Powered by Deep Web Technologies
Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Computational illumination  

Science Conference Proceedings (OSTI)

The field of computational photography includes computational imaging techniques that enhance or extend the capabilities of digital photography, a combination of computer vision, computer graphics, and applied optics. Computational illumination is an ...

Matthew Turk

2010-11-01T23:59:59.000Z

2

Applied illumination engineering  

SciTech Connect

Beginning with a thorough assessment of current lighting technologies and their operating characteristics, this hands-on reference guides one through each step of effective, energy-efficient lighting design for both indoor and outdoor applications. The introductory chapters provide a convenient assessment of a full range of light sources, including metal halide, high pressure sodium, low pressure sodium, fluorescent and incandescent lamps. The basic elements of effective lighting design are clearly detailed and illustrated, including all required calculations and example problems. Step by step guidelines enable one to insure that designs have considered all critical light loss factors, site conditions, task requirements and special lighting use demands. Specific design approaches are covered in individual chapters on industrial lighting, office lighting, merchandise lighting, and outdoor lighting applications. Lighting controls and control strategies are examined in detail, as well as effective use of retrofit devices such as ballasts, reflectors, lenses and sensors to reduce lighting costs. Maintenance and troubleshooting of lamp and fixture problems are also covered. While the primary emphasis of this book is to provide a practical desk reference for the lighting designer, the elements of theory needed to analyze and solve unfamiliar design problems and applications have been included.

Lindsey, J.L.

1991-01-01T23:59:59.000Z

3

Nonimaging optical illumination system  

DOE Patents (OSTI)

A nonimaging illumination optical device for producing a selected far field illuminance over an angular range. The optical device includes a light source a light reflecting surface, and a family of light edge rays defined along a reference line with the reflecting surface defined in terms of the reference lines a parametric function R(t) where t is a scalar parameter position and R(t)=k(t)+Du(t) where k(t) is a parameterization of the reference line, and D is a distance from a point on the reference line to the reflection surface along the desired edge ray through the point. 35 figs.

Winston, R.; Ries, H.

1998-10-06T23:59:59.000Z

4

Nonimaging optical illumination system  

DOE Patents (OSTI)

A nonimaging illumination optical device for producing a selected far field illuminance over an angular range. The optical device includes a light source, a light reflecting surface, and a family of light edge rays defined along a reference line with the reflecting surface defined in terms of the reference line as a parametric function R(t) where t is a scalar parameter position and R(t)=k(t)+Du(t) where k(t) is a parameterization of the reference line, and D is a distance from a point on the reference line to the reflection surface along the desired edge ray through the point. 35 figs.

Winston, R.; Ries, H.

1996-12-17T23:59:59.000Z

5

Illumination Invariant Object Recognition  

E-Print Network (OSTI)

Varying illumination is a severe problem for existing face recognition algorithms. Altering the light direction from left to right, for example, causes a change of contrast in large face regions and lets most face recognition algorithms fail. Theoretical results, based on the law of incoherent light superposition, provide the solid ground on which a new illumination invariant recognition algorithm is derived. A face recognition experiment demonstrates that this algorithm indeed shows improved recognition performance even if the conditions, for which the theoretical results were derived, do not hold exactly. 1. A STATIC SCENE'S PICTURE SET UNDER VARYING LIGHTING Consider a static scene, lighted with a finite number N s of static light sources that may vary in luminance. These light sources can have arbitrary spatial extent and emit an arbitrary distribution of light. Let i 0 k denote the picture that is produced if only light source k is switched on with a unit luminance and call th...

Martin Bichsel

1995-01-01T23:59:59.000Z

6

Nonimaging optical illumination system  

DOE Patents (OSTI)

A nonimaging illumination optical device for producing a selected far field illuminance over an angular range. The optical device includes a light source 102, a light reflecting surface 108, and a family of light edge rays defined along a reference line 104 with the reflecting surface 108 defined in terms of the reference line 104 as a parametric function R(t) where t is a scalar parameter position and R(t)=k(t)+Du(t) where k(t) is a parameterization of the reference line 104, and D is a distance from a point on the reference line 104 to the reflection surface 108 along the desired edge ray through the point.

Winston, Roland (Chicago, IL); Ries, Harald (Villigen, CH)

1996-01-01T23:59:59.000Z

7

Nonimaging optical illumination system  

DOE Patents (OSTI)

A nonimaging illumination optical device for producing a selected far field illuminance over an angular range. The optical device includes a light source 102, a light reflecting surface 108, and a family of light edge rays defined along a reference line 104 with the reflecting surface 108 defined in terms of the reference line 104 as a parametric function R(t) where t is a scalar parameter position and R(t)=k(t)+Du(t) where k(t) is a parameterization of the reference line 104, and D is a distance from a point on the reference line 104 to the reflection surface 108 along the desired edge ray through the point.

Winston, Roland (Chicago, IL); Ries, Harald (Villigen PSI, CH)

1998-01-01T23:59:59.000Z

8

Nonimaging Optical Illumination System  

DOE Patents (OSTI)

A nonimaging illumination or concentration optical device. An optical device is provided having a light source, a light reflecting surface with an opening and positioned partially around the light source which is opposite the opening of the light reflecting surface. The light reflecting surface is disposed to produce a substantially uniform intensity output with the reflecting surface defined in terms of a radius vector R.sub.i in conjunction with an angle .phi..sub.i between R.sub.i, a direction from the source and an angle .theta..sub.i between direct forward illumination and the light ray reflected once from the reflecting surface. R.sub.i varies as the exponential of tan (.phi..sub.i -.theta..sub.i)/2 integrated over .phi..sub.i.

Winston, Roland (Chicago, IL)

1994-02-22T23:59:59.000Z

9

Nonimaging optical illumination system  

DOE Patents (OSTI)

A nonimaging illumination optical device for producing a selected far field illuminance over an angular range. The optical device includes a light source 102, a light reflecting surface 108, and a family of light edge rays defined along a reference line 104 with the reflecting surface 108 defined in terms of the reference line 104 as a parametric function R(t) where t is a scalar parameter position and R(t)=k(t)+Du(t) where k(t) is a parameterization of the reference line 104, and D is a distance from a point on the reference line 104 to the reflection surface 108 along the desired edge ray through the point.

Winston, Roland (Chicago, IL); Ries, Harald (Villigen PSI, CH)

2000-01-01T23:59:59.000Z

10

Real illumination from virtual environments  

Science Conference Proceedings (OSTI)

We introduce a method for actively controlling the illumination in a room so that it is consistent with a virtual world. In combination with a high dynamic range display, the system produces both uniform and directional illumination at intensity levels ...

Abhijeet Ghosh; Matthew Trentacoste; Helge Seetzen; Wolfgang Heidrich

2005-06-01T23:59:59.000Z

11

Nonimaging Optical Illumination System  

DOE Patents (OSTI)

A nonimaging illumination optical device for producing selected intensity output over an angular range. The device includes a light reflecting surface (24, 26) around a light source (22) which is disposed opposite the aperture opening of the light reflecting surface (24, 26). The light source (22) has a characteristic dimension which is small relative to one or more of the distance from the light source (22) to the light reflecting surface (24, 26) or the angle subtended by the light source (22) at the light reflecting surface (24, 26).

Winston, Roland (Chicago, IL)

1994-08-02T23:59:59.000Z

12

ILLUMINATION RESPONSE OF CDZNTE  

Science Conference Proceedings (OSTI)

CdZnTe (CZT) semiconducting crystals are of interest for use as room temperature X- and {gamma}-ray spectrometers. Several studies have focused on understanding the various electronic properties of these materials, such as the surface and bulk resistivities and the distribution of the electric field within the crystal. Specifically of interest is how these properties are influenced by a variety of factors including structural heterogeneities, such as secondary phases (SPs) and line defects as well as environmental effects. Herein, we report the bulk current, surface current, electric field distribution and performance of a spectrometer-grade CZT crystal exposed to above band-gap energy illumination.

Teague, L.; Washington, A.; Duff, M.

2011-08-02T23:59:59.000Z

13

Split-illumination electron holography  

Science Conference Proceedings (OSTI)

We developed a split-illumination electron holography that uses an electron biprism in the illuminating system and two biprisms (applicable to one biprism) in the imaging system, enabling holographic interference micrographs of regions far from the sample edge to be obtained. Using a condenser biprism, we split an electron wave into two coherent electron waves: one wave is to illuminate an observation area far from the sample edge in the sample plane and the other wave to pass through a vacuum space outside the sample. The split-illumination holography has the potential to greatly expand the breadth of applications of electron holography.

Tanigaki, Toshiaki; Aizawa, Shinji; Suzuki, Takahiro; Park, Hyun Soon [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Inada, Yoshikatsu [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan); Matsuda, Tsuyoshi [Japan Science and Technology Agency, Kawaguchi, Saitama 332-0012 (Japan); Taniyama, Akira [Corporate Research and Development Laboratories, Sumitomo Metal Industries, Ltd., Amagasaki, Hyogo 660-0891 (Japan); Shindo, Daisuke [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan); Tonomura, Akira [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Okinawa Institute of Science and Technology, Graduate University, Onna-son, Okinawa 904-0495 (Japan); Central Research Laboratory, Hitachi, Ltd., Hatoyama, Saitama 350-0395 (Japan)

2012-07-23T23:59:59.000Z

14

Facial feature detection under various illuminations  

Science Conference Proceedings (OSTI)

An efficient and robust method to locate eyes and lip corners under various illumination conditions is presented in this paper. First, a global illumination balance method is presented to compensate for variations in illumination and accentuate facial ...

Jingying Chen; Bernard Tiddeman

2007-11-01T23:59:59.000Z

15

United Illuminating | Open Energy Information  

Open Energy Info (EERE)

Illuminating Illuminating Jump to: navigation, search Logo: United Illuminating Name United Illuminating Address 157 Church St Place New Haven, Connecticut Zip 06510 Sector Services Product Green Power Marketer Website http://www.uinet.com/ Coordinates 41.3073289°, -72.9247896° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.3073289,"lon":-72.9247896,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

16

Defeating eavesdropping with quantum illumination  

E-Print Network (OSTI)

Quantum illumination is a paradigm for using entanglement to gain a performance advantage-in comparison with classical-state systems of the same optical power-over lossy, noisy channels that destroy entanglement. Previous ...

Xu, Wenbang

2012-01-01T23:59:59.000Z

17

Making Global Illumination User Friendly  

NLE Websites -- All DOE Office Websites (Extended Search)

Making Global Illumination User Friendly Making Global Illumination User Friendly Title Making Global Illumination User Friendly Publication Type Conference Paper LBNL Report Number LBL-37860 Year of Publication 1995 Authors Ward, Gregory J. Conference Name 6th Eurographics Workshop on Rendering Date Published 06/1995 Conference Location Dublin, Ireland Call Number LBL-37860 Abstract Global illumination researchers tend to think in terms of mesh density and sampling frequency, and their software reflects this in its user interface. Advanced rendering systems are rife with long command lines and parameters for tuning the sample densities, thresholds and other algorithm-specific variables, and the novice user is quickly lost in a sea of possibilities. This paper details a successful effort of making one such global illumination system usable by people who understand their problems, even if they do not understand the methods needed to solve them, through an assisted oracle approach. A single program is introduced to map a small set of intuitive control variables to the rendering commands and parameter settings needed to produce the desired output in a reasonable time. This new executive program then serves as the basis for a graphical user interface that is both friendly in its appearance and reliable in its performance. Finally, we conclude with some future directions for improving this interface.

18

Lumo: illumination for cel animation  

Science Conference Proceedings (OSTI)

A method is presented to approximate lighting on 2D drawings. The specific problem solved is the incorporation of 2D cel animation into live-action scenes, augmenting the existing method of drawn "rims and tones" with subtle environmental illumination. ... Keywords: cel animation, non-photorealistic rendering, sparse interpolation

Scott F. Johnston

2002-06-01T23:59:59.000Z

19

DARK-FIELD ILLUMINATION SYSTEM  

DOE Patents (OSTI)

A means was developed for viewing objects against a dark background from a viewing point close to the light which illuminates the objects and under conditions where the back scattering of light by the objects is minimal. A broad light retro-directing member on the opposite side of the objects from the light returns direct light back towards the source while directing other light away from the viewing point. The viewing point is offset from the light and thus receives only light which is forwardly scattered by an object while returning towards the source. The object is seen, at its true location, against a dark background. The invention is particularly adapted for illuminating and viewing nuclear particle tracks in a liquid hydrogen bubble chamber through a single chamber window. (AEC)

Norgren, D.U.

1962-07-24T23:59:59.000Z

20

Illumination invariant face image representation using quaternions  

Science Conference Proceedings (OSTI)

Variations in illumination is a well-known affecting factor of face recognition system performance. Feature extraction is one of the principal steps on a face recognition framework, where it is possible to alleviate the illumination effects on face images. ...

Dayron Rizo-Rodrguez; Heydi Mndez-Vzquez; Edel Garca-Reyes

2010-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior |  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior Published Middle East Asia Reservior Reviiew, 2006 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior Citation Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior [Internet]. 2006. Middle East Asia Reservior Reviiew. [cited 2013/10/22]. Available from: http://www.slb.com/~/media/Files/resources/mearr/num7/illuminating_reservoir.pdf Retrieved from

22

Hybrid lighting: Illuminating our future  

SciTech Connect

Hybrid lighting is a combination of natural and artificial illumination to be used indoors for all lighting needs. Ideally, hybrid lighting is effectively indistinguishable from standard artificial lighting except in quality and cost, where it will likely be an improvement. Hybrid lighting systems are produced by a combination of four technologies: collecting natural light, generating artificial light, transporting and distributing light to where it is needed, and controlling the amounts of both natural and artificial light continuously during usage. Lighting demands a large fraction of our energy needs. If we can control or decrease this demand, we are able to accommodate societal growth without energy demand growth.

Cates, M.R.

1996-12-31T23:59:59.000Z

23

Multifocal Multiphoton Laser-Scanning Structured Illumination ...  

Multifocal Multiphoton Laser-Scanning Structured Illumination Microscopy with Whole-Field Detection Colorado School of Mines. Contact CSM About This Technology

24

Global illumination with radiance regression functions  

Science Conference Proceedings (OSTI)

We present radiance regression functions for fast rendering of global illumination in scenes with dynamic local light sources. A radiance regression function (RRF) represents a non-linear mapping from local and contextual attributes of surface points, ... Keywords: global illumination, neural network, non-linear regression, real time rendering

Peiran Ren; Jiaping Wang; Minmin Gong; Stephen Lin; Xin Tong; Baining Guo

2013-07-01T23:59:59.000Z

25

Advanced global illumination using photon mapping  

Science Conference Proceedings (OSTI)

Photon mapping provides a practical way of efficiently simulating global illumination including interreflections, caustics, color bleeding, participating media and subsurface scattering in scenes with complicated geometry and advanced material models. ...

Wojciech Jarosz; Henrik Wann Jensen; Craig Donner

2008-08-01T23:59:59.000Z

26

Lattice-Based Volumetric Global Illumination  

E-Print Network (OSTI)

We describe a novel volumetric global illumination framework based on the Face-Centered Cubic (FCC) lattice. An FCC lattice has important advantages over a Cartesian lattice. It has higher packing density in the frequency domain, which translates to better sampling efficiency. Furthermore, it has the maximal possible kissing number (equivalent to the number of nearest neighbors of each site), which provides optimal 3D angular discretization among all lattices. We employ a new two-pass (illumination and rendering) global illumination scheme on an FCC lattice. This scheme exploits the angular discretization to greatly simplify the computation in multiple scattering and to minimize illumination information storage. The GPU has been utilized to further accelerate the rendering stage. We demonstrate our new framework with participating media and volume rendering with multiple scattering, where both are significantly faster than traditional techniques with comparable quality.

Feng Qiu; Fang Xu; Zhe Fan; Neophytou Neophytos; Arie Kaufman; Klaus Mueller

2007-01-01T23:59:59.000Z

27

Eden Park Illumination | Open Energy Information  

Open Energy Info (EERE)

Illumination Illumination Jump to: navigation, search Name Eden Park Illumination Place Champaign, Illinois Zip 61821 Product Illinois-based startup focused on the commercialisation and development of highly efficient microplasma lighting. Coordinates 40.1142°, -88.243499° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.1142,"lon":-88.243499,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

28

Fiber-type dosimeter with improved illuminator  

DOE Patents (OSTI)

A single-piece, molded plastic, Cassigrainian-type condenser arrangement is incorporated in a tubular-shaped personal pocket dosimeter of the type which combines an ionization chamber with an optically-read fiber electrometer to provide improved illumination of the electrometer fiber. The condenser routes incoming light from one end of the dosimeter tubular housing around a central axis charging pin assembly and focuses the light at low angles to the axis so that it falls within the acceptance angle of the electrometer fiber objective lens viewed through an eyepiece lens disposed in the opposite end of the dosimeter. This results in improved fiber illumination and fiber image contrast.

Fox, Richard J. (Oak Ridge, TN)

1987-01-01T23:59:59.000Z

29

Fiber-type dosimeter with improved illuminator  

DOE Patents (OSTI)

A single-piece, molded plastic, Cassigrainian-type condenser arrangement is incorporated in a tubular-shaped personal pocket dosimeter of the type which combines an ionization chamber with an optically-read fiber electrometer to provide improved illumination of the electrometer fiber. The condenser routes incoming light from one end of the dosimeter tubular housing around a central axis charging pin assembly and focuses the light at low angles to the axis so that it falls within the acceptance angle of the electrometer fiber objective lens viewed through an eyepiece lens disposed in the opposite end of the dosimeter. This results in improved fiber illumination and fiber image contrast.

Fox, R.J.

1985-12-23T23:59:59.000Z

30

Visual calibration and correction for ambient illumination  

Science Conference Proceedings (OSTI)

Many applications require that an image will appear the same regardless of where or how it is displayed. However, the conditions in which an image is displayed can adversely affect its appearance. Computer monitor screens not only emit light, but can ... Keywords: Viewing conditions, ambient illumination, contrast correction, device independence, ergonomics, perceptually accurate display, reflections

Kate Devlin; Alan Chalmers; Erik Reinhard

2006-10-01T23:59:59.000Z

31

Structure Illuminates Mechanism of Fungal Polyketide Cyclization  

NLE Websites -- All DOE Office Websites (Extended Search)

Structure Illuminates Mechanism Structure Illuminates Mechanism of Fungal Polyketide Cyclization Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Wednesday, 31 March 2010 00:00 Polyketide natural products produced by bacteria and fungi are often characterized by the presence of multiple aromatic rings that are responsible for the activity of polyketides as both beneficial antibiotic and anticancer agents and as dangerous toxic compounds, such as the highly carcinogenic aflatoxins that are produced by fungal species from the Aspergillus family of molds. Polyketide ring formation by fungal enzymes called polyketide synthases (PKSs) is mediated by the enzyme's product template (PT) domain. However, the mechanism for aromatic ring formation from a linear intermediate with high fidelity has remained unclear. To reveal the cyclization mechanism, researchers at the University of California, Irvine, and The Johns Hopkins University solved the structure of the isolated PT domain of the PKS involved in aflatoxin production (PksA) to 1.8 Å using data from ALS Beamline 8.2.2 and SSRL Beamline 9-1. The crystal structure, along with biochemical studies, provides a paradigm for polyketide cyclization by fungal PKSs, an event that is necessary for imparting biological activity to this large class of clinically relevant natural products.

32

Structure Illuminates Mechanism of Fungal Polyketide Cyclization  

NLE Websites -- All DOE Office Websites (Extended Search)

Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Polyketide natural products produced by bacteria and fungi are often characterized by the presence of multiple aromatic rings that are responsible for the activity of polyketides as both beneficial antibiotic and anticancer agents and as dangerous toxic compounds, such as the highly carcinogenic aflatoxins that are produced by fungal species from the Aspergillus family of molds. Polyketide ring formation by fungal enzymes called polyketide synthases (PKSs) is mediated by the enzyme's product template (PT) domain. However, the mechanism for aromatic ring formation from a linear intermediate with high fidelity has remained unclear. To reveal the cyclization mechanism, researchers at the University of California, Irvine, and The Johns Hopkins University solved the structure of the isolated PT domain of the PKS involved in aflatoxin production (PksA) to 1.8 Å using data from ALS Beamline 8.2.2 and SSRL Beamline 9-1. The crystal structure, along with biochemical studies, provides a paradigm for polyketide cyclization by fungal PKSs, an event that is necessary for imparting biological activity to this large class of clinically relevant natural products.

33

Structure Illuminates Mechanism of Fungal Polyketide Cyclization  

NLE Websites -- All DOE Office Websites (Extended Search)

Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Polyketide natural products produced by bacteria and fungi are often characterized by the presence of multiple aromatic rings that are responsible for the activity of polyketides as both beneficial antibiotic and anticancer agents and as dangerous toxic compounds, such as the highly carcinogenic aflatoxins that are produced by fungal species from the Aspergillus family of molds. Polyketide ring formation by fungal enzymes called polyketide synthases (PKSs) is mediated by the enzyme's product template (PT) domain. However, the mechanism for aromatic ring formation from a linear intermediate with high fidelity has remained unclear. To reveal the cyclization mechanism, researchers at the University of California, Irvine, and The Johns Hopkins University solved the structure of the isolated PT domain of the PKS involved in aflatoxin production (PksA) to 1.8 Å using data from ALS Beamline 8.2.2 and SSRL Beamline 9-1. The crystal structure, along with biochemical studies, provides a paradigm for polyketide cyclization by fungal PKSs, an event that is necessary for imparting biological activity to this large class of clinically relevant natural products.

34

High Efficiency, Illumination Quality OLEDs for Lighting  

SciTech Connect

The goal of the program was to demonstrate a 45 lumen per watt white light device based upon the use of multiple emission colors through the use of solution processing. This performance level is a dramatic extension of the team's previous 15 LPW large area illumination device. The fundamental material system was based upon commercial polymer materials. The team was largely able to achieve these goals, and was able to deliver to DOE a 90 lumen illumination source that had an average performance of 34 LPW a 1000 cd/m{sup 2} with peak performances near 40LPW. The average color temperature is 3200K and the calculated CRI 85. The device operated at a brightness of approximately 1000cd/m{sup 2}. The use of multiple emission colors particularly red and blue, provided additional degrees of design flexibility in achieving white light, but also required the use of a multilayered structure to separate the different recombination zones and prevent interconversion of blue emission to red emission. The use of commercial materials had the advantage that improvements by the chemical manufacturers in charge transport efficiency, operating life and material purity could be rapidly incorporated without the expenditure of additional effort. The program was designed to take maximum advantage of the known characteristics of these material and proceeded in seven steps. (1) Identify the most promising materials, (2) assemble them into multi-layer structures to control excitation and transport within the OLED, (3) identify materials development needs that would optimize performance within multilayer structures, (4) build a prototype that demonstrates the potential entitlement of the novel multilayer OLED architecture (5) integrate all of the developments to find the single best materials set to implement the novel multilayer architecture, (6) further optimize the best materials set, (7) make a large area high illumination quality white OLED. A photo of the final deliverable is shown. In 2003, a large area, OLED based illumination source was demonstrated that could provide light with a quality, quantity, and efficiency on par with what can be achieved with traditional light sources. The demonstration source was made by tiling together 16 separate 6-inch x 6-inch blue-emitting OLEDs. The efficiency, total lumen output, and lifetime of the OLED based illumination source were the same as what would be achieved with an 80 watt incandescent bulb. The devices had an average efficacy of 15 LPW and used solution-processed OLEDs. The individual 6-inch x 6-inch devices incorporated three technology strategies developed specifically for OLED lighting -- downconversion for white light generation, scattering for outcoupling efficiency enhancement, and a scalable monolithic series architecture to enable large area devices. The downconversion approach consists of optically coupling a blue-emitting OLED to a set of luminescent layers. The layers are chosen to absorb the blue OLED emission and then luminescence with high efficiency at longer wavelengths. The composition and number of layers are chosen so that the unabsorbed blue emission and the longer wavelength re-emission combine to make white light. A downconversion approach has the advantage of allowing a wide variety of colors to be made from a limited set of blue emitters. In addition, one does not have to carefully tune the emission wavelength of the individual electro-luminescent species within the OLED device in order to achieve white light. The downconversion architecture used to develop the 15LPW large area light source consisted of a polymer-based blue-emitting OLED and three downconversion layers. Two of the layers utilized perylene based dyes from BASF AG of Germany with high quantum efficiency (>98%) and one of the layers consisted of inorganic phosphor particles (Y(Gd)AG:Ce) with a quantum efficiency of {approx}85%. By independently varying the optical density of the downconversion layers, the overall emission spectrum could be adjusted to maximize performance for lighting (e.g. blackbody temp

Joseph Shiang; James Cella; Kelly Chichak; Anil Duggal; Kevin Janora; Chris Heller; Gautam Parthasarathy; Jeffery Youmans; Joseph Shiang

2008-03-31T23:59:59.000Z

35

X-rays Illuminate Ancient Archimedes Text  

NLE Websites -- All DOE Office Websites (Extended Search)

Related Links: Related Links: May 2005 Headlines TIP Article Press Release Walters Art Museum SSRL Home Page SLAC Home Page Stanford Home Page Tuesday, 31 May 2005 X-rays Illuminate Ancient Archimedes Text (contact: Uwe Bergmann, bergmann@slac.stanford.edu) Archimedes Figure Image provided by Will Noel, The Walters Art Museum An early transcription of Archimedes' mathematical theories has been brought to light through the probing of high-intensity x-rays at SSRL's BL6-2. The text contains part of the Method of Mechanical Theorems, one of Archimedes' most important works, which was probably copied out by a scribe in the tenth century. The parchment on which it was written was later scraped down and reused as pages in a twelfth century prayer book, producing a document known as a palimpsest (which comes from the Greek,

36

Achromatic illumination system for small targets  

DOE Patents (OSTI)

A pair of light beams is directed to provide illumination that is substantially uniform from all directions on a small target by a system comprising a pair of corrector windows, a pair of planar reflecting surfaces, a pair of paraboloidal mirrors and a reflecting mirror cavity. The components are arranged so that each of the beams passes through a corrector and is reflected from the planar surface to the paraboloidal mirror, from which it is focused through a hole in the planar surface to the interior of the cavity. The surface of the interior portion of the cavity is shaped to reflect the focused beam three times before the focused reflected beam strikes the target.

Sigler, Robert D. (Ann Arbor, MI)

1979-01-01T23:59:59.000Z

37

Technology Focus - Hybrid Solar Lighting Illuminates Energy Savings...  

NLE Websites -- All DOE Office Websites (Extended Search)

taxpayer dollars taxpayer dollars in federal facilities in federal facilities Hybrid Solar Lighting Illuminates Energy Savings for Government Facilities New technology provides...

38

Low-Cost Illumination-Grade LEDs  

SciTech Connect

Solid State Lighting is a cost-effective, energy-conserving technology serving a rapidly expand- ing multi-billion dollar market. This program was designed to accelerate this lighting revolution by reducing the manufacturing cost of Illumination-Grade LEDs. The technical strategy was to investigate growth substrate alternatives to standard planar sapphire, select the most effective and compatible option, and demonstrate a significant increase in Lumen/$ with a marketable LED. The most obvious alternate substrate, silicon, was extensively studied in the first two years of the program. The superior thermal and mechanical properties of Si were expected to improve wavelength uniformity and hence color yield in the manufacture of high-power illumination- grade LEDs. However, improvements in efficiency and epitaxy uniformity on standard c-plane sapphire diminished the advantages of switching to Si. Furthermore, the cost of sapphire decreased significantly and the cost of processing Si devices using our thin film process was higher than expected. We concluded that GaN on Si was a viable technology but not a practical option for Philips Lumileds. Therefore in 2012 and 2013, we sought and received amendments which broadened the scope to include other substrates and extended the time of execution. Proprietary engineered substrates, off-axis (non-c-plane) sapphire, and c-plane patterned sapphire substrates (PSS) were all investigated in the final 18 months of this program. Excellent epitaxy quality was achieved on all three candidates; however we eliminated engineered substrates and non-c-plane sapphire because of their higher combined cost of substrate, device fabrication and packaging. Ultimately, by fabricating a flip-chip (FC) LED based upon c-plane PSS we attained a 42% reduction in LED manufacturing cost relative to our LUXEON Rebel product (Q1-2012). Combined with a flux gain from 85 to 102 Lm, the LUXEON Q delivered a 210% increase in Lm/$ over this time period. The technology was commercialized in our LUXEON Q product in Sept., 2013. Also, the retention of the sapphire increased the robustness of the device, enabling sales of low-cost submount-free chips to lighting manufacturers. Thus, blue LED die sales were initiated in the form of a PSS-FC in February, 2013.

Epler, John

2013-08-31T23:59:59.000Z

39

Hardware-accelerated global illumination by image space photon mapping  

Science Conference Proceedings (OSTI)

We describe an extension to photon mapping that recasts the most expensive steps of the algorithm -- the initial and final photon bounces -- as image-space operations amenable to GPU acceleration. This enables global illumination for real-time applications ... Keywords: global illumination, photon mapping, photon volumes

Morgan McGuire; David Luebke

2009-08-01T23:59:59.000Z

40

Efficient White SSL Component for General Illumination  

SciTech Connect

Cree has developed a new, high-efficiency, low-cost, light emitting diode (LED) module that should be capable of replacing standard, halogen, fluorescent and metal halide lamps based on the total cost of ownership. White LEDs are produced by combining one or more saturated color LEDs with a phosphor or other light down-converting media to achieve white broad-band illumination. This two year project addressed LED chip, package and phosphor efficiency improvements to establish a technology platform suitable for low-cost, high-efficiency commercial luminaires. New phosphor materials with improved quantum efficiency at 'real-life' operating conditions were developed along with new package technology to improve the efficiency of warm white LED modules compared to the baseline technology. Specifically, Cree has successfully demonstrated warm white LED modules providing 540 lumens at a correlated color temperature (CCT) of 3000 K. The LED module had an efficacy of 102.8 lumens per watt (LPW) using 1 mm2 chips biased at 350 mA - a 27% improvement over the technology at project start (81 LPW at 3000K). The white modules also delivered an efficacy of 88 LPW at elevated junction temperatures of 125 C. In addition, a proof-of-concept 4-inch downlight luminaire produced a flux of 1183 lumens at a CCT of 2827 K and a color rendering index (CRI) of 80 using this project's phosphor developments.

Sean Evans

2011-01-31T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Standard specification for illuminators used for viewing industrial radiographs  

E-Print Network (OSTI)

1.1 The function of the illuminator is to provide sufficient illumination and viewing capabilities for the purpose of identification and interpretation of radiographic images. This specification provides the recommended minimum requirements for Industrial Radiographic Illuminators used for viewing industrial radiographic films using transmitted light sources. 1.2 The illuminator has to ensure the same safety for personnel, or users of any electric apparatus, as specified by electrical standards applicable in the country in which the illuminator is used. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3 Values stated in SI units are to be regarded as the standard. The values given in parenthesis are provided for information only.

American Society for Testing and Materials. Philadelphia

2006-01-01T23:59:59.000Z

42

United Illuminating - ZREC and LREC Long Term Contracts (Connecticut) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United Illuminating - ZREC and LREC Long Term Contracts United Illuminating - ZREC and LREC Long Term Contracts (Connecticut) United Illuminating - ZREC and LREC Long Term Contracts (Connecticut) < Back Eligibility Agricultural Commercial Construction Fed. Government Industrial Installer/Contractor Institutional Local Government Low-Income Residential Multi-Family Residential Nonprofit Schools State Government Tribal Government Savings Category Bioenergy Alternative Fuel Vehicles Hydrogen & Fuel Cells Solar Buying & Making Electricity Wind Maximum Rebate $325.50 per ZREC; $200 per LREC Program Info Funding Source RPS Start Date 05/01/2012 State Connecticut Program Type Performance-Based Incentive Provider The United Illuminating Company Note: The deadline for the second request for proposals (RFP) under this program is June 13, 2013.

43

The United Illuminating Company - Small ZREC Tariff | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The United Illuminating Company - Small ZREC Tariff The United Illuminating Company - Small ZREC Tariff The United Illuminating Company - Small ZREC Tariff < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Low-Income Residential Multi-Family Residential Nonprofit Residential Schools State Government Tribal Government Savings Category Water Buying & Making Electricity Solar Home Weatherization Wind Program Info Funding Source RPS Start Date 01/08/2013 State Connecticut Program Type Performance-Based Incentive Rebate Amount $148.89 per ZREC Provider The United Illuminating Company Note: The 2013 application period has closed. In July 2011, Connecticut enacted legislation amending the state's [http://www.dsireusa.org/incentives/incentive.cfm?Incentive_Code=CT04R&re...

44

CALCULATING INTERIOR DAYLIGHT ILLUMINATION WITH A PROGRAMMABLE HAND CALCULATOR  

E-Print Network (OSTI)

Window Azimuth from Sun so Solar Altitude o Table A40 Solar Azimuth: 90 Window Orientation: 90 west sunsolar altitudes, while fg is determined as follows: where Illumination from the sun (

Bryan, Harvey J.

2013-01-01T23:59:59.000Z

45

CALCULATING INTERIOR DAYLIGHT ILLUMINATION WITH A PROGRAMMABLE HAND CALCULATOR  

E-Print Network (OSTI)

orientations and solar where E sun E 8 k y Illumination fromClear Sky Solar Altitude oo Window Azimuth from Sun goo .40 Solar Azimuth: 90 Window Orientation: 90 west of sun

Bryan, Harvey J.

2013-01-01T23:59:59.000Z

46

Critical illumination condenser for x-ray lithography  

DOE Patents (OSTI)

A critical illumination condenser system, particularly adapted for use in extreme ultraviolet (EUV) projection lithography based on a ring field imaging system and a laser produced plasma source. The system uses three spherical mirrors and is capable of illuminating the extent of the mask plane by scanning either the primary mirror or the laser plasma source. The angles of radiation incident upon each mirror of the critical illumination condenser vary by less than eight (8) degrees. For example, the imaging system in which the critical illumination condenser is utilized has a 200 .mu.m source and requires a magnification of 26.times.. The three spherical mirror system constitutes a two mirror inverse Cassegrain, or Schwarzschild configuration, with a 25% area obstruction (50% linear obstruction). The third mirror provides the final pupil and image relay. The mirrors include a multilayer reflective coating which is reflective over a narrow bandwidth.

Cohen, Simon J. (Pleasanton, CA); Seppala, Lynn G. (Livermore, CA)

1998-01-01T23:59:59.000Z

47

Critical illumination condenser for x-ray lithography  

DOE Patents (OSTI)

A critical illumination condenser system is disclosed, particularly adapted for use in extreme ultraviolet (EUV) projection lithography based on a ring field imaging system and a laser produced plasma source. The system uses three spherical mirrors and is capable of illuminating the extent of the mask plane by scanning either the primary mirror or the laser plasma source. The angles of radiation incident upon each mirror of the critical illumination condenser vary by less than eight (8) degrees. For example, the imaging system in which the critical illumination condenser is utilized has a 200 {micro}m source and requires a magnification of 26. The three spherical mirror system constitutes a two mirror inverse Cassegrain, or Schwarzschild configuration, with a 25% area obstruction (50% linear obstruction). The third mirror provides the final pupil and image relay. The mirrors include a multilayer reflective coating which is reflective over a narrow bandwidth. 6 figs.

Cohen, S.J.; Seppala, L.G.

1998-04-07T23:59:59.000Z

48

Using Procedural RenderMan Shaders for Global Illumination  

E-Print Network (OSTI)

Global illumination techniques like radiosity or Monte-Carlo ray-tracing are becoming standard features of rendering systems. However, there is currently no accepted interface format which supports an appropriate physically-based scene description. In this paper we present extensions to the well-known RenderMan interface, which allow for a physically based scene description and support advanced global illumination techniques. Special emphasis has been laid on the support for procedural descriptions of reflection and emission by RenderMan surface shaders. So far, they could not be used with most global illumination algorithms. The extensions have been implemented in a physically-based rendering system and are illustrated with examples. 1. Introduction In recent years physically-based rendering and global illumination have became major topics in computer graphics. While these techniques are on the edge of being used in commercial applications, it is getting more and more important to fi...

Philipp Slusallek; Thomas Pflaum; Hans-peter Seidel

1995-01-01T23:59:59.000Z

49

Radiance cache splatting: a GPU-friendly global illumination algorithm  

Science Conference Proceedings (OSTI)

Fast global illumination computation is a challenge in several fields such as lighting simulation and computergenerated visual effects for movies. To this end, the irradiance caching algorithm is commonly used since it provides high-quality rendering ...

Pascal Gautron; Jaroslav K?ivnek; Kadi Bouatouch; Sumanta Pattanaik

2008-08-01T23:59:59.000Z

50

Measurements of sky luminance, sky illuminance, and horizontal solar radiation  

Science Conference Proceedings (OSTI)

This paper presents initial findings of a sky measurement program currently in progress at the National Bureau of Standards. Measurements are reported on sky luminance and illuminance and how they relate to horizontal solar radiation and sun position. Correlations are presented relating horizontal illuminance to horizontal solar radiation, and zenith luminance to solar altitude. These empirical models are particularly suitable for use in daylighting energy studies since they are based on existing solar data currently available on standard weather tapes.

Treado, S.; Gillette, G.

1983-04-01T23:59:59.000Z

51

Pilot Study: Measurement of Room Illuminance to Assess Automatic Brightness  

NLE Websites -- All DOE Office Websites (Extended Search)

Study: Measurement of Room Illuminance to Assess Automatic Brightness Study: Measurement of Room Illuminance to Assess Automatic Brightness Control in Televisions Title Pilot Study: Measurement of Room Illuminance to Assess Automatic Brightness Control in Televisions Publication Type Conference Proceedings Year of Publication 2012 Authors Greenblatt, Jeffery B., Mia Forbes Pirie, Louis-Benoit Desroches, Sally M. Donovan, Clancy Donnelly, Craig Billingsley, and Chris Calwell Pagination 13 Date Published August 12 Conference Location Berkeley Abstract Automatic brightness control (ABC) is an increasingly common feature found in newtelevisions (TVs) and computer monitors. ABC is intended to adjust TV screen brightness(luminance) according to the ambient light level (room illuminance). When implementedcorrectly, this can both reduce energy consumption and improve viewing quality. The currentENERGY STAR test procedure provides for a more favorable energy use rating for TVs withABC, by measuring power consumption at two light levels (0 and 300 lux) and reporting aweighted-average energy use. However, this and other studies suggest that these levels are notrepresentative of actual TV viewing conditions.As there were currently only limited data available concerning room illuminance, weundertook a small pilot study in 2011 to begin to answer two key questions: 1. To what extent doroom illuminance levels vary depending on the location of measurement (e.g., center of theroom, on the couch, or at the TV)? 2. What room illuminance conditions are prevalent whenpeople watch TV?We measured room illuminance in the homes of nine volunteers in California andColorado to begin addressing the above two questions. Although the study had the usualdrawbacks of a pilot (limited sample size, time duration, etc.), it has, nonetheless, yielded usefulresults. The study shows definitively that there is large variability between measurements madeat different locations in the room and, therefore, that location of room illuminance measurementsis critical. Moreover, the majority (over 75%) of TV viewing occurred at illuminance levels ofless than 50 lux (though measurements of up to several hundred lux were also recorded), a resultthat was consistent with subsequent larger-scale studies. This type of information can helpdetermine how ABC-enabled TVs should be tested to best represent actual viewing conditions.

52

Uniform illumination rendering using an array of LEDs: a signal processing perspective  

Science Conference Proceedings (OSTI)

An array of a large number of LEDs will be widely used in future indoor illumination systems. In this paper, we investigate the problem of rendering uniform illumination by a regular LED array on the ceiling of a room. We first present two general results ... Keywords: LED illumination, basic illumination pattern, regular grid, two-dimensional signal processing

Hongming Yang; Jan W. M. Bergmans; Tim C. W. Schenk; Jean-Paul M. G. Linnartz; Ronald Rietman

2009-03-01T23:59:59.000Z

53

A Photon Mapping Based Approach to Computing Celestial Illumination  

E-Print Network (OSTI)

For photographers to capture good pictures of their subjects, the lighting conditions must be taken into account and adjusted for accordingly. The same holds true for a satellite attempting to photograph another object in space: it must know the lighting conditions to adjust camera settings and position itself properly to take the best photograph. This thesis presents a photon mapping based algorithm to compute a physically accurate representation of the illumination of objects in orbit around the Earth, taking into account the effects that cause refraction in the atmosphere. I also discuss the assumptions that I have made to utilize the algorithm in an interactive 3D visualization tool, which I implemented to view the illumination on objects at arbitrary positions in space. Finally, I show that the photon mapping method offers improvements over simpler methods of computing illumination.

Penney, Jonathan

2009-05-01T23:59:59.000Z

54

Local and Global Illumination in the Volume Rendering Integral  

SciTech Connect

This article is intended as an update of the major survey by Max [1] on optical models for direct volume rendering. It provides a brief overview of the subject scope covered by [1], and brings recent developments, such as new shadow algorithms and refraction rendering, into the perspective. In particular, we examine three fundamentals aspects of direct volume rendering, namely the volume rendering integral, local illumination models and global illumination models, in a wavelength-independent manner. We review the developments on spectral volume rendering, in which visible light are considered as a form of electromagnetic radiation, optical models are implemented in conjunction with representations of spectral power distribution. This survey can provide a basis for, and encourage, new efforts for developing and using complex illumination models to achieve better realism and perception through optical correctness.

Max, N; Chen, M

2005-10-21T23:59:59.000Z

55

Characterisation of pulsed Carbon fiber illuminators for FIR instrument calibration  

E-Print Network (OSTI)

We manufactured pulsed illuminators emitting in the far infrared for the Planck-HFI bolometric instrument ground calibrations. Specific measurements have been conducted on these light sources, based on Carbon fibers, to understand and predict their properties. We present a modelisation of the temperature dependence of the thermal conductivity and the calorific capacitance of the fibers. A comparison between simulations and bolometer data is given, that shows the coherence of our model. Their small time constants, their stability and their emission spectrum pointing in the submm range make these illuminators a very usefull tool for calibrating FIR instruments.

Henrot-Versill, S; Couchot, F

2007-01-01T23:59:59.000Z

56

Characterisation of pulsed Carbon fiber illuminators for FIR instrument calibration  

E-Print Network (OSTI)

We manufactured pulsed illuminators emitting in the far infrared for the Planck-HFI bolometric instrument ground calibrations. Specific measurements have been conducted on these light sources, based on Carbon fibers, to understand and predict their properties. We present a modelisation of the temperature dependence of the thermal conductivity and the calorific capacitance of the fibers. A comparison between simulations and bolometer data is given, that shows the coherence of our model. Their small time constants, their stability and their emission spectrum pointing in the submm range make these illuminators a very usefull tool for calibrating FIR instruments.

S. Henrot-Versille; R. Cizeron; F. Couchot

2007-07-31T23:59:59.000Z

57

Illuminating clay: a 3-D tangible interface for landscape analysis  

Science Conference Proceedings (OSTI)

This paper describes a novel system for the real-time computational analysis of landscape models. Users of the system - called Illuminating Clay - alter the topography of a clay landscape model while the changing geometry is captured in real-time by ... Keywords: 3D laser scanner, DEM, GIS, landscape design, physical models, tangible user interface

Ben Piper; Carlo Ratti; Hiroshi Ishii

2002-04-01T23:59:59.000Z

58

New LED light sources and lamps for general illumination  

E-Print Network (OSTI)

of light source compared to traditional light sources like incandescent bulbs and fluorescent tubes bulb. LEDs emit colored light with a narrow spectral band of 20-30 nm, colors covering the spectralNew LED light sources and lamps for general illumination Carsten Dam-Hansen, Birgitte Thestrup

59

Color-accurate underwater imaging using perceptual adaptive illumination  

Science Conference Proceedings (OSTI)

Capturing color in water is challenging due to the heavy non-uniform attenuation of light in water across the visible spectrum, which results in dramatic hue shifts toward blue. Yet observing color in water is important for monitoring and surveillance ... Keywords: Accurate colors, Adaptive illumination, Color rendering index, Underwater imaging

Iuliu Vasilescu; Carrick Detweiler; Daniela Rus

2011-10-01T23:59:59.000Z

60

Apparatus and method for generating partially coherent illumination for photolithography  

DOE Patents (OSTI)

The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system comprises a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media.

Sweatt, William C. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Color-Accurate Underwater Imaging using Perceptual Adaptive Illumination  

E-Print Network (OSTI)

Color-Accurate Underwater Imaging using Perceptual Adaptive Illumination Iuliu Vasilescu, Carrick, and ecosystem health and activity monitoring. Underwater robots are equipped with motor control for large scale transects but they lack sensors that enable capturing color-accurate underwater images. We present a method

Farritor, Shane

62

Apparatus and method for generating partially coherent illumination for photolithography  

DOE Patents (OSTI)

The present invention relates an apparatus and method for creating a bright, uniform source of partially coherent radiation for illuminating a pattern, in order to replicate an image of said pattern with a high degree of acuity. The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system includes a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media. 7 figs.

Sweatt, W.C.

1999-07-06T23:59:59.000Z

63

Apparatus and method for generating partially coherent illumination for photolithography  

DOE Patents (OSTI)

The present invention relates an apparatus and method for creating a bright, uniform source of partially coherent radiation for illuminating a pattern, in order to replicate an image of said pattern with a high degree of acuity. The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system includes a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media.

Sweatt, William C. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

64

Illumination system having a plurality of movable sources  

DOE Patents (OSTI)

An illumination system includes several discharge sources that are multiplexed together to reduce the amount of debris generated. The system includes: (a) a first electromagnetic radiation source array that includes a plurality of first activatable radiation source elements that are positioned on a first movable carriage; (b) a second electromagnetic radiation source array that includes a plurality of second activatable radiation source elements that are positioned on a second movable carriage; (c) means for directing electromagnetic radiation from the first electromagnetic radiation source array and electromagnetic radiation from the second electromagnetic radiation source array toward a common optical path; (d) means for synchronizing (i) the movements of the first movable carriage and of the second movable carriage and (ii) the activation of the first electromagnetic radiation source array and of the second electromagnetic radiation source array to provide an essentially continuous illumination of electromagnetic radiation along the common optical path.

Sweatt, William C. (Albuquerque, NM); Kubiak, Glenn D. (Livermore, CA)

2002-01-01T23:59:59.000Z

65

Determining daylight illuminance in rooms having complex fenestration systems  

SciTech Connect

Traditional computational models predict daylight illuminance in a space by dividing window surfaces into discrete areas and then calculating the apparent luminance of each window element by multiplying the luminance of the natural light source in a given viewing direction by the window transmittance in that direction. This approach works well for conventional glazing materials but is incapable of modeling commonly used, but complex, window systems such as those with specular reflective venetian blinds. We describe a new approach that combines measured luminance distributions for complex window systems with a flux transfer calculation within the space. This method resembles the calculation of illuminance from electric light fixtures where the candlepower distribution of the fixtures is measured and used as an input to the calculation. Based on the variable luminance characteristics of the window system, the SUPERLITE program calculates illuminance at the workplane over the entire space. The measurement techniques and mathematical implementation in the SUPERLITE program are described. This approach allows a wide range of complex and shading systems to be evaluated without continuous changes in the computational program. A special apparatus for measuring the bidirectional transmittance of window systems has been built in conjunction with this approach. Sample results from the program are compared to measurements made in scale models in a sky simulator. 5 refs., 6 figs.

Kim, J.J.; Papamichael, K.M.; Selkowitz, S.; Spitzglas, M.; Modest, M.

1986-11-01T23:59:59.000Z

66

Book illumination and architectural decoration : the Mausoleum of Uljaytu in Sultaniyya  

E-Print Network (OSTI)

This thesis examines the conventions of two-dimensional articulation in architecture and its relationship to book illumination in early fourteenth century Iran. By examining the illuminations in a series of imperial Qurans ...

Bagchee, Nandini, 1968-

2000-01-01T23:59:59.000Z

67

Multispectral imaging of the ocular fundus using light emitting diode illumination  

E-Print Network (OSTI)

Multispectral imaging of the ocular fundus using light emitting diode illumination N. L. Everdell,1 on light emitting diode LED illumination that produces multispectral optical images of the human ocular

Claridge, Ela

68

Illumination of interior spaces by bended hollow light guides: Application of the theoretical light propagation method  

SciTech Connect

To ensure comfort and healthy conditions in interior spaces the thermal, acoustics and daylight factors of the environment have to be considered in the building design. Due to effective energy performance in buildings the new technology and applications also in daylight engineering are sought such as tubular light guides. These allow the transport of natural light into the building core reducing energy consumption. A lot of installations with various geometrical and optical properties can be applied in real buildings. The simplest set of tubular light guide consists of a transparent cupola, direct tube with high reflected inner surface and a ceiling cover or diffuser redistributing light into the interior. Such vertical tubular guide is often used on flat roofs. When the roof construction is inclined a bend in the light guide system has to be installed. In this case the cupola is set on the sloped roof which collects sunlight and skylight from the seen part of the sky hemisphere as well as that reflected from the ground and opposite facades. In comparison with the vertical tube some additional light losses and distortions of the propagated light have to be expected in bended tubular light guides. Recently the theoretical model of light propagation was already published and its applications are presented in this study solving illuminance distributions on the ceiling cover interface and further illuminance distribution on the working plane in the interior. (author)

Darula, Stanislav; Kocifaj, Miroslav; Kittler, Richard [ICA, Slovak Academy of Sciences, Bratislava (Slovakia); Kundracik, Frantisek [Department of Experimental Physics, FMPI, Comenius University, Bratislava (Slovakia)

2010-12-15T23:59:59.000Z

69

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science Applied Science Correlation of predicted and measured iron oxidation states in mixed iron oxides H. D. Rosenfeld and W. L. Holstein Development of a quantitative measurement of a diesel spray core using synchrotron x-rays C.F. Powell, Y. Yue, S. Gupta, A. McPherson, R. Poola, and J. Wang Localized phase transformations by x-ray-induced heating R.A. Rosenberg, Q. Ma, W. Farrell, E.D. Crozier, G.J. Soerensen, R.A. Gordon, and D.-T. Jiang Resonant x-ray scattering at the Se edge in ferroelectric liquid crystal materials L. Matkin, H. Gleeson, R. Pindak, P. Mach, C. Huang, G. Srajer, and J. Pollmann Synchrotron-radiation-induced anisotropic wet etching of GaAs Q. Ma, D.C. Mancini, and R.A. Rosenberg Synchrotron-radiation-induced, selective-area deposition of gold on

70

THE PROMISE OF SOLID STATE LIGHTING FOR GENERAL ILLUMINATION  

NLE Websites -- All DOE Office Websites (Extended Search)

Conclusions and Recommendations Conclusions and Recommendations from OIDA Technology Roadmaps Co-sponsored by DOE (BTS) and OIDA OIDA OPTOELECTRONICS INDUSTRY DEVELOPMENT ASSOCIATION 1133 Connecticut Avenue, NW Suite 600 Washington, DC 20036 Ph: (202) 785-4426 Fax: (202) 785-4428 Web: http://www.OIDA.org Building Technology, State and Community Programs Energy Efficiency and Renewable Energy U.S. Department of Energy Published by: Optoelectronics Industry Development Association 1133 Connecticut Avenue NW, Suite 600 Washington, DC 20036 Phone: (202) 785-4426 Fax: (202) 785-4428 Internet: http://www.oida.org 1 The Promise of Solid State Lighting for General Illumination s Light Emitting Diodes (LEDs) © 2001 Optoelectronics Industry Development Association Executive Summary In the midst of the rising fuel prices and the blackouts in California there is silent rev-

71

Boldly Illuminating Biology's "Dark Matter"  

NLE Websites -- All DOE Office Websites (Extended Search)

14, 2013 14, 2013 Boldly Illuminating Biology's "Dark Matter" Is space really the final frontier, or are the greatest mysteries closer to home? In cosmology, dark matter is said to account for the majority of mass in the universe, however its presence is inferred by indirect effects rather than detected through telescopes. The biological equivalent is "microbial dark matter," that pervasive yet practically invisible infrastructure of life on the planet, which can have profound influences on the most significant environmental processes from plant growth and health, to nutrient cycles in terrestrial and marine environments, the global carbon cycle, and possibly even climate processes. By employing next generation DNA sequencing of genomes isolated from single cells, great

72

PHOTOINDUCED CURRENTS IN CDZNTE CRYSTALS AS A FUNCTION OF ILLUMINATION WAVELENGTH  

SciTech Connect

We report variations in the currents of CdZnTe semiconductor crystals during exposure to a series of light emitting diodes of various wavelengths ranging from 470 to 950 nm. The changes in the steady-state current of one CdZnTe crystal with and without illumination along with the time dependence of the illumination effects are discussed. Analysis of the de-trapping and transient bulk currents during and after optical excitation yield insight into the behaviour of charge traps within the crystal. Similar behaviour is observed for illumination of a second CdZnTe crystal suggesting that the overall illumination effects are not crystal dependent.

Teague, L.; Washington, A.; Duff, M.

2012-04-23T23:59:59.000Z

73

An efficient illumination framework for web-based lighting engineering education  

Science Conference Proceedings (OSTI)

Although the interactive web-based learning environment enriches the study of lighting engineering, it relies healthy on realistic rendering and illumination calculations of 3D scenes. These operations are typically very expensive in kernel computations ... Keywords: dynamic scenes, global illumination, lighting engineering, web-based learning

Hui Xiao; Rynson W. H. Lau; Gary Tam

2006-07-01T23:59:59.000Z

74

Real-time robust background subtraction under rapidly changing illumination conditions  

Science Conference Proceedings (OSTI)

Fast robust background subtraction under sudden lighting changes is a challenging problem in many applications. In this paper, we propose a real-time approach, which combines the Eigenbackground and Statistical Illumination method to address this issue. ... Keywords: Background subtraction, EM, Eigenbackground, Illumination changes

Luc Vosters; Caifeng Shan; Tommaso Gritti

2012-12-01T23:59:59.000Z

75

Demonstration of Recessed Downlight Technologies: Power and Illumination Assessment  

SciTech Connect

Solid state lighting (SSL), specifically light-emitting diodes (LED), has been advancing at a rapid pace, and there are presently multiple products available that serve as direct replacements for traditional luminaires. In this demonstration, conventional recessed lights in a conference room were used to compare conventional incandescent A-lamps, incandescent reflector R-lamps, dimming compact fluorescent lamps (CFL), to an LED replacement product. The primary focus during the study was on light delivered to the task plane as provided by the power required by the lighting system. Vertical illuminance, dimming range, and color shift are also important indicators of lighting quality and are discussed in the report. The results clearly showed that LEDs, with dimming-capable drivers, are much more efficient than incandescent and CFLs. Further, LEDs provide much smoother and consistent dimming than dimmable CFLs. On the potential negative side, it is important that the dimming switch be identified as compatible with the LED driver. A wide variety of dimmer switches are capable of dimming LEDs down to 15% of full light output, while select others can be capable of dimming LEDs down to 5%. In addition, LEDs can be intensive light sources, which can result in uncomfortable glare in some applications and to some occupants. Higher ceiling (9-foot or greater) or non-specular reflectors can act to alleviate the potential for glare.

Parker, Steven A.; Beeson, Tracy A.

2009-11-20T23:59:59.000Z

76

CX-001037: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Categorical Exclusion Determination CX-001037: Categorical Exclusion Determination Low-Cost Illumination Grade Light Emitting Diodes (LEDs) CX(s) Applied: B3.6, B5.1 Date: 03...

77

Effect of Sub-Bandgap Illumination on the Internal Electric Field of CdZnTe  

SciTech Connect

Post-growth manipulation of the internal electric field in CdZnTe crystals using sub-bandgap illumination is measured as a function of temperature through infrared (IR) transmission measurements. Using near sub-bandgap IR illumination, both the optical de-trapping of charge carriers and the reduction in carrier recombination increased the mobility lifetime in the crystal. The increased carrier transport is a direct result of decreased hole and electron trapping in addition to other underlying mechanisms. Concentration of the electric field near the cathode is also observed. We measured the electric field distribution with sub-bandgap illumination as a function of temperature via the Pockels effect.

Washington, A.

2011-09-16T23:59:59.000Z

78

Detection of Single Molecules Illuminated by a Light-Emitting Diode  

E-Print Network (OSTI)

Optical detection and spectroscopy of single molecules has become an indispensable tool in biological imaging and sensing. Its success is based on fluorescence of organic dye molecules under carefully engineered laser illumination. In this paper we demonstrate optical detection of single molecules on a wide-field microscope with an illumination based on a commercially available, green light-emitting diode. The results are directly compared with laser illumination in the same experimental configuration. The setup and the limiting factors, such as light transfer to the sample, spectral filtering and the resulting signal-to-noise ratio are discussed. A theoretical and an experimental approach to estimate these parameters are presented. The results can be adapted to other single emitter and illumination schemes.

Ilja Gerhardt; Lijian Mai; Antia Lamas-Linares; Christian Kurtsiefer

2011-01-14T23:59:59.000Z

79

Illuminating system and method for specialized and decorative lighting using liquid light guides  

DOE Patents (OSTI)

The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools.

Zorn, Carl J. (Yorktown, VA); Kross, Brian J. (Yorktown, VA); Majewski, Stanislaw (Grafton, VA); Wojcik, Randolph F. (Yorktown, VA)

1998-01-01T23:59:59.000Z

80

Plasma lighting, fiber optics, and daylight collectors: Toward the next revolution in high-efficiency illumination  

SciTech Connect

Combining three recently marketed innovations may provide the next revolution in illumination, making many other recent advances eventually obsolete. The first is plasma lighting, pioneered by Fusion Lighting Inc. of Rockville, Maryland, and first commercially applied by Hutchins International Ltd. of Mississauga, Ontario. This microwave-generated light source yields very high-quality light with efficacies at or beyond high intensity discharge (HID) lamps. The source uses no mercury, thus eliminating lamp disposal problems, and has no cathode, thereby providing very long lamp life. Using no phosphors, it also has very short start and re-strike periods, and is dimmable. The second innovation is in the distribution of light. Commercial developments in fiber optics and light guides now provide products that transfer light from a remote point and distribute it like standard light fixtures. Advances in fiber optic communications and applications to decorative lighting have supplied relatively economical systems for mounting and directing light from both electric light sources and the sun. The third advance is a result of efforts to harness daylight. Unlike architectural daylighting that directs sunlight into perimeter areas through glazing, daylight collectors are roof-mounted devices that supply light to interior and underground spaces through hollow columns and open chases. Aided by improvements and cost reductions in sun-tracking (i.e., heliostatic) controls that capture and concentrate sunlight, such collectors offer a source of free light to locations that might otherwise never receive it. When combined together, these three options could offer a centralized building lighting system that pipes lumens to distribution devices replacing many existing lamps and fixtures.

Audin, L. [Columbia Univ., New York, NY (United States)

1995-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Communications and sensing of illumination contributions in a power led lighting system  

E-Print Network (OSTI)

Abstract In recent years, LED technology emerged as a prime candidate for the future illumination light source, due to high energy efficiency and long life time. In addition, LEDs offer a superior flexibility in terms of colors and shapes, which leads to a potentially infinite variety of available light patterns. In order to create these patterns via easy user interaction, we need to sense the local light contribution of each LED. This measurement could be enabled through tagging of the light of each LED with unique embedded IDs. To this end, we propose a new modulation and multiple access scheme, named as codetime division multiple access- pulse position modulation (CTDMA-PPM): a form of PPM which is keyed according to a spreading sequence, and in which the duty cycle is subject to pulse width modulation (PWM) according to the required lighting setting. Our scheme considers illumination constraints in addition to the communication requirements and, to our best knowledge, it has not been addressed by other optical modulation methods. Based on the proposed modulation method and multiple access schemes, we develop a system structure, which includes illumination sources, a sensor receiver and a control system. Illumination sources illuminate the environment and transmit information, simultaneously. According to our theoretical analysis, this system structure could support a number of luminaries equal to the size of the CDMA codebook times the dimming range. I.

Jean-paul M. G. Linnartz; Lorenzo Feri; Hongming Yang; Sel B. Colak; Tim C. W. Schenk

2008-01-01T23:59:59.000Z

82

Illumination Sufficiency Survey Techniques: In-situ Measurements of Lighting System Performance and a User Preference Survey for Illuminance in an Off-Grid, African Setting  

Science Conference Proceedings (OSTI)

Efforts to promote rechargeable electric lighting as a replacement for fuel-based light sources in developing countries are typically predicated on the notion that lighting service levels can be maintained or improved while reducing the costs and environmental impacts of existing practices. However, the extremely low incomes of those who depend on fuel-based lighting create a need to balance the hypothetically possible or desirable levels of light with those that are sufficient and affordable. In a pilot study of four night vendors in Kenya, we document a field technique we developed to simultaneously measure the effectiveness of lighting service provided by a lighting system and conduct a survey of lighting service demand by end-users. We took gridded illuminance measurements across each vendor's working and selling area, with users indicating the sufficiency of light at each point. User light sources included a mix of kerosene-fueled hurricane lanterns, pressure lamps, and LED lanterns.We observed illuminance levels ranging from just above zero to 150 lux. The LED systems markedly improved the lighting service levels over those provided by kerosene-fueled hurricane lanterns. Users reported that the minimum acceptable threshold was about 2 lux. The results also indicated that the LED lamps in use by the subjects did not always provide sufficient illumination over the desired retail areas. Our sample size is much too small, however, to reach any conclusions about requirements in the broader population. Given the small number of subjects and very specific type of user, our results should be regarded as indicative rather than conclusive. We recommend replicating the method at larger scales and across a variety of user types and contexts. Policymakers should revisit the subject of recommended illuminance levels regularly as LED technology advances and the price/service balance point evolves.

Alstone, Peter; Jacobson, Arne; Mills, Evan

2010-08-26T23:59:59.000Z

83

Solar LED Light Pilot Project Illuminates the Way in Alabama | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar LED Light Pilot Project Illuminates the Way in Alabama Solar LED Light Pilot Project Illuminates the Way in Alabama Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Tertia Speiser Project Officer, Golden Field Office "I want to invite everyone to come to Boaz and see the future of responsible highway lighting and power generation." -Boaz Mayor Tim Walker

84

Solar LED Light Pilot Project Illuminates the Way in Alabama | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Light Pilot Project Illuminates the Way in Alabama LED Light Pilot Project Illuminates the Way in Alabama Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Tertia Speiser Project Officer, Golden Field Office "I want to invite everyone to come to Boaz and see the future of responsible highway lighting and power generation." -Boaz Mayor Tim Walker

85

Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps  

Science Conference Proceedings (OSTI)

Creation of light for work, socializing, and general illumination is a fundamental application of technology around the world. For those who lack access to electricity, an emerging and diverse range of LED based lighting products hold promise for replacing and/or augmenting their current fuel-based lighting sources that are costly and dirty. Along with analysis of environmental factors, economic models for total cost-ofownership of LED lighting products are an important tool for studying the impacts of these products as they emerge in markets of developing countries. One important metric in those models is the minimum illuminance demanded by end-users for a given task before recharging the lamp or replacing batteries. It impacts the lighting service cost per unit time if charging is done with purchased electricity, batteries, or charging services. The concept is illustrated in figure 1: LED lighting products are generally brightest immediately after the battery is charged or replaced and the illuminance degrades as the battery is discharged. When a minimum threshold level of illuminance is reached, the operational time for the battery charge cycle is over. The cost to recharge depends on the method utilized; these include charging at a shop at a fixed price per charge, charging on personal grid connections, using solar chargers, and purchasing dry cell batteries. This Research Note reports on the observed"charge-triggering" illuminance level threshold for night market vendors who use LED lighting products to provide general and task oriented illumination. All the study participants charged with AC power, either at a fixed-price charge shop or with electricity at their home.

Johnstone, Peter; Jacobson, Arne; Mills, Evan; Radecsky, Kristen

2009-03-21T23:59:59.000Z

86

Applied Quantum Information Science  

Science Conference Proceedings (OSTI)

Applied Quantum Information Science. Summary: Theory is being developed and used to devise methods for preserving ...

2012-05-30T23:59:59.000Z

87

THE EFFECT OF SUBBANDGAP ILLUMINATION ON THE BULK RESISTIVITY OF CDZNTE  

SciTech Connect

The variation in bulk resistivity during infrared (IR) illumination above 950 nm of state-of-the-art CdZnTe (CZT) crystals grown using the traveling heating method or the modified Bridgman method is documented. The change in steady-state current with and without illumination is also evaluated. The influence of secondary phases (SP) on current?voltage (I?V) characteristics is discussed using IR transmission microscopy to determine the defect concentration within the crystal bulk. SP present within the CZT are connected to the existence of deep, IR-excitable traps within the bandgap.

Wright, J.; Washington, A.; Duff, M.; Burger, A.; Groza, M.; Buliga, V.

2013-08-13T23:59:59.000Z

88

Illuminating system and method for specialized and decorative lighting using liquid light guides  

DOE Patents (OSTI)

The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools. 5 figs.

Zorn, C.J.; Kross, B.J.; Majewski, S.; Wojcik, R.F.

1998-08-25T23:59:59.000Z

89

Procedure for calculating interior daylight illumination with a programmable hand calculator  

DOE Green Energy (OSTI)

A procedure is described for calculating interior daylight illumination using an inexpensive programmable hand calculator. The proposed procedure calculates illumination at any point within a room utilizing sky luminance distribution functions that are consistent with the CIE (Commission Internationale de l'Eclairage) Overcast and Clear Sky functions. This procedure separates the light reaching the point being considered into three components, these being (a) light directly from the sky, (b) light after being reflected from external, and (c) internal surfaces. Finally, two examples are presented in order to demonstrate the proposed procedure and indicate the speed with which the calculations may be performed.

Bryan, H.J.; Clear, R.D.

1980-10-01T23:59:59.000Z

90

Optical Design of Beam Shaping Optics for Camera Probe and LED Light Illumination Used for Minimally Invasive Abdominal Surgery.  

E-Print Network (OSTI)

??The optical design of a LED illuminator and camera imaging system were studied for potential use in a small medical "robotic type" probe to be (more)

He, Weiyi

2010-01-01T23:59:59.000Z

91

Optical Design of Beam Shaping Optics for Camera Probe and LED Light Illumination Used for Minimally Invasive Abdominal Surgery.  

E-Print Network (OSTI)

?? The optical design of a LED illuminator and camera imaging system were studied for potential use in a small medical "robotic type" probe to (more)

He, Weiyi

2011-01-01T23:59:59.000Z

92

Determining Generative Models of Objects Under Varying Illumination: Shape and Albedo from Multiple Images Using SVDand Integrability  

Science Conference Proceedings (OSTI)

We describe a method of learning generative models of objects from a set of images of the object under different, and unknown, illumination. Such a model allows us to approximate the objects appearance under a range of lighting conditions. ... Keywords: Singular Value Decomposition, illumination models, photometric stereo

A. L. Yuille; D. Snow; R. Epstein; P. N. Belhumeur

1999-12-01T23:59:59.000Z

93

UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation Into Renewable Energy: The Solar Canopy Illumination System  

E-Print Network (OSTI)

Into Renewable Energy: The Solar Canopy Illumination System Samuel Davies, Patrick Duvall, Timothy Russell Investigation Into Renewable Energy: The Solar Canopy Illumination System Samuel Davies Patrick Duvall Timothy of a building's energy usage, the solar canopy system is ideal for facilities, such as the new student union

94

SOUTHVIEWDR Center for Applied  

E-Print Network (OSTI)

/Geology Chemistry Biological Sciences Geology Lab Bookstore Reed Milledge Payne Memorial Hall SANFORD DR Center CAES Activity Center Visitors Center (Four Towers) Greenhouses Center for Applied Isotope Study

Hall, Daniel

95

Numerical modeling of the temperature illumination intensity dependent performance of CIS solar cells  

DOE Green Energy (OSTI)

In this paper, the temperature dependence of CIS solar cell illuminated I-V is studied numerically using ADEPT. The effects of having a second junction either at the interface or at the back contact are investigated. These two placements of the second junction result in two distinctive shapes of the I-V at low temperatures. Both of these distinctive shapes have been observed experimentally.

Lee, Y.J.; Gray, J.L. [Purdue Univ., Lafayette, IN (United States). School of Electrical Engineering

1994-12-31T23:59:59.000Z

96

Applied Energy Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Energy Programs Applied Energy Programs Applied Energy Programs Los Alamos is using its world-class scientific capabilities to enhance national energy security by developing energy sources with limited environmental impact and by improving the efficiency and reliability of the energy infrastructure. CONTACT US Acting Program Director Melissa Fox (505) 663-5538 Email Applied Energy Program Office serves as the hub connecting the Laboratory's scientific and technical resources to DOE sponsors, DoD programs, and to industry. The Applied Energy Program Office manages Los Alamos National Laboratory programs funded by the Department of Energy's (DOE's) Offices of Energy Efficiency/Renewable Energy, Electricity Delivery and Energy Reliability, and Fossil Energy. With energy use increasing across the nation and the

97

Essays in applied microeconomics  

E-Print Network (OSTI)

This dissertation consists of three chapters on topics in applied microeconomics. In the first chapter. I investigate whether voters are more likely to support additional spending on local public services when they perceive ...

Aron-Dine, Aviva

2012-01-01T23:59:59.000Z

98

Optimized polar-azimuthal orientations for polarized light illumination of different superconducting nanowire single-photon detector designs  

E-Print Network (OSTI)

The optimum orientations were determined for polarized light illumination of three superconducting nanowire single-photon detector (SNSPD) designs consisting of niobium-nitride (NbN) stripes with dimensions according to ...

Csete, Maria

99

Nocturnal Photographs Taken from a U-2 Airplane Looking Down on Tops of Clouds Illuminated by Lightning  

Science Conference Proceedings (OSTI)

Photographs have been taken at night from an airplane at an altitude of 20 km looking directly down on the tops of thunderclouds illuminated by lightning. The hard, cauliflower-like appearance of the clouds gives evidence that strong convective ...

B. Vonnegut; O. H. Vaughan Jr.; M. Brook

1989-10-01T23:59:59.000Z

100

Solid-state semiconductors are better alternatives to arc-lamps for efficient and uniform illumination in minimal access surgery  

E-Print Network (OSTI)

of technical and ergonomic limitations. White light-emitting diodes (LEDs) are energy-efficient solid- state Illumination Á Light-emitting diode Á Minimal access surgery Á Solid-state semiconductor In the 1950s

Rosso, Lula

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Applied Mathematics | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Mathematics Applied Mathematics Our work in applied mathematics ranges from algorithm design, to development of software tools and technology, to advanced simulations in...

102

Applied Science/Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science/Techniques Applied Science/Techniques Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

103

Innovative Development of Next Generation and Energy Efficient Solid State Light Sources for General Illumination  

SciTech Connect

This two year program resulted in a novel broadband spectrally dynamic solid state illumination source (BSDLED) that uses a dual wavelength light emitting diode (LED) and combinations of phosphors to create a broadband emission that is real-time controllable. Four major focuses of this work were as follows: (1) creation of a two terminal dual wavelength LED with control of the relative intensities of the two emission peaks, (2) bandgap modeling of the two terminal dual LED to explain operation based on the doping profile, (3) novel use of phosphor combinations with dual LEDs to create a broadband spectral power distribution that can be varied to mimic a blackbody radiator over a certain range and (4) investigation of novel doping schemes to create tunnel junctions or equivalent buried current spreading layers in the III-nitrides. Advances were achieved in each of these four areas which could lead to more efficient solid state light sources with greater functionality over existing devices. The two-terminal BSDLED is an important innovation for the solid-state lighting industry as a variable spectrum source. A three-terminal dual emitter was also investigated and appears to be the most viable approach for future spectrally dynamic solid state lighting sources. However, at this time reabsorption of emission between the two active regions limits the usefulness of this device for illumination applications.

Ian Ferguson

2006-07-31T23:59:59.000Z

104

Applied Science/Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science/Techniques Print Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

105

Solution-Procesed Small-Molecule OLED Luminaire for Interior Illumination  

Science Conference Proceedings (OSTI)

Prototype lighting panels and luminaires were fabricated using DuPont Displays?? solution-processed small-molecule OLED technology. These lighting panels were based on a spatially-patterned, 3-color design, similar in concept to an OLED display panel, with materials chosen to maximize device efficacy. The majority of the processing steps take place in air (rather than high vacuum). Optimization of device architecture, processing and construction was undertaken, with a final prototype design of 50 cm{sup 2} being fabricated and tested. Performance of these panels reached 35 lm/W at illuminant-A. A unique feature of this technology is the ability to color tune the emission, and color temperatures ranging from 2700 to > 6,500K were attained in the final build. Significant attention was paid to low-cost fabrication techniques.

Parker, Ian

2012-02-29T23:59:59.000Z

106

Applied antineutrino physics workshop.  

Science Conference Proceedings (OSTI)

This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river.

Lund, James C.

2008-01-01T23:59:59.000Z

107

Applied and Computational Mathematics Division  

Science Conference Proceedings (OSTI)

Applied and Computational Mathematics Division. Topic Areas. Mathematics; Scientific Computing; Visualization; Quantum Computing. ...

2013-05-09T23:59:59.000Z

108

Soil surface illumination at micro-relief scale and soil BRDF data collected by a hyperspectral camera  

Science Conference Proceedings (OSTI)

The results of the paper draw attention to the fact that the hyperspectral image of soil surface at micro-relief scale may display variation in the soil spectral shape due to illumination conditions of the surface. The image of an extremely rough cultivated ...

Jerzy Cierniewski; Arnon Karnieli; Ittai Herrmann; S?awomir Krolewicz; Krzysztof Ku?nierek

2010-03-01T23:59:59.000Z

109

STcorr: An IDL code for image based normalization of lapse rate and illumination effects on nighttime TIR imagery  

Science Conference Proceedings (OSTI)

Thermal infrared imagery (TIR) is a useful tool to detect and quantify the surface temperature anomalies associated with geothermal fields. Accurate detection of anomalies in surface temperature is an important aspect of geothermal research. Although ... Keywords: ASTER, Illumination, Nemrut volcano, Normalization, Thermal infrared, Topographic

?Nan Ulusoy; Philippe Labazuy; Erkan Aydar

2012-06-01T23:59:59.000Z

110

An overview of an illuminator of opportunity passive radar research project and its signal processing research directions  

Science Conference Proceedings (OSTI)

In this paper, an overview of an Illuminator Of Opportunity (IOO) passive radar research project being conducted at DSTO is presented, with a specific focus on the signal processing research directions that are being investigated. The overview provides ... Keywords: Bistatic radar, Passive coherent location

J. Palmer; S. Palumbo; A. Summers; D. Merrett; S. Searle; S. Howard

2011-09-01T23:59:59.000Z

111

Overcoming Degradation in Organic Photovoltaics: Illuminating the Role of Fullerene Functionalization: Preprint  

DOE Green Energy (OSTI)

Photobleaching rates are investigated for thin films of poly(3-hexylthiophene) (P3HT) blends employing either an indene-C60 bisadduct (ICBA) or [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as the electron acceptor. Relative to the bisindene, PCBM significantly enhances resistance to photobleaching of the P3HT donor polymer. We tentatively attribute a decrease in the charge transfer rate as the mechanism responsible for the more rapid photobleaching in the sample containing the bisindene adduct. In order to elucidate the influence of the photobleaching rate on the initial performance of unencapsulated devices, we also monitored the time-dependent behavior for P3HT:fullerene inverted devices. Under conditions of constant illumination, we observe essentially identical behavior in device performance parameters regardless of the energy levels of the electron acceptor. We conclude that over the time frame measured for these devices, the primary degradation mechanism of the active layer is independent of the electron acceptor, despite the enhanced tolerance to photobleaching it may impart to the donor material.

Lloyd, M. T.; Garcia, A.; Berry, J. J.; Reese, M. O.; Ginley, D. S.; Olson, D. C.

2011-07-01T23:59:59.000Z

112

Applied Optoelectronics | Open Energy Information  

Open Energy Info (EERE)

optical semiconductor devices, packaged optical components, optical subsystems, laser transmitters, and fiber optic transceivers. References Applied Optoelectronics1...

113

NFRC Procedures for Applied Films  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Films Applied Films Last update: 12/10/2013 07:29 PM NFRC now has a procedure for adding applied films to substrates in Optics5 and importing those applied film constructions into WINDOW5 to be used in a whole product calculation. The information presented below is provided to help simulators with this process. Feel free to contact us at WINDOWHelp@lbl.gov with questions or comments. NFRC Applied Film Procedure Applied Film Procedures (approved by NFRC) (PDF file) Approved Applied Film List (IGDB 33.0) (PDF file) NFRC Laminate Procedure Training Powerpoint with Examples (This Powerpoint presentation was used in the NFRC web based training sessions in December 2006 and January 2007) PowerPoint Presentation (PPT file) PowerPoint Presentation (PDF file) Help and Troubleshooting

114

Normalization of the scattered light from an isolated defect illuminated by a Gaussian beam  

SciTech Connect

The intensity distribution of the beam from a laser operated in the zero order configuration for the transverse electromagnetic field (TEM/sub 00/ mode) is Gaussian in a plane perpendicular to the axis of the beam. In some applications it is desirable to have a uniform intensity over a certain region in space. For example, when a Gaussian beam is incident on a smooth surface containing small isolated defects, the light scattered by a defect will depend on the position of the defect relative to the center of the beam. In the past, several techniques have been devised to convert a Gaussian intensity profile into a uniform intensity over a specified region in space. In the present work a different approach is taken. A method of normalization is described which makes direct use of the Gaussian intensity distribution of the TEM/sub 00/ mode. By this method the amount of light scattered by a defect can be normalized to the value which would be observed if the defect were located at the center of the beam, for a defect small in size compared with the 1/e/sup 2/ diameter of the Gaussian profile. The normalization requires that three measurements be made of the scattering by the defect for an arbitrary location of the defect relative to the center of the Gaussian beam, and that the 1/e/sup 2/ radius of the Gaussian beam and the interval between adjacent illuminated spots on the surface are known. Experimental data verifying the theory were obtained from isolated defects on a superfinished spherical surface.

Klingsporn, P.E.

1980-07-01T23:59:59.000Z

115

An Energy-Stabilized Varied-Line-Space-Monochromator UndulatorBeam Line for PEEM Illumination and Magnetic Circular Dichroism  

Science Conference Proceedings (OSTI)

A new undulator beam line has been built and commissioned at the Advanced Light Source for illumination of the PEEM3 microscope. The beam line delivers high flux beams over an energy range from C1s through the transition metals to include the M edges of the magnetic rare earth elements. We present details of the optical design, and data on the performance of the zero-order tracking of the photon energy.

Warwick, Tony; McKinney, Wayne; Domning, Ed; Doran, Andrew; Padmore, Howard

2006-06-01T23:59:59.000Z

116

Nonimaging solar energy concentrators (CPC's) with fully illuminated flat receivers: A viable alternative to flat-plate collectors  

SciTech Connect

Low-concentration, stationary, nonimaging concentrators (CPC's) with flat receivers illuminated on both sides are considered as viable alternatives to flat-plate solar collectors. Closed-form, analytic formulae are derived for the geometric characteristics of two concentrator types of greatest interest (i.e., stationary collectors for year-round energy delivery), which enable calculations of collectible energy without computer ray-tracing stimulations. The relative merits of these concentrators in terms of energy collection and production costs are assessed with respect to each other as well as to flat-plate collectors.

Gordon, J.M.

1986-08-01T23:59:59.000Z

117

Vehicle Technologies Office: Applied Battery Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Battery Research to someone by E-mail Share Vehicle Technologies Office: Applied Battery Research on Facebook Tweet about Vehicle Technologies Office: Applied Battery...

118

BNL | Accelerators for Applied Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Accelerators for Applied Research Accelerators for Applied Research Brookhaven National Lab operates several accelerator facilities dedicated to applied research. These facilities directly address questions and concerns on a tremendous range of fields, including medical imaging, cancer therapy, computation, and space exploration. Leading scientists lend their expertise to these accelerators and offer crucial assistant to collaborating researchers, pushing the limits of science and technology. Interested in gaining access to these facilities for research? See the contact number listed for each facility. RHIC tunnel Brookhaven Linac Isotope Producer The Brookhaven Linac Isoptope Producer (BLIP)-positioned at the forefront of research into radioisotopes used in cancer treatment and diagnosis-produces commercially unavailable radioisotopes for use by the

119

CRC handbook of applied thermodynamics  

Science Conference Proceedings (OSTI)

The emphasis of this book is on applied thermodynamics, featuring the stage of development of a process rather than the logical development of thermodynamic principles. It is organized according to the types of problems encountered in industry, such as probing research, process assessment, and process development. The applied principles presented can be used in most areas of industry including oil and gas production and processing, chemical processing, power generation, polymer production, food processing, synthetic fuels production, specialty chemicals and pharmaceuticals production, bioengineered processes, etc.

Palmer, D.A. (Amoco Chemical Corp., Naperville, IL (USA). Research and Development Dept.)

1987-01-01T23:59:59.000Z

120

Method for ultrafast optical deflection enabling optical recording via serrated or graded light illumination  

DOE Patents (OSTI)

In one general embodiment, a method for deflecting an optical signal input into a waveguide is provided. In operation, an optical input signal is propagated through a waveguide. Additionally, an optical control signal is applied to a mask positioned relative to the waveguide such that the application of the optical control signal to the mask is used to influence the optical input signal propagating in the waveguide. Furthermore, the deflected optical input signal output from the waveguide is detected in parallel on an array of detectors. In another general embodiment, a beam deflecting structure is provided for deflecting an optical signal input into a waveguide, the structure comprising at least one wave guiding layer for guiding an optical input signal and at least one masking layer including a pattern configured to influence characteristics of a material of the guiding layer when an optical control signal is passed through the masking layer in a direction of the guiding layer. In another general embodiment, a system is provided including a waveguide, an attenuating mask positioned on the waveguide, and an optical control source positioned to propagate pulsed laser light towards the attenuating mask and the waveguide such that a pattern of the attenuating mask is applied to the waveguide and material properties of at least a portion of the waveguide are influenced.

Heebner, John E. (Livermore, CA)

2009-09-08T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

California Energy Commission Apply Today!  

E-Print Network (OSTI)

photovoltaic project in the future. Peak Demand Savings: 95 kW Energy Savings: 1,510,849 kWh Annual Energy CostCalifornia Energy Commission Apply Today! "The College implemented all of the recommended projects Programs Office (916) 654-4147 pubprog@energy.state.ca.us "CEC financing allowed us to install many

122

implementing bioenergy applied research & development  

E-Print Network (OSTI)

1 A Northern Centre for Renewable Energy implementing bioenergy applied research & development plant measures to become carbon neutral and operate on renewable energy. UNBC is uniquely positioned for Climate Solutions, and UNBC. The Green University Centre will be a model of energy efficiency

Northern British Columbia, University of

123

Regioselective isotopic exchange between propane and deuterium over illuminated Pt/TiO/sub 2/ catalyst below room temperature  

SciTech Connect

Propane-deuterium isotopic exchange over an illuminated (300-410 nm) 0.5 wt% Pt/TiO/sub 2/ (anatase) catalyst was carried out at 263 K with a C/sub 3/H/sub 8//D/sub 2/ ratio of 1/15. An initial selectivity of 100% in monodeuteropropane was found with a nonoptimized quantum yield of ca. 0.01. By analogy with previous studies dealing with cyclopentane instead of propane, the photocatalytic mechanism is based on the activation of the deuteroxyl OD/sup -/ groups of titania, which are neutralized by the photoproduced holes and subsequently react with weakly adsorbed propane molecules, thus exchanging one hydrogen atom per period of adsorption. The monoexchange concerned predominantly the primary hydrogen atoms. Long-duration experiments, performed in a static photoreactor, indicated that the secondary H atoms exhibit, under these conditions, a much slower exchange rate, which induces the regioselectivity.

Herrmann, J.M.; Courbon, H.; Pichat, P.

1987-12-01T23:59:59.000Z

124

Transparent selective illumination means suitable for use in optically activated electrical switches and optically activated electrical switches constructed using same  

DOE Patents (OSTI)

A planar transparent light conducting means and an improved optically activated electrical switch made using the novel light conducting means are disclosed. The light conducting means further comprise light scattering means on one or more opposite planar surfaces thereof to transmit light from the light conducting means into adjacent media and reflective means on other surfaces of the light conducting means not containing the light scattering means. The optically activated electrical switch comprises at least two stacked photoconductive wafers, each having electrodes formed on both surfaces thereof, and separated by the planar transparent light conducting means. The light scattering means on the light conducting means face surfaces of the wafers not covered by the electrodes to transmit light from the light conducting means into the photoconductive wafers to uniformly illuminate and activate the switch.

Wilcox, Russell B. (Oakland, CA)

1991-01-01T23:59:59.000Z

125

EERE Postdoctoral Research Awards: How to Apply  

NLE Websites -- All DOE Office Websites (Extended Search)

How to Apply to someone by E-mail Share EERE Postdoctoral Research Awards: How to Apply on Facebook Tweet about EERE Postdoctoral Research Awards: How to Apply on Twitter Bookmark...

126

THREE ESSAYS ON APPLIED ECONOMICS  

E-Print Network (OSTI)

In this dissertation three essays were presented. In the first two essays we measure the consumer welfare changes caused by U.S. meat price changes. In the third essay the dynamic structure of international gasoline prices using the time series methodology is investigated. In chapter II, we investigate the U.S. consumer behavior on meat consumption depending on a linear expenditure system (LES), and then we simulate the welfare effects of a set of price changes on the U.S. meat consumption. The simulation results show that the amount of consumer welfare change for each meat is not same across the meats under the same percentage change of price. The simulation results also show that when all the prices are doubled the total amount of CV reaches almost the same amount of current total quarterly expenditures for the three meats. In chapter III, we apply the compensating variation (CV) approach for the measurement of consumer welfare losses associated with beef price changes. We applied the long-run cointegrating relationship in vector error correction model (VECM) to estimate the Marshallian demand function. Apparently, the use of long-run cointegration in VECM in deriving the direct Marshallian demand function to measure the consumer welfare change is the first attempt in the literature. This is one of the contributions of the study. The simulation results show that the amount of consumer welfare change for beef is compatible with the one derived from LES methodology. In chapter IV, an empirical framework to summarize the interdependence of four international gasoline markets (New York, U.S. Gulf Coast, Rotterdam and Singapore) is presented. For that purpose, we employ a structural VECM and directed acyclic graphs (DAGs). To solve the identification problem in structural VECM, we apply DAGs derived from contemporaneous VECM innovations. The impulse response functions show that the time period in which a shock in a market affects the other market is very short. Forecast error variance decompositions (FEVD) shows that in all markets, except the U.S. Gulf Coast market, current and past shocks in their own market explained the most of the volatility in their own market in the Short-run.

Shin, Sang-Cheol

2008-08-01T23:59:59.000Z

127

Applied Materials | Open Energy Information  

Open Energy Info (EERE)

Materials Materials Jump to: navigation, search Name Applied Materials Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Sector Solar Stock Symbol AMAT Website http://www.appliedmaterials.co Coordinates 37.3775749°, -121.9794416° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.3775749,"lon":-121.9794416,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

128

Weatherization and Intergovernmental Program: Apply for Weatherization  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply Apply for Weatherization Assistance to someone by E-mail Share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Facebook Tweet about Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Twitter Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Google Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Delicious Rank Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Digg Find More places to share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on AddThis.com... Plans, Implementation, & Results Weatherization Assistance Program Weatherization Services

129

Vehicle Technologies Office: Applied Battery Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Battery Research Applied battery research addresses the barriers facing the lithium-ion systems that are closest to meeting the technical energy and power requirements for...

130

Comparison of the spectral response of a thinned, backside illuminated CCD with a CsI coated MCP system and Kodak 101 film  

Science Conference Proceedings (OSTI)

A thinned backside illuminated CCD chip was calibrated by self consistently determining the thickness of its dead layer. Its spectral response and sensitivity were then compared with those of the calibrated Kodak 101 photographic plates and of a CsI coated microchannel plate detection system.

Li Yuelin; Crespo Lopex-Urrutia, J. R.; Tsakiris, G. D.; Sigel, R.; Volk, R.; Pina, L. [Max-Planck Institut fuer Quantenoptik, 85748, Garching (Germany); Czech Technical University, 18040 Prague (Czech Republic)

1995-05-01T23:59:59.000Z

131

DARPA Learning Applied to Ground Robots (LAGR)  

Science Conference Proceedings (OSTI)

DARPA Learning Applied to Ground Robots (LAGR) Project (Concluded). Summary: The National Institute of Standards ...

2012-01-04T23:59:59.000Z

132

Categorical Exclusion Determinations: B5.1 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 2010 5, 2010 CX-006103: Categorical Exclusion Determination California-City-San Clemente CX(s) Applied: A1, A9, A11, B1.32, B5.1 Date: 03/05/2010 Location(s): San Clemente, California Office(s): Energy Efficiency and Renewable Energy March 5, 2010 CX-001136: Categorical Exclusion Determination 130 Lumens Per Watt 1000 Lumen Warm White LEDs (Light-Emitting Diodes) for Illumination CX(s) Applied: B3.6, B5.1 Date: 03/05/2010 Location(s): San Jose, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 5, 2010 CX-001099: Categorical Exclusion Determination Northwest Food Processors Association Energy Intensity Improvement Initiative: Three Short-Term Projects CX(s) Applied: A9, B5.1 Date: 03/05/2010 Location(s): Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

133

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2010 2, 2010 CX-001102: Categorical Exclusion Determination Recovery Act: Clemson University Wind Turbine Testing Facility CX(s) Applied: A9 Date: 03/02/2010 Location(s): North Charleston, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 2, 2010 CX-001037: Categorical Exclusion Determination Low-Cost Illumination Grade Light Emitting Diodes (LEDs) CX(s) Applied: B3.6, B5.1 Date: 03/02/2010 Location(s): San Jose, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 2, 2010 CX-001036: Categorical Exclusion Determination Solution Processable Transparent Conductive Hole Injection Electrode for Organic Light Emitting Diode (OLED) Solid State Lighting (Pennsylvania) CX(s) Applied: B3.6

134

California | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2010 2, 2010 CX-001037: Categorical Exclusion Determination Low-Cost Illumination Grade Light Emitting Diodes (LEDs) CX(s) Applied: B3.6, B5.1 Date: 03/02/2010 Location(s): San Jose, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 2, 2010 CX-001035: Categorical Exclusion Determination Solution Processable Transparent Conductive Hole Injection Electrode for Organic Light Emitting Diode (OLED) Solid State Lighting CX(s) Applied: B3.6 Date: 03/02/2010 Location(s): Sunnyvale, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 2, 2010 CX-001034: Categorical Exclusion Determination Recovery Act: Solar Reforming of Carbon Dioxide to Produce Diesel Fuel CX(s) Applied: B3.6

135

Categorical Exclusion Determinations: Office of Energy Efficiency and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2010 2, 2010 CX-001019: Categorical Exclusion Determination Development of an Autogas Network (Atlanta) CX(s) Applied: A9, B2.5, B3.6, B5.1 Date: 03/02/2010 Location(s): Atlanta, Georgia Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 2, 2010 CX-001102: Categorical Exclusion Determination Recovery Act: Clemson University Wind Turbine Testing Facility CX(s) Applied: A9 Date: 03/02/2010 Location(s): North Charleston, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 2, 2010 CX-001037: Categorical Exclusion Determination Low-Cost Illumination Grade Light Emitting Diodes (LEDs) CX(s) Applied: B3.6, B5.1 Date: 03/02/2010 Location(s): San Jose, California Office(s): Energy Efficiency and Renewable Energy, National Energy

136

Categorical Exclusion Determinations: B3.6 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2010 2, 2010 CX-001130: Categorical Exclusion Determination Explosives Stabilization Testing CX(s) Applied: B3.6 Date: 03/02/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 2, 2010 CX-001037: Categorical Exclusion Determination Low-Cost Illumination Grade Light Emitting Diodes (LEDs) CX(s) Applied: B3.6, B5.1 Date: 03/02/2010 Location(s): San Jose, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 2, 2010 CX-001036: Categorical Exclusion Determination Solution Processable Transparent Conductive Hole Injection Electrode for Organic Light Emitting Diode (OLED) Solid State Lighting (Pennsylvania) CX(s) Applied: B3.6 Date: 03/02/2010 Location(s): Pittsburgh, Pennsylvania

137

X-ray lasers and methods utilizing two component driving illumination provided by optical laser means of relatively low energy and small physical size  

DOE Patents (OSTI)

An X-ray laser (10), and related methodology, are disclosed wherein an X-ray laser target (12) is illuminated with a first pulse of optical laser radiation (14) of relatively long duration having scarcely enough energy to produce a narrow and linear cool plasma of uniform composition (38). A second, relatively short pulse of optical laser radiation (18) is uniformly swept across the length, from end to end, of the plasma (38), at about the speed of light, to consecutively illuminate continuously succeeding portions of the plasma (38) with optical laser radiation having scarcely enough energy to heat, ionize, and invert them into the continuously succeeding portions of an X-ray gain medium. This inventive double pulse technique results in a saving of more than two orders of magnitude in driving optical laser energy, when compared to the conventional single pulse approach.

Rosen, Mordecai D. (Berkeley, CA); Matthews, Dennis L. (El Granada, CA)

1991-01-01T23:59:59.000Z

138

Oxidation Kinetics Modeling Applying Phase Field Approach  

Science Conference Proceedings (OSTI)

Presentation Title, Oxidation Kinetics Modeling Applying Phase Field Approach ... chemical reaction rates will increase exponentially and environmental attack...

139

Researcher, Los Alamos National Laboratory - Applied Physics...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Physics Division | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

140

Applied Chemicals and Materials Staff Directory  

Science Conference Proceedings (OSTI)

Applied Chemicals and Materials Staff Directory. ... accept either a name, organizational name, or ... MML Organization. Contact. Material Measurement ...

2012-10-12T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

CHEMICAL ENGINEERING SCHOOL OF ENGINEERING & APPLIED SCIENCE  

E-Print Network (OSTI)

30 CHEMICAL ENGINEERING SCHOOL OF ENGINEERING & APPLIED SCIENCE MIAMI UNIVERSITY 2005-2006 The program leads to the degree, Bachelor of Science in Applied Science, with a major in Chemical Engineering The chemical engineering students learn to apply the concepts of chemistry, biochemistry and biological science

Dollar, Anna

142

Fundamental & Applied Bioenergy | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

a new generation of efficient bioenergy strategies that will reduce U.S. dependence on foreign oil and help curb carbon emissions. Fundamental and applied bioenergy research at...

143

Applied Control Strategies at a Cogeneration Plant.  

E-Print Network (OSTI)

?? The purpose of this paper is to demonstrate the effectiveness of classical strategies for dynamic control on authentic cogeneration processes. These strategies are applied (more)

Burns, Joseph William

2011-01-01T23:59:59.000Z

144

Applied Quantum Technology AQT | Open Energy Information  

Open Energy Info (EERE)

AQT Jump to: navigation, search Name Applied Quantum Technology (AQT) Place Santa Clara, California Zip 95054 Product California-based manufacturer of CIGS (copper indium gallium...

145

DRAFT GUIDANCE Applying for Other Uses of  

E-Print Network (OSTI)

DRAFT GUIDANCE Applying for Other Uses of Phosphogypsum: Submitting a Complete Petition 40 CFR 61 Assignment 0-2 #12;Applying for Other Uses of Phosphogypsum: Submitting a Complete Petition Table of Contents phosphogypsum in stacks? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. What

146

Applied technology section. Monthly report, March 1994  

Science Conference Proceedings (OSTI)

This is a monthly report giving the details on research currently being conducted at the Savannah River Technology Center. The following are areas of the research, engineering modeling and simulation, applied statistics, applied physics,experimental thermal hydraulics,and packaging and transportation.

Buckner, M.R.

1994-04-20T23:59:59.000Z

147

Applied Materials Inc AMAT | Open Energy Information  

Open Energy Info (EERE)

Inc AMAT Inc AMAT Jump to: navigation, search Name Applied Materials Inc (AMAT) Place Santa Clara, California Zip 95052-8039 Sector Solar Product US-based manufacturer of equipment used in solar (silicon, thin-film, BIPV), semiconductor, and LCD markets. References Applied Materials Inc (AMAT)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Materials Inc (AMAT) is a company located in Santa Clara, California . References ↑ "Applied Materials Inc (AMAT)" Retrieved from "http://en.openei.org/w/index.php?title=Applied_Materials_Inc_AMAT&oldid=342244" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes

148

Applied Materials Wind Turbine | Open Energy Information  

Open Energy Info (EERE)

Wind Turbine Wind Turbine Jump to: navigation, search Name Applied Materials Wind Turbine Facility Applied Materials Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Applied Materials Developer Applied Materials Energy Purchaser Applied Materials Location Gloucester MA Coordinates 42.62895426°, -70.65153122° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.62895426,"lon":-70.65153122,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

149

Applied Field Research Initiative Deep Vadose Zone  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Applied Field Research Initiative Applied Field Research Initiative Deep Vadose Zone Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of preventing contamination in the deep vadose zone from reaching groundwater. Led by the Pacific Northwest National Laboratory, the Initiative is a collaborative effort that leverages Department of Energy (DOE) investments in basic science and applied research and the work of site contractors to address the complex deep vadose zone contamination challenges. Challenge Many vadose zone environments within the DOE complex consist of complex stratified layers of unconsolidated and water-unsaturated sediments that are, in many places, con-

150

Applying System Engineering to Pharmaceutical Safety  

E-Print Network (OSTI)

While engineering techniques are used in the development of medical devices and have been applied to individual healthcare processes, such as the use of checklists in surgery and ICUs, the application of system engineering ...

Couturier, Matthieu

151

Applied Information Security, 1st edition  

Science Conference Proceedings (OSTI)

Applied Information Security guides readers through the installation and basic operation of IT Security software used in the industry today. Dos Commands; Password Auditors; Data Recovery & Secure Deletion; Packet Sniffer; Port Scanners; Vulnerability ...

Randy Boyle

2009-07-01T23:59:59.000Z

152

Baldrige FAQs: Applying for the Award  

Science Conference Proceedings (OSTI)

... often use their feedback reports in their strategic planning processes to focus ... How long does it take to apply for the ... How long will it take to do a self ...

2013-05-21T23:59:59.000Z

153

Applied Virtual Intelligence in Oil & Gas Industry;  

E-Print Network (OSTI)

1 Applied Virtual Intelligence in Oil & Gas Industry; Past, Present, & Future Shahab D. Mohaghegh on a daily basis by almost everyone. Credit Card Fraud Detection Bank Loan Approval Bomb Sniffing Devices

Mohaghegh, Shahab

154

Applied Process Engineering Laboratory | Open Energy Information  

Open Energy Info (EERE)

Applied Process Engineering Laboratory Applied Process Engineering Laboratory Name Applied Process Engineering Laboratory Address 350 Hills Street, Suite #101 Place Richland, Washington Zip 99354 Region Pacific Northwest Area Coordinates 46.3389754°, -119.2716263° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.3389754,"lon":-119.2716263,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

155

Modeling International Relationships in Applied General Equilibrium  

Open Energy Info (EERE)

Modeling International Relationships in Applied General Equilibrium Modeling International Relationships in Applied General Equilibrium (MIRAGE) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Modeling International Relationships in Applied General Equilibrium (MIRAGE) Agency/Company /Organization: International Food Policy Research Institute, Centre d'Etudes Prospectives et d'Informations Internationales (CEPII) Focus Area: Economic Development Topics: Co-benefits assessment, - Macroeconomic Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Moderate Website: www.ifpri.org/book-5076/ourwork/program/mirage-model RelatedTo: Global Trade Analysis Project (GTAP) Data Base

156

How to Apply | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply How to Apply How to Apply Awards are made through a formal process that has changed dramatically since 2011. So let us walk you through it step by step. "Innovation pays." - John Kao, Innovation Nation Submit a Letter of Intent On October 28, 2013, the U.S. Department of Energy (DOE) announced on the DOE SBIR website a preview version of the technical topics for which it will later accept funding applications. These topics will be found on the DOE's Funding Opportunity Announcements page. The EE SBIR page lists those topics that are cleantech (specific to EERE). We also recommend that you sign up for the EE-SBIR and DOE-SBIR mailing lists. The EE SBIR mailing list signup is at https://public.govdelivery.com/accounts/USEERE/subscriber/new?topic_id=USEERE_442.

157

Applied Field Research Initiative Attenuation Based Remedies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PA00133 - March 2011 PA00133 - March 2011 Applied Field Research Initiative Attenuation Based Remedies in the Subsurface Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) was established to develop the tools, approaches and technologies that will be required to address the technical challenges associated characteriza- tion, remediation and long-term monitoring of recalcitrant compounds in the subsurface at Department of Energy (DOE) Environmental Management (EM) sites. The ABRS AFRI site provides a unique setting for researchers in both applied and basic science fields. A wealth of subsurface data is available to support research activities and remedial decision making.

158

Applied Ventures LLC | Open Energy Information  

Open Energy Info (EERE)

Applied Ventures LLC Applied Ventures LLC Name Applied Ventures LLC Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Region Southern CA Area Product Venture capital. Number of employees 1-10 Phone number (408) 727-5555 Website http://www.appliedventures.com Coordinates 37.37751°, -121.978721° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.37751,"lon":-121.978721,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

159

Uniform insulation applied-B ion diode  

DOE Patents (OSTI)

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, and ions may be focused at a point on the z axis.

Seidel, D.B.; Slutz, S.A.

1986-04-11T23:59:59.000Z

160

Uniform insulation applied-B ion diode  

DOE Patents (OSTI)

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, the ions may be focused at a point on the z axis.

Seidel, David B. (Albuquerque, NM); Slutz, Stephen A. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Applying Adaptive Evolutionary Algorithms to Hard Problems  

E-Print Network (OSTI)

Applying Adaptive Evolutionary Algorithms to Hard Problems J.I. van Hemert1 jvhemert into two distinct parts. The main theme is adaptive evolutionary algorithms. The rst part covers. The second part mainly consists of the development of a library. Its use is aimed at evolutionary algorithms

Emmerich, Michael

162

Apply for Beam Time | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply for Beam Time Apply for Beam Time NEXT PROPOSAL DEADLINE: March 7, 2014 @ 11:59 PM (Chicago time) Submit Proposal » SEE ALSO: Calendar: deadlines, run & review dates Help Page: frequently asked questions, tips for success, common errors, blank forms, instructions Review Criteria Sectors Directory: check CAT websites for info about managed beam time The Run 2014-2 proposal submission deadline is 11:59 p.m. (Chicago time) March 7, 2014. The system will open to accept proposals beginning December 20, 2013. NEW USERS: to avoid delays and to make the most of your time on site, read Become a User. You must register as a user and receive a badge number before submitting a proposal. About the Beam Time Request Process All beam time at the APS must be requested each cycle through the web-based

163

Title Page Applied and Environmental Microbiology 1  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied and Environmental Microbiology 1 Applied and Environmental Microbiology 1 2 Title Natural Competence in Thermoanaerobacter and Thermoanaerobacterium Species 3 Running Title Thermonanerobacter Natural Competence 4 5 Authors and Affiliations 6 A. Joe Shaw 1,2 , David A. Hogsett 1 , Lee R. Lynd 1,2,3 * 7 1 Mascoma Corporation, Lebanon, NH 03766 8 2 Thayer School of Engineering, Dartmouth College, Hanover, NH 03755 9 3 Department of Biological Sciences, Dartmouth College, Hanover, NH 03755 10 11 Corresponding Author 12 Lee R. Lynd 13 Thayer School of Engineering, Dartmouth College, Hanover, NH 03755 14 Phone: 603.646.2231 15 Email: lee.lynd@dartmouth.edu 16 17 18 19 20 21 22 23 Copyright © 2010, American Society for Microbiology and/or the Listed Authors/Institutions. All Rights Reserved.

164

Applying DSM evaluation results to utility planning  

SciTech Connect

This paper describes the results of a study to assess the application of DSM evaluation results to utility forecasting and planning. The paper has three objectives: (1) identify forecasting and planning applications of evaluation studies, (2) identify major obstacles and problems associated with applying evaluation results to forecasting and planning, and (3) suggest approaches to address the major problems. The paper summarizes results from interviews with utilities, regulators, and consultants to determine how the utility industry currently applies evaluation results in forecasting and planning. The paper also includes results from a detailed case study of Sacramento Municipal Utility District (SMUD) and Southern California Edison Company (SCE), two utilities with large DSM programs and active evaluation efforts.

Baxter, L.W.

1995-07-01T23:59:59.000Z

165

Fundamental & Applied Bioenergy | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Bioenergy Bioenergy SHARE Fundamental and Applied Bioenergy Steven Brown (left) and Shihui Yang have developed a microbial strain with an improved ability to convert wood products to biofuel as part of research within the DOE BioEnergy Science Center.Source: ORNL News article ORNL researchers are investigating the biological mechanisms underlying production of biofuels so that those mechanisms can be improved and used to develop a new generation of efficient bioenergy strategies that will reduce U.S. dependence on foreign oil and help curb carbon emissions. Fundamental and applied bioenergy research at ORNL includes studies conducted within the BioEnergy Science Center and the following research areas: Bioconversion Science and Technology Plant-Microbe Interfaces

166

Statistical Uncertainty Analysis Applied to Criticality Calculation  

Science Conference Proceedings (OSTI)

In this paper, we present an uncertainty methodology based on a statistical approach, for assessing uncertainties in criticality prediction using monte carlo method due to uncertainties in the isotopic composition of the fuel. The methodology has been applied to criticality calculations with MCNP5 with additional stochastic input of the isotopic fuel composition. The stochastic input were generated using the latin hypercube sampling method based one the probability density function of each nuclide composition. The automatic passing of the stochastic input to the MCNP and the repeated criticality calculation is made possible by using a python script to link the MCNP and our latin hypercube sampling code.

Hartini, Entin; Andiwijayakusuma, Dinan; Susmikanti, Mike; Nursinta, A. W. [Centre for Nuclear Informatics Development, National Nuclear Energy Agency of Indonesia (Indonesia)

2010-06-22T23:59:59.000Z

167

Applied Environmental Microbiology | VIMSS - Virtual Institute for  

NLE Websites -- All DOE Office Websites (Extended Search)

Collection of Soil Samples Collection of Soil Samples Identification of Natural Stressors Profiling of Microbial Population Field and Simulated Conceptual Model Facilities The Applied Environmental Microbiology (AEM) Core is the source of environmental data and samples that determine the stressors that will be studied, pro-vides the environments for growing the organisms to be tested, simulates stressed environments, and verifies the conceptual models to determine how these stress regulatory pathways control the biogeochemistry of contaminated sites. The specific goals of the AEM Core are to: Survey and map DOE sites contaminated by metals and radionuclides using chemical and molecular/ microbiological parameters to determine major microbial populations and potential stressors for Desulfovibrio vulgaris,

168

Illuminating the Pecking Order in Off-Grid Lighting: A Demonstration of LED Lighting for Saving Energy in the Poultry Sector  

Science Conference Proceedings (OSTI)

The Lumina Project and Lighting Africa conducted a full-scale field test involving a switch from kerosene to solar-LED lighting for commercial broiler chicken production at an off-grid farm in Kenya. The test achieved lower operating costs, produced substantially more light, improved the working environment, and had no adverse effect on yields. A strategy using conventional solar-fluorescent lighting also achieved comparable yields, but entailed a six-fold higher capital cost and significantly higher recurring battery replacement costs. Thanks to higher energy and optical efficiencies, the LED system provided approximately twice the illumination to the chicken-production area and yet drew less than half the power.At the study farm, 3000 chickens were grown in each of three identical houses under kerosene, fluorescent, and LED lighting configurations. Under baseline conditions, a yearly expenditure of 1,200 USD is required to illuminate the three houses with kerosene. The LED system eliminates this fuel use and expense with a corresponding simple payback time of 1.5 years, while the solar-fluorescent system has a payback time of 9.3 years. The corresponding reduction in fuel expenditure in both cases represents a 15percent increase in after-tax net income (revenues minus expenses) across the entire business operation. The differential cost-effectiveness between the LED and fluorescent systems would be substantially greater if the fluorescent system were upsized to provide the same light as the LED system. Providing light with the fluorescent or LED systems is also far more economical than connecting to the grid in this case. The estimated grid-connection cost at this facility is 1.7 million Kenya Schillings (approximately 21,250 USD), which is nearly six-times the cost of the fluorescent system and 35-times the cost of the LED system.The LED system also confers various non-energy benefits. The relative uniformity of LED lighting, compared to the fluorescent or kerosene lighting, reduced crowding which in turn created a less stressful environment for the chickens. The far higher levels of illumination also created a better environment for the workers, while eliminating the time required for obtaining fuel and maintaining kerosene lanterns. An additional advantage of the LED system relative to the solar fluorescent system was that the former does not require a skilled technician to carry out the installation. The portable LED system lighting layout is also more easily adjusted than that of the hardwired fluorescent systems. Furthermore, switching to the LED system avoids over one metric ton of carbon dioxide emissions per house on an annual basis compared to kerosene. There is high potential for replication of this particular LED lighting strategy in the developing world. In order to estimate the scale of kerosene use and the potential for savings, more information is needed on the numbers of chickens produced off-grid, as well as lighting uses for other categories of poultry production (egg layers, indigenous broilers ). Our discovery that weight gain did not slow in the solar-fluorescent house after it experienced extended lighting outages beginning on day 14 of the 35-day study suggests that conventional farming practices in Kenyan broiler operations may call for more hours of lighting than is needed to achieve least-cost production.

Tracy, Jennifer; Mills, Evan

2010-11-06T23:59:59.000Z

169

A Case Study of the Applied Learning Academy: Reconceptualized Quantum Design of Applied Learning  

E-Print Network (OSTI)

The purpose of this qualitative study was to examine the Applied Learning Academy (ALA) and allow the lessons learned from this public school to emerge from the narrative stories of past students, parents, teachers, administrators, and local business associates who have been directly involved and influenced by the applied learning teaching method. Accountability is critical for all public and charter schools. Districts have been trying to raise the standards with new programs and strategies in an effort to make learning experiences relevant to students? daily lives. Revisiting John Dewey?s philosophy from the progressive movement, project-based, service learning, community partnerships, and portfolio assessment helped to create the applied learning method. In the present study, a qualitative case study approach was utilized to identify successful factors, benefits, and drawbacks of applied learning in order to describe the transition of portfolio assessment, project-based learning, and community-based partnerships within the classroom and to understand the impact and misconceptions of applied learning as experienced through the Recognized Campus, ALA, a 6-8th public middle school within a large urban school district. Participant interviews, field observations, and historical records were collected which indicated that student centered project-based curriculum, small school size creating family relationships, community involvement with partnerships, service learning projects, and metacognitive development from portfolio assessments were the major factors that supported academic rigor and relevance because of the real educational applications in this applied learning middle school. Briefly defined, applied learning is when a problem is seen within the surrounding community, and the solution is generated by the students. This progressive 15-year impact of applied learning ultimately leads to the development of four applied learning schools despite the misconception that applied learning was a remedial or gifted program. Redefining applied learning for a better understanding developed a reconceptualized diagram borrowed from the quantum mechanics model. Reconceptualization expands the interpretation by increasing the intellectual flexibility. As the student becomes energized from the acquired knowledge of learning applicable skills through service learning, project-based curriculum, and portfolio assessment, the student?s academic growth should increase to a higher, educational ?energy level? supported by the critical, situated-learning, and feminist theories.

Gordon, Denise

2009-12-01T23:59:59.000Z

170

The Applied Mathematics for Power Systems (AMPS)  

SciTech Connect

Increased deployment of new technologies, e.g., renewable generation and electric vehicles, is rapidly transforming electrical power networks by crossing previously distinct spatiotemporal scales and invalidating many traditional approaches for designing, analyzing, and operating power grids. This trend is expected to accelerate over the coming years, bringing the disruptive challenge of complexity, but also opportunities to deliver unprecedented efficiency and reliability. Our Applied Mathematics for Power Systems (AMPS) Center will discover, enable, and solve emerging mathematics challenges arising in power systems and, more generally, in complex engineered networks. We will develop foundational applied mathematics resulting in rigorous algorithms and simulation toolboxes for modern and future engineered networks. The AMPS Center deconstruction/reconstruction approach 'deconstructs' complex networks into sub-problems within non-separable spatiotemporal scales, a missing step in 20th century modeling of engineered networks. These sub-problems are addressed within the appropriate AMPS foundational pillar - complex systems, control theory, and optimization theory - and merged or 'reconstructed' at their boundaries into more general mathematical descriptions of complex engineered networks where important new questions are formulated and attacked. These two steps, iterated multiple times, will bridge the growing chasm between the legacy power grid and its future as a complex engineered network.

Chertkov, Michael [Los Alamos National Laboratory

2012-07-24T23:59:59.000Z

171

EG G Mound Applied Technologies payroll system  

SciTech Connect

EG G Mound Applied Technologies, Inc., manages and operates the Mound Facility, Miamisburg, Ohio, under a cost-plus-award-fee contract administered by the Department of Energy's Albuquerque Field Office. The contractor's Payroll Department is responsible for prompt payment in the proper amount to all persons entitled to be paid, in compliance with applicable laws, regulations, and legal decisions. The objective was to determine whether controls were in place to avoid erroneous payroll payments. EG G Mound Applied Technologies, Inc., did not have all the internal controls required by General Accounting Office Title 6, Pay, Leave, and Allowances.'' Specifically, they did not have computerized edits, separation of duties and responsibilities, and restricted access to payroll data files. This condition occurred because its managers were not aware of Title 6 requirements. As a result, the contractor could not assure the Department of Energy that payroll costs were processes accurately; and fraud, waste, or abuse of Department of Energy funds could go undetected. Our sample of 212 payroll transactions from a population of 66,000 in FY 1991 disclosed only two minor processing errors and no instances of fraud, waste or abuse.

Not Available

1992-02-07T23:59:59.000Z

172

201/span>3 Short Course Applied Fundamentals in Interfacial Phenomena  

Science Conference Proceedings (OSTI)

Applied Fundamentals in Interfacial Phenomena Short Course held at the 104th AOCS Annual Meeting and Expo. 201/span>3 Short Course Applied Fundamentals in Interfacial Phenomena Applied Fundamentals in Interfacial Phenomena Saturday

173

Applied Energy Management | Open Energy Information  

Open Energy Info (EERE)

Management Management Jump to: navigation, search Name Applied Energy Management Place Huntersville, North Carolina Zip 28078 Sector Efficiency, Renewable Energy Product North Carolina-based, energy efficiency and renewable energy service and construction company. Coordinates 35.409853°, -80.842716° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.409853,"lon":-80.842716,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

174

How to Apply for ENERGY STAR® Certification  

NLE Websites -- All DOE Office Websites (Extended Search)

ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü "How To" Series How to Apply for ENERGY STAR ® Certification Commercial buildings that earn EPA's ENERGY STAR certification perform in the top 25 percent of similar buildings nationwide, as verified by a Licensed Professional (a Professional Engineer or a Registered Architect). ENERGY STAR certified buildings use an average of 35 percent less energy and are responsible for 35 percent fewer greenhouse gas emissions than average buildings. To qualify for the ENERGY STAR, a property must achieve an ENERGY STAR score of 75 or higher on EPA's 1 - 100 scale, which compares a property's energy performance to

175

FY 1990 Applied Sciences Branch annual report  

DOE Green Energy (OSTI)

The Applied Sciences Branch actively supports the advancement of DOE/SERI goals for the development and implementation of the solar photovoltaic technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility which is capable of providing information on the full range of photovoltaic components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of photovoltaic technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. This report contains information on surface and interface analysis, materials characterization, development, electro-optical characterization module testing and performance, surface interactions and FTIR spectroscopy.

Keyes, B.M.; Dippo, P.C. (eds.)

1991-11-01T23:59:59.000Z

176

Navigating without vision: Basic and applied research  

E-Print Network (OSTI)

ABSTRACT: We describe some of the results of our program of basic and applied research on navigating without vision. One basic research topic that we have studied extensively is path integration, a form of navigation in which perceived self-motion is integrated over time to obtain an estimate of current posilion and orientation. In experiments on pathway completion, one test of path integration ability, we have found that subjects who are passively guided over the outbound path without vision exhibit significant errors when attempting to return to the origin but are nevertheless sensitive to turns and segment lengths in the stimulus path. We have also found no major differences in path inlegration ability among blirid and sighted populations. A model we havc developed that attributes errors in path integration to errors in encoding the stimulus path is a good beginning toward understanding path integration performance. In otber research on path integration, in which optic flow information was manipulated in addition to the proprioceptive and vestibular information of nonvisual locomotion, we havc found that optic flow is a weak input to the path integration process. In other basic research, our studies of auditory distance perception in outdoor environments show systematic underestimation oC sound source distance. Our applied research has been concerned with developing and evaluating a navigation system for the visually impaired that uses three recent technologies: the Global Positioning System, Geographic Information Systems, and virtual acouslics. Our work shows that there is considerable promise of these three technologies in allowing visually impaired individuals to navigate and learn about unfamiliar environments without the assistance of human guides. (Optoni Vis Sci 2001;78:282-289)

Jack M. Loomis; Roberta L. Klatzky; Reginald G. Golledge

2001-01-01T23:59:59.000Z

177

Remediation of Mercury and Industrial Contaminants Applied Field...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research...

178

Computational Advances in Applied Energy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advances in Applied Energy Computational Advances in Applied Energy Friedmann-LLNL-SEAB.10.11.pdf More Documents & Publications Director's Perspective by George Miller...

179

Applying physics, teamwork to fusion energy science | Princeton...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applying physics, teamwork to fusion energy science American Fusion News Category: Massachusetts Institute of Technology (MIT) Link: Applying physics, teamwork to fusion energy...

180

Attenuation-Based Remedies in the Subsurface Applied Field Research...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subsurface Applied Field Research Initiative (ABRS AFRI) Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Applying Climate Information for Adaptation Decision-Making:...  

Open Energy Info (EERE)

Applying Climate Information for Adaptation Decision-Making: A Guidance and Resource Document Jump to: navigation, search Tool Summary Name: Applying Climate Information for...

182

Bright Idea Illuminates LED Standards  

Science Conference Proceedings (OSTI)

... the pulse measurement results that LED manufacturers use. ... that the optical and electrical characteristics of ... last much longer at lower temperatures. ...

2011-04-25T23:59:59.000Z

183

EUV Resists: Illuminating the challenges  

SciTech Connect

As extreme ultraviolet (EUV) lithography enters the commercialization phase with potential introduction at the 3x nm half-pitch node in 2013, the attention of advanced EUV resist research has turned to addressing patterning at 16-nm half pitch and below. Whereas line-edge roughness is the primary concern at 2x half pitch and larger, research at the 16-nm half pitch level is uncovering broader.

Naulleau, Patrick; Anderson, Christopher; George, Simi

2011-06-01T23:59:59.000Z

184

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 17070 of 31,917 results. 61 - 17070 of 31,917 results. Download CX-001136: Categorical Exclusion Determination 130 Lumens Per Watt 1000 Lumen Warm White LEDs (Light-Emitting Diodes) for Illumination CX(s) Applied: B3.6, B5.1 Date: 03/05/2010 Location(s): San Jose, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-001136-categorical-exclusion-determination Download CX-001137: Categorical Exclusion Determination Advanced Epi Tools for Gallium Nitride LED (Light Emitting Diode) Devices CX(s) Applied: B3.6 Date: 03/05/2010 Location(s): Santa Clara, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-001137-categorical-exclusion-determination

185

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21 - 7730 of 28,905 results. 21 - 7730 of 28,905 results. Download CX-001041: Categorical Exclusion Determination High Flux Commercial Illumination Solution with Intelligent Controls CX(s) Applied: B3.6 Date: 03/01/2010 Location(s): Danvers, Massachusetts Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-001041-categorical-exclusion-determination Download CX-000947: Categorical Exclusion Determination Gulf of Mexico 3-Dimensional Operational Ocean Forecast System Pilot Project (Raleigh) CX(s) Applied: A9 Date: 03/01/2010 Location(s): Raleigh, North Carolina Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-000947-categorical-exclusion-determination Download CX-000948: Categorical Exclusion Determination

186

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 5810 of 31,917 results. 01 - 5810 of 31,917 results. Article Salazar, Chu Flip Switch on 65% Energy Savings Energy-Efficient LED Lights Illuminated in Ceremony on National Mall http://energy.gov/articles/salazar-chu-flip-switch-65-energy-savings Download CX-006111: Categorical Exclusion Determination Washington-Tribe-Stillaguamish Tribe of Indians CX(s) Applied: A1, A9, B2.5, B5.1 Date: 07/07/2011 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy http://energy.gov/nepa/downloads/cx-006111-categorical-exclusion-determination Download CX-005572: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Washington-Tribe-Cowlitz Indian Tribe CX(s) Applied: B2.5, B5.1 Date: 04/04/2011 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy

187

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 17090 of 31,917 results. 81 - 17090 of 31,917 results. Download CX-001037: Categorical Exclusion Determination Low-Cost Illumination Grade Light Emitting Diodes (LEDs) CX(s) Applied: B3.6, B5.1 Date: 03/02/2010 Location(s): San Jose, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-001037-categorical-exclusion-determination Download CX-005511: Categorical Exclusion Determination Steam Reforming Treatability Study with Hanford Sample E CX(s) Applied: B3.6 Date: 02/10/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005511-categorical-exclusion-determination Download CX-001019: Categorical Exclusion Determination

188

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

91 - 3000 of 8,172 results. 91 - 3000 of 8,172 results. Download CX-001040: Categorical Exclusion Determination Puget Sound Clean Cities Coalition Petroleum Reduction Project - Conversion CX(s) Applied: B5.1 Date: 03/01/2010 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-001040-categorical-exclusion-determination Download CX-001041: Categorical Exclusion Determination High Flux Commercial Illumination Solution with Intelligent Controls CX(s) Applied: B3.6 Date: 03/01/2010 Location(s): Danvers, Massachusetts Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-001041-categorical-exclusion-determination Download CX-001010: Categorical Exclusion Determination

189

Applied Science and Technology Task Order Fiscal Year 2009 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End...

190

Applied Science and Technology Task Order Fiscal Year 2010 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End...

191

Applied Science and Technology Task Order Fiscal Year 2011 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End...

192

Applied Science and Technology Task Order Fiscal Year 2008 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End...

193

Proceedings of the 2011 ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 26th International Symposium on Applied Computing (SAC 2011). For the past 25 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

William Chu; W. Eric Wong; Mathew J. Palakal; Chih-Cheng Hung

2011-03-01T23:59:59.000Z

194

Roadmap: Applied Engineering Manufacturing Systems Bachelor of Science  

E-Print Network (OSTI)

Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT 15000 Introduction to Human Communication 3 Fulfills Kent Core Additional Kent Core Requirement 3 See #12;Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT

Sheridan, Scott

195

Open Solicitations and How to Apply: the Loan Guarantee Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Open Solicitations and How to Apply: the Loan Guarantee Program Invites You to a Free Webinar Open Solicitations and How to Apply: the Loan Guarantee Program Invites You to a Free...

196

Proceedings of the 2010 ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 25th International Symposium on Applied Computing (SAC 2010). For the past 24 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

Sung Y. Shin; Sascha Ossowski; Michael Schumacher; Mathew J. Palakal; Chih-Cheng Hung

2010-03-01T23:59:59.000Z

197

DOE - Office of Legacy Management -- Case School of Applied Science...  

Office of Legacy Management (LM)

Case School of Applied Science Ohio State University - OH 0-01 FUSRAP Considered Sites Site: Case School of Applied Science, Ohio State University (OH.0-01 ) Eliminated from...

198

PLZT NANO PRE URSORS FOR HIGH ENERGY DENSITY APPLI ATIONS  

APPLI ATIONS & INDUSTRIES ENEFITS Pulsed Power Oil Exploration Capacitors Refer to SD # 12119 Thermistors Transducers Military & Defense Automotive

199

Dixson and Fu Receive NIST Applied Research Award  

Science Conference Proceedings (OSTI)

Dixson and Fu Receive NIST Applied Research Award. For Immediate Release: December 1, 1999. *. Bookmark and Share. ...

2013-07-19T23:59:59.000Z

200

Materials Research Applied to National Needs (MARANN) in Honor ...  

Science Conference Proceedings (OSTI)

Jul 31, 2012 ... About this Symposium. Meeting, 2013 TMS Annual Meeting & Exhibition. Symposium, Materials Research Applied to National Needs...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING 1 ADVISER: Immersive Scientific Visualization Applied  

E-Print Network (OSTI)

be applied to the terrain (Figure 2b). A custom pixel shader was integrated with ROAM to render the dynamic

Head III, James William

202

ISHED1: Applying the LEM Methodology to Heat Exchanger Design  

E-Print Network (OSTI)

ISHED1: Applying the LEM Methodology to Heat Exchanger Design Kenneth A. Kaufman Ryszard S. Michalski MLI 00-2 #12;2 ISHED1: APPLYING THE LEM METHODOLOGY TO HEAT EXCHANGER DESIGN Kenneth A. Kaufman-2 January 2000 #12;ISHED1: APPLYING THE LEM METHODOLOGY TO HEAT EXCHANGER DESIGN Abstract Evolutionary

Michalski, Ryszard S.

203

Applying Innovation System Concept in Agricultural Research for  

Open Energy Info (EERE)

Applying Innovation System Concept in Agricultural Research for Applying Innovation System Concept in Agricultural Research for Development: A learning module Jump to: navigation, search Tool Summary Name: Applying Innovation System Concept in Agricultural Research for Development: A learning module Agency/Company /Organization: International Livestock Research Institute Sector: Land Focus Area: Agriculture Topics: Policies/deployment programs Resource Type: Training materials Website: mahider.ilri.org/bitstream/10568/167/1/Innovation_System_Agric_LM.pdf Applying Innovation System Concept in Agricultural Research for Development: A learning module Screenshot References: Applying Innovation System Concept in Agricultural Research for Development: A learning module[1] Preface "Sustained agricultural growth requires, among others, increased

204

Vehicle Technologies Office: Lightweight Materials Long-Term Applied  

NLE Websites -- All DOE Office Websites (Extended Search)

Long-Term Applied Research: Magnesium and Carbon Fiber to someone by E-mail Long-Term Applied Research: Magnesium and Carbon Fiber to someone by E-mail Share Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Facebook Tweet about Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Twitter Bookmark Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Google Bookmark Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Delicious Rank Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Digg Find More places to share Vehicle Technologies Office: Lightweight

205

How to Apply for an SES Position | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for an SES Position How to Apply for an SES Position How to Apply for an SES Position The Senior Executive Service (SES) is an elite group of men and women meeting the highest professional standards who administer public programs at the top levels of the Federal government. SES employees' salaries are linked directly to individual performance. The U.S. Office of Personnel Management's (OPM) SES web page contains a host of information that may be benefical to you. To apply for current SES positions within the Federal Government, including the Department of Energy please visit the Office of Personnel Management's USAJOBS site. From this site, you may view, download and apply for vacancies of interest to you. DOE does not accept unsolicited resumes. You must apply to a specific

206

Apply for Our Jobs | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Apply for Our Jobs | National Nuclear Security Administration Apply for Our Jobs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Apply for Our Jobs Home > Federal Employment > Apply for Our Jobs Apply for Our Jobs Whether you're a student seeking to learn more about a future career, just starting out, at mid-career or an experienced executive, NNSA may have the

207

Apply for Our Jobs | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply for Our Jobs | National Nuclear Security Administration Apply for Our Jobs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Apply for Our Jobs Home > Federal Employment > Apply for Our Jobs Apply for Our Jobs Whether you're a student seeking to learn more about a future career, just starting out, at mid-career or an experienced executive, NNSA may have the

208

Challenges in Applying Diamond Coatings to Carbide Twist Drills  

Science Conference Proceedings (OSTI)

Despite of the attractive advantage of applying diamond coating to drills, ... Investigation of a Hybrid Cutting Tool Design for Shearing Operations of Sheet Metals.

209

NREL: Technology Transfer - Apply Now for Energy-Efficient Housing ...  

Apply Now for Energy-Efficient Housing ... and NREL's Residential Buildings Research Web site to learn about systems integration and energy analysis ...

210

Applied Process Engineering Laborotory APEL | Open Energy Information  

Open Energy Info (EERE)

Engineering Laborotory APEL Jump to: navigation, search Name Applied Process Engineering Laborotory (APEL) Place United States Sector Services Product General Financial & Legal...

211

Applied Mathematics and Plasma Physics, T-5: Theoretical, T:...  

NLE Websites -- All DOE Office Websites (Extended Search)

Pieter Swart Deputy Group Leader Kim Rasmussen Administration Charlotte Lehman Office Location TA-3, Bldg 508, Rm 204 Applied Mathematics and Plasma Physics, T-5 The group...

212

Mark Linne Dept. Applied Mechanics, Chalmers University, Gothenburg...  

NLE Websites -- All DOE Office Websites (Extended Search)

Optical and X-ray Measurements for Fuel Sprays Mark Linne Dept. Applied Mechanics, Chalmers University, Gothenburg, 41296, Sweden This talk will describe measurement needs across...

213

An improved Benders decomposition applied to a multi-layer ...  

E-Print Network (OSTI)

GLOBECOM 2007, Washington DC, USA, December 2007. [8] A. M. Costa, A survey on benders decomposition applied to fixed-charge network design...

214

Infrared Imagery Applied to A Large Buoyant Plume  

Science Conference Proceedings (OSTI)

The possibility of applying infrared imagery to the study of a large, hot plume materialized by carbon particles resulting from the incomplete combustion of fuel oil is investigated.

J-M. Brustet; B. Benech; P. Waldteufel

1981-05-01T23:59:59.000Z

215

1 SCRA Applied Research & Development offers the following ...  

Science Conference Proceedings (OSTI)

... and the rapid transition of results into US ... the Way (PLTW); National Science Foundation initiatives ... 6 SCRA Applied R&D 5300 International Blvd N ...

2012-10-26T23:59:59.000Z

216

Geothermal: Sponsored by OSTI -- Extracting and Applying SV-SV...  

Office of Scientific and Technical Information (OSTI)

Extracting and Applying SV-SV Shear Modes from Vertical Vibrator Data Across Geothermal Prospects Final Report Geothermal Technologies Legacy Collection HelpFAQ | Site Map |...

217

Lagrangean Duality Applied on Vehicle Routing with Time Windows  

E-Print Network (OSTI)

Nov 6, 2001 ... Lagrangean Duality Applied on Vehicle Routing with Time Windows ... with the Vehicle Routing Problem with Time Windows (VRPTW).

218

Los Alamos Lab: International and Applied Technology Division...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Electromagnetics, IAT-2 IAT-2 is a broad spectrum electromagnetics applications organization whose research and development activities address the Global Security...

219

How to Apply for NIST, Department of Commerce, and Other ...  

Science Conference Proceedings (OSTI)

... Search for Job Vacancies: Vacancy announcements contain important information that applicants need to know to apply for a specific job opening ...

2013-08-09T23:59:59.000Z

220

Modular Systems Biology applied to TGFbeta and DNA Damage Response...  

NLE Websites -- All DOE Office Websites (Extended Search)

Modular Systems Biology applied to TGFbeta and DNA Damage Response Signaling following Low Dose Radiation Francis Cucinotta NASA Johnson Space Center Abstract Modular systems...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Steel Research Applied to National Needs - A Company Perspective  

Science Conference Proceedings (OSTI)

Symposium, Materials Research Applied to National Needs (MARANN) in Honor of ... food packaging, transportation (auto, rail, and air), etc, to name just a few.

222

Applying to EPA for Approval of Other Uses of Phosphogypsum  

E-Print Network (OSTI)

Applying to EPA for Approval of Other Uses of Phosphogypsum: Preparing and Submitting a Complete. EP-D-04-007, Work Assignment 0-2 December 2005 #12;ii Applying for Other Uses of Phosphogypsum phosphogypsum in stacks? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. What

223

urbino worldwide campus applied computer scienceComputer Architecture  

E-Print Network (OSTI)

urbino worldwide campus applied computer scienceComputer Architecture alessandro bogliolo isti information science and technology institute 1/16 05.03 Pipeline hazards 05 CPU 05.03 Pipeline hazards;urbino worldwide campus applied computer scienceComputer Architecture alessandro bogliolo isti

Bogliolo, Alessandro

224

Applied Mathematics | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Applied Applied Mathematics Advanced Scientific Computing Research (ASCR) ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced Computing (SciDAC) Computational Science Graduate Fellowship (CSGF) ASCR SBIR-STTR Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) News & Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-7486 F: (301) 903-4846 E: sc.ascr@science.doe.gov More Information » Research Applied Mathematics Print Text Size: A A A RSS Feeds FeedbackShare Page

225

Remediation of Mercury and Industrial Contaminants Applied Field Research  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remediation of Mercury and Industrial Contaminants Applied Field Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Located on the Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, the RoMIC-AFRI was established to protect water resources by addressing the challenge of preventing contamination. The initiative at Oak Ridge is a collaborative effort that leverages DOE investments in basic science and applied research and the work of site contractors to address the complex challenges in the remediation of legacy waste at the Oak Ridge Reservation. The mission of the Remediation of Mercury and Industrial Contaminants

226

Applied Materials Switzerland SA Formerly HCT Shaping Systems SA | Open  

Open Energy Info (EERE)

Switzerland SA Formerly HCT Shaping Systems SA Switzerland SA Formerly HCT Shaping Systems SA Jump to: navigation, search Name Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA) Place Chezeaux, Switzerland Zip 1033 Product Manufacturer of wire saws for the semiconductor and photovoltaic wafer slicing industries. References Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA) is a company located in Chezeaux, Switzerland . References ↑ "[ Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA)]" Retrieved from "http://en.openei.org/w/index.php?title=Applied_Materials_Switzerland_SA_Formerly_HCT_Shaping_Systems_SA&oldid=342245"

227

18.337J / 6.338J Applied Parallel Computing (SMA 5505), Spring 2005  

E-Print Network (OSTI)

Applied Parallel Computing is an advanced interdisciplinary introduction to applied parallel computing on modern supercomputers.

Edelman, Alan

228

How to Apply for Senior Executive positions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for Senior Executive positions How to Apply for Senior Executive positions How to Apply for Senior Executive positions To apply vacancies for SENIOR EXECUTIVE SERVICE (SES) , SENIOR LEVEL (SL), SCIENTIFIC AND PROFESSIONAL (ST) positions within the Department of Energy please visit OPM's website: http://www.usajobs.gov. From this site, you may download announcements for vacancies of interest to you. SENIOR EXECUTIVE SERVICE (SES) The Guide to Senior Executive Service Qualifications provides detailed information about executive qualifications and tips for writing effective qualification statements. What Are Executive Core Qualifications (ECQs) The Executive Core Qualifications (ECQs) define the competencies needed to build a federal corporate culture that drives for results, serves customers, and builds successful teams and coalitions within and outside

229

Proceedings of the 2008 ACM symposium on Applied computing  

Science Conference Proceedings (OSTI)

Welcome to the 23rd Annual ACM Symposium on Applied Computing (SAC 2008). This international event is dedicated to computer scientists, engineers, and practitioners seeking innovative ideas in various areas of computer applications. This year, the conference ...

Roger L. Wainwright; Hisham M. Haddad

2008-03-01T23:59:59.000Z

230

A Stereo Photogrammetric Technique Applied to Orographic Convection  

Science Conference Proceedings (OSTI)

This paper describes a technique for photogrammetric analysis of stereo pairs of images that is applied to the study of orographic convection. The technique is designed for use with digital images and assumes detailed knowledge of the camera ...

Joseph A. Zehnder; Jiuxiang Hu; Anshuman Razdan

2007-06-01T23:59:59.000Z

231

DOE Solar Decathlon: How to Apply for the Solar Decathlon  

NLE Websites -- All DOE Office Websites (Extended Search)

Photos Videos Education Sponsors Volunteers History FAQs Contacts How To Apply for the Solar Decathlon Is your school interested in participating in the next U.S. Department of...

232

Energy Efficiency in Buildings in Switzerland - Applied Research...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency in Buildings in Switzerland - Applied Research on Vacuum Insulation, Passive Houses etc. Speaker(s): Armin Binz Date: January 21, 2003 - 12:00pm Location: Bldg....

233

Electrical capacitance volume tomography (ECVT) applied to bubbling fluid beds  

SciTech Connect

These presentation visuals illustrate the apparatus and method for applying Electrical Capacitance Volume Tomography (ECVT) to bubbling fluid beds to their solid fraction and bubble properties. Results are compared to estimated values.

Weber, J., Mei, J.

2012-01-01T23:59:59.000Z

234

NEW MOTOR DESIGN CONCEPT FOR ENERGY SAVING APPLIED TO  

E-Print Network (OSTI)

SHARK, NEW MOTOR DESIGN CONCEPT FOR ENERGY SAVING APPLIED TO SWITCHED RELUCTANCE MOTOR by Ana of the cylindrical and Shark air gap Switched Reluctance Motors and their assistance during the experimental work with other motor technologies such

235

Los Alamos Lab: International and Applied Technology Division...  

NLE Websites -- All DOE Office Websites (Extended Search)

International Research and Analysis, IAT-1 IAT-1 has one of the most diverse work forces in the division. By applying its scientific and engineering skills to designated problems,...

236

Proceedings of the 2009 ACM symposium on Applied Computing  

Science Conference Proceedings (OSTI)

On behalf of the Organizing Committee, we welcome you to the 24th Annual ACM Symposium on Applied Computing (SAC 2009) hosted by Chaminade University in Hawaii. This international forum has been dedicated to computer scientists, engineers and practitioners ...

Sung Y. Shin; Sascha Ossowski

2009-03-01T23:59:59.000Z

237

CX-000147: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Galloway's Rooftop Heating, Ventilating, and Air Conditioning Unit Replacement, Boiler Replacement, Lighting Upgrade CX(s) Applied:...

238

CX-006453: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination CX-006453: Categorical Exclusion Determination Geothermal Incentive Program - Matunaliec Residence geothermal (Deercliff Road) CX(s) Applied:...

239

Lighting and thermal operations. Conservation paper number 18. Energy conservation principles applied to office lighting  

SciTech Connect

Research was conducted by reviewing literature and examining past lighting design practices in order to make the design, installation, and operation of future office building lighting systems more responsive to the needs of energy conservation. Information is included on lighting energy use in offices in the recent past, human performance as affected by illumination, visual system design for offices, and guidelines for lighting energy management including potential energy savings in office lighting. (LCL)

1975-01-01T23:59:59.000Z

240

How to Apply for Weatherization Assistance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for Weatherization Assistance How to Apply for Weatherization Assistance How to Apply for Weatherization Assistance March 24, 2009 - 12:45pm Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory A few weeks ago, the U.S. Department of Energy announced that it was investing $8 billion into weatherization and state energy grants-$5 billion of which is going directly to the Weatherization Assistance Program. And why is that interesting? Well, the Weatherization Assistance Program provides low-income families with free-of-charge, energy efficient upgrades to their homes. A more efficient home means that you pay less every month on your energy bills-and while that's the kind of upgrade anyone can benefit from, this program helps those who need those extra dollars the

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Modular Applied General Equilibrium Tool (MAGNET) | Open Energy Information  

Open Energy Info (EERE)

Modular Applied General Equilibrium Tool (MAGNET) Modular Applied General Equilibrium Tool (MAGNET) Jump to: navigation, search Tool Summary Name: Modular Applied General Equilibrium Tool (MAGNET) Agency/Company /Organization: LEI Wageningen UR, the Netherlands Complexity/Ease of Use: Moderate Related Tools Ex Ante Appraisal Carbon-Balance Tool (EX-ACT) Climate Rapid Overview and Decision Support (C-ROADS) Simulator Partnership for Economic Policy Modeling and Policy Impact Analysis (MPIA) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS A modular global computable general equilibrium model that covers the whole economy and has been used extensively in agricultural, environmental, and trade policy analysis; builds on the GTAP model, and is the successor of LEITAP. Approach MAGNET is based on the Global Trade Analysis Project (GTAP) model and

242

Overview Of Electromagnetic Methods Applied In Active Volcanic Areas Of  

Open Energy Info (EERE)

Of Electromagnetic Methods Applied In Active Volcanic Areas Of Of Electromagnetic Methods Applied In Active Volcanic Areas Of Western United States Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Overview Of Electromagnetic Methods Applied In Active Volcanic Areas Of Western United States Details Activities (7) Areas (2) Regions (0) Abstract: A better understanding of active volcanic areas in the United States through electromagnetic geophysical studies received foundation from the many surveys done for geothermal exploration in the 1970's. Investigations by governmental, industrial, and academic agencies include (but are not limited to) mapping of the Cascades. Long Valley/Mono area, the Jemez volcanic field, Yellowstone Park, and an area in Colorado. For one example - Mt. Konocti in the Mayacamas Mountains, California - gravity,

243

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site February 10, 2012 - 12:00pm Addthis Washington, DC - A technology to remotely monitor conditions at energy-rich Marcellus Shale gas wells to help insure compliance with environmental requirements has been developed through a research partnership funded by the U.S. Department of Energy (DOE). NETL-RUA researcher Dr. Michael McCawley hasdeveloped a technology to remotely monitor theenvironment around energy-rich Marcellus Shale gas wells. Photo courtesy of West Virginia University.The technology - which involves three wireless monitoring modules to measure volatile organic compounds, dust, light and sound - is currently being tested at a Marcellus

244

How to Apply the ENERGY STAR Certified Building Decal  

NLE Websites -- All DOE Office Websites (Extended Search)

How to Apply the ENERGY STAR How to Apply the ENERGY STAR Certified Building Decal Page Cyan-and-White Decal Instructions Application Instructions 2 How to Make a Glass Plaque 4 Cyan-and-White Paper Templates 5 "Etched-Look" Decal Instructions Application Instructions 7 How to Make a Glass Plaque 9 "Etched-Look" Paper Templates 10 How to Apply the ENERGY STAR Cyan and White Certified Building Decal What's in this package: Two sets of: ENERGY STAR logo decal 1. "Certified Building" lettering decal, with thick white paper on 2. one side and thin, semi-translucent paper on the other side. Paper templates of logo and lettering What you'll need: Level 1. Masking tape 2. Rubbing alcohol and a clean, soft cloth 3. Drivers license, credit card, or other rigid

245

Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource  

Open Energy Info (EERE)

Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Locations In The Us Basin And Range With A Focus On Dixie Meadows, Nv Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Locations In The Us Basin And Range With A Focus On Dixie Meadows, Nv Details Activities (1) Areas (1) Regions (0) Abstract: This paper presents an overview of the work our collaboration is doing to increase the detailed mapped resource base for geothermal exploration in the Western US. We are imaging several large areas in the western US with high resolution airborne hyperspectral and satellite multispectral sensors. We have now entered the phase where the remote sensing techniques and tools we are developing are mature enough to be

246

Guidance for Federal Departments and Agencies on Establishing, Applying,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Federal Departments and Agencies on Establishing, for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act This guidance from the Council on Environmental Quality provides methods for substantiating categorical exclusions, clarifies the process for establishing categorical exclusions, outlines how agencies should engage the public when establishing and using categorical exclusions, describes how agencies can document the use of categorical exclusions, and recommends periodic agency review of existing categorical exclusions. Final Guidance for Federal Departments and Agencies on Establishing,

247

Guidance for Federal Departments and Agencies on Establishing, Applying,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guidance for Federal Departments and Agencies on Establishing, Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act This guidance from the Council on Environmental Quality provides methods for substantiating categorical exclusions, clarifies the process for establishing categorical exclusions, outlines how agencies should engage the public when establishing and using categorical exclusions, describes how agencies can document the use of categorical exclusions, and recommends periodic agency review of existing categorical exclusions. Final Guidance for Federal Departments and Agencies on Establishing,

248

C: Applying the Toyota Production System to a Hospital Pharmacy  

E-Print Network (OSTI)

This paper presents the early results of an action research project to apply the principles of the Toyota Production System to a hospital pharmacy. We demonstrate that work systems can be improved through Bowen and Spears [3] Rules-in-Use: defining activities better, making simpler and more direct connections, and/or smoothing pathways. We also extend this work by introducing a problem-solving tool to facilitate process improvement. The paper will describe the interventions attempted, the results, and implications for applying the Rules-in-Use to health care environments.

Durward K. Sobek; Cindy Jimmerson

2003-01-01T23:59:59.000Z

249

Process for applying control variables having fractal structures  

DOE Patents (OSTI)

A process and apparatus for the application of a control variable having a fractal structure to a body or process. The process of the present invention comprises the steps of generating a control variable having a fractal structure and applying the control variable to a body or process reacting in accordance with the control variable. The process is applicable to electroforming where first, second and successive pulsed-currents are applied to cause the deposition of material onto a substrate, such that the first pulsed-current, the second pulsed-current, and successive pulsed currents form a fractal pulsed-current waveform.

Bullock, IV, Jonathan S. (Oak Ridge, TN); Lawson, Roger L. (Oliver Springs, TN)

1996-01-01T23:59:59.000Z

250

Bio 3A -Applying to Health Professional Schools Dental Schools  

E-Print Network (OSTI)

Bio 3A - Applying to Health Professional Schools Dental Schools Admission Requirements and Helpful Requirements: Biology (w/lab) 1 to 1 1/2 years (At UCI Bio 93, 94, 97, 98, 99, *100 minimum). Many schools will require 3 labs. *BioSci 100 is a prerequisite for taking Bio labs at UCI. Some schools will require

Barrett, Jeffrey A.

251

Bio 3A -Applying to Health Professional Schools Pharmacy Schools  

E-Print Network (OSTI)

Bio 3A - Applying to Health Professional Schools Pharmacy Schools Admission Requirements individual web sites. Pharmacy School Admission Requirements: Biology (w/lab) Bio 93, 94*, 97, 98, 99, 100, E not be an interpersonal communication course) ­ not offered at UCI *Bio 94 is the prerequisite of Bio 97, but not required

Barrett, Jeffrey A.

252

A Test Calculus Framework applied to network security policies  

E-Print Network (OSTI)

A Test Calculus Framework applied to network security policies Yli`es Falcone1 , Jean'H`eres, France Abstract. We propose a syntax-driven test generation technique to au- tomaticaly derive abstract test cases from a set of requirements expressed in a linear temporal logic. Assuming that an elementary

Paris-Sud XI, Université de

253

Applying Bayesian Network Techniques to Prioritize Lean Six Sigma Efforts  

Science Conference Proceedings (OSTI)

In order to retain competitive advantages, many manufacturing organizations have applied Lean Six Sigma techniques to improve production processes. The general approach for implementing Lean Six Sigma is to perform various projects to tackle specific ... Keywords: Bayesian Network, Cause-and-Effect Relationships, Events of Interest, Lean, Probabilistic Inference, Six Sigma

Yanzhen Li, Rapinder S. Sawhne, Joseph H. Wilck

2013-04-01T23:59:59.000Z

254

Applying High Performance Computing to Analyzing by Probabilistic Model Checking  

E-Print Network (OSTI)

Applying High Performance Computing to Analyzing by Probabilistic Model Checking Mobile Cellular on the use of high performance computing in order to analyze with the proba- bilistic model checker PRISM. The Figure Generation Script 22 2 #12;1. Introduction We report in this paper on the use of high performance

Schneider, Carsten

255

Applying General Access Structure to Metering Ventzislav Nikov  

E-Print Network (OSTI)

Applying General Access Structure to Metering Schemes Ventzislav Nikov Department of Mathematics.vandewalle@esat.kuleuven.ac.be Abstract In order to decide on advertisement fees for web servers, Naor and Pinkas introduced metering number of clients. Several researchers have generalized the idea of Naor and Pinkas: #12;rst metering

International Association for Cryptologic Research (IACR)

256

Applying General Access Structure to Metering Ventzislav Nikov  

E-Print Network (OSTI)

Applying General Access Structure to Metering Schemes Ventzislav Nikov Department of Mathematics.vandewalle@esat.kuleuven.ac.be Abstract In order to decide on advertisement fees for web servers, Naor and Pinkas introduced metering number of clients. Several researchers have generalized the idea of Naor and Pinkas: first metering

International Association for Cryptologic Research (IACR)

257

Modeling and simulation applied in modernization of energy production plants  

Science Conference Proceedings (OSTI)

The present work presents a methodology that has been developed and successfully applied to support the information requirements of engineers in charge of the operation, modernization, and/or maintenance of energy production plants (power, oil and gas). ... Keywords: CAD software, energy production, engineering design and data management, industrial plant, operation and maintenance support

Jess Vzquez Bustos; Benjamn Eddie Zayas Prez

2011-06-01T23:59:59.000Z

258

Book review Carbon Nanotube Science: Synthesis, Properties and Appli-  

E-Print Network (OSTI)

Book review Carbon Nanotube Science: Synthesis, Properties and Appli- cations, Peter J.F. Harris in the nanotube discovery is dis- cussed in the first chapter of this book), a few years after ful- lerenes were of the nanotechnology era ­ you'll find their pictures on book covers, in newspaper articles and magazine centerfolds

Harris, Peter J F

259

A companion modelling approach applied to forest management planning  

Science Conference Proceedings (OSTI)

To assist the Societe Civile des Terres du Larzac (SCTL) in its effort to develop alternative forest management plans, a group of researchers and extension officers proposed applying a companion modelling approach. The objective was to support forest ... Keywords: Companion modelling, Forest management, Livestock farming, Multi-agent system, Participatory modelling

C. Simon; M. Etienne

2010-11-01T23:59:59.000Z

260

Proceedings of the 2005 ACM symposium on Applied computing  

Science Conference Proceedings (OSTI)

Welcome to the 20th Annual ACM Symposium on Applied Computing (SAC 2005) hosted by the New Mexico Institute of Mining and Technology, Socorro, New Mexico, USA. As the Conference Chair and on behalf of the organizing committee, thank you for participating ...

Hisham M. Haddad; Andrea Omicini; Roger L. Wainwright; Lorie M. Liebrock

2005-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Neutron activation analysis applied to energy and environment  

SciTech Connect

Neutron activation analysis was applied to a number of problems concerned with energy production and the environment. Burning of fossil fuel, the search for new sources of uranium, possible presence of toxic elements in food and water, and the relationship of trace elements to cardiovascular disease are some of the problems in which neutron activation was used. (auth)

Lyon, W.S.

1975-01-01T23:59:59.000Z

262

BEP project for Applied Mathematics/Applied Physics double degree Numerical solution of a three-dimensional electromagnetic  

E-Print Network (OSTI)

-dimensional electromagnetic force field Imagine a quadratic piece of metal, which is subject to a static current flux at its top boundary and insulated at the bottom. Assuming the current flux to be of Gaussian shape and applying suitable boundary conditions, we can derive equations to describe the current flux in the metal

Vuik, Kees

263

A Quick Guide for Applying at Mason Applying online is as easy as 1-2-3!  

E-Print Network (OSTI)

Jobs" from the quick links.. You can search jobs in the following ways: · Keywords - enter your own search terms · Posted Within - a drop-down list will appear ­ select from day, week, or month Innovation Is Tradition Page 1 of 6 11/15/2012 #12;A Quick Guide for Applying at Mason Step 1: Search

264

Environmental Impact and Sustainability Applied General Equilibrium Model  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Environmental Impact and Sustainability Applied General Equilibrium Model (ENVISAGE) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Environmental Impact and Sustainability Applied General Equilibrium Model (ENVISAGE) Agency/Company /Organization: World Bank Sector: Climate Topics: Analysis Tools Complexity/Ease of Use: Advanced Website: go.worldbank.org/ZC77UJYJ50 Related Tools TransportToolkit Prototype Threshold 21 Model General Equilibrium Modeling Package (GEMPACK) ... further results Designed to analyze a variety of issues related to the economics of climate

265

Applied Super Conductor Group, Oxide Molecular Beam Epitaxy Group,  

NLE Websites -- All DOE Office Websites (Extended Search)

AEMG Homepage AEMG Homepage Site Details Homepage Research Publications Presentations Facilities How to Contact Us Other Information Basic Energy Sciences Directorate Links BNL Site Index Can't View PDFs? Advanced Energy Materials Group Applied Superconductivity The applied superconductivity research (past funded by DOE Office of Electricity Delivery and Energy Reliability) is related to modernization of the U.S. power grid. One direction of the modernization is replacement of normal metal (copper, aluminum) transmission lines with High Temperature Superconducting (HTS) cables. Our group concentrates its effort on studying fundamental thermodynamics of nucleation and texture development of thick YBCO layers. High-performance YBCO layer is a critical element of modern second generation (2G) HTS wire.

266

International Institute for Applied Systems Analysis | Open Energy  

Open Energy Info (EERE)

Analysis Analysis Jump to: navigation, search Logo: International Institute for Applied Systems Analysis Name International Institute for Applied Systems Analysis Address Schlossplatz 1, A-2361 Place Laxenburg, Austria Number of employees 201-500 Year founded 1972 Phone number (+43 2236) 807 0 Coordinates 48.0682549°, 16.358201° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.0682549,"lon":16.358201,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

267

Argonne applied mathematicians use INCITE awards to attack energy problems  

NLE Websites -- All DOE Office Websites (Extended Search)

Argonne applied mathematicians use INCITE awards to attack energy problems Argonne applied mathematicians use INCITE awards to attack energy problems March 27, 2013 Tweet EmailPrint What is the best possible power grid configuration for our nation? How can we balance the increasing demands for power while minimizing costs and avoiding waste of resources? Last year, Mihai Anitescu, a computational mathematician in Argonne's Mathematics and Computer Science Division. received DOE funding to establish the Multifaceted Mathematics for Complex Energy Systems (M2ACS) to tackle these questions. As part of the M2ACS research, Anitescu and his colleagues at Argonne are focusing on ways to optimize the effects of randomly changing variables, say, in wind or resource demand. Such variables can number into the billions. And to be useful for energy systems planning, any calculations

268

Generative Design Systems Applied to Low-Energy Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Generative Design Systems Applied to Low-Energy Buildings Generative Design Systems Applied to Low-Energy Buildings Speaker(s): Maria Luisa de Oliveira Gama Caldas Date: March 15, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Paul Mathew Generative Design Systems (GDS) represent a step beyond parametric models, integrating design goals, building simulations and shape generation. In this seminar, present and future research projects on the application of different GDS to low-energy buildings are discussed. The software GENE_ARCH integrates energy simulations with multicriteria search methods such as pareto genetic algorithms, to locate acceptable alternatives that move the current design towards performance goals set by the user. DIVA, a system that integrates parametric geometrical modeling with Radiance, Daysim and

269

Magnetic response to applied electrostatic field in external magnetic field  

E-Print Network (OSTI)

We show, within QED and other possible nonlinear theories, that a static charge localized in a finite domain of space becomes a magnetic dipole, if it is placed in an external (constant and homogeneous) magnetic field in the vacuum. The magnetic moment is quadratic in the charge, depends on its size and is parallel to the external field, provided the charge distribution is at least cylindrically symmetric. This magneto-electric effect is a nonlinear response of the magnetized vacuum to an applied electrostatic field. Referring to a simple example of a spherically-symmetric applied field, the nonlinearly induced current and its magnetic field are found explicitly throughout the space, the pattern of lines of force is depicted, both inside and outside the charge, which resembles that of a standard solenoid of classical magnetostatics.

T. C. Adorno; D. M. Gitman; A. E. Shabad

2013-11-16T23:59:59.000Z

270

Fifth SIAM conference on applied linear algebra. Final report  

SciTech Connect

The SIAM Conferences on Applied Linear Algebra are the centerpiece of activities for the SIAG on Linear Algebra. They are held every three years and bring together a diverse group of applied linear algebraists, representing industry, government and academics in both matrix theory and matrix computations. This sequence of conferences has two related goals: (1) to be useful and interesting to linear algebraists of every area of specialization, and, (2) to develop and expose connections among problems in different areas. Many aspects of the 1994 conference were carefully chosen to enhance interchange between the various groups and yet still provide a solid focus on specialities. The organizing committee adopted a new meeting structure to resolve the conflict between these two goals at earlier meetings in the series. We have prepared this report for others who may wish to consider our structure as an alternative to more traditional arrangements.

Lewis, J.G.; Gilbert, J.R.; Parlett, B.N.

1994-11-16T23:59:59.000Z

271

Applied Science Division annual report, Environmental Research Program FY 1983  

Science Conference Proceedings (OSTI)

The primary concern of the Environmental Research Program is the understanding of pollutant formation, transport, and transformation and the impacts of pollutants on the environment. These impacts include global, regional, and local effects on the atmosphere and hydrosphere, and on certain aspects of human health. This multidisciplinary research program includes fundamental and applied research in physics, chemistry, engineering, and biology, as well as research on the development of advanced methods of measurement and analysis. During FY 1983, research concentrated on atmospheric physics and chemistry, applied physics and laser spectroscopy, combustion theory and phenomena, environmental effects of oil shale processing, freshwater ecology and acid precipitation, trace element analysis for the investigation of present and historical environmental impacts, and a continuing survey of instrumentation for environmental monitoring.

Cairns, E.J.; Novakov, T.

1984-05-01T23:59:59.000Z

272

1984 Review of the Applied Plasma Physics Program  

SciTech Connect

This report describes the present and planned programs of the Division of Applied Plasma Physics (APP), Office of Fusion Energy. The major activities of the division include fusion theory, experimental plasma research, advanced fusion concepts, and the magnetic fusion energy computer network. The planned APP program is consistent with the recently issued Comprehensive Program Management Plan for Magnetic Fusion Energy, which describes the overall objectives and strategy for the development of fusion energy.

1984-09-01T23:59:59.000Z

273

Sodium-Bearing Waste Treatment, Applied Technology Plan  

SciTech Connect

Settlement Agreement between the Department of Energy and the State of Idaho mandates treatment of sodium-bearing waste at the Idaho Nuclear Technology and Engineering Center within the Idaho National Engineering and Environmental Laboratory. One of the requirements of the Settlement Agreement is to complete treatment of sodium-bearing waste by December 31, 2012. Applied technology activities are required to provide the data necessary to complete conceptual design of four identified alternative processes and to select the preferred alternative. To provide a technically defensible path forward for the selection of a treatment process and for the collection of needed data, an applied technology plan is required. This document presents that plan, identifying key elements of the decision process and the steps necessary to obtain the required data in support of both the decision and the conceptual design. The Sodium-Bearing Waste Treatment Applied Technology Plan has been prepared to provide a description/roadmap of the treatment alternative selection process. The plan details the results of risk analyzes and the resulting prioritized uncertainties. It presents a high-level flow diagram governing the technology decision process, as well as detailed roadmaps for each technology. The roadmaps describe the technical steps necessary in obtaining data to quantify and reduce the technical uncertainties associated with each alternative treatment process. This plan also describes the final products that will be delivered to the Department of Energy Idaho Operations Office in support of the office's selection of the final treatment technology.

Lance Lauerhass; Vince C. Maio; S. Kenneth Merrill; Arlin L. Olson; Keith J. Perry

2003-06-01T23:59:59.000Z

274

Opportunities to Apply Phase Change Materials to Building Enclosures Webinar  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 Opportunities to Apply Phase Change Materials to Building Enclosures Welcome to the Webinar! We will start at 2:00 PM Eastern Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 888-950-6757; Pass code: 6420234 1 | Building America Program www.buildingamerica.gov Building America: Introduction November 11, 2011 Chuck Booten Chuck.Booten@nrel.gov Building Technologies Program 2 | Building America Program www.buildingamerica.gov * Reduce energy use in new and existing residential buildings * Promote building science and systems engineering / integration approach * "Do no harm": Ensure safety, health and durability are maintained or improved

275

Applying a Model Transformation Taxonomy to Graph Transformation Technology  

E-Print Network (OSTI)

A taxonomy of model transformations was introduced in [16]. Among others, such a taxonomy can help developers in deciding which language, forma lism, tool or mechanism is best suited to carry out a particular model transformation activity. In this paper we apply the taxonomy to the technique of graph transformation, and we exemplify it by referring to four representative graph transformation tools. As a byproduct of our analysis, we discuss how well each of the considered tools carry out the activity of model transformation.

Tom Mens; Pieter Van Gorp; Dniel Varr; Gabor Karsai

2005-01-01T23:59:59.000Z

276

Towards Applying Reengineering Services to Energy-Efficient Applications  

E-Print Network (OSTI)

AbstractConserving resources and saving energy has become an important issue for information and communication technology. With increasing adoption of smartphones and tablet PCs, reducing energy consumption in mobile computing is of particular significance. User expectations towards their mobile devices are rising, and functionality is increasing. Accordingly, available energy is made a scarce resource. This paper discusses how software reengineering techniques, like dynamic analysis and refactoring, can be applied to the field of energy-aware computing, to monitor, analyze, and optimize the energy profile of mobile applications and devices.

Jan Jelschen Marion Gottschalk

2012-01-01T23:59:59.000Z

277

Applying pomdps to dialog systems in the troubleshooting domain  

E-Print Network (OSTI)

This paper reports on progress applying partially observable Markov decision processes (POMDPs) to a commercial dialog domain: troubleshooting. In the troubleshooting domain, a spoken dialog system helps a user to fix a product such as a failed DSL connection. Past work has argued that a POMDP is a principled approach to building spoken dialog systems in the simpler slot-filling domain; this paper explains how the POMDPs formulation can be extended to the more complex troubleshooting domain. Results from dialog simulation verify that a POMDP outperforms a handcrafted baseline. 1

Jason D. Williams

2007-01-01T23:59:59.000Z

278

Applying Learnable Evolution Model to Heat Exchanger Design  

E-Print Network (OSTI)

A new approach to evolutionary computation, called Learnable Evolution Model (LEM), has been applied to the problem of optimizing tube structures of heat exchangers. In contrast to conventional Darwiniantype evolutionary computation algorithms that use various forms of mutation and/or recombination operators, LEM employs machine learning to guide the process of generating new individuals. A system, ISHED1, based on LEM, automatically searches for the highest capacity heat exchangers under given technical and environmental constraints. The results of experiments have been highly promising, often producing solutions exceeding the best human designs.

Kenneth A. Kaufman; Ryszard S. Michalski

2000-01-01T23:59:59.000Z

279

Loop Quantum Theory Applied to Biology and Nonlinear Whole Biology  

E-Print Network (OSTI)

The loop quantum theory, which constitutes a very small discontinuous space, as new method is applied to biology. The model of protein folding and lungs is proposed. In the model, some known results are used, and four approximate conclusions are obtained: their structures are quantized, their space regions are finite, various singularities correspond to folding and crossed points, and different types of catastrophe exist. Further, based on the inseparability and correlativity of the biological systems, the nonlinear whole biology is proposed, and four basic hypotheses are formed. It may unify reductionism and holism, structuralism and functionalism. Finally, the medical meaning of the theory is discussed briefly.

Yi-Fang Chang

2008-01-02T23:59:59.000Z

280

ENERGY STAR Industrial Plant Certification: Instructions for applying |  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Plant Certification: Instructions for Industrial Plant Certification: Instructions for applying Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Hazardous Gases VASILIS M. FTHENAKIS Department of Applied Science  

Office of Scientific and Technical Information (OSTI)

Mitigation Options for Mitigation Options for Accidental Releases of Hazardous Gases VASILIS M. FTHENAKIS Department of Applied Science Brookhaven National Laboratory Upton, N Y 11973 ABSTRACT The objective of this paper is to review and compare technologies available for mitigation of unconfined releases of toxic and flammable gases. These technologies indude: secondary confinement, de- inventory, vapor barriers, foam spraying, and water sprays/monitors. Guidelines for the design and/or operation of effective post-release mitigation systems and case studies involving actual industrial mitigation systems are also presented. 1. ACCIDENT PREVENTION & MITIGATION OPTIONS Accident prevention and mitigation in the process industries is based on the military concept of defense in

282

Trust and multi-agent systems: applying the "diffuse, default model" of trust to experiments involving artificial agents  

Science Conference Proceedings (OSTI)

We argue that the notion of trust, as it figures in an ethical context, can be illuminated by examining research in artificial intelligence on multi-agent systems in which commitment and trust are modeled. We begin with an analysis of a philosophical ... Keywords: Artificial agents, Default trust, Diffuse trust, Multi-agent systems, Trust

Jeff Buechner; Herman T. Tavani

2011-03-01T23:59:59.000Z

283

EG&G Mound Applied Technologies payroll system  

Science Conference Proceedings (OSTI)

EG&G Mound Applied Technologies, Inc., manages and operates the Mound Facility, Miamisburg, Ohio, under a cost-plus-award-fee contract administered by the Department of Energy`s Albuquerque Field Office. The contractor`s Payroll Department is responsible for prompt payment in the proper amount to all persons entitled to be paid, in compliance with applicable laws, regulations, and legal decisions. The objective was to determine whether controls were in place to avoid erroneous payroll payments. EG&G Mound Applied Technologies, Inc., did not have all the internal controls required by General Accounting Office Title 6, ``Pay, Leave, and Allowances.`` Specifically, they did not have computerized edits, separation of duties and responsibilities, and restricted access to payroll data files. This condition occurred because its managers were not aware of Title 6 requirements. As a result, the contractor could not assure the Department of Energy that payroll costs were processes accurately; and fraud, waste, or abuse of Department of Energy funds could go undetected. Our sample of 212 payroll transactions from a population of 66,000 in FY 1991 disclosed only two minor processing errors and no instances of fraud, waste or abuse.

Not Available

1992-02-07T23:59:59.000Z

284

NEPAREVIEW LAN-ll-0003 2. CATEGORICAL EXCLUSION BEING APPLIED:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEPAREVIEW NEPAREVIEW LAN-ll-0003 2. CATEGORICAL EXCLUSION BEING APPLIED: 10 CFR 1021, Appendix B 6.8: Minor operational changes at an existing facility to minimize waste generation and for reuse of materials. These changes include, but are not limited to, adding filtration and recycle piping to allow reuse of machining oil, setting up a sorting area to improve process efficiency, and segregating two waste streams previously mingled and assigning new identification codes to the two resulting wastes. REGULATORY REQUIREMENTS IN 10 CFR 1021.410 (B): 1. The proposed action fits within a class of actions that is listed in Appendix B to Subpart D. For classes of actions listed in Appendix B, the following conditions are integral elements (Le., to fit within a class), the proposal must not:

285

Saving Energy in Data Centers - Applying Best Practices  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Saving Energy in Data Centers Saving Energy in Data Centers Applying Best Practices Dale Sartor, PE Building Technologies Applications Team Lawrence Berkeley National Laboratory (LBNL) Data Center Energy * Data centers are energy intensive facilities - 10 to 100+ times more energy intensive than other commercial space - Server racks now designed for more than 25+ kW - Surging demand for data storage - Typical facility ~ 1MW, can be > 20 MW - 1.5% of US Electricity consumption in 2006 - Projected to double in next 5 years * Significant data center building boom - Power and cooling constraints in existing facilities - Utility distribution constraints World Data Center Electricity Use - 2000 and 2005 Source: Koomey 2008 Source: Koomey 2008 LBNL Feels the Pain! 0 5 10 15 20 25 30 35 40 MegaWatts

286

Compressed Beamforming Applied to B-Mode Ultrasound Imaging  

E-Print Network (OSTI)

Emerging sonography techniques often imply increasing in the number of transducer elements involved in the imaging process. Consequently, larger amounts of data must be acquired and processed by the beamformer. The significant growth in the amounts of data effects both machinery size and power consumption. Within the classical sampling framework, state of the art systems reduce processing rates by exploiting the bandpass bandwidth of the detected signals. It has been recently shown, that a much more significant sample-rate reduction may be obtained, by treating ultrasound signals within the Finite Rate of Innovation framework. These ideas follow the spirit of Xampling, which combines classic methods from sampling theory with recent developments in Compressed Sensing. Applying such low-rate sampling schemes to individual transducer elements, which detect energy reflected from biological tissues, is limited by the noisy nature of the signals. This often results in erroneous parameter extraction, bringing forwar...

Wagner, Noam; Feuer, Arie; Friedman, Zvi

2012-01-01T23:59:59.000Z

287

Desiccant grain applied to the storage of solar drying potential  

Science Conference Proceedings (OSTI)

Sorption storage of solar heat using a layer of wheat as the desiccant was analyzed by means of a deep-bed model. Intended to be applied to solar-assisted in-storage drying of agricultural bulk materials, the probability of the persistence of unfavorable weather periods was quantified statistically for Potsdam for the month of August, as an example. Simulation results demonstrate that a relative humidity of the drying air of 65% can be maintained day and night for weeks without combustion of fossil fuels. Using a simple strategy of control, periods with insufficient solar radiation can be bridged over. The desiccant grain is not endangered by mold growth as a matter of principle. Simple solar air heaters can be used to avoid economic losses due to overdrying and to reduce the danger of decay to a minimum even at unfavorable climatic conditions.

Ziegler, T.; Richter, I.G.; Pecenka, R.

1999-09-01T23:59:59.000Z

288

Dynamic Decision Making for Graphical Models Applied to Oil Exploration  

E-Print Network (OSTI)

We present a framework for sequential decision making in problems described by graphical models. The setting is given by dependent discrete random variables with associated costs or revenues. In our examples, the dependent variables are the potential outcomes (oil, gas or dry) when drilling a petroleum well. The goal is to develop an optimal selection strategy that incorporates a chosen utility function within an approximated dynamic programming scheme. We propose and compare different approximations, from simple heuristics to more complex iterative schemes, and we discuss their computational properties. We apply our strategies to oil exploration over multiple prospects modeled by a directed acyclic graph, and to a reservoir drilling decision problem modeled by a Markov random field. The results show that the suggested strategies clearly improve the simpler intuitive constructions, and this is useful when selecting exploration policies.

Martinelli, Gabriele; Hauge, Ragnar

2012-01-01T23:59:59.000Z

289

Distributed control applied to combined electricity and natural gas infrastructures  

E-Print Network (OSTI)

Abstract The optimization of combined electricity and natural gas systems is addressed in this paper. The two networks are connected via energy hubs. Using the energy hub concept, the interactions between the different infrastructures can be analyzed. A system consisting of several interconnected hubs forms a distributed power generation structure where each hub is controlled by its respective control agent. Recently, a distributed control method has been applied to such a system. The overall optimization problem including the entire system is decomposed into subproblems according to the control agents. In this paper, a parallel and serial version of that method is discussed. Simulation results are obtained through experiments on a three-hub benchmark system. I.

Michle Arnold; Rudy R. Negenborn; Gran Andersson; Bart De Schutter

2008-01-01T23:59:59.000Z

290

GENERIC MODEL FOR MAGNETIC EXPLOSIONS APPLIED TO SOLAR FLARES  

Science Conference Proceedings (OSTI)

An accepted model for magnetospheric substorms is proposed as the basis for a generic model for magnetic explosions and is applied to solar flares. The model involves widely separated energy-release and particle-acceleration regions, with energy transported Alfvenically between them. On a global scale, these regions are coupled by a large-scale current that is set up during the explosion by redirection of pre-existing current associated with the stored magnetic energy. The explosion-related current is driven by an electromotive force (EMF) due to the changing magnetic flux enclosed by this current. The current path and the EMF are identified for an idealized quadrupolar model for a flare.

Melrose, D. B. [Sydney Institute for Astronomy, School of Physics, University of Sydney, NSW 2006 (Australia)

2012-04-10T23:59:59.000Z

291

Nuclear safety as applied to space power reactor systems  

SciTech Connect

To develop a strategy for incorporating and demonstrating safety, it is necessary to enumerate the unique aspects of space power reactor systems from a safety standpoint. These features must be differentiated from terrestrial nuclear power plants so that our experience can be applied properly. Some ideas can then be developed on how safe designs can be achieved so that they are safe and perceived to be safe by the public. These ideas include operating only after achieving a stable orbit, developing an inherently safe design, ''designing'' in safety from the start and managing the system development (design) so that it is perceived safe. These and other ideas are explored further in this paper.

Cummings, G.E.

1987-01-01T23:59:59.000Z

292

Apply by March 31 for nontraditional student scholarship  

NLE Websites -- All DOE Office Websites (Extended Search)

Nontraditional student scholarship Nontraditional student scholarship Apply by March 31 for nontraditional student scholarship The scholarship will provide funds to employees or students pursuing a certificate, a two-year-degree, or a baccalaureate degree at NNMC. March 16, 2011 Nontraditional student scholarships Nontraditional student scholarships Contact Communications Office (505) 667-7000 LOS ALAMOS, New Mexico, March 16, 2011-Employees of Los Alamos National Laboratory or students working at the Laboratory who have interrupted their education and now want to obtain a degree from Northern New Mexico College (NNMC) have a chance to receive a $750 scholarship. The Christopher Montalvo/LANL Scholarship, offered through the NNMC Foundation, will provide funds to Lab employees or students pursuing a

293

Applying Risk Communication to the Transportation of Radioactive Materials  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Spokesperson Training 6/3/2010 Spokesperson Training 6/3/2010 May 2010 1 National Transportation Stakeholder Forum Chicago, Illinois May 2010 y May 2010 Page 1 Applying Risk Communication Principles Presented by: Ron Edmond Oak Ridge Institute for Science and Education May 2010 Page 2 Spokesperson Training 6/3/2010 May 2010 2  Participants should expect to gain the following skills: following skills:  How to recognize how the stakeholders prefer to receive information  How to integrate risk communication principles into individual communication  How to recognize the importance of earning trust and credibility y  How to identify stakeholders  How to answer questions using a variety of templates designed to keep messages focused May 2010 Page 3 The Chinese word for crisis contains two

294

Applied wind energy research at the National Wind Technology Center  

DOE Green Energy (OSTI)

Applied research activities at the National Wind Technology Center are divided into several technical disciplines. Not surprisingly, these engineering and science disciplines highlight the technology similarities between aircraft and wind turbine design requirements. More often than not, wind turbines are assumed to be a subset of the much larger and more comprehensive list of well understood aerospace engineering accomplishments and it is difficult for the general public to understand the poor performance history of wind turbines in sustained operation. Often overlooked are the severe environmental conditions and operational demands placed on turbine designs which define unique requirements beyond typical aerospace applications. It is the role of the National Wind Technology Center to investigate and quantify the underlying physical phenomena which make the wind turbine design problem unique and to provide the technology advancements necessary to overcome current operational limitations. This paper provides a brief overview of research areas involved with the design of wind turbines.

Robinson, M C; Tu, P

1996-06-01T23:59:59.000Z

295

Radiological impact of phosphogypsum applied to soils under bahiagrass pasture  

SciTech Connect

Phosphogypsum (PG), a by-product in the manufacture of phosphoric acid, is primarily gypsum. The USEPA regulates the removal of PG from stacks because it contains {sup 226}Ra. Measures to quantify the transfer of radioactivity in PG to the agricultural environment are needed. The objective of the study was to collect data needed for assessment of the radiological impacts of PG applied to two Florida soils. Field experiments using 0,10, and 20 mg PG ha{sup {minus}1} were conducted for 2 yr at the University of Florida RCREC, Ona, FL. PG-attributable levels of {sup 226}Ra, {sup 210}Pb, and {sup 210}Po were observed in the top 5-cm layer of the soils. Surface {sup 222}Rn flux increased by 0.067 to 0.078 mBq m{sup {minus}2} s{sup {minus}1} per Mg PG ha{sup {minus}1}. Radionuclide concentrations in regrowth forages increased at one site where the first post-treatment rainfall did not occur until 20 d after PG application. In mature forages, radionuclide levels generally increased with PG in both soils. No effects on radionuclide levels in subsurface water down to 90 cm and only slight effects on gamma radiation and on airborne {sup 222}Rn measured 1 m from the ground were noted. The linear regression slope for a radiological parameter normalized with respect to the pertinent radionuclide applied per m{sup 2} per Mg PG ha{sup {minus}1} is proposed as the transfer factor (TF) of that radionuclide in PG to the agricultural medium in terms of that parameter. The TF permits the calculation of the potential effect on certain radiological parameters of PGs containing different radionuclide concentrations from the one used in this study.

Alcordo, I.S.; Rechcigl, J.E.; Roessler, C.E.; Littell, R.C.

1999-10-01T23:59:59.000Z

296

AN ADVANCED TOOL FOR APPLIED INTEGRATED SAFETY MANAGEMENT  

SciTech Connect

WESKEM, LLC's Environmental, Safety and Health (ES&H) Department had previously assessed that a lack of consistency, poor communication and using antiquated communication tools could result in varying operating practices, as well as a failure to capture and disseminate appropriate Integrated Safety Management (ISM) information. To address these issues, the ES&H Department established an Activity Hazard Review (AHR)/Activity Hazard Analysis (AHA) process for systematically identifying, assessing, and controlling hazards associated with project work activities during work planning and execution. Depending on the scope of a project, information from field walkdowns and table-top meetings are collected on an AHR form. The AHA then documents the potential failure and consequence scenarios for a particular hazard. Also, the AHA recommends whether the type of mitigation appears appropriate or whether additional controls should be implemented. Since the application is web based, the information is captured into a single system and organized according to the >200 work activities already recorded in the database. Using the streamlined AHA method improved cycle time from over four hours to an average of one hour, allowing more time to analyze unique hazards and develop appropriate controls. Also, the enhanced configuration control created a readily available AHA library to research and utilize along with standardizing hazard analysis and control selection across four separate work sites located in Kentucky and Tennessee. The AHR/AHA system provides an applied example of how the ISM concept evolved into a standardized field-deployed tool yielding considerable efficiency gains in project planning and resource utilization. Employee safety is preserved through detailed planning that now requires only a portion of the time previously necessary. The available resources can then be applied to implementing appropriate engineering, administrative and personal protective equipment controls in the field.

Potts, T. Todd; Hylko, James M.; Douglas, Terence A.

2003-02-27T23:59:59.000Z

297

5 ILLUMINATING DISCOVERY Researcher warns of high  

E-Print Network (OSTI)

-pick, wholesale, processing, juice, organic, and export sectors of the apple industry. Cornell apple breeder Susan, biofuel feedstock labeling, and germination issues and seed treatments and their potential phytotoxic

Keinan, Alon

298

NIST Light Source Illuminates Fusion Power Diagnostics  

Science Conference Proceedings (OSTI)

... Their measurement tool also is used in incandescent light bulbsit's the element tungsten. Published with permission of ITER. ...

2012-06-05T23:59:59.000Z

299

Advanced illumination techniques for GPU volume raycasting  

Science Conference Proceedings (OSTI)

Volume raycasting techniques are important for both visual arts and visualization. They allow an efficient generation of visual effects and the visualization of scientific data obtained by tomography or numerical simulation. Thanks to their flexibility, ...

Markus Hadwiger; Patric Ljung; Christof Rezk Salama; Timo Ropinski

2008-12-01T23:59:59.000Z

300

Defeating passive eavesdropping with quantum illumination  

E-Print Network (OSTI)

A two-way protocol for defeating passive eavesdropping is proposed. For each information bit, Alice sends Bob T sec of signal-beam output from a spontaneous parametric down-converter over a pure-loss channel while retaining ...

Shapiro, Jeffrey H.

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

7.0 Flatten Illumination (Background subtraction)  

Science Conference Proceedings (OSTI)

... the paste control by showing the window: Windows -> Show Paste ... button in the B&C window) , which will ... the photograph holding a flash above his ...

302

Rod-to-rod spacing illuminating device  

DOE Patents (OSTI)

A system for obtaining an image of an object includes at least one light source having an incandescent filament. An image of the filament is projected onto an object to be observed. Using light reflected from the object, an image of the object is generated. Such a system may employ a television camera to generate the image, and is especially suited for remote observation of objects.

Fodor, G.; Gaal, P.S.

1984-03-14T23:59:59.000Z

303

ILLUMINATION OF 80-INCH BUBBLE CHAMBER  

SciTech Connect

A cylindrical condensing system whose geometry allows light to be collected along the length of narrow tubular sources and to pass through a restricted port area is used. The quantity of light collected is many times that possible to obtain with axially symmetric lenses. The optical arrangement is described. Other unique features include the use of plano reilectors to extend optically the flash tube and condenser lengths and the provision of a spot plate to eliminate surface reflections from the chamber window. (auth)

Rosin, S.

1962-01-01T23:59:59.000Z

304

booktitle Illuminating Engineering Society IES Annual Conference  

NLE Websites -- All DOE Office Websites (Extended Search)

above the reference window condition which was defined as the same glazed clerestory window but with an interior Venetian blind slat angle set to the cut off angle for the...

305

Condenser for illuminating a ring field  

DOE Patents (OSTI)

A series of segments of a parent aspheric mirror having one foci at at a si-point source of radiation and the other foci at the radius of a ring field have all but one or all of their beams translated and rotated by sets of mirrors such that all of the beams pass through the real entrance pupil of a ring field camera about one of the beams and fall onto the ring field radius as a coincident image as an arc of the ring field.

Sweatt, William C. (Albuquerque, NM)

1994-01-01T23:59:59.000Z

306

Condenser for illuminating a ring field  

DOE Patents (OSTI)

A series of segments of a parent aspheric mirror having one foci at a point source of radiation and the other foci at the radius of a ring field have all but one or all of their beams translated and rotated by sets of mirrors such that all of the beams pass through the real entrance pupil of a ring field camera about one of the beams and fall onto the ring field radius as a coincident image as an arc of the ring field. 5 figs.

Sweatt, W.C.

1994-11-01T23:59:59.000Z

307

White LED for general illumination applications  

E-Print Network (OSTI)

In the 21st century, mankind faces problem of energy crisis through depletion of fossil fuels as well as global warning through the production of excessive greenhouse gases. Hence, there is an urgent need to look for new ...

Li, Fung Yuen Ken

2007-01-01T23:59:59.000Z

308

United Illuminating Co | Open Energy Information  

Open Energy Info (EERE)

Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1a1 Energy Information Administration...

309

Tailored edge-ray reflectors for illumination  

SciTech Connect

The edge-ray principle can be used to tailor a reflector. However, one set of edge rays already fully determines the reflector profile. We present a design method for tailoring compact compound elliptical concentrator (CEC)-type reflectors to a given source and a desired angular power distribution. Two reflected images of the source, one on each side of the source, contribute together with the direct radiation from the source to produce the desired power distribution. We determine the reflector profile by numerically solving a differential equation. No optimization is required. Beyond the angular region in which the power distribution can be strictly controlled, the power drops to zero in a finite decay range. This decay range becomes narrower as the reflector increases in size. We show a reflector for producing a strictly constant irradiance from [minus] 43 to 43 deg from a cylindrical source of constant brightness. The reflector extends to a maximum distance of 8 source diameters. No power is radiated beyond [plus minus] 50 deg.

Ries, H.R.; Winston, R. (Enrico Fermi Institute and Department of Physics, The University of Chicago, Chicago, Illinois 60637 (United States))

1994-04-01T23:59:59.000Z

310

1) Apply directly to the department in which you want to pursue a PhD  

E-Print Network (OSTI)

1) Apply directly to the department in which you want to pursue apply directly to the I- WATER program. Download and complete our application

311

Research Directed at Developing a Classical Theory to Describe Isotope Separation of Polyatomic Molecules Illuminated by Intense Infrared Radiation. Final Report for period May 7, 1979 to September 30, 1979; Extension December 31, 1997  

DOE R&D Accomplishments (OSTI)

This final report describes research on the theory of isotope separation produced by the illumination of polyatomic molecules by intense infrared laser radiation. This process is investigated by treating the molecule, sulfur hexafluoride, as a system of seven classical particles that obey the Newtonian equations of motion. A minicomputer is used to integrate these differential equations. The particles are acted on by interatomic forces, and by the time-dependent electric field of the laser. We have a very satisfactory expression for the interaction of the laser and the molecule which is compatible with infrared absorption and spectroscopic data. The interatomic potential is capable of improvement, and progress on this problem is still being made. We have made several computer runs of the dynamical behavior of the molecule using a reasonably good model for the interatomic force law. For the laser parameters chosen, we find that typically the molecule passes quickly through the resonance region into the quasi-continuum and even well into the real continuum before dissociation actually occurs. When viewed on a display terminal, the motions are exceedingly complex. As an aid to the visualization of the process, we have made a number of 16 mm movies depicting a three-dimensional representation of the motion of the seven particles. These show even more clearly the enormous complexity of the motions, and make clear the desirability of finding ways of characterizing the motion in simple ways without giving all of the numerical detail. One of the ways to do this is to introduce statistical parameters such as a temperature associated with the distribution of kinetic energies of the single particle. We have made such an analysis of our data runs, and have found favorable indications that such methods will prove useful in keeping track of the dynamical histories.

Lamb, W. E. Jr.

1981-12-00T23:59:59.000Z

312

Total Risk Approach in Applying PRA to Criticality Safety  

SciTech Connect

As nuclear industry continues marching from an expert-base support to more procedure-base support, it is important to revisit the total risk concept to criticality safety. A key objective of criticality safety is to minimize total criticality accident risk. The purpose of this paper is to assess key constituents of total risk concept pertaining to criticality safety from an operations support perspective and to suggest a risk-informed means of utilizing criticality safety resources for minimizing total risk. A PRA methodology was used to assist this assessment. The criticality accident history was assessed to provide a framework for our evaluation. In supporting operations, the work of criticality safety engineers ranges from knowing the scope and configurations of a proposed operation, performing criticality hazards assessment to derive effective controls, assisting in training operators, response to floor questions, surveillance to ensure implementation of criticality controls, and response to criticality mishaps. In a compliance environment, the resource of criticality safety engineers is increasingly being directed towards tedious documentation effort to meet some regulatory requirements to the effect of weakening the floor support for criticality safety. By applying a fault tree model to identify the major contributors of criticality accidents, a total risk picture is obtained to address relative merits of various actions. Overall, human failure is the key culprit in causing criticality accidents. Factors such as failure to follow procedures, lacks of training, lack of expert support at the floor level etc. are main contributors. Other causes may include lack of effective criticality controls such as inadequate criticality safety evaluation. Not all of the causes are equally important in contributing to criticality mishaps. Applying the limited resources to strengthen the weak links would reduce risk more than continuing emphasis on the strong links of criticality safety support. For example, some compliance failures such as lack of detailed documentation may not be as relevant as the lack of floor support in answering operator's questions during operations. Misuse of resources in reducing lesser causes rather than on major causes of criticality accidents is not risk free without severe consequences. A regulatory mandate without due consideration of total risk may have its opposite effect of increasing the total risk of an accident. A lesson is to be learned here. For regulatory standard/guide development, use of ANS/ANSI standard process, which provides the pedigree of consensus participation, is recommended.

Huang, S T

2005-03-24T23:59:59.000Z

313

CX-010574: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Applied Materials - Kerf-less Crystaline-Silicon Photovoltaic: Gas to Modules CX(s) Applied: B3.6 Date: 05162013 Location(s): California,...

314

CX-009418: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Categorical Exclusion Determination CX-009418: Categorical Exclusion Determination Electron Beam Melting CX(s) Applied: None applied. Date: 10302012 Location(s): Missouri...

315

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Applied Materials - Novel High Energy Density Lithium Ion Cell Designs CX(s) Applied: B3.6 Date: 06022010 Location(s): California...

316

CX-003079: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-003079: Categorical Exclusion Determination Applied Materials - Novel High Energy Density Lithium Ion Cell Designs CX(s) Applied: B3.6 Date: 06022010 Location(s):...

317

Funded Projects NEPA Does Not Apply Categorical Exclusions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 30, 2010 June 30, 2010 Page 1 # of ARRA Funded Projects NEPA Does Not Apply Categorical Exclusions (CE) CE Pending CE Done Environmental Assessments (EA) EA Pending EA Done Environmental Impact Statements (EIS) EIS Pending EIS Done All NEPA Actions All Withdrawn Actions All Pending NEPA Actions All Completed NEPA Actions OVERALL TOTALS: 215,159 4,240 175,498 821 174,677 9,808 749 9,059 829 36 793 186,135 1,403 1,606 184,529 Department of Agriculture (USDA): 132,570 254 93,586 37 93,549 1,303 3 1,300 150 0 150 95,039 110 40 94,999 Agricultural Research Service (ARS) 41 2 38 0 38 1 0 1 0 0 0 39 0 0 39 Farm Service Agency (FSA) 38,592 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Food and Nutrition Service (FNS) 251 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Foreign Agricultural Service (FAS) 3 0 3 0 3 0 0 0 0 0 0 3 0 0 3 U.S. Forest Service (USFS) 705 252 1,408 2 1,406 533 1 532 121 0 121 2,062 8 3 2,059 Natural Resources Conservation Service (NRCS)

318

Funded Projects NEPA Does Not Apply Categorical Exclusions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 31, 2010 December 31, 2010 Page 1 # of ARRA Funded Projects NEPA Does Not Apply Categorical Exclusions (CE) CE Pending CE Done Environmental Assessments (EA) EA Pending EA Done Environmental Impact Statements (EIS) EIS Pending EIS Done All NEPA Actions All Withdrawn Actions All Pending NEPA Actions All Completed NEPA Actions OVERALL TOTALS: 272,037 4,289 181,061 190 180,871 6,978 362 6,616 870 35 835 188,909 1,674 589 188,322 Department of Agriculture (USDA): 184,065 254 96,907 9 96,898 1,508 0 1,508 150 0 150 98,565 254 9 98,556 Agricultural Research Service (ARS) 41 2 38 0 38 1 0 1 0 0 0 39 0 0 39 Farm Service Agency (FSA) 86,564 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Food and Nutrition Service (FNS) 251 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Foreign Agricultural Service (FAS) 3 0 4 0 4 0 0 0 0 0 0 4 0 0 4 U.S. Forest Service (USFS) 705 252 1,408 0 1,408 533 0 533 121 0 121 2,062 8 0 2,062 Natural Resources Conservation Service (NRCS)

319

Applying a Modified Triad Approach to Investigate Wastewater lines  

Science Conference Proceedings (OSTI)

Approximately 20 miles of wastewater lines are below grade at an active military Base. This piping network feeds or fed domestic or industrial wastewater treatment plants on the Base. Past wastewater line investigations indicated potential contaminant releases to soil and groundwater. Further environmental assessment was recommended to characterize the lines because of possible releases. A Remedial Investigation (RI) using random sampling or use of sampling points spaced at predetermined distances along the entire length of the wastewater lines, however, would be inefficient and cost prohibitive. To accomplish RI goals efficiently and within budget, a modified Triad approach was used to design a defensible sampling and analysis plan and perform the investigation. The RI task was successfully executed and resulted in a reduced fieldwork schedule, and sampling and analytical costs. Results indicated that no major releases occurred at the biased sampling points. It was reasonably extrapolated that since releases did not occur at the most likely locations, then the entire length of a particular wastewater line segment was unlikely to have contaminated soil or groundwater and was recommended for no further action. A determination of no further action was recommended for the majority of the waste lines after completing the investigation. The modified Triad approach was successful and a similar approach could be applied to investigate wastewater lines on other United States Department of Defense or Department of Energy facilities. (authors)

Pawlowicz, R.; Urizar, L. [Bechtel National, Inc., 1230 Columbia St., Suite 400, San Diego, CA 92101 (United States); Blanchard, S. [Brown and Caldwell, 9665 Chesapeake Drive, Suite 201, San Diego, CA 92123 (United States); Jacobsen, K. [Naval Facilities Engineering Command, Southwest 1220 Pacific Highway, San Diego, CA 92132 (United States); Scholfield, J. [EarthTech, 841 Bishop St., Suite 500, Honolulu, HI 96813 (United States)

2006-07-01T23:59:59.000Z

320

A Hygrothermal Risk Analysis Applied to Residential Unvented Attics  

SciTech Connect

Aresidential building, constructed with an unvented attic, is acommonroof assembly in the United States.The expected hygrothermal performance and service life of the roof are difficult to estimate due to a number of varying parameters.Typical parameters expected to vary are the climate, direction, and slope of the roof as well as the radiation properties of the surface material. Furthermore, influential parameters are indoor moisture excess, air leakages through the attic floor, and leakages from air-handling unit and ventilation ducts. In addition, the type of building materials such as the insulation material and closed or open cell spray polyurethane foam will influence the future performance of the roof. A development of a simulation model of the roof assembly will enable a risk and sensitivity analysis, in which the most important varying parameters on the hygrothermal performance can be determined. The model is designed to perform probabilistic simulations using mathematical and hygrothermal calculation tools. The varying input parameters can be chosen from existing measurements, simulations, or standards. An analysis is applied to determine the risk of consequences, such as mold growth, rot, or energy demand of the HVAC unit. Furthermore, the future performance of the roof can be simulated in different climates to facilitate the design of an efficient and reliable roof construction with the most suitable technical solution and to determine the most appropriate building materials for a given climate

Pallin, Simon B [ORNL] [ORNL; Kehrer, Manfred [ORNL] [ORNL

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Predicting plant available nitrogen in land-applied biosolids  

Science Conference Proceedings (OSTI)

The rate at which biosolids (municipal sewage sludge) may be applied to land is dependent on factors including concentrations of metals, pathogens, toxic organic compounds, and nutrients. Where other properties are not limiting, land application rates are often based on matching crop N needs with the plant available N (PAN). The objectives of this study were to quantify biosolids PAN under field conditions and to propose methods including computer simulation to estimate biosolids PAN in a land application program. Six biosolids were evaluated over a 2-yr period. Laboratory incubations were used to obtain decomposition kinetics. Field studies provided a relationship between inorganic fertilizer N rate and sorghum sudangrass [Sorghum bicolor (L.) Moench] tissue N concentration, which was used to determine biosolids PAN in a Captina silt loam soil. Biosolids PAN released during the field experiment was linearly related to biosolids C/N ratio, organic N, or total N. Computer model predictions of PAN in the field were also linearly related to field estimates of biosolids PAN. Decay series obtained using the computer model, average biosolids decomposition kinetics, and average application site weather were very similar to decay series obtained using the computer model, actual weather, and kinetic data. Either decay series and routine analytical data for biosolids are proposed to estimate PAN for a given situation. Use of the computer model and weather data makes the approach site-specific, while analytical data for a specific biosolids makes the approach biosolids-specific.

Gilmour, J.T.; Skinner, V.

1999-08-01T23:59:59.000Z

322

Retrocommissioning Case Study - Applying Building Selection Criteria for Maximum Results  

E-Print Network (OSTI)

Commissioning of existing buildings, or retrocommissioning is a systematic process to identify operational and maintenance (O&M) improvements that optimize building performance and ensure that building systems function together efficiently and effectively (Haasl, Sharp 1999). This paper presents a case study of a utility-funded retrocommissioning evaluation on a 125,000 SF office facility in La Mesa, California. The commissioning process consisted of site visits, interviews with facility staff, data collection and analysis, recommendation of energy conservation measures, and verification of savings. The study identified 13 deficiencies and recommended a suite of three O&M measures, one capital improvement measure and five other measures. The measures selected and implemented by the owner resulted in annual projected savings of 238,000 kWh (9.9%) and utility cost savings of $20,000 (6.9%)1, with a simple payback of 0.7 years. The project also demonstrated the value of applying rigorous building selection criteria to obtain cost-effective results. This paper profiles the project and discusses lesson learned.

Luskay, L.; Haasl, T.; Irvine, L.; Frey, D.

2002-01-01T23:59:59.000Z

323

Applying Human Factors during the SIS Life Cycle  

SciTech Connect

Safety Instrumented Systems (SIS) are widely used in U.S. Department of Energy's (DOE) nonreactor nuclear facilities for safety-critical applications. Although use of the SIS technology and computer-based digital controls, can improve performance and safety, it potentially introduces additional complexities, such as failure modes that are not readily detectable. Either automated actions or manual (operator) actions may be required to complete the safety instrumented function to place the process in a safe state or mitigate a hazard in response to an alarm or indication. DOE will issue a new standard, Application of Safety Instrumented Systems Used at DOE Nonreactor Nuclear Facilities, to provide guidance for the design, procurement, installation, testing, maintenance, operation, and quality assurance of SIS used in safety significant functions at DOE nonreactor nuclear facilities. The DOE standard focuses on utilizing the process industry consensus standard, American National Standards Institute/ International Society of Automation (ANSI/ISA) 84.00.01, Functional Safety: Safety Instrumented Systems for the Process Industry Sector, to support reliable SIS design throughout the DOE complex. SIS design must take into account human-machine interfaces and their limitations and follow good human factors engineering (HFE) practices. HFE encompasses many diverse areas (e.g., information display, user-system interaction, alarm management, operator response, control room design, and system maintainability), which affect all aspects of system development and modification. This paper presents how the HFE processes and principles apply throughout the SIS life cycle to support the design and use of SIS at DOE nonreactor nuclear facilities.

Avery, K.

2010-05-05T23:59:59.000Z

324

Sensitivity and uncertainty analysis applied to the JHR reactivity prediction  

SciTech Connect

The on-going AMMON program in EOLE reactor at CEA Cadarache (France) provides experimental results to qualify the HORUS-3D/N neutronics calculation scheme used for the design and safety studies of the new Material Testing Jules Horowitz Reactor (JHR). This paper presents the determination of technological and nuclear data uncertainties on the core reactivity and the propagation of the latter from the AMMON experiment to JHR. The technological uncertainty propagation was performed with a direct perturbation methodology using the 3D French stochastic code TRIPOLI4 and a statistical methodology using the 2D French deterministic code APOLLO2-MOC which leads to a value of 289 pcm (1{sigma}). The Nuclear Data uncertainty propagation relies on a sensitivity study on the main isotopes and the use of a retroactive marginalization method applied to the JEFF 3.1.1 {sup 27}Al evaluation in order to obtain a realistic multi-group covariance matrix associated with the considered evaluation. This nuclear data uncertainty propagation leads to a K{sub eff} uncertainty of 624 pcm for the JHR core and 684 pcm for the AMMON reference configuration core. Finally, transposition and reduction of the prior uncertainty were made using the Representativity method which demonstrates the similarity of the AMMON experiment with JHR (the representativity factor is 0.95). The final impact of JEFF 3.1.1 nuclear data on the Begin Of Life (BOL) JHR reactivity calculated by the HORUS-3D/N V4.0 is a bias of +216 pcm with an associated posterior uncertainty of 304 pcm (1{sigma}). (authors)

Leray, O.; Vaglio-Gaudard, C.; Hudelot, J. P.; Santamarina, A.; Noguere, G. [CEA, DER, SPRC, F-13108 St Paul-Lez-Durance (France); Di-Salvo, J. [CEA, DER, SPEx, F-13108 St Paul-Lez-Durance (France)

2012-07-01T23:59:59.000Z

325

A Bidirectional Coupling Procedure Applied to Multiscale Respiratory Modeling  

SciTech Connect

In this study, we present a novel multiscale computational framework for efficiently linking multiple lower-dimensional models describing the distal lung mechanics to imaging-based 3D computational fluid dynamics (CFD) models of the upper pulmonary airways in order to incorporate physiologically appropriate outlet boundary conditions. The framework is an extension of the Modified Newtons Method with nonlinear Krylov accelerator developed by Carlson and Miller [1, 2, 3]. Our extensions include the retention of subspace information over multiple timesteps, and a special correction at the end of a timestep that allows for corrections to be accepted with verified low residual with as little as a single residual evaluation per timestep on average. In the case of a single residual evaluation per timestep, the method has zero additional computational cost compared to uncoupled or unidirectionally coupled simulations. We expect these enhancements to be generally applicable to other multiscale coupling applications where timestepping occurs. In addition we have developed a pressure-drop residual which allows for stable coupling of flows between a 3D incompressible CFD application and another (lower-dimensional) fluid system. We expect this residual to also be useful for coupling non-respiratory incompressible fluid applications, such as multiscale simulations involving blood flow. The lower-dimensional models that are considered in this study are sets of simple ordinary differential equations (ODEs) representing the compliant mechanics of symmetric human pulmonary airway trees. To validate the method, we compare the predictions of hybrid CFD-ODE models against an ODE-only model of pulmonary airflow in an idealized geometry. Subsequently, we couple multiple sets of ODEs describing the distal lung to an imaging-based human lung geometry. Boundary conditions in these models consist of atmospheric pressure at the mouth and intrapleural pressure applied to the multiple sets of ODEs. In both the simplified geometry and in the imaging-based geometry, the performance of the method was comparable to that of monolithic schemes, in most cases requiring only a single CFD evaluation per time step. Thus, this new accelerator allows us to begin combining pulmonary CFD models with lower-dimensional models of pulmonary mechanics with little computational overhead. Moreover, because the CFD and lower-dimensional models are totally separate, this framework affords great flexibility in terms of the type and breadth of the adopted lower-dimensional model, allowing the biomedical researcher to appropriately focus on model design. Research funded by the National Heart Lung and Blood Institute Award 1RO1HL073598.

Kuprat, Andrew P.; Kabilan, Senthil; Carson, James P.; Corley, Richard A.; Einstein, Daniel R.

2013-07-01T23:59:59.000Z

326

Applied Mathematics Conferences and Workshops | U.S. DOE Office of Science  

Office of Science (SC) Website

Applied Applied Mathematics » Applied Mathematics Conferences And Workshops Advanced Scientific Computing Research (ASCR) ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced Computing (SciDAC) Computational Science Graduate Fellowship (CSGF) ASCR SBIR-STTR Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) News & Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-7486 F: (301) 903-4846 E: sc.ascr@science.doe.gov More Information » Applied Mathematics

327

CSP 581: Applied AI Programming Peter Norvig, Paradigms of AI Programming: Case Studies in Common Lisp  

E-Print Network (OSTI)

CSP 581: Applied AI Programming Texts Peter Norvig, Paradigms of AI Programming: Case Studies LISP Programs 4 hours Total 42 hours CSP 581: Applied AI Programming - CS Dept, Illinois Insti... 1

Heller, Barbara

328

Proceedings of the 28th Annual ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 28th International Symposium on Applied Computing (SAC 2013). For the past 27 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

Sung Y. Shin, Jos Carlos Maldonado

2013-03-01T23:59:59.000Z

329

Performance Evaluation Statistics Applied to Derived Fields of NWP Model Forecasts  

Science Conference Proceedings (OSTI)

NWP model skill as obtained from the standard statistics applied to derived atmospheric fields such as thermal advection and moisture convergence is different from that obtained by the same statistics applied to basic model output fields such as ...

Prakki Satyamurty; Daniel Pires Bittencourt

1999-10-01T23:59:59.000Z

330

Applying engineering principles to the design and construction of transcriptional devices  

E-Print Network (OSTI)

The aim of this thesis is to consider how fundamental engineering principles might best be applied to the design and construction of engineered biological systems. I begin by applying these principles to a key application ...

Shetty, Reshma P. (Reshma Padmini)

2008-01-01T23:59:59.000Z

331

Applying engineering principles to the design and construction of transcriptional devices  

E-Print Network (OSTI)

The aim of this thesis is to consider how fundamental engineering principles might best be applied to the design and construction of engineered biological systems. I begin by applying these principles to a key application ...

Shetty, Reshma P

2008-05-27T23:59:59.000Z

332

Enforcement Letter, EG&G Mound Applied Technologies- August 22, 1996  

Energy.gov (U.S. Department of Energy (DOE))

Issued to EG&G Mound Applied Technologies related to the Inadvertent Transfer of Radiological Contamination at the Mound Plant

333

Deep Vadose Zone Applied Field Research Initiative (DVZ-AFRI) | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deep Vadose Zone Applied Field Research Initiative (DVZ-AFRI) Deep Vadose Zone Applied Field Research Initiative (DVZ-AFRI) Deep Vadose Zone Applied Field Research Initiative (DVZ-AFRI) Deep Vadose Zone Applied Field Research Initiative (DVZ-AFRI) Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of preventing contamination in the deep vadose zone from reaching groundwater. Led by the Pacific Northwest National Laboratory, the Initiative is a collaborative effort that leverages Department of Energy (DOE) investments in basic science and applied research and the work of site contractors to address the complex deep vadose zone contamination challenges. The Mission of the Deep Vadose

334

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Geological Sciences Geological Sciences Atomic-scale structure of the orthoclase (001)-water interface measured with high-resolution x-ray reflectivity P. Fenter, H. Teng, P. Geissbühler, J.M. Hanchar, K.L. Nagy, and N.C. Sturchio Chemical analysis of individual interplanetary dust particles G.J. Flynn, S.R. Sutton, M. Rivers, P. Eng, and M. Newville Diffusion-limited biotransformation of metal contaminants in soils/sediments: chromium T. Tokunaga, J. Wan, D. Joyner, T. Hazen, M. Firestone, E. Schwartz, S. Sutton, and M. Newville Investigation of meteorite porosity by computed microtomography G.J. Flynn, M. Rivers, and S.R. Sutton Microscale imaging of pore structure in hydrothermal sulfide chimneys using synchrotron x-ray computed tomography P. O'Day, J. Muccino, S. Thompson, M.Jew, and J. Holloway

335

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Science EXAFS and XANES of plutonium and uranium edges from titanate ceramics for fissile materials disposition J.A. Fortner, A.J. Kropf, R.J. Finch, M.C. Hash, S.B. Aase,...

336

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrumentation and Techniques Instrumentation and Techniques A bent Laue analyzer detection system for dilute fluorescence XAFS C. Karanfil, Z. Zhong, L.D. Chapman, R. Fischetti, C.U. Segre, B.A. Bunker, and G.B. Bunker A classical Hanbury Brown-Twiss experiment with hard x-rays E. Gluskin, E.E. Alp, I. McNulty, W. Sturhahn, and J. Sutter A fixed-angle double-mirror filter for producing a pink undulator beam at the Advanced Photon Source E. Dufresne, T. Sanchez, T. Nurushev, and S. Dierker A hard x-ray scanning microprobe for fluorescence imaging and microdiffraction at the Advanced Photon Source Z. Cai, B. Lai, P. Ilinski, D. Legnini, J. Maser, W. Yun, and W. Rodrigues A high-energy phase retarder for the simultaneous production of right- and left-handed circularly polarized x-rays C.T. Venkataraman, J.C. Lang, C.S. Nelson, G. Srajer, D.R. Haeffner, and

337

How to Apply | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

How to Apply How to Apply Visiting Faculty Program (VFP) VFP Home Eligibility Benefits Participant Obligations How to Apply Selecting a Host DOE Laboratory Developing a Research Proposal Recommender Information Student Participants Submitting a Proposal to DOE Application Selection Process and Notification Key Dates Frequently Asked Questions Contact WDTS Home How to Apply Print Text Size: A A A RSS Feeds FeedbackShare Page Application Requirements All Applications to the VFP program must be completed through the online application system. The Faculty Application requirements include: 1. Completion of all required fields in the applications, including: Contact and Academic Information Citizenship status Optional Student Participation Research Proposal Essays Student Participation - Optional

338

How to Apply | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

How to Apply How to Apply Science Undergraduate Laboratory Internships (SULI) SULI Home Eligibility Benefits Participant Obligations How to Apply Selecting a Host DOE Laboratory Recommender Information Application Selection Process and Notification Key Dates Frequently Asked Questions Contact WDTS Home How to Apply Print Text Size: A A A RSS Feeds FeedbackShare Page Application Requirements All Applications to the SULI program must be completed through the online application system. The Application requirements include: 1. Completion of all required fields in the applications, including: Contact and Education Information Citizenship Status Laboratory choice and research interests Essays 2. Undergraduate transcripts, submitted online 3. Two letters of Recommendation, submitted online

339

A Study on the Effect of Applied Potentials on Tress Corrosion ...  

Science Conference Proceedings (OSTI)

Morphology of X70 pipeline steel fracture surfaces at different applied potentials were also observed by scanning electron microscope (SEM). The results...

340

Step 3: Apply for Designed to Earn the ENERGY STAR recognition...  

NLE Websites -- All DOE Office Websites (Extended Search)

lifecycle Step 3: Apply for Designed to Earn the ENERGY STAR recognition Relax Your architect or engineer will complete this step. However, you should familiarize yourself with...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Applied Health Technology a New Research Discipline at Blekinge Institute of Technology.  

E-Print Network (OSTI)

??Since spring 2008 is Applied Health Technology a new research discipline at Blekinge Institute of Technology. The discipline has been developed in collaboration between the (more)

Olander, Ewy

2009-01-01T23:59:59.000Z

342

Sodium-Lithium Ratio In Water Applied To Geothermometry Of Geothermal...  

Open Energy Info (EERE)

Sign Up Search Page Edit with form History Facebook icon Twitter icon Sodium-Lithium Ratio In Water Applied To Geothermometry Of Geothermal Reservoirs Jump to: navigation,...

343

Last Name First Name Department Associated Faculty Chang Stephanie UBC/Applied Science/Centre for Human Settlements  

E-Print Network (OSTI)

Engineering Gopaluni Bhushan UBC/Applied Science/Chemical & Biological Engineering Grace John R. UBC/Civil Engineering Fannin R. Jonathan UBC/Applied Science/Civil Engineering Finn William D. UBC/Applied Science/Civil Engineering Froese Thomas M. UBC/Applied Science/Civil Engineering Hall Eric R. UBC/Applied Science

Pulfrey, David L.

344

CX-000953: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

953: Categorical Exclusion Determination 953: Categorical Exclusion Determination CX-000953: Categorical Exclusion Determination Ultra-Compact High-Efficiency Luminaire for General Illumination CX(s) Applied: B3.6 Date: 03/01/2010 Location(s): Goleta, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory To create an ultra-compact 80 lumens per watt (LPW) solid state lighting (SSL) luminaire that emits at a color temperature of 3000 Kelvin with a color rendering index (CRI) of 90. The project will involve synergetic light-emitting diode (LED) component, optics, thermal management and driver development. DOCUMENT(S) AVAILABLE FOR DOWNLOAD CX-000953.pdf More Documents & Publications CX-000777: Categorical Exclusion Determination CX-010461: Categorical Exclusion Determination

345

CX-005924: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

924: Categorical Exclusion Determination 924: Categorical Exclusion Determination CX-005924: Categorical Exclusion Determination Light Emitting Diode Lighting CX(s) Applied: B2.5, B5.1 Date: 05/13/2011 Location(s): Dover, Delaware Office(s): Energy Efficiency and Renewable Energy Replacement of 71 high pressure sodium (HPS) lights, with 71 light emitting diode (LED) lights - LED lights provide savings of up to - 30% on electricity (over HPS). In addition, LED lights will reduce maintenance costs, have a longer service life, provide manageability of illumination levels, and focus light specifically where needed, reducing light pollution. DOCUMENT(S) AVAILABLE FOR DOWNLOAD CX-005924.pdf More Documents & Publications CX-001765: Categorical Exclusion Determination CX-003723: Categorical Exclusion Determination

346

CX-005700: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

700: Categorical Exclusion Determination 700: Categorical Exclusion Determination CX-005700: Categorical Exclusion Determination California-City-Oxnard CX(s) Applied: A1, A9, B1.32, B2.5, B5.1 Date: 04/08/2011 Location(s): Oxnard, California Office(s): Energy Efficiency and Renewable Energy Energy Efficiency and Conservation Block Grant Program. 1) City wide energy audit of city buildings; 2) Installation of intelligent transportation system; 3) Replace illuminated street signs with reflective signs; and 4) Building retrofits to include lighting systems and exit signs, installation of sensors and timers, install heating, ventilation and air conditioning (HVAC) and chiller improvements?buildings include: Public Safety Building, Downtown Parking Structure, City Hall, City Hall Annex, Main Library,

347

CX-004102: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4102: Categorical Exclusion Determination 4102: Categorical Exclusion Determination CX-004102: Categorical Exclusion Determination Raman Laser System Research CX(s) Applied: B3.11 Date: 08/26/2010 Location(s): New Mexico Office(s): Sandia Site Office Sandia National Laboratories/New Mexico (SNL/NM) proposes to operate a Raman Laser System for specialized science and technology research. Targets would be set up at short-range, medium-range, and long-range locations and illuminated with the laser. The laser's light spectrum is invisible and poses no ocular hazard at distances greater than about 160 meters (525 feet). DOCUMENT(S) AVAILABLE FOR DOWNLOAD CX-004102.pdf More Documents & Publications CX-004196: Categorical Exclusion Determination CX-000546: Categorical Exclusion Determination 2013 R&D 100 Award Winners

348

New York | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 24, 2011 May 24, 2011 SEMATECH: A Model for Advancing Solar Technology SEMATECH breaths new life into the semiconductor industry by bringing 14 companies together and helping them share and collaborate in their most expensive and difficult manufacturing development projects. May 23, 2011 Bright Lights From Dark Places The largest three-dimensional map of the universe ever made? Find out how scientists are using black holes to illuminate the distant parts of the universe in detail. May 23, 2011 Secretary Steven Chu's Remarks as Prepared for Delivery at the Polytechnic Institute of New York University May 23, 2011 May 19, 2011 CX-005882: Categorical Exclusion Determination Demolish Cottages Formerly Utilized as Summer Housing Identified as Building 368, Units 1 - 30 CX(s) Applied: B1.23

349

Shielding from instantaneously and adiabatically applied potential wells in collisionless plasmas  

E-Print Network (OSTI)

Shielding from instantaneously and adiabatically applied potential wells in collisionless plasmas A shielding'' . Experiments demonstrate that when a test potential well is applied to a one-dimensional pure of shielding implicitly or explicitly assume such collisions. Yet it is well known that shielding in plasmas

California at Berkeley, University of

350

Effects of applying STR for group learning activities on learning performance in a synchronous cyber classroom  

Science Conference Proceedings (OSTI)

This study aimed to apply Speech to Text Recognition (STR) for individual oral presentations and group discussions of students in a synchronous cyber classroom. An experiment was conducted to analyze the effectiveness of applying STR on learning performance. ... Keywords: Computer-mediated communication, Distance education and telelearning, Improving classroom teaching, Pedagogical issues, cooperative/collaborative learning

Tony C. T. Kuo; Rustam Shadiev; Wu-Yuin Hwang; Nian-Shing Chen

2012-01-01T23:59:59.000Z

351

25th AIAA Applied Aerodynamics Conference 25 -28 June 2007, Miami, FL AIAA 2007-4442  

E-Print Network (OSTI)

25th AIAA Applied Aerodynamics Conference 25 - 28 June 2007, Miami, FL AIAA 2007-4442 Copyright , Diego Saer3 and Ge-Cheng Zha4 University of Miami, Coral Gables, Florida 33124 A flying wing personal and Aerospace Engineering A #12;25th AIAA Applied Aerodynamics Conference 25 - 28 June 2007, Miami, FL AIAA 2007

Zha, Gecheng

352

Special Section Guest Editorial: High-Performance Computing in Applied Remote Sensing  

E-Print Network (OSTI)

Special Section Guest Editorial: High-Performance Computing in Applied Remote Sensing Bormin Huanga-performance computing in applied remote sensing presents the state-of-the-art research in incorporating high-performance computing (HPC) facilities and algorithms for effective and efficient remote sensing applications

Plaza, Antonio J.

353

Applying the Toyota Production System to a Hospital Pharmacy Durward K. Sobek, II  

E-Print Network (OSTI)

Applying the Toyota Production System to a Hospital Pharmacy Durward K. Sobek, II Dept research project to apply the principles of the Toyota Production System to a hospital pharmacy. We. Keywords: Toyota Production System, health care, lean manufacturing 1. Introduction The Toyota Production

Sobek II, Durward K.

354

Applying Learnable Evolution Model to Heat Exchanger Design Kenneth A. Kaufman and Ryszard S. Michalski*  

E-Print Network (OSTI)

Applying Learnable Evolution Model to Heat Exchanger Design Kenneth A. Kaufman and Ryszard S), has been applied to the problem of optimizing tube structures of heat exchangers. In contrast. A system, ISHED1, based on LEM, automatically searches for the highest capacity heat exchangers under given

Michalski, Ryszard S.

355

Applied Reactor Physics TA RG E T AU D I E N C E  

E-Print Network (OSTI)

courses. Most production codes in reactor physics are accompanied with rather complete theory guides devoted to the study of interactions between neutrons and matter in a nuclear reactor. Such an interactionApplied Reactor Physics TA RG E T AU D I E N C E Applied Reactor Physics is designed for an audi

Meunier, Michel

356

South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2011 CX-005496: Categorical Exclusion Determination Energy Frontiers Research Center (EFRC) - Nanoscale Actinide Materials CX(s) Applied: B3.6 Date: 02282011 Location(s):...

357

CX-004371: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Kapstone Kraft Paper Company 3 Paper Machine Steam Efficiency Improvements CX(s) Applied: B5.1 Date: 11022010 Location(s): North...

358

CX-006239: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006239: Categorical Exclusion Determination Structure Replacement, Guernsey Rural Substation to Limestone Substation, Platte County, Wyoming CX(s) Applied: B4.6 Date:...

359

CX-003909: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-003909: Categorical Exclusion Determination Emergency Levee, Bank, and Drainage Repairs CX(s) Applied: B2.5 Date: 09162010 Location(s): Craighead...

360

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-003909: Categorical Exclusion Determination Emergency Levee, Bank, and Drainage Repairs CX(s) Applied: B2.5 Date: 09162010 Location(s): Craighead...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-010709: Categorical Exclusion Determination White Bluffs Bank Building Renovation CX(s) Applied: B3.14 Date: 07222013 Location(s): Washington...

362

CX-010709: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-010709: Categorical Exclusion Determination White Bluffs Bank Building Renovation CX(s) Applied: B3.14 Date: 07222013 Location(s): Washington...

363

CX-001374: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-001374: Categorical Exclusion Determination Timber Mountain Weather Station CX(s) Applied: B3.1 Date: 03182010 Location(s): Timber Mountain, Nevada...

364

North Dakota | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wind Energy Center June 24, 2010 CX-002857: Categorical Exclusion Determination Weather Incorporated Needs Development (W.I.N.D.) CX(s) Applied: A9 Date: 06242010...

365

CX-004401: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-004401: Categorical Exclusion Determination The Use of Scrap Tires for Oil Well Stimulation CX(s) Applied: B3.6 Date: 11082010 Location(s): Waynesburg,...

366

New Mexico | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 18, 2010 CX-004280: Categorical Exclusion Determination Characterizing Stimulation Domains for Improved Well Completions in Gas Shales CX(s) Applied: A9 Date:...

367

Texas | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy October 18, 2010 CX-004282: Categorical Exclusion Determination Characterizing Stimulation Domains for Improved Well Completions in Gas Shales CX(s) Applied: A9 Date:...

368

Utah | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Laboratory May 13, 2011 CX-005814: Categorical Exclusion Determination Characterizing Stimulation Domains for Improved Well Completions in Gas Shales CX(s) Applied: A9 Date:...

369

Oklahoma | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Laboratory October 18, 2010 CX-004281: Categorical Exclusion Determination Characterizing Stimulation Domains for Improved Well Completions in Gas Shales CX(s) Applied: A9 Date:...

370

CX-000768: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Determining the Variability of Continuous Mercury Monitors at Low Mercury Levels CX(s) Applied: B3.6 Date: 02072010 Location(s):...

371

CX-001459: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Air Quality VIII: An International Conference on Carbon Management, Mercury, Trace Elements, Sulfur Oxide (SOx), Nitrogen Oxide (NOx) CX(s) Applied: A9 Date: 03...

372

CX-007464: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-007464: Categorical Exclusion Determination State Energy Program - State Energy Efficient Appliance Rebate Program CX(s) Applied: A1, B5.1...

373

CX-004185: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: B3.6 Date: 09272010...

374

CX-006878: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-006878: Categorical Exclusion Determination Integrated Gasification Combined Cycle Affordability and Availability CX(s) Applied: A9 Date: 09302011...

375

CX-006877: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-006877: Categorical Exclusion Determination Integrated Gasification Combined Cycle Affordability and Availability CX(s) Applied: A9 Date: 09302011...

376

CX-004172: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: B3.6 Date: 09282010...

377

CX-004184: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: B3.6 Date: 09272010...

378

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-000380: Categorical Exclusion Determination Sweeney Integrated Gasification Combined Cycle (IGCC)Carbon Capture and Sequestration Project - IGCC Plant CX(s) Applied:...

379

CX-006178: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-006178: Categorical Exclusion Determination Pittsburgh Catalyst and Materials Characterization Lab CX(s) Applied: B3.6 Date: 07112011 Location(s):...

380

CX-002443: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-002443: Categorical Exclusion Determination Passive Nitrogen Oxide Removal Catalyst Research CX(s) Applied: B3.6 Date: 05262010 Location(s): West Lafayette, Indiana...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

CX-008265: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-008265: Categorical Exclusion Determination Sorbent, Catalyst, Photochemical - Analytical Methods Development Laboratory CX(s) Applied: B3.6 Date:...

382

CX-009116: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6: Categorical Exclusion Determination CX-009116: Categorical Exclusion Determination Catalyst Characterization CX(s) Applied: B3.6 Date: 08142012 Location(s): South Carolina...

383

CX-002442: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-002442: Categorical Exclusion Determination Passive Nitrogen Oxide Removal Catalyst Research CX(s) Applied: A9 Date: 05262010 Location(s): Notre Dame, Indiana...

384

CX-005209: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9: Categorical Exclusion Determination CX-005209: Categorical Exclusion Determination Utah County Energy Efficiency Retrofits CX(s) Applied: A9, A11, B5.1 Date: 02162011...

385

Utah | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Assurance Planning (LEAP) CX(s) Applied: A9 Date: 04122010 Location(s): Herber, Utah Office(s): Electricity Delivery and Energy Reliability, National Energy Technology...

386

Utah | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reduction Technologies Program CX(s) Applied: A1 Date: 09282011 Location(s): Utah Office(s): Energy Efficiency and Renewable Energy, Savannah River Operations Office...

387

CX-010303: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Categorical Exclusion Determination CX-010303: Categorical Exclusion Determination Utah Expansion of Alternative Fueling Infrastructure CX(s) Applied: B5.22 Date: 04302013...

388

CX-004430: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0: Categorical Exclusion Determination CX-004430: Categorical Exclusion Determination Pennsylvania Green Energy Works Targeted Grant - Edinboro Solar Array CX(s) Applied: B5.1...

389

Missouri | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21, 2011 CX-007385: Categorical Exclusion Determination Development of Molten-Salt Heat Transfer Fluid Technology for Parabolic Trough Solar Power Plants CX(s) Applied: A9...

390

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Cost Effective Point Concentrator Dish for CSP Applications CX(s) Applied: B3.6 Date: 07132011 Location(s): Bethlehem, Pennsylvania...

391

CX-006036: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-006036: Categorical Exclusion Determination Big Sky Regional Carbon Sequestration Partnership - Phase III CX(s) Applied: A1, A9, A11 Date: 06132011...

392

CX-004777: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-004777: Categorical Exclusion Determination Recovery Act: Innovative Carbon Dioxide Sequestration from Flue Gas using an In-Duct Scrubber CX(s) Applied: A9,...

393

CX-008506: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-008506: Categorical Exclusion Determination Midwest Regional Carbon Sequestration Partnership - Phase Three CX(s) Applied: B3.1, B5.3 Date: 07162012...

394

CX-008945: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-008945: Categorical Exclusion Determination Simplified Predictive Models for Carbon Dioxide Sequestration Performance Assessment CX(s) Applied: A9 Date: 08152012...

395

CX-008476: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-008476: Categorical Exclusion Determination Small Scale Field Test Demonstrating Carbon Dioxide Sequestration in the Arbuckle Saline Aquifer CX(s) Applied: A9, B1.15,...

396

CX-007045: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-007045: Categorical Exclusion Determination Small-Scale Field Test Demonstrating Carbon Dioxide Sequestration in Arbuckle Saline Aquifer CX(s) Applied: A1, A9 Date: 0920...

397

CX-004776: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-004776: Categorical Exclusion Determination Recovery Act: Innovative Carbon Dioxide Sequestration from Flue Gas using an In-Duct Scrubber CX(s) Applied: A9,...

398

CX-004778: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-004778: Categorical Exclusion Determination Recovery Act: Innovative Carbon Dioxide Sequestration from Flue Gas using an In-Duct Scrubber CX(s) Applied: A9,...

399

CX-009347: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-009347: Categorical Exclusion Determination Optimal Model Complexity in Geological Carbon Sequestration CX(s) Applied: A9 Date: 09212012 Location(s): Wyoming Offices(s):...

400

CX-000394: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

94: Categorical Exclusion Determination CX-000394: Categorical Exclusion Determination Carbon Capture and Sequestration (by Enhance Oil Recovery) Project Phase 1 CX(s) Applied: A1,...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

CX-008507: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-008507: Categorical Exclusion Determination Midwest Regional Carbon Sequestration Partnership - Phase Three CX(s) Applied: B3.1, B5.3 Date: 07162012...

402

CX-000285: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

285: Categorical Exclusion Determination CX-000285: Categorical Exclusion Determination Carbon Capture and Sequestration (by Enhanced Oil Recovery) Project Phase 1 CX(s) Applied:...

403

CX-007118: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-007118: Categorical Exclusion Determination Shallow Carbon Sequestration Demonstration Project CX(s) Applied: B3.1 Date: 10042011...

404

CX-003173: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-003173: Categorical Exclusion Determination Midwest Region Carbon Sequestration Partnership, Phase III Test Well CX(s) Applied: B3.1 Date: 07282010...

405

CX-000393: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Categorical Exclusion Determination CX-000393: Categorical Exclusion Determination Carbon Capture and Sequestration (by Enhanced Oil Recovery) Project Phase 1 CX(s) Applied: A1,...

406

CX-009326: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-009326: Categorical Exclusion Determination Midwest Regional Carbon Sequestration Partnership - Subtask 1.7 CX(s) Applied: B3.1 Date: 09282012...

407

CX-007111: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-007111: Categorical Exclusion Determination Shallow Carbon Sequestration Demonstration Project (Iatan Generating Station) CX(s) Applied: B3.1...

408

CX-007833: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Energy Retrofits CX(s) Applied: B5.1 Date: 11/29/2011 Location(s): Colorado Offices(s): Energy Efficiency and Renewable Energy

409

CX-005116: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-005116: Categorical Exclusion Determination Lusk Substation Transformer Replacement, Lusk, Niobrara County, Wyoming CX(s) Applied: B4.6 Date: 01242011...

410

CX-008826: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Remanufacture, Transport, and Install BHTX-29 Transformer CX(s) Applied: B1.3 Date: 07172012 Location(s): Texas Offices(s): Strategic...

411

CX-009198: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-009198: Categorical Exclusion Determination Ross Transformer Oil Terminal Upgrade CX(s) Applied: B4.6 Date: 09242012 Location(s): Washington...

412

CX-003062: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Recovery Act-Fault Current Limiting Superconducting Transformer CX(s) Applied: A11, B3.6 Date: 07162010 Location(s): Schenectady, New York...

413

CX-010741: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-010741: Categorical Exclusion Determination Smart Market Advance Retrofit Transformer Program (SMART Scale) CX(s) Applied: A9, B5.1 Date: 08092013 Location(s):...

414

CX-000554: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-000554: Categorical Exclusion Determination Ogallala Substation KY1A Transformer Replacement CX(s) Applied: B4.6 Date: 11162009 Location(s): Ogallala, Nebraska...

415

CX-010408: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-010408: Categorical Exclusion Determination Emergency Current Transformer Replacement at Gila Substation CX(s) Applied: B4.6 Date: 04262013 Location(s):...

416

CX-007153: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-007153: Categorical Exclusion Determination Glen Canyon substation Transformer Addition CX(s) Applied: B4.6 Date: 05052011 Location(s): Coconino County, Arizona...

417

CX-007807: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-007807: Categorical Exclusion Determination Griffith Substation Transformer Addition CX(s) Applied: B4.6 Date: 11142011 Location(s): Nevada Offices(s):...

418

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

results. Download CX-005114: Categorical Exclusion Determination Fleming Substation Transformer Replacement, Fleming, Logan County, Colorado CX(s) Applied: B4.6 Date: 12202010...

419

CX-005114: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-005114: Categorical Exclusion Determination Fleming Substation Transformer Replacement, Fleming, Logan County, Colorado CX(s) Applied: B4.6 Date: 12202010...

420

CX-009224: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-009224: Categorical Exclusion Determination Project L-718, Electrical Utilities Transformer Management Support Facility CX(s) Applied: B1.15 Date: 09042012 Location(s):...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Colorado | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 20, 2010 CX-005114: Categorical Exclusion Determination Fleming Substation Transformer Replacement, Fleming, Logan County, Colorado CX(s) Applied: B4.6 Date: 12202010...

422

CX-007399: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-007399: Categorical Exclusion Determination Offshore Wind Removing Market Barriers CX(s) Applied: A9, A11 Date: 12202011 Location(s): Massachusetts...

423

CX-006672: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-006672: Categorical Exclusion Determination Replace Electrical Line From Well to Power Pole CX(s) Applied: B1.3 Date: 03112010 Location(s):...

424

CX-008374: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-008374: Categorical Exclusion Determination Install Groundwater Monitoring Wells CX(s) Applied: B3.1 Date: 03222012 Location(s): South Carolina Offices(s): Savannah...

425

CX-006540: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0: Categorical Exclusion Determination CX-006540: Categorical Exclusion Determination Wells Fargo Property Structure Removal CX(s) Applied: B1.23 Date: 08162011 Location(s):...

426

CX-005671: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-005671: Categorical Exclusion Determination Lafarge Groundwater Monitoring Wells (NREL 11-023) CX(s) Applied: B3.1 Date: 04202011 Location(s): Jefferson County,...

427

CX-002829: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-002829: Categorical Exclusion Determination West Hackberry Brine Disposal Wells Control Systems Upgrade CX(s) Applied: B1.7 Date: 06212010 Location(s): West...

428

CX-010109: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Curecanti-Poncha 230 Kilovolt Transmission Line Cross Bar Ranch Project CX(s) Applied: B1.3 Date: 04252013 Location(s): Colorado...

429

CX-009234: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Hesperus- Montrose 345 Kilovolt Transmission Line Private Lands Herbicide Treatment for Vegetation Management CX(s) Applied: B1.3 Date:...

430

CX-005620: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-005620: Categorical Exclusion Determination Synchrophasor Based Tracking Three Phase State Estimator and Applicator CX(s) Applied: B3.6 Date: 04132011...

431

CX-003724: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Sustainable Landscapes Project (Pennsylvania), Congressionally Directed Project Tracking Number 194.10 CX(s) Applied: B5.1 Date: 09202010 Location(s): Pittsburgh,...

432

CX-005615: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-005615: Categorical Exclusion Determination Synchrophasor Based Tracking Three Phase State Estimator and Applicator CX(s) Applied: B3.6 Date: 04132011...

433

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006495: Categorical Exclusion Determination Clean Energy Development Fund-Renewable Energy Program - Scott Farm Photovoltaic System CX(s) Applied: B5.1 Date: 09062011...

434

CX-006495: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006495: Categorical Exclusion Determination Clean Energy Development Fund-Renewable Energy Program - Scott Farm Photovoltaic System CX(s) Applied: B5.1 Date: 09062011...

435

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

orical-exclusion-determination Download CX-008282: Categorical Exclusion Determination Biogas Reconditioning Project CX(s) Applied: B5.1 Date: 05012012 Location(s): Nevada...

436

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-002138: Categorical Exclusion Determination Waste Digester Biogas Recovery System CX(s) Applied: B5.1 Date: 04292010 Location(s): Plover, Wisconsin...

437

Categorical Exclusion Determinations: B5.1 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-004467: Categorical Exclusion Determination Forest County Potawatomi Community - Biogas Digester - Milwaukee County CX(s) Applied: B5.1 Date: 11102010 Location(s):...

438

Pennsylvania | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Pennsylvania Green Energy Works Targeted Grant - Biogas- Derry Township Municipal Authority CX(s) Applied: B1.15, B5.1 Date: 02162010...

439

CX-007001: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: Categorical Exclusion Determination CX-007001: Categorical Exclusion Determination Cyber Engineering Research Institute (CERI) New Leased Building CX(s) Applied: B1.24 Date: 06...

440

CX-010184: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX(s) Applied: A9 Date: 04232013 Location(s): North Dakota Offices(s): National Energy Technology Laboratory Activities under this subtask involve literature review,...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Categorical Exclusion (CX) Determinations By Date | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2010 CX-001501: Categorical Exclusion Determination Commercial Renewable Energy Systems - FLS Meadowood Garden Solar CX(s) Applied: B5.1 Date: 04012010 Location(s):...

442

CX-010266: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-010266: Categorical Exclusion Determination South Table Mountain Energy Systems Integration Facility Hydrogen Fueling Station CX(s) Applied: B1.15 Date: 05082013...

443

CX-001448: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-001448: Categorical Exclusion Determination Systems Level Technology Development, Integration and Demonstration for Efficient Class 8 Trucks CX(s) Applied: B5.1 Date: 04012010...

444

CX-002349: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-002349: Categorical Exclusion Determination Operations Systems Development and Integration CX(s) Applied: B1.7 Date: 05102010 Location(s):...

445

Categorical Exclusion Determinations: American Recovery and Reinvestme...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office March 2, 2010 CX-001015: Categorical Exclusion Determination Integrated Direct Current (dc)-dc Conversion for Energy-Efficiency Multicore Microprocessors CX(s) Applied: A9,...

446

CX-010590: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Kalispell Shunt Cap Addition Project CX(s) Applied: B4.11 Date: 07/01/2013 Location(s): Montana Offices(s): Bonneville Power Administration

447

CX-001034: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Recovery Act: Solar Reforming of Carbon Dioxide to Produce Diesel Fuel CX(s) Applied: B3.6 Date: 03022010 Location(s): Sacramento, California...

448

CX-008569: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-008569: Categorical Exclusion Determination Program Year 2012 Oregon State Energy Program Formula Grant CX(s) Applied: A9, A11 Date: 0626...

449

CX-008549: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-008549: Categorical Exclusion Determination Program Year 2012 State Energy Program Formula Grants CX(s) Applied: A9, A11 Date: 06252012...

450

CX-009913: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-009913: Categorical Exclusion Determination Program year 2012 State Energy Program Formula Grants CX(s) Applied: A9, B5.1 Date: 01292013...

451

CX-006150: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Recovery State Energy Program - Renewable Energy Incentives - Martin Residence Closed Loop Heat Pump System CX(s) Applied: B5.1 Date: 07132011...

452

CX-005690: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-005690: Categorical Exclusion Determination Clinton Community Human Service Campus Project CX(s) Applied: B5.1 Date: 04112011 Location(s): Clinton, Iowa...

453

CX-009179: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-009179: Categorical Exclusion Determination (0675-1511) Ford Motor Company - High Precision Tester for Automotive and Stationary Batteries CX(s) Applied:...

454

CX-000978: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Western Virginia Water Authority's Roanoke Regional Wastewater Treatment Plant Biogas Combined Heat and Power CX(s) Applied: B5.1 Date: 02192010 Location(s): Roanoke...

455

Categorical Exclusion Determinations: National Energy Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Pennsylvania Green Energy Works Targeted Grant - Biogas - Anergy Dairy Farm Biodigesters CX(s) Applied: B1.15, B5.1 Date: 02162010...

456

CX-001941: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Renewable Energy Enterprise Zones (REEZ) Amalgamated Sugar Biogas Feasibility Study (Nampa 1) CX(s) Applied: A9, A11 Date: 02102010 Location(s):...

457

CX-000986: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Pennsylvania Green Energy Works Targeted Grant - Biogas- Derry Township Municipal Authority CX(s) Applied: B1.15, B5.1 Date: 02162010...

458

Categorical Exclusion Determinations: Office of Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Energy Efficiency and Conservation Block Grant Activity 1: Digester Biogas CX(s) Applied: B5.1 Date: 03222011 Location(s): Palm Beach County, Florida...

459

CX-000985: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Pennsylvania Green Energy Works Targeted Grant - Biogas - Anergy Dairy Farm Biodigesters CX(s) Applied: B1.15, B5.1 Date: 02162010...

460

Missouri | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mercury January 26, 2011 CX-005413: Categorical Exclusion Determination Missouri Biogas 1 -Hampton Feedlot CX(s) Applied: B5.1 Date: 01262011 Location(s): Triplett,...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

CX-001922: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

22: Categorical Exclusion Determination CX-001922: Categorical Exclusion Determination Biogas to Regenerative Thermal Oxidizer CX(s) Applied: B2.5, B5.1 Date: 03312010...

462

CX-008438: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Categorical Exclusion Determination CX-008438: Categorical Exclusion Determination Biogas Reconditioning Project CX(s) Applied: B5.1 Date: 06272012 Location(s): Nevada...

463

Pennsylvania | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Pennsylvania Green Energy Works Targeted Grant - Biogas - Anergy Dairy Farm Biodigesters CX(s) Applied: B1.15, B5.1 Date: 02162010...

464

CX-000984: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Pennsylvania Green Energy Works Targeted Grant - Biogas - Hermitage Municipal Authority CX(s) Applied: B1.15, B5.1 Date: 02172010...

465

CX-008282: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Categorical Exclusion Determination CX-008282: Categorical Exclusion Determination Biogas Reconditioning Project CX(s) Applied: B5.1 Date: 05012012 Location(s): Nevada...

466

Virginia | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Western Virginia Water Authority's Roanoke Regional Wastewater Treatment Plant Biogas Combined Heat and Power CX(s) Applied: B5.1 Date: 02192010 Location(s): Roanoke...

467

Wisconsin | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-004467: Categorical Exclusion Determination Forest County Potawatomi Community - Biogas Digester - Milwaukee County CX(s) Applied: B5.1 Date: 11102010 Location(s):...

468

CX-002029: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

29: Categorical Exclusion Determination CX-002029: Categorical Exclusion Determination Engine Generator for Enumclaw Dairy Manure Digester CX(s) Applied: B5.1 Date: 04222010...

469

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ical-exclusion-determination Download CX-007927: Categorical Exclusion Determination Compressor Testing of Next Generation Refrigeration Lubricants CX(s) Applied: B3.6 Date: 0222...

470

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-008279: Categorical Exclusion Determination Building 8 Compressor Aftercooler Rupture Disc Overflow Piping Project CX(s) Applied: B1.3, B1.15 Date:...

471

CX-005320: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-005320: Categorical Exclusion Determination 700100 Pounds Per Square Inch Compressor Additional Filtration Project CX(s) Applied: B2.5 Date: 02242011 Location(s):...

472

CX-008365: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Groundwater Monitoring Well Abandonment and Installation at the Mixed Waste Management Facility CX(s) Applied: B3.1 Date: 04092012 Location(s): South...

473

CX-008660: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Groundwater Monitoring Well Installation at Mixed Waste Management Facility CX(s) Applied: B3.1 Date: 05162012 Location(s): South...

474

CX-004734: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-004734: Categorical Exclusion Determination Low-Level Mixed Waste Shipments in Fiscal Year 2011 CX(s) Applied: B1.30 Date: 11032010...

475

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-001637: Categorical Exclusion Determination CRED - City of Montpelier District Energy Project CX(s) Applied: A9 Date: 04072010 Location(s): Montpelier,...

476

CX-001637: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-001637: Categorical Exclusion Determination CRED - City of Montpelier District Energy Project CX(s) Applied: A9 Date: 04072010 Location(s): Montpelier,...

477

CX-008546: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

National Open-ocean Energy Laboratory CX(s) Applied: A9 Date: 06/20/2012 Location(s): Florida Offices(s): Golden Field Office

478

Categorical Exclusion Determinations: American Recovery and Reinvestme...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Premium Power Distributed Energy Storage System Demonstration for National Grid and Sacramento Municipal Utility District CX(s) Applied: A1, A9 Date: 06182010 Location(s):...

479

Massachusetts | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Premium Power Distributed Energy Storage System Demonstration for National Grid and Sacramento Municipal Utility District CX(s) Applied: A1, A9 Date: 06182010 Location(s):...

480

CX-007603: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-007603: Categorical Exclusion Determination Ultra-Deepwater Resources to Reserves Development and Acceleration through Appraisal CX(s) Applied: A9 Date: 01202012...

Note: This page contains sample records for the topic "illumination cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

CX-000749: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-000749: Categorical Exclusion Determination Ultra-Deepwater Resources to Reserves Development and Acceleration Through Appraisal CX(s) Applied: A9 Date: 01292010...

482

New Hampshire | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Demonstration of Isothermal Compressed Air Energy Storage to Support Renewable Energy Production CX(s) Applied: B3.6 Date: 02092010 Location(s): West Lebanon, New...

483

Categorical Exclusion Determinations: Office of Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Commercial Renewable Energy Systems - Frontier Spinning Mills Solar CX(s) Applied: B5.1 Date: 04012010 Location(s): Sanford, North Carolina...

484

CX-005591: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Computational Modeling and Assessment of Nanocoatings for Ultra Supercritical Boilers CX(s) Applied: A9, B3.6 Date: 04112011 Location(s): Livingston, New Jersey...

485

CX-005592: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Computational Modeling and Assessment of Nanocoatings for Ultra Supercritical Boilers CX(s) Applied: A1, A9 Date: 04112011 Location(s): Charlotte, North Carolina...

486

CX-002734: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-002734: Categorical Exclusion Determination Wood-Fired Boilers for Department of Transportation Sheds CX(s) Applied: A9, B5.1 Date: 06182010...

487

North Dakota | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Updating the Improved Guidelines for Solving Ash Deposition Problems in Utility Boilers Report CX(s) Applied: A9 Date: 08112010 Location(s): Grand Forks, North Dakota...

488

CX-003393: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Updating the Improved Guidelines for Solving Ash Deposition Problems in Utility Boilers Report CX(s) Applied: A9 Date: 08112010 Location(s): Grand Forks, North Dakota...

489

CX-002333: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Smart Grid Regional Demonstration - Technology Solutions for Wind Integration - Phase I CX(s) Applied: A9 Date: 05112010 Location(s): Austin, Texas...

490

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-007402: Categorical Exclusion Determination Carolinas Offshore Wind Integration Case Study CX(s) Applied: A9 Date: 12082011 Location(s): North...

491

CX-002737: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-002737: Categorical Exclusion Determination State-Sponsored Renewable Energy and Energy Efficiency Projects - William Paterson University CX(s) Applied:...

492

CX-007027: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Pennsylvania 85% Ethanol Corridor Project - Lehigh Gas, Concordville Exxon Station (Baltimore Pike) CX(s) Applied: B5.1 Date: 09222011 Location(s): Glen Mills,...

493

Pennsylvania | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Pennsylvania 85% Ethanol Corridor Project - Lehigh Gas, Concordville Exxon Station (Baltimore Pike) CX(s) Applied: B5.1 Date: 09222011 Location(s): Glen Mills,...

494

CX-007407: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-007407: Categorical Exclusion Determination Advanced Floating Turbine CX(s) Applied: A9 Date: 12072011 Location(s): Ohio Offices(s): Golden Field Office...

495

CX-003230: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-003230: Categorical Exclusion Determination Wind Turbine Gearbox Remanufacturing CX(s) Applied: B2.2, B5.1 Date: 08042010 Location(s):...

496

CX-002194: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-002194: Categorical Exclusion Determination Install Demonstration Wind Turbine at Weldon Spring, Missouri, Site CX(s) Applied: B5.1 Date: 04282010 Location(s):...

497

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-008328: Categorical Exclusion Determination Offsite Oxycombustion Flame Analysis (OOFA) CX(s) Applied: B3.6 Date: 04062012 Location(s): Oregon Offices(s):...

498

CX-010028: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Categorical Exclusion Determination CX-010028: Categorical Exclusion Determination Flame Forming Proppants CX(s) Applied: B3.6 Date: 01172013 Location(s): South Carolina...

499

CX-006523: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006523: Categorical Exclusion Determination Fuel Properties to Enable Lifted-Flame Combustion CX(s) Applied: B3.6 Date: 08232011 Location(s): Livermore, California...

500

CX-000458: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-000458: Categorical Exclusion Determination Investigation on Flame Characteristics and Burner Operability Issues of Oxy-Fuel Combustion CX(s) Applied:...