National Library of Energy BETA

Sample records for iea oecd iea

  1. International Energy Agency (IEA) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Energy Agency (IEA) International Energy Agency (IEA) History The International Energy Agency is an international energy forum comprised of 29 industrialized countries under the Organization for Economic Development and Cooperation (OECD). The IEA was established in 1974, in the wake of the 1973/74 oil crisis, to help its members respond to major oil supply disruptions, a role it continues to fulfill today. IEA's mandate has expanded over time to include tracking and analyzing

  2. International Energy Agency (IEA) | Open Energy Information

    Open Energy Info (EERE)

    Database IEA RECaBS Interactive REcalculator IEA Technology Roadmaps IEA World Energy Outlook IEA-Risk Quantification and Risk Management in Renewable Energy Projects...

  3. Sandia Energy - IEA PVPS Task 13 Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IEA PVPS Task 13 Activities Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics PV Modeling & Analysis IEA PVPS Task 13 Activities IEA PVPS Task 13...

  4. Thailand-IEA Activities | Open Energy Information

    Open Energy Info (EERE)

    Activities IEA-MoEN oil & gas emergency preparedness IEA-MoEN Biofuels Workshop (2009) Emergency Response Review (ERR) to be held in 2010 References "IEA Bilateral...

  5. IEA Webinar: Green Gas

    Broader source: Energy.gov [DOE]

    As part of the International Energy Agency (IEA) Bioenergy Internal Webinar Series, the Energy Department’s Bioenergy Technologies Office invites you to join a webinar on Thursday, June 2, 2016, at 8 a.m. Eastern Time. During the webinar, participants will learn about the technologies and feedstocks that can contribute to reaching 100% green gas in the gas grid by 2050. The international webinar—Green Gas—will be presented by Professor Jerry D. Murphy, task leader for IEA Bioenergy Task 37 on Energy from Biogas. IEA is an autonomous international organization that studies energy issues related to reliability, affordability, and sustainability. Instructions on how to join the webinar are below. View the international toll free numbers to find your dial-in number (for the United States and Canada, dial 1-888-289-4573).

  6. IEA/RFP Workshop 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    International Energy Agency (IEA) | UW Madison Plasma Physics RFP Workshop Madison, WI - 2011 Home Presentations Contact Admin ETN_Logo_Colour_WEB uwlogo_web_sm_ctr The 15th International RFP Workshop was held at the University of Wisconsin-Madison October 10-12, 2011. IEA-RFP attendees This workshop series was organized through the framework of the International Energy Agency (IEA) Implementing Agreement on the Research and Development of Reversed Field Pinches (RFP). The last workshop was held

  7. IEA Organizational Chart | Department of Energy

    Energy Savers [EERE]

    IEA Organizational Chart IEA Organizational Chart More Documents & Publications Organizational Chart Office of International Affairs Org Chart Independent Oversight Review, Idaho...

  8. Indonesia-IEA Activities | Open Energy Information

    Open Energy Info (EERE)

    Indonesia-IEA Activities Jump to: navigation, search Name Indonesia-IEA Activities AgencyCompany Organization International Energy Agency Sector Energy Focus Area Conventional...

  9. IEA Response System for Oil Supply Emergencies 2012 | Department...

    Office of Environmental Management (EM)

    Emergencies 2012 IEA Response System for Oil Supply Emergencies 2012 IEA Response System for Oil Supply Emergencies 2012.pdf (3.86 MB) More Documents & Publications IEA Response ...

  10. IEA Wind Energy Annual Report 2000

    SciTech Connect (OSTI)

    Not Available

    2001-05-01

    The twenty-third IEA Wind Energy Annual Report reviews the progress during 2000 of the activities in the Implementing Agreement for Co-operation in the Research and Development on Wind Turbine Systems under the auspices of the International Energy Agency (IEA). The agreement and its program, which is known as IEA R&D Wind, is a collaborative venture among 19 contracting parties from 17 IEA member countries and the European Commission.

  11. International Energy Agency (IEA) | Open Energy Information

    Open Energy Info (EERE)

    of Expertise in Energy Technology Case Studies in Sustainable Development in the Coal Industry China-2050 Wind Technology Roadmap China-IEA Network of Expertise in Energy...

  12. IEA Technology Roadmaps | Open Energy Information

    Open Energy Info (EERE)

    Plug-in Hybrid Vehicles Energy Efficient Buildings: heating & cooling systems Geothermal Nuclear Power Smart Grids Solar Photovoltaic Wind Energy" References "IEA Technology...

  13. IEA Ministerial Press Briefing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA Ministerial Press Briefing IEA Ministerial Press Briefing May 14, 2007 - 12:55pm Addthis Remarks Prepared for Energy Secretary Samuel Bodman Just a few words at the outset, and then I'll be happy to take questions. As an organization the IEA was founded to coordinate the response to supply disruptions. Its ability to do this was put to the test after the U.S. Gulf Coast hurricanes almost two years ago, and I'd say it worked well, and the U.S. is very appreciative of the IEA's collective

  14. IEA Energy Statistics | Open Energy Information

    Open Energy Info (EERE)

    Statistics Jump to: navigation, search Tool Summary LAUNCH TOOL Name: IEA Energy Statistics AgencyCompany Organization: International Energy Agency Sector: Energy Topics: GHG...

  15. International Energy Agency (IEA) | Open Energy Information

    Open Energy Info (EERE)

    New Zealand, Norway, Poland, Portugal, Slovak Republic, Spain, Sweden, Switzerland, Turkey, United Kingdom, United States.2 Headlines IEA Deputy Executive Director explores...

  16. IEA-Electricity Access Database | Open Energy Information

    Open Energy Info (EERE)

    - Energy Access Resource Type: Dataset Website: www.iea.orgweoelectricity.asp Language: English IEA-Electricity Access Database Screenshot References: Electricity Access...

  17. South Africa-IEA Network of Expertise in Energy Technology |...

    Open Energy Info (EERE)

    IEA Network of Expertise in Energy Technology Jump to: navigation, search Name South Africa-IEA Cooperation AgencyCompany Organization International Energy Agency Sector Energy...

  18. IEA-Technology Roadmap: Smart Grids | Open Energy Information

    Open Energy Info (EERE)

    Guidemanual Website: www.iea.orgpapers2011smartgridsroadmap.pdf Cost: Free IEA-Technology Roadmap: Smart Grids Screenshot References: Technology Roadmap: Smart...

  19. IEA-Risk Quantification and Risk Management in Renewable Energy...

    Open Energy Info (EERE)

    Energy Topics: Finance, Implementation, Market analysis Resource Type: Presentation, Lessons learnedbest practices Website: www.iea-retd.orgfilesRISK%20IEA-RETD%20(2011-6)....

  20. IEA Clean Energy Progress Report | Open Energy Information

    Open Energy Info (EERE)

    Progress Report Jump to: navigation, search Tool Summary LAUNCH TOOL Name: IEA Clean Energy Progress Report AgencyCompany Organization: International Energy Agency Sector: Energy...

  1. Asia Pacific Energy Research Centre-IEA Cooperation | Open Energy...

    Open Energy Info (EERE)

    Energy Research Centre-IEA Cooperation AgencyCompany Organization Asia Pacific Energy Research Centre, International Energy Agency Sector Energy Focus Area Conventional Energy,...

  2. IEA Renewable Energy Technology Deployment | Open Energy Information

    Open Energy Info (EERE)

    Renewable Energy Technology Deployment Jump to: navigation, search Name IEA Renewable Energy Technology Deployment AgencyCompany Organization International Energy Agency -...

  3. IEA-Technology Roadmap: Concentrating Solar Power | Open Energy...

    Open Energy Info (EERE)

    Power Screenshot References: IEA-CSP Roadmap1 "This roadmap identifies technology, economy and policy goals and milestones needed to support the development and deployment of...

  4. India-IEA Network of Expertise in Energy Technology | Open Energy...

    Open Energy Info (EERE)

    IEA Network of Expertise in Energy Technology Jump to: navigation, search Name India-IEA Cooperation AgencyCompany Organization International Energy Agency Sector Energy Focus...

  5. IEA Energy Efficiency Policy Recommendations to the 2007 G8 Summit...

    Open Energy Info (EERE)

    IEA Energy Efficiency Policy Recommendations to the 2007 G8 Summit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: IEA Energy Efficiency Policy Recommendations to the...

  6. Brazil-IEA Network of Expertise in Energy Technology | Open Energy...

    Open Energy Info (EERE)

    IEA Network of Expertise in Energy Technology Jump to: navigation, search Name Brazil-IEA Cooperation AgencyCompany Organization International Energy Agency Sector Energy Focus...

  7. China-IEA Network of Expertise in Energy Technology | Open Energy...

    Open Energy Info (EERE)

    IEA Network of Expertise in Energy Technology Jump to: navigation, search Name China-IEA Cooperation AgencyCompany Organization International Energy Agency Sector Energy Focus...

  8. Mexico-IEA Network of Expertise in Energy Technology | Open Energy...

    Open Energy Info (EERE)

    IEA Network of Expertise in Energy Technology Jump to: navigation, search Name Mexico-IEA Cooperation AgencyCompany Organization International Energy Agency Sector Energy Focus...

  9. International Collaboration on Offshore Wind Energy Under IEA Annex XXIII

    SciTech Connect (OSTI)

    Musial, W.; Butterfield, S.; Lemming, J.

    2005-11-01

    This paper defines the purpose of IEA Annex XXIII, the International Collaboration on Offshore Wind Energy. This international collaboration through the International Energy Agency (IEA) is an efficient forum from which to advance the technical and environmental experiences collected from existing offshore wind energy projects, as well as the research necessary to advance future technology for deep-water wind energy technology.

  10. Fuel Cell Technologies Program Overview: 2012 IEA HIA Hydrogen Safety Stakeholder Workshop

    Broader source: Energy.gov [DOE]

    Presentation by Sunita Satyapal at the IEA HIA Hydrogen Safety Stakeholder Workshop on October 2, 2012.

  11. IEA-GIA ExCo - National Geothermal Data System and Online Tools...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA-GIA ExCo - National Geothermal Data System and Online Tools IEA-GIA ExCo - National Geothermal Data System and Online Tools National Geothermal Data System presentation by Jay ...

  12. IEA-GIA ExCo - National Geothermal Data System and Online Tools...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA-GIA ExCo - National Geothermal Data System and Online Tools IEA-GIA ExCo - National Geothermal Data System and Online Tools National Geothermal Data System presentation by Jay...

  13. 2011 IEA Response System for Oil Supply Emergencies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA Response System for Oil Supply Emergencies 2011 IEA Response System for Oil Supply Emergencies Emergency response to oil supply disruptions has remained a core mission of the International Energy Agency since its founding in 1974. This information pamphlet explains the decisionmaking process leading to an IEA collective action, the measures available - focusing on stockdraw - and finally, the historical background of major oil supply disruptions and the IEA response to them. It also

  14. IEA: Renewable Energy to Grow During the Next 5 Years

    Broader source: Energy.gov [DOE]

    Global renewable power generation is expected to continue its rapid growth over the next five years, according to a new report from the International Energy Agency (IEA). The Medium-Term Renewable Energy Market Report 2012, released on July 5, says that despite economic uncertainties, global power generation from hydropower, solar, wind, and other renewable sources is projected to increase by more than 40% to almost 6,400 terawatt hours by 2017.

  15. IEA Implementing Agreements and Annexes: A Guide for Building Technologies Program Managers

    SciTech Connect (OSTI)

    Evans, Meredydd; Meier, Alan; Runci, Paul J.

    2008-08-05

    This guide presents insights and guidance from DOE’s gathered through longstanding and extensive participation in IEA implementing agreements (IAs) and annexes. Even though DOE has been a key participant in international research activities through the IEA since the 1970s, the experience, knowledge, and institutional memory associated with these activities can be lost or forgotten easily as key DOE managers retire or leave the department. The guide seeks to assemble in a single reference some of the learning that has occurred through participation in IEA IAs as a guide for BTP managers currently responsible for IAs and for those who might consider entering into new IEA activities in the future.

  16. IEA-GIA ExCo - National Geothermal Data System and Online Tools |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy IEA-GIA ExCo - National Geothermal Data System and Online Tools IEA-GIA ExCo - National Geothermal Data System and Online Tools National Geothermal Data System presentation by Jay Nathwani at the September 30, 2011 IEA-GIA ExCo conference in London. gtp_iea-gia_presentation_nathwani_9-30-11.pdf (1.93 MB) More Documents & Publications International Partnership for Geothermal Technology - 2012 Peer Review Presentation Innovative Exploration Technologies Subprogram

  17. Standardization of Transport Properties Measurements: Internal Energy Agency (IEA-AMT) Annex on Thermoelectric

    Office of Energy Efficiency and Renewable Energy (EERE)

    Thermoelectric materials transport properties measurements improvement and standardization is undertaken by new IEA annex under the Advanced Materials for Transportation implementing agreement

  18. CRAD, Hazard Analysis- July 25, 2014 (IEA CRAD 31-1, REV. 0)

    Broader source: Energy.gov [DOE]

    Criteria Review and Approach Document (IEA CRAD 31-1, REV. 0) provides objectives, criteria, and approaches for reviewing Nuclear Facility Hazard Analysis.

  19. CRAD, Preliminary Documented Safety Analysis- July 25, 2014 (IEA CRAD 31-2, REV. 0)

    Broader source: Energy.gov [DOE]

    This Criteria Review and Approach Document (IEA CRAD 31-2, REV. 0) provides objectives, criteria, and approaches for reviewing Nuclear Facility Preliminary Documented Safety Analysis.

  20. Funding Formulas and Arrangements under IEA Implementing Agreements

    SciTech Connect (OSTI)

    Delgado, Alison; Evans, Meredydd

    2008-12-30

    The Pacific Northwest National Laboratory has researched how participating countries divide funding obligations under International Energy Agency (IEA) Implementing Agreements (IAs). This is part of a broader assessment evaluating the buildings-area IAs. This particular part of the analysis looked at 12 IAs funded by the U.S. Department of Energy. By selecting a range of agreements, we hoped to understand the types of arrangements and the range of funding formulas. PNNL asked the U.S. Executive Committee (ExCo) members how the total contribution for their IA and its Annexes were determined, and how the total was then divided between participating countries.

  1. IEA Annex 26: Advanced Supermarket Refrigeration/Heat Recovery Systems

    SciTech Connect (OSTI)

    Baxter, VAN

    2003-05-19

    With increased concern about the impact of refrigerant leakage on global warming, a number of new supermarket refrigeration system configurations requiring significantly less refrigerant charge are being considered. In order to help promote the development of advanced systems and expand the knowledge base for energy-efficient supermarket technology, the International Energy Agency (IEA) established IEA Annex 26 (Advanced Supermarket Refrigeration/Heat Recovery Systems) under the ''IEA Implementing Agreement on Heat Pumping Technologies''. Annex 26 focuses on demonstrating and documenting the energy saving and environmental benefits of advanced systems design for food refrigeration and space heating and cooling for supermarkets. Advanced in this context means systems that use less energy, require less refrigerant and produce lower refrigerant emissions. Stated another way, the goal is to identify supermarket refrigeration and HVAC technology options that reduce the total equivalent warming impact (TEWI) of supermarkets by reducing both system energy use (increasing efficiency) and reducing total refrigerant charge. The Annex has five participating countries: Canada, Denmark, Sweden, the United Kingdom, and the United States. The working program of the Annex has involved analytical and experimental investigation of several candidate system design approaches to determine their potential to reduce refrigerant usage and energy consumption. Advanced refrigeration system types investigated include the following: distributed compressor systems--small parallel compressor racks are located in close proximity to the food display cases they serve thus significantly shortening the connecting refrigerant line lengths; secondary loop systems--one or more central chillers are used to refrigerate a secondary coolant (e.g. brine, ice slurry, or CO2) that is pumped to the food display cases on the sales floor; self-contained display cases--each food display case has its own

  2. IEA Wind Task 26 - Multi-national Case Study of the Financial...

    Open Energy Info (EERE)

    Wind Task 26 - Multi-national Case Study of the Financial Cost of Wind Energy, Work Package 1, Final Report Jump to: navigation, search Tool Summary LAUNCH TOOL Name: IEA Wind Task...

  3. Statement of Support for IEA Housing CEM Secretariat from Energy Secretary Moniz

    Broader source: Energy.gov [DOE]

    Today, U.S. Secretary of Energy Ernest Moniz released the following statement regarding the Clean Energy Ministerial (CEM) moving their secretariat to the International Energy Agency (IEA) from the...

  4. IEA Agreement on the production and utilization of hydrogen: 1996 annual report

    SciTech Connect (OSTI)

    Elam, Carolyn C. )

    1997-01-31

    The annual report includes an overview of the IEA Hydrogen Agreement, including a brief summary of hydrogen in general. The Chairman's report provides highlights for the year. Sections are included on hydrogen energy activities in the IEA Hydrogen Agreement member countries, including Canada, European Commission, Germany, Japan, Netherlands, Norway, Spain, Sweden, Switzerland, and the US. Lastly, Annex reports are given for the following tasks: Task 10, Photoproduction of Hydrogen, Task 11, Integrated Systems, and Task 12, Metal Hydrides and Carbon for Hydrogen Storage.

  5. IEA Wind Task 24 Integration of Wind and Hydropower Systems; Volume 2: Participant Case Studies

    SciTech Connect (OSTI)

    Acker, T.

    2011-12-01

    This report describes the background, concepts, issues and conclusions related to the feasibility of integrating wind and hydropower, as investigated by the members of IEA Wind Task 24. It is the result of a four-year effort involving seven IEA member countries and thirteen participating organizations. The companion report, Volume 2, describes in detail the study methodologies and participant case studies, and exists as a reference for this report.

  6. Technology status of hydrogen road vehicles. IEA technical report from the IEA Agreement of the production and utilization of hydrogen

    SciTech Connect (OSTI)

    Doyle, T.A.

    1998-01-31

    The report was commissioned under the Hydrogen Implementing Agreement of the International Energy Agency (IEA) and examines the state of the art in the evolving field of hydrogen-fueled vehicles for road transport. The first phase surveys and analyzes developments since 1989, when a comprehensive review was last published. The report emphasizes the following: problems, especially backfiring, with internal combustion engines (ICEs); operational safety; hydrogen handling and on-board storage; and ongoing demonstration projects. Hydrogen vehicles are receiving much attention, especially at the research and development level. However, there has been a steady move during the past 5 years toward integral demonstrations of operable vehicles intended for public roads. Because they emit few, or no greenhouse gases, hydrogen vehicles are beginning to be taken seriously as a promising solution to the problems of urban air quality. Since the time the first draft of the report was prepared (mid-19 96), the 11th World Hydrogen Energy Conference took place in Stuttgart, Germany. This biennial conference can be regarded as a valid updating of the state of the art; therefore, the 1996 results are included in the current version. Sections of the report include: hydrogen production and distribution to urban users; on-board storage and refilling; vehicle power units and drives, and four appendices titled: 'Safety questions of hydrogen storage and use in vehicles', 'Performance of hydrogen fuel in internal production engines for road vehicles, 'Fuel cells for hydrogen vehicles', and 'Summaries of papers on hydrogen vehicles'. (refs., tabs.)

  7. Offshore Code Comparison Collaboration within IEA Wind Annex XXIII: Phase III Results Regarding Tripod Support Structure Modeling

    SciTech Connect (OSTI)

    Nichols, J.; Camp, T.; Jonkman, J.; Butterfield, S.; Larsen, T.; Hansen, A.; Azcona, J.; Martinez, A.; Munduate, X.; Vorpahl, F.; Kleinhansl, S.; Kohlmeier, M.; Kossel, T.; Boker, C.; Kaufer, D.

    2009-01-01

    Offshore wind turbines are designed and analyzed using comprehensive simulation codes. This paper describes the findings of code-to-code verification activities of the IEA Offshore Code Comparison Collaboration.

  8. Secretary Chu to Lead Delegation to IEA Ministerial in Paris...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Secretary Chu to Speak at a Working Dinner on Global Energy Governance and the Challenges Ahead OECD Conference Centre News Media Contact: (202) 586-4940 Addthis Related Articles ...

  9. 2015 Project Peer Review International SustainabilityandIEA Bioenergy Task 38 Support

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Peer Review International Sustainability and IEA Bioenergy Task 38 Support March 25, 2015 Analysis and Sustainability Helena Chum National Renewable Energy Laboratory This presentation does not contain any proprietary, confidential, or otherwise restricted information and many BETO and global collaborators NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. #2 WBS 4.2.1.31

  10. IEA Wind Task 26: The Past and Future Cost of Wind Energy, Work Package 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IEA Wind Task 26 WP2 The Past and Future Cost of Wind Energy Leading Authors Eric Lantz: National Renewable Energy Laboratory Ryan Wiser: Lawrence Berkeley National Laboratory Maureen Hand: National Renewable Energy Laboratory NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 *

  11. Offshore Code Comparison Collaboration (OC3) for IEA Wind Task 23 Offshore Wind Technology and Deployment

    SciTech Connect (OSTI)

    Jonkman, J.; Musial, W.

    2010-12-01

    This final report for IEA Wind Task 23, Offshore Wind Energy Technology and Deployment, is made up of two separate reports, Subtask 1: Experience with Critical Deployment Issues and Subtask 2: Offshore Code Comparison Collaborative (OC3). Subtask 1 discusses ecological issues and regulation, electrical system integration, external conditions, and key conclusions for Subtask 1. Subtask 2 included here, is the larger of the two volumes and contains five chapters that cover background information and objectives of Subtask 2 and results from each of the four phases of the project.

  12. Twenty Years On!: Updating the IEA BESTEST Building Thermal Fabric Test Cases for ASHRAE Standard 140

    SciTech Connect (OSTI)

    Judkoff, R.; Neymark, J.

    2013-07-01

    ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs applies the IEA BESTEST building thermal fabric test cases and example simulation results originally published in 1995. These software accuracy test cases and their example simulation results, which comprise the first test suite adapted for the initial 2001 version of Standard 140, are approaching their 20th anniversary. In response to the evolution of the state of the art in building thermal fabric modeling since the test cases and example simulation results were developed, work is commencing to update the normative test specification and the informative example results.

  13. IEA Agreement on the Production and utilization of hydrogen: 1998 annual report

    SciTech Connect (OSTI)

    Elam, Carolyn C. )

    1999-01-31

    The annual report includes an overview of the IEA Hydrogen Agreement, including its guiding principles. The Chairman's report section includes highlights of the agreement for 1998. Annex reports are given on various tasks: Task 10, Photoproduction of Hydrogen, Task 11, Integrated Systems, and Task 12, Metal Hydrides and Carbon for Hydrogen Storage. Lastly, a feature article by Karsten Wurr, E3M Material Consulting, GmbH, Hamburg Germany, is included titled 'Hydrogen in Material Science and Technology: State of the Art and New Tendencies'.

  14. IEA Agreement on the production and utilization of hydrogen: 1999 annual report

    SciTech Connect (OSTI)

    Elam, Carolyn C. )

    2000-01-31

    The annual report begins with an overview of the IEA Hydrogen Agreement, including guiding principles and their strategic plan followed by the Chairman's report providing the year's highlights. Annex reports included are: the final report for Task 11, Integrated Systems; task updates for Task 12, Metal Hydrides and Carbon for Hydrogen Storage, Task 13, Design and Optimization of Integrated Systems, Task 14, Photoelectrolytic Production of Hydrogen, and Task 15, Photobiological Production of Hydrogen; and a feature article by Karsten Wurr titled 'Large-Scale Industrial Uses of Hydrogen: Final Development Report'.

  15. IEA agreement on the production and utilization of hydrogen: 2000 annual report

    SciTech Connect (OSTI)

    Elam, Carolyn C.

    2001-12-01

    The 2000 annual report of the IEA Hydrogen Agreement contains an overview of the agreement, including its guiding principles, latest strategic plan, and a report from the Chairman, Mr. Neil P. Rossmeissl, U.S. Department of Energy. Overviews of the National Hydrogen Programs of nine member countries are given: Canada, Japan, Lithuania, the Netherlands, Norway, Spain, Sweden, Switzerland, and the United States. Task updates are provided on the following annexes: Annex 12 - Metal Hydrides and Carbon for Hydrogen Storage, Annex 13 - Design and Optimization of Integrated Systems, Annex 14 - Photoelectrolytic Production of Hydrogen, and, Annex 15 - Photobiological Production of Hydrogen.

  16. Secretary Moniz's Remarks at the Bipartisan Policy Center on the IEA In-Depth Review of U.S. Energy Policy-- As Delivered

    Broader source: Energy.gov [DOE]

    Secretary Moniz's remarks, as delivered, at the Bipartisan Policy Center on the IEA In-Depth Review of U.S. Energy Policy on December 18, 2014 in Washington, DC.

  17. IEA Wind Task 24 Integration of Wind and Hydropower Systems; Volume 1: Issues, Impacts, and Economics of Wind and Hydropower Integration

    SciTech Connect (OSTI)

    Acker, T.

    2011-12-01

    This report describes the background, concepts, issues and conclusions related to the feasibility of integrating wind and hydropower, as investigated by the members of IEA Wind Task 24. It is the result of a four-year effort involving seven IEA member countries and thirteen participating organizations. The companion report, Volume 2, describes in detail the study methodologies and participant case studies, and exists as a reference for this report.

  18. Impacts of Large Amounts of Wind Power on Design and Operation of Power Systems; Results of IEA Collaboration

    SciTech Connect (OSTI)

    Parsons, B. and Ela, E.; Holttinen, H.; Meibom, P.; Orths, A.; O'Malley, M.; Ummels, B.C.; Tande, J.

    2008-06-01

    There are a multitude of studies completed and ongoing related to the cost of wind integration. However, the results are not easy to compare. An international forum for exchange of knowledge of power system impacts of wind power has been formed under the IEA Implementing Agreement on Wind Energy. IEA WIND R&D Task 25 on Design and Operation of Power Systems with Large Amounts of Wind Power produced a state-of-the-art report in October 2007, where the most relevant wind-power grid integration studies were analyzed, especially regarding methodologies and input data. This paper summarizes the results from 18 case studies, with discussion on differences in methodology as well as issues that have been identified to impact the cost of wind integration.

  19. Process analysis and economics of biophotolysis of water. IEA technical report from the IEA Agreement on the Production and Utilization of Hydrogen

    SciTech Connect (OSTI)

    Benemann, J.R.

    1998-03-31

    This report is a preliminary cost analysis of the biophotolysis of water and was prepared as part of the work of Annex 10 of the IEA Hydrogen agreement. Biophotolysis is the conversion of water and solar energy to hydrogen and oxygen using microalgae. In laboratory experiments at low light intensities, algal photosynthesis and some biophotolysis reactions exhibit highlight conversion efficiencies that could be extrapolated to about 10% solar efficiencies if photosynthesis were to saturate at full sunlight intensities. The most promising approach to achieving the critical goal of high conversion efficiencies at full sunlight intensities, one that appears within the capabilities of modern biotechnology, is to genetically control the pigment content of algal cells such that the photosynthetic apparatus does not capture more photons than it can utilize. A two-stage indirect biophotolysis system was conceptualized and general design parameters extrapolated. The process comprises open ponds for the CO{sub 2}fixation stage, an algal concentration step, a dark adaptation and fermentation stage, and a closed tubular photobioreactor in which hydrogen production would take place. A preliminary cost analysis for a 200 hectare (ha) system, including 140 ha of open algal ponds and 14 ha of photobioreactors was carried out. The cost analysis was based on prior studies for algal mass cultures for fuels production and a conceptual analysis of a hypothetical photochemical processes, as well as the assumption that the photobioreactors would cost about $100/m(sup 2). Assuming a very favorable location, with 21 megajoules (MJ)/m{sup 2} total insolation, and a solar conversion efficiency of 10% based on CO{sub 2} fixation in the large algal ponds, an overall cost of $10/gigajoule (GJ) is projected. Of this, almost half is due to the photobioreactors, one fourth to the open pond system, and the remainder to the H{sub 2} handling and general support systems. It must be cautioned that

  20. IEA Energy conservation in the iron and steel industry. [US and Western Europe

    SciTech Connect (OSTI)

    Tunnah, B.G.

    1981-01-01

    The NATO Committee on the Challenges of Modern Society research program, under the auspices of the IEA, had the objectives of collecting data on material requirements and energy-consumption patterns in selected energy-intensive industries in the US and Western Europe, of identifying technologies and operating practices with the potential for energy conservation in those industries, and of recommending research projects that could lead to improved energy efficiency. The steel industry was selected for analysis and ideas for an international cooperative program were developed. Representatives from various countries conducted meetings and the form of an implementing agreement for a research and development program was finalized in December, 1980. The program includes three technical areas: hot-surface inspection, heat recovery, and coal gasification. Hot-surface inspection methods to be demonstrated are: optical, induction, electromagnetic ultrasonic, electromagnetic ultrasonic surface testing methods, and eddy current method for hot surface inspection and an infrared system (possibly). Three heat-recovery projects are: ceramic heat wheel development; demonstration of granular bed/heat pipe system for heat recovery; and demonstration of tubular ceramic recuperators. Processes in coal gasification are: converter process, gas treatment, and iron treatment. Each project is described in detail. (MCW)

  1. Twenty Years On!: Updating the IEA BESTEST Building Thermal Fabric Test Cases for ASHRAE Standard 140: Preprint

    SciTech Connect (OSTI)

    Judkoff, R.; Neymark, J.

    2013-07-01

    ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs applies the IEA BESTEST building thermal fabric test cases and example simulation results originally published in 1995. These software accuracy test cases and their example simulation results, which comprise the first test suite adapted for the initial 2001 version of Standard 140, are approaching their 20th anniversary. In response to the evolution of the state of the art in building thermal fabric modeling since the test cases and example simulation results were developed, work is commencing to update the normative test specification and the informative example results.

  2. IEA Wind Task 26. Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007–2012

    SciTech Connect (OSTI)

    Vitina, Aisma; Lüers, Silke; Wallasch, Anna-Kathrin; Berkhout, Volker; Duffy, Aidan; Cleary, Brendan; Husabø, Lief I.; Weir, David E.; Lacal-Arántegui, Roberto; Hand, Maureen; Lantz, Eric; Belyeu, Kathy; Wiser, Ryan H; Bolinger, Mark; Hoen, Ben

    2015-06-01

    The International Energy Agency Implementing Agreement for cooperation in Research, Development, and Deployment of Wind Energy Systems (IEA Wind) Task 26—The Cost of Wind Energy represents an international collaboration dedicated to exploring past, present and future cost of wind energy. This report provides an overview of recent trends in wind plant technology, cost, and performance in those countries that are currently represented by participating organizations in IEA Wind Task 26: Denmark, Germany, Ireland, Norway, and the United States as well as the European Union.

  3. International Energy Agency Building Energy Simulation Test and Diagnostic Method (IEA BESTEST): In-Depth Diagnostic Cases for Ground Coupled Heat Transfer Related to Slab-on-Grade Construction

    SciTech Connect (OSTI)

    Neymark, J.; Judkoff, R.; Beausoleil-Morrison, I.; Ben-Nakhi, A.; Crowley, M.; Deru, M.; Henninger, R.; Ribberink, H.; Thornton, J.; Wijsman, A.; Witte, M.

    2008-09-01

    This report documents a set of idealized in-depth diagnostic test cases for use in validating ground-coupled floor slab heat transfer models. These test cases represent an extension to IEA BESTEST.

  4. Offshore Code Comparison Collaboration, Continuation within IEA Wind Task 30: Phase II Results Regarding a Floating Semisubmersible Wind System: Preprint

    SciTech Connect (OSTI)

    Robertson, A.; Jonkman, J.; Vorpahl, F.; Popko, W.; Qvist, J.; Froyd, L.; Chen, X.; Azcona, J.; Uzungoglu, E.; Guedes Soares, C.; Luan, C.; Yutong, H.; Pengcheng, F.; Yde, A.; Larsen, T.; Nichols, J.; Buils, R.; Lei, L.; Anders Nygard, T.; et al.

    2014-03-01

    Offshore wind turbines are designed and analyzed using comprehensive simulation tools (or codes) that account for the coupled dynamics of the wind inflow, aerodynamics, elasticity, and controls of the turbine, along with the incident waves, sea current, hydrodynamics, and foundation dynamics of the support structure. This paper describes the latest findings of the code-to-code verification activities of the Offshore Code Comparison Collaboration, Continuation (OC4) project, which operates under the International Energy Agency (IEA) Wind Task 30. In the latest phase of the project, participants used an assortment of simulation codes to model the coupled dynamic response of a 5-MW wind turbine installed on a floating semisubmersible in 200 m of water. Code predictions were compared from load-case simulations selected to test different model features. The comparisons have resulted in a greater understanding of offshore floating wind turbine dynamics and modeling techniques, and better knowledge of the validity of various approximations. The lessons learned from this exercise have improved the participants? codes, thus improving the standard of offshore wind turbine modeling.

  5. IEA Wind Task 26. Wind Technology, Cost and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States. 2007 - 2012

    SciTech Connect (OSTI)

    Vitina, Aisma; Luers, Silke; Wallasch, Anna-Kathrin; Berkhout, Volker; Duffy, Aidan; Cleary, Brendan; Husabo, Leif I.; Weir, David E.; Lacal-Arantegui, Roberto; Hand, M. Maureen; Lantz, Eric; Belyeu, Kathy; Wiser, Ryan; Bolinger, Mark; Hoen, Ben

    2015-06-12

    This report builds from a similar previous analysis (Schwabe et al., 2011) exploring the differences in cost of wind energy in 2008 among countries participating in IEA Wind Task 26 at that time. The levelized cost of energy (LCOE) is a widely recognized metric for understanding how technology, capital investment, operations, and financing impact the life-cycle cost of building and operating a wind plant. Schwabe et al. (2011) apply a spreadsheet-based cash flow model developed by the Energy Research Centre of the Netherlands (ECN) to estimate LCOE. This model is a detailed, discounted cash flow model used to represent the various cost structures in each of the participating countries from the perspective of a financial investor in a domestic wind energy project. This model is used for the present analysis as well, and comparisons are made for those countries who contributed to both reports, Denmark, Germany, and the United States.

  6. Overall review of work carried out at Grimethorpe in collaboration with US DOE and EPRI and under IEA Agreement on PFBC (pressurised fluidised bed combustion), 1985-1987

    SciTech Connect (OSTI)

    Not Available

    1990-06-01

    Between 1984 and 1988, the Grimethorpe Pressurized Fluidized Bed Combustion (PFBC) Facility was operated for the UK BCC/CEGB Joint Programme on PFBC. Additional funding was obtained from the US Department of Energy (for investigation of operation using a wet slurry feed system), EPRI (for testing an advanced gas filtration device) and as an extension of the IEA Agreement in PFBC (for design of the wet slurry feed system, and further studies into the use of wet slurry). Co-operation with the US DOE extended to the investigation of metal wastage in a new tube bank, Tube Bank E', involving a US boiler manufacture, Foster Wheeler Development Corporation. The report outlines the results of this collaborative work including combustor performance, operation and performance of the wet slurry feeding system, operation and performance of the EPRI HTHP Filter, and performance of research instrumentation. It also summarizes materials aspects of the collaborative work, including those aspects of the tube bank metal wastage investigation which can be released into the public domain. 39 refs., 27 figs., 17 tabs.

  7. IEA Wind Task 26 - Multi-national Case Study of the Financial Cost of Wind Energy; Work Package 1 Final Report

    SciTech Connect (OSTI)

    Schwabe, P.; Lensink, S.; Hand, M.

    2011-03-01

    The lifetime cost of wind energy is comprised of a number of components including the investment cost, operation and maintenance costs, financing costs, and annual energy production. Accurate representation of these cost streams is critical in estimating a wind plant's cost of energy. Some of these cost streams will vary over the life of a given project. From the outset of project development, investors in wind energy have relatively certain knowledge of the plant's lifetime cost of wind energy. This is because a wind energy project's installed costs and mean wind speed are known early on, and wind generation generally has low variable operation and maintenance costs, zero fuel cost, and no carbon emissions cost. Despite these inherent characteristics, there are wide variations in the cost of wind energy internationally, which is the focus of this report. Using a multinational case-study approach, this work seeks to understand the sources of wind energy cost differences among seven countries under International Energy Agency (IEA) Wind Task 26 - Cost of Wind Energy. The participating countries in this study include Denmark, Germany, the Netherlands, Spain, Sweden, Switzerland, and the United States. Due to data availability, onshore wind energy is the primary focus of this study, though a small sample of reported offshore cost data is also included.

  8. A guidebook for insulated low-slope roof systems. IEA Annex 19, Low-slope roof systems: International Energy Agency Energy Conservation in Buildings and Community Systems Programme

    SciTech Connect (OSTI)

    Not Available

    1994-02-01

    Low-slope roof systems are common on commercial and industrial buildings and, to a lesser extent, on residential buildings. Although insulating materials have nearly always been a component of low-slope roofs, the amount of insulation used has increased in the past two decades because of escalation of heating and cooling costs and increased awareness of the need for energy conservation. As the amount of insulation has increased, the demand has intensified for design, installation, and maintenance information specifically for well-insulated roofs. Existing practices for design, installation, and maintenance of insulated roofs have evolved from experience. Typically, these practices feature compromises due to the different properties of materials making up a given roof system. Therefore, they should be examined from time to time to ensure that they are appropriate as new materials continue to enter the market and as the data base on existing systems expands. A primary purpose of this International Energy Agency (IEA) study is to assess current roofing insulation practices in the context of an accumulating data base on performance.

  9. Second generation sodium heat pipe receiver for a USAB V-160 Stirling engine: Evaluation of on-sun test results using the proposed IEA guidelines and analysis of heat pipe damage

    SciTech Connect (OSTI)

    Laing, D.; Traebing, C.

    1997-11-01

    Dish/Stirling technology has demonstrated the highest conversion efficiencies of all solar thermal conversion systems. At the DLR a second generation sodium heat pipe receiver for the Schlaich Bergermann und Partner (SBP) 9-kW{sub e} dish/Stirling system has been developed and constructed. Long-term operation occurred from Oct. 1992 until Aug. 1993 at the Plataforma Solar de Almeria (PSA) in Spain, accumulating 950 operating hours. The performance of the SBP 9-kW{sub e} system with a sodium heat pipe receiver is evaluated according to the guidelines for dish/Stirling performance evaluation by Stine and Powel, as proposed to the International Energy Agency (IEA). Tests were stopped due to a leak in the receiver absorber surface. The analysis of this damage is reported.

  10. Fossil and synthetic fuels: miscellaneous. Part 1. Hearings before the Subcommittee on Fossil and Synthetic Fuels of the Committee on Energy and Commerce, House of Representatives, Ninety-Seventh Congress, First Session on Extension of IEA antitrust defense authorities, February 26, 1981, H. R. 2166, Department of Transportation authorization request, April 8, 1981, Gasohol usage in federal vehicles, July 30, 1981

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    Part I of the hearing record covers testimony relating to the extension of antitrust defense availability to the International Energy Agency (IEA); an authorization request by the Department of Transportation (DOT) to comply with pipeline safety regulations; and the administration's reluctance to promote gasohol use in federal vehicles. The first day's hearing included discussion of H.R. 2166, which extended the IEA authority by amending the Energy Policy and Conservation Act, and the testimony of four witnesses representing federal agencies involved in international affairs. On the second day, three DOT witnesses described pipeline-safety programs, enforcement, and procedures, with emphasis on the transport of liquefied natural gas. On the third day, nine witnesses representing gasohol-producing states, the US Army Equipment Research and Development Command, federal fleet services, and DOE examined the appropriateness and compliance record of Executive Order 12261 mandating gasohol for federally owned or leased vehicles. At issue was the need to convert Midwest grains to fuel at a time when oil is plentiful, the performance of alcohol fuels, and the administration's preference for working through the marketplace. Additional material submitted for the record follows each day's testimony. (DCK)

  11. Heat pump concepts for nZEB Technology developments, design tools and testing of heat pump systems for nZEB in the USA: Country report IEA HPT Annex 40 Task 2, Task 3 and Task 4 of the USA

    SciTech Connect (OSTI)

    Baxter, Van D.; Payne, W. Vance; Ling, Jiazhen; Radermacher, Reinhard

    2015-12-01

    The IEA HPT Annex 40 "Heat pump concepts for Nearly Zero Energy Buildings" deals with the application of heat pumps as a core component of the HVAC system for Nearly or Net Zero energy buildings (nZEB). This report covers Task 2 on the system comparison and optimisation and Task 3 dedicated to the development of adapted technologies for nZEB and field monitoring results of heat pump systems in nZEB. In the US team three institutions are involved and have worked on the following projects: The Oak Ridge National Laboratory (ORNL) will summarize development activities through the field demonstration stage for several integrated heat pump (IHP) systems electric ground-source (GS-IHP) and air-source (AS-IHP) versions and an engine driven AS-IHP version. The first commercial GS-IHP product was just introduced to the market in December 2012. This work is a contribution to Task 3 of the Annex. The University of Maryland will contribute a software development project to Task 2 of the Annex. The software ThermCom evaluates occupied space thermal comfort conditions accounting for all radiative and convective heat transfer effects as well as local air properties. The National Institute of Standards and Technology (NIST) is working on a field study effort on the NIST Net Zero Energy Residential Test Facility (NZERTF). This residential building was constructed on the NIST campus and officially opened in summer 2013. During the first year, between July 2013 and June 2014, baseline performance of the NZERTF was monitored under a simulated occupancy protocol. The house was equipped with an air-to-air heat pump which included a dedicated dehumidification operating mode. Outdoor conditions, internal loads and modes of heat pump operation were monitored. Field study results with respect to heat pump operation will be reported and recommendations on heat pump optimization for a net zero energy building will be provided. This work is a contribution to Task 3 of the Annex.

  12. ASEAN-IEA Activities | Open Energy Information

    Open Energy Info (EERE)

    Policiesdeployment programs, Technology characterizations Resource Type Workshop, Training materials Country Indonesia, Malaysia, Singapore, Thailand, Philippines, Vietnam,...

  13. IEA World Energy Outlook | Open Energy Information

    Open Energy Info (EERE)

    Energy Agency's flagship publication and leading source of analysis of global energy trends - presents updated projections of energy demand, production, trade and...

  14. IEA Response System for Oil Supply Emergencies

    Office of Energy Efficiency and Renewable Energy (EERE)

    Emergency response to oil supply disruptions has remained a core mission of the International Energy Agency since its founding in 1974. This information pamphlet explains the decision making...

  15. IEA Implementing Agreements | Open Energy Information

    Open Energy Info (EERE)

    this property., "Western & Eastern Europe" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean,...

  16. The IEA's role in advanced geothermal drilling.

    SciTech Connect (OSTI)

    Hoover, Eddie Ross; Jelacic, Allan; Finger, John Travis; Tyner, Craig E.

    2004-06-01

    This paper describes an 'Annex', or task, that is part of the International Energy Agency's Geothermal Implementing Agreement. Annex 7 is aimed at improving the state of the art in geothermal drilling, and has three subtasks: an international database on drilling cost and performance, a 'best practices' drilling handbook, and collaborative testing among participating countries. Drilling is an essential and expensive part of geothermal exploration, production, and maintenance. High temperature, corrosive fluids, and hard, fractured formations increase the cost of drilling, logging, and completing geothermal wells, compared to oil and gas. Cost reductions are critical because drilling and completing the production and injection well field can account for approximately half the capital cost for a geothermal power project. Geothermal drilling cost reduction can take many forms, e.g., faster drilling rates, increased bit or tool life, less trouble (twist-offs, stuck pipe, etc.), higher per-well production through multilaterals, and others. Annex 7 addresses all aspects of geothermal well construction, including developing a detailed understanding of worldwide geothermal drilling costs, understanding geothermal drilling practices and how they vary across the globe, and development of improved drilling technology. Objectives for Annex 7 include: (1) Quantitatively understand geothermal drilling costs and performance from around the world and identify ways to improve costs, performance, and productivity. (2) Identify and develop new and improved technologies for significantly reducing the cost of geothermal well construction. (3) Inform the international geothermal community about these drilling technologies. (4) Provide a vehicle for international cooperation, collaborative field tests, and data sharing toward the development and demonstration of improved geothermal drilling technology.

  17. IEA RECaBS Interactive REcalculator | Open Energy Information

    Open Energy Info (EERE)

    include the economic values of various externalities - air emissions, system integration, security of supply, employment - in your calculations. It provides the basis for...

  18. IEA Renewables in Southeast Asian Countries: Trends and Potentials...

    Open Energy Info (EERE)

    policy recommendations to encourage effective and efficient exploitation of renewable energy in Southeast Asia. As production is growing rapidly in the region, biofuels and...

  19. IEA Policies and Measures Database | Open Energy Information

    Open Energy Info (EERE)

    Energy Agency Sector: Energy Focus Area: Renewable Energy, Energy Efficiency, Climate Change Topics: Policiesdeployment programs, Background analysis Resource Type: Dataset...

  20. The Iea'S Role In Advanced Geothermal Drilling | Open Energy...

    Open Energy Info (EERE)

    increase the cost of drilling, logging, and completing geothermal wells, compared to oil and gas. Cost reductions are critical because drilling and completing the production...

  1. IEA Energy Technology Data Exchange | Open Energy Information

    Open Energy Info (EERE)

    member countries with access to the widest range of information on energy research, science and technology and to increase dissemination of this information to developing...

  2. IEA Webinar: Cascading of woody biomass definitions, policies, and effects

    Energy Savers [EERE]

    IDENTIFY AND PROTECT YOUR VITAL RECORDS IDENTIFY AND PROTECT YOUR VITAL RECORDS To comply with the statutory and regulatory requirements, the Department of Energy (DOE) issued DOE O 243.2, Vital Records, which sets forth requirements and responsibilities for implementing and maintaining a vital records program IDENTIFY AND PROTECT YOUR VITAL RECORDS (112.57 KB) More Documents & Publications Identify and Protect Your Vital Records DOE O 243.1B, Records Management Program DISPOSITION

  3. Annex 7 - The Iea'S Role In Advanced Geothermal Drilling | Open...

    Open Energy Info (EERE)

    Geothermal Drilling Abstract No abstract prepared. Authors John Travis Finger and Eddie Ross Hoover Published Publisher Not Provided, Date Not Provided DOI Not Provided Check for...

  4. IEA Unveils Clean Energy Progress Report in London | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    courtesy of the Department of Energy and Climate Change. Erin R. Pierce Erin R. Pierce Former Digital Communications Specialist, Office of Public Affairs What are the key facts? ...

  5. IEA Response System for Oil Supply Emergencies 2011

    Broader source: Energy.gov (indexed) [DOE]

    and increasing the efficiency of energy use. To promote international collaboration on energy technology. To assist in the integration of environmental and energy policies. ...

  6. IEA: Tracking Clean Energy Progress: Energy Technology Perspectives 2012

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report, released by International Energy Agency at the third Clean Energy Ministerial in London, measures progress in the global development and deployment of energy-efficient and clean energy...

  7. Wyoming Dry Natural Gas Production (Million Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    OECD/IEA - 2008 © OECD/IEA - 2008 © OECD/IEA - 2008 To Cover... To Cover To Cover ... ... Transport Energy and CO 2 Where are we going? What are the dangers? How do we change direction? Primarily reporting on: IEA WEO 2008 IEA ETP 2008 On-going work with IEA's Mobility Model One or two detours to talk about modelling © OECD/IEA - 2008 0 2 000 4 000 6 000 8 000 10 000 12 000 14 000 16 000 18 000 1980 1990 2000 2010 2020 2030 Mtoe Other renewables Hydro Nuclear

  8. World Energy Outlook 2008

    U.S. Energy Information Administration (EIA) Indexed Site

    OECD/IEA - 2008 © OECD/IEA - 2008 © OECD/IEA - 2008 To Cover... To Cover To Cover ... ... Transport Energy and CO 2 Where are we going? What are the dangers? How do we change direction? Primarily reporting on: IEA WEO 2008 IEA ETP 2008 On-going work with IEA's Mobility Model One or two detours to talk about modelling © OECD/IEA - 2008 0 2 000 4 000 6 000 8 000 10 000 12 000 14 000 16 000 18 000 1980 1990 2000 2010 2020 2030 Mtoe Other renewables Hydro Nuclear

  9. Paris, France: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Energy Agency (IEA) Organisation for Economic Co-Operation and Development (OECD) Renewable Energy Policy Network for the 21st Century (REN21) Registered Energy...

  10. International Atomic Energy Agency (IAEA) | Open Energy Information

    Open Energy Info (EERE)

    Sustainable Development (WPISD). Partners include the OECD International Energy Agency (IEA), UN Department of Economic and Social Affairs (DESA), Eurostat, and the European...

  11. Slide 1

    U.S. Energy Information Administration (EIA) Indexed Site

    © OECD/IEA, 2008 OECD/IEA, 2008 30 30 th th Anniversary of the EIA Anniversary of the EIA Washington, 7 Washington, 7 - - 8 April 2008 8 April 2008 Energy Statistics at the IEA: Energy Statistics at the IEA: From Supply to Energy Efficiency From Supply to Energy Efficiency Will the G8 Hokkaido Summit constitute a milestone on Will the G8 Hokkaido Summit constitute a milestone on the road to a global database on efficiency? the road to a global database on efficiency? Karen Tréanton Energy

  12. O

    U.S. Energy Information Administration (EIA) Indexed Site

    O ECD/IEA 2 013 © O ECD/IEA 2 013 Interna'onal E nergy S ta's'cs and t he C hanging O il M ap E IA E nergy C onference Washington, D C, J une 1 8, 2 013 © O ECD/IEA 2 013 New map, new challenges © O ECD/IEA 2 013 Statistics versus the market  OECD d ata a re i ncreasingly l ess r epresenta've  OECD c ountries < 5 0% o f g lobal d emand  Ascent o f n on---OECD m eans l ess v isibility  Great s trides i n J ODI d ata, b ut s 'll r oom f or i mprovement  OECD c ountries h ave

  13. Summary Article: IEA HPP Annex 36: Quality Installation / Quality Maintenance Sensitivity Studies

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hourahan, Glenn; Domanski, Piotr; Baxter, Van D.

    2015-01-01

    The outcome from this Annex activity clearly identifies that poorly designed, installed, and/or maintained heat pumps operate inefficiently and waste considerable energy compared to their as-designed potential. Additionally, it is clear that small faults for a given field-observed practice are significant, that some attribute deviations (in various equipment applications and geographical locations) have a larger impact than others, and that multiple faults or deviations have a cumulative impact on heat pump performance.

  14. IEA-GIA ExCo - National Geothermal Data System and Online Tools

    Broader source: Energy.gov (indexed) [DOE]

    ... To advance remote temperature prediction ... Induced Seismicity in Enhanced Geothermal Systems Array Information Technology ... Geothermal Energy Conference * US Draft Induced ...

  15. Tubing wastage in fluidized-bed coal combustors: Test Series 2 NCB (IEA Grimethorpe) Ltd

    SciTech Connect (OSTI)

    Witherell, C.E.; Meisenheimer, R.G.

    1988-01-08

    This study of wasted heat-exchanger tubing from the Grimethorpe PFBC Facility was conducted to characterize affected fireside surfaces and identify the mechanism/s responsible. Examinations showed that the wasted surfaces are not typical of those produced by erosion alone, as oxide deposits are present on all surfaces. Continual exfoliation of the normally-protective oxide layer is probably responsible for a major portion of tubing wastage. There are also indications of direct metal loss occurring through a series of events wherein repeated formation and exfoliation of surface oxides produce an irregular metal interface that is mechanically deformed during combustor operation. Cold-worked metal protrusions, or platelets, on the roughened surface readily fracture from the tubing wall and are lost into the bed. In some combustors where metal temperatures generally are above 600 C (1100 F), sulfidation-oxidation corrosion has been identified as the mechanism responsible for metal loss. These occurrences have largely been confined to air heater tubes, uncooled support members, and the like. However, the more perplexing type of metal wastage in FBCs/endash/and that which is the subject of this study/endash/has occurred at much lower metal temperatures of about 400 C (750 F) in in-bed water-cooled tubes. There have been differences of opinion over its cause but the consensus is that erosion is a major factor, if not the sole cause. Examinations have shown that wasted surfaces of heat exchanger tubing from this combustor are the product of combined mechanical, chemical, and thermal effects, all interrelated to produce rapid and localized metal loss. 33 refs., 29 figs., 3 tabs.

  16. IEA Wind Task 26: The Past and Future Cost of Wind Energy, Work Package 2

    SciTech Connect (OSTI)

    Lantz, E.; Wiser, R.; Hand, M.

    2012-05-01

    Over the past 30 years, wind power has become a mainstream source of electricity generation around the world. However, the future of wind power will depend a great deal on the ability of the industry to continue to achieve cost of energy reductions. In this summary report, developed as part of the International Energy Agency Wind Implementing Agreement Task 26, titled 'The Cost of Wind Energy,' we provide a review of historical costs, evaluate near-term market trends, review the methods used to estimate long-term cost trajectories, and summarize the range of costs projected for onshore wind energy across an array of forward-looking studies and scenarios. We also highlight the influence of high-level market variables on both past and future wind energy costs.

  17. Final draft: IEA Task 1. Report on Subtask D, optimization of solar heating and cooling systems

    SciTech Connect (OSTI)

    Freeman, T.L.

    1981-03-01

    A review of general techniques and specific methods useful in the optimization of solar heating and cooling systems is undertaken. A discussion of the state-of-the-art and the principal problems in both the simplified thermal performance analysis and economic analysis portions of the optimization problem are presented. Sample economic analyses are performed using several widely used economic criteria. The predicted thermal results of one typical, widely used simplified method is compared to detailed simulation results. A methodology for and the results of a sensitivity study of key economic parameters in the life cycle cost method are presented. Finally, a simple graphical optimization technique based on the life cycle cost method is proposed.

  18. Offshore Code Comparison Collaboration within IEA Wind Annex XXIII: Phase II Results Regarding Monopile Foundation Modeling

    SciTech Connect (OSTI)

    Jonkman, J.; Butterfield, S.; Passon, P.; Larsen, T.; Camp, T.; Nichols, J.; Azcona, J.; Martinez, A.

    2008-01-01

    This paper presents an overview and describes the latest findings of the code-to-code verification activities of the Offshore Code Comparison Collaboration, which operates under Subtask 2 of the International Energy Agency Wind Annex XXIII.

  19. Renewable Energy to be Half of Global Generation Increase to 2035: IEA |

    Broader source: Energy.gov (indexed) [DOE]

    Remarks as prepared for delivery by Acting Deputy Secretary of Energy Jeffrey Kupfer; State of Environmental Justice in America; May 22, 2008; Washington, DC. U.S. Department of Energy Environmental Justice Strategy (April 1995) (49.09 KB) More Documents & Publications Environmental Justice Five-Year Implementation Plan Environmental Justice at the U.S. Department of Energy - A Decade of Progress A Review of the Department of Energy's Implementation of Executive Order 12898 and

  20. Russia-IEA Network of Expertise in Energy Technology | Open Energy...

    Open Energy Info (EERE)

    Russia-IEANetworkofExpertiseinEnergyTechnology&oldid329172" Feedback Contact needs updating Image needs updating Reference needed Missing content Broken link Other...

  1. International Energy Agency (IEA) Greenhouse Gas (GHG) Weyburn-Midale CO₂ Monitoring and Storage Project

    SciTech Connect (OSTI)

    Sacuta, Norm; Young, Aleana; Worth, Kyle

    2015-12-22

    The IEAGHG Weyburn-Midale CO₂ Monitoring and Storage Project (WMP) began in 2000 with the first four years of research that confirmed the suitability of the containment complex of the Weyburn oil field in southeastern Saskatchewan as a storage location for CO₂ injected as part of enhanced oil recovery (EOR) operations. The first half of this report covers research conducted from 2010 to 2012, under the funding of the United States Department of Energy (contract DEFE0002697), the Government of Canada, and various other governmental and industry sponsors. The work includes more in-depth analysis of various components of a measurement, monitoring and verification (MMV) program through investigation of data on site characterization and geological integrity, wellbore integrity, storage monitoring (geophysical and geochemical), and performance/risk assessment. These results then led to the development of a Best Practices Manual (BPM) providing oilfield and project operators with guidance on CO₂ storage and CO₂-EOR. In 2013, the USDOE and Government of Saskatchewan exercised an optional phase of the same project to further develop and deploy applied research tools, technologies, and methodologies to the data and research at Weyburn with the aim of assisting regulators and operators in transitioning CO₂-EOR operations into permanent storage. This work, detailed in the second half of this report, involves seven targeted research projects – evaluating the minimum dataset for confirming secure storage; additional overburden monitoring; passive seismic monitoring; history-matched modelling; developing proper wellbore design; casing corrosion evaluation; and assessment of post CO₂-injected core samples. The results from the final and optional phases of the Weyburn-Midale Project confirm the suitability of CO₂-EOR fields for the injection of CO₂, and further, highlight the necessary MMV and follow-up monitoring required for these operations to be considered permanent storage.

  2. National Geothermal Data System & Online Tools Presentation (IEA-GIA event)

    SciTech Connect (OSTI)

    Jay Nathwani

    2011-09-30

    Geothermal Technologies Program presentation by Jay Nathwani on the National Geothermal Data System, 9-30-2011.

  3. IEA Wind Task 34 (WREN) Quarterly Webinar #3: Understanding Avian Collision Rate Modeling

    Broader source: Energy.gov [DOE]

    Wind farms can impact birds through collisions. Collision rate models have been developed to estimate the perceived risk to birds and the potential number of collisions within proposed wind farms....

  4. OECD | OpenEI Community

    Open Energy Info (EERE)

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  5. Markets to Facilitate Wind and Solar Energy Integration in the Bulk Power Supply: An IEA Task 25 Collaboration; Preprint

    SciTech Connect (OSTI)

    Milligan, M.; Holttinen, H.; Soder, L.; Clark, C.; Pineda, I.

    2012-09-01

    Wind and solar power will give rise to challenges in electricity markets regarding flexibility, capacity adequacy, and the participation of wind and solar generators to markets. Large amounts of wind power will have impacts on bulk power system markets and electricity prices. If the markets respond to increased wind power by increasing investments in low-capital, high-cost or marginal-cost power, the average price may remain in the same range. However, experiences so far from Denmark, Germany, Spain, and Ireland are such that the average market prices have decreased because of wind power. This reduction may result in additional revenue insufficiency, which may be corrected with a capacity market, yet capacity markets are difficult to design. However, the flexibility attributes of the capacity also need to be considered. Markets facilitating wind and solar integration will include possibilities for trading close to delivery (either by shorter gate closure times or intraday markets). Time steps chosen for markets can enable more flexibility to be assessed. Experience from 5- and 10-minute markets has been encouraging.

  6. Tubing wastage in fluidized-bed coal combustors: Examinations of tubing from Test Series 2, NCB (IEA Grimethorpe) Ltd. Facility

    SciTech Connect (OSTI)

    Witherell, C.E.; Meisenheimer, R.G.

    1987-10-30

    This study of wasted heat-exchanger tubing from the Grimethorpe PFBC Facility was conducted to characterize affected fireside surfaces and identify the mechanism/s responsible. Examinations showed that the wasted surfaces are not typical of those produced by erosion alone, as oxide deposits are present on all surfaces. Continual exfoliation of the normally-protective oxide layer is probably responsible for a major portion of tubing wastage. There are also indications of direct metal loss occurring through a series of events wherein repeatd formation and exfoliation of surface oxides produce an irregular metal interface that is mechanically deformed during combustor operation. The cold-worked metal protrusions, or platelets, on the roughened surface readily fracture from the tubing wall and are lost into the bed. 27 refs., 23 figs., 3 tabs.

  7. IEA Bioenergy Task 40Sustainable International Bioenergy Trade:Securing Supply and Demand Country Report 2014—United States

    SciTech Connect (OSTI)

    Hess, J. Richard; Lamers, Patrick; Roni, Mohammad S.; Jacobson, Jacob J.; Heath, Brendi

    2015-01-01

    Logistical barrier are tied to feedstock harvesting, collection, storage and distribution. Current crop harvesting machinery is unable to selectively harvest preferred components of cellulosic biomass while maintaining acceptable levels of soil carbon and minimizing erosion. Actively managing biomass variability imposes additional functional requirements on biomass harvesting equipment. A physiological variation in biomass arises from differences in genetics, degree of crop maturity, geographical location, climatic events, and harvest methods. This variability presents significant cost and performance risks for bioenergy systems. Currently, processing standards and specifications for cellulosic feedstocks are not as well-developed as for mature commodities. Biomass that is stored with high moisture content or exposed to moisture during storage is susceptible to spoilage, rotting, spontaneous combustion, and odor problems. Appropriate storage methods and strategies are needed to better define storage requirements to preserve the volume and quality of harvested biomass over time and maintain its conversion yield. Raw herbaceous biomass is costly to collect, handle, and transport because of its low density and fibrous nature. Existing conventional, bale-based handling equipment and facilities cannot cost-effectively deliver and store high volumes of biomass, even with improved handling techniques. Current handling and transportation systems designed for moving woodchips can be inefficient for bioenergy processes due to the costs and challenges of transporting, storing, and drying high-moisture biomass. The infrastructure for feedstock logistics has not been defined for the potential variety of locations, climates, feedstocks, storage methods, processing alternatives, etc., which will occur at a national scale. When setting up biomass fuel supply chains, for large-scale biomass systems, logistics are a pivotal part in the system. Various studies have shown that long-distance international transport by ship is feasible in terms of energy use and transportation costs, but availability of suitable vessels and meteorological conditions (e.g., winter time in Scandinavia and Russia) need to be considered. However, local transportation by truck (both in biomass exporting and importing countries) may be a high-cost factor, which can influence the overall energy balance and total biomass costs.

  8. Vehicle Technologies Office Merit Review 2014: International Energy Agency (IEA IA-AMT) International Characterization Methods (Agreement ID:26462)

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about International...

  9. A comparative study of the SSC resistance of a novel welding process IEA with SAW and MIG

    SciTech Connect (OSTI)

    Natividad, C. . E-mail: consnatividad@yahoo.com.mx; Salazar, M. . E-mail: salazarm@imp.mx; Espinosa-Medina, M.A.; Perez, R.

    2007-08-15

    The Stress Sulphide Cracking resistance of X65 weldments produced by Indirect Electric Arc, Submerged Arc Welding (SAW) and Metal Inert Gas (MIG) processes were evaluated in a NACE solution saturated with H{sub 2}S at 25 deg. C, 37 deg. C and 50 deg. C using Slow Strain Rate Tests (SSRT) and electrochemical measurements. Weldments produced by the Indirect Electric Arc presented the best Stress Sulphide Cracking resistance at 25 deg. C. This behavior is attributed to the microstructural modification of the weld bead from ferrite in a needlelike form to a fine grain microstructure, which was not observed at 37 deg. C and 50 deg. C. In addition, the hydrogen permeation flux increased with the temperature, this result is associated with the ferrite phase. The electrochemical results show a decrease of the trapping sites for the atomic hydrogen on this weldment. This behavior has not been observed for the other welding processes due to their microstructure (a typical columnar growth of coarse grain)

  10. Offshore Code Comparison Collaboration within IEA Wind Task 23: Phase IV Results Regarding Floating Wind Turbine Modeling; Preprint

    SciTech Connect (OSTI)

    Jonkman, J.; Larsen, T.; Hansen, A.; Nygaard, T.; Maus, K.; Karimirad, M.; Gao, Z.; Moan, T.; Fylling, I.

    2010-04-01

    Offshore wind turbines are designed and analyzed using comprehensive simulation codes that account for the coupled dynamics of the wind inflow, aerodynamics, elasticity, and controls of the turbine, along with the incident waves, sea current, hydrodynamics, and foundation dynamics of the support structure. This paper describes the latest findings of the code-to-code verification activities of the Offshore Code Comparison Collaboration, which operates under Subtask 2 of the International Energy Agency Wind Task 23. In the latest phase of the project, participants used an assortment of codes to model the coupled dynamic response of a 5-MW wind turbine installed on a floating spar buoy in 320 m of water. Code predictions were compared from load-case simulations selected to test different model features. The comparisons have resulted in a greater understanding of offshore floating wind turbine dynamics and modeling techniques, and better knowledge of the validity of various approximations. The lessons learned from this exercise have improved the participants' codes, thus improving the standard of offshore wind turbine modeling.

  11. IEA BESTEST In-Depth Diagnostic Cases for Ground Coupled Heat Transfer Related to Slab-on-Grade Construction: Preprint

    SciTech Connect (OSTI)

    Neymark, J.; Judkoff, R.; Beausoleil-Morrison, I.; Ben-Nakhi, A.; Crowley, M.; Deru, M.; Henninger, R.; Ribberink, H.; Thornton, J.; Wijsman, A.; Witte, M.

    2009-06-01

    A set of validation test cases is presented to compare the results of midlevel detailed ground-coupled heat transfer models typically used with whole-building energy simulation software.

  12. Impacts of Large Amounts of Wind Power on Design and Operation of Power Systems; Results of IEA Collaboration

    SciTech Connect (OSTI)

    Ela, E.; Parsons, B.; Holttinen, H.; Meibom, P.; Orths, A.; O'Malley, M.; Ummels, B. C.; Tande, J. O.; Estanqueiro, A.; Gomez, E.; Smith, J. C.

    2008-06-01

    This paper summarizes the results from 18 case studies, with discussion on differences in methodology as well as issues that have been identified to impact the cost of wind integration.

  13. Air Source Heat Pumps for Cold Climate Applications: Recent U. S. R&D Results from IEA HPP Annex 41

    SciTech Connect (OSTI)

    Baxter, Van D; Groll, Dr. Eckhard A.; Shen, Bo

    2014-01-01

    Air source heat pumps are easily applied to buildings almost anywhere. They are widespread in milder climate regions but their use in cold regions is hampered due to low efficiency and heating capacity at cold outdoor temperatures. This article describes selected R&D activities aimed at improving their cold weather performance.

  14. IEA Wind Task 34 (WREN) Quarterly Webinar #2: Marine Mammal and Avian Behavior at Offshore Wind Farms

    Office of Energy Efficiency and Renewable Energy (EERE)

    Please join us for the second in our quarterly webinar series to be held on Tuesday, December 9 from 4 to 5:30 pm UTC (8:00 am PT/11:00 am ET) developed as part of International Energy Agency’s...

  15. Changing Global Petroleum Product Trade Flows

    U.S. Energy Information Administration (EIA) Indexed Site

    OECD/IEA 2014 © OECD/IEA 2014 Antoine Halff 2014 EIA Energy Conference Changing Global Petroleum Product Trade Flows Washington, DC July 14, 2014 © OECD/IEA 2014 Crude trade shifts further east  Asia imports increase by 2.6 mb/d to 22.1 mb, or 65% of the international crude market Crude Exports in 2019 and Growth in 2013-19 for Key Trade Routes 1 (million barrels per day) 0.2 0.3 (0) 2.0 (0.2) (-0.6) 4.1 (-0.6) 0.1 (-0.7) 3.1 1.2 (0.3) 1.0 (+0.1) -0.6 2.2 1.8 (+0.8) (-0.6) 1.1 (+0.3) Red

  16. Organisation for Economic Co-Operation and Development (OECD...

    Open Energy Info (EERE)

    OECD-Private Sector Engagement in Adaptation to Climate Change Visualization of World Energy Supply Add Tool OECD Programs Ethiopia-National Greenhouse Gas Emissions...

  17. NREL: Distributed Grid Integration - Solar Distributed Grid Integratio...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (IEA PVPS) Task 11 - PV hybrid and mini-grids Support IEA PVPS Task 14 - high ... Utility District, Anatolia Project Southern California Edison Hawaii Smart Grid projects. ...

  18. Property:UNRegion | Open Energy Information

    Open Energy Info (EERE)

    Solid Waste Management Guidelines for Conversion of Diesel Buses to Compressed Natural Gas H How Communities Manage Forests I IEA Energy Statistics IEA Implementing Agreements...

  19. Technology Roadmap: Biofuels for Transport | Open Energy Information

    Open Energy Info (EERE)

    TOOL Name: Technology Roadmap: Biofuels for Transport AgencyCompany Organization: IEA ComplexityEase of Use: Not Available Website: www.iea.orgpublications...

  20. ENERGY SUPPLY SECURITY 2014

    Broader source: Energy.gov (indexed) [DOE]

    Sustainable Together ENERGY SUPPLY SECURITY 2014 Emergency Response of IEA Countries Secure Sustainable Together ENERGY SUPPLY SECURITY 2014 Emergency Response of IEA Countries ...

  1. Energy Security and Sustainable Development in Asia and the Pacific...

    Open Energy Info (EERE)

    Statistics Division, UNDP, APERC, BP and IEA. For demand forecasts, it uses IEA methodology, albeit modified for Asia-Pacific conditions. The study uses the international...

  2. PowerPoint Presentation

    U.S. Energy Information Administration (EIA) Indexed Site

    20 W 118 th St, New York, NY 10027 | http://energypolicy.columbia.edu | @ColumbiaUEnergy Pacific Rim Impacts of US Shale Boom Jason Bordoff 2013 EIA Energy Conference June 17, 2013 1 420 W 118 th St, New York, NY 10027 | http://energypolicy.columbia.edu | @ColumbiaUEnergy Global Gas Demand Forecast Bcf/d Source: IEA WEO2012 0 100 200 300 400 500 600 2010 2015 2020 2025 2030 2035 Non-OECD Asia OECD Asia Africa Middle East Non-OECD Europe/Eurasia Europe Non-OECD Americas OECD Americas 2 420 W 118

  3. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    20 W 118 th St, New York, NY 10027 | http://energypolicy.columbia.edu | @ColumbiaUEnergy Pacific Rim Impacts of US Shale Boom Jason Bordoff 2013 EIA Energy Conference June 17, 2013 1 420 W 118 th St, New York, NY 10027 | http://energypolicy.columbia.edu | @ColumbiaUEnergy Global Gas Demand Forecast Bcf/d Source: IEA WEO2012 0 100 200 300 400 500 600 2010 2015 2020 2025 2030 2035 Non-OECD Asia OECD Asia Africa Middle East Non-OECD Europe/Eurasia Europe Non-OECD Americas OECD Americas 2 420 W 118

  4. OECD-Fostering Innovation for Green Growth | Open Energy Information

    Open Energy Info (EERE)

    Fostering Innovation for Green Growth Jump to: navigation, search Tool Summary LAUNCH TOOL Name: OECD-Fostering Innovation for Green Growth AgencyCompany Organization:...

  5. Organisation for Economic Co-Operation and Development (OECD...

    Open Energy Info (EERE)

    New Zealand, Norway, Poland, Portugal, Slovakia, Spain, Sweden, Switzerland, Turkey, United Kingdom and United States Mission OECD brings together the governments of...

  6. OECD-Private Sector Engagement in Adaptation to Climate Change...

    Open Energy Info (EERE)

    Private Sector Engagement in Adaptation to Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: OECD-Private Sector Engagement in Adaptation to Climate Change...

  7. International Energy Agency Building Energy Simulation Test and Diagnostic Method (IEA BESTEST) Multi-Zone Non-Airflow In-Depth Diagnostic Cases: MZ320 -- MZ360

    SciTech Connect (OSTI)

    Neymark, J.; Judkoff, R.; Alexander, D.; Felsmann, C.; Strachan, P.; Wijsman, A.

    2008-09-01

    This report documents a set of diagnostic test cases for multi-zone heat transfer models. The methodology combines empirical validation, analytical verification, and comparative analysis techniques.

  8. International Energy Agency (IEA) Task 40 — Sustainable International Energy Trade: Securing Supply and Demand -- Country Report 2010 for the United States

    SciTech Connect (OSTI)

    J. Richard Hess; Jacob J. Jacobson; Richard Nelson; Carl Wolf

    2011-12-01

    This report updates the status of U.S. biomass resources currently and future potentials for domestic and export markets of residues, energy crops, and woody resources. Includes energy and fuel production and consumption statistics, driving policies, targets, and government investment in bioenergy industry development.

  9. International Energy Agency (IEA) Task 40 — Sustainable International Energy Trade: Securing Supply and Demand -- Country Report 2009 for the United States

    SciTech Connect (OSTI)

    J. Richard Hess; Jacob J. Jacobson; Richard Nelson; Carl Wolf

    2009-06-01

    This report outlines the status of U.S. biomass resources currently and future potentials for domestic and export markets of residues, energy crops, and woody resources. Includes energy and fuel production and consumption statistics, driving policies, targets, and government investment in bioenergy industry development.

  10. What Did They Do in IEA 34/43? Or How to Diagnose and Repair Bugs in 500,000 Lines of Code: Preprint

    SciTech Connect (OSTI)

    Judkoff, R.; Neymark, J.

    2009-06-01

    This paper presents an overview of the International Energy Agency Solar Heating and Cooling Task 34 and Energy Conservation in Buildings and Community Systems Annex 43.

  11. Renewable Electricity Grid Integration Roadmap for Mexico. Supplement to the IEA Expert Group Report on Recommended Practices for Wind Integration Studies

    SciTech Connect (OSTI)

    Parsons, Brian; Cochran, Jaquelin; Watson, Andrea; Katz, Jessica; Bracho, Ricardo

    2015-08-19

    As a recognized leader in efforts to mitigate global climate change, the Government of Mexico (GOM) works proactively to reduce emissions, demonstrating strong political will and capacity to comprehensively address climate change. Since 2010, the U.S. government (USG) has supported these efforts by partnering with Mexico under the Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program. Through the program, the USG has partnered with Mexico’s Ministry of Energy (SENER), as well as other government agencies, to support GOM in reaching its clean energy and climate change goals. Specifically, the EC-LEDS program is supporting GOM’s clean energy goal of generating 35% of its electricity from renewable energy (RE) by 2024. EC-LEDS, through the U.S. Agency for International Development (USAID) and the U.S Department of Energy’s (DOE’s) National Renewable Energy Laboratory (NREL), has been collaborating with SENER and GOM interagency working group—the Consejo Consultivo para las Energías Renovables (Consultative Council on Renewable Energy)—to create a grid integration roadmap for variable RE. 1 A key objective in creating a grid integration roadmap is assessing likely impacts of wind and solar energy on the power system and modifying planning and operations accordingly. This paper applies best practices in conducting a grid integration study to the Mexican context.

  12. Energy use and carbon emissions: Non-OECD countries

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    This report surveys world energy use and carbon emissions patterns, with particular emphasis on the non-OECD countries. The non OECD is important not only because it currently makes up 84% of world population, but because its energy consumption, carbon emissions, population, and grow domestic product have all been growing faster than OECD`s. This presentation has seven major sections: (1) overview of key trends in non-OECD energy use and carbon emissions since 1970; (2) Comparison and contrasting energy use and carbon emissions for five major non OEDC regions (former Soviet Union and eastern Europe, Pacific Rim including China, Latin America, other Asia; Africa; 3-7) presentation of aggregate and sectoral energy use and carbon emissions data for countries within each of the 5 regions.

  13. Forecasting Crude Oil Spot Price Using OECD Petroleum Inventory Levels

    Reports and Publications (EIA)

    2003-01-01

    This paper presents a short-term monthly forecasting model of West Texas Intermediate crude oil spot price using Organization for Economic Cooperation and Development (OECD) petroleum inventory levels.

  14. Energy Use and Carbon Emissions: Non-OECD Countries

    Reports and Publications (EIA)

    1994-01-01

    Presents world energy use and carbon emissions patterns, with particular emphasis on the non-OECD (Organization for Economic Cooperation and Development) countries (including the current and former centrally planned economies).

  15. OECD-A Green Growth Strategy for Food and Agriculture | Open...

    Open Energy Info (EERE)

    OECD-A Green Growth Strategy for Food and Agriculture Jump to: navigation, search Tool Summary LAUNCH TOOL Name: OECD-A Green Growth Strategy for Food and Agriculture Agency...

  16. CRAD, Preliminary Documented Safety Analysis - July 25, 2014...

    Broader source: Energy.gov (indexed) [DOE]

    4 Preliminary Documented Safety Analysis (IEA CRAD 31-2, REV. 0) This Criteria Review and Approach Document (IEA CRAD 31-2, REV. 0) provides objectives, criteria, and approaches...

  17. (International Energy Agency Heat Pump Center Working Team meeting)

    SciTech Connect (OSTI)

    Broders, M.A.

    1990-11-20

    The traveler, serving as Delegate from the United States Heat Pump Center National Team, participated in the activities of the second International Energy Agency Heat Pump Center (IEA-HPC) Working Team meeting. This included a 20 minute presentation by the traveler about the Development and Activities of the IEA Heat Pump Center US National Team.'' Highlights of this meeting included development of 1991 IEA-HPC work plans including a prioritization of activities, introduction of the newly appointed IEA-HPC Advisory Board, and discussion of a new IEA Clearinghouse Network initiative. Pre-meeting discussions were held with IEA-HPC staff members which focused on US Heat Pump Center National Team contributions to the IEA-HPC Newsletter and participation in other IEA-HPC sponsored activities.

  18. Offshore Code Comparison Collaboration Continuation (OC4), Phase I - Results of Coupled Simulations of an Offshore Wind Turbine with Jacket Support Structure: Preprint

    SciTech Connect (OSTI)

    Popko, W.; Vorpahl, F.; Zuga, A.; Kohlmeier, M.; Jonkman, J.; Robertson, A.; Larsen, T. J.; Yde, A.; Saetertro, K.; Okstad, K. M.; Nichols, J.; Nygaard, T. A.; Gao, Z.; Manolas, D.; Kim, K.; Yu, Q.; Shi, W.; Park, H.; Vasquez-Rojas, A.

    2012-03-01

    This paper presents the results of the IEA Wind Task 30, Offshore Code Comparison Collaboration Continuation Project - Phase 1.

  19. From Roadmaps to Implementation Workshop | Open Energy Information

    Open Energy Info (EERE)

    Implementation, Market analysis, Technology characterizations Resource Type: Workshop, Lessons learnedbest practices Website: www.iea.orgworkworkshopdetail.asp?WSID433...

  20. Energy Technology Roadmaps: A Guide to Development and Implementation...

    Open Energy Info (EERE)

    Topics: Low emission development planning, Pathways analysis Resource Type: Guidemanual, Lessons learnedbest practices Website: www.iea.orgpapersroadmapsguide.pdf Energy...

  1. OECD-A Green Growth Strategy for Energy | Open Energy Information

    Open Energy Info (EERE)

    A Green Growth Strategy for Energy Jump to: navigation, search Tool Summary LAUNCH TOOL Name: OECD-A Green Growth Strategy for Energy AgencyCompany Organization: Organisation for...

  2. Natural gas information 1996 (1997 edition)

    SciTech Connect (OSTI)

    1997-09-16

    A detailed reference work on gas supply and demand covering not only the OECD countries but also the rest of the world, this publication contains essential information on LNG and pipeline trade, gas reserves, storage capacity, and prices. The main part of the book concentrates on OECD countries, showing a detailed gas supply and demand balance for each country and for three OECD regions: North America, Europe, and Asia-Pacific, as well as a breakdown of gas consumption by end-user. Import and export data are reported by source and destination. Also included are maps of the pipeline systems in 25 IEA countries and information on their ownership and operations, transit of gas, regulatory features, and transportation tariffs.

  3. Microsoft PowerPoint - GuyCaruso oilmarketmar2010.ppt [Compatibility Mode]

    U.S. Energy Information Administration (EIA) Indexed Site

    Despite Excess Spare Capacity, Reduced Demand and Increased OPEC Production volumes, High , g Prices Persist.... 8 160 mmb/d US$/barrel 5 6 7 8 100 120 140 160 2 3 4 5 40 60 80 100 0 1 2 0 20 40 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 www.csis.org | 1 Source: IEA OMR September 2009, EIA Prices Surplus Capacity If the Fundamentals are so Bad, What's Driving Oil Prices to Increase? * Questionable Data ? What is really happening in non- OECD/China? Stocks and Line Fill? Cold Weather? *

  4. Sensitivity Analysis of OECD Benchmark Tests in BISON

    SciTech Connect (OSTI)

    Swiler, Laura Painton; Gamble, Kyle; Schmidt, Rodney C.; Williamson, Richard

    2015-09-01

    This report summarizes a NEAMS (Nuclear Energy Advanced Modeling and Simulation) project focused on sensitivity analysis of a fuels performance benchmark problem. The benchmark problem was defined by the Uncertainty Analysis in Modeling working group of the Nuclear Science Committee, part of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD ). The benchmark problem involv ed steady - state behavior of a fuel pin in a Pressurized Water Reactor (PWR). The problem was created in the BISON Fuels Performance code. Dakota was used to generate and analyze 300 samples of 17 input parameters defining core boundary conditions, manuf acturing tolerances , and fuel properties. There were 24 responses of interest, including fuel centerline temperatures at a variety of locations and burnup levels, fission gas released, axial elongation of the fuel pin, etc. Pearson and Spearman correlatio n coefficients and Sobol' variance - based indices were used to perform the sensitivity analysis. This report summarizes the process and presents results from this study.

  5. NREL: Wind Research - News Release Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    09 September 14, 2009 IEA Wind Energy 2008 Annual Report Now Available for Free Download The IEA Annual Report for 2008 provides the latest information on wind industries in 20 International Energy Agency (IEA) Wind member countries. August 26, 2009 NWTC Installs Multimegawatt Research Turbines NREL's National Wind Technology Center installed the first of two multimegawatt wind turbines last week to be used for research to advance wind turbine performance and reliability. February 3, 2009 U.S.

  6. Independent Oversight Activity Report, Hanford Waste Treatment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This activity consisted of IEA staff conducting an informational visit to WTP to review the Bechtel National, Incorporated response to Quality Assurance Program Effectiveness ...

  7. This Week In Petroleum Printer-Friendly Version

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    For example, the posted price for West Texas Intermediate (WTI) crude oil that the International Energy Agency (IEA) used in its calculations to show that the record...

  8. SPR Quick Facts and FAQs | Department of Energy

    Office of Environmental Management (EM)

    Inventory | Crude Oil Storage by Site | Current Days of Import Protection in the SPR | International Energy Agency (IEA) Requirement | Average Price Paid for Oil in the Reserve | ...

  9. This Week In Petroleum Printer-Friendly Version

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Energy Agency (IEA) released its latest monthly Oil Market Report (OMR). The big news was that inventory levels for the Organization for Economic Cooperation and...

  10. Empirical Validation Workshop: Need and Theory

    Broader source: Energy.gov (indexed) [DOE]

    Empirical Validation Workshop: Need and Theory, Jan 28-29, 2015 Model vs Measured Pre-normative work by Labs, IEA, ASHRAE etc. becomes... Normative ANSIASHRAE Standard 140 ...

  11. Developing the Next Generation of Gridded TMYs (Presentation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    o Outreach * Standards, expert committees, and collaborations o ASTM G03-radiometry o IEA Task 46 Solar Resource Assessment and Forecasting o Subcontracts and cooperative...

  12. Bibliography, Bioenergy Technologies Office Multi-Year Program...

    Broader source: Energy.gov (indexed) [DOE]

    M. (2013). "Status of Advanced Biofuels Demonstration Facilities in 2012: A Report to IEA Bioenergy Task 39," http:demoplants.bioenergy2020.eufilesDemoplantsReportFinal.pd...

  13. Hydrogen Safety Panel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    or otherwise restricted information. Project ID: scs07weiner PNNL-SA-65397 2 IEA HIA Task 19 Working Group Hydrogen Safety Training Props Hydrogen Safety Panel Incident...

  14. Energy Development Index (EDI) | Open Energy Information

    Open Energy Info (EERE)

    Index (EDI) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Development Index (EDI) AgencyCompany Organization: International Energy Agency (IEA) Sector:...

  15. "Title","Creator/Author","Publication Date","OSTI Identifier...

    Office of Scientific and Technical Information (OSTI)

    Report",,,,"United States Carbon Sequestration Council (United States)","IEA Clean Coal Centre, London (United Kingdom)","20 FOSSIL-FUELED POWER PLANTS; COAL GASIFICATION;...

  16. Bibliography, Bioenergy Technologies Office Multi-Year Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Enzymatic Hydrolysis for Corn Stover." National Renewable Energy Laboratory. ... to IEA Bioenergy Task 39." http:demoplants.bioenergy2020.eufilesDemoplantsReportFinal.pdf. ...

  17. Biofuels and food security

    Office of Scientific and Technical Information (OSTI)

    ... at http:www.theicct.orgsitesdefaultfilespublicationsICCTvegoilandEUbiofuelmandate2013 0211.pdf). IEA (International Energy Agency). 2010. Status of 2 nd generation ...

  18. Energa hidroelctrica | Open Energy Information

    Open Energy Info (EERE)

    Energa hidroelctrica Jump to: navigation, search Potencia generada con hidroelctrica en sur Amrica fuente IEA Potencia generada con energa hidroelctrica en centro...

  19. Renewable Electricity Grid Integration Roadmap for Mexico: Supplement...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FOR LOW EMISSION DEVELOPMENT STRATEGIES Renewable Electricity Grid Integration Roadmap for Mexico: Supplement to the IEA Expert Group Report on Recommended Practices for...

  20. International Energy Agency Bioenergy Conference 2015

    Broader source: Energy.gov [DOE]

    The 2015 International Energy Agency (IEA) Bioenergy Conference will be hosted in Berlin, Germany, from October 27 to 29, 2015. The conference will highlight recent research and market developments in bioenergy, such as challenges across bioenergy value chains, as well as crosscutting topics such as environmental sustainability, socioeconomic issues, and trade. The U.S. Department of Energy Bioenergy Technologies Office Demonstration and Market Transformation Program Manager Jim Spaeth will be moderating a panel on multidisciplinary projects within IEA Bioenergy. He will also be attending the IEA Executive Committee meeting on October 26, during which plans and commitments will be made for the IEA Bioenergy projects for the next triennium.

  1. Organizational Chart | Department of Energy

    Energy Savers [EERE]

    Chart Office presentation icon Organizational Chart More Documents & Publications IEA Organizational Chart Office of International Affairs Org Chart Chart of breakout of...

  2. Renewables in Global Energy Supply | Open Energy Information

    Open Energy Info (EERE)

    Sector: Energy Focus Area: Biomass, Geothermal, Solar, Wind, Hydrogen Website: www.iea.orgpapers2006renewablefactsheet.pdf Renewables in Global Energy Supply Screenshot...

  3. LBNL China Energy Group | Open Energy Information

    Open Energy Info (EERE)

    organizations, as well as with multilateral organizations working in China such as the IEA, World Bank, UN Development Program."1 "LBNL's China Energy Group can contribute to...

  4. Organizational Chart | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chart Organizational Chart Organizational Chart More Documents & Publications IEA Organizational Chart Office of International Affairs Org Chart Chart of breakout of funds by major...

  5. China-2050 Wind Technology Roadmap | Open Energy Information

    Open Energy Info (EERE)

    Pathways analysis, Technology characterizations Country China Eastern Asia References IEA Energy Technology Roadmaps1 This article is a stub. You can help OpenEI by expanding...

  6. Netherlands Antilles: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    country in North America. External Links Netherlands Antilles Renewable Energy Data from IEA Netherlands Antilles Contacts from Climate-Eval LowCarbonWorld Profile for Netherlands...

  7. Integrated MARKAL-EFOM System (TIMES) | Open Energy Information

    Open Energy Info (EERE)

    Program ComplexityEase of Use: Advanced Website: iea-etsap.orgwebTimes.asp Cost: Free Related Tools TEEMP Intertemporal Computable Equilibrium System (ICES) MCA4Climate -...

  8. Energy Technology Perspectives, 2010: Scenarios & Strategies...

    Open Energy Info (EERE)

    Carbon Capture and Storage Topics: Environmental Website: www.iea.orgTextbasenppdffree2010etp2010part1.pdf Equivalent URI: cleanenergysolutions.orgcontent...

  9. International Low-Carbon Energy Technology Platform | Open Energy...

    Open Energy Info (EERE)

    Topics: Low emission development planning, Policiesdeployment programs Resource Type: Lessons learnedbest practices Website: www.iea.orgplatform.asp International Low-Carbon...

  10. Gateway:Coordinated Low Emissions Assistance Network (CLEAN)...

    Open Energy Info (EERE)

    Center ClimateTechWiki ESMAP Low Carbon Development Knowledge Products and E-Learning IEA Policies and Measures Database GEF-Knowledge Management Initiative REN21...

  11. Category:CLEAN Partner | Open Energy Information

    Open Energy Info (EERE)

    Atomic Energy Agency (IAEA) International Energy Agency (IEA) International Institute for Sustainable Development (IISD) International Renewable Energy Agency (IRENA) J Joint...

  12. Democratic Republic of Congo: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    D Reegle Clean Energy Datasets The Democratic Republic of the Congo is a country in Africa. External Links Democratic Republic of Congo Renewable Energy Data from IEA...

  13. Burkina Faso: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    World Factbook, Appendix D Reegle Clean Energy Datasets Burkina Faso is a country in Africa. External Links Burkina Faso Renewable Energy Data from IEA Burkina Faso Contacts...

  14. Netherlands: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    and Wind Energy Resource Atlas for Netherlands. 3 Programs IEA Renewable Energy Technology Deployment ECN-NREL Collaboration Action Plan for Forest Law Enforcement Governance...

  15. Key World Energy Statistics-2010 | Open Energy Information

    Open Energy Info (EERE)

    World Energy Statistics-2010 AgencyCompany Organization: International Energy Agency Sector: Energy Topics: Market analysis Resource Type: Dataset, Maps Website: www.iea.org...

  16. Standardization of Transport Properties Measurements: Internal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standardization of Transport Properties Measurements: Internal Energy Agency (IEA-AMT) Annex on Thermoelectric International Round-Robin on Transport Properties of Bismuth ...

  17. Biomasa | Open Energy Information

    Open Energy Info (EERE)

    Biomasa Jump to: navigation, search Mapa Interactivo de Biocombustibles Potencia generada con Biomasa en sur America fuente IEA Potencia generada con Biomasa en centro America...

  18. Philip T. Pienkos | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Phycol. (2012) "Establishment of a bioenergy-focused microalgal culture collection," Algal ... Current Status and Potential for Algal Biofuels Production, IEA Bioenergy Task 39 Report ...

  19. Modeling and Simulation of Human Behavior in Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laboratory Modeling and Simulation of Human Behavior in Buildings 2015 Building ... to IEA EBC Annex 66 4 Complexity of Human Behavior * Inherent uncertainty * ...

  20. Oak Ridge National Laboratory's philosophy and approach to NEPA

    SciTech Connect (OSTI)

    Van Hook, R.I.; Braunstein, H.M.; Sigal, L.L.; Trettin, C.C.

    1991-01-01

    At Oak Ridge National Laboratory (ORNL), the overall responsibility for compliance with the National Environmental Policy Act (NEPA) resides with Environmental Review and Documentations Section that is within the Office of Environmental Compliance and Documentation (OECD). Organizationally, OECD is a line-management division reporting to the Director for Environmental, Safety and Health Compliance. The cornerstone for NEPA compliance at ORNL is the Internal Environmental Assessment (IEA), which is designed to provide a basis for NEPA review and documentation. The Standard Operating Procedures provide for evaluation and documentation records management and training, and auditing. The IEA provides a project description and a review of environmental, health and safety issues. The completed IEA is used to make recommendations to DOE regarding the appropriate level of NEPA documentation required for the action. NEPA documents which may be prepared include the Categorical Exclusion, Abbreviated Environmental Assessment, and Environmental Assessment; actions requiring Environmental Impact Statements are prepared by US Department of Energy (US DOE). The relatively recent DOE initiative for agency-wide compliance with NEPA has created areas in which ORNL has found itself lacking adequate resources and expertise. These are discussed in this paper. Throughout ORNL, there is strong management support for compliance with NEPA which has resulted in enhanced awareness and implementation of the NEPA requirements. Guidance is being provided and Laboratory divisions are factoring early integration of NEPA into their project planning with the goal of ensuring that their activities are carried out in full compliance with the letter and the spirit of NEPA and the other environmental statutes and regulations.

  1. OECD MCCI project final report, February 28, 2006.

    SciTech Connect (OSTI)

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    -dimensional. Although the MACE Scoping Test was carried out with a two-dimensional concrete cavity, the interaction was flooded soon after ablation was initiated to investigate debris coolability. Moreover, due to the scoping nature of this test, the apparatus was minimally instrumented and therefore the results are of limited value from the code validation viewpoint. Aside from the MACE program, the COTELS test series also investigated 2-D CCI under flooded cavity conditions. However, the input power density for these tests was quite high relative to the prototypic case. Finally, the BETA test series provided valuable data on 2-D core concrete interaction under dry cavity conditions, but these tests focused on investigating the interaction of the metallic (steel) phase with concrete. Due to these limitations, there is significant uncertainty in the partitioning of energy dissipated for the ablation of concrete in the lateral and axial directions under dry cavity conditions for the case of a core oxide melt. Accurate knowledge of this 'power split' is important in the evaluation of the consequences of an ex-vessel severe accident; e.g., lateral erosion can undermine containment structures, while axial erosion can penetrate the basemat, leading to ground contamination and/or possible containment bypass. As a result of this uncertainty, there are still substantial differences among computer codes in the prediction of 2-D cavity erosion behavior under both wet and dry cavity conditions. Thus, a second key aim of the current program was to provide the necessary data to help resolve these modeling differences. In light of the above issues, the OECD-sponsored Melt Coolability and Concrete Interaction (MCCI) program was initiated at Argonne National Laboratory. The project conducted reactor materials experiments and associated analysis to achieve the following technical objectives: (1) resolve the ex-vessel debris coolability issue through a program that focused on providing both confirmatory

  2. OECD/NEA study on the economics of the long-term operation of nuclear power plants

    SciTech Connect (OSTI)

    Lokhov, A.; Cameron, R.

    2012-07-01

    The OECD Nuclear Energy Agency (NEA) established the Ad hoc expert group on the Economics of Long-term Operation (LTO) of Nuclear Power Plants. The primary aim of this group is to collect and analyse technical and economic data on the upgrade and lifetime extension experience in OECD countries, and to assess the likely applications for future extensions. This paper describes the key elements of the methodology of economic assessment of LTO and initial findings for selected NEA member countries. (authors)

  3. INL Results for Phases I and III of the OECD/NEA MHTGR-350 Benchmark

    SciTech Connect (OSTI)

    Gerhard Strydom; Javier Ortensi; Sonat Sen; Hans Hammer

    2013-09-01

    The Idaho National Laboratory (INL) Very High Temperature Reactor (VHTR) Technology Development Office (TDO) Methods Core Simulation group led the construction of the Organization for Economic Cooperation and Development (OECD) Modular High Temperature Reactor (MHTGR) 350 MW benchmark for comparing and evaluating prismatic VHTR analysis codes. The benchmark is sponsored by the OECD's Nuclear Energy Agency (NEA), and the project will yield a set of reference steady-state, transient, and lattice depletion problems that can be used by the Department of Energy (DOE), the Nuclear Regulatory Commission (NRC), and vendors to assess their code suits. The Methods group is responsible for defining the benchmark specifications, leading the data collection and comparison activities, and chairing the annual technical workshops. This report summarizes the latest INL results for Phase I (steady state) and Phase III (lattice depletion) of the benchmark. The INSTANT, Pronghorn and RattleSnake codes were used for the standalone core neutronics modeling of Exercise 1, and the results obtained from these codes are compared in Section 4. Exercise 2 of Phase I requires the standalone steady-state thermal fluids modeling of the MHTGR-350 design, and the results for the systems code RELAP5-3D are discussed in Section 5. The coupled neutronics and thermal fluids steady-state solution for Exercise 3 are reported in Section 6, utilizing the newly developed Parallel and Highly Innovative Simulation for INL Code System (PHISICS)/RELAP5-3D code suit. Finally, the lattice depletion models and results obtained for Phase III are compared in Section 7. The MHTGR-350 benchmark proved to be a challenging simulation set of problems to model accurately, and even with the simplifications introduced in the benchmark specification this activity is an important step in the code-to-code verification of modern prismatic VHTR codes. A final OECD/NEA comparison report will compare the Phase I and III results

  4. Results from the OECD report on international projections of electricity generating costs

    SciTech Connect (OSTI)

    Paffenbarger, J.A.; Bertel, E.

    1998-07-01

    The International Energy Agency and Nuclear Energy Agency of the OECD have periodically undertaken a joint study on electricity generating costs in OECD Member countries and selected non-Member countries. This paper presents key results from the 1998 update of this study. Experts from 19 countries drawn from electric utility companies and government provided data on capital costs, operating and maintenance costs, and fuel costs from which levelized electricity generating costs (US cents/kWh) for baseload power plants were estimated in each country using a common set of economic assumptions. Light water nuclear power plants, pulverized coal plants, and natural gas-fired combined cycle gas turbines were the principal options evaluated. five and 10% discount rates, 40-year operating lifetime, and 75% annual load factor were the base assumptions, with sensitivity analyses on operating lifetime and load factor. Fuel costs and fuel escalation were provided individually by country, with a sensitivity case to evaluate costs assuming no real fuel price escalation over plant lifetimes. Of the three principal fuel/technology options, none is predominantly the cheapest option for all economic assumptions. However, fossil-fueled options are generally estimated to be the least expensive option. The study confirms that gas-fired combined cycles have improved their economic performance in most countries in recent years and are strong competitors to nuclear and coal-fired plants. Eleven out of the 18 countries with two or more options show gas-fired plants to be the cheapest option at 10% discount rate. Coal remains a strong competitor to gas when lower discount rates are used. Nuclear is the least expensive at both 5 and 10% discount rate in only two countries. Generally, with gas prices above 5 US$/GJ, nuclear plants constructed at overnight capital costs below 1 650 $/kWe have the potential to be competitive only at lower discount rates.

  5. Federal Trade Commission tenth report to the Congress and the President

    SciTech Connect (OSTI)

    Not Available

    1981-04-01

    This Tenth Report on the Voluntary Agreement has reviewed the major activities of the oil industry groups participating in IEA activities during the reporting period. The Report concludes that the safeguards built into the conduct of AST-3 minimized competitive risks. However, the report recommends that the extent of ISAG's planning role be clarified for future tests or during an emergency. In December 1980, the IEA adopted an inventory balancing plan to forstall price increases that could result from the oil supply disruption caused by the Iran/Iraq war. Oil companies were given clearance to provide the IEA with supply data and to engage in bilateral consultation with the Secretariat to assist the IEA to determine whether to activate its oil sharing system. However, Section 252 required that no antitrust immunity be given for any supply actions taken at the request of the IEA or the US Government to carry out the balancing plan. Although the companies submitted supply data, no bilateral consultation were conducted. In the past, industry consultation on the need to activate the sharing system has included the receipt and discussion of Secretariat forecasts based upon company-submitted supply data. The report notes the traditional antitrust concern regarding the dissemination and discussion of short term industry forecasts. In addition, the report reviews the results of our staff's inquiry into company use of IEA-forecast data. The inquiry found that while the forecasts had not been used for operational purposes, some companies circulated the forecasts widely and did not limit the use of the data to IEA- related purposes. The report recommends that access to forecast data be restricted to company personnel who need the information in connection with IEA activities and that the use of the data for non-IEA purposes be prohibited. The report also suggests that industry discussions of short-term market conditions be restricted.

  6. The OECD/NEA/NSC PBMR coupled neutronics/thermal hydraulics transient benchmark: The PBMR-400 core design

    SciTech Connect (OSTI)

    Reitsma, F.; Ivanov, K.; Downar, T.; De Haas, H.; Gougar, H. D.

    2006-07-01

    The Pebble Bed Modular Reactor (PBMR) is a High-Temperature Gas-cooled Reactor (HTGR) concept to be built in South Africa. As part of the verification and validation program the definition and execution of code-to-code benchmark exercises are important. The Nuclear Energy Agency (NEA) of the Organisation for Economic Cooperation and Development (OECD) has accepted, through the Nuclear Science Committee (NSC), the inclusion of the Pebble-Bed Modular Reactor (PBMR) coupled neutronics/thermal hydraulics transient benchmark problem in its program. The OECD benchmark defines steady-state and transients cases, including reactivity insertion transients. It makes use of a common set of cross sections (to eliminate uncertainties between different codes) and includes specific simplifications to the design to limit the need for participants to introduce approximations in their models. In this paper the detailed specification is explained, including the test cases to be calculated and the results required from participants. (authors)

  7. Case studies on recent fossil-fired plants

    SciTech Connect (OSTI)

    Henderson, C.

    2007-12-31

    The article summarises the findings of case studies on fossil-fired power plants carried out by the IEA Clean Coal Centre for the IEA at the request of world leaders at the Gleneagles G8 Summit in July 2005. The studies compared the cost, efficiency and emissions of eight recently constructed coal-fired plants using pulverized coal combustion with subcritical, supercritical or ultra-supercritical steam turbine cycles. Also included was a review of IGCC developments. A case study of a natural gas combined-cycle plant was included for comparison. The full report has been published by the IEA. 1 tab.

  8. RELAP5/MOD2 assessment, OECD-LOFT small break experiment LP-SB-03

    SciTech Connect (OSTI)

    Guntay, S. )

    1990-04-01

    An analysis of the experimental results and post-test calculations using RELAP5/MOD2 carried out for OECD-LOFT small break experiment LP-SB-3 are presented. Experiment LP-SB-3 was conducted on March 5, 1984 in Loss-of-Fluid Test (LOFT) facility located at the Idaho National Engineering Laboratory (INEL). The experiment simulated a small cold leg break, with concurrent loss of high pressure injection system, and cooldown and recovery by feed and bleed of the steam generator secondary side and accumulator injection, respectively. The analysis was under taken as a part of a program at EIR aimed at developing experience in using the latest generation of best estimate Loss of Coolant Accident (LOCA) analysis computer codes, and to improve understanding of Small Break LOCA transients and as well as a part of a program aimed at assessing the RELAP5/MOD2 code. The latest available version (Cycle 33 to 36.1) of the code was used. The particular test selected for the analysis included several phenomena potentially relevant to any PWR plant operation in Switzerland. This report documents a short post-test analysis of the experiment emphasizing the results of additional analysis performed during the course of this task. RELAP5/MOD2 input model and results of the post-test calculation are documented. Included in the report are the results of a sensitivity analysis which show the predicted thermal-hydraulic response to a different input model. 7 refs., 55 figs., 2 tabs.

  9. OECD/NEA Ongoing activities related to the nuclear fuel cycle

    SciTech Connect (OSTI)

    Cornet, S.M.; McCarthy, K.; Chauvin, N.

    2013-07-01

    As part of its role in encouraging international collaboration, the OECD Nuclear Energy Agency is coordinating a series of projects related to the Nuclear Fuel Cycle. The Nuclear Science Committee (NSC) Working Party on Scientific Issues of the Nuclear Fuel Cycle (WPFC) comprises five different expert groups covering all aspects of the fuel cycle from front to back-end. Activities related to fuels, materials, physics, separation chemistry, and fuel cycles scenarios are being undertaken. By publishing state-of-the-art reports and organizing workshops, the groups are able to disseminate recent research advancements to the international community. Current activities mainly focus on advanced nuclear systems, and experts are working on analyzing results and establishing challenges associated to the adoption of new materials and fuels. By comparing different codes, the Expert Group on Advanced Fuel Cycle Scenarios is aiming at gaining further understanding of the scientific issues and specific national needs associated with the implementation of advanced fuel cycles. At the back end of the fuel cycle, separation technologies (aqueous and pyrochemical processing) are being assessed. Current and future activities comprise studies on minor actinides separation and post Fukushima studies. Regular workshops are also organized to discuss recent developments on Partitioning and Transmutation. In addition, the Nuclear Development Committee (NDC) focuses on the analysis of the economics of nuclear power across the fuel cycle in the context of changes of electricity markets, social acceptance and technological advances and assesses the availability of the nuclear fuel and infrastructure required for the deployment of existing and future nuclear power. The Expert Group on the Economics of the Back End of the Nuclear Fuel Cycle (EBENFC), in particular, is looking at assessing economic and financial issues related to the long term management of spent nuclear fuel. (authors)

  10. Secretary Comments on the Selection of the Next Executive Director...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington, D.C. - The Governing Board of the International Energy Agency (IEA) today announced that their 28 members have selected Maria Van der Hoeven of the Netherlands, the ...

  11. Hydrogen Safety Knowledge Tools

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Data Partners Best Practices - LANL, SNL, NREL, NASA, Hydrogen Safety Panel, and IEA HIA Tasks 19 and 22 Incident Reporting - NASA and Hydrogen Safety Panel 3 Objectives H2...

  12. Microsoft PowerPoint - C-Mod_BPM_2010_21.ppt [Compatibility Mode...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    di Torino U. Tokyo U T U. Texas IFS U. Toronto Coordination: FFCC, USBPO, TTF, ITPA, IEA C-Mod International Collaborations* Selected Highlights (FY0910) and Plans (FY10-12) *...

  13. October 2013 News Blast

    Broader source: Energy.gov (indexed) [DOE]

    ... September 25-27, 2013; Mark Elless; Raleigh, North Carolina * IEA Bioenergy Exco, November 11-13, 2013; Paul Grabowski; Jeju, Korea Upcoming Industry Events * 2013 AIChE Annual ...

  14. Building Materials Property Table

    SciTech Connect (OSTI)

    2010-04-16

    This information sheet describes a table of some of the key technical properties of many of the most common building materials taken from ASHRAE Fundamentals - 2001, Moisture Control in Buildings, CMHC, NRC/IRC, IEA Annex 24, and manufacturer data.

  15. International Energy Agency

    SciTech Connect (OSTI)

    Claudy, D.E.

    1982-01-01

    The International Energy Agency (IEA) responded to the 1973-1974 oil embargo with an emergency allocation program outlined in the Agreement on an International Energy Program (IEP), viewed by the US as an executive agreement and by most participants as a treaty. The IEA's four standing groups on Relations with Producer and other Consumer Countries, on Long-Term Cooperation, on the Oil Market, and on Emergency Questions are organized to accommodate co041869flicting interests through voting rights and to allow constructive interaction among intergovernmental bodies. A description of the allocation system and industry's role in emergencies is followed by a summary of US legal requirements relating to these activities. Four appendices reproduce the IEP Agreement and diagram the IEA organizational structure, the IEA emergency allocation system, and the Emergency Management Organization. (DCK)

  16. Office of Heath, Safety and Security Now Two New Offices

    Broader source: Energy.gov [DOE]

    To serve you better, DOE has structured the former HSS into to new organizations: the Office Independent Enterprise Assessment (IEA); and Office of Environment, Health, Safety and Security (EHSS).

  17. Worldwide Trends in Energy Use and Efficiency: Key Insights from...

    Open Energy Info (EERE)

    Trends in Energy Use and Efficiency: Key Insights from International Energy Agency (IEA) Indicator Analysis in Support of the Group of Eight (G8) Plan of Action Jump to:...

  18. MARKet ALlocation (MARKAL) | Open Energy Information

    Open Energy Info (EERE)

    Interface: Desktop Application ComplexityEase of Use: Moderate Website: iea-etsap.orgwebMarkal.asp Cost: Paid OpenEI Keyword(s): EERE tool References: MARKAL website1...

  19. Bahattin Buyuksahin

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Saudi Arabia other OPEC Effective Spare Capacity (wS.A.) VenNig Iraq Libya OECDIEA 2010 Demand to Reach 91.0 mbd in 2012 3 Source: IEA Oil Market Report 89.5 mbd in ...

  20. Aruba: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Aruba is a country in the Caribbean. External Links Aruba Renewable Energy Data from IEA Aruba Contacts from Climate-Eval LowCarbonWorld Profile for Aruba Retrieved from...

  1. Monaco: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Datasets Monaco is a country in Europe. External Links Monaco Renewable Energy Data from IEA Monaco Contacts from Climate-Eval LowCarbonWorld Profile for Monaco Retrieved from...

  2. Annex IV Environmental Webinar: Effects of Energy Removal on Physical Systems

    Broader source: Energy.gov [DOE]

    Please mark your calendars for the next Annex IV Environmental webinar titled: Effects of Energy Removal on Physical Systems. Held under the auspices of the Annex IV initiative to the IEA Ocean...

  3. Coal Research FAQs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    According to IEA, removing CCS from the list of options ... and storage (CCS) with coal-fired power generation at commercial ... new fossil-fueled power plants by increasing overall ...

  4. Department of Energy Update on Strategic Petroleum Reserve Sale

    Office of Energy Efficiency and Renewable Energy (EERE)

    On June 23, 2011, the International Energy Agency (IEA) announced that its 28 member countries would release 60 million barrels of crude oil and refined products into the global market.

  5. Mali: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    CIA World Factbook, Appendix D Reegle Clean Energy Datasets Mali is a country in Africa. External Links Mali Renewable Energy Data from IEA Mali Contacts from Climate-Eval...

  6. Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007 - 2012; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Hand, Maureen

    2015-06-15

    This presentation provides a summary of IEA Wind Task 26 report on Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007-2012

  7. International Round-Robin on Transport Properties of Bismuth...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Round-Robin on Transport Properties of Bismuth Telluride International Round-Robin on Transport Properties of Bismuth Telluride IEA-AMT round-robin testing of n- and p-type bismuth ...

  8. U.S. Leads International Collaborative to Address Wind Energy Development/Wildlife Challenges

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) is leading a new International Energy Agency (IEA) Wind Task to address concerns about the environmental effects of wind energy technology.

  9. International Round-Robin on Transport Properties of Bismuth Telluride

    Broader source: Energy.gov [DOE]

    IEA-AMT round-robin testing of n- and p-type bismuth telluride transport properties showed significant measurement issues and highlighted need for standardization of measurements of thermoelectric material properties

  10. Secretary Moniz's Remarks at the Bipartisan Policy Center on...

    Office of Environmental Management (EM)

    ... is principally focused around natural gas, as opposed to oil, but it is a broader statement. ... have an effort on our side led by the IEA to do data integration for North America. ...

  11. TITRE

    Gasoline and Diesel Fuel Update (EIA)

    Source: IEA, Coal Information NUMEROUS COAL-FIRED POWER PLANTS UNDER CONSTRUCTION AND PLANNED ... Source: Global Coal Plant Tracker COAL DEMAND: A STRONG GROWTH IN THE NEAR TERM Leading ...

  12. Energy Systems Integration Events | Energy Systems Integration | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events View presentations from past seminars and workshops. September 2016 IEA Forum on Integrating Energy Efficiency and Renewable Energy September 8, 2016 Paris, France Contact: Dr. Martha Symko-Davies NREL Director of Partnerships for ESI Dr. Martha Symko-Davies will speak at the September 8 IEA Forum on Integrating Energy Efficiency and Renewable Energy on a panel called "Sectoral challenges and approaches." Grid Modernization Initiative Devices and Integrated Systems Workshops

  13. International Energy Agency Bioenergy Webinar: Mobilizing Sustainable Bioenergy Supply Chains

    Broader source: Energy.gov [DOE]

    International Energy Agency (IEA) Bioenergy program will be hosting a webinar on Feb. 25, 2016 to present the findings of their “Mobilize Sustainable Bioenergy Supply Chains” project. Over the last three years, researchers have collaborated to examine the prospects for large-scale mobilization of bioenergy resources across the globe. Members of Bioenergy Technologies Office staff support the research and activities and IEA Bioenergy. Email to register to attend the webinar.

  14. Energy Secretary Bodman Leads US Delegation to International Energy Agency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ministerial | Department of Energy Leads US Delegation to International Energy Agency Ministerial Energy Secretary Bodman Leads US Delegation to International Energy Agency Ministerial May 2, 2005 - 12:41pm Addthis PARIS, FRANCE -- Secretary of Energy Samuel W. Bodman this week is leading the U.S. Delegation to the Ministerial Meeting of the International Energy Agency (IEA), being held in Paris. Secretary Bodman will emphasize three principles at the IEA Ministerial -- that energy security

  15. International Partnership for Geothermal Technology - 2012 Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation | Department of Energy International Partnership for Geothermal Technology - 2012 Peer Review Presentation International Partnership for Geothermal Technology - 2012 Peer Review Presentation International Partnership for Geothermal Technology presentation by Jay Nathwani at the May 7, 2012 Peer Review Meeting gtp_2012peerreview_ipgt_iea-gia_nathwani.pdf (316.39 KB) More Documents & Publications IEA-GIA ExCo - National Geothermal Data System and Online Tools Development and

  16. Trainor_1973.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training Training The U.S. Department of Energy's (DOE) Office of Independent Assessments (IEA) provides expert evaluations of management performance in safety, security and other areas by seasoned experts who are independent of line management and will ensure that training reflects the most current Departmental policy on safety and security issues. IEA incorporates the lessons learned from inspections, reviews and assessments into safety and security training courses through its management of

  17. 2013 DOE Bioenergy Technologies Office (BETO) Project Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA Task 34 Fast Pyrolysis 6.3.2.25 May 21, 2013 Technology Area Review: Bio-oil Principal Investigator: Doug Elliott Organization: PNNL This presentation does not contain any proprietary, confidential, or otherwise restricted information 2 | Bioenergy Technologies Office eere.energy.gov Goal/Objective Statement * The ultimate objective of IEA Bioenergy Task 34 is to promote commercialization of economical biomass fast pyrolysis for the production of refinery feedstock and fuel oil with

  18. International markets for CCTs

    SciTech Connect (OSTI)

    Ferriter, J.P.

    1997-12-31

    The paper begins by describing the role of the International Energy Agency, the importance of coal, what the IEA is doing in the area of clean coal technology, and the role of the IEA Coal Industry Advisory Board. The paper then discusses which coal technologies will be chosen, what the problem areas are, and what can be done to accelerate the take-up of clean coal technologies.

  19. International HVAC&R R&D Collaboration | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International HVAC&R R&D Collaboration International HVAC&R R&D Collaboration Tony Bouza, chair of the International Organizing Committee for the 11th IEA Heat Pump Conference, delivers the welcoming address in Montreal. (2014) Tony Bouza, chair of the International Organizing Committee for the 11th IEA Heat Pump Conference, delivers the welcoming address in Montreal. (2014) Lead Performer: Oak Ridge National Laboratory - Oak Ridge, TN Partners: -- International Energy Agency -

  20. (OECD Expert Group meeting on reduction of capital costs of nuclear power plants, Paris, France, July 21--26, 1989): Foreign trip report

    SciTech Connect (OSTI)

    Hudson, C.R. II

    1989-08-09

    The OECD initiated a study of means to reduce the capital costs of nuclear power plants in the latter part of 1988. To accomplish the study, an Expert Group consisting of representatives of OECD member countries was formed. The initial meeting of the Expert Group was held in November 1988. A second meeting, documented in an ORNL trip report by this author, was held in May 1989. This meeting represents the third follow-on meeting with the primary goal of reviewing the draft report written by members of the Expert Group.

  1. Analysis of the OECD/NRC BWR Turbine Trip Benchmark by the Coupled-Code System ATHLET-QUABOX/CUBBOX

    SciTech Connect (OSTI)

    Langenbuch, S.; Schmidt, K.-D.; Velkov, K.

    2004-10-15

    The OECD/NRC boiling water reactor (BWR) turbine trip benchmark has been calculated by the coupled thermal-hydraulic neutronics system code ATHLET-QUABOX/CUBBOX developed by Gesellschaft fuer Anlagen- und Reaktorsicherheit. The results obtained for all three exercises and for the additional four hypothetical cases are presented. The physical phenomena determining the BWR pressure transient are studied and explained. The sensitivity of results to variations of the initial steady-state conditions and of parameters of the two-phase flow model is discussed. A comparison is also performed for exercise 2 between the reactor core model with 33 thermal-hydraulic channels (THCs) as specified and a reactor core model with 764 THCs using a 1:1 mapping scheme.

  2. OECD/MCCI 2-D Core Concrete Interaction (CCI) tests : final report February 28, 2006.

    SciTech Connect (OSTI)

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    reactor material database for dry cavity conditions is solely one-dimensional. Although the MACE Scoping Test was carried out with a two-dimensional concrete cavity, the interaction was flooded soon after ablation was initiated to investigate debris coolability. Moreover, due to the scoping nature of this test, the apparatus was minimally instrumented and therefore the results are of limited value from the code validation viewpoint. Aside from the MACE program, the COTELS test series also investigated 2-D CCI under flooded cavity conditions. However, the input power density for these tests was quite high relative to the prototypic case. Finally, the BETA test series provided valuable data on 2-D core concrete interaction under dry cavity conditions, but these tests focused on investigating the interaction of the metallic (steel) phase with concrete. Due to these limitations, there is significant uncertainty in the partition of energy dissipated for the ablation of concrete in the lateral and axial directions under dry cavity conditions for the case of a core oxide melt. Accurate knowledge of this 'power split' is important in the evaluation of the consequences of an ex-vessel severe accident; e.g., lateral erosion can undermine containment structures, while axial erosion can penetrate the basemat, leading to ground contamination and/or possible containment bypass. As a result of this uncertainty, there are still substantial differences among computer codes in the prediction of 2-D cavity erosion behavior under both wet and dry cavity conditions. In light of the above issues, the OECD-sponsored Melt Coolability and Concrete Interaction (MCCI) program was initiated at Argonne National Laboratory. The project conducted reactor materials experiments and associated analysis to achieve the following technical objectives: (1) resolve the ex-vessel debris coolability issue through a program that focused on providing both confirmatory evidence and test data for the coolability

  3. RELAP5-3D results for phase I (Exercise 2) of the OECD/NEA MHTGR-350 MW benchmark

    SciTech Connect (OSTI)

    Strydom, G.; Epiney, A. S.

    2012-07-01

    The coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been initiated at the Idaho National Laboratory (INL) to provide a fully coupled prismatic Very High Temperature Reactor (VHTR) system modeling capability as part of the NGNP methods development program. The PHISICS code consists of three modules: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. As part of the verification and validation activities, steady state results have been obtained for Exercise 2 of Phase I of the newly-defined OECD/NEA MHTGR-350 MW Benchmark. This exercise requires participants to calculate a steady-state solution for an End of Equilibrium Cycle 350 MW Modular High Temperature Reactor (MHTGR), using the provided geometry, material, and coolant bypass flow description. The paper provides an overview of the MHTGR Benchmark and presents typical steady state results (e.g. solid and gas temperatures, thermal conductivities) for Phase I Exercise 2. Preliminary results are also provided for the early test phase of Exercise 3 using a two-group cross-section library and the Relap5-3D model developed for Exercise 2. (authors)

  4. Summary of important results and SCDAP/RELAP5 analysis for OECD LOFT experiment LP-FP-2

    SciTech Connect (OSTI)

    Coryell, E.W.

    1994-04-01

    This report summarizes significant technical findings from the LP-FP-2 Experiment sponsored by the Organization of Economic Cooperation and Development (OECD). It was the second, and final, fission product experiment conducted in the Loss-of-Fluid Test (LOFT) facility at the Idaho National Engineering Laboratory. The overall technical objective of the test was to contribute to the understanding of fuel rod behavior, hydrogen generation, and fission product release, transport, and deposition during a V-sequence accident scenario that resulted in severe core damage. An 11 by 11 test bundle, comprised of 100 prepressurized fuel rods, 11 control rods, and 10 instrumented guide tubes, was surrounded by an insulating shroud and contained in a specially designed central fuel module, that was inserted into the LOFT reactor. The simulated transient was a V-sequence loss-of-coolant accident scenario featuring a pipe break in the low pressure injection system line attached to the hot leg of the LOFT broken loop piping. The transient was terminated by reflood of the reactor vessel when the outer wall shroud temperature reached 1517 K. With sustained fission power and heat from oxidation and metal-water reactions, elevated temperatures resulted in zircaloy melting, fuel liquefaction, material relocation, and the release of hydrogen, aerosols, and fission products. A description and evaluation of the major phenomena, based upon the response of on line instrumentation, analysis of fission product data, postirradiation examination of the fuel bundle, and calculations using the SCDAP/RELAP5 computer code, are presented.

  5. RELAP5-3D Results for Phase I (Exercise 2) of the OECD/NEA MHTGR-350 MW Benchmark

    SciTech Connect (OSTI)

    Gerhard Strydom

    2012-06-01

    The coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been initiated at the Idaho National Laboratory (INL) to provide a fully coupled prismatic Very High Temperature Reactor (VHTR) system modeling capability as part of the NGNP methods development program. The PHISICS code consists of three modules: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. As part of the verification and validation activities, steady state results have been obtained for Exercise 2 of Phase I of the newly-defined OECD/NEA MHTGR-350 MW Benchmark. This exercise requires participants to calculate a steady-state solution for an End of Equilibrium Cycle 350 MW Modular High Temperature Reactor (MHTGR), using the provided geometry, material, and coolant bypass flow description. The paper provides an overview of the MHTGR Benchmark and presents typical steady state results (e.g. solid and gas temperatures, thermal conductivities) for Phase I Exercise 2. Preliminary results are also provided for the early test phase of Exercise 3 using a two-group cross-section library and the Relap5-3D model developed for Exercise 2.

  6. Sixteen Years of International Co-operation. The OECD/NEA Co-operative Programme on Decommissioning

    SciTech Connect (OSTI)

    Menon, S.; Valencia, L.

    2002-02-25

    The Co-operative Programme on Decommissioning under the administration of the Radioactive Waste Management Committee of the OECD Nuclear Energy Agency (NEA) has recently completed sixteen years of operation. The Programme, which is essentially an information exchange programme between decommissioning projects, came into being in 1985. It has grown from an initial 10 decommissioning projects from 7 countries to 39 projects from 14 countries today. From purely information exchange to start with, the Programme has, in later years, been functioning as a voice for the collective expression of views of the implementers of nuclear decommissioning. During the first sixteen years of the operation of the Co-operative Programme, nuclear decommissioning has grown from local specialist activities within projects to a competitive commercial industry. By the dismantling and release from regulatory control of over a dozen diverse nuclear facilities, the Programme has been able to demonstrate in practice, that nuclear decommissioning can be performed safely both for the workers and the public, and that this can be done at reasonable costs in an environmentally friendly fashion. During the recent years, discussions and work within the Co-operative Programme, specially within some of the Task Groups, have had/are having effects and repercussions not just in the field of nuclear decommissioning, but can possibly affect activities and regulations in other industries. This paper describes how the Programme and its activities and procedures have evolved over the years and indicate the directions of developments in the organization and execution of decommissioning projects. Finally, it gives a brief overview of the achievements of the Cooperative Programme and visualizes future developments in the field of nuclear decommissioning.

  7. Advancing the hydrogen safety knowledge base

    SciTech Connect (OSTI)

    Weiner, S. C.

    2014-08-29

    The International Energy Agency's Hydrogen Implementing Agreement (IEA HIA) was established in 1977 to pursue collaborative hydrogen research and development and information exchange among its member countries. Information and knowledge dissemination is a key aspect of the work within IEA HIA tasks, and case studies, technical reports and presentations/publications often result from the collaborative efforts. The work conducted in hydrogen safety under Task 31 and its predecessor, Task 19, can positively impact the objectives of national programs even in cases for which a specific task report is not published. As a result, the interactions within Task 31 illustrate how technology information and knowledge exchange among participating hydrogen safety experts serve the objectives intended by the IEA HIA.

  8. Advancing the hydrogen safety knowledge base

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Weiner, S. C.

    2014-08-29

    The International Energy Agency's Hydrogen Implementing Agreement (IEA HIA) was established in 1977 to pursue collaborative hydrogen research and development and information exchange among its member countries. Information and knowledge dissemination is a key aspect of the work within IEA HIA tasks, and case studies, technical reports and presentations/publications often result from the collaborative efforts. The work conducted in hydrogen safety under Task 31 and its predecessor, Task 19, can positively impact the objectives of national programs even in cases for which a specific task report is not published. As a result, the interactions within Task 31 illustrate how technologymore » information and knowledge exchange among participating hydrogen safety experts serve the objectives intended by the IEA HIA.« less

  9. IG-0798.pdf

    Office of Environmental Management (EM)

    IEA Unveils Clean Energy Progress Report in London IEA Unveils Clean Energy Progress Report in London April 26, 2012 - 12:20pm Addthis Prime Minister David Cameron, Secretary of State Edward Davey, Energy Department Secretary Steven Chu and Minister of State Greg Barker at the third Clean Energy Ministerial event in London on 26 April 2012. | Photo courtesy of the <a href="http://www.decc.gov.uk/">Department of Energy and Climate Change</a>. Prime Minister David Cameron,

  10. How To Setup EA Landing Page As Default Home Page For Google Chrome |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Google Chrome How To Setup EA Landing Page As Default Home Page For Google Chrome STEP 1: In Chrome enter the URL http://energy.gov/iea. Once the EA site loads, go to the Customize and Control Google Chrome button in the far right of the top menu (the icon looks like a page with multiple horizontal lines on it). STEP 1: In Chrome enter the URL http://energy.gov/iea. Once the EA site loads, go to the Customize and Control Google Chrome button in the far right of the top

  11. How To Setup EA Landing Page As Default Home Page For Internet Explorer |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Internet Explorer How To Setup EA Landing Page As Default Home Page For Internet Explorer STEP 1: In Internet Explorer enter the URL http://energy.gov/iea/. Once the EA site loads, click on the Home (Alt + M) drop-down list (highlighted with the red arrow and box). STEP 1: In Internet Explorer enter the URL http://energy.gov/iea/. Once the EA site loads, click on the Home (Alt + M) drop-down list (highlighted with the red arrow and box). STEP 2: Choose “Add or

  12. How To | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy Google Chrome How To Setup EA Landing Page As Default Home Page For Google Chrome STEP 1: In Chrome enter the URL http://energy.gov/iea. Once the EA site loads, go to the Customize and Control Google Chrome button in the far right of the top menu (the icon looks like a page with multiple horizontal lines on it). STEP 1: In Chrome enter the URL http://energy.gov/iea. Once the EA site loads, go to the Customize and Control Google Chrome button in the far right of the top

  13. (Thermal energy storage technologies for heating and cooling applications)

    SciTech Connect (OSTI)

    Tomlinson, J.J.

    1990-12-19

    Recent results from selected TES research activities in Germany and Sweden under an associated IEA annex are discussed. In addition, several new technologies for heating and cooling of buildings and automobiles were reviewed and found to benefit similar efforts in the United states. Details of a meeting with Didier-Werke AG, a leading German ceramics manufacturer who will provide TES media necessary for the United States to complete field tests of an advanced high temperature latent heat storage material, are presented. Finally, an overview of the December 1990 IEA Executive Committee deliberations on TES is presented.

  14. ITP Distributed Energy: The International CHP/DHC Collaborative - Advancing Near-Term Low Carbon Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 1955 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005 IEA_USA_16pp_A4:IEA_USA_16pp_A4 21/7/08 16:16 Page 1 1 CHP/DHC Country Scorecard: United States The United States has a long history of using Combined Heat and Power (CHP), and 8% of US electricity generation is provided by 85 gigawatts (GWe) of installed CHP capacity at over 3 300 facilities. The large-scale district energy systems are located in many major cities, and 330 university campuses use district energy systems as a low-carbon,

  15. Comparison of the PHISICS/RELAP5-3D ring and block model results for phase I of the OECD/NEA MHTGR-350 benchmark

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Strydom, G.; Epiney, A. S.; Alfonsi, Andrea; Rabiti, Cristian

    2015-12-02

    The PHISICS code system has been under development at INL since 2010. It consists of several modules providing improved coupled core simulation capability: INSTANT (3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and modules performing criticality searches, fuel shuffling and generalized perturbation. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D was finalized in 2013, and as part of the verification and validation effort the first phase of the OECD/NEA MHTGR-350 Benchmark has now been completed. The theoretical basis and latest development status of the coupled PHISICS/RELAP5-3D tool are described in more detailmore » in a concurrent paper. This paper provides an overview of the OECD/NEA MHTGR-350 Benchmark and presents the results of Exercises 2 and 3 defined for Phase I. Exercise 2 required the modelling of a stand-alone thermal fluids solution at End of Equilibrium Cycle for the Modular High Temperature Reactor (MHTGR). The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 required a coupled neutronics and thermal fluids solution, and the PHISICS/RELAP5-3D code suite was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of results obtained with the traditional RELAP5-3D “ring” model approach against a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity that can be obtained by this “block” model is illustrated with comparison results on the temperature, power density and flux distributions. Furthermore, it is shown that the ring model leads to significantly lower fuel temperatures (up to 10%) when compared with the higher fidelity block model, and that the additional model development and run-time efforts are worth the gains obtained

  16. Comparison of the PHISICS/RELAP5-3D ring and block model results for phase I of the OECD/NEA MHTGR-350 benchmark

    SciTech Connect (OSTI)

    Strydom, G.; Epiney, A. S.; Alfonsi, Andrea; Rabiti, Cristian

    2015-12-02

    The PHISICS code system has been under development at INL since 2010. It consists of several modules providing improved coupled core simulation capability: INSTANT (3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and modules performing criticality searches, fuel shuffling and generalized perturbation. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D was finalized in 2013, and as part of the verification and validation effort the first phase of the OECD/NEA MHTGR-350 Benchmark has now been completed. The theoretical basis and latest development status of the coupled PHISICS/RELAP5-3D tool are described in more detail in a concurrent paper. This paper provides an overview of the OECD/NEA MHTGR-350 Benchmark and presents the results of Exercises 2 and 3 defined for Phase I. Exercise 2 required the modelling of a stand-alone thermal fluids solution at End of Equilibrium Cycle for the Modular High Temperature Reactor (MHTGR). The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 required a coupled neutronics and thermal fluids solution, and the PHISICS/RELAP5-3D code suite was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of results obtained with the traditional RELAP5-3D “ring” model approach against a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity that can be obtained by this “block” model is illustrated with comparison results on the temperature, power density and flux distributions. Furthermore, it is shown that the ring model leads to significantly lower fuel temperatures (up to 10%) when compared with the higher fidelity block model, and that the additional model development and run-time efforts are worth the gains obtained in the

  17. Summary of comparison and analysis of results from exercises 1 and 2 of the OECD PBMR coupled neutronics/thermal hydraulics transient benchmark

    SciTech Connect (OSTI)

    Mkhabela, P.; Han, J.; Tyobeka, B.; Ivanov, K.; Reitsma, F.; Sartori, E.

    2006-07-01

    The Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD) has accepted, through the Nuclear Science Committee (NSC), the inclusion of the Pebble-Bed Modular Reactor 400 MW design (PBMR-400) coupled neutronics/thermal hydraulics transient benchmark problem as part of their official activities. The scope of the benchmark is to establish a well-defined problem, based on a common given library of cross sections, to compare methods and tools in core simulation and thermal hydraulics analysis with a specific focus on transient events through a set of multi-dimensional computational test problems. The benchmark includes three steady state exercises and six transient exercises. This paper describes the first two steady state exercises, their objectives and the international participation in terms of organization, country and computer code utilized. This description is followed by a comparison and analysis of the participants' results submitted for these two exercises. The comparison of results from different codes allows for an assessment of the sensitivity of a result to the method employed and can thus help to focus the development efforts on the most critical areas. The two first exercises also allow for removing of user-related modeling errors and prepare core neutronics and thermal-hydraulics models of the different codes for the rest of the exercises in the benchmark. (authors)

  18. Test Procedures for Building Energy Simulation Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Test Procedures for Building Energy Simulation Tools Test Procedures for Building Energy Simulation Tools Lead Performer: -- National Renewable Energy Laboratory - Golden, CO -- J. Neymark & Associates - Golden, CO -- Lawrence Berkeley National Laboratory (LBNL) - Berkeley, CA Partners: -- ASHRAE Standing Special Projects Committee 140 -- Residential Energy Services Network (RESNET) -- International Energy Agency (IEA) - Paris, France -- Trane Inc. - Piscataway, NJ -- Carrier Corp. -

  19. Definition of the Floating System for Phase IV of OC3

    SciTech Connect (OSTI)

    Jonkman, J.

    2010-05-01

    Phase IV of the IEA Annex XXIII Offshore Code Comparison Collaboration (OC3) involves the modeling of an offshore floating wind turbine. This report documents the specifications of the floating system, which are needed by the OC3 participants for building aero-hydro-servo-elastic models.

  20. OC3 -- Benchmark Exercise of Aero-Elastic Offshore Wind Turbine Codes: Preprint

    SciTech Connect (OSTI)

    Passon, P.; Kuhn, M.; Butterfield, S.; Jonkman, J.; Camp, T.; Larsen, T. J.

    2007-08-01

    This paper introduces the work content and status of the first international investigation and verification of aero-elastic codes for offshore wind turbines as performed by the "Offshore Code Comparison Collaboration" (OC3) within the "IEA Wind Annex XXIII -- Subtask 2".

  1. International Energy Agency | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Agency International Energy Agency The International Energy Agency (IEA) provides a mechanism for member countries to task- and cost-share research activities through two agreements-one supporting hydrogen activities and another supporting fuel cell activities. The Hydrogen Implementing Agreement (HIA) focuses on facilitating, coordinating, and maintaining innovative research, development, and demonstration activities through international cooperation and information exchange. There are

  2. Testimony of Patricia A. Hoffman Assistant Secretary for Office of Electricity Delivery and Energy Reliability

    Office of Environmental Management (EM)

    Procedures for Building Energy Simulation Tools Test Procedures for Building Energy Simulation Tools Lead Performer: -- National Renewable Energy Laboratory - Golden, CO -- J. Neymark & Associates - Golden, CO -- Lawrence Berkeley National Laboratory (LBNL) - Berkeley, CA Partners: -- ASHRAE Standing Special Projects Committee 140 -- Residential Energy Services Network (RESNET) -- International Energy Agency (IEA) - Paris, France -- Trane Inc. - Piscataway, NJ -- Carrier Corp. - Alexandria,

  3. DOE Releases Updated Induced Seismicity Protocol

    Broader source: Energy.gov [DOE]

    At the 37th Stanford Geothermal Workshop in Stanford, California, the Geothermal Technologies Program at the U.S. Department of Energy (DOE) released an updated Induced Seismicity Protocol. This document supplements the existing International Energy Agency (IEA) protocol of 2009, and is intended to be a living document kept up-to-date with state-of-the-art knowledge and practices.

  4. EERE Multinational Partnerships and Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multinational Partnerships and Projects EERE Multinational Partnerships and Projects The Office of Energy Efficiency and Renewable Energy (EERE) plays a key role in a number of multinational energy relationships. Click on the links below to jump to the respective section. Clean Energy Ministerial International Partnership for Energy Efficiency Cooperation (IPEEC) International Renewable Energy Agency (IRENA) International Energy Agency (IEA) Working Groups and Implementing Agreements

  5. Hydrogen Industrial Trucks | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Trucks Hydrogen Industrial Trucks Slides from the U.S. Department of Energy Hydrogen Component and System Qualification Workshop held November 4, 2010 in Livermore, CA. csqw_harris.pdf (1.5 MB) More Documents & Publications Non-Metals Workshop Fuel Cell Technologies Program Overview: 2012 IEA HIA Hydrogen Safety Stakeholder Workshop US DRIVE Hydrogen Codes and Standards Technical Team Roadmap

  6. Comparison of the PHISICS/RELAP5-3D Ring and Block Model Results for Phase I of the OECD MHTGR-350 Benchmark

    SciTech Connect (OSTI)

    Gerhard Strydom

    2014-04-01

    The INL PHISICS code system consists of three modules providing improved core simulation capability: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been finalized, and as part of the code verification and validation program the exercises defined for Phase I of the OECD/NEA MHTGR 350 MW Benchmark were completed. This paper provides an overview of the MHTGR Benchmark, and presents selected results of the three steady state exercises 1-3 defined for Phase I. For Exercise 1, a stand-alone steady-state neutronics solution for an End of Equilibrium Cycle Modular High Temperature Reactor (MHTGR) was calculated with INSTANT, using the provided geometry, material descriptions, and detailed cross-section libraries. Exercise 2 required the modeling of a stand-alone thermal fluids solution. The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 combined the first two exercises in a coupled neutronics and thermal fluids solution, and the coupled code suite PHISICS/RELAP5-3D was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of the traditional RELAP5-3D “ring” model approach vs. a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity of the block model is illustrated with comparison results on the temperature, power density and flux distributions, and the typical under-predictions produced by the ring model approach are highlighted.

  7. Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

    SciTech Connect (OSTI)

    Bragg-Sitton, Shannon Michelle

    2015-09-01

    The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, parametric studies, and selection of system codes. The Cladding and Core Materials and Fuel Concepts task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment Task Force is chaired by Shannon Bragg-Sitton (INL), while the Cladding Task Force will be chaired by a representative from France (Marie Moatti, Electricite de France [EdF]) and the Fuels Task Force will be chaired by a representative from Japan (Masaki Kurata, Japan Atomic Energy Agency [JAEA]). This report provides an overview of the Systems Assessment Task Force charter and status of work accomplishment.

  8. New Multi-group Transport Neutronics (PHISICS) Capabilities for RELAP5-3D and its Application to Phase I of the OECD/NEA MHTGR-350 MW Benchmark

    SciTech Connect (OSTI)

    Gerhard Strydom; Cristian Rabiti; Andrea Alfonsi

    2012-10-01

    PHISICS is a neutronics code system currently under development at the Idaho National Laboratory (INL). Its goal is to provide state of the art simulation capability to reactor designers. The different modules for PHISICS currently under development are a nodal and semi-structured transport core solver (INSTANT), a depletion module (MRTAU) and a cross section interpolation (MIXER) module. The INSTANT module is the most developed of the mentioned above. Basic functionalities are ready to use, but the code is still in continuous development to extend its capabilities. This paper reports on the effort of coupling the nodal kinetics code package PHISICS (INSTANT/MRTAU/MIXER) to the thermal hydraulics system code RELAP5-3D, to enable full core and system modeling. This will enable the possibility to model coupled (thermal-hydraulics and neutronics) problems with more options for 3D neutron kinetics, compared to the existing diffusion theory neutron kinetics module in RELAP5-3D (NESTLE). In the second part of the paper, an overview of the OECD/NEA MHTGR-350 MW benchmark is given. This benchmark has been approved by the OECD, and is based on the General Atomics 350 MW Modular High Temperature Gas Reactor (MHTGR) design. The benchmark includes coupled neutronics thermal hydraulics exercises that require more capabilities than RELAP5-3D with NESTLE offers. Therefore, the MHTGR benchmark makes extensive use of the new PHISICS/RELAP5-3D coupling capabilities. The paper presents the preliminary results of the three steady state exercises specified in Phase I of the benchmark using PHISICS/RELAP5-3D.

  9. Webinar: Bioenergy –Is It Good for the Climate?

    Broader source: Energy.gov [DOE]

    As part of the International Energy Agency (IEA) Bioenergy Internal Webinar Series, the Energy Department’s Bioenergy Technologies Office (BETO) invites you to join a webinar on Thursday, April 21, 2016, at 10 a.m. Eastern Time. During the webinar, participants will learn about the climate benefits on bioenergy, and how it can achieve a net carbon reduction of CO2 levels in the atmosphere. The international webinar—Bioenergy–Is It Good for the Climate?—will be presented by Annett Cowie, who is the Principal Research Scientist –Climate. IEA is an organization that studies energy issues related to reliability, affordability, and sustainability. View the international toll free numbers to find your dial-in number (for United States and Canada, dial 1-888-289-4573).

  10. (Meeting on fusion reactor materials)

    SciTech Connect (OSTI)

    Jones, R.H. ); Klueh, R.L.; Rowcliffe, A.F.; Wiffen, F.W. ); Loomis, B.A. )

    1990-11-01

    During his visit to the KfK, Karlsruhe, F. W. Wiffen attended the IEA 12th Working Group Meeting on Fusion Reactor Materials. Plans were made for a low-activation materials workshop at Culham, UK, for April 1991, a data base workshop in Europe for June 1991, and a molecular dynamics workshop in the United States in 1991. At the 11th IEA Executive Committee on Fusion Materials, discussions centered on the recent FPAC and Colombo panel review in the United States and EC, respectively. The Committee also reviewed recent progress toward a neutron source in the United States (CWDD) and in Japan (ESNIT). A meeting with D. R. Harries (consultant to J. Darvas) yielded a useful overview of the EC technology program for fusion. Of particular interest to the US program is a strong effort on a conventional ferritic/martensitic steel for fist wall/blanket operation beyond NET/ITER.

  11. Slide 1

    U.S. Energy Information Administration (EIA) Indexed Site

    Session on International Energy Statistics EIA Conference 2013 Washington, DC June 17-18, 2013 Oslo Group on Energy Statistics 1 2 What is the Oslo Group (OG)?  A committee of international experts on energy statistics  Established by the United Nations Statistical Commission (UNSC) * First meeting took place in 2006  Membership: * 30+ countries * 5 international organizations (UNSD, IEA, Eurostat, IAEA, IMF) 3 What is the Mandate of the OG?  To promote and support the development,

  12. Technology Validation Fact Sheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Validation Fact Sheet Technology Validation Fact Sheet Fact sheet produced by the Fuel Cell Technologies Office describing hydrogen and fuel cell technology validation efforts (September 2013). Technology Validation (920.01 KB) More Documents & Publications Tri-Generation Success Story: World's First Tri-Gen Energy Station-Fountain Valley Fuel Cell Technologies Program Overview: 2012 DOE Polymer and Composite Materials Meetings Fuel Cell Technologies Program Overview: 2012 IEA HIA

  13. International Effort Advances Offshore Wind Turbine Design Codes |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy International Effort Advances Offshore Wind Turbine Design Codes International Effort Advances Offshore Wind Turbine Design Codes September 12, 2014 - 12:16pm Addthis For the past several years, the U.S. Department of Energy's National Renewable Energy Laboratory has teamed with the Fraunhofer Institute for Wind Energy and Energy System Technology (IWES) in Germany to lead an international effort under the International Energy Agency's (IEA) Task 30 to improve the tools

  14. Analysis and recommendations for DPA calculations in SiC

    SciTech Connect (OSTI)

    Heinisch, H.L.

    1998-09-01

    Recent modeling results, coupled with the implications of available experimental results, provide sufficient information to achieve consensus on the values of threshold displacement energies to use in displacements per atom (DPA) calculations. The values recommended here, 20 eV for C and 35 eV for Si, will be presented for adoption by the international fusion materials community at the next IEA SiC/SiC workshop.

  15. Fuel Cell Technologies Program Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA HIA Hydrogen Safety Stakeholder Workshop Bethesda, Maryland Fuel Cell Technologies Program Overview Dr. Sunita Satyapal U.S. Department of Energy Fuel Cell Technologies Program Program Manager 10/2/2012 2 | Fuel Cell Technologies Program eere.energy.gov Overview Fuel Cells - An Emerging Global Industry Clean Energy Patent Growth Index [1] shows that fuel cell patents lead in the clean energy field with over 950 fuel cell patents issued in 2011. * Nearly double the second place holder, solar,

  16. Secretary Comments on the Selection of the Next Executive Director of the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Energy Agency | Department of Energy Comments on the Selection of the Next Executive Director of the International Energy Agency Secretary Comments on the Selection of the Next Executive Director of the International Energy Agency March 11, 2011 - 12:00am Addthis Washington, D.C. - The Governing Board of the International Energy Agency (IEA) today announced that their 28 members have selected Maria Van der Hoeven of the Netherlands, the former Dutch Minister of the Economy, to

  17. Performance and risks of advanced pulverized-coal plants

    SciTech Connect (OSTI)

    Nalbandian, H.

    2009-07-01

    This article is based on an in-depth report of the same title published by the IEA Clean Coal Centre, CCC/135 (see Coal Abstracts entry Sep 2008 00535). It discusses the commercial, developmental and future status of pulverized fuel power plants including subcritical supercritical and ultra supercritical systems of pulverized coal combustion, the most widely used technology in coal-fired power generation. 1 fig., 1 tab.

  18. Exploration Best Practices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exploration Best Practices Exploration Best Practices The purpose of this project is to provide an overview of currentt geoth thermall explloratiti on bbestt practi tices andd a baseline values for exploration (both non-drilling and drilling) success rates in the U.S. analysis_young_exploration_best_practices.pdf (144.32 KB) More Documents & Publications IEA-GIA ExCo - National Geothermal Data System and Online Tools Tectonic & Structural Controls of Great Basin Geothermal Systems:

  19. Microsoft Word - Highlights.docx

    Gasoline and Diesel Fuel Update (EIA)

    July 2011 1 Independent Statistics & Analysis U.S. Energy Information Administration July 2011 Short-Term Energy Outlook July 12, 2011 Release Highlights  World crude oil prices initially fell following the June 23 announcement by the International Energy Agency (IEA) that its member countries would release up to 60 million barrels from strategic reserves but then rose above the pre- announcement levels in late June and early July. Attributing observed price changes since June 23 to the

  20. 70 MPa Fast-Fill Modeling and Validation Experiments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    70 MPa Fast-Fill Modeling and Validation Experiments 70 MPa Fast-Fill Modeling and Validation Experiments These slides were presented at the Onboard Storage Tank Workshop on April 29, 2010. mpafastfill_modelingexperiments_ostw.pdf (1.78 MB) More Documents & Publications Fuel Cell Technologies Program Overview: 2012 IEA HIA Hydrogen Safety Stakeholder Workshop Bonfire Tests of High Pressure Hydrogen Storage Tanks International Hydrogen Fuel and Pressure Vessel Forum 2010 Proceedings

  1. 2009 DOE Hydrogen Program Review Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9 DOE Hydrogen Program Review Presentation 2009 DOE Hydrogen Program Review Presentation 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. ed_12_rinebold.pdf (3.71 MB) More Documents & Publications Connecticut Fuel Cell Activities: Markets, Programs, and Models Fuel Cell Technologies Program Overview: 2012 IEA HIA Hydrogen Safety Stakeholder Workshop CESA-fuelcell-advancing-state-policies2010.pdf

  2. 2011 SPR Report to Congress | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SPR Report to Congress 2011 SPR Report to Congress Highlights from the report include: Drawdown 2011 - Libya Collective Action On June 23, 2011, President Obama authorized the sale and drawdown of 30 million barrels of crude oil from the Strategic Petroleum Reserve as the United States' share of a coordinated 60 million barrel release of oil from member countries of the IEA that had been announced the same day. The Strategic Petroleum Reserve conducted an online competitive sale that resulted in

  3. International Energy Agency

    Broader source: Energy.gov [DOE]

    DOE's market transformation efforts have reached to European and other countries who are part of the international distributed and decentralized energy community. Through its partnership with DOE, the combined heat and power (CHP) program of the International Energy Agency (IEA) conducts research and analysis of CHP markets and deployment efforts around the world and has used lessons learned from U.S. research, development, and deployment efforts to recommend market transformation activities and policies that will lead to new CHP installations worldwide.

  4. The Methane to Markets Coal Mine Methane Subcommittee meeting

    SciTech Connect (OSTI)

    2008-07-01

    The presentations (overheads/viewgraphs) include: a report from the Administrative Support Group; strategy updates from Australia, India, Italy, Mexico, Nigeria, Poland and the USA; coal mine methane update and IEA's strategy and activities; the power of VAM - technology application update; the emissions trading market; the voluntary emissions reduction market - creating profitable CMM projects in the USA; an Italian perspective towards a zero emission strategies; and the wrap-up and summary.

  5. Independent Oversight Review, Idaho Cleanup Project - August 2014 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cleanup Project - August 2014 Independent Oversight Review, Idaho Cleanup Project - August 2014 August 2014 The U.S. Department of Energy?s (DOE) Office of Environment, Safety and Health Assessments, within the DOE Office of Independent Enterprise Assessments (IEA) (formerly the Office of Health, Safety and Security), conducted an independent oversight review of the Integrated Waste Treatment facility contractor readiness assessment (C-RA) at the Idaho Site from January

  6. Int'l Smart Grid Action Network | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Int'l Smart Grid Action Network Int'l Smart Grid Action Network International Int'l Smart Grid Action Network (119.44 KB) More Documents & Publications Clean Energy Ministerial Press Fact Sheet IEA: Tracking Clean Energy Progress: Energy Technology Perspectives 2012 Joint Statement by Energy Ministers of G8, The People's Republic of China, India and The Republic of Korea (June 2008)

  7. International Partnership for Geothermal Technology - 2012 Peer Review Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Geothermal Technologies Program Glass Buttes, OR (DOE) May 7, 2012 GTP 2012 Peer Review International Partnership for Geothermal Technology (IPGT & IEA-GIA) Jay Nathwani Energy Efficiency & Renewable Energy eere.energy.gov Current International Collaborations The DOE is currently funding meaningful international collaborations through competitive funding solicitations and with national laboratories - examples are shown below Iceland Advanced 3D Geophysical Imaging Technologies for

  8. DOE Science Showcase - Wind Power | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information DOE Science Showcase - Wind Power Wind Powering America is a nationwide initiative of the U.S. Department of Energy's Wind Program designed to educate, engage, and enable critical stakeholders to make informed decisions about how wind energy contributes to the U.S. electricity supply. Wind Power Research Results in DOE Databases IEA Wind Task 26: The Past and Future Cost of Wind Energy, Work Package 2, Energy Citations Database NREL Triples Previous

  9. Environmental impacts of thermochemical biomass conversion. Final report

    SciTech Connect (OSTI)

    Elliott, D.C.; Hart, T.R.; Neuenschwander, G.G.; McKinney, M.D.; Norton, M.V.; Abrams, C.W.

    1995-06-01

    Thermochemical conversion in this study is limited to fast pyrolysis, upgrading of fast pyrolysis oils, and gasification. Environmental impacts of all types were considered within the project, but primary emphasis was on discharges to the land, air, and water during and after the conversion processes. The project discussed here is divided into five task areas: (1) pyrolysis oil analysis; (2) hydrotreating of pyrolysis oil; (3) gas treatment systems for effluent minimization; (4) strategic analysis of regulatory requirements; and (5) support of the IEA Environmental Systems Activity. The pyrolysis oil task was aimed at understanding the oil contaminants and potential means for their removal. The hydrotreating task was undertaken to better define one potential means for both improving the quality of the oil but also removing contaminants from the oil. Within Task 3, analyses were done to evaluate the results of gasification product treatment systems. Task 4 was a review and collection of regulatory requirements which would be applicable to the subject processes. The IEA support task included input to and participation in the IEA Bioenergy activity which directly relates to the project subject. Each of these tasks is described along with the results. Conclusions and recommendations from the overall project are given.

  10. The International Energy Agency's mandatory oil sharing agreement: Tests of efficiency, equity, and practicality: (Final report)

    SciTech Connect (OSTI)

    Horwich, G.; Jenkins-Smith, H.; Weimer, D.L.

    1986-01-01

    The International Energy Program Agreement, which created the International Energy Agency (IEA) in November 1974, establishes a system for the mandatory sharing of petroleum during severe oil supply disruptions. Development of the agreement was initiated by then Secretary of State Henry Kissinger during the attempted embargo of oil shipments to the US and The Netherlands by the Organization of Arab Petroleum Exporting Countries in 1973. Kissinger feared that the scramble for oil supplies would strain the Western alliance and contribute to a Western European ''tilt'' toward the Arab position in the Mideast. A new framework for international cooperation in the sharing of oil during oil embargoes and other supply disruptions seemed desirable; ensuring everyone their ''fair share'' would help blunt the oil weapon. Twenty-one countries, including the United States, Japan, and all the countries of Western Europe except France, affirmed this view through their membership in the IEA. The mechanism intended to achieve ''fair'' distribution of petroleum during severe disruptions is the Emergency Sharing System (ESS). Our evaluation of the ESS attempts to answer three questions: First, what would be the economic consequences for the US and other IEA members if sharing were to be implemented. Second, how do limitations in information and market control hinder implementation. Third, in light of such impediments, what are likely to be the actual economic consequences of attempted implementation.

  11. Climate change concerns drive projects to curb CO{sub 2}

    SciTech Connect (OSTI)

    Ellison, B.

    2007-06-15

    Carbon capture and storage (CCS) was discussed in two conference tracks at the Electric Power 2007 conference and workshop. The article reports on several presentations including three by Grant Grothen (Burns and McDonnell), Joe Bugica (EPRI), Robert M. Davidson (IEA Clean Coal Centre), Frank Alix (Powerspan), Bill Ellison (Power Engineering), Keith Morris (Doosan Babcock), Minish Shah (Praxair, Inc.) and Jerry Oliver (FutureGen Industrial Alliance). Each of the CO{sub 2} collection technologies discussed can be categorized as a post-, pre-, or oxy-combustion approach. 2 refs., 4 figs., 1 photos.

  12. The international fusion materials irradiation facility

    SciTech Connect (OSTI)

    Shannon, T.E.; Cozzani, F.; Crandall, D.H.; Wiffen, F.W.; Ehrlich, K.; Katsuta, H.; Kondo, T.; Teplyakov, V.; Zavialsky, L.

    1994-12-31

    It is widely agreed that the development of materials for fusion systems requires a high flux, 14 MeV neutron source. The European Union, Japan, Russia and the US have initiated the conceptual design of such a facility. This activity, under the International Energy Agency (IEA) Fusion Materials Agreement, will develop the design for an accelerator-based D-Li system. The first organizational meeting was held in June 1994. This paper describes the system to be studied and the approach to be followed to complete the conceptual design by early 1997.

  13. Supply and Disposition of Crude Oil and Petroleum Products

    Gasoline and Diesel Fuel Update (EIA)

    Global Demand Growth 2006/2007/2008 thousand barrels per day North America Latin America 188 251 203 Europe 37 124 -319 FSU 173 141 -178 Middle East Asia Africa Global Demand Growth (mb/d) 2006 1.02 1.2% 2007 0.92 1.1% 2008 1.72 2.0% -11 127 110 467 497 836 Source: IEA (3/11/2008) 35 1 303 405 -189 238 -95 2 Petroleum Demand Drivers ©Economic Growth s Social Trends - Population (growing but shifting) - Environmental consciousness - Globalization s World Financial Direction - Central banks

  14. Events | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events Calendar Events Calendar September 2016 < prev next > Sun Mon Tue Wed Thu Fri Sat 28 29 30 31 1 2 3 IEA Webinar: Cascading of woody biomass definitions, policies, and effects on international trade 10:00AM to 11:00AM EDT 4 5 6 7 8 9 10 Roadmap for Integrating Health and Home Performance (201) 1:00PM to 2:30PM EDT Working in Offshore Wind: Webinar and Panel Discussion 9:30AM to 11:30AM EDT 11 12 13 14 15 16 17 Fall Tech Trends: Promising New Products from DOE's High Impact

  15. Secretary of Energy Advisory Board FracFocus2.0 Task Force Public Meeting

    Broader source: Energy.gov (indexed) [DOE]

    Delivered | Department of Energy Thank you, Tanaka-san. We do indeed have a history together. In fact, his kind introduction was simply a repayment for my kind introduction of him at MIT a few years ago. I also want to thank Chairman Hanyu for his remarks, and for the hospitality of the Sasakawa Peace Foundation for hosting this event. I'll also go back with Mr. Tanaka and just note that it was a pleasure, certainly, working with him at the IEA and of course subsequently, and I just want to

  16. PowerPoint Presentation

    U.S. Energy Information Administration (EIA) Indexed Site

    OIL SUPPLY AND TECHNOLOGY 2016 EIA/DOE ENERGY CONFERENCE Michael C. Lynch lynch@energyseer.com THE BOOK IS FINALLY HERE! (WELL, END JULY) 2014 DOE PRICE FORECAST SURVEY 0 20 40 60 80 100 120 140 160 180 2010 2015 2020 2025 2030 2035 2040 ACTUAL DOE Series3 Series4 Series5 Series6 IEA SEER ...IN HISTORICAL CONTEXT $0 $20 $40 $60 $80 $100 $120 $140 $160 $180 1900 1910 1920 1930 1940 1950 1960 1970 1980 1990 2000 2010 2020 2030 2040 PRICE FORECASTING  SHORT-TERM ALL BUT IMPOSSIBLE  WEATHER,

  17. Role of Smart Grids in Integrating Renewable Energy

    SciTech Connect (OSTI)

    Speer, B.; Miller, M.; Schaffer, W.; Gueran, L.; Reuter, A.; Jang, B.; Widegren, K.

    2015-05-27

    This report was prepared for the International Smart Grid Action Network (ISGAN), which periodically publishes briefs and discussion papers on key topics of smart grid development globally. The topic of this report was selected by a multilateral group of national experts participating in ISGAN Annex 4, a working group that aims to produce synthesis insights for decision makers. This report is an update of a 2012 ISGAN Annex 4 report entitled “Smart Grid Contributions to Variable Renewable Resource Integration.” That report and other past publications of ISGAN Annexes can be found at www.iea-isgan.org and at www.cleanenergysolutions.org.

  18. Strategic Planning 2004 - 2008

    U.S. Energy Information Administration (EIA) Indexed Site

    Global Demand Growth 2006/2007/2008 thousand barrels per day North America Latin America 188 251 203 Europe 37 124 -319 FSU 173 141 -178 Middle East Asia Africa Global Demand Growth (mb/d) 2006 1.02 1.2% 2007 0.92 1.1% 2008 1.72 2.0% -11 127 110 467 497 836 Source: IEA (3/11/2008) 35 1 303 405 -189 238 -95 2 Petroleum Demand Drivers ©Economic Growth s Social Trends - Population (growing but shifting) - Environmental consciousness - Globalization s World Financial Direction - Central banks

  19. Human Behavior, Standards and Tools to Improve Design & Operation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Human Behavior, Standards and Tools to Improve Design & Operation 2014 Building Technologies Office Peer Review Tianzhen Hong, thong@lbl.gov Lawrence Berkeley National Laboratory Project Summary Timeline: Start date: 10/1/2012 planned, 1/1/2013 actual Planned end date: 9/30/2015 Key Milestones 1. Behavior data mining and models; 6/28/2013 2. Behavior framework; 12/20/2013 3. IEA EBC Annex 66 launched; 11/14/2013 Budget: Total DOE $ to date: $380K (FY13 + FY14) Total future DOE $: $220K, FY15

  20. The Half Life of {sup 193}Osbeta-decay

    SciTech Connect (OSTI)

    Zahn, Guilherme S.; Genezini, Frederico A.; Oliva, Jefferson W. M.; Zamboni, Cibele B.

    2010-05-21

    In this work, the half life of the beta{sup -} decay of {sup 193}Os was measured by following the activity of 25 5 mg {sup 192}Os-enriched samples for 20-60 h after they were irradiated in the IEA-R1 reactor of IPEN-CNEN/SP. Three different transitions associated with this beta decay were analyzed, and the results were then processed using three different statistical methods; the resulting values were compatible with the tabulated value, with an uncertainty of the same order of magnitude.

  1. International Round-Robin Study on Thermoelectric Transport Properties of n-type Half-Heusler from 300 K to 773 K

    SciTech Connect (OSTI)

    Wang, Hsin; Bai, Shengqiang; Chen, Lidong; Cuenat, Alexander; Joshi, Giri; Kleinke, Holger; Konig, Jan; Lee, Hee Woong; Martin, Joshua; Oh, Min-Wook; Porter, Wallace D.; Ren, Zhifeng; Salvador, James R.; Sharp, Jeff W.; Taylor, Patrick; Thompson, Alan J.; Tseng, Yu -Chih

    2015-09-03

    International transport property measurement round-robins have been conducted by the Thermoelectric Annex under the International Energy Agency (IEA) Implementing Agreement on Advanced Materials for Transportation (AMT). The previous round-robins used commercially available bismuth telluride as the testing material, with the goals of understanding measurement issues and developing standard testing procedures. The current round-robin extended the measurement temperature range to 773 K. It was designed to meet the increasing demands for reliable transport data of thermoelectric materials for power generation applications. Eleven laboratories from six IEA-AMT member countries participated in this study. Half-Heusler (n-type) material prepared by GMZ Energy was selected for the round-robin. The measured transport properties showed narrower distribution on uncertainties compared to previous round-robin efforts. The study intentionally included multiple testing methods and instrument types. Over the full temperature range, the measurement discrepancies on the figure of merit, ZT, in this round-robin were ±1.5 to ±16.4% from the averages.

  2. Workshop Proceedings on Financing the Development and Deployment of Renewable Energy Technologies

    SciTech Connect (OSTI)

    1995-05-16

    The Working Party on Renewable Energy (REWP) of the International Energy Agency (IEA) organized a two-day seminar on the role of financing organizations in the development and deployment of renewable energy (RE). The World Bank (WB) and the US Department of Energy (USDOE) hosted the workshop. Delegates were mainly senior government representatives from the 23 IEA member countries, whose responsibilities are related to all or most of the renewable sources of energy. In addition, representatives of the European Union, United Nations, trade organizations, utilities and industries and the WB attended the meeting. The workshop was recognized as an important first step in a dialog required between the parties involved in the development of RE technology, project preparation and the financing of RE. It was also recognized that much more is required--particularly in terms of increased collaboration and coordination, and innovative financing--for RE to enter the market at an accelerated pace, and that other parties (for example from the private sector and recipient countries) need to have increased involvement in future initiatives.

  3. International energy program and United States antitrust law

    SciTech Connect (OSTI)

    Carr, R.G.

    1983-01-01

    Congress granted participating US oil companies a limited antitrust defense, through Section 252 of the Energy Policy and Conservation Act of 1975, for certain actions taken in carrying out the International Energy Agency's (IEA) emergency oil allocation and information systems. These limits (1) apply only to actions taken in accordance with approved voluntary plans, (2) are not applicable if the purpose is to injure competition, and (3) apply only to voluntary plans or agreements concerning allocation and information provisions of the International Energy Program. These limitations are augmented by other antitrust safeguards incorporated in the Voluntary Agreement. Actions by oil companies outside antitrust defense do not necessarily violate the antitrust laws. A May 1981 revised draft of Plan of Action was issued by DOE. Comments raised are concerns for independent transactions and whether the limited antitrust defense should be extended to some reallocation activities independent of IEA requests. Risks (such as collusion) arising from participation in meetings with government and joint action by competitors are outlined. 15 references.

  4. International Round-Robin Study on Thermoelectric Transport Properties of n-type Half-Heusler from 300 K to 773 K

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Hsin; Bai, Shengqiang; Chen, Lidong; Cuenat, Alexander; Joshi, Giri; Kleinke, Holger; Konig, Jan; Lee, Hee Woong; Martin, Joshua; Oh, Min-Wook; et al

    2015-01-01

    International transport property measurement round-robins have been conducted by the Thermoelectric Annex under the International Energy Agency (IEA) Implementing Agreement on Advanced Materials for Transportation (AMT). The previous round-robins used commercially available bismuth telluride as the testing material, with the goals of understanding measurement issues and developing standard testing procedures. The current round-robin extended the measurement temperature range to 773 K. It was designed to meet the increasing demands for reliable transport data of thermoelectric materials for power generation applications. Eleven laboratories from six IEA-AMT member countries participated in this study. Half-Heusler (n-type) material prepared by GMZ Energy was selectedmore » for the round-robin. The measured transport properties showed narrower distribution on uncertainties compared to previous round-robin efforts. The study intentionally included multiple testing methods and instrument types. Over the full temperature range, the measurement discrepancies on the figure of merit, ZT, in this round-robin were ±1.5 to ±16.4% from the averages.« less

  5. International Round-Robin Study on Thermoelectric Transport Properties of n-type Half-Heusler from 300 K to 773 K

    SciTech Connect (OSTI)

    Wang, Hsin; Bai, Shengqiang; Chen, Lidong; Cuenat, Alexander; Joshi, Giri; Kleinke, Holger; Konig, Jan; Lee, Hee Woong; Martin, Joshua; Oh, Min-Wook; Porter, Wallace D.; Ren, Zhifeng; Salvador, James R.; Sharp, Jeff W.; Taylor, Patrick; Thompson, Alan J.; Tseng, Yu -Chih

    2015-01-01

    International transport property measurement round-robins have been conducted by the Thermoelectric Annex under the International Energy Agency (IEA) Implementing Agreement on Advanced Materials for Transportation (AMT). The previous round-robins used commercially available bismuth telluride as the testing material, with the goals of understanding measurement issues and developing standard testing procedures. The current round-robin extended the measurement temperature range to 773 K. It was designed to meet the increasing demands for reliable transport data of thermoelectric materials for power generation applications. Eleven laboratories from six IEA-AMT member countries participated in this study. Half-Heusler (n-type) material prepared by GMZ Energy was selected for the round-robin. The measured transport properties showed narrower distribution on uncertainties compared to previous round-robin efforts. The study intentionally included multiple testing methods and instrument types. Over the full temperature range, the measurement discrepancies on the figure of merit, ZT, in this round-robin were ±1.5 to ±16.4% from the averages.

  6. (Fusion materials R D programs of the International Thermonuclear Experimental Reactor)

    SciTech Connect (OSTI)

    Reuther, T.C.

    1990-10-12

    The objective of this travel was to advance provisional planning of an activity to coordinate research and development (R D) activities on fusion materials among the existing fusion materials R D programs of the ITER parties. This objective was accomplished in discussions with the Executive Committee for the IEA Implementing Agreement on Fusion Materials in Karlsruhe, Germany, and with the ITER management and staff of Garching, Germany. The IEA Executive Committee deferred substantive consideration of the topic at the insistence of the Ex-Officio member from European Community (EC), Brussels. Discussions with ITER management and staff were positive. It was noted the the draft ITER Long-Term Technology Research and Development Plan contains recommendations for major program effort in materials R D and includes recommendations for coordination among the existing programs of the parties to meet those materials R D needs. ITER management discussions were in the context that decisions on specific activities for the ITER engineering design activity (EDA) must await formal action by the parties on the ITER EDA.

  7. OECD Input-Output Tables | Open Energy Information

    Open Energy Info (EERE)

    714271111,00.html Country: Sweden, Finland, Japan, South Korea, Argentina, Australia, China, Israel, United Kingdom, Portugal, Romania, Greece, Poland, Slovakia, Chile, India,...

  8. OECD-International Platform on Policy Coherence for Development...

    Open Energy Info (EERE)

    Area: Economic Development Topics: Co-benefits assessment Resource Type: Guidemanual, Lessons learnedbest practices, Technical report User Interface: Website Website:...

  9. Impact of Installation Faults on Heat Pump Performance

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hourahan, Glenn; Baxter, Van D.

    2015-01-01

    Numerous studies and surveys indicate that typically-installed HVAC equipment operate inefficiently and waste considerable energy due to varied installation errors (faults) such as improper refrigerant charge, incorrect airflow, oversized equipment, and leaky ducts. This article summarizes the results of a large United States (U.S.) experimental/analytical study (U.S. contribution to IEA HPP Annex 36) of the impact that different faults have on the performance of an air-source heat pump (ASHP) in a typical U.S. single-family house. It combines building effects, equipment effects, and climate effects in an evaluation of the faults impact on seasonal energy consumption through simulations of the house/ASHPmore » pump system.« less

  10. Operating Reserves and Wind Power Integration: An International Comparison

    SciTech Connect (OSTI)

    Milligan, M.; Donohoo, P.; Lew, D.; Ela, E.; Kirby, B.; Holttinen, H.; Lannoye, E.; Flynn, D.; O'Malley, M.; Miller, N.; Ericksen, P. B.; Gottig, A.; Rawn, B.; Frunt, J.; Kling, W. L.; Gibescu, M.; Gomez-Lazaro, E.; Robitaille, A.; Kamwa, I.

    2010-01-01

    The determination of additional operating reserves in power systems with high wind penetration is attracting a significant amount of attention and research. Wind integration analysis over the past several years has shown that the level of operating reserve that is induced by wind is not a constant function of the installed capacity. Observations and analysis of actual wind plant operating data has shown that wind does not change its output fast enough to be considered as a contingency event. However, the variability that wind adds to the system does require the activation or deactivation of additional operating reserves. This paper provides a high-level international comparison of methods and key results from both operating practice and integration analysis, based on the work in International Energy Agency IEA WIND Task 25 on Large-scale Wind Integration. The paper concludes with an assessment of the common themes and important differences, along with recent emerging trends.

  11. Biomass Direct Liquefaction Options. TechnoEconomic and Life Cycle Assessment

    SciTech Connect (OSTI)

    Tews, Iva J.; Zhu, Yunhua; Drennan, Corinne; Elliott, Douglas C.; Snowden-Swan, Lesley J.; Onarheim, Kristin; Solantausta, Yrjo; Beckman, David

    2014-07-31

    The purpose of this work was to assess the competitiveness of two biomass to transportation fuel processing routes, which were under development in Finland, the U.S. and elsewhere. Concepts included fast pyrolysis (FP), and hydrothermal liquefaction (HTL), both followed by hydrodeoxygenation, and final product refining. This work was carried out as a collaboration between VTT (Finland), and PNNL (USA). The public funding agents for the work were Tekes in Finland and the Bioenergy Technologies Office of the U.S. Department of Energy. The effort was proposed as an update of the earlier comparative technoeconomic assessment performed by the IEA Bioenergy Direct Biomass Liquefaction Task in the 1980s. New developments in HTL and the upgrading of the HTL biocrude product triggered the interest in reinvestigating this comparison of these biomass liquefaction processes. In addition, developments in FP bio-oil upgrading had provided additional definition of this process option, which could provide an interesting comparison.

  12. Technical Potential of Solar Energy to Address Energy Poverty and Avoid GHG Emissions in Africa (Poster)

    SciTech Connect (OSTI)

    Cowlin, S.; Heimiller, D.; Bilello, D.; Renne, D.

    2008-10-01

    Approximately 1.6 billion people worldwide do not have access to electricity, and roughly 2.4 billion people rely on traditional biomass fuels to meet their heating and cooking needs. Lack of access to and use of energy - or energy poverty - has been recognized as a barrier to reaching the Millennium Development Goals (MDGs) and other targeted efforts to improve health and quality of life. Reducing reliance on traditional biomass can substantially reduce indoor air pollution-related morbidity and mortality; increasing access to lighting and refrigeration can improve educational and economic opportunities. Though targeted electrification efforts have had success within Latin America and East Asia (reaching electrification rates above 85%), sub-Saharan Africa has maintained electrification rates below 25% (IEA 2004).

  13. International Energy Agency Implementing Agreements and Annexes: A Guide for Building Technologies Program Managers

    SciTech Connect (OSTI)

    Evans, Meredydd; Runci, Paul; Meier, Alan

    2008-08-01

    This report presents results from a program evaluation of the U.S. Department of Energy?s Buildings Technologies Program (BTP) participation in collaborative international technology implementing agreements. The evaluation was conducted by researchers from the Pacific Northwest National Laboratory and the Lawrence Berkeley National Laboratory in the fall of 2007 and winter 2008 and was carried out via interviews with stakeholders in four implementing agreements in which BTP participates, reviews of relevant program reports, websites and other published materials. In addition to these findings, the report includes a variety of supporting materials such that aim to assist BTP managers who currently participate in IEA implementing agreements or who may be considering participation.

  14. Impact of Installation Faults on Heat Pump Performance

    SciTech Connect (OSTI)

    Hourahan, Glenn; Baxter, Van D.

    2015-01-01

    Numerous studies and surveys indicate that typically-installed HVAC equipment operate inefficiently and waste considerable energy due to varied installation errors (faults) such as improper refrigerant charge, incorrect airflow, oversized equipment, and leaky ducts. This article summarizes the results of a large United States (U.S.) experimental/analytical study (U.S. contribution to IEA HPP Annex 36) of the impact that different faults have on the performance of an air-source heat pump (ASHP) in a typical U.S. single-family house. It combines building effects, equipment effects, and climate effects in an evaluation of the faults impact on seasonal energy consumption through simulations of the house/ASHP pump system.

  15. Wellbore Integrity Network

    SciTech Connect (OSTI)

    Carey, James W.; Bachu, Stefan

    2012-06-21

    In this presentation, we review the current state of knowledge on wellbore integrity as developed in the IEA Greenhouse Gas Programme's Wellbore Integrity Network. Wells are one of the primary risks to the successful implementation of CO{sub 2} storage programs. Experimental studies show that wellbore materials react with CO{sub 2} (carbonation of cement and corrosion of steel) but the impact on zonal isolation is unclear. Field studies of wells in CO{sub 2}-bearing fields show that CO{sub 2} does migrate external to casing. However, rates and amounts of CO{sub 2} have not been quantified. At the decade time scale, wellbore integrity is driven by construction quality and geomechanical processes. Over longer time-scales (> 100 years), chemical processes (cement degradation and corrosion) become more important, but competing geomechanical processes may preserve wellbore integrity.

  16. 2007 Estimated International Energy Flows

    SciTech Connect (OSTI)

    Smith, C A; Belles, R D; Simon, A J

    2011-03-10

    An energy flow chart or 'atlas' for 136 countries has been constructed from data maintained by the International Energy Agency (IEA) and estimates of energy use patterns for the year 2007. Approximately 490 exajoules (460 quadrillion BTU) of primary energy are used in aggregate by these countries each year. While the basic structure of the energy system is consistent from country to country, patterns of resource use and consumption vary. Energy can be visualized as it flows from resources (i.e. coal, petroleum, natural gas) through transformations such as electricity generation to end uses (i.e. residential, commercial, industrial, transportation). These flow patterns are visualized in this atlas of 136 country-level energy flow charts.

  17. Modelling Residential-Scale Combustion-Based Cogeneration in Building Simulation

    SciTech Connect (OSTI)

    Ferguson, A.; Kelly, N.; Weber, A.; Griffith, B.

    2009-03-01

    This article describes the development, calibration and validation of a combustion-cogeneration model for whole-building simulation. As part of IEA Annex 42, we proposed a parametric model for studying residentialscale cogeneration systems based on both Stirling and internal combustion engines. The model can predict the fuel use, thermal output and electrical generation of a cogeneration device in response to changing loads, coolant temperatures and flow rates, and control strategies. The model is now implemented in the publicly-available EnergyPlus, ESP-r and TRNSYS building simulation programs. We vetted all three implementations using a comprehensive comparative testing suite, and validated the model's theoretical basis through comparison to measured data. The results demonstrate acceptable-to-excellent agreement, and suggest the model can be used with confidence when studying the energy performance of cogeneration equipment in non-condensing operation.

  18. Assessment of the Technical Potential for Micro-Cogeneration in Small Commerical Buildings across the United States: Preprint

    SciTech Connect (OSTI)

    Griffith, B.

    2008-05-01

    This paper presents an assessment of the technical potential for micro-cogeneration in small commercial buildings throughout the United States. The cogeneration devices are simulated with the computer program EnergyPlus using models developed by Annex 42, a working group of the International Energy Agency's Energy Efficiency in Buildings and Community Systems (IEA/ECBCS). Although the Annex 42 models were developed for residential applications, this study applies them to small commercial buildings, assumed to have a total floor area of 500 m2 or less. The potential for micro-cogeneration is examined for the entire existing stock of small U.S. commercial buildings using a bottom-up method based on 1,236 EnergyPlus models.

  19. (Biotechnology for the conversion of lignocellulosics)

    SciTech Connect (OSTI)

    Woodward, J.

    1990-10-25

    This report summarizes the results of the traveler's participation in the International Energy Agency (IEA) Network planning meeting for Biotechnology for the Conversion of Lignocellulosics,'' held at the Institut Francais du Petrole (IFP), Rueil-Malmaison, France. It also summarizes the results of discussions held at Aston University, Birmingham, UK, with Dr. Martin Beevers with whom the traveler is attempting to initiate a collaborative research project that will be beneficial to ongoing research programs at Oak Ridge National Laboratory (ORNL). The itinerary for the trip is given in Appendix A; the names of the people contacted are listed in Appendix B. Also, pertinent information about the Institut Francais du Petrole is attached (Appendix C). 1 tab.

  20. Central solar heating plants with seasonal storage

    SciTech Connect (OSTI)

    Breger, D.S.; Sunderland, J.E.

    1989-03-01

    The University of Massachusetts has recently started a two year effort to identify and design a significant Central Solar Heating Plant with Seasonal Storage (CSHPSS) in Massachusetts. The work is closely associated with the U.S. participation in the International Energy Agency (IEA) Task on CSHPSS. The University is working closely with the Commonwealth of Massachusetts to assist in identifying State facilities as potential sites and to explore and secure State support which will be essential for product development after the design phase. Currently, the primary site is the University of Massachusetts, Amherst campus with particular interest in several large buildings which are funded for construction over the next 4-5 years. Seasonal thermal energy storage will utilize one of several geological formations.

  1. OC5 Project Phase I: Validation of Hydrodynamic Loading on a Fixed Cylinder: Preprint

    SciTech Connect (OSTI)

    Robertson, A. N.; Wendt, F. F.; Jonkman, J. M.; Popko, W.; Vorpahl, F.; Stansberg, C. T.; Bachynski, E. E.; Bayati, I.; Beyer, F.; de Vaal, J. B.; Harries, R.; Yamaguchi, A.; Shin, H.; Kim, B.; van der Zee, T.; Bozonnet, P.; Aguilo, B.; Bergua, R.; Qvist, J.; Qijun, W.; Chen, X.; Guerinel, M.; Tu, Y.; Yutong, H.; Li, R.; Bouy, L.

    2015-04-23

    This paper describes work performed during the first half of Phase I of the Offshore Code Comparison Collaboration Continuation, with Correlation project (OC5). OC5 is a project run under the IEA Wind Research Task 30, and is focused on validating the tools used for modeling offshore wind systems. In this first phase, simulated responses from a variety of offshore wind modeling tools were modeling tools were validated against tank test data of a fixed, suspended cylinder (without a wind turbine) that was tested under regular and irregular wave conditions at MARINTEK. The results from this phase include an examination of different approaches one can use for defining and calibrating hydrodynamic coefficients for a model, and the importance of higher-order wave models in accurately modeling the hydrodynamic loads on offshore substructures.

  2. Fluidized-bed combustion process evaluation and program support. Annual report, October 1979-September 1980

    SciTech Connect (OSTI)

    Johnson, I.; Podolski, W.F.; Swift, W.M.; Carls, E.L.; Helt, J.E.; Henry, R.F.; Herzenberg, C.L.; Hanway, J.E.; Griggs, K.E.

    1981-03-01

    The purpose of this program is to support the pressurized fluidized-bed combustion project management team at Morgantown Energy Technology Center by providing a core group of experienced personnel (1) to prepare (a) program interaction plans suitable for recommending program needs and (b) recommendations for the DOE-PFBC development program, (2) to analyze data and designs for two large pilot-scale PFBC programs (i.e., Curtiss-Wright and IEA Grimethorpe), and (3) to participate in design/review for the large PFBC programs. Results are reported on a development methodology for the commercialization of PFBC technology, a FBC instrumentation state-of-the-art review, the development of a sodium sulfate dew point measurement instrument, and the evaluation of cyclones for hot gas cleanup.

  3. Investigation of saliva of patients with periodontal disease using NAA

    SciTech Connect (OSTI)

    Zamboni, C. B.; Metairon, S.; Medeiros, I. M. M. A.

    2013-05-06

    In this study the non-stimulated whole saliva of 26 healthy subjects (mean age 33.9 {+-} 11.0 years, range: 26 to 49 years) and 11 patients with periodontal disease (mean age 41.7 {+-} 11.5 years; range 29 to 55 years) was investigated using Neutron Activation Analysis (NAA) technique. The samples were obtained from donors at Sao Paulo city (Brazil). The analyses were performed in the nuclear reactor IEA-R1 (3.5-4.5MW, pool type) at IPEN/CNEN-SP (Brazil). Considerable changes in Ca and S saliva's level were identified in patients with periodontal disease suggesting they can be used as monitors of periodontal diseases.

  4. Assessment of Historic Trend in Mobility and Energy Use in India Transportation Sector Using Bottom-up Approach

    SciTech Connect (OSTI)

    Zhou, Nan; McNeil, Michael A.

    2009-05-01

    Transportation mobility in India has increased significantly in the past decades. From 1970 to 2000, motorized mobility (passenger-km) has risen by 888%, compared with an 88% population growth (Singh,2006). This contributed to many energy and environmental issues, and an energy strategy incorporates efficiency improvement and other measures needs to be designed. Unfortunately, existing energy data do not provide information on driving forces behind energy use and sometime show large inconsistencies. Many previous studies address only a single transportation mode such as passenger road travel; did not include comprehensive data collection or analysis has yet been done, or lack detail on energy demand by each mode and fuel mix. The current study will fill a considerable gap in current efforts, develop a data base on all transport modes including passenger air and water, and freight in order to facilitate the development of energy scenarios and assess significance of technology potential in a global climate change model. An extensive literature review and data collection has been done to establish the database with breakdown of mobility, intensity, distance, and fuel mix of all transportation modes. Energy consumption was estimated and compared with aggregated transport consumption reported in IEA India transportation energy data. Different scenarios were estimated based on different assumptions on freight road mobility. Based on the bottom-up analysis, we estimated that the energy consumption from 1990 to 2000 increased at an annual growth rate of 7% for the mid-range road freight growth case and 12% for the high road freight growth case corresponding to the scenarios in mobility, while the IEA data only shows a 1.7% growth rate in those years.

  5. Offshore Code Comparison Collaboration, Continuation: Phase II Results of a Floating Semisubmersible Wind System: Preprint

    SciTech Connect (OSTI)

    Robertson, A.; Jonkman, J.; Musial, W.; Vorpahl, F.; Popko, W.

    2013-11-01

    Offshore wind turbines are designed and analyzed using comprehensive simulation tools that account for the coupled dynamics of the wind inflow, aerodynamics, elasticity, and controls of the turbine, along with the incident waves, sea current, hydrodynamics, and foundation dynamics of the support structure. The Offshore Code Comparison Collaboration (OC3), which operated under the International Energy Agency (IEA) Wind Task 23, was established to verify the accuracy of these simulation tools [1]. This work was then extended under the Offshore Code Comparison Collaboration, Continuation (OC4) project under IEA Wind Task 30 [2]. Both of these projects sought to verify the accuracy of offshore wind turbine dynamics simulation tools (or codes) through code-to-code comparison of simulated responses of various offshore structures. This paper describes the latest findings from Phase II of the OC4 project, which involved the analysis of a 5-MW turbine supported by a floating semisubmersible. Twenty-two different organizations from 11 different countries submitted results using 24 different simulation tools. The variety of organizations contributing to the project brought together expertise from both the offshore structure and wind energy communities. Twenty-one different load cases were examined, encompassing varying levels of model complexity and a variety of metocean conditions. Differences in the results demonstrate the importance and accuracy of the various modeling approaches used. Significant findings include the importance of mooring dynamics to the mooring loads, the role nonlinear hydrodynamic terms play in calculating drift forces for the platform motions, and the difference between global (at the platform level) and local (at the member level) modeling of viscous drag. The results from this project will help guide development and improvement efforts for these tools to ensure that they are providing the accurate information needed to support the design and

  6. Verification of the New FAST v8 Capabilities for the Modeling of Fixed-Bottom Offshore Wind Turbines: Preprint

    SciTech Connect (OSTI)

    Barahona, B.; Jonkman, J.; Damiani, R.; Robertson, A.; Hayman, G.

    2014-12-01

    Coupled dynamic analysis has an important role in the design of offshore wind turbines because the systems are subject to complex operating conditions from the combined action of waves and wind. The aero-hydro-servo-elastic tool FAST v8 is framed in a novel modularization scheme that facilitates such analysis. Here, we present the verification of new capabilities of FAST v8 to model fixed-bottom offshore wind turbines. We analyze a series of load cases with both wind and wave loads and compare the results against those from the previous international code comparison projects-the International Energy Agency (IEA) Wind Task 23 Subtask 2 Offshore Code Comparison Collaboration (OC3) and the IEA Wind Task 30 OC3 Continued (OC4) projects. The verification is performed using the NREL 5-MW reference turbine supported by monopile, tripod, and jacket substructures. The substructure structural-dynamics models are built within the new SubDyn module of FAST v8, which uses a linear finite-element beam model with Craig-Bampton dynamic system reduction. This allows the modal properties of the substructure to be synthesized and coupled to hydrodynamic loads and tower dynamics. The hydrodynamic loads are calculated using a new strip theory approach for multimember substructures in the updated HydroDyn module of FAST v8. These modules are linked to the rest of FAST through the new coupling scheme involving mapping between module-independent spatial discretizations and a numerically rigorous implicit solver. The results show that the new structural dynamics, hydrodynamics, and coupled solutions compare well to the results from the previous code comparison projects.

  7. INL Results for Phases I and III of the OECD/NEA MHTGR-350 Benchmark...

    Office of Scientific and Technical Information (OSTI)

    is an important step in the code-to-code verification of modern prismatic VHTR codes. ... Country of Publication: United States Language: English Subject: 11 NUCLEAR FUEL CYCLE AND ...

  8. OECD/NEA Burnup Credit Calculational Criticality Benchmark Phase I-B Results

    SciTech Connect (OSTI)

    DeHart, M.D.

    1993-01-01

    Burnup credit is an ongoing technical concern for many countries that operate commercial nuclear power reactors. In a multinational cooperative effort to resolve burnup credit issues, a Burnup Credit Working Group has been formed under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. This working group has established a set of well-defined calculational benchmarks designed to study significant aspects of burnup credit computational methods. These benchmarks are intended to provide a means for the intercomparison of computer codes, methods, and data applied in spent fuel analysis. The benchmarks have been divided into multiple phases, each phase focusing on a particular feature of burnup credit analysis. This report summarizes the results and findings of the Phase I-B benchmark, which was proposed to provide a comparison of the ability of different code systems and data libraries to perform depletion analysis for the prediction of spent fuel isotopic concentrations. Results included here represent 21 different sets of calculations submitted by 16 different organizations worldwide, and are based on a limited set of nuclides determined to have the most important effect on the neutron multiplication factor of light-water-reactor spent fuel. A comparison of all sets of results demonstrates that most methods are in agreement to within 10% in the ability to estimate the spent fuel concentrations of most actinides. All methods are within 11% agreement about the average for all fission products studied. Furthermore, most deviations are less than 10%, and many are less than 5%. The exceptions are {sup 149}Sm, {sup 151}Sm, and {sup 155}Gd.

  9. OECD/NEA burnup credit calculational criticality benchmark Phase I-B results

    SciTech Connect (OSTI)

    DeHart, M.D.; Parks, C.V.; Brady, M.C.

    1996-06-01

    In most countries, criticality analysis of LWR fuel stored in racks and casks has assumed that the fuel is fresh with the maximum allowable initial enrichment. This assumption has led to the design of widely spaced and/or highly poisoned storage and transport arrays. If credit is assumed for fuel burnup, initial enrichment limitations can be raised in existing systems, and more compact and economical arrays can be designed. Such reliance on the reduced reactivity of spent fuel for criticality control is referred to as burnup credit. The Burnup Credit Working Group, formed under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development, has established a set of well-defined calculational benchmarks designed to study significant aspects of burnup credit computational methods. These benchmarks are intended to provide a means for the intercomparison of computer codes, methods, and data applied in spent fuel analysis. The benchmarks have been divided into multiple phases, each phase focusing on a particular feature of burnup credit analysis. This report summarizes the results and findings of the Phase I-B benchmark, which was proposed to provide a comparison of the ability of different code systems and data libraries to perform depletion analysis for the prediction of spent fuel isotopic concentrations. Results included here represent 21 different sets of calculations submitted by 16 different organizations worldwide and are based on a limited set of nuclides determined to have the most important effect on the neutron multiplication factor of light-water-reactor spent fuel. A comparison of all sets of results demonstrates that most methods agree to within 10% in the ability to estimate the spent fuel concentrations of most actinides. All methods agree within 11% about the average for all fission products studied. Most deviations are less than 10%, and many are less than 5%. The exceptions are Sm 149, Sm 151, and Gd 155.

  10. Proceedings of the OECD/CSNI workshop on transient thermal-hydraulic and neutronic codes requirements

    SciTech Connect (OSTI)

    Ebert, D.

    1997-07-01

    This is a report on the CSNI Workshop on Transient Thermal-Hydraulic and Neutronic Codes Requirements held at Annapolis, Maryland, USA November 5-8, 1996. This experts` meeting consisted of 140 participants from 21 countries; 65 invited papers were presented. The meeting was divided into five areas: (1) current and prospective plans of thermal hydraulic codes development; (2) current and anticipated uses of thermal-hydraulic codes; (3) advances in modeling of thermal-hydraulic phenomena and associated additional experimental needs; (4) numerical methods in multi-phase flows; and (5) programming language, code architectures and user interfaces. The workshop consensus identified the following important action items to be addressed by the international community in order to maintain and improve the calculational capability: (a) preserve current code expertise and institutional memory, (b) preserve the ability to use the existing investment in plant transient analysis codes, (c) maintain essential experimental capabilities, (d) develop advanced measurement capabilities to support future code validation work, (e) integrate existing analytical capabilities so as to improve performance and reduce operating costs, (f) exploit the proven advances in code architecture, numerics, graphical user interfaces, and modularization in order to improve code performance and scrutibility, and (g) more effectively utilize user experience in modifying and improving the codes.

  11. OECD MCCI project enhancing instrumentation for reactor materials experiments, Rev. 0 September 3, 2002.

    SciTech Connect (OSTI)

    Lomperski, S.; Basu, S.

    2011-05-23

    Reactor safety experiments for studying the reactions of a molten core (corium) with water and/or concrete involve materials at extremely high temperature. Such high temperature severely restricts the types of sensors that can be employed to measure characteristics of the corium itself. Yet there is great interest in improving instrumentation so that the state of the melt can be established with more precision. In particular, it would be beneficial to increase both the upper range limit and accuracy of temperature measurements. The poor durability of thermocouples at high temperature is also an important issue. For experiments involving a water-quenched melt, direct measurements of the growth rate of the crust separating the melt and water would be of great interest. This is a key element in determining the nature of heat transfer between the melt and coolant. Despite its importance, no one has been able to directly measure the crust thickness during such tests. This paper considers three specialized sensors that could be introduced to enhance melt characterization: (1) A commercially fabricated, single point infrared temperature measurement with the footprint of a thermowell. A lens assembly and fiber optic cable linked to a receiver and amplifier measures the temperature at the base of a tungsten thermowell. The upper range limit is 3000 C and accuracy is {+-}0.25% of the reading. (2) In-house development of an ultrasonic temperature sensor that would provide multipoint measurements at temperatures up to {approx}3000 C. The sensors are constructed from tungsten rods and have a high temperature durability that is superior to that of thermocouples. (3) In-house development of an ultrasonic probe to measure the growth rate of the corium crust. This ultrasonic sensor would include a tungsten waveguide that transmits ultrasonic pulses up through the corium melt towards the crust and detects reflections from the melt/crust interface. A measurement of the echo time delay would provide the location of the interface. These three sensors would provide a considerable upgrade of the instrumentation used in our reactor materials tests. The infracouple is a commercial product that could provide an immediate improvement in temperature measurements. The sensor could also serve to corroborate thermocouple data by providing a measurement based upon a different physical principle. The ultrasonic temperature sensor would involve a greater investment and longer time frame than the infracouple, but offers all the advantages of the infracouple along with miniaturization and the ability to measure at multiple locations. In addition, the UTS is the platform from which we would begin development of the crust detector. Of the three sensors, the crust detector requires the most effort and entails the greatest uncertainty. However, a real-time crust thickness measurement has never before been made and such data would be unique and of great benefit to reactor materials experiments.

  12. OECD NEA Benchmark Database of Spent Nuclear Fuel Isotopic Compositions for World Reactor Designs

    SciTech Connect (OSTI)

    Gauld, Ian C; Sly, Nicholas C; Michel-Sendis, Franco

    2014-01-01

    Experimental data on the isotopic concentrations in irradiated nuclear fuel represent one of the primary methods for validating computational methods and nuclear data used for reactor and spent fuel depletion simulations that support nuclear fuel cycle safety and safeguards programs. Measurement data have previously not been available to users in a centralized or searchable format, and the majority of accessible information has been, for the most part, limited to light-water-reactor designs. This paper describes a recent initiative to compile spent fuel benchmark data for additional reactor designs used throughout the world that can be used to validate computer model simulations that support nuclear energy and nuclear safeguards missions. Experimental benchmark data have been expanded to include VVER-440, VVER-1000, RBMK, graphite moderated MAGNOX, gas cooled AGR, and several heavy-water moderated CANDU reactor designs. Additional experimental data for pressurized light water and boiling water reactor fuels has also been compiled for modern assembly designs and more extensive isotopic measurements. These data are being compiled and uploaded to a recently revised structured and searchable database, SFCOMPO, to provide the nuclear analysis community with a centrally-accessible resource of spent fuel compositions that can be used to benchmark computer codes, models, and nuclear data. The current version of SFCOMPO contains data for eight reactor designs, 20 fuel assembly designs, more than 550 spent fuel samples, and measured isotopic data for about 80 nuclides.

  13. Half-life determination for {sup 108}Ag and {sup 110}Ag

    SciTech Connect (OSTI)

    Zahn, Guilherme S.; Genezini, Frederico A.

    2014-11-11

    In this work, the half-life of the short-lived silver radionuclides {sup 108}Ag and {sup 110}Ag were measured by following the activity of samples after they were irradiated in the IEA-R1 reactor. The results were then fitted using a non-paralizable dead time correction to the regular exponential decay and the individual half-life values obtained were then analyzed using both the Normalized Residuals and the Rajeval techniques, in order to reach the most exact and precise final values. To check the validity of dead-time correction, a second correction method was also employed by means of counting a long-lived {sup 60}Co radioactive source together with the samples as a livetime chronometer. The final half-live values obtained using both dead-time correction methods were in good agreement, showing that the correction was properly assessed. The results obtained are partially compatible with the literature values, but with a lower uncertainty, and allow a discussion on the last ENSDF compilations' values.

  14. Status of the International Energy Agency, Annex 11, Subtask B. 3. (and final) interim report

    SciTech Connect (OSTI)

    Skolnik, E.G.

    1997-10-01

    This document is meant to describe the status of the International Energy Agency (IEA), Annex 11 (Integrated Systems), Subtask B (Analytical Tools) effort being carried out by the Member Nations. This includes Canada, Japan, Italy (inactive at this time), the Netherlands, Spain, Switzerland, and the United States. The Subtask status is taken as of the end of September 1997, following the Fall Experts Meeting. This was held in Toronto, September 23--26. The goal of this Annex is to identify, compile, and integrate models of hydrogen technology components into system models that will describe overall pathways. Examples would include: PV/electrolysis/pipeline transport/hydride storage/PEM fuel cell utilization or natural gas steam reforming/liquefaction/truck transport/hydrogen refueling station. Component models are developed by the Member Nations and integrated into the desired overall system. Subtask B is concerned with identifying and compiling existing component models from Member Nations, or developing these models from data supplied by the Member Nations via Subtask A.

  15. Superconducting magnet development in Japan

    SciTech Connect (OSTI)

    Yasukochi, K.

    1983-05-01

    The present state of R and D works on the superconducting magnet and its applications in Japan are presented. On electrical rotating machines, 30 MVA superconducting synchronous rotary condenser (Mitsubishi and Fuji) and 50 MVA generator are under construction. Two ways of ship propulsion by superconducting magnets are developing. A superconducting magnetically levitated and linear motor propelled train ''MAGLEV'' was developed by the Japan National Railways (JNR). The superconducting magnet development for fusion is the most active field in Japan. The Cluster Test program has been demonstrated on a 10 T Nb/sub 3/Sn coil and the first coil of Large Coil Task in IEA collaboration has been constructed and the domestic test was completed in JAERI. These works are for the development of toroidal coils of the next generation tokamak machine. R and D works on superconducting ohmic heating coil are in progress in JAERI and ETL. The latter group has constructed 3.8 MJ pulsed coil. A high ramp rate of changing field in pulsed magnet, 200 T/s, has been tested successfully. High Energy Physics Laboratory (KEK) are conducting active works. The superconducting ..mu.. meson channel and ..pi.. meson channel have been constructed and are operating successfully. KEK has also a project of big accelerator named ''TRISTAN'', which is similar to ISABELLE project of BNL. Superconducting synchrotron magnets are developed for this project. The development of superconducting three thin wall solenoid has been started. One of them, CDF, is progressing under USA-Japan collaboration.

  16. Design of the Grimethorpe Experimental Facility as of March 1981: a technical report

    SciTech Connect (OSTI)

    Not Available

    1984-06-01

    The Experimental Pressurized Fluidized Bed Combustor, which has been built as an extension to the National Coal Board Power Station, which is adjacent to Grimethorpe Colliery, Yorkshire, England, is described in this report. The Governments of the United Kingdom, the United States of America and the Federal Republic of Germany, under the auspices of the International Energy Agency, have agreed to share equally between them the costs of building and operating the plant. Control of the project was vested in an Executive Committee consisting of one representative of each Government with all decisions requiring unanimity. The actual operation of the project was vested in an Operating Agent, NCB (IEA Services) Ltd., a wholly owned subsidiary of the National Coal Board. The Implementing Agreement envisages a seven year project to be executed in four stages: (1) Procurement of Design Study with accompanying tender documents. (2) Tendering for construction of the Plant; study of appraisal of tenders. (3) Construction and acceptance of the Plant. (4) Operation of the Plant. The project is now towards the end of Stage 3. Construction has been completed and commissioning is in progress to prepare the plant for the start of the operational phase in Autumn 1981. Because of the confidentiality of much of the design information, for the purposes of this report technical descriptions have been confined to that of a general appraisal.

  17. Minimising greenhouse gas emissions from fossil fuels

    SciTech Connect (OSTI)

    Freund, P.

    1997-07-01

    Combustion of fossil fuels is the main anthropogenic source of carbon dioxide, the principal greenhouse gas. Generation of electricity is the single largest user of fossil fuels, world-wide. If there is international agreement about the need to make substantial reductions in greenhouse gas emissions, then having access to suitable, effective technology would be important. This would help avoid the need for precipitate action, such as radical changes in the energy supply systems. Capture and disposal of greenhouse gases from flue gases can achieve substantial reductions in greenhouse gas emissions. This can be realized with known technology. In this paper, the range of options will be summarized and steps needed to achieve further progress will be identified. Emissions of other gases, such as methane, are also expected to influence the climate. Methane is emitted from many anthropogenic sources; the IEA Greenhouse Gas programme is investigating ways of reducing these emissions. Opportunities for abatement of methane emissions associated with coal mining will be described. Reduction in emissions from drainage gas is relatively straightforward and can, in appropriate circumstances, generate useful income for the none operator. More substantial amounts of methane are discharged in mine ventilation air but these are more difficult to deal with. In this paper, a summary will be given of recent progress in reducing methane emissions. Opportunities will be examined for further research to progress these technologies.

  18. Lessons Learned from Safety Events

    SciTech Connect (OSTI)

    Weiner, Steven C.; Fassbender, Linda L.

    2012-11-01

    The Hydrogen Incident Reporting and Lessons Learned website (www.h2incidents.org) was launched in 2006 as a database-driven resource for sharing lessons learned from hydrogen-related safety events to raise safety awareness and encourage knowledge-sharing. The development of this database, its first uses and subsequent enhancements have been described at the Second and Third International Conferences on Hydrogen Safety. [1,2] Since 2009, continuing work has not only highlighted the value of safety lessons learned, but enhanced how the database provides access to another safety knowledge tool, Hydrogen Safety Best Practices (http://h2bestpractices.org). Collaborations with the International Energy Agency (IEA) Hydrogen Implementing Agreement (HIA) Task 19 Hydrogen Safety and others have enabled the database to capture safety event learnings from around the world. This paper updates recent progress, highlights the new Lessons Learned Corner as one means for knowledge-sharing and examines the broader potential for collecting, analyzing and using safety event information.

  19. International Round-Robin Testing of Bulk Thermoelectrics

    SciTech Connect (OSTI)

    Wang, Hsin; Porter, Wallace D; Bottner, Harold; Konig, Jan; Chen, Lidong; Bai, Shengqiang; Tritt, Terry M.; Mayolett, Alex; Smith, Charlene; Harris, Fred; Sharp, Jeff; Lo, Jason; Keinke, Holger; Kiss, Laszlo I.

    2011-11-01

    Two international round-robin studies were conducted on transport properties measurements of bulk thermoelectric materials. The study discovered current measurement problems. In order to get ZT of a material four separate transport measurements must be taken. The round-robin study showed that among the four properties Seebeck coefficient is the one can be measured consistently. Electrical resistivity has +4-9% scatter. Thermal diffusivity has similar +5-10% scatter. The reliability of the above three properties can be improved by standardizing test procedures and enforcing system calibrations. The worst problem was found in specific heat measurements using DSC. The probability of making measurement error is great due to the fact three separate runs must be taken to determine Cp and the baseline shift is always an issue for commercial DSC. It is suggest the Dulong Petit limit be always used as a guide line for Cp. Procedures have been developed to eliminate operator and system errors. The IEA-AMT annex is developing standard procedures for transport properties testing.

  20. India Energy Outlook: End Use Demand in India to 2020

    SciTech Connect (OSTI)

    de la Rue du Can, Stephane; McNeil, Michael; Sathaye, Jayant

    2009-03-30

    Integrated economic models have been used to project both baseline and mitigation greenhouse gas emissions scenarios at the country and the global level. Results of these scenarios are typically presented at the sectoral level such as industry, transport, and buildings without further disaggregation. Recently, a keen interest has emerged on constructing bottom up scenarios where technical energy saving potentials can be displayed in detail (IEA, 2006b; IPCC, 2007; McKinsey, 2007). Analysts interested in particular technologies and policies, require detailed information to understand specific mitigation options in relation to business-as-usual trends. However, the limit of information available for developing countries often poses a problem. In this report, we have focus on analyzing energy use in India in greater detail. Results shown for the residential and transport sectors are taken from a previous report (de la Rue du Can, 2008). A complete picture of energy use with disaggregated levels is drawn to understand how energy is used in India and to offer the possibility to put in perspective the different sources of end use energy consumption. For each sector, drivers of energy and technology are indentified. Trends are then analyzed and used to project future growth. Results of this report provide valuable inputs to the elaboration of realistic energy efficiency scenarios.

  1. OECD MCCI project long-term 2-D molten core concrete interaction test design report, Rev. 0. September 30, 2002.

    SciTech Connect (OSTI)

    Farmer, M. T.; Kilsdonk, D. J.; Lomperski, S.; Aeschliman, R. W.; Basu, S. (Nuclear Engineering Division); (NRC)

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following two technical objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of the first program objective, the Small-Scale Water Ingression and Crust Strength (SSWICS) test series has been initiated to provide fundamental information on the ability of water to ingress into cracks and fissures that form in the debris during quench, thereby augmenting the otherwise conduction-limited heat transfer process. A test plan for Melt Eruption Separate Effects Tests (MESET) has also been developed to provide information on the extent of crust growth and melt eruptions as a function of gas sparging rate under well-controlled experiment conditions. In terms of the second program objective, the project Management Board (MB) has approved startup activities required to carry out experiments to address remaining uncertainties related to long-term two-dimensional molten core-concrete interaction. In particular, for both wet and dry cavity conditions, there is uncertainty insofar as evaluating the lateral vs. axial power split during a core-concrete interaction due to a lack of experiment data. As a result, there are differences in the 2-D cavity erosion predicted by codes such as MELCOR, WECHSL, and COSACO. The first step towards generating this data is to produce a test plan for review by the Project Review Group (PRG). The purpose of this document is to provide this plan.

  2. Consistent Comparison of the Codes RELAP5/PARCS and TRAC-M/PARCS for the OECD MSLB Coupled Code Benchmark

    SciTech Connect (OSTI)

    Kozlowski, Tomasz; Miller, R. Matthew; Downar, Thomas J.; Barber, Douglas A.; Joo, Han Gyu

    2004-04-15

    A generalized interface module was developed for coupling any thermal-hydraulic code to any spatial kinetic code. In the design used here the thermal-hydraulic and spatial kinetic codes function as independent processes and communicate using the Parallel Virtual Machine software. This approach helps maximize flexibility while minimizing modifications to the respective codes. Using this interface, the U.S. Nuclear Regulatory Commission (NRC) three-dimensional neutron kinetic code, Purdue Advanced Reactor Core Simulator (PARCS), has been coupled to the NRC system analysis codes RELAP5 and Modernized Transient Reactor Analysis Code (TRAC-M). Consistent comparison of code results for the Organization for Economic Cooperation and Development/Nuclear Energy Agency main steam line break benchmark problem using RELAP5/PARCS and TRAC-M/PARCS was made to assess code performance.

  3. Simulation of the OECD Main-Steam-Line-Break Benchmark Exercise 3 Using the Coupled RELAP5/PANTHER Codes

    SciTech Connect (OSTI)

    Schneidesch, Christophe R.; Zhang Jinzhao

    2004-04-15

    The RELAP5 best-estimate thermal-hydraulic system code has been coupled with the PANTHER three-dimensional neutron kinetics code via the TALINK dynamic data exchange control and processing tool. The coupled RELAP5/PANTHER code package has been qualified and will be used at Tractebel Engineering (TE) for analyzing asymmetric pressurized water reactor (PWR) accidents with strong core-system interactions. The Organization for Economic Cooperation and Development/U.S. Nuclear Regulatory Commission PWR main-steam-line-break benchmark problem was analyzed as part of the qualification efforts to demonstrate the capability of the coupled code package of simulating such transients. This paper reports the main results of TE's contribution to the benchmark Exercise 3.

  4. Hydrogen from biomass: state of the art and research challenges

    SciTech Connect (OSTI)

    Milne, Thomas A; Elam, Carolyn C; Evans, Robert J

    2002-02-01

    The report was prepared for the International Energy Agency (IEA) Agreement on the Production and Utilization of Hydrogen, Task 16, Hydrogen from Carbon-Containing Materials. Hydrogen's share in the energy market is increasing with the implementation of fuel cell systems and the growing demand for zero-emission fuels. Hydrogen production will need to keep pace with this growing market. In the near term, increased production will likely be met by conventional technologies, such as natural gas reforming. In these processes, the carbon is converted to CO2 and released to the atmosphere. However, with the growing concern about global climate change, alternatives to the atmospheric release of CO2 are being investigated. Sequestration of the CO2 is an option that could provide a viable near-term solution. Reducing the demand on fossil resources remains a significant concern for many nations. Renewable-based processes like solar- or wind-driven electrolysis and photobiological water splitting hold great promise for clean hydrogen production; however, advances must still be made before these technologies can be economically competitive. For the near-and mid-term, generating hydrogen from biomass may be the more practical and viable, renewable and potentially carbon-neutral (or even carbon-negative in conjunction with sequestration) option. Recently, the IEA Hydrogen Agreement launched a new task to bring together international experts to investigate some of these near- and mid-term options for producing hydrogen with reduced environmental impacts. This review of the state of the art of hydrogen production from biomass was prepared to facilitate in the planning of work that should be done to achieve the goal of near-term hydrogen energy systems. The relevant technologies that convert biomass to hydrogen, with emphasis on thermochemical routes are described. In evaluating the viability of the conversion routes, each must be put in the context of the availability of

  5. Test program to simulate PFBC tube bundle metal wastage. Final report

    SciTech Connect (OSTI)

    Newby, R.A.; Kittle, W.F.

    1984-05-01

    The Westinghouse R and D Center conducted a series of laboratory-scale tests to (1) investigate two potential mechanisms for tube erosion in the IEA Grimethorpe PFBC tests: dense-phase abrasion and dilute-phase impact erosion; and to (2) compare the relative erosivity of several bed particle materials. Maximum dilute- and dense-phase velocities in the Grimethorpe unit were estimated from tube Bank A and tube Bank C test conditions and used to set the laboratory test conditions for the two units. Sand, raw dolomite and bed materials from Grimethorpe and from the New York University (NYU) PFBC facility were tested. With the maximum dilute- and dense-phase velocities estimated for Grimethorpe, tube erosion was substantial by both mechanisms for test durations of up to 100 hours. Dilute-phase impacts with fine sand resulted in local material losses at the impact point. Dilute-phase tests with coarse Grimethorpe bed materials, though, were not valid tests because of the short particle acceleration lengths available. The erosion pattern with the dense-phase testing led to a flattening of the tube face. The dense-phase erosion pattern was similar to the Grimethorpe tubes examined and described in DOE reports. We conclude that high-velocity, dense-phase streaming is the likely mechanism of erosion in the Grimethorpe unit. Tube erosion rates can be reduced by operating at lower fluidization velocities and with a smaller content of large particles (>2000 ..mu..m) in the bed. Behavior will change little with different types of sorbents and coals. High rates of particle attrition and tube deposition were also observed. 15 refs., 12 figs., 1 tab.

  6. Strategic planning -- task 7.1. Topical report, February 1994--June 1995

    SciTech Connect (OSTI)

    Daly, D.J.

    1996-01-01

    The nations of East Central Europe regained their political and economic freedom in 1989, ending nearly a half century of centrally planned economies under the hegemony of the former Soviet Union (FSU). These nations are now emerging from economic conditions marked by price distortions and a focus on heavy industry, isolation from world markets, and a lack of occupational health and environmental safeguards. Economic recovery, environmental restoration, and political stability, as well as eventual entrance into the European Community (EC), require a reordering of policies and priorities, including those bearing on energy and the environment. This report, prepared as a background document for the Second International Conference on Energy and Environment to be held in Prague in November 1994, is composed of a summary table and supporting text and is intended to provide a concise review of issues related to energy and the environment for the Czech and Slovak Republics, Hungary, Poland, and Bulgaria. Organized by subject and country, Table 1 contains country profiles (Row A), information on the economy (Row B), primary energy consumption, environmental priorities, energy resources, production, and utilization (Rows C, D, F, G, H, and 1), electrical generation and transmission (Rows J and K), district heating (Row L), briquettes (Row M), and environmental regulations (Row N). Pertinent policy goals, issues, and trends are noted. The reports is based largely on a review of documents published by the International Energy Agency (IEA) and the U.S. Department of Energy (DOE), as well as selected sources obtained from the countries of the region. Reference citations are keyed to information presented in Table 1.

  7. Newberry Volcano EGS Demonstration - Phase I Results

    SciTech Connect (OSTI)

    William L. Osborn, Susan Petty, Trenton T. Cladouhos, Joe Iovenitti, Laura Nofziger, Owen Callahan, Douglas S. Perry and Paul L. Stern

    2011-10-23

    Phase I of the Newberry Volcano Enhanced Geothermal System (EGS) Demonstration included permitting, community outreach, seismic hazards analysis, initial microseismic array deployment and calibration, final MSA design, site characterization, and stimulation planning. The multi-disciplinary Phase I site characterization supports stimulation planning and regulatory permitting, as well as addressing public concerns including water usage and induced seismicity. A review of the project'™s water usage plan by an independent hydrology consultant found no expected impacts to local stakeholders, and recommended additional monitoring procedures. The IEA Protocol for Induced Seismicity Associated with Enhanced Geothermal Systems was applied to assess site conditions, properly inform stakeholders, and develop a comprehensive mitigation plan. Analysis of precision LiDAR elevation maps has concluded that there is no evidence of recent faulting near the target well. A borehole televiewer image log of the well bore revealed over three hundred fractures and predicted stress orientations. No natural, background seismicity has been identified in a review of historic data, or in more than seven months of seismic data recorded on an array of seven seismometers operating around the target well. A seismic hazards and induced seismicity risk assessment by an independent consultant concluded that the Demonstration would contribute no additional risk to residents of the nearest town of La Pine, Oregon. In Phase II of the demonstration, an existing deep hot well, NWG 55-29, will be stimulated using hydroshearing techniques to create an EGS reservoir. The Newberry Volcano EGS Demonstration is allowing geothermal industry and academic experts to develop, validate and enhance geoscience and engineering techniques, and other procedures essential to the expansion of EGS throughout the country. Successful development will demonstrate to the American public that EGS can play a

  8. Conjunction of Multizone Infiltration Specialists (COMIS) fundamentals

    SciTech Connect (OSTI)

    Feustel, H.E.; Rayner-Hooson, A.

    1990-05-01

    The COMIS workshop (Conjunction of Multizone Infiltration Specialists) was a joint research effort to develop a multizone infiltration mode. This workshop (October 1988--September 1989) was hosted by the Energy Performance of Buildings Group at Lawrence Berkeley Laboratory's Applied Science Division. The task of the workshop was to develop a detailed multizone infiltration program taking crack flow, HVAC-systems, single-sided ventilation and transport mechanism through large openings into account. This work was accomplished not by investigating into numerical description of physical phenomena but by reviewing the literature for the best suitable algorithm. The numerical description of physical phenomena is clearly a task of IEA-Annex XX Air Flow Patterns in Buildings,'' which will be finished in September 1991. Multigas tracer measurements and wind tunnel data will be used to check the model. The agenda integrated all participants' contributions into a single model containing a large library of modules. The user-friendly program is aimed at researchers and building professionals. From its announcement in December 1986, COMIS was well received by the research community. Due to the internationality of the group, several national and international research programmes were co-ordinated with the COMIS workshop. Colleagues for France, Italy, Japan, The Netherlands, People's Republic of China, Spain, Sweden, Switzerland, and the United States of America were working together on the development of the model. Even though this kind of co-operation is well known in other fields of research, e.g., high energy physics; for the field of building physics it is a new approach. This document contains an overview about infiltration modelling as well as the physics and the mathematics behind the COMIS model. 91 refs., 38 figs., 9 tabs.

  9. Greenhouse gas mitigation technology results of CO{sub 2} capture & disposal studies

    SciTech Connect (OSTI)

    Audus, H.; Riemer, P.W.F.; Ormerod, W.G.

    1995-12-31

    In response to the increase in the global concentrations of greenhouse gases, the IEA Greenhouse Gas R&D Programme is carrying out an assessment of greenhouse gas abatement technologies with particular reference to carbon dioxide emissions from fossil-fuel power generation systems. The Programme has examined, on a consistent basis, the options available for capturing and disposing of the CO{sub 2} product from a range of gas and coal fired power generation plant types, each with an output of 500MW(e). Systems under consideration include PF+FGD, IGCC, NGCC and a CO{sub 2}/O{sub 2} recycle scheme. CO{sub 2} capture technologies considered include chemical and physical absorption, solid adsorption, cryogenics, membrane separation and gas separation membranes. Carbon dioxide disposal options considered are; disposal in the oceans, in aquifers, in depleted gas reservoirs and terrestrial storage as a solid. In addition, a number of studies have evaluated the utilisation of CO{sub 2} for enhanced oil recovery and the manufacture of chemicals, including a detailed investigation of dimethyl carbonate production. Comparison is also made with the alternative stance of compensatory forest plantations and substitution of fossil fuels with biomass. Emphasis has been placed on a requirement to determine the impact of the various technologies on the cost of electricity generation. This has been achieved by analysing the core of specific schemes, on a common basis, and comparative results are presented for various CO{sub 2} abatement options. A member of studies have also been carried out to evaluate transport options and the environmental impact of these technology combinations for carbon dioxide disposal. The results indicate that by combining the most favourable technologies for CO{sub 2} capture and disposal to efficient power generation technology, electricity generation costs could be increased by around 50%. Alternative schemes have similar or even greater cost penalties.

  10. Tethys and Annex IV Progress Report for FY 2012

    SciTech Connect (OSTI)

    Hanna, Luke A.; Butner, R. Scott; Whiting, Jonathan M.; Copping, Andrea E.

    2013-09-01

    The marine and hydrokinetic (MHK) environmental Impacts Knowledge Management System, dubbed “Tethys” after the mythical Greek titaness of the seas, is being developed by the Pacific Northwest National Laboratory (PNNL) to support the U.S. Department of Energy’s Wind and Water Power Program (WWPP). Functioning as a smart database, Tethys enables its users to identify key words or terms to help gather, organize and make available information and data pertaining to the environmental effects of MHK and offshore wind (OSW) energy development. By providing and categorizing relevant publications within a simple and searchable database, Tethys acts as a dissemination channel for information and data which can be utilized by regulators, project developers and researchers to minimize the environmental risks associated with offshore renewable energy developments and attempt to streamline the permitting process. Tethys also houses a separate content-related Annex IV data base with identical functionality to the Tethys knowledge base. Annex IV is a collaborative project among member nations of the International Energy Agency (IEA) Ocean Energy Systems – Implementing Agreement (OES-IA) that examines the environmental effects of ocean energy devices and projects. The U.S. Department of Energy leads the Annex IV working with federal partners such as the Federal Energy Regulatory Commission (FERC), the Bureau of Ocean Energy Management (BOEM), and the National Oceanic Atmospheric Administration (NOAA). While the Annex IV database contains technical reports and journal articles, it is primarily focused on the collection of project site and research study metadata forms (completed by MHK researchers and developers around the world, and collected by PNNL) which provide information on environmental studies and the current progress of the various international MHK developments in the Annex IV member nations. The purpose of this report is to provide a summary of the content

  11. Comparative Analysis of Modeling Studies on China's Future Energy and Emissions Outlook

    SciTech Connect (OSTI)

    Zheng, Nina; Zhou, Nan; Fridley, David

    2010-09-01

    The past decade has seen the development of various scenarios describing long-term patterns of future Greenhouse Gas (GHG) emissions, with each new approach adding insights to our understanding of the changing dynamics of energy consumption and aggregate future energy trends. With the recent growing focus on China's energy use and emission mitigation potential, a range of Chinese outlook models have been developed across different institutions including in China's Energy Research Institute's 2050 China Energy and CO2 Emissions Report, McKinsey & Co's China's Green Revolution report, the UK Sussex Energy Group and Tyndall Centre's China's Energy Transition report, and the China-specific section of the IEA World Energy Outlook 2009. At the same time, the China Energy Group at Lawrence Berkeley National Laboratory (LBNL) has developed a bottom-up, end-use energy model for China with scenario analysis of energy and emission pathways out to 2050. A robust and credible energy and emission model will play a key role in informing policymakers by assessing efficiency policy impacts and understanding the dynamics of future energy consumption and energy saving and emission reduction potential. This is especially true for developing countries such as China, where uncertainties are greater while the economy continues to undergo rapid growth and industrialization. A slightly different assumption or storyline could result in significant discrepancies among different model results. Therefore, it is necessary to understand the key models in terms of their scope, methodologies, key driver assumptions and the associated findings. A comparative analysis of LBNL's energy end-use model scenarios with the five above studies was thus conducted to examine similarities and divergences in methodologies, scenario storylines, macroeconomic drivers and assumptions as well as aggregate energy and emission scenario results. Besides directly tracing different energy and CO{sub 2} savings potential

  12. [Energy and environmental research emphasizing low-rank coal]: Task 7.1, Strategic planning. Topical report, February 1, 1994--June 30, 1995

    SciTech Connect (OSTI)

    1996-01-01

    The nations of East Central Europe regained their political and economic freedom in 1989, ending nearly a half century of centrally planned economies under the hegemony of the former Soviet Union (FSU). These nations are now emerging from economic conditions marked by price distortions and a focus on heavy industry, isolation from world markets, and a lack of occupational health and environmental safeguards. Economic recovery, environmental restoration, and political stability, as well as eventual entrance into the European Community (EC), require a reordering of policies and priorities, including those bearing on energy and the environment. This report, prepared as a background document for the Second International Conference on Energy and Environment to be held in Prague in November 1994, is composed of a summary table (Table 1) and supporting text and is intended to provide a concise review of issues related to energy and the environment for the Czech and Slovak Republics, Hungary, Poland, and Bulgaria. Organized by subject and country, Table 1 contains country profiles (Row A), information on the economy (Row B), primary energy consumption, environmental priorities, energy resources, production, and utilization (Rows C, D, F, G, H, and I), electrical generation and transmission (Rows J and K), district heating (Row L), briquettes (Row M), and environmental regulations (Row N). Pertinent policy goals, issues, and trends are noted. The reports is based largely on a review of documents published by the International Energy Agency (IEA) and the U.S. Department of Energy (DOE), as well as selected sources obtained from the countries of the region. Reference citations are keyed to information presented in Table 1.

  13. Trends in emissions of acidifying species in Asia, 1985-1997.

    SciTech Connect (OSTI)

    Streets, D. G.; Tsai, N. Y.; Akimoto, H.; Oka, K.

    2000-05-31

    Acid deposition is a serious problem throughout much of Asia. Emissions of sulfur dioxide (SO{sub 2}) and nitrogen oxides (NO{sub x}) have been increasing steadily, as nations strive to increase their levels of economic development. Coal and fuel oil have been the main choices for powering industrial development; and, until recently, only a few countries (notably Japan and Taiwan) had taken significant steps to avert the atmospheric emissions that accompany fuel combustion. This paper discusses trends in emissions of SO{sub 2} and NO{sub x} that have occurred in Asian countries in the period 1985--1997, using results from the RAINS-ASIA computer model and energy-use trends from the IEA Energy Statistics and Balances database. Emissions of SO{sub 2} in Asia grew from 26.6 Tg in 1985 to 33.7 Tg in 1990 and to 39.2 Tg in 1997. Though SO{sub 2} emissions used to grow as fast as fossil-fuel use, recent limitations on the sulfur content of coal and oil have slowed the growth. The annual-average emissions growth between 1990 and 1997 was only 1.1%, considerably less than the economic growth rate. Emissions of NO{sub x}, on the other hand, continue to grow rapidly, from 14.1 Tg in 1985 to 18.7 Tg in 1990 and 28.5 Tg in 1997, with no signs of abating. Thus, though SO{sub 2} remains the major contributor to acidifying emissions in Asia, the role of NO{sub x}, will become more and more important in the future.

  14. Experimentally validated long-term energy production prediction model for solar dish/Stirling electric generating systems

    SciTech Connect (OSTI)

    Stine, W.B.

    1995-12-31

    Dish/Stirling solar electric systems are currently being tested for performance and longevity in order to bring them to the electric power generation market. Studies both in Germany and the United States indicate that a significant market exists for these systems if they perform in actual installations according to tested conditions, and if, when produced in large numbers their cost will drop to goals currently being projected. In the 1980`s, considerable experience was gained operating eight dish/Stirling systems of three different designs. One of these recorded the world`s record for converting solar energy into electricity of 29.4%. The approach to system performance prediction taken in this presentation results from lessons learned in testing these early systems, and those currently being tested. Recently the IEA through the SolarPACES working group, has embarked on a program to develop uniform guidelines for measuring and presenting performance data. These guidelines are to help potential buyers who want to evaluate a specific system relative to other dish/Stirling systems, or relative to other technologies such as photovoltaic, parabolic trough or central receiver systems. In this paper, a procedure is described that permits modeling of long-term energy production using only a few experimentally determined parameters. The benefit of using this technique is that relatively simple tests performed over a period of a few months can provide performance parameters that can be used in a computer model requiring only the input of insolation and ambient temperature data to determine long-term energy production information. A portion of this analytical procedure has been tested on the three 9-kW(e) systems in operation in Almeria, Spain. Further evaluation of these concepts is planned on a 7.5-kW(e) system currently undergoing testing at Cal Poly University in Pomona, California and later on the 25 kW(e) USJVP systems currently under development.

  15. Glazing materials for solar and architectural applications. Final report

    SciTech Connect (OSTI)

    Lampert, C.M.

    1994-09-01

    This report summarizes five collaborative research projects on glazings performed by participants in Subtask C of IEA Solar Heating and Cooling Programme (SHC) Task 10, Materials Research and Testing. The projects include materials characterization, optical and thermal measurements, and durability testing of several types of new glazings Three studies were completed on electrochromic and dispersed liquid crystals for smart windows, and two were completed for low-E coatings and transparent insulation materials for more conventional window and wall applications. In the area of optical switching materials for smart windows, the group developed more uniform characterization parameters that are useful to determine lifetime and performance of electrochromics. The detailed optical properties of an Asahi (Japan) prototype electrochromic window were measured in several laboratories. A one square meter array of prototype devices was tested outdoors and demonstrated significant cooling savings compared to tinted static glazing. Three dispersed liquid crystal window devices from Taliq (USA) were evaluated. In the off state, these liquid crystal windows scatter light greatly. When a voltage of about 100 V ac is applied, these windows become transparent. Undyed devices reduce total visible light transmittance by only .25 when switched, but this can be increased to .50 with the use of dyed liquid crystals. A wide range of solar-optical and emittance measurements were made on low-E coated glass and plastic. Samples of pyrolytic tin oxide from Ford glass (USA) and multilayer metal-dielectric coatings from Interpane (Germany) and Southwall (USA) were evaluated. In addition to optical characterization, the samples were exposure-tested in Switzerland. The thermal and optimal properties of two different types of transparent insulation materials were measured.

  16. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-03-01

    This report presents data on international oil production, demand, imports, exports, and stocks. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  17. Energy & Financial Markets - Crudeoil - U.S. Energy Information

    Gasoline and Diesel Fuel Update (EIA)

    Administration (EIA) OECD The Organization of Economic Cooperation and Development (OECD) consists of the United States, much of Europe, and other advanced countries. At 53 percent of world oil consumption in 2010, these large economies consume more oil than the non-OECD countries, but have much lower oil consumption growth. Oil consumption in the OECD countries actually declined in the decade between 2000 and 2010, whereas non-OECD consumption rose 40 percent during the same period. In OECD

  18. ENV-Linkages General Equilibrium Model | Open Energy Information

    Open Energy Info (EERE)

    Topics: Co-benefits assessment Resource Type: Softwaremodeling tools Website: www.oecd.orgofficialdocumentsdisplaydocumentpdf?coteECOWKP(2008)6 References: OECD1...

  19. Word Pro - S11

    Gasoline and Diesel Fuel Update (EIA)

    ... U.S. Territories; for 1984 forward, Mexico; and, for 2000 forward, Chile, Estonia, and Israel. d The Organization for Economic Cooperation and Development (OECD) consists of "OECD ...

  20. OECD MCCI project 2-D Core Concrete Interaction (CCI) tests : CCI-3 test data report-thermalhydraulic results. Rev. 0 October 15, 2005.

    SciTech Connect (OSTI)

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of a third long-term 2-D Core-Concrete Interaction (CCI) experiment designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. This data report provides thermal hydraulic test results from the CCI-3 experiment, which was conducted on September 22, 2005. Test specifications for CCI-3 are provided in Table 1-1. This experiment investigated the interaction of a fully oxidized 375 kg PWR core melt, initially containing 15 wt% siliceous concrete, with a specially designed two-dimensional siliceous concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The sand and aggregate constituents for this particular siliceous concrete were provided by CEA as an in-kind contribution to the program. The report begins by providing a summary description of the CCI-3 test apparatus and operating procedures, followed by presentation of the thermal-hydraulic results. Detailed posttest debris examination results will be provided in a subsequent publication. Observations drawn within this report regarding the overall cavity erosion behavior may be subject to revision once the posttest examinations are completed, since these examinations will fully reveal the final cavity shape.

  1. OECD MCCI 2-D Core Concrete Interaction (CCI) tests : CCI-2 test data report-thermalhydraulic results, Rev. 0 October 15, 2004.

    SciTech Connect (OSTI)

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of two long-term 2-D Core-Concrete Interaction (CCI) experiments designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. This data report provides thermal hydraulic test results from the CCI-2 experiment, which was conducted on August 24, 2004. Test specifications for CCI-2 are provided in Table 1-1. This experiment investigated the interaction of a fully oxidized 400 kg PWR core melt, initially containing 8 wt % Limestone/Common Sand (LCS) concrete, with a specially designed two-dimensional LCS concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The report begins by providing a summary description of the CCI-2 test apparatus and operating procedures, followed by presentation of the thermal-hydraulic results. Detailed posttest debris examination results will be provided in a subsequent publication. Observations drawn within this report regarding the overall cavity erosion behavior may be subject to revision once the posttest examinations are completed, since these examinations will fully reveal the final cavity shape.

  2. OECD MMCI 2-D Core Concrete Interaction (CCI) tests : CCCI-1 test data report-thermalhydraulic results. Rev 0 January 31, 2004.

    SciTech Connect (OSTI)

    Farmer, M. T.; Lomperski, S.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten coreconcrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of two long-term 2-D Core-Concrete Interaction (CCI) experiments designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. This data report provides thermal hydraulic test results from the CCI-1 experiment, which was conducted on December 19, 2003. Test specifications for CCI-1 are provided in Table 1-1. This experiment investigated the interaction of a fully oxidized 400 kg PWR core melt, initially containing 8 wt % calcined siliceous concrete, with a specially designed two-dimensional siliceous concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The report begins by providing a summary description of the CCI-1 test apparatus and operating procedures, followed by presentation of the thermal-hydraulic results. The posttest debris examination results will be provided in a subsequent publication. Observations drawn within this report regarding the overall cavity erosion behavior may be subject to revision once the posttest examinations are completed, since these examinations will fully reveal the final cavity shape.

  3. Analysis of the OECD/NRC BWR Turbine Trip Transient Benchmark with the Coupled Thermal-Hydraulics and Neutronics Code TRAC-M/PARCS

    SciTech Connect (OSTI)

    Lee, Deokjung; Downar, Thomas J.; Ulses, Anthony; Akdeniz, Bedirhan; Ivanov, Kostadin N.

    2004-10-15

    An analysis of the Peach Bottom Unit 2 Turbine Trip 2 (TT2) experiment has been performed using the U.S. Nuclear Regulatory Commission coupled thermal-hydraulics and neutronics code TRAC-M/PARCS. The objective of the analysis was to assess the performance of TRAC-M/PARCS on a BWR transient with significance in two-phase flow and spatial variations of the neutron flux. TRAC-M/PARCS results are found to be in good agreement with measured plant data for both steady-state and transient phases of the benchmark. Additional analyses of four fictitious extreme scenarios are performed to provide a basis for code-to-code comparisons and comprehensive testing of the thermal-hydraulics/neutronics coupling. The obtained results of sensitivity studies on the effect of direct moderator heating on transient simulation indicate the importance of this modeling aspect.

  4. Using the OECD/NRC Pressurized Water Reactor Main Steam Line Break Benchmark to Study Current Numerical and Computational Issues of Coupled Calculations

    SciTech Connect (OSTI)

    Ivanov, Kostadin N.; Todorova, Nadejda K.; Sartori, Enrico

    2003-05-15

    Incorporating full three-dimensional (3-D) models of the reactor core into system transient codes allows for a 'best-estimate' calculation of interactions between the core behavior and plant dynamics. Recent progress in computer technology has made the development of coupled thermal-hydraulic (T-H) and neutron kinetics code systems feasible. Considerable efforts have been made in various countries and organizations in this direction. Appropriate benchmarks need to be developed that will permit testing of two particular aspects. One is to verify the capability of the coupled codes to analyze complex transients with coupled core-plant interactions. The second is to test fully the neutronics/T-H coupling. One such benchmark is the Pressurized Water Reactor Main Steam Line Break (MSLB) Benchmark problem. It was sponsored by the Organization for Economic Cooperation and Development, U.S. Nuclear Regulatory Commission, and The Pennsylvania State University. The benchmark problem uses a 3-D neutronics core model that is based on real plant design and operational data for the Three Mile Island Unit 1 nuclear power plant. The purpose of this benchmark is threefold: to verify the capability of system codes for analyzing complex transients with coupled core-plant interactions; to test fully the 3-D neutronics/T-H coupling; and to evaluate discrepancies among the predictions of coupled codes in best-estimate transient simulations. The purposes of the benchmark are met through the application of three exercises: a point kinetics plant simulation (exercise 1), a coupled 3-D neutronics/core T-H evaluation of core response (exercise 2), and a best-estimate coupled core-plant transient model (exercise 3).In this paper we present the three exercises of the MSLB benchmark, and we summarize the findings of the participants with regard to the current numerical and computational issues of coupled calculations. In addition, this paper reviews in some detail the sensitivity studies on exercises 2 and 3 performed by the benchmark team using the coupled code TRAC-PF1/NEM. The purpose of these supporting studies was to aid participants in developing their models.

  5. Evaluation of select heat and pressure measurement gauges for potential use in the NRC/OECD High Energy Arc Fault (HEAF) test program.

    SciTech Connect (OSTI)

    Lopez, Carlos; Wente, William Baker; Figueroa, Victor G.

    2014-01-01

    In an effort to improve the current state of the art in fire probabilistic risk assessment methodology, the U.S. Nuclear Regulatory Commission, Office of Regulatory Research, contracted Sandia National Laboratories (SNL) to conduct a series of scoping tests to identify thermal and mechanical probes that could be used to characterize the zone of influence (ZOI) during high energy arc fault (HEAF) testing. For the thermal evaluation, passive and active probes were exposed to HEAF-like heat fluxes for a period of 2 seconds at the SNLs National Solar Thermal Test Facility to determine their ability to survive and measure such an extreme environment. Thermal probes tested included temperature lacquers (passive), NANMAC thermocouples, directional flame thermometers, modified plate thermometers, infrared temperature sensors, and a Gardon heat flux gauge. Similarly, passive and active pressure probes were evaluated by exposing them to pressures resulting from various high-explosive detonations at the Sandia Terminal Ballistic Facility. Pressure probes included bikini pressure gauges (passive) and pressure transducers. Results from these tests provided good insight to determine which probes should be considered for use during future HEAF testing.

  6. Energy & Financial Markets - U.S. Energy Information Administration (EIA) -

    Gasoline and Diesel Fuel Update (EIA)

    U.S. Energy Information Administration (EIA) OECD The Organization of Economic Cooperation and Development (OECD) consists of the United States, much of Europe, and other advanced countries. At 53 percent of world oil consumption in 2010, these large economies consume more oil than the non-OECD countries, but have much lower oil consumption growth. Oil consumption in the OECD countries actually declined in the decade between 2000 and 2010, whereas non-OECD consumption rose 40 percent during

  7. Daylighting simulation: methods, algorithms, and resources

    SciTech Connect (OSTI)

    Carroll, William L.

    1999-12-01

    This document presents work conducted as part of Subtask C, ''Daylighting Design Tools'', Subgroup C2, ''New Daylight Algorithms'', of the IEA SHC Task 21 and the ECBCS Program Annex 29 ''Daylight in Buildings''. The search for and collection of daylighting analysis methods and algorithms led to two important observations. First, there is a wide range of needs for different types of methods to produce a complete analysis tool. These include: Geometry; Light modeling; Characterization of the natural illumination resource; Materials and components properties, representations; and Usability issues (interfaces, interoperability, representation of analysis results, etc). Second, very advantageously, there have been rapid advances in many basic methods in these areas, due to other forces. They are in part driven by: The commercial computer graphics community (commerce, entertainment); The lighting industry; Architectural rendering and visualization for projects; and Academia: Course materials, research. This has led to a very rich set of information resources that have direct applicability to the small daylighting analysis community. Furthermore, much of this information is in fact available online. Because much of the information about methods and algorithms is now online, an innovative reporting strategy was used: the core formats are electronic, and used to produce a printed form only secondarily. The electronic forms include both online WWW pages and a downloadable .PDF file with the same appearance and content. Both electronic forms include live primary and indirect links to actual information sources on the WWW. In most cases, little additional commentary is provided regarding the information links or citations that are provided. This in turn allows the report to be very concise. The links are expected speak for themselves. The report consists of only about 10+ pages, with about 100+ primary links, but with potentially thousands of indirect links. For purposes of

  8. RES-E-NEXT: Next Generation of RES-E Policy Instruments

    SciTech Connect (OSTI)

    Miller, M.; Bird, L.; Cochran, J.; Milligan, M.; Bazilian, M.; Denny, E.; Dillon, J.; Bialek, J.; O'Malley, M.; Neuhoff, K.

    2013-07-04

    The rapid deployment of renewable sources of electricity (RES-E) is transforming power systems globally. This trend is likely to continue with large increases in investment and deployment of RES-E capacity over the coming decades. Several countries now have penetration levels of variable RES-E generation (i.e., wind and solar) in excess of 15% of their annual electricity generation; and many jurisdictions (e.g., Spain, Portugal, Ireland, Germany, and Denmark; and, in the United States, Colorado) have experienced instantaneous penetration levels of more than 50% variable generation.1 These penetration levels of variable RES-E have prompted many jurisdictions to begin modifying practices that evolved in an era of readily dispatchable, centralised power systems. Providing insights for the transition to high levels of variable RES-E generation is the focus of this document, which is the final report of the RES-E-NEXT project commissioned by the International Energy Agency’s implementing agreement on Renewable Energy Technology Deployment (IEA-RETD). It presents a comprehensive assessment of issues that will shape power system evolution during the transition to high levels of variable RES-E generation. While policy will be a central tool to sustain the growth of RES-E capacity and to enable power system transitions, the scope of the report extends beyond policy considerations to include the related domains of regulation, power market design, and system operation protocols. This broad scope is in recognition that a changing resource mix with greater penetration levels of variable RES-E has broad implications for grid operations, wholesale and retail power markets, and infrastructure needs. The next decade will be a critical transition period for power system stakeholders, as global deployment of RES-E capacity (and especially variable RES-E capacity) continues to scale-up in many regions of the world. To address increased penetration levels of RES-E in power systems

  9. Advancement of DOE's EnergyPlus Building Energy Simulation Payment

    SciTech Connect (OSTI)

    Gu, Lixing; Shirey, Don; Raustad, Richard; Nigusse, Bereket; Sharma, Chandan; Lawrie, Linda; Strand, Rick; Pedersen, Curt; Fisher, Dan; Lee, Edwin; Witte, Mike; Glazer, Jason; Barnaby, Chip

    2011-09-30

    EnergyPlus{sup TM} is a new generation computer software analysis tool that has been developed, tested, and commercialized to support DOE's Building Technologies (BT) Program in terms of whole-building, component, and systems R&D (http://www.energyplus.gov). It is also being used to support evaluation and decision making of zero energy building (ZEB) energy efficiency and supply technologies during new building design and existing building retrofits. The 5-year project was managed by the National Energy Technology Laboratory and was divided into 5 budget period between 2006 and 2011. During the project period, 11 versions of EnergyPlus were released. This report summarizes work performed by an EnergyPlus development team led by the University of Central Florida's Florida Solar Energy Center (UCF/FSEC). The team members consist of DHL Consulting, C. O. Pedersen Associates, University of Illinois at Urbana-Champaign, Oklahoma State University, GARD Analytics, Inc., and WrightSoft Corporation. The project tasks involved new feature development, testing and validation, user support and training, and general EnergyPlus support. The team developed 146 new features during the 5-year period to advance the EnergyPlus capabilities. Annual contributions of new features are 7 in budget period 1, 19 in period 2, 36 in period 3, 41 in period 4, and 43 in period 5, respectively. The testing and validation task focused on running test suite and publishing report, developing new IEA test suite cases, testing and validating new source code, addressing change requests, and creating and testing installation package. The user support and training task provided support for users and interface developers, and organized and taught workshops. The general support task involved upgrading StarTeam (team sharing) software and updating existing utility software. The project met the DOE objectives and completed all tasks successfully. Although the EnergyPlus software was enhanced significantly

  10. Subtask 2.17 - CO{sub 2} Storage Efficiency in Deep Saline Formations

    SciTech Connect (OSTI)

    Gorecki, Charles; Liu, Guoxiang; Braunberger, Jason; Klenner, Robert; Ayash, Scott; Dotzenrod, Neil; Steadman, Edward; Harju, John

    2014-02-01

    {sub 2} storage resource potential over very long periods of time in the two systems that were evaluated. These results indicate that the volumetric assessments can be used as long as the appropriate storage efficiency terms are used and it is understood that it will take many wells over very long periods of time to fully realize the storage potential of a target formation. This subtask was funded through the Energy & Environmental Research Center (EERC)– U.S. Department of Energy (DOE) Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FC26-08NT43291. Nonfederal funding was provided by the IEA Greenhouse Gas R&D Programme.

  11. U.S. Energy Information Administration (EIA)

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Nonmanufacturing sector Service sector rest of economy OECD 1.5 2.4 1.8 2 OECD ... DOEEIA-0383 (Washington, DC: April 2015). Rest of World: Oxford Economics, Global ...

  12. Oil and gas outlook

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2011 2012 2013 2014 2015 non-OECD consumption growth non-OECD GDP growth* Prices and economic growth are important, but policy, preferences, and technology may have a bigger...

  13. Energy & Financial Markets - Crudeoil - U.S. Energy Information

    Gasoline and Diesel Fuel Update (EIA)

    Administration (EIA) Non-OECD Oil consumption in developing countries that are not part of the Organization of Economic Cooperation and Development (OECD) has risen sharply in recent years. While oil consumption in the OECD countries declined between 2000 and 2010, non-OECD oil consumption increased more than 40 percent. China, India, and Saudi Arabia had the largest growth in oil consumption among the countries in the non-OECD during this period. Economic growth has a strong impact on oil

  14. Energy & Financial Markets - U.S. Energy Information Administration (EIA) -

    Gasoline and Diesel Fuel Update (EIA)

    U.S. Energy Information Administration (EIA) Non-OECD Oil consumption in developing countries that are not part of the Organization of Economic Cooperation and Development (OECD) has risen sharply in recent years. While oil consumption in the OECD countries declined between 2000 and 2010, non-OECD oil consumption increased more than 40 percent. China, India, and Saudi Arabia had the largest growth in oil consumption among the countries in the non-OECD during this period. Economic growth has

  15. SUBTASK 2.19 – OPERATIONAL FLEXIBILITY OF CO2 TRANSPORT AND STORAGE

    SciTech Connect (OSTI)

    Jensen, Melanie; Schlasner, Steven; Sorensen, James; Hamling, John

    2014-12-31

    experts represented a range of disciplines and hailed from North America and Europe. Major findings of the study are that compression and transport of CO2 for enhanced oil recovery (EOR) purposes in the United States has shown that impurities are not likely to cause transport problems if CO2 stream composition standards are maintained and pressures are kept at 10.3 MPa or higher. Cyclic, or otherwise intermittent, CO2 supplies historically have not impacted in-field distribution pipeline networks, wellbore integrity, or reservoir conditions. The U.S. EOR industry has demonstrated that it is possible to adapt to variability and intermittency in CO2 supply through flexible operation of the pipeline and geologic storage facility. This CO2 transport and injection experience represents knowledge that can be applied in future CCS projects. A number of gaps in knowledge were identified that may benefit from future research and development, further enhancing the possibility for widespread application of CCS. This project was funded through the Energy & Environmental Research Center–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FC26-08NT43291. Nonfederal funding was provided by the IEA Greenhouse Gas R&D Programme.

  16. OES-IA Annex IV: Environmental Effects of Marine and Hydrokinetic Devices - Report from the Experts’ Workshop September 27th – 28th 2010 Clontarf Castle, Dublin Ireland

    SciTech Connect (OSTI)

    Copping, Andrea E.; O'Toole, Michael J.

    2010-12-02

    An experts' workshop was convened in Dublin Ireland September 27th – 28th 2010 in support of IEA Ocean Energy Systems Implementing Agreement Annex IV. PNNL was responsible for organizing the content of the workshop, overseeing the contractors (Irish Marine Institute) hosting the event, presenting material on Annex IV and materials applicable to the workshop intent. PNNL is also overseeing a contractor (Wave Energy Center/University of Plymouth – WEC/UP) in the collection and analysis of the Annex IV data. Fifty-eight experts from 8 countries attended the workshop by invitation, spending two days discussing the needs of Annex IV. Presentations by DOE (background on Annex IV), PNNL (process for developing Annex IV; presentation of the draft database for PNNL project, plans for incorporating Annex IV data), WEC/UP on the environmental effect matrix, and four MHK developers (two from the UK, one from Ireland and one from Sweden; each discussing their own projects and lessons learned for measuring and mitigating environmental effects, as well as interactions with consenting [permitting] processes) helped provide background. The workshop participants worked part of the time in the large group and most of the time in four smaller breakout groups. Participants engaged in the process and provided a wealth of examples of MHK environmental work, particularly in the European nations. They provided practical and actionable advice on the following: • Developing the Annex IV database, with specific uses and audiences • Strong consensus that we should collect detailed metadata on available data sets, rather than attempting to draw in copious datasets. The participants felt there would then be an opportunity to then ask for specific set of data as needed, with specific uses and ownership of the data specified. This is particularly important as many data collected, particularly in Europe but also in Canada, are proprietary; developers were not comfortable with the idea of

  17. Certifying Industrial Energy Efficiency Performance: AligningManagement, Measurement, and Practice to Create Market Value

    SciTech Connect (OSTI)

    McKane, Aimee; Scheihing, Paul; Williams, Robert

    2007-07-01

    More than fifteen years after the launch of programs in theU.K. and U.S., industry still offers one of the largest opportunities forenergy savings worldwide. The International Energy Agency (IEA) estimatesthe savings potential from cost-optimization of industrial motor-drivensystems alone at 7 percent of global electricity use. The U.S. Departmentof Energy (USDOE) Industrial Technologies Program estimates 7 percentsavings potential in total US industrial energy use through theapplication of proven best practice. Simple paybacks for these types ofprojects are frequently two years or less. The technology required toachieve these savings is widely available; the technical skills requiredto identify energy saving opportunities are known and transferable.Although programs like USDOE's Best Practices have been highlysuccessful, most plants, as supported by 2002 MECS data, remain eitherunaware or unmotivated to improve their energy efficiency--as evidencedby the 98 percent of US industrial facilities reporting to MECS say thatthey lack a full-time energy manager. With the renewed interest in energyefficiency worldwide and the emergence of carbon trading and newfinancial instruments such as white certificates1, there is a need tointroduce greater transparency into the way that industrial facilitiesidentify, develop, and document energy efficiency projects. Historically,industrial energy efficiency projects have been developed by plantengineers, frequently with assistance from consultants and/or supplierswith highly specialized technical skills. Under this scenario,implementation of energy efficiency improvements is dependent onindividuals. These individuals typically include "champions" within anindustrial facility or corporation, working in cooperation withconsultants or suppliers who have substantial knowledge based on years ofexperience. This approach is not easily understood by others without thisspecialized technical knowledge, penetrates the market fairly slowly

  18. International petroleum statistics report, October 1997

    SciTech Connect (OSTI)

    1997-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 4 figs., 48 tabs.

  19. International petroleum statistics report, November 1993

    SciTech Connect (OSTI)

    Not Available

    1993-11-26

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992: and OECD trade from 1982 through 1992.

  20. Example Batch Scripts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Examining Future Global Transportation Energy Demand For EIA Energy Conference July 11, 2016 | Washington, DC By John Maples Outline * Model overview - Passenger travel - Freight travel - Energy consumption for 16 regions: * USA, Canada, Mexico/Chile, OECD Europe, Japan, S. Korea, Australia/New Zealand * Russia, Non-OECD Europe/Eurasia, China, India, Non-OECD Asia, Middle East, Africa, Brazil, Other South/Central * IEO2016 Reference case transportation projections * Preliminary scenario results

  1. Examining Future Global Energy Demand

    U.S. Energy Information Administration (EIA) Indexed Site

    Examining Future Global Transportation Energy Demand For EIA Energy Conference July 11, 2016 | Washington, DC By John Maples Outline * Model overview - Passenger travel - Freight travel - Energy consumption for 16 regions: * USA, Canada, Mexico/Chile, OECD Europe, Japan, S. Korea, Australia/New Zealand * Russia, Non-OECD Europe/Eurasia, China, India, Non-OECD Asia, Middle East, Africa, Brazil, Other South/Central * IEO2016 Reference case transportation projections * Preliminary scenario results

  2. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    This report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world, presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production, oil stocks, demand, and trade in OECD countries.

  3. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    This monthly publication provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  4. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1995-01-01

    This monthly publication provides current data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  5. Energy & Financial Markets - Petprod - U.S. Energy Information

    Gasoline and Diesel Fuel Update (EIA)

    Administration (EIA) Consumption Countries outside of the Organization for Economic Cooperation and Development (OECD) drove increases in global demand for petroleum products in recent years. In aggregate, non-OECD countries consumed more petroleum products than OECD countries for the first time in 2014. Global distillate consumption tends to rise as developing countries show robust economic growth because their economies tend to be driven by industry and manufacturing rather than services.

  6. Visualization of World Energy Supply | Open Energy Information

    Open Energy Info (EERE)

    isualizationofWorldEnergySupply Cost: Free OpenEI Keyword(s): Community Generated Language: English References: OECD1 Motion chart visualization of the world energy supply...

  7. United Nations Economic Commission for Africa | Open Energy Informatio...

    Open Energy Info (EERE)

    for Economic Co-operation and Development (OECD) Ministerial Consultation known as "The Big Table" . Started in 2000, a small group of African Ministers of Finance gather with...

  8. By:\tDr.\tNabil\tNasr

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Raworth, K. et al. Oxfam: Oxford, UK, 2012. OECD's Sustainable Manufacturing Toolkit Sustainability components Issue Areas Indicators category Social responsibility Material use ...

  9. OSTI, US Dept of Energy Office of Scientific and Technical Information...

    Office of Scientific and Technical Information (OSTI)

    in DOE technology and contains selected scientific and technical software from the Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD). ...

  10. Widget:Motion Chart Visualizations | Open Energy Information

    Open Energy Info (EERE)

    References usenergyconsumption: SED data usconsumption2010: SED data worldenergysupply: OECD data Retrieved from "http:en.openei.orgwindex.php?titleWidget:MotionChartVisuali...

  11. International Transport Forum | Open Energy Information

    Open Energy Info (EERE)

    ernationaltransportforum.orgaboutstaff.html "The International Transport Forum at the OECD is an intergovernmental organisation with 52 member countries. It acts as a strategic...

  12. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-08-01

    This report provides information on current international petroleum production, demand, imports, and stocks. World oil demand and OECD demand data are presented for the years 1970 thru 1995.

  13. Empowering Variable Renewables: Options for Flexible Electricity...

    Open Energy Info (EERE)

    additional fast response power plants, interconnection or storage. Much of existing transmission hardware in OECD countries was built in the middle of the last century, and a new...

  14. Monitoring and Tracking Long-Term Finance to Support Climate...

    Open Energy Info (EERE)

    Sector: Energy, Climate Topics: Finance, GHG inventory Resource Type: Publications, Lessons learnedbest practices Website: www.oecd.orgdataoecd575748073739.pdf Cost:...

  15. Low Emission Development Strategies (LEDS): Technical, Institutional...

    Open Energy Info (EERE)

    Energy, Land Topics: Low emission development planning Resource Type: Publications, Lessons learnedbest practices Website: www.oecd.orgdataoecd325846553489.pdf Low...

  16. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    4 Appendix H Table H18. World net hydroelectric electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 747 703 764 784 806 831 887 0.8 United States a 319 275 292 294 295 295 297 0.3 Canada 372 377 403 414 425 437 475 0.8 Mexico and Chile 57 51 68 76 86 99 114 2.9 OECD Europe 498 556 592 617 617 617 657 0.6 OECD Asia 128 115 127 131 135 143 153

  17. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    2 Appendix H Table H6. World installed hydroelectric and other renewable generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 273 293 372 396 424 460 507 2.0 United States a 168 185 233 240 252 273 301 1.8 Canada 85 87 106 114 123 132 144 1.8 Mexico and Chile 20 21 34 42 48 55 62 3.9 OECD Europe 337 372 514 534 553 594 626 1.9 OECD Asia 54 57 115 129 145 153

  18. Challenges in Alternative Energy Production

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... constrained by the flux Source: Tad Patzek, How Can We Outlive Our Way of Life?, OECD, Paris, 11-12 September 2007 Thebreakevencostsofenergy-input- ...

  19. Word Pro - S11

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    April 2015 April 2016 Note: OECD is the Organization for Economic Cooperation and Development. Web Page: http:www.eia.govtotalenergydatamonthlyinternational. Source: Table ...

  20. Demonstration and Deployment Workshop - Day 2

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Share of Global Energy Demand 1975 2010 2035 20% 40% 60% 80% 100% 6 030 Mtoe 12 380 Mtoe 16 730 Mtoe Rest of non-OECD Middle East India China OECD 2 12 10 8 6 4 2 0 36% 30% 24% 18% ...

  1. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    This document is a monthly publication that provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand and trade in OECD countries.

  2. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-10-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report presents data on international oil production, demand, imports, exports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world, in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  3. International petroleum statistics report

    SciTech Connect (OSTI)

    1998-01-01

    This monthly publication provides international oil data for January 1998. The report presents data on oil production, demand, imports, and stocks in four sections. Section 1 containes time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. section 3 presents data on oil imports by OECD countries. Section 4 containes annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  4. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    5 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H9. World installed geothermal generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 3 3 5 7 9 10 11 4.3 United States a 3 3 4 5 7 8 9 4.6 Canada 0 0 0 0 0 0 0 - Mexico and Chile 1 1 1 1 2 2 2 3.3 OECD

  5. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A14. World population by region, Reference case, 2011-40 (millions) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 484 489 523 544 564 581 597 0.7 United States a 312 315 334 347 359 370 380 0.7 Canada 34 35 38 39 41 43 44 0.8 Mexico and Chile 137 139 151 158 164 169 173 0.8 OECD Europe 548 550 565 571 576 579 581

  6. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A8. World nuclear energy consumption by region, Reference case, 2011-40 (billion kilowatthours) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 888 867 902 891 901 900 924 0.2 United States a 790 769 804 808 808 812 833 0.3 Canada 88 89 86 72 72 67 62 -1.3 Mexico and Chile 9 8 12 12 20 20 29 4.5 OECD Europe 861 837

  7. Microsoft PowerPoint - BP 2030 Outlook (EIA conference Apr 2011).ppt

    U.S. Energy Information Administration (EIA) Indexed Site

    BP Energy Outlook 2030 Washington, DC 26 April 2011 Energy Outlook 2030 2 © BP 2011 Global trends US particulars What can bend the trend? Outline Energy Outlook 2030 3 © BP 2011 Non-OECD economies drive consumption growth Billion toe Billion toe 0 2 4 6 8 10 12 14 16 18 1990 2000 2010 2020 2030 OECD Non-OECD 0 2 4 6 8 10 12 14 16 18 1990 2000 2010 2020 2030 Renewables Hydro Nuclear Coal Gas Oil * * Includes biofuels Energy Outlook 2030 4 © BP 2011 Gas and renewables win as fuel shares

  8. SEDS | OpenEI Community

    Open Energy Info (EERE)

    8 August, 2012 - 12:37 New Gapminder Visualizations Added EIA Energy data Gapminder OECD OpenEI SEDS Visualization Graph OpenEI now features some cool new Gapminder...

  9. Gapminder | OpenEI Community

    Open Energy Info (EERE)

    8 August, 2012 - 12:37 New Gapminder Visualizations Added EIA Energy data Gapminder OECD OpenEI SEDS Visualization Graph OpenEI now features some cool new Gapminder...

  10. Visualization Graph | OpenEI Community

    Open Energy Info (EERE)

    8 August, 2012 - 12:37 New Gapminder Visualizations Added EIA Energy data Gapminder OECD OpenEI SEDS Visualization Graph OpenEI now features some cool new Gapminder...

  11. Appendix A. Reference case projections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by region and end-use sector, High Oil Price case, 2010-40 (quadrillion Btu) Region History Projections Average annual percent change, 2010-40 2010 2020 2025 2030 2035 2040 OECD...

  12. International Petroleum Statistics Report, January 1994

    SciTech Connect (OSTI)

    Not Available

    1994-01-31

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992.

  13. fossil fuels | OpenEI Community

    Open Energy Info (EERE)

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  14. policy | OpenEI Community

    Open Energy Info (EERE)

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  15. energy scenarios | OpenEI Community

    Open Energy Info (EERE)

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  16. Four new publications help advance renewable energy development...

    Open Energy Info (EERE)

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  17. Organisation for Economic Co-Operation and Development Feed ...

    Open Energy Info (EERE)

    according to a new OECD report. Thu, 24 Sep 2015 17:36:00 GMT CLIMATE CHANGE: Support to fossil fuels remains high Government support to fossil fuel consumption and production in...

  18. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-12-01

    This report presents data on international oil production, demand, imports, and stocks. World oil production and OECD demand data are for the years 1970 through 1995; stocks from 1973 through 1995, and trade from 1985 through 1995.

  19. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    6 Appendix H Table H10. World installed solar generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 5 8 32 36 44 54 67 7.7 United States a 4 8 28 32 39 48 61 7.7 Canada 1 1 2 3 3 4 4 5.9 Mexico and Chile 0 0 2 2 2 2 3 14.4 OECD Europe 52 70 93 93 93 94 98 1.2 OECD Asia 7 9 45 51 57 59 60 6.9 Japan 5 7 38 43 48 49 49 7.4 South Korea 1 1 2 3 4 4 4 5.1 Australia

  20. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    2 Appendix H Table H16. World net nuclear electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 888 867 902 891 901 900 924 0.2 United States a 790 769 804 808 808 812 833 0.3 Canada 88 89 86 72 72 67 62 -1.3 Mexico and Chile 9 8 12 12 20 20 29 4.5 OECD Europe 861 837 845 879 930 948 896 0.2 OECD Asia 304 161 381 437 457 450 427 3.5 Japan 156 17

  1. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix H Table H2. World installed liquids-fred generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 125 121 108 98 92 87 85 -1.2 United States a 105 101 89 80 75 71 70 -1.3 Canada 4 4 4 4 4 4 3 -1.0 Mexico and Chile 16 16 14 14 13 12 12 -1.0 OECD Europe 50 50 47 45 43 41 39 -0.9 OECD Asia 58 59 54 52 49 47 45 -1.0 Japan 52 52 49 46 44 42 40 -1.0 South

  2. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    6 Appendix H Table H20. World net geothermal electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 22 21 37 49 64 75 85 5.0 United States a 15 16 27 39 52 62 70 5.5 Canada 0 0 0 0 0 0 0 - Mexico and Chile 7 6 10 10 11 13 15 3.5 OECD Europe 11 12 21 23 23 23 25 2.7 OECD Asia 9 9 17 18 20 22 25 3.9 Japan 3 3 3 3 3 3 3 0.1 South Korea 0 0 1 1 2 2 2

  3. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix H Table H22. World net other renewable electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 87 94 125 151 169 191 210 2.9 United States a 75 77 103 115 119 125 138 2.1 Canada 6 9 14 28 41 55 60 7.0 Mexico and Chile 6 8 8 8 9 11 13 1.8 OECD Europe 155 149 201 210 210 210 224 1.5 OECD Asia 28 37 60 71 80 84 87 3.1 Japan 23 33 38 44 50

  4. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    0 Appendix H Table H4. World installed coal-fred generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 333 327 279 276 272 272 271 -0.7 United States a 314 308 263 260 260 260 260 -0.6 Canada 10 10 7 7 3 3 2 -5.2 Mexico and Chile 9 9 9 9 9 9 9 -0.2 OECD Europe 197 198 207 200 194 188 183 -0.3 OECD Asia 109 112 117 113 111 109 110 -0.1 Japan 50 50 49 47 46 44 43

  5. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    4 Appendix H Table H8. World installed wind-powered generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 53 67 107 117 127 141 159 3.1 United States a 47 59 83 84 87 97 110 2.2 Canada 5 6 15 18 20 22 24 5.0 Mexico and Chile 1 2 9 16 19 22 25 10.1 OECD Europe 94 107 189 203 222 263 277 3.5 OECD Asia 6 6 24 29 37 40 44 7.2 Japan 2 3 3 5 8 8 8 4.1 South Korea 0 0

  6. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update (EIA)

    1. World energy consumption by country grouping, 2012-40 quadrillion Btu Region 2012 2020 2025 2030 2035 2040 Average annual percent change, 2012-40 OECD 238 254 261 267 274 282 0.6 Americas 118 126 128 131 134 138 0.6 Europe 81 85 87 90 93 96 0.6 Asia 39 43 45 46 47 48 0.8 OECD with U.S. CPP 238 252 258 265 272 280 0.6 OECD Americas with U.S. CPP 118 124 125 128 132 136 0.5 Non-OECD 311 375 413 451 491 533 1.9 Europe and Eurasia 51 52 55 56 58 58 0.5 Asia 176 223 246 270 295 322 2.2 Middle East

  7. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update (EIA)

    1. World coal production by region, 2012-40 million short tons Region/country 2012 2020 2025 2030 2035 2040 Average annual percent change, 2012-40 OECD 2,237 2,341 2,396 2,366 2,356 2,351 0.2 OECD with CPP 2,237 2,150 2,092 2,124 2,154 2,223 0 OECD Americas 1,107 1,125 1,143 1,122 1,122 1,096 0 OECD Americas with CPP 1,107 934 839 880 920 968 -0.5 United States 1,016 1,044 1,060 1,048 1,045 1,020 0 >United States with CPP 1,016 853 756 806 843 892 -0.5 Canada 73 67 70 60 63 61 -0.6

  8. Word Pro - S11

    Gasoline and Diesel Fuel Update (EIA)

    United States 0 4 8 12 16 20 24 May 2015 May 2016 Note: OECD is the Organization for Economic Cooperation and Development. Web Page: http:www.eia.govtotalenergydatamonthly...

  9. "U.S. Energy Information Administration"

    U.S. Energy Information Administration (EIA) Indexed Site

    A3. World gross domestic product (GDP) by region expressed in purchasing power parity, Reference case, 2011-40" "(Billion 2010 dollars)" ,"History",,,"Projections",,,,,"Average annual percent change, 2012-40" ,2011,2012,,2020,2025,2030,2035,2040 "OECD" " OECD Americas",18615.81,19080.01,,23390.4,26576.73,29942.41,33569.18,37770.22,2.468839681 " United

  10. "U.S. Energy Information Administration"

    U.S. Energy Information Administration (EIA) Indexed Site

    A4. World gross domestic product (GDP) by region expressed in market exchange rates, Reference case, 2011-40" "(Billion 2010 dollars)" ,"History",,,"Projections",,,,,"Average annual percent change, 2012-40" ,2011,2012,,2020,2025,2030,2035,2040 "OECD" " OECD Americas",18006.08,18440.48,,22566.11,25584.58,28756.54,32165.64,36119.79,2.430102421 " United

  11. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    Non-OECD Asia 168.2 175.9 222.7 246.4 269.9 295.1 322.1 2.2 China 109.4 115.0 147.3 159.4 ... Non-OECD Asia 26,261 27,914 44,139 56,222 69,542 84,680 102,015 4.7 China 13,286 14,309 ...

  12. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-11-01

    This document is a monthly publication which provides current data on international oil production,demand,imports and stocks. This report has four sections which contain time series data on world oil production and oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Also included is oil supply/demand balance information for the world, and data on oil imports and trade by OECD countries.

  13. Initial Modeling of a Pressurized Water Reactor Completed Using RELAP-7 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Initial Modeling of a Pressurized Water Reactor Completed Using RELAP-7 Initial Modeling of a Pressurized Water Reactor Completed Using RELAP-7 January 29, 2013 - 12:06pm Addthis Schematic of the OECD PWR benchmark used in the initial RELAP-7 demonstration Schematic of the OECD PWR benchmark used in the initial RELAP-7 demonstration RELAP-7 is a nuclear reactor system safety analysis code. Development started in October 2011, and during the past quarter the initial

  14. International Energy Outlook 2016-Executive Summary - Energy Information

    Gasoline and Diesel Fuel Update (EIA)

    Administration Executive Summary print version The outlook for energy use worldwide presented in the International Energy Outlook 2016 (IEO2016) continues to show rising levels of demand over the next three decades, led by strong increases in countries outside of the Organization for Economic Cooperation and Development (OECD) [3], particularly in Asia. Non-OECD Asia, including China and India, account for more than half of the world's total increase in energy consumption over the 2012 to

  15. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update (EIA)

    Chapter footnotes Preface 1. OECD includes all members of the organization as of January 1, 2016, in all the time series included in this report. Israel, which became a member in 2010, is included in OECD Europe for statistical reporting purposes. 2. Nonmarketed energy sources include selected energy consumption data for which the energy is not bought or sold, either directly or indirectly, as an input to marketed energy-particularly, traditional fuels such as fuelwood, charcoal, agricultural

  16. Microsoft PowerPoint - 2013_summer_fuels.pptx

    Gasoline and Diesel Fuel Update (EIA)

    S F l O tl k 2013 Summer Fuels Outlook April 9, 2013 www.eia.gov U.S. Energy Information Administration Independent Statistics & Analysis Key factors driving the short-term outlook * World liquid fuels consumption growth driven by emerging economies, with continuing consumption declines in OECD economies, with continuing consumption declines in OECD countries. * Non-OPEC supply growth, particularly in North America, pp y g , p y , expected to keep pace with world liquid fuels consumption

  17. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    OECD Asia 203 204 207 208 208 207 206 0.0 Japan 127 127 125 123 120 117 114 -0.4 South ... Non-OECD Asia 3,691 3,730 4,013 4,159 4,278 4,373 4,443 0.6 China 1,373 1,381 1,435 1,450 ...

  18. International petroleum statistics report, February 1999

    SciTech Connect (OSTI)

    1999-02-01

    The International petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970--1997; OECD stocks from 1973--1997; and OECD trade from 1987--1997.

  19. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. Word oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  20. International petroleum statistics report, April 1999

    SciTech Connect (OSTI)

    1999-05-04

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance fore the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 48 tabs.

  1. International petroleum statistics report, June 1995

    SciTech Connect (OSTI)

    1995-06-27

    The report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994. 4 figs., 45 tabs.

  2. International petroleum statistics report, February 1997

    SciTech Connect (OSTI)

    1997-02-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995. 4 figs., 47 tabs.

  3. International petroleum statistics report, January 1999

    SciTech Connect (OSTI)

    1999-01-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  4. International petroleum statistics report, November 1996

    SciTech Connect (OSTI)

    1996-11-01

    This report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995. 4 figs., 45 tabs.

  5. International petroleum statistics report, August 1995

    SciTech Connect (OSTI)

    1995-08-25

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  6. International petroleum statistics report, August 1998

    SciTech Connect (OSTI)

    1998-08-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 48 tabs.

  7. International petroleum statistics report, June 1998

    SciTech Connect (OSTI)

    1998-06-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 48 tabs.

  8. International petroleum statistics report, August 1994

    SciTech Connect (OSTI)

    Not Available

    1994-08-26

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1983 through 1993.

  9. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-11-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  10. International petroleum statistics report, March 1995

    SciTech Connect (OSTI)

    1995-03-30

    The International Petroleum Statistics Report presents data for March 1995 on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1983 through 1993.

  11. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-07-01

    The International Petroleum Statistics Report is a monthly publication that provides current international data. The report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent 12 months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

  12. International petroleum statistics report, November 1994

    SciTech Connect (OSTI)

    Not Available

    1994-11-25

    Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The International production, and on oil and stocks. The report has four sections. Section 1 contains time series data on world oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1983 through 1993.

  13. International petroleum statistics report, April 1998

    SciTech Connect (OSTI)

    1998-04-01

    The International Petroleum Statistics Report presents data on International oil production, demand, imports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1986 through 1996. 4 figs., 46 tabs.

  14. International petroleum statistics report, July 1999

    SciTech Connect (OSTI)

    1999-07-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1990, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years and annually for the three years prior to that. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1998; OECD stocks from 1973 through 1998; and OECD trade from 1988 through 1998. 4 figs., 44 tabs.

  15. International petroleum statistics report, December 1997

    SciTech Connect (OSTI)

    1997-12-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. The balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 4 figs., 46 tabs.

  16. International petroleum statistics report, November 1998

    SciTech Connect (OSTI)

    1998-11-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  17. International petroleum statistics report, October 1998

    SciTech Connect (OSTI)

    1998-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  18. International petroleum statistics report, May 1998

    SciTech Connect (OSTI)

    1998-05-01

    The International Petroleum Statistics report is a monthly publication that provides current international oil data. It presents data on international production, demand, imports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two year. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997, and OECD trade from 1987 through 1997. 4 fig., 48 tabs.

  19. International petroleum statistics report, September 1995

    SciTech Connect (OSTI)

    1995-09-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994. 4 figs., 45 tabs.

  20. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-05-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. Publication of this report is in keeping with responsibilities given the Energy Information Administration in Public Law 95-91. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  1. International petroleum statistics report, January 1992. [Contains Glossary

    SciTech Connect (OSTI)

    1992-01-01

    The International Petroleum Statistics Report presents data on international oil production, consumption, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil consumption and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1980, and monthly data for the most two years. Section 2 presents an oil supply/consumption balance for the market economies (i.e., non-communist countries). This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, consumption, and trade in OECD countries. World oil production and OECD consumption data are for the years 1970 through 1990; OECD stocks from 1973 through 1990; and OECD trade from 1982 through 1990.

  2. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-07-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  3. International petroleum statistics report, December 1993

    SciTech Connect (OSTI)

    Not Available

    1993-12-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992. 41 tabs.

  4. International petroleum statistics report, April 1994

    SciTech Connect (OSTI)

    Not Available

    1994-04-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1982 through 1992. 41 tables.

  5. International petroleum statistics report, February 1994

    SciTech Connect (OSTI)

    Not Available

    1994-02-28

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992.

  6. International petroleum statistics report, September 1996

    SciTech Connect (OSTI)

    1996-09-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  7. International petroleum statistics report, March 1998

    SciTech Connect (OSTI)

    1998-03-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

  8. International petroleum statistics report, September 1998

    SciTech Connect (OSTI)

    1998-09-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  9. International petroleum statistics report, June 1997

    SciTech Connect (OSTI)

    1997-06-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 46 tabs.

  10. International petroleum statistics report, April 1997

    SciTech Connect (OSTI)

    1997-04-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995. 4 figs., 47 tabs.

  11. International petroleum statistics report, May 1999

    SciTech Connect (OSTI)

    1999-05-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1990, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1998; OECD stocks from 1973 through 1998; and OECD trade from 1988 through 1998. 4 figs., 48 tabs.

  12. International petroleum statistics report, May 1995

    SciTech Connect (OSTI)

    1995-05-30

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1983 through 1993.

  13. International petroleum statistics report: April 1996

    SciTech Connect (OSTI)

    1996-04-01

    This report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1984 through 1994. 4 figs., 45 tabs.

  14. International petroleum statistics report, June 1999

    SciTech Connect (OSTI)

    1999-06-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1990, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years and annually for the three years prior to that. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1998; OECD stocks from 1973 through 1998; and OECD trade from 1988 through 1998. 4 figs., 46 tabs.

  15. International petroleum statistics report, February 1996

    SciTech Connect (OSTI)

    1996-02-28

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  16. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-05-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1084 through 1994.

  17. International petroleum statistics report, July 1998

    SciTech Connect (OSTI)

    1998-07-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  18. International petroleum statistics report, December 1998

    SciTech Connect (OSTI)

    1998-12-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  19. International petroleum statistics report, March 1999

    SciTech Connect (OSTI)

    1999-03-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1990, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years and annually for the three years prior to that. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarter data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 48 tabs.

  20. International petroleum statistics report, March 1994

    SciTech Connect (OSTI)

    1994-03-28

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992.

  1. International petroleum statistics report, February 1998

    SciTech Connect (OSTI)

    1998-02-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 4 figs., 48 tabs.

  2. A comparative analysis of accident risks in fossil, hydro, and nuclear energy chains

    SciTech Connect (OSTI)

    Burgherr, P.; Hirschberg, S.

    2008-07-01

    This study presents a comparative assessment of severe accident risks in the energy sector, based on the historical experience of fossil (coal, oil, natural gas, and LPG (Liquefied Petroleum Gas)) and hydro chains contained in the comprehensive Energy-related Severe Accident Database (ENSAD), as well as Probabilistic Safety Assessment (PSA) for the nuclear chain. Full energy chains were considered because accidents can take place at every stage of the chain. Comparative analyses for the years 1969-2000 included a total of 1870 severe ({>=} 5 fatalities) accidents, amounting to 81,258 fatalities. Although 79.1% of all accidents and 88.9% of associated fatalities occurred in less developed, non-OECD countries, industrialized OECD countries dominated insured losses (78.0%), reflecting their substantially higher insurance density and stricter safety regulations. Aggregated indicators and frequency-consequence (F-N) curves showed that energy-related accident risks in non-OECD countries are distinctly higher than in OECD countries. Hydropower in non-OECD countries and upstream stages within fossil energy chains are most accident-prone. Expected fatality rates are lowest for Western hydropower and nuclear power plants; however, the maximum credible consequences can be very large. Total economic damages due to severe accidents are substantial, but small when compared with natural disasters. Similarly, external costs associated with severe accidents are generally much smaller than monetized damages caused by air pollution.

  3. International petroleum statistics report, September 1994

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (ECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1983 through 1993.

  4. International petroleum statistics report, October 1993

    SciTech Connect (OSTI)

    Not Available

    1993-10-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1980, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1982 through 1992.

  5. World nuclear outlook 1994

    SciTech Connect (OSTI)

    1994-12-01

    As part of the EIA program to provide energy information, this analysis report presents the current status and projections through 2010 of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. It also contains information and forecasts of developments in the uranium market. Long-term projections of US nuclear capacity, generation, and spent fuel discharges for three different scenarios through 2040 are developed for the Department of Energy`s Office of Civilian Radioactive Waste Management (OCRWM). In turn, the OCRWM provides partial funding for preparation of this report. The projections of uranium requirements are provided to the Organization for Economic Cooperation and Development (OECD) for preparation of the Nuclear Energy Agency/OECD report, Summary of Nuclear Power and Fuel Cycle Data in OECD Member Countries.

  6. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update (EIA)

    2. World energy-related carbon dioxide emissions by region and country in the Reference case with and without the U.S. Clean Power Plan (CPP), 1990-2040 billion metric tons Region/Country 1990 2012 2020 2030 2040 Average annual percent change, 1990-2012 Average annual percent change, 2012-40 Total change, 2012-40 (billion metric tons) Percent change, 2012-40 OECD 11.6 12.8 13 13.3 13.8 0.4 0.3 1 8 OECD with CPP 11.6 12.8 12.7 12.7 13.3 0.4 0.1 0.5 3.9 OECD Americas 5.8 6.3 6.6 6.7 6.9 0.3 0.3

  7. World nuclear outlook 1995

    SciTech Connect (OSTI)

    1995-09-29

    As part of the EIA program to provide energy information, this analysis report presents the current status and projections through 2015 of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. It also contains information and forecasts of developments in the uranium market. Long-term projections of US nuclear capacity, generation, and spent fuel discharges for two different scenarios through 2040 are developed for the Department of Energy`s Office of Civilian Radioactive Waste Management (OCRWM). In turn, the OCRWM provides partial funding for preparation of this report. The projections of uranium requirements are provided to the Organization for Economic Cooperation and Development (OECD) for preparation of the Nuclear Energy Agency/OECD report, Summary of Nuclear Power and Fuel Cycle Data in OECD Member Countries.

  8. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix H Table H12. World total net electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 5,071 5,017 5,449 5,724 6,036 6,359 6,727 1.1 United States a 4,102 4,055 4,351 4,513 4,691 4,860 5,056 0.8 Canada 627 616 692 748 809 880 958 1.6 Mexico and Chile 342 346 406 463 535 618 713 2.6 OECD Europe 3,455 3,483 3,858 4,090 4,328 4,590 4,889 1.2

  9. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    0 Appendix H Table H14. World net natural gas-fred electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,234 1,446 1,396 1,600 1,840 2,048 2,237 1.6 United States a 1,014 1,228 1,117 1,223 1,371 1,478 1,569 0.9 Canada 61 63 97 136 187 230 272 5.3 Mexico and Chile 160 154 182 240 282 340 396 3.4 OECD Europe 766 645 655 746 905 1,056 1,321 2.6

  10. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    6 Appendix A Table A11. World carbon dioxide emissions from liquids use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 2,881 2,838 2,861 2,812 2,785 2,794 2,812 0.0 United States a 2,291 2,240 2,269 2,227 2,182 2,163 2,147 -0.2 Canada 289 291 291 289 290 295 304 0.2 Mexico and Chile 301 307 301 296 313 335 361 0.6 OECD Europe 1,969 1,903 1,823 1,804

  11. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    Reference case projections Table A12. World carbon dioxide emissions from natural gas use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,666 1,715 1,766 1,849 1,965 2,063 2,167 0.8 United States a 1,305 1,363 1,394 1,432 1,497 1,538 1,586 0.5 Canada 205 205 213 234 261 287 310 1.5 Mexico and Chile 156 147 158 184 207 238 271 2.2 OECD Europe 1,016 970

  12. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix A Table A13. World carbon dioxide emissions from coal use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 2,000 1,779 1,931 1,947 1,912 1,901 1,896 0.2 United States a 1,876 1,657 1,824 1,840 1,822 1,808 1,804 0.3 Canada 68 68 53 54 36 38 33 -2.5 Mexico and Chile 56 54 53 53 54 55 58 0.3 OECD Europe 1,208 1,251 1,228 1,244 1,219 1,195 1,178

  13. Buildings Energy Data Book: 1.4 Environmental Data

    Buildings Energy Data Book [EERE]

    6 World Carbon Dioxide Emissions Nation/Region 1990 2000 2010 1990-2000 2000-2010 China 2270 2850 8262 26% 2.3% 11.2% United States 5041 5862 5644 18% 1.5% -0.4% OECD Europe 4128 4191 4094 13% 0.2% -0.2% Other Non-OECD Asia 827 1339 1872 6% 4.9% 3.4% Russia (1) 3821 1556 1632 5% -8.6% 0.5% Middle East 730 1094 1692 5% 4.1% 4.5% India 579 1003 1602 5% 5.7% 4.8% Central & S. America 716 992 1150 4% 3.3% 1.5% Japan 1047 1201 1090 3% 1.4% -1.0% Africa 726 887 1107 4% 2.0% 2.2% Oth. Non-OECD

  14. International Petroleum Statistics Report, July 1994

    SciTech Connect (OSTI)

    Not Available

    1994-07-26

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1983 through 1993. Data for the United States are developed by the Energy Information Administration`s (EIA) Office of Oil and Gas. Data for other countries are derived largely from published sources, including International Energy Agency publications, the EIA International Energy Annual, and the trade press. (See sources after each section.) All data are reviewed by the International Statistics Branch of EIA. All data have been converted to units of measurement familiar to the American public. Definitions of oil production and consumption are consistent with other EIA publications.

  15. "U.S. Energy Information Administration"

    U.S. Energy Information Administration (EIA) Indexed Site

    A1. World total primary energy consumption by region, Reference case, 2011-2040" "(Quadrillion Btu)" ,"History",,,"Projections",,,,,,"Average annual percent change, 2012-40" "Region",2011,2012,,2020,2025,2030,2035,2040 "OECD" " OECD Americas",120.55,118.087,,125.703,128.075,130.713,133.813,138.132,,0.5615282239 " United Statesa",96.753,94.398,,100.842,101.969,102.872,103.846,105.729,,0.4056753945 "

  16. "U.S. Energy Information Administration"

    U.S. Energy Information Administration (EIA) Indexed Site

    A5. World liquids consumption by region, Reference case, 2011-40" "(Million barrels per day)" ,"History",,,"Projections",,,,,"Average annual percent change, 2012-40" ,2011,2012,,2020,2025,2030,2035,2040 "OECD" " OECD Americas",23.618,23.245,,24.408,24.352,24.297,24.396,24.648,0.2095252915 " United Statesa",18.863,18.466,,19.646,19.612,19.41,19.286,19.269,0.1521384118 "

  17. "U.S. Energy Information Administration"

    U.S. Energy Information Administration (EIA) Indexed Site

    A6. World natural gas consumption by region, Reference case, 2011-40" "(Trillion cubic feet)" ,"History",,,"Projections",,,,,"Average annual percent change, 2012-40" ,2011,2012,,2020,2025,2030,2035,2040 "OECD" " OECD Americas",30.762,31.823,,32.789,34.341,36.452,38.203,40.082,0.8274692465 " United Statesa",24.473,25.528,,26.142,26.881,28.08,28.819,29.702,0.5423170101 "

  18. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    C Low Economic Growth case projections This page inTenTionally lefT blank 47 U.S. Energy Information Administration | International Energy Outlook 2016 Low Economic Growth case projections Table C1. World total primary energy consumption by region, Low Economic Growth case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 123.3 123.9 124.7 126.3 128.8 0.3 United States a 96.8 94.4 98.7

  19. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    D High Oil Price case projections This page inTenTionally lefT blank 51 U.S. Energy Information Administration | International Energy Outlook 2016 High Oil Price case projections Table D1. World total primary energy consumption by region, High Oil Price case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 125.3 127.9 130.8 135.5 142.1 0.7 United States a 96.8 94.4 100.8 102.2 103.3

  20. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    I Reference case projections for natural gas production This page inTenTionally lefT blank 121 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for natural gas production Table I1. World total natural gas production by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 31.8 35.7 38.6 42.1 44.6 47.3 1.4 United States a 24.0 28.7

  1. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Kaya Identity factor projections Table J3. World gross domestic product (GDP) per capita by region expressed in purchasing power parity, Reference case, 2011-40 (2010 dollars per person) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 38,441 39,055 44,716 48,842 53,114 57,747 63,278 1.7 United States a 48,094 48,865 56,285 61,453 66,639 72,107

  2. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H1. World total installed generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,258 1,278 1,330 1,371 1,436 1,517 1,622 0.9 United States a 1,046 1,063 1,079 1,091 1,133 1,187 1,261 0.6 Canada 133 135

  3. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H11. World installed other renewable generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 41 42 45 49 52 57 59 1.2 United States a 36 37 39 39 39 40 41 0.4 Canada 4 4 5 8 12 15 16 4.9 Mexico and Chile 1 1

  4. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H13. World net liquids-fred electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 88 88 66 37 36 35 35 -3.3 United States a 30 23 18 18 18 18 18 -0.9 Canada 6 7 6 6 6 5 5 -1.0 Mexico and

  5. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H15. World net coal-fred electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,857 1,630 1,808 1,820 1,786 1,778 1,769 0.3 United States a 1,733 1,514 1,709 1,724 1,713 1,704 1,702 0.4

  6. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    Reference case projections for electricity capacity and generation by fuel Table H17. World net hydroelectric and other renewable electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,004 987 1,278 1,376 1,472 1,598 1,763 2.1 United States a 535 520 704 741 781 848 934 2.1 Canada 398 397 459 491 524 557 606 1.5 Mexico and Chile 71 69 115 144

  7. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    5 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H19. World net wind-powered electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 142 156 295 327 354 404 460 3.9 United States a 120 141 232 235 245 278 319 3.0 Canada 20 11 39 46 53 60 66

  8. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H21. World net solar electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 6 12 57 65 79 96 120 8.7 United States a 6 11 51 59 71 88 110 8.5 Canada 0 0 3 3 4 5 5 10.3 Mexico and Chile 0 0 3

  9. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H3. World installed natural-gas-fred generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 410 420 455 488 534 584 640 1.5 United States a 358 367 393 409 444 481 525 1.3 Canada 20 20 25 30 36 41 46 3.0

  10. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H5. World installed nuclear generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 115 117 115 113 115 114 118 0.0 United States a 102 102 101 101 102 102 105 0.1 Canada 13 14 12 10 10 10 9 -1.5 Mexico and

  11. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H7. World installed hydroelectric generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 171 171 183 187 192 198 210 0.7 United States a 78 78 80 80 80 80 80 0.1 Canada 75 75 83 85 88 90 99 1.0 Mexico and

  12. Appendix B: High Economic Growth case projections

    Gasoline and Diesel Fuel Update (EIA)

    B High Economic Growth case projections This page inTenTionally lefT blank 43 U.S. Energy Information Administration | International Energy Outlook 2016 High Economic Growth case projections Table B1. World total primary energy consumption by region, High Economic Growth case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 128.2 132.3 137.0 142.4 150.1 0.9 United States a 96.8 94.4

  13. Appendix C - Comments and Responses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Economic Growth case projections This page inTenTionally lefT blank 43 U.S. Energy Information Administration | International Energy Outlook 2016 High Economic Growth case projections Table B1. World total primary energy consumption by region, High Economic Growth case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 128.2 132.3 137.0 142.4 150.1 0.9 United States a 96.8 94.4 103.1

  14. Appendix A: Reference case projections

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... OECD Asia 5.7 5.5 5.4 5.3 5.1 4.9 4.8 -0.5 Japan 4.9 4.7 4.7 4.6 4.4 4.3 4.1 -0.5 South ... Non-OECD Asia 6.4 6.3 5.0 4.4 3.9 3.5 3.2 -2.4 China 8.2 8.0 6.4 5.4 4.7 4.1 3.7 -2.8 ...

  15. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    30 Appendix A Table A5. World liquids consumption by region, Reference case, 2011-40 (million barrels per day) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 23.6 23.2 24.4 24.4 24.3 24.4 24.6 0.2 United States a 18.9 18.5 19.6 19.6 19.4 19.3 19.3 0.2 Canada 2.3 2.4 2.4 2.4 2.4 2.4 2.5 0.2 Mexico and Chile 2.4 2.4 2.4 2.4 2.5 2.7 2.9 0.6 OECD Europe 14.5 14.1 13.7 13.6 13.7 13.8 14.0 0.0 OECD Asia 7.9 8.2 7.7 7.5 7.5 7.5

  16. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update (EIA)

    1. OECD and non-OECD net electricity generation by energy source, 2012-40 trillion kilowatthours Energy source by region 2012 2020 2025 2030 2035 2040 Average annual percent change, 2012-40 OECD 10.2 11.3 12 12.6 13.3 14.2 1.2 Petroleum and other liquids 0.4 0.2 0.1 0.1 0.1 0.1 -4.1 Natural gas 2.6 2.6 3 3.5 4 4.5 2 Coal 3.2 3.4 3.4 3.3 3.3 3.3 0 Nuclear 1.9 2.1 2.2 2.3 2.3 2.2 0.7 Renewables 2.2 3 3.2 3.4 3.7 4 2.2 OECD with CPP 10.2 11.3 11.8 12.5 13.2 14 1.1 Petroleum and other liquids 0.4

  17. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix J Table J2. World energy intensity by region, Reference case, 2011-40 (thousand Btu per 2010 dollar of GDP) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 6.5 6.2 5.4 4.8 4.4 4.0 3.7 -1.9 United States a 6.4 6.1 5.4 4.8 4.3 3.9 3.5 -2.0 Canada 10.4 10.2 8.9 8.3 7.8 7.5 7.1 -1.3 Mexico and Chile 4.2 4.0 3.4 3.1 2.9 2.8 2.7 -1.4 OECD Europe 4.4 4.4 3.9 3.7 3.5 3.3 3.2 -1.1 OECD Asia 5.7 5.5 5.4 5.3 5.1 4.9 4.8 -0.5

  18. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    2 Appendix A Table A7. World coal consumption by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 21.0 18.7 20.3 20.5 20.1 20.0 20.0 0.2 United States a 19.6 17.3 19.2 19.3 19.2 19.0 19.0 0.3 Canada 0.7 0.7 0.6 0.6 0.4 0.4 0.4 -2.5 Mexico and Chile 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.3 OECD Europe 12.9 13.4 13.2 13.3 13.1 12.8 12.6 -0.2 OECD Asia 9.7 9.7 10.2 10.1 10.1 10.1 10.1 0.1

  19. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    4 Appendix A Table A9. World consumption of hydroelectricity and other renewable energy by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 13.1 12.9 15.6 16.6 17.5 18.6 20.3 1.6 United States a 7.9 7.7 9.3 9.7 9.9 10.4 11.3 1.4 Canada 4.3 4.2 4.8 5.1 5.5 5.8 6.3 1.4 Mexico and Chile 0.9 1.0 1.5 1.8 2.1 2.4 2.7 3.7 OECD Europe 10.7 11.5 15.7 16.7 17.3 18.5 19.6 1.9 OECD Asia

  20. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update (EIA)

    1. World natural gas production by region and country in the Reference case, 2012-40 trillion cubic feet Region/country 2012 2020 2025 2030 2035 2040 Average annual percent change, 2012-40 OECD United Statesa 24.0 28.7 30.4 32.9 34.0 35.3 1.4 Canada 6.1 5.8 6.6 7.2 7.9 8.6 1.2 Europe 10.3 8.7 9.1 10.1 11.1 11.9 0.5 Australia/New Zealand 2.1 3.3 4.2 5.0 5.9 7.0 4.4 Other OECD 1.9 1.4 1.7 2.2 2.8 3.6 2.3 Total OECD 44.4 47.9 52.0 57.4 61.9 66.4 1.4 Non-OECD Russia 21.8 21.9 23.4 25.9 29.3 31.8 1.4