Powered by Deep Web Technologies
Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Adjustable Speed- A Tool for Saving Energy Losses in Pumps, Fans, Fans, Blowers and Compressors  

E-Print Network (OSTI)

Petroleum and chemical plants of today are effectively cutting energy losses in their plants thermally, electrically, and mechanically in their process equipment. In rotating process equipment such as pumps, fans, compressors, and blowers, much...

Hickok, H. N.

2

ISSUANCE: 2014-12-03 Energy Conservation Standards for Commercial and Industrial Fans and Blowers: Availability of Provisional Analysis Tools  

Energy.gov (U.S. Department of Energy (DOE))

Energy Conservation Standards for Commercial and Industrial Fans and Blowers: Availability of Provisional Analysis Tools

3

Furnace Blower Performance Improvements- Building America Top Innovation  

Energy.gov (U.S. Department of Energy (DOE))

This Top Innovation profile describes Building America research into improving efficiency of furnace fan blowers.

4

2014-12-31 Issuance: Energy Conservation Standards for Commercial and Industrial Fans and Blowers; Extension of Comment Period for Notice of Data Availability  

Energy.gov (U.S. Department of Energy (DOE))

This document is a pre-publication Federal Register extension of comment period for notice of data availability regarding energy conservation standards for commercial and industrial fans and blowers, as issued by the Deputy Assistant Secretary for Energy Efficiency on December 31, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

5

Memorandum Memorializing Ex Parte Communication, DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods.  

Energy.gov (U.S. Department of Energy (DOE))

The meeting was requested by AMCA International to introduce the association’s leadership, standards, and experience in developing fan standards to DOE; to learn more about the DOE process for...

6

Residential Furnace Blower Performance  

E-Print Network (OSTI)

, dominant in the market, with a Brushless Permanent Magnet (BPM) blower2 . Annual energy savings of the variable speed BPM motors were found to de

7

Laboratory Evaluation of Residential Furnace BlowerPerformance  

SciTech Connect

A testing program was undertaken at Lawrence Berkeley National Laboratory and an electric utility (Pacific Gas and Electric Co.) to compare the performance of furnace blowers. This laboratory testing program was undertaken to support potential changes to California Building Standards regarding in-field furnace blower energy use. This technical support includes identifying suitable performance metrics and target performance levels for use in standards. Five different combinations of blowers and residential furnaces were tested for air moving performance. Three different types of blower and motor combinations were tested in two different furnace cabinets. The blowers were standard forward--curved impellors and a prototype impeller with reverse-inclined blades. The motors were two 6-pole permanent split capacitor (PSC) single-phase induction motors, a brushless permanent magnet (BPM) motor and a prototype BPM designed for use with a prototype reverse-inclined impellor. The laboratory testing operated each blower and furnace combination over a range of air flows and pressure differences to determine air flow performance, power consumption and efficiency. Additional tests varied the clearance between the blower housing and the furnace cabinet, and the routing of air flow into the blower cabinet.

Walker, Iain S.; Lutz, Jim D.

2005-09-01T23:59:59.000Z

8

Furnace Blower Electricity: National and Regional Savings Potential  

SciTech Connect

Currently, total electricity consumption of furnaces is unregulated, tested at laboratory conditions using the DOE test procedure, and is reported in the GAMA directory as varying from 76 kWh/year to 1,953 kWh/year. Furnace blowers account for about 80percent of the total furnace electricity consumption and are primarily used to distribute warm air throughout the home during furnace operation as well as distribute cold air during air conditioning operation. Yet the furnace test procedure does not provide a means to calculate the electricity consumption during cooling operation or standby, which account for a large fraction of the total electricity consumption. Furthermore, blower electricity consumption is strongly affected by static pressure. Field data shows that static pressure in the house distribution ducts varies widely and that the static pressure used in the test procedure as well as the calculated fan power is not representative of actual field installations. Therefore, accurate determination of the blower electricity consumption is important to address electricity consumption of furnaces and air conditioners. This paper compares the potential regional and national energy savings of two-stage brushless permanent magnet (BPM) blower motors (the blower design option with the most potential savings that is currently available in the market) to single-stage permanent split capacitor (PSC) blower motors (the most common blower design option). Computer models were used to generate the heating and cooling loads for typical homes in 16 different climates which represent houses throughout the United States. The results show that the potential savings of using BPM motors vary by region and house characteristics, and are very strongly tied to improving house distribution ducts. Savings decrease dramatically with increased duct pressure. Cold climate locations will see savings even in the high static pressure duct situations, while warm climate locations will see less savings overall and negative savings in the high static pressure duct situations. Moderate climate locations will see little or no savings.

Florida Solar Energy Center; Franco, Victor; Franco, Victor; Lutz, Jim; Lekov, Alex; Gu, Lixing

2008-05-16T23:59:59.000Z

9

Furnace Blower Electricity: National and Regional Savings Potential  

NLE Websites -- All DOE Office Websites (Extended Search)

Furnace Blower Electricity: National and Regional Savings Potential Furnace Blower Electricity: National and Regional Savings Potential Title Furnace Blower Electricity: National and Regional Savings Potential Publication Type Report LBNL Report Number LBNL-417E Year of Publication 2008 Authors Franco, Victor H., James D. Lutz, Alexander B. Lekov, and Lixing Gu Document Number LBNL-417E Pagination 14 Date Published August 1 Publisher Lawrence Berkeley National Laboratory City Berkeley Abstract Currently, total electricity consumption of furnaces is unregulated, tested at laboratory conditions using the DOE test procedure, and is reported in the GAMA directory as varying from 76 kWh/year to 1,953 kWh/year. Furnace blowers account for about 80% of the total furnace electricity consumption and are primarily used to distribute warm air throughout the home during furnace operation as well as distribute cold air during air conditioning operation. Yet the furnace test procedure does not provide a means to calculate the electricity consumption during cooling operation or standby, which account for a large fraction of the total electricity consumption. Furthermore, blower electricity consumption is strongly affected by static pressure. Field data shows that static pressure in the house distribution ducts varies widely and that the static pressureused in the test procedure as well as the calculated fan power is not representative of actual field installations. Therefore, accurate determination of the blower electricity consumption is important to address electricity consumption of furnaces and air conditioners. This paper compares the potential regional and national energy savings of two-stage brushless permanent magnet (BPM) blower motors (the blower design option with the most potential savings that is currently available in the market) to single-stage permanent split capacitor (PSC) blower motors (the most common blower design option). Computer models were used to generate the heating and cooling loads for typical homes in 16 different climates which represent houses throughout the United States. The results show that the potential savings of using BPM motors vary by region and house characteristics, and are very strongly tied to improving house distribution ducts. Savings decrease dramatically with increased duct pressure. Cold climate locations will see savings even in the high static pressure duct situations, whilewarm climate locations will see less savings overall and negative savings in the high static pressure duct situations. Moderate climate locations will see little or no savings.

10

Blower Door Tests | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Blower Door Tests Blower Door Tests Blower Door Tests April 2, 2012 - 4:10pm Addthis Blower door test during a home energy audit. Credit: Holtkamp Heating & A/C, Inc. Blower door test during a home energy audit. Credit: Holtkamp Heating & A/C, Inc. What does this mean for me? You can save 5%-30% on your energy bill by making upgrades following a home energy assessment. A professional energy auditor may use a blower door to determine how airtight your home is and to help find leaks. Professional energy auditors use blower door tests to help determine a home's airtightness. Our Energy Saver 101 infographic explains the importance of a blower door test during a home energy audit. These are some reasons for establishing the proper building tightness: Reducing energy consumption due to air leakage

11

Furnace Blower Performance Improvements - Building America Top...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

in preparation for cold weather, they may be unaware of how furnace blowers can impact HVAC efficiency. In fact, studies show that the most common blowers have efficiencies of...

12

VARIABLE SPEED INTEGRATED INTELLIGENT HVAC BLOWER  

SciTech Connect

This comprehensive topical report discusses the key findings in the development of an advanced blower for HVAC applications. The benefits of rearward inclined blades over that of traditional forward inclined blades is well documented, and several prototype wheels are demonstrated in various housings. A comparison of retrofitted blowers to that of three typical units from the industry is presented. The design and modification of the blower housing is addressed and the impact of size limitations on static efficiency is discussed. The roadmap to rearward-inclined wheel technology insertion is presented and typical static efficiency gains are documented.

Herman Wiegman; Charlie Stephens; Xiaoyue Liu; Ralph Carl; Sunny Zhuang; Paul Szczesny; Kamron Wright

2003-09-23T23:59:59.000Z

13

Ex Parte discussion of commercial fan and blower rulemaking  

Energy.gov (U.S. Department of Energy (DOE))

On November 3rd, Jordan Doria, Manager of Stakeholder Engagement, Ingersoll Rand, convened a teleconference with John Cymbalsky and Daniel Cohen of DOE.

14

Building America Top Innovations 2013 Profile Â… High-Performance Furnace Blowers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Annual Fuel Utilization Annual Fuel Utilization Efficiency [AFUE] and Seasonal Energy Efficiency Ratio [SEER] and at real installed conditions. A testing program was undertaken at two laboratories to compare the performance of furnace blowers over a range of static pressure differences that included standard rating points and measured field test pressures. Three different combinations of blowers and residential furnaces were tested. The laboratory test results for blower power and airflow were combined with DOE2 models of building loads, models of air conditioner performance, standby power, and igniter, and combustion air blower power to determine potential energy and peak demand impacts. BUILDING TECHNOLOGIES OFFICE Recognizing Top Innovations in Building Science - The U.S. Department of Energy's

15

Building America Top Innovations 2013 Profile Â… High-Performance Furnace Blowers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

annual fuel utilization annual fuel utilization efficiency (AFUE) and seasonal energy efficiency ratio (SEER) and at real installed conditions. A testing program was undertaken at two laboratories to compare the performance of furnace blowers over a range of static pressure differences that included standard rating points and measured field test pressures. Three different combinations of blowers and residential furnaces were tested. The laboratory test results for blower power and airflow were combined with DOE2 models of building loads, models of air conditioner performance, standby power, and igniter and combustion air blower power to determine potential energy and peak demand impacts. BUILDING TECHNOLOGIES OFFICE Recognizing Top Innovations in Building Science - The U.S. Department of Energy's

16

Furnace Blower Electricity: National and Regional Savings Potential  

E-Print Network (OSTI)

A. , Wong-Parodi, G. 2006. BPM Motors in Residential Gasbe more than the potential savings from BPM blower motors.Overall, it appears the BPM blower motors used in two-stage

Franco, Victor; Florida Solar Energy Center

2008-01-01T23:59:59.000Z

17

Fans for Cooling | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fans for Cooling Fans for Cooling Fans for Cooling May 30, 2012 - 7:46pm Addthis Ceiling fans circulate air in a room to help keep occupants cool. | Photo courtesy of ©iStockphoto/jimkruger Ceiling fans circulate air in a room to help keep occupants cool. | Photo courtesy of ©iStockphoto/jimkruger What does this mean for me? You may be able to keep your home cool with energy-efficient and well-placed fans. Fans are less expensive to operate than air conditioners. Circulating fans include ceiling fans, table fans, floor fans, and fans mounted to poles or walls. These fans create a wind chill effect that will make you more comfortable in your home, even if it's also cooled by natural ventilation or air conditioning. Ceiling Fans Ceiling fans are considered the most effective of these types of fans,

18

Blowers for Air Assisted Diesel Particulate Filter Regeneration  

Energy.gov (U.S. Department of Energy (DOE))

Prototypes of a new series of high-pressure, brushless DC motor-drive blowers have completed field testing, and DFM and manufacturing cost studies are well advanced.

19

Furnace Blower Electricity: National and Regional Savings Potential  

E-Print Network (OSTI)

Inc. Pigg, Scott. 2003. Electricity Use by New Furnaces: Astage furnaces offer national electricity savings, but withABORATORY Furnace Blower Electricity: National and Regional

Franco, Victor; Florida Solar Energy Center

2008-01-01T23:59:59.000Z

20

Soot blower optimization; Part 1: Fundamental hydrodynamics of a soot blower nozzle and jet  

SciTech Connect

The fundamental hydrodynamics of soot blower nozzles and jets are examined. For currently available nozzles, a substantial fraction of the energy available in the steam jet is dissipated as the steam passes through a shock wave only a few jet diameters beyond the nozzle outlet. Only a small fraction of the initial energy is delivered to the heat-transfer surface for cleaning. Efforts to increase the delivered energy by raising the upstream steam pressure above the design condition produces a larger shock wave and only a small increase in delivered energy. Nozzle design should be changed to permit full expansion of the steam before it leaves the nozzle. This would eliminate the shock wave and substantially improve soot blower performance.

Jameel, M.I.; Cormack, D.E.; Tran, H. (Univ. of Toronto, Ontario (Canada). Dept. of Chemical Engineering and Applied Chemistry); Moskal, T.E. (Diamond Power Specialty Corp., Lancaster, OH (United States))

1994-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Residential Forced Air System Cabinet Leakage and Blower Performance  

E-Print Network (OSTI)

for two?speed furnaces with BPM  motors in low speed/low speed/high fire rate operation with BPM blowers and PSC and Brushless Permanent Magnet (BPM).   PSC’s are the  most 

Walker, Iain S.

2010-01-01T23:59:59.000Z

22

Furnace Blower Electricity: National and Regional Savings Potential  

E-Print Network (OSTI)

Solar Energy Center ABSTRACT Currently, total electricity consumption of furnacesFurnace Blower Electricity: National and Regional Savings Potential Victor Franco, James Lutz, Alex Lekov, and Lixing Gu (Florida Solar

Franco, Victor; Florida Solar Energy Center

2008-01-01T23:59:59.000Z

23

Mr. Ken Blower, Manager Corporate Environmental Affairs Standard...  

Office of Legacy Management (LM)

ad. 3 0 II, 0 s 3 & Mr. Ken Blower, Manager Corporate Environmental Affairs Standard Oil Company of Ohio Midland Building Cleveland, Ohio 44115 qITIALSSIG Jhitman )ATE 1 86...

24

Residential Forced Air System Cabinet Leakage and Blower Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Forced Air System Cabinet Leakage and Blower Performance Residential Forced Air System Cabinet Leakage and Blower Performance Title Residential Forced Air System Cabinet Leakage and Blower Performance Publication Type Report LBNL Report Number LBNL-3383E Year of Publication 2010 Authors Walker, Iain S., Darryl J. Dickerhoff, and William W. Delp Publisher Lawrence Berkeley National Laboratory City Berkeley Keywords air flow measurement, air leakage, blower power measurement, blowers, energy performance of buildings group, forced air systems, furnaces, indoor environment department, other, public interest energy research (pier) program, residential hvac Abstract This project evaluated the air leakage and electric power consumption of Residential HVAC components, with a particular focus on air leakage of furnace cabinets. Laboratory testing of HVAC components indicated that air leakage can be significant and highly variable from unit to unit - indicating the need for a standard test method and specifying maximum allowable air leakage in California State energy codes. To further this effort, this project provided technical assistance for the development of a national standard for Residential HVAC equipment air leakage. This standard is being developed by ASHRAE and is called "ASHRAE Standard 193P - Method of test for Determining the Air Leakage Rate of HVAC Equipment". The final part of this project evaluated techniques for measurement of furnace blower power consumption. A draft test procedure for power consumption was developed in collaboration with the Canadian General Standards Board: CSA 823 "Performance Standard for air handlers in residential space conditioning systems".

25

Blower upkeep, energy savings estimated at $20,000/yr  

SciTech Connect

Vinyl chloride gas must be removed from operating vessels in a polymerization process at Occidental Chemical, Addis, LA. If left intact, the gases can polymerize and form deposits. Considered for this function were reciprocating and liquid ring type compressors. They were rejected, however, because of anticipated high valve maintenance and energy consumption. Since high reliability and leak-free performance are essential, two double-mechanical-sealed, positive displacement blowers were installed with water injection in 1980. The blowers are designed for those special applications where gas leak tightness is required or where continuous, high-pressure or vacuum, single-stage or two-stage is needed. The lobe-type blowers were selected by Occidental because they were considered to be best suited for the low-pressure differential operation. All internal surfaces are specially cleaned to reduce contamination and may be operated with non-hydrocarbon lubricants. A back-up seal on the drive shaft provides protection against leakage of process gas to the atmosphere. Maintenance and energy savings are estimated at $20,000/yr. The blowers were used with the water injection technique because previous experience vinyl chloride monomer indicated that there were major deposits inside the compressors and ring units. The blowers have provided contaminant-free (oil-free) monomer, and the water injection has prevented the polymerization material from sticking to the surfaces of the blowers. This has ensured practically trouble-free operation, and has greatly reduced maintenance and operation downtime, significantly reducing cost.

Diehl, R.; Powers, J.

1987-05-01T23:59:59.000Z

26

Fan Dai  

NLE Websites -- All DOE Office Websites (Extended Search)

Fan Dai Fan Dai China Energy Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2002 Berkeley CA 94720 Office Location: 90-2117S (510) 486-4000 FDai@lbl.gov Fan Dai is a Ph.D. Candidate in Environmental Policy at the College of Environmental Science and Forestry, State University of New York, and a LL.M. Candidate at Berkeley School of Law, University of California. Fan's research during her stay in LBNL's China Energy Group focuses on Energy Efficiency Governance, U.S.-China Clean Energy Partnership, the Carbon Cap-and-Trade Program in California and what China can learn from California's program. Prior to LBNL, she interned at the China National Center for Climate Change Strategy and International Cooperation (NCSC), China Youth Action Climate Network (CYCAN), and China State Forestry

27

Design of high efficiency blowers for future aerosol applications  

E-Print Network (OSTI)

Blower performance measurement test-rig. ....................................................47 xii Page Figure 20 Pressure recovery for different venturi types (FLOW-DYNE Engineering... consumption curves for final-prototype. ........87 Figure 45 Experimental efficiency( )EXP values for final-prototype 70xz_28y. ............88 Figure A-1 Venturi calibration chart...

Chadha, Raman

2007-04-25T23:59:59.000Z

28

Microsoft Word - ACEEE_06_FurnaceBlower_Paper413_lbl.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

BPM Motors in Residential Gas Furnaces: What are the Savings? BPM Motors in Residential Gas Furnaces: What are the Savings? James Lutz, Victor Franco, Alex Lekov, and Gabrielle Wong-Parodi Lawrence Berkeley National Laboratory, Berkeley, California ABSTRACT Residential gas furnaces contain blowers to distribute warm air. Currently, furnace blowers use either a Permanent Split Capacitor (PSC) or a Brushless Permanent Magnet (BPM) motor. Blowers account for the majority of furnace electricity consumption. Therefore, accurate determination of the blower electricity consumption is important for understanding electricity consumption of furnaces. The electricity consumption of blower motors depends on the static pressure across the blower. This paper examines both types of blower motors in non-condensing non-weatherized

29

Laboratory Evaluation of Residential Furnace Blower Performance  

E-Print Network (OSTI)

for improvement of both electric motor and the aerodynamicthe mounting of the electric motor in the inlet restrictsconsumption of the electric motor and includes both electric

Walker, Iain S.; Lutz, Jim D.

2005-01-01T23:59:59.000Z

30

Submarine fan lobes  

SciTech Connect

Submarine fan lobes constitute major hydrocarbon reservoirs throughout the world. Therefore, a clear understanding of their geometry and facies relationships is critical for exploring and exploiting these sandstone bodies effectively. However, a multitude of submarine fan lobe terminologies (e.g., depositional lobe, suprafan lobe, fan lobe, erosional lobe, channelized lobe, ponded lobe, leveed-valley lobe, type I lobe, and type II lobe) advocating widely different meanings, has flourished in the sedimentologic literature. A critical evaluation of this problem has resulted in the following suggestions: (1) lobes are considered to be turbidite sand bodies that develop at the mouths of channels in deep-sea fan environments; (2) the term depositional lobe should be restricted to lower-fan deposits of fans that exhibit facies C and thickening-upward cycles; (3) the term suprafan lobe refers to middle-fan deposits of certain small, sand-rich, modern fans that exhibit a convex-upward depositional bulge in seismic reflection profiles; (4) the terms fan lobe, erosional lobe, channelized lobe, ponded lobe, and leveed-valley lobe do not represent true channel-mouth deposits and therefore are potentially confusing; (5) lower-fan sheet sands of large modern fans may not be equivalent to depositional lobes of ancient fans; and (6) popular fan models with lobes are not always applicable because they disregard large modern fans without lobes (e.g., Mississippi fan).

Shanmugam, G.

1989-03-01T23:59:59.000Z

31

Fan Systems | Department of Energy  

Office of Environmental Management (EM)

to save energy in fan systems. Fan Tools Tools to Assess Your Energy System Fan System Assessment Tool (FSAT) Qualified Specialists Qualified Specialists have passed a rigorous...

32

LAB 3 Cleanroom Fan and Filters Analysis for the Supports  

SciTech Connect

A 1400 lb blower fan and a 2700 lb filter box are to be supported at Lab 3. The support structure is a framework that suspends from the building wall to the cleanroom and to a washroom. The framework is made of welded 4-inch x 8-inch x 1/4-inch rectangular A36 steel tube. Welds are to be standard prequalified welds as by AISC. The main support frame is approximately 7-feet off the floor and welded onto the top of 10 columns. A deflection and stress study was performed on the planned structure. A scaled plan view is given in drawing 3823.113-MD-358764. The heaviest loaded beams were labeled with a letter designation and were studied for beam deflections and stresses. The 4-inch x 8-inch rectangular tube was also used for the substructure for the fan and filter mounts and to support a temporary floor grating during maintenance.

Cease, H.; /Fermilab

1998-05-08T23:59:59.000Z

33

Fan System Assessment Tool  

Energy.gov (U.S. Department of Energy (DOE))

The Fan System Assessment Tool (FSAT) is a free online software tool that helps industrial users quantify energy use and savings opportunities in industrial fan systems. Use FSAT to understand how well your fan systems are operating, determine the economic benefit of system modifications, and establish which options are most economically viable when multiple opportunities exist for system modification.

34

VBH-0036 - In the Matter of Whistle Blower Hearing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VBH-0036 - In the Matter of Whistle Blower Hearing VBH-0036 - In the Matter of Whistle Blower Hearing VBH-0036 - In the Matter of Whistle Blower Hearing XXXXXXX (the complainant) filed a complaint against his employer, Fluor Daniel, Inc. (FDI), and two other DOE contractors, Duke Engineering & Services (DE&S) and TRW Environmental Safety Systems (TRW), pursuant to the DOE's Contractor Employee Protection Program, 10 C.F.R. Part 708. In that complaint, the complainant alleges that he suffered reprisals because he had made a disclosure that is protected by Part 708. vbh0036n.pdf More Documents & Publications VWZ-0009 - In the Matter of Lockheed Martin Energy Systems, Inc. VBU-0039 - In the Matter of Edward J. Seawalt VBH-0036 - In the Matter of Whistle Blower Hearing

35

The Impact of Forced Air System Blowers on Furnace Performance and Utility  

NLE Websites -- All DOE Office Websites (Extended Search)

The Impact of Forced Air System Blowers on Furnace Performance and Utility The Impact of Forced Air System Blowers on Furnace Performance and Utility Loads Speaker(s): Bert Phillips Date: November 7, 2003 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: James Lutz Bert Phillips will talk about the impact of forced air system blower performance on furnace or heating performance and on utility loads, and what can be done to reduce blower power requirements. He will also briefly discuss a ground source heat pump monitoring study that he just finished. Mr. Phillips is a registered Professional Engineer in three Canadian provinces and part owner of UNIES Ltd., an engineering firm in Winnipeg, Manitoba (60 miles straight north of the North Dakota/Minnesota border). He does research and HVAC system design and investigates

36

Evaluation of the cooling fan efficiency index.  

E-Print Network (OSTI)

for Figure 3. Fan power versus cooling fan the computer fanparameters (cooling effect, fan power and CFE) involved inthat the typical power consumption of cooling fans is lower

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

37

Fan Energy Savings Decisions  

E-Print Network (OSTI)

Axial fans are used for thousands of industrial applications consuming millions of kilowatts daily. The decision that saves dollars is to either automatically change fan speed or change blade pitch to save up to 50 percent of consumed power over a...

Monroe, R. C.

38

Ceiling Fan | Open Energy Information  

Open Energy Info (EERE)

TODO: Add description List of Ceiling Fan Incentives Retrieved from "http:en.openei.orgwindex.php?titleCeilingFan&oldid267151" Category: Articles with outstanding TODO tasks...

39

Introduction of a Cooling Fan Efficiency Index  

E-Print Network (OSTI)

Cooling Effect, Fan Power, and Cooling-Fan Efficiency Index?t eq ) °C °F Fan Power, W (P f ) Cooling-Fan Efficiency (The measured cooling effect and fan power and the determined

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

40

Delgada Fan, Pacific Ocean  

Science Journals Connector (OSTI)

The Delgada Fan, an irregularly shaped turbidite deposit extending more than 350 km offshore from northern California, consists of two large leveed-valley units each fed by a separate complex of coalescing sub...

William R. Normark; Christina E. Gutmacher

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Training: Fan Systems | Department of Energy  

Office of Environmental Management (EM)

in your plant. Fan System Assessment - 1-day workshop Availability: Onsite instructor-led and online Optimizing industrial fan systems can take on many forms, but any fan...

42

Noise from Centrifugal Fans  

Science Journals Connector (OSTI)

The sound power radiated from the discharge of centrifugal fans of diameters between 3 and 6 1 2 ? inches has been measured as a function of fan dimensions and operating conditions. The measurements were made by arranging the fan under test to discharge into an 11 foot nonreflecting tube in which the static pressure could be controlled. Air was exhausted from the tube through a side port of high acoustic impedance located part way down the tube. The detectingmicrophone which is located in the tube between the exit port and the acoustic termination is out of the air stream and therefore not subject to wind noise. The total discharge noise power P in watts in the range 75 to 10 000 cps was found empirically to be given by P?=?0.90?×?10 ?4 (D/W)?H 3 ?+?5.2?×?10 ?10 (Q 5 /W 4 D 8 ) where D and W are the fan diameter and width respectively in inches H is the static pressure in inches of water and Q is the air flow in cubic feet per minute. The angular frequency of the fan wheel does not appear explicitly since this quantity is uniquely specified by H Q D and W. Spectral analysis indicates that the power is concentrated primarily at low frequencies. Application of the results of this study to design problems will be discussed.

R. B. Goldman; G. C. Maling

1955-01-01T23:59:59.000Z

43

Record of Communication Concerning Ceiling Fan and Ceiling Fan...  

Energy Savers (EERE)

of communications made to DOE staff on the subject of possible changes to standards and test procedures for ceiling fans and ceiling fan light kits. Memo on August 20 ALA DOE...

44

Fan System Assessment Tool Introduction  

Energy.gov (U.S. Department of Energy (DOE))

This presentation provides an introduction to the Fan System Assessment Tool (FSAT). With FSAT, users can calculate the amount of energy used by their fan system; determine system efficiency; and quantify the savings potential of an upgraded system.

45

Comparison of modern Mississippi fan with selected ancient fans  

SciTech Connect

A comparison of the modern passive-margin Mississippi fan (DSDP Leg 96) with selected ancient active-margin fans reveals major differences in turbidite facies associations and seismic characteristics of the lower fan area. The lower Mississippi fan is composed of channel (facies B and F) and nonchannel sequences (facies C. and D), whereas lower fan areas of ancient active-margin fans are characterized by nonchannelized, thickening-upward depositional lobes (facies C and D) with sheetlike geometry. An absence of depositional lobes in the lower Mississippi fan is also suggested by a lack of mounded seismic reflections. Continuous and parallel seismic reflections of the lower Mississippi fan may represent sheet sands, but not those of true depositional lobes. In mature passive-margin fans, long, sinuous channels develop as a consequence of low gradients and the transport of sediment with a relatively low sand/mud ratio, and these channels develop lenticular sand bodies. In contrast, channels in active-margin fans are short and commonly braided as a result of high gradients and the transport of sediment with a relatively high sand/mud ratio. Braided channels characteristically develop sheetlike sand bodies.

Shanmugam, G.; Moiola, R.J.; McPherson, J.G.; O'Connell, S.

1988-09-01T23:59:59.000Z

46

Use of low temperature blowers for recirculation of hot gases  

DOE Patents (OSTI)

An apparatus is described for maintaining motors at low operating temperatures during recirculation of hot gases in fuel cell operations and chemical processes such as fluidized bed coal gasification. The apparatus includes a means for separating the hot process gas from the motor using a secondary lower temperature gas, thereby minimizing the temperature increase of the motor and associated accessories.

Maru, H.C.; Forooque, M.

1982-08-19T23:59:59.000Z

47

Introduction of a Cooling Fan Efficiency Index  

E-Print Network (OSTI)

F Fan Power, W (P f ) Cooling-Fan Efficiency (CFE) °C/W °F/WSun et al. 2007). Thus, the CFE is defined by Equation 1.?t eq CFE = Cooling effect = ( – 1 ) --------- P f Fan power

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

48

Evaluation of the cooling fan efficiency index.  

E-Print Network (OSTI)

named Cooling Fan Efficiency (CFE) that is the ratio betweenthe Cooling Fan Efficiency (CFE) is defined by Equation 1. ?t CFE ? ( ? 1 ) eq P f where P f is fan power, i.e the input

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

49

THE WORLD'S Biggest Fan Collection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WORLD'S Biggest Fan Collection WORLD'S Biggest Fan Collection If you only know the Big Ass Fan Company as the preeminent designer and manufacturer of high volume, low speed fans for factories and cows, it's time you get to know us better. While we continue to lead the way in industrial and agricultural air movement, we've also refined these designs to bring the same innovation and benefits of our famous fans to circulate an ocean of air in sound-sensitive commercial spaces and homes. And when our customers said they wanted something for smaller spaces, we listened - and we think you'll like the results. We've got you covered - ceiling to floor, wall to door! Features ï‚ž New patented airfoil system uses 10 Powerfoil airfoils, winglets and patent-pending AirFence(tm) technology to increase

50

Noise and vibration characteristics of cleanroom fan filter units  

Science Journals Connector (OSTI)

Fan filter units (FFU’s) are used increasingly by the microelectronics industry to provide recirculation air in cleanrooms. Such units usually consist of one or more direct?drive blowers located in a small discharge plenum and a HEPA or ULPA filter. There may be several hundred FFU’s in a large cleanroom. The noise and vibration generated by FFU’s differ greatly between manufacturers. Since it is difficult to apply external noise and vibration mitigation it is important to select an FFU model with appropriate noise and vibration levels so that a cleanroom served by these units will meet the prespecified noise and vibration criteria. Unfortunately FFU manufacturers usually do not provide enough information for predicting the FFU generated sound?pressure spectrum or vibration in a cleanroom. In this paper simple noise and vibration measurement methods will be described which can be used as a basis for specifying FFU performance without special testing facilities. Measured data will be presented for a number of units. Procedures will be demonstrated to predict the performance of a cleanroom which uses FFU’s as the primary source of recirculation air.

Mei Q. Wu; Colin G. Gordon

1998-01-01T23:59:59.000Z

51

Mass and fans in attached sunspaces  

SciTech Connect

The effect of thermal storage mass on the performance of an attached sunspace is investigated for a particular design in Boston. Mass in the sunspace and in the adjoining building are compared. Performance is evaluated in terms of temperature conditions in the sunspace and delivery of useful solar heat to the adjoining building. The dependence of the results on the manner of heat delivery is studied. Both natural convection and fan-forced air flow are included.

Jones, R.W.; McFarland, R.D.; Lazarus, G.S.

1982-01-01T23:59:59.000Z

52

Save Energy with Axial Fans  

E-Print Network (OSTI)

= Trdh = CFM AAPP. A APPROACH V A~PROACH VAPP. < .5VFAN APPROACH VELOCITY FIG .? A 14 ft. fan, whose design flow as ,J,OOO CFr?1 in a ring 5 feet from grade would have an Area Approach of 220 ft 2 and a'V approach of 1137 FPM. The velocity... through the fan itself would be rOlfjhly: 250,000 or 1624 FPM .785 (14)2 As a rule of thumb, the approach velocity should not exceed 50% of the velocity through the fan. The high approach would cause additional velocity pres sure losses that were...

Monroe, R. C.

1981-01-01T23:59:59.000Z

53

Best Practice for Energy Efficient Cleanrooms: Fan-FilterUnits  

SciTech Connect

The HVAC systems in cleanrooms may use 50 percent or more of the total cleanroom energy use. Fan energy use accounts for a significant portion (e.g., over 50%) of the HVAC energy use in cleanrooms such as ISO Classes 3, 4, or 5. Three types of air-handling systems for recirculating airflows are commonly used in cleanrooms: (1) fan-tower systems with pressurized plenum, (2) ducted HEPA systems with distributed-fans, and (3) systems with fan-filter units. Because energy efficiency of the recirculation systems could vary significantly from system type to system type, optimizing aerodynamic performance in air recirculation systems appears to be a useful approach to improve energy efficiency in cleanrooms. Providing optimal airflows through careful planning, design and operation, including air change rate, airflow uniformity, and airflow speed, is important for controlling particle contamination in cleanrooms. In practice, the use of fan-filter units (FFUs) in the air-handling system is becoming more and more popular because of this type of system may offer a number of advantages. Often modular and portable than traditional recirculation airflow systems, FFUs are easier to install, and can be easily controlled and monitored to maintain filtration performance. Energy efficiency of air handling systems using fan-filter units can, however, be lower than their counterparts and may vary significantly from system to system because of the difference in energy performance, airflow paths, and the operating conditions of FFUs.

Xu, Tengfang

2005-06-15T23:59:59.000Z

54

Fan System Assessment Tool Fact Sheet | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fact Sheet Fan System Assessment Tool Fact Sheet Fact sheet describing how industrial plants can improve their fan system performance using AMO's Fan System Assessment Tool (FSAT)....

55

Dating Fan Deposits with Cosmogenic Nuclides  

Science Journals Connector (OSTI)

Boulders are preferable to smaller clasts in that ... time since deposition on the fan. Large boulders are produced through rapid large-scale mass ... to the fan in debris flows or other flood events. Although in...

Susan Ivy-Ochs; Miriam Dühnforth…

2013-01-01T23:59:59.000Z

56

A COMPUTATIONAL AND EXPERIMENTAL ANALYSIS OF A DUCTED FAN USED IN VTOL UAV SYSTEMS  

E-Print Network (OSTI)

conditions. Fan rotor field including secondary flows, tip vortices, blade boundary layers and the wake sys wind tunnel test data. Total pressure measurements and computational predictions of mean flow field shows a significant level of 3D hub separation affecting the overall performance of the ducted fan

Camci, Cengiz

57

Xudong Fan Curriculum Vitae Curriculum Vitae  

E-Print Network (OSTI)

Xudong Fan Curriculum Vitae 1 Curriculum Vitae (Last updated: October 28, 2009) Xudong (Sherman Research Assistant and Teaching Assistant, #12;Xudong Fan Curriculum Vitae 2 Physics Department and Oregon in Opto-fluidic Ring Resonators for #12;Xudong Fan Curriculum Vitae 3 Ultrasensitive Biomolecule Detection

Fan, Xudong "Sherman"

58

Experimental Evaluation of Installed Cooking Exhaust Fan Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Experimental Evaluation of Installed Cooking Exhaust Fan Performance Experimental Evaluation of Installed Cooking Exhaust Fan Performance Title Experimental Evaluation of Installed Cooking Exhaust Fan Performance Publication Type Report LBNL Report Number LBNL-4183E Year of Publication 2010 Authors Singer, Brett C., William W. Delp, and Michael G. Apte Publisher Lawrence Berkeley National Laboratory City Berkeley Keywords airflow & pollutant transport group, cooktop, energy analysis and environmental impacts department, gas burners, indoor air quality, indoor environment department, kitchen, nitrogen dioxide, oven, pollutant emissions, range hood, residential, source control, task ventilation, technology, sustainability and impact assessment group Abstract The installed performance of cooking exhaust fans was evaluated through residential field experiments conducted on a sample of 15 devices varying in design and other characteristics. The sample included two rear downdraft systems, two under-cabinet microwave over range (MOR) units, three different installations of an under-cabinet model with grease screens across the bottom and no capture hood, two devices with grease screens covering the bottom of a large capture hood (one under-cabinet, one wall-mount chimney), four under-cabinet open hoods, and two open hoods with chimney mounts over islands. Performance assessment included measurement of airflow and sound levels across fan settings and experiments to quantify the contemporaneous capture efficiency for the exhaust generated by natural gas cooking burners. Capture efficiency is defined as the fraction of generated pollutants that are removed through the exhaust and thus not available for inhalation of household occupants. Capture efficiency (CE) was assessed for various configurations of burner use (e.g. single front, single back, combination of one front and one back, oven) and fan speed setting. Measured airflow rates were substantially lower than the levels noted in product literature for many of the units. This shortfall was observed for several units costing in excess of $1000. Capture efficiency varied widely (from <5% to roughly 100%) across devices and across conditions for some devices. As expected, higher capture efficiencies were achieved with higher fan settings and the associated higher air flow rates. In most cases, capture efficiencies were substantially higher for rear burners than for front burners. The best and most consistent performance was observed for open hoods that covered all cooktop burners and operated at higher airflow rates. The lowest capture efficiencies were measured when a front burner was used with a rear backdraft system or with lowest fan setting for above the range systems that do not cover the front burners.

59

Fan deltas and braid deltas: conceptual problems  

SciTech Connect

The concept of fan deltas has been widely misinterpreted in the geologic literature. A true fan delta is defined as an alluvial fan deposited into a standing body of water. Such sequences are of limited areal extent and are, as expected, uncommon in the rock record. By contrast, braid deltas (herein defined), formed by progradation of a braided fluvial system into a standing body of water, are a common geomorphic feature in many modern settings, and their deposits are common in the geologic record. Braid-delta sequences are often identified as fan deltas, on the false premise that coarse-grained deposits in a deltaic setting are always part of an alluvial fan complex. The authors find that most published examples of so called fan deltas contain no direct evidence for the presence of an alluvial fan. Even in examples where an alluvial fan could be documented, the authors found that, in many cases, the alluvial fan complex was far removed from the shoreline, separated by an extensive braid plain. The authors suggest that such systems are better classified as braid deltas. They consider that it is essential to distinguish the environmental setting of true fan deltas from that of braid deltas. Misclassification will lead to incorrect interpretations of expected facies, sandstone geometry, reservoir quality, and tectonic settings. Criteria based on geometry, vertical and lateral lithofacies associations, and paleocurrent patterns should be used to correctly identify and distinguish these depositional systems.

McPherson, J.G.; Shanmugam, G.; Moiola, R.J.

1986-05-01T23:59:59.000Z

60

Improving the efficiency of centrifugal fans  

E-Print Network (OSTI)

was made of the design ch;. r- acteristics of this type of fan. In this study, several modifications to existing fans were evaluated. One modification wa concerned with the substitution of airfoil shaped blades f' or the original ones. Another medi... IV DISCUSSION OF RESULTS 0 ~ 1 Evaluation of Unmodified Fan Design 0. 2 11odification of the Cutoff Piece 4. 3 Re-evaluation of the Partial Admission Plate 4 . 4 Inlet Modification 4 . 5 Blade Shape Modifications 4. 6 Final Combined...

Wolfe, Clifford Kent

1976-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Healthcare Energy: Spotlight on Fans and Pumps  

Energy.gov (U.S. Department of Energy (DOE))

The Building Technologies Office conducted a healthcare energy end-use monitoring project for two sites. Read details about the fan and pump energy results.

62

STATE OF CALIFORNIA FAN POWER CONSUMPTION  

E-Print Network (OSTI)

STATE OF CALIFORNIA FAN POWER CONSUMPTION CEC-MECH-4C (Revised 08/09) CALIFORNIA ENERGY COMMISSION FAN POWER CONSUMPTION MECH-4C PROJECT NAME: DATE: NOTE: Provide one copy of this worksheet for each Systems or Variable Air Volume (VAV) Systems when using the Prescriptive Approach. See Power Consumption

63

Development of a High Efficiency Ceiling Fan  

E-Print Network (OSTI)

The potential of ceiling fans to improve comfort during the cooling season is well documented (Rohles et al.. 1983; Fairey et al.. 1986). There are at least two cases: In the first where air conditioning is unavailable, adding ceiling fans may...

Parker, D. S.; Callahan, M. P.; Sonne, J. K.; Su, G. H.; Hibbs, B. D.

2000-01-01T23:59:59.000Z

64

Supply fan energy use in pressurized underfloor air distribution systems  

E-Print Network (OSTI)

air-water devices like fan coil units and water source heatsuch as VAV boxes and fan coil units. One fairly typical

Webster, Tom P.E.; Bauman, Fred P.E.; Ring, Erik P.E.

2000-01-01T23:59:59.000Z

65

Shanghai Fan Qie Trading Ltd | Open Energy Information  

Open Energy Info (EERE)

Shanghai Fan Qie Trading Ltd Place: Shanghai Municipality, China Sector: Solar Product: Solar panel wholesaler and system integrator. References: Shanghai Fan Qie Trading Ltd1...

66

Fan-fold shielded electrical leads  

DOE Patents (OSTI)

Disclosed are fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate. 3 figs.

Rohatgi, R.R.; Cowan, T.E.

1996-06-11T23:59:59.000Z

67

Fan System Assessment - End User Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fan System Assessment - End User Training Fan System Assessment - End User Training Fan System Assessment - End User Training December 18, 2013 7:30AM to 4:30PM EST Boise, Idaho Optimizing industrial fan systems can take on many forms, but any fan optimization project must meet the needs of the process. This self-paced workshop highlights the benefits of fan system optimization and examines fan system performance characteristics and practical issues concerning measurement data. The session introduces the FSAT software. This powerful analysis software helps you quantify the potential benefits of configuring fan systems for optimal performance, calculate the amount of energy use by your fan system, and estimate fan system efficiency. Learn how the software works, what data is required for FSAT, and how to interpret assessment

68

Cooling with a Whole House Fan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cooling with a Whole House Fan Cooling with a Whole House Fan Cooling with a Whole House Fan May 30, 2012 - 6:54pm Addthis Whole house fan installed as part of a home retrofit project in California. | Photo courtesy of Lieko Earle, NREL. Whole house fan installed as part of a home retrofit project in California. | Photo courtesy of Lieko Earle, NREL. What does this mean for me? A whole-house fan may be sufficient to cool your house, at least for part of the year. In many climates, a whole-house fan can save you money and maintain comfort during the cooling season. How does it work? A whole-house fan works by pulling air in through windows and exhausting it through the attic and roof. Whole house cooling using a whole house fan can substitute for an air conditioner most of the year in most climates. Whole house fans combined

69

Synchronous and Cogged Fan Belt Performance Assessment  

SciTech Connect

The GSA Regional GPG Team commissioned the National Renewable Energy Laboratory (NREL) to perform monitoring of cogged V-belts and synchronous belts on both a constant volume and a variable air volume fan at the Byron G. Rodgers Federal Building and U.S. Courthouse in Denver, Colorado. These motor/fan combinations were tested with their original, standard V-belts (appropriately tensioned by an operation and maintenance professional) to obtain a baseline for standard operation. They were then switched to the cogged V-belts, and finally to synchronous belts. The power consumption by the motor was normalized for both fan speed and air density changes. This was necessary to ensure that the power readings were not influenced by a change in rotational fan speed or by the power required to push denser air. Finally, energy savings and operation and maintenance savings were compiled into an economic life-cycle cost analysis of the different belt options.

Cutler, D.; Dean, J.; Acosta, J.

2014-02-01T23:59:59.000Z

70

AIAA 971828 American Institute of Aeronautics and Astronautics  

E-Print Network (OSTI)

incompressible fluid flows. A list of such devices would include, among others, pumps, hydraulic turbines, propellers, low­speed fans and blowers, and low­ speed experimental test rigs. Despite this abundance

Turkel, Eli

71

Expert assessments of the cost of light water small modular reactors  

Science Journals Connector (OSTI)

...computers, monitoring equipment, instrumentation equipment 8) HVAC and fire fighting equipmentVentilation and air conditioning...buildings that are not in controlled areas Both of the above include filters, heaters, coolers, fans, blowers, humidifiers, ducts...

Ahmed Abdulla; Inês Lima Azevedo; M. Granger Morgan

2013-01-01T23:59:59.000Z

72

Performance Assessment of Photovoltaic Attic Ventilator Fans  

Energy.gov (U.S. Department of Energy (DOE))

A case study of photovoltaic attic ventilator fans was conducted on an occupied single family home in Central Florida. Two fans were installed at mid-summer in an instrumented home where attic air temperature, meteorological conditions and space cooling electric power were measured. The home already had an attic radiant barrier, but still experienced attic air temperatures in excess of 130oF.

73

Evaluation of Retrofit Variable-Speed Furnace Fan Motors  

SciTech Connect

In conjunction with the New York State Energy Research and Development Authority (NYSERDA) and Proctor Engineering Group, Ltd. (PEG), the Consortium for Advanced Residential Buildings (CARB) has evaluated the Concept 3 (tm) replacement motors for residential furnaces. These brushless, permanent magnet (BPM) motors can use much less electricity than their PSC (permanent split capacitor) predecessors. This evaluation focuses on existing homes in the heating-dominated climate of upstate New York with the goals of characterizing field performance and cost-effectiveness. The results of this study are intended to be useful to home performance contractors, HVAC contractors, and home efficiency program stakeholders. The project includes eight homes in and near Syracuse, NY. Tests and monitoring was performed both before and after fan motors were replaced. Average fan power reductions were approximately 126 Watts during heating and 220 Watts during cooling operation. Over the course of entire heating and cooling seasons, these translated into average electric energy savings of 163 kWh. Average cost savings were $20 per year. Homes where the fan was used outside of heating and cooling mode saved an additional $42 per year on average. Results indicate that BPM replacement motors will be most cost-effective in HVAC systems with longer run times and relatively low duct static pressures. More dramatic savings are possible if occupants use the fan-only setting when there is no thermal load. There are millions of cold-climate, U.S. homes that meet these criteria, but the savings in most homes tested in this study were modest.

Aldrich, R.; Williamson, J.

2014-01-01T23:59:59.000Z

74

E-Print Network 3.0 - alluvial fan deposits Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

FANS: THE VENEZUELA DEBRIS FLOW AND FLASH FLOOD DISASTER Summary: and flood hazard sediment deposition in an alluvial fan on alluvial fans extremely dangerous. channel... ) in...

75

DOE Publishes Final Rule for Residential Furnace Fan Test Procedure...  

Office of Environmental Management (EM)

DOE Publishes Final Rule for Residential Furnace Fan Test Procedure DOE Publishes Final Rule for Residential Furnace Fan Test Procedure January 3, 2014 - 12:00am Addthis The...

76

Development of Power-head based Fan Airflow Station  

E-Print Network (OSTI)

Development of Power-head Based Fan Airflow Station Gang Wang Research associate University of Nebraska, Lincoln Mingsheng Liu Professor University of Nebraska, Lincoln Abstract Fan airflow measurement is critical for heating... under partial loads. On the other hand, in most of airflow range, the power curve varies exquisitely. Wang and Liu developed the VFD airflow station to obtain the fan airflow using the power and speed based on the power curve. Both the fan...

Wang, G.; Liu, M.

2005-01-01T23:59:59.000Z

77

Cooling Tower Energy Conservation Through Hydraulic Fan Drives  

E-Print Network (OSTI)

Fan Drive Eliminates These Problems from the Drive Train. The electric motor is at ground level; close coupled to a hydraulic pump, filters and oil reservoir. Hydraulic lines bring oil flow to the lightweight hydraulic motor mounted at the fan... Tower Fan Drives Are Many: It removes the hazard of costly fan wrecks and shaft coupling breakage. It eliminates gearbox maintenance, breakdown or replacement. The electric motor is mounted with the reservoir and pump at ground level for ease...

Dickerson, J.

78

DOE Publishes Final Rule for Residential Furnace Fan Test Procedure  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Energy (DOE) has published a final rule regarding test procedures for residential furnace fans.

79

2005 Pearson Education South Asia Pte Ltd Applied Fluid Mechanics  

E-Print Network (OSTI)

, and compressors. · Describe propeller fans, duct fans, and centrifugal fans. · Describe blowers and compressors Education South Asia Pte Ltd Applied Fluid Mechanics 17.Drag and Lift 18.Fans, Blowers, Compressors and the Flow of Gases 19.Flow of Air in Ducts 18. Fan, Blowers, Compressors and the Flow of Gases ©2005 Pearson

Leu, Tzong-Shyng "Jeremy"

80

List of Whole House Fans Incentives | Open Energy Information  

Open Energy Info (EERE)

Whole House Fans Incentives Whole House Fans Incentives Jump to: navigation, search The following contains the list of 26 Whole House Fans Incentives. CSV (rows 1 - 26) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active Alliant Energy Interstate Power and Light (Gas and Electric) - Farm Equipment Energy Efficiency Incentives (Iowa) Utility Rebate Program Iowa Agricultural Agricultural Equipment Ceiling Fan Clothes Washers Custom/Others pending approval Dishwasher Doors Heat recovery Lighting Motor VFDs Motors Refrigerators Water Heaters Windows Whole House Fans Room Air Conditioners Ground Source Heat Pumps Yes Alliant Energy Interstate Power and Light - Farm Equipment Energy Efficiency Incentives (Minnesota) Utility Rebate Program Minnesota Agricultural Agricultural Equipment

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

List of Ceiling Fan Incentives | Open Energy Information  

Open Energy Info (EERE)

Fan Incentives Fan Incentives Jump to: navigation, search The following contains the list of 99 Ceiling Fan Incentives. CSV (rows 1 - 99) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active AEP Ohio (Electric) - Residential Energy Efficiency Rebate Program (Ohio) Utility Rebate Program Ohio Residential Building Insulation Ceiling Fan Central Air conditioners Custom/Others pending approval Duct/Air sealing Heat pumps Lighting Motors Programmable Thermostats Windows Yes AEP Ohio (Gas) - Residential Energy Efficiency Rebate Program (Ohio) Utility Rebate Program Ohio Residential Building Insulation Ceiling Fan Central Air conditioners Custom/Others pending approval Dehumidifiers Duct/Air sealing Heat pumps Lighting Motors Programmable Thermostats

82

Demonstration of Intelligent Control and Fan Improvements in Computer Room  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Intelligent Control and Fan Improvements in Computer Room Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers Title Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers Publication Type Report Refereed Designation Unknown LBNL Report Number LBNL-6007E Year of Publication 2012 Authors Coles, Henry C., Steve E. Greenberg, and Corrine Vita Document Number LBNL-6007E Date Published 12/2012 Publisher Lawrence Berkeley National Laboratory City Berkeley, CA Keywords air distribution, building technology and urban systems department, computer room air handler, crah control, data center, data center crah, ec fan, ecm, ecm fan, fan speed control, high tech and industrial systems group, plug fan, variable frequency drive, vfd, wireless control Abstract

83

Morphology and seismic stratigraphy of the Toyama deep sea fan  

E-Print Network (OSTI)

. C. Hilde The Toyama Deep Sea Fan, a contemporary depositional feature located in the Japan Sea, is a canyon-fed elongate fan system with pronounced lobes in both the Yamato and Japan Basins. The Toyama Fan is the eighth largest modern fan system... with a surface area greater than 108, 000 square kilometers. Deposits of this Quaternary turbidite system range in thickness from less than 150 m to more than 750 m. The meandering Toyama Deep Sea Channel extends northward from the central coast...

Shepherd, David Barton

2012-06-07T23:59:59.000Z

84

DOE Publishes Request for Information for Ceiling Fans | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fans Energy Conservation Standards DOE Publishes Final Rule for the Request for Exclusion of 100 Watt R20 Short Incandescent Reflector Lamps from Energy Conservation Standards...

85

Appearance Learning by Adaptive Kalman Filters for FLIR Tracking Vijay Venkataraman, Guoliang Fan, Xin Fan  

E-Print Network (OSTI)

Appearance Learning by Adaptive Kalman Filters for FLIR Tracking Vijay Venkataraman, Guoliang Fan the challenging issue of target tracking and appearance learning in Forward Looking In- frared (FLIR) sequences existing methods and experiments on the AMCOM FLIR dataset validate its effectiveness. 1. Introduction

Fan, Guoliang

86

Target Tracking with Online Feature Selection in FLIR Imagery Vijay Venkataraman, Guoliang Fan and Xin Fan  

E-Print Network (OSTI)

Target Tracking with Online Feature Selection in FLIR Imagery Vijay Venkataraman, Guoliang Fan tracking algo- rithm for FLIR imagery. A dual foreground and background model is proposed for target that the proposed algorithm can accurately track poorly-visible targets in FLIR imagery even with strong ego

Fan, Guoliang

87

Modeling of ECM Controlled Series Fan-powered VAV Terminal Units  

E-Print Network (OSTI)

Semi-empirical models for series fan-powered variable air volume terminal units (FPTUs) were developed based on models of the primary, plenum, fan airflow and the fan power consumption. The experimental setups and test procedures were developed...

Yin, Peng

2011-10-21T23:59:59.000Z

88

Choosing the right boiler air fans at Weston 4  

SciTech Connect

When it came to choosing the three 'big' boiler air fans - forced draft, induced draft and primary air, the decision revolved around efficiency. The decision making process for fan selection for the Western 4 supercritical coal-fired plant is described in this article. 3 photos.

Spring, N.

2009-04-15T23:59:59.000Z

89

Submarine-fan sedimentation, Ouachita Mountains, Arkansas and Oklahoma  

SciTech Connect

More than 10,000 m (32,808 ft) of interbedded sandstones and shales comprise the Upper Mississippian and Lower Pennsylvanian flysch succession (Stanley, Jackfork, Johns Valley, Atoka) in the Ouachita Mountains of Arkansas and Oklahoma. Deposited primarily by turbidity current and hemipelagic processes in bathyal and abyssal water depths, these strata formed major submarine-fan complexes that prograded in a westward direction along the axis of an elongate remnant ocean basin that was associated with the collision and suturing of the North American and African-South American plates. A longitudinal fan system is visualized as the depositional framework for these strata, which were deposited in a setting analogous to the modern Bengal fan of the Indian Ocean. Facies analysis of the Jackfork formation indicates that inner fan deposits are present in the vicinity of Little Rock, Arkansas; middle fan channel and interchannel deposits occur at DeGray Dam and Friendship, Arkansas; and outer fan depositional-lobe deposits are present in southeastern Oklahoma. Boulder-bearing units (olistostromes), many with exotic clasts, were shed laterally into the Ouachita basin. They occur throughout the flysch succession and in all fan environments (i.e., inner, middle, and outer). This relationship may serve as a useful criterion for recognizing analogous longitudinal fan systems in the rock record.

Moiola, R.J.; Shanmugam, G.

1984-09-01T23:59:59.000Z

90

Improving Fan System Performance: A Sourcebook for Industry  

Energy.gov (U.S. Department of Energy (DOE))

This sourcebook is designed to provide fan system users with a reference outlining opportunities to improve system performance. It is not intended to be a comprehensive technical text on improving fan systems, but rather a document that makes users aware of potential performance improvements, provides some practical guidelines, and details where the user can find more help.

91

E-Print Network 3.0 - alluvial fan nye Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Abstract. Alluvial fans of alpine torrents are both natural deposition areas for sediment discharged... on alluvial fans depends on proper iden- tification of ... Source:...

92

Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers  

E-Print Network (OSTI)

ECM motor, plug fan, variable frequency drive i ii TABLE OFcontrol system and variable frequency drives can be added toby adding variable frequency drives (VFDs) to fans with

Coles, Henry

2014-01-01T23:59:59.000Z

93

Submitting Organization Hongyou Fan Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

 2007 R&D 100 Award Entry Form  Submitting Organization Hongyou Fan Sandia National Laboratories Advanced Materials Laboratory 1001 University Boulevard SE Albuquerque, NM 87106, USA 505-272-7128 (phone) 505-272-7336 (fax) hfan@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate represen- tation of this product. Submitter's signature_______________________________ Earl Stromberg Lockheed Martin Aeronautics Mail Zone 2893 PO Box 748 Fort Worth, TX 76101, USA 817-763-7376 (phone) 817-762-6911 (fax) Earl.W.Stromberg@lmco.com Self-Assembling Process for Fabricating Tailored Thin Films This simple, economical nanotechnology coating process enables the development of nanoparticle thin films

94

High Efficiency Fans and High Efficiency Electrical Motors  

E-Print Network (OSTI)

Replacing nominal efficient electrical motors with premium efficiency can save on electrical power costs in cotton gins. Connected horsepower load on industrial air fans is approximately 60% of the total horsepower in a typical cotton gin...

Breedlove, C. W.

95

New Energy Efficiency Standards for Furnace Fans to Reduce Carbon...  

Office of Environmental Management (EM)

by at least 3 billion metric tons in total by 2030, equal to more than a year's carbon pollution from the entire U.S. electricity system. Furnace fans are used to circulate air...

96

Property:Building/SPElectrtyUsePercCirculationFans | Open Energy  

Open Energy Info (EERE)

SPElectrtyUsePercCirculationFans SPElectrtyUsePercCirculationFans Jump to: navigation, search This is a property of type String. Circulation fans Pages using the property "Building/SPElectrtyUsePercCirculationFans" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 18.6715328229 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 3.84924044288 + Sweden Building 05K0004 + 13.5679722118 + Sweden Building 05K0005 + 10.115947775 + Sweden Building 05K0006 + 10.4348038368 + Sweden Building 05K0007 + 3.09034005771 + Sweden Building 05K0008 + 1.5024342653 + Sweden Building 05K0009 + 13.4365662073 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 2.75323793817 + Sweden Building 05K0012 + 15.8993705073 + Sweden Building 05K0013 + 1.11354848212 +

97

Property:Building/SPElectrtyUsePercFans | Open Energy Information  

Open Energy Info (EERE)

SPElectrtyUsePercFans SPElectrtyUsePercFans Jump to: navigation, search This is a property of type String. Fans Pages using the property "Building/SPElectrtyUsePercFans" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 7.29539104961 + Sweden Building 05K0002 + 16.7673965927 + Sweden Building 05K0003 + 27.9131959869 + Sweden Building 05K0004 + 12.2479817873 + Sweden Building 05K0005 + 29.1925346224 + Sweden Building 05K0006 + 15.8653423601 + Sweden Building 05K0007 + 12.809449974 + Sweden Building 05K0008 + 22.2979541594 + Sweden Building 05K0009 + 22.7088540206 + Sweden Building 05K0010 + 13.3738132017 + Sweden Building 05K0011 + 25.1040933765 + Sweden Building 05K0012 + 22.6542018423 + Sweden Building 05K0013 + 24.3166483485 +

98

Small-scale event sport tourism: fans as tourists  

Science Journals Connector (OSTI)

College sports events have the potential to increase city revenue and community spirit, while increasing traveler's awareness of the local community. This two-part study focuses on the tourism-related behaviors of fans who follow the University of Florida (USA) football team (the Gators). In the fall of 1999, 181 Gator fans were surveyed. Descriptive statistics illustrated that Sport Excursionists and Sport Tourists spent money on food and shopping while attending games, but their main motivation was to see the game. In the fall of 2000, 20 Gator fans took part in follow-up face-to-face interviews. Three themes emerged from the data about their travel-related behaviors when attending football games: (a) being a fan; (b) pilgrimages to the mecca of Gator football; and (c) on the road with the team. Further analysis of the results revealed that Gator fans are more likely to engage in traditional tourist behaviors while attending away games. Therefore, it is hypothesized that the tourism benefits for small communities may lie in leveraging the events to the visiting team's fans.

Heather J Gibson; Cynthia Willming; Andrew Holdnak

2003-01-01T23:59:59.000Z

99

Photo of the Week: Fan-tastic | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fan-tastic Fan-tastic Photo of the Week: Fan-tastic August 17, 2012 - 10:30am Addthis In Jonesboro, Arkansas, a Nordex USA employee stands between utility-scale components that will eventually make up a completed wind turbine. Under the Recovery Act, Nordex USA received a tax credit to assist in the creation of the Jonesboro manufacturing facility, which opened in October 2010. | Photo courtesy of Nordex USA. In Jonesboro, Arkansas, a Nordex USA employee stands between utility-scale components that will eventually make up a completed wind turbine. Under the Recovery Act, Nordex USA received a tax credit to assist in the creation of the Jonesboro manufacturing facility, which opened in October 2010. | Photo courtesy of Nordex USA. Sarah Gerrity Sarah Gerrity Multimedia Editor, Office of Public Affairs

100

Performance and Stability Analysis of a Shrouded-Fan UAV  

E-Print Network (OSTI)

This paper deals with the estimation of the performance and stability for a shrouded-fan unmanned rotorcraft whose mission profile also prescribes the flight in ground effect. The not so simple estimation of the aerodynamic coefficients and of the thrust in the various situations makes the performance calculation and the stability analysis difficult tasks. This is due to the strong interaction between the fan flow and shroud that causes quite different flow structures about the airframe depending on flight conditions. A further difficulty is related to the ground effect which produces substantial modifications in the rotor thrust and aerodynamic coefficients. To evaluate performance and stability, two models have been developed. One determines the aerodynamic coefficients of the shroud, whereas the other one calculates thrust and moment of the rotors system. Both models take into account the mutual interference between fan flow and fuselage and ground effect. Performance and stability are then discussed with ...

de Divitiis, Nicola

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Geomorphology and morphometric characteristics of alluvial fans, Guadalupe Mountains National Park and adjacent areas, west Texas and New Mexico  

E-Print Network (OSTI)

............................................................ 29 14 Alluvial fans along the Guadalupe Mountains in Big Dog Canyon........ 31 15 Alluvial fans along the Brokeoff Mountains in Big Dog Canyon........... 35 16 View of alluvial fans from their drainage basins.................................. 75 27 Salt Basin-Brokeoff Mountains alluvial fan group ................................. 76 28 Big Dog Canyon-Brokeoff Mountains alluvial fan group....................... 77 29 Big Dog Canyon-Guadalupe Mountains alluvial fan group...

Given, Jeffrey Lyle

2004-09-30T23:59:59.000Z

102

Use of VFDs on Asphalt Plant Induced Draft Fans  

E-Print Network (OSTI)

mixer at the burner end and flows across the aggregate as it moves toward the burner. The hot air Extrapolating savings achieved with 10 asphalt plants in the Intermountain West, almost 200,000 MWh of annual energy savings could be achieved... Name Damper Plant kWh Fan kWh Fan % Staker West Haven Outlet 1,021,040 ,68130% Ogden Plant Outlet 548,640 171,257 31% POM Plant Outlet 1,284,480 ,61825% Orem Plant Inlet 890,250 96,731 11% Staker Cedar City Outlet 502,320 115,949 23% Staker Beck Street...

Anderson, G. R.; Case, P. L.; Lowery, J.

2005-01-01T23:59:59.000Z

103

Amateur experts: International fan labor in Swedish independent music  

E-Print Network (OSTI)

of Swedish music than we have, which is kind of cool.” Well-placed fans can even break bands. Nick Levine, explains how he and his partner in the London’s Swedish nightclub Tack!Tack!Tack! (which had a strong MySpace presence of its own) influenced... work by positioning themselves as enthusiasts too far outside the scene to merit economic reward. These fans sometimes took umbrage to implications that they are involved in the scene, doing work, or should be paid: I don’t want to say I’m “involved...

Baym, Nancy K.; Burnett, Robert

2009-09-01T23:59:59.000Z

104

Experimental investigation on the energy-saving diffuser of a main fan  

Science Journals Connector (OSTI)

The main fan diffuser in a coal mine is an energy-recycling equipment with a dynamic energy loss for the main fan. Engineering practices ... are irrational. To solve the problem, an energy-saving diffuser is desi...

Shi-qiang Chen; Hai-qiao Wang…

2012-03-01T23:59:59.000Z

105

2014-10-27 Issuance: Test Procedure for Ceiling Fan Light Kits...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

27 Issuance: Test Procedure for Ceiling Fan Light Kits; Notice of Proposed Rulemaking 2014-10-27 Issuance: Test Procedure for Ceiling Fan Light Kits; Notice of Proposed Rulemaking...

106

A Method for Evaluating the Application of Variable Frequency Drives with Coal Mine Ventilation Fans.  

E-Print Network (OSTI)

??The adjustable-pitch setting on an axial-flow fan is the most common method of controlling airflow for primary coal mine ventilation. With this method, the fan… (more)

Murphy, Tyson M.

2006-01-01T23:59:59.000Z

107

Improve the Energy Efficiency of Fan Systems, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

SciTech Connect

This fact sheet describes how the Industrial Technologies Program Fan System Assessment Tool (FSAT) can help quantify energy consumption and savings opportunities in industrial fan systems.

Not Available

2008-12-01T23:59:59.000Z

108

DOE Publishes Notice of Proposed Rulemaking for Residential Furnace Fans Energy Conservation Standards  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Energy has published a notice of proposed rulemaking regarding energy conservation standards for residential furnace fans.

109

Fan Aerodynamic Performance Guarantees: Do Your Policies, Procedures and Penalties Provide Adequate Certainty?  

E-Print Network (OSTI)

With few exceptions, fan vendors do not provide a written guarantee regarding aerodynamic performance. Some fan vendors even go so far as to state in their terms and conditions of sale that fan performance is not guaranteed unless it is specifically...

Kaufman, S. G.; Martin, V.; Falk, M. A.

2004-01-01T23:59:59.000Z

110

Early to middle Miocene foraminifera from the deep-sea Congo Fan, offshore Angola  

E-Print Network (OSTI)

Early to middle Miocene foraminifera from the deep-sea Congo Fan, offshore Angola Severyn Kender,1 section of an exploration well penetrating the distal part of the Congo Fan (~2000m water depth) yielded Miocene Monterey Carbon Isotope Excursion. INTRODUCTION The Congo Fan has been the subject

Kaminski, Michael A.

111

INTRODUCTION The Congo Fan is the distal component of the sec-  

E-Print Network (OSTI)

INTRODUCTION The Congo Fan is the distal component of the sec- ond largest delta system the Congo River and its associated tributaries (see Goudie, 2005). The Congo Fan is a terrigenous wedge foraminiferal microfauna from the 107 Oligocene Deep-Water Agglutinated Foraminifera from the Congo Fan

Kaminski, Michael A.

112

Submarine fan lobe models: Implications for reservoir properties  

SciTech Connect

A multitude of submarine fan lobe models, advocating widely different reservoir properties, has been introduced into the sedimentologic literature. Four of these models are compared to show their differences in reservoir properties. Braided suprafan lobes are characterized by stacked sand bodies with good lateral and vertical communication, and they constitute excellent reservoir facies. The unchanneled depositional lobes, composed of sheetlike sand bodies with good lateral and moderate vertical communication, exhibit properties of good reservoir facies. Fanlobes, which refer to meandering channels and associated levee facies of large mud-rich submarine fans such as the Mississippi Fan in the Gulf of Mexico, are characterized by offset stacked sand bodies with poor lateral and vertical communication. These lenticular sands have the potential to be moderately good reservoir facies. Ponded lobes, which represent mud-rich slump facies of slope environments, comprise poor reservoir facies because of poor sand content and poor sand-body connectivity caused by chaotic bedding. Furthermore, the presence of slumped mud layers in ponded lobes is expected to hinder fluid flow. Because different lobe models vary significantly from one another in terms of reservoir properties, caution must be exercised to apply the proper lobe model to ancient fan sequences in hydrocarbon exploration and production.

Shanmugam, G.; Moiola, R.J. (Mobil Research and Development Corp., Dallas, TX (USA))

1990-09-01T23:59:59.000Z

113

Performance of ECM controlled VAV fan powered terminal units  

E-Print Network (OSTI)

2006). The airflow and power consumption performance models had an R2 equal to 0.990 or greater for every terminal unit tested. An air leakage model was employed to account for leakage in the parallel designed VAV terminal units when the internal fan...

Cramlet, Andrew Charles

2009-05-15T23:59:59.000Z

114

Heuristics for Balancing Turbine Fans Samir V. Amiouny  

E-Print Network (OSTI)

April 20, 1997 Abstract We develop heuristics for a problem that models the static balancing of turbine Reiger, 1986. In some cases, such as in the constructionof hydraulic, steam or gas turbines, fan blades to counteract the residual un- balance. For gas and steam turbines, this is necessary not only when the engine

Bartholdi III, John J.

115

Alluvial-fan deposits of Eldorado and Piute Valleys Alluvial-fan deposits are mapped as allostratigraphic units  

E-Print Network (OSTI)

that may be subject to intermittent flooding from active channels. Young alluvial-fan depositsMFan-piedmont and interfluvial wash terrace remnants; pebble-cobble to boulder gravel; small pebble sand where dominated by grus-cobble to boulder gravel. Deposits are poorly sorted; generally matrix supported; poorly to moderately stratified

Tingley, Joseph V.

116

Critical point anomalies include expansion shock waves  

SciTech Connect

From first-principle fluid dynamics, complemented by a rigorous state equation accounting for critical anomalies, we discovered that expansion shock waves may occur in the vicinity of the liquid-vapor critical point in the two-phase region. Due to universality of near-critical thermodynamics, the result is valid for any common pure fluid in which molecular interactions are only short-range, namely, for so-called 3-dimensional Ising-like systems, and under the assumption of thermodynamic equilibrium. In addition to rarefaction shock waves, diverse non-classical effects are admissible, including composite compressive shock-fan-shock waves, due to the change of sign of the fundamental derivative of gasdynamics.

Nannan, N. R., E-mail: ryan.nannan@uvs.edu [Mechanical Engineering Discipline, Anton de Kom University of Suriname, Leysweg 86, PO Box 9212, Paramaribo, Suriname and Process and Energy Department, Delft University of Technology, Leeghwaterstraat 44, 2628 CA Delft (Netherlands); Guardone, A., E-mail: alberto.guardone@polimi.it [Department of Aerospace Science and Technology, Politecnico di Milano, Via La Masa 34, 20156 Milano (Italy); Colonna, P., E-mail: p.colonna@tudelft.nl [Propulsion and Power, Delft University of Technology, Kluyverweg 1, 2629 HS Delft (Netherlands)

2014-02-15T23:59:59.000Z

117

Variable Speed Fan Retrofits for Computer Room Air Conditioners  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Variable-Speed Fan Variable-Speed Fan Retrofits for Computer-Room Air Conditioners Prepared for the U.S. Department of Energy Federal Energy Management Program Technology Case Study Bulletin By Lawrence Berkeley National Laboratory Steve Greenberg September 2013 2 Contacts Steve Greenberg Lawrence Berkeley National Laboratory One Cyclotron Road, 90R3111 Berkeley, California 94720 (510) 486-6971 segreenberg@lbl.gov For more information on FEMP, please contact: Will Lintner, P.E., CEM Federal Energy Management Program U.S. Department of Energy 1000 Independence Ave. S.W. Washington, D. C. 20585-0121 (202) 586-3120 william.lintner@ee.doe.gov 3 Acknowledgements EPRI: Dennis Symanski, Brian Fortenbery Synapsense: Garret Smith, Patricia Nealon Vigilent: Corinne Vita

118

Polycyclic aromatic hydrocarbon distributions in Mississippi Fan sediments  

E-Print Network (OSTI)

. Sandberg, B. A. , University of Colorado Chairman of Advisory Committee: Dr. James M. Brooks Polycyclic aromatic hydrocarbon (PAH) distributions in Upper Pleistocene sediments of the Mississippi Fan and two intraslope basins in the Gulf of Mexico... chemistries is separate phase migration driven by hydrodynamic flow upward along fault planes. The same variables at intraslope basin sites are highly altered, possibly due to extensive gravity slump faulting. High- performance liquid chromatography...

Sandberg, William Allan

2012-06-07T23:59:59.000Z

119

Types of submarine fan lobes: Models and implications  

SciTech Connect

Different lobe models imply significantly different reservoir geometries; thus, one must apply the proper lobe model to ancient fan sequences. Braided suprafan lobes are characterized by stacked channel sand bodies with good lateral and vertical communication, and they constitute excellent reservoir facies. Depositional lobes, composed of sheet-like sand bodies with good lateral and moderate vertical communication, exhibit properties of good reservoir facies. Fanlobes, which refer to meandering channels and associated levee facies of large mud-rich submarine fans such as the Mississippi fan, are characterized by offset stacked sand bodies with poor lateral and vertical communication .These lenticular sands have the potential to be moderately good reservoir facies. Ponded lobes, which represent mud-rich slump facies of slope environments, comprise poor reservoir facies because of low sand content and poor sand-body connectivity. Furthermore, the presence of contorted mud layers in ponded lobes is expected to hinder fluid flow. External mounded reflections in seismic profiles often are interpreted as lobes; however, there are no definite seismic criteria to delineate mud-rich lobes from sand-rich lobes.

Shanmugam, G.; Moiola, R.J. (Mobil Research and Development Corp., Dallas, TX (United States))

1991-01-01T23:59:59.000Z

120

Turning on the Fan and Turning off the A/C | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Turning on the Fan and Turning off the A/C Turning on the Fan and Turning off the A/C Turning on the Fan and Turning off the A/C September 20, 2010 - 3:00pm Addthis As part of some recent money- and energy-savings improvements I've been making to my home, a couple of weeks ago I installed a ceiling fan in my main living room. Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory As part of some recent money- and energy-savings improvements I've been making to my home, a couple of weeks ago I installed a ceiling fan in my main living room. Part of my research led me to understand how ceiling fans are considered the most effective fans compared among table fans, floor fans, and fans mounted to poles or walls because they effectively circulate the air in a room to create a draft throughout the room.

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Turning on the Fan and Turning off the A/C | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Turning on the Fan and Turning off the A/C Turning on the Fan and Turning off the A/C Turning on the Fan and Turning off the A/C September 20, 2010 - 3:00pm Addthis As part of some recent money- and energy-savings improvements I've been making to my home, a couple of weeks ago I installed a ceiling fan in my main living room. Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory As part of some recent money- and energy-savings improvements I've been making to my home, a couple of weeks ago I installed a ceiling fan in my main living room. Part of my research led me to understand how ceiling fans are considered the most effective fans compared among table fans, floor fans, and fans mounted to poles or walls because they effectively circulate the air in a room to create a draft throughout the room.

122

Geological overview of the Angola-Congo Margin, the Congo deep-sea fan and its submarine valleys  

E-Print Network (OSTI)

The Congo deep-sea fan is one of the largest fans in the world still affected by presently active turbidity currents. The present activity of deep-sea sedimentary processes is linked to the existence of a direct connection between the Congo River estuary and the Congo canyon head that allows relatively continuous sediment feeding of the deep-sea environment, in spite of a wide continental shelf (150 km). Because of this important activity in terms of sedimentary processes, the deep-sea environment of the Congo-Angola margin presents major interests concerning physical, chemical and biological studies near the sea floor. The main aim of this paper is to present the initial geological context of the BioZaire Program, showing a synthesis of the major results of the ZaïAngo Project including (1) the brief geological setting of the Congo-Angola margin, (2) the structure of the modern Congo deep-sea fan, (3) the sedimentary architecture of the recent Congo turbidite system (from the canyon to the distal lobes), and (4) the recent and present turbidite sedimentation. In order to provide useful information and advice relevant to biological and geochemical studies across the Congo sedimentary system, this article focuses on the present sedimentary processes and the present activity of turbidity current along the Congo canyon and channel.

unknown authors

2009-01-01T23:59:59.000Z

123

Equipartition of two measures by a 4-fan Imre B ar any  

E-Print Network (OSTI)

, there is a point and four hal ines emanating form it such that each of the four sectors have measure 1=4 in both are used here without much change. A point x in the plane and four hal ines, ` 1 ; ` 2 ; ` 3 ; ` 4 of S 2 . A 4-fan in R 2 is lifted to a 4-fan in S 2 in a natural way: a spherical 4-fan is a point x 2

Bárány, Imre

124

Development of In-Situ Fan Curve Measurement with One Airflow Measurement  

E-Print Network (OSTI)

Development of In-situ Fan Curve Measurement with One Airflow Measurement Guopeng Liu, Ik-Seong Joo, Li Song, Mingsheng Liu, Ph.D., P.E. Energy Systems Laboratory University of Nebraska ABSTRACT Fan airflow is the key parameter for air... is another issue for this method. Therefore, it is very important to find an effective way to measure the airflow accurately. An airflow control named VSD volumetric tracking (VSDVT) has been developed by Liu [13] recently. This method uses fan...

Liu, G.; Joo, I. S.; Song, L.; Liu, M.

2003-01-01T23:59:59.000Z

125

Air-Side Energy Use Calculations for Four HVAC Systems: Dual Duct Constant Volume (DDCAV), Dual Duct Variable Volume (DDVAV), Constant Volume with Reheat (CAVRH), Variable Volume with Reheat (VAVRH), Four Pipe Fan Coil Unit (FC), Four Pipe Induction Unit (FI), and Single Zone (SZ) Systems, Revised June 2002  

E-Print Network (OSTI)

(CAVRH), and variable volume with reheat (VAVRH), four pipe fan coil unit (FC), four pipe induction unit (FI), and a single zone air conditioning system (SZ). These calculations are presented in spreadsheets that include a running commentary so...

Haberl, J. S.; Bou-Saada, T. E.; Saman, N. F.

2001-01-01T23:59:59.000Z

126

How Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? How Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? September 23, 2010 - 7:30am Addthis On Monday, Chris told you about his new ceiling fan and how it's changed the way he cools his home. In warm weather, ceiling fans cool people (not rooms) by producing a wind-chill effect-which is why you should turn off fans when you leave the room. A ceiling fan allows you to raise the thermostat setting about 4°F with no reduction in comfort. Ceiling fans don't just cool in the summer; you can also reverse the direction in the winter to provide an updraft and force warm air down into the room. How has a ceiling fan affected the way you heat and cool your home? Each Thursday, you have the chance to share your thoughts on a question

127

How Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? How Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? September 23, 2010 - 7:30am Addthis On Monday, Chris told you about his new ceiling fan and how it's changed the way he cools his home. In warm weather, ceiling fans cool people (not rooms) by producing a wind-chill effect-which is why you should turn off fans when you leave the room. A ceiling fan allows you to raise the thermostat setting about 4°F with no reduction in comfort. Ceiling fans don't just cool in the summer; you can also reverse the direction in the winter to provide an updraft and force warm air down into the room. How has a ceiling fan affected the way you heat and cool your home? Each Thursday, you have the chance to share your thoughts on a question

128

E-Print Network 3.0 - alluvial fan sedimentation Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

alluvial fans commonly occur with little to no warning, and have high velocities and sediment... with little warning, travel at high speeds, and carry massive amounts of sediment...

129

E-Print Network 3.0 - alluvial fan surfaces Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Park: Climatic and intrinsic controls on Holocene geomorphic processes Summary: similar burn surfaces in numerous alluvial-fan stratigraphic sections (Figs. 3b and 3c). Rarely......

130

Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers  

E-Print Network (OSTI)

8.0 percent. The reduced electrical energy use at the siteamount of fan electrical energy can be conserved. The4 megawatts; overall site electrical energy savings provided

Coles, Henry

2014-01-01T23:59:59.000Z

131

Genetic stratigraphy of a part of the Miocene Congo Fan, West Africa  

Science Journals Connector (OSTI)

Abstract The stratigraphic framework and reservoir distribution are essential factors controlling the accumulation of petroleum in the Miocene Congo Fan. Analysis of cores, well logs, and seismic data suggest that the submarine fan autocycle (genetic cycle) is presented by sequence of slump, debrite, densite currents, and turbidites, whereas allocycles (long-term cycles) may be composed of several autocycles (short-term cycles) that, appear as a stacking pattern or retrogradational fan. Scour surfaces at the base of gravity flow channel, stable hemipelagic mudstone section, and the surface between fan retrogradation and progradation can be used for the correlations.

Zhenglong Jiang; Rong Wang; Wenbo Zheng

2014-01-01T23:59:59.000Z

132

Laboratory evaluation of fan/filter units' aerodynamic and energy performance  

SciTech Connect

The paper discusses the benefits of having a consistent testing method to characterize aerodynamic and energy performance of FFUs. It presents evaluation methods of laboratory-measured performance of ten relatively new, 1220 mm x 610 mm (or 4 ft x 2 ft) fan-filter units (FFUs), and includes results of a set of relevant metrics such as energy performance indices (EPI) based upon the sample FFUs tested. This paper concludes that there are variations in FFUs' performance, and that using a consistent testing and evaluation method can generate compatible and comparable FFU performance information. The paper also suggests that benefits and opportunities exist for our method of testing FFU energy performance to be integrated in future recommended practices.

Xu, Tengfang; Jeng, Ming-Shan

2004-07-27T23:59:59.000Z

133

An optical fan for light beams for high-precision optical measurements and optical switching  

E-Print Network (OSTI)

The polarization and orbital angular momentum properties of light are of great importance in optical science and technology in the fields of high precision optical measurements and high capacity and high speed optical communications. Here we show, a totally new method, based on a combination of these two properties and using the thermal dispersion and electro-optical effect of birefringent crystals, the construction of a simple and robust scheme to rotate a light beam like a fan. Using a computer-based digital image processing technique, we determine the temperature and the thermal dispersion difference of the crystal with high resolution. We also use the rotation phenomenon to realize thermo-optic and electro-optic switches. The basic operating principles for measurement and switching processes are presented in detail. The methods developed here will have wide practical applicability in various fields, including remote sensing, materials science and optical communication networks.

Zhou, Zhi-Yuan; Ding, Dong-Sheng; Jiang, Yun-Kun; Zhang, Wei; Shi, Shuai; Shi, Bao-Sen; Guo, Guang-Can

2014-01-01T23:59:59.000Z

134

An optical fan for light beams for high-precision optical measurements and optical switching  

E-Print Network (OSTI)

The polarization and orbital angular momentum properties of light are of great importance in optical science and technology in the fields of high precision optical measurements and high capacity and high speed optical communications. Here we show, a totally new method, based on a combination of these two properties and using the thermal dispersion and electro-optical effect of birefringent crystals, the construction of a simple and robust scheme to rotate a light beam like a fan. Using a computer-based digital image processing technique, we determine the temperature and the thermal dispersion difference of the crystal with high resolution. We also use the rotation phenomenon to realize thermo-optic and electro-optic switches. The basic operating principles for measurement and switching processes are presented in detail. The methods developed here will have wide practical applicability in various fields, including remote sensing, materials science and optical communication networks.

Zhi-Yuan Zhou; Yan Li; Dong-Sheng Ding; Yun-Kun Jiang; Wei Zhang; Shuai Shi; Bao-Sen Shi; Guang-Can Guo

2014-05-08T23:59:59.000Z

135

Reconstructing the timing of flash floods using 10Be surface exposure dating at Leidy Creek alluvial fan and valley, White Mountains, California–Nevada, USA  

Science Journals Connector (OSTI)

Abstract Large alluvial fans characterize the piedmonts of the White Mountains, California–Nevada, USA, with large boulders strewn across their surfaces. The boulders are interpreted as flash floods deposits with an unclear trigger for the transport process. Several triggers are possible, including glacial lake outburst floods (GLOFs), thunderstorms or rainfall on snow cover. From a paleoenvironmental perspective, the origin of the flash floods is of fundamental importance. The alluvial fans that flank the White Mountains at Leidy Creek display particularly impressive examples of these deposits. The boulder deposits and the source catchment at Leidy Creek were examined using 10Be terrestrial cosmogenic nuclide (TCN) surface exposure dating to help elucidate their age and origin. All boulders dated on the alluvial fans date to the Holocene. This is in accordance with the geomorphic analyses of the Leidy Creek catchment and its terraces and sediment ridges, which were also dated to the Holocene using optically stimulated luminescence (OSL) and 10Be surface exposure. The results suggest that the boulders on the alluvial fan were deposited by flash floods during thunderstorm events affecting the catchment of the Leidy Creek valley. Paleomonsoonal-induced mid-Holocene flash floods are the most plausible explanation for the discharges needed for these boulder aggradations, but a regional dataset is needed to confirm this explanation.

Markus Fuchs; Rebecca Reverman; Lewis A. Owen; Kurt L. Frankel

2014-01-01T23:59:59.000Z

136

Basin-floor fans in the North Sea: Sequence stratigraphic models vs. sedimentary facies  

SciTech Connect

Examination of nearly 12,000 feet (3658m) of conventional core from Paleogene and Cretaceous deep-water sandstone reservoirs cored in 50 wells in 10 different areas or fields in the North Sea and adjacent regions reveals that these reservoirs are predominantly composed of mass-transport deposits, mainly sandy slumps and sandy debris flows. Sedimentary features indicating slump and debris-flow origin include sand units with sharp upper contacts; slump folds; discordant, steeply dipping layers (up to 60{degrees}); glide planes; shear zones; brecciated clasts; clastic injections; floating mudstone clasts; planar clast fabric; inverse grading of clasts; and moderate-to-high matrix content (5-30%). This model predicts that basin-floor fans are predominantly composed of sand-rich turbidites with laterally extensive, sheetlike geometries. However, calibration of sedimentary facies in our long (400-700 feet) cores with seismic and wire-line-log signatures through several of these basin-floor fans (including the Gryphon-Forth, Frigg, and Faeroe areas) shows that these features are actually composed almost exclusively of mass-transport deposits consisting mainly of slumps and debris flows. Distinguishing deposits of mass-transport processes, such as debris flows, from those of turbidity currents has important implications for predicting reservoir geometry. Debris flows, which have plastic flow rheology, can form discontinuous, disconnected sand bodies that are harder to delineate and less economical to develop than deposits of fluidal turbidity currents, which potentially produce more laterally continuous, interconnected sand bodies. Process sedimentological interpretation of conventional core is commonly critical for determining the true origin and distribution of reservoir sands.

Shanmugam, G.; Bloch, R.B. [Mobil Research and Development Corp., Dallas, TX (United States); Mitchell, S.M. [Mobil Exploration and Producing US, Inc., Dallas, TX (United States); Beamish, G.W.J.; Shields, K.E. [Mobil North Sea Ltd., London (United Kingdom); Hodgkinson, R.J.; Straume, T.; Syvertsen, S.E. [Mobil Exploration Norway, Inc., Stavanger (Norway); Damuth, J.E. [Univ. of Texas, Arlington, TX (United States)

1995-04-01T23:59:59.000Z

137

Aerodynamic Thrust Modelling in Wave Tank Tests of Offshore Floating Wind Turbines Using a Ducted Fan  

Science Journals Connector (OSTI)

Wave tank testing of scaled models is standard practice during the development of floating wind turbine platforms for the validation of the dynamics of conceptual designs. Reliable recreation of the dynamics of a full scale floating wind turbine by a scaled model in a basin requires the precise scaling of the masses and inertias and also the relevant forces and its frequencies acting on the system. The scaling of floating wind turbines based on the Froude number is customary for basin experiments. This method preserves the hydrodynamic similitude, but the resulting Reynolds number is much lower than in full scale. The aerodynamic loads on the rotor are therefore out of scale. Several approaches have been taken to deal with this issue, like using a tuned drag disk or redesigning the scaled rotor. This paper describes the implementation of an alternative method based on the use of a ducted fan located at the model tower top in the place of the rotor. The fan can introduce a variable force that represents the total wind thrust by the rotor. A system controls this force by varying the rpm, and a computer simulation of the full scale rotor provides the desired thrust to be introduced by the fan. This simulation considers the wind turbine control, gusts, turbulent wind, etc. The simulation is performed in synchronicity with the test and it is fed in real time by the displacements and velocities of the platform captured by the acquisition system. Thus, the simulation considers the displacements of the rotor within the wind field and the calculated thrust models the effect of the aerodynamic damping. The system is not able currently to match the effect of gyroscopic momentum. The method has been applied during a test campaign of a semisubmersible platform with full catenary mooring lines for a 6MW wind turbine in scale 1/40 at Ecole Centrale de Nantes. Several tests including pitch free decay under constant wind and combined wave and wind cases have been performed. Data from the experiments are compared with aero-servo-hydro-elastic computations with good agreement showing the validity of the method for the representation of the scaled aerodynamics. The new method for the aerodynamic thrust scaling in basin tests is very promising considering its performance, versatility and lower cost in comparison with other methods.

José Azcona; Faisal Bouchotrouch; Marta González; Joseba Garciandía; Xabier Munduate; Felix Kelberlau; Tor A Nygaard

2014-01-01T23:59:59.000Z

138

Pump apparatus including deconsolidator  

DOE Patents (OSTI)

A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

2014-10-07T23:59:59.000Z

139

University of Nevada Las Vegas Arduino Project Report: Fan Speed Control as a Function of Thermistor  

E-Print Network (OSTI)

University of Nevada Las Vegas Arduino Project Report: Fan Speed Control as a Function, and an arduino board. The arduino board is programmed to read the analog input, the thermistor, and respond by the arduino that will decrease the speed of the fan. Furthermore, if the temperature goes up, the resistance

Kachroo, Pushkin

140

The Spacing of Ceiling Fans for Human Comfort in Warm Temperature Conditions  

E-Print Network (OSTI)

Airspeed tests of a commercially popular 52 in. ceiling fan operating at a low speed of 155 fpm provided sufficient airspeed for comfort to 82F in an average floor area of 97.2 ft^2 beneath the fan. When operating at maximum speed, the average floor...

Spain, S.

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Reworking of Aggraded Debris Fans by the 1996 Controlled Flood on the Colorado  

E-Print Network (OSTI)

Reworking of Aggraded Debris Fans by the 1996 Controlled Flood on the Colorado River in Grand with the BUREAU OF RECLAMATION #12;Reworking of Aggraded Debris Fans by the 1996 Controlled Flood on the Colorado ....................................................................................................................... 6 Effects of debris flows on the Colorado River

142

Boost Converter Provides Temperature-Controlled Operation of 12V Fan from +5V Supply  

E-Print Network (OSTI)

Boost Converter Provides Temperature-Controlled Operation of 12V Fan from +5V Supply John Mc rated (12V supply) speed. Fan speed is controlled by sensing the ambient temperature in the system that the temperature control characteristic is unaffected by supply variations. The negative feedback loop

McNeill, John A.

143

Energy Efficient Single Stack Exhaust Fan Systems (E3S3F)  

E-Print Network (OSTI)

This paper first investigates the fan energy performance of a constant air volume exhaust system. Two single stack energy efficient exhaust fan systems (E3S3F) are presented. The E3S3F-I has the static pressure sensor located at the inlet...

Wang, G.; Liu, M.

2001-01-01T23:59:59.000Z

144

Inlet swirl distortion effects on the generation and propagation of fan rotor shock noise  

E-Print Network (OSTI)

A body-force-based fan model for the prediction of multiple-pure-tone noise generation is developed in this thesis. The model eliminates the need for a full-wheel, three-dimensional unsteady RANS simulation of the fan blade ...

Defoe, Jeff (Jeffrey James)

2011-01-01T23:59:59.000Z

145

Fan-deltas and braid deltas: Varieties of coarse-grained deltas: Discussion and reply  

Science Journals Connector (OSTI)

...longitudinal profile analysis (Fig. 5, McPherson and others, 1987) to make the point that we were not considering only dry-type alluvial fans. Many other examples of wet-type fans exist in the literature (for example, Kochel and Johnson, 1984...

L. A. DUNNE; JOHN G. McPHERSON; GANAPATHY SHANMUGAM; RICHARD J. MOIOLA

146

Statistic inversion of multi-zone transition probability models for aquifer characterization in alluvial fans  

E-Print Network (OSTI)

Understanding the heterogeneity arising from the complex architecture of sedimentary sequences in alluvial fans is challenging. This paper develops a statistical inverse framework in a multi-zone transition probability approach for characterizing the heterogeneity in alluvial fans. An analytical solution of the transition probability matrix is used to define the statistical relationships among different hydrofacies and their mean lengths, integral scales, and volumetric proportions. A statistical inversion is conducted to identify the multi-zone transition probability models and estimate the optimal statistical parameters using the modified Gauss-Newton-Levenberg-Marquardt method. The Jacobian matrix is computed by the sensitivity equation method, which results in an accurate inverse solution with quantification of parameter uncertainty. We use the Chaobai River alluvial fan in the Beijing Plain, China, as an example for elucidating the methodology of alluvial fan characterization. The alluvial fan is divided...

Zhu, Lin; Gong, Huili; Gable, Carl; Teatini, Pietro

2015-01-01T23:59:59.000Z

147

Four new species of deep water agglutinated foraminifera from the OligoceneMiocene of the Congo Fan  

E-Print Network (OSTI)

Four new species of deep water agglutinated foraminifera from the Oligocene­Miocene of the Congo-water agglutinated benthic foraminifera are described from the Oligocene and Miocene of the Congo Fan, offshore the distal section of the Congo Fan. INTRODUCTION The Congo Fan is a terrigenous wedge largely built

Kaminski, Michael A.

148

Microsoft Word - Control_and_Fan_Improvements_in_CRAHs.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

07E 07E Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers Henry Coles and Steve Greenberg, Lawrence Berkeley National Laboratory Corinne Vita, Vigilent Environmental Energy Technologies Division November 2012 DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe

149

Fan-shape optimisation using CFD and genetic algorithms for increasing the efficiency of electric motors  

Science Journals Connector (OSTI)

The electric motor efficiency represents the effectiveness with which the motor converts electrical energy into mechanical energy. As the energy losses are converted into heat, which is dissipated by the motor frame aided by internal and external fans, a better cooling system adds up to better efficiency. In recent years, improvements in motor efficiency have been achieved but at higher costs. By using Genetic Algorithms (GAs), changes are introduced to the fan shape looking for a better aerodynamic performance. The evaluation of the achieved fan efficiency with the modified shapes is performed with Computational Fluid Dynamics (CFD) simulation software.

Noel Leon-Rovira; Eduardo Uresti; Waldo Arcos

2007-01-01T23:59:59.000Z

150

Integrating VAV zone requirements with supply fan operation. [Variable Air Volume  

SciTech Connect

The use of communicating direct digital controls (DDC) with distributed intelligence offers new opportunities for energy conservation while maintaining occupant comfort in commercial buildings. Integrating control within a single DDC panel improves performance. Integrating control by communications between multiple controllers can further enhance system operation. One example is a DDC static pressure reset strategy for supply fan operation in variable air volume (VAV) supply air distribution systems. This strategy integrates the requirements of the VAV terminal units serving the building zones to minimize fan energy use. This article describes terminal unit operation, supply fan control, concurrent polling, operational data and power savings.

Warren, M.L. (ASI Controls, San Ramon, CA (United States)); Norford, L.K. (Massachusetts Inst. of Tech., Cambridge (United States))

1993-04-01T23:59:59.000Z

151

Property:Building/SPBreakdownOfElctrcityUseKwhM2Fans | Open Energy  

Open Energy Info (EERE)

Fans Fans Jump to: navigation, search This is a property of type String. Fans Pages using the property "Building/SPBreakdownOfElctrcityUseKwhM2Fans" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 5.21311928139 + Sweden Building 05K0002 + 18.5995610535 + Sweden Building 05K0003 + 20.3514016294 + Sweden Building 05K0004 + 8.08671679198 + Sweden Building 05K0005 + 16.0166245259 + Sweden Building 05K0006 + 10.358795651 + Sweden Building 05K0007 + 8.3953561818 + Sweden Building 05K0008 + 9.28527472527 + Sweden Building 05K0009 + 12.8398873749 + Sweden Building 05K0010 + 20.0966982674 + Sweden Building 05K0011 + 6.90408963585 + Sweden Building 05K0012 + 8.60719192175 + Sweden Building 05K0013 + 16.7539365907 +

152

Property:Building/SPBreakdownOfElctrcityUseKwhM2CirculationFans | Open  

Open Energy Info (EERE)

CirculationFans CirculationFans Jump to: navigation, search This is a property of type String. Circulation fans Pages using the property "Building/SPBreakdownOfElctrcityUseKwhM2CirculationFans" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 13.3422495258 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 2.80646609789 + Sweden Building 05K0004 + 8.95823904901 + Sweden Building 05K0005 + 5.55016340076 + Sweden Building 05K0006 + 6.81308969891 + Sweden Building 05K0007 + 2.02541916787 + Sweden Building 05K0008 + 0.625641025641 + Sweden Building 05K0009 + 7.59721281624 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 0.757191316527 + Sweden Building 05K0012 + 6.04077487892 + Sweden Building 05K0013 + 0.767224182906 +

153

Design and Operation of Fan-Coil Units in Using River Water as Chilled Water  

E-Print Network (OSTI)

Based on the case research for China's first central air conditioning system utilizing natural cool river water as chilled water, this paper analyzes the technical design-and-innovation process and operating characteristics of Fan-Coil Units (FCUs...

Jiang, A.; Chen, H.; Ma, W.; Zhu, H.

2006-01-01T23:59:59.000Z

154

High-amplitude reflection packets (HARPs) of the Mississippi Fan, Gulf of Mexico  

E-Print Network (OSTI)

sediment volumes. Mississippi Fan HARP deposition can be described by three depositional models: the "avulsion" model, the "fill and spill" model, and the "transition" model. The "avulsion" depositional model, developed by Flood et al. (1991), describes...

Francis, Jason Michael

2012-06-07T23:59:59.000Z

155

Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers  

E-Print Network (OSTI)

metrics. Consider the power for cooling saved because of theadditional infrastructure cooling power based upon 0.464 kW/Associated Infrastructure Cooling Power) Due to Fan Upgrade

Coles, Henry

2014-01-01T23:59:59.000Z

156

Toward green systems for cleanrooms: Energy efficient fan-filter units  

SciTech Connect

The paper presents results of laboratory-measured performance of fan-filter units (FFUs) used for cleanrooms. A total of twenty FFUs collected from the market were tested, including thirteen 1220 mm x 610 mm (or 4 ft x 2 ft) units and seven 1220 mm x 1220 mm (or 4 ft x 4 ft) units. The paper concludes that there are wide variations in FFUs energy performance, and that there are opportunities in improving energy efficiency and lowering operating costs of FFUs. Furthermore, the paper suggests the benefits of having a uniform method for testing and reporting FFU performance. Such a testing method and recommended practice guideline is under development, with heavy input from FFU suppliers, users, and independent institutions that include Lawrence Berkeley National Laboratory (LBNL), Industrial Technology Research Institute (ITRI), and Institute of Environmental Sciences and Technology (IEST). An integrated approach with the participation from designers, suppliers, users, and utility companies can help to identify energy-efficient FFUs that are required for many cleanroom applications.

Jeng, Ming-Shan; Xu, Tengfang; Lan, Chao-Ho

2004-07-12T23:59:59.000Z

157

Some dynamics of carbon, nitrogen and phosphorus in the marine shelf environment of the Mississippi Fan  

E-Print Network (OSTI)

SOME DYNAMICS OF CARBON, NITROGEN AND PHOSPHORUS IN THE MARINE SHELF ENVIRONMENT OF THE MISSISSIPPI FAN A Thesis by DANIEL WAYNE ARMSTRONG Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE December 1974 Major Subject: Chemical Oceanography SOME DYNAMICS OF CARBON NITROGEN, AND PHOSPHORUS IN THE MARINE SHELF ENVIRONMENT OF THE MISSISSIPPI FAN A Thesis by DANIEL WAYNE ARMSTRONG Approved as to style...

Armstrong, Daniel Wayne

1974-01-01T23:59:59.000Z

158

Modeling of Electronically Commutated Motor Controlled Fan-powered Terminal Units  

E-Print Network (OSTI)

Feet Per Minute ECM Electronically Commutated Motor FPTU Fan Powered Terminal Unit Pdown Downstream Static Pressure PF Power Factor Pup Upstream Static Pressure SCR Silicon Controlled Rectifier THD Total Harmonic Distortion VAV Variable Air... parallel unit pressurizes the FPTU causing some of the primary air to leak out of the unit. Another difference between them is that series terminal units allow the primary air system to operate at a lower static pressure because the terminal unit fan...

Edmondson, Jacob Lee

2011-02-22T23:59:59.000Z

159

Core-based evidence for sandy slump and sandy debris flow facies in the Pliocene and Pleistocene of the Gulf of Mexico: Implications for submarine fan models  

SciTech Connect

Examination of nearly 3,500 feet of conventional core from Pliocene and Pleistocene deep-water reservoirs cored in 25 wells in 8 different areas covering the eastern, central and western Gulf of Mexico reveals that the reservoirs are predominantly composed of mass-transport deposits, mainly sandy slumps and sandy debris flows (60-100% of cored intervals). Bottom-current reworked sands are common (10-50%). Of importance to existing submarine fan models is that turbidities are extremely rare (<1 % of all cores). Sedimentary features indicative of slump and debris-flow origin include sand units with sharp upper contacts, slump folds, discordant, steeply dipping layers (up to 60[degrees]), glide planes, shear zones, brecciated clasts, rafted mudstone clasts, planar clast fabric, inverse grading of clasts, and moderate-to-high matrix content (5-20 %). These reservoirs have been interpreted by others to represent turbidite-dominated basin-floor fans and slope fans of the often used sequence stratigraphic model. However, our core data do not show a dominance of turbidities. Sandy debris flows exhibit a variety of log motifs (e.g., blocky, fining-up, and coarsening-up) due to changes in concentration of midstone clasts, and a variety of internal seismic facies (e.g., parallel-continuous, irregular-discontinuous, chaotic -discontinuous, and lateral pinch out) perhaps due to changes in stacking patterns of debris flows and slumps. Classic submarine-fan models, commonly advocated for these reservoirs, may not be appropriate. We propose a slump and debris-flow, dominated slope model in which sea-floor topography and depositional freezing (i.e., plastic flows) control sand distribution and geometry. Contrary to popular belief, sandy debris flows can be thick, areally extensive, and excellent reservoirs.

Shanmugam, G. (Mobil Exploration and Producing Technical Center, Dallas, TX (United States)); Zimbrick, G. (Mobil Exploration and Producing U.S., Dallas, TX (United States))

1996-01-01T23:59:59.000Z

160

Core-based evidence for sandy slump and sandy debris flow facies in the Pliocene and Pleistocene of the Gulf of Mexico: Implications for submarine fan models  

SciTech Connect

Examination of nearly 3,500 feet of conventional core from Pliocene and Pleistocene deep-water reservoirs cored in 25 wells in 8 different areas covering the eastern, central and western Gulf of Mexico reveals that the reservoirs are predominantly composed of mass-transport deposits, mainly sandy slumps and sandy debris flows (60-100% of cored intervals). Bottom-current reworked sands are common (10-50%). Of importance to existing submarine fan models is that turbidities are extremely rare (<1 % of all cores). Sedimentary features indicative of slump and debris-flow origin include sand units with sharp upper contacts, slump folds, discordant, steeply dipping layers (up to 60{degrees}), glide planes, shear zones, brecciated clasts, rafted mudstone clasts, planar clast fabric, inverse grading of clasts, and moderate-to-high matrix content (5-20 %). These reservoirs have been interpreted by others to represent turbidite-dominated basin-floor fans and slope fans of the often used sequence stratigraphic model. However, our core data do not show a dominance of turbidities. Sandy debris flows exhibit a variety of log motifs (e.g., blocky, fining-up, and coarsening-up) due to changes in concentration of midstone clasts, and a variety of internal seismic facies (e.g., parallel-continuous, irregular-discontinuous, chaotic -discontinuous, and lateral pinch out) perhaps due to changes in stacking patterns of debris flows and slumps. Classic submarine-fan models, commonly advocated for these reservoirs, may not be appropriate. We propose a slump and debris-flow, dominated slope model in which sea-floor topography and depositional freezing (i.e., plastic flows) control sand distribution and geometry. Contrary to popular belief, sandy debris flows can be thick, areally extensive, and excellent reservoirs.

Shanmugam, G. [Mobil Exploration and Producing Technical Center, Dallas, TX (United States); Zimbrick, G. [Mobil Exploration and Producing U.S., Dallas, TX (United States)

1996-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

LETTER REPORT INDEPENDENT VERIFICATION OF THE HIGH FLUX BEAM REACTOR DECOMMISSIONING PROJECT FAN HOUSE, BUILDING 704 BNL  

SciTech Connect

5098-LR-01-0 -LETTER REPORT INDEPENDENT VERIFICATION OF THE HIGH FLUX BEAM REACTOR DECOMMISSIONING PROJECT FAN HOUSE, BUILDING 704 BROOKHAVEN NATIONAL LABORATORY

P.C. Weaver

2010-10-22T23:59:59.000Z

162

Optimized Fan Control In Variable Air Volume HVAC Systems Using Static Pressure Resets: Strategy Selection and Savings Analysis.  

E-Print Network (OSTI)

??The potential of static pressure reset (SPR) control to save fan energy in variable air volume HVAC systems has been well documented. Current research has… (more)

Kimla, John

2010-01-01T23:59:59.000Z

163

Stay Cool for Less Money with a Ceiling Fan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Stay Cool for Less Money with a Ceiling Fan Stay Cool for Less Money with a Ceiling Fan Stay Cool for Less Money with a Ceiling Fan May 12, 2009 - 5:00am Addthis Allison Casey Senior Communicator, NREL After a few late snowstorms here in Colorado, I am more than ready to turn off the heat and enjoy some warm spring weather. We haven't had any heat waves here yet, but many of you have already been trying to stay cool; our friends in Washington, D.C. were sweltering (by comparison) in 90+°F weather just a couple short weeks ago! Whether you're still anticipating snow or have broken out the sandals and tank tops, you may be starting to think about keeping your summer cooling costs down. One easy way to keep cool while saving money is using a ceiling fan. Did you know that a ceiling fan could allow you to raise the thermostat

164

Performance analysis of supply and return fans for HVAC systems under different operating strategies of economizer dampers  

Science Journals Connector (OSTI)

HVAC systems and associated equipment consume a relatively large fraction of total building energy consumption, a significant portion of which is attributed to fan operation. The operation of economizer dampers when installed can cause high energy consumption in fans if they are not functioning in proper and optimal manner. This will mainly be due to the potential high pressure drops through those dampers and associated high total pressures that should be developed by supply and/or return fans. It is then necessary to ensure that a proper strategy to operate optimally the economizer dampers is implemented with minimum fan energy use. The paper examines several operation strategies of the economizer dampers and investigates their effects on the performance of both the supply and return fans in HVAC system. It also discusses a new operating strategy for economizer dampers that can lead to lower fan energy use. The strategies are evaluated by simulations for a typically existing HVAC system. Several factors such as the building locations, system characteristics, resistance in the duct where the dampers are installed, supply air temperature and economizer control, and minimum ventilation requirements are also considered during the evaluations. The results show that the way of the economizer dampers been controlled has a significant effect on fan performance and its energy use. The proposed strategy if properly implemented can provide fan energy saving in the range of 5–30%, depending mainly on the number of hours when the system operates in the free cooling mode, damper characteristics, and minimum outdoor air.

Nabil Nassif

2010-01-01T23:59:59.000Z

165

Gas-dynamic characteristics of a noise and heat insulating jacket on a gas turbine in a gas pumping plant on emergency disconnection of the cooling fans  

Science Journals Connector (OSTI)

The paper discusses the operation of a gas turbine plant (GTP) when the fans in ... NHJ by a fan. The operation of gas-pumping plant involves working with brief (10 ... describing the motion of an ideal thermally...

P. V. Trusov; D. A. Charntsev; I. R. Kats…

2008-09-01T23:59:59.000Z

166

Impacts of Static Pressure Reset on VAV System Air Leakage, Fan Power and Thermal Energy - Part 2: Case Demonstration for a Typical Climate System  

E-Print Network (OSTI)

In Part 1 of this paper, the theoretical models, integrating the fan airflow, fan head, air leakage factors, are developed to analyze the impacts of the static pressure reset on both pressure dependent and pressure independent terminal boxes...

Liu, M.; Zheng, K.; Wu, L.; Wang, Z.; Johnson, C.

2007-01-01T23:59:59.000Z

167

CleanRooms Magazine, November 2006 Development of a Fan-Filter Unit Test Standard, Laboratory  

E-Print Network (OSTI)

LBNL-61750 CleanRooms Magazine, November 2006 Development of a Fan-Filter Unit Test Standard and provide particle filtration control for clean environments. Much of the energy in cleanrooms (and-filter units that are typically located in the ceiling (25-100% coverage) of cleanroom controlled environments

168

Quantitative characteristics of sinuous distributary channels on the Amazon Deep-Sea Fan  

Science Journals Connector (OSTI)

...hydrodynamic parameters somewhat similar to those encountered in sub- aerial rivers (Damuth and others, 1983a, and unpub. data). Clearly...submarine fan channel/levee systems: Geo-Marine Letters. Fukushima, Y., Parker, G and Pantin, H. M., 1985, Prediction...

169

Challenges and Prospects of Nanopillar-Based Solar Cells Zhiyong Fan1,2,3  

E-Print Network (OSTI)

], and solar energy into electricity [20 33]. In this review article, we summarize the continuous progress own advantages and disadvantages. The device structures utilizing radial NPL junctions (i.e., coreChallenges and Prospects of Nanopillar-Based Solar Cells Zhiyong Fan1,2,3 , Daniel J. Ruebusch1

Javey, Ali

170

Laboratory Evaluation of Fan-filter Units' Aerodynamic and Energy Performance  

E-Print Network (OSTI)

Laboratory Evaluation of Fan-filter Units' Aerodynamic and Energy Performance Tengfang Xu, Lawrence The paper discusses the benefits of having a consistent testing method to characterize aerodynamic applications. Optimizing aerodynamic performance in air recirculation systems appears to be one of useful

171

Performance characteristics of a low pressure cyclone for axial-flow fan exhausts  

E-Print Network (OSTI)

pneumatically convey lint fiber to the first-stage lint cleaner. typically, covered condenser drums with fine mesh screens are the abatement devices used on a)axial-flow fan exhausts. A new ID2D Low Pressure Cyclone (LPC) was developed that could be used...

Simpson, Shay Lynn

2012-06-07T23:59:59.000Z

172

NATURAL HAZARDS ON ALLUVIAL FANS: THE VENEZUELA DEBRIS FLOW AND FLASH FLOOD DISASTER  

E-Print Network (OSTI)

NATURAL HAZARDS ON ALLUVIAL FANS: THE VENEZUELA DEBRIS FLOW AND FLASH FLOOD DISASTER In December Venezuela. Rainfall on December 2-3 totaled 200 millimeters (8 inches) and was followed by a major storm, Denver, Colorado, Naples, Italy, and Vargas, Venezuela. In time scales spanning thousands of years

Eaton, L. Scott

173

Sentiment-Oriented Contextual Advertising Teng-Kai Fan Chia-Hui Chang  

E-Print Network (OSTI)

Sentiment-Oriented Contextual Advertising Teng-Kai Fan Chia-Hui Chang Department of Computer 320, R.O.C. tengkaifan@gmail.com chia@csie.ncu.edu.tw Abstract Web advertising (Online advertising), a form of advertising that uses the World Wide Webtoattractcustomers

Chang, Chia-Hui

174

Sentiment-Oriented Contextual Advertising Teng-Kai Fan, Chia-Hui Chang  

E-Print Network (OSTI)

Sentiment-Oriented Contextual Advertising Teng-Kai Fan, Chia-Hui Chang Department of Computer@gmail.com, chia@csie.ncu.edu.tw Abstract. Web advertising (Online advertising), a form of advertising that uses. This paper addresses the mechanism of Content- Oriented advertising (Contextual advertising), which refers

Chang, Chia-Hui

175

QPIAD: Query Processing over Incomplete Autonomous Databases Hemal Khatri Jianchun Fan Yi Chen Subbarao Kambhampati  

E-Print Network (OSTI)

QPIAD: Query Processing over Incomplete Autonomous Databases Hemal Khatri Jianchun Fan Yi Chen.khatri,jcf,yi,rao}@asu.edu Abstract Incompleteness due to missing attribute values (aka "null values") is very common in autonomous missing attributes, even if they wind up being rel- evant to a user query. Ideally we would like

Chen, Yi

176

Comparison of test particle acceleration in torsional spine and fan reconnection regimes  

SciTech Connect

Magnetic reconnection is a common phenomenon taking place in astrophysical and space plasmas, especially in solar flares which are rich sources of highly energetic particles. Torsional spine and fan reconnections are important mechanisms proposed for steady-state three-dimensional null-point reconnection. By using the magnetic and electric fields for these regimes, we numerically investigate the features of test particle acceleration in both regimes with input parameters for the solar corona. By comparison, torsional spine reconnection is found to be more efficient than torsional fan reconnection in an acceleration of a proton to a high kinetic energy. A proton can gain as high as 100?MeV of relativistic kinetic energy within only a few milliseconds. Moreover, in torsional spine reconnection, an accelerated particle can escape either along the spine axis or on the fan plane depending on its injection position. However, in torsional fan reconnection, the particle is only allowed to accelerate along the spine axis. In addition, in both regimes, the particle's trajectory and final kinetic energy depend on the injection position but adopting either spatially uniform or non-uniform localized plasma resistivity does not much influence the features of trajectory.

Hosseinpour, M., E-mail: hosseinpour@tabrizu.ac.ir; Mehdizade, M.; Mohammadi, M. A. [Plasma Physics Department, University of Tabriz, Tabriz (Iran, Islamic Republic of)

2014-10-15T23:59:59.000Z

177

Power Aware Page Allocation Alvin R. Lebeck, Xiaobo Fan, Heng Zeng, Carla Ellis  

E-Print Network (OSTI)

Power Aware Page Allocation Alvin R. Lebeck, Xiaobo Fan, Heng Zeng, Carla Ellis Department of Computer Science Duke University alvy@cs.duke.edu http://www.cs.duke.edu/~alvy Milly Watt #12;Power Aware Page Allocation 2© Alvin R. Lebeck, 2000 Power Aware System Design ?Traditional system design targets

Ellis, Carla

178

Effect on energy use and greenhouse microclimate through fan motor control by variable frequency drives  

Science Journals Connector (OSTI)

A comparison was conducted between ON–OFF and variable frequency drive (VFD) systems to control greenhouse ventilation fans. The study aimed to determine the effect of each system on the energy consumption and resulting greenhouse microclimate. The experiments were conducted in a commercial size greenhouse in which pepper was grown. To check the performance of the fan that was controlled by a VFD system, it was installed in a test facility and operated under several rotation speeds. At each speed of rotation, the static pressure on the fan was changed and parameters, such as electricity consumption and air flow rate, were measured. Reducing the fan speed with the VFD system resulted in reductions in the air flow rate through the greenhouse and energy consumption, the latter being much more significant. The study showed that VFD control can reduce electricity consumption compared with ON–OFF operation by an amount that depends on the weather. In the present study, the average energy consumption with the VFD control system over a period of one month, was about 0.64 of that with an ON–OFF system. The average greenhouse daily air temperatures and humidity ratios obtained with each control system between 0700 and 1800 were nearly equal during that month. The results obtained in the greenhouse further show that the VFD system has a greater potential than the ON–OFF to reduce the range of amplitude variations in the air temperature and humidity ratio within the greenhouse.

Meir Teitel; Yun Zhao; Moti Barak; Eli Bar-lev; David Shmuel

2004-01-01T23:59:59.000Z

179

Single Molecule Electrochemistry Fu-Ren F. Fan, Juhyoun Kwak, and Allen J. Bard*,  

E-Print Network (OSTI)

Single Molecule Electrochemistry Fu-Ren F. Fan, Juhyoun Kwak, and Allen J. Bard*, Contribution from here electrochemical studies at the level of single molecules and small numbers of molecules. The detection of single molecules, their characterization, and their chemical and physical manipulation have

Kwak, Juhyoun

180

Energy Conservation Program for Consumer Products: Test Procedures for Residential Furnaces Fans; Correction  

Energy.gov (U.S. Department of Energy (DOE))

On January 3, 2014 the U.S. Department of Energy (DOE) published a final rule in the Federal Register that established the test procedure for residential furnace fans. Due to drafting errors, that document inadvertently removed necessary incorporation by reference material in the Code of Federal Regulations (CFR). This final rule rectifies this error by once again adding the removed material.

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

L1 Adaptive Control of Hysteresis in Smart Materials Xiang Fan and Ralph C. Smith  

E-Print Network (OSTI)

L1 Adaptive Control of Hysteresis in Smart Materials Xiang Fan and Ralph C. Smith Center 27695 ABSTRACT Smart materials display coupling between electrical, magnetic, thermal and elastic inherent to smart materials presents a challenge in control of these actuators/sensors. Inverse

182

Development of models for series and parallel fan variable air volume terminal units  

E-Print Network (OSTI)

for the series and parallel units, with coefficients varying by size and manufacturer. Statistical modeling utilized SAS software (2002). Fan power and airflow data were collected at downstream static pressures over a range from 0.1 to 0.5 in. w.g. (25 to 125 Pa...

Furr, James C., Jr

2007-09-17T23:59:59.000Z

183

REQUEST BY GENERAL ELECTRIC CORPORATE RESEARCH AND DEVELOPMENT (GE) FOR AN ADVANCE WAIVER OF DOMESTIC AND  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 Statement of Considerations REQUEST BY GENERAL ELECTRIC CORPORATE RESEARCH AND DEVELOPMENT (GE) FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS TO INVENTIONS MADE UNDER CONTRACT NO. DE-FC26-00NT40993 ENTITLED "VARIABLE SPEED INTEGRATED INTELLIGENT BLOWER FOR HIGH EFFICIENCY HEATING VENTILATION AND AIR CONDITIONING"; W(A)-01-019, CH1066. GE has requested an advance waiver of domestic and foreign patent rights to inventions its employees may conceive or first actually reduce to practice in the performance of Contract No. DE-FC26-00NT40993. As brought out in the attached waiver petition, the scope of work includes the development and marketing of an Electronically Cormutated Motor (ECM) and fan combination. The combination utilizes a common rotating shaft and integral cooling and advanced blower fan

184

Meals included in Conference Registrations  

E-Print Network (OSTI)

Meals included in Conference Registrations Meals included as part of the cost of a conference the most reasonable rates are obtained. Deluxe hotels and motels should be avoided. GSA rates have been for Georgia high cost areas. 75% of these amounts would be $21 for non- high cost areas and $27 for high cost

Arnold, Jonathan

185

Jasper: the Art of Exploration in Greedy Best First Search Fan Xie and Martin Mller and Robert Holte  

E-Print Network (OSTI)

Jasper: the Art of Exploration in Greedy Best First Search Fan Xie and Martin Müller and Robert restarts and randomization for better quality search. Jasper is a satisficing planner that builds on LAMA

Müller, Martin

186

Finding the largest low-rank clusters with Ky Fan 2-k-norm and l1-norm  

E-Print Network (OSTI)

Mar 24, 2014 ... Abstract: We propose a convex optimization formulation with the Ky Fan 2-k-norm and l1-norm to fi nd k largest approximately rank-one ...

Xuan Vinh Doan

2014-03-24T23:59:59.000Z

187

2014-09-19 Issuance: Energy Conservation Program for Consumer Products: Test Procedure for Ceiling Fans;NOPR  

Energy.gov (U.S. Department of Energy (DOE))

This document is a pre-publication Federal Register notice of proposed rulemaking regarding Energy Conservation Program for Consumer Products: Test Procedure for Ceiling Fans, as issued by the Deputy Assistant Secretary for Energy Efficiency on September 19, 2014.

188

Optimized Fan Control In Variable Air Volume HVAC Systems Using Static Pressure Resets: Strategy Selection and Savings Analysis  

E-Print Network (OSTI)

The potential of static pressure reset (SPR) control to save fan energy in variable air volume HVAC systems has been well documented. Current research has focused on the creation of reset strategies depending on specific system features...

Kimla, John

2010-07-14T23:59:59.000Z

189

Science on Saturday attracts science fans of all ages | Princeton Plasma  

NLE Websites -- All DOE Office Websites (Extended Search)

Science on Saturday attracts science fans of all ages Science on Saturday attracts science fans of all ages By Jeanne Jackson DeVoe January 28, 2013 Tweet Widget Facebook Like Google Plus One Joshua E. G. Peek, a Hubble Fellow at Columbia University's Department of Astronomy and son of PPPL physicist and former director Robert Goldston, discusses "Outer Space!" (Photo by Elle Starkman/PPPL Office of Communications) Joshua E. G. Peek, a Hubble Fellow at Columbia University's Department of Astronomy and son of PPPL physicist and former director Robert Goldston, discusses "Outer Space!" Gallery: High school senior Varuni Bewtra comes to the lectures to learn about possible careers in science. (Photo by Photo by Jeanne Jackson DeVoe/PPPL Office of Communications) High school senior Varuni Bewtra comes to the lectures to learn about

190

Economic Recovery of Oil Trapped at Fan Margins Using High Angle Wells and Multiple Hydraulic Fractures  

SciTech Connect

The distal fan margin in the northeast portion of the Yowlumne field contains significant reserves but is not economical to develop using vertical wells. Numerous interbedded shales and deteriorating rock properties limit producibility. In addition, extreme depths (13,000 ft) present a challenging environment for hydraulic fracturing and artificial lift. Lastly, a mature waterflood increases risk because of the uncertainty with size and location of flood fronts. This project attempts to demonstrate the effectiveness of exploiting the distal fan margin of this slope-basin clastic reservoir through the use of a high-angle well completed with multiple hydraulic-fracture treatments. The combination of a high-angle (or horizontal) well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore. The equivalent production rate and reserves of three vertical wells are anticipated at one-half to two-thirds the cost.

Mike L. Laue

1997-05-30T23:59:59.000Z

191

Continuous Commissioning® of a Single Fan Dual Duct System in an Office Building  

E-Print Network (OSTI)

Continuous Commissioning ® of a Single Fan Dual Duct System in an Office Building D. Dong M. Liu, Ph.D., P.E Jinrong Wang, P.E Energy Systems Laboratory Energy Systems Laboratory... of AHU control sequences can significantly improve building comfort and reduce HVAC energy cost. REFERENCES 1. Liu, M., Y. Zhu, and D. E. Claridge, “Use of EMCS Recorded Data to Identify Potential Savings Due to Improved HVAC Operations...

Dong, D.; Liu, M.

2005-01-01T23:59:59.000Z

192

A study of the design procedure and the performance characteristics of axial exhaust fans  

E-Print Network (OSTI)

of the requirements for the degxee of %%STER OF SCIENCE IN NECHM3EEL ENGINEERIMG August, 19/9 COBTEEITS Intoroduct'o9. on o e e ~ ~ ~ ~ ~ e ~ e ~ ~ ~ ~ ~ 1 Ia Derivation of Fan Lass ~ ~ ~ ~ ~ ~ ~ ~ ~ 2 XI Description of Test Apparatus . . . . . ~. . . 7 XII... by s reversible electric motor operated by a reversing motor control switch, which is conveniently located near the Inclined manometer connected, to the pitot tube which measures the static pressure inside the plenum chamber. The followiug equipment composes...

Barker, Gilbert Hamilton

2012-06-07T23:59:59.000Z

193

Demonstrating Energy Conversion with Piezoelectric Crystals and a Paddle Fan  

Science Journals Connector (OSTI)

A simple energy conversion system—particularly the conversion of mechanical energy into electrical energy by using shaker flashlights—has recently been presented. 1 This system uses hand generators consisting of a magnet in a tube with a coil wrapped around it and acts as an ac source when the magnet passes back and forth through the coil. Additionally this system includes an LED a capacitor a switch and a full-wave bridge rectifier. We were inspired by this work to design a simpler demonstrator made for teaching energy conversion concepts to science students using piezoelectric material. 2 3

Prissana Rakbamrung; Chatchai Putson

2014-01-01T23:59:59.000Z

194

Sponsorship includes: Agriculture in the  

E-Print Network (OSTI)

Sponsorship includes: · Agriculture in the Classroom · Douglas County Farm Bureau · Gifford Farm · University of Nebraska Agricultural Research and Development Center · University of Nebraska- Lincoln Awareness Coalition is to help youth, primarily from urban communities, become aware of agriculture

Nebraska-Lincoln, University of

195

Appendix F Cultural Resources, Including  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Appendix F Appendix F Cultural Resources, Including Section 106 Consultation STATE OF CALIFORNIA - THE RESOURCES AGENCY EDMUND G. BROWN, JR., Governor OFFICE OF HISTORIC PRESERVATION DEPARTMENT OF PARKS AND RECREATION 1725 23 rd Street, Suite 100 SACRAMENTO, CA 95816-7100 (916) 445-7000 Fax: (916) 445-7053 calshpo@parks.ca.gov www.ohp.parks.ca.gov June 14, 2011 Reply in Reference To: DOE110407A Angela Colamaria Loan Programs Office Environmental Compliance Division Department of Energy 1000 Independence Ave SW, LP-10 Washington, DC 20585 Re: Topaz Solar Farm, San Luis Obispo County, California Dear Ms. Colamaria: Thank you for seeking my consultation regarding the above noted undertaking. Pursuant to 36 CFR Part 800 (as amended 8-05-04) regulations implementing Section

196

Countries Gasoline Prices Including Taxes  

Gasoline and Diesel Fuel Update (EIA)

Countries (U.S. dollars per gallon, including taxes) Countries (U.S. dollars per gallon, including taxes) Date Belgium France Germany Italy Netherlands UK US 01/13/14 7.83 7.76 7.90 8.91 8.76 8.11 3.68 01/06/14 8.00 7.78 7.94 8.92 8.74 8.09 3.69 12/30/13 NA NA NA NA NA NA 3.68 12/23/13 NA NA NA NA NA NA 3.63 12/16/13 7.86 7.79 8.05 9.00 8.78 8.08 3.61 12/9/13 7.95 7.81 8.14 8.99 8.80 8.12 3.63 12/2/13 7.91 7.68 8.07 8.85 8.68 8.08 3.64 11/25/13 7.69 7.61 8.07 8.77 8.63 7.97 3.65 11/18/13 7.99 7.54 8.00 8.70 8.57 7.92 3.57 11/11/13 7.63 7.44 7.79 8.63 8.46 7.85 3.55 11/4/13 7.70 7.51 7.98 8.70 8.59 7.86 3.61 10/28/13 8.02 7.74 8.08 8.96 8.79 8.04 3.64 10/21/13 7.91 7.71 8.11 8.94 8.80 8.05 3.70 10/14/13 7.88 7.62 8.05 8.87 8.74 7.97 3.69

197

Building America Case Study: Evaluating Through-Wall Air Transfer Fans, Pittsburgh, Pennsylvania (Fact Sheet)  

SciTech Connect

In this project, Building America team IBACOS performed field testing in a new construction unoccupied test house in Pittsburgh, Pennsylvania to evaluate heating, ventilating, and air conditioning (HVAC) distribution systems during heating, cooling, and midseason conditions. Four air-based HVAC distribution systems were assessed:-a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, a system with transfer fans to the bedrooms, and a system with no ductwork to the bedrooms. The relative ability of each system was considered with respect to relevant Air Conditioning Contractors of America and ASHRAE standards for house temperature uniformity and stability, respectively.

Not Available

2014-10-01T23:59:59.000Z

198

2014-10-27 Issuance: Test Procedure for Ceiling Fan Light Kits; Notice of Proposed Rulemaking  

Energy.gov (U.S. Department of Energy (DOE))

This document is a pre-publication Federal Register notice of proposed rulemaking regarding test procedures for ceiling fan light kits, as issued by the Deputy Assistant Secretary for Energy Efficiency on October 27, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

199

2014-06-25 Issuance: Energy Conservation Standards for Residential Furnace Fans; Final Rule  

Energy.gov (U.S. Department of Energy (DOE))

This document is a pre-publication Federal Register final rule regarding energy conservation standards for furnace fans, as issued by the Assistant Secretary for Energy Efficiency and Renewable Energy on June 25, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

200

Measurable energy savings of installing variable frequency drives for cooling towers’ fans, compared to dual speed motors  

Science Journals Connector (OSTI)

Abstract In recent years the building management system (BMS) controllers have been used to control the operation of heating, ventilation, and air conditioning system in addition to lighting and some electrical equipment in order to save energy. In the water cooled system, the BMS controls the operation process of the cooling towers (CTs) fans of dual speed motors to maintain a constant leaving water temperature for different cooling loads and different ambient wet bulb temperature (WBT). This paper presents the effect of installing variable frequency drives (VFDs) for \\{CTs\\} fans in Kuwait during summer season on energy savings compared to dual speed control. The results have shown that with VFD mode, the reduction in water consumption was over 13% compared to the commonly used dual speed mode. More importantly, the combined power for the chillers and the \\{CTs\\} fans for the same amount of cooling produced were reduced by 5.8% in the VFD mode.

E. Al-Bassam; R. Alasseri

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Duplex-like structures in submarine fan channels, Ouachita Mountains, Arkansas  

SciTech Connect

Submarine fan channel sequences of the Jackfork Formation (Lower Pennsylvanian) at DeGray Dam section in the Ouachita Mountains, Arkansas, contain discrete units (10-75 cm thick) with moderately dipping (25/sup 0/-40/sup 0/), sigmoidal imbricate slices. Adjacent units with opposing imbricate slices are common. The sigmoidal structures are similar in geometry to a tectonic feature known as a duplex. A tectonic origin of sigmoidal structures, however, seems unlikely because opposing directions of imbrication in adjacent units would require an unrealistic tectonic movement history for the area. The authors propose that the Jackfork sigmoidal structures were formed by a process kinematically similar to that responsible for generating duplex structures. Unlike tectonic duplexes, however, the sigmoidal structures were formed by soft-sediment deformation of sand and mud layers as high-energy sediment gravity flows glided over these layers. Sediment gravity flows, responsible for forming the sigmoidal deformation, were probably generated by slumping of adjacent channel walls. Dip direction of sigmoidal slices is perpendicular to channel axes. Thus, recognition of sigmoidal deformation structures may be useful in inferring the trend of channels in ancient submarine fan complexes.

Shanmugam, G.; Moiola, R.J.; Sales, J.K.

1988-03-01T23:59:59.000Z

202

In situ measurement of noise of induced?draft fans in a power plant stack  

Science Journals Connector (OSTI)

Induced?draft fans are commonly the most annoying sources of community noise associated with fossil?fuel power plants. The low frequency tones generated by the fans are usually radiated to the community from the top of a tall stack. Measurements of the tone levels in the community are hampered by environmental effects such as strong wind and thermal gradients. Measurements within the flue gas ducting are therefore desirable. However the flue gas environment is hostile to microphones due to elevated temperatures particulates and the presence of gas flow. The interpretation of in?duct data is complicated by the possible effects of standing waves and cross modes in the duct and turbulence generated noise. The recent installation of a dissipative?reactive muffler in a coal?fired plant offered the opportunity to (1) investigate techniques for measuring noise in stacks (2) evaluate the performance of the muffler under operating conditions and (3) check the in?stack results against limited farfield data. Good agreement was obtained between reductions in tone levels measured in the stack and in the community.

A. R. Thompson; M. A. Theobald; Alex Simich

1979-01-01T23:59:59.000Z

203

Toward Green Systems for Cleanrooms: Energy Efficient Fan-filter Units Ming-Shan Jeng, Industrial Technology Research Institute, msjeng@itri.org.tw  

E-Print Network (OSTI)

Toward Green Systems for Cleanrooms: Energy Efficient Fan-filter Units Ming-Shan Jeng, Industrial results of laboratory-measured performance of fan-filter units (FFUs) used for cleanrooms. A total for many cleanroom applications. ) 2004 Semiconductor Equipment and Materials International Keywords

204

y 1000km of high resolution sleeve-gun array transects on the North Sza Fan, located at tbe mouth orwegian Channel, reveal three domina tyles of sedimentation within a thick  

E-Print Network (OSTI)

y 1000km of high resolution sleeve-gun array transects on the North Sza Fan, located at tbe mouth the lution data across the fan other than conventional he seismic source was an arra nstruments 40 in3 sleeve-guns along the fan axis. These data were shot with the same sleeve-gun array but recorded digitally via a 144

205

Study of the Effects of Ambient Conditions Upon the Performance of Fan Powered, Infrared Natural Gas Burners  

SciTech Connect

The objective of this investigation was to characterize the operation of a fan-powered, infrared burner (IR burner) at various gas compositions and ambient conditions, develop numerical model to simulate the burner performances, and provide design guidelines for appliances containing PIR burners for satisfactory performance.

Clark Atlanta University

2002-12-02T23:59:59.000Z

206

Stimulated Emission from a Single Excited Atom in a Waveguide Eden Rephaeli1,* and Shanhui Fan2,  

E-Print Network (OSTI)

Stimulated Emission from a Single Excited Atom in a Waveguide Eden Rephaeli1,* and Shanhui Fan2, 1; published 3 April 2012) We study stimulated emission from an excited two-level atom coupled to a waveguide by the atom, plays a very important role in stimulated emission. Additionally, the temporal duration

Fan, Shanhui

207

New Energy Efficiency Standards for Furnace Fans to Reduce Carbon Pollution, Help Americans Save on Energy Bills  

Energy.gov (U.S. Department of Energy (DOE))

WASHINGTON – As part of President Obama’s Climate Action Plan, the Energy Department today announced a new energy efficiency standard for furnace fans, the latest of eight finalized standards and nine proposed standards issued since the Climate Action Plan was announced last year.

208

Towards a syntactic signature for domain models: proposed descriptive metrics for visualizing the entity fan-out frequency distribution  

Science Journals Connector (OSTI)

The main objective of this paper is to find a minimal set of measures that allow the immediate, intuitive characterisation and visualization of the syntactic structure of models covering a particular application domain. The measures are validated ... Keywords: case measures, enterprise models, entity fan-out distribution, metrics, model analysis, model complexity, modelling

Jean-Paul van Belle

2002-09-01T23:59:59.000Z

209

Permanent Magnet Assisted Synchronous Reluctance Machine (PMa-SynRM) Design and Performance Analysis for Fan and Pump Applications  

E-Print Network (OSTI)

...................................................................................................... 47 Fig 3-12: Reluctance torque generated by each rotor at rated current and maximum torque angle. ................................................................................... 48 xi Page Fig 3-13: FEA analysis field output on the PMa... PERMANENT MAGNET ASSISTED SYNCHRONOUS RELUCTANCE MACHINE (PMA-SYNRM) DESIGN AND PERFORMANCE ANALYSIS FOR FAN AND PUMP APPLICATIONS A Dissertation by ROBERT VARTANIAN Submitted to the Office of Graduate and Professional Studies...

Vartanian, Robert

2014-08-13T23:59:59.000Z

210

Gas-surface scattering with multiple collisions in the physisorption potential well Guoqing Fan and J. R. Manson  

E-Print Network (OSTI)

Gas-surface scattering with multiple collisions in the physisorption potential well Guoqing Fan The problem of gas-surface collisions is developed in terms of a theoretical formalism that allows calcula gas distributions are considered, a monoenergetic incident beam and an equilibrium gas appropriate

Manson, Joseph R.

211

Inferring Air Pollution by Sniffing Social Media Shike Mei, Han Li, Jing Fan, Xiaojin Zhu and Charles R. Dyer  

E-Print Network (OSTI)

Inferring Air Pollution by Sniffing Social Media Shike Mei, Han Li, Jing Fan, Xiaojin Zhu issue of air pollution in China and elsewhere in the world is to monitor it. While more physical prediction performance of our approach. I. INTRODUCTION Air pollution is a significant issue in China

Dyer, Charles R.

212

Near-infrared double negative metamaterials Shuang Zhang, Wenjun Fan, K. J. Malloy and S. R. J. Brueck  

E-Print Network (OSTI)

Near-infrared double negative metamaterials Shuang Zhang, Wenjun Fan, K. J. Malloy and S. R. J and negative over an overlapping near-infrared wavelength range resulting in a low loss negative. Brueck, "Demonstration of Near-Infrared Negative-Index Materials," Postdeadline Paper at OSA Topical

New Mexico, University of

213

Influence of Tip Clearance and Inlet Flow Distortion on Ducted Fan Performance in VTOL UAVs Graduate Research Assistant  

E-Print Network (OSTI)

(Pa) CpTotal = Total pressure coefficient = Rotational speed (radian/sec) r = Radial distance measured military tasks, they can continuously transmit surveillance data and act as a relay station. Although to study the flow characteristics of ducted fans. Abrego and Bulaga [1] performed wind tunnel tests

Camci, Cengiz

214

Performance Optimization of a Fan System- Overcoming Impacts of Modified Design Criteria Due to Regulatory Requirements and Changed Operating Conditions  

E-Print Network (OSTI)

that was applied to address fan inefficiency. Energy savings from optimizing the system are estimated to be 338 kW, nearly half of the original measured input power of 678 kW. The project is currently being implemented and will have a payback period of less than 8...

Wroblewski, R. G.; Preis, F.; Smith, R.

215

Development of a Fan-Filter Unit Test Standard, LaboratoryValidations, and its Applications across Industries  

SciTech Connect

Lawrence Berkeley National Laboratory (LBNL) is now finalizing the Phase 2 Research and Demonstration Project on characterizing 2-foot x 4-foot (61-cm x 122-cm) fan-filter units in the market using the first-ever standard laboratory test method developed at LBNL.[1][2][3] Fan-filter units deliver re-circulated air and provide particle filtration control for clean environments. Much of the energy in cleanrooms (and minienvironments) is consumed by 2-foot x 4-foot (61-cm x 122-cm) or 4-foot x 4-foot (122-cm x 122-cm) fan-filter units that are typically located in the ceiling (25-100% coverage) of cleanroom controlled environments. Thanks to funding support by the California Energy Commission's Industrial Program of the Public Interest Energy Research (PIER) Program, and significant participation from manufacturers and users of fan-filter units from around the world, LBNL has developed and performed a series of standard laboratory tests and reporting on a variety of 2-foot x 4-foot (61-cm x 122-cm) fan-filter units (FFUs). Standard laboratory testing reports have been completed and reported back to anonymous individual participants in this project. To date, such reports on standard testing of FFU performance have provided rigorous and useful data for suppliers and end users to better understand, and more importantly, to quantitatively characterize performance of FFU products under a variety of operating conditions.[1] In the course of the project, the standard laboratory method previously developed at LBNL has been under continuous evaluation and update.[2][3] Based upon the updated standard, it becomes feasible for users and suppliers to characterize and evaluate energy performance of FFUs in a consistent way.

Xu, Tengfang

2006-10-20T23:59:59.000Z

216

Energy saving in agricultural buildings through fan motor control by variable frequency drives  

Science Journals Connector (OSTI)

A comparison was conducted between ON–OFF and variable frequency drive (VFD) systems to control ventilation fans of greenhouses and poultry houses. The study aimed to determine the effect of each system on the energy consumption and resulting microclimate within the houses. The experiments were carried out in a commercial-size greenhouse in which pepper was grown and in commercial poultry houses. Reducing the fan speed with the VFD system resulted in reductions in the airflow rate through the houses and energy consumption, the latter being much more significant. The study showed that VFD control can reduce electricity consumption compared with ON–OFF operation. In the present study, the average energy consumption with the VFD control system was about 0.64 and 0.75 of that with an ON–OFF system in the greenhouse and poultry houses, respectively. The average greenhouse daily air temperatures and humidity ratios obtained with each control system between 07:00 and 18:00 were nearly equal. The results obtained in the greenhouse further showed that the VFD system has a greater potential than the ON–OFF, to reduce the range of amplitude variations in the air temperature and humidity ratio within the greenhouse. The average air temperatures over day and night, in the poultry houses, with each control system were nearly equal. The relative humidity, however, was slightly lower with VFD than with ON–OFF. Reductions in the range of amplitude variations of the air temperature and humidity were also observed in the poultry houses.

Meir Teitel; Asher Levi; Yun Zhao; Moti Barak; Eli Bar-lev; David Shmuel

2008-01-01T23:59:59.000Z

217

Evaluation of the Repeatability of the Delta Q Duct Leakage Testing TechniqueIncluding Investigation of Robust Analysis Techniques and Estimates of Weather Induced Uncertainty  

SciTech Connect

The DeltaQ test is a method of estimating the air leakage from forced air duct systems. Developed primarily for residential and small commercial applications it uses the changes in blower door test results due to forced air system operation. Previous studies established the principles behind DeltaQ testing, but raised issues of precision of the test, particularly for leaky homes on windy days. Details of the measurement technique are available in an ASTM Standard (ASTM E1554-2007). In order to ease adoption of the test method, this study answers questions regarding the uncertainty due to changing weather during the test (particularly changes in wind speed) and the applicability to low leakage systems. The first question arises because the building envelope air flows and pressures used in the DeltaQ test are influenced by weather induced pressures. Variability in wind induced pressures rather than temperature difference induced pressures dominates this effect because the wind pressures change rapidly over the time period of a test. The second question needs to answered so that DeltaQ testing can be used in programs requiring or giving credit for tight ducts (e.g., California's Building Energy Code (CEC 2005)). DeltaQ modeling biases have been previously investigated in laboratory studies where there was no weather induced changes in envelope flows and pressures. Laboratory work by Andrews (2002) and Walker et al. (2004) found biases of about 0.5% of forced air system blower flow and individual test uncertainty of about 2% of forced air system blower flow. The laboratory tests were repeated by Walker and Dickerhoff (2006 and 2008) using a new ramping technique that continuously varied envelope pressures and air flows rather than taking data at pre-selected pressure stations (as used in ASTM E1554-2003 and other previous studies). The biases and individual test uncertainties for ramping were found to be very close (less than 0.5% of air handler flow) to those found in for the pressure station approach. Walker and Dickerhoff also included estimates of DeltaQ test repeatability based on the results of field tests where two houses were tested multiple times. The two houses were quite leaky (20-25 Air Changes per Hour at 50Pa (0.2 in. water) (ACH50)) and were located in the San Francisco Bay area. One house was tested on a calm day and the other on a very windy day. Results were also presented for two additional houses that were tested by other researchers in Minneapolis, MN and Madison, WI, that had very tight envelopes (1.8 and 2.5 ACH50). These tight houses had internal duct systems and were tested without operating the central blower--sometimes referred to as control tests. The standard deviations between the multiple tests for all four houses were found to be about 1% of the envelope air flow at 50 Pa (0.2 in. water) (Q50) that led to the suggestion of this as a rule of thumb for estimating DeltaQ uncertainty. Because DeltaQ is based on measuring envelope air flows it makes sense for uncertainty to scale with envelope leakage. However, these tests were on a limited data set and one of the objectives of the current study is to increase the number of tested houses. This study focuses on answering two questions: (1) What is the uncertainty associated with changes in weather (primarily wind) conditions during DeltaQ testing? (2) How can these uncertainties be reduced? The first question is addressing issues of repeatability. To study this five houses were tested as many times as possible over a day. Weather data was recorded on-site--including the local windspeed. The result from these five houses were combined with the two Bay Area homes from the previous studies. The variability of the tests (represented by the standard deviation) is the repeatability of the test method for that house under the prevailing weather conditions. Because the testing was performed over a day a wide range of wind speeds was achieved following typical diurnal variations of low wind in the early morning and greatest winds in the late afternoon/early

Dickerhoff, Darryl; Walker, Iain

2008-08-01T23:59:59.000Z

218

2014-09-16 Issuance: Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans: Public Meeting and Availability of the Preliminary Technical Support Document  

Energy.gov (U.S. Department of Energy (DOE))

This document is a pre-publication Federal Register Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans: Public Meeting and Availability of the Preliminary Technical Support Document.

219

Impacts of Static Pressure Reset on VAV System Air Leakage, Fan Power and Thermal Energy - Part I: Theoretical Model and Simulation  

E-Print Network (OSTI)

As for a variable air volume (VAV) system, the air duct static pressure is a typical control variable maintained by modulating supply fan speed. The static pressure equals to the summation of the duct pressure loss downstream of the sensor...

Liu, M.; Feng, J.; Wang, Z.; Wu, L.; Zheng, K.; Pang, W.

2007-01-01T23:59:59.000Z

220

A prototype fan-beam optical CT scanner for 3D dosimetry  

SciTech Connect

Purpose: The objective of this work is to introduce a prototype fan-beam optical computed tomography scanner for three-dimensional (3D) radiation dosimetry. Methods: Two techniques of fan-beam creation were evaluated: a helium-neon laser (HeNe, {lambda} = 543 nm) with line-generating lens, and a laser diode module (LDM, {lambda} = 635 nm) with line-creating head module. Two physical collimator designs were assessed: a single-slot collimator and a multihole collimator. Optimal collimator depth was determined by observing the signal of a single photodiode with varying collimator depths. A method of extending the dynamic range of the system is presented. Two sample types were used for evaluations: nondosimetric absorbent solutions and irradiated polymer gel dosimeters, each housed in 1 liter cylindrical plastic flasks. Imaging protocol investigations were performed to address ring artefacts and image noise. Two image artefact removal techniques were performed in sinogram space. Collimator efficacy was evaluated by imaging highly opaque samples of scatter-based and absorption-based solutions. A noise-based flask registration technique was developed. Two protocols for gel manufacture were examined. Results: The LDM proved advantageous over the HeNe laser due to its reduced noise. Also, the LDM uses a wavelength more suitable for the PRESAGE{sup TM} dosimeter. Collimator depth of 1.5 cm was found to be an optimal balance between scatter rejection, signal strength, and manufacture ease. The multihole collimator is capable of maintaining accurate scatter-rejection to high levels of opacity with scatter-based solutions (T < 0.015%). Imaging protocol investigations support the need for preirradiation and postirradiation scanning to reduce reflection-based ring artefacts and to accommodate flask imperfections and gel inhomogeneities. Artefact removal techniques in sinogram space eliminate streaking artefacts and reduce ring artefacts of up to {approx}40% in magnitude. The flask registration technique was shown to achieve submillimetre and subdegree placement accuracy. Dosimetry protocol investigations emphasize the need to allow gel dosimeters to cool gradually and to be scanned while at room temperature. Preliminary tests show that considerable noise reduction can be achieved with sinogram filtering and by binning image pixels into more clinically relevant grid sizes. Conclusions: This paper describes a new optical CT scanner for 3D radiation dosimetry. Tests demonstrate that it is capable of imaging both absorption-based and scatter-based samples of high opacities. Imaging protocol and gel dosimeter manufacture techniques have been adapted to produce optimal reconstruction results. These optimal results will require suitable filtering and binning techniques for noise reduction purposes.

Campbell, Warren G.; Rudko, D. A.; Braam, Nicolas A.; Jirasek, Andrew [University of Victoria, Victoria, British Columbia V8P 5C2 (Canada); Wells, Derek M. [British Columbia Cancer Agency, Vancouver Island Centre, Victoria, British Columbia V8R 6V5 (Canada)

2013-06-15T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems  

SciTech Connect

An automated fault detection and diagnosis tool for HVAC systems is being developed, based on an integrated, life-cycle, approach to commissioning and performance monitoring. The tool uses component-level HVAC equipment models implemented in the SPARK equation-based simulation environment. The models are configured using design information and component manufacturers' data and then fine-tuned to match the actual performance of the equipment by using data measured during functional tests of the sort using in commissioning. This paper presents the results of field tests of mixing box and VAV fan system models in an experimental facility and a commercial office building. The models were found to be capable of representing the performance of correctly operating mixing box and VAV fan systems and detecting several types of incorrect operation.

Xu, Peng; Haves, Philip

2002-05-16T23:59:59.000Z

222

Field demonstration of optimized variable speed compressor and condenser fan control for commercial refrigeration systems. Final report  

SciTech Connect

The demonstration project discussed in this report consisted of two separate programs intended to examine methods of implementing variable-frequency drives (VFDs) to increase the efficiency of supermarket refrigeration racks. The first program examined the optimum control strategy for minimizing the power consumption of medium-temperature parallel compressor racks driven by VFDs. The second program, aimed at developing the optimum control strategy for variable-speed control of supermarket condenser fans.

NONE

1997-11-01T23:59:59.000Z

223

ECONOMIC RECOVERY OF OIL TRAPPED AT FAN MARGINS USING HIGH ANGLE WELLS AND MULTIPLE HYDRAULIC FRACTURES  

SciTech Connect

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a prograding turbidite complex through the use of hydraulically fractured horizontal or high-angle wells. The combination of a horizontal or high-angle well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore. A high-angle well will be drilled in the fan-margin portion of a slope-basin clastic reservoir and will be completed with multiple hydraulic-fracture treatments. Geologic modeling, reservoir characterization, and fine-grid reservoir simulation will be used to select the well location and orientation. Design parameters for the hydraulic-fracture treatments will be determined, in part, by fracturing an existing test well. Fracture azimuth will be predicted by passive seismic monitoring of a fracture-stimulation treatment in the test well using logging tools in an offset well.

Mike L. Laue

1998-11-06T23:59:59.000Z

224

Characterization of dynamic change of Fan-delta reservoir properties in water-drive development  

SciTech Connect

Fan-delta reservoir in Huzhuangji oil field of east China, is a typical highly heterogeneous reservoir. The oil field has been developed by water-drive for 10 years, but the oil recovery is less than 12%, and water cut is over 90%, resulting from high heterogeneity and serious dynamic change of reservoir properties. This paper aims at the study of dynamic change of reservoir properties in water-drive development. Through quantitative imaging analysis and mercury injection analysis of cores from inspection wells, the dynamic change of reservoir pore structure in water-drive development was studied. The results show that the {open_quotes}large pore channels{close_quotes} develop in distributary channel sandstone and become larger in water-drive development, resulting in more serious pore heterogeneity. Through reservoir sensitivity experiments, the rock-fluid reaction in water-drive development is studied. The results show the permeability of some distal bar sandstone and deserted channel sandstone becomes lower due to swelling of I/S clay minerals in pore throats. OD the other hand, the permeability of distributary channel and mouth bar sandstone become larger because the authigenic Koalinites in pore throats are flushed away with the increase of flow rate of injection water. Well-logging analysis of flooded reservoirs are used to study the dynamic change of reservoir properties in various flow units. The distribution of remaining oil is closely related to the types and distribution of flow units.

Wu Shenghe; Xiong Qihua; Liu Yuhong [Univ. of Petroleum Changping, Beijing (China)

1997-08-01T23:59:59.000Z

225

Study of the effects of ambient conditions upon the performance of fan powered, infrared, natural gas burners. Quarterly technical progress report, September 1--September 30, 1994  

SciTech Connect

The objective of this investigation is to characterize the operation of fan powered infrared(PIR) burner at various barometric pressures (operating altitude) and gas compositions and develop design guidelines for appliances containing PIR burners for satisfactory performance. In this program, the theoretical basis for the behavior of PIR burners will be established through analysis of the combustion, heat and mass transfer, and other related processes which determine the performance of PIR burners. Based on the results of this study, a first order model of the performance of the burner, including radiant output will be developed. The model will be applied to predict the performance of the selected burner and modified through comparison with test results. Concurrently, an experimental setup will be devised and built. This experimental rig will be a modified appliance, capable of measuring the heat and combustion product output, as well as providing a means by which the radiant heat output can be measured. The burner will be selected from an existing commercial appliance, a commercial deep fat fryer, and will be of a scale that will be compatible with the laboratory facilities in the Combustion Laboratory at Clark Atlanta University. Theoretical analysis and formulation of the PIR burner performance model has been started and the development of the test facilities and experimental setup has also been initiated. These are described.

Bai, T.

1994-10-01T23:59:59.000Z

226

ECONOMIC RECOVERY OF OIL TRAPPED AT FAN MARGINS USING HIGH ANGLE WELLS AND MULTIPLE HYDRAULIC FRACTURES  

SciTech Connect

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a prograding turbidite complex through the use of hydraulically fractured horizontal or high-angle wells. The combination of a horizontal or high-angle well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore. A high-angle well will be drilled in the fan-margin portion of a slope-basin clastic reservoir and will be completed with multiple hydraulic-fracture treatments. Geologic modeling, reservoir characterization, and fine-grid reservoir simulation will be used to select the well location and orientation. Design parameters for the hydraulic-fracture treatments will be determined, in part, by fracturing an existing test well. Fracture azimuth will be predicted by passive seismic monitoring of a fracture-stimulation treatment in the test well using logging tools in an offset well. The long radius, near horizontal well was drilled during the first quarter of 1996. Well conditions resulted in the 7 in. production liner sticking approximately 900 ft off bottom. Therefore, a 5 in. production liner was necessary to case this portion of the target formation. Swept-out sand intervals and a poor cement bond behind the 5 in. liner precluded two of the three originally planned hydraulic fracture treatments. As a result, all pay intervals behind the 5 in. liner were perforated and stimulated with a non-acid reactive fluid. Following a short production period, the remaining pay intervals in the well (behind the 7 in. liner) were perforated. The well was returned to production to observe production trends and pressure behavior and assess the need to stimulate the new perforations.

Mike L. Laue

2001-09-28T23:59:59.000Z

227

Uranium-series comminution ages of continental sediments: Case study of a Pleistocene alluvial fan  

SciTech Connect

Obtaining quantitative information about the timescales associated with sediment transport, storage, and deposition in continental settings is important but challenging. The uranium-series comminution age method potentially provides a universal approach for direct dating of Quaternary detrital sediments, and can also provide estimates of the sediment transport and storage timescales. (The word"comminution" means"to reduce to powder," reflecting the start of the comminution age clock as reduction of lithic parent material below a critical grain size threshold of ~;;50 mu m.) To test the comminution age method as a means to date continental sediments, we applied the method to drill-core samples of the glacially-derived Kings River Fan alluvial deposits in central California. Sediments from the 45 m core have independently-estimated depositional ages of up to ~;;800 ka, based on paleomagnetism and correlations to nearby dated sediments. We characterized sequentially-leached core samples (both bulk sediment and grain size separates) for U, Nd, and Sr isotopes, grain size, surface texture, and mineralogy. In accordance with the comminution age model, where 234U is partially lost from small sediment grains due to alpha recoil, we found that (234U/238U) activity ratios generally decrease with age, depth, and specific surface area, with depletions of up to 9percent relative to radioactive equilibrium. The resulting calculated comminution ages are reasonable, although they do not exactly match age estimates from previous studies and also depend on assumptions about 234U loss rates. The results indicate that the method may be a significant addition to the sparse set of available tools for dating detrital continental sediments, following further refinement. Improving the accuracy of the method requires more advanced models or measurements for both the recoil loss factor fa and weathering effects. We discuss several independent methods for obtaining fa on individual samples that may be useful for future studies.

Lee, Victoria E.; DePaolo, Donald J.; Christensen, John N.

2010-04-30T23:59:59.000Z

228

Issuance 2014-11-21:Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans: Availability of the Preliminary Technical Support Document, Notice of Comment Period Extension  

Energy.gov (U.S. Department of Energy (DOE))

Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans: Availability of the Preliminary Technical Support Document, Notice of Comment Period Extension

229

Net Taxable Gasoline Gallons (Including Aviation Gasoline)  

E-Print Network (OSTI)

Net Taxable Gasoline Gallons (Including Aviation Gasoline) Period 2000 2001 (2) 2002 2003 2004 "gross" to "net" , was deemed impractical. (5) This report replaces the Gross Taxable Gasoline Gallons (Including Aviation Gasoline) report which will not be produced after December 2002. (6) The November 2007

230

Gas storage materials, including hydrogen storage materials  

DOE Patents (OSTI)

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

2014-11-25T23:59:59.000Z

231

Residential Forced Air System Cabinet Leakage and Blower Performance  

E-Print Network (OSTI)

Plan goals of net zero energy new homes by 2020, as well as Plan goals of net zero energy new homes by 2020, as well as 

Walker, Iain S.

2010-01-01T23:59:59.000Z

232

Residential Forced Air System Cabinet Leakage and Blower Performance  

E-Print Network (OSTI)

Strategic Plan goals of net zero energy new homes by 2020, Strategic Plan goals of net zero energy new homes by 2020, 

Walker, Iain S.

2010-01-01T23:59:59.000Z

233

Furnace Blower Electricity: National and Regional Savings Potential  

E-Print Network (OSTI)

Currently, total electricity consumption of furnaces isthe total furnace electricity consumption and are primarilyto calculate the electricity consumption during cooling

Franco, Victor; Florida Solar Energy Center

2008-01-01T23:59:59.000Z

234

Residential Forced Air System Cabinet Leakage and Blower Performance  

E-Print Network (OSTI)

004?CMF.   California Energy  Commission, Sacramento, CA.  002?CMF.   California Energy Commission,  Sacramento, CA.  by the California Energy Commission    Public Interest 

Walker, Iain S.

2010-01-01T23:59:59.000Z

235

A MAXIMAL THEOREM FOR HOLOMORPHIC SEMIGROUPS by GORDON BLOWER  

E-Print Network (OSTI)

of New South Wales, NSW, 2052, Australia) [3 April 2004] Abstract Let X be a closed linear subspace of the Lebesgue space Lp (, µ) for some 1 invertible operator that is the generator norm f D(V ) = f Lp + V f Lp . For 0 power A such that D

Doust, Ian

236

A MAXIMAL THEOREM FOR HOLOMORPHIC SEMIGROUPS by GORDON BLOWER +  

E-Print Network (OSTI)

of New South Wales, NSW, 2052, Australia) [3 April 2004] Abstract Let X be a closed linear subspace of the Lebesgue space L p(# , µ) for some 1 invertible operator that is the generator a fractional power A # such that D(A # ) contains D(A), and A -# is bounded whenever A has bounded inverse; see

Doust, Ian

237

Intentionally Including - Engaging Minorities in Physics Careers |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers April 24, 2013 - 4:37pm Addthis Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the American Institute of Physics Resources. Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the

238

Scramjet including integrated inlet and combustor  

SciTech Connect

This patent describes a scramjet engine. It comprises: a first surface including an aft facing step; a cowl including: a leading edge and a trailing edge; an upper surface and a lower surface extending between the leading edge and the trailing edge; the cowl upper surface being spaced from and generally parallel to the first surface to define an integrated inlet-combustor therebetween having an inlet for receiving and channeling into the inlet-combustor supersonic inlet airflow; means for injecting fuel into the inlet-combustor at the step for mixing with the supersonic inlet airflow for generating supersonic combustion gases; and further including a spaced pari of sidewalls extending between the first surface to the cowl upper surface and wherein the integrated inlet-combustor is generally rectangular and defined by the sidewall pair, the first surface and the cowl upper surface.

Kutschenreuter, P.H. Jr.; Blanton, J.C.

1992-02-04T23:59:59.000Z

239

Transmission line including support means with barriers  

DOE Patents (OSTI)

A gas insulated transmission line includes an elongated outer sheath, a plurality of inner conductors disposed within and extending along the outer sheath, and an insulating gas which electrically insulates the inner conductors from the outer sheath. A support insulator insulatably supports the inner conductors within the outer sheath, with the support insulator comprising a main body portion including a plurality of legs extending to the outer sheath, and barrier portions which extend between the legs. The barrier portions have openings therein adjacent the main body portion through which the inner conductors extend.

Cookson, Alan H. (Pittsburgh, PA)

1982-01-01T23:59:59.000Z

240

Energy Consumption of Personal Computing Including Portable  

E-Print Network (OSTI)

Energy Consumption of Personal Computing Including Portable Communication Devices Pavel Somavat1 consumption, questions are being asked about the energy contribution of computing equipment. Al- though studies have documented the share of energy consumption by this type of equipment over the years, research

Namboodiri, Vinod

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

EE Regional Technology Roadmap Includes comparison  

E-Print Network (OSTI)

EE Regional Technology Roadmap Includes comparison against 6th Power Plan (Update cyclically Roadmap with a strong linkage to utility programs Scan for Technologies 1. How does it address the NW Data Clearinghouse BPA/RTF NEEA/Regional Programs Group Update Regional EE Technology Roadmap Lighting

242

Video Topics Include Freshman Inquiry Course  

E-Print Network (OSTI)

Video Topics Include Freshman Inquiry Course Open Advisement/ Group Advisement Dinning Campus: End of Spring 2012, Commencement May 18: Grades available on MAX after 4:30pm AdvisementYouTubeVideoSeries I N S I D E T H I S I S S U E : YouTube Video Series 1 Mark Your Calendar 1 Exploring Major Tips 2

Hardy, Christopher R.

243

Including Ocean Model Uncertainties in Climate Predictions  

E-Print Network (OSTI)

Including Ocean Model Uncertainties in Climate Predictions Chris Brierley, Alan Thorpe, Mat Collins's to perform the integrations Currently uses a `slab' ocean #12;An Ocean Model Required to accurately model transient behaviour Will have its own uncertainties Requires even more computing power Create new models

Jones, Peter JS

244

Noise of cleanroom recirculation systems  

Science Journals Connector (OSTI)

Recirculation air systems are used by the microelectronics industry as the primary source of unidirectional air flow in cleanrooms. The commonly used recirculation systems include: (1) packaged air handlers which include centrifugal or plug (plenum) fans generally located at fan deck level above the cleanroom; (2) fan?tower recirculation systems consisting most often of vertically mounted vaneaxial fans arranged along the cleanroom perimeter; (3) individual fan?filter units in which the HEPA or ULPA filters are combined with small direct drive blowers supported by the ceiling suspension system; and (4) minienvironments which create superclean conditions around individual tools within a less clean ‘‘ballroom.’’ In this paper the commonly used recirculation systems will be described typical sound power levels and spectrum characteristics of the systems will be presented the natural noise attenuation along the air flow paths will be listed the theoretical models for predicting noise levels in a cleanroom will be introduced and noise mitigation means which can be integrated into different systems will be discussed. Also presented will be the typical noise levels measured in operating cleanrooms.

Mei Q. Wu; Colin G. Gordon

1998-01-01T23:59:59.000Z

245

Buildings Included on EMS Reports"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Legacy Management Office of Legacy Management Buildings Included on EMS Reports" "Site","Property Name","Property ID","GSF","Incl. in Water Baseline (CY2007)","Water Baseline (sq. ft.)","Water CY2008 (sq. ft.)","Water CY2009 (sq. ft.)","Water Notes","Incl. in Energy Baseline (CY2003)","Energy Baseline (sq. ft.)","CY2008 Energy (sq. ft.)","CY2009 Energy (sq. ft.)","Energy Notes","Included as Existing Building","CY2008 Existing Building (sq. ft.)","Reason for Building Exclusion" "Column Totals",,"Totals",115139,,10579,10579,22512,,,3183365,26374,115374,,,99476 "Durango, CO, Disposal/Processing Site","STORAGE SHED","DUD-BLDG-STORSHED",100,"no",,,,,"no",,,,"OSF","no",,"Less than 5,000 GSF"

246

Power generation method including membrane separation  

DOE Patents (OSTI)

A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

Lokhandwala, Kaaeid A. (Union City, CA)

2000-01-01T23:59:59.000Z

247

Completion strategy includes clay and precipitate control  

SciTech Connect

This article describes the conditions which are necessary for a successful oil well completion in the Mississippi and Cherokee zones of South Central Kansas. Topics considered include paraffin precipitation, clay swelling and migration, and iron precipitation. Clays in these zones are sensitive to water-base treating fluids and tend to swell and migrate to the well bore, thereby causing permeability damage. The presence of iron in the Mississippi and Cherokee formations has been indicated by cuttings, core samples, and connate water samples.

Sandy, T.; Gardner, G.R.

1985-05-06T23:59:59.000Z

248

Jet-calculus approach including coherence effects  

Science Journals Connector (OSTI)

We show how integrodifferential equations typical of jet calculus can be combined with an averaging procedure to obtain jet-calculus-based results including the Mueller interference graphs. Results in longitudinal-momentum fraction x for physical quantities are higher at intermediate x and lower at large x than with the conventional ‘‘incoherent’’ jet calculus. These results resemble those of Marchesini and Webber, who used a Monte Carlo approach based on the same dynamics.

L. M. Jones; R. Migneron; K. S. S. Narayanan

1987-01-01T23:59:59.000Z

249

TEMPORAL MODELING OF SLIDE CHANGE IN PRESENTATION VIDEOS Quanfu Fan (1), Arnon Amir (2), Kobus Barnard (1), Ranjini Swaminathan (1) and Alon Efrat (1)  

E-Print Network (OSTI)

TEMPORAL MODELING OF SLIDE CHANGE IN PRESENTATION VIDEOS Quanfu Fan (1), Arnon Amir (2), Kobus develop a general framework to automatically match elec- tronic slides to the videos of corresponding video libraries. Our approach extends previous work that matches slides based on visual features alone

Barnard, Kobus

250

Optical panel system including stackable waveguides  

DOE Patents (OSTI)

An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

DeSanto, Leonard (Dunkirk, MD); Veligdan, James T. (Manorville, NY)

2007-11-20T23:59:59.000Z

251

Thermovoltaic semiconductor device including a plasma filter  

DOE Patents (OSTI)

A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

Baldasaro, Paul F. (Clifton Park, NY)

1999-01-01T23:59:59.000Z

252

Complex shell model representation including antibound states  

Science Journals Connector (OSTI)

A generalization of the complex shell model formalism is presented that includes antibound states in the basis. These states, together with bound states, Gamow states, and the continuum background, represented by properly chosen scattering waves, form a representation in which all states are treated on the same footing. Two-particle states are evaluated within this formalism, and observable two-particle resonances are defined. The formalism is illustrated in the well-known case of Li11 in its bound ground state and in Ca70(g.s.), which is also bound. Both cases are found to have a halo structure. These halo structures are described within the generalized complex shell model. We investigated the formation of two-particle resonances in these nuclei, but no evidence of such resonances was found.

R. Id Betan; R. J. Liotta; N. Sandulescu; T. Vertse; R. Wyss

2005-11-30T23:59:59.000Z

253

SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE  

SciTech Connect

The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to stochastic hydrologic properties and flow processes.

C. Tsang

2004-09-22T23:59:59.000Z

254

Buildings Energy Data Book: 5.5 Thermal Distribution Systems  

Buildings Energy Data Book (EERE)

5 5 Typical Commercial Building Thermal Energy Distribution Design Load Intensities (Watts per SF) Distribution System Fans Other Central System Supply Fans Cooling Tower Fan Central System Return Fans Air-Cooled Chiller Condenser Fan 0.6 Terminal Box Fans 0.5 Exhaust Fans (2) Fan-Coil Unit Fans (1) Condenser Fans 0.6 Packaged or Split System Indoor Blower 0.6 Pumps Chilled Water Pump Condenser Water Pump Heating Water Pump Note(s): Source(s): 0.1 - 0.2 0.1 - 0.2 1) Unducted units are lower than those with some ductwork. 2) Strong dependence on building type. BTS/A.D. Little, Energy Consumption Characteristics of Commercial Building HVAC Systems, Volume II:Thermal Distribution, Auxiliary Equipment, and Ventilation, Oct. 1999, Table 3-1, p. 3-6. 0.3 - 1.0 0.1 - 0.3 0.1 - 0.4

255

Economic recovery of oil trapped at fan margins using high angle wells and multiple hydraulic fractures. Annual report, September 28, 1995--September 27, 1996  

SciTech Connect

The digital fan margin in the northeast portion of the Yowlumne field contains significant reserves but is not economic to develop using verticle wells. Numerous interbedded shales and deteriorating rock properties limit producibility. In addition, extreme depths (13,000 ft) present a challenging environment for hydraulic fracturing and artificial lift. Lastly, a mature waterflood increases risk because of the uncertainty with size and location of flood fronts. This project attempts to demonstrate the effectiveness of exploiting the distal fan margin of this slope-basin clastic reservoir through the use of a high-angle well completed with multiple hydraulic-fracture treatments. The combination of a high-angle (or horizontal) well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional verticle wells while maintaining verticle communication between thin interbedded layers and the wellbore. The equivalent production rate and reserves of three verticle wells are anticipated at one-half to two-thirds the cost.

Niemeyer, B.L.

1997-09-01T23:59:59.000Z

256

Improved recovery from Gulf of Mexico reservoirs. Volume I (of 4): Task 1, conduct research on mud-rich submarine fans. Final report, February 14, 1995--October 13, 1996  

SciTech Connect

The objective for this portion of the research involved conducting field studies and laboratory investigations to develop and refine models for mud-rich submarine fan architectures used by seismic analysis and reservoir engineers. These research aspects have been presented in two papers as follows: (1) Bouma, A.H., {open_quotes}Review of Fine-Grained Submarine Fans and Turbidite Systems{close_quotes}; (2) Kirkova, J.T. and Lorenzo, J.M., {open_quotes}Synthetic Seismic Modeling of Measured Submarine Fans Sections, Case Study of the Tanqua Complex, Karoo, South Africa{close_quotes} The {open_quotes}Review of Fine-Grained Submarine Fans and Turbidite Systems{close_quotes} by Arnold Bouma discusses research targeted toward stimulating an increase in oil and gas recovery by developing new and improved geological understanding. The {open_quotes}Synthetic Seismic Modeling of Measured Submarine Fan Sections, Case Study of the Tanqua Complex, Karoo, South Africa{close_quotes} by J.T. Kirkova and J.M. Lorenso discusses the limitations of verticle resolution and how this affects the interpretation and characterization of submarine fan complexes.

Kimbrell, W.C.; Bassiouni, Z.A.; Bourgoyne, A.T.

1997-01-13T23:59:59.000Z

257

Memorandum Memorializing Ex Parte Communication, DOE impending  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Memorandum Memorializing Ex Parte Communication, DOE impending Memorandum Memorializing Ex Parte Communication, DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods. Memorandum Memorializing Ex Parte Communication, DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods. The meeting was requested by AMCA International to introduce the association's leadership, standards, and experience in developing fan standards to DOE; to learn more about the DOE process for developing regulations for fan efficiency standards; and to inform DOE on how commercial and industrial fan markets work. AMCA_Ex_Parte.pdf More Documents & Publications DOE-STD-1168-2013 DOE Meeting Memorandum: Ex Parte Communications Independent Oversight Review, Savannah River Site - August 2011

258

Chilled water coil freeze protection via internal drying  

SciTech Connect

Winter lay-up for chilled water coils has been a problem for as long as there has been air conditioning. A frozen coil may be so seriously damaged that it must be replaced. Also, as the coil thaws, significant flooding of adjacent areas may result. Over the years, various methods of freeze protection have been used. These methods include using a glycol solution to lower the freezing point, blowing the coil clear with compressed air, or installing coils that incorporate freeze plugs in the coil design. Each of these methods has one or more significant drawbacks. A new approach, nicknamed ``The LaRocca Solution`` is a simple procedure. Air is blown continuously through the coils to ensure that they become completely dry and remain so. Instead of using a separate blower or air compressor to blow out the water, the supply fan itself is used. On most medium- and high-pressure HVAC systems, the static pressure produced by the supply fan is sufficient to overcome the internal resistance of the coil tubes. One simply configures the chilled water piping in a manner that permits the coils to be drained by gravity and then purged by the discharge of the fan. The fan does all the work.

LaRocca, D.V. [Yale Univ. School of Medicine, New Haven, CT (United States). Building Services and Operations Dept.

1997-12-01T23:59:59.000Z

259

Nuclear Arms Control R&D Consortium includes Los Alamos  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Arms Control R&D Consortium includes Los Alamos Nuclear Arms Control R&D Consortium includes Los Alamos A consortium led by the University of Michigan that includes LANL as...

260

2014-09-16 Issuance: Energy Conservation Standards for Ceiling Fans; Notice of Public Meeting and Availability of Preliminary Technical Support Document  

Energy.gov (U.S. Department of Energy (DOE))

This document is a pre-publication Federal Register notice of public meeting and availability of preliminary technical support document regarding energy conservation standards for ceiling fans, as issued by the Deputy Assistant Secretary on September 16, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

2014-10-27 Issuance: Energy Conservation Standards for Ceiling Fan Light Kits; Notice of Public Meeting and Availability of the Preliminary Technical Support Document  

Energy.gov (U.S. Department of Energy (DOE))

This document is a pre-publication Federal Register notice of public meeting and availability of the preliminary technical support document regarding energy conservation standards for ceiling fan light kits, as issued by the Deputy Assistant Secretary for Energy Efficiency on October 27, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

262

BPM Motors in Residential Gas Furnaces: What are theSavings?  

SciTech Connect

Residential gas furnaces contain blowers to distribute warm air. Currently, furnace blowers use either a Permanent Split Capacitor (PSC) or a Brushless Permanent Magnet (BPM) motor. Blowers account for the majority of furnace electricity consumption. Therefore, accurate determination of the blower electricity consumption is important for understanding electricity consumption of furnaces. The electricity consumption of blower motors depends on the static pressure across the blower. This paper examines both types of blower motors in non-condensing non-weatherized gas furnaces at a range of static pressures. Fan performance data is based on manufacturer product literature and laboratory tests. We use field-measured static pressure in ducts to get typical system curves to calculate how furnaces would operate in the field. We contrast this with the electricity consumption of a furnace blower operating under the DOE test procedure and manufacturer rated conditions. Furnace electricity use is also affected by operating modes that happen at the beginning and end of each furnace firing cycle. These operating modes are the pre-purge and post-purge by the draft inducer, the on-delay and off-delay of the blower, and the hot surface ignitor operation. To accurately calculate this effect, we use the number of firing cycles in a typical California house in the Central Valley of California. Cooling hours are not considered in the DOE test procedure. We also account for furnace blower use by the air conditioner and stand-by power. Overall BPM motors outperform PSC motors, but the total electricity savings are significantly less than projected using the DOE test procedure conditions. The performance gains depend on the static pressure of the household ducts, which are typically much higher than in the test procedures.

Lutz, James; Franco, Victor; Lekov, Alex; Wong-Parodi, Gabrielle

2006-05-12T23:59:59.000Z

263

Tribological sinks in emerging industries: electronics and robotics  

SciTech Connect

This report describes a preliminary review of the impact of tribological effects - losses due to friction and wear - in two emerging industries: robotics and electronics. Major sources of tribological wear in the robotics industry include the chains used to drive the robots and the joints in the elbow and wrist. In the electronics industry, the largest source of tribological wear is the particulate wear of vacuum pumps used in corrosive environments. Other significant sources of wear are the conveyor belts, blowers, and fans used for clean rooms, and the slicing, lapping and polishing operations for silicon wafers. The major loss mechanisms are friction and abrasion (abrasion includes 2-body wear, 3-body wear, gouging, grinding, erosion, and cutting wear).

Russell, J.A.; Hane, G.J.

1986-08-01T23:59:59.000Z

264

Including Retro-Commissioning in Federal Energy Savings Performance Contracts  

Energy.gov (U.S. Department of Energy (DOE))

Guidance document on the importance of (and steps to) including retro-commissioning in Federal energy savings performance contracts (ESPCs).

265

FEMP Expands ESPC ENABLE Program to Include More Energy Conservation...  

Energy Savers (EERE)

(ESPC) ENABLE program to include two new energy conservation measures (ECMs): solar photovoltaic (PV) and simple one-for-one heating, ventilation, and air conditioning (HVAC)...

266

SciTech Connect: Microfluidic devices and methods including porous...  

Office of Scientific and Technical Information (OSTI)

porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to the monolith pores. Authors: Hatch, Anson V; Sommer,...

267

Including Retro-Commissioning in Federal Energy Savings Performance Contracts  

Energy.gov (U.S. Department of Energy (DOE))

Document describes guidance on the importance of (and steps to) including retro-commissioning in federal energy savings performance contracts (ESPCs).

268

Percentage of Total Natural Gas Industrial Deliveries included...  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Price Percentage of Total Industrial Deliveries included in Prices Vehicle Fuel Price Electric Power Price Period: Monthly Annual Download Series History Download...

269

Consider Steam Turbine Drives for Rotating Equipment: Office of Industrial Technologies (OIT) Steam Tip Fact Sheet No.21  

SciTech Connect

Steam turbines are well suited as prime movers for driving boiler feedwater pumps, forced or induced-draft fans, blowers, air compressors, and other rotating equipment. This service generally calls for a backpressure non-condensing steam turbine. The low-pressure steam turbine exhaust is available for feedwater heating, preheating of deaerator makeup water, and/or process requirements.

Not Available

2002-01-01T23:59:59.000Z

270

AN OPTIMIZED TWO-CAPACITY ADVANCED ELECTRIC HEAT PUMP S. E. Veyo, Manager, Heat Exchange Systems Research  

E-Print Network (OSTI)

#12;AN OPTIMIZED TWO-CAPACITY ADVANCED ELECTRIC HEAT PUMP S. E. Veyo S. E. Veyo, Manager, Heat Exchange Systems Research Westinghouse Electric Corporation, R&D Center 1310 Beulah Road Pittsburgh, PA 15235 KEYWORDS: heat pump, air conditioner, electric, residential, energy, compressor, fan, blower, heat

Oak Ridge National Laboratory

271

Horizontal Air Flow Drying Foods at Home Safely  

E-Print Network (OSTI)

Horizontal Air Flow Drying Foods at Home Safely Choosing a Food Dehydrator Drying is one. The thermostat should go up to 160 degrees F. The unit should have a fan or blower for air circulation. Mesh trays made of sturdy plastic that can be easily washed. UL seal of approval is recommended for safety

272

E-Print Network 3.0 - air treatment system Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Last Updated: 41702 Summary: , including refrigeration, air conditioning, heating systems, ventilating fans, roof ventilators, exhaust fans... , water treatment equipment,...

273

E-Print Network 3.0 - air conditioning maintenance Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Last Updated: 41702 Summary: , including refrigeration, air conditioning, heating systems, ventilating fans, roof ventilators, exhaust fans... : Use of mechanical equipment...

274

E-Print Network 3.0 - air handling systems Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Last Updated: 41702 Summary: , including refrigeration, air conditioning, heating systems, ventilating fans, roof ventilators, exhaust fans... , water treatment equipment,...

275

Microfluidic devices and methods including porous polymer monoliths  

DOE Patents (OSTI)

Microfluidic devices and methods including porous polymer monoliths are described. Polymerization techniques may be used to generate porous polymer monoliths having pores defined by a liquid component of a fluid mixture. The fluid mixture may contain iniferters and the resulting porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to the monolith pores.

Hatch, Anson V; Sommer, Gregory J; Singh, Anup K; Wang, Ying-Chih; Abhyankar, Vinay V

2014-04-22T23:59:59.000Z

276

Solar Energy Education. Reader, Part II. Sun story. [Includes glossary  

SciTech Connect

Magazine articles which focus on the subject of solar energy are presented. The booklet prepared is the second of a four part series of the Solar Energy Reader. Excerpts from the magazines include the history of solar energy, mythology and tales, and selected poetry on the sun. A glossary of energy related terms is included. (BCS)

Not Available

1981-05-01T23:59:59.000Z

277

Range of a projectile, including air resistance. Introduction  

E-Print Network (OSTI)

resistance, it is easy to show (elementary physics classes) that if we throw a projectile with a speed vRange of a projectile, including air resistance. Introduction Here we study the motion of a projectile thrown through the air, including the important effects of air resistance.We will investi- gate

Young, A. Peter

278

Improving Best Air Conditioner Efficiency by 20-30% through a High Efficiency Fan and Diffuser Stage Coupled with an Evaporative Condenser Pre-Cooler  

SciTech Connect

The Florida Solar Energy Center (FSEC) conducted a research project to improve the best residential air conditioner condenser technology currently available on the market by retrofitting a commercially-available unit with both a high efficiency fan system and an evaporative pre-cooler. The objective was to integrate these two concepts to achieve an ultra-efficient residential air conditioner design. The project produced a working prototype that was 30% more efficient compared to the best currently-available technologies; the peak the energy efficiency ratio (EER) was improved by 41%. Efficiency at the Air-Conditioning and Refrigeration Institute (ARI) standard B-condition which is used to estimate seasonal energy efficiency ratio (SEER), was raised from a nominal 21 Btu/Wh to 32 Btu/Wh.

Parker, Danny S; Sherwin, John R; Raustad, Richard

2014-04-10T23:59:59.000Z

279

Articles which include chevron film cooling holes, and related processes  

DOE Patents (OSTI)

An article is described, including an inner surface which can be exposed to a first fluid; an inlet; and an outer surface spaced from the inner surface, which can be exposed to a hotter second fluid. The article further includes at least one row or other pattern of passage holes. Each passage hole includes an inlet bore extending through the substrate from the inlet at the inner surface to a passage hole-exit proximate to the outer surface, with the inlet bore terminating in a chevron outlet adjacent the hole-exit. The chevron outlet includes a pair of wing troughs having a common surface region between them. The common surface region includes a valley which is adjacent the hole-exit; and a plateau adjacent the valley. The article can be an airfoil. Related methods for preparing the passage holes are also described.

Bunker, Ronald Scott; Lacy, Benjamin Paul

2014-12-09T23:59:59.000Z

280

What To Include In The Whistleblower Complaint? | National Nuclear Security  

National Nuclear Security Administration (NNSA)

To Include In The Whistleblower Complaint? | National Nuclear Security To Include In The Whistleblower Complaint? | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog What To Include In The Whistleblower Complaint? Home > About Us > Our Operations > Management and Budget > Whistleblower Program > What To Include In The Whistleblower Complaint? What To Include In The Whistleblower Complaint?

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Untitled  

U.S. Energy Information Administration (EIA) Indexed Site

Air-Conditioning: Air-conditioning is one of the five end-use categories in Air-Conditioning: Air-conditioning is one of the five end-use categories in this report. It is defined as cooling and dehumidification of the air in a building by a refrigeration unit driven by electricity or gas. This definition excludes fans, blowers, or evaporative cooling systems ("swamp coolers") that are not connected to a refrigeration unit. Air-conditioning units that are not currently in working condition or are not used are still included in the RECS if they are in place in the housing unit. If the household did not use its air-conditioning equipment during the summer of 1993, no consumption and expenditures are imputed for air-conditioning. Apartments: A housing unit in a building with multiple units--a structure that is divided into living quarters for more than one family or household

282

Mechanical engineers' handbook, energy and power. 3rd ed.  

SciTech Connect

In addition to chapters on thermophysical properties of fluids, fundamentals of fluid mechanics, thermodynamics, heat transfer, combustion, and furnaces, Book 4 of the Handbook features coverage of both conventional (gaseous and liquid fuels, coal, and nuclear) and alternative (solar, geothermal, and fuel cells) energy sources, plus chapters on power machinery, refrigeration and cryogenics, environmental issues, and thermal systems optimization. Much of the material in this book is new or extensively revised, including coverage of such topics as: Heat pipes; Wind turbines; Fuel cells; Thermal systems optimization; Combustion; Fans, blowers, compressors, and pumps; Indoor environmental control; and Fluid power. Chapters of particular interest are: Combustion by Eric Eddings; Furnaces by Carroll Cone; Gaseous fuels by Richard J. Reed; Coals, lignite, peat by James Keppeler; and Air pollution-control technologies by C.A. Miller.

Myer Kutz (ed.)

2005-12-15T23:59:59.000Z

283

U-182: Microsoft Windows Includes Some Invalid Certificates | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

82: Microsoft Windows Includes Some Invalid Certificates 82: Microsoft Windows Includes Some Invalid Certificates U-182: Microsoft Windows Includes Some Invalid Certificates June 4, 2012 - 7:00am Addthis PROBLEM: A vulnerability was reported in Microsoft Windows. A remote user may be able to spoof code signing signatures. PLATFORM: Version(s): XP SP3, 2003 SP2, Vista SP2, 2008 SP2, 7 SP1, 2008 R2 SP1; and prior service packs ABSTRACT: The operating system includes some invalid intermediate certificates. The vulnerability is due to the certificate authorities and not the operating system itself. Reference Links: Security tracker ID 1027114 GENERIC-MAP-NOMATCH Vendor Advisory IMPACT ASSESSMENT: High Discussion: The invalid certificates and their thumbprints are: Microsoft Enforced Licensing Intermediate PCA: 2a 83 e9 02 05 91 a5 5f c6

284

FINITE ELEMENT ANALYSIS OF STEEL WELDED COVERPLATE INCLUDING COMPOSITE DOUBLERS  

E-Print Network (OSTI)

With the increasing focus on welded bridge members resulting in crack initiation and propagation, there is a large demand for creative solutions. One of these solutions includes the application of composite doublers over the critical weld. In order...

Petri, Brad

2008-05-15T23:59:59.000Z

285

Search for Earth-like planets includes LANL star analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Search for earth-like planets Search for Earth-like planets includes LANL star analysis The mission will not only be able to search for planets around other stars, but also yield...

286

atlantic region including: Topics by E-print Network  

NLE Websites -- All DOE Office Websites (Extended Search)

R: L. Tossey, T. Beeson, Parks, B. TruittTNC, UD MPEO staff 2 Climate scenarios of sea level rise for the northeast Atlantic Ocean: a study including the effects of ocean...

287

INTRODUCTION Embryonic development is sensitive to many factors, including  

E-Print Network (OSTI)

, mothers can attempt to maintain their developing embryos at an optimal temperature, and thus The Journal RESEARCH ARTICLE Maternal influences on early development: preferred temperature prior to oviposition1346 INTRODUCTION Embryonic development is sensitive to many factors, including hormones, toxins

Denardo, Dale

288

Limited Personal Use of Government Office Equipment including Information Technology  

Directives, Delegations, and Requirements

The Order establishes requirements and assigns responsibilities for employees' limited personal use of Government resources (office equipment and other resources including information technology) within DOE, including NNSA. The Order is required to provide guidance on appropriate and inappropriate uses of Government resources. This Order was certified 04/23/2009 as accurate and continues to be relevant and appropriate for use by the Department. Certified 4-23-09. No cancellation.

2005-01-07T23:59:59.000Z

289

Percentage of Total Natural Gas Commercial Deliveries included in Prices  

Gasoline and Diesel Fuel Update (EIA)

City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area May-13 Jun-13 Jul-13 Aug-13 Sep-13 Oct-13 View History U.S. 63.3 59.3 57.9 57.0 57.4 61.3 1983-2013 Alabama 71.7 71.0 68.5 68.2 68.4 66.7 1989-2013 Alaska 94.1 91.6 91.1 91.0 92.3 92.6 1989-2013 Arizona 84.0 83.0 81.6 80.3 82.8 82.7 1989-2013 Arkansas 37.8 28.3 28.1 28.6 26.7 28.0 1989-2013

290

Percentage of Total Natural Gas Industrial Deliveries included in Prices  

Gasoline and Diesel Fuel Update (EIA)

City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area May-13 Jun-13 Jul-13 Aug-13 Sep-13 Oct-13 View History U.S. 16.5 16.3 16.0 16.2 16.6 16.9 2001-2013 Alabama 22.1 21.7 21.6 22.8 22.0 22.7 2001-2013 Alaska 100.0 100.0 100.0 100.0 100.0 100.0 2001-2013 Arizona 13.4 15.7 15.3 13.8 13.7 13.9 2001-2013 Arkansas 1.7 1.4 1.2 1.4 1.3 1.5 2001-2013

291

Honda Smart Home to Include Berkeley Lab Ventilation Controller  

NLE Websites -- All DOE Office Websites (Extended Search)

Honda Smart Home to Include Berkeley Lab Ventilation Controller Honda Smart Home to Include Berkeley Lab Ventilation Controller Honda smart home October 2013 October-November Special Focus: Energy Efficiency, Buildings, and the Electric Grid Honda Motor Company Inc is proceeding with plans to build a Smart Home in Davis, California, to demonstrate the latest in renewable energy technologies and energy efficiency. The home is expected to produce more energy than is consumed, demonstrating how the goal of "zero net energy" can be met in the near term future. A ventilation controller developed by researchers at Berkeley Lab's Environmental Energy Technologies Division (EETD) will be included in the smart home. EETD is currently working with the developers of the home control system to integrate its control algorithms.

292

DOE Revises its NEPA Regulations, Including Categorical Exclusions |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revises its NEPA Regulations, Including Categorical Exclusions Revises its NEPA Regulations, Including Categorical Exclusions DOE Revises its NEPA Regulations, Including Categorical Exclusions September 30, 2011 - 2:30pm Addthis On September 27, 2011, the Department of Energy (DOE) approved revisions to its National Environmental Policy Act (NEPA) regulations, and on September 28th, submitted the revisions to the Federal Register. The final regulations, which become effective 30 days after publication in the Federal Register, are the culmination of a 2-year process to review and update DOE's NEPA implementing procedures. This process involved internal evaluation, public participation, and Council on Environmental Quality (CEQ) review. The revisions are designed to focus Departmental resources on projects with the potential for significant environmental impact, to better

293

Introduction to Small-Scale Photovoltaic Systems (Including RETScreen Case  

Open Energy Info (EERE)

Introduction to Small-Scale Photovoltaic Systems (Including RETScreen Case Introduction to Small-Scale Photovoltaic Systems (Including RETScreen Case Study) (Webinar) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Introduction to Small-Scale Photovoltaic Systems (Including RETScreen Case Study) (Webinar) Focus Area: Solar Topics: Market Analysis Website: www.leonardo-energy.org/webinar-introduction-small-scale-photovoltaic- Equivalent URI: cleanenergysolutions.org/content/introduction-small-scale-photovoltaic Language: English Policies: Deployment Programs DeploymentPrograms: Project Development This video teaches the viewer about photovoltaic arrays and RETscreen's photovoltaic module, which can be used to project the cost and production of an array. An example case study was

294

projects are valued at approximately $67 million (including $15 million  

NLE Websites -- All DOE Office Websites (Extended Search)

projects are valued at approximately $67 million (including $15 million projects are valued at approximately $67 million (including $15 million in non-Federal cost sharing) over four years. The overall goal of the research is to develop carbon dioxide (CO 2 ) capture and separation technologies that can achieve at least 90 percent CO 2 removal at no more than a 35 percent increase in the cost of electricity. The projects, managed by FE's National Energy Technology Laboratory (NETL), include: (1) Linde, LLC, which will use a post-combustion capture technology incorporating BASF's novel amine-based process at a 1-megawatt electric (MWe) equivalent slipstream pilot plant at the National Carbon Capture Center (NCCC) (DOE contribution: $15 million); (2) Neumann Systems Group, Inc., which will design, construct, and test a patented NeuStreamTM absorber at the Colorado

295

Including Tunneling in Non-Born–Oppenheimer Simulations  

Science Journals Connector (OSTI)

Including Tunneling in Non-Born–Oppenheimer Simulations ... We note that tunneling may be included in the modeling of electronically nonadiabatic processes by other methods as well, for example, quantal wave packet methods where the wave packet is not restricted to follow a classical trajectory,(18) path integral dynamics,(19-21) and the initial value representation,(22) but these methods will require more development of efficient computational strategies for their practical application to complex systems, whereas the method proposed here has a cost comparable to non-Born–Oppenheimer (NBO) trajectory calculations that do not include tunneling. ... We also ran Born–Oppenheimer trajectories with the same total energy on the adiabatic ground state for comparison. ...

Jingjing Zheng; Rubén Meana-Pañeda; Donald G. Truhlar

2014-05-15T23:59:59.000Z

296

Thin film solar cell including a spatially modulated intrinsic layer  

DOE Patents (OSTI)

One or more thin film solar cells in which the intrinsic layer of substantially amorphous semiconductor alloy material thereof includes at least a first band gap portion and a narrower band gap portion. The band gap of the intrinsic layer is spatially graded through a portion of the bulk thickness, said graded portion including a region removed from the intrinsic layer-dopant layer interfaces. The band gap of the intrinsic layer is always less than the band gap of the doped layers. The gradation of the intrinsic layer is effected such that the open circuit voltage and/or the fill factor of the one or plural solar cell structure is enhanced.

Guha, Subhendu (Troy, MI); Yang, Chi-Chung (Troy, MI); Ovshinsky, Stanford R. (Bloomfield Hills, MI)

1989-03-28T23:59:59.000Z

297

Solar Energy Education. Renewable energy: a background text. [Includes glossary  

SciTech Connect

Some of the most common forms of renewable energy are presented in this textbook for students. The topics include solar energy, wind power hydroelectric power, biomass ocean thermal energy, and tidal and geothermal energy. The main emphasis of the text is on the sun and the solar energy that it yields. Discussions on the sun's composition and the relationship between the earth, sun and atmosphere are provided. Insolation, active and passive solar systems, and solar collectors are the subtopics included under solar energy. (BCS)

Not Available

1985-01-01T23:59:59.000Z

298

Methods of producing adsorption media including a metal oxide  

DOE Patents (OSTI)

Methods of producing a metal oxide are disclosed. The method comprises dissolving a metal salt in a reaction solvent to form a metal salt/reaction solvent solution. The metal salt is converted to a metal oxide and a caustic solution is added to the metal oxide/reaction solvent solution to adjust the pH of the metal oxide/reaction solvent solution to less than approximately 7.0. The metal oxide is precipitated and recovered. A method of producing adsorption media including the metal oxide is also disclosed, as is a precursor of an active component including particles of a metal oxide.

Mann, Nicholas R; Tranter, Troy J

2014-03-04T23:59:59.000Z

299

Watson Library enhancements to include new service desk  

E-Print Network (OSTI)

12/5/13 KU Libraries News: Watson Library enhancements to include new service desk www.lib.ku.edu/news/newservicedesk.shtml 1/1 Contact Us The University of Kansas Libraries Lawrence, KS 66045 (785) 864-8983 Copyright © 2013 by the University... of Kansas Watson Library enhancements to include new service desk The University of Kansas Libraries is adding a new service desk to Watson Library to enhance the user experience and draw attention to new and existing resources. The desk, which...

2008-01-01T23:59:59.000Z

300

Requirements: A minimum of 15 PSYC credits, including  

E-Print Network (OSTI)

» Three other 2000-3000-level PSYC courses (any area) No more than 3 credits of PSYC 3889 or 3999 canRequirements: A minimum of 15 PSYC credits, including: » One Area I course » One Area II course) ___2100 (Principles of Research in Psychology) Area I. Social, Developmental, Clinical, & Industrial

Alpay, S. Pamir

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Procedures in Modules (1) Including all procedures within modules  

E-Print Network (OSTI)

Procedures in Modules (1) Including all procedures within modules works very well in almost all designing these if possible #12;Procedures in Modules (2) These are very much like internal procedures Works very well in almost all programs Everything accessible in the module can also be used in the procedure

302

Free Energy Efficiency Kit includes CFL light bulbs,  

E-Print Network (OSTI)

Free Energy Efficiency Kit Kit includes CFL light bulbs, spray foam, low-flow shower head, and more! Building Science 101 Presentation BPI Certified Building Professionals will present home energy efficiency for discounted energy assessments. FREE HOME ENERGY EFFICIENCY SEMINAR N e w R i ver L i g ht & Pow e r a n d W

Rose, Annkatrin

303

Biomass Potentials from California Forest and Shrublands Including Fuel  

E-Print Network (OSTI)

Biomass Potentials from California Forest and Shrublands Including Fuel Reduction Potentials-04-004 February 2005 Revised: October 2005 Arnold Schwarzenegger, Governor, State of California #12;Biomass Tiangco, CEC Bryan M. Jenkins, University of California #12;Biomass Potentials from California Forest

304

Project Management Business Process Project Delivery Processes Includes VE Budget  

E-Print Network (OSTI)

Project Management Business Process Project Delivery Processes Includes VE Budget Schedule Activities that do/could feed into PMBP LEGEND VE Cost Avoidance Program Coverage Document Results (Before, could use the value methodology to facilitate after action review. The project manager is responsible

US Army Corps of Engineers

305

DISTINCTIONS The unique combination of factors which distinguish Berea includes  

E-Print Network (OSTI)

throughout Appala- chia. SUSTAINABLE CAMPUS FEATURES The College environment demonstrates sustainable living and enhances student learning. Recently renovated historical buildings and residence halls include sustain, Washington Monthly ranked Berea the #1 liberal arts college in the nation Listed as a "Best Buy" college

Baltisberger, Jay H.

306

FORUMA Hamilton Spectator Town Hall Event SPEAKERS INCLUDE  

E-Print Network (OSTI)

R001990104 OPEN FORUMA Hamilton Spectator Town Hall Event SPEAKERS INCLUDE: STEVE BUIST, Spectator, former chairman of Hamilton-Wentworth region and now president and CEO of the Hamilton Community Foundation. DR. CHRIS MACKIE, Hamilton's associate medical officer of health. MARK CHAMBERLAIN, president

Thompson, Michael

307

ASTRO-F/FIS observing simulation including detector characteristics  

E-Print Network (OSTI)

ASTRO-F/FIS observing simulation including detector characteristics Woong-Seob Jeong a,*, Soojong instruments, the far-infrared surveyor (FIS) will map the entire sky in four bands using short wavelength (SW- oped a suite of software with an aim to simulate the FIS observations (Jeong et al., 2000, 2003, 2004

Pak, Soojong

308

ASTRO-F/FIS Observing Simulation Including Detector Characteristics  

E-Print Network (OSTI)

ASTRO-F/FIS Observing Simulation Including Detector Characteristics Woong-Seob Jeong1, Soojong Pak1 simulations to examined the detector characteristics on the FIS instrument (Far- Infrared Surveyor) images narrow and wide bands using a short wavelength (SW) and long wavelength (LW) detector array. The FIS (Far

Lee, Hyung Mok

309

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids.

Raikhel, N.V.; Broekaert, W.F.; Namhai Chua; Kush, A.

1993-02-16T23:59:59.000Z

310

Methods of Purchasing Purchasing methods include the different  

E-Print Network (OSTI)

" purchases must be reviewed and approved by the Controller's Office. This may result in the end user beingMethods of Purchasing Purchasing methods include the different processes of ordering goods and/or services, and encumbering funds. #12;Method of Purchase Field Purchase Orders (FPO) Accepted

311

DOE Considers Natural Gas Utility Service Options: Proposal Includes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Considers Natural Gas Utility Service Options: Proposal Considers Natural Gas Utility Service Options: Proposal Includes 30-mile Natural Gas Pipeline from Pasco to Hanford DOE Considers Natural Gas Utility Service Options: Proposal Includes 30-mile Natural Gas Pipeline from Pasco to Hanford January 23, 2012 - 12:00pm Addthis Media Contacts Cameron Hardy, DOE , (509) 376-5365, Cameron.Hardy@rl.doe.gov RICHLAND, WASH. - The U.S. Department of Energy (DOE) is considering natural gas transportation and distribution requirements to support the Waste Treatment Plant (WTP) and evaporator operations at the Hanford Site in southeastern Washington State. DOE awarded a task order worth up to $5 million to the local, licensed supplier of natural gas in the Hanford area, Cascade Natural Gas Corporation (Cascade). Cascade will support DOE and its Environmental

312

Italy (including San Marino) Fossil-Fuel CO2 Emissions  

NLE Websites -- All DOE Office Websites (Extended Search)

Western Europe » Italy Western Europe » Italy (including San Marino) Italy (including San Marino) Fossil-Fuel CO2 Emissions Graph graphic Graphics Data graphic Data Trends As occurred in many industrialized nations, CO2 emissions from Italy rose steeply since the late 1940's until the growth was abruptly terminated in 1974. Since 1974, emissions from liquid fuels have vacillated, dropping from 76% to 46% of a static but varying total. Significant increases in natural gas consumption have compensated for the drop in oil consumption. In 2008, 35.8% of Italy's fossil-fuel CO2 emissions were due to natural gas consumption. Coal usage grew steadily until 1985 when CO2 emissions from coal consumption reached 16 million metric tons of carbon. Not until 2004 did coal usage exceed 1985 levels and now accounts for 13.9% of Italy's

313

Multi-processor including data flow accelerator module  

DOE Patents (OSTI)

An accelerator module for a data flow computer includes an intelligent memory. The module is added to a multiprocessor arrangement and uses a shared tagged memory architecture in the data flow computer. The intelligent memory module assigns locations for holding data values in correspondence with arcs leading to a node in a data dependency graph. Each primitive computation is associated with a corresponding memory cell, including a number of slots for operands needed to execute a primitive computation, a primitive identifying pointer, and linking slots for distributing the result of the cell computation to other cells requiring that result as an operand. Circuitry is provided for utilizing tag bits to determine automatically when all operands required by a processor are available and for scheduling the primitive for execution in a queue. Each memory cell of the module may be associated with any of the primitives, and the particular primitive to be executed by the processor associated with the cell is identified by providing an index, such as the cell number for the primitive, to the primitive lookup table of starting addresses. The module thus serves to perform functions previously performed by a number of sections of data flow architectures and coexists with conventional shared memory therein. A multiprocessing system including the module operates in a hybrid mode, wherein the same processing modules are used to perform some processing in a sequential mode, under immediate control of an operating system, while performing other processing in a data flow mode.

Davidson, George S. (Albuquerque, NM); Pierce, Paul E. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

314

United States/Mexico electricity trade study. [Glossary included  

SciTech Connect

During energy discussions between the United States and Mexico, it was suggested that the two countries revisit the issue of enhanced electricity trade because 10 years had elapsed since this issue was first studied. Responsibility to organize the updated study was jointly assigned to the US and to the Comision Federal de Electricidad (CFE). The study highlights the opportunities for increased cooperation among the electric utilities in the U.S. and Mexico. Direct benefits could include increased reliability of electric power service and cost savings through diversity of peak demand patterns and locational benefits associated with the siting of new generation sources. Indirect benefits could include improved economic and employment opportunities, especially in the border areas of both countries. While the study indicates that increased electricity trade is possible, there are significant technical and economic issues to consider. Any major increase in electricity trade would require a higher level of cooperation and coordination among utilities in both countries and would need to be preceded by a detailed analysis of associated benefits and costs (including environmental impacts) on both a short-term and a long-term basis. Whether US utilities and CFE decide to pursue specific projects will depend upon the need for and economics of those projects. The study recommends that the work begun by the two utility groups be continued. The study also recommends that regulators at all levels consider policies to increase coordination and review among all relevant parties so that unnecessary delays in planning and constructing needed facilities are avoided. 12 figs., 17 tabs.

Not Available

1991-03-01T23:59:59.000Z

315

Information regarding previous INCITE awards including selected highlights  

Office of Science (SC) Website

Information regarding previous INCITE awards including selected highlights Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities Accessing ASCR Supercomputers Oak Ridge Leadership Computing Facility (OLCF) Argonne Leadership Computing Facility (ALCF) National Energy Research Scientific Computing Center (NERSC) Energy Sciences Network (ESnet) Research & Evaluation Prototypes (REP) Innovative & Novel Computational Impact on Theory and Experiment (INCITE) ASCR Leadership Computing Challenge (ALCC) Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) News & Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building

316

Composite armor, armor system and vehicle including armor system  

DOE Patents (OSTI)

Composite armor panels are disclosed. Each panel comprises a plurality of functional layers comprising at least an outermost layer, an intermediate layer and a base layer. An armor system incorporating armor panels is also disclosed. Armor panels are mounted on carriages movably secured to adjacent rails of a rail system. Each panel may be moved on its associated rail and into partially overlapping relationship with another panel on an adjacent rail for protection against incoming ordnance from various directions. The rail system may be configured as at least a part of a ring, and be disposed about a hatch on a vehicle. Vehicles including an armor system are also disclosed.

Chu, Henry S.; Jones, Warren F.; Lacy, Jeffrey M.; Thinnes, Gary L.

2013-01-01T23:59:59.000Z

317

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a pu GOVERNMENT RIGHTS This application was funded under Department of Energy Contract DE-AC02-76ER01338. The U.S. Government has certain rights under this application and any patent issuing thereon.

Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

1993-02-16T23:59:59.000Z

318

Reliability modeling of transmission and distribution systems including dependent failures  

E-Print Network (OSTI)

is considered. Therefore, the trans i t ion rate mat r i x of the entire system need not be generated. Th i s method is compared wi th the sequential method for normal and stormy weather condit ions, and is then extended to include m weather conditions... . 9 E . Cut -Set Equations 10 III M A R K O V C U T - S E T M E T H O D 13 A . Basic Approach 13 B . Markov Cut -Set Me thod 13 C . Examp le 18 D . Compar ison wi th the Sequential Me thod 22 E . Cut-Sets w i th m Weather States 24 F . Extens...

Beydoun, Rami Sami

2012-06-07T23:59:59.000Z

319

Reservoir description of a sand-rich submarine fan complex for a steamflood project: upper Miocene Potter sandstone, North Midway Sunset field, California  

SciTech Connect

Nearly 650 m of cores from the upper Miocene Potter sandstone in Mobil's Alberta/Shale property, North Midway Sunset field, California, were examined to determine depositional facies, sand-body geometry, and reservoir quality for a proposed steamflood project. The Potter represents a sand-rich submarine fan complex with braided-channel, meandering-channel, levee, and crevasse-splay facies. The braided-channel facies (gravel and coarse sand) is thick (up to 100 m), sheetlike (> 500 m wide), and highly permeable (10,000 + md). The meandering-channel facies (coarse to medium sand) is up to 20 m thick, over 400 m long, lenticular in geometry, and exhibits an upward decrease in permeability (e.g., 9000 to 500 md) related to grain size that fines upward. The levee facies (in bioturbated sand) is up to 21 m thick, shows variable geometry, and is generally low in permeability (100-1500 md). The crevasse splay (medium sand) is up to 12 m thick, sheetlike (> 300 m wide), and shows moderately high permeability (2000-8000 md). The braided-channel facies was a product of density-modified grain flows, and the remaining three facies were deposited by turbidity currents. Steam flooding of the Potter reservoir should perform extremely well because the entire reservoir is composed of relatively clean sand and the reservoir lacks both horizontal and vertical permeability barriers.

Shanmugam, G.; Clayton, C.A.

1989-03-01T23:59:59.000Z

320

DOE Meeting Memorandum: Ex Parte Communications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Meeting Memorandum: Ex Parte Communications Meeting Memorandum: Ex Parte Communications Date: June 4, 2013 DOE Attendees: Ashley Armstrong, Lucy DeButts, and John Cymbalsky, EERE Building Technologies Program; Eric Haas, General Counsel Outside attendees: Patrick Keal, Big Ass Fans; Janie Wise, Vern Simmons, & Terry Paul, Cassidy & Associates Meeting Contact: Janie Wise - jwise@cassidy.com / 202-585-2553 Subject: Pending rulemakings on (1) Commercial and industrial fans and (2) Residential fans and lighting kits. Summary: Big Ass Fans is headquartered in Lexington, Kentucky, and designs and manufactures a variety of fan models for commercial, industrial and residential use. BAF met with DOE to discuss the ongoing rulemaking process for the commercial and industrial fans and blowers energy conservation

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

[Article 1 of 7: Motivates and Includes the Consumer]  

NLE Websites -- All DOE Office Websites (Extended Search)

2 of 7: Research on the Characteristics of a Modern Grid by the NETL 2 of 7: Research on the Characteristics of a Modern Grid by the NETL Modern Grid Strategy Team Accommodates All Generation and Storage Options Last month we presented the first Principal Characteristic of a Modern Grid, "Motivates and Includes the Consumer". This month we present a second characteristic, "Accommodates All Generation and Storage Options". This characteristic will fundamentally transition today's grid from a centralized model for generation to one that also has a more balanced contribution from decentralized generation and storage. This characteristic, along with the other six, define a Modern Grid that will power the 21 st Century economy. For a more detailed discussion on "Accommodates All Generation and Storage Options", please see:

322

Search for Earth-like planets includes LANL star analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Search for earth-like planets Search for earth-like planets Search for Earth-like planets includes LANL star analysis The mission will not only be able to search for planets around other stars, but also yield new insights into the parent stars themselves. March 6, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

323

Notices ROUTINE USES OF RECORDS MAINTAINED IN THE SYSTEM, INCLUDING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

83 Federal Register 83 Federal Register / Vol. 78, No. 51 / Friday, March 15, 2013 / Notices ROUTINE USES OF RECORDS MAINTAINED IN THE SYSTEM, INCLUDING CATEGORIES OF USERS AND THE PURPOSES OF SUCH USES: The Department may disclose information contained in a record in this system of records under the routine uses listed in this system of records without the consent of the individual if the disclosure is compatible with the purposes for which the record was collected. These disclosures may be made on a case-by-case basis or, if the Department has complied with the computer matching requirements of the Privacy Act of 1974, as amended (Privacy Act), under a computer matching agreement. Any disclosure of individually identifiable information from a record in this system must also comply with the requirements of section

324

Including stereoscopic information in the reconstruction of coronal magnetic fields  

E-Print Network (OSTI)

We present a method to include stereoscopic information about the three dimensional structure of flux tubes into the reconstruction of the coronal magnetic field. Due to the low plasma beta in the corona we can assume a force free magnetic field, with the current density parallel to the magnetic field lines. Here we use linear force free fields for simplicity. The method uses the line of sight magnetic field on the photosphere as observational input. The value of $\\alpha$ is determined iteratively by comparing the reconstructed magnetic field with the observed structures. The final configuration is the optimal linear force solution constrained by both the photospheric magnetogram and the observed plasma structures. As an example we apply our method to SOHO MDI/EIT data of an active region. In the future it is planned to apply the method to analyse data from the SECCHI instrument aboard the STEREO mission.

T. Wiegelmann; T. Neukirch

2008-01-23T23:59:59.000Z

325

Electra-optical device including a nitrogen containing electrolyte  

DOE Patents (OSTI)

Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between -15.degree. C. and 150.degree. C.

Bates, John B. (Oak Ridge, TN); Dudney, Nancy J. (Knoxville, TN); Gruzalski, Greg R. (Oak Ridge, TN); Luck, Christopher F. (Knoxville, TN)

1995-01-01T23:59:59.000Z

326

Copper laser modulator driving assembly including a magnetic compression laser  

DOE Patents (OSTI)

A laser modulator (10) having a low voltage assembly (12) with a plurality of low voltage modules (14) with first stage magnetic compression circuits (20) and magnetic assist inductors (28) with a common core (91), such that timing of the first stage magnetic switches (30b) is thereby synchronized. A bipolar second stage of magnetic compression (42) is coupled to the low voltage modules (14) through a bipolar pulse transformer (36) and a third stage of magnetic compression (44) is directly coupled to the second stage of magnetic compression (42). The low voltage assembly (12) includes pressurized boxes (117) for improving voltage standoff between the primary winding assemblies (34) and secondary winding (40) contained therein.

Cook, Edward G. (Livermore, CA); Birx, Daniel L. (Oakley, CA); Ball, Don G. (Livermore, CA)

1994-01-01T23:59:59.000Z

327

Fuel cell repeater unit including frame and separator plate  

DOE Patents (OSTI)

An example fuel cell repeater includes a separator plate and a frame establishing at least a portion of a flow path that is operative to communicate fuel to or from at least one fuel cell held by the frame relative to the separator plate. The flow path has a perimeter and any fuel within the perimeter flow across the at least one fuel cell in a first direction. The separator plate, the frame, or both establish at least one conduit positioned outside the flow path perimeter. The conduit is outside of the flow path perimeter and is configured to direct flow in a second, different direction. The conduit is fluidly coupled with the flow path.

Yamanis, Jean; Hawkes, Justin R; Chiapetta, Jr., Louis; Bird, Connie E; Sun, Ellen Y; Croteau, Paul F

2013-11-05T23:59:59.000Z

328

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

1999-05-04T23:59:59.000Z

329

CDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

1995-03-21T23:59:59.000Z

330

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 12 figs.

Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

1999-05-04T23:59:59.000Z

331

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 11 figures.

Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

1995-03-21T23:59:59.000Z

332

Extractant composition including crown ether and calixarene extractants  

DOE Patents (OSTI)

An extractant composition comprising a mixed extractant solvent consisting of calix[4] arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The DtBu18C6 may be present at from approximately 0.01M to approximately 0.4M, such as at from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present at from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The extractant composition further comprises an aqueous phase. The mixed extractant solvent may be used to remove cesium and strontium from the aqueous phase.

Meikrantz, David H. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Riddle, Catherine L. (Idaho Falls, ID); Law, Jack D. (Pocalello, ID); Peterman, Dean R. (Idaho Falls, ID); Mincher, Bruce J. (Idaho Falls, ID); McGrath, Christopher A. (Blackfoot, ID); Baker, John D. (Blackfoot, ID)

2009-04-28T23:59:59.000Z

333

Process simulation of refinery units including chemical reactors  

Science Journals Connector (OSTI)

Process simulation methods for design and operation of refinery units are well established as long as no chemical reactors are included. The feedstocks are divided into pseudo-components which enables calculation of phase equilibria and transport properties. When chemical reactors are present some chemical conversion takes place which obviously affects the nature of the pseudo-components and their properties. The stream leaving the reactor will not only be of a different composition than the stream entering the reactor but in addition, the pseudo-components making up the outlet stream will also have other physical properties than the ones in the inlet stream. These changes affect not only the reactor unit but also the simulation of the whole flow-sheet. The paper presents a detailed model for an adiabatic distillate hydrotreater which takes into account the elemental composition of the feed. A special simulation strategy has been developed to incorporate such reactor units into process simulators. Finally, the simulation strategy is illustrated for a hydrotreating plant.

Jens A. Hansen; Barry H. Cooper

1992-01-01T23:59:59.000Z

334

Utility of Megavoltage Fan-Beam CT for Treatment Planning in a Head-And-Neck Cancer Patient with Extensive Dental Fillings Undergoing Helical Tomotherapy  

SciTech Connect

The purpose of this study was to demonstrate the potential utility of megavoltage fan-beam computed tomography (MV-FBCT) for treatment planning in a patient undergoing helical tomotherapy for nasopharyngeal carcinoma in the presence of extensive dental artifact. A 28-year-old female with locally advanced nasopharyngeal carcinoma presented for radiation therapy. Due to the extensiveness of the dental artifact present in the oral cavity kV-CT scan acquired at simulation, which made treatment planning impossible on tomotherapy planning system, MV-FBCT imaging was obtained using the HI-ART tomotherapy treatment machine, with the patient in the treatment position, and this information was registered with her original kV-CT scan for the purposes of structure delineation, dose calculation, and treatment planning. To validate the feasibility of the MV-FBCT-generated treatment plan, an electron density CT phantom (model 465, Gammex Inc., Middleton, WI) was scanned using MV-FBCT to obtain CT number to density table. Additionally, both a 'cheese' phantom (which came with the tomotherapy treatment machine) with 2 inserted ion chambers and a generic phantom called Quasar phantom (Modus Medical Devices Inc., London, ON, Canada) with one inserted chamber were used to confirm dosimetric accuracy. The MV-FBCT could be used to clearly visualize anatomy in the region of the dental artifact and provide sufficient soft-tissue contrast to assist in the delineation of normal tissue structures and fat planes. With the elimination of the dental artifact, the MV-FBCT images allowed more accurate dose calculation by the tomotherapy system. It was confirmed that the phantom material density was determined correctly by the tomotherapy MV-FBCT number to density table. The ion chamber measurements agreed with the calculations from the MV-FBCT generated phantom plan within 2%. MV-FBCT may be useful in radiation treatment planning for nasopharyngeal cancer patients in the setting of extensive dental artifacts.

Yang, Claus; Liu Tianxiao; Jennelle, Richard L.; Ryu, Janice K.; Vijayakumar, Srinivasan; Purdy, James A. [Department of Radiation Oncology, University of California Davis School of Medicine, Sacramento, CA (United States); Chen, Allen M. [Department of Radiation Oncology, University of California Davis School of Medicine, Sacramento, CA (United States)], E-mail: allen.chen@ucdmc.ucdavis.edu

2010-07-01T23:59:59.000Z

335

Preliminary thermodynamic study for an efficient turbo-blower external combustion Rankine cycle  

Science Journals Connector (OSTI)

This research paper presents a preliminary thermodynamic study of an innovative power plant operating under a Rankine cycle fed by an external combustion system with ... a heat exchanger, to a carbon dioxide Rankine

Manuel Romero Gómez; Javier Romero Gómez; Ramón Ferreiro Garcia…

2014-08-01T23:59:59.000Z

336

ARM: Surface Radiation Measurement Quality Control testing, including climatologically configurable limits  

DOE Data Explorer (OSTI)

Surface Radiation Measurement Quality Control testing, including climatologically configurable limits

Hodges, Gary; Stoffel, Tom; Kutchenreiter, Mark; Kay, Bev; Habte, Aron; Ritsche, Michael; Morris, Victor; Anderberg, Mary

337

E-Print Network 3.0 - alginate scaffold including Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

created through a three step process which included: treatment... ; and exposure to a CaCl2 to crosslink the alginate sheets. Process variables included volume and concentra-...

338

E-Print Network 3.0 - actinides including cm Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary: of waste actinides. Such damage can be studied by many techniques, including heavy-ionfast neutron... were presented and proposed, including; Fundamental studies...

339

Electricity and Natural Gas Efficiency Improvements for Residential Gas  

NLE Websites -- All DOE Office Websites (Extended Search)

and Natural Gas Efficiency Improvements for Residential Gas and Natural Gas Efficiency Improvements for Residential Gas Furnaces in the U.S. Title Electricity and Natural Gas Efficiency Improvements for Residential Gas Furnaces in the U.S. Publication Type Report LBNL Report Number LBNL-59745 Year of Publication 2006 Authors Lekov, Alexander B., Victor H. Franco, Stephen Meyers, James E. McMahon, Michael A. McNeil, and James D. Lutz Document Number LBNL-59745 Publisher Lawrence Berkeley National Laboratory City Berkeley Abstract This paper presents analysis of the life-cycle costs for individual households and the aggregate energy and economic impacts from potential energy efficiency improvements in U.S. residential furnaces. Most homes in the US are heated by a central furnace attached to ducts for distributing heated air and fueled by natural gas. Electricity consumption by a furnace blower is significant, comparable to the annual electricity consumption of a major appliance. Since the same blower unit is also used during the summer to circulate cooled air in centrally air conditioned homes, electricity savings occur year round. Estimates are provided of the potential electricity savings from more efficient fans and motors. Current regulations require new residential gas-fired furnaces (not including mobile home furnaces) to meet or exceed 78% annual fuel utilization efficiency (AFUE), but in fact nearly all furnaces sold are at 80% AFUE or higher. The possibilities for higher fuel efficiency fall into two groups: more efficient non-condensing furnaces (81% AFUE) and condensing furnaces (90-96% AFUE). There are also options to increase the efficiency of the furnace blower. This paper reports the projected national energy and economic impacts of requiring higher efficiency furnaces in the future. Energy savings vary with climate, with the result that condensing furnaces offer larger energy savings in colder climates. The range of impacts for a statistical sample of households and the percent of households with net savings in life cycle cost are shown. Gas furnaces are somewhat unusual in that the technology does not easily permit incremental change to the AFUE above 80%. Achieving significant energy savings requires use of condensing technology, which yields a large efficiency gain (to 90% or higher AFUE), but has a higher cost. With respect to electricity efficiency design options, the ECM has a negative effect on the average LCC. The current extra cost of this technology more than offsets the sizable electricity savings.

340

Common Data Set 2011-2012 J Column heading for CIP categories to include now reads: CIP 2010 Categories to Include  

E-Print Network (OSTI)

Common Data Set 2011-2012 J Column heading for CIP categories to include now reads: CIP 2010 Categories to Include J CIP category 3 description now reads: Natural resources and conservation J CIP category 5 description now reads: Area, ethnic, and gender studies J CIP category 16 description now reads

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

INFLUENCE OF DESIGN AND OPERATING CONDITIONS ON UNDERFLOOR AIR DISTRIBUTION (UFAD) SYSTEM PERFORMANCE  

E-Print Network (OSTI)

zones. Variable speed fan coil units (VSFCU) provide air tounit (AHU) including an airside economizer, a chilled water cooling coil, and a relief fan.

2012-01-01T23:59:59.000Z

342

Thermal decay in underfloor air distribution (UFAD) systems: Fundamentals and influence on system performance  

E-Print Network (OSTI)

zones. Variable-speed fan coil units ( FCU) supply air tounit (AHU) including an economizer, chilled water cooling coil, hot water heating coil and supply fan.

Lee, Kwang Ho; Schiavon, Stefano; Bauman, Fred; Webster, Tom

2012-01-01T23:59:59.000Z

343

Simplified calculation method for design cooling loads in underfloor air distribution (UFAD) systems  

E-Print Network (OSTI)

the outlet side of fan coil units (FCU) served by variableunit (AHU) including a return air economizer, chilled water cooling coil, hot water heating coil and supply fan.

Schiavon, Stefano; Lee, Kwang Ho; Bauman, Fred; Webster, Tom

2010-01-01T23:59:59.000Z

344

INFLUENCE OF SUPPLY AIR TEMPERATURE ON UNDERFLOOR AIR DISTRIBUTION (UFAD) SYSTEM ENERGY PERFORMANCE  

E-Print Network (OSTI)

this study, perimeter fan coil unit (FCU) energy also addsvariable speed series fan coil unit. The FCU shuts off whenunit including an economizer, chilled water cooling coil, and supply fan.

2012-01-01T23:59:59.000Z

345

Composite materials and bodies including silicon carbide and titanium diboride and methods of forming same  

DOE Patents (OSTI)

Methods of forming composite materials include coating particles of titanium dioxide with a substance including boron (e.g., boron carbide) and a substance including carbon, and reacting the titanium dioxide with the substance including boron and the substance including carbon to form titanium diboride. The methods may be used to form ceramic composite bodies and materials, such as, for example, a ceramic composite body or material including silicon carbide and titanium diboride. Such bodies and materials may be used as armor bodies and armor materials. Such methods may include forming a green body and sintering the green body to a desirable final density. Green bodies formed in accordance with such methods may include particles comprising titanium dioxide and a coating at least partially covering exterior surfaces thereof, the coating comprising a substance including boron (e.g., boron carbide) and a substance including carbon.

Lillo, Thomas M.; Chu, Henry S.; Harrison, William M.; Bailey, Derek

2013-01-22T23:59:59.000Z

346

DOE Meeting Memorandum: Ex Parte Communications | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Meeting Memorandum: Ex Parte Communications Meeting Memorandum: Ex Parte Communications DOE Meeting Memorandum: Ex Parte Communications Big Ass Fans is headquartered in Lexington, Kentucky, and designs and manufactures a variety of fan models for commercial, industrial and residential use. BAF met with DOE to discuss the ongoing rulemaking process for the commercial and industrial fans and blowers energy conservation standards, docket EERE-2013-BT-STD-0006, and for residential ceiling fans energy conservation standards, docket number EERE-2012-BT-STD-0045. 6-4-13 BAF DOE Meeting Memorandum.pdf DOE Reduced Size.pdf More Documents & Publications Track C - Market-Driven Research Solutions Energy Savers Guide Critical Question #4: What are the Best Off-the-Shelf HVAC Solutions for Low-Load, High-Performance Homes and Apartments?

347

AMCA-Ex-Parte-Dec-23-2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30 30 West University Drive * Arlington Heights, IL 60004 * 847-394-0150 * www.amca.org TO: expartecommunications@hq.doe.gov (sent via email) FROM: Wade Smith, Executive Director, AMCA International DATE: December 23, 2011 RE: Memorandum Memorializing Ex Parte Communication, December 19, 2011 for DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods, Docket N o E ERE---2011---BT---DET---0045. Meeting Purpose: The meeting was requested by AMCA International to introduce the association's leadership, standards, and experience in developing fan standards to DOE; to learn more about the DOE process for developing regulations for fan efficiency standards; and to inform DOE on how commercial and industrial fan markets work.

348

DOE Meeting Memorandum: Ex Parte Communications | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Meeting Memorandum: Ex Parte Communications DOE Meeting Memorandum: Ex Parte Communications DOE Meeting Memorandum: Ex Parte Communications Big Ass Fans is headquartered in Lexington, Kentucky, and designs and manufactures a variety of fan models for commercial, industrial and residential use. BAF met with DOE to discuss the ongoing rulemaking process for the commercial and industrial fans and blowers energy conservation standards, docket EERE-2013-BT-STD-0006, and for residential ceiling fans energy conservation standards, docket number EERE-2012-BT-STD-0045. 6-4-13 BAF DOE Meeting Memorandum.pdf DOE Reduced Size.pdf More Documents & Publications Track C - Market-Driven Research Solutions Issue #3: HVAC Proper Installation Energy Savings: Over-Promising or Under-Delivering? Energy Savers Guide

349

All General Counsel Reports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 12, 2013 June 12, 2013 Fisher & Paykel Appliances: ENERGY STAR Referral (WA42T26GW1) DOE referred the matter of Fisher & Paykel Appliances residential clothes washer, model WA42T26GW1, to the EPA for appropriate action after DOE testing showed that the model does not meet the ENERGY STAR specification. June 10, 2013 DOE Meeting Memorandum: Ex Parte Communications Big Ass Fans is headquartered in Lexington, Kentucky, and designs and manufactures a variety of fan models for commercial, industrial and residential use. BAF met with DOE to discuss the ongoing rulemaking process for the commercial and industrial fans and blowers energy conservation standards, docket EERE-2013-BT-STD-0006, and for residential ceiling fans energy conservation standards, docket number

350

SBIR/STTR FY15 Release 1 Awards Announced-Includes Fuel Cell...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

FY15 Release 1 Awards Announced-Includes Fuel Cell Catalyst and Hydrogen Contamination Detection R&D SBIRSTTR FY15 Release 1 Awards Announced-Includes Fuel Cell Catalyst and...

351

SBIR/STTR Release 2 Topics Announced-Includes Hydrogen and Fuel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Release 2 Topics Announced-Includes Hydrogen and Fuel Cells SBIRSTTR Release 2 Topics Announced-Includes Hydrogen and Fuel Cells October 31, 2014 - 12:05pm Addthis The 2015 Small...

352

E-Print Network 3.0 - anti-platelet therapy including Sample...  

NLE Websites -- All DOE Office Websites (Extended Search)

management including exercise, cognitive behavioral therapy 3. ... Source: Messersmith, Phillip B.- Department of Materials Science and Engineering, Northwestern University...

353

Photovoltaic Device Including A Boron Doping Profile In An I-Type Layer  

DOE Patents (OSTI)

A photovoltaic cell for use in a single junction or multijunction photovoltaic device, which includes a p-type layer of a semiconductor compound including silicon, an i-type layer of an amorphous semiconductor compound including silicon, and an n-type layer of a semiconductor compound including silicon formed on the i-type layer. The i-type layer including an undoped first sublayer formed on the p-type layer, and a boron-doped second sublayer formed on the first sublayer.

Yang, Liyou (Lawrenceville, NJ)

1993-10-26T23:59:59.000Z

354

NREL/Ventyx Utility Rates: What is included? | OpenEI Community  

Open Energy Info (EERE)

NREL/Ventyx Utility Rates: What is included? NREL/Ventyx Utility Rates: What is included? Home > Groups > Utility Rate Does anyone know what pieces of electric rates are included in the NREL/Ventyx database of rates by utility, i.e. is it supply only or does the file include supply, transmission & distribution costs? Thanks! Submitted by Vbugnion on 27 February, 2013 - 16:25 1 answer Points: 1 Hi Vbugnion, Just to clarify, you're not asking about the OpenEI utility rates, but rather the Ventyx rates found here: http://developer.nrel.gov/doc/api/georeserv/service/utility_rates If so, then the Ventyx rates do include all bundled rates (which includes supply, trans, and distr costs). However, there's a small but non-zero possibility that a few energy-only or delivery-only rates may not have been cleaned

355

DOE Order 440. 1 B: Worker Protection Program for DOE (Including NNSA)  

NLE Websites -- All DOE Office Websites (Extended Search)

0. 1 B: Worker Protection Program for DOE (Including 0. 1 B: Worker Protection Program for DOE (Including NNSA) Federal Employees DOE Order 440. 1 B: Worker Protection Program for DOE (Including NNSA) Federal Employees Stakeholders: DOE and NNSA employees Scope: DOE Order 440.1 B establishes the framework for an effective worker protection program that will reduce or prevent injuries, illnesses, and accidental losses by providing Department of Energy, including National Nuclear Security Administration (NNSA), Federal workers with a safe and healthful workplace. Summary: Among the requirements of DOE Order 440.1 B, the Department must provide its employees, including NNSA, a number of protections relating to whistle blowing guidelines. The relevant section of requirements includes: 4. REQUIREMENTS. DOE elements must:

356

Photovoltaic module kit including connector assembly for non-penetrating array installation  

DOE Patents (OSTI)

A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Danning, Matt (Oakland, CA); Culligan, Matthew (Berkeley, CA)

2011-11-22T23:59:59.000Z

357

Photovoltaic module kit including connector assembly for non-penetrating array installation  

DOE Patents (OSTI)

A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

2012-10-23T23:59:59.000Z

358

Photovoltaic module kit including connector assembly for non-penetrating array installation  

DOE Patents (OSTI)

A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assempbled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting regions of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized slidably receive the male fastener, with all of the connector heads being identical.

Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

2013-12-31T23:59:59.000Z

359

E-Print Network 3.0 - anu including biomedical Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Centre... -Europe Meeting (ASEM) process. Some of her recent publications include "EU-ASEAN Relations and Policy Learning... to ASEAN Economic Community - Is ASEAN moving towards...

360

E-Print Network 3.0 - approach including plasma Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

plasmas confined... to mi crocavities has provided a pathway to new optoelectronic devices, including hybrid Source: Shyy, Wei - Department of Aerospace Engineering,...

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

E-Print Network 3.0 - abdominal surgery including Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

reality allows... , a virtual reality laparoscopic surgery simulator that includes a brand new educational component, to assist... . Virtual reality simulators for...

362

E-Print Network 3.0 - african countries including Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

biofuel drive raises risk of eviction for African farmers Summary: by next year. In Africa, countries including Malawi, Mali, Mauritius, Nigeria, Senegal, South Africa... to...

363

Custom Detector Technology LASP satellite instruments include a wide range of technology,  

E-Print Network (OSTI)

Custom Detector Technology LASP satellite instruments include a wide range of technology, including particles, electric fields, and dust particles in space. Low-noise detectors are critical technology for our Extremely low-noise CCDs and intensified CCDs have flown on SDO for observing solar EUV and on AIM

Mojzsis, Stephen J.

364

Neutron Star Matter Including Delta Isobars Guang-Zhou Liu1,2  

E-Print Network (OSTI)

Neutron Star Matter Including Delta Isobars Guang-Zhou Liu1,2 , Wei Liu1 and En-Guang Zhao2 1 a new phase structure of neutron star matter including nucleons and delta isobars is presented. Particle fractions populated and pion condensations in neutron star matter are investgated in this model

Xu, Ren-Xin

365

Hybrid approach for including electronic and nuclear quantum effects in molecular dynamics simulations of hydrogen transfer  

E-Print Network (OSTI)

Hybrid approach for including electronic and nuclear quantum effects in molecular dynamics January 2001 A hybrid approach for simulating proton and hydride transfer reactions in enzymes coefficient and to investigate the real-time dynamics of reactive trajectories. This hybrid approach includes

Hammes-Schiffer, Sharon

366

Red-Tide Research Summarized to 1964 Including an Annotated Bibliography  

E-Print Network (OSTI)

535^ Red-Tide Research Summarized to 1964 Including an Annotated Bibliography By George A, Harold E. Crowther, Acting Director Red-Tide Research Summarized to 1964 Including an Annotated Historical 2 General conditions during red-tide outbreaks 3 Temperature 3 Salinity 3 Rainfall 4 Wind 4 Light

367

Life Cycle environmental Assessment (LCA) of sanitation systems including sewerage: Case of vertical  

E-Print Network (OSTI)

Life Cycle environmental Assessment (LCA) of sanitation systems including sewerage: Case The article presents the application of Life Cycle Assessment (LCA) to a complete sanitation system including the sewer network. It first describes the LCA hypothesis which concerns two types of waste water

Paris-Sud XI, Université de

368

OFFICE USE ONLY: Date Entered: App Rating: Complete Incomplete Documents Included  

E-Print Network (OSTI)

OFFICE USE ONLY: Date Entered: App Rating: Complete Incomplete Documents Included: Declaration/ Assessment APPLICATION INSTRUCTIONS: 1. All supporting documentation must be included with the application printed from BearTracks 2. Have you signed the Declaration and Consent form on the last page

MacMillan, Andrew

369

Introduction Apis mellifera L. is native to Europe, Africa, and Asia (including Saudi  

E-Print Network (OSTI)

Introduction Apis mellifera L. is native to Europe, Africa, and Asia (including Saudi Arabia, Iran migrations and introductions (Ruttner, 1988). Apis mellifera includes about two dozen subspecies bee (Apis mellifera L.) populations from the USA Allen L Szalanski1* and Roxane M Magnus1 1 Social

Szalanski, Allen L.

370

What are the symptoms of flu? Symptoms include sudden onset of  

E-Print Network (OSTI)

What are the symptoms of flu? · Symptoms include sudden onset of: o fever/chills o cough o muscle lasting 5 or more days (measured with a thermometer; 37.0 Celsius is normal) · Coughing up blood that improve but then return with fever and worse cough Those in high risk groups including pregnant women

Ellis, Randy

371

Small-signal dynamic model of a micro-grid including conventional and electronically  

E-Print Network (OSTI)

Small-signal dynamic model of a micro-grid including conventional and electronically interfaced-signal modelling of a micro-grid system that includes conventional (rotating machine) and electronically interfaced deviations in the overall system model and provides a methodology for the analysis of autonomous micro-grid

Lehn, Peter W.

372

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Motors Electric Motors Sign up for e-mail updates on regulations for this and other products The Department of Energy (DOE) has regulated the energy efficiency level of electric motors since 1997. Electric motors convert electrical energy to rotating mechanical energy. When operating, the electrical energy is transferred as useful mechanical energy to some driven device such as a fan, pump, blower, compressor, or conveyor. The Energy Policy and Conservation Act (EPCA), as amended by the Energy Independence and Security Act of 2007 (EISA 2007), covers three broad categories of electric motors: general purpose, definite purpose and special purpose. These broad categories include a variety of motors including single-speed, continuous-duty polyphase motors with voltages not greater than 600 volts; motors with or without mounting feet; motors built in a T- or U-frame; motors built with synchronous speeds of 3600, 1800, 1200, or 900 rpm (two, four, six, or eight poles, respectively); National Electrical Manufacturers Association (NEMA) Design B motors from 1 to 500 horsepower, NEMA Design A and C motors from 1 to 200 horsepower; and motors that are close-coupled pump or vertical solid-shaft normal thrust motors.

373

T-603: Mac OS X Includes Some Invalid Comodo Certificates | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

03: Mac OS X Includes Some Invalid Comodo Certificates 03: Mac OS X Includes Some Invalid Comodo Certificates T-603: Mac OS X Includes Some Invalid Comodo Certificates April 15, 2011 - 1:46am Addthis PROBLEM: Mac OS X Includes Some Invalid Comodo Certificates PLATFORM: For Mac OS X Server v10.5.8, Mac OS X v10.5.8, Mac OS X v10.6.7 and Mac OS X Server v10.6.7 ABSTRACT: The operating system includes some invalid certificates. The vulnerability is due to the invalid certificates and not the operating system itself. Other browsers, applications, and operating systems are affected. reference LINKS: SecurityTracker Alert ID: 1025362 APPLE-SA-2011-04-14-4 Security Update 2011-002 Apple Support Downloads IMPACT ASSESSMENT: High Discussion: A partner of Comodo with Registration Authority capabilities suffered an internal security breach and the attacker caused seven certificates to be

374

Property:Number of Plants Included in Planned Estimate | Open Energy  

Open Energy Info (EERE)

Plants Included in Planned Estimate Plants Included in Planned Estimate Jump to: navigation, search Property Name Number of Plants Included in Planned Estimate Property Type String Description Number of plants included in the estimate of planned capacity per GEA Pages using the property "Number of Plants Included in Planned Estimate" Showing 21 pages using this property. A Alaska Geothermal Region + 3 + C Cascades Geothermal Region + 1 + Central Nevada Seismic Zone Geothermal Region + 4 + G Gulf of California Rift Zone Geothermal Region + 7 + H Hawaii Geothermal Region + 1 + Holocene Magmatic Geothermal Region + 4 + I Idaho Batholith Geothermal Region + 1 + N Northern Basin and Range Geothermal Region + 9 + Northern Rockies Geothermal Region + 0 + Northwest Basin and Range Geothermal Region + 6 +

375

Systems and strippable coatings for decontaminating structures that include porous material  

DOE Patents (OSTI)

Methods of removing contaminant matter from porous materials include applying a polymer material to a contaminated surface, irradiating the contaminated surface to cause redistribution of contaminant matter, and removing at least a portion of the polymer material from the surface. Systems for decontaminating a contaminated structure comprising porous material include a radiation device configured to emit electromagnetic radiation toward a surface of a structure, and at least one spray device configured to apply a capture material onto the surface of the structure. Polymer materials that can be used in such methods and systems include polyphosphazine-based polymer materials having polyphosphazine backbone segments and side chain groups that include selected functional groups. The selected functional groups may include iminos, oximes, carboxylates, sulfonates, .beta.-diketones, phosphine sulfides, phosphates, phosphites, phosphonates, phosphinates, phosphine oxides, monothio phosphinic acids, and dithio phosphinic acids.

Fox, Robert V. (Idaho Falls, ID); Avci, Recep (Bozeman, MT); Groenewold, Gary S. (Idaho Falls, ID)

2011-12-06T23:59:59.000Z

376

Study of the effects of ambient conditions upon the performance of fan powered, infrared, natural gas burners. Quarterly technical progress report, October 1, 1995--December 31, 1995  

SciTech Connect

Infrared burner is a surface combustor that elevates the temperature of the burner head to a radiant condition. Applications of radiant burners includes boilers, air heaters, deep fat fryers, process heaters, and immersion heaters. On reason for the present interest in this type of burner is its low NO{sub x} emissions, which is attributed to the fact that a large proportion of the combustion heat is given out as radiation from the burner surface, which results in relatively low gas temperature in the combustion zone compared to that of a conventional free-flame burner. As a consequence, such burners produce less NO{sub x}, mainly by the so-called prompt-NO mechanism. A porous radiant burner testing facility was built, consisting of spectral radiance as well as flue gas composition measurements. Measurement capabilities were tested using methane; results were consistent with literature.

Bai, Tiejun; Yeboah, Y.D.; Sampath, R.

1996-01-01T23:59:59.000Z

377

The Derivation of Efficiency Equation of the Prototype of Pico Wind Turbine Produces the Electricity  

Science Journals Connector (OSTI)

This research has purposed to derive efficiency equation of the prototype of pico wind turbine produces the electricity (PPWTPE). By using a ventilating fan of 12 cm diameter as a blower, at rotating speed of 2,880 rpm. Blower blew the wind to PPWTPE of alternator. The wind turbine of alternator modified from magnet motor of central processing unit fan of computer. Magnet motor composes of the cylindrical magnet 30 mm diameters, magnetic field intensity of 70 mT, 7 propellers of 74 mm diameter. These components were enclosed at the center of wind turbine rotate around copper line no.40 as 4 coils, each coil 550 turns. It shows that, the distance between blower and the pico wind turbine of 8 cm obtained the wind speed 7.14 m/s, the PPWTPE rotated of 855 rpm. The magnet was rotated around the 4 coils and induced the accelerating voltage of 4.9 volts and accelerating current 17.52 mA in 4 coils. The induced accelerating current from 4 coils sent AC signal to bridge rectifier circuit converts AC to DC obtained voltage of 3.60 V and DC current of 14.90 mA, and the 7 LED lamps were bright. By using a derived efficiency equation of the PPWTPE, the PPWTPE has estimate efficiency of 9%.

S. Jugsujinda; P. Jugsujinda; T. Seetawan

2012-01-01T23:59:59.000Z

378

Energy Department Expands Gas Gouging Reporting System to Include 1-800  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Expands Gas Gouging Reporting System to Include Expands Gas Gouging Reporting System to Include 1-800 Number: 1-800-244-3301 Energy Department Expands Gas Gouging Reporting System to Include 1-800 Number: 1-800-244-3301 September 6, 2005 - 9:50am Addthis Washington, DC - Energy Secretary Samuel W. Bodman announced today that the Department of Energy has expanded its gas gouging reporting system to include a toll-free telephone hotline. The hotline is available to American consumers starting today. "While we've largely seen the best of American generosity and unity throughout the recovery effort, we recognize that there are some bad actors that may try to take advantage of the situation. Consumers are our first line of defense in guarding against gas price gouging. I can assure you, our Administration - from the President down - takes this issue very

379

Counselling Psychology Practicum The Counselling Psychology program includes two practicum placements. These placements allow you to  

E-Print Network (OSTI)

Counselling Psychology Practicum The Counselling Psychology program includes two practicum development in real counselling settings. The general goal of the Counselling Psychology Practica. Students in the Master of Education (Counselling Psychology) program are responsible for making their own

Morris, Joy

380

A simulation study of the solar wind including the solar rotation effect  

Science Journals Connector (OSTI)

An axisymmetric solar wind structure including the solar rotation effect is studied by the method of MHD computer simulation. For the case of the radial magnetic field configuration, the simulation result is fair...

H. Washimi; T. Sakurai

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Data and analysis on energy usage included: Taking readings on energy each minute  

E-Print Network (OSTI)

Appendix B Data and analysis on energy usage included: § Taking readings on energy each minute § 14 usage at the schools we monitored. The usage is compared to the PIER target, Title 24, and Ashrae 90

382

Automated solar collector installation design including ability to define heterogeneous design preferences  

DOE Patents (OSTI)

Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre -defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

2014-04-29T23:59:59.000Z

383

Automated solar collector installation design including ability to define heterogeneous design preferences  

DOE Patents (OSTI)

Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

2013-01-08T23:59:59.000Z

384

AMO Issues Request for Information on Clean Energy Manufacturing Topics, Including Fuel Cell and Hydrogen Applications  

Energy.gov (U.S. Department of Energy (DOE))

The AMO seeks information on mid-Technology Readiness Level R&D needs, market challenges, supply chain challenges, and shared facility needs addressing clean energy manufacturing topics, including the fuel cell and hydrogen sectors.

385

Modeling the Interaction between the Atmospheric and Oceanic Boundary Layers, Including a Surface Wave Layer  

Science Journals Connector (OSTI)

The interaction between the atmospheric and oceanic boundary layers is simulated by solving a closed system of equations including equations of motion, turbulent kinetic energy (TKE), turbulent exchange coefficient (TEC), expressions for air and ...

Le Ngoc Ly

1986-08-01T23:59:59.000Z

386

Diffractive laser beam homogenizer including a photo-active material and method of fabricating the same  

SciTech Connect

A method of manufacturing a plurality of diffractive optical elements includes providing a partially transmissive slide, providing a first piece of PTR glass, and directing first UV radiation through the partially transmissive slide to impinge on the first piece of PTR glass. The method also includes exposing predetermined portions of the first piece of PTR glass to the first UV radiation and thermally treating the exposed first piece of PTR glass. The method further includes providing a second piece of PTR glass and directing second UV radiation through the thermally treated first piece of PTR glass to impinge on the second piece of PTR glass. The method additionally includes exposing predetermined portions of the second piece of PTR glass to the second UV radiation, thermally treating the exposed second piece of PTR glass, and repeating providing and processing of the second piece of PTR glass using additional pieces of PTR glass.

Bayramian, Andy J; Ebbers, Christopher A; Chen, Diana C

2014-05-20T23:59:59.000Z

387

FEMP Expands ESPC ENABLE Program to Include More Energy Conservation Measures  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy's Federal Energy Management Program announced the expansion of the Energy Savings Performance Contract ENABLE program to include two new energy conservation measures.

388

E-Print Network 3.0 - approach including back-translation Sample...  

NLE Websites -- All DOE Office Websites (Extended Search)

include the back-translation, is always available for later inspection.) They can... safeguard against translation errors, we supply a back-translation, or re-translation of the...

389

includes gravity, there are other interesting consequences of this line of argument. One  

E-Print Network (OSTI)

includes gravity, there are other interesting consequences of this line of argument. One f there is any truth to the adage that `practice makes perfect', we should cer- tainly be near

Murray, Richard

390

Mineral balances, including in drinking water, estimated for Merced County dairy herds  

E-Print Network (OSTI)

of daily mineral intake, drinking-water mineral contributionND Total daily intake, including minerals in drinking water.mineral contents in drinking water and daily drinking-water

Castillo, Alejandro R Dr.; Santos, Jose Eduardo P.; Tabone, Tom J.

2007-01-01T23:59:59.000Z

391

Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case  

Open Energy Info (EERE)

Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case Study) (Webinar) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case Study) (Webinar) Focus Area: Renewable Energy Topics: System & Application Design Website: www.leonardo-energy.org/webinar-introduction-small-scale-wind-energy-s Equivalent URI: cleanenergysolutions.org/content/introduction-small-scale-wind-energy- Language: English Policies: Deployment Programs DeploymentPrograms: Project Development This video teaches the viewer about wind turbines and RETscreen's wind module, which can be used to project the cost and production of a wind

392

The American Recovery and Reinvestment Act Includes $4.5 billion for the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The American Recovery and Reinvestment Act Includes $4.5 billion The American Recovery and Reinvestment Act Includes $4.5 billion for the Office of Electricity Delivery and Energy Reliability The American Recovery and Reinvestment Act Includes $4.5 billion for the Office of Electricity Delivery and Energy Reliability February 25, 2009 - 4:52pm Addthis President Barack Obama signed into law the American Recovery and Reinvestment Act of 2009 (P.L.111-5). The $787 billion economic recovery package represents the largest and most ambitious effort to stimulate the economy in United States history. The Department of Energy (DOE) will be responsible for implementing over $38 billion of the $787 billion package. Of the DOE total, $4.5 Billion is allotted to the Office of Electricity Delivery and Energy Reliability. As outlined in the legislation, these funds are an investment in a

393

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

40.1B, WORKER PROTECTION PROGRAM FOR DOE 40.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES The familiar level of this module is divided into two sections. In the first section, we will discuss the objective, requirements, and the responsibilities assigned to the heads of field elements. In the second section, we will discuss the content of attachment 1, Functional Area Requirements. We have provided examples and a practice to help familiarize you with the material. The practice will also help prepare you for the criterion test. DOE Order Self Study Modules - DOE O 440.1B, Worker Protection Management for DOE (Including the National Nuclear Security Administration) Federal Employees

394

1) What are the current and future communications needs of utilities, including  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(1) What are the current and future communications needs of utilities, including for the (1) What are the current and future communications needs of utilities, including for the deployment of new Smart Grid applications, and how are these needs being met? The current communication needs of SCE include: telephony, data, video, voice dispatch, mobile data, grid monitoring, grid control, tele-protection, customer communication, load management, automated meter reading, and collaboration capabilities ranging from virtual meetings to e-learning. SCE is using a combination of private, leased, and shared telecommunication networks to support these requirements. Those applications that require high availability, low latency, and stringent security rely on a private telecommunications network (SCEnet). A combination of transport media are

395

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES The familiar level of this module is divided into two sections. In the first section, we will discuss the objective, requirements, and the responsibilities assigned to the heads of field elements. In the second section, we will discuss the content of attachment 1, Functional Area Requirements. We have provided examples and a practice to help familiarize you with the material. The practice will also help prepare you for the criterion test. DOE Order Self Study Modules - DOE O 440.1B, Worker Protection Management for DOE (Including the National Nuclear Security Administration) Federal

396

C3E also includes a network of leaders from the public, private, non-profit  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

C3E also includes a network of leaders from the public, private, non-profit, C3E also includes a network of leaders from the public, private, non-profit, and academic sectors who support advocacy, research, scholarships, hands-on training, funding, and networking opportunities to prepare and inspire young women to enter and thrive in STEM fields. C3E Network participants have pledged many types of commitments, from highlighting female role models to creating hands-on activities for young girls. Ongoing activities include: * Filming and featuring women in clean energy fields on online / TV outlets (Earth Day Network); * Designing pilot projects and expanding Young Women's Conferences at DOE's

397

Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience  

NLE Websites -- All DOE Office Websites (Extended Search)

Including Alternative Resources Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience Jenny Heeter and Lori Bird Technical Report NREL/TP-6A20-55979 November 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience Jenny Heeter and Lori Bird Prepared under Task No. SAO9.3110

398

Force measuring valve assemblies, systems including such valve assemblies and related methods  

DOE Patents (OSTI)

Methods of evaluating a fluid condition may include stroking a valve member and measuring a force acting on the valve member during the stroke. Methods of evaluating a fluid condition may include measuring a force acting on a valve member in the presence of fluid flow over a period of time and evaluating at least one of the frequency of changes in the measured force over the period of time and the magnitude of the changes in the measured force over the period of time to identify the presence of an anomaly in a fluid flow and, optionally, its estimated location. Methods of evaluating a valve condition may include directing a fluid flow through a valve while stroking a valve member, measuring a force acting on the valve member during the stroke, and comparing the measured force to a reference force. Valve assemblies and related systems are also disclosed.

DeWall, Kevin George (Pocatello, ID); Garcia, Humberto Enrique (Idaho Falls, ID); McKellar, Michael George (Idaho Falls, ID)

2012-04-17T23:59:59.000Z

399

Fabrication of contacts for silicon solar cells including printing burn through layers  

DOE Patents (OSTI)

A method for fabricating a contact (240) for a solar cell (200). The method includes providing a solar cell substrate (210) with a surface that is covered or includes an antireflective coating (220). For example, the substrate (210) may be positioned adjacent or proximate to an outlet of an inkjet printer (712) or other deposition device. The method continues with forming a burn through layer (230) on the coating (220) by depositing a metal oxide precursor (e.g., using an inkjet or other non-contact printing method to print or apply a volume of liquid or solution containing the precursor). The method includes forming a contact layer (240) comprising silver over or on the burn through layer (230), and then annealing is performed to electrically connect the contact layer (240) to the surface of the solar cell substrate (210) through a portion of the burn through layer (230) and the coating (220).

Ginley, David S; Kaydanova, Tatiana; Miedaner, Alexander; Curtis, Calvin J; Van Hest, Marinus Franciscus Antonius Maria

2014-06-24T23:59:59.000Z

400

Air Tightness of New U.S. Houses: A Preliminary Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Tightness of New U.S. Houses: A Preliminary Report Tightness of New U.S. Houses: A Preliminary Report Title Air Tightness of New U.S. Houses: A Preliminary Report Publication Type Report LBNL Report Number LBNL-48671 Year of Publication 2002 Authors Sherman, Max H., and Nance Matson Abstract Most dwellings in the United States are ventilated primarily through leaks in the building shell (i.e., infiltration) rather than by whole-house mechanical ventilation systems. Consequently, quantification of envelope air-tightness is critical to determining how much energy is being lost through infiltration and how much infiltration is contributing toward ventilation requirements. Envelope air tightness and air leakage can be determined from fan pressurization measurements with a blower door. Tens of thousands of unique fan pressurization measurements have been made of U.S. dwellings over the past decades. LBNL has collected the available data on residential infiltration into its Residential Diagnostics Database, with support from the U.S. Department of Energy. This report documents the envelope air leakage section of the LBNL database, with particular emphasis on new construction. The work reported here is an update of similar efforts carried out a decade ago, which used available data largely focused on the housing stock, rather than on new construction. The current effort emphasizes shell tightness measurements made on houses soon after they are built. These newer data come from over two dozen datasets, including over 73,000 measurements spread throughout a majority of the U.S. Roughly one-third of the measurements are for houses identified as energy-efficient through participation in a government or utility program. As a result, the characteristics reported here provide a quantitative estimate of the impact that energy-efficiency programs have on envelope tightness in the US, as well as on trends in construction.

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Two-dimensional numerical methods in electromagnetic hypersonics including fully coupled Maxwell equations  

E-Print Network (OSTI)

the magnetic field source (solenoid or permanent magnet). To test the technique, we show the results obtainedTwo-dimensional numerical methods in electromagnetic hypersonics including fully coupled Maxwell Keplerlaan 1, 2200 AG Noordwijk, The Netherlands We describe a numerical technique for solving the coupled

D'Ambrosio, Domenic

402

1. INTRODUCTION Bridge engineering is not only about designing but also includes "looking after" and maintain-  

E-Print Network (OSTI)

1. INTRODUCTION Bridge engineering is not only about designing but also includes "looking after" and maintain- ing the service-life of bridges. In the UK, after a period of relative neglect in the 1970s there was a growing awareness of the necessity to safeguard and maintain the stock of bridges as part of the national

403

Asymptotic stability of ground states in 3D nonlinear Schrodinger equation including subcritical cases  

E-Print Network (OSTI)

Asymptotic stability of ground states in 3D nonlinear SchrË?odinger equation including subcritical general encompassing for the first time both subcritical and supercritical (in L 2 ) nonlinearities. We #12; The main contribution of our result is to allow for subcritical and critical (L 2

404

Asymptotic stability of ground states in 3D nonlinear Schrodinger equation including subcritical cases  

E-Print Network (OSTI)

Asymptotic stability of ground states in 3D nonlinear Schr¨odinger equation including subcritical general encompassing for the first time both subcritical and supercritical (in L2 ) nonlinearities. We result is to allow for subcritical and critical (L2 ) nonlinearities, 0

Kirr, Eduard-Wilhelm

405

Asymptotic stability of ground states in 2D nonlinear Schrodinger equation including subcritical cases  

E-Print Network (OSTI)

Asymptotic stability of ground states in 2D nonlinear Schr¨odinger equation including subcritical encompassing for the first time both subcritical and supercrit- ical (in L2 ) nonlinearities. We study) = ei g(s), R. (1.4) The equation has important applications in statistical physics, optics and water

406

Asymptotic stability of ground states in 2D nonlinear Schrodinger equation including subcritical cases  

E-Print Network (OSTI)

Asymptotic stability of ground states in 2D nonlinear Schr¨odinger equation including subcritical general encompassing for the first time both subcritical and supercritical (in L2 ) nonlinearities. We physics, optics and water waves. For g(s) = s3 , it describes certain limiting behavior of Bose

Zarnescu, Arghir Dani

407

The efficient frontier for a portfolio that includes one risk-free asset  

Science Journals Connector (OSTI)

This paper presents a description of the efficient frontier of a portfolio composed by three assets, including a risk-free asset. We use a data analysis method to obtain two classes of assets and then we estimate the risk of each asset corresponding ... Keywords: efficient frontier, optimization, portfolio selection, principal component analysis, risk estimation

Florentin Serban; Maria Viorica Stefanescu; Silvia Dedu

2011-07-01T23:59:59.000Z

408

MAC-Kaust Project P1 CO2 Sequestration Modeling of CO2 sequestration including parameter  

E-Print Network (OSTI)

MAC-Kaust Project P1 ­ CO2 Sequestration Modeling of CO2 sequestration including parameter identification and numerical simulation M. Brokate, O. A. PykhteevHysteresis aspects of CO2 sequestration modeling K-H. Hoffmann, N. D. Botkin Objectives and methods of CO2 sequestration There is a popular belief

Turova, Varvara

409

Functional designed to include surface effects in self-consistent density functional theory R. Armiento1,  

E-Print Network (OSTI)

Functional designed to include surface effects in self-consistent density functional theory R 2005 We design a density-functional-theory DFT exchange-correlation functional that enables an accurate density functional theory1 DFT is a method for electronic structure calculations of unparalleled

Armiento, Rickard

410

Office of River Protection Looks Back on 2014 Achievements, Including Tank Retrieval Progress  

Energy.gov (U.S. Department of Energy (DOE))

RICHLAND, Wash. – In 2014, EM’s Office of River Protection (ORP) marked several accomplishments at the Hanford site, including continuing efforts to resolve remaining technical issues with the Waste Treatment and Immobilization Plant (WTP); restarting operations of the 242-A Evaporator; establishing waste acceptance limits for WTP; and continuing progress in waste tank retrievals.

411

Breakfast Pastry Platters Includes a variety of scones, muffins, fruit and cheese Danish and cinnamon rolls.  

E-Print Network (OSTI)

Breakfast Breakfast Pastry Platters Includes a variety of scones, muffins, fruit and cheese Danish Fruit Tarts, Mini Lemon Tarts and Cream Puffs. (Minimum order 10) ........... each pastry | $2.50 Quiche.) ............................................................................each quiche | $30 Fresh Fruit Salad An assortment of fresh melon, bananas, pineapple, grapes

Liberzon, Daniel

412

What measures climate? A variety of variables including their variability and extreme values determine climate for  

E-Print Network (OSTI)

climate zones? The sun is the ultimate power source for the climate "machine". The uneven distribution conditions. Typical variables to consider are temperature (maximum, miniumum), precipitation (includes rain, sleet, snow, hail, etc), sunlight/cloudiness, wind, humidity, ice cover, sea temperature, etc... Many

Allan, Richard P.

413

Solar Energy Education. Home economics: teacher's guide. Field test edition. [Includes glossary  

SciTech Connect

An instructional aid is provided for home economics teachers who wish to integrate the subject of solar energy into their classroom activities. This teacher's guide was produced along with the student activities book for home economics by the US Department of Energy Solar Energy Education. A glossary of solar energy terms is included. (BCS)

Not Available

1981-06-01T23:59:59.000Z

414

Solar Energy Education. Industrial arts: teacher's guide. Field test edition. [Includes glossary  

SciTech Connect

An instructional aid is presented which integrates the subject of solar energy into the classroom study of industrial arts. This guide for teachers was produced in addition to the student activities book for industrial arts by the USDOE Solar Energy Education. A glossary of solar energy terms is included. (BCS)

Not Available

1981-05-01T23:59:59.000Z

415

Confirmed speakers include: THE GLOBAL ROLE OF VIRUSES IN BLOOM TERMINATION, BIODIVERSITY AND MARINE ECOLOGY  

E-Print Network (OSTI)

IN BLOOM TERMINATION, BIODIVERSITY AND MARINE ECOLOGY GUNNAR BRATBAK ­ University of Bergen, NorwayConfirmed speakers include: THE GLOBAL ROLE OF VIRUSES IN BLOOM TERMINATION, BIODIVERSITY AND MARINE ECOLOGY GUNNAR BRATBAK ­ University of Bergen, Norway COLLECTION, PROCESSING AND PRESERVATION

Wilhelm, Steven W.

416

Worker Protection Program for DOE (Including the National Nuclear Security Administration) Federal Employees  

Directives, Delegations, and Requirements

The Order establishes the framework for an effective worker protection program that will reduce or prevent injuries, illnesses, and accidental losses by providing Department of Energy (DOE), including National Nuclear Security Administration (NNSA), Federal workers with a safe and healthful workplace. Cancels DOE O 440.1A. Certified 6/17/2011. Canceled by DOE O 440.1B Chg 1.

2007-05-17T23:59:59.000Z

417

Accounting for the Energy Consumption of Personal Computing Including Portable Devices  

E-Print Network (OSTI)

Accounting for the Energy Consumption of Personal Computing Including Portable Devices Pavel.S.A vinod.namboodiri@wichita.edu ABSTRACT In light of the increased awareness of global energy consumption the share of energy consumption due to these equipment over the years, these have rarely characterized

Namboodiri, Vinod

418

EARTH SCIENCESEARTH SCIENCESEARTH SCIENCES This major includes a spectrum of disciplines focused on understanding the  

E-Print Network (OSTI)

EARTH SCIENCESEARTH SCIENCESEARTH SCIENCES This major includes a spectrum of disciplines focused this understanding to read the record of earth history written in rocks and sediments, and on developing models by humans. Opportunities for Students Sigma Gamma Epsilon: The Omega Chapter of the national honorary earth

Krylov, Anna I.

419

Your membership includes: S10health Fitness Centre; Group Fitness Classes; Swimming Pool,  

E-Print Network (OSTI)

Your membership includes: S10health Fitness Centre; Group Fitness Classes; Swimming Pool, Sauna Standard Price Concessions* (at Off Peak times only) Swimming £4.00 £3.00 Group Fitness Classes (1 hour/45.sport-sheffield.com Support line: 0114 222 6996 #12;Pool Timetable 11th June ­ 23rd September 2012 The Matrix bouldering wall

Li, Yi

420

POLITICAL SCIENCE 2013 SCHOLARSHIP APPLICATION (Includes Alumni, Brazil, Francis, Glickman, Hubbard, Young, and Rinn Scholarships)  

E-Print Network (OSTI)

POLITICAL SCIENCE 2013 SCHOLARSHIP APPLICATION (Includes Alumni, Brazil, Francis, Glickman, Hubbard. _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ Please have a member of the SJSU Political Science faculty who is willing to provide a reference sign this application. Faculty sponsor's signature: Applicant's signature: You can apply for as many Political Science

Su, Xiao

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Improved One-dimensional Analysis of CMOS Photodiode Including Epitaxial-Substrate Junction  

E-Print Network (OSTI)

1 Improved One-dimensional Analysis of CMOS Photodiode Including Epitaxial-Substrate Junction J. S-dimensional analysis of CMOS photodiode has been derived in which the effect of the substrate, which forms a high-empirical expression exhibits a good agreement with the measured spectral response of n+ pepi photodiodes fabricated

Hornsey, Richard

422

Primal-Dual Interior Point Method Applied to the Short Term Hydroelectric Scheduling Including a  

E-Print Network (OSTI)

Primal-Dual Interior Point Method Applied to the Short Term Hydroelectric Scheduling Including that minimizes losses in the transmission and costs in the generation of a hydroelectric power system, formulated such perturbing parameter. Keywords-- Hydroelectric power system, Network flow, Predispatch, Primal-dual interior

Oliveira, Aurélio R. L.

423

Student Poster Competition The 2004 UFFC Joint Anniversary Conference will include a Student Poster  

E-Print Network (OSTI)

Student Poster Competition The 2004 UFFC Joint Anniversary Conference will include a Student Poster to the student's CV. Students who are submitting abstracts for presentation are also invited to participate in this student paper competition. Abstracts submitted by students for the Student Paper Competition

Lu, Jian-yu

424

Humanities: 12 credits (L,H,X,Z) --Must include 6 credits Literature (L)  

E-Print Network (OSTI)

Humanities: 12 credits (L,H,X,Z) -- Must include 6 credits Literature (L) Social Science: 12-level credits in residence in each major BREADTH of Exploration in the Liberal Arts & Sciences DEPTH of Inquiry in the Liberal Arts & Sciences Mastery of Intermediate/Advanced Work: 60 credits (I,A,D) QUANTITY & QUALITY

Liblit, Ben

425

Vertebrates are animals with a backbone and include mammals, birds and fishes. Considering  

E-Print Network (OSTI)

Vertebrates are animals with a backbone and include mammals, birds and fishes. Considering roughly three quarters of the earth is covered in water it should be no surprise that fish are the most numerous vertebrates in the world. According to the Florida Museum of Natural History there are about 28,000 known fish

Watson, Craig A.

426

Safety First Safety Last Safety Always Aerial lifts include the following types of vehicle-mounted  

E-Print Network (OSTI)

Safety First Safety Last Safety Always Aerial lifts include the following types of vehicle, if they can be installed safely. Aerial Lifts Safety Tip #11 A spill, a slip, a hospital trip #12;Additional Information for Presenters Review the information provided on the reverse side of this safety tip sheet

Minnesota, University of

427

Safety First Safety Last Safety Always Personal fall-protection systems include a body harness (safe-  

E-Print Network (OSTI)

Safety First Safety Last Safety Always Personal fall-protection systems include a body harness so they will not be damaged. Personal Fall-Protection Systems Safety Tip #8 Just because you always;Additional Information for Presenters Review the information provided on the reverse side of this safety tip

Minnesota, University of

428

Abstract. Increased ethylene evolution accompanies seed germination of many species including Pisum  

E-Print Network (OSTI)

Abstract. Increased ethylene evolution accompanies seed germination of many species including Pisum sativum L., but only a little is known about the regulation of the ethylene biosynthetic pathway in dierent seed tissues. Biosynthesis of the direct ethylene precursor 1-aminocyclopropane-1-carboxylic acid

Leubner, Gerhard

429

A virtual environment for the interrogation of 3D polycrystalline microstructure including  

E-Print Network (OSTI)

A virtual environment for the interrogation of 3D polycrystalline microstructure including grain of Mechanical and Aerospace Engineering, 101 Frank H.T. Rhodes Hall, Cornell University, Ithaca, NY 14853. The macroscopic response is obtained through volume- averaging laws. A constitutive framework for elasto

Zabaras, Nicholas J.

430

A non-isothermal PEM fuel cell model including two water transport mechanisms in the  

E-Print Network (OSTI)

A non-isothermal PEM fuel cell model including two water transport mechanisms in the membrane K Freiburg Germany A dynamic two-phase flow model for proton exchange mem- brane (PEM) fuel cells and the species concentrations. In order to describe the charge transport in the fuel cell the Poisson equations

Münster, Westfälische Wilhelms-Universität

431

Learn more about the summer course which includes a 3 week trip to South Africa.  

E-Print Network (OSTI)

Learn more about the summer course which includes a 3 week trip to South Africa. The program an introduction to the historical and the con- temporary South Africa as well as at least one post trip meeting@binghamton.edu or Josephine Allen at jaallen@binghamton.edu. Destination South Africa - Summer Course 2012 February 28th

Suzuki, Masatsugu

432

SBIR/STTR Release 2 Topics Announced—Includes Hydrogen and Fuel Cells  

Energy.gov (U.S. Department of Energy (DOE))

The 2015 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase I Release 2 topics include fuel cell-battery electric hybrid trucks and in-line quality control devices for polymer electrolyte membrane (PEM) fuel cells.

433

WBS DICTIONARY This dictionary gives a succinct definition of some of the most important tasks included  

E-Print Network (OSTI)

include the 100 kV insulating platform for the EBIS source and its associated power supplies, as well for the solenoid in order to enable use of its magnet field "tails" for the electron beam transmission in areas support structures for the EBIS, the electron gun, the LEBT line, and the external ion sources. It also

434

NUMERICAL MODELING OF DEFORMATION AND FRACTURE OF WOOD INCLUDING HETEROGENEITY AND ANISOTROPY  

E-Print Network (OSTI)

NUMERICAL MODELING OF DEFORMATION AND FRACTURE OF WOOD INCLUDING HETEROGENEITY AND ANISOTROPY John A. Nairn Wood Science & Engineering, Oregon State University, USA Abstract The challenge in numerical modeling of wood is to have the model closely match the structure of a real specimen. The model

Nairn, John A.

435

The Peach State Alliance is a coalition of seven higher education institutions, including  

E-Print Network (OSTI)

The Peach State Alliance is a coalition of seven higher education institutions, including Stokes Alliance for Minority Participation (PS-LSAMP) About the Peach State Alliance "Educating the next, and receive financial support." Stephanie Hernandez Biology Major #12;The Louis Stokes Alliance for Minority

Weber, Rodney

436

Hydraulically actuated fuel injector including a pilot operated spool valve assembly and hydraulic system using same  

DOE Patents (OSTI)

The present invention relates to hydraulic systems including hydraulically actuated fuel injectors that have a pilot operated spool valve assembly. One class of hydraulically actuated fuel injectors includes a solenoid driven pilot valve that controls the initiation of the injection event. However, during cold start conditions, hydraulic fluid, typically engine lubricating oil, is particularly viscous and is often difficult to displace through the relatively small drain path that is defined past the pilot valve member. Because the spool valve typically responds slower than expected during cold start due to the difficulty in displacing the relatively viscous oil, accurate start of injection timing can be difficult to achieve. There also exists a greater difficulty in reaching the higher end of the cold operating speed range. Therefore, the present invention utilizes a fluid evacuation valve to aid in displacement of the relatively viscous oil during cold start conditions.

Shafer, Scott F. (Morton, IL)

2002-01-01T23:59:59.000Z

437

The structure of hypersonic shock waves using Navier-Stokes equations modified to include mass diffusion  

E-Print Network (OSTI)

Howard Brenner has recently proposed modifications to the Navier-Stokes equations that relate to a diffusion of fluid volume that would be significant for flows with high density gradients. In a previous paper (Greenshields & Reese, 2007), we found these modifications gave good predictions of the viscous structure of shock waves in argon in the range Mach 1.0-12.0 (while conventional Navier-Stokes equations are known to fail above about Mach 2). However, some areas of concern with this model were a somewhat arbitrary choice of modelling coefficient, and potentially unphysical and unstable solutions. In this paper, we therefore present slightly different modifications to include molecule mass diffusion fully in the Navier-Stokes equations. These modifications are shown to be stable and produce physical solutions to the shock problem of a quality broadly similar to those from the family of extended hydrodynamic models that includes the Burnett equations. The modifications primarily add a diffusion term to t...

Greenshields, Christopher J

2007-01-01T23:59:59.000Z

438

Method for pulse control in a laser including a stimulated brillouin scattering mirror system  

DOE Patents (OSTI)

A laser system, such as a master oscillator/power amplifier system, comprises a gain medium and a stimulated Brillouin scattering SBS mirror system. The SBS mirror system includes an in situ filtered SBS medium that comprises a compound having a small negative non-linear index of refraction, such as a perfluoro compound. An SBS relay telescope having a telescope focal point includes a baffle at the telescope focal point which blocks off angle beams. A beam splitter is placed between the SBS mirror system and the SBS relay telescope, directing a fraction of the beam to an alternate beam path for an alignment fiducial. The SBS mirror system has a collimated SBS cell and a focused SBS cell. An adjustable attenuator is placed between the collimated SBS cell and the focused SBS cell, by which pulse width of the reflected beam can be adjusted.

Dane, C. Brent (Livermore, CA); Hackel, Lloyd (Livermore, CA); Harris, Fritz B. (Rocklin, CA)

2007-10-23T23:59:59.000Z

439

Analysis of the Thermonuclear Instability including Low-Power ICRH Minority Heating in IGNITOR  

E-Print Network (OSTI)

The nonlinear thermal balance equation for classical plasma in a toroidal geometry is analytically and numerically investigated including ICRH power. The determination of the equilibrium temperature and the analysis of the stability of the solution are performed by solving the energy balance equation that includes the transport relations obtained by the kinetic theory. An estimation of the confinement time is also provided. We show that the ICRH heating in the IGNITOR experiment, among other applications, is expected to stabilize the power of the thermonuclear burning by automatic regulation of the RF coupled power. Here a scenario is considered where IGNITOR is led to operate in a slightly sub-critical regime by adding a small fraction of ${}^3He$ to the nominal 50-50 Deuterium-Tritium mixture. The difference between power lost and alpha heating is compensated by additional ICRH heating, which should be able to increase the global plasma temperature via collisions between ${}^3He$ minority and the background...

Cardinali, Alessandro

2014-01-01T23:59:59.000Z

440

Policy Flash 2013-49 Updating Reporting Requirement Checklist including the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Policy Flash 2013-49 Updating Reporting Requirement Checklist Policy Flash 2013-49 Updating Reporting Requirement Checklist including the research performance progress report Policy Flash 2013-49 Updating Reporting Requirement Checklist including the research performance progress report Questions concerning this policy flash should be directed to Ellen Colligan, of the Contract and Financial Assistance Policy Division, Office of Contract Management, Office of Acquisition and Project Management at (202) 287-1776, Ellen.colligan@hq.doe.gov Policy Flash 2013-49.pdf Attch_FA_RepReqChecklist_COMBINED_FINAL_4-23-13 (3).pdf More Documents & Publications ATTACHMENT FLASH 2011-46(6) Federal Assistance Reporting Checklist and Instructions for Projects Federal Assistance Reporting Checklist and Instructions for RD&D Projects

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

6 End Uses of Fuel Consumption, 2006;" 6 End Uses of Fuel Consumption, 2006;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," " " ",,,,"Fuel Oil",,,"Coal" " "," ","Net","Residual","and",,"LPG and","(excluding Coal"," " "End Use","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Natural Gas(c)","NGL(d)","Coke and Breeze)","Other(e)"

442

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

1. End Uses of Fuel Consumption, 1998;" 1. End Uses of Fuel Consumption, 1998;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," "," " " ",,,,"Fuel Oil",,,"(excluding Coal" " "," ","Net","Residual","and","Natural Gas(c)","LPG and","Coke and Breeze)"," ","RSE" " ","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","(billion","NGL(d)","(million","Other(e)","Row"

443

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

2. End Uses of Fuel Consumption, 1998;" 2. End Uses of Fuel Consumption, 1998;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal",,"RSE" " "," ","Net","Residual","and",,"LPG and","(excluding Coal"," ","Row" "End Use","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Natural Gas(c)","NGL(d)","Coke and Breeze)","Other(e)","Factors"

444

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

5 End Uses of Fuel Consumption, 2010;" 5 End Uses of Fuel Consumption, 2010;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," " " ",,,,"Fuel Oil",,,"(excluding Coal" " "," ","Net","Residual","and","Natural Gas(c)","LPG and","Coke and Breeze)"," " " ","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","(billion","NGL(d)","(million","Other(e)"

445

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

5 End Uses of Fuel Consumption, 2002;" 5 End Uses of Fuel Consumption, 2002;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal" " "," ","Net","Residual","and","Natural ","LPG and","(excluding Coal"," ","RSE" " ","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Gas(c)","NGL(d)","Coke and Breeze)","Other(e)","Row"

446

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

6 End Uses of Fuel Consumption, 2010;" 6 End Uses of Fuel Consumption, 2010;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," " " ",,,,"Fuel Oil",,,"Coal" " "," ","Net","Residual","and",,"LPG and","(excluding Coal"," " "End Use","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Natural Gas(c)","NGL(d)","Coke and Breeze)","Other(e)"

447

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

6 End Uses of Fuel Consumption, 2002;" 6 End Uses of Fuel Consumption, 2002;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal",,"RSE" " "," ","Net","Residual","and","Natural ","LPG and","(excluding Coal"," ","Row" "End Use","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Gas(c)","NGL(d)","Coke and Breeze)","Other(e)","Factors"

448

Certification and Accreditation Process for Information Systems Including National Security Systems  

Directives, Delegations, and Requirements

The Notice ensures the effectiveness of security controls on DOE Federal information systems including national security systems. The Notice will also ensure compliance with the requirements of DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03, and protect DOE information and information systems from unauthorized access, use, disclosure, modification, or destruction. No cancellations. DOE N 205.15, dated 3-18-05, extends this directive until 3-18-06.

2004-02-19T23:59:59.000Z

449

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

5 End Uses of Fuel Consumption, 2006;" 5 End Uses of Fuel Consumption, 2006;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," " " ",,,,"Fuel Oil",,,"(excluding Coal" " "," ","Net","Residual","and","Natural Gas(c)","LPG and","Coke and Breeze)"," " " ","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","(billion","NGL(d)","(million","Other(e)"

450

Method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method of destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500.degree. C. to heat the particulate material to a temperature in the range of from about 200.degree. C. to about 900.degree. C. in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

McIntosh, Michael J. (Bolingbrook, IL); Arzoumanidis, Gregory G. (Naperville, IL)

1997-01-01T23:59:59.000Z

451

Swozzle based burner tube premixer including inlet air conditioner for low emissions combustion  

DOE Patents (OSTI)

A burner for use in a combustion system of a heavy-duty industrial gas turbine includes a fuel/air premixer having an air inlet, a fuel inlet, and an annular mixing passage. The fuel/air premixer mixes fuel and air into a uniform mixture for injection into a combustor reaction zone. The burner also includes an inlet flow conditioner disposed at the air inlet of the fuel/air premixer for controlling a radial and circumferential distribution of incoming air. The pattern of perforations in the inlet flow conditioner is designed such that a uniform air flow distribution is produced at the swirler inlet annulus in both the radial and circumference directions. The premixer includes a swozzle assembly having a series of preferably air foil shaped turning vanes that impart swirl to the airflow entering via the inlet flow conditioner. Each air foil contains internal fuel flow passages that introduce natural gas fuel into the air stream via fuel metering holes that pass through the walls of the air foil shaped turning vanes. By injecting fuel in this manner, an aerodynamically clean flow field is maintained throughout the premixer. By injecting fuel via two separate passages, the fuel/air mixture strength distribution can be controlled in the radial direction to obtain optimum radial concentration profiles for control of emissions, lean blow outs, and combustion driven dynamic pressure activity as machine and combustor load are varied.

Tuthill, Richard Sterling (Bolton, CT); Bechtel, II, William Theodore (Scotia, NY); Benoit, Jeffrey Arthur (Scotia, NY); Black, Stephen Hugh (Duanesburg, NY); Bland, Robert James (Clifton Park, NY); DeLeonardo, Guy Wayne (Scotia, NY); Meyer, Stefan Martin (Troy, NY); Taura, Joseph Charles (Clifton Park, NY); Battaglioli, John Luigi (Glenville, NY)

2002-01-01T23:59:59.000Z

452

A method and system including a double rotary kiln pyrolysis or gasification of waste material  

SciTech Connect

A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

McIntosh, M.J.; Arzoumanidis, G.G.

1995-12-31T23:59:59.000Z

453

Method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet. 5 figs.

McIntosh, M.J.; Arzoumanidis, G.G.

1997-09-02T23:59:59.000Z

454

Cesium and strontium extraction using a mixed extractant solvent including crown ether and calixarene extractants  

DOE Patents (OSTI)

A mixed extractant solvent including calix[4]arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The mixed extractant solvent may be used to remove cesium and strontium from an acidic solution. The DtBu18C6 may be present from approximately 0.01 M to approximately 0.4M, such as from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The mixed extractant solvent may form an organic phase in an extraction system that also includes an aqueous phase. Methods of extracting cesium and strontium as well as strontium alone are also disclosed.

Meikrantz, David H. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Riddle, Catherine L. (Idaho Falls, ID); Law, Jack D. (Pocatello, ID); Peterman, Dean R. (Idaho Falls, ID); Mincher, Bruce J. (Idaho Falls, ID); McGrath, Christopher A. (Blackfoot, ID); Baker, John D. (Blackfoot, ID)

2007-11-06T23:59:59.000Z

455

Process For Controlling Flow Rate Of Viscous Materials Including Use Of Nozzle With Changeable Openings  

DOE Patents (OSTI)

Apparatus and a method for controlling the flow rate of viscous materials through a nozzle includes an apertured main body and an apertured end cap coupled together and having an elongated, linear flow channel extending the length thereof. An end of the main body is disposed within the end cap and includes a plurality of elongated slots concentrically disposed about and aligned with the flow channel. A generally flat cam plate having a center aperture is disposed between the main body and end cap and is rotatable about the flow channel. A plurality of flow control vane assemblies are concentrically disposed about the flow channel and are coupled to the cam plate. Each vane assembly includes a vane element disposed adjacent the end of the flow channel. Rotation of the cam plate in a first direction causes a corresponding rotation of each of the vane elements for positioning the individual vane elements over the aperture in the end cap blocking flow through the flow channel, while rotation in an opposite direction removes the vane elements from the aperture and positions them about the flow channel in a nested configuration in the full open position, with a continuous range of vane element positions available between the full open and closed positions.

Ellingson, William A. (Naperville, IL); Forster, George A. (Westmont, IL)

1999-11-02T23:59:59.000Z

456

New standards in flexible pipe technology including API Spec 17J  

SciTech Connect

Recent and future developments in the offshore industry will see the use of flexible pipes in more severe applications than previously. Included in this is its use in deep water, high temperature, high pressure and sour service applications. There is therefore a requirement in the industry for the development of consistent standards for the specification, design, materials, manufacturing and testing of flexible pipes. A Joint Industry Project (JIP) commenced early in 1994 to develop these new industry wide standards for unbonded flexible pipe. The 20 participants to the JIP included twelve oil companies, three manufacturers, three regulatory authorities and three contractors. The first phase of the project involved the development of a standard specification for flexible pipe, with a second phase, presently ongoing, to develop a new recommended practice for flexible pipe. The initial development of the industry standard specification was completed in May of 1995 and the document was subsequently submitted to API for technical review. This was completed by December 1995. The specification was updated accordingly in cooperation between API and the JIP, and subsequently released in January 1996 for API balloting. The specification is expected to be adopted and published as API Spec 17J by the middle of 1996. The specification will also be incorporated during 1996 into the new ISO series of standards for subsea equipment. The recommended practice will update API RP 17B to supplement the pipe specification and incorporate new technological developments. This paper discusses the scope, including new developments, addressed by API Spec 17J and also describes significant aspects in the updating of the recommended practice. This development of new standards within the flexible pipe industry is in line with the objectives of initiatives such as CRINE and NORSOK.

Grealish, F.W.; Bliault, A.; Caveny, K.P.

1996-12-31T23:59:59.000Z

457

Nuclear relativistic Hartree-Fock calculations including pions interacting with a scalar field  

SciTech Connect

The effect of pions on the nuclear shell structure is analyzed in a relativistic Hartree-Fock approximation (RHFA). The Lagrangian includes, in particular, a mixture of {pi}N pseudoscalar (PS) and pseudovector (PV) couplings, self-interactions of the scalar field {sigma} and a {sigma} - {pi} interaction that dresses pions with an effective mass (m*{sub {pi}}). It is found that an increase of m*{sub {pi}} strongly reduces the unrealistic effect of pions, keeping roughly unchanged their contribution to the total binding energy.

Marcos, S.; Lopez-Quelle, M.; Niembro, R.; Savushkin, L. N. [Departamento de Fisica Moderna, Universidad de Cantabria, Santander (Spain); Departamento de Fisica Aplicada, Universidad de Cantabria, Santander (Spain); Departamento de Fisica Moderna, Universidad de Cantabria, Santander (Spain); Department of Physics, St. Petersburg University for Telecommunications, St. Petersburg (Russian Federation)

2012-10-20T23:59:59.000Z

458

Final Report: Fan Filter Unit Project  

NLE Websites -- All DOE Office Websites (Extended Search)

61684 61684 Demonstration of Advanced Filtration Technologies: Developing Energy-rebate Criteria through Performing Standard Laboratory Tests and Statistical Analyses Final Report (LBNL- 61684) To California Energy Commission 2007 Tengfang Xu and Duo Wang 2 Disclaimer This document was prepared as an account of work sponsored by the United States Government and California Energy Commission. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor California Energy Commission, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or

459

Evaluation of the cooling fan efficiency index.  

E-Print Network (OSTI)

thermal microenvironment, Ergonomics (submitted). Sun, W. ,ISO 7726, International Standard: Ergonomics of the thermalOther factors such as ergonomics, control options, etc. ,

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

460

Dr. Xudong (Sherman) Fan Associate Professor  

E-Print Network (OSTI)

ring resonator technology platform for rapid and sensitive biological and chemical sensing The optical) is a unique technology platform developed in my lab in the past four years, which integrates microfluidics and photonics. The platform has a wide spectrum of applications, ranging from low-cost, portable, sensitive

Van Veen, Barry D.

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Fan System Assessment Tool Introduction - Webcast  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Plan Learn how others have saved Access the National Industrial Assessment Center (IAC) Database EERE Information Center On-call team of professional engineers, scientists,...

462

Performance Assessment of Photovoltaic Attic Ventilator Fans  

E-Print Network (OSTI)

. However, when ducts are present in the attic, the magnitude of heat gain to the thermal distribution system under peak conditions can be often much greater than the ceiling heat flux in well-insulated attics (Parker et al.. 1993; Hageman and Modera... this fact Assume a 2,000 square foot ceiling with R-30 attic insulation. Supply ducts in most residences often comprise a combined area of -25% of the gross floor area (see Gu et al. 1997, Appendix G. and Jump and Modera. 1994). but are only insulated...

Parker, D. S.; Sherwin, J. R.

2000-01-01T23:59:59.000Z

463

Experimental investigation of an aspirated fan stage  

E-Print Network (OSTI)

This thesis focuses on the use of aspiration on compressor blade design. The pressure ratio can be significantly increased by controlling the development of the blade and endwall boundary layers. This concept is validated ...

Schuler, Brian Joseph, 1974-

2001-01-01T23:59:59.000Z

464

THERMOHALINE INSTABILITIES INSIDE STARS: A SYNTHETIC STUDY INCLUDING EXTERNAL TURBULENCE AND RADIATIVE LEVITATION  

SciTech Connect

We have derived a new expression for the thermohaline mixing coefficient in stars, including the effects of radiative levitation and external turbulence, by solving Boussinesq equations in a nearly incompressible stratified fluid with a linear approximation. It is well known that radiative levitation of individual elements can lead to their accumulation in specific stellar layers. In some cases, it can induce important effects on the stellar structure. Here we confirm that this accumulation is moderated by thermohaline convection due to the resulting inverse {mu}-gradient. The new coefficient that we have derived shows that the effect of radiative accelerations on the thermohaline instability itself is small. This effect must however be checked in all computations. We also confirm that the presence of large horizontal turbulence can reduce or even suppress the thermohaline convection. These results are important as they concern all the cases of heavy element accumulation in stars. Computations of radiative diffusion must be revisited to include thermohaline convection and its consequences. It may be one of the basic reasons for the fact that the observed abundances are always smaller than those predicted by pure atomic diffusion. In any case, these processes have to compete with rotation-induced mixing, but this competition is more complex than previously thought due to their mutual interaction.

Vauclair, Sylvie; Theado, Sylvie, E-mail: sylvie.vauclair@irap.omp.eu [Universite de Toulouse, UPS-OMP and CNRS, Institut de Recherche en Astrophysique et Planetologie, 14 avenue Edouard Belin, F-31400 Toulouse (France)

2012-07-01T23:59:59.000Z

465

Zirconium-based alloys, nuclear fuel rods and nuclear reactors including such alloys, and related methods  

DOE Patents (OSTI)

Zirconium-based metal alloy compositions comprise zirconium, a first additive in which the permeability of hydrogen decreases with increasing temperatures at least over a temperature range extending from 350.degree. C. to 750.degree. C., and a second additive having a solubility in zirconium over the temperature range extending from 350.degree. C. to 750.degree. C. At least one of a solubility of the first additive in the second additive over the temperature range extending from 350.degree. C. to 750.degree. C. and a solubility of the second additive in the first additive over the temperature range extending from 350.degree. C. to 750.degree. C. is higher than the solubility of the second additive in zirconium over the temperature range extending from 350.degree. C. to 750.degree. C. Nuclear fuel rods include a cladding material comprising such metal alloy compositions, and nuclear reactors include such fuel rods. Methods are used to fabricate such zirconium-based metal alloy compositions.

Mariani, Robert Dominick

2014-09-09T23:59:59.000Z

466

Calculation of $P_ and $T_ odd effects in $"" sup 205_TIF including electron correlation  

E-Print Network (OSTI)

A method and codes for two-step correlation calculation of heavy-atom molecules have been developed, employing the generalized relativistic effective core potential and relativistic coupled cluster (RCC) methods at the first step, followed by nonvariational one-center restoration of proper four-component spinors in the heavy cores. Electron correlation is included for the first time in an ab initio calculation of the interaction of the permanent P,T-odd proton electric dipole moment with the internal electromagnetic field in a molecule. The calculation is performed for the ground state of TlF at the experimental equilibrium, R_e=2.0844 A, and at R=2.1 A, with spin-orbit and correlation effects included by RCC. Calculated results with single cluster amplitudes only are in good agreement (3% and 1%) with recent Dirac-Hartree-Fock (DHF) values of the magnetic parameter M; the larger differences occurring between present and DHF volume parameter (X) values, as well as between the two DHF calculations, are explained. Inclusion of electron correlation by GRECP/RCC with single and double excitations has a major effect on the P,T-odd parameters, decreasing M by 17% and X by 22%.

A. N. Petrov; N. S. Mosyagin; T. A. Isaev; A. V. Titov; V. F. Ezhov; E. Eliav; U. Kaldor

2001-08-14T23:59:59.000Z

467

Should Title 24 Ventilation Requirements Be Amended to include an Indoor Air Quality Procedure?  

SciTech Connect

Minimum outdoor air ventilation rates (VRs) for buildings are specified in standards, including California?s Title 24 standards. The ASHRAE ventilation standard includes two options for mechanically-ventilated buildings ? a prescriptive ventilation rate procedure (VRP) that specifies minimum VRs that vary among occupancy classes, and a performance-based indoor air quality procedure (IAQP) that may result in lower VRs than the VRP, with associated energy savings, if IAQ meeting specified criteria can be demonstrated. The California Energy Commission has been considering the addition of an IAQP to the Title 24 standards. This paper, based on a review of prior data and new analyses of the IAQP, evaluates four future options for Title 24: no IAQP; adding an alternate VRP, adding an equivalent indoor air quality procedure (EIAQP), and adding an improved ASHRAE-like IAQP. Criteria were established for selecting among options, and feedback was obtained in a workshop of stakeholders. Based on this review, the addition of an alternate VRP is recommended. This procedure would allow lower minimum VRs if a specified set of actions were taken to maintain acceptable IAQ. An alternate VRP could also be a valuable supplement to ASHRAE?s ventilation standard.

Dutton, Spencer M.; Mendell, Mark J.; Chan, Wanyu R.

2013-05-13T23:59:59.000Z

468

Coupled multi-body dynamics and CFD for wind turbine simulation including explicit wind turbulence  

Science Journals Connector (OSTI)

Abstract A high fidelity approach for wind turbine aero-elastic simulations including explicit representation of the atmospheric wind turbulence is presented. The approach uses a dynamic overset computational fluid dynamics (CFD) code for the aerodynamics coupled with a multi-body dynamics (MBD) code for the motion responses to the aerodynamic loads. Mann's wind turbulence model was implemented into the CFD code as boundary and initial conditions. The wind turbulence model was validated by comparing the theoretical one-point spectrum for the three components of the velocity fluctuations, and by comparing the expected statistics from the CFD simulated wind turbulent field with the explicit wind turbulence inlet boundary from Mann model. Extensive simulations based on the proposed coupled approach were conducted with the conceptual NREL 5-MW offshore wind turbine in an increasing level of complexity, analyzing the turbine behavior as elasticity, wind shear and atmospheric wind turbulence are added to the simulations. Results are compared with the publicly available simulations results from OC3 participants, showing good agreement for the aerodynamic loads and blade tip deflections in time and frequency domains. Wind turbulence/turbine interaction was examined for the wake flow. It was found that explicit turbulence addition results in considerably increased wake diffusion. The coupled CFD/MBD approach can be extended to include multibody models of the shaft, bearings, gearbox and generator, resulting in a promising tool for wind turbine design under complex operational environments.

Y. Li; A.M. Castro; T. Sinokrot; W. Prescott; P.M. Carrica

2015-01-01T23:59:59.000Z

469

Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

6 End Uses of Fuel Consumption, 2006; 6 End Uses of Fuel Consumption, 2006; Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Electricity; Unit: Trillion Btu. Distillate Fuel Oil Coal Net Residual and LPG and (excluding Coal End Use Total Electricity(a) Fuel Oil Diesel Fuel(b) Natural Gas(c) NGL(d) Coke and Breeze) Other(e) Total United States TOTAL FUEL CONSUMPTION 15,658 2,850 251 129 5,512 79 1,016 5,820 Indirect Uses-Boiler Fue -- 41 133 23 2,119 8 547 -- Conventional Boiler Use 41 71 17 1,281 8 129 CHP and/or Cogeneration Process 0 62 6 838 1 417 Direct Uses-Total Process -- 2,244 62 52 2,788 39 412 -- Process Heating -- 346 59 19 2,487 32 345 -- Process Cooling and Refrigeration -- 206 * 1 32 * * -- Machine Drive

470

Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

2 End Uses of Fuel Consumption, 2006; 2 End Uses of Fuel Consumption, 2006; Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Electricity; Unit: Trillion Btu. Distillate Fuel Oil Coal NAICS Net Residual and LPG and (excluding Coal Code(a) End Use Total Electricity(b) Fuel Oil Diesel Fuel(c) Natural Gas(d) NGL(e) Coke and Breeze) Other(f) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES TOTAL FUEL CONSUMPTION 15,658 2,850 251 129 5,512 79 1,016 5,820 Indirect Uses-Boiler Fuel -- 41 133 23 2,119 8 547 -- Conventional Boiler Use -- 41 71 17 1,281 8 129 -- CHP and/or Cogeneration Process -- -- 62 6 838 1 417 -- Direct Uses-Total Process -- 2,244 62 52 2,788 39 412 -- Process Heating -- 346 59 19 2,487

471

Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Demand for Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

Next MECS will be conducted in 2010 Table 5.8 End Uses of Fuel Consumption, 2006; Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Demand for Electricity; Unit: Trillion Btu. Distillate Fuel Oil Coal Net Demand Residual and LPG and (excluding Coal End Use for Electricity(a) Fuel Oil Diesel Fuel(b) Natural Gas(c) NGL(d) Coke and Breeze) Total United States TOTAL FUEL CONSUMPTION 3,335 251 129 5,512 79 1,016 Indirect Uses-Boiler Fuel 84 133 23 2,119 8 547 Conventional Boiler Use 84 71 17 1,281 8 129 CHP and/or Cogeneration Process 0 62 6 838 1 417 Direct Uses-Total Process 2,639 62 52 2,788 39 412 Process Heating 379 59 19 2,487 32 345 Process Cooling and Refrigeration

472

Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

1 End Uses of Fuel Consumption, 2006; 1 End Uses of Fuel Consumption, 2006; Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Electricity; Unit: Physical Units or Btu. Distillate Coal Fuel Oil (excluding Coal Net Residual and Natural Gas(d) LPG and Coke and Breeze) NAICS Total Electricity(b) Fuel Oil Diesel Fuel(c) (billion NGL(e) (million Other(f) Code(a) End Use (trillion Btu) (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) (trillion Btu) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES TOTAL FUEL CONSUMPTION 15,658 835,382 40 22 5,357 21 46 5,820 Indirect Uses-Boiler Fuel -- 12,109 21 4 2,059 2 25 -- Conventional Boiler Use -- 12,109 11 3 1,245 2 6 -- CHP and/or Cogeneration Process

473

Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Demand for Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

7 End Uses of Fuel Consumption, 2006; 7 End Uses of Fuel Consumption, 2006; Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Demand for Electricity; Unit: Physical Units or Btu. Distillate Coal Fuel Oil (excluding Coal Net Demand Residual and Natural Gas(c) LPG and Coke and Breeze) for Electricity(a) Fuel Oil Diesel Fuel(b) (billion NGL(d) (million End Use (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) Total United States TOTAL FUEL CONSUMPTION 977,338 40 22 5,357 21 46 Indirect Uses-Boiler Fuel 24,584 21 4 2,059 2 25 Conventional Boiler Use 24,584 11 3 1,245 2 6 CHP and/or Cogeneration Process 0 10 1 814 * 19 Direct Uses-Total Process 773,574 10 9 2,709 10 19 Process Heating

474

Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

5 End Uses of Fuel Consumption, 2006; 5 End Uses of Fuel Consumption, 2006; Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Electricity; Unit: Physical Units or Btu. Distillate Coal Fuel Oil (excluding Coal Net Residual and Natural Gas(c) LPG and Coke and Breeze) Total Electricity(a) Fuel Oil Diesel Fuel(b) (billion NGL(d) (million Other(e) End Use (trillion Btu) (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) (trillion Btu) Total United States TOTAL FUEL CONSUMPTION 15,658 835,382 40 22 5,357 21 46 5,820 Indirect Uses-Boiler Fuel -- 12,109 21 4 2,059 2 25 -- Conventional Boiler Use 12,109 11 3 1,245 2 6 CHP and/or Cogeneration Process 0 10 1 814 * 19 Direct Uses-Total Process

475

The Food Crises: A quantitative model of food prices including speculators and ethanol conversion  

E-Print Network (OSTI)

Recent increases in basic food prices are severely impacting vulnerable populations worldwide. Proposed causes such as shortages of grain due to adverse weather, increasing meat consumption in China and India, conversion of corn to ethanol in the US, and investor speculation on commodity markets lead to widely differing implications for policy. A lack of clarity about which factors are responsible reinforces policy inaction. Here, for the first time, we construct a dynamic model that quantitatively agrees with food prices. The results show that the dominant causes of price increases are investor speculation and ethanol conversion. Models that just treat supply and demand are not consistent with the actual price dynamics. The two sharp peaks in 2007/2008 and 2010/2011 are specifically due to investor speculation, while an underlying upward trend is due to increasing demand from ethanol conversion. The model includes investor trend following as well as shifting between commodities, equities and bonds to take ad...

Lagi, Marco; Bertrand, Karla Z; Bar-Yam, Yaneer

2011-01-01T23:59:59.000Z

476

Polymerase chain reaction system using magnetic beads for analyzing a sample that includes nucleic acid  

DOE Patents (OSTI)

A polymerase chain reaction system for analyzing a sample containing nucleic acid includes providing magnetic beads; providing a flow channel having a polymerase chain reaction chamber, a pre polymerase chain reaction magnet position adjacent the polymerase chain reaction chamber, and a post pre polymerase magnet position adjacent the polymerase chain reaction chamber. The nucleic acid is bound to the magnetic beads. The magnetic beads with the nucleic acid flow to the pre polymerase chain reaction magnet position in the flow channel. The magnetic beads and the nucleic acid are washed with ethanol. The nucleic acid in the polymerase chain reaction chamber is amplified. The magnetic beads and the nucleic acid are separated into a waste stream containing the magnetic beads and a post polymerase chain reaction mix containing the nucleic acid. The reaction mix containing the nucleic acid flows to an analysis unit in the channel for analysis.

Nasarabadi, Shanavaz (Livermore, CA)

2011-01-11T23:59:59.000Z

477

Heavy quark collisional energy loss in the quark-gluon plasma including finite relaxation time  

E-Print Network (OSTI)

In this paper, we calculate the soft-collisional energy loss of heavy quarks traversing the viscous quark-gluon plasma including the effects of a finite relaxation time $\\tau_\\pi$ on the energy loss. We find that the collisional energy loss depends appreciably on $\\tau_\\pi$ . In particular, for typical values of the viscosity-to-entropy ratio, we show that the energy loss obtained using $\\tau_\\pi$ = 0 can be $\\sim$ 10$\\%$ larger than the one obtained using $\\tau_\\pi$ = 0. Moreover, we find that the energy loss obtained using the kinetic theory expression for $\\tau_\\pi$ is much larger that the one obtained with the $\\tau_\\pi$ derived from the Anti de Sitter/Conformal Field Theory correspondence. Our results may be relevant in the modeling of heavy quark evolution through the quark-gluon plasma.

Mauro Elias; J. Peralta-Ramos; E. Calzetta

2014-04-30T23:59:59.000Z

478

Frequency-dependent polarizability of helium including relativistic effects with nuclear recoil terms  

E-Print Network (OSTI)

Future metrology standards will be partly based on physical quantities computed from first principles rather than measured. In particular, a new pressure standard can be established if the dynamic polarizability of helium can be determined from theory with an uncertainty smaller than 0.2 ppm. We present calculations of the frequency-dependent part of this quantity including relativistic effects with full account of leading nuclear recoil terms and using highly optimized explicitly correlated basis sets. A particular emphasis is put on uncertainty estimates. At the He-Ne laser wavelength of 632.9908 nm, the computed polarizability value of 1.391 811 41 a.u. has uncertainty of 0.1 ppm that is two orders of magnitude smaller than those of the most accurate polarizability measurements. We also obtained an accurate expansion of the helium refractive index in powers of density.

Piszczatowski, Konrad; Komasa, Jacek; Jeziorski, Bogumil; Szalewicz, Krzysztof

2015-01-01T23:59:59.000Z

479

A high liquid yield process for retorting various organic materials including oil shale  

DOE Patents (OSTI)

This invention is a continuous retorting process for various high molecular weight organic materials, including oil shale, that yields an enhanced output of liquid product. The organic material, mineral matter, and an acidic catalyst, that appreciably adsorbs alkenes on surface sites at prescribed temperatures, are mixed and introduced into a pyrolyzer. A circulating stream of olefin enriched pyrolysis gas is continuously swept through the organic material and catalyst, whereupon, as the result of pyrolysis, the enhanced liquid product output is provided. Mixed spent organic material, mineral matter, and cool catalyst are continuously withdrawn from the pyrolyzer. Combustion of the spent organic material and mineral matter serves to reheat the catalyst. Olefin depleted pyrolysis gas, from the pyrolyzer, is enriched in olefins and recycled into the pyrolyzer. The reheated acidic catalyst is separated from the mineral matter and again mixed with fresh organic material, to maintain the continuously cyclic process. 2 figs.

Coburn, T.T.

1988-07-26T23:59:59.000Z

480

High liquid yield process for retorting various organic materials including oil shale  

DOE Patents (OSTI)

This invention is a continuous retorting process for various high molecular weight organic materials, including oil shale, that yields an enhanced output of liquid product. The organic material, mineral matter, and an acidic catalyst, that appreciably adsorbs alkenes on surface sites at prescribed temperatures, are mixed and introduced into a pyrolyzer. A circulating stream of olefin enriched pyrolysis gas is continuously swept through the organic material and catalyst, whereupon, as the result of pyrolysis, the enhanced liquid product output is provided. Mixed spent organic material, mineral matter, and cool catalyst are continuously withdrawn from the pyrolyzer. Combustion of the spent organic material and mineral matter serves to reheat the catalyst. Olefin depleted pyrolysis gas, from the pyrolyzer, is enriched in olefins and recycled into the pyrolyzer. The reheated acidic catalyst is separated from the mineral matter and again mixed with fresh organic material, to maintain the continuously cyclic process.

Coburn, Thomas T. (Livermore, CA)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "include fans blowers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Including radiative heat transfer and reaction quenching in modeling a Claus plant waste heat boiler  

SciTech Connect

Due to increasingly stringent sulfur emission regulations, improvements are necessary in the modified Claus process. A recently proposed model by Nasato et al. for the Claus plant waste heat boiler (WHB) is improved by including radiative heat transfer, which yields significant changes in the predicted heat flux and the temperature profile along the WHB tube, leading to a faster quenching of chemical reactions. For the WHB considered, radiation accounts for approximately 20% of the heat transferred by convection alone. More importantly, operating the WHB at a higher gas mass flux is shown to enhance reaction quenching, resulting in a doubling of the predicted hydrogen flow rate. This increase in hydrogen flow rate is sufficient to completely meet the hydrogen requirement of the H[sub 2]S recovery process considered, which would eliminate the need for a hydrogen plant.

Karan, K.; Mehrotra, A.K.; Behie, L.A. (Univ. of Calgary, Alberta (Canada). Dept. of Chemical and Petroleum Engineering)

1994-11-01T23:59:59.000Z

482

Ionization potential of {sup 9}Be calculated including nuclear motion and relativistic corrections  

SciTech Connect

Variational calculations employing explicitly correlated Gaussian functions have been performed for the ground states of {sup 9}Be and {sup 9}Be{sup +} including the nuclear motion [i.e., without assuming the Born-Oppenheimer (BO) approximation]. An approach based on the analytical energy gradient calculated with respect to the Gaussian exponential parameters was employed, leading to energies of the two systems noticeably improved over those found in the recent paper of Pachucki and Komasa [Phys. Rev. A 73, 052502 (2006)]. The non-BO wave functions were used to calculate the {alpha}{sup 2} relativistic corrections ({alpha}=e{sup 2}/({Dirac_h}/2{pi})c). With those corrections and the {alpha}{sup 3} and {alpha}{sup 4} corrections taken from Pachucki and Komasa, a new value of the ionization potential (IP) of {sup 9}Be was determined. It agrees very well with the most recent experimental IP.

Stanke, Monika [Department of Chemistry, University of Arizona, Tucson, Arizona 85721 (United States); Institute of Physics, Nicholas Copernicus University, ulica Grudziadzka 5, PL 87-100 Torun (Poland); Kedziera, Dariusz [Department of Chemistry, Nicholas Copernicus University, ulica Gagarina 7, PL 87-100 Torun (Poland); Bubin, Sergiy [Department of Chemistry, University of Arizona, Tucson, Arizona 85721 (United States); Adamowicz, Ludwik [Department of Chemistry, University of Arizona, Tucson, Arizona 85721 (United States); Department of Physics, University of Arizona, Tucson, Arizona 85721 (United States)

2007-05-15T23:59:59.000Z

483

Non-Born-Oppenheimer calculations of the lowest vibrational energy of HD including relativistic corrections  

Science Journals Connector (OSTI)

In this work we report variational calculations of the two lowest vibrational states of the HD molecule within the framework that does not assume the Born-Oppenheimer (BO) approximation. The nonrelativistic energies of the states were corrected for the relativistic effects of the order of ?2 (where ?=1c), calculated as expectation values of the operators representing these effects with the nonrelativistic non-BO wave functions. The non-BO wave functions were expanded in terms of the one-center explicitly correlated Gaussian functions multiplied by even powers of the internuclear distance. The v=0?1 transition energy obtained in the calculations is compared with the previous calculations, as well as with the transition frequency obtained from the experimental spectra. The comparison shows the need to include corrections higher than second order in ? to further improve the agreement between the theory and the experiment.

Monika Stanke; Sergiy Bubin; Marcin Molski; Ludwik Adamowicz

2009-03-16T23:59:59.000Z

484

Simulation of thermal reset transitions in resistive switching memories including quantum effects  

SciTech Connect

An in-depth study of reset processes in RRAMs (Resistive Random Access Memories) based on Ni/HfO{sub 2}/Si-n{sup +} structures has been performed. To do so, we have developed a physically based simulator where both ohmic and tunneling based conduction regimes are considered along with the thermal description of the devices. The devices under study have been successfully fabricated and measured. The experimental data are correctly reproduced with the simulator for devices with a single conductive filament as well as for devices including several conductive filaments. The contribution of each conduction regime has been explained as well as the operation regimes where these ohmic and tunneling conduction processes dominate.

Villena, M. A.; Jiménez-Molinos, F.; Roldán, J. B. [Departamento de Electrónica y Tecnología de Computadores, Universidad de Granada, Facultad de Ciencias, Avd. Fuentenueva s/n, 18071 Granada (Spain); González, M. B.; Campabadal, F. [Institut de Microelectrònica de Barcelona, IMB-CNM (CSIC), Campus UAB, 08193 Bellaterra (Spain); Suñé, J.; Miranda, E. [Departament d'Enginyeria Electrònica, Universitat Autònoma de Barcelona, Bellaterra Cerdanyola del Vallès 08193 (Spain); Romera, E. [Departamento de Física Atómica, Molecular y Nuclear and Instituto Carlos I de Física Teórica y Computacional, Universidad de Granada, Avd. Fuentenueva s/n, 18071 Granada (Spain)

2014-06-07T23:59:59.000Z

485

Comparative chloroplast genomics: Analyses including new sequencesfrom the angiosperms Nuphar advena and Ranunculus macranthus  

SciTech Connect

The number of completely sequenced plastid genomes available is growing rapidly. This new array of sequences presents new opportunities to perform comparative analyses. In comparative studies, it is most useful to compare across wide phylogenetic spans and, within angiosperms, to include representatives from basally diverging lineages such as the new genomes reported here: Nuphar advena (from a basal-most lineage) and Ranunculus macranthus (from the basal group of eudicots). We report these two new plastid genome sequences and make comparisons (within angiosperms, seed plants, or all photosynthetic lineages) to evaluate features such as the status of ycf15 and ycf68 as protein coding genes, the distribution of simple sequence repeats (SSRs) and longer dispersed repeats (SDR), and patterns of nucleotide composition.

Raubeso, Linda A.; Peery, Rhiannon; Chumley, Timothy W.; Dziubek,Chris; Fourcade, H. Matthew; Boore, Jeffrey L.; Jansen, Robert K.

2007-03-01T23:59:59.000Z

486

Engine including hydraulically actuated valvetrain and method of valve overlap control  

DOE Patents (OSTI)

An exhaust valve control method may include displacing an exhaust valve in communication with the combustion chamber of an engine to an open position using a hydraulic exhaust valve actuation system and returning the exhaust valve to a closed position using the hydraulic exhaust valve actuation assembly. During closing, the exhaust valve may be displaced for a first duration from the open position to an intermediate closing position at a first velocity by operating the hydraulic exhaust valve actuation assembly in a first mode. The exhaust valve may be displaced for a second duration greater than the first duration from the intermediate closing position to a fully closed position at a second velocity at least eighty percent less than the first velocity by operating the hydraulic exhaust valve actuation assembly in a second mode.

Cowgill, Joel (White Lake, MI)

2012-05-08T23:59:59.000Z

487

Lined sampling vessel including a filter to separate solids from liquids on exit  

DOE Patents (OSTI)

A filtering apparatus has an open canister with an inlet port. A canister lid is provided which includes an outlet port for the passage of fluids from the canister. Liners are also provided which are shaped to fit the interiors of the canister and the lid, with at least the canister liner preferably being flexible. The sample to be filtered is positioned inside the canister liner, with the lid and lid liner being put in place thereafter. A filter element is located between the sample and the outlet port. Seals are formed between the canister liner and lid liner, and around the outlet port to prevent fluid leakage. A pressure differential is created between the canister and the canister liner so that the fluid in the sample is ejected from the outlet port and the canister liner collapses around the retained solids.

Shurtliff, Rodney M. (Idaho Falls, ID); Klingler, Kerry M. (Idaho Falls, ID); Turner, Terry D. (Ammon, ID)

2001-01-01T23:59:59.000Z

488

Reduced model for the description of radiation-matter interaction including atomic recoil  

Science Journals Connector (OSTI)

We show that a model for the collective atomic recoil laser, previously introduced to include collisions with an external buffer gas, can be reduced to a single dynamical equation for the probe amplitude. This is the result of a clever adiabatic elimination of the atomic variables and of the assumption of a negligible effect of the probe field onto the atomic motion. This reduced model provides a fairly accurate description of the phase diagram of the original set of equations and allows for the investigation of more realistic regimes, where the direct simulation of the full model would be otherwise unfeasible. As a result, we find that the onset of a coherent field can be either described by a second- or first-order transition, the former scenario being observable only below a given temperature. Moreover, the first-order transition is accompanied by an intrinsic optical bistability region.

J. Javaloyes; G. L. Lippi; A. Politi

2003-09-12T23:59:59.000Z

489

Gravitational collapse of a macroscopic string by a Newtonian description including the effect of gravitational radiation  

E-Print Network (OSTI)

We make an attempt to dynamically study, in four space-time dimensions, the classical gravitational collapse of a macroscopic circular fundamental string, by a truncation of the Einstein equations that suppresses retarded features but keeps the main self-gravity peculiarities of the relativistic string dynamics, and allows the investigation of a possible infinite red-shift. The numerical solution of the string evolution in the self-induced metric shows an infinite red shift at a macroscopic size of the string, when the string reaches the velocity of light. We further include the back-reaction of the radiation of gravitons which induces energy dissipation: now the velocity of light is not reached, the infinite red-shift does not form and the string simply shrinks with damped oscillations.

Roberto Iengo

2007-02-12T23:59:59.000Z

490

Energy-density-functional calculations including the proton-neutron mixing  

E-Print Network (OSTI)

We present results of calculations based on the Skyrme energy density functional including the arbitrary mixing between protons and neutrons. In this framework, single-particle states are superpositions of proton and neutron components and the energy density functional is fully invariant with respect to three-dimensional rotations in the isospin space. The isospin of the system is controlled by means of the isocranking method, which carries over the standard cranking approach to the isospin space. We show numerical results of the isocranking calculations performed for isobaric analogue states in the A=14 and $A=40-56$ nuclei. We also present such results obtained for high-isospin states in $^{48}$Cr, with constraints on the isospin implemented by using the augmented Lagrange method.

Koichi Sato; Jacek Dobaczewski; Takashi Nakatsukasa; Wojciech Satu?a

2013-08-08T23:59:59.000Z

491

Open literature review of threats including sabotage and theft of fissile material transport in Japan.  

SciTech Connect

This report is a review of open literature concerning threats including sabotage and theft related to fissile material transport in Japan. It is intended to aid Japanese officials in the development of a design basis threat. This threat includes the external threats of the terrorist, criminal, and extremist, and the insider threats of the disgruntled employee, the employee forced into cooperation via coercion, the psychotic employee, and the criminal employee. Examination of the external terrorist threat considers Japanese demographics, known terrorist groups in Japan, and the international relations of Japan. Demographically, Japan has a relatively homogenous population, both ethnically and religiously. Japan is a relatively peaceful nation, but its history illustrates that it is not immune to terrorism. It has a history of domestic terrorism and the open literature points to the Red Army, Aum Shinrikyo, Chukaku-Ha, and Seikijuku. Japan supports the United States in its war on terrorism and in Iraq, which may make Japan a target for both international and domestic terrorists. Crime appears to remain low in Japan; however sources note that the foreign crime rate is increasing as the number of foreign nationals in the country increases. Antinuclear groups' recent foci have been nuclear reprocessing technology, transportation of MOX fuel, and possible related nuclear proliferation issues. The insider threat is first defined by the threat of the disgruntled employee. This threat can be determined by studying the history of Japan's employment system, where Keiretsu have provided company stability and lifetime employment. Recent economic difficulties and an increase of corporate crime, due to sole reliability on the honor code, have begun to erode employee loyalty.

Cochran, John Russell; Furaus, James Phillip; Marincel, Michelle K.

2005-06-01T23:59:59.000Z

492

RDI's Wisdom Way Solar Village Final Report: Includes Utility Bill Analysis of Occupied Homes  

SciTech Connect

In 2010, Rural Development, Inc. (RDI) completed construction of Wisdom Way Solar Village (WWSV), a community of ten duplexes (20 homes) in Greenfield, MA. RDI was committed to very low energy use from the beginning of the design process throughout construction. Key features include: 1. Careful site plan so that all homes have solar access (for active and passive); 2. Cellulose insulation providing R-40 walls, R-50 ceiling, and R-40 floors; 3. Triple-pane windows; 4. Airtight construction (~0.1 CFM50/ft2 enclosure area); 5. Solar water heating systems with tankless, gas, auxiliary heaters; 6. PV systems (2.8 or 3.4kWSTC); 7. 2-4 bedrooms, 1,100-1,700 ft2. The design heating loads in the homes were so small that each home is heated with a single, sealed-combustion, natural gas room heater. The cost savings from the simple HVAC systems made possible the tremendous investments in the homes' envelopes. The Consortium for Advanced Residential Buildings (CARB) monitored temperatures and comfort in several homes during the winter of 2009-2010. In the Spring of 2011, CARB obtained utility bill information from 13 occupied homes. Because of efficient lights, appliances, and conscientious home occupants, the energy generated by the solar electric systems exceeded the electric energy used in most homes. Most homes, in fact, had a net credit from the electric utility over the course of a year. On the natural gas side, total gas costs averaged $377 per year (for heating, water heating, cooking, and clothes drying). Total energy costs were even less - $337 per year, including all utility fees. The highest annual energy bill for any home evaluated was $458; the lowest was $171.

Robb Aldrich, Steven Winter Associates

2011-07-01T23:59:59.000Z

493

Molecular Beam and Surface Science Studies of Heterogeneous Reaction Kinetics Including Combustion Dynamics. Final Technical Report.  

SciTech Connect

This research program examined the heterogeneous reaction kinetics and reaction dynamics of surface chemical processes which are of direct relevance to efficient energy production, condensed phase reactions, and mateials growth including nanoscience objectives. We have had several notable scientific and technical successes. Illustrative highlights include: (1) a thorough study of how one can efficiently produce synthesis gas (SynGas) at relatively low Rh(111) catalyst temperatures via the reaction CH{sub4}+1/2 O{sub2} {r_arrow} CO+2H{sub2}. In these studies methane activation is accomplished utilizing high-kinetic energy reagents generated via supersonic molecular beams, (2) experiments which have incisively probed the partial oxidation chemistry of adsorbed 1- and 2- butene on Rh and ice, as well as partial oxidation of propene on Au; (3) investigation of structural changes which occur to the reconstructed (23x{radical}3)-Au(111) surface upon exposure to atomic oxygen, (4) a combined experimental and theoretical examination of the fundamental atomic-level rules which govern defect minimization during the formation of self-organizing stepped nanostructures, (5) the use of these relatively defect-free nanotemplates for growing silicon nanowires having atomically-dimensioned widths, (6) a combined scanning probe and atomic beam scattering study of how the presence of self-assembling organic overlayers interact with metallic supports substrates - this work hs led to revision of the currently held view of how such adsorbates reconfigure surface structure at the atomic level, (7) an inelastic He atom scattering study in which we examined the effect of chain length on the low-energy vibrations of alkanethiol striped phase self-assembled monolayers on Au(111), yielding information on the forces that govern interfacial self-assembly, (8) a study of the vibrational properties of disordered films of SF{sub6} adsorbed on Au(111), and (9) a study of the activated chemistry and photochemistry of NO on NiO/Ni. Innovative STM and molecular beam instrumentation has been fabricated to enable this program.

Sibener, S. J.

2006-06-23T23:59:59.000Z

494

A decision support system prototype including human factors based on the TOGA meta-theory approach  

SciTech Connect

The human contribution to the risk of operation of complex technological systems is often not negligible and sometimes tends to become significant, as shown by many reports on incidents and accidents occurred in the past inside Nuclear Power Plants (NPPs). An error of a human operator of a NPP can derive by both omission and commission. For instance, complex commission errors can also lead to significant catastrophic technological accidents, as for the case of the Three Mile Island accident. Typically, the problem is analyzed by focusing on the single event chain that has provoked the incident or accident. What is needed is a general framework able to include as many parameters as possible, i.e. both technological and human factors. Such a general model could allow to envisage an omission or commission error before it can happen or, alternatively, suggest preferred actions to do in order to take countermeasures to neutralize the effect of the error before it becomes critical. In this paper, a preliminary Decision Support System (DSS) based on the so-called (-) TOGA meta-theory approach is presented. The application of such a theory to the management of nuclear power plants has been presented in the previous ICAPP 2011. Here, a human factor simulator prototype is proposed in order to include the effect of human errors in the decision path. The DSS has been developed using a TRIGA research reactor as reference plant, and implemented using the LabVIEW programming environment and the Finite State Machine (FSM) model The proposed DSS shows how to apply the Universal Reasoning Paradigm (URP) and the Universal Management Paradigm (UMP) to a real plant context. The DSS receives inputs from instrumentation data and gives as output a suggested decision. It is obtained as the result of an internal elaborating process based on a performance function. The latter, describes the degree of satisfaction and efficiency, which are dependent on the level of responsibility related to each professional role. As an application, we present the simulation of the discussed error, e.g. the unchecked extraction of the control rods during a power variation maneuver and we show how the effect of human errors can affect the performance function, giving rise to different countermeasures which could call different operator figures into play, potentially not envisaged in the standard procedure. (authors)

Cappelli, M.; Memmi, F. [UTFISST, ENEA Casaccia, via Anguillarese 301, Rome (Italy); Gadomski, A. M. [ECONA, Centro Interuniv. Elaborazione Cognitiva Sistemi Naturali e Artificiali, via dei Marsi 47, Rome (Italy); Sepielli, M. [UTFISST, ENEA Casaccia, via Anguillarese 301, Rome (Italy)

2012-07-01T23:59:59.000Z

495

Funding for state, city, and county governments in the state includes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NE Nebraska Total Sum City, County, and SEO Allocations NE Nebraska Total Sum City, County, and SEO Allocations All $18,810,300 NE Nebraska State Energy Office $9,593,500 NE Bellevue City $194,200 NE Fremont City $106,400 NE Grand Island City $199,000 NE Hastings City $109,900 NE Kearney City $131,100 NE Lincoln City $2,401,000 NE Norfolk City $101,500 NE North Platte City $105,300 NE Omaha City $4,331,500 NE Papillion City $91,300 NE Cass County $99,900 NE Dakota County $87,300 NE Dawson County $106,300 NE Douglas County $255,800 NE Gage County $98,000 NE Lancaster County $110,300 NE Platte County $139,200 NE Sarpy County $312,600 NE Saunders County $80,600 NE Scotts Bluff County $155,600 In addition, today's announcement includes funding for the following Tribal

496

Funding for state, city, and county governments in the state includes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NM New Mexico Total Sum City, County, and SEO NM New Mexico Total Sum City, County, and SEO Allocations All $20,608,300 NM New Mexico State Energy Office $9,593,500 NM Alamogordo City $147,700 NM Albuquerque City $5,051,200 NM Carlsbad City $107,800 NM Clovis City $139,800 NM Farmington City $191,800 NM Hobbs City $128,700 NM Las Cruces City $888,000 NM Rio Rancho City $697,000 NM Roswell City $195,500 NM Santa Fe City $781,600 NM Bernalillo County $459,500 NM Dona Ana County $446,900 NM Grant County $126,400 NM McKinley County $299,600 NM Rio Arriba County $166,500 NM San Juan County $329,400 NM Sandoval County $169,500 NM Santa Fe County $264,000 NM Taos County $134,100 NM Valencia County $289,800 In addition, today's announcement includes funding for the following Tribal

497

Funding for state, city, and county governments in the state includes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NV NV Nevada Total Sum City, County, and SEO Allocations All $31,983,500 NV Nevada State Energy Office $9,593,500 NV Boulder City City $61,600 NV Carson City City $538,900 NV Elko City $76,500 NV Fernley City $52,000 NV Henderson City $2,237,000 NV Las Vegas City $5,449,200 NV Mesquite City $69,900 NV North Las Vegas City $1,907,400 NV Reno City $2,142,800 NV Sparks City $840,000 NV Churchill County $104,900 NV Clark County $7,663,500 NV Douglas County $195,000 NV Elko County $123,600 NV Humboldt County $75,600 NV Lyon County $165,200 NV Nye County $185,700 NV Pershing County $50,000 NV Washoe County $401,200 NV White Pine County $50,000 In addition, today's announcement includes funding for the following Tribal

498

SEARCHING FOR EXTRATERRESTRIAL INTELLIGENCE SIGNALS IN ASTRONOMICAL SPECTRA, INCLUDING EXISTING DATA  

SciTech Connect

The main purpose of this article is to make astronomers aware that Searches for Extraterrestrial Intelligence (SETIs) can be carried out by analyzing standard astronomical spectra, including those they have already taken. Simplicity is the outstanding advantage of a search in spectra. The spectra can be analyzed by simple eye inspection or a few lines of code that uses Fourier transform software. Theory, confirmed by published experiments, shows that periodic signals in spectra can be easily generated by sending light pulses separated by constant time intervals. While part of this article, like all articles on SETIs, is highly speculative the basic physics is sound. In particular, technology now available on Earth could be used to send signals having the required energy to be detected at a target located 1000 lt-yr away. Extraterrestrial Intelligence (ETI) could use these signals to make us aware of their existence. For an ETI, the technique would also have the advantage that the signals could be detected both in spectra and searches for intensity pulses like those currently carried out on Earth.

Borra, Ermanno F., E-mail: borra@phy.ulaval.ca [Centre d'Optique, Photonique et Laser, Departement de Physique, Universite Laval, Quebec G1 K 7P4 (Canada)

2012-12-01T23:59:59.000Z

499

A comparative assessment of the economics of plutonium disposition including comparison with other nuclear fuel cycles  

SciTech Connect

DOE has been evaluating three technologies for the disposition of approximately 50 metric tons of surplus plutonium from defense-related programs: reactors, immobilization, and deep boreholes. As part of the process supporting an early CY 1997 Record of Decision (ROD), a comprehensive assessment of technical viability, cost, and schedule has been conducted. Oak Ridge National Laboratory has managed and coordinated the life-cycle cost (LCC) assessment effort for this program. This paper discusses the economic analysis methodology and the results prior to ROD. Other objectives of the paper are to discuss major technical and economic issues that impact plutonium disposition cost and schedule. Also to compare the economics of a once-through weapons-derived MOX nuclear fuel cycle to other fuel cycles, such as those utilizing spent fuel reprocessing. To evaluate the economics of these technologies on an equitable basis, a set of cost estimating guidelines and a common cost-estimating format were utilized by all three technology teams. This paper also includes the major economic analysis assumptions and the comparative constant-dollar and discounted-dollar LCCs.

Williams, K.A.; Miller, J.W.; Reid, R.L.

1997-05-01T23:59:59.000Z

500

Applying environmental externalities to US Clean Coal Technologies for Asia. [Including external environmental costs  

SciTech Connect

The United States is well positioned to play an expanding role in meeting the energy technology demands of the Asian Pacific Basin, including Indonesia, Thailand, and the Republic of China (ROC-Taiwan). The US Department of Energy Clean Coal Technology (CCT) Demonstration Program provides a proving ground for innovative coal-related technologies that can be applied domestically and abroad. These innovative US CCTs are expected to satisfy increasingly stringent environmental requirements while substantially improving power generation efficiencies. They should also provide distinct advantages over conventional pulverized coal-fired combustors. Finally, they are expected to be competitive with other energy options currently being considered in the region. This paper presents potential technology scenarios for Indonesia, Thailand, and the ROC-Taiwan and considers an environmental cost-benefit approach employing a newly developed method of applying environmental externalities. Results suggest that the economic benefits from increased emission control can indeed be quantified and used in cost-benefit comparisons, and that US CCTs can be very cost effective in reducing emissions.

Szpunar, C.B.; Gillette, J.L.

1993-01-01T23:59:59.000Z