Powered by Deep Web Technologies
Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Illuminating Engineering Society  

Science Journals Connector (OSTI)

... essay competitions for pupils in schools near Birmingham, and the giving of a series of Christmas lectures on "The Wonders of ... lectures on "The Wonders of Lighting" to more than a thousand children in Bradford. The Society has been instrumental in ...

1944-05-27T23:59:59.000Z

2

The Illuminating Engineering Society and TM-24-13  

Broader source: Energy.gov [DOE]

In 2013, the Illuminating Engineering Society published TM-24-13, An Optional Method for Adjusting the Recommended Illuminance for Visually Demanding Tasks Within IES Illuminance Categories P through Y Based on Light Source Spectrum. This technical memorandum allows the use of spectrum in determining illuminance recommendations for visually demanding tasks, generally in the realm of commercial and industrial interior lighting. Such tasks require the ability to discern detail for efficient performance and include most reading tasks, as well as other critical vision tasks typically found in office, inspection, repair, manufacturing, education, and medical settings.

3

U.S. Department of Energy and Illuminating Engineering Society of North America Partner to Advance Industry Lighting Standards  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) and the Illuminating Engineering Society of North America (IES) signed a Memorandum of Understanding (MOU) to work together on the development of strong industry lighting standards. The original MOU was signed in July 2006 and a renewed MOU was signed in October 2011. It underscores the Department's commitment to support the development of needed metrics and standards for solid-state lighting (SSL) technology.

4

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 119th Convention 2005 October 7­10 New for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. A Web Search Engine for Sound Effects Stephen V. Rice1 and Stephen M. Bailey2

Rice, Stephen V.

5

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 120th Convention 2006 May 20­23 Paris. Additional papers may be obtained by sending request and remittance to Audio Engineering Society, 60 East 42 of the Audio Engineering Society. Parametric Representation of Multichannel Audio Based on Principal Component

Paris-Sud XI, Université de

6

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 114th Convention 2003 March 22 for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. Real Time Object Based Coding Paul M. Brossier1 , Mark B. Sandler1 and Mark D

Plumbley, Mark

7

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 112th Convention 2002 May 10­13 Munich. Additional papers may be obtained by sending request and remittance to Audio Engineering Society, 60 East 42 of the Audio Engineering Society. Intelligent Audio Source Separation using Independent Component Analysis

Mitianoudis, Nikolaos

8

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 135th Convention 2013 October 17­20 New for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. Sound identification from MPEG-encoded audio files Joseph G. Studniarz

Maher, Robert C.

9

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 117th Convention 2004 October 28­31 San for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. AES Technical Committee on Signal Processing Educational CD Project Robert C

Maher, Robert C.

10

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 134th Convention 2013 May 4­7 Rome. Additional papers may be obtained by sending request and remittance to Audio Engineering Society, 60 East 42 of the Audio Engineering Society. On the Informed Source Separation Approach for Interactive Remixing in Stereo

Paris-Sud XI, Université de

11

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 120th Convention 2006 May 20­23 Paris. Additional papers may be obtained by sending request and remittance to Audio Engineering Society, 60 East 42 of the Audio Engineering Society. Acoustic Rendering for Color Information Ludovico Ausiello1 , Emanuele

Ferri, Massimo

12

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

_________________________________ Audio Engineering Society Convention Paper Presented at the 114th and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New York 10165-2520, USA; also see without direct permission from the Journal of the Audio Engineering Society

Monteiro, Edmundo

13

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 119th Convention 2005 October 7­10 New for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. Frequency-Based Coloring of the Waveform Display to Facilitate Audio Editing

Rice, Stephen V.

14

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

___________________________________ Audio Engineering Society Convention Paper Presented at the 111 and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New York 10165-2520, USA; also see without direct permission from the Journal of the Audio Engineering Society

Reiss, Josh

15

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 116th Convention 2004 May 8­11 Berlin. Additional papers may be obtained by sending request and remittance to Audio Engineering Society, 60 East 42 of the Audio Engineering Society. MPEG-4 Audio Lossless Coding Tilman Liebchen1 , Yuriy Reznik2 , Takehiro

Wichmann, Felix

16

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 119th Convention 2005 October 7­10 New for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. The MPEG-4 Audio Lossless Coding (ALS) Standard - Technology and Applications

Wichmann, Felix

17

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 118th Convention 2005 May 28 for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. Improved Forward-Adaptive Prediction for MPEG-4 Audio Lossless Coding Tilman

Wichmann, Felix

18

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 115th Convention 2003 October 10­13 New for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. MPEG-4 Lossless Coding for High-Definition Audio Tilman Liebchen1 1 Technical

Wichmann, Felix

19

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 122nd Convention 2007 May 5­8 Vienna be obtained by sending request and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering

Plumbley, Mark

20

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 127th Convention 2009 October 9­12 New be obtained by sending request and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering

Joseph Fourier Grenoble-I, Université

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 128th Convention 2010 May 22­25 London be obtained by sending request and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering

Paris-Sud XI, Université de

22

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 125th Convention 2008 October 2­5 San be obtained by sending request and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering

Jackson, Philip JB

23

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 129th Convention 2010 November 4­7 San be obtained by sending request and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering

Paris-Sud XI, Université de

24

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 124th Convention 2008 May 17 be obtained by sending request and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering

Reiss, Josh

25

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper Presented at the 130th Convention 2011 May 13­16 London be obtained by sending request and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering

Reiss, Josh

26

Audio Engineering Society Convention Paper 5484  

E-Print Network [OSTI]

___________________________________ Audio Engineering Society Convention Paper 5484 Presented and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New York 10165-2520, USA; also see without direct permission from the Journal of the Audio Engineering Society

Paris-Sud XI, Université de

27

Audio Engineering Society Convention Paper 8648  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper 8648 Presented at the 132nd Convention 2012 April 26 for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. Time domain performance of decimation filter architectures for high

Reiss, Josh

28

Audio Engineering Society Convention Paper 9012  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper 9012 Presented at the 135th Convention 2013 October 17 for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. Evaluating iBall - An intuitive interface and assistive audio mixing

Reiss, Josh

29

Audio Engineering Society Convention Paper 8892  

E-Print Network [OSTI]

Audio Engineering Society Convention Paper 8892 Presented at the 134th Convention 2013 May 4­7 Rome. Additional papers may be obtained by sending request and remittance to Audio Engineering Society, 60 East 42 of the Audio Engineering Society. Implementation of an intelligent equalization tool using Yule

Reiss, Josh

30

Society of Latino Engineers and Society of Professional Journalists  

E-Print Network [OSTI]

Studies Union Golden Gate Chapter of Society of Plastic Engineers Graduate Business Students Association Spartan M.D. Spartan Magazine Club Spartan Racing Electric Spartan Superway Steel Bridge Team Student

Su, Xiao

31

The Engineers Commitment to Society  

Science Journals Connector (OSTI)

Finally, the engineering codes of ethics have little to say about questions regarding the environment. No code spells out what responsibility, if any, engineers have to nonhuman animals, plants, or places. The on...

2010-01-01T23:59:59.000Z

32

Professional Societies: Nuclear Engineering Division (Argonne)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About the Division > Professional About the Division > Professional Societies Director's Welcome Organization Achievements Awards Patents Professional Societies Highlights Fact Sheets, Brochures & Other Documents Multimedia Library About Nuclear Energy Nuclear Reactors Designed by Argonne Argonne's Nuclear Science and Technology Legacy Opportunities within NE Division Visit Argonne Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Celebrating the 70th Anniversary of Chicago Pile 1 (CP-1) Argonne OutLoud on Nuclear Energy Argonne Energy Showcase 2012 Professional Societies Bookmark and Share Employees of the Nuclear Engineering Division are actively involved in many Professional Societies. Some of these are listed below. In addition, some NE employees have received the distinction of being named

33

American Society of Mechanical Engineers/Savannah River National...  

Broader source: Energy.gov (indexed) [DOE]

for Hydrogen Infrastructure Codes and Standards Workshop and the DOE Hydrogen Pipeline Working Group Workshop Agenda American Society of Mechanical EngineersSavannah River...

34

American Society of Mechanical Engineers/Savannah River National...  

Broader source: Energy.gov (indexed) [DOE]

for Hydrogen Infrastructure Codes and Standards Workshop and the DOE Hydrogen Pipeline Working Group Meeting Attendee List American Society of Mechanical EngineersSavannah...

35

American Society of Mechanical Engineers/Savannah River National...  

Broader source: Energy.gov (indexed) [DOE]

American Society of Mechanical EngineersSavannah River National Laboratory (ASMESRNL) Materials and Components for Hydrogen Infrastructure Codes and Standards Workshop and the...

36

Session 3280 Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition  

E-Print Network [OSTI]

Session 3280 Proceedings of the 2001 American Society for Engineering Education Annual Conference in physics. #12;Session 3280 Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition Copyright © 2001, American Society for Engineering Education Science classes

Larkin, Teresa L.

37

Audio Engineering Society Convention e-Brief 151  

E-Print Network [OSTI]

Audio Engineering Society Convention e-Brief 151 Presented at the 136th Convention 2014 April 26. Reproduction of this paper, or any portion thereof, is not permitted without direct permission from the Audio Engineering Society. APE: Audio Perceptual Evaluation toolbox for MATLAB Brecht De Man, Joshua D. Reiss Centre

Reiss, Josh

38

Session 2480 Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition  

E-Print Network [OSTI]

Session 2480 Proceedings of the 2002 American Society for Engineering Education Annual Conference Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition Copyright

Larkin, Teresa L.

39

Session 2793 Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition  

E-Print Network [OSTI]

Session 2793 Proceedings of the 2001 American Society for Engineering Education Annual Conference Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition Copyright

Larkin, Teresa L.

40

Proceedings of the 2005 American Society for Engineering Education Annual Conference & Exposition Copyright 2005, American Society for Engineering Education  

E-Print Network [OSTI]

Proceedings of the 2005 American Society for Engineering Education Annual Conference & Exposition the temperature range 300 ­ 1500 K. The libraries include fuel matrix, cladding, #12;Proceedings of the 2005 American Society for Engineering Education Annual Conference & Exposition Copyright © 2005, American

Deinert, Mark

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

American Indian Science and Engineering Society National Conference |  

Broader source: Energy.gov (indexed) [DOE]

American Indian Science and Engineering Society National Conference American Indian Science and Engineering Society National Conference American Indian Science and Engineering Society National Conference October 30, 2013 8:00AM MDT to November 2, 2013 6:00PM MDT Denver, Colorado The American Inidan Science and Engineering Society (AISES) National Conference is a one-of-a-kind, three day event convening graduate, undergraduate, and high school junior and senior students, teachers, workforce professionals, corporate and government partners, and all members of the "AISES family". The AISES National conference has become the premier event for Native American Science, Engineering, and Math (STEM) professionals and students attracting over 1,600 attendees form across the country. The conference will be held at the Colorado Convention Center.

42

Society of Automotive Engineers World Congress | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Society of Automotive Engineers World Congress Society of Automotive Engineers World Congress Society of Automotive Engineers World Congress April 6, 2006 - 10:12am Addthis Remarks Prepared for Energy Secretary Samuel Bodman Thank you, Greg. It's always a pleasure to be in a room full of engineers. As an engineer myself, I know there is nothing our profession likes better than plain talk and solving problems. So, I'm going to serve you up some plain talk and then some assignments. Our nation faces big challenges in the energy and transportation arena. The President put it plainly in the State of the Union message when he said America is addicted to oil. To start us on the path to recovery from this addiction, he set out the Advanced Energy Initiative which calls for increasing spending on clean energy programs by 22% in next year's budget.

43

Society of Petroleum Engineers Oil Deposits in Diatomites: A New Challenge for Subterranean Mechanics  

E-Print Network [OSTI]

Society of Petroleum Engineers SPE 75230 Oil Deposits in Diatomites: A New Challenge and D. B. Silin4 Copyright 2002, Society of Petroleum Engineers, Inc. This paper was prepared not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author

Patzek, Tadeusz W.

44

Society of Petroleum Engineers Three-Phase Hydraulic Conductances in Angular Capillaries  

E-Print Network [OSTI]

Society of Petroleum Engineers SPE 75193 Three-Phase Hydraulic Conductances in Angular Capillaries Ahmed Al-Futaisi1 , SPE, and Tad W. Patzek2 , SPE Copyright 2002, Society of Petroleum Engineers, Inc, as presented, have not been reviewed by the Society of Petroleum Engineers and are subject to correction

Patzek, Tadeusz W.

45

Society of Petroleum Engineers Staggered In Time Coupling of Reservoir Flow Simulation and Geomechanical Defor-  

E-Print Network [OSTI]

Society of Petroleum Engineers SPE 51920 Staggered In Time Coupling of Reservoir Flow Simulation, The University of Texas at Austin Copyright 1999, Society of Petroleum Engineers, Inc. Thispaperwas by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented

Minkoff, Susan E.

46

Session 3280 Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition  

E-Print Network [OSTI]

Session 3280 Proceedings of the 2002 American Society for Engineering Education Annual Conference that inhibit learning for some students. The #12;Session 3280 Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition Copyright © 2002, American Society for Engineering

Larkin, Teresa L.

47

Session 2480 "Proceedings of the 2003 American Society for Engineering Education Annual Conference & Exposition  

E-Print Network [OSTI]

Session 2480 "Proceedings of the 2003 American Society for Engineering Education Annual Conference as the use of live, online chats #12;"Proceedings of the 2003 American Society for Engineering Education Annual Conference & Exposition Copyright © 2003, American Society for Engineering Education" using

Larkin, Teresa L.

48

Audio Engineering Society Convention PaperPresented at the 111th Convention  

E-Print Network [OSTI]

Audio Engineering Society Convention PaperPresented at the 111th Convention 2001 September 21 for the contents. Additional papers may be obtained by sending request and remittance to Audio Engineering Society of the Audio Engineering Society. Bayesian Harmonic Analysis for Audio Testing and Measurement Thomas J. Loredo

Loredo, Thomas J.

49

Society of Petroleum Engineers Simulation of Foam Transport in Porous Media  

E-Print Network [OSTI]

Society of Petroleum Engineers SPE 26402 Simulation of Foam Transport in Porous Media A.R. Kovscek, T.W. Patzek, and C.J. Radke, U. of California SPE Members Copyright 1993, Society of Petroleum and Exhibition of the Society of Petroleum Engineers held in Houston, Texas, 3-6 October 1993. This paper

Patzek, Tadeusz W.

50

Official Constitution and Bylaws of the Saskatoon Engineering Students' Society Inc.  

E-Print Network [OSTI]

and services. (d) To support the initiatives of student groups within the engineering community. (e) To provideOfficial Constitution and Bylaws of the Saskatoon Engineering Students' Society Inc. Article I Definition of the Society Section 1 Name 1.1 The name of the organization shall be "The Saskatoon Engineering

Saskatchewan, University of

51

Penn Engineering Alumni Society Report : October 2010 Submitted by Farnia Fresnel, President  

E-Print Network [OSTI]

Support the Career Services mentoring program Host a summer BBQ for graduate engineering studentsPenn Engineering Alumni Society Report : October 2010 Submitted by Farnia Fresnel, President http://www.seas.upenn.edu/alumni/alumnisociety The Penn Engineering Alumni Society Board is supported by more than 30 active members who attend monthly

Plotkin, Joshua B.

52

Penn Engineering Alumni Society Report (May 2009) Submitted by Harris G. Romanoff, President ('98)  

E-Print Network [OSTI]

Participated in mock interview sessions for students, coordinated by Engineering Career Services Annual EASPenn Engineering Alumni Society Report (May 2009) Submitted by Harris G. Romanoff, President ('98) We had a very exciting and event filled calendar this past year in the Engineering Alumni Society

Plotkin, Joshua B.

53

Session 2480 Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition  

E-Print Network [OSTI]

Session 2480 Proceedings of the 2001 American Society for Engineering Education Annual Conference that follows, highlights of many of the workshop activities are outlined. #12;Session 2480 Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition Copyright © 2001

Larkin, Teresa L.

54

Society of Petroleum Engineers Scholarship 2014 R E G U L A T I O N S  

E-Print Network [OSTI]

Society of Petroleum Engineers Scholarship 2014 R E G U L A T I O N S BACKGROUND This Scholarship was established in 2009 by the Society of Petroleum Engineers. The Society of Petroleum Engineers (SPE) is a world-wide organisation which supports the interests of the Petroleum industry. SPE's mission is to provide the means

Waikato, University of

55

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 SPE Intelligent Energy Conference and  

E-Print Network [OSTI]

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Prasanna, Viktor K.

56

Society of Petroleum Engineers A New Approach to Predict Bit Life Based on Tooth or Bearing Failures  

E-Print Network [OSTI]

ms m . . . Society of Petroleum Engineers SPE 51082 A New Approach to Predict Bit Life Based. Aminian, SPE, West Virginia U. Copyright 1998, Society of Petroleum Engineers Inc. This paper was prepared by the Society .of Petroleum Engineers and are subject to correction by the author(s). The material, as presented

Mohaghegh, Shahab

57

Copyright 2000, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the International Symposium on Formation  

E-Print Network [OSTI]

Copyright 2000, Society of Petroleum Engineers, Inc. This paper was prepared for presentation reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

58

Copyright 1996, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the 1997 SPE Production  

E-Print Network [OSTI]

Copyright 1996, Society of Petroleum Engineers, Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Patzek, Tadeusz W.

59

Copyright 1997, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the 1997 SPE Western Regional  

E-Print Network [OSTI]

Copyright 1997, Society of Petroleum Engineers, Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Patzek, Tadeusz W.

60

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 SPE Annual Technical Conference and  

E-Print Network [OSTI]

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers

Van den Hof, Paul

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Copyright 2005, Society of Petroleum Engineers This paper was prepared for presentation at the 2005 SPE Annual Technical Conference and  

E-Print Network [OSTI]

Copyright 2005, Society of Petroleum Engineers This paper was prepared for presentation at the 2005 reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Patzek, Tadeusz W.

62

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 1999 SPE Reservoir Simulation Symposium  

E-Print Network [OSTI]

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Peszynska, Malgorzata

63

Copyright 2004, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 2005 SPE Reservoir Simulation Symposium  

E-Print Network [OSTI]

Copyright 2004, Society of Petroleum Engineers Inc. This paper was prepared for presentation not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers

Sambridge, Malcolm

64

Copyright 2004, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the SPE Annual Technical Conference and  

E-Print Network [OSTI]

Copyright 2004, Society of Petroleum Engineers Inc. This paper was prepared for presentation reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Mohaghegh, Shahab

65

Copyright 2005, Society of Petroleum Engineers This paper was prepared for presentation at the 2005 SPE Annual Technical Conference and  

E-Print Network [OSTI]

Copyright 2005, Society of Petroleum Engineers This paper was prepared for presentation at the 2005 by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Mohaghegh, Shahab

66

Session 1566 Proceedings of the 2003 American Society for Engineering Education Annual Conference and Exhibition  

E-Print Network [OSTI]

the fundamental areas together in the context of engineering systems. We also wish to enhance students' ability of systems used to date include commercial aircraft and their turbofan engines, Diesel and gas turbineSession 1566 Proceedings of the 2003 American Society for Engineering Education Annual Conference

Ben-Yakar, Adela

67

REISS ET AL. COMPRESSION FOR SUPER AUDIO CD Audio Engineering Society  

E-Print Network [OSTI]

REISS ET AL. COMPRESSION FOR SUPER AUDIO CD _________________________________ Audio Engineering be obtained by sending request and remittance to Audio Engineering Society, 60 East 42nd Street, New York, New portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering

Reiss, Josh

68

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 SPE Gas Technology Symposium held  

E-Print Network [OSTI]

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented

Mohaghegh, Shahab

69

Society, Technology and the Environment-3credit hours Spanish for Engineering-6 credit hours  

E-Print Network [OSTI]

Society, Technology and the Environment- 3credit hours Spanish for Engineering- 6 credit hours 21st May to 22nd June 2012 The University of Alabama College of Engineering in collaboration with Pamplona for any student interested in technology and the environment; students will have the opportunity to study

Simaan, Nabil

70

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 Abu Dhabi International Petroleum  

E-Print Network [OSTI]

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 Abu Dhabi International Petroleum Exhibition and Conference held in Abu Dhabi, U.A.E., 5­8 November not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author

Mohaghegh, Shahab

71

Constitution The primary goal of the Wayne State University Chapter of the Biomedical Engineering Society (BMES) is to  

E-Print Network [OSTI]

Engineering Society (BMES) is to promote biomedical engineering knowledge and its utilization and to serve all students interested in biomedical engineering by assisting in their academic, professional, and social the profession of biomedical engineering though the organized effort of this group in study, research

Berdichevsky, Victor

72

Copyright 2004, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the SPE Formation Damage Conference held in  

E-Print Network [OSTI]

SPE 86526 Copyright 2004, Society of Petroleum Engineers, Inc. This paper was prepared by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

73

Copyright 1997, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the 1997 SPE Western Regional Meeting held in  

E-Print Network [OSTI]

Copyright 1997, Society of Petroleum Engineers, Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Patzek, Tadeusz W.

74

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 1999 SPE Annual Technical Conference and  

E-Print Network [OSTI]

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Mohaghegh, Shahab

75

Copyright 2000, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 2000 SPE/DOE Improved Oil Recovery  

E-Print Network [OSTI]

Copyright 2000, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Patzek, Tadeusz W.

76

Copyright 2003, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the SPE Western Regional/AAPG Pacific Section  

E-Print Network [OSTI]

Copyright 2003, Society of Petroleum Engineers Inc. This paper was prepared for presentation not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any posi- tion of the Society of Petroleum Engineers

Mohaghegh, Shahab

77

Copyright 2000, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 2000 SPE/DOE Improved Oil Recovery Symposium  

E-Print Network [OSTI]

Copyright 2000, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Patzek, Tadeusz W.

78

Copyright 2001, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 2001 SPE Annual Technical Conference and  

E-Print Network [OSTI]

Copyright 2001, Society of Petroleum Engineers Inc. This paper was prepared for presentation not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers

New York at Stoney Brook, State University of

79

Copyright 1998, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the 1998 SPE/DOE Improved Oil Recovery  

E-Print Network [OSTI]

Copyright 1998, Society of Petroleum Engineers, Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Patzek, Tadeusz W.

80

Copyright 1998, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the 1998 SPE Annual Technical Conference and  

E-Print Network [OSTI]

Copyright 1998, Society of Petroleum Engineers, Inc. This paper was prepared for presentation not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers

Williams, John M.

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Copyright 2007, Society of Petroleum Engineers This paper was prepared for presentation at the SPE Europec/EAGE Annual Conference and  

E-Print Network [OSTI]

Copyright 2007, Society of Petroleum Engineers This paper was prepared for presentation at the SPE by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

82

Copyright 2000, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 2000 SPE Annual Technical Conference and  

E-Print Network [OSTI]

Copyright 2000, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Mohaghegh, Shahab

83

Copyright 2007, Society of Petroleum Engineers This paper was prepared for presentation at the 2007 SPE Eastern Regional Meeting held in  

E-Print Network [OSTI]

Copyright 2007, Society of Petroleum Engineers This paper was prepared for presentation at the 2007 by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Mohaghegh, Shahab

84

Copyright 2000, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 2000 SPE Eastern Regional Meeting held in  

E-Print Network [OSTI]

Copyright 2000, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Mohaghegh, Shahab

85

Copyright 2005, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 2005 SPE Western Regional Meeting held in  

E-Print Network [OSTI]

Copyright 2005, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Patzek, Tadeusz W.

86

Copyright 2001, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the SPE Reservoir Simulation Symposium held in  

E-Print Network [OSTI]

Copyright 2001, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers

Elmroth, Erik

87

The Royal Society's War Committee on Engineering 191419  

Science Journals Connector (OSTI)

...engineering investigation. A device for catching submarines. Torpedo...flechettes]. As to appliances for listening in mines. As to range-finders...creeping mine, an anti-ship device that would drift into harbours...buoyancy of a free-floating device eventually took hold, giving...

2008-01-01T23:59:59.000Z

88

Society of Cable Telecommunications Engineers | Open Energy Information  

Open Energy Info (EERE)

Cable Telecommunications Engineers Cable Telecommunications Engineers Jump to: navigation, search Logo: SCTE Name SCTE Address 140 Philips Rd Place Exton, Pennsylvania Zip 19341 Region Northeast - NY NJ CT PA Area Number of employees 11-50 Year founded 1969 Phone number 610-363-6888 Website http://www.scte.org/ Coordinates 40.0634614°, -75.6439227° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.0634614,"lon":-75.6439227,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

89

Copyright 1998, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 1998 SPE Eastern Regional Meeting held in  

E-Print Network [OSTI]

Copyright 1998, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented

Mohaghegh, Shahab

90

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 1999 SPE Middle East Oil Show held in  

E-Print Network [OSTI]

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented

Al-Majed, Abdulaziz Abdullah

91

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 1999 SPE Eastern Regional Meeting held in  

E-Print Network [OSTI]

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented

Mohaghegh, Shahab

92

Copyright 2005, Society of Petroleum Engineers This paper was prepared for presentation at the 2005 SPE Eastern Regional Meeting held in  

E-Print Network [OSTI]

Copyright 2005, Society of Petroleum Engineers This paper was prepared for presentation at the 2005 by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented

Mohaghegh, Shahab

93

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 SPE Eastern Regional Meeting held in  

E-Print Network [OSTI]

Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented

Mohaghegh, Shahab

94

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 1999 SPE Gas Technology Sysmposium held  

E-Print Network [OSTI]

Copyright 1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented

Mohaghegh, Shahab

95

International Journal of Offshore and Polar Engineering (ISSN 1053-5381) Copyright by The International Society of Offshore and Polar Engineers  

E-Print Network [OSTI]

International Journal of Offshore and Polar Engineering (ISSN 1053-5381) Copyright © by The International Society of Offshore and Polar Engineers Vol. 15, No. 2, June 2005, pp. 1­9 On Assessing the Accuracy of Offshore Wind Turbine Reliability-based Design Loads from the Environmental Contour Method Korn

Manuel, Lance

96

Introduction to Nuclear Issues (Our only discussion of non-technical issues) Mechanical Engineering magazine, American Society of Mechanical Engineers publication.  

E-Print Network [OSTI]

Introduction to Nuclear Issues (Our only discussion of non-technical issues) Mechanical Engineering magazine, American Society of Mechanical Engineers publication. September 2006: Letters to the Editor begin. January 2007: Response To the Editor: The September letters section contains two items relating to nuclear

Ervin, Elizabeth K.

97

Transactions of the ASAE Vol. 44(6): 18651871 E 2001 American Society of Agricultural Engineers ISSN 00012351 1865  

E-Print Network [OSTI]

Transactions of the ASAE Vol. 44(6): 1865­1871 E 2001 American Society of Agricultural Engineers & Environment Division of ASAE in September 2001. Part of this paper, entitled Characterization of Raw Oil. The authors are Bingjun He, ASAE Member Engineer, Assistant Professor, Department of Biological

He, Brian

98

American Society for Engineering Education March 31-April 1, 2006 Indiana University Purdue University Fort Wayne (IPFW)  

E-Print Network [OSTI]

American Society for Engineering Education March 31-April 1, 2006 ­ Indiana University Purdue Engineering Northern Illinois University, De Kalb, IL Email: kostic@niu.edu ABSTRACT A new, simple educational are colloidal suspensions of nanosize particles, including fibers or composites, in base fluids. They may

Kostic, Milivoje M.

99

At the School of Electrical Engineering, science and engineering meet society. Our portfolio covers fields from  

E-Print Network [OSTI]

integrated solutions from care of the elderly to space robotics. Energy issues are central at the School of energy will pose major challenges to humankind in the near future. Carbon dioxide emissions must of Electri- cal Engineering. We develop sustainable information technology solutions for wireless devices

Kaski, Samuel

100

Session II-D-3 American Society for Engineering Education March 27, 2004 Bradley University/Illinois Central College, Peoria, Illinois  

E-Print Network [OSTI]

% Otto (gasoline) engine 25-35 Diesel engine 30-40 Gas turbine 30-40 Steam turbine 30-40 Nuclear, steamSession II-D-3 American Society for Engineering Education March 27, 2004 Bradley University/Illinois Central College, Peoria, Illinois 2004 IL/IN Sectional Conference FUEL-CELL AND HEAT-ENGINE ENERGY

Kostic, Milivoje M.

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

FCTO Announces Plenary Talk at American Society of Mechanical Engineers Energy Sustainability and Fuel Cell Technology Conference  

Broader source: Energy.gov [DOE]

The Fuel Cell Technologies Office announces a plenary talk by Dr. Sunita Satyapal, Director, Fuel Cell Technologies Office at the American Society of Mechanical Engineers (ASME) Energy Sustainability and Fuel Cell Technology Conference in Boston, Massachusetts, between June 30 and July 2, 2014.

102

OLED area illumination source  

DOE Patents [OSTI]

The present invention relates to an area illumination light source comprising a plurality of individual OLED panels. The individual OLED panels are configured in a physically modular fashion. Each OLED panel comprising a plurality of OLED devices. Each OLED panel comprises a first electrode and a second electrode such that the power being supplied to each individual OLED panel may be varied independently. A power supply unit capable of delivering varying levels of voltage simultaneously to the first and second electrodes of each of the individual OLED panels is also provided. The area illumination light source also comprises a mount within which the OLED panels are arrayed.

Foust, Donald Franklin (Scotia, NY); Duggal, Anil Raj (Niskayuna, NY); Shiang, Joseph John (Niskayuna, NY); Nealon, William Francis (Gloversville, NY); Bortscheller, Jacob Charles (Clifton Park, NY)

2008-03-25T23:59:59.000Z

103

1 S.R. REEVES, D.G. HILL, R.L. TINER, P.A. BASTIAN, M.W. CONWAY & S. MOHAGHEGH SPE 55627 Copyright 1999, Society of Petroleum Engineers Inc.  

E-Print Network [OSTI]

1999, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the 1999 SPE by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented

Mohaghegh, Shahab

104

Microwave Quantum Illumination  

E-Print Network [OSTI]

Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally-occurring bright thermal background in the microwave regime. We use an electro-optomechanical converter to entangle microwave signal and optical idler fields, with the former being sent to probe the target region and the latter being retained at the source. The microwave radiation collected from the target region is then phase conjugated and upconverted into an optical field that is combined with the retained idler in a joint-detection quantum measurement. The error probability of this microwave quantum-illumination system, or 'quantum radar', is shown to be superior to that of any classical microwave radar of equal transmitted energy.

Shabir Barzanjeh; Saikat Guha; Christian Weedbrook; David Vitali; Jeffrey H. Shapiro; Stefano Pirandola

2014-10-15T23:59:59.000Z

105

Microwave Quantum Illumination  

E-Print Network [OSTI]

Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally-occurring bright thermal background in the microwave regime. We use an electro-optomechanical converter to entangle microwave signal and optical idler fields, with the former being sent to probe the target region and the latter being retained at the source. The microwave radiation collected from the target region is then phase conjugated and upconverted into an optical field that is combined with the retained idler in a joint-detection quantum measurement. The error probability of this microwave quantum-illumination system, or 'quantum radar', is shown to be superior to that of any classical microwave radar of equal transmit...

Barzanjeh, Shabir; Weedbrook, Christian; Vitali, David; Shapiro, Jeffrey H; Pirandola, Stefano

2014-01-01T23:59:59.000Z

106

In: ALT'96 International Symposium on Laser Methods for Biomedical Applications. ( Edited by V. Pustovoy). SPIE The International Society for Optical Engineering. Volume 2965, pp. 70 82. 1997.  

E-Print Network [OSTI]

In: ALT'96 International Symposium on Laser Methods for Biomedical Applications. ( Edited by V. Pustovoy). SPIE ­ The International Society for Optical Engineering. Volume 2965, pp. 70 ­ 82. 1997 of Civil and Environmental Engineering at the University of Alabama at Birmingham (UAB

Pitt, Robert E.

107

American Society for Engineering Education April 1-2, 2005 Northern Illinois University, DeKalb, Illinois. 2005 IL/IN Sectional Conference  

E-Print Network [OSTI]

American Society for Engineering Education April 1-2, 2005 ­ Northern Illinois University, DeKalb, Illinois. 2005 IL/IN Sectional Conference Session D-T3-3 INTRODUCING CREATIVITY AND ARTISTIC EXPRESSION INTO ENGINEERING TECHNOLOGY COURSES David P. Devine Indiana University Purdue University Fort Wayne, Fort Wayne

Kostic, Milivoje M.

108

Split-illumination electron holography  

SciTech Connect (OSTI)

We developed a split-illumination electron holography that uses an electron biprism in the illuminating system and two biprisms (applicable to one biprism) in the imaging system, enabling holographic interference micrographs of regions far from the sample edge to be obtained. Using a condenser biprism, we split an electron wave into two coherent electron waves: one wave is to illuminate an observation area far from the sample edge in the sample plane and the other wave to pass through a vacuum space outside the sample. The split-illumination holography has the potential to greatly expand the breadth of applications of electron holography.

Tanigaki, Toshiaki; Aizawa, Shinji; Suzuki, Takahiro; Park, Hyun Soon [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Inada, Yoshikatsu [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan); Matsuda, Tsuyoshi [Japan Science and Technology Agency, Kawaguchi, Saitama 332-0012 (Japan); Taniyama, Akira [Corporate Research and Development Laboratories, Sumitomo Metal Industries, Ltd., Amagasaki, Hyogo 660-0891 (Japan); Shindo, Daisuke [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan); Tonomura, Akira [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Okinawa Institute of Science and Technology, Graduate University, Onna-son, Okinawa 904-0495 (Japan); Central Research Laboratory, Hitachi, Ltd., Hatoyama, Saitama 350-0395 (Japan)

2012-07-23T23:59:59.000Z

109

Solar illumination device  

SciTech Connect (OSTI)

A solar concentrator is described for illuminating the interior of a building through a side wall thereof. The concentrator consists of: a stationary reflective collector located to view the sky and having discrete planar collector surfaces mounted in abutting relationship, the collector surface installed at an angle with respect to the vertical different from the angle of installation of the abutting collector surfaces; a stationary reflective reflector positioned to receive direct solar energy reflected by the collector and oriented to reflect such energy toward a target within the building, the reflector having a plurality of discrete planar reflector surfaces the reflector surface mounted in abutting relationship, the reflector surface installed at an angle with respect to the vertical different from the angle of installation of the abutting reflector surfaces; a low angle shield means for preventing direct solar rays from entering unreflected into the building between the collector and the reflector and penetrating a horizontal plane above the floor of the building, the horizontal plane spaced from the floor a distance substantially equal to the height of the eye of an occupant standing on the floor of the building, the low angle shield means including an opaque material and being affixed to the reflector; and a shield means for preventing rays reflected by the collector and the reflector from penetrating the horizontal plane, the shield means affixed to the building and extending in a generally horizontal direction.

Eijadi, D.; Bennett, D.J.

1986-06-10T23:59:59.000Z

110

United Illuminating | Open Energy Information  

Open Energy Info (EERE)

Illuminating Illuminating Jump to: navigation, search Logo: United Illuminating Name United Illuminating Address 157 Church St Place New Haven, Connecticut Zip 06510 Sector Services Product Green Power Marketer Website http://www.uinet.com/ Coordinates 41.3073289°, -72.9247896° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.3073289,"lon":-72.9247896,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

111

Specimen illumination apparatus with optical cavity for dark field illumination  

DOE Patents [OSTI]

An illumination apparatus with a specimen slide holder, an illumination source, an optical cavity producing multiple reflection of illumination light to a specimen comprising a first and a second reflective surface arranged to achieve multiple reflections of light to a specimen is provided. The apparatus can further include additional reflective surfaces to achieve the optical cavity, a slide for mounting the specimen, a coverslip which is a reflective component of the optical cavity, one or more prisms for directing light within the optical cavity, antifading solutions for improving the viewing properties of the specimen, an array of materials for analysis, fluorescent components, curved reflective surfaces as components of the optical cavity, specimen detection apparatus, optical detection equipment, computers for analysis of optical images, a plane polarizer, fiberoptics, light transmission apertures, microscopic components, lenses for viewing the specimen, and upper and lower mirrors above and below the specimen slide as components of the optical cavity. Methods of using the apparatus are also provided.

Pinkel, Daniel (Walnut Creek, CA); Sudar, Damir (Walnut Creek, CA); Albertson, Donna (Lafayette, CA)

1999-01-01T23:59:59.000Z

112

Making Global Illumination User Friendly  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Making Global Illumination User Friendly Making Global Illumination User Friendly Title Making Global Illumination User Friendly Publication Type Conference Paper LBNL Report Number LBL-37860 Year of Publication 1995 Authors Ward, Gregory J. Conference Name 6th Eurographics Workshop on Rendering Date Published 06/1995 Conference Location Dublin, Ireland Call Number LBL-37860 Abstract Global illumination researchers tend to think in terms of mesh density and sampling frequency, and their software reflects this in its user interface. Advanced rendering systems are rife with long command lines and parameters for tuning the sample densities, thresholds and other algorithm-specific variables, and the novice user is quickly lost in a sea of possibilities. This paper details a successful effort of making one such global illumination system usable by people who understand their problems, even if they do not understand the methods needed to solve them, through an assisted oracle approach. A single program is introduced to map a small set of intuitive control variables to the rendering commands and parameter settings needed to produce the desired output in a reasonable time. This new executive program then serves as the basis for a graphical user interface that is both friendly in its appearance and reliable in its performance. Finally, we conclude with some future directions for improving this interface.

113

TWENTY-FIRST ANNUAL MEETING OF THE SOCIETY FOR THE PROMOTION OF ENGINEERING EDUCATION  

Science Journals Connector (OSTI)

...Guilelmi occurs in greatest abundance at Queenstown and Cath-cart. It has a majestic trunk and a fine crown of glaucous leaves...buildings for technical schools, instruction in highway and in hydraulic engineering, in shop-work and in drawing. The general subject...

1913-08-01T23:59:59.000Z

114

BEE 251/ENGRD 251. Engineering for a Sustainable Society Credit: 3 hours  

E-Print Network [OSTI]

systems, air quality, hazardous waste management and sustainable development. Emphasis is on the application of math, physics and engineering sciences to solve energy and mass balances in environmental sciences. The students will be introduced to the basic chemistry, ecology and biology, ethics

Walter, M.Todd

115

Laser illuminated flat panel display  

SciTech Connect (OSTI)

A 10 inch laser illuminated flat panel Planar Optic Display (POD) screen has been constructed and tested. This POD screen technology is an entirely new concept in display technology. Although the initial display is flat and made of glass, this technology lends itself to applications where a plastic display might be wrapped around the viewer. The display screen is comprised of hundreds of planar optical waveguides where each glass waveguide represents a vertical line of resolution. A black cladding layer, having a lower index of refraction, is placed between each waveguide layer. Since the cladding makes the screen surface black, the contrast is high. The prototype display is 9 inches wide by 5 inches high and approximately I inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

Veligdan, J.T.

1995-12-31T23:59:59.000Z

116

Illumination box and camera system  

DOE Patents [OSTI]

A hand portable, field-deployable thin-layer chromatography (TLC) unit and a hand portable, battery-operated unit for development, illumination, and data acquisition of the TLC plates contain many miniaturized features that permit a large number of samples to be processed efficiently. The TLC unit includes a solvent tank, a holder for TLC plates, and a variety of tool chambers for storing TLC plates, solvent, and pipettes. After processing in the TLC unit, a TLC plate is positioned in a collapsible illumination box, where the box and a CCD camera are optically aligned for optimal pixel resolution of the CCD images of the TLC plate. The TLC system includes an improved development chamber for chemical development of TLC plates that prevents solvent overflow.

Haas, Jeffrey S. (San Ramon, CA); Kelly, Fredrick R. (Modesto, CA); Bushman, John F. (Oakley, CA); Wiefel, Michael H. (La Honda, CA); Jensen, Wayne A. (Livermore, CA); Klunder, Gregory L. (Oakland, CA)

2002-01-01T23:59:59.000Z

117

Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior |  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior Published Middle East Asia Reservior Reviiew, 2006 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior Citation Crosswell Electromagnetic Resistivity Imaging: Illuminating the Reservior [Internet]. 2006. Middle East Asia Reservior Reviiew. [cited 2013/10/22]. Available from: http://www.slb.com/~/media/Files/resources/mearr/num7/illuminating_reservoir.pdf Retrieved from

118

Lawrence E. Carlson Professor of Mechanical Engineering  

E-Print Network [OSTI]

Education, American Society of Mechanical Engineers, pp. 31-33. Solar Stirling Engine 2Cam Rock Climbing

Carlson, Lawrence E.

119

Low-Cost Illumination-Grade LEDs  

SciTech Connect (OSTI)

Solid State Lighting is a cost-effective, energy-conserving technology serving a rapidly expand- ing multi-billion dollar market. This program was designed to accelerate this lighting revolution by reducing the manufacturing cost of Illumination-Grade LEDs. The technical strategy was to investigate growth substrate alternatives to standard planar sapphire, select the most effective and compatible option, and demonstrate a significant increase in Lumen/$ with a marketable LED. The most obvious alternate substrate, silicon, was extensively studied in the first two years of the program. The superior thermal and mechanical properties of Si were expected to improve wavelength uniformity and hence color yield in the manufacture of high-power illumination- grade LEDs. However, improvements in efficiency and epitaxy uniformity on standard c-plane sapphire diminished the advantages of switching to Si. Furthermore, the cost of sapphire decreased significantly and the cost of processing Si devices using our thin film process was higher than expected. We concluded that GaN on Si was a viable technology but not a practical option for Philips Lumileds. Therefore in 2012 and 2013, we sought and received amendments which broadened the scope to include other substrates and extended the time of execution. Proprietary engineered substrates, off-axis (non-c-plane) sapphire, and c-plane patterned sapphire substrates (PSS) were all investigated in the final 18 months of this program. Excellent epitaxy quality was achieved on all three candidates; however we eliminated engineered substrates and non-c-plane sapphire because of their higher combined cost of substrate, device fabrication and packaging. Ultimately, by fabricating a flip-chip (FC) LED based upon c-plane PSS we attained a 42% reduction in LED manufacturing cost relative to our LUXEON Rebel product (Q1-2012). Combined with a flux gain from 85 to 102 Lm, the LUXEON Q delivered a 210% increase in Lm/$ over this time period. The technology was commercialized in our LUXEON Q product in Sept., 2013. Also, the retention of the sapphire increased the robustness of the device, enabling sales of low-cost submount-free chips to lighting manufacturers. Thus, blue LED die sales were initiated in the form of a PSS-FC in February, 2013.

Epler, John

2013-08-31T23:59:59.000Z

120

Fully depleted back illuminated CCD  

DOE Patents [OSTI]

A backside illuminated charge coupled device (CCD) is formed of a relatively thick high resistivity photon sensitive silicon substrate, with frontside electronic circuitry, and an optically transparent backside ohmic contact for applying a backside voltage which is at least sufficient to substantially fully deplete the substrate. A greater bias voltage which overdepletes the substrate may also be applied. One way of applying the bias voltage to the substrate is by physically connecting the voltage source to the ohmic contact. An alternate way of applying the bias voltage to the substrate is to physically connect the voltage source to the frontside of the substrate, at a point outside the depletion region. Thus both frontside and backside contacts can be used for backside biasing to fully deplete the substrate. Also, high resistivity gaps around the CCD channels and electrically floating channel stop regions can be provided in the CCD array around the CCD channels. The CCD array forms an imaging sensor useful in astronomy.

Holland, Stephen Edward (Hercules, CA)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Illumination in Microlithography - A Brief History  

Science Journals Connector (OSTI)

Historically, illumination design has been linked with the development of microlithography technologies and many tricks have been developed to achieve resolutions below the classical...

Smith, Daniel

122

LED Illumination with a Condensing Sphere  

Science Journals Connector (OSTI)

Novel compact and efficient illumination systems are described which comprise dielectric spheres with planar cuts at the edges and imbedded light emitting diodes. The rays are...

Chi, Wanli; George, Nicholas

123

Shadowgraph illumination techniques for framing cameras  

SciTech Connect (OSTI)

Many pulse power applications in use at the Pegasus facility at the Los Alamos National Laboratory require specialized imaging techniques. Due to the short event duration times, visible images are recorded by high-speed electronic framing cameras. Framing cameras provide the advantages of high speed movies of back light experiments. These high-speed framing cameras require bright illumination sources to record images with 10 ns integration times. High-power lasers offer sufficient light for back illuminating the target assemblies; however, laser speckle noise lowers the contrast in the image. Laser speckle noise also limits the effective resolution. This discussion focuses on the use of telescopes to collect images 50 feet away. Both light field and dark field illumination techniques are compared. By adding relay lenses between the assembly target and the telescope, a high-resolution magnified image can be recorded. For dark field illumination, these relay lenses can be used to separate the object field from the illumination laser. The illumination laser can be made to focus onto the opaque secondary of a Schmidt telescope. Thus, the telescope only collects scattered light from the target assembly. This dark field illumination eliminates the laser speckle noise and allows high-resolution images to be recorded. Using the secondary of the telescope to block the illumination laser makes dark field illumination an ideal choice for the framing camera.

Malone, R.M.; Flurer, R.L.; Frogget, B.C. [Bechtel Nevada, Los Alamos, NM (United States). Los Alamos Operations; Sorenson, D.S.; Holmes, V.H.; Obst, A.W. [Los Alamos National Lab., NM (United States)

1997-12-31T23:59:59.000Z

124

Engineering  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering Engineering Engineering1354608000000EngineeringSome of these resources are LANL-only and will require Remote Access./No/Questions? 667-5809library@lanl.gov Engineering Some of these resources are LANL-only and will require Remote Access. Key Resources Reference Standards Data Sources Organizations Journals Key Resources Engineering Village Includes Engineering Index (Ei) and Compendex Knovel Handbooks, databases, and eBooks integrated with analytical and search tools IEEE Xplore Full text access to technical literature, standards, and conference proceedings in engineering and technology SPIE Digital Library Full-text papers from SPIE journals and proceedings published since 1998; subject coverage includes optics, photonics, electronic imaging, visual information processing, biomedical optics, lasers, and

125

Annual General Conference of the Canadian Society for Civil Engineering Congrs gnral annuel de la Socit canadienne de gnie civil  

E-Print Network [OSTI]

for Building Studies; Department of Building, Civil and Environmental Engineering, Concordia University, pollution, smoke and fire propagation (Hutcheon, 1963). Yet, like the structural system, the building COMPUTER TOOL TO ACHIEVE BETTER PERFORMANCE AND INTEGRATION OF BUILDING ENVELOPES WITH STRUCTURAL

Hammad, Amin

126

Applied Engineering in Agriculture Vol. 21(2): 307-311 E 2005 American Society of Agricultural Engineers ISSN 0883-8542 307  

E-Print Network [OSTI]

Engineers ISSN 0883-8542 307 PERIPHYTIC CHLOROPHYLL-A RESPONSE TO TRICLOSAN EXPOSURE: APPLICATION allowed to colonize an artificial substrate. The proliferation of Triclosan (TCS) in consumer products has investigation. Keywords. Antimicrobial agents, Chlorophyll-a, Triclosan, Periphytometer. hemical toxicity

Migliaccio, Kati White

127

Applied Engineering in Agriculture Vol. 23(1): 71-76 E 2007 American Society of Agricultural and Biological Engineers ISSN 0883-8542 71  

E-Print Network [OSTI]

be a problem in bio- diesel storage for biodiesel producers, distributors, and con- sumers, and must be avoided and Biological Engineers ISSN 0883-8542 71 MOISTURE ABSORPTION IN BIODIESEL AND ITS PETRO-DIESEL BLENDS B. B. He of absorbing more moisture than petroleum diesel. High moisture content in biodiesel can cause problems

He, Brian

128

Eden Park Illumination | Open Energy Information  

Open Energy Info (EERE)

Illumination Illumination Jump to: navigation, search Name Eden Park Illumination Place Champaign, Illinois Zip 61821 Product Illinois-based startup focused on the commercialisation and development of highly efficient microplasma lighting. Coordinates 40.1142°, -88.243499° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.1142,"lon":-88.243499,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

129

Organic light emitting devices for illumination  

SciTech Connect (OSTI)

An organic light emitting device an a method of obtaining illumination from such a device is provided. The device has a plurality of regions, each region having an organic emissive layer adapted to emit a different spectrum of light. The regions in combination emit light suitable for illumination purposes. The area of each region may be selected such that the device is more efficient than an otherwise equivalent device having regions of equal size. The regions may have an aspect ratio of at least about four. All parts of any given region may be driven at the same current.

Hack, Michael (Lambertville, NJ); Lu, Min-Hao Michael (Lawrenceville, NJ); Weaver, Michael S. (Princeton, NJ)

2012-01-24T23:59:59.000Z

130

Fiber-type dosimeter with improved illuminator  

DOE Patents [OSTI]

A single-piece, molded plastic, Cassigrainian-type condenser arrangement is incorporated in a tubular-shaped personal pocket dosimeter of the type which combines an ionization chamber with an optically-read fiber electrometer to provide improved illumination of the electrometer fiber. The condenser routes incoming light from one end of the dosimeter tubular housing around a central axis charging pin assembly and focuses the light at low angles to the axis so that it falls within the acceptance angle of the electrometer fiber objective lens viewed through an eyepiece lens disposed in the opposite end of the dosimeter. This results in improved fiber illumination and fiber image contrast.

Fox, Richard J. (Oak Ridge, TN)

1987-01-01T23:59:59.000Z

131

Fiber-type dosimeter with improved illuminator  

DOE Patents [OSTI]

A single-piece, molded plastic, Cassigrainian-type condenser arrangement is incorporated in a tubular-shaped personal pocket dosimeter of the type which combines an ionization chamber with an optically-read fiber electrometer to provide improved illumination of the electrometer fiber. The condenser routes incoming light from one end of the dosimeter tubular housing around a central axis charging pin assembly and focuses the light at low angles to the axis so that it falls within the acceptance angle of the electrometer fiber objective lens viewed through an eyepiece lens disposed in the opposite end of the dosimeter. This results in improved fiber illumination and fiber image contrast.

Fox, R.J.

1985-12-23T23:59:59.000Z

132

Interactive Display of Isosurfaces with Global Illumination  

Science Journals Connector (OSTI)

In many applications, volumetric data sets are examined by displaying isosurfaces, surfaces where the data, or some function of the data, takes on a given value. Interactive applications typically use local lighting models to render such surfaces. This ... Keywords: Path tracing, isosurface, visualization, rendering, global illumination, precomputed radiance transfer.

Chris Wyman; Steven Parker; Peter Shirley; Charles Hansen

2006-03-01T23:59:59.000Z

133

Engineering  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering Engineering Lawrence Livermore National Laboratory Home Technologies Core Competencies Showcase Careers Partnerships About Advanced Manufacturing Developing high-performance materials, devices, components, and assemblies enabled by innovative design tools and novel manufacturing techniques Learn more Applied Electromagnetics Supporting the development of electromagnetic systems that are pervasive and paramount to the greater National Security community. Learn more Data Sciences Enabling better decisions through the development and application of state-of-the-art techniques in machine learning, statistics, and decision sciences Learn more Precision Engineering Embracing determinism to guide rigorous design, construction, and metrology of mechatronic systems, instruments, and manufactured components

134

Design Editorial A Design Societies Federation  

E-Print Network [OSTI]

Journal of Mechanical Design Editorial A Design Societies Federation You can recognize the many faces of design by looking at the many different professional societies that promote design around the world. These societies may have roots in engineering or archi- tecture or industrial design but they all

Papalambros, Panos

135

Tom wins Distinguished Scientist, Engineer Award  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Recipient of the 2013 Distinguished ScientistEngineer Award Tom wins Distinguished Scientist, Engineer Award The Minerals, Metals & Materials Society recognized Tom for his...

136

Transactions of the ASABE Vol. 50(3): 885-900 2007 American Society of Agricultural and Biological Engineers ISSN 0001-2351 885  

E-Print Network [OSTI]

Engineer, Environmental Science Specialist, Water Quality Planning Bureau, Montana Department of Envi- ronmental Quality, Helena, Montana; Ronald L. Bingner, ASABE Mem- ber Engineer, Agricultural Engineer, USDA Engineers ISSN 0001-2351 885 MODEL EVALUATION GUIDELINES FOR SYSTEMATIC QUANTIFICATION OF ACCURACY

137

Use of Computational Intelligence in Illumination Systems Searching Energetic Efficiency  

E-Print Network [OSTI]

To foment the study of methodologies to project and control efficient illumination systems, aiming at the reduction of energy consumption and optimal performance of illumination systems. Applying artificial neural networks to determine the luminance...

Silva, I.; Tostes, M. E.; Silva, R.

2007-01-01T23:59:59.000Z

138

Sandia National Laboratories: Four-color laser white illuminant...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ClimateECNews & EventsNewsFour-color laser white illuminant demonstrating high color-rendering quality Four-color laser white illuminant demonstrating high color-rendering quality...

139

Illuminating the Importance of Big Data | GE Global Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Illuminating the Importance of Big Data Illuminating the Importance of Big Data Kareem Aggour 2012.07.12 Electricity-it's something we usually take for granted. Whether it's...

140

Structure Illuminates Mechanism of Fungal Polyketide Cyclization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Structure Illuminates Mechanism Structure Illuminates Mechanism of Fungal Polyketide Cyclization Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Wednesday, 31 March 2010 00:00 Polyketide natural products produced by bacteria and fungi are often characterized by the presence of multiple aromatic rings that are responsible for the activity of polyketides as both beneficial antibiotic and anticancer agents and as dangerous toxic compounds, such as the highly carcinogenic aflatoxins that are produced by fungal species from the Aspergillus family of molds. Polyketide ring formation by fungal enzymes called polyketide synthases (PKSs) is mediated by the enzyme's product template (PT) domain. However, the mechanism for aromatic ring formation from a linear intermediate with high fidelity has remained unclear. To reveal the cyclization mechanism, researchers at the University of California, Irvine, and The Johns Hopkins University solved the structure of the isolated PT domain of the PKS involved in aflatoxin production (PksA) to 1.8 Å using data from ALS Beamline 8.2.2 and SSRL Beamline 9-1. The crystal structure, along with biochemical studies, provides a paradigm for polyketide cyclization by fungal PKSs, an event that is necessary for imparting biological activity to this large class of clinically relevant natural products.

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Engineering  

Science Journals Connector (OSTI)

... and, as a result, connected information regarding the use of indicators on internal combustion engines is not readily obtainable. The author, who designed that most useful instrument, the ... in the manipulation of these instruments. His survey is limited to the combined piston, spring and pencil-lever types, and traces their development from the original instrument devised by ...

1939-03-11T23:59:59.000Z

142

Engineering Engineering  

E-Print Network [OSTI]

Engineering Engineering Technology & A T P E N N S T A T E 2 0 1 0 ­ 2 0 1 1 #12;2 Join us at penn state! Since 1896, Penn State has been a leader in engineering and engineering technology education varieties of engineering and engineering technology majors found anywhere in the United States. This means

Maroncelli, Mark

143

ELECTRICAL ENGINEERING AT McGILL Bachelor of Engineering in Electrical Engineering  

E-Print Network [OSTI]

ELECTRICAL ENGINEERING AT McGILL Bachelor of Engineering in Electrical Engineering What is electrical engineering? Our society is powered by electricity and electrical engineering can be found at the core of the rapidly evolving high-tech industry. Electrical engineers design, build, test

Barthelat, Francois

144

Organic light emitting devices for illumination  

DOE Patents [OSTI]

An organic light emitting device is provided. The device has a plurality of regions, each region having an organic emissive layer adapted to emit a different spectrum of light. The regions in combination emit light suitable for illumination purposes. The area of each region may be selected such that the device is more efficient that an otherwise equivalent device having regions of equal size. The regions may have an aspect ratio of at least about four. All parts of any given region may be driven at the same current.

Hack, Michael (Lambertville, NJ); Lu, Min-Hao Michael (Lawrenceville, NJ); Weaver, Michael S. (Princeton, NJ)

2010-02-16T23:59:59.000Z

145

Structure Illuminates Mechanism of Fungal Polyketide Cyclization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Polyketide natural products produced by bacteria and fungi are often characterized by the presence of multiple aromatic rings that are responsible for the activity of polyketides as both beneficial antibiotic and anticancer agents and as dangerous toxic compounds, such as the highly carcinogenic aflatoxins that are produced by fungal species from the Aspergillus family of molds. Polyketide ring formation by fungal enzymes called polyketide synthases (PKSs) is mediated by the enzyme's product template (PT) domain. However, the mechanism for aromatic ring formation from a linear intermediate with high fidelity has remained unclear. To reveal the cyclization mechanism, researchers at the University of California, Irvine, and The Johns Hopkins University solved the structure of the isolated PT domain of the PKS involved in aflatoxin production (PksA) to 1.8 Å using data from ALS Beamline 8.2.2 and SSRL Beamline 9-1. The crystal structure, along with biochemical studies, provides a paradigm for polyketide cyclization by fungal PKSs, an event that is necessary for imparting biological activity to this large class of clinically relevant natural products.

146

Structure Illuminates Mechanism of Fungal Polyketide Cyclization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Structure Illuminates Mechanism of Fungal Polyketide Cyclization Print Polyketide natural products produced by bacteria and fungi are often characterized by the presence of multiple aromatic rings that are responsible for the activity of polyketides as both beneficial antibiotic and anticancer agents and as dangerous toxic compounds, such as the highly carcinogenic aflatoxins that are produced by fungal species from the Aspergillus family of molds. Polyketide ring formation by fungal enzymes called polyketide synthases (PKSs) is mediated by the enzyme's product template (PT) domain. However, the mechanism for aromatic ring formation from a linear intermediate with high fidelity has remained unclear. To reveal the cyclization mechanism, researchers at the University of California, Irvine, and The Johns Hopkins University solved the structure of the isolated PT domain of the PKS involved in aflatoxin production (PksA) to 1.8 Å using data from ALS Beamline 8.2.2 and SSRL Beamline 9-1. The crystal structure, along with biochemical studies, provides a paradigm for polyketide cyclization by fungal PKSs, an event that is necessary for imparting biological activity to this large class of clinically relevant natural products.

147

Quantum Illumination at the Microwave Wavelengths  

E-Print Network [OSTI]

Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally-occurring bright thermal background in the microwave regime. We use an electro-optomechanical converter to entangle microwave signal and optical idler fields, with the former being sent to probe the target region and the latter being retained at the source. The microwave radiation collected from the target region is then phase conjugated and upconverted into an optical field that is combined with the retained idler in a joint-detection quantum measurement. The error probability of this microwave quantum-illumination system, or quantum radar, is shown to be superior to that of any classical microwave radar of equal transmitted energy.

Shabir Barzanjeh; Saikat Guha; Christian Weedbrook; David Vitali; Jeffrey H. Shapiro; Stefano Pirandola

2015-01-31T23:59:59.000Z

148

High Efficiency, Illumination Quality OLEDs for Lighting  

SciTech Connect (OSTI)

The goal of the program was to demonstrate a 45 lumen per watt white light device based upon the use of multiple emission colors through the use of solution processing. This performance level is a dramatic extension of the team's previous 15 LPW large area illumination device. The fundamental material system was based upon commercial polymer materials. The team was largely able to achieve these goals, and was able to deliver to DOE a 90 lumen illumination source that had an average performance of 34 LPW a 1000 cd/m{sup 2} with peak performances near 40LPW. The average color temperature is 3200K and the calculated CRI 85. The device operated at a brightness of approximately 1000cd/m{sup 2}. The use of multiple emission colors particularly red and blue, provided additional degrees of design flexibility in achieving white light, but also required the use of a multilayered structure to separate the different recombination zones and prevent interconversion of blue emission to red emission. The use of commercial materials had the advantage that improvements by the chemical manufacturers in charge transport efficiency, operating life and material purity could be rapidly incorporated without the expenditure of additional effort. The program was designed to take maximum advantage of the known characteristics of these material and proceeded in seven steps. (1) Identify the most promising materials, (2) assemble them into multi-layer structures to control excitation and transport within the OLED, (3) identify materials development needs that would optimize performance within multilayer structures, (4) build a prototype that demonstrates the potential entitlement of the novel multilayer OLED architecture (5) integrate all of the developments to find the single best materials set to implement the novel multilayer architecture, (6) further optimize the best materials set, (7) make a large area high illumination quality white OLED. A photo of the final deliverable is shown. In 2003, a large area, OLED based illumination source was demonstrated that could provide light with a quality, quantity, and efficiency on par with what can be achieved with traditional light sources. The demonstration source was made by tiling together 16 separate 6-inch x 6-inch blue-emitting OLEDs. The efficiency, total lumen output, and lifetime of the OLED based illumination source were the same as what would be achieved with an 80 watt incandescent bulb. The devices had an average efficacy of 15 LPW and used solution-processed OLEDs. The individual 6-inch x 6-inch devices incorporated three technology strategies developed specifically for OLED lighting -- downconversion for white light generation, scattering for outcoupling efficiency enhancement, and a scalable monolithic series architecture to enable large area devices. The downconversion approach consists of optically coupling a blue-emitting OLED to a set of luminescent layers. The layers are chosen to absorb the blue OLED emission and then luminescence with high efficiency at longer wavelengths. The composition and number of layers are chosen so that the unabsorbed blue emission and the longer wavelength re-emission combine to make white light. A downconversion approach has the advantage of allowing a wide variety of colors to be made from a limited set of blue emitters. In addition, one does not have to carefully tune the emission wavelength of the individual electro-luminescent species within the OLED device in order to achieve white light. The downconversion architecture used to develop the 15LPW large area light source consisted of a polymer-based blue-emitting OLED and three downconversion layers. Two of the layers utilized perylene based dyes from BASF AG of Germany with high quantum efficiency (>98%) and one of the layers consisted of inorganic phosphor particles (Y(Gd)AG:Ce) with a quantum efficiency of {approx}85%. By independently varying the optical density of the downconversion layers, the overall emission spectrum could be adjusted to maximize performance for lighting (e.g. blackbody temp

Joseph Shiang; James Cella; Kelly Chichak; Anil Duggal; Kevin Janora; Chris Heller; Gautam Parthasarathy; Jeffery Youmans; Joseph Shiang

2008-03-31T23:59:59.000Z

149

X-rays Illuminate Ancient Archimedes Text  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Related Links: Related Links: May 2005 Headlines TIP Article Press Release Walters Art Museum SSRL Home Page SLAC Home Page Stanford Home Page Tuesday, 31 May 2005 X-rays Illuminate Ancient Archimedes Text (contact: Uwe Bergmann, bergmann@slac.stanford.edu) Archimedes Figure Image provided by Will Noel, The Walters Art Museum An early transcription of Archimedes' mathematical theories has been brought to light through the probing of high-intensity x-rays at SSRL's BL6-2. The text contains part of the Method of Mechanical Theorems, one of Archimedes' most important works, which was probably copied out by a scribe in the tenth century. The parchment on which it was written was later scraped down and reused as pages in a twelfth century prayer book, producing a document known as a palimpsest (which comes from the Greek,

150

Sandia National Laboratories: AIAA SciTech/American Society of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AIAA SciTechAmerican Society of Mechanical Engineers Wind Energy Symposium National Rotor Testbed Functional Scaling Presented at American Institute of Aeronautics and...

151

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

Sylvain Marchand1 , Roland Badeau2 , Cl´eo Baras3 , Laurent Daudet4 , Dominique Fourer5 , Laurent Girin3 should be addressed to Sylvain Marchand (Sylvain.Marchand@univ-brest.fr) ABSTRACT Active listening such as general- #12;Marchand et al. DReaM: a novel system for joint source separation and multi-track coding ized

Badeau, Roland

152

Audio Engineering Society Convention Paper  

E-Print Network [OSTI]

& Experimental Stability of SDMs AES 124th Convention, Amsterdam, The Netherlands, 2008 May 17­20 Page 2 of 15­20 Amsterdam, The Netherlands The papers at this Convention have been selected on the basis of a submitted

Reiss, Josh

153

Optimization Journals, Sites, Societies  

E-Print Network [OSTI]

Optimization Online Links. Optimization related societies. Mathematical Optimization Society SIAM INFORMS. Optimization related journals. Mathematical...

154

SPOTLIGHT on: Ellen Messer Biomedical (Mechanical) Engineering  

E-Print Network [OSTI]

SPOTLIGHT on: Ellen Messer Biomedical (Mechanical) Engineering Undergraduate Hometown: Easthampton of Biomedical Engineering, Undergraduate Research Assistant Program at the Brain and Creativity Institute, MA Involvement at USC: USC Marathon Team, Society of Women Engineers, Associated Students

Wang, Hai

155

New dean reflects on Gator Engineering  

E-Print Network [OSTI]

UF Voices New dean reflects on Gator Engineering No engineer is an island. The most suc- cessful questions facing society. It's an exciting time to be a new dean of engineering -- especially Gator

Pilyugin, Sergei S.

156

Mechanical & Aerospace Engineering  

E-Print Network [OSTI]

, and nuclear energy. She is a member of the American Society of Mechanical Engineers (ASME), Fluids EngineeringMechanical & Aerospace Engineering Interfacial flows are multi-material flows comprised of two of the interface between the fluids and the interface physics (like surface tension) needs to be predicted as part

157

Illumination Invariant Face Recognition Using Near-Infrared Images  

E-Print Network [OSTI]

Illumination Invariant Face Recognition Using Near-Infrared Images Stan Z. Li, Senior Member, IEEE-user applications. First, we present an active near infrared (NIR) imaging system that is able to produce face groups. Index Terms--Biometrics, face recognition, near infrared (NIR), illumination invariant, local

Fan, Guoliang

158

Faculty of Engineering Bachelor of Applied Science  

E-Print Network [OSTI]

and Environmental Engineering; Electrical Engineering; Industrial Engineering and Mechanical, Automotive & MaterialsFaculty of Engineering Bachelor of Applied Science in Engineering The demands on professional engineers around the world are increasing in terms of what they must address: our society must confront

159

College of Engineering Profile The College of Engineering at Colorado  

E-Print Network [OSTI]

College of Engineering Profile 2007-2008 The College of Engineering at Colorado State has a strong tradition of excellence in science and engineering. The vision of the College of Engineering services, and outreach. We will serve society by solving problems of global importance and through

160

Evaluation of expanded uncertainties in luminous intensity and illuminance calibrations  

SciTech Connect (OSTI)

Detector-based calibrating methods and expressions for calculation of photometric uncertainties related to uncertainties in the calibrations of luminous intensity of a light source, illuminance responsivity of a photometer head, and calibration factors of an illuminance meter are discussed. These methods permit luminous intensity calibrations of incandescent light sources, luminous responsivity calibrations of photometer heads, and calibration factors of illuminance meters to be carried out with relative expanded uncertainties (with a level of confidence of 95.45%) of 0.4%, 0.4%, and 0.6%, respectively.

Sametoglu, Ferhat

2008-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Transactions of the ASABE Vol. 53(5): 1605-1617 2010 American Society of Agricultural and Biological Engineers ISSN 2151-0032 1605  

E-Print Network [OSTI]

and Biological Engineers ISSN 2151-0032 1605 A COMPREHENSIVE MODELING APPROACH FOR RESERVOIR WATER QUALITY; Steven T. Bednarz, ASABE Member, Civil Engineer, USDANRCS, Temple, Texas; Mark R. Ernst, Water Quality in formulating a watershed management plan to improve the water quality of Cedar Creek reservoir, one of five

162

18th Annual International Conference of the IEEE Engineering in MIedicineand BiollogySociety, Amsterdam 1996 3.3.1: MR Imaging Systems and Reconstruction Techniques  

E-Print Network [OSTI]

Society, Amsterdam 1996 3.3.1: MR Imaging Systems and Reconstruction Techniques MEASURINGAC MAGNETIC FIELD is given in Fig.1. In the absence of an applied AC current, this pulse sequence is the same asthe one used by Maudsley A.A. et.al. to calculate the DC magnetic field inhomo se RP .,A_ II I f 0Gz I " v - who & - Fig.1

Ider, Yusuf Ziya

163

United Illuminating - ZREC and LREC Long Term Contracts (Connecticut) |  

Broader source: Energy.gov (indexed) [DOE]

United Illuminating - ZREC and LREC Long Term Contracts United Illuminating - ZREC and LREC Long Term Contracts (Connecticut) United Illuminating - ZREC and LREC Long Term Contracts (Connecticut) < Back Eligibility Agricultural Commercial Construction Fed. Government Industrial Installer/Contractor Institutional Local Government Low-Income Residential Multi-Family Residential Nonprofit Schools State Government Tribal Government Savings Category Bioenergy Alternative Fuel Vehicles Hydrogen & Fuel Cells Solar Buying & Making Electricity Wind Maximum Rebate $325.50 per ZREC; $200 per LREC Program Info Funding Source RPS Start Date 05/01/2012 State Connecticut Program Type Performance-Based Incentive Provider The United Illuminating Company Note: The deadline for the second request for proposals (RFP) under this program is June 13, 2013.

164

The United Illuminating Company - Small ZREC Tariff | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

The United Illuminating Company - Small ZREC Tariff The United Illuminating Company - Small ZREC Tariff The United Illuminating Company - Small ZREC Tariff < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Low-Income Residential Multi-Family Residential Nonprofit Residential Schools State Government Tribal Government Savings Category Water Buying & Making Electricity Solar Home Weatherization Wind Program Info Funding Source RPS Start Date 01/08/2013 State Connecticut Program Type Performance-Based Incentive Rebate Amount $148.89 per ZREC Provider The United Illuminating Company Note: The 2013 application period has closed. In July 2011, Connecticut enacted legislation amending the state's [http://www.dsireusa.org/incentives/incentive.cfm?Incentive_Code=CT04R&re...

165

Critical illumination condenser for x-ray lithography  

DOE Patents [OSTI]

A critical illumination condenser system is disclosed, particularly adapted for use in extreme ultraviolet (EUV) projection lithography based on a ring field imaging system and a laser produced plasma source. The system uses three spherical mirrors and is capable of illuminating the extent of the mask plane by scanning either the primary mirror or the laser plasma source. The angles of radiation incident upon each mirror of the critical illumination condenser vary by less than eight (8) degrees. For example, the imaging system in which the critical illumination condenser is utilized has a 200 {micro}m source and requires a magnification of 26. The three spherical mirror system constitutes a two mirror inverse Cassegrain, or Schwarzschild configuration, with a 25% area obstruction (50% linear obstruction). The third mirror provides the final pupil and image relay. The mirrors include a multilayer reflective coating which is reflective over a narrow bandwidth. 6 figs.

Cohen, S.J.; Seppala, L.G.

1998-04-07T23:59:59.000Z

166

Lensless digital holographic microscope with light-emitting diode illumination  

Science Journals Connector (OSTI)

We demonstrate the operation of a digital in-line microscope with LED illumination. We show with a practical example that, for typical setups, the limited temporal coherence and the...

Repetto, L; Piano, E; Pontiggia, C

2004-01-01T23:59:59.000Z

167

Light-emitting diode illumination design with a condensing sphere  

Science Journals Connector (OSTI)

An illumination system is described that comprises a glass or plastic sphere, an embedded light-emitting diode (LED) source, and a reflecting or scattering mirror. The rays from the...

Chi, Wanli; George, Nicholas

2006-01-01T23:59:59.000Z

168

Sunlight and LED Hybrid Illumination in Indoor Lighting Design  

Science Journals Connector (OSTI)

We design a light integrating collector that can collect the sunlight and LED light to illuminate the indoor spaces uniformly, and then use in simulating the sunlight/LED hybrid...

Sun, Wen-Shing; Tsuei, Chih-Hsuan

169

The Magazine of the Penn State College of Engineering Fall 2005 Engineering  

E-Print Network [OSTI]

,wasnamedpresidentoftheAcous- tical Society of America and will serve a one-year term. Yousry Azmy, professor of nuclear engineeringFall 2005 P e n n S t a t e The Magazine of the Penn State College of Engineering Fall 2005 Engineering EnginEEring and the Economy #12; Engineering Penn State Anthony Atchley, Acoustics Program chair

Yener, Aylin

170

A Photon Mapping Based Approach to Computing Celestial Illumination  

E-Print Network [OSTI]

A PHOTON MAPPING BASED APPROACH TO COMPUTING CELESTIAL ILLUMINATION A Thesis by JONATHAN PENNEY Submitted to the O ce of Graduate Studies of Texas A&M University in partial ful llment of the requirements for the degree of MASTER OF SCIENCE May 2009... Major Subject: Visualization Sciences A PHOTON MAPPING BASED APPROACH TO COMPUTING CELESTIAL ILLUMINATION A Thesis by JONATHAN PENNEY Submitted to the O ce of Graduate Studies of Texas A&M University in partial ful llment of the requirements...

Penney, Jonathan

2010-07-14T23:59:59.000Z

171

Pilot Study: Measurement of Room Illuminance to Assess Automatic Brightness  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Study: Measurement of Room Illuminance to Assess Automatic Brightness Study: Measurement of Room Illuminance to Assess Automatic Brightness Control in Televisions Title Pilot Study: Measurement of Room Illuminance to Assess Automatic Brightness Control in Televisions Publication Type Conference Proceedings Year of Publication 2012 Authors Greenblatt, Jeffery B., Mia Forbes Pirie, Louis-Benoit Desroches, Sally M. Donovan, Clancy Donnelly, Craig Billingsley, and Chris Calwell Pagination 13 Date Published August 12 Conference Location Berkeley Abstract Automatic brightness control (ABC) is an increasingly common feature found in newtelevisions (TVs) and computer monitors. ABC is intended to adjust TV screen brightness(luminance) according to the ambient light level (room illuminance). When implementedcorrectly, this can both reduce energy consumption and improve viewing quality. The currentENERGY STAR test procedure provides for a more favorable energy use rating for TVs withABC, by measuring power consumption at two light levels (0 and 300 lux) and reporting aweighted-average energy use. However, this and other studies suggest that these levels are notrepresentative of actual TV viewing conditions.As there were currently only limited data available concerning room illuminance, weundertook a small pilot study in 2011 to begin to answer two key questions: 1. To what extent doroom illuminance levels vary depending on the location of measurement (e.g., center of theroom, on the couch, or at the TV)? 2. What room illuminance conditions are prevalent whenpeople watch TV?We measured room illuminance in the homes of nine volunteers in California andColorado to begin addressing the above two questions. Although the study had the usualdrawbacks of a pilot (limited sample size, time duration, etc.), it has, nonetheless, yielded usefulresults. The study shows definitively that there is large variability between measurements madeat different locations in the room and, therefore, that location of room illuminance measurementsis critical. Moreover, the majority (over 75%) of TV viewing occurred at illuminance levels ofless than 50 lux (though measurements of up to several hundred lux were also recorded), a resultthat was consistent with subsequent larger-scale studies. This type of information can helpdetermine how ABC-enabled TVs should be tested to best represent actual viewing conditions.

172

SOCIETY NEWS:  

Science Journals Connector (OSTI)

......13 January 2000 (offices re-open on 4 January 2000). Input for Society News Information for these pages should be sent...Guyenne T D and Hunt J J (eds) Plasma Physics and Controlled Nuclear Fusion, QB 462, European Space Agency, 1993, ISBN 92 9092 246......

From the Council of the RAS; Burlington House

1999-10-01T23:59:59.000Z

173

SOCIETY NEWS:  

Science Journals Connector (OSTI)

......Chester, with the Apollo Moon landings and Patrick Moore giving a public...variable stars. The infa- mous comet Kohoutek started my specialization in the observation of comets. I followed the degree with...Society for Popular Astronomy comet sec- tions. I was president......

New members of RAS Council

2004-02-01T23:59:59.000Z

174

graduate programs mechanical engineering  

E-Print Network [OSTI]

challenges facing society, through both research and the education of the next generation of engineers. We (international students only) Three letters of recommendation Resume or CV Statement of purpose Please note-Computer Interaction applied to: creativity, innovation, well-being, design engineering, exploration, gaming

Zhang, Junshan

175

SPOTLIGHT on: Jennifer Dowling Industrial and Systems Engineering  

E-Print Network [OSTI]

SPOTLIGHT on: Jennifer Dowling Industrial and Systems Engineering Hometown: La Mirada, CA Involvement at USC: Society of Women Engineers- Corporate Affairs Committee member, Institute of Industrial Engineers- President, Viterbi Graduate Admissions Office- student staff member, Song Girl 2007 Favorite

Wang, Hai

176

FACULTY OF ENGINEERING MODULE DESCRIPTION FORM  

E-Print Network [OSTI]

's ethical responsibility to the profession, society and the environment. Develop an understanding engineering (structures, water, geotechnics, management, environment etc). The profession & ICE, professional ethics and corporate social responsibility. Sustainability in an engineering context; recycling

Mottram, Nigel

177

Fonseca, F. and Martin, J. (2005) Toward an Alternative Notion of Information Systems Ontologies: Information Engineering as a Hermeneutic Enterprise. Journal of the American Society for Information  

E-Print Network [OSTI]

Fonseca, F. and Martin, J. (2005) Toward an Alternative Notion of Information Systems Ontologies, conceptual domains has become a kind of Holy Grail for many information systems engineers. In Ontology (2003a for #12;Fonseca, F. and Martin, J. (2005) Toward an Alternative Notion of Information Systems Ontologies

Petrick, Irene J.

178

Society of Automotive Engineers (SAE) Technical Paper 2006-01-1041 Paper presented at SAE 2006 World Congress & Exposition, April 5, 2006, Detroit, MI  

E-Print Network [OSTI]

injection (GDI) has been the subject of research and development for a long time in the automotive industry. In a combustion system employing GDI, the fuel is injected directly into the combustion chamber instead of the air injector plays a key role in the performance of GDI engines. Compared to the conventional port fuel

Gruner, Sol M.

179

,/: : A THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS 87-WA/AES-4 ! .,~,'~(345 E. 47 St., New York, N.Y. 10017 .,. *  

E-Print Network [OSTI]

, evaporator, condenser, and expansion valve) fuel usage reductions were 19% and 17%, respectively. remain. NOMENCLATURE C coefficient of performance oRNL-oDS 6-7998 f engine energy fraction COO, , . . _*'COOLING L), respectively, calculated coefficients of performance were 0.3 for the cooling mode (Ce) and 1.3 for the heating

Oak Ridge National Laboratory

180

Novel green illumination energy for LED with ocean battery materials  

Science Journals Connector (OSTI)

This paper launches novel materials of LED with ocean battery. Ocean battery employs sea water existing by the nature as energy materials to drive LED lamp lighting. The analysing methods are thermal-, electric- and illumination-performance experiments to discuss the novel green illumination techniques. Ocean battery and LED are all DC components, there is no energy loss of current converter between them, and the ocean battery has more electricity in LED illumination. Vapour chamber (VC) and aluminium (AL) materials are assigned to be the LED PCBs. Results show that the effective thermal conductivity of the VCPCB is many times higher than that of the ALPCB, proving that it can effectively reduce the temperature of the LED and obtain more uniform luminance. And the output voltage and LED lighting start unstable resulting from the air bubble of ocean battery slight vibration.

Jung-Chang Wang

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Critical illumination condenser for extreme ultraviolet projection lithography  

SciTech Connect (OSTI)

A condenser system couples a radiation source to an imaging system. The authors have designed a critical illumination condenser system which meets the technical challenges of extreme ultraviolet projection lithography based on a ring field imaging system and a laser produced plasma source. The optical system, a three spherical mirror optical design, is capable of illuminating the extent of the mask plane by scanning either the primary mirror or the laser plasma source. This type of condenser optical design is sufficiently versatile to be employed with two distinct systems, one from Lawrence Livermore National Laboratory and one from AT and T/Sandia.

Cohen, S.J.; Seppala, L.G.

1995-03-02T23:59:59.000Z

182

Characterisation of pulsed Carbon fiber illuminators for FIR instrument calibration  

E-Print Network [OSTI]

We manufactured pulsed illuminators emitting in the far infrared for the Planck-HFI bolometric instrument ground calibrations. Specific measurements have been conducted on these light sources, based on Carbon fibers, to understand and predict their properties. We present a modelisation of the temperature dependence of the thermal conductivity and the calorific capacitance of the fibers. A comparison between simulations and bolometer data is given, that shows the coherence of our model. Their small time constants, their stability and their emission spectrum pointing in the submm range make these illuminators a very usefull tool for calibrating FIR instruments.

S. Henrot-Versille; R. Cizeron; F. Couchot

2007-07-31T23:59:59.000Z

183

Characterisation of pulsed Carbon fiber illuminators for FIR instrument calibration  

E-Print Network [OSTI]

We manufactured pulsed illuminators emitting in the far infrared for the Planck-HFI bolometric instrument ground calibrations. Specific measurements have been conducted on these light sources, based on Carbon fibers, to understand and predict their properties. We present a modelisation of the temperature dependence of the thermal conductivity and the calorific capacitance of the fibers. A comparison between simulations and bolometer data is given, that shows the coherence of our model. Their small time constants, their stability and their emission spectrum pointing in the submm range make these illuminators a very usefull tool for calibrating FIR instruments.

Henrot-Versill, S; Couchot, F

2007-01-01T23:59:59.000Z

184

Ant Societies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Societies Societies Nature Bulletin No. 518-A February 23, 1974 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation ANT SOCIETIES That first small crater-like ring of soil granules heaped up around a crack in the sidewalk is a sign of spring. Hesitate there a moment -- children always do -- and you'll see several Little Black Ants hurrying in and out, bringing up particles of earth from below as they enlarge their underground home. At another time you may see columns of them in an ant safari with two-way traffic as they cross a lawn or invade a kitchen to forage for food. All ants live in colonies. Ants are called social insects because within each colony there is a division of labor with males, females and one or more castes of workers each performing certain tasks for the benefit of the whole group. A single colony may vary in size from a few dozen individuals up to millions. Some naturalists suppose that ants are more numerous than any other type of land animal others think that plant lice outnumber them.

185

E-Print Network 3.0 - american physical society Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: of the Optical Society of America A Journal of Physics A: Math General Optical Engineering Physics of Fluids... of Dynamic Systems Bulletin of the American Mathematical...

186

Democratizing Search? From Critique to Society-oriented Bernhard Rieder  

E-Print Network [OSTI]

Engineers at the Digital Equipment Company introduced AltaVista, the first large scale search engine distinguish between Google search (http://www.google.com) a Web search engine and Google Inc., the companyDemocratizing Search? From Critique to Society-oriented Design. Bernhard Rieder Since 1995, when

Paris-Sud XI, Université de

187

Electron-ion collisions in intensely illuminated plasmas G. Shvetsa)  

E-Print Network [OSTI]

Electron-ion collisions in intensely illuminated plasmas G. Shvetsa) and N. J. Fisch Princeton, the collisions of electrons with ions can be made more frequent or less frequent, depending on the polarization to the size of the electron oscillation in the hf field. The stimulated bremsstrahlung emission is calculated

188

Observation of objects under intense plasma background illumination  

SciTech Connect (OSTI)

Experiments on the observation of a brightness-amplified image of an object through a masking arc discharge are presented. The copper-vapor laser active medium was used as an image brightness amplifier. It is shown that the image quality does not worsen under plasma background illumination.

Buzhinsky, R. O.; Savransky, V. V. [Russian Academy of Sciences, Natural Science Center, Prokhorov Institute of General Physics (Russian Federation); Zemskov, K. I.; Isaev, A. A. [Russian Academy of Sciences, Lebedev Physical Institute (Russian Federation); Buzhinsky, O. I. [Troitsk Institute for Innovation and Fusion Research (Russian Federation)

2010-12-15T23:59:59.000Z

189

Efficient Re-rendering of Naturally Illuminated Environments?  

E-Print Network [OSTI]

]) with global illumination algorithms [15, 22]. A major difficulty with modeling daylight is that the direction solution at each of a large number of time steps corresponding to a sequence of sun directions. Furthermore solutions. Rather than computing a global solution for each time step, we describe a technique for computing

Simoncelli, Eero

190

Illumination Problems on Translation Surfaces with Planar Infinities  

E-Print Network [OSTI]

Problems August 10th, 2011 7 / 43 #12;Construction Continued Step 2. Generate the group G = 1, 2 August 10th, 2011 8 / 43 #12;Construction Continued Step 2. Generate the group G = 1, 2 of reflections / 43 #12;Set up Illumination problems in planar domains with polygonal boundary are popular and simple

Dimitrov, Nikolay

191

Apparatus and method for generating partially coherent illumination for photolithography  

DOE Patents [OSTI]

The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system comprises a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media.

Sweatt, William C. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

192

STANFORD UNIVERSITY SCHOOL OF ENGINEERING  

E-Print Network [OSTI]

minimum) Engineering Fundamentals (13 units minimum required) CS 106 Programming Abstract (A and B, or X) 5 ENGR 40 Introductory Electronics 5 Elective (see note 2) Fundamentals Total (13 units minimum) Technology in Society (1 course required, 3-5 units, see list in Technology in Society section of Handbook

Pratt, Vaughan

193

Mechanical Engineering Department Multi-scale optical metrology and  

E-Print Network [OSTI]

Reference beam Illumination beam Digital holography: high-speed measurements Recording #12;Mechanical #12;Mechanical Engineering Department Measuring the complex light field with intensity and phase length Measuring the complex light field with intensity and phase sampling Lensless digital holography

Furlong, Cosme

194

Combined Illumination Cylindrical Millimeter-Wave Imaging Technique for Concealed Weapon Detection  

SciTech Connect (OSTI)

A novel millimeter-wave imaging technique has been developed for personnel surveillance applications, including the detection of concealed weapons, explosives, drugs, and other contraband material. Millimeter-waves are high-frequency radio waves in the frequency band of 30-300 GHz, and pose no health threat to humans at moderate power levels. These waves readily penetrate common clothing materials, and are reflected by the human body and by concealed items. The combined illumination cylindrical imaging concept consists of a vertical, high-resolution, millimeter-wave array of antennas which is scanned in a cylindrical manner about the person under surveillance. Using a computer, the data from this scan is mathematically reconstructed into a series of focused 3-D images of the person. After reconstruction, the images are combined into a single high-resolution three-dimensional image of the person under surveillance. This combined image is then rendered using 3-D computer graphics techniques. The combined cylindrical illumination is critical as it allows the display of information from all angles. This is necessary because millimeter-waves do not penetrate the body. Ultimately, the images displayed to the operator will be icon-based to protect the privacy of the person being screened. Novel aspects of this technique include the cylindrical scanning concept and the image reconstruction algorithm, which was developed specifically for this imaging system. An engineering prototype based on this cylindrical imaging technique has been fabricated and tested. This work has been sponsored by the Federal Aviation Administration (FAA).

Sheen, David M.; McMakin, Douglas L.; Hall, Thomas E.

2000-04-01T23:59:59.000Z

195

Apparatus and method for generating partially coherent illumination for photolithography  

DOE Patents [OSTI]

The present invention relates an apparatus and method for creating a bright, uniform source of partially coherent radiation for illuminating a pattern, in order to replicate an image of said pattern with a high degree of acuity. The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system includes a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media. 7 figs.

Sweatt, W.C.

1999-07-06T23:59:59.000Z

196

Apparatus and method for generating partially coherent illumination for photolithography  

DOE Patents [OSTI]

The present invention relates an apparatus and method for creating a bright, uniform source of partially coherent radiation for illuminating a pattern, in order to replicate an image of said pattern with a high degree of acuity. The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system includes a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media.

Sweatt, William C. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

197

History of the Division of Industrial and Engineering Chemistry  

Science Journals Connector (OSTI)

History of the Division of Industrial and Engineering Chemistry ... When the SOCIETY met in December of that year, the committee reported to the Industrial Chemistry Section its recommendation that a journal of industrial and engineering chemistry be established and that the SOCIETY organize a division of industrial chemists and chemical engineers. ...

E. M . BILLINGS; HOWARD S. GARDNER

1940-12-10T23:59:59.000Z

198

Civil Society Must Publish Standards Documents Roger Clarke  

E-Print Network [OSTI]

society institutions to harness their resources to good effect. A very large proportion of the energies international contexts, such as the association of Institute of Electrical and Electronics Engineers (IEEE.clarke@xamax.com.au Abstract. A great deal of energy is wasted by civil society anguishing over the harm done to people

Boyer, Edmond

199

Rectangular illumination using a secondary optics with cylindrical lens for LED street light  

Science Journals Connector (OSTI)

The illumination pattern of an LED street light is required to have a rectangular distribution at a divergence-angle ratio of 7:3 for economical illumination. Hence, research supplying...

Chen, Hsi-Chao; Lin, Jun-Yu; Chiu, Hsuan-Yi

2013-01-01T23:59:59.000Z

200

Driver tension responses generated by various levels of intersection illumination  

E-Print Network [OSTI]

the pavement at the locations shown in Figure l. Each luminaire has an individual =-witch, With this arrangement numerous lighting patterns can be developed . . 5 / E POP PBH I TP- 24' STUDY SITE LIMITS pl TO GALVESTON ~ EP RO P GA LEGEND... feet beyond the last luminaire in each direction. It was believed that within these lbnits all reactions attributable to illumination would occur. Secondly, for a good comparison, similar paths were assigned the same total distance. The study limits...

Franklin, Weldon Clifford

1962-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Energy Savings Potential of Solid-State Lighting in General Illumination Applications- Report  

Broader source: Energy.gov [DOE]

A U.S. DOE SSL report on Energy Savings Potential of Solid-State Lighting in General Illumination Applications.

202

E-Print Network 3.0 - alternative ambient illumination Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technologies and Information Sciences 6 Painting surface characteristics Pierre Poulin Alain Fournier Summary: illumination model using ambient, diffuse and specular...

203

Engineering Electrical &  

E-Print Network [OSTI]

Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2012 Eight Required Courses Chart: 120 points College

Hickman, Mark

204

Engineering Electrical &  

E-Print Network [OSTI]

Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2011 Eight Required Courses Chart: 120 points College

Hickman, Mark

205

SHAPE AND POSE RECOVERY OF SOLAR-ILLUMINATED SURFACES FROM COMPRESSIVE SPECTRAL-POLARIMETRIC IMAGE DATA  

E-Print Network [OSTI]

SHAPE AND POSE RECOVERY OF SOLAR-ILLUMINATED SURFACES FROM COMPRESSIVE SPECTRAL-POLARIMETRIC IMAGE-polarimetric spatial im- age data from a solar-illuminated reflecting surface to recover its material signature, three, segmentation, and composition. For example, a typical solar-illuminated man-made satellite consists

Plemmons, Robert J.

206

Albert Macrander named American Physical Society Fellow  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Michael Borland named American Physical Society Fellow Michael Borland named American Physical Society Fellow Grad student is officially a GEMS NIU physicist Susan Mini lands NSF grant for APS beamline upgrades Argonne's Campuzano Honored by Hispanic Engineering Bugs in the News APS News Archives: 2012 | 2011 | 2010 | 2009 2008 | 2007 | 2006 | 2005 2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed Albert Macrander named American Physical Society Fellow DECEMBER 10, 2007 Bookmark and Share Albert Macrander Albert Macrander of the Argonne X-ray Science Division (XSD) has been elected a Fellow of the American Physical Society. The Fellowship citation is for "advancement of x-ray science, x-ray optics, and x-ray measurements on crystals and for his leadership as Editor of the Review of Scientific Instruments."

207

Engineering Engineering Education  

E-Print Network [OSTI]

E School of Engineering Engineering Education in a University Setting 292 Degree Programs in Engineering 294 Special Programs 296 Honors 298 Academic Regulations 300 Courses of Study 305 Engineering of Engineering is the largest and oldest private engineering school in the South. Classes offering engineering

Simaan, Nabil

208

American Chemical Society-Chinese Chemical Society Alliance  

Science Journals Connector (OSTI)

American Chemical Society-Chinese Chemical Society Alliance ... The American Chemical Society and the Chinese Chemical Society (CCS) formed a three-year collaborative alliance in 2010 to address shared global concerns. ...

MARINDA LI WU; YAO JIANNIAN

2013-01-07T23:59:59.000Z

209

STANFORD UNIVERSITY SCHOOL OF ENGINEERING  

E-Print Network [OSTI]

of "Courses Approved for the Engineering Fundamentals Requirement" in front of Handbook. 3 Students who take) Engineering Fundamentals (13 units minimum required) CS 106 Programming Abstract (A and B, or X) 5 ENGR 40 Introductory Electronics 5 Elective (see note 2) Fundamentals Total (13 units minimum) Technology in Society (1

Pratt, Vaughan

210

STANFORD UNIVERSITY SCHOOL OF ENGINEERING  

E-Print Network [OSTI]

, 3 to 5 units. See Engineering Fundamentals list earlier in Handbook. (4) The two systems electives) Engineering Fundamentals (13 units minimum required) CS 106 Programming Abstractions (B or X) 5 Engr 40 Introductory Electronics 5 Elective (see note 3) Fundamentals Total 10 (13 units minimum) Technology in Society

Pratt, Vaughan

211

STANFORD UNIVERSITY SCHOOL OF ENGINEERING  

E-Print Network [OSTI]

minimum) Engineering Fundamentals (13 units minimum required) CS 106 Programming Abstract (B or X) 5 ENGR 40 Introductory Electronics 5 Elective (see note 1) Fundamentals Total (13 units minimum) Technology in Society (1 course required, 3-5 units, see list in the School of Engineering Undergraduate Handbook

Pratt, Vaughan

212

Engineering Aerial view of  

E-Print Network [OSTI]

-neutral Torus 2 Climate Change 4 Combustion and Catalysis Laboratory #12;4 5 1Engineering Revolution 5 #12;6 7 in business, economics, law, design, media, and philosophy. It means gaining the tangible skills companies blueprint for a better world is a formula for leaders who are ready to solve society's most pressing needs

Shepard, Kenneth

213

Argonne Chemical Sciences & Engineering - 2005 Awards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 Awards 5 Awards 2005 Outstanding Engineering Achievement, Illinois Engineering Council, awarded to Argonne National Laboratory Chemical Engineering Division IBA Research Award, International Battery Materials Association, Christopher Johnson R&D 100 Award, Self-Contained Battery-Powered bion® Microstimulator with Rechargeable Miniature Battery, Khalil Amine, Ilias Belharouak, Bookeun Oh, Donald Vissers, Qingzheng Wang Electrochemical Society Battery Division Research Award, Electrochemical Society, Michael Thackeray Illinois Engineering Council Outstanding Engineering Achievement Award, UREX+ Process for Separating Key Radionuclides from Commercial Spent Fuel Innovation Hub Tribute to Innovative Minds, Michael Thackeray The University of Chicago Distinguished Performance Award, U of C, Julius Jellinek

214

The Founding Grant Society  

E-Print Network [OSTI]

The Founding Grant Society Honoring those extraordinary people who remember Stanford through it better, and that a legacy of education will serve them more than any other." From the Founding Grant Society Charter The Founding Grant Society Honoring those extraordinary people who remember Stanford

Prinz, Friedrich B.

215

Spectral-Based Illumination Estimation and Color Correction  

E-Print Network [OSTI]

address: Department of Information Technology, Lappeenranta University of Technology, P.O. Box 20, Fin-53851 Lappeenranta, Finland * Correspondence to: R. Lenz, Department of Science and Engineering, Campus

216

SRNL's Gupta Elected Fellow of American Society of Mechanical  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gupta Elected Fellow of Gupta Elected Fellow of American Society of Mechanical Engineers (ASME) AIKEN, S.C. (May 29, 2012) - Narendra K. Gupta, a principal engineer with the U.S. Department of Energy's Savannah River National Laboratory, was elected as a Fellow of ASME. Founded in 1880 as the American Society of Mechanical Engineers, ASME is a not-for-profit professional organization that enables collaboration, knowledge sharing and skill development across all engineering disci- plines. The grade of Fellow recognizes outstanding engineering achievement; the distinction has only been granted to approximately 3 percent of ASME's 102,000 members. Gupta is a Registered Professional Engineer with 37 years of design and analysis experience, including 22 years in the design and analysis of systems and

217

Electrical, Engineering  

E-Print Network [OSTI]

Sustainable Engineering ­ advance theory and practice of sustainable engineering; provide access to clean Engineering (Ron Askin) Computer Science Computer Systems Engineering Industrial Engineering Informatics and identification Engineering of Matter, Transport, and Energy (Kyle Squires) Aerospace Engineering Chemical

Zhang, Junshan

218

Canadian Society for Mechanical Engineering International Congress  

E-Print Network [OSTI]

& Innovation (UT-IMDI), CMC Microsystems, Flir, and Maplesoft. I hope enjoy your time at the congress. Jean W

219

Science and Society-Consequences of engineering  

ScienceCinema (OSTI)

Le confrencier Mons.Rorsch parle des possibles consquences conomiques et culturelles de la technologie en gnrale, aussi pour l'environnement

None

2011-04-25T23:59:59.000Z

220

SECTION MENGINEERING AND ASSOCIATED SOCIETIES  

Science Journals Connector (OSTI)

...considerable length anild muchieli diversfit-. The attendance was good, andl the interest was sustained to the end. Sir Clifford Sifton, for-merlv chairnman of the Commiiiiission of (C'onmervation, Canada, gave the openinig ad-dress oIn Tuesdav afternoon...

Peter Gillespie

1922-06-23T23:59:59.000Z

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

International Society for Optical Engineering (SPIE) Fellows  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SPIE recognizes accomplishments and meritorious service in the optics, photonics, optoelectronics, and imaging communities it serves. Fellows are members of distinction who have...

222

Audio Engineering Society Convention Paper 6609  

E-Print Network [OSTI]

expected to find unique natural features, sites of historical significance, wildlife living in a natural and the wildlife therein and to provide for the enjoyment of the same in such manner and by such means. For example, the subtle sound of wind blowing through a forest, the babble of water in a stream

Maher, Robert C.

223

THE PROMISE OF SOLID STATE LIGHTING FOR GENERAL ILLUMINATION  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Conclusions and Recommendations Conclusions and Recommendations from OIDA Technology Roadmaps Co-sponsored by DOE (BTS) and OIDA OIDA OPTOELECTRONICS INDUSTRY DEVELOPMENT ASSOCIATION 1133 Connecticut Avenue, NW Suite 600 Washington, DC 20036 Ph: (202) 785-4426 Fax: (202) 785-4428 Web: http://www.OIDA.org Building Technology, State and Community Programs Energy Efficiency and Renewable Energy U.S. Department of Energy Published by: Optoelectronics Industry Development Association 1133 Connecticut Avenue NW, Suite 600 Washington, DC 20036 Phone: (202) 785-4426 Fax: (202) 785-4428 Internet: http://www.oida.org 1 The Promise of Solid State Lighting for General Illumination s Light Emitting Diodes (LEDs) © 2001 Optoelectronics Industry Development Association Executive Summary In the midst of the rising fuel prices and the blackouts in California there is silent rev-

224

Boldly Illuminating Biology's "Dark Matter"  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14, 2013 14, 2013 Boldly Illuminating Biology's "Dark Matter" Is space really the final frontier, or are the greatest mysteries closer to home? In cosmology, dark matter is said to account for the majority of mass in the universe, however its presence is inferred by indirect effects rather than detected through telescopes. The biological equivalent is "microbial dark matter," that pervasive yet practically invisible infrastructure of life on the planet, which can have profound influences on the most significant environmental processes from plant growth and health, to nutrient cycles in terrestrial and marine environments, the global carbon cycle, and possibly even climate processes. By employing next generation DNA sequencing of genomes isolated from single cells, great

225

Hacking commercial quantum cryptography systems by tailored bright illumination  

E-Print Network [OSTI]

The peculiar properties of quantum mechanics allow two remote parties to grow a private, secret key, even if the eavesdropper can do anything permitted by the laws of nature. In quantum key distribution (QKD) the parties exchange non-orthogonal or entangled quantum states to generate quantum correlated classical data. Consequently, QKD implementations always rely on detectors to measure the relevant quantum property of the signal states. However, practical detectors are not only sensitive to quantum states. Here we show how an eavesdropper can exploit such deviations from the ideal behaviour: We demonstrate experimentally how the detectors in two commercially available QKD systems can be fully remote controlled using specially tailored bright illumination. This makes it possible to acquire the full secret key without leaving any trace; we propose an eavesdropping apparatus built of off-the-shelf components. The loophole is likely to be present in most QKD systems using avalanche photo diodes (APDs) to detect ...

Lydersen, Lars; Wittmann, Christoffer; Elser, Dominique; Skaar, Johannes; Makarov, Vadim; 10.1038/NPHOTON.2010.214

2010-01-01T23:59:59.000Z

226

Hacking commercial quantum cryptography systems by tailored bright illumination  

E-Print Network [OSTI]

The peculiar properties of quantum mechanics allow two remote parties to communicate a private, secret key, which is protected from eavesdropping by the laws of physics. So-called quantum key distribution (QKD) implementations always rely on detectors to measure the relevant quantum property of single photons. Here we demonstrate experimentally that the detectors in two commercially available QKD systems can be fully remote-controlled using specially tailored bright illumination. This makes it possible to tracelessly acquire the full secret key; we propose an eavesdropping apparatus built of off-the-shelf components. The loophole is likely to be present in most QKD systems using avalanche photodiodes to detect single photons. We believe that our findings are crucial for strengthening the security of practical QKD, by identifying and patching technological deficiencies.

Lars Lydersen; Carlos Wiechers; Christoffer Wittmann; Dominique Elser; Johannes Skaar; Vadim Makarov

2010-08-26T23:59:59.000Z

227

Effect of temperature on the electron distribution in illuminated heterostructures  

Science Journals Connector (OSTI)

We solve the 1D Poisson equation for a model heterostructure containing photoexcitable donors and derive solutions for different temperatures in the range 77300 K. We consider a single-interface GaAs/AlxGa1-xAs heterostructure having deep donors in both the AlxGa1-xAs supply layer and in the GaAs buffer, but our approach is applicable to other configurations. The calculation accounts for photogenerated electrons arising from simulated DX centers in the AlxGa1-xAs layer and from impurity donors in the GaAs buffer. Using realistic parameters in a quantitative calculation applicable to steady illumination, we show how light affects the internal distribution of free electrons among the active layers. The results give a transparent picture of the factors that control the response of a unipolar heterostructure to light at different temperatures.

C. M. Hurd; S. P. McAlister; D. J. Day

1989-01-15T23:59:59.000Z

228

Illuminating the Decision Path: The Yucca Mountain Site Recommendation  

SciTech Connect (OSTI)

On February 14, 2002, U.S. Secretary of Energy Spencer Abraham provided to the President the ''Recommendation by the Secretary of Energy Regarding the Suitability of the Yucca Mountain Site for a Repository Under the Nuclear Waste Policy Act of 1982.'' This Recommendation, along with supporting materials, complied with statutory requirements for communicating a site recommendation to the President, and it did more: in 49 pages, the Recommendation also spoke directly to the Nation, illuminating the methodology and considerations that led toward the decision to recommend the site. Addressing technical suitability, national interests, and public concerns, the Recommendation helped the public understand the potential risks and benefits of repository development and placed those risks and benefits in a meaningful national context.

Knox, E.; Slothouber, L.

2003-02-25T23:59:59.000Z

229

Home Energy Score API User: United Illuminating Company and Connecticut Light and Power  

Broader source: Energy.gov [DOE]

The United Illuminating Company and Connecticut Light and Power, administering conservation, and load management programs funded by the Connecticut Energy Efficiency Fund, are Home Energy Score...

230

Designing LED array for uniform illumination distribution by simulated annealing algorithm  

Science Journals Connector (OSTI)

We propose a numerical optimization method designing LED array for achieving a good uniform illumination distribution on target plane. Simulated annealing algorithm is employed to...

Su, Zhouping; Xue, Donglin; Ji, Zhicheng

2012-01-01T23:59:59.000Z

231

Simple structured illumination microscope setup with high acquisition speed by using a spatial light modulator  

Science Journals Connector (OSTI)

We describe a two-beam interference structured illumination fluorescence microscope. The novelty of the presented system lies in its simplicity. A programmable spatial light modulator...

Frster, Ronny; Lu-Walther, Hui-Wen; Jost, Aurlie; Kielhorn, Martin; Wicker, Kai; Heintzmann, Rainer

2014-01-01T23:59:59.000Z

232

American Nuclear Society recognizes Roger W. Tilbrook  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

American Nuclear Society recognizes Roger W. Tilbrook Director's Welcome Organization Achievements Highlights Fact Sheets, Brochures & Other Documents Multimedia Library About Nuclear Energy Nuclear Reactors Designed by Argonne Argonne's Nuclear Science and Technology Legacy Opportunities within NE Division Visit Argonne Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Celebrating the 70th Anniversary of Chicago Pile 1 (CP-1) Argonne OutLoud on Nuclear Energy Argonne Energy Showcase 2012 Highlights Bookmark and Share American Nuclear Society recognizes Roger W. Tilbrook Roger W. Tilbrook, Argonne National Laboratory Nuclear Engineer Roger W. Tilbrook has been recognized for his decades of dedicated service to the American Nuclear Society.

233

Societyof Petroleum Engineers Cleaning Up Spilled Gasoline With Steam: Compo~itional Simulations  

E-Print Network [OSTI]

Societyof Petroleum Engineers SPE 25257 Cleaning Up Spilled Gasoline With Steam: Compo Copyright 1993, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the 121h reviewed by the Society of Petroleum Engineers and are sUbject to correctlo~ by the author(s). The

Patzek, Tadeusz W.

234

33engineering EnginEEring and  

E-Print Network [OSTI]

33engineering EnginEEring and ThE builT EnvironmEnT www.wits.ac.za/ebe #12;34 guide for applicants 2015 The study of Engineering Career opportunities for engineers are limitless and extend beyond the formal engineering sector. A career in engineering requires special talents ­ engineers need

Wagner, Stephan

235

Nuclear industry will be short of engineers  

SciTech Connect (OSTI)

This article discusses the potential shortage of nuclear engineers due to reduction of educational and training facilities and difficulty in attracting minorities into nuclear engineering. The article reports on recommendations from the National Research Council Nuclear Education Study Committee on attracting minorities to nuclear engineering, increasing DOE fellowships, funding for research and development, involvement of utilities and vendors, and support of the American Nuclear Society's advocacy of nuclear engineering education.

Yates, M.

1990-09-13T23:59:59.000Z

236

IEEE SIGNAL PROCESSING LETTERS, VOL. 18, NO. 10, OCTOBER 2011 587 Compressed LED Illumination Sensing  

E-Print Network [OSTI]

IEEE SIGNAL PROCESSING LETTERS, VOL. 18, NO. 10, OCTOBER 2011 587 Compressed LED Illumination emitting diodes (LEDs) are ca- pable of producing high intensity light across a wide spread of frequencies. This facilitates the design of the driving waveforms for the LEDs. This procedure is known as illumination sensing

Nehorai, Arye

237

Photoconductivity of single-wall carbon nanotubes under continuous-wave near-infrared illumination  

E-Print Network [OSTI]

Photoconductivity of single-wall carbon nanotubes under continuous-wave near-infrared illumination studied under continuous-wave near-infrared illumination. The photocurrent exhibits a linear response, we report the observation of cw photo- conductivity of single-wall carbon nanotubes in the near

Euler, William B.

238

Crooker named Optical Society Fellow  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Crooker named Optical Society Fellow January 23, 2014 Scott Crooker of LANL's Condensed Matter and Magnet Science group is a 2014 Fellow of the Optical Society (OSA). The Society...

239

College of Engineering ENGINEERING  

E-Print Network [OSTI]

College of Engineering CYCLONE ENGINEERING RESEARCH `SENSING SKIN' MAKES WIND ENERGY MORE COST of Science and Technology. All rights reserved. Sarah A. Rajala Dean of Engineering James and Katherine Melsa: The College of Engineering is dedicated to advancing alternative energy, including wind energy. Researchers

Mayfield, John

240

Civil Engineering Environmental Engineering  

E-Print Network [OSTI]

our environment) #12;33 Engineering challenges :structures Sydney Opera House Roof stress testing done

Anderson, Jim

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Engineering Institute  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Institute Engineering Institute Engineering dynamics that include flight, vibration isolation for precision manufacturing, earthquake engineering, blast loading, signal processing,...

242

Masters Engineering ELITE History and Philosophy of Engineering University of Toronto APS1018  

E-Print Network [OSTI]

society. We will establish the impact of technology on society and culture. We will cover a broad sweep revolution enabled by electrical power and the 3rd industrial revolution enable by the computer with the role of the engineer in the French military system and the rise of the Polytechnic system of education

Toronto, University of

243

American Chemical Society Award Winners, Chicago, III.  

Science Journals Connector (OSTI)

American Chemical Society Award Winners, Chicago, III. ... Copyright 1970 American Chemical Society ...

1970-10-01T23:59:59.000Z

244

Demonstration of Recessed Downlight Technologies: Power and Illumination Assessment  

SciTech Connect (OSTI)

Solid state lighting (SSL), specifically light-emitting diodes (LED), has been advancing at a rapid pace, and there are presently multiple products available that serve as direct replacements for traditional luminaires. In this demonstration, conventional recessed lights in a conference room were used to compare conventional incandescent A-lamps, incandescent reflector R-lamps, dimming compact fluorescent lamps (CFL), to an LED replacement product. The primary focus during the study was on light delivered to the task plane as provided by the power required by the lighting system. Vertical illuminance, dimming range, and color shift are also important indicators of lighting quality and are discussed in the report. The results clearly showed that LEDs, with dimming-capable drivers, are much more efficient than incandescent and CFLs. Further, LEDs provide much smoother and consistent dimming than dimmable CFLs. On the potential negative side, it is important that the dimming switch be identified as compatible with the LED driver. A wide variety of dimmer switches are capable of dimming LEDs down to 15% of full light output, while select others can be capable of dimming LEDs down to 5%. In addition, LEDs can be intensive light sources, which can result in uncomfortable glare in some applications and to some occupants. Higher ceiling (9-foot or greater) or non-specular reflectors can act to alleviate the potential for glare.

Parker, Steven A.; Beeson, Tracy A.

2009-11-20T23:59:59.000Z

245

Nanoscale and microscale approaches for engineering the in vitro cellular microenvironment  

E-Print Network [OSTI]

Micro- and nanofabrication approaches have dramatically changed our society through their use in microelectronics and telecommunication industries. These engineering tools are also useful for many biological applications ...

Khademhosseini, Ali

2005-01-01T23:59:59.000Z

246

Meetings and Societies  

Science Journals Connector (OSTI)

...River from the Hanford plant (at considerably...SCIENCE, VOL. 124 Meetings and Societies 'tlhe...depositsand nearly 2000 million years...could become a public health hazard...De-partment of Tropical Public Health, Harvard School of Public Health; v. pres...society's national meeting in Los An-geles...

1956-11-23T23:59:59.000Z

248

Sandia National Laboratories: light-emitting diode  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

light-emitting diode Sandian Receives the Illuminating Engineering Society of North America, South Region Technical Award On December 12, 2014, in Capabilities, Energy, Energy...

249

SALC 2014 Presentations  

Broader source: Energy.gov [DOE]

This page provides links to DOE presentations given at the 2014 Illuminating Engineering Society Street and Area Lighting Conference (SALC), held September 14-17 in Nashville, TN.

250

Commercial Building Demonstration and Deployment  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

for Building Energy Innovation * Green Parking Council * Green Sports Alliance * Health Care Without Harm * Illuminating Engineering Society of North America (IES) *...

251

E-Print Network 3.0 - analytical radiative-transfer solutions...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

In Illumination Engineering Society... . Stephens. On the fundamental solution of the radiative transfer equation. Journal of Astrophysical Research... . A numerical solution to...

252

UNDERGRADUATE STUDENT MANUAL Department of Mechanical Engineering  

E-Print Network [OSTI]

, and motions of solid bodies and fluids, heat generation and transport, and applications to analysis, design education that will allow them to adapt to developments in technology in a rapidly changing society engineering (for example, computer-aided-design and manufacturing (CAD/CAM), energy engineering, mechanical

Plotkin, Joshua B.

253

Chinese Renewable Energy Society CRES formerly Chinese Solar Energy Society  

Open Energy Info (EERE)

CRES formerly Chinese Solar Energy Society CRES formerly Chinese Solar Energy Society Jump to: navigation, search Name Chinese Renewable Energy Society (CRES) (formerly Chinese Solar Energy Society) Place Beijing, Beijing Municipality, China Sector Renewable Energy, Solar Product National academic association in renewable energy industry, formerly China Solar Energy society. References Chinese Renewable Energy Society (CRES) (formerly Chinese Solar Energy Society)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Chinese Renewable Energy Society (CRES) (formerly Chinese Solar Energy Society) is a company located in Beijing, Beijing Municipality, China . References ↑ "Chinese Renewable Energy Society (CRES) (formerly Chinese

254

Engines - Spark Ignition Engines  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Spark Ignition Engines Spark Ignition Engines Thomas Wallner and omni engine Thomas Wallner and the omnivorous engine Background Today the United States import more than 60% of its crude oil and petroleum products. Transportation accounts for a major portion of these imports. Research in this field is focused on reducing the dependency on foreign oil by increasing the engine efficiency on the one hand and blending gasoline with renewable domestic fuels, such as ethanol, on the other. Argonne's Research The main focus of research is on evaluation of advanced combustion concepts and effects of fuel properties on engine efficiency, performance and emissions. The platforms used are a single-cylinder research engine as well as an automotive-size four-cylinder engine with direct fuel injection.

255

ENVIRONMENTAL ENGINEERING  

E-Print Network [OSTI]

ENVIRONMENTAL ENGINEERING UNDERGRADUATE HANDBOOK Cornell University Department of Biological and Environmental Engineering School of Civil and Environmental Engineering enve.cornell.edu 2013-2014 #12;Environmental Engineering 2013-2014 1 UNDERGRADUATE HANDBOOK FOR ENVIRONMENTAL ENGINEERING MISSION STATEMENT

Walter, M.Todd

256

STANFORD UNIVERSITY SCHOOL OF ENGINEERING  

E-Print Network [OSTI]

Fundamentals list earlier in Handbook. (5) The two systems electives must be chosen from the following set: CS) Engineering Fundamentals (13 units minimum required) CS 106 Programming Abstract (A and B, or X) 5 ENGR 40 Introductory Electronics 5 Elective (see note 4) Fundamentals Total (13 units minimum) Technology in Society (1

Pratt, Vaughan

257

STANFORD UNIVERSITY SCHOOL OF ENGINEERING  

E-Print Network [OSTI]

(see note 3) Science Total (11 units minimum) Engineering Fundamentals (13 units minimum required) CS) Fundamentals Total (13 units minimum) Technology in Society (1 course required, 3-5 units, see list in SchoolE Undergraduate Handbook science list, plus Psych 30 or 40. AP Chemistry also meets this requirement. Either

Pratt, Vaughan

258

STANFORD UNIVERSITY SCHOOL OF ENGINEERING  

E-Print Network [OSTI]

(see note 3) Science Total (11 units minimum) Engineering Fundamentals (13 units minimum required) CS) Fundamentals Total (13 units minimum) Technology in Society (1 course required, 3-5 units, see list in SchoolE Undergraduate Handbook science list, plus Psych 30. AP Chemistry also meets this requirement. Either

Pratt, Vaughan

259

STANFORD UNIVERSITY SCHOOL OF ENGINEERING  

E-Print Network [OSTI]

) Engineering Fundamentals (13 units minimum required) CS 106 Programming Abstractions (B or X) 5 Engr 40 Introductory Electronics 5 Elective (see note 3) Fundamentals Total 10 (13 units minimum) Technology in Society (1 course required, 3-5 units, see list earlier in Handbook) Totals This Page 52 NOTES: (1) Math 19

Pratt, Vaughan

260

Introduction The Fiber-Lite MI-150 is a 150 Watt quartz halogen fiber optic illuminator designed for general microscopy  

E-Print Network [OSTI]

Introduction ® The Fiber-Lite MI-150 is a 150 Watt quartz halogen fiber optic illuminator designed for general microscopy use. When used with specialty fiber optic cables the MI-150 illuminator can also Illuminator from the carton and retain the manual and any additional documents. ! Remove the fiber optic cable

Kleinfeld, David

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

2014 SAME Mid-Atlantic Regional Joint Engineer Training Symposium (JETS)  

Broader source: Energy.gov [DOE]

The Society of American Military Engineers (SAME) presents itsMid-Atlantic Regional Joint Engineer Training Symposium (JETS) with the topic Navigating the New Normal: Partnerships for the Future.

262

Rank-1 accelerated illumination recovery in scanning diffractive imaging by transparency estimation.  

SciTech Connect (OSTI)

Illumination retrieval in scanning diffractive imaging a.k.a. ptychography is challenging when the specimen is weakly scattering or surrounded by empty space. We describe a rank-1 acceleration method for weakly scattering or piecewise smooth specimens.

Wu, Hau-Tieng

2014-08-07T23:59:59.000Z

263

Rapid acquisition of specular and diffuse normal maps from polarized spherical gradient illumination  

Science Journals Connector (OSTI)

We estimate surface normal maps of an object from either its diffuse or specular reflectance using four spherical gradient illumination patterns. In contrast to traditional photometric stereo, the spherical patterns allow normals to be estimated simultaneously ...

Wan-Chun Ma; Tim Hawkins; Pieter Peers; Charles-Felix Chabert; Malte Weiss; Paul Debevec

2007-06-01T23:59:59.000Z

264

Hybridization process for back-illuminated silicon Geiger-mode avalanche photodiode arrays  

E-Print Network [OSTI]

We present a unique hybridization process that permits high-performance back-illuminated silicon Geiger-mode avalanche photodiodes (GM-APDs) to be bonded to custom CMOS readout integrated circuits (ROICs) - a hybridization ...

Schuette, Daniel R.

265

Capturing a Surface Light Field Under Virtual Illumination Greg Coombe Jan-Michael Frahm  

E-Print Network [OSTI]

]. This parameterization results in a compact representation that can be rendered at interactive rates. A SLF is a 4D of the multiplexed illumination algorithm [19]. This results in a high-dynamic range SLF which accurately represents

Frahm, Jan-Michael

266

Hybrid sunlight/LED illumination and renewable solar energy saving concepts for indoor lighting  

Science Journals Connector (OSTI)

A hybrid method for using sunlight and light-emitting diode (LED) illumination powered by renewable solar energy for indoor lighting is simulated and presented in this study. We can...

Tsuei, Chih-Hsuan; Sun, Wen-Shing; Kuo, Chien-Cheng

2010-01-01T23:59:59.000Z

267

Illuminating system and method for specialized and decorative lighting using liquid light guides  

DOE Patents [OSTI]

The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools.

Zorn, Carl J. (Yorktown, VA); Kross, Brian J. (Yorktown, VA); Majewski, Stanislaw (Grafton, VA); Wojcik, Randolph F. (Yorktown, VA)

1998-01-01T23:59:59.000Z

268

Engineering Alumni Society Minutes of the Engineering Alumni Society Board of Directors  

E-Print Network [OSTI]

307 Levine Attendees: Dean Eduardo Glandt Dawn Becket ­ D X Nisar Amin ­ AL Matt Quale ­ Pres X Robert. AWE networking event is coming up on Monday. o At Sweeten Alumni House o An email was sent out already

Plotkin, Joshua B.

269

Energy and American Society : a Reference Handbook  

E-Print Network [OSTI]

American Society: A Reference Handbook By E. Willard MillerSOCIETY: A REFERENCE HANDBOOK (Contemporary World IssuesSOCIETY: A REFERENCE HANDBOOK is an important reference work

Li, Haipeng

1996-01-01T23:59:59.000Z

270

The Journal of The Minerals, Metals & Materials Society (TMS)  

E-Print Network [OSTI]

1 23 JOM The Journal of The Minerals, Metals & Materials Society (TMS) ISSN 1047-4838 JOM DOI 10 of Materials Science and Engineering and the Materials Research Institute, The Pennsylvania State University cycles require greater resistance of the cladding to failure, espe- cially in view of the industry

Motta, Arthur T.

271

Mechanical Engineer  

Broader source: Energy.gov [DOE]

This position is located in the Facilities Engineering (TESF) organization of Substation Engineering (TES) within the Engineering and Technical Services (TE) organization of the Transmission (T)...

272

Michael Borland named American Physical Society Fellow  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Grad student is officially a GEMS Grad student is officially a GEMS NIU physicist Susan Mini lands NSF grant for APS beamline upgrades Argonne's Campuzano Honored by Hispanic Engineering Bugs in the News An R&D-100 Award for a New Mammography System APS News Archives: 2012 | 2011 | 2010 | 2009 2008 | 2007 | 2006 | 2005 2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed Michael Borland named American Physical Society Fellow DECEMBER 4, 2007 Bookmark and Share Michael Borland Michael Borland of the Argonne Accelerator Systems Division has been elected a Fellow of the American Physical Society. The honor recognizes his "outstanding contributions to fourth-generation light sources, particularly for development and support of the program ELEGANT, the first integrated accelerator code to realistically model coherent synchrotron radiation

273

130 LPW 1000 Lm Warm White LED for Illumination  

SciTech Connect (OSTI)

An illumination-grade warm-white LED, having correlated color temperature (CCT) between 2700 and 3500 K and capable of producing 1000 lm output at over 130 lm/W at room temperature, has been developed in this program. The high-power warm-white LED is an ideal source for use in indoor and outdoor lighting applications. Over the two year period, we have made the following accomplishments: Developed a low-cost high-power white LED package and commercialized a series of products with CCT ranging from 2700 to 5700 K under the product name LUXEON M; Demonstrated a record efficacy of 124.8 lm/W at a flux of 1023 lm, CCT of 3435 K and color rendering index (CRI) over 80 at room temperature in the productized package; Demonstrated a record efficacy of 133.1 lm/W at a flux of 1015 lm, CCT of 3475 K and CRI over 80 at room temperature in an R&D package. The new high-power LED package is a die-on-ceramic surface mountable LED package. It has four 2 mm2 InGaN pump dice, flip-chip attached to a ceramic submount in a 2x2 array configuration. The submount design utilizes a design approach that combines a high-thermal- conductivity ceramic core for die attach and a low-cost and low-thermal-conductivity ceramic frame for mechanical support and as optical lens carrier. The LED package has a thermal resistance of less than 1.25 K/W. The white LED fabrication also adopts a new batch level (instead of die-by-die) phosphor deposition process with precision layer thickness and composition control, which provides not only tight color control, but also low cost. The efficacy performance goal was achieved through the progress in following key areas: (1) high-efficiency royal blue pump LED development through active region design and epitaxial growth quality improvement (funded by internal programs); (2) improvement in extraction efficiency from the LED package through improvement of InGaN-die-level and package-level optical extraction efficiency; and (3) improvement in phosphor system efficiency by improving the lumen equivalent (LE) and phosphor package efficiency (PPE) through improvement in phosphor-package interactions. The high-power warm-white LED product developed has been proven to have good reliability through extensive reliability tests. The new kilo-lumen package has been commercialized under the product name LUXEON M. As of the end of the program, the LUXEON M product has been released in the following CCT/CRI combinations: 3000K/70, 4000K/70, 5000K/70, 5700K/70, 2700K/80, 3000K/80 and 4000K/80. LM-80 tests for the products with CCTs of 4000 K and higher have reached 8500 hours, and per IESNA TM-21-11 have established an L70 lumen maintenance value of >51,000 hours at A drive current and up to 120 C board temperature.

Soer, Wouter

2012-06-14T23:59:59.000Z

274

Mechanical engineering COLLEGE of ENGINEERING  

E-Print Network [OSTI]

. Mechanical engineering is a broad, versatile and creative discipline concerned with conversion of energyMechanical engineering COLLEGE of ENGINEERING DepartmentofMechanicalEngineering CollegeofEngineering 5050AnthonyWayneDrive Detroit,MI48202 College of engineering t Educating future engineers for 80 years

Berdichevsky, Victor

275

Environmental engineering: A profession in transition  

SciTech Connect (OSTI)

This 50th Industrial Waste Conference at Purdue gives one an opportunity and excuse to reflect on progress in Environmental Engineering and speculate on future changes. The author suggests that during this 50-year period Environmental Engineering has emerged as a discrete and creditable body of knowledge, practice, and academic study. In this review he presents a personal view of the evolution of Environmental Engineering and its present status. He also suggests some future directions and principles which may prove useful, especially in the academic world. The paper discusses the sphere of the environmental engineer, the social incentive, the academic curriculum, environmental engineers and society, the chlorine controversy, research, and the electronic revolution.

Mackay, D. [Univ. of Toronto, Ontario (Canada). Dept. of Chemical Engineering and Applied Chemistry

1996-11-01T23:59:59.000Z

276

Journal of The Electrochemical Society, 159 (3) R31-R45 (2012) R31 0013-4651/2012/159(3)/R31/15/$28.00 The Electrochemical Society  

E-Print Network [OSTI]

/15/$28.00 © The Electrochemical Society Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective,c and Venkat R. Subramaniana,,z aDepartment of Energy, Environmental and Chemical Engineering, Washington Renewable Energy Laboratory, Golden, Colorado 80401, USA cDepartment of Chemical Engineering, Massachusetts

Subramanian, Venkat

277

Engineering Prestigious  

E-Print Network [OSTI]

Engineering Studious Prestigious Adventurous Curious Ambitious Ingenious #12;TheCollegeof Engineering We are committed to innovation in all aspects of engineering education and research. We deliver an accredited professional education program that effectively prepares our students to become engineering

Saskatchewan, University of

278

The authors are solely responsible for the content of this technical presentation. The technical presentation does not necessarily reflect the official position of the American Society of Agricultural Engineers (ASAE), and its printing and distribution do  

E-Print Network [OSTI]

ETHANOL-DIESEL BLENDS: A STEP TOWARDS A BIO-BASED FUEL FOR DIESEL ENGINES Alan C. Hansen Associate, with particular reference to the alcohols. Blends of ethanol and diesel fuel were investigated and found of ethanol and it is able to compete fairly well with standard diesel. Hence there has been renewed interest

Illinois at Urbana-Champaign, University of

279

College of Engineering & Engineering Technology  

E-Print Network [OSTI]

Specialist -Tech Services Coordinator Dean Promod Vohra Mechanical Engineering Pradip Majumdar, ChairCollege of Engineering & Engineering Technology COMPUTER OPERATIONS -Manager -LAN Support -Senior Systems Engineer -Clerical Position OFFICE OF SPONSORED PROJECTS -Research Development Specialist

Kostic, Milivoje M.

280

AC 2010-863: POSTER, INCORPORATING ENGINEERING DESIGN INTO ELEMENTARY SCHOOL SCIENCE CURRICULA  

E-Print Network [OSTI]

AC 2010-863: POSTER, INCORPORATING ENGINEERING DESIGN INTO ELEMENTARY SCHOOL SCIENCE CURRICULA Academy of Sciences, which reports that the number of students who have had formal engineering education Marulcu, Boston College © American Society for Engineering Education, 2010 #12;Incorporating Engineering

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Report. The Royal Society redevelopment  

Science Journals Connector (OSTI)

...contemporary interventions. ACKNOWLEDGEMENTS The Royal Society wishes to acknowledge the following generous donations to the rede- velopment of 69 Carlton House Terrace. The Society also wishes to acknowledge the substantial donations that have been made...

2005-01-01T23:59:59.000Z

282

Report. The Royal Society redevelopment  

Science Journals Connector (OSTI)

22 January 2005 research-article Report. The Royal Society redevelopment Stefanie Fischer Burrell Foley...6-9 Carlton House Terrace|Burrell Foley Fischer Architects| REPORT The Royal Society redevelopment Stefanie Fischer, Burrell Foley...

2005-01-01T23:59:59.000Z

283

Terry Fuller Engineering  

E-Print Network [OSTI]

Technology Industrial Engineering Industrial Engineering Engineering Center Engineering Center ComputerTerry Fuller Petroleum Engineering Research Building Terry Fuller Petroleum Engineering Research Building Construction Engineering and Engineering Technology Construction Engineering and Engineering

Gelfond, Michael

284

College of Engineering and Science ENGINEERING AND  

E-Print Network [OSTI]

Engineering, Civil Engineer- ing, Computer Engineering, Electrical Engineering, Industrial Engineering86 College of Engineering and Science 86 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which

Stuart, Steven J.

285

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

, Hydrogeology, Industrial Engineering, Materials Science and Engineering, Mathematical Sciences, MechanicalCollege of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bio- engineering, Biosystems Engineering

Stuart, Steven J.

286

College of Engineering and Science ENGINEERING AND  

E-Print Network [OSTI]

Engineering, Industrial Engineering, and Mechanical Engineering are each accredited by the Engineering87 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering educational oppor- tunities. The innovative combination of engineering and science disciplines that comprises

Stuart, Steven J.

287

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

, Hydrogeology, Industrial Engineering, Materials Science and Engineering, Mathematical Sciences, Mechanical35 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bio- engineering, Biosystems Engineering

Stuart, Steven J.

288

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

, Chemical Engineering, Chemistry, Civil Engineering, Com- puter Engineering, Computer Science, Digital ProCollege of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering

Bolding, M. Chad

289

Influence of different illumination profiles on the on-state resistances of silicon carbide photoconductive semiconductor switches  

SciTech Connect (OSTI)

Characteristics of a silicon-carbide (SiC) photoconductive switch under different illumination profiles are presented. We triggered a V-doped semi-insulated 6H-SiC switch with lateral geometry using a laser beam of 532-nm wavelength. Photoconductivity tests for different spot profiles and locations show that such switches achieve a minimum on-state resistance when the switching gap is illuminated. The differences between on-state resistances are small for various partial illuminations of the switching gap. Semiconductor modeling is used to simulate the electric field and current profiles for different partial illuminations. The simulation results show poor on-state switch performance when partially illuminated. Based on these results, a more revealing circuit model for the switch matches well with experimental results for partial illuminations.

Wang, Langning, E-mail: wanglangning@126.com; Xun, Tao; Yang, Hanwu; Liu, Jinliang; Zhang, Yu [College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha 410073 (China)] [College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha 410073 (China)

2014-04-15T23:59:59.000Z

290

Solar LED Light Pilot Project Illuminates the Way in Alabama | Department  

Broader source: Energy.gov (indexed) [DOE]

LED Light Pilot Project Illuminates the Way in Alabama LED Light Pilot Project Illuminates the Way in Alabama Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Tertia Speiser Project Officer, Golden Field Office "I want to invite everyone to come to Boaz and see the future of responsible highway lighting and power generation." -Boaz Mayor Tim Walker

291

Solar LED Light Pilot Project Illuminates the Way in Alabama | Department  

Broader source: Energy.gov (indexed) [DOE]

Solar LED Light Pilot Project Illuminates the Way in Alabama Solar LED Light Pilot Project Illuminates the Way in Alabama Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Tertia Speiser Project Officer, Golden Field Office "I want to invite everyone to come to Boaz and see the future of responsible highway lighting and power generation." -Boaz Mayor Tim Walker

292

Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps  

SciTech Connect (OSTI)

Creation of light for work, socializing, and general illumination is a fundamental application of technology around the world. For those who lack access to electricity, an emerging and diverse range of LED based lighting products hold promise for replacing and/or augmenting their current fuel-based lighting sources that are costly and dirty. Along with analysis of environmental factors, economic models for total cost-ofownership of LED lighting products are an important tool for studying the impacts of these products as they emerge in markets of developing countries. One important metric in those models is the minimum illuminance demanded by end-users for a given task before recharging the lamp or replacing batteries. It impacts the lighting service cost per unit time if charging is done with purchased electricity, batteries, or charging services. The concept is illustrated in figure 1: LED lighting products are generally brightest immediately after the battery is charged or replaced and the illuminance degrades as the battery is discharged. When a minimum threshold level of illuminance is reached, the operational time for the battery charge cycle is over. The cost to recharge depends on the method utilized; these include charging at a shop at a fixed price per charge, charging on personal grid connections, using solar chargers, and purchasing dry cell batteries. This Research Note reports on the observed"charge-triggering" illuminance level threshold for night market vendors who use LED lighting products to provide general and task oriented illumination. All the study participants charged with AC power, either at a fixed-price charge shop or with electricity at their home.

Johnstone, Peter; Jacobson, Arne; Mills, Evan; Radecsky, Kristen

2009-03-21T23:59:59.000Z

293

ANTHROPOLOGICAL SOCIETY OF WASHINGTON  

Science Journals Connector (OSTI)

...plants of that State, the species of death camas, Zygadenu8, spp. and the larkspurs...a paper on the ' Mag-netic Survey of North Carolina,' which had been carried on...MITCHELL SCIENTIFIC SOCIETY, UNIVERSITY OF NORTH CAROLINA. THE 134th meeting of the club...

WALTER HOUGH

1901-04-26T23:59:59.000Z

294

Societies and Academies  

Science Journals Connector (OSTI)

... Society, Oct. 15.F. Twyman and A. Harvey: The validity of the Schwarzschild relation as applied to the use of the logarithmic sector. A direct experimental test ... to the use of the logarithmic sector. A direct experimental test is made of the Schwarzschild relation as applied to the logarithmic sector used in conjunction with a quartz spectrograph. ...

1931-10-31T23:59:59.000Z

295

Resilience of gated avalanche photodiodes against bright illumination attacks in quantum cryptography  

E-Print Network [OSTI]

Semiconductor avalanche photodiodes (APDs) are commonly used for single photon detection in quantum key distribution. Recently, many attacks using bright illumination have been proposed to manipulate gated InGaAs APDs. In order to devise effective counter-measures, careful analysis of these attacks must be carried out to distinguish between incorrect operation and genuine loopholes. Here, we show that correctly-operated, gated APDs are immune to continuous-wave illumination attacks, while monitoring the photocurrent for anomalously high values is a straightforward counter-measure against attacks using temporally tailored light.

Z. L. Yuan; J. F. Dynes; A. J. Shields

2011-06-14T23:59:59.000Z

296

Modeling of dimmable High Power LED illumination distribution using ANFIS on the isolated area  

Science Journals Connector (OSTI)

High power light emitting diodes (HP-LEDs) are more suitable for energy saving applications and have becoming replacing traditional fluorescent and incandescent bulbs for its energy efficient. Therefore, HP-LED lighting has been regarded in the next-generation lighting. In this study, illumination distribution of white color HP-LED is modeled by adaptive neuro-fuzzy inference system (ANFIS) approach on the isolated area while LED head is fixed. Subtractive clustering with hybrid learning approach is used to train the realized ANFIS architectures. End of the numerous experiment we finally concluded that, ANFIS could be used to modeling the illumination distribution applications perfectly.

?smail Kiyak; Vedat Topuz; Blent Oral

2011-01-01T23:59:59.000Z

297

Standoff Hyperspectral Imaging of Explosives Residues Using Broadly Tunable External Cavity Quantum Cascade Laser Illumination  

SciTech Connect (OSTI)

We describe experimental results on the detection of explosives residues using active hyperspectral imaging by illumination of the target surface using an external cavity quantum cascade laser (ECQCL) and imaging using a room temperature microbolometer camera. The active hyperspectral imaging technique forms an image hypercube by recording one image for each tuning step of the ECQCL. The resulting hyperspectral image contains the full absorption spectrum produced by the illumination laser at each pixel in the image which can then be used to identify the explosive type and relative quantity using spectral identification approaches developed initially in the remote sensing community.

Bernacki, Bruce E.; Phillips, Mark C.

2010-05-01T23:59:59.000Z

298

THE EFFECT OF SUBBANDGAP ILLUMINATION ON THE BULK RESISTIVITY OF CDZNTE  

SciTech Connect (OSTI)

The variation in bulk resistivity during infrared (IR) illumination above 950 nm of state-of-the-art CdZnTe (CZT) crystals grown using the traveling heating method or the modified Bridgman method is documented. The change in steady-state current with and without illumination is also evaluated. The influence of secondary phases (SP) on current?voltage (I?V) characteristics is discussed using IR transmission microscopy to determine the defect concentration within the crystal bulk. SP present within the CZT are connected to the existence of deep, IR-excitable traps within the bandgap.

Wright, J.; Washington, A.; Duff, M.; Burger, A.; Groza, M.; Buliga, V.

2013-08-13T23:59:59.000Z

299

Effects of Infrared-LED Illumination Associated with Treadmill Training on Biomechanical Parameters in Post Menopausal Women  

Science Journals Connector (OSTI)

The objective of this study was to investigate the effects of infrared-LED illumination (850nm) associated with treadmill training on biomechanical parameters (power, work and...

Paolillo, Fernanda R; Milan, Juliana C; Barreto, Selva G; Rebelatto, Jos R; Borgui-Silva, Audrey; Parizotto, Nivaldo A; Kurachi, Cristina; Bagnato, Vanderlei S

300

Engineering Institute  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering Institute Engineering Institute Engineering Institute Engineering dynamics that include flight, vibration isolation for precision manufacturing, earthquake engineering, blast loading, signal processing, and experimental model analysis. Contact Leader, LANL Charles Farrar Email Leader, UCSD Michael Todd Email LANL Program Administrator Jutta Kayser (505) 663-5649 Email Collaboration for conducting mission-driven, multidisciplinary engineering research and recruiting, revitalization, and retention of current & future staff The Engineering Institute is a collaboration between LANL and the University of California at San Diego (UCSD) Jacobs School of Engineering, whose mission is to develop a comprehensive approach for conducting mission-driven, multidisciplinary engineering research

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Terry Fuller Engineering  

E-Print Network [OSTI]

Construction Engineering and Engineering Technology Industrial Engineering Industrial Engineering EngineeringTerry Fuller Petroleum Engineering Research Building Terry Fuller Petroleum Engineering Research Marsha Sharp Center for Student Athletics Construction Engineering and Engineering Technology

Gelfond, Michael

302

ENGINEERING UNDERGRADUATE  

E-Print Network [OSTI]

ENGINEERING UNDERGRADUATE HANDBOOK Fall 2013 #12;Name: ____________________________________________________ E-mail: ____________________________________________________ College of Engineering Cornell University ABET Accredited Programs for 2013­14 ABET (Accreditation Board for Engineering and Technology

Walter, M.Todd

303

Engineering Why engineering at Sussex?  

E-Print Network [OSTI]

(Hons) in Automotive Engineering (with an industrial placement year) BEng (Hons) in Automotive Engineering BEng (Hons) in Automotive Engineering (with an industrial placement year) MEng (Hons) in Computer Engineering MEng (Hons) in Computer Engineering (with an industrial placement year) BEng (Hons) in Computer

Sussex, University of

304

Biological Engineering Electives Biosystems Engineering  

E-Print Network [OSTI]

-Solid Mechanics (3) EGM 4853 Bio-Fluid Mechanics (3) ENV Environmental Engineering Courses CWR Civil EngineeringBiological Engineering Electives Biosystems Engineering Departmental Electives: (Choose at least one of the following) ABE 4034 Remote Sensing in Engineering: Science, Sensor & Applications (3) ABE

Hill, Jeffrey E.

305

College of Engineering Engineering in  

E-Print Network [OSTI]

optics · Nuclear technologies · High-performance materials #12;College of Engineering ... and of the 21stCollege of Engineering Engineering in Social Context Jonathan Wickert Dean of Engineering #12;College of Engineering Game changers of the 20th century ... · Electrification · Automobile · Airplane

Lin, Zhiqun

306

American Nuclear Society Annual Meeting | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

American Nuclear Society Annual Meeting American Nuclear Society Annual Meeting American Nuclear Society Annual Meeting June 25, 2007 - 2:08pm Addthis Remarks Prepared for U.S. Secretary of Energy Samuel W. Bodman Thank you, Art. It's a pleasure to be back in Boston today. My family and I lived here for nearly 40 years, and I always appreciate the opportunity to return to this great city. I had the good fortune to attend graduate school right across the river at MIT, where I studied chemical engineering. I entered MIT at a pivotal time in the history of our nation - and the history of our scientific establishment. I often describe myself as a product of the Sputnik generation. I have vivid memories of standing with my parents in our backyard in Glen Ellyn, Illinois, staring up at the sky, trying to make out

307

American Nuclear Society Annual Meeting | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

American Nuclear Society Annual Meeting American Nuclear Society Annual Meeting American Nuclear Society Annual Meeting June 25, 2007 - 2:08pm Addthis Remarks Prepared for U.S. Secretary of Energy Samuel W. Bodman Thank you, Art. It's a pleasure to be back in Boston today. My family and I lived here for nearly 40 years, and I always appreciate the opportunity to return to this great city. I had the good fortune to attend graduate school right across the river at MIT, where I studied chemical engineering. I entered MIT at a pivotal time in the history of our nation - and the history of our scientific establishment. I often describe myself as a product of the Sputnik generation. I have vivid memories of standing with my parents in our backyard in Glen Ellyn, Illinois, staring up at the sky, trying to make out

308

Illumination and Affine-Invariant Point Matching using an Ordinal Approach Indian Institute Of Technology Madras  

E-Print Network [OSTI]

Illumination and Affine- Invariant Point Matching using an Ordinal Approach Raj Gupta Indian://www.cs.iitm.ernet.in/~rgupta/ Anurag Mittal Indian Institute Of Technology Madras I.I.T Post Office Chennai-600 036 amittal- invariant point matching using ordinal features. Ordinal measures for matching only consider the order

Mittal, Anurag

309

Street Light View: Enriching Navigable Panoramic Street View Maps with Informative Illumination Thumbnails  

E-Print Network [OSTI]

1 Street Light View: Enriching Navigable Panoramic Street View Maps with Informative Illumination, Stony Brook University ABSTRACT Google Street View is a technology featured in Google Maps and Google Earth that provides panoramic and immersive views of street scenes in many cities around the world

Mueller, Klaus

310

Fast Illumination-invariant Background Subtraction using Two Views: Error Analysis, Sensor Placement and Applications  

E-Print Network [OSTI]

Fast Illumination-invariant Background Subtraction using Two Views: Error Analysis, Sensor£ Abstract Background modeling and subtraction to detect new or moving objects in a scene is an important a detailed analysis of such errors. Then, we propose a sensor configuration that eliminates false de

Paragios, Nikos

311

Development of Low Noise, BackSide Illuminated Silicon Photodiode Arrays 1  

E-Print Network [OSTI]

Development of Low Noise, Back­Side Illuminated Silicon Photodiode Arrays 1 S.E. Holland Member photodiode arrays for use with positron­emission tomography (PET). A fabrication process developed for high) results in ? 70% quantum efficiency over the wavelength range of 400--1000 nm. The photodiodes

312

High-Speed LED Illumination Andrew Santos, Christopher Salthouse, Ph.D.  

E-Print Network [OSTI]

High-Speed LED Illumination Andrew Santos, Christopher Salthouse, Ph.D. University of Massachusetts (LEDs) because they are available in a wider range of wavelengths. Research Objectives · Measure LED Frequency Responses · Develop High-Frequency LED Circuit Model · Develop High-Frequency Circuit Model of LED

Mountziaris, T. J.

313

Modeling of dimmable High Power LED illumination distribution using ANFIS on the isolated area  

Science Journals Connector (OSTI)

High power light emitting diodes (HP-LEDs) are more suitable for energy saving applications and have becoming replacing traditional fluorescent and incandescent bulbs for its energy efficient. Therefore, HP-LED lighting has been regarded in the next-generation ... Keywords: ANFIS, High Power LED, Illumination distribution

?smail Kiyak; Vedat Topuz; Blent Oral

2011-09-01T23:59:59.000Z

314

Modeling and Simulation of Solar PV Arrays under Changing Illumination Conditions  

E-Print Network [OSTI]

the amount of electric power that may be generated from the solar panel at time of use. To be specificModeling and Simulation of Solar PV Arrays under Changing Illumination Conditions Dzung D Nguyen shadows (a passing cloud) on the output power of solar PV arrays. Each solar array is composed of a matrix

Lehman, Brad

315

X-ray absorption anisotropy for polychromatic illumination--Crystal views from inside  

E-Print Network [OSTI]

X-ray absorption anisotropy for polychromatic illumination--Crystal views from inside P. Korecki a Keywords: X-ray absorption Real-space imaging X-ray holography Electron channeling Electron backscatter of the fine structure in X-ray absorption anisotropy, which results from incident beam diffraction

Korecki, Pawe³

316

Seismological Society of America  

Science Journals Connector (OSTI)

...Associated with Engineering Professional...76, Number 2 March/April...20 Mins) Nuclear Explosion...Tectonics and for Nuclear Test Ban Monitoring...76, Number 2 193 Wednesday...Patton, H. Guideline for ANSS Seismic...CISN/ANSS Engineering Frequency-dependent...

317

Principal Associate Director - Science, Technology, and Engineering  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Principal Associate Director - Science, Technology, and Engineering Principal Associate Director - Science, Technology, and Engineering Bishop oversees directorates of Chemistry, Life, and Earth Sciences; Engineering and Engineering Sciences; Experimental Physical Sciences; Information Technology; and Theory, Simulation, and Computation. Contact Operator Los Alamos National Laboratory (505 667-5061 Bishop is a Fellow of the American Physical Society, the Institute of Physics, and the American Association for the Advancement of Science; a recipient of the Department of Energy's E.O. Lawrence Award; a Humboldt Senior Fellow; and a LANL Fellow. Alan R. Bishop Principal Associate Director for Science, Technology, and Engineering Alan R. Bishop, Acting Principal Associate Director for Science, Technology and Engineering As Principal Associate Director for Science, Technology, and Engineering,

318

College of Engineering College of Engineering  

E-Print Network [OSTI]

Civil Engineering Computer Engineering Electrical Engineering Engineering Science Environmental is to provide high quality teaching, advising, research, outreach, and service in a land grant, Carnegie Class I, Civil and Environmental Engineering, Electrical and Computer Engineering, and Mechanical Engineering

319

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

, Hydrogeology, Industrial Engineering, Materials Science and Engineering, Mathematical Sciences, MechanicalCollege of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi

Stuart, Steven J.

320

College of Engineering and Science ENGINEERING AND  

E-Print Network [OSTI]

, Electrical Engineering, Industrial Engineering, Materials Science and Engineering (Inorganic), and Mechanical91 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering educational oppor- tunities. The innovative combination of engineering and science disciplines that comprises

Stuart, Steven J.

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

, Hydrogeology, Industrial Engineering, Materials Science and Engineering, Mathematical Sciences, Mechanical35 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi

Stuart, Steven J.

322

Research Society Fellow  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hoagland selected as a new Materials Hoagland selected as a new Materials Research Society Fellow July 9, 2013 Richard G. Hoagland of the Laboratory's Materials Science in Radiation and Dynamic Extremes group has been honored with the rank of Fellow by the Materials Research Society (MRS). Hoagland is cited for "outstanding contributions in fracture mechanics and atomistic modeling of dislocation mechanisms of deformation and fracture of metals, ceramics and nanolayered composites." Achievements Hoagland received a doctorate from The Ohio State University. He worked at Battelle Columbus until moving to academia (Vanderbilt, Ohio State, and Washington State University). He has been a professor emeritus at Washington State University since 1999. Hoagland spent a year as the prestigious Bernd T. Matthias Scholar in Los

323

College of Engineering Mechanical Engineering  

E-Print Network [OSTI]

College of Engineering Mechanical Engineering Core 2.0 Completion Checklist Mechanical Engineering Science IN CHMY 141 (CHEM 131) 6 Research and Creative Experience R EMEC 489R & EMEC 499 R (ME 404R & ME

Dyer, Bill

324

1. Course Title: CE 1101: Introduction to Civil Engineering  

E-Print Network [OSTI]

and geoengineers play in modern society To inform students of the types of projects performed by civil engineers tools, computational methods for solving civil engineering problems. Spreadsheets, Visual Basic, Matlab techniques in Matlab Acquire or perfect the art of coding. Overcome any anxiety generated by coding. Develop

Mlllet, Dylan B.

325

ENVIRONMENTAL ENGINEERING  

E-Print Network [OSTI]

engineering covers a wide range of critical services, from designing water and wastewater treatment facilitiesENVIRONMENTAL ENGINEERING www.cee.pdx.edu What do environmental engineers do? Civil and Environmental Engineering (CEE) is an exciting, challenging, and dynamic field that is critical to our quality

326

Shockwave Engine: Wave Disk Engine  

SciTech Connect (OSTI)

Broad Funding Opportunity Announcement Project: MSU is developing a new engine for use in hybrid automobiles that could significantly reduce fuel waste and improve engine efficiency. In a traditional internal combustion engine, air and fuel are ignited, creating high-temperature and high-pressure gases which expand rapidly. This expansion of gases forces the engines pistons to pump and powers the car. MSUs engine has no pistons. It uses the combustion of air and fuel to build up pressure within the engine, generating a shockwave that blasts hot gas exhaust into the blades of the engines rotors causing them to turn, which generates electricity. MSUs redesigned engine would be the size of a cooking pot and contain fewer moving partsreducing the weight of the engine by 30%. It would also enable a vehicle that could use 60% of its fuel for propulsion.

None

2010-01-14T23:59:59.000Z

327

Undergraduate Civil Engineering Civil Engineering is an international profession that provides solutions for pressing societal challenges for both  

E-Print Network [OSTI]

science to develop new building materials. Civil engineers use advanced sensors and communication devices in advance of construction. Civil Engineering bridges science and society, and thus plays a leading role of these received advanced degrees are in other technical fields such as aerospace, business administration

Staum, Jeremy

328

National Geographic Society Kids Network: Report on 1994 teacher participants  

SciTech Connect (OSTI)

In 1994, National Geographic Society Kids Network, a computer/telecommunications-based science curriculum, was presented to elementary and middle school teachers through summer programs sponsored by NGS and US DOE. The network program assists teachers in understanding the process of doing science; understanding the role of computers and telecommunications in the study of science, math, and engineering; and utilizing computers and telecommunications appropriately in the classroom. The program enables teacher to integrate science, math, and technology with other subjects with the ultimate goal of encouraging students of all abilities to pursue careers in science/math/engineering. This report assesses the impact of the network program on participating teachers.

NONE

1995-03-01T23:59:59.000Z

329

Meetings and Societies  

Science Journals Connector (OSTI)

...experience, many new plants will not be...Andrews, Dow Chemical Com-pany...Lidz, 551 Madison Ave., New...13-18. American Chemical Soc., 133rd...Univ. of Illinois, 808 S. Wood...20-23. Chemical Engineering...

1957-12-20T23:59:59.000Z

330

Stirling engines  

SciTech Connect (OSTI)

The Stirling engine was invented by a Scottish clergyman in 1816, but fell into disuse with the coming of the diesel engine. Advances in materials science and the energy crisis have made a hot air engine economically attractive. Explanations are full and understandable. Includes coverage of the underlying thermodynamics and an interesting historical section. Topics include: Introduction to Stirling engine technology, Theoretical concepts--practical realities, Analysis, simulation and design, Practical aspects, Some alternative energy sources, Present research and development, Stirling engine literature.

Reader, G.T.; Hooper

1983-01-01T23:59:59.000Z

331

College of Engineering Industrial Engineering  

E-Print Network [OSTI]

College of Engineering Industrial Engineering Core 2.0 Completion Checklist Industrial Engineering) 6 Research and Creative Experience R EIND 499R (I&ME 444 R and I&ME 445 R) Note: Courses completed Social Sciences; * EGEN 310 (ENGR 310), Multidisciplinary Engineering Design, may be substituted

Dyer, Bill

332

Computer Engineering Mekelweg 4,  

E-Print Network [OSTI]

, Suriname Computer Engineering Department of Electrical Engineering Faculty of Electrical Engineering

Kuzmanov, Georgi

333

Personality, Authority, and Society  

E-Print Network [OSTI]

and claims th J . I O' I at a . ewis 1 iaspora lad no place in Germany he was in the habi re di . id d It of.sp~n lng -- as IS eVI ~nce by a recently published collection _. of hIS late letters -- that If everything in Germany was alread ' bad. h~ certainly... to a large extent :;n i~s mterpreranon."3 An intensive theoretical investigation into the 87 Persona/it)', Authority, and Society problem of authoritarian cognitive structures had already taken place in the thirties, as part of the Institute's Studies...

Werz, Michael

1998-04-01T23:59:59.000Z

334

AC 2010-1901: NASA SENIOR DESIGN: SYSTEMS ENGINEERING AND REUSABLE AVIONICS  

E-Print Network [OSTI]

AC 2010-1901: NASA SENIOR DESIGN: SYSTEMS ENGINEERING AND REUSABLE AVIONICS James Conrad intelligence, and engineering education. © American Society for Engineering Education, 2010 #12;NASA Senior so that the students were able to meet nearly all of the project requirements. NASA Faculty Fellow

Conrad, James M.

335

Humanities and Social Relevance for Chemistry and Chemical Engineering Students: The Leonardo Project  

E-Print Network [OSTI]

Humanities and Social Relevance for Chemistry and Chemical Engineering Students: The Leonardo chemistry and chemical-engineering education. Its goal is to prepare educational materials on the interface between chemical technology and society for use by chemical-engineering or chemistry professors

Doudna, Jennifer A.

336

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

Toxicology, Hydrogeology, Industrial Engineering, Materials Science and Engineering, Mathematical Sciences58 College of Engineering and Science 58 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems

Stuart, Steven J.

337

BIOMEDICAL ENGINEERING CHEMICAL AND BIOLOGICAL ENGINEERING  

E-Print Network [OSTI]

BIOMEDICAL ENGINEERING CHEMICAL AND BIOLOGICAL ENGINEERING CIVIL, ARCHITECTURAL, AND ENVIRONMENTAL Experience. DEPARTMENT OF BIOMEDICAL ENGINEERING · Degree programs in cell and tissue engineering, medical imaging, and neural engineering These are exciting times for biomedical engineering and for Illinois Tech

Heller, Barbara

338

Ambient illumination revisited: A new adaptation-based approach for optimizing medical imaging reading environments  

SciTech Connect (OSTI)

Ambient lighting in soft-copy reading rooms is currently kept at low values to preserve contrast rendition in the dark regions of a medical image. Low illuminance levels, however, create inadequate viewing conditions and may also cause eye strain. This eye strain may be potentially attributed to notable variations in the luminance adaptation state of the reader's eyes when moving the gaze intermittently between the brighter display and darker surrounding surfaces. This paper presents a methodology to minimize this variation and optimize the lighting conditions of reading rooms by exploiting the properties of liquid crystal displays (LCDs) with low diffuse reflection coefficients and high luminance ratio. First, a computational model was developed to determine a global luminance adaptation value, L{sub adp}, when viewing a medical image on display. The model is based on the diameter of the pupil size, which depends on the luminance of the observed object. Second, this value was compared with the luminance reflected off surrounding surfaces, L{sub s}, under various conditions of room illuminance, E, different values of diffuse reflection coefficients of surrounding surfaces, R{sub s}, and calibration settings of a typical LCD. The results suggest that for typical luminance settings of current LCDs, it is possible to raise ambient illumination to minimize differences in eye adaptation, potentially reducing visual fatigue while also complying with the TG18 specifications for controlled contrast rendition. Specifically, room illumination in the 75-150 lux range and surface diffuse reflection coefficients in the practical range of 0.13-0.22 sr{sup -1} provide an ideal setup for typical LCDs. Future LCDs with lower diffuse reflectivity and with higher inherent luminance ratios can provide further improvement of ergonomic viewing conditions in reading rooms.

Chawla, Amarpreet S.; Samei, Ehsan [Duke Advanced Imaging Laboratories, Departments of Radiology and Biomedical Engineering, Duke University, Durham, North Carolina 27705 (United States); Duke Advanced Imaging Laboratories, Departments of Radiology, Physics, Medical Physics, and Biomedical Engineering, Duke University, Durham, North Carolina 27705 (United States)

2007-01-15T23:59:59.000Z

339

International Phenomenological Society On Nominalism  

E-Print Network [OSTI]

International Phenomenological Society On Nominalism Author(s): Geoffrey Hellman Source: Philosophy and Phenomenological Research, Vol. 62, No. 3 (May, 2001), pp. 691-705 Published by: International Phenomenological contact support@jstor.org. . International Phenomenological Society is collaborating with JSTOR

Hellman, Geoffrey

340

CollegeofEngineering College of Engineering  

E-Print Network [OSTI]

Engineering, Neural Engineering, Bioinformatics and Genomics, and Nanobiomolecular Engineering targeting and transport, biotransduc- tion, imaging and inducible bioactivity, computational genomics

Illinois at Chicago, University of

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Engineering Economics  

Science Journals Connector (OSTI)

The purpose of these review notes is to provide a refresher in the major topics of Engineering Economics. Engineering economics deals with determining from a number of technically acceptable alternatives the o...

1998-01-01T23:59:59.000Z

342

Biomedical Engineering  

E-Print Network [OSTI]

#12;Biomedical Engineering Dr. Kevin Lear, Director, Undergraduate Program Ms. Brett Eppich Beal Professor of Biomedical Sciences Associate Director ­ Kevin Lear Professor of Electrical & Computer Scott ­ Director, Regulatory Affairs Interdisciplinary Program #12;Biomedical Engineering at CSU

343

ALS Ceramics Materials Research Advances Engine Performance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ALS Ceramics Materials Research ALS Ceramics Materials Research Advances Engine Performance ALS Ceramics Materials Research Advances Engine Performance Print Thursday, 27 September 2012 00:00 LBNL senior materials scientist and UC Berkeley professor Rob Ritchie has been researching the fracture behavior of a wide array of materials for the past 40 years, the last ten of them using the facilities at the ALS. From human bone to synthetic engineering materials such as shape-memory metals and composites, Ritchie has illuminated groundbreaking cracking patterns and the underlying mechanistic processes using the x-ray synchrotron micro-tomography at ALS Beamline 8.3.2. Summary Slide ritchie ceramics This 3D image of a ceramic composite specimen imaged under load at 1750C shows the detailed fracture patterns that researchers are able to view using ALS Beamline 8.3.2. The vertical white lines are the individual silicon carbide fibers in this sample about 500 microns in diameter.

344

Engineering Thermodynamics  

Science Journals Connector (OSTI)

... republication of works by American authors) to give a rigorous treatment of fundamental and applied thermodynamics for the engineering student.

J. H. HORLOCK

1958-04-12T23:59:59.000Z

345

Value Engineering  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish Department of Energy (DOE) value engineering policy that establishs and maintains cost-effective value procedures and processes.

2002-12-30T23:59:59.000Z

346

Engineers march  

Science Journals Connector (OSTI)

... profession in Britain, is the latest body to put forward its recipe for improving the competitiveness of British industry. It believes that companies' attitudes towards investment in new technologies would ... militancy among engineers in Britain. Many believe that their profession is undervalued, and that provision for education in some areas, particularly production engineering, is inadequate. Launching the Engineering ...

Tim Beardsley

1983-10-06T23:59:59.000Z

347

Introduction Engineering  

E-Print Network [OSTI]

Spatial Design Architectural Planning, History and Theory Engineering of Building Structures Architectural34 Introduction Guide Entrance Life Career Inquiries Engineering Graduate School/ Faculty of Engineering of Kobe University have developed a very wide spectrum of education and research in the fields

Banbara, Mutsunori

348

Environmental Engineering  

E-Print Network [OSTI]

and human origins. Civil and Environmental Engineers create, con- struct, and manage the infrastructure water and air pollution as well as industrial and hazardous waste management. They monitor the quality, construc- tion, transportation, environmental engineering, and water resources. The Structural Engineering

Wang, Hai

349

Meetings and Societies  

Science Journals Connector (OSTI)

...Optometry, annual, Houston, Tex. (C. C. Koch, 1506 Foshay Tower, Minneapolis 2. Minn.) SCIENCE, VOL. 124 Conquest of the...Automotive Engineers, annual, Detroit, Mich. (Meetings Div., SAE, 29 W. 39 St., New York 18.) 14-20. Indian Science Cong...

1956-11-09T23:59:59.000Z

350

Meetings and Societies  

Science Journals Connector (OSTI)

...annual, Chicago, Ill. (C. C. Koch, 1506-1508 Foshay Tower, Minneapolis 2, Minn.) 5-7. Texas Acad. of Science...Automotive Engi-neers, annual, Detroit, Mich. (Meetings Div., SAE, 29 W. 39 St., New York 18.)22-24. American Council...

1957-11-08T23:59:59.000Z

351

Meetings and Societies  

Science Journals Connector (OSTI)

...Panama, Guate-mala; E. E. Howe, Merck and Company; D. B. Tower, National Institutes of Health; and J. B. Allison, Rutgers...Automotive Engineers, annual, Detroit, Mich. (Meetings Div., SAE, 29 W. 39 St., New York 18.) 14-20. Indian Science Cong...

1956-12-14T23:59:59.000Z

352

Meetings and Societies  

Science Journals Connector (OSTI)

...Elvin Liverman, University of Connecticut; "Linguistics and the language...Monroe E. Spaght, 1125 Shell Oil Company, 27 Dec., noon...27-29. American Soc. of Heating and Air-Conditioning Engineers...and suction pump and others. Prices from $200.00 Bulletin SBR...

1957-11-29T23:59:59.000Z

353

Multiple Sclerosis Society (Grant Tracker) Multiple Sclerosis Society (Grant Tracker) applicant guide June 2012 Page 1  

E-Print Network [OSTI]

Multiple Sclerosis Society (Grant Tracker) Multiple Sclerosis Society (Grant Tracker) applicant guide June 2012 Page 1 2012 INTERNAL USER GUIDE A Guide to the Multiple Sclerosis Society Grant Tracker Society web page: http://www.mssociety.org.uk/ #12;Multiple Sclerosis Society (Grant Tracker) Multiple

354

http://hfs.sagepub.com/ Ergonomics Society  

E-Print Network [OSTI]

http://hfs.sagepub.com/ Ergonomics Society of the Human Factors and Human Factors: The Journal http: 517Human Factors: The Journal of the Human Factors and Ergonomics Society and Raja Parasuraman Peter A of: Human Factors and Ergonomics Society can be found at:Society Human Factors: The Journal

Parasuraman, Raja

355

http://hfs.sagepub.com/ Ergonomics Society  

E-Print Network [OSTI]

http://hfs.sagepub.com/ Ergonomics Society of the Human Factors and Human Factors: The Journal http: 411Human Factors: The Journal of the Human Factors and Ergonomics Society Ericka Rovira and Raja and Ergonomics Society can be found at:Society Human Factors: The Journal of the Human Factors and Ergonomics

Parasuraman, Raja

356

http://hfs.sagepub.com/ Ergonomics Society  

E-Print Network [OSTI]

http://hfs.sagepub.com/ Ergonomics Society of the Human Factors and Human Factors: The Journal http.1177/0018720813495279 2013 published online 8 JulyHuman Factors: The Journal of the Human Factors and Ergonomics Society Yu://www.sagepublications.com On behalf of: Human Factors and Ergonomics Society can be found at:Society Human Factors: The Journal

Kaber, David B.

357

Bakerian Lecture. Some Problems in Connexion with the Development of a High Speed Diesel Engine  

Science Journals Connector (OSTI)

27 May 1948 research-article Bakerian Lecture. Some Problems in Connexion with the Development of a High Speed Diesel Engine H. R. Ricardo The Royal Society is collaborating with JSTOR to digitize, preserve, and extend access to Proceedings...

1948-01-01T23:59:59.000Z

358

Geochemical Society and the Mineralogical Society of America  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Society and the Mineralogical Society of America Society and the Mineralogical Society of America Reviews in Mineralogy and Geochemistry (2006) Volume 63 Neutron Scattering in Earth Sciences Hans-Rudolf Wenk (Editor) (Click text for link. * Means no presentation available.) Short Course Presentations Chapter 1: Introduction to Neutron Properties and Applications. By John B. Parise *Chapter 2: Neutron Production, Neutron Facilities and Neutron Instrumentation. By Sven C. Vogel and Hans-Georg Priesmeyer Chapter 3: Single-Crystal Neutron Diffraction: Present and Future Applications. By Nancy L. Ross and Christina Hoffman Chapter 4: Neutron Rietveld Refinement. By Robert B. Von Dreele Chapter 5: Application of Neutron Powder-Diffraction to Mineral Structures. By Karsten Knorr and Wulf Depmeier

359

Supporting Information for Screening-engineered Field-effect Solar Cells  

E-Print Network [OSTI]

Supporting Information for Screening-engineered Field-effect Solar Cells William Regan1,2, , Steven of efficiency and Voc as a function of finger separation s Figure S2. Simulated IV curves (AM1.5 illumination includes: Supporting Methods: I.A: Simulation methods for type A cells I.B: Simulation methods for type B

Zettl, Alex

360

engineering LETTER FROM THE DEAN  

E-Print Network [OSTI]

.................................................................... ENGINEERING MECHANICS.................................................... INDUSTRIAL ENGINEERING ENGINEERING EARTH & ENVIRONMENTAL ENGINEERING ELECTRICAL ENGINEERING INDUSTRIAL ENGINEERING & OPERATIONSexploring columbia engineering majors #12;LETTER FROM THE DEAN Making a decision about your

Hone, James

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Engineer, Sandia National Laboratories | National Nuclear Security  

National Nuclear Security Administration (NNSA)

Sandra Begay-Campbell Sandra Begay-Campbell Engineer, Sandia National Laboratories Sandra Begay-Campbell Sandra Begay-Campbell Role: Engineer, Sandia National Laboratories Award: Ely S. Parker Award Profile: Sandra Begay-Campbell, a Sandia National Laboratories engineer and a member of the Navajo Nation, was selected for the prestigious Ely S. Parker Award by the American Indian Science and Engineering Society at an honors banquet Oct. 31 in Portland, Ore. Begay-Campbell, who has worked at Sandia for 17 years and is a principal member of the technical staff, received the Lifetime Achievement Award, AISES's highest honor, which recognizes American Indians who have "made significant long-term contributions in the sciences, mathematics, engineering, technology, health, or related fields."

362

Mathematics and Engineering Mathematics & Engineering Orientation  

E-Print Network [OSTI]

Mathematics and Engineering Mathematics & Engineering Orientation Evening Thursday, January 20, 2011 WELCOME! #12;Mathematics and Engineering Mathematics& EngineeringOrientationProgram Thursday,January20, 2011 1. Program Presentation · Welcome · What is Mathematics & Engineering ? · Why Mathematics

Linder, Tamás

363

Whitacre College of Engineering Industrial Engineering Department  

E-Print Network [OSTI]

Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

Gelfond, Michael

364

Virtual edge illumination and one dimensional beam tracking for absorption, refraction, and scattering retrieval  

SciTech Connect (OSTI)

We propose two different approaches to retrieve x-ray absorption, refraction, and scattering signals using a one dimensional scan and a high resolution detector. The first method can be easily implemented in existing procedures developed for edge illumination to retrieve absorption and refraction signals, giving comparable image quality while reducing exposure time and delivered dose. The second method tracks the variations of the beam intensity profile on the detector through a multi-Gaussian interpolation, allowing the additional retrieval of the scattering signal.

Vittoria, Fabio A., E-mail: fabio.vittoria.12@ucl.ac.uk; Diemoz, Paul C. [Department of Medical Physics and Bioengineering, University College London, Malet Place, Gower Street, London WC1E 6BT (United Kingdom); Research Complex at Harwell, Harwell Oxford Campus, OX11 0FA Didcot (United Kingdom); Endrizzi, Marco; Olivo, Alessandro [Department of Medical Physics and Bioengineering, University College London, Malet Place, Gower Street, London WC1E 6BT (United Kingdom); Wagner, Ulrich H.; Rau, Christoph [Diamond Light Source, Harwell Oxford Campus, OX11 0DE Didcot (United Kingdom); Robinson, Ian K. [Research Complex at Harwell, Harwell Oxford Campus, OX11 0FA Didcot (United Kingdom); London Centre for Nanotechnology, WC1H 0AH London (United Kingdom)

2014-03-31T23:59:59.000Z

365

Detection of single quantum dots in model organisms with sheet illumination microscopy  

SciTech Connect (OSTI)

Single-molecule detection and tracking is important for observing biomolecule interactions in the microenvironment. Here we report selective plane illumination microscopy (SPIM) with single-molecule detection in living organisms, which enables fast imaging and single-molecule tracking and optical penetration beyond 300 {mu}m. We detected single nanocrystals in Drosophila larvae and zebrafish embryo. We also report our first tracking of single quantum dots during zebrafish development, which displays a transition from flow to confined motion prior to the blastula stage. The new SPIM setup represents a new technique, which enables fast single-molecule imaging and tracking in living systems.

Friedrich, Mike; Nozadze, Revaz; Gan, Qiang; Zelman-Femiak, Monika; Ermolayev, Vladimir [Molecular Microscopy Group, Rudolf Virchow Center, University of Wuerzburg, Versbacher Str. 9, D-97078 Wuerzburg (Germany)] [Molecular Microscopy Group, Rudolf Virchow Center, University of Wuerzburg, Versbacher Str. 9, D-97078 Wuerzburg (Germany); Wagner, Toni U. [Institute of Physiological Chemistry I, Biocenter, University of Wuerzburg, Am Hubland, D-97074 Wuerzburg (Germany)] [Institute of Physiological Chemistry I, Biocenter, University of Wuerzburg, Am Hubland, D-97074 Wuerzburg (Germany); Harms, Gregory S., E-mail: gregory.harms@virchow.uni-wuerzburg.de [Molecular Microscopy Group, Rudolf Virchow Center, University of Wuerzburg, Versbacher Str. 9, D-97078 Wuerzburg (Germany)

2009-12-18T23:59:59.000Z

366

Geek-Up[05.06.2011]: Engines, Quasars and Maps | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

05.06.2011]: Engines, Quasars and Maps 05.06.2011]: Engines, Quasars and Maps Geek-Up[05.06.2011]: Engines, Quasars and Maps May 6, 2011 - 5:24pm Addthis A slice through the three-dimensional map of the universe. | Photo Courtesy of A. Slosar and the SDSS-III collaboration. A slice through the three-dimensional map of the universe. | Photo Courtesy of A. Slosar and the SDSS-III collaboration. Niketa Kumar Niketa Kumar Public Affairs Specialist, Office of Public Affairs What are the key facts? A typical gas engine is only about 20 percent efficient (compared to diesel engines that can reach 40 percent efficiency), gasoline engines are cleaner than diesel ones. Engineers are working on a cleaner, more efficient diesel-gas engine Scientists created the largest 3D map of the distant universe by using the light of quasars to illuminate clouds of intergalactic hydrogen.

367

Soil Science Society of America Journal Soil Sci. Soc. Am. J.  

E-Print Network [OSTI]

. Larson Dep. of Aerospace Engineering Sciences Univ. of Colorado Boulder, CO 80309 Eni G. Njoku Jet security. Large-scale soil moisture monitoring has advanced in recent years, creating opportunitiesSoil Science Society of America Journal Soil Sci. Soc. Am. J. doi:10.2136/sssaj2013

Small, Eric

368

Nanotechnology and Society: A discussion-based undergraduate course  

Science Journals Connector (OSTI)

Nanotechnology has emerged as a broad exciting yet ill-defined field of scientific research and technological innovation. There are important questions about the technologys potential economic social and environmental implications. We discuss an undergraduate course on nanoscience and nanotechnology for students from a wide range of disciplines including the natural and social sciences the humanities and engineering. The course explores these questions and the broader place of technology in contemporary societies. The course is built around active learning methods and seeks to develop the students critical thinking skills written and verbal communication abilities and general knowledge of nanoscience and nanoengineering concepts. Continuous assessment was used to gain information about the effectiveness of class discussions and enhancement of student understanding of the interaction between nanotechnology and society.

Charles Tahan; Ricky Leung; G. M. Zenner; K. D. Ellison; W. C. Crone; Clark A. Miller

2006-01-01T23:59:59.000Z

369

General Engineers  

U.S. Energy Information Administration (EIA) Indexed Site

General Engineers General Engineers The U.S. Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the General Engineer, whose work is associated with analytical studies and evaluation projects pertaining to the operations of the energy industry. Responsibilities: General Engineers perform or participate in one or more of the following important functions: * Design modeling systems to represent energy markets and the physical properties of energy industries * Conceive, initiate, monitor and/or conduct planning and evaluation projects and studies of continuing and future

370

General Engineer  

Broader source: Energy.gov [DOE]

This position is located in the Construction Management and Inspection, Testing and Energization, Engineering and Technical Transmission Services, Transmission Services Organization. Additional...

371

Electrical Engineer  

Broader source: Energy.gov [DOE]

(See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration, Upper Great Plains Region, Maintenance, Engineering, (B5500), Huron, SD or...

372

Electrical Engineer  

Broader source: Energy.gov [DOE]

(See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration, Upper Great Plains Region, Maintenance, Engineering, (B5500) Huron, SD Find out...

373

Rule Engine.  

E-Print Network [OSTI]

?? This project is a study of the development of the Rule Engine, which is a validation system for quality assurance of product data used (more)

Eriksen, ystein

2007-01-01T23:59:59.000Z

374

Numerical analysis of the direct drive illumination uniformity for the Laser MegaJoule facility  

SciTech Connect (OSTI)

The illumination uniformity provided during the initial imprinting phase of the laser foot pulse in a direct drive scenario at the Laser MegaJoule facility has been analyzed. This study analyzes the quality of the illumination of a spherical capsule and concerns the uniformity of the first shock generate in the absorber of an Inertial Confinement Fusion capsule. Four configurations making use of all or some of the 80 laser beams organized in the 20 quads of the cones at 49 and 131 with respect to the polar axis have been considered in order to assemble the foot pulse. Elliptical and circular super-gaussian laser intensity profiles taking into account beam-to-beam power imbalance (10%), pointing error (50??m), and target positioning (20??m) have been considered. It has been found that the use of the Polar Direct Drive technique can in some cases reduce the irradiation non-uniformity by a factor as high as 50%. In all cases, elliptical profile provides better results in comparison with the circular one and it is shown that the minimum of the non-uniformity is also a function of the capsule radius.

Temporal, M., E-mail: mauro.temporal@hotmail.com [Centre de Mathmatiques et de Leurs Applications, ENS Cachan and CNRS, 61 Av. du President Wilson, F-94235 Cachan Cedex (France); Canaud, B. [CEA, DIF, F-91297 Arpajon Cedex (France)] [CEA, DIF, F-91297 Arpajon Cedex (France); Garbett, W. J. [AWE plc, Aldermaston, Reading, Berkshire RG7 4PR (United Kingdom)] [AWE plc, Aldermaston, Reading, Berkshire RG7 4PR (United Kingdom); Ramis, R. [ETSI Aeronuticos, Universidad Politcnica de Madrid, 28040 Madrid (Spain)] [ETSI Aeronuticos, Universidad Politcnica de Madrid, 28040 Madrid (Spain)

2014-01-15T23:59:59.000Z

375

Large-solid-angle illuminators for extreme ultraviolet lithography with laser plasmas  

SciTech Connect (OSTI)

Laser Plasma Sources (LPSS) of extreme ultraviolet radiation are an attractive alternative to synchrotron radiation sources for extreme ultraviolet lithography (EUVL) due to their modularity, brightness, and modest size and cost. To fully exploit the extreme ultraviolet power emitted by such sources, it is necessary to capture the largest possible fraction of the source emission half-sphere while simultaneously optimizing the illumination stationarity and uniformity on the object mask. In this LDRD project, laser plasma source illumination systems for EUVL have been designed and then theoretically and experimentally characterized. Ellipsoidal condensers have been found to be simple yet extremely efficient condensers for small-field EUVL imaging systems. The effects of aberrations in such condensers on extreme ultraviolet (EUV) imaging have been studied with physical optics modeling. Lastly, the design of an efficient large-solid-angle condenser has been completed. It collects 50% of the available laser plasma source power at 14 nm and delivers it properly to the object mask in a wide-arc-field camera.

Kubiak, G.D.; Tichenor, D.A. [Sandia National Labs., Livermore, CA (United States); Sweatt, W.C.; Chow, W.W. [Sandia National Labs., Albuquerque, NM (United States)

1995-06-01T23:59:59.000Z

376

Industrial and Systems engineering  

E-Print Network [OSTI]

Industrial and Systems engineering COLLEGE of ENGINEERING DepartmentofIndustrialandSystemsEngineering EDGE Engineering Entrepreneur Certificate Program is a great addition to an industrial and systems to expert clinical recommendations. engineering.wayne.edu/isefaculty Industrial and systems engineering

Berdichevsky, Victor

377

School Overview Engineers use science, imagination, and experience to create products and services that benefit the whole of  

E-Print Network [OSTI]

School Overview Engineers use science, imagination, and experience to create products and services by advances in engineering -- from the Stone Age to the Information Age. These advances have allowed society to shift its focus from survival to cultural enrichment. You see the products of engineers around you every

Rose, Michael R.

378

Department of Aerospace Engineering  

E-Print Network [OSTI]

ELECTIVE COURSE SELECTIONS .................................5 DEPARTMENT OF AEROSPACE ENGINEERING PROGRAM AEROSPACE ENGINEERING COOPERATIVE ED & INTERNSHIP PROGRAM...................22 AEROSPACE ENGINEERING CO

379

College of Engineering and Science ENGINEERING AND  

E-Print Network [OSTI]

Engineering, Industrial Engineering, and Mechanical Engineering are each accredited by the Engineering88 College of Engineering and Science 88 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaureate programs that provide

Stuart, Steven J.

380

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

Engineering, Industrial Engineering, and Mechanical Engineering are each accredited by the Engineering84 College of Engineering and Science 84 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which

Stuart, Steven J.

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

, Electrical Engineering, Industrial Engineering, and Mechanical Engineering are each accredited81 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering.clemson.edu. Minors Engineering and science students can complement their majors by selecting minor concentrations

Stuart, Steven J.

382

Biomedical Engineering Department of Biomedical Engineering  

E-Print Network [OSTI]

Biomedical Engineering Department of Biomedical Engineering Wishnick Hall 3255 S. Dearborn Chicago of Biomedical Engineering confers a doctoral degree in biomedical engineering (Ph.D. in Biomedical Engineering with engineering backgrounds can receive a Ph.D. in Biomedical Engineering at IIT and an M.D. from the University

Heller, Barbara

383

Mechanical Engineering 1 Faculty of engineering, Department of  

E-Print Network [OSTI]

Engineering with Nuclear Engineering The Mechanical Engineering Department (ME), along with those of Chemical in nuclear engineering. The degree title will be "MEng in Mechanical Engineering with Nuclear EngineeringMechanical Engineering 1 Faculty of engineering, Department of --Mechanical Engineering

384

Society of Automotive Engineers honors Storey, Wagner, Sluder...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for pioneering new techniques in the characterization of particulate matter and exhaust emissions and for leading a critical sub-committee for the diesel fuel sulfur...

385

IEEE: A Policy Challenge for Big Engineering Society  

Science Journals Connector (OSTI)

...Strippers Celebrated "Coal has always cursed the...including people from the coal lands of Appalachia and the West, gath-ered...any mem-bers of the coal industry present, the...The bill, the Surface Mining Control and Reclamation...

JOHN WALSH

1977-08-19T23:59:59.000Z

386

IEEE POWER ENGINEERING SOCIETY ENERGY DEVELOPMENT AND POWER GENERATION COMMITTEE  

E-Print Network [OSTI]

--Price Cap Regulation: Stimulating Efficiency in Electricity Distribution in Latin America. (Luiz Barroso Sponsored by: International Practices for Energy Development and Power Generation Chairs: Luiz Barroso, PSR

Catholic University of Chile (Universidad Católica de Chile)

387

Tropical Residual Soils Geological Society Engineering Group Working Party Report  

Science Journals Connector (OSTI)

...Clanan, M. B. 1982. Settlement of a tower on residual soil. Proceedings of Conference...i trench [ ] ~-~=___ ,~'A dolly ;' ;i i [ l Jacking undisturbed core-cutter sampler. excavation...

388

American Society of Mechanical Engineers/Savannah River National...  

Broader source: Energy.gov (indexed) [DOE]

for Hydrogen Infrastructure Codes and Standards Workshop and the DOE Hydrogen Pipeline Working Group Workshop Sponsored by SRNL, ASME, and DOE Center for Hydrogen Research,...

389

Engineering Group of the Geological Society, 198384  

Science Journals Connector (OSTI)

...submarine communications systems. A. H. Clinton (Cable and Wireless PLC, London). The high cost of submersible plant, its...Keyworth, Nottingham). A 2000MW DC link with the French electricity system is planned, with both sides connected by eight cables...

390

CSCEComputer Engineering  

E-Print Network [OSTI]

CSCEComputer Science & Engineering #12;Computer scientists and computer engineers design- tual reality and robotics. Within the Computer Science department, we offer four exciting majors from the tools necessary for success in a wide ar- ray of industrial careers. The Computer Science (CSCI) program

Wang, Hai

391

University , Engineering  

E-Print Network [OSTI]

, Princeton Plasma Physics Laboratory Presented at Seminar of Department of Nuclear Engineering Massachusetts MA PRINCETON PLASMA PHYSICS LABORATORY PPPL 1 #12; Abstract Dynamically balanced design concept, Department of Nuclear Engineering, MIT , Feb.26, 2001, Cambridge MA PRINCETON PLASMA PHYSICS LABORATORY PPPL

Zakharov, Leonid E.

392

Mechanical and Manufacturing Engineering Mechatronics Engineering Minor  

E-Print Network [OSTI]

Mechanical and Manufacturing Engineering Mechatronics Engineering Minor Students pursuing a BSc in mechanical or manufacturing engineering have experience and entrepreneurship. Mechatronics is the synergistic combination of mechanical

Calgary, University of

393

Sandia National Laboratories: American Chemical SocietyInternational...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials LaboratoryAmerican Chemical Society International-Domestic Student Summit American Chemical Society International-Domestic Student Summit...

394

American Physical Society Honors Decker  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

APS Lights the Way to 2012 Chemistry Nobel APS Lights the Way to 2012 Chemistry Nobel APS X-rays Reveal Picasso's Secret DCS and APS Sign MOU The APS and the 2012 Argonne Energy Showcase Argonne Acoustic Levitation Video Goes Viral APS News Archives: 2012 | 2011 | 2010 | 2009 2008 | 2007 | 2006 | 2005 2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed American Physical Society Honors Decker NOVEMBER 19, 2012 Bookmark and Share Glenn Decker Senior Scientist Glenn Decker (APS) has been named a fellow of the American Physical Society, an honor limited to no more than one-half of one percent of the society's membership of more than 50,000. Decker's fellowship recognizes his "outstanding contributions to the design, commissioning, and enhancement of synchrotron light sources, and for innovative developments in the field of particle beam diagnostics. In

395

Proceedings of the 2003 American Society for Engineering Education Annual Conference & Exposition Copyright 2003, American Society for Engineering Education  

E-Print Network [OSTI]

; kostic@niu.edu; Web: www.kostic.niu.edu Figure 1: Discrete sampling of the motion of a bouncing ball-life examples are depicted and described in Figure 2: the "wagon wheel illusion," an appearance that a poked wheel rotates backward while it moves forward under certain combinations of rotation and lighting

Kostic, Milivoje M.

396

FACULTY OF ENGINEERING FALL Engineering  

E-Print Network [OSTI]

--TISED for short--builds on an existing sustainability endeavour called ISEAD (the Institute for Sustainability of sustainable engineering and design. A $10-million gift from alumnus Lorne Trottier, BEng'70, MEng'73, DSc'06 about sustainability issues. The Trottier Institute for Sustainability in Engineering and Design

Shoubridge, Eric

397

Predictive Modeling of a Homogeneous Charge Compression Ignition (HCCI) Engine with EGR Fueled with Diesel  

Science Journals Connector (OSTI)

Homogeneous charge compression ignition (HCCI) combustion integrates features of both spark ignition (SI) and compression ignition (CI) engines, obtaining a promisingly high efficiency in a diesel engine with virtually almost no NOx and soot emissions. ... The objective of the model is to simulate fundamental engine results such as combustion pressure, heat-release rate, indicated mean pressure (IMEP), gas temperature, and exhaust gas emission from easily measured engine parameters. ... Gordon, P. B. The Design and Simulation of a 4 Stroke Engine; Society of Automotive Engineers: Warrendale, PA, 1999. ...

Miguel Torres Garca; Fco Jimnez-Espadafor Aguilar; Elisa Carvajal Trujillo; Jos Antonio Becerra Villanueva

2009-09-10T23:59:59.000Z

398

Joint Computer Science Department and Electrical and Computer Engineering Department Special Seminar Sponsored by ISTeC  

E-Print Network [OSTI]

Joint Computer Science Department and Electrical and Computer Engineering Security Professor of Computer Science (College of Science) Tue., Sept. 16 IEEE, ACM, NSA and NIST such as the IEEE Computer Society's Technical

399

Modeling of contact between liner finish and piston ring in internal combustion engines based on 3D measured surface  

E-Print Network [OSTI]

When decreasing of fossil fuel supplies and air pollution are two major society problems in the 21st century, rapid growth of internal combustion (IC) engines serves as a main producer of these two problems. In order to ...

Zhao, Qing, S.M. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

400

http://hfs.sagepub.com/ Ergonomics Society  

E-Print Network [OSTI]

http://hfs.sagepub.com/ Ergonomics Society of the Human Factors and Human Factors: The Journal http: 381Human Factors: The Journal of the Human Factors and Ergonomics Society Raja Parasuraman: http://www.sagepublications.com On behalf of: Human Factors and Ergonomics Society can be found at

Parasuraman, Raja

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

PROGRAM MANAGER CENTER FOR NANOTECHNOLOGY IN SOCIETY  

E-Print Network [OSTI]

PROGRAM MANAGER CENTER FOR NANOTECHNOLOGY IN SOCIETY AT ARIZONA STATE UNIVERSITY The Center for Nanotechnology in Society at Arizona State University (CNS-ASU) seeks a Program Manager to organize and coordinate activities, programs, and projects for the Center for Nanotechnology in Society (CNS) at Arizona

Colorado at Boulder, University of

402

The New Home of the Royal Society  

Science Journals Connector (OSTI)

1 September 1967 research-article The New Home of the Royal Society Lord Holford The Royal Society is collaborating with JSTOR to digitize, preserve, and extend access to Notes and Records of the Royal Society of London. www.jstor.org

1967-01-01T23:59:59.000Z

403

Former Homes of the Royal Society  

Science Journals Connector (OSTI)

1 September 1967 research-article Former Homes of the Royal Society D. C. Martin The Royal Society is collaborating with JSTOR to digitize, preserve, and extend access to Notes and Records of the Royal Society of London. www.jstor.org

1967-01-01T23:59:59.000Z

404

College of Engineering and Science ENGINEERING  

E-Print Network [OSTI]

- ing, Electrical Engineering, Industrial Engineering, and Mechanical Engineering are each accredited80 College of Engineering and Science 80 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which

Stuart, Steven J.

405

Engineering 10 Engineering Design and Analysis  

E-Print Network [OSTI]

in hands-on, creative engineering projects; · provide an introduction to different fields of engineering1 Engineering 10 Engineering Design and Analysis Spring, 2009 Faculty Alice Agogino, Mechanical Engineering, Lecture Section 1, 2 Ray Seed, Civil and Environmental Engineering, Lecture Section 3 Xin Guo

Agogino, Alice M.

406

Mechanical and Manufacturing Engineering Petroleum Engineering Minor  

E-Print Network [OSTI]

Mechanical and Manufacturing Engineering Petroleum Engineering Minor The Department of Mechanical and Manufacturing Engineering offers a minor in petroleum engineering within the mechanical engineering major program. This minor builds on the fundamentals provided by a basis in mechanical engineering and adds

Calgary, University of

407

Large Diesel Engine Lubrication  

Science Journals Connector (OSTI)

Centralized lubrication for slow-speed internal combustion engines ; Marine diesel engine lubrication ...

Hans Gaca; Jan Ruiter; Gtz Mehr; Theo Mang

2014-01-01T23:59:59.000Z

408

Combustion Engine  

Broader source: Energy.gov [DOE]

Pictured here is an animation showing the basic mechanics of how an internal combustion engine works. With support from the Energy Department, General Motors researchers developed a new technology ...

409

Hands-on Learning CU architectural engineering students learn their trade  

E-Print Network [OSTI]

systems to distribute power within buildings. As a specialty in electrical systems, the lighting program engineering students help solve many challenges of society: energy needs, building systems, urban development, and community planning. Architectural engineers are leading users of sophisticated high-tech products, including

410

THE USC VITERBI SCHOOL OF ENGINEERING IS A GREAT PLACE TO  

E-Print Network [OSTI]

and Terrorism, National Defense ENERGY Nano Solar Tech., New Fuels & Engines, Ocean Wave Energy, Transportation's problems. Leading areas of research at USC include biomimetic microelectronic systems, alternative energy;Engineering is the enabling discipline of our time. Your solutions for the problems facing our future society

Zhou, Chongwu

411

John T. Mihalczo PhD. in Nuclear Engineering : University of Tennessee, 1970  

E-Print Network [OSTI]

John T. Mihalczo PhD. in Nuclear Engineering : University of Tennessee, 1970 Masters in Physics in Nuclear Engineering at the University of Tennessee, Knoxville in 1970. · 40 years experience in measurements with fissile materials. · Fellow of American Nuclear Society. Recent work in Arms Control

412

COMPUTER ENGINEERING EECS Department  

E-Print Network [OSTI]

COMPUTER ENGINEERING EECS Department The Electrical Engineering and Computer Science (EECS) Department at WSU offers undergraduate degrees in electrical engineering, computer engineering and computer science. The EECS Department offers Master of Science degrees in computer science, electrical engineering

413

and Industrial Engineering  

E-Print Network [OSTI]

45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle to prosthetic limbs to windmills, and their myriad components. Industrial engineers are concerned

Mountziaris, T. J.

414

ELECTRICAL ENGINEERING EECS Department  

E-Print Network [OSTI]

ELECTRICAL ENGINEERING EECS Department The Electrical Engineering and Computer Science (EECS) Department at WSU offers undergraduate degrees in electrical engineering, computer engineering and computer science. The EECS Department offers master of science degrees in computer science, electrical engineering

415

MECHANICAL ENGINEERING Ross Schlueter  

E-Print Network [OSTI]

MECHANICAL ENGINEERING Ross Schlueter Engineering Deputy For Mechanical Engineering Russ Wells Mechanical Engineering Department Deputy ELECTRONICS, SOFTWARE & INSTRUMENTATION ENGINEERING Henrik von Der Sen Mechanical Admin. Assist. Joan Wolter Electronics Admin. Assist. Marilyn Wong Division Admin

416

Department of Biomedical Engineering  

E-Print Network [OSTI]

Department of Biomedical Engineering Undergraduate Studies Manual 2011­2012 #12;Biomedical Introduction to Biomedical Engineering 3 Biomedical Engineering at Washington University 4 Career Opportunities 5 Core Curriculum 6 Biomedical Engineering Electives 7 School of Engineering Electives 8 Sample

Stormo, Gary

417

Department of Biomedical Engineering  

E-Print Network [OSTI]

Department of Biomedical Engineering Undergraduate Studies Manual 2012­2013 #12;Biomedical Introduction to Biomedical Engineering 3 Biomedical Engineering at Washington University 4 Career Opportunities 5 Core Curriculum 6 Biomedical Engineering Electives 7 School of Engineering Electives 8 Sample

Stormo, Gary

418

Optimization of an Irreversible Diesel Cycle: Experimental Results of a Ceramic Coated Indirect-Injection Supercharged Diesel Engine  

Science Journals Connector (OSTI)

Technical Education Faculty and Department of Mechanical Engineering, Sakarya University, Esentepe 54187, Sakarya, Turkey, and Maritime Faculty, Marine Engineering, Istanbul Technical University, Tuzla, Turkey ... Effects of a ceramic coating on performance and exhaust emissions in the LHR engine have been compared to those obtained from the standard (STD) diesel engine based on the comparison of the STD and the LHR engines for identical airflow and brake mean effective pressure. ... Gataowski, J. A. Evaluation of a selectively-cooled single-cylinder 0.5-L Diesel engine; SAE paper No. 900693, Society of Automotive Engineers: Warrendale, PA, 1990. ...

A. Parlak; H. Yasar; H. S. Soyhan; C. Deniz

2008-04-25T23:59:59.000Z

419

The Royal Society Anniversary Meeting  

Science Journals Connector (OSTI)

... hope to make for the furthering of research should keep suitably in sight the whole ambit of the Society's purview of natural knowledge, thus making for advance over a ... shall not teach; the sole restriction laid down is that to research shall their main energies be devoted.

1923-12-08T23:59:59.000Z

420

IEEE Computer Society 1986 , 1988  

E-Print Network [OSTI]

Society Golden Core Member 226 NEDO NEDO , IT , , JSTJSPSJAXA ES,, , ES2 , IEEE,, ACM Conf.PC, 191 Year Total Cores Rmax Rpeak Effecie ncy (%) Power Mflops /Watt Proc. Proc. MH z OS Core s Sequoia BlueGene/Q, Power BQC 16C 1.60 GHz, Custom DOE/ NNSA /LLN L IBM 2011 1572864 16324751 20132659 81.09 7890 2069

Kasahara, Hironori

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Treasurer's Report to the Society  

Science Journals Connector (OSTI)

......prices for 1973. Because of this and several major items of expenditure which can be foreseen, the prospect of another large surplus...1. In real terms, the net result is that the Society's capital has just about maintained its value, in spite of the ravages......

I. M. James

1973-07-01T23:59:59.000Z

422

ROYAL SOCIETY OF SOUTH AFRICA  

E-Print Network [OSTI]

ROYAL SOCIETY OF SOUTH AFRICA http://www.royalsocietysa.org.za ACADEMY OF SCIENCE OF SOUTH AFRICA and distribution of butterflies in the atlas region (South Africa, Lesotho and Swaziland), thereby providing-ordinator of Africa's first butterfly atlas, entitled `The metamorphosis of the butterfly atlas' The Southern African

de Villiers, Marienne

423

6 7division of engineering & applied science WHO'S NEWWHO'S NEW  

E-Print Network [OSTI]

ceramics for energy-related applications, including thermal and environmental barrier coatings for power in support of conservation science. After receiving a BS in ceramic engineering, she earned an MS in ceramic Ceramic Society and Fellow of ASM International, the Charles E. MacQuigg Award for Outstanding Teaching

Tai, Yu-Chong

424

5 Questions for a Scientist: Materials Engineer David Forrest  

Office of Energy Efficiency and Renewable Energy (EERE)

David Forrest is one of many engineers at the Energy Department who are bringing innovative materials processes to commercial scale and helping manufacturers develop clean energy technologies that save energy, increase American competitiveness, and cut carbon pollution. Learn more about David, who was recently selected as a fellow by ASM International (formerly known as American Society for Metals) for his outstanding technical leadership.

425

Zelenay wins Electrochemical Society's Research Award  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrochemical Society's Research Award Electrochemical Society's Research Award Zelenay wins Electrochemical Society's Research Award The award includes a monetary prize and membership in the Electrochemical Society's Energy Technology Division. December 11, 2012 Piotr Zelenay Piotr Zelenay The award recognizes Zelenay's "outstanding and original contributions to the science and technology of energy-related research areas that include scientific and technological aspects of fossil fuels and alternative energy sources, energy management and environmental consequences of energy utilization." Piotr Zelenay of LANL's Sensors and Electrochemical Devices group has won the 2012 Research Award presented by the Energy Technology Division of The Electrochemical Society. The award recognizes Zelenay's "outstanding

426

Noise control versus shock and vibration engineering  

Science Journals Connector (OSTI)

Noise control and shock and vibration engineering have many fundamentals in common and many analogous practical constraints. Yet in many respects they tend to be opposite in methodology philosophy and past history. The present discussion is an attempt to present the point of view of the practicing engineer in either field who has some perspective on the historical origins of his art. It focuses on aspects that epitomize the practical objectives of such engineers plus any administrators lawyers etc. who may also be involved in team efforts. For noise control the aspects chosen are establishment of regulations monitoring and design or other actions intended to bring about compliance with regulations. For shock and vibration engineering they are establishment of environmental specifications to ensure reliability environmental testing in accordance with these and design or redesign to bring about compliance with test requirements and also (we hope) to bring about reliability without severe penalties in weight schedule or cost. This is not to say that these aspects in their barest sense represent all the technology or methodology that is pertinent or even that these limited aspects will be treated comprehensively. It is almost self?evident that the Acoustical Society of America should and does maintain beneficial relationship with medical psychological mechanical engineering and other societies that report their particular developing lore of fundamentals and some practical information from their particular viewpoint. The Acoustical Society is an important part of this spectrum by virtue of its interdisciplinary coverage extending through materials dynamics sound instrumentation and electronics to speech and hearing. But it is also worthwhile for the ASA by whatever means are available to sample the flavor of various disciplines as unified and value?weighted in accordance with typical practical objectives. For this reason the developing beneficial relationships with the Institute of Noise Control (INCE) and the Shock and Vibration Information Center (SVIC) will become increasingly important.

Charles T. Morrow

1974-01-01T23:59:59.000Z

427

ENGINEERS' DAY 2011 ACTIVITIES 1800 Engineering Hall, 1415 Engineering Drive  

E-Print Network [OSTI]

, Operations Support Exelon Nuclear Warrenville, Illinois Brian J. Rauch Vice President, Engineering John DeereENGINEERS' DAY 2011 ACTIVITIES 1800 Engineering Hall, 1415 Engineering Drive 5:30 SOCIAL HOUR · Distinguished Achievement Awards · Early-Career Achievement Award · College of Engineering faculty and staff

Sheridan, Jennifer

428

FACULTY OF ENGINEERING FALL Engineering  

E-Print Network [OSTI]

be significant," Mi says. Brochu's team engineers an advanced welding process Manipulating nanomaterials to applications having a static load, which is a significant constraint to their widespread use. Hydro-Québec Nano

Barthelat, Francois

429

s daylight begins to illuminate the countryside, a cold wind rustles through the leaves of the weedy rows of  

E-Print Network [OSTI]

A s daylight begins to illuminate the countryside, a cold wind rustles through the leaves Experiment Station, while the bulk of the funding came from Federal Aid to Wildlife Restoration administered implemented by the U.S. Fish & Wildlife Service on public lands where deer were hav- ing a noticeable negative

430

Engineering AnteaterDrive  

E-Print Network [OSTI]

Rockw ell & M DEA Engineering Tower AnteaterDrive AnteaterDrive East Peltason Drive EastPeltasonDrive East Peltason Drive Anteater Parking Structure EngineeringServiceRoad Engineering Laboratory Facility Engineering Gateway Engineering Hall AIRB Calit2 Engineering Lecture Hall Campus Building Engineering Building

Mease, Kenneth D.

431

college of engineering Undergraduate  

E-Print Network [OSTI]

» Manufacturing engineering » Mechanical engineering » nuclear engineering » radiation Health Physics OSU Cascades » industrial engineering » Materials Science » Mechanical engineering » Medical Physics » nuclear engineeringcollege of engineering FACT SHEET Undergraduate » Bioengineering » chemical engineering » civil

Tullos, Desiree

432

college of engineering Undergraduate  

E-Print Network [OSTI]

» Mechanical engineering » nuclear engineering » radiation Health Physics OSU Cascades » computer Science engineering » Materials Science » Mechanical engineering » Medical Physics » nuclear engineering » radiationcollege of engineering FACT SHEET Undergraduate » Bioengineering » chemical engineering » civil

433

Recent Activities of the Physical Society of Japan for the Promotion of Gender Equality (abstract)  

Science Journals Connector (OSTI)

We present activities of the Gender Equality Promotion Committee of the Physical Society of Japan (JPS) untaken after the Second IUPAP Women in Physics Conference Rio de Janiero 2005. These include: (1) summer and spring classes for high school girls (2) symposia on the promotion of gender equality at annual JPS meetings (3) continuous cooperation with the Japan Inter?Society Liaison Association Committee for Promoting Equal Participation of Men and Women in Science and Engineering (EPMEWSE) (4) consultation for JPS members on the Restart Postdoctoral Fellowship (RPD) program conducted by the Japan Society for the Promotion of Science (JSPS) (5) publication of a series of articles in the JPS membership journal and (6) presentation at international meetings such as the Asia Pacific Physics Conference 10 (APPC10). We report that these activities were successful.

Atsutaka Maeda; Ichiro Yonenaga; Setsuko Tajima; Emiko Hiyama; Eiko Torikai

2009-01-01T23:59:59.000Z

434

Dorothean Chair in Engineering School of Engineering  

E-Print Network [OSTI]

and service, and will have an earned doctorate in engineering or a closely related field. The new faculty of the academic community through their research, teaching, and service. The School of Engineering valuesDorothean Chair in Engineering School of Engineering College of Engineering & Mathematical Sciences

Hayden, Nancy J.

435

College of Engineering College of Engineering  

E-Print Network [OSTI]

of Engineering is to provide high quality teaching, advising, research, outreach, and service in a land grantCollege of Engineering _______________ 2.8 Page 1 College of Engineering Office in Engineering Professor Thomas Siller, Associate Dean UNDERGRADUATE MAJORS Biomedical Engineering Chemical and Biological

Stephens, Graeme L.

436

Industrial & Systems Engineering Areas of Engineering Interests  

E-Print Network [OSTI]

Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

Berdichevsky, Victor

437

Dept. of Mechanical Engineering 1500 Engineering Dr.  

E-Print Network [OSTI]

Dept. of Mechanical Engineering 1500 Engineering Dr. University of Wisconsin ­ Madison Madison, WI. of Mechanical Engineering 2008 ­ Present Director of Engine Research Center 2003 ­ 2007 Associate Professor Company, Kent, WA. 1982 ­ 1984 EDUCATION Ph.D. Mechanical Engineering Stanford University, Stanford, CA

Sheridan, Jennifer

438

Electrical and Computer Engineering Electrical Engineering  

E-Print Network [OSTI]

Electrical and Computer Engineering Electrical Engineering Department Website: www.iit.edu/engineering/ece Electrical engineering is concerned with the generation, transmission, and utilization of electrical energy and with the transmitting and processing of information. Electrical engineers are involved in the analysis, design, and pro

Heller, Barbara

439

Overcoming Degradation in Organic Photovoltaics: Illuminating the Role of Fullerene Functionalization: Preprint  

SciTech Connect (OSTI)

Photobleaching rates are investigated for thin films of poly(3-hexylthiophene) (P3HT) blends employing either an indene-C60 bisadduct (ICBA) or [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as the electron acceptor. Relative to the bisindene, PCBM significantly enhances resistance to photobleaching of the P3HT donor polymer. We tentatively attribute a decrease in the charge transfer rate as the mechanism responsible for the more rapid photobleaching in the sample containing the bisindene adduct. In order to elucidate the influence of the photobleaching rate on the initial performance of unencapsulated devices, we also monitored the time-dependent behavior for P3HT:fullerene inverted devices. Under conditions of constant illumination, we observe essentially identical behavior in device performance parameters regardless of the energy levels of the electron acceptor. We conclude that over the time frame measured for these devices, the primary degradation mechanism of the active layer is independent of the electron acceptor, despite the enhanced tolerance to photobleaching it may impart to the donor material.

Lloyd, M. T.; Garcia, A.; Berry, J. J.; Reese, M. O.; Ginley, D. S.; Olson, D. C.

2011-07-01T23:59:59.000Z

440

The effects of LED illumination spectra and intensity on carotenoid content in Brassicaceae microgreens  

Science Journals Connector (OSTI)

Abstract The objective of this study was to evaluate the effects of irradiance levels and spectra produced by solid-state light-emitting diodes (LEDs) on carotenoid content and composition changes in Brassicaceae microgreens. A system of five high-power, solid-state lighting modules with standard 447-, 638-, 665-, and 731-nm \\{LEDs\\} was used in the experiments. Two experiments were performed: (1) evaluation of LED irradiance levels of 545, 440, 330, 220, and 110?molm?2s?1 photosynthetically active flux density (PPFD) and (2) evaluation of the effects of 520-, 595-, and 622-nm \\{LEDs\\} supplemental to the standard set of LEDs. Concentrations of various carotenoids in red pak choi and tatsoi were higher under illumination of 330440?molm?2s?1 and at 110220?molm?2s?1 in mustard. All supplemental wavelengths increased total carotenoid content in mustard but decreased it in red pak choi. Carotenoid content increased in tatsoi under supplemental yellow light.

Aura Brazaityt?; Sandra Sakalauskien?; Giedr? Samuolien?; Jul? Jankauskien?; Akvil? Viril?; Algirdas Novi?kovas; Ram?nas Sirtautas; Jurga Miliauskien?; Viktorija Vatakait?; Laurynas Dabainskas; Pavelas Duchovskis

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Energy in Today's Global Society  

K-12 Energy Lesson Plans and Activities Web site (EERE)

Energy is an abstract concept that is very familiar to students from personal experiences with household appliances, transportation, and their own bodies. However, the nature of energy, energy transformations, and energy conservation are poorly understood, even by most adults. The geopolitical and environmental issues associated with energy and its consumption in todays global society are important for every citizen to appreciate in order to make informed decisions about the future. Without a deep understanding that energy is finite and that energy transformations are what give modern society its high standard of living, students today will not be prepared to make the tough personal and political decisions that await us as fossil fuel resources dwindle.

442

NITINOL ENGINE DEVELOPMENT  

E-Print Network [OSTI]

20, 1976 LBL-5293 NITINOL ENGINE DEVELOPMENT Ridgway Banksof California. NITINOL ENGINE DEVELOPMENT Ridgway Banks andof practical heat engines based on this phenomenon is

Banks, Ridgway

2013-01-01T23:59:59.000Z

443

The ESnet Engineering Team  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Publications and Presentations Galleries ESnet Awards and Honors ESnet Live Blog Home Engineering Services The ESnet Engineering Team Engineering Services The Network OSCARS...

444

Advanced Reciprocating Engine Systems  

Broader source: Energy.gov [DOE]

The Advanced Reciprocating Engine Systems (ARES) program is designed to promote separate but parallel engine development between the major stationary, gaseous fueled engine manufacturers in the...

445

Wood and Fiber Science, 37(2), 2005, pp. 207212 2005 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 37(2), 2005, pp. 207­212 © 2005 by the Society of Wood Science. Leichti Associate Professor and Barbara L. Gartner Professor Department of Wood Science and Engineering purposes that characterize smaller sections of wood. Moreover, theASTM standards spec- ify loading

Lachenbruch, Barbara

446

Wood and Fiber Science, 37(2), 2005, pp. 304313 2005 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 37(2), 2005, pp. 304­313 © 2005 by the Society of Wood Science and Technology EFFECTS OF PRUNING ON WOOD DENSITY AND TRACHEID LENGTH IN YOUNG DOUGLAS-FIR Barbara L. Gartner Professor Dept. of Wood Science and Engineering Oregon State University Corvallis, OR 97331 James M. Robbins

Lachenbruch, Barbara

447

Transactions of the Korean Nuclear Society Autumn Meeting PyeongChang, Korea, October 25-26, 2007  

E-Print Network [OSTI]

Transactions of the Korean Nuclear Society Autumn Meeting PyeongChang, Korea, October 25-26, 2007 " MCR " . Guideline of Cyber Security Policy for Digital I&C Systems in Nuclear Power Plant Zeen and Control Dept., Korea Institute of Nuclear Safety, {k407kyd,dikim}@kins.re.kr *** Reactor Engineering

Kim, Kwangjo

448

SIAM J. COMPUT. c 2010 Society for Industrial and Applied Mathematics Vol. 39, No. 6, pp. 25132530  

E-Print Network [OSTI]

grant DAAD 19-03-1-0082. Department of Computer Science and Engineering, The Chinese University of HongSIAM J. COMPUT. c 2010 Society for Industrial and Applied Mathematics Vol. 39, No. 6, pp. 2513­2530 ANY AND-OR FORMULA OF SIZE N CAN BE EVALUATED IN TIME N1/2+o(1) ON A QUANTUM COMPUTER A. AMBAINIS, A

Zhang, Shengyu

449

Industrial Engineering-BS ,PhD option in Engineering  

E-Print Network [OSTI]

I Industrial Engineering- BS ,PhD option in Engineering Industrial & Management Engineering - BS MS Engineering, Civil Engineering, Electrical 8c Computer Engineering, Environmental Engineering, Industrial Industrial Technoloity - BS option in Technology Education Interdisciplinary Studies - BA; BS J. Japan

Dyer, Bill

450

Social Engineering  

Science Journals Connector (OSTI)

......personal social media accounts are involved. There may be some merit in advising staff about social engineers, and perhaps to separate...and how it can be fooled without us knowing. Rogue Trader - Nick Leeson; Warner Books. How damning evidence can be covered......

Michael Pike

2011-03-01T23:59:59.000Z

451

ENGINEERING INTERNATIONAL  

E-Print Network [OSTI]

Sydney is Australia's largest city and its centre of finance and commerce. The Harbour Bridge, Opera House and Sydney Tower are internationally recognised icons, which represent both Sydney and its rich developed close links with many international institutions, particularly in Asia. ENGINEERING IN SYDNEY

University of Technology, Sydney

452

Harmonic engine  

DOE Patents [OSTI]

An engine based on a reciprocating piston engine that extracts work from pressurized working fluid. The engine includes a harmonic oscillator inlet valve capable of oscillating at a resonant frequency for controlling the flow of working fluid into of the engine. In particular, the inlet valve includes an inlet valve head and a spring arranged together as a harmonic oscillator so that the inlet valve head is moveable from an unbiased equilibrium position to a biased closed position occluding an inlet. Upon releasing the inlet valve the inlet valve head undergoes a single oscillation past the equilibrium positio to a maximum open position and returns to a biased return position close to the closed position to choke the flow and produce a pressure drop across the inlet valve causing the inlet valve to close. Protrusions carried either by the inlet valve head or piston head are used to bump open the inlet valve from the closed position and initiate the single oscillation of the inlet valve head, and protrusions carried either by the outlet valve head or piston head are used to close the outlet valve ahead of the bump opening of the inlet valve.

Bennett, Charles L.; Sewall, Noel; Boroa, Carl

2014-08-19T23:59:59.000Z

453

Value Engineering  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish Department of Energy (DOE) value engineering policy that meets the requirements of Public Law 104-106, Section 4306 as codified by 41 United States Code 432. Canceled by DOE N 251.94. Does not cancel other directives.

2004-01-07T23:59:59.000Z

454

From metallurgical coatings to surface engineering  

Science Journals Connector (OSTI)

The history of the Vacuum Metallurgy Division (VMD) which is now the Advanced Surface Engineering Division (ASED) of the American Vacuum Society is reviewed briefly. The focus of the VMD moved from vacuum melting of materials to metallurgical coatings. The division sponsored two conferences the Conference on Vacuum Metallurgy and the International Conference on Metallurgical Coatings. As the interest in vacuum metallurgy eventually subsided interest grew in the deposition of metallurgical coatings. However the emphasis at the Metallurgical Coatings conference has changed from just depositingcoatings to surface engineering of a component. Today the challenge is to use the tools of surface engineering with advances in deposition technology such as high-power pulsed sputtering. To align itself with the changing interests of the majority of its members the VMD changed its name to the ASED.

William D. Sproul

2003-01-01T23:59:59.000Z

455

Chemical and Petroleum Engineering Petroleum Engineering Minor  

E-Print Network [OSTI]

Chemical and Petroleum Engineering Petroleum Engineering Minor Students their skills by taking a minor in petroleum engineering. Energy is the largest global industry at $3 trillion annually, and petroleum supplies 60 percent

Calgary, University of

456

College of Engineering EE Electrical Engineering  

E-Print Network [OSTI]

College of Engineering EE Electrical Engineering KEY: # = new course * = course changed = course dropped University of Kentucky 2013-2014 Undergraduate Bulletin 1 EE 101 CREATIVITY AND DESIGN IN ELECTRICAL AND COMPUTER ENGINEERING. (3

MacAdam, Keith

457

Preparing for Transfer Biological Engineering  

E-Print Network [OSTI]

Environmental Engineering Game Design Industrial Systems & Information Technology Information Science MaterialsPreparing for Transfer Majors: Biological Engineering Chemical Engineering Civil Engineering Computer Science Electrical & Computer Engineering Engineering Physics Environmental Engineering

Walter, M.Todd

458

The Breadth of Mechanical Engineering  

E-Print Network [OSTI]

, Couplings Bearings Seals Fasteners #12;Power Generation Fossil Fuel, Nuclear, Solar, Wind Boilers, Turbines Design / Architecture HVAC / Refrigeration Illumination Sound, Noise and Acoustics #12;Machine Shop

Fabrikant, Sara Irina

459

The engineers responsibility for quality  

Science Journals Connector (OSTI)

This paper offers a definition of quality for products, explains why engineers are morally responsible for quality, and outlines how engineers can fulfill this responsibility.

Michael C. Loui

1998-01-01T23:59:59.000Z

460

Science Mathematics Engineering  

E-Print Network [OSTI]

Science Mathematics Engineering . ­ p.1 #12;Science Mathematics Engineering Science, Computer `Science', . ­ p.1 #12;Science Mathematics Engineering Science, Computer `Science', Mathematics, . ­ p.1 #12;Science Mathematics Engineering Science, Computer `Science', Mathematics, and Software Development

Hamlet, Richard

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

DEPARTMENTS Architecture & Civil Engineering  

E-Print Network [OSTI]

Communications Services Faculty of Science Faculty of Engineering & Design Faculty of Humanities & SocialDEPARTMENTS Architecture & Civil Engineering Biology & Biochemistry Chemical Engineering Chemistry Computer Science Economics Education Electronic & Electrical Engineering European Studies & Modern

Burton, Geoffrey R.

462

Mechanical Engineering Graduate Student  

E-Print Network [OSTI]

......................................................................................9 Engineering Career Services ................................................................9 McMechanical Engineering Graduate Student Handbook January 2014 Department of Mechanical Engineering University of Wisconsin-Madison #12;Mechanical Engineering Web Page: http://www.engr.wisc.edu/me Graduate

Wisconsin at Madison, University of

463

Future Climate Engineering Solutions  

E-Print Network [OSTI]

Engineering Associations from around the world are part of the project `Future Climate - Engineering Solu- tions'. Within the project the participating associations have been developing national climate plansFuture Climate Engineering Solutions Joint report 13 engineering participating engeneering

464

MECHANICAL ENGINEERING UNDERGRADUATE MAJOR  

E-Print Network [OSTI]

HANDBOOK FOR MECHANICAL ENGINEERING UNDERGRADUATE MAJOR Old Dominion University Department of Mechanical Engineering Batten College of Engineering and Technology Norfolk, Virginia 23529-0247 #12;TABLE OF CONTENTS MECHANICAL ENGINEERING HANDBOOK

465

Department of Biomedical Engineering  

E-Print Network [OSTI]

Department of Biomedical Engineering Undergraduate Studies Manual 2010­2011 #12;Biomedical Engineering Undergraduate Advising Manual 2010 | 1 Introduction 2 Biomedical Engineering at Washington University 4 Career Opportunities 6 Department Mission & Objective 7 Department of Biomedical Engineering 8

Stormo, Gary

466

Meetings of Affiliated Scientific Societies in America  

Science Journals Connector (OSTI)

... AN important series of scientific meetings was held at Philadelphia, December 2628, under the leadership of the American Society of Naturalists, and including six other ...

1896-01-30T23:59:59.000Z

467

in Civil Engineering Megastructure Engineering  

E-Print Network [OSTI]

, energy consumption, environmental health and use of resources; · Optimise the design by a sustainable use of the growing shortness of construction materials and energy resources. It is this focus on both themes, megastructures and sustainability, which sets us apart from other masters of civil engineering. This Master

van der Torre, Leon

468

The effect of oxygen concentration on the development of photosynthetic capacity by etiolated bean seedlings upon illumination  

Science Journals Connector (OSTI)

Summary The effects of oxygen concentration on 14CO2 uptake, the time required to compensation of respiration by photosynthesis and the greening of etiolated seedlings of bean upon illumination were investigated. It has been found that this factor had a large inhibitory action on the processes examined. In atmospheres of 1 and 21 % O2 the fixation of 14CO2 was observed after 3 hours of illumination, while in 100% O2 after 8 hours. The time required for compensation of respiration by photosynthesis was in order of 8 hours in 1% O2, 10 hours in 21 % O2 and 20 hours in 100 % O2 respectively. The chlorophyll a + b biosynthesis followed the similar pattern of inhibition by O2 as photosynthesis. The lag phase for the appearance of chlorophyll biosynthesis in 1 and 21 % O2 was 3 hours while in 100%O2 6 hours.

J. Poskuta; M. Mikulska; M. Faltynowicz; B. Bielak; B. Wrblewska

1974-01-01T23:59:59.000Z

469

Liquid Piston Stirling Engines  

Science Journals Connector (OSTI)

The Fluidyne liquid piston engine is a simple free-piston Stirling engine that can be made from nothing more...

Graham Walker Ph. D.; J. R. Senft Ph.D.

1985-01-01T23:59:59.000Z

470

An Energy-Stabilized Varied-Line-Space-Monochromator UndulatorBeam Line for PEEM Illumination and Magnetic Circular Dichroism  

SciTech Connect (OSTI)

A new undulator beam line has been built and commissioned at the Advanced Light Source for illumination of the PEEM3 microscope. The beam line delivers high flux beams over an energy range from C1s through the transition metals to include the M edges of the magnetic rare earth elements. We present details of the optical design, and data on the performance of the zero-order tracking of the photon energy.

Warwick, Tony; McKinney, Wayne; Domning, Ed; Doran, Andrew; Padmore, Howard

2006-06-01T23:59:59.000Z

471

Engineers Constructors  

Office of Legacy Management (LM)

Engineers Engineers - Constructors ~ /:~ ( ' r,.... I!~\ l.,_",z;(J;' Bechtel National, Inc. Oak Ridge Office Jackson Plaza Tower 800 Oak Ridge Turnpike Oak Ridge. Tennessee Mail Address: P. O. B01l 350. Oak Ridge. TN 37830 bce-. R. Barber C. t1iller E. Wal ker C. Knoke G. Phillips G. Scott L. Blevins K. Harer DOE File No. 030-04G Professional Land Surveying 1404 Second Street Santa Fe, New Mexico 87501 Attn: Mr. Robert Benavides Reference: Purchase Contract l4501-01j04-PC-19 Bayo Canyon Survey Dear Mr. Benavides: The following are clarifications to the referenced contract specification. The need for clarification to the specification arises from the fact that the Bayo Canyon site is transected by a corporate boundary, the Los Alamos County-Santa Fe County line. This condition affects three items in the specification Scope Of Work: Item 1.2.5, the as-built site plan of the Bayo

472

INDUSTRIAL ENGINEERING GRADUATE PROGRAMS  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor of Philosophy in Systems and Engineering Management programs prepare competent industrial engineers

Gelfond, Michael

473

112 COLLEGE OF ENGINEERING AND ENGINEERING TECHNOLOGY College of Engineering and Engineering  

E-Print Network [OSTI]

in mainline engineering and technology fields applicable to the region's current and potential industrial mix programs of study. The undergraduate programs in electrical engineering, industrial engineering of Industrial Engineering B.S. in industrial engineering Department of Mechanical Engineering B.S. in mechanical

Kostic, Milivoje M.

474

MSc Programme Engineering  

E-Print Network [OSTI]

· Diesel Engines · Control Engineering Control Engineering is about the analysis and design of reliableMSc Programme Mechanical Engineering At TU Delft, the goal of the MSc Programme in Mechanical Engineering is to give students a broad and an in-depth understanding of all mechanical engineering

Langendoen, Koen

475

ENGINEERING MANAGEMENT AND LEADERSHIP  

E-Print Network [OSTI]

Architecture 1910 Aeronautical Engineering 1958 Nuclear Engineering 1974 Materials Engineering #12;HistoryENGINEERING MANAGEMENT AND LEADERSHIP Where did we come from? Where are we going? How do we get · If it works but no one knows why, it's ENGINEERING #12;The scientist explains that which exists; The engineer

Eagar, Thomas W.

476

Department of Biomedical Engineering  

E-Print Network [OSTI]

Department of Biomedical Engineering Graduate Studies Manual 2011­2012 #12;Biomedical Engineering Graduate Advising Manual 2011 | 1 Welcome 2 Biomedical Engineering 4 About Washington University 6 Research in Biomedical Engineering 30 Biomaterials and Tissue Engineering 30 Cardiovascular Engineering 32 Imaging 34

Stormo, Gary

477

154th National American Chemical Society Meeting Chicago, III. Sept. 10 to 15, 1967  

Science Journals Connector (OSTI)

154th National American Chemical Society Meeting Chicago, III. ... Copyright 1967 American Chemical Society ...

1967-08-01T23:59:59.000Z

478

Patents: Nuclear Engineering Division (Argonne)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About the Division > Patents About the Division > Patents Director's Welcome Organization Achievements Awards Patents Professional Societies Highlights Fact Sheets, Brochures & Other Documents Multimedia Library About Nuclear Energy Nuclear Reactors Designed by Argonne Argonne's Nuclear Science and Technology Legacy Opportunities within NE Division Visit Argonne Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Celebrating the 70th Anniversary of Chicago Pile 1 (CP-1) Argonne OutLoud on Nuclear Energy Argonne Energy Showcase 2012 Patents Bookmark and Share Printable Patents List ( PDF PDF file, 225 KB) Over 50 patents have been issued to Nuclear Engineering Division staff members by the US Patent Office from 2000 to present. The table below features a complete list of patents (2000-present) issued

479

Engine ground demonstration test approach  

SciTech Connect (OSTI)

The hardware portion of the current phase of the Integrated Solar Upper Stage (ISUS) program culminates in a system ground demonstration test. The potential application of ISUS technology to a wide array of future missions complicates the process of selecting from among demonstration system design options and test approaches. The approach to this system demonstration has been to maximize system technology readiness level for the entire array of potential missions within the constraints of the program. To this end, system design and test operations planning has been carried out with a premium on demonstrating those elements of the system common to all missions. In addition, test planning has been managed to allow margin for testing those portions of the system envelope needed to confirm acceptable operation for scenarios within the mission set that are specific to a given mission or mission type. Examples drawn from the specific Engine Ground Demonstration (EGD) design selections are used to illuminate this approach, with the result that the EGD system design is not only described, but the reasons for its particular characteristics are made evident.

Kudija, C.T. [Rockwell Aerospace, Canoga Park, CA (United States). Rocketdyne Div.

1996-12-31T23:59:59.000Z

480

Test results of applicative 100 W Stirling engine  

SciTech Connect (OSTI)

A small 100 W displacer-type Stirling engine, Ecoboy-SCM81, has been developed by a committee of the Japan Society of Mechanical Engineers (JSME). The engine contains unique features, including an expansion cylinder which is heated by either combustion gas or direct solar energy. Also, a simple cooling system rejects heat from the working fluid. A displacer piston has both heating and cooling inner tubes for the working fluid which flows to and from outer tubes. The outer tubes for heating were located at the top of the expansion cylinder and the outer tubes for cooling were located in the middle of the cylinder. A regenerator is located in the displacer piston. The components of the engine adopted some new technologies. For instance, a porous type matrix consisting of pressed zigzag stainless steel wires were adopted for the regenerator. The matrix is practical for Stirling engines because it can be made at low cost and the assembling process is simplified.

Hirata, Koichi [Saitama Univ., Urawa, Saitama (Japan). Dept. of Mechanical Engineering; Kagawa, Noboru [National Defense Academy, Yokosuka, Kanagawa (Japan). Dept. of Applied Physics; Takeuchi, Makoto [Suction Gas Engine Manufacturing Co., Ltd., Tokyo (Japan); Yamashita, Iwao [Tokyo Denki Univ., Tokyo (Japan). Dept. of Mechanical Engineering; Isshiki, Naotsugu [Nihon Univ., Tokyo (Japan); Hamaguchi, Kazuhiro [Hokkaido Polytechnic Coll., Otaru, Hokkaido (Japan)

1996-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "illuminating engineering society" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Engines - Spark Ignition Engines - Direct Injection - Omnivorous Engine  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Direct Injection, Spark-Ignited Engines Direct Injection, Spark-Ignited Engines Omnivorous Engine Omnivorous Engine Setup Omnivorous Engine Setup New engine technology has made possible engines that will operate on a wide variety of fuel inputs, from gasoline to naptha to ethanol to methanol, without driver intervention. Although flexible fuel vehicles have been produced in the millions, their engines have always been optimized for gasoline operation while accepting significant performance and efficiency degradations when using the alternative fuel. This project seeks to combine in-cylinder measurement technology, and advanced controls to optimize spark timing, the quantity and timing of injected fuel, to produce an "omnivorous engine"--one that will be able to run on any liquid spark ignition fuel with optimal efficiency and low

482

The Institute of Physics and the Physical Society  

Science Journals Connector (OSTI)

... transfer of the assets of the Society to the newly amalgamated body, the Institute of Physics and the Physical Society, were unanimously carried.

1960-11-05T23:59:59.000Z

483

MASTER OF ENGINEERING Biological and Environmental Engineering  

E-Print Network [OSTI]

Marchewka, Student Services Coordinator Department of Biological and Environmental Engineering 207 RileyMASTER OF ENGINEERING Biological and Environmental Engineering Program Requirements Fall 2014 The Master of Engineering (MEng) is a professional degree program intended for those who have a Bachelors

Walter, M.Todd

484

ENGINEERING COMPUTER SERVICES COLLEGE O F ENGINEERING  

E-Print Network [OSTI]

ENGINEERING COMPUTER SERVICES COLLEGE O F ENGINEERING Student Application for ECS Computer Account: ( ) ENGIN ( ) CEE ( ) CHE ( ) ECE ( ) MIE ( ) Other: Advisor: Choose I or I1 below: I. ( ) Unfunded Account - Choose A or B ( ) A. Complete if Engineering Student: Authorized signature required. Authorized persons

Mountziaris, T. J.

485

Distinguished Engineering Graduate Outstanding Young Engineering Graduate  

E-Print Network [OSTI]

, or service delivery through the application of engineering principles; or · Contributed truly exceptional2013 Distinguished Engineering Graduate and Outstanding Young Engineering Graduate Award Nomination Form Print Form #12;The highest honor the Cockrell School of Engineering can bestow on one of its own

Lightsey, Glenn

486

MASTER OF ENGINEERING Biological and Environmental Engineering  

E-Print Network [OSTI]

Marchewka, Student Services Coordinator Department of Biological and Environmental Engineering 207 RileyMASTER OF ENGINEERING Biological and Environmental Engineering Program Requirements Fall 2013 The Master of Engineering (MEng) is a professional degree program intended for those who have a Bachelors

Walter, M.Todd

487

INDUSTRIAL ENGINEERING Industrial engineering is concerned  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

488

INDUSTRIAL ENGINEERING Industrial engineering is concerned  

E-Print Network [OSTI]

INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

489

spring 2010 Columbia EnginEEring  

E-Print Network [OSTI]

spring 2010 Columbia EnginEEring Michael MassiMino, Bs '84, nasa astronaut--page 15 ursula Burns an impaCt leaders making an impact flight #12;coluMBia engineering | spring 2010 | 1 contentsSpring 2010 West 120th street, Mc 4714 new York, nY 10027 #12;2 | engineering neWs | spring 2010 colu

Hone, James

490

http://hfs.sagepub.com/ Ergonomics Society  

E-Print Network [OSTI]

http://hfs.sagepub.com/ Ergonomics Society of the Human Factors and Human Factors: The Journal http online 2 July 2012 2013 55: 157 originallyHuman Factors: The Journal of the Human Factors and Ergonomics Published by: http://www.sagepublications.com On behalf of: Human Factors and Ergonomics Society can

491

Introduction Maps in Science and Society  

E-Print Network [OSTI]

Introduction Maps in Science and Society Professor Keith C. Clarke TA Haiyun Ye Winter 2014 #12;Maps in Science and Society · This class is designed to show how technical and scientific development in cartography produced a series of instruments, practitioners, and ultimately maps that illustrate the strive

Clarke, Keith

492

Zoological Society of London : Annual Awards  

Science Journals Connector (OSTI)

... THE Zoological Society of London will, from 1962 onwards, make the following annual awards for contributions to zoology. These will be in addition to the Society's Gold, ... years of age, for distinguished work in zoology. The Prince Philip Prize will be awarded to a pupil of zoology, on the basis of an account of some practical ...

1961-08-12T23:59:59.000Z

493

Undergraduate Alumni LEHIGH UNIVERSITY 1 Society Associate  

E-Print Network [OSTI]

++ Donors James A. Branegan, Jr. ++ Malcolm S. Muir Earl C. Olofson Charles J. Rife 1936 University Richard W. Rusk James A. Weidenhammer ++ Society Associates Walter C. Allen, Jr. ++ John H. Barry. Snyder Nathan Spilberg R. Donald Walp ++ Philip J. Welch, Sr. ++ 1939 Society Associates Robert B. Evans

Gilchrist, James F.

494

The Gulf Coast Energy Conservation Society  

E-Print Network [OSTI]

to a formalized society of 29 industrial plants from Galveston, Brazoria, and Harris counties in Texas. The society meets six times per year to exchange ideas and learn about new equipment or technologies that will help them do a better job of saving...

Faulkner, C. R.

1979-01-01T23:59:59.000Z

495

The following courses will fulfill Biomedical Engineering technical electives for students in Biomedical Engineering and Chemical & Biomedical Engineering (3 credits required), Biomedical Engineering and Electrical Engineering (9 credits  

E-Print Network [OSTI]

The following courses will fulfill Biomedical Engineering technical electives for students in Biomedical Engineering and Chemical & Biomedical Engineering (3 credits required), Biomedical Engineering and Electrical Engineering (9 credits required), Biomedical Engineering and Electrical Engineering with Lasers

Stephens, Graeme L.

496

Engineering at a Glance Faculty  

E-Print Network [OSTI]

Program # of Students Aerospace Engineering: Biomedical Engineering: Computer Engineering: Electrical submitting the TOEFL exam. #12;Engineering MS/PhD Students Aerospace Engineering: Biomedical#12;Engineering at a Glance · Faculty ­105 Tenured/tenure track ­10 Non

Guenther, Frank

497

ENGINEERING DEPARTMENTS, DEGREES AND CONCENTRATIONS  

E-Print Network [OSTI]

ENGINEERING, CHEMISTRY AND SCIENCE (TECS) Biological Engineering (BE) Biomedical Engineering (BME) ChemicalENGINEERING DEPARTMENTS, DEGREES AND CONCENTRATIONS DEPARTMENT DEGREE CONCENTRATION (optional) BIOLOGICAL AND AGRICULTURAL ENGINEERING (BAE) BIOMEDICAL ENGINEERING (BME) CHEMICAL AND BIOMOLECULAR

498

NREL: Systems Engineering - 2015 Wind Energy Systems Engineering...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Systems Engineering Wind Research Systems Engineering Printable Version 2015 Wind Energy Systems Engineering Workshop The third NREL Wind Energy Systems Engineering Workshop will...

499

The Complexification of Engineering  

E-Print Network [OSTI]

This paper deals with the arrow of complexification of engineering. We claim that the complexification of engineering consists in (a) that shift throughout which engineering becomes a science; thus it ceases to be a (mere) praxis or profession; (b) becoming a science, engineering can be considered as one of the sciences of complexity. In reality, the complexification of engineering is the process by which engineering can be studied, achieved and understood in terms of knowledge, and not of goods and services any longer. Complex engineered systems and bio-inspired engineering are so far the two expressions of a complex engineering.

Maldonado, Carlos Eduardo

2011-01-01T23:59:59.000Z

500

Diesel engine reference book  

SciTech Connect (OSTI)

This book is a reference on the design, operation, and maintenance of all types of diesel engines, ranging from the smallest automotive and ancillary engines to the largest marine diesels. Nearly 900 line drawings, graphs and photos illustrate the book. Major Sections: Theory; Engine Design Practice; Lubrication; Environmental Pollution; Crankcase Explosions; Engine Types; Engine Testing; Maintenance; Index.

Lilly, I.R.C.

1984-01-01T23:59:59.000Z