie Su, Mathieu Bosch, Zhangwen Wei, Wei Wan, Daqiang Yuan, Ying-Pin Chen, Xuan Wang, Kecheng Wang, Xizhen Lian, Zhi-Yuan Gu, Jihye Park, Xiaodong Zou & Hong-Cai Zhou, Nature Communications 6, 5979 (2015) DOI: 10.1038/ncomms6979 179 Abstract: Enzymatic

  16. Development of a stable dielectric-barrier discharge enhanced laminar plasma jet generated at atmospheric pressure

    SciTech Connect (OSTI)

    Tang Jie; Li Shibo; Zhao Wei; Wang Yishan [State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics of CAS, Xi'an (China); Duan Yixiang [State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics of CAS, Xi'an (China); Research Center of Analytical Instrumentation, Sichuan University, Chengdu (China)

    2012-06-18

    A stable nonthermal laminar atmospheric-pressure plasma source equipped with dielectric-barrier discharge was developed to realize more efficient plasma generation, with the total energy consumption reduced to nearly 25% of the original. Temperature and emission spectra monitoring indicates that this plasma is uniform in the lateral direction of the jet core region. It is also found that this plasma contains not only abundant excited argon atoms but also sufficient excited N{sub 2} and OH. This is mainly resulted from the escape of abundant electrons from the exit, due to the sharp decrease of sustaining voltage and the coupling between ions and electrons.

  17. Open-Shell Singlet Character of Stable Derivatives of Nonacene, Hexacene and Teranthene

    SciTech Connect (OSTI)

    Gao, Xingfa; Jiang, Deen; Zhang, Prof. Shengbai; Chen, Zhongfang; Miller, Glen; Hodgson, Jennifer

    2011-01-01

    The electronic ground states of the recently synthesized stable nonacene derivatives (J. Am. Chem. Soc.2010, 132, 1261) are open-shell singlets with a polyradical nature instead of closed-shell singlets as originally assumed, according to the unrestricted broken spin-symmetry density functional theory (UBS-DFT) computations (at B3LYP/6-31G*). It is the bulky protecting groups, not the transfer from the open-shell singlet to closed-shell singlet ground state, that stabilizes these longest characterized acenes. Similar analyses also confirmed the open-shell singlet character of the hexacene and teranthene derivatives.

  18. Measurement of the Inclusive Jet Cross Section in pp Collisions at √s=7 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chatrchyan, S.; Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Bergauer, T.; Dragicevic, M.; Erö, J.; Fabjan, C.; Friedl, M.; et al

    2011-09-19

    The inclusive jet cross section is measured in pp collisions with a center-of-mass energy of 7 TeV at the Large Hadron Collider using the CMS experiment. The data sample corresponds to an integrated luminosity of 34 pb⁻¹. The measurement is made for jet transverse momenta in the range 18–1100 GeV and for absolute values of rapidity less than 3. The measured cross section extends to the highest values of jet pT ever observed and, within the experimental and theoretical uncertainties, is generally in agreement with next-to-leading-order perturbative QCD predictions.

  19. Stable, concentrated solutions of high molecular weight polyaniline and articles therefrom

    DOE Patents [OSTI]

    Mattes, Benjamin R.; Wang, Hsing-Lin

    1999-11-09

    Stable, concentrated solutions of high molecular weight polyaniline. In order to process high quality fibers and other articles possessing good mechanical properties, it is known that solution concentrations of the chosen polymer should be in the range from 15-30% (w/w). Moreover, it is desirable to use the highest molecular weight consistent with the solubility properties of the polymer. However, such solutions are inherently unstable, forming gels before processing can be achieved. The present invention describes the addition gel inhibitors (GIs) to the polymer solution, thereby permitting high concentrations (between 15% and 30% (w/w)) of high molecular weight ((M.sub.w)>120,000, and (M.sub.n)>30,000) emeraldine base (EB) polyaniline to be dissolved. Secondary amines have been used for this purpose in concentrations which are small compared to those which might otherwise be used in a cosolvent role therefor. The resulting solutions are useful for generating excellent fibers, films, coatings and other objects, since the solutions are stable for significant time periods, and the GIs are present in too small concentrations to cause polymer deterioration. It is demonstrated that the GIs found to be useful do not act as cosolvents, and that gelation times of the solutions are directly proportional to the concentration of GI. In particular, there is a preferred concentration of GI, which if exceeded causes structural and electrical conductivity degradation of resulting articles. Heating of the solutions significantly improves solubility.

  20. Stable, concentrated solutions of high molecular weight polyaniline and articles therefrom

    DOE Patents [OSTI]

    Mattes, Benjamin R.; Wang, Hsing-Lin

    2000-01-01

    Stable, concentrated solutions of high molecular weight polyaniline. In order to process high quality fibers and other articles possessing good mechanical properties, it is known that solution concentrations of the chosen polymer should be in the range from 15-30% (w/w). Moreover, it is desirable to use the highest molecular weight consistent with the solubility properties of the polymer. However, such solutions are inherently unstable, forming gels before processing can be achieved. The present invention describes the addition gel inhibitors (GIs) to the polymer solution, thereby permitting high concentrations (>15% (w/w)) of high molecular weight ((M.sub.w)>120,000, and (M.sub.n)>30,000) emeraldine base (EB) polyaniline to be dissolved. Secondary amines have been used for this purpose in concentrations which are small compared to those which might otherwise be used in a cosolvent role therefor. The resulting solutions are useful for generating excellent fibers, films, coatings and other objects, since the solutions are stable for significant time periods, and the GIs are present in too small concentrations to cause polymer deterioration. It is demonstrated that the GIs found to be useful do not act as cosolvents, and that gelation times of the solutions are directly proportional to the concentration of GI. In particular, there is a preferred concentration of GI, which if exceeded causes structural and electrical conductivity degradation of resulting articles. Heating of the solutions significantly improves solubility.

  1. Tuning calcite morphology and growth acceleration by a rational design of highly stable protein-mimetics

    SciTech Connect (OSTI)

    Chen, Chunlong; Qi, Jiahui; Tao, Jinhui; Zuckermann, Ronald; De Yoreo, James J.

    2014-09-05

    In nature, proteins play a significant role in biomineral formation. One of the ultimate goals of bioinspired materials science is to develop highly stable synthetic molecules that mimic the function of these natural proteins by controlling crystal formation. Here, we demonstrate that both the morphology and the degree of acceleration or inhibition observed during growth of calcite in the presence of peptoids can be rationally tuned by balancing the electrostatic interactions (EI) and hydrophobic interactions (HI), with HI playing the dominant role. While either strong EI or HI inhibit growth and suppress (104) face expression, correlations between peptoid-crystal binding energies and observed changes in calcite growth indicate moderate EI allow peptoids to weakly adsorb while moderate HI cause disruption of surface-adsorbed water layers, leading to growth acceleration with retained expression of (104) faces. This study provides fundamental principles for designing peptoids as crystallization promoters, and offers a straightforward screening method based on macroscopic crystal morphology. Because peptoids are sequence-specific, highly stable, and easily synthesized, peptoid-enhanced crystallization offers a broad range of potential applications.

  2. A Novel Thermal Electrochemical Synthesis Method for Production of Stable Colloids of "Naked" Metal (Ag) Nanocrystals

    SciTech Connect (OSTI)

    Hu, Michael Z.; Easterly, Clay E

    2009-01-01

    Solution synthesis of nanocrystal silver is reviewed. This paper reports a novel thermal electrochemical synthesis (TECS) for producing metal Ag nanocrystals as small as a few nanometers. The TECS method requires mild conditions (25-100oC), low voltage (1-50 V DC) on Ag electrodes, and simple water or aqueous solutions as reaction medium. Furthermore, a tubular dialysis membrane surround electrodes proves favorable to produce nanosized (<10 nm) Ag nanocrystals. Different from those nanocrystals reported in literature, our nanocrystals have several unique features: (1) small nanometer size, (2) nakedness , i.e., surfaces of metal nanocrystals are free of organic ligands or capping molecules and no need of dispersant in synthesis solutions, and (3) colloidally stable in water solutions. It was discovered that Ag nanoparticles with initially large size distribution can be homogenized into near-monodispersed system by a low power (< 15 mW) He-Ne laser exposure treatment. The combination of the TECS technique and the laser treatment could lead to a new technology that produces metal nanoparticles that are naked, stable, and uniform sized. In the presence of stabilizing agent (also as supporting electrolyte) such as polyvinyl alcohol (PVA), large yield of silver nanoparticles (<100nm) in the form of thick milky sols are produced.

  3. Oxidation Unzipping of Stable Nanographenes into Joint Spin-rich Fragments

    SciTech Connect (OSTI)

    Jiang, Deen; Wang, Lu; Gao, Xingfa; Ohtsuka, Yuhki; Zhao, Yuliang; Nagase, Shigeru

    2009-01-01

    When an all-benzenoid nanographene is linearly unzipped into oxygen-joined fragments, the oxidized benzenoid rings (aromatic sextets) selectively adopt the low-spin (DeltaS = 0) or high-spin conformation (DeltaS = 1) to yield the thermally most stable isomer. The selection of the conformation depends simply on the position of the aromatic sextets: the inner ones prefer the high-spin conformation, whereas the peripheral ones prefer the low-spin conformation. Therefore, the resulting most stable isomer has a total spin whose value equals the number of inner aromatic sextets (n(i)) along the oxidizing line. The nanographene fragments contained in this isomer have a ferromagnetic spin coupling. Due to the tautomerization between the high-spin and low-spin conformations, there also exist other possible isomers with higher energies and with spins at ground state ranging from 0 to (n(i) - 1). The rich geometrically correlated spins and the adjustable energy gaps indicate great potential of the graphene oxides in spintronic devices.

  4. Stable isotopes of authigenic minerals in variably-saturated fractured tuff

    SciTech Connect (OSTI)

    Weber, D.S.; Evans, D.D.

    1988-11-01

    Identifying stable isotope variation and mineralogical changes in fractured rock may help establish the history of climatic and geomorphological processes that might affect the isolation properties of a waste repository site. This study examines the use of the stable isotope ratios of oxygen ({sup 18}O/{sup 16}O) and carbon ({sup 13}C/{sup 12}C) in authigenic minerals as hydrogeochemical tools tracing low-temperature rock-water interaction in variably-saturated fractured stuff. Isotopic compositions of fracture-filling and rock matrix minerals in the Apache Leap tuff, near Superior, Arizona were concordant with geothermal temperatures and in equilibrium with water isotopically similar to present-day meteoric water and groundwater. Oxygen and carbon isotope ratios of fracture-filling, in unsaturated fractured tuff, displayed an isotopic gradient believed to result from near-surface isotopic enrichment due to evaporation rather than the effects of rock-water interaction. Oxygen isotope ratios of rock matrix opal samples exhibited an isotopic gradient believed to result from, leaching and reprecipitation of silica at depth. Methods and results can be used to further define primary flowpaths and the movement of water in variably-saturated fractured rock. 71 refs., 23 figs., 3 tabs.

  5. Concepts for the development of nanoscale stable precipitation-strengthened steels manufactured by conventional methods

    SciTech Connect (OSTI)

    Yablinsky, C. A.; Tippey, K. E.; Vaynman, S.; Anderoglu, O.; Fine, M. E.; Chung, Y. -W.; Speer, J. G.; Findley, K. O.; Dogan, O. N.; Jablonski, P. D.; Maloy, S. A.; Hackenberg, R. E.; Clarke, A. J.; Clarke, K. D.

    2014-11-11

    In this study, the development of oxide dispersion strengthened ferrous alloys has shown that microstructures designed for excellent irradiation resistance and thermal stability ideally contain stable nanoscale precipitates and dislocation sinks. Based upon this understanding, the microstructures of conventionally manufactured ferritic and ferritic-martensitic steels can be designed to include controlled volume fractions of fine, stable precipitates and dislocation sinks via specific alloying and processing paths. The concepts proposed here are categorized as advanced high-Cr ferritic-martensitic (AHCr-FM) and novel tailored precipitate ferritic (TPF) steels, which have the potential to improve the in-reactor performance of conventionally manufactured alloys. AHCr-FM steels have modified alloy content relative to current reactor materials (such as alloy NF616/P92) to maximize desirable precipitates and control phase stability. TPF steels are designed to incorporate nickel aluminides, in addition to microalloy carbides, in a ferritic matrix to produce fine precipitate arrays with good thermal stability. Both alloying concepts may also benefit from thermomechanical processing to establish dislocation sinks and modify phase transformation behaviors. Alloying and processing paths toward designed microstructures are discussed for both AHCr-FM and TPF material classes.

  6. Concepts for the development of nanoscale stable precipitation-strengthened steels manufactured by conventional methods

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yablinsky, C. A.; Tippey, K. E.; Vaynman, S.; Anderoglu, O.; Fine, M. E.; Chung, Y. -W.; Speer, J. G.; Findley, K. O.; Dogan, O. N.; Jablonski, P. D.; et al

    2014-11-11

    In this study, the development of oxide dispersion strengthened ferrous alloys has shown that microstructures designed for excellent irradiation resistance and thermal stability ideally contain stable nanoscale precipitates and dislocation sinks. Based upon this understanding, the microstructures of conventionally manufactured ferritic and ferritic-martensitic steels can be designed to include controlled volume fractions of fine, stable precipitates and dislocation sinks via specific alloying and processing paths. The concepts proposed here are categorized as advanced high-Cr ferritic-martensitic (AHCr-FM) and novel tailored precipitate ferritic (TPF) steels, which have the potential to improve the in-reactor performance of conventionally manufactured alloys. AHCr-FM steels have modifiedmore » alloy content relative to current reactor materials (such as alloy NF616/P92) to maximize desirable precipitates and control phase stability. TPF steels are designed to incorporate nickel aluminides, in addition to microalloy carbides, in a ferritic matrix to produce fine precipitate arrays with good thermal stability. Both alloying concepts may also benefit from thermomechanical processing to establish dislocation sinks and modify phase transformation behaviors. Alloying and processing paths toward designed microstructures are discussed for both AHCr-FM and TPF material classes.« less

  7. Thermal green protein, an extremely stable, nonaggregating fluorescent protein created by structure-guided surface engineering

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Close, Devin W.; Paul, Craig Don; Langan, Patricia S.; Wilce, Matthew C. J.; Traore, Daouda A. K.; Halfmann, Randal; Rocha, Reginaldo C.; Waldo, Geoffery S.; Payne, Riley J.; Rucker, Joseph B.; et al

    2015-05-08

    In this paper, we describe the engineering and X-ray crystal structure of Thermal Green Protein (TGP), an extremely stable, highly soluble, non-aggregating green fluorescent protein. TGP is a soluble variant of the fluorescent protein eCGP123, which despite being highly stable, has proven to be aggregation-prone. The X-ray crystal structure of eCGP123, also determined within the context of this paper, was used to carry out rational surface engineering to improve its solubility, leading to TGP. The approach involved simultaneously eliminating crystal lattice contacts while increasing the overall negative charge of the protein. Despite intentional disruption of lattice contacts and introduction ofmore » high entropy glutamate side chains, TGP crystallized readily in a number of different conditions and the X-ray crystal structure of TGP was determined to 1.9 Å resolution. The structural reasons for the enhanced stability of TGP and eCGP123 are discussed. We demonstrate the utility of using TGP as a fusion partner in various assays and significantly, in amyloid assays in which the standard fluorescent protein, EGFP, is undesirable because of aberrant oligomerization.« less

  8. Fabrication of stable, wide-bandgap thin films of Mg, Zn and O

    DOE Patents [OSTI]

    Katiyar, Ram S.; Bhattacharya, Pijush; Das, Rasmi R.

    2006-07-25

    A stable, wide-bandgap (approximately 6 eV) ZnO/MgO multilayer thin film is fabricated using pulsed-laser deposition on c-plane Al2O3 substrates. Layers of ZnO alternate with layers of MgO. The thickness of MgO is a constant of approximately 1 nm; the thicknesses of ZnO layers vary from approximately 0.75 to 2.5 nm. Abrupt structural transitions from hexagonal to cubic phase follow a decrease in the thickness of ZnO sublayers within this range. The band gap of the thin films is also influenced by the crystalline structure of multilayer stacks. Thin films with hexagonal and cubic structure have band-gap values of 3.5 and 6 eV, respectively. In the hexagonal phase, Mg content of the films is approximately 40%; in the cubic phase Mg content is approximately 60%. The thin films are stable and their structural and optical properties are unaffected by annealing at 750.degree. C.

  9. Automated data extraction from in situ protein stable isotope probing studies

    SciTech Connect (OSTI)

    Slysz, Gordon W.; Steinke, Laurey A.; Ward, David M.; Klatt, Christian G.; Clauss, Therese RW; Purvine, Samuel O.; Payne, Samuel H.; Anderson, Gordon A.; Smith, Richard D.; Lipton, Mary S.

    2014-01-27

    Protein stable isotope probing (protein-SIP) has strong potential for revealing key metabolizing taxa in complex microbial communities. While most protein-SIP work to date has been performed under controlled laboratory conditions to allow extensive isotope labeling of the target organism, a key application will be in situ studies of microbial communities under conditions that result in small degrees of partial labeling. One hurdle restricting large scale in situ protein-SIP studies is the lack of algorithms and software for automated data processing of the massive data sets resulting from such studies. In response, we developed Stable Isotope Probing Protein Extraction Resources software (SIPPER) and applied it for large scale extraction and visualization of data from short term (3 h) protein-SIP experiments performed in situ on Yellowstone phototrophic bacterial mats. Several metrics incorporated into the software allow it to support exhaustive analysis of the complex composite isotopic envelope observed as a result of low amounts of partial label incorporation. SIPPER also enables the detection of labeled molecular species without the need for any prior identification.

  10. Elastomeric Microchip Electrospray Emitter for Stable Cone-Jet Mode Operation in the Nanoflow Regime.

    SciTech Connect (OSTI)

    Kelly, Ryan T.; Tang, Keqi; Irimia, Daniel; Toner, Mehmet; Smith, Richard D.

    2008-05-15

    Despite widespread interest in applying lab-on-a-chip technologies to mass spectrometry (MS)-based analyses, the coupling of microfluidics to electrospray ionization (ESI)-MS remains challenging. We report a robust, integrated poly(dimethylsiloxane) microchip interface for ESI-MS using simple and widely accessible microfabrication procedures. The interface uses an auxiliary channel to provide electrical contact in the Taylor cone of the electrospray without sample loss or dilution. The electric field at the channel terminus is enhanced by two vertical cuts that cause the interface to taper to a line rather than to a point, and the formation of small Taylor cones at the channel exit ensures sub-nL post-column dead volumes. While comparable ESI-MS sensitivities were achieved using both microchip and conventional fused silica capillary emitters, stable cone-jet mode electrospray could be established over a far broader range of flow rates (from 501000 nL/min) and applied potentials using the microchip emitters. This special feature of the microchip emitter should minimize the fine tuning required for electrospray optimization and make the stable electrospray more resistant to external perturbations.

  11. Thermal green protein, an extremely stable, nonaggregating fluorescent protein created by structure-guided surface engineering

    SciTech Connect (OSTI)

    Close, Devin W.; Paul, Craig Don; Langan, Patricia S.; Wilce, Matthew C. J.; Traore, Daouda A. K.; Halfmann, Randal; Rocha, Reginaldo C.; Waldo, Geoffery S.; Payne, Riley J.; Rucker, Joseph B.; Prescott, Mark; Bradbury, Andrew R. M.

    2015-05-08

    In this paper, we describe the engineering and X-ray crystal structure of Thermal Green Protein (TGP), an extremely stable, highly soluble, non-aggregating green fluorescent protein. TGP is a soluble variant of the fluorescent protein eCGP123, which despite being highly stable, has proven to be aggregation-prone. The X-ray crystal structure of eCGP123, also determined within the context of this paper, was used to carry out rational surface engineering to improve its solubility, leading to TGP. The approach involved simultaneously eliminating crystal lattice contacts while increasing the overall negative charge of the protein. Despite intentional disruption of lattice contacts and introduction of high entropy glutamate side chains, TGP crystallized readily in a number of different conditions and the X-ray crystal structure of TGP was determined to 1.9 Å resolution. The structural reasons for the enhanced stability of TGP and eCGP123 are discussed. We demonstrate the utility of using TGP as a fusion partner in various assays and significantly, in amyloid assays in which the standard fluorescent protein, EGFP, is undesirable because of aberrant oligomerization.

  12. Adding Complex Terrain and Stable Atmospheric Condition Capability to the Simulator for On/Offshore Wind Farm Applications (SOWFA) (Presentation)

    SciTech Connect (OSTI)

    Churchfield, M. J.

    2013-06-01

    This presentation describes changes made to NREL's OpenFOAM-based wind plant aerodynamics solver so that it can compute the stably stratified atmospheric boundary layer and flow over terrain. Background about the flow solver, the Simulator for Off/Onshore Wind Farm Applications (SOWFA) is given, followed by details of the stable stratification/complex terrain modifications to SOWFA, along with some preliminary results calculations of a stable atmospheric boundary layer and flow over a simple set of hills.

  13. Measurement of the inclusive semileptonic branching fraction B(B⁰s→X-l+νl) at Belle

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Oswald, C.; Urquijo, P.; Dingfelder, J.; Adachi, I.; Aihara, H.; Arinstein, K.; Asner, D. M.; Aushev, T.; Bakich, A. M.; Belous, K.; et al

    2013-04-30

    We report a measurement of the inclusive semileptonic B0s branching fraction in a 121 fb⁻¹ data sample collected near the Υ(5S) resonance with the Belle detector at the KEKB asymmetric energy e⁺e⁻ collider. Events containing B⁰(*)sB¯¯¯⁰(*)s pairs are selected by reconstructing a tag side D⁺s and identifying a signal side lepton l⁺ (l=e, μ) that is required to have the same-sign charge to ensure that both originate from different B⁰s mesons. The B⁰s→X⁻l⁺νl branching fraction is extracted from the ratio of the measured yields of D⁺s mesons and D⁺sl⁺ pairs and the known production and branching fractions. The inclusive semileptonicmore » branching fraction is measured to be [10.6±0.5(stat)±0.7(syst)]%.« less

  14. Measurement of the inclusive semileptonic branching fraction B(B⁰s→X-l+νl) at Belle

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Oswald, C.; Urquijo, P.; Dingfelder, J.; Adachi, I.; Aihara, H.; Arinstein, K.; Asner, D. M.; Aushev, T.; Bakich, A. M.; Belous, K.; et al

    2013-04-30

    We report a measurement of the inclusive semileptonic B0s branching fraction in a 121 fb⁻¹ data sample collected near the Υ(5S) resonance with the Belle detector at the KEKB asymmetric energy e⁺e⁻ collider. Events containing B⁰(*)sB¯¯¯⁰(*)s pairs are selected by reconstructing a tag side D⁺s and identifying a signal side lepton l⁺ (l=e, μ) that is required to have the same-sign charge to ensure that both originate from different B⁰s mesons. The B⁰s→X⁻l⁺νl branching fraction is extracted from the ratio of the measured yields of D⁺s mesons and D⁺sl⁺ pairs and the known production and branching fractions. The inclusive semileptonicmore »branching fraction is measured to be [10.6±0.5(stat)±0.7(syst)]%.« less

  15. Stable n-CuInSe/sub 2/iodide-iodine photoelectrochemical cell

    DOE Patents [OSTI]

    Cahen, D.; Chen, Y.W.

    1984-09-20

    In a photoelectrochemical solar cell, stable output and solar efficiency in excess of 10% are achieved with a photoanode of n-CuInSe/sub 2/ electrode material and an iodine/iodide redox couple used in a liquid electrolyte. The photoanode is prepared by treating the electrode material by chemical etching, for example in Br/sub 2//MeOH; heating the etched electrode material in air or oxygen; depositing a surface film coating of indium on the electrode material after the initial heating; and thereafter again heating the electrode material in air or oxygen to oxidize the indium. The electrolyte is treated by the addition of Cu/sup +/ or Cu/sup 2 +/ salts and in In/sup 3 +/ salts.

  16. Stable N-CuInSe.sub.2 /iodide-iodine photoelectrochemical cell

    DOE Patents [OSTI]

    Cahen, David; Chen, Yih W.

    1985-01-01

    In a photoelectrochemical solar cell, stable output and solar efficiency in excess of 10% are achieved with a photoanode of n-CuInSe.sub.2 electrode material and an iodine/iodide redox couple used in a liquid electrolyte. The photoanode is prepared by treating the electrode material by chemical etching, for example in Br.sub.2 /MeOH; heating the etched electrode material in air or oxygen; depositing a surface film coating of indium on the electrode material after the initial heating; and thereafter again heating the electrode material in air or oxygen to oxidize the indium. The electrolyte is treated by the addition of Cu.sup.+ or Cu.sup.2+ salts and In.sup.3+ salts.

  17. Stable, high-efficiency amorphous silicon solar cells with low hydrogen content

    SciTech Connect (OSTI)

    Fortmann, C.M.; Hegedus, S.S. )

    1992-12-01

    Results and conclusions obtained during a research program of the investigation of amorphous silicon and amorphous silicon based alloy materials and solar cells fabricated by photo-chemical vapor and glow discharge depositions are reported. Investigation of the effects of the hydrogen content in a-si:H i-layers in amorphous silicon solar cells show that cells with lowered hydrogen content i-layers are more stable. A classical thermodynamic formulation of the Staebler-Wronski effect has been developed for standard solar cell operating temperatures and illuminations. Methods have been developed to extract a lumped equivalent circuit from the current voltage characteristic of a single junction solar cell in order to predict its behavior in a multijunction device.

  18. Structurally stable gel bead containing entrapped enzyme and method for manufacture thereof

    DOE Patents [OSTI]

    Woodward, J.

    1998-12-08

    This research provides a structurally stable gel bead containing an entrapped enzyme and a method for its manufacture. The enzyme is covalently cross-linked to gelatin in the presence of glutaraldehyde prior to the formation of the gel bead, to prevent leakage of the enzyme. Propylene glycol alginate is then added to the mixture. Once the gel beads are formed, they are then soaked in glutaraldehyde, which imparts structural stability to the gel beads. This method can be used with many types of enzymes, such as proteases, carbohydrases, proteases, ligases, isomerases, oxidoreductases, and specialty enzymes. These and other enzymes can be immobilized in the gel beads and utilized in a number of enzymatic processes. Exogenously added ions are not required to maintain the structural stability of these gel beads. 7 figs.

  19. Structurally stable gel bead containing entrapped enzyme and method for manufacture thereof

    DOE Patents [OSTI]

    Woodward, Jonathan

    1998-01-01

    A structurally stable gel bead containing an entrapped enzyme and a method for its manufacture. The enzyme is covalently cross-linked to gelatin in the presence of glutaraldehyde prior to the formation of the gel bead, to prevent leakage of the enzyme. Propylene glycol alginate is then added to the mixture. Once the gel beads are formed, they are then soaked in glutaraldehyde, which imparts structural stability to the gel beads. This method can be used with many types of enzymes, such as proteases, carbohydrases, proteases, ligases, isomerases, oxidoreductases, and specialty enzymes. These and other enzymes can be immobilized in the gel beads and utilized in a number of enzymatic processes. Exogenously added ions are not required to maintain the structural stability of these gel beads.

  20. More stable hybrid organic solar cells deposited on amorphous Si electron transfer layer

    SciTech Connect (OSTI)

    Samiee, Mehran; Modtland, Brian; Dalal, Vikram L.; Aidarkhanov, Damir

    2014-05-26

    We report on defect densities, performance, and stability of organic/inorganic hybrid solar cells produced using n-doped inorganic amorphous silicon-carbide layers as the electron transport layer (ETL). The organic material was poly-3-hexyl-thiophene (P3HT) and heterojunction was formed using phenyl-C{sub 71}-Butyric-Acid-Methyl Ester (PCBM). For comparison, inverted solar cells fabricated using Cs{sub 2}CO{sub 3} as ETL were fabricated. Defect densities and subgap quantum efficiency curves were found to be nearly identical for both types of cells. The cells were subjected to 2xsun illumination and it was found that the cells produced using doped a-Si as ETL were much more stable than the cells produced using Cs{sub 2}CO{sub 3}.

  1. Low-dimensional hyperthin FeS2 nanostructures for efficient and stable hydrogen evolution electrocatalysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jasion, Daniel; Qiao, Qiao; Barforoush, Joseph M.; Zhu, Yimei; Ren, Shenqiang; Leonard, Kevin C.

    2015-10-05

    We report a scalable, solution-processing method for synthesizing low-dimensional hyperthin FeS2 nanostructures, and we show that 2D FeS2 disc nanostructures are an efficient and stable hydrogen evolution electrocatalyst. By changing the Fe:S ratio in the precursor solution, we were able to preferentially synthesize either 1D wire or 2D disc nanostructures. The 2D FeS2 disc structure has the highest electrocatalytic activity for the hydrogen evolution reaction, comparable to platinum in neutral pH conditions. Moreover, the ability of the FeS2 nanostructures to generate hydrogen was confirmed by scanning electrochemical microscopy, and the 2D disc nanostructures were able to generate hydrogen for overmore » 125 h.« less

  2. Pt monolayer shell on nitrided alloy core — A path to highly stable oxygen reduction catalyst

    SciTech Connect (OSTI)

    Hu, Jue; Kuttiyiel, Kurian A.; Sasaki, Kotaro; Su, Dong; Yang, Tae -Hyun; Park, Gu -Gon; Zhang, Chengxu; Chen, Guangyu; Adzic, Radoslav R.

    2015-07-22

    The inadequate activity and stability of Pt as a cathode catalyst under the severe operation conditions are the critical problems facing the application of the proton exchange membrane fuel cell (PEMFC). Here we report on a novel route to synthesize highly active and stable oxygen reduction catalysts by depositing Pt monolayer on a nitrided alloy core. The prepared PtMLPdNiN/C catalyst retains 89% of the initial electrochemical surface area after 50,000 cycles between potentials 0.6 and 1.0 V. By correlating electron energy-loss spectroscopy and X-ray absorption spectroscopy analyses with electrochemical measurements, we found that the significant improvement of stability of the PtMLPdNiN/C catalyst is caused by nitrogen doping while reducing the total precious metal loading.

  3. Pt monolayer shell on nitrided alloy core — A path to highly stable oxygen reduction catalyst

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hu, Jue; Kuttiyiel, Kurian A.; Sasaki, Kotaro; Su, Dong; Yang, Tae -Hyun; Park, Gu -Gon; Zhang, Chengxu; Chen, Guangyu; Adzic, Radoslav R.

    2015-07-22

    The inadequate activity and stability of Pt as a cathode catalyst under the severe operation conditions are the critical problems facing the application of the proton exchange membrane fuel cell (PEMFC). Here we report on a novel route to synthesize highly active and stable oxygen reduction catalysts by depositing Pt monolayer on a nitrided alloy core. The prepared PtMLPdNiN/C catalyst retains 89% of the initial electrochemical surface area after 50,000 cycles between potentials 0.6 and 1.0 V. By correlating electron energy-loss spectroscopy and X-ray absorption spectroscopy analyses with electrochemical measurements, we found that the significant improvement of stability of themore » PtMLPdNiN/C catalyst is caused by nitrogen doping while reducing the total precious metal loading.« less

  4. Method of making highly porous, stable aluminum oxides doped with silicon

    DOE Patents [OSTI]

    Khosravi-Mardkhe, Maryam; Woodfield, Brian F.; Bartholomew, Calvin H.; Huang, Baiyu

    2016-03-22

    The present invention relates to a method for making high surface area and large pore volume thermally stable silica-doped alumina (aluminum oxide) catalyst support and ceramic materials. The ability of the silica-alumina to withstand high temperatures in presence or absence of water and prevent sintering allows it to maintain good activity over a long period of time in catalytic reactions. The method of preparing such materials includes adding organic silicon reagents to an organic aluminum salt such as an alkoxide in a controlled quantity as a doping agent in a solid state, solvent deficient reaction followed by calcination. Alternatively, the organic silicon compound may be added after calcination of the alumina, followed by another calcination step. This method is inexpensive and simple. The alumina catalyst support material prepared by the subject method maintains high pore volumes, pore diameters and surface areas at very high temperatures and in the presence of steam.

  5. Stable highly conductive ZnO via reduction of Zn vacancies

    SciTech Connect (OSTI)

    Look, David C.; Droubay, Timothy C.; Chambers, Scott A.

    2012-09-04

    Growth of Ga-doped ZnO by pulsed laser deposition at 200 ?C in an ambient of Ar and H2 produces a resistivity ? of ~ 1.5 x 10-4 ?-cm, stable to 500 ?C. Annealing on Zn foil reduces ? to ~ 1.2 x 10-4 ?-cm, one of the lowest values ever reported. The key is reducing the Zn-vacancy acceptor concentration NA to 5 x 1019, only 3% of the Ga-donor concentration ND of 1.6 x 1021 cm-3, with ND and NA determined from a degenerate mobility theory. The plasmonic wavelength is 1060 nm, further bridging the gap between metals and semiconductors.

  6. Valid flow combinations for stable sheath in a magnetized multiple ion species plasma

    SciTech Connect (OSTI)

    Sharma, Devendra; Kaw, Predhiman K. [Institute for Plasma Research, Bhat, Gandhinagar 382428 (India)

    2012-11-15

    Theoretical study is done of the entry criterion for the plasma flow into the electrostatic boundary layer, or sheath, forming in a magnetized multiple ion species plasma. Finding valid entry velocity combinations in a magnetized set up requires a magnetized equivalent of the generalized Bohm criterion. A magnetized generalized entry criterion is obtained with the scale length distribution in a region of validity for the stable solutions. The analysis finds that the valid entry flow velocity combinations with distinct values of individual ion species can correspond to a unique system phase velocity. Magnetization effects govern the region of validity whose boundaries collapse to the unmagnetized sheath criterion in the limit of normal incidence, independent of the strength of the magnetic field. Considerably smaller entry velocities, in comparison to the unmagnetized system sound velocity, are recovered for the species in appropriate regime of magnetization in the cases of oblique incidences.

  7. Stable knockdown of Kif5b in MDCK cells leads to epithelial–mesenchymal transition

    SciTech Connect (OSTI)

    Cui, Ju; Jin, Guoxiang; Yu, Bin; Wang, Zai; Lin, Raozhou; Huang, Jian-Dong

    2015-07-17

    Polarization of epithelial cells requires vectorial sorting and transport of polarity proteins to apical or basolateral domains. Kif5b is the mouse homologue of the human ubiquitous Kinesin Heavy Chain (uKHC). To investigate the function of Kif5b in epithelial cells, we examined the phenotypes of Kif5b-deficient MDCK cells. Stable knockdown of Kif5b in MDCK cells resulted in reduced cell proliferation rate, profound changes in cell morphology, loss of epithelial cell marker, and gain of mesenchymal marker, as well as increased cell migration, invasion, and tumorigenesis abilities. E-cadherin and NMMIIA could interact with Kif5b in polarized MDCK cells, and their expression levels were decreased in Kif5b-deficient MDCK cells. Overexpression of E-cadherin and NMMIIA in Kif5b depleted MDCK cells could decrease mesenchymal marker expression and cell migration ability. These results indicate that stable knockdown of Kif5b in MDCK cells can lead to epithelial–mesenchymal transition, which is mediated by defective E-cadherin and NMMIIA expression. - Highlights: • Knockdown of Kif5b in MDCK cells resulted in reduced cell proliferation rate. • Kif5b deficient MDCK cells underwent epithelial–mesenchymal transition. • E-cadherin and NMMIIA could interact with Kif5b in polarized MDCK cells. • Decreased E-cadherin and NMMIIA levels mediate EMT in Kif5b deficient MDCK cells. • Overexpression of E-cadherin and NMMIIA reverse the effects of Kif5b knockdown.

  8. MIXING AND TRANSPORT OF SHORT-LIVED AND STABLE ISOTOPES AND REFRACTORY GRAINS IN PROTOPLANETARY DISKS

    SciTech Connect (OSTI)

    Boss, Alan P.

    2013-08-10

    Analyses of primitive meteorites and cometary samples have shown that the solar nebula must have experienced a phase of large-scale outward transport of small refractory grains as well as homogenization of initially spatially heterogeneous short-lived isotopes. The stable oxygen isotopes, however, were able to remain spatially heterogeneous at the {approx}6% level. One promising mechanism for achieving these disparate goals is the mixing and transport associated with a marginally gravitationally unstable (MGU) disk, a likely cause of FU Orionis events in young low-mass stars. Several new sets of MGU models are presented that explore mixing and transport in disks with varied masses (0.016 to 0.13 M{sub Sun }) around stars with varied masses (0.1 to 1 M{sub Sun }) and varied initial Q stability minima (1.8 to 3.1). The results show that MGU disks are able to rapidly (within {approx}10{sup 4} yr) achieve large-scale transport and homogenization of initially spatially heterogeneous distributions of disk grains or gas. In addition, the models show that while single-shot injection heterogeneity is reduced to a relatively low level ({approx}1%), as required for early solar system chronometry, continuous injection of the sort associated with the generation of stable oxygen isotope fractionations by UV photolysis leads to a sustained, relatively high level ({approx}10%) of heterogeneity, in agreement with the oxygen isotope data. These models support the suggestion that the protosun may have experienced at least one FU Orionis-like outburst, which produced several of the signatures left behind in primitive chondrites and comets.

  9. Assessment of thermal evolution stages and oil-gas migration of carbonate source rocks of early tertiary in eastern Sichuan, China, by organic inclusion analysis

    SciTech Connect (OSTI)

    Shi Jixi; Li Benchao; Fu Jiamo

    1989-03-01

    The Jialinjiang Formation of early Tertiary in Sichuan, China, is a series of limestone and dolomite sediments deposited in a platform shoal environment. The diagenetic sequence and organic inclusions trapped in minerals of 95 samples from 20 drillings have been studied. At the late diagenetic stage, pale yellow organic inclusions consisted of liquid hydrocarbons disseminated in pore-infiltrating dolomite, and the homogeneous temperature of contemporaneous saline liquid inclusions possessing a low gas-liquid ratio was 86/degree/C. This indicates the evolution of the organic matter had gone over the oil generating threshold and oil formation had initiated. In the limestone formed at the late diagenetic stage, more brown-yellow organic inclusions were scattered and/or developed along with fissures, comprising 60-70% liquid hydrocarbons and 30-40% gaseous hydrocarbons. Contemporaneous saline liquid inclusions with gas-liquid ratios of 5-10% had homogeneous temperatures of 90/degree/-130/degree/C. These findings show that the organic material had entered a high evolution stage and oil migration had taken place on a large scale.

  10. Inclusive b-hadron production cross section with muons in pp collisions at sqrt(s) = 7 TeV

    SciTech Connect (OSTI)

    Khachatryan, Vardan; et al.

    2011-03-01

    A measurement of the b-hadron production cross section in proton-proton collisions at sqrt(s)=7 TeV is presented. The dataset, corresponding to 85 inverse nanobarns, was recorded with the CMS experiment at the LHC using a low-threshold single-muon trigger. Events are selected by the presence of a muon with transverse momentum greater than 6 GeV with respect to the beam direction and pseudorapidity less than 2.1. The transverse momentum of the muon with respect to the closest jet discriminates events containing b hadrons from background. The inclusive b-hadron production cross section is presented as a function of muon transverse momentum and pseudorapidity. The measured total cross section in the kinematic acceptance is sigma(pp to b+X to mu + X') =1.32 +/- 0.01 (stat) +/- 0.30 (syst) +/- 0.15 (lumi) microbarns.

  11. Single Spin Asymmetries of Inclusive Hadrons Produced in Electron Scattering from a Transversely Polarized 3He Target

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Allada, Kalyan; Zhao, Yongxiang; Aniol, Konrad; Annand, John; Averett, Todd; Benmokhtar, Fatiha; Bertozzi, William; Bradshaw, Peter; Bosted, Peter; Camsonne, Alexandre; et al

    2014-04-01

    We report the first measurement of target single-spin asymmetries (AN) in the inclusive hadron production reaction, e + 3He??h+X, using a transversely polarized 3 He target. The experiment was conducted at Jefferson Lab in Hall A using a 5.9-GeV electron beam. Three types of hadrons (?, K and proton) were detected in the transverse hadron momentum range 0.54 T F for pions was -0.29 FF+ and K+. Amorenegative asymmetry is observed for ?. The magnitudes of the asymmetries follow |A? |? +|K +|. The K and proton asymmetries are consistent with zero within the experimental uncertainties. The ?+ and ? asymmetries measured for the 3He target and extracted for neutrons are opposite in sign with a small increase observed as a function of pT.less

  12. Stable isotope signatures for characterising the biological stability of landfilled municipal solid waste

    SciTech Connect (OSTI)

    Wimmer, Bernhard; Hrad, Marlies; Huber-Humer, Marion; Watzinger, Andrea; Wyhlidal, Stefan; Reichenauer, Thomas G.

    2013-10-15

    Highlights: ? The isotopic signature of ?{sup 13}C-DIC of leachates is linked to the reactivity of MSW. ? Isotopic signatures of leachates depend on aerobic/anaerobic conditions in landfills. ? In situ aeration of landfills can be monitored by isotope analysis in leachate. ? The isotopic analysis of leachates can be used for assessing the stability of MSW. ? ?{sup 13}C-DIC of leachates helps to define the duration of landfill aftercare. - Abstract: Stable isotopic signatures of landfill leachates are influenced by processes within municipal solid waste (MSW) landfills mainly depending on the aerobic/anaerobic phase of the landfill. We investigated the isotopic signatures of ?{sup 13}C, ?{sup 2}H and ?{sup 18}O of different leachates from lab-scale experiments, lysimeter experiments and a landfill under in situ aeration. In the laboratory, columns filled with MSW of different age and reactivity were percolated under aerobic and anaerobic conditions. In landfill simulation reactors, waste of a 25 year old landfill was kept under aerobic and anaerobic conditions. The lysimeter facility was filled with mechanically shredded fresh waste. After starting of the methane production the waste in the lysimeter containments was aerated in situ. Leachate and gas composition were monitored continuously. In addition the seepage water of an old landfill was collected and analysed periodically before and during an in situ aeration. We found significant differences in the ?{sup 13}C-value of the dissolved inorganic carbon (?{sup 13}C-DIC) of the leachate between aerobic and anaerobic waste material. During aerobic degradation, the signature of ?{sup 13}C-DIC was mainly dependent on the isotopic composition of the organic matter in the waste, resulting in a ?{sup 13}C-DIC of ?20 to ?25. The production of methane under anaerobic conditions caused an increase in ?{sup 13}C-DIC up to values of +10 and higher depending on the actual reactivity of the MSW. During aeration of a landfill the aerobic degradation of the remaining organic matter caused a decrease to a ?{sup 13}C-DIC of about ?20. Therefore carbon isotope analysis in leachates and groundwater can be used for tracing the oxidationreduction status of MSW landfills. Our results indicate that monitoring of stable isotopic signatures of landfill leachates over a longer time period (e.g. during in situ aeration) is a powerful and cost-effective tool for characterising the biodegradability and stability of the organic matter in landfilled municipal solid waste and can be used for monitoring the progress of in situ aeration.

  13. Production of stable, non-thermal atmospheric pressure rf capacitive plasmas using gases other than helium or neon

    DOE Patents [OSTI]

    Park, Jaeyoung; Henins, Ivars

    2005-06-21

    The present invention enables the production of stable, steady state, non-thermal atmospheric pressure rf capacitive .alpha.-mode plasmas using gases other than helium and neon. In particular, the current invention generates and maintains stable, steady-state, non-thermal atmospheric pressure rf .alpha.-mode plasmas using pure argon or argon with reactive gas mixtures, pure oxygen or air. By replacing rare and expensive helium with more readily available gases, this invention makes it more economical to use atmospheric pressure rf .alpha.-mode plasmas for various materials processing applications.

  14. Facile synthesis of highly stable a-Si by ion implantation of low-keV H isotopes

    SciTech Connect (OSTI)

    Moutanabbir, O.; Scholz, R.; Goesele, U.; Terreault, B.

    2009-06-15

    It is experimentally shown that silicon is 'easily' amorphized by low-keV H ions at the relatively high temperature of 150 K and for an ion fluence equivalent to <1 DPA (displacement per atom). The a-Si layer is much more stable against recrystallization than a-Si produced by other ions and more stable against chemical modification than c-Si that is H-implanted at room temperature. These results are unexplained by the current atomic collision theory, including molecular-dynamics simulations, but they demonstrate the stabilizing effect of dangling bond passivation by H atoms in postulated, metastable, amorphous droplets.

  15. Method of forming a relatively stable slip of silicon metal particles and yttrium containing particles

    DOE Patents [OSTI]

    Dickie, Ray A.; Mangels, John A.

    1984-01-01

    The method concerns forming a relatively stable slip of silicon metal particles and yttrium containing particles. In one embodiment, a casting slip of silicon metal particles is formed in water. Particles of a yttrium containing sintering aid are added to the casting slip. The yttrium containing sintering aid is a compound which has at least some solubility in water to form Y.sup.+3 ions which have a high potential for totally flocculating the silicon metal particles into a semiporous solid. A small amount of a fluoride salt is added to the casting slip which contains the yttrium containing sintering aid. The fluoride salt is one which will produce fluoride anions when dissolved in water. The small amount of the fluoride anions produced are effective to suppress the flocculation of the silicon metal particles by the Y.sup.+3 ions so that all particles remain in suspension in the casting slip and the casting slip has both an increased shelf life and can be used to cast articles having a relatively thick cross-section. The pH of the casting slip is maintained in a range from 7.5 to 9. Preferably, the fluoride salt used is one which is based on a monovalent cation such as sodium or ammonia. The steps of adding the yttrium containing sintering aid and the fluoride salt may be interchanged if desired, and the salt may be added to a solution containing the sintering aid prior to addition of the silicon metal particles.

  16. Mechanically stable, high aspect ratio, multifilar, wound, ribbon-type conductor and method for manufacturing same

    DOE Patents [OSTI]

    Cottingham, James G.

    1987-01-01

    A mechanically stable, wound, multifilar, ribbon-type conductor having a cross-sectional aspect ratio which may be greater than 12:1, comprising a plurality of conductive strands wound to form a flattened helix containing a plastic strip into which the strands have been pressed so as to form a bond between the strip and the strands. The bond mechanically stabilizes the conductor under tension, preventing it from collapsing into a tubular configuration. In preferred embodiments the plastic strip may be polytetrafluoroethylene, and the conductive strands may be formed from a superconductive material. Conductors in accordance with the present invention may be manufactured by winding a plurality of conductive strands around a hollow mandrel; the cross-section of a hollow mandrel; the cross-section of the mandrel continuously varying from substantially circular to a high aspect ratio elipse while maintaining a constant circumference. The wound conductive strands are drawn from the mandrel as a multifilar helix while simultaneously a plastic strip is fed through the hollow mandrel so that it is contained within the helix as it is withdrawn from the mandrel. The helical conductor is then compressed into a ribbon-like form and the strands are bonded to the plastic strip by a combination of heat and pressure.

  17. Novel stable, non-complexing anions for rechargeable lithium batteries. Phase 1

    SciTech Connect (OSTI)

    Dominey, L.A.

    1987-09-05

    The project was initiated to synthesize two new lithium salts, LiN(CF3SO2)2 and LiSbF6, and to investigate the use of these salts in ambient temperature rechargeable Li/TiS2 laboratory cells. Systematic investigations were carried out on their synthesis, purification, chemical and electrochemical stability, conductivity, and cycleability in various aprotic organic solvents. Quantitative (>98%) preparation of LiN(CF3SO2)2 was achieved with ease, but recrystallization from dioxane failed to produce salt of higher purity. Nevertheless, open circuit stability tests in several organic solvents were better than those obtained with commercially available LiAsF6-based electrolyte. Conductivities of the new salts in THF, 1,3-dioxolane, and sulfolane were all sufficient to permit cycling studies. Electrochemical investigation indicated that LiN(CF3SO2)2 was stable over a wide potential range, i.e., from 4V to 0.5V vs Li at a glassy carbon working electrode. These characteristics probably contribute to high Li/TiS2 full cell cycle numbers in dioxolane and sulfolane when compared to LiAsF6 in the same solvents. Because of the reactivity of LiSbF6, no cycling studies were carried out on this salt.

  18. Thermally Stable Nanocatalyst for High Temperature Reactions: Pt-Mesoporous Silica Core-Shell Nanoparticles

    SciTech Connect (OSTI)

    Joo, Sang Hoon; Park, J.Y.; Tsung, C.-K.; Yamada, Y.; Yang, P.; Somorjai, G.A.

    2008-10-25

    Recent advances in colloidal synthesis enabled the precise control of size, shape and composition of catalytic metal nanoparticles, allowing their use as model catalysts for systematic investigations of the atomic-scale properties affecting catalytic activity and selectivity. The organic capping agents stabilizing colloidal nanoparticles, however, often limit their application in high-temperature catalytic reactions. Here we report the design of a high-temperature stable model catalytic system that consists of Pt metal core coated with a mesoporous silica shell (Pt{at}mSiO{sub 2}). While inorganic silica shells encaged the Pt cores up to 750 C in air, the mesopores directly accessible to Pt cores made the Pt{at}mSiO{sub 2} nanoparticles as catalytically active as bare Pt metal for ethylene hydrogenation and CO oxidation. The high thermal stability of Pt{at}mSiO{sub 2} nanoparticles permitted high-temperature CO oxidation studies, including ignition behavior, which was not possible for bare Pt nanoparticles because of their deformation or aggregation. The results suggest that the Pt{at}mSiO{sub 2} nanoparticles are excellent nanocatalytic systems for high-temperature catalytic reactions or surface chemical processes, and the design concept employed in the Pt{at}mSiO{sub 2} core-shell catalyst can be extended to other metal-metal oxide compositions.

  19. Large and stable emission current from synthesized carbon nanotube/fiber network

    SciTech Connect (OSTI)

    Di, Yunsong; Xiao, Mei; Zhang, Xiaobing Wang, Qilong; Li, Chen; Lei, Wei; Cui, Yunkang

    2014-02-14

    In order to obtain a large and stable electron field emission current, the carbon nanotubes have been synthesized on carbon fibers by cold wall chemical vapor deposition method. In the hierarchical nanostructures, carbon fibers are entangled together to form a conductive network, it could provide excellent electron transmission and adhesion property between electrode and emitters, dispersed clusters of carbon nanotubes with smaller diameters have been synthesized on the top of carbon fibers as field emitters, this kind of emitter distribution could alleviate electrostatic shielding effect and protect emitters from being wholly destroyed. Field emission properties of this kind of carbon nanotube/fiber network have been tested, up to 30?mA emission current at an applied electric field of 6.4?V/?m was emitted from as-prepared hierarchical nanostructures. Small current degradation at large emission current output by DC power operation indicated that carbon nanotube/fiber network could be a promising candidate for field emission electron source.

  20. Super-Stable, Highly Monodisperse Plasmonic Nanocrystals with 500 Gold Atoms: Au~500(SR)~120

    SciTech Connect (OSTI)

    Kumara, Chanaka; Zuo, Xiaobing; Ilavsky, Dr. Jan; Chapman, Karena; Cullen, David A; Dass, Amala

    2014-01-01

    Determining the composition of plasmonic nanoparticles is challenging due to a deficiency in tools capable of accurately evaluating the number of atoms. Mass spectrometry plays a significant role in determining nanoparticle composition at the atomic level. Significant progress has been made in understanding ultra-small gold nanoparticles, like Au25(SR)18 and Au38(SR)24, with a Au core diameter of 0.97 and 1.3 nm, respectively. However, progress in small plasmonic nanoparticles (2 - 5 nm) is currently challenging, due in part to limitations in synthesizing monodisperse nanoparticles. Here, we report a plasmonic nanocrystal that is highly monodisperse, with an unprecedented variation of less than 20 gold atoms. The composition of the super-stable plasmonic nanocrystals at 115 kDa was determined to contain Au500 10SR120 3. The Au~500 system, named Faraduarate-500, is the largest size to be characterized using high resolution ESI mass spectrometry. Atomic pair distribution function (PDF) data shows that the local atomic structure is consistent with a face-centered cubic (fcc) or Marks decahedral arrangement. High resolution scanning transmission electron microscopy images show that the diameter is 2.4 0.1 nm. The radius of gyration measured by small angle X-ray scattering (SAXS), is 1.05 0.05 nm, and the size and the shape of SAXS molecular envelope are in agreement with TEM and PDF measurements.

  1. Development of a stable cobalt-ruthenium Fischer-Tropsch catalyst

    SciTech Connect (OSTI)

    Abrevaya, H.

    1991-01-01

    The objective of this contract is to examine the relationship between catalytic properties and the function of cobalt Fischer-Tropsch catalysts and to apply this fundamental knowledge to the development of a stable cobalt-based catalyst with a low methane-plus-ethane selectivity for use in slurry reactors. An experimental cobalt catalyst 585R2723 was tested three times in the fixed-bed reactor. The objective of the tests was to identify suitable testing conditions for screening catalyst. The {alpha}-alumina was determined to be a suitable diluent medium for controlling the catalyst bed temperature close to the inlet temperature. With 13 g of catalyst and 155 g of diluent, the catalyst maximum temperature were within 2{degree}C from the inlet temperatures. As a result of this work, 210{degree}C and 21 atm were shown to result in low methane selectivity and were used as initial conditions in the catalyst screening test. Ethane, which along with methane is undesirable, is typically produced with low selectivity and follows the same trend as methane. Other work reported here indicated that methane selectivity increases with increasing temperature but is not excessively high at 230{degree}C. Consequently, the catalyst screening test should include an evaluation of the catalyst performance at 230{degree}C. During Run 67, the increase in temperature from 210{degree}C to 230{degree}C was initiated at 30 hours on-stream.

  2. Control of membrane permeability in air-stable droplet interface bilayers

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mruetusatorn, Prachya; Polizos, Georgios; Datskos, Panos G; Taylor, Graham; Sarles, Stephen A; Boreyko, Jonathan; Hayes, Douglas G; Collier, Pat

    2015-01-01

    Air-stable droplet interface bilayers (airDIBs) on oil-infused surfaces are versatile model membranes for synthetic biology applications, including biosensing of airborne species. However, air-DIBs are subject to evaporation, which can, over time, destabilize them and reduce their useful lifetime compared to traditional DIBs that are fully submerged in oil. Here, we show that lifetimes of air-DIBs can be extended by as much as an order of magnitude by maintaining them at a temperature just above the dew point. We find that raising the temperature from near the dew point (7 C at 38.5 % relative humidity) to room temperature results inmore » loss of water molecules of hydration from the polar head groups of the lipid bilayer membrane due to evaporation in an irreversible process that increases the overall entropy of the system. This dehydration transition affects primarily the bilayer resistance, by increasing ion permeability through the increasingly disordered polar head group region of the bilayer. Temperature and/or relative humidity are conveniently tunable parameters for controlling the stability and composition of air-DIBs membranes, while still allowing for operation in ambient environments.« less

  3. Stable-isotope probe of nano-scale mineral-fluid redox interactions

    SciTech Connect (OSTI)

    Kavner, Abby

    2014-11-26

    The project examined how stable isotopes fractionate at an aqueous/solid interface during electrochemical reduction reactions. Measurements in a wide variety of metal deposition systems including Fe, Zn, Li, Mo, and Cu, have led to observations of large isotope fractionations which strongly vary as a function of rate and temperature. For the Fe, Zn, and Li systems, our electrochemical deposition methods provide the largest single-pass fractionation factors that are observed for these systems. Based on these and other experiments and theory showing and predicting significant and rate-dependent fractionations of isotopes at reacting interfaces, we have developed a simple statistical mechanics framework that predicts the kinetic isotope effect accompanying phase transformations in condensed systems. In addition, we have begun to extend our studies of mineral-fluid redox interactions to high pressures and temperatures in the diamond anvil cell. We performed a series of experiments to determine solubilities of Cu and Ni at elevated pressure and temperature conditions relevant to ore-formation.

  4. Improved Catalysts for Heavy Oil Upgrading Based on Zeolite Y Nanoparticles Encapsulated Stable Nanoporous Host

    SciTech Connect (OSTI)

    Conrad Ingram; Mark Mitchell

    2006-09-30

    The addition of hydrothermally-aged zeolite Y precursor to an SBA-15 synthesis mixture under a mildly acidic condition resulted in the formation of mesoporous aluminosilicate catalyst, Al-SBA-15, containing strong Broensted acid sites and aluminum (Al) stabilized in a totally tetrahedral coordination. The physicochemical characteristics of the catalyst varied as a function of the synthesis conditions. The catalyst possessed surface areas ranging between 690 and 850 m{sup 2}/g, pore sizes ranging from 5.6 to 7.5 nm, and pore volumes up 1.03 cm{sup 3}, which were comparable to the parent SBA-15 synthesized under similar conditions. Two wt% Al was present in the catalyst that was obtained from the reaction mixture that contained the highest Al content. The Al remained stable in totally tetrahedral coordination after calcination at 550 C. The Al-SBA-15 mesoporous catalyst showed significant catalytic activity for cumene dealkylation, and the activity increased as the amount of zeolite precursor added to the SBA-15 mixture was increased. In preparation for the final phase of the project, the catalyst was embedded into psuedoboemite alumina (catapal B) matrix and then formed into pellets. In the final phase of the project, the pelletized catalyst will be evaluated for the conversion of heavy petroleum feedstocks to naphtha and middle distillates.

  5. IMPROVED CATALYSTS FOR HEAVY OIL UPGRADING BASED ON ZEOLITE Y NANOPARTICLES ENCAPSULATED STABLE NANOPOROUS HOST

    SciTech Connect (OSTI)

    Conrad Ingram; Mark Mitchell

    2006-06-20

    Al-SBA-15 mesoporous catalysts with strong Broensted acid sites and Al stabilized in a totally tetrahedral coordination was synthesized from the addition of hydrothermally aged zeolite Y precursor to SBA-15 synthesis mixture under mildly acidic condition of pH 5.5. The materials possessed surface areas between 690 and 850 m{sup 2}/g, pore sizes ranging from 5.6 to 7.5 nm and pore volumes up 1.03 cm{sup 3}, which were comparable to parent SBA-15 synthesized under similar conditions. Up to 2 wt. % Al was present in the most aluminated sample that was investigated, and the Al remained stable in totally tetrahedral coordination, even after calcination at 550 C. The Al-SBA-15 mesoporous catalyst showed significant catalytic activity for cumene dealkylation, and activity increased as the amount of zeolite precursor added to the SBA-15 mixture was increased. The catalyst's activity was not affected by the aging time of the precursor for up to the 24 hr aging time investigated. This method of introducing Al and maintaining it in a total tetrahedral coordination is very effective, in comparison to other direct and post synthesis alumination methods reported. The catalytic performance of the zeolite Y/SBA-15 composite materials will be compared with that of pure SBA-15. The catalysts will then be evaluated for the conversion of heavy petroleum feedstocks.

  6. Low cost stable air electrode material for high temperature solid oxide electrolyte electrochemical cells

    DOE Patents [OSTI]

    Kuo, Lewis J. H.; Singh, Prabhakar; Ruka, Roswell J.; Vasilow, Theodore R.; Bratton, Raymond J.

    1997-01-01

    A low cost, lanthanide-substituted, dimensionally and thermally stable, gas permeable, electrically conductive, porous ceramic air electrode composition of lanthanide-substituted doped lanthanum manganite is provided which is used as the cathode in high temperature, solid oxide electrolyte fuel cells and generators. The air electrode composition of this invention has a much lower fabrication cost as a result of using a lower cost lanthanide mixture, either a natural mixture or an unfinished lanthanide concentrate obtained from a natural mixture subjected to incomplete purification, as the raw material in place of part or all of the higher cost individual lanthanum. The mixed lanthanide primarily contains a mixture of at least La, Ce, Pr, and Nd, or at least La, Ce, Pr, Nd and Sm in its lanthanide content, but can also include minor amounts of other lanthanides and trace impurities. The use of lanthanides in place of some or all of the lanthanum also increases the dimensional stability of the air electrode. This low cost air electrode can be fabricated as a cathode for use in high temperature, solid oxide fuel cells and generators.

  7. Novel Fast Pyrolysis/Catalytic Technology for the Production of Stable Upgraded Liquids

    SciTech Connect (OSTI)

    Oyama, Ted; Agblevor, Foster; Battaglia, Francine; Klein, Michael

    2013-01-18

    The objective of the proposed research is the demonstration and development of a novel biomass pyrolysis technology for the production of a stable bio-oil. The approach is to carry out catalytic hydrodeoxygenation (HDO) and upgrading together with pyrolysis in a single fluidized bed reactor with a unique two-level design that permits the physical separation of the two processes. The hydrogen required for the HDO will be generated in the catalytic section by the water-gas shift reaction employing recycled CO produced from the pyrolysis reaction itself. Thus, the use of a reactive recycle stream is another innovation in this technology. The catalysts will be designed in collaboration with BASF Catalysts LLC (formerly Engelhard Corporation), a leader in the manufacture of attrition-resistant cracking catalysts. The proposed work will include reactor modeling with state-of-the-art computational fluid dynamics in a supercomputer, and advanced kinetic analysis for optimization of bio-oil production. The stability of the bio-oil will be determined by viscosity, oxygen content, and acidity determinations in real and accelerated measurements. A multi-faceted team has been assembled to handle laboratory demonstration studies and computational analysis for optimization and scaleup.

  8. A highly-active and stable hydrogen evolution catalyst based on pyrite-structured cobalt phosphosulfide

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Wen; Hu, Enyuan; Jiang, Hong; Xiang, Yingjie; Weng, Zhe; Li, Min; Fan, Qi; Yu, Xiqian; Altman, Eric I.; Wang, Hailiang

    2016-02-19

    Rational design and controlled synthesis of hybrid structures comprising multiple components with distinctive functionalities are an intriguing and challenging approach to materials development for important energy applications like electrocatalytic hydrogen production, where there is a great need for cost effective, active and durable catalyst materials to replace the precious platinum. Here we report a structure design and sequential synthesis of a highly active and stable hydrogen evolution electrocatalyst material based on pyrite-structured cobalt phosphosulfide nanoparticles grown on carbon nanotubes. The three synthetic steps in turn render electrical conductivity, catalytic activity and stability to the material. The hybrid material exhibits superiormore » activity for hydrogen evolution, achieving current densities of 10 mA cm–2 and 100 mA cm–2 at overpotentials of 48 mV and 109 mV, respectively. Lastly, phosphorus substitution is crucial for the chemical stability and catalytic durability of the material, the molecular origins of which are uncovered by X-ray absorption spectroscopy and computational simulation.« less

  9. Low cost stable air electrode material for high temperature solid oxide electrolyte electrochemical cells

    DOE Patents [OSTI]

    Kuo, L.J.H.; Singh, P.; Ruka, R.J.; Vasilow, T.R.; Bratton, R.J.

    1997-11-11

    A low cost, lanthanide-substituted, dimensionally and thermally stable, gas permeable, electrically conductive, porous ceramic air electrode composition of lanthanide-substituted doped lanthanum manganite is provided which is used as the cathode in high temperature, solid oxide electrolyte fuel cells and generators. The air electrode composition of this invention has a much lower fabrication cost as a result of using a lower cost lanthanide mixture, either a natural mixture or an unfinished lanthanide concentrate obtained from a natural mixture subjected to incomplete purification, as the raw material in place of part or all of the higher cost individual lanthanum. The mixed lanthanide primarily contains a mixture of at least La, Ce, Pr, and Nd, or at least La, Ce, Pr, Nd and Sm in its lanthanide content, but can also include minor amounts of other lanthanides and trace impurities. The use of lanthanides in place of some or all of the lanthanum also increases the dimensional stability of the air electrode. This low cost air electrode can be fabricated as a cathode for use in high temperature, solid oxide fuel cells and generators. 4 figs.

  10. Mechanical and Electrical Performance of Thermally Stable Au-ZnO films

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Schoeppner, Rachel L.; Goeke, Ronald S.; Moody, Neville R.; Bahr, David F.

    2015-03-28

    The mechanical properties, thermal stability, and electrical performance of Au–ZnO composite thin films are determined in this work. The co-deposition of ZnO with Au via physical vapor deposition leads to grain refinement over that of pure Au; the addition of 0.1 vol.% ZnO reduces the as-grown grain size by over 30%. The hardness of the as-grown films doubles with 2% ZnO, from 1.8 to 3.6 GPa as measured by nanoindentation. Films with ZnO additions greater than 0.5% show no significant grain growth after annealing at 350 °C, while pure gold and smaller additions do exhibit grain growth and subsequent mechanicalmore » softening. Films with 1% and 2% ZnO show a decrease of approximately 50% in electrical resistivity and no change in hardness after annealing. A model accounting for both changes in the interface structure between dispersed ZnO particles and the Au matrix captures the changes in mechanical and electrical resistivity. Furthermore, the addition of 1–2% ZnO co-deposited with Au provides a method to create mechanically hard and thermally stable films with a resistivity less than 80 nΩ-m. Our results complement previous studies of other alloying systems, suggesting oxide dispersion strengthened (ODS) gold shows a desirable hardness–resistivity relationship that is relatively independent of the particular ODS chemistry.« less

  11. Gold-doped graphene: A highly stable and active electrocatalysts for the oxygen reduction reaction

    SciTech Connect (OSTI)

    Stolbov, Sergey Alcntara Ortigoza, Marisol

    2015-04-21

    In addressing the growing need of renewable and sustainable energy resources, hydrogen-fuel-cells stand as one of the most promising routes to transform the current energy paradigm into one that integrally fulfills environmental sustainability. Nevertheless, accomplishing this technology at a large scale demands to surpass the efficiency and enhance the cost-effectiveness of platinum-based cathodes, which catalyze the oxygen reduction reaction (ORR). In this work, our first-principles calculations show that Au atoms incorporated into graphene di-vacancies form a highly stable and cost-effective electrocatalyst that is, at the same time, as or more (dependently of the dopant concentration) active toward ORR than the best-known Pt-based electrocatalysts. We reveal that partial passivation of defected-graphene by gold atoms reduces the reactivity of C dangling bonds and increases that of Au, thus optimizing them for catalyzing the ORR and yielding a system of high thermodynamic and electrochemical stabilities. We also demonstrate that the linear relation among the binding energies of the reaction intermediates assumed in computational high-throughput material screening does not hold, at least for this non-purely transition-metal material. We expect Au-doped graphene to finally overcome the cathode-related challenge hindering the realization of hydrogen-fuel cells as the leading means of powering transportation and portable devices.

  12. Mechanical and Electrical Performance of Thermally Stable Au-ZnO films

    SciTech Connect (OSTI)

    Schoeppner, Rachel L.; Goeke, Ronald S.; Moody, Neville R.; Bahr, David F.

    2015-03-28

    The mechanical properties, thermal stability, and electrical performance of AuZnO composite thin films are determined in this work. The co-deposition of ZnO with Au via physical vapor deposition leads to grain refinement over that of pure Au; the addition of 0.1 vol.% ZnO reduces the as-grown grain size by over 30%. The hardness of the as-grown films doubles with 2% ZnO, from 1.8 to 3.6 GPa as measured by nanoindentation. Films with ZnO additions greater than 0.5% show no significant grain growth after annealing at 350 C, while pure gold and smaller additions do exhibit grain growth and subsequent mechanical softening. Films with 1% and 2% ZnO show a decrease of approximately 50% in electrical resistivity and no change in hardness after annealing. A model accounting for both changes in the interface structure between dispersed ZnO particles and the Au matrix captures the changes in mechanical and electrical resistivity. Furthermore, the addition of 12% ZnO co-deposited with Au provides a method to create mechanically hard and thermally stable films with a resistivity less than 80 n?-m. Our results complement previous studies of other alloying systems, suggesting oxide dispersion strengthened (ODS) gold shows a desirable hardnessresistivity relationship that is relatively independent of the particular ODS chemistry.

  13. Fragmentation and systematics of the pygmy dipole resonance in the stable N=82 isotones

    SciTech Connect (OSTI)

    Savran, D.; Loeher, B.; Elvers, M.; Endres, J.; Zilges, A.; Fritzsche, M.; Pietralla, N.; Ponomarev, V. Yu.; Romig, C.; Schnorrenberger, L.; Sonnabend, K.

    2011-08-15

    The low-lying electric dipole (E1) strength in the semimagic nucleus {sup 136}Xe has been measured, which finalizes the systematic survey to investigate the so-called pygmy dipole resonance (PDR) in all stable even N=82 isotones with the method of nuclear resonance fluorescence using real photons in the entrance channel. In all cases, a fragmented resonance-like structure of E1 strength is observed in the energy region 5-8 MeV. An analysis of the fragmentation of the strength reveals that the degree of fragmentation decreases toward the proton-deficient isotones, while the total integrated strength increases, indicating a dependence of the total strength on the neutron-to-proton ratio. The experimental results are compared to microscopic calculations within the quasiparticle phonon model. The calculation includes complex configurations of up to three phonons and is able to reproduce also the fragmentation of the E1 strength, which allows us to draw conclusions on the damping of the PDR. Calculations and experimental data are in good agreement on the degree of fragmentation and also on the integrated strength if the sensitivity limit of the experiments is taken into account.

  14. Porous SiC nanowire arrays as stable photocatalyst for water splitting under UV irradiation

    SciTech Connect (OSTI)

    Liu, Hailong; She, Guangwei; Mu, Lixuan; Shi, Wensheng

    2012-03-15

    Highlights: Black-Right-Pointing-Pointer Arrays of porous SiC nanowires prepared by a facile in situ carbonizing method. Black-Right-Pointing-Pointer Utilizing the SiC nanowire arrays as photocatalysis for water splitting. Black-Right-Pointing-Pointer Excellent photocatalytic performance under the UV irradiation. Black-Right-Pointing-Pointer Very high stability of the SiC nanowire photocatalyst. -- Abstract: In this study, we report the fabrication and photocatalytic properties of the oriented arrays of SiC nanowires on the Si substrate. The SiC nanowire arrays were prepared by carbonizing the Si nanowire arrays with the graphite powder at 1250 Degree-Sign C. The as-prepared SiC nanowires are highly porous, which endows them with a high surface-to-volume ratio. Considering the large surface areas and the high stability, the porous SiC nanowire arrays were used as photocatalyst for water splitting under UV irradiation. It was found that such porous SiC structure exhibited an enhanced and extremely stable photocatalytic performance.

  15. Single spin asymmetries in charged kaon production from semi-inclusive deep inelastic scattering on a transversely polarized 3He target

    SciTech Connect (OSTI)

    Zhao, Y X; Wang, Y; Allada, K; Aniol, K; Annand, J R; Averett, T; Benmokhtar, F; Bertozzi, W; Bradshaw, P C; Bosted, P; Camsonne, A; Canan, M; Cates, G D; Chen, C; Chen, J -P; Chen, W; Chirapatpimol, K; Chudakov, E; Cisbani, E; Cornejo, J C; Cusanno, F; Dalton, M M; Deconinck, W; de Jager, C W; De Leo, R; Deng, X; Deur, A; Ding, H; Dolph, P A; Dutta, C; Dutta, D; El Fassi, L; Frullani, S; Gao, H; Garibaldi, F; Gaskell, D; Gilad, S; Gilman, R; Glamazdin, O; Golge, S; Guo, L; Hamilton, D; Hansen, O; Higinbotham, D W; Holmstrom, T; Huang, J; Huang, M; Ibrahim, H F; Iodice, M; Jiang, X; Jin, G; Jones, M K; Katich, J; Kelleher, A; Kim, W; Kolarkar, A; Korsch, W; LeRose, J J; Li, X; Li, Y; Lindgren, R; Liyanage, N; Long, E; Lu, H -J; Margaziotis, D J; Markowitz, P; Marrone, S; McNulty, D; Meziani, Z -E; Michaels, R; Moffit, B; Munoz Camacho, C; Nanda, S; Narayan, A; Nelyubin, V; Norum, B; Oh, Y; Osipenko, M; Parno, D; Peng, J -C; Phillips, S K; Posik, M; Puckett, A J; Qian, X; Qiang, Y; Rakhman, A; Ransome, R; Riordan, S; Saha, A; Sawatzky, B; Schulte, E; Shahinyan, A; Shabestari, M H; Sirca, S; Stepanyan, S; Subedi, R; Sulkosky, V; Tang, L -G; Tobias, A; Urciuoli, G M; Vilardi, I; Wang, K; Wojtsekhowski, B; Yan, X; Yao, H; Ye, Y; Ye, Z; Yuan, L; Zhan, X; Zhang, Y; Zhang, Y -W; Zhao, B; Zheng, X; Zhu, L; Zhu, X; Zong, X

    2014-11-01

    We report the first measurement of target single spin asymmetries of charged kaons produced in semi-inclusive deep inelastic scattering of electrons off a transversely polarized 3He target. Both the Collins and Sivers moments, which are related to the nucleon transversity and Sivers distributions, respectively, are extracted over the kinematic range of 0.1

  16. Single spin asymmetries in charged kaon production from semi-inclusive deep inelastic scattering on a transversely polarized 3He target

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhao, Y X; Wang, Y; Allada, K; Aniol, K; Annand, J R; Averett, T; Benmokhtar, F; Bertozzi, W; Bradshaw, P C; Bosted, P; et al

    2014-11-01

    We report the first measurement of target single spin asymmetries of charged kaons produced in semi-inclusive deep inelastic scattering of electrons off a transversely polarized 3He target. Both the Collins and Sivers moments, which are related to the nucleon transversity and Sivers distributions, respectively, are extracted over the kinematic range of 0.1

  17. Measurement and Interpretation of Moments of the Combined Hadronic Mass and Energy Spectrum in Inclusive Semileptonic B-Meson Decays

    SciTech Connect (OSTI)

    Klose, Verena; /Dresden, Tech. U.

    2011-08-12

    This thesis presents first measurements of moments of the hadronic n{sub X}{sup 2} distribution measured in inclusive semileptonic decays of B mesons to final states containing a charm quark, B {yields} X{sub c}{ell}{nu}. The variable n{sub X}{sup 2} is a combination of the invariant mass of the charmed meson m{sub X}, its energy in the B-meson rest-frame E{sub X;BRF}, and a constant {tilde {Lambda}} = 0.65 GeV, n{sub X}{sup 2} = m{sub X}{sup 2}c{sup 4}-2{tilde {Lambda}}E{sub X,BRF} + {tilde {Lambda}}{sup 2}. The moments with k = 2,4,6 are measured as proposed by theory to constrain assumptions made in the theoretical description of inclusive observables in semileptonic B-meson decays. This description uses Heavy Quark Expansion (HQE), an effective QCD combined with an Operator Product Expansion. The measurement is based on a sample of 231.6 million e{sup +}e{sup -} {yields} {Upsilon}(4S) {yields} B{bar B} events recorded with the BABAR experiment at the PEP-II e{sup +}e{sup -}-storage rings at SLAC. We reconstruct the semileptonic decay by identifying a charged lepton in events tagged by a fully reconstructed hadronic decay of the second B meson. Correction procedures are derived from Monte Carlo simulations to ensure an unbiased measurement of the moments of the n{sub X}{sup 2} distribution. All moments are measured requiring minimum lepton momenta between 0.8 GeV/c and 1.9 GeV/c in the rest frame of the B meson. Performing a simultaneous fit to the measured moments up to order k = 6 combined with other measurements of moments of the lepton-energy spectrum in decays B {yields} X{sub c}{ell}{nu} and moments of the photon-energy spectrum in decays B {yields} X{sub s}{gamma}, we determine the quark-mixing parameter |V{sub cb}|, the bottom and charm quark masses, the semileptonic branching fraction {Beta}(B {yields} X{sub c}{ell}{nu}), and four non-perturbative heavy quark parameters. Using HQE calculations in the kinetic scheme up to order 1/m{sub b}{sup 3} we find |V{sub cb}| = (41.65 {+-} 0.43 {+-} 0.40 {+-} 0.58) {center_dot} 10{sup -3} and m{sub b} = (4.570 {+-} 0.033 {+-} 0.043) GeV/c{sup 2}, where the first uncertainty refers to experimental contributions, the second to uncertainties in the HQE, and the third to theoretical uncertainties in the calculations of the semileptonic decay rate {Lambda}(B {yields} X{sub c}{ell}{nu}). All obtained results are consistent with previous determinations. The inclusion of the moments decreases the uncertainty on the HQE parameters {mu}{sub {pi}}{sup 2} and {rho}{sub D}{sup 3}. Furthermore, the theoretical treatment of higher order corrections in the HQE used for the moments has been verified with these new measurements.

  18. Development of a stable cobalt-ruthenium Fisher-Tropsch catalyst. Final report

    SciTech Connect (OSTI)

    Frame, R.R.; Gala, H.B.

    1995-02-01

    The reverse micelle catalyst preparation method has been used to prepare catalysts on four supports: magnesium oxide, carbon, alumina- titania and steamed Y zeolite. These catalysts were not as active as a reference catalyst prepared during previous contracts to Union Carbide Corp. This catalyst was supported on steamed Y zerolite support and was impregnated by a pore-filling method using a nonaqueous solvent. Additional catalysts were prepared via pore- filling impregnation of steamed Y zeolites. These catalysts had levels of cobalt two to three and a half times as high as the original Union Carbide catalyst. On a catalyst volume basis they were much more active than the previous catalyst; on an atom by atom basis the cobalt was about of the same activity, i.e., the high cobalt catalysts` cobalt atoms were not extensively covered over and deactivated by other cobalt atoms. The new, high activity, Y zerolite catalysts were not as stable as the earlier Union Carbide catalyst. However, stability enhancement of these catalysts should be possible, for instance, through adjustment of the quantity and/or type of trace metals present. A primary objective of this work was determination whether small amounts of ruthenium could enhance the activity of the cobalt F-T catalyst. The reverse micelle catalysts were not activated by ruthenium, indeed scanning transmission electronic microscopy (STEM) analysis provided some evidence that ruthenium was not present in the cobalt crystallites. Ruthenium did not seem to activate the high cobalt Y zeolite catalyst either, but additional experiments with Y zeolite-supported catalysts are required. Should ruthenium prove not to be an effective promoter under the simple catalyst activation procedure used in this work, more complex activation procedures have been reported which are claimed to enhance the cobalt/ruthenium interaction and result in activity promotion by ruthenium.

  19. Coupled Environmental Processes in the Mojave Desert and Implications for ET Covers as Stable Landforms

    SciTech Connect (OSTI)

    D. Shafer; M. Y oung; S. Zitzer; E. McDonald; T. Caldwell

    2006-01-18

    Monolayer evapotranspiration (ET) covers are the baseline method for closure of disposal sites for low-level radioactive waste (LLW), mixed LLW, and transuranic (TRU) waste at the Nevada Test Site (NTS). The regulatory timeline is typically 1,000 years for LLW and 10,000 years for TRU waste. Covers for such waste have different technical considerations than those with shorter timelines because they are subject to environmental change for longer periods of time, and because the environmental processes are often coupled. To evaluate these changes, four analog sites (approximately 30, 1,000 to 2,000, 7,000 to 12,500, and 125,000 years in age) on the NTS were analyzed to address the early post-institutional control period (the youngest site), the 1,000-year compliance period for disposal of LLW, and the 10,000-year period for TRU waste. Tests included soil texture, structure, and morphology; surface soil infiltration and hydraulic conductivity; vegetation and faunal surveys; and literature reviews. Separate measurements were made in plant undercanopy and intercanopy areas. The results showed a progressive increase in silt and clay content of surface soils with age. Changes in soil texture and structure led to a fivefold decline in saturated hydraulic conductivity in intercanopy areas, but no change in undercanopies, which were subject to bioturbation. These changes may have been responsible for the reduction in total plant cover, most dramatically in intercanopy areas, primarily because more precipitation either runs off the site or is held nearer to the surface where plant roots are less common. The results suggest that covers may evolve over longer timeframes to stable landforms that minimize the need for active maintenance.

  20. Improved Catalysts for Heavy Oil Upgrading Based on Zeolite Y Nanoparticles Encapsulated Stable Nanoporous Host

    SciTech Connect (OSTI)

    Conrad Ingram; Mark Mitchell

    2007-03-31

    The addition of hydrothermally-aged zeolite Y precursor to an SBA-15 synthesis mixture under a mildly acidic condition resulted in the formation of a mesoporous aluminosilicate catalyst, AlSBA-15. The Al-SBA-15 mesoporous catalyst contains strong Br{umlt o}nsted acid sites and aluminum (Al) stabilized in a totally tetrahedral coordination. The physicochemical characteristics of the catalyst varied as a function of the synthesis conditions. The catalyst possessed surface areas ranging between 690 and 850 m{sup 2}/g, pore sizes ranging from 5.6 to 7.5 nm, and pore volumes up 1.03 cm{sup 3}, which were comparable to the parent SBA-15 synthesized under similar conditions. Two wt % Al was present in the catalyst that was obtained from the reaction mixture that contained the highest Al content. The Al remained stable in totally tetrahedral coordination after calcination at a temperature of 550 C. The Al-SBA-15 mesoporous catalyst showed significant catalytic activity for cumene dealkylation, and the activity increased as the amount of zeolite precursor added to the SBA-15 mixture was increased. In preparation for the final phase of the project, the catalyst was embedded into a psuedoboemite alumina (catapal B) matrix and then formed into pellets. In the final phase of the project, the pelletized catalyst is being evaluated for the conversion of a heavy petroleum feedstock to naphtha and middle distillates. This phase was significantly delayed during the past six months due to a serious malfunction of the fume hoods in the Clark Atlanta University's Research Center for Science and Technology, where the project is being conducted. The fume hood system was repaired and the catalyst evaluation is now underway.

  1. Instrument for stable high temperature Seebeck coefficient and resistivity measurements under controlled oxygen partial pressure

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ihlefeld, Jon F.; Brown-Shaklee, Harlan James; Sharma, Peter Anand

    2015-04-28

    The transport properties of ceramic materials strongly depend on oxygen activity, which is tuned by changing the partial oxygen pressure (pO2) prior to and during measurement. Within, we describe an instrument for highly stable measurements of Seebeck coefficient and electrical resistivity at temperatures up to 1300 K with controlled oxygen partial pressure. An all platinum construction is used to avoid potential materials instabilities that can cause measurement drift. Two independent heaters are employed to establish a small temperature gradient for Seebeck measurements, while keeping the average temperature constant and avoiding errors associated with pO2-induced drifts in thermocouple readings. Oxygen equilibriummore » is monitored using both an O2 sensor and the transient behavior of the resistance as a proxy. A pO2 range of 10-25–100 atm can be established with appropriate gas mixtures. Seebeck measurements were calibrated against a high purity platinum wire, Pt/Pt–Rh thermocouple wire, and a Bi2Te3 Seebeck coefficient Standard Reference Material. To demonstrate the utility of this instrument for oxide materials we present measurements as a function of pO2 on a 1 % Nb-doped SrTiO3 single crystal, and show systematic changes in properties consistent with oxygen vacancy defect chemistry. Thus, an approximately 11% increase in power factor over a pO2 range of 10-19–10-8 atm at 973 K for the donor-doped single crystals is observed.« less

  2. Instrument for stable high temperature Seebeck coefficient and resistivity measurements under controlled oxygen partial pressure

    SciTech Connect (OSTI)

    Ihlefeld, Jon F.; Brown-Shaklee, Harlan James; Sharma, Peter Anand

    2015-04-28

    The transport properties of ceramic materials strongly depend on oxygen activity, which is tuned by changing the partial oxygen pressure (pO2) prior to and during measurement. Within, we describe an instrument for highly stable measurements of Seebeck coefficient and electrical resistivity at temperatures up to 1300 K with controlled oxygen partial pressure. An all platinum construction is used to avoid potential materials instabilities that can cause measurement drift. Two independent heaters are employed to establish a small temperature gradient for Seebeck measurements, while keeping the average temperature constant and avoiding errors associated with pO2-induced drifts in thermocouple readings. Oxygen equilibrium is monitored using both an O2 sensor and the transient behavior of the resistance as a proxy. A pO2 range of 10-25–100 atm can be established with appropriate gas mixtures. Seebeck measurements were calibrated against a high purity platinum wire, Pt/Pt–Rh thermocouple wire, and a Bi2Te3 Seebeck coefficient Standard Reference Material. To demonstrate the utility of this instrument for oxide materials we present measurements as a function of pO2 on a 1 % Nb-doped SrTiO3 single crystal, and show systematic changes in properties consistent with oxygen vacancy defect chemistry. Thus, an approximately 11% increase in power factor over a pO2 range of 10-19–10-8 atm at 973 K for the donor-doped single crystals is observed.

  3. Advanced thermally stable jet fuels. Technical progress report, July 1993--September 1993

    SciTech Connect (OSTI)

    Schobert, H.H.; Eser, S.; Song, C.; Hatcher, P.G.; Walsh, P.M.; Coleman, M.M.

    1993-12-01

    The Penn State program in advanced thermally stable coal-based jet fuels has five broad objectives: (1) development of mechanisms of degradation and solids formation; (2) quantitative measurement of growth of sub-micrometer and micrometer-sized particles suspended in fuels during thermal stressing; (3) characterization of carbonaceous deposits by various instrumental and microscopic methods; (4) elucidation of the role of additives in retarding the formation of carbonaceous solids; (5) assessment of the potential of production of high yields of cycloalkanes by direct liquefaction of coal. An exploratory study was conducted to investigate the pyrolysis of n-butylbenzene in a flow reactor at atmospheric pressure. A number of similarities to trends previously observed in high-pressure static reactions were identified. The product distribution from pyrolysis of n-tetradecane at 400{degrees}C and 425{degrees}C was investigated. The critical temperatures of a suite of petroleum- and coal-derived jet fuels were measured by a rapidly heating sealed tube method. Work has continued on refining the measurements of deposit growth for stressing mixtures of coal-derived JP-8C with tetradecane. Current work has given emphasis to the initial stages of fuel decomposition and the onset of deposition. Pretreatment of JPTS fuel with PX-21 activated carbon (50 mg of PX-21 in 15 mL JPTS) delayed degradation and prevented carbon deposition during thermal stressing at 425{degrees}C for 5 h in nitrogen and air atmospheres. Clear indications of initial and subsequent deposit formation on different metal surfaces have been identified for thermal stressing of dodecane. Seven additives were tested for their ability to retard decomposition of dodecane at 450{degrees}C under nitrogen. Nuclear magnetic resonance data for Dammar resin indicates that structures proposed in the literature are not entirely correct.

  4. Stable water isotope simulation by current land-surface schemes:Results of IPILPS phase 1

    SciTech Connect (OSTI)

    Henderson-Sellers, A.; Fischer, M.; Aleinov, I.; McGuffie, K.; Riley, W.J.; Schmidt, G.A.; Sturm, K.; Yoshimura, K.; Irannejad, P.

    2005-10-31

    Phase 1 of isotopes in the Project for Intercomparison of Land-surface Parameterization Schemes (iPILPS) compares the simulation of two stable water isotopologues ({sup 1}H{sub 2} {sup 18}O and {sup 1}H{sup 2}H{sup 16}O) at the land-atmosphere interface. The simulations are off-line, with forcing from an isotopically enabled regional model for three locations selected to offer contrasting climates and ecotypes: an evergreen tropical forest, a sclerophyll eucalypt forest and a mixed deciduous wood. Here we report on the experimental framework, the quality control undertaken on the simulation results and the method of intercomparisons employed. The small number of available isotopically-enabled land-surface schemes (ILSSs) limits the drawing of strong conclusions but, despite this, there is shown to be benefit in undertaking this type of isotopic intercomparison. Although validation of isotopic simulations at the land surface must await more, and much more complete, observational campaigns, we find that the empirically-based Craig-Gordon parameterization (of isotopic fractionation during evaporation) gives adequately realistic isotopic simulations when incorporated in a wide range of land-surface codes. By introducing two new tools for understanding isotopic variability from the land surface, the Isotope Transfer Function and the iPILPS plot, we show that different hydrological parameterizations cause very different isotopic responses. We show that ILSS-simulated isotopic equilibrium is independent of the total water and energy budget (with respect to both equilibration time and state), but interestingly the partitioning of available energy and water is a function of the models' complexity.

  5. Confined partial filament eruption and its reformation within a stable magnetic flux rope

    SciTech Connect (OSTI)

    Joshi, Navin Chandra; Kayshap, Pradeep; Uddin, Wahab; Srivastava, Abhishek K.; Dwivedi, B. N.; Filippov, Boris; Chandra, Ramesh; Choudhary, Debi Prasad E-mail: njoshi98@gmail.com

    2014-05-20

    We present observations of a confined partial eruption of a filament on 2012 August 4, which restores its initial shape within ?2 hr after eruption. From the Global Oscillation Network Group H? observations, we find that the filament plasma turns into dynamic motion at around 11:20 UT from the middle part of the filament toward the northwest direction with an average speed of ?105 km s{sup 1}. A little brightening underneath the filament possibly shows the signature of low-altitude reconnection below the filament eruptive part. In Solar Dynamics Observatory/Atmospheric Imaging Assembly 171 images, we observe an activation of right-handed helically twisted magnetic flux rope that contains the filament material and confines it during its dynamical motion. The motion of cool filament plasma stops after traveling a distance of ?215 Mm toward the northwest from the point of eruption. The plasma moves partly toward the right foot point of the flux rope, while most of the plasma returns after 12:20 UT toward the left foot point with an average speed of ?60 km s{sup 1} to reform the filament within the same stable magnetic structure. On the basis of the filament internal fine structure and its position relative to the photospheric magnetic fields, we find filament chirality to be sinistral, while the activated enveloping flux rope shows a clear right-handed twist. Thus, this dynamic event is an apparent example of one-to-one correspondence between the filament chirality (sinistral) and the enveloping flux rope helicity (positive). From the coronal magnetic field decay index, n, calculation near the flux rope axis, it is evident that the whole filament axis lies within the domain of stability (i.e., n < 1), which provides the filament stability despite strong disturbances at its eastern foot point.

  6. Synthesis and characterization of thermally stable large-pore mesoporous nanocrystallineanatase

    SciTech Connect (OSTI)

    Ermokhina, Natalia I.; Nevinskiy, Vitaly A.; Manorik, Piotr A.; Ilyin, Vladimir G.; Novichenko, Viktor N.; Shcherbatiuk, Mykola M.; Klymchuk, Dmitro O.; Tsyba, Mykola M.; Puziy, Alexander M.

    2013-04-15

    Thermally stable mesoporous nanocrystalline TiO{sub 2} with a pure anatase structure was obtained by solgel synthesis (in combination with hydrothermal treatment) using titanium tetrabutoxide and dibenzo-18-crown-6 as a structure-directing agent in presence of surfactant and/or La{sup 3+} ions additives. Nanocrystalline TiO{sub 2} demonstrates various textures with a well-defined spherical morphology (micro- and nanospheres), a crystallite size of no greater than 10 nm (XRD), and a narrow pore size distribution. Spherical particles of micrometer scale in the presence of La{sup 3+} ions do not form. TiO{sub 2} calcined (at 500 C) after hydrothermal treatment (at 175 C) has a significantly more developed porous structure as compared with TiO{sub 2} which was not treated hydrothermally. For example, specific surface area amounts 137 m{sup 2} g{sup ?1} and 69 m{sup 2} g{sup ?1}, pore volume 0.98 cm{sup 3} g{sup ?1} and 0.21 cm{sup 3} g{sup ?1}, pore diameter 17.5 nm and 12.5 nm respectively for samples hydrothermally treated and not treated. - Graphical abstract: Large-pore mesoporous nanocristalline anatase. Highlights: ? Large-pore mesoporous nanocrystalline TiO{sub 2} was obtained by solgel synthesis. ? Crown ether was used as template in presence of surfactant and/or La{sup 3+} ions. ? Anatase (crystalline size<11 nm) is the only crystalline phase present in TiO{sub 2}. ? TiO{sub 2} shows well-defined homogeneous spherical morphology (micro- and nano-spheres)

  7. Single spin asymmetries of inclusive hadrons produced in electron scattering from a transversely polarized 3 He target

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Allada, K.; Zhao, Y. X.; Aniol, K.; Annand, J. R. M.; Averett, T.; Benmokhtar, F.; Bertozzi, W.; Bradshaw, P. C.; Bosted, P.; Camsonne, A.; et al

    2014-04-07

    We report the first measurement of target single-spin asymmetries (AN) in the inclusive hadron production reaction, e + 3He↑→h+X, using a transversely polarized 3 He target. This experiment was conducted at Jefferson Lab in Hall A using a 5.9-GeV electron beam. Three types of hadrons (π±, K± and proton) were detected in the transverse hadron momentum range 0.54 < pT < 0.74 GeV/c. The range of xF for pions was -0.29 < xF< -0.23 and for kaons -0.25 < xF<-0.18. The observed asymmetry strongly depends on the type of hadron. A positive asymmetry is observed for π+ and K+. Amore » negative asymmetry is observed for π–. The magnitudes of the asymmetries follow |Aπ –|<|Aπ +|<|AK +|. The K– and proton asymmetries are consistent with zero within the experimental uncertainties. The π+ and π– asymmetries measured for the 3He target and extracted for neutrons are opposite in sign with a small increase observed as a function of pT.« less

  8. Measurements of inclusive W and Z cross sections in pp collisions at sqrt(s)=7 TeV

    SciTech Connect (OSTI)

    Khachatryan, V.; et al.,

    2011-01-01

    Measurements of inclusive W and Z boson production cross sections in pp collisions at sqrt(s)=7 TeV are presented, based on 2.9 inverse picobarns of data recorded by the CMS detector at the LHC. The measurements, performed in the electron and muon decay channels, are combined to give sigma(pp to WX) times B(W to muon or electron + neutrino) = 9.95 \\pm 0.07(stat.) \\pm 0.28(syst.) \\pm 1.09(lumi.) nb and sigma(pp to ZX) times B(Z to oppositely charged muon or electron pairs) = 0.931 \\pm 0.026(stat.) \\pm 0.023(syst.) \\pm 0.102(lumi.) nb. Theoretical predictions, calculated at the next-to-next-to-leading order in QCD using recent parton distribution functions, are in agreement with the measured cross sections. Ratios of cross sections, which incur an experimental systematic uncertainty of less than 4%, are also reported.

  9. Measurement of the parity-violating asymmetry in inclusive electroproduction of π- near the Delta0 resonance

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Androic, D.; Armstrong, D. S.; Bailey, S. L.; Beck, D. H.; Beise, E. J.; Benesch, J.; Benmokhtar, F.; Bimbot, L.; Birchall, J.; Bosted, P.; et al

    2012-03-20

    The parity-violating (PV) asymmetry of inclusive π- production in electron scattering from a liquid deuterium target was measured at backward angles. The measurement was conducted as a part of the G0 experiment, at a beam energy of 360 MeV. The physics process dominating pion production for these kinematics is quasi-free photoproduction off the neutron via the Δ0 resonance. In the context of heavy-baryon chiral perturbation theory (HBχPT), this asymmetry is related to a low energy constant dΔ- that characterizes the parity-violating γNΔ coupling. Zhu et al. calculated dΔ- in a model benchmarked by the large asymmetries seen in hyperon weakmore » radiative decays, and predicted potentially large asymmetries for this process, ranging from Aγ- = -5.2 to +5.2 ppm. The measurement performed in this work leads to Aγ- = -0.36 ± 1.06 ± 0.37 ± 0.03 ppm (where sources of statistical, systematic and theoretical uncertainties are included), which would disfavor enchancements considered by Zhu et al. proportional to Vud/Vus. The measurement is part of a program of inelastic scattering measurements that were conducted by the G0 experiment, seeking to determine the N-Δ axial transition form-factors using PV electron scattering.« less

  10. Jet mass and substructure of inclusive jets in root s=7 TeV pp collisions with the ATLAS experiment

    SciTech Connect (OSTI)

    Aad G.; Abbott, B.; Abdallah, J.; Khalek, S. Abdel; Abdelalim, A. A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Acerbi, E.; Acharya, B. S.; Adamezyk, L.; Adams, D. L.; Addy, T. N.; Adelman, J.; Aderholz, M.; et al.

    2012-05-01

    Recent studies have highlighted the potential of jet substructure techniques to identify the hadronic decays of boosted heavy particles. These studies all rely upon the assumption that the internal substructure of jets generated by QCD radiation is well understood. In this article, this assumption is tested on an inclusive sample of jets recorded with the ATLAS detector in 2010, which corresponds to 35 pb{sup -1} of pp collisions delivered by the LHC at {radical}s = 7 TeV. In a subsample of events with single pp collisions, measurements corrected for detector efficiency and resolution are presented with full systematic uncertainties. Jet invariant mass, k{sub t} splitting scales and N-subjettiness variables are presented for anti-k{sub t} R = 1.0 jets and Cambridge-Aachen R = 1.2 jets. Jet invariant-mass spectra for Cambridge-Aachen R = 1.2 jets after a splitting and filtering procedure are also presented. Leading-order parton-shower Monte Carlo predictions for these variables are found to be broadly in agreement with data. The dependence of mean jet mass on additional pp interactions is also explored.

  11. On the Inclusion of Energy-Shifting Demand Response in Production Cost Models: Methodology and a Case Study

    SciTech Connect (OSTI)

    O'Connell, Niamh; Hale, Elaine; Doebber, Ian; Jorgenson, Jennie

    2015-07-20

    In the context of future power system requirements for additional flexibility, demand response (DR) is an attractive potential resource. Its proponents widely laud its prospective benefits, which include enabling higher penetrations of variable renewable generation at lower cost than alternative storage technologies, and improving economic efficiency. In practice, DR from the commercial and residential sectors is largely an emerging, not a mature, resource, and its actual costs and benefits need to be studied to determine promising combinations of physical DR resource, enabling controls and communications, power system characteristics, regulatory environments, market structures, and business models. The work described in this report focuses on the enablement of such analysis from the production cost modeling perspective. In particular, we contribute a bottom-up methodology for modeling load-shifting DR in production cost models. The resulting model is sufficiently detailed to reflect the physical characteristics and constraints of the underlying flexible load, and includes the possibility of capturing diurnal and seasonal variations in the resource. Nonetheless, the model is of low complexity and thus suitable for inclusion in conventional unit commitment and market clearing algorithms. The ability to simulate DR as an operational resource on a power system over a year facilitates an assessment of its time-varying value to the power system.

  12. Inclusion property of Cs, Sr, and Ba impurities in LiCl crystal formed by layer-melt crystallization

    SciTech Connect (OSTI)

    Choi, Jung-Hoon; Cho, Yung-Zun; Lee, Tae-Kyo; Eun, Hee-Chul; Kim, Jun-Hong; Park, Hwan-Seo; Kim, In-Tae; Park, Geun-Il

    2013-07-01

    Pyroprocessing is one of the promising technologies enabling the recycling of spent nuclear fuels from a commercial light water reactor (LWR). In general, pyroprocessing uses dry molten salts as electrolytes. In particular, LiCl waste salt after pyroprocessing contains highly radioactive I/II group fission products mainly composed of Cs, Sr, and Ba impurities. Therefore, it is beneficial to reuse LiCl salt in the pyroprocessing as an electrolyte for economic and environmental issues. Herein, to understand the inclusion property of impurities within LiCl crystal, the physical properties such as lattice parameter change, bulk modulus, and substitution enthalpy of a LiCl crystal having 0-6 at% Cs{sup +} or Ba{sup 2+} impurities under existence of 1 at% Sr{sup 2+} impurity were calculated via the first-principles density functional theory. The substitution enthalpy of LiCl crystals having 1 at% Sr{sup 2+} showed slightly decreased value than those without Sr{sup 2+} impurity. Therefore, through the substitution enthalpy calculation, it is expected that impurities will be incorporated within LiCl crystal as co-existed form rather than as a single component form. (authors)

  13. Air stable n-doping of WSe{sub 2} by silicon nitride thin films with tunable fixed charge density

    SciTech Connect (OSTI)

    Chen, Kevin; Kiriya, Daisuke; Hettick, Mark; Tosun, Mahmut; Ha, Tae-Jun; Madhvapathy, Surabhi Rao; Desai, Sujay; Sachid, Angada; Javey, Ali

    2014-09-01

    Stable n-doping of WSe{sub 2} using thin films of SiN{sub x} deposited on the surface via plasma-enhanced chemical vapor deposition is presented. Positive fixed charge centers inside SiN{sub x} act to dope WSe{sub 2} thin flakes n-type via field-induced effect. The electron concentration in WSe{sub 2} can be well controlled up to the degenerate limit by simply adjusting the stoichiometry of the SiN{sub x} through deposition process parameters. For the high doping limit, the Schottky barrier width at the metal/WSe{sub 2} junction is significantly thinned, allowing for efficient electron injection via tunneling. Using this doping scheme, we demonstrate air-stable WSe{sub 2} n-MOSFETs with a mobility of ?70 cm{sup 2}/V?s.

  14. High magnetic shear gain in a liquid sodium stable couette flow experiment A prelude to an alpha - omega dynamo

    SciTech Connect (OSTI)

    Colgate, Stirling [Los Alamos National Laboratory; Li, Jui [Los Alamos National Laboratory; Finn, John [Los Alamos National Laboratory; Pariev, Vladimir [Los Alamos National Laboratory; Beckley, Howard [NM INSTIT. OF MINING AND TECH; Si, Jiahe [NM INSTIT. OF MINING AND TECH.; Martinic, Joe [NM INSTIT. OF MINING AND TECH.; Westpfahl, David [NM INSTIT. OF TECH.; Slutz, James [NM INSTIT. OF MINING AND TECH.; Westrom, Zeb [NM INSTIT. OF TECH.; Klein, Brianna [NM INSTIT. OF MINING AND TECH.

    2010-11-08

    The {Omega}-phase of the liquid sodium {alpha}-{Omega} dynamo experiment at NMIMT in cooperation with LANL has successfully demonstrated the production of a high toroidal field, B{sub {phi}} {approx_equal} 8 x B{sub r} from the radial component of an applied poloidal magnetic field, B{sub r}. This enhanced toroidal field is produced by rotational shear in stable Couette Row within liquid sodium at Rm {approx_equal} 120. The small turbulence in stable Taylor-Couette Row is caused by Ekman Row where ({delta}v/v){sup 2} {approx} 10{sup -3}. This high {Omega}-gain in low turbulence flow contrasts with a smaller {Omega}-gain in higher turbulence, Helmholtz-unstable shear flows. This result supports the ansatz that large scale astrophysical magnetic fields are created within semi-coherent large scale motions in which turbulence plays a diffusive role that enables magnetic flux linkage.

  15. High stable suspension of magnetite nanoparticles in ethanol by using sono-synthesized nanomagnetite in polyol medium

    SciTech Connect (OSTI)

    Bastami, Tahereh Rohani; Entezari, Mohammad H.

    2013-09-01

    Graphical abstract: - Highlights: • The sonochemical synthesis of magnetite nanoparticles was carried out in EG without any surfactant. • The nanoparticles with sizes ∼24 nm were composed of small building blocks with sizes ∼2 nm. • The hydrophilic magnetite nanoparticles were stable in ethanol even after 8 months. • Ultrasonic intensity showed a crucial role on the obtained high stable magnetite nanoparticles in ethanol. - Abstract: The sonochemical synthesis of magnetite nanoparticles was carried out at relatively low temperature (80 °C) in ethylene glycol (EG) as a polyol solvent. The particle size was determined by transmission electron microscopy (TEM). The magnetite nanoparticles with an average size of 24 nm were composed of small building blocks with an average size of 2–3 nm and the particles exhibited nearly spherical shape. The surface characterization was investigated by using Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The stability of magnetite nanoparticles was studied in ethanol as a polar solvent. The nanoparticles showed an enhanced stability in ethanol which is due to the hydrophilic surface of the particles. The colloidal stability of magnetite nanoparticles in ethanol was monitored by UV–visible spectrophotometer. According to the results, the nanoparticles synthesized in 30 min of sonication with intensity of 35 W/cm{sup 2} (50%) led to a maximum stability in ethanol as a polar solvent with respect to the other applied intensities. The obtained magnetite nanoparticles were stable for more than12 months.

  16. Stable isotopic investigations of in-situ bioremediation of chlorinated organic solvents. 1998 annual progress report

    SciTech Connect (OSTI)

    Sturchio, N.C.

    1998-06-01

    'Contamination of soils and groundwaters with chlorinated aliphatic hydrocarbons (CAHs) is one of the most serious environmental problems in the DOE system and in the nation at large. These compounds are designated as priority pollutants by the US Environmental Protection Agency (EPA) and are known or suspected to be carcinogenic or mutagenic in humans. These compounds are readily transported by groundwater and are not reduced to acceptable concentrations for human consumption by most municipal water supply treatments; thus the compounds represent a significant hazard to a large portion of the human population. In situ bioremediation is an emerging technology that shows great promise for mitigation of CAH contamination at many sites. One of the most severe limitations of in-situ bioremediation is the difficulty of proving when it is working at a given site. The concentrations of CAHs and their degradation products in plumes may be difficult to relate to the efficiency of the remediation process because of dilution effects, but this problem is mitigated to a large extent by measuring isotope ratios. If there is a significant isotopic fractionation between CAHs and derivative chlorine-bearing products, then the fraction of CAH that is dechlorinated can be inferred from the {sup 37}Cl/{sup 35}Cl and {sup 13}C/{sup 12}C isotope ratios of the residual CAH. It is important to point out that there is currently no published information available on the magnitude of chlorine and carbon isotopic fractionation associated with biological degradation of CAHs. The authors plan to help eliminate this important gap in the knowledge with the work being performed here. This work is relevant to EMSP goals because it will provide a new and cost-effective means of evaluating and monitoring the effectiveness of in-situ bioremediation. It will employ newly developed techniques to characterize isotopic fractionation (of chlorine and carbon) associated with biotic and abiotic degradation of CAHs in laboratory microcosms. These techniques and the data acquired by using them in laboratory studies will form the fundamental basis for quantitative assessment of the mechanisms, rates, and efficiencies of various in-situ bioremediation schemes for CAHs. This report summarizes work as of 21 months into a 36-month project. First, the author has developed methods for precise measurement of stable carbon and chlorine isotope ratios of micromolar amounts of CAHs. He has also developed methods for quantitative extraction of CAHs from water and air. He has applied these methods in laboratory experiments, to investigate isotopic fractionation caused by microbial degradation and by abiotic processes such as evaporation and chemical reduction. He has also applied these methods to field investigations of contaminated groundwater aquifers at the Paducah Gaseous Diffusion Plant, Kentucky and at several manufacturing plants in the Chicago and Kansas City metropolitan areas. Results of much of this work have already been incorporated into four manuscripts that have been published, accepted for publication, or are in review.'

  17. Calcite Fluid Inclusion, Paragenetic, and Oxygen Isotopic Records of Thermal Event(s) at Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    B. Peterman; R. Moscati

    2000-08-10

    Yucca Mountain, Nevada, is under consideration as a potential high-level radioactive waste repository situated above the water table in 12.7 Ma tuffs. A wealth of textural and geochemical evidence from low-temperature deposits of calcite and silica, indicates that their genesis is related to unsaturated zone (UZ) percolation and that the level of the potential repository has never been saturated. Nonetheless, some scientists contend that thermal waters have periodically risen to the surface depositing calcite and opal in the tuffs and at the surface. This hypothesis received some support in 1996 when two-phase fluid inclusions (FIs) with homogenization temperatures (Th) between 35 and 75 C were reported from UZ calcite. Calcite deposition likely followed closely on the cooling of the tuffs and continues into the present. The paragenetic sequence of calcite and silica in the UZ is early stage calcite followed by chalcedony and quartz, then calcite with local opal during middle and late stages. Four types of FIs are found in calcite assemblages: (1) all-liquid (L); (2) all-vapor (V); (3) 2-phase with large and variable V:L ratios; and (4) a few 2-phase with small and consistent V:L ratios. Late calcite contains no FI assemblages indicating elevated depositional temperatures. In early calcite, the Th of type 4 FIs ranges from {approx} 40 to {approx} 85 C. Such temperatures (sub-boiling) and the assemblage of FIs are consistent with deposition in the UZ. Some delta 18O values < 10 permil in early calcite support such temperatures. Type 4 FIs, however, seem to be restricted to the early calcite stage, during which either cooling of the tuffs or regional volcanism were possible heat sources. Nonetheless, at present there is no compelling evidence of upwelling water as a source for the calcite/opal deposits.

  18. Color-singlet relativistic correction to inclusive J/{psi} production associated with light hadrons at B factories

    SciTech Connect (OSTI)

    Jia, Yu

    2010-08-01

    We study the first-order relativistic correction to the associated production of J/{psi} with light hadrons at B factory experiments at {radical}(s)=10.58 GeV, in the context of nonrelativistic QCD (NRQCD) factorization. We employ a strategy for NRQCD expansion that slightly deviates from the orthodox doctrine, in that the matching coefficients are not truly of a ''short-distance'' nature, but explicitly depend upon physical kinematic variables rather than partonic ones. Our matching method, with validity guaranteed by the Gremm-Kapustin relation, is particularly suited for the inclusive quarkonium production and decay processes with involved kinematics, exemplified by the process e{sup +}e{sup -}{yields}J/{psi}+gg considered in this work. Despite some intrinsic ambiguity affiliated with the order-v{sup 2} NRQCD matrix element, if we choose its value as what has been extracted from a recent Cornell-potential-model-based analysis, including the relative order-v{sup 2} effect is found to increase the lowest-order prediction for the integrated J/{psi} cross section by about 30%, and exert a modest impact on J/{psi} energy, angular and polarization distributions except near the very upper end of the J/{psi} energy. The order-v{sup 2} contribution to the energy spectrum becomes logarithmically divergent at the maximum of J/{psi} energy. A consistent analysis may require that these large end-point logarithms be resummed to all orders in {alpha}{sub s}.

  19. Effect of flask vibration time on casting integrity, Surface Penetration and Coating Inclusion in lost foam casting of Al-Si Alloy

    SciTech Connect (OSTI)

    Karimian, Majid [Dept. of Materials Engineering, Dept. of Mechanical Engineering, Khomeinishahr branch, Islamic Azad University-(Khomeinishahr- Isfahan) (Iran, Islamic Republic of); Idris, M. H. [Dept. of Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, University Technology Malaysia, Johor Bauru (Malaysia); Ourdjini, A.; Muthu, Kali [Dept. of Materials Engineering, Khomeinishahr branch, Islamic Azad University-(Khomeinishahr- Isfahan) (Iran, Islamic Republic of)

    2011-01-17

    The paper presents the result of an experimental investigation conducted on medium aluminum silicon alloy casting- LM6, using no-vacuum assisted lost foam casting process. The study is directed for establishing the relationship between the flask vibrations times developed for molded sample on the casting integrity, surface penetration and coating inclusion defects of the casting. Four different flask vibration times namely 180, 120, 90 and 60 sec. were investigated. The casting integrity was investigated in terms of fulfilling in all portions and edges. The surface penetration was measured using optical microscope whilst image analyzer was used to quantify the percentage of coating inclusion in the casting. The results show that vibration time has significant influence on the fulfilling as well as the internal integrity of the lost foam casting. It was found that the lower vibration time produced comparatively sound casing.

  20. Measurement of the inclusive jet cross section in p(p)over-bar collisions at root s=1.96 TeV

    SciTech Connect (OSTI)

    Abazov V. M.; Abbott B.; Acharya B. S.; Adams M.; Adams T.; Alexeev G. D.; Alkhazov G.; Alton A.; Alverson G.; Alves G. A.; Aoki M.; Askew A.; Asman B.; Atkins S.; Atramentov O.; Augsten K.; Avila C.; BackusMayes J.; Badaud F.; Bagby L.; Baldin B.; Bandurin D. V.; Banerjee S.; Barberis E.; Baringer P.; Barreto J.; Bartlett J. F.; Bassler U.; Bazterra V.; Bean A.; Begalli M.; Belanger-Champagne C.; Bellantoni L.; Beri S. B.; Bernardi G.; Bernhard R.; Bertram I.; Besancon M.; Beuselinck R.; Bezzubov V. A.; Bhat P. C.; Bhatnagar V.; Blazey G.; Blessing S.; Bloom K.; Boehnlein A.; Boline D.; Boos E. E.; Borissov G.; Bose T.; Brandt A.; Brandt O.; Brock R.; Brooijmans G.; Bross A.; Brown D.; Brown J.; Bu X. B.; Buehler M.; Buescher V.; Bunichev V.; Burdin S.; Burnett T. H.; Buszello C. P.; Calpas B.; Camacho-Perez E.; Carrasco-Lizarraga M. A.; Casey B. C. K.; Castilla-Valdez H.; Chakrabarti S.; Chakraborty D.; Chan K. M.; Chandra A.; Chapon E.; Chen G.; Chevalier-Thery S.; Cho D. K.; Cho S. W.; Choi S.; Choudhary B.; Cihangir S.; Claes D.; Clutter J.; Cooke M.; Cooper W. E.; Corcoran M.; Couderc F.; Cousinou M-C.; Croc A.; Cutts D.; Das A.; Davies G.; De K.; de Jong S. J.; De La Cruz-Burelo E.; Deliot F.; Demina R.; Denisov D.; Denisov S. P.; Desai S.; Deterre C.; DeVaughan K.; Diehl H. T.; Diesburg M.; Ding P. F.; Dominguez A.; Dorland T.; Dubey A.; Dudko L. V.; Duggan D.; Duperrin A.; Dutt S.; Dyshkant A.; Eads M.; Edmunds D.; Ellison J.; Elvira V. D.; Enari Y.; Evans H.; Evdokimov A.; Evdokimov V. N.; Facini G.; Ferbel T.; Fiedler F.; Filthaut F.; Fisher W.; Fisk H. E.; Fortner M.; Fox H.; Fuess S.; Garcia-Bellido A.; Garcia-Guerra G. A.; Gavrilov V.; Gay P.; Geng W.; Gerbaudo D.; Gerber C. E.; Gershtein Y.; Gillberg D.; Ginther G.; Golovanov G.; Goussiou A.; Grannis P. D.; Greder S.; Greenlee H.; Greenwood Z. D.; Gregores E. M.; Grenier G.; Gris Ph.; Grivaz J-F.; Grohsjean A.; Gruenendahl S.; Gruenewald M. W.; Guillemin T.; Gutierrez G.; Gutierrez P.; Haas A.; Hagopian S.; Haley J.; Han L.; Harder K.; Harel A.; Hauptman J. M.; Hays J.; Head T.; Hebbeker T.; Hedin D.; Hegab H.; Hegeman J. G.; Heinson A. P.; Heintz U.; Hensel C.; Heredia-De La Cruz I.; Herner K.; Hesketh G.; Hildreth M. D.; Hirosky R.; Hoang T.; Hobbs J. D.; Hoeneisen B.; Hohlfeld M.; Hubacek Z.; Hynek V.; Iashvili I.; Ilchenko Y.; Illingworth R.; Ito A. S.; Jabeen S.; Jaffre M.; Jamin D.; Jayasinghe A.; Jesik R.; Johns K.; Johnson M.; Jonckheere A.; Jonsson P.; Joshi J.; Jung A. W.; Juste A.; Kaadze K.; Kajfasz E.; Karmanov D.; Kasper P. A.; Katsanos I.; Kehoe R.; Kermiche S.; Khalatyan N.; Khanov A.; Kharchilava A.; Kharzheev Y. N.; Kohli J. M.; Kozelov A. V.; Kraus J.; Kulikov S.; Kumar A.; Kupco A.; Kurca T.; Kuzmin V. A.; Kvita J.; Lammers S.; Landsberg G.; Lebrun P.; Lee H. S.; Lee S. W.; Lee W. M.; Lellouch J.; Li L.; Li Q. Z.; Lietti S. M.; Lim J. K.; Lincoln D.; Linnemann J.; Lipaev V. V.; Lipton R.; Liu Y.; Lobodenko A.; Lokajicek M.; de Sa R. Lopes; Lubatti H. J.; Luna-Garcia R.; Lyon A. L.; Maciel A. K. A.; Mackin D.; Madar R.; Magana-Villalba R.; Makovec N.; Malik S.; Malyshev V. L.; Maravin Y.; Martinez-Ortega J.; McCarthy R.; McGivern C. L.; Meijer M. M.; Melnitchouk A.; Menezes D.; Mercadante P. G.; Merkin M.; Meyer A.; Meyer J.; et al.

    2012-03-20

    We present a measurement of the inclusive jet cross section using the Run II cone algorithm and data collected by the D0 experiment in p{bar p} collisions at a center-of-mass energy {radical}s = 1.96 TeV, corresponding to an integrated luminosity of 0.70 fb{sup -1}. The jet energy calibration and the method used to extract the inclusive jet cross section are described. We discuss the main uncertainties, which are dominated by the jet energy scale uncertainty. The results cover jet transverse momenta from 50 GeV to 600 GeV with jet rapidities in the range -2.4 to 2.4 and are compared to predictions using recent proton parton distribution functions. Studies of correlations between systematic uncertainties in transverse momentum and rapidity are presented.

  1. Inclusive and differential measurements of the t t-bar charge asymmetry in proton-proton collisions at sqrt(s) = 7 TeV

    SciTech Connect (OSTI)

    Chatrchyan, Serguei; et al.

    2012-10-01

    The t t-bar charge asymmetry is measured in events containing a charged lepton (electron or muon) and at least four jets, one of which is identified as originating from b-quark hadronization. The analyzed dataset corresponds to an integrated luminosity of 5.0 inverse femtobarns collected with the CMS detector at the LHC. An inclusive and three differential measurements of the t t-bar charge asymmetry as a function of rapidity, transverse momentum, and invariant mass of the t t-bar system are presented. The measured inclusive t t-bar charge asymmetry is A(C) = 0.004 +/- 0.010 (stat.) +/- 0.011 (syst.). This result and the three differential measurements are consistent with zero asymmetry as well as with the predictions of the standard model.

  2. Measurement of the lepton charge asymmetry in inclusive $W$ production in pp collisions at sqrt(s) = 7 TeV

    SciTech Connect (OSTI)

    Chatrchyan, V.; et al.,

    2011-04-01

    A measurement of the lepton charge asymmetry in inclusive pp to WX production at sqrt(s)= 7 TeV is presented based on data recorded by the CMS detector at the LHC and corresponding to an integrated luminosity of 36 inverse picobarns. This high precision measurement of the lepton charge asymmetry, performed in both the W to e nu and W to mu nu channels, provides new insights into parton distribution functions.

  3. Measurement of “pretzelosity” asymmetry of charged pion production in semi-inclusive deep inelastic scattering on a polarized He3 target

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Y.; Qian, X.; Allada, K.; Dutta, C.; Huang, J.; Katich, J.; Wang, Y.; Aniol, K.; Annand, J. R. M.; Averett, T.; et al

    2014-11-24

    An experiment to measure single-spin asymmetries in semi-inclusive production of charged pions in deep-inelastic scattering on a transversely polarized ³He target was performed at Jefferson Lab in the kinematic region of 0.16 < x < 0.35 and 1.4 < Q² < 2.7 GeV². Our results show that both π± on 3He and on neutron pretzelosity asymmetries are consistent with zero within experimental uncertainties.

  4. Inclusive Particle Production Data in E+E- Interactions: Data from DOE laboratory experiments as compiled in data reviews by the Durham High Energy Physics Database Group

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Lafferty, G. D.; Reeves, P. I.; Whalley, M. R.

    A comprehensive compilation of experimental data on inclusive particle production in e+e- interactions is presented. Data are given in both tabular and graphical form for multiplicities and inclusive differential cross sections from experiments at all of the world`s high energy e+e- colliders. To facilitate comparison between the data sets, curves are also shown from the JETSET 7.4 Monte Carlo program. (Taken from the abstract of A Compilation of Inclusive Particle Production Data in E+E- Annihilation, G.D. Lafferty, P.I. Reeves, and M.R. Whalley, Journal of Physics G (Nuclear and Particle Physics), Volume 21, Number 12A, 1995.) The Durham High Energy Physics (HEP) Database Group makes these data, extracted from papers and data reviews, available in one place in an easy-to-access format. These data are also included in the Durham HEP Reaction Data Database which can be searched at http://hepdata.cedar.ac.uk/reaction

  5. Recovery Act. Sub-Soil Gas and Fluid Inclusion Exploration and Slim Well Drilling, Pumpernickel Valley, Nevada

    SciTech Connect (OSTI)

    Fairbank, Brian D.

    2015-03-27

    Nevada Geothermal Power Company (NGP) was awarded DOE Award DE-EE0002834 in January 2010 to conduct sub-soil gas and fluid inclusion studies and slim well drilling at its Black Warrior Project (now known as North Valley) in Washoe and Churchill Counties, Nevada. The project was designed to apply highly detailed, precise, low-cost subsoil and down-hole gas geochemistry methods from the oil and gas industry to identify upflow zone drilling targets in an undeveloped geothermal prospect. NGP ran into multiple institutional barriers with the Black Warrior project relating to property access and extensive cultural survey requirement. NGP requested that the award be transferred to NGP’s Pumpernickel Valley project, due to the timing delay in obtaining permits, along with additional over-budget costs required. Project planning and permit applications were developed for both the original Black Warrior location and at Pumpernickel. This included obtaining proposals from contractors able to conduct required environmental and cultural surveying, designing the two-meter probe survey methodology and locations, and submitting Notices of Intent and liaising with the Bureau of Land Management to have the two-meter probe work approved. The award had an expiry date of April 30, 2013; however, due to the initial project delays at Black Warrior, and the move of the project from Black Warrior to Pumpernickel, NGP requested that the award deadline be extended. DOE was amenable to this, and worked with NGP to extend the deadline. However, following the loss of the Blue Mountain geothermal power plant in Nevada, NGP’s board of directors changed the company’s mandate to one of cash preservation. NGP was unable to move forward with field work on the Pumpernickel property, or any of its other properties, until additional funding was secured. NGP worked to bring in a project partner to form a joint venture on the property, or to buy the property. This was unsuccessful, and NGP notified the DOE on February 13, 2014 that it would not be able to complete the project objectives before the recovery act awards deadline and submitted a mutual termination request to the DOE which was accepted.

  6. Reactive transport modeling of stable carbon isotope fractionation in a multi-phase multi-component system during carbon sequestration

    SciTech Connect (OSTI)

    Zhang, Shuo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); DePaolo, Donald J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zheng, Liange [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mayer, Bernhard [Univ. of Calgary (Canada). Dept. of Geosciences

    2014-12-31

    Carbon stable isotopes can be used in characterization and monitoring of CO2 sequestration sites to track the migration of the CO2 plume and identify leakage sources, and to evaluate the chemical reactions that take place in the CO2-water-rock system. However, there are few tools available to incorporate stable isotope information into flow and transport codes used for CO2 sequestration problems. We present a numerical tool for modeling the transport of stable carbon isotopes in multiphase reactive systems relevant to geologic carbon sequestration. The code is an extension of the reactive transport code TOUGHREACT. The transport module of TOUGHREACT was modified to include separate isotopic species of CO2 gas and dissolved inorganic carbon (CO2, CO32-, HCO3-,). Any process of transport or reaction influencing a given carbon species also influences its isotopic ratio. Isotopic fractionation is thus fully integrated within the dynamic system. The chemical module and database have been expanded to include isotopic exchange and fractionation between the carbon species in both gas and aqueous phases. The performance of the code is verified by modeling ideal systems and comparing with theoretical results. Efforts are also made to fit field data from the Pembina CO2 injection project in Canada. We show that the exchange of carbon isotopes between dissolved and gaseous carbon species combined with fluid flow and transport, produce isotopic effects that are significantly different from simple two-component mixing. These effects are important for understanding the isotopic variations observed in field demonstrations.

  7. Reactive transport modeling of stable carbon isotope fractionation in a multi-phase multi-component system during carbon sequestration

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Shuo; DePaolo, Donald J.; Zheng, Liange; Mayer, Bernhard

    2014-12-31

    Carbon stable isotopes can be used in characterization and monitoring of CO2 sequestration sites to track the migration of the CO2 plume and identify leakage sources, and to evaluate the chemical reactions that take place in the CO2-water-rock system. However, there are few tools available to incorporate stable isotope information into flow and transport codes used for CO2 sequestration problems. We present a numerical tool for modeling the transport of stable carbon isotopes in multiphase reactive systems relevant to geologic carbon sequestration. The code is an extension of the reactive transport code TOUGHREACT. The transport module of TOUGHREACT was modifiedmore » to include separate isotopic species of CO2 gas and dissolved inorganic carbon (CO2, CO32-, HCO3-,…). Any process of transport or reaction influencing a given carbon species also influences its isotopic ratio. Isotopic fractionation is thus fully integrated within the dynamic system. The chemical module and database have been expanded to include isotopic exchange and fractionation between the carbon species in both gas and aqueous phases. The performance of the code is verified by modeling ideal systems and comparing with theoretical results. Efforts are also made to fit field data from the Pembina CO2 injection project in Canada. We show that the exchange of carbon isotopes between dissolved and gaseous carbon species combined with fluid flow and transport, produce isotopic effects that are significantly different from simple two-component mixing. These effects are important for understanding the isotopic variations observed in field demonstrations.« less

  8. METHOD FOR THE PREPARATION OF STABLE ACTINIDE METAL OXIDE-CONTAINING SLURRIES AND OF THE OXIDES THEREFOR

    DOE Patents [OSTI]

    Hansen, R.S.; Minturn, R.E.

    1958-02-25

    This patent deals with a method of preparing actinide metal oxides of a very fine particle size and of forming stable suspensions therefrom. The process consists of dissolving the nitrate of the actinide element in a combustible organic solvent, converting the solution obtained into a spray, and igniting the spray whereby an oxide powder is obtained. The oxide powder is then slurried in an aqueous soiution of a substance which is adsorbable by said oxides, dspersed in a colloid mill whereby a suspension is obtained, and electrodialyzed until a low spectiic conductance is reached.

  9. CO2 and CH4 Surface Flux, Soil Profile Concentrations, and Stable Isotope Composition, Barrow, Alaska, 2012-2013

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Curtis, J.B.; Vaughn, L.S.; Torn, M.S.; Conrad, M.S.; Chafe, O.; Bill, M.

    2015-12-31

    In August-October 2012 and June-October 2013, co-located measurements were made of surface CH4 and CO2 flux, soil pore space concentrations and stable isotope compositions of CH4 and CO2, and subsurface temperature and soil moisture. Measurements were made in intensive study site 1 areas A, B, and C, and from the site 0 and AB transects, from high-centered, flat-centered, and low-centered polygons, from the center, edge, and trough of each polygon.

  10. Efficient, air-stable colloidal quantum dot solar cells encapsulated using atomic layer deposition of a nanolaminate barrier

    SciTech Connect (OSTI)

    Ip, Alexander H.; Labelle, Andr J.; Sargent, Edward H.

    2013-12-23

    Atomic layer deposition was used to encapsulate colloidal quantum dot solar cells. A nanolaminate layer consisting of alternating alumina and zirconia films provided a robust gas permeation barrier which prevented device performance degradation over a period of multiple weeks. Unencapsulated cells stored in ambient and nitrogen environments demonstrated significant performance losses over the same period. The encapsulated cell also exhibited stable performance under constant simulated solar illumination without filtration of harsh ultraviolet photons. This monolithically integrated thin film encapsulation method is promising for roll-to-roll processed high efficiency nanocrystal solar cells.

  11. Static and dynamic polarizabilities of Na{sup -} within a variationally stable coupled-channel hyperspherical method

    SciTech Connect (OSTI)

    Masili, Mauro; Groote, J.J. de

    2004-11-01

    Using a model potential representation combined with a variationally stable method, we present a precise calculation of the electric dipole polarizabilities of the sodium negative ion (Na{sup -}). The effective two-electron eigensolutions for Na{sup -} are obtained from a hyperspherical coupled-channel calculation. This approach allows efficient error control and insight into the system's properties through one-dimensional potential curves. Our result of 1018.3 a.u. for the static dipole polarizability is in agreement with previous calculations and supports our results for the dynamic polarizability, which has scarcely been investigated hitherto.

  12. Measurements of stable isotope ratios in milk samples from a farm placed in the mountains of Transylvania

    SciTech Connect (OSTI)

    Magdas, D. A. Cristea, G. Bot, A.; Puscas, R.; Radu, S.; Mirel, V.; Cordea, D. V.; Mihaiu, M.

    2013-11-13

    Product origin is of great importance for consumers especially because its association in consumer's perception with food quality, freedom from disease or pollution. Stable isotope ratio analysis is a powerful technique in food authenticity and traceability control which has been introduced within the European wine industry to ensure authenticity of wine provenance and to detect adulteration. Isotopic ratios measurements have also been successfully to other food commodities like: fruit juices, honey and dairy foods. The δ{sup 18}O and δ{sup 2}H content in milk water reflects the isotope composition of the ground water drunk by animals. Seasonal effects are also very important: in summer, milk water contains higher δ{sup 18}O and δ{sup 2}H values due to the fresh plants that are ate by animals. Relative carbon stable isotope abundances in total milk reflect the isotopic composition of the diet fed to the dairy cows. In this study the hydrogen, oxygen and carbon isotopic composition of 15 milk samples coming from a unit placed in the mountains of Transylvania was investigated. The distribution of the obtained isotopic values was than discussed taking into account that all the animals were feed with the same type of forage and consumed water was taken from the same source.

  13. Horizontal-Velocity and Variance Measurements in the Stable Boundary Layer Using Doppler Lidar: Sensitivity to Averaging Procedures

    SciTech Connect (OSTI)

    Pichugina, Yelena L.; Banta, Robert M.; Kelley, Neil D.; Jonkman, Bonnie J.; Tucker, Sara C.; Newsom, Rob K.; Brewer, W. A.

    2008-08-01

    Quantitative data on turbulence variables aloft--above the region of the atmosphere conveniently measured from towers--has been an important but difficult measurement need for advancing understanding and modeling of the stable boundary layer (SBL). Vertical profiles of streamwise velocity variances obtained from NOAAs High Resolution Doppler Lidar (HRDL), which have been shown to be numerically equivalent to turbulence kinetic energy (TKE) for stable conditions, are a measure of the turbulence in the SBL. In the present study, the mean horizontal wind component U and variance ?u2 were computed from HRDL measurements of the line-of-sight (LOS) velocity using a technique described in Banta, et al. (2002). The technique was tested on datasets obtained during the Lamar Low-Level Jet Project (LLLJP) carried out in early September 2003, near the town of Lamar in southeastern Colorado. This paper compares U with mean wind speed obtained from sodar and sonic anemometer measurements. It then describes several series of averaging tests that produced the best correlation between TKE calculated from sonic anemometer data at several tower levels and lidar measurements of horizontal velocity variance ?u2. The results show high correlation (0.71-0.97) of the mean U and average wind speed measured by sodar and in-situ instruments, independent of sampling strategies and averaging procedures. Comparison of estimates of variance, on the other hand, proved sensitive to both the spatial and temporal averaging techniques.

  14. Dipole-Strength Distributions Below the Giant Dipole Resonance in the Stable Even-Mass Molybdenum Isotopes

    SciTech Connect (OSTI)

    Rusev, G.; Hutcheson, A. L.; Kwan, E.; Tonchev, A. P.; Tornow, W.; Angell, C. T.; Hammond, S. L.; Kawowski, H. J.; Beyer, R.; Doenau, F.; Erhard, M.; Grosse, E.; Frauendorf, S.; Junghans, A. R.; Klug, J.; Kosev, K.; Nair, C.; Nikolov, N.; Schilling, K.-D.; Schwengner, R.

    2009-03-10

    Dipole-strength distributions in the stable even-mass molybdenum isotopes up to the neutron-separation energies have been studied in photon-scattering experiments with bremsstrahlung at the superconducting electron accelerator ELBE at the Research Center Dresden-Rossendorf, Germany, and with mono-energetic photon beams at the High Intensity Gamma-ray Source facility at Triangle Universities Nuclear Laboratory. In order to determine the dipole-strength distribution, statistical methods were developed for the analysis of the measured spectra. The data obtained for the stable even-mass molybdenum isotopes from the present ({gamma},{gamma}') experiments are combined with ({gamma},n) cross sections from the literature resulting in a photoabsorption cross section covering the full range from about 4 to 15 MeV, which is of interest for nuclear structure as well as for nuclear astrophysics network calculations. Novel information about the low-energy tail of the Giant Dipole Resonance and the energy spreading of its strength is derived.

  15. Measurement of the inclusive isolated prompt photon production cross section at the Tevatron using the CDF detector

    SciTech Connect (OSTI)

    Deluca Silberberg, Carolina; /Barcelona, IFAE

    2009-04-01

    In this thesis we present the measurement of the inclusive isolated prompt photon cross section with a total integrated luminosity of 2.5 fb{sup -1} of data collected with the CDF Run II detector at the Fermilab Tevatron Collider. The prompt photon cross section is a classic measurement to test perturbative QCD (pQCD) with potential to provide information on the parton distribution function (PDF), and sensitive to the presence of new physics at large photon transverse momentum. Prompt photons also constitute an irreducible background for important searches such as H {yields} {gamma}{gamma}, or SUSY and extra-dimensions with energetic photons in the final state. The Tevatron at Fermilab (Batavia, U.S.A.) is currently the hadron collider that operates at the highest energies in the world. It collides protons and antiprotons with a center-of-mass energy of 1.96 TeV. The CDF and the D0 experiments are located in two of its four interaction regions. In Run I at the Tevatron, the direct photon production cross section was measured by both CDF and DO, and first results in Run II have been presented by the DO Collaboration based on 380 pb{sup -1}. Both Run I and Run II results show agreement with the theoretical predictions except for the low p{sub T}{sup {gamma}} region, where the observed and predicted shapes are different. Prompt photon production has been also extensively measured at fixed-target experiments in lower p{sub T}{sup {gamma}} ranges, showing excess of data compared to the theory, particularly at high x{sub T}. From an experimental point of view, the study of the direct photon production has several advantages compared to QCD studies using jets. Electromagnetic calorimeters have better energy resolution than hadronic calorimeters, and the systematic uncertainty on the photon absolute energy scale is smaller. Furthermore, the determination of the photon kinematics does not require the use of jet algorithms. However, the measurements using photons require a good understanding of the background, mainly dominated by light mesons ({pi}{sup 0} and {eta}) which decay into two very collinear photons. Since these photons are produced within a jet, they tend to be non-isolated in most of the cases, and can be suppressed by requiring the photon candidates to be isolated in the calorimeter. In the case the hard scattered parton hadronizes leaving most of its energy to the meson, the photon produced in the decay will not be surrounded by large energy depositions. To further reduce this remaining isolated background, we present a new technique based on the isolation distribution in the calorimeter. The measured cross section is compared to next-to-leading order (NLO) pQCD calculations, which have been corrected for non-perturbative contributions. This thesis is organized as follows: we start with a brief review of QCD theory and the formalism to calculate cross sections in Chapter 2, where we also introduce the physics of prompt photon production and summarize the current status of the prompt photon phenomenology. Chapter 3 contains a description of the Tevatron and the CDF detector. The experimental measurement is described in Chapter 4, where we provide details on the different datasets used in the measurement, the trigger, and the event selection requirements. Most of this Chapter is devoted to the explanation of the background subtraction method and the determination of the photon signal fraction. The systematic uncertainties on the measurement are evaluated in Chapter 5, while Chapter 6 discusses the final results and the comparison to the theoretical predictions. Finally, the conclusions are presented in Chapter 7.

  16. Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at root s=7 TeV with the ATLAS detector

    SciTech Connect (OSTI)

    Aad, G.; Abbott, B; Abdallah, J; Abdelalim, AA; Abdesselam, A; Abdinov, O; Abi, B; Abolins, M; Abramowicz, H; Abreu, H; Acerbi, E; Acharya, BS; Adams, DL; Addy, TN; Adelman, J; Aderholz, M; Adomeit, S; Adragna, P; Adye, T; Aefsky, S; Aguilar-Saavedra, JA; A

    2011-12-01

    The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of {radical}s = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb{sup -1}. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < p{sub T} < 400 GeV and rapidity in the range |y| < 2.1. The b{bar b}-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m{sub jj} < 760 GeV, the azimuthal angle difference between the two jets and the angular variable {chi} in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC{at}NLO + Herwig shows good agreement with the measured b{bar b}-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.

  17. Distributions of topological observables in inclusive three- and four-jet events in pp collisions at √s = 7 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, Vardan

    2015-07-01

    This paper presents distributions of topological observables in inclusive three- and four-jet events produced in pp collisions at a centre-of-mass energy of 7TeV with a data sample collected by the CMS experiment corresponding to a luminosity of 5.1fb-1. We corrected the distributions for detector effects, and compared with several event generators based on two- and multi-parton matrix elements at leading order. Thus, among the considered calculations, MADGRAPH interfaced with PYTHIA6displays the overall best agreement with data.

  18. Distributions of topological observables in inclusive three- and four-jet events in pp collisions at ?s=7 TeV

    SciTech Connect (OSTI)

    Khachatryan, V.

    2015-07-01

    This paper presents distributions of topological observables in inclusive three- and four-jet events produced in pp collisions at a centre-of-mass energy of 7TeV with a data sample collected by the CMS experiment corresponding to a luminosity of 5.1fb-1. The distributions are corrected for detector effects, and compared with several event generators based on two- and multi-parton matrix elements at leading order. Among the considered calculations, MadGraph interfaced with pythia6 displays the overall best agreement with data.

  19. Distributions of topological observables in inclusive three- and four-jet events in pp collisions at ?s=7 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, V.

    2015-07-01

    This paper presents distributions of topological observables in inclusive three- and four-jet events produced in pp collisions at a centre-of-mass energy of 7TeV with a data sample collected by the CMS experiment corresponding to a luminosity of 5.1fb-1. The distributions are corrected for detector effects, and compared with several event generators based on two- and multi-parton matrix elements at leading order. Among the considered calculations, MadGraph interfaced with pythia6 displays the overall best agreement with data.

  20. Introducing thermally stable inter-tube defects to assist off-axial phonon transport in carbon nanotube films

    SciTech Connect (OSTI)

    Wang, Jing [Department of Materials Science and Engineering, Texas A and M University, College Station, Texas 77843 (United States); Chen, Di; Wallace, Joseph; Gigax, Jonathan; Wang, Xuemei [Department of Nuclear Engineering, Texas A and M University, College Station, Texas, 77843 (United States); Shao, Lin, E-mail: lshao@tamu.edu [Department of Materials Science and Engineering, Texas A and M University, College Station, Texas 77843 (United States); Department of Nuclear Engineering, Texas A and M University, College Station, Texas, 77843 (United States)

    2014-05-12

    Through integrated molecular dynamics (MD) simulations and experimental studies, we demonstrated the feasibility of an ion-irradiation-and-annealing based phonon engineering technique to enhance thermal conductivity of carbon nanotube (CNT) films. Upon ion irradiation of CNT films, both inter-tube defects and intra-tube defects are introduced. Our MD simulations show that inter-tube defects created between neighboring tubes are much more stable than intra-tube defects created on tube graphitic planes. Upon thermal annealing, intra-tube defects are preferentially removed but inter-tube defects stay. Consequently, axial phonon transport increases due to reduced phonon scattering and off-axial phonon transport is sustained due to the high stability of inter-tube defects, leading to a conductivity enhancement upon annealing. The modeling predictions agree with experimental observations that thermal conductivities of CNT films were enhanced after 2?MeV hydrogen ion irradiations and conductivities were further enhanced upon post irradiation annealing.

  1. Research on stable, high-efficiency amorphous silicon multijunction modules. Semiannual subcontract report, 1 March 1993--30 November 1993

    SciTech Connect (OSTI)

    Guha, S.

    1994-03-01

    This report describes the progress made during the first half of Phase III of the R&D program to obtain high-efficiency amorphous silicon alloy multijunction modules. The highlight of the work includes (1) demonstration of the world`s highest initial module efficiency (area of 0.09 m{sup 2}) of 11.4% as confirmed by NREL, and (2) demonstration of stable module efficiency of 9.5% after 1-sun light soaking for 1000 h at 50{degrees}C. In addition, fundamental studies were carried out to improve material properties of the component cells of the multijunction structure and to understand the optical losses associated with the back reflector.

  2. Low-dimensional hyperthin FeS2 nanostructures for efficient and stable hydrogen evolution electrocatalysis

    SciTech Connect (OSTI)

    Jasion, Daniel; Qiao, Qiao; Barforoush, Joseph M.; Zhu, Yimei; Ren, Shenqiang; Leonard, Kevin C.

    2015-10-05

    We report a scalable, solution-processing method for synthesizing low-dimensional hyperthin FeS2 nanostructures, and we show that 2D FeS2 disc nanostructures are an efficient and stable hydrogen evolution electrocatalyst. By changing the Fe:S ratio in the precursor solution, we were able to preferentially synthesize either 1D wire or 2D disc nanostructures. The 2D FeS2 disc structure has the highest electrocatalytic activity for the hydrogen evolution reaction, comparable to platinum in neutral pH conditions. Moreover, the ability of the FeS2 nanostructures to generate hydrogen was confirmed by scanning electrochemical microscopy, and the 2D disc nanostructures were able to generate hydrogen for over 125 h.

  3. A Stable Vanadium Redox-Flow Battery with High Energy Density for Large-scale Energy Storage

    SciTech Connect (OSTI)

    Li, Liyu; Kim, Soowhan; Wang, Wei; Vijayakumar, M.; Nie, Zimin; Chen, Baowei; Zhang, Jianlu; Xia, Guanguang; Hu, Jian Z.; Graff, Gordon L.; Liu, Jun; Yang, Zhenguo

    2011-05-01

    Low cost, high performance redox flow batteries are highly demanded for up to multi-megawatt levels of renewable and grid energy storage. Here, we report a new vanadium redox flow battery with a significant improvement over the current technologies. This new battery utilizes a sulfate-chloride mixed solution, which is capable of dissolving more than 2.5 M vanadium or about a 70% increase in the energy storage capacity over the current vanadium sulfate system. More importantly, the new electrolyte remains stable over a wide temperature range of -5 to 60oC, potentially eliminating the need of active heat management. Its high energy density, broad operational temperature window, and excellent electrochemical performance would lead to a significant reduction in the cost of energy storage, thus accelerating its market penetration.

  4. A New Type of Steady and Stable, Laminar, Premixed Flame in Ultra-Lean, Hydrogen-Air Combustion

    SciTech Connect (OSTI)

    Grcar, Joseph F; Grcar, Joseph F

    2008-06-30

    Ultra-lean, hydrogen-air mixtures are found to support another kind of laminar flame that is steady and stable beside flat flames and flame balls. Direct numerical simulations are performed of flames that develop into steadily and stably propagating cells. These cells were the original meaning of the word"flamelet'' when they were observed in lean flammability studies conducted early in the development of combustion science. Several aspects of these two-dimensional flame cells are identified and are contrasted with the properties of one-dimensional flame balls and flat flames. Although lean hydrogen-air flames are subject to thermo-diffusive effects, in this case the result is to stabilize the flame rather than to render it unstable. The flame cells may be useful as basic components of engineering models for premixed combustion when the other types of idealized flames are inapplicable.

  5. Understanding the stable boron clusters: A bond model and first-principles calculations based on high-throughput screening

    SciTech Connect (OSTI)

    Xu, Shao-Gang; Liao, Ji-Hai; Zhao, Yu-Jun; Yang, Xiao-Bao

    2015-06-07

    The unique electronic property induced diversified structure of boron (B) cluster has attracted much interest from experimentalists and theorists. B{sub 30–40} were reported to be planar fragments of triangular lattice with proper concentrations of vacancies recently. Here, we have performed high-throughput screening for possible B clusters through the first-principles calculations, including various shapes and distributions of vacancies. As a result, we have determined the structures of B{sub n} clusters with n = 30–51 and found a stable planar cluster of B{sub 49} with a double-hexagon vacancy. Considering the 8-electron rule and the electron delocalization, a concise model for the distribution of the 2c–2e and 3c–2e bonds has been proposed to explain the stability of B planar clusters, as well as the reported B cages.

  6. Stable radiometal antibody immunoconjugates

    DOE Patents [OSTI]

    Mease, R.C.; Srivastava, S.C.; Gestin, J.F.

    1994-08-02

    The present invention relates to new rigid chelating structures, to methods for preparing these materials, and to their use in preparing radiometal labeled immunoconjugates. These new chelates include cyclohexyl EDTA monohydride, the trans forms of cyclohexyl DTPA and TTHA, and derivatives of these cyclohexyl polyaminocarboxylate materials. No Drawings

  7. Electrochemically stable electrolytes

    DOE Patents [OSTI]

    Angell, C.A.; Zhang, S.S.; Xu, K.

    1999-01-05

    This invention relates generally to inorganic ionic liquids which function as electrolytes and do not crystallize at ambient temperature. More specifically, this invention is directed to quasi-salt inorganic ionic liquids which comprise the reaction product of a strong Lewis acid with an inorganic halide-donating molecule. This invention is further directed to quasi-salt inorganic ionic liquid mixtures which comprise combinations of electrolyte additives and quasi-salt inorganic ionic liquids. These quasi-salt inorganic ionic liquid mixtures are useful electrolytes. 16 figs.

  8. Electrochemically stable electrolytes

    DOE Patents [OSTI]

    Angell, Charles Austen; Zhang, Sheng-Shui; Xu, Kang

    1999-01-01

    This invention relates generally to inorganic ionic liquids which function as electrolytes and do not crystallize at ambient temperature. More specifically, this invention is directed to quasi-salt inorganic ionic liquids which comprise the reaction product of a strong Lewis acid with an inorganic halide-donating molecule. This invention is further directed to quasi-salt inorganic ionic liquid mixtures which comprise combinations of electrolyte additives and quasi-salt inorganic ionic liquids. These quasi-salt inorganic ionic liquid mixtures are useful electrolytes.

  9. Highly stable aerosol generator

    DOE Patents [OSTI]

    DeFord, H.S.; Clark, M.L.

    1981-11-03

    An improved compressed air nebulizer has been developed such that a uniform aerosol particle size and concentration may be produced over long time periods. This result is achieved by applying a vacuum pressure to the makeup assembly and by use of a vent tube between the atmosphere and the makeup solution. By applying appropriate vacuum pressures to the makeup solution container and by proper positioning of the vent tube, a constant level of aspirating solution may be maintained within the aspirating assembly with aspirating solution continuously replaced from the makeup solution supply. This device may also be adapted to have a plurality of aerosol generators and only one central makeup assembly. 2 figs.

  10. Residential propane prices stable

    U.S. Energy Information Administration (EIA) Indexed Site

    propane price decreases The average retail price for propane is 2.40 per gallon, down 9-tenths of a cent from last week, based on the residential heating fuel survey by the U.S. ...

  11. Highly stable aerosol generator

    DOE Patents [OSTI]

    DeFord, Henry S.; Clark, Mark L.

    1981-01-01

    An improved compressed air nebulizer has been developed such that a uniform aerosol particle size and concentration may be produced over long time periods. This result is achieved by applying a vacuum pressure to the makeup assembly and by use of a vent tube between the atmosphere and the makeup solution. By applying appropriate vacuum pressures to the makeup solution container and by proper positioning of the vent tube, a constant level of aspirating solution may be maintained within the aspirating assembly with aspirating solution continuously replaced from the makeup solution supply. This device may also be adapted to have a plurality of aerosol generators and only one central makeup assembly.

  12. Thermally stable diamond brazing

    DOE Patents [OSTI]

    Radtke, Robert P. (Kingwood, TX)

    2009-02-10

    A cutting element and a method for forming a cutting element is described and shown. The cutting element includes a substrate, a TSP diamond layer, a metal interlayer between the substrate and the diamond layer, and a braze joint securing the diamond layer to the substrate. The thickness of the metal interlayer is determined according to a formula. The formula takes into account the thickness and modulus of elasticity of the metal interlayer and the thickness of the TSP diamond. This prevents the use of a too thin or too thick metal interlayer. A metal interlayer that is too thin is not capable of absorbing enough energy to prevent the TSP diamond from fracturing. A metal interlayer that is too thick may allow the TSP diamond to fracture by reason of bending stress. A coating may be provided between the TSP diamond layer and the metal interlayer. This coating serves as a thermal barrier and to control residual thermal stress.

  13. ARM - Instrument - stable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    around the long axis of the ship (roll), short axis (pitch), and, for some instruments, vertical axis (yaw). ARM currently employs two types of stabilized platforms: one...

  14. Stable mirror mount

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Bulls Gap, TN)

    1990-01-01

    An improved mirror mount assembly is disclosed. The mirror mount assembly provides a post assembly slidable in a Y-axis orientation and a nut plate assembly slidable in an X-axis orientation and a device for simultaneously locking the post assembly and the key assembly in a fixed position.

  15. Stable radiometal antibody immunoconjugates

    DOE Patents [OSTI]

    Mease, Ronnie C.; Srivastava, Suresh C.; Gestin, Jean-Francois

    1994-01-01

    The present invention relates to new rigid chelating structures, to methods for preparing these materials, and to their use in preparing radiometal labeled immunoconjugates. These new chelates include cyclohexyl EDTA monohydride, the trans forms of cyclohexyl DTPA and TTHA, and derivatives of these cyclohexyl polyaminocarboxylate materials.

  16. Stable mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1983-11-04

    An improved mirror mount assembly is disclosed. The mirror mount assembly provides a post assembly slidable in a Y-axis orientation and a nut plate assembly slidable in an X-axis orientation and means for simultaneously locking said post assembly and said key assembly in a fixed position.

  17. Volume 1, 1st Edition, Multiscale Tailoring of Highly Active and Stable Nanocomposite Catalysts, Final Technical Report

    SciTech Connect (OSTI)

    Veser, Goetz

    2009-08-31

    Nanomaterials have gained much attention as catalysts since the discovery of exceptional CO oxidation activity of nanoscale gold by Haruta. However, many studies avoid testing nanomaterials at the high-temperatures relevant to reactions of interest for the production of clean energy (T > 700C). The generally poor thermal stability of catalytically active noble metals has thus far prevented significant progress in this area. We have recently overcome the poor thermal stability of nanoparticles by synthesizing a platinum barium-hexaaluminate (Pt-BHA) nanocomposite which combines the high activity of noble metal nanoparticles with the thermal stability of hexaaluminates. This Pt-BHA nanocomposite demonstrates excellent activity, selectivity, and long-term stability in CPOM. Pt-BHA is anchored onto a variety of support structures in order to improve the accessibility, safety, and reactivity of the nanocatalyst. Silica felts prove to be particularly amenable to this supporting procedure, with the resulting supported nanocatalyst proving to be as active and stable for CPOM as its unsupported counterpart. Various pre-treatment conditions are evaluated to determine their effectiveness in removing residual surfactant from the active nanoscale platinum particles. The size of these particles is measured across a wide temperature range, and the resulting plateau of stability from 600-900C can be linked to a particle caging effect due to the structure of the supporting ceramic framework. The nanocomposites are used to catalyze the combustion of a dilute methane stream, and the results indicate enhanced activity for both Pt-BHA as well as ceria-doped BHA, as well as an absence of internal mass transfer limitations at the conditions tested. In water-gas shift reaction, nanocomposite Pt-BHA shows stability during prolonged WGS reaction and no signs of deactivation during start-up/shut-down of the reactor. The chemical and thermal stability, low molecular weight, and wealth of literature on the formation of mesoporous silica materials motivated investigations of nanocomposite silica catalysts. High surface area silicas are synthesized via sol-gel methods, and the addition of metal-salts lead to the formation of stable nanocomposite Ni- and Fe- silicates. The results of these investigations have increased the fundamental understanding and improved the applicability of nanocatalysts for clean energy applications.

  18. Horizontal Velocity and Variance Measurements in the Stable Boundary Layer Using Doppler Lidar: Sensitivity to Averaging Procedures

    SciTech Connect (OSTI)

    Pichugina, Y. L.; Banta, R. M.; Kelley, N. D.; Jonkman, B. J.; Tucker, S. C.; Newsom, R. K.; Brewer, W. A.

    2008-08-01

    Quantitative data on turbulence variables aloft--above the region of the atmosphere conveniently measured from towers--have been an important but difficult measurement need for advancing understanding and modeling of the stable boundary layer (SBL). Vertical profiles of streamwise velocity variances obtained from NOAA's high-resolution Doppler lidar (HRDL), which have been shown to be approximately equal to turbulence kinetic energy (TKE) for stable conditions, are a measure of the turbulence in the SBL. In the present study, the mean horizontal wind component U and variance {sigma}2u were computed from HRDL measurements of the line-of-sight (LOS) velocity using a method described by Banta et al., which uses an elevation (vertical slice) scanning technique. The method was tested on datasets obtained during the Lamar Low-Level Jet Project (LLLJP) carried out in early September 2003, near the town of Lamar in southeastern Colorado. This paper compares U with mean wind speed obtained from sodar and sonic anemometer measurements. The results for the mean U and mean wind speed measured by sodar and in situ instruments for all nights of LLLJP show high correlation (0.71-0.97), independent of sampling strategies and averaging procedures, and correlation coefficients consistently >0.9 for four high-wind nights, when the low-level jet speeds exceeded 15 m s{sup -1} at some time during the night. Comparison of estimates of variance, on the other hand, proved sensitive to both the spatial and temporal averaging parameters. Several series of averaging tests are described, to find the best correlation between TKE calculated from sonic anemometer data at several tower levels and lidar measurements of horizontal-velocity variance {sigma}{sup 2}{sub u}. Because of the nonstationarity of the SBL data, the best results were obtained when the velocity data were first averaged over intervals of 1 min, and then further averaged over 3-15 consecutive 1-min intervals, with best results for the 10- and 15-min averaging periods. For these cases, correlation coefficients exceeded 0.9. As a part of the analysis, Eulerian integral time scales ({tau}) were estimated for the four high-wind nights. Time series of {tau} through each night indicated erratic behavior consistent with the nonstationarity. Histograms of {tau} showed a mode at 4-5 s, but frequent occurrences of larger {tau} values, mostly between 10 and 100 s.

  19. Measurement of the Inclusive Isolated Prompt Photon Cross Section in ppbar Collisions at sqrt{s} = 1.96 TeV using the CDF Detector

    SciTech Connect (OSTI)

    Aaltonen, T.; Adelman, J.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Apresyan, A.; Arisawa, T.; /Waseda U. /Dubna, JINR

    2009-10-01

    A measurement of the cross section for the inclusive production of isolated photons by the CDF experiment at the Fermilab Tevatron collider is presented. The measurement covers the pseudorapidity region |{eta}{sup {gamma}}| < 1.0 and the transverse energy range E{sub T}{sup {gamma}} > 30 GeV and is based on 2.5 fb{sup -1} of integrated luminosity. The sample is almost a factor of seven larger than those used for recent published results and extends the E{sub T}{sup {gamma}} coverage by 100 GeV. The result agrees with next-to-leading order perturbative QCD calculations within uncertainties over the range 50 < E{sub T}{sup {gamma}} < 400 GeV, though the energy spectrum in the data shows a steeper slope at lower E{sub T}{sup {gamma}}.

  20. Measurement of distributions sensitive to the underlying event in inclusive Z-boson production in pp collisions at ?s = 7 TeV with the ATLAS detector

    SciTech Connect (OSTI)

    Aad, G.

    2014-12-10

    A measurement of charged-particle distributions sensitive to the properties of the underlying event is presented for an inclusive sample of events containing a \\(Z\\)-boson, decaying to an electron or muon pair. The measurement is based on data collected using the ATLAS detector at the LHC in protonproton collisions at a centre-of-mass energy of \\(7\\) TeV with an integrated luminosity of \\(4.6\\) fb\\(^{-1}\\). Distributions of the charged particle multiplicity and of the charged particle transverse momentum are measured in regions of azimuthal angle defined with respect to the \\(Z\\)-boson direction. As a result, the measured distributions are compared to similar distributions measured in jet events, and to the predictions of various Monte Carlo generators implementing different underlying event models.

  1. Measurement of the inclusive isolated prompt photon cross section in pp collisions at √s=7 TeV with the ATLAS detector

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aad, G.; Abbott, B.; Abdallah, J.; Abdelalim, A. A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; Abramowicz, H.; Abreu, H.; et al

    2011-03-18

    A measurement of the cross section for the inclusive production of isolated prompt photons in pp collisions at a center-of-mass energy √s=7 TeV is presented. The measurement covers the pseudorapidity ranges |ηγ|<1.37 and 1.52≤|ηγ|<1.81 in the transverse energy range 15≤EγT<100 GeV. The results are based on an integrated luminosity of 880 nb-1, collected with the ATLAS detector at the Large Hadron Collider. Photon candidates are identified by combining information from the calorimeters and from the inner tracker. Residual background in the selected sample is estimated from data based on the observed distribution of the transverse isolation energy in a narrowmore » cone around the photon candidate. The results are compared to predictions from next-to-leading-order perturbative QCD calculations.« less

  2. Single spin asymmetries in charged kaon production from semi-inclusive deep inelastic scattering on a transversely polarized He3 target

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhao, Y. X.; Wang, Y.; Allada, K.; Aniol, K.; Annand, J. R.M.; Averett, T.; Benmokhtar, F.; Bertozzi, W.; Bradshaw, P. C.; Bosted, P.; et al

    2014-11-03

    We report the first measurement of target single spin asymmetries of charged kaons produced in semi-inclusive deep inelastic scattering of electrons off a transversely polarized 3He target. Both the Collins and Sivers moments, which are related to the nucleon transversity and Sivers distributions, respectively, are extracted over the kinematic range of 0.1 < xbj<0.4 for K+ and K– production. While the Collins and Sivers moments for K+ are consistent with zero within the experimental uncertainties, both moments for K– favor negative values. The Sivers moments are compared to the theoretical prediction from a phenomenological fit to the world data. Whilemore » the K+ Sivers moments are consistent with the prediction, the K– results differ from the prediction at the 2-sigma level.« less

  3. Structural analysis of the KRIT1 ankyrin repeat and FERM domains reveals a conformationally stable ARD-FERM interface

    SciTech Connect (OSTI)

    Zhang, Rong; Li, Xiaofeng; Boggon, Titus J.

    2015-10-14

    Cerebral cavernous malformations (CCM) are vascular dysplasias that usually occur in the brain and are associated with mutations in the KRIT1/CCM1, CCM2/MGC4607/OSM/Malcavernin, and PDCD10/CCM3/ TFAR15 genes. Here we report the 2.9 Å crystal structure of the ankyrin repeat domain (ARD) and FERM domain of the protein product of KRIT1 (KRIT1; Krev interaction trapped 1). The crystal structure reveals that the KRIT1 ARD contains 4 ankyrin repeats. There is also an unusual conformation in the ANK4 repeat that is stabilized by Trp-404, and the structure reveals a solvent exposed ankyrin groove. Domain orientations of the three copies within the asymmetric unit suggest a stable interaction between KRIT1 ARD and FERM domains, indicating a globular ARD–FERM module. It resembles the additional F0 domain found N-terminal to the FERM domain of talin. Structural analysis of KRIT1 ARD–FERM highlights surface regions of high evolutionary conservation, and suggests potential sites that could mediate interaction with binding partners. The structure therefore provides a better understanding of KRIT1 at the molecular level.

  4. Topology-guided design and syntheses of highly stable mesoporous porphyrinic zirconium metal-organic frameworks with high surface area

    SciTech Connect (OSTI)

    Liu, Tian -Fu; Feng, Dawei; Chen, Ying -Pin; Zou, Lanfang; Bosch, Mathieu; Yuan, Shuai; Wei, Zhangwen; Fordham, Stephen; Wang, Kecheng; Zhou, Hong -Cai

    2015-01-14

    Through a topology-guided strategy, a series of Zr₆-containing isoreticular porphyrinic metal–organic frameworks (MOFs), PCN-228, PCN-229, and PCN-230, with ftw-a topology were synthesized using the extended porphyrinic linkers. The bulky porphyrin ring ligand effectively prevents the network interpenetration which often appears in MOFs with increased linker length. The pore apertures of the structures range from 2.5 to 3.8 nm, and PCN-229 demonstrates the highest porosity and BET surface area among the previously reported Zr-MOFs. Additionally, by changing the relative direction of the terminal phenyl rings, this series replaces a Zr₈ cluster with a smaller Zr₆ cluster in a topologically identical framework. The high connectivity of the Zr₆ cluster yields frameworks with enhanced stability despite high porosity and ultralarge linker. As a representative example, PCN-230, constructed with the most extended porphyrinic linker, shows excellent stability in aqueous solutions with pH values ranging from 0 to 12 and demonstrates one of the highest pH tolerances among all porphyrinic MOFs. This work not only presents a successful example of rational design of MOFs with desired topology, but also provides a strategy for construction of stable mesoporous MOFs.

  5. LEACHING OF SLAG FROM STEEL RECYCLING: RADIONUCLIDES AND STABLE ELEMENTS. DATA REPORT, JAN.15, 1997, REVISED SEPT.9, 1997

    SciTech Connect (OSTI)

    FUHRMANN,M.SCHOONEN,M.

    2003-07-31

    Of primary importance to this study are releases of radionuclides from slags. However, releases of other constituents also provide valuable information on releases of elements that may be toxic (e.g. Cr) or that may be used as analogs for radionuclides (e.g. K for Cs). In addition, leaching of bulk constituents from the slag gives information on weathering rates of the bulk material that can be used to estimate releases of non-leachable elements. Consequently, we have examined leaching of: radionuclides from those sloags that contain them; bulk elemental constituents of the slags; anionic constituents; trace elements, through spot checks of concentrations in leachates. Analysis by ICP of elemental constituents in leachates from radioactive samples was limited to those leachate samples that contained no detectable radionuclides, to avoid contamination of the ICP. In this data report we present leaching results for five slags that were produced by recycling steel. Two of the slags were generated at facilities that treat radioactively contaminated scrap, consequently the slag contains radionuclides. The slag from the other three was not contaminated. Because of this, we were able to examine the chemical composition of the slag and of the leachate generated during tests of these slags. For these materials we believe that leach rates of the stable elements can be used as analogs for radionuclides if the same steel processing method were used for radioactive material.

  6. Computational Design of Metal-Organic Frameworks Based on Stable Zirconium Building Units for Storage and Delivery of Methane

    SciTech Connect (OSTI)

    Gomez-Gualdron, DA; Gutov, OV; Krungleviciute, V; Borah, B; Mondloch, JE; Hupp, JT; Yildirim, T; Farha, OK; Snurr, RQ

    2014-10-14

    A metal organic framework (MOF) with high volumetric deliverable capacity for methane was synthesized after being identified by computational screening of 204 hypothetical MOF structures featuring (Zr6O4)(OH)(4)(CO2)(n) inorganic building blocks. The predicted MOF (NU-800) has an fcu topology in which zirconium nodes are connected via ditopic 1,4-benzenedipropynoic acid linkers. Based on our computer simulations, alkyne groups adjacent to the inorganic zirconium nodes provide more efficient methane packing around the nodes at high pressures. The high predicted gas uptake properties of this new MOF were confirmed by high-pressure isotherm measurements over a large temperature and pressure range. The measured methane deliverable capacity of NU-800 between 65 and 5.8 bar is 167 cc(STP)/cc (0.215 g/g), the highest among zirconium-based MOFs. High-pressure uptake values of H-2 and CO2 are also among the highest reported. These high gas uptake characteristics, along with the expected highly stable structure of NU-800, make it a promising material for gas storage applications.

  7. Research on stable, high-efficiency amorphous silicon multijunction modules. Annual subcontract report, 1 December 1991--31 October 1992

    SciTech Connect (OSTI)

    Ghosh, M.; DelCueto, J.: Kampas, F.; Xi, J.

    1993-02-01

    This report describes results from the first phase of a three-phase contract for the development of stable, high-efficiency, same-band-gap, amorphous silicon (a-Si) multijunction photovoltaic (PV) modules. The program involved improving the properties of individual layers of semiconductor and non-semiconductor materials and small-area single-junction and multijunction devices, as well as the multijunction modules. The semiconductor materials research was performed on a-Si p, i, and n layers, and on microcrystalline silicon n layers. These were deposited using plasma-enhanced chemical vapor deposition. The non-semiconductor materials studied were tin oxide, for use as a transparent-conducting-oxide (TCO), and zinc oxide, for use as a back reflector and as a buffer layer between the TCO and the semiconductor layers. Tin oxide was deposited using atmospheric-pressure chemical vapor deposition. Zinc oxide was deposited using magnetron sputtering. The research indicated that the major challenge in the fabrication of a-Si multijunction PV modules is the contact between the two p-i-n cells. A structure that has low optical absorption but that also facilitates the recombination of electrons from the first p-i-n structure with holes from the second p-i-n structure is required. Non-semiconductor layers and a-Si semiconductor layers were tested without achieving the desired result.

  8. Mechanically stable, high-aspect-ratio, multifilar, wound, ribbon-type conductor and method for manufacturing same

    DOE Patents [OSTI]

    Cottingham, J.G.

    1982-03-15

    A mechanically stable, wound, multifilar, ribbon-type conductor is described having a cross-sectional aspect ratio which may be greater than 12:1, comprising a plurality of conductive strands wound to form a flattened helix containing a plastic strip into which the strands have been pressed so as to form a bond between the strip and the strands. The bond mechanically stabilizes the conductor under tension, preventing it from collapsing into a tubular configuration. In preferred embodiments the plastic strip may be polytetrafluoroethylene, and the conductive strands may be formed from a superconductive material. Conductors in accordance with the present invention may be manufactured by winding a plurality of conductive strands around a hollow mandrel; the cross-section of a hollow mandrel; the cross-section of the mandrel continuously varying from substnatially circular to a high aspect ratio elipse while maintaining a constant circumference. The wound conductive strands are drawn from the mandrel as a multifilar helix while simultaneously a plastic strip is fed through the hollow mandrel so that it is contained within the helix as it is withdrawn from the mandrel. The helical conductor is then compressed into a ribbon-like form and the strands are bonded to the plastic strip by a combination of heat and pressure.

  9. Low-lying dipole response in the stable {sup 40,48}Ca nuclei within the second random-phase approximation

    SciTech Connect (OSTI)

    Gambacurta, D.; Grasso, M.; Catara, F.

    2012-10-20

    The low-lying dipole strength distributions of {sup 40}CaCa and {sup 48}Ca, in the energy region between 5 and 10 MeV, are studied within the second random phase approximation (RPA) with Skyrme interaction. Standard RPA models do not usually predict any presence of strength in this energy region, while experimentally a significant amount of strength is found. The inclusion of the 2 particle -2 hole configurations allows to obtain a description in a rather good agreement with the experimental data. The properties of the most collective state are analyzed in terms of its 1 particle -1 hole nature and its transition densities.

  10. COMPCOAL{trademark}: A profitable process for production of a stable high-Btu fuel from Powder River Basin coal

    SciTech Connect (OSTI)

    Smith, V.E.; Merriam, N.W.

    1994-10-01

    Western Research Institute (WRI) is developing a process to produce a stable, clean-burning, premium fuel from Powder River Basin (PRB) coal and other low-rank coals. This process is designed to overcome the problems of spontaneous combustion, dust formation, and readsorption of moisture that are experienced with PRB coal and with processed PRB coal. This process, called COMPCOAL{trademark}, results in high-Btu product that is intended for burning in boilers designed for midwestern coals or for blending with other coals. In the COMPCOAL process, sized coal is dried to zero moisture content and additional oxygen is removed from the coal by partial decarboxylation as the coal is contacted by a stream of hot fluidizing gas in the dryer. The hot, dried coal particles flow into the pyrolyzer where they are contacted by a very small flow of air. The oxygen in the air reacts with active sites on the surface of the coal particles causing the temperature of the coal to be raised to about 700{degrees}F (371{degrees}C) and oxidizing the most reactive sites on the particles. This ``instant aging`` contributes to the stability of the product while only reducing the heating value of the product by about 50 Btu/lb. Less than 1 scf of air per pound of dried coal is used to avoid removing any of the condensible liquid or vapors from the coal particles. The pyrolyzed coal particles are mixed with fines from the dryer cyclone and dust filter and the resulting mixture at about 600{degrees}F (316{degrees}C) is fed into a briquettor. Briquettes are cooled to about 250{degrees}F (121{degrees}C) by contact with a mist of water in a gas-tight mixing conveyor. The cooled briquettes are transferred to a storage bin where they are accumulated for shipment.

  11. Microbial food web mapping: linking carbon cycling and community structure in soils through pyrosequencing enabled stable isotope probing

    SciTech Connect (OSTI)

    Buckley, Daniel H.

    2015-03-15

    Soil represents a massive reservoir of active carbon and climate models vary dramatically in predicting how this carbon will respond to climate change over the coming century. A major cause of uncertainty is that we still have a very limited understand the microorganisms that dominate the soil carbon cycle. The vast majority of soil microbes cannot be cultivated in the laboratory and the diversity of organisms and enzymes that participate in the carbon cycle is staggeringly complex. We have developed a new toolbox for exploring the carbon cycle and the metabolic and ecological characteristics of uncultivated microorganisms. The high-resolution nucleic acid stable isotope probing approach that we have developed makes it possible to characterize microbial carbon cycling dynamics in soil. The approach allows us to track multiple 13C-labeled substrates into thousands of microbial taxa over time. Using this approach we have discovered several major lineages of uncultivated microorganisms that participate in cellulose metabolism and are found widely in soils (including Verrucomicrobia and Chloroflexi, which have not previously been implicated as major players in the soil carbon cycle). Furthermore, isotopic labelling of nucleic acids enables community genomics and permits genome fragment binning for a majority of these cellulolytic microorganisms allowing us to explore the metabolic underpinnings of cellulose degradation. This approach has allowed us to describe unexpected dynamics of carbon metabolism with different microbial taxa exhibiting characteristic patterns of carbon substrate incorporation, indicative of distinct ecological strategies. The data we describe allows us to characterize the activity of novel microorganisms as they occur in the environment and these data provide a basis for understanding how the physiological traits of discrete microorganisms sum to govern the complex responses of the soil carbon cycle.

  12. Gene expression analysis of precision-cut human liver slices indicates stable expression of ADME-Tox related genes

    SciTech Connect (OSTI)

    Elferink, M.G.L., E-mail: m.g.l.elferink@rug.nl [Department of Pharmacokinetics, Toxicology and Targeting, Groningen Research Institute for Pharmacy, University of Groningen (Netherlands); Olinga, P. [Department of Pharmacokinetics, Toxicology and Targeting, Groningen Research Institute for Pharmacy, University of Groningen (Netherlands); van Leeuwen, E.M.; Bauerschmidt, S.; Polman, J. [Molecular Design and Informatics, MSD, Oss (Netherlands); Schoonen, W.G. [Toxicology and Drug Disposition, MSD, Oss (Netherlands); Heisterkamp, S.H. [Biostatistics and Research Decision Sciences MSD, Oss (Netherlands); Bioinformatics Centre, University of Groningen (Netherlands); Groothuis, G.M.M. [Department of Pharmacokinetics, Toxicology and Targeting, Groningen Research Institute for Pharmacy, University of Groningen (Netherlands)

    2011-05-15

    In the process of drug development it is of high importance to test the safety of new drugs with predictive value for human toxicity. A promising approach of toxicity testing is based on shifts in gene expression profiling of the liver. Toxicity screening based on animal liver cells cannot be directly extrapolated to humans due to species differences. The aim of this study was to evaluate precision-cut human liver slices as in vitro method for the prediction of human specific toxicity by toxicogenomics. The liver slices contain all cell types of the liver in their natural architecture. This is important since drug-induced toxicity often is a multi-cellular process. Previously we showed that toxicogenomic analysis of rat liver slices is highly predictive for rat in vivo toxicity. In this study we investigated the levels of gene expression during incubation up to 24 h with Affymetrix microarray technology. The analysis was focused on a broad spectrum of genes related to stress and toxicity, and on genes encoding for phase-I, -II and -III metabolizing enzymes and transporters. Observed changes in gene expression were associated with cytoskeleton remodeling, extracellular matrix and cell adhesion, but for the ADME-Tox related genes only minor changes were observed. PCA analysis showed that changes in gene expression were not associated with age, sex or source of the human livers. Slices treated with acetaminophen showed patterns of gene expression related to its toxicity. These results indicate that precision-cut human liver slices are relatively stable during 24 h of incubation and represent a valuable model for human in vitro hepatotoxicity testing despite the human inter-individual variability.

  13. Old and stable soil organic matter is not necessarily chemically recalcitrant: Implications for modeling concepts and temperature sensitivity

    SciTech Connect (OSTI)

    Kleber, M.; Nico, P.S.; Plante, A.; Filley, T.; Kramer, M.; Swanston, C.; Sollins, P.

    2010-03-01

    Soil carbon turnover models generally divide soil carbon into pools with varying intrinsic decomposition rates. Although these decomposition rates are modified by factors such as temperature, texture, and moisture, they are rationalized by assuming chemical structure is a primary controller of decomposition. In the current work, we use near edge X-ray absorption fine structure (NEXAFS) spectroscopy in combination with differential scanning calorimetry (DSC) and alkaline cupric oxide (CuO) oxidation to explore this assumption. Specifically, we examined material from the 2.3-2.6 kg L{sup -1} density fraction of three soils of different type (Oxisol, Alfisol, Inceptisol). The density fraction with the youngest {sup 14}C age (Oxisol, 107 years) showed the highest relative abundance of aromatic groups and the lowest O-alkyl C/aromatic C ratio as determined by NEXAFS. Conversely, the fraction with the oldest C (Inceptisol, 680 years) had the lowest relative abundance of aromatic groups and highest O-alkyl C/aromatic C ratio. This sample also had the highest proportion of thermally labile materials as measured by DSC, and the highest ratio of substituted fatty acids to lignin phenols as indicated by CuO oxidation. Therefore, the organic matter of the Inceptisol sample, with a {sup 14}C age associated with 'passive' pools of carbon (680 years), had the largest proportion of easily metabolizable organic molecules with low thermodynamic stability, whereas the organic matter of the much younger Oxisol sample (107 years) had the highest proportion of supposedly stable organic structures considered more difficult to metabolize. Our results demonstrate that C age is not necessarily related to molecular structure or thermodynamic stability, and we suggest that soil carbon models would benefit from viewing turnover rate as codetermined by the interaction between substrates, microbial actors, and abiotic driving variables. Furthermore, assuming that old carbon is composed of complex or 'recalcitrant' compounds will erroneously attribute a greater temperature sensitivity to those materials than they may actually possess.

  14. Next-to-leading order transverse momentum-weighted Sivers asymmetry in semi-inclusive deep inelastic scattering: The role of the three-gluon correlator

    SciTech Connect (OSTI)

    Dai, Ling -Yun; Kang, Zhong -Bo; Prokudin, Alexei; Vitev, Ivan

    2015-12-22

    Here, we study the Sivers asymmetry in semi-inclusive hadron production in deep inelastic scattering. We concentrate on the contribution from the photon-gluon fusion channel at O(αem2αs), where three-gluon correlation functions play a major role within the twist-3 collinear factorization formalism. We establish the correspondence between such a formalism with three-gluon correlation functions and the usual transverse momentum-dependent (TMD) factorization formalism at moderate hadron transverse momenta. We derive the coefficient functions used in the usual TMD evolution formalism related to the quark Sivers function expansion in terms of the three-gluon correlation functions. We further perform the next-to-leading order calculation for the transverse momentum-weighted spin-dependent differential cross section and identify the off-diagonal contribution from the three-gluon correlation functions to the QCD collinear evolution of the twist-3 Qiu-Sterman function.

  15. Measurement of the parity-violating asymmetry in inclusive electroproduction of ?- near the Delta0 resonance

    SciTech Connect (OSTI)

    Androic, D.; Armstrong, D. S.; Bailey, S. L.; Beck, D. H.; Beise, E. J.; Benesch, J.; Benmokhtar, F.; Bimbot, L.; Birchall, J.; Bosted, P.; Breuer, H.; Capuano, C. L.; Chao, Y. -C.; Coppens, A.; Davis, C. A.; Ellis, C.; Flores, G.; Franklin, G.; Furget, C.; Gaskell, D.; Gericke, T. W.; Grames, J.; Guillard, G.; Hansknecht, J.; Horn, T.; Jones, M. K.; King, P. M.; Korsch, W.; Kox, S.; Lee, L.; Liu, J.; Lung, A.; Mammei, J.; Martin, J. W.; McKeown, R. D.; Micherdzinska, A.; Mihovilovic, M.; Mkrtchyan, H.; Muether, M.; Page, S. A.; Papvassiliou, V.; Pate, S. F.; Phillips, S. K.; Pillot, P.; Pitt, M. L.; Poelker, M.; Quinn, B.; Ramsay, W. D.; Real, J. -S.; Roche, J.; Roos, P.; Schaub, J.; Seva, T.; Simicevic, N.; Smith, G. R.; Spayde, D. T.; Stutzman, M.; Suleiman, R.; Tadevosyan, V.; van Oers, W. T.H.; Versteegen, M.

    2012-03-20

    The parity-violating (PV) asymmetry of inclusive ?- production in electron scattering from a liquid deuterium target was measured at backward angles. The measurement was conducted as a part of the G0 experiment, at a beam energy of 360 MeV. The physics process dominating pion production for these kinematics is quasi-free photoproduction off the neutron via the ?0 resonance. In the context of heavy-baryon chiral perturbation theory (HB?PT), this asymmetry is related to a low energy constant d?- that characterizes the parity-violating ?N? coupling. Zhu et al. calculated d?- in a model benchmarked by the large asymmetries seen in hyperon weak radiative decays, and predicted potentially large asymmetries for this process, ranging from A?- = -5.2 to +5.2 ppm. The measurement performed in this work leads to A?- = -0.36 1.06 0.37 0.03 ppm (where sources of statistical, systematic and theoretical uncertainties are included), which would disfavor enchancements considered by Zhu et al. proportional to Vud/Vus. The measurement is part of a program of inelastic scattering measurements that were conducted by the G0 experiment, seeking to determine the N-? axial transition form-factors using PV electron scattering.

  16. Sensitivity of global-scale climate change attribution results to inclusion of fossil fuel black carbon aerosol - article no. L14701

    SciTech Connect (OSTI)

    Jones, G.S.; Jones, A.; Roberts, D.L.; Stott, P.A.; Williams, K.D.

    2005-07-16

    It is likely that greenhouse gas emissions caused most of the global mean warming observed during the 20th century, and that sulphate aerosols counteracted this warming to some extent, by reflecting solar radiation to space and thereby cooling the planet. However, the importance of another aerosol, namely black carbon, could be underestimated. Here we include fossil fuel black carbon aerosol in a detection and attribution analysis with greenhouse gas and sulphate aerosols. We find that most of the warming of the 20th Century is attributable to changes in greenhouse gases offset by net aerosol cooling. However the pattern of temperature change due to black carbon is currently indistinguishable from the sulphate aerosol pattern of temperature change. The attribution of temperature change due to greenhouse gases is not sensitive to the inclusion of black carbon. We can be confident about the overall attribution of total aerosols, but less so about the contributions of black carbon emissions to 20th century climate change. This work presents no evidence that black carbon aerosol forcing outweighed the cooling due to sulphate aerosol.

  17. Next-to-leading order transverse momentum-weighted Sivers asymmetry in semi-inclusive deep inelastic scattering: The role of the three-gluon correlator

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dai, Ling -Yun; Kang, Zhong -Bo; Prokudin, Alexei; Vitev, Ivan

    2015-12-22

    Here, we study the Sivers asymmetry in semi-inclusive hadron production in deep inelastic scattering. We concentrate on the contribution from the photon-gluon fusion channel at O(αem2αs), where three-gluon correlation functions play a major role within the twist-3 collinear factorization formalism. We establish the correspondence between such a formalism with three-gluon correlation functions and the usual transverse momentum-dependent (TMD) factorization formalism at moderate hadron transverse momenta. We derive the coefficient functions used in the usual TMD evolution formalism related to the quark Sivers function expansion in terms of the three-gluon correlation functions. We further perform the next-to-leading order calculation for themore » transverse momentum-weighted spin-dependent differential cross section and identify the off-diagonal contribution from the three-gluon correlation functions to the QCD collinear evolution of the twist-3 Qiu-Sterman function.« less

  18. Inclusive and differential measurements of the $\\mathrm{ t \\bar{t} }$ charge asymmetry in pp collisions at $\\sqrt{s} =$ 8 TeV

    SciTech Connect (OSTI)

    Khachatryan, Vardan

    2015-07-14

    The tt charge asymmetry is measured in proton-proton collisions at a centre-of-mass energy of 8 TeV. The data, collected with the CMS experiment at the LHC, correspond to an integrated luminosity of 19.7 fb-1 . Selected events contain an electron or a muon and four or more jets, where at least one jet is identified as originating from b-quark hadronization. The inclusive charge asymmetry is found to be 0.0010 0.0068 (stat) 0.0037 (syst). In addition, differential charge asymmetries as a function of rapidity, transverse momentum, and invariant mass of the tt system are studied. For the first time at the LHC, our measurements are also performed in a reduced fiducial phase space of top quark pair production, with an integrated result of -0.0035 0.0072 (stat) 0.0031 (syst). Additionally, all measurements are consistent within two standard deviations with zero asymmetry as well as with the predictions of the standard model.

  19. Study of jet shapes in inclusive jet production in pp collisions at √s=7 TeV using the ATLAS detector

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aad, G.; Abbott, B.; Abdallah, J.; Abdelalim, A. A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; Abramowicz, H.; Abreu, H.; et al

    2011-03-08

    Jet shapes have been measured in inclusive jet production in proton-proton collisions at s√=7  TeV using 3  pb⁻¹ of data recorded by the ATLAS experiment at the LHC. Jets are reconstructed using the anti-kt algorithm with transverse momentum 30  GeVT<600  GeV and rapidity in the region |y|<2.8. The data are corrected for detector effects and compared to several leading-order QCD matrix elements plus parton shower Monte Carlo predictions, including different sets of parameters tuned to model fragmentation processes and underlying event contributions in the final state. The measured jets become narrower with increasing jet transverse momentum and the jet shapes present a moderate jetmore » rapidity dependence. Within QCD, the data test a variety of perturbative and nonperturbative effects. In particular, the data show sensitivity to the details of the parton shower, fragmentation, and underlying event models in the Monte Carlo generators. For an appropriate choice of the parameters used in these models, the data are well described.« less

  20. Polarization of Lambda0 and anti-Lambda0 inclusively produced by 610-GeV/c Sigma- and 525-GeV/c proton beams

    SciTech Connect (OSTI)

    Sanchez-Lopez, J.L.; Nelson, K.D.; Engelfried, J.; Akgun, U.; Alkhazov, G.; Amaro-Reyes, J.; Atamantchouk, A.G.; Ayan, A.S.; Balatz, M.Y.; Blanco-Covarrubias, A.; Bondar, N.F.; /Ball State U. /Bogazici U. /Carnegie Mellon U. /Rio de Janeiro, CBPF /Fermilab /Serpukhov, IHEP /Beijing, Inst. High Energy Phys. /Moscow, ITEP /Heidelberg, Max Planck Inst. /Moscow State U. /St. Petersburg, INP

    2007-06-01

    We have measured the polarization of {Lambda}{sup 0} and {bar {Lambda}{sup 0}} inclusively produced by 610 GeV/c {Sigma}{sup -} and 525 GeV/c proton beams in the experiment SELEX during the 1996/7 fixed target run at Fermilab. The polarization was measured as a function of the {Lambda} longitudinal momentum fraction x{sub F} and transverse momentum p{sub t}. For the {Lambda}{sup 0} produced by {Sigma}{sup -} the polarization is increasing with x{sub F} , from slightly negative at x{sub F} {approx} 0 to about 15% at large x{sub F} ; it shows a non-monotonic behavior as a function of p{sub t}. For the proton beam, the {Lambda}{sup 0} polarization is negative and decreasing as a function of x{sub F} and p{sub t}. The {bar {Lambda}{sup 0}} polarization is compatible with 0 for both beam particles over the full kinematic range. The target dependence was examined but no statistically significant difference was found.

  1. Evolution of stable and metastable phases and coercivity in rare-earth-rich alloys of the Fe-Nd and Fe-Pr systems

    SciTech Connect (OSTI)

    Cabral, F.A.O. ); Gama, S. )

    1990-09-01

    The authors have studied eutectic alloys of the Fe-Nd and Fe-Pr systems regarding their magnetic behavior in the as-cast state and heat-treated at 600 C for different periods. In both systems the initial precipitation of a metastable phase is observed. This phase transforms into Fe{sub 17}Nd{sub 2} and this finally into a second phase with Fe{sub 17}Nd{sub 5} stoichiometry that is stable. For the Fe-Pr system the precipitation of two metastable phases that transform into the stable Fe{sub 17}Pr{sub 2} is observed. The authors have also measured the influence of these transformations on the coercivity of these alloys.

  2. The plasma centrifuge: A compact, low cost, stable isotope separator. Phase 2 final technical report, September 15, 1991--September 14, 1995

    SciTech Connect (OSTI)

    Guss, W.

    1996-09-05

    Enriched stable isotopes are required for production of radionuclides as well as for research and diagnostic uses. Science Research Laboratory (SRL) has developed a plasma centrifuge for moderate throughput of enriched stable isotopes, such as {sup 13}C, {sup 17}O, {sup 18}O, and {sup 203}Tl, for medical as well as other applications. Dwindling isotope stocks have restricted the use of enriched isotopes and their associated labeled organic molecules in medical imaging to very few research facilities because of high costs of isotope separation. With the introduction of the plasma centrifuge separator, the cost per separated gram of even rarely occurring isotopes ({le} 1% natural abundance) is potentially many times lower than with other separation technologies (cryogenic distillation and calutrons). The centrifuge is a simple, robust, pulsed electrical discharge device that has successfully demonstrated isotope separation of small (mg) quantities of {sup 26}Mg. Based on the results of the Phase 2 program, modest enhancements to the power supplies and cooling systems, a centrifuge separator will have high repetition rate (60 pps) and high duty cycle (60%) to produce in one month kilogram quantities of highly enriched stable isotopes. The centrifuge may be used in stand-alone operation or could be used as a high-throughput pre-separation stage with calutrons providing the final separation.

  3. A synchrotron X-ray diffraction study of the local residual strains around a single inclusion in an Al/W metal-matrix composite

    SciTech Connect (OSTI)

    Poulsen, H.F.; Lorentzen, T.; Feidenhans`l, R.; Liu, Y.L.

    1997-01-01

    An X-ray technique for local measurements of the internal residual stress near inclusions in metal-matrix composites (MMCs) is presented. The technique utilizes medium- to high-energy monochromatic X-rays from a synchrotron source and a combination of slits on the entry and exit sides of the sample in order to determine the strains from small volumes deep within the composite sample. The strains of the individual matrix grains are sampled and averaged, allowing for a much improved spatial resolution. An analyzer is used in order to avoid well-known systematic errors related to geometry and stability of the beam. First results are obtained on a model system consisting of a 500 {micro}m continuous W fiber imbedded in an Al matrix. Two specimens were investigated with typical Al grain sizes of 1 mm and 30 {micro}m. With a gage volume of 10 x 10 x 170 {micro}m{sup 3}, the authors obtained count rates on the order of 5,000 cps and an accuracy in the strain measurements of {Delta}{var_epsilon} {le} 5 {times} 10{sup {minus}5}. For both specimens, the authors found no variations of the radial and transverse strain components with the distance to the fiber, indicating either a complete debonding of the system, a very weak interface, or interface deterioration due to chemical reaction. Intragranular strain fluctuations on the order of {var_epsilon} = {+-}10{sup {minus}4} were found to build up close to the grain boundaries. For the specimen with the smaller Al grain size, sampling data from approximately 15 grains at the same distance to the fiber was sufficient for averaging out the intergranular fluctuations. Finally, the authors observe effects from the conventional metallurgic sample preparation up to 400 {micro}m from the surface, emphasizing the relevance of bulk techniques.

  4. Single spin asymmetries of inclusive hadrons produced in electron scattering from a transversely polarized 3 He target

    SciTech Connect (OSTI)

    Allada, K.; Zhao, Y. X.; Aniol, K.; Annand, J. R. M.; Averett, T.; Benmokhtar, F.; Bertozzi, W.; Bradshaw, P. C.; Bosted, P.; Camsonne, A.; Canan, M.; Cates, G. D.; Chen, C.; Chen, J. -P.; Chen, W.; Chirapatpimol, K.; Chudakov, E.; Cisbani, E.; Cornejo, J. C.; Cusanno, F.; Dalton, M.; Deconinck, W.; de Jager, C. W.; De Leo, R.; Deng, X.; Deur, A.; Ding, H.; Dolph, P. A. M.; Dutta, C.; Dutta, D.; Fassi, L. El; Frullani, S.; Gao, H.; Garibaldi, F.; Gaskell, D.; Gilad, S.; Gilman, R.; Glamazdin, O.; Golge, S.; Guo, L.; Hamilton, D.; Hansen, O.; Higinbotham, D. W.; Holmstrom, T.; Huang, J.; Huang, M.; Ibrahim, H. F.; Iodice, M.; Jiang, X.; Jin, G.; Jones, M. K.; Katich, J.; Kelleher, A.; Kim, W.; Kolarkar, A.; Korsch, W.; LeRose, J. J.; Li, X.; Li, Y.; Lindgren, R.; Liyanage, N.; Long, E.; Lu, H. -J.; Margaziotis, D. J.; Markowitz, P.; Marrone, S.; McNulty, D.; Meziani, Z. -E.; Michaels, R.; Moffit, B.; Camacho, C. Muñoz; Nanda, S.; Narayan, A.; Nelyubin, V.; Norum, B.; Oh, Y.; Osipenko, M.; Parno, D.; Peng, J. -C.; Phillips, S. K.; Posik, M.; Puckett, A. J. R.; Qian, X.; Qiang, Y.; Rakhman, A.; Ransome, R.; Riordan, S.; Saha, A.; Sawatzky, B.; Schulte, E.; Shahinyan, A.; Shabestari, M. H.; Širca, S.; Stepanyan, S.; Subedi, R.; Sulkosky, V.; Tang, L. -G.; Tobias, A.; Urciuoli, G. M.; Vilardi, I.; Wang, K.; Wang, Y.; Wojtsekhowski, B.; Yan, X.; Yao, H.; Ye, Y.; Ye, Z.; Yuan, L.; Zhan, X.; Zhang, Y.; Zhang, Y. -W.; Zhao, B.; Zheng, X.; Zhu, L.; Zhu, X.; Zong, X.

    2014-04-07

    We report the first measurement of target single-spin asymmetries (AN) in the inclusive hadron production reaction, e + 3He↑→h+X, using a transversely polarized 3 He target. This experiment was conducted at Jefferson Lab in Hall A using a 5.9-GeV electron beam. Three types of hadrons (π±, K± and proton) were detected in the transverse hadron momentum range 0.54 < pT < 0.74 GeV/c. The range of xF for pions was -0.29 < xF< -0.23 and for kaons -0.25 < xF<-0.18. The observed asymmetry strongly depends on the type of hadron. A positive asymmetry is observed for π+ and K+. A negative asymmetry is observed for π–. The magnitudes of the asymmetries follow |Aπ |<|Aπ +|<|AK +|. The K and proton asymmetries are consistent with zero within the experimental uncertainties. The π+ and π asymmetries measured for the 3He target and extracted for neutrons are opposite in sign with a small increase observed as a function of pT.

  5. Measurement of Single Spin Asymmetries in Semi-Inclusive Deep Inelastic Scattering Reaction n? ( e,e' pi{sup +}) X at Jefferson Lab

    SciTech Connect (OSTI)

    Kalyan Allada

    2010-06-01

    What constitutes the spin of the nucleon? The answer to this question is still not completely understood. Although we know the longitudinal quark spin content very well, the data on the transverse quark spin content of the nucleon is still very sparse. Semi-inclusive Deep Inelastic Scattering (SIDIS) using transversely polarized targets provide crucial information on this aspect. The data that is currently available was taken with proton and deuteron targets. The E06-010 experiment was performed at Jefferson Lab in Hall-A to measure the single spin asymmetries in the SIDIS reaction n?(e, e??{sup }/K{sup })X using transversely polarized {sup 3}He target. The experiment used the continuous electron beam provided by the CEBAF accelerator with a beam energy of 5.9 GeV. Hadrons were detected in a high-resolution spectrometer in coincidence with the scattered electrons detected by the BigBite spectrometer. The kinematic coverage focuses on the valence quark region, x = 0.19 to 0.34, at Q{sup 2} = 1.77 to 2.73 (GeV/c){sup 2}. This is the first measurement on a neutron target. The data from this experiment, when combined with the world data on the proton and the deuteron, will provide constraints on the transversity and Sivers distribution functions on both the u and d-quarks in the valence region. In this work we report on the single spin asymmetries in the SIDIS n?(e, e??{sup +})X reaction.

  6. A CRITICAL EXAMINATION OF THE X-WIND MODEL FOR CHONDRULE AND CALCIUM-RICH, ALUMINUM-RICH INCLUSION FORMATION AND RADIONUCLIDE PRODUCTION

    SciTech Connect (OSTI)

    Desch, S. J.; Morris, M. A.; Connolly, H. C.; Boss, Alan P.

    2010-12-10

    Meteoritic data, especially regarding chondrules and calcium-rich, aluminum-rich inclusions (CAIs), and isotopic evidence for short-lived radionuclides (SLRs) in the solar nebula, potentially can constrain how planetary systems form. Interpretation of these data demands an astrophysical model, and the 'X-wind' model of Shu et al. and collaborators has been advanced to explain the origin of chondrules, CAIs, and SLRs. It posits that chondrules and CAIs were thermally processed <0.1 AU from the protostar, then flung by a magnetocentrifugal outflow to the 2-3 AU region to be incorporated into chondrites. Here we critically examine key assumptions and predictions of the X-wind model. We find a number of internal inconsistencies: theory and observation show no solid material exists at 0.1 AU; particles at 0.1 AU cannot escape being accreted into the star; particles at 0.1 AU will collide at speeds high enough to destroy them; thermal sputtering will prevent growth of particles; and launching of particles in magnetocentrifugal outflows is not modeled, and may not be possible. We also identify a number of incorrect predictions of the X-wind model: the oxygen fugacity where CAIs form is orders of magnitude too oxidizing, chondrule cooling rates are orders of magnitude lower than those experienced by barred olivine chondrules, chondrule-matrix complementarity is not predicted, and the SLRs are not produced in their observed proportions. We conclude that the X-wind model is not relevant to chondrule and CAI formation and SLR production. We discuss more plausible models for chondrule and CAI formation and SLR production.

  7. Semi-inclusive charged-pion electroproduction off protons and deuterons: Cross sections, ratios, and access to the quark-parton model at low energies

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Asaturyan, R.; Ent, R.; Mkrtchyan, H.; Navasardyan, T.; Tadevosyan, V.; Adams, G. S.; Ahmidouch, A.; Angelescu, T.; Arrington, J.; Asaturyan, A.; et al

    2012-01-01

    A large set of cross sections for semi-inclusive electroproduction of charged pions (π±) from both proton and deuteron targets was measured. The data are in the deep-inelastic scattering region with invariant mass squared W2 > 4 GeV2 and range in four-momentum transfer squared 2 < Q2 < 4 (GeV/c)2, and cover a range in the Bjorken scaling variable 0.2 < x < 0.6. The fractional energy of the pions spans a range 0.3 < z < 1, with small transverse momenta with respect to the virtual-photon direction, Pt2 < 0.2 (GeV/c)2. The invariant mass that goes undetected, Mx or W',more » is in the nucleon resonance region, W' < 2 GeV. The new data conclusively show the onset of quark-hadron duality in this process, and the relation of this phenomenon to the high-energy factorization ansatz of electron-quark scattering and subsequent quark → pion production mechanisms. The x, z and Pt2 dependences of several ratios (the ratios of favored-unfavored fragmentation functions, charged pion ratios, deuteron-hydrogen and aluminum-deuteron ratios for π+ and π-) have been studied. The ratios are found to be in good agreement with expectations based upon a high-energy quark-parton model description. We find the azimuthal dependences to be small, as compared to exclusive pion electroproduction, and consistent with theoretical expectations based on tree-level factorization in terms of transverse-momentum-dependent parton distribution and fragmentation functions. In the context of a simple model, the initial transverse momenta of d quarks are found to be slightly smaller than for u quarks, while the transverse momentum width of the favored fragmentation function is about the same as for the unfavored one, and both fragmentation widths are larger than the quark widths.« less

  8. Correlation between Pd metal thickness and thermally stable perpendicular magnetic anisotropy features in [Co/Pd]{sub n} multilayers at annealing temperatures up to 500 °C

    SciTech Connect (OSTI)

    An, Gwang Guk; Lee, Ja Bin; Yang, Seung Mo; Yoon, Kap Soo; Kim, Jae Hong; Chung, Woo Seong; Hong, Jin Pyo

    2015-02-15

    We examine highly stable perpendicular magnetic anisotropy (PMA) features of [Co/Pd]{sub 10} multilayers (MLs) versus Pd thickness at various ex-situ annealing temperatures. Thermally stable PMA characteristics were observed up to 500 °C, confirming the suitability of these systems for industrial applications at this temperature. Experimental observations suggest that the choice of equivalent Co and Pd layer thicknesses in a ML configuration ensures thermally stable PMA features, even at higher annealing temperatures. X-ray diffraction patterns and cross-sectional transmission electron microscopy images were obtained to determine thickness, post-annealing PMA behavior, and to explore the structural features that govern these findings.

  9. Semi-inclusive charged-pion electroproduction off protons and deuterons: Cross sections, ratios, and access to the quark-parton model at low energies

    SciTech Connect (OSTI)

    Asaturyan, R.; Ent, R.; Mkrtchyan, H.; Navasardyan, T.; Tadevosyan, V.; Adams, G. S.; Ahmidouch, A.; Angelescu, T.; Arrington, J.; Asaturyan, A.; Baker, O. K.; Benmouna, N.; Bertoncini, C.; Blok, H. P.; Boeglin, W. U.; Bosted, P. E.; Breuer, H.; Christy, M. E.; Connell, S. H.; Cui, Y.; Dalton, M. M.; Danagoulian, S.; Day, D.; Dunne, J. A.; Dutta, D.; El Khayari, N.; Fenker, H. C.; Frolov, V. V.; Gan, L.; Gaskell, D.; Hafidi, K.; Hinton, W.; Holt, R. J.; Horn, T.; Huber, G. M.; Hungerford, E.; Jiang, X.; Jones, M.; Joo, K.; Kalantarians, N.; Kelly, J. J.; Keppel, C. E.; Kubarovsky, V.; Li, Y.; Liang, Y.; Mack, D.; Malace, S. P.; Markowitz, P.; McGrath, E.; McKee, P.; Meekins, D. G.; Mkrtchyan, A.; Moziak, B.; Niculescu, G.; Niculescu, I.; Opper, A. K.; Ostapenko, T.; Reimer, P. E.; Reinhold, J.; Roche, J.; Rock, S. E.; Schulte, E.; Segbefia, E.; Smith, C.; Smith, G. R.; Stoler, P.; Tang, L.; Ungaro, M.; Uzzle, A.; Vidakovic, S.; Villano, A.; Vulcan, W. F.; Wang, M.; Warren, G.; Wesselmann, F. R.; Wojtsekhowski, B.; Wood, S. A.; Xu, C.; Yuan, L.; Zheng, X.

    2012-01-01

    A large set of cross sections for semi-inclusive electroproduction of charged pions (?) from both proton and deuteron targets was measured. The data are in the deep-inelastic scattering region with invariant mass squared W2 > 4 GeV2 and range in four-momentum transfer squared 2 < Q2 < 4 (GeV/c)2, and cover a range in the Bjorken scaling variable 0.2 < x < 0.6. The fractional energy of the pions spans a range 0.3 < z < 1, with small transverse momenta with respect to the virtual-photon direction, Pt2 < 0.2 (GeV/c)2. The invariant mass that goes undetected, Mx or W', is in the nucleon resonance region, W' < 2 GeV. The new data conclusively show the onset of quark-hadron duality in this process, and the relation of this phenomenon to the high-energy factorization ansatz of electron-quark scattering and subsequent quark ? pion production mechanisms. The x, z and Pt2 dependences of several ratios (the ratios of favored-unfavored fragmentation functions, charged pion ratios, deuteron-hydrogen and aluminum-deuteron ratios for ?+ and ?-) have been studied. The ratios are found to be in good agreement with expectations based upon a high-energy quark-parton model description. We find the azimuthal dependences to be small, as compared to exclusive pion electroproduction, and consistent with theoretical expectations based on tree-level factorization in terms of transverse-momentum-dependent parton distribution and fragmentation functions. In the context of a simple model, the initial transverse momenta of d quarks are found to be slightly smaller than for u quarks, while the transverse momentum width of the favored fragmentation function is about the same as for the unfavored one, and both fragmentation widths are larger than the quark widths.

  10. A method to synchronize signals from multiple patient monitoring devices through a single input channel for inclusion in list-mode acquisitions

    SciTech Connect (OSTI)

    OConnor, J. Michael; Pretorius, P. Hendrik; Johnson, Karen; King, Michael A.

    2013-12-15

    Purpose: This technical note documents a method that the authors developed for combining a signal to synchronize a patient-monitoring device with a second physiological signal for inclusion into list-mode acquisition. Our specific application requires synchronizing an external patient motion-tracking system with a medical imaging system by multiplexing the tracking input with the ECG input. The authors believe that their methodology can be adapted for use in a variety of medical imaging modalities including single photon emission computed tomography (SPECT) and positron emission tomography (PET). Methods: The authors insert a unique pulse sequence into a single physiological input channel. This sequence is then recorded in the list-mode acquisition along with the R-wave pulse used for ECG gating. The specific form of our pulse sequence allows for recognition of the time point being synchronized even when portions of the pulse sequence are lost due to collisions with R-wave pulses. This was achieved by altering our software used in binning the list-mode data to recognize even a portion of our pulse sequence. Limitations on heart rates at which our pulse sequence could be reliably detected were investigated by simulating the mixing of the two signals as a function of heart rate and time point during the cardiac cycle at which our pulse sequence is mixed with the cardiac signal. Results: The authors have successfully achieved accurate temporal synchronization of our motion-tracking system with acquisition of SPECT projections used in 17 recent clinical research cases. In our simulation analysis the authors determined that synchronization to enable compensation for body and respiratory motion could be achieved for heart rates up to 125 beats-per-minute (bpm). Conclusions: Synchronization of list-mode acquisition with external patient monitoring devices such as those employed in motion-tracking can reliably be achieved using a simple method that can be implemented using minimal external hardware and software modification through a single input channel, while still recording cardiac gating signals.

  11. Final Project Report: "??Exploratory Research: Mercury Stable Isotopes as Indicators of the Biogeochemical Cycling of Mercury"?

    SciTech Connect (OSTI)

    Johnson, Thomas M

    2012-08-01

    This is the final project report for award DE-SC0005351, which supported the research project "??Exploratory Research: Mercury Stable Isotopes as Indicators of the Biogeochemical Cycling of Mercury."? This exploratory project investigated the use of mercury (Hg) stable isotope measurements as a new approach to study how Hg moves and changes its chemical form in environmental systems, with particular focus on the East Fork of Poplar Creek (EFPC) near the DOE Y-12 plant (a Hg contamination source). This study developed analytical methods and collected pilot data that have set the stage for more detailed studies and have begun to provide insights into Hg movement and chemical changes. The overall Hg stable isotope approach was effective. The Hg isotope analysis methods yielded high-precision measurements of the sediment, water, and fish samples analyzed; quality control measures demonstrated the precision. The pilot data show that the 202Hg/198Hg, 199Hg/198Hg, and 201Hg/198Hg isotope ratios vary in this system. 202Hg/198Hg ratios of the Hg released from the Y-12 plant are relatively high, and those of the regional Hg background in soils and river sediments are significantly lower. Unfortunately, 202Hg/198Hg differences that might have been useful to distinguish early Hg releases from later releases were not observed. However, 202Hg/198Hg ratios in sediments do provide insights into chemical transformations that may occur as Hg moves through the system. Furthermore, 199Hg/198Hg and 201Hg/198Hg ratio analyses of fish tissues indicate that the effects of sunlight-driven chemical reactions on the Hg that eventually ends up in EFPC fish are measureable, but small. These results provide a starting point for a more detailed study (already begun at Univ. of Michigan) that will continue Hg isotope ratio work aimed at improving understanding of how Hg moves, changes chemically, and does or does not take on more highly toxic forms in the Oak Ridge area. This work also benefits efforts to trace Hg contamination in the Clinch and Tennessee Rivers, into which EFPC flows, and to distinguish Hg from the Y-12 plant from that released from a nearby coal ash accident.

  12. Measurement of “pretzelosity” asymmetry of charged pion production in semi-inclusive deep inelastic scattering on a polarized He3 target

    SciTech Connect (OSTI)

    Zhang, Y.; Qian, X.; Allada, K.; Dutta, C.; Huang, J.; Katich, J.; Wang, Y.; Aniol, K.; Annand, J. R. M.; Averett, T.; Benmokhtar, F.; Bertozzi, W.; Bradshaw, P. C.; Bosted, P.; Camsonne, A.; Canan, M.; Cates, G. D.; Chen, C.; Chen, J. -P.; Chen, W.; Chirapatpimol, K.; Chudakov, E.; Cisbani, E.; Cornejo, J. C.; Cusanno, F.; Dalton, M. M.; Deconinck, W.; de Jager, C. W.; De Leo, R.; Deng, X.; Deur, A.; Ding, H.; Dolph, P. A. M.; Dutta, D.; El Fassi, L.; Frullani, S.; Gao, H.; Garibaldi, F.; Gaskell, D.; Gilad, S.; Gilman, R.; Glamazdin, O.; Golge, S.; Guo, L.; Hamilton, D.; Hansen, O.; Higinbotham, D. W.; Holmstrom, T.; Huang, M.; Ibrahim, H. F.; Iodice, M.; Jiang, X.; Jin, G.; Jones, M. K.; Kelleher, A.; Kim, W.; Kolarkar, A.; Korsch, W.; LeRose, J. J.; Li, X.; Li, Y.; Lindgren, R.; Liyanage, N.; Long, E.; Lu, H. -J.; Margaziotis, D. J.; Markowitz, P.; Marrone, S.; McNulty, D.; Meziani, Z. -E.; Michaels, R.; Moffit, B.; Muñoz Camacho, C.; Nanda, S.; Narayan, A.; Nelyubin, V.; Norum, B.; Oh, Y.; Osipenko, M.; Parno, D.; Peng, J. C.; Phillips, S. K.; Posik, M.; Puckett, A. J. R.; Qiang, Y.; Rakhman, A.; Ransome, R. D.; Riordan, S.; Saha, A.; Sawatzky, B.; Schulte, E.; Shahinyan, A.; Shabestari, M. H.; Širca, S.; Stepanyan, S.; Subedi, R.; Sulkosky, V.; Tang, L. -G.; Tobias, W. A.; Urciuoli, G. M.; Vilardi, I.; Wang, K.; Wojtsekhowski, B.; Yan, X.; Yao, H.; Ye, Y.; Ye, Z.; Yuan, L.; Zhan, X.; Zhang, Y. -W.; Zhao, B.; Zheng, X.; Zhu, L.; Zhu, X.; Zong, X.

    2014-11-24

    An experiment to measure single-spin asymmetries in semi-inclusive production of charged pions in deep-inelastic scattering on a transversely polarized ³He target was performed at Jefferson Lab in the kinematic region of 0.16 < x < 0.35 and 1.4 < Q² < 2.7 GeV². Our results show that both π± on 3He and on neutron pretzelosity asymmetries are consistent with zero within experimental uncertainties.

  13. Proxy Records of the Indonesian Low and the El Ni{tilde n}o-Southern Oscillation (ENSO) from Stable Isotope Measurements of Indonesian Reef Corals

    SciTech Connect (OSTI)

    Moore, M.D.

    1995-12-31

    The Earth`s largest atmospheric convective center is the Indonesian Low. It generates the Australasian monsoon, drives the zonal tropospheric Walker Circulation, and is implicated in the genesis of the El Nino-Southern Oscillation (ENSO). The long-term variability of the Indonesian Low is poorly characterized, yet such information is crucial for evaluating whether changes in the strength and frequency of ENSO events are a possible manifestation of global warming. Stable oxygen isotope ratios ({delta}{sup 18}O) in shallow-water reef coral skeletons track topical convective activity over hundreds of years because the input of isotopically-depleted rainwater dilutes seawater {delta}{sup 18}O. Corals also impose a temperature-dependent fractionation on {delta}{sup 18}O, but where annual rainfall is high and sea surface temperature (SST) variability is low the freshwater flux effect dominates.

  14. Identifying Low pH Active and Lactate-Utilizing Taxa within Oral Microbiome Communities from Healthy Children Using Stable Isotope Probing Techniques

    SciTech Connect (OSTI)

    McLean, Jeffrey S.; Fansler, Sarah J.; Majors, Paul D.; Mcateer, Kathleen; Allen, Lisa Z.; Shirtliff, Mark E.; Lux, Renate; Shi, Wenyuan

    2012-03-05

    Many human microbial infectious diseases including dental caries are polymicrobial in nature and how these complex multi-species communities evolve from a healthy to a diseased state is not well understood. Although many health- or disease-associated oral microbes have been characterized in vitro, their physiology in vivo in the presence of the complex oral microbiome is difficult to determine with current approaches. In addition, about half of these oral species remain uncultivated to date and little is known except their 16S rRNA sequence. Lacking culture-based physiological analyses, the functional roles of uncultivated microorganisms will remain enigmatic despite their apparent disease correlation. To start addressing these knowledge gaps, we applied a novel combination of in vivo Magnetic Resonance Spectroscopy (MRS) with RNA and DNA based Stable Isotope Probing (SIP) to oral plaque communities from healthy children for temporal monitoring of carbohydrate utilization, organic acid production and identification of metabolically active and inactive bacterial species.

  15. Stable photoluminescence of zinc oxide quantum dots in silica nanoparticles matrix prepared by the combined sol{endash}gel and spray drying method

    SciTech Connect (OSTI)

    Mikrajuddin; Iskandar, F.; Okuyama, K.; Shi, F. G.

    2001-06-01

    A sol{endash}gel method was employed to produce a zinc oxide (ZnO) colloid consisting of ZnO nanocrystalline particles with an average diameter of {similar_to}3 nm, and subsequently mixed with a silica (SiO{sub 2}) colloid. The mixture was finally spray dried to form a powder nanocomposite. It was found that the green photoluminescence (PL) exhibited by the composite was very stable: the intensity, position, and shape do not change even after being aged over 30 days. Thus, the ZnO/SiO{sub 2} nanocomposite has a much improved PL stability over ZnO colloids, which is often found to undergo a significant redshift even after aging over a few days. Our results are expected to have significant technological implications. {copyright} 2001 American Institute of Physics.

  16. An investigation into the accuracy, stability and parallel performance of a highly stable explicit technique for stiff reaction-transport PDEs

    SciTech Connect (OSTI)

    Franz, A., LLNL

    1998-02-17

    The numerical simulation of chemically reacting flows is a topic, that has attracted a great deal of current research At the heart of numerical reactive flow simulations are large sets of coupled, nonlinear Partial Differential Equations (PDES). Due to the stiffness that is usually present, explicit time differencing schemes are not used despite their inherent simplicity and efficiency on parallel and vector machines, since these schemes require prohibitively small numerical stepsizes. Implicit time differencing schemes, although possessing good stability characteristics, introduce a great deal of computational overhead necessary to solve the simultaneous algebraic system at each timestep. This thesis examines an algorithm based on a preconditioned time differencing scheme. The algorithm is explicit and permits a large stable time step. An investigation of the algorithm`s accuracy, stability and performance on a parallel architecture is presented

  17. Semi-exclusive structure functions and inclusive form factors for ed{yields}e{sup '}{pi}NN in the energy region from threshold up to 500 MeV

    SciTech Connect (OSTI)

    Darwish, E.M. Al-Thoyaib, S.S.

    2009-08-15

    The separated structure functions R{sub L}, R{sub T}, R{sub LT}, and R{sub TT} governing the semi-exclusive differential cross section for the d(e,e{sup '}{pi})NN reaction are evaluated in the energy region from threshold up to 500 MeV. We present results for both the neutral and the charged pion production channels in a variety of kinematic settings. For the elementary pion electroproduction operator, the realistic unitary isobar MAID-2003 model is used which gives a good description of the process on the free nucleon. The completely inclusive form factors, which determine the inclusive differential cross section when only the scattered electron is detected, are also computed. It has been found that the structure functions and form factors reveal clear differences between the production dynamics for the {pi}{sup 0} and {pi}{sup {+-}} pions. Considerable dependencies of the structure functions and form factors on the pion angle and virtual photon lab-energy are found. The predicted results are found to be insensitive to the potential model used for the deuteron wave function.

  18. Production of inclusive Υ{hooktop}(1S) and Υ{hooktop}(2S) in p–Pb collisions at √sNN = 5.02 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    None

    2015-01-01

    We report on the production of inclusive Y{hooktop}(1S) and Y{hooktop} (2S) in p–Pb collisions at √sNN = 5.02 TeV at the LHC. The measurement is performed with the ALICE detector at backward (-4.46inclusive Υ{hooktop}(1S) yield in p–Pb collisions with respect to the yield from pp collisions scaled by the number of binary nucleon–nucleon collisions is observed atmore » forward rapidity but not at backward rapidity. The results are compared to theoretical model calculations including nuclear shadowing or partonic energy loss effects.« less

  19. Measurement of the inclusive production cross sections for forward jets and for dijet events with one forward and one central jet in pp collisions at sqrt(s) = 7 TeV

    SciTech Connect (OSTI)

    Chatrchyan, S.; et al.,

    2012-06-01

    The inclusive production cross sections for forward jets, as well for jets in dijet events with at least one jet emitted at central and the other at forward pseudorapidities, are measured in the range of transverse momenta pt = 35-150 GeV/c in proton-proton collisions at sqrt(s) = 7 TeV by the CMS experiment at the LHC. Forward jets are measured within pseudorapidities 3.2<|eta|<4.7, and central jets within the |eta|<2.8 range. The double differential cross sections with respect to pt and eta are compared to predictions from three approaches in perturbative quantum chromodynamics: (i) next-to-leading-order calculations obtained with and without matching to parton-shower Monte Carlo simulations, (ii) PYTHIA and HERWIG parton-shower event generators with different tunes of parameters, and (iii) CASCADE and HEJ models, including different non-collinear corrections to standard single-parton radiation. The single-jet inclusive forward jet spectrum is well described by all models, but not all predictions are consistent with the spectra observed for the forward-central dijet events.

  20. ARM - Instrument - s-table

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Richard Coulter Argonne National Laboratory (630) 252-5833 rlcoulter@anl.gov Annette Koontz Pacific Northwest National Laboratory Developer (509) 375-3609 annette.koontz@pnnl...

  1. Thermally stable nanoparticles on supports

    DOE Patents [OSTI]

    Roldan Cuenya, Beatriz; Naitabdi, Ahmed R.; Behafarid, Farzad

    2012-11-13

    An inverse micelle-based method for forming nanoparticles on supports includes dissolving a polymeric material in a solvent to provide a micelle solution. A nanoparticle source is dissolved in the micelle solution. A plurality of micelles having a nanoparticle in their core and an outer polymeric coating layer are formed in the micelle solution. The micelles are applied to a support. The polymeric coating layer is then removed from the micelles to expose the nanoparticles. A supported catalyst includes a nanocrystalline powder, thin film, or single crystal support. Metal nanoparticles having a median size from 0.5 nm to 25 nm, a size distribution having a standard deviation .ltoreq.0.1 of their median size are on or embedded in the support. The plurality of metal nanoparticles are dispersed and in a periodic arrangement. The metal nanoparticles maintain their periodic arrangement and size distribution following heat treatments of at least 1,000.degree. C.

  2. Phase stable rare earth garnets

    DOE Patents [OSTI]

    Kuntz, Joshua D.; Cherepy, Nerine J.; Roberts, Jeffery J.; Payne, Stephen A.

    2013-06-11

    A transparent ceramic according to one embodiment includes a rare earth garnet comprising A.sub.hB.sub.iC.sub.jO.sub.12, where h is 3.+-.10%, i is 2.+-.10%, and j is 3.+-.10%. A includes a rare earth element or a mixture of rare earth elements, B includes at least one of aluminum, gallium and scandium, and C includes at least one of aluminum, gallium and scandium, where A is at a dodecahedral site of the garnet, B is at an octahedral site of the garnet, and C is at a tetrahedral site of the garnet. In one embodiment, the rare earth garment has scintillation properties. A radiation detector in one embodiment includes a transparent ceramic as described above and a photo detector optically coupled to the rare earth garnet.

  3. Stable wafer-carrier system

    DOE Patents [OSTI]

    Rozenzon, Yan; Trujillo, Robert T; Beese, Steven C

    2013-10-22

    One embodiment of the present invention provides a wafer-carrier system used in a deposition chamber for carrying wafers. The wafer-carrier system includes a base susceptor and a top susceptor nested inside the base susceptor with its wafer-mounting side facing the base susceptor's wafer-mounting side, thereby forming a substantially enclosed narrow channel. The base susceptor provides an upward support to the top susceptor.

  4. Development of a stable cobalt-ruthenium Fischer-Tropsch catalyst. Technical progress reports No. 7 and 8, April 1, 1991--September 30, 1991

    SciTech Connect (OSTI)

    Abrevaya, H.

    1991-12-31

    The objective of this contract is to examine the relationship between catalytic properties and the function of cobalt Fischer-Tropsch catalysts and to apply this fundamental knowledge to the development of a stable cobalt-based catalyst with a low methane-plus-ethane selectivity for use in slurry reactors. An experimental cobalt catalyst 585R2723 was tested three times in the fixed-bed reactor. The objective of the tests was to identify suitable testing conditions for screening catalyst. The {alpha}-alumina was determined to be a suitable diluent medium for controlling the catalyst bed temperature close to the inlet temperature. With 13 g of catalyst and 155 g of diluent, the catalyst maximum temperature were within 2{degree}C from the inlet temperatures. As a result of this work, 210{degree}C and 21 atm were shown to result in low methane selectivity and were used as initial conditions in the catalyst screening test. Ethane, which along with methane is undesirable, is typically produced with low selectivity and follows the same trend as methane. Other work reported here indicated that methane selectivity increases with increasing temperature but is not excessively high at 230{degree}C. Consequently, the catalyst screening test should include an evaluation of the catalyst performance at 230{degree}C. During Run 67, the increase in temperature from 210{degree}C to 230{degree}C was initiated at 30 hours on-stream.

  5. Compression and immersion tests and leaching of radionuclides, stable metals, and chelating agents from cement-solidified decontamination waste collected from nuclear power stations

    SciTech Connect (OSTI)

    Akers, D.W.; Kraft, N.C.; Mandler, J.W.

    1994-06-01

    A study was performed for the Nuclear Regulatory Commission (NRC) to evaluate structural stability and leachability of radionuclides, stable metals, and chelating agents from cement-solidified decontamination ion-exchange resin wastes collected from seven commercial boiling water reactors and one pressurized water reactor. The decontamination methods used at the reactors were the Can-Decon, AP/Citrox, Dow NS-1, and LOMI processes. Samples of untreated resin waste and solidified waste forms were subjected to immersion and compressive strength testing. Some waste-form samples were leach-tested using simulated groundwaters and simulated seawater for comparison with the deionized water tests that are normally performed to assess waste-form leachability. This report presents the results of these tests and assesses the effects of the various decontamination methods, waste form formulations, leachant chemical compositions, and pH of the leachant on the structural stability and leachability of the waste forms. Results indicate that releases from intact and degraded waste forms are similar and that the behavior of some radionuclides such as {sup 55}Fe, {sup 60}Co, and {sup 99}Tc were similar. In addition, the leachability indexes are greater than 6.0, which meets the requirement in the NRC`s ``Technical Position on Waste Form,`` Revision 1.

  6. Sphere-Shaped Hierarchical Cathode with Enhanced Growth of Nanocrystal Planes for High-Rate and Cycling-Stable Li-Ion Batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Linjing; Li, Ning; Wu, Borong; Xu, Hongliang; Wang, Lei; Yang, Xiao-Qing; Wu, Feng

    2015-01-14

    High-energy and high-power Li-ion batteries have been intensively pursued as power sources in electronic vehicles and renewable energy storage systems in smart grids. With this purpose, developing high-performance cathode materials is urgently needed. Here we report an easy and versatile strategy to fabricate high-rate and cycling-stable hierarchical sphered cathode Li1.2Ni0.13Mn0.54Co0.13O2, by using an ionic interfusion method. The sphere-shaped hierarchical cathode is assembled with primary nanoplates with enhanced growth of nanocrystal planes in favor of Li+ intercalation/deintercalation, such as (010), (100), and (110) planes. This material with such unique structural features exhibits outstanding rate capability, cyclability, and high discharge capacities, achievingmore » around 70% (175 mAhg–1) of the capacity at 0.1 C rate within about 2.1 min of ultrafast charging. Such cathode is feasible to construct high-energy and high-power Li-ion batteries.« less

  7. An experimental study of CTOD for Mode I/Mode II stable crack growth in thin 2024-T3 aluminum specimens

    SciTech Connect (OSTI)

    Amstutz, B.E.; Sutton, M.A.; Dawicke, D.S.; Newman, J.C.

    1995-12-31

    An experimental study of crack tip opening displacement (CTOD) for Mode I/Mode II stable crack growth in thin sheet 2024-T3 aluminum has been conducted. To perform the experiments, an Arcan specimen and fixture was modified so that (1) slippage in the grips was eliminated, (2) large rotations of the fixture components were achievable and (3) bending stresses were minimized. Defining {Theta} to be the angle between the Mode I loading direction (perpendicular to the crack line) and the direction of applied loading, experimental results indicate that (a) for large amounts of crack extension, a {ge} 10mm, the value of CTOD at 1 mm behind the crack tip appears to approach a constant value of 0.1 mm for all modes of loading, (b) the direction of crack extension varied with applied mixed mode loading, (c) Mode I crack extension is predominant for 0{degree} {le} {Theta} {le} 60{degree}, (d) Mode II crack extension is predominant for 75{degree} {le} {Theta} {le} 90{degree} and (e) a transition zone exists for angles {Theta} near 75{degree}.

  8. Sphere-Shaped Hierarchical Cathode with Enhanced Growth of Nanocrystal Planes for High-Rate and Cycling-Stable Li-Ion Batteries

    SciTech Connect (OSTI)

    Zhang, Linjing; Li, Ning; Wu, Borong; Xu, Hongliang; Wang, Lei; Yang, Xiao-Qing; Wu, Feng

    2015-01-14

    High-energy and high-power Li-ion batteries have been intensively pursued as power sources in electronic vehicles and renewable energy storage systems in smart grids. With this purpose, developing high-performance cathode materials is urgently needed. Here we report an easy and versatile strategy to fabricate high-rate and cycling-stable hierarchical sphered cathode Li1.2Ni0.13Mn0.54Co0.13O2, by using an ionic interfusion method. The sphere-shaped hierarchical cathode is assembled with primary nanoplates with enhanced growth of nanocrystal planes in favor of Li+ intercalation/deintercalation, such as (010), (100), and (110) planes. This material with such unique structural features exhibits outstanding rate capability, cyclability, and high discharge capacities, achieving around 70% (175 mAhg–1) of the capacity at 0.1 C rate within about 2.1 min of ultrafast charging. Such cathode is feasible to construct high-energy and high-power Li-ion batteries.

  9. Induction of stable p53 oncoprotein and of c-myc overexpression in cultured normal human uroepithelium by radiation and N-nitrosodiethanolamine

    SciTech Connect (OSTI)

    Mothersill, C.; Seymour, C.B. ); Harney, J. )

    1994-04-01

    Uroepithelium cultured from normal patients without cancer (60 individuals) was found to segregate into four subtypes based on the level of carcinogen treatment needed to induce abnormal p53 and c-myc. Twenty-two percent of patient cultures never showed abnormal p53 expression, even after chronic exposure to nitrosamines, while a further 26% required only a single dose of radiation to induce the abnormal protein. The remaining patients had tissues which, while initially negative for stable p53, became positive when put into culture and stimulated to grow. The c-myc protein was overexpressed in all cultures with abnormal p53. It would appear that elevated expression of conformationally inactive p53 and of high levels of c-myc represents an early response of normal uroepithelial cells to carcinogen challenge. It also appears that a relatively high number of patients without cancer express these proteins when their cells are challenged to grow; a pre-exposure to environmental carcinogens such as nitrosamines in cigarette smoke is likely to be involved. 30 refs., 3 figs., 3 tabs.

  10. Measurement of the ratio of inclusive jet cross sections using the anti-kt algorithm with radius parameters R = 0.5 and 0.7 in pp collisions at sqrt(s) = 7 TeV

    SciTech Connect (OSTI)

    Chatrchyan, Serguei; et al.,

    2014-10-01

    Measurements of the inclusive jet cross section with the anti-kt clustering algorithm are presented for two radius parameters, R=0.5 and 0.7. They are based on data from LHC proton-proton collisions at $\\sqrt{s}$ = 7 TeV corresponding to an integrated luminosity of 5.0 inverse femtobarns collected with the CMS detector in 2011. The ratio of these two measurements is obtained as a function of the rapidity and transverse momentum of the jets. Significant discrepancies are found comparing the data to leading-order simulations and to fixed-order calculations at next-to-leading order, corrected for nonperturbative effects, whereas simulations with next-to-leading-order matrix elements matched to parton showers describe the data best.

  11. Single spin asymmetries in charged kaon production from semi-inclusive deep inelastic scattering on a transversely polarized He3 target

    SciTech Connect (OSTI)

    Zhao, Y. X.; Wang, Y.; Allada, K.; Aniol, K.; Annand, J. R.M.; Averett, T.; Benmokhtar, F.; Bertozzi, W.; Bradshaw, P. C.; Bosted, P.; Camsonne, A.; Canan, M.; Cates, G. D.; Chen, C.; Chen, J. -P.; Chen, W.; Chirapatpimol, K.; Chudakov, E.; Cisbani, E.; Cornejo, J. C.; Cusanno, F.; Dalton, M. M.; Deconinck, W.; de Jager, C. W.; De Leo, R.; Deng, X.; Deur, A.; Ding, H.; Dolph, P. A. M.; Dutta, C.; Dutta, D.; El Fassi, L.; Frullani, S.; Gao, H.; Garibaldi, F.; Gaskell, D.; Gilad, S.; Gilman, R.; Glamazdin, O.; Golge, S.; Guo, L.; Hamilton, D.; Hansen, O.; Higinbotham, D. W.; Holmstrom, T.; Huang, J.; Huang, M.; Ibrahim, H. F.; Iodice, M.; Jiang, X.; Jin, G.; Jones, M. K.; Katich, J.; Kelleher, A.; Kim, W.; Kolarkar, A.; Korsch, W.; LeRose, J. J.; Li, X.; Li, Y.; Lindgren, R.; Liyanage, N.; Long, E.; Lu, H. -J.; Margaziotis, D. J.; Markowitz, P.; Marrone, S.; McNulty, D.; Meziani, Z. -E.; Michaels, R.; Moffit, B.; Muñoz Camacho, C.; Nanda, S.; Narayan, A.; Nelyubin, V.; Norum, B.; Oh, Y.; Osipenko, M.; Parno, D.; Peng, J. -C.; Phillips, S. K.; Posik, M.; Puckett, A. J. R.; Qian, X.; Qiang, Y.; Rakhman, A.; Ransome, R.; Riordan, S.; Saha, A.; Sawatzky, B.; Schulte, E.; Shahinyan, A.; Shabestari, M. H.; Širca, S.; Stepanyan, S.; Subedi, R.; Sulkosky, V.; Tang, L. -G.; Tobias, A.; Urciuoli, G. M.; Vilardi, I.; Wang, K.; Wojtsekhowski, B.; Yan, X.; Yao, H.; Ye, Y.; Ye, Z.; Yuan, L.; Zhan, X.; Zhang, Y.; Zhang, Y. -W.; Zhao, B.; Zheng, X.; Zhu, L.; Zhu, X.; Zong, X.

    2014-11-03

    We report the first measurement of target single spin asymmetries of charged kaons produced in semi-inclusive deep inelastic scattering of electrons off a transversely polarized 3He target. Both the Collins and Sivers moments, which are related to the nucleon transversity and Sivers distributions, respectively, are extracted over the kinematic range of 0.1 < xbj<0.4 for K+ and K production. While the Collins and Sivers moments for K+ are consistent with zero within the experimental uncertainties, both moments for K favor negative values. The Sivers moments are compared to the theoretical prediction from a phenomenological fit to the world data. While the K+ Sivers moments are consistent with the prediction, the K results differ from the prediction at the 2-sigma level.

  12. Measurement of the ratios of the Z/gamma* + >= n jet production cross sections to the total inclusive Z/gamma* cross section in p anti-p collisions at s**(1/2) = 1.96-TeV

    SciTech Connect (OSTI)

    Abazov, V.M.; Abbott, B.; Abolins, M.; Acharya, B.S.; Adams, M.; Adams, T.; Agelou, M.; Ahn, S.H.; Ahsan, M.; Alexeev, G.D.; Alkhazov, G.; /Buenos Aires U. /Rio de Janeiro, CBPF /Rio de Janeiro State U. /Sao Paulo, IFT /Alberta U. /Simon Fraser U. /York U., Canada /McGill U. /Beijing, Inst. High Energy Phys. /Hefei, CUST /Andes U., Bogota

    2006-08-01

    We present a study of events with Z bosons and jets produced at the Fermilab Tevatron Collider in p{bar p} collisions at a center of mass energy of 1.96 TeV. The data sample consists of nearly 14,000 Z/{gamma}* {yields} e{sup +}e{sup -} candidates corresponding to the integrated luminosity of 340 pb{sup -1} collected using the D0 detector. Ratios of the Z/{gamma}* + {ge} n jet cross sections to the total inclusive Z/{gamma}* cross section have been measured for n = 1 to 4 jet events. Our measurements are found to be in good agreement with a next-to-leading order QCD calculation and with a tree-level QCD prediction with parton shower simulation and hadronization.

  13. Measurement of distributions sensitive to the underlying event in inclusive Z-boson production in pp collisions at √s = 7 TeV with the ATLAS detector

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aad, G.

    2014-12-10

    A measurement of charged-particle distributions sensitive to the properties of the underlying event is presented for an inclusive sample of events containing a \\(Z\\)-boson, decaying to an electron or muon pair. The measurement is based on data collected using the ATLAS detector at the LHC in proton–proton collisions at a centre-of-mass energy of \\(7\\) TeV with an integrated luminosity of \\(4.6\\) fb\\(^{-1}\\). Distributions of the charged particle multiplicity and of the charged particle transverse momentum are measured in regions of azimuthal angle defined with respect to the \\(Z\\)-boson direction. As a result, the measured distributions are compared to similar distributionsmore » measured in jet events, and to the predictions of various Monte Carlo generators implementing different underlying event models.« less

  14. Measurement of the ratio of inclusive jet cross sections using the anti-kT algorithm with radius parameters R=0.5 and 0.7 in pp collisions ats=7TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chatrchyan, S.; Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Bergauer, T.; Dragicevic, M.; Erö, J.; Fabjan, C.; Friedl, M.; et al

    2014-10-16

    Measurements of the inclusive jet cross section with the anti-kT clustering algorithm are presented for two radius parameters, R = 0.5 and 0.7. They are based on data from LHC proton-proton collisions at √s = 7  TeV corresponding to an integrated luminosity of 5.0  fb⁻¹ collected with the CMS detector in 2011. The ratio of these two measurements is obtained as a function of the rapidity and transverse momentum of the jets. Significant discrepancies are found comparing the data to leading-order simulations and to fixed-order calculations at next-to-leading order, corrected for nonperturbative effects, whereas simulations with next-to-leading-order matrix elements matched to partonmore » showers describe the data best.« less

  15. Highly Active and Stable MgAl2O4 Supported Rh and Ir Catalysts for Methane Steam Reforming: A Combined Experimental and Theoretical Study

    SciTech Connect (OSTI)

    Mei, Donghai; Glezakou, Vassiliki Alexandra; Lebarbier, Vanessa MC; Kovarik, Libor; Wan, Haiying; Albrecht, Karl O.; Gerber, Mark A.; Rousseau, Roger J.; Dagle, Robert A.

    2014-07-01

    In this work we present a combined experimental and theoretical investigation of stable MgAl2O4 spinel-supported Rh and Ir catalysts for the steam methane reforming (SMR) reaction. Firstly, catalytic performance for a series of noble metal catalysts supported on MgAl2O4 spinel was evaluated for SMR at 600-850C. Turnover rate at 850C follows the order: Pd > Pt > Ir > Rh > Ru > Ni. However, Rh and Ir were found to have the best combination of activity and stability for methane steam reforming in the presence of simulated biomass-derived syngas. It was found that highly dispersed ~2 nm Rh and ~1 nm Ir clusters were formed on the MgAl2O4 spinel support. Scanning Transition Electron Microscopy (STEM) images show that excellent dispersion was maintained even under challenging high temperature conditions (e.g. at 850C in the presence of steam) while Ir and Rh catalysts supported on Al2O3 were observed to sinter at increased rates under the same conditions. These observations were further confirmed by ab initio molecular dynamics (AIMD) simulations which find that ~1 nm Rh and Ir particles (50-atom cluster) bind strongly to the MgAl2O4 surfaces via a redox process leading to a strong metal-support interaction, thus helping anchor the metal clusters and reduce the tendency to sinter. Density functional theory (DFT) calculations suggest that these supported smaller Rh and Ir particles have a lower work function than larger more bulk-like ones, which enables them to activate both water and methane more effectively than larger particles, yet have a minimal influence on the relative stability of coke precursors. In addition, theoretical mechanistic studies were used to probe the relationship between structure and reactivity. Consistent with the experimental observations, our theoretical modeling results also suggest that the small spinel-supported Ir particle catalyst is more active than the counterpart of Rh catalyst for SMR. This work was financially supported by the United States Department of Energy (DOE)s Bioenergy Technologies Office (BETO) and performed at the Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for DOE by Battelle Memorial Institute. Computing time was granted by a user proposal at the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) located at PNNL. Part of the computational time was provided by the National Energy Research Scientific Computing Center (NERSC).

  16. Uranium, thorium isotopic analyses and uranium-series ages of calcite and opal, and stable isotopic compositions of calcite from drill cores UE25a No. 1, USW G-2 and USW G-3/GU-3, Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    Szabo, B.J.; Kyser, T.K.

    1985-12-31

    Fracture and cavity filling calcite and opal in the unsaturated zone of three drill cores at Yucca Mountain were analyzed for uranium and stable isotope contents, and were dated by the uranium-series method. Stable isotope data indicate that the water from which the calcite precipitated was meteoric in origin. The decrease in {sup 18}O and increase in {sup 13}C with depth are interpreted as being due to the increase in temperature in drill holes corresponding to an estimated maximum geothermal gradient of 43{sup 0} per km. Of the eighteen calcite and opal deposits dated, four of the calcite and all four of the opal deposits yield dates older than 400,000 years and ten of the remaining calcite deposits yield dates between 26,000 and 310,000 years. The stable isotope and uranium data together with the finite uranium-series dates of precipitation suggest a complex history of fluid movements, rock and water interactions, and episodes of fracture filling during the last 310,000 years. 10 refs., 7 figs., 4 tabs.

  17. Constraints on parton distribution functions and extraction of the strong coupling constant from the inclusive jet cross section in pp collisions at $\\sqrt{s}$ = 7 TeV

    SciTech Connect (OSTI)

    Khachatryan, Vardan

    2014-10-27

    The inclusive jet cross section for proton-proton collisions at a centre-of-mass energy of 7$~\\mathrm{TeV}$ was measured by the CMS Collaboration at the LHC with data corresponding to an integrated luminosity of 5.0$~\\mathrm{fb}^{-1}$. The measurement covers a phase space up to 2$~\\mathrm{TeV}$ in jet transverse momentum and 2.5 in absolute jet rapidity. The statistical precision of these data leads to stringent constraints on the parton distribution functions of the proton. The data provide important input for the gluon density at high fractions of the proton momentum and for the strong coupling constant at large energy scales. Using predictions from perturbative quantum chromodynamics at next-to-leading order, complemented with electroweak corrections, the constraining power of these data is investigated and the strong coupling constant at the Z boson mass $M_{\\mathrm{Z}}$ is determined to be $\\alpha_S(M_{\\mathrm{Z}}) = 0.1185 \\pm 0.0019\\,(\\mathrm{exp})\\,^{+0.0060}_{-0.0037}\\,(\\mathrm{theo})$, which is in agreement with the world average.

  18. Measurement of the inclusive 3-jet production differential cross section in proton–proton collisions at 7 TeV and determination of the strong coupling constant in the TeV range

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, Vardan

    2015-05-01

    This article presents a measurement of the inclusive 3-jet production differential cross section at a proton–proton centre-of-mass energy of 7 TeV using data corresponding to an integrated luminosity of 5fb–1 collected with the CMS detector. The analysis is based on the three jets with the highest transverse momenta. The cross section is measured as a function of the invariant mass of the three jets in a range of 445–3270 GeV and in two bins of the maximum rapidity of the jets up to a value of 2. A comparison between the measurement and the prediction from perturbative QCD at next-to-leadingmore » order is performed. Within uncertainties, data and theory are in agreement. The sensitivity of the observable to the strong coupling constant αS is studied. A fit to all data points with 3-jet masses larger than 664 GeV gives a value of the strong coupling constant of αS(MZ) = 0.1171 ± 0.0013(exp)+0.0073–0.0047(theo).« less

  19. Measurement of the inclusive 3-jet production differential cross section in proton-proton collisions at 7 TeV and determination of the strong coupling constant in the TeV range

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, Vardan

    2015-05-01

    This paper presents a measurement of the inclusive 3-jet production differential cross section at a proton-proton centre-of-mass energy of 7 TeV using data corresponding to an integrated luminosity of 5 fb$^{-1}$ collected with the CMS detector. The analysis is based on the three jets with the highest transverse momenta. The cross section is measured as a function of the invariant mass of the three jets in a range of 445-3270 GeV and in two bins of the maximum rapidity of the jets up to a value of 2. A comparison between the measurement and the prediction from perturbative QCD atmorenext-to-leading order is performed. Within uncertainties, data and theory are in agreement. The sensitivity of the observable to parameters of the theory such as the parton distribution functions of the proton and the strong coupling constant $\\alpha_S$ is studied. A fit to all data points with 3-jet masses larger than 664 GeV gives a value of the strong coupling constant of $\\alpha_S(M_\\mathrm{Z})$ = 0.1171 $\\pm$ 0.0013 (exp) $^{+0.0073}_{-0.0047}$ (theo).less

  20. Constraints on parton distribution functions and extraction of the strong coupling constant from the inclusive jet cross section in pp collisions at $\\sqrt{s}$ = 7 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, Vardan

    2014-10-27

    The inclusive jet cross section for proton-proton collisions at a centre-of-mass energy of 7$~\\mathrm{TeV}$ was measured by the CMS Collaboration at the LHC with data corresponding to an integrated luminosity of 5.0$~\\mathrm{fb}^{-1}$. The measurement covers a phase space up to 2$~\\mathrm{TeV}$ in jet transverse momentum and 2.5 in absolute jet rapidity. The statistical precision of these data leads to stringent constraints on the parton distribution functions of the proton. The data provide important input for the gluon density at high fractions of the proton momentum and for the strong coupling constant at large energy scales. Using predictions from perturbative quantummorechromodynamics at next-to-leading order, complemented with electroweak corrections, the constraining power of these data is investigated and the strong coupling constant at the Z boson mass $M_{\\mathrm{Z}}$ is determined to be $\\alpha_S(M_{\\mathrm{Z}}) = 0.1185 \\pm 0.0019\\,(\\mathrm{exp})\\,^{+0.0060}_{-0.0037}\\,(\\mathrm{theo})$, which is in agreement with the world average.less

  1. Measurement of the inclusive 3-jet production differential cross section in proton-proton collisions at 7 TeV and determination of the strong coupling constant in the TeV range

    SciTech Connect (OSTI)

    Khachatryan, Vardan

    2015-05-01

    This paper presents a measurement of the inclusive 3-jet production differential cross section at a proton-proton centre-of-mass energy of 7 TeV using data corresponding to an integrated luminosity of 5 fb$^{-1}$ collected with the CMS detector. The analysis is based on the three jets with the highest transverse momenta. The cross section is measured as a function of the invariant mass of the three jets in a range of 445-3270 GeV and in two bins of the maximum rapidity of the jets up to a value of 2. A comparison between the measurement and the prediction from perturbative QCD at next-to-leading order is performed. Within uncertainties, data and theory are in agreement. The sensitivity of the observable to parameters of the theory such as the parton distribution functions of the proton and the strong coupling constant $\\alpha_S$ is studied. A fit to all data points with 3-jet masses larger than 664 GeV gives a value of the strong coupling constant of $\\alpha_S(M_\\mathrm{Z})$ = 0.1171 $\\pm$ 0.0013 (exp) $^{+0.0073}_{-0.0047}$ (theo).

  2. Constraints on parton distribution functions and extraction of the strong coupling constant from the inclusive jet cross section in pp collisions at $$\\sqrt{s} = 7$$ $$\\,\\text {TeV}$$

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, Vardan

    2015-06-26

    The inclusive jet cross section for proton–proton collisions at a centre-of-mass energy of 7TeVwas measured by the CMS Collaboration at the LHC with data corresponding to an integrated luminosity of 5.0fb-1. The measurement covers a phase space up to 2TeV in jet transverse momentum and 2.5 in absolute jet rapidity. The statistical precision of these data leads to stringent constraints on the parton distribution functions of the proton. The data provide important input for the gluon density at high fractions of the proton momentum and for the strong coupling constant at large energy scales. Using predictions from perturbative quantum chromodynamicsmore » at next-to-leading order, complemented with electroweak corrections, the constraining power of these data is investigated and the strong coupling constant at the Z boson mass MZ is determined to be αS(MZ)=0.1185±0.0019(exp)+0.0060-0.0037(theo), which is in agreement with the world average.« less

  3. Measurement of the inclusive 3-jet production differential cross section in proton–proton collisions at 7 TeV and determination of the strong coupling constant in the TeV range

    SciTech Connect (OSTI)

    Khachatryan, Vardan

    2015-05-01

    This article presents a measurement of the inclusive 3-jet production differential cross section at a proton–proton centre-of-mass energy of 7 TeV using data corresponding to an integrated luminosity of 5fb–1 collected with the CMS detector. The analysis is based on the three jets with the highest transverse momenta. The cross section is measured as a function of the invariant mass of the three jets in a range of 445–3270 GeV and in two bins of the maximum rapidity of the jets up to a value of 2. A comparison between the measurement and the prediction from perturbative QCD at next-to-leading order is performed. Within uncertainties, data and theory are in agreement. The sensitivity of the observable to the strong coupling constant αS is studied. A fit to all data points with 3-jet masses larger than 664 GeV gives a value of the strong coupling constant of αS(MZ) = 0.1171 ± 0.0013(exp)+0.0073–0.0047(theo).

  4. Constraints on parton distribution functions and extraction of the strong coupling constant from the inclusive jet cross section in pp collisions at $\\sqrt{s} = 7$ $\\,\\text {TeV}$

    SciTech Connect (OSTI)

    Khachatryan, Vardan

    2015-06-26

    The inclusive jet cross section for proton–proton collisions at a centre-of-mass energy of 7TeVwas measured by the CMS Collaboration at the LHC with data corresponding to an integrated luminosity of 5.0fb-1. The measurement covers a phase space up to 2TeV in jet transverse momentum and 2.5 in absolute jet rapidity. The statistical precision of these data leads to stringent constraints on the parton distribution functions of the proton. The data provide important input for the gluon density at high fractions of the proton momentum and for the strong coupling constant at large energy scales. Using predictions from perturbative quantum chromodynamics at next-to-leading order, complemented with electroweak corrections, the constraining power of these data is investigated and the strong coupling constant at the Z boson mass MZ is determined to be αS(MZ)=0.1185±0.0019(exp)+0.0060-0.0037(theo), which is in agreement with the world average.

  5. Diversity and Inclusion | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    including, but not limited to, race, color, ethnicity, national origin, gender, age, religion, culture, language, disability, sexual orientation, gender identity, socioeconomic...

  6. Fluid Inclusion Analysis | Open Energy Information

    Open Energy Info (EERE)

    Geothermal Area (2004) Coso Geothermal Area 2004 2004 GEOTHERMAL FLUID PROPENE AND PROPANE: INDICATORS OF FLUID GEOLOGY AND MINERAL PARAGENESIS STUDY WITHIN THE COSO-EGS...

  7. NMR Spectroscopic Investigation of Inclusion Complexes between...

    Office of Scientific and Technical Information (OSTI)

    Resource Relation: Journal Name: Magnetic Resonance in Chemistry; Journal Volume: 50; Journal ... Country of Publication: United States Language: English Subject: 36 MATERIALS ...

  8. Diversity and Inclusion Specialist | Department of Energy

    Energy Savers [EERE]

    Merit Promotion announcement. Work Schedule Full time Work Type Permanent Series 0301 Salary Basis Per Year Grade 1313 Salary Min 87,994.00 Salary Max 114,390.00 Start Date...

  9. Inclusion of angular momentum in FREYA

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Randrup, Jørgen; Vogt, Ramona

    2015-05-18

    The event-by-event fission model FREYA generates large samples of complete fission events from which any observable can extracted, including fluctuations of the observables and the correlations between them. We describe here how FREYA was recently refined to include angular momentum throughout. Subsequently we present some recent results for both neutron and photon observables.

  10. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    and fluid inclusion task team. One hundred thirty (130) samples were prepared for trace element and stable isotope analysis, and six samples were submitted for strontium isotope...

  11. Credit rating agencies affirm BPA is stable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on financial performance, are not within BPA's control, but are mitigated in risk analysis and planning processes. But other challenges are within BPA's control, such as...

  12. Stable blue phosphorescent organic light emitting devices

    DOE Patents [OSTI]

    Forrest, Stephen R.; Thompson, Mark; Giebink, Noel

    2014-08-26

    Novel combination of materials and device architectures for organic light emitting devices is provided. An organic light emitting device, is provided, having an anode, a cathode, and an emissive layer disposed between the anode and the cathode. The emissive layer includes a host and a phosphorescent emissive dopant having a peak emissive wavelength less than 500 nm, and a radiative phosphorescent lifetime less than 1 microsecond. Preferably, the phosphorescent emissive dopant includes a ligand having a carbazole group.

  13. Method for cold stable biojet fuel

    DOE Patents [OSTI]

    Seames, Wayne S.; Aulich, Ted

    2015-12-08

    Plant or animal oils are processed to produce a fuel that operates at very cold temperatures and is suitable as an aviation turbine fuel, a diesel fuel, a fuel blendstock, or any fuel having a low cloud point, pour point or freeze point. The process is based on the cracking of plant or animal oils or their associated esters, known as biodiesel, to generate lighter chemical compounds that have substantially lower cloud, pour, and/or freeze points than the original oil or biodiesel. Cracked oil is processed using separation steps together with analysis to collect fractions with desired low temperature properties by removing undesirable compounds that do not possess the desired temperature properties.

  14. Stable surface passivation process for compound semiconductors

    DOE Patents [OSTI]

    Ashby, Carol I. H.

    2001-01-01

    A passivation process for a previously sulfided, selenided or tellurated III-V compound semiconductor surface. The concentration of undesired mid-gap surface states on a compound semiconductor surface is reduced by the formation of a near-monolayer of metal-(sulfur and/or selenium and/or tellurium)-semiconductor that is effective for long term passivation of the underlying semiconductor surface. Starting with the III-V compound semiconductor surface, any oxidation present thereon is substantially removed and the surface is then treated with sulfur, selenium or tellurium to form a near-monolayer of chalcogen-semiconductor of the surface in an oxygen-free atmosphere. This chalcogenated surface is then contacted with a solution of a metal that will form a low solubility chalcogenide to form a near-monolayer of metal-chalcogen-semiconductor. The resulting passivating layer provides long term protection for the underlying surface at or above the level achieved by a freshly chalcogenated compound semiconductor surface in an oxygen free atmosphere.

  15. Thermally stable, plastic-bonded explosives

    DOE Patents [OSTI]

    Benziger, Theodore M.

    1979-01-01

    By use of an appropriate thermoplastic rubber as the binder, the thermal stability and thermal stress characteristics of plastic-bonded explosives may be greatly improved. In particular, an HMX-based explosive composition using an oil-extended styrene-ethylenebutylene-styrene block copolymer as the binder exhibits high explosive energy and thermal stability and good handling safety and physical properties.

  16. Stable Boundary Layer Education Field Campaign Summary

    Office of Scientific and Technical Information (OSTI)

    ... in the wind field; this change was made and a new event ... The bore was triggered by outflow from the convective system ... to the instruments for class tours, the Doppler lidar ...

  17. Ultratough, Thermally Stable Polycrystalline Diamond/Silicon...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Synthesis, Characterization, and Application of Nanostructured Diamond Silicon Carbide ... INDUSTRIAL TECHNOLOGIES PROGRAM Pathways This project is focusing on reducing synthesis ...

  18. DIMENSIONALLY STABLE, CORROSION RESISTANT NUCLEAR FUEL

    DOE Patents [OSTI]

    Kittel, J.H.

    1963-10-31

    A method of making a uranium alloy of improved corrosion resistance and dimensional stability is described. The alloy contains from 0-9 weight per cent of an additive of zirconium and niobium in the proportions by weight of 5 to 1 1/ 2. The alloy is cold rolled, heated to two different temperatures, air-cooled, heated to a third temperature, and quenched in water. (AEC)

  19. Establishment of stable synthetic mutualism without co-evolution between microalgae and bacteria demonstrated by mutual transfer of metabolites (NanoSIMS isotopic imaging) and persistent physical association (Fluorescent in situ hybridization)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    de-Bashan, Luz E.; Mayali, Xavier; Bebout, Brad M.; Weber, Peter K.; Detweiler, Angela M.; Hernandez, Juan- Pablo; Prufert-Bebout, Leslie; Bashan, Yoav

    2016-03-03

    The demonstration of a mutualistic interaction requires evidence of benefits for both partners as well as stability of the association over multiple generations. A synthetic mutualism between the freshwater microalga Chlorella sorokiniana and the soil-derived plant growth-promoting bacterium (PGPB) Azospirillum brasilense was created when both microorganisms were co-immobilized in alginate beads. Using stable isotope enrichment experiments followed by high-resolution secondary ion mass spectrometry (SIMS) imaging of single cells, we demonstrated transfer of carbon and nitrogen compounds between the two partners. Further, using fluorescent in situ hybridization (FISH), mechanical disruption and scanning electron microscopy, we demonstrated the stability of their physicalmore » association for a period of 10 days after the aggregated cells were released from the beads. The bacteria significantly enhanced the growth of the microalgae while the microalgae supported growth of the bacteria in a medium where it could not otherwise grow. In conclusion, we propose that this microalga-bacterium association is a true synthetic mutualism independent of co-evolution. (155 words).« less

  20. EVOLUTION OF THE SOLAR NEBULA. IX. GRADIENTS IN THE SPATIAL HETEROGENEITY OF THE SHORT-LIVED RADIOISOTOPES {sup 60}Fe AND {sup 26}Al AND THE STABLE OXYGEN ISOTOPES

    SciTech Connect (OSTI)

    Boss, Alan P.

    2011-10-01

    Short-lived radioisotopes (SLRIs) such as {sup 60}Fe and {sup 26}Al were likely injected into the solar nebula in a spatially and temporally heterogeneous manner. Marginally gravitationally unstable (MGU) disks, of the type required to form gas giant planets, are capable of rapid homogenization of isotopic heterogeneity as well as of rapid radial transport of dust grains and gases throughout a protoplanetary disk. Two different types of new models of an MGU disk in orbit around a solar-mass protostar are presented. The first set has variations in the number of terms in the spherical harmonic solution for the gravitational potential, effectively studying the effect of varying the spatial resolution of the gravitational torques responsible for MGU disk evolution. The second set explores the effects of varying the initial minimum value of the Toomre Q stability parameter, from values of 1.4 to 2.5, i.e., toward increasingly less unstable disks. The new models show that the basic results are largely independent of both sets of variations. MGU disk models robustly result in rapid mixing of initially highly heterogeneous distributions of SLRIs to levels of {approx}10% in both the inner (<5 AU) and outer (>10 AU) disk regions, and to even lower levels ({approx}2%) in intermediate regions, where gravitational torques are most effective at mixing. These gradients should have cosmochemical implications for the distribution of SLRIs and stable oxygen isotopes contained in planetesimals (e.g., comets) formed in the giant planet region ({approx}5 to {approx}10 AU) compared to those formed elsewhere.

  1. Diversity and Inclusion Events Calendar | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Training, networking, and career-building conferences like the ones below are valuable ways to engage in diversity issues. Learn about upcoming events on the calendar below, and...

  2. Gas Analysis Of Geothermal Fluid Inclusions- A New Technology...

    Open Energy Info (EERE)

    6,000, and the turn around time is a few weeks. Authors David I. Norman and Joseph Moore Published Geothermal Technologies Legacy Collection, 2004 DOI Not Provided Check for...

  3. Fluid Inclusion Analysis At Coso Geothermal Area (1999) | Open...

    Open Energy Info (EERE)

    Devil's Kitchen fumarole area and from Coso production wells. References Lutz, S.J.; Moore, J.N.; Adams, M.C.; Norman, D.I. (1 January 1999) TRACING FLUID SOURCES IN THE COSO...

  4. Fluid Inclusion Gas Compositions From An Active Magmatic-Hydrothermal...

    Open Energy Info (EERE)

    remained closed to the diffusion of He and H2 since their formation. Authors Joseph N. Moore, David I. Norman and B. Mack Kennedy Published Journal Chemical Geology, 2001 DOI...

  5. Fluid Inclusion Analysis At Coso Geothermal Area (2005-2006)...

    Open Energy Info (EERE)

    Interpretation of New Wells in the Coso Geothermal Field Dilley, L. M.; Norman, D.I.; Moore, J.; McCulloch, J. (1 January 2006) Fluid Stratigraphy and Permeable Zones of the Coso...

  6. Inclusive. chi. (2 P ) production in. Upsilon. (3 S ) decay

    SciTech Connect (OSTI)

    Morrison, R.; Schmidt, D.; Procario, M.; Johnson, D.R.; Lingel, K.; Rankin, P.; Smith, J.G.; Alexander, J.; Artuso, M.; Bebek, C.; Berkelman, K.; Besson, D.; Browder, T.E.; Cassel, D.G.; Cheu, E.; Coffman, D.M.; Drell, P.S.; Ehrlich, R.; Galik, R.S.; Garcia-Sciveres, M.; Geiser, B.; Gittelman, B.; Gray, S.W.; Hartill, D.L.; Heltsley, B.K.; Honscheid, K.; Kandaswamy, J.; Katayama, N.; Kreinick, D.L.; Lewis, J.D.; Ludwig, G.S.; Masui, J.; Mevissen, J.; Mistry, N.B.; Nandi, S.; Ng, C.R.; Nordberg, E.; O'Grady, C.; Patterson, J.R.; Peterson, D.; Pisharody, M.; Riley, D.; Sapper, M.; Selen, M.; Worden, H.; Worris, M.; Avery, P.; Freyberger, A.; Rodriguez, J.; Yelton, J.; Kinoshita, K.; Pipkin, F.; Wilson, R.; Wolinski, J.; Xiao, D.; Sadoff, A.J.; Ammar, R.; Baringer, P.; Coppage, D.; Davis, R.; Haas, P.; Kelly, M.; Kwak, N.; Lam, H.; Ro, S.; Kubota, Y.; Nelson, J.K.; Perticone, D.; Poling, R.; Schrenk, S.; Alam, M.S.; Kim, I.J.; Nemati, B.; Romero, V.; Sun, C.R.; Wang, P.; Zoeller, M.M.; Cr

    1991-09-23

    Using the CsI calorimeter of the CLEO II detector, the spin triplet {chi}{sub {ital b}}(2{ital P}) states are observed in {Upsilon}(3{ital S}) radiative decays with much higher statistics than seen in previous experiments. The observed mass splittings are not described well by theoretical models, while the relative branching ratios agree with predictions that include relativistic corrections to the radiative transition rates.

  7. Microsoft Word - DOE 2012-2015 Diversityand inclusion Strategic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A successful approach goes to the heart of an organization: the attitudes, beliefs, behaviors and expectations of all individuals from the top to the bottom. We believe the ...

  8. ORGANIC SPECIES IN GEOTHERMAL WATERS IN LIGHT OF FLUID INCLUSION...

    Open Energy Info (EERE)

    that indicate H2 concentrations > 0.001 mol % typically have ethane > ethylene, propane > propylene, and butane > butylene. There are three end member fluid compositions:...

  9. Fluid Inclusion Analysis At Coso Geothermal Area (2003) | Open...

    Open Energy Info (EERE)

    that indicate H2 concentrations > 0.001 mol % typically have ethane > ethylene, propane > propylene, and butane > butylene. There are three end member fluid compositions...

  10. FLUID INCLUSION STRATIGRAPHY: NEW METHOD FOR GEOTHERMAL RESERVOIR...

    Open Energy Info (EERE)

    logs are analyzed in detail. Select species including carbon dioxide, nitrogen, argon, methane, and hydrogen sulfide show distinct differences between producing and nonproducing...

  11. Inclusion of nonlinear aerodynamics in the FLAP code

    SciTech Connect (OSTI)

    Weber, T. (Solar Energy Research Inst., Golden, CO (USA)) [Solar Energy Research Inst., Golden, CO (USA)

    1989-11-01

    Horizontal axis wind turbines usually operate with significant portions of the blade in deep stall. This contradicts the assumption in the FLAP code that a linear relation exists between the angle of attack and the lift coefficient. The objective of this paper is to determine the importance of nonlinear aerodynamics in the prediction of loads. The FLAP code has been modified to include the nonlinear relationships between the lift and drag coefficients with the angle of attack. The modification affects the calculation of the induced velocities and the aerodynamic loads. This requires an iterative procedure to determine the induced velocities instead of a closed form solution. A more advanced tower interference model has also been added that accounts for both upwind and downwind tower effects. 7 refs., 14 figs.

  12. Inclusive Rates and Spectra of the Lambda, Cascade, and Omega...

    Office of Scientific and Technical Information (OSTI)

    the hadronization process, currently one of the unresolved problem areas in the standard model of particle physics. This analysis was conducted using codes from release 16 series. ...

  13. U.S. Virgin Islands Leadership Embraces Inclusiveness to Ensure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Because the territory had a history of unsuccessful government initiatives and poorly ... The frst day would be geared toward teeing up the project, whereas the second day would be ...

  14. Mary Ann Fresco receives OPM award for creating, fostering inclusive...

    National Nuclear Security Administration (NNSA)

    She recently participated in an interagency detail to OPM where she led change and ... She led OPM's external initiative by partnering, collaborating and networking with more ...

  15. Diversity and Inclusion Events Calendar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 2016 < prev next > Sun Mon Tue Wed Thu Fri Sat 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 1 2 3 4 5...

  16. Diversity and Inclusion Events Calendar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 2016 < prev next > Sun Mon Tue Wed Thu Fri Sat 28 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2...

  17. Diversity and Inclusion Events Calendar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    December 2015 < prev next > Sun Mon Tue Wed Thu Fri Sat 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2...

  18. Diversity and Inclusion Events Calendar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 2015 < prev next > Sun Mon Tue Wed Thu Fri Sat 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1 2 3 4 5...

  19. U.S. Virgin Islands Leadership Embraces Inclusiveness to Ensure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Island Nations), U.S. Virgin Islands A 448-kW PV system installed at the Cyril E. King Airport on St. Thomas in April 2011. Photo by Adam Warren, NREL 18953 U.S. ...

  20. Search for Bs Mixing with Inclusive Leptons at SLD (Technical...

    Office of Scientific and Technical Information (OSTI)

    exploiting the high psub T lepton and the semileptonic decay topology. No significant mixing signal was found and the following ranges of the oscillation frequency of Bsub ...