Powered by Deep Web Technologies
Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Building Energy Software Tools Directory: Easy EnergyPlus  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Easy EnergyPlus Easy EnergyPlus Easy EnergyPlus is a Chinese language interface for EnergyPlus that is being developed by the School of Environmental Science and Engineering, Tianjin University in China. The beta version of Easy EnergyPlus can accept input data required by EnergyPlus and run a simulation with the EnergyPlus engine. Nearly all of the interface is in Chinese, including menus, toolbars, labels, and lists. Entering input data in Chinese characters is also supported. The interface also lists the common construction materials in the Chinese market and allows the selection of popular HVAC systems in China. Easy EnergyPlus was created to acquaint more Chinese people with EnergyPlus and help improve energy consumption calculation and analysis in China. Easy EnergyPlus is currently only compatible with EnergyPlus version

2

Building Energy Software Tools Directory: EnergyPlus  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EnergyPlus EnergyPlus EnergyPlus Logo Next generation building energy simulation program that builds on the most popular features and capabilities of BLAST and DOE-2. EnergyPlus includes innovative simulation capabilities including time steps of less than an hour, modular systems simulation modules that are integrated with a heat balance-based zone simulation, and input and output data structures tailored to facilitate third party interface development. Recent additions include multizone airflow, electric power simulation including fuel cells and other distributed energy systems, and water manager that controls and report water use throughout the building systems, rainfall, groundwater, and zone water use. Keywords energy simulation, load calculation, building performance, simulation,

3

Tax Deduction Qualified Software - EnergyPlus version 3.1.0.027  

Broader source: Energy.gov (indexed) [DOE]

EnergyPlus version 3.1.0.027 EnergyPlus version 3.1.0.027 On this page you'll find information about the EnergyPlus version 3.1.0.027 qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 8 May 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 http://www.energyplus.gov

4

Tax Deduction Qualified Software - EnergyPlus version 3.1.0.027...  

Broader source: Energy.gov (indexed) [DOE]

On this page you'll find information about the EnergyPlus version 3.1.0.027 qualified computer software which calculates energy and power cost savings that meet federal tax...

5

Tax Deduction Qualified Software - EnergyPlus version 3.0.0.028...  

Broader source: Energy.gov (indexed) [DOE]

On this page you'll find information about the EnergyPlus version 3.0.0.028 qualified computer software which calculates energy and power cost savings that meet federal tax...

6

Tax Deduction Qualified Software: EnergyPlus version 8.0.0.008  

Broader source: Energy.gov (indexed) [DOE]

EnergyPlus version 8.0.0.008 EnergyPlus version 8.0.0.008 On this page you'll find information about the EnergyPlus version 8.0.0.008 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 28 May 2013 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121

7

Tax Deduction Qualified Software: EnergyPlus version 4.0.0.024  

Broader source: Energy.gov (indexed) [DOE]

Tax Deduction Qualified Software Tax Deduction Qualified Software EnergyPlus version 4.0.0.024 On this page you'll find information about the EnergyPlus version 4.0.0.024 qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 22 October 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW

8

Building Technologies Program: Tax Deduction Qualified Software - EnergyPlus version 2.2.0.023  

Broader source: Energy.gov (indexed) [DOE]

2.2.0.023 2.2.0.023 On this page you'll find information about the EnergyPlus version 2.2.0.023 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 12 June 2008 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 http://www.energyplus.gov

9

Building Technologies Program: Tax Deduction Qualified Software - EnergyPlus version 2.1.0.023  

Broader source: Energy.gov (indexed) [DOE]

1.0.023 1.0.023 On this page you'll find information about the EnergyPlus version 2.1.0.023 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings (www.buildings.energy.gov/commercial/). Date Documentation Received by DOE: 7 December 2007 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 www.energyplus.gov (2) The name, email address, and telephone number

10

Tax Deduction Qualified Software: EnergyPlus version 5.0.0.031  

Broader source: Energy.gov (indexed) [DOE]

5.0.0.031 5.0.0.031 On this page you'll find information about the EnergyPlus version 5.0.0.031 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 06 June 2010 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 http://www.energyplus.gov

11

Tax Deduction Qualified Software: EnergyPlus version 7.1.0.012  

Broader source: Energy.gov (indexed) [DOE]

1.0.012 1.0.012 On this page you'll find information about the EnergyPlus version 7.1.0.012 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 25 June 2012 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 http://www.energyplus.gov

12

Tax Deduction Qualified Software: EnergyPlus version 6.0.0.023  

Broader source: Energy.gov (indexed) [DOE]

6.0.0.023 6.0.0.023 On this page you'll find information about the EnergyPlus version 6.0.0.023 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 29 October 2010 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 http://www.energyplus.gov

13

Tax Deduction Qualified Software: EnergyPlus version 7.2.0.006  

Broader source: Energy.gov (indexed) [DOE]

2.0.006 2.0.006 On this page you'll find information about the EnergyPlus version 7.2.0.006 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 6 November 2012 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 http://www.energyplus.gov

14

Tax Deduction Qualified Software - EnergyPlus version 3.0.0.028  

Broader source: Energy.gov (indexed) [DOE]

3.0.0.028 3.0.0.028 On this page you'll find information about the EnergyPlus version 3.0.0.028 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 15 January 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 http://www.energyplus.gov

15

Building Technologies Program: Tax Deduction Qualified Software - EnergyPlus version 1.3.0.018  

Broader source: Energy.gov (indexed) [DOE]

3.0.018 3.0.018 On this page you'll find information about the EnergyPlus version 1.3.0.018 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings (www.buildings.energy.gov/commercial/). Date Documentation Received by DOE: 23 June 2006 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 www.energyplus.gov (2) The name, email address, and telephone number

16

Building Technologies Program: Tax Deduction Qualified Software - EnergyPlus version 2.0.0.025  

Broader source: Energy.gov (indexed) [DOE]

0.0.025 0.0.025 On this page you'll find information about the EnergyPlus version 2.0.0.025 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings (www.buildings.energy.gov/commercial/). Date Documentation Received by DOE: 2 May 2007 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 www.energyplus.gov (2) The name, email address, and telephone number

17

Building Technologies Program: Tax Deduction Qualified Software - EnergyPlus version 1.4.0.025  

Broader source: Energy.gov (indexed) [DOE]

4.0.025 4.0.025 On this page you'll find information about the EnergyPlus version 1.4.0.025 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings (www.buildings.energy.gov/commercial/). Date Documentation Received by DOE: 1 November 2006 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW Washington, DC 20585-0121 www.energyplus.gov (2) The name, email address, and telephone number

18

Building Technologies Program: Tax Deduction Qualified Software- EnergyPlus version 1.4.0.025  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 1.4.0.025 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

19

Building Technologies Program: Tax Deduction Qualified Software- EnergyPlus version 2.1.0.023  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 2.1.0.023 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

20

Building Technologies Program: Tax Deduction Qualified Software- EnergyPlus version 2.0.0.025  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 2.0.0.025 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Building Technologies Program: Tax Deduction Qualified Software- EnergyPlus version 1.3.0.018  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 1.3.0.018 version 130 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

22

Tax Deduction Qualified Software: EnergyPlus version 7.2.0.006  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 7.2.0.006 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

23

Tax Deduction Qualified Software: EnergyPlus version 7.1.0.012  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 7.1.0.012 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

24

Tax Deduction Qualified Software: EnergyPlus Version 8.2.0  

Broader source: Energy.gov [DOE]

On this page you'll find information about the EnergyPlus version 8.2.0, which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

25

Tax Deduction Qualified Software: EnergyPlus version 4.0.0.024  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 4.0.0.024 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

26

Tax Deduction Qualified Software: EnergyPlus version 8.1.0.009  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 8.1.0.009 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

27

Building Technologies Program: Tax Deduction Qualified Software- EnergyPlus version 2.2.0.023  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 2.1.0.023 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

28

Tax Deduction Qualified Software: EnergyPlus version 8.0.0.008  

Broader source: Energy.gov [DOE]

Provides required documentation that EnergyPlus version 8.0.0.008 meets Internal Revenue Code 179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

29

EnergyPlus Run Time Analysis  

SciTech Connect (OSTI)

EnergyPlus is a new generation building performance simulation program offering many new modeling capabilities and more accurate performance calculations integrating building components in sub-hourly time steps. However, EnergyPlus runs much slower than the current generation simulation programs. This has become a major barrier to its widespread adoption by the industry. This paper analyzed EnergyPlus run time from comprehensive perspectives to identify key issues and challenges of speeding up EnergyPlus: studying the historical trends of EnergyPlus run time based on the advancement of computers and code improvements to EnergyPlus, comparing EnergyPlus with DOE-2 to understand and quantify the run time differences, identifying key simulation settings and model features that have significant impacts on run time, and performing code profiling to identify which EnergyPlus subroutines consume the most amount of run time. This paper provides recommendations to improve EnergyPlus run time from the modeler?s perspective and adequate computing platforms. Suggestions of software code and architecture changes to improve EnergyPlus run time based on the code profiling results are also discussed.

Hong, Tianzhen; Buhl, Fred; Haves, Philip

2008-09-20T23:59:59.000Z

30

Real-time Building Energy Simulation using EnergyPlus and the Building  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Real-time Building Energy Simulation using EnergyPlus and the Building Real-time Building Energy Simulation using EnergyPlus and the Building Controls Virtual Test Bed Title Real-time Building Energy Simulation using EnergyPlus and the Building Controls Virtual Test Bed Publication Type Conference Proceedings LBNL Report Number LBNL-5390E Year of Publication 2011 Authors Pang, Xiufeng, Prajesh Bhattacharya, Zheng O'Neill, Philip Haves, Michael Wetter, and Trevor Bailey Conference Name Proc. of the 12th IBPSA Conference Pagination p. 2890-2896 Date Published 11/2011 Conference Location Sydney, Australia Abstract Most commercial buildings do not perform as well in practice as intended by the design and their performances often deteriorate over time. Reasons include faulty construction, malfunctioning equipment, incorrectly configured control systems and inappropriate operating procedures (Haves et al., 2001, Lee et al., 2007). To address this problem, the paper presents a simulation-based whole building performance monitoring tool that allows a comparison of building actual performance and expected performance in real time. The tool continuously acquires relevant building model input variables from existing Energy Management and Control System (EMCS). It then reports expected energy consumption as simulated of EnergyPlus. The Building Control Virtual Test Bed (BCVTB) is used as the software platform to provide data linkage between the EMCS, an EnergyPlus model, and a database. This paper describes the integrated real-time simulation environment. A proof-of-concept demonstration is also presented in the paper.

31

EnergyPlus  

Broader source: Energy.gov (indexed) [DOE]

EnergyPlus EnergyPlus Brent T. Griffith NREL Brent.Griffith@nrel.gov 303-384-7395 April 2, 2013 LBNL - P. Haves, F. Buhl, M. Wetter, T. Hong, T. Nouidui, S. Vidanovic, G. Sawaya NREL - B. Griffith, E. Bonnema, P. Tabares ORNL - J. New, B. Fricke, B. Shen, M. Bhandari PNNL - K. Gowri, W. Wang, D. Kang FSEC - L. Gu, R. Raustad, B. Nigusse, C. Sharma GARD Analytics - M. Witte, J. Glazer, R. Henninger DHL Consulting - L. Lawrie

32

EnergyPlus  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EnergyPlus EnergyPlus Brent T. Griffith NREL Brent.Griffith@nrel.gov 303-384-7395 April 2, 2013 LBNL - P. Haves, F. Buhl, M. Wetter, T. Hong, T. Nouidui, S. Vidanovic, G. Sawaya NREL - B. Griffith, E. Bonnema, P. Tabares ORNL - J. New, B. Fricke, B. Shen, M. Bhandari PNNL - K. Gowri, W. Wang, D. Kang FSEC - L. Gu, R. Raustad, B. Nigusse, C. Sharma GARD Analytics - M. Witte, J. Glazer, R. Henninger DHL Consulting - L. Lawrie

33

EnergyPlus 7.0 | Open Energy Information  

Open Energy Info (EERE)

EnergyPlus 7.0 EnergyPlus 7.0 (Redirected from EnergyPlus) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: EnergyPlus Simulation Program Agency/Company /Organization: U.S. Department of Energy Sector: Energy Focus Area: Buildings Topics: Resource assessment Resource Type: Training materials, Software/modeling tools User Interface: Desktop Application Website: apps1.eere.energy.gov/buildings/energyplus/ Country: United States Cost: Free OpenEI Keyword(s): EERE tool, EnergyPlus Simulation Program, EnergyPlus Northern America Coordinates: 37.09024°, -95.712891° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.09024,"lon":-95.712891,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

34

On-Site Generation Simulation with EnergyPlus for CommercialBuildings  

SciTech Connect (OSTI)

Building energy simulation software (e.g., EnergyPlus) is apowerful tool used widely by designers and researchers. However, currentsoftware is limited in modeling distributed generation (DG), including DGwith heat recovery applied to building end-use, i.e., combined heat andpower (CHP). Concurrently, DG investment and dispatch optimizationsoftware has been developed, yet has not been linked to a building energysimulation program for accurate assessment of DG designs, particularlyunder uncertainty in future end-use loads and equipment availability. CHPis a proven approach to cost effective reductions in primary fuelconsumption and CO2 emissions. Integrating DG system design and controlsinto building energy simulation is an important step towards popular DGacceptance. We propose to extend the existing building energy simulationprogram, EnergyPlus (E+), to enable the simulation of various DG modulesand associated control strategies in order to achieve more accurate andholistic analysis of DG technologies. Extension of EnergyPlus isconveniently facilitated by SPARK, a program capable of modeling buildingequipment and controls as individual modules. These modules can beautomatically integrated with EnergyPlus building models. Candidate DGsystems can be selected from the DG investment optimization program,Distributed Energy Resources Customer Adoption Model (DER-CAM). Thedispatch of the modeled DG system can be determined by a novel dispatchoptimization algorithm, the Energy Manager, that accounts for uncertaintyin future load and DG availability, as well as curtailment options. DGequipment and controls can modeled in SPARK and integrated intoEnergyPlus building models. The way to this holistic approach will bedescribed in this paper.

Stadler, Michael; Firestone, Ryan; Curtil, Dimitri; Marnay, Chris

2006-05-16T23:59:59.000Z

35

EnergyPlus Run Time Analysis  

E-Print Network [OSTI]

Tree LawrenceBerkeleyNationalLaboratory Page37 California EnergyEnergy Commission EnergyPlus Run Time Analysis Plant Supply Calling Tree (Energy Commission EnergyPlus Run Time Analysis Appendix A EnergyPlus Call Tree

Hong, Tianzhen

2009-01-01T23:59:59.000Z

36

Real-Time Building Energy Simulation Using EnergyPlus and the Building Controls Test Bed  

SciTech Connect (OSTI)

Most commercial buildings do not perform as well in practice as intended by the design and their performances often deteriorate over time. Reasons include faulty construction, malfunctioning equipment, incorrectly configured control systems and inappropriate operating procedures (Haves et al., 2001, Lee et al., 2007). To address this problem, the paper presents a simulation-based whole building performance monitoring tool that allows a comparison of building actual performance and expected performance in real time. The tool continuously acquires relevant building model input variables from existing Energy Management and Control System (EMCS). It then reports expected energy consumption as simulated of EnergyPlus. The Building Control Virtual Test Bed (BCVTB) is used as the software platform to provide data linkage between the EMCS, an EnergyPlus model, and a database. This paper describes the integrated real-time simulation environment. A proof-of-concept demonstration is also presented in the paper.

Pang, Xiufeng; Bhattachayra, Prajesh; O'Neill, Zheng; Haves, Philip; Wetter, Michael; Bailey, Trevor

2011-11-01T23:59:59.000Z

37

On-Site Generation Simulation with EnergyPlus for Commercial Buildings  

E-Print Network [OSTI]

L ABORATORY On-Site Generation Simulation with EnergyPlusemployer. On-Site Generation Simulation with EnergyPlus forin modeling distributed generation (DG), including DG with

Stadler, Michael; Firestone, Ryan; Curtil, Dimitri; Marnay, Chris

2006-01-01T23:59:59.000Z

38

EnergyPlus Review Panel: Summary of Conclusions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EnergyPlus Review Panel: Summary of Conclusions EnergyPlus Review Panel: Summary of Conclusions Speaker(s): Charles S. "Chip" Barnaby Robert Sonderegger Date: May 13, 2010 - 2:00pm Location: 90-3075 A five-member panel of "outsiders" has recently examined the software architecture of DOE's EnergyPlus building energy simulation program with respect to robustness, computational efficiency, extensibility, maintainability, and usability. Two members of the panel will informally present conclusions from that study and then open the floor for discussion of the panel's recommendations. Barnaby is Vice-President of Research at software developer Wrightsoft Corporation in Lexington, MA and is Chair of the Review Panel. He has a B.A. in Engineering and Applied Physics from Harvard University and a M.Arch. from the University of California,

39

Modeling Supermarket Refrigeration Systems with EnergyPlus  

SciTech Connect (OSTI)

Supermarket refrigeration capabilities were first added to EnergyPlus in 2004. At that time, it was possible to model a direct expansion (DX) rack system with multiple refrigerated cases. The basic simulation software handles all the building energy uses, typically on a 5 to 10 minute time step throughout the period of interest. The original refrigeration module included the ability to model the sensible and latent interactions between the refrigerated cases and the building HVAC system, along with some basic heat recovery capabilities. Over the last few years, the refrigeration module has been expanded to handle more complex systems, such as secondary loops, shared condensers, cascade condensers, subcoolers, and walk-in coolers exchanging energy with multiple conditioned zones.

Stovall, Therese K [ORNL; Baxter, Van D [ORNL

2010-01-01T23:59:59.000Z

40

IFC HVAC interface to EnergyPlus - A case of expanded interoperability for energy simulation  

SciTech Connect (OSTI)

Tedious manual input of data that define a building, its systems and its expected pattern of use and operating schedules for building energy performance simulation has in the past diverted time and resources from productive simulation runs. In addition to its previously released IFCtoIDF utility that semiautomates the import of building geometry, the new IFC HVAC interface to EnergyPlus (released at the end of 2003) makes it possible to import and export most of the data that define HVAC equipment and systems in a building directly from and to other IFC compatible software tools. This reduces the manual input of other data needed for successful simulation with EnergyPlus to a minimum. The main purpose of this new interface is to enable import of HVAC equipment and systems definitions, generated by other IFC compatible software tools (such as HVAC systems design tools) and data bases, into EnergyPlus, and to write such definitions contained in EnergyPlus input files to the original IFC files from which building geometry was extracted for the particular EnergyPlus input. In addition, this interface sets an example for developers of other software tools how to import and/or export data other than building geometry from and/or into EnergyPlus. This paper describes the necessary simplifications and shortcuts incorporated in this interface, its operating environment, interface architecture, and the basic conditions and methodology for its use with EnergyPlus.

Bazjanac, Vladimir; Maile, Tobias

2004-03-29T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

EnergyPlus Run Time Analysis  

E-Print Network [OSTI]

net-zero energy buildings. EnergyPlus does sub-hourly calculationsnet zero energy buildings. EnergyPlus does sub-hourly whole building integrated heat balance calculations

Hong, Tianzhen

2009-01-01T23:59:59.000Z

42

EnergyPlus Overcomes (Computer) Language Barrier  

Broader source: Energy.gov [DOE]

For the first 17 years of its existence, EnergyPlus was written in the FORTRAN programming language. Now, DOE is releasing EnergyPlus 8.2.0, the first version written in C++.

43

MAPPING HVAC SYSTEMS FOR SIMULATION IN ENERGYPLUS  

E-Print Network [OSTI]

apps1.eere.energy.gov/buildings/energyplus/. Modelica, 2012.Modelica andthe Modelica Association Modelica Association [WWW

Basarkar, Mangesh

2013-01-01T23:59:59.000Z

44

Advancement of DOE's EnergyPlus Building Energy Simulation Payment  

SciTech Connect (OSTI)

EnergyPlus{sup TM} is a new generation computer software analysis tool that has been developed, tested, and commercialized to support DOE??s Building Technologies (BT) Program in terms of whole-building, component, and systems R&D (http://www.energyplus.gov). It is also being used to support evaluation and decision making of zero energy building (ZEB) energy efficiency and supply technologies during new building design and existing building retrofits. The 5-year project was managed by the National Energy Technology Laboratory and was divided into 5 budget period between 2006 and 2011. During the project period, 11 versions of EnergyPlus were released. This report summarizes work performed by an EnergyPlus development team led by the University of Central Florida??s Florida Solar Energy Center (UCF/FSEC). The team members consist of DHL Consulting, C. O. Pedersen Associates, University of Illinois at Urbana-Champaign, Oklahoma State University, GARD Analytics, Inc., and WrightSoft Corporation. The project tasks involved new feature development, testing and validation, user support and training, and general EnergyPlus support. The team developed 146 new features during the 5-year period to advance the EnergyPlus capabilities. Annual contributions of new features are 7 in budget period 1, 19 in period 2, 36 in period 3, 41 in period 4, and 43 in period 5, respectively. The testing and validation task focused on running test suite and publishing report, developing new IEA test suite cases, testing and validating new source code, addressing change requests, and creating and testing installation package. The user support and training task provided support for users and interface developers, and organized and taught workshops. The general support task involved upgrading StarTeam (team sharing) software and updating existing utility software. The project met the DOE objectives and completed all tasks successfully. Although the EnergyPlus software was enhanced significantly under this project, more enhancements are needed for further improvement to ensure that EnergyPlus is able to simulate the latest technologies and perform desired HAVC system operations for the development of next generation HVAC systems. Additional development will be performed under a new 5-year project managed by the National Renewable Energy Laboratory.

Lixing Gu; Don Shirey; Richard Raustad; Bereket Nigusse; Chandan Sharma; Linda Lawrie; Rich Strand; Curt Pedersen; Dan Fisher; Edwin Lee; Mike Witte; Jason Glazer; Chip Barnaby

2011-03-31T23:59:59.000Z

45

EnergyPlus Run Time Analysis  

E-Print Network [OSTI]

toward the goal of net zero energy buildings. EnergyPlusdesigns and low or net-zero energy buildings. EnergyPlus

Hong, Tianzhen

2009-01-01T23:59:59.000Z

46

Comparisons of HVAC Simulations between EnergyPlus and DOE-2.2 for Data Centers  

SciTech Connect (OSTI)

This paper compares HVAC simulations between EnergyPlus and DOE-2.2 for data centers. The HVAC systems studied in the paper are packaged direct expansion air-cooled single zone systems with and without air economizer. Four climate zones are chosen for the study - San Francisco, Miami, Chicago, and Phoenix. EnergyPlus version 2.1 and DOE-2.2 version 45 are used in the annual energy simulations. The annual cooling electric consumption calculated by EnergyPlus and DOE-2.2 are reasonablely matched within a range of -0.4percent to 8.6percent. The paper also discusses sources of differences beween EnergyPlus and DOE-2.2 runs including cooling coil algorithm, performance curves, and important energy model inputs.

Hong, Tianzhen; Sartor, Dale; Mathew, Paul; Yazdanian, Mehry

2008-08-13T23:59:59.000Z

47

REAL-TIME BUILDING ENERGY SIMULATION USING ENERGYPLUS AND THE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

REAL-TIME BUILDING ENERGY SIMULATION USING ENERGYPLUS AND THE REAL-TIME BUILDING ENERGY SIMULATION USING ENERGYPLUS AND THE BUILDING CONTROLS VIRTUAL TEST BED Xiufeng Pang 1 , Prajesh Bhattacharya 1 , Zheng O'Neill 2 , Philip Haves 1 , Michael Wetter 1 , and Trevor Bailey 2 1 Lawrence Berkeley National Laboratory, Berkeley, CA, USA 2 United Technologies Research Center, East Hartford, CT, USA ABSTRACT Most commercial buildings do not perform as well in practice as intended by the design and their performances often deteriorate over time. Reasons include faulty construction, malfunctioning equipment, incorrectly configured control systems and inappropriate operating procedures (Haves et al., 2001, Lee et al., 2007). To address this problem, the paper presents a simulation-based whole building performance monitoring tool that allows a

48

Energy Design Plugin: An EnergyPlus Plugin for SketchUp; Preprint  

SciTech Connect (OSTI)

This paper describes the Energy Design Plugin, a new software plugin that aims to integrate simulation as a tool during the earliest phases of the design process. The plugin couples the EnergyPlus whole-building simulation engine to the Google SketchUp drawing program.

Ellis, P. G.; Torcellini, P. A.; Crawley, D. B.

2008-08-01T23:59:59.000Z

49

EnergyPlus File Generator | Department of Energy  

Energy Savers [EERE]

Factsheet - This fact sheet discusses the EnergyPlus Example File Generator, a free, Web-based service which makes it easier to use EnergyPlus, DOE's building energy analysis...

50

Identifying and Resolving Issues in EnergyPlus and DOE-2 Window Heat Transfer Calculations  

SciTech Connect (OSTI)

Issues in building energy software accuracy are often identified by comparative, analytical, and empirical testing as delineated in the BESTEST methodology. As described in this report, window-related discrepancies in heating energy predictions were identified through comparative testing of EnergyPlus and DOE-2. Multiple causes for discrepancies were identified, and software fixes are recommended to better align the models with the intended algorithms and underlying test data.

Booten, C.; Kruis, N.; Christensen, C.

2012-08-01T23:59:59.000Z

51

EnergyPlus Weather Data | Open Energy Information  

Open Energy Info (EERE)

EnergyPlus Weather Data EnergyPlus Weather Data Jump to: navigation, search Tool Summary Name: EnergyPlus Weather Data Agency/Company /Organization: United States Department of Energy Focus Area: Solar, Wind Resource Type: Dataset Website: apps1.eere.energy.gov/buildings/energyplus/cfm/Weather_data.cfm EnergyPlus Weather Data Screenshot References: Weather Data[1] Summary "Weather data for more than 2100 locations are now available in EnergyPlus weather format - 1042 locations in the USA, 71 locations in Canada, and more than 1000 locations in 100 other countries throughout the world. The weather data are arranged by World Meteorological Organization region and Country. Africa (WMO Region 1) Asia (WMO Region 2) South America (WMO Region 3) North and Central America (WMO Region 4)

52

Modeling and simulation of HVAC Results in EnergyPlus  

E-Print Network [OSTI]

LBNL-5564E Modeling and simulation of HVAC Results in EnergyPlus Mangesh Basarkar, Xiufeng Pang;MODELING AND SIMULATION OF HVAC FAULTS IN ENERGYPLUS Mangesh Basarkar, Xiufeng Pang, Liping Wang, Philip not capture the significant impact of installation, operational and degradation HVAC system faults on actual

53

Building Technologies Office: Energy Modeling Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Modeling Software Modeling Software Information from energy simulation software is critical in the design of energy-efficient commercial buildings. The tools listed on this page are the product of Commercial Buildings Integration Program (CBI) research and are used in modeling current CBI projects. Modeling helps architects and building designers quickly identify the most cost-effective and energy-saving measures. Graphic of the EnergyPlus software logo. EnergyPlus - An award-winning new-generation building energy simulation program from the creators of BLAST and DOE-2. EnergyPlus models heating, cooling, lighting, ventilating, water, and other energy flows in buildings. OpenStudio - A free plugin for the SketchUp 3D drawing program. The plugin makes it easy to create and edit the building geometry in your EnergyPlus input files.

54

Software demonstration: Demand Response Quick Assessment Tool  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software demonstration: Demand Response Quick Assessment Tool Software demonstration: Demand Response Quick Assessment Tool Speaker(s): Peng Xu Date: February 4, 2008 - 12:00pm Location: 90-3122 The potential for utilizing building thermal mass for load shifting and peak demand reduction has been demonstrated in a number of simulation, laboratory, and field studies. The Demand Response Quick Assessment Tools developed at LBNL will be demonstrated. The tool is built on EnergyPlus simulation and is able to evaluate and compare different DR strategies, such as global temperature reset, chiller cycling, supply air temperature reset, etc. A separate EnergyPlus plotting tool will also be demonstrated during this seminar. Users can use the tool to test EnergyPlus models, conduct parametric analysis, or compare multiple EnergyPlus simulation

55

PPL EnergyPlus LLC | Open Energy Information  

Open Energy Info (EERE)

EnergyPlus LLC EnergyPlus LLC Jump to: navigation, search Name PPL EnergyPlus LLC Address Two North Ninth Street Place Allentown, Pennsylvania Zip 18101 Sector Services Product Green Power Marketer Website www.pplenergyplus.com/ Coordinates 40.601518°, -75.4759289° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.601518,"lon":-75.4759289,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

56

Building Technologies Office: EnergyPlus Energy Simulation Software  

Energy Savers [EERE]

interfaces, help create input files, and support computer-aided design. Contacts | Website Policies | U.S. Department of Energy | USA.gov Content Last Updated: October 30, 2013...

57

Energy Modeling Software | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Commercial Buildings » Energy Modeling Software Commercial Buildings » Energy Modeling Software Energy Modeling Software Information from energy simulation software is critical in the design of energy-efficient commercial buildings. The tools listed on this page are the product of Commercial Buildings Integration Program (CBI) research and are used in modeling current CBI projects. Modeling helps architects and building designers quickly identify the most cost-effective and energy-saving measures. Graphic of the EnergyPlus software logo. EnergyPlus - An award-winning new-generation building energy simulation program from the creators of BLAST and DOE-2. EnergyPlus models heating, cooling, lighting, ventilating, water, and other energy flows in buildings. OpenStudio - A free plugin for the SketchUp 3D drawing program. The

58

Simulating a Nationally Representative Housing Sample Using EnergyPlus  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Simulating a Nationally Representative Housing Sample Using EnergyPlus Simulating a Nationally Representative Housing Sample Using EnergyPlus Title Simulating a Nationally Representative Housing Sample Using EnergyPlus Publication Type Report LBNL Report Number LBNL-4420E Year of Publication 2011 Authors Hopkins, Asa S., Alexander B. Lekov, James D. Lutz, and Gregory J. Rosenquist Subsidiary Authors Energy Analysis Department Pagination 55 Date Published March 1 Publisher Lawrence Berkeley National Laboratory City Berkeley ISBN Number LBNL-4420E Abstract This report presents a new simulation tool under development at Lawrence Berkeley National Laboratory (LBNL). This tool uses EnergyPlus to simulate each single-family home in the Residential Energy Consumption Survey (RECS), and generates a calibrated, nationally representative set of simulated homes whose energy use is statistically indistinguishable from the energy use of the single-family homes in the RECS sample. This research builds upon earlier work by Ritchard et al. for the Gas Research Institute and Huang et al. for LBNL. A representative national sample allows us to evaluate the variance in energy use between individual homes, regions, or other subsamples; using this tool, we can also evaluate how that variance affects the impacts of potential policies.

59

Computer Modeling VRF Heat Pumps in Commercial Buildings using EnergyPlus  

SciTech Connect (OSTI)

Variable Refrigerant Flow (VRF) heat pumps are increasingly used in commercial buildings in the United States. Monitored energy use of field installations have shown, in some cases, savings exceeding 30% compared to conventional heating, ventilating, and air-conditioning (HVAC) systems. A simulation study was conducted to identify the installation or operational characteristics that lead to energy savings for VRF systems. The study used the Department of Energy EnergyPlus? building simulation software and four reference building models. Computer simulations were performed in eight U.S. climate zones. The baseline reference HVAC system incorporated packaged single-zone direct-expansion cooling with gas heating (PSZ-AC) or variable-air-volume systems (VAV with reheat). An alternate baseline HVAC system using a heat pump (PSZ-HP) was included for some buildings to directly compare gas and electric heating results. These baseline systems were compared to a VRF heat pump model to identify differences in energy use. VRF systems combine multiple indoor units with one or more outdoor unit(s). These systems move refrigerant between the outdoor and indoor units which eliminates the need for duct work in most cases. Since many applications install duct work in unconditioned spaces, this leads to installation differences between VRF systems and conventional HVAC systems. To characterize installation differences, a duct heat gain model was included to identify the energy impacts of installing ducts in unconditioned spaces. The configuration of variable refrigerant flow heat pumps will ultimately eliminate or significantly reduce energy use due to duct heat transfer. Fan energy is also studied to identify savings associated with non-ducted VRF terminal units. VRF systems incorporate a variable-speed compressor which may lead to operational differences compared to single-speed compression systems. To characterize operational differences, the computer model performance curves used to simulate cooling operation are also evaluated. The information in this paper is intended to provide a relative difference in system energy use and compare various installation practices that can impact performance. Comparative results of VRF versus conventional HVAC systems include energy use differences due to duct location, differences in fan energy when ducts are eliminated, and differences associated with electric versus fossil fuel type heating systems.

Raustad, Richard

2013-06-01T23:59:59.000Z

60

Duct Leakage Modeling in EnergyPlus and Analysis of Energy Savings from  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Duct Leakage Modeling in EnergyPlus and Analysis of Energy Savings from Duct Leakage Modeling in EnergyPlus and Analysis of Energy Savings from Implementing SAV with InCITeTM Title Duct Leakage Modeling in EnergyPlus and Analysis of Energy Savings from Implementing SAV with InCITeTM Publication Type Report LBNL Report Number LBNL-3525E Year of Publication 2010 Authors Wray, Craig P., and Max H. Sherman Publisher Lawrence Berkeley National Laboratory City Berkeley Keywords airflow, building, duct, energy, energy performance of buildings group, fan, hvac, indoor environment department, other, power, retrofits, simulation, system Abstract This project addressed two significant deficiencies in air-handling systems for large commercial building: duct leakage and duct static pressure reset. Both constitute significant energy reduction opportunities for these buildings. The overall project goal is to bridge the gaps in current duct performance modeling capabilities, and to expand our understanding of air-handling system performance in California large commercial buildings. The purpose of this project is to provide technical support for the implementation of a duct leakage modeling capability in EnergyPlus, to demonstrate the capabilities of the new model, and to carry out analyses of field measurements intended to demonstrate the energy saving potential of the SAV with InCITeTM duct static pressure reset (SPR) technology.A new duct leakage model has been successfully implemented in EnergyPlus, which will enable simulation users to assess the impacts of leakage on whole-building energy use and operation in a coupled manner. This feature also provides a foundation to support code change proposals and compliance analyses related to Title 24 where duct leakage is an issue. Our example simulations continue to show that leaky ducts substantially increase fan power: 10% upstream and 10% downstream leakage increases supply fan power 30% on average compared to a tight duct system (2.5% upstream and 2.5% downstream leakage). Much of this increase is related to the upstream leakage rather than to the downstream leakage. This does not mean, however, that downstream leakage is unimportant. Our simulations also demonstrate that ceiling heat transfer is a significant effect that needs to be included when assessing the impacts of duct leakage in large commercial buildings. This is not particularly surprising, given that "ceiling regain" issues have already been included in residential analyses as long as a decade ago (e.g., ASHRAE Standard 152); mainstream simulation programs that are used for large commercial building energy analyses have not had this capability until now. Our analyses of data that we collected during our 2005 tests of the SAV with InCITeTM duct static pressure reset technology show that this technology can substantially reduce fan power (in this case, by about 25 to 30%). Tempering this assessment, however, is that cooling and heating coil loads were observed to increase or decrease significantly depending on the time window used. Their impact on cooling and heating plant power needs to be addressed in future studies; without translating the coil loads to plant equipment energy use, it is not possible to judge the net impact of this SPR technology on whole-building energy use. If all of the loads had decreased, such a step would not be as necessary.

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

EnergyPlus Analysis Capabilities for Use in California Building Energy Efficiency Standards Development and Compliance Calculations  

E-Print Network [OSTI]

EnergyPlus does not have a swimming pool/spa model yet, butin 2009. The EnergyPlus swimming pool/spa models will allowNon-Res Need to add swimming pool/spa models to and Res

Hong, Tianzhen

2009-01-01T23:59:59.000Z

62

Department of Energy's Building Technologies Office Releases EnergyPlus V.  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Department of Energy's Building Technologies Office Releases EnergyPlus V. Department of Energy's Building Technologies Office Releases EnergyPlus V. 8.1 November 2013 November Special Focus: Energy Efficiency, Buildings and the Electric Grid EnergyPlus is the Department of Energy's Building Technologies Office's free, open-source whole-building energy simulation engine. Developed by a diverse team of building physics researchers and mechanical engineers at the National Labs and various consultancies, EnergyPlus is the engine behind a large and growing number of tools for the design of energy-efficient buildings and their HVAC systems, for compliance with energy-efficiency codes and standards, and for building certification and rating through programs like USGBC's LEED and DOE's Commercial Building Energy Asset Score. BTO has released an updated version of EnergyPlus with new features and

63

Technical Subtopic 2.1: Modeling Variable Refrigerant Flow Heat Pump and Heat Recovery Equipment in EnergyPlus  

SciTech Connect (OSTI)

The University of Central Florida/Florida Solar Energy Center, in cooperation with the Electric Power Research Institute and several variable-refrigerant-flow heat pump (VRF HP) manufacturers, provided a detailed computer model for a VRF HP system in the United States Department of Energy's (U.S. DOE) EnergyPlus? building energy simulation tool. Detailed laboratory testing and field demonstrations were performed to measure equipment performance and compare this performance to both the manufacturer's data and that predicted by the use of this new model through computer simulation. The project goal was to investigate the complex interactions of VRF HP systems from an HVAC system perspective, and explore the operational characteristics of this HVAC system type within a laboratory and real world building environment. Detailed laboratory testing of this advanced HVAC system provided invaluable performance information which does not currently exist in the form required for proper analysis and modeling. This information will also be useful for developing and/or supporting test standards for VRF HP systems. Field testing VRF HP systems also provided performance and operational information pertaining to installation, system configuration, and operational controls. Information collected from both laboratory and field tests were then used to create and validate the VRF HP system computer model which, in turn, provides architects, engineers, and building owners the confidence necessary to accurately and reliably perform building energy simulations. This new VRF HP model is available in the current public release version of DOE?s EnergyPlus software and can be used to investigate building energy use in both new and existing building stock. The general laboratory testing did not use the AHRI Standard 1230 test procedure and instead used an approach designed to measure the field installed full-load operating performance. This projects test methodology used the air enthalpy method where relevant air-side parameters were controlled while collecting output performance data at discreet points of steady-state operation. The primary metrics include system power consumption and zonal heating and cooling capacity. Using this test method, the measured total cooling capacity was somewhat lower than reported by the manufacturer. The measured power was found to be equal to or greater than the manufacturers indicated power. Heating capacity measurements produced similar results. The air-side performance metric was total cooling and heating energy since the computer model uses those same metrics as input to the model. Although the sensible and latent components of total cooling were measured, they are not described in this report. The test methodology set the thermostat set point temperature very low for cooling and very high for heating to measure full-load performance and was originally thought to provide the maximum available capacity. Manufacturers stated that this test method would not accurately measure performance of VRF systems which is now believed to be a true statement. Near the end of the project, an alternate test method was developed to better represent VRF system performance as if field installed. This method of test is preliminarily called the Load Based Method of Test where the load is fixed and the indoor conditions and unit operation are allowed to fluctuate. This test method was only briefly attempted in a laboratory setting but does show promise for future lab testing. Since variable-speed air-conditioners and heat pumps include an on-board control algorithm to modulate capacity, these systems are difficult to test. Manufacturers do have the ability to override internal components to accommodate certification procedures, however, it is unknown if the resulting operation is replicated in the field, or if so, how often. Other studies have shown that variable-speed air-conditioners and heat pumps do out perform their single-speed counterparts though these field studies leave as many questions as they do provide answers. The measure

Raustad, Richard; Nigusse, Bereket; Domitrovic, Ron

2013-09-30T23:59:59.000Z

64

Functional Mock-Up Unit Import in EnergyPlus For Co-Simulation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Functional Mock-Up Unit Import in EnergyPlus For Co-Simulation Functional Mock-Up Unit Import in EnergyPlus For Co-Simulation Title Functional Mock-Up Unit Import in EnergyPlus For Co-Simulation Publication Type Conference Proceedings LBNL Report Number LBNL-6413E Year of Publication 2013 Authors Nouidui, Thierry Stephane, Michael Wetter, and Wangda Zuo Conference Name 13th Conference of International Building Performance Simulation Date Published 08/2013 Conference Location Chambery, France Abstract This paper describes how to use the recently implemented Functional Mock-up Unit (FMU) for co-simulation import interface in EnergyPlus to link EnergyPlus with simulation tools packaged as FMUs. The interface complies with the Functional Mock-up Interface (FMI) for co-simulation standard version 1.0, which is an open standard designed to enable links between different simulation tools that are packaged as FMUs. This article starts with an introduction of the FMI and FMU concepts. We then discuss the implementation of the FMU import interface in EnergyPlus. After that, we present two use cases. The first use case is to model a HVAC system in Modelica, export it as an FMU, and link it to a room model in EnergyPlus. The second use case is an extension of the first case where a shading controller is modeled in Modelica, exported as an FMU, and used in the EnergyPlus room model to control the shading device of one of its windows. In both cases, the FMUs are imported into EnergyPlus which models the building envelope and manages the data-exchange between the envelope and the systems in the FMUs during run-time.

65

Heat Pump Water Heating Modeling in EnergyPlus  

Broader source: Energy.gov (indexed) [DOE]

Heat Pump Water Heater Modeling Heat Pump Water Heater Modeling in EnergyPlus Building America Residential Energy Efficiency Stakeholder Meeting Eric Wilson Craig Christensen March 1, 2012 2 Modeling Issues Results Motivation Heat Pump Water Heater Modeling... 3 Gap: Existing analysis tools cannot accurately model HPWHs with reasonable runtime. 4 What have we achieved so far? Laboratory Evaluations 14 x Field Monitoring 5 Closing the Gap Laboratory Evaluations 6 sec timestep hourly timestep 14 x Field Monitoring CARB 6 Why is modeling important? * Performance varies: Can't just use EF * System interaction o HPWH affects building heating and cooling o Space conditions affect HPWH performance 7 Modeling Goals * Manage Risks o Accuracy o Run time o Occupant satisfaction * Flexibility to explore the effects of:

66

Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software screen captures and equations Software screen captures and equations Software Software developed by EETD researchers for energy-efficient buildings, and electricity grid. Download free or for a nominal licensing fee. EETD scientists develop software to help design more energy-efficient buildings, audit energy use in buildings, examine the economics of sustainable projects, and model components of building systems. Most EETD software and documentation is available for download and public use. Building Controls Virtual Test Bed The Building Controls Virtual Test Bed (BCVTB) is a software environment that allows expert users to couple different simulation programs for co-simulation, and to couple simulation programs with actual hardware. Version Download Supported? Website 1.1.0 Yes BCVTB

67

EnergyPlus Analysis Capabilities for Use in California Building Energy Efficiency Standards Development and Compliance Calculations  

E-Print Network [OSTI]

Thermal Energy Storage capability to EnergyPlus. Thermal Energy Storage The ACMchiller-based thermal energy storage (TES) as an optional

Hong, Tianzhen

2009-01-01T23:59:59.000Z

68

EnergyPlus Boosts Building Efficiency with Help from Autodesk | Department  

Broader source: Energy.gov (indexed) [DOE]

EnergyPlus Boosts Building Efficiency with Help from Autodesk EnergyPlus Boosts Building Efficiency with Help from Autodesk EnergyPlus Boosts Building Efficiency with Help from Autodesk November 21, 2013 - 1:55pm Addthis Amir Roth Amir Roth Technology Development Manager, Building Technologies Office KEY FACTS Building energy simulation is the calculation of energy used to heat, cool, light, and ventilate a building given a description of the building and its operation. Building energy simulation plays important roles in the design of energy-efficient buildings, in building energy-efficiency codes and standards, in voluntary rating programs like LEED and GreenGlobes, and energy-efficiency incentive programs. For decades, the Energy Department's Building Technologies Office has been developing free, world-class simulation tools to help industry improve

69

Advanced Dehumidification Analysis on Building America Homes Using EnergyPlus: Preprint  

SciTech Connect (OSTI)

A parametric study was conducted using EnergyPlus version 4.0 to analyze the impact of various dehumidification equipment and control strategies on a typical mid-1990's reference home, a 2006 IECC home, and a high-performance home in a hot humid climate.

Fang, X.; Winkler, J.; Christensen, D.

2010-08-01T23:59:59.000Z

70

Functional Mock-Up Unit Import in EnergyPlus For Co-Simulation  

E-Print Network [OSTI]

FOR CO-SIMULATION Thierry Stephane Nouidui1 , Michael Wetter1 , Wangda Zuo2* 1 Lawrence Berkeley NationalLBNL-6413E Functional Mock-Up Unit Import in EnergyPlus For Co-Simulation Authors, Thierry Stephane by the United States Government. While this document is believed to contain correct information, neither

71

Comparison of DOE-2.1E with Energyplus and TRNSYS for Ground Coupled Residential Buildings in Hot anf Humid Climates Stage 1  

E-Print Network [OSTI]

ESL-TR-11-12-08 COMPARISON OF DOE-2.1E WITH ENERGYPLUS AND TRNSYS FOR GROUND COUPLED RESIDENTIAL BUILDINGS IN HOT AND HUMID CLIMATES STAGE 1 Literature Survey on Slab-on-grade Heat Transfer Models of DOE-2, EnergyPlus and TRNSYS... .................................................................................................................... 4 2. Introduction ........................................................................................................................................... 4 3. Literature Survey on Slab-on-grade Models of DOE-2, EnergyPlus and TRNSYS...

Andolsun, S.; Culp, C.

2011-01-01T23:59:59.000Z

72

NERSC Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Software on the NERSC computers includes the vendor-supplied operating systems and programming environments as well as third-party products installed by NERSC....

73

Tax Deduction Qualified Software: EnergyPlus version 7.0.0.036  

Broader source: Energy.gov (indexed) [DOE]

developer. Internal Revenue Code 179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The...

74

Module Development and Simulation of the Variable Refrigerant Flow Air Conditioning System under Cooling Conditions in Energyplus  

E-Print Network [OSTI]

As a high-efficiency air conditioning scheme, the variable refrigerant flow (VRF) air-conditioning system is finding its way into medium-sized office buildings. Based on a generic dynamic building energy simulation environment, EnergyPlus, a new...

Zhou, Y.; Wu, J.; Wang, R.; Shiochi, S.

2006-01-01T23:59:59.000Z

75

Using EnergyPlus for California Title-24 compliancecalculations  

SciTech Connect (OSTI)

For the past decade, the non-residential portion of California's Title-24 building energy standard has relied on DOE-2.1E as the reference computer simulation program for development as well as compliance. However, starting in 2004, the California Energy Commission has been evaluating the possible use of Energy Plus as the reference program in future revisions of Title-24. As part of this evaluation, the authors converted the Alternate Compliance Method (ACM) certification test suite of 150 DOE-2 files to Energy Plus, and made parallel DOE-2 and Energy Plus runs for this extensive set of test cases. A customized version of DOE-2.1E named doe2ep was developed to automate the conversion process. This paper describes this conversion process, including the difficulties in establishing an apples-to-apples comparison between the two programs, and summarizes how the DOE-2 and Energy Plus results compare for the ACM test cases.

Huang, Joe; Bourassa, Norman; Buhl, Fred; Erdem, Ender; Hitchcock, Rob

2006-08-26T23:59:59.000Z

76

Modeling PCM-Enhanced Insulation System and Benchmarking EnergyPlus against Controlled Field Data  

SciTech Connect (OSTI)

Phase-change materials (PCM) used in building envelopes appear to be a promising technology to reduce energy consumption and reduce/shift peak load. However, due to complexity in modeling the dynamic behavior of PCMs, current modeling tools either lack an accurate way of predicting the performance and impact of PCMs in buildings or validation of predicted or measured performance is not available. This paper presents a model of a PCM-enhanced dynamic-insulation system in EnergyPlus (E+) and compares the simulation results against field-measured data. Laboratory tests to evaluate thermal properties and to characterize the PCM and PCM-enhanced cellulose insulation system are also presented in this paper. Results indicate that the predicted daily average heat flux through walls from the E+ simulation was within 9% of field measured data. Future analysis will allow us to predict annual energy savings from the use of PCM in buildings.

Shrestha, Som S [ORNL] [ORNL; Miller, William A [ORNL] [ORNL; Stovall, Therese K [ORNL] [ORNL; Desjarlais, Andre Omer [ORNL] [ORNL; Childs, Kenneth W [ORNL] [ORNL; Porter, Wallace D [ORNL] [ORNL; Bhandari, Mahabir S [ORNL] [ORNL; Coley, Steven J [ORNL] [ORNL

2011-01-01T23:59:59.000Z

77

Using EnergyPlus to Simulate the Dynamic Response of a Residential Building to Advanced Cooling Strategies: Preprint  

SciTech Connect (OSTI)

This study demonstrates the ability of EnergyPlus to accurately model complex cooling strategies in a real home with a goal of shifting energy use off peak and realizing energy savings. The house was retrofitted through the Sacramento Municipal Utility District's (SMUD) deep energy retrofit demonstration program; field tests were operated by the National Renewable Energy Laboratory (NREL). The experimental data were collected as part of a larger study and are used here to validate simulation predictions.

Booten, C.; Tabares-Velasco, P. C.

2012-08-01T23:59:59.000Z

78

A Variable Refrigerant Flow Heat Pump Computer Model in EnergyPlus  

SciTech Connect (OSTI)

This paper provides an overview of the variable refrigerant flow heat pump computer model included with the Department of Energy's EnergyPlusTM whole-building energy simulation software. The mathematical model for a variable refrigerant flow heat pump operating in cooling or heating mode, and a detailed model for the variable refrigerant flow direct-expansion (DX) cooling coil are described in detail.

Raustad, Richard A. [Florida Solar Energy Center

2013-01-01T23:59:59.000Z

79

The Environment for the Software Engineer  

Science Journals Connector (OSTI)

The fundamental aspects of education apply to every discipline, including software engineering, which has the objective of producing high ... software products and software tools. When software engineering emerge...

A. Nico Habermann

1987-01-01T23:59:59.000Z

80

Comparison of DOE-2.1E with Energyplus and TRNSYS for Ground Coupled Residential Buildings in Hot anf Humid Climates Stage 4  

E-Print Network [OSTI]

ESL-TR-12-02-02 COMPARISON OF DOE-2.1E WITH ENERGYPLUS AND TRNSYS FOR GROUND COUPLED RESIDENTIAL BUILDINGS IN HOT AND HUMID CLIMATES STAGE 4 Fully Loaded IECC Compliant Slab-on-grade Houses in the Four U.S. Climates A Report...F/Btu) Rfic resistance of the fictitious insulation layer (hr-ft2-oF/Btu) GI ground isolated EP modeled with EnergyPlus D2 modeled with DOE-2 TR modeled with TRNSYS GCW ground coupled with Winkelmanns slab-on-grade model GCS ground coupled with Slab...

Andolsun, S.; Culp, C.

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Software Engineering Model Schedule -(with CS 1131) example only; actual schedule may vary; see your academic dept. Includes 3 units of co-curricular activities.  

E-Print Network [OSTI]

Software Engineering Model Schedule - (with CS 1131) example only; actual schedule may vary; see FALL SPRING FALL SPRING CS 1000 1 CS 2321 3 CS 1141 2 CS 3141 3 CS 1131 5 MA 2160 4 CS 2311 3 CS 3421 4 Activity (1) Total 17 Total 15 Total 14-15 Total 16-17 3rd Year 4th Year FALL SPRING FALL SPRING CS 3311 3

82

Software Engineering Model Schedule -(Starting with CS 1121) example only; actual schedule may vary; see your academic dept. Includes 3 units of co-curricular activities.  

E-Print Network [OSTI]

Software Engineering Model Schedule - (Starting with CS 1121) example only; actual schedule may Year 2nd Year FALL SPRING FALL SPRING CS 1000 1 CS 1122 3 CS 1141 2 CS 2311 3 CS 1121 3 MA 2160 4 CS Cocurricular Activity (1) Total 15 Total 15 Total 14-15 Total 16-17 3rd Year 4th Year FALL SPRING FALL SPRING

83

Underfloor vs. overhead: a comparative analysis of air distribution systems using the EnergyPlus simulation software  

E-Print Network [OSTI]

REGULAR, E8 - 5 / 8 IN PLASTER OR GYP BOARD, ! - NameSouthWall, E8 - 5 / 8 IN PLASTER OR GYP BOARD; CONSTRUCTION,NorthWall, E8 - 5 / 8 IN PLASTER OR GYP BOARD; ! Name !

Daly, A.

2006-01-01T23:59:59.000Z

84

ESTSC - Software Best Practices  

Office of Scientific and Technical Information (OSTI)

Scientific and Technical Software Best Practices Scientific and Technical Software Best Practices December 2010 Table of Contents 1.0 Introduction 2.0 Responsibilities 2.1 OSTI/ESTSC 2.2 SIACs 2.3 Software Submitting Sites/Creators 2.4 Software Sensitivity Review 3.0 Software Announcement and Submission 3.1 STI Software Appropriate for Announcement 3.2 Announcement/Submission Criteria 3.3 Software Categories 3.4 Announcement Notice Metadata Elements 4.0 Software Access 4.1 Foreign Access to Software 4.2 Copyrighted Software 4.3 Software Licenses 4.4 Distribution Statement and Disclaimer Attachments Attachment 1 Attachment 2 1.0 INTRODUCTION Department of Energy (DOE) Order (O) 241.1B requires that scientific and technical information (STI), including scientific and technical computer software, be made broadly available, within applicable laws and

85

Comparison of Demand Response Performance with an EnergyPlus Model in a Low Energy Campus Building  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4E 4E Comparison of Demand Response Performance with an EnergyPlus Model in a Low Energy Campus Building J.H. Dudley, D. Black, M. Apte, M.A. Piette Lawrence Berkeley National Laboratory P. Berkeley University of California, Berkeley May 2010 Presented at the 2010 ACEEE Summer Study on Energy Efficiency in Buildings, Pacific Grove, CA, August 15-20, 2010, and published in the Proceedings DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information,

86

Building Energy Software Tools Directory: DOE Sponsored Tools  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE Sponsored Tools DOE Sponsored Tools The Department of Energy sponsors continued development of a variety of building energy software tools. See the following for more information about software tools now under development: Whole-Building Energy Performance Simulation EnergyPlus A new-generation building energy simulation program from the creators of BLAST and DOE-2. DOE-2 An hourly, whole-building energy analysis program which calculates energy performance and life-cycle cost of operation. The current version is DOE-2.1E. Building Design Advisor Provides building decision-makers with the energy-related information they need beginning in the initial, schematic phases of building design through the detailed specification of building components and systems. SPARK Models complex building envelopes and mechanical systems that are beyond

87

National Energy Software Center  

SciTech Connect (OSTI)

A short introduction is given to the services of the National Energy Software Library at the Argonne National Laboratory. The objectives, history, and software collection of the center are presented. Information on ordering from the software collection of the library is also included. 4 refs., 3 tabs. (DWL)

Eyberger, L.R.

1986-01-01T23:59:59.000Z

88

Comparison of DOE-2.1E with Energyplus and TRNSYS for Ground Coupled Residential Buildings in Hot anf Humid Climates Stage 2  

E-Print Network [OSTI]

decades in design studies, analysis of retrofit opportunities and developing and testing standards [4]. In 1996, the U.S.D.O.E.1 initiated support for the development of EnergyPlus, which was a new program based on the best features of DOE-2 and BLAST..., SUNREL and VA114 for various slab-on-grade construction using the IEA7 SHC8 Task 22 test cases. For these test cases, the annual ground coupling heating load results of HOT3000, SUNREL and VA114 showed up to ~52% disagreement with the Energy...

Andolsun, S.; Culp, C.

2011-01-01T23:59:59.000Z

89

Building Energy Software Tools Directory: ZEBO  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ZEBO ZEBO ZEBO is a decision support tool for the study and design of net zero energy buildings (NZEBs) in hot climates during early design phases. The aim of this tool is to facilitate and integrate the use of energy building performance simulation for architects. The tool embraces a graphical user interface for EnergyPlus. It allows for sensitivity analysis of possible variations of NZEB design parameters and elements during the early design phases in hot climates. Its added values reside in its ability to inform the decision before decisions are made about NZEB design. The tool is contextual and is based on an embedded benchmark model and database for Egyptian residential buildings, which includes local materials and construction and allows the generation of code-compliant design

90

Treating business dimension in software ecosystems  

Science Journals Connector (OSTI)

Software Ecosystems (SECOs) have emerged as an approach to improve Software Engineering (SE) in industry considering relations among companies and stakeholders. Companies have opened up their platforms and artifacts to others, including partners and ... Keywords: component-based software engineering, software ecosystems, software reuse, value-based software engineering

Rodrigo Pereira dos Santos; Cludia Werner

2011-11-01T23:59:59.000Z

91

Software Tools Wardriving Software  

E-Print Network [OSTI]

Soft TamoGraph: n http://www.tamos.com/products/wifi-site- survey/wireless.php?r1=google&r2=awd_tg p Air://www.aerohive.com/planner p AirTight Planner: n http://www.airtightnetworks.com/home/ products/airtight-planner.html p Air http://www.netstumbler.com/ #12;Site Survey Software p Ekahau HeatMapper: n http://www.ekahau.com/products

Lo Cigno, Renato Antonio

92

Software Providers  

Broader source: Energy.gov [DOE]

Software providers interested in linking their software to the Home Energy Scoring Tool can do so via an application programming interface (API). By licensing the Home Energy Score API, third-party...

93

Software Tools  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Tools WINDOW for analyzing window thermal and optical performance THERM for analyzing two-dimensional heat transfer through building products Optics for analyzing optical properties of glazing systems International Glazing Database Optical data for glazing products used by WINDOW 5.2 and Optics5.1 including NFRC approved products Complex Glazing Database A database of shading materials and systems, such as roller shades and venetian blinds, that can be used by WINDOW 6 to calculate thermal and optical characteristics of window products with these shading systems. COMFEN A PC Program for calculating the heating and cooling energy use, and visual and thermal comfort, of commercial building facades. RESFEN A PC program for calculating the heating and cooling energy use of windows in residential buildings

94

IBM Software Design and development  

E-Print Network [OSTI]

IBM Software Design and development Thought Leadership White Paper Disciplined Agile Delivery software development paradigm. This trend is also echoed in other industry studies, including one con expensive and risky. It is time for a new genera- tion of agile process framework. #12;3IBM Software Here

Balmelli, Laurent

95

Scientific Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science & Education: Science & Education: Science Highlights Conferences Seminars & Meetings Publications Annual Reports APS Upgrade Courses and Schools Graduate Programs Scientific Software Subscribe to APS Recent Publications rss feed Scientific Software Scientists and researchers at the APS develop custom scientific software to help with acquisition and analysis of beamline data. Several packages are available for a variety of platforms and uses. General Diffraction Powder Diffraction Crystallography Synchrotron Radiation / Optical Elements Time-Resolved EXAFS Visualization / Data Processing Detector Controls General Diffraction fprime FPRIME/Absorb This provides utilities for computing approximate x-ray scattering cross sections (f, f' and f") for individual elements using the Cromer & Liberman

96

Buffalo Software | Open Energy Information  

Open Energy Info (EERE)

Software Software Jump to: navigation, search Logo: Buffalo Software Name Buffalo Software Place Broomfield Zip 80020 Country United States Sector Buildings Product Energy Databus Year founded 2009 Company Type For Profit Company Ownership Private Technology Buffalo Software offers services supporting the NREL Energy Databus including installation, feature development and support plans. Phone number 303-517-8902 Website http://buffalosw.com Region Rockies Area References Energy Databus[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Buffalo Software is a company based in Broomfield. References ↑ "Energy Databus" Retrieved from "http://en.openei.org/w/index.php?title=Buffalo_Software&oldid=651569"

97

Software Developers  

Broader source: Energy.gov [DOE]

Because SEED will provide a common, open-source data framework, software developers will be able to write applications that access the data in a consistent way (with proper permissions), or build functionalities onto the SEED platform in a replicable way.

98

An integrated energyemergy approach to building form optimization: Use of EnergyPlus, emergy analysis and Taguchi-regression method  

Science Journals Connector (OSTI)

Abstract This research presents a new methodology of environmental building design with an integrated energyemergy (spelled with an m) approach to study building form optimization in the schematic phases. In architecture, selection of sustainability assessment methods critically affects design goals, favoring or restricting choices designers can make. A building subsumes matter and energy to support human lives, but current building performance indicators are still hard to equate technical sides and human dominant sides of various scales in a synthetic metric. Moreover, in order to achieve global sustainability in a building, as a part of the whole built environment, it is necessary to integrate energy and environmental impacts at the highest scope of analysis. Emergy analysis coupled with building energy simulation can be suggested as a holistic indicator for architectural design process. To test the proposed method, a pilot study with a mid-size office building evaluates the consequences of early design decisions such as basic geometry, aspect ratio, window-wall ratio, construction types, etc. The integrated energyemergy approach to building form optimization consists of three modules namely, Building Energy Simulation (BES) module, Building \\{EMergy\\} Analysis (BEMA) module, and (iii) MetaModel Development (MMD) module. The BES module uses the EnergyPlus tool for whole building energy analysis, while the BEMA module employs analytical methods to estimate emergy quantities, and the MMD module employs the Taguchi method to develop a metamodel for faster and easier whole building emergy simulation. The metamodel developed using Taguchi-ANOVA method for building form optimization was validated with analytical test results to accelerate environmental design decision-making. This study demonstrates possibility of wider applications of emergy synthesis to building energy research and facilitates practical use of emergy simulation in the environmental design process.

Hwang Yi; Ravi S. Srinivasan; William W. Braham

2015-01-01T23:59:59.000Z

99

NERSC Modules Software Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Environment » Modules Environment Environment » Modules Environment Modules Software Environment NERSC uses the module utility to manage nearly all software. There are two huge advantages of the module approach: NERSC can provide many different versions and/or installations of a single software package on a given machine, including a default version as well as several older and newer versions; and Users can easily switch to different versions or installations without having to explicitly specify different paths. With modules, the MANPATH and related environment variables are automatically managed. Users simply ``load'' and ``unload'' modules to control their environment. The module utility consists of two parts: the module command itself and the modulefiles on which it operates. Module Command

100

Software: our quest for excellence. Honoring 50 years of software history, progress, and process  

SciTech Connect (OSTI)

The Software Quality Forum was established by the Software Quality Assurance (SQA) Subcommittee, which serves as a technical advisory group on software engineering and quality initiatives and issues for DOE`s quality managers. The forum serves as an opportunity for all those involved in implementing SQA programs to meet and share ideas and concerns. Participation from managers, quality engineers, and software professionals provides an ideal environment for identifying and discussing issues and concerns. The interaction provided by the forum contributes to the realization of a shared goal--high quality software product. Topics include: testing, software measurement, software surety, software reliability, SQA practices, assessments, software process improvement, certification and licensing of software professionals, CASE tools, software project management, inspections, and management`s role in ensuring SQA. The bulk of this document consists of vugraphs. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

NONE

1997-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Software fault avoidance issues  

Science Journals Connector (OSTI)

This article aims to discuss various issues of software fault avoidance. Software fault avoidance aims to produce fault free software through various approaches having the common objective of reducing the number of latent defects in software programs.

Goutam Kumar Saha

2006-11-01T23:59:59.000Z

102

Software aspects of energy management systems  

SciTech Connect (OSTI)

This paper is intended to serve the need for an understanding of the role which software plays in energy management systems (EMS), and of the considerations involved in designing, implementing and maintaining such systems. The paper begins with a brief elementary examination of what software is and the types of basic functions it typically performs in EMS applications. Various aspects of EMS software are then explained and discussed, including software architecture, programming language, operating system, data base management, man-machine interface, application software, and communications. In addition to providing a tutorial on the composition and content of EMS software, the paper addresses several related questions, such as the reasons for choosing one programming language over another, the effect of system size on software factors, the extent to which off-the-shelf software components can and should be incorporated in EMS, and the relationship of software to the overall user interface with the systems.

Stinaff, R.D.

1983-06-01T23:59:59.000Z

103

Software Update Recovery for Wireless Sensor Networks  

E-Print Network [OSTI]

mechanism that uses loss-of- control to provide high-reliability, low energy, software updates, includingSoftware Update Recovery for Wireless Sensor Networks Stephen Brown1 and Cormac J. Sreenan2 1 Laboratory, University College Cork, Ireland Abstract. Updating software over the network is important

Sreenan, Cormac J.

104

VMS software for the Jorway-411 interface  

SciTech Connect (OSTI)

This report describes a Software Package used to access CAMAC through the Jorway-411 Interface, for use on VAX/VMS systems. The software can be used to access parallel and/or serial CAMAC branch highways, and multiple Jorways may be connected to the VAX UNIBUS or MicroVax QBUS. The software available includes a VAX/VMS device driver for the JORWAY-411 and support routines and programs that access the driver. The software is accompanied by extensive documentation.

Dorries, T.; Moore, C.; Pordes, R.; White, V.

1987-05-01T23:59:59.000Z

105

Specifications for thesaurus software  

Science Journals Connector (OSTI)

Specifications are presented for software designed to support manual development and maintenance of information retrieval thesauri. The specifications are intended to support both evaluation of existing packages for acquisition and design of custom software. Specialized requirements of thesaurus support are emphasized over more general database management requirements. Requirements for integration with larger systems and for the user interface are summarized. Relationships specified by the ANSI standard should be supported, and the relationships should be validated to avoid introduction of conflicting relationships. Flexibility in availability of note and date fields is important, and where required, term classifications should be available. Maintenance procedures should include provision for feedback on the impact of changes, as well as appropriate levels of approval for changes. A wide variety of online displays and printed reports are required, including but not limited to alphabetical, hierarchical, and rotated. In addition, it is desirable to be able to search the thesaurus database with such capabilities as Boolean logic and proximity operators.

Jessica L. Milstead

1991-01-01T23:59:59.000Z

106

MotorMaster+ Software Tool Brochure  

Broader source: Energy.gov [DOE]

This brochure provides information on AMO's MotorMaster+ software tool, including how it works, next steps, and how to access it.

107

Software Quality Assurance for Nuclear Safety Systems  

SciTech Connect (OSTI)

The US Department of Energy has undertaken an initiative to improve the quality of software used to design and operate their nuclear facilities across the United States. One aspect of this initiative is to revise or create new directives and guides associated with quality practices for the safety software in its nuclear facilities. Safety software includes the safety structures, systems, and components software and firmware, support software and design and analysis software used to ensure the safety of the facility. DOE nuclear facilities are unique when compared to commercial nuclear or other industrial activities in terms of the types and quantities of hazards that must be controlled to protect workers, public and the environment. Because of these differences, DOE must develop an approach to software quality assurance that ensures appropriate risk mitigation by developing a framework of requirements that accomplishes the following goals: {sm_bullet} Ensures the software processes developed to address nuclear safety in design, operation, construction and maintenance of its facilities are safe {sm_bullet} Considers the larger system that uses the software and its impacts {sm_bullet} Ensures that the software failures do not create unsafe conditions Software designers for nuclear systems and processes must reduce risks in software applications by incorporating processes that recognize, detect, and mitigate software failure in safety related systems. It must also ensure that fail safe modes and component testing are incorporated into software design. For nuclear facilities, the consideration of risk is not necessarily sufficient to ensure safety. Systematic evaluation, independent verification and system safety analysis must be considered for software design, implementation, and operation. The software industry primarily uses risk analysis to determine the appropriate level of rigor applied to software practices. This risk-based approach distinguishes safety-critical software and applies the highest level of rigor for those systems. DOE has further defined a risk approach to nuclear safety system software consistent with the analyses required for operation of nuclear facilities. This requires the grading of software in terms of safety class and safety significant structures, systems and components (SSCs). Safety-class SSCs are related to public safety where as safety-significant SSCs are identified for specific aspects of defense-in-depth and worker safety. Industry standards do not directly categorize nuclear safety software and DOE sites are not consistent in their approach to nuclear safety software quality assurance. DOE is establishing a more detailed graded approach for software associated with safety class and safety significant systems. This paper presents the process and results that DOE utilized to develop a detailed classification scheme for nuclear safety software.

Sparkman, D R; Lagdon, R

2004-05-16T23:59:59.000Z

108

Motivation in software engineering industrial practice: A cross-case analysis of two software organisations  

Science Journals Connector (OSTI)

Context: The research about motivation in software engineering has provided important insights into characterizing factors and outcomes related to motivation. However, the complex relationships among these factors, including the moderating and mediating ... Keywords: Meta-ethnography, Motivation, Multi-case replication design, Qualitative research, Software engineer, Software engineering

A. Csar C. Frana; Fabio Q. B. Da Silva; Adelnei De L. C. Felix; David E. S. Carneiro

2014-01-01T23:59:59.000Z

109

Designing security into software  

E-Print Network [OSTI]

When people talk about software security, they usually refer to security applications such as antivirus software, firewalls and intrusion detection systems. There is little emphasis on the security in the software itself. ...

Zhang, Chang Tony

2006-01-01T23:59:59.000Z

110

Designing supportability into software  

E-Print Network [OSTI]

Background: Despite the identification of a "software crisis" in the 1960s, large software projects are full of defects even today [19]. These defects cause the software to behave unexpectedly. The cause generally is ...

Shirolkar, Prashant A., 1973-

2004-01-01T23:59:59.000Z

111

AIDE: internal dosimetry software  

Science Journals Connector (OSTI)

......Technology to Radiation Protection...Occupational Radiation Doses Due...AEA. IAEA Safety Reports Series...dosimetry software. | AIDE...in the IAEA Safety Reports Series...Respiratory System radiation effects Software Software Design......

L. Bertelli; D. R. Melo; J. Lipsztein; R. Cruz-Suarez

2008-07-01T23:59:59.000Z

112

Software Sensitivity Review | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

Sensitivity Review Sensitivity Review Print page Print page Email page Email page As required by DOE O 241.1B, software submitting sites are to review all software for classified and controlled unclassified information, including Personally Identifiable Information (PII), according to approved local procedures. Prior to announcing and/or submitting software to ESTSC or a SIAC, or disseminating software publicly, the submitting site should conduct reviews to determine the appropriate Intellectual Property or other category of sensitivity. Those categories include: Unlimited Announcement - Software which be made available to all requesters; government, public and foreign (sensitive countries require Headquarters approval). Open Source Software - Computer software that is distributed under a

113

CANbus. , Testing software  

E-Print Network [OSTI]

, , CANbus. , , . , . , , . Testing software for devices with CANbus interface functions of software, results of testing and examples of real applications. © . .. #12

Kozak, Victor R.

114

What is software architecture?  

Science Journals Connector (OSTI)

Currently there is no consensus on what exactly software architecture is or where the boundary between software architecture design and application design lies. In this paper the concept of a software architecture is analyzed from a number of different ... Keywords: reference architecture, software architecture

Fritz Solms

2012-10-01T23:59:59.000Z

115

Producing reliable software: an experiment  

Science Journals Connector (OSTI)

A customer of high assurance software recently sponsored a software engineering experiment in which a small real-time software system was developed concurrently by two popular software development methodologies. One company specialized in the state-of-the-practice ... Keywords: capability maturity model, cleanroom certification, formal methods, software development methodologies, software engineering experiment, software process and product metrics, software reliability

Carol Smidts; Xin Huang; James C. Widmaier

2002-04-01T23:59:59.000Z

116

Software design for panoramic astronomical pipeline processing  

E-Print Network [OSTI]

We describe the software requirement and design specifications for all-sky panoramic astronomical pipelines. The described software aims to meet the specific needs of super-wide angle optics, and includes cosmic-ray hit rejection, image compression, star recognition, sky opacity analysis, transient detection and a web server allowing access to real-time and archived data. The presented software is being regularly used for the pipeline processing of 11 all-sky cameras located in some of the world's premier observatories. We encourage all-sky camera operators to use our software and/or our hosting services and become part of the global Night Sky Live network.

Lior Shamir; Robert J. Nemiroff; David O. Torrey; Wellesley E. Pereira

2005-11-23T23:59:59.000Z

117

Pump apparatus including deconsolidator  

DOE Patents [OSTI]

A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

2014-10-07T23:59:59.000Z

118

REScheck Software User's Guide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

REScheck Software REScheck Software User's Guide Building Energy Codes Program Table Of Contents Overview ................................................................................... 1 Tutorials ................................................................................. 2 Table Columns and Rows ............................................................. 3 Rows ...................................................................................... 3 Columns ................................................................................. 5 Project Information ..................................................................... 7 Location.................................................................................. 7 Project Type (2006 IECC) ..........................................................

119

SPEAR 3 Commissioning Software  

SciTech Connect (OSTI)

The short SPEAR 3 startup time required precommissioned software for machine setup, beam measurements and data analysis. To accomplish this goal, we used Matlab with the Accelerator Toolbox (AT), the Channel Access Toolbox (MCA) and Middle Layer software to integrate code and streamline production. This paper outlines the software architecture, describes the Middle Layer component and provides examples from SPEAR 3 commissioning.

Corbett, W.J.; Portmann, G.J.; Safranek, J.A.; Terebilo, A.; /SLAC, SSRL

2005-05-09T23:59:59.000Z

120

Universal software safety standard  

Science Journals Connector (OSTI)

This paper identifies the minimum subset required for a truly universal safety-critical software standard. This universal software standard could be used in but is not limited to the following application domains: commercial, military and space ... Keywords: software safety, system safety, validation, verification

P. V. Bhansali

2005-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

RETROSPECTIVE: Software Pipelining  

E-Print Network [OSTI]

- cialized hardware designed to support software pipelining. In the meantime, trace scheduling was touted compiler with software pipelining for the polycyclic architecture, which had a novel crossbar whose crossRETROSPECTIVE: Software Pipelining: An Effective Scheduling Technique for VLIW Machines Monica S

Pratt, Vaughan

122

GENII Version 2 Software Design Document  

SciTech Connect (OSTI)

This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying appropriate risk factors to the effective dose equivalent or organ dose. In addition, Version 2 uses cancer risk factors from Federal Guidance Report 13 to estimate risk to specific organs or tissues.

Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

2004-03-08T23:59:59.000Z

123

From Agile Software Product Line Engineering Towards Software  

E-Print Network [OSTI]

construction of software applications using pre- developed assets. Agile software development (ASD) is another in this thesis: RQ1: How can software product line engineering and agile software development be combined? RQ2From Agile Software Product Line Engineering Towards Software Ecosystems Geir Kjetil Hanssen

Langseth, Helge

124

Comparison of Software Models for Energy Savings from Cool Roofs  

SciTech Connect (OSTI)

A web-based Roof Savings Calculator (RSC) has been deployed for the United States Department of Energy as an industry-consensus tool to help building owners, manufacturers, distributors, contractors and researchers easily run complex roof and attic simulations. This tool employs modern web technologies, usability design, and national average defaults as an interface to annual simulations of hour-by-hour, whole-building performance using the world-class simulation tools DOE-2.1E and AtticSim in order to provide estimated annual energy and cost savings. In addition to cool reflective roofs, RSC simulates multiple roof and attic configurations including different roof slopes, above sheathing ventilation, radiant barriers, low-emittance roof surfaces, duct location, duct leakage rates, multiple substrate types, and insulation levels. A base case and energy-efficient alternative can be compared side-by-side to estimate monthly energy. RSC was benchmarked against field data from demonstration homes in Ft. Irwin, California; while cooling savings were similar, heating penalty varied significantly across different simulation engines. RSC results reduce cool roofing cost-effectiveness thus mitigating expected economic incentives for this countermeasure to the urban heat island effect. This paper consolidates comparison of RSC s projected energy savings to other simulation engines including DOE-2.1E, AtticSim, Micropas, and EnergyPlus, and presents preliminary analyses. RSC s algorithms for capturing radiant heat transfer and duct interaction in the attic assembly are considered major contributing factors to increased cooling savings and heating penalties. Comparison to previous simulation-based studies, analysis on the force multiplier of RSC cooling savings and heating penalties, the role of radiative heat exchange in an attic assembly, and changes made for increased accuracy of the duct model are included.

New, Joshua Ryan [ORNL; Miller, William A [ORNL; Huang, Yu (Joe) [White Box Technologies; Levinson, Ronnen [Lawrence Berkeley National Laboratory (LBNL)

2014-01-01T23:59:59.000Z

125

Software Quality Assurance: Directives and Guidance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Directives and Guidance Directives and Guidance DOE O 414.1D, Quality Assurance DOE G 414.1-4, Software Guide for use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance DOE Order O 414.1D, Quality Assurance, includes Attachment 4 addressing SQA requirements for nuclear safety applications at DOE nuclear facilities. The DOE O 414.1D was issued April 25, 2011. This Order and its associated Guide for safety software, DOE G 414.1-4, Safety Software Guide for use with 10 CFR 830 Subpart A, Quality Assurance Requirements. The Order identifies 10 software quality work activities that are to be performed using the graded approach specified in the Order. These 10 work activities are: (1) software project management, (2) software risk management, (3) software configuration management, (4) procurement and vendor management, (5) software requirements identification and management, (6) software design and implementation, (7) software safety design, (8) verification and validation, (9) problem reporting and corrective action, and (10) training of personnel in the design, development, use and evaluation of safety software. These 10 work activities were consolidated from practices and activities identified in several well known consensus standards and federal requirements. Safety software must be acquired, developed and implemented using ASME NQA-1-2008 with the NQA-1a-2009 addenda (or later edition), Quality Assurance Requirements for Nuclear Facility Applications, Part 1 and Subpart 2.7, or other national or international consensus standards that provide an equivalent level of quailty assurance requirements as NQA-1-2008.

126

Tax Deduction Qualified Software  

Broader source: Energy.gov (indexed) [DOE]

Tax Deduction Qualified Software Tax Deduction Qualified Software EnergyGauge Summit version 3.21 On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 3 September 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Florida Solar Energy Center 1679 Clearlake Road

127

Extreme Computing Software | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Extreme Computing Software Extreme Computing Software Argonne's Mathematics and Computer Science Division is exploring new approaches to systems software, fault tolerance, and innovative programming models for next-generation computers. Software for extreme computing includes: ADLB (Asynchronous Dynamic Load Balancing) is an MPI-based software library designed to help rapidly build scalable parallel programs. It provides a master/worker system with a put/get API for task descriptions, thus allowing workers to add work dynamically to the system. The library has been used as an execution engine for complicated applications such as Green's function Monte Carlo and higher level "many-task" programming models. Aesop is a high-productivity programming language designed for highly concurent services.

128

Risks in software development with imperfect testing  

Science Journals Connector (OSTI)

This study analytically assesses the risk of releasing defective software that cannot be exhaustively tested and of needlessly testing defect-free software. Specifically, it quantifies the probability of committing a Type II error () in software development when one may release software that still is faulty while the test methods themselves may not be perfect. The study uses truncated Poisson and geometric distributed path lengths and Bernoulli-type inspection errors to link to software design features, the development philosophies employed and certain aspects that include code quality, cyclomatic complexity and the average length of basis paths. For risk reduction, this study finds quantitative justification for raising test coverage, perfecting the test methods, the adoption of recent innovations and programming methods such as component-based design, SOA and XP as ways to raise the likelihood that the product developed will be fault-free. Results are relatively robust with respect to the probability distributions assumed.

Tapan P. Bagchi

2009-01-01T23:59:59.000Z

129

Gammasphere software development  

SciTech Connect (OSTI)

Activities of the nuclear physics group are described. Progress was made in organizing the Gammasphere Software Working Group, establishing a nuclear computing facility, participating in software development at Lawrence Berkeley, developing a common data file format, and adapting the ORNL UPAK software to run at Gammasphere. A universal histogram object was developed that defines a file format and provides for an objective-oriented programming model. An automated liquid nitrogen fill system was developed for Gammasphere (110 Ge detectors comprise the sphere).

Piercey, R.B.

1993-01-01T23:59:59.000Z

130

Software Function Allocation Methodology  

E-Print Network [OSTI]

performance. TABLE OF CONTENTS Page ABSTRACT TABLE OF CONTENTS LIST OF TABLES LIST OF FIGURES 1. INTRODUCTION 1. 1 Terminology Definitions 1, 2 Problem Definition 2. CURRENT RESEARCH STATUS 2. 1 Current Methodologies 2. 1. 1 Structured Design 2. 1..., 2 The Jackson Methodology 2. 1. 3 Higher Order Software 2. 1. 4 Structured Analysis and Design Technique 2. 1. 5 Software Requirements Engineering Methodology 2. 1. 6 Software Development System 2. 2 Relation to Current Research 3. SFAM...

O'Neal, Michael Ralph

2012-06-07T23:59:59.000Z

131

PETSc: External Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

External Software External Software Home Download Features Documentation Applications/Publications Miscellaneous External Software Developers Site PETSc interfaces to the following optional external software (installing packages) (manual pages): ADIFOR - automatic differentiation for the computation of sparse Jacobians. AMD - Approximate minimum degree orderings. AnaMod - a library of matrix analysis modules; part of the Salsa project. BLAS and LAPACK Chaco - a graph partitioning package. ESSL - IBM's math library for fast sparse direct LU factorization. Euclid - parallel ILU(k) developed by David Hysom, accessed through the Hypre interface. FFTW - Fastest Fourier Transform in the West, developed at MIT by Matteo Frigo and Steven G. Johnson. Hypre - the LLNL preconditioner library.

132

Boone Software and Analysis  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Tutorial held at FNAL on 28 May 2003 Introduction (Steve Brice) Event Generators (Ryan Patterson) EGen (Ryan Patterson) Nuance (Hiro Tanaka) BooDetMC (Ryan...

133

Software Services: About  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About About MISSION The APS Software Services Group provides flexible, customer-oriented software services to the accelerator and beamlines in support of world-class photon science at the APS. These services are rendered through the application of our core competencies: embedded software, software engineering, distributed control systems, information systems, high performance computing, and graphical user interfaces. Our mission is to maintain cutting edge skills and technology in these competencies, apply them to meet or exceed the requirements of the accelerator and beamline projects at hand, and provide responsive, efficient support of established systems. Projects shall be conducted in a transparent, well-documented manner to enable the prioritization of our services

134

Software architecture awareness in long-term software product evolution  

Science Journals Connector (OSTI)

Software architecture has been established in software engineering for almost 40 years. When developing and evolving software products, architecture is expected to be even more relevant compared to contract development. However, the research results ... Keywords: Architecture knowledge management, Cooperative and human aspects, Long-term evolution, Qualitative empirical studies, Software architecture, Software products

Hataichanok Unphon; Yvonne Dittrich

2010-11-01T23:59:59.000Z

135

Tax Deduction Qualified Software  

Broader source: Energy.gov [DOE]

On this page you'll find information about the EnergyGauge Summit version 3.22 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

136

Tax Deduction Qualified Software  

Broader source: Energy.gov [DOE]

On this page you'll find information about the EnergyGauge Summit version 3.21 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

137

Tax Deduction Qualified Software  

Broader source: Energy.gov [DOE]

On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

138

Software Quality Assurance Control of Existing Systems | Department of  

Broader source: Energy.gov (indexed) [DOE]

Software Quality Assurance Control of Existing Systems Software Quality Assurance Control of Existing Systems Software Quality Assurance Control of Existing Systems Existing software systems often represent significant investments and play important roles in the every day businesses of organizations. To meet current and future operational needs, organizations need to plan how best to address these support issues. Some of the issues to consider are presented in this document with references to related standards for further detailed examination. Two tutorials, one based on software maintenance and another detailing a baseline recovery strategy are included Software Quality Assurance Control of Existing Systems More Documents & Publications Software Quality Assurance Control of Existing Systems Software Quality: A Guide to Responsibilities and Resources, SQAS

139

Sector 1 - Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

APS Software APS Software Scientists and researchers at the APS develop custom scientific software to help with acquisition and analysis of beamline data. Several packages are available for a variety of platforms and uses. Data Acquisition Motion control and data collection at the 1-BM and 1-ID beamlines are primarily executed using EPICS software. We also utilize SPEC, running through EPICS, for many experiments. Data Analysis Some of the programs used at Sector 1 to analyse 1-d and/or 2-d data sets are described: Fit2d, for viewing and analysing 2-dimensional data Igor, for analysis of small-angle scattering data Matlab, for strain/texture analysis and image analysis. GSAS/EXPGUI, for structural refinement of diffraction data. A comprehensive list of Powder Diffraction Software and Resources can be

140

NERSC Software List  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Compilers Compilers Development Tools Programming Libraries Debugging and Profiling Visualization and Analytics Grid Software and Services NERSC Software Downloads Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Software » All Software List All Software List Package Platform Category Version Module Install Date Date Made Default edison / 1.0.0 craypkg-gen/1.0.0 2013-11-27 2013-11-27

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Software Services: Priorities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Priorities Priorities Priorities are how we stay focused on the things that are most important. They help position the SSG and the APS to achieve its goals. We take choosing our priorities seriously. The projects the SSG works on and the amount of time and resources dedicated to those projects are determined based on a number of factors and from input from a variety of sources. Software Advisory Group The Software Advisory Group serves as an advisory group to the SSG. Its membership consists of XSD staff concerned with the state of software at the APS. It's a venue to discuss current projects and future directions, and to foster communication between the SSG and the XSD staff. The Software Advisory Group also provides input on new project ideas and proposals. Issues, concerns and suggestions from the Software Advisory Group and

142

Software Services By Michal Antkiewicz  

E-Print Network [OSTI]

· Software Engineering ­ Methods and processes of software development · Evolving enterprise software and Component-Based Development to Build Web Service Applications. Cupertino, CA: Rational Software Corporation Agility · New market for car loans · New business service needed ­ Provide car loans · New software

Czarnecki, Krzysztof

143

SHMTools: a general-purpose software tool for SHM applications  

SciTech Connect (OSTI)

This paper describes a new software package for various structural health monitoring (SHM) applications. The software is a set of standardized MATLAB routines covering three main stages of SHM: data acquisition, feature extraction, and feature classification for damage identification. A subset of the software in SHMTools is embeddable, which consists of Matlab functions that can be cross-compiled into generic 'C' programs to be run on a target hardware. The software is also designed to accommodate multiple sensing modalities, including piezoelectric active-sensing, which has been widely used in SHM practice. The software package, including standardized datasets, are publicly available for use by the SHM community. The details of this embeddable software will be discussed, along with several example processes that can be used for guidelines for future use of the software.

Harvey, Dustin [Los Alamos National Laboratory; Farrar, Charles [Los Alamos National Laboratory; Taylor, Stuart [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Flynn, Eric B [UCSD; Kpotufe, Samory [UCSD; Dondi, Denis [UCSD; Mollov, Todor [UCSD; Todd, Michael D [UCSD; Rosin, Tajana S [UCSD; Figueiredo, Eloi [UNIV OF PORTO, PORTUGAL

2010-11-30T23:59:59.000Z

144

FAQS Qualification Card - Safety Software Quality Assurance | Department  

Broader source: Energy.gov (indexed) [DOE]

Safety Software Quality Assurance Safety Software Quality Assurance FAQS Qualification Card - Safety Software Quality Assurance A key element for the Department's Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA). For each functional area, the FAQS identify the minimum technical competencies and supporting knowledge and skills for a typical qualified individual working in the area. FAQC-SafetySoftwareQualityAssurance.docx Description Safety Software Quality Assurance Qualification Card More Documents & Publications

145

CCD Astronomy Software User's Guide  

E-Print Network [OSTI]

CCDSoft CCD Astronomy Software User's Guide Version 5 Revision 1.11 Copyright © 1992­2006 SantaSky Astronomy Software, and AutomaDome are trademarks of Software Bisque. WindowsTM is a trademark of Microsoft

146

ReuseSEEM: an approach to support the definition, modeling, and analysis of software ecosystems  

Science Journals Connector (OSTI)

Software Engineering (SE) community has discussed economic and social issues as a challenge for the next years. Companies and organizations have directly (or not) opened up their software platforms and assets to others, including partners and 3rd party ... Keywords: Conceptual Map, Domain, Software Ecosystems, Software Reuse

Rodrigo Pereira dos Santos

2014-05-01T23:59:59.000Z

147

A Comparison of EnergyPlus to DOE-2.1E: Multiple Cases Ranging from a Sealed Box to a Residential Building  

E-Print Network [OSTI]

of programs for the same cases defined in ANSI/ASHRAE Standard 140. This study expanded upon the previous comparisons to include the simplest case scenario where the building was a sealed box without infiltration, internal load, system or plant...

Andolsun, S.; Culp, C.

148

Software | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Computing Resources Mira Cetus and Vesta Visualization Clusters Data and Networking Software JLSE Software ALCF MPI Benchmark Suite: ALCF MPI Benchmark Suite, which is designed to...

149

software | OpenEI Community  

Open Energy Info (EERE)

software Home Future of Condition Monitoring for Wind Turbines Description: Research into third party software to aid in the development of better CMS in order to raise turbine...

150

Testing in Software Product Lines.  

E-Print Network [OSTI]

??This thesis presents research aimed at investigating different activities involved in software product lines testing process and possible improvements towards achieving developing high quality software (more)

Odia, Osaretin

2007-01-01T23:59:59.000Z

151

Tax Deduction Qualified Software  

Broader source: Energy.gov (indexed) [DOE]

EnergyGauge Summit version 3.20 EnergyGauge Summit version 3.20 On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 5 June 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Florida Solar Energy Center 1679 Clearlake Road Cocoa, Florida 39922 http://www.energygauge.com

152

Tax Deduction Qualified Software  

Broader source: Energy.gov (indexed) [DOE]

TRACE 700 version 6.2.9 TRACE 700 version 6.2.9 On this page you'll find information about the TRACE 700 version 6.2.9 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 3 October 2012 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Trane 3600 Pammel Creek Road La Crosse, WI 54601 http://www.trane.com/trace (2) The name, email address, and telephone number of the person to contact for

153

Nucleic Acid Softwars  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nucleic Acid Software Nucleic Acid Software FR3D, a software for finding local and composite recurrent structural motifs in RNA 3D structures. Sarver, M., Zirbel, C.L., Stombaugh, J., Mokdad, A. and Leontis, N.B. (2008) FR3D: finding local and composite recurrent structural motifs in RNA 3D structures. J Math Biol, 56, 215-252. RNAView, a program for quickly generating a display of RNA/DNA secondary structures with tertiary interactions. Yang, H., Jossinet, F., Leontis, N., Chen, L., Westbrook, J., Berman, H.M. and Westhof, E. (2003) Tools for the automatic identification and classification of RNA base pairs. Nucleic Acids Res, 31, 3450-3460. RNAMLview, a program to display and/or edit RNAView 2-dimensional diagrams. 3DNA, a software package for the analysis, rebuilding and visualization of three-dimensional nucleic acid structures.

154

Job Opportunity Software Engineer  

E-Print Network [OSTI]

projects in the Department of Emergency Medicine. The software engineer must have a strong languages: Required: SQL (SQL Server Preferred), JAVA, C/C++, Matlab Preferred: PHP, Python, CSS, Java

Plotkin, Joshua B.

155

Seismic Array Software System  

E-Print Network [OSTI]

Seismic Array Software System Sam Irvine, Martin Lukac,of a Portable Broadband Seismic Array Long - Part of theStudy the propagation of seismic waves in Mexico City Line

2005-01-01T23:59:59.000Z

156

Freie GIS-Software  

Science Journals Connector (OSTI)

In der Regel sind diese als proprietr zu bezeichnenden Software-Pakete fachlich ausgereift. Es entstehen aber fr den Nutzer auch einige Nachteile, z.B.: Die Programme knnen blicherweise nicht...

Jens Fitzke; Jan-Oliver Wagner

2002-09-01T23:59:59.000Z

157

Software Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01. To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). Does not cancel other directives.

2000-10-02T23:59:59.000Z

158

Software Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01.

2000-10-02T23:59:59.000Z

159

JGI Available Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Software Software NERSC/JGI Supported Software in Modules NERSC is actively building a new tree of software for genepool accessible through the modules system. For software not yet migrated into modules, please see the legacy /jgi/tools installations below. Package Category Version Module Install Date Date Made Default 7zip applications/ general 9.20.1 7zip/9.20.1 2013-01-14 2013-01-14 ABYSS applications/ bioinformatics 1.3.2 Abyss/1.3.2 2012-04-03 2012-04-03 ABySS applications/ bioinformatics 1.3.4 ABySS/1.3.4 2012-11-26 2012-11-26 acml libraries/ math 5.1.0 acml/5.1.0 2012-07-07 ALE applications/ bioinformatics 20120918-2-g28da522 ALE/20120918-2-g28da522 2013-01-24 2013-01-24 ALE applications/ bioinformatics 20130717 ALE/20130717 2013-07-17 2013-07-17

160

Compiling software for a hierarchical distributed processing system  

DOE Patents [OSTI]

Compiling software for a hierarchical distributed processing system including providing to one or more compiling nodes software to be compiled, wherein at least a portion of the software to be compiled is to be executed by one or more nodes; compiling, by the compiling node, the software; maintaining, by the compiling node, any compiled software to be executed on the compiling node; selecting, by the compiling node, one or more nodes in a next tier of the hierarchy of the distributed processing system in dependence upon whether any compiled software is for the selected node or the selected node's descendents; sending to the selected node only the compiled software to be executed by the selected node or selected node's descendent.

Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

2013-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

j5 DNA Assembly Design Automation Software  

Science Journals Connector (OSTI)

j5 DNA Assembly Design Automation Software ... Here, we report the development and deployment of a web-based software tool, j5, which automates the design of scar-less multipart DNA assembly protocols including SLIC, Gibson, CPEC, and Golden Gate. ... The key innovations of the j5 design process include cost optimization, leveraging DNA synthesis when cost-effective to do so, the enforcement of design specification rules, hierarchical assembly strategies to mitigate likely assembly errors, and the instruction of manual or automated construction of scar-less combinatorial DNA libraries. ...

Nathan J. Hillson; Rafael D. Rosengarten; Jay D. Keasling

2011-12-07T23:59:59.000Z

162

Common Misconceptions about Software Architecture  

E-Print Network [OSTI]

Common Misconceptions about Software Architecture by Philippe Kruchten Rational Fellow Rational Software Canada References to architecture are everywhere: in every article, in every ad. And we take definition of software architecture. Are we all understanding the same thing? We gladly accept that software

van der Hoek, André

163

User' Software Manual  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MM-Group Home MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction Beamline 4-ID-D uses the EPICS platform for beamline control. This is a distributed client-server software where seperate server computers (IOCs) are used to control and monitor different portions of the beamline, and a separate client computer is used for data aquisition and display information. The client computer controls the other IOCs via the local ethernet network. The EPICS client "MEDM" is used for graphically displaying information about the beamline. The command line driven program SPEC is used for scanning adn other data acquisition fruncitons. More information on each of these is found below.

164

Hopper Software and Tools  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

File Storage and I/O File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Carver PDSF Genepool Testbeds Retired Systems Data & File Systems Network Connections Queues and Scheduling Job Logs & Analytics Training & Tutorials Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Computational Systems » Hopper » Software and Tools

165

Lighting Group: Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Software Lighting Software The Lighting Group has developed several computer programs in the course of conducting research on energy efficient lighting. Several of these programs have proven useful outside the research environment. One of the most popular programs for advanced lighting applications is Radiance. For more information on this program and its availability, click on the link below. RADIANCE Radiance is a suite of programs for the analysis and visualization of lighting in design. The primary advantage of Radiance over simpler lighting calculation and rendering tools is that there are no limitations on the geometry or the materials that may be simulated. Radiance is used by architects and engineers to predict illumination, visual quality and appearance of innovative design spaces, and by researchers to evaluate new

166

Reducing Software Failures: Addressing the Ethical Risks of the Software Development By Don Gotterbarn  

E-Print Network [OSTI]

Reducing Software Failures: Addressing the Ethical Risks of the Software Development Lifecycle by software developers. This process also is incorporated into a software development life cycle. A tool to develop Software Development Impact Statements is also discussed. INTRODUCTION Software developers

De Montfort University

167

Software FMEA analysis for safety-related application software  

Science Journals Connector (OSTI)

Abstract A method of a software safety analysis is described in this paper for safety-related application software. The target software system is a software code installed at an Automatic Test and Interface Processor (ATIP) in a digital reactor protection system (DRPS). For the ATIP software safety analysis, at first, an overall safety or hazard analysis is performed over the software architecture and modules, and then a detailed safety analysis based on the software FMEA (Failure Modes and Effect Analysis) method is applied to the ATIP program. For an efficient analysis, the software FMEA analysis is carried out based on the so-called failure-mode template extracted from the function blocks used in the function block diagram (FBD) for the ATIP software. The software safety analysis by the software FMEA analysis, being applied to the ATIP software code, which has been integrated and passed through a very rigorous system test procedure, is proven to be able to provide very valuable results (i.e., software defects) that could not be identified during various system tests.

Gee-Yong Park; Dong Hoon Kim; Dong Young Lee

2014-01-01T23:59:59.000Z

168

Computer Software Review: Reaxys  

Science Journals Connector (OSTI)

Computer Software Review: Reaxys ... Clicking on a button gave a menu with a series of options to find out more about the molecule illustrated, and there was also an option to plan a synthesis. ... I asked for more data on piperidine, a compound that was mentioned in the paper but not characterized, as it is a standard reagent. ...

Jonathan Goodman

2009-12-04T23:59:59.000Z

169

Past Projects | Department of Energy  

Energy Savers [EERE]

provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. These modules offer a consistent baseline of comparison and improve...

170

Blog in web application: a software engineering perspective  

Science Journals Connector (OSTI)

Blogs are being extensively integrated in web applications, to facilitate communication and interaction with the users. Usually, freely available blog software is adapted and integrated into web application, with blog software being installed on web application server or server of blog software provider. Even though several blog software exist for integration, academically, there is no mention of requirement specification or design document for blog software for use during integration. Since not all the features are relevant for the user, there is a need for some kind of mechanism, so that, the user can identify the features that are to be included in blog software, during integration. In this paper, we present for blog software in web application: 1) a design; 2) weighted requirement checklists. The design helps the developer during creating and updating of blog software. The logical view of design displays interaction of entities and sub-entities with actors. For easing requirement selection for user, a weighted requirement checklist is presented here. A metric, software estimation, is defined for quantifying selected requirements. A case study of freely available blog software is presented to which estimation and design is applied.

Karan Gupta; Anita Goel

2014-01-01T23:59:59.000Z

171

ASTRO-F/FIS observing simulation including detector characteristics  

E-Print Network [OSTI]

ASTRO-F/FIS observing simulation including detector characteristics Woong-Seob Jeong a,*, Soojong instruments, the far-infrared surveyor (FIS) will map the entire sky in four bands using short wavelength (SW- oped a suite of software with an aim to simulate the FIS observations (Jeong et al., 2000, 2003, 2004

Pak, Soojong

172

C# Software Title Software Description Date  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

minimal functionality, intended to provide emergency recovery commands, wipe hard drives, repair damaged file systems, back up disks, etc. It also provides a mechanism to include...

173

SAPHIRE 8 Software Quality Assurance Oversight  

SciTech Connect (OSTI)

The software quality assurance oversight consists of updating and maintaining revision control of the SAPHIRE 8 quality assurance program documentation and of monitoring revision control of the SAPHIRE 8 source code. This report summarizes the oversight efforts through description of the revision control system (RCS) setup, operation and contents. Documents maintained under revision control include the Acceptance Test Plan (ATP), Configuration Management Plan, Quality Assurance Plan, Software Project Plan, Requirements Traceability Matrix (RTM), System Test Plan, SDP Interface Training Manual, and the SAPHIRE 8, 'New Features and Capabilities Overview'.

Kurt G. Vedros

2011-09-01T23:59:59.000Z

174

Software Quality Assurance Control of Existing Systems | Department of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Assurance Control of Existing Systems Assurance Control of Existing Systems Software Quality Assurance Control of Existing Systems Existing software systems often represent significant investments and play important roles in the every day businesses of organizations. To meet current and future operational needs, organizations need to plan how best to address these support issues. Some of the issues to consider are presented in this document with references to related standards for further detailed examination. Two tutorials, one based on software maintenance and another detailing a baseline recovery strategy are included Software Quality Assurance Control of Existing Systems More Documents & Publications Software Quality Assurance Control of Existing Systems Software Quality: A Guide to Responsibilities and Resources, SQAS

175

Building Energy Tools Software Directory | Open Energy Information  

Open Energy Info (EERE)

Building Energy Tools Software Directory Building Energy Tools Software Directory Jump to: navigation, search Tool Summary Name: Building Energy Tools Software Directory Agency/Company /Organization: United States Department of Energy Sector: Energy Focus Area: Energy Efficiency, Buildings Phase: Create a Vision, Determine Baseline, Develop Goals Topics: Technology characterizations Resource Type: Dataset, Software/modeling tools User Interface: Website Website: apps1.eere.energy.gov/buildings/tools_directory/ References: http://apps1.eere.energy.gov/buildings/tools_directory/ Logo: Building Energy Tools Software Directory This directory provides information on 388 building software tools for evaluating energy efficiency, renewable energy, and sustainability in buildings. The energy tools listed in this directory include databases,

176

The Software Invention Cube: a Classification Scheme for Software Inventions  

E-Print Network [OSTI]

engineering lifecycle, software patents, IPR on software. 1 #12;1 Background As part of a three year European was formulated for an IPR-based software engineering life cycle and it was argued that only when an IPR licensing as well as IPR defense is possible. Further an extensive discussion was given regarding

Klint, Paul

177

Cleanroom Software Development: An Empirical Evaluation  

Science Journals Connector (OSTI)

The Cleanroom software development approach is intended to produce highly reliable software by integrating formal methods for specification and design, nonexecution-based program development, and statistically based independent testing. In an empirical ... Keywords: software testing, Empirical study, methodology evaluation, off-line software review, software development methodology, software management, software measurement

Richard W. Selby; Victor R. Basili; F. Terry Baker

1987-09-01T23:59:59.000Z

178

Dynamic capabilities in the software process  

Science Journals Connector (OSTI)

Software development is an important dynamic capability of a software-developing organisation. This paper explores product development in general and software development in particular from the viewpoint of the dynamic capabilities research stream ... Keywords: RBV, dynamic capabilities, inductive reasoning, product development, product innovation, resource transformation typology, resource-based view, software business, software development, software engineering, software process

Markus M. Makela; Nilay V. Oza; Jyrki Kontio

2008-12-01T23:59:59.000Z

179

Building Energy Software Tools Directory: Window  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Window Window WINDOW screenshot. Calculates thermal performance of fenestration products; heat transfer analysis method consistent with the rating procedure developed by the National Fenestration Rating Council (NFRC). Screen Shots Keywords fenestration, thermal performance, solar optical characteristics, windows, glazing Validation/Testing N/A Expertise Required Some knowledge about windows. Users 2000+ in the U.S. and abroad. Audience Manufacturers, engineers, architects, researchers, sales personnel. Input Interactive program: user-provided data files for frames (from the THERM program) and glazing layers (from the Optics program) optional. Output Reports for the total window can be saved to disk or printed; files can be generated to be used as input to the DOE-2 and EnergyPlus programs;

180

Safety Software Quality Assurance: Training  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Training Training classroom DOE is committed to provide qualified staff to assist, guide, direct, oversee and evaluate its safety software. The Department's Safety Software Quality Assurance Functional Area Qualification Standard (FAQS) establishes common functional area competency requirements for its personnel. Additionally, specific Office/Facility-Specific Qualification Standard supplements the technical FAQS and establishes unique operational competency requirements. DOE O 426.1, Federal Technical Capability defines the requirements and responsibilities for developing a technically competent workforce to accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). This accomplished through the Technical Qualification Program (TQP) which applies to DOE technical employess whose duties and responsibilities require them to provide assistance, guidance, direction, or oversight that could affect the safe operation of a defense nuclear facility, including evaluation of contractor activities at those facilities. The TQP, along with the supporting technical Functional Area Qualification Standards, complements the personnel processes that support DOE's drive for technical excellence. Detailed operating requirements for the TQP and Functional Area Qualification Standards are described in DOE M 426.1-1.

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Collaborative learning in software development  

E-Print Network [OSTI]

fields such as software process improvement, team research, organizational learning, organization scienceCollaborative learning in software development: An investigation of characteristics, prerequisites and Technology #12;[ii] Abstract Collaborative learning integrates individual and collective learning

Langseth, Helge

182

Software Quality Assurance Control of Existing Systems  

Broader source: Energy.gov (indexed) [DOE]

2.01.00 - 2002 2.01.00 - 2002 Software Quality Assurance Control of Existing Systems September 2002 United States Department of Energy Albuquerque Operations Office Abstract Existing software systems often represent significant investments and play important roles in the every day businesses of organizations. Many of these systems are experiencing support problems. To meet current and future operational needs, organizations need to plan how best to address these support issues. Some of the issues to consider are presented in this document with references to related standards for further detailed examination. Two tutorials, one based on software maintenance and another detailing a baseline recovery strategy are included. SQA Control of Existing Systems SQAS22.01.00-2002

183

Building Energy Optimization Software | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Energy Energy Optimization Software Building Energy Optimization Software BEopt 2.1 Now Available! BEopt Version 2.1 is now available and includes major features such as: mini-split heat pumps and room air conditioners (E+); new modeling inputs; component-based air leakage estimate for existing buildings; and more. Read about the new features and visit the BEopt website to download. To help meet Building America's goal to develop market-ready energy solutions that improve efficiency of new and existing homes, the National Renewable Energy Laboratory (NREL) developed the Building Energy Optimization (BEopt) software tool. This specialized computer program is designed to identify optimally efficient designs for new and existing homes at the lowest possible cost. BEopt produces detailed simulation-based analysis and design optimization

184

Gammasphere software development. Progress report  

SciTech Connect (OSTI)

This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information.

Piercey, R.B.

1994-01-01T23:59:59.000Z

185

Model-based software component testing.  

E-Print Network [OSTI]

??[Truncated abstract] Software component testing (SCT) is a proven software engineering approach to evaluating, improving and demonstrating component reliability and quality for producing trusted software (more)

Zheng, Weiqun

2012-01-01T23:59:59.000Z

186

Accurately Citing Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Accurately Accurately Citing Software and Algorithms Used in Publications Matthew G. Knepley Computation Institute University of Chicago Chicago, IL, USA knepley@ci.uchicago.edu Jed Brown, Lois Curfman McInnes, and Barry Smith Mathematics and Computer Science Division Argonne National Laboratory Argonne, IL, USA [jedbrown,mcinnes,bsmith]@mcs.anl.gov August 31, 2013 Abstract Properly citing academic publications that describe software libraries and algo- rithms is the way that open source scientific library users "pay" to use the free soft- ware. With large multifaceted libraries and applications that use several such libraries, even the conscientious user ends up citing publications in error or missing relevant publications. Some open source developers list appropriate citations on their website or in their documentation. Based on a recent addition to the PETSc

187

Neutron Scattering Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Software A new portal for neutron scattering has just been established at neutronsources.org. The information contained here in the Neutron Scattering Web has been transferred to the new site. We will leave the current content here for archival purposes but no new content will be added. We encourage everyone interested in neutron scattering to take full advantage of this exciting new resource for our community. Neutronsources.org Data Formats NeXus: Neutron and X-ray Data Format Crystallographic Binary Format (CBF/imgCIF) Hierarchical Data Format (HDF) Data Analysis and Visualization Data Analysis for Neutron Scattering Experiments (DANSE): distributed data analysis project Large Array Manipulation Program (LAMP): IDL-based data analysis and visualization

188

Benchmarking a software transition process  

Science Journals Connector (OSTI)

Software transition is a strongly under-researched process as compared to other software lifecycle processes. Today, basic issues such as how and by whom software transition is performed are not clear enough. In this paper, we explore these issues by ... Keywords: deployment, handover, marketing, quality assurance, testing

Houssam Toufaili; Mira Kajko-Mattsson

2010-06-01T23:59:59.000Z

189

EnergyPlus | Department of Energy  

Energy Savers [EERE]

Energy Lab (NREL) - Golden, CO -- Lawrence Berkeley National Lab (LBNL) - Berkeley, CA -- Oak Ridge National Lab (ORNL) - Oak Ridge, TN -- Florida Solar Energy Center (FSEC) -...

190

EnergyPlus Run Time Analysis  

E-Print Network [OSTI]

PACKAGEDTERMINAL:HEATPUMP:AIRTOAIR, Unit Ventilator, andCONTROLLER:SIMPLE, UnitarySystem:HeatPump:WaterToAir,and UnitarySystem:HeatPump:WaterToAir. These convergence

Hong, Tianzhen

2009-01-01T23:59:59.000Z

191

EnergyPlus- 2013 Peer Review  

Broader source: Energy.gov [DOE]

Emerging Technologies Project about building energy modeling for the 2013 Building Technologies Office's Program Peer Review.

192

Software-Based Challenges of Developing the Future Distribution Grid  

E-Print Network [OSTI]

data from AMI or load research programs, constant power data. Load models in PSS/SINCAL include, impedance constant power power systems modeling software, load composition is typically developed based on customer class (residential, commercial, industrial), weather data,

Stewart, Emma

2014-01-01T23:59:59.000Z

193

www.nasa.gov Core Flight Software System  

E-Print Network [OSTI]

architecture features a plug-and-play software executive called the Core Flight Executive (cFE), a re 2009, certified cFE for flight. Several upcoming missions, including the Global Precipitation

Christian, Eric

194

Elite Software | Open Energy Information  

Open Energy Info (EERE)

Elite Software Elite Software Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Elite Software Agency/Company /Organization: Elite Software Sector: Energy Focus Area: Buildings Phase: Evaluate Options, Prepare a Plan Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.elitesoft.com/ Cost: Paid References: CHVAC - Commercial HVAC Loads[1] Typically used by designers, this software allows the user to input project construction and internal enrgy sources to calculate peak loads for the specific building to determine system design parameters for equipment components. Overview Typically used by designers, this software allows the user to input project construction and internal energy sources to calculate peak loads for the specific building to determine system design parameters for equipment

195

Information Visualization for Agile Software Development Teams  

E-Print Network [OSTI]

Information Visualization for Agile Software Development Teams Julia Paredes Department of Computer software development teams. The results of the systematic mapping show that Agile teams use visualization artifacts amongst team members. Keywords--Agile software development, information visualiza- tion, software

Maurer, Frank

196

Integrating agile practices into critical software development  

E-Print Network [OSTI]

Integrating agile practices into critical software development Katarzyna Lukasiewicz, Janusz Górski. In this text we describe our research towards introducing agile practices into critical software development processes Keywords-- safety-critical software; agile practices; software development; process improvement

Boyer, Edmond

197

Developing collaborative environments - A Holistic software development methodology  

SciTech Connect (OSTI)

Sandia National Laboratories has been developing technologies to support person-to-person collaboration and the efforts of teams in the business and research communities. The technologies developed include knowledge-based design advisors, knowledge management systems, and streamlined manufacturing supply chains. These collaborative environments in which people can work together sharing information and knowledge have required a new approach to software development. The approach includes an emphasis on the requisite change in business practice that often inhibits user acceptance of collaborative technology. Leveraging the experience from this work, they have established a multidisciplinary approach for developing collaborative software environments. They call this approach ``A Holistic Software Development Methodology''.

PETERSEN,MARJORIE B.; MITCHINER,JOHN L.

2000-03-08T23:59:59.000Z

198

Meals included in Conference Registrations  

E-Print Network [OSTI]

Meals included in Conference Registrations Meals included as part of the cost of a conference the most reasonable rates are obtained. Deluxe hotels and motels should be avoided. GSA rates have been for Georgia high cost areas. 75% of these amounts would be $21 for non- high cost areas and $27 for high cost

Arnold, Jonathan

199

Empirical studies of agile software development: A systematic review Tore Dyba *, Torgeir Dingsyr  

E-Print Network [OSTI]

Empirical studies of agile software development: A systematic review Tore Dyba° *, Torgeir Dingsøyr. A system- atic review of empirical studies of agile software development up to and including 2005 of agile software development within a common research agenda. For the industrial readership, the review

200

An Overview of the State of the Art in Software Architecture  

E-Print Network [OSTI]

An Overview of the State of the Art in Software Architecture Dewayne E. Perry Bell Laboratories Murray Hill, NJ 07974 dep@research.bell-labs.com Introduction The problem of software architecture has architecture are included in both system architecture and requirements speci - cation. Typically, the software

Perry, Dewayne E.

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Building Energy Software Tools Directory: Energy Estimation Software with  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy Estimation Software with Carbon Footprint Calculation Energy Estimation Software with Carbon Footprint Calculation Energy Estimation Software with Carbon Footprint Calculation logo. Energy Estimation Software for Fan and Pumping Applications estimates energy savings achieved when using a variable frequency drive instead of conventional control methods for fan and pumping applications. The results can be viewed in graphical format and text format and the software has built-in functions to generate an energy estimation report especially designed for consultants. The energy estimator software is available in two editions: Single System Edition This edition allows users to estimate energy savings for a single fan or pump system and generate a multi-page report based on the estimated savings. Project Edition This edition allows users to estimate energy savings of a single fan or

202

The Death of Binary Software: End User Software Moves to the Web  

Science Journals Connector (OSTI)

The World Wide Web is the most powerful medium for information sharing and distribution in the history of humankind. The use of the Web is rapidly spreading into many new areas outside its original intended use, including its use as a platform for software ... Keywords: web programming, web applications, JavaScript, Lively Kernel

Antero Taivalsaari; Tommi Mikkonen; Matti Anttonen; Arto Salminen

2011-01-01T23:59:59.000Z

203

U.S. Dept. of Energy Announcement of Computer Software  

Broader source: Energy.gov (indexed) [DOE]

ANNOUNCEMENT OF ANNOUNCEMENT OF COMPUTER SOFTWARE Record Status (Select one): NEW PACKAGE SOFTWARE REVISION PART I: STI SOFTWARE DESCRIPTION A. Software Title SHORT NAME OR ACRONYM KEYWORDS IN CONTEXT B. Developer(s) E-MAIL ADDRESS(ES) C. Site Product Number 1. DOE CONTRACT/GRANT NUMBER(S) 2. R&D PROJECT ID(S) 3. SOFTWARE OR OTHER IDENTIFYING NUMBER(S) D. Originating Research Organization E. Release Date/Date of Issuance F. Sponsoring Organization G. Other (Information useful to include in published announcement record, which is not suited for any other field on this form) Continued H. Description/Abstract SEND CLEAR OMB Control Number 1910-1400 (OMB Burden Disclosure Statement is on last page of Instructions) (KWIC) TITLE 1 DOE F 241.4 (10-01) (Replaces ESTSC F1 and ESTSC F2)

204

Gammasphere software development. Progress report  

SciTech Connect (OSTI)

Activities of the nuclear physics group are described. Progress was made in organizing the Gammasphere Software Working Group, establishing a nuclear computing facility, participating in software development at Lawrence Berkeley, developing a common data file format, and adapting the ORNL UPAK software to run at Gammasphere. A universal histogram object was developed that defines a file format and provides for an objective-oriented programming model. An automated liquid nitrogen fill system was developed for Gammasphere (110 Ge detectors comprise the sphere).

Piercey, R.B.

1993-05-01T23:59:59.000Z

205

Software for rotordynamic analysis including flexible foundation, soil stiffness and inertia  

E-Print Network [OSTI]

(Deutschen forschungsgesellschaff fur Bodenmechaurc) experimental research, for which he used the Lamb's (1904) problem solution (Half-space under harmonic load to obtain the soil response to an oscillating load applied through a rigid circular plate...

Nallamilli, Bhavani

2012-06-07T23:59:59.000Z

206

software | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

analytical models, databases, and documentation. An Oil and Gas Industry Software CD-ROM containing numerical simulators, analytical models, databases, and documentation is...

207

SAPHIRE 8 Software Configuration Management Plan  

SciTech Connect (OSTI)

The INL software developers use version control for both the formally released SAPHIRE versions, as well as for source code. For each formal release of the software, the developers perform an acceptance test: the software must pass a suite of automated tests prior to official release. Each official release of SAPHIRE is assigned a unique version identifier. The release is bundled into a standard installation package for easy and consistent set-up by individual users. Included in the release is a list of bug fixes and new features for the current release, as well as a history of those items for past releases. Each formal release of SAPHIRE will have passed an acceptance test. In addition to assignment of a unique version identifier for an official software release, each source code file is kept in a controlled library. Source code is a collection of all the computer instructions written by developers to create the finished product. The library is kept on a server, where back-ups are regularly made. This document describes the configuration management approach used as part of the SAPHIRE development.

Curtis Smith

2010-01-01T23:59:59.000Z

208

RFI Seeks Feedback on Third-party Maintenance Strategy for AMO's Software Tools  

Broader source: Energy.gov [DOE]

The Advanced Manufacturing Office (AMO) would like to understand the market opportunities for enhancing and expanding certain industrial system software tools and related assets (including training...

209

Sponsorship includes: Agriculture in the  

E-Print Network [OSTI]

Sponsorship includes: · Agriculture in the Classroom · Douglas County Farm Bureau · Gifford Farm · University of Nebraska Agricultural Research and Development Center · University of Nebraska- Lincoln Awareness Coalition is to help youth, primarily from urban communities, become aware of agriculture

Nebraska-Lincoln, University of

210

WISDAAM software programmer's manual  

SciTech Connect (OSTI)

The WISDAAM system was developed to provide quality control over test data associated with in situ testing at the Waste Isolation Pilot Plant (WIPP). Assurance of data quality is of critical importance as these tests supply the information which will be used for development and verification of the technology required for repository implementation. The amount of data collected from the tests, which are some of the largest ever fielded in an underground facility, prompted the undertaking of a major project task to address data processing. The goal was to create a conceptual umbrella under which all of the activities associated with processing WIPP data (i.e., data reduction, archiving, retrieval, etc.) could be grouped. The WISDAAM system was the product of this task. The overall system covers electronic as well as manual data processing; however, this document deals primarily with those operations implemented by software running on a VAX computer.

Ball, J.R. (RE/SPEC, Inc., Albuquerque, NM (United States))

1992-10-01T23:59:59.000Z

211

Building Energy Software Tools Directory: EPB-software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EPB-software EPB-software EPB-software logo Free application that supports the (Flemish) Energy Performance Legislation for Buildings. EPB=software is based on a large number of building and installation characteristics and calculates the U-values, the average insulation level and the E-level (Primary energy consumption) of newly built or renovated residential and non-residential buildings and controls compliance with energy-efficiency and indoor climate requirements. It also checks the compliance with the minimum ventilation requirements for all types of buildings. EPB-software Vlaanderen 1.0 has been public since March 2006. A French test version was made for the Brussels region and will be made for the Wallon region. Screen Shots Keywords EPBD implementation, Flemish region, primary energy consumption

212

Software Synthesis Procedures Viktor Kuncak  

E-Print Network [OSTI]

Software Synthesis Procedures Viktor Kuncak LARA, I&C Swiss Federal Institute of Technology (EPFL Institute of Technology (EPFL) Lausanne, Switzerland philippe.suter@epfl.ch ABSTRACT Automated synthesis. To integrate synthesis into programming languages, software synthesis algorithms should behave in a predictable

Kuncak, Viktor

213

Software and House Requirements Engineering  

E-Print Network [OSTI]

a requirements engineer who puts her knowledge of software construction together with her creativity to come upSoftware and House Requirements Engineering: Lessons Learned in Combatting Requirements Creep creativity to try to come up with a plan for a house that will meet the customer's requirements. The customer

Berry, Daniel M.

214

Barloworld Supply Chain Software USA  

E-Print Network [OSTI]

Barloworld Supply Chain Software USA Supply Chain Consultant / Inventory Analyst Position November 2011 #12;Barloworld SCS USA ­ Supply Chain / Inventory Analyst Aug 2011 Page 2 of 4 INTRODUCTION Barloworld Supply Chain Software (SCS) USA would like to invite you to apply for a Supply Chain

Heller, Barbara

215

Characterizing a data model for software measurement  

E-Print Network [OSTI]

Characterizing a data model for software measurement L. Chirinos, F. Losavio, and J. Bøegh Journal of Systems and Software 2005 2006. 7. 19 Yoon, Kyung-A #12;YV YW Contents Introduction Software measurement elements Data model for software measurement Considerations for implementing the software measurement data

Bae, Doo-Hwan

216

RELAP-7 SOFTWARE VERIFICATION AND VALIDATION PLAN  

SciTech Connect (OSTI)

This INL plan comprehensively describes the software for RELAP-7 and documents the software, interface, and software design requirements for the application. The plan also describes the testing-based software verification and validation (SV&V) processa set of specially designed software models used to test RELAP-7.

Smith, Curtis L [Idaho National Laboratory; Choi, Yong-Joon [Idaho National Laboratory; Zou, Ling [Idaho National Laboratory

2014-09-01T23:59:59.000Z

217

COG Software Architecture Design Description Document  

SciTech Connect (OSTI)

This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

Buck, R M; Lent, E M

2009-09-21T23:59:59.000Z

218

Building Energy Software Tools Directory: CPF Tools  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CPF Tools CPF Tools CPF Tools logo CPF Tools is the market-leading software for solar installers connecting sales, system design and financing. Screen Shots Keywords Solar Sales, Quoting Tool, Proposal Tool, Solar Financing, Leads, Auto-Populate, Rebate Form, CRM software, Customer and Financing Dashboard Validation/Testing None Expertise Required Basic understanding of PV. Training is provided through our help site, which features training videos, a user community through Get Satisfaction, and user guides. We also offer live phone support and regular training webinars. Users More than 2,000 Audience Solar professionals, including installers, sales representatives, operations and system design specialists. We also offer a "Channel Manager" version of CPF Tools for manufacturers and distributors.

219

Appendix F Cultural Resources, Including  

Broader source: Energy.gov (indexed) [DOE]

Appendix F Appendix F Cultural Resources, Including Section 106 Consultation STATE OF CALIFORNIA - THE RESOURCES AGENCY EDMUND G. BROWN, JR., Governor OFFICE OF HISTORIC PRESERVATION DEPARTMENT OF PARKS AND RECREATION 1725 23 rd Street, Suite 100 SACRAMENTO, CA 95816-7100 (916) 445-7000 Fax: (916) 445-7053 calshpo@parks.ca.gov www.ohp.parks.ca.gov June 14, 2011 Reply in Reference To: DOE110407A Angela Colamaria Loan Programs Office Environmental Compliance Division Department of Energy 1000 Independence Ave SW, LP-10 Washington, DC 20585 Re: Topaz Solar Farm, San Luis Obispo County, California Dear Ms. Colamaria: Thank you for seeking my consultation regarding the above noted undertaking. Pursuant to 36 CFR Part 800 (as amended 8-05-04) regulations implementing Section

220

Countries Gasoline Prices Including Taxes  

Gasoline and Diesel Fuel Update (EIA)

Countries (U.S. dollars per gallon, including taxes) Countries (U.S. dollars per gallon, including taxes) Date Belgium France Germany Italy Netherlands UK US 01/13/14 7.83 7.76 7.90 8.91 8.76 8.11 3.68 01/06/14 8.00 7.78 7.94 8.92 8.74 8.09 3.69 12/30/13 NA NA NA NA NA NA 3.68 12/23/13 NA NA NA NA NA NA 3.63 12/16/13 7.86 7.79 8.05 9.00 8.78 8.08 3.61 12/9/13 7.95 7.81 8.14 8.99 8.80 8.12 3.63 12/2/13 7.91 7.68 8.07 8.85 8.68 8.08 3.64 11/25/13 7.69 7.61 8.07 8.77 8.63 7.97 3.65 11/18/13 7.99 7.54 8.00 8.70 8.57 7.92 3.57 11/11/13 7.63 7.44 7.79 8.63 8.46 7.85 3.55 11/4/13 7.70 7.51 7.98 8.70 8.59 7.86 3.61 10/28/13 8.02 7.74 8.08 8.96 8.79 8.04 3.64 10/21/13 7.91 7.71 8.11 8.94 8.80 8.05 3.70 10/14/13 7.88 7.62 8.05 8.87 8.74 7.97 3.69

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

CTRLWORK AND MACBREAKZ ERGONOMIC BREAK REMINDER SOFTWARE  

E-Print Network [OSTI]

CTRLWORK AND MACBREAKZ ERGONOMIC BREAK REMINDER SOFTWARE SOFTWARE FEATURES: Analyzes your for installation assistance. 1. Please uninstall the former ergonomic break software, RSIGuard, if currently instructions on the screen. For more information, contact the UCSB Ergonomics Program at Ergonomics

California at Santa Barbara, University of

222

Mapping software: Are we nearing standardization?  

Science Journals Connector (OSTI)

As software technologies advance, the software community uses the newest and most powerful technology and associated notations. However, mapping software with a set of notations that would survive the test of time is becoming increasingly ...

Bakul Banerjee

2000-01-01T23:59:59.000Z

223

CS 537: Software Metrics Students will  

E-Print Network [OSTI]

measurements. Demonstrate the knowledge of software metrics. Demonstrate the knowledge of using software the knowledge of statistical analysis in software measurement. Demonstrate the knowledge of developing and calibrating predication systems. Demonstrate the knowledge of developing and maintaining a measurement program

Heller, Barbara

224

A Virtual Environment Framework For Software Engineering  

E-Print Network [OSTI]

A Virtual Environment Framework For Software Engineering Stephen E. Dossick Submitted in partial Environment Framework for Software Engineering Stephen E. Dossick The field of Software Engineering, responsible for mapping project artifacts into virtual environment furnishings, and the CHIME Theme Manager

Kaiser, Gail E.

225

18 PARTICIPATORY DESIGN ACTIVITIES AND AGILE SOFTWARE  

E-Print Network [OSTI]

18 PARTICIPATORY DESIGN ACTIVITIES AND AGILE SOFTWARE DEVELOPMENT Karlheinz Kautz Department, efficient, and economical manner. Keywords Participatory design, agile software development e prototyping (Merisalo-Rantanen et al. 2005), agile (software) development (ASD) has recently gained immense

Boyer, Edmond

226

Lecture 1:Lecture 1: Introduction toIntroduction to Software Quality AssuranceSoftware Quality Assurance  

E-Print Network [OSTI]

Lecture 1:Lecture 1: Introduction toIntroduction to Software Quality AssuranceSoftware Quality Assurance Software Quality Assurance (INSE 6260/4-UU) Winter 2009 Thanks to Rachida Dssouli for some slides 2 OverviewOverview Course Outline Software Quality Software Quality Assurance Software Development

Bentahar, Jamal

227

Software Process Evolution at the SEL  

Science Journals Connector (OSTI)

The Software Engineering Laboratory of the National Aeronautics and Space Administration's Goddard Space Flight Center has been adapting, analyzing, and evolving software processes for the last 18 years (1976-94). Their approach is based on the Quality ... Keywords: Goddard Space Flight Center, National Aeronautics and Space Administration, Quality Improvement Paradigm, SEL, Software Engineering Laboratory, aerospace computing, candidate process, cleanroom development method, code comments, developer effort, evolutionary process, process effects, reading techniques, software metrics, software process evolution, software quality, standards, systematic process

Victor Basili; Scott Green

1994-07-01T23:59:59.000Z

228

SAPHIRE 8 Software Acceptance Test Plan  

SciTech Connect (OSTI)

This document describe & report the overall SAPHIRE 8 Software acceptance test paln to offically release the SAPHIRE version 8 software to the NRC custoer for distribution.

Ted S. Wood; Curtis L. Smith

2009-07-01T23:59:59.000Z

229

Scientific Software Engineer | Princeton Plasma Physics Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A minimum of one year writing software in the Interactive Data Language (IDL) Matlab, LabView or Python A minimum of one year writing data visualization software...

230

Software Testing Process in Agile Development.  

E-Print Network [OSTI]

??Software testing is the most important process to verify the quality of a product. Software testing in Agile development is very complex and controversial issue (more)

Malik, Ahsan

2008-01-01T23:59:59.000Z

231

Understanding roi metrics for software test automation.  

E-Print Network [OSTI]

??Software test automation is widely accepted as an efficient software testing technique. However, automation has failed to deliver the expected productivity more often than not. (more)

Jayachandran, Naveen

2005-01-01T23:59:59.000Z

232

Aclara Software | Open Energy Information  

Open Energy Info (EERE)

Aclara Software Aclara Software Jump to: navigation, search Name Aclara Software Address 16 Laurel Avenue Place Wellesley, Massachusetts Zip 02481 Sector Efficiency Product Software solutions for efficiency and demand management Website http://www.aclaratech.com/Acla Coordinates 42.3081585°, -71.2773305° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.3081585,"lon":-71.2773305,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

233

Nuclear Safety: Software Quality Assurance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nuclear Safety: Software Quality Assurance Nuclear Safety: Software Quality Assurance cd Welcome to the Department of Energy's Office of Health, Safety and Security (HSS) Software Quality Assurance (SQA) homepage. The purpose of this Web site is to promote continuous improvement and the sharing of knowledge of safety software quality assurance among interested parties across the DOE complex. It consolidates information and contains links to subject matter experts, procedures, training material, program descriptions, good practices, lessons learned and the Central Registry Toolbox Codes. The Portal also provides capabilities for member collaboration in product development and threaded discussions. Central Registry: The Central Registry provides a library of DOE "Toolbox" Codes covering site boundary accident dose consequences, fire accident source terms, leakpath factors, chemical release/dispersion and consequence, and radiological dispersion and consequence.

234

Software and Applications at Borehamwood  

Science Journals Connector (OSTI)

Software is an ephemeral artifact. Programmers are, of course, tangible but the results of their labours survive more in the consequences than in the detail. This chapter and the next can only give a mere glim...

Emeritus Professor Simon Lavington

2011-01-01T23:59:59.000Z

235

General composition of software artifacts  

Science Journals Connector (OSTI)

Composition is the process of creating new artifacts from a set of input artifacts by combining the content of the input artifacts according to some given specifications. Composition engines are a distinct kind of software component. Like compilers, ...

William Harrison; Harold Ossher; Peri Tarr

2006-03-01T23:59:59.000Z

236

Software Agents for Ubiquitous Computing  

Science Journals Connector (OSTI)

Ubiquitous computing draws a picture of a world where people access intelligent and easy-to-use services, irrespective of location and time. Software agent technology is a good candidate for ubiquitous computi...

Sasu Tarkoma; Mikko Laukkanen

2005-01-01T23:59:59.000Z

237

Science & Engineering Applications Software | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science & Engineering Applications Software Science & Engineering Applications Software Argonne's Mathematics and Computer Science Division applies its advanced algorithms and tools to create software that addresses the challenges critical to our society, such as life science, climate change, materials, and energy systems simulations. Software for applications includes: FOAM (Fast Ocean-Atmosphere Model) is a coupled ocean/atmosphere model that incorporates all the physics needed for multicentury simulations. It uses a combination of improved ocean model formulation and reduced-resolution atmosphere model to reduce computational requirements by a factor of ten relative to similar models. It uses parallel processing techniques to allow execution on parallel platforms that are more cost-effective than the vector multiprocessors traditionally used for

238

Software Platform Evaluation - Verifiable Fuel Cycle Simulation (VISION) Model  

SciTech Connect (OSTI)

The purpose of this Software Platform Evaluation (SPE) is to document the top-level evaluation of potential software platforms on which to construct a simulation model that satisfies the requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). See the Software Requirements Specification for Verifiable Fuel Cycle Simulation (VISION) Model (INEEL/EXT-05-02643, Rev. 0) for a discussion of the objective and scope of the VISION model. VISION is intended to serve as a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies. This document will serve as a guide for selecting the most appropriate software platform for VISION. This is a living document that will be modified over the course of the execution of this work.

J. J. Jacobson; D. E. Shropshire; W. B. West

2005-11-01T23:59:59.000Z

239

Commercial Reference Building: Stand-alone Retail | OpenEI  

Open Energy Info (EERE)

Stand-alone Retail Stand-alone Retail Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Stand-alone Retail for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

240

Commercial Reference Building: Warehouse | OpenEI  

Open Energy Info (EERE)

Warehouse Warehouse Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Warehouse for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for three categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Commercial Reference Building: Hospital | OpenEI  

Open Energy Info (EERE)

09 09 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142278309 Varnish cache server Commercial Reference Building: Hospital Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Hospital for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

242

Commercial Reference Building: Large Office | OpenEI  

Open Energy Info (EERE)

Office Office Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Large office for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

243

Commercial Reference Building: Quick Service Restaurant | OpenEI  

Open Energy Info (EERE)

Quick Service Restaurant Quick Service Restaurant Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Quick Service Restaurant for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

244

Commercial Reference Building: Midrise Apartment | OpenEI  

Open Energy Info (EERE)

Midrise Apartment Midrise Apartment Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Midrise Apartment, for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

245

Commercial Reference Building: Medium Office | OpenEI  

Open Energy Info (EERE)

Medium Office Medium Office Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Medium Office for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings. The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for three categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

246

Commercial Reference Building: Small Office | OpenEI  

Open Energy Info (EERE)

Office Office Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Small Office for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for three categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

247

Commercial Reference Building: Strip Mall | OpenEI  

Open Energy Info (EERE)

Strip Mall Strip Mall Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Strip Mall for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

248

Commercial Reference Building: Primary School | OpenEI  

Open Energy Info (EERE)

Primary School Primary School Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Primary School for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for the three categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

249

Commercial Reference Building: Supermarket | OpenEI  

Open Energy Info (EERE)

Supermarket Supermarket Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Supermarket for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

250

Commercial Reference Building: Secondary School | OpenEI  

Open Energy Info (EERE)

Secondary School Secondary School Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Secondary School for each of the 16 climate zones,and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

251

Commercial Reference Building: Full Service Restaurant | OpenEI  

Open Energy Info (EERE)

Full Service Restaurant Full Service Restaurant Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Full-Service Restaurant for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

252

Commercial Reference Building: Large Hotel | OpenEI  

Open Energy Info (EERE)

Hotel Hotel Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Large Hotel for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

253

Commercial Reference Building: Outpatient Health Care | OpenEI  

Open Energy Info (EERE)

Outpatient Health Care Outpatient Health Care Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Outpatient Health Care for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

254

Software Framework for Advanced Power Plant Simulations  

SciTech Connect (OSTI)

This report summarizes the work accomplished during the Phase II development effort of the Advanced Process Engineering Co-Simulator (APECS). The objective of the project is to develop the tools to efficiently combine high-fidelity computational fluid dynamics (CFD) models with process modeling software. During the course of the project, a robust integration controller was developed that can be used in any CAPE-OPEN compliant process modeling environment. The controller mediates the exchange of information between the process modeling software and the CFD software. Several approaches to reducing the time disparity between CFD simulations and process modeling have been investigated and implemented. These include enabling the CFD models to be run on a remote cluster and enabling multiple CFD models to be run simultaneously. Furthermore, computationally fast reduced-order models (ROMs) have been developed that can be 'trained' using the results from CFD simulations and then used directly within flowsheets. Unit operation models (both CFD and ROMs) can be uploaded to a model database and shared between multiple users.

John Widmann; Sorin Munteanu; Aseem Jain; Pankaj Gupta; Mark Moales; Erik Ferguson; Lewis Collins; David Sloan; Woodrow Fiveland; Yi-dong Lang; Larry Biegler; Michael Locke; Simon Lingard; Jay Yun

2010-08-01T23:59:59.000Z

255

The IceCube Data Acquisition Software: Lessons Learned during Distributed, Collaborative, Multi-Disciplined Software Development.  

SciTech Connect (OSTI)

In this experiential paper we report on lessons learned during the development ofthe data acquisition software for the IceCube project - specifically, how to effectively address the unique challenges presented by a distributed, collaborative, multi-institutional, multi-disciplined project such as this. While development progress in software projects is often described solely in terms of technical issues, our experience indicates that non- and quasi-technical interactions play a substantial role in the effectiveness of large software development efforts. These include: selection and management of multiple software development methodologies, the effective useof various collaborative communication tools, project management structure and roles, and the impact and apparent importance of these elements when viewed through the differing perspectives of hardware, software, scientific and project office roles. Even in areas clearly technical in nature, success is still influenced by non-technical issues that can escape close attention. In particular we describe our experiences on software requirements specification, development methodologies and communication tools. We make observations on what tools and techniques have and have not been effective in this geographically disperse (including the South Pole) collaboration and offer suggestions on how similarly structured future projects may build upon our experiences.

Beattie, Keith S; Beattie, Keith; Day Ph.D., Christopher; Glowacki, Dave; Hanson Ph.D., Kael; Jacobsen Ph.D., John; McParland, Charles; Patton Ph.D., Simon

2007-09-21T23:59:59.000Z

256

U.S. CMS - U.S. CMS @ Work - Doing Physics - User Software & Computing -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Setup : Software Setup Setup : Software Setup General CMS Software Environment Platform specific setup Application runtime environment Accessing CERN CVS server References General CMS Software Environment The CMS software environment for csh and tcsh users is set by sourcing the environment setup script. In tcsh, csh: source /uscmst1/prod/sw/cms/cshrc [option] In bash, sh: . /uscmst1/prod/sw/cms/shrc [option] This will set general CMS software environment variables, extend the user's $PATH to include CMS specific utilities and tools, and define aliases used in the CMS software projects. User can set one of the environments by choosing the corresponding argument to the environment setup script. NOTE: if environment is already set, sourcing a script will not change the environment. A warning will be

257

The Road We've Traveled: 12 Years of Undergraduate Software Engineering at the Rochester Institute of Technology  

E-Print Network [OSTI]

: A Baccalaureate Degree in Software Engineering"[1]; with this paper we bring the history up to date, discus that lies in front of us. 2. History of the program While software engineering concepts had been includedThe Road We've Traveled: 12 Years of Undergraduate Software Engineering at the Rochester Institute

Vallino, James R

258

Proposals with computer/laptop and software purchases: In order to use agency funds to pay for computers, software and peripherals,  

E-Print Network [OSTI]

sets and the computer will be dedicated solely to the project for the life of the grant. FundsProposals with computer/laptop and software purchases: In order to use agency funds to pay for computers, software and peripherals, specific language needs to be included as part of your proposal budget

Kurapov, Alexander

259

Building Energy Software Tools Directory: AGI32  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AGI32 AGI32 AGI32 logo. 3D lighting design and rendering software package for electric lighting and daylight analysis. AGI32 produces full-color renderings and predictive lighting system calculations simultaneously for all applications of electric lighting and daylighting in interior and exterior design projects. AGI32 displays dramatic calculation and rendering speeds making repetitive visualizations realistic, and dramatically shortening the conceptual part of the design process. Complex architectural environments are easily created internally, or externally created 3D environments can be imported via DWG or DXF format files. A comprehensive library of manufacturers� lighting product data is included. Screen Shots Keywords lighting, daylighting, rendering, roadway

260

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.  

SciTech Connect (OSTI)

The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management and software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.

Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Bachelor-Fachprojekt ,,Software im Automobil"  

E-Print Network [OSTI]

11 Bachelor-Fachprojekt ,,Software im Automobil" Olaf Spinczyk Arbeitsgruppe Eingebettete.cs.uni-dortmund.de/~spinczyk/ #12;Fachprojekt ,,Software im Automobil" 22 Inhalt Fachprojekte Thema ,,Software im Automobil" Durchführung Generalisierung #12;Fachprojekt ,,Software im Automobil" 33 Fachprojekte ... ... haben stärkeren

Morik, Katharina

262

Policy-Parametric Software Travis Breaux  

E-Print Network [OSTI]

Policy-Parametric Software Travis Breaux Department of Computer Science North Carolina State University tdbreaux@ncsu.edu Abstract Policy-parametric software describes a vision for enterprise software that promotes organizational policy as a computational parameter in future software systems. In the following

Young, R. Michael

263

Agile Software Assessment (Invited Paper) Oscar Nierstrasz  

E-Print Network [OSTI]

Agile Software Assessment (Invited Paper) Oscar Nierstrasz Software Composition Group University in software development, but it is poorly supported by common development environments, which focus mainly on low-level pro- gramming tasks. We posit the need for agile software assessment, which aims to support

Nierstrasz, Oscar

264

Building Technologies Office: Building Energy Optimization Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Building Energy Building Energy Optimization Software to someone by E-mail Share Building Technologies Office: Building Energy Optimization Software on Facebook Tweet about Building Technologies Office: Building Energy Optimization Software on Twitter Bookmark Building Technologies Office: Building Energy Optimization Software on Google Bookmark Building Technologies Office: Building Energy Optimization Software on Delicious Rank Building Technologies Office: Building Energy Optimization Software on Digg Find More places to share Building Technologies Office: Building Energy Optimization Software on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Solar Decathlon Building America Research Innovations Research Tools Building Science Education Climate-Specific Guidance

265

The U.S./IAEA Workshop on Software Sustainability for Safeguards Instrumentation  

SciTech Connect (OSTI)

The U.S. National Nuclear Security Administrations Next Generation Safeguards Initiative, the U.S. Department of State, and the International Atomic Energy Agency (IAEA) organized a a workshop on the subject of Software Sustainability for Safeguards Instrumentation. The workshop was held at the Vienna International Centre in Vienna, Austria, May 6-8, 2014. The workshop participants included software and hardware experts from national laboratories, industry, government, and IAEA member states who were specially selected by the workshop organizers based on their experience with software that is developed for the control and operation of safeguards instrumentation. The workshop included presentations, to orient the participants to the IAEA Department of Safeguards software activities related to instrumentation data collection and processing, and case studies that were designed to inspire discussion of software development, use, maintenance, and upgrades in breakout sessions and to result in recommendations for effective software practices and management. This report summarizes the results of the workshop.

Pepper S. E.; .; Worrall, L.; Pickett, C.; Bachner, K.; Queirolo, A.

2014-08-08T23:59:59.000Z

266

Software Quality Engineering where to find it in Software Engineering Body of Knowledge  

E-Print Network [OSTI]

Software Quality Engineering ­ where to find it in Software Engineering Body of Knowledge (SWEBOK.begnoche.1@ens.etsmtl.ca Abstract Software quality engineering makes its way to wider professional to this of the Software Engineering Body of Knowledge (SWEBOK). As software quality makes the intrinsic part of SWEBOK

Suryn, Witold

267

PNNL OS3300 Alpha/Beta Monitoring System Software and Hardware Operations Manual, Revision 0  

SciTech Connect (OSTI)

This Pacific Northwest National Laboratory (PNNL) OS3300 Alpha/Beta Monitoring System Software and Hardware Operations Manual describes how to install and operate the software and hardware on a personal computer in conjunction with the EG&G Berthold LB150D continuous air monitor. Included are operational details for the software functions, how to read and use the drop-down menus, how to understand readings and calculations, and how to access the database tables.

Barnett, J. M.; Duchsherer, Cheryl J.; Sisk, Daniel R.; Carter, Gregory L.; Douglas, David D.; Carrell, Dorothy M.

2006-01-25T23:59:59.000Z

268

PNNL OS3700 Tritium Monitoring System Software and Hardware Operations Manual, Revision 0  

SciTech Connect (OSTI)

The PNNL OS3700 Tritium Monitoring System Software and Hardware Operations Manual describes herein how to install and operate the software and hardware on a personal computer in conjunction with the Berthold LB110 flow-through proportional counter detector system. Included are operational details for the software functions, how to read and use the drop-down menus, how to understand readings and calculations, and how to access the database tables.

Barnett, J M.; Duchsherer, Cheryl J.; Sisk, Daniel R.; Carrell, Dorothy M.; Douglas, David D.; Carter, Gregory L.

2005-11-09T23:59:59.000Z

269

Vehicle Technologies Office: Software Tools  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Tools Software Tools Several software programs are available, either for free or for a nominal charge, that can assist fleet managers and technology developers in assessing the potential impacts of implementing new technologies. Autonomie Autonomie is a Plug-and-Play Powertrain and Vehicle Model Architecture and Development Environment to support the rapid evaluation of new powertrain/propulsion technologies for improving fuel economy through virtual design and analysis in a math-based simulation environment. Developed in partnership with General Motors, Autonomie is an open architecture to support the rapid integration and analysis of powertrain/propulsion systems and technologies for rapid technology sorting and evaluation of fuel economy improvement under dynamic/transient testing conditions. The capability to sort technologies rapidly in a virtual design environment results in faster improvements in real-world fuel consumption by reducing the time necessary to develop and bring new technologies onto our roads.

270

Building Software Tools with Interoperability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 4 Building Software Tools with Interoperability Vladimir Bazjanac, Ricardo Goncalves and Manfred Koethe. Vladimir Bazjanac (left) chairs the open IAI research advisory committee meeting held at San Diego in June. Next to him are Ricardo Goncalves, UNINOVA, and Manfred Koethe, DEC. Recently, architects and engineers (A&E) have begun to make building design and energy simulation software an indispensable part of their toolbox. Most A&E firms now use commercial, off-the-shelf design assistance programs. An increasing number of building professionals are also using software developed at the Center's Building Technology Program: the whole-building energy simulation program DOE-2 to design more energy-efficient structures, RADIANCE for simulating lighting designs, and WINDOW for calculating the

271

CIMx Software | Open Energy Information  

Open Energy Info (EERE)

CIMx Software CIMx Software Jump to: navigation, search Name CIMx Software Address 1001 Ford Circle Place Milford, Ohio Zip 45150 Sector Renewable Energy, Services, Solar, Wind energy Product Consulting; Manufacturing; Research and development; Trainining and education;Other:Green Factories Phone number 513-248-7700 Website http://www.cimx.com Coordinates 39.1556865°, -84.2518821° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.1556865,"lon":-84.2518821,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

272

U. S. DOE petroleum software  

SciTech Connect (OSTI)

Each year, the U.S. DOE sponsors a variety of petroleum-related research projects. Some of the past projects have resulted in development of software that is available free from the DOE's Bartlesville Project Office. This article gives an overview of the following DOE software: Black Oil Applied Simulation Tool I (BOAST II); EOR Predictive Models: CO{sub 2} Miscible Flood, Chemical Flood, Polymer Flood, In-Situ Combustion Steamflood; Horizontal/Slanted Well Model; and Miscible Applied Simulation Techniques (MASTER).

Schneider, C.E. (Conoco Inc. (US))

1991-07-01T23:59:59.000Z

273

Computed Tomography software and standards  

SciTech Connect (OSTI)

This document establishes the software design, nomenclature, and conventions for industrial Computed Tomography (CT) used in the Nondestructive Evaluation Section at Lawrence Livermore National Laboratory. It is mainly a users guide to the technical use of the CT computer codes, but also presents a proposed standard for describing CT experiments and reconstructions. Each part of this document specifies different aspects of the CT software organization. A set of tables at the end describes the CT parameters of interest in our project. 4 refs., 6 figs., 1 tab.

Azevedo, S.G.; Martz, H.E.; Skeate, M.F.; Schneberk, D.J.; Roberson, G.P.

1990-02-20T23:59:59.000Z

274

Building Energy Software Tools Directory: AFT Fathom  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFT Fathom AFT Fathom AFT Fathom logo. AFT Fathom is a general-purpose pipe network analysis tool that can be used to simulate any incompressible fluid flow problem. Fathom is widely used to design chilled water and hot water systems, fire suppression systems, water distribution, chemical process plants, and HVAC duct systems. Fathom includes extensive built-in databases of fluids (liquids and gases), pipe materials, pipe fittings, and insulation materials. Fathom includes integrated heat transfer capabilities to model piping heat transfer and heat exchangers. Screen Shots Keywords design, pump selection, pipe analysis, duct design, duct sizing, chilled water systems, hot water system Validation/Testing N / A Expertise Required Engineering background in piping or duct design required to use software

275

Software Implementation of Source Code Quality Analysis and Evaluation for Weapon Systems Software  

Science Journals Connector (OSTI)

DESIS(DEfense Software Information System) is being developed to manage and maintain weapon systems software as a whole in defense ... the system is to evaluate software quality of weapon systems, analyze whether...

Seill Kim; Youngkyu Park

2012-01-01T23:59:59.000Z

276

Assisting the searcher: utilizing software  

E-Print Network [OSTI]

Assisting the searcher: utilizing software agents for Web search systems Bernard J. Jansen and Udo, ineffectiveness in expanding results, and the inability to reduce results to a manageable number (Jansen et al; however, searchers seldom utilize these features (Jansen and Pooch, 2001). Others researchers have

Jansen, James

277

Software Testing Jos de Kloe,  

E-Print Network [OSTI]

/GUI interfaces) Integration tests: automatisch verzenden van files naar ECMWF triggeren van processen bij ECMWF Document SVVP=Software Validation and Verification Plan #12;MMM, J. de Kloe, 2 maart 2009 7 GSOV testing Werking van algorithmes Werking van allerhande scripts Complete processor Controleer ook dat foutieve

Stoffelen, Ad

278

Teaching software construction to physicists  

Science Journals Connector (OSTI)

An invisible issue has arisen while teaching numerical and simulation methods applied to physicstraining students to write clear and reliable programs. Appropriate elements are extracted from the field of software engineering and applied to the special problems that face students faculty and researchers who write computer programs for doing physics.

Edward H. Carlson

1989-01-01T23:59:59.000Z

279

Software & GRID Computing for LHC  

E-Print Network [OSTI]

Software & GRID Computing for LHC (Computing Work in a Big Group) Frederick Luehring luehring: ­ A short introduction about the LHC and ATLAS · LHC/ATLAS serves as an example of large scale scientific/P609 Presentation F. Luehring Pg. 3 #12;A Little About LHC & ATLAS February 10, 2011 P410/P609

Evans, Hal

280

Software tools for HVAC research  

Science Journals Connector (OSTI)

Energy saving methods can be employed to reduce energy consumption in buildings, or improve indoor thermal conditions. An example of those methods is the use of permeable coverings, but there are other important parameters like thermal inertia. To understand ... Keywords: Building, Computer, Design, Energy saving, HVAC, Software tools

Jos A. Orosa; Armando C. Oliveira

2011-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Mercury reuses several external software tools developed by ORNL  

E-Print Network [OSTI]

Mercury reuses several external software tools developed by ORNL DAAC and other organizations-on,canopychemistryaccpclimatecollectionseoslandvalidationFIFEFIFEfollow-on fluxnethydroclimatologycollectionsmodelarchivenetprimaryproductivityNPPNBIIMAST- DCUSANPNIABINDataONEWENDI Mercury's architecture includes 1) a harvesting engine was packaged in such a way that all the Mercury projects will use the same harvester scripts, but each project

282

Software Requirements Specification Verifiable Fuel Cycle Simulation (VISION) Model  

SciTech Connect (OSTI)

The purpose of this Software Requirements Specification (SRS) is to define the top-level requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). This simulation model is intended to serve a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies.

D. E. Shropshire; W. H. West

2005-11-01T23:59:59.000Z

283

IT Operational Oversight Committee Round #4: Software Licensing Strategies Team  

E-Print Network [OSTI]

, University Development Office Cliff Johnston* , Professor of Soil Chemistry, College of Agriculture Julie license purchasing and management. The team evaluated software purchasing and licensing information from a variety of sources that included data from central purchasing (i.e., SRM), credit card purchases (not

284

Appendix B - Audio-Related Libraries and Software  

Science Journals Connector (OSTI)

Abstract This appendix presents several 3d-party audio analysis libraries and methodologies, covering various programming languages (including MATLAB-based software). Furthermore, non-audio libraries and packages from the fields of pattern recognition, signal processing, etc, are presented. Although our primary focus is on MATLAB-based code, we also provide a flavour of Python and C/C++ resources

Theodoros Giannakopoulos; Aggelos Pikrakis

2014-01-01T23:59:59.000Z

285

Character String Predicate Based Automatic Software Test Data Generation  

E-Print Network [OSTI]

Character String Predicate Based Automatic Software Test Data Generation Ruilian Zhao Computer is an important element in programming. A problem that needs further research is how to automatically generate generation of program paths including character string predicates, and the effectiveness of this approach

Lyu, Michael R.

286

Survey for Safety Software Used in Design of Structures, Systems, and Components  

Broader source: Energy.gov (indexed) [DOE]

Design Software Survey September 2003 1 Design Software Survey September 2003 1 Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan for Software Quality Assurance (SQA) that was developed in response to Defense Nuclear Facilities Safety Board Recommendation 2002-01, Quality Assurance for Safety-Related Software, includes a commitment (4.2.1.5) to conduct a survey of design codes currently in use to determine if any should be included as part of the toolbox codes. The toolbox codes are a small number of standard computer models (codes) supporting DOE safety analysis that have widespread use and appropriate qualification. Generally, the toolbox codes will have been developed and maintained within the DOE complex. However, the toolbox may also include

287

Sandia Software Guidelines, Volume 2. Documentation  

SciTech Connect (OSTI)

This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standards for software documentation, this volume provides guidance in the selection of an adequate document set for a software project and example formats for many types of software documentation. A tutorial on life cycle documentation is also provided. Extended document thematic outlines and working examples of software documents are available on electronic media as an extension of this volume.

NONE

1995-09-01T23:59:59.000Z

288

--------Original Message --------Subject: [robo-ms] Fwd: Software Engineer for Rotorcraft Robotics and Simulation  

E-Print Network [OSTI]

> * ISO 9001, SEI, CMM, CMMI process > Candidate must bring a BSCS, BSEE, BSCE or equivalent experience. > > RESPONSIBILITIES: Assist in design, implementation, modification, test, and documentation of software for VTOL UAS System (VMS) and implement/integrate the avionics software. Future work will include participation

Plotkin, Joshua B.

289

j-POST: a Java Toolchain for Property-Oriented Software Testing  

E-Print Network [OSTI]

MBT 2008 j-POST: a Java Toolchain for Property-Oriented Software Testing Yli`es Falcone1 Laurent-POST is an integrated toolchain for property-oriented software testing. This toolchain includes a test designer, a test generator, and a test execution engine. The test generation is based on an original approach which consists

Paris-Sud XI, Université de

290

Honeywell Modular Automation System Computer Software Documentation for the Magnesium Hydroxide Precipitation Process  

SciTech Connect (OSTI)

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP) for the Magnesium Hydroxide Precipitation Process in Rm 230C/234-5Z. The magnesium hydroxide process control software Rev 0 is being updated to include control programming for a second hot plate. The process control programming was performed by the system administrator. Software testing for the additional hot plate was performed per PFP Job Control Work Package 2Z-00-1703. The software testing was verified by Quality Control to comply with OSD-Z-184-00044, Magnesium Hydroxide Precipitation Process.

STUBBS, A.M.

2001-06-25T23:59:59.000Z

291

Representation of Limited Rights Data and Restricted Computer Software  

Broader source: Energy.gov (indexed) [DOE]

August 2005 August 2005 Applicant Name___________________________________ Announcement Number______________________________ Representation of Limited Rights Data and Restricted Computer Software (a) Any data delivered under an award resulting from this announcement is subject to the Rights in Data - General or the Rights in Data - Programs Covered Under Special Data Statutes clause (See Intellectual Property Provisions at http://www.gc.energy.gov/financial_assistance_awards.htm). Under these clauses, the Recipient may withhold from delivery data that qualify as limited rights data or restricted computer software. As an aid in determining the Government's need to include Alternate

292

Risk Analysis and Decision-Making Software Package (1997 Version) User Manual  

SciTech Connect (OSTI)

This manual provides instructions for using the U.S. Department of Energy's (DOE) risk analysis and decision making software (1997 version) developed at BDM Petroleum Technologies by BDM-Oklahoma, Inc. for DOE, under contract No. DE-AC22-94PC91OO8. This software provides petroleum producers with a simple, handy tool for exploration and production risk analysis and decision-making. It collects useful risk analysis tools in one package so that users do not have to use several programs separately. The software is simple to use, but still provides many functions. The 1997 version of the software package includes the following tools: (1) Investment risk (Gambler's ruin) analysis; (2) Monte Carlo simulation; (3) Best fit for distribution functions; (4) Sample and rank correlation; (5) Enhanced oil recovery method screening; and (6) artificial neural network. This software package is subject to change. Suggestions and comments from users are welcome and will be considered for future modifications and enhancements of the software. Please check the opening screen of the software for the current contact information. In the future, more tools will be added to this software package. This manual includes instructions on how to use the software but does not attempt to fully explain the theory and algorithms used to create it.

Chung, F.T.H.

1999-02-11T23:59:59.000Z

293

Building Energy Software Tools Directory: DesignBuilder  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DesignBuilder DesignBuilder DesignBuilder logo User-friendly modelling environment where you can work (and play) with building models. It provides a range of environmental performance data such as: energy consumption, internal comfort data and HVAC component sizes. Output is based on detailed sub-hourly simulation time steps using the EnergyPlus simulation engine. DesignBuilder can be used for simulations of many common HVAC types, naturally ventilated buildings, buildings with daylighting control, double facades, advanced solar shading strategies etc. Screen Shots Keywords Building energy simulation, visualisation, CO2 emissions, solar shading, natural ventilation, daylighting, comfort studies, CFD, HVAC simulation, pre-design, early-stage design, building energy code compliance checking,

294

Building Energy Software Tools Directory: Autodesk Green Building Studio  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Autodesk Green Building Studio Autodesk Green Building Studio Green Building Studio logo. Seamlessly links architectural building information models (BIM) and certain 3-D CAD building designs with energy, water, and carbon analysis. Autodesk Green Building Studio enables architects to quickly calculate the operational and energy implications of early design decisions. The Autodesk Green Building Studio web service automatically generates geometrically accurate, detailed input files for major energy simulation programs. Green Building Studio uses the DOE-2.2 simulation engine to calculate energy performance and also creates geometrically accurate input files for EnergyPlus. Key to the integrated interoperability exhibited is the gbXML schema, an open XML schema of the International Alliance of

295

Free Software in Astronomy: Fedora Astronomy  

Science Journals Connector (OSTI)

An important part of the tools used journal of the astronomical community are free software. Since the ideals of the free-software community, freedom to use and share programs, are very close to the ideals of ...

S. Pascual

2010-01-01T23:59:59.000Z

296

Regulatory software configuration management system design  

Science Journals Connector (OSTI)

The gap between nuclear safety-related regulations and the commercial software configuration management causes software quality concerns for Digital Control and Information System (DCIS) of a nuclear power plant. The main reason is that the DCIS of a ...

I-Hsin Chou; Chin-Feng Fan

2006-09-01T23:59:59.000Z

297

MASTER OF TECHNOLOGY IN SOFTWARE ENGINEERING  

E-Print Network [OSTI]

MASTER OF TECHNOLOGY IN SOFTWARE ENGINEERING LEAD in delivering ADVANCED HIGH QUALITY as government institutions, to engineer high quality computing solutions for greater competitive advantage their business strategies. Advanced software engineering is changing how the world conducts business

Chaudhuri, Sanjay

298

Global expansion strategies for software firms  

E-Print Network [OSTI]

The business competition in the software industry is increasingly becoming a global competition. In this era with a fast-paced innovative environment, strategy plays an important role for managers in software companies in ...

Yoden, Michihiko

2014-01-01T23:59:59.000Z

299

Web-Based Software Vendor Management Application  

E-Print Network [OSTI]

At XYZ Technologies, Inc., the lack of standardized processes and tools to manage different software vendors is costing the company time and money. Visibility and the ability to track software vendor transactions are limited ...

Puppala, Naresh

2010-05-14T23:59:59.000Z

300

Max-CSP Approach for Software Diagnosis  

Science Journals Connector (OSTI)

In software development is essential to have tools for the software diagnosis to help the programmers and development engineers to locate the bugs. In this paper, we propose a new approach that identifies the pos...

R. Ceballos; Rafael M. Gasca

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Progress in Addressing DNFSB Recommendation 2002-1 Issues: Improving Accident Analysis Software Applications  

SciTech Connect (OSTI)

Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2002-1 (''Quality Assurance for Safety-Related Software'') identified a number of quality assurance issues on the use of software in Department of Energy (DOE) facilities for analyzing hazards, and designing and operating controls to prevent or mitigate potential accidents. Over the last year, DOE has begun several processes and programs as part of the Implementation Plan commitments, and in particular, has made significant progress in addressing several sets of issues particularly important in the application of software for performing hazard and accident analysis. The work discussed here demonstrates that through these actions, Software Quality Assurance (SQA) guidance and software tools are available that can be used to improve resulting safety analysis. Specifically, five of the primary actions corresponding to the commitments made in the Implementation Plan to Recommendation 2002-1 are identified and discussed in this paper. Included are the web-based DOE SQA Knowledge Portal and the Central Registry, guidance and gap analysis reports, electronic bulletin board and discussion forum, and a DOE safety software guide. These SQA products can benefit DOE safety contractors in the development of hazard and accident analysis by precluding inappropriate software applications and utilizing best practices when incorporating software results to safety basis documentation. The improvement actions discussed here mark a beginning to establishing stronger, standard-compliant programs, practices, and processes in SQA among safety software users, managers, and reviewers throughout the DOE Complex. Additional effort is needed, however, particularly in: (1) processes to add new software applications to the DOE Safety Software Toolbox; (2) improving the effectiveness of software issue communication; and (3) promoting a safety software quality assurance culture.

VINCENT, ANDREW

2005-04-25T23:59:59.000Z

302

Building Energy Software Tools Directory: EnergyAide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EnergyAide EnergyAide EnergyAide logo. Comprehensive residential energy audit software package. The EnergyAide software can evaluate a broad range of energy saving opportunities in the home, including: Insulation Heating system improvements Window and door weather-stripping and replacement Domestic hot water savings Efficient Lighting Other energy saving recommendations EnergyAide is designed to serve homeowners or residential utility customers. It produces a written report that explains energy savings opportunities in plain language, for non-professional to easily understand, with graphics. The report and the software can be customized to meet the needs of conservation programs, utility sponsors and users. Energy savings and costs for recommendations can be interactively viewed

303

Cost Model and Cost Estimating Software  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This chapter discusses a formalized methodology is basically a cost model, which forms the basis for estimating software.

1997-03-28T23:59:59.000Z

304

@ work' video segment features Robotic Software Engineer  

SciTech Connect (OSTI)

@ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

Idaho National Laboratory

2008-03-27T23:59:59.000Z

305

@ work' video segment features Robotic Software Engineer  

ScienceCinema (OSTI)

@ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

Idaho National Laboratory

2010-01-08T23:59:59.000Z

306

The IBM Cleanroom software engineering technology transfer program  

Science Journals Connector (OSTI)

Cleanroom software engineering is a theory-based, team ... developing zero-defect software with high probability. Cleanroom places software development under statistical quality control ... certification of produ...

Richard C. Linger; R. Alan Spangler

1992-01-01T23:59:59.000Z

307

Turbine Aeration Physical Modeling and Software Design | Department...  

Broader source: Energy.gov (indexed) [DOE]

Turbine Aeration Physical Modeling and Software Design Turbine Aeration Physical Modeling and Software Design Turbine Aeration Physical Modeling and Software Design...

308

Software Quality: A Guide to Responsibilities and Resources,...  

Office of Environmental Management (EM)

Software Quality: A Guide to Responsibilities and Resources, SQAS Software Quality: A Guide to Responsibilities and Resources, SQAS This Guide provides guidance to the software...

309

Preparation for a Software Quality Audit | Department of Energy  

Office of Environmental Management (EM)

Preparation for a Software Quality Audit Preparation for a Software Quality Audit This document will enable a site to prepare for a software quality audit by providing specific...

310

NMMSS Software Quality Assurance Plan | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

NMMSS Software Quality Assurance Plan NMMSS Software Quality Assurance Plan The Software Quality Assurance Plan (SQAP) for the Nuclear Materials Management and Safeguard System...

311

Software Quality Assurance Control of Existing Systems | Department...  

Office of Environmental Management (EM)

Software Quality Assurance Control of Existing Systems Software Quality Assurance Control of Existing Systems Existing software systems often represent significant investments and...

312

An automated testing system for telephony software - A case study.  

E-Print Network [OSTI]

??As the complexity of software system increases, delivering quality software successfully becomes an ever more challenging task. Applying automated testing techniques effectively to the software (more)

Zhou, Yingxiang Ingrid

2009-01-01T23:59:59.000Z

313

Table of contents 1 What is software architecture? ......................................................................... 1  

E-Print Network [OSTI]

Table of contents 1 What is software architecture? ......................................................................... 1 1.1 Software architecture as abstraction ............................................................ 2 1.2 Software architecture as blueprint

Dustdar, Schahram

314

Follow-the-Sun Software Development: Controlled Experiment.  

E-Print Network [OSTI]

??Context: Global software development (GSD) can be defined as distributing the software development work among various teams, which are geographically distributed. Global software development is (more)

Pamulapati, Saroj

2011-01-01T23:59:59.000Z

315

Hardware/Software Solution Unifying DALI, IBECS,  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hardware/Software Solution Unifying DALI, IBECS, Hardware/Software Solution Unifying DALI, IBECS, and BACnet Final Report Contributors: Ed Koch (Akua Controls) Francis Rubinstein Sila Kiliccote Report on Hardware/Software Solution Unifying DALI, IBECS, and BACnet 1 Table of Contents Executive Summary................................................................................................................................3 Introduction.............................................................................................................................................4 Context....................................................................................................................................................4 Control Strategies ..............................................................................................................................................

316

Open Source Software: Management, Diffusion and Competition  

E-Print Network [OSTI]

and competitive environment such as the ICT market. 1 Introduction OSS is an alternative model of software has introduced an innovative model of software development, based on self-organized communitiesOpen Source Software: Management, Diffusion and Competition Spyridoula Lakkaé National

Kouroupetroglou, Georgios

317

Pattern Repositories for Software Engineering Education  

E-Print Network [OSTI]

software engineering attacks its complexity problems by apply- ing well-understood development principles patterns can serve as an excel- lent set of use cases for organizational memories, for software development larger and more complex most software development paradigms agree that some planning-ahead is needed

318

Software Cost Reduction Constance L. Heitmeyer  

E-Print Network [OSTI]

Software Cost Reduction Constance L. Heitmeyer Introduction Software Cost Reduction SCR is a set Research Laboratory NRL beginning in the late 1970s. A major goal of the original SCR research team Variable Model 37 and the SCR requirements model 15 , and a set of software tools for analyzing SCR

319

A Mathematical Perspective For Software Measures Research  

E-Print Network [OSTI]

A Mathematical Perspective For Software Measures Research Austin C. Melton y , David A. Gustafsonz software measures research. In the prevailing paradigm for the validation of software measures there is a fundamental assumption that the sets of measured documents are ordered, and that measures should report

Bieman, James M.

320

An integrated cost model for software reuse  

Science Journals Connector (OSTI)

Several cost models have been proposed in the past for estimating, predicting, and analyzing the costs of software reuse. In this paper we analyze existing models, explain their variance, and propose a tool-supported comprehensive model that encompasses ... Keywords: COCOMO, application engineering, component engineering, domain engineering, return on investment, software cost estimation, software reuse

A. Mili; S. Fowler Chmiel; R. Gottumukkala; L. Zhang

2000-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Describing and Analyzing Distributed Software System Designs  

E-Print Network [OSTI]

Describing and Analyzing Distributed Software System Designs GEORGE S. AVRUNIN and JACK C. WILEDEN by applying it to a realistic distributed software-system design problem involving mutual exclusion Additional Key Words and Phrases: Analysis of software design, design notation, distributed mutual exclusion

Avrunin, George S.

322

On the reconfiguration of software connectors  

Science Journals Connector (OSTI)

Software connectors encapsulate interaction patterns between services in complex, distributed service-oriented applications. Such patterns evolve over time, in response to faults, changes in the expected QoS levels, emergent requirements or the reassessment ... Keywords: architectural reconfiguration, reconfiguration, software architecture, software connectors

Nuno Oliveira; Lus S. Barbosa

2013-03-01T23:59:59.000Z

323

Embracing Agile Development of Usable Software Systems  

E-Print Network [OSTI]

Embracing Agile Development of Usable Software Systems AbstractJason Chong Lee Center for Human. This is becoming evident in the emerging field of agile software development which has largely ignored or been programming--an agile software development process, and scenario-based design--a usability engineering process

McCrickard, Scott

324

Integrating Management and Engineering Processes in Software  

E-Print Network [OSTI]

. The research is performed in cooperation with several companies developing software products in differentIntegrating Management and Engineering Processes in Software Product Development Daniel Karlström Processes in Software Product Development 2 ISSN 1101-3931 ISRN LUTEDX/TETS- -1069- -SE+230P Printed

325

EASE for Industrial Excellence in Software  

E-Print Network [OSTI]

and fail in another, the research project focuses on viewing agile software develop- ment from different. Furthermore, it will provide a basis for defining and measuring agility in software industry, says SamirehEASE for Industrial Excellence in Software Activity Report 2010 for Industry Excellence Center

326

Software Architecture Evolution Olivier Barais1  

E-Print Network [OSTI]

1 Software Architecture Evolution Olivier Barais1 , Anne Franc¸oise Le Meur2 , Laurence Duchien2 and detailed treatment of the var- ious state-of-the-art approaches to evolving software architectures. Furthermore, we discuss one particular framework for software architecture evolution in more detail. 1

Paris-Sud XI, Université de

327

West Virginia University 1 Software Engineering  

E-Print Network [OSTI]

West Virginia University 1 Software Engineering Degrees Offered � Masters of Science in Software Engineering � Masters of Science in Engineering with a major in Software Engineering Program Description The Lane Department of Computer Science and Electrical Engineering offers professionally oriented Masters

Mohaghegh, Shahab

328

RSVC: A Reliable Distributed Control Software Development Toolkit Control Software Group  

E-Print Network [OSTI]

RSVC: A Reliable Distributed Control Software Development Toolkit Jie Chen Control Software Group- velop a toolkit for building reliable and fault-tolerant distributed software. This paper describes a C++ toolkit (RSVC) that reduces e ort of development of reliable distributed control software. Keywords

Mao, Weizhen

329

Building Energy Software Tools Directory: PVSYST  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PVSYST PVSYST PVSYST logo. Software for the study, sizing, simulation and data analysis of complete PV systems. It is suitable for grid-connected, stand-alone and DC-grid (public transport) systems, and offers an extensive meteorological and PV-components database. It includes a CAO tool for detailed shading analysis. PVSYST offers an ergonomic approach, with greenline guide, and several project levels. Screen Shots Keywords PV system sizing, PV system simulation, grid-connected PV systems, stand-alone PV systems, shading, solar tools Validation/Testing Performed for 7 installations in Switzerland. Detailed results are in the Help. Expertise Required Basic knowledge about solar energy and photovoltaics. Some basic concepts are developed in the contextual help system.

330

Building Energy Software Tools Directory: Maintenance Edge  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Maintenance Edge Maintenance Edge Maintenance Edge logo Maintenance Edge is a suite of online Software as a Service (SaaS) facility management tools that gives control and management over buildings without a capital investment. Maintenance Edge enables you to combine work order, planned maintenance, work order wireless, and critical alarms with the option of adding inventory. Fully implemented, Maintenance Edge will cut labor time, increase energy efficiencies, save on capital expenditures, and save on budget and management time. Features include: easy/user-friendly work order requesting, unlimited users, seven different user roles (limits data users can see), no capital or hardware costs required, access to data anywhere anytime, easy-to-click reporting on all the data in your system,

331

Building Energy Software Tools Directory: ENFORMA  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ENFORMA ENFORMA ENFORMA logo. Includes the MicroDataLogger portable data acquisition equipment and HVAC and Lighting Analyzer software. ENFORMA is designed to cost-effectively gather data and convert it into information about building performance. ENFORMA provides a unique solution that can gather the data at a minimal cost and help you determine solutions to typical building problems. This detailed diagnostic information is the key that allows you to improve upon your current services or expand into new business opportunities. ENFORMA solutions typically result in projects with paybacks of less than one year. ENFORMA solutions can help you improve upon or begin doing the following services: Performance Guarantees, Comfort Trouble Shooting, HVAC Operation Outsourcing, Commissioning, Accurate Equipment Tune-ups, and Energy

332

Grid Software and Services at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Services Services Grid Software and Services Overview Grid computing can include a broad range of technologies. At NERSC we are interested in new computational and data-centric services which enhance the productivity of science teams. The grid infrastructure we support (described below) can be used to manage jobs and data in ways that are otherwise difficult from the comamnd line. Grid services enable remote job management, file transfer and distributed computing workflows through the Globus Toolkit. Web based Science Gateways can be built on the foundation provided by those services. Users can access several NERSC resources via Globus grid interfaces using X509 grid certificates. NERSC is part of the Open Science Grid (OSG) and is available to select OSG Virtual Organizations for compute and storage

333

Argonne TTRDC - Modeling, Simulation & Software - Autonomie  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Component-in-the-Loop Component-in-the-Loop To reduce development time and introduce technologies faster to the market, many companies have been turning more and more to Model Based Design. In Model Based Design, the development process centers around a system model, from requirements capture and design to implementation and test. Engineers can skip over a generation of system design processes on the basis of hand coding and use graphical models to design, analyze, and implement the software that determines machine performance and behavior. One of the steps of Model Based Design is Component-in-the-Loop. Engineers in Argonne National Laboratory's Center for Transportation Research have developed Component-in-the-Loop (CIL) systems and processes to evaluate the impact of vehicle energy management schemes, component control unit parameters, powertrain configurations on fuel and/or electrical consumption. Argonne has used the CIL for several components, including:

334

TRANSIMS software architecture for IOC-1  

SciTech Connect (OSTI)

This document describes the TRANSIMS software architecture and high-level design for the first Interim Operational Capability (IOC-1). Our primary goal in establishing the TRANSIMS software architecture is to lay down a framework for IOC-1. We aim to make sure that the various components of TRANSIMS are effectively integrated, both for IOC-1 and beyond, so that TRANSIMS remains flexible, expandable, portable, and maintainable throughout its lifetime. In addition to outlining the high-level design of the TRANSIMS software, we also set forth the software development environment and software engineering practices used for TRANSIMS.

Berkbigler, K.P.; Bush, B.W.; Davis, J.F.

1997-04-03T23:59:59.000Z

335

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect (OSTI)

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). This CSWD describes hardware and PFP developed software for control of stabilization furnaces. The Honeywell software can generate configuration reports for the developed control software. These reports are described in the following section and are attached as addendum's. This plan applies to PFP Engineering Manager, Thermal Stabilization Cognizant Engineers, and the Shift Technical Advisors responsible for the Honeywell MAS software/hardware and administration of the Honeywell System.

STUBBS, A.M.

2000-12-04T23:59:59.000Z

336

AIRMaster: Compressed air system audit software  

SciTech Connect (OSTI)

The project goal was to develop a software tool, AIRMaster, and a methodology for performing compressed air system audits. AIRMaster and supporting manuals are designed for general auditors or plant personnel to evaluate compressed air system operation with simple instrumentation during a short-term audit. AIRMaster provides a systematic approach to compressed air system audits, analyzing collected data, and reporting results. AIRMaster focuses on inexpensive Operation and Maintenance (O and M) measures, such as fixing air leaks and improving controls that can significantly improve performance and reliability of the compressed air system, without significant risk to production. An experienced auditor can perform an audit, analyze collected data, and produce results in 2--3 days. AIRMaster reduces the cost of an audit, thus freeing funds to implement recommendations. The AIRMaster package includes an Audit Manual, Software and User's manual, Analysis Methodology Manual, and a Case Studies summary report. It also includes a Self-Guided Tour booklet to help users quickly screen a plant for efficiency improvement potentials, and an Industrial Compressed Air Systems Energy Efficiency Guidebook. AIRMaster proved to be a fast and effective audit tool. In sever audits AIRMaster identified energy savings of 4,056,000 kWh, or 49.2% of annual compressor energy use, for a cost savings of $152,000. Total implementation costs were $94,700 for a project payback period of 0.6 years. Available airflow increased between 11% and 51% of plant compressor capacity, leading to potential capital benefits from 40% to 230% of first year energy savings.

Wheeler, G.M.; Bessey, E.G.; McGill, R.D.; Vischer, K.

1997-07-01T23:59:59.000Z

337

Software reliability models for critical applications  

SciTech Connect (OSTI)

This report presents the results of the first phase of the ongoing EG&G Idaho, Inc. Software Reliability Research Program. The program is studying the existing software reliability models and proposes a state-of-the-art software reliability model that is relevant to the nuclear reactor control environment. This report consists of three parts: (1) summaries of the literature review of existing software reliability and fault tolerant software reliability models and their related issues, (2) proposed technique for software reliability enhancement, and (3) general discussion and future research. The development of this proposed state-of-the-art software reliability model will be performed in the second place. 407 refs., 4 figs., 2 tabs.

Pham, H.; Pham, M.

1991-12-01T23:59:59.000Z

338

Software reliability models for critical applications  

SciTech Connect (OSTI)

This report presents the results of the first phase of the ongoing EG G Idaho, Inc. Software Reliability Research Program. The program is studying the existing software reliability models and proposes a state-of-the-art software reliability model that is relevant to the nuclear reactor control environment. This report consists of three parts: (1) summaries of the literature review of existing software reliability and fault tolerant software reliability models and their related issues, (2) proposed technique for software reliability enhancement, and (3) general discussion and future research. The development of this proposed state-of-the-art software reliability model will be performed in the second place. 407 refs., 4 figs., 2 tabs.

Pham, H.; Pham, M.

1991-12-01T23:59:59.000Z

339

Eiffel*: A Language and Environment for Software Engineering  

E-Print Network [OSTI]

Eiffel*: A Language and Environment for Software Engineering Bertrand Meyer Interactive Software Engineering Inc., Goleta, California The Eiffel language and environment address the prob lem of building quality software in practical develop- ment environments. Two software quality factors were deemed

Meyer, Bertrand

340

Independent Verification and Validation Of SAPHIRE 8 Software Design and Interface Design Project Number: N6423 U.S. Nuclear Regulatory Commission  

SciTech Connect (OSTI)

The purpose of the Independent Verification and Validation (IV&V) role in the evaluation of the SAPHIRE software design and interface design is to assess the activities that results in the development, documentation, and review of a software design that meets the requirements defined in the software requirements documentation. The IV&V team began this endeavor after the software engineering and software development of SAPHIRE had already been in production. IV&V reviewed the requirements specified in the NRC Form 189s to verify these requirements were included in SAPHIREs Software Verification and Validation Plan (SVVP) design specification.

Kent Norris

2009-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Independent Verification and Validation Of SAPHIRE 8 Software Design and Interface Design Project Number: N6423 U.S. Nuclear Regulatory Commission  

SciTech Connect (OSTI)

The purpose of the Independent Verification and Validation (IV&V) role in the evaluation of the SAPHIRE software design and interface design is to assess the activities that results in the development, documentation, and review of a software design that meets the requirements defined in the software requirements documentation. The IV&V team began this endeavor after the software engineering and software development of SAPHIRE had already been in production. IV&V reviewed the requirements specified in the NRC Form 189s to verify these requirements were included in SAPHIREs Software Verification and Validation Plan (SVVP) design specification.

Kent Norris

2010-03-01T23:59:59.000Z

342

Software Configuration Management (SCM) A Practical Guide | Department of  

Broader source: Energy.gov (indexed) [DOE]

Software Configuration Management (SCM) A Practical Guide Software Configuration Management (SCM) A Practical Guide Software Configuration Management (SCM) A Practical Guide This document provides a practical guide for integrating software configuration management disciplines into the management of software engineering projects. Software configuration management is the process of identifying and defining the software configuration items in a system, controlling the release and change of these items throughout the system lifecycle, recording and reporting the status of configuration items and change requests, and verifying the completeness and correctness of configuration items Software Configuration Management (SCM) A Practical Guide More Documents & Publications NMMSS Software Quality Assurance Plan SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration

343

Functional Testing Protocols for Commercial Building Efficiency Baseline Modeling Software  

E-Print Network [OSTI]

Commercial Building Efficiency Baseline Modeling SoftwareCommercial Building Efficiency Baseline Modeling Software ETCommercial Building Energy Baseline Modeling

Jump, David

2014-01-01T23:59:59.000Z

344

Independent Verification and Validation Of SAPHIRE 8 Software Requirements Project Number: N6423 U.S. Nuclear Regulatory Commission  

SciTech Connect (OSTI)

The purpose of the Independent Verification and Validation (IV&V) role in the evaluation of the SAPHIRE requirements definition is to assess the activities that results in the specification, documentation, and review of the requirements that the software product must satisfy, including functionality, performance, design constraints, attributes and external interfaces. The IV&V team began this endeavor after the software engineering and software development of SAPHIRE had already been in production. IV&V reviewed the requirements specified in the NRC Form 189s to verify these requirements were included in SAPHIREs Software Verification and Validation Plan (SVVP).

Kent Norris

2010-03-01T23:59:59.000Z

345

Independent Verification and Validation Of SAPHIRE 8 Software Requirements Project Number: N6423 U.S. Nuclear Regulatory Commission  

SciTech Connect (OSTI)

The purpose of the Independent Verification and Validation (IV&V) role in the evaluation of the SAPHIRE requirements definition is to assess the activities that results in the specification, documentation, and review of the requirements that the software product must satisfy, including functionality, performance, design constraints, attributes and external interfaces. The IV&V team began this endeavor after the software engineering and software development of SAPHIRE had already been in production. IV&V reviewed the requirements specified in the NRC Form 189s to verify these requirements were included in SAPHIREs Software Verification and Validation Plan (SVVP).

Kent Norris

2009-09-01T23:59:59.000Z

346

Autonomous software: Myth or magic?  

E-Print Network [OSTI]

We discuss work by the eSTAR project which demonstrates a fully closed loop autonomous system for the follow up of possible micro-lensing anomalies. Not only are the initial micro-lensing detections followed up in real time, but ongoing events are prioritised and continually monitored, with the returned data being analysed automatically. If the ``smart software'' running the observing campaign detects a planet-like anomaly, further follow-up will be scheduled autonomously and other telescopes and telescope networks alerted to the possible planetary detection. We further discuss the implications of this, and how such projects can be used to build more general autonomous observing and control systems.

Alasdair Allan; Tim Naylor; Eric S. Saunders

2008-02-04T23:59:59.000Z

347

GENI: Grid Hardware and Software  

SciTech Connect (OSTI)

GENI Project: The 15 projects in ARPA-Es GENI program, short for Green Electricity Network Integration, aim to modernize the way electricity is transmitted in the U.S. through advances in hardware and software for the electric grid. These advances will improve the efficiency and reliability of electricity transmission, increase the amount of renewable energy the grid can utilize, and provide energy suppliers and consumers with greater control over their power flows in order to better manage peak power demand and cost.

None

2012-01-09T23:59:59.000Z

348

Software and Tools on Carver  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software and Tools The table below shows the software installed on Carver that is managed by modules. Package Category Version Module Install Date Date Made Default ABINIT applications/ material sciences 6.0.3 abinit/6.0.3 2010-05-06 ABINIT applications/ material sciences 6.10.3 abinit/6.10.3 2012-01-10 ABINIT applications/ material sciences 6.10.3-gpu abinit/6.10.3-gpu 2012-01-26 ABINIT applications/ material sciences 6.12.1 abinit/6.12.1 2012-02-13 ABINIT applications/ material sciences 6.12.1-gpu abinit/6.12.1-gpu 2012-02-06 ABINIT applications/ material sciences 6.12.1-magma abinit/6.12.1-magma 2012-02-10 ABINIT applications/ material sciences 6.2.2 abinit/6.2.2 2010-08-16 ABINIT applications/ material sciences 6.4.1 abinit/6.4.1 2010-11-24 2012-01-12

349

Building Energy Software Tools Directory: OnGrid Tool  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

OnGrid Tool OnGrid Tool The OnGrid Tool is an Excel-based application assisting in PV system sizing, pricing and quoting. It enables solar installers to gather a customer’s utility and site information quickly and efficiently. It calculates optimum system size, electricity bill savings, system incentives, and system net costs. It then calculates various economic benefit factors and produces a variety of proposals, quotes, and. The OnGrid Tool includes rates, incentives, and tax calculations, and estimates system performance, including all performance factors and shading data. Screen Shots Keywords solar, financial, payback, analysis, sales, tool, software, economics, proposal Validation/Testing The software is run through Microsoft Excel and results are available immediately. OnGrid uses the most credible sources for industry updates.

350

Software Policy | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Intrepid/Challenger/Surveyor Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Pullback Policy ALCF Acknowledgment Policy Account Sponsorship & Retention Policy Accounts Policy Data Policy INCITE Quarterly Report Policy Job Scheduling Policy on BG/P Job Scheduling Policy on BG/Q Refund Policy Software Policy User Authentication Policy Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Software Policy ALCF Resource Software Use All software used on ALCF computers must be appropriately acquired and used according to the appropriate licensing. Possession or use of illegally copied software is prohibited. Likewise, users shall not copy copyrighted software, except as permitted by the owner of the copyright. Currently,

351

Software and Analytical Tools | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Information Resources » Software and Analytical Tools Information Resources » Software and Analytical Tools Software and Analytical Tools October 8, 2013 - 2:12pm Addthis Software and analytical tools are available to help Federal agencies implement energy- and water-efficiency projects. Building Energy Software Tools Directory: This U.S. Department of Energy's Building Technology Office website lists more than 400 software tools for evaluating energy efficiency in facilities. Building Life Cycle Cost (BLCC) Programs: The following National Institute of Standards and Technology programs help compute and analyze capital investments in buildings: BLCC5 Program: Analyze capital investments in buildings. Energy Escalation Rate Calculator: Compute an average annual escalation rate. Distributed Generation Energy Technology Capital Costs: This National

352

A Software Tool for Concurrent Consideration of Multiple Codes & Standards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Software Tool for Concurrent Consideration of Multiple Codes & Standards A Software Tool for Concurrent Consideration of Multiple Codes & Standards Speaker(s): Georg Reichard Date: August 29, 2002 - 12:00pm Location: Bldg. 90 Dr. Reichard will give a brief overview of the Research Areas at the Institute for Structural Analysis at the Graz University of Technology and then focus on a software development project, which aims at facilitating concurrent consideration of multiple codes and standards for European buildings. The software development project started in 1998 and was initially focused on integrating the consideration of standards on thermal, hydrothermal and acoustic performance of building components. Currently, the software is being expanded to include consideration of multiple international standards for building components as well as whole buildings

353

Requirements and Submission Process for Qualified Software  

Broader source: Energy.gov (indexed) [DOE]

Requirements and Submission Process for Qualified Software The U.S. Department of Energy (DOE) verifies and maintains the list of software that qualifies for the calculation of the energy and power cost savings for commercial building tax deductions under tax code Section 179D. The software requirements are listed under Internal Revenue Service (IRS) Code §179D (c)(1) and (d) Regulations, Notice 2006-52

354

PLC Support Software at Jefferson Lab  

SciTech Connect (OSTI)

Several Automation Direct (DirectNet) Programmable Logic Controllers (PLCs) have been integrated into the accelerator control system at Jefferson Lab. The integration is based on new software that consists of three main parts: a PLC driver with a state machine control block, a device support module, and a common serial driver. The components of new software and experience gained with the use of this software for beam dump systems at Jefferson Lab are presented.

P. Chevtsov; S. Higgins; S. Schaffner; D. Seidman

2002-10-01T23:59:59.000Z

355

Financial constraints in capacity planning: a national utility regulatory model (NUREG). Volume III of III: software description. Final report  

SciTech Connect (OSTI)

This volume is the software description for the National Utility Regulatory Model (NUREG). This is the third of three volumes provided by ICF under contract number DEAC-01-79EI-10579. These three volumes are: a manual describing the NUREG methodology; a users guide; and a description of the software. This manual describes the software which has been developed for NUREG. This includes a listing of the source modules. All computer code has been written in FORTRAN.

None

1981-10-29T23:59:59.000Z

356

Cleanroom Software Engineering: Theory and Practice  

Science Journals Connector (OSTI)

Cleanroom software engineering is a rigorous engineering discipline ... 1992; Linger, 1993, 1994). The Cleanroom name is borrowed from hardware cleanrooms, with ... on defect prevention rather than defect removal...

Richard C. Linger; Carmen J. Trammell

1999-01-01T23:59:59.000Z

357

Copyrighted Software | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

public from ESTSC, subject to the license agreement described below. Such software may also be available from the originating site according to its procedures. Last updated: June 1...

358

Software and Data | Department of Energy  

Energy Savers [EERE]

software programs that model geothermal systems and economics, as well as data related to geothermal technology and energy to assist with calculation and model construction....

359

Sandia National Laboratories: Wind Software Downloads  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

* SAND 2014-3685P * Wind software * wind tools Comments are closed. Renewable Energy Wind Energy Wind Plant Optimization Test Site Operations & Maintenance Safety: Test...

360

Institute for Software Technology SWP Prdikatausdrcke  

E-Print Network [OSTI]

? TAFEL!! ACHTUNG: Für alle ` I(`,(x)¬eq(plus(x,1),y) )=T ist FALSCH!! 8Institute for Software Technology

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Global Optimization: Software, Test Problems, and Applications  

E-Print Network [OSTI]

This is followed by a discussion of GO software, test problems and several important types of applications, with additional pointers. The exposition is...

Janos D. Pinter

362

FLOWTRAN-TF software design  

SciTech Connect (OSTI)

FLOWTRAN-TF was created to analyze an individual Mk22 fuel assembly during a large break Loss Of Coolant Accident (LOCA) scenario involving the Savannah River Site K-reactor after the initial few seconds of the transient. During the initial few seconds reactor cooling is limited by the static or Ledinegg flow instability phenomenon. The predecessor FLOWTRAN code was developed to analyze this portion of a LOCA. In the several seconds following the break, a significant fraction of the reactor coolant inventory leaks out the break, Emergency Cooling System (ECS) flow is initiated, and air enters the primary coolant circulation loops. Reactor fuel assemblies are cooled by a low flowrate air-water downflow. Existing commercial nuclear industry thermal-hydraulic codes were judged inadequate for detailed modeling of a Mk22 fuel assembly because the application involves a ribbed annular geometry, low pressure, downflow and an air-water mixture. FLOWTRAN-TF is a two-phase thermal-hydraulics code of similar technology to existing commercial codes such as RELAP and TRAC but customized for Savannah River Site applications. The main features and capabilities of FLOWTRAN-TF are detailed Mk22 fuel assembly ribbed annular geometry; conjugate heat transfer; detailed neutronic power distribution; three-dimensional heat conduction in Mk22 fuel and target tubes; two-dimensional coolant flow in channels (axial, azimuthal); single-phase and/or two-phase fluid (gas, liquid and/or gas-liquid); two-component (air, water); constitutive models applicable to low pressure air-water downflow in ribbed annular channels. The design of FLOWTRAN-TF is described in detail in this report which serves as the Software Design Report in accordance with Quality Assurance Procedure IV-4, Rev. 0 Software Design and Implementation'' in the 1Q34 manual.

Aleman, S.E.; Flach, G.P.; Hamm, L.L.; Lee, S.Y.; Smith, F.G. III.

1993-02-01T23:59:59.000Z

363

FLOWTRAN-TF software design  

SciTech Connect (OSTI)

FLOWTRAN-TF was created to analyze an individual Mk22 fuel assembly during a large break Loss Of Coolant Accident (LOCA) scenario involving the Savannah River Site K-reactor after the initial few seconds of the transient. During the initial few seconds reactor cooling is limited by the static or Ledinegg flow instability phenomenon. The predecessor FLOWTRAN code was developed to analyze this portion of a LOCA. In the several seconds following the break, a significant fraction of the reactor coolant inventory leaks out the break, Emergency Cooling System (ECS) flow is initiated, and air enters the primary coolant circulation loops. Reactor fuel assemblies are cooled by a low flowrate air-water downflow. Existing commercial nuclear industry thermal-hydraulic codes were judged inadequate for detailed modeling of a Mk22 fuel assembly because the application involves a ribbed annular geometry, low pressure, downflow and an air-water mixture. FLOWTRAN-TF is a two-phase thermal-hydraulics code of similar technology to existing commercial codes such as RELAP and TRAC but customized for Savannah River Site applications. The main features and capabilities of FLOWTRAN-TF are detailed Mk22 fuel assembly ribbed annular geometry; conjugate heat transfer; detailed neutronic power distribution; three-dimensional heat conduction in Mk22 fuel and target tubes; two-dimensional coolant flow in channels (axial, azimuthal); single-phase and/or two-phase fluid (gas, liquid and/or gas-liquid); two-component (air, water); constitutive models applicable to low pressure air-water downflow in ribbed annular channels. The design of FLOWTRAN-TF is described in detail in this report which serves as the Software Design Report in accordance with Quality Assurance Procedure IV-4, Rev. 0 ``Software Design and Implementation`` in the 1Q34 manual.

Aleman, S.E.; Flach, G.P.; Hamm, L.L.; Lee, S.Y.; Smith, F.G. III

1993-02-01T23:59:59.000Z

364

CSP 587: Software Quality Management S. Kan, Software Quality engineering, Addison-Wesley.  

E-Print Network [OSTI]

CSP 587: Software Quality Management Texts S. Kan, Software Quality engineering, Addison hours · Quality Appraisal Programs 5 hours SEI's Capability Maturity Model ISO 9000 Total 45 hours CSP

Heller, Barbara

365

Software Studies in action: Open Source and Free Software in Brazil  

E-Print Network [OSTI]

Open Source and Free Software in Brazil Cicero Inacio daSilva Software Studies Brazil Avenida Angelica, 1905 SoPaulo, SP 01227-200, Brazil Jane de Almeida Mackenzie

da Silva, Cicero Inacio; de Almeida, Jane

2009-01-01T23:59:59.000Z

366

Net Taxable Gasoline Gallons (Including Aviation Gasoline)  

E-Print Network [OSTI]

Net Taxable Gasoline Gallons (Including Aviation Gasoline) Period 2000 2001 (2) 2002 2003 2004 "gross" to "net" , was deemed impractical. (5) This report replaces the Gross Taxable Gasoline Gallons (Including Aviation Gasoline) report which will not be produced after December 2002. (6) The November 2007

367

Observability of Software Engineering Processes in Open Source Software Projects Domain  

E-Print Network [OSTI]

engineering processes to improve the quality of the systems as well. However, their diffusion in practice hasObservability of Software Engineering Processes in Open Source Software Projects Domain Wikan Danar the software engineering processes of OSS project. However, current approaches focus on limited areas of health

368

RE Theory Meets Software Practice: Lessons from the Software Development Trenches  

E-Print Network [OSTI]

projects, each focused on either security-critical or safety-critical software, this paper evaluates involving ei- ther security-critical or safety-critical software. In the first project, we provided evidence developed requirements specifications of safety-critical software modules of a NASA system [8]. In all four

369

Producing reliable and robust software has become one of the most important software development concerns in  

E-Print Network [OSTI]

development concerns in recent years. Testing is a process by which software quality can be assured through the collection of infor- mation. While testing can improve software reliability, current tools typically are inflexible and have high over- heads, making it challenging to test large software projects. In this paper

Childers, Bruce

370

Towards Extreme(ly) Usable Software: Exploring Tensions Between Usability and Agile Software Development  

E-Print Network [OSTI]

that draws from extreme programming (XP), a widely practiced agile software development process, and scenario that need to be addressed for agile software development methods and usability engineering practices to work with multidisciplinary system design--focusing specifically on agile software development and usability----by developing

McCrickard, Scott

371

Preparing scientific application software for exascale computing  

Science Journals Connector (OSTI)

Many of the most widely used scientifc application software of today were developed largely during a time when the typical amount of compute cores was calculated in tens or hundreds. Within a not too distant future the number of cores will be calculated ... Keywords: HemeLB, IFS, NEK5000, elmfire, exascale, gromacs, openFOAM, optimization, science application software

J. A. strm; A. Carter; J. Hetherington; K. Ioakimidis; E. Lindahl; G. Mozdzynski; R. W. Nash; P. Schlatter; A. Signell; J. Westerholm

2012-06-01T23:59:59.000Z

372

Consumer Alert Pirated Software May Contain Malware  

E-Print Network [OSTI]

. Today, the National Intellectual Property Rights Coordination (IPR) Center - of which the FBI is a key sellers of pirated software, submit a tip to the IPR Center or the Internet Crime Complaint Center. And know this: Pirated software is just one of the many threats that the IPR Center and the FBI

Bernstein, Phil

373

SOFTWARE RELATEDSOFTWARE-RELATED MEASUREMENT:MEASUREMENT  

E-Print Network [OSTI]

SOFTWARE RELATEDSOFTWARE-RELATED MEASUREMENT:MEASUREMENT: RISKS AND OPPORTUNITIES CEM KANER, J and lazy? Most managers who I know have tried at least oney g measurement program--and abandoned them: · Measurement theory and how it applies to software development metrics (which, at their core, are typically

374

Software performance antipatterns: modeling and analysis  

Science Journals Connector (OSTI)

The problem of capturing performance problems is critical in the software design, mostly because the results of performance analysis (i.e. mean values, variances, and probability distributions) are difficult to be interpreted for providing feedback to ... Keywords: antipatterns, design alternatives, feedback generation, performance evaluation, software architecture

Vittorio Cortellessa; Antinisca Di Marco; Catia Trubiani

2012-06-01T23:59:59.000Z

375

A Software Engineering Perspective for Services Security  

E-Print Network [OSTI]

A Software Engineering Perspective for Services Security Jun Han School of Information Technology. In fact, the development of services and the composition of service-based systems are software engineering. Services are usually developed and deployed independently; and systems can be formed by composing relevant

Han, Jun

376

Title Slide "Software quality and the  

E-Print Network [OSTI]

been doubling in size every 18 months. · Cars have gone from around 50,000 lines of assembler to around as `cosmetic' areas like memory seats and in-car entertainment, software is now widely deployed in critical vehicles because of a software defect. Stopping distances were extended by 15-20 metres. · Federal

Hatton, Les

377

verifying complex software systems the challenge  

E-Print Network [OSTI]

, commercial, space) top: manned bottom:robotic it also holds for control software in cars example the unintended acceleration study 7 february 8, 2011 the software life cycle reqs design coding testing defect propagation defect insertion 6 23 46 1 defect removal 4 20 26 24 residual defects per KLOC post-testing (a

van Dyk, David

378

Software reuse strategies and component markets  

Science Journals Connector (OSTI)

Black-box reuse with component markets could be the silver bullet solution that makes software reuse a reality, and advances software development to a robust industrial process---but only if market makers address the growing pains plaguing this immature ...

T. Ravichandran; Marcus A. Rothenberger

2003-08-01T23:59:59.000Z

379

Trends and patterns among online software pirates  

Science Journals Connector (OSTI)

Computer crime on the Internet poses a significant threat to the well-being of businesses and individuals, and none are immune from the repercussions that can result. One type of this unethical and unlawful activity is online software piracy. In this ... Keywords: Internet, academic, business, computer, copyright, ethics, intellectual property, piracy, software, students, university

Sameer Hinduja

2003-06-01T23:59:59.000Z

380

Software Testing and Maintenance 1 Regression Testing  

E-Print Network [OSTI]

1 Software Testing and Maintenance 1 Regression Testing Introduction Test Selection Test Minimization Test Prioritization Summary Software Testing and Maintenance 2 What is it? Regression testing refers to the portion of the test cycle in which a program is tested to ensure that changes do not affect

Lei, Jeff Yu

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Guide to Preventing Computer Software Piracy  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Guide to Preventing Computer Software Piracy It is the intent of the Department of Energy (DOE) to issue guidance in accordance with Federal CIO Council recommendations and in compliance with Executive Order 13103. The guidance in this document is based on the CIO Council's recommendations in reference to computer software piracy, and applies to all DOE elements. Canceled by DOE N 205.18

2001-07-12T23:59:59.000Z

382

Fault tolerant supercomputing: a software approach  

Science Journals Connector (OSTI)

Adding fault tolerance to embedded supercomputing applications is becoming an issue of great significance, especially as these applications support critical parts of our everyday life in the modern "Information Society". To this end, a software middleware ... Keywords: embedded parallel and distributed systems, fault-tolerant communication, high performance computing, maintainability, separation of design concerns, software fault tolerance, user-specified recovery strategies

E. Verentziotis; T. Varvarigou; D. Vergados; G. Deconinck

2001-01-01T23:59:59.000Z

383

Insulin Pump Software Certification Yihai Chen1,  

E-Print Network [OSTI]

Insulin Pump Software Certification Yihai Chen1, , Mark Lawford2, , Hao Wang2, , and Alan Wassyng2 for Software Certification McMaster University, Hamilton, Ontario, Canada Abstract. The insulin pump. Malfunction of the insulin pump will endanger the user's life. All countries impose some regula- tion

Lawford, Mark

384

Gas storage materials, including hydrogen storage materials  

DOE Patents [OSTI]

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

2014-11-25T23:59:59.000Z

385

BUILDING TECHNOLOGIES PROGRAM Tax Deduction Qualified Software  

Broader source: Energy.gov (indexed) [DOE]

Tax Deduction Qualified Software IES version 6.3 On this page you'll find information about the IES version 6.3 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 30 March 2011 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Integrated Environmental Solutions Limited Helix Building, West Of Scotland Science Park,

386

Extending air temperature setpoints: Simulated energy savings and design considerations for new and retrofit buildings  

E-Print Network [OSTI]

X. Comparison of Building Energy Modeling Programs: HVACSavings Modeling of Standard Commercial Building Retuningbuilding energy and simulations were carried out with EnergyPlus version 7.2, software well suited for modeling

Hoyt, Tyler; Arens, Edward; Zhang, Hui

2014-01-01T23:59:59.000Z

387

OpenStudio | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Started in 2008 with an EnergyPlus geometry creation plug-in for the 3D drawing tool SketchUp, OpenStudio has grown into a robust, full-featured software development kit (SDK)...

388

Oil and Gas Industry Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Install the English Version of Adobe Acrobat Reader Install the English Version of Adobe Acrobat Reader SIMULATORS BOAST 98 BOAST 98: (Version 4.2.4) FORTRAN 90 source code and executable program. Visual, dynamic, and interactive update of BOAST3. Rock region saturations corrected by WOC and GOC. Interacts with EdBOAST. Beta tested. User’s Guide and Documentation Manual. National Petroleum Technology Office by TRW Petroleum Technologies, December 1998. Compiled with Lahey FORTRAN 90 and ISS/Interacter. Min. Req. Windows95, Windows NT, or Windows 3.1 with Win32s installed. Recommend 32 MB memory. Anticipate need of 40 to 100 MB disk space. Software 607 KB Manual 216 KB Boast 98 manual Manual 63 KB Boast 3.0 manual and documentation EdBOAST EdBOAST: (Version 1.3.3) FORTRAN 90 source code and executable program. Dialog oriented reservoir data editor for input files directed to BOAST98 and BOAST3. Graphic plots and spreadsheet import / export features. Interacts with BOAST98. Beta tested. User’s Guide. National Petroleum Technology by TRW Petroleum Technologies, December 1998. Compiled with Lahey FORTRAN 90 AND ISS / Interacter . Min. Req. Windows98, Windows NT, or Windows3.1 with Win32s installed. Recommend 32 MB memory.

389

SAPHIRE 8 Software Project Plan  

SciTech Connect (OSTI)

This project is being conducted at the request of the DOE and the NRC. The INL has been requested by the NRC to improve and maintain the Systems Analysis Programs for Hands-on Integrated Reliability Evaluation (SAPHIRE) tool set concurrent with the changing needs of the user community as well as staying current with new technologies. Successful completion will be upon NRC approved release of all software and accompanying documentation in a timely fashion. This project will enhance the SAPHIRE tool set for the user community (NRC, Nuclear Power Plant operations, Probabilistic Risk Analysis (PRA) model developers) by providing improved Common Cause Failure (CCF), External Events, Level 2, and Significance Determination Process (SDP) analysis capabilities. The SAPHIRE development team at the Idaho National Laboratory is responsible for successful completion of this project. The project is under the supervision of Curtis L. Smith, PhD, Technical Lead for the SAPHIRE application. All current capabilities from SAPHIRE version 7 will be maintained in SAPHIRE 8. The following additional capabilities will be incorporated: Incorporation of SPAR models for the SDP interface. Improved quality assurance activities for PRA calculations of SAPHIRE Version 8. Continue the current activities for code maintenance, documentation, and user support for the code.

Curtis L.Smith; Ted S. Wood

2010-03-01T23:59:59.000Z

390

Building Energy Software Tools Directory: EnergyGauge Summit Premier  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EnergyGauge Summit Premier EnergyGauge Summit Premier EnergyGauge Summit Premier logo EnergyGauge Summit Premier offers automatic reference building generation allowing considerable time savings for analyzing buildings for code compliance and green building certification. After entering a building, the software can automatically compare the building to ASHRAE Standard 90.1 2001, 2004 or 2007 reference building models, and for the appropriate building types, the ASHRAE Advanced design guidelines. Additional capabilities include the ability to run a whole building simulation as per ASHRAE Standard 90.1 Appendix G guidelines for LEED New Construction 2.2, and for computing Federal Tax Deductions as per EPACT 2005 guidelines from the Internal Revenue Service (IRS) and DOE. The software also offers the

391

Building Energy Software Tools Directory: REM/Design  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

REM/Design REM/Design REM/Design logo. User-friendly, yet highly sophisticated, residential energy analysis and code compliance software which eliminates the uncertainty and guesswork from energy design and code compliance decisions. Developed specifically with the needs of homebuilders, remodelers, energy consultants and designers in mind, REM/Design calculates heating, cooling, hot water, lights and appliance loads, consumption and costs for single and multi-family designs in over 250 North American cities. This Windows-based software automatically analyzes the energy and economic performance of numerous energy design features including envelope insulation, air leakage control, duct leakage control, active and passive solar systems, heating and cooling equipment, mechanical ventilation and more. In addition to

392

Argonne TTRDC - Modeling, Simulation & Software - Autonomie Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Autonomie Research Expertise Autonomie Research Expertise Software Tool and Process Development For more than 10 years, Argonne's Vehicle Modeling Simulation and Control group has been focusing on developing software tools to facilitate the evaluation and development of advanced vehicle technologies with the development of PSAT and more recently Autonomie. Autonomie has been designed to be used as a single tool throughout the different phases of Model Based Design of the Vehicle Development Process (VDP). Model-Based Design is a math-based visual method for designing complex control systems and is being used successfully in many motion control, industrial, aerospace, and automotive applications. Autonomie's development has been focused on allowing users to customize the tool during each phase of the Model-Based Design, including component models, controls, and processes.

393

Intentionally Including - Engaging Minorities in Physics Careers |  

Broader source: Energy.gov (indexed) [DOE]

Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers April 24, 2013 - 4:37pm Addthis Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the American Institute of Physics Resources. Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the

394

Scramjet including integrated inlet and combustor  

SciTech Connect (OSTI)

This patent describes a scramjet engine. It comprises: a first surface including an aft facing step; a cowl including: a leading edge and a trailing edge; an upper surface and a lower surface extending between the leading edge and the trailing edge; the cowl upper surface being spaced from and generally parallel to the first surface to define an integrated inlet-combustor therebetween having an inlet for receiving and channeling into the inlet-combustor supersonic inlet airflow; means for injecting fuel into the inlet-combustor at the step for mixing with the supersonic inlet airflow for generating supersonic combustion gases; and further including a spaced pari of sidewalls extending between the first surface to the cowl upper surface and wherein the integrated inlet-combustor is generally rectangular and defined by the sidewall pair, the first surface and the cowl upper surface.

Kutschenreuter, P.H. Jr.; Blanton, J.C.

1992-02-04T23:59:59.000Z

395

Transmission line including support means with barriers  

DOE Patents [OSTI]

A gas insulated transmission line includes an elongated outer sheath, a plurality of inner conductors disposed within and extending along the outer sheath, and an insulating gas which electrically insulates the inner conductors from the outer sheath. A support insulator insulatably supports the inner conductors within the outer sheath, with the support insulator comprising a main body portion including a plurality of legs extending to the outer sheath, and barrier portions which extend between the legs. The barrier portions have openings therein adjacent the main body portion through which the inner conductors extend.

Cookson, Alan H. (Pittsburgh, PA)

1982-01-01T23:59:59.000Z

396

Studying Free Software with Free Software and Free methods A paper for the Australian Open Source Development Conference  

E-Print Network [OSTI]

Studying Free Software with Free Software and Free methods A paper for the Australian Open Source, 2004 Why research Free Libre and Open Source Software? Free, Libre and Open source software (FLOSS1 teams using social network analysis and describes my efforts to do it with free software and free

Howison, James

397

Energy Consumption of Personal Computing Including Portable  

E-Print Network [OSTI]

Energy Consumption of Personal Computing Including Portable Communication Devices Pavel Somavat1 consumption, questions are being asked about the energy contribution of computing equipment. Al- though studies have documented the share of energy consumption by this type of equipment over the years, research

Namboodiri, Vinod

398

EE Regional Technology Roadmap Includes comparison  

E-Print Network [OSTI]

EE Regional Technology Roadmap Includes comparison against 6th Power Plan (Update cyclically Roadmap with a strong linkage to utility programs Scan for Technologies 1. How does it address the NW Data Clearinghouse BPA/RTF NEEA/Regional Programs Group Update Regional EE Technology Roadmap Lighting

399

Video Topics Include Freshman Inquiry Course  

E-Print Network [OSTI]

Video Topics Include Freshman Inquiry Course Open Advisement/ Group Advisement Dinning Campus: End of Spring 2012, Commencement May 18: Grades available on MAX after 4:30pm AdvisementYouTubeVideoSeries I N S I D E T H I S I S S U E : YouTube Video Series 1 Mark Your Calendar 1 Exploring Major Tips 2

Hardy, Christopher R.

400

Including Ocean Model Uncertainties in Climate Predictions  

E-Print Network [OSTI]

Including Ocean Model Uncertainties in Climate Predictions Chris Brierley, Alan Thorpe, Mat Collins's to perform the integrations Currently uses a `slab' ocean #12;An Ocean Model Required to accurately model transient behaviour Will have its own uncertainties Requires even more computing power Create new models

Jones, Peter JS

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Development and Integration Issues about Software Engineering, Systems  

E-Print Network [OSTI]

met 8 of the 17 Level 3 Goals Peer Review Software Product Engineering ISO 9001 since 1993 NATO Secret Implementation of Action Plan (Process Def.) Winter 94 Pilot Projects 1995 SoftwareSoftware Process

Laporte, Claude Y.

402

Providing Configuration Management Support in Software Engineering Environments  

E-Print Network [OSTI]

Providing Configuration Management Support in Software Engineering Environments Jun Han Peninsula development project. A software engineering environment should not only pro- vide support for software engineering environments and demonstrate how configuration management can be achieved in such en- vironments

Han, Jun

403

Modeling software artifact count attribute with s-curves  

E-Print Network [OSTI]

The estimation of software project attributes, such as size, is important for software project resource planning and process control. However, research regarding software attribute modeling, such as size, effort, and cost, are high-level and static...

Ma, Norman K.

2009-05-15T23:59:59.000Z

404

Modeling software artifact count attribute with s-curves  

E-Print Network [OSTI]

The estimation of software project attributes, such as size, is important for software project resource planning and process control. However, research regarding software attribute modeling, such as size, effort, and cost, are high-level and static...

Ma, Norman K

2008-10-10T23:59:59.000Z

405

Software Engineering Reviews and Audits, 1st edition  

Science Journals Connector (OSTI)

Accurate software engineering reviews and audits have become essential to the success of software companies and military and aerospace programs. These reviews and audits define the framework and specific requirements for verifying software development ...

Boyd L. Summers

2011-01-01T23:59:59.000Z

406

Building Energy Software Tools Directory: Visual  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Visual Visual Visual logo. Comprehensive lighting analysis software engineered for demanding interior and exterior applications. Visual lighting design software integrates an advanced 3-D modeling environment with an intuitive interface�providing a unique and powerful extension of the design process. Professional presentation capabilities enable you to quickly develop, analyze, and modify advanced lighting designs. Visual performs direct and interreflected component calculations and provides the ability to quickly compose professional presentations. Screen Shots Keywords lighting, lighting design, roadway lighting, visual, lumen method Validation/Testing The algorithms used by Visual lighting design software to calculate illuminance levels in diffuse architectural models follow commonly accepted

407

Collaboration Topics - System Software | National Nuclear Security  

National Nuclear Security Administration (NNSA)

System Software | National Nuclear Security System Software | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Collaboration Topics - System Software Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing and

408

PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid N  

SciTech Connect (OSTI)

This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''N''. The Appendices contains copies of the printouts of these software programs. This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''N''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines have been tailored for U-farm skids. The skid ''N'' program for U-109 is similar to the skid ''M'' program for U-102. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for U-109 pumping. This document represents the final PLC and DTAM programs for PIC skid ''N'' at U-109. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document.

KOCH, M.R.

2000-03-27T23:59:59.000Z

409

Buildings Included on EMS Reports"  

Broader source: Energy.gov (indexed) [DOE]

Office of Legacy Management Office of Legacy Management Buildings Included on EMS Reports" "Site","Property Name","Property ID","GSF","Incl. in Water Baseline (CY2007)","Water Baseline (sq. ft.)","Water CY2008 (sq. ft.)","Water CY2009 (sq. ft.)","Water Notes","Incl. in Energy Baseline (CY2003)","Energy Baseline (sq. ft.)","CY2008 Energy (sq. ft.)","CY2009 Energy (sq. ft.)","Energy Notes","Included as Existing Building","CY2008 Existing Building (sq. ft.)","Reason for Building Exclusion" "Column Totals",,"Totals",115139,,10579,10579,22512,,,3183365,26374,115374,,,99476 "Durango, CO, Disposal/Processing Site","STORAGE SHED","DUD-BLDG-STORSHED",100,"no",,,,,"no",,,,"OSF","no",,"Less than 5,000 GSF"

410

Power generation method including membrane separation  

DOE Patents [OSTI]

A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

Lokhandwala, Kaaeid A. (Union City, CA)

2000-01-01T23:59:59.000Z

411

Completion strategy includes clay and precipitate control  

SciTech Connect (OSTI)

This article describes the conditions which are necessary for a successful oil well completion in the Mississippi and Cherokee zones of South Central Kansas. Topics considered include paraffin precipitation, clay swelling and migration, and iron precipitation. Clays in these zones are sensitive to water-base treating fluids and tend to swell and migrate to the well bore, thereby causing permeability damage. The presence of iron in the Mississippi and Cherokee formations has been indicated by cuttings, core samples, and connate water samples.

Sandy, T.; Gardner, G.R.

1985-05-06T23:59:59.000Z

412

Jet-calculus approach including coherence effects  

Science Journals Connector (OSTI)

We show how integrodifferential equations typical of jet calculus can be combined with an averaging procedure to obtain jet-calculus-based results including the Mueller interference graphs. Results in longitudinal-momentum fraction x for physical quantities are higher at intermediate x and lower at large x than with the conventional incoherent jet calculus. These results resemble those of Marchesini and Webber, who used a Monte Carlo approach based on the same dynamics.

L. M. Jones; R. Migneron; K. S. S. Narayanan

1987-01-01T23:59:59.000Z

413

A framework for simulation-based real-time whole building performance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A framework for simulation-based real-time whole building performance A framework for simulation-based real-time whole building performance assessment Title A framework for simulation-based real-time whole building performance assessment Publication Type Journal Article Refereed Designation Unknown LBNL Report Number 0360-1323 Year of Publication 2012 Authors Pang, Xiufeng, Michael Wetter, Prajesh Bhattacharya, and Philip Haves Journal Building and Environment Volume 54 Start Page 100 Pagination 100-108 Date Published 08/2012 ISSN 0360-1323 Keywords building controls virtual test bed, building performance, energy modeling, energyplus, real-time building simulation Abstract Most commercial buildings do not perform as well in practice as intended by the design and their performances often deteriorate over time. Reasons include faulty construction, malfunctioning equipment, incorrectly configured control systems and inappropriate operating procedures. One approach to addressing this problems is to compare the predictions of an energy simulation model of the building to the measured performance and analyze significant differences to infer the presence and location of faults. This paper presents a framework that allows a comparison of building actual performance and expected performance in real time. The realization of the framework utilized the EnergyPlus, the Building Controls Virtual Test Bed (BCVTB) and the Energy Management and Control System (EMCS) was developed. An EnergyPlus model that represents expected performance of a building runs in real time and reports the predicted building performance at each time step. The BCVTB is used as the software platform to acquire relevant inputs from the EMCS through a BACnet interface and send them to the EnergyPlus and to a database for archiving. A proof-of-concept demonstration is also presented.

414

Heat Pump Water Heater Modeling in EnergyPlus (Presentation)  

SciTech Connect (OSTI)

This presentation summarizes NREL's development of a HPWH model for use in hourly building energy simulation programs, such as BEopt; this presentation was given at the Building America Stakeholder meeting on March 1, 2012, in Austin, Texas.

Wilson, E.; Christensen, C.

2012-03-01T23:59:59.000Z

415

CBE EnergyPlus Modeling Methods for UFAD Systems  

E-Print Network [OSTI]

when connected to a fan coil unit (as Titus and other linearof the diffuser as supplied by a fan coil unit for Titusdiffusers and fan coil unit for the Walnut based systems.

Webster, Tom; Bauman, Fred; Lee, Kwang Ho; Schiavon, Stefano; Daly, Alan; Hoyt, Tyler

2012-01-01T23:59:59.000Z

416

CBE EnergyPlus modeling methods for UFAD systems  

E-Print Network [OSTI]

when connected to a fan coil unit (as Titus and other linearof the diffuser as supplied by a fan coil unit for Titusdiffusers and fan coil unit for the Walnut based systems.

Webster, T.; Bauman, F.; Lee, K.; Schiavon, S.; Daly, A.; Hoyt, T.

2013-01-01T23:59:59.000Z

417

Using EnergyPlus for California Title-24 compliance calculations  

E-Print Network [OSTI]

Heat Gain Coefficient (SHGC), as are the window requirementsthe specified U- factor and SHGC. 3 To match the U-factor ofas necessary. To match the SHGC, the solar transmittance at

Huang, Joe; Bourassa, Norman; Buhl, Fred; Erdem, Ender; Hitchcock, Rob

2006-01-01T23:59:59.000Z

418

CBE EnergyPlus Modeling Methods for UFAD Systems  

E-Print Network [OSTI]

we assume a variable frequency drive with a high efficiencyCombined Variable frequency drive (VFD) efficiencies are a

Webster, Tom; Bauman, Fred; Lee, Kwang Ho; Schiavon, Stefano; Daly, Alan; Hoyt, Tyler

2012-01-01T23:59:59.000Z

419

Simulating a Nationally Representative Housing Sample Using EnergyPlus  

E-Print Network [OSTI]

s HVAC system ductwork by relating the static pressure toand static pressure. In order to model more efficient HVAC

Hopkins, Asa S.

2011-01-01T23:59:59.000Z

420

MODELING AND SIMULATION OF HVAC FAULTS IN ENERGYPLUS  

E-Print Network [OSTI]

coefficient as well as increased pressure drop across coil Unintended heating depending on which position the valve

Basarkar, Mangesh

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Simulating a Nationally Representative Housing Sample Using EnergyPlus  

E-Print Network [OSTI]

efficiencies). Electric resistance heaters were modeled asto an AFUE of 92. (Electric resistance furnaces maintainof the supplemental electric resistance heating element. We

Hopkins, Asa S.

2011-01-01T23:59:59.000Z

422

Dependency models as a basis for analyzing software product platform modularity : a case study in strategic software design rationalization  

E-Print Network [OSTI]

It is broadly accepted among software managers and architects that maintaining the integrity of software designs is important for the long-term health and viability of software product platforms. The use of modular, ...

LaMantia, Matthew J. (Matthew John)

2006-01-01T23:59:59.000Z

423

CSCL@Work Chapter Regional Learning in Software Industries CSCL@Networking -Regional Learning in Software Industries  

E-Print Network [OSTI]

learning across organizational boundaries. Keywords Regional Learning, Software Industry, Networks learning across organizational boundaries. Keywords Regional Learning, Software Industry, Networks1 CSCL@Work ­ Chapter Regional Learning in Software Industries CSCL@Networking - Regional Learning

424

Building Energy Software Tools Directory: Tools by Country - Canada  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Canada Canada A C D E F H I M P R S V Tool Applications Free Recently Updated Athena Model life cycle assessment, environment, building materials, buildings Free software. CATALOGUE windows, fenestration, product information, thermal characteristics Free software. DAYSIM annual daylight simulations, electric lighting energy use, lighting controls Free software. Software has been updated. EE4 CBIP whole building performance, building incentives Free software. Software has been updated. EE4 CODE standards and code compliance, whole building energy performance Free software. Software has been updated. Energy Profile Tool benchmarking, energy efficiency screening, end-use energy analysis, building performance analysis, utility programs ENERPASS

425

Integrated Mathematical Modeling Software Series of Vehicle Propulsion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Mathematical Modeling Software Series of Vehicle Propulsion System: (1) Tractive Effort (T sub ew) of Vehicle Road WheelTrack Sprocket Integrated Mathematical Modeling Software...

426

SPEC-DOC: A USER'S GUIDE TO SPECTROMETER SOFTWARE  

E-Print Network [OSTI]

SPECTROMETER SOFTWARE S. Sinton, J.R. Garbow, J.L. Ackerman,to Spectrometer Software" S. Sinton, J. R. Garbow, J. L.

Sinton, S.

2008-01-01T23:59:59.000Z

427

Software Adaptation Patterns for Service-Oriented Architectures .  

E-Print Network [OSTI]

??This thesis describes the concept of software adaptation patterns and how they can be used in software adaptation of service-oriented architectures. The patterns are described (more)

Hashimoto, Koji

2010-01-01T23:59:59.000Z

428

EPA Tier2 Submit Software Webpage | Open Energy Information  

Open Energy Info (EERE)

Software Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: EPA Tier2 Submit Software Webpage Author United States Environmental Protection...

429

EPA-GHG Inventory Targeted Data Collection Strategies and Software...  

Open Energy Info (EERE)

EPA-GHG Inventory Targeted Data Collection Strategies and Software Tools (Redirected from US EPA GHG Inventory Targeted Data Collection Strategies and Software Tools) Jump to:...

430

Software Quality Assurance Plan Example | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Assurance Plan Example Software Quality Assurance Plan Example An example of a software quality assurance plan developed from an actual DOE project SQA plan based on DOE G...

431

Facility Software Quality Assurance (SQA) for Captal Project...  

Office of Environmental Management (EM)

Facility Software Quality Assurance (SQA) for Captal Project Critical Decisions RM Facility Software Quality Assurance (SQA) for Captal Project Critical Decisions RM The purpose of...

432

Unique Hardware and Software Data Acquisition and Processing...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Hardware and Software Data Acquisition and Processing Solutions in a Small Engine Test Cell for Enhanced Kinetic Engine Modeling Accuracy Unique Hardware and Software Data...

433

Nuclear Energy Advanced Modeling and Simulation (NEAMS) Software...  

Broader source: Energy.gov (indexed) [DOE]

Software Verification and Validation (V&V) Plan Requirements Nuclear Energy Advanced Modeling and Simulation (NEAMS) Software Verification and Validation (V&V) Plan Requirements...

434

Building dependability arguments for software intensive systems  

E-Print Network [OSTI]

A method is introduced for structuring and guiding the development of end-to-end dependability arguments. The goal is to establish high-level requirements of complex software-intensive systems, especially properties that ...

Seater, Robert Morrison

2009-01-01T23:59:59.000Z

435

DISTRIBUTED SERVICE-ORIENTED SOFTWARE DEVELOPMENT  

E-Print Network [OSTI]

............................................................................9 1.3 Service-Oriented Architecture and ComputingDISTRIBUTED SERVICE-ORIENTED SOFTWARE DEVELOPMENT FFIIRRSSTT EEDDIITTIIOONN SSEECCOONNDD ..................................................................................................................................ix Chapter 1 Introduction to Distributed Service-Oriented Computing

Chen, Yinong

436

Honeywell modular automation system computer software documentation  

SciTech Connect (OSTI)

This document provides a Computer Software Docuemntation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-21I.

Cunningham, L.T.

1997-01-20T23:59:59.000Z

437

Harmonizing Systems and Software Cost Estimation  

E-Print Network [OSTI]

The objective of this paper is to examine the gaps and overlaps between software and systems engineering cost models with intent to harmonize the estimates in engineering engineering estimation. In particular, we evaluate ...

Wang, Gan

2009-07-19T23:59:59.000Z

438

Comparison of computed tomography dose reporting software  

Science Journals Connector (OSTI)

......and physics of radiation exposure(21...between the different software packages, and...awareness about adult radiation protection. Radiology...improvement program in CT safety for children...lightly: promoting radiation safety in pediatric interventional......

A. Abdullah; Z. Sun; N. Pongnapang; K.-H. Ng

2012-08-01T23:59:59.000Z

439

FAQS Reference Guide Safety Software Quality Assurance  

Broader source: Energy.gov [DOE]

This reference guide has been developed to address the competency statements in the (March 2011) edition of DOE-STD-1172-2011, Safety Software Quality Assurance Functional Area Qualification Standard.

440

Daylighting Prediction Software: Comparative Analysis and Application  

E-Print Network [OSTI]

for the calibrated modeling of light scattered in enclosed spaces. These software packages used algorithms based on either total radiosity (flux transfer) computations or physically accurate ray tracing. A summary of this survey along with the selection criteria used...

Estes, J. M. Jr.; Schreppler, S.; Newsom, T.

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Integrated Computer Software for Process Design Methodology  

E-Print Network [OSTI]

INTEGRATED COMPUTER SOFTWARE FOR PROCESS DESIGN METHODOLOGY Rajeev Gautam Union Carbide Corporation South Charleston, West Virginia A computer-aided system for synthesis, simulation and optimization of heat exchanger networks will be described...

Gautam, R.

442

Surreptitious Software: Models from Biology and History  

Science Journals Connector (OSTI)

Over the last decade a bewildering array of techniques have been proposed to protect software from piracy, malicious reverse engineering, and tampering. While we can broadly classify these techniques as obfuscati...

Christian Collberg; Jasvir Nagra; Fei-Yue Wang

2007-01-01T23:59:59.000Z

443

Requirements and Submission Process for Qualified Software  

Broader source: Energy.gov [DOE]

This document provides a complete list of requirements and submission details to have software qualified for calculating energy and power cost savings for commercial building tax deductions under tax code Section 179D.

444

Safety Software Quality Assurance- Central Registry  

Broader source: Energy.gov [DOE]

A significant improvement in the quality assurance of safety software used at the Department of Energy (DOE) nuclear facilities was achieved with the establishment of a list of "toolbox" codes that...

445

The Sage Project: Unifying Free Mathematical Software to Create a Viable Alternative to Magma, Maple, Mathematica and MATLAB  

Science Journals Connector (OSTI)

Sage is a free, open source, self-contained distribution of mathematical software, including a large library that provides a unified interface to the components of this distribution. This library also builds o...

Burin Ercal; William Stein

2010-01-01T23:59:59.000Z

446

SoftwareSystems 11/29  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Systems in Clean Coal Systems in Clean Coal Demonstration Projects TOPICAL REPORT NUMBER 17 December 2001 TOPICAL REPORT NUMBER 17 A report on three projects conducted under separate cooperative agreements between: The U.S. Department of Energy and * CQ Inc. * Southern Company Services * New York State Electric & Gas Corporation December 2001 Software Systems in Clean Coal Demonstration Projects Software Systems in Clean Coal Demonstration Projects Executive Summary ........................................................................................ 1 Background ..................................................................................................... 2 Process Optimization ...................................................................................... 2 Coal Quality Expert(tm)

447

Ensuring system security through formal software evaluation  

SciTech Connect (OSTI)

With the increasing use of computer systems and networks to process safeguards information in nuclear facilities, the issue of system and data integrity is receiving worldwide attention. Among the many considerations are validation that the software performs as intended and that the information is adequately protected. Such validations are often requested of the Safeguards Systems Group of the Los Alamos National Laboratory. This paper describes our methodology for performing these software evaluations.

Howell, J A; Fuyat, C [Los Alamos National Lab., NM (United States)] [Los Alamos National Lab., NM (United States); Elvy, M [Marble Associates, Boston, MA (United States)] [Marble Associates, Boston, MA (United States)

1992-01-01T23:59:59.000Z

448

NREL: TroughNet - Parabolic Trough Technology Models and Software Tools  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Models and Software Tools Technology Models and Software Tools Here you'll find information about models and software tools used to analyze parabolic trough power plant technology. They include: Annual Simulation Solar Advisor Model TRNSYS Other Analysis SolTRACE Receiver Model DView JEDI Annual Simulation Software Because solar power plants rely on an intermittent fuel supply-the sun-it is necessary to model the plant's performance on an hourly (or finer resolution) basis to understand and predict its annual performance. A number of performance and economics models are available for evaluating parabolic trough solar technologies. Industry also has developed a number of proprietary models for evaluating parabolic trough plants. Solar Advisor Model NREL, partnering with the U.S. Department of Energy's Solar Energy

449

Vector network analyzer check standards measurements and database software  

SciTech Connect (OSTI)

Vector network analyzers provide a convenient way to measure scattering parameters of a variety of microwave devices. However, these instruments, unlike oscilloscopes, require a high degree of user knowledge and expertise. Measurement calibration or error correction must be done prior to use. There are many ways to make poor measurement or measurement. Check standards have been used to verify that the network analyzer is operating properly. A computer program was developed to automatically measure a check standard and compare the new measurements with an historical database of measurements of the check standard device. The program can acquire new measurement data from selected check standards, plot the new data against the mean and standard deviation of prior data for the check standard, and update the database files for the check standard. This paper describes the function of the software including a discussion of its capabilities. The way in which the software is used in our lab is also described. Finally, examples are given of how the software can detect potential measurement problems.

Duda, L.E.

1996-05-01T23:59:59.000Z

450

The Architecture of MEG Simulation and Analysis Software  

E-Print Network [OSTI]

MEG (Mu to Electron Gamma) is an experiment dedicated to search for the $\\mu^+ \\rightarrow e^+\\gamma$ decay that is strongly suppressed in the Standard Model but predicted in several Super Symmetric extensions of it at an accessible rate. MEG is a small-size experiment ($\\approx 50-60$ physicists at any time) with a life span of about 10 years. The limited human resource available, in particular in the core offline group, emphasized the importance of reusing software and exploiting existing expertise. Great care has been devoted to provide a simple system that hides implementation details to the average programmer. That allowed many members of the collaboration to contribute to the development of the software of the experiment with limited programming skill. The offline software is based on two frameworks: {\\bf REM} in FORTRAN 77 used for the event generation and detector simulation package {\\bf GEM}, based on GEANT 3, and {\\bf ROME} in C++ used in the readout simulation {\\bf Bartender} and in the reconstruction and analysis program {\\bf Analyzer}. Event display in the simulation is based on GEANT 3 graphic libraries and in the reconstruction on ROOT graphic libraries. Data are stored in different formats in various stage of the processing. The frameworks include utilities for input/output, database handling and format conversion transparent to the user.

Paolo W. Cattaneo; Fabrizio Cei; Ryu Sawada; Matthias Schneebeli; Shuei Yamada

2011-06-20T23:59:59.000Z

451

STI Software Appropriate for Announcement | Scientific and Technical  

Office of Scientific and Technical Information (OSTI)

Software Appropriate for Announcement Software Appropriate for Announcement Print page Print page Email page Email page Organizations and individuals who have developed and/or modified software during work supported by DOE or during work carried out for others at DOE facilities are required to announce the software with the appropriate announcement record to ESTSC, if the software meets the following criteria: the software meets the definition of STI; the software is known or expected to be useful inside or outside the DOE community, or is not specific to the originating site; and a stable, useable, documented version of the software exists (i.e., the software is not under initial development); the software has undergone all appropriate reviews for sensitivity and export control. Refer to the Software Best Practices document for more information on the

452

Job Description -Software Engineer/Systems Administrator www.openclovis.com is a profitable software company specializing in providing off-the-shelf  

E-Print Network [OSTI]

of target platforms, including 32 and 64-bit x86, PowerPC, MIPS, ARM and SPARC. - Managing the server with software development in C/C++ under Linux - GNU make and Makefiles - Strong shell and associated scripting/TurboGears or similar (Gears, Rails) - Open-source development infrastructure (gForge - used to power Source

Ravikumar, B.

453

Optical panel system including stackable waveguides  

DOE Patents [OSTI]

An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

DeSanto, Leonard (Dunkirk, MD); Veligdan, James T. (Manorville, NY)

2007-11-20T23:59:59.000Z

454

Thermovoltaic semiconductor device including a plasma filter  

DOE Patents [OSTI]

A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

Baldasaro, Paul F. (Clifton Park, NY)

1999-01-01T23:59:59.000Z

455

Critical point anomalies include expansion shock waves  

SciTech Connect (OSTI)

From first-principle fluid dynamics, complemented by a rigorous state equation accounting for critical anomalies, we discovered that expansion shock waves may occur in the vicinity of the liquid-vapor critical point in the two-phase region. Due to universality of near-critical thermodynamics, the result is valid for any common pure fluid in which molecular interactions are only short-range, namely, for so-called 3-dimensional Ising-like systems, and under the assumption of thermodynamic equilibrium. In addition to rarefaction shock waves, diverse non-classical effects are admissible, including composite compressive shock-fan-shock waves, due to the change of sign of the fundamental derivative of gasdynamics.

Nannan, N. R., E-mail: ryan.nannan@uvs.edu [Mechanical Engineering Discipline, Anton de Kom University of Suriname, Leysweg 86, PO Box 9212, Paramaribo, Suriname and Process and Energy Department, Delft University of Technology, Leeghwaterstraat 44, 2628 CA Delft (Netherlands); Guardone, A., E-mail: alberto.guardone@polimi.it [Department of Aerospace Science and Technology, Politecnico di Milano, Via La Masa 34, 20156 Milano (Italy); Colonna, P., E-mail: p.colonna@tudelft.nl [Propulsion and Power, Delft University of Technology, Kluyverweg 1, 2629 HS Delft (Netherlands)

2014-02-15T23:59:59.000Z

456

Complex shell model representation including antibound states  

Science Journals Connector (OSTI)

A generalization of the complex shell model formalism is presented that includes antibound states in the basis. These states, together with bound states, Gamow states, and the continuum background, represented by properly chosen scattering waves, form a representation in which all states are treated on the same footing. Two-particle states are evaluated within this formalism, and observable two-particle resonances are defined. The formalism is illustrated in the well-known case of Li11 in its bound ground state and in Ca70(g.s.), which is also bound. Both cases are found to have a halo structure. These halo structures are described within the generalized complex shell model. We investigated the formation of two-particle resonances in these nuclei, but no evidence of such resonances was found.

R. Id Betan; R. J. Liotta; N. Sandulescu; T. Vertse; R. Wyss

2005-11-30T23:59:59.000Z

457

Commercial Reference Building: Small Hotel | OpenEI  

Open Energy Info (EERE)

60 60 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142278160 Varnish cache server Commercial Reference Building: Small Hotel Dataset Summary Description Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. Included here is data pertaining to the reference building type Small Hotel for each of the 16 climate zones, and each of three construction categories: new construction, post-1980 construction existing buildings, pre-1980 construction existing buildings.The dataset includes four key components: building summary, zone summary, location summary and a picture. Building summary includes details about: form, fabric, and HVAC. Zone summary includes details such as: area, volume, lighting, and occupants for all types of zones in the building. Location summary includes key building information as it pertains to each climate zone, including: fabric and HVAC details, utility costs, energy end use, and peak energy demand.In total, DOE developed 16 reference building types that represent approximately 70% of commercial buildings in the U.S.; for each type, building models are available for each of the three construction categories. The commercial reference buildings (formerly known as commercial building benchmark models) were developed by the U.S. Department of Energy (DOE), in conjunction with three of its national laboratories.Additional data is available directly from DOE's Energy Efficiency & Renewable Energy (EERE) Website, including EnergyPlus software input files (.idf) and results of the EnergyPlus simulations (.html).

458

Building Energy Software Tools Directory: CtrlSpecBuilder  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CtrlSpecBuilder CtrlSpecBuilder CtrlSpecBuilder logo. Free, on-line tool to help engineers write bid specifications for HVAC Control projects. CtrlSpecBuilder (Control Specification Builder) prepares open (non-proprietary and not sole-source) specifications based upon ASHRAE Guideline 13-2000, Specifying Direct Digital Control Systems. User options make it simple to include new technologies such as BACnet and Web-based controls in the specifications, and to specify energy saving options such as demand limiting, optimal start, and setpoint optimization. The completed specification includes overall project, hardware, and software requirements as well as a sequence of operations and a points list for every unique type of equipment included in the project. The specification is prepared in word processor format and can be downloaded to

459

What Should Adaptivity Mean to Interactive Software Programmers?  

E-Print Network [OSTI]

and adaptation are combined in a simple and innovative manner. Author Keywords Adaptive software, plasticity.2.11.Software engineering: Software Architectures INTRODUCTION Software adaptivity is a long time- stood as the self-modification of a system under context vari- ations, arose as a significant issue

Paris-Sud XI, Université de

460

Free/Open Source Software Development as an Approach to  

E-Print Network [OSTI]

across projects FOSS as multi-project software ecosystems FOSS as social movement Discussion for Software Research, UCI 5 What is free/open source software development? Free (as in "freedom" or liberty for Software Research, UCI 9 FOSSD Project Characteristics Operational code early and often--actively improved

Scacchi, Walt

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

March 17, 2004 1 Open Source Release of NASA Software  

E-Print Network [OSTI]

Release of NASA Software ­ NPR 2210.1, External Release of NASA Software · Purpose of Policy ­ To protect NASA and American public's investment in software and to maintain and enhance U.S. industry's competitiveness in the U.S. & international marketplace #12;March 17, 2004 7 Software Release Policy · Policy

462

Dynamic software update for component-based distributed systems  

Science Journals Connector (OSTI)

Dynamic evolution is a key aspect of the design, development, and maintenance of complex and distributed software systems built by integrating components. Evolution, tradi- tionally obtained by producing software upgrades, may de- rive from changes in ... Keywords: component-based distributed system, dynamic reconfiguration, dynamic software update, software evolution

Valerio Panzica La Manna

2011-06-01T23:59:59.000Z

463

Edinburgh Research Explorer Minimal information for reusable scientific software  

E-Print Network [OSTI]

-user, and any restrictions placed on the software. In software engineering terms [2], the quality of the software engineer and the researcher. It proposes a multi-level framework for improving the reusability amount of investment of effort and money is put into scientific software. In the UK, the Engineering

Millar, Andrew J.

464

Reducing Diff Overhead in Software DSM Systems using  

E-Print Network [OSTI]

Reducing Diff Overhead in Software DSM Systems using RDMA Operations in InfiniBand Ranjit Noronha;Introduction and Motivation Software DSM Modern computer networks Design and Implementation Diff creation and Future Work Outline #12;Software DSM Software DSM (SDSM) HLRC/VIA (Rutgers), TreadMarks (Rice) Depends

Panda, Dhabaleswar K.

465

Survey Reproduction of Defect Reporting in Industrial Software Development  

Science Journals Connector (OSTI)

Context: Defect reporting is an important part of software development in-vivo, but previous work from open source context suggests that defect reports often have insufficient information for defect fixing. Objective: Our goal was to reproduce and partially ... Keywords: software debugging, software maintenance, software quality

Eero I. Laukkanen; Mika V. Mantyla

2011-09-01T23:59:59.000Z

466

Using Agile Practices in Global Software Development: A Systematic Review  

E-Print Network [OSTI]

Using Agile Practices in Global Software Development: A Systematic Review Emam Hossain1 Muhammad There is a growing interest in applying agile approaches in Global Software Development (GSD) projects. Recently;1 Introduction The trend in the recent software development industry is to move towards Global Software

New South Wales, University of

467

Design and Evaluation of an FPGA Architecture for Software Protection  

E-Print Network [OSTI]

attacks on software systems have become a rapidly growing burden. The growing area of software protection protection using hardware/software codesign techniques. In Proc. of Design, Automation, and Test in EuropeDesign and Evaluation of an FPGA Architecture for Software Protection Joseph Zambreno Department

Zambreno, Joseph A.

468

LSB replacement steganography software detection based on model checking  

Science Journals Connector (OSTI)

Steganography software detection is one of effective approaches for steganography forensics using software analysis. In this paper a method of LSB replacement steganography software detection is proposed. Firstly three typical implementations of LSB ... Keywords: LSB replacement algorithm, automaton, model checking, steganography software

Zheng Zhao; Fenlin Liu; Xiangyang Luo; Xin Xie; Lu Yu

2012-10-01T23:59:59.000Z

469

SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE  

SciTech Connect (OSTI)

The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to stochastic hydrologic properties and flow processes.

C. Tsang

2004-09-22T23:59:59.000Z

470

On the Responsibilities of Software Architects and Software Engineers in an Agile Environment: Who Should  

E-Print Network [OSTI]

On the Responsibilities of Software Architects and Software Engineers in an Agile Environment: Who engineers with regards to each other's responsibilities and task ownership. The research involved over 50 to decide what to do in an agile environment, there is a need to be explicit about social aspects

van Vliet, Hans

471

Software Engineering: A Practitioner's Approach,Software Engineering: A Practitioner's Approach, Chapter 4Chapter 4  

E-Print Network [OSTI]

reproduction or use is expressly prohibited. The Manifesto forThe Manifesto for Agile Software DevelopmentAgile/e6/e Chapter 4Chapter 4 Agile DevelopmentAgile Development copyright © 1996, 2001, 2005 R Software Development "We are uncovering better ways of developing"We are uncovering better ways

Cukic, Bojan

472

Free and Open Source Software for Development  

E-Print Network [OSTI]

Development organizations and International Non-Governmental Organizations have been emphasizing the high potential of Free and Open Source Software for the Less Developed Countries. Cost reduction, less vendor dependency and increased potential for local capacity development have been their main arguments. In spite of its advantages, Free and Open Source Software is not widely adopted at the African continent. In this book the authors will explore the grounds on with these expectations are based. Where do they come from and is there evidence to support these expectations? Over the past years several projects have been initiated and some good results have been achieved, but at the same time many challenges were encountered. What lessons can be drawn from these experiences and do these experiences contain enough evidence to support the high expectations? Several projects and their achievements will be considered. In the final part of the book the future of Free and Open Source Software for Development will be explored. Special attention is given to the African continent since here challenges are highest. What is the role of Free and open Source Software for Development and how do we need to position and explore the potential? What are the threats? The book aims at professionals that are engaged in the design and implementation of ICT for Development (ICT4D) projects and want to improve their understanding of the role Free and Open Source Software can play.

Victor van Reijswoud; Arjan de Jager

2008-08-27T23:59:59.000Z

473

Testing the theory of relative defect proneness for closed-source software  

Science Journals Connector (OSTI)

Recent studies on open-source software (OSS) products report that smaller modules are proportionally more defect prone compared to larger ones. This phenomenon, referred to as the Theory of Relative Defect Proneness (RDP), challenges the traditional ... Keywords: Closed---source software, Planning for software quality assurance, Size---defect relationship, Software inspections, Software metrics, Software reviews, Software science, Software testing

Gunes Koru; Hongfang Liu; Dongsong Zhang; Khaled Emam

2010-12-01T23:59:59.000Z

474

NREL's OpenStudio Helps Design More Efficient Buildings (Fact Sheet)  

SciTech Connect (OSTI)

The National Renewable Energy Laboratory (NREL) has created the OpenStudio software platform that makes it easier for architects and engineers to evaluate building energy efficiency measures throughout the design process. OpenStudio makes energy modeling more accessible and affordable, helping professionals to design structures with lower utility bills and less carbon emissions, resulting in a healthier environment. OpenStudio includes a user-friendly application suite that makes the U.S. Department of Energy's EnergyPlus and Radiance simulation engines easier to use for whole building energy and daylighting performance analysis. OpenStudio is freely available and runs on Windows, Mac, and Linux operating systems.

Not Available

2014-07-01T23:59:59.000Z

475

Software-Based Challenges of Developing the Future Distribution Grid  

SciTech Connect (OSTI)

The software that the utility industry currently uses may be insufficient to analyze the distribution grid as it rapidly modernizes to include active resources such as distributed generation, switch and voltage control, automation, and increasingly complex loads. Although planners and operators have traditionally viewed the distribution grid as a passive load, utilities and consultants increasingly need enhanced analysis that incorporates active distribution grid loads in order to ensure grid reliability. Numerous commercial and open-source tools are available for analyzing distribution grid systems. These tools vary in complexity from providing basic load-flow and capacity analysis under steady-state conditions to time-series analysis and even geographical representations of dynamic and transient events. The need for each type of analysis is not well understood in the industry, nor are the reasons that distribution analysis requires different techniques and tools both from those now available and from those used for transmission analysis. In addition, there is limited understanding of basic capability of the tools and how they should be practically applied to the evolving distribution system. The study reviews the features and state of the art capability of current tools, including usability and visualization, basic analysis functionality, advanced analysis including inverters, and renewable generation and load modeling. We also discuss the need for each type of distribution grid system analysis. In addition to reviewing basic functionality current models, we discuss dynamics and transient simulation in detail and draw conclusions about existing software?s ability to address the needs of the future distribution grid as well as the barriers to modernization of the distribution grid that are posed by the current state of software and model development. Among our conclusions are that accuracy, data transfer, and data processing abilities are key to future distribution grid modeling, and measured data sources are a key missing element . Modeling tools need to be calibrated based on measured grid data to validate their output in varied conditions such as high renewables penetration and rapidly changing topology. In addition, establishing a standardized data modeling format would enable users to transfer data among tools to take advantage of different analysis features. ?

Stewart, Emma; Kiliccote, Sila; McParland, Charles

2014-06-01T23:59:59.000Z

476

Software Reliability Cases: The Bridge Between Hardware, Software and System Safety and Reliability  

SciTech Connect (OSTI)

High integrity/high consequence systems must be safe and reliable; hence it is only logical that both software safety and software reliability cases should be developed. Risk assessments in safety cases evaluate the severity of the consequences of a hazard and the likelihood of it occurring. The likelihood is directly related to system and software reliability predictions. Software reliability cases, as promoted by SAE JA 1002 and 1003, provide a practical approach to bridge the gap between hardware reliability, software reliability, and system safety and reliability by using a common methodology and information structure. They also facilitate early insight into whether or not a project is on track for meeting stated safety and reliability goals, while facilitating an informed assessment by regulatory and/or contractual authorities.

Herrmann, D.S.; Peercy, D.E.

1999-01-08T23:59:59.000Z

477

Take Two Software Updates and See Me in the Morning: The Case for Software Security Evaluations of Medical Devices  

E-Print Network [OSTI]

& Radiation Emitting Device Recalls--finding that between 2002­2010, there were 537 recalls of softwareTake Two Software Updates and See Me in the Morning: The Case for Software Security Evaluations--Medical devices used for critical care are becoming increasingly reliant on software; however, little

Song, Dawn

478

LBNL Windows & Daylighting Software -- WINDOW  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

WINDOW WINDOW NFRC Certification Version Release Version Beta Version WINDOW 6.3 (For NFRC Certification and modeling Complex Glazing Systems) WINDOW 7.1 For modeling vacuum glazing, deflected glass, vertical venetian blinds and perforated screens WINDOW 7.2 For modeling Cellular Shades, in addition to vacuum glazing, deflected glass, vertical venetian blinds and perforated screens Download WINDOW 6.3 (for NFRC Certification and complex glazing systems) Download WINDOW 7.1 Download WINDOW 7.2 Knowledge Base (Check here first if you are experiencing a problem with the software) Knowledge Base (Check here first if you are experiencing a problem with the software) Knowledge Base (Check here first if you are experiencing a problem with the software) New Features

479

Software Categories | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

Categories Categories Print page Print page Email page Email page Category Description Distribution Limitation Audience Announcement Distribution Source Classified Software that has been categorized according to DOE M 475.1-1A Limited Requires security clearance; Based on need-to-know OSTI Submitting Site Copyrighted - Limited Government License (COPY/LIM) Software that a DOE contractor has asserted rights and limits ESTSC distribution to Federal agencies and their contractors only. All other requests are referred to submitting site. Limited (OUO) Federal Agencies and Their Contractors OSTI OSTI or in accordance with DOE-approved site agreements Copyrighted - Broad Government License (COPY/UNL) Software that a DOE contractor has asserted rights but does not limit ESTSC distribution.

480

Reliable Software Development for Machine Protection Systems  

E-Print Network [OSTI]

The Controls software for the Large Hadron Collider (LHC) at CERN, with more than 150 millions lines of code, resides amongst the largest known code bases in the world1. Industry has been applying Agile software engineering techniques for more than two decades now, and the advantages of these techniques can no longer be ignored to manage the code base for large projects within the accelerator community. Furthermore, CERN is a particular environment due to the high personnel turnover and manpower limitations, where applying Agile processes can improve both, the codebase management as well as its quality. This paper presents the successful application of the Agile software development process Scrum for machine protection systems at CERN, the quality standards and infrastructure introduced together with the Agile process as well as the challenges encountered to adapt it to the CERN environment.

Anderson, D; Dragu, M; Fuchsberger, K; Garnier, JC; Gorzawski, AA; Koza, M; Krol, K; Misiowiec, K; Stamos, K; Zerlauth, M

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "including energyplus software" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Radiobiological modelling with MarCell software  

SciTech Connect (OSTI)

Jones introduced a bone marrow radiation cell kinetics model with great potential for application in the fields of health physics, radiation research, and medicine. However, until recently, only the model developers have been able to apply it because of the complex array of biological and physical assignments needed for evaluation of a particular radiation exposure protocol. The purpose of this article is to illustrate the use of MarCell (MARrow CELL Kinetics) software for MS-DOS, a user-friendly computer implementation of that mathematical model that allows almost anyone with an elementary knowledge of radiation physics and/or medical procedures to apply the model. A hands-on demonstration of the software will be given by guiding the user through evaluation of a medical total body irradiation protocol and a nuclear fallout scenario. A brief overview of the software is given in the Appendix.

Hasan, J.S.; Jones, T.D.

1996-10-01T23:59:59.000Z

482

Building Energy Software Tools Directory: Eco Lumen  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Eco Lumen Eco Lumen Eco Lumen logo. Lighting design software, structured to recommend lighting designs that optimize the electricity bills while ensuring appropriate illumination levels in the facility as per ISI standards. The software is built around a user-friendly interface and requires elementary inputs such as room dimensions and usage parameters. The software can then recommend the most appropriate lighting equipment for the facility as well as the optimum number of fittings required. For existing facilities, Eco Lumen recommends the most appropriate upgrade options, for replacing the existing lighting products with more energy efficient ones. Eco Lumen also offers the option of re-using any applicable fittings for the room being designed, thus reducing the renovation cost for the facility. Screen Shots

483

Prodigal: Microbial Gene Prediction Software  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Screenshot Screenshot Artemis Screenshot of Prodigal Results Compared with Curated Annotations and other Computational Genefinders for Anaeromyxobacter dehalogenans 2CP-C (Click to enlarge) Prodigal (Prokaryotic Dynamic Programming Genefinding Algorithm) is a microbial (bacterial and archaeal) gene finding program developed at Oak Ridge National Laboratory and the University of Tennessee. Key features of Prodigal include: Speed: Prodigal is an extremely fast gene recognition tool (written in very vanilla C). It can analyze an entire microbial genome in 30 seconds or less. Accuracy: Prodigal is a highly accurate gene finder. It correctly locates the 3' end of every gene in the experimentally verified Ecogene data set (except those containing introns). It possesses a very

484

Demonstration of integrated optimization software  

SciTech Connect (OSTI)

NeuCO has designed and demonstrated the integration of five system control modules using its proprietary ProcessLink{reg_sign} technology of neural networks, advanced algorithms and fuzzy logic to maximize performance of coal-fired plants. The separate modules control cyclone combustion, sootblowing, SCR operations, performance and equipment maintenance. ProcessLink{reg_sign} provides overall plant-level integration of controls responsive to plant operator and corporate criteria. Benefits of an integrated approach include NOx reduction improvement in heat rate, availability, efficiency and reliability; extension of SCR catalyst life; and reduced consumption of ammonia. All translate into cost savings. As plant complexity increases through retrofit, repowering or other plant modifications, this integrated process optimization approach will be an important tool for plant operators. 1 fig., 1 photo.

NONE

2008-01-01T23:59:59.000Z

485

Building Energy Software Tools Directory: Polysun  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Polysun Polysun Polysun logo Polysun 4 is renewable energy system simulation software for planners and installers of energy systems. Polysun 4 helps users to configure and optimize solar and heat pump systems. Generated reports facilitate communication and marketing tasks. Polysun 4 makes system design simple and professional. Reliable yield-forecasts generated from integrated meteorological data create trust and promote understanding. Detailed models of the systems within the simulation software serve as the foundation for targeted system optimisation and system comparisons. Polysun 4 accelerates the planning process; provides reliable yield forecasts; enables easy optimization of existing and new systems; provides relevant information when applying for subsidies; easily generates PDF reports for customers.

486

Building Energy Software Tools Directory: Pipe-Flo  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Pipe-Flo Pipe-Flo Pipe-flo logo Flow analysis software used to design, optimize, troubleshoot and simulate the operation of piping systems of any size or configuration. PIPE-FLO provides a total picture of the piping system including the flow and pressures in pipelines, along with the interaction of pumps, control valves, and flow meters. PIPE-FLO products are used worldwide in a variety of applications throughout many industries including HVAC, fire sprinkler, wastewater collection and treatment, mining, ultra-pure water, chemical processing, power generation, pulp & paper and general industrial. Screen Shots Keywords piping analysis, pump selection, piping design, hydraulic analysis, pump sizing, pressure drop calculator, hydraulic modeling, steam distribution,

487

Qualified Software for Calculating Commercial Building Tax Deducations |  

Broader source: Energy.gov (indexed) [DOE]

Qualified Software for Calculating Commercial Building Tax Qualified Software for Calculating Commercial Building Tax Deducations Qualified Software for Calculating Commercial Building Tax Deducations On this page you'll find a list of qualified computer software for calculating commercial building energy and power cost savings that meet federal tax incentive requirements. To submit software for consideration to be added to this list, please read Requirements and Submission Process for Qualified Software. Qualified Software per IRS Notice 2006-52 as amplified by IRS Notice 2008-40, Section 4 The following software satisfies the requirements under Internal Revenue Service (IRS) Code §179D (c)(1) and (d) Regulations, Notice 2006-52 Section 6, dated June 2, 2006 as amplified by Notice 2008-40, Section 4. See the IRS requirements document for each version of software for details.

488

Processes in Securing Open Architecture Software Systems  

E-Print Network [OSTI]

, and development practices play in facilitating or constrain- ing these processes through the case study. Our/variants. We employ a case study focusing on an OA software system whose security must be continually sustained versus descriptive practice of these processes and tool usage in studies of conventional and open source

Scacchi, Walt

489

Compositional Algorithmic Verification of Software Product Lines  

E-Print Network [OSTI]

, and Siavash Soleimanifard2 1 Technische Universit¨at Braunschweig, Germany i.schaefer@tu-braunschweig.de 2 Royal Institute of Technology, Stockholm, Sweden {dilian,siavashs}@csc.kth.se Abstract. Software product expressiveness and a clean and simple model suitable for compositional verification. We generalize a previously

Gurov, Dilian

490

A robust software watermarking for copyright protection  

Science Journals Connector (OSTI)

This paper advocates protecting software copyright through hiding watermarks in various data structures used by the code, e.g., B+-trees, R-trees, linked lists, etc. Prior proposals hide the watermarks in dummy data structures, e.g., linked lists and ... Keywords: Copyright protection, Information security, Multimedia indexes, R-trees, Spatial data structures, Watermarking

Ibrahim Kamel, Qutaiba Albluwi

2009-09-01T23:59:59.000Z

491

Aspects of abstraction in software development  

Science Journals Connector (OSTI)

Abstraction is a fundamental tool of human thought in every context. This essay briefly reviews some manifestations of abstraction in everyday life, in engineering and mathematics, and in software and system development. Vertical and horizontal abstraction ... Keywords: Abstraction, Analogic model, Bottom-up design, Free abstraction, Grounded abstraction, Horizontal abstraction, Monsters, Refinement, Theory, Top-down design, Vertical abstraction

Michael Jackson

2012-10-01T23:59:59.000Z

492

Computer Communications Software Scott D. Stoller  

E-Print Network [OSTI]

and maximum intervals between messages in certain situa- tions), and semantics (i.e., the meaning of eachComputer Communications Software Scott D. Stoller Indiana University July 29, 1998 Introduction message format (e.g., message length, division into elds, and data encoding), timing (e.g., minimum

Stoller, Scott

493

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect (OSTI)

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2.

CUNNINGHAM, L.T.

1999-09-27T23:59:59.000Z

494

For Service Providers and Software Developers  

Broader source: Energy.gov [DOE]

DOE welcomes use of the Asset Score by energy services companies, consultants, software providers, and other parties that offer services to building owners to improve the energy efficiency of buildings. Such providers can integrate their tools seamlessly with the Asset Score through an application programming (API) interface.

495

Multi-Objective Hardware/Software  

E-Print Network [OSTI]

1 Multi-Objective Hardware/Software Co-Exploration CristinaCristina SilvanoSilvano silvano et al. CASES-02] ­ Architectural and Compiler techniques for energy reduction [Bellas et al. TVLSI-00-Objective Optimization Problem: Solutions Comparison · Is A-Curve better than B-Curve? How much? · Different techniques

Silvano, Cristina

496

Systems Engineering Introduction to Software Quality Management  

E-Print Network [OSTI]

for quality management ISO 9001:2000 is a generic model of the quality process; ISO 9001:2008 clarifies ISO 9001:2000 ISO 9001:2008 applicable to any organisation that designs, develops and maintains products (or services) ISO 9000-3 interprets 9001 for software dev. 12 Features of ISO 9001:2008 Organisational

Bryson, Joanna J.

497

Secret Ninja Testing with HALO Software Engineering  

E-Print Network [OSTI]

· Testing can be tedious - there is low student engagement and interest in testing 2 #12;Gamification 3 · We propose a social approach to expose students to software testing using gamification · Our gamification gamification platform · Eclipse plugin · Maps various SE features to game world - Doesn't have to follow

Kaiser, Gail E.

498

IBM Software Data Sheet IBM adaptive threat  

E-Print Network [OSTI]

IBM Software Data Sheet IBM adaptive threat protection Stay ahead of security threats with a state-of-the-art network protection engine Highlights Identify high-risk threats and zero-day attacks with protocol-based, behavioral anomaly detection Protect end users against the latest web-based threats, such as SQL injection

499

PROVIDING TRANSPARENCY IN THE BUSINESS OF SOFTWARE  

E-Print Network [OSTI]

NETWORKS Slinger Jansen s.jansen@cs.uu.nl, Utrecht University, NETHERLANDS Sjaak Brinkkemper s with these decisions (Jansen, 2006A). A SSN is a series of linked software, hardware, and service organizations the supply chain. The same holds for other work on SCM, such Jansen, S., Brinkkemper, S., Finkelstein, A

Finkelstein, Anthony

500

Abstracting context in event-based software  

Science Journals Connector (OSTI)

With the recent immersion of advanced mobile devices in the daily lives of millions, pervasive computing is becoming a reality. Developing pervasive software systems is inherently difficult though it requires to deal with heterogeneous infrastructure ... Keywords: aspect, context, distribution, event, protocol

Adrian Holzer; Lukasz Ziarek; K. R. Jayaram; Patrick Eugster

2012-01-01T23:59:59.000Z