Sample records for improvement contractors receive

  1. Connecticut Weatherization Project Improves Lives, Receives National...

    Energy Savers [EERE]

    Families Energy and Money How to Save Energy, Money with Home Energy Upgrades Several energy-efficient improvements made to a senior care center in New Milford, Connecticut,...

  2. Radiant energy receiver having improved coolant flow control means

    DOE Patents [OSTI]

    Hinterberger, H.

    1980-10-29T23:59:59.000Z

    An improved coolant flow control for use in radiant energy receivers of the type having parallel flow paths is disclosed. A coolant performs as a temperature dependent valve means, increasing flow in the warmer flow paths of the receiver, and impeding flow in the cooler paths of the receiver. The coolant has a negative temperature coefficient of viscosity which is high enough such that only an insignificant flow through the receiver is experienced at the minimum operating temperature of the receiver, and such that a maximum flow is experienced at the maximum operating temperature of the receiver. The valving is accomplished by changes in viscosity of the coolant in response to the coolant being heated and cooled. No remotely operated valves, comparators or the like are needed.

  3. Solar Installation Contractor

    Broader source: Energy.gov [DOE]

    Alternate Title(s):General Contractor, Electrical or Plumbing Contractor, Construction Manager, Project Superintendant

  4. RECEIVED

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70COMMUNITYResponses:December 11, 2014 PageRDC ReceivesREAP40

  5. Receiver for solar energy collector having improved aperture aspect

    DOE Patents [OSTI]

    McIntire, William R. (Downers Grove, IL)

    1984-01-01T23:59:59.000Z

    A secondary concentrator for use in receiver systems for linear focusing primary concentrators is provided with reflector wings at each end. The wings increase the capture of light rays reflected from areas adjacent the rim of a primary concentrator, increasing the apparent aperture size of the absorber as viewed from the rim of the primary concentrator. The length, tilt, and curvature of the wing reflectors can be adjusted to provide an absorber having a desired aperture aspect.

  6. Peru modifies contractors' terms

    SciTech Connect (OSTI)

    Not Available

    1985-05-01T23:59:59.000Z

    With both proved hydrocarbon reserves and daily production figures in trouble, Peru has moved to make its participation contracts more attractive to foreign contractors. To reverse this downward trend, Petroperu officials are visiting U.S. companies to explain policy changes designed to make work in Peru more attractive. Peru has instituted a cost recovery concept for contractors that can be implemented with no change in current law. This system ensures the contractor recovery of his investment and grants a profit percentage inversely proportional to production, introducing more rational incentives for private investment without affecting state participation in the long run. Contractors can also work on a service contract in which all production goes to Petroperu in exchange for a predetermined tariff per barrel. A third option to foreign contractors is work on several secondary recovery projects scheduled to be performed.

  7. INL receives GreenGov Presidential Award for fleet fuel efficiency improvements

    SciTech Connect (OSTI)

    None

    2010-01-01T23:59:59.000Z

    Idaho National Laboratory has received a 2010 GreenGov Presidential Award for outstanding achievement in fuel efficiency in its bus and automotive fleets. The award was presented today in Washington, D.C., as part of a three-day symposium on improving sustainability and energy efficiency across the federal government. Lots more content like this is available at INL's facebook page http://www.facebook.com/idahonationallaboratory.

  8. INL receives GreenGov Presidential Award for fleet fuel efficiency improvements

    ScienceCinema (OSTI)

    None

    2013-05-28T23:59:59.000Z

    Idaho National Laboratory has received a 2010 GreenGov Presidential Award for outstanding achievement in fuel efficiency in its bus and automotive fleets. The award was presented today in Washington, D.C., as part of a three-day symposium on improving sustainability and energy efficiency across the federal government. Lots more content like this is available at INL's facebook page http://www.facebook.com/idahonationallaboratory.

  9. Improved power efficiency for very-high-temperature solar-thermal-cavity receivers

    DOE Patents [OSTI]

    McDougal, A.R.; Hale, R.R.

    1982-04-14T23:59:59.000Z

    This invention is an improved solar energy cavity receiver for exposing materials and components to high temperatures. The receiver includes a housing having an internal reflective surface defining a cavity and having an inlet for admitting solar radiation thereto. A photothermal absorber is positiond in the cavity to receive radiation from the inlet. A reflective baffle is positioned between the absorber and the inlet to severely restrict the re-radiation of energy through the inlet. The front surface of the baffle defines a narrow annulus with the internal reflective surface of the housing. The front surface of the baffle is contoured to reflect incoming radiation onto the internal surface of the housing, from which it is reflected through the annulus and onto the front surface of the absorber. The back surface of the baffle intercepts radiation from the front of the absorber. With this arrangement, a high percentage of the solar power input is retained in the cavity; thus, high internal temperatues are attained.

  10. CONTRACTOR REPORT SAND927005

    E-Print Network [OSTI]

    CONTRACTOR REPORT SAND92­7005 Unlimited Release UC­261 Fatigue of Fiberglass Wind Turbine Blade WIND TURBINE BLADE MATERIALS J.F. Mandell, R.M. Reed, D.D. Samborsky Montana State University Bozeman in wind turbine blades has been explored. Coupon testing was carried out under constant amplitude tensile

  11. Contractor Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-11-05T23:59:59.000Z

    This Manual establishes requirements for the management and operation of the U.S. Department of Energy contractor protective forces. Cancels: DOE M 470.4-3 Chg 1, CRD (Attachment 2) only, except for Section C. Canceled by DOE O 473.3.

  12. Improved high temperature solar absorbers for use in Concentrating Solar Power central receiver applications.

    SciTech Connect (OSTI)

    Stechel, Ellen Beth; Ambrosini, Andrea; Hall, Aaron Christopher; Lambert, Timothy L.; Staiger, Chad Lynn; Bencomo, Marlene

    2010-09-01T23:59:59.000Z

    Concentrating solar power (CSP) systems use solar absorbers to convert the heat from sunlight to electric power. Increased operating temperatures are necessary to lower the cost of solar-generated electricity by improving efficiencies and reducing thermal energy storage costs. Durable new materials are needed to cope with operating temperatures >600 C. The current coating technology (Pyromark High Temperature paint) has a solar absorptance in excess of 0.95 but a thermal emittance greater than 0.8, which results in large thermal losses at high temperatures. In addition, because solar receivers operate in air, these coatings have long term stability issues that add to the operating costs of CSP facilities. Ideal absorbers must have high solar absorptance (>0.95) and low thermal emittance (<0.05) in the IR region, be stable in air, and be low-cost and readily manufacturable. We propose to utilize solution-based synthesis techniques to prepare intrinsic absorbers for use in central receiver applications.

  13. Efficiency First - Contractor Outreach: Design & Implementation...

    Energy Savers [EERE]

    Efficiency First - Contractor Outreach: Design & Implementation for Residential Retrofit Programs Efficiency First - Contractor Outreach: Design & Implementation for Residential...

  14. Targeting Contractors That Target Moderate Income Homeowners

    Broader source: Energy.gov [DOE]

    Provides an overview of the services provided by EGIA including business development webinars, a contractor exchange, and contractor recognition.

  15. Contractors | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsNovember 13, 2014 BuildingEnergyEnergyConsortiumContactsContractors

  16. Management and operating contractor plan for transition to the project Hanford Management Contractor

    SciTech Connect (OSTI)

    Waite, J.L., Westinghouse Hanford

    1996-06-27T23:59:59.000Z

    This is Revision 1 to the M{ampersand}O Contractor Plan for Transition to the Project Hanford Management Contractor.

  17. Engaging and Growing Small Contractor Businesses | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Growing Small Contractor Businesses Engaging and Growing Small Contractor Businesses Better Buildings Neighborhood Program Workforce Peer Exchange Call: Engaging and Growing...

  18. Report on audit of Department of Energy`s contractor salary increase fund

    SciTech Connect (OSTI)

    NONE

    1997-04-04T23:59:59.000Z

    The Department of Energy (Department) uses contractors to operate its facilities and compensates contractor employees based on their skills, complexity of jobs, and work performance. Thirty-one of the Department`s major contractors reported a total payroll of $4.3 billion and $4.4 billion during 1994 and 1995, respectively. The 31 contractors also reported awarding salary increases of $18 million for 1994 and $200 million for 1995. The purpose of the audit was to review the process used to determine and approve the amount of salary increases for contractor employees. The specific audit objective was to determine whether salary increases received by contractor employees were in accordance with Departmental policies and procedures. The Department of Energy Acquisition Regulation (DEAR) requires that contractor salary actions be within specific limitations, supportable, and approved prior to incurrence of costs. In addition, the Secretary of Energy imposed a 1 year salary freeze on the merit portion of management and operating contractor employee salaries for each contractor`s Fiscal Year 1994 compensation year. However, a fund for promotions and adjustments was approved but limited to 0.5 percent of payroll for the year. A review of eight major contractors showed that six complied with the Department`s policies on salary increases. The other two gave salary increases that were not always in accordance with Departmental policies. This resulted in both contractors not fully complying with the pay freeze in 1994 and exceeding their salary increase fund budgets in 1995. If these two contractors had implemented Department and contract requirements and contracting officers had properly performed their contract administrative responsibilities concerning salary increase funds, both contractors would have frozen salary increases and would not have exceeded their annual budgets.

  19. Contractor Human Resource Management Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30T23:59:59.000Z

    The purpose of this directive is to establish Department of Energy (DOE) responsibilities and requirements for the management and oversight of contractor Human Resource Management (HR) programs. Chg 1, 5-8-98; Chg 2, 11-22-09

  20. Contractor Human Resource Management Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30T23:59:59.000Z

    The purpose of this directive is to establish Department of Energy (DOE) responsibilities and requirements for the management and oversight of contractor Human Resource Management (HR) programs. Chg 1, 5-8-98; Chg 2, 11-22-09.

  1. Executing major projects through Contractors

    E-Print Network [OSTI]

    McKenna, Nicholas A. (Nicholas Alan)

    2005-01-01T23:59:59.000Z

    Project based organizational structures are utilized in many industries. The firms engaged in these significant endeavors, project sponsor and contractor alike, risk both capital and reputation in the market-place with ...

  2. DOE final report, phase one startup, Waste Receiving and Processing Facility (WRAP)

    SciTech Connect (OSTI)

    Jasen, W.G.

    1998-01-07T23:59:59.000Z

    This document is to validate that the WRAP facility is physically ready to start up phase 1, and that the managers and operators are prepared to safely manage and operate the facility when all pre-start findings have been satisfactorily corrected. The DOE Readiness Assessment (RA) team spent a week on-site at Waste Receiving and Processing Module 1 (WRAP-1) to validate the readiness for phase 1 start up of facility. The Contractor and DOE staff were exceptionally cooperative and contributed significantly to the overall success of the RA. The procedures and Conduct of Operations areas had significant discrepancies, many of which should have been found by the contractor review team. In addition the findings of the contractor review team should have led the WRAP-1 management team to correcting the root causes of the findings prior to the DOE RA team review. The findings and observations include many issues that the team believes should have been found by the contractor review and corrective actions taken. A significantly improved Operational Readiness Review (ORR) process and corrective actions of root causes must be fully implemented by the contractor prior to the performance of the contractor ORR for phase 2 operations. The pre-start findings as a result of this independent DOE Readiness Assessment are presented.

  3. Contractor Rating and Feedback Systems | Department of Energy

    Energy Savers [EERE]

    Contractor Rating and Feedback Systems Contractor Rating and Feedback Systems Better Buildings Residential Workforce Business Partners Peer Exchange Call Series: Contractor Rating...

  4. Trends in Contractor Conversion Rates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contractor Conversion Rates Trends in Contractor Conversion Rates Better Buildings Residential Network Workforce Business Partners Peer Exchange Call Series: Trends in Contractor...

  5. Better Buildings Neighborhood Program Business Models Guide: Contractor/Retailer Description

    Broader source: Energy.gov [DOE]

    The home improvement market includes a range of private-sector entities that currently provide or could offer home energy upgrade services. Most of these entities are remodelers, HVAC (heating, ventilation, and air conditioning) contractors, home performance contractors, or retailers; other actors are present in the sector (such as window installers and insulators), but this analysis focuses on these four main categories.

  6. WIPP contractor receives VPP Legacy of Stars Award 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CARLSBAD, N.M., September 20, 2013 - The U.S. Department of Energy (DOE) recognized Nuclear Waste Partnership LLC (NWP), the Waste Isolation Pilot Plant (WIPP) management and...

  7. Strategic Petroleum Reserve Contractor to Receive 2005 Malcolm...

    Broader source: Energy.gov (indexed) [DOE]

    Schools, Jenks, Okla. (education); and Bronson Methodist Hospital, Kalamazoo, Mich. (health care). Additional information can be found at the two web sites below: nist.gov...

  8. WIPP Security Contractor Receives DOE Voluntary Protection Program Award |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradley Nickell Director of TransmissionMedia WIPP Update

  9. DOE Strategic Petroleum Reserve Contractor Receives the Baldrige Award |

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout »DepartmentLaboratory | DepartmentCoal Plantfor|Department

  10. Cleanup Contractor at Paducah Site Receives Performance Excellence Award |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO OverviewAttachments4 Chairs Meeting - AprilEvents Clean EnergyofDepartment of EEREStatus

  11. Strategic Petroleum Reserve Contractor to Receive 2005 Malcolm Baldrige

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCO OverviewRepositoryManagementFacility inStatementDepartment of

  12. DOE Strategic Petroleum Reserve Contractor Receives the Baldrige Award |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractions andDefinition ofthe

  13. Cleanup Contractor at Paducah Site Receives Performance Excellence Award |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave the White Flag" |Energy Diesel:DepartmentDiesel

  14. WIPP contractor receives VPP Legacy of Stars Award 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsing Maps1DOE Awards Contract for19, 20142,pril

  15. Savannah River Site Contractor Receives Project Management Institute Award

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSARDevelopmentalEfficiency | DepartmentSavannah River41-HW State|

  16. Raman Lidar Receives Improvements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising funds for a cure Raising2 Raman Lidar

  17. Strategies for Aligning Program Demand with Contractor's Seasonal...

    Energy Savers [EERE]

    Aligning Program Demand with Contractor's Seasonal Fluctuations Strategies for Aligning Program Demand with Contractor's Seasonal Fluctuations Better Buildings Neighborhood Program...

  18. Contractor Human Resource Management Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-29T23:59:59.000Z

    This directive establishes DOE responsibilities and requirements for the management and oversight of contractor Human Resource Management (HR) programs. Chg 1, 5-8-98; Chg 2, 11-22-09; Chg 3, 2-23-10; Chg 4, 4-29-13. DOE O 350.1 Chg 5, dated 9-30-2014, cancels Chapters I-III of DOE O 350.1 Chg 4

  19. Contractor Human Resource Management Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30T23:59:59.000Z

    The purpose of this directive is to establish Department of Energy (DOE) responsibilities and requirements for the management and oversight of contractor Human Resource Management (HR) programs. Chg 1, 5-8-98; Chg 2, 11-22-09; Chg 3, 2-23-10; Chg 4, 4-29-13. This order cancels DOE O 3220.1A, DOE O 3220.4A, DOE O 3220.6A, and DOE O 3309.1A.

  20. Contractor

    Broader source: Energy.gov (indexed) [DOE]

    Price-Anderson Group Bechtel National, Inc. BNFL, Inc. BWX Technologies, Inc. Duke Engineering & Services, Inc. Fluor Corporation Johnson Controls World Services Corporation...

  1. CONTRACTOR:

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling Corp -KWatertowni5W 95.5

  2. Contractor Human Resource Management Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30T23:59:59.000Z

    This directive establishes DOE responsibilities and requirements for the management and oversight of contractor Human Resource Management (HR) programs. Chg 1, 5-8-98; Chg 2, 11-22-09; Chg 3, 2-23-10; Chg 4, 4-29-13. DOE O 350.1 Chg 5, dated 9-30-2014, cancels DOE O 350.1 Chg 4. The Order is revised to reflect the cancellation of Chapters 1-3 due to the incorporation of these chapters into DOE Order 350.3; reflect organizational changes; delete reference to the DOE Retrospective Rating Insurance Plan, which is no longer available; remove the CRD from Chapter VII.

  3. Construction Contractor Checklist | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Contractor Checklist For small businesses seeking contracting opportunities with Argonne in the constructiondemolition field, please be sure you have taken the...

  4. Contractor's Assignment of Refunds, Rebates, Credits, and

    E-Print Network [OSTI]

    Myers, Lawrence C.

    Contractor's Assignment of Refunds, Rebates, Credits, and Other Amounts National Aeronautics Officer certified checks(made payable to the National Aeronautics and Space Administration)for any

  5. Emergency preparedness for the small oilfield contractor

    SciTech Connect (OSTI)

    Reavis, H.C.

    1995-12-01T23:59:59.000Z

    Changes in the oil and gas industry have been dramatic in recent years. Operators have consolidated field office facilities and downsized staffing at many of their remaining facilities. As a result, operators are turning to independent Contractors as a method of controlling both peak personnel demands and selected production functions. With these changes in the business environment, the role of the specialized contractor has been greatly expanded. Tasks Diane performed by operator employees are now ongoing services provided by the contractor. Their performance can Taken be exemplary until a major emergency occurs. Emergency response can no longer be considered a secondary issue. Every contractor, small or large, must be equally prepared for an emergency. Their ability to address emergency incidents will have a direct effect in their success. This paper is a presentation of the actual learning experiences of one oilfield contractor confronted with the ask of emergency preparedness, more specifically a small contractor. Oilfield service contractors commonly employ field personnel who work for extended periods of time without direct supervision. These employees may singularly or collectively float between sites or anchor one site. Operating sites might be localized or spread over a vast geographical area. Because of the uniqueness of their situation, direct supervision is minimal and the employees will shoulder greater responsibilities and authority. The contractor must evaluate operating conditions and develop an approach which will achieve the optimum results.

  6. Statement of Work - Optional Service Offerings for Contractor...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work - Optional Service Offerings for Contractor-Identified Project Statement of Work - Optional Service Offerings for Contractor-Identified Project Spreadsheet features optional...

  7. DOE Selects Seven Contractors for Waste Treatment Basic Ordering...

    Office of Environmental Management (EM)

    Selects Seven Contractors for Waste Treatment Basic Ordering Agreements DOE Selects Seven Contractors for Waste Treatment Basic Ordering Agreements June 4, 2015 - 12:00pm Addthis...

  8. Policy Flash: 2013-52 Contractor Legal Management Requirements...

    Broader source: Energy.gov (indexed) [DOE]

    Flash: 2013-52 Contractor Legal Management Requirements: Final Rule Policy Flash: 2013-52 Contractor Legal Management Requirements: Final Rule Questions concerning this policy...

  9. assessing contractor selection: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    year. The automobile industry is therefore a very emblematic sector for best practices of LCA Boyer, Edmond 12 Contractor Area induction checklist checklist 11 Oct 2007 CONTRACTOR...

  10. Programs: Operating as a Prime Contractor | Department of Energy

    Energy Savers [EERE]

    Operating as a Prime Contractor Better Buildings Residential Network Program Sustainability Peer Exchange Call: Operating as a Prime Contractor, Call Slides and Discussion...

  11. Better Buildings: Workforce, Spotlight on Maine: Contractor Sales...

    Energy Savers [EERE]

    Workforce, Spotlight on Maine: Contractor Sales Training Boosts Energy Upgrade Conversions Better Buildings: Workforce, Spotlight on Maine: Contractor Sales Training Boosts Energy...

  12. DOE Seeks Contractor for Depleted Uranium Hexafluoride (DUF6...

    Energy Savers [EERE]

    Contractor for Depleted Uranium Hexafluoride (DUF6) Operations at Ohio and Kentucky Facilities DOE Seeks Contractor for Depleted Uranium Hexafluoride (DUF6) Operations at Ohio and...

  13. Department of Energy Honors Hanford Site Contractor for Employee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Honors Hanford Site Contractor for Employee Involvement and Management Leadership in Safety and Health Department of Energy Honors Hanford Site Contractor for Employee Involvement...

  14. Solar Hot Water Contractor Licensing

    Broader source: Energy.gov [DOE]

    In order to be eligible for Maine's solar thermal rebate program, systems must be installed by licensed plumbers who have received additional certification for solar thermal systems from the North...

  15. Better Buildings - Concierge Programs for Contractors - They...

    Energy Savers [EERE]

    How Local Ties Lead to Local Wins Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It 4th U.S.-China Energy Efficiency Forum Documents...

  16. Selling Geothermal Systems The "Average" Contractor

    E-Print Network [OSTI]

    Selling Geothermal Systems #12;The "Average" Contractor · History of sales procedures · Manufacturer Driven Procedures · What makes geothermal technology any harder to sell? #12;"It's difficult to sell a geothermal system." · It should

  17. List of Contractors to Support Anthrax Remediation

    SciTech Connect (OSTI)

    Judd, Kathleen S.; Lesperance, Ann M.

    2010-05-14T23:59:59.000Z

    This document responds to a need identified by private sector businesses for information on contractors that may be qualified to support building remediation efforts following a wide-area anthrax release.

  18. Fifth technical contractors' conference on peat

    SciTech Connect (OSTI)

    Not Available

    1982-01-01T23:59:59.000Z

    The Fifth Technical Contractors' Conference on Peat was held April 28 to 29, 1982, at Bethesda, Maryland. Thirty papers have been entered into EDB and ERA; two had been entered previously from other sources. (LTN)

  19. OIA: Office of Contractor Assurance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for science, best management practices, and continuous improvement are achieved at LBNL. The OCA is an internal independent assurance organization, and is authorized to have...

  20. Office of Inspector General report on audit of Department of Energy management and operating contractor available fees

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    The Office of Procurement and Assistance Management has proposed changes to the method used to annually calculate and negotiate ``for profit`` management and operating contractor available fees. This proposal will increase contractor fees in exchange for the contractor`s purported assumption of additional risk. In 1991, the Department, through the Accountability Rule, increased contractor fees as an incentive to improve contractor performance and accountability. Despite the lack of measurable benefits of this effort, the Department is crafting a new fee policy which will, depending upon how it is executed, increase fees above the amount provided through the Accountability Rule as an incentive to the Department`s management and operating contractors. The objective of the audit was to determine whether the Department`s proposed change to the fee structure for determining management and operating contractor fees will be cost effective. This report describes the study`s approach, its findings and recommendations, management and auditor comments, and includes appendices with further data.

  1. Audit of the Department of Energy`s management of field contractor employees assigned to headquarters and other federal agencies

    SciTech Connect (OSTI)

    NONE

    1997-12-05T23:59:59.000Z

    The Department of Energy (Department) has spent at least $76 million annually for field contractor employee support in Headquarters and other Federal agencies. The employees were to provide technical expertise and experience critical to Department operations and programs. Overall, the audit was performed to determine if the Department was managing the use of field contractor employees assigned to Headquarters and other Federal agencies. Specifically, it was to determine whether the Department reviews and evaluates the costs for the use of contractor employees, is reimbursed for contractors working at other Federal agencies, and had implemented corrective actions proposed as the result of a prior audit report on this subject. The Department did not effectively manage the use of field contractor employees assigned to Headquarters and other Federal agencies. Specifically, the Department was unable to identify all contractor employees assigned to the Washington, DC area or determine the total cost of maintaining them; some employees were providing routine support and administrative services rather than unique program expertise; and several of the Department`s contractors had assigned their employees to work in other agencies without receiving full reimbursement for their services. In addition, the Department did not fully implement the corrective actions it agreed to in the prior audit report. Recommendations were made for the Deputy Secretary based on the audit findings. 3 tabs.

  2. Statement of Work (SOW) Template (Combined EIR/ICE Support Contractor...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statement of Work (SOW) Template (Combined EIRICE Support Contractor) Statement of Work (SOW) Template (Combined EIRICE Support Contractor) Contractor SOW Template - EIR &...

  3. Idaho Cleanup Contractor Surpasses Significant Safety Milestones

    Broader source: Energy.gov [DOE]

    IDAHO FALLS, Idaho – For the second time in a little over a year, employees with DOE contractor CH2M-WG Idaho (CWI) supporting EM at the Idaho site have achieved 1 million hours without a recordable injury. They also worked more than 1.7 million hours without a lost work-time injury.

  4. CONTRACTOR REPORT SAND97-3002

    E-Print Network [OSTI]

    presents a detailed analysis of the results from fatigue studies of wind turbine blade composite materials are evident in the range of materials currently used in many blades. A preliminary evaluation of knockdownsCONTRACTOR REPORT SAND97-3002 Unlimited Distribution UC-1210 DOE/MSU COMPOSITE MATERIAL FATIGUE

  5. Contractor Employee Pension and Medical Benefits Policy

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-06-19T23:59:59.000Z

    To ensure that reimbursement of costs incurred by Department of Energy (DOE) contractors' pension and medical benefits are reasonable in accordance with applicable laws, regulations and contract requirements and reflect prudent business practices. This directive has been suspended as of June 19, 2006, for 1 year. For more information, see DOE N 251.66.

  6. CONTRACTOR ASBESTOS INFORMATION ASBESTOS MANAGEMENT AT SFU

    E-Print Network [OSTI]

    CONTRACTOR ASBESTOS INFORMATION ASBESTOS MANAGEMENT AT SFU An extensive Asbestos Survey has been term Asbestos Management Program was approved by the Workers' Compensation Board of British Columbia. Note: There is a possibility that ACM containing materials may not have been identified or labeled

  7. Environmental Program Description for the Tank Farm Contractor

    SciTech Connect (OSTI)

    POWELL, P.A.

    2000-04-20T23:59:59.000Z

    This Environmental Program Description has been developed in support of the Integrated Environmental, Safety, and Health Management System and consistent with the goals of DOE/RL-96-50, Hanford Strategic Plan. This Environmental Program Plan was developed in support of the Integrated Environment, Safety, and Health Management System Description for the Tank Farm Contractor (ISMS) (RPP-MP-003), which establishes a single, defined environmental, safety, and health management system that integrates requirements into the work planning and execution processes to protect workers, the public, and the environment. The ISMS also provides mechanisms for increasing worker involvement in work planning, including hazard and environmental impact identification, analysis, and control; work execution; and feedback/improvement processes. The ISMS plan consists of five core functions. Each section of this plan describes the activities (formerly known as the Tank Waste Remediation System) of the Tank Farm Contractor (TFC) environmental organization according to the following core functions: Establish Environmental Policy and Define Work Scope; Identify Hazards, Environmental Impacts, and Requirements; Analyze Hazards and Environmental Impacts and Implement Controls; Provide Feedback and Continuous Improvement; and Perform Work within Controls.

  8. Exotic drilling: contractor drills pipelines

    SciTech Connect (OSTI)

    McReynolds, L.

    1980-04-01T23:59:59.000Z

    Drilling of pipelines has been technologically developed for applications such as river crossings, tunnelling through tar-sand or oil-shale strata for more effective in situ combustion production projects, and drilling inside rather than through heavy oil pays to create extensive horizontal well bores suitable for steam heating the formation. The horizontal drilling concept for river crossing involves installation of pipelines in an inverted arc 25 to 100 ft below a river bed. The directional control required to produce a curved hole is maintained by rotating the bit without rotating the pipe. When the drill string is activated by a forward thrust, it creates a reactive subsurface pressure against the front surface of the bent sub, thus causing the bend. The bit then deviates in the direction of the bend. Little disruption of the environment occurs, and the directionally drilled crossings offer improved pipeline security, maintenance of year-round construction schedules, easier permitting, no navigational hazards or interruption for waterway traffic, elimination of bank restoration costs and most repair costs, and a maintenance-free crossing section.

  9. Better Buildings Neighborhood Program Business Models Guide: Contractor/Retailer Business Models

    Broader source: Energy.gov [DOE]

    Business models information focused on remodelers, HVAC (heating, ventilation, and air conditioning) contractors, home performance contractors, or retailers.

  10. Needs of Non Energy-Focused Contractors

    SciTech Connect (OSTI)

    Liaukus, C.

    2012-12-01T23:59:59.000Z

    To better understand the informational needs of non energy-focused contractors, including what information they need to motivate them to become energy-focused, the BARA team studied the type of information provided by the national programs, trade associations, and manufacturers that were researched for the related technical report: Effective Communication of Energy Efficiency. While that report focused on the delivery method, format, and strategy of the information, this study examines the content being put forward.

  11. Building America Expert Meeting Report: Transitioning Traditional HVAC Contractors to Whole House Performance Contractors

    SciTech Connect (OSTI)

    Burdick, A.

    2011-10-01T23:59:59.000Z

    This report outlines findings resulting from a U.S. Department of Energy Building America expert meeting to determine how HVAC companies can transition from a traditional contractor status to a service provider for whole house energy upgrade contracting. IBACOS has embarked upon a research effort under the Building America Program to understand business impacts and change management strategies for HVAC companies. HVAC companies can implement these strategies in order to quickly transition from a 'traditional' heating and cooling contractor to a service provider for whole house energy upgrade contracting. Due to HVAC service contracts, which allow repeat interaction with homeowners, HVAC companies are ideally positioned in the marketplace to resolve homeowner comfort issues through whole house energy upgrades. There are essentially two primary ways to define the routes of transition for an HVAC contractor taking on whole house performance contracting: (1) Sub-contracting out the shell repair/upgrade work; and (2) Integrating the shell repair/upgrade work into their existing business. IBACOS held an Expert Meeting on the topic of Transitioning Traditional HVAC Contractors to Whole House Performance Contractors on March 29, 2011 in San Francisco, CA. The major objectives of the meeting were to: Review and validate the general business models for traditional HVAC companies and whole house energy upgrade companies Review preliminary findings on the differences between the structure of traditional HVAC Companies and whole house energy upgrade companies Seek industry input on how to structure information so it is relevant and useful for traditional HVAC contractors who are transitioning to becoming whole house energy upgrade contractors Seven industry experts identified by IBACOS participated in the session along with one representative from the National Renewable Energy Laboratory (NREL). The objective of the meeting was to validate the general operational profile of an integrated whole house performance contracting company and identify the most significant challenges facing a traditional HVAC contractor looking to transition to a whole house performance contractor. To facilitate the discussion, IBACOS divided the business operations profile of a typical integrated whole house performance contracting company (one that performs both HVAC and shell repair/upgrade work) into seven Operational Areas with more detailed Business Functions and Work Activities falling under each high-level Operational Area. The expert panel was asked to review the operational profile or 'map' of the Business Functions. The specific Work Activities within the Business Functions identified as potential transition barriers were rated by the group relative to the value in IBACOS creating guidance ensuring a successful transition and the relative difficulty in executing.

  12. An accounting manual for construction contractors

    E-Print Network [OSTI]

    Whatley, James R

    1951-01-01T23:59:59.000Z

    the problem of income reporting at its 1938 meting. The committee concluded that it is generally better practice to include calcu3ated profits or losses on uncompleted contracts in the current incove statement. The committee recognised that there are cases... established to cover the liability to correct any defects in nnLterials and/ar worhmanship assumed by a contractor under the terms of a contract. The amaunt of such a liability nnMt be determined fram past experience or based on the general practice oi...

  13. Contractor Past Performance Information | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy ContractContractor Past

  14. Contractor Past Performance Information | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy ContractContractor

  15. Contractor Political Activity Q&A

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy ContractContractor

  16. Contractor: Contract Number: Contract Type: Total Estimated

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergyContractor: Contract Number:

  17. DOE / Contractor Resources | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management Fermi SitePART I SECTION ADMSEDOE / Contractor Resources

  18. Revenue From Contractor Fees | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy at Waste-to-Energy usingofRetrofitting Doors on OpenRevenue From Contractor

  19. Labor Standards Compliance, Contractor Labor Relations, and Contractor Workforce Restructuring Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-04-07T23:59:59.000Z

    The Order ensures that DOE and NNSA management and operating and other facility management contractors pursue collective bargaining practices that promote efficiency and economy in contract operations, judicious expenditure of public funds, equitable resolution of disputes, and effective collective bargaining relationships.

  20. EM Contractor Reaps Benefits of Continuous Improvement Culture | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised FindingDepartmentDepartmentStatementEnergy EMEMof Energy Reaps

  1. Contractor Work Planning and Control Lessons Learned from DOE...

    Broader source: Energy.gov (indexed) [DOE]

    Work Planning and Control Lessons Learned from DOE and International Projects Contractor Work Planning and Control Lessons Learned from DOE and International Projects Addthis...

  2. Effective Loan Program Design and Integration with Contractors...

    Broader source: Energy.gov (indexed) [DOE]

    Financing and Revenue Peer Exchange Call Series: Effective Loan Program Design and Integration with Contractors, July 24, 2014, Call Slides and Discussion Summary. Call Slides...

  3. DOE Selects Contractor for California Energy Technology Engineering...

    Broader source: Energy.gov (indexed) [DOE]

    California Energy Technology Engineering Center Cleanup DOE Selects Contractor for California Energy Technology Engineering Center Cleanup June 26, 2014 - 12:00pm Addthis Media...

  4. PIA - Savannah River Site Management and Operating Contractor...

    Energy Savers [EERE]

    Management and Operating Contractor (HRMS) More Documents & Publications PIA - Savannah River Nuclear Solutions (SRNS) Human Resource Management System (HRMS) Integrated Safety...

  5. Audit of Department of Energy Contractor Occupational Injury...

    Energy Savers [EERE]

    the Department's contractors--the University of California (Lawrence Livermore National Laboratory), Westinghouse Savannah River Company, and Wackenhut Services, Inc. (Savannah...

  6. DOE/NNSA Facility Management Contracts Facility Owner Contractor

    Broader source: Energy.gov (indexed) [DOE]

    NNSA Facility Management Contracts Facility Owner Contractor Award Date End Date OptionsAward Term Ultimate Potential Expiration Date Contract FY Competed Parent Companies LLC...

  7. Strategies for Building Contractor Interest in Program Participation...

    Energy Savers [EERE]

    business partner peer exchange call discussed strategies for building contractor interest in program participation. Call Slides and Summary More Documents & Publications...

  8. Plug-In Electric Vehicle Handbook for Electrical Contractors (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    This handbook answers basic questions about plug-in electric vehicles, charging stations, charging equipment, charging equipment installation, and training for electrical contractors.

  9. Technical Assistance Contractor management plan. Revision 1

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) as the prime contractor and three teaming partner subcontractors: Roy F. Weston, Inc. (RFW), AGRA Earth and Environmental, Inc. (AGRA), and Geraghty and Miller, Inc. (G and M). The TAC contract`s scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both Surface and Ground Water Projects. The TAC team supports the DOE in completing surface remedial action and initiating ground water remediation work for start-up, characterization, compliance planning, design, construction oversight, and remedial operations. The TAC provides the DOE UMTRA Project Team with a dedicated management, scientific, and technical resource base in Albuquerque, New Mexico, which is supplemented by corporate resources. A carefully developed and maintained staff of technical experts is available to assess, analyze, develop, and execute cost-effective solutions to the demanding technical and institutional problems presented by the UMTRA Project.

  10. NEW - DOE O 350.3, Labor Standards Compliance, Contractor Labor Relations, and Contractor Workforce Restructuring Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    To ensure that contractors pursue collective bargaining practices that promote efficiency and economy in contract operations, judicious expenditure of public funds, equitable resolution of disputes, and effective collective bargaining relationships; that contractor relations/human resources specialists achieve consultations with management and operating contractors; and that appropriate labor standards are included in DOE/NNSA contracts and subcontracts. Cancels Chapters I-III of DOE O 350.1 Chg 4. Does not cancel other directives.

  11. Solicitation and Selection of Partner Projects, Technical Team Leads, and Measurement and Validation Contractors for the American Recovery and Reinvestment Act (ARRA) Funded Commercial Building Partnerships (CBP-2)

    SciTech Connect (OSTI)

    Nesse, Ronald J.; Baechler, Michael C.; Iverson, Megan M.

    2010-09-30T23:59:59.000Z

    In March 2010, Pacific Northwest National Laboratory (PNNL) joined two other labs receiving ARRA funding, Lawrence Berkeley National Laboratory (LBNL) and the National Renewable National Laboratory (NREL), to began weekly conference calls with the goal of coordinating a joint lab solicitation to support the ARRA-funded CBP project. Two solicitations were identified for: 1) new CBP Partners; 2) technical contractors to provide technical assistance and measurement and verification (M&V) contractors. The M&V contractors support the work by providing model reviews and conducting monitoring studies to verify building performance. This report documents the process used by the labs for the solicitations, and describes the process and outcomes for PNNL, selection of candidate Partners, technical teams, and M&V contractors.

  12. Contractor Health & Safety To whom does this apply?

    E-Print Network [OSTI]

    Anderson, Jim

    the contractors, for example, if the work is in a `hazardous area' (as defined below). The University's duty to contractor staff. What is a `hazardous area' in this context? Laboratories, workshops, clean rooms, test; and areas where hazardous chemicals, sources of ionising radiation, class 3B or class 4 lasers, biological

  13. The University of Oklahoma Independent Contractor or Consultant Guidelines

    E-Print Network [OSTI]

    Oklahoma, University of

    The University of Oklahoma Independent Contractor or Consultant Guidelines Purpose .................................................................................. 7 #12;University of Oklahoma Independent Contractor Guidelines - (Revised 11/2012) pg. 2 Purpose) for the University of Oklahoma and is the result of collaboration between Human Resources and Financial Services

  14. Carlsbad Field Office Technical Assistance Contractor Shares In Top Honor

    Broader source: Energy.gov [DOE]

    CARLSBAD, N.M. – The Carlsbad Field Office Technical Assistance Contractor’s (CTAC) parent company, Portage, Inc., and its 400 employees nationwide recently achieved a significant milestone by exceeding one million hours worked over 560 days without a lost-time injury or illness.

  15. Central solar energy receiver

    DOE Patents [OSTI]

    Drost, M. Kevin (Richland, WA)

    1983-01-01T23:59:59.000Z

    An improved tower-mounted central solar energy receiver for heating air drawn through the receiver by an induced draft fan. A number of vertically oriented, energy absorbing, fin-shaped slats are radially arranged in a number of concentric cylindrical arrays on top of the tower coaxially surrounding a pipe having air holes through which the fan draws air which is heated by the slats which receive the solar radiation from a heliostat field. A number of vertically oriented and wedge-shaped columns are radially arranged in a number of concentric cylindrical clusters surrounding the slat arrays. The columns have two mirror-reflecting sides to reflect radiation into the slat arrays and one energy absorbing side to reduce reradiation and reflection from the slat arrays.

  16. Mentoring and Job Training in the Field for Newly Trained Contractors...

    Energy Savers [EERE]

    Mentoring and Job Training in the Field for Newly Trained Contractors Mentoring and Job Training in the Field for Newly Trained Contractors Better Buildings Neighborhood Program...

  17. Policy Flash 2013-39 Acquisition Guide, Chapter 42.15, Contractor...

    Broader source: Energy.gov (indexed) [DOE]

    9 Acquisition Guide, Chapter 42.15, Contractor Performance Information Policy Flash 2013-39 Acquisition Guide, Chapter 42.15, Contractor Performance Information Attached is Policy...

  18. Cost-Effective, Customer-Focused, and Contractor-Focused Data...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Effective, Customer-Focused, and Contractor-Focused Data Tracking Systems Cost-Effective, Customer-Focused, and Contractor-Focused Data Tracking Systems Better Buildings...

  19. Radiation receiver

    DOE Patents [OSTI]

    Hunt, A.J.

    1983-09-13T23:59:59.000Z

    The apparatus for collecting radiant energy and converting same to alternate energy form includes a housing having an interior space and a radiation transparent window allowing, for example, solar radiation to be received in the interior space of the housing. Means are provided for passing a stream of fluid past said window and for injecting radiation absorbent particles in said fluid stream. The particles absorb the radiation and because of their very large surface area, quickly release the heat to the surrounding fluid stream. The fluid stream particle mixture is heated until the particles vaporize. The fluid stream is then allowed to expand in, for example, a gas turbine to produce mechanical energy. In an aspect of the present invention properly sized particles need not be vaporized prior to the entrance of the fluid stream into the turbine, as the particles will not damage the turbine blades. In yet another aspect of the invention, conventional fuel injectors are provided to inject fuel into the fluid stream to maintain the proper temperature and pressure of the fluid stream should the source of radiant energy be interrupted. In yet another aspect of the invention, an apparatus is provided which includes means for providing a hot fluid stream having hot particles disbursed therein which can radiate energy, means for providing a cooler fluid stream having cooler particles disbursed therein, which particles can absorb radiant energy and means for passing the hot fluid stream adjacent the cooler fluid stream to warm the cooler fluid and cooler particles by the radiation from the hot fluid and hot particles. 5 figs.

  20. Radiation receiver

    DOE Patents [OSTI]

    Hunt, Arlon J. (Oakland, CA)

    1983-01-01T23:59:59.000Z

    The apparatus for collecting radiant energy and converting same to alternate energy form includes a housing having an interior space and a radiation transparent window allowing, for example, solar radiation to be received in the interior space of the housing. Means are provided for passing a stream of fluid past said window and for injecting radiation absorbent particles in said fluid stream. The particles absorb the radiation and because of their very large surface area, quickly release the heat to the surrounding fluid stream. The fluid stream particle mixture is heated until the particles vaporize. The fluid stream is then allowed to expand in, for example, a gas turbine to produce mechanical energy. In an aspect of the present invention properly sized particles need not be vaporized prior to the entrance of the fluid stream into the turbine, as the particles will not damage the turbine blades. In yet another aspect of the invention, conventional fuel injectors are provided to inject fuel into the fluid stream to maintain the proper temperature and pressure of the fluid stream should the source of radiant energy be interrupted. In yet another aspect of the invention, an apparatus is provided which includes means for providing a hot fluid stream having hot particles disbursed therein which can radiate energy, means for providing a cooler fluid stream having cooler particles disbursed therein, which particles can absorb radiant energy and means for passing the hot fluid stream adjacent the cooler fluid stream to warm the cooler fluid and cooler particles by the radiation from the hot fluid and hot particles.

  1. Contingency contractor optimization. Phase 3, model description and formulation.

    SciTech Connect (OSTI)

    Gearhart, Jared Lee; Adair, Kristin Lynn; Jones, Katherine A.; Bandlow, Alisa; Durfee, Justin D.; Jones, Dean A.; Martin, Nathaniel; Detry, Richard Joseph; Nanco, Alan Stewart; Nozick, Linda Karen [Cornell University

    2013-10-01T23:59:59.000Z

    The goal of Phase 3 the OSD ATL Contingency Contractor Optimization (CCO) project is to create an engineering prototype of a tool for the contingency contractor element of total force planning during the Support for Strategic Analysis (SSA). An optimization model was developed to determine the optimal mix of military, Department of Defense (DoD) civilians, and contractors that accomplishes a set of user defined mission requirements at the lowest possible cost while honoring resource limitations and manpower use rules. An additional feature allows the model to understand the variability of the Total Force Mix when there is uncertainty in mission requirements.

  2. Contingency contractor optimization. phase 3, model description and formulation.

    SciTech Connect (OSTI)

    Gearhart, Jared Lee; Adair, Kristin Lynn; Jones, Katherine A.; Bandlow, Alisa; Detry, Richard Joseph; Durfee, Justin D.; Jones, Dean A.; Martin, Nathaniel; Nanco, Alan Stewart; Nozick, Linda Karen

    2013-06-01T23:59:59.000Z

    The goal of Phase 3 the OSD ATL Contingency Contractor Optimization (CCO) project is to create an engineering prototype of a tool for the contingency contractor element of total force planning during the Support for Strategic Analysis (SSA). An optimization model was developed to determine the optimal mix of military, Department of Defense (DoD) civilians, and contractors that accomplishes a set of user defined mission requirements at the lowest possible cost while honoring resource limitations and manpower use rules. An additional feature allows the model to understand the variability of the Total Force Mix when there is uncertainty in mission requirements.

  3. Technical assistance contractor Management Plan. Final [report

    SciTech Connect (OSTI)

    Not Available

    1993-09-01T23:59:59.000Z

    The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) and its major teaming partners [Roy F. Weston, Inc. (RFW), Sergent, Hauskins & Beckwith Agra, Inc. (SHB Agra), and Geraghty & Miller, Inc. (G&M)]. The first three companies have worked together effectively on the UMTRA Project for more than 10 years. With the initiation of the UMTRA Groundwater Project in April 1991, a need arose to increase the TAC`s groundwater technical breadth and depth, so G&M was brought in to augment the team`s capabilities. The TAC contract`s scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both surface and groundwater projects. The TAC team continues to support the DOE in completing surface remedial actions and initiating groundwater remediation work for start-up, characterization, design, construction oversight, and remedial operations. A key feature of the TAC`s management approach is the extensive set of communication systems implemented for the UMTRA Project. These systems assist all functional disciplines in performing UMTRA Project tasks associated with management, technical support, administrative support, and financial/project controls.

  4. UMTRA technical assistance contractor Quality Assurance Program Plan. Revision 4

    SciTech Connect (OSTI)

    Pehrson, P.

    1993-10-12T23:59:59.000Z

    This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAC Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements. The key to ensuring compliance with this directive is a two-step professional approach: utilize the quality system in all areas of activity, and generate a personal commitment from all personnel to provide quality service. The quality staff will be experienced, trained professionals capable of providing maximum flexibility to Project goal attainment. Such flexibility will enable the staff to be more cost effective and to further improve communication and coordination. To provide control details, this QAPP will be supplemented by approved standard operating procedures that provide requirements for performing the various TAC quality-related activities. These procedures shall describe applicable design input and document control activities and documentation.

  5. FY 2007/2008 Contractor Performance Plan, Volume 1

    SciTech Connect (OSTI)

    Project Integration

    2006-10-03T23:59:59.000Z

    This Contractor Performance Plan is a detailed execution plan covering fiscal years 2007 and 2008 that implements the Integration Project Baseline in a more aggressive cost and schedule approach.

  6. Worker Protection Management for DOE Federal and Contractor Employees

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-03-27T23:59:59.000Z

    Establishes the framework for an effective worker protection program that will reduce or prevent injuries, illnesses, and accidental losses by providing DOE Federal and contractor workers with a safe and healthful workplace. Cancels DOE O 440.1.

  7. 2005 River Corridor Cleanup Contractor Revegetation Monitoring Report

    SciTech Connect (OSTI)

    A. L. Johnson

    2005-09-12T23:59:59.000Z

    This report contains a compilation of the results of vegetation monitoring data that were collected in the spring and summer of 2005 for the Environmental Restoration Contractor's revegetation and mitigation areas on the Hanford Site.

  8. Office of River Protection Women-Owned Small Business Contractor Receives

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in ManyDepartment of OrderSUBCOMMITTEEEnergy0 9 - VisitPublicOne-Year

  9. Human Resources Staffing Plan for the Tank Farm Contractor

    SciTech Connect (OSTI)

    BOSLEY, J.W.

    2000-04-22T23:59:59.000Z

    The Human Resources Staffing Plan quantified the equivalent staffing needs required for the Tank Farm Contractor (TFC) and its subcontractors to execute the readiness to proceed baseline between FY 2000-2008. The TFC staffing needs were assessed along with the staffings needs of Fluor Hanford and the privatization contractor. The plan then addressed the staffing needs and recruitment strategies required to execute the baseline.

  10. Better Buildings Neighborhood Program Business Models Guide: HVAC Contractor Business Model Introduction

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program Business Models Guide: HVAC Contractor Business Model Introduction.

  11. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-04-15T23:59:59.000Z

    To clarify and modify policies and procedures for management of Department of Energy (DOE) facility contractor employees located in the Washington, D.C., area. A facility contractor employee is any employee of either a contractor responsible for managing a Department-owned facility, such as a National Laboratory, or a subcontractor of such a contractor. Facility contractor means any contractor performing under a Management and Operating (M&O), Management and Integration (M&I), or Environmental Restoration Management Contractor (ERMC) contract awarded by a DOE contracting officer. Canceled by DOE O 350.2.

  12. ALARA training at DOE contractor facilities

    SciTech Connect (OSTI)

    Neeser, J.L.

    1992-05-22T23:59:59.000Z

    ALARA training is an important element of a sound ALARA program. ALARA training at a nuclear facility needs to be conducted for all occupational workers, for radiation workers, for radiation protection technicians, and for all other employees who have ALARA responsibilities. Each of these groups needs to receive ALARA training specific to their responsibilities. This report describes how to develop this training. It also outlines what should be included in an acceptable ALARA training program.

  13. High-Temperature Falling-Particle Receiver

    Broader source: Energy.gov (indexed) [DOE]

    | April 15, 2013 | Ho * This project employs modeling, design, testing, and optimization to further develop and improve key areas of falling particle receiver technology...

  14. High-Temperature Falling-Particle Receiver

    Broader source: Energy.gov (indexed) [DOE]

    | June 15, 2013 | Ho * This project employs modeling, design, testing, and optimization to further develop and improve key areas of falling particle receiver technology...

  15. Energy Renovations: Volume 17: Insulation - A Guide for Contractors to Share with Homeowners

    SciTech Connect (OSTI)

    Baechler, Michael C.; Adams, Karen; Hefty, Marye G.; Gilbride, Theresa L.; Love, Pat M.

    2012-05-15T23:59:59.000Z

    This report was prepared by PNNL for DOE's Building America program and is intended as a guide that energy performance contractors can share with homeowners to describe various insulation options for improving the energy performance and comfort of existing homes. The report provides descriptions of many common insulation types, including their advantages and disadvantages, R-values, characteristics, and typical uses. The report also describes potentially hazardous products such as asbestos and formaldehyde and safety issues when conducting energy-efficient upgrades including radon. The guide is available for download at the DOE Building America website, www.buildingamerica.gov.

  16. Team Hanford: Records management in a multi-contractor environment

    SciTech Connect (OSTI)

    Anderson, E.N. [Pacific Northwest Lab., Richland, WA (United States); Anderson, T.V. [Kaiser Engineers Hanford, Richland, WA (United States); Munch, J.W. [Hanford Environmental Health Foundation, Richland, WA (United States); Potter, C.N. [Westinghouse Hanford Co., Richland, WA (United States)

    1993-08-01T23:59:59.000Z

    Expanding technology, increased emphasis on cost containment, and an ever growing list of requirements and regulations present challenges to records managers. The multi-contractor environment of the Department of Energy`s (DOE) Hanford Site further complicates the picture. In an effort to strengthen the site`s records management program, representatives of DOE`s Richland Operations Office and its four Hanford contractors joined forces. This synergistic Team Hanford approach continues to spawn success and is looked on as a model for similar DOE sites.

  17. Making Use of Pinch: A Contractors Experience

    E-Print Network [OSTI]

    Morgan, S. W.; Parker, S. J.

    in the current economic climate. One tool, mainly developed during the lean years, that has been used extensively for this task the Pinch Technology. Kellogg has found this technology invaluable and the correct use of it has led to significant improvements...

  18. SANDIA CONTRACTORS REPORT FATIGUE OF COMPOSITE MATERIALS AND

    E-Print Network [OSTI]

    SANDIA CONTRACTORS REPORT FATIGUE OF COMPOSITE MATERIALS AND SUBSTRUCTURES FOR WIND TURBINE BLADES Abstract ThisreportpresentsthemajorfindingsoftheMontanaStateUniversityCompositeMaterialsFatigue Program from 1997 to 2001, and is intended to be used in conjunction with the DOE/MSU Composite Materials

  19. EM Sees Growth Across Complex in Partnering Agreements with Contractors

    Broader source: Energy.gov [DOE]

    AIKEN, S.C. – DOE Savannah River Operations Office Manager Dave Moody views the partnering relationship between his office and liquid waste contractor Savannah River Remediation (SRR) as an opportunity to view cleanup work from each other’s point of view.

  20. Worker Protection Management for DOE Federal and Contractor Employees

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30T23:59:59.000Z

    Establishes the framework for an effective worker protection program that will reduce or prevent accidental losses, injuries, and illnesses by providing DOE Federal and contractor workers with a safe and healthful workplace. Chg 1, 10-26-95; Chg 2, 10-26-96.

  1. SF 2001-WLD;CONTRACTOR WELDING, CUTTING AND BRAZING

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    01-WLD (11-2012) Supersedes (4-2010) Issue CONTRACTOR WELDING, CUTTING, BRAZING P ART 1: CO NT R ACT O R' S E X PO S UR E AS S E S SM ENT Identify what welding, cutting andor...

  2. Proceedings of the fuels technology contractors review meeting

    SciTech Connect (OSTI)

    Malone, R.D. [ed.

    1993-11-01T23:59:59.000Z

    The Fuels Technology Contractors Review Meeting was held November 16-18, 1993, at the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. This meeting was sponsored and hosted by METC, the Office of Fossil Energy, U.S. Department of Energy (DOE). METC periodically provides an opportunity to bring together all of the R&D participants in a DOE-sponsored contractors review meeting to present key results of their research and to provide technology transfer to the active research community and to the interested public. This meeting was previously called the Natural Gas Technology Contractors Review Meeting. This year it was expanded to include DOE-sponsored research on oil shale and tar sands and so was retitled the Fuels Technology Contractors Review Meeting. Current research activities include efforts in both natural gas and liquid fuels. The natural gas portion of the meeting included discussions of results summarizing work being conducted in fracture systems, both natural and induced; drilling, completion, and stimulation research; resource characterization; delivery and storage; gas to liquids research; and environmental issues. The meeting also included project and technology summaries on research in oil shale, tar sands, and mild coal gasification, and summaries of work in natural-gas fuel cells and natural-gas turbines. The format included oral and poster session presentations. Individual papers have been processed separately for inclusion in the Energy Science and Technology database.

  3. DOE Human Genome Program contractor-grantee workshop

    SciTech Connect (OSTI)

    NONE

    1996-01-01T23:59:59.000Z

    This volume contains the proceedings for the DOE Human Genome Program`s Contractor-Grantee Workshop V held in Sante Fe, New Mexico January 28, February 1, 1996. Presentations were divided into sessions entitled Sequencing; Mapping; Informatics; Ethical, Legal, and Social Issues; and Infrastructure. Reports of individual projects described herein are separately indexed and abstracted for the database.

  4. Criteria and Procedures for DOE Contractor Employee Protection Program

    Broader source: Energy.gov [DOE]

    This regulation provides procedures for processing complaints by employees of DOE contractors alleging retaliation by their employers for disclosure of information concerning danger to public or worker health or safety, substantial violations of law, or gross mismanagement; for participation in Congressional proceedings; or for refusal to participate in dangerous activities.

  5. CONTRACTOR HAZARDOUS MATERIALS INVENTORY REPORT Project Name: ORNL Y-12 Project Begin Date: Estimated Project End Date

    E-Print Network [OSTI]

    Pennycook, Steve

    CONTRACTOR HAZARDOUS MATERIALS INVENTORY REPORT Project Name: ORNL Y-12 Project Begin Date: Phone Numbers: Project Manager: Field Representative: SHEST Representative: List of Hazardous Materials: Estimated Project End Date: Contractor/Service Subcontractor Name: Contractor/Service Subcontractor Address

  6. GAO-04-148R Department of Energy: Reimbursement of Contractor...

    Energy Savers [EERE]

    GAO-04-148R Department of Energy: Reimbursement of Contractor Litigation Costs GAO-04-148R Department of Energy: Reimbursement of Contractor Litigation Costs GAO-04-148R Department...

  7. Policy Flash 2014-13 AL 2014-03: Allowability of Contractor Litigation...

    Office of Environmental Management (EM)

    Flash 2014-13 AL 2014-03: Allowability of Contractor Litigation Defense and Settlement Costs Policy Flash 2014-13 AL 2014-03: Allowability of Contractor Litigation Defense and...

  8. Kazakhstan receiving acreage applications

    SciTech Connect (OSTI)

    Not Available

    1995-01-09T23:59:59.000Z

    Kazakhstan is receiving applications for exploration and development rights to large tracts in the central and eastern parts of the republic. The program is part of a country-wide effort to attract more foreign investigators to help underwrite massive industrial privatization aimed at revitalizing Kazakhstan's economy. A delegation of Kazakh officials visited Houston the last week in November to publicize petroleum opportunities in the republic and appeared Dec. 1--2 at a conference to present an overview of Kazakhstan's petroleum prospectivity. Officials also reviewed recently approved legal, financial, and environmental legislation intended to improve the attractiveness of investing in Kazakhstan's energy sector. This paper discusses the status of development, gives a geologic overview, and highlights the geology of the South Torgay and Teniz basins.

  9. Connecticut Weatherization Project Improves Lives, Receives National

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuildingCoalComplex Flow WorkshopInformationData

  10. Connecticut Weatherization Project Improves Lives, Receives National

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave the WhiteNational|ofSeptemberConfrontingFY 2011Recognition |

  11. Municipal solid waste management: A bibliography of US Department of Energy contractor reports through 1993

    SciTech Connect (OSTI)

    Shepherd, P.

    1994-07-01T23:59:59.000Z

    US Department of Energy contractors continue to conduct research targeting the productive and responsible use of the more than 536,000 tons of municipal solid waste (MSW) that is generated each day in the United States. It is becoming more and more prudent to improve current methods of MSW management and to continue to search for additional cost-effective, energy-efficient means to manage our MSW resource. This bibliography is an updated version of Municipal Waste to Energy: An Annotated Bibliography of US Department of Energy Contractor Reports, by Caroline Brooks, published in 1987. Like its predecessor, this bibliography provides information about technical reports on energy from municipal waste that were prepared under grants or contracts from the US Department of Energy. The reports listed focus on energy from municipal waste technologies and energy conservation in wastewater treatment. The bibliography contains three indexes -- an author index, a subject index, and a title index. The reports are listed alphabetically in the subject areas and may appear under more than one subject. All of the reports cited in the original MSW bibliography are also included in this update. The number of copies of each report originally published varied according to anticipated public demand. However, all reports are available in either microfiche or hard copy form and may be ordered from the National Technical Information Service (NTIS), US Department of Commerce, Springfield, VA 22161. Explicit information on ordering reports is included in Appendix A.

  12. Solar heat receiver

    DOE Patents [OSTI]

    Hunt, Arlon J. (Oakland, CA); Hansen, Leif J. (Berkeley, CA); Evans, David B. (Orinda, CA)

    1985-01-01T23:59:59.000Z

    A receiver for converting solar energy to heat a gas to temperatures from 700.degree.-900.degree. C. The receiver is formed to minimize impingement of radiation on the walls and to provide maximum heating at and near the entry of the gas exit. Also, the receiver is formed to provide controlled movement of the gas to be heated to minimize wall temperatures. The receiver is designed for use with gas containing fine heat absorbing particles, such as carbon particles.

  13. Solar heat receiver

    DOE Patents [OSTI]

    Hunt, A.J.; Hansen, L.J.; Evans, D.B.

    1982-09-29T23:59:59.000Z

    A receiver is described for converting solar energy to heat a gas to temperatures from 700 to 900/sup 0/C. The receiver is formed to minimize impingement of radiation on the walls and to provide maximum heating at and near the entry of the gas exit. Also, the receiver is formed to provide controlled movement of the gas to be heated to minimize wall temperatures. The receiver is designed for use with gas containing fine heat absorbing particles, such as carbon particles.

  14. Central solar-energy receiver

    DOE Patents [OSTI]

    Not Available

    1981-10-27T23:59:59.000Z

    An improved tower-mounted central solar energy receiver for heating air drawn through the receiver by an induced draft fan is described. A number of vertically oriented, energy absorbing, fin-shaped slats are radially arranged in a number of concentric cylindrical arrays on top of the tower coaxially surrounding a pipe having air holes through which the fan draws air which is heated by the slats which receive the solar radiation from a heliostat field. A number of vertically oriented and wedge-shaped columns are radially arranged in a number of concentric cylindrical clusters surrounding the slat arrays. The columns have two mirror-reflecting sides to reflect radiation into the slat arrays and one energy absorbing side to reduce reradiation and reflection from the slat arrays.

  15. Municipal solid waste management: A bibliography of US Department of Energy contractor report through 1994

    SciTech Connect (OSTI)

    None

    1995-09-01T23:59:59.000Z

    U.S. Department of Energy contractors continue to conduct research targeting the productive and responsible use of the more than 516,000 metric tons (567,000 tons) of municipal solid waste (MSW) that is generated each day in the United States. It is becoming more and more prudent to improve current methods of MSW management and to continue to search for additional cost-effective, energy-efficient means to manage our MSW resource. This bibliography provides information about technical reports on energy from municipal waste that were prepared under grants or contracts from the US DOE. The reports listed focus on energy from municipal waste technologies and energy conservation in wastewater treatment.

  16. Digital-data receiver synchronization

    DOE Patents [OSTI]

    Smith, Stephen F.; Turner, Gary W.

    2005-08-02T23:59:59.000Z

    Digital-data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock can be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

  17. UMTRA technical assistance contractor quality assurance program plan

    SciTech Connect (OSTI)

    Not Available

    1994-10-01T23:59:59.000Z

    This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAc Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements.

  18. Technical assistance contractor management plan: Surface and ground water

    SciTech Connect (OSTI)

    Not Available

    1994-09-01T23:59:59.000Z

    This report presents the general management structure of the Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. This team is a partnership of four major private subcontractors, which teamed together, are striving to be the leader in environmental restoration of uranium mining and milling operations. It will provide a pool of experts in various aspects of the technologies necessary to accomplish this goal, available to DOE to deal with mission concerns. The report expands on goals from TAC`s mission statement, which include management concerns, environment, safety, and health, quality, technical support, communications, and personnel.

  19. Contractor Purchasing Balanced Scorecard for FY 2012 | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy ContractContractorPurchasing

  20. EM Contractors for Capital Asset Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised FindingDepartmentDepartmentStatementEnergy EMEMof EnergyContractors

  1. Award Fee Determination Scorecard Contractor: Mission Support Alliance, LLC (MSA)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugust AugustInstruments on the Site Contractor:

  2. Award Fee Determination Scorecard Contractor: Bechtel National, Inc. (BNI)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugust AugustInstruments on the Site Contractor:

  3. Contractor Fee Payments - Savannah River Site Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave theJuly 30, 2013 Sanyo: NoticeContinuingFinancingContractor Fee

  4. Contractor Performance Assessment Reporting System (CPARS) | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. DepartmentEnergy This partAs theFebruary09Contractor Past

  5. Trends in Contractor Conversion Rates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic|IndustrialCenter GetsEnergySpecification: Revision 1Contractor

  6. CONTRACTOR AND ADDRESS COEPPRACT FOR: TERM: COMMT.SSION OBLIGATION

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling Corp -KWatertowni5W 95.5 L'COLUMBIA+.CONTRACTOR

  7. Data-fusion receiver

    DOE Patents [OSTI]

    Gabelmann, Jeffrey M.; Kattner, J. Stephen; Houston, Robert A.

    2006-12-19T23:59:59.000Z

    This invention is an ultra-low frequency electromagnetic telemetry receiver which fuses multiple input receive sources to synthesize a decodable message packet from a noise corrupted telemetry message string. Each block of telemetry data to be sent to the surface receiver from a borehole tool is digitally encoded into a data packet prior to transmission. The data packet is modulated onto the ULF EM carrier wave and transmitted from the borehole to the surface and then are simultaneously detected by multiple receive sensors disbursed within the rig environment. The receive sensors include, but are not limited to, electric field and magnetic field sensors. The spacing of the surface receive elements is such that noise generators are unequally coupled to each receive element due to proximity and/or noise generator type (i.e. electric or magnetic field generators). The receiver utilizes a suite of decision metrics to reconstruct the original, non noise-corrupted data packet from the observation matrix via the estimation of individual data frames. The receiver will continue this estimation process until: 1) the message validates, or 2) a preset "confidence threshold" is reached whereby frames within the observation matrix are no longer "trusted".

  8. Memo from Deputy Secretary Poneman to DOE Contractor or Financial Assistance Recipient

    Broader source: Energy.gov [DOE]

    The memo from the Deputy Secretary Poneman provides the DOE Contractor or Financial Assistance recipients with timely and clear information about the budget cuts.

  9. Policy Flash 2013-70 Acqusition Guides 42.15 Contractor Performance...

    Office of Environmental Management (EM)

    into Federal Awardee Performance and Integrity Infromation Systems (FAPIIS) Policy Flash 2013-70 Acqusition Guides 42.15 Contractor Performance Infromation and 42.16...

  10. Rev.1 U.S. D EPARTMENT OF ENERGY Contractor Records Custodian...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Records Custodian Authorization SECTION I. Authorization Pursuant to DOE Order 243.1B, Records Management Program, Attachment 1, Contractor Requirements Document, (Name) ,...

  11. General contractor’s project of projects – a meta-project: understanding the new paradigm and its implications through the lens of entropy 

    E-Print Network [OSTI]

    Fernandez-Solis, Jose; Rybkowski, Zofia K.; Xiao, Chao; Lü , Xiaoshu; Chae, Lee Seok

    2015-02-08T23:59:59.000Z

    level. Stakeholders, including the owner (along with due diligence, and O&M teams), architect (and the design team), general contractor (and its subcontractor team) create, transmit, process, manage and use information. The boundary between information...

  12. SF 2001-WLD (11-2012) Supersedes (4-2010) Issue CONTRACTOR WELDING, CUTTING, BRAZING

    E-Print Network [OSTI]

    SF 2001-WLD (11-2012) Supersedes (4-2010) Issue CONTRACTOR WELDING, CUTTING, BRAZING PART 1: CONTRACTOR'S EXPOSURE ASSESSMENT Identify what welding, cutting and/or brazing you are doing: (Check box or fill-in type below) Welding Thermal Cutting Brazing (No cadmium filler BAg-1 or BAg- 2; Silver

  13. Better Buildings Neighborhood Program Business Models Guide: Home Performance Contractor Business Model

    Broader source: Energy.gov [DOE]

    The home performance contractor model walks through the “one-stop-shop” model for home energy upgrades. It illustrates both the opportunities and barriers for starting as a home performance contractor company from the beginning, rather than expanding from an existing model, such as a remodeler.

  14. Better Buildings Neighborhood Program Business Models Guide: Home Performance Contractor Business Model Conclusion

    Broader source: Energy.gov [DOE]

    The summary details important observations on home performance contractors and those observations’ impact on potential expansion into the residential energy efficiency market. Understanding these impacts can help home performance contractors, program administrators, and other actors create and/or sustain a business that promotes energy efficiency.

  15. The US Department of Energy`s prime contractor fees on subcontractor costs

    SciTech Connect (OSTI)

    NONE

    1998-09-11T23:59:59.000Z

    In Fiscal Year 1996, the Department`s prime contractors awarded $5.3 billion in subcontracts. The purpose of this audit was to determine if the Department adjusted the fee bases of prime contractors to reflect the actual effort necessary to manage the technical and administrative activities of their subcontractors.

  16. DOE's Worker-Focused Safety Program Honors Contractors Across...

    Energy Savers [EERE]

    of Excellence for Safety Performance Subscribe to EM News Email Updates Gov Delivery logo To receive the latest news and updates about the Office of Environmental Management,...

  17. NNSA project receives DOE Secretary's Award for Project Management...

    National Nuclear Security Administration (NNSA)

    project receives DOE Secretary's Award for Project Management Improvement | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the...

  18. Letter to Mr. Podonsky from DOE and Contractor Attorneys' Association concerning 10 CFR 851 implementation issues, May 21, 2007

    Broader source: Energy.gov [DOE]

    Memorandum to Mr. Podonsky from DOE and Contractor Attorneys' Association concerning 10 CFR 851 implementation issues, May 21, 2007

  19. Global Positioning System receiver evaluation results

    SciTech Connect (OSTI)

    Byrne, R.H.

    1993-09-01T23:59:59.000Z

    A Sandia project currently uses an outdated Magnavox 6400 Global Positioning System (GPS) receiver as the core of its navigation system. The goal of this study was to analyze the performance of the current GPS receiver compared to newer, less expensive models and to make recommendations on how to improve the performance of the overall navigation system. This paper discusses the test methodology used to experimentally analyze the performance of different GPS receivers, the test results, and recommendations on how an upgrade should proceed. Appendices contain detailed information regarding the raw data, test hardware, and test software.

  20. Health and productivity benefits of improved indoor air quality

    SciTech Connect (OSTI)

    Dorgan, C.B. [Dorgan Associates, Inc., Madison, WI (United States); Dorgan, C.E.; Kanarek, M.S. [Univ. of Wisconsin, Madison, WI (United States); Willman, A.J. [Quantum Technology, Inc., Springfield, VA (United States)

    1998-10-01T23:59:59.000Z

    This paper is a summary of two studies completed for a national contractor`s association on the health costs and productivity benefits of improved IAQ. The original study documented the general health costs and productivity benefits of improved IAQ. The second study expanded the scope to include medical cost reductions for specific illnesses from improved IAQ. General information on the objectives, assumptions, definitions, and results of the studies are presented, followed by detailed information on research methodology, building inventory and wellness categories, health and medical effects of poor IAQ, health cost benefits, productivity benefits, recommended improvements, and conclusions and future improvements.

  1. UMTRA project technical assistance contractor quality assurance implementation plan

    SciTech Connect (OSTI)

    Not Available

    1994-03-01T23:59:59.000Z

    The Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance contractor (TAC) Quality Assurance Implementation Plan (QAIP) outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QAIP is subordinate to the latest issue of the UMTRA Project TAC Quality Assurance Program Plan (QAPP) (DOE, 1993a), which was developed using US Department of Energy (DOE) Order 5700.6C quality assurance (QA) criteria. The QAIP addresses technical aspects of the TAC UMTRA Project surface and ground water programs. All QA issues in the QAIP shall comply with requirements contained in the TAC QAPP (DOE, 1933a). Because industry standards for data acquisition and data control are not addressed in DOE Order 5700.6C, the QAIP has been formatted to the 14 US Environmental Protection Agency (EPA) Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) QA requirements. DOE Order 5700.6C criteria that are not contained in the CERCLA requirements are added to the QAIP as additional requirements in Sections 15.0 through 18.0. Project documents that contain CERCLA requirements and 5700.6 criteria shall be referenced in this document to avoid duplication. Referenced documents are not included in this QAIP but are available through the UMTRA Project Document Control Center.

  2. Multichannel homodyne receiver

    DOE Patents [OSTI]

    Landt, J.A.

    1981-01-19T23:59:59.000Z

    A homodyne radar transmitter/receiver device which produces a single combined output which contains modulated backscatter information for all phase conditions of both modulated and unmodulated backscatter signals is described. The device utilizes taps along coaxial transmission lines, strip transmission line, and waveguides which are spaced by 1/8 wavelength or 1/6 wavelength, etc. This greatly reduces costs by eliminating separate transmission and reception antennas and an expensive arrangement of power splitters and mixers utilized in the prior art.

  3. Multichannel homodyne receiver

    DOE Patents [OSTI]

    Landt, Jeremy A. (Los Alamos, NM)

    1982-01-01T23:59:59.000Z

    A homodyne radar transmitter/receiver device which produces a single combined output which contains modulated backscatter information for all phase conditions of both modulated and unmodulated backscatter signals. The device utilizes taps along coaxial transmission lines, strip transmission line, and waveguides which are spaced by 1/8 wavelength or 1/6 wavelength, etc. This greatly reduces costs by eliminating separate transmission and reception antennas and an expensive arrangement of power splitters and mixers utilized in the prior art.

  4. Contractor Work Planning and Control Lessons Learned from DOE and International Projects

    Broader source: Energy.gov [DOE]

    Slide Presentation by Bob McQuinn; URS Global Management and Operations Services; Frank McCoy and Rick Runnels; URS - Professional Solutions. Contractor Work Planning and Control-URS Lessons Learned.

  5. Type A Accident Investigation Report on the June 25, 1997, Contractor...

    Broader source: Energy.gov (indexed) [DOE]

    contractor accident which occurred on BPAs Satsop-Aberdeen 2 and 3 230-kV transmission lines right-of-way. The responsibilities of this board have been completed with...

  6. Directory of DOE and contractor personnel involved in non-government standards activities

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    This document contains a listing of DOE employees and DOE contractors who have submitted form DOE F 1300.2, Record of Non-Government Standards Activity. Additional names were added from rosters supplied by non-Government standards bodies.

  7. Practical matters for defense contractors converting DoD technology to commercial markets

    E-Print Network [OSTI]

    Ting, Carina Maria

    2012-01-01T23:59:59.000Z

    This thesis asks if and how the defense contractor can profitably transfer the technology and institutional learning obtained from DoD funded R&D to commercial markets. There are numerous examples of very successful defense ...

  8. Bilateral DOE Laboratory Utilization Agreement LOS ALAMOS NATIONAL SECURITY, LLC (CONTRACTOR)

    E-Print Network [OSTI]

    Bilateral DOE Laboratory Utilization Agreement LOS ALAMOS NATIONAL. S. Department of Energy, National Nuclear Security Administration. An additional funding agreement (e.g., an Integrated Contractor Order) for funding transfer

  9. Preserving a Heritage: Creating a More Beneficial Historic Structure Report, for Contractors and a University

    E-Print Network [OSTI]

    Ellis, Evan D

    2013-12-09T23:59:59.000Z

    Historic structure reports (HSR) are multidisciplinary and offer much needed understanding to all that use them. These reports are created to help architects, contractors and owners understand the historic importance of features and the building...

  10. Congratulations to for receiving a 2011

    E-Print Network [OSTI]

    Nehorai, Arye

    Congratulations to Lan Yang for receiving a 2011 Presidential Early Career Award for Scientists, mo permit no. 2501 About the School of Engineering & Applied Science » Improving quality of life-of-the-art engineering facilities >> engineering.wustl.edu Lan Yang, PhD recipient of the 2011 Presidential Early Career

  11. Office of Inspector General audit report on Hanford Site contractors` use of site services

    SciTech Connect (OSTI)

    NONE

    1999-03-01T23:59:59.000Z

    The mission of the Department of Energy (DOE), Richland Operations Office (Richland) is to safely manage legacy wastes, develop and deploy science and technology, and provide stewardship of the Hanford Site (Site). To accomplish its mission, Richland employs five prime contractors: Fluor Daniel Hanford, Inc. (Fluor Daniel); Bechtel Hanford, Inc. (Bechtel); Battelle-Pacific Northwest National Laboratory (Battelle); Hanford Environmental Health Foundation; and BNFL, Inc. Some of these contractors, in turn, have multiple subcontractors. To operate the Site, contractors need to use numerous services, such as telecommunications, copying, and photography. Richland directed certain contractors to provide these and other services, called site services, for the benefit of all contractors and assigned responsibility for optimal utilization of these services to its Site Infrastructure Division (SID). In the past, the Office of Inspector General (OIG) audited several site services, including groundwater monitoring, protective forces, personnel security clearances, railroad services, and fleet management. These audits disclosed that the services were not always efficiently and effectively coordinated. Therefore, the objective of this audit was to examine other site services, principally those provided at least in part by Fluor Daniel, to determine if contractors were acquiring services already available.

  12. Ultra-wideband receiver

    DOE Patents [OSTI]

    McEwan, T.E.

    1994-09-06T23:59:59.000Z

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, [+-] UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals. 16 figs.

  13. Ultra-wideband receiver

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1996-01-01T23:59:59.000Z

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, .+-.UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals.

  14. Ultra-wideband receiver

    DOE Patents [OSTI]

    McEwan, T.E.

    1996-06-04T23:59:59.000Z

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, {+-}UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals. 21 figs.

  15. Ultra-wideband receiver

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1994-01-01T23:59:59.000Z

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, .+-.UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals.

  16. Owner/contractor work structure process with integrated alignment framework

    E-Print Network [OSTI]

    Sullivan, George Ray

    1996-01-01T23:59:59.000Z

    capital program expenditures , and to improve operational efficiency. For their capital projects, owners want the highest quality project, as fast as possible, at the lowest possible cost, with no harm to workers or the environment. To accomplish this...

  17. Occupational dose reduction at Department of Energy contractor facilities: Study of ALARA programs. Status 1990

    SciTech Connect (OSTI)

    Dionne, B.J.; Meinhold, C.B.; Khan, T.A.; Baum, J.W.

    1992-08-01T23:59:59.000Z

    This report provides the US Department of Energy (DOE) and its contractors with information that will be useful for reducing occupational radiation doses at DOE`s nuclear facilities. In 1989 and 1990, health physicists from the Brookhaven National Laboratory`s (BNL) ALARA Center visited twelve DOE contractor facilities with annual collective dose equivalents greater than 100 person-rem (100 person-cSv). The health physicists interviewed radiological safety staff, engineers, and training personnel who were responsible for dose control. The status of ALARA practices at the major contractor facilities was compared with the requirements and recommendation in DOE Order 5480.11 ``Radiation Protection for Occupational Workers`` and PNL-6577 ``Health Physics Manual of Good Practices for Reducing Radiation Exposure to Levels that are as Low as Reasonably Achievable.`` The information and data collected are described and examples of successful practices are presented. The findings on the status of the DOE Contractor ALARA Programs are summarized and evaluated. In addition, the supplement to this report contains examples of good-practice documents associated with implementing the major elements of a formally documented ALARA program for a major DOE contractor facility.

  18. Management of government personal property in the hands of contractors. Handbook for contracting officers and staff

    SciTech Connect (OSTI)

    Not Available

    1982-04-01T23:59:59.000Z

    This manual is divided into three parts. Part One applies to the management of Government personal property within the Department of Energy in general terms. Part Two describes the specifics of the application of personal property management techniques to On-Site Contractors. Part three applies to Off-Site Contractors. Part One introduces the field of property management. It discusses: the legal basis and requirements established by Federal Statutes and the parallel authorities and responsibilities; the related evolution of the Department of Energy; the regulation system within the Federal Government and its implementation by the Department for personal property management. The life cycle of equipment is presented and how control over personal property is maintained through an accountability system. Classifications of property and contract clauses are discussed. The relationships of contracting officers and property administrators with contractors are presented in each of the discussions as appropriate. Part One consists of only one chapter and is applicable to the management of property utilized by all types of contractors. It provides the foundation to explore in some detail the actions and interactions that occur between the Department's procurement and property personnel and those of the contractor. This exploration in depth is made in Parts Two and Three.

  19. High-temperature ceramic receivers

    SciTech Connect (OSTI)

    Jarvinen, P. O.

    1980-01-01T23:59:59.000Z

    An advanced ceramic dome cavity receiver is discussed which heats pressurized gas to temperatures above 1800/sup 0/F (1000/sup 0/C) for use in solar Brayton power systems of the dispersed receiver/dish or central receiver type. Optical, heat transfer, structural, and ceramic material design aspects of the receiver are reported and the development and experimental demonstration of a high-temperature seal between the pressurized gas and the high-temperature silicon carbide dome material is described.

  20. General contractor’s project of projects – a meta-project: understanding the new paradigm and its implications through the lens of entropy

    E-Print Network [OSTI]

    Fernandez-Solis, Jose; Rybkowski, Zofia K.; Xiao, Chao; Lü, Xiaoshu; Chae, Lee Seok

    2015-02-08T23:59:59.000Z

    . That is, one plus one is more than two, or in construction, the work, labor, material effort at the end has a value that is greater than the work, once completed and used for its intended purpose. This is the project’s economic utility (Buchen & Kelly... Street, London W1T 3JH, UK Click for updates Architectural Engineering and Design Management Publication details, including instructions for authors and subscription information: http://www.tandfonline.com/loi/taem20 General contractor's project...

  1. UK contractors' experience of management of tritium during decommissioning projects

    SciTech Connect (OSTI)

    Green, Tommy; Stevens, Keith; Heaney, John [NUKEM Ltd., Kelburn Court, Daten Park, Birchwood, Warrington, WA3 6TW (United Kingdom); Murray, Alan [Tetronics Limited, 1 Ram Court. Wicklesham Farm, Faringdon. Oxfordshire SN7 7PN (United Kingdom); Warwick, Phil; Croudace, Ian [GAU-Radioalytical, National Oceanography Centre (United Kingdom)

    2007-07-01T23:59:59.000Z

    Available in abstract form only. Full text of publication follows: This paper provides an account of the tritium management experience of a UK decommissioning and remediation contracting organisation (NUKEM Limited), supported by a specialist radio-analysis organisation (GAU-Radioanalytical). This experience was gained during the execution of projects which involved the characterisation and remediation of facilities which had previously been used for tritium work and were contaminated with tritium. The emphasis of the paper is on the characterisation (sampling and analysis) of tritium. An account is given of the development of a methodology to improve the accuracy of tritium characterisation. The improved methodology evolved from recognition of the need to minimise tritium losses during sampling, storage, transport and preparation for analysis. These improvements were achieved in a variety of ways, including use of cold and dry sampling techniques in preference to hot or wet ones and freezing relevant samples during storage and transport. The major benefit was an improvement in the accuracy and reliability of the analyses results, essential for proper categorisation, sentencing and future management of tritiated waste. (authors)

  2. Notice of Intent to Revise Department of Energy Order 350.1, Contractor Human Resources Management Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-10-19T23:59:59.000Z

    DOE O 350.1 establishes responsibilities, requirements, and cost allow-ability criteria for the management an oversight of contractor human resource management programs, is being revised to remove contractor requirements from Chapter IV, Compensation, Chapter V, Benefits, and Chapter VI Pensions

  3. Contractor Workplace Substance Abuse Program at DOE Sites (10 CFR 707)

    Broader source: Energy.gov [DOE]

    This rule establishes policies, criteria, and procedures for developing and implementing programs to maintain a workplace free from the use of illegal drugs. It applies to DOE contractors performing work at sites owned or controlled by DOE and to individuals with unescorted access to the control areas of certain DOE reactors.

  4. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-07-12T23:59:59.000Z

    To clarify and modify policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), facility contractor employees located in the Washington, D.C., area. Cancels DOE N 350.5. Certified 12-28-06. Canceled by DOE O 350.2A.

  5. DE-AC02-76SF00515 Contractor Performance Evaluation and

    E-Print Network [OSTI]

    Wechsler, Risa H.

    #12;#12;DE-AC02-76SF00515 Appendix B M544 FY 2008 Contractor Performance Evaluation and Measurement Plan for Management and Operations ofthe Stanford Linear Accelerator Center 10-03-07 09:58 RCVD J

  6. OLMS Fact Sheet Obligation of Federal Contractors to Notify Employees of

    E-Print Network [OSTI]

    Oklahoma, University of

    OLMS Fact Sheet Obligation of Federal Contractors to Notify Employees of Their Rights Under Federal) the Department of Labor's Office of Labor-Management Standards (OLMS) at (202) 693-0123 or www.olms.dol.gov; or (3) field offices of the Department of Labor's OLMS or Office of Federal Contract Compliance Pro

  7. HANFORD SITE WELDING PROGRAM SUCCESSFULLY PROVIDING A SINGLE SITE FUNCTION FOR USE BY MULTIPLE CONTRACTORS

    SciTech Connect (OSTI)

    CANNELL GR

    2009-11-19T23:59:59.000Z

    The Department of Energy, Richland Operations (DOE-RL) recently restructured its Hanford work scope, awarding two new contracts over the past several months for a total of three contracts to manage the sites cleanup efforts. DOE-RL met with key contractor personnel prior to and during contract transition to ensure site welding activities had appropriate oversight and maintained code compliance. The transition also provided an opportunity to establish a single site-wide function that would provide welding and materials engineering services to the Hanford site contractors: CH2M HILL Plateau Remediation Company (CHPRC); Mission Support Alliance (MSA); Washington River Protection Solutions (WRPS); and Washington Closure Hanford (WCH). Over the years, multiple and separate welding programs (amongst the several contractors) existed at the Hanford site leading to inefficiencies resulting from duplication of administrative efforts, maintenance of welding procedures, welder performance certifications, etc. The new, single program eliminates these inefficiencies. The new program, co-managed by two of the sites' new contractors, the CHPRC ('owner' of the program and responsible for construction welding services) and the MSA (provides maintenance welding services), provides more than just the traditional construction and maintenance welding services. Also provided, are welding engineering, specialty welding development/qualification for the closure of radioactive materials containers and materials evaluation/failure analysis. The following describes the new Hanford site welding program.

  8. INFORMATION TECHNOLOGY INNOVATION: A VIEW OF LARGE CONTRACTORS1 T. Michael Toole, Member, ASCE

    E-Print Network [OSTI]

    Toole, T. Michael

    page 1 INFORMATION TECHNOLOGY INNOVATION: A VIEW OF LARGE CONTRACTORS1 T. Michael Toole, Member of technological innovations is whether diffusion is driven more by technology-push than by demand-pull mechanisms is to broaden the perspective on information technology (IT) innovation presented here at the congress

  9. Manpower trends and training requirements for radiation protection personnel in the DOE contractor system

    SciTech Connect (OSTI)

    Trice, J.

    1984-02-01T23:59:59.000Z

    This document reports results of a survey undertaken jointly by the Office of Nuclear Safety and the Office of Industrial Relations, US Department of Energy, with assistance from Oak Ridge Associated Universities. The purpose of the survey was twofold: (1) to determine the current status and recent trends in technician-level radiation safety manpower among DOE contractors; and (2) to document the scope of radiation safety training activities for radiation protection technicians and other workers within the DOE contractor system. Data reported here were obtained both by use of a formal written questionnaire completed by staff at 34 government-owned, contractor-operated (GOCO) nuclear facilities and through supplemental documentation obtained from contractors of training procedures and requirements. The first half of this report describes trends in radiation protection manpower and reports workforce characteristics of health physics technicians. The second half of the report describes program requirements and procedures in those facilities that conduct formal in-house training programs for their radiation protection workforces. 4 figures, 22 tables.

  10. Maintenance and operations contractor plan for transition to the project Hanford management contract (PHMC)

    SciTech Connect (OSTI)

    Waite, J.L.

    1996-04-12T23:59:59.000Z

    This plan has been developed by Westinghouse Hanford Company (WHC), and its subcontractors ICF Kaiser Hanford (ICF KH) and BCS Richland, Inc. (BCSR), at the direction of the US Department of Energy (DOE), Richland Operations Office (RL). WHC and its subcontractors are hereafter referred to as the Maintenance and Operations (M and O) Contractor. The plan identifies actions involving the M and O Contractor that are critical to (1) prepare for a smooth transition to the Project Hanford Management Contractor (PHMC), and (2) support and assist the PHMC and RL in achieving transition as planned, with no or minimal impact to ongoing baseline activities. The plan is structured around two primary phases. The first is the pre-award phase, which started in mid-February 1996 and is currently scheduled to be completed on June 1, 1996, at which time the contract is currently planned to be awarded. The second is the follow-on four-month post-award phase from June 1, 1996, until October 1, 1996. Considering the magnitude and complexity of the scope of work being transitioned, completion in four months will require significant effort by all parties. To better ensure success, the M and O Contractor has developed a pre-award phase that is intended to maximize readiness for transition. Priority is given to preparation for facility assessments and processing of personnel, as these areas are determined to be on the critical path for transition. In addition, the M and O Contractor will put emphasis during the pre-award phase to close out open items prior to contract award, to include grievances, employee concerns, audit findings, compliance issues, etc.

  11. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C. Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-05-18T23:59:59.000Z

    The Order establishes policies and procedures for managing DOE and NNSA management and operating (M&O) contractors and other facility management contractor employees assigned to the Washington, D.C., area.

  12. UWB delay and multiply receiver

    DOE Patents [OSTI]

    Dallum, Gregory E.; Pratt, Garth C.; Haugen, Peter C.; Romero, Carlos E.

    2013-09-10T23:59:59.000Z

    An ultra-wideband (UWB) delay and multiply receiver is formed of a receive antenna; a variable gain attenuator connected to the receive antenna; a signal splitter connected to the variable gain attenuator; a multiplier having one input connected to an undelayed signal from the signal splitter and another input connected to a delayed signal from the signal splitter, the delay between the splitter signals being equal to the spacing between pulses from a transmitter whose pulses are being received by the receive antenna; a peak detection circuit connected to the output of the multiplier and connected to the variable gain attenuator to control the variable gain attenuator to maintain a constant amplitude output from the multiplier; and a digital output circuit connected to the output of the multiplier.

  13. Signal processor for processing ultrasonic receiver signals

    DOE Patents [OSTI]

    Fasching, George E. (Morgantown, WV)

    1980-01-01T23:59:59.000Z

    A signal processor is provided which uses an analog integrating circuit in conjunction with a set of digital counters controlled by a precision clock for sampling timing to provide an improved presentation of an ultrasonic transmitter/receiver signal. The signal is sampled relative to the transmitter trigger signal timing at precise times, the selected number of samples are integrated and the integrated samples are transferred and held for recording on a strip chart recorder or converted to digital form for storage. By integrating multiple samples taken at precisely the same time with respect to the trigger for the ultrasonic transmitter, random noise, which is contained in the ultrasonic receiver signal, is reduced relative to the desired useful signal.

  14. RECEIVED

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem Not Found Item Not Foundenhancer activity than FINAL Progress Report Project#ski

  15. Project Profile: Direct Supercritical Carbon Dioxide Receiver...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Direct Supercritical Carbon Dioxide Receiver Development Project Profile: Direct Supercritical Carbon Dioxide Receiver Development National Renewable Energy Laboratory logo The...

  16. Proceedings of the advanced research and technology development direct utilization, instrumentation and diagnostics contractors' review meeting

    SciTech Connect (OSTI)

    Geiling, D.W. (USDOE Morgantown Energy Technology Center, WV (USA)); Goldberg, P.M. (eds.) (USDOE Pittsburgh Energy Technology Center, PA (USA))

    1990-01-01T23:59:59.000Z

    The 1990 Advanced Research and Technology Development (AR TD) Direct Utilization, and Instrumentation and Diagnostics Contractors Review Meeting was held September 16--18, 1990, at the Hyatt at Chatham Center in Pittsburgh, PA. The meeting was sponsored by the US Department of Energy (DOE), Office of Fossil Energy, and the Pittsburgh and Morgantown Energy Technology Centers. Each year the meeting provides a forum for the exchange of information among the DOE AR TD contractors and interested parties. This year's meeting was hosted by the Pittsburgh Energy Technology Center and was attended by 120 individuals from industry, academia, national laboratories, and other governmental agencies. Papers were presented on research addressing coal surface, science, devolatilization and combustion, ash behavior, emission controls for gases particulates, fluid bed combustion and utilization in diesels and turbines. Individual reports are processed separately for the data bases.

  17. Pollution prevention opportunity assessment approach, training, and technical assistance for DOE contractors. FY 1995 report

    SciTech Connect (OSTI)

    Pemberton, S.

    1996-02-01T23:59:59.000Z

    The Department of Energy and its contractors are faced with environmental concerns and large waste management costs. Federal legislation and DOE Orders require sites to develop waste minimization/pollution prevention programs. In response to these requirements, the Kansas City Plant developed a pollution prevention tool called a pollution prevention opportunity assessment (PPOA). Pilot assessments resulted in the development of a graded approach to reduce the amount of effort required for activities that utilized nonhazardous and/or low-volume waste streams. The project`s objectives in FY95 were to validate DOE`s PPOA Graded Approach methodology, provide PPOA training and technical assistance to interested DOE personnel and DOE contractors, enhance the methodology with energy analysis and tools for environmental restoration activities, implement a DOE-wide PPOA database, and provide support to DOE EM-334 in the completion of a report which estimates the future potential for pollution prevention and waste minimization in the DOE complex.

  18. The use of binding arbitration for Arizona's public works disputes as viewed from the contractor's perspective

    E-Print Network [OSTI]

    Bluff, Michael Robert

    1989-01-01T23:59:59.000Z

    works projects are derived from several sources. The purpose of this section is to review these sources and explain how they are used to deal with contract claims. The basic source of statutory procedures for filing claims against a public body... wastewater treatment plant for a county in Southern Arizona. During the course of the project, certain disputes arose between the contractor and county over amounts owed under the contract. The prime contract contained a binding arbitration clause...

  19. APOLLO 15 24 j A~1~ A. D. Little LRRR Contractor Parts List !

    E-Print Network [OSTI]

    Rathbun, Julie A.

    l ' 0 ~ R!V. N APOLLO 15 24 j A~1~ A. D. Little LRRR Contractor Parts List ! IPAGE 1 OF L ~TE~3 are as follows: (1) EASEP, Apollo 11, EATM-51, 29 January 1969. (2) ALSEP, Apollo 14, A TM 869A, 20 August 1970. (3) ALSEP, Apollo 15, A TM 924, 24 November 1970. Prepared by: F .... well ALSEP Reliability #12

  20. Tank waste remediation system (TWRS) privatization contractor samples waste envelope D material 241-C-106

    SciTech Connect (OSTI)

    Esch, R.A.

    1997-04-14T23:59:59.000Z

    This report represents the Final Analytical Report on Tank Waste Remediation System (TWRS) Privatization Contractor Samples for Waste Envelope D. All work was conducted in accordance with ''Addendum 1 of the Letter of Instruction (LOI) for TWRS Privatization Contractor Samples Addressing Waste Envelope D Materials - Revision 0, Revision 1, and Revision 2.'' (Jones 1996, Wiemers 1996a, Wiemers 1996b) Tank 241-C-1 06 (C-106) was selected by TWRS Privatization for the Part 1A Envelope D high-level waste demonstration. Twenty bottles of Tank C-106 material were collected by Westinghouse Hanford Company using a grab sampling technique and transferred to the 325 building for processing by the Pacific Northwest National Laboratory (PNNL). At the 325 building, the contents of the twenty bottles were combined into a single Initial Composite Material. This composite was subsampled for the laboratory-scale screening test and characterization testing, and the remainder was transferred to the 324 building for bench-scale preparation of the Privatization Contractor samples.

  1. Use of Management and Operating Contractor and National Laboratory Employees for Services in the D.C. Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-05T23:59:59.000Z

    This Notice provides requirements for Headquarters use of employees from Management and Operating (M&O) contractors and National Laboratories and establishes limitations on payments to those employees whose assignments to Headquarters exceed 365 days.

  2. Hybrid sodium heat pipe receivers for dish/Stirling systems

    SciTech Connect (OSTI)

    Laing, D.; Reusch, M. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V., Stuttgart (Germany). Inst. fuer Technische Thermodynamik

    1997-12-31T23:59:59.000Z

    The design of a hybrid solar/gas heat pipe receiver for the SBP 9 kW dish/Stirling system using a United Stirling AB V160 Stirling engine and the results of on-sun testing in alternative and parallel mode will be reported. The receiver is designed to transfer a thermal power of 35 kW. The heat pipe operates at around 800 C, working fluid is sodium. Operational options are solar-only, gas augmented and gas-only mode. Also the design of a second generation hybrid heat pipe receiver currently developed under a EU-funded project, based on the experience gained with the first hybrid receiver, will be reported. This receiver is designed for the improved SPB/L. and C.-10 kW dish/Stirling system with the reworked SOLO V161 Stirling engine.

  3. INTEGRATED SAFETY MANAGEMENT SYSTEM SAFETY CULTURE IMPROVEMENT INITIATIVE

    SciTech Connect (OSTI)

    MCDONALD JA JR

    2009-01-16T23:59:59.000Z

    In 2007, the Department of Energy (DOE) identified safety culture as one of their top Integrated Safety Management System (ISMS) related priorities. A team was formed to address this issue. The team identified a consensus set of safety culture principles, along with implementation practices that could be used by DOE, NNSA, and their contractors. Documented improvement tools were identified and communicated to contractors participating in a year long pilot project. After a year, lessons learned will be collected and a path forward determined. The goal of this effort was to achieve improved safety and mission performance through ISMS continuous improvement. The focus of ISMS improvement was safety culture improvement building on operating experience from similar industries such as the domestic and international commercial nuclear and chemical industry.

  4. UWB communication receiver feedback loop

    DOE Patents [OSTI]

    Spiridon, Alex (Palo Alto, CA); Benzel, Dave (Livermore, CA); Dowla, Farid U. (Castro Valley, CA); Nekoogar, Faranak (San Ramon, CA); Rosenbury, Erwin T. (Castro Valley, CA)

    2007-12-04T23:59:59.000Z

    A novel technique and structure that maximizes the extraction of information from reference pulses for UWB-TR receivers is introduced. The scheme efficiently processes an incoming signal to suppress different types of UWB as well as non-UWB interference prior to signal detection. Such a method and system adds a feedback loop mechanism to enhance the signal-to-noise ratio of reference pulses in a conventional TR receiver. Moreover, sampling the second order statistical function such as, for example, the autocorrelation function (ACF) of the received signal and matching it to the ACF samples of the original pulses for each transmitted bit provides a more robust UWB communications method and system in the presence of channel distortions.

  5. Accounts Receivable Western Michigan University

    E-Print Network [OSTI]

    de Doncker, Elise

    Accounts Receivable Western Michigan University 1903 W. Michigan Avenue Kalamazoo, MI 49008 have read the Western Michigan University Third Party Billing Policy and agree to the terms. I am authorizing Western Michigan University to bill for the specified tuition and related fees for the term

  6. Accounts Receivable Western Michigan University

    E-Print Network [OSTI]

    de Doncker, Elise

    Accounts Receivable Western Michigan University 1903 W. Michigan Avenue Kalamazoo, MI 49008-5210 269 387-4251 Fax 269 387-4227 THIRD PARTY BILLING POLICY Western Michigan University (WMU# (269) 387-4227 Western Michigan University 1903 W. Michigan Avenue E-mail: wmu

  7. SAW correlator spread spectrum receiver

    DOE Patents [OSTI]

    Brocato, Robert W

    2014-04-01T23:59:59.000Z

    A surface acoustic wave (SAW) correlator spread-spectrum (SS) receiver is disclosed which utilizes a first demodulation stage with a chip length n and a second demodulation stage with a chip length m to decode a transmitted SS signal having a code length l=n.times.m which can be very long (e.g. up to 2000 chips or more). The first demodulation stage utilizes a pair of SAW correlators which demodulate the SS signal to generate an appropriate code sequence at an intermediate frequency which can then be fed into the second demodulation stage which can be formed from another SAW correlator, or by a digital correlator. A compound SAW correlator comprising two input transducers and a single output transducer is also disclosed which can be used to form the SAW correlator SS receiver, or for use in processing long code length signals.

  8. Receiver designs for multiuser underwater acoustic communications

    E-Print Network [OSTI]

    Cho, Steve E.

    2012-01-01T23:59:59.000Z

    Receiver block diagram employing SIC, ATR, MP, and a jointReceiver block diagram employing SIC, ATR, MP, and a joint

  9. Investigation of aerowindows for solar receivers. Final report

    SciTech Connect (OSTI)

    Not Available

    1984-05-04T23:59:59.000Z

    The use of aerowindows to improve the efficiency and operation of central solar receivers has been analyzed to determine the conditions under which such improvements are possible. The results have shown that the aerowindow solar receiver concept is both technically and economically viable. The energy balance in the solar receiver, with and without the aerowindow, has been estimated with conservative models of the flow and heat transfer. For receiver cavity wall temperatures in the range of 1000 to 1600 K, there is a large positive energy benefit to using the aerowindow. Effective use of the aerowindow probably will require the use of recirculated gases from the cavity to reduce mixing and heat transfer at the cavity gas/aerowindow interface. Aerowindow technology is available now from industrial air curtain technology used on open warehouse entrances with dimensions similar to the apertures of large solar receivers. The cost of these devices is modest in terms of the cost of the energy saved, with the result that the payback period under broad ranges of receiver sizes and operating conditions is 1 to 5 years, even for relatively low equivalent costs for the thermal power being saved.

  10. NEW - DOE O 350.1 Chg 5, Contractor Human Resource Management Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    This directive establishes DOE responsibilities and requirements for the management and oversight of contractor Human Resource Management (HR) programs. Chg 1, 5-8-98; Chg 2, 11-22-09; Chg 3, 2-23-10; Chg 4, 4-29-13. DOE O 350.1 Chg 5, dated 9-30-2014, cancels DOE O 350.1 Chg 4. The Order is revised to reflect the cancellation of Chapters 1-3 due to the incorporation of these chapters into DOE Order 350.3; reflect organizational changes; delete reference to the DOE Retrospective Rating Insurance Plan, which is no longer available; remove the CRD from Chapter VII.

  11. Security Requirements for Remote Access to DOE and Applicable Contractor Information Technology Systems

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-02-19T23:59:59.000Z

    The Notice establishes DOE policy requirements and responsibilities for remote connections to DOE and contractor information technology systems. The Notice will also ensure compliance with the requirements of DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03, to protect DOE information and information technology systems commensurate with the risk and magnitude of harm that could result from their unauthorized access, use, disclosure, modification or destruction. DOE N 205.15, dated 3/18/05, extends this directive until 3/18/06. No cancellations.

  12. Third-party/shared savings initiatives at DOE's government-owned/contractor-operated sites

    SciTech Connect (OSTI)

    Petrolati, V.P.

    1986-03-01T23:59:59.000Z

    To promote energy conservation at its government owned/contractor operated (GOCO) facilities, DOE implemented the In-house Energy Management (IHEM) Program. In early FY 1984, the IHEM program became interested in the concept of third-party financing as a potential supplement for its appropriated budget. The basic approach to this activity is discussed, including some of the initial concerns of third-party/shared savings financing at DOE facilities. The legal and procurement issues involved are discussed in detail. Planned initiatives are also discussed.

  13. UMTRA project technical assistance contractor quality assurance implementation plan for surface and ground water, Revision 2

    SciTech Connect (OSTI)

    NONE

    1995-11-01T23:59:59.000Z

    This document contains the Technical Assistance Contractor (TAC) Quality Assurance Implementation Plan (QAIP) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. The QAIP outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QA program is designed to use monitoring, audit, and surveillance activities as management tools to ensure that UMTRA Project activities are carried out in amanner to protect public health and safety, promote the success of the UMTRA Project, and meet or exceed contract requirements.

  14. AUDIT REPORT Follow-Up Audit of Contractor Intergovernmental Personnel Act

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartmentDepartment of2 of 5) ALARA TrainingANDREWManagementof Contractor

  15. Contractor Human Resources | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And Bylaws |ContactFlowDecember01 SF-30156Contractor

  16. Irrigation Retrofit Program Steps to Improving sprinkler system efficiency

    E-Print Network [OSTI]

    Jawitz, James W.

    Irrigation Retrofit Program Steps to Improving sprinkler system efficiency Step 1. Replace Program provides rebates for improving urban landscape irrigation systems. Homeowners Associations can receive up to $400 for upgrading their irrigation system. In order to receive reimbursement , sign up

  17. Receiving Water and Other Impacts Robert Pitt

    E-Print Network [OSTI]

    Pitt, Robert E.

    5-1 Chapter 5 Receiving Water and Other Impacts Robert Pitt Desired Water Uses Versus Stormwater Impacts The main purpose of treating stormwater is to reduce its adverse impacts on receiving water of the detrimental effects that runoff is actually having on a receiving water. Urban receiving waters may have many

  18. Baseload Nitrate Salt Central Receiver Power Plant Design Final Report

    SciTech Connect (OSTI)

    Tilley, Drake; Kelly, Bruce; Burkholder, Frank

    2014-12-12T23:59:59.000Z

    The objectives of the work were to demonstrate that a 100 MWe central receiver plant, using nitrate salt as the receiver coolant, thermal storage medium, and heat transport fluid in the steam generator, can 1) operate, at full load, for 6,400 hours each year using only solar energy, and 2) satisfy the DOE levelized energy cost goal of $0.09/kWhe (real 2009 $). To achieve these objectives the work incorporated a large range of tasks relating to many different aspects of a molten salt tower plant. The first Phase of the project focused on developing a baseline design for a Molten Salt Tower and validating areas for improvement. Tasks included a market study, receiver design, heat exchanger design, preliminary heliostat design, solar field optimization, baseline system design including PFDs and P&IDs and detailed cost estimate. The baseline plant met the initial goal of less than $0.14/kWhe, and reinforced the need to reduce costs in several key areas to reach the overall $0.09/kWhe goal. The major improvements identified from Phase I were: 1) higher temperature salt to improve cycle efficiency and reduce storage requirements, 2) an improved receiver coating to increase the efficiency of the receiver, 3) a large receiver design to maximize storage and meet the baseload hours objective, and 4) lower cost heliostat field. The second Phase of the project looked at advancing the baseline tower with the identified improvements and included key prototypes. To validate increasing the standard solar salt temperature to 600 °C a dynamic test was conducted at Sandia. The results ultimately proved the hypothesis incorrect and showed high oxide production and corrosion rates. The results lead to further testing of systems to mitigate the oxide production to be able to increase the salt temperature for a commercial plant. Foster Wheeler worked on the receiver design in both Phase I and Phase II looking at both design and lowering costs utilizing commercial fossil boiler manufacturing. The cost and design goals for the project were met with this task, but the most interesting results had to do with defining the failure modes and looking at a “shakedown analysis” of the combined creep-fatigue failure. A separate task also looked at improving the absorber coatings on the receiver tubes that would improve the efficiency of the receiver. Significant progress was made on developing a novel paint with a high absorptivity that was on par with the current Pyromark, but shows additional potential to be optimized further. Although the coating did not meet the emissivity goals, preliminary testing the new paint shows potential to be much more durable, and potential to improve the receiver efficiency through a higher average absorptivity over the lifetime. Additional coatings were also designed and modeled results meet the project goals, but were not tested. Testing for low cycle fatigue of the full length receiver tubes was designed and constructed, but is still currently undergoing testing. A novel small heliostat was developed through an extensive brainstorming and down select. The concept was then detailed further with inputs from component testing and eventually a full prototype was built and tested. This task met or exceeded the accuracy and structure goals and also beat the cost goal. This provides a significant solar field costs savings for Abengoa that will be developed further to be used in future commercial plants. Ultimately the $0.09/kWhe (real 2009 $) and 6,400 hours goals of the project were met.

  19. Receiving Basin for Offsite Fuels and the Resin Regeneration Facility Safety Analysis Report, Executive Summary

    SciTech Connect (OSTI)

    Shedrow, C.B.

    1999-11-29T23:59:59.000Z

    The Safety Analysis Report documents the safety authorization basis for the Receiving Basin for Offsite Fuels (RBOF) and the Resin Regeneration Facility (RRF) at the Savannah River Site (SRS). The present mission of the RBOF and RRF is to continue in providing a facility for the safe receipt, storage, handling, and shipping of spent nuclear fuel assemblies from power and research reactors in the United States, fuel from SRS and other Department of Energy (DOE) reactors, and foreign research reactors fuel, in support of the nonproliferation policy. The RBOF and RRF provide the capability to handle, separate, and transfer wastes generated from nuclear fuel element storage. The DOE and Westinghouse Savannah River Company, the prime operating contractor, are committed to managing these activities in such a manner that the health and safety of the offsite general public, the site worker, the facility worker, and the environment are protected.

  20. Energy Renovations: Volume 14: HVAC - A Guide for Contractors to Share with Homeowners

    SciTech Connect (OSTI)

    Gilbride, Theresa L.; Baechler, Michael C.; Hefty, Marye G.; Hand, James R.; Love, Pat M.

    2011-08-29T23:59:59.000Z

    This report was prepared by PNNL for DOE's Building America program and is intended as a guide that energy performance contractors can share with homeowners to describe various energy-efficient options for heating, cooling, and ventilating existing homes. The report provides descriptions of many common and not-so-common HVAC systems, including their advantages and disadvantages, efficiency ranges and characteristics of high-performance models, typical costs, and climate considerations. The report also provides decision trees and tables of useful information for homeowners who are making decisions about adding, replacing, or upgrading existing HVAC equipment in their homes. Information regarding home energy performance assessments (audits) and combustion safety issues when replacing HVAC equipment are also provided.

  1. UMTRA project technical assistance contractor quality assurance implementation plan for surface and ground water

    SciTech Connect (OSTI)

    Not Available

    1994-09-01T23:59:59.000Z

    The Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance Contractor (TAC) Quality Assurance Implementation Plan (QAIP) outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QAIP is subordinate to the latest issue of the UMTRA Project TAC Quality Assurance Program Plan (QAPP). The QAIP addresses technical aspects of the TAC UMTRA Project surface and ground water programs. The QAIP is authorized and approved by the TAC Project Manager and QA manager. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization activities are carried out in a manner that will protect public health and safety, promote the success of the UMTRA Project and meet or exceed contract requirements.

  2. Waste isolation safety assessment program. Task 4. Third contractor information meeting

    SciTech Connect (OSTI)

    Not Available

    1980-06-01T23:59:59.000Z

    The Contractor Information Meeting (October 14 to 17, 1979) was part of the FY-1979 effort of Task 4 of the Waste Isolation Safety Assessment Program (WISAP): Sorption/Desorption Analysis. The objectives of this task are to: evaluate sorption/desorption measurement methods and develop a standardized measurement procedure; produce a generic data bank of nuclide-geologic interactions using a wide variety of geologic media and groundwaters; perform statistical analysis and synthesis of these data; perform validation studies to compare short-term laboratory studies to long-term in situ behavior; develop a fundamental understanding of sorption/desorption processes; produce x-ray and gamma-emitting isotopes suitable for the study of actinides at tracer concentrations; disseminate resulting information to the international technical community; and provide input data support for repository safety assessment. Conference participants included those subcontracted to WISAP Task 4, representatives and independent subcontractors to the Office of Nuclear Waste Isolation, representatives from other waste disposal programs, and experts in the area of waste/geologic media interaction. Since the meeting, WISAP has been divided into two programs: Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) (modeling efforts) and Waste/Rock Interactions Technology (WRIT) (experimental work). The WRIT program encompasses the work conducted under Task 4. This report contains the information presented at the Task 4, Third Contractor Information Meeting. Technical Reports from the subcontractors, as well as Pacific Northwest Laboratory (PNL), are provided along with transcripts of the question-and-answer sessions. The agenda and abstracts of the presentations are also included. Appendix A is a list of the participants. Appendix B gives an overview of the WRIT program and details the WRIT work breakdown structure for 1980.

  3. Low cost multi-channel GPS receiver

    E-Print Network [OSTI]

    Painter, John H.; Tachita, R.; Ikeda, K.; Teranishi, A.; Noe, P.S.

    1988-11-29T23:59:59.000Z

    An investigation was conducted on compact, multichannel GPS (global positioning system) receivers. The code generator and correlation equipment were simplified, attempting to avoid downgrading the properties possessed by multichannel receivers...

  4. Pantex receives National Weather Service recognition | National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    receives National Weather Service recognition | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  5. Worker Safety and Health Program for DOE (Including the National Nuclear Security Administration) Federal and Contractor Employees

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-10-20T23:59:59.000Z

    This document was developed to assist the Department of Energy (DOE or the Department) Federal and contractor employees in effectively developing, managing, and implementing a worker safety and health program. Cancels DOE G 440.1-1A and DOE G 440.1-8. Adm Chg 1, dated 3-22-13.

  6. Worker Safety and Health Program for DOE (Including the National Nuclear Security Administration) Federal and Contractor Employees

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-10-20T23:59:59.000Z

    This document was developed to assist the Department of Energy (DOE or the Department) Federal and contractor employees in effectively developing, managing, and implementing a worker safety and health program. Cancels DOE G 440.1-1A and DOE G 440.1-8. Adm Chg 1, dated 3-22-13, cancels DOE G 440.1-1B.

  7. Memorandum requesting a clarification of the circumstances under which a DOE Government Owned Contractor Operated (GOCO) facility

    Broader source: Energy.gov [DOE]

    Memorandum requesting a clarification of the circumstances under which a DOE Government Owned Contractor Operated (GOCO) facility may be considered a laser manufacturer and subject to FDA laser manufacturer requirements and other points of interpretation of the FDA Exemption Letter, 78EL-01DOE (DOE exemption or exemption) by the LSSG for GOCG facilities.

  8. Sponsored by the U.S. Department of Energy, the Hanford Site Prime Contractors, and the Pacific

    E-Print Network [OSTI]

    :30 ­ 11:15 "Future at Hanford: Energy Update /Community Outlook" Gary Peterson, Matt McCormick, MikeSponsored by the U.S. Department of Energy, the Hanford Site Prime Contractors, and the Pacific, municipalities, and state & federal agencies Networking opportunities with public and private sector decision

  9. Contractors Walk on the Wild Side...Why? Kristin Heinemeier, Ph.D., P.E., University of California, Davis

    E-Print Network [OSTI]

    California at Davis, University of

    Industry-Utility alliance comprised of contractors, manufacturers, distributors, unions, code officials comply with nor verify the energy efficiency measures of California's energy code (not to mention: · designed a flyer to explain the energy code to potential customers, so that they understand why bids

  10. Digging Begins at Hazardous Hanford Burial Ground- River Corridor Contractor Spent Two Years Preparing to Remediate 618-10

    Broader source: Energy.gov [DOE]

    RICHLAND, WASH. — After careful preparation and characterization, the Department of Energy’s (DOE) River Corridor contractor, Washington Closure Hanford, has begun remediation of one of the most hazardous burial grounds tackled to date on the Hanford Site’s River Corridor.

  11. 2014 National Small Business Contracting Summit- US Women’s Chamber of Commerce & National Association of Small Business Contractors

    Broader source: Energy.gov [DOE]

    The National Association of Small Business Contractors and the U.S. Women's Chamber of Commerce present the 2014 National Small Business Federal Contracting Summit. The event will include sessions on securing a fair share of federal contracting, legal issues, trends and opportunities.

  12. Digital-data receiver synchronization method and apparatus

    DOE Patents [OSTI]

    Smith, Stephen F.; Turner, Gary W.

    2005-12-06T23:59:59.000Z

    Digital-data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock may be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

  13. Digital-data receiver synchronization method and apparatus

    DOE Patents [OSTI]

    Smith, Stephen F. (Loudon, TN) [Loudon, TN; Turner, Gary W. (Clinton, TN) [Clinton, TN

    2009-09-08T23:59:59.000Z

    Digital data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock can be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

  14. A New Argus Direct Conversion Receiver and Digital Array Receiver/Processor

    E-Print Network [OSTI]

    Ellingson, Steven W.

    A New Argus Direct Conversion Receiver and Digital Array Receiver/Processor Grant Hampson and Steve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 References 20 Appendix A: Direct Conversion FPGA Source Code 21 Appendix B: Digital Receiver system. The new architecture consists of four main components: a Direct Conversion Receiver (DCR

  15. Digitally Assisted Multi-Channel Receivers

    E-Print Network [OSTI]

    Pentakota, Krishna Anand Santosh Spikanth

    2011-10-21T23:59:59.000Z

    -channel charge sampling receivers with sinc filter banks together with a complete system calibration and synchronization algorithm for the receiver. A unified model has been defined for the receiver containing all first order mismatches, offsets... and imperfections and a technique based on least mean squares algorithm is employed to track these errors. The performance of this technique under noisy channel conditions has been verified. The sinc filter bank is compared with the conventional analog filter...

  16. High-Flux Microchannel Solar Receiver

    Broader source: Energy.gov [DOE]

    This fact sheet describes a high-flux, microchannel solar receiver project awarded under the DOE's 2012 SunShot Concentrating Solar Power R&D award program. The team, led by Oregon State University, is working to demonstrate a microchannel-based solar receiver capable of absorbing high solar flux, while using a variety of liquid and gaseous working fluids. High-flux microchannel receivers have the potential to dramatically reduce the size and cost of a solar receiver by minimizing re-radiation and convective losses.

  17. Argonne receives 2014 Illinois Governor's Sustainability Award...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    receives 2014 Illinois Governor's Sustainability Award By Else Tennessen * November 10, 2014 Tweet EmailPrint On Oct. 23, Argonne National Laboratory was presented with the...

  18. Particle Receiver Integrated with Fludized Bed

    Broader source: Energy.gov (indexed) [DOE]

    of solar collection from the solar field to the receiver, energy conversion systems, and thermal energy storage. Concentrating Solar Power NATIONAL RENEWABLE ENERGY LABORATORY...

  19. Sandia Energy - Sandia Workers Received Entrepreneurial Spirit...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Received Entrepreneurial Spirit Awards Jim Pacheco built a reputation in concentrating solar power and was recruited by several companies when the technology took off in the...

  20. Receiver designs for multiuser underwater acoustic communications

    E-Print Network [OSTI]

    Cho, Steve E.

    2012-01-01T23:59:59.000Z

    compensate for the Doppler effect. The receiver discussed in? p = ? p /? p . The Doppler effect compresses or dilateschar- acterizes the Doppler effect in narrowband systems (W

  1. Sandia National Laboratories: Solar Receiver Shroud

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Receiver Shroud Pratt Whitney Rocketdyne Testing On December 19, 2012, in Concentrating Solar Power, EC, Energy, Facilities, National Solar Thermal Test Facility, News, News &...

  2. High-Temperature Falling-Particle Receiver

    Broader source: Energy.gov (indexed) [DOE]

    temperatures, nitrate salt fluids become chemically unstable. In contrast, direct absorption receivers using solid particles that fall through a beam of concentrated solar...

  3. Near-Blackbody Enclosed Particle Receiver

    Broader source: Energy.gov (indexed) [DOE]

    radiative principles. Innovative Receiver Design 7 2. Transform 2-D panel heat absorption to 3-D volumetric heat transfer by using arrayed absorber tubes. Aperture flux Wall...

  4. DOE contractors' workshop: Cellular and molecular aspects of radiation induced DNA damage and repair

    SciTech Connect (OSTI)

    Not Available

    1987-01-01T23:59:59.000Z

    For four decades the US Department of Energy and its predecessors have been the lead federal agency in supporting radiation biology research. Over the years emphasis in this program has gradually shifted from dose-effect studies on animals to research on the effects of radiations of various qualities on cells and molecules. Mechanistic studies on the action of radiation at the subcellular level are few in number and there is a need for more research in this area if we are to gain a better understanding of how radiation affects living cells. The intent of this workshop was to bring together DOE contractors and grantees who are investigating the effects of radiation at the cellular and molecular levels. The aims were to foster the exchange of information on research projects and experimental results, promote collaborative research efforts, and obtain an overview of research currently supported by the Health Effects Research Division of the Office of Health and Environmental Research. The latter is needed by the Office for program planning purposes. This report on the workshop which took place in Albuquerque, New Mexico on March 10-11, 1987, includes an overview with future research recommendations, extended abstracts of the plenary presentations, shorter abstracts of each poster presentation, a workshop agenda and the names and addresses of the attendees.

  5. Proceedings of the seventh annual gasification and gas stream cleanup systems contractors review meeting: Volume 1

    SciTech Connect (OSTI)

    Ghate, M.R.; Markel, K.E. Jr.; Jarr, L.A.; Bossart, S.J. (eds.)

    1987-08-01T23:59:59.000Z

    On June 16 through 19, 1987, METC sponsored the Seventh Annual Gasification and Gas Stream Cleanup Systems Contractors Review Meeting which was held at the Sheraton Lakeview Conference Center in Morgantown, West Virginia. The primary purpose of the meeting was threefold: to review the technical progress and current status of the gasification and gas stream cleanup projects sponsored by the Department of Energy; to foster technology exchange among participating researchers and other technical communities; to facilitate interactive dialogues which would identify research needs that would make coal-based gasification systems more attractive economically and environmentally. More than 310 representatives of Government, academia, industry, and foreign energy research organizations attended the 4-day meeting. Fifty-three papers and thirty poster displays were presented summarizing recent developments in the gasification and gas stream cleanup programs. Volume I covers information presented at sessions 1 through 4 on systems for the production of Co-products and industrial fuel gas, environmental projects, and components and materials. Individual papers have been processed for the Energy Data Base.

  6. Proceedings of the seventh annual gasification and gas stream cleanup systems contractors review meeting: Volume 2

    SciTech Connect (OSTI)

    Ghate, M.R.; Markel, K.E. Jr.; Jarr, L.A.; Bossart, S.J. (eds.)

    1987-08-01T23:59:59.000Z

    On June 16 through 19, 1987, METC sponsored the Seventh Annual Gasification and Gas Stream Cleanup Systems Contractors Review Meeting which was held at the Sheraton Lakeview Conference Center in Morgantown, West Virginia. The primary purpose of the meeting was threefold: to review the technical progress and current status of the gasification and gas stream cleanup projects sponsored by the Department of Energy; to foster technology exchange among participating researchers and other technical communities; to facilitate interactive dialogues which would identify research needs that would make coal-based gasification systems more attractive economically and environmentally. More than 310 representatives of Government, academia, industry, and foreign energy research organizations attended the 4-day meeting. Fifty-three papers and thirty poster dsplays were presented summarizing recent developments in the gasification and gas stream cleanup programs. Volume II covers papers presented at sessions 5 and 6 on system for the production of synthesis gas, and on system for the production of power. All papers have been processed for inclusion in the Energy Data Base.

  7. DOE technical standards list: Directory of DOE and contractor personnel involved in non-government standards activities

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    The body of this document contains a listing of DOE employees and DOE contractors who have submitted form DOE F 1300.2, Record of Non-Government Standards Activity, which is attached to the end of this document. Additional names were added from rosters supplied by non-Government standards bodies. The committees or governing bodies in which the person participates is listed after each name. An asterisk preceding the committee notation indicates that the person has identified himself or herself as the DOE representative on that committee. Appendices to this document are also provided to sort the information by the parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees. DOE employees and contractors listed in this technical standards list are those recorded as of May 1, 1999.

  8. DOE technical standards list: Directory of DOE and contractor personnel involved in non-government standards activities

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    The body of this document contains a listing of DOE employees and DOE contractors who have submitted form DOE F 1300.2, Record of Non-Government Standards Activity, which is attached to the end of this document and to DOE Order 1300.2A. Additional names were added from rosters supplied by non-Government standards bodies. The committees or governing bodies in which the person participates is listed after each name. An asterisk preceding the committee notation indicates that the person has identified himself or herself as the DOE representative on that committee. Appendices to this document are also provided to sort the information by the parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees. DOE employees and contractors listed in this TSL are those recorded as of July 1, 1996.

  9. Heat Pipe Solar Receiver Development Activities at Sandia National Laboratories

    SciTech Connect (OSTI)

    Adkins, D.R.; Andraka, C.E.; Moreno, J.B.; Moss, T.A.; Rawlinson, K.S.; Showalter, S.K.

    1999-01-08T23:59:59.000Z

    Over the past decade, Sandia National Laboratories has been involved in the development of receivers to transfer energy from the focus of a parabolic dish concentrator to the heater tubes of a Stirling engine. Through the isothermal evaporation and condensation of sodium. a heat-pipe receiver can efficiently transfer energy to an engine's working fluid and compensate for irregularities in the flux distribution that is delivered by the concentrator. The operation of the heat pipe is completely passive because the liquid sodium is distributed over the solar-heated surface by capillary pumping provided by a wick structure. Tests have shown that using a heat pipe can boost the system performance by twenty percent when compared to directly illuminating the engine heater tubes. Designing heat pipe solar receivers has presented several challenges. The relatively large area ({approximately}0.2 m{sup 2}) of the receiver surface makes it difficult to design a wick that can continuously provide liquid sodium to all regions of the heated surface. Selecting a wick structure with smaller pores will improve capillary pumping capabilities of the wick, but the small pores will restrict the flow of liquid and generate high pressure drops. Selecting a wick that is comprised of very tine filaments can increase the permeability of the wick and thereby reduce flow losses, however, the fine wick structure is more susceptible to corrosion and mechanical damage. This paper provides a comprehensive review of the issues encountered in the design of heat pipe solar receivers and solutions to problems that have arisen. Topics include: flow characterization in the receiver, the design of wick systems. the minimization of corrosion and dissolution of metals in sodium systems. and the prevention of mechanical failure in high porosity wick structures.

  10. Energy Management in Small Commercial Buildings: A Look at How HVAC Contractors Can Deliver Energy Efficiency to this Segment

    SciTech Connect (OSTI)

    Hult, Erin; Granderson, Jessica; Mathew, Paul

    2014-07-01T23:59:59.000Z

    While buildings smaller than 50,000 sq ft account for nearly half of the energy used in US commercial buildings, energy efficiency programs to-date have primarily focused on larger buildings. Interviews with stakeholders and a review of the literature indicate interest in energy efficiency from the small commercial building sector, provided solutions are simple and low-cost. An approach to deliver energy management to small commercial buildings via HVAC contractors and preliminary demonstration findings are presented. The energy management package (EMP) developed includes five technical elements: benchmarking and analysis of monthly energy use; analysis of interval electricity data (if available), a one-hour onsite walkthrough, communication with the building owner, and checking of results. This data-driven approach tracks performance and identifies low-cost opportunities, using guidelines and worksheets for each element to streamline the delivery process and minimize the formal training required. This energy management approach is unique from, but often complementary to conventional quality maintenance or retrofit-focused programs targeting the small commercial segment. Because HVAC contractors already serve these clients, the transaction cost to market and deliver energy management services can be reduced to the order of hundreds of dollars per year. This business model, outlined briefly in this report, enables the offering to benefit the contractor and client even at the modest expected energy savings in small buildings. Results from a small-scale pilot of this approach validated that the EMP could be delivered by contractors in 4-8 hours per building per year, and that energy savings of 3-5percent are feasible through this approach.

  11. Liquid cooled fiber thermal radiation receiver

    DOE Patents [OSTI]

    Butler, B.L.

    1985-03-29T23:59:59.000Z

    A radiation-to-thermal receiver apparatus for collecting radiation and converting it to thermal energy is disclosed. The invention includes a fibrous mat material which captures radiation striking the receiver. Captured radiation is removed from the fibrous mat material by a transparent fluid within which the material is bathed.

  12. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-10-29T23:59:59.000Z

    To establish policies and procedures for management of DOE, including NNSA, Management and Operating (M&O) and other facility management contractor employees assigned to the Washington, D.C., area. Cancels DOE O 350.2.

  13. Solar Reflectance Index Calculation Worksheet Instructions The purpose of this calculator is to enable contractors and homeowners to quickly and accurately

    E-Print Network [OSTI]

    Solar Reflectance Index Calculation Worksheet Instructions Usage: The purpose of this calculator is to enable contractors and homeowners to quickly and accurately calculate the solar reflectance product exceeds the Building Energy Efficiency Standards requirement for either the aged solar

  14. Accountable to beneficiaries? : the modern development enterprise & its contractors at war : lessons on accountability from Afghanistan to inform the contracting reform agenda

    E-Print Network [OSTI]

    Gupta, Huma

    2011-01-01T23:59:59.000Z

    This thesis will review the most relevant existing and proposed accountability mechanisms for private development and security contractors coming out of the human rights, public administration and anti-corruption fields. ...

  15. Benchmarking Current Perceptions of General Contractors of Return on Investment on Affordable Rehabilitation Housing Projects: A Case Study in the State of Texas

    E-Print Network [OSTI]

    Diaz-Puentes, Pedro Augusto

    2014-05-05T23:59:59.000Z

    This exploratory case study investigates the perception of general contractors of affordable rehabilitation housing projects in the state of Texas. This study was carried out in collaboration with a corporation that is working on affordable...

  16. Los Alamos National Laboratory employees receive Pollution Prevention...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Employees Receive Pollution Prevention Awards Los Alamos National Laboratory employees receive Pollution Prevention Awards Nearly 400 employees on 47 teams received Pollution...

  17. UMTRA Project-Level Cost Reduction/Productivity Improvement Program manual

    SciTech Connect (OSTI)

    NONE

    1995-06-01T23:59:59.000Z

    Mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project Cost Reduction/Productivity Improvement Program (CR/PIP) is to contribute to the UMTRA Project`s environmental restoration mission by providing the means to achieve and recognize continuous improvements and cost savings. This manual includes program definition, description of UMTRA project organizational responsibilities and interfaces with existing project functions, guidance to contractors, and definition of project-level functions.

  18. Solar central receiver systems comparative economics

    SciTech Connect (OSTI)

    Eicker, P J

    1980-04-01T23:59:59.000Z

    Several major conceptual design studies of solar central receiver systems and components have been completed in the last year. The results of these studies are used to compare the projected cost of electric power generation using central receiver systems with that of more conventional power generation. The cost estimate for a molten salt central receiver system is given. Levelized busbar energy cost is shown as a function of annual capacity factor indicating the fraction of the cost due to each of the subsystems. The estimated levelized busbar energy cost for a central receiver (70 to 90 mills per kilowatt hour) is compared with the levelized busbar energy cost for a new coal fired Rankine cycle plant. Sensitivities to the initial cost of coal and the delta fuel escalation are shown. (WHK)

  19. Collector/Receiver Characterization (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-08-01T23:59:59.000Z

    Fact sheet describing NREL CSP Program capabilities for collector/receiver characterization: determining optical efficiency, measuring heat loss, developing and testing concentrators, concentrating the sun's power, and optically characterizing CSP plants.

  20. One Video Stream to Serve Diverse Receivers

    E-Print Network [OSTI]

    Woo, Grace

    2008-10-18T23:59:59.000Z

    The fundamental problem of wireless video multicast is to scalably serve multiple receivers which may have very different channel characteristics. Ideally, one would like to broadcast a single stream that allows each ...

  1. Capability Improvement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Trinity NERSC-8 Capability Improvement Trinity NERSC-8 Capability Improvement As stated in Section 3.5 of the Technical Requirements, The performance of the ASC and NERSC...

  2. Not Your Father’s Weatherization: Q&A with Contractor Mike Richart

    Broader source: Energy.gov [DOE]

    From improvements in technology to increased consumer demand on quality, Mike Richart has seen vast changes in the energy efficiency industry.

  3. FY13 AWARD FEE DETERMINATION SCORECARD Contractor: Wastren-EnergX...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of HSPD-12 badging, implementation of temporary security fencing for D&D projects, the PIIOUO cyber security protection program, the improved quality of the cyber security...

  4. A handbook for solar central receiver design

    SciTech Connect (OSTI)

    Falcone, P.K.

    1986-12-01T23:59:59.000Z

    This Handbook describes central receiver technology for solar thermal power plants. It contains a description and assessment of the major components in a central receiver system configured for utility scale production of electricity using Rankine-cycle steam turbines. It also describes procedures to size and optimize a plant and discussed examples from recent system analyses. Information concerning site selection criteria, cost estimation, construction, and operation and maintenance is also included, which should enable readers to perform design analyses for specific applications.

  5. Supplier selection and supplier management improvements at an analytical instrument manufacturing company

    E-Print Network [OSTI]

    He, Yan, M. Eng. Massachusetts Institute of Technology

    2014-01-01T23:59:59.000Z

    This thesis addresses the challenges of improving the quality of parts received from suppliers at Waters, an analytical instrument manufacturing company. Preliminary analysis identified improvement opportunities at evaluation ...

  6. Power efficiency for very high temperature solar thermal cavity receivers

    DOE Patents [OSTI]

    McDougal, Allan R. (LaCanada-Flintridge, CA); Hale, Robert R. (Upland, CA)

    1984-01-01T23:59:59.000Z

    This invention is an improved solar energy cavity receiver for exposing materials and components to high temperatures. The receiver includes a housing having an internal reflective surface defining a cavity and having an inlet for admitting solar radiation thereto. A photothermal absorber is positioned in the cavity to receive radiation from the inlet. A reflective baffle is positioned between the absorber and the inlet to severely restrict the re-radiation of energy through the inlet. The front surface of the baffle defines a narrow annulus with the internal reflective surface of the housing. The front surface of the baffle is contoured to reflect incoming radiation onto the internal surface of the housing, from which it is reflected through the annulus and onto the front surface of the absorber. The back surface of the baffle intercepts infrared radiation from the front of the absorber. With this arrangement, a high percentage of the solar power input is retained in the cavity; thus, high internal temperatures are attained.

  7. Liquid cooled, linear focus solar cell receiver

    DOE Patents [OSTI]

    Kirpich, Aaron S. (Broomall, PA)

    1985-01-01T23:59:59.000Z

    Separate structures for electrical insulation and thermal conduction are established within a liquid cooled, linear focus solar cell receiver for use with parabolic or Fresnel optical concentrators. The receiver includes a V-shaped aluminum extrusion having a pair of outer faces each formed with a channel receiving a string of solar cells in thermal contact with the extrusion. Each cell string is attached to a continuous glass cover secured within the channel with spring clips to isolate the string from the external environment. Repair or replacement of solar cells is effected simply by detaching the spring clips to remove the cover/cell assembly without interrupting circulation of coolant fluid through the receiver. The lower surface of the channel in thermal contact with the cells of the string is anodized to establish a suitable standoff voltage capability between the cells and the extrusion. Primary electrical insulation is provided by a dielectric tape disposed between the coolant tube and extrusion. Adjacent solar cells are soldered to interconnect members designed to accommodate thermal expansion and mismatches. The coolant tube is clamped into the extrusion channel with a releasably attachable clamping strip to facilitate easy removal of the receiver from the coolant circuit.

  8. Liquid cooled, linear focus solar cell receiver

    DOE Patents [OSTI]

    Kirpich, A.S.

    1983-12-08T23:59:59.000Z

    Separate structures for electrical insulation and thermal conduction are established within a liquid cooled, linear focus solar cell receiver for use with parabolic or Fresnel optical concentrators. The receiver includes a V-shaped aluminum extrusion having a pair of outer faces each formed with a channel receiving a string of solar cells in thermal contact with the extrusion. Each cell string is attached to a continuous glass cover secured within the channel with spring clips to isolate the string from the external environment. Repair or replacement of solar cells is effected simply by detaching the spring clips to remove the cover/cell assembly without interrupting circulation of coolant fluid through the receiver. The lower surface of the channel in thermal contact with the cells of the string is anodized to establish a suitable standoff voltage capability between the cells and the extrusion. Primary electrical insulation is provided by a dielectric tape disposed between the coolant tube and extrusion. Adjacent solar cells are soldered to interconnect members designed to accommodate thermal expansion and mismatches. The coolant tube is clamped into the extrusion channel with a releasably attachable clamping strip to facilitate easy removal of the receiver from the coolant circuit.

  9. Dish/stirling hybrid-receiver

    DOE Patents [OSTI]

    Mehos, Mark S. (Boulder, CO); Anselmo, Kenneth M. (Arvada, CO); Moreno, James B. (Albuquerque, NM); Andraka, Charles E. (Albuquerque, NM); Rawlinson, K. Scott (Albuquerque, NM); Corey, John (Melrose, NY); Bohn, Mark S. (Golden, CO)

    2002-01-01T23:59:59.000Z

    A hybrid high-temperature solar receiver is provided which comprises a solar heat-pipe-receiver including a front dome having a solar absorber surface for receiving concentrated solar energy, a heat pipe wick, a rear dome, a sidewall joining the front and the rear dome, and a vapor and a return liquid tube connecting to an engine, and a fossil fuel fired combustion system in radial integration with the sidewall for simultaneous operation with the solar heat pipe receiver, the combustion system comprising an air and fuel pre-mixer, an outer cooling jacket for tangentially introducing and cooling the mixture, a recuperator for preheating the mixture, a burner plenum having an inner and an outer wall, a porous cylindrical metal matrix burner firing radially inward facing a sodium vapor sink, the mixture ignited downstream of the matrix forming combustion products, an exhaust plenum, a fossil-fuel heat-input surface having an outer surface covered with a pin-fin array, the combustion products flowing through the array to give up additional heat to the receiver, and an inner surface covered with an extension of the heat-pipe wick, a pin-fin shroud sealed to the burner and exhaust plenums, an end seal, a flue-gas diversion tube and a flue-gas valve for use at off-design conditions to limit the temperature of the pre-heated air and fuel mixture, preventing pre-ignition.

  10. Low cost multi-channel GPS receiver 

    E-Print Network [OSTI]

    Painter, John H.; Tachita, R.; Ikeda, K.; Teranishi, A.; Noe, P.S.

    1988-11-29T23:59:59.000Z

    and receiver. 455 CH2675-7/88/0000-0455 $1.00 0 1988 IEEE Authorized licensed use limited to: Texas A M University. Downloaded on February 18,2010 at 16:25:37 EST from IEEE Xplore. Restrictions apply. In the section entitled Receiver Configuration...:25:37 EST from IEEE Xplore. Restrictions apply. NCO - For the carrier regeneration of the satellite signals, an NCO is used. The NCO, similar to the code generator, inputs a clock pulse of a constant frequency to control the phase of the regenerated...

  11. Implementation aspects of nonsynchronized binary receivers

    E-Print Network [OSTI]

    Wills, Wesley Mark

    1990-01-01T23:59:59.000Z

    , the signal is assumed to be transmitted across an additive white Gaussian noise (AWGN) channel. A. Likelihood Functions Assume that the modulation sequence x = (zi: z~ = kl, j = 1, 2, . . . , 1V) is trans- mitted over the AWGN channel as NRZ pulses, p... ~ ~ ~ S tart of Observations Fig. 2. Timing Error of Unsynchronized Receiver. zj+2 Prj 2 &Vs VAA[rtj I x, r] = ?, i = 1, 2, (2. 6) where r is the normalized timing error, r'/T. Finally, the density of the received vector r = frtt&rrt??N&rrtv) conditioned...

  12. Genomics:GTL Contractor-Grantee Workshop IV and Metabolic Engineering Working Group Inter-Agency Conference on Metabolic Engineering 2006

    SciTech Connect (OSTI)

    Mansfield, Betty Kay [ORNL; Martin, Sheryl A [ORNL

    2006-02-01T23:59:59.000Z

    Welcome to the 2006 joint meeting of the fourth Genomics:GTL Contractor-Grantee Workshop and the six Metabolic Engineering Working Group Inter-Agency Conference. The vision and scope of the Genomics:GTL program continue to expand and encompass research and technology issues from diverse scientific disciplines, attracting broad interest and support from researchers at universities, DOE national laboratories, and industry. Metabolic engineering's vision is the targeted and purposeful alteration of metabolic pathways to improve the understanding and use of cellular pathways for chemical transformation, energy transduction, and supramolecular assembly. These two programs have much complementarity in both vision and technological approaches, as reflected in this joint workshop. GLT's challenge to the scientific community remains the further development and use of a broad array of innovative technologies and computational tools to systematically leverage the knowledge and capabilities brought to us by DNA sequencing projects. The goal is to seek a broad and predictive understanding of the functioning and control of complex systems--individual microbes, microbial communities, and plants. GTL's prominent position at the interface of the physical, computational, and biological sciences is both a strength and challenge. Microbes remain GTL's principal biological focus. In the complex 'simplicity' of microbes, they find capabilities needed by DOE and the nation for clean and secure energy, cleanup of environmental contamination, and sequestration of atmospheric carbon dioxide that contributes to global warming. An ongoing challenge for the entire GTL community is to demonstrate that the fundamental science conducted in each of your research projects brings us a step closer to biology-based solutions for these important national energy and environmental needs.

  13. Licensee contractor and vendor inspection status report: Quarterly report, January--March 1996. Volume 20, Number 1

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    A fundamental premise of the US Nuclear Regulatory Commission (NRC) licensing and inspection program is that licensees are responsible for the proper construction and safe and efficient operation of their nuclear power plants. The Federal government and nuclear industry have established a system for the inspection of commercial nuclear facilities to provide for multiple levels of inspection and verification. Each licensee, contractor, and vendor participates in a quality verification process in compliance with requirements prescribed by the NRC`s rules and regulations (Title 10 of the Code of Federal Regulations). The NRC does inspections to oversee the commercial nuclear industry to determine whether its requirements are being met by licensees and their contractors, while the major inspection effort is performed by the industry within the framework of quality verification programs. This periodical covers the results of inspections performed by the NRC`s Special Inspection Branch, Vendor Inspection Section, that have been distributed to the inspected organizations during the period from January 1996 through March 1996.

  14. Licensee contractor and vendor inspection status report: Quarterly report, July--September 1997. Volume 21, Number 3

    SciTech Connect (OSTI)

    NONE

    1997-11-01T23:59:59.000Z

    A fundamental premise of the US Nuclear Regulatory Commission (NRC) licensing and inspection program is that licensees are responsible for the proper construction and safe and efficient operation of their nuclear power plants. The Federal government and nuclear industry have established a system for the inspection of commercial nuclear facilities to provide for multiple levels of inspection and verification. Each licensee, contractor, and vendor participates in a quality verification process in compliance with requirements prescribed by the NRC`s rules and regulations (Title 10 of the Code of Federal Regulations). The NRC does inspections to oversee the commercial nuclear industry to determine whether its requirements are being met by licensees and their contractors, while the major inspection effort is performed by the industry within the framework of quality verification programs. This periodical covers the results if inspections that were performed by the NRC`s Special Inspection Branch, Vendor Inspection Section, and that were distributed to the inspected organizations during the period from July through September 1997.

  15. Licensee contractor and vendor inspection status report: Quarterly report, January--March 1997. Volume 21, Number 1

    SciTech Connect (OSTI)

    NONE

    1997-07-01T23:59:59.000Z

    A fundamental premise of the US Nuclear Regulatory Commission (NRC) licensing and inspection program is that licensees are responsible for the proper construction and safe and efficient operation of their nuclear power plants. The Federal government and nuclear industry have established a system for the inspection of commercial nuclear facilities to provide for multiple levels of inspection and verification. Each licensee, contractor, and vendor participates in a quality verification process in compliance with requirements prescribed by the NRC`s rules and regulations (Title 10 of the Code of Federal Regulations). The NRC does inspections to oversee the commercial nuclear industry to determine whether its requirements are being met by licensees and their contractors, while the major inspection effort is performed by the industry within the framework of quality verification programs. This periodical covers the results of inspections performed by the NRC`s Special Inspection Branch, Vendor Inspection Section, that have been distributed to the inspected organizations during the period from January 1997 through March 1997.

  16. A contractor report to the Department of Energy on environmental management baseline programs and integration opportunities (discussion draft)

    SciTech Connect (OSTI)

    NONE

    1997-05-01T23:59:59.000Z

    In July 1996, the US Department of Energy (DOE) Assistant Secretary for Environmental Management (EM) chartered a government contractor led effort to develop a suite of technically defensible, integrated alternatives which meet the EM mission. The contractor team was challenged to ``think outside-the-box`` for solutions that cross traditional site boundaries and enable the programs to get the job done at an earlier date and at a lower cost. This report documents baseline programs current plans for material disposition and presents the opportunities for additional acceleration of cleanup and cost savings. A graphical depiction of the disposition of EM-owned waste and material from current state to final disposition is shown as disposition maps in Attachments 1, 3, 5, 7, 9, and 11. These disposition maps detail the material disposition at eleven major DOE sites as planned in the current discussion draft plan, Accelerating Cleanup: Focus on 2006. Maps reflecting material disposition at additional sites will be added in the future. Opportunities to further accelerate the cleanup of DOE-EM sites and reduce the overall cost of cleanup are depicted in the alternative disposition maps shown in Attachments 2, 4, 6, 8, 10, and 12. These integration opportunities bring nation-wide resources to bear on common problems facing the DOE sites.

  17. DOE Human Genome Program: Contractor-Grantee Workshop IV, November 13--17, 1994, Santa Fe, New Mexico

    SciTech Connect (OSTI)

    Not Available

    1994-10-01T23:59:59.000Z

    This volume contains the proceedings of the fourth Contractor-Grantee Workshop for the Department of Energy (DOE) Human Genome Program. Of the 204 abstracts in this book, some 200 describe the genome research of DOE-funded grantees and contractors located at the multidisciplinary centers at Lawrence Berkeley Laboratory, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory; other DOE-supported laboratories; and more than 54 universities, research organizations, and companies in the United States and abroad. Included are 16 abstracts from ongoing projects in the Ethical, Legal, and Social Issues (ELSI) component, an area that continues to attract considerable attention from a wide variety of interested parties. Three abstracts summarize work in the new Microbial Genome Initiative launched this year by the Office of Health and Environmental Research (OHER) to provide genome sequence and mapping data on industrially important microorganisms and those that live under extreme conditions. Many of the projects will be discussed at plenary sessions held throughout the workshop, and all are represented in the poster sessions.

  18. Measuring overall emittance of concentrator receiver pipes

    SciTech Connect (OSTI)

    Gerich, J.W.; Reitter, T.A.; Merriam, M.F.

    1980-03-01T23:59:59.000Z

    A simple and accurate method for measuring the overall emittance of receiver pipes used with cylindrical concentrators is described. Experimental measurements obtained for steel pipes with a black chrome over nickel selective surface are presented. The observed strong temperature dependence of emittance indicates that the use of room temperature emittance data will substantially overestimate collector efficiency. (SPH)

  19. Patent Issued Additional Office Actions Received

    E-Print Network [OSTI]

    Cui, Yan

    Patent Issued Additional Office Actions Received 3-12 mo. Respond to Office Action Patent attorney The patent examiner provides notification of which claims in the application have been rejected or accepted determines there are multiple inventions in 1 application. Patent Application Published 6 mo. Non

  20. Full-wave receiver architecture for the homodyne motion sensor

    DOE Patents [OSTI]

    Haugen, Peter C; Dallum, Gregory E; Welsh, Patrick A; Romero, Carlos E

    2013-11-19T23:59:59.000Z

    A homodyne motion sensor or detector based on ultra-wideband radar utilizes the entire received waveform through implementation of a voltage boosting receiver. The receiver includes a receiver input and a receiver output. A first diode is connected to the receiver output. A first charge storage capacitor is connected from between the first diode and the receiver output to ground. A second charge storage capacitor is connected between the receiver input and the first diode. A second diode is connected from between the second charge storage capacitor and the first diode to ground. The dual diode receiver performs voltage boosting of a RF signal received at the receiver input, thereby enhancing receiver sensitivity.

  1. A NEW SOLAR THERMAL RECEIVER UTILIZING SMALL PARTICLES

    E-Print Network [OSTI]

    Hunt, Arlon J.

    2011-01-01T23:59:59.000Z

    iuision, Ext. 6782 A New Solar Thermal Receiver UtilizingI \\D \\. }J F--' A NEW SOLAR THERMAL RECEIVER UTILIZING SMALL94720 ABSTRACT A new type of solar thermal receiver is being

  2. Seventy-three New Mexico students receive Los Alamos Employees...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Seventy-three students receive LAESF scholarships Seventy-three New Mexico students receive Los Alamos Employees' Scholarship Fund scholarships Raymond Fasano of Bernalillo High...

  3. Secretary Chu Announces 150 Students to Receive Graduate Fellowships...

    Energy Savers [EERE]

    150 Students to Receive Graduate Fellowships in Science, Mathematics and Engineering Secretary Chu Announces 150 Students to Receive Graduate Fellowships in Science, Mathematics...

  4. MAY 14, 2008 Chemistry and environmental science professor receives Carroll

    E-Print Network [OSTI]

    Reid, Scott A.

    MAY 14, 2008 Chemistry and environmental science professor receives Carroll College faculty award WAUKESHA, WIS.-- An associate professor of chemistry and environmental science has received an annual

  5. Los Alamos National Laboratory employees receive Pollution Prevention...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pollution Prevention Awardees Los Alamos National Laboratory employees receive Pollution Prevention Awards Nearly 400 employees on 47 teams received Pollution Prevention awards for...

  6. Sandia National Laboratories: Sandia Receives Award for Electronics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia Receives Award for Electronics Stewardship September 19, 2011 electronics stewardship award ALBUQUERQUE, N.M. - Sandia National Laboratories has received an award for...

  7. Highly linear SAW-less receiver design techniques for CDMA

    E-Print Network [OSTI]

    Kim, Nam Soo

    2010-01-01T23:59:59.000Z

    Pyo, “A low power RF direct-conversion receiver/transmitterconsiderations for direct-conversion receivers,” IEEE Trans.2009. [50] A. Abidi, “Direct-conversion radio transceivers

  8. An RF Receiver Architecture for Intra-Band Carrier Aggregation

    E-Print Network [OSTI]

    Hwu, Sy-Chyuan

    2013-01-01T23:59:59.000Z

    Noise for Low-Power Direct-Conversion Receivers,” IEEE J.system-on-chip design. Direct?Conversion Receiver LPF ADC

  9. Project Profile: High-Efficiency Receivers for Supercritical...

    Energy Savers [EERE]

    Efficiency Receivers for Supercritical Carbon Dioxide Cycles Project Profile: High-Efficiency Receivers for Supercritical Carbon Dioxide Cycles Brayton logo Brayton Energy, under...

  10. Y-12 employees receive awards recognizing excellence in nuclear...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    receive ... Y-12 employees receive awards recognizing excellence in nuclear weapons program Posted: October 6, 2014 - 9:09am Defense Programs 2013 Award of Excellence recipient...

  11. DOE Technical Standards List. Directory of DOE and contractor personnel involved in non-government standards activities

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    This is a periodic report on the level of agency participation in non-Government standards activities. This technical standards list is intended to assist US Department of Energy (DOE) management and other personnel involved in the DOE technical Standards Program by identifying those participating individuals. The body of this document contains a listing of DOE employees and DOE contractors who have submitted a Record of Non-Government Standards Activity. Additional names were added from rosters supplied by non-Government standards bodies. Appendices to this document are provided to list the information by parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees.

  12. Integrated Safety Management System Phase 1 and 2 Verification for the Environmental Restoration Contractor Volumes 1 and 2

    SciTech Connect (OSTI)

    CARTER, R.P.

    2000-04-04T23:59:59.000Z

    DOE Policy 450.4 mandates that safety be integrated into all aspects of the management and operations of its facilities. The goal of an institutionalized Integrated Safety Management System (ISMS) is to have a single integrated system that includes Environment, Safety, and Health requirements in the work planning and execution processes to ensure the protection of the worker, public, environment, and the federal property over the life cycle of the Environmental Restoration (ER) Project. The purpose of this Environmental Restoration Contractor (ERC) ISMS Phase MI Verification was to determine whether ISMS programs and processes were institutionalized within the ER Project, whether these programs and processes were implemented, and whether the system had promoted the development of a safety conscious work culture.

  13. Analysis, design, and application of circularly polarized RF receiver antennas for magnetic resonance imaging

    E-Print Network [OSTI]

    Usey, Michael Christopher

    1995-01-01T23:59:59.000Z

    , an example coil will be designed for significantly improved SNR over the spine, with a minimum of added cost and complexity. The receiver antenna will be evaluated in both lab and clinical environments, with the results presented in this thesis. Further MRI...

  14. EXIT Chart Analysis of Turbo-BLAST Receivers in Rayleigh Fading Channels

    E-Print Network [OSTI]

    Dai, Huaiyu

    EXIT Chart Analysis of Turbo-BLAST Receivers in Rayleigh Fading Channels Wenjun Li and Huaiyu Dai: Wli5@ncsu.edu, Huaiyu Dai@ncsu.edu Abstract-- Turbo-BLAST is an advanced space-time layered with Turbo-BLAST to combat the co-channel interference (CCI) and significantly improve the performance

  15. Sideband characterization and atmospheric observations with various 340 GHz heterodyne receivers

    SciTech Connect (OSTI)

    Renker, Matthias, E-mail: renker@iap.unibe.ch; Murk, Axel [Institute of Applied Physics, University of Bern, Bern (Switzerland); Rea, Simon P. [STFC Rutherford Appleton Laboratory, Didcot, Oxfordshire (United Kingdom); Emrich, A.; Frisk, U. [OMNISYS Instruments, Västra Frölunda (Sweden)

    2014-08-15T23:59:59.000Z

    This paper describes sideband response measurements and atmospheric observations with a double sideband and two Single Sideband (SSB) receiver prototypes developed for the multi-beam limb sounder instrument stratosphere-troposphere exchange and climate monitor radiometer. We first show an advanced Fourier-Transform Spectroscopy (FTS) method for sideband response and spurious signal characterization. We then present sideband response measurements of the different prototype receivers and we compare the results of the SSB receivers with sideband measurements by injecting a continuous wave signal into the upper and lower sidebands. The receivers were integrated into a total-power radiometer and atmospheric observations were carried out. The observed spectra were compared to forward model spectra to conclude on the sideband characteristics of the different receivers. The two sideband characterization methods show a high degree of agreement for both SSB receivers with various local oscillator settings. The measured sideband response was used to correct the forward model simulations. This improves the agreement with the atmospheric observations and explains spectral features caused by an unbalanced sideband response. The FTS method also allows to quantify the influence of spurious harmonic responses of the receiver.

  16. Proceedings of the joint contractors meeting: FE/EE Advanced Turbine Systems conference FE fuel cells and coal-fired heat engines conference

    SciTech Connect (OSTI)

    Geiling, D.W. [ed.

    1993-08-01T23:59:59.000Z

    The joint contractors meeting: FE/EE Advanced Turbine Systems conference FEE fuel cells and coal-fired heat engines conference; was sponsored by the US Department of Energy Office of Fossil Energy and held at the Morgantown Energy Technology Center, P.O. Box 880, Morgantown, West Virginia 26507-0880, August 3--5, 1993. Individual papers have been entered separately.

  17. Supplemental Requirements for the Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-10-19T23:59:59.000Z

    The Notice supplements review and approval requirements of DOE O 350.2A, Use of Management and Operating (M&O) or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area, dated 10-29-03.

  18. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C. Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-31T23:59:59.000Z

    To establish policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), management and operating (M&O) and other facility management contractor employees assigned to the Washington, D.C. area. Cancels DOE O 350.2A

  19. Comparison of management, overhead, and direct costs of six projects managed by the Department of Energy and Government-Owned, Contractor-Operated Laboratories

    SciTech Connect (OSTI)

    Not Available

    1981-09-30T23:59:59.000Z

    The report covers management, overhead, and direct cost data on six DOE projects - three managed directly by DOE, and three managed for DOE by government-owned, contractor-operated (GOCO) laboratories. These data provide comparison for decisions on contracting out for project management services. (GHT)

  20. PRESOLICITATION Category: A. Owner: Department of Energy, Oak Ridge National Laboratory -UT Battelle LLC (DOE Contractor), Oak Ridge National Laboratory, Bethel

    E-Print Network [OSTI]

    Hively, Lee M.

    Battelle LLC (DOE Contractor), Oak Ridge National Laboratory, Bethel Valley Road P.O. Box 2008, Oak Ridge-serial data to detect and forewarn of biomedical events and machine failures. UT-Battelle LLC (UT-Battelle process will be facilitated through appropriate licensing of UT-Battelle's intellectual property

  1. Type A Accident Investigation Report on the June 25, 1997, Contractor Inspector Fatality on the Satsop-Aberdeen #2 & #3 230 kV Line

    Broader source: Energy.gov [DOE]

    On June 27, 1997, I established a Type-A Accident Investigation Board to investigate the June 25, 1997 fatal contractor accident which occurred on BPA?s Satsop-Aberdeen #2 and #3 230-kV transmission lines right-of-way.

  2. CUNY EXPORT CONTROL PROCEDURES 17. Shipping/Receiving

    E-Print Network [OSTI]

    Rosen, Jay

    CUNY EXPORT CONTROL PROCEDURES 17. Shipping/Receiving This Section addresses the process for shipping and receiving tangible items under export license/authorization, transmission of export data. General Shipping and Receiving CUNY requires that Campus Shipping/Receiving personnel evaluate, for export

  3. Advanced motor driven clamped borehole seismic receiver

    DOE Patents [OSTI]

    Engler, B.P.; Sleefe, G.E.; Striker, R.P.

    1993-02-23T23:59:59.000Z

    A borehole seismic tool is described including a borehole clamp which only moves perpendicular to the borehole. The clamp is driven by an electric motor, via a right angle drive. When used as a seismic receiver, the tool has a three part housing, two of which are hermetically sealed. Accelerometers or geophones are mounted in one hermetically sealed part, the electric motor in the other hermetically sealed part, and the clamp and right angle drive in the third part. Preferably the tool includes cable connectors at both ends. Optionally a shear plate can be added to the clamp to extend the range of the tool.

  4. Advanced motor driven clamped borehole seismic receiver

    DOE Patents [OSTI]

    Engler, Bruce P. (Sandoval County, NM); Sleefe, Gerard E. (Bernalillo County, NM); Striker, Richard P. (Bernalillo County, NM)

    1993-01-01T23:59:59.000Z

    A borehole seismic tool including a borehole clamp which only moves perpendicular to the borehole. The clamp is driven by an electric motor, via a right angle drive. When used as a seismic receiver, the tool has a three part housing, two of which are hermetically sealed. Accelerometers or geophones are mounted in one hermetically sealed part, the electric meter in the other hermetically sealed part, and the clamp and right angle drive in the third part. Preferably the tool includes cable connectors at both ends. Optionally a shear plate can be added to the clamp to extend the range of the tool.

  5. LM Receives Sustainability Award | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetter Report:40PM toLED Lighting5-15 LM 05-15FIMSLM Receives

  6. Tom Harper receives cyber security award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesisAppliances Tips:Harper receives cyber security

  7. WIPP receives 9,000th shipment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsing Maps1DOE Awards Contract for19,WIPP receives 9,000th

  8. Fry receives Charles W. Briggs Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.Newof Energy ForrestalPrinceton Plasma Physics09,Fry receives

  9. RDC receives award for Accelerate Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70COMMUNITYResponses:December 11, 2014 PageRDC Receives Award

  10. Facility Management Contractors and other Contractors Directory |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian NuclearandJunetrackEllen|JulyR--FOIA SupportDOE's FY3Facility

  11. LLNL oil shale project review: METC third annual oil shale contractors meeting

    SciTech Connect (OSTI)

    Cena, R.J.; Coburn, T.T.; Taylor, R.W.

    1988-01-01T23:59:59.000Z

    The Lawrence Livermore National Laboratory combines laboratory and pilot-scale experimental measurements with mathematical modeling of fundamental chemistry and physics to provide a technical base for evaluating oil shale retorting alternatives. Presented herein are results of four research areas of interest in oil shale process development: Recent Progress in Solid-Recycle Retorting and Related Laboratory and Modeling Studies; Water Generation During Pyrolysis of Oil Shale; Improved Analytical Methods and Measurements of Rapid Pyrolysis Kinetics for Western and Eastern Oil Shale; and Rate of Cracking or Degradation of Oil Vapor In Contact with Oxidized Shale. We describe operating results of a 1 tonne-per-day, continuous-loop, solid-recycle, retort processing both Western And Eastern oil shale. Sulfur chemistry, solid mixing limits, shale cooling tests and catalyst addition are all discussed. Using a triple-quadrupole mass spectrometer, we measure individual species evolution with greater sensitivity and selectivity. Herein we discuss our measurements of water evolution during ramped heating of Western and Eastern oil shale. Using improved analytical techniques, we determine isothermal pyrolysis kinetics for Western and Eastern oil shale, during rapid heating, which are faster than previously thought. Finally, we discuss the rate of cracking of oil vapor in contact with oxidized shale, qualitatively using a sand fluidized bed and quantitatively using a vapor cracking apparatus. 3 refs., 4 figs., 1 tab.

  12. Solar central receiver heliostat reflector assembly

    DOE Patents [OSTI]

    Horton, Richard H. (Schenectady, NY); Zdeb, John J. (Clifton Park, NY)

    1980-01-01T23:59:59.000Z

    A heliostat reflector assembly for a solar central receiver system comprises a light-weight, readily assemblable frame which supports a sheet of stretchable reflective material and includes mechanism for selectively applying tension to and positioning the sheet to stretch it to optical flatness. The frame is mounted on and supported by a pipe pedestal assembly that, in turn, is installed in the ground. The frame is controllably driven in a predetermined way by a light-weight drive system so as to be angularly adjustable in both elevation and azimuth to track the sun and efficiently continuously reflect the sun's rays to a focal zone, i.e. central receiver, which forms part of a solar energy utilization system, such as a solar energy fueled electrical power generation system. The frame may include a built-in system for testing for optical flatness of the reflector. The preferable geometric configuration of the reflector is octagonal; however, it may be other shapes, such as hexagonal, pentagonal or square. Several different embodiments of means for tensioning and positioning the reflector to achieve optical flatness are disclosed. The reflector assembly is based on the stretch frame concept which provides an extremely light-weight, simple, low-cost reflector assembly that may be driven for positioning and tracking by a light-weight, inexpensive drive system.

  13. DOE Human Genome Program report of the second contractor-grantee workshop

    SciTech Connect (OSTI)

    Not Available

    1991-08-01T23:59:59.000Z

    The number of genome-funded projects has increased rapidly, and the Human Genome Initiative has grown into a flourishing program, with a complementary counterpart at the National Institutes of Health. The impact of the Human Genome Project on science and society will be substantial as significant achievements become frequent occurrences. New physical mapping strategies have allowed our national laboratories and university grantees to move ahead in a timely manner, and development of innovative approaches to determining the base sequence of chromosomes is proceeding at an encouraging rate. Our computational capabilities are improving. New networking workstations and methods of inputting and analyzing mapping and sequencing data are being developed to allow investigators easy access to data from major databanks. Investigations are under way into the ethical, legal, and social implications of the use of data generated by this program. Program management needs, such as project coordination and the desire to create an environment in which the program's investigators could interact, formed the basis for this workshop. The 1991 workshop had many stimulating presentations, and numerous collaborative efforts have developed, but we anticipate that its successor, scheduled for the all of 1992, will provide additional concepts, strategies, and technologies that are not yet imagined and that are based on multidisciplinary interactions. This document provides the abstracts of all talks and poster sessions.

  14. Analysis of non-fatal and fatal injury rates for mine operator and contractor employees and the influence of work location

    SciTech Connect (OSTI)

    Karra, V.K. [NIOSH, Pittsburgh, PA (United States). Pittsburgh Research Laboratory

    2005-07-01T23:59:59.000Z

    Mining injury surveillance data are used as the basis for assessing the severity of injuries among operator and contractor employees in the underground and surface mining of various minerals. Injury rates during 1983-2002 derived from Mine Safety and Health Administration (MSHA) database are analyzed using the negative binomial regression model. The logarithmic mean injury rate is expressed as a linear function of seven indicator variables representing Non-Coal Contractor, Metal Operator, Non Metal Operator, Stone Operator, Sand and Gravel Operator, Coal Contractor, and Work Location, and a continuous variable, RelYear, representing the relative year starting, with 1983 as the base year. Based on the model, the mean injury rate declined at a 1.69% annual rate, and the mean injury rate for work on the Surface is 52.53% lower compared to the title for work in the underground. With reference to the Coal Operator mean injury rate: the Non-Coal Contractor rate is 30.34% lower, the Metal Operator rate is 27.18% lower, the Non-Metal Operator rate is 37.51% lower, the Stone Operator rate is 23.44% lower, the Sand and Gravel Operator rate is 16.45% lower, and the Coal Contractor rate is 1.41% lower. Fatality rates during the same 20 year period are analyzed similarly using Poisson regression model. Based on this model, the mean fatality rate declined at a 3.17% annual rate, and the rate for work on the surface is 64.3% lower compared to the rate for work in the underground. With reference to the Coal Operator mean fatality rate: the Non-Coal Coil tractor rate is 234.81% higher, the Metal Operator rate is 5.79% lower, the Non-Metal Operator rate is 47.36% lower, the Stone Operator rate is 8.29% higher, the Sand and Gravel Operator rate is 60.32% higher, and the Coal Contractor rate is 129.54% higher.

  15. Thermomechanical fatigue behavior of three CFCC`s. Final contractor report

    SciTech Connect (OSTI)

    Worthem, D.W.

    1995-03-01T23:59:59.000Z

    The thermomechanical fatigue (TMF) behavior of three continuous-fiber ceramic composites (CFCC`s) was examined. The three matrices consisted of two different glass-ceramics and silicon carbide, respectively. The matrices of some of the specimens with the silicon carbide matrix were enhanced to improve oxidation resistance. All three were reinforced with Nicalon fibers with various fiber architectures. The thermoelastic properties of the matrix relative to the fibers, the elastic moduli and coefficients of thermal expansion (CTE), were different in each composite, providing a comparison of the effects of these critical properties. The specimens were tested under in-phase (IP) and out-of-phase (OP) cyclic loadings with respect to thermal cycling between 600 C and 1100 C. One of the glass-ceramic composites had greatly increased TMF lives compared to the other glass-ceramic matrix composites. This was probably caused by the reversal of the CTE mismatch between the fibers and the matrices and caused by the different oxidation resistances of the composites. For the same TMF lives a cross-ply reinforced composite had a maximum cyclic stress half as great, as that of unidirectionally reinforced composite. This indicated that the (0 deg) ply fibers had a strong influence of TMF life. Both the glass ceramic matrix composites had shallow-slope stress-life plots that indicated sensitivity to damage and therefore low damage tolerance. The composites with an unenhanced silicon carbide matrix experienced the shortest TMF lives of all the CFCC`s tested. However, the enhanced composite had the longest. Also, the enhanced composite demonstrated the best damage tolerance as evidenced by a stress-life curve that curves sharply upward to the left. In all the composites, out-of-phase cyclic loading was worse than in-phase cyclic loadings despite the CTE mismatch between fiber and matrix.

  16. Major prime contractors have developed a plan to address Hanford Beryllium exposure and are continuing to improve the Chronic Beryllium Disease Prevention Plan (CBDPP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9November 6,Bradbury

  17. Charles "Chuck" Farrar to receive DeMichele Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Farrar to receive DeMichele Award Charles "Chuck" Farrar to receive DeMichele Award The award is presented for demonstrated "exemplary service and support of promoting the science...

  18. High-Efficiency Receivers for Supercritical Carbon Dioxide Cycles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Receivers for Supercritical Carbon Dioxide Cycles - FY12 Q4 High-Efficiency Receivers for Supercritical Carbon Dioxide Cycles - FY12 Q4 This document summarizes the progress of...

  19. STEAM RECEIVER MODELS FOR SOLAR DISH CONCENTRATORS: TWO MODELS COMPARED

    E-Print Network [OSTI]

    response of a parabolic dish steam cavity receiver. Both approaches are based on a heat transfer model

  20. NEJC Board Member Receives 2015 National Planning Excellence Award

    Broader source: Energy.gov [DOE]

    National Environmental Justice Conference, Inc. Board of Directors Member Receives American Planning Association 2015 National Planning Excellence Award

  1. Compilation of Bioassay Issues Reported During the 120-Day Suspension of PAAA Enforcement Actions Related to Internal Dose Evaluation Programs by Contractors in the Department of Energy Complex

    Broader source: Energy.gov [DOE]

    The DOE Office of Enforcement and Investigation (EH Enforcement) invoked a 120-day suspension of PAAA enforcement actions for issues associated with contractor Internal Dose Evaluation Programs (IDEP). Prior to initiation of the suspension, EH Enforcement had identified deficiencies in DOEcontractor implemented bioassay programs at numerous sites within the DOE complex. The commonality of the IDEP deficiencies at the various sites, as well as the possibility of the existence of similar deficiencies at other DOE sites, led EH Enforcement to the conclusion that a suspension of enforcement actions would be appropriate to provide DOE-contractors an opportunity to review their own IDEPs to determine whether similar or other program deficiencies existed, and, if so, to take appropriate corrective action.

  2. Estimation of Convection Loss from Paraboloidal Dish Cavity Receivers

    E-Print Network [OSTI]

    In general, cavity receivers employed in the sun-tracking paraboloidal dish concentrator are subjected the numerical investigation of natural and combined convection loss from cavity receivers employed in solar is a significant source of energy loss from thermal receivers used with dish solar concentrators. This paper

  3. Improving stove evaluation using survey data: Who received which intervention matters

    E-Print Network [OSTI]

    Silver, Whendee

    air pollution Biomass fuel Coal Stoves Health Matching China As biomass fuel use in developing preferred tests with controls suggest health benefits from clean-fuel versus traditional-biomass stoves health risks associated with the use of biomass for energy such as the burning of wood, dung and crop

  4. Portland Company to Receive $1.3 Million to Improve Hydro Power

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSAR - T enAmount for IndividualEnergy PoliticalTechnologies |

  5. Portland Company to Receive $1.3 Million to Improve Hydro Power

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHA Administrative Judgea.Work PlanNEPA/309 Reviewers

  6. Corps Improvement 

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01T23:59:59.000Z

    in the Upper Trinity River Basin was mainly from findings in a Corps environmental impact statement (EIS) report in the 1980s, according to Gene Rice, Corps project manager of the Dallas Floodway and Dallas Floodway Extension projects, two of the Trinity River... to mitigate environmental impacts of the proj- ect. The Corps? Fort Worth District and the City of Dallas are using an innovative approach to return floodplain value to the Trinity River, while improving flood damage reduction. Big Fossil Creek Watershed...

  7. Recovery Act: Hydroelectric Facility Improvement Project - Replacement of Current Mechanical Seal System with Rope Packing System

    SciTech Connect (OSTI)

    Stephens, Jessica D.

    2013-05-29T23:59:59.000Z

    On January 27, 2010 the City of North Little Rock, Arkansas received notification of the awarding of a Department of Energy (DOE) grant totaling $450,000 in funding from the American Recovery and Reinvestment Act (ARRA) under the Project Title: Recovery Act: Hydroelectric Facility Improvement Project – Automated Intake Clearing Equipment and Materials Management. The purpose of the grant was for improvements to be made at the City’s hydroelectric generating facility located on the Arkansas River. Improvements were to be made through the installation of an intake maintenance device (IMD) and the purchase of a large capacity wood grinder. The wood grinder was purchased in order to receive the tree limbs, tree trunks, and other organic debris that collects at the intake of the plant during high flow. The wood grinder eliminates the periodic burning of the waste material that is cleared from the intake and reduces any additional air pollution to the area. The resulting organic mulch has been made available to the public at no charge. Design discussion and planning began immediately and the wood grinder was purchased in July of 2010 and immediately put to work mulching debris that was gathered regularly from the intake of the facility. The mulch is currently available to the public for free. A large majority of the design process was spent in discussion with the Corps of Engineers to obtain approval for drawings, documents, and permits that were required in order to make changes to the structure of the powerhouse. In April of 2011, the City’s Project Engineer, who had overseen the application, resigned and left the City’s employ. A new Systems Mechanical Engineer was hired and tasked with overseeing the project. The transfer of responsibility led to a re-examination of the original assumptions and research upon which the grant proposal was based. At that point, the project went under review and a trip was booked for July 2011 to visit facilities that currently had an IMD installed. This further study of facilities revealed that the implementation of the project as originally described, while proving the benefits described in the original grant application, would likely intensify sand intake. Increased sand intake would lead to an increase in required shutdowns for maintenance and more rapid depreciation of key equipment which would result in a loss of generation capacity. A better solution to the problem, one that continued to meet the criteria for the original grant and ARRA standards, was developed. A supporting day trip was planned to visit other facilities located on the Arkansas River to determine how they were coping with the same strong amounts of sand, silt, and debris. Upon returning from the trip to other Arkansas River facilities it was extremely clear what direction to go in order to most efficiently address the issue of generator capacity and efficiency. Of the plants visited on the Arkansas River, every one of them was running what is called a rope packing shaft sealing system as opposed to mechanical shaft seals, which the facility was running. Rope packing is a time proven sealing method that has been around for centuries. It has proved to perform very well in dirty water situations just like that of the Arkansas River. In April of 2012 a scope change proposal was submitted to the DOE for approval. In August of 2012 the City received word that the change of scope had been approved. Plans were immediately set in motion to begin the conversion from mechanical seals to a packing box at the facility. Contractors arrived on October 1st, 2012 and the project team began unwatering the unit for disassembly. The seal conversion was completed on February 29th, 2013 with start-up of the unit. Further testing and adjusting was done throughout the first two weeks of March.

  8. Solar receiver heliostat reflector having a linear drive and position information system

    DOE Patents [OSTI]

    Horton, Richard H. (Schenectady, NY)

    1980-01-01T23:59:59.000Z

    A heliostat for a solar receiver system comprises an improved drive and control system for the heliostat reflector assembly. The heliostat reflector assembly is controllably driven in a predetermined way by a light-weight drive system so as to be angularly adjustable in both elevation and azimuth to track the sun and efficiently continuously reflect the sun's rays to a focal zone, i.e., heat receiver, which forms part of a solar energy utilization system, such as a solar energy fueled electrical power generation system. The improved drive system includes linear stepping motors which comprise low weight, low cost, electronic pulse driven components. One embodiment comprises linear stepping motors controlled by a programmed, electronic microprocessor. Another embodiment comprises a tape driven system controlled by a position control magnetic tape.

  9. Heat Transfer Analysis and Modeling of a Parabolic Trough Solar Receiver Implemented in Engineering Equation Solver

    SciTech Connect (OSTI)

    Forristall, R.

    2003-10-01T23:59:59.000Z

    This report describes the development, validation, and use of a heat transfer model implemented in Engineering Equation Solver. The model determines the performance of a parabolic trough solar collector's linear receiver, also called a heat collector element. All heat transfer and thermodynamic equations, optical properties, and parameters used in the model are discussed. The modeling assumptions and limitations are also discussed, along with recommendations for model improvement.

  10. Sodium reflux pool-boiler solar receiver on-sun test results

    SciTech Connect (OSTI)

    Andraka, C E; Moreno, J B; Diver, R B; Moss, T A [Oak Ridge National Lab., TN (United States)] [Oak Ridge National Lab., TN (United States)

    1992-06-01T23:59:59.000Z

    The efficient operation of a Stirling engine requires the application of a high heat flux to the relatively small area occupied by the heater head tubes. Previous attempts to couple solar energy to Stirling engines generally involved directly illuminating the heater head tubes with concentrated sunlight. In this study, operation of a 75-kW{sub t} sodium reflux pool-boiler solar receiver has been demonstrated and its performance characterized on Sandia's nominal 75-kW{sub t} parabolic-dish concentrator, using a cold-water gas-gap calorimeter to simulate Stirling engine operation. The pool boiler (and more generally liquid-metal reflux receivers) supplies heat to the engine in the form of latent heat released from condensation of the metal vapor on the heater head tubes. The advantages of the pool boiler include uniform tube temperature, leading to longer life and higher temperature available to the engine, and decoupling of the design of the solar absorber from the engine heater head. The two-phase system allows high input thermal flux, reducing the receiver size and losses, therefore improving system efficiency. The receiver thermal efficiency was about 90% when operated at full power and 800{degree}C. Stable sodium boiling was promoted by the addition of 35 equally spaced artificial cavities in the wetted absorber surface. High incipient boiling superheats following cloud transients were suppressed passively by the addition of small amounts of xenon gas to the receiver volume. Stable boiling without excessive incipient boiling superheats was observed under all operating conditions. The receiver developed a leak during performance evaluation, terminating the testing after accumulating about 50 hours on sun. The receiver design is reported here along with test results including transient operations, steady-state performance evaluation, operation at various temperatures, infrared thermography, x-ray studies of the boiling behavior, and a postmortem analysis.

  11. Concentrating Solar Power �¢���� Central Receiver Panel Component Fabrication and Testing FINAL REPORT

    SciTech Connect (OSTI)

    McDowell, Michael W [Pratt & Whitney Rocketdyne; Miner, Kris [Pratt & Whitney Rocketdyne

    2013-03-30T23:59:59.000Z

    The objective of this project is to complete a design of an advanced concentrated solar panel and demonstrate the manufacturability of key components. Then confirm the operation of the key components under prototypic solar flux conditions. This work is an important step in reducing the levelized cost of energy (LCOE) from a central receiver solar power plant. The key technical risk to building larger power towers is building the larger receiver systems. Therefore, this proposed technology project includes the design of an advanced molten salt prototypic sub-scale receiver panel that can be utilized into a large receiver system. Then complete the fabrication and testing of key components of the receive design that will be used to validate the design. This project shall have a significant impact on solar thermal power plant design. Receiver panels of suitable size for utility scale plants are a key element to a solar power tower plant. Many subtle and complex manufacturing processes are involved in producing a reliable, robust receiver panel. Given the substantial size difference between receiver panels manufactured in the past and those needed for large plant designs, the manufacture and demonstration on prototype receiver panel components with representative features of a full-sized panel will be important to improving the build process for commercial success. Given the thermal flux limitations of the test facility, the panel components cannot be rendered full size. Significance changes occurred in the projects technical strategies from project initiation to the accomplishments described herein. The initial strategy was to define cost improvements for the receiver, design and build a scale prototype receiver and test, on sun, with a molten salt heat transport system. DOE had committed to constructing a molten salt heat transport loop to support receiver testing at the top of the NSTTF tower. Because of funding constraints this did not happen. A subsequent plan to test scale prototype receiver, off sun but at temperature, at a molten salt loop at ground level adjacent to the tower also had to be abandoned. Thus, no test facility existed for a molten salt receiver test. As a result, PWR completed the prototype receiver design and then fabricated key components for testing instead of fabricating the complete prototype receiver. A number of innovative design ideas have been developed. Key features of the receiver panel have been identified. This evaluation includes input from Solar 2, personal experience of people working on these programs and meetings with Sandia. Key components of the receiver design and key processes used to fabricate a receiver have been selected for further evaluation. The Test Plan, Concentrated Solar Power Receiver In Cooperation with the Department of Energy and Sandia National Laboratory was written to define the scope of the testing to be completed as well as to provide details related to the hardware, instrumentation, and data acquisition. The document contains a list of test objectives, a test matrix, and an associated test box showing the operating points to be tested. Test Objectives: 1. Demonstrate low-cost manufacturability 2. Demonstrate robustness of two different tube base materials 3. Collect temperature data during on sun operation 4. Demonstrate long term repeated daily operation of heat shields 5. Complete pinhole tube weld repairs 6. Anchor thermal models This report discusses the tests performed, the results, and implications for design improvements and LCOE reduction.

  12. Corps Improvement

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01T23:59:59.000Z

    tx H 2 O | pg. 6 O ne of the key federal players in the restoration of the Trinity River Basin is the U.S. Army Corps of Engineers, whose primary civil mission is developing and managing the nation?s water resources, including projects to reduce... flood damage; improve navigation channels and harbors; protect wetlands; and preserve, safeguard and enhance the environment. The Corps has been involved in the Trinity River Basin for more than 50 years, but the impetus for the current projects...

  13. Air drilling operations improved by percussion-bit/hammer-tool tandem

    SciTech Connect (OSTI)

    Whiteley, M.C.; England, W.P.

    1986-10-01T23:59:59.000Z

    Contractors and operators air drill whenever possible to improve rate of penetration (ROP). This is done with pneumatic hammer tools (HT's) and various bit types used with standard rotary air rigs. The recent application of a ''flat-bottomed'' percussion bit (FPB) combined with a custom-designed HT originally developed for mining operations has significantly improved air drilling operations in the Arkoma basin. The improvements include a large increase in ROP, improved hole geometry, reduced drillstring stresses, and a substantial reduction in cost per foot. This paper describes (1) a discussion of the engineering design and operation of the FPB/HT tandem, (2) applications and limitations of the tools, (3) guidelines for optimization of performance, and (4) documentation of field performance on Arkoma basin wells to demonstrate the improvements in air drilling operations.

  14. Waste Minimization Improvements Achieved Through Six Sigma Analysis Result In Significant Cost Savings

    SciTech Connect (OSTI)

    Mousseau, Jeffrey, D.; Jansen, John, R.; Janke, David, H.; Plowman, Catherine, M.

    2003-02-26T23:59:59.000Z

    Improved waste minimization practices at the Department of Energy's (DOE) Idaho National Engineering and Environmental Laboratory (INEEL) are leading to a 15% reduction in the generation of hazardous and radioactive waste. Bechtel, BWXT Idaho, LLC (BBWI), the prime management and operations contractor at the INEEL, applied the Six Sigma improvement process to the INEEL Waste Minimization Program to review existing processes and define opportunities for improvement. Our Six Sigma analysis team: composed of an executive champion, process owner, a black belt and yellow belt, and technical and business team members used this statistical based process approach to analyze work processes and produced ten recommendations for improvement. Recommendations ranged from waste generator financial accountability for newly generated waste to enhanced employee recognition programs for waste minimization efforts. These improvements have now been implemented to reduce waste generation rates and are producing positive results.

  15. NREL Announces Two New Competitiveness Improvement Project Awards...

    Energy Savers [EERE]

    Improvement Project (CIP) awards. Northern Power Systems of Barre, Vermont, and Urban Green Energy of New York City, New York, will receive a portion of the 1.27 million...

  16. Tri-Lateral Noor al Salaam High Concentration Solar Central Receiver Program

    SciTech Connect (OSTI)

    Blackmon, James B

    2008-03-31T23:59:59.000Z

    This report documents the efforts conducted primarily under the Noor al Salaam (“Light of Peace”) program under DOE GRANT NUMBER DE-FC36-02GO12030, together with relevant technical results from a closely related technology development effort, the U.S./Israel Science and Technology Foundation (USISTF) High Concentration Solar Central Receiver program. These efforts involved preliminary design, development, and test of selected prototype power production subsystems and documentation of an initial version of the system definition for a high concentration solar hybrid/gas electrical power plant to be built in Zaafarana, Egypt as a first step in planned commercialization. A major part of the planned work was halted in 2007 with an amendment in October 2007 requiring that we complete the technical effort by December 31, 2007 and provide a final report to DOE within the following 90 days. This document summarizes the work conducted. The USISTF program was a 50/50 cost-shared program supported by the Department of Commerce through the U.S./Israel Science and Technology Commission (USISTC). The USISTC was cooperatively developed by President Clinton and the late Prime Minister Rabin of Israel "to encourage technological collaboration" and "support peace in the Middle East through economic development". The program was conducted as a follow-on effort to Israel's Magnet/CONSOLAR Program, which was an advanced development effort to design, fabricate, and test a solar central receiver and secondary optics for a "beam down" central receiver concept. The status of these hardware development programs is reviewed, since they form the basis for the Noor al Salaam program. Descriptions are provided of the integrated system and the major subsystems, including the heliostat, the high temperature air receiver, the power conversion unit, tower and tower reflector, compound parabolic concentrator, and the master control system. One objective of the USISTF program was to conduct marketing research, identify opportunities for use of this technology, and to the extent possible, secure an agreement leading to a pre-commercialization demonstration or prototype plant. This was accomplished with the agreement to conduct the Noor al Salaam program as a tri-lateral project between Egypt, Israel, and the U.S. The tri-lateral project was led by the University of Alabama in Huntsville (UAH); this included the Egyptian New and Renewable Energy Authority and the Israeli USISTC participants. This project, known was Noor al Salaam, was funded by the U.S. Agency for International Development (USAID) through the Department of Energy (DOE). The Egyptian activity was under the auspices of the Egyptian Ministry of Energy and Electricity, New and Renewable Energy Authority (NREA) as part of Egypt's plans for renewable energy development. The objective of the Noor al Salaam project was to develop the conditions necessary to obtain funding and construct and operate an approximately 10 to 20 Megawatt hybrid solar/natural gas demonstration power plant in Zaafarana, Egypt that could serve both as a test bed for advanced solar technology evaluations, and as a forerunner to commercial plant designs. This plant, termed Noor Al Salaam, or “Light of Peace”, reached the initial phase of system definition before being curtailed, in part by changes in USAID objectives, coupled with various delays that were beyond the scope of the program to resolve. The background of the USISTF technology development and pre-commercialization effort is provided in this report, together with documentation of the technology developments conducted under the Noor al Salaam program. It should be noted that only a relatively small part of the Noor al Salaam funding was expended over the approximately five years for which UAH was prime contractor before the program was ordered closed (Reference 1) so that the remaining funds could be returned to USAID.

  17. Improved aethalometer

    DOE Patents [OSTI]

    Hansen, A.D.

    1988-01-25T23:59:59.000Z

    An improved aethalometer having a single light source and a single light detector and two light paths from the light source to the light detector. A quartz fiber filter is inserted in the device, the filter having a collection area in one light path and a reference area in the other light path. A gas flow path through the aethalometer housing allows ambient air to flow through the collection area of the filter so that aerosol particles can be collected on the filter. A rotating disk with an opening therethrough allows light for the light source to pass alternately through the two light paths. The voltage output of the detector is applied to a VCO and the VCO pulses for light transmission separately through the two light paths, are counted and compared to determine the absorption coefficient of the collected aerosol particles. 5 figs.

  18. Selecting Mold Remediation Contractors

    E-Print Network [OSTI]

    Renchie, Don L.

    2005-10-05T23:59:59.000Z

    Texas has strict regulations that govern mold remediation companies. Before contracting for mold remediation work, consumers should know what the law requires of remediation companies and what such contracts should contain....

  19. Contractor Past Performance Information

    Office of Environmental Management (EM)

    module why it is important, how it impacts the acquisition and grants communities, as well as how the system interrelates with other systems containing similar Information. FAI...

  20. ( A ) Acting ( C ) Contractor

    E-Print Network [OSTI]

    Ohta, Shigemi

    FOR CONSTRUCTION E. Johnson DEPUTY FOR SCIENCE Q. Shen (I) CHIEF OPERATING OFFICER D. Hatton CONOPS MANAGER L. Hill

  1. ( A ) Acting ( C ) Contractor

    E-Print Network [OSTI]

    Ohta, Shigemi

    FOR PROGRAMS E. Johnson CHIEF OPERATING OFFICER D. Hatton CONOPS MANAGER L. Hill (M) AUTHORIZATION BASIS

  2. CONTRACTOR PURCHASING SYSTEM REVIEWS

    Office of Environmental Management (EM)

    PURCHASING SYSTEM REVIEWS RISK ASSESSMENT MATRIX RISK CATEGORY PERFORMANCE SCHEDULE COST HIGH (3) --Performance data casts significant doubt on the ability of the system or...

  3. Contractor Past Performance Information

    Office of Environmental Management (EM)

    volume increases. Ensuring that Department of Energy (DOE) cost savings and cost avoidance data from strategic sourcing activities are recorded correctly. Applicable...

  4. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract Awarded toTABLE OF6

  5. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract Awarded toTABLE

  6. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract Awarded

  7. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract Awarded

  8. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract Awarded

  9. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract AwardedMarch 2013)

  10. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract AwardedMarch

  11. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract AwardedMarch

  12. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor FederalEnergy Contract AwardedMarch

  13. DOE CONTRACTOR PENSION PLANS

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,Office of Policy, OAPM | DepartmentIOffshoreDepartmentBegins Demoltion on01-13

  14. CONTRACTOR PURCHASING SYSTEM REVIEWS

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. Department ofJune 2,The BigSidingState6Report,COMMENTS ONPRGM NAME PRGM OFC

  15. Hanford Contractors - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHallNot Logged In You|

  16. RAMP Contractors Enforcement Letter

    Energy Savers [EERE]

    Corporation Sandia National Laboratories P.O. Box 5800, MS 0101 Albuquerque, New Mexico 87185-0101 Dr. Raymond J. Juzaitis, President National Security Technologies, LLC...

  17. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergyOak7.2 (June 2013)

  18. Contractor Past Performance Information

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergyOak7.2 (June 2013)5) 1

  19. Contractor Assurance System

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And Bylaws |ContactFlowDecember01 SF-30156 Assurance

  20. RAMP Contractors Enforcement Letter

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHASeptember 2010In addition to 1 |D I S P U T E S & I1, 2014 Mr.

  1. Radio frequency circuits for wireless receiver front-ends

    E-Print Network [OSTI]

    Xin, Chunyu

    2005-11-01T23:59:59.000Z

    . . . . . . . . 69 2. Implementation of the Down-Conversion Mixer . . . . 69 3. Layout Considerations and Simulation Results . . . . 74 4. Experimental Results of the Mixer Within the Receiver 77 IV BLUETOOTH/WI-FI DUAL-STANDARD RECEIVER RF FRONT...-END : : : : : : : : : : : : : : : : : : : : : : : : : : : : 80 A. Direct Conversion Bluetooth/Wi-Fi Dual-Standard Receiver 81 B. RF Front-End Design Considerations . . . . . . . . . . . . 83 C. Circuits Implementations . . . . . . . . . . . . . . . . . . . 86 1. LNA Implementation...

  2. ORISE: ORAU receives DOE Small Business Award for work under...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ORAU receives DOE Small Business Award for work under ORISE contract Pictured above (L-R) are Heidi Timmerman, director of Procurement and Contracts Administration; Rebecca Crowe,...

  3. DOE's Jefferson Lab Receives Approval To Start Construction of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE's Jefferson Lab Receives Approval To Start Construction of 310 Million Upgrade NEWPORT NEWS, Va., Sept. 15, 2008 - The U.S. Department of Energy's Thomas Jefferson National...

  4. "BEST training, related to science, that I have ever received"

    E-Print Network [OSTI]

    Minnesota, University of

    "BEST training, related to science, that I have ever received" - Quote from a Dragonfly Workshop digital nature photography to state education standards ­ A technology training certificate to submit

  5. Two Los Alamos National Laboratory organizations receive Performance...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory organizations receive Performance Excellence recognition from Quality New Mexico Nuclear Material Control and Accountability Group and the Quality and Performance...

  6. Seventy-three New Mexico students receive Los Alamos Employees...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Employees' Scholarship Fund (LAESF). Fasano is one of 73 students from seven Northern New Mexico counties receiving LAESF scholarships, which are funded through pledges from Los...

  7. High-Efficiency Receivers for Supercritical Carbon Dioxide Cycles

    Broader source: Energy.gov (indexed) [DOE]

    application to demonstrate the full receiver system performance * Absorber architecture defined capable of (a) withstanding cycle pressures and (b) maintaining acceptable...

  8. A HIGH TEMPERATURE GAS RECEIVER UTILIZING SMALL PARTICLES

    E-Print Network [OSTI]

    Hunt, Arlon

    2012-01-01T23:59:59.000Z

    organized by the Solar Thermal Test Facilities UsersMexico, Organized by the Solar Thermal Test Facilities Usersdevelop a new type of solar thermal receiver that utilizes a

  9. Sandia Energy - JBEI Research Receives Strong Industry Interest...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Receives Strong Industry Interest in DOE Technology Transfer Call Home Renewable Energy Energy Biofuels Facilities Partnership JBEI News News & Events Research &...

  10. Y-12 Steam Plant Project Received National Recognition for Project...

    National Nuclear Security Administration (NNSA)

    Steam Plant Project Received National Recognition for Project Management Excellence | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission...

  11. allograft recipients receiving: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HOW YOUR FINANCIAL NEED WAS DETERMINED The Financial Aid Notice Students receiving University funding will have a financial aid notice Budget Your basic cost of attendance...

  12. Support and maneuvering apparatus for solar energy receivers

    DOE Patents [OSTI]

    Murphy, Lawrence M. (Littleton, CO)

    1989-01-01T23:59:59.000Z

    A support and maneuvering apparatus is disclosed for a solar energy receiving device adpated for receiving and concentrating solar energy and having a central axis extending through the center thereof. The apparatus includes a frame for mounting the perimeter of said solar energy receiving device. A support member extends along the central axis of the receiving device and has a base end passing through the center of the receiving device and an outer distal end adapted for carrying a solar energy receiving and conversion mechanism. A variable tension mechanism interconnects the support member with the frame to provide stiffening for the support member and the frame and to assist in the alignment of the frame to optimize the optical efficiency of the solar energy receiving device. A rotatable base is provided, and connecting members extend from the base for pivotable attachment to the frame at spaced positions therealong. Finally, an elevation assembly is connected to the receiving device for selectively pivoting the receiving device about an axis defined between the attachment positions of the connecting members on the frame.

  13. absorption solar receiver: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    which exhibit a broadband absorption enhancement over 2 An Air-Based Cavity-Receiver for Solar Trough Concentrators Roman Bader Renewable Energy Websites Summary: for a heat...

  14. Support and maneuvering apparatus for solar energy receivers

    DOE Patents [OSTI]

    Murphy, L.M.

    1988-07-28T23:59:59.000Z

    A support and maneuvering apparatus is disclosed for a solar energy receiving device adapted for receiving and concentrating solar energy and having a central axis extending through the center thereof. The apparatus includes a frame for mounting the perimeter of said solar energy receiving device. A support member extends along the central axis of the receiving device and has a base end passing through the center of the receiving device and an outer distal end adapted for carrying a solar energy receiving and conversion mechanism. A variable tension mechanism interconnects the support member with the frame to provide stiffening for the support member and the frame and to assist in the alignment of the frame to optimize the optical efficiency of the solar energy receiving device. A rotatable base is provided, and connecting members extend from the base for pivotable attachment to the frame at spaced positions therealong. Finally, an elevation assembly is connected to the receiving device for selectively pivoting the receiving about an axis defined between the attachment positions of the connecting members on the frame. 4 figs.

  15. Drell receives National Medal of Science | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Drell receives National Medal of Science | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  16. Optimization of Multiple Receivers Solar Power Tower systems

    E-Print Network [OSTI]

    Emilio Carrizosa

    2015-03-26T23:59:59.000Z

    Mar 26, 2015 ... Abstract: In this article a new procedure to optimize the design of a Multiple Receivers Solar Power Tower system is presented. The proposed ...

  17. Curran receives SAE Foundation industry leadership award | ornl...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at the Department of Energy's Oak Ridge National Laboratory, has received the Society for Automotive Engineers (SAE) Foundation's 2015 Stefan Pischinger Young Industry Leadership...

  18. Analysis and design of CMOS ultra wideband receivers

    E-Print Network [OSTI]

    Ranjan, Mahim

    2006-01-01T23:59:59.000Z

    C. Direct Conversion Receiver . . . . . . . . . . D.second-order distortion issues in direct conversion MB- OFDMapproximation. III.1 III.2 III.3 A typical direct conversion

  19. SoftCast: One Video to Serve All Wireless Receivers

    E-Print Network [OSTI]

    Katabi, Dina

    2009-02-07T23:59:59.000Z

    The main challenge in wireless video multicast is to scalably serve multiple receivers who have different channel characteristics. Current wireless transmission schemes, however, cannot support smooth degradation. Specifically, ...

  20. Waste receiving and processing facility module 1 auditable safetyanalysis

    SciTech Connect (OSTI)

    Bottenus, R.J.

    1997-02-01T23:59:59.000Z

    The Waste Receiving and Processing Facility Module 1 Auditable Safety Analysis analyzes postulated accidents and determines controls to prevent the accidents or mitigate the consequences.

  1. Advanced Low-Cost Receivers for Parabolic Troughs

    Broader source: Energy.gov (indexed) [DOE]

    receivers. Some of these drawbacks include expensive and technologically intensive absorption coatings, a 1%-5% annual failure rate for tubes due to vacuum degradation, and...

  2. Department of Energy Receives 2013 Partners in Conservation Award...

    Broader source: Energy.gov (indexed) [DOE]

    The Department of Energy (DOE), along with its partners the Bureau of Ocean Energy Management (BOEM) and the National Oceanic and Atmospheric Administration (NOAA), received the...

  3. Pool boiler reflux solar receiver for Stirling dish-electric systems

    SciTech Connect (OSTI)

    Andraka, C.E.; Moreno, J.B.

    1989-01-01T23:59:59.000Z

    The feasibility of competitive, modular bulk electric power from the sun may be greatly enhanced by the use of a reflux heat pipe receiver to combine a heat engine such as Stirling with a paraboloidal dish concentrator. This combination represents a potential improvement over previous successful demonstrations of dish-electric technology in terms of enhanced performance, lower cost, longer life, and greater flexibility in engine design. There are, however, important issues and unknowns which must be addressed to determine engineering feasibility of these devices. In the pool boiler reflux receiver, concentrated solar radiation causes liquid metal (sodium or potassium) to boil. The vapor flows to the engine heater heads, where it condenses and releases the latent heat. The condensate is returned to the receiver absorber pool by gravity (refluxing). This is essentially an adaptation of heat pipe technology to the peculiar requirements of concentrated solar flux, and provides many advantages over conventional heated tube receiver technology. Boiling theory indicates that long-term stable boiling of liquid metal may be difficult to achieve. Laboratory scale experiments have been performed. Initial tests confirmed that boiling is unstable in a baseline boiler. Boiling stability was established after the addition of ''artificial cavities'' to the heated surface, and successful boiling of sodium was demonstrated for 100 hours. Other stabilizing influences may have been present, and will be discussed. The flux and geometry closely simulated a real receiver. The results of these tests are presented, along with the design of a full scale receiver for on-sun testing and considerations for long term operation. 15 refs., 10 figs.

  4. Near-term improvements in parabolic troughs: an economic and performance assessment

    SciTech Connect (OSTI)

    Gee, R.; Murphy, L.M.

    1981-08-01T23:59:59.000Z

    Improved parabolic-trough concentrating collectors will result from better design, improved fabrication techniques, and the development and utilization of improved materials. This analysis qualifies the performance potential of various parabolic-trough component improvements from a systems viewpoint and uses these performance data to determine the worth of each improvement on an economic basis. The improvements considered are evacuated receivers, silvered-glass reflectors, improved receiver, selective coatings, higher optical accuracy concentrations, and higher transmittance receiver glazings. Upper-bound costs for each improvement are provided as well as estimates of the increased solar system rates of return that are made possible by these improvements. The performance and economic potential of some of these improvements are shown to be substantial, especially at higher collector operating temperatures.

  5. Qualification test for the flexible receiver. Revision 2

    SciTech Connect (OSTI)

    Tedeschi, D.J.

    1994-12-12T23:59:59.000Z

    This document provides the test plan and procedures to certify and design verify the 42{double_prime} and 4{double_prime}-6{double_prime} Flexible Receiver as a safety class 3 system. The Flexible Receiver will be used by projects W-151 and W-320 for removing equipment from tanks C-106 and AZ-101.

  6. A New Compact Multichannel Receiver for Underwater Wireless Communication Networks

    E-Print Network [OSTI]

    Abdi, Ali

    size of the proposed receiver makes it particularly useful for small unmanned underwater vehicles1 A New Compact Multichannel Receiver for Underwater Wireless Communication Networks Ali Abdi of the particle velocity, in addition to the pressure, multichannel reception can be accomplished in underwater

  7. Ultra-Low Power Time Synchronization Using Passive Radio Receivers

    E-Print Network [OSTI]

    Amir, Yair

    Ultra-Low Power Time Synchronization Using Passive Radio Receivers Yin Chen Qiang Wang Marcus Chang. In this pa- per, we present an inexpensive and ultra-low power ( of elapsed seconds. The universal time sig- nal receiver combines an off-the-shelf radio chip with an ultra-low

  8. Remote Control and Receiver-Transceiver Specifications and

    E-Print Network [OSTI]

    Rajamani, Sriram K.

    Remote Control and Receiver- Transceiver Specifications and Requirements for Windows Media Center hardware vendors (IHVs) and PC OEM partners who want to create remote control and receiver device combinations that decode input from the remote control for Windows Media Center. This document provides details

  9. Interference mitigation techniques for SAW-less CDMA receivers

    E-Print Network [OSTI]

    Khatri, Himanshu

    2009-01-01T23:59:59.000Z

    RF front-end IC for a direct-conversion wireless receiver,”noise for low- power direct-conversion receiver,” IEEE J.A 72-mW CMOS 802.11a direct conversion front-end with 3.5-dB

  10. Artificial Intersymbol Interference (ISI) to Exploit Receiver Imperfections for Secrecy

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Artificial Intersymbol Interference (ISI) to Exploit Receiver Imperfections for Secrecy Azadeh intentional intersymbol inter- ference (ISI). The legitimate receiver uses the key to cancel the ISI while the eavesdropper, since it does not have the key, cannot do such. It is shown that although ISI reduces

  11. Waste Receiving and Processing (WRAP) Facility Public Address System Review Findings

    SciTech Connect (OSTI)

    HUMPHRYS, K.L.

    1999-11-03T23:59:59.000Z

    Public address system operation at the Waste Receiving and Processing (WRAP) facility was reviewed. The review was based on an Operational Readiness Review finding that public address performance was not adequate in parts of the WRAP facility. Several improvements were made to the WRAP Public Address (PA) system to correct the deficiencies noted. Speaker gain and position was optimized. A speech processor was installed to boost intelligibility in high noise areas. Additional speakers were added to improve coverage in the work areas. The results of this evaluation indicate that further PA system enhancements are not warranted. Additional speakers cannot compensate for the high background sound and high reverberation levels found in the work areas. Recommendations to improve PA system intelligibility include minor speaker adjustments, enhanced PA announcement techniques, and the use of sound reduction and abatement techniques where economically feasible.

  12. Structural analysis of a reflux pool-boiler solar receiver

    SciTech Connect (OSTI)

    Hoffman, E.L.; Stone, C.M.

    1991-06-01T23:59:59.000Z

    Coupled thermal-structural finite element calculations of a reflux pool-boiler solar receiver were performed to characterize the operating stresses and to address issues affecting the service life of the receiver. Analyses performed using shell elements provided information for receiver material selection and design optimization. Calculations based on linear elastic fracture mechanics principles were performed using continuum elements to assess the vulnerability of a seam-weld to fatigue crack growth. All calculations were performed using ABAQUS, a general purpose finite element code, and elements specifically formulated for coupled thermal-structural analysis. Two materials were evaluated: 316L SS and Haynes 230 alloys. The receiver response was simulated for a combination of structural and thermal loads that represent the startup and operating conditions of the receiver. For both materials, maximum stresses in the receiver developed shortly after startup due to uneven temperature distribution across the receiver surface. The largest effective stress was near yield in the 316L SS receiver and below 39 percent of yield in the Haynes 230 receiver. The calculations demonstrated that stress reductions of over 25 percent could be obtained by reducing the aft dome thickness to one closer to the absorber. The fatigue calculations demonstrated that the stress distribution near the seam-weld notch depends primarily on the structural load created by internal pressurization of the receiver rather than the thermal, indicating that the thermal loads can be neglected when assessing the stress intensity near the seam-weld notch. The stress intensity factor, computed using the J-integral method and crack opening-displacement field equations, was significantly below the fatigue threshold for most steels. The calculations indicated that the weld notch was always loaded in compression, a condition which is not conducive to fatigue crack growth. 15 refs., 30 figs., 3 tabs.

  13. A universal low-noise analog receiver baseband in 65-nm CMOS

    E-Print Network [OSTI]

    Tekin, Ahmet; Elwan, Hassan; Pedrotti, Kenneth

    2010-01-01T23:59:59.000Z

    P. , et al. (2005). A direct- conversion receiver for DVB-analog design for direct conversion receiver. In Proceedingsof the wide-band direct conversion receiver including the

  14. Trends in dish-Stirling solar receiver designs

    SciTech Connect (OSTI)

    Diver, R.B.; Andraka, C.E.; Moreno, J.B.; Adkins, D.R.; Moss, T.A.

    1990-01-01T23:59:59.000Z

    The dish-Stirling solar energy system, because of its high efficiency, is a leading candidate for producing low-cost electric power from the sun. Dish-Stirling receiver design involves dealing with non-uniform and highly concentrated solar flux at high temperatures (700--800{degree}C) and, therefore, presents a variety of technical challenges. The technology is in the process of evolving from directly illuminated heater-head tube receivers'' to receivers that use refluxing (i.e., gravity assisted) liquid metals as an intermediate heat transfer fluid. Modern dish-Stirling development was initiated in the late 1970s by the Jet Propulsion Laboratory for the Department of Energy. The JPL technology development with United Stirling, Inc. involved the USAB 4.95 Stirling engine and directly illuminated heater-head tube receivers. This work eventually led to the successful demonstrations and world record efficiencies by Advanco Corp., and to the attempted commercialization of the technology by McDonnell Douglas Corp. The severe nature of concentrated solar flux and the potential advantages of heat-pipe technology have caused an evolution toward reflux'' receivers. These receivers are just beginning to be tested in the laboratory and integrated with dish-Stirling systems. In this paper, the history and current status of dish-Stirling receiver development are presented and discussed. The technical challenges to be addressed by the dish-Stirling community and the future plans at Sandia are outlined. 52 refs., 9 figs.

  15. Improving School Governance | 1 Improving School Governance

    E-Print Network [OSTI]

    Rambaut, Andrew

    Improving School Governance | 1 Improving School Governance A Recommended Code of Governance for Schools: A flexible framework for strategic planning October 2012 Pilot version 1 #12;Improving School Governance | 2 #12;Improving School Governance | 3 This pilot version of the Recommended Code of Governance

  16. Recent Improvements In Interface Management For Hanfords Waste Treatment And Immobilization Plant - 13263

    SciTech Connect (OSTI)

    Arm, Stuart T. [Washington River Protection Solutions, Richland, WA (United States); Pell, Michael J. [Bechtel National, Inc., Richland, WA (United States); Van Meighem, Jeffery S. [Washington River Protection Solutions, Richland, WA (United States); Duncan, Garth M. [Bechtel National, Inc., Richland, WA (United States); Harrington, Christopher C. [Department of Energy, Office of River Protection, Richland, Washington (United States)

    2012-11-20T23:59:59.000Z

    The U.S. Department of Energy (DOE), Office of River Protection (ORP) is responsible for management and completion of the River Protection Project (RPP) mission, which comprises both the Hanford Site tank farms operations and the Waste Treatment and Immobilization Plant (WTP). The RPP mission is to store, retrieve and treat Hanford's tank waste; store and dispose of treated wastes; and close the tank farm waste management areas and treatment facilities by 2047. The WTP is currently being designed and constructed by Bechtel National Inc. (BNI) for DOE-ORP. BNI relies on a number oftechnical services from other Hanford contractors for WTP's construction and commissioning. These same services will be required of the future WTP operations contractor. The WTP interface management process has recently been improved through changes in organization and technical issue management documented in an Interface Management Plan. Ten of the thirteen active WTP Interface Control Documents (ICDs) have been revised in 2012 using the improved process with the remaining three in progress. The value of the process improvements is reflected by the ability to issue these documents on schedule.

  17. Applications Received by DOE/FE to Export Domestically Produced...

    Broader source: Energy.gov (indexed) [DOE]

    Applications Received by DOEFE to Export Domestically Produced LNG from the Lower-48 States (as of March 5, 2014) All Changes Since February 11, 2014 Update Are In Red 1 Company...

  18. Long Term Applications Received by DOE/FE to Export

    Energy Savers [EERE]

    Long Term Applications Received by DOEFE to Export Domestically Produced LNG from the Lower-48 States (as of March 3, 2015) All Changes Since February 25, 2015 Update Are In Red 1...

  19. Long Term*** Applications Received by DOE/FE to Export

    Broader source: Energy.gov (indexed) [DOE]

    Long Term*** Applications Received by DOEFE to Export Domestically Produced LNG from the Lower-48 States (as of June 11, 2014) All Changes Since April 18, 2014 Update Are In Red 1...

  20. Advanced Low-Cost Receivers for Parabolic Troughs (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01T23:59:59.000Z

    Norwich Technologies is one of the 2012 SunShot CSP R&D awardees for their advanced receivers. This fact sheet explains the motivation, description, and impact of the project.

  1. High-Temperature Falling-Particle Receiver (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01T23:59:59.000Z

    Sandia National Laboratories is one of the 2012 SunShot CSP R&D awardee for their advanced receivers. This fact sheet explains the motivation, description, and impact of the project.

  2. Argonne and Dept. of Energy receive EPA's Federal Green Challenge...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne and Dept. of Energy receive EPA's Federal Green Challenge Award May 15, 2014 Tweet EmailPrint Argonne National Laboratory and the U.S. Department of Energy (DOE) have been...

  3. Energy-Department Supported Scientist Receives Nobel Prize for...

    Office of Environmental Management (EM)

    to receive the Nobel Prize in Physics for their invention of the blue light emitting diode, a game-changer in the history of LED lights. | Photo courtesy of Soraa. Shuji...

  4. Argonne receives 2014 DOE Sustainability Award | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    receives 2014 DOE Sustainability Award By Diana Anderson * January 5, 2015 Tweet EmailPrint Argonne National Laboratory has been recognized with the 2014 U.S. Department of Energy...

  5. High-Efficiency Receivers for Supercritical Carbon Dioxide Cycles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    high-efficiency solar receiver that is compatible with s-CO2 cycles and modern thermal storage subsystems. Supercritical CO2 Brayton-cycle engines have the potential to...

  6. High performance CMOS integrated circuits for optical receivers

    E-Print Network [OSTI]

    SamadiBoroujeni, MohammadReza

    2009-05-15T23:59:59.000Z

    Prasad Enjeti Head of Department, Costas Georghiades December 2006 Major Subject: Electrical Engineering iii ABSTRACT High Performance CMOS Integrated Circuits for Optical Receivers. (December 2006) MohammadReza SamadiBoroujeni, B...

  7. apprentice receives award: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19th of March. The L'Oral- UNESCO For Women in Science Awards, established by the world Takada, Shoji 11 Prof. T. Harinarayana, Director, GERMI received the "Energy and...

  8. Receiving Water Uses, Impairments, and Sources of Stormwater Pollutants

    E-Print Network [OSTI]

    Pitt, Robert E.

    CHAPTER 2 Receiving Water Uses, Impairments, and Sources of Stormwater Pollutants "Bathing) .........................................................................26 Recreation (Non-Water Contact) Uses...................................................................................26 Biological Uses (Warm-Water Fishery, Aquatic Life Use, Biological Integrity, etc.)..........27

  9. High-Flux Microchannel Solar Receiver (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01T23:59:59.000Z

    Oregon State University is one of the 2012 SunShot CSP R&D awardees for their advanced receivers. This fact sheet explains the motivation, description, and impact of the project.

  10. RF CMOS UWB transmitter and receiver front-end design

    E-Print Network [OSTI]

    Miao, Meng

    2009-05-15T23:59:59.000Z

    The low-cost low-power complementary metal-oxide semiconductor (CMOS) ultra wideband (UWB) transmitter and receiver front-ends based on impulse technology were developed. The CMOS UWB pulse generator with frequency-band tuning capability...

  11. Long Term Applications Received by DOE/FE to Export

    Broader source: Energy.gov (indexed) [DOE]

    Term Applications Received by DOEFE to Export Domestically Produced LNG from the Lower-48 States (as of April 14, 2015) All Changes Since March 26, 2015 Update Are In Red Company...

  12. Advanced Low-Cost Receivers for Parabolic Troughs

    Broader source: Energy.gov (indexed) [DOE]

    Trough Receiver (NRELTP-550-45633): NREL, 2009. 2. Kutscher C, et al. Line-Focus Solar Power Plant Cost Reduction Plan: NREL Milestone Report, 2010. 3. Mahoney R. Trough...

  13. Particle Receiver Integrated with Fluidized Bed (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01T23:59:59.000Z

    National Renewable Energy Laboratory is one of the 2012 SunShot CSP R&D awardees for their advanced receivers. This fact sheet explains the motivation, description, and impact of the project.

  14. DESIGN OF A MICROCHANNEL BASED SOLAR RECEIVER/REACTOR FOR

    E-Print Network [OSTI]

    Apte, Sourabh V.

    for production of hydrogen. A cou- pled shape-constrained optimization and Monte-Carlo radiative heat transfer model is developed to design a receiver shape that can yield a desired heat flux distribution

  15. Multi-band OFDM UWB receiver with narrowband interference suppression 

    E-Print Network [OSTI]

    Kelleci, Burak

    2009-05-15T23:59:59.000Z

    A multi band orthogonal frequency division multiplexing (MB-OFDM) compatible ultra wideband (UWB) receiver with narrowband interference (NBI) suppression capability is presented. The average transmit power of UWB system ...

  16. A HIGH TEMPERATURE GAS RECEIVER UTILIZING SMALL PARTICLES

    E-Print Network [OSTI]

    Hunt, Arlon

    2012-01-01T23:59:59.000Z

    of Energy under Arlon Hunt, "A New Solar Thermal Receiversolar thermal receiver that utilizes a dispersion of very small particles susŁe2ded in a gas to absorb the radiant energy

  17. Administering truncated receive functions in a parallel messaging interface

    DOE Patents [OSTI]

    Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

    2014-12-09T23:59:59.000Z

    Administering truncated receive functions in a parallel messaging interface (`PMI`) of a parallel computer comprising a plurality of compute nodes coupled for data communications through the PMI and through a data communications network, including: sending, through the PMI on a source compute node, a quantity of data from the source compute node to a destination compute node; specifying, by an application on the destination compute node, a portion of the quantity of data to be received by the application on the destination compute node and a portion of the quantity of data to be discarded; receiving, by the PMI on the destination compute node, all of the quantity of data; providing, by the PMI on the destination compute node to the application on the destination compute node, only the portion of the quantity of data to be received by the application; and discarding, by the PMI on the destination compute node, the portion of the quantity of data to be discarded.

  18. Improving maintenance operation through transformational outsourcing

    E-Print Network [OSTI]

    Ye, Jacqueline Ming-Shih

    2007-01-01T23:59:59.000Z

    Outsourcing maintenance to third-party contractors has become an increasingly popular option for manufacturers to achieve tactical and/or strategic objectives. Though simple in concept, maintenance outsourcing is difficult ...

  19. Hybrid solar central receiver for combined cycle power plant

    DOE Patents [OSTI]

    Bharathan, Desikan (Lakewood, CO); Bohn, Mark S. (Golden, CO); Williams, Thomas A. (Arvada, CO)

    1995-01-01T23:59:59.000Z

    A hybrid combined cycle power plant including a solar central receiver for receiving solar radiation and converting it to thermal energy. The power plant includes a molten salt heat transfer medium for transferring the thermal energy to an air heater. The air heater uses the thermal energy to preheat the air from the compressor of the gas cycle. The exhaust gases from the gas cycle are directed to a steam turbine for additional energy production.

  20. Hybrid solar central receiver for combined cycle power plant

    DOE Patents [OSTI]

    Bharathan, D.; Bohn, M.S.; Williams, T.A.

    1995-05-23T23:59:59.000Z

    A hybrid combined cycle power plant is described including a solar central receiver for receiving solar radiation and converting it to thermal energy. The power plant includes a molten salt heat transfer medium for transferring the thermal energy to an air heater. The air heater uses the thermal energy to preheat the air from the compressor of the gas cycle. The exhaust gases from the gas cycle are directed to a steam turbine for additional energy production. 1 figure.

  1. A Digital-Receiver for the Murchison Widefield Array

    E-Print Network [OSTI]

    Prabu, Thiagaraj; Roshi, D Anish; Kamini, P A; Madhavi, S; Emrich, David; Crosse, Brian; Williams, Andrew J; Waterson, Mark; Deshpande, Avinash A; Shankar, N Udaya; Subrahmanyan, Ravi; Briggs, Frank H; Goeke, Robert F; Tingay, Steven J; Johnston-Hollitt, Melanie; R, Gopalakrishna M; Morgan, Edward H; Pathikulangara, Joseph; Bunton, John D; Hampson, Grant; Williams, Christopher; Ord, Stephen M; Wayth, Randall B; Kumar, Deepak; Morales, Miguel F; deSouza, Ludi; Kratzenberg, Eric; Pallot, D; McWhirter, Russell; Hazelton, Bryna J; Arcus, Wayne; Barnes, David G; Bernardi, Gianni; Booler, T; Bowman, Judd D; Cappallo, Roger J; Corey, Brian E; Greenhill, Lincoln J; Herne, David; Hewitt, Jacqueline N; Kaplan, David L; Kasper, Justin C; Kincaid, Barton B; Koenig, Ronald; Lonsdale, Colin J; Lynch, Mervyn J; Mitchell, Daniel A; Oberoi, Divya; Remillard, Ronald A; Rogers, Alan E; Salah, Joseph E; Sault, Robert J; Stevens, Jamie B; Tremblay, S E; Webster, Rachel L; Whitney, Alan R; Wyithe, Stuart B

    2015-01-01T23:59:59.000Z

    An FPGA-based digital-receiver has been developed for a low-frequency imaging radio interferometer, the Murchison Widefield Array (MWA). The MWA, located at the Murchison Radio-astronomy Observatory (MRO) in Western Australia, consists of 128 dual-polarized aperture-array elements (tiles) operating between 80 and 300\\,MHz, with a total processed bandwidth of 30.72 MHz for each polarization. Radio-frequency signals from the tiles are amplified and band limited using analog signal conditioning units; sampled and channelized by digital-receivers. The signals from eight tiles are processed by a single digital-receiver, thus requiring 16 digital-receivers for the MWA. The main function of the digital-receivers is to digitize the broad-band signals from each tile, channelize them to form the sky-band, and transport it through optical fibers to a centrally located correlator for further processing. The digital-receiver firmware also implements functions to measure the signal power, perform power equalization across ...

  2. Dr. Robert A. Stokes is an alumnus of our department, having received his

    E-Print Network [OSTI]

    MacAdam, Keith

    with the Boeing Company on a DARPA project to develop a revolutionary SOFC electricity storage unit that enables-1995, he was Deputy Director of the National Renewable Energy Laboratory (NREL), and was responsible of the Midwest Research Institute, the operating contractor for NREL. Prior to his work at NREL, Dr. Stokes

  3. NEVADA SPARKS RESIDENTS TO IMPROVE ENERGY FITNESS | Department...

    Broader source: Energy.gov (indexed) [DOE]

    each region helped the program offer consistent opportunities and maintain equally high standards for quality assurance, contractor recruitment, training, and marketing. Read...

  4. Evaluation of the US Department of Energy's occupational safety and health program for its government-owned contractor-operated facilities

    SciTech Connect (OSTI)

    Not Available

    1990-12-01T23:59:59.000Z

    An evaluation of the Department of Energy's (DOE) occupational safety and health programs for its government-owned contractor-operated (GOCO) activities was completed by the Department of Labor's Occupational Safety and Health Administration (OSHA) in response to DOE's request for assistance. The purpose of the evaluation was to provide DOE with a blueprint for strengthening these programs. Under the leadership of Secretary of Energy James Watkins, DOE has launched a number of significant initiatives designed to instill a new culture of safety and health accountability within the Department. The Secretary of Energy's personal concern for safety and health was not being reflected in the priorities, resource allocation decisions and planning of DOE and GOCO managers. The report recommends that DOE consider major organizational changes, changes in priorities, and the development of operationally meaningful safety and health goals and objectives together with the accountability systems necessary to measure progress.

  5. Evaluation of the US Department of Energy's occupational safety and health program for its government-owned contractor-operated facilities

    SciTech Connect (OSTI)

    Not Available

    1990-12-01T23:59:59.000Z

    The purpose of this report is to present to Secretary of Energy James Watkins the findings and recommendations of the Occupational Safety and Health Administration's (OSHA) evaluation of the Department of Energy's (DOE) programs for worker safety and health at DOE's government-owned contractor-operated (GOCO) nuclear facilities. The OSHA evaluation is based on an intensive and comprehensive review and analysis of DOE's worker safety and health programs including: written programs; safety and health inspection programs; and the adequacy of resource, training, and management controls. The evaluation began on April 10, 1990 and involved over three staff years before its conclusion. The evaluation was initiated by former Secretary of Labor Elizabeth Dole in response to Secretary of Energy James Watkins' request that OSHA assist him in determining the actions needed to assure that DOE has an exemplary safety and health program in place at its GOCOs. 6 figs.

  6. Turbo Receiver Design for Phase Noise Mitigation in OFDM Systems

    E-Print Network [OSTI]

    Sridharan, Gokul

    2010-01-01T23:59:59.000Z

    This paper addresses the issue of phase noise in OFDM systems. Phase noise (PHN) is a transceiver impairment resulting from the non-idealities of the local oscillator. We present a case for designing a turbo receiver for systems corrupted by phase noise by taking a closer look at the effects of the common phase error (CPE). Using an approximate probabilistic framework called variational inference (VI), we develop a soft-in soft-out (SISO) algorithm that generates posterior bit-level soft estimates while taking into account the effect of phase noise. The algorithm also provides an estimate of the phase noise sequence. Using this SISO algorithm, a turbo receiver is designed by passing soft information between the SISO detector and an outer forward error correcting (FEC) decoder that uses a soft decoding algorithm. It is shown that the turbo receiver achieves close to optimal performance.

  7. Testing of Stirling engine solar reflux heat-pipe receivers

    SciTech Connect (OSTI)

    Rawlinson, S.; Cordeiro, P.; Dudley, V.; Moss, T.

    1993-07-01T23:59:59.000Z

    Alkali metal heat-pipe receivers have been identified as a desirable interface to couple a Stirling-cycle engine with a parabolic dish solar concentrator. The reflux receiver provides power nearly isothermally to the engine heater heads while de-coupling the heater head design from the solar absorber surface design. The independent design of the receiver and engine heater head leads to high system efficiency. Heat pipe reflux receivers have been demonstrated at approximately 30 kW{sub t} power throughput by others. This size is suitable fm engine output powers up to 10 kW{sub e}. Several 25-kW{sub e}, Stirling-cycle engines exist, as well as designs for 75-kW{sub t} parabolic dish solar concentrators. The extension of heat pipe technology from 30 kW{sub t} to 75 kW{sub t} is not trivial. Heat pipe designs are pushed to their limits, and it is critical to understand the flux profiles expected from the dish, and the local performance of the wick structure. Sandia has developed instrumentation to monitor and control the operation of heat pipe reflux receivers to test their throughput limits, and analytical models to evaluate receiver designs. In the past 1.5 years, several heat pipe receivers have been tested on Sandia`s test bed concentrators (TBC`s) and 60-kW{sub t} solar furnace. A screen-wick heat pipe developed by Dynatherm was tested to 27.5 kW{sub t} throughput. A Cummins Power Generation (CPG)/Thermacore 30-kW{sub t} heat pipe was pushed to a throughput of 41 kW{sub t} to verify design models. A Sandia-design screen-wick and artery 75-kW{sub t} heat pipe and a CPG/Thermacore 75-kW{sub t} sintered-wick heat pipe were also limit tested on the TBC. This report reviews the design of these receivers, and compares test results with model predictions.

  8. Advanced Low-Cost Receivers for Parabolic Troughs

    Broader source: Energy.gov [DOE]

    This fact sheet describes an advanced, low-cost receiver project for parabolic troughs, awarded under the DOE's 2012 SunShot Concentrating Solar Power R&D award program. Norwich Technologies is designing a novel receiver that addresses these issues for parabolic trough concentrating solar power systems. This technology represents significant operational and cost advances in the most trusted and broadly implemented form of CSP and provides a viable pathway to achieving SunShot’s $0.06/kWh goal for utility-scale CSP systems.

  9. Factors Influencing the Prices Received for Texas Turkeys.

    E-Print Network [OSTI]

    Halpin, R. B.; Parnell, E. D.; Mountney, G. J.

    1954-01-01T23:59:59.000Z

    1952 300- 'j HENS 250 -Ae THANKSGIVING L 20 27 4 11 18 25 1 8 15 22 29 6 S E PT. OCT. N OV. DEC. i Figure 3. Average number of No. 1 live turkeys pu:. chased per transaction by sex by weeks, six plants, Texci 1951-52. I FALL MARKETING SEASON...Factors Influencing the Prices Received for Texas Turkeys TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS. DIRECTOR, COLLEGE STATION. TEXAS DIGEST A study was conducted during 1950-53 of the factors influencing the market quality a1 received...

  10. U.S. Department of Labor The purpose of the discussion below is to advise contractors which are subject to the Walsh-Healey Public Contracts Act or the Service Contract

    E-Print Network [OSTI]

    Fraden, Seth

    are subject to the Walsh-Healey Public Contracts Act or the Service Contract Act of the principal provisions are liable for violations of the act committed by their covered secondary contractors. Service Contract Act General Provisions -- The Service Contract Act applies to every contract entered into by the United States

  11. Notice of Intent to Revise DOE O 350.2B, Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-03-20T23:59:59.000Z

    The objective of this revision is to incorporate a more performance based risk management approach into the oversight and management of these assignments. The revision will result in a reduction of DOE requirements, increased delegation of management responsibilities to sponsoring program organizations, elimination of reporting requirements and institutionalizing DOE-wide cost constraints for contractor domestic assignments. Approved 3-20-15.

  12. Notice of Intent to Revise DOE O 350.2B, Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    The objective of this revision is to incorporate a more performance based risk management approach into the oversight and management of these assignments. The revision will result in a reduction of DOE requirements, increased delegation of management responsibilities to sponsoring program organizations, elimination of reporting requirements and institutionalizing DOE-wide cost constraints for contractor domestic assignments. Approved 3-20-15.

  13. Occupational dose reduction at Department of Energy contractor facilities: Bibliography of selected readings in radiation protection and ALARA

    SciTech Connect (OSTI)

    Dionne, B.J.; Sullivan, S.G.; Baum, J.W.

    1993-12-01T23:59:59.000Z

    This bibliography contains abstracts relating to various aspects of ALARA program implementation and dose reduction activities, with a focus on DOE facilities. Abstracts included in this bibliography were selected from proceedings of technical meetings, journals, research reports, searches of the DOE Energy, Science and Technology Database (in general, the citation and abstract information is presented as obtained from this database), and reprints of published articles provided by the authors. Facility types and activities covered in the scope of this report include: radioactive waste, uranium enrichment, fuel fabrication, spent fuel storage and reprocessing, facility decommissioning, hot laboratories, tritium production, research, test and production reactors, weapons fabrication and testing, fusion, uranium and plutonium processing, radiography, and aocelerators. Information on improved shielding design, decontamination, containments, robotics, source prevention and control, job planning, improved operational and design techniques, as well as on other topics, has been included. In addition, DOE/EH reports not included in previous volumes of the bibliography are in this volume (abstracts 611 to 684). This volume (Volume 5 of the series) contains 217 abstracts. An author index and a subject index are provided to facilitate use. Both indices contain the abstract numbers from previous volumes, as well as the current volume. Information that the reader feels might be included in the next volume of this bibliography should be submitted to the BNL ALARA Center.

  14. Recent Improvements in Interface Management for Hanford's Waste Treatment and Immobilization Plant - 13263

    SciTech Connect (OSTI)

    Arm, Stuart T.; Van Meighem, Jeffery S. [Washington River Protection Solutions, P.O. Box 850, Richland, Washington, 99352 (United States)] [Washington River Protection Solutions, P.O. Box 850, Richland, Washington, 99352 (United States); Duncan, Garth M.; Pell, Michael J. [Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352 (United States)] [Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352 (United States); Harrington, Christopher C. [Department of Energy - Office of River Protection, 2440 Stevens Center Place, Richland, Washington, 99352 (United States)] [Department of Energy - Office of River Protection, 2440 Stevens Center Place, Richland, Washington, 99352 (United States)

    2013-07-01T23:59:59.000Z

    The U.S. Department of Energy (DOE), Office of River Protection (ORP) is responsible for management and completion of the River Protection Project (RPP) mission, which includes the Hanford Site tank farms operations and the Waste Treatment and Immobilization Plant (WTP). The RPP mission is to store, retrieve and treat Hanford's tank waste; store and dispose of treated wastes; and close the tank farm waste management areas and treatment facilities by 2047. The WTP is currently being designed and constructed by Bechtel National Inc. (BNI) for DOE-ORP. BNI relies on a number of technical services from other Hanford contractors for WTP's construction and commissioning. These same services will be required of the future WTP operations contractor. Partly in response to a DNFSB recommendation, the WTP interface management process managing these technical services has recently been improved through changes in organization and issue management. The changes are documented in an Interface Management Plan. The organizational improvement is embodied in the One System Integrated Project Team that was formed by integrating WTP and tank farms staff representing interfacing functional areas into a single organization. A number of improvements were made to the issue management process but most notable was the formal appointment of technical, regulatory and safety subject matter experts to ensure accurate identification of issues and open items. Ten of the thirteen active WTP Interface Control Documents have been revised in 2012 using the improved process with the remaining three in progress. The value of the process improvements is reflected by the ability to issue these documents on schedule and accurately identify technical, regulatory and safety issues and open items. (authors)

  15. Power generation considerations in a solar biomodal receiver

    SciTech Connect (OSTI)

    Rochow, R.F. [NovaTech, Lynchburg, VA (United States); Miles, B.J. [Babcock and Wilcox, Lynchburg, VA (United States)

    1996-12-31T23:59:59.000Z

    The Integrated Solar Upper Stage (ISUS), or solar bimodal stage provides both propulsive thrust for efficient orbital transfer(s) and electrical power generation for the spacecraft. The combined propulsive and power systems allow the solar bimodal system to effectively compete for a variety of missions. Once on station, thermionic converters are used to supply continuous electrical power to the satellite, even during periods when the spacecraft is in the Earth`s shadow. The key to continuous power supply is thermal energy storage. The ISUS propulsion system also benefits through the use of thermal storage. By utilizing a graphite receiver, large amounts of sensible heat can be stored for later power generation. Waste heat is radiated to space through the use of heat pipes. Clearly, the graphite mass must be minimized without sacrificing electrical power capability. Voltage and current characteristics are carefully designed to operate within acceptable ranges. The detailed design of the receiver/absorber/converter (RAC) power system must meet these requirements with as little impact to the remainder of the bimodal system as possible. This paper addresses the key design considerations of a solar bimodal receiver as a power plant. Factors including the thermal storage and heat transfer from the graphite receiver to the thermionic converters, the support structures, electrical insulation and converter string design will be discussed.

  16. Received 25 March 2002 Accepted 6 August 2002

    E-Print Network [OSTI]

    Received 25 March 2002 Accepted 6 August 2002 Published online 9 December 2002 Nuclear markers reveal unexpected genetic variation and a Congolese­Nilotic origin of the Lake Victoria cichlid species flock Ole Seehausen1,2* , Egbert Koetsier2 , Maria Victoria Schneider2 , Lauren J. Chapman3,4 , Colin A

  17. BLIND RECEIVERS FOR MISO COMMUNICATION SYSTEMS USING A NONLINEAR PRECODER

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    BLIND RECEIVERS FOR MISO COMMUNICATION SYSTEMS USING A NONLINEAR PRECODER Alain Y. Kibangou GIPSA.Kibangou@ujf-grenoble.fr ABSTRACT In this paper, we propose two blind decoding approaches for multi-input single-output (MISO of simulations. 1. INTRODUCTION Multi-input Single Output (MISO) communication channel modelling occurs when

  18. MODELLING OF CAVITY RECEIVER HEAT TRANSFER COMPACT LINEAR FRESNEL REFLECTOR

    E-Print Network [OSTI]

    . This approach allows an affordable entry into renewable energy for existing coal-power producers, and allows them to meet the mandatory renewable energy targets set by the government of New South Wales . (Hu et) linear absorbers, achieving higher ground area efficiency. · Receiver is an inverted, trapezoidal, linear

  19. DESIGN OF THE TRANSCONDUCTANCE AMPLIFIER FOR FREQUENCY DOMAIN SAMPLING RECEIVER

    E-Print Network [OSTI]

    Chen, XI

    2010-01-16T23:59:59.000Z

    -1. Introduction and motivation of the high resolution & high sampling rate ADC ........................................................................ 27 3-2. Specifications of the Gm stage ..................................................... 28... 3-3. Circuit design of the Gm stage ...................................................... 29 IV A DIFFERENTIAL NOISE CANCELLING LOW NOISE TRANSCONDUCTANCE AMPLIFIER FOR DRIVING THE FD RF COMMUNICATION RECEIVER...

  20. Received 11 January 2002 Accepted 1 March 2002

    E-Print Network [OSTI]

    Pratt, Stephen

    Received 11 January 2002 Accepted 1 March 2002 Published online 29 May 2002 Deciding on a new home, Bristol BS8 1UG, UK 5 Section of Neurobiology and Behavior, Cornell University, Ithaca, NY 14853, USA nectar sources, ants stub- bornly wasting energy on longer routes--can be adaptive in the long term

  1. Shipping and Receiving Dangerous Goods at Georgia Tech

    E-Print Network [OSTI]

    Shipping and Receiving Dangerous Goods at Georgia Tech Contacts: Biological Shipments: Shane://industry.gatech.edu/researchers/forms) GENERAL: The transportation of dangerous goods is regulated by a number of national and international of Dangerous Goods (Flash). PROCESS: 1) All shipments must have a Document Id number as well as a People

  2. top 3 winners receive one of the following

    E-Print Network [OSTI]

    Rock, Chris

    top 3 winners receive one of the following: · iPad® · GoPro® Camera · Mountain Bike TOP 20 AT THE COMMONS FOR THE REMAINDER OF THE SEMESTER! TOP THAT AT TEXAS TECH! Sauce It, Stack It, Slice It. Any Way Pizza Contest TOP THAT! CREATIVE PIZZA CONTEST ENTRY FORM JUDGING CRITERIA: Among all qualified entries

  3. Organizational Science Doctoral Student Receives NCA Honor By Lynn Roberson

    E-Print Network [OSTI]

    Kelly, Scott David

    Organizational Science Doctoral Student Receives NCA Honor By Lynn Roberson Communications Director College of Liberal Arts & Sciences UNC Charlotte Organizational Science Ph.D. student David Askay has Dr. Steven Rogelberg, director of organizational science at UNC Charlotte. "His research holds great

  4. A Wideband OOK Receiver for Wireless Capsule Yanping Zhou# 1

    E-Print Network [OSTI]

    Nam, Sangwook

    . The storage capacitor of the envelope detector is optimized to obtain good sensitivity and high data rate receiver has simple structure, it can be implemented with a small chip size. Traditional super- heterodyne) and demodulator. Usually off-chip resistors and capacitors are necessary for the loop filter in the PLL. The OOK

  5. Electrical and Computer Engineering Professor Sanjay Krishna Receives Awards

    E-Print Network [OSTI]

    New Mexico, University of

    Electrical and Computer Engineering Professor Sanjay Krishna Receives Awards April 1, 2013 and regents' lecturer will be presented with the Young Scientist Award for 2013 from the International Symposium of Compound Semiconductors in May at their meeting in Kobe, Japan. The award, which

  6. Received 9 June 2004 Accepted 25 June 2004

    E-Print Network [OSTI]

    Davies, Jonathan

    dependent on solar energy input. Previous work demonstrated a sig- nificant correlation between the generalReceived 9 June 2004 Accepted 25 June 2004 Published online 24 September 2004 Environmental energy Biology, Imperial College London, Silwood Park Campus, Ascot SL5 7PY, UK 2 Molecular Systematics Section

  7. DOE Announces First Companies to Receive Industrial Energy Efficiency...

    Energy Savers [EERE]

    is accredited by the American National Standards Institute (ANSI) and will serve as a roadmap for industrial facilities to help continually improve their efficiency and maintain...

  8. Alaska Native Tribes Receive Technical Assistance for Local Clean...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    asked to participate in the START program. Community improvements from energy to housing, health care, education, or any other community need must first come from an engaged...

  9. Mary Ann Fresco receives OPM award for creating, fostering inclusive...

    National Nuclear Security Administration (NNSA)

    allowed her to gain government-wide knowledge on how to effectively change organizational cultures, to improve workforce morale with progressive management practices, and...

  10. Occupational dose reduction at Department of Energy contractor facilities: Bibliography of selected readings in radiation protection and ALARA; Volume 5

    SciTech Connect (OSTI)

    Dionne, B.J.; Sullivan, S.G.; Baum, J.W. [Brookhaven National Lab., Upton, NY (United States)

    1994-01-01T23:59:59.000Z

    Promoting the exchange of information related to implementation of the As Low as Reasonably Achievable (ALARA) philosophy is a continuing objective for the Department of Energy (DOE). This report was prepared by the Brookhaven National Laboratory (BNL) ALARA Center for the DOE Office of Health. It contains the fifth in a series of bibliographies on dose reduction at DOE facilities. The BNL ALARA Center was originally established in 1983 under the sponsorship of the Nuclear Regulatory Commission to monitor dose-reduction research and ALARA activities at nuclear power plants. This effort was expanded in 1988 by the DOE`s Office of Environment, Safety and Health, to include DOE nuclear facilities. This bibliography contains abstracts relating to various aspects of ALARA program implementation and dose-reduction activities, with a specific focus on DOE facilities. Abstracts included in this bibliography were selected from proceedings of technical meetings, journals, research reports, searches of the DOE Energy, Science and Technology Database (in general, the citation and abstract information is presented as obtained from this database), and reprints of published articles provided by the authors. Facility types and activities covered in the scope of this report include: radioactive waste, uranium enrichment, fuel fabrication, spent fuel storage and reprocessing, facility decommissioning, hot laboratories, tritium production, research, test and production reactors, weapons fabrication and testing, fusion, uranium and plutonium processing, radiography, and accelerators. Information on improved shielding design, decontamination, containments, robotics, source prevention and control, job planning, improved operational and design techniques, as well as on other topics, has been included. In addition, DOE/EH reports not included in previous volumes of the bibliography are in this volume (abstracts 611 to 684). This volume (Volume 5 of the series) contains 217 abstracts.

  11. A Randomized Controlled Trial of Lorazepam to Reduce Liver Motion in Patients Receiving Upper Abdominal Radiation Therapy

    SciTech Connect (OSTI)

    Tsang, Derek S.; Voncken, Francine E.M.; Tse, Regina V. [Princess Margaret Cancer Centre, University Health Network, Department of Radiation Oncology, University of Toronto, Toronto (Canada); Sykes, Jenna [Department of Biostatistics, Princess Margaret Cancer Centre, University Health Network, Toronto (Canada); Wong, Rebecca K.S.; Dinniwell, Rob E.; Kim, John; Ringash, Jolie; Brierley, James D.; Cummings, Bernard J.; Brade, Anthony [Princess Margaret Cancer Centre, University Health Network, Department of Radiation Oncology, University of Toronto, Toronto (Canada); Dawson, Laura A., E-mail: laura.dawson@rmp.uhn.on.ca [Princess Margaret Cancer Centre, University Health Network, Department of Radiation Oncology, University of Toronto, Toronto (Canada)

    2013-12-01T23:59:59.000Z

    Purpose: Reduction of respiratory motion is desirable to reduce the volume of normal tissues irradiated, to improve concordance of planned and delivered doses, and to improve image guided radiation therapy (IGRT). We hypothesized that pretreatment lorazepam would lead to a measurable reduction of liver motion. Methods and Materials: Thirty-three patients receiving upper abdominal IGRT were recruited to a double-blinded randomized controlled crossover trial. Patients were randomized to 1 of 2 study arms: arm 1 received lorazepam 2 mg by mouth on day 1, followed by placebo 4 to 8 days later; arm 2 received placebo on day 1, followed by lorazepam 4 to 8 days later. After tablet ingestion and daily radiation therapy, amplitude of liver motion was measured on both study days. The primary outcomes were reduction in craniocaudal (CC) liver motion using 4-dimensional kV cone beam computed tomography (CBCT) and the proportion of patients with liver motion ?5 mm. Secondary endpoints included motion measured with cine magnetic resonance imaging and kV fluoroscopy. Results: Mean relative and absolute reduction in CC amplitude with lorazepam was 21% and 2.5 mm respectively (95% confidence interval [CI] 1.1-3.9, P=.001), as assessed with CBCT. Reduction in CC amplitude to ?5 mm residual liver motion was seen in 13% (95% CI 1%-25%) of patients receiving lorazepam (vs 10% receiving placebo, P=NS); 65% (95% CI 48%-81%) had reduction in residual CC liver motion to ?10 mm (vs 52% with placebo, P=NS). Patients with large respiratory movement and patients who took lorazepam ?60 minutes before imaging had greater reductions in liver CC motion. Mean reductions in liver CC amplitude on magnetic resonance imaging and fluoroscopy were nonsignificant. Conclusions: Lorazepam reduces liver motion in the CC direction; however, average magnitude of reduction is small, and most patients have residual motion >5 mm.

  12. Providing protection: Agencies receive funding to repair, upgrade dams

    E-Print Network [OSTI]

    Wythe, Kathy

    2009-01-01T23:59:59.000Z

    Story by Kathy Wythe tx H2O | pg. 26 Providing protection Agencies receive funding to repair, upgrade dams along with local partners, can apply for grant funds, he said. Construction of the dams began through four federal authorizations..., called floodwater retarding structures and built mostly in rural areas during the 1950s to 1970s, are aging and need repairing. Others now protect urban areas that have developed downstream and need upgrading to meet more stringent safety standards...

  13. Taxation of oil and gas payments received independent of production

    SciTech Connect (OSTI)

    Fambrough, J.

    1983-06-01T23:59:59.000Z

    Several economic incentives are offered to mineral owners for entering into an oil and gas lease. These are: (1) a bonus; (2) a delay rental; (3) a royalty. This article is intended to aid in the understanding of the tax treatment for these oil and gas payments, received independent of production, in order to avoid any tax penalties and to elucidate a tax-minimization strategy. 11 references, 7 tables. (NLG)

  14. TCAT to Receive Ithaca's First 'Cutting-Edge' Fuel Cell Bus ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Archived News Stories Latest News TCAT to Receive Ithaca's First 'Cutting-Edge' Fuel Cell Bus 2 Cornellians receive Distinguished Scholar Award Versatile polymer film...

  15. Y-12 CIO Travis Howerton Receives 2009 Linton Brooks Medal for...

    National Nuclear Security Administration (NNSA)

    Home Field Offices Welcome to the NNSA Production Office NPO News Releases Y-12 CIO Travis Howerton Receives 2009 Linton ... Y-12 CIO Travis Howerton Receives 2009...

  16. Nanofluid-based receivers for high-temperature, high-flux direct solar collectors

    E-Print Network [OSTI]

    Lenert, Andrej

    2010-01-01T23:59:59.000Z

    Solar power plants with surface receivers have low overall energy conversion efficiencies due to large emissive losses at high temperatures. Alternatively, volumetric receivers promise increased performance because solar ...

  17. Combustion system for hybrid solar fossil fuel receiver

    DOE Patents [OSTI]

    Mehos, Mark S.; Anselmo, Kenneth M.; Moreno, James B.; Andraka, Charles E.; Rawlinson, K. Scott; Corey, John; Bohn, Mark S.

    2004-05-25T23:59:59.000Z

    A combustion system for a hybrid solar receiver comprises a pre-mixer which combines air and fuel to form an air-fuel mixture. The mixture is introduced tangentially into a cooling jacket. A burner plenum is fluidically connected to the cooling jacket such that the burner plenum and the cooling jacket are arranged in thermal contact with one another. The air-fuel mixture flows through the cooling jacket cooling the burner plenum to reduce pre-ignition of the air-fuel mixture in the burner plenum. A combustion chamber is operatively associated with and open to the burner plenum to receive the air-fuel mixture from the burner plenum. An igniter is operatively positioned in the combustion chamber to combust the air-fuel mixture, releasing heat. A recuperator is operatively associated with the burner plenum and the combustion chamber and pre-heats the air-fuel mixture in the burner plenum with heat from the combustion chamber. A heat-exchanger is operatively associated and in thermal contact with the combustion chamber. The heat-exchanger provides heat for the hybrid solar receiver.

  18. Wideband Heterodyne QWIP Receiver Development for Thermonuclear Fusion Measurements

    SciTech Connect (OSTI)

    Bennett, C.A.; Buchanan, M.; Hutchinson, D.P.; Liu, H.C.; Richards, R.K.; Simpson, M.L.

    1998-11-01T23:59:59.000Z

    Oak Ridge National Laboratory (ORNL) has been developing heterodyne receivers for plasma diagnostic applications for over 20 years. One area of this work has been the development of a diagnostic system for the measurement of the energy of alpha particles created in a thermonuclear fusion reactor. These particles originate with an energy of 3.5 MeV and cool to the thermal energy of the plasma (around 15 keV) after several seconds. To measure the velocity distribution of these alpha particles, a Thomson scattering diagnostic is under development based on a high power CO{sub 2} laser at 10 microns with a heterodyne receiver. The Doppler shift generated by Thomson scattering of the alpha particles requires a wideband heterodyne receiver (greater than 10 GHz). Because Mercury-Cadimum-Telluride (MCT) detectors are limited to a bandwidth of approximately 2 GHz, a Quantum Well Infrared Photodetector (QWIP) detector was obtained from the National Research Council of Canada (NRC) and evaluated for its heterodyne performance using the heterodyne testing facility developed at ORNL.

  19. Dr. Douglas G. Horner Receives Research Award Dr. Douglas G. Horner, OD PhD, has received an award to support a new collaborative

    E-Print Network [OSTI]

    Indiana University

    Dr. Douglas G. Horner Receives Research Award Dr. Douglas G. Horner, OD PhD, has received an award. Peabody, OD, of IUSO on, "Developing and Implementing 21st Century Ideas on Optometry through Area Studies

  20. Paul Moore Receives Top Oklahoma Art Awards NORMAN --Paul Moore, University of Oklahoma Artist-In-Residence, will receive a Special Recognition

    E-Print Network [OSTI]

    Oklahoma, University of

    Paul Moore Receives Top Oklahoma Art Awards NORMAN -- Paul Moore, University of Oklahoma Artist-In-Residence, will receive a Special Recognition Award Awards Ceremony at the Oklahoma Capitol Nov. 13. Moore is currently working

  1. Occurrence reporting and processing system (ORPS) lessons learned: Tools to improve workplace performance

    SciTech Connect (OSTI)

    Commander, S.L.

    1992-01-01T23:59:59.000Z

    Various Department of Energy (DOE) orders require DOE and DOE contractor personnel to review abnormal events to gain lessons learned information. The term event'' is used to mean a real-time occurrence. When reviewing events data, it must be possible to determine what happened and why (including root causes), the impacts, the appropriate corrective actions, and any lessons learned that might be applicable to activities of other operations or contractors. Merely obtaining the information will not prevent occurrence of a similar event; contributing conditions must be corrected. It is important for managers, trainers, and others to learn from the events of others so that they may apply these experiences to their own activities. Reports of events must be analyzed to determine possible applicability to other facilities and/or job functions. Relevant information can then be used to correct defects and improve facilities and operations, thus making them more efficient and safer for all employees. Lessons learned information is particularly helpful in planning employee training and in developing training curriculum and programs. Lessons learned information can be obtained from many sources. It can be found in the Safety Performance Measurement System's Computerized Accident/Incident Reporting System (CAIRS) module, the S H Publications module, the Unusual Occurrence Reports module, and the Office of Nuclear Safety Operating Experience Weekly Summary.'' One important source of lessons teamed information is the Occurrence Reporting and Processing System (ORPS) database, which contains event data from September 1, 1990, to the present. This report discusses this source.

  2. Occurrence reporting and processing system (ORPS) lessons learned: Tools to improve workplace performance

    SciTech Connect (OSTI)

    Commander, S.L.

    1992-12-31T23:59:59.000Z

    Various Department of Energy (DOE) orders require DOE and DOE contractor personnel to review abnormal events to gain lessons learned information. The term ``event`` is used to mean a real-time occurrence. When reviewing events data, it must be possible to determine what happened and why (including root causes), the impacts, the appropriate corrective actions, and any lessons learned that might be applicable to activities of other operations or contractors. Merely obtaining the information will not prevent occurrence of a similar event; contributing conditions must be corrected. It is important for managers, trainers, and others to learn from the events of others so that they may apply these experiences to their own activities. Reports of events must be analyzed to determine possible applicability to other facilities and/or job functions. Relevant information can then be used to correct defects and improve facilities and operations, thus making them more efficient and safer for all employees. Lessons learned information is particularly helpful in planning employee training and in developing training curriculum and programs. Lessons learned information can be obtained from many sources. It can be found in the Safety Performance Measurement System`s Computerized Accident/Incident Reporting System (CAIRS) module, the S&H Publications module, the Unusual Occurrence Reports module, and the Office of Nuclear Safety ``Operating Experience Weekly Summary.`` One important source of lessons teamed information is the Occurrence Reporting and Processing System (ORPS) database, which contains event data from September 1, 1990, to the present. This report discusses this source.

  3. Contractor report to the Department of Energy on opportunities for integration of environmental management activities across the complex (predecisional draft). Revision 1

    SciTech Connect (OSTI)

    NONE

    1997-03-01T23:59:59.000Z

    The US Department of Energy (DOE) Environmental Management (EM) program faces significant technical and financial challenges in cleaning up the environmental legacy of nuclear weapons production and research and development, while facing an uncertain future in obtaining the needed funding to perform this work. Many of these requirements, including State and Federal regulations and negotiated agreements, continue to be a significant contributor to EM program costs and schedules. Historically, the sites have managed their programs focusing on their individual site`s needs. While this approach maximized successes at individual sites, it has resulted in a more costly program than if more integration across the DOE system occurred. In July 1996, the DOE Assistant Secretary for EM, Al Alm, chartered a contractor led effort to perform complex-wide integration in support of the ten-year plan process to develop a suite of technically defensible, integrated alternatives to meet the EM mission. This report documents opportunities for waste and nuclear materials management integration activities in six areas: transuranic (TRU) waste, mixed low-level waste (MLLW), low-level waste (LLW), environmental restoration (ER), high-level waste (HLW), and spent nuclear fuel (SNF). The opportunities represent technically defensible solutions which reduce cost, accelerate schedules, and result in no significant increase in risk.

  4. Oak Ridge Reservation volume I. Y-12 mercury task force files: A guide to record series of the Department of Energy and its contractors

    SciTech Connect (OSTI)

    NONE

    1995-02-17T23:59:59.000Z

    The purpose of this guide is to describe each of the series of records identified in the documents of the Y-12 Mercury Task Force Files that pertain to the use of mercury in the separation and enrichment of lithium isotopes at the Department of Energy`s (DOE) Y-12 Plant in Oak Ridge, Tennessee. History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project, which seeks to verify and conduct inventories of epidemiologic and health-related records at various DOE and DOE contractor sites. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project. Specific attention will be given to the history of the DOE-Oak Ridge Reservation, the development of the Y-12 Plant, and the use of mercury in the production of nuclear weapons during the 1950s and early 1960s. This introduction provides background information on the Y-12 Mercury Task Force Files, an assembly of documents resulting from the 1983 investigation of the Mercury Task Force into the effects of mercury toxicity upon workplace hygiene and worker health, the unaccountable loss of mercury, and the impact of those losses upon the environment. This introduction also explains the methodology used in the selection and inventory of these record series. Other topics include the methodology used to produce this guide, the arrangement of the detailed record series descriptions, and information concerning access to the collection.

  5. Economic Improvement Districts (Indiana)

    Broader source: Energy.gov [DOE]

    A legislative body may adopt an ordinance establishing an economic improvement district and an Economic Improvement Board to manage development in a respective district. The Board can choose to...

  6. Short range micro-power impulse radar with high resolution swept range gate with damped transmit and receive cavities

    DOE Patents [OSTI]

    McEwan, T.E.

    1998-06-30T23:59:59.000Z

    A radar range finder and hidden object locator is based on ultra-wide band radar with a high resolution swept range gate. The device generates an equivalent time amplitude scan with atypical range of 4 inches to 20 feet, and an analog range resolution as limited by a jitter of on the order of 0.01 inches. A differential sampling receiver is employed to effectively eliminate ringing and other aberrations induced in the receiver by the near proximity of the transmit antenna, so a background subtraction is not needed, simplifying the circuitry while improving performance. Uses of the invention include a replacement of ultrasound devices for fluid level sensing, automotive radar, such as cruise control and parking assistance, hidden object location, such as stud and rebar finding. Also, this technology can be used when positioned over a highway lane to collect vehicle count and speed data for traffic control. Techniques are used to reduce clutter in the receive signal, such as decoupling the receive and transmit cavities by placing a space between them, using conductive or radiative damping elements on the cavities, and using terminating plates on the sides of the openings. 20 figs.

  7. Short range micro-power impulse radar with high resolution swept range gate with damped transmit and receive cavities

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1998-01-01T23:59:59.000Z

    A radar range finder and hidden object locator is based on ultra-wide band radar with a high resolution swept range gate. The device generates an equivalent time amplitude scan with atypical range of 4 inches to 20 feet, and an analog range resolution as limited by a jitter of on the order of 0.01 inches. A differential sampling receiver is employed to effectively eliminate ringing and other aberrations induced in the receiver by the near proximity of the transmit antenna, so a background subtraction is not needed, simplifying the circuitry while improving performance. Uses of the invention include a replacement of ultrasound devices for fluid level sensing, automotive radar, such as cruise control and parking assistance, hidden object location, such as stud and rebar finding. Also, this technology can be used when positioned over a highway lane to collect vehicle count and speed data for traffic control. Techniques are used to reduce clutter in the receive signal, such as decoupling the receive and transmit cavities by placing a space between them, using conductive or radiative damping elements on the cavities, and using terminating plates on the sides of the openings.

  8. SONY GXB5005 GPS RECEIVER DATA Without shield can Installed With shield can in place

    E-Print Network [OSTI]

    Berns, Hans-Gerd

    SONY GXB5005 GPS RECEIVER DATA Without shield can Installed With shield can in place (for illustrative purposes only) The Sony GXB5005 GPS receiver is a miniature 12 channel GPS module with support for WAAS/EGNOS augmented positioning. The receiver is based on Sony's CXD2951 single-chip GPS receiver IC

  9. 2090 IEEE TRANSACTIONS ON COMMUNICATIONS, VOL. 57, NO. 7, JULY 2009 Turbo Receivers for

    E-Print Network [OSTI]

    Benoît, Escrig

    2090 IEEE TRANSACTIONS ON COMMUNICATIONS, VOL. 57, NO. 7, JULY 2009 Turbo Receivers for Interleave turbo receivers for Interleave- Division Multiple-Access (IDMA) systems will be discussed. The multiple provides faster convergence of the turbo receiver. The discussed turbo receivers will be evaluated by means

  10. Laboratory researcher Joel Rowland to receive DOE Early Career Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |Is Your Home asLCLSLaboratoryRowland to receive DOE Early Career

  11. NREL: Concentrating Solar Power Research - Receiver R&D

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Saleshttp://www.fnal.gov/directorate/nalcal/nalcal02_07_05_files/nalcal.gifNREL NRELChemical andWhat IsThermalReceiver R&D

  12. Hanford Projects Receive Sustainability Awards | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked Questions for DOE FYAffairs,Assessment Documents |Project|Projects Receive

  13. Westinghouse receives high marks for management, operation of WIPP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsing Maps1DOETHEWeeklyTRU Solutions LLC EarnsEarnsReceives

  14. EM Receives Several Honors in 2011 DOE Sustainability Awards | Department

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,Office ofEnergyFinalEnergy Boosts Efforts to Helpof Energy Receives

  15. RESEARCH Open Access Half-molar sodium lactate infusion improves

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    RESEARCH Open Access Half-molar sodium lactate infusion improves cardiac performance in acute heart for the myocardium at rest and during stress. We tested the effects of half-molar sodium lactate infusion on cardiac by 1 ml/kg/h continuous infusion for 24 hours. The control group received only a 3 ml/kg bolus

  16. The performance analysis of linux networking - packet receiving

    SciTech Connect (OSTI)

    Wu, Wenji; Crawford, Matt; Bowden, Mark; /Fermilab; ,

    2006-11-01T23:59:59.000Z

    The computing models for High-Energy Physics experiments are becoming ever more globally distributed and grid-based, both for technical reasons (e.g., to place computational and data resources near each other and the demand) and for strategic reasons (e.g., to leverage equipment investments). To support such computing models, the network and end systems, computing and storage, face unprecedented challenges. One of the biggest challenges is to transfer scientific data sets--now in the multi-petabyte (10{sup 15} bytes) range and expected to grow to exabytes within a decade--reliably and efficiently among facilities and computation centers scattered around the world. Both the network and end systems should be able to provide the capabilities to support high bandwidth, sustained, end-to-end data transmission. Recent trends in technology are showing that although the raw transmission speeds used in networks are increasing rapidly, the rate of advancement of microprocessor technology has slowed down. Therefore, network protocol-processing overheads have risen sharply in comparison with the time spent in packet transmission, resulting in degraded throughput for networked applications. More and more, it is the network end system, instead of the network, that is responsible for degraded performance of network applications. In this paper, the Linux system's packet receive process is studied from NIC to application. We develop a mathematical model to characterize the Linux packet receiving process. Key factors that affect Linux systems network performance are analyzed.

  17. FACSIM/MRS-1: Cask receiving and consolidation performance assessment

    SciTech Connect (OSTI)

    Lotz, T.L.; Shay, M.R.

    1987-06-01T23:59:59.000Z

    A simulation analysis was completed to assess the performance of the shipping cask receiving and spent-fuel handling, consolidation and canistering operations of the Monitored Retrievable Storage (MRS) facility. One purpose of this evaluation was to estimate the limits of MRS operational capabilities and factors leading to those limitations. The model used to obtain the performance assessment, FACSIM/MRS-1, is one of two components of the FACSIM model developed by PNL's simulation effort for the nuclear waste-handling facility. FACSIM/MRS-1 provides the user with information about lag-storage requirements, machine use, cask queues, welder queues, and cask process and cask turnaround times. The model can help determine the effect that the following activities have on operating efficiency: (1) receiving multiple cask shipments, when rail-cask or truck-cask shipments arrive at the facility in groups of two or more, and (2) operating the facility five days per week, three shifts per day or seven days per week, three shifts per day for any conditions. In addition, sensitivity to equipment failure frequency and the time needed for equipment repair can be studied. Information on the above operating characteristics may be obtained for any spent-fuel rate, any split of shipments between truck and rail transport, or any split of boiling water reactor/pressurized water reactor fuel.

  18. Received 14 Aug 2013 | Accepted 8 Sep 2014 | Published 13 Oct 2014 Improving battery safety by early detection of

    E-Print Network [OSTI]

    Cui, Yi

    ,2,4­7. For both lithium-ion and lithium metal rechargeable batteries, safety issues are often associated to lithium-ion-based batteries during the 1980s (refs 1,2,4). Current commercial lithium-ion batteries using Kong1 & Yi Cui1,3 Lithium-based rechargeable batteries have been widely used in portable electronics

  19. Case management to improve adherence for HIV-infected patients receiving antiretroviral therapy in Ethiopia: A micro-costing study

    E-Print Network [OSTI]

    2011-01-01T23:59:59.000Z

    Factsheet. 2005. 4. PEPFAR Country Profiles: Ethiopia. [www.pepfar.gov/countries/ ethiopia/index.htm]. 5. ZwillichHospital. 2007, I-TECH Ethiopia. 14. Monthly HIV Care and

  20. Advanced Thermal Storage for Central Receivers with Supercritical Coolants

    SciTech Connect (OSTI)

    Kelly, Bruce D.

    2010-06-15T23:59:59.000Z

    The principal objective of the study is to determine if supercritical heat transport fluids in a central receiver power plant, in combination with ceramic thermocline storage systems, offer a reduction in levelized energy cost over a baseline nitrate salt concept. The baseline concept uses a nitrate salt receiver, two-tank (hot and cold) nitrate salt thermal storage, and a subcritical Rankine cycle. A total of 6 plant designs were analyzed, as follows: Plant Designation Receiver Fluid Thermal Storage Rankine Cycle Subcritical nitrate salt Nitrate salt Two tank nitrate salt Subcritical Supercritical nitrate salt Nitrate salt Two tank nitrate salt Supercritical Low temperature H2O Supercritical H2O Two tank nitrate salt Supercritical High temperature H2O Supercritical H2O Packed bed thermocline Supercritical Low temperature CO2 Supercritical CO2 Two tank nitrate salt Supercritical High temperature CO2 Supercritical CO2 Packed bed thermocline Supercritical Several conclusions have been drawn from the results of the study, as follows: 1) The use of supercritical H2O as the heat transport fluid in a packed bed thermocline is likely not a practical approach. The specific heat of the fluid is a strong function of the temperatures at values near 400 °C, and the temperature profile in the bed during a charging cycle is markedly different than the profile during a discharging cycle. 2) The use of supercritical CO2 as the heat transport fluid in a packed bed thermocline is judged to be technically feasible. Nonetheless, the high operating pressures for the supercritical fluid require the use of pressure vessels to contain the storage inventory. The unit cost of the two-tank nitrate salt system is approximately $24/kWht, while the unit cost of the high pressure thermocline system is nominally 10 times as high. 3) For the supercritical fluids, the outer crown temperatures of the receiver tubes are in the range of 700 to 800 °C. At temperatures of 700 °C and above, intermetallic compounds can precipitate between, and within, the grains of nickel alloys. The precipitation leads to an increase in tensile strength, and a decrease in ductility. Whether the proposed tube materials can provide the required low cycle fatigue life for the supercritical H2O and CO2 receivers is an open question. 4) A ranking of the plants, in descending order of technical and economic feasibility, is as follows: i) Supercritical nitrate salt and baseline nitrate salt: equal ratings ii) Low temperature supercritical H2O iii) Low temperature supercritical CO2 iv) High temperature supercritical CO2 v) High temperature supercritical H2O 5) The two-tank nitrate salt thermal storage systems are strongly preferred over the thermocline systems using supercritical heat transport fluids.

  1. Current performance and potential improvements in solar thermal industrial heat

    SciTech Connect (OSTI)

    Hale, M.J.; Williams, T.; Barker, G.

    1992-12-01T23:59:59.000Z

    A representive current state-of-the-art system using parabolic trough technology was developed using data from a system recently installed in Tehachapi, California. A simulation model was used to estimate the annual energy output from the system at three different insolation locations. Based on discussions with industry personnel and within NREL, we identified a number of technology improvements that offer the potential for increasing the energy performance and reducing the energy-cost of the baseline system. The technology improvements modeled included an evacuated-tube receiver, an antireflective coating on the receiver tube, an improved absorber material, a cleaner reflecting surface, a reflecting surface that can withstand contact cleaning, and two silver reflectors. The properties associated with the improvements were incorporated into the model simulation at the three insolation locations to determine if there were any performance gains. The results showed that there was a potential for a more am 50% improvement in the annual energy delivered by a 2677 m{sup 2} system incorporating a combination of the enumerated technology improvements. We discuss the commercial and technological status of each design improvement and present performance predictions for the trough-design improvements.

  2. Current performance and potential improvements in solar thermal industrial heat

    SciTech Connect (OSTI)

    Hale, M.J.; Williams, T.; Barker, G.

    1992-12-01T23:59:59.000Z

    A representive current state-of-the-art system using parabolic trough technology was developed using data from a system recently installed in Tehachapi, California. A simulation model was used to estimate the annual energy output from the system at three different insolation locations. Based on discussions with industry personnel and within NREL, we identified a number of technology improvements that offer the potential for increasing the energy performance and reducing the energy-cost of the baseline system. The technology improvements modeled included an evacuated-tube receiver, an antireflective coating on the receiver tube, an improved absorber material, a cleaner reflecting surface, a reflecting surface that can withstand contact cleaning, and two silver reflectors. The properties associated with the improvements were incorporated into the model simulation at the three insolation locations to determine if there were any performance gains. The results showed that there was a potential for a more am 50% improvement in the annual energy delivered by a 2677 m[sup 2] system incorporating a combination of the enumerated technology improvements. We discuss the commercial and technological status of each design improvement and present performance predictions for the trough-design improvements.

  3. Waste receiving and processing plant control system; system design description

    SciTech Connect (OSTI)

    LANE, M.P.

    1999-02-24T23:59:59.000Z

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

  4. Carbon Characterization Laboratory Readiness to Receive Irradiated Graphite Samples

    SciTech Connect (OSTI)

    Karen A. Moore

    2011-05-01T23:59:59.000Z

    The Carbon Characterization Laboratory (CCL) is located in Labs C19 and C20 of the Idaho National Laboratory Research Center. The CCL was established under the Next Generation Nuclear Plant Project to support graphite and ceramic composite research and development activities. The research conducted in this laboratory will support the Advanced Graphite Creep experiments—a major series of material irradiation experiments within the Next Generation Nuclear Plant Graphite program. The CCL is designed to characterize and test low activated irradiated materials such as high purity graphite, carbon-carbon composites, silicon-carbide composite, and ceramic materials. The laboratory is fully capable of characterizing material properties for both irradiated and nonirradiated materials. Major infrastructural modifications were undertaken to support this new radiological facility at Idaho National Laboratory. Facility modifications are complete, equipment has been installed, radiological controls and operating procedures have been established and work management documents have been created to place the CCL in readiness to receive irradiated graphite samples.

  5. Energy Department Receives EPA Award for Top Green Power Purchase |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:RevisedAdvisoryStandard |in STEM EducationResiliencyImprove the

  6. Receiver subsystem analysis report (RADL Item 4-1). 10-MWe Solar Thermal Central-Receiver Pilot Plant: solar-facilities design integration

    SciTech Connect (OSTI)

    Not Available

    1982-04-01T23:59:59.000Z

    The results are presented of those thermal hydraulic, structural, and stress analyses required to demonstrate that the Receiver design for the Barstow Solar Pilot Plant will satisfy the general design and performance requirements during the plant's design life. Recommendations resulting from those analyses and supporting test programs are presented regarding operation of the receiver. The analyses are limited to receiver subsystem major structural parts (primary tower, receiver unit core support structure), pressure parts (absorber panels, feedwater, condensate and steam piping/components, flash tank, and steam mainfold) and shielding. (LEW)

  7. Selecting Mold Remediation Contractors (Spanish) 

    E-Print Network [OSTI]

    Renchie, Don L.

    2007-10-08T23:59:59.000Z

    eliminaci?n de moho Antes de dedicarse a la eliminaci?n de moho, un negocio debe cumplir con ciertos requisitos educativos, de entrenamiento, de evaluaci?n y de licenciamiento. Los consumidores deber?an solicitar copias de las licencias del negocio... Texas. Producido por AgriLife Communications, El Sistema Texas A&M Las publicaciones de Texas AgriLife Extension se pueden encontrar en Internet en: http://AgriLifebookstore.org Los programas educativos de Texas AgriLife Extension Service est...

  8. TOWN OF BABYLON TOWN / CONTRACTOR

    E-Print Network [OSTI]

    Kammen, Daniel M.

    : The Drawings are the graphic and pictorial portions of the Contract Documents showing the design, location with the standard practices of the Town of Babylon Office of the Comptroller. The statement shall include

  9. Selecting Mold Remediation Contractors (Spanish)

    E-Print Network [OSTI]

    Renchie, Don L.

    2007-10-08T23:59:59.000Z

    ER-027S 10-07 Don L. Renchie, L?der de Programa de Seguridad Agr?cola y Ambiental de Extensi?n Sistema Universitario Texas A&M Normas En el a?o 2003, Texas adopt? una de las series de normas m?s estrictas del pa?s para individuos dedicados a la... de la eliminaci?n. Informaci?n de contacto Para obtener informaci?n acerca de las Normas de Evaluaci?n y Eliminaci?n de Moho de Texas, cont?ctese con el Departamento de Servicios de Salud de Estado de Texas, Secci?n Calidad de Aire Interior al...

  10. Contractor Human Resources Management Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-02-06T23:59:59.000Z

    The revision will reflect organizational changes to Chapter III; delete references and requirements in Chapter IV; and remove CRDs from Chapters III and VII.

  11. APPENDIX III INDEPENDENT CONTRACTOR AGREEMENT

    E-Print Network [OSTI]

    Shihadeh, Alan

    -wide objective to supply 20% of their energy needs from renewable sources such as biomass, hydro, wind and solar at the expense of stronger fluctuations. The long-range spatial correlations of the wind field limit the level scepticism is mostly based on the fact that energy supply is often not available from any single cluster

  12. Contractor Human Resource Management Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30T23:59:59.000Z

    Cancels DOE 3220.1A, DOE 3220.4A, DOE 3220.6A, DOE 3309.1A, DOE 3830.1, DOE 3890.1A, and DOE N 3131.1.

  13. Hanford Advisory Board Contractor presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm) Harmonic EngineHIV andApril 8-9, 2015September

  14. Facility Security Officer Contractor Toolcart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederalFY 2008Facility

  15. Facility Security Officer Contractor Toolcart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederalFY 2008FacilityFlowdown of Requirements

  16. Facility Security Officer Contractor Toolcart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederalFY 2008FacilityFlowdown of RequirementsBADGE

  17. Facility Security Officer Contractor Toolcart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederalFY 2008FacilityFlowdown of

  18. Facility Security Officer Contractor Toolcart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederalFY 2008FacilityFlowdown ofBRIEFINGS SEC050,

  19. Facility Security Officer Contractor Toolcart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederalFY 2008FacilityFlowdown ofBRIEFINGS

  20. Facility Security Officer Contractor Toolcart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederalFY 2008FacilityFlowdown ofBRIEFINGSSNL