Sample records for including climatology configurable

  1. ARM: Surface Radiation Measurement Quality Control testing, including climatologically configurable limits

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Hodges, Gary; Stoffel, Tom; Kutchenreiter, Mark; Kay, Bev; Habte, Aron; Ritsche, Michael; Morris, Victor; Anderberg, Mary

    Surface Radiation Measurement Quality Control testing, including climatologically configurable limits

  2. EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE FLOW INSIDE A CONFIGURATION INCLUDING AN AXIAL PUMP AND A TUBULAR

    E-Print Network [OSTI]

    Boyer, Edmond

    EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE FLOW INSIDE A CONFIGURATION INCLUDING AN AXIAL PUMP-30723) In centrifugal and axial pumps, the flow is characterized by a turbulent and complex behavior and also of a configuration that includes an axial pump and a bundle of tubes that mimics the cool source of a heat exchanger

  3. Hanford Site Climatological Data Summary 1999 with Historical Data

    SciTech Connect (OSTI)

    Hoitink, Dana J.; Burk, Kenneth W.; Ramsdell, James V.

    2000-05-11T23:59:59.000Z

    This document presents the climatological data measured at the Hanford Site for claendar year 1999. The information contained includes updated historical climatologies for temperature, precipitation, normal and extreme values of temperature and precipitaion and other meteorological parameters.

  4. Climatological data summary 1993 with historical data

    SciTech Connect (OSTI)

    Hoitink, D.J.; Burk, K.W.

    1994-06-01T23:59:59.000Z

    This document presents the climatological data summary for calendar year 1993. It presents updated historical climatologies for temperature, wind, precipitation, and other miscellaneous meteorological parameters from the Hanford Meteorology Station (HMS) and Hanford Meteorological Monitoring Network. It also presents climatological normal and extreme values of temperature and precipitation for the HMS. Previous documents have included climatological data collected at the old Hanford Townsite, located approximately 10 miles east-northeast of the present HMS. The records for these two different sites have been frequently interchanged as if representing the same location. With the exception of Section 2.0, the remainder of this document uses data only from the HMS, with a period of record beginning December 7, 1944.

  5. Engineering Analysis of Intermediate Loop and Process Heat Exchanger Requirements to Include Configuration Analysis and Materials Needs

    SciTech Connect (OSTI)

    T.M. Lillo; R.L. Williamson; T.R. Reed; C.B. Davis; D.M. Ginosar

    2005-09-01T23:59:59.000Z

    The need to locate advanced hydrogen production facilities a finite distance away from a nuclear power source necessitates the need for an intermediate heat transport loop (IHTL). This IHTL must not only efficiently transport energy over distances up to 500 meters but must also be capable of operating at high temperatures (>850oC) for many years. High temperature, long term operation raises concerns of material strength, creep resistance and general material stability (corrosion resistance). IHTL design is currently in the initial stages. Many questions remain to be answered before intelligent design can begin. The report begins to look at some of the issues surrounding the main components of an IHTL. Specifically, a stress analysis of a compact heat exchanger design under expected operating conditions is reported. Also the results of a thermal analysis performed on two ITHL pipe configurations for different heat transport fluids are presented. The configurations consist of separate hot supply and cold return legs as well as annular design in which the hot fluid is carried in an inner pipe and the cold return fluids travels in the opposite direction in the annular space around the hot pipe. The effects of insulation configurations on pipe configuration performance are also reported. Finally, a simple analysis of two different process heat exchanger designs, one a tube in shell type and the other a compact or microchannel reactor are evaluated in light of catalyst requirements. Important insights into the critical areas of research and development are gained from these analyses, guiding the direction of future areas of research.

  6. Contemporary Lake Superior Ice Cover Climatology Raymond A. Assel

    E-Print Network [OSTI]

    Contemporary Lake Superior Ice Cover Climatology Raymond A. Assel NOAA Great Lakes Environmental Introduction A brief discussion of Lake Superior ice cover climatology (Phillips, 1978) was included) almost three decades ago. Much additional information (and analysis) of Great Lakes ice cover has been

  7. Hanford Site climatological data summary 1996, with historical data

    SciTech Connect (OSTI)

    Hoitink, D.J.; Burk, K.W.

    1997-04-01T23:59:59.000Z

    This document presents the climatological data measured at the US Department of Energy`s Hanford Site for calendar year 1996. Pacific Northwest National Laboratory operates the Hanford Meteorology Station and the Hanford Meteorological Monitoring Network from which these data were collected. The information includes updated historical climatologies for temperature, precipitation, normal and extreme values of temperature and precipitation, and other miscellaneous meteorological parameters.

  8. #include #include

    E-Print Network [OSTI]

    Campbell, Andrew T.

    process #12;#include #include pid_t pid = fork(); if (pid () failed */ } else if (pid == 0) { /* parent process */ } else { /* child process */ } #12;thread #12

  9. #include #include

    E-Print Network [OSTI]

    Poinsot, Laurent

    #include #include //Rappels : "getpid()" permet d'obtenir son propre pid // "getppid()" renvoie le pid du père d'un processus int main (void) { pid_t pid_fils; pid_fils = fork(); if(pid_fils==-1) { printf("Erreur de création du processus fils\

  10. Hanford Site climatological data summary 1997, with historical data

    SciTech Connect (OSTI)

    Hoitink, D.J.; Burk, K.W.

    1998-03-01T23:59:59.000Z

    This document presents the climatological data measured at the U.S. Department of Energy`s Hanford Site for calendar year 1997. Pacific Northwest National Laboratory operates the Hanford Meteorology Station and the Hanford Meteorological Monitoring Network from which these data were collected. The information contained herein includes updated historical climatologies for temperature, precipitation, normal and extreme values of temperature and precipitation, and other miscellaneous meteorological parameters. Further, the data are adjunct to and update Hoitink and Burk; however, Appendix B - Wind Climatology is excluded.

  11. Module Configuration

    DOE Patents [OSTI]

    Oweis, Salah (Ellicott City, MD); D'Ussel, Louis (Bordeaux, FR); Chagnon, Guy (Cockeysville, MD); Zuhowski, Michael (Annapolis, MD); Sack, Tim (Cockeysville, MD); Laucournet, Gaullume (Paris, FR); Jackson, Edward J. (Taneytown, MD)

    2002-06-04T23:59:59.000Z

    A stand alone battery module including: (a) a mechanical configuration; (b) a thermal management configuration; (c) an electrical connection configuration; and (d) an electronics configuration. Such a module is fully interchangeable in a battery pack assembly, mechanically, from the thermal management point of view, and electrically. With the same hardware, the module can accommodate different cell sizes and, therefore, can easily have different capacities. The module structure is designed to accommodate the electronics monitoring, protection, and printed wiring assembly boards (PWAs), as well as to allow airflow through the module. A plurality of modules may easily be connected together to form a battery pack. The parts of the module are designed to facilitate their manufacture and assembly.

  12. Wind Climatology Literature Review Jake Crouch October 12, 2010

    E-Print Network [OSTI]

    Wind Climatology Literature Review Jake Crouch October 12, 2010 The National Centers and climate forecast models and to monitor atmospheric phenomenon such as atmospheric winds, temperature dataset, including atmospheric winds, and set a precedent for using the dataset in a climate monitoring

  13. A Computer Tutorial for Great Lakes Ice Cover Climatology

    E-Print Network [OSTI]

    A Computer Tutorial for Great Lakes Ice Cover Climatology R.A. ASSELL U.S. Department of Commerce tutorial was developed to provide an overview of the annual ~ r e a fLakes ice cycle. The tutorial includes an animation to aid in visualizing the normal seasonal progression and the spatial patterns of ice cover

  14. Workshop report: planning for Coastal Climatologies

    E-Print Network [OSTI]

    Gamble, Douglas W.

    : agriculture, coastal transportation, energy conservation and planning, environmental quality, fishery as stakeholder response and feedback received at the workshop. Based on stakeholder input, a coastal climatology

  15. Hanford Site Climatological Data Summary 1998

    SciTech Connect (OSTI)

    DJ Hoitink; JV Ramsdell; KW Burk

    1999-05-26T23:59:59.000Z

    This document presents the climatological data measured at the U.S. Department of Energy's Hanford Site for calendar year 1998. Pacific Northwest National Laboratory operates the Hanford Meteorology Station and the Hanford Meteorological Monitoring Network from which these data were collected. The information contained herein includes updated historical climatologies for temperature; precipitation, normal and extreme values of temperature and precipitation and other miscellaneous meteorological parameters. Further, the data are adjunct to and update Hoitink and Burk (1994, 1995, 1996, 1997, 1998); however, Appendix B--Wind Climatology (1994) is excluded. 1998 was much warmer than normal, tying 1992 as the warmest year on record. The average temperature was 56.4 F, 3.1 F above normal (53.3 F). The highest July temperature ever recorded was 112 F on July 27, 1998. The first week in May, three daily temperature records were broken or tied. November 1998 was the third warmest on record. For the year 1998, there were 73 days with maximum temperature >90 F, the third highest on record. For the 12-month period, 11 months were warmer than normal and 1 was cooler than normal. The summer (June, July, and August) and autumn (September, October, and November) of 1998 were the fourth warmest on record. 1998 was slightly wetter than normal. Precipitation totaled 6.45 in., 103% of normal (6.26 in.); snow-fall totaled 7.2 in., compared to the normal of 13.8 in. There were eight thunderstorms recorded at Hanford Meteorological Station in July 1998, tying 1983 for the most thunderstorms in July. The average wind speed during 1998 was 7.9 mph, 0.2 mph above normal (7.7 mph). There were 32 days with peak gusts {ge}40 mph, compared to a yearly average of 26 mph. The peak gust during the year was 56 mph from the south-southwest on November 21. November 1998 had a record number of days (10) with wind gusts {ge}40 mph. The heating-degree days for 1997-1998 were 4,523 (14% below the 5,231 normal). Cooling-degree days for 1998 were 1,377 (38% above the 994 normal).

  16. Satellite Meteorology and Climatology Division Roadmap

    E-Print Network [OSTI]

    Kuligowski, Bob

    Satellite Meteorology and Climatology Division Roadmap NOAA NESDIS Center for Satellite Applications and Research #12;SMCD Roadmap 2 NOAA/NESDIS/STAR Satellite Meteorology and Climatology Division Roadmap September 2005 NOAA Science Center, 5200 Auth Road, Room 712, Camp Springs, MD 20746 #12;SMCD

  17. Hanford Site climatological data summary 1995 with historical data

    SciTech Connect (OSTI)

    Hoitink, D.J.; Burk, K.W.

    1996-05-01T23:59:59.000Z

    This document presents the climatological data measured at the US Department of Energy`s Hanford Site for calendar year 1995. Pacific Northwest National Laboratory operates the Hanford Meteorology Station and the Hanford Meteorological Monitoring Network from which these data were collected. The information contained herein includes updated historical climatologies for temperature, precipitation, normal and extreme values of temperature and precipitation, and other miscellaneous meteorological parameters. Further, the data are adjunct to and update Hoitink and Burk (1994, 1995); however, Appendix B--Wind Climatology (1994) is excluded. 1995 was warmer than normal, averaging 54.7 F, 1.4 F above normal (53.3 F). For the 12-month period, 8 months were warmer than normal, and 4 were cooler than normal. 1995 was the wettest year on record. Precipitation totaled 12.31 in., 197% of normal (6.26 in.); snowfall totaled 7.7 in., compared to the normal of 13.8 in. The average wind speed during 1995 was 7.8 mph, 0.1 mph above normal (7.7 mph). The peak gust during the year was 61 mph from the south-southwest on December 12. There were 27 days with peak gusts {ge} 40 mph, compared to a yearly average of 26.

  18. Climatology of extreme rainfall from rain gauges and weather radar

    E-Print Network [OSTI]

    Stoffelen, Ad

    by conventional rain gauge networks. A 10-year radar-based climatology of rainfall depths for durations of 15 minClimatology of extreme rainfall from rain gauges and weather radar Aart Overeem #12;Thesis:30 PM in the Aula #12;Aart Overeem Climatology of extreme rainfall from rain gauges and weather radar

  19. 44 | Triennial Scientific Report Extreme rainfall climatology

    E-Print Network [OSTI]

    Stoffelen, Ad

    ,whichcan,forexample,be usedfordesignpurposesinwatermanagementorthe evaluationoftherarityofsevereweather. Radar and rain gauge data KNMIoperatestwo(MFBS). Raingaugesproducepointmeasurements,whereasradar KNMI has an archive of 11 years of radar rainfall depths for the entire land surface44 | Triennial Scientific Report Extreme rainfall climatology from weather radar Aart Overeem, Iwan

  20. Hanford Site climatological data summary 1999 with historical data

    SciTech Connect (OSTI)

    DJ Hoitink; KW Burk; JV Ramsdell

    2000-05-11T23:59:59.000Z

    This document presents the climatological data measured at the US Department of Energy's Hanford Site for calendar year 1999. Pacific Northwest National Laboratory operates the Hanford Meteorology Station and the Hanford Meteorological Monitoring Network from which these data were collected. The information contained herein includes updated historical climatologies for temperature, precipitation, normal and extreme values of temperature and precipitation, and other miscellaneous meteorological parameters. Further, the data are adjunct to and update Hoitink et al. (1999), and Hoitink and Burk (1994, 1995, 1996, 1997, 1998); however, Appendix B-Wind Climatology (1994) is excluded. 1999 was warmer than normal at the Hanford Meteorology Station with an average temperature of 54.4 F, 1.1 F above normal (53.3 F). The hottest temperature was 105 F on July 28, while the coldest was 18 F on January 3. The maximum temperature of 64 F on August 30 was the lowest maximum temperature ever recorded in August, while the maximum temperature of 76 F on November 13 was the highest maximum temperature ever recorded in November. For the 12-month period, 6 months were warmer than normal and 6 were cooler than normal. 1999 was the fourth driest year on record. Precipitation totaled 3.75 inches, 60% of normal (6.26 inches); snowfall totaled 0.6 inch, the least calendar year snowfall on record (compared to the normal of 13.8 inches). 1999 was the windiest year on record with an average wind speed of 8.8 mph, 1.1 mph above normal (7.7 mph). There were 48 days with peak gust {ge} 40 mph, compared to a yearly average of 26 mph. The peak gust during the year was 65 mph on February 6. The heating-degree days for 1998--1999 were 4,802 (8% below the 5,231 normal). Cooling-degree days for 1999 were 891 (10% below the 994 normal).

  1. CLIMATOLOGY OF VERTICAL AIR MOTION DURING RAINFALL IN NIAMEY, NIGER AND BLACK FOREST, GERMANY USING AN

    E-Print Network [OSTI]

    CLIMATOLOGY OF VERTICAL AIR MOTION DURING RAINFALL IN NIAMEY, NIGER AND BLACK FOREST, GERMANY USING in Niamey, Niger and eight months in Germany's Black Forest. The AMF includes a vertically pointing 95 GHz of the orographically influenced precipitation in Germany's mountains. __________ NOTICE: This manuscript has been

  2. Wind shear climatology for large wind turbine generators

    SciTech Connect (OSTI)

    Elliott, D.L.; Wendell, L.L.; Heflick, S.K.

    1982-10-01T23:59:59.000Z

    Climatological wind shear analyses relevant to the design and operation of multimegawatt wind turbines are provided. Insight is provided for relating the wind experienced by a rotating blade in a shear flow to the analysis results. A simple analysis of the wind experienced by a rotating blade for three types of wind shear profiles under steady-state conditions is presented in graphical form. Comparisons of the magnitude and frequency of the variations in 1) the wind sensed by a single blade element, 2) the sum, and 3) the difference of the winds sensed by opposite blade elements show strong sensitivity to profile shape. These three items represent forcing functions that can be related to 1) flatwise bending moment, 2) torque on the shaft, and 3) teeter angle. A computer model was constructed to simulate rotational sampling of 10-s sampled winds from a tall tower for three different types of large wind turbines. Time series produced by the model indicated that the forcing functions on a rotating blade vary according to the shear profile encountered during each revolution as opposed to a profile derived from average wind conditions, e.g., hourly average winds. An analysis scheme was developed to establish a climatology of wind shear profiles derived from 10-s sampled winds and hourly average winds measured over a one-year period at several levels on a tall tower. Because of the sensitivity of the forcing function variability to profile shape, the analyses performed and presented are in the form of joint frequency distributions of velocity differences of the the top-to-hub versus the hub-to-bottom portion of disks of rotation for the three turbine configurations.

  3. Hanford Site Climatological Data Summary 2000 with Historical Data

    SciTech Connect (OSTI)

    Hoitink, Dana J.; Burk, Kenneth W.; Ramsdell, James V.

    2001-05-30T23:59:59.000Z

    This document presents the climatological data measured at the U.S. Department of Energy's Hanford Site for calendar year 2000.

  4. Configurations The

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory (PSEL) The primary testing tracker, with multiple PV modules, at Sandia's Photovoltaic Systems Evaluation Laboratory. PSEL's equipment includes a 2-axis outdoor...

  5. Client Configuration and Installation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Installation HSI Configuration and Installation Configuration Instructions This distribution has default configuration settings which will work for most environments. If...

  6. Predicting Daily Net Radiation Using Minimum Climatological Data1

    E-Print Network [OSTI]

    Predicting Daily Net Radiation Using Minimum Climatological Data1 S. Irmak, M.ASCE2 ; A. Irmak3 ; J Abstract: Net radiation (Rn) is a key variable for computing reference evapotranspiration and is a driving for predicting daily Rn have been widely used. However, when the paucity of detailed climatological data

  7. Pump apparatus including deconsolidator

    DOE Patents [OSTI]

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07T23:59:59.000Z

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  8. Ozone Climatologies Figure 1: Ozone climatology for control run in kg/m(a), percentage change in

    E-Print Network [OSTI]

    Feigon, Brooke

    Ozone Climatologies (a) (b) (c) Figure 1: Ozone climatology for control run in kg/m(a), percentage change in ozone for the perturbed runs; tropopause region (b), whole stratosphere (c). Determining the impact of lower stratospheric ozone depletion on Southern Hemisphere climate Sarah P.E. Keeley and Nathan

  9. Applications of Climatology and Meteorology to Hydrologic Simulation

    E-Print Network [OSTI]

    Clark, R. A.; O'Connor, G. E.

    TR-38 1971 Applications of Climatology and Meteorology to Hydrologic Simulation R.A. Clark G.E. O?Connor Texas Water Resources Institute Texas A&M University ...

  10. NOAA Technical Memorandum GLERL-135 Great Lakes Ice Cover Climatology

    E-Print Network [OSTI]

    ____________________________________________________________________________ Great Lakes Ice Cover Climatology Update: Winters 2003, 2004, and 2005 Raymond A. Assel NOAA, Great..................................................................................................6 DATES OF FIRST (LAST) ICE AND ICE DURATION. .............................................................7 SEASONAL PROGRESSION OF ICE COVER

  11. Development of an ozone climatology for Harris County, Texas

    SciTech Connect (OSTI)

    Balentine, H.W.; Carter, J.C. (Radian Corp., Austin, TX (USA)); Preston, J. (Tenneco Polymers, Houston, TX (US))

    1987-01-01T23:59:59.000Z

    The Houston Regional Monitoring Corporation (HRM) has performed continuous ambient air quality and meteorological monitoring in the Ship Channel area of east Harris County since August 1981. The HRM monitoring network is one of the largest Environmental Protection Agency (EPA) approved Prevention of Significant Deterioration (PSD) monitoring network in the United States operated by an industrial group. As an adjunct to its monitoring. HRM has funded extensive meteorological and statistical analyses of ozone monitoring data in Harris County. One of the goals of these studies was to determine those meteorological conditions responsible for the formation of elevated ozone concentrations in Harris County. The analyses performed included the use of principal component analysis and cluster analysis. These analysis techniques have individually been applied to ozone and air quality research problems. The combined use of these techniques in this analysis, however, is a unique application of these statistical tools to an ozone air quality analysis. As a result of these analyses, a climatology of those episodes conducive to elevated ozone formation in Harris County was developed.

  12. Harmonic analysis of climatological sea surface salinity Tim P. Boyer and Sydney Levitus

    E-Print Network [OSTI]

    Harmonic analysis of climatological sea surface salinity Tim P. Boyer and Sydney Levitus Ocean: Boyer, T. P., and S. Levitus, Harmonic analysis of climatological sea surface salinity, J. Geophys. Res

  13. Cloud frequency climatology at the Andes/Amazon transition: 1. Seasonal and diurnal cycles

    E-Print Network [OSTI]

    Malhi, Yadvinder

    Cloud frequency climatology at the Andes/Amazon transition: 1. Seasonal and diurnal cycles Kate-scale cloud patterns. We examine the cloud climatology of a tropical Andean montane region in the context Satellite Cloud Climatology Project) DX cloud product (19832008), MODIS (Moderate Resolution Imaging

  14. A synoptic climatology for Southern HIPLEX

    E-Print Network [OSTI]

    Ladd, Judson Ward

    1980-01-01T23:59:59.000Z

    the orientation of the front and, considering the isobaric configuration, a measure of the trajectory of the air behind it. 22 Priaary Lewlc surface features Pl PRE-~ NS NESN EW Secoadary Levelc upper-air faaaczes 51 T ~ 5 R T R 8 8 C 8 5 L 5 8/A 1 2 9... LIST OF TABLES ~ LIST OF FIGURES iv vl. viii LIST OF SYMBOLS 1 INTRODUCTION k~Bkkdd b. Statement of Problem c. Previous Studies d ~B' 2 ~ DATA ~1' t 1 b. Radar Association METHODS 15 ~BB ' ' ~*tl. ~ttt l ' t1 15 1 ) Principal components...

  15. Hurricane Katrina, A Climatological Perspective October 2005, Updated August 2006

    E-Print Network [OSTI]

    #12;1 Hurricane Katrina, A Climatological Perspective October 2005, Updated August 2006 1. Introduction Hurricane Katrina is the most costly natural disaster ever to strike the United States, and the deadliest since the Lake Okeechobee disaster (hurricane) of September, 1928. In addition, Katrina was one

  16. INTERNATIONAL JOURNAL OF CLIMATOLOGY Int. J. Climatol. (2013)

    E-Print Network [OSTI]

    INTERNATIONAL JOURNAL OF CLIMATOLOGY Int. J. Climatol. (2013) Published online in Wiley Online Library (wileyonlinelibrary.com) DOI: 10.1002/joc.3664 Remote influence of South Asian black carbon ABSTRACT: The remote impact of South Asian black carbon (SABC) aerosol on East Asian summer monsoon (EASM

  17. INTERNATIONAL JOURNAL OF CLIMATOLOGY Int. J. Climatol. 34: 3648 (2014)

    E-Print Network [OSTI]

    INTERNATIONAL JOURNAL OF CLIMATOLOGY Int. J. Climatol. 34: 36­48 (2014) Published online 11 February 2013 in Wiley Online Library (wileyonlinelibrary.com) DOI: 10.1002/joc.3664 Remote influence Technology, Islamabad, Pakistan ABSTRACT: The remote impact of South Asian black carbon (SABC) aerosol

  18. Climatology of Large Sediment Resuspension Events in Southern Lake Michigan

    E-Print Network [OSTI]

    Climatology of Large Sediment Resuspension Events in Southern Lake Michigan David J. Schwab1 the southern basin, is subject to recurrent episodes of mas- sive sediment resuspension by storm-induced waves with the largest events are examined. Our analysis indicates that significant resuspension events in southern Lake

  19. Configurations for short period rf undulators

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kuzikov, S. V.; Jiang, Y.; Marshall, T. C.; Sotnikov, G. V.; Hirshfield, J. L.

    2013-07-01T23:59:59.000Z

    Several configurations for rf undulators energized at millimeter wavelengths and designed to produce coherent nanometer radiation from sub-GeV electron beams are analyzed and compared with one another. These configurations include a traveling-wave resonant ring, a standing wave resonator, and a resonator operating close to cutoff.

  20. INTERNATIONAL JOURNAL OF CLIMATOLOGY,VOL. 10,731-748 (1990) AN ICE-COVER CLIMATOLOGY FOR LAKE ERIE AND LAKE

    E-Print Network [OSTI]

    1990-01-01T23:59:59.000Z

    / INTERNATIONAL JOURNAL OF CLIMATOLOGY,VOL. 10,731-748 (1990) AN ICE-COVER CLIMATOLOGY FOR LAKE-lake Great Lakes ice cover are sparse prior to the decade of the 1960s.In an effort to provide an historical perspective of mid-lake ice cover back to the turn of the century, daily average ice cover for Lakes Erie

  1. The CSIRO Mk3L climate system model v1.0 coupled to the CABLE land surface scheme v1.4b: evaluation of the control climatology

    SciTech Connect (OSTI)

    Mao, Jiafu [ORNL; Phipps, S.J. [University of New South Wales; Pitman, A.J. [University of New South Wales; Wang, Yingping [CSIRO Marine and Atmospheric Research; Abramowitz, G. [University of New South Wales; Pak, B. [CSIRO Marine and Atmospheric Research

    2011-01-01T23:59:59.000Z

    The CSIRO Mk3L climate system model, a reduced-resolution coupled general circulation model, has previously been described in this journal. The model is configured for millennium scale or multiple century scale simulations. This paper reports the impact of replacing the relatively simple land surface scheme that is the default parameterisation in Mk3L with a sophisticated land surface model that simulates the terrestrial energy, water and carbon balance in a physically and biologically consistent way. An evaluation of the new model s near-surface climatology highlights strengths and weaknesses, but overall the atmospheric variables, including the near-surface air temperature and precipitation, are simulated well. The impact of the more sophisticated land surface model on existing variables is relatively small, but generally positive. More significantly, the new land surface scheme allows an examination of surface carbon-related quantities including net primary productivity which adds significantly to the capacity of Mk3L. Overall, results demonstrate that this reduced-resolution climate model is a good foundation for exploring long time scale phenomena. The addition of the more sophisticated land surface model enables an exploration of important Earth System questions including land cover change and abrupt changes in terrestrial carbon storage.

  2. Reactor assessments of advanced bumpy torus configurations

    SciTech Connect (OSTI)

    Uckan, N.A.; Owen, L.W.; Spong, D.A.; Miller, R.L.; Ard, W.B.; Pipkins, J.F.; Schmitt, R.J.

    1983-01-01T23:59:59.000Z

    Recently, several configurational approaches and concept improvement schemes were introduced for enhancing the performance of the basic ELMO Bumpy Torus (EBT) concept and for improving its reactor potential. These configurations include planar racetrack and square geometries, Andreoletti coil systems, and bumpy torus-stellarator hybrids (which include twisted racetrack and helical axis stellarator-snakey torus). Preliminary evaluations of reactor implications of each of these configurations have been carried out based on magnetics (vacuum) calculations, transport and scaling relationships, and stability properties. Results indicate favorable reactor projections with a significant reduction in reactor physical size as compared to conventional EBT reactor designs carried out in the past.

  3. HTAR Client Configuration and Installation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and extraction of local files into and out of HPSS. Configuration Instructions This distribution has default configuration settings which will work for most environments. If...

  4. Cisco Reference Configurations for

    E-Print Network [OSTI]

    Chaudhuri, Surajit

    ............................................................................................. 10 EMC VNX5500 Storage Layout.0 with EMC VNX5500 Series Storage Systems White Paper November 2012 2012 Cisco and/or its affiliates. AllCisco Reference Configurations for Microsoft SQL Server 2012 Fast Track Data Warehouse 4.0 with EMC

  5. Method and apparatus configured for identification of a material

    DOE Patents [OSTI]

    Slater, John M. (Idaho Falls, ID); Crawford, Thomas M. (Idaho Falls, ID)

    2000-01-01T23:59:59.000Z

    The present invention includes an apparatus configured for identification of a material, and methods of identifying a material. One embodiment of the invention provides an apparatus including a first region configured to receive a first sample, the first region being configured to output a first spectrum corresponding to the first sample and responsive to exposure of the first sample to radiation; a modulator configured to modulate the first spectrum according to a first frequency; a second region configured to receive a second sample, the second region being configured to output a second spectrum corresponding to the second sample and responsive to exposure of the second sample to the modulated first spectrum; and a detector configured to detect the second spectrum having a second frequency greater than the first frequency.

  6. Modeling of Polar Ocean Tides at the Last Glacial Maximum: Amplification, Sensitivity, and Climatological Implications

    E-Print Network [OSTI]

    Peltier, W. Richard

    , and Climatological Implications STEPHEN D. GRIFFITHS AND W. RICHARD PELTIER Department of Physics, University; Griffiths and Peltier 2008; Arbic et al. 2008). Such changes can impact the climate system in a variety

  7. Role of ammonia chemistry and coarse mode aerosols in global climatological inorganic aerosol distributions

    E-Print Network [OSTI]

    Zender, Charles

    1 Role of ammonia chemistry and coarse mode aerosols in global climatological inorganic aerosol distributions Chao Luo1 , Charles S. Zender1 , Huisheng Bian2 , Swen Metzger3 Abstract We use an inorganic aerosol thermodynamic equilibrium model

  8. A climatology of springtime convection systems over the Northwest Gulf of Mexico and adjacent coasts

    E-Print Network [OSTI]

    Hashem, Magda Sami

    1996-01-01T23:59:59.000Z

    A Springtime (March 15-June 15) climatology of Mesoscale Convective Systems (MCS) has been established on the basis of satellite imagery and radar reflectivities over the Northwest Gulf of Mexico and adjacent coastal areas during 1985...

  9. Lagrangian methods for climatological analysis of regional atmospheric transport with an emphasis on Texas ozone exceedances

    E-Print Network [OSTI]

    Dexheimer, Darielle Nicole

    2004-11-15T23:59:59.000Z

    A quantitative climatology of atmospheric transport in Texas is developed using previously described Lagrangian trajectory methods (Rogers and Bowman, 2001; Bowman and Carrie, 2002). The trajectories are computed using ...

  10. SASSI system software configuration

    SciTech Connect (OSTI)

    Weiner, E.O.

    1994-08-01T23:59:59.000Z

    The SASSI (System for Analysis for Soil-Structure Interaction) computer program was obtained by WHC from the University of California at Berkeley for seismic structural analysis of complex embedded building configurations. SASSI was developed in the 1980`s by a team of doctoral students under the direction of Prof. J. Lysmer. The program treats three-dimensional soil-structure interaction problems with the flexible volume substructuring method. In the 1970`s, the same organization developed the FLUSH program, which has achieved widespread international usage in the seismic analysis of structures. SASSI consists of nine modules, each of which are to be run as a separate execution. The SASSI source code, dated 1989 and identified as a Cray version, was put up on the RL Cray XM/232 Unicos system in 1991. That system was removed at the end of 1993, and SASSI is now installed on the LANL Cray YMP systems.

  11. Power converter connection configuration

    DOE Patents [OSTI]

    Beihoff, Bruce C. (Wauwatosa, WI); Kehl, Dennis L. (Milwaukee, WI); Gettelfinger, Lee A. (Brown Deer, WI); Kaishian, Steven C. (Milwaukee, WI); Phillips, Mark G. (Brookfield, WI); Radosevich, Lawrence D. (Muskego, WI)

    2008-11-11T23:59:59.000Z

    EMI shielding is provided for power electronics circuits and the like via a direct-mount reference plane support and shielding structure. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support forms a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  12. Configuration Studies and Recommendations for the ILC DampingRings

    SciTech Connect (OSTI)

    Wolski, Andrzej; Gao, Jie; Guiducci, Susanna

    2006-02-04T23:59:59.000Z

    We describe the results of studies comparing different options for the baseline configuration of the ILC damping rings. The principal configuration decisions apply to the circumference, beam energy, lattice type, and technology options for key components, including the injection/extraction kickers and the damping wigglers. To arrive at our recommended configuration, we performed detailed studies of a range of lattices representing a variety of different configuration options; these lattices are described in Chapter 2. The results of the various studies are reported in chapters covering issues of beam dynamics, technical subsystems, costs, and commissioning, reliability and upgrade ability. Our detailed recommendations for the baseline configuration are given in Chapter 7, where we also outline further research and development that is needed before a machine using our recommended configuration can be built and operated successfully. In the same chapter, we suggest possible alternatives to the baseline configuration.

  13. Backside configured surface plasmonic enhancement

    SciTech Connect (OSTI)

    Gu, Guiru; Lu, Xuejun, E-mail: xuejun-lu@uml.edu [Department of Electrical and Computer Engineering, University of Massachusetts Lowell, One University Avenue, Lowell, MA 01854 (United States); Vaillancourt, Jarrod [Applied NanoFemto Technologies, LLC, 181 Stedman St. 2, Lowell, MA 01851 (United States)

    2014-03-31T23:59:59.000Z

    In this work, we fabricated, measured and compared the quantum dots infrared photodetector enhancement by the top- and backside- configured plasmonic structures. The backside configured plasmonic structure can provide much higher device performance enhancement. Furthermore, the excitation of the surface plasmonic waves by the top- and backside- configured plasmonic structures was analyzed. Detailed simulation results of the electric field at different wavelength from top illumination and backside illumination were provided. The stronger electric field from the backside illumination attributed to the higher enhancement.

  14. United States Historical Climatology Network (US HCN) monthly temperature and precipitation data

    SciTech Connect (OSTI)

    Daniels, R.C. [ed.] [Univ. of Tennessee, Knoxville, TN (United States). Energy, Environment and Resources Center] [ed.; Univ. of Tennessee, Knoxville, TN (United States). Energy, Environment and Resources Center; Boden, T.A. [ed.] [Oak Ridge National Lab., TN (United States)] [ed.; Oak Ridge National Lab., TN (United States); Easterling, D.R.; Karl, T.R.; Mason, E.H.; Hughes, P.Y.; Bowman, D.P. [National Climatic Data Center, Asheville, NC (United States)] [National Climatic Data Center, Asheville, NC (United States)

    1996-01-11T23:59:59.000Z

    This document describes a database containing monthly temperature and precipitation data for 1221 stations in the contiguous United States. This network of stations, known as the United States Historical Climatology Network (US HCN), and the resulting database were compiled by the National Climatic Data Center, Asheville, North Carolina. These data represent the best available data from the United States for analyzing long-term climate trends on a regional scale. The data for most stations extend through December 31, 1994, and a majority of the station records are serially complete for at least 80 years. Unlike many data sets that have been used in past climate studies, these data have been adjusted to remove biases introduced by station moves, instrument changes, time-of-observation differences, and urbanization effects. These monthly data are available free of charge as a numeric data package (NDP) from the Carbon Dioxide Information Analysis Center. The NDP includes this document and 27 machine-readable data files consisting of supporting data files, a descriptive file, and computer access codes. This document describes how the stations in the US HCN were selected and how the data were processed, defines limitations and restrictions of the data, describes the format and contents of the magnetic media, and provides reprints of literature that discuss the editing and adjustment techniques used in the US HCN.

  15. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration...

    Broader source: Energy.gov (indexed) [DOE]

    SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management...

  16. Configuration Management Plan | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    & Publications SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist NMMSS Software Quality Assurance Plan Software Configuration...

  17. Gauge Configurations for Lattice QCD from The Gauge Connection

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Gauge Connection is an experimental archive for lattice QCD and a repository of gauge configurations made freely available to the community. Contributors to the archive include the Columbia QCDSP collaboration, the MILC collaboration, and others. Configurations are stored in QCD archive format, consisting of an ASCII header which defines various parameters, followed by binary data. NERSC has also provided some utilities and examples that will aid users in handling the data. Users may browse the archive, but are required to register for a password in order to download data. Contents of the archive are organized under four broad headings: Quenched (more than 1200 configurations); Dynamical, Zero Temperature (more than 300 configurations); MILC Improved Staggered Asqtad Lattices (more than 7000 configurations); and Dynamical, Finite Temperature (more than 1200 configurations)

  18. Arctic-Winter Climatology and Radiative Effects of Clouds and Aerosols Based on Lidar and Radar Measurements at PEARL

    E-Print Network [OSTI]

    Eloranta, Edwin W.

    Arctic-Winter Climatology and Radiative Effects of Clouds and Aerosols Based on Lidar and Radar Atmospheric Radiative Transfer (SBDART) code. Results on the climatology and radiative effects of clouds, arctic regions are the site of interactions between aerosols, clouds, radiation and precipitations

  19. Tank monitor and control system (TMACS) software configuration management plan

    SciTech Connect (OSTI)

    GLASSCOCK, J.A.

    1999-05-13T23:59:59.000Z

    This Software Configuration Management Plan (SCMP) describes the methodology for control of computer software developed and supported by the Systems Development and Integration (SD and I) organization of Lockheed Martin Services, Inc. (LMSI) for the Tank Monitor and Control System (TMACS). This plan controls changes to the software and configuration files used by TMACS. The controlled software includes the Gensym software package, Gensym knowledge base files developed for TMACS, C-language programs used by TMACS, the operating system on the production machine, language compilers, and all Windows NT commands and functions which affect the operating environment. The configuration files controlled include the files downloaded to the Acromag and Westronic field instruments.

  20. Radiant-interchange configuration factors

    E-Print Network [OSTI]

    Reddin, Thomas Edward

    1965-01-01T23:59:59.000Z

    an important role in any situation involving radiant interchange. The engineer desiring to compute the radiant heat transfer in a system is usually discouraged from performing more than a superficial estimation because of the excessive amount of time... Monitor System using the Fortran IV Compiler and the Macro Assembly Program. Listings of the programs appear in the appendices. CHAPTER II THE GEOMETRY OF THE BLACK BODY CONFIGURATION FACTOR 2. 1 Derivation of the Configuration Factor To evaluate...

  1. Climatology of aerosol optical depth in north?central Oklahoma: 19922008

    SciTech Connect (OSTI)

    Michalsky, Joseph J.; Denn, Frederick; Flynn, Connor J.; Hodges, G. B.; Kiedron, Piotr; Koontz, Annette S.; Schlemmer, James; Schwartz, Stephen E.

    2010-04-13T23:59:59.000Z

    Aerosol optical depth (AOD) has been measured at the Atmospheric Radiation Measurement Program central facility near Lamont, Oklahoma, since the fall of 1992. Most of the data presented are from the multifilter rotating shadowband radiometer, a narrow?band, interference?filter Sun radiometer with five aerosol bands in the visible and near infrared; however, AOD measurements have been made simultaneously and routinely at the site by as many as three different types of instruments, including two pointing Sun radiometers. Scatterplots indicate high correlations and small biases consistent with earlier comparisons. The early part of this 16 year record had a disturbed stratosphere with residual Mt. Pinatubo aerosols, followed by the cleanest stratosphere in decades. As such, the last 13 years of the record reflect changes that have occurred predominantly in the troposphere. The field calibration technique is briefly described and compared to Langley calibrations from Mauna Loa Observatory. A modified cloudscreening technique is introduced that increases the number of daily averaged AODs retrieved annually to about 250 days compared with 175 days when a more conservative method was employed in earlier studies. AODs are calculated when the air mass is less than six; that is, when the Suns elevation is greater than 9.25. The more inclusive cloud screen and the use of most of the daylight hours yield a data set that can be used to more faithfully represent the true aerosol climate for this site. The diurnal aerosol cycle is examined month?by?month to assess the effects of an aerosol climatology on the basis of infrequent sampling such as that from satellites.

  2. United States hurricane landfalls and damages: Can one-to five-year predictions beat climatology?

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    United States hurricane landfalls and damages: Can one-to five-year predictions beat climatology-year predictions of United States hurricane landfalls and damages improve upon a baseline expectation derived from these improvements were due to chance or actual skill. A review of efforts to predict hurricane landfalls and damage

  3. Climatology of katabatic winds in the McMurdo dry valleys, southern Victoria Land, Antarctica

    E-Print Network [OSTI]

    Fountain, Andrew G.

    Climatology of katabatic winds in the McMurdo dry valleys, southern Victoria Land, Antarctica of katabatic winds largely controls winter (June to August) temperatures, increasing 1°C per 1% increase of katabatic winds in the McMurdo dry valleys, southern Victoria Land, Antarctica, J. Geophys. Res., 109, D

  4. An ozone climatology of the Dallas-Fort Worth area and its relationship to meteorology

    E-Print Network [OSTI]

    Nobis, Timothy Edward

    1998-01-01T23:59:59.000Z

    , no extensive studies on ozone in this area have been published. This study presents a broad overview of the ozone problem in the DFW area. An ozone spatial and temporal climatology was constructed using ozone data at 23 different monitoring sites from 1980...

  5. Wind climatology of Schiphol Andrew Stepek, Xueli Wang and Dirk Wolters

    E-Print Network [OSTI]

    Haak, Hein

    Wind climatology of Schiphol Andrew Stepek, Xueli Wang and Dirk Wolters De Bilt, May 2012 #12;2 Contents Summary 2 Introduction 3 Data 3 Hourly wind measurements 3 Yearly averages of wind speed measurements 4 Quality and sources of error 6 Method 7 Trends in wind speed 7 Definition of cross and tail wind

  6. SAR-BASED WIND CLIMATOLOGY FOR WIND TURBINES Merete Bruun Christiansen(1)

    E-Print Network [OSTI]

    SAR-BASED WIND CLIMATOLOGY FOR WIND TURBINES Merete Bruun Christiansen(1) , Charlotte Bay Hasager(1) , Donald Thompson(2) , Lars Boye Hansen(3) (1) Wind Energy Department, Ris National Laboratory, Technical, Denmark ABSTRACT Wind fields extracted from synthetic aperture radar (SAR) imagery are used to analyze

  7. An empirical framework for tropical cyclone climatology Nam-Young Kang James B. Elsner

    E-Print Network [OSTI]

    Elsner, James B.

    on defining activity with indices like the Accumulated Cyclone Energy (ACE) and Power Dissipation Index (PDI used exponent indices like accumulated cyclone energy, it does not contain cyclone duration. EmpiricalAn empirical framework for tropical cyclone climatology Nam-Young Kang · James B. Elsner Received

  8. Improved Great Lakes Ice Cover Climatology Primary Investigator: Raymond Assel -NOAA GLERL (Emeritus)

    E-Print Network [OSTI]

    Improved Great Lakes Ice Cover Climatology Primary Investigator: Raymond Assel - NOAA GLERL (Emeritus) Co-Investigators: Thomas Croley - NOAA GLERL (Emeritus) Overview Ice cover affects mass and energy exchange between the planetary boundary layer and the waters of the Great Lakes. The improved ice

  9. Statistical examination of climatological data relevant to global temperature variation. Final report

    SciTech Connect (OSTI)

    Gray, H.L.; Gunst, R.F.; Woodward, W.A.

    1998-07-01T23:59:59.000Z

    Advanced statistical procedures have been developed to analyze and model climatological data. Research has focused on the following areas: testing the global temperature series for trend; the effect of initial conditions on autoregressive models for global temperature data; long memory modeling of the carbon dioxide data; and spatial modeling of global temperature data.

  10. A Climatology of Midlatitude Mesoscale Convective Vortices in the Rapid Update Cycle

    E-Print Network [OSTI]

    Johnson, Richard H.

    A Climatology of Midlatitude Mesoscale Convective Vortices in the Rapid Update Cycle ERIC P. JAMES of mesoscale convective vortices (MCVs) occurring in the state of Oklahoma during the late spring and summer, true MCVs represent only about 20% of the mesoscale relative vorticity maxima detected by the algorithm

  11. Impacts of a New Solar Radiation Parameterization on the CPTEC AGCM Climatological Features

    E-Print Network [OSTI]

    Barbosa, Henrique

    Impacts of a New Solar Radiation Parameterization on the CPTEC AGCM Climatological Features H. M. J with a new solar radiation scheme are used. There is an 8% increase in the annual mean global average atmo%), which were not considered in the operational solar radiation scheme. Under clear-sky conditions

  12. Mesoscale Simulation of Tropical Cyclones in the South Pacific: Climatology and Interannual Variability

    E-Print Network [OSTI]

    Mesoscale Simulation of Tropical Cyclones in the South Pacific: Climatology and Interannual is shown to reproduce a wide range of mesoscale convective systems. Tropical cyclones grow from the most related to mesoscale in- teractions, which also affect TC tracks and the resulting occurrence. 1

  13. A 10-year radar-based climatology of rainfall Aart Overeem, Iwan Holleman, Adri Buishand

    E-Print Network [OSTI]

    Stoffelen, Ad

    the derivation of a 10- year radar-based precipitation climatology for the Netherlands. Using rain gauges of the radar-based accumulations with an independent gauge network confirms the quality of the data set. Finally, the radar data are used to obtain exceedance probabilities and maximum rainfall depths. II. RADAR

  14. Internship Contract (Includes Practicum)

    E-Print Network [OSTI]

    Thaxton, Christopher S.

    Internship Contract (Includes Practicum) Student's name-mail: _________________________________________ Internship Agency Contact Agency Name: ____________________________________ Address-mail: __________________________________________ Location of Internship, if different from Agency: ________________________________________________ Copies

  15. AUTONOMIC MULTIMEDIA DELIVERY SERVICES SELF-CONFIGURATION

    E-Print Network [OSTI]

    AUTONOMIC MULTIMEDIA DELIVERY SERVICES SELF-CONFIGURATION I. Al-oqily1 , A. Alshtnawi2 , K.M. Al-configuration architecture for multimedia delivery services. Index Terms-- self-configuration, autonomic computing, overlay

  16. Configuration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting theCommercialization andComputer SimulationsConcentratingAstrophysics -

  17. Living Expenses (includes approximately

    E-Print Network [OSTI]

    Maroncelli, Mark

    & engineering programs All other programs Graduate: MBA/INFSY at Erie & Harrisburg (12 credits) Business Guarantee 3 (Does not include Dependents Costs4 ) Altoona, Berks, Erie, and Harrisburg 12-Month Estimated

  18. CRAD, Configuration Management Assessment Plan

    Broader source: Energy.gov [DOE]

    The objective of this assessment is to determine whether a Configuration Management Program (CM) is in place which allows for the availability and retrievability of accurate information, improves response to design and operational decisions, enhances worker safety, increases facility safety and reliability, increases efficiency of work efforts, and helps maintain integrity of interfacing orders.

  19. Discretized configurations and partial partitions

    E-Print Network [OSTI]

    Abrams, Aaron; Hower, Valerie

    2010-01-01T23:59:59.000Z

    We show that the discretized configuration space of $k$ points in the $n$-simplex is homotopy equivalent to a wedge of spheres of dimension $n-k+1$. This space is homeomorphic to the order complex of the poset of ordered partial partitions of $\\{1,\\...,n+1\\}$ with exactly $k$ parts. We also compute the Euler characteristic in two different ways, thereby obtaining a topological proof of a combinatorial recurrence satisfied by the Stirling numbers of the second kind.

  20. 2006 Nature Publishing Group A climatologically significant aerosol longwave

    E-Print Network [OSTI]

    reinforcements including icealbedo and cloudradiation feedbacks6 . The importance of cloudradiation (refs 7, 8). These studies have established that clouds, via the dominance of longwave radiation, exert clouds, in a process known as the `first indirect' effect11,12 . Under frequently occurring cloud types

  1. Dimensional regularization in configuration space

    SciTech Connect (OSTI)

    Bollini, C.G. [Facultad de Ciencias Exactas de La Universidad de La Plata, Departamento de Fisica, C.C. 67 La Plata (Argentina)] [Facultad de Ciencias Exactas de La Universidad de La Plata, Departamento de Fisica, C.C. 67 La Plata (Argentina); [Comision de Investigaciones Cientificas de La Provincia de Buenos Aires, Buenos Aires (Argentina); Giambiagi, J.J. [Centro Brasileiro de Pesquisas Fisicas--CBPF, Rua Dr. Xavier Sigaud, 150, 22.290-180 Rio de Janeiro RJ, (Brasil)] [Centro Brasileiro de Pesquisas Fisicas--CBPF, Rua Dr. Xavier Sigaud, 150, 22.290-180 Rio de Janeiro RJ, (Brasil)

    1996-05-01T23:59:59.000Z

    Dimensional regularization is introduced in configuration space by Fourier transforming in {nu} dimensions the perturbative momentum space Green functions. For this transformation, the Bochner theorem is used; no extra parameters, such as those of Feynman or Bogoliubov and Shirkov, are needed for convolutions. The regularized causal functions in {ital x} space have {nu}-dependent moderated singularities at the origin. They can be multiplied together and Fourier transformed (Bochner) without divergence problems. The usual ultraviolet divergences appear as poles of the resultant analytic functions of {nu}. Several examples are discussed. {copyright} {ital 1996 The American Physical Society.}

  2. Multiple forearm robotic elbow configuration

    DOE Patents [OSTI]

    Fisher, John J. (Wilmington, DE)

    1990-01-01T23:59:59.000Z

    A dual forearmed robotic elbow configuration comprises a main arm having a double elbow from which two coplanar forearms depend, two actuators carried in the double elbow for moving the forearms, and separate, independent end effectors, operated by a cable carried from the main arm through the elbow, is attached to the distal end of each forearm. Coiling the cables around the actuators prevents bending or kinking when the forearms are rotated 360 degrees. The end effectors can have similar or different capabilities. Actuator cannisters within the dual elbow are modular for rapid replacement or maintenance. Coarse and fine resolver transducers within the actuators provide accurate position referencing information.

  3. Alternative configurations for the waste-handling building at the Yucca Mountain Repository

    SciTech Connect (OSTI)

    NONE

    1990-08-01T23:59:59.000Z

    Two alternative configurations of the waste-handling building have been developed for the proposed nuclear waste repository in tuff at Yucca Mountain, Nevada. One configuration is based on criteria and assumptions used in Case 2 (no monitored retrievable storage facility, no consolidation), and the other configuration is based on criteria and assumptions used in Case 5 (consolidation at the monitored retrievable storage facility) of the Monitored Retrievable Storage System Study for the Repository. Desirable waste-handling design concepts have been selected and are included in these configurations. For each configuration, general arrangement drawings, plot plans, block flow diagrams, and timeline diagrams are prepared.

  4. Configurational diffusion of coal macromolecules

    SciTech Connect (OSTI)

    Guin, J.A.; Curtis, C.W.; Tarrer, A.R.; Kim, S.; Hwang, D.; Chen, C.C.; Chiou, Z.

    1991-01-01T23:59:59.000Z

    The objective of our research was to obtain fundamental information regarding the functional dependence of the diffusion coefficient of coal molecules on the ratio of molecule to pore diameter. That is, the objective of our study was to examine the effect of molecule size and configuration on hindered diffusion of coal macromolecules through as porous medium. To best accomplish this task, we circumvented the complexities of an actual porous catalyst by using a well defined porous matrix with uniform capillaric pores, i.e., a track-etched membrane. In this way, useful information was obtained regarding the relationship of molecular size and configuration on the diffusion rate of coal derived macromolecules through a pore structure with known geometry. Similar studies were performed using a pellet formed of porous alumina, to provide a link between the idealized membranes and the actual complex pore structure of real catalyst extrudates. The fundamental information from our study will be useful toward the tailoring of catalysts to minimize diffusional influences and thereby increase coal conversion and selectivity for desirable products. (VC)

  5. DEVELOPMENT OF OPTIMUM DESIGN CONFIGURATION AND

    E-Print Network [OSTI]

    DEVELOPMENT OF OPTIMUM DESIGN CONFIGURATION AND PERFORMANCE FOR VERTICAL AXIS WIND TURBINE Prepared DESIGN CONFIGURATION AND PERFORMANCE FOR VERTICAL AXIS WIND TURBINE EISG AWARDEE Mechanical and Aerospace://www.energy.ca.gov/research/index.html. #12;Page 1 Development Of Optimum Design Configuration And Performance For Vertical Axis Wind Turbine

  6. Configure Outlook 2010 with Exchange Server

    E-Print Network [OSTI]

    Qiu, Weigang

    Configure Outlook 2010 with Exchange Server #12;1. Navigate to the Windows Start Menu (or press. #12;14. E-mail server settings will now auto configure. 15. Once the Auto Account Setup is configured server settings or additional server types. 3. Click the Next > button. #12;4. Select Microsoft Exchange

  7. Vehicle drive module having improved cooling configuration

    DOE Patents [OSTI]

    Radosevich, Lawrence D.; Meyer, Andreas A.; Kannenberg, Daniel G.; Kaishian, Steven C.; Beihoff, Bruce C.

    2007-02-13T23:59:59.000Z

    An electric vehicle drive includes a thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. Power electronic circuits are thermally matched, such as between component layers and between the circuits and the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  8. Operation and Configuration of a Storage Portfolio via Convex Optimization

    E-Print Network [OSTI]

    is equally broad, and includes pumped hydro, compressed air energy storage (CAES), battery energy storage sys type and size of battery is sub- sequently picked as the (single device) storage portfolio. HoweverOperation and Configuration of a Storage Portfolio via Convex Optimization Matt Kraning, Yang Wang

  9. Apparatus configured for identification of a material and method of identifying a material

    DOE Patents [OSTI]

    Slater, John M. (Idaho Falls, ID); Crawford, Thomas M. (Idaho Falls, ID); Frickey, Dean A. (Idaho Falls, ID)

    2001-01-01T23:59:59.000Z

    The present invention relates to an apparatus configured for identification of a material and method of identifying a material. One embodiment of the present invention provides an apparatus configured for identification of a material including a first region configured to receive a first sample and output a first spectrum responsive to exposure of the first sample to radiation; a signal generator configured to provide a reference signal having a reference frequency and a modulation signal having a modulation frequency; a modulator configured to selectively modulate the first spectrum using the modulation signal according to the reference frequency; a second region configured to receive a second sample and output a second spectrum responsive to exposure of the second sample to the first spectrum; and a detector configured to detect the second spectrum.

  10. A climatology of tropical moisture bursts in the eastern North Pacific Ocean

    E-Print Network [OSTI]

    Smith, Neil Ray

    1986-01-01T23:59:59.000Z

    A CLIil'IATOLOGY OF TROFICAL MOISTURE BURSTS IN THF. EASTERN NORTH PACIFIC OCEAN A Theseus NEIL R A Y SMITH Submitted to the Graduate College of' Texas AKIil University in partial fulfil)nient of the requirements I'o. the degree of MASTER... OF SCIENCE December 1986 M;i;iir Subject: Meteorology A CLIMATOLOGY OF TROPICAL MOISTURE BURSTS IN THE EASTERN NORTH PACIFIC OCEAN A Thesis NEIL RAY SMITH Approved as to style and content by: James P. McE uirk (Co-Chairman) ylmer H, Thompson (Co...

  11. Metrics for measuring distances in configuration spaces

    SciTech Connect (OSTI)

    Sadeghi, Ali, E-mail: ali.sadeghi@unibas.ch; Ghasemi, S. Alireza; Schaefer, Bastian; Mohr, Stephan; Goedecker, Stefan [Department of Physics, Universitt Basel, Klingelbergstr. 82, 4056 Basel (Switzerland)] [Department of Physics, Universitt Basel, Klingelbergstr. 82, 4056 Basel (Switzerland); Lill, Markus A. [Department of Medicinal Chemistry and Molecular Pharmacology, College of Pharmacy, Purdue University, 575 Stadium Mall Drive, West Lafayette, Indiana 47907 (United States)] [Department of Medicinal Chemistry and Molecular Pharmacology, College of Pharmacy, Purdue University, 575 Stadium Mall Drive, West Lafayette, Indiana 47907 (United States)

    2013-11-14T23:59:59.000Z

    In order to characterize molecular structures we introduce configurational fingerprint vectors which are counterparts of quantities used experimentally to identify structures. The Euclidean distance between the configurational fingerprint vectors satisfies the properties of a metric and can therefore safely be used to measure dissimilarities between configurations in the high dimensional configuration space. In particular we show that these metrics are a perfect and computationally cheap replacement for the root-mean-square distance (RMSD) when one has to decide whether two noise contaminated configurations are identical or not. We introduce a Monte Carlo approach to obtain the global minimum of the RMSD between configurations, which is obtained from a global minimization over all translations, rotations, and permutations of atomic indices.

  12. V-036: EMC Smarts Network Configuration Manager Database Authenticatio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    36: EMC Smarts Network Configuration Manager Database Authentication Bypass Vulnerability V-036: EMC Smarts Network Configuration Manager Database Authentication Bypass...

  13. Climatology, Variability and Extrema of Ocean Waves -The Web-based KNMI/ERA-40 Wave Atlas

    E-Print Network [OSTI]

    Haak, Hein

    the main features of the atlas. The atlas contains some explanatory text, a basic description of the wind book of Hogben et al. (1986) and the Atlas of the ocean wind and wave climate of Young and HollandClimatology, Variability and Extrema of Ocean Waves - The Web-based KNMI/ERA-40 Wave Atlas Andreas

  14. COMPARISON OF WIND AND WIND SHEAR CLIMATOLOGIES DERIVED FROM HIGH-RESOLUTION RADIOSONDES AND THE ECMWF MODEL

    E-Print Network [OSTI]

    Stoffelen, Ad

    COMPARISON OF WIND AND WIND SHEAR CLIMATOLOGIES DERIVED FROM HIGH-RESOLUTION RADIOSONDES wind and its vertical gradient, i.e. wind-shear, is characterized as a function of climate region. For a better representation of the average atmospheric wind and shear and their variabilities, high

  15. Climatology Models for Extreme Hurricane Winds near the United States THOMAS H. JAGGER AND JAMES B. ELSNER

    E-Print Network [OSTI]

    Elsner, James B.

    that from earth- quakes. In Florida alone Hurricane Andrew's strike in 1992 caused more than $30 billionClimatology Models for Extreme Hurricane Winds near the United States THOMAS H. JAGGER AND JAMES B 12 August 2005, in final form 13 December 2005) ABSTRACT The rarity of severe coastal hurricanes

  16. Tip Jets and Barrier Winds: A QuikSCAT Climatology of High Wind Speed Events around Greenland

    E-Print Network [OSTI]

    Renfrew, Ian

    of Environmental Sciences, University of East Anglia, Norwich, United Kingdom (Manuscript received 28 September meteorological, oceanographic, cli- matological, and wind energy applications. Strong sur- face winds overTip Jets and Barrier Winds: A QuikSCAT Climatology of High Wind Speed Events around Greenland G. W

  17. a0005 Clouds: Climatology S Warren and R Eastman, Department of Atmospheric Sciences, University of Washington, Seattle, WA 98195, USA

    E-Print Network [OSTI]

    Warren, Stephen

    of the underlying surface, the season, and the time of day. The effect of clouds on the Earth's radiation budget, called the `cloud radiative effect', is generally negative in the daytime but positive at night (i thermal infrared radiation emitted from below, and they produce rain and snow. A cloud climatology

  18. Cloud climatology at the Southern Great Plains and the layer structure, drizzle, and atmospheric modes of continental stratus

    E-Print Network [OSTI]

    of cloud layers, an issue that is important in calculating both the radiative and the hydro- logic effects.5 years) cloud observations from the Atmospheric Radiation Measurements (ARM) program Southern Great in Global Climate Models (GCMs) remains a source of uncertainty in climate simulations. Cloud climatologies

  19. On Dual Configurational Forces SHAOFAN LIj

    E-Print Network [OSTI]

    Li, Shaofan

    they provide the dual energymomentum tensor. Some previously unknown and yet interesting results in elasticity the configuration force (energymomentum tensor) P and the dual configuration force (dual energymomentum tensor) L energy momentum tensor (referred to as the dual energymomentum tensor in this j Corresponding author

  20. Evolution of the Configuration Database Design

    SciTech Connect (OSTI)

    Salnikov, A

    2006-04-19T23:59:59.000Z

    The BABAR experiment at SLAC successfully collects physics data since 1999. One of the major parts of its on-line system is the configuration database which provides other parts of the system with the configuration data necessary for data taking. Originally the configuration database was implemented in the Objectivity/DB ODBMS. Recently BABAR performed a successful migration of its event store from Objectivity/DB to ROOT and this prompted a complete phase-out of the Objectivity/DB in all other BABAR databases. It required the complete redesign of the configuration database to hide any implementation details and to support multiple storage technologies. In this paper we describe the process of the migration of the configuration database, its new design, implementation strategy and details.

  1. Electrostatic generator/motor configurations

    DOE Patents [OSTI]

    Post, Richard Freeman

    2012-09-11T23:59:59.000Z

    Electrostatic generators/motors designs are provided that include a stator fixedly connected to a first central support centered about a central axis. The stator elements are attached to the first central support. Similarly, a second stator is connected to a central support centered about the central axis, and the second stator has stator elements attached to the second central support. A rotor is located between the first stator and the second stator and includes an outer support, where the rotor is rotatably centered about the central axis, the rotor having elements in contact with the outer support, each rotor element having an extending rotor portion that extends radially from the outer support toward the axis of rotation.

  2. Electrostatic generator/motor configurations

    DOE Patents [OSTI]

    Post, Richard F

    2014-02-04T23:59:59.000Z

    Electrostatic generators/motors designs are provided that generally may include a first cylindrical stator centered about a longitudinal axis; a second cylindrical stator centered about the axis, a first cylindrical rotor centered about the axis and located between the first cylindrical stator and the second cylindrical stator. The first cylindrical stator, the second cylindrical stator and the first cylindrical rotor may be concentrically aligned. A magnetic field having field lines about parallel with the longitudinal axis is provided.

  3. SAPHIRE 8 Software Configuration Management Plan

    SciTech Connect (OSTI)

    Curtis Smith

    2010-01-01T23:59:59.000Z

    The INL software developers use version control for both the formally released SAPHIRE versions, as well as for source code. For each formal release of the software, the developers perform an acceptance test: the software must pass a suite of automated tests prior to official release. Each official release of SAPHIRE is assigned a unique version identifier. The release is bundled into a standard installation package for easy and consistent set-up by individual users. Included in the release is a list of bug fixes and new features for the current release, as well as a history of those items for past releases. Each formal release of SAPHIRE will have passed an acceptance test. In addition to assignment of a unique version identifier for an official software release, each source code file is kept in a controlled library. Source code is a collection of all the computer instructions written by developers to create the finished product. The library is kept on a server, where back-ups are regularly made. This document describes the configuration management approach used as part of the SAPHIRE development.

  4. Evaluation Of Saltstone Mixer Paddle Configuration For Improved Wear Resistance

    SciTech Connect (OSTI)

    Reigel, M. M.; Fowley, M. D.; Pickenheim, B. R.

    2012-09-27T23:59:59.000Z

    A soft metal with low wear resistance (6000 series aluminum), was used to minimize run time while maximizing wear rate. Two paddle configurations were tested, with the first four paddles after the augers replaced by the wear paddles. The first configuration was all flat paddles, with the first paddle not aligned with the augers and is consistent with present SPF mixer. The second configuration had helical paddles for the first three stages after the augers and a flat paddle at the fourth stage. The first helical paddle was aligned with the auger flight for the second configuration. The all flat paddle configuration wear rate was approximately double the wear rate of the helical paddles for the first two sets of paddles after the augers. For both configurations, there was little or no wear on the third and fourth paddle sets based on mass change, indicating that the fully wetted premix materials are much less abrasive than the un-wetted or partially wetted premix. Additionally, inspection of the wear surface of the paddles at higher magnification showed the flat paddles were worn much more than the helical and is consistent with the wear rates. Aligning the auger discharge flight with the first set of helical paddles was effective in reducing the wear rate as compared to the flat paddle configuration. Changing the paddle configuration from flat to helical resulted in a slight increase in rheological properties. Although, both tests produced grout-like material that is within the processing rage of the SPF, it should be noted that cement is not included in the premix and water was used rather than salt solution, which does affect the rheology of the fresh grout. The higher rheological properties from the helical wear test are most likely due to the reduced number of shearing paddles in the mixer. In addition, there is variation in the rheological data for each wear test. This is most likely due to the way that the dry feeds enter the mixer from the dry feeder. The premix is discharged from the hopper in an unsteady fashion, where irregular sized clumps were observed leaving the discharge of the auger, though the auger speed is constant.

  5. Hybrid powertrain system including smooth shifting automated transmission

    DOE Patents [OSTI]

    Beaty, Kevin D.; Nellums, Richard A.

    2006-10-24T23:59:59.000Z

    A powertrain system is provided that includes a prime mover and a change-gear transmission having an input, at least two gear ratios, and an output. The powertrain system also includes a power shunt configured to route power applied to the transmission by one of the input and the output to the other one of the input and the output. A transmission system and a method for facilitating shifting of a transmission system are also provided.

  6. A configuration system for Siemens Airlink

    E-Print Network [OSTI]

    A configuration system for Siemens Airlink Søren Løvborg Abstract Siemens Airlink is a railway for context-free grammars . . . . . . . . 41 4.7 Parse tree transforms

  7. TWRS systems engineering software configuration management plan

    SciTech Connect (OSTI)

    Porter, P.E.

    1996-10-09T23:59:59.000Z

    This plan delineates the requirements for control of software developed and supported by the Tank Waste Remediation System (TWRS) Technical Integration organization. The information contained in this plan shall assist employees involved with software modification and configuration control.

  8. On Some Results Related to Napoleon's Configurations

    E-Print Network [OSTI]

    Nikolay Dimitrov

    2010-05-10T23:59:59.000Z

    The goal of this paper is to give a purely geometric proof of a theorem by Branko Gr\\"unbaum concerning configuration of triangles coming from the classical Napoleon's theorem in planar Euclidean geometry.

  9. On Some Results Related to Napoleon's Configurations

    E-Print Network [OSTI]

    Dimitrov, Nikolay

    2010-01-01T23:59:59.000Z

    The goal of this paper is to give a purely geometric proof of a theorem by Branko Gr\\"unbaum concerning configuration of triangles coming from the classical Napoleon's theorem in planar Euclidean geometry.

  10. Process Synthesis and Optimization of Biorefinery Configurations

    E-Print Network [OSTI]

    Pham, Viet

    2012-10-19T23:59:59.000Z

    of conceptual biorefinery pathways from given feedstocks and products, (2) screening of the synthesized pathways to identify the most economic pathways, (3) development of a flexible biorefinery configuration, and (4) techno-economic analysis of a detailed...

  11. Role of anisotropy configuration in exchange-biased systems.

    SciTech Connect (OSTI)

    Jimenez, E.; Camarero, J.; Perna, P.; Mikuszeit, N.; Teran, F. J.; Sort, J.; Nogues, J.; Garcia-Martin, J. M.; Hoffmann, A.; Dieny, B.; Miranda, R. (Materials Science Division); (Univ. Autonoma de Madrid); (Univ. Autonoma de Barcelona); (SPINTEC); (Inst. de Microelectronica de Madrid)

    2011-01-01T23:59:59.000Z

    We present a systematic study of the anisotropy configuration effects on the magnetic properties of exchange-biased ferromagnetic/antiferromagnetic (FM/AFM) Co/IrMn bilayers. The interfacial unidirectional anisotropy is set extrinsically via a field cooling procedure with the magnetic field misaligned by an angle {beta}{sub FC} with respect to the intrinsic FM uniaxial anisotropy. High resolution angular dependence in-plane resolved Kerr magnetometry measurements have been performed for three different anisotropy arrangements, including collinear {beta}{sub FC} = 0 and two opposite noncollinear cases. The symmetry breaking of the induced noncollinear configurations results in a peculiar nonsymmetric magnetic behavior of the angular dependence of magnetization reversal, coercivity, and exchange bias. The experimental results are well reproduced without any fitting parameter by using a simple model including the induced anisotropy configuration. Our finding highlights the importance of the relative angle between anisotropies in order to properly account for the magnetic properties of exchange-biased FM/AFM systems.

  12. ORNL/CDIAC-160 Climatological Distributions of pH, pCO2, Total CO2, Alkalinity,

    E-Print Network [OSTI]

    ORNL/CDIAC-160 NDP-094 Climatological Distributions of pH, pCO2, Total CO2, Alkalinity, and CaCO3, Alkalinity, and CaCO3 Saturation in the Global Surface Ocean. ORNL/CDIAC-160, NDP-094. Carbon Dioxide, total CO2 concentration (TCO2), and the degree of CaCO3 saturation for the global surface ocean waters

  13. Tank Waste Remediation Systems (TWRS) Configuration Management Implementation Plan

    SciTech Connect (OSTI)

    WEIR, W.R.

    2000-12-18T23:59:59.000Z

    The Tank Waste Configuration Management (TWRS) Configuration Management Implementation Plan descibes the execution of the configuration management (CM) that the contractor uses to manage and integrate its programmatic and functional operations to perform work.

  14. V-120: EMC Smarts Network Configuration Manager Java RMI Access...

    Broader source: Energy.gov (indexed) [DOE]

    0: EMC Smarts Network Configuration Manager Java RMI Access Control Flaw Lets Remote Users Gain Full Control V-120: EMC Smarts Network Configuration Manager Java RMI Access Control...

  15. Configuration Interactions Constrained by Energy Density Functionals

    E-Print Network [OSTI]

    B. Alex Brown; Angelo Signoracci; Morten Hjorth-Jensen

    2010-09-24T23:59:59.000Z

    A new method for constructing a Hamiltonian for configuration interaction calculations with constraints to energies of spherical configurations obtained with energy-density-functional (EDF) methods is presented. This results in a unified model that reproduced the EDF binding-energy in the limit of single-Slater determinants, but can also be used for obtaining energy spectra and correlation energies with renormalized nucleon-nucleon interactions. The three-body and/or density-dependent terms that are necessary for good nuclear saturation properties are contained in the EDF. Applications to binding energies and spectra of nuclei in the region above 208Pb are given.

  16. Comparison of E and D configuration sensitivity when D configuration is tapered.

    E-Print Network [OSTI]

    Groppi, Christopher

    by the distribution of the array's baselines. SNRE SNRD = BWE BWD NOISED NOISEE (1) The noise is inversely-configuration is 9 times better than sensitivity of D configuration (because SNRE SNRD = BWE BWD = D2 sizeD D2 size

  17. Comparison of E and D configuration sensitivity when D configuration is tapered.

    E-Print Network [OSTI]

    Groppi, Christopher

    by the distribution of the array's baselines. SNRE SNRD = BWE BWD NOISED NOISEE (1) The noise is inverselyconfiguration is # 9 times better than sensitivity of D configuration (because SNRE SNRD = BWE BWD = D 2 sizeD D 2 size

  18. Rayleigh LIDAR and satellite (HALOE, SABER, CHAMP and COSMIC) measurements of stratosphere-mesosphere temperature over a southern sub-tropical site, Reunion (20.8 S; 55.5 E): climatology and comparison study

    E-Print Network [OSTI]

    Sivakumar, V.; Vishnu Prasanth, P.; Kishore, P.; Bencherif, H.; Keckhut, P.

    2011-01-01T23:59:59.000Z

    climatology of the mid- dle atmosphere from long-termLIDAR measurements at mid- dle and low latitudes, J.Over the southern tropics, mid- dle atmosphere temperature

  19. Countries Gasoline Prices Including Taxes

    Gasoline and Diesel Fuel Update (EIA)

    Selected Countries (U.S. dollars per gallon, including taxes) Date Belgium France Germany Italy Netherlands UK US 51115 6.15 6.08 6.28 6.83 6.96 6.75 3.06 5415 6.14 6.06...

  20. Sponsorship includes: Agriculture in the

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    Sponsorship includes: · Agriculture in the Classroom · Douglas County Farm Bureau · Gifford Farm · University of Nebraska Agricultural Research and Development Center · University of Nebraska- Lincoln Awareness Coalition is to help youth, primarily from urban communities, become aware of agriculture

  1. OPTIMIZING THE OVERALL CONFIGURATION OF A HE-

    E-Print Network [OSTI]

    Raffray, A. Ren

    1 OPTIMIZING THE OVERALL CONFIGURATION OF A HE- COOLED W-ALLOY DIVERTOR FOR A POWER PLANT A. R. Raffray, S. Malang and X. Wang Mechanical and Aerospace Engineering Department and Center for Energy at the 25th Symposium on Fusion Technology Rostock, Germany September 15-19, 2008 #12;2 He-cooled W-Alloy

  2. Video Mining with Frequent Itemset Configurations

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Video Mining with Frequent Itemset Configurations Till Quack1 , Vittorio Ferrari2 , and Luc Van Gool1 1 ETH Zurich 2 LEAR - INRIA Grenoble Abstract. We present a method for mining frequently arrangements of affine covariant regions. Our mining method is based on the class of frequent itemset mining

  3. ON SOME RESULTS RELATED TO NAPOLEON'S CONFIGURATIONS

    E-Print Network [OSTI]

    Dimitrov, Nikolay

    ON SOME RESULTS RELATED TO NAPOLEON'S CONFIGURATIONS NIKOLAY DIMITROV Abstract. The goal of triangles coming from the classical Napoleon's theorem in planar Euclidean geometry. 1. Introduction to Napoleon's Theorem. They are summarized in Theorem 1. The statements of Theorem 1 appear in [1] where

  4. Computational Analysis of Shrouded Wind Turbine Configurations

    E-Print Network [OSTI]

    Alonso, Juan J.

    Computational Analysis of Shrouded Wind Turbine Configurations Aniket C. Aranake Vinod K. Lakshminarayan Karthik Duraisamy Computational analysis of diuser-augmented turbines is performed using high-dimensional simulations of shrouded wind turbines are performed for selected shroud geometries. The results are compared

  5. Laser systems configured to output a spectrally-consolidated laser beam and related methods

    DOE Patents [OSTI]

    Koplow, Jeffrey P. (San Ramon, CA)

    2012-01-10T23:59:59.000Z

    A laser apparatus includes a plurality of pumps each of which is configured to emit a corresponding pump laser beam having a unique peak wavelength. The laser apparatus includes a spectral beam combiner configured to combine the corresponding pump laser beams into a substantially spatially-coherent pump laser beam having a pump spectrum that includes the unique peak wavelengths, and first and second selectively reflective elements spaced from each other to define a lasing cavity including a lasing medium therein. The lasing medium generates a plurality of gain spectra responsive to absorbing the pump laser beam. Each gain spectrum corresponds to a respective one of the unique peak wavelengths of the substantially spatially-coherent pump laser beam and partially overlaps with all other ones of the gain spectra. The reflective elements are configured to promote emission of a laser beam from the lasing medium with a peak wavelength common to each gain spectrum.

  6. Battery system including batteries that have a plurality of positive terminals and a plurality of negative terminals

    DOE Patents [OSTI]

    Dougherty, Thomas J; Symanski, James S; Kuempers, Joerg A; Miles, Ronald C; Hansen, Scott A; Smith, Nels R; Taghikhani, Majid; Mrotek, Edward N; Andrew, Michael G

    2014-01-21T23:59:59.000Z

    A lithium battery for use in a vehicle includes a container, a plurality of positive terminals extending from a first end of the lithium battery, and a plurality of negative terminals extending from a second end of the lithium battery. The plurality of positive terminals are provided in a first configuration and the plurality of negative terminals are provided in a second configuration, the first configuration differing from the second configuration. A battery system for use in a vehicle may include a plurality of electrically connected lithium cells or batteries.

  7. Logo Sheet for Arizona State University All logo configurations are available in the

    E-Print Network [OSTI]

    Hall, Sharon J.

    Logo Sheet for Arizona State University All logo configurations are available in the following (includes entire logo suite) Zip Archive (includes entire logo suite) The caption below each logo refers to the digital file name. Logo download page: http://www.asu.edu/gsm/downloads_logo.html Email gsm

  8. The Database Driven ATLAS Trigger Configuration System

    E-Print Network [OSTI]

    Martyniuk, Alex; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    This contribution describes the trigger selection configuration system of the ATLAS low- and high-level trigger (HLT) and the upgrades it received in preparation for LHC Run 2. The ATLAS trigger configuration system is responsible for applying the physics selection parameters for the online data taking at both trigger levels and the proper connection of the trigger lines across those levels. Here the low-level trigger consists of the already existing central trigger (CT) and the new Level-1 Topological trigger (L1Topo), which has been added for Run 2. In detail the tasks of the configuration system during the online data taking are Application of the selection criteria, e.g. energy cuts, minimum multiplicities, trigger object correlation, at the three trigger components L1Topo, CT, and HLT On-the-fly, e.g. rate-dependent, generation and application of prescale factors to the CT and HLT to adjust the trigger rates to the data taking conditions, such as falling luminosity or rate spikes in the detector readout ...

  9. Project B610 process control configuration acceptance test procedure

    SciTech Connect (OSTI)

    Silvan, G.R.

    1994-09-20T23:59:59.000Z

    The purpose of this test is to verify the Westinghouse configuration of the MICON A/S Distributed Control System for project B610. The following will be verified: proper assignment and operation of all field inputs to and outputs from the MICON Termination panels; proper operation of all display data on the operator`s console; proper operation of all required alarms; and proper operation of all required interlocks. The MICON A/S control system is configured to replace all the control, indication, and alarm panels now located in the Power Control Room. Nine systems are covered by this control configuration, 2736-ZB HVAC, 234-5Z HVAC, Process Vacuum, Dry Air, 291-Z Closed Loop Cooling, Building Accelerometer, Evacuation Siren, Stack CAMs, and Fire. The 2736-ZB HVAC system consists of the ventilation controls for 2736-ZB and 2736-Z as well as alarms for the emergency generators and 232-Z. The 234-5Z HVAC system is the ventilation controls for 235-5Z and 236-Z buildings. Process Vacuum covers the controls for the 26 inch vacuum system. Dry Air covers the controls for the steam and electric air dryers. The 291-Z Closed Loop Cooling system consists of the status indications and alarms for the 291-Z compressor and vacuum pump closed loop cooling system. The rest of closed loop cooling was tested earlier. The Building Accelerometer system consists of the status indications for the two seismic system accelerometers. The Evacuation Siren system includes the controls for the evacuation and take cover sirens. Stack CAMs cover the alarms for the various building ventilation stack continuous air monitors. Finally, the Fire system covers the various fire alarms now located in Room 321-A.

  10. Electrostatic spherically symmetric configurations in gravitating nonlinear electrodynamics

    SciTech Connect (OSTI)

    Diaz-Alonso, J.; Rubiera-Garcia, D. [LUTH, Observatoire de Paris, CNRS, , USAUniversite Paris Diderot, 5 Place Jules Janssen, 92190 Meudon (France) and Departamento de Fisica, Universidad de Oviedo, Avda. Calvo Sotelo 18, E-33007 Oviedo, Asturias (Spain)

    2010-03-15T23:59:59.000Z

    We perform a study of the gravitating electrostatic spherically symmetric (G-ESS) solutions of Einstein field equations minimally coupled to generalized nonlinear Abelian gauge models in three space dimensions. These models are defined by Lagrangian densities which are general functions of the gauge field invariants, restricted by some physical conditions of admissibility. They include the class of nonlinear electrodynamics supporting electrostatic spherically symmetric (ESS) nontopological soliton solutions in absence of gravity. We establish that the qualitative structure of the G-ESS solutions of admissible models is fully characterized by the asymptotic and central-field behaviors of their ESS solutions in flat space (or, equivalently, by the behavior of the Lagrangian densities in vacuum and on the point of the boundary of their domain of definition, where the second gauge invariant vanishes). The structure of these G-ESS configurations for admissible models supporting divergent-energy ESS solutions in flat space is qualitatively the same as in the Reissner-Nordstroem case. In contrast, the G-ESS configurations of the models supporting finite-energy ESS solutions in flat space exhibit new qualitative features, which are discussed in terms of the Arnowitt-Deser-Misner mass, the charge, and the soliton energy. Most of the results concerning well-known models, such as the electrodynamics of Maxwell, Born-Infeld, and the Euler-Heisenberg effective Lagrangian of QED, minimally coupled to gravitation, are shown to be corollaries of general statements of this analysis.

  11. Rigid-rotor, field-reversed configuration

    SciTech Connect (OSTI)

    Conti, F., E-mail: conti@df.unipi.it; Giammanco, F. [Physics Department E. Fermi, University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy) [Physics Department E. Fermi, University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Plasma Diagnostics and Technologies Ltd., Via Giuntini 63, 56023 Navacchio (PI) (Italy); Wessel, F. J.; Binderbauer, M. W.; Bolte, N.; Morehouse, M.; Qerushi, A.; Rahman, H. U.; Roche, T.; Slepchenkov, M. [Tri Alpha Energy, Inc., P.O. Box 7010, Rancho Santa Margarita, California 92688 (United States)] [Tri Alpha Energy, Inc., P.O. Box 7010, Rancho Santa Margarita, California 92688 (United States)

    2014-02-15T23:59:59.000Z

    The radial profiles, n(r), B{sub z}(r), and E{sub r}(r), for a Flux-Coil (inductively driven), Field-Reversed Configuration (FC-FRC) are measured and compared to the predictions of the Rigid-Rotor Model (RRM), which is an analytic, one-dimensional, time-independent, equilibrium description for the FRC. Injectors mounted on both ends of the confinement vessel provide a pre-fill plasma. Coaxial coils mounted outside the vacuum boundaries of the annular-confinement vessel accelerate the plasma and produce the FRC. The density profile is measured by laser interferometry, the magnetic-field profile using an in-situ probe array, and the electric-field profile using an in-situ, floating-probe array. Free parameters for each profile are measured, which also allow other intrinsic-plasma parameters to be determined, using computer-fit algorithms: null radius, radial thickness, plasma temperature, rotation frequencies, the latter of which are independently verified by spectroscopy. All radial profiles agree with the RRM predictions, for the experimental configuration, parameter regime, and specified-time interval studied here.

  12. Composite armor, armor system and vehicle including armor system

    DOE Patents [OSTI]

    Chu, Henry S.; Jones, Warren F.; Lacy, Jeffrey M.; Thinnes, Gary L.

    2013-01-01T23:59:59.000Z

    Composite armor panels are disclosed. Each panel comprises a plurality of functional layers comprising at least an outermost layer, an intermediate layer and a base layer. An armor system incorporating armor panels is also disclosed. Armor panels are mounted on carriages movably secured to adjacent rails of a rail system. Each panel may be moved on its associated rail and into partially overlapping relationship with another panel on an adjacent rail for protection against incoming ordnance from various directions. The rail system may be configured as at least a part of a ring, and be disposed about a hatch on a vehicle. Vehicles including an armor system are also disclosed.

  13. Configurable Process Models: Experiences from a Municipality Case Study

    E-Print Network [OSTI]

    van der Aalst, Wil

    Configurable Process Models: Experiences from a Municipality Case Study Florian Gottschalk1 , Teun.larosa@qut.edu.au Abstract. Configurable process models integrate different variants of a business process into a single model. Through configuration users of such models can then combine the variants to derive a process

  14. Mapping the location and configuration of nitrogen in diamond nanoparticles.

    SciTech Connect (OSTI)

    Barnard, A. S.; Sternberg, M.; Center for Nanoscale Materials; Univ. of Oxford

    2007-01-17T23:59:59.000Z

    Understanding how impurities such as nitrogen are included in diamond nanoparticles is expected to be important for use in future nanodevices, such as qubits for quantum computing. Most commercial diamond nanoparticles contain approximately 2-3% nitrogen, but it is difficult to determine experimentally whether it is located within the core or at the surface of the nanoparticles. Presented here are density functional tight-binding simulations examining the configuration and potential energy surface of substitutional nitrogen in diamond nanoparticles, directly comparing results of different sizes, shapes and surface chemistry. The results predict that nitrogen is metastable within the core of both hydrogenated and dehydrogenated particles, but that the binding energy, coordination and preferred location is dependent upon the structure of the nanoparticle as a whole.

  15. Hydro-climatology: Variability and Change (Proceedings of symposium J-H02 held during IUGG2011 in Melbourne, Australia, July 2011) (IAHS Publ. 344, 2011).

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Hydro-climatology: Variability and Change (Proceedings of symposium J-H02 held during IUGG2011 in Melbourne, Australia, July 2011) (IAHS Publ. 344, 2011). Copyright © 2011 IAHS Press 195 How could hydro , L. COLLET2 , S. ARDOIN-BARDIN3 & P. ROUCOU4 1 CNRS, 2 UM2, 3 IRD ­ UMR HydroSciences Montpellier

  16. 13B.7 THE CLIMATOLOGY, CONVECTIVE MODE, AND MESOSCALE ENVIRONMENT OF COOL SEASON SEVERE THUNDERSTORMS IN THE OHIO AND TENNESSEE VALLEYS, 1995-2006

    E-Print Network [OSTI]

    2300, Norman, OK 73072, E-mail: Bryan.Smith@noaa.gov Center hourly mesoanalysis data (Bothwell et al System (GIS). Using these data, we define a tornado day as a 24 hr period beginning at the first reported13B.7 THE CLIMATOLOGY, CONVECTIVE MODE, AND MESOSCALE ENVIRONMENT OF COOL SEASON SEVERE

  17. Generator configuration for solid oxide fuel cells

    DOE Patents [OSTI]

    Reichner, Philip (Plum Boro, PA)

    1989-01-01T23:59:59.000Z

    Disclosed are improvements in a solid oxide fuel cell generator 1 having a multiplicity of electrically connected solid oxide fuel cells 2, where a fuel gas is passed over one side of said cells and an oxygen-containing gas is passed over the other side of said cells resulting in the generation of heat and electricity. The improvements comprise arranging the cells in the configuration of a circle, a spiral, or folded rows within a cylindrical generator, and modifying the flow rate, oxygen concentration, and/or temperature of the oxygen-containing gases that flow to those cells that are at the periphery of the generator relative to those cells that are at the center of the generator. In these ways, a more uniform temperature is obtained throughout the generator.

  18. Equilibrium Configurations of Cantilever under Terminal Loads

    E-Print Network [OSTI]

    Milan Batista

    2013-03-27T23:59:59.000Z

    The paper provides an exact analytical solution for equilibrium configurations of cantilever rod subject to inclined force and torque acting on its free end. The solution is given in terms of Jacobi elliptical functions and illustrated by several numerical examples and several graphical presentations of shapes of deformed cantilever. Possible forms of cantilever underlying elastica are discussed in details and various simple formulas are given for calculation of characteristic dimensions of elastica. For the case when cantilever is subject only to applied force four load conditions are discussed: follower load problem, load determination problem, conservative load problem and rotational load problem. For all the cases the formulas or effective procedure for solution is given.

  19. Photovoltaic power converter system with a controller configured to actively compensate load harmonics

    DOE Patents [OSTI]

    de Rooij, Michael Andrew (Clifton Park, NY); Steigerwald, Robert Louis (Burnt Hills, NY); Delgado, Eladio Clemente (Burnt Hills, NY)

    2008-12-16T23:59:59.000Z

    Photovoltaic power converter system including a controller configured to reduce load harmonics is provided. The system comprises a photovoltaic array and an inverter electrically coupled to the array to generate an output current for energizing a load connected to the inverter and to a mains grid supply voltage. The system further comprises a controller including a first circuit coupled to receive a load current to measure a harmonic current in the load current. The controller includes a second circuit to generate a fundamental reference drawn by the load. The controller further includes a third circuit for combining the measured harmonic current and the fundamental reference to generate a command output signal for generating the output current for energizing the load connected to the inverter. The photovoltaic system may be configured to compensate harmonic currents that may be drawn by the load.

  20. Configuration and technology implications of potential nuclear hydrogen system applications.

    SciTech Connect (OSTI)

    Conzelmann, G.; Petri, M.; Forsberg, C.; Yildiz, B.; ORNL

    2005-11-05T23:59:59.000Z

    Nuclear technologies have important distinctions and potential advantages for large-scale generation of hydrogen for U.S. energy services. Nuclear hydrogen requires no imported fossil fuels, results in lower greenhouse-gas emissions and other pollutants, lends itself to large-scale production, and is sustainable. The technical uncertainties in nuclear hydrogen processes and the reactor technologies needed to enable these processes, as well waste, proliferation, and economic issues must be successfully addressed before nuclear energy can be a major contributor to the nation's energy future. In order to address technical issues in the time frame needed to provide optimized hydrogen production choices, the Nuclear Hydrogen Initiative (NHI) must examine a wide range of new technologies, make the best use of research funding, and make early decisions on which technology options to pursue. For these reasons, it is important that system integration studies be performed to help guide the decisions made in the NHI. In framing the scope of system integration analyses, there is a hierarchy of questions that should be addressed: What hydrogen markets will exist and what are their characteristics? Which markets are most consistent with nuclear hydrogen? What nuclear power and production process configurations are optimal? What requirements are placed on the nuclear hydrogen system? The intent of the NHI system studies is to gain a better understanding of nuclear power's potential role in a hydrogen economy and what hydrogen production technologies show the most promise. This work couples with system studies sponsored by DOE-EE and other agencies that provide a basis for evaluating and selecting future hydrogen production technologies. This assessment includes identifying commercial hydrogen applications and their requirements, comparing the characteristics of nuclear hydrogen systems to those market requirements, evaluating nuclear hydrogen configuration options within a given market, and identifying the key drivers and thresholds for market viability of nuclear hydrogen options.

  1. Oxygen-consuming chlor alkali cell configured to minimize peroxide formation

    DOE Patents [OSTI]

    Chlistunoff, Jerzy B. (Los Alamos, NM); Lipp, Ludwig (Brookfield, CT); Gottesfeld, Shimshon (Niskayuna, NY)

    2006-08-01T23:59:59.000Z

    Oxygen-consuming zero gap chlor-alkali cell was configured to minimize peroxide formation. The cell included an ion-exchange membrane that divided the cell into an anode chamber including an anode and a cathode chamber including an oxygen gas diffusion cathode. The cathode included a single-piece of electrically conducting graphitized carbon cloth. Catalyst and polytetrafluoroethylene were attached to only one side of the cloth. When the cathode was positioned against the cation exchange membrane with the catalyst side away from the membrane, electrolysis of sodium chloride to chlorine and caustic (sodium hydroxide) proceeded with minimal peroxide formation.

  2. Concealed configuration mixing and shape coexistence in the platinum nuclei

    SciTech Connect (OSTI)

    Garcia-Ramos, J. E.; Hellemans, V.; Heyde, K. [Departamento de Fisica Aplicada, Universidad de Huelva, 21071 Huelva (Spain); Universite Libre de Bruxelles, Physique Nucleaire Theorique et Physique Mathematique, CP229, B-1050 Brussels (Belgium); Department of Physics and Astronomy, Ghent University, Proeftuinstraat 86, B-9000 Gent (Belgium)

    2012-10-20T23:59:59.000Z

    The role of configuration mixing in the Pt region is investigated. The nature of the ground state changes smoothly, being spherical around mass A{approx} 174 and A{approx} 192 and deformed around the mid-shell N= 104 region. Interacting Boson Model with configuration mixing calculations are presented for deformations and isotope shifts. The assumption of the existence of two configurations with very different deformation provides a simple framework to explain the observed isotope shifts systematics.

  3. applying product configuration: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    recurrence satisfied by the Stirling numbers of the second kind. Abrams, Aaron; Hower, Valerie 2010-01-01 167 Equilibrium Configurations of Cantilever under Terminal Loads...

  4. axicell configuration final: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    recurrence satisfied by the Stirling numbers of the second kind. Abrams, Aaron; Hower, Valerie 2010-01-01 68 Integrated coverage and connectivity configuration in wireless...

  5. Battery Choices for Different Plug-in HEV Configurations (Presentation)

    SciTech Connect (OSTI)

    Pesaran, A.

    2006-07-12T23:59:59.000Z

    Presents battery choices for different plug-in hybrid electric vehicle (HEV) configurations to reduce cost and to improve performance and life.

  6. Classification of proton configurations of gas hydrate frameworks

    SciTech Connect (OSTI)

    Kirov, M. V., E-mail: kirov@ikz.ru [Siberian Branch of the Russian Academy of Sciences, Institute of the Earth Cryosphere (Russian Federation)

    2010-05-15T23:59:59.000Z

    All molecular configurations differing in the position of hydrogen atoms (protons) in hydrogen bonds and satisfying periodic boundary conditions have been calculated for the unit cells of CS-I, HS-III, and TS-IV gas hydrate frameworks. The configurations obtained are ranged according to the number of stronger trans-configurations of hydrogen-bound molecular pairs and according to the type of spatial symmetry. The configuration symmetry was analyzed taking into account the additional antisymmetry operation, which is related to the change in the direction of all hydrogen bonds. The strong dependence of the framework properties on the specific position of protons in H bonds is established.

  7. achieving optimal configuration: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Automated Synthesis and Optimization of Robot Configurations Computer Technologies and Information Sciences Websites...

  8. Various proposed international battery charger configurations from a safety aspect

    SciTech Connect (OSTI)

    Goodarzi, G.A. [Hughes Power Control, Torrance, CA (United States)

    1994-12-31T23:59:59.000Z

    This paper presents a review of an electric vehicle`s battery charger configuration. The configuration advantage/disadvantage is being considered. The power processing requirements and the communication configuration and standards are being reviewed. EV progress and utilization depends on the charging standard support and guide. Furthermore, the user protection and utility distribution compatibility needs to be comprehensively evaluated. Various configurations have been recommended; however, each recommendation has its unique advantage and shortcoming. Since the EV application is so diverse, the standard/recommendation must provide flexibility for a different EV application while being self-compatible and utility-compatible for a true global mark. 5 refs.

  9. absolute configurational entropies: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    entropy -- which we evaluate with two different methods -- we show that a configurational entropy maximum is observed at a temperature close to that of the diffusivity maximum. Our...

  10. Systems and strippable coatings for decontaminating structures that include porous material

    DOE Patents [OSTI]

    Fox, Robert V. (Idaho Falls, ID); Avci, Recep (Bozeman, MT); Groenewold, Gary S. (Idaho Falls, ID)

    2011-12-06T23:59:59.000Z

    Methods of removing contaminant matter from porous materials include applying a polymer material to a contaminated surface, irradiating the contaminated surface to cause redistribution of contaminant matter, and removing at least a portion of the polymer material from the surface. Systems for decontaminating a contaminated structure comprising porous material include a radiation device configured to emit electromagnetic radiation toward a surface of a structure, and at least one spray device configured to apply a capture material onto the surface of the structure. Polymer materials that can be used in such methods and systems include polyphosphazine-based polymer materials having polyphosphazine backbone segments and side chain groups that include selected functional groups. The selected functional groups may include iminos, oximes, carboxylates, sulfonates, .beta.-diketones, phosphine sulfides, phosphates, phosphites, phosphonates, phosphinates, phosphine oxides, monothio phosphinic acids, and dithio phosphinic acids.

  11. Recombination Ghosts in Littrow Configuration: Implications for Spectrographs Using Volume Phase Holographic Gratings

    E-Print Network [OSTI]

    Eric B. Burgh; Matthew A. Bershady; Kyle B. Westfall; Kenneth H. Nordsieck

    2007-08-02T23:59:59.000Z

    We report the discovery of optical ghosts generated when using Volume Phase Holographic (VPH) gratings in spectrographs employing the Littrow configuration. The ghost is caused by light reflected off the detector surface, recollimated by the camera, recombined by, and reflected from, the grating and reimaged by the camera onto the detector. This recombination can occur in two different ways. We observe this ghost in two spectrographs being developed by the University of Wisconsin - Madison: the Robert Stobie Spectrograph for the Southern African Large Telescope and the Bench Spectrograph for the WIYN 3.5m telescope. The typical ratio of the brightness of the ghost relative to the integrated flux of the spectrum is of order 10^-4, implying a recombination efficiency of the VPH gratings of order 10^-3 or higher, consistent with the output of rigorous coupled wave analysis. Any spectrograph employing VPH gratings, including grisms, in Littrow configuration will suffer from this ghost, though the general effect is not intrinsic to VPH gratings themselves and has been observed in systems with conventional gratings in non-Littrow configurations. We explain the geometric configurations that can result in the ghost as well as a more general prescription for predicting its position and brightness on the detector. We make recommendations for mitigating the ghost effects for spectrographs and gratings currently built. We further suggest design modifications for future VPH gratings to eliminate the problem entirely, including tilted fringes and/or prismatic substrates. We discuss the resultant implications on the spectrograph performance metrics.

  12. A 4-D Climatology (1979-2009) of the Monthly Tropospheric Aerosol Optical Depth Distribution over the Mediterranean Region from a Comparative Evaluation and Blending of Remote Sensing and Model Products

    SciTech Connect (OSTI)

    Nabat, P.; Somot, S.; Mallet, M.; Chiapello, I.; Morcrette, J. -J.; Solmon, F.; Szopa, S.; Dulac, F.; Collins, W.; Ghan, Steven J.; Horowitz, L.; Lamarque, J.-F.; Lee, Y. H.; Naik, Vaishali; Nagashima, T.; Shindell, Drew; Skeie, R. B.

    2013-05-17T23:59:59.000Z

    Since the 1980s several spaceborne sensors have been used to retrieve the aerosol optical depth (AOD) over the Mediterranean region. In parallel, AOD climatologies coming from different numerical model simulations are now also available, permitting to distinguish the contribution of several aerosol types to the total AOD. In this work, we perform a comparative analysis of this unique multiyear database in terms of total AOD and of its apportionment by the five main aerosol types (soil dust, seasalt, sulfate, black and organic carbon). We use 9 different satellite-derived monthly AOD products: NOAA/AVHRR, SeaWiFS (2 products), TERRA/MISR, TERRA/MODIS, AQUA/MODIS, ENVISAT/MERIS, PARASOL/POLDER and MSG/SEVIRI, as well as 3 more historical datasets: NIMBUS7/CZCS, TOMS (onboard NIMBUS7 and Earth- Probe) and METEOSAT/MVIRI. Monthly model datasets include the aerosol climatology from Tegen et al. (1997), the climate-chemistry models LMDz-OR-INCA and RegCM-4, the multi-model mean coming from the ACCMIP exercise, and the reanalyses GEMS and MACC. Ground-based Level- 2 AERONET AOD observations from 47 stations around the basin are used here to evaluate the model and satellite data. The sensor MODIS (on AQUA and TERRA) has the best average AOD scores over this region, showing a relevant spatiotemporal variability and highlighting high dust loads over Northern Africa and the sea (spring and summer), and sulfate aerosols over continental Europe (summer). The comparison also shows limitations of certain datasets (especially MERIS and SeaWiFS standard products). Models reproduce the main patterns of the AOD variability over the basin. The MACC reanalysis is the closest to AERONET data, but appears to underestimate dust over Northern Africa, where RegCM-4 is found closer to MODIS thanks to its interactive scheme for dust emissions. The vertical dimension is also investigated using the CALIOP instrument. This study confirms differences of vertical distribution between dust aerosols showing a large vertical spread, and other continental and marine aerosols which are confined in the boundary layer. From this compilation, we propose a 4-D blended product from model and satellite data, consisting in monthly time series of 3-D aerosol distribution at a 50 km horizontal resolution over the Euro-Mediterranean marine and continental region for the 20032009 period. The product is based on the total AOD from AQUA/MODIS, apportioned into sulfates, black and organic carbon from the MACC reanalysis, and into dust and sea-salt aerosols from RegCM-4 simulations, which are distributed vertically based on CALIOP climatology.We extend the 20032009 reconstruction to the past up to 1979 using the 20032009 average and applying the decreasing trend in sulfate aerosols from LMDz-OR-INCA, whose AOD trends over Europe and the Mediterranean are median among the ACCMIP models. Finally optical properties of the different aerosol types in this region are proposed from Mie calculations so that this reconstruction can be included in regional climate models for aerosol radiative forcing and aerosolclimate studies.

  13. Verification of Network Management System Configurations David L. Cohrs

    E-Print Network [OSTI]

    Miller, Barton P.

    , with the use of simple, ad hoc tools. However in a large network, managing the net- work management system the amount of sharing and coordination possible in configuring the net- work management system. EachVerification of Network Management System Configurations David L. Cohrs (608) 262-6617 dave

  14. Magnetic reconnection configurations and particle acceleration in solar flares

    E-Print Network [OSTI]

    Chen, P. F.

    types of solar flares. Upper panel: two-ribbon flares; Lower panel: compact flares. The color shows space under different magnetic configurations. Key words: solar flares, magnetic reconnection, particleMagnetic reconnection configurations and particle acceleration in solar flares P. F. Chen, W. J

  15. A Configurable Reference Modelling Language1 M. Rosemanna

    E-Print Network [OSTI]

    van der Aalst, Wil

    Systems, Configuration, Event-Driven Process Chains 1 This research project is financially supported by SAP Research. #12;- 2 - 1 Introduction Enterprise Systems (ES) offer business solutions for typical language used in the by far most successful Enterprise System (SAP) with configurable elements. Thus

  16. An Approach to Security Policy Configuration Using Semantic Threat Graphs

    E-Print Network [OSTI]

    Foley, Simon

    An Approach to Security Policy Configuration Using Semantic Threat Graphs Simon N. Foley, in turn, unnecessarily expose the enterprise to known threats. This paper pro- poses a threat management- nomic configuration of security mechanisms. This knowledge is mod- eled in terms of Semantic Threat

  17. Distributed Computing for Plug-and-Play Network Service Configuration

    E-Print Network [OSTI]

    White, Tony

    Distributed Computing for Plug-and-Play Network Service Configuration Abstract Configuration, Distributed Computing, Plug-and-Play, PnP, Mobile Agents, Jini, CORBA 1. Introduction Network Management advertisement over the network. The process of service provisioning is completed with arranging, distributing

  18. Fuel cell repeater unit including frame and separator plate

    DOE Patents [OSTI]

    Yamanis, Jean; Hawkes, Justin R; Chiapetta, Jr., Louis; Bird, Connie E; Sun, Ellen Y; Croteau, Paul F

    2013-11-05T23:59:59.000Z

    An example fuel cell repeater includes a separator plate and a frame establishing at least a portion of a flow path that is operative to communicate fuel to or from at least one fuel cell held by the frame relative to the separator plate. The flow path has a perimeter and any fuel within the perimeter flow across the at least one fuel cell in a first direction. The separator plate, the frame, or both establish at least one conduit positioned outside the flow path perimeter. The conduit is outside of the flow path perimeter and is configured to direct flow in a second, different direction. The conduit is fluidly coupled with the flow path.

  19. Electra-optical device including a nitrogen containing electrolyte

    DOE Patents [OSTI]

    Bates, John B. (Oak Ridge, TN); Dudney, Nancy J. (Knoxville, TN); Gruzalski, Greg R. (Oak Ridge, TN); Luck, Christopher F. (Knoxville, TN)

    1995-01-01T23:59:59.000Z

    Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between -15.degree. C. and 150.degree. C.

  20. Electra-optical device including a nitrogen containing electrolyte

    DOE Patents [OSTI]

    Bates, J.B.; Dudney, N.J.; Gruzalski, G.R.; Luck, C.F.

    1995-10-03T23:59:59.000Z

    Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode. Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between {minus}15 C and 150 C.

  1. Including stereoscopic information in the reconstruction of coronal magnetic fields

    E-Print Network [OSTI]

    T. Wiegelmann; T. Neukirch

    2008-01-23T23:59:59.000Z

    We present a method to include stereoscopic information about the three dimensional structure of flux tubes into the reconstruction of the coronal magnetic field. Due to the low plasma beta in the corona we can assume a force free magnetic field, with the current density parallel to the magnetic field lines. Here we use linear force free fields for simplicity. The method uses the line of sight magnetic field on the photosphere as observational input. The value of $\\alpha$ is determined iteratively by comparing the reconstructed magnetic field with the observed structures. The final configuration is the optimal linear force solution constrained by both the photospheric magnetogram and the observed plasma structures. As an example we apply our method to SOHO MDI/EIT data of an active region. In the future it is planned to apply the method to analyse data from the SECCHI instrument aboard the STEREO mission.

  2. A Climatology of the Arctic on Mid-Tropospheric Temperature Regulation

    E-Print Network [OSTI]

    Anthony, Jeremy Patrick

    2014-06-24T23:59:59.000Z

    The Arctic is a unique and complex environment. Many factors play a role in determining the long-term climate of the Arctic, including mesoscale weather systems and many complex ice-albedo feedback mechanisms. Previous studies determined using real...

  3. Habitability of Super-Earth Planets around Other Suns: Models including Red Giant Branch Evolution

    E-Print Network [OSTI]

    W. von Bloh; M. Cuntz; K. -P. Schroeder; C. Bounama; S. Franck

    2008-12-04T23:59:59.000Z

    The unexpected diversity of exoplanets includes a growing number of super- Earth planets, i.e., exoplanets with masses of up to several Earth masses and a similar chemical and mineralogical composition as Earth. We present a thermal evolution model for a 10 Earth mass planet orbiting a star like the Sun. Our model is based on the integrated system approach, which describes the photosynthetic biomass production taking into account a variety of climatological, biogeochemical, and geodynamical processes. This allows us to identify a so-called photosynthesis-sustaining habitable zone (pHZ) determined by the limits of biological productivity on the planetary surface. Our model considers the solar evolution during the main-sequence stage and along the Red Giant Branch as described by the most recent solar model. We obtain a large set of solutions consistent with the principal possibility of life. The highest likelihood of habitability is found for "water worlds". Only mass-rich water worlds are able to realize pHZ-type habitability beyond the stellar main-sequence on the Red Giant Branch.

  4. Insulated conductor temperature limited heater for subsurface heating coupled in a three-phase WYE configuration

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Sandberg, Chester Ledlie (Palo Alto, CA)

    2010-11-09T23:59:59.000Z

    A heating system for a subsurface formation is described. The heating system includes a first heater, a second heater, and a third heater placed in an opening in the subsurface formation. Each heater includes: an electrical conductor; an insulation layer at least partially surrounding the electrical conductor; and an electrically conductive sheath at least partially surrounding the insulation layer. The electrical conductor is electrically coupled to the sheath at a lower end portion of the heater. The lower end portion is the portion of the heater distal from a surface of the opening. The first heater, the second heater, and the third heater are electrically coupled at the lower end portions of the heaters. The first heater, the second heater, and the third heater are configured to be electrically coupled in a three-phase wye configuration.

  5. Relativistic configuration-interaction calculation of $K\\alpha$ transition energies in beryllium-like argon

    E-Print Network [OSTI]

    Yerokhin, V A; Fritzsche, S

    2014-01-01T23:59:59.000Z

    Relativistic configuration-interaction calculations have been performed for the energy levels of the low-lying and core-excited states of beryllium-like argon, Ar$^{14+}$. These calculations include the one-loop QED effects as obtained by two different methods, the screening-potential approach as well as the model QED operator approach. The calculations are supplemented by a systematic estimation of uncertainties of theoretical predictions.

  6. Relativistic configuration-interaction calculation of $K\\alpha$ transition energies in beryllium-like iron

    E-Print Network [OSTI]

    Yerokhin, V A; Fritzsche, S

    2014-01-01T23:59:59.000Z

    We perform relativistic configuration-interaction calculations of the energy levels of the low-lying and core-excited states of beryllium-like iron, Fe$^{22+}$. The results include the QED contributions calculated by two different methods, the model QED operator approach and the screening-potential approach. The uncertainties of theoretical energies are estimated systematically. The predicted wavelengths of the K\\alpha transitions in beryllium-like iron improve previous theoretical results and compare favorably with the experimental data.

  7. Local geometrical properties of magnetic configurations with nested equilibrium magnetic surfaces

    SciTech Connect (OSTI)

    Skovoroda, A. A. [Russian Research Centre Kurchatov Institute, Nuclear Fusion Institute (Russian Federation)

    2009-04-15T23:59:59.000Z

    The complete set of universal local relationships between geometrical (the curvature and torsion of the force lines of the magnetic field and the field complementary to it) and magnetic (|B|, |{nabla}{Phi}|, b {center_dot} ({nabla} x b), and the local shear s) quantities in currentless magnetic configurations comprising a system of equilibrium nested magnetic surfaces, including those with several magnetic axes, is derived. Possible applications of these relationships are discussed.

  8. Method for wiring allocation and switch configuration in a multiprocessor environment

    DOE Patents [OSTI]

    Aridor, Yariv (Zichron Ya'akov, IL); Domany, Tamar (Kiryat Tivon, IL); Frachtenberg, Eitan (Jerusalem, IL); Gal, Yoav (Haifa, IL); Shmueli, Edi (Haifa, IL); Stockmeyer, legal representative, Robert E. (San Jose, CA); Stockmeyer, Larry Joseph (San Jose, CA)

    2008-07-15T23:59:59.000Z

    A method for wiring allocation and switch configuration in a multiprocessor computer, the method including employing depth-first tree traversal to determine a plurality of paths among a plurality of processing elements allocated to a job along a plurality of switches and wires in a plurality of D-lines, and selecting one of the paths in accordance with at least one selection criterion.

  9. Climatological data for clouds over the globe from surface observations, 1982--1991: The total cloud edition

    SciTech Connect (OSTI)

    Hahn, C.J. [Colorado Univ., Boulder, CO (United States). Cooperative Inst. for Research in Environmental Sciences] [Colorado Univ., Boulder, CO (United States). Cooperative Inst. for Research in Environmental Sciences; Warren, S.G. [Washington Univ., Seattle, WA (United States). Dept. of Atmospheric Sciences] [Washington Univ., Seattle, WA (United States). Dept. of Atmospheric Sciences; London, J. [Colorado Univ., Boulder, CO (United States). Dept. of Astrophysical, Planetary, and Atmospheric Sciences] [Colorado Univ., Boulder, CO (United States). Dept. of Astrophysical, Planetary, and Atmospheric Sciences

    1994-10-01T23:59:59.000Z

    Routine, surface synoptic weather reports from ships and land stations over the entire globe, for the ten-year period December 1981 through November 1991, were processed for total cloud cover and the frequencies of occurrence of clear sky, precipitation, and sky-obscured due to fog. Archived data, consisting of various annual, seasonal and monthly averages, are provided in grid boxes that are typically 2.5{degrees} {times} 2.5{degrees} for land and 5{degrees} {times} 5{degrees} for ocean. Day and nighttime averages are also given separately for each season. Several derived quantities, such as interannual variations and annual and diurnal harmonics, are provided as well. This data set incorporates an improved representation of nighttime cloudiness by utilizing only those nighttime observations for which the illuminance due to moonlight exceeds a specified threshold. This reduction in the night-detection bias increases the computed global average total cloud cover by about 2%. The impact on computed diurnal cycles is even greater, particularly over the oceans where is found, in contrast to previous surface-based climatologies, that cloudiness is often greater at night than during the day.

  10. Climatology of Mid-latitude Ionospheric Disturbances from the Very Large Array Low-frequency Sky Survey

    E-Print Network [OSTI]

    Helmboldt, J F; Cotton, W D

    2012-01-01T23:59:59.000Z

    The results of a climatological study of ionospheric disturbances derived from observations of cosmic sources from the Very Large Array (VLA) Low-frequency Sky Survey (VLSS) are presented. We have used the ionospheric corrections applied to the 74 MHz interferometric data within the VLSS imaging process to obtain fluctuation spectra for the total electron content (TEC) gradient on spatial scales from a few to hundreds of kilometers and temporal scales from less than one minute to nearly an hour. The observations sample nearly all times of day and all seasons. They also span latitudes and longitudes from 28 deg. N to 40 deg. N and 95 deg. W to 114 deg. W, respectively. We have binned and averaged the fluctuation spectra according to time of day, season, and geomagnetic (Kp index) and solar (F10.7) activity. These spectra provide a detailed, multi-scale account of seasonal and intraday variations in ionospheric activity with wavelike structures detected at wavelengths between about 35 and 250 km. In some cases,...

  11. A systematic approach to vertically excited states of ethylene using configuration interaction and coupled cluster techniques

    SciTech Connect (OSTI)

    Feller, David, E-mail: dfeller@owt.com; Peterson, Kirk A. [Department of Chemistry, Washington State University, Pullman, Washington 99164-4630 (United States); Davidson, Ernest R. [Department of Chemistry, University of Washington, Seattle, Washington 98195-1700 (United States)

    2014-09-14T23:59:59.000Z

    A systematic sequence of configuration interaction and coupled cluster calculations were used to describe selected low-lying singlet and triplet vertically excited states of ethylene with the goal of approaching the all electron, full configuration interaction/complete basis set limit. Included among these is the notoriously difficult, mixed valence/Rydberg {sup 1}B{sub 1u} V state. Techniques included complete active space and iterative natural orbital configuration interaction with large reference spaces which led to variational spaces of 1.8 10{sup 9} parameters. Care was taken to avoid unintentionally biasing the results due to the widely recognized sensitivity of the V state to the details of the calculation. The lowest vertical and adiabatic ionization potentials to the {sup 2}B{sub 3u} and {sup 2}B{sub 3} states were also determined. In addition, the heat of formation of twisted ethylene {sup 3}A{sub 1} was obtained from large basis set coupled cluster theory calculations including corrections for core/valence, scalar relativistic and higher order correlation recovery.

  12. On the configuration space topology in general relativity

    E-Print Network [OSTI]

    Domenico Giulini

    1993-01-25T23:59:59.000Z

    The configuration-space topology in canonical General Relativity depends on the choice of the initial data 3-manifold. If the latter is represented as a connected sum of prime 3-manifolds, the topology receives contributions from all configuration spaces associated to each individual prime factor. There are by now strong results available concerning the diffeomorphism group of prime 3-manifolds which are exploited to examine the topology of the configuration spaces in terms of their homotopy groups. We explicitly show how to obtain these for the class of homogeneous spherical primes, and communicate the results for all other known primes except the non-sufficiently large ones of infinite fundamental group.

  13. Central Configurations in the Trapezoidal Four-Body Problems

    E-Print Network [OSTI]

    Muhammad Shoaib

    2015-03-28T23:59:59.000Z

    In this paper we discuss the central configurations of the Trapezoidal four-body Problem. We consider four point masses on the vertices of an isosceles trapezoid with two equal masses $m_1=m_4$ at positions $(\\mp 0.5, r_B)$ and $m_2=m_3$ at positions $(\\mp \\alpha/2, r_A)$. We derive, both analytically and numerically, regions of central configurations in the phase space where it is possible to choose positive masses. It is also shown that in the compliment of these regions no central configurations are possible.

  14. Integrated Coverage and Connectivity Configuration for Energy Conservation

    E-Print Network [OSTI]

    Lu, Chenyang

    Integrated Coverage and Connectivity Configuration for Energy Conservation in Sensor Networks University in St. Louis An effective approach for energy conservation in wireless sensor networks: Sensor network, wireless ad hoc network, coverage, connectiv- ity, energy conservation, topology

  15. A study of neutron-deuteron scattering in configuration space

    E-Print Network [OSTI]

    V. M. Suslov; M. A. Braun; I. Filikhin; B. Vlahovic

    2006-10-09T23:59:59.000Z

    A new computational method for solving the configuration-space Faddeev equations for the breakup scattering problem has been applied to nd scattering both below and above the two-body threshold.

  16. Multi-channel atomic magnetometer for magnetoencephalography: A configuration study

    E-Print Network [OSTI]

    Romalis, Mike

    emission tomography (PET). Specifically, due to its high temporal resolution, MEG has a unique position are a high rate of liquid helium consumption, fixed sensor configuration, frequent requirement for cryogenic

  17. Finding All Valid Hand Configurations for a Given Precision Grasp

    E-Print Network [OSTI]

    Ros, Lluís

    - Normal on contact point Formulation Robot hand MA-I mounted on a robot arm Test cases Find all Iteration of 2 basic steps The configuration of the robot arm has a closed-form solution Dimension

  18. Adsorption configurations of two nitrogen atoms on graphene

    SciTech Connect (OSTI)

    Rani, Babita, E-mail: babitabaghla15@gmail.com [Department of Physics, Punjabi University, Patiala- 147 002 and Department of Physics, Panjab University, Chandigarh- 160 014 (India); Jindal, V. K.; Dharamvir, Keya [Department of Physics, Panjab University, Chandigarh- 160 014 (India)

    2014-04-24T23:59:59.000Z

    We present calculations for different possible configurations of two nitrogen adatoms on graphene using the code VASP, based on Density Functional Theory (DFT). Two N atoms adsorbed on the graphene sheet can share a bond in two ways. They take positions either just above two adjacent carbon atoms or they form a bridge across opposite bonds of a hexagon in the graphene sheet. Both these configurations result into structural distortion of the sheet. Another stable configuration involving two N atoms consists of an N{sub 2} molecule which is physisorbed at a distance 3.69 on the graphene sheet. Two N atoms can also be adsorbed on alternate bridge sites of neighbouring hexagons of graphene. This configuration again leads to distortion of the sheet in perpendicular direction.

  19. Constrained Density-Functional Theory--Configuration Interaction

    E-Print Network [OSTI]

    Kaduk, Benjamin James

    2012-01-01T23:59:59.000Z

    In this thesis, I implemented a method for performing electronic structure calculations, "Constrained Density Functional Theory-- Configuration Interaction" (CDFT-CI), which builds upon the computational strengths of Density ...

  20. MHK technologies include current energy conversion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    research leverages decades of experience in engineering and design and analysis (D&A) of wind power technologies, and its vast research complex, including high-performance...

  1. Advanced configurations for leakage reduction in a labyrinth seal

    E-Print Network [OSTI]

    Veldanda, Sharath B.

    1992-01-01T23:59:59.000Z

    ADVANCED CONFIGURATIONS FOR LEAKAGE REDUCTION IN A LABYRINTH SEAL A Thesis by SHARATH B. VELDANDA Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE December 1992 Major Subject: Mechanical Engineering ADVANCED CONFIGURATION FOR LEAKAGE REDUCTION IN A LABYRINTH SEAL A Thesis by SHARATH B. VELDANDA Approved as to style and content by: David L. Rhode y~~ (Member) K. D. Korkan (Member...

  2. THERMAL ANALYSIS OF 3013/9975 CONFIGURATION

    SciTech Connect (OSTI)

    Gupta, N.

    2009-11-10T23:59:59.000Z

    The 3013 containers are designed in accordance with the DOE-STD-3013-2004 and are qualified to store plutonium (Pu) bearing materials for 50 years. The U.S. Department of Energy (DOE) certified Model 9975 shipping package is used to transport the 3013 containers to the K-Area Material Storage (KAMS) facility at the Savannah River Site (SRS) and to store the containers until the plutonium can be properly dispositioned. Detailed thermal analyses to support the storage in the KAMS facility are given in References 2, 3, and 4. The analyses in this paper serve to provide non-accident condition, non-bounding, specific 3013 container temperatures for use in the surveillance activities. This paper presents a methodology where critical component temperatures are estimated using numerical methods over a range of package and storage parameters. The analyses include factors such as ambient storage temperature and the content weight, density, heat generation rate, and fill height, that may impact the thermal response of the packages. Statistical methods are used to develop algebraic equations for ease of computations to cover the factor space. All computations were performed in BTU-FT-Hr-{sup o}F units.

  3. A Single Tower Configuration of the Modular Gamma Box Counter System - 13392

    SciTech Connect (OSTI)

    Morris, K.; Nakazawa, D.; Francalangia, J.; Gonzalez, H. [Canberra Industries Inc., 800 Research Parkway, Meriden, CT, 06450 (United States)] [Canberra Industries Inc., 800 Research Parkway, Meriden, CT, 06450 (United States)

    2013-07-01T23:59:59.000Z

    Canberra's Standard Gamma Box Counter System is designed to perform accurate quantitative assays of gamma emitting nuclides for a wide range of large containers including B-25 crates and ISO shipping containers. Using a modular building-block approach, the system offers tremendous flexibility for a variety of measurement situations with wide ranges of sample activities and throughput requirements, as well as the opportunity to modify the configuration for other applications at a later date. The typical configuration consists of two opposing towers each equipped with two high purity germanium detectors, and an automated container trolley. This paper presents a modified configuration, consisting of a single tower placed inside a measurement trailer with three detector assemblies, allowing for additional vertical segmentation as well as a viewing a container outside the trailer through the trailer wall. An automatic liquid nitrogen fill system is supplied for each of the detectors. The use of a forklift to move the container for horizontal segmentation is accommodated by creating an additional operational and calibration set-up in the NDA 2000 software to allow for the operator to rotate the container and assay the opposite side, achieving the same sensitivity as a comparable two-tower system. This Segmented Gamma Box Counter System retains the core technologies and design features of the standard configuration. The detector assemblies are shielded to minimize interference from environmental and plant background, and are collimated to provide segmentation of the container. The assembly positions can also be modified in height and distance from the container. The ISOCS calibration software provides for a flexible approach to providing the calibrations for a variety of measurement geometries. The NDA 2000 software provides seamless operation with the current configuration, handling the data acquisition and analysis. In this paper, an overview of this system is discussed, along with the measured performance results, calibration methodology and verification, and minimum detectable activity levels. (authors)

  4. The Global Historical Climatology Network: Long-term monthly temperature, precipitation, sea level pressure, and station pressure data

    SciTech Connect (OSTI)

    Vose, R.S. [Tennessee Univ., Knoxville, TN (United States). Energy, Environment and Resources Center; Schmoyer, R.L. [Oak Ridge National Lab., TN (United States); Steurer, P.M.; Peterson, T.C.; Heim, R.; Karl, T.R. [National Climatic Data Center, Asheville, NC (United States); Eischeid, J.K. [Colorado Univ., Boulder, CO (United States). Cooperative Inst. for Research in Environmental Sciences

    1992-07-01T23:59:59.000Z

    Interest in global climate change has risen dramatically during the last several years. In a similar fashion, the number of data sets available to study global change has also increased. Unfortunately, these data sets have been compiled by many different organizations/researchers, making it confusing and time consuming for individual researchers to acquire the ``best`` data. In response to this rapid growth in the number of global data sets, the Carbon Dioxide Information Analysis Center (CDIAC) and the National Climatic Data Center (NCDC) commenced the Global Historical Climatology Network (GHCN) project. The purpose of this project is to compile an improved global base-line data set of long-term monthly mean temperature, precipitation, sea level pressure, and station pressure for a dense network. of worldwide meteorological stations. Specifically, the GHCN project seeks to consolidate the numerous preexisting national-, regional-, and global-scale data sets into a single global climate data base that can be updated, enhanced, and distributed at regular intervals. The first version of the GHCN data base was completed during the summer of 1992. It contains 6039 temperature, 7533 precipitation, 1883 sea level pressure, and 1873 station pressure stations. All stations have at least 10 years of data, 40% have more than 50 years of data, and 10% have more than 100 years of data. Spatial coverage is good over most of the globe, particularly for the United States and central Europe. In comparison to other major global data sets, dramatic improvements are evident over South America, Africa, and Asia. The GHCN data base is available as a Numeric Data Package (NDP) from CDIAC. The NDP consists of this document and two magnetic tapes that contain machine-readable data files and accompanying retrieval codes. This document describes, in detail, both the GHCN data base and the contents of the magnetic tap

  5. The Global Historical Climatology Network: Long-term monthly temperature, precipitation, sea level pressure, and station pressure data

    SciTech Connect (OSTI)

    Vose, R.S. (Tennessee Univ., Knoxville, TN (United States). Energy, Environment and Resources Center); Schmoyer, R.L. (Oak Ridge National Lab., TN (United States)); Steurer, P.M.; Peterson, T.C.; Heim, R.; Karl, T.R. (National Climatic Data Center, Asheville, NC (United States)); Eischeid, J.K. (Colorado Univ., Boulder, CO (United States). Cooperative Inst. for Research in Environmental Sciences)

    1992-07-01T23:59:59.000Z

    Interest in global climate change has risen dramatically during the last several years. In a similar fashion, the number of data sets available to study global change has also increased. Unfortunately, these data sets have been compiled by many different organizations/researchers, making it confusing and time consuming for individual researchers to acquire the best'' data. In response to this rapid growth in the number of global data sets, the Carbon Dioxide Information Analysis Center (CDIAC) and the National Climatic Data Center (NCDC) commenced the Global Historical Climatology Network (GHCN) project. The purpose of this project is to compile an improved global base-line data set of long-term monthly mean temperature, precipitation, sea level pressure, and station pressure for a dense network. of worldwide meteorological stations. Specifically, the GHCN project seeks to consolidate the numerous preexisting national-, regional-, and global-scale data sets into a single global climate data base that can be updated, enhanced, and distributed at regular intervals. The first version of the GHCN data base was completed during the summer of 1992. It contains 6039 temperature, 7533 precipitation, 1883 sea level pressure, and 1873 station pressure stations. All stations have at least 10 years of data, 40% have more than 50 years of data, and 10% have more than 100 years of data. Spatial coverage is good over most of the globe, particularly for the United States and central Europe. In comparison to other major global data sets, dramatic improvements are evident over South America, Africa, and Asia. The GHCN data base is available as a Numeric Data Package (NDP) from CDIAC. The NDP consists of this document and two magnetic tapes that contain machine-readable data files and accompanying retrieval codes. This document describes, in detail, both the GHCN data base and the contents of the magnetic tap

  6. Formation of a field reversed configuration for magnetic and electrostatic confinement of plasma

    DOE Patents [OSTI]

    Rostoker, Norman; Binderbauer, Michl

    2003-12-16T23:59:59.000Z

    A system and method for containing plasma and forming a Field Reversed Configuration (FRC) magnetic topology are described in which plasma ions are contained magnetically in stable, non-adiabatic orbits in the FRC. Further, the electrons are contained electrostatically in a deep energy well, created by tuning an externally applied magnetic field. The simultaneous electrostatic confinement of electrons and magnetic confinement of ions avoids anomalous transport and facilitates classical containment of both electrons and ions. In this configuration, ions and electrons may have adequate density and temperature so that upon collisions they are fused together by nuclear force, thus releasing fusion energy. Moreover, the fusion fuel plasmas that can be used with the present confinement system and method are not limited to neutronic fuels only, but also advantageously include advanced fuels.

  7. Formation of a field reversed configuration for magnetic and electrostatic confinement of plasma

    DOE Patents [OSTI]

    Rostoker, Norman; Binderbauer, Michl; Qerushi, Artan; Tahsiri, Hooshang

    2007-02-20T23:59:59.000Z

    A system and method for containing plasma and forming a Field Reversed Configuration (FRC) magnetic topology are described in which plasma ions are contained magnetically in stable, non-adiabatic orbits in the FRC. Further, the electrons are contained electrostatically in a deep energy well, created by tuning an externally applied magnetic field. The simultaneous electrostatic confinement of electrons and magnetic confinement of ions avoids anomalous transport and facilitates classical containment of both electrons and ions. In this configuration, ions and electrons may have adequate density and temperature so that upon collisions they are fused together by nuclear force, thus releasing fusion energy. Moreover, the fusion fuel plasmas that can be used with the present confinement system and method are not limited to neutronic fuels only, but also advantageously include advanced fuels.

  8. Formation of a field reversed configuration for magnetic and electrostatic confinement of plasma

    DOE Patents [OSTI]

    Rostoker, Norman; Binderbauer, Michl; Qerushi, Artan; Tahsiri, Hooshang

    2006-02-07T23:59:59.000Z

    A system and method for containing plasma and forming a Field Reversed Configuration (FRC) magnetic topology are described in which plasma ions are contained magnetically in stable, non-adiabatic orbits in the FRC. Further, the electrons are contained electrostatically in a deep energy well, created by tuning an externally applied magnetic field. The simultaneous electrostatic confinement of electrons and magnetic confinement of ions avoids anomalous transport and facilitates classical containment of both electrons and ions. In this configuration, ions and electrons may have adequate density and temperature so that upon collisions they are fused together by nuclear force, thus releasing fusion energy. Moreover, the fusion fuel plasmas that can be used with the present confinement system and method are not limited to neutronic fuels only, but also advantageously include advanced fuels.

  9. On the Configuration of the US Western Interconnection Voltage Stability Boundary

    SciTech Connect (OSTI)

    Makarov, Yuri V.; Vyakaranam, Bharat; Wu, Di; Hou, Zhangshuan; Elbert, Stephen T.; Huang, Zhenyu

    2014-04-01T23:59:59.000Z

    AbstractStability limits are considered in power system planning and operations to estimate the available stability margins and, if possible, to maximize the utilization of transmission facilities. These important tasks are influenced by configuration of the stability boundary. The paper introduces a new fast approach to explore the voltage stability boundary of a large system and reveal its detailed multidimensional structure. The 17939-bus U.S. Western Interconnection planning model was used to illustrate the method. Significant peculiarities of the boundarys configuration were identified, including its nonconvexity, discontinuity, branching and internal singularities (holes) that were not known before and could not been found by traditional methods. Experiments using WECC system are performed to evaluate the computation time using different methods. Our results show that the proposed methods are very promising in reducing calculation time and complexity

  10. EE Regional Technology Roadmap Includes comparison

    E-Print Network [OSTI]

    EE Regional Technology Roadmap Includes comparison against 6th Power Plan (Update cyclically Data Clearinghouse BPA/RTF NEEA/Regional Programs Group Update Regional EE Technology Roadmap Lighting

  11. DIDACTICAL HOLOGRAPHIC EXHIBIT INCLUDING (HOLOGRAPHIC TELEVISION)

    E-Print Network [OSTI]

    de Aguiar, Marcus A. M.

    DIDACTICAL HOLOGRAPHIC EXHIBIT INCLUDING HoloTV (HOLOGRAPHIC TELEVISION) José J. Lunazzi , DanielCampinasSPBrasil Abstract: Our Institute of Physics exposes since 1980 didactical exhibitions of holography in Brazil where

  12. Sessions include: Beginning Farmer and Rancher

    E-Print Network [OSTI]

    Watson, Craig A.

    Sessions include: Beginning Farmer and Rancher New Markets and Regulations Food Safety Good Bug, Bad Bug ID Horticulture Hydroponics Livestock and Pastured Poultry Mushrooms Organic Live animal exhibits Saturday evening social, and Local foods Florida Small Farms and Alternative

  13. Electrical machines and assemblies including a yokeless stator with modular lamination stacks

    DOE Patents [OSTI]

    Qu, Ronghai; Jansen, Patrick Lee; Bagepalli, Bharat Sampathkumar; Carl, Jr., Ralph James; Gadre, Aniruddha Dattatraya; Lopez, Fulton Jose

    2010-04-06T23:59:59.000Z

    An electrical machine includes a rotor with an inner rotor portion and an outer rotor portion, and a double-sided yokeless stator. The yokeless stator includes modular lamination stacks and is configured for radial magnetic flux flow. The double-sided yokeless stator is concentrically disposed between the inner rotor portion and the outer rotor portion of the electrical machine. Examples of particularly useful embodiments for the electrical machine include wind turbine generators, ship propulsion motors, switch reluctance machines and double-sided synchronous machines.

  14. Gas storage materials, including hydrogen storage materials

    DOE Patents [OSTI]

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25T23:59:59.000Z

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  15. Gas storage materials, including hydrogen storage materials

    DOE Patents [OSTI]

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19T23:59:59.000Z

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  16. Stability and confinement of spheromaks and field-reversed configurations

    SciTech Connect (OSTI)

    Quinn, W.E.

    1982-01-01T23:59:59.000Z

    The formation, confinement and stability of two types of compact toroids, spheromaks and field reversed configurations (FRC), are reviewed. Spheromaks, which contain both toroidal and poloidal magnetic fields, have been formed with magnetized coaxial plasma guns, by a combination of Z- and theta-pinch techniques and by an electrodeless slow induction technique, and trapped in both prolate and oblate flux conservers. As predicted by theory, the prolate configuration is unstable to the tilt mode, but the oblate configuration with a conducting wall is stable. Configuration lifetimes of up to 0.8 ms are observed. The FRC is a high-beta, highly prolate compact toroid formed with field-reversed theta-pinch techniques and having purely poloidal magnetic field. Theory predicts unstable fluting and internal tilting modes, but they are not observed experimentally. Configurations with high densities approx. 10/sup 15/ cm/sup -3/ and with lifetimes of 50 to 120 ..mu..s are terminated by an n=2 rotational mode of instability.

  17. Weak formulations and solution multiplicity of equilibrium configurations with Coulomb friction

    E-Print Network [OSTI]

    Bostan, Mihai

    Weak formulations and solution multiplicity of equilibrium configurations with Coulomb friction configurations of elastic struc- tures in contact with Coulomb friction. We obtain a variational formulation configurations with arbitrary small friction coefficients. We illustrate the result in two space dimensions

  18. Electric Power Monthly, August 1990. [Glossary included

    SciTech Connect (OSTI)

    Not Available

    1990-11-29T23:59:59.000Z

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  19. Of fishes and birthdays: Efficient estimation of polymer configurational entropies

    E-Print Network [OSTI]

    Nemenman, Ilya; Strauss, Charlie E

    2015-01-01T23:59:59.000Z

    We present an algorithm to estimate the configurational entropy $S$ of a polymer. The algorithm uses the statistics of coincidences among random samples of configurations and is related to the catch-tag-release method for estimation of population sizes, and to the classic "birthday paradox". Bias in the entropy estimation is decreased by grouping configurations in nearly equiprobable partitions based on their energies, and estimating entropies separately within each partition. Whereas most entropy estimation algorithms require $N\\sim 2^{S}$ samples to achieve small bias, our approach typically needs only $N\\sim \\sqrt{2^{S}}$. Thus the algorithm can be applied to estimate protein free energies with increased accuracy and decreased computational cost.

  20. Communication in automation, including networking and wireless

    E-Print Network [OSTI]

    Antsaklis, Panos

    Communication in automation, including networking and wireless Nicholas Kottenstette and Panos J and networking in automation is given. Digital communication fundamentals are reviewed and networked control are presented. 1 Introduction 1.1 Why communication is necessary in automated systems Automated systems use

  1. Electrochemical cell including ribbed electrode substrates

    SciTech Connect (OSTI)

    Breault, R.D.; Goller, G.J.; Roethlein, R.J.; Sprecher, G.C.

    1981-07-21T23:59:59.000Z

    An electrochemical cell including an electrolyte retaining matrix layer located between and in contact with cooperating anode and cathode electrodes is disclosed herein. Each of the electrodes is comprised of a ribbed (or grooved) substrate including a gas porous body as its main component and a catalyst layer located between the substrate and one side of the electrolyte retaining matrix layer. Each substrate body includes a ribbed section for receiving reactant gas and lengthwise side portions on opposite sides of the ribbed section. Each of the side portions includes a channel extending along its entire length from one surface thereof (e.g., its outer surface) to but stopping short of an opposite surface (e.g., its inner surface) so as to provide a web directly between the channel and the opposite surface. Each of the channels is filled with a gas impervious substance and each of the webs is impregnated with a gas impervious substance so as to provide a gas impervious seal along the entire length of each side portion of each substrate and between the opposite faces thereof (e.g., across the entire thickness thereof).

  2. Prices include compostable serviceware and linen tablecloths

    E-Print Network [OSTI]

    California at Davis, University of

    & BLACK BEAN ENCHILADAS Fresh corn tortillas stuffed with tender brown butter sauted butternut squash, black beans and yellow on- ions, garnished with avocado and sour cream. $33 per person EDAMAME & CORN SQUASH & BLACK BEAN ENCHILADA FREE RANGE CHICK- EN SANDWICH PLATED ENTREES All plated entrees include

  3. Energy Consumption of Personal Computing Including Portable

    E-Print Network [OSTI]

    Namboodiri, Vinod

    Energy Consumption of Personal Computing Including Portable Communication Devices Pavel Somavat1 consumption, questions are being asked about the energy contribution of computing equipment. Al- though studies have documented the share of energy consumption by this type of equipment over the years, research

  4. Equilibrium configurations of nematic liquid crystals on a torus

    E-Print Network [OSTI]

    Antonio Segatti; Michael Snarski; Marco Veneroni

    2014-06-13T23:59:59.000Z

    The topology and the geometry of a surface play a fundamental role in determining the equilibrium configurations of thin films of liquid crystals. We propose here a theoretical analysis of a recently introduced surface Frank energy, in the case of two-dimensional nematic liquid crystals coating a toroidal particle. Our aim is to show how a different modeling of the effect of extrinsic curvature acts as a selection principle among equilibria of the classical energy, and how new configurations emerge. In particular, our analysis predicts the existence of new stable equilibria with complex windings.

  5. Inductrack III configuration--a maglev system for high loads

    DOE Patents [OSTI]

    Post, Richard F

    2013-11-12T23:59:59.000Z

    Inductrack III configurations are suited for use in transporting heavy freight loads. Inductrack III addresses a problem associated with the cantilevered track of the Inductrack II configuration. The use of a cantilevered track could present mechanical design problems in attempting to achieve a strong enough track system such that it would be capable of supporting very heavy loads. In Inductrack III, the levitating portion of the track can be supported uniformly from below, as the levitating Halbach array used on the moving vehicle is a single-sided one, thus does not require the cantilevered track as employed in Inductrack II.

  6. Method for making precisely configured flakes useful in optical devices

    DOE Patents [OSTI]

    Trajkovska-Petkoska, Anka (Rochester, NY); Jacobs, Stephen D. (Pittsford, NY); Kosc, Tanya Z. (Rochester, NY); Marshall, Kenneth L. (Rochester, NY)

    2007-07-03T23:59:59.000Z

    Precisely configured, especially of geometric shape, flakes of liquid crystal material are made using a mechanically flexible polymer mold with wells having shapes which are precisely configured by making the mold with a photolithographically manufactured or laser printed master. The polymer liquid crystal is poured into the wells in the flexible mold. When the liquid crystal material has solidified, the flexible mold is bent and the flakes are released and collected for use in making an electrooptical cell utilizing the liquid crystal flakes as the active element therein.

  7. Subterranean barriers including at least one weld

    DOE Patents [OSTI]

    Nickelson, Reva A.; Sloan, Paul A.; Richardson, John G.; Walsh, Stephanie; Kostelnik, Kevin M.

    2007-01-09T23:59:59.000Z

    A subterranean barrier and method for forming same are disclosed, the barrier including a plurality of casing strings wherein at least one casing string of the plurality of casing strings may be affixed to at least another adjacent casing string of the plurality of casing strings through at least one weld, at least one adhesive joint, or both. A method and system for nondestructively inspecting a subterranean barrier is disclosed. For instance, a radiographic signal may be emitted from within a casing string toward an adjacent casing string and the radiographic signal may be detected from within the adjacent casing string. A method of repairing a barrier including removing at least a portion of a casing string and welding a repair element within the casing string is disclosed. A method of selectively heating at least one casing string forming at least a portion of a subterranean barrier is disclosed.

  8. Power generation method including membrane separation

    DOE Patents [OSTI]

    Lokhandwala, Kaaeid A. (Union City, CA)

    2000-01-01T23:59:59.000Z

    A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

  9. Rotor assembly including superconducting magnetic coil

    DOE Patents [OSTI]

    Snitchler, Gregory L. (Shrewsbury, MA); Gamble, Bruce B. (Wellesley, MA); Voccio, John P. (Somerville, MA)

    2003-01-01T23:59:59.000Z

    Superconducting coils and methods of manufacture include a superconductor tape wound concentrically about and disposed along an axis of the coil to define an opening having a dimension which gradually decreases, in the direction along the axis, from a first end to a second end of the coil. Each turn of the superconductor tape has a broad surface maintained substantially parallel to the axis of the coil.

  10. Electric power monthly, September 1990. [Glossary included

    SciTech Connect (OSTI)

    Not Available

    1990-12-17T23:59:59.000Z

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  11. Thin film solar cell configuration and fabrication method

    DOE Patents [OSTI]

    Menezes, Shalini

    2009-07-14T23:59:59.000Z

    A new photovoltaic device configuration based on an n-copper indium selenide absorber and a p-type window is disclosed. A fabrication method to produce this device on flexible or rigid substrates is described that reduces the number of cell components, avoids hazardous materials, simplifies the process steps and hence the costs for high volume solar cell manufacturing.

  12. Optimization of measurement configurations for geometrical calibration of industrial robot

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , the accuracy of robotic manipulator depends on a number of factors. Usually, for the industrial applicationsOptimization of measurement configurations for geometrical calibration of industrial robot Alexandr of industrial robots employed in precise manufacturing. To identify geometric parameters, an advanced

  13. Polyhedral-Based Data Reuse Optimization for Configurable Computing

    E-Print Network [OSTI]

    Jalali. Bahram

    Polyhedral-Based Data Reuse Optimization for Configurable Computing Louis-Noel Pouchet,1 Peng with careful software-based data reuse and communication scheduling techniques. We present a fully automated C Zhang,1 P. Sadayappan,2 Jason Cong1 1 University of California, Los Angeles {pouchet

  14. CONFIGURING A COLLABORATIVE VIRTUAL WORKSPACE FOR DISASTER MANAGEMENT OF

    E-Print Network [OSTI]

    Barbosa, Alberto

    CONFIGURING A COLLABORATIVE VIRTUAL WORKSPACE FOR DISASTER MANAGEMENT OF OIL & GAS OFFSHORE , and Brje Karlsson 5 ABSTRACT There are serious risks involved in running offshore units, with many reported workspace. Finally a prototype for oil & gas offshore structures disaster management based on our multi

  15. Electromagnetic Waves Propagation in 3D Plasma Configurations

    E-Print Network [OSTI]

    Electromagnetic Waves Propagation in 3D Plasma Configurations Pavel Popovich, W. Anthony Cooper in a plasma strongly depends on the frequency, therefore the tools used for wave propagation studies are very that will allow for the calculation of the fields and energy deposition of a low-frequency wave propagating

  16. Accelerating Pipelined Integer and Floating-Point Accumulations in Configurable

    E-Print Network [OSTI]

    Martonosi, Margaret

    Accelerating Pipelined Integer and Floating-Point Accumulations in Configurable Hardware addition until the end of a repeated calculation such as accumulation or dot- product; this effectively and floating- point designs that use our technique. Our pipelined integer multiply-accumulate (MAC) design

  17. Model-Driven Process Configuration of Enterprise Systems*

    E-Print Network [OSTI]

    van der Aalst, Wil

    have been funded by SAP Research and Queensland University of Technology with the project "ModellingModel-Driven Process Configuration of Enterprise Systems* Alexander Dreiling, Michael Rosemann Queensland University of Technology Wil van der Aalst Eindhoven University of Technology Wasim Sadiq SAP

  18. A Configurable Reference Modelling Language1 M. Rosemanna

    E-Print Network [OSTI]

    van der Aalst, Wil

    , Configuration, Event-driven Process Chains 1 This research project is financially supported by SAP Corporate reference models "just" depict the possible system capabilities and cannot sufficiently guide the project, Eindhoven, The Netherlands, w.m.p.v.d.aalst@tm.tue.nl Abstract Enterprise Systems (ES) are comprehensive off

  19. Configural Response Learning: The Acquisition of a Nonpredictive Motor Skill

    E-Print Network [OSTI]

    Ivry, Rich

    different types of strokes. Similarly, when learning to type or to play musical instrumentsConfigural Response Learning: The Acquisition of a Nonpredictive Motor Skill Eliot Hazeltine learning using a task that required simultaneous keypresses with 2 or 3 fingers, similar to the production

  20. Exploratory Patent Search with Faceted Search and Configurable Entity Mining

    E-Print Network [OSTI]

    Tzitzikas, Yannis

    Exploratory Patent Search with Faceted Search and Configurable Entity Mining Pavlos Fafalios1 Searching for patents is usually a recall-oriented problem and depending on the patent search type, quite. We propose an exploratory strategy for patent search that exploits the metadata already available

  1. Preconceptual ABC design definition and system configuration layout

    SciTech Connect (OSTI)

    Barthold, W. [Barthold & Associates, Inc., Knoxville, TN (United States)

    1995-03-01T23:59:59.000Z

    This document is the conceptual design document for the follow-on to the Molten Salt Breeder Reactor, known as the ABC type reactor. It addresses blanket design options, containment options, off-gas systems, drainage systems, and components/layouts of the primary, secondary, and tertiary systems, and it contains a number of diagrams for the configuration of the major systems.

  2. A Highly Configurable Cache for Low Energy Embedded Systems

    E-Print Network [OSTI]

    Najjar, Walid A.

    A Highly Configurable Cache for Low Energy Embedded Systems CHUANJUN ZHANG San Diego State University and FRANK VAHID and WALID NAJJAR University of California, Riverside Energy consumption is a major for about 50% of the total energy consumed in these systems. The performance of a given cache architecture

  3. Network Configuration and Management via Two-Phase Online Optimization

    E-Print Network [OSTI]

    Yuksel, Murat

    with highly dynamic behavior, it is not practical to accurately capture system's response with a model rates or variable demand profile. In this paper, we take the latter approach and perform in-situ trials the best configuration settings for networks is becoming more difficult. Manageabil- ity of large

  4. Novel Dipole Trapped Spheromak Configuration M. R. Brown,1,

    E-Print Network [OSTI]

    Brown, Michael R.

    Novel Dipole Trapped Spheromak Configuration M. R. Brown,1, * C. D. Cothran,1 J. Fung,1 M. J. Schaffer,2 and E. Belova3 We report the observation and characterization of a spheromak formed in the Swarthmore Spheromak Experiment (SSX) and trapped in a simple dipole magnetic field. The spheromak is studied

  5. CRAD, Configuration Management- Los Alamos National Laboratory Weapons Facility

    Broader source: Energy.gov [DOE]

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for an assessment of the Configuration Management program at the Los Alamos National Laboratory, Weapons Facility.

  6. On Cavitation, Configurational Forces and Implications for Fracture in

    E-Print Network [OSTI]

    Sivaloganathan, J.

    On Cavitation, Configurational Forces and Implications for Fracture in a Nonlinearly Elastic tensile stress can induce cavitation, that is, the appearance of voids that were not previously evident con- sequence of this viewpoint is that cavitation may then take place at a point

  7. Instruction Set Extension with Shadow Registers for Configurable Processors

    E-Print Network [OSTI]

    Cong, Jason "Jingsheng"

    limitation in configurable processors, and then propose a novel low-cost architectural extension growing despite increasingly expensive CAD tools. This urges a move toward the use of programmable. Reconfigurable platforms, combined reconfigurable fabric with a general-purpose processor, are a promising

  8. Multiverse rate equation including bubble collisions

    E-Print Network [OSTI]

    Michael P. Salem

    2013-02-19T23:59:59.000Z

    The volume fractions of vacua in an eternally inflating multiverse are described by a coarse-grain rate equation, which accounts for volume expansion and vacuum transitions via bubble formation. We generalize the rate equation to account for bubble collisions, including the possibility of classical transitions. Classical transitions can modify the details of the hierarchical structure among the volume fractions, with potential implications for the staggering and Boltzmann-brain issues. Whether or not our vacuum is likely to have been established by a classical transition depends on the detailed relationships among transition rates in the landscape.

  9. CLIMATE PRODUCTS Basic Climatology

    E-Print Network [OSTI]

    System (AWOS) Operated by the Federal Aviation Administration (FAA) About 600 FAA stations Data (COOP) #12;NWS ASOS and AWOS Automated Surface Observing System (ASOS) 882 NWS/FAA stations

  10. COLORADO CLIMATE Basic Climatology

    E-Print Network [OSTI]

    or cold, wetness or dryness, calm or storm, clearness or cloudiness Climate - the statistical collection;The Earth's Energy Balance Incoming energy from the sun (solar radiation) heats the Earth Some by the Earth and re-emitted Incoming solar radiation is shorter wavelengths (higher energy) than what

  11. MONITORING DROUGHT Basic Climatology

    E-Print Network [OSTI]

    of water in watersheds, rivers; often lags agriculture impacts Socio-Economic Drought shortage of some be another's "wonderful weather" But in long-term drought, almost everyone suffers There's not enough water item (water, food, fish, natural values) that affects the balance of supply and demand Source: National

  12. WEATHER HAZARDS Basic Climatology

    E-Print Network [OSTI]

    Prediction Center (SPC) Watch Atmospheric conditions are right for hazardous weather ­ hazardous weather is likely to occur Issued by SPC Warning Hazardous weather is either imminent or occurring Issued by local NWS office #12;Outlooks--SPC Storm Prediction Center (SPC) Outlook=Convective Outlook Day 1 Day 2

  13. ALTERING CLIMATE Basic Climatology

    E-Print Network [OSTI]

    Monitor and Report Reduce smokestack emissions Remove sulfur at the source; clean coal Use scrubbers

  14. 3. New Cloud Climatology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032) -Less isNFebruaryOctober 2, 2014Energy,FNeed more4 3.2 3.6P DNew

  15. Optical panel system including stackable waveguides

    DOE Patents [OSTI]

    DeSanto, Leonard (Dunkirk, MD); Veligdan, James T. (Manorville, NY)

    2007-11-20T23:59:59.000Z

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  16. Optical panel system including stackable waveguides

    DOE Patents [OSTI]

    DeSanto, Leonard; Veligdan, James T.

    2007-03-06T23:59:59.000Z

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  17. Thermovoltaic semiconductor device including a plasma filter

    DOE Patents [OSTI]

    Baldasaro, Paul F. (Clifton Park, NY)

    1999-01-01T23:59:59.000Z

    A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

  18. Engine lubrication circuit including two pumps

    DOE Patents [OSTI]

    Lane, William H.

    2006-10-03T23:59:59.000Z

    A lubrication pump coupled to the engine is sized such that the it can supply the engine with a predetermined flow volume as soon as the engine reaches a peak torque engine speed. In engines that operate predominately at speeds above the peak torque engine speed, the lubrication pump is often producing lubrication fluid in excess of the predetermined flow volume that is bypassed back to a lubrication fluid source. This arguably results in wasted power. In order to more efficiently lubricate an engine, a lubrication circuit includes a lubrication pump and a variable delivery pump. The lubrication pump is operably coupled to the engine, and the variable delivery pump is in communication with a pump output controller that is operable to vary a lubrication fluid output from the variable delivery pump as a function of at least one of engine speed and lubrication flow volume or system pressure. Thus, the lubrication pump can be sized to produce the predetermined flow volume at a speed range at which the engine predominately operates while the variable delivery pump can supplement lubrication fluid delivery from the lubrication pump at engine speeds below the predominant engine speed range.

  19. Models of Procyon A including seismic constraints

    E-Print Network [OSTI]

    P. Eggenberger; F. Carrier; F. Bouchy

    2005-01-14T23:59:59.000Z

    Detailed models of Procyon A based on new asteroseismic measurements by Eggenberger et al (2004) have been computed using the Geneva evolution code including shellular rotation and atomic diffusion. By combining all non-asteroseismic observables now available for Procyon A with these seismological data, we find that the observed mean large spacing of 55.5 +- 0.5 uHz favours a mass of 1.497 M_sol for Procyon A. We also determine the following global parameters of Procyon A: an age of t=1.72 +- 0.30 Gyr, an initial helium mass fraction Y_i=0.290 +- 0.010, a nearly solar initial metallicity (Z/X)_i=0.0234 +- 0.0015 and a mixing-length parameter alpha=1.75 +- 0.40. Moreover, we show that the effects of rotation on the inner structure of the star may be revealed by asteroseismic observations if frequencies can be determined with a high precision. Existing seismological data of Procyon A are unfortunately not accurate enough to really test these differences in the input physics of our models.

  20. Configuration and Validation of the LHC Beam Loss Monitoring System

    E-Print Network [OSTI]

    Zamantzas, C; Emery, J; Fitzek, J; Follin, F; Jackson, S; Kain, V; Kruk, G; Misiowiec, M; Roderick, C; Sapinski, M

    2009-01-01T23:59:59.000Z

    The LHC Beam Loss Monitoring (BLM) system is one of the most complex instrumentation systems deployed in the LHC. As well as protecting the machine, the system is also used as a means of diagnosing machine faults, and providing feedback of losses to the control room and several systems such as the Collimation, the Beam Dump and the Post-Mortem. The system has to transmit and process signals from over 4000 monitors, and has approaching 3 million configurable parameters. This paper describes the types of configuration data needed, the means used to store and deploy all the parameters in such a distributed system and how operators are able to alter the operating parameters of the system, particularly with regard to the loss threshold values. The various security mechanisms put in place, both at the hardware and software level, to avoid accidental or malicious modification of these BLM parameters are also shown for each case.

  1. Configuration and temperature dependence of magnetic damping in spin valves

    SciTech Connect (OSTI)

    Joyeux, X.; Devolder, T.; Kim, Joo-Von; Gomez de la Torre, Y.; Eimer, S.; Chappert, C. [Institut d'Electronique Fondamentale, University Paris-Sud, 91405 Orsay (France); UMR8622, CNRS, University Paris-Sud, 91405 Orsay (France)

    2011-09-15T23:59:59.000Z

    Using vector-analyzer ferromagnetic resonance, we have studied the microwave susceptibility of a Py/Co/Cu/Co/MnIr spin valve over a large temperature range (5-450 K) and as a function of the magnetic configuration. An effective magnetization and Gilbert damping constant of 1.1 T and 0.021, respectively, are found for the permalloy free layer, with no discernible variation in temperature observed for either quantities. In contrast, the pinned layer magnetization is reduced by heating, and the exchange bias collapses near a temperature of 450 K. The ferromagnetic resonance linewidth of the free layer increases by 500 MHz when the layer magnetizations are aligned in antiparallel, which is attributed to a configuration-dependent contribution to the damping from spin pumping effects.

  2. Deep Trek Re-configurable Processor for Data Acquisition (RPDA)

    SciTech Connect (OSTI)

    Bruce Ohme; Michael Johnson

    2009-06-30T23:59:59.000Z

    This report summarizes technical progress achieved during the cooperative research agreement between Honeywell and U.S. Department of Energy to develop a high-temperature Re-configurable Processor for Data Acquisition (RPDA). The RPDA development has incorporated multiple high-temperature (225C) electronic components within a compact co-fired ceramic Multi-Chip-Module (MCM) package. This assembly is suitable for use in down-hole oil and gas applications. The RPDA module is programmable to support a wide range of functionality. Specifically this project has demonstrated functional integrity of the RPDA package and internal components, as well as functional integrity of the RPDA configured to operate as a Multi-Channel Data Acquisition Controller. This report reviews the design considerations, electrical hardware design, MCM package design, considerations for manufacturing assembly, test and screening, and results from prototype assembly and characterization testing.

  3. Neutrinoless double beta decay studied with configuration mixing methods

    E-Print Network [OSTI]

    Tomas R. Rodriguez; Gabriel Martinez-Pinedo

    2010-12-08T23:59:59.000Z

    We study neutrinoless double beta decay of several isotopes with state-of-the-art beyond self-consistent mean field methods to compute the nuclear matrix elements (NME). Generating coordinate method with particle number and angular momentum projection (GCM+PNAMP) is used for finding mother and granddaughter states and evaluating transition operators between different nuclei. We analyze explicitly the role of the deformation, pairing and configuration mixing in the evaluation of the NME.

  4. Electrode assemblies, plasma apparatuses and systems including electrode assemblies, and methods for generating plasma

    DOE Patents [OSTI]

    Kong, Peter C; Grandy, Jon D; Detering, Brent A; Zuck, Larry D

    2013-09-17T23:59:59.000Z

    Electrode assemblies for plasma reactors include a structure or device for constraining an arc endpoint to a selected area or region on an electrode. In some embodiments, the structure or device may comprise one or more insulating members covering a portion of an electrode. In additional embodiments, the structure or device may provide a magnetic field configured to control a location of an arc endpoint on the electrode. Plasma generating modules, apparatus, and systems include such electrode assemblies. Methods for generating a plasma include covering at least a portion of a surface of an electrode with an electrically insulating member to constrain a location of an arc endpoint on the electrode. Additional methods for generating a plasma include generating a magnetic field to constrain a location of an arc endpoint on an electrode.

  5. Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes

    SciTech Connect (OSTI)

    Beach, R.; Burdick, A.

    2014-03-01T23:59:59.000Z

    This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance (Rutkowski, H. Manual D -- Residential Duct Systems, 3rd edition, Version 1.00. Arlington, VA: Air Conditioning Contractors of America, 2009.). IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations (Beach, R., Prahl, D., and Lange, R. CFD Analysis of Flexible Duct Junction Box Design. Golden, CO: National Renewable Energy Laboratory, submitted for publication 2013). These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with four outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.

  6. Relativistic configuration-interaction calculations of the n=3-3 transition energies in highly charged tungsten ions

    SciTech Connect (OSTI)

    Chen, M. H.; Cheng, K. T. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States)

    2011-07-15T23:59:59.000Z

    A large-scale relativistic configuration-interaction calculation of the n=3-3 transition energies for Ne- to Ar-like tungsten is carried out. The calculation is based on the relativistic no-pair Hamiltonian and uses finite B-spline orbitals in a cavity as basis functions. Quantum electrodynamic and mass polarization corrections are also included. Results are compared with other theories and with experiment, and are generally found to be more reliable than previous theoretical predictions.

  7. Software configuration management plan, 241-AY and 241-AZ tank farm MICON automation system

    SciTech Connect (OSTI)

    Hill, L.F.

    1997-10-30T23:59:59.000Z

    This document establishes a Computer Software Configuration Management Plan (CSCM) for controlling software for the MICON Distributed Control System (DCS) located at the 241-AY and 241-AZ Aging Waste Tank Farm facilities in the 200 East Area. The MICON DCS software controls and monitors the instrumentation and equipment associated with plant systems and processes. A CSCM identifies and defines the configuration items in a system (section 3.1), controls the release and change of these items throughout the system life cycle (section 3.2), records and reports the status of configuration items and change requests (section 3.3), and verifies the completeness and correctness of the items (section 3.4). All software development before initial release, or before software is baselined, is considered developmental. This plan does not apply to developmental software. This plan applies to software that has been baselined and released. The MICON software will monitor and control the related instrumentation and equipment of the 241-AY and 241-AZ Tank Farm ventilation systems. Eventually, this software may also assume the monitoring and control of the tank sludge washing equipment and other systems as they are brought on line. This plan applies to the System Cognizant Manager and MICON Cognizant Engineer (who is also referred to herein as the system administrator) responsible for the software/hardware and administration of the MICON system. This document also applies to any other organizations within Tank Farms which are currently active on the system including system cognizant engineers, nuclear operators, technicians, and control room supervisors.

  8. Creating a strategic plan for configuration management using computer aided software engineering (CASE) tools

    SciTech Connect (OSTI)

    Smith, P.R.; Sarfaty, R.

    1993-05-01T23:59:59.000Z

    This paper provides guidance in the definition, documentation, measurement, enhancement of processes, and validation of a strategic plan for configuration management (CM). The approach and methodology used in establishing a strategic plan is the same for any enterprise, including the Department of Energy (DOE), commercial nuclear plants, the Department of Defense (DOD), or large industrial complexes. The principles and techniques presented are used world wide by some of the largest corporations. The authors used industry knowledge and the areas of their current employment to illustrate and provide examples. Developing a strategic configuration and information management plan for DOE Idaho Field Office (DOE-ID) facilities is discussed in this paper. A good knowledge of CM principles is the key to successful strategic planning. This paper will describe and define CM elements, and discuss how CM integrates the facility`s physical configuration, design basis, and documentation. The strategic plan does not need the support of a computer aided software engineering (CASE) tool. However, the use of the CASE tool provides a methodology for consistency in approach, graphics, and database capability combined to form an encyclopedia and a method of presentation that is easily understood and aids the process of reengineering. CASE tools have much more capability than those stated above. Some examples are supporting a joint application development group (JAD) to prepare a software functional specification document and, if necessary, provide the capability to automatically generate software application code. This paper briefly discusses characteristics and capabilities of two CASE tools that use different methodologies to generate similar deliverables.

  9. Mac configuration management at the Los Alamos National Laboratory

    SciTech Connect (OSTI)

    Marcus, Allan B [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    The Los Alamos National Laboratory (LANL) had a need for central configuration management of non-Windows computers. LANL has three to five thousand Macs and an equal number of Linux based systems. The primary goal was to be able to inventory all non-windows systems and patch Mc OS X systems. LANL examined a number of commercial and open source solutions and ultimately selected Puppet. This paper will discuss why we chose Puppet, how we implemented it, and some lessons we learned along the way.

  10. Combining structured and unstructured data in a configurable web-based logbook

    SciTech Connect (OSTI)

    Nogiec, J.; Trombly-Freytag, K.; /Fermilab

    2009-10-01T23:59:59.000Z

    A typical electronic logbook is designed as a general-purpose system for recording time-ordered events and actions and, therefore, allows for a great flexibility in recording information, but the data is unstructured. To better position it in a specific context (e.g., a, test facility, a group activity log) it needs to support both structured data (keyword, authors, etc) and unstructured data (text, title, attachments) in that context. To do this, a logbook system can define a set of attributes, possibly built as a hierarchy. These application-specific attributes will be associated with each entry. To be flexible, such a system has to be configurable to allow for tailoring it to each specific environment. The paper describes a design, functionality, and experiences with WebLog, a database-configurable electronic logbook developed with the J2EE Web technology. Various functional and technical properties of the system are discussed, including views, searches, threads of entries, an automated alerting system as well as integration with other applications.

  11. Steady-state and equilibrium vortex configurations, transitions, and evolution in a mesoscopic superconducting cylinder

    E-Print Network [OSTI]

    Kim, S.; Hu, Chia-Ren; Andrews, MJ.

    2004-01-01T23:59:59.000Z

    that the system passes through nearly metastable intermediate configurations while seeking the final minimum-energy steady state consistent with the square symmetry of the sample. An efficient scheme to determine the equilibrium vortex configuration in a...

  12. Habitat configuration and availability influences the settlement of temperate reef fishes (Tripterygiidae)

    E-Print Network [OSTI]

    Shima, Jeff

    Habitat configuration and availability influences the settlement of temperate reef fishes 29 September 2013 Available online 23 October 2013 Keywords: Attraction vs. production Fragmentation Habitat availability Habitat configuration Settlement Tripterygiidae To survive, most benthic marine

  13. Snowflake divertor configuration studies for NSTX-Upgrade

    SciTech Connect (OSTI)

    Soukhanovskii, V A

    2011-11-12T23:59:59.000Z

    Snowflake divertor experiments in NSTX provide basis for PMI development toward NSTX-Upgrade. Snowflake configuration formation was followed by radiative detachment. Significant reduction of steady-state divertor heat flux observed in snowflake divertor. Impulsive heat loads due to Type I ELMs are partially mitigated in snowflake divertor. Magnetic control of snowflake divertor configuration is being developed. Plasma material interface development is critical for NSTX-U success. Four divertor coils should enable flexibility in boundary shaping and control in NSTX-U. Snowflake divertor experiments in NSTX provide good basis for PMI development in NSTX-Upgrade. FY 2009-2010 snowflake divertor experiments in NSTX: (1) Helped understand control of magnetic properties; (2) Core H-mode confinement unchanged; (3) Core and edge carbon concentration reduced; and (4) Divertor heat flux significantly reduced - (a) Steady-state reduction due to geometry and radiative detachment, (b) Encouraging results for transient heat flux handling, (c) Combined with impurity-seeded radiative divertor. Outlook for snowflake divertor in NSTX-Upgrade: (1) 2D fluid modeling of snowflake divertor properties scaling - (a) Edge and divertor transport, radiation, detachment threshold, (b) Compatibility with cryo-pump and lithium conditioning; (2) Magnetic control development; and (3) PFC development - PFC alignment and PFC material choice.

  14. Electron cyclotron emission spectrometry on the Tokamak a Configuration Variable

    SciTech Connect (OSTI)

    Klimanov, I.; Porte, L.; Alberti, S.; Blanchard, P.; Fasoli, A.; Goodman, T.P. [Centre de Recherches en Physique des Plasmas (CRPP), Association EURATOM-Confederation Suisse, Ecole Polytechnique Federale de Lausanne (EPFL), CH-1015, Lausanne (Switzerland)

    2005-09-15T23:59:59.000Z

    Electron cyclotron emission (ECE) measurements are an important component of the diagnostic suite on the Tokamak a Configuration Variable (TCV) [F. Hoffman et al., Plasma Phys. Controlled Fusion 36, B277 (1994)]. A recently installed, 24-channel dual-conversion heterodyne radiometer covering the radio frequency range 65-100 GHz and viewing from the low-field side (LFS) of the tokamak greatly enhances the system and, in combination with an existing radiometer viewing from the high-field side (HFS), allows simultaneous measurements of emission from the HFS and LFS. In addition, the new radiometer has multiple lines of sight that can receive the emission perpendicular to the toroidal magnetic field as well as with a finite k{sub parallel} (wave vector parallel to magnetic field). Such flexibility allows the LFS radiometer to make standard measurements of thermal emission and nonstandard measurements of nonthermal, anisotropic emission. The toroidal line of sight allows access to overdense plasma via mode converted emission. The enhanced ECE diagnostic is described and examples of measurements made in various configurations are presented.

  15. Cooling Configuration Design Considerations for Long-Length HTS Cables

    SciTech Connect (OSTI)

    Demko, Jonathan A [ORNL; Duckworth, Robert C [ORNL

    2009-01-01T23:59:59.000Z

    Recent successes in demonstrating high temperature superconducting (HTS) cable systems hundreds of meters in length have inspired even longer length projects. A compact and energy efficient cooling configuration can be achieved using a counterflow-cooling arrangement. This is particularly attractive when all three phases are contained in a single cryostat because of the elimination of the space and thermal requirements of a separate liquid nitrogen return line. Future cable projects will utilize second generation (2G) wire which is expected to become lower in cost but may have different thermal requirements than first generation (1G) BSCCO wire due to the lower critical temperature and to a lesser extent, the lower thermal conductivity of the wire. HTS cable configurations will be studied with a numerical model to assess thermal hydraulic performance with AC and thermal losses; a summary of the results from the analysis will be presented. An analysis of the cable thermal- hydraulic response to over-current faults will be presented.

  16. Rotational stability of a long field-reversed configuration

    SciTech Connect (OSTI)

    Barnes, D. C., E-mail: coronadocon@msn.com; Steinhauer, L. C. [Tri Alpha Energy, Rancho Santa Margarita, California 92688 (United States)] [Tri Alpha Energy, Rancho Santa Margarita, California 92688 (United States)

    2014-02-15T23:59:59.000Z

    Rotationally driven modes of long systems with dominantly axial magnetic field are considered. We apply the incompressible model and order axial wavenumber small. A recently developed gyro-viscous model is incorporated. A one-dimensional equilibrium is assumed, but radial profiles are arbitrary. The dominant toroidal (azimuthal) mode numbers ?=1 and ?=2 modes are examined for a variety of non-reversed (B) and reversed profiles. Previous results for both systems with rigid rotor equilibria are reproduced. New results are obtained by incorporation of finite axial wavenumber and by relaxing the assumption of rigid electron and ion rotation. It is shown that the frequently troublesome ?=2 field reversed configuration (FRC) mode is not strongly affected by ion kinetic effects (in contrast to non-reversed cases) and is likely stabilized experimentally only by finite length effects. It is also shown that the ?=1 wobble mode has a complicated behavior and is affected by a variety of configuration and profile effects. The rotationally driven ?=1 wobble is completely stabilized by strong rotational shear, which is anticipated to be active in high performance FRC experiments. Thus, observed wobble modes in these systems are likely not driven by rotation alone.

  17. Particle acceleration in three-dimensional tearing configurations

    E-Print Network [OSTI]

    Christoph Nodes; Guido T. Birk; Harald Lesch; R. Schopper

    2003-01-17T23:59:59.000Z

    In three-dimensional electromagnetic configurations that result from unstable resistive tearing modes particles can efficiently be accelerated to relativistic energies. To prove this resistive magnetohydrodynamic simulations are used as input configurations for successive test particle simulations. The simulations show the capability of three-dimensional non-linearly evolved tearing modes to accelerate particles perpendicular to the plane of the reconnecting magnetic field components. The simulations differ considerably from analytical approaches by involving a realistic three-dimensional electric field with a non-homogenous component parallel to the current direction. The resulting particle spectra exhibit strong pitch-angle anisotropies. Typically, about 5-8 % of an initially Maxwellian distribution is accelerated to the maximum energy levels given by the macroscopic generalized electric potential structure. Results are shown for both, non-relativistic particle acceleration that is of interest, e.g., in the context of auroral arcs and solar flares, and relativistic particle energization that is relevant, e.g., in the context of active galactic nuclei.

  18. Measuring the configurational temperature of a binary disc packing

    E-Print Network [OSTI]

    Song-Chuan Zhao; Matthias Schrter

    2014-06-20T23:59:59.000Z

    Jammed packings of granular materials differ from systems normally described by statistical mechanics in that they are athermal. In recent years a statistical mechanics of static granular media has emerged where the thermodynamic temperature is replaced by a configurational temperature X which describes how the number of mechanically stable configurations depends on the volume. Four different methods have been suggested to measure X. Three of them are computed from properties of the Voronoi volume distribution, the fourth takes into account the contact number and the global volume fraction. This paper answers two questions using experimental binary disc packings: First we test if the four methods to measure compactivity provide identical results when applied to the same dataset. We find that only two of the methods agree quantitatively. Secondly, we test if X is indeed an intensive variable; this becomes true only for samples larger than roughly 200 particles. This result is shown to be due to recently found correlations between the particle volumes [Zhao et al., Europhys. Lett., 2012, 97, 34004].

  19. Path Planning in Expansive Configuration Spaces David Hsu JeanClaude Latombe Rajeev Motwani

    E-Print Network [OSTI]

    Pratt, Vaughan

    be effectively captured by a roadmap of randomlysampled milestones. The analysis of expansive configuration of precomputing a roadmap for the entire configuration space. Thus, it is wellsuited for problems where only in [12], uses random sampling to construct a probabilistic roadmap in the configuration space

  20. Path Planning in Expansive Configuration Spaces David Hsu JeanClaude Latombe Rajeev Motwani

    E-Print Network [OSTI]

    Pratt, Vaughan

    whose connectivity can be effectively captured by a roadmap of randomlysampled milestones. The analysis, avoiding the cost of precomputing a roadmap for the entire configuration space. Thus, it is well a roadmap of the configuration space and tries to find a path between any two input configurations

  1. Can the wave function in configuration space be replaced by single-particle wave functions in physical space?

    E-Print Network [OSTI]

    Travis Norsen; Damiano Marian; Xavier Oriols

    2014-10-14T23:59:59.000Z

    The ontology of Bohmian mechanics includes both the universal wave function (living in 3N-dimensional configuration space) and particles (living in ordinary 3-dimensional physical space). Proposals for understanding the physical significance of the wave function in this theory have included the idea of regarding it as a physically-real field in its 3N-dimensional space, as well as the idea of regarding it as a law of nature. Here we introduce and explore a third possibility in which the configuration space wave function is simply eliminated -- replaced by a set of single-particle pilot-wave fields living in ordinary physical space. Such a re-formulation of the Bohmian pilot-wave theory can exactly reproduce the statistical predictions of ordinary quantum theory. But this comes at the rather high ontological price of introducing an infinite network of interacting potential fields (living in 3-dimensional space) which influence the particles' motion through the pilot-wave fields. We thus introduce an alternative approach which aims at achieving empirical adequacy (like that enjoyed by GRW type theories) with a more modest ontological complexity, and provide some preliminary evidence for optimism regarding the (once popular but prematurely-abandoned) program of trying to replace the (philosophically puzzling) configuration space wave function with a (totally unproblematic) set of fields in ordinary physical space.

  2. Tube vibration in industrial size test heat exchanger (30/sup 0/ triangular layout - six crosspass configuration)

    SciTech Connect (OSTI)

    Wambsganss, M.W.; Halle, H.; Lawrence, W.P.

    1981-10-01T23:59:59.000Z

    Tube vibrations in heat exchangers are being systematically studied in a series of tests performed with an industrial-size test exchanger. Results from flow tests of nine different tube bundles, in a basic 5-baffle, 6-crosspass configuration on a 30/sup 0/-triangular layout with a pitch-to-diameter ratio of 1.25, are reported. the test cases include a full tube bundle, no-tubes-in-window bundle, finned tube bundle, and several proposed field fixes. The testing focused on identification of the lowest critical flowrate to initiate fluidelastic instability (large amplitude tube motion) and the location within the bundle of the tubes which first experience instability. The threshold flowrates are determined from a combination of methods based on sensory observations, vibration amplitude data, and frequency response information. Pressure drop data are also generated and reported.

  3. Baseline LHC machine parameters and configuration of the 2015 proton run

    E-Print Network [OSTI]

    R. Bruce; G. Arduini; S. Fartoukh; M. Giovannozzi; M. Lamont; E. Metral; T. Pieloni; S. Redaelli; J. Wenninger

    2014-10-22T23:59:59.000Z

    This paper shows the baseline LHC machine parameters for the 2015 start-up. Many systems have been upgraded during LS1 and in 2015 the LHC will operate at a higher energy than before and with a tighter filling scheme. Therefore, the 2015 commissioning phase risks to be less smooth than in 2012. The proposed starting configuration puts the focus on feasibility rather than peak performance and includes margins for operational uncertainties. Instead, once beam experience and a better machine knowledge has been obtained, a push in $\\beta^*$ and performance can be envisaged. In this paper, the focus is on collimation settings and reach in $\\beta^*$---other parameters are covered in greater depth by other papers in these proceedings.

  4. Physics and Engineering Assessments ?of the K-DEMO Magnet Configuration

    SciTech Connect (OSTI)

    Neilson, George H. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Brown, Thomas [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States)

    2014-09-01T23:59:59.000Z

    Increased attention is being given now to studies of next-step fusion facilities with nuclear missions. Among these, South Korea's K DEMO is unique in its focus on a high toroidal magnetic field, large major radius, steady-state tokamak design for the core of a facility to test fusion nuclear components in Phase I and, after upgrades, produce 500 MW of electricity in a Phase II. Innovative features of the K DEMO magnet set include the use of two toroidal field (TF) coil winding packs with conductor grading and a machine configuration designed for vertical maintenance. The magnet arrangement features large TF coils and widelyspaced poloidal field (PF) coils to accommodate removal of in-vessel components as large modules. Physics and engineering assessments of the pre-conceptual K-DEMO magnet configuration are reported, including: 1) design point and operating space assessment, 2) conductor assessment, and 3) structural assessment. It is found that a reference design point at 6.8 m major radius and 7.4 T toroidal field provides sufficient operating margins for the 500 MWe Phase II mission. Analyses of candidate cable-in-conduit conductors provide predictions of critical current degradation, both in the initial load cycle and an additionally with cyclic loading. A first-pass global analysis of the magnet system found minimal out-of-plane deformations of the TF coil, but an overstress condition in the inner leg of the TF coil. However an analysis taking into account elastic-plastic behavior, frictional sliding, and displacement shows that the structure can safely carry the load. Although the design evolution is still at an early stage, these assessments support the design point choices to date and the expectation that a feasible solution for the high-field K DEMO magnet system can be found.

  5. Ionization detector, electrode configuration and single polarity charge detection method

    DOE Patents [OSTI]

    He, Zhong (Ann Arbor, MI)

    1998-01-01T23:59:59.000Z

    An ionization detector, an electrode configuration and a single polarity charge detection method each utilize a boundary electrode which symmetrically surrounds first and second central interlaced and symmetrical electrodes. All of the electrodes are held at a voltage potential of a first polarity type. The first central electrode is held at a higher potential than the second central or boundary electrodes. By forming the first and second central electrodes in a substantially interlaced and symmetrical pattern and forming the boundary electrode symmetrically about the first and second central electrodes, signals generated by charge carriers are substantially of equal strength with respect to both of the central electrodes. The only significant difference in measured signal strength occurs when the charge carriers move to within close proximity of the first central electrode and are received at the first central electrode. The measured signals are then subtracted and compared to quantitatively measure the magnitude of the charge.

  6. Ionization detector, electrode configuration and single polarity charge detection method

    DOE Patents [OSTI]

    He, Z.

    1998-07-07T23:59:59.000Z

    An ionization detector, an electrode configuration and a single polarity charge detection method each utilize a boundary electrode which symmetrically surrounds first and second central interlaced and symmetrical electrodes. All of the electrodes are held at a voltage potential of a first polarity type. The first central electrode is held at a higher potential than the second central or boundary electrodes. By forming the first and second central electrodes in a substantially interlaced and symmetrical pattern and forming the boundary electrode symmetrically about the first and second central electrodes, signals generated by charge carriers are substantially of equal strength with respect to both of the central electrodes. The only significant difference in measured signal strength occurs when the charge carriers move to within close proximity of the first central electrode and are received at the first central electrode. The measured signals are then subtracted and compared to quantitatively measure the magnitude of the charge. 10 figs.

  7. Generally covariant quantum mechanics on noncommutative configuration spaces

    SciTech Connect (OSTI)

    Kopf, Tomas; Paschke, Mario [Mathematical Institute, Silesian University, Na Rybnicku 1, 74601 Opava (Czech Republic); Institut fuer Mathematik, Einsteinstrasse 62, 48149 Muenster (Germany)

    2007-11-15T23:59:59.000Z

    We generalize the previously given algebraic version of 'Feynman's proof of Maxwell's equations' to noncommutative configuration spaces. By doing so, we also obtain an axiomatic formulation of nonrelativistic quantum mechanics over such spaces, which, in contrast to most examples discussed in the literature, does not rely on a distinguished set of coordinates. We give a detailed account of several examples, e.g., C{sup {infinity}}(Q)xM{sub n}(C) which leads to non-Abelian Yang-Mills theories, and of noncommutative tori T{sub {theta}}{sup d}. Moreover, we examine models over the Moyal-deformed plane R{sub {theta}}{sup 2}. Assuming the conservation of electrical charges, we show that in this case the canonical uncertainty relation [x{sub k},x{sub l}]=ig{sub kl} with metric g{sub kl} is only consistent if g{sub kl} is constant.

  8. 2-D Stellar Evolution Code Including Arbitrary Magnetic Fields. I. Mathematical Techniques and Test Cases

    E-Print Network [OSTI]

    L. H. Li; P. Ventura; S. Basu; S. Sofia; P. Demarque

    2006-01-27T23:59:59.000Z

    A high-precision two-dimensional stellar evolution code has been developed for studying solar variability due to structural changes produced by varying internal magnetic fields of arbitrary configurations. Specifically, we are interested in modeling the effects of a dynamo-type field on the detailed internal structure and on the global parameters of the Sun. The high precision is required both to model very small solar changes (of order of $10^{-4}$) and short time scales (or order of one year). It is accomplished by using the mass coordinate to replace the radial coordinate, by using fixed and adjustable time steps, a realistic stellar atmosphere, elements diffusion, and by adjusting the grid points. We have also built into the code the potential to subsequently include rotation and turbulence. The current code has been tested for several cases, including its ability to reproduce the 1-D results.

  9. Microwave-emitting rotor, separator apparatus including same, methods of operation and design thereof

    DOE Patents [OSTI]

    Meikrantz, David H.

    2006-12-19T23:59:59.000Z

    An apparatus for use in separating, at least in part, a mixture, including at least one chamber and at least one microwave generation device configured for communicating microwave energy into the at least one chamber is disclosed. The rotor assembly may comprise an electric generator for generating electricity for operating the microwave generation device. At least one microwave generation device may be positioned within a tubular interior shaft extending within the rotor assembly. At least a portion of the tubular interior shaft may be substantially transparent to microwave energy. Microwave energy may be emitted in an outward radial direction or toward an anticipated boundary surface defined between a mixture and a separated constituent thereof. A method including flowing a mixture through at least one chamber and communicating microwave energy into the at least one chamber while rotating same is disclosed. Methods of operating a centrifugal separator and design thereof are disclosed.

  10. Structures including network and topology for identifying, locating and quantifying physical phenomena

    DOE Patents [OSTI]

    Richardson, John G.; Moore, Karen A.; Carrington, Robert A.

    2006-04-25T23:59:59.000Z

    A method and system for detecting, locating and quantifying a physical phenomena such as strain or a deformation in a structure. A plurality of laterally adjacent conductors may each include a plurality of segments. Each segment is constructed to exhibit a unit value representative of a defined energy transmission characteristic. A plurality of identity groups are defined with each identity group comprising a plurality of segments including at least one segment from each of the plurality of conductors. The segments contained within an identity group are configured and arranged such that each of their associated unit values may be represented by a concatenated digit string which is a unique number relative to the other identity groups. Additionally, the unit values of the segments within an identity group maintain unique ratios with respect to the other unit values in the identity group.

  11. Pipeline including network and topology for identifying, locating and quantifying physical phenomena

    DOE Patents [OSTI]

    Richardson, John G.; Moore, Karen A.; Carrington, Robert A.

    2006-02-14T23:59:59.000Z

    A method and system for detecting, locating and quantifying a physical phenomena such as strain or a deformation in a structure. A plurality of laterally adjacent conductors may each include a plurality of segments. Each segment is constructed to exhibit a unit value representative of a defined energy transmission characteristic. A plurality of identity groups are defined with each identity group comprising a plurality of segments including at least one segment from each of the plurality of conductors. The segments contained within an identity group are configured and arranged such that each of their associated unit values may be represented by a concatenated digit string which is a unique number relative to the other identity groups. Additionally, the unit values of the segments within an identity group maintain unique ratios with respect to the other unit values in the identity group.

  12. Dye lasing arrangement including an optical assembly for altering the cross-section of its pumping beam and method

    DOE Patents [OSTI]

    O'Neil, Richard W. (Pleasanton, CA); Sweatt, William C. (Alburquerque, NM)

    1992-01-01T23:59:59.000Z

    An optical assembly is disclosed herein along with a method of operation for use in a dye lasing arrangement, for example a dye laser oscillator or a dye amplifier, in which a continuous stream of dye is caused to flow through a given zone in a cooperating dye chamber while the zone is being illuminated by light from a pumping beam which is directed into the given zone. This in turn causes the dye therein to lase and thereby produce a new dye beam in the case of a dye laser oscillator or amplify a dye beam in the case of a dye amplifier. The optical assembly so disclosed is designed to alter the pump beam such that the beam enters the dye chamber with a different cross-sectional configuration, preferably one having a more uniform intensity profile, than its initially produced cross-sectional configuration. To this end, the assembly includes a network of optical components which first act on the beam while the latter retains its initially produced cross-sectional configuration for separating it into a plurality of predetermined segments and then recombines the separated components in a predetermined way which causes the recombined beam to have the different cross-sectional configuration.

  13. Shape evolution and shape coexistence in Pt isotopes: comparing interacting boson model configuration mixing and Gogny mean-field energy surfaces

    E-Print Network [OSTI]

    J. E. Garcia-Ramos; K. Heyde; L. M. Robledo; R. Rodriguez-Guzman

    2014-02-26T23:59:59.000Z

    The evolution of the total energy surface and the nuclear shape in the isotopic chain $^{172-194}$Pt are studied in the framework of the interacting boson model, including configuration mixing. The results are compared with a self-consistent Hartree-Fock-Bogoliubov calculation using the Gogny-D1S interaction and a good agreement between both approaches shows up. The evolution of the deformation parameters points towards the presence of two different coexisting configurations in the region 176 $\\leq$ A $\\leq$ 186.

  14. application specific configuration: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    recurrence satisfied by the Stirling numbers of the second kind. Abrams, Aaron; Hower, Valerie 2010-01-01 277 Theme 7: Transport (including Aeronautics) Guide for...

  15. Utilization of Minor Actinides as a Fuel Component for Ultra-Long Life Bhr Configurations: Designs, Advantages and Limitations

    SciTech Connect (OSTI)

    Dr. Pavel V. Tsvetkov

    2009-05-20T23:59:59.000Z

    This project assessed the advantages and limitations of using minor actinides as a fuel component to achieve ultra-long life Very High Temperature Reactor (VHTR) configurations. Researchers considered and compared the capabilities of pebble-bed and prismatic core designs with advanced actinide fuels to achieve ultra-long operation without refueling. Since both core designs permit flexibility in component configuration, fuel utilization, and fuel management, it is possible to improve fissile properties of minor actinides by neutron spectrum shifting through configuration adjustments. The project studied advanced actinide fuels, which could reduce the long-term radio-toxicity and heat load of high-level waste sent to a geologic repository and enable recovery of the energy contained in spent fuel. The ultra-long core life autonomous approach may reduce the technical need for additional repositories and is capable to improve marketability of the Generation IV VHTR by allowing worldwide deployment, including remote regions and regions with limited industrial resources. Utilization of minor actinides in nuclear reactors facilitates developments of new fuel cycles towards sustainable nuclear energy scenarios.

  16. Two-dimensional interpreter for field-reversed configurations

    SciTech Connect (OSTI)

    Steinhauer, Loren, E-mail: lstein@uw.edu [Tri Alpha Energy, Rancho Santa Margarita, California 92688 (United States)

    2014-08-15T23:59:59.000Z

    An interpretive method is developed for extracting details of the fully two-dimensional (2D) internal structure of field-reversed configurations (FRC) from common diagnostics. The challenge is that only external and gross diagnostics are routinely available in FRC experiments. Inferring such critical quantities as the poloidal flux and the particle inventory has commonly relied on a theoretical construct based on a quasi-one-dimensional approximation. Such inferences sometimes differ markedly from the more accurate, fully 2D reconstructions of equilibria. An interpreter based on a fully 2D reconstruction is needed to enable realistic within-the-shot tracking of evolving equilibrium properties. Presented here is a flexible equilibrium reconstruction with which an extensive data base of equilibria was constructed. An automated interpreter then uses this data base as a look-up table to extract evolving properties. This tool is applied to data from the FRC facility at Tri Alpha Energy. It yields surprising results at several points, such as the inferences that the local ? (plasma pressure/external magnetic pressure) of the plasma climbs well above unity and the poloidal flux loss time is somewhat longer than previously thought, both of which arise from full two-dimensionality of FRCs.

  17. Stationary Nonaxisymmetric Configurations of Magnetized Singular Isothermal Disks

    E-Print Network [OSTI]

    Yu-qing Lou

    2003-01-01T23:59:59.000Z

    Accepted.... Received...; in original form... We construct both aligned and unaligned (logarithmic spiral) stationary configurations of nonaxisymmetric magnetohydrodynamic (MHD) disks from either a full or a partial razor-thin power-law axisymmetric magnetized singular isothermal disk (MSID) that is embedded with a coplanar azimuthal magnetic field B? of a non-force-free radial scaling r?1/2 and that rotates differentially with a flat rotation curve of speed aD, where a is the isothermal sound speed and D is the dimensionless rotation parameter. Analytical solutions and stability criteria for determining D2 are derived. For aligned nonaxisymmetric MSIDs, eccentric m = 1 displacements may occur at arbitrary D2 in a full MSID but are allowed only with a2D2 = C2 A /2 in a partial MSID (CA is the Alfvn speed), while each case of |m | ? 1 gives two possible values of D2 for purely azimuthal propagations of fast and slow MHD density waves (FMDWs and SMDWs) that appear stationary in an inertial frame of reference. For disk galaxies modeled by a partial MSID resulting from a massive dark-matter halo with a flat rotation curve and a2D2 ? C2 A, stationary aligned perturbations of m = 1 are not allowed. For

  18. The magnetic configuration of a delta-spot

    E-Print Network [OSTI]

    Balthasar, Horst; Louis, Rohan E; Verma, Meetu; Denker, Carsten

    2013-01-01T23:59:59.000Z

    Sunspots, which harbor both magnetic polarities within one penumbra, are called delta-spots. They are often associated with flares. Nevertheless, there are only very few detailed observations of the spatially resolved magnetic field configuration. We present an investigation performed with the Tenerife Infrared Polarimeter at the Vacuum Tower Telescope in Tenerife. We observed a sunspot with a main umbra and several additional umbral cores, one of them with opposite magnetic polarity (the delta-umbra). The delta-spot is divided into two parts by a line along which central emissions of the spectral line Ca II 854.2 nm appear. The Evershed flow comming from the main umbra ends at this line. In deep photospheric layers, we find an almost vertical magnetic field for the delta-umbra, and the magnetic field decreases rapidly with height, faster than in the main umbra. The horizontal magnetic field in the direction connecting main and delta-umbra is rather smooth, but in one location next to a bright penumbral featu...

  19. Fusion proton diagnostic for the C-2 field reversed configuration

    SciTech Connect (OSTI)

    Magee, R. M., E-mail: rmagee@trialphaenergy.com; Clary, R.; Korepanov, S.; Smirnov, A.; Garate, E.; Knapp, K. [Tri Alpha Energy, Inc., Rancho Santa Margarita, California 92688 (United States); Tkachev, A. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation)

    2014-11-15T23:59:59.000Z

    Measurements of the flux of fusion products from high temperature plasmas provide valuable insights into the ion energy distribution, as the fusion reaction rate is a very sensitive function of ion energy. In C-2, where field reversed configuration plasmas are formed by the collision of two compact toroids and partially sustained by high power neutral beam injection [M. Binderbauer et al., Phys. Rev. Lett. 105, 045003 (2010); M. Tuszewski et al., Phys. Rev. Lett. 108, 255008 (2012)], measurements of DD fusion neutron flux are used to diagnose ion temperature and study fast ion confinement and dynamics. In this paper, we will describe the development of a new 3 MeV proton detector that will complement existing neutron detectors. The detector is a large area (50?cm{sup 2}), partially depleted, ion implanted silicon diode operated in a pulse counting regime. While the scintillator-based neutron detectors allow for high time resolution measurements (?100 kHz), they have no spatial or energy resolution. The proton detector will provide 10 cm spatial resolution, allowing us to determine if the axial distribution of fast ions is consistent with classical fast ion theory or whether anomalous scattering mechanisms are active. We will describe in detail the diagnostic design and present initial data from a neutral beam test chamber.

  20. A new configurational bias scheme for sampling supramolecular structures

    E-Print Network [OSTI]

    Robin De Gernier; Tine Curk; Galina V. Dubacheva; Ralf P. Richter; Bortolo M. Mognetti

    2014-12-09T23:59:59.000Z

    We present a new simulation scheme which allows an efficient sampling of reconfigurable supramolecular structures made of polymeric constructs functionalized by reactive binding sites. The algorithm is based on the configurational bias scheme of Siepmann and Frenkel and is powered by the possibility of changing the topology of the supramolecular network by a non-local Monte Carlo algorithm. Such plan is accomplished by a multi-scale modelling that merges coarse-grained simulations, describing the typical polymer conformations, with experimental results accounting for free energy terms involved in the reactions of the active sites. We test the new algorithm for a system of DNA coated colloids for which we compute the hybridisation free energy cost associated to the binding of tethered single stranded DNAs terminated by short sequences of complementary nucleotides. In order to demonstrate the versatility of our method, we also consider polymers functionalized by receptors that bind a surface decorated by ligands. In particular we compute the density of states of adsorbed polymers as a function of the number of ligand-receptor complexes formed. Such a quantity can be used to study the conformational properties of adsorbed polymers useful when engineering adsorption with tailored properties. We successfully compare the results with the predictions of a mean field theory. We believe that the proposed method will be a useful tool to investigate supramolecular structures resulting from direct interactions between functionalized polymers for which efficient numerical methodologies of investigation are still lacking.

  1. Verification of gyrokinetic microstability codes ?with an LHD configuration

    SciTech Connect (OSTI)

    Mikkelsen, D. R. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Nunami, M. [National Inst. for Fusion Science (Japan); Watanabe, T. -H. [Nagoya Univ. (Japan); Sugama, H. [National Inst. for Fusion Science (Japan); Tanaka, K. [National Inst. for Fusion Science (Japan)

    2014-11-01T23:59:59.000Z

    We extend previous benchmarks of the GS2 and GKV-X codes to verify their algorithms for solving the gyrokinetic Vlasov-Poisson equations for plasma microturbulence. Code benchmarks are the most complete way of verifying the correctness of implementations for the solution of mathematical models for complex physical processes such as those studied here. The linear stability calculations reported here are based on the plasma conditions of an ion-ITB plasma in the LHD configuration. The plasma parameters and the magnetic geometry differ from previous benchmarks involving these codes. We find excellent agreement between the independently written pre-processors that calculate the geometrical coefficients used in the gyrokinetic equations. Grid convergence tests are used to establish the resolution and domain size needed to obtain converged linear stability results. The agreement of the frequencies, growth rates and eigenfunctions in the benchmarks reported here provides additional verification that the algorithms used by the GS2 and GKV-X codes are correctly finding the linear eigenvalues and eigenfunctions of the gyrokinetic Vlasov-Poisson equations.

  2. Nuclear Arms Control R&D Consortium includes Los Alamos

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Arms Control R&D Consortium includes Los Alamos Nuclear Arms Control R&D Consortium includes Los Alamos A consortium led by the University of Michigan that includes LANL as...

  3. A Roadmap to Success: Hiring, Retaining, and Including People...

    Broader source: Energy.gov (indexed) [DOE]

    A Roadmap to Success: Hiring, Retaining, and Including People with Disabilities A Roadmap to Success: Hiring, Retaining, and Including People with Disabilities December 5, 2014...

  4. [Article 1 of 7: Motivates and Includes the Consumer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and include the consumer exist. Some examples include advanced two-way metering (AMI), demand response (DR), and distributed energy resources (DER). A common misconception is...

  5. Including Retro-Commissioning in Federal Energy Savings Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Including Retro-Commissioning in Federal Energy Savings Performance Contracts Including Retro-Commissioning in Federal Energy Savings Performance Contracts Document describes...

  6. Investigations into the Nature of Halogen Bonding Including Symmetry...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    into the Nature of Halogen Bonding Including Symmetry Adapted Perturbation Theory Analyses. Investigations into the Nature of Halogen Bonding Including Symmetry Adapted...

  7. Dependence of effective internal field of congruent lithium niobate on its domain configuration and stability

    SciTech Connect (OSTI)

    Das, Ranjit, E-mail: ranjitdas.in@gmail.com, E-mail: souvik2cat@gmail.com, E-mail: srirajib@yahoo.com; Ghosh, Souvik, E-mail: ranjitdas.in@gmail.com, E-mail: souvik2cat@gmail.com, E-mail: srirajib@yahoo.com; Chakraborty, Rajib, E-mail: ranjitdas.in@gmail.com, E-mail: souvik2cat@gmail.com, E-mail: srirajib@yahoo.com [Department of Applied Optics and Photonics, University of Calcutta, JD-2, Sector III, Salt Lake, Kolkata 700098 (India)

    2014-06-28T23:59:59.000Z

    Congruent lithium niobate is characterized by its internal field, which arises due to defect clusters within the crystal. Here, it is shown experimentally that this internal field is a function of the molecular configuration in a particular domain and also on the stability of that particular configuration. The measurements of internal field are done using interferometric technique, while the variation of domain configuration is brought about by room temperature high voltage electric field poling.

  8. Optical fiber configurations for transmission of laser energy over great distances

    DOE Patents [OSTI]

    Rinzler, Charles C; Zediker, Mark S

    2013-10-29T23:59:59.000Z

    There are provided optical fiber configurations that provide for the delivery of laser energy, and in particular, the transmission and delivery of high power laser energy over great distances. These configurations further are hardened to protect the optical fibers from the stresses and conditions of an intended application. The configurations provide means for determining the additional fiber length (AFL) need to obtain the benefits of such additional fiber, while avoiding bending losses.

  9. Optical fiber configurations for transmission of laser energy over great distances

    DOE Patents [OSTI]

    Rinzler, Charles C; Zediker, Mark S

    2014-11-04T23:59:59.000Z

    There are provided optical fiber configurations that provide for the delivery of laser energy, and in particular, the transmission and delivery of high power laser energy over great distances. These configurations further are hardened to protect the optical fibers from the stresses and conditions of an intended application. The configurations provide means for determining the additional fiber length (AFL) need to obtain the benefits of such additional fiber, while avoiding bending losses.

  10. Facility Configuration Study of the High Temperature Gas-Cooled Reactor Component Test Facility

    SciTech Connect (OSTI)

    S. L. Austad; L. E. Guillen; D. S. Ferguson; B. L. Blakely; D. M. Pace; D. Lopez; J. D. Zolynski; B. L. Cowley; V. J. Balls; E.A. Harvego, P.E.; C.W. McKnight, P.E.; R.S. Stewart; B.D. Christensen

    2008-04-01T23:59:59.000Z

    A test facility, referred to as the High Temperature Gas-Cooled Reactor Component Test Facility or CTF, will be sited at Idaho National Laboratory for the purposes of supporting development of high temperature gas thermal-hydraulic technologies (helium, helium-Nitrogen, CO2, etc.) as applied in heat transport and heat transfer applications in High Temperature Gas-Cooled Reactors. Such applications include, but are not limited to: primary coolant; secondary coolant; intermediate, secondary, and tertiary heat transfer; and demonstration of processes requiring high temperatures such as hydrogen production. The facility will initially support completion of the Next Generation Nuclear Plant. It will secondarily be open for use by the full range of suppliers, end-users, facilitators, government laboratories, and others in the domestic and international community supporting the development and application of High Temperature Gas-Cooled Reactor technology. This pre-conceptual facility configuration study, which forms the basis for a cost estimate to support CTF scoping and planning, accomplishes the following objectives: Identifies pre-conceptual design requirements Develops test loop equipment schematics and layout Identifies space allocations for each of the facility functions, as required Develops a pre-conceptual site layout including transportation, parking and support structures, and railway systems Identifies pre-conceptual utility and support system needs Establishes pre-conceptual electrical one-line drawings and schedule for development of power needs.

  11. MAP, MAC, and Vortex-rings Configurations in the Weinberg-Salam Model

    E-Print Network [OSTI]

    Rosy Teh; Ban-Loong Ng; Khai-Ming Wong

    2015-03-20T23:59:59.000Z

    We report on the presence of new axially symmetric monopoles, antimonopoles and vortex-rings solutions of the SU(2)$\\times$U(1) Weinberg-Salam model of electromagnetic and weak interactions. When the $\\phi$-winding number $n=1$, and 2, the configurations are monopole-antimonopole pair (MAP) and monopole-antimonopole chain (MAC) with poles of alternating sign magnetic charge arranged along the $z$-axis. Vortex-rings start to appear from the MAP and MAC configurations when the winding number $n=3$. The MAP configurations possess zero net magnetic charge whereas the MAC configurations possess net magnetic charge of $4\\pi n/e$. In the MAP configurations, the monopole-antimonopole pair is bounded by the ${\\cal Z}^0$ field flux string and there is an electromagnetic current loop encircling it. The monopole and antimonopole possess magnetic charges $\\pm\\frac{4\\pi n}{e}\\sin^2\\theta_W$ respectively. In the MAC configurations there is no string connecting the monopole and the adjacent antimonopole and they possess magnetic charges $\\pm\\frac{4\\pi n}{e}$ respectively. The MAC configurations possess infinite total energy and zero magnetic dipole moment whereas the MAP configurations which are actually sphalerons possess finite total energy and magnetic dipole moment. The configurations were investigated for varying values of Higgs self-coupling constant $0\\leq \\lambda\\leq 40$ at Weinberg angle $\\theta_W=\\frac{\\pi}{4}$.

  12. A novel electron gun for inline MRI-linac configurations

    SciTech Connect (OSTI)

    Constantin, Drago? E., E-mail: dragos.constantin@varian.com; Fahrig, Rebecca [Department of Radiology, Stanford University, Stanford, California 94305 (United States)] [Department of Radiology, Stanford University, Stanford, California 94305 (United States); Holloway, Lois [Liverpool and Macarthur Cancer Therapy Centres, The University of Sydney, NSW 2006 (Australia)] [Liverpool and Macarthur Cancer Therapy Centres, The University of Sydney, NSW 2006 (Australia); Keall, Paul J. [Radiation Physics Laboratory, The University of Sydney, NSW 2006 (Australia)] [Radiation Physics Laboratory, The University of Sydney, NSW 2006 (Australia)

    2014-02-15T23:59:59.000Z

    Purpose: This work introduces a new electron gun geometry capable of robust functioning in the presence of a high strength external magnetic field for axisymmetric magnetic resonance imaging (MRI)-linac configurations. This allows an inline MRI-linac to operate without the need to isolate the linear accelerator (linac) using a magnetic shield. This MRI-linac integration approach not only leaves the magnet homogeneity unchanged but also provides the linac flexibility to move along the magnet axis of symmetry if the source to target distance needs to be adjusted. Methods: Simple electron gun geometry modifications of a Varian 600C electron gun are considered and solved in the presence of an external magnetic field in order to determine a set of design principles for the new geometry. Based on these results, a new gun geometry is proposed and optimized in the fringe field of a 0.5 T open bore MRI magnet (GE Signa SP). A computer model for the 6 MeV Varian 600C linac is used to determine the capture efficiency of the new electron gun-linac system in the presence of the fringe field of the same MRI scanner. The behavior of the new electron gun plus the linac system is also studied in the fringe fields of two other magnets, a 1.0 T prototype open bore magnet and a 1.5 T GE Conquest scanner. Results: Simple geometrical modifications of the original electron gun geometry do not provide feasible solutions. However, these tests show that a smaller transverse cathode diameter with a flat surface and a slightly larger anode diameter could alleviate the current loss due to beam interactions with the anode in the presence of magnetic fields. Based on these findings, an initial geometry resembling a parallel plate capacitor with a hole in the anode is proposed. The optimization procedure finds a cathode-anode distance of 5 mm, a focusing electrode angle of 5, and an anode drift tube length of 17.1 mm. Also, the linac can be displaced with 15 cm along the axis of the 0.5 T magnet without capture efficiency reduction below the experimental value in zero field. In this range of linac displacements, the electron beam generated by the new gun geometry is more effectively injected into the linac in the presence of an external magnetic field, resulting in approximately 20% increase of the target current compared to the original gun geometry behavior at zero field. The new gun geometry can generate and accelerate electron beams in external magnetic fields without current loss for fields higher than 0.11 T. The new electron-gun geometry is robust enough to function in the fringe fields of the other two magnets with a target current loss of no more than 16% with respect to the current obtained with no external magnetic fields. Conclusions: In this work, a specially designed electron gun was presented which can operate in the presence of axisymmetric strong magnetic fringe fields of MRI magnets. Computer simulations show that the electron gun can produce high quality beams which can be injected into a straight through linac such as Varian 600C and accelerated with more efficiency in the presence of the external magnetic fields. Also, the new configuration allows linac displacements along the magnet axis in a range equal to the diameter of the imaging spherical volume of the magnet under consideration. The new electron gun-linac system can function in the fringe field of a MRI magnet if the field strength at the cathode position is higher than 0.11 T. The capture efficiency of the linac depends on the magnetic field strength and the field gradient. The higher the gradient the better the capture efficiency. The capture efficiency does not degrade more than 16%.

  13. Comparative analysis of peat gasification reactor configuration. Final report

    SciTech Connect (OSTI)

    Not Available

    1981-07-01T23:59:59.000Z

    This report summarizes the comparative analysis of two generic gasifiers (fluidized bed and entrained bed) and two specific hydrogasifiers (IGT's Peat-gas and Rockwell International's hydrogasifier). The objective is to establish a basis for recommending a peat gasification reactor configuration for testing in a DOE peat gasification pilot plant project. The approach involved the following four steps: data base evaluation, regression analysis, a chemical engineering evaluation of upstream and downstream equipment requirement, and computer simulation. Mathematical models and computer programs were developed to simulate the entrained-bed and fluidized-bed reactors. Parametric analyses were made, using these computer programs, to test the sensitivity and effects of significant operating variables (temperature, pressure and feed gas composition, for instance) on the product gas composition in the IGT gasifier and Rockwell International gasifier. This review and analysis concentrates primarily upon the Peatgas process of the Institute of Gas Technology and the Rockwell International Hydrogasification Process. The two-stage Peatgas process appears to have advantages in higher thermal efficiency, smaller capital investment, and its application of existing commercial operations and proven design practices from other types of fluidized solids processing units. There are two problems concerning operability of the Peatgas process: (1) the design of a fluidized solids unit for quite low standpipe densities (approximately 11 to 15 pounds per cubic foot), which may become even lower upon operating upsets, and (2) the potential problem of ash sintering in the very hot combustion zone of the steam-oxygen gasifier. On a relative time scale of development, the Peatgas would seem to be much closer to possible early commercialization than is the Rockwell system.

  14. Power plant including an exhaust gas recirculation system for injecting recirculated exhaust gases in the fuel and compressed air of a gas turbine engine

    DOE Patents [OSTI]

    Anand, Ashok Kumar; Nagarjuna Reddy, Thirumala Reddy; Shaffer, Jason Brian; York, William David

    2014-05-13T23:59:59.000Z

    A power plant is provided and includes a gas turbine engine having a combustor in which compressed gas and fuel are mixed and combusted, first and second supply lines respectively coupled to the combustor and respectively configured to supply the compressed gas and the fuel to the combustor and an exhaust gas recirculation (EGR) system to re-circulate exhaust gas produced by the gas turbine engine toward the combustor. The EGR system is coupled to the first and second supply lines and configured to combine first and second portions of the re-circulated exhaust gas with the compressed gas and the fuel at the first and second supply lines, respectively.

  15. Stack configurations for tubular solid oxide fuel cells

    DOE Patents [OSTI]

    Armstrong, Timothy R. (Clinton, TN); Trammell, Michael P. (Clinton, TN); Marasco, Joseph A. (Kingston, TN)

    2010-08-31T23:59:59.000Z

    A fuel cell unit includes an array of solid oxide fuel cell tubes having porous metallic exterior surfaces, interior fuel cell layers, and interior surfaces, each of the tubes having at least one open end; and, at least one header in operable communication with the array of solid oxide fuel cell tubes for directing a first reactive gas into contact with the porous metallic exterior surfaces and for directing a second reactive gas into contact with the interior surfaces, the header further including at least one busbar disposed in electrical contact with at least one surface selected from the group consisting of the porous metallic exterior surfaces and the interior surfaces.

  16. Content-addressable memory based enforcement of configurable policies

    SciTech Connect (OSTI)

    Berg, Michael J

    2014-05-06T23:59:59.000Z

    A monitoring device for monitoring transactions on a bus includes content-addressable memory ("CAM") and a response policy unit. The CAM includes an input coupled to receive a bus transaction tag based on bus traffic on the bus. The CAM stores data tags associated with rules of a security policy to compare the bus transaction tag to the data tags. The CAM generates an output signal indicating whether one or more matches occurred. The response policy unit is coupled to the CAM to receive the output signal from the CAM and to execute a policy action in response to the output signal.

  17. High thermal conductivity lossy dielectric using a multi layer configuration

    DOE Patents [OSTI]

    Tiegs, Terry N. (Lenoir City, TN); Kiggans, Jr., James O. (Oak Ridge, TN)

    2003-01-01T23:59:59.000Z

    Systems and methods are described for loss dielectrics. A loss dielectric includes at least one high dielectric loss layer and at least one high thermal conductivity-electrically insulating layer adjacent the at least one high dielectric loss layer. A method of manufacturing a loss dielectric includes providing at least one high dielectric loss layer and providing at least one high thermal conductivity-electrically insulating layer adjacent the at least one high dielectric loss layer. The systems and methods provide advantages because the loss dielectrics are less costly and more environmentally friendly than the available alternatives.

  18. Fusion Engineering and Design 81 (2006) 11591168 Major integration issues in evolving the configuration design

    E-Print Network [OSTI]

    Raffray, A. Ren

    2006-01-01T23:59:59.000Z

    the configuration design space for the ARIES-CS compact stellarator power plant A.R. Raffraya,, S. Malangb, L. El an attractive power plant concept based on a compact stellarator configuration. The first phase of the study and the irregular cross-section of the plasma and in-reactor components. Earlier stellarator power plant studies led

  19. Methodologies for PVC Configuration in Heterogeneous ATM Environments Using Intelligent Mobile Agents

    E-Print Network [OSTI]

    White, Tony

    Methodologies for PVC Configuration in Heterogeneous ATM Environments Using Intelligent Mobile; Methodologies for PVC Configuration in Heterogeneous ATM Environments Using Intelligent Mobile Agents John Boyer by individual ATM switch vendors has created an environment where there is no uniform method for PVC

  20. OPTIMAL CONFIGURATION OF A COMMAND AND CONTROL NETWORK: BALANCING PERFORMANCE AND RECONFIGURATION CONSTRAINTS

    SciTech Connect (OSTI)

    L. DOWELL

    1999-08-01T23:59:59.000Z

    The optimization of the configuration of communications and control networks is important for assuring the reliability and performance of the networks. This paper presents techniques for determining the optimal configuration for such a network in the presence of communication and connectivity constraints. reconfiguration to restore connectivity to a data-fusion network following the failure of a network component.

  1. Enhancement of nonlocal spin-valve signal using spin accumulation in local spin-valve configuration

    E-Print Network [OSTI]

    Otani, Yoshichika

    Enhancement of nonlocal spin-valve signal using spin accumulation in local spin-valve configuration) We propose a nonlocal spin-valve measurement combined with a local spin-valve structure to enlarge spin signal. The probe configuration consists of a lateral spin valve with three NiFe wires bridged

  2. Exploiting the Impact of Database System Configuration Parameters: A Design of Experiments Approach

    E-Print Network [OSTI]

    Minnesota, University of

    in determining DBMS performance. However, the number of configuration parameters in a DBMS is very large may have no or marginal effects on the DBMS performance for the given query workload. Database of input parameters. Second, we exploit the estimated effects to: 1) rank DBMS configuration parameters

  3. A field-reversed magnetic configuration and applications of high-temperature FRC plasma

    SciTech Connect (OSTI)

    Ryzhkov, S. V., E-mail: ryzhkov@power.bmstu.ru [Bauman Moscow State Technical University (Russian Federation)

    2011-12-15T23:59:59.000Z

    As applied to a tokomak, a magnetic trap for confinement of a plasma with an inverted field or a magnetic field reversed configuration (FRC) is one of the most promising alternatives of the systems with high {beta}. A brief review of the latest data on FRC and potential directions of using such configurations in addition to energy generation in thermonuclear reactors (TNRs) is proposed.

  4. MOTION EFFECT MODELING IN MULTIPATH CONFIGURATION USING WARPING BASED LAG-DOPPLER FILTERING

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    MOTION EFFECT MODELING IN MULTIPATH CONFIGURATION USING WARPING BASED LAG-DOPPLER FILTERING Nicolas be defined for all possible velocities and time delays of the configuration [3]. Recently, the Doppler effect. Traditionally, the time delay and Doppler effects are analyzed by the ambiguity function. If the signal

  5. Spheromak merging and field reversed configuration formation at the Swarthmore Spheromak Experimenta...

    E-Print Network [OSTI]

    Brown, Michael R.

    Spheromak merging and field reversed configuration formation at the Swarthmore Spheromak- and counter-helicity spheromak merging studies at the Swarthmore Spheromak Experiment SSX M. R. Brown, Phys configuration FRC formation and stability by counter-helicity spheromak merging. A pair of midplane coils

  6. acid analysis including: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nairn, John A. 12 A bottom-up analysis of including aviation within theEU's Emissions Trading Scheme Geosciences Websites Summary: A bottom-up analysis of including aviation...

  7. analysis including quantification: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ausloos 2004-12-31 29 A bottom-up analysis of including aviation within theEU's Emissions Trading Scheme Geosciences Websites Summary: A bottom-up analysis of including aviation...

  8. Biomarkers Core Lab Price List Does NOT Include

    E-Print Network [OSTI]

    Grishok, Alla

    v3102014 Biomarkers Core Lab Price List Does NOT Include Kit Cost PURCHASED by INVESTIGATOR/1/2013 Page 1 of 5 #12;Biomarkers Core Lab Price List Does NOT Include Kit Cost PURCHASED by INVESTIGATOR

  9. Example Retro-Commissioning Scope of Work to Include Services...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retro-Commissioning Scope of Work to Include Services as Part of an ESPC Investment-Grade Audit Example Retro-Commissioning Scope of Work to Include Services as Part of an ESPC...

  10. Microelectromechanical accelerometer with resonance-cancelling control circuit including an idle state

    DOE Patents [OSTI]

    Chu, Dahlon D. (Albuquerque, NM); Thelen, Jr., Donald C. (Bozeman, MT); Campbell, David V. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A digital feedback control circuit is disclosed for use in an accelerometer (e.g. a microelectromechanical accelerometer). The digital feedback control circuit, which periodically re-centers a proof mass in response to a sensed acceleration, is based on a sigma-delta (.SIGMA..DELTA.) configuration that includes a notch filter (e.g. a digital switched-capacitor filter) for rejecting signals due to mechanical resonances of the proof mass and further includes a comparator (e.g. a three-level comparator). The comparator generates one of three possible feedback states, with two of the feedback states acting to re-center the proof mass when that is needed, and with a third feedback state being an "idle" state which does not act to move the proof mass when no re-centering is needed. Additionally, the digital feedback control system includes an auto-zero trim capability for calibration of the accelerometer for accurate sensing of acceleration. The digital feedback control circuit can be fabricated using complementary metal-oxide semiconductor (CMOS) technology, bi-CMOS technology or bipolar technology and used in single- and dual-proof-mass accelerometers.

  11. Process For Controlling Flow Rate Of Viscous Materials Including Use Of Nozzle With Changeable Openings

    DOE Patents [OSTI]

    Ellingson, William A. (Naperville, IL); Forster, George A. (Westmont, IL)

    1999-11-02T23:59:59.000Z

    Apparatus and a method for controlling the flow rate of viscous materials through a nozzle includes an apertured main body and an apertured end cap coupled together and having an elongated, linear flow channel extending the length thereof. An end of the main body is disposed within the end cap and includes a plurality of elongated slots concentrically disposed about and aligned with the flow channel. A generally flat cam plate having a center aperture is disposed between the main body and end cap and is rotatable about the flow channel. A plurality of flow control vane assemblies are concentrically disposed about the flow channel and are coupled to the cam plate. Each vane assembly includes a vane element disposed adjacent the end of the flow channel. Rotation of the cam plate in a first direction causes a corresponding rotation of each of the vane elements for positioning the individual vane elements over the aperture in the end cap blocking flow through the flow channel, while rotation in an opposite direction removes the vane elements from the aperture and positions them about the flow channel in a nested configuration in the full open position, with a continuous range of vane element positions available between the full open and closed positions.

  12. Heat-Of-Reaction Chemical Heat Pumps--Possible Configurations

    E-Print Network [OSTI]

    Kirol, L. D.

    for water and gas connections, and temperature variations. Recent work on heat pump cycles using complex compound reactions includes development of energy storage systems at laboratories in Europe (11) and the United States (12), and residential...ABSTRACT Chemical heat pumps utilize working fluids which undergo reversible chemical changes. Mechanically driven reactive heat pump cycles or, alternatively, hl~a: driven heat pumps in which either heat engine or heat pump working fluid...

  13. Nuclear lattice model and the electronic configuration of the chemical elements

    E-Print Network [OSTI]

    Jozsef Garai

    2015-07-07T23:59:59.000Z

    The fundamental organizing principle resulting in the periodic table is the nuclear charge. Arranging the chemical elements in an increasing atomic number order, a symmetry pattern known as the Periodic Table is detectable. The correlation between nuclear charge and the Periodic System of the Chemical Elements (PSCE) indicates that the symmetry emerges from the nucleus. Nuclear symmetry can only exist if the relative positions of the nucleons in the nucleus are invariant. Pauli exclusion principle can also be interpreted as the nucleons should occupy a lattice position. Based on symmetry and other indicatives face centered cubic arrangement have been proposed for the nuclear lattice. A lattice model, representing the protons and the neutrons by equal spheres and arranging them alternately in a face centered cubic structure forming a double tetrahedron, is able to reproduce all of the properties of the nucleus including the quantum numbers and the periodicity of the elements. Based on the geometry of the nuclear structure it is shown that when a new 'layer' of the nuclear structure starts then the distance between the first proton in the new layer and the charge center of the nucleus is smaller than the distance of the proton, which completed the preceding 'layer'. Thus a new valence electron shell should start to develop when the nuclear structure is expanded. The expansion of the double tetrahedron FCC nuclear lattice model offers a feasible physical explanation how the nucleus affects the electronic configuration of the chemical elements depicted by the periodic table.

  14. Langmuir probe diagnostic suite in the C-2 field-reversed configuration

    SciTech Connect (OSTI)

    Roche, T., E-mail: troche@trialphaenergy.com; Armstrong, S.; Knapp, K.; Slepchenkov, M. [Tri Alpha Energy Inc., PO Box 7010, Rancho Santa Margarita, California 92688 (United States); Sun, X. [Department of Modern Physics, University of Science and Technology of China, Hefei Anhui 230026 (China)

    2014-11-15T23:59:59.000Z

    Several in situ probes have been designed and implemented into the diagnostic array of the C-2 field-reversed configuration (FRC) at Tri Alpha Energy [M. Tuszewski et al. (the TAE Team), Phys. Rev. Lett. 108, 255008 (2012)]. The probes are all variations on the traditional Langmuir probe. They include linear arrays of triple probes, linear arrays of single-tipped swept probes, a multi-faced Gundestrup probe, and an ion-sensitive probe. The probes vary from 5 to 7 mm diameter in size to minimize plasma perturbations. They also have boron nitride outer casings that prevent unwanted electrical breakdown and reduce the introduction of impurities. The probes are mounted on motorized linear-actuators allowing for programmatic scans of the various plasma parameters over the course of several shots. Each probe has a custom set of electronics that allows for measurement of the desired signals. High frequency ( > 5MHz) analog optical-isolators ensure that plasma parameters can be measured at sub-microsecond time scales while providing electrical isolation between machine and data acquisition systems. With these probes time-resolved plasma parameters (temperature, density, spatial potential, flow, and electric field) can be directly/locally measured in the FRC jet and edge/scrape-off layer.

  15. Relativistic configuration-interaction calculation of energy levels of core-excited states in lithium-like ions: argon through krypton

    E-Print Network [OSTI]

    Yerokhin, V A

    2012-01-01T23:59:59.000Z

    Large-scale relativistic configuration-interaction calculation of energy levels of core-excited states of lithium-like ions is presented. Quantum electrodynamic, nuclear recoil, and frequency-dependent Breit corrections are included in the calculation. The approach is consistently applied for calculating all $n=2$ core-excited states for all lithium-like ions starting from argon ($Z = 18$) and ending with krypton ($Z = 36$). The results obtained are supplemented with systematical estimations of calculation errors and omitted effects.

  16. Immobilized low-level waste disposal options configuration study

    SciTech Connect (OSTI)

    Mitchell, D.E.

    1995-02-01T23:59:59.000Z

    This report compiles information that supports the eventual conceptual and definitive design of a disposal facility for immobilized low-level waste. The report includes the results of a joint Westinghouse/Fluor Daniel Inc. evaluation of trade-offs for glass manufacturing and product (waste form) disposal. Though recommendations for the preferred manufacturing and disposal option for low-level waste are outside the scope of this document, relative ranking as applied to facility complexity, safety, remote operation concepts and ease of retrieval are addressed.

  17. Magnetic levitation configuration incorporating levitation, guidance and linear synchronous motor

    DOE Patents [OSTI]

    Coffey, H.T.

    1993-10-19T23:59:59.000Z

    A propulsion and suspension system for an inductive repulsion type magnetically levitated vehicle which is propelled and suspended by a system which includes propulsion windings which form a linear synchronous motor and conductive guideways, adjacent to the propulsion windings, where both combine to partially encircling the vehicle-borne superconducting magnets. A three phase power source is used with the linear synchronous motor to produce a traveling magnetic wave which in conjunction with the magnets propel the vehicle. The conductive guideway combines with the superconducting magnets to provide for vehicle levitation. 3 figures.

  18. Magnetic levitation configuration incorporating levitation, guidance and linear synchronous motor

    DOE Patents [OSTI]

    Coffey, Howard T. (Darien, IL)

    1993-01-01T23:59:59.000Z

    A propulsion and suspension system for an inductive repulsion type magnetically levitated vehicle which is propelled and suspended by a system which includes propulsion windings which form a linear synchronous motor and conductive guideways, adjacent to the propulsion windings, where both combine to partially encircling the vehicle-borne superconducting magnets. A three phase power source is used with the linear synchronous motor to produce a traveling magnetic wave which in conjunction with the magnets propel the vehicle. The conductive guideway combines with the superconducting magnets to provide for vehicle leviation.

  19. Introduction to Small-Scale Wind Energy Systems (Including RETScreen...

    Open Energy Info (EERE)

    Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case Study) (Webinar) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Introduction to Small-Scale...

  20. Laboratory Curiosity rover ChemCam team, including Los Alamos...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MEXICO, August 23, 2012-Members of the Mars Science Laboratory Curiosity rover ChemCam team, including Los Alamos National Laboratory scientists, squeezed in a little extra target...

  1. PLOT: A UNIX PROGRAM FOR INCLUDING GRAPHICS IN DOCUMENTS

    E-Print Network [OSTI]

    Curtis, Pavel

    2013-01-01T23:59:59.000Z

    simple, easy-to-read graphics language designed specificallyPROGRAM FOR INCLUDING GRAPHICS IN DOCUMENTS Pavel Curtismeanings as in the GRAFPAC graphics system. Definl. ~ tions

  2. analysis including plasma: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Assembly 2010 Space Plasmas in the Solar System, including Planetary Magnetospheres (D) Solar Variability, Cosmic Rays and Climate (D21) GEOMAGNETIC ACTIVITY AT HIGH-LATITUDE:...

  3. Energy Department Expands Gas Gouging Reporting System to Include...

    Energy Savers [EERE]

    Washington, DC - Energy Secretary Samuel W. Bodman announced today that the Department of Energy has expanded its gas gouging reporting system to include a toll-free telephone...

  4. arch dams including: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Websites Summary: insight into the gamut of shallow water waves, including kinematic, diffusion, dynamic, and gravity wavesDam-Breach Flood Wave Propagation Using...

  5. Spectroscopy and intruder configurations of $^{33}$Mg and $^{31}$Ne studied with antisymmetrized molecular dynamics

    E-Print Network [OSTI]

    M. Kimura

    2011-05-17T23:59:59.000Z

    Excitation spectra and neutron single particle configurations of $^{33}$Mg and $^{31}$Ne are investigated by using antisymmetrized molecular dynamics combined with generator coordinate method. It is shown that both nuclei have strongly deformed $3/2^-$ ground state with a $3p2h$ configuration. The excitation spectra are qualitatively understood in terms of the Nilsson model and the calculation has shown the coexistence of different intruder configurations within small excitation energy. The calculated one neutron separation energy of $^{31}$Ne is rather small ($S_n=250$ keV) and implies a p-wave one neutron halo with a strongly deformed core.

  6. Configuration management for mission-critical software: the Los Alamos solution

    SciTech Connect (OSTI)

    Cort, G.; Barrus, D.M.

    1984-01-01T23:59:59.000Z

    In this paper we present our experiences as a small group responsible for the development of a moderately large real-time data acquisition system. During the early stages of our project we recognized the need for a rigorous software configuration management system to support our development and maintenance activities. This paper describes our approach to the utilization of the Softool Change and Configuration Control (CCC) environment. The steps that we have taken to develop a very powerful development/configuration management environment (incorporating CCC) are outlined and justified. The extension of the Los Alamos system to management of large-scale projects is discussed.

  7. NPIP: A skew line needle configuration optimization system for HDR brachytherapy

    SciTech Connect (OSTI)

    Siauw, Timmy; Cunha, Adam; Berenson, Dmitry; Atamtuerk, Alper; Hsu, I-Chow; Goldberg, Ken; Pouliot, Jean [Department of Civil and Environmental Engineering, University of California, Berkeley, 760 Davis Hall, Berkeley, California 94720-1710 (United States); Department of Radiation Oncology, University of California, San Francisco, Comprehensive Cancer Center, 1600 Divisadero Street, Suite H1031, San Francisco, California 94143-1708 (United States); Department of Electrical Engineering and Computer Science, University of California, Berkeley, 4th Floor Sutardja Dai Hall, Berkeley, California 94720-1764 (United States); Department of Industrial Engineering and Operations, University of California, Berkeley, 4141 Etcheverry Hall, Berkeley, California 94720-1777 (United States); Department of Radiation Oncology, University of California, San Francisco, Comprehensive Cancer Center, 1600 Divisadero Street, Suite H1031, San Francisco, California 94143-1708 (United States); Department of Industrial Engineering and Operations Research and Department of Electrical Engineering and Computer Science, University of California, Berkeley, 4141 Etcheverry Hall, Berkeley, California 94720-1777 (United States); Department of Radiation Oncology, University of California, San Francisco, Comprehensive Cancer Center, 1600 Divisadero Street, Suite H1031, San Francisco, California 94143-1708 (United States)

    2012-07-15T23:59:59.000Z

    Purpose: In this study, the authors introduce skew line needle configurations for high dose rate (HDR) brachytherapy and needle planning by integer program (NPIP), a computational method for generating these configurations. NPIP generates needle configurations that are specific to the anatomy of the patient, avoid critical structures near the penile bulb and other healthy structures, and avoid needle collisions inside the body. Methods: NPIP consisted of three major components: a method for generating a set of candidate needles, a needle selection component that chose a candidate needle subset to be inserted, and a dose planner for verifying that the final needle configuration could meet dose objectives. NPIP was used to compute needle configurations for prostate cancer data sets from patients previously treated at our clinic. NPIP took two user-parameters: a number of candidate needles, and needle coverage radius, {delta}. The candidate needle set consisted of 5000 needles, and a range of {delta} values was used to compute different needle configurations for each patient. Dose plans were computed for each needle configuration. The number of needles generated and dosimetry were analyzed and compared to the physician implant. Results: NPIP computed at least one needle configuration for every patient that met dose objectives, avoided healthy structures and needle collisions, and used as many or fewer needles than standard practice. These needle configurations corresponded to a narrow range of {delta} values, which could be used as default values if this system is used in practice. The average end-to-end runtime for this implementation of NPIP was 286 s, but there was a wide variation from case to case. Conclusions: The authors have shown that NPIP can automatically generate skew line needle configurations with the aforementioned properties, and that given the correct input parameters, NPIP can generate needle configurations which meet dose objectives and use as many or fewer needles than the current HDR brachytherapy workflow. Combined with robot assisted brachytherapy, this system has the potential to reduce side effects associated with treatment. A physical trial should be done to test the implant feasibility of NPIP needle configurations.

  8. Articles which include chevron film cooling holes, and related processes

    DOE Patents [OSTI]

    Bunker, Ronald Scott; Lacy, Benjamin Paul

    2014-12-09T23:59:59.000Z

    An article is described, including an inner surface which can be exposed to a first fluid; an inlet; and an outer surface spaced from the inner surface, which can be exposed to a hotter second fluid. The article further includes at least one row or other pattern of passage holes. Each passage hole includes an inlet bore extending through the substrate from the inlet at the inner surface to a passage hole-exit proximate to the outer surface, with the inlet bore terminating in a chevron outlet adjacent the hole-exit. The chevron outlet includes a pair of wing troughs having a common surface region between them. The common surface region includes a valley which is adjacent the hole-exit; and a plateau adjacent the valley. The article can be an airfoil. Related methods for preparing the passage holes are also described.

  9. New protection method for HVDC lines including cables

    SciTech Connect (OSTI)

    Takeda, H.; Ayakawa, H.; Tsumenaga, N.; Sanpei, M.

    1995-10-01T23:59:59.000Z

    For the third project of the Hokkaido-Honshu HVDC Link in Japan, called the HVDC Link III project (rated at 250 kVdc-1,200 A-300 MW), the authors developed an HVDC transmission line protection method based on a new working principle that allows high-speed and highly sensitive detection of faults, enhancing reliability in the supply of electric power. In general, increasing the sensitivity of relays will lead to an increased likelihood of undesired operation whereas lowering the sensitivity will impair the responsiveness of the relays. The proposed method meets these apparently incompatible requirements very well. Basically classified as a differential scheme, the HVDC transmission line protection method compensates for a charging and discharging current that flows through the line-to-ground capacitance at times of voltage variations caused by a line fault or by the operation of dc power systems. The developed protection method is also characterized in that it uses current changes induced by voltage variations to restrain the operation of a relay. This configuration has made the proposed method far superior in responsiveness and sensitivity to the conventional protection method. A simulation using an EMTP (Electro-Magnetic Transients Program) was conducted on this method. Developed relay equipment embodying the new protection method was subjected to various verification tests, where this equipment was connected to a power system simulator, before being delivered to the HVDC Link III facility.

  10. Analysis of flexure pivot tilting pad gas bearings with different damper configurations

    E-Print Network [OSTI]

    Rimpel, Aaron Michael

    2009-05-15T23:59:59.000Z

    Hydrodynamic flexure pivot tilting pad gas bearings (FPTPGBs) can enable successful operation of oil-free microturbomachinery. This work presents the experimental and analytical study of such bearings with different damper configurations. A test rig...

  11. DISCRETIZED CONFIGURATIONS AND PARTIAL AARON ABRAMS, DAVID GAY, AND VALERIE HOWER

    E-Print Network [OSTI]

    Abrams, Aaron

    DISCRETIZED CONFIGURATIONS AND PARTIAL PARTITIONS AARON ABRAMS, DAVID GAY, AND VALERIE HOWER to have the homotopy type of a wedge of spheres [2]. 1 #12;2 AARON ABRAMS, DAVID GAY, AND VALERIE HOWER

  12. Configurable Dynamic Privacy for Pervasive Sensor Networks Nan-Wei Gong

    E-Print Network [OSTI]

    1 Configurable Dynamic Privacy for Pervasive Sensor Networks by Nan-Wei Gong Submitted Privacy for Pervasive Sensor Networks by Nan-Wei Gong Submitted to the Program in Media Arts and Sciences

  13. Design of a cluster analysis heuristic for the configuration and capacity management of manufacturing cells

    E-Print Network [OSTI]

    Shim, Young Hak

    2007-09-17T23:59:59.000Z

    , the machine capacity was first ensured, and then manufacturing cells were configured to minimize intercellular movements. In order to ensure the machine capacity, the duplication of machines and the split of operations are allowed and operations are assigned...

  14. Venture Capitalists' Decision to Withdraw: The Role of Portfolio Configuration From a Real Options Lens

    E-Print Network [OSTI]

    Li, Yong; Chi, Tailan

    2012-01-01T23:59:59.000Z

    When does a venture capital firm withdraw from an investment project prior to its completion? This study offers a real options view on this decision by examining the contingent effects of portfolio configuration. We explore how project withdrawal...

  15. UNIVERSITY OF CALIFORNIA, SAN DIEGO Configurable Energy-efficient Co-processors to Scale the

    E-Print Network [OSTI]

    UNIVERSITY OF CALIFORNIA, SAN DIEGO Configurable Energy-efficient Co-processors to Scale . . . . . . . . . . . . . . . . 18 Chapter 3 Patchable Conservation Cores: Energy-efficient circuits with processor-like lifetimes

  16. Computations of temperature profiles in spheromak configurations with open field lines Carl Sovinec

    E-Print Network [OSTI]

    Sovinec, Carl

    Computations of temperature profiles in spheromak configurations with open field lines Carl Sovinec 10/27/00 The NIMROD zero- spheromak simulation results have mostly open field lines for parameters

  17. LS-266 OPTIMIZATION OF FOUR-BUTTON BEAM POSITION MONITOR CONFIGURATION...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LS-266 OPTIMIZATION OF FOUR-BUTTON BEAM POSITION MONITOR CONFIGURATION FOR SMALL-GAP VACUUM CHAMBERS S. H. Kim March 27, 1998 Summary - Induced charges on a four-button beam...

  18. Beyond the Rainbow: Self-Adaptive Failure Avoidance in Configurable Systems

    E-Print Network [OSTI]

    Cohen, Myra

    Beyond the Rainbow: Self-Adaptive Failure Avoidance in Configurable Systems Jacob Swanson, Myra B and that copies bear this notice and the full citation on the first page. To copy otherwise, to republish, to post

  19. Configuration and Heating Power Dependence of Edge Parameters and H-mode Dynamics in National Spherical Torus Experiment (NSTX)

    SciTech Connect (OSTI)

    C.E. Bush; M.G. Bell; R.E. Bell; J. Boedo; E.D. Fredrickson; S.M. Kaye; S. Kubota; B.P. LeBlanc; R. Maingi; R.J. Maqueda; S.A. Sabbagh; V.A. Soukhanovskii; D. Stutman; D.W. Swain; J.B. Wilgen; S.J. Zweben; W.M. Davis; D.A. Gates; D.W. Johnson; R. Kaita; H.W. Kugel; D. Mastrovito; S. Medley; J.E. Menard; D. Mueller; M. Ono; F. Paoletti; S.J. Paul; Y-K.M. Peng; R. Raman; P.G. Roney; A.L. Roquemore; C.H. Skinner; E.J. Synakowski; G. Taylor; the NSTX Team

    2003-01-09T23:59:59.000Z

    Edge parameters play a critical role in H-mode (high-confinement mode) access, which is a key component of plasma discharge optimization in present-day toroidal confinement experiments and the design of next-generation devices. Because the edge magnetic topology of a spherical torus (ST) differs from a conventional aspect ratio tokamak, H-modes in STs exhibit important differences compared with tokamaks. The dependence of the NSTX (National Spherical Torus Experiment) edge plasma on heating power, including the L-H transition requirements and the occurrence of edge-localized modes (ELMs), and on divertor configuration is quantified. Comparisons between good L-modes (low-confinement modes) and H-modes show greater differences in the ion channel than the electron channel. The threshold power for the H-mode transition in NSTX is generally above the predictions of a recent ITER (International Thermonuclear Experimental Reactor) scaling. Correlations of transition and ELM phenomena with turbulent fluctuations revealed by Gas Puff Imaging (GPI) and reflectometry are observed. In both single-null and double-null divertor discharges, the density peaks off-axis, sometimes developing prominent ''ears'' which can be sustained for many energy confinement times, tau subscript ''E'', in the absence of ELMs. A wide variety of ELM behavior is observed, and ELM characteristics depend on configuration and fueling.

  20. Evaluation of tire pressure, tire construction, axle configuration, and axle load on flexible pavement performance

    E-Print Network [OSTI]

    Jamy, Ahmad Najeeb

    1991-01-01T23:59:59.000Z

    EVALUATION OF TIRE PRESSURE, TIRE CONSTRUCTION, AXLE CONFIGURATION, AND AXLE LOAD ON FLEXIBLE PAVEMENT PERFORMANCE A Thesis by AHMAD NAJEEB JAMY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE August 1991 Major Subject: Civil Engineering EVALUATION OF TIRE PRESSURE, TIRE CONSTRUCTION, AXLE CONFIGURATION, AND AXLE LOAD ON FLEXIBLE PAVEMENT PERFORMANCE. A Thesis by AHMAD NAJEEB JAMY Approved...

  1. Classical limits of quantum mechanics on a non-commutative configuration space

    SciTech Connect (OSTI)

    Benatti, Fabio [Department of Physics, University of Trieste and INFN, Sezione di Trieste, Strada Costiera 11, I-34051 Trieste (Italy)] [Department of Physics, University of Trieste and INFN, Sezione di Trieste, Strada Costiera 11, I-34051 Trieste (Italy); Gouba, Laure [The Abdus Salam International Centre for Theoretical Physics (ICTP), Strada Costiera 11, I-34151 Trieste (Italy)] [The Abdus Salam International Centre for Theoretical Physics (ICTP), Strada Costiera 11, I-34151 Trieste (Italy)

    2013-06-15T23:59:59.000Z

    We consider a model of non-commutative quantum mechanics given by two harmonic oscillators over a non-commutative two dimensional configuration space. We study possible ways of removing the non-commutativity based on the classical limit context known as anti-Wick quantization. We show that removal of non-commutativity from the configuration space and from the canonical operators is not commuting operation.

  2. A multi-reactor configuration for multi-megawatt spacecraft power supplies

    E-Print Network [OSTI]

    George, Jeffrey Alan

    1989-01-01T23:59:59.000Z

    capacity may be required for round trip missions. Mission analyses were carried out for an unmanned Mars Cargo Mission and compared with both single reactor and conventional chemical rocket concepts. Interplanetary trajectories utilizing throttled... ABSTRACT ACKNOWLEDGEMENT TABLE OF CONTENTS LIST OF FIGURES LIST OF TABLES CHAPTER I. INTRODUCTION II. MULTI-REACTOR CONFIGURATIONS III. THE HYDRA MULTI-REACTOR CONFIGURATION IV. HYDRA SYSTEM ANALYSIS V, MARS CARGO MISSION ANALYSIS VI, CONCLUSIONS...

  3. Performance monitoring for new phase dynamic optimization of instruction dispatch cluster configuration

    DOE Patents [OSTI]

    Balasubramonian, Rajeev (Sandy, UT); Dwarkadas, Sandhya (Rochester, NY); Albonesi, David (Ithaca, NY)

    2012-01-24T23:59:59.000Z

    In a processor having multiple clusters which operate in parallel, the number of clusters in use can be varied dynamically. At the start of each program phase, the configuration option for an interval is run to determine the optimal configuration, which is used until the next phase change is detected. The optimum instruction interval is determined by starting with a minimum interval and doubling it until a low stability factor is reached.

  4. Turbomachine injection nozzle including a coolant delivery system

    DOE Patents [OSTI]

    Zuo, Baifang (Simpsonville, SC)

    2012-02-14T23:59:59.000Z

    An injection nozzle for a turbomachine includes a main body having a first end portion that extends to a second end portion defining an exterior wall having an outer surface. A plurality of fluid delivery tubes extend through the main body. Each of the plurality of fluid delivery tubes includes a first fluid inlet for receiving a first fluid, a second fluid inlet for receiving a second fluid and an outlet. The injection nozzle further includes a coolant delivery system arranged within the main body. The coolant delivery system guides a coolant along at least one of a portion of the exterior wall and around the plurality of fluid delivery tubes.

  5. Hydrocarbon reforming catalyst material and configuration of the same

    DOE Patents [OSTI]

    Singh, P.; Shockling, L.A.; George, R.A.; Basel, R.A.

    1996-06-18T23:59:59.000Z

    A hydrocarbon reforming catalyst material comprising a catalyst support impregnated with catalyst is provided for reforming hydrocarbon fuel gases in an electrochemical generator. Elongated electrochemical cells convert the fuel to electrical power in the presence of an oxidant, after which the spent fuel is recirculated and combined with a fresh hydrocarbon feed fuel forming the reformable gas mixture which is fed to a reforming chamber containing a reforming catalyst material, where the reforming catalyst material includes discrete passageways integrally formed along the length of the catalyst support in the direction of reformable gas flow. The spent fuel and/or combusted exhaust gases discharged from the generator chamber transfer heat to the catalyst support, which in turn transfers heat to the reformable gas and to the catalyst, preferably via a number of discrete passageways disposed adjacent one another in the reforming catalyst support. The passageways can be slots extending inwardly from an outer surface of the support body, which slots are partly defined by an exterior confining wall. According to a preferred embodiment, the catalyst support is non-rigid, porous, fibrous alumina, wherein the fibers are substantially unsintered and compressible, and the reforming catalyst support is impregnated, at least in the discrete passageways with Ni and MgO, and has a number of internal slot passageways for reformable gas, the slot passageways being partly closed by a containing outer wall. 5 figs.

  6. THE ATMOSPHERE IN Basic Climatology

    E-Print Network [OSTI]

    Sectoral Applications Research Project #12;Factor 1: Our Energy Source Hi, I'm the Sun! I provide 99.9999+ percent of the energy that drives the Earth's weather and climate patterns. In other words, I pretty much intense) vs. oblique (less intense) energy Equator Less direct energy: Colder temps! Less direct energy

  7. Basic Climatology Colorado Climate Center

    E-Print Network [OSTI]

    have normals? People adjust their practices (ag, water resources, etc.) based on recent history Normals are exactly that: recent history About a generation of history, to be exact Normals are a good diagnostic tool to put events in perspective Normals are a great planning tool (again: agriculture, water

  8. Configuration-dependent electronic and magnetic properties of graphene monolayers and nanoribbons functionalized with aryl groups

    SciTech Connect (OSTI)

    Tian, Xiaoqing, E-mail: xqtian2008@gmail.com; Gu, Juan [College of Physics and Technology, Shenzhen University, Shenzhen 518060, Guangdong (China)] [College of Physics and Technology, Shenzhen University, Shenzhen 518060, Guangdong (China); Xu, Jian-bin, E-mail: jbxu@ee.cuhk.edu.hk [Department of Electronic Engineering and Materials Science and Technology Research Center, The Chinese University of Hong Kong, Shatin, New Territories (Hong Kong)] [Department of Electronic Engineering and Materials Science and Technology Research Center, The Chinese University of Hong Kong, Shatin, New Territories (Hong Kong)

    2014-01-28T23:59:59.000Z

    Graphene monolayers functionalized with aryl groups exhibit configuration-dependent electronic and magnetic properties. The aryl groups were adsorbed in pairs of neighboring atoms in the same sublattice A (different sublattices) of graphene monolayers, denoted as the M{sub 2}{sup AA} (M{sub 2}{sup AB}) configuration. The M{sub 2}{sup AA} configuration behaved as a ferromagnetic semiconductor. The band gaps for the majority and minority bands were 1.1 eV and 1.2 eV, respectively. The M{sub 2}{sup AB} configuration behaved as a nonmagnetic semiconductor with a band gap of 0.8 eV. Each aryl group could induce 1 Bohr magneton (?{sub B}) into the molecule-graphene system. Armchair graphene nanoribbons (GNRs) exhibited the same configuration-dependent magnetic properties as the graphene monolayers. The net spin of the functionalized zigzag GNRs was mainly localized on the edges demonstrating an adsorption site-dependent magnetism. For the zigzag GNRs, both the M{sub 2}{sup AA} and M{sub 2}{sup AB} configurations possibly had a magnetic moment. Each aryl group could induce 1.53.5 ?{sub B} into the molecule-graphene system. There was a metal-to-insulator transition after adsorption of the aryl groups for the zigzag GNRs.

  9. Generic configuration management system for documentation and on-line beam optics applications in the CERN PS complex

    E-Print Network [OSTI]

    Autin, Bruno; Jensen, O; Kazymov, A; Lindroos, M; Schinzel, Josi; Wildner, E

    1996-01-01T23:59:59.000Z

    Generic configuration management system for documentation and on-line beam optics applications in the CERN PS complex

  10. [Article 1 of 7: Motivates and Includes the Consumer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    surges; the extra cost of these premium features can be included in the electric service contract. The Smart Grid will mitigate PQ events that originate in the transmission and...

  11. Including costs of supply chain risk in strategic sourcing decisions

    E-Print Network [OSTI]

    Jain, Avani

    2009-01-01T23:59:59.000Z

    Cost evaluations do not always include the costs associated with risks when organizations make strategic sourcing decisions. This research was conducted to establish and quantify the impact of risks and risk-related costs ...

  12. Effects of the resistivity profile on the formation of a reversed configuration and single helicity states in compressible simulations of the reversed-field pinch

    SciTech Connect (OSTI)

    Onofri, M. [Tri Alpha Energy, P.O. Box 7010, Rancho Santa Margarita, California 92688 (United States)] [Tri Alpha Energy, P.O. Box 7010, Rancho Santa Margarita, California 92688 (United States); Malara, F. [Dipartimento di Fisica, Universit della Calabria, ponte P. Bucci, Cubo 31C, 87036 Rende (CS) (Italy)] [Dipartimento di Fisica, Universit della Calabria, ponte P. Bucci, Cubo 31C, 87036 Rende (CS) (Italy)

    2013-10-15T23:59:59.000Z

    Compressible magnetohydrodynamics simulations of the reversed-field pinch (RFP) are presented. Previous simulations of the RFP, including density and pressure evolution, showed that a stationary state with a reversed toroidal magnetic field could not be obtained, contrary to the results produced with numerical codes neglecting density and pressure dynamics. The simulations described in the present paper show that including density and pressure evolution, a stationary RFP configuration can be obtained if the resistivity has a radial profile steeply increasing close to the wall. Such resistivity profile is more realistic than a uniform resistivity, since the temperature at the wall is lower than in the plasma core.

  13. Limited Personal Use of Government Office Equipment including Information Technology

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-07T23:59:59.000Z

    The Order establishes requirements and assigns responsibilities for employees' limited personal use of Government resources (office equipment and other resources including information technology) within DOE, including NNSA. The Order is required to provide guidance on appropriate and inappropriate uses of Government resources. This Order was certified 04/23/2009 as accurate and continues to be relevant and appropriate for use by the Department. Certified 4-23-09. No cancellation.

  14. Alternative stripper configurations to minimize energy for CO2 capture Babatunde A. Oyenekan and Gary T. Rochelle*

    E-Print Network [OSTI]

    Rochelle, Gary T.

    GHGT-8 1 Alternative stripper configurations to minimize energy for CO2 capture Babatunde A. Alternative configurations Figure 1 shows three alternative stripper configurations that reduce the energy, provides 1 to 1.5 times faster rates than 7m MEA. This paper presents energy requirements calculated

  15. Scaled Second Order Perturbation Corrections to Configuration Interaction Singles: Efficient and Reliable Excitation Energy Methods

    SciTech Connect (OSTI)

    Rhee, Young Min; Head-Gordon, Martin

    2007-02-01T23:59:59.000Z

    Two modifications of the perturbative doubles correction to configuration interaction with single substitutions (CIS(D)) are suggested, which are excited state analogs of ground state scaled second order Moeller-Plesset (MP2) methods. The first approach employs two parameters to scale the two spin components of the direct term of CIS(D), starting from the two-parameter spin-component scaled (SCS) MP2 ground state, and is termed SCS-CIS(D). An efficient resolution-of-the-identity (RI) implementation of this approach is described. The second approach employs a single parameter to scale only the opposite-spin direct term of CIS(D), starting from the one-parameter scaled opposite spin (SOS) MP2 ground state, and is called SOS-CIS(D). By utilizing auxiliary basis expansions and a Laplace transform, a fourth order algorithm for SOS-CIS(D) is described and implemented. The parameters describing SCS-CIS(D) and SOS-CIS(D) are optimized based on a training set including valence excitations of various organic molecules and Rydberg transitions of water and ammonia, and they significantly improve upon CIS(D) itself. The accuracy of the two methods is found to be comparable. This arises from a strong correlation between the same-spin and opposite-spin portions of the excitation energy terms. The methods are successfully applied to the zincbacteriochlorin-bacteriochlorin charge transfer transition, for which time-dependent density functional theory, with presently available exchange-correlation functionals, is known to fail. The methods are also successfully applied to describe various electronic transitions outside of the training set. The efficiency of SOS-CIS(D) and the auxiliary basis implementation of CIS(D) and SCS-CIS(D) are confirmed with a series of timing tests.

  16. Analysis of fuel options for the breakeven core configuration of the Advanced Recycling Reactor

    SciTech Connect (OSTI)

    Stauff, N.E.; Klim, T.K.; Taiwo, T.A. [Argonne National Laboratory, Argonne, IL (United States); Fiorina, C. [Politecnico di Milano, Milan (Italy); Franceschini, F. [Westinghouse Electric Company LLC., Cranberry Township, Pennsylvania (United States)

    2013-07-01T23:59:59.000Z

    A trade-off study is performed to determine the impacts of various fuel forms on the core design and core physics characteristics of the sodium-cooled Toshiba- Westinghouse Advanced Recycling Reactor (ARR). The fuel forms include oxide, nitride, and metallic forms of U and Th. The ARR core configuration is redesigned with driver and blanket regions in order to achieve breakeven fissile breeding performance with the various fuel types. State-of-the-art core physics tools are used for the analyses. In addition, a quasi-static reactivity balance approach is used for a preliminary comparison of the inherent safety performances of the various fuel options. Thorium-fueled cores exhibit lower breeding ratios and require larger blankets compared to the U-fueled cores, which is detrimental to core compactness and increases reprocessing and manufacturing requirements. The Th cores also exhibit higher reactivity swings through each cycle, which penalizes reactivity control and increases the number of control rods required. On the other hand, using Th leads to drastic reductions in void and coolant expansion coefficients of reactivity, with the potential for enhancing inherent core safety. Among the U-fueled ARR cores, metallic and nitride fuels result in higher breeding ratios due to their higher heavy metal densities. On the other hand, oxide fuels provide a softer spectrum, which increases the Doppler effect and reduces the positive sodium void worth. A lower fuel temperature is obtained with the metallic and nitride fuels due to their higher thermal conductivities and compatibility with sodium bonds. This is especially beneficial from an inherent safety point of view since it facilitates the reactor cool-down during loss of power removal transients. The advantages in terms of inherent safety of nitride and metallic fuels are maintained when using Th fuel. However, there is a lower relative increase in heavy metal density and in breeding ratio going from oxide to metallic or nitride Th fuels relative to the U counterpart fuels. (authors)

  17. PJM Controller Testing with Prototypic PJM Nozzle Configuration

    SciTech Connect (OSTI)

    Bontha, Jagannadha R.; Nigl, Franz; Weier, Dennis R.; Leigh, Richard J.; Johnson, Eric D.; Wilcox, Wayne A.; Pfund, David M.; Baumann, Aaron W.; Wang, Yeefoo

    2009-08-21T23:59:59.000Z

    The U.S. Department of Energy (DOE) Office of River Protections Waste Treatment Plant (WTP) is being designed and built to pre-treat and then vitrify a large portion of the wastes in Hanfords 177 underground waste storage tanks. The WTP consists of three primary facilitiespretreatment, low-activity waste (LAW) vitrification, and high-level waste (HLW) vitrification. The pretreatment facility will receive waste piped from the Hanford tank farms and separate it into a high-volume, low-activity liquid stream stripped of most solids and radionuclides and a much smaller volume of HLW slurry containing most of the solids and most of the radioactivity. Many of the vessels in the pretreatment facility will contain pulse jet mixers (PJM) that will provide some or all of the mixing in the vessels. Pulse jet mixer technology was selected for use in black cell regions of the WTP, where maintenance cannot be performed once hot testing and operations commence. The PJMs have no moving mechanical parts that require maintenance. The vessels with the most concentrated slurries will also be mixed with air spargers and/or steady jets in addition to the mixing provided by the PJMs. Pulse jet mixers are susceptible to overblows that can generate large hydrodynamic forces, forces that can damage mixing vessels or their internal parts. The probability of an overblow increases if a PJM does not fill completely. The purpose of the testing performed for this report was to determine how reliable and repeatable the primary and safety (or backup) PJM control systems are at detecting drive overblows (DOB) and charge vessel full (CVF) conditions. Testing was performed on the ABB 800xA and Triconex control systems. The controllers operated an array of four PJMs installed in an approximately 13 ft diameter 15 ft tall tank located in the high bay of the Pacific Northwest National Laboratory (PNNL) 336 Building test facility. The PJMs were fitted with 4 inch diameter discharge nozzles representative of the nozzles to be used in the WTP. This work supplemented earlier controller tests done on PJMs with 2 inch nozzles (Bontha et al. 2007). Those earlier tests enabled the selection of appropriate pressure transmitters with associated piping and resulted in an alternate overblow detection algorithm that uses data from pressure transmitters mounted in a water flush line on the PJM airlines. Much of that earlier work was only qualitative, however, due to a data logger equipment failure that occurred during the 2007 testing. The objectives of the current work focused on providing quantitative determinations of the ability of the BNI controllers to detect DOB and CVF conditions. On both control systems, a DOB or CVF is indicated when the values of particular internal functions, called confidence values, cross predetermined thresholds. There are two types of confidence values; one based on a transformation of jet pump pair (JPP) drive and suction pressures, the other based on the pressure in the flush line. In the present testing, we collected confidence levels output from the ABB and Triconex controllers. These data were analyzed in terms of the true and noise confidence peaks generated during multiple cycles of DOB and CVF events. The distributions of peak and noise amplitudes were compared to see if thresholds could be set that would enable the detection of DOB and CVF events at high probabilities, while keeping false detections to low probabilities. Supporting data were also collected on PJM operation, including data on PJM pressures and levels, to provide direct experimental evidence of when PJMs were filling, full, driving, or overblowing.

  18. Solar Energy Education. Renewable energy: a background text. [Includes glossary

    SciTech Connect (OSTI)

    Not Available

    1985-01-01T23:59:59.000Z

    Some of the most common forms of renewable energy are presented in this textbook for students. The topics include solar energy, wind power hydroelectric power, biomass ocean thermal energy, and tidal and geothermal energy. The main emphasis of the text is on the sun and the solar energy that it yields. Discussions on the sun's composition and the relationship between the earth, sun and atmosphere are provided. Insolation, active and passive solar systems, and solar collectors are the subtopics included under solar energy. (BCS)

  19. Methods of producing adsorption media including a metal oxide

    DOE Patents [OSTI]

    Mann, Nicholas R; Tranter, Troy J

    2014-03-04T23:59:59.000Z

    Methods of producing a metal oxide are disclosed. The method comprises dissolving a metal salt in a reaction solvent to form a metal salt/reaction solvent solution. The metal salt is converted to a metal oxide and a caustic solution is added to the metal oxide/reaction solvent solution to adjust the pH of the metal oxide/reaction solvent solution to less than approximately 7.0. The metal oxide is precipitated and recovered. A method of producing adsorption media including the metal oxide is also disclosed, as is a precursor of an active component including particles of a metal oxide.

  20. Metal vapor laser including hot electrodes and integral wick

    DOE Patents [OSTI]

    Ault, Earl R. (Livermore, CA); Alger, Terry W. (Tracy, CA)

    1995-01-01T23:59:59.000Z

    A metal vapor laser, specifically one utilizing copper vapor, is disclosed herein. This laser utilizes a plasma tube assembly including a thermally insulated plasma tube containing a specific metal, e.g., copper, and a buffer gas therein. The laser also utilizes means including hot electrodes located at opposite ends of the plasma tube for electrically exciting the metal vapor and heating its interior to a sufficiently high temperature to cause the metal contained therein to vaporize and for subjecting the vapor to an electrical discharge excitation in order to lase. The laser also utilizes external wicking arrangements, that is, wicking arrangements located outside the plasma tube.

  1. Metal vapor laser including hot electrodes and integral wick

    DOE Patents [OSTI]

    Ault, E.R.; Alger, T.W.

    1995-03-07T23:59:59.000Z

    A metal vapor laser, specifically one utilizing copper vapor, is disclosed herein. This laser utilizes a plasma tube assembly including a thermally insulated plasma tube containing a specific metal, e.g., copper, and a buffer gas therein. The laser also utilizes means including hot electrodes located at opposite ends of the plasma tube for electrically exciting the metal vapor and heating its interior to a sufficiently high temperature to cause the metal contained therein to vaporize and for subjecting the vapor to an electrical discharge excitation in order to lase. The laser also utilizes external wicking arrangements, that is, wicking arrangements located outside the plasma tube. 5 figs.

  2. Watson Library enhancements to include new service desk

    E-Print Network [OSTI]

    2008-01-01T23:59:59.000Z

    12/5/13 KU Libraries News: Watson Library enhancements to include new service desk www.lib.ku.edu/news/newservicedesk.shtml 1/1 Contact Us The University of Kansas Libraries Lawrence, KS 66045 (785) 864-8983 Copyright 2013 by the University... of Kansas Watson Library enhancements to include new service desk The University of Kansas Libraries is adding a new service desk to Watson Library to enhance the user experience and draw attention to new and existing resources. The desk, which...

  3. Thin film solar cell including a spatially modulated intrinsic layer

    DOE Patents [OSTI]

    Guha, Subhendu (Troy, MI); Yang, Chi-Chung (Troy, MI); Ovshinsky, Stanford R. (Bloomfield Hills, MI)

    1989-03-28T23:59:59.000Z

    One or more thin film solar cells in which the intrinsic layer of substantially amorphous semiconductor alloy material thereof includes at least a first band gap portion and a narrower band gap portion. The band gap of the intrinsic layer is spatially graded through a portion of the bulk thickness, said graded portion including a region removed from the intrinsic layer-dopant layer interfaces. The band gap of the intrinsic layer is always less than the band gap of the doped layers. The gradation of the intrinsic layer is effected such that the open circuit voltage and/or the fill factor of the one or plural solar cell structure is enhanced.

  4. Final Report - Testing of Optimized Bubbler Configuration for HLW Melter VSL-13R2950-1, Rev. 0, dated 6/12/2013

    SciTech Connect (OSTI)

    Kruger, Albert A.; Pegg, I. L.; Callow, R. A.; Joseph, I.; Matlack, K. S.; Kot, W. K.

    2013-11-13T23:59:59.000Z

    The principal objective of this work was to determine the glass production rate increase and ancillary effects of adding more bubbler outlets to the current WTP HLW melter baseline. This was accomplished through testing on the HLW Pilot Melter (DM1200) at VSL. The DM1200 unit was selected for these tests since it was used previously with several HLW waste streams including the four tank wastes proposed for initial processing at Hanford. This melter system was also used for the development and optimization of the present baseline WTP HLW bubbler configuration for the WTP HLW melter, as well as for MACT testing for both HLW and LAW. Specific objectives of these tests were to: Conduct DM1200 melter testing with the baseline WTP bubbling configuration and as augmented with additional bubblers. Conduct DM1200 melter testing to differentiate the effects of total bubbler air flow and bubbler distribution on glass production rate and cold cap formation. Collect melter operating data including processing rate, temperatures at a variety of locations within the melter plenum space, melt pool temperature, glass melt density, and melter pressure with the baseline WTP bubbling configuration and as augmented with additional bubblers. Collect melter exhaust samples to compare particulate carryover for different bubbler configurations. Analyze all collected data to determine the effects of adding more bubblers to the WTP HLW melter to inform decisions regarding future lid re-designs. The work used a high aluminum HLW stream composition defined by ORP, for which an appropriate simulant and high waste loading glass formulation were developed and have been previously processed on the DM1200.

  5. Multi-reference approach to the calculation of photoelectron spectra including spin-orbit coupling

    E-Print Network [OSTI]

    Grell, Gilbert; Winter, Bernd; Seidel, Robert; Aziz, Emad F; Aziz, Saadullah G; Khn, Oliver

    2015-01-01T23:59:59.000Z

    X-ray photoelectron spectra provide a wealth of information on the electronic structure. The extraction of molecular details requires adequate theoretical methods, which in case of transition metal complexes has to account for effects due to the multi-configurational and spin-mixed nature of the many-electron wave function. Here, the Restricted Active Space Self-Consistent Field method including spin-orbit coupling is used to cope with this challenge and to calculate valence and core photoelectron spectra. The intensities are estimated within the frameworks of the Dyson orbital formalism and the sudden approximation. Thereby, we utilize an efficient computational algorithm that is based on a biorthonormal basis transformation. The approach is applied to the valence photoionization of the gas phase water molecule and to the core ionization spectrum of the $\\text{[Fe(H}_2\\text{O)}_6\\text{]}^{2+}$ complex. The results show good agreement with the experimental data obtained in this work, whereas the sudden approx...

  6. Multi-reference approach to the calculation of photoelectron spectra including spin-orbit coupling

    E-Print Network [OSTI]

    Gilbert Grell; Sergey I. Bokarev; Bernd Winter; Robert Seidel; Emad F. Aziz; Saadullah G. Aziz; Oliver Khn

    2015-06-05T23:59:59.000Z

    X-ray photoelectron spectra provide a wealth of information on the electronic structure. The extraction of molecular details requires adequate theoretical methods, which in case of transition metal complexes has to account for effects due to the multi-configurational and spin-mixed nature of the many-electron wave function. Here, the Restricted Active Space Self-Consistent Field method including spin-orbit coupling is used to cope with this challenge and to calculate valence and core photoelectron spectra. The intensities are estimated within the frameworks of the Dyson orbital formalism and the sudden approximation. Thereby, we utilize an efficient computational algorithm that is based on a biorthonormal basis transformation. The approach is applied to the valence photoionization of the gas phase water molecule and to the core ionization spectrum of the $\\text{[Fe(H}_2\\text{O)}_6\\text{]}^{2+}$ complex. The results show good agreement with the experimental data obtained in this work, whereas the sudden approximation demonstrates distinct deviations from experiments.

  7. Casting Apparatus Including A Gas Driven Molten Metal Injector And Method

    DOE Patents [OSTI]

    Meyer, Thomas N. (Murrysville, PA)

    2004-06-01T23:59:59.000Z

    The casting apparatus (50) includes a holding vessel (10) for containing a supply of molten metal (12) and a casting mold (52) located above the holding vessel (10) and having a casting cavity (54). A molten metal injector (14) extends into the holding vessel (10) and is at least partially immersed in the molten metal (12) in the holding vessel (10). The molten metal injector (14) is in fluid communication with the casting cavity (54). The molten metal injector (14) has an injector body (16) defining an inlet opening (24) for receiving molten metal into the injector body (16). A gas pressurization source (38) is in fluid communication with the injector body (16) for cyclically pressurizing the injector body (16) and inducing molten metal to flow from the injector body (16) to the casting cavity (54). An inlet valve (42) is located in the inlet opening (24) in the injector body (16) for filling molten metal into the injector body (16). The inlet valve (42) is configured to prevent outflow of molten metal from the injector body (16) during pressurization and permit inflow of molten metal into the injector body (16) after pressurization. The inlet valve (42) has an inlet valve actuator (44) located above the surface of the supply of molten metal (12) and is operatively connected to the inlet valve (42) for operating the inlet valve (42) between open and closed positions.

  8. Including Blind Students in Computer Science Through Access to Graphs

    E-Print Network [OSTI]

    Young, R. Michael

    Including Blind Students in Computer Science Through Access to Graphs Suzanne Balik, Sean Mealin SKetching tool, GSK, to provide blind and sighted people with a means to create, examine, and share graphs (node-link diagrams) in real-time. GSK proved very effective for one blind computer science student

  9. Bayesian hierarchical reconstruction of protein profiles including a digestion model

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Bayesian hierarchical reconstruction of protein profiles including a digestion model Pierre to recover the protein biomarkers content in a robust way. We will focus on the digestion step since and each branch to a molecular processing such as digestion, ionisation and LC-MS separation

  10. Biomass Potentials from California Forest and Shrublands Including Fuel

    E-Print Network [OSTI]

    Biomass Potentials from California Forest and Shrublands Including Fuel Reduction Potentials-04-004 February 2005 Revised: October 2005 Arnold Schwarzenegger, Governor, State of California #12;Biomass Tiangco, CEC Bryan M. Jenkins, University of California #12;Biomass Potentials from California Forest

  11. Optimal Energy Management Strategy including Battery Health through Thermal

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Optimal Energy Management Strategy including Battery Health through Thermal Management for Hybrid: Energy management strategy, Plug-in hybrid electric vehicles, Li-ion battery aging, thermal management, Pontryagin's Minimum Principle. 1. INTRODUCTION The interest for energy management strategy (EMS) of Hybrid

  12. Area of cooperation includes: Joint research and development on

    E-Print Network [OSTI]

    Buyya, Rajkumar

    Technologies August 2, 2006: HCL Technologies Ltd (HCL), India's leading global IT services company, has signed projects that are using this technology currently such as BioGrid in Japan, National Grid Service in UKArea of cooperation includes: · Joint research and development on Grid computing technologies

  13. Energy Transitions: A Systems Approach Including Marcellus Shale Gas Development

    E-Print Network [OSTI]

    Walter, M.Todd

    Energy Transitions: A Systems Approach Including Marcellus Shale Gas Development A Report Engineering) W. VA #12;Energy Transitions: A Systems Approach August 2011 version Page 2 Energy Transitions sources globally, some very strong short-term drivers of energy transitions reflect rising concerns over

  14. 1 INTRODUCTION A typical flexible pavement system includes four

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    1 INTRODUCTION A typical flexible pavement system includes four distinct layers: asphalt concrete course in order to reduce costs or to minimize capil- lary action under the pavement. Figure 1: Cross-section of flexible pavement system (Muench 2006) Pavement distress may occur due to either traffic or environmental

  15. SAFETY AND HEALTH PROGRAM Including the Chemical Hygiene Plan

    E-Print Network [OSTI]

    Evans, Paul G.

    SAFETY AND HEALTH PROGRAM Including the Chemical Hygiene Plan Wisconsin Center for Applied, Technical Staff & Chemical Hygiene Officer kakupcho@wisc.edu 262-2982 Lab Facility Website http..........................................................................................................3 CHEMICAL HYGIENE PLAN III. Work-site Analysis and Hazard Identification 3.1 Hazardous Chemical

  16. HTS Conductor Design Issues Including Quench and Stability,

    E-Print Network [OSTI]

    HTS Conductor Design Issues Including Quench and Stability, AC Losses, and Fault Currents M. J objective and technical approach The purpose of this collaborative R&D project is an investigation of HTS conductor design optimization with emphasis on stability and protection issues for YBCO wires and coils

  17. Free Energy Efficiency Kit includes CFL light bulbs,

    E-Print Network [OSTI]

    Rose, Annkatrin

    Free Energy Efficiency Kit Kit includes CFL light bulbs, spray foam, low-flow shower head, and more for discounted energy assessments. FREE HOME ENERGY EFFICIENCY SEMINAR N e w R i ver L i g ht & Pow e r a n d W! Building Science 101 Presentation BPI Certified Building Professionals will present home energy efficiency

  18. DO NOT INCLUDE: flatten cardboard staples, tape & envelope windows ok

    E-Print Network [OSTI]

    Wolfe, Patrick J.

    / bottles Metal items other than cans/foil Napkins Paper towels Plastic bags Plastic films Plastic utensilsDO NOT INCLUDE: flatten cardboard staples, tape & envelope windows ok Aerosol cans Books Bottle, PDAs, inkjet cartridges, CFL bulbs (cushioned, sealed in plastic) computers, printers, printer

  19. cDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, N.V.; Broekaert, W.F.; Namhai Chua; Kush, A.

    1993-02-16T23:59:59.000Z

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids.

  20. Perhaps federal research grants can include infrastructure costs.

    E-Print Network [OSTI]

    Sur, Mriganka

    Perhaps federal research grants can include infrastructure costs. There are signs to find favour in China, a country beset by similar problems. The particular structure of Indian science and healthystart-uppackages. The government could contribute to these costs. 487 NATURE|Vol 436|28 July 2005

  1. Energy level properties of 4p$^6$4d$^3$, 4p$^6$4d$^2$4f and 4p$^5$4d$^4$ configurations of W$^{35+}$ ion

    E-Print Network [OSTI]

    Bogdanovich, P

    2015-01-01T23:59:59.000Z

    The ab initio quasirelativistic Hartree-Fock method developed specifically for the calculation of spectroscopic parameters of heavy atoms and highly charged ions was used to derive spectral data for the multicharged tungsten ion W$^{35+}$. The configuration interaction method was applied to include the electron-correlation effects. The relativistic effects were taken into account in the Breit-Pauli approximation for quasirelativistic Hartree-Fock radial orbitals. The energy level spectra, radiative lifetimes $\\tau$, Lande $g$-factors are calculated for the $\\mathrm{4p^64d^3}$, $\\mathrm{4p^64d^24f}$ and $\\mathrm{4p^54d^4}$ configurations of the W$^{35+}$ ion.

  2. Determining the mechanisms of catonic contamination of PEMFCs using a strip cell configuration

    SciTech Connect (OSTI)

    Kienitz, Brian L [Los Alamos National Laboratory; Pivovar, Bryan S [Los Alamos National Laboratory; Fernando, Garzon [Los Alamos National Laboratory; Zawodzinski, Thomas A [CWRU

    2008-01-01T23:59:59.000Z

    Cationic contamination of polymer electrolyte fuel cells has been shown to cause serious performance degradation but the exact mechanisms of this degradation are not fully understood. A strip cell configuration was devised to study the mechanisms of performance degradation due to cationic contamination by changing the time and length scales of traditional fuel cells while providing a suitable reference electrode. This 'strip cell' configuration utilizes traditional Nafion{reg_sign} membranes in an inplane configuration with electrodes painted on each end. Using this cell it was determined that cationic contaminants collect near the cathode of the fuel cell under load and that this profile leads to increased losses primarily in the cathode region. These results can be directly related to performance losses in a typical PEMFC contaminated by foreign cations.

  3. E?H mode transition density and power in two types of inductively coupled plasma configuration

    SciTech Connect (OSTI)

    Wang, Jian; Du, Yin-chang; Zhang, Xiao; Zheng, Zhe; Liu, Yu; Xu, Liang; Wang, Pi; Cao, Jin-xiang, E-mail: jxcao@ustc.edu.cn [Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China)

    2014-07-15T23:59:59.000Z

    E???H transition power and density were investigated at various argon pressures in inductively coupled plasma (ICP) in a cylindrical interlaid chamber. The transition power versus the pressure shows a minimum transition power at 4?Pa (?/?=1) for argon. Then the transition density hardly changes at low pressures (?/??1), but it increases clearly when argon pressure exceeds an appropriate value. In addition, both the transition power and transition density are lower in the re-entrant configuration of ICP compared with that in the cylindrical configuration of ICP. The result may be caused from the decrease of stochastic heating in the re-entrant configuration of ICP. This work is useful to understand E???H mode transition and control the transition points in real plasma processes.

  4. Operational concepts for the Environmental Restoration and Waste Management Configuration Study

    SciTech Connect (OSTI)

    NONE

    1990-12-01T23:59:59.000Z

    DOE has initiated a planning process in anticipation of upgrading all DOE waste management operations and facilities. The EM Configuration Study examines four areas: (1) planning considerations, (2) system configuration, (3) operational concepts, and (4) resource assessments. Each area is addressed by a different team. Objective of the Operational Concepts Team 3 study is to investigate, identify, define, and evaluate alternative ways to manage DOE waste management facilities, while taking into consideration the information gathered by the other EM Configuration teams. This report provides information and criteria for evaluating the relative effectiveness and efficiency of various organizational alternatives that can be used to operate and manage DOE waste facilities. Intent of this report is not to select one best management alternative but rather to provide recommendations, conclusions, and background information from which decisions will be made at a future date.

  5. Multi-processor including data flow accelerator module

    DOE Patents [OSTI]

    Davidson, George S. (Albuquerque, NM); Pierce, Paul E. (Albuquerque, NM)

    1990-01-01T23:59:59.000Z

    An accelerator module for a data flow computer includes an intelligent memory. The module is added to a multiprocessor arrangement and uses a shared tagged memory architecture in the data flow computer. The intelligent memory module assigns locations for holding data values in correspondence with arcs leading to a node in a data dependency graph. Each primitive computation is associated with a corresponding memory cell, including a number of slots for operands needed to execute a primitive computation, a primitive identifying pointer, and linking slots for distributing the result of the cell computation to other cells requiring that result as an operand. Circuitry is provided for utilizing tag bits to determine automatically when all operands required by a processor are available and for scheduling the primitive for execution in a queue. Each memory cell of the module may be associated with any of the primitives, and the particular primitive to be executed by the processor associated with the cell is identified by providing an index, such as the cell number for the primitive, to the primitive lookup table of starting addresses. The module thus serves to perform functions previously performed by a number of sections of data flow architectures and coexists with conventional shared memory therein. A multiprocessing system including the module operates in a hybrid mode, wherein the same processing modules are used to perform some processing in a sequential mode, under immediate control of an operating system, while performing other processing in a data flow mode.

  6. Conversion of geothermal waste to commercial products including silica

    DOE Patents [OSTI]

    Premuzic, Eugene T. (East Moriches, NY); Lin, Mow S. (Rocky Point, NY)

    2003-01-01T23:59:59.000Z

    A process for the treatment of geothermal residue includes contacting the pigmented amorphous silica-containing component with a depigmenting reagent one or more times to depigment the silica and produce a mixture containing depigmented amorphous silica and depigmenting reagent containing pigment material; separating the depigmented amorphous silica and from the depigmenting reagent to yield depigmented amorphous silica. Before or after the depigmenting contacting, the geothermal residue or depigmented silica can be treated with a metal solubilizing agent to produce another mixture containing pigmented or unpigmented amorphous silica-containing component and a solubilized metal-containing component; separating these components from each other to produce an amorphous silica product substantially devoid of metals and at least partially devoid of pigment. The amorphous silica product can be neutralized and thereafter dried at a temperature from about 25.degree. C. to 300.degree. C. The morphology of the silica product can be varied through the process conditions including sequence contacting steps, pH of depigmenting reagent, neutralization and drying conditions to tailor the amorphous silica for commercial use in products including filler for paint, paper, rubber and polymers, and chromatographic material.

  7. Operational concepts and implementation strategies for the design configuration management process.

    SciTech Connect (OSTI)

    Trauth, Sharon Lee

    2007-05-01T23:59:59.000Z

    This report describes operational concepts and implementation strategies for the Design Configuration Management Process (DCMP). It presents a process-based systems engineering model for the successful configuration management of the products generated during the operation of the design organization as a business entity. The DCMP model focuses on Pro/E and associated activities and information. It can serve as the framework for interconnecting all essential aspects of the product design business. A design operation scenario offers a sense of how to do business at a time when DCMP is second nature within the design organization.

  8. Foil cycling technique for the VESUVIO spectrometer operating in the resonance detector configuration

    SciTech Connect (OSTI)

    Schooneveld, E. M.; Mayers, J.; Rhodes, N. J.; Pietropaolo, A.; Andreani, C.; Senesi, R.; Gorini, G.; Perelli-Cippo, E.; Tardocchi, M. [ISIS Facility, Rutherford Appleton Laboratory, Chilton, Didcot, Oxfordshire OX11 0QX (United Kingdom); Consiglio Nazionale delle Ricerche-Istituto Nazionale per la Fisica della Materia, Universita degli Studi di Roma Tor Vergata, Via della Ricerca Scientifica 1, 00133 Rome (Italy); Dipartimento di Fisica, Universita degli Studi di Roma 'Tor Vergata', Via della Ricerca Scientifica 1, 00133 Rome (Italy); Dipartimento di Fisica 'G. Occhialini', Universita degli Studi di Milano Bicocca, Piazza della Scienza 2, I-20126 Milan (Italy) and CNR-INFM, Universita degli Studi di Milano Bicocca, Piazza della Scienza 2, I-20126 Milan (Italy)

    2006-09-15T23:59:59.000Z

    This article reports a novel experimental technique, namely, the foil cycling technique, developed on the VESUVIO spectrometer (ISIS spallation source) operating in the resonance detector configuration. It is shown that with a proper use of two foils of the same neutron absorbing material it is possible, in a double energy analysis process, to narrow the width of the instrumental resolution of a spectrometer operating in the resonance detector configuration and to achieve an effective subtraction of the neutron and gamma backgrounds. Preliminary experimental results, obtained from deep inelastic neutron scattering measurements on lead, zirconium hydride, and deuterium chloride samples, are presented.

  9. Inductrack configuration

    DOE Patents [OSTI]

    Post, Richard Freeman (Walnut Creek, CA)

    2006-08-29T23:59:59.000Z

    A simple permanent-magnet-excited maglev geometry provides levitation forces and is stable against vertical displacements from equilibrium but is unstable against horizontal displacements. An Inductrack system is then used in conjunction with this system to effect stabilization against horizontal displacements and to provide centering forces to overcome centrifugal forces when the vehicle is traversing curved sections of a track or when any other transient horizontal force is present. In some proposed embodiments, the Inductrack track elements are also employed as the stator of a linear induction-motor drive and braking system.

  10. Carver Configuration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess StoriesFebruary 26,ComputersTrinitythe nation'sCarousolar

  11. Configurations The

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting theCommercialization andComputer

  12. System Configuration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructureProposed Action(Insert DirectiveSynthetic fuelMIT News

  13. Franklin Configuration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget(DANCE) TargetForms &Francis

  14. Edison Configuration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract ManagementDiscoveringESnet UpdateEarth WeekAlamos

  15. Analysis of the Effects of Compositional and Configurational Assumptions on Product Costs for the Thermochemical Conversion of Lignocellulosic Biomass to Mixed Alcohols FY 2007 Progress Report

    SciTech Connect (OSTI)

    Zhu, Yunhua; Gerber, Mark A.; Jones, Susanne B.; Stevens, Don J.

    2009-02-01T23:59:59.000Z

    The purpose of this study was to examine alternative biomass-to-ethanol conversion process assumptions and configuration options to determine their relative effects on overall process economics. A process-flow-sheet computer model was used to determine the heat and material balance for each configuration that was studied. The heat and material balance was then fed to a costing spreadsheet to determine the impact on the ethanol selling price. By examining a number of operational and configuration alternatives and comparing the results to the base flow sheet, alternatives having the greatest impact the performance and cost of the overall system were identified and used to make decisions on research priorities. This report, which was originally published in December 2008, has been revised primarily to correct information presented in Appendix B -- Base Case Flow Sheets and Model Results. The corrections to Appendix B include replacement of several pages in Table B.1 that duplicated previous pages of the table. Other changes were made in Appendix B to correct inconsistencies between stream labels presented in the tables and the stream labels in the figures.

  16. Theoretical energy level spectra and transition data for 4p$^6$4d$^2$, 4p$^6$4d4f and 4p$^5$4d$^3$ configurations of W$^{36+}$ ion

    E-Print Network [OSTI]

    Bogdanovich, P

    2015-01-01T23:59:59.000Z

    The ab initio quasirelativistic Hartree-Fock method developed specifically for the calculation of spectral parameters of heavy atoms and highly charged ions is used to derive transition data for multicharged tungsten ion. The configuration interaction method is applied to include electron correlation effects. The relativistic effects are taken into account in the Breit-Pauli approximation for quasirelativistic Hartree-Fock radial orbitals. The energy level spectra, radiative lifetimes $\\tau$, Lande $g$-factors are calculated for the $\\mathrm{4p^64d^2}$, $\\mathrm{4p^64d4f}$ and $\\mathrm{4p^54d^3}$ configurations of W$^{36+}$ ion. The transition wavelengths $\\lambda$, spontaneous transition probabilities $A$, oscillator strengths $gf$ and line strengths $S$ for the electric dipole, electric quadrupole, electric octupole and magnetic dipole transitions among the levels of these configurations are tabulated.

  17. Theoretical energy level spectra and transition data for 4p$^6$4d, 4p$^6$4f and 4p$^5$4d$^2$ configurations of W$^{37+}$ ion

    E-Print Network [OSTI]

    Bogdanovich, P

    2015-01-01T23:59:59.000Z

    The ab initio quasirelativistic Hartree-Fock method developed specifically for the calculation of spectral parameters of heavy atoms and highly charged ions was applied to determine atomic data for tungsten ions. The correlation effects were included by adopting configuration interaction method. The Breit-Pauli approximation for quasirelativistic Hartree-Fock radial orbitals was employed to take into account relativistic effects. The energy level spectra, radiative lifetimes, Lande factors $g$ were calculated for the $\\mathrm{4p^64d}$, $\\mathrm{4p^64f}$ and $\\mathrm{4p^54d^2}$ configurations of W$^{37+}$ ion. The atomic data, namely, the transition wavelengths, spontaneous emission rates and oscillator strengths for the electric dipole, electric quadrupole and magnetic dipole transitions among and within the levels of these configurations are tabulated.

  18. cDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

    1993-02-16T23:59:59.000Z

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a pu GOVERNMENT RIGHTS This application was funded under Department of Energy Contract DE-AC02-76ER01338. The U.S. Government has certain rights under this application and any patent issuing thereon.

  19. Composite material including nanocrystals and methods of making

    DOE Patents [OSTI]

    Bawendi, Moungi G.; Sundar, Vikram C.

    2010-04-06T23:59:59.000Z

    Temperature-sensing compositions can include an inorganic material, such as a semiconductor nanocrystal. The nanocrystal can be a dependable and accurate indicator of temperature. The intensity of emission of the nanocrystal varies with temperature and can be highly sensitive to surface temperature. The nanocrystals can be processed with a binder to form a matrix, which can be varied by altering the chemical nature of the surface of the nanocrystal. A nanocrystal with a compatibilizing outer layer can be incorporated into a coating formulation and retain its temperature sensitive emissive properties.

  20. A coke oven model including thermal decomposition kinetics of tar

    SciTech Connect (OSTI)

    Munekane, Fuminori; Yamaguchi, Yukio [Mitsubishi Chemical Corp., Yokohama (Japan); Tanioka, Seiichi [Mitsubishi Chemical Corp., Sakaide (Japan)

    1997-12-31T23:59:59.000Z

    A new one-dimensional coke oven model has been developed for simulating the amount and the characteristics of by-products such as tar and gas as well as coke. This model consists of both heat transfer and chemical kinetics including thermal decomposition of coal and tar. The chemical kinetics constants are obtained by estimation based on the results of experiments conducted to investigate the thermal decomposition of both coal and tar. The calculation results using the new model are in good agreement with experimental ones.

  1. Numerical evaluation of propeller noise, including non-linear effects

    E-Print Network [OSTI]

    White, Terence Alan

    1985-01-01T23:59:59.000Z

    University Chairman of Advisor y Commitee: Dr. Kenneth Korkan Using the transonic flow field(s) generated by the NASPROP-E computer code for an eight blade SR3-series propeller, a method is investigated to calculate the total noise values and frequency... in three dimensions, and the influence of the damping on the calculated noise values is investigated. Since the flow field includes the wave systems near the blade surface, the quadr upole noise sour ce term is accounted for as are the monopole...

  2. What To Include In The Whistleblower Complaint? | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved: 5-13-14Russian Nuclear Warheads ArrivesAdministration To Include In

  3. Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza

    SciTech Connect (OSTI)

    ORAU's Oak Ridge Institute for Science Education (HCTT-CHE)

    2011-04-14T23:59:59.000Z

    The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster - readiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that - help strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. This tool has been reviewed by a variety of key subject matter experts from federal, state, and local agencies and organizations. It also has been piloted with various communities that consist of different population sizes, to include large urban to small rural communities.

  4. Solving The High Energy Evolution Equation Including Running Coupling Corrections

    E-Print Network [OSTI]

    Javier L. Albacete; Yuri V. Kovchegov

    2007-06-22T23:59:59.000Z

    We study the solution of the nonlinear BK evolution equation with the recently calculated running coupling corrections [hep-ph/0609105, hep-ph/0609090]. Performing a numerical solution we confirm the earlier result of [hep-ph/0408216] that the high energy evolution with the running coupling leads to a universal scaling behavior for the dipole scattering amplitude. The running coupling corrections calculated recently significantly change the shape of the scaling function as compared to the fixed coupling case leading to a considerable increase in the anomalous dimension and to a slow-down of the evolution with rapidity. The difference between the two recent calculations is due to an extra contribution to the evolution kernel, referred to as the subtraction term, which arises when running coupling corrections are included. These subtraction terms were neglected in both recent calculations. We evaluate numerically the subtraction terms for both calculations, and demonstrate that when the subtraction terms are added back to the evolution kernels obtained in the two works the resulting dipole amplitudes agree with each other! We then use the complete running coupling kernel including the subtraction term to find the numerical solution of the resulting full non-linear evolution equation with the running coupling corrections. Again the scaling regime is recovered at very large rapidity.

  5. Cogeneration handbook for the petroleum refining industry. [Glossary included

    SciTech Connect (OSTI)

    Not Available

    1984-02-01T23:59:59.000Z

    This Handbook deals only with industrial cogeneration, that is, simultaneous production of both heat and electricity at the industrial plant site. The cogenerator has the option of either selling all cogenerated power to the utility while simultaneously purchasing power to satisfy his plant demand, or directly supplying the plant demand with cogenerated power, thus displacing utility-supplied power. This Handbook provides the refinery plant manager or company energy coordinator with a framework for making a preliminary assessment of the feasibility and viability of cogeneration at a particular plant. The handbook is intended to provide an understanding of the potential of several standardized cogeneration systems, as well as their limitations. However, because the decision to cogenerate is very site specific, the handbook cannot provide all of the answers. It does attempt, however, to bring to light the major issues that should be addressed in the decision-making process. The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. 39 figures, 37 tables.

  6. Detonation wave detection probe including parallel electrodes on a flexible backing strip

    DOE Patents [OSTI]

    Uher, K.J.

    1995-12-19T23:59:59.000Z

    A device is disclosed for sensing the occurrence of destructive events and events involving mechanical shock in a non-intrusive manner. A pair of electrodes is disposed in a parallel configuration on a backing strip of flexible film. Electrical circuitry is used to sense the time at which an event causes electrical continuity between the electrodes or, with a sensor configuration where the electrodes are shorted together, to sense the time at which electrical continuity is lost. 4 figs.

  7. Detonation wave detection probe including parallel electrodes on a flexible backing strip

    SciTech Connect (OSTI)

    Uher, Kenneth J. (Los Alamos, NM)

    1995-01-01T23:59:59.000Z

    A device for sensing the occurrence of destructive events and events involving mechanical shock in a non-intrusive manner. A pair of electrodes is disposed in a parallel configuration on a backing strip of flexible film. Electrical circuitry is used to sense the time at which an event causes electrical continuity between the electrodes or, with a sensor configuration where the electrodes are shorted together, to sense the time at which electrical continuity is lost.

  8. String Tests of 3S1P Configurations for Electric Energy Storage Applications

    E-Print Network [OSTI]

    String Tests of 3S1P Configurations for Electric Energy Storage Applications Prepared for the U.2 Deliverable 2 Report on Results of Storage Tests Prepared by Hawai`i Natural Energy Institute School of OceanPConfigurationsfor ElectricEnergyStorageApplications Matthieu Dubarry and Bor Yann Liaw Hawaii Natural Energy

  9. Automated Derivation of Configurations for the Integration of Software(+) Engineering Environments

    E-Print Network [OSTI]

    Integration for Flexible Automation Systems" Vienna University of Technology Vienna, Austria {stefan.biffl, richard.mordinyi, thomas.moser}@tuwien.ac.at Abstract--Today's systems integration technologies enable model-driven approach for the automated derivation of integration technology configurations

  10. Internal Friction Controls the Speed of Protein Folding from a Compact Configuration

    E-Print Network [OSTI]

    Roder, Heinrich

    Internal Friction Controls the Speed of Protein Folding from a Compact Configuration Suzette A is independent of the cosolutes used to adjust solvent friction. Therefore, interactions within the interior. Interestingly, we find a very strong temperature dependence in these "internal friction"-controlled dynamics

  11. Spatio-Temporal Partitioning of Computational Structures onto Configurable Computing Machines

    E-Print Network [OSTI]

    configurations, hardware controllers and host-based control code. Keywords: Run-time reconfiguration, FPGA, CCM in the available FPGA logic. The RTR CCM calculates a portion of the problem and then stores the intermediate results. Then the CCM reconfigures the FPGAs for another part of the computation and continues where

  12. Escape configuration lattice near the nematic-isotropic transition: Tilt analogue of blue phases

    E-Print Network [OSTI]

    Buddhapriya Chakrabarti; Yashodhan Hatwalne; N. V. Madhusudana

    2006-04-28T23:59:59.000Z

    We predict the possible existence of a new phase of liquid crystals near the nematic-isotropic ($ NI $) transition. This phase is an achiral, tilt-analogue of the blue phase and is composed of a lattice of {\\em double-tilt}, escape-configuration cylinders. We discuss the structure and the stability of this phase and provide an estimate of the lattice parameter.

  13. Hylleraas-configuration-interaction study of the {sup 1}S ground state of neutral beryllium

    SciTech Connect (OSTI)

    Sims, James S.; Hagstrom, Stanley A. [National Institute of Standards and Technology, Gaithersburg, Maryland 20878-9957 (United States); Departments of Chemistry and Computer Science, Indiana University, Bloomington, Indiana 47405 (United States)

    2011-03-15T23:59:59.000Z

    Hylleraas-configuration-interaction (Hy-CI) method variational calculations are reported for the {sup 1}S ground state of neutral beryllium. The best nonrelativistic energy obtained was -14.667 356 4 hartree, which is estimated to be accurate to a tenth of a microhartree.

  14. SUMTIME-MOUSAM: Configurable Marine Weather Forecast Generator Somayajulu G. Sripada and Ehud Reiter

    E-Print Network [OSTI]

    Sripada, Yaji

    turbines and neonatal intensive care unit (NICU). In the domain of gas turbines we are working on summarizing sensor data from an op- erational gas turbine (Yu et. al., 2003) for the maintenance engineersSUMTIME-MOUSAM: Configurable Marine Weather Forecast Generator Somayajulu G. Sripada and Ehud

  15. SUMTIME-MOUSAM: Configurable Marine Weather Forecast Generator Somayajulu G. Sripada and Ehud Reiter

    E-Print Network [OSTI]

    Reiter, Ehud

    turbines and neonatal intensive care unit (NICU). In the domain of gas turbines we are working on summarizing sensor data from an opera- tional gas turbine (Yu et. al., 2003) for the maintenance engineersSUMTIME-MOUSAM: Configurable Marine Weather Forecast Generator Somayajulu G. Sripada and Ehud

  16. CONFIGURATION AND MAINTENANCE OF THE ARIES-ST POWER PLANT X.R. Wang,a

    E-Print Network [OSTI]

    CONFIGURATION AND MAINTENANCE OF THE ARIES-ST POWER PLANT X.R. Wang,a M.S. Tillack,a F ARIES-ST is a 1000 MWe fusion power plant based on a low aspect ratio "spherical torus" (ST) plasma availability of the power plant. Mechanical joints are poss- ible in the normal conducting single-turn toroidal

  17. CONFIGURATION AND MAINTENANCE OF THE ARIES-ST POWER PLANT X.R. Wang,a

    E-Print Network [OSTI]

    Najmabadi, Farrokh

    CONFIGURATION AND MAINTENANCE OF THE ARIES-ST POWER PLANT X.R. Wang,a M.S. Tillack,a F Abstract- ARIES-ST is a 1000 MWe fusion power plant based on a low aspect ratio "spherical torus" (ST availability of the power plant. Mechanical joints are possible in the normal conducting single-turn toroidal

  18. Green Move: a platform for highly configurable, heterogeneous electric vehicle sharing

    E-Print Network [OSTI]

    Cugola, Gianpaolo

    Green Move: a platform for highly configurable, heterogeneous electric vehicle sharing Andrea G the spreading of electric vehicles, in particular for what concerns the high upfront costs of the vehicles benefits. I. INTRODUCTION Electric vehicle sharing has the potential to provide a solution to many

  19. CRAD, Configuration Management- Oak Ridge National Laboratory High Flux Isotope Reactor Contractor ORR

    Broader source: Energy.gov [DOE]

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a February 2007 assessment of the Configuration Management Program portion of an Operational Readiness Review of the Oak Ridge National Laboratory, High Flux Isotope Reactor.

  20. Automated Diagnosis of Product-line Configuration Errors on Feature Models

    E-Print Network [OSTI]

    Schmidt, Douglas C.

    Automated Diagnosis of Product-line Configuration Errors on Feature Models Jules White and Doulas Feature models are widely used to model software product-line (SPL) variability. SPL variants are config Introduction Current trends and challenges. Software Product- Lines (SPLs) are a technique for creating

  1. The Effect of Thermal Load Configurations on Passive Chilled Beam Performance

    E-Print Network [OSTI]

    Nelson, Ian 1982-

    2012-11-15T23:59:59.000Z

    dynamics (CFD) model was developed in Star CCM+ v6.06 and used for further analysis of the flow field and to predict additional spatial arrangements of the beam, interior dimensions, and heat source configurations. The CFD model implemented a calculation...

  2. Workload-Based Configuration of MEMS-Based Storage Devices for Mobile Systems

    E-Print Network [OSTI]

    Miller, Ethan L.

    Data layout, MEMS, Probe-Based Storage 1. INTRODUCTION Users of battery-powered mobile systems requireWorkload-Based Configuration of MEMS-Based Storage Devices for Mobile Systems Mohammed G. Khatib.h.hartel@utwente.nl ABSTRACT Because of its small form factor, high capacity, and expected low cost, MEMS-based storage

  3. Management of Security Policy Configuration using a Semantic Threat Graph Approach

    E-Print Network [OSTI]

    Foley, Simon

    Management of Security Policy Configuration using a Semantic Threat Graph Approach Simon N. Foley, in turn, unnec- essarily expose the enterprise to known threats. This paper proposes a threat management Threat Graphs, a variation of the tradi- tional Threat/Attack Tree, extended in order to relate semantic

  4. IV. STATION CONFIGURATION AND SENSOR COMPARISONS Comparison of solar radiation data gathered at

    E-Print Network [OSTI]

    Oregon, University of

    8 IV. STATION CONFIGURATION AND SENSOR COMPARISONS Comparison of solar radiation data gathered of the instruments used to monitor the incident solar radiation. Five types of so- lar sensors and several different data loggers have been used to gather the solar radiation data presented in this data book

  5. Solar Energy Materials & Solar Cells 91 (2007) 13881391 Bifacial configurations for CdTe solar cells

    E-Print Network [OSTI]

    Romeo, Alessandro

    2007-01-01T23:59:59.000Z

    Solar Energy Materials & Solar Cells 91 (2007) 13881391 Bifacial configurations for CdTe solar We present a different back contact for CdTe solar cell by the application of only a transparent that acts as a free-Cu stable back contact and at the same time allows to realize bifacial CdTe solar cells

  6. MANAGING THE CONFIGURATION OF INFORMATION SYSTEMS WITH A FOCUS ON SECURITY

    E-Print Network [OSTI]

    MANAGING THE CONFIGURATION OF INFORMATION SYSTEMS WITH A FOCUS ON SECURITY Shirley Radack, Editor Computer Security Division Information Technology Laboratory National Institute of Standards and Technology an impact on the security of the systems and operations. In developing information systems, organizations

  7. Optimal Battery Configuration in a Residential Home with Time-of-Use Pricing

    E-Print Network [OSTI]

    Simunic, Tajana

    is higher. Energy arbitrage leverages these different energy prices by buying the extra energy when the prices are low, storing it in an energy storage device and then using the stored energy when the priceOptimal Battery Configuration in a Residential Home with Time-of-Use Pricing Baris Aksanli

  8. Model Driven Configuration of Fault Tolerance Solutions for Component-Based Software System

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    - tural meta-model. Then, the impact of each component on the system reliability is automatically analyzedModel Driven Configuration of Fault Tolerance Solutions for Component-Based Software System Yihan Technologies (Ministry of Education) 2 School of Electronic Engineering & Computer Science, Peking University

  9. Numerical evaluation of one-loop diagrams near exceptional momentum configurations

    SciTech Connect (OSTI)

    Walter T Giele; Giulia Zanderighi; E.W.N. Glover

    2004-07-06T23:59:59.000Z

    One problem which plagues the numerical evaluation of one-loop Feynman diagrams using recursive integration by part relations is a numerical instability near exceptional momentum configurations. In this contribution we will discuss a generic solution to this problem. As an example we consider the case of forward light-by-light scattering.

  10. Model-driven Configuration of Cloud Computing Auto-scaling Infrastructure

    E-Print Network [OSTI]

    Schmidt, Douglas C.

    Model-driven Configuration of Cloud Computing Auto-scaling Infrastructure Brian Dougherty1 and Jules White2 and Douglas C. Schmidt1 1 Vanderbilt University briand,schmidt@dre.vanderbilt.edu 2 Virginia Tech julesw@vt.edu Abstract. Cloud computing uses virtualized computational resources to allow

  11. LAGEOS-type Satellites in Critical Supplementary Orbit Configuration and the Lense-Thirring Effect Detection

    E-Print Network [OSTI]

    Lorenzo Iorio; David M. Lucchesi

    2003-05-20T23:59:59.000Z

    In this paper we analyze quantitatively the concept of LAGEOS--type satellites in critical supplementary orbit configuration (CSOC) which has proven capable of yielding various observables for many tests of General Relativity in the terrestrial gravitational field, with particular emphasis on the measurement of the Lense--Thirring effect.

  12. LAGEOS--type Satellites in Critical Supplementary Orbit Configuration and the Lense--Thirring Effect Detection

    E-Print Network [OSTI]

    Iorio, L; Iorio, Lorenzo; Lucchesi, David M.

    2003-01-01T23:59:59.000Z

    In this paper we analyze quantitatively the concept of LAGEOS--type satellites in critical supplementary orbit configuration (CSOC) which has proven capable of yielding various observables for many tests of General Relativity in the terrestrial gravitational field, with particular emphasis on the measurement of the Lense--Thirring effect.

  13. Determination of Peptide Amide Configuration in a Model Amyloid Fibril by Solid-State NMR

    E-Print Network [OSTI]

    Griffin, Robert G.

    -42, with sequence LMVGGVVIA) forms a structured aggregate which is classified as an amyloid fibril based primarilyDetermination of Peptide Amide Configuration in a Model Amyloid Fibril by Solid-State NMR P. R these aggregates form. The primary constituent of the amyloid plaques characteristic of AD are a family of 39

  14. Introducing Automated Environment Configuration Testing in an Industrial Setting Caryna Pinheiro

    E-Print Network [OSTI]

    Sillito, Jonathan

    Introducing Automated Environment Configuration Testing in an Industrial Setting Caryna Pinheiro of Calgary {vgarousi,frank.maurer,sillito}@ucalgary.ca Abstract-- This paper presents an automated of staging environment instability in a large organization. We demonstrate how a suite of automated

  15. Field-reversed configuration formation scheme utilizing a spheromak and solenoid induction

    E-Print Network [OSTI]

    Ji, Hantao

    Field-reversed configuration formation scheme utilizing a spheromak and solenoid induction S. P FRC formation technique is described, where a spheromak transitions to a FRC with inductive current are suppressed; spheromaks with a lighter majority species, such as neon and helium, either display a terminal

  16. Optimal noise suppression in Fresnel incoherent correlation holography (FINCH) configured for

    E-Print Network [OSTI]

    Rosen, Joseph

    Optimal noise suppression in Fresnel incoherent correlation holography (FINCH) configured 131543); published 14 October 2010 An optimal setup in the sense of imaging resolution for the Fresnel of America OCIS codes: 090.1995, 030.6140, 110.4280. 1. Introduction Fresnel incoherent correlation

  17. Translocation of polymers with folded configurations across nanopores Stanislav Kotsev and Anatoly B. Kolomeiskya

    E-Print Network [OSTI]

    Translocation of polymers with folded configurations across nanopores Stanislav Kotsev and Anatoly August 2007; accepted 26 September 2007; published online 9 November 2007 The transport of polymers segment through the channel followed by the linear part of the polymer. The transition rates vary

  18. SPARQL SAHA, a Configurable Linked Data Editor and Browser as a Service

    E-Print Network [OSTI]

    Hyvnen, Eero

    SPARQL SAHA, a Configurable Linked Data Editor and Browser as a Service Eetu Mkel and Eero first.last@aalto.fi, http://www.seco.tkk.fi/ Abstract. SPARQL SAHA is a linked data editor and browser it was deduced that the SPARQL SAHA linked data editor and browser presented in this paper still has a particular

  19. Parallel Interleaver Architecture with New Scheduling Scheme for High Throughput Configurable Turbo Decoder

    E-Print Network [OSTI]

    Mellor-Crummey, John

    Parallel Interleaver Architecture with New Scheduling Scheme for High Throughput Configurable Turbo}@rice.edu, yuanbinguo@huawei.com Abstract--Parallel architecture is required for high throughput turbo decoder to meet also shows great flexibility and scalability compared to prior work. Index Terms--VLSI, turbo decoder

  20. CRAD, Configuration Management- Oak Ridge National Laboratory High Flux Isotope Reactor

    Broader source: Energy.gov [DOE]

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a February 2007 assessment of the Configuration Management Program in preparation for restart of the Oak Ridge National Laboratory, High Flux Isotope Reactor.

  1. Configuration Optimization of a Nanosphere Array on Top of a Thin Film Solar Cell

    E-Print Network [OSTI]

    Atwater, Harry

    solar cell fabrication. Index Terms -- Nanospheres, Whispering gallery modes, Photovoltaic systems is done. For a hexagonally close packed sphere configuration, we vary the size of the spheres as well in the photovoltaics industry [2]. II. DESCRIPTION OF THE MODEL Our approach here is to consider an array

  2. Degradation of transparent conductive oxides; Mechanistic insights across configurations and exposures

    E-Print Network [OSTI]

    Rollins, Andrew M.

    . An encapsulated configuration study was conducted on ITO and AZO, exposing samples to the above accel- erated applications, durability concerns arise. The cost and reliability of solar power are often cited as a primary been reported in thin film silicon solar modules123 , CIGS modules456 and OPV technologies78910

  3. Configuration of Smart Environments Made Simple Combining Visual Modeling with Semantic Metadata and Reasoning

    E-Print Network [OSTI]

    the configuration of smart homes to increase individual well-being, and reconfigurations of smart environments, and in particular the smart home by integrating ideas from pervasive computing and the Internet of Things (Io number of smart devices in their home and workplace environments and despite the necessary technologies

  4. Representation and Self-Configuration of Physical Entities in Extended Smart Grid Perimeter

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    . We describe these mechanisms and their implementation on examples from the home domain. Index Terms--Smart1 Representation and Self-Configuration of Physical Entities in Extended Smart Grid Perimeter Zheng of Smart Grids to Smart Energy Management Systems in relevant domains, we propose a framework and a set

  5. Self-configuration of "Home Abstraction Layer" via Sensor-Actuator Network

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    subsystems of the home/building that may be dealt with in a similar way. Keywords: Home as Smart Environment agenda[3], smart devices and smart environments. 2 Principle of the Home Abstraction Layer The HomeSelf-configuration of "Home Abstraction Layer" via Sensor-Actuator Network Zheng HU1,2 Gilles

  6. Business Process Configuration in The Cloud: How to Support and Analyze Multi-Tenant Processes?

    E-Print Network [OSTI]

    van der Aalst, Wil

    Business Process Configuration in The Cloud: How to Support and Analyze Multi-Tenant Processes? W on performance related problems. However, cloud computing will also change the way in which business processes are man- aged and supported, e.g., more and more organizations will be sharing common processes

  7. Pulse transmission transmitter including a higher order time derivate filter

    DOE Patents [OSTI]

    Dress Jr., William B.; Smith, Stephen F.

    2003-09-23T23:59:59.000Z

    Systems and methods for pulse-transmission low-power communication modes are disclosed. A pulse transmission transmitter includes: a clock; a pseudorandom polynomial generator coupled to the clock, the pseudorandom polynomial generator having a polynomial load input; an exclusive-OR gate coupled to the pseudorandom polynomial generator, the exclusive-OR gate having a serial data input; a programmable delay circuit coupled to both the clock and the exclusive-OR gate; a pulse generator coupled to the programmable delay circuit; and a higher order time derivative filter coupled to the pulse generator. The systems and methods significantly reduce lower-frequency emissions from pulse transmission spread-spectrum communication modes, which reduces potentially harmful interference to existing radio frequency services and users and also simultaneously permit transmission of multiple data bits by utilizing specific pulse shapes.

  8. Hydraulic engine valve actuation system including independent feedback control

    DOE Patents [OSTI]

    Marriott, Craig D

    2013-06-04T23:59:59.000Z

    A hydraulic valve actuation assembly may include a housing, a piston, a supply control valve, a closing control valve, and an opening control valve. The housing may define a first fluid chamber, a second fluid chamber, and a third fluid chamber. The piston may be axially secured to an engine valve and located within the first, second and third fluid chambers. The supply control valve may control a hydraulic fluid supply to the piston. The closing control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the second fluid chamber to the supply control valve. The opening control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the supply control valve to the second fluid chamber.

  9. Copper laser modulator driving assembly including a magnetic compression laser

    DOE Patents [OSTI]

    Cook, Edward G. (Livermore, CA); Birx, Daniel L. (Oakley, CA); Ball, Don G. (Livermore, CA)

    1994-01-01T23:59:59.000Z

    A laser modulator (10) having a low voltage assembly (12) with a plurality of low voltage modules (14) with first stage magnetic compression circuits (20) and magnetic assist inductors (28) with a common core (91), such that timing of the first stage magnetic switches (30b) is thereby synchronized. A bipolar second stage of magnetic compression (42) is coupled to the low voltage modules (14) through a bipolar pulse transformer (36) and a third stage of magnetic compression (44) is directly coupled to the second stage of magnetic compression (42). The low voltage assembly (12) includes pressurized boxes (117) for improving voltage standoff between the primary winding assemblies (34) and secondary winding (40) contained therein.

  10. Improving Planck calibration by including frequency-dependent relativistic corrections

    E-Print Network [OSTI]

    Quartin, Miguel

    2015-01-01T23:59:59.000Z

    The Planck satellite detectors are calibrated in the 2015 release using the "orbital dipole", which is the time-dependent dipole generated by the Doppler effect due to the motion of the satellite around the Sun. Such an effect has also relativistic time-dependent corrections of relative magnitude 10^(-3), due to coupling with the "solar dipole" (the motion of the Sun compared to the CMB rest frame), which are included in the data calibration by the Planck collaboration. We point out that such corrections are subject to a frequency-dependent multiplicative factor. This factor differs from unity especially at the highest frequencies, relevant for the HFI instrument. Since currently Planck calibration errors are dominated by systematics, to the point that polarization data is currently unreliable at large scales, such a correction can in principle be highly relevant for future data releases.

  11. Protoplanetary disks including radiative feedback from accreting planets

    E-Print Network [OSTI]

    Montesinos, Matias; Perez, Sebastian; Baruteau, Clement; Casassus, Simon

    2015-01-01T23:59:59.000Z

    While recent observational progress is converging on the detection of compact regions of thermal emission due to embedded protoplanets, further theoretical predictions are needed to understand the response of a protoplanetary disk to the planet formation radiative feedback. This is particularly important to make predictions for the observability of circumplanetary regions. In this work we use 2D hydrodynamical simulations to examine the evolution of a viscous protoplanetary disk in which a luminous Jupiter-mass planet is embedded. We use an energy equation which includes the radiative heating of the planet as an additional mechanism for planet formation feedback. Several models are computed for planet luminosities ranging from $10^{-5}$ to $10^{-3}$ Solar luminosities. We find that the planet radiative feedback enhances the disk's accretion rate at the planet's orbital radius, producing a hotter and more luminous environement around the planet, independently of the prescription used to model the disk's turbul...

  12. Actuator assembly including a single axis of rotation locking member

    DOE Patents [OSTI]

    Quitmeyer, James N.; Benson, Dwayne M.; Geck, Kellan P.

    2009-12-08T23:59:59.000Z

    An actuator assembly including an actuator housing assembly and a single axis of rotation locking member fixedly attached to a portion of the actuator housing assembly and an external mounting structure. The single axis of rotation locking member restricting rotational movement of the actuator housing assembly about at least one axis. The single axis of rotation locking member is coupled at a first end to the actuator housing assembly about a Y axis and at a 90.degree. angle to an X and Z axis providing rotation of the actuator housing assembly about the Y axis. The single axis of rotation locking member is coupled at a second end to a mounting structure, and more particularly a mounting pin, about an X axis and at a 90.degree. angle to a Y and Z axis providing rotation of the actuator housing assembly about the X axis. The actuator assembly is thereby restricted from rotation about the Z axis.

  13. A Case for Including Transactions in OpenMP

    SciTech Connect (OSTI)

    Wong, M; Bihari, B L; de Supinski, B R; Wu, P; Michael, M; Liu, Y; Chen, W

    2010-01-25T23:59:59.000Z

    Transactional Memory (TM) has received significant attention recently as a mechanism to reduce the complexity of shared memory programming. We explore the potential of TM to improve OpenMP applications. We combine a software TM (STM) system to support transactions with an OpenMP implementation to start thread teams and provide task and loop-level parallelization. We apply this system to two application scenarios that reflect realistic TM use cases. Our results with this system demonstrate that even with the relatively high overheads of STM, transactions can outperform OpenMP critical sections by 10%. Overall, our study demonstrates that extending OpenMP to include transactions would ease programming effort while allowing improved performance.

  14. Configuring Entourage 2008 w/ Exchange Web Services. Note: These instruction assume that the Exchange Web Services (EWS) Update

    E-Print Network [OSTI]

    Blackwell, Keith

    Configuring Entourage 2008 w/ Exchange Web Services. Note: These instruction assume that the Exchange Web Services (EWS) Update , also known as Entourage 13.0, has already been

  15. Extractant composition including crown ether and calixarene extractants

    DOE Patents [OSTI]

    Meikrantz, David H. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Riddle, Catherine L. (Idaho Falls, ID); Law, Jack D. (Pocalello, ID); Peterman, Dean R. (Idaho Falls, ID); Mincher, Bruce J. (Idaho Falls, ID); McGrath, Christopher A. (Blackfoot, ID); Baker, John D. (Blackfoot, ID)

    2009-04-28T23:59:59.000Z

    An extractant composition comprising a mixed extractant solvent consisting of calix[4] arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The DtBu18C6 may be present at from approximately 0.01M to approximately 0.4M, such as at from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present at from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The extractant composition further comprises an aqueous phase. The mixed extractant solvent may be used to remove cesium and strontium from the aqueous phase.

  16. DETECTION OF SUBSURFACE FACILITIES INCLUDING NON-METALLIC PIPE

    SciTech Connect (OSTI)

    Mr. Herb Duvoisin

    2003-05-26T23:59:59.000Z

    CyTerra has leveraged our unique, shallow buried plastic target detection technology developed under US Army contracts into deeper buried subsurface facilities and including nonmetallic pipe detection. This Final Report describes a portable, low-cost, real-time, and user-friendly subsurface plastic pipe detector (LULU- Low Cost Utility Location Unit) that relates to the goal of maintaining the integrity and reliability of the nation's natural gas transmission and distribution network by preventing third party damage, by detecting potential infringements. Except for frequency band and antenna size, the LULU unit is almost identical to those developed for the US Army. CyTerra designed, fabricated, and tested two frequency stepped GPR systems, spanning the frequencies of importance (200 to 1600 MHz), one low and one high frequency system. Data collection and testing was done at a variety of locations (selected for soil type variations) on both targets of opportunity and selected buried targets. We developed algorithms and signal processing techniques that provide for the automatic detection of the buried utility lines. The real time output produces a sound as the radar passes over the utility line alerting the operator to the presence of a buried object. Our unique, low noise/high performance RF hardware, combined with our field tested detection algorithms, represents an important advancement toward achieving the DOE potential infringement goal.

  17. Hydrodynamic Simulation of Supernova Remnants Including Efficient Particle Acceleration

    E-Print Network [OSTI]

    Donald C. Ellison; Anne Decourchelle; Jean Ballet

    2003-08-19T23:59:59.000Z

    A number of supernova remnants (SNRs) show nonthermal X-rays assumed to be synchrotron emission from shock accelerated TeV electrons. The existence of these TeV electrons strongly suggests that the shocks in SNRs are sources of galactic cosmic rays (CRs). In addition, there is convincing evidence from broad-band studies of individual SNRs and elsewhere that the particle acceleration process in SNRs can be efficient and nonlinear. If SNR shocks are efficient particle accelerators, the production of CRs impacts the thermal properties of the shock heated, X-ray emitting gas and the SNR evolution. We report on a technique that couples nonlinear diffusive shock acceleration, including the backreaction of the accelerated particles on the structure of the forward and reverse shocks, with a hydrodynamic simulation of SNR evolution. Compared to models which ignore CRs, the most important hydrodynamical effects of placing a significant fraction of shock energy into CRs are larger shock compression ratios and lower temperatures in the shocked gas. We compare our results, which use an approximate description of the acceleration process, with a more complete model where the full CR transport equations are solved (i.e., Berezhko et al., 2002), and find excellent agreement for the CR spectrum summed over the SNR lifetime and the evolving shock compression ratio. The importance of the coupling between particle acceleration and SNR dynamics for the interpretation of broad-band continuum and thermal X-ray observations is discussed.

  18. cDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

    1999-05-04T23:59:59.000Z

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

  19. CDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

    1995-03-21T23:59:59.000Z

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

  20. cDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

    1995-03-21T23:59:59.000Z

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 11 figures.

  1. cDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

    1999-05-04T23:59:59.000Z

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 12 figs.

  2. C -parameter distribution at N 3 LL ' including power corrections

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hoang, Andr H.; Kolodrubetz, Daniel W.; Mateu, Vicent; Stewart, Iain W.

    2015-05-01T23:59:59.000Z

    We compute the e?e? C-parameter distribution using the soft-collinear effective theory with a resummation to next-to-next-to-next-to-leading-log prime accuracy of the most singular partonic terms. This includes the known fixed-order QCD results up to O(?3s), a numerical determination of the two-loop nonlogarithmic term of the soft function, and all logarithmic terms in the jet and soft functions up to three loops. Our result holds for C in the peak, tail, and far tail regions. Additionally, we treat hadronization effects using a field theoretic nonperturbative soft function, with moments ?n. To eliminate an O(?QCD) renormalon ambiguity in the soft function, we switch from the MS to a short distance Rgap scheme to define the leading power correction parameter ?1. We show how to simultaneously account for running effects in ?1 due to renormalon subtractions and hadron-mass effects, enabling power correction universality between C-parameter and thrust to be tested in our setup. We discuss in detail the impact of resummation and renormalon subtractions on the convergence. In the relevant fit region for ?s(mZ) and ?1, the perturbative uncertainty in our cross section is ? 2.5% at Q=mZ.

  3. Interim performance criteria for photovoltaic energy systems. [Glossary included

    SciTech Connect (OSTI)

    DeBlasio, R.; Forman, S.; Hogan, S.; Nuss, G.; Post, H.; Ross, R.; Schafft, H.

    1980-12-01T23:59:59.000Z

    This document is a response to the Photovoltaic Research, Development, and Demonstration Act of 1978 (P.L. 95-590) which required the generation of performance criteria for photovoltaic energy systems. Since the document is evolutionary and will be updated, the term interim is used. More than 50 experts in the photovoltaic field have contributed in the writing and review of the 179 performance criteria listed in this document. The performance criteria address characteristics of present-day photovoltaic systems that are of interest to manufacturers, government agencies, purchasers, and all others interested in various aspects of photovoltaic system performance and safety. The performance criteria apply to the system as a whole and to its possible subsystems: array, power conditioning, monitor and control, storage, cabling, and power distribution. They are further categorized according to the following performance attributes: electrical, thermal, mechanical/structural, safety, durability/reliability, installation/operation/maintenance, and building/site. Each criterion contains a statement of expected performance (nonprescriptive), a method of evaluation, and a commentary with further information or justification. Over 50 references for background information are also given. A glossary with definitions relevant to photovoltaic systems and a section on test methods are presented in the appendices. Twenty test methods are included to measure performance characteristics of the subsystem elements. These test methods and other parts of the document will be expanded or revised as future experience and needs dictate.

  4. Monte Carlo configuration interaction with perturbation corrections for dissociation energies of first row diatomic molecules: C{sub 2}, N{sub 2}, O{sub 2}, CO, and NO

    SciTech Connect (OSTI)

    Kelly, Thomas P.; Greer, James C., E-mail: jim.greer@tyndall.ie [Tyndall National Institute, University College Cork, Dyke Parade, Lee Maltings, Cork (Ireland); Perera, Ajith; Bartlett, Rodney J. [Quantum Theory Project, 2234 New Physics Building 92, PO Box 118435, University of Florida at Gainesville, Gainesville, Florida 32611-8435 (United States)] [Quantum Theory Project, 2234 New Physics Building 92, PO Box 118435, University of Florida at Gainesville, Gainesville, Florida 32611-8435 (United States)

    2014-02-28T23:59:59.000Z

    Dissociation energies for the diatomic molecules C{sub 2}, N{sub 2}, O{sub 2}, CO, and NO are estimated using the Monte Carlo configuration interaction (MCCI) and augmented by a second order perturbation theory correction. The calculations are performed using the correlation consistent polarized valence triple zeta atomic orbital basis and resulting dissociation energies are compared to coupled cluster calculations including up to triple excitations (CCSDT) and Full Configuration Interaction Quantum Monte Carlo (FCIQMC) estimates. It is found that the MCCI method readily describes the correct behavior for dissociation for the diatomics even when capturing only a relatively small fraction (?80%) of the correlation energy. At this level only a small number of configurations, typically O(10{sup 3}) from a FCI space of dimension O(10{sup 14}), are required to describe dissociation. Including the perturbation correction to the MCCI estimates, the difference in dissociation energies with respect to CCSDT ranges between 1.2 and 3.1 kcal/mol, and the difference when comparing to FCIQMC estimates narrows to between 0.5 and 1.9 kcal/mol. Discussions on MCCI's ability to recover static and dynamic correlations and on the form of correlations in the electronic configuration space are presented.

  5. Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza

    SciTech Connect (OSTI)

    HCTT-CHE

    2011-04-14T23:59:59.000Z

    The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disasterreadiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just thathelp strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners' (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. While the purpose of the CAT is to further prepare the community for an influenza pandemic, its framework is an extension of the traditional all-hazards approach to planning and preparedness. As such, the information gathered by the tool is useful in preparation for most widespread public health emergencies. This tool is primarily intended for use by those involved in healthcare emergency preparedness (e.g., community planners, community disaster preparedness coordinators, 9-1-1 directors, hospital emergency preparedness coordinators). It is divided into sections based on the core agency partners, which may be involved in the community's influenza pandemic influenza response.

  6. Overall Power Core Configuration and System Integration for ARIES-ACT1 Fusion Power Plant , M.S. Tillack1

    E-Print Network [OSTI]

    California at San Diego, University of

    Overall Power Core Configuration and System Integration for ARIES-ACT1 Fusion Power Plant X.R. Wang Consulting, Fliederweg 3, D 76351 Linkenheim-Hochstetten, GERMANY, smalang@web.de ARIES-ACT1 power plant has been designed and configured to allow for rapid removal of the full power core sectors followed

  7. Research on Pinches driven by SPEED 2 Generator: Hard X-ray and Neutron Emission in Plasma Focus Configuration.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Research on Pinches driven by SPEED 2 Generator: Hard X-ray and Neutron Emission in Plasma Focus works developed in SPEED2 at Düsseldorf were done in a plasma focus configuration for soft X considers experiments in different pinch configurations (plasma focus, gas puffed plasma focus, gas embedded

  8. A general end point free energy calculation method based on microscopic configurational space coarse-graining

    E-Print Network [OSTI]

    Tian, Pu

    2015-01-01T23:59:59.000Z

    Free energy is arguably the most important thermodynamic property for physical systems. Despite the fact that free energy is a state function, presently available rigorous methodologies, such as those based on thermodynamic integration (TI) or non-equilibrium work (NEW) analysis, involve energetic calculations on path(s) connecting the starting and the end macrostates. Meanwhile, presently widely utilized approximate end-point free energy methods lack rigorous treatment of conformational variation within end macrostates, and are consequently not sufficiently reliable. Here we present an alternative and rigorous end point free energy calculation formulation based on microscopic configurational space coarse graining, where the configurational space of a high dimensional system is divided into a large number of sufficiently fine and uniform elements, which were termed conformers. It was found that change of free energy is essentially decided by change of the number of conformers, with an error term that accounts...

  9. An object-oriented approach to deploying highly configurable web interfaces for the ATLAS experiment

    E-Print Network [OSTI]

    Lange Ramos, Bruno; The ATLAS collaboration; Pommes, Kathy; Pavani Neto, Varlen; Vieira Arosa, Breno

    2015-01-01T23:59:59.000Z

    In order to manage a heterogeneous and worldwide collaboration, the ATLAS experiment develops web systems that range from supporting the process of publishing scientific papers to monitoring equipment radiation levels. These systems are vastly supported by Glance, a technology that was set forward in 2004 to create an abstraction layer on top of varied databases that automatically recognizes their modeling and generate web search interfaces. Fence (Front ENd ENgine for glaNCE) assembles classes to build applications by making extensive use of configuration files. It produces templates of the core JSON files on top of which it is possible to create Glance-compliant search interfaces. Once the database, its schemas and tables are defined using Glance, its records can be incorporated into the templates by escaping the returned values with a reference to the column identifier wrapped around double enclosing brackets. The developer may also expand on available configuration files to create HTML forms and securely ...

  10. An object-oriented approach to deploying highly configurable Web interfaces for the ATLAS experiment

    E-Print Network [OSTI]

    Lange Ramos, Bruno; The ATLAS collaboration; Pommes, Kathy; Pavani Neto, Varlen; Vieira Arosa, Breno; Abreu Da Silva, Igor

    2015-01-01T23:59:59.000Z

    The ATLAS Technical Coordination disposes of 17 Web systems to support its operation. These applications, whilst ranging from supporting the process of publishing scientific papers to monitoring radiation levels in the equipment at the cave, are constantly prone to changes in requirements due to the collaborative nature of the experiment and its management. In this context, a Web framework is proposed to unify the generation of the supporting interfaces. Fence assembles classes to build applications by making extensive use of JSON configuration files. It relies vastly on Glance, a technology that was set forth in 2003 to create an abstraction layer on top of the heterogeneous sources that store the technical coordination data. Once Glance maps out the database modeling, records can be referenced in the configuration files by wrapping unique identifiers around double enclosing brackets. The deployed content can be individually secured by attaching clearance attributes to their description thus ensuring that vi...

  11. An approximate model for the performance and acoustic predictions of counterrotating propeller configurations

    E-Print Network [OSTI]

    Denner, Brett William

    1989-01-01T23:59:59.000Z

    at three advance ratios Noise levels and frequency spectra were calculated at s. number of locations around the configuration. The directivity patterns of the harmonics in both the horizontal and vertical planes were examined, with the conclusion... that the noise levels of the even harmonics are relatively independent of direction whereas the noise levels of the odd harmonics are extremely dependent on azimuthal direction in the horizontal plane The equations of Succi are examined to explain...

  12. A Counterexample to a Generalized Saari's Conjecture with a Continuum of Central Configurations

    E-Print Network [OSTI]

    Manuele Santoprete

    2009-09-27T23:59:59.000Z

    In this paper we show that in the $n$-body problem with harmonic potential one can find a continuum of central configurations for $n=3$. Moreover we show a counterexample to an interpretation of Jerry Marsden Generalized Saari's conjecture. This will help to refine our understanding and formulation of the Generalized Saari's conjecture, and in turn it might provide insight in how to solve the classical Saari's conjecture for $n\\geq 4$.

  13. A Counterexample to a Generalized Saari's Conjecture with a Continuum of Central Configurations

    E-Print Network [OSTI]

    Santoprete, Manuele

    2009-01-01T23:59:59.000Z

    In this paper we show that in the $n$-body problem with harmonic potential one can find a continuum of central configurations for $n=3$. Moreover we show a counterexample to an interpretation of Jerry Marsden Generalized Saari's conjecture. This will help to refine our understanding and formulation of the Generalized Saari's conjecture, and in turn it might provide insight in how to solve the classical Saari's conjecture for $n\\geq 4$.

  14. Spectral statistics of rare-earth nuclei: Investigation of shell model configuration effect

    E-Print Network [OSTI]

    Sabri, H

    2015-01-01T23:59:59.000Z

    The spectral statistics of even-even rare-earth nuclei are investigated by using all the available empirical data for Ba, Ce, Nd, Sm, Gd, Dy, Er, Yb and Hf isotopes. The Berry- Robnik distribution and Maximum Likelihood estimation technique are used for analyses. An obvious deviation from GOE is observed for considered nuclei and there are some suggestions about the effect due to mass, deformation parameter and shell model configurations.

  15. Electron density and temperature profile diagnostics for C-2 field reversed configuration plasmas

    SciTech Connect (OSTI)

    Deng, B. H.; Kinley, J. S.; Schroeder, J. [Tri Alpha Energy, Inc., Rancho Santa Margarita, California 92688 (United States)

    2012-10-15T23:59:59.000Z

    The 9-point Thomson scattering diagnostic system for the C-2 field reversed configuration plasmas is improved and the measured electron temperature profiles are consistent with theoretical expectations. Rayleigh scattering revealed a finite line width of the ruby laser emission, which complicates density calibration. Taking advantage of the plasma wobble motion, density profile reconstruction accuracy from the 6-chord two-color CO{sub 2}/HeNe interferometer data is improved.

  16. Multiparticle-multihole configuration mixing description of nuclear many-body systems

    SciTech Connect (OSTI)

    Robin, C.; Pillet, N.; Le Bloas, J.; Berger, J.-F. [CEA/DAM/DIF, F-91297 Arpajon (France); Zelevinsky, V. G. [Department of Physics and Astronomy and National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, Michigan 48824 (United States)

    2014-10-15T23:59:59.000Z

    In this work we discuss the multiparticle-multihole configuration mixing method which aims to describe the structure of atomic nuclei. Based on a variational principle it is able to treat in a unified way all types of long-range correlations between nucleons, without introducing symmetry breaking. The formalism is presented along with some preliminary results obtained for a few sd-shell nuclei. In the presented applications, the D1S Gogny force has been used.

  17. T-562: Novell ZENworks Configuration Management novell-tftp.exe Buffer Overflow

    Broader source: Energy.gov [DOE]

    A vulnerability has been reported in Novell ZENworks Configuration Management, which can be exploited by malicious people to compromise a vulnerable system. The vulnerability is caused due to a boundary error in novell-tftp.exe when parsing requests. This can be exploited to cause a heap-based buffer overflow via a specially crafted request sent to UDP port 69. The vulnerability is reported in versions 10.3.1, 10.3.2, and 11.0.

  18. Spectral statistics of rare-earth nuclei: Investigation of shell model configuration effect

    E-Print Network [OSTI]

    H. Sabri

    2015-06-11T23:59:59.000Z

    The spectral statistics of even-even rare-earth nuclei are investigated by using all the available empirical data for Ba, Ce, Nd, Sm, Gd, Dy, Er, Yb and Hf isotopes. The Berry- Robnik distribution and Maximum Likelihood estimation technique are used for analyses. An obvious deviation from GOE is observed for considered nuclei and there are some suggestions about the effect due to mass, deformation parameter and shell model configurations.

  19. Software solutions manage the definition, operation, maintenance and configuration control of the National Ignition Facility

    SciTech Connect (OSTI)

    Dobson, D; Churby, A; Krieger, E; Maloy, D; White, K

    2011-07-25T23:59:59.000Z

    The National Ignition Facility (NIF) is the world's largest laser composed of millions of individual parts brought together to form one massive assembly. Maintaining control of the physical definition, status and configuration of this structure is a monumental undertaking yet critical to the validity of the shot experiment data and the safe operation of the facility. The NIF business application suite of software provides the means to effectively manage the definition, build, operation, maintenance and configuration control of all components of the National Ignition Facility. State of the art Computer Aided Design software applications are used to generate a virtual model and assemblies. Engineering bills of material are controlled through the Enterprise Configuration Management System. This data structure is passed to the Enterprise Resource Planning system to create a manufacturing bill of material. Specific parts are serialized then tracked along their entire lifecycle providing visibility to the location and status of optical, target and diagnostic components that are key to assessing pre-shot machine readiness. Nearly forty thousand items requiring preventive, reactive and calibration maintenance are tracked through the System Maintenance & Reliability Tracking application to ensure proper operation. Radiological tracking applications ensure proper stewardship of radiological and hazardous materials and help provide a safe working environment for NIF personnel.

  20. Observation of ?-vibrations and alignments built on non-ground-state configurations in ??Dy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhu, C. -H.; Hartley, D. J.; Riedinger, L. L.; Sharpey-Schafer, J. F.; Almond, J. M.; Beausang, C.; Carpenter, M. P.; Chiara, C. J.; Cooper, N.; Curien, D.; et al

    2015-03-01T23:59:59.000Z

    The exact nature of the lowest K?=2? rotational bands in all deformed nuclei remains obscure. Traditionally they are assumed to be collective vibrations of the nuclear shape in the ? degree of freedom perpendicular to the nuclear symmetry axis. Very few such ?-bands have been traced past the usual back-bending rotational alignments of high-j nucleons. We have investigated the structure of positive-parity bands in the N=90 nucleus ??Dy, using the ??Nd(C,4n)??Dy reaction at 65 MeV, observing the resulting ?-ray transitions with the Gammasphere array. The even- and odd-spin members of the ?=2? ?-band are observed to 32? and 31? respectively.moreThis rotational band faithfully tracks the ground-state configuration to the highest spins. The members of a possible ?-vibration built on the aligned yrast S-band are observed to spins 28? and 27?. An even-spin positive-parity band, observed to spin 24?, is a candidate for an aligned S-band built on the seniority-zero configuration of the 0?? state at 676 keV. The crossing of this band with the 0?? band is at hwc = 0.28(1) MeV and is consistent with the configuration of the 0?? band not producing any blocking of the monopole pairing.less

  1. Passive Superconducting Flux Conservers for Rotating-Magnetic-Field-Driven Field-Reversed Configurations

    SciTech Connect (OSTI)

    E. Oz, C.E. Myers, M.R. Edwards, B. Berlinger, A. Brooks, and S.A. Cohen

    2011-01-05T23:59:59.000Z

    The Princeton Field-Reversed Configuration (PFRC) experiment employs an odd-parity rotating magnetic field (RMFo) current drive and plasma heating system to form and sustain high-? plasmas. For radial confinement, an array of coaxial, internal, passive, flux-conserving (FC) rings applies magnetic pressure to the plasma while still allowing radio-frequency RMFo from external coils to reach the plasma. The 3 ms pulse duration of the present experiment is limited by the skin time (?fc) of its room-temperature copper FC rings. To explore plasma phenomena with longer characteristic times, the pulse duration of the next-generation PFRC-2 device will exceed 100 ms, necessitating FC rings with (?fc > 300 ms. In this paper we review the physics of internal, discrete, passive FCs and describe the evolution of the PFRC's FC array. We then detail new experiments that have produced higher performance FC rings that contain embedded high-temperature superconducting (HTS) tapes. Several HTS tape winding configurations have been studied and a wide range of extended skin times, from 0.4 s to over 103 s, has been achieved. The new FC rings must carry up to 3 kA of current to balance the expected PFRC-2 plasma pressure, so the dependence of the HTS-FC critical current on the winding configuration and temperature was also studied. From these experiments, the key HTS-FC design considerations have been identified and HTS-FC rings with the desired performance characteristics have been produced.

  2. Observation of ?-vibrations and alignments built on non-ground-state configurations in ??Dy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhu, C. -H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hartley, D. J. [US Naval Academy, Annapolis, MD (United States); Riedinger, L. L. [Univ. of Tennessee, Knoxville, TN (United States); Sharpey-Schafer, J. F. [Univ. of Western Cape, Bellville (South Africa); Almond, J. M. [Univ. of Richmond, Richmond, VA (United States); Beausang, C. [Univ. of Richmond, Richmond, VA (United States); Carpenter, M. P. [Argonne National Lab. (ANL), Argonne, IL (United States); Chiara, C. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Cooper, N. [Yale Univ., New Haven, CT (United States); Curien, D. [Univ. de Strasbourg, Strasbourg (France); Gall, B. J. P. [Univ. de Strasbourg, Strasbourg (France); Garrett, P. E. [Univ. of Guelph, ON (Canada); Janssens, R. V. F. [Argonne National Lab. (ANL), Argonne, IL (United States); Kondev, F. G. [Argonne National Lab. (ANL), Argonne, IL (United States); Kulp, W. D. [Georgia Inst. of Technology, Atlanta, GA (United States); Lauritsen, T. [Argonne National Lab. (ANL), Argonne, IL (United States); McCutchan, E. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Brookhaven National Lab. (BNL), Upton, NY (United States); Miller, D. [Univ. of Tennessee, Knoxville, TN (United States); Piot, J. [Univ. de Strasbourg, Strasbourg (France); Redon, N. [Inst. de Physique Nucleaire Lyon, Villeurbanne (France); Riley, M. A. [Florida State Univ., Tallahassee, FL (United States); Simpson, J. [Science and Technology Facilities Council (STFC), Daresbury (United Kingdom). Daresbury Lab.; Stefanescu, I. [Argonne National Lab. (ANL), Argonne, IL (United States); Werner, V. [Yale Univ., New Haven, CT (United States); Wang, X. [Florida State Univ., Tallahassee, FL (United States); Wood, J. L. [Georgia Inst. of Technology, Atlanta, GA (United States); Majola, S. N. T. [iThemba LABS, National Research Foundation, Somerset-West (South Africa); Univ. of Cape Town, Rondebosch (South Africa); Zhu, S. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-03-01T23:59:59.000Z

    The exact nature of the lowest K?=2? rotational bands in all deformed nuclei remains obscure. Traditionally they are assumed to be collective vibrations of the nuclear shape in the ? degree of freedom perpendicular to the nuclear symmetry axis. Very few such ?-bands have been traced past the usual back-bending rotational alignments of high-j nucleons. We have investigated the structure of positive-parity bands in the N=90 nucleus ??Dy, using the ??Nd(C,4n)??Dy reaction at 65 MeV, observing the resulting ?-ray transitions with the Gammasphere array. The even- and odd-spin members of the ?=2? ?-band are observed to 32? and 31? respectively. This rotational band faithfully tracks the ground-state configuration to the highest spins. The members of a possible ?-vibration built on the aligned yrast S-band are observed to spins 28? and 27?. An even-spin positive-parity band, observed to spin 24?, is a candidate for an aligned S-band built on the seniority-zero configuration of the 0?? state at 676 keV. The crossing of this band with the 0?? band is at hwc = 0.28(1) MeV and is consistent with the configuration of the 0?? band not producing any blocking of the monopole pairing.

  3. Configuration management plan for waste tank farms and the 242-A evaporator of tank waste remediation system

    SciTech Connect (OSTI)

    Laney, T.

    1994-08-30T23:59:59.000Z

    The configuration management architecture presented in this Configuration Management Plan is based on the functional model established by DOE-STD-1073-93, ``Guide for Operational Configuration Management Program.`` The DOE Standard defines the configuration management program by the five basic program elements of ``program management,`` ``design requirements,`` ``document control,`` ``change control,`` and ``assessments,`` and the two adjunct recovery programs of ``design reconstitution,`` and ``material condition and aging management.`` The CM model of five elements and two adjunct programs strengthen the necessary technical and administrative control to establish and maintain a consistent technical relationship among the requirements, physical configuration, and documentation. Although the DOE Standard was originally developed for the operational phase of nuclear facilities, this plan has the flexibility to be adapted and applied to all life-cycle phases of both nuclear and non-nuclear facilities. The configuration management criteria presented in this plan endorses the DOE Standard and has been tailored specifically to address the technical relationship of requirements, physical configuration, and documentation during the full life cycle of the Waste Tank Farms and 242-A Evaporator of Tank Waste Remediation System.

  4. The use of spin-pure and non-orthogonal Hilbert spaces in Full Configuration Interaction Quantum Monte-Carlo

    E-Print Network [OSTI]

    Smart, Simon Daniel

    2014-02-04T23:59:59.000Z

    The use of spin-pure and non-orthogonal Hilbert spaces in Full Configuration Interaction Quantum MonteCarlo Simon Smart Trinity College This dissertation is submitted for the degree of Doctor of Philosophy at the University of Cambridge, December... 2013 For my mother Diana Jean Smart 1956-2013 The use of spin-pure and non-orthogonal Hilbert spaces in Full Configuration Interaction Quantum MonteCarlo Simon Smart Abstract Full Configuration Interaction Quantum MonteCarlo (FCIQMC) al- lows...

  5. The separatrix radius measurement of field-reversed configuration plasma in FRX-L

    SciTech Connect (OSTI)

    Zhang, S. (Shouyin); Tejero, E. M. (Erik M.); Taccetti, J. M. (Jose Martin); Wurden, G. A. (Glen A.); Intrator, Thomas; Waganaar, W. J. (William J.)

    2004-01-01T23:59:59.000Z

    Magnetic pick-up coils and single turn flux loops are installed on the FRX-L device. The combination of the two measurements provides the excluded flux radius that approximates the separatrix radius of the field-reversed configuration plasma. Arrays of similar probes are used to map out local magnetic field dynamics beyond both ends of the theta-coil confinement region to help understand the effects of cusp locations on flux trapping during the FRC formation process. Details on the probe design and system calibrations are presented. The overall system calibration of excluded flux radius measurement is examined by replacing FRC plasma with a known radius aluminum conductor cylinder.

  6. Isotope Shifts in Beryllium-, Boron-, Carbon-, and Nitrogen-like Ions from Relativistic Configuration Interaction Calculations

    E-Print Network [OSTI]

    Naz, C; Rynkun, P; Gaigalas, G; Godefroid, M; Jnsson, P

    2014-01-01T23:59:59.000Z

    Energy levels, normal and specific mass shift parameters as well as electronic densities at the nucleus are reported for numerous states along the beryllium, boron, carbon, and nitrogen isoelectronic sequences. Combined with nuclear data, these electronic parameters can be used to determine values of level and transition isotope shifts. The calculation of the electronic parameters is done using first-order perturbation theory with relativistic configuration interaction wave functions that account for valence, core-valence and core-core correlation effects as zero-order functions. Results are compared with experimental and other theoretical values, when available.

  7. Gas-puff liner implosion in the configuration with helical current return rods

    SciTech Connect (OSTI)

    Sorokin, S. A., E-mail: s.sorokin@rambler.ru [Russian Academy of Sciences, Institute of High Current Electronics, Siberian Branch (Russian Federation)

    2013-02-15T23:59:59.000Z

    Results of experiments with double-shell gas-puff liners carried out on a high-current MIG generator (2 MA, 80 ns) are presented. To stabilize the process of liner implosion and increase the efficiency of energy transfer from the generator to the liner plasma, a current return in the form of a multifilar helix was used. The effect of the configuration of the current return on the parameters of the generated pulses of argon and neon K-shell radiation (with photon energies of 3-5 and 0.9-1.5 keV, respectively) and the neutron yield from a deuterium liner were studied.

  8. Reduced matrix elements of spinspin interactions for the atomic f-electron configurations

    SciTech Connect (OSTI)

    Yeung, Y.Y., E-mail: yeungy@acm.org

    2014-03-15T23:59:59.000Z

    A re-examination of some major references on the intra-atomic magnetic interactions over the last six decades reveals that there exist some gaps or puzzles concerning the previous studies of the spinspin interactions for the atomic f-shell electrons. Hence, tables are provided for the relevant reduced matrix elements of the four double-tensor operators z{sub r} (r=1,2,3, and 4) of rank 2 in both the orbital and spin spaces. The range of the tables covers all states of the configurations from f{sup 4} to f{sup 7}.

  9. The configuration and sediments of Stetson Bank, northwestern Gulf of Mexico

    E-Print Network [OSTI]

    Neumann, Andrew Conrad

    1958-01-01T23:59:59.000Z

    are generally fine- grained, silty sands with varying amounts of shell. Coarse, gravelly aggregates of shell and rock debris are found near the base of the bank. The name "Stetson Bank" was proposed by Francis P. Shepard in honor of the late marine geologist... THE SEDIIKNTARY ROCK OUTCROP OF STETSON BANK SEDIMENTARY PROPERTIES 61 MACROFAUNA 74 DISCUSSION 80 CONFIGURATION OF THE BANK 80 AGE AND ORIGIN OF THE OUTCROPPING ROCKS 83 TABIZ Ol CDllT ~ITS CON'T. Page No. THE SEDIIKNTARY ENVIRONIKNT SURROUNDING THE BANK...

  10. Octet baryon magnetic moments in the chiral quark model with configuration mixing

    SciTech Connect (OSTI)

    Linde, J.; Ohlsson, T.; Snellman, H. [Theoretical Physics, Department of Physics, Royal Institute of Technology, SE-100 44 Stockholm (Sweden)] [Theoretical Physics, Department of Physics, Royal Institute of Technology, SE-100 44 Stockholm (Sweden)

    1998-01-01T23:59:59.000Z

    The Coleman{endash}Glashow sum-rule for magnetic moments is always fulfilled in the chiral quark model, independently of SU(3) symmetry breaking. This is due to the structure of the wave functions, coming from the non-relativistic quark model. Experimentally, the Coleman{endash}Glashow sum-rule is violated by about ten standard deviations. To overcome this problem, two models of wave functions with configuration mixing are studied. One of these models violates the Coleman{endash}Glashow sum-rule to the right degree and also reproduces the octet baryon magnetic moments rather accurately. {copyright} {ital 1997} {ital The American Physical Society}

  11. Relativistic configuration-interaction calculation of the correlation energies of heliumlike ions. Revision 1

    SciTech Connect (OSTI)

    Cheng, K.T.; Chen, M.H. [Lawrence Livermore National Lab., CA (United States); Johnson, W.R. [Univ. of Notre Dame, IN (United States). Physics Dept.

    1994-04-01T23:59:59.000Z

    A new relativistic configuration-interaction (CI) method using B-spline basis functions has been developed to study the correlation energies of two-electron heliumlike ions. Based on the relativistic no-pair Hamiltonian, the CI equation leads to a symmetric eigenvalue problem involving large, dense matrices. Davidson`s method is used to obtain the lowest few eigenenergies and eigenfunctions. Results on transition energies and finite structure splittings for heliumlike ions are in very good agreement with experiment throughout the periodic table.

  12. A novel configuration model for random graphs with given degree sequence

    E-Print Network [OSTI]

    Xinping Xu; Feng Liu

    2007-08-20T23:59:59.000Z

    Recently, random graphs in which vertices are characterized by hidden variables controlling the establishment of edges between pairs of vertices have attracted much attention. Here, we present a specific realization of a class of random network models in which the connection probability between two vertices (i,j) is a specific function of degrees ki and kj. In the framework of the configuration model of random graphs, we find analytical expressions for the degree correlation and clustering as a function of the variance of the desired degree distribution. The expressions obtained are checked by means of numerical simulations. Possible applications of our model are discussed.

  13. Emergence of rotational bands in ab initio no-core configuration interaction calculations

    E-Print Network [OSTI]

    M. A. Caprio; P. Maris; J. P. Vary; R. Smith

    2015-02-04T23:59:59.000Z

    Rotational bands have been observed to emerge in ab initio no-core configuration interaction (NCCI) calculations for p-shell nuclei, as evidenced by rotational patterns for excitation energies, electromagnetic moments, and electromagnetic transitions. We investigate the ab initio emergence of nuclear rotation in the Be isotopes, focusing on 9Be for illustration, and make use of basis extrapolation methods to obtain ab initio predictions of rotational band parameters for comparison with experiment. We find robust signatures for rotational motion, which reproduce both qualitative and quantitative features of the experimentally observed bands.

  14. The Effects of Variable Quadriceps and Hamstring Loading Configurations on Knee Joint Kinematics During In Vitro Testing

    E-Print Network [OSTI]

    Shalhoub, Sami

    2012-08-31T23:59:59.000Z

    in in vitro simulation. This study has two objectives to be examined during a deep knee squat: 1) measure the patellofemoral kinematics as a function of different loading configurations of the extensor mechanism and 2) measure the changes in tibiofemoral...

  15. The effect of hardware configuration on the performance of residential air conditioning systems at high outdoor ambient temperatures

    E-Print Network [OSTI]

    Bain, Joel Alan

    1995-01-01T23:59:59.000Z

    A study was performed which investigated the effect of hardware configuration on air conditioning cooling system performance at high outdoor temperatures. The initial phase of the investigation involved the testing of ten residential air...

  16. DTE Energy Technologies With Detroit Edison Co. and Kinectrics Inc.: Distributed Resources Aggregation Modeling and Field Configuration Testing

    SciTech Connect (OSTI)

    Not Available

    2003-10-01T23:59:59.000Z

    Summarizes the work of DTE Energy Technologies, Detroit Edison, and Kinectrics, under contract to DOE's Distribution and Interconnection R&D, to develop distributed resources aggregation modeling and field configuration testing.

  17. Measurement of rotordynamic coefficients for a high-speed flexure pivot tilting-pad bearing(load between pad) configuration

    E-Print Network [OSTI]

    Al-Ghasem, Adnan Mahmoud

    2005-08-29T23:59:59.000Z

    This thesis presents the dynamic and static forced performance of a flexure-pivot tilting-pad bearing load between pad (LBP) configuration for different rotor speeds and bearing unit loadings. The bearing has the following design parameters: 4 pads...

  18. A numerical study of steady-state vortex configurations and vortex pinning in type-II superconductors

    E-Print Network [OSTI]

    Kim, Sangbum

    2006-04-12T23:59:59.000Z

    In part I, a numerical study of the mixed states in a mesoscopic type-II superconducting cylinder is described. Steady-state configurations and transient behavior of the magnetic vortices for various values of the applied magnetic field H...

  19. A numerical study of steady-state vortex configurations and vortex pinning in type-II superconductors

    E-Print Network [OSTI]

    Kim, Sangbum

    2006-04-12T23:59:59.000Z

    In part I, a numerical study of the mixed states in a mesoscopic type-II superconducting cylinder is described. Steady-state configurations and transient behavior of the magnetic vortices for various values of the applied ...

  20. International Conference on Machine Control & Guidance 2008 1 Self-configuring, Mobile Networks in the Area of

    E-Print Network [OSTI]

    Ministry of Economic Affairs and Employment [Meyer 2007]. The basic idea of the system to be developed. Keywords GPS, agricultural engineering, self-configuring, mobile networks, ZigBee 1 INTRODUCTION Co