National Library of Energy BETA

Sample records for iii solar coordinates

  1. Panel Session III: Innovation and Coordination

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lessons Learned for Hydrogen Panel Session III: Innovation Panel Session III: Innovation and Coordination and Coordination ______________________________ Stefan Unnasch Life Cycle Associates 3 April 2008 2 Hydrogen Vision Life Cycle Associates 3 Hydrogen Infrastructure Today Life Cycle Associates Source: Weinert, J. X., et al.. (2005). CA Hydrogen Highway Network Blueprint Plan, Economics Report 4 Innovation and Coordination Life Cycle Associates Innovation Coordination ☯ Slow Fast Cars Codes

  2. Solar type III radio bursts modulated by homochromous Alfvn waves

    SciTech Connect (OSTI)

    Zhao, G. Q.; Chen, L.; Wu, D. J.

    2013-12-10

    Solar type III radio bursts and their production mechanisms have been intensively studied in both theory and observation and are believed to be the most important signatures of electron acceleration in active regions. Recently, Wu et al. proposed that the electron-cyclotron maser emission (ECME) driven by an energetic electron beam could be responsible for producing type III bursts and pointed out that turbulent Alfvn waves can greatly influence the basic process of ECME via the oscillation of these electrons in the wave fields. This paper investigates effects of homochromous Alfvn waves (HAWs) on ECME driven by electron beams. Our results show that the growth rate of the O-mode wave will be significantly modulated by HAWs. We also discuss possible application to the formation of fine structures in type III bursts, such as so-called solar type IIIb radio bursts.

  3. Passive solar design handbook. Volume III. Passive solar design analysis

    SciTech Connect (OSTI)

    Jones, R.W.; Balcomb, J.D.; Kosiewicz, C.E.; Lazarus, G.S.; McFarland, R.D.; Wray, W.O.

    1982-07-01

    Simple analytical methods concerning the design of passive solar heating systems are presented with an emphasis on the average annual heating energy consumption. Key terminology and methods are reviewed. The solar load ratio (SLR) is defined, and its relationship to analysis methods is reviewed. The annual calculation, or Load Collector Ratio (LCR) method, is outlined. Sensitivity data are discussed. Information is presented on balancing conservation and passive solar strategies in building design. Detailed analysis data are presented for direct gain and sunspace systems, and details of the systems are described. Key design parameters are discussed in terms of their impact on annual heating performance of the building. These are the sensitivity data. The SLR correlations for the respective system types are described. The monthly calculation, or SLR method, based on the SLR correlations, is reviewed. Performance data are given for 9 direct gain systems and 15 water wall and 42 Trombe wall systems. (LEW)

  4. Application of the BISON Fuel Performance Code to the FUMEX-III Coordinated Research Project

    SciTech Connect (OSTI)

    R. L. Williamson; S. R. Novascone

    2012-04-01

    INL recently participated in FUMEX-III, an International Atomic Energy Agency sponsored fuel modeling Coordinated Research Project. A main purpose of FUMEX-III is to compare code predictions to reliable experimental data. During the same time period, the INL initiated development of a new multidimensional (2D and 3D) multiphysics nuclear fuel performance code called BISON. Interactions with international fuel modeling researchers via FUMEX-III played a significant and important role in the BISON evolution, particularly influencing the selection of material and behavioral models which are now included in the code. BISON's ability to model integral fuel rod behavior did not mature until 2011, thus the only FUMEX-III case considered was the Riso3-GE7 experiment, which includes measurements of rod outer diameter following pellet clad mechanical interaction (PCMI) resulting from a power ramp late in fuel life. BISON comparisons to the Riso3-GE7 final rod diameter measurements are quite reasonable. The INL is very interested in participation in the next Fuel Modeling Coordinated Research Project and would like to see the project initiated as soon as possible.

  5. Methods for fabricating thin film III-V compound solar cell

    DOE Patents [OSTI]

    Pan, Noren; Hillier, Glen; Vu, Duy Phach; Tatavarti, Rao; Youtsey, Christopher; McCallum, David; Martin, Genevieve

    2011-08-09

    The present invention utilizes epitaxial lift-off in which a sacrificial layer is included in the epitaxial growth between the substrate and a thin film III-V compound solar cell. To provide support for the thin film III-V compound solar cell in absence of the substrate, a backing layer is applied to a surface of the thin film III-V compound solar cell before it is separated from the substrate. To separate the thin film III-V compound solar cell from the substrate, the sacrificial layer is removed as part of the epitaxial lift-off. Once the substrate is separated from the thin film III-V compound solar cell, the substrate may then be reused in the formation of another thin film III-V compound solar cell.

  6. Complexation of Curium(III) with DTPA at 10–70 °C: Comparison with Eu(III)–DTPA in Thermodynamics, Luminescence, and Coordination Modes

    SciTech Connect (OSTI)

    Tian, Guoxin; Zhang, Zhiyong; Martin, Leigh R.; Rao, Linfeng

    2015-02-16

    Separation of trivalent actinides (An(III)) from trivalent lanthanides (Ln(III)) is a challenging task because of their nearly identical chemical properties. Diethylenetriaminepentaacetate (DTPA), a key reagent used in the TALSPEAK process that effectively separates An(III) from Ln(III), is believed to play a critical role in the An(III)/Ln(III) separation. However, the underlying principles for the separation based on the difference in the complexation of DTPA with An(III) and Ln(III) remain unclear. In this work, the complexation of DTPA with Cm(III) at 10-70 ºC was investigated by spectrophotometry, luminescence spectroscopy, and microcalorimetry, in conjunction with computational methods. The binding strength, the enthalpy of complexation, the coordination modes, and the luminescence properties are compared between the Cm(III)-DTPA and Eu(III)-DTPA systems. The experimental and computational data have demonstrated that the difference between Cm(III) and Eu(III) in the binding strength with DTPA can be attributed to the stronger covalence bonding between Cm(III) and the nitrogen donors of DTPA.

  7. "Coordinated Solar Energetic Events", Professor Alan M. Title...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The remote triggering makes flare prediction based upon local energy build up models less valuable, but suggests that with proper coverage prediction of solar events with potential ...

  8. Sandia Energy - III-Nitride core-shell nanowire arrayed solar...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for other III-nitride devices such as light-emitting diodes (LEDs). Abstract: A solar cell based on a hybrid nanowire-film architecture consisting of a vertically aligned...

  9. "Coordinated Solar Energetic Events", Professor Alan M. Title, Lockheed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Martin Advance Technology Center/Stanford University | Princeton Plasma Physics Lab September 19, 2012, 4:15pm Colloquia "Coordinated Solar Energetic Events", Professor Alan M. Title, Lockheed Martin Advance Technology Center/Stanford University The Atmospheric Imaging Assembly (AIA) on the Solar Dynamic Observatory with obtains full disk images that span the temperature range from 6000 to 20,000,000K with arcsecond resolution and a 12 second cadence. Because of the enhanced

  10. Group I-III-VI.sub.2 semiconductor films for solar cell application

    DOE Patents [OSTI]

    Basol, Bulent M.; Kapur, Vijay K.

    1991-01-01

    This invention relates to an improved thin film solar cell with excellent electrical and mechanical integrity. The device comprises a substrate, a Group I-III-VI.sub.2 semiconductor absorber layer and a transparent window layer. The mechanical bond between the substrate and the Group I-III-VI.sub.2 semiconductor layer is enhanced by an intermediate layer between the substrate and the Group I-III-VI.sub.2 semiconductor film being grown. The intermediate layer contains tellurium or substitutes therefor, such as Se, Sn, or Pb. The intermediate layer improves the morphology and electrical characteristics of the Group I-III-VI.sub.2 semiconductor layer.

  11. Wave-wave interactions in solar type III radio bursts

    SciTech Connect (OSTI)

    Thejappa, G.; MacDowall, R. J.

    2014-02-11

    The high time resolution observations from the STEREO/WAVES experiment show that in type III radio bursts, the Langmuir waves often occur as localized magnetic field aligned coherent wave packets with durations of a few ms and with peak intensities well exceeding the strong turbulence thresholds. Some of these wave packets show spectral signatures of beam-resonant Langmuir waves, down- and up-shifted sidebands, and ion sound waves, with frequencies, wave numbers, and tricoherences satisfying the resonance conditions of the oscillating two stream instability (four wave interaction). The spectra of a few of these wave packets also contain peaks at f{sub pe}, 2f{sub pe} and 3 f{sub pe} (f{sub pe} is the electron plasma frequency), with frequencies, wave numbers and bicoherences (computed using the wavelet based bispectral analysis techniques) satisfying the resonance conditions of three wave interactions: (1) excitation of second harmonic electromagnetic waves as a result of coalescence of two oppositely propagating Langmuir waves, and (2) excitation of third harmonic electromagnetic waves as a result of coalescence of Langmuir waves with second harmonic electromagnetic waves. The implication of these findings is that the strong turbulence processes play major roles in beam stabilization as well as conversion of Langmuir waves into escaping radiation in type III radio bursts.

  12. Passive solar design handbooks: Vol III: passive solar design analysis and supplement

    SciTech Connect (OSTI)

    Balcomb, J.D.; Jones, R.W.; Kosciewicz, C.E.; Lazarus, G.S.; McFarland, R.D.; Wray, W.O.

    1983-01-01

    This book applies the Los Alamos Solar Load Ratio (SLR) method to the design of passive solar heating systems, with an emphasis on the average annual heating energy consumption. Recommendations are given on minimizing heating energy consumption by appropriate choices of conservation level and solar system parameters. Analytical methods and supporting tables are presented which enable simple, fast estimates of the heating energy consumption as part of the design process. Topics considered include SLR correlations, the load collector ratio (LCR) method, sensitivity data, cooling considerations, conservation formulas, design procedure, life-cycle costs, high-mass direct gain buildings, low-mass sun-tempered buildings, sunspaces, off-reference night insulation, correlation equations, and mixed systems.

  13. High Efficiency Nanostructured III-V Photovoltaics for Solar Concentrator Application

    SciTech Connect (OSTI)

    Hubbard, Seth

    2012-09-12

    The High Efficiency Nanostructured III-V Photovoltaics for Solar Concentrators project seeks to provide new photovoltaic cells for Concentrator Photovoltaics (CPV) Systems with higher cell efficiency, more favorable temperature coefficients and less sensitivity to changes in spectral distribution. The main objective of this project is to provide high efficiency III-V solar cells that will reduce the overall cost per Watt for power generation using CPV systems.This work is focused both on a potential near term application, namely the use of indium arsenide (InAs) QDs to spectrally "tune" the middle (GaAs) cell of a SOA triple junction device to a more favorable effective bandgap, as well as the long term goal of demonstrating intermediate band solar cell effects. The QDs are confined within a high electric field i-region of a standard GaAs solar cell. The extended absorption spectrum (and thus enhanced short circuit current) of the QD solar cell results from the increase in the sub GaAs bandgap spectral response that is achievable as quantum dot layers are introduced into the i-region. We have grown InAs quantum dots by OMVPE technique and optimized the QD growth conditions. Arrays of up to 40 layers of strain balanced quantum dots have been experimentally demonstrated with good material quality, low residual stain and high PL intensity. Quantum dot enhanced solar cells were grown and tested under simulated one sun AM1.5 conditions. Concentrator solar cells have been grown and fabricated with 5-40 layers of QDs. Testing of these devices show the QD cells have improved efficiency compared to baseline devices without QDs. Device modeling and measurement of thermal properties were performed using Crosslight APSYS. Improvements in a triple junction solar cell with the insertion of QDs into the middle current limiting junction was shown to be as high as 29% under one sun illumination for a 10 layer stack QD enhanced triple junction solar cell. QD devices have strong

  14. A DECADE OF SOLAR TYPE III RADIO BURSTS OBSERVED BY THE NANCAY RADIOHELIOGRAPH 1998-2008

    SciTech Connect (OSTI)

    Saint-Hilaire, P. [Space Sciences Laboratory, University of California, Berkeley, CA 94720 (United States)] [Space Sciences Laboratory, University of California, Berkeley, CA 94720 (United States); Vilmer, N.; Kerdraon, A., E-mail: shilaire@ssl.berkeley.edu [LESIA, Observatoire de Paris, CNRS, UPMC, Universite Paris-Diderot 5 place Jules Janssen, F-92195 Meudon (France)

    2013-01-01

    We present a statistical survey of almost 10,000 radio type III bursts observed by the Nancay Radioheliograph from 1998 to 2008, covering nearly a full solar cycle. In particular, sources sizes, positions, and fluxes were examined. We find an east-west asymmetry in source positions that could be attributed to a 6 Degree-Sign {+-} 1 Degree-Sign eastward tilt of the magnetic field, that source FWHM sizes s roughly follow a solar-cycle-averaged distribution (dN/ds) Almost-Equal-To 14 {nu}{sup -3.3} s {sup -4} arcmin{sup -1} day{sup -1}, and that source fluxes closely follow a solar-cycle-averaged (dN/ds {sub {nu}}) Almost-Equal-To 0.34 {nu}{sup -2.9} S {sup -1.7} {sub {nu}} sfu{sup -1} day{sup -1} distribution (when {nu} is in GHz, s in arcminutes, and S {sub {nu}} in sfu). Fitting a barometric density profile yields a temperature of 0.6 MK, while a solar wind-like ({proportional_to}h {sup -2}) density profile yields a density of 1.2 Multiplication-Sign 10{sup 6} cm{sup -3} at an altitude of 1 R{sub S} , assuming harmonic emission. Finally, we found that the solar-cycle-averaged radiated type III energy could be similar in magnitude to that radiated by nanoflares via non-thermal bremsstrahlung processes, and we hint at the possibility that escaping electron beams might carry as much energy away from the corona as is introduced into it by accelerated nanoflare electrons.

  15. III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    III .. III A HIGH RESOLUTION STUDY OF ISOBARIC ANAL.OGUE STATES IN 41K AND 23 Na by George A lbert Keyworth II Department of Physics Duke University A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Physics in the Graduate School of Arts and Sciences of Duke University 1968 I I I I I I I I I I I I I I I I I I I A HIGH RESOLUTION STUDY OF ISOBARIC ANALOGUE STATES IN 41 K - AND 23 Na ,. by George Albert Keyworth II

  16. Luminescent pillared Ln{sup III}Zn{sup II} heterometallic coordination frameworks with two kinds of N-heterocyclic carboxylate ligands

    SciTech Connect (OSTI)

    Liu, Sui-Jun; Jia, Ji-Min; Cui, Yu; Han, Song-De; Chang, Ze

    2014-04-01

    In our efforts toward rational design and systematic synthesis of pillar-layer structure coordination frameworks, four new Ln{sup III}Zn{sup II} heterometallic coordination polymers (CPs) based on two kinds of N-heterocyclic carboxylic ligands with formula ([LnZn(L1){sub 2}(L2)(H{sub 2}O){sub m}]nH{sub 2}O){sub ?} (Ln=La (1), Eu (2), Gd (3) and Dy (4), m=3 (for 1) and 2 (for 24), n=8 (for 1) and 7 (for 24), H{sub 2}L1=pyridine-2,3-dicarboxylate acid, HL2=isonicotinic acid), have been synthesized under hydrothermal reaction of Ln{sub 2}O{sub 3}, ZnO, H{sub 2}L1 and HL2. CP 1 has a three-dimensional (3D) structure with a (3,6)-connected sit topology network, while CPs 24 are isostructural with 3D single-node pcu alpha-Po topology network. Also, luminescent properties of these CPs have also been investigated. The emission of 1 and 3 should be attributed to the coordination-perturbed ligand-centered luminescence and the emission spectra of 2 and 4 show the characteristic bands of the corresponding Ln{sup III} ions. - Graphical abstract: Four new 3D Ln{sup III}Zn{sup II} coordination frameworks with pillar-layer sit or pcu alpha-Po topology have been successfully obtained. Moreover, the photoluminescent properties of compounds 14 have also been investigated. - Highlights: Four new Ln{sup III}Zn{sup II} heterometallic coordination frameworks with two types of topologies have been synthesized. Metal oxides and two kinds of N-heterocyclic carboxylate ligands were used for the construction of targeted coordination polymers. The luminescent properties of the coordination polymers are investigated.

  17. The effect of initial conditions on the electromagnetic radiation generation in type III solar radio bursts

    SciTech Connect (OSTI)

    Schmitz, H.; Tsiklauri, D.

    2013-06-15

    Extensive particle-in-cell simulations of fast electron beams injected in a background magnetised plasma with a decreasing density profile were carried out. These simulations were intended to further shed light on a newly proposed mechanism for the generation of electromagnetic waves in type III solar radio bursts [D. Tsiklauri, Phys. Plasmas, 18, 052903 (2011)]. The numerical simulations were carried out using different density profiles and fast electron distribution functions. It is shown that electromagnetic L and R modes are excited by the transverse current, initially imposed on the system. In the course of the simulations, no further interaction of the electron beam with the background plasma could be observed.

  18. Dilute Group III-V nitride intermediate band solar cells with contact blocking layers

    DOE Patents [OSTI]

    Walukiewicz, Wladyslaw; Yu, Kin Man

    2012-07-31

    An intermediate band solar cell (IBSC) is provided including a p-n junction based on dilute III-V nitride materials and a pair of contact blocking layers positioned on opposite surfaces of the p-n junction for electrically isolating the intermediate band of the p-n junction by blocking the charge transport in the intermediate band without affecting the electron and hole collection efficiency of the p-n junction, thereby increasing open circuit voltage (V.sub.OC) of the IBSC and increasing the photocurrent by utilizing the intermediate band to absorb photons with energy below the band gap of the absorber layers of the IBSC. Hence, the overall power conversion efficiency of a IBSC will be much higher than an conventional single junction solar cell. The p-n junction absorber layers of the IBSC may further have compositionally graded nitrogen concentrations to provide an electric field for more efficient charge collection.

  19. Dilute group III-V nitride intermediate band solar cells with contact blocking layers

    DOE Patents [OSTI]

    Walukiewicz, Wladyslaw; Yu, Kin Man

    2015-02-24

    An intermediate band solar cell (IBSC) is provided including a p-n junction based on dilute III-V nitride materials and a pair of contact blocking layers positioned on opposite surfaces of the p-n junction for electrically isolating the intermediate band of the p-n junction by blocking the charge transport in the intermediate band without affecting the electron and hole collection efficiency of the p-n junction, thereby increasing open circuit voltage (V.sub.OC) of the IBSC and increasing the photocurrent by utilizing the intermediate band to absorb photons with energy below the band gap of the absorber layers of the IBSC. Hence, the overall power conversion efficiency of a IBSC will be much higher than an conventional single junction solar cell. The p-n junction absorber layers of the IBSC may further have compositionally graded nitrogen concentrations to provide an electric field for more efficient charge collection.

  20. A NEW THREE-DIMENSIONAL SOLAR WIND MODEL IN SPHERICAL COORDINATES WITH A SIX-COMPONENT GRID

    SciTech Connect (OSTI)

    Feng, Xueshang; Zhang, Man; Zhou, Yufen

    2014-09-01

    In this paper, we introduce a new three-dimensional magnetohydrodynamics numerical model to simulate the steady state ambient solar wind from the solar surface to 215 R {sub s} or beyond, and the model adopts a splitting finite-volume scheme based on a six-component grid system in spherical coordinates. By splitting the magnetohydrodynamics equations into a fluid part and a magnetic part, a finite volume method can be used for the fluid part and a constrained-transport method able to maintain the divergence-free constraint on the magnetic field can be used for the magnetic induction part. This new second-order model in space and time is validated when modeling the large-scale structure of the solar wind. The numerical results for Carrington rotation 2064 show its ability to produce structured solar wind in agreement with observations.

  1. Methods for forming thin-film heterojunction solar cells from I-III-VI.sub. 2

    DOE Patents [OSTI]

    Mickelsen, Reid A.; Chen, Wen S.

    1985-08-13

    An improved thin-film, large area solar cell, and methods for forming the same, having a relatively high light-to-electrical energy conversion efficiency and characterized in that the cell comprises a p-n type heterojunction formed of: (i) a first semiconductor layer comprising a photovoltaic active material selected from the class of I-III-VI.sub.2 chalcopyrite ternary materials which is vacuum deposited in a thin "composition-graded" layer ranging from on the order ot about 2.5 microns to about 5.0 microns (.congruent.2.5 .mu.m to .congruent.5.0 .mu.m) and wherein the lower region of the photovoltaic active material preferably comprises a low resistivity region of p-type semiconductor material having a superimposed region of relatively high resistivity, transient n-type semiconductor material defining a transient p-n homojunction; and (ii), a second semiconductor layer comprising a low resistivity n-type semiconductor material; wherein interdiffusion (a) between the elemental constituents of the two discrete juxtaposed regions of the first semiconductor layer defining a transient p-n homojunction layer, and (b) between the transient n-type material in the first semiconductor layer and the second n-type semiconductor layer, causes the The Government has rights in this invention pursuant to Contract No. EG-77-C-01-4042, Subcontract No. XJ-9-8021-1 awarded by the U.S. Department of Energy.

  2. Methods for forming thin-film heterojunction solar cells from I-III-VI.sub. 2

    DOE Patents [OSTI]

    Mickelsen, Reid A.; Chen, Wen S.

    1982-01-01

    An improved thin-film, large area solar cell, and methods for forming the same, having a relatively high light-to-electrical energy conversion efficiency and characterized in that the cell comprises a p-n type heterojunction formed of: (i) a first semiconductor layer comprising a photovoltaic active material selected from the class of I-III-VI.sub.2 chalcopyrite ternary materials which is vacuum deposited in a thin "composition-graded" layer ranging from on the order of about 2.5 microns to about 5.0 microns (.congruent.2.5.mu.m to .congruent.5.0.mu.m) and wherein the lower region of the photovoltaic active material preferably comprises a low resistivity region of p-type semiconductor material having a superimposed region of relatively high resistivity, transient n-type semiconductor material defining a transient p-n homojunction; and (ii), a second semiconductor layer comprising a low resistivity n-type semiconductor material; wherein interdiffusion (a) between the elemental constituents of the two discrete juxtaposed regions of the first semiconductor layer defining a transient p-n homojunction layer, and (b) between the transient n-type material in the first semiconductor layer and the second n-type semiconductor layer, causes the transient n-type material in The Government has rights in this invention pursuant to Contract No. EG-77-C-01-4042, Subcontract No. XJ-9-8021-1 awarded by the U.S. Department of Energy.

  3. Methods for forming thin-film heterojunction solar cells from I-III-VI{sub 2}

    DOE Patents [OSTI]

    Mickelsen, R.A.; Chen, W.S.

    1985-08-13

    An improved thin-film, large area solar cell, and methods for forming the same are disclosed, having a relatively high light-to-electrical energy conversion efficiency and characterized in that the cell comprises a p-n type heterojunction formed of: (i) a first semiconductor layer comprising a photovoltaic active material selected from the class of I-III-VI{sub 2} chalcopyrite ternary materials which is vacuum deposited in a thin ``composition-graded`` layer ranging from on the order of about 2.5 microns to about 5.0 microns ({approx_equal}2.5 {mu}m to {approx_equal}5.0 {mu}m) and wherein the lower region of the photovoltaic active material preferably comprises a low resistivity region of p-type semiconductor material having a superimposed region of relatively high resistivity, transient n-type semiconductor material defining a transient p-n homojunction; and (ii) a second semiconductor layer comprising a low resistivity n-type semiconductor material; wherein interdiffusion occurs (a) between the elemental constituents of the two discrete juxtaposed regions of the first semiconductor layer defining a transient p-n homojunction layer, and (b) between the transient n-type material in the first semiconductor layer and the second n-type semiconductor layer. 16 figs.

  4. Methods for forming thin-film heterojunction solar cells from I-III-VI[sub 2

    DOE Patents [OSTI]

    Mickelsen, R.A.; Chen, W.S.

    1982-06-15

    An improved thin-film, large area solar cell, and methods for forming the same are disclosed, having a relatively high light-to-electrical energy conversion efficiency and characterized in that the cell comprises a p-n type heterojunction formed of: (1) a first semiconductor layer comprising a photovoltaic active material selected from the class of I-III-VI[sub 2] chalcopyrite ternary materials which is vacuum deposited in a thin composition-graded'' layer ranging from on the order of about 2.5 microns to about 5.0 microns ([approx equal]2.5[mu]m to [approx equal]5.0[mu]m) and wherein the lower region of the photovoltaic active material preferably comprises a low resistivity region of p-type semiconductor material having a superimposed region of relatively high resistivity, transient n-type semiconductor material defining a transient p-n homojunction; and (2), a second semiconductor layer comprising a low resistivity n-type semiconductor material; wherein interdiffusion (a) between the elemental constituents of the two discrete juxtaposed regions of the first semiconductor layer defining a transient p-n homojunction layer, and (b) between the transient n-type material in the first semiconductor layer and the second n-type semiconductor layer, is allowed.

  5. Syntheses, crystal structures and properties of series of 4d–4f ln(III)–Ag(I) heterometallic coordination polymers

    SciTech Connect (OSTI)

    Ran, Xing-Rui; Wang, Ning; Xie, Wei-Ping; Xiong, Yan-Ju; Cheng, Qian; Long, Yi; Yue, Shan-Tang; Liu, Ying-Liang

    2015-05-15

    By control of the experimental parameters such as ligands, pH value and reacting temperature, series of three-dimensional (3D) 4d–4f Ln(III)–Ag(I) porous coordination polymers (PCPs) with interesting chain-layer construction, namely, ([Ln{sup III}Ag{sup I}(na)(ina)(ox)]·2(H{sub 2}O)){sub n} [Ln=Sm(1), Eu(2), Gd(3), Tb(4), Dy(5), Ho(6), Y(7), Yb(8)], have been successfully synthesized under hydrothermal conditions and structurally characterized. All the complexes are characterized by elemental analyses, FT-IR spectroscopy, Powder X-ray diffraction (PXRD) and thermogravimetric analyses (TGA). Furthermore, the luminescence properties of compounds 2 and 4 and the magsnetic properties of complexes 3 and 5 were also investigated in detail. - Graphical abstract: Series of three-dimensional (3D) 4d–4f Ln(III)–Ag(I) porous coordination polymers (PCPs) with interesting chain-layer construction which are featured by tetranuclear Ln{sub 2}Ag{sub 2} and ‘non-linear’ N–Ag–N linkages. - Highlights: • Complexes 1–8 are first built by three kinds of organic ligands based on nicotinic acid and isonicotinic acid. • PCPs 1–8 are featured by tetranuclear Ln{sub 2}Ag{sub 2} and ‘non-linear’ N–Ag–N linkages. • The total solvent-accessible volume of PCP 2 comprises 11.6% of the crystal volume after dislodging the free water molecules. • Complexes 2 and 4 exhibit characteristic lanthanide-centered luminescence, while compounds 3 and 5 show antiferromagnetic behaviors.

  6. Grid-based methods for diatomic quantum scattering problems III: Double photoionization of molecular hydrogen in prolate spheroidal coordinates

    SciTech Connect (OSTI)

    Tao, Liang; McCurdy, Bill; Rescigno, Tom

    2010-06-10

    Our previously developed finite-element/ discrete variable representation in prolate spheroidal coordinates is extended to two-electron systems with a study of double ionization of H$_2$ with fixed-nuclei. Particular attention is paid to the development of fast and accurate methods for treating the electron-electron interaction. The use of exterior complex scaling in the implementation offers a simple way of enforcing Coulomb boundary conditions for the electronic double continuum. While the angular distributions calculated in this study are found to be completely consistent with our earlier treatments that employed single-center expansions in spherical coordinates, we find that the magnitude of the integrated cross sections are sensitive to small changes in the initial-state wave function. The present formulation offers significant advantages with respect to convergence and efficiency and opens the way to calculations on more complicated diatomic targets.

  7. Method for making graded I-III-VI.sub.2 semiconductors and solar cell obtained thereby

    DOE Patents [OSTI]

    Devaney, Walter E.

    1987-08-04

    Improved cell photovoltaic conversion efficiencies are obtained by the simultaneous elemental reactive evaporation process of Mickelsen and Chen for making semiconductors by closer control of the evaporation rates and substrate temperature during formation of the near contact, bulk, and near junction regions of a graded I-III-VI.sub.2, thin film, semiconductor, such as CuInSe.sub.2 /(Zn,Cd)S or another I-III-VI.sub.2 /II-VI heterojunction.

  8. SunShot Podcast: Concentrating Solar Power Thermal Storage Part III

    Broader source: Energy.gov [DOE]

    This SunShot Initiative podcast features Ranga Pitchumani of the U.S. Department of Energy Solar Program. In the final segment of a three-part series focused on thermal energy storage for...

  9. NREL Reports 31.1% Efficiency for III-V Solar Cell - News Releases...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conversion-efficiency mark is a world record for a two-junction solar cell measured under one-sun illumination June 24, 2013 The Energy Department's National Renewable Energy Lab ...

  10. III-V-N materials for super high-efficiency multijunction solar cells

    SciTech Connect (OSTI)

    Yamaguchi, Masafumi; Bouzazi, Boussairi; Suzuki, Hidetoshi; Ikeda, Kazuma; Kojima, Nobuaki; Ohshita, Yoshio

    2012-10-06

    We have been studying concentrator multi-junction solar cells under Japanese Innovative Photovoltaic R and D program since FY2008. InGaAsN is one of appropriate materials for 4-or 5-junction solar cell configuration because this material can be lattice-matched to GaAs and Ge substrates. However, present InGaAsN single-junction solar cells have been inefficient because of low minority-carrier lifetime due to N-related recombination centers and low carrier mobility due to alloy scattering and non-homogeneity of N. This paper presents our major results in the understanding of majority and minority carrier traps in GaAsN grown by chemical beam epitaxy and their relationships with the poor electrical properties of the materials.

  11. Charge state evolution in the solar wind. III. Model comparison with observations

    SciTech Connect (OSTI)

    Landi, E.; Oran, R.; Lepri, S. T.; Zurbuchen, T. H.; Fisk, L. A.; Van der Holst, B.

    2014-08-01

    We test three theoretical models of the fast solar wind with a set of remote sensing observations and in-situ measurements taken during the minimum of solar cycle 23. First, the model electron density and temperature are compared to SOHO/SUMER spectroscopic measurements. Second, the model electron density, temperature, and wind speed are used to predict the charge state evolution of the wind plasma from the source regions to the freeze-in point. Frozen-in charge states are compared with Ulysses/SWICS measurements at 1 AU, while charge states close to the Sun are combined with the CHIANTI spectral code to calculate the intensities of selected spectral lines, to be compared with SOHO/SUMER observations in the north polar coronal hole. We find that none of the theoretical models are able to completely reproduce all observations; namely, all of them underestimate the charge state distribution of the solar wind everywhere, although the levels of disagreement vary from model to model. We discuss possible causes of the disagreement, namely, uncertainties in the calculation of the charge state evolution and of line intensities, in the atomic data, and in the assumptions on the wind plasma conditions. Last, we discuss the scenario where the wind is accelerated from a region located in the solar corona rather than in the chromosphere as assumed in the three theoretical models, and find that a wind originating from the corona is in much closer agreement with observations.

  12. EVIDENCE FOR THE OSCILLATING TWO STREAM INSTABILITY AND SPATIAL COLLAPSE OF LANGMUIR WAVES IN A SOLAR TYPE III RADIO BURST

    SciTech Connect (OSTI)

    Thejappa, G.; Bergamo, M.; Papadopoulos, K.; MacDowall, R. J. E-mail: mbergamo@umd.edu E-mail: Robert.MacDowall@nasa.gov

    2012-03-15

    We present observational evidence for the oscillating two stream instability (OTSI) and spatial collapse of Langmuir waves in the source region of a solar type III radio burst. High time resolution observations from the STEREO A spacecraft show that Langmuir waves excited by the electron beam occur as isolated field structures with short durations {approx}3.2 ms and with high intensities exceeding the strong turbulence thresholds. These short duration events are identified as the envelope solitons which have collapsed to spatial scales of a few hundred Debye lengths. The spectra of these wave packets contain an intense peak and two sidebands, corresponding to beam-resonant Langmuir waves, and down-shifted and up-shifted daughter Langmuir waves, respectively, and low-frequency enhancements below a few hundred Hz. The frequencies and wave numbers of these spectral components satisfy the resonance conditions of the OTSI. The observed high intensities, short scale lengths, sideband spectral structures, and low-frequency enhancements strongly suggest that the OTSI and spatial collapse of Langmuir waves probably control the nonlinear beam-plasma interactions in type III radio bursts.

  13. Preussen Solar | Open Energy Information

    Open Energy Info (EERE)

    Preussen Solar Jump to: navigation, search Name: Preussen Solar Place: Berlin, Germany Zip: 10711 Sector: Solar Product: Involved in solar projects. Coordinates: 52.516074,...

  14. Luminescence based series resistance mapping of III-V multijunction solar cells

    SciTech Connect (OSTI)

    Nesswetter, Helmut; Dyck, Wilhelm; Lugli, Paolo; Bett, Andreas W.; Zimmermann, Claus G.

    2013-11-21

    A method to measure the series resistance of Ga{sub 0.5}In{sub 0.5}P/Ga(In)As/Ge triple-junction solar cells spatially resolved is developed, based on luminescence imaging. With the help of network simulations, the dependence of the local series resistance on the external subcell illumination intensities and biasing voltage is predicted and the optimum measurement conditions are clarified. Experimentally, specially prepared test cells with partially irradiated areas are used to verify the capabilities of the method. It is shown that the method is not sensitive to variations of the dark IV parameters of the subcells.

  15. Profiling the Built-In Electrical Potential in III-V Multijunction Solar Cells (Poster)

    SciTech Connect (OSTI)

    Jiang, C.-S.; Friedman, D. J.; Moutinho, H. R.; Al-Jassim, M. M.

    2006-05-01

    We have observed three electrical potentials at the top, tunneling, and bottom junctions of GnInP{sub 2}/GaAs tandem-junction solar cells, by performing the UHV-SKPM measurement. The effect of laser illumination was avoided by using GaAs laser with photon energy of 1.4 eV for the AFM operation. We also observed higher potentials at the atomic steps than on the terraces for both p-type GaInP{sub 2} epitaxial layer and p-type GaAs substrate, and found that the potential at steps of GaAs substrate depends on the step directions.

  16. A twisted flux tube model for solar prominences. III. Magnetic support

    SciTech Connect (OSTI)

    Ridgway, C.; Priest, E.R.; Amari, T. )

    1991-01-01

    The model for the support of a solar prominence in a twisted flux tube by Priest et al. (1989) is here extended to consider large deviations of the tube from cylindrical symmetry. The prominence is modeled as a finite current sheet with mass which is locally free from singularities in the magnetic field. Analytical solutions are found to the nonlinear force-free equations for the structure around the prominence for two functional forms of the field component parallel to the prominence axis. An associated mixed boundary-value problem is also solved in which the prominence is connected at its base to the photosphere, and the normal magnetic field components along the prominence and the photosphere are imposed. 21 refs.

  17. Self-assembled photosynthesis-inspired light harvesting material and solar cells containing the same

    DOE Patents [OSTI]

    Lindsey, Jonathan S.; Chinnasamy, Muthiah; Fan, Dazhong

    2009-12-15

    A solar cell is described that comprises: (a) a semiconductor charge separation material; (b) at least one electrode connected to the charge separation material; and (c) a light-harvesting film on the charge separation material, the light-harvesting film comprising non-covalently coupled, self-assembled units of porphyrinic macrocycles. The porphyrinic macrocycles preferably comprise: (i) an intramolecularly coordinated metal; (ii) a first coordinating substituent; and (iii) a second coordinating substituent opposite the first coordinating substituent. The porphyrinic macrocycles can be assembled by repeating intermolecular coordination complexes of the metal, the first coordinating substituent and the second coordinating substituent.

  18. Profiling the Built-In Electrical Potential in III-V Multijunction Solar Cells

    SciTech Connect (OSTI)

    Jiang, C.-S.; Friedman, D. J.; Moutinho, H. R.; Al-Jassim, M. M.

    2006-01-01

    We report on a direct measurement of the electrical potential on cross-sections of GaInP{sub 2}/GaAs multiple-junction solar cells by using an ultrahigh-vacuum scanning Kelvin probe microscope (UHV-SKPM). The UHV-SKPM allows us to measure the potential without air molecules being adsorbed on the cross-sectional surface. Moreover, it uses a GaAs laser with photon energy of 1.4 eV for the atomic force microscope (AFM) operation. This eliminated the light-absorption-induced bottom-junction flattening and top-junction enhancement, which happened in our previous potential measurement using a 1.85-eV laser for the AFM operation. Three potentials were measured at the top, tunneling, and bottom junctions. Values of the potentials are smaller than the potentials in the bulk. This indicates that the Fermi level on the UHV-cleaved (110) surface was pinned, presumably due to defects upon cleaving. We also observed higher potentials at atomic steps than on the terraces for both GaInP2 epitaxial layer and GaAs substrate. Combining scanning tunneling microscopy (STM) and SKPM measurements, we found that the potential height at steps of the GaAs substrate depends on the step direction, which is probably a direct result of unbalanced cations and anions at the steps.

  19. Profiling the Built-in Electrical Potential in III-V Multijunction Solar Cells: Preprint

    SciTech Connect (OSTI)

    Jiang, C.-S.; Friedman, D. J.; Moutinho, H. R.; Al-Jassim, M. M.

    2006-05-01

    We report on a direct measurement of the electrical potential on cross-sections of GaInP2/GaAs multiple-junction solar cells by using an ultrahigh-vacuum scanning Kelvin probe microscope (UHV-SKPM). The UHV-SKPM allows us to measure the potential without air molecules being adsorbed on the cross-sectional surface. Moreover, it uses a GaAs laser with photon energy of 1.4 eV for the atomic force microscope (AFM) operation. This eliminated the light-absorption-induced bottom-junction flattening and top-junction enhancement, which happened in our previous potential measurement using a 1.85-eV laser for the AFM operation. Three potentials were measured at the top, tunneling, and bottom junctions. Values of the potentials are smaller than the potentials in the bulk. This indicates that the Fermi level on the UHV-cleaved (110) surface was pinned, presumably due to defects upon cleaving. We also observed higher potentials at atomic steps than on the terraces for both GaInP2 epitaxial layer and GaAs substrate. Combining scanning tunneling microscopy (STM) and SKPM measurements, we found that the potential height at steps of the GaAs substrate depends on the step direction, which is probably a direct result of unbalanced cations and anions at the steps.

  20. SDSS-III: Massive Spectroscopic Surveys of the Distant Universe, the Milky Way Galaxy, and Extra-Solar Planetary Systems

    SciTech Connect (OSTI)

    Eisenstein, Daniel J.; Weinberg, David H.; Agol, Eric; Aihara, Hiroaki; Prieto, Carlos Allende; Anderson, Scott F.; Arns, James A.; Aubourg, Eric; Bailey, Stephen; Balbinot, Eduardo; Barkhouser, Robert; /Johns Hopkins U. /Michigan State U.

    2011-01-01

    Building on the legacy of the Sloan Digital Sky Survey (SDSS-I and II), SDSS-III is a program of four spectroscopic surveys on three scientific themes: dark energy and cosmological parameters, the history and structure of the Milky Way, and the population of giant planets around other stars. The Baryon Oscillation Spectroscopic Survey (BOSS) will measure redshifts of 1.5 million massive galaxies and Ly{alpha} forest spectra of 150,000 quasars, using the baryon acoustic oscillation (BAO) feature of large scale structure to obtain percent-level determinations of the distance scale and Hubble expansion rate at z < 0.7 and at z {approx} 2.5. SEGUE-2, a now-completed continuation of the Sloan Extension for Galactic Understanding and Exploration, measured medium-resolution (R = {lambda}/{Delta}{lambda} 1800) optical spectra of 118,000 stars in a variety of target categories, probing chemical evolution, stellar kinematics and substructure, and the mass profile of the dark matter halo from the solar neighborhood to distances of 100 kpc. APOGEE, the Apache Point Observatory Galactic Evolution Experiment, will obtain high-resolution (R {approx} 30,000), high signal-to-noise ratio (S/N {ge} 100 per resolution element), H-band (1.51 {micro}m < {lambda} < 1.70 {micro}m) spectra of 10{sup 5} evolved, late-type stars, measuring separate abundances for {approx} 15 elements per star and creating the first high-precision spectroscopic survey of all Galactic stellar populations (bulge, bar, disks, halo) with a uniform set of stellar tracers and spectral diagnostics. The Multi-object APO Radial Velocity Large-area Survey (MARVELS) will monitor radial velocities of more than 8000 FGK stars with the sensitivity and cadence (10-40 m s{sup -1}, {approx} 24 visits per star) needed to detect giant planets with periods up to two years, providing an unprecedented data set for understanding the formation and dynamical evolution of giant planet systems. As of January 2011, SDSS-III has obtained

  1. Merk Solar Energy | Open Energy Information

    Open Energy Info (EERE)

    Merk Solar Energy Jump to: navigation, search Name: Merk Solar Energy Place: Istanbul, Turkey Sector: Solar Product: Istanbul, Turkey based solar project developer. Coordinates:...

  2. Topaz Solar Farm Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Topaz Solar Farm Sector Solar Facility Type Photovoltaic Developer OptiSolar Location San Luis Obispo County, California Coordinates 35.3102296, -120.4357631 Show Map...

  3. Amargosa Farm Road Solar Energy Project Solar Power Plant | Open...

    Open Energy Info (EERE)

    Sector Solar Facility Type Concentrating Solar Power Developer Solar Millenium, LLC, MAN Ferrostaal Inc Location Nye County, Nevada Coordinates 38.5807111, -116.0413889...

  4. Phototaxis Solar | Open Energy Information

    Open Energy Info (EERE)

    Cambridge, Massachusetts Sector: Solar Product: Solar start-up planning to construct solar-panel covered roofs over parking lots. Coordinates: 43.003745, -89.017499 Show...

  5. Trinity Solar | Open Energy Information

    Open Energy Info (EERE)

    search Name: Trinity Solar Place: Freehold, New Jersey Zip: 7728 Sector: Solar Product: A provider of solar energy systems to home and business owners. Coordinates: 42.376865,...

  6. Transmission Planning Process and Opportunities for Utility-Scale Solar Engagement within the Western Electricity Coordinating Council (WECC)

    SciTech Connect (OSTI)

    Hein, J.; Hurlbut, D.; Milligan, M.; Coles, L.; Green, B.

    2011-11-01

    This report is a primer for solar developers who wish to engage directly in expediting the regulatory process and removing market barriers related to policy and planning. Market barriers unrelated to technology often limit the expansion of utility-scale solar power, even in areas with exceptional resource potential. Many of these non-technical barriers have to do with policy, regulation, and planning, and hardly ever do they resolve themselves in a timely fashion. In most cases, pre-emptive intervention by interested stakeholders is the easiest way to remove/address such barriers, but it requires knowing how to navigate the institutional waters of the relevant agencies and boards. This report is a primer for solar developers who wish to engage directly in expediting the regulatory process and removing market barriers related to policy and planning. It focuses on the Western Interconnection (WI), primarily because the quality of solar resources in the Southwest makes utility-scale concentrating solar power (CSP) and photovoltaics (PV) economically feasible, and because the relevant institutions have evolved in a way that has opened up opportunities for removing non-technical market barriers. Developers will find in this report a high-level field manual to identify the venues for mitigating and possibly eliminating systemic market obstacles and ensuring that the economic playing field is reasonably level. Project-specific issues such as siting for transmission and generation resources are beyond the scope of this report. Instead, the aim is to examine issues that pervasively affect all utility-scale PV and CSP in the region regardless of where the project may be. While the focus is on the WI, many of the institutions described here also have their counterparts in the Eastern and the Texas interconnections. Specifically, this report suggests a number of critical engagement points relating to generation and transmission planning.

  7. Performance of CPV System Using Three Types of III-V Multi-Junction Solar Cells: Preprint

    SciTech Connect (OSTI)

    Hashimoto, J.; Kurtz, S.; Sakurai, K.; Muller, M.; Otani, K.

    2012-04-01

    The performance of sister CPV systems is compared in Japan and the U.S. The conclusion is that the alignment of the systems can affect the design of the solar cells.

  8. Solar production of industrial process steam. Phase III. Operation and evaluation of the Johnson and Johnson solar facility. Final report, January 1, 1980-March 31, 1981

    SciTech Connect (OSTI)

    Brink, D.F.; Kendall, J.M.; Youngblood, S.B.

    1981-03-01

    A solar facility that generates 177/sup 0/C (350/sup 0/F) process steam has been designed and constructed by Acurex Corporation and has operated for 1 yr supplying steam to the Johnson and Johnson manufacturing plant in Sherman, Texas. The facility consists of 1068 m/sup 2/ (11,520 ft/sup 2/) of parabolic trough concentrating collectors, a 18,900 1 (5000 gal) flash boiler, and an 18.6 kW (25 hp) circulating pump. In the first year of operation the system was available 97 percent of the days, and with sufficient solar radiation available it operated 70 percent of the days during this period. The measured data showed that the collector field operated at an efficiency of 25.4 percent for the year, and that at least 75 percent of the energy reaching the flash boiler was delivered to the plant as steam. A total of 309,510 kg (682,400 lb) of steam was produced by the solar facility for the first year. An analysis of the data showed that the delivered energy was within 90 to 100 percent of the predicted value. The successful completion of the first year of operation has demonstrated the technical feasibility of generating industrial process steam with solar energy.

  9. Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas ...

  10. Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water ...

  11. Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & ...

  12. EcoSolar Systems India Ltd | Open Energy Information

    Open Energy Info (EERE)

    India Zip: 411030 Sector: Solar Product: Manufactures and distributes own-brand solar water heating systems, solar PV lanterns and a solar cooker. Coordinates: 18.52671,...

  13. Silicon materials task of the low cost solar array project (Phase III). Effects of impurities and processing on silicon solar cells. Phase III summary and seventeenth quarterly report, Volume 2: analysis of impurity behavior

    SciTech Connect (OSTI)

    Hopkins, R.H.; Davis, J.R.; Rohatgi, A.; Campbell, R.B.; Blais, P.D.; Rai-Choudhury, P.; Stapleton, R.E.; Mollenkopf, H.C.; McCormick, J.R.

    1980-01-23

    The object of this phase of the program has been to investigate the effects of various processes, metal contaminants and contaminant-process interactions on the properties of silicon and on the performance of terrestrial silicon solar cells. The study encompassed topics including thermochemical (gettering) treatments, base doping concentration, base doping type (n vs. p), grain boundary-impurity interaction, non-uniformity of impurity distribution, long term effects of impurities, as well as synergic and complexing phenomena. The program approach consists in: (1) the growth of doubly and multiply-doped silicon single crystals containing a baseline boron or phosphorus dopant and specific impurities which produce deep levels in the forbidden band gap; (2) assessment of these crystals by chemical, microstructural, electrical and solar cell tests; (3) correlation of the impurity type and concentration with crystal quality and device performance; and (4) delineation of the role of impurities and processing on subsequent silicon solar cell performance. The overall results reported are based on the assessment of nearly 200 silicon ingots. (WHK)

  14. I-III-VI.sub.2 based solar cell utilizing the structure CuInGaSe.sub.2 CdZnS/ZnO

    DOE Patents [OSTI]

    Chen, Wen S.; Stewart, John M.

    1992-01-07

    A thin film I-III-VI.sub.2 based solar cell having a first layer of copper indium gallium selenide, a second layer of cadmium zinc sulfide, a double layer of zinc oxide, and a metallization structure comprised of a layer of nickel covered by a layer of aluminum. An optional antireflective coating may be placed on said metallization structure. The cadmium zinc sulfide layer is deposited by means of an aqueous solution growth deposition process and may actually consist of two layers: a low zinc content layer and a high zinc content layer. Photovoltaic efficiencies of 12.5% at Air Mass 1.5 illumination conditions and 10.4% under AMO illumination can be achieved.

  15. Trina Solar Limited | Open Energy Information

    Open Energy Info (EERE)

    Province, China Zip: 213031 Sector: Solar Product: An integrated solar ingot, wafer, solar cell, module and system manufacturer. Coordinates: 31.766211, 119.94722 Show Map...

  16. Lotus Solar Technologies | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Lotus Solar Technologies Place: Cairo, Egypt Sector: Solar, Wind energy Product: Solar and wind energy consultants and contractors. Coordinates:...

  17. SolarNet | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: Solar project developer with subsidiaries involved in the distribution, installation and financing of solar projects. Coordinates: 38.610645,...

  18. Stateline Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Name Stateline Solar Power Plant Facility Stateline Sector Solar Facility Type Photovoltaic Developer First Solar Location San Bernardino County, California Coordinates...

  19. Blythe Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    search Name Blythe Solar Power Plant Facility Blythe Sector Solar Facility Type Photovoltaic Developer First Solar Location Blythe, California Coordinates 33.6172329,...

  20. Capital Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Jump to: navigation, search Name: Capital Solar Place: Lecce, Italy Sector: Solar Product: Lecce-based solar project developer. Coordinates: 40.357955, 18.16801 Show Map...

  1. p- to n-type conductivity transition in 1.0 eV GaInNAs solar cells controlled by the V/III ratio

    SciTech Connect (OSTI)

    Langer, Fabian Perl, Svenja; Kamp, Martin; Höfling, Sven

    2015-02-09

    In this work, we report a p- to n-type conductivity transition of GaInNAs (1.0 eV bandgap) layers in p-i-n dilute nitride solar cells continuously controlled by the V/III ratio during growth. Near the transition region, we were able to produce GaInNAs layers with very low effective electrically active doping concentrations resulting in wide depleted areas. We obtained internal quantum efficiencies (IQEs) up to 85% at 0.2 eV above the bandgap. However, the high IQE comes along with an increased dark current density resulting in a decreased open circuit voltage of about 0.2 V. This indicates the formation of non-radiant defect centers related to the p-type to n-type transition. Rapid-thermal annealing of the solar cells on the one hand helps to anneal some of these defects but on the other hand increases the effective doping concentrations.

  2. solar

    National Nuclear Security Administration (NNSA)

    2%2A en Solar power purchase for DOE laboratories http:nnsa.energy.govmediaroompressreleasessolarpower

  3. Raft River III Geothermal Project | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Development Project: Raft River III Geothermal Project Project Location Information Coordinates...

  4. Preliminary design of the Carrisa Plains solar central receiver power plant. Volume III, Book 3. Appendices. Part 2

    SciTech Connect (OSTI)

    Lee, S. K.

    1983-12-31

    The auxiliary heat transport systems of the Carrisa Plains Solar Power Plant (CPSPP) comprise facilities which are used to support plant operation and provide plant safety and maintenance. The facilities are the sodium purification system, argon cover gas system, sodium receiving and filling system, sodium-water reaction product receiving system, and safety and maintenance equipment. The functions of the facilities of the auxiliary system are described. Design requirements are established based on plant operating parameters. Descriptions are given on the system which will be adequate to perform the function and satisfy the requirements. Valve and equipment lists are included in the appendix.

  5. Magnolia Solar | Open Energy Information

    Open Energy Info (EERE)

    Magnolia Solar Jump to: navigation, search Name: Magnolia Solar Place: Woburn, Massachusetts Zip: 1801 Product: Massachusetts-based thin-film PV startup. Coordinates: 42.479195,...

  6. Radiant Solar | Open Energy Information

    Open Energy Info (EERE)

    India Zip: 500009 Sector: Solar Product: Solar products company focused on lanterns, lighting systems and water heaters. Coordinates: 17.46071, 78.49298 Show Map Loading...

  7. Elkem Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Product: Norwegian manufacturer of solar grade silicon that uses metallurgical process. Coordinates: 59.91228, 10.74998 Show Map Loading map... "minzoom":false,"map...

  8. Dimas Solar | Open Energy Information

    Open Energy Info (EERE)

    Argos, Greece Sector: Solar Product: Makes solar passive systems, particularly collectors and absorbers. Coordinates: 41.23725, -86.245919 Show Map Loading map......

  9. Green Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Jump to: navigation, search Name: Green Solar Place: Paris, France Zip: 45003 Product: Develops and builds PV systems in Guadeloupe and Mauritius. Coordinates: 48.85693,...

  10. Radiance Solar | Open Energy Information

    Open Energy Info (EERE)

    Radiance Solar Jump to: navigation, search Name: Radiance Solar Place: Atlanta, Georgia Zip: 30318 Product: Commercial and residential PV installer based in Atlanta. Coordinates:...

  11. Spire Solar | Open Energy Information

    Open Energy Info (EERE)

    Greater Boston Area Sector: Solar Product: Manufactures modules and provides PV manufacturing equipment Website: www.spirecorp.comspire-solar Coordinates: 42.4812912,...

  12. Afghan Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar power systems installer and distributor, including solar powered street lights, inverters and batteries. Coordinates: 34.53091, 69.136749 Show Map Loading map......

  13. ICE Solar | Open Energy Information

    Open Energy Info (EERE)

    India Sector: Solar Product: India-based company focused on solar PV engineering, procurement and construction opportunities. Coordinates: 17.6726, 77.5971 Show Map Loading...

  14. BP Solar | Open Energy Information

    Open Energy Info (EERE)

    Maryland Zip: 21703 Sector: Solar Product: Maryland-based subsidiary of BP Alternative Energy dealing with solar power. Website: www.bp.comgenericcountryjump. Coordinates:...

  15. Dalkia Solar | Open Energy Information

    Open Energy Info (EERE)

    Agullent, Spain Zip: 46890 Sector: Solar Product: Agullent-based installer of photovoltaic and solar thermal power plants. Coordinates: 38.824755, -0.547039 Show Map...

  16. Lumos Solar | Open Energy Information

    Open Energy Info (EERE)

    Place: Boulder, Colorado Zip: 80301 Sector: Solar Product: A supplier of solar passive water heating systems and small PV systems. Coordinates: 42.74962, -109.714163 Show...

  17. Huanting Solar | Open Energy Information

    Open Energy Info (EERE)

    Huanting Solar Jump to: navigation, search Name: Huanting Solar Place: Xiamen, Fujian Province, China Product: Chinese PV power plant developer. Coordinates: 24.45252,...

  18. FTL Solar | Open Energy Information

    Open Energy Info (EERE)

    FTL Solar develops lightweight, flexible tensile structures embedded with thin-film solar cells. Coordinates: 30.267605, -97.742984 Show Map Loading map......

  19. GA Solar | Open Energy Information

    Open Energy Info (EERE)

    Spain Zip: 28045 Sector: Solar Product: Madrid based solar project developer, owned by Spanish industrial group Corporacion Gestamp. Coordinates: 40.4203, -3.705774 Show Map...

  20. Preliminary design of the Carrisa Plains solar central receiver power plant. Volume III, Book 3. Appendices, Part 1

    SciTech Connect (OSTI)

    Mouradian, E. M.

    1983-12-31

    Thermal analyses for the preliminary design phase of the Receiver of the Carrizo Plains Solar Power Plant are presented. The sodium reference operating conditions (T/sub in/ = 610/sup 0/F, T/sub out/ = 1050/sup 0/F) have been considered. Included are: Nominal flux distribution on receiver panal, Energy input to tubes, Axial temperature distribution; sodium and tubes, Sodium flow distribution, Sodium pressure drop, orifice calculations, Temperature distribution in tube cut (R-0), Backface structure, and Nonuniform sodium outlet temperature. Transient conditions and panel front face heat losses are not considered. These are to be addressed in a subsequent design phase. Also to be considered later are the design conditions as variations from the nominal reference (operating) condition. An addendum, designated Appendix C, has been included describing panel heat losses, panel temperature distribution, and tube-manifold joint thermal model.

  1. Silicon materials task of the low cost solar array project (Phase III). Effect of impurities and processing on silicon solar cells. Phase III summary and seventeenth quarterly report, Volume 1: characterization methods for impurities in silicon and impurity effects data base

    SciTech Connect (OSTI)

    Hopkins, R.H.; Davis, J.R.; Rohatgi, A.; Campbell, R.B.; Blais, P.D.; Rai-Choudhury, P.; Stapleton, R.E.; Mollenkopf, H.C.; McCormick, J.R.

    1980-01-01

    The object of Phase III of the program has been to investigate the effects of various processes, metal contaminants and contaminant-process interactions on the performance of terrestrial silicon solar cells. The study encompassed a variety of tasks including: (1) a detailed examination of thermal processing effects, such as HCl and POCl/sub 3/ gettering on impurity behavior, (2) completion of the data base and modeling for impurities in n-base silicon, (3) extension of the data base on p-type material to include elements likely to be introduced during the production, refining, or crystal growth of silicon, (4) effects on cell performance on anisotropic impurity distributions in large CZ crystals and silicon webs, and (5) a preliminary assessment of the permanence of the impurity effects. Two major topics are treated: methods to measure and evaluate impurity effects in silicon and comprehensive tabulations of data derived during the study. For example, discussions of deep level spectroscopy, detailed dark I-V measurements, recombination lifetime determination, scanned laser photo-response, and conventional solar cell I-V techniques, as well as descriptions of silicon chemical analysis are included. Considerable data are tabulated on the composition, electrical, and solar cell characteristics of impurity-doped silicon.

  2. Sunset Reservoir Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Reservoir Solar Power Plant Facility Sunset Reservoir Sector Solar Facility Type Photovoltaic Developer Recurrent Energy Location San Francisco, California Coordinates...

  3. Panel Session III: Innovation and Coordination

    Broader source: Energy.gov [DOE]

    Presented at Refueling Infrastructure for Alternative Fuel Vehicles: Lessons Learned for Hydrogen Conference, April 2-3, 2008, Sacramento, California

  4. Apparatus for forming thin-film heterojunction solar cells employing materials selected from the class of I-III-VI.sub.2 chalcopyrite compounds

    DOE Patents [OSTI]

    Mickelsen, Reid A.; Chen, Wen S.

    1983-01-01

    Apparatus for forming thin-film, large area solar cells having a relatively high light-to-electrical energy conversion efficiency and characterized in that the cell comprises a p-n-type heterojunction formed of: (i) a first semiconductor layer comprising a photovoltaic active material selected from the class of I-III-VI.sub.2 chalcopyrite ternary materials which is vacuum deposited in a thin "composition-graded" layer ranging from on the order of about 2.5 microns to about 5.0 microns (.congruent.2.5 .mu.m to .congruent.5.0 .mu.m) and wherein the lower region of the photovoltaic active material preferably comprises a low resistivity region of p-type semiconductor material having a superimposed region of relatively high resistivity, transient n-type semiconductor material defining a transient p-n homojunction; and (ii), a second semiconductor layer comprising a low resistivity n-type semiconductor material wherein interdiffusion (a) between the elemental constituents of the two discrete juxtaposed regions of the first semiconductor layer defining a transient p-n homojunction layer, and (b) between the transient n-type material in the first semiconductor layer and the second n-type semiconductor layer, causes the transient n-type material in the first semiconductor layer to evolve into p-type material, thereby defining a thin layer heterojunction device characterized by the absence of voids, vacancies and nodules which tend to reduce the energy conversion efficiency of the system.

  5. An alternative to the plasma emission model: Particle-in-cell, self-consistent electromagnetic wave emission simulations of solar type III radio bursts

    SciTech Connect (OSTI)

    Tsiklauri, David

    2011-05-15

    High-resolution (sub-Debye length grid size and 10 000 particle species per cell), 1.5D particle-in-cell, relativistic, fully electromagnetic simulations are used to model electromagnetic wave emission generation in the context of solar type III radio bursts. The model studies generation of electromagnetic waves by a super-thermal, hot beam of electrons injected into a plasma thread that contains uniform longitudinal magnetic field and a parabolic density gradient. In effect, a single magnetic line connecting Sun to Earth is considered, for which five cases are studied. (i) We find that the physical system without a beam is stable and only low amplitude level electromagnetic drift waves (noise) are excited. (ii) The beam injection direction is controlled by setting either longitudinal or oblique electron initial drift speed, i.e., by setting the beam pitch angle (the angle between the beam velocity vector and the direction of background magnetic field). In the case of zero pitch angle, i.e., when v-vector{sub b{center_dot}}E-vector{sub perpendicular}=0, the beam excites only electrostatic, standing waves, oscillating at local plasma frequency, in the beam injection spatial location, and only low level electromagnetic drift wave noise is also generated. (iii) In the case of oblique beam pitch angles, i.e., when v-vector{sub b{center_dot}}E-vector{sub perpendicular}=0, again electrostatic waves with same properties are excited. However, now the beam also generates the electromagnetic waves with the properties commensurate to type III radio bursts. The latter is evidenced by the wavelet analysis of transverse electric field component, which shows that as the beam moves to the regions of lower density and hence lower plasma frequency, frequency of the electromagnetic waves drops accordingly. (iv) When the density gradient is removed, an electron beam with an oblique pitch angle still generates the electromagnetic radiation. However, in the latter case no frequency

  6. Don Ana Sun Tower Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Don Ana Sun Tower Sector Solar Facility Type Concentrating Solar Power Developer NRG EnergyeSolar Location Dona Ana County, New Mexico Coordinates 32.485767,...

  7. Emcore/SunPeak Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Solar Power Plant Facility EmcoreSunPeak Sector Solar Facility Type Concentrating Photovoltaic Developer SunPeak Solar Location Albuquerque, New Mexico Coordinates 35.0844909,...

  8. Cimarron I Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Name Cimarron I Solar Power Plant Facility Cimarron I Sector Solar Facility Type Photovoltaic Developer First Solar Location Colfax County, New Mexico Coordinates 36.5799757,...

  9. Desert Sunlight Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Sunlight Solar Power Plant Facility Desert Sunlight Sector Solar Facility Type Photovoltaic Developer First Solar Location Desert Center, California Coordinates 33.7541038,...

  10. Agua Caliente Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Caliente Solar Power Plant Facility Agua Caliente Solar Sector Solar Facility Type Photovoltaic Developer NextLight Renewable Power Location Yuma County, Arizona Coordinates...

  11. Golden Hills Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Hills Solar Power Plant Facility Golden Hills Solar Sector Solar Facility Type Photovoltaic Developer PowerWorks Location Alameda County, California Coordinates 37.6016892,...

  12. Premier Solar Systems Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Product: Manufactures PV cells, modules, systems, solar water pumping systems, solar water heating systems and solar garden lights. Coordinates: 17.6726, 77.5971 Show Map...

  13. Shenzhen Topray Solar Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    518108 Sector: Solar Product: Shenzhen Topray Solar Co Ltd produces amorphous silicon solar cells. Coordinates: 22.546789, 114.112556 Show Map Loading map......

  14. Medicare Coordination

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Medicare Coordination Medicare Coordination Medicare eligibility is determined by the Social Security Administration, not LANS. Contact Retiree Insurance Providers Medicare enrollment and eligibility requirements Eligibility Typically, you are eligible for Medicare: At age 65, or Before age 65, after receiving Social Security disability benefits for at least 24 months Enrollment You should receive Medicare enrollment information from the Social Security Administration (SSA) about four months

  15. Interagency Coordination

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interagency Coordination Image showing the cover of the Interagency brochure. Links to interagency pdf. The multi-faceted issues associated with naturally occurring methane hydrates demand a coordinated approach to studying (1) the potential of this resource as a U.S. fossil energy source, and (2) the possible hazards of tapping the resource. The National Methane Hydrates R&D Act of 2000 requires the development of a national methane hydrate R&D program that utilizes the talents of

  16. SolarOne Solutions | Open Energy Information

    Open Energy Info (EERE)

    Zip: 01702 Region: Greater Boston Area Sector: Solar Product: Solar powered lighting Website: www.solarone.net Coordinates: 42.276902, -71.413567 Show Map Loading...

  17. Wanxiang Solar Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Place: Hangzhou, Zhejiang Province, China Zip: 311215 Sector: Solar Product: A Chinese solar module and cell maker. Coordinates: 30.252501, 120.165024 Show Map Loading...

  18. REC Solar (Colorado) | Open Energy Information

    Open Energy Info (EERE)

    Court Place: Westminster, Colorado Zip: 80030 Region: Rockies Area Sector: Solar Product: Solar panel installer Website: recsolar.com Coordinates: 39.860526, -105.066446 Show...

  19. REC Solar (Oregon) | Open Energy Information

    Open Energy Info (EERE)

    Place: Portland, Oregon Zip: 97214 Region: Pacific Northwest Area Sector: Solar Product: Solar panel installer Website: recsolar.com Coordinates: 45.5136593, -122.657084 Show...

  20. Korea Solar Inc | Open Energy Information

    Open Energy Info (EERE)

    Inc Place: Seoul, Korea (Republic) Sector: Solar Product: Manufacturer of solar collectors, modules, and water heaters. Coordinates: 37.557121, 126.977379 Show Map Loading...

  1. Enertis Solar SL | Open Energy Information

    Open Energy Info (EERE)

    Enertis Solar SL Jump to: navigation, search Name: Enertis Solar SL Place: Madrid, Spain Zip: 28703 Product: Spain-based technical consultancy for PV projects. Coordinates:...

  2. Denmark Solar Industry DSI | Open Energy Information

    Open Energy Info (EERE)

    Copenhagen, Denmark Zip: DK-1550 Sector: Solar Product: Manufactures and distributes solar panels and systems. Coordinates: 55.67631, 12.569355 Show Map Loading map......

  3. Tessera Solar (Texas) | Open Energy Information

    Open Energy Info (EERE)

    77002 Region: Texas Area Sector: Solar Product: Developer of utility scale solar power plants based on dish-Stirling engine designs Website: www.tesserasolar.com Coordinates:...

  4. Guangxi Chengjiyongxin Solar Technology Engineering Co Ltd |...

    Open Energy Info (EERE)

    Sector: Solar Product: Mainly engages in the research, production, sale, installing, maintenance of solar technology and integration of energy-saving engineering. Coordinates:...

  5. QC Solar Suzhou Corporation | Open Energy Information

    Open Energy Info (EERE)

    Jiangsu Province, China Zip: 215123 Sector: Solar Product: Suzhou-based solar PV electronics manufacturing firm. Coordinates: 31.3092, 120.613121 Show Map Loading map......

  6. North Shore Solar & Windpower | Open Energy Information

    Open Energy Info (EERE)

    Massachusetts Zip: 01915 Region: Greater Boston Area Sector: Solar Product: Solar and wind installer Website: www.northshorewind.com Coordinates: 42.543992, -70.8819775 Show...

  7. Solar Action Webinar Series | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    The webinars were organized by the U.S. Department of Energy (DOE) Solar Office in coordination with the Solar Outreach Partnership. Innovation and Success in Organizing and ...

  8. Commercial Solar Ventures | Open Energy Information

    Open Energy Info (EERE)

    Solar Product: Portland based company that specializes in commercial scale solar installations throughout Oregon. Coordinates: 45.511795, -122.675629 Show Map Loading map......

  9. SolarCity | Open Energy Information

    Open Energy Info (EERE)

    Drive Place: Foster City, California Zip: 94404 Region: Bay Area Sector: Solar Product: Solar installer Website: www.solarcity.com Coordinates: 37.563247, -122.277403 Show...

  10. Ingenia Solar Energy | Open Energy Information

    Open Energy Info (EERE)

    Ingenia Solar Energy Jump to: navigation, search Name: Ingenia Solar Energy Place: Madrid, Spain Zip: 28034 Product: Spain-based technical consultant for PV projects. Coordinates:...

  11. Borrego Solar (Massachusetts) | Open Energy Information

    Open Energy Info (EERE)

    East Place: Lowell, Massachusetts Zip: 01852 Region: Greater Boston Area Sector: Solar Product: Design and install solar systems Website: www.borregosolar.com Coordinates:...

  12. Buzitka Solar AS | Open Energy Information

    Open Energy Info (EERE)

    Buzitka Solar AS Jump to: navigation, search Name: Buzitka Solar AS Place: Buzitka, Slovakia Zip: 985 41 Product: Slovakia based developer of PV projects. Coordinates: 48.307735,...

  13. CSG Solar AG | Open Energy Information

    Open Energy Info (EERE)

    Germany Zip: 6766 Sector: Solar Product: Manufacture of solar modules based on Crystalline Silicon on Glass (CSG) technology Coordinates: 50.70348, 12.8498 Show Map...

  14. Module Solar AG | Open Energy Information

    Open Energy Info (EERE)

    Module Solar AG Jump to: navigation, search Name: Module Solar AG Place: Baar, Switzerland Product: A Swiss PV module and materials supplier and developer Coordinates: 40.808083,...

  15. FTL Solar LLC | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: Creator of flexible, tensile structures integrated with thin film solar cells Website: www.ftlsolar.com Coordinates: 40.6498136, -73.9475554 Show Map...

  16. Contract to coordinate on-going documentation requirements associated with Title X legislation for DOE active-solar activities. Final project technical report

    SciTech Connect (OSTI)

    Not Available

    1982-06-01

    The objectives of this work were to ensure that Title X Active Solar Program reports complied with all guidance regarding length, format, coverage, tone, tables and schedules; provide necessary Conservation and Renewable Energy Office background and back-up material; follow this activity through to its completion in January 1982; assess information requirements associated with on-going documentation of Federal Buildings Program and its predecessors; establish a method for collecting, maintaining and utilizing appropriate program data specifically related to the preparation of report due in June 1982. Work on this project has generally remained on schedule and within budget. DOE-SAN has been instrumental in keeping us on track, by providing timely guidance as needed. Attached are recommendations and methods for documenting solar heat technologies research and the Title X sunset policy, planning, and evaluation long report for Active Solar Heating and Cooling Program.

  17. Better Internal Optics Can Improve III-V Solar Cell Performance (Fact Sheet), Highlights in Science, NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    model that calculates external luminescent efficiency has potential to enhance performance of solar cells dominated by radiative recombination. Researchers at the National Renewable Energy Laboratory (NREL) wanted to improve the internal optics of solar cells domi- nated by radiative recombination to significantly enhance cell per- formance. Considering real, non- idealized solar cells, the scientists developed a detailed model that calculates the external luminescent efficiency. It does so

  18. III-Nitride Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    III-Nitride Nanowires - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced

  19. Optimized III-V Multijunction Concentrator Solar Cells on Patterned Si and Ge Substrates: Final Technical Report, 15 September 2004--30 September 2006

    SciTech Connect (OSTI)

    Ringel, S. A.

    2008-11-01

    Goal is to demo realistic path to III-V multijunction concentrator efficiencies > 40% by substrate-engineering combining compositional grading with patterned epitaxy for small-area cells for high concentration.

  20. Direct Thin Film Path to Low Cost, Large Area III-V Photovoltaics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Photovoltaic Solar Photovoltaic Advanced Materials Advanced Materials Find More Like This Return to Search Direct Thin Film Path to Low Cost, Large Area III-V Photovoltaics ...

  1. The Preparation of an Ultrastable Mesoporous Cr(III)-MOF via...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Abstract: Kinetic labilization of the Fe(III)-O coordination bond in a mesoporous metal-organic framework, PCN-333-Fe(III), is realized by the reduction of Fe(III) by Cr(II). The ...

  2. EmmVee Solar Systems Pvt Ltd ESSPL | Open Energy Information

    Open Energy Info (EERE)

    Bangalore, Karnataka, India Zip: 560 024 Sector: Solar Product: Manufactures and markets solar thermal and solar photovoltaic products. Coordinates: 12.97092, 77.60482 Show...

  3. Gaskell Sun Tower and 2 others Solar Power Plant | Open Energy...

    Open Energy Info (EERE)

    Sector Solar Facility Type Concentrating Solar Power Facility Status Proposed Developer NRG EnergyeSolar Location Kern County, California Coordinates 35.4937274, -118.8596804...

  4. Saguargo Solar Power Plant Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Type Concentrating Solar Power Facility Status In Service Developer Solargenix Location Red Rock, Arizona Coordinates 32.54795, -111.292887 Show Map Loading map......

  5. NordStrom Solar GmbH | Open Energy Information

    Open Energy Info (EERE)

    NordStrom Solar GmbH Jump to: navigation, search Name: NordStrom Solar GmbH Place: Husum, Germany Zip: 25813 Sector: Solar Product: Solar PV project developer. Coordinates:...

  6. Kosmo Solar | Open Energy Information

    Open Energy Info (EERE)

    offers installation, repair, consulting, design and project management services for both solar energy and energy conservation projects. Coordinates: 42.640925, -88.413644 Show...

  7. Aspen Solar | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: Design, installation & maintenance of active, passive, and photovoltaic energy systems Website: www.aspensolar.com Coordinates: 39.649755, -106.617574...

  8. REC Solar | Open Energy Information

    Open Energy Info (EERE)

    Bay Area Sector: Solar Product: Solar installer Website: www.recsolar.comcmHome.html Coordinates: 37.3754586, -122.0085828 Show Map Loading map... "minzoom":false,"map...

  9. Prothea Solar | Open Energy Information

    Open Energy Info (EERE)

    Italy Zip: 20100 Sector: Solar Product: Milan-based greenfield developer and turn key provider of solar energy power plants. Coordinates: 45.468945, 9.18103 Show Map...

  10. Back reflectors based on buried Al{sub 2}O{sub 3} for enhancement of photon recycling in monolithic, on-substrate III-V solar cells

    SciTech Connect (OSTI)

    García, I.; Ward, J. S.; Steiner, M. A.; Geisz, J. F.; Kurtz, S. R.

    2014-09-29

    Photon management has been shown to be a fruitful way to boost the open circuit voltage and efficiency of high quality solar cells. Metal or low-index dielectric-based back reflectors can be used to confine the reemitted photons and enhance photon recycling. Gaining access to the back of the solar cell for placing these reflectors implies having to remove the substrate, with the associated added complexity to the solar cell manufacturing. In this work, we analyze the effectiveness of a single-layer reflector placed at the back of on-substrate solar cells, and assess the photon recycling improvement as a function of the refractive index of this layer. Al{sub 2}O{sub 3}-based reflectors, created by lateral oxidation of an AlAs layer, are identified as a feasible choice for on-substrate solar cells, which can produce a V{sub oc} increase of around 65% of the maximum increase attainable with an ideal reflector. The experimental results obtained using prototype GaAs cell structures show a greater than two-fold increase in the external radiative efficiency and a V{sub oc} increase of ∼2% (∼18 mV), consistent with theoretical calculations. For GaAs cells with higher internal luminescence, this V{sub oc} boost is calculated to be up to 4% relative (36 mV), which directly translates into at least 4% higher relative efficiency.

  11. SDSS-III: Massive Spectroscopic Surveys of the Distant Universe...

    Office of Scientific and Technical Information (OSTI)

    Massive Spectroscopic Surveys of the Distant Universe, the Milky Way Galaxy, and Extra-Solar Planetary Systems Citation Details In-Document Search Title: SDSS-III: Massive...

  12. Multijunction III-V Photovoltaics Research

    Broader source: Energy.gov [DOE]

    DOE invests in multijunction III-V solar cell research to drive down the costs of the materials, manufacturing, tracking techniques, and concentration methods used with this technology. Below is a...

  13. Envitec Solar GmbH | Open Energy Information

    Open Energy Info (EERE)

    Austria Sector: Solar Product: Domiciled in Austria, Envitec Solar operates as the thin-film module manufacturing arm of Envitec Energy. Coordinates: 48.056085,...

  14. Jiangsu Huilun Solar Technology Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Huilun Solar Technology Co Ltd Jump to: navigation, search Name: Jiangsu Huilun Solar Technology Co Ltd Place: Nanjing, Jiangsu Province, China Product: PV cell maker. Coordinates:...

  15. Veeco Solar Equipment formerly Mill Lane Engineering | Open Energy...

    Open Energy Info (EERE)

    corporation that designs, builds, and integrates custom solar equipment and flexible solar panel coating systems. Coordinates: 43.33937, -88.817939 Show Map Loading map......

  16. Arizona Solar Energy Industries Association | Open Energy Information

    Open Energy Info (EERE)

    Arizona Solar Energy Industries Association Name: Arizona Solar Energy Industries Association Place: Arizona Website: www.arizonasolarindustry.org Coordinates: 34.0489281,...

  17. SolarOne Solutions Inc | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: Massachusetts-based manufacturer and retailer of solar powered LED lighting systems. Coordinates: 42.28107, -71.236054 Show Map Loading map......

  18. Eti Solar Energy Technologies Inc | Open Energy Information

    Open Energy Info (EERE)

    ETI SOLAR is a renewable energy company specializing in designing, manufacturing, marketing and installing solar power systems. Coordinates: 36.979335, -85.610864 Show Map...

  19. Kinmac Solar formerly Lucky Power Technology Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Taiwan Sector: Solar Product: Taiwan-based manufacturer of solar modules, chargers, inverters, batteries and related products. Coordinates: 24.69389, 121.148064 Show Map...

  20. CalRENEW-1 Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Name CalRENEW-1 Solar Power Plant Facility CalRENEW-1 Sector Solar Facility Type Photovoltaic Developer Cleantech America Location Fresno County, California Coordinates...

  1. Nellis AFB Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Name Nellis AFB Solar Power Plant Facility Nellis AFB Sector Solar Facility Type Photovoltaic Developer Fotowatio Renewable Ventures Location Clark County, Nevada Coordinates...

  2. High Plains Ranch Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Ranch Solar Power Plant Facility High Plains Ranch Sector Solar Facility Type Photovoltaic Developer Sun Power Location Carizzo Plain, California Coordinates 35.1913858,...

  3. Baoding Solar Thermal Equipment Company | Open Energy Information

    Open Energy Info (EERE)

    Equipment Company Place: Baoding, Hebei Province, China Sector: Solar Product: Solar water heating system manufacturer. Coordinates: 38.855011, 115.480217 Show Map Loading...

  4. CHINT Solar Co Ltd aka Astronergy | Open Energy Information

    Open Energy Info (EERE)

    A subsidiary company of CHINT Group, producing multicrystalline and monocrystalline solar cells, modules, thin-film solar cells and PV application products. Coordinates:...

  5. Line-focus solar central power system, Phase I. Final report, 29 September 1978 to 30 April 1980. Volume III. Appendices

    SciTech Connect (OSTI)

    Slemmons, A J

    1980-04-01

    The conceptual design, parametric analysis, cost and performance analysis, and commercial assessment of a 100-MWe line-focus solar central receiver power plant are reported. This volume contains the appendices: (a) methods of determination of molten salt heat-transfer coefficients and tube-wall temperatures, (b) inputs for STEAEC programs, (c) description of system analysis computer program, (d) receiver analysis program, and (e) heliostat production plan and design methodology. (WHK)

  6. Solar Design Workbook

    SciTech Connect (OSTI)

    Franta, G.; Baylin, F.; Crowther, R.; Dubin, F.; Grace, A., Griffith, J.W.; Holtz, M.; Kutscher, C.; Nordham, D.; Selkowitz, S.; Villecco, M.

    1981-06-01

    This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for the solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.

  7. Joint Coordinating Committee | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Joint Coordinating Committee

  8. SECTION III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    West Virginia Smart Grid Implementation Plan Revision 1 August 20, 2009 DOE/NETL-2009/1386 West Virginia Smart Grid Implementation Plan 20 August 2009 Revision 1 Submitted to: The Honorable Joe Manchin III, Governor, State of West Virginia Submitted by: West Virginia Division of Energy National Energy Technology Laboratory US DOE Office of Electricity Delivery and Energy Reliability Research and Development Solutions (RDS) Allegheny Power American Electric Power West Virginia University

  9. PART III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contract No. DE-AC02-09CH11466 Section J TOC i PART III List of Documents, Exhibits and Other Attachments Section J - List of Attachments Table of Contents Attachment No: Attachment: J.1 Appendix A - Advance Understandings on Human Resources J.2 Appendix B - Performance and Evaluation Measurement Plan J.3 Appendix C - Special Financial Institution Account Agreement J.4 Appendix D - Budget Program J.5 Appendix E - PPPL DOE (Lessee) Ingrants J.6 Appendix F - Contractor Resources, Commitments and

  10. Career Map: Instrumentation Coordinator

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Wind Program's Career Map provides job description information for Instrumentation Coordinator positions.

  11. Towards III-V solar cells on Si: Improvement in the crystalline quality of Ge-on-Si virtual substrates through low porosity porous silicon buffer layer and annealing

    SciTech Connect (OSTI)

    Calabrese, Gabriele; Baricordi, Stefano; Bernardoni, Paolo; Fin, Samuele; Guidi, Vincenzo; Vincenzi, Donato

    2014-09-26

    A comparison between the crystalline quality of Ge grown on bulk Si and on a low porosity porous Si (pSi) buffer layer using low energy plasma enhanced chemical vapor deposition is reported. Omega/2Theta coupled scans around the Ge and Si (004) diffraction peaks show a reduction of the Ge full-width at half maximum (FWHM) of 22.4% in presence of the pSi buffer layer, indicating it is effective in improving the epilayer crystalline quality. At the same time atomic force microscopy analysis shows an increase in root means square roughness for Ge grown on pSi from 38.5 nm to 48.0 nm, as a consequence of the larger surface roughness of pSi compared to bulk Si. The effect of 20 minutes vacuum annealing at 580C is also investigated. The annealing leads to a FWHM reduction of 23% for Ge grown on Si and of 36.5% for Ge on pSi, resulting in a FWHM of 101 arcsec in the latter case. At the same time, the RMS roughness is reduced of 8.8% and of 46.5% for Ge grown on bulk Si and on pSi, respectively. The biggest improvement in the crystalline quality of Ge grown on pSi with respect to Ge grown on bulk Si observed after annealing is a consequence of the simultaneous reorganization of the Ge epilayer and the buffer layer driven by energy minimization. A low porosity buffer layer can thus be used for the growth of low defect density Ge on Si virtual substrates for the successive integration of III-V multijunction solar cells on Si. The suggested approach is simple and fast thus allowing for high throughput-, moreover is cost effective and fully compatible with subsequent wafer processing. Finally it does not introduce new chemicals in the solar cell fabrication process and can be scaled to large area silicon wafers.

  12. Shenzhen Resun Solar Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Solar Product: Resun Solar is engaged in the R&D, manufacture, sale and service of the solar cells and BIPV systems. Coordinates: 22.546789, 114.112556 Show Map Loading...

  13. Plutonium (III) and uranium (III) nitrile complexes

    SciTech Connect (OSTI)

    Enriquez, A. E.; Matonic, J. H.; Scott, B. L.; Neu, M. P.

    2002-01-01

    Iodine oxidation of uranium and plutonium metals in tetrahydrofuran and pyridine form AnI{sub 3}(THF){sub 4} and AnI{sub 3}(py){sub 4} (An = Pu, U). These compounds represent convenient entries Into solution An(III) chemistry in organic solvents. Extensions of the actinide metal oxidation methodology in nitrile solvents by I{sub 2}, AgPF{sub 6}, and TIPF{sub 6} are presented here. Treatment of Pu{sup 0} in acetonitrile with iodine yields a putative PuI{sub 3}(NCMe){sub x} intermediate which can be trapped with the tripodal nitrogen donor ligand tpza (tpza = (tris[(2-pyrazinyl)methyl]amine)) and forms the eight-coordinate complex (tpza)PuI{sub 3}(NCMe). Treatment of excess U{sup 0} metal by iodine in acetonitrile afforded a brown crystalline mixed valence complex, [U(NCMe){sub 9}][UI{sub 6}][I], instead of UI{sub 3}(NCMe){sub 4}. The analogous reaction in bezonitrile forms red crystalline UI{sub 4}(NCPh){sub 4}. In contrast, treatment of UI{sub 3}(THF){sub 4} with excess acetonitrile cleanly generates [U(NCMe){sub 9}][I]{sub 3}. Oxidation of Pu{sup 0} by either TI(I) or Ag(I) hexafluorophosphate salts generates a nine-coordinate homoleptic acetonitrile adduct [Pu(NCMe){sub 9}][PF{sub 6}]{sub 3}. Attempts to oxidize U{sub 0} with these salts were unsuccessful.

  14. Keahole Solar Power | Open Energy Information

    Open Energy Info (EERE)

    solar thermal project developer which has partnered with equipment provider Sopogy to build projects in the Hawaiian islands. Coordinates: 19.64014, -155.995678 Show Map...

  15. B Solar Ltd | Open Energy Information

    Open Energy Info (EERE)

    B-Solar Ltd Place: Raanana, Israel Product: Israeli manufacturer of bifacial silicon cells and modules. Coordinates: 32.182579, 34.87014 Show Map Loading map......

  16. Ajit Solar Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Solar Pvt Ltd Place: Jaipur, Rajasthan, India Zip: 302001 Product: Jaipur-based PV module manufacturer. Coordinates: 26.89876, 75.79636 Show Map Loading map......

  17. Moon Solar Light MSL | Open Energy Information

    Open Energy Info (EERE)

    Product: developed and distributes solar-based lighting applications using PV panels, LED lights and ultra-capacitors. Coordinates: 31.899309, 34.807999 Show Map Loading...

  18. Sierra Nevada Solar | Open Energy Information

    Open Energy Info (EERE)

    Sierra Nevada Solar Place: Sacramento, California Zip: 95828 Product: Vertically-integrated PV systems integrator and installer. Coordinates: 38.579065, -121.491014 Show Map...

  19. Eisenbeiss Solar AG | Open Energy Information

    Open Energy Info (EERE)

    domestic heating systems combining solar passive, wood burning, geothermal heat pumps and fossil fuel. Coordinates: 48.370335, 10.897892 Show Map Loading map......

  20. WPD Solare Energien | Open Energy Information

    Open Energy Info (EERE)

    Energien Jump to: navigation, search Name: WPD Solare Energien Place: Bremen, Bremen, Germany Zip: 28211 Product: Developer of PV-projects. Coordinates: 53.075166, 8.804667...

  1. Logistic Solar SA | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Logistic Solar SA Place: Malaga, Spain Zip: 29004 Product: A Spanish developer of small and medium PV and passive installation. Coordinates: 36.71832,...

  2. Solar San Jose | Open Energy Information

    Open Energy Info (EERE)

    Jose Jump to: navigation, search Name: Solar San Jose Place: San Jose, California Zip: 95112 Region: Bay Area Website: www.solarsanjose.com Coordinates: 37.3456227,...

  3. E TON Solar Tech | Open Energy Information

    Open Energy Info (EERE)

    Solar Tech Jump to: navigation, search Name: E-TON Solar Tech Place: Tainan, Taiwan Zip: 709 Product: Taiwan-based manufacturer of PV cells. Coordinates: 22.99721, 120.180862...

  4. ICP Solar Technologies Inc | Open Energy Information

    Open Energy Info (EERE)

    Zip: H3N 1W5 Sector: Solar Product: Manufactures amorphous silicon solar PV cells, and battery chargers using these cells. Coordinates: 45.512293, -73.554407 Show Map Loading...

  5. Thomas Francis Miller III - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    THOMAS FRANCIS MILLER III Principal Investigator Email: tfm@caltech.edu Dr. Miller's research group develops theoretical and computational methods to understand a variety of molecular processes, including enzyme catalysis, solar-energy conversion, dendrite formation in lithium batteries, and the dynamics of soft matter and biological systems. An important aspect of this challenge is that many systems exhibit dynamics that couple vastly different timescales and lengthscales. A primary goal of

  6. Joel W. Ager III - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    w. ager iii Principal Investigator Email: jwager@lbl.gov Dr. Ager's research interests include the fundamental electronic and transport characteristics of photovoltaic materials, development of new photoanodes and photocathodes based on abundant elements for solar fuels production, and the development of new oxide- and sulfide-based transparent conductors. In JCAP, Dr. Ager is investigating interactions of carbon-based supports with CO2-reduction electrocatalysts. His group is studying

  7. Solar cell with back side contacts

    DOE Patents [OSTI]

    Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J; Wanlass, Mark Woodbury; Clews, Peggy J

    2013-12-24

    A III-V solar cell is described herein that includes all back side contacts. Additionally, the positive and negative electrical contacts contact compoud semiconductor layers of the solar cell other than the absorbing layer of the solar cell. That is, the positive and negative electrical contacts contact passivating layers of the solar cell.

  8. Innovation and Success in Solar Financing

    Office of Energy Efficiency and Renewable Energy (EERE)

    This webinar, "Innovation and Success in Solar Financing," was originally presented on July 10, 2013 as part of the DOE SunShot Initiative's Solar Action Webinar Series. After a brief presentation about the SunShot Initiative's overarching goals, three solar coordinators discuss their strategies for solving the financial challenges associated with their state- and local-level solar energy projects.

  9. III-V Growth on Silicon Toward a Multijunction Cell

    SciTech Connect (OSTI)

    Geisz, J.; Olson, J.; McMahon, W.; Friedman, D.; Kibbler, A.; Kramer, C.; Young, M.; Duda, A.; Ward, S.; Ptak, A.; Kurtz, S.; Wanlass, M.; Ahrenkiel, P.; Jiang, C. S.; Moutinho, H.; Norman, A.; Jones, K.; Romero, M.; Reedy, B.

    2005-11-01

    A III-V on Si multijunction solar cell promises high efficiency at relatively low cost. The challenges to epitaxial growth of high-quality III-Vs on Si, though, are extensive. Lattice-matched (LM) dilute-nitride GaNPAs solar cells have been grown on Si, but their performance is limited by defects related to the nitrogen. Advances in the growth of lattice-mismatched (LMM) materials make more traditional III-Vs, such as GaInP and GaAsP, very attractive for use in multijunction solar cells on silicon.

  10. Design of Integrated III-Nitride/Non-III-Nitride Tandem Photovoltaic Devices

    SciTech Connect (OSTI)

    Toledo, N. G.; Friedman, D.J.; Farrell, R. M.; Perl, E. E.; Lin, C. T.; Bowers, J. E.; Speck, J. S.; Mishra, U. K.

    2012-03-01

    The integration of III-nitride and non-III-nitride materials for tandem solar cell applications can improve the efficiency of the photovoltaic device due to the added power contributed by the III-nitride top cell to that of high-efficiency multi-junction non-III-nitride solar cells if the device components are properly designed and optimized. The proposed tandem solar cell is comprised of a III-nitride top cell bonded to a non-III-nitride, series-constrained, multi-junction subcell. The top cell is electrically isolated, but optically coupled to the underlying subcell. The use of a III-nitride top cell is potentially beneficial when the top junction of a stand-alone non-III-nitride subcell generates more photocurrent than the limiting current of the non-III-nitride subcell. Light producing this excess current can either be redirected to the III-nitride top cell through high energy photon absorption, redirected to the lower junctions through layer thickness optimization, or a combination of both, resulting in improved total efficiency. When the non-III-nitride cell's top junction is the limiting junction, the minimum power conversion efficiency that the III-nitride top cell must contribute should compensate for the spectrum filtered from the multi-junction subcell for this design to be useful. As the III-nitride absorption edge wavelength, {lambda}{sub N}, increases, the performance of the multi-junction subcell decreases due to spectral filtering. In the most common spectra of interest (AM1.5G, AM1.5 D, and AM0), the technology to grow InGaN cells with {lambda}{sub N}<520 nm is found to be sufficient for III-nitride top cell applications. The external quantum efficiency performance, however, of state-of-the-art InGaN solar cells still needs to be improved. The effects of surface/interface reflections are also presented. The management of these reflection issues determines the feasibility of the integrated III-nitride/non-III-nitride design to improve overall cell

  11. Department of Energy Announces $8.5 Million to Advance Solar Energy Grid Integration Systems

    Broader source: Energy.gov [DOE]

    Stage III awards through DOE's Sandia National Laboratories to help advance solar energy deployment and grid reliability

  12. Gadir Solar | Open Energy Information

    Open Energy Info (EERE)

    Name: Gadir Solar Place: Madrid, Spain Zip: 28001 Product: Madrid-based manufacturer of thin-film silicon PV modules. Coordinates: 40.4203, -3.705774 Show Map Loading map......

  13. Primestar Solar | Open Energy Information

    Open Energy Info (EERE)

    Unit B Place: Arvada, Colorado Zip: 80004 Region: Rockies Area Sector: Solar Product: Thin-Film PV Website: www.primestarsolar.com Coordinates: 39.816062, -105.159927 Show...

  14. Transform Solar | Open Energy Information

    Open Energy Info (EERE)

    search Name: Transform Solar Place: Boise, Idaho Product: Idaho-based PV module maker and joint venture between Micron and Origin Energy. Coordinates: 43.60698, -116.193409...

  15. Utility-Interconnected Photovoltaic Systems STEVENS III,JOHN...

    Office of Scientific and Technical Information (OSTI)

    STEVENS III,JOHN W.; BONN,RUSSELL H.; GINN,JERRY W.; GONZALEZ,SIGIFREDO; KERN,GREG 14 SOLAR ENERGY; 24 POWER TRANSMISSION AND DISTRIBUTION; INTERCONNECTED POWER SYSTEMS;...

  16. Monticello Mill Tailings Site Operable Unit III Annual Groundwater...

    Office of Legacy Management (LM)

    ... of a buried water pipeline to an existing solar evaporation pond for water treatment. ... the Abajo Mountains, U.S. Department of Energy Monticello Mill Tailings Site OU III ...

  17. Solar Circuitry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Circuitry" with the Solar Powered Energy Kit Curriculum: Solar Power- (lightelectromagnetic radiation, electricity, circuitry, efficiency, energy transformation, subatomic ...

  18. Solar collection

    SciTech Connect (OSTI)

    Cole, S.L.

    1984-08-01

    This report contains summaries and pictures of projects funded by the Appropriate Technology Small Grants Program which include the following solar technologies: solar dish; photovoltaics; passive solar building and solar hot water system; Trombe wall; hot air panel; hybrid solar heating system; solar grain dryer; solar greenhouse; solar hot water workshops; and solar workshops.

  19. Interconnection Coordination with Environment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interconnection Coordination with Environment John Steward Topics * Interconnection Types - Large Generator Interconnect Procedures (LGIP) * Interconnection Queue - UGP * OATT Revision * Transmission Service Issues * Open Discussion - Thoughts on coordination. Interconnection Types * Generators - Small Generator Interconnection Procedures (under 20MW) - Large Generator Interconnection Procedures (over 20MW) * Load - General Requirements for Interconnection * Transmission Large Generator

  20. Sandian Contributes to Western Electricity Coordinating Council

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photovoltaic Power Plant Model Validation Guideline Contributes to Western Electricity Coordinating Council Photovoltaic Power Plant Model Validation Guideline - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure

  1. Community Shared Solar with Solarize | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Community Shared Solar with Solarize Community Shared Solar with Solarize

  2. Solar Energy Glossary | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Glossary Solar Energy Glossary The solar glossary contains definitions for technical terms related to solar power and photovoltaic (PV) technologies, including terms having to do with electricity, power generation, and concentrating solar power (CSP). A B C D E F G H I J K L M N O P Q R S T U V W Z III-V cell - A high-efficiency solar cell made from materials including Group III and Group V elements from the periodic table . A absorber - In a photovoltaic device, the material that readily

  3. Solar Policy Environment: Madison

    Broader source: Energy.gov [DOE]

    The City of Madison’s Solar America Cities project, “MadiSUN”, will coordinate and galvanize substantial local and state resources to showcase how a U.S. Midwest city can dramatically increase the use of solar energy. Madison’s approach includes a comprehensive review of zoning and land use planning, streamlining the permitting processes, development of the local workforce, and assessment of city-owned buildings for solar PV and thermal applications. The City of Madison objective is to make Madison a green capital city and a national leader in energy efficiency and renewable energy.

  4. Web Coordinator Meetings

    Office of Energy Efficiency and Renewable Energy (EERE)

    Once a month, the Office of Energy Efficiency and Renewable Energy (EERE) Web coordinators meet to ask questions, share their experiences, announce new sites, and learn about the latest updates on the EERE website.

  5. ENN Solar Energy Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Jump to: navigation, search Name: ENN Solar Energy Co Ltd Place: Langfang, Hebei Province, China Zip: 65001 Product: China-based PV module manufacturer. Coordinates:...

  6. Kindness Intelligence Solar Service KIS | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Kindness Intelligence Solar Service (KIS) Place: Nagano-Ken, Japan Zip: 385-0051 Product: Manufacturer of PV silicon modules. Coordinates: 36.11441,...

  7. Guangfeng Solar Glass Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Solar Glass Co Ltd Place: Zhangjiagang, Jiangsu Province, China Zip: 215600 Product: Chinese PV glass maker Coordinates: 31.950001, 120.449997 Show Map Loading map......

  8. Zhejiang RICH Solar Technology Corporation Ltd | Open Energy...

    Open Energy Info (EERE)

    Solar Technology Corporation Ltd Place: Jinhua, Zhejiang Province, China Product: A Chinese manufacturer of PV modules based in the Zejiang province. Coordinates: 26.5833,...

  9. Forest County Potawatomi Community Installation of Solar Photovoltaic...

    Broader source: Energy.gov (indexed) [DOE]

    Installation of Solar Photovoltaic Systems Presented by: Tansey Smith Sustainability ... THANK YOU QUESTIONS? Tansey Smith Sustainability Coordinator 5320 Wensaut Lane Crandon, ...

  10. Heckert BXT Solar GmbH | Open Energy Information

    Open Energy Info (EERE)

    BXT Solar GmbH Jump to: navigation, search Name: Heckert BXT Solar GmbH Place: Chemnitz, Germany Zip: D-09120 Product: German module manufacturer. Coordinates: 50.836375,...

  11. A O Solar Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Solar Co Ltd Jump to: navigation, search Name: A&O Solar Co Ltd Place: Beijing, China Product: China-based thin-film PV cell and module manufacturer Coordinates: 39.90601,...

  12. Geographic coordinates | Open Energy Information

    Open Energy Info (EERE)

    Property:BoundingCoordinatesSW C Property:Coordinates F Property:FirstWellCoordinates G Property:GBIGCalculatedCenter G cont. Property:GBIGSelectedCenter H Property:HPBD...

  13. WCI-III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WCI-III Texas A&M University College Station, TX February 12-16, 2005 WCI-III Steering Committee Philippe Chomaz Francesca Gulminelli Joe Natowitz Sherry Yennello

  14. Washington: Integrated Transportation Programs & Coordinated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Transportation Programs & Coordinated Regional Planning Washington: Integrated Transportation Programs & Coordinated Regional Planning November 6, 2013 - 5:42pm Addthis ...

  15. Ashtabula III | Open Energy Information

    Open Energy Info (EERE)

    III Jump to: navigation, search Name Ashtabula III Facility Ashtabula III Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Developer NextEra Energy...

  16. Solar Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia Labs Contributes to Solar Industry Innovation: A Partnership Story Customers & Partners, News, Partnership, Photovoltaic, Renewable Energy, Solar, Solar Newsletter Sandia ...

  17. National Wind Coordinating Collaborative (NWCC) | Open Energy...

    Open Energy Info (EERE)

    Coordinating Collaborative (NWCC) Jump to: navigation, search Logo: National Wind Coordinating Collaborative (NWCC) Name: National Wind Coordinating Collaborative (NWCC) Address:...

  18. Project Management Coordination Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Management Coordination Office Project Management Coordination Office The Project Management Coordination Office (PMCO) provides guidance, leadership, training, and tools ...

  19. About Solar Powering America | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About Solar Powering America About Solar Powering America About Solar Powering America Solar Powering America was formed by the U.S. Department of Energy (DOE), U.S. Department of Agriculture (USDA), Housing and Urban Development (HUD) and the Environmental Protection Agency (EPA) to coordinate their efforts in support of meeting the goals in the President's Climate Action Plan. These goals include doubling U.S. renewable energy deployment between 2012 and 2020 and installing 100 megawatts of

  20. Coordinating the competitors

    SciTech Connect (OSTI)

    Paynter, T. )

    1990-11-01

    Independent power production would provide an opportunity for investors who wished to take risks: they would be free to reap great profits if their IPP were exceptionally low-cost; but they would also risk bankruptcy if their IPP proved uncompetitive. However, independent power producers cannot operate independently. On the contrary, their operations must be continuously coordinated with each other and with utility-owned generators, in order to provide reliable power at least cost. To make IPPs a viable alternative to utility-owned generation, the apparently inconsistent requirements of independent ownership and coordinated operation must be reconciled. 1 tab.

  1. TJ Solar Cell

    SciTech Connect (OSTI)

    Friedman, Daniel

    2009-04-17

    This talk will discuss recent developments in III-V multijunction photovoltaic technology which have led to the highest-efficiency solar cells ever demonstrated. The relationship between the materials science of III-V semiconductors and the achievement of record solar cell efficiencies will be emphasized. For instance, epitaxially-grown GAInP has been found to form a spontaneously-ordered GaP/InP (111) superlattice. This ordering affects the band gap of the material, which in turn affects the design of solar cells which incorporate GaInP. For the next generation of ultrahigh-efficiency III-V solar cells, we need a new semiconductor which is lattice-matched to GaAs, has a band gap of 1 eV, and has long minority-carrier diffusion lengths. Out of a number of candidate materials, the recently-discovered alloy GaInNAs appears to have the greatest promise. This material satisfies the first two criteria, but has to date shown very low diffusion lengths, a problem which is our current focus in the development of these next-generation cells.

  2. Block coordination copolymers

    DOE Patents [OSTI]

    Koh, Kyoung Moo; Wong-Foy, Antek G; Matzger, Adam J; Benin, Annabelle I; Willis, Richard R

    2014-11-11

    The present invention provides compositions of crystalline coordination copolymers wherein multiple organic molecules are assembled to produce porous framework materials with layered or core-shell structures. These materials are synthesized by sequential growth techniques such as the seed growth technique. In addition, the invention provides a simple procedure for controlling functionality.

  3. Block coordination copolymers

    DOE Patents [OSTI]

    Koh, Kyoung Moo; Wong-Foy, Antek G; Matzger, Adam J; Benin, Annabelle I; Willis, Richard R

    2012-11-13

    The present invention provides compositions of crystalline coordination copolymers wherein multiple organic molecules are assembled to produce porous framework materials with layered or core-shell structures. These materials are synthesized by sequential growth techniques such as the seed growth technique. In addition, the invention provides a simple procedure for controlling functionality.

  4. Block coordination copolymers

    DOE Patents [OSTI]

    Koh, Kyoung Moo; Wong-Foy, Antek G.; Matzger, Adam J.; Benin, Annabelle I.; Willis, Richard R.

    2012-12-04

    The present invention provides compositions of crystalline coordination copolymers wherein multiple organic molecules are assembled to produce porous framework materials with layered or core-shell structures. These materials are synthesized by sequential growth techniques such as the seed growth technique. In addition, the invention provides a simple procedure for controlling functionality.

  5. Environmental Compliance Issue Coordination

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-01-07

    To establish the Department of Energy (DOE) requirements for coordination of significant environmental compliance issues to ensure timely development and consistent application of Departmental environmental policy and guidance. Cancels DOE O 5400.2. Para. 5a(2) and 5a(7) canceled by DOE O 231.1.

  6. Solar Thermochemical Hydrogen Production Research (STCH)

    Fuel Cell Technologies Publication and Product Library (EERE)

    Eight cycles in a coordinated set of projects for Solar Thermochemical Cycles for Hydrogen production (STCH) were self-evaluated for the DOE-EERE Fuel Cell Technologies Program at a Working Group Meet

  7. National Solar Systems | Open Energy Information

    Open Energy Info (EERE)

    National Solar Systems Place: Al-Khobar, Saudi Arabia Zip: 31952 Product: Leading system intergrator in Saudi Arabia. Coordinates: 26.28665, 50.21434 Show Map Loading map......

  8. GroupSat Solar | Open Energy Information

    Open Energy Info (EERE)

    search Name: GroupSat Solar Place: Suzhou, Jiangsu Province, China Product: CIGS PV cell and module maker based in Suzhou in China's Jiangsu Province. Coordinates: 31.3092,...

  9. III-Nitride Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Frontier Research Centers: Solid-State Lighting Science Center for Frontiers of ... III-Nitride Nanowires HomeEnergy ResearchEFRCsSolid-State Lighting Science EFRC...

  10. SECTION III: NUCLEAR THEORY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the phase-space integral ...III-1 I. S. Towner and J. C. Hardy The evaluation of V ud , experiment and theory ......

  11. NREL: Photovoltaics Research - III-V Multijunction Materials and Devices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R&D III-V Multijunction Materials and Devices R&D NREL has a strong research capability in III-V multijunction photovoltaic (PV) cells. The inverted metamorphic multijunction (IMM) technology, which is fundamentally a new technology path with breakthrough performance and cost advantages, is a particular focus. We invented and first demonstrated the IMM solar cell and introduced it to the PV industry. Our scientists earlier invented and demonstrated the first-ever multijunction PV

  12. Suspect Counterfeit Coordinators, April 2015

    Broader source: Energy.gov (indexed) [DOE]

    Sandia Site OfficeNNSA Nora Armjio SCI Coordinator 505-845-9855 mnarmij@sandia.gov Adlolfo Bachicha SCI Coordinator 505-844-0133 aabachi@sandia.gov SPR Project...

  13. COORDINATION OF DOE TECHNICAL STANDARDS

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance on the formal coordination of DOE Technical Standards in the DOE Technical Standards Program (TSP). The purpose of coordination of draft technical standards...

  14. INDUCTRACK III CONFIGURATION - A MAGLEV SYSTEM FOR HIGH LOADS - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal 100064929 Site Map Printable Version Share this resource About Search Categories (15) Advanced Materials Biomass and Biofuels Building Energy Efficiency Electricity Transmission Energy Analysis Energy Storage Geothermal Hydrogen and Fuel Cell Hydropower, Wave and Tidal Industrial Technologies Solar Photovoltaic Solar Thermal Startup America Vehicles and Fuels Wind Energy Partners (27) Visual Patent Search Success Stories Return to Search INDUCTRACK III CONFIGURATION - A

  15. Solar Easements

    Broader source: Energy.gov [DOE]

    New Hampshire's "solar skyspace easement" provisions allow property owners to create solar easements in order to create and preserve a right to unobstructed access to solar energy. Easements remain...

  16. Solar Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stationary Power/Energy Conversion Efficiency/Solar Energy/Solar Newsletter Solar Newsletter Tara Camacho-Lopez 2016-07-11T20:14:36+00:00

  17. Montana Watershed Coordination Council | Open Energy Information

    Open Energy Info (EERE)

    Coordination Council Jump to: navigation, search Logo: Montana Watershed Coordination Council Name: Montana Watershed Coordination Council Place: Helena, Montana Zip: 59604-6873...

  18. Part III The President

    Broader source: Energy.gov (indexed) [DOE]

    III The President Executive Order 13653-Preparing the United States for the Impacts of Climate Change VerDate Mar<15>2010 17:41 Nov 05, 2013 Jkt 226001 PO 00000 Frm 00001 Fmt 4717...

  19. SECTION III: NUCLEAR THEORY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Heavy quark three-body collisional energy loss in quark-gluon plasma...... III-1 C. M. Ko and Wei Liu Elliptic flow of deuterons in relativistic heavy ion ...

  20. SECTION III: NUCLEAR THEORY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ...III-1 A.M. Mukhamedzhanov, V.Z. Goldberg, G. Rogachev, E. Johnson, S. Brown, K. Kemper, A. Momotyuk, and B. Roeder The Trojan Horse Method: an Indirect Technique...

  1. First Solar Manufacturing Solar Modules

    Broader source: Energy.gov [DOE]

    In this photograph, a First Solar associate handles photovoltaic materials at the company's Ohio manufacturing plant. First Solar is an industry partner with the U.S. Department of Energy Solar...

  2. Scientists Confirm Robustness of Key Component in Ultra-High-Efficiency Solar Cell (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-05-01

    Scientists developed and tested a new, stable 1-eV metamorphic junction for a high efficiency multijunction III-V solar cell for CPV application.

  3. Department of Energy Announces $8.5 Million to Advance Solar...

    Broader source: Energy.gov (indexed) [DOE]

    of Energy's Sandia National Laboratories is investing 8.5 million for four projects that have reached Stage III of the Solar Energy Grid Integration Systems (SEGIS) program. ...

  4. Region Solar Inc Solar Inc California Renewable Energy Solar...

    Open Energy Info (EERE)

    Point Drive Fort Collins Colorado Solar Solar cell passive solar architectural glass solar grid tie inverter semiconductor flat panel display data storage http www advanced...

  5. NREL: Solar Research - Solar Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Newsletter Subscribe: To receive new issues by email, subscribe to the newsletter. The Solar Newsletter is a monthly electronic newsletter that provides information on NREL's ...

  6. Requirements to coordinate agreements, milestones and decision...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to coordinate agreements, milestones and decision documents (AMDD) Requirements to coordinate agreements, milestones and decision documents (AMDD) Environmental agreements,...

  7. CLEERS Coordination & Joint Development of Benchmark Kinetics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications CLEERS Coordination & Joint Development of Benchmark Kinetics for LNT & SCR CLEERS Coordination & Development of Catalyst Process Kinetic...

  8. Coordinating Energy Efficiency with Other Disaster Resiliency...

    Energy Savers [EERE]

    Coordinating Energy Efficiency with Other Disaster Resiliency Services Better Buildings Residential Network Program Sustainability Peer Exchange Call Series: Coordinating Energy ...

  9. Funding Opportunity Announcement: Solar Training and Education for Professionals (STEP)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Solar Training and Education for Professionals (STEP) funding program will tackle soft costs by addressing gaps in solar training and energy education, both within the solar workforce and in professions that play a crucial role in solar deployment. First, it will support coordination among the Solar Instructor Training Network (SITN), military bases, and the solar industry. This will ensure that solar instructors are well connected to solar employers, the SITN materials are up-to-date, and veterans are connected to solar training institutions. Second, it will establish new credentials in solar operations and maintenance, and mid-scale installations. Third, this funding program will enable solar training and education for professionals in indirect and related fields such as real estate, finance, insurance, fire and code enforcement, and state regulations. Finally, it will support the expansion of the Grid Engineering for Accelerated Renewable Energy Deployment (GEARED) initiative.

  10. Suspect Counterfeit Coordinators, May 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Anyone identifying names that should be changed are encouraged to provide the update information to Michael Stracka (AU-23) at 301-903-8085 michael.stracka@hq.doe.gov May 2016 Site/PSO DOE SCI Coordinators Title Fed/Contr/Sub Telephone E-mail Albuquerque Service Center Paul Romero SCI Coordinator 505-845-4149 Paul.romero@nnsa.doe.gov Ames Site Office/SC Terry Herrman SCI Program Coordinator 515-294-7896 herrman@ameslab.gov Argonne Site Office/SC Steven Gauthier SCI Coordinator 630-252-6165

  11. Risk coordination among LEPCs

    SciTech Connect (OSTI)

    Mosher, A.G.

    1995-12-31

    Public awareness of the potential dangers from accidents involving hazardous chemicals has increased dramatically in the wake of serious hazardous chemicals accidents occurring around the world. To prevent further such accidents in their communities, Congress passed the Emergency Planning and Community Right-To-Know act (EPCRA) in 1996, as part of the Superfund Amendments Reauthorization Act (SARA -- Title III). EPCRA was enacted to benefit local communities. Two of the primary objectives of the law are: to provide a basis for each community to design and develop a chemical emergency planning and response program for its individual needs, and to provide the public with the right-to-know the identity, quantity, location, and properties of hazardous materials within that community. EPCRA provides the foundation for federal, state, and local agencies and the chemical industry to work together to better protect the public health and environment. The product of EPCRA is the Local Emergency Planning Committee (LEPC). The LEPC is a vital link between the industry, government, and citizens. LEPCs should be familiar with the hazards present in their communities and should be the focal point for developing plans to respond should an accident occur.

  12. Fusion Power Demonstration III

    SciTech Connect (OSTI)

    Lee, J.D.

    1985-07-01

    This is the third in the series of reports covering the Fusion Power Demonstration (FPD) design study. This volume considers the FPD-III configuration that incorporates an octopole end plug. As compared with the quadrupole end-plugged designs of FPD-I and FPD-II, this octopole configuration reduces the number of end cell magnets and shortens the minimum ignition length of the central cell. The end-cell plasma length is also reduced, which in turn reduces the size and cost of the end cell magnets and shielding. As a contiuation in the series of documents covering the FPD, this report does not stand alone as a design description of FPD-III. Design details of FPD-III subsystems that do not differ significantly from those of the FPD-II configuration are not duplicated in this report.

  13. Nevada Solar One Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Solar One Solar Power Plant Jump to: navigation, search Name Nevada Solar One Solar Power Plant Facility Nevada Solar One Sector Solar Facility Type Concentrating Solar Power...

  14. Mojave Solar Park Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Solar Park Solar Power Plant Jump to: navigation, search Name Mojave Solar Park Solar Power Plant Facility Mojave Solar Park Sector Solar Facility Type Concentrating Solar Power...

  15. Starwood Solar I Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Starwood Solar I Solar Power Plant Jump to: navigation, search Name Starwood Solar I Solar Power Plant Facility Starwood Solar I Sector Solar Facility Type Concentrating Solar...

  16. Solar Power

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Power Solar Power Project Opportunities Abound in the Region The WIPP site is receives abundant solar energy with 6-7 kWh/sq meter power production potential As the accompanying map of New Mexico shows, the WIPP site enjoys abundant year-round sunshine. With an average solar power production potential of 6-7 kWh/sq meter per day, one exciting project being studied for location at WIPP is a 30-50 MW Solar Power Tower: The American Solar Energy Society (ASES) is is a national trade

  17. ImagineSolar | Open Energy Information

    Open Energy Info (EERE)

    Workforce training, Corporate consulting - Solar projects, Solar sales, Solar marketing, Solar business development, Solar policy, Solar advocacy, Solar government...

  18. Solar Manufacturing Projects | Department of Energy

    Office of Environmental Management (EM)

    Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects SOLAR ...

  19. Solar Rights

    Broader source: Energy.gov [DOE]

    In the context of this law, a solar energy device is a system "manufactured and sold for the sole purpose of facilitating the collection and beneficial use of solar energy, including passive...

  20. Solar Rights

    Broader source: Energy.gov [DOE]

    A solar energy system is defined as "a system affixed to a building or buildings that uses solar devices, which are thermally isolated from living space or any other area where the energy is used...

  1. Solar Blog

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    96426 Solar Blog en Solar Energy Jobs Outpace U.S. Economy http:energy.govarticlessolar-energy-jobs-outpace-us-economy

  2. Solar Rights

    Broader source: Energy.gov [DOE]

    Cities and counties in North Carolina generally may not adopt ordinances prohibiting the installation of "a solar collector that gathers solar radiation as a substitute for traditional energy for...

  3. Solar Forecasting

    Broader source: Energy.gov [DOE]

    On December 7, 2012, DOE announced $8 million to fund two solar projects that are helping utilities and grid operators better forecast when, where, and how much solar power will be produced at U.S....

  4. Solar collectors

    SciTech Connect (OSTI)

    Cassidy, V.M.

    1981-11-01

    Practical applications of solar energy in commercial, industrial and institutional buildings are considered. Two main types of solar collectors are described: flat plate collectors and concentrating collectors. Efficiency of air and hydronic collectors among the flat plate types are compared. Also several concentrators are described, including their sun tracking mechanisms. Descriptions of some recent solar installations are presented and a list representing the cross section of solar collector manufacturers is furnished.

  5. Impact of SolarSmart Subdivisions on SMUD's Distribution System

    SciTech Connect (OSTI)

    McNutt, P.; Hambrick, J.; Keesee, M.; Brown, D.

    2009-07-01

    This study analyzes the distribution impacts of high penetrations of grid-integrated renewable energy systems, specifically photovoltaic (PV) equipped SolarSmart Homes found in the Anatolia III Residential Community.

  6. Suspect Counterfeit Coordinators | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coordinators Suspect Counterfeit Coordinators May 2016 Listing of Suspect/Counterfeit Coordinators by Site/Program Secretarial Office (PSO) and title (Federal, Contractor, or Subcontractor). This listing includes email and telephone contacts for each coordinator. Suspect Counterfeit Coordinators - May 2016 (196.36 KB) More Documents & Publications Federal, Contractor, or Subcontractor FTCP Members DOE Hoisting and Rigging Technical Advisory Committee - Membership Roster

  7. Web Coordinator Meetings May 2013

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation slides and minutes from the May 16, 2013 Web coordinator meeting. Topics include Trish Cozart's presentation on statistics and site analysis, Alex Clayborne's presentation on monthly stats reports, the EERE feedback widget, and an EERE redesign update.

  8. Suspect Counterfeit Coordinators, October 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Pacific Northwest Site OfficeSC Carrie Swafford- Bennett SCI Coordinator 509-372-4931 carrie.swafford-bennett@pnso.science.doe.gov Vinh T. Nguyen Contractor 509-372-4737 ...

  9. Purchasing Solar Collectively with Solarize

    Broader source: Energy.gov [DOE]

    This video provides an overview of the concept behind The Solarize Guidebook, which offers neighborhoods a plan for getting volume discounts when making group purchases of rooftop solar energy...

  10. PrimeStar Solar Inc | Open Energy Information

    Open Energy Info (EERE)

    PrimeStar Solar Inc Place: Longmont, Colorado Zip: 80504 Product: Intends to produce CdTe thin film PV modules using technology licensed by the NREL. Coordinates: 40.16394,...